Hazard Analysis Guidelines for Transit Projects

DOT National Transportation Integrated Search

2000-01-01

These hazard analysis guidelines discuss safety critical systems and subsystems, types of hazard analyses, when hazard analyses should be performed, and the hazard analysis philosophy. These guidelines are published by FTA to assist the transit indus...

Synergies between geomorphic hazard and risk and sediment cascade research fields: exploiting geomorphic processes' susceptibility analyses to derive potential sediment sources in the Oltet, river catchment, southern Romania

NASA Astrophysics Data System (ADS)

Jurchescu, Marta-Cristina

2015-04-01

Identifying sediment sources and sediment availability represents a major problem and one of the first concerns in the field of sediment cascade. This paper addresses the on-site effects associated with sediment transfer, investigating the degree to which studies pertaining to the field of geomorphic hazard and risk research could be exploited in sediment budget estimations. More precisely, the paper investigates whether results obtained in assessing susceptibility to various geomorphic processes (landslides, soil erosion, gully erosion) could be transferred to the study of sediment sources within a basin. The study area is a medium-sized catchment (> 2400 km2) in southern Romania encompassing four different geomorphic units (mountains, hills, piedmont and plain). The region is highly affected by a wide range of geomorphic processes which supply sediments to the drainage network. The presence of a reservoir at the river outlet emphasizes the importance of estimating sediment budgets. The susceptibility analyses are conducted separately for each type of the considered processes in a top-down framework, i.e. at two different scales, using scale-adapted methods and validation techniques in each case, as widely-recognized in the hazard and risk research literature. The analyses start at a regional scale, which has in view the entire catchment, using readily available data on conditioning factors. In a second step, the suceptibility analyses are carried out at a medium scale for selected hotspot-compartments of the catchment. In order to appraise the extent to which susceptibility results are relevant in interpreting sediment sources at catchment scale, scale-induced differences are analysed in the case of each process. Based on the amount of uncertainty revealed by each regional-scale analysis in comparison to the medium-scale ones, decisions are made on whether the first are acceptable to the aim of identifying potential sediment source areas or if they should be refined using more precise methods and input data. The three final basin-wide susceptibility maps are eventually coverted, on a threshold basis, to maps showing the potential areas of sediment production by landslides, soil erosion and gully erosion respectively. These are then combined into one single map of potential sediment sources. The susceptibility assessments indicate that the basin compartments most prone to landslides and soil erosion correspond to the Subcarpathian hills, while the one most threatened by gully erosion corresponds to the piedmont relief. The final map of potential sediment sources shows that approximately 34% of the study catchment is occupied by areas potentially generating sediment through landslides and gully erosion, extending over most of the high piedmont and Subcarpathian hills. The results prove that there is an important link between the two research fields, i.e. geomorphic hazard and risk and sediment cascade, by allowing the transfer of knowledge from geomorphic processes' susceptibility analyses to the estimation of potential sediment sources within catchments. The synergy between the two fields raises further challenges to be tackled in future (e.g. how to derive sediment transfer rates from quantitative hazard estimates).

Mars Exploration Rovers Landing Dispersion Analysis

NASA Technical Reports Server (NTRS)

Knocke, Philip C.; Wawrzyniak, Geoffrey G.; Kennedy, Brian M.; Desai, Prasun N.; Parker, TImothy J.; Golombek, Matthew P.; Duxbury, Thomas C.; Kass, David M.

2004-01-01

Landing dispersion estimates for the Mars Exploration Rover missions were key elements in the site targeting process and in the evaluation of landing risk. This paper addresses the process and results of the landing dispersion analyses performed for both Spirit and Opportunity. The several contributors to landing dispersions (navigation and atmospheric uncertainties, spacecraft modeling, winds, and margins) are discussed, as are the analysis tools used. JPL's MarsLS program, a MATLAB-based landing dispersion visualization and statistical analysis tool, was used to calculate the probability of landing within hazardous areas. By convolving this with the probability of landing within flight system limits (in-spec landing) for each hazard area, a single overall measure of landing risk was calculated for each landing ellipse. In-spec probability contours were also generated, allowing a more synoptic view of site risks, illustrating the sensitivity to changes in landing location, and quantifying the possible consequences of anomalies such as incomplete maneuvers. Data and products required to support these analyses are described, including the landing footprints calculated by NASA Langley's POST program and JPL's AEPL program, cartographically registered base maps and hazard maps, and flight system estimates of in-spec landing probabilities for each hazard terrain type. Various factors encountered during operations, including evolving navigation estimates and changing atmospheric models, are discussed and final landing points are compared with approach estimates.

Preliminary hazards analysis -- vitrification process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coordes, D.; Ruggieri, M.; Russell, J.

1994-06-01

This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s constructionmore » and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.« less

The price of safety: costs for mitigating and coping with Alpine hazards

NASA Astrophysics Data System (ADS)

Pfurtscheller, C.; Thieken, A. H.

2013-10-01

Due to limited public budgets and the need to economize, the analysis of costs of hazard mitigation and emergency management of natural hazards becomes increasingly important for public natural hazard and risk management. In recent years there has been a growing body of literature on the estimation of losses which supported to help to determine benefits of measures in terms of prevented losses. On the contrary, the costs of mitigation are hardly addressed. This paper thus aims to shed some light on expenses for mitigation and emergency services. For this, we analysed the annual costs of mitigation efforts in four regions/countries of the Alpine Arc: Bavaria (Germany), Tyrol (Austria), South Tyrol (Italy) and Switzerland. On the basis of PPP values (purchasing power parities), annual expenses on public safety ranged from EUR 44 per capita in the Free State of Bavaria to EUR 216 in the Autonomous Province of South Tyrol. To analyse the (variable) costs for emergency services in case of an event, we used detailed data from the 2005 floods in the Federal State of Tyrol (Austria) as well as aggregated data from the 2002 floods in Germany. The analysis revealed that multi-hazards, the occurrence and intermixture of different natural hazard processes, contribute to increasing emergency costs. Based on these findings, research gaps and recommendations for costing Alpine natural hazards are discussed.

Rockfall hazard assessment of nearly vertical rhyolite tuff cliff faces by using terrestrial laser scanner, UAV and FEM analyses

NASA Astrophysics Data System (ADS)

Török, Ákos; Barsi, Árpád; Görög, Péter; Lovas, Tamás; Bögöly, Gyula; Czinder, Balázs; Vásárhelyi, Balázs; Molnár, Bence; József Somogyi, Árpád

2017-04-01

Nearly vertical rhyolite tuff cliff faces are located in NE-Hungary representing rock fall hazard in the touristic region of Sirok. Larger blocks of the cliff have fallen in recent years menacing tourists and human lives. The rhyolite tuff, that forms the Castle Hill was formed during Miocene volcanism and comprises of brecciated lapilli tuffs and tuffs with intercalating ignimbritic horizons. The paper focuses on the 3D mapping of cliff faces and modeling of rock fall hazard. The topography and 3D model of the cliff was obtained by using GNSS supported terrestrial laser scanner and UAV. With imaging techniques of UAV a Triangulated Irregular Network (TIN) model was developed that contained triangles with 5-10 cm side lengths. GNSS supported terrestrial laser scanning allowed the observation with a resolution 1-5 cm of point spacing. The point clouds were further processed and with the combination of laser scanner and UAV data a 3D model of the studied cliff faces were obtained. Geological parameters for rock fall analyses included both field observations and laboratory tests. The lithotypes were identified on the field and were sampled for rock mechanical laboratory analyses. Joint- and fault system was mapped and visualized by using Rocscience Dip. EN test methods were used to obtain the density properties of various lithotypes of rhyolite tuff. Other standardized EN tests included ultrasonic pulse velocity, water absorption, indirect tensile strength (Brasilian), uniaxial compressive strength and modulus of elasticity of air dry and of water saturated samples. GSI values were denoted based on filed observations and rock mass properties. The stability analyses of cliff faces were made by using 2D FEM software (Phase 2). Cross sections were evaluated and global factor of safety was also calculated. The modeled displacements were in the order of few centimeters; however several locations were pinpointed where wedge failure and planar slip surfaces were identified as major cliff stability hazards. These were associated with the major joint systems dissecting cliff faces. This research have proved that the combined methods of field surveying, imaging techniques, data processing and FEM modelling with rock mechanical laboratory analyses allowed the identification of major rock fall hazards even at areas which are difficult to access.

POHCS AND PICS SCREENING PROTOCOL

EPA Science Inventory

The report describes risk-driven analysis strategies and a tiered survey approach of analyses that should be useful for building data bases related to other waste combustion processes. NOTE: The need to characterize hazardous waste incinerator emissions for multiple organic compo...

Oxygen Compatibility Assessment of Components and Systems

NASA Technical Reports Server (NTRS)

Stoltzfus, Joel; Sparks, Kyle

2010-01-01

Fire hazards are inherent in oxygen systems and a storied history of fires in rocket engine propulsion components exists. To detect and mitigate these fire hazards requires careful, detailed, and thorough analyses applied during the design process. The oxygen compatibility assessment (OCA) process designed by NASA Johnson Space Center (JSC) White Sands Test Facility (WSTF) can be used to determine the presence of fire hazards in oxygen systems and the likelihood of a fire. This process may be used as both a design guide and during the approval process to ensure proper design features and material selection. The procedure for performing an OCA is a structured step-by-step process to determine the most severe operating conditions; assess the flammability of the system materials at the use conditions; evaluate the presence and efficacy of ignition mechanisms; assess the potential for a fire to breach the system; and determine the reaction effect (the potential loss of life, mission, and system functionality as the result of a fire). This process should be performed for each component in a system. The results of each component assessment, and the overall system assessment, should be recorded in a report that can be used in the short term to communicate hazards and their mitigation and to aid in system/component development and, in the long term, to solve anomalies that occur during engine testing and operation.

Assessing residential building values in Spain for risk analyses - application to the landslide hazard in the Autonomous Community of Valencia

NASA Astrophysics Data System (ADS)

Cantarino, I.; Torrijo, F. J.; Palencia, S.; Gielen, E.

2014-11-01

This paper proposes a method of valuing the stock of residential buildings in Spain as the first step in assessing possible damage caused to them by natural hazards. For the purposes of the study we had access to the SIOSE (the Spanish Land Use and Cover Information System), a high-resolution land-use model, as well as to a report on the financial valuations of this type of building throughout Spain. Using dasymetric disaggregation processes and GIS techniques we developed a geolocalized method of obtaining this information, which was the exposure variable in the general risk assessment formula. Then, with the application over a hazard map, the risk value can be easily obtained. An example of its application is given in a case study that assesses the risk of a landslide in the entire 23 200 km2 of the Valencia Autonomous Community (NUT2), the results of which are analysed by municipal areas (LAU2) for the years 2005 and 2009.

Analysis of a Hypergolic Propellant Explosion During Processing of Launch Vehicles in the VAB

NASA Technical Reports Server (NTRS)

Chrostowski, Jon D.; Gan Wenshui; Campbell, Michael D.

2010-01-01

NASA is developing launch vehicles to support missions to Low Earth Orbit (LEO), the moon and deep space. Whether manned or unmanned, the vehicle components will likely be integrated in the Vehicle Assembly Building (VAB) at Kennedy Space Center (KSC) and typically include a fueled spacecraft (SC) that sits on top of one or more stages. The processing of a fueled SC involves hazardous operations when it is brought into the VAB Transfer Aisle and lifted a significant height for mating with lower stages. Accidents resulting from these hazardous operations could impact unrelated personnel working in buildings adjacent to the VAB. Safe separation distances based on the DOD Explosives Standards Quantity-Distance (Q-D) approach result in large IBD arcs. This paper presents site-specific air blast and fragmentation hazard analyses for comparison with the Q-D arcs as well as consequence and risk analyses to provide added information for the decision maker. A new physics-based fragmentation model is presented that includes: a) the development of a primary fragment list (which defines the fragment characteristics) associated with a hypergolic propellant explosion, b) a description of a 3D fragment bounce model, c) the results of probabilistic Monte-Carlo simulations (that include uncertainties in the fragment characteristics) to determine: i) the hazardous fragment density distance, ii) the expected number of wall/roof impacts and penetrations to over 40 buildings adjacent to the VAB, and iii) the risk to building occupants.

Lidar-Based Rock-Fall Hazard Characterization of Cliffs

USGS Publications Warehouse

Collins, Brian D.; Greg M.Stock,

2017-01-01

Rock falls from cliffs and other steep slopes present numerous challenges for detailed geological characterization. In steep terrain, rock-fall source areas are both dangerous and difficult to access, severely limiting the ability to make detailed structural and volumetric measurements necessary for hazard assessment. Airborne and terrestrial lidar survey methods can provide high-resolution data needed for volumetric, structural, and deformation analyses of rock falls, potentially making these analyses straightforward and routine. However, specific methods to collect, process, and analyze lidar data of steep cliffs are needed to maximize analytical accuracy and efficiency. This paper presents observations showing how lidar data sets should be collected, filtered, registered, and georeferenced to tailor their use in rock fall characterization. Additional observations concerning surface model construction, volumetric calculations, and deformation analysis are also provided.

49 CFR 107.807 - Approval of non-domestic chemical analyses and tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Approval of non-domestic chemical analyses and tests. 107.807 Section 107.807 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM...

Cost assessment of natural hazards in Europe - state-of-the-art, knowledge gaps and recommendations

NASA Astrophysics Data System (ADS)

Meyer, V.; Becker, N.; Markantonis, V.; Schwarze, R.; van den Bergh, J. C. J. M.; Bouwer, L. M.; Bubeck, P.; Ciavola, P.; Thieken, A. H.; Genovese, E.; Green, C.; Hallegatte, S.; Kreibich, H.; Lequeux, Q.; Viavattenne, C.; Logar, I.; Papyrakis, E.; Pfurtscheller, C.; Poussin, J.; Przyluski, V.

2012-04-01

Effective and efficient reduction of natural hazard risks requires a thorough understanding of the costs of natural hazards in order to develop sustainable risk management strategies. The current methods that assess the costs of different natural hazards employ a diversity of terminologies and approaches for different hazards and impacted sectors. This makes it difficult to arrive at robust, comprehensive and comparable cost figures. The CONHAZ (Costs of Natural Hazards) project aimed to compile and synthesise current knowledge on cost assessment methods in order to strengthen the role of cost assessments in the development of integrated natural hazard management and adaptation planning. In order to achieve this, CONHAZ has adopted a comprehensive approach, considering natural hazards ranging from droughts, floods and coastal hazards to Alpine hazards, as well as different impacted sectors and cost types. Its specific objectives have been 1) to compile the state-of-the-art methods for cost assessment; 2) to analyse and assess these methods in terms of technical aspects, as well as terminology, data quality and availability, and research gaps; and 3) to synthesise resulting knowledge into recommendations and to identify further research needs. This presentation summarises the main results of CONHAZ. CONHAZ differentiates between direct tangible damages, losses due to business interruption, indirect damages, intangible effects, and costs of risk mitigation. It is shown that the main focus of cost assessment methods and their application in practice is on direct costs, while existing methods for assessing intangible and indirect effects are rather rarely applied and methods for assessing indirect effects often cannot be used on the scale of interest (e.g. the regional scale). Furthermore, methods often focus on single sectors and/or hazards, and only very few are able to reflect several sectors or multiple hazards. Process understanding and its use in cost assessment is poor, leading to highly uncertain results. However, sensitivity and uncertainty analyses as well as validations are hardly undertaken. Important recommendations are that cost assessment can be made more comprehensive by including indirect and intangible effects. Furthermore, the importance is highlighted of identifying sources of uncertainties, of reducing them effectively and of documenting remaining ones. One source of uncertainty concerns data sources. A framework for supporting data collection on the European level ensuring minimum data quality standards would facilitate the development and consistency of European and national databases. Furthermore, an improvement of methods is needed with regard to a better understanding and modelling of the damaging processes. In particular, there is a need for a better understanding of the economic response to external shocks and to improve models for indirect cost assessment based on this. Also models to estimate direct economic damage need to be based on more knowledge about the complex processes leading to damages. Moreover, the dynamics of risk due to climate and socio-economic change have to be better considered in the models in order to unveil uncertainties about future developments in the costs of natural hazards. Finally, there is a need for appropriate and transparent tools and guidance to support decision makers in the integration of uncertain cost assessment figures into decision making.

A Guide to the Application of Probability Risk Assessment Methodology and Hazard Risk Frequency Criteria as a Hazard Control for the Use of the Mobile Servicing System on the International Space Station

NASA Astrophysics Data System (ADS)

D'silva, Oneil; Kerrison, Roger

2013-09-01

A key feature for the increased utilization of space robotics is to automate Extra-Vehicular manned space activities and thus significantly reduce the potential for catastrophic hazards while simultaneously minimizing the overall costs associated with manned space. The principal scope of the paper is to evaluate the use of industry standard accepted Probability risk/safety assessment (PRA/PSA) methodologies and Hazard Risk frequency Criteria as a hazard control. This paper illustrates the applicability of combining the selected Probability risk assessment methodology and hazard risk frequency criteria, in order to apply the necessary safety controls that allow for the increased use of the Mobile Servicing system (MSS) robotic system on the International Space Station. This document will consider factors such as component failure rate reliability, software reliability, and periods of operation and dormancy, fault tree analyses and their effects on the probability risk assessments. The paper concludes with suggestions for the incorporation of existing industry Risk/Safety plans to create an applicable safety process for future activities/programs

The Atlas of Natural Hazards and Risks of Austria: first results for fluvial and pluvial floods

NASA Astrophysics Data System (ADS)

Mergili, Martin; Tader, Andreas; Glade, Thomas; Neuhold, Clemens; Stiefelmeyer, Heinz

2015-04-01

Incoherent societal adaptation to natural processes results in significant losses every year. A better knowledge of the spatial and temporal distribution of hazards and risks, and of particular hot spots in a given region or period, is essential for reducing adverse impacts. Commonly, different hazard and risk estimations are performed within individual approaches based on tailor-made concepts. This works well as long as specific cases are considered. The advantage of such a procedure is that each individual hazard and risk is addressed in the best possible manner. The drawback, however, consists in the fact that the results differ significantly in terms of quality and accuracy and therefore cannot be compared. Hence, there is a need to develop a strategy and concept which uses similar data sources of equivalent quality in order to adequately analyze the different natural hazards and risks at broader scales. The present study is aiming to develop such a platform. The project Risk:ATlas focuses on the design of an atlas visualizing the most relevant natural hazards and, in particular, possible consequences for the entire territory of Austria. Available as a web-based tool and as a printed atlas, it is seen as a key tool to improve the basis for risk reduction, risk adaptation and risk transfer. The atlas is founded on those data sets available for the entire territory of Austria at a consistent resolution and quality. A 1 m resolution DEM and the official cadastre and building register represent the core, further data sets are employed according to the requirements for each natural hazard and risk. In this contribution, the methodology and the preliminary results for fluvial and pluvial floods and their consequences to buildings for three selected test areas in different types of landscapes (rural, urban and mountainous) are presented. Flooding depths expected for annualities of 30, 100 and 300 are derived from existing data sets for fluvial floods and are computed using the model FloodArea for pluvial floods. Land cover parameters necessary for flood routing are deduced from the official cadastre. The values exposed to each flood scenario are quantified on the basis of objects. In this study, the focus is on buildings, thus the official building register is employed as a major data source. The same register is used to derive the vulnerability of each building with regard to floods. Combining exposed values and vulnerability, the risk for each building, expressed as the expected damage per unit of time, is derived. Furthermore, a methodology to automatically regionalize the object-based hazards, exposures, vulnerabilities and risks to any spatial unit desired is presented. This enables us (i) to adapt the web-based atlas to different zooming levels and to flexibly react to (ii) the needs of the users of the atlas and (iii) the availability of reference data for validation of the analyses. The next steps will include (1) extending the analyses for fluvial and pluvial floods to the entire territory of Austria, employing advanced computational techniques such as the use of a cluster; (2) deriving hazards, exposures, vulnerabilities and risks related to a variety of other hazardous processes as well as to chains and combinations of processes (multi-hazard); (3) considering the consequences of hazardous processes not only for buildings, but also for infrastructures and even humans; and (4) elaborating future scenarios, based on possible environmental (including climatic) and socio-economic changes.

Job Hazard Analyses for Musculoskeletal Disorder Risk Factors in Pressing Operations of Dry-cleaning Establishments.

PubMed

Park, Jung-Keun

2016-12-01

Job hazard analyses were conducted to assess exposure to musculoskeletal disorder (MSD) risk factors in seven workers of three dry-cleaning establishments. In accordance with the Washington State Ergonomics Rule, the analyses were performed in two separate steps: (1) observation and checklist approaches were made to identify a "caution zone job" in the seven workers' pressing operations across the three shops; and (2) detailed posture and motion analyses were undertaken to determine a "MSD hazard" in one worker's operation using a video technique. One "caution zone job" was identified and it was the pressing operation job in which five physical risk factors were found in the pressing operations. The detailed analyses confirmed that one "MSD hazard", i.e., awkward posture in shoulders, was prevalent in the pressing operations of the three dry-cleaning facilities. It would be desirable to reduce MSD risk factors including awkward shoulder posture in the dry-cleaning industry.

Implementing Software Safety in the NASA Environment

NASA Technical Reports Server (NTRS)

Wetherholt, Martha S.; Radley, Charles F.

1994-01-01

Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of the system to be built. Shortly thereafter, as the system requirements are being defined, the second iteration of hazard analyses takes place, the systems hazard analysis (SHA). During the systems requirements phase, decisions are made as to what functions of the system will be the responsibility of software. This is the most critical time to affect the safety of the software. From this point, software safety analyses as well as software engineering practices are the main focus for assuring safe software. While many of the steps proposed in this paper seem like just sound engineering practices, they are the best technical and most cost effective means to assure safe software within a safe system.

Causal Mediation Analysis of Survival Outcome with Multiple Mediators.

PubMed

Huang, Yen-Tsung; Yang, Hwai-I

2017-05-01

Mediation analyses have been a popular approach to investigate the effect of an exposure on an outcome through a mediator. Mediation models with multiple mediators have been proposed for continuous and dichotomous outcomes. However, development of multimediator models for survival outcomes is still limited. We present methods for multimediator analyses using three survival models: Aalen additive hazard models, Cox proportional hazard models, and semiparametric probit models. Effects through mediators can be characterized by path-specific effects, for which definitions and identifiability assumptions are provided. We derive closed-form expressions for path-specific effects for the three models, which are intuitively interpreted using a causal diagram. Mediation analyses using Cox models under the rare-outcome assumption and Aalen additive hazard models consider effects on log hazard ratio and hazard difference, respectively; analyses using semiparametric probit models consider effects on difference in transformed survival time and survival probability. The three models were applied to a hepatitis study where we investigated effects of hepatitis C on liver cancer incidence mediated through baseline and/or follow-up hepatitis B viral load. The three methods show consistent results on respective effect scales, which suggest an adverse estimated effect of hepatitis C on liver cancer not mediated through hepatitis B, and a protective estimated effect mediated through the baseline (and possibly follow-up) of hepatitis B viral load. Causal mediation analyses of survival outcome with multiple mediators are developed for additive hazard and proportional hazard and probit models with utility demonstrated in a hepatitis study.

Environmental characteristics, agricultural land use, and vulnerability to degradation in Malopolska Province (Poland).

PubMed

Nowak, Agnieszka; Schneider, Christian

2017-07-15

Environmental degradation encompasses multiple processes that are rarely combined in analyses. This study refers to three types of environmental degradation resulting from agricultural activity: soil erosion, nutrient loss, and groundwater pollution. The research was conducted in seven distinct study areas in the Malopolska Province, Poland, each characterized by different environmental properties. Calculations were made on the basis of common models, i.e., USLE (soil erosion), InVEST (nutrient loss), and DRASTIC (groundwater pollution). Two scenarios were calculated to identify the areas contributing to potential and actual degradation. For the potential degradation scenario all study areas were treated as arable land. To identify the areas actually contributing to all three types of degradation, the de facto land use pattern was used for a second scenario. The results show that the areas most endangered by agricultural activity are located in the mountainous region, whereas most of the degraded zones were located in valley bottoms and areas with intensive agriculture. The different hazards rarely overlap spatially in the given study areas - meaning that different areas require different management approaches. The distribution of arable land was negatively correlated with soil erosion hazard, whereas no linkage was found between nutrient loss or groundwater pollution hazards and the proportion of arable land. This indicates that the soil erosion hazard is the most influential factor in the distribution of arable land, whereas nutrient loss and groundwater pollution is widely ignored during land use decision-making. Slope largely and most frequently influences all hazard types, whereas land use also played an important role in the case of soil and nutrient losses. In this study we presented a consistent methodology to capture complex degradation processes and provide robust indicators which can be included in existing impact assessment approaches like Life Cycle Assessments and Grey Water Footprint analyses. Copyright © 2017 Elsevier B.V. All rights reserved.

E-research platform of EPOS Thematic Core Service "ANTHROPOGENIC HAZARDS"

NASA Astrophysics Data System (ADS)

Orlecka-Sikora, Beata; Lasocki, Stanisław; Grasso, Jean Robert; Schmittbuhl, Jean; Kwiatek, Grzegorz; Garcia, Alexander; Cassidy, Nigel; Sterzel, Mariusz; Szepieniec, Tomasz; Dineva, Savka; Biggare, Pascal; Saccorotti, Gilberto; Sileny, Jan; Fischer, Tomas

2016-04-01

EPOS Thematic Core Service ANTHROPOGENIC HAZARDS (TCS AH) aims to create new research opportunities in the field of anthropogenic hazards evoked by exploitation of georesources. TCS AH, based on the prototype built in the framework of the IS-EPOS project (https://tcs.ah-epos.eu/), financed from Polish structural funds (POIG.02.03.00-14-090/13-00), is being further developed within EPOS IP project (H2020-INFRADEV-1-2015-1, INFRADEV-3-2015). TCS AH is designed as a functional e-research environment to ensure a researcher the maximum possible freedom for in silico experimentation by providing a virtual laboratory in which researcher will be able to create own workspace with own processing streams. The unique integrated RI is: (i) data gathered in the so- called "episodes", comprehensively describing a geophysical process, induced or triggered by human technological activity, which under certain circumstances can become hazardous for people, infrastructure and the environment and (ii) problem-oriented, specific high-level services, with the particular attention devoted to methods analyzing correlations between technology, geophysical response and resulting hazard. Services to be implemented are grouped within six blocks: (1) Basic services for data integration and handling; (2) Services for physical models of stress/strain changes over time and space as driven by geo-resource production; (3) Services for analysing geophysical signals; (4) Services to extract the relation between technological operations and observed induced seismic/deformation; (5) Services to quantitative probabilistic assessments of anthropogenic seismic hazard - statistical properties of anthropogenic seismic series and their dependence on time-varying anthropogenesis; ground motion prediction equations; stationary and time-dependent probabilistic seismic hazard estimates, related to time-changeable technological factors inducing the seismic process; (6) Simulator for Multi-hazard/multi-risk assessment in ExploRation/exploitation of GEoResources (MERGER) - numerical estimate of the occurrence probability of chains of events or processes impacting the environment. TCS AH will also serve the public sector expert knowledge and background information. In order to fulfill this aim the services for outreach, dissemination & communication will be implemented. From the technical point of view the implementation of services will proceed according to the methods worked within the mentioned before IS-EPOS project. The detailed workflows of implementation process of aforementioned services & interaction between user & TCS AH have been already prepared.

Afghanistan Multi-Risk Assessment to Natural Hazards

NASA Astrophysics Data System (ADS)

Diermanse, Ferdinand; Daniell, James; Pollino, Maurizio; Glover, James; Bouwer, Laurens; de Bel, Mark; Schaefer, Andreas; Puglisi, Claudio; Winsemius, Hessel; Burzel, Andreas; Ammann, Walter; Aliparast, Mojtaba; Jongman, Brenden; Ranghieri, Federica; Fallesen, Ditte

2017-04-01

The geographical location of Afghanistan and years of environmental degradation in the country make Afghanistan highly prone to intense and recurring natural hazards such as flooding, earthquakes, snow avalanches, landslides, and droughts. These occur in addition to man-made disasters resulting in the frequent loss of live, livelihoods, and property. Since 1980, disasters caused by natural hazards have affected 9 million people and caused over 20,000 fatalities in Afghanistan. The creation, understanding and accessibility of hazard, exposure, vulnerability and risk information is key for effective management of disaster risk. This is especially true in Afghanistan, where reconstruction after recent natural disasters and military conflicts is on-going and will continue over the coming years. So far, there has been limited disaster risk information produced in Afghanistan, and information that does exist typically lacks standard methodology and does not have uniform geo-spatial coverage. There are currently no available risk assessment studies that cover all major natural hazards in Afghanistan, which can be used to assess the costs and benefits of different resilient reconstruction and disaster risk reduction strategies. As a result, the Government of Afghanistan has limited information regarding current and future disaster risk and the effectiveness of policy options on which to base their reconstruction and risk reduction decisions. To better understand natural hazard and disaster risk, the World Bank and Global Facility for Disaster Reduction and Recovery (GFDRR) are supporting the development of new fluvial flood, flash flood, drought, landslide, avalanche and seismic risk information in Afghanistan, as well as a first-order analysis of the costs and benefits of resilient reconstruction and risk reduction strategies undertaken by the authors. The hazard component is the combination of probability and magnitude of natural hazards. Hazard analyses were carried out separately for each peril. Several models were implemented used to simulate the relevant processes involved. These models were fed by global and local climate data and geological data like elevation, slope, land use, soil characteristics etc. Exposure is a measure of the assets and population at risk. An extensive data collection and processing effort was carried out to derive nation-wide exposure data. Vulnerability is a measure of potential exposure losses if a hazardous event occurs. Vulnerability analyses were carried out separately for each peril, because of differences in impact characteristics. Damage functions were derived from asset characteristics and/or experiences from (international) literature. The main project output consists of tables and (GIS-) maps of hazard, exposure and risk. Tables present results at the nation-wide level (admin0), province level (admin1) and district level (admin2). Hazard maps are provided for various return periods, including 10, 20, 50, 100, 250, 500 and 1000 years. All maps are stored in a Web-based GIS-platform. This platform contains four separate directories with [1] generic data (catchment boundaries, rivers etc), [2] hazard maps, [3] exposure maps and [4] risk maps for each of the considered perils.

The dilemma in prioritizing chemicals for environmental analysis: known versus unknown hazards.

PubMed

Anna, Sobek; Sofia, Bejgarn; Christina, Rudén; Magnus, Breitholtz

2016-08-10

A major challenge for society is to manage the risks posed by the many chemicals continuously emitted to the environment. All chemicals in production and use cannot be monitored and science-based strategies for prioritization are essential. In this study we review available data to investigate which substances are included in environmental monitoring programs and published research studies reporting analyses of chemicals in Baltic Sea fish between 2000 and 2012. Our aim is to contribute to the discussion of priority settings in environmental chemical monitoring and research, which is closely linked to chemical management. In total, 105 different substances or substance groups were analyzed in Baltic Sea fish. Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were the most studied substances or substance groups. The majority, 87%, of all analyses comprised 20% of the substances or substance groups, whereas 46 substance groups (44%) were analyzed only once. Almost three quarters of all analyses regarded a POP-substance (persistent organic pollutant). These results demonstrate that the majority of analyses on environmental contaminants in Baltic Sea fish concern a small number of already regulated chemicals. Legacy pollutants such as POPs pose a high risk to the Baltic Sea due to their hazardous properties. Yet, there may be a risk that prioritizations for chemical analyses are biased based on the knowns of the past. Such biases may lead to society failing in identifying risks posed by yet unknown hazardous chemicals. Alternative and complementary ways to identify priority chemicals are needed. More transparent communication between risk assessments performed as part of the risk assessment process within REACH and monitoring programs, and information on chemicals contained in consumer articles, would offer ways to identify chemicals for environmental analysis.

The need for comprehensive vulnerability approaches to mirror the multiplicity in mountain hazard risk

NASA Astrophysics Data System (ADS)

Keiler, Margreth; Fuchs, Sven

2014-05-01

The concept of vulnerability is pillared by multiple disciplinary theories underpinning either a technical or a social origin of the concept and resulting in a range of paradigms for vulnerability quantification. By taking a natural scientific approach we argue that a large number of studies have focused either on damage-loss functions for individual mountain hazards or on semi-quantitative indicator-based approaches for multiple hazards (hazard chains). However, efforts to reduce susceptibility to hazards and to create disaster-resilient communities require intersections among these approaches, as well as among theories originating in natural and social sciences, since human activity cannot be seen independently from the environmental setting. Acknowledging different roots of disciplinary paradigms in risk management, issues determining structural, economic, institutional and social vulnerability have to be more comprehensively addressed in the future with respect to mountain hazards in Europe and beyond. It is argued that structural vulnerability as originator results in considerable economic vulnerability, generated by the institutional settings of dealing with natural hazards and shaped by the overall societal framework. If vulnerability and its counterpart, resilience, is analysed and evaluated by using such a comprehensive approach, a better understanding of the vulnerability-influencing parameters could be achieved, taking into account the interdependencies and interactions between the disciplinary foci. As a result, three key issues should be addressed in future research: (1) Vulnerability requires a new perspective on the relationship between society and environment: not as a duality, but more as a mutually constitutive relationship (including methods for assessment). (2) There is a need for concepts of vulnerability that emphasise the dynamics of temporal and spatial scales, particularly with respect to Global Change processes in mountain regions. (3) Loss and damage is part of a process in which interactions of climate change with societal processes shape and transform human societies. They are part of the human-environment interaction that needs assessment and adaptation.

Large-scale experiments for the vulnerability analysis of buildings impacted and intruded by fluviatile torrential hazard processes

NASA Astrophysics Data System (ADS)

Sturm, Michael; Gems, Bernhard; Fuchs, Sven; Mazzorana, Bruno; Papathoma-Köhle, Maria; Aufleger, Markus

2016-04-01

In European mountain regions, losses due to torrential hazards are still considerable high despite the ongoing debate on an overall increasing or decreasing trend. Recent events in Austria severely revealed that due to technical and economic reasons, an overall protection of settlements in the alpine environment against torrential hazards is not feasible. On the side of the hazard process, events with unpredictable intensities may represent overload scenarios for existent protection structures in the torrent catchments. They bear a particular risk of significant losses in the living space. Although the importance of vulnerability is widely recognised, there is still a research gap concerning its assessment. Currently, potential losses at buildings due to torrential hazards and their comparison with reinstatement costs are determined by the use of empirical functions. Hence, relations of process intensities and the extent of losses, gathered by the analysis of historic hazard events and the information of object-specific restoration values, are used. This approach does not represent a physics-based and integral concept since relevant and often crucial processes, as the intrusion of the fluid-sediment-mixture into elements at risk, are not considered. Based on these findings, our work is targeted at extending these findings and models of present risk research in the context of an integral, more physics-based vulnerability analysis concept. Fluviatile torrential hazard processes and their impacts on the building envelope are experimentally modelled. Material intrusion processes are thereby explicitly considered. Dynamic impacts are gathered quantitatively and spatially distributed by the use of a large set of force transducers. The experimental tests are accomplished with artificial, vertical and skewed plates, including also openings for material intrusion. Further, the impacts on specific buildings within the test site of the work, the fan apex of the Schnannerbach torrent in Tyrol (Austria), are analysed in detail. A couple of buildings are entirely reconstructed within the physical scale model at the scale 1:30. They include basement and first floor and thereby all relevant openings on the building envelopes. The results from experimental modelling represent the data basis for further physics-based vulnerability analysis. Hence, the applied vulnerability analysis concept significantly extends the methods presently used in flood risk assessment. The results of the study are of basic importance for practical application, as they provide extensive information to support hazard zone mapping and management, as well as the planning of local technical protection measures.

Making the Hubble Space Telescope servicing mission safe

NASA Technical Reports Server (NTRS)

Bahr, N. J.; Depalo, S. V.

1992-01-01

The implementation of the HST system safety program is detailed. Numerous safety analyses are conducted through various phases of design, test, and fabrication, and results are presented to NASA management for discussion during dedicated safety reviews. Attention is given to the system safety assessment and risk analysis methodologies used, i.e., hazard analysis, fault tree analysis, and failure modes and effects analysis, and to how they are coupled with engineering and test analysis for a 'synergistic picture' of the system. Some preliminary safety analysis results, showing the relationship between hazard identification, control or abatement, and finally control verification, are presented as examples of this safety process.

Research on the spatial analysis method of seismic hazard for island

NASA Astrophysics Data System (ADS)

Jia, Jing; Jiang, Jitong; Zheng, Qiuhong; Gao, Huiying

2017-05-01

Seismic hazard analysis(SHA) is a key component of earthquake disaster prevention field for island engineering, whose result could provide parameters for seismic design microscopically and also is the requisite work for the island conservation planning’s earthquake and comprehensive disaster prevention planning macroscopically, in the exploitation and construction process of both inhabited and uninhabited islands. The existing seismic hazard analysis methods are compared in their application, and their application and limitation for island is analysed. Then a specialized spatial analysis method of seismic hazard for island (SAMSHI) is given to support the further related work of earthquake disaster prevention planning, based on spatial analysis tools in GIS and fuzzy comprehensive evaluation model. The basic spatial database of SAMSHI includes faults data, historical earthquake record data, geological data and Bouguer gravity anomalies data, which are the data sources for the 11 indices of the fuzzy comprehensive evaluation model, and these indices are calculated by the spatial analysis model constructed in ArcGIS’s Model Builder platform.

Resilience to Interacting multi-natural hazards

NASA Astrophysics Data System (ADS)

Zhuo, Lu; Han, Dawei

2016-04-01

Conventional analyses of hazard assessment tend to focus on individual hazards in isolation. However, many parts of the world are usually affected by multiple natural hazards with the potential for interacting relationships. The understanding of such interactions, their impacts and the related uncertainties, are an important and topical area of research. Interacting multi-hazards may appear in different forms, including 1) CASCADING HAZARDS (a primary hazard triggering one or more secondary hazards such as an earthquake triggering landslides which may block river channels with dammed lakes and ensued floods), 2) CONCURRING HAZARDS (two or more primary hazards coinciding to trigger or exacerbate secondary hazards such as an earthquake and a rainfall event simultaneously creating landslides), and 3) ALTERING HAZARDS (a primary hazard increasing the probability of a secondary hazard occurring such as major earthquakes disturbing soil/rock materials by violent ground shaking which alter the regional patterns of landslides and debris flows in the subsequent years to come). All three types of interacting multi-hazards may occur in natural hazard prone regions, so it is important that research on hazard resilience should cover all of them. In the past decades, great progresses have been made in tackling disaster risk around the world. However, there are still many challenging issues to be solved, and the disasters over recent years have clearly demonstrated the inadequate resilience in our highly interconnected and interdependent systems. We have identified the following weaknesses and knowledge gaps in the current disaster risk management: 1) although our understanding in individual hazards has been greatly improved, there is a lack of sound knowledge about mechanisms and processes of interacting multi-hazards. Therefore, the resultant multi-hazard risk is often significantly underestimated with severe consequences. It is also poorly understood about the spatial and temporal changes in hazards and vulnerability during successive hazards; 2) hazard monitoring, forecasting and early warning systems have not fully utilised the domain knowledge of physical processes and the statistical information of the observations; 3) uncertainties have not been well recognised in the current risk management practice, and ignorance of uncertainties could lead to major threat to the society and poor consideration with inefficient or unsustainable preferences of options; 4) there is increasing recognition that the so called 'natural' disasters are not just the consequences of nature-related processes alone, but are attributable to various social, economic, historical, political and cultural causes. However, despite this recognition, the current hazard and risk assessments are fragmented with a weakness in holistically combining quantitative and qualitative information from a variety of sources; 5) successful disaster risk management must be relevant and useful to all stakeholders involved. Efforts should enable the essential common purpose, collective learning and entrepreneurial collaborations that underpin effective and efficient resilience. Therefore, there is an urgent need for the systems thinking framework and decision support system tools in adequate scenario assessment and resilience development from a harmonised and transdisciplinary perspective. It is important that the aforementioned issues should be tackled with a joint effort from a multidisciplinary team in social science, natural science, engineering and systems.

Large Scale Flood Risk Analysis using a New Hyper-resolution Population Dataset

NASA Astrophysics Data System (ADS)

Smith, A.; Neal, J. C.; Bates, P. D.; Quinn, N.; Wing, O.

2017-12-01

Here we present the first national scale flood risk analyses, using high resolution Facebook Connectivity Lab population data and data from a hyper resolution flood hazard model. In recent years the field of large scale hydraulic modelling has been transformed by new remotely sensed datasets, improved process representation, highly efficient flow algorithms and increases in computational power. These developments have allowed flood risk analysis to be undertaken in previously unmodeled territories and from continental to global scales. Flood risk analyses are typically conducted via the integration of modelled water depths with an exposure dataset. Over large scales and in data poor areas, these exposure data typically take the form of a gridded population dataset, estimating population density using remotely sensed data and/or locally available census data. The local nature of flooding dictates that for robust flood risk analysis to be undertaken both hazard and exposure data should sufficiently resolve local scale features. Global flood frameworks are enabling flood hazard data to produced at 90m resolution, resulting in a mis-match with available population datasets which are typically more coarsely resolved. Moreover, these exposure data are typically focused on urban areas and struggle to represent rural populations. In this study we integrate a new population dataset with a global flood hazard model. The population dataset was produced by the Connectivity Lab at Facebook, providing gridded population data at 5m resolution, representing a resolution increase over previous countrywide data sets of multiple orders of magnitude. Flood risk analysis undertaken over a number of developing countries are presented, along with a comparison of flood risk analyses undertaken using pre-existing population datasets.

Historical analysis of US pipeline accidents triggered by natural hazards

NASA Astrophysics Data System (ADS)

Girgin, Serkan; Krausmann, Elisabeth

2015-04-01

Natural hazards, such as earthquakes, floods, landslides, or lightning, can initiate accidents in oil and gas pipelines with potentially major consequences on the population or the environment due to toxic releases, fires and explosions. Accidents of this type are also referred to as Natech events. Many major accidents highlight the risk associated with natural-hazard impact on pipelines transporting dangerous substances. For instance, in the USA in 1994, flooding of the San Jacinto River caused the rupture of 8 and the undermining of 29 pipelines by the floodwaters. About 5.5 million litres of petroleum and related products were spilled into the river and ignited. As a results, 547 people were injured and significant environmental damage occurred. Post-incident analysis is a valuable tool for better understanding the causes, dynamics and impacts of pipeline Natech accidents in support of future accident prevention and mitigation. Therefore, data on onshore hazardous-liquid pipeline accidents collected by the US Pipeline and Hazardous Materials Safety Administration (PHMSA) was analysed. For this purpose, a database-driven incident data analysis system was developed to aid the rapid review and categorization of PHMSA incident reports. Using an automated data-mining process followed by a peer review of the incident records and supported by natural hazard databases and external information sources, the pipeline Natechs were identified. As a by-product of the data-collection process, the database now includes over 800,000 incidents from all causes in industrial and transportation activities, which are automatically classified in the same way as the PHMSA record. This presentation describes the data collection and reviewing steps conducted during the study, provides information on the developed database and data analysis tools, and reports the findings of a statistical analysis of the identified hazardous liquid pipeline incidents in terms of accident dynamics and consequences.

Automating the evaluation of flood damages: methodology and potential gains

NASA Astrophysics Data System (ADS)

Eleutério, Julian; Martinez, Edgar Daniel

2010-05-01

The evaluation of flood damage potential consists of three main steps: assessing and processing data, combining data and calculating potential damages. The first step consists of modelling hazard and assessing vulnerability. In general, this step of the evaluation demands more time and investments than the others. The second step of the evaluation consists of combining spatial data on hazard with spatial data on vulnerability. Geographic Information System (GIS) is a fundamental tool in the realization of this step. GIS software allows the simultaneous analysis of spatial and matrix data. The third step of the evaluation consists of calculating potential damages by means of damage-functions or contingent analysis. All steps demand time and expertise. However, the last two steps must be realized several times when comparing different management scenarios. In addition, uncertainty analysis and sensitivity test are made during the second and third steps of the evaluation. The feasibility of these steps could be relevant in the choice of the extent of the evaluation. Low feasibility could lead to choosing not to evaluate uncertainty or to limit the number of scenario comparisons. Several computer models have been developed over time in order to evaluate the flood risk. GIS software is largely used to realise flood risk analysis. The software is used to combine and process different types of data, and to visualise the risk and the evaluation results. The main advantages of using a GIS in these analyses are: the possibility of "easily" realising the analyses several times, in order to compare different scenarios and study uncertainty; the generation of datasets which could be used any time in future to support territorial decision making; the possibility of adding information over time to update the dataset and make other analyses. However, these analyses require personnel specialisation and time. The use of GIS software to evaluate the flood risk requires personnel with a double professional specialisation. The professional should be proficient in GIS software and in flood damage analysis (which is already a multidisciplinary field). Great effort is necessary in order to correctly evaluate flood damages, and the updating and the improvement of the evaluation over time become a difficult task. The automation of this process should bring great advance in flood management studies over time, especially for public utilities. This study has two specific objectives: (1) show the entire process of automation of the second and third steps of flood damage evaluations; and (2) analyse the induced potential gains in terms of time and expertise needed in the analysis. A programming language is used within GIS software in order to automate hazard and vulnerability data combination and potential damages calculation. We discuss the overall process of flood damage evaluation. The main result of this study is a computational tool which allows significant operational gains on flood loss analyses. We quantify these gains by means of a hypothetical example. The tool significantly reduces the time of analysis and the needs for expertise. An indirect gain is that sensitivity and cost-benefit analyses can be more easily realized.

NASA Hazard Analysis Process

NASA Technical Reports Server (NTRS)

Deckert, George

2010-01-01

This viewgraph presentation reviews The NASA Hazard Analysis process. The contents include: 1) Significant Incidents and Close Calls in Human Spaceflight; 2) Subsystem Safety Engineering Through the Project Life Cycle; 3) The Risk Informed Design Process; 4) Types of NASA Hazard Analysis; 5) Preliminary Hazard Analysis (PHA); 6) Hazard Analysis Process; 7) Identify Hazardous Conditions; 8) Consider All Interfaces; 9) Work a Preliminary Hazard List; 10) NASA Generic Hazards List; and 11) Final Thoughts

Effects of illness and disability on job separation.

PubMed

Magee, William

2004-03-01

Effects of illness and disability on job separation result from both voluntary and involuntary processes. Voluntary processes range from the reasoned actions of workers who weigh illness and disability in their decision-making, to reactive stress-avoidance responses. Involuntary processes include employer discrimination against ill or disabled workers. Analyses of the effects of illness and disability that differentiate reasons for job separation can illuminate the processes involved. This paper reports on an evaluation of effects of illness and disability on job separation predicted by theories of reasoned action, stress, and employer discrimination against ill and disabled workers. Effects of four illness/disability conditions on the rate of job separation for 12 reasons are estimated using data from a longitudinal study of a representative sample of the Canadian population-the Survey of Labour and Income Dynamics (SLID). Two of the four effects that are statistically significant (under conservative Bayesian criteria for statistical significance) are consistent with the idea that workers weigh illness and disability as costs, and calculate the costs and benefits of continuing to work with an illness or disability: (1) disabling illness increases the hazard of leaving a job in order to engage in caregiving, and (2) work-related disability increases the hazard of leaving a job due to poor pay. The other two significant effects indicate that: (3) disabling illness decreases the hazard of layoff, and (4) non-work disability increases the hazard of leaving one job to take a different job. This last effect is consistent with a stress-interruption process. Other effects are statistically significant under conventional criteria for statistical significance, and most of these effects are also consistent with cost-benefit and stress theories. Some effects of illness and disability are sex and age-specific, and reasons for the specificity of these effects are discussed.

Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry

PubMed Central

Syron, Laura N.; Lucas, Devin L.; Bovbjerg, Viktor E.; Bethel, Jeffrey W.; Kincl, Laurel D.

2016-01-01

Background The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers’ lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS) has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. Objectives This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Design Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. Results We successfully utilized the WPCS to code non-fatal injury cases (n = 136). The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. Conclusions The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to determine risk estimates. Efforts to improve non-fatal injury reporting, especially on smaller commercial fishing vessels, should be undertaken. PMID:26782030

Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry.

PubMed

Syron, Laura N; Lucas, Devin L; Bovbjerg, Viktor E; Bethel, Jeffrey W; Kincl, Laurel D

2016-01-01

Background The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers' lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS) has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. Objectives This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Design Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. Results We successfully utilized the WPCS to code non-fatal injury cases (n = 136). The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. Conclusions The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to determine risk estimates. Efforts to improve non-fatal injury reporting, especially on smaller commercial fishing vessels, should be undertaken.

Utility of a Work Process Classification System for characterizing non-fatal injuries in the Alaskan commercial fishing industry.

PubMed

Syron, Laura N; Lucas, Devin L; Bovbjerg, Viktor E; Bethel, Jeffrey W; Kincl, Laurel D

2016-01-01

The US commercial fishing industry is hazardous, as measured by mortality data. However, research on non-fatal injuries is limited. Non-fatal injuries constitute the majority of occupational injuries and can result in workers' lowered productivity and wages, lost quality of life, and disability. In the United States, a Work Process Classification System (WPCS) has previously been applied in Alaskan freezer-trawl and freezer-longline fleets to identify causes of injuries and specific hazards, but not to other fishing fleets. This descriptive epidemiologic study aimed to explore the application and modification of the WPCS in multiple Alaskan fleets, characterize non-fatal occupational injuries in these fleets, and identify work processes that could be targeted for further investigation and future injury prevention efforts. Traumatic, non-fatal injuries on-board Alaskan commercial fishing vessels were identified through United States Coast Guard investigative reports. Characteristics of injuries, as well as worker characteristics, were analysed. Injuries were coded using the WPCS. We successfully utilized the WPCS to code non-fatal injury cases (n = 136). The most frequent main work processes associated with non-fatal injuries included: on-board trawlers, handling frozen fish and processing the catch; on-board vessels using pot/trap gear, handling the gear and shooting/setting the gear; on-board longliners, traffic on board and hauling the gear; and on-board processor vessels, processing the catch, other work with the catch, and handling frozen fish. The study confirmed that a WPCS can be applied to multiple Alaskan fleets to identify hazardous tasks. Hazards were unique for each vessel gear type. Future injury prevention efforts should target work processes associated with the most frequent and most severe injuries. Future studies should establish time estimates for work processes in order to determine risk estimates. Efforts to improve non-fatal injury reporting, especially on smaller commercial fishing vessels, should be undertaken.

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety workplace hazards through appropriate workplace monitoring; (2) Document assessment for chemical, physical... hazards; (6) Perform routine job activity-level hazard analyses; (7) Review site safety and health...

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety workplace hazards through appropriate workplace monitoring; (2) Document assessment for chemical, physical... hazards; (6) Perform routine job activity-level hazard analyses; (7) Review site safety and health...

RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

KOZLOWSKI, S.D.

2007-05-30

This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

Building Better Volcanic Hazard Maps Through Scientific and Stakeholder Collaboration

NASA Astrophysics Data System (ADS)

Thompson, M. A.; Lindsay, J. M.; Calder, E.

2015-12-01

All across the world information about natural hazards such as volcanic eruptions, earthquakes and tsunami is shared and communicated using maps that show which locations are potentially exposed to hazards of varying intensities. Unlike earthquakes and tsunami, which typically produce one dominant hazardous phenomenon (ground shaking and inundation, respectively) volcanic eruptions can produce a wide variety of phenomena that range from near-vent (e.g. pyroclastic flows, ground shaking) to distal (e.g. volcanic ash, inundation via tsunami), and that vary in intensity depending on the type and location of the volcano. This complexity poses challenges in depicting volcanic hazard on a map, and to date there has been no consistent approach, with a wide range of hazard maps produced and little evaluation of their relative efficacy. Moreover, in traditional hazard mapping practice, scientists analyse data about a hazard, and then display the results on a map that is then presented to stakeholders. This one-way, top-down approach to hazard communication does not necessarily translate into effective hazard education, or, as tragically demonstrated by Nevado del Ruiz, Columbia in 1985, its use in risk mitigation by civil authorities. Furthermore, messages taken away from a hazard map can be strongly influenced by its visual design. Thus, hazard maps are more likely to be useful, usable and used if relevant stakeholders are engaged during the hazard map process to ensure a) the map is designed in a relevant way and b) the map takes into account how users interpret and read different map features and designs. The IAVCEI Commission on Volcanic Hazards and Risk has recently launched a Hazard Mapping Working Group to collate some of these experiences in graphically depicting volcanic hazard from around the world, including Latin America and the Caribbean, with the aim of preparing some Considerations for Producing Volcanic Hazard Maps that may help map makers in the future.

Assessing Natural Hazard Vulnerability Through Marmara Region Using GIS

NASA Astrophysics Data System (ADS)

Sabuncu, A.; Garagon Dogru, A.; Ozener, H.

2013-12-01

Natural hazards are natural phenomenon occured in the Earth's system that include geological and meteorological events such as earthquakes, floods, landslides, droughts, fires and tsunamis. The metropolitan cities are vulnerable to natural hazards due to their population densities, industrial facilities and proporties. The urban layout of the megacities are complex since industrial facilities are interference with residential area. The Marmara region is placed in North-western Turkey suffered from natural hazards (earthquakes, floods etc.) for years. After 1999 Kocaeli and Duzce earthquakes and 2009 Istanbul flash floods, dramatic number of casualities and economic losses were reported by the authorities. Geographic information systems (GIS) have substantial capacity in order to develop natural disaster management. As these systems provide more efficient and reliable analysis and evaluation of the data in the management, and also convenient and better solutions for the decision making before during and after the natural hazards. The Earth science data and socio-economic data can be integrated into a GIS as different layers. Additionally, satellite data are used to understand the changes pre and post the natural hazards. GIS is a powerful software for the combination of different type of digital data. A natural hazard database for the Marmara region provides all different types of digital data to the users. All proper data collection processing and analysing are critical to evaluate and identify hazards. The natural hazard database allows users to monitor, analyze and query past and recent disasters in the Marmara Region. The long term aim of this study is to develop geodatabase and identify the natural hazard vulnerabilities of the metropolitan cities.

Combined fluvial and pluvial urban flood hazard analysis: concept development and application to Can Tho city, Mekong Delta, Vietnam

NASA Astrophysics Data System (ADS)

Apel, Heiko; Martínez Trepat, Oriol; Nghia Hung, Nguyen; Thi Chinh, Do; Merz, Bruno; Viet Dung, Nguyen

2016-04-01

Many urban areas experience both fluvial and pluvial floods, because locations next to rivers are preferred settlement areas and the predominantly sealed urban surface prevents infiltration and facilitates surface inundation. The latter problem is enhanced in cities with insufficient or non-existent sewer systems. While there are a number of approaches to analyse either a fluvial or pluvial flood hazard, studies of a combined fluvial and pluvial flood hazard are hardly available. Thus this study aims to analyse a fluvial and a pluvial flood hazard individually, but also to develop a method for the analysis of a combined pluvial and fluvial flood hazard. This combined fluvial-pluvial flood hazard analysis is performed taking Can Tho city, the largest city in the Vietnamese part of the Mekong Delta, as an example. In this tropical environment the annual monsoon triggered floods of the Mekong River, which can coincide with heavy local convective precipitation events, causing both fluvial and pluvial flooding at the same time. The fluvial flood hazard was estimated with a copula-based bivariate extreme value statistic for the gauge Kratie at the upper boundary of the Mekong Delta and a large-scale hydrodynamic model of the Mekong Delta. This provided the boundaries for 2-dimensional hydrodynamic inundation simulation for Can Tho city. The pluvial hazard was estimated by a peak-over-threshold frequency estimation based on local rain gauge data and a stochastic rainstorm generator. Inundation for all flood scenarios was simulated by a 2-dimensional hydrodynamic model implemented on a Graphics Processing Unit (GPU) for time-efficient flood propagation modelling. The combined fluvial-pluvial flood scenarios were derived by adding rainstorms to the fluvial flood events during the highest fluvial water levels. The probabilities of occurrence of the combined events were determined assuming independence of the two flood types and taking the seasonality and probability of coincidence into account. All hazards - fluvial, pluvial and combined - were accompanied by an uncertainty estimation taking into account the natural variability of the flood events. This resulted in probabilistic flood hazard maps showing the maximum inundation depths for a selected set of probabilities of occurrence, with maps showing the expectation (median) and the uncertainty by percentile maps. The results are critically discussed and their usage in flood risk management are outlined.

Small Business Innovations

NASA Technical Reports Server (NTRS)

1996-01-01

Under a Small Business Innovation Research (SBIR) contract to Kennedy Space Center, EIC Laboratories invented a Raman Spectrograph with fiber optic sampling for space applications such as sensing hazardous fuel vapors and making on-board rapid analyses of chemicals and minerals. Raman spectroscopy is a laser-based measurement technique that provides through a unique vibrational spectrum a molecular 'fingerprint,' and can function in aqueous environments. EIC combined optical fiber technology with Raman methods to develop sensors that can be operated at a distance from the spectrographic analysis instruments and the laser excitation source. EIC refined and commercialized the technology to create the Fiber Optic Raman Spectrograph and the RamanProbe. Commercial applications range from process control to monitoring hazardous materials.

A generic multi-hazard and multi-risk framework and its application illustrated in a virtual city

NASA Astrophysics Data System (ADS)

Mignan, Arnaud; Euchner, Fabian; Wiemer, Stefan

2013-04-01

We present a generic framework to implement hazard correlations in multi-risk assessment strategies. We consider hazard interactions (process I), time-dependent vulnerability (process II) and time-dependent exposure (process III). Our approach is based on the Monte Carlo method to simulate a complex system, which is defined from assets exposed to a hazardous region. We generate 1-year time series, sampling from a stochastic set of events. Each time series corresponds to one risk scenario and the analysis of multiple time series allows for the probabilistic assessment of losses and for the recognition of more or less probable risk paths. Each sampled event is associated to a time of occurrence, a damage footprint and a loss footprint. The occurrence of an event depends on its rate, which is conditional on the occurrence of past events (process I, concept of correlation matrix). Damage depends on the hazard intensity and on the vulnerability of the asset, which is conditional on previous damage on that asset (process II). Losses are the product of damage and exposure value, this value being the original exposure minus previous losses (process III, no reconstruction considered). The Monte Carlo method allows for a straightforward implementation of uncertainties and for implementation of numerous interactions, which is otherwise challenging in an analytical multi-risk approach. We apply our framework to a synthetic data set, defined by a virtual city within a virtual region. This approach gives the opportunity to perform multi-risk analyses in a controlled environment while not requiring real data, which may be difficultly accessible or simply unavailable to the public. Based on the heuristic approach, we define a 100 by 100 km region where earthquakes, volcanic eruptions, fluvial floods, hurricanes and coastal floods can occur. All hazards are harmonized to a common format. We define a 20 by 20 km city, composed of 50,000 identical buildings with a fixed economic value. Vulnerability curves are defined in terms of mean damage ratio as a function of hazard intensity. All data are based on simple equations found in the literature and on other simplifications. We show the impact of earthquake-earthquake interaction and hurricane-storm surge coupling, as well as of time-dependent vulnerability and exposure, on aggregated loss curves. One main result is the emergence of low probability-high consequences (extreme) events when correlations are implemented. While the concept of virtual city can suggest the theoretical benefits of multi-risk assessment for decision support, identifying their real-world practicality will require the study of real test sites.

Treatment Study Plan for Nitrate Salt Waste Remediation Revision 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juarez, Catherine L.; Funk, David John; Vigil-Holterman, Luciana R.

2016-03-07

The two stabilization treatment methods that are to be examined for their effectiveness in the treatment of both the unremediated and remediated nitrate salt wastes include (1) the addition of zeolite and (2) cementation. Zeolite addition is proposed based on the results of several studies and analyses that specifically examined the effectiveness of this process for deactivating nitrate salts. Cementation is also being assessed because of its prevalence as an immobilization method used for similar wastes at numerous facilities around the DOE complex, including at Los Alamos. The results of this Treatment Study Plan will be used to provide themore » basis for a Resource Conservation and Recovery Act (RCRA) permit modification request of the LANL Hazardous Waste Facility Permit for approval by the New Mexico Environment Department-Hazardous Waste Bureau (NMED-HWB) of the proposed treatment process and the associated facilities.« less

Structural verification for GAS experiments

NASA Technical Reports Server (NTRS)

Peden, Mark Daniel

1992-01-01

The purpose of this paper is to assist the Get Away Special (GAS) experimenter in conducting a thorough structural verification of its experiment structural configuration, thus expediting the structural review/approval process and the safety process in general. Material selection for structural subsystems will be covered with an emphasis on fasteners (GSFC fastener integrity requirements) and primary support structures (Stress Corrosion Cracking requirements and National Space Transportation System (NSTS) requirements). Different approaches to structural verifications (tests and analyses) will be outlined especially those stemming from lessons learned on load and fundamental frequency verification. In addition, fracture control will be covered for those payloads that utilize a door assembly or modify the containment provided by the standard GAS Experiment Mounting Plate (EMP). Structural hazard assessment and the preparation of structural hazard reports will be reviewed to form a summation of structural safety issues for inclusion in the safety data package.

75 FR 16202 - Office of New Reactors; Interim Staff Guidance on Ensuring Hazard-Consistent Seismic Input for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

... Staff Guidance on Ensuring Hazard-Consistent Seismic Input for Site Response and Soil Structure...-Consistent Seismic Input for Site Response and Soil Structure Interaction Analyses,'' (Agencywide Documents... Soil Structure Interaction Analyses,'' (ADAMS Accession No. ML092230455) to solicit public and industry...

Which came first, people or pollution? A review of theory and evidence from longitudinal environmental justice studies

NASA Astrophysics Data System (ADS)

Mohai, Paul; Saha, Robin

2015-12-01

A considerable number of quantitative analyses have been conducted in the past several decades that demonstrate the existence of racial and socioeconomic disparities in the distribution of a wide variety of environmental hazards. The vast majority of these have been cross-sectional, snapshot studies employing data on hazardous facilities and population characteristics at only one point in time. Although some limited hypotheses can be tested with cross-sectional data, fully understanding how present-day disparities come about requires longitudinal analyses that examine the demographic characteristics of sites at the time of facility siting and track demographic changes after siting. Relatively few such studies exist and those that do exist have often led to confusing and contradictory findings. In this paper we review the theoretical arguments, methods, findings, and conclusions drawn from existing longitudinal environmental justice studies. Our goal is to make sense of this literature and to identify the direction future research should take in order to resolve confusion and arrive at a clearer understanding of the processes and contributory factors by which present-day racial and socioeconomic disparities in the distribution of environmental hazards have come about. Such understandings also serve as an important step in identifying appropriate and effective societal responses to ameliorate environmental disparities.

Probabilistic wind/tornado/missile analyses for hazard and fragility evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Y.J.; Reich, M.

Detailed analysis procedures and examples are presented for the probabilistic evaluation of hazard and fragility against high wind, tornado, and tornado-generated missiles. In the tornado hazard analysis, existing risk models are modified to incorporate various uncertainties including modeling errors. A significant feature of this paper is the detailed description of the Monte-Carlo simulation analyses of tornado-generated missiles. A simulation procedure, which includes the wind field modeling, missile injection, solution of flight equations, and missile impact analysis, is described with application examples.

Vulnerability of port and harbor communities to earthquake and tsunami hazards: The use of GIS in community hazard planning

USGS Publications Warehouse

Wood, Nathan J.; Good, James W.

2004-01-01

AbstractEarthquakes and tsunamis pose significant threats to Pacific Northwest coastal port and harbor communities. Developing holistic mitigation and preparedness strategies to reduce the potential for loss of life and property damage requires community-wide vulnerability assessments that transcend traditional site-specific analyses. The ability of a geographic information system (GIS) to integrate natural, socioeconomic, and hazards information makes it an ideal assessment tool to support community hazard planning efforts. This article summarizes how GIS was used to assess the vulnerability of an Oregon port and harbor community to earthquake and tsunami hazards, as part of a larger risk-reduction planning initiative. The primary purposes of the GIS were to highlight community vulnerability issues and to identify areas that both are susceptible to hazards and contain valued port and harbor community resources. Results of the GIS analyses can help decision makers with limited mitigation resources set priorities for increasing community resiliency to natural hazards.

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in priormore » hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A.« less

Translating Volcano Hazards Research in the Cascades Into Community Preparedness

NASA Astrophysics Data System (ADS)

Ewert, J. W.; Driedger, C. L.

2015-12-01

Research by the science community into volcanic histories and physical processes at Cascade volcanoes in the states of Washington, Oregon, and California has been ongoing for over a century. Eruptions in the 20th century at Lassen Peak and Mount St. Helen demonstrated the active nature of Cascade volcanoes; the 1980 eruption of Mount St. Helens was a defining moment in modern volcanology. The first modern volcano hazards assessments were produced by the USGS for some Cascade volcanoes in the 1960s. A rich scientific literature exists, much of which addresses hazards at these active volcanoes. That said community awareness, planning, and preparation for eruptions generally do not occur as a result of a hazard analyses published in scientific papers, but by direct communication with scientists. Relative to other natural hazards, volcanic eruptions (or large earthquakes, or tsunami) are outside common experience, and the public and many public officials are often surprised to learn of the impacts volcanic eruptions could have on their communities. In the 1980s, the USGS recognized that effective hazard communication and preparedness is a multi-faceted, long-term undertaking and began working with federal, state, and local stakeholders to build awareness and foster community action about volcano hazards. Activities included forming volcano-specific workgroups to develop coordination plans for volcano emergencies; a concerted public outreach campaign; curriculum development and teacher training; technical training for emergency managers and first responders; and development of hazard information that is accessible to non-specialists. Outcomes include broader ownership of volcano hazards as evidenced by bi-national exchanges of emergency managers, community planners, and first responders; development by stakeholders of websites focused on volcano hazards mitigation; and execution of table-top and functional exercises, including evacuation drills by local communities.

An Approach for Rapid Assessment of Seismic Hazards in Turkey by Continuous GPS Data

PubMed Central

Ozener, Haluk; Dogru, Asli; Unlutepe, Ahmet

2009-01-01

The Earth is being monitored every day by all kinds of sensors. This leads an overflow of data in all branches of science nowadays, especially in Earth Sciences. Data storage and data processing are the problems to be solved by current technologies, as well as by those accessing and analyzing these large data sources. Once solutions have been created for collecting, storing and accessing data, then the challenge becomes how to effectively share data, applications and processing resources across many locations. The Global Positioning System (GPS) sensors are being used as geodetic instruments to precisely detect crustal motion in the Earth's surface. Rapid access to data provided by GPS sensors is becoming increasingly important for deformation monitoring and rapid hazard assessments. Today, reliable and fast collection and distribution of data is a challenge and advances in Internet technologies have made it easier to provide the needed data. This study describes a system which will be able to generate strain maps using data from continuous GPS stations for seismic hazard analysis. Strain rates are a key factor in seismic hazard analyses. Turkey is a country prone to earthquakes with a long history of seismic hazards and disasters. This situation has resulted in the studies by Earth scientists that focus on Turkey in order to improve their understanding of the Earth's crust structure and seismic hazards. Nevertheless, the construction of models, data access and analysis are often not fast as expected, but the combination of Internet technologies with continuous GPS sensors can be a solution to overcome this problem. This system would have the potential to answer many important questions to assess seismic hazards such as how much stretching, squashing and shearing is taking place in different parts of Turkey, and how do velocities change from place to place? Seismic hazard estimation is the most effective way to reduce earthquake losses. It is clear that reliability of data and on-line services will support the preparation of strategies for disaster management and planning to cope with hazards. PMID:22389619

A Case Study of Measuring Process Risk for Early Insights into Software Safety

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor; Zelkowitz, Marvin V.; Fisher, Karen L.

2011-01-01

In this case study, we examine software safety risk in three flight hardware systems in NASA's Constellation spaceflight program. We applied our Technical and Process Risk Measurement (TPRM) methodology to the Constellation hazard analysis process to quantify the technical and process risks involving software safety in the early design phase of these projects. We analyzed 154 hazard reports and collected metrics to measure the prevalence of software in hazards and the specificity of descriptions of software causes of hazardous conditions. We found that 49-70% of 154 hazardous conditions could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. The application of the TPRM methodology identified process risks in the application of the hazard analysis process itself that may lead to software safety risk.

Toxics Release Inventory Chemical Hazard Information Profiles (TRI-CHIP) Dataset

EPA Pesticide Factsheets

The Toxics Release Inventory (TRI) Chemical Hazard Information Profiles (TRI-CHIP) dataset contains hazard information about the chemicals reported in TRI. Users can use this XML-format dataset to create their own databases and hazard analyses of TRI chemicals. The hazard information is compiled from a series of authoritative sources including the Integrated Risk Information System (IRIS). The dataset is provided as a downloadable .zip file that when extracted provides XML files and schemas for the hazard information tables.

Behaviour and fluxes of natural radionuclides in the production process of a phosphoric acid plant.

PubMed

Bolívar, J P; Martín, J E; García-Tenorio, R; Pérez-Moreno, J P; Mas, J L

2009-02-01

In recent years there has been an increasing awareness of the occupational and public hazards of the radiological impact of non-nuclear industries which process materials containing naturally occurring radionuclides. These include the industries devoted to the production of phosphoric acid by treating sedimentary phosphate rocks enriched in radionuclides from the uranium series. With the aim of evaluating the radiological impact of a phosphoric acid factory located in the south-western Spain, the distribution and levels of radionuclides in the materials involved in its production process have been analysed. In this way, it is possible to asses the flows of radionuclides at each step and to locate those points where a possible radionuclide accumulation could be produced. A set of samples collected along the whole production process were analysed to determine their radionuclide content by both alpha-particle and gamma spectrometry techniques. The radionuclide fractionation steps and enrichment sources have been located, allowing the establishment of their mass (activity) balances per year.

49 CFR 659.31 - Hazard management process.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Hazard management process. 659.31 Section 659.31... Agency § 659.31 Hazard management process. (a) The oversight agency must require the rail transit agency..., operational changes, or other changes within the rail transit environment. (b) The hazard management process...

49 CFR 659.31 - Hazard management process.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Hazard management process. 659.31 Section 659.31... Agency § 659.31 Hazard management process. (a) The oversight agency must require the rail transit agency..., operational changes, or other changes within the rail transit environment. (b) The hazard management process...

49 CFR 659.31 - Hazard management process.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Hazard management process. 659.31 Section 659.31... Agency § 659.31 Hazard management process. (a) The oversight agency must require the rail transit agency..., operational changes, or other changes within the rail transit environment. (b) The hazard management process...

Assessing the seismic risk potential of South America

USGS Publications Warehouse

Jaiswal, Kishor; Petersen, Mark D.; Harmsen, Stephen; Smoczyk, Gregory M.

2016-01-01

We present here a simplified approach to quantifying regional seismic risk. The seismic risk for a given region can be inferred in terms of average annual loss (AAL) that represents long-term value of earthquake losses in any one year caused from a long-term seismic hazard. The AAL are commonly measured in the form of earthquake shaking-induced deaths, direct economic impacts or indirect losses caused due to loss of functionality. In the context of South American subcontinent, the analysis makes use of readily available public data on seismicity, population exposure, and the hazard and vulnerability models for the region. The seismic hazard model was derived using available seismic catalogs, fault databases, and the hazard methodologies that are analogous to the U.S. Geological Survey’s national seismic hazard mapping process. The Prompt Assessment of Global Earthquakes for Response (PAGER) system’s direct empirical vulnerability functions in terms of fatality and economic impact were used for performing exposure and risk analyses. The broad findings presented and the risk maps produced herein are preliminary, yet they do offer important insights into the underlying zones of high and low seismic risks in the South American subcontinent. A more detailed analysis of risk may be warranted by engaging local experts, especially in some of the high risk zones identified through the present investigation.

Study on the Distribution of Geological Hazards Based on Fractal Characteristics - a Case Study of Dachuan District

NASA Astrophysics Data System (ADS)

Wang, X.; Liu, H.; Yao, K.; Wei, Y.

2018-04-01

It is a complicated process to analyze the cause of geological hazard. Through the analysis function of GIS software, 250 landslides were randomly selected from 395 landslide hazards in the study area, superimposed with the types of landforms, annual rainfall and vegetation coverage respectively. It used box dimension method of fractal dimension theory to study the fractal characteristics of spatial distribution of landslide disasters in Dachuan district, and analyse the statistical results. Research findings showed that the The fractal dimension of the landslides in the Dachuan area is 0.9114, the correlation coefficient is 0.9627, and it has high autocorrelation. Zoning statistics according to various natural factors, the fractal dimension between landslide hazard points and deep hill, middle hill area is strong as well as the area whose average annual rainfall is 1050 mm-1250 mm and vegetation coverage is 30 %-60 %. Superposition of the potential hazard distribution map of single influence factors to get the potential hazard zoning of landslides in the area. Verifying the potential hazard zoning map of the potential landslides with 145 remaining disaster points, among them, there are 74 landslide hazard points in high risk area, accounting for 51.03 % of the total. There are 59 landslides in the middle risk area, accounting for 40.69 % of the total, and 12 in the low risk area, accounting for 8.28 % of the total. The matching degree of the verifying result and the potential hazard zoning is high. Therefore, the fractal dimension value divided the degree of geological disaster susceptibility can be described the influence degree of each influence factor to geological disaster point more intuitively, it also can divide potential disaster risk areas and provide visual data support for effective management of geological disasters.

An approach to trial design and analysis in the era of non-proportional hazards of the treatment effect.

PubMed

Royston, Patrick; Parmar, Mahesh K B

2014-08-07

Most randomized controlled trials with a time-to-event outcome are designed and analysed under the proportional hazards assumption, with a target hazard ratio for the treatment effect in mind. However, the hazards may be non-proportional. We address how to design a trial under such conditions, and how to analyse the results. We propose to extend the usual approach, a logrank test, to also include the Grambsch-Therneau test of proportional hazards. We test the resulting composite null hypothesis using a joint test for the hazard ratio and for time-dependent behaviour of the hazard ratio. We compute the power and sample size for the logrank test under proportional hazards, and from that we compute the power of the joint test. For the estimation of relevant quantities from the trial data, various models could be used; we advocate adopting a pre-specified flexible parametric survival model that supports time-dependent behaviour of the hazard ratio. We present the mathematics for calculating the power and sample size for the joint test. We illustrate the methodology in real data from two randomized trials, one in ovarian cancer and the other in treating cellulitis. We show selected estimates and their uncertainty derived from the advocated flexible parametric model. We demonstrate in a small simulation study that when a treatment effect either increases or decreases over time, the joint test can outperform the logrank test in the presence of both patterns of non-proportional hazards. Those designing and analysing trials in the era of non-proportional hazards need to acknowledge that a more complex type of treatment effect is becoming more common. Our method for the design of the trial retains the tools familiar in the standard methodology based on the logrank test, and extends it to incorporate a joint test of the null hypothesis with power against non-proportional hazards. For the analysis of trial data, we propose the use of a pre-specified flexible parametric model that can represent a time-dependent hazard ratio if one is present.

Autonomous Precision Landing and Hazard Avoidance Technology (ALHAT) Project Status as of May 2010

NASA Technical Reports Server (NTRS)

Striepe, Scott A.; Epp, Chirold D.; Robertson, Edward A.

2010-01-01

This paper includes the current status of NASA s Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) Project. The ALHAT team has completed several flight tests and two major design analysis cycles. These tests and analyses examine terrain relative navigation sensors, hazard detection and avoidance sensors and algorithms, and hazard relative navigation algorithms, and the guidance and navigation system using these ALHAT functions. The next flight test is scheduled for July 2010. The paper contains results from completed flight tests and analysis cycles. ALHAT system status, upcoming tests and analyses is also addressed. The current ALHAT plans as of May 2010 are discussed. Application of the ALHAT system to landing on bodies other than the Moon is included

The effectiveness of coral reefs for coastal hazard risk reduction and adaptation

PubMed Central

Ferrario, Filippo; Beck, Michael W.; Storlazzi, Curt D.; Micheli, Fiorenza; Shepard, Christine C.; Airoldi, Laura

2014-01-01

The world’s coastal zones are experiencing rapid development and an increase in storms and flooding. These hazards put coastal communities at heightened risk, which may increase with habitat loss. Here we analyse globally the role and cost effectiveness of coral reefs in risk reduction. Meta-analyses reveal that coral reefs provide substantial protection against natural hazards by reducing wave energy by an average of 97%. Reef crests alone dissipate most of this energy (86%). There are 100 million or more people who may receive risk reduction benefits from reefs or bear hazard mitigation and adaptation costs if reefs are degraded. We show that coral reefs can provide comparable wave attenuation benefits to artificial defences such as breakwaters, and reef defences can be enhanced cost effectively. Reefs face growing threats yet there is opportunity to guide adaptation and hazard mitigation investments towards reef restoration to strengthen this first line of coastal defence. PMID:24825660

The effectiveness of coral reefs for coastal hazard risk reduction and adaptation.

PubMed

Ferrario, Filippo; Beck, Michael W; Storlazzi, Curt D; Micheli, Fiorenza; Shepard, Christine C; Airoldi, Laura

2014-05-13

The world's coastal zones are experiencing rapid development and an increase in storms and flooding. These hazards put coastal communities at heightened risk, which may increase with habitat loss. Here we analyse globally the role and cost effectiveness of coral reefs in risk reduction. Meta-analyses reveal that coral reefs provide substantial protection against natural hazards by reducing wave energy by an average of 97%. Reef crests alone dissipate most of this energy (86%). There are 100 million or more people who may receive risk reduction benefits from reefs or bear hazard mitigation and adaptation costs if reefs are degraded. We show that coral reefs can provide comparable wave attenuation benefits to artificial defences such as breakwaters, and reef defences can be enhanced cost effectively. Reefs face growing threats yet there is opportunity to guide adaptation and hazard mitigation investments towards reef restoration to strengthen this first line of coastal defence.

The effectiveness of coral reefs for coastal hazard risk reduction and adaptation

USGS Publications Warehouse

Ferrario, Filippo; Beck, Michael W.; Storlazzi, Curt D.; Micheli, Fiorenza; Shepard, Christine C.; Airoldi, Laura

2014-01-01

The world’s coastal zones are experiencing rapid development and an increase in storms and flooding. These hazards put coastal communities at heightened risk, which may increase with habitat loss. Here we analyse globally the role and cost effectiveness of coral reefs in risk reduction. Meta-analyses reveal that coral reefs provide substantial protection against natural hazards by reducing wave energy by an average of 97%. Reef crests alone dissipate most of this energy (86%). There are 100 million or more people who may receive risk reduction benefits from reefs or bear hazard mitigation and adaptation costs if reefs are degraded. We show that coral reefs can provide comparable wave attenuation benefits to artificial defences such as breakwaters, and reef defences can be enhanced cost effectively. Reefs face growing threats yet there is opportunity to guide adaptation and hazard mitigation investments towards reef restoration to strengthen this first line of coastal defence.

Applying the Land Use Portfolio Model with Hazus to analyse risk from natural hazard events

USGS Publications Warehouse

Dinitz, Laura B.; Taketa, Richard A.

2013-01-01

This paper describes and demonstrates the integration of two geospatial decision-support systems for natural-hazard risk assessment and management. Hazus is a risk-assessment tool developed by the Federal Emergency Management Agency to identify risks and estimate the severity of risk from natural hazards. The Land Use Portfolio Model (LUPM) is a risk-management tool developed by the U.S. Geological Survey to evaluate plans or actions intended to reduce risk from natural hazards. We analysed three mitigation policies for one earthquake scenario in the San Francisco Bay area to demonstrate the added value of using Hazus and the LUPM together. The demonstration showed that Hazus loss estimates can be input to the LUPM to obtain estimates of losses avoided through mitigation, rates of return on mitigation investment, and measures of uncertainty. Together, they offer a more comprehensive approach to help with decisions for reducing risk from natural hazards.

Earthquake Hazard Class Mapping by Parcel in Las Vegas Valley

NASA Astrophysics Data System (ADS)

Pancha, A.; Pullammanappallil, S.; Louie, J. N.; Hellmer, W. K.

2011-12-01

Clark County, Nevada completed the very first effort in the United States to map earthquake hazard class systematically through an entire urban area. The map is used in development and disaster response planning, in addition to its direct use for building code implementation and enforcement. The County contracted with the Nevada System of Higher Education to classify about 500 square miles including urban Las Vegas Valley, and exurban areas considered for future development. The Parcel Map includes over 10,000 surface-wave array measurements accomplished over three years using Optim's SeisOpt° ReMi measurement and processing techniques adapted for large scale data. These array measurements classify individual parcels on the NEHRP hazard scale. Parallel "blind" tests were conducted at 93 randomly selected sites. The rms difference between the Vs30 values yielded by the blind data and analyses and the Parcel Map analyses is 4.92%. Only six of the blind-test sites showed a difference with a magnitude greater than 10%. We describe a "C+" Class for sites with Class B average velocities but soft surface soil. The measured Parcel Map shows a clearly definable C+ to C boundary on the west side of the Valley. The C to D boundary is much more complex. Using the parcel map in computing shaking in the Valley for scenario earthquakes is crucial for obtaining realistic predictions of ground motions.

Pharmaceuticals and iodinated contrast media in a hospital wastewater: A case study to analyse their presence and characterise their environmental risk and hazard.

PubMed

Mendoza, A; Aceña, J; Pérez, S; López de Alda, M; Barceló, D; Gil, A; Valcárcel, Y

2015-07-01

This work analyses the presence of twenty-five pharmaceutical compounds belonging to seven different therapeutic groups and one iodinated contrast media (ICM) in a Spanish medium-size hospital located in the Valencia Region. Analysis of the target compounds in the hospital wastewater was performed by means of solid phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry analysis (HPLC-MS/MS). A screening level risk assessment combining the measured environmental concentrations (MECs) with dose-response data based on Predicted No Effect Concentration (PNEC) was also applied to estimate Hazard Quotients (HQs) for the compounds investigated. Additionally, the environmental hazard associated to the various compounds measured was assessed through the calculation of the Persistence, Bioaccumulation and Toxicity (PBT) Index, which categorizes compounds according to their environmentally damaging characteristics. The results of the study showed the presence of twenty-four out of the twenty-six compounds analysed at individual concentrations ranging from 5 ng L(-1) to 2 mg L(-1). The highest concentrations corresponded to the ICM iomeprol, found at levels between 424 and 2093 μg L(-1), the analgesic acetaminophen (15-44 μg L(-1)), the diuretic (DIU) furosemide (6-15 μg L(-1)), and the antibiotics (ABIs) ofloxacin and trimethoprim (2-5 μg L(-1)). The lowest levels corresponded to the anti-inflammatory propyphenazone, found at concentrations between 5 and 44 ng L(-1). Differences in terms of concentrations of the analysed compounds have been observed in all the therapeutic groups when comparing the results obtained in this and other recent studies carried out in hospitals with different characteristics from different geographical areas and in different seasons. The screening level risk assessment performed in raw water from the hospital effluent showed that the analgesics and anti-inflammatories (AAFs) acetaminophen, diclofenac, ibuprofen and naproxen, the antibiotics (ABIs) clarithromycin, ofloxacin and trimethoprim, and the β-blocker (BBL) propranolol were present at concentrations leading to HQ values higher than 10, thus indicating high risk. When applying a factor to take into account potential dilution and degradation processes, only the compound ibuprofen showed a HQ higher than 1. Likewise, the cumulative HQ or Toxic Units (TUs) calculated in the raw water for each of the therapeutic groups studied showed that these three classes of drugs were at concentrations high enough to potentially generate high risk to aquatic organisms while taking into account possible dilution and degradation processes only one of them, the AAFs can be considered to represent high risk. Finally, the environmental hazard assessment performed showed that the AAFs diclofenac and ibuprofen and the ABI clarithromycin have the highest, maximum value of 9 of PBT Index due to their inherent environmentally damaging characteristics of persistence, bioaccumulation and toxicity. The methodology followed in the present case study can be taken as a novel approach to classify and categorize pharmaceuticals on the basis of their occurrence in hospital effluents, their derived environmental risks, and their associated environmental hazard. This classification becomes important because it can be used as a model or orientation for hospitals in the process of developing environmentally sustainable policies and as an argument to justify the adoption of advanced, specific treatments for hospital effluents before being discharged into the public sewage system. Copyright © 2015 Elsevier Inc. All rights reserved.

Accumulated sediments in a detention basin: chemical and microbial hazard assessment linked to hydrological processes.

PubMed

Sébastian, C; Barraud, S; Ribun, S; Zoropogui, A; Blaha, D; Becouze-Lareure, C; Kouyi, G Lipeme; Cournoyer, B

2014-04-01

Accumulated sediments in a 32,000-m(3) detention basin linked to a separate stormwater system were characterized in order to infer their health hazards. A sampling scheme of 15 points was defined according to the hydrological behaviour of the basin. Physical parameters (particle size and volatile organic matter content) were in the range of those previously reported for stormwater sediments. Chemical analyses on hydrocarbons, PAHs, PCBs and heavy metals showed high pollutant concentrations. Microbiological analyses of these points highlighted the presence of faecal indicator bacteria (Escherichia coli and intestinal enterococci) and actinomycetes of the genus Nocardia. These are indicative of the presence of human pathogens. E. coli and enterococcal numbers in the sediments were higher at the proximity of the low-flow gutter receiving waters from the catchment. These bacteria appeared to persist over time among urban sediments. Samples highly contaminated by hydrocarbons were also shown to be heavily contaminated by these bacteria. These results demonstrated for the first time the presence of Nocardial actinomycetes in such an urban context with concentrations as high as 11,400 cfu g(-1).

Hazard Analysis for the Mark III Space Suit Assembly (SSA) Used in One-g Operations

NASA Technical Reports Server (NTRS)

Mitchell, Kate; Ross, Amy; Blanco, Raul; Wood, Art

2012-01-01

This Hazard Analysis document encompasses the Mark III Space Suit Assembly (SSA) and associated ancillary equipment. It has been prepared using JSC17773, "Preparing Hazard Analyses for JSC Ground Operation", as a guide. The purpose of this document is to present the potential hazards involved in ground (23 % maximum O2, One-g) operations of the Mark III and associated ancillary support equipment system. The hazards listed in this document are specific to suit operations only; each supporting facility (Bldg. 9, etc.) is responsible for test specific Hazard Analyses. A "hazard" is defined as any condition that has the potential for harming personnel or equipment. This analysis was performed to document the safety aspects associated with manned use of the Mark III for pressurized and unpressurized ambient, ground-based, One-g human testing. The hazards identified herein represent generic hazards inherent to all standard JSC test venues for nominal ground test configurations. Non-standard test venues or test specific configurations may warrant consideration of additional hazards analysis prior to test. The cognizant suit engineer is responsible for the safety of the astronaut/test subject, space suit, and suit support personnel. The test requester, for the test supported by the suit test engineer and suited subject, is responsible for overall safety and any necessary Test Readiness Reviews (TRR).

System hazards in managing laboratory test requests and results in primary care: medical protection database analysis and conceptual model.

PubMed

Bowie, Paul; Price, Julie; Hepworth, Neil; Dinwoodie, Mark; McKay, John

2015-11-27

To analyse a medical protection organisation's database to identify hazards related to general practice systems for ordering laboratory tests, managing test results and communicating test result outcomes to patients. To integrate these data with other published evidence sources to inform design of a systems-based conceptual model of related hazards. A retrospective database analysis. General practices in the UK and Ireland. 778 UK and Ireland general practices participating in a medical protection organisation's clinical risk self-assessment (CRSA) programme from January 2008 to December 2014. Proportion of practices with system risks; categorisation of identified hazards; most frequently occurring hazards; development of a conceptual model of hazards; and potential impacts on health, well-being and organisational performance. CRSA visits were undertaken to 778 UK and Ireland general practices of which a range of systems hazards were recorded across the laboratory test ordering and results management systems in 647 practices (83.2%). A total of 45 discrete hazard categories were identified with a mean of 3.6 per practice (SD=1.94). The most frequently occurring hazard was the inadequate process for matching test requests and results received (n=350, 54.1%). Of the 1604 instances where hazards were recorded, the most frequent was at the 'postanalytical test stage' (n=702, 43.8%), followed closely by 'communication outcomes issues' (n=628, 39.1%). Based on arguably the largest data set currently available on the subject matter, our study findings shed new light on the scale and nature of hazards related to test results handling systems, which can inform future efforts to research and improve the design and reliability of these systems. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Analysis and design of randomised clinical trials involving competing risks endpoints.

PubMed

Tai, Bee-Choo; Wee, Joseph; Machin, David

2011-05-19

In randomised clinical trials involving time-to-event outcomes, the failures concerned may be events of an entirely different nature and as such define a classical competing risks framework. In designing and analysing clinical trials involving such endpoints, it is important to account for the competing events, and evaluate how each contributes to the overall failure. An appropriate choice of statistical model is important for adequate determination of sample size. We describe how competing events may be summarised in such trials using cumulative incidence functions and Gray's test. The statistical modelling of competing events using proportional cause-specific and subdistribution hazard functions, and the corresponding procedures for sample size estimation are outlined. These are illustrated using data from a randomised clinical trial (SQNP01) of patients with advanced (non-metastatic) nasopharyngeal cancer. In this trial, treatment has no effect on the competing event of loco-regional recurrence. Thus the effects of treatment on the hazard of distant metastasis were similar via both the cause-specific (unadjusted csHR = 0.43, 95% CI 0.25 - 0.72) and subdistribution (unadjusted subHR 0.43; 95% CI 0.25 - 0.76) hazard analyses, in favour of concurrent chemo-radiotherapy followed by adjuvant chemotherapy. Adjusting for nodal status and tumour size did not alter the results. The results of the logrank test (p = 0.002) comparing the cause-specific hazards and the Gray's test (p = 0.003) comparing the cumulative incidences also led to the same conclusion. However, the subdistribution hazard analysis requires many more subjects than the cause-specific hazard analysis to detect the same magnitude of effect. The cause-specific hazard analysis is appropriate for analysing competing risks outcomes when treatment has no effect on the cause-specific hazard of the competing event. It requires fewer subjects than the subdistribution hazard analysis for a similar effect size. However, if the main and competing events are influenced in opposing directions by an intervention, a subdistribution hazard analysis may be warranted.

Use of the quality management system "JACIE" and outcome after hematopoietic stem cell transplantation.

PubMed

Gratwohl, Alois; Brand, Ronald; McGrath, Eoin; van Biezen, Anja; Sureda, Anna; Ljungman, Per; Baldomero, Helen; Chabannon, Christian; Apperley, Jane

2014-05-01

Competent authorities, healthcare payers and hospitals devote increasing resources to quality management systems but scientific analyses searching for an impact of these systems on clinical outcome remain scarce. Earlier data indicated a stepwise improvement in outcome after allogeneic hematopoietic stem cell transplantation with each phase of the accreditation process for the quality management system "JACIE". We therefore tested the hypothesis that working towards and achieving "JACIE" accreditation would accelerate improvement in outcome over calendar time. Overall mortality of the entire cohort of 107,904 patients who had a transplant (41,623 allogeneic, 39%; 66,281 autologous, 61%) between 1999 and 2006 decreased over the 14-year observation period by a factor of 0.63 per 10 years (hazard ratio: 0.63; 0.58-0.69). Considering "JACIE"-accredited centers as those with programs having achieved accreditation by November 2012, at the latest, this improvement was significantly faster in "JACIE"-accredited centers than in non-accredited centers (approximately 5.3% per year for 49,459 patients versus approximately 3.5% per year for 58,445 patients, respectively; hazard ratio: 0.83; 0.71-0.97). As a result, relapse-free survival (hazard ratio 0.85; 0.75-0.95) and overall survival (hazard ratio 0.86; 0.76-0.98) were significantly higher at 72 months for those patients transplanted in the 162 "JACIE"-accredited centers. No significant effects were observed after autologous transplants (hazard ratio 1.06; 0.99-1.13). Hence, working towards implementation of a quality management system triggers a dynamic process associated with a steeper reduction in mortality over the years and a significantly improved survival after allogeneic stem cell transplantation. Our data support the use of a quality management system for complex medical procedures.

The effects of momentary visual disruption on hazard anticipation and awareness in driving.

PubMed

Borowsky, Avinoam; Horrey, William J; Liang, Yulan; Garabet, Angela; Simmons, Lucinda; Fisher, Donald L

2015-01-01

Driver distraction is known to increase crash risk, especially when a driver glances inside the vehicle for especially long periods of time. Though it is clear that such glances increase the risk for the driver when looking inside the vehicle, it is less clear how these glances disrupt the ongoing processing of information outside the vehicle once the driver's eyes return to the road. The present study was aimed at exploring the effect of in-vehicle glances on the top-down processes that guide the detection and monitoring of hazards on the forward roadway. Using a driving simulator, 12 participants were monitored with an eye-tracking system while they navigated various hazardous scenarios. Six participants were momentarily interrupted by a visual secondary task (simulating a glance inside the vehicle) prior to the occurrence of a potential hazard and 6 were not. Eye movement analyses showed that interrupted drivers often failed to continue scanning for a potential hazard when their forward view reappeared, especially when the potential threat could not easily be localized. Additionally, drivers' self-appraisal of workload and performance of the driving task indicated that, contrary to what one might expect, drivers in the interruption condition reported workload levels lower than and performance equal to drivers in the no interruption condition. Drivers who are momentarily disrupted even for a brief duration are at risk of missing important information when they return their gaze to the forward roadway. In addition, because they are not aware of missing this information they are likely to continue engaging in in-vehicle tasks even though they are demonstrably unsafe. The implications for safety, calibration, and targeted remediation are discussed.

78 FR 54178 - Virginia: Final Authorization of State Hazardous Waste Management Program Revisions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

...] Perform inspections, and require monitoring, tests, analyses or reports; [cir] Enforce RCRA requirements... (revision Federal Register Analogous Virginia checklists \\1\\) authority RCRA Cluster XVII Hazardous Waste... Cluster XVIII Regulation of Oil-Bearing 73 FR 57, January 9 VAC Sec. Sec. 20- Hazardous Secondary...

Reverberant Microwave Propagation

DTIC Science & Technology

2008-10-01

HERO Hazards of Electromagnetic Radiation to Ordnance HP Hewlett Packard HWD Half-Wave Dipole IEC International Electrotechnical Commission IEE...composite panels used in new ship design; Hazards of Electromagnetic Radiation to Ordnance ( HERO ) analyses; and digital wireless system performance...Electro-Explosive Device EMC Electromagnetic Compatibility ft Foot (feet) GHz Gigahertz HERO Hazards of Electromagnetic

49 CFR 659.31 - Hazard management process.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., operational changes, or other changes within the rail transit environment. (b) The hazard management process must, at a minimum: (1) Define the rail transit agency's approach to hazard management and the... Agency § 659.31 Hazard management process. (a) The oversight agency must require the rail transit agency...

49 CFR 659.31 - Hazard management process.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., operational changes, or other changes within the rail transit environment. (b) The hazard management process must, at a minimum: (1) Define the rail transit agency's approach to hazard management and the... Agency § 659.31 Hazard management process. (a) The oversight agency must require the rail transit agency...

Real-time Position Based Population Data Analysis and Visualization Using Heatmap for Hazard Emergency Response

NASA Astrophysics Data System (ADS)

Ding, R.; He, T.

2017-12-01

With the increased popularity in mobile applications and services, there has been a growing demand for more advanced mobile technologies that utilize real-time Location Based Services (LBS) data to support natural hazard response efforts. Compared to traditional sources like the census bureau that often can only provide historical and static data, an LBS service can provide more current data to drive a real-time natural hazard response system to more accurately process and assess issues such as population density in areas impacted by a hazard. However, manually preparing or preprocessing the data to suit the needs of the particular application would be time-consuming. This research aims to implement a population heatmap visual analytics system based on real-time data for natural disaster emergency management. System comprised of a three-layered architecture, including data collection, data processing, and visual analysis layers. Real-time, location-based data meeting certain polymerization conditions are collected from multiple sources across the Internet, then processed and stored in a cloud-based data store. Parallel computing is utilized to provide fast and accurate access to the pre-processed population data based on criteria such as the disaster event and to generate a location-based population heatmap as well as other types of visual digital outputs using auxiliary analysis tools. At present, a prototype system, which geographically covers the entire region of China and combines population heat map based on data from the Earthquake Catalogs database has been developed. It Preliminary results indicate that the generation of dynamic population density heatmaps based on the prototype system has effectively supported rapid earthquake emergency rescue and evacuation efforts as well as helping responders and decision makers to evaluate and assess earthquake damage. Correlation analyses that were conducted revealed that the aggregation and movement of people depended on various factors, including earthquake occurrence time and location of epicenter. This research hopes to continue to build upon the success of the prototype system in order to improve and extend the system to support the analysis of earthquakes and other types of natural hazard events.

Investigating environmental tectonics in Northern Alpine Foreland of Europe

NASA Astrophysics Data System (ADS)

ENTEC Working Group; Cloetingh, Sierd; Ziegler, Peter; Cornu, Tristan

Until now, research on neotectonics and related seismicity has mostly focused on active plate boundaries characterized by a generally high level of earthquake activity. Current seismic hazard estimates for intraplate areas are commonly based on probabilistic analyses of historical and instrumental earthquake data. The accuracy of these hazard estimates is limited by the nature of the data (e.g., ambiguous historical sources), and by the restriction of available earthquake catalogues to time scales of only a few hundred years. Both of these are geologically insignificant and unsuitable for describing tectonic processes causing earthquakes. This is especially relevant to intraplate regions, where faults show low slip rates resulting in long average recurrence times for large earthquakes (103 to 106 yrs), such as the devastating Basel earthquake of 1356, with an estimated magnitude of 6.5.

Decontamination and management of human remains following incidents of hazardous chemical release.

PubMed

Hauschild, Veronique D; Watson, Annetta; Bock, Robert

2012-01-01

To provide specific guidance and resources for systematic and orderly decontamination of human remains resulting from a chemical terrorist attack or accidental chemical release. A detailed review and health-based decision criteria protocol is summarized. Protocol basis and logic are derived from analyses of compound-specific toxicological data and chemical/physical characteristics. Guidance is suitable for civilian or military settings where human remains potentially contaminated with hazardous chemicals may be present, such as sites of transportation accidents, terrorist operations, or medical examiner processing points. Guidance is developed from data-characterizing controlled experiments with laboratory animals, fabrics, and materiel. Logic and specific procedures for decontamination and management of remains, protection of mortuary affairs personnel, and decision criteria to determine when remains are sufficiently decontaminated are presented. Established procedures as well as existing materiel and available equipment for decontamination and verification provide reasonable means to mitigate chemical hazards from chemically exposed remains. Unique scenarios such as those involving supralethal concentrations of certain liquid chemical warfare agents may prove difficult to decontaminate but can be resolved in a timely manner by application of the characterized systematic approaches. Decision criteria and protocols to "clear" decontaminated remains for transport and processing are also provided. Once appropriate decontamination and verification have been accomplished, normal procedures for management of remains and release can be followed.

Historical relationship between performance assessment for radioactive waste disposal and other types of risk assessment.

PubMed

Rechard, R P

1999-10-01

This article describes the evolution of the process for assessing the hazards of a geologic disposal system for radioactive waste and, similarly, nuclear power reactors, and the relationship of this process with other assessments of risk, particularly assessments of hazards from manufactured carcinogenic chemicals during use and disposal. This perspective reviews the common history of scientific concepts for risk assessment developed until the 1950s. Computational tools and techniques developed in the late 1950s and early 1960s to analyze the reliability of nuclear weapon delivery systems were adopted in the early 1970s for probabilistic risk assessment of nuclear power reactors, a technology for which behavior was unknown. In turn, these analyses became an important foundation for performance assessment of nuclear waste disposal in the late 1970s. The evaluation of risk to human health and the environment from chemical hazards is built on methods for assessing the dose response of radionuclides in the 1950s. Despite a shared background, however, societal events, often in the form of legislation, have affected the development path for risk assessment for human health, producing dissimilarities between these risk assessments and those for nuclear facilities. An important difference is the regulator's interest in accounting for uncertainty.

Remote sensing applied in natural hazards mitigation - experiences from the international UNESCO/IUGS GARS-Program 1984 - 2002

NASA Astrophysics Data System (ADS)

Bannert, D.

Worldwide resources of arable land, water, groundwater, forest and expanding human habitat are under increasing pressure almost anywhere. Especially the non- industrialised countries with their rapidly increasing population are facing severe problems from natural catastrophes such as landslides, volcanic and seismic hazards, soil degradation and shortage of water or flooding. Geo-environmental research can help to identify the causes for these events, define the rehabilitation and can lead to early warning systems. Remote sensing adds considerable knowledge by providing a wide variety of sensors applied form airborne and space platforms, the data of which, once analysed, can provide completely new observations on natural risk areas. The UNESCO/IUGS sponsored GARS Program since 1984 is conducting- joint research with institutions in industrialised and developing countries. As of today, more than 40 institutes and individuals worldwide have joined the GARS- Program. Results of their research are among others contributions toLandslide assessment qVolcanic risk qCoastal hazards qDesertification processes q Space organisations and financing institutions serving developing nations are requested to help to deploy new sensors to monitor geo-dynamic processes, providing free and direct data reception in all parts of the world in order to allow national institutes to develop their own early warning capabilities.

Learning lessons from Natech accidents - the eNATECH accident database

NASA Astrophysics Data System (ADS)

Krausmann, Elisabeth; Girgin, Serkan

2016-04-01

When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of equipment vulnerability models linking the natural-hazard severity to the observed damage almost impossible. As a consequence, the European Commission has set up the eNATECH database for the systematic collection of Natech accident data and near misses. The database exhibits the more sophisticated accident representation required to capture the characteristics of Natech events and is publicly accessible at http://enatech.jrc.ec.europa.eu. This presentation outlines the general lessons-learning process, introduces the eNATECH database and its specific structure, and discusses natural-hazard specific lessons learned and features common to Natech accidents triggered by different natural hazards.

ACID EVAPORATION OF ULTIMA GOLD TM AB LIQUID SCINTILLATION COCKTAIL RESIDUE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kyser, E.; Fondeur, F.; Crump, S.

2011-12-21

Prior analyses of samples from the F/H Lab solutions showed the presence of diisopropylnapthalene (DIN), a major component of Ultima Gold{trademark} AB liquid scintillation cocktail (LSC). These solutions are processed through H-Canyon Tank 10.5 and ultimately through the 17.8E evaporator. Similar solutions originated in SRNL streams sent to the same H Canyon tanks. This study examined whether the presence of these organics poses a process-significant hazard for the evaporator. Evaporation and calorimetry testing of surrogate samples containing 2000 ppm of Ultima Gold{trademark} AB LSC in 8 M nitric acid have been completed. These experiments showed that although reactions between nitricmore » acid and the organic components do occur, they do not appear to pose a significant hazard for runaway reactions or generation of energetic compounds in canyon evaporators. The amount of off-gas generated was relatively modest and appeared to be well within the venting capacity of the H-Canyon evaporators. A significant fraction of the organic components likely survives the evaporation process primarily as non-volatile components that are not expected to represent any new process concerns during downstream operations such as neutralization. Laboratory Waste solutions containing minor amounts of DIN can be safely received, stored, transferred, and processed through the canyon waste evaporator.« less

75 FR 5167 - Office of Hazardous Materials Safety; Notice of Delays In Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Delays In Processing of Special Permits Applications AGENCY: Pipeline..., Office of Hazardous Materials Special Permits and Approvals, Pipeline and Hazardous Materials Safety...

75 FR 78800 - Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications AGENCY: Pipeline..., Office of Hazardous Materials Special Permits and Approvals, Pipeline and Hazardous Materials Safety...

Integrating Remote Sensing Data, Hybrid-Cloud Computing, and Event Notifications for Advanced Rapid Imaging & Analysis (Invited)

NASA Astrophysics Data System (ADS)

Hua, H.; Owen, S. E.; Yun, S.; Lundgren, P.; Fielding, E. J.; Agram, P.; Manipon, G.; Stough, T. M.; Simons, M.; Rosen, P. A.; Wilson, B. D.; Poland, M. P.; Cervelli, P. F.; Cruz, J.

2013-12-01

Space-based geodetic measurement techniques such as Interferometric Synthetic Aperture Radar (InSAR) and Continuous Global Positioning System (CGPS) are now important elements in our toolset for monitoring earthquake-generating faults, volcanic eruptions, hurricane damage, landslides, reservoir subsidence, and other natural and man-made hazards. Geodetic imaging's unique ability to capture surface deformation with high spatial and temporal resolution has revolutionized both earthquake science and volcanology. Continuous monitoring of surface deformation and surface change before, during, and after natural hazards improves decision-making from better forecasts, increased situational awareness, and more informed recovery. However, analyses of InSAR and GPS data sets are currently handcrafted following events and are not generated rapidly and reliably enough for use in operational response to natural disasters. Additionally, the sheer data volumes needed to handle a continuous stream of InSAR data sets also presents a bottleneck. It has been estimated that continuous processing of InSAR coverage of California alone over 3-years would reach PB-scale data volumes. Our Advanced Rapid Imaging and Analysis for Monitoring Hazards (ARIA-MH) science data system enables both science and decision-making communities to monitor areas of interest with derived geodetic data products via seamless data preparation, processing, discovery, and access. We will present our findings on the use of hybrid-cloud computing to improve the timely processing and delivery of geodetic data products, integrating event notifications from USGS to improve the timely processing for response, as well as providing browse results for quick looks with other tools for integrative analysis.

The 2008 U.S. Geological Survey national seismic hazard models and maps for the central and eastern United States

USGS Publications Warehouse

Petersen, Mark D.; Frankel, Arthur D.; Harmsen, Stephen C.; Mueller, Charles S.; Boyd, Oliver S.; Luco, Nicolas; Wheeler, Russell L.; Rukstales, Kenneth S.; Haller, Kathleen M.

2012-01-01

In this paper, we describe the scientific basis for the source and ground-motion models applied in the 2008 National Seismic Hazard Maps, the development of new products that are used for building design and risk analyses, relationships between the hazard maps and design maps used in building codes, and potential future improvements to the hazard maps.

Co-Creating theories and research design for an interdisciplinary project dealing with capacity building for people with migration background in Austria

NASA Astrophysics Data System (ADS)

Weber, Karin; Tscharner, Susanna; Stickler, Therese; Fuchs, Britta; Damyanovic, Doris; Hübl, Johannes

2017-04-01

Understanding spatial and social aspects of vulnerability is of growing importance in the context of climate change and natural hazards. The interplay of structural factors, socio-demographic aspects, current risk communication strategies, spatial planning instruments and related processes and the current spatial and environmental situation, including hazards and hazard zones, geographical locations, building and settlement types, contributing to people`s vulnerabilities needs to be analysed and understood to reduce vulnerability and to foster resilience. The project "CCCapMig" (Climate change and capacity building for people with migration background in Austria) aims at linking spatial and technical, as well as organisational and social aspects of climate change and natural hazards. This paper focuses on the co-creation of the theoretical framework and concepts and outlines the research design for this interdisciplinary cross-analysis of several case studies in rural Austria. The project is designed as an inter- and transdisciplinary survey and brings together engineering sciences, spatial sciences and social sciences. Reflecting the interdisciplinary approach, a theoretical framework was developed that refers to a combination of both theories and frameworks from vulnerability research, theories of risk perception and spatial theories and methods like the Sustainable Livelihoods Framework, the Protection-Motivation Theory and Landscape-Planning Theories: The "Sustainable Livelihoods Framework" adapted (by FA0) for disaster risk management offers an analytical framework to understand the emergence of vulnerabilities from the perspective of people`s livelihoods on individual and community level. It includes human, social, natural, physical and financial aspects and the role of institutions, policies and legal rights in reducing or increasing exposure to disaster risk and coping capacities. Additionally, theories on risk perception, especially Protection-Motivation Theory, developed by social sciences, will be used as assessment frame to understand people`s flood damage mitigation behaviour. Furthermore, spatial theories and landscape planning approaches (like an everyday, evidence-based approach) are combined with theories from social sciences reflecting the interdisciplinary approach of this project that has become standard in studies on disaster and climate change. This theoretical approach was developed through a collaborative research at the beginning of the research design in order to a) develop further and test existing concepts, b) to fine-tune the proposed method setting, c) to foster common understanding of theories and methods within the interdisciplinary research team. In general, the research process is characterised by critical theory and brings in reflective elements, allowing feedback circles between methods and theories. End-users and decision-makers will be integral partners, ensuring that feasibility of the recommendations and guidelines will be guaranteed. Consequently, the methods of data collection in this project reflect the results of the critical discussion of the theoretical frameworks and combine methods of social sciences: interviews with inhabitants living in hazard zones, detailed surveys of families, focus group discussions, and expert interviews with local and regional stakeholders involved in disaster risk management. In addition to that, structural factors, demographic data, current risk communication strategies, legal instruments and related processes and the current spatial and environmental situation (including hazards and hazard zones, geographical locations, building and settlement types) are analysed.

A conflict model for the international hazardous waste disposal dispute.

PubMed

Hu, Kaixian; Hipel, Keith W; Fang, Liping

2009-12-15

A multi-stage conflict model is developed to analyze international hazardous waste disposal disputes. More specifically, the ongoing toxic waste conflicts are divided into two stages consisting of the dumping prevention and dispute resolution stages. The modeling and analyses, based on the methodology of graph model for conflict resolution (GMCR), are used in both stages in order to grasp the structure and implications of a given conflict from a strategic viewpoint. Furthermore, a specific case study is investigated for the Ivory Coast hazardous waste conflict. In addition to the stability analysis, sensitivity and attitude analyses are conducted to capture various strategic features of this type of complicated dispute.

Guidelines for safe handling of hazardous drugs: A systematic review

PubMed Central

Bernabeu-Martínez, Mari A.; Ramos Merino, Mateo; Santos Gago, Juan M.; Álvarez Sabucedo, Luis M.; Wanden-Berghe, Carmina

2018-01-01

Objective To review the scientific literature related to the safe handling of hazardous drugs (HDs). Method Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. Results In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Conclusions Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion. PMID:29750798

Guidelines for safe handling of hazardous drugs: A systematic review.

PubMed

Bernabeu-Martínez, Mari A; Ramos Merino, Mateo; Santos Gago, Juan M; Álvarez Sabucedo, Luis M; Wanden-Berghe, Carmina; Sanz-Valero, Javier

2018-01-01

To review the scientific literature related to the safe handling of hazardous drugs (HDs). Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion.

Physically and psychologically hazardous jobs and mental health in Thailand

PubMed Central

Yiengprugsawan, Vasoontara; Strazdins, Lyndall; Lim, Lynette L.-Y.; Kelly, Matthew; Seubsman, Sam-ang; Sleigh, Adrian C.

2015-01-01

This paper investigates associations between hazardous jobs, mental health and wellbeing among Thai adults. In 2005, 87 134 distance-learning students from Sukhothai Thammathirat Open University completed a self-administered questionnaire; at the 2009 follow-up 60 569 again participated. Job characteristics were reported in 2005, psychological distress and life satisfaction were reported in both 2005 and 2009. We derived two composite variables grading psychologically and physically hazardous jobs and reported adjusted odds ratios (AOR) from multivariate logistic regressions. Analyses focused on cohort members in paid work: the total was 62 332 at 2005 baseline and 41 671 at 2009 follow-up. Cross-sectional AORs linking psychologically hazardous jobs to psychological distress ranged from 1.52 (one hazard) to 4.48 (four hazards) for males and a corresponding 1.34–3.76 for females. Similarly AORs for physically hazardous jobs were 1.75 (one hazard) to 2.76 (four or more hazards) for males and 1.70–3.19 for females. A similar magnitude of associations was found between psychologically adverse jobs and low life satisfaction (AORs of 1.34–4.34 among males and 1.18–3.63 among females). Longitudinal analyses confirm these cross-sectional relationships. Thus, significant dose–response associations were found linking hazardous job exposures in 2005 to mental health and wellbeing in 2009. The health impacts of psychologically and physically hazardous jobs in developed, Western countries are equally evident in transitioning Southeast Asian countries such as Thailand. Regulation and monitoring of work conditions will become increasingly important to the health and wellbeing of the Thai workforce. PMID:24218225

Hazard analysis of Clostridium perfringens in the Skylab Food System

NASA Technical Reports Server (NTRS)

Bourland, C. T.; Huber, C. S.; Kiser, P. R.; Heidelbaugh, N. D.; Rowley, D. B.

1974-01-01

The Skylab Food System presented unique microbiological problems because food was warmed in null-gravity and because the heat source was limited to 69.4 C (to prevent boiling in null-gravity). For these reasons, the foods were manufactured using critical control point techniques of quality control coupled with appropriate hazard analyses. One of these hazard analyses evaluated the threat from Clostridium perfringens. Samples of food were inoculated with C. perfringens and incubated for 2 h at temperatures ranging from 25 to 55 C. Generation times were determined for the foods at various temperatures. Results of these tests were evaluated taking into consideration: food-borne disease epidemiology, the Skylab food manufacturing procedures, and the performance requirements of the Skylab Food System. Based on this hazard analysis, a limit for C. perfringens of 100/g was established for Skylab foods.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Volume 1; Appendices

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g., missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Appendices; Volume 2

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g. missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Tree failures and accidents in recreation areas: a guide to data management for hazard control

Treesearch

Lee A. Paine; James W. Clarke

1978-01-01

A data management system has been developed for storage and retrieval of tree failure and hazard data, with provision for computer analyses and presentation of results in useful tables. This system emphasizes important relationships between tree characteristics, environmental factors, and the resulting hazard. The analysis programs permit easy selection of subsets of...

Effects of Acoustic Impulses on the Middle Ear

DTIC Science & Technology

2017-10-01

conditioned response; middle ear; damage-risk criteria; health hazard evaluation ACCOMPLISHMENTS: What were the major goals of the project? The...participants declined to participate after the study was described during the informed consent process. The results of V1 were used to evaluate participant...0.64 0.73 4000 Hz 0.82 0.78 0.85 0.68 0.63 0.73 1 or 2 kHz 0.93 0.90 0.95 – – – 13 Evaluation of RTs Analyses of reflexive tasks

[Risk, cause and disease in the occupational environment. Neurologic risk factors].

PubMed

Maqueda-Blasco, J

In this paper we study the epidemiological criteria and those of etiological investigation which should be considered when analysing and investigating problems with health due to exposure to occupational hazards, with special attention to neurological damage due to chemical or physical contamination or to the ergonometric requirements of the task. We define the part played by occupational hazards in causing disease both professional and related to other occupations. The different preventive models used in the history of prevention of professional hazards are analysed. Particular attention is paid to the so-called socio-technical model which considers illness as dysfunction of the relation man/work. The neurological risk factors are analysed separately; therefore we emphasize the different neurotoxic chemicals, physical and ergonomic agents (the latter may be considered a pandemic in the workplace), and we establish the relationships with the main clinical and functional disorders of the central and peripheral nervous systems and the musculoskeletal system.

Low-hazard metallography of moisture-sensitive electrochemical cells.

PubMed

Wesolowski, D E; Rodriguez, M A; McKenzie, B B; Papenguth, H W

2011-08-01

A low-hazard approach is presented to prepare metallographic cross-sections of moisture-sensitive battery components. The approach is tailored for evaluation of thermal (molten salt) batteries composed of thin pressed-powder pellets, but has general applicability to other battery electrochemistries. Solution-cast polystyrene is used to encapsulate cells before embedding in epoxy. Nonaqueous grinding and polishing are performed in an industrial dry room to increase throughput. Lapping oil is used as a lubricant throughout grinding. Hexane is used as the solvent throughout processing; occupational exposure levels are well below the limits. Light optical and scanning electron microscopy on cross-sections are used to analyse a thermal battery cell. Spatially resolved X-ray diffraction on oblique angle cut cells complement the metallographic analysis. Published 2011. This article is a US Government work and is in the public domain in the USA.

Extending natural hazard impacts: an assessment of landslide disruptions on a national road transportation network

NASA Astrophysics Data System (ADS)

Postance, Benjamin; Hillier, John; Dijkstra, Tom; Dixon, Neil

2017-01-01

Disruptions to transportation networks by natural hazard events cause direct losses (e.g. by physical damage) and indirect socio-economic losses via travel delays and decreased transportation efficiency. The severity and spatial distribution of these losses varies according to user travel demands and which links, nodes or infrastructure assets are physically disrupted. Increasing transport network resilience, for example by targeted mitigation strategies, requires the identification of the critical network segments which if disrupted would incur undesirable or unacceptable socio-economic impacts. Here, these impacts are assessed on a national road transportation network by coupling hazard data with a transport network model. This process is illustrated using a case study of landslide hazards on the road network of Scotland. A set of possible landslide-prone road segments is generated using landslide susceptibility data. The results indicate that at least 152 road segments are susceptible to landslides, which could cause indirect economic losses exceeding £35 k for each day of closure. In addition, previous estimates for historic landslide events might be significant underestimates. For example, the estimated losses for the 2007 A83 ‘Rest and Be Thankful’ landslide are £80 k day-1, totalling £1.2 million over a 15 day closure, and are ˜60% greater than previous estimates. The spatial distribution of impact to road users is communicated in terms of ‘extended hazard impact footprints’. These footprints reveal previously unknown exposed communities and unanticipated spatial patterns of severe disruption. Beyond cost-benefit analyses for landslide mitigation efforts, the approach implemented is applicable to other natural hazards (e.g. flooding), combinations of hazards, or even other network disruption events.

Assessing residential buildings value in Spain for risk analyses. Application to the landslide hazard in the Autonomous Community of Valencia

NASA Astrophysics Data System (ADS)

Cantarino, I.; Torrijo, F. J.; Palencia, S.; Gielen, E.

2014-05-01

This paper proposes a method of valuing the stock of residential buildings in Spain as the first step in assessing possible damage caused to them by natural hazards. For the purposes of the study we had access to the SIOSE (the Spanish Land Use and Cover Information System), a high-resolution land-use model, as well as to a report on the financial valuations of this type of buildings throughout Spain. Using dasymetric disaggregation processes and GIS techniques we developed a geolocalized method of obtaining this information, which was the exposure variable in the general risk assessment formula. If hazard maps and risk assessment methods - the other variables - are available, the risk value can easily be obtained. An example of its application is given in a case study that assesses the risk of a landslide in the entire 23 200 km2 of the Valencia Autonomous Community (NUT2), the results of which are analyzed by municipal areas (LAU2) for the years 2005 and 2009.

Some aspects of risks and natural hazards in the rainfall variability space of Rwanda.

NASA Astrophysics Data System (ADS)

Nduwayezu, Emmanuel; Derron, Marc-Henri; Jaboyedoff, Michel; Penna, Ivanna; Kanevski, Mikhaïl

2014-05-01

Rwanda is facing challenges related to its dispersed population and their density. Risk assessment for natural disasters is becoming important in order to reduce the extent and damages of natural disasters. Rwanda is a country with a diversity of landscapes. Its mountains and marshes have been considered as a water reserve, a forest and grazing reserve by the population (currently around 11 million). Due to geologic and climate conditions, the country is subject of different natural processes, in particular hydrological events (flooding and also landslides), but also earthquakes and volcanism, which the communities have to live with in the western part. In the last years, population expansion for land by clearing of forests and draining marshes, seems to be acting as an aggravating factor. Therefore, a risk assessment for rainfall related hazards requires a deep understanding of the precipitation patterns. Based on satellite image interpretation, historical reports of events, and the analysis of rainfalls variability mapping and probabilistic analyses of events, the aim of this case study is to produce an overview and a preliminary assessment of the hazards scenario in Rwanda.

Analysis of Precipitation (Rain and Snow) Levels and Straight-line Wind Speeds in Support of the 10-year Natural Phenomena Hazards Review for Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Elizabeth J.; Dewart, Jean Marie; Deola, Regina

This report provides site-specific return level analyses for rain, snow, and straight-line wind extreme events. These analyses are in support of the 10-year review plan for the assessment of meteorological natural phenomena hazards at Los Alamos National Laboratory (LANL). These analyses follow guidance from Department of Energy, DOE Standard, Natural Phenomena Hazards Analysis and Design Criteria for DOE Facilities (DOE-STD-1020-2012), Nuclear Regulatory Commission Standard Review Plan (NUREG-0800, 2007) and ANSI/ ANS-2.3-2011, Estimating Tornado, Hurricane, and Extreme Straight-Line Wind Characteristics at Nuclear Facility Sites. LANL precipitation and snow level data have been collected since 1910, although not all years are complete.more » In this report the results from the more recent data (1990–2014) are compared to those of past analyses and a 2004 National Oceanographic and Atmospheric Administration report. Given the many differences in the data sets used in these different analyses, the lack of statistically significant differences in return level estimates increases confidence in the data and in the modeling and analysis approach.« less

Disaggregated seismic hazard and the elastic input energy spectrum: An approach to design earthquake selection

NASA Astrophysics Data System (ADS)

Chapman, Martin Colby

1998-12-01

The design earthquake selection problem is fundamentally probabilistic. Disaggregation of a probabilistic model of the seismic hazard offers a rational and objective approach that can identify the most likely earthquake scenario(s) contributing to hazard. An ensemble of time series can be selected on the basis of the modal earthquakes derived from the disaggregation. This gives a useful time-domain realization of the seismic hazard, to the extent that a single motion parameter captures the important time-domain characteristics. A possible limitation to this approach arises because most currently available motion prediction models for peak ground motion or oscillator response are essentially independent of duration, and modal events derived using the peak motions for the analysis may not represent the optimal characterization of the hazard. The elastic input energy spectrum is an alternative to the elastic response spectrum for these types of analyses. The input energy combines the elements of amplitude and duration into a single parameter description of the ground motion that can be readily incorporated into standard probabilistic seismic hazard analysis methodology. This use of the elastic input energy spectrum is examined. Regression analysis is performed using strong motion data from Western North America and consistent data processing procedures for both the absolute input energy equivalent velocity, (Vsbea), and the elastic pseudo-relative velocity response (PSV) in the frequency range 0.5 to 10 Hz. The results show that the two parameters can be successfully fit with identical functional forms. The dependence of Vsbea and PSV upon (NEHRP) site classification is virtually identical. The variance of Vsbea is uniformly less than that of PSV, indicating that Vsbea can be predicted with slightly less uncertainty as a function of magnitude, distance and site classification. The effects of site class are important at frequencies less than a few Hertz. The regression modeling does not resolve significant effects due to site class at frequencies greater than approximately 5 Hz. Disaggregation of general seismic hazard models using Vsbea indicates that the modal magnitudes for the higher frequency oscillators tend to be larger, and vary less with oscillator frequency, than those derived using PSV. Insofar as the elastic input energy may be a better parameter for quantifying the damage potential of ground motion, its use in probabilistic seismic hazard analysis could provide an improved means for selecting earthquake scenarios and establishing design earthquakes for many types of engineering analyses.

Rockslide susceptibility and hazard assessment for mitigation works design along vertical rocky cliffs: workflow proposal based on a real case-study conducted in Sacco (Campania), Italy

NASA Astrophysics Data System (ADS)

Pignalosa, Antonio; Di Crescenzo, Giuseppe; Marino, Ermanno; Terracciano, Rosario; Santo, Antonio

2015-04-01

The work here presented concerns a case study in which a complete multidisciplinary workflow has been applied for an extensive assessment of the rockslide susceptibility and hazard in a common scenario such as a vertical and fractured rocky cliffs. The studied area is located in a high-relief zone in Southern Italy (Sacco, Salerno, Campania), characterized by wide vertical rocky cliffs formed by tectonized thick successions of shallow-water limestones. The study concerned the following phases: a) topographic surveying integrating of 3d laser scanning, photogrammetry and GNSS; b) gelogical surveying, characterization of single instabilities and geomecanichal surveying, conducted by geologists rock climbers; c) processing of 3d data and reconstruction of high resolution geometrical models; d) structural and geomechanical analyses; e) data filing in a GIS-based spatial database; f) geo-statistical and spatial analyses and mapping of the whole set of data; g) 3D rockfall analysis; The main goals of the study have been a) to set-up an investigation method to achieve a complete and thorough characterization of the slope stability conditions and b) to provide a detailed base for an accurate definition of the reinforcement and mitigation systems. For this purposes the most up-to-date methods of field surveying, remote sensing, 3d modelling and geospatial data analysis have been integrated in a systematic workflow, accounting of the economic sustainability of the whole project. A novel integrated approach have been applied both fusing deterministic and statistical surveying methods. This approach enabled to deal with the wide extension of the studied area (near to 200.000 m2), without compromising an high accuracy of the results. The deterministic phase, based on a field characterization of single instabilities and their further analyses on 3d models, has been applied for delineating the peculiarity of each single feature. The statistical approach, based on geostructural field mapping and on punctual geomechanical data from scan-line surveying, allowed the rock mass partitioning in homogeneous geomechanical sectors and data interpolation through bounded geostatistical analyses on 3d models. All data, resulting from both approaches, have been referenced and filed in a single spatial database and considered in global geo-statistical analyses for deriving a fully modelled and comprehensive evaluation of the rockslide susceptibility. The described workflow yielded the following innovative results: a) a detailed census of single potential instabilities, through a spatial database recording the geometrical, geological and mechanical features, along with the expected failure modes; b) an high resolution characterization of the whole slope rockslide susceptibility, based on the partitioning of the area according to the stability and mechanical conditions which can be directly related to specific hazard mitigation systems; c) the exact extension of the area exposed to the rockslide hazard, along with the dynamic parameters of expected phenomena; d) an intervention design for hazard mitigation.

Conceptualizing community resilience to natural hazards - the emBRACE framework

NASA Astrophysics Data System (ADS)

Kruse, Sylvia; Abeling, Thomas; Deeming, Hugh; Fordham, Maureen; Forrester, John; Jülich, Sebastian; Nuray Karanci, A.; Kuhlicke, Christian; Pelling, Mark; Pedoth, Lydia; Schneiderbauer, Stefan

2017-12-01

The level of community is considered to be vital for building disaster resilience. Yet, community resilience as a scientific concept often remains vaguely defined and lacks the guiding characteristics necessary for analysing and enhancing resilience on the ground. The emBRACE framework of community resilience presented in this paper provides a heuristic analytical tool for understanding, explaining and measuring community resilience to natural hazards. It was developed in an iterative process building on existing scholarly debates, on empirical case study work in five countries and on participatory consultation with community stakeholders where the framework was applied and ground-tested in different contexts and for different hazard types. The framework conceptualizes resilience across three core domains: (i) resources and capacities, (ii) actions and (iii) learning. These three domains are conceptualized as intrinsically conjoined within a whole. Community resilience is influenced by these integral elements as well as by extra-community forces comprising disaster risk governance and thus laws, policies and responsibilities on the one hand and on the other, the general societal context, natural and human-made disturbances and system change over time. The framework is a graphically rendered heuristic, which through application can assist in guiding the assessment of community resilience in a systematic way and identifying key drivers and barriers of resilience that affect any particular hazard-exposed community.

Development of risk-based nanomaterial groups for occupational exposure control

NASA Astrophysics Data System (ADS)

Kuempel, E. D.; Castranova, V.; Geraci, C. L.; Schulte, P. A.

2012-09-01

Given the almost limitless variety of nanomaterials, it will be virtually impossible to assess the possible occupational health hazard of each nanomaterial individually. The development of science-based hazard and risk categories for nanomaterials is needed for decision-making about exposure control practices in the workplace. A possible strategy would be to select representative (benchmark) materials from various mode of action (MOA) classes, evaluate the hazard and develop risk estimates, and then apply a systematic comparison of new nanomaterials with the benchmark materials in the same MOA class. Poorly soluble particles are used here as an example to illustrate quantitative risk assessment methods for possible benchmark particles and occupational exposure control groups, given mode of action and relative toxicity. Linking such benchmark particles to specific exposure control bands would facilitate the translation of health hazard and quantitative risk information to the development of effective exposure control practices in the workplace. A key challenge is obtaining sufficient dose-response data, based on standard testing, to systematically evaluate the nanomaterials' physical-chemical factors influencing their biological activity. Categorization processes involve both science-based analyses and default assumptions in the absence of substance-specific information. Utilizing data and information from related materials may facilitate initial determinations of exposure control systems for nanomaterials.

The verification of hazardous ingredients disclosures in selected material safety data sheets.

PubMed

Welsh, M S; Lamesse, M; Karpinski, E

2000-05-01

Under the provisions of the Workplace Hazardous Materials Information System, workers in Canada must be provided with accurate and comprehensive Material Safety Data Sheets (MSDSs) describing controlled products used in the workplace. As part of an ongoing auditing project, the MSDSs of some controlled products in use under federal jurisdiction were assessed for accuracy and completeness of their ingredient disclosures. Chemical analyses of samples using gas chromatography-mass spectrometry, infrared spectrophotometry, X-ray fluorescence, and wet methods, were performed to verify the ingredient disclosures in accompanying MSDSs. In this article, analytical processes and results are presented for three cases in which MSDS ingredient disclosures were incomplete. The products included a synthetic lubricant used in a mining operation, a detergent concentrate used for aircraft cleaning, and an epoxy reducer used in aircraft maintenance. In each case, undisclosed hazardous ingredients were detected at concentrations which required their disclosure. In at least one of these cases, the information provided in other sections of the MSDS failed to adequately describe the hazards and required protective measures for the composition discovered. Because the results suggest circumstances in which the inaccurate MSDS could act as a mechanism for workplace injury, compliance measures including employer, inspector, and user education, improved MSDS writer qualifications, and the incorporation of chemical analysis in active auditing programs are recommended.

Integrating population dynamics into mapping human exposure to seismic hazard

NASA Astrophysics Data System (ADS)

Freire, S.; Aubrecht, C.

2012-11-01

Disaster risk is not fully characterized without taking into account vulnerability and population exposure. Assessment of earthquake risk in urban areas would benefit from considering the variation of population distribution at more detailed spatial and temporal scales, and from a more explicit integration of this improved demographic data with existing seismic hazard maps. In the present work, "intelligent" dasymetric mapping is used to model population dynamics at high spatial resolution in order to benefit the analysis of spatio-temporal exposure to earthquake hazard in a metropolitan area. These night- and daytime-specific population densities are then classified and combined with seismic intensity levels to derive new spatially-explicit four-class-composite maps of human exposure. The presented approach enables a more thorough assessment of population exposure to earthquake hazard. Results show that there are significantly more people potentially at risk in the daytime period, demonstrating the shifting nature of population exposure in the daily cycle and the need to move beyond conventional residence-based demographic data sources to improve risk analyses. The proposed fine-scale maps of human exposure to seismic intensity are mainly aimed at benefiting visualization and communication of earthquake risk, but can be valuable in all phases of the disaster management process where knowledge of population densities is relevant for decision-making.

Acceptability of screening for early detection of liver disease in hazardous/harmful drinkers in primary care.

PubMed

Eyles, Caroline; Moore, Michael; Sheron, Nicholas; Roderick, Paul; O'Brien, Wendy; Leydon, Geraldine M

2013-08-01

It is estimated that one-quarter of adults in the UK drink at harmful/hazardous levels leading to increased mortality and alcohol liver disease (ALD). The Alcohol Liver Disease Detection Study (ALDDeS) aimed to test out in primary care the feasibility of alcohol misuse screening in adults, using the AUDIT questionnaire, and to assess screening harmful/hazardous alcohol users for ALD using newer non-invasive serum markers of fibrosis. To explore patients' experiences of taking part in ALDDeS and understanding of the delivery and process of screening for ALD using self-report questionnaires and feedback of liver fibrosis risk using levels of non-invasive serum markers. A nested qualitative study based in five primary care practices in the UK. From a sample of patients who were identified as drinking at harmful/hazardous levels, 30 participants were identified by maximum variation sampling for qualitative in-depth interviews. Using the principles of constant comparison the transcribed interviews were thematically analysed. Receiving a postal AUDIT questionnaire was viewed as acceptable by participants. For some completing the AUDIT increased awareness of their hazardous alcohol use and a positive blood test indicating liver fibrosis was a catalyst for behaviour change. For others, a negative blood test result provided a licence to continue drinking at hazardous levels. A limited understanding of safe drinking and of ALD was common. Educational and training needs of primary care professionals must be taken into account, so that patients with marker levels indicating low risk of fibrosis are correctly informed about the likely risks of continuing to drink at the same levels.

Database management systems for process safety.

PubMed

Early, William F

2006-03-17

Several elements of the process safety management regulation (PSM) require tracking and documentation of actions; process hazard analyses, management of change, process safety information, operating procedures, training, contractor safety programs, pre-startup safety reviews, incident investigations, emergency planning, and compliance audits. These elements can result in hundreds of actions annually that require actions. This tracking and documentation commonly is a failing identified in compliance audits, and is difficult to manage through action lists, spreadsheets, or other tools that are comfortably manipulated by plant personnel. This paper discusses the recent implementation of a database management system at a chemical plant and chronicles the improvements accomplished through the introduction of a customized system. The system as implemented modeled the normal plant workflows, and provided simple, recognizable user interfaces for ease of use.

Phytoremediation of Hazardous Wastes

DTIC Science & Technology

1995-07-26

TITLE AND SUBTITLE Phytoremediation of Hazardous Wastes 6. AUTHOR(S) Steven C. McCutcheon, N. Lee Wolfe, Laura H. Carreria and Tse-Yuan Ou 5... phytoremediation (the use of plants to degrade hazardous contaminants) was developed. The new approach to phytoremediation involves rigorous pathway analyses...SUBJECT TERMS phytoremediation , nitroreductase, laccase enzymes, SERDP 15. NUMBER OF PAGES 8 16. PRICE CODE N/A 17. SECURITY CLASSIFICATION OF

Optimizing the Design of Preprinted Orders for Ambulatory Chemotherapy: Combining Oncology, Human Factors, and Graphic Design

PubMed Central

Jeon, Jennifer; White, Rachel E.; Hunt, Richard G.; Cassano-Piché, Andrea L.; Easty, Anthony C.

2012-01-01

Purpose: To establish a set of guidelines for developing ambulatory chemotherapy preprinted orders. Methods: Multiple methods were used to develop the preprinted order guidelines. These included (A) a comprehensive literature review and an environmental scan; (B) analyses of field study observations and incident reports; (C) critical review of evidence from the literature and the field study observation analyses; (D) review of the draft guidelines by a clinical advisory group; and (E) collaboration with graphic designers to develop sample preprinted orders, refine the design guidelines, and format the resulting content. Results: The Guidelines for Developing Ambulatory Chemotherapy Preprinted Orders, which consist of guidance on the design process, content, and graphic design elements of ambulatory chemotherapy preprinted orders, have been established. Conclusion: Health care is a safety critical, dynamic, and complex sociotechnical system. Identifying safety risks in such a system and effectively addressing them often require the expertise of multiple disciplines. This study illustrates how human factors professionals, clinicians, and designers can leverage each other's expertise to uncover commonly overlooked patient safety hazards and to provide health care professionals with innovative, practical, and user-centered tools to minimize those hazards. PMID:23077436

Optimizing the design of preprinted orders for ambulatory chemotherapy: combining oncology, human factors, and graphic design.

PubMed

Jeon, Jennifer; White, Rachel E; Hunt, Richard G; Cassano-Piché, Andrea L; Easty, Anthony C

2012-03-01

To establish a set of guidelines for developing ambulatory chemotherapy preprinted orders. Multiple methods were used to develop the preprinted order guidelines. These included (A) a comprehensive literature review and an environmental scan; (B) analyses of field study observations and incident reports; (C) critical review of evidence from the literature and the field study observation analyses; (D) review of the draft guidelines by a clinical advisory group; and (E) collaboration with graphic designers to develop sample preprinted orders, refine the design guidelines, and format the resulting content. The Guidelines for Developing Ambulatory Chemotherapy Preprinted Orders, which consist of guidance on the design process, content, and graphic design elements of ambulatory chemotherapy preprinted orders, have been established. Health care is a safety critical, dynamic, and complex sociotechnical system. Identifying safety risks in such a system and effectively addressing them often require the expertise of multiple disciplines. This study illustrates how human factors professionals, clinicians, and designers can leverage each other's expertise to uncover commonly overlooked patient safety hazards and to provide health care professionals with innovative, practical, and user-centered tools to minimize those hazards.

Physically and psychologically hazardous jobs and mental health in Thailand.

PubMed

Yiengprugsawan, Vasoontara; Strazdins, Lyndall; Lim, Lynette L-Y; Kelly, Matthew; Seubsman, Sam-ang; Sleigh, Adrian C

2015-09-01

This paper investigates associations between hazardous jobs, mental health and wellbeing among Thai adults. In 2005, 87 134 distance-learning students from Sukhothai Thammathirat Open University completed a self-administered questionnaire; at the 2009 follow-up 60 569 again participated. Job characteristics were reported in 2005, psychological distress and life satisfaction were reported in both 2005 and 2009. We derived two composite variables grading psychologically and physically hazardous jobs and reported adjusted odds ratios (AOR) from multivariate logistic regressions. Analyses focused on cohort members in paid work: the total was 62 332 at 2005 baseline and 41 671 at 2009 follow-up. Cross-sectional AORs linking psychologically hazardous jobs to psychological distress ranged from 1.52 (one hazard) to 4.48 (four hazards) for males and a corresponding 1.34-3.76 for females. Similarly AORs for physically hazardous jobs were 1.75 (one hazard) to 2.76 (four or more hazards) for males and 1.70-3.19 for females. A similar magnitude of associations was found between psychologically adverse jobs and low life satisfaction (AORs of 1.34-4.34 among males and 1.18-3.63 among females). Longitudinal analyses confirm these cross-sectional relationships. Thus, significant dose-response associations were found linking hazardous job exposures in 2005 to mental health and wellbeing in 2009. The health impacts of psychologically and physically hazardous jobs in developed, Western countries are equally evident in transitioning Southeast Asian countries such as Thailand. Regulation and monitoring of work conditions will become increasingly important to the health and wellbeing of the Thai workforce. © The Author 2013. Published by Oxford University Press.

Historical Relationship Between Performance Assessment for Radioactive Waste Disposal and Other Types of Risk Assessment in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

RECHARD,ROBERT P.

This paper describes the evolution of the process for assessing the hazards of a geologic disposal system for radioactive waste and, similarly, nuclear power reactors, and the relationship of this process with other assessments of risk, particularly assessments of hazards from manufactured carcinogenic chemicals during use and disposal. This perspective reviews the common history of scientific concepts for risk assessment developed to the 1950s. Computational tools and techniques developed in the late 1950s and early 1960s to analyze the reliability of nuclear weapon delivery systems were adopted in the early 1970s for probabilistic risk assessment of nuclear power reactors, amore » technology for which behavior was unknown. In turn, these analyses became an important foundation for performance assessment of nuclear waste disposal in the late 1970s. The evaluation of risk to human health and the environment from chemical hazards is built upon methods for assessing the dose response of radionuclides in the 1950s. Despite a shared background, however, societal events, often in the form of legislation, have affected the development path for risk assessment for human health, producing dissimilarities between these risk assessments and those for nuclear facilities. An important difference is the regulator's interest in accounting for uncertainty and the tools used to evaluate it.« less

Lidar-Based Navigation Algorithm for Safe Lunar Landing

NASA Technical Reports Server (NTRS)

Myers, David M.; Johnson, Andrew E.; Werner, Robert A.

2011-01-01

The purpose of Hazard Relative Navigation (HRN) is to provide measurements to the Navigation Filter so that it can limit errors on the position estimate after hazards have been detected. The hazards are detected by processing a hazard digital elevation map (HDEM). The HRN process takes lidar images as the spacecraft descends to the surface and matches these to the HDEM to compute relative position measurements. Since the HDEM has the hazards embedded in it, the position measurements are relative to the hazards, hence the name Hazard Relative Navigation.

An Online Resource for Flight Test Safety Planning

NASA Technical Reports Server (NTRS)

Lewis, Greg

2007-01-01

A viewgraph presentation describing an online database for flight test safety techniques is shown. The topics include: 1) Goal; 2) Test Hazard Analyses; 3) Online Database Background; 4) Data Gathering; 5) NTPS Role; 6) Organizations; 7) Hazard Titles; 8) FAR Paragraphs; 9) Maneuver Name; 10) Identified Hazard; 11) Matured Hazard Titles; 12) Loss of Control Causes; 13) Mitigations; 14) Database Now Open to the Public; 15) FAR Reference Search; 16) Record Field Search; 17) Keyword Search; and 18) Results of FAR Reference Search.

New lakes in deglaciating high-mountain areas: Regional intercomparison of current and future risks from impact waves due to rock/ice avalanches in the Swiss Alps

NASA Astrophysics Data System (ADS)

Schaub, Y.; Huggel, C.; Serraino, M.; Haeberli, W.

2012-04-01

The changes in high-mountain environments are increasingly fast and complex. GIS-based models of the Swiss Alps show that numerous topographic overdeepenings are likely to appear on progressively exposed glacier beds, which are considered as potential sites of future lake formation. In many cases these newly forming lakes will be situated in an over-steepened and destabilized high-mountain environment and are, therefore, prone to impact waves from landslides. The risk of glacier lake outburst floods, endangering infrastructure, residential areas and persons further downvalley, is increasing with further lake formation and glacier recession. This risk may persist for many decades if not centuries. Future-oriented hazard assessments have to be integrative and must deal with all possible process chains. Reference studies and methodologies are still scarce, however. We present an approach to compare risks resulting from high-mountain lakes in the Swiss Alps amongst each other. Already existing lakes are thereby as much included in the analysis as future ones. The presented risk assessment approach integrates the envisaged high-mountain hazard process chain with present and future socio-economic conditions. Applying the concept of integral risk management, the hazard and damage potentials have to be analyzed. The areas that feature the topographic potential for rock/iceavalanches to reach a lake were analyzed regarding their susceptibility to slope failure including the factors slope inclination, permafrost occurrence, glacier recession and bedrock lithology. Together with the analysis of the lakes (volume and runout path of potential outburst floods), the hazard analysis of the process chain was completed. As an example, high long-term hazard potentials in the Swiss Alps have, for instance, to be expected in the area of the Great Aletsch glacier. A methodology for the assessment of the damage potential was elaborated and will be presented. In order to estimate the location of the largest damage potentials, driving forces of different spatial development scenarios for the Swiss Alps will be implemented in a land allocation model for the Swiss Alps. By bringing together hazard, exposure and vulnerability analyses, a risk assessment for the entire Swiss Alps regarding lake-outburst floods triggered by impacts of rock/ice avalanches can be conducted for today, the middle of the century and even beyond.

Consolidation process for producing ceramic waste forms

DOEpatents

Hash, Harry C.; Hash, Mark C.

2000-01-01

A process for the consolidation and containment of solid or semisolid hazardous waste, which process comprises closing an end of a circular hollow cylinder, filling the cylinder with the hazardous waste, and then cold working the cylinder to reduce its diameter while simultaneously compacting the waste. The open end of the cylinder can be sealed prior to or after the cold working process. The preferred method of cold working is to draw the sealed cylinder containing the hazardous waste through a plurality of dies to simultaneously reduce the diameter of the tube while compacting the waste. This process provides a quick continuous process for consolidating hazardous waste, including radioactive waste.

A Guidance Manual: Waste Analysis at Facilities that Generate, Treat, Store, and Dispose of Hazardous Wastes

EPA Pesticide Factsheets

Discusses how a person can perform waste analyses and develop waste analysis plans (WAPs) in accordance with the federal hazardous waste regulations of the Resource Conservation and Recovery Act (RCRA)

An empirical comparison of statistical tests for assessing the proportional hazards assumption of Cox's model.

PubMed

Ng'andu, N H

1997-03-30

In the analysis of survival data using the Cox proportional hazard (PH) model, it is important to verify that the explanatory variables analysed satisfy the proportional hazard assumption of the model. This paper presents results of a simulation study that compares five test statistics to check the proportional hazard assumption of Cox's model. The test statistics were evaluated under proportional hazards and the following types of departures from the proportional hazard assumption: increasing relative hazards; decreasing relative hazards; crossing hazards; diverging hazards, and non-monotonic hazards. The test statistics compared include those based on partitioning of failure time and those that do not require partitioning of failure time. The simulation results demonstrate that the time-dependent covariate test, the weighted residuals score test and the linear correlation test have equally good power for detection of non-proportionality in the varieties of non-proportional hazards studied. Using illustrative data from the literature, these test statistics performed similarly.

The Effect of Power Protection Equipment on Explosion Hazards and on the Reliability of Power Supply to Longwall Systems

NASA Astrophysics Data System (ADS)

Boron, Sergiusz

2017-06-01

Operational safety of electrical machines and equipment depends, inter alia, on the hazards resulting from their use and on the scope of applied protective measures. The use of insufficient protection against existing hazards leads to reduced operational safety, particularly under fault conditions. On the other hand, excessive (in relation to existing hazards) level of protection may compromise the reliability of power supply. This paper analyses the explosion hazard created by earth faults in longwall power supply systems and evaluates existing protection equipment from the viewpoint of its protective performance, particularly in the context of explosion hazards, and also assesses its effect on the reliability of power supply.

Traffic crash involvement: experiential driving knowledge and stressful contextual antecedents.

PubMed

Legree, Peter J; Heffner, Tonia S; Psotka, Joseph; Martin, Daniel E; Medsker, Gina J

2003-02-01

Researchers have rarely examined stressful environments and psychological characteristics as predictors of driving behavior in the same study. The authors hypothesized that (a) safer drivers more accurately assess physical and emotional traffic hazards and (b) stress and emotional states elevate crash risk. The hypotheses were evaluated with procedural and declarative tacit driving knowledge tests requiring assessment of emotional and contextual hazards and with accident reports describing crash antecedents, including stressful events and environmental conditions. Analyses identified separate driving knowledge factors corresponding to emotional and contextual hazards that were significantly related to the crash criteria. Accident report analyses show that stress significantly elevates at-fault crash risk. The results demonstrate the importance of experiential knowledge acquired without instruction (procedural or tacit knowledge) and provide safety recommendations.

Clandestine laboratory scene investigation and processing using portable GC/MS

NASA Astrophysics Data System (ADS)

Matejczyk, Raymond J.

1997-02-01

This presentation describes the use of portable gas chromatography/mass spectrometry for on-scene investigation and processing of clandestine laboratories. Clandestine laboratory investigations present special problems to forensic investigators. These crime scenes contain many chemical hazards that must be detected, identified and collected as evidence. Gas chromatography/mass spectrometry performed on-scene with a rugged, portable unit is capable of analyzing a variety of matrices for drugs and chemicals used in the manufacture of illicit drugs, such as methamphetamine. Technologies used to detect various materials at a scene have particular applications but do not address the wide range of samples, chemicals, matrices and mixtures that exist in clan labs. Typical analyses performed by GC/MS are for the purpose of positively establishing the identity of starting materials, chemicals and end-product collected from clandestine laboratories. Concerns for the public and investigator safety and the environment are also important factors for rapid on-scene data generation. Here is described the implementation of a portable multiple-inlet GC/MS system designed for rapid deployment to a scene to perform forensic investigations of clandestine drug manufacturing laboratories. GC/MS has long been held as the 'gold standard' in performing forensic chemical analyses. With the capability of GC/MS to separate and produce a 'chemical fingerprint' of compounds, it is utilized as an essential technique for detecting and positively identifying chemical evidence. Rapid and conclusive on-scene analysis of evidence will assist the forensic investigators in collecting only pertinent evidence thereby reducing the amount of evidence to be transported, reducing chain of custody concerns, reducing costs and hazards, maintaining sample integrity and speeding the completion of the investigative process.

SU-F-T-246: Evaluation of Healthcare Failure Mode And Effect Analysis For Risk Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harry, T; University of California, San Diego, La Jolla, CA; Manger, R

Purpose: To evaluate the differences between the Veteran Affairs Healthcare Failure Modes and Effect Analysis (HFMEA) and the AAPM Task Group 100 Failure and Effect Analysis (FMEA) risk assessment techniques in the setting of a stereotactic radiosurgery (SRS) procedure were compared respectively. Understanding the differences in the techniques methodologies and outcomes will provide further insight into the applicability and utility of risk assessments exercises in radiation therapy. Methods: HFMEA risk assessment analysis was performed on a stereotactic radiosurgery procedure. A previous study from our institution completed a FMEA of our SRS procedure and the process map generated from this workmore » was used for the HFMEA. The process of performing the HFMEA scoring was analyzed, and the results from both analyses were compared. Results: The key differences between the two risk assessments are the scoring criteria for failure modes and identifying critical failure modes for potential hazards. The general consensus among the team performing the analyses was that scoring for the HFMEA was simpler and more intuitive then the FMEA. The FMEA identified 25 critical failure modes while the HFMEA identified 39. Seven of the FMEA critical failure modes were not identified by the HFMEA and 21 of the HFMEA critical failure modes were not identified by the FMEA. HFMEA as described by the Veteran Affairs provides guidelines on which failure modes to address first. Conclusion: HFMEA is a more efficient model for identifying gross risks in a process than FMEA. Clinics with minimal staff, time and resources can benefit from this type of risk assessment to eliminate or mitigate high risk hazards with nominal effort. FMEA can provide more in depth details but at the cost of elevated effort.« less

230Th/U ages Supporting Hanford Site-Wide Probabilistic Seismic Hazard Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paces, James B.

This product represents a USGS Administrative Report that discusses samples and methods used to conduct uranium-series isotope analyses and resulting ages and initial 234U/238U activity ratios of pedogenic cements developed in several different surfaces in the Hanford area middle to late Pleistocene. Samples were collected and dated to provide calibration of soil development in surface deposits that are being used in the Hanford Site-Wide probabilistic seismic hazard analysis conducted by AMEC. The report includes description of sample locations and physical characteristics, sample preparation, chemical processing and mass spectrometry, analytical results, and calculated ages for individual sites. Ages of innermost rindsmore » on a number of samples from five sites in eastern Washington are consistent with a range of minimum depositional ages from 17 ka for cataclysmic flood deposits to greater than 500 ka for alluvium at several sites.« less

230Th/U ages Supporting Hanford Site‐Wide Probabilistic Seismic Hazard Analysis

USGS Publications Warehouse

Paces, James B.

2014-01-01

This product represents a USGS Administrative Report that discusses samples and methods used to conduct uranium-series isotope analyses and resulting ages and initial 234U/238U activity ratios of pedogenic cements developed in several different surfaces in the Hanford area middle to late Pleistocene. Samples were collected and dated to provide calibration of soil development in surface deposits that are being used in the Hanford Site-Wide probabilistic seismic hazard analysis conducted by AMEC. The report includes description of sample locations and physical characteristics, sample preparation, chemical processing and mass spectrometry, analytical results, and calculated ages for individual sites. Ages of innermost rinds on a number of samples from five sites in eastern Washington are consistent with a range of minimum depositional ages from 17 ka for cataclysmic flood deposits to greater than 500 ka for alluvium at several sites.

Probabilistic Survivability Versus Time Modeling

NASA Technical Reports Server (NTRS)

Joyner, James J., Sr.

2016-01-01

This presentation documents Kennedy Space Center's Independent Assessment work completed on three assessments for the Ground Systems Development and Operations (GSDO) Program to assist the Chief Safety and Mission Assurance Officer during key programmatic reviews and provided the GSDO Program with analyses of how egress time affects the likelihood of astronaut and ground worker survival during an emergency. For each assessment, a team developed probability distributions for hazard scenarios to address statistical uncertainty, resulting in survivability plots over time. The first assessment developed a mathematical model of probabilistic survivability versus time to reach a safe location using an ideal Emergency Egress System at Launch Complex 39B (LC-39B); the second used the first model to evaluate and compare various egress systems under consideration at LC-39B. The third used a modified LC-39B model to determine if a specific hazard decreased survivability more rapidly than other events during flight hardware processing in Kennedy's Vehicle Assembly Building.

Use of the quality management system “JACIE” and outcome after hematopoietic stem cell transplantation

PubMed Central

Gratwohl, Alois; Brand, Ronald; McGrath, Eoin; van Biezen, Anja; Sureda, Anna; Ljungman, Per; Baldomero, Helen; Chabannon, Christian; Apperley, Jane

2014-01-01

Competent authorities, healthcare payers and hospitals devote increasing resources to quality management systems but scientific analyses searching for an impact of these systems on clinical outcome remain scarce. Earlier data indicated a stepwise improvement in outcome after allogeneic hematopoietic stem cell transplantation with each phase of the accreditation process for the quality management system “JACIE”. We therefore tested the hypothesis that working towards and achieving “JACIE” accreditation would accelerate improvement in outcome over calendar time. Overall mortality of the entire cohort of 107,904 patients who had a transplant (41,623 allogeneic, 39%; 66,281 autologous, 61%) between 1999 and 2006 decreased over the 14-year observation period by a factor of 0.63 per 10 years (hazard ratio: 0.63; 0.58–0.69). Considering “JACIE“-accredited centers as those with programs having achieved accreditation by November 2012, at the latest, this improvement was significantly faster in “JACIE”-accredited centers than in non-accredited centers (approximately 5.3% per year for 49,459 patients versus approximately 3.5% per year for 58,445 patients, respectively; hazard ratio: 0.83; 0.71–0.97). As a result, relapse-free survival (hazard ratio 0.85; 0.75–0.95) and overall survival (hazard ratio 0.86; 0.76–0.98) were significantly higher at 72 months for those patients transplanted in the 162 “JACIE“-accredited centers. No significant effects were observed after autologous transplants (hazard ratio 1.06; 0.99–1.13). Hence, working towards implementation of a quality management system triggers a dynamic process associated with a steeper reduction in mortality over the years and a significantly improved survival after allogeneic stem cell transplantation. Our data support the use of a quality management system for complex medical procedures. PMID:24488562

Probabilistic tsunami hazard analysis: Multiple sources and global applications

USGS Publications Warehouse

Grezio, Anita; Babeyko, Andrey; Baptista, Maria Ana; Behrens, Jörn; Costa, Antonio; Davies, Gareth; Geist, Eric L.; Glimsdal, Sylfest; González, Frank I.; Griffin, Jonathan; Harbitz, Carl B.; LeVeque, Randall J.; Lorito, Stefano; Løvholt, Finn; Omira, Rachid; Mueller, Christof; Paris, Raphaël; Parsons, Thomas E.; Polet, Jascha; Power, William; Selva, Jacopo; Sørensen, Mathilde B.; Thio, Hong Kie

2017-01-01

Applying probabilistic methods to infrequent but devastating natural events is intrinsically challenging. For tsunami analyses, a suite of geophysical assessments should be in principle evaluated because of the different causes generating tsunamis (earthquakes, landslides, volcanic activity, meteorological events, and asteroid impacts) with varying mean recurrence rates. Probabilistic Tsunami Hazard Analyses (PTHAs) are conducted in different areas of the world at global, regional, and local scales with the aim of understanding tsunami hazard to inform tsunami risk reduction activities. PTHAs enhance knowledge of the potential tsunamigenic threat by estimating the probability of exceeding specific levels of tsunami intensity metrics (e.g., run-up or maximum inundation heights) within a certain period of time (exposure time) at given locations (target sites); these estimates can be summarized in hazard maps or hazard curves. This discussion presents a broad overview of PTHA, including (i) sources and mechanisms of tsunami generation, emphasizing the variety and complexity of the tsunami sources and their generation mechanisms, (ii) developments in modeling the propagation and impact of tsunami waves, and (iii) statistical procedures for tsunami hazard estimates that include the associated epistemic and aleatoric uncertainties. Key elements in understanding the potential tsunami hazard are discussed, in light of the rapid development of PTHA methods during the last decade and the globally distributed applications, including the importance of considering multiple sources, their relative intensities, probabilities of occurrence, and uncertainties in an integrated and consistent probabilistic framework.

Probabilistic Tsunami Hazard Analysis: Multiple Sources and Global Applications

NASA Astrophysics Data System (ADS)

Grezio, Anita; Babeyko, Andrey; Baptista, Maria Ana; Behrens, Jörn; Costa, Antonio; Davies, Gareth; Geist, Eric L.; Glimsdal, Sylfest; González, Frank I.; Griffin, Jonathan; Harbitz, Carl B.; LeVeque, Randall J.; Lorito, Stefano; Løvholt, Finn; Omira, Rachid; Mueller, Christof; Paris, Raphaël.; Parsons, Tom; Polet, Jascha; Power, William; Selva, Jacopo; Sørensen, Mathilde B.; Thio, Hong Kie

2017-12-01

Applying probabilistic methods to infrequent but devastating natural events is intrinsically challenging. For tsunami analyses, a suite of geophysical assessments should be in principle evaluated because of the different causes generating tsunamis (earthquakes, landslides, volcanic activity, meteorological events, and asteroid impacts) with varying mean recurrence rates. Probabilistic Tsunami Hazard Analyses (PTHAs) are conducted in different areas of the world at global, regional, and local scales with the aim of understanding tsunami hazard to inform tsunami risk reduction activities. PTHAs enhance knowledge of the potential tsunamigenic threat by estimating the probability of exceeding specific levels of tsunami intensity metrics (e.g., run-up or maximum inundation heights) within a certain period of time (exposure time) at given locations (target sites); these estimates can be summarized in hazard maps or hazard curves. This discussion presents a broad overview of PTHA, including (i) sources and mechanisms of tsunami generation, emphasizing the variety and complexity of the tsunami sources and their generation mechanisms, (ii) developments in modeling the propagation and impact of tsunami waves, and (iii) statistical procedures for tsunami hazard estimates that include the associated epistemic and aleatoric uncertainties. Key elements in understanding the potential tsunami hazard are discussed, in light of the rapid development of PTHA methods during the last decade and the globally distributed applications, including the importance of considering multiple sources, their relative intensities, probabilities of occurrence, and uncertainties in an integrated and consistent probabilistic framework.

The Hazard Analysis and Critical Control Points (HACCP) generic model for the production of Thai fermented pork sausage (Nham).

PubMed

Paukatong, K V; Kunawasen, S

2001-01-01

Nham is a traditional Thai fermented pork sausage. The major ingredients of Nham are ground pork meat and shredded pork rind. Nham has been reported to be contaminated with Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Therefore, it is a potential cause of foodborne diseases for consumers. A Hazard Analysis and Critical Control Points (HACCP) generic model has been developed for the Nham process. Nham processing plants were observed and a generic flow diagram of Nham processes was constructed. Hazard analysis was then conducted. Other than microbial hazards, the pathogens previously found in Nham, sodium nitrite and metal were identified as chemical and physical hazards in this product, respectively. Four steps in the Nham process have been identified as critical control points. These steps are the weighing of the nitrite compound, stuffing, fermentation, and labeling. The chemical hazard of nitrite must be controlled during the weighing step. The critical limit of nitrite levels in the Nham mixture has been set at 100-200 ppm. This level is high enough to control Clostridium botulinum but does not cause chemical hazards to the consumer. The physical hazard from metal clips could be prevented by visual inspection of every Nham product during stuffing. The microbiological hazard in Nham could be reduced in the fermentation process. The critical limit of the pH of Nham was set at lower than 4.6. Since this product is not cooked during processing, finally, educating the consumer, by providing information on the label such as "safe if cooked before consumption", could be an alternative way to prevent the microbiological hazards of this product.

Structural and seismic analyses of waste facility reinforced concrete storage vaults

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, C.Y.

1995-07-01

Facility 317 of Argonne National Laboratory consists of several reinforced concrete waste storage vaults designed and constructed in the late 1940`s through the early 1960`s. In this paper, structural analyses of these concrete vaults subjected to various natural hazards are described, emphasizing the northwest shallow vault. The natural phenomenon hazards considered include both earthquakes and tornados. Because these vaults are deeply embedded in the soil, the SASSI (System Analysis of Soil-Structure Interaction) code was utilized for the seismic calculations. The ultimate strength method was used to analyze the reinforced concrete structures. In all studies, moment and shear strengths at criticalmore » locations of the storage vaults were evaluated. Results of the structural analyses show that almost all the waste storage vaults meet the code requirements according to ACI 349--85. These vaults also satisfy the performance goal such that confinement of hazardous materials is maintained and functioning of the facility is not interrupted.« less

Regional coseismic landslide hazard assessment without historical landslide inventories: A new approach

NASA Astrophysics Data System (ADS)

Kritikos, Theodosios; Robinson, Tom R.; Davies, Tim R. H.

2015-04-01

Currently, regional coseismic landslide hazard analyses require comprehensive historical landslide inventories as well as detailed geotechnical data. Consequently, such analyses have not been possible where these data are not available. A new approach is proposed herein to assess coseismic landslide hazard at regional scale for specific earthquake scenarios in areas without historical landslide inventories. The proposed model employs fuzzy logic and geographic information systems to establish relationships between causative factors and coseismic slope failures in regions with well-documented and substantially complete coseismic landslide inventories. These relationships are then utilized to estimate the relative probability of landslide occurrence in regions with neither historical landslide inventories nor detailed geotechnical data. Statistical analyses of inventories from the 1994 Northridge and 2008 Wenchuan earthquakes reveal that shaking intensity, topography, and distance from active faults and streams are the main controls on the spatial distribution of coseismic landslides. Average fuzzy memberships for each factor are developed and aggregated to model the relative coseismic landslide hazard for both earthquakes. The predictive capabilities of the models are assessed and show good-to-excellent model performance for both events. These memberships are then applied to the 1999 Chi-Chi earthquake, using only a digital elevation model, active fault map, and isoseismal data, replicating prediction of a future event in a region lacking historic inventories and/or geotechnical data. This similarly results in excellent model performance, demonstrating the model's predictive potential and confirming it can be meaningfully applied in regions where previous methods could not. For such regions, this method may enable a greater ability to analyze coseismic landslide hazard from specific earthquake scenarios, allowing for mitigation measures and emergency response plans to be better informed of earthquake-related hazards.

Infusing Reliability Techniques into Software Safety Analysis

NASA Technical Reports Server (NTRS)

Shi, Ying

2015-01-01

Software safety analysis for a large software intensive system is always a challenge. Software safety practitioners need to ensure that software related hazards are completely identified, controlled, and tracked. This paper discusses in detail how to incorporate the traditional reliability techniques into the entire software safety analysis process. In addition, this paper addresses how information can be effectively shared between the various practitioners involved in the software safety analyses. The author has successfully applied the approach to several aerospace applications. Examples are provided to illustrate the key steps of the proposed approach.

Use of Bedrock and Geomorphic Mapping Compilations in Assessing Geologic Hazards at Recreation Sites on National Forests in NW California

NASA Astrophysics Data System (ADS)

de La Fuente, J. A.; Bell, A.; Elder, D.; Mowery, R.; Mikulovsky, R.; Klingel, H.; Stevens, M.

2010-12-01

Geologic hazards on US Forest Service lands have a long history of producing catastrophic events. In 1890 (prior to the establishment of the Forest Service), the China Mine landslide buried a miner’s camp along the Trinity River in NW California, killing a number of miners. An earthquake in southwestern Montana triggered a massive landslide which killed 28 people in a US Forest Service campground in 1959. In 1980, Mount St. Helens erupted in Oregon, killing 57 people. Debris flows from a winter storm in 2003 on the burned hillslopes of the San Bernardino National Forest in California killed 14 people at the St. Sophia youth Camp. A rockfall in the summer of 2009 in Lassen National Park killed a 9 year old boy. The most recent catastrophe occurred on June 11, 2010 when 20 people died in a flash flood at the Albert Pike Campground on the Ouachita National Forest. These and other disasters point out the need for geologic hazard mapping and assessments on the National Forests. The US Forest Service (USFS) is currently assessing geologic hazards in the Northern Province of USFS Region 5 (Pacific Southwest Region), which includes the Klamath, Mendocino, Shasta-Trinity, and Six Rivers National Forests. The most common geologic hazards (relatively short return intervals) in this area include landslides, rock falls, debris flows, flooding, temporary dam failures (landslide or woody debris), naturally occurring hazardous materials, (asbestos radon, etc), and rarely, karst subsidence. Seismic and volcanic hazards are also important at longer return intervals. This assessment will be conducted in three phases, and is patterned after a process developed by Region 8 of the US Forest Service. The first phase is a reconnaissance level assessment based on existing information such as spatial databases, aerial photos, Digital Elevation Models, State of California Alquist-Priolo Earthquake Fault Zone maps, previous investigations and anecdotal accounts of past events. The bedrock coverage is a compilation of the best available mapping for all National Forests in California. The geomorphic coverage includes features such as active and dormant landslides, alluvial fans, headwall basins, glacial features, and valley inner gorge. Criteria will be developed which utilize elements of this data to evaluate geologic hazards in the vicinity of developed recreation sites. The second phase will be conducted later and involves site specific analyses focusing on areas identified as higher hazard in the first phase, along with verification and updating of phase 1 findings. The third phase will complete any site level geologic or hydrologic investigations, and wrap up the hazard assessment process. A summary report with hazard maps and recommendations will be prepared at the end of each phase. The overriding goal of this project is to provide sound geologic information to managers so they can use a science-based approach in recognizing and managing geologic hazards at recreation sites.

Hazardous properties of paint residues from the furniture industry.

PubMed

Vaajasaari, Kati; Kulovaara, Maaret; Joutti, Anneli; Schultz, Eija; Soljamo, Kari

2004-01-30

The objective of this study was to screen nine excess paint residues for environmental hazard and to evaluate their disposability in a non-hazardous or hazardous-waste landfill. These residues were produced in the process of spray-painting furniture. Residues were classified according to their leaching and ecotoxicological properties. Leaching properties were determined with the European standard SFS-EN 12457-2 leaching-test. The toxicity of the leaching-test eluates was measured with plant-, bacteria- and enzyme-inhibition bioassays. Total organic carbon, formaldehyde and solvent concentrations in the solid wastes and in the leaching-test eluates were analysed. It seemed likely that leached formaldehyde caused very high acute toxicity in leaching-test eluates of the dry-booth residues. This hypothesis was based on the fact that the formaldehyde concentrations in the leaching-test eluates of the dry-booth residues were 62-75 times higher than the EC50 value reported in the literature for formaldehyde. The results of the water-curtain booth residues showed that the samples with the highest TOC and aromatic solvent concentrations were also the most toxic. The studied excess paint residues were complex organic mixtures and contained large amounts of compounds not identifiable from chemical data. Therefore, the evaluation of the hazard based solely on available chemical data is unlikely to be sufficient, as evidenced by our study. Our results show that harmful compounds remain in the solid waste and the toxicity results of their leaching-test eluates show that toxicity may leach from residues in contact with water at landfill sites. They also confirm the benefit of combining chemical and ecotoxicological assays in assessing the potential environmental hazard of complex organic mixtures found in wastes. Copyright 2003 Elsevier B.V.

Rockfall Hazard Process Assessment : Final Project Report

DOT National Transportation Integrated Search

2017-10-01

After a decade of using the Rockfall Hazard Rating System (RHRS), the Montana Department of Transportation (MDT) sought a reassessment of their rockfall hazard evaluation process. Their prior system was a slightly modified version of the RHRS and was...

Neurocognitive mechanisms underlying deceptive hazard evaluation: An event-related potentials investigation.

PubMed

Fu, Huijian; Qiu, Wenwei; Ma, Haiying; Ma, Qingguo

2017-01-01

Deceptive behavior is common in human social interactions. Researchers have been trying to uncover the cognitive process and neural basis underlying deception due to its theoretical and practical significance. We used Event-related potentials (ERPs) to investigate the neural correlates of deception when the participants completed a hazard judgment task. Pictures conveying or not conveying hazard information were presented to the participants who were then requested to discriminate the hazard content (safe or hazardous) and make a response corresponding to the cues (truthful or deceptive). Behavioral and electrophysiological data were recorded during the entire experiment. Results showed that deceptive responses, compared to truthful responses, were associated with longer reaction time (RT), lower accuracy, increased N2 and reduced late positive potential (LPP), suggesting a cognitively more demanding process to respond deceptively. The decrement in LPP correlated negatively with the increment in RT for deceptive relative to truthful responses, regardless of hazard content. In addition, hazardous information evoked larger N1 and P300 than safe information, reflecting an early processing bias and a later evaluative categorization process based on motivational significance, respectively. Finally, the interaction between honesty (truthful/deceptive) and safety (safe/hazardous) on accuracy and LPP indicated that deceptive responses towards safe information required more effort than deceptive responses towards hazardous information. Overall, these results demonstrate the neurocognitive substrates underlying deception about hazard information.

Neurocognitive mechanisms underlying deceptive hazard evaluation: An event-related potentials investigation

PubMed Central

Qiu, Wenwei; Ma, Haiying; Ma, Qingguo

2017-01-01

Deceptive behavior is common in human social interactions. Researchers have been trying to uncover the cognitive process and neural basis underlying deception due to its theoretical and practical significance. We used Event-related potentials (ERPs) to investigate the neural correlates of deception when the participants completed a hazard judgment task. Pictures conveying or not conveying hazard information were presented to the participants who were then requested to discriminate the hazard content (safe or hazardous) and make a response corresponding to the cues (truthful or deceptive). Behavioral and electrophysiological data were recorded during the entire experiment. Results showed that deceptive responses, compared to truthful responses, were associated with longer reaction time (RT), lower accuracy, increased N2 and reduced late positive potential (LPP), suggesting a cognitively more demanding process to respond deceptively. The decrement in LPP correlated negatively with the increment in RT for deceptive relative to truthful responses, regardless of hazard content. In addition, hazardous information evoked larger N1 and P300 than safe information, reflecting an early processing bias and a later evaluative categorization process based on motivational significance, respectively. Finally, the interaction between honesty (truthful/deceptive) and safety (safe/hazardous) on accuracy and LPP indicated that deceptive responses towards safe information required more effort than deceptive responses towards hazardous information. Overall, these results demonstrate the neurocognitive substrates underlying deception about hazard information. PMID:28793344

Probabilistic properties of injection induced seismicity - implications for the seismic hazard analysis

NASA Astrophysics Data System (ADS)

Lasocki, Stanislaw; Urban, Pawel; Kwiatek, Grzegorz; Martinez-Garzón, Particia

2017-04-01

Injection induced seismicity (IIS) is an undesired dynamic rockmass response to massive fluid injections. This includes reactions, among others, to hydro-fracturing for shale gas exploitation. Complexity and changeability of technological factors that induce IIS, may result in significant deviations of the observed distributions of seismic process parameters from the models, which perform well in natural, tectonic seismic processes. Classic formulations of probabilistic seismic hazard analysis in natural seismicity assume the seismic marked point process to be a stationary Poisson process, whose marks - magnitudes are governed by a Gutenberg-Richter born exponential distribution. It is well known that the use of an inappropriate earthquake occurrence model and/or an inappropriate of magnitude distribution model leads to significant systematic errors of hazard estimates. It is therefore of paramount importance to check whether the mentioned, commonly used in natural seismicity assumptions on the seismic process, can be safely used in IIS hazard problems or not. Seismicity accompanying shale gas operations is widely studied in the framework of the project "Shale Gas Exploration and Exploitation Induced Risks" (SHEER). Here we present results of SHEER project investigations of such seismicity from Oklahoma and of a proxy of such seismicity - IIS data from The Geysers geothermal field. We attempt to answer to the following questions: • Do IIS earthquakes follow the Gutenberg-Richter distribution law, so that the magnitude distribution can be modelled by an exponential distribution? • Is the occurrence process of IIS earthquakes Poissonian? Is it segmentally Poissonian? If yes, how are these segments linked to cycles of technological operations? Statistical tests indicate that the Gutenberg-Richter relation born exponential distribution model for magnitude is, in general, inappropriate. The magnitude distribution can be complex, multimodal, with no ready-to-use functional model. In this connection, we recommend to use in hazard analyses non-parametric, kernel estimators of magnitude distribution. The earthquake occurrence process of IIS is not a Poisson process. When earthquakes' occurrences are influenced by a multitude of inducing factors, the interevent time distribution can be modelled by the Weibull distribution supporting a negative ageing property of the process. When earthquake occurrences are due to a specific injection activity, the earthquake rate directly depends on the injection rate and responds immediately to the changes of the injection rate. Furthermore, this response is not limited only to correlated variations of the seismic activity but it also concerns significant changes of the shape of interevent time distribution. Unlike the event rate, the shape of magnitude distribution does not exhibit correlation with the injection rate. This work was supported within SHEER: "Shale Gas Exploration and Exploitation Induced Risks" project funded from Horizon 2020 - R&I Framework Programme, call H2020-LCE 16-2014-1 and within statutory activities No3841/E-41/S/2016 of Ministry of Science and Higher Education of Poland.

Processing capacity under perceptual and cognitive load: a closer look at load theory.

PubMed

Fitousi, Daniel; Wenger, Michael J

2011-06-01

Variations in perceptual and cognitive demands (load) play a major role in determining the efficiency of selective attention. According to load theory (Lavie, Hirst, Fockert, & Viding, 2004) these factors (a) improve or hamper selectivity by altering the way resources (e.g., processing capacity) are allocated, and (b) tap resources rather than data limitations (Norman & Bobrow, 1975). Here we provide an extensive and rigorous set of tests of these assumptions. Predictions regarding changes in processing capacity are tested using the hazard function of the response time (RT) distribution (Townsend & Ashby, 1978; Wenger & Gibson, 2004). The assumption that load taps resource rather than data limitations is examined using measures of sensitivity and bias drawn from signal detection theory (Swets, 1964). All analyses were performed at two levels: the individual and the aggregate. Hypotheses regarding changes in processing capacity were confirmed at the level of the aggregate. Hypotheses regarding resource and data limitations were not completely supported at either level of analysis. And in all of the analyses, we observed substantial individual differences. In sum, the results suggest a need to expand the theoretical vocabulary of load theory, rather than a need to discard it.

Integrated survival analysis using an event-time approach in a Bayesian framework

USGS Publications Warehouse

Walsh, Daniel P.; Dreitz, VJ; Heisey, Dennis M.

2015-01-01

Event-time or continuous-time statistical approaches have been applied throughout the biostatistical literature and have led to numerous scientific advances. However, these techniques have traditionally relied on knowing failure times. This has limited application of these analyses, particularly, within the ecological field where fates of marked animals may be unknown. To address these limitations, we developed an integrated approach within a Bayesian framework to estimate hazard rates in the face of unknown fates. We combine failure/survival times from individuals whose fates are known and times of which are interval-censored with information from those whose fates are unknown, and model the process of detecting animals with unknown fates. This provides the foundation for our integrated model and permits necessary parameter estimation. We provide the Bayesian model, its derivation, and use simulation techniques to investigate the properties and performance of our approach under several scenarios. Lastly, we apply our estimation technique using a piece-wise constant hazard function to investigate the effects of year, age, chick size and sex, sex of the tending adult, and nesting habitat on mortality hazard rates of the endangered mountain plover (Charadrius montanus) chicks. Traditional models were inappropriate for this analysis because fates of some individual chicks were unknown due to failed radio transmitters. Simulations revealed biases of posterior mean estimates were minimal (≤ 4.95%), and posterior distributions behaved as expected with RMSE of the estimates decreasing as sample sizes, detection probability, and survival increased. We determined mortality hazard rates for plover chicks were highest at <5 days old and were lower for chicks with larger birth weights and/or whose nest was within agricultural habitats. Based on its performance, our approach greatly expands the range of problems for which event-time analyses can be used by eliminating the need for having completely known fate data.

Integrated survival analysis using an event-time approach in a Bayesian framework.

PubMed

Walsh, Daniel P; Dreitz, Victoria J; Heisey, Dennis M

2015-02-01

Event-time or continuous-time statistical approaches have been applied throughout the biostatistical literature and have led to numerous scientific advances. However, these techniques have traditionally relied on knowing failure times. This has limited application of these analyses, particularly, within the ecological field where fates of marked animals may be unknown. To address these limitations, we developed an integrated approach within a Bayesian framework to estimate hazard rates in the face of unknown fates. We combine failure/survival times from individuals whose fates are known and times of which are interval-censored with information from those whose fates are unknown, and model the process of detecting animals with unknown fates. This provides the foundation for our integrated model and permits necessary parameter estimation. We provide the Bayesian model, its derivation, and use simulation techniques to investigate the properties and performance of our approach under several scenarios. Lastly, we apply our estimation technique using a piece-wise constant hazard function to investigate the effects of year, age, chick size and sex, sex of the tending adult, and nesting habitat on mortality hazard rates of the endangered mountain plover (Charadrius montanus) chicks. Traditional models were inappropriate for this analysis because fates of some individual chicks were unknown due to failed radio transmitters. Simulations revealed biases of posterior mean estimates were minimal (≤ 4.95%), and posterior distributions behaved as expected with RMSE of the estimates decreasing as sample sizes, detection probability, and survival increased. We determined mortality hazard rates for plover chicks were highest at <5 days old and were lower for chicks with larger birth weights and/or whose nest was within agricultural habitats. Based on its performance, our approach greatly expands the range of problems for which event-time analyses can be used by eliminating the need for having completely known fate data.

Injury risks of EMS responders: evidence from the National Fire Fighter Near-Miss Reporting System

PubMed Central

Taylor, Jennifer A; Davis, Andrea L; Barnes, Brittany; Lacovara, Alicia V; Patel, Reema

2015-01-01

Objectives We analysed near-miss and injury events reported to the National Fire Fighter Near-Miss Reporting System (NFFNMRS) to investigate the workplace hazards and safety concerns of Emergency Medical Services (EMS) responders in the USA. Methods We reviewed 769 ‘non-fire emergency event’ reports from the NFFNMRS using a mixed methods approach. We identified 185 emergency medical calls and analysed their narrative text fields. We assigned Mechanism of Near-Miss/Injury and Nature of Injury codes and then tabulated frequencies (quantitative). We coded major themes regarding work hazards and safety concerns reported by the EMS responders (qualitative). Results Of the 185 emergency medical calls, the most commonly identified Mechanisms of Near-Miss/Injury to EMS responders was Assaults, followed by Struck-by Motor Vehicle, and Motor Vehicle Collision. The most commonly identified weapon used in an assault was a firearm. We identified 5 major domains of workplace hazards and safety concerns: Assaults by Patients, Risks from Motor Vehicles, Personal Protective Equipment, Relationships between Emergency Responders, and Policies, Procedures and Practices. Conclusions Narrative text from the NFFNMRS is a rich source of data that can be analysed quantitatively and qualitatively to provide insight into near-misses and injuries sustained by EMS responders. Near-miss reporting systems are critical components for occupational hazard surveillance. PMID:26068510

Preservation of crossmodal selective attention in healthy aging

PubMed Central

Hugenschmidt, Christina E.; Peiffer, Ann M.; McCoy, Thomas P.; Hayasaka, Satoru; Laurienti, Paul J.

2010-01-01

The goal of the present study was to determine if older adults benefited from attention to a specific sensory modality in a voluntary attention task and evidenced changes in voluntary or involuntary attention when compared to younger adults. Suppressing and enhancing effects of voluntary attention were assessed using two cued forced-choice tasks, one that asked participants to localize and one that asked them to categorize visual and auditory targets. Involuntary attention was assessed using the same tasks, but with no attentional cues. The effects of attention were evaluated using traditional comparisons of means and Cox proportional hazards models. All analyses showed that older adults benefited behaviorally from selective attention in both visual and auditory conditions, including robust suppressive effects of attention. Of note, the performance of the older adults was commensurate with that of younger adults in almost all analyses, suggesting that older adults can successfully engage crossmodal attention processes. Thus, age-related increases in distractibility across sensory modalities are likely due to mechanisms other than deficits in attentional processing. PMID:19404621

77 FR 58217 - Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of Delays in Processing of Special Permits Applications AGENCY: Pipeline and Hazardous Materials Safety.... FOR FURTHER INFORMATION CONTACT: Ryan Paquet, Director, Office of Hazardous Materials Special Permits...

77 FR 64846 - Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of Delays in Processing of Special Permits Applications AGENCY: Pipeline and Hazardous Materials Safety.... FOR FURTHER INFORMATION CONTACT: Ryan Paquet, Director, Office of Hazardous Materials Special Permits...

77 FR 15455 - Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of Delays in Processing of Special Permits Applications AGENCY: Pipeline and Hazardous Materials Safety... and Approvals, Pipeline and Hazardous Materials Safety Administration, U.S. Department of...

Logistic regression applied to natural hazards: rare event logistic regression with replications

NASA Astrophysics Data System (ADS)

Guns, M.; Vanacker, V.

2012-06-01

Statistical analysis of natural hazards needs particular attention, as most of these phenomena are rare events. This study shows that the ordinary rare event logistic regression, as it is now commonly used in geomorphologic studies, does not always lead to a robust detection of controlling factors, as the results can be strongly sample-dependent. In this paper, we introduce some concepts of Monte Carlo simulations in rare event logistic regression. This technique, so-called rare event logistic regression with replications, combines the strength of probabilistic and statistical methods, and allows overcoming some of the limitations of previous developments through robust variable selection. This technique was here developed for the analyses of landslide controlling factors, but the concept is widely applicable for statistical analyses of natural hazards.

36 CFR 218.6 - Reviewing officer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects... the administrative review processes of other Federal agencies, for authorized hazardous fuel reduction... administrative review. ...

PSHREG: A SAS macro for proportional and nonproportional subdistribution hazards regression

PubMed Central

Kohl, Maria; Plischke, Max; Leffondré, Karen; Heinze, Georg

2015-01-01

We present a new SAS macro %pshreg that can be used to fit a proportional subdistribution hazards model for survival data subject to competing risks. Our macro first modifies the input data set appropriately and then applies SAS's standard Cox regression procedure, PROC PHREG, using weights and counting-process style of specifying survival times to the modified data set. The modified data set can also be used to estimate cumulative incidence curves for the event of interest. The application of PROC PHREG has several advantages, e.g., it directly enables the user to apply the Firth correction, which has been proposed as a solution to the problem of undefined (infinite) maximum likelihood estimates in Cox regression, frequently encountered in small sample analyses. Deviation from proportional subdistribution hazards can be detected by both inspecting Schoenfeld-type residuals and testing correlation of these residuals with time, or by including interactions of covariates with functions of time. We illustrate application of these extended methods for competing risk regression using our macro, which is freely available at: http://cemsiis.meduniwien.ac.at/en/kb/science-research/software/statistical-software/pshreg, by means of analysis of a real chronic kidney disease study. We discuss differences in features and capabilities of %pshreg and the recent (January 2014) SAS PROC PHREG implementation of proportional subdistribution hazards modelling. PMID:25572709

Hazard interactions and interaction networks (cascades) within multi-hazard methodologies

NASA Astrophysics Data System (ADS)

Gill, Joel C.; Malamud, Bruce D.

2016-08-01

This paper combines research and commentary to reinforce the importance of integrating hazard interactions and interaction networks (cascades) into multi-hazard methodologies. We present a synthesis of the differences between multi-layer single-hazard approaches and multi-hazard approaches that integrate such interactions. This synthesis suggests that ignoring interactions between important environmental and anthropogenic processes could distort management priorities, increase vulnerability to other spatially relevant hazards or underestimate disaster risk. In this paper we proceed to present an enhanced multi-hazard framework through the following steps: (i) description and definition of three groups (natural hazards, anthropogenic processes and technological hazards/disasters) as relevant components of a multi-hazard environment, (ii) outlining of three types of interaction relationship (triggering, increased probability, and catalysis/impedance), and (iii) assessment of the importance of networks of interactions (cascades) through case study examples (based on the literature, field observations and semi-structured interviews). We further propose two visualisation frameworks to represent these networks of interactions: hazard interaction matrices and hazard/process flow diagrams. Our approach reinforces the importance of integrating interactions between different aspects of the Earth system, together with human activity, into enhanced multi-hazard methodologies. Multi-hazard approaches support the holistic assessment of hazard potential and consequently disaster risk. We conclude by describing three ways by which understanding networks of interactions contributes to the theoretical and practical understanding of hazards, disaster risk reduction and Earth system management. Understanding interactions and interaction networks helps us to better (i) model the observed reality of disaster events, (ii) constrain potential changes in physical and social vulnerability between successive hazards, and (iii) prioritise resource allocation for mitigation and disaster risk reduction.

Applying Additive Hazards Models for Analyzing Survival in Patients with Colorectal Cancer in Fars Province, Southern Iran

PubMed

Madadizadeh, Farzan; Ghanbarnejad, Amin; Ghavami, Vahid; Zare Bandamiri, Mohammad; Mohammadianpanah, Mohammad

2017-04-01

Introduction: Colorectal cancer (CRC) is a commonly fatal cancer that ranks as third worldwide and third and the fifth in Iranian women and men, respectively. There are several methods for analyzing time to event data. Additive hazards regression models take priority over the popular Cox proportional hazards model if the absolute hazard (risk) change instead of hazard ratio is of primary concern, or a proportionality assumption is not made. Methods: This study used data gathered from medical records of 561 colorectal cancer patients who were admitted to Namazi Hospital, Shiraz, Iran, during 2005 to 2010 and followed until December 2015. The nonparametric Aalen’s additive hazards model, semiparametric Lin and Ying’s additive hazards model and Cox proportional hazards model were applied for data analysis. The proportionality assumption for the Cox model was evaluated with a test based on the Schoenfeld residuals and for test goodness of fit in additive models, Cox-Snell residual plots were used. Analyses were performed with SAS 9.2 and R3.2 software. Results: The median follow-up time was 49 months. The five-year survival rate and the mean survival time after cancer diagnosis were 59.6% and 68.1±1.4 months, respectively. Multivariate analyses using Lin and Ying’s additive model and the Cox proportional model indicated that the age of diagnosis, site of tumor, stage, and proportion of positive lymph nodes, lymphovascular invasion and type of treatment were factors affecting survival of the CRC patients. Conclusion: Additive models are suitable alternatives to the Cox proportionality model if there is interest in evaluation of absolute hazard change, or no proportionality assumption is made. Creative Commons Attribution License

Pyrotechnic hazards classification and evaluation program. Phase 2, segment 3: Test plan for determining hazards associated with pyrotechnic manufacturing processes

NASA Technical Reports Server (NTRS)

1971-01-01

A comprehensive test plan for determining the hazards associated with pyrotechnic manufacturing processes is presented. The rationale for each test is based on a systematic analysis of historical accounts of accidents and a detailed study of the characteristics of each manufacturing process. The most hazardous manufacturing operations have been determined to be pressing, mixing, reaming, and filling. The hazard potential of a given situation is evaluated in terms of the probabilities of initiation, communication, and transition to detonation (ICT). The characteristics which affect the ICT probabilities include the ignition mechanisms which are present either in normal or abnormal operation, the condition and properties of the pyrotechnic material, and the configuration of the processing equipment. Analytic expressions are derived which describe the physical conditions of the system, thus permitting a variety of processes to be evaluated in terms of a small number of experiments.

Automated Hazard Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riddle, F. J.

2003-06-26

The Automated Hazard Analysis (AHA) application is a software tool used to conduct job hazard screening and analysis of tasks to be performed in Savannah River Site facilities. The AHA application provides a systematic approach to the assessment of safety and environmental hazards associated with specific tasks, and the identification of controls regulations, and other requirements needed to perform those tasks safely. AHA is to be integrated into existing Savannah River site work control and job hazard analysis processes. Utilization of AHA will improve the consistency and completeness of hazard screening and analysis, and increase the effectiveness of the workmore » planning process.« less

Food and Feed Safety Assessment: The Importance of Proper Sampling.

PubMed

Kuiper, Harry A; Paoletti, Claudia

2015-03-24

The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.

Analysis of the comprehensibility of chemical hazard communication tools at the industrial workplace.

PubMed

Ta, Goh Choo; Mokhtar, Mazlin Bin; Mohd Mokhtar, Hj Anuar Bin; Ismail, Azmir Bin; Abu Yazid, Mohd Fadhil Bin Hj

2010-01-01

Chemical classification and labelling systems may be roughly similar from one country to another but there are significant differences too. In order to harmonize various chemical classification systems and ultimately provide consistent chemical hazard communication tools worldwide, the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) was endorsed by the United Nations Economic and Social Council (ECOSOC). Several countries, including Japan, Taiwan, Korea and Malaysia, are now in the process of implementing GHS. It is essential to ascertain the comprehensibility of chemical hazard communication tools that are described in the GHS documents, namely the chemical labels and Safety Data Sheets (SDS). Comprehensibility Testing (CT) was carried out with a mixed group of industrial workers in Malaysia (n=150) and factors that influence the comprehensibility were analysed using one-way ANOVA. The ability of the respondents to retrieve information from the SDS was also tested in this study. The findings show that almost all the GHS pictograms meet the ISO comprehension criteria and it is concluded that the underlying core elements that enhance comprehension of GHS pictograms and which are also essential in developing competent persons in the use of SDS are training and education.

Food and feed safety assessment: the importance of proper sampling.

PubMed

Kuiper, Harry A; Paoletti, Claudia

2015-01-01

The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.

49 CFR 107.805 - Approval of cylinder and pressure receptacle requalifiers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL... Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders § 107.805 Approval of...; certifies the persons performing inspections have been trained and have the information contained in each...

Development of the management for parenteral nutrition traceability in a standard hospital.

PubMed

Bernabeu Soria, Beatriz; Mateo García, Máxima; Wanden-Berghe, Carmina; Cervera Peris, Mercedes; Piñeiro Corrales, Guadalupe; Sanz-Valero, Javier

2015-11-01

to develop the traceability control and the hazard analysis in the processes of parenteral nutrients (PN). a standardized graphical notation was generated, describing in detail each of the stages in the overall process. The presence of hazards was analysed by sequencing decisions. The existence of Control Points (CP) or Critical Control Points (CCP) was estimated by Criticality Index (CI) for each hazard taking into account the probability of occurrence and the severity of the damage. The threshold for the IC was set in 6. a specific flow chart for the management and traceability of PN was obtained, defining each of the stages in CPs (validation and transcription of the prescription and administration) or CCPs (preparation, storage and infusion pump -flow and filter-). Stages regarding the delivery, the recovery and the recycle of the packing material of PNs are not considered CPs and, therefore, they were not included in the dashboard. PN must be dealt with in the frame of a standardized management system in order to improve patient safety, clinical relevance, maximize resource efficiency and minimize procedural issues. The proposed system provides a global management model whose steps are fully defined, allowing monitoring and verification of PN. It would be convenient to make use of a software application to support the monitoring of the traceability management and to store the historical records in order to evaluate the system. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Persoff

The evaluation of impacts of potential volcanic eruptions on populations and facilities far in the future may involve detailed volcanological studies that differ from traditional hazards analyses. The proximity of Quaternary volcanoes to a proposed repository for disposal of the USA's high-level radioactive waste at Yucca Mountain, Nevada, has required in-depth study of probability and consequences of basaltic igneous activity. Because of the underground nature of the repository, evaluation of the potential effects of dike intrusion and interaction with the waste packages stored in underground tunnels (dnfts) as well as effects of eruption and ash dispersal have been important. Thesemore » studies include analyses of dike propagation, dike-drift intersection, flow of magma into dnfts, heat and volcanic gas migration, atmospheric dispersal of tephra, and redistribution of waste-contaminated tephra by surficial processes. Unlike traditional volcanic hazards studies that focus on impacts on housing, transportation, communications, etc. (to name a small subset), the igneous consequences studies at Yucca Mountain have focused on evaluation of igneous impacts on nuclear waste packages and implications for enhanced radioactive dose on a hypothetical future ({le} 10000 yrs) local population. Potential exposure pathways include groundwater (affected by in-situ degradation of waste packages by igneous heat and corrosion) and inhalation, ingestion, and external exposure due to deposition and redistribution of waste-contaminated tephra.« less

Frameworks and tools for risk assessment of manufactured nanomaterials.

PubMed

Hristozov, Danail; Gottardo, Stefania; Semenzin, Elena; Oomen, Agnes; Bos, Peter; Peijnenburg, Willie; van Tongeren, Martie; Nowack, Bernd; Hunt, Neil; Brunelli, Andrea; Scott-Fordsmand, Janeck J; Tran, Lang; Marcomini, Antonio

2016-10-01

Commercialization of nanotechnologies entails a regulatory requirement for understanding their environmental, health and safety (EHS) risks. Today we face challenges to assess these risks, which emerge from uncertainties around the interactions of manufactured nanomaterials (MNs) with humans and the environment. In order to reduce these uncertainties, it is necessary to generate sound scientific data on hazard and exposure by means of relevant frameworks and tools. The development of such approaches to facilitate the risk assessment (RA) of MNs has become a dynamic area of research. The aim of this paper was to review and critically analyse these approaches against a set of relevant criteria. The analysis concluded that none of the reviewed frameworks were able to fulfill all evaluation criteria. Many of the existing modelling tools are designed to provide screening-level assessments rather than to support regulatory RA and risk management. Nevertheless, there is a tendency towards developing more quantitative, higher-tier models, capable of incorporating uncertainty into their analyses. There is also a trend towards developing validated experimental protocols for material identification and hazard testing, reproducible across laboratories. These tools could enable a shift from a costly case-by-case RA of MNs towards a targeted, flexible and efficient process, based on grouping and read-across strategies and compliant with the 3R (Replacement, Reduction, Refinement) principles. In order to facilitate this process, it is important to transform the current efforts on developing databases and computational models into creating an integrated data and tools infrastructure to support the risk assessment and management of MNs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated Safety Analysis Tiers

NASA Technical Reports Server (NTRS)

Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

2009-01-01

Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

UNCERTAINTY AND SENSITIVITY ANALYSES FOR INTEGRATED HUMAN HEALTH AND ECOLOGICAL RISK ASSESSMENT OF HAZARDOUS WASTE DISPOSAL

EPA Science Inventory

While there is a high potential for exposure of humans and ecosystems to chemicals released from hazardous waste sites, the degree to which this potential is realized is often uncertain. Conceptually divided among parameter, model, and modeler uncertainties imparted during simula...

40 CFR 264.342 - Principal organic hazardous constituents (POHCs).

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE... feed to be burned. This specification will be based on the degree of difficulty of incineration of the... results of waste analyses and trial burns or alternative data submitted with part B of the facility's...

Current perspectives on the use of alternative species in human health and ecological hazard assessments

EPA Science Inventory

Traditional animal toxicity tests can be time and resource intensive thereby limiting the number of chemicals that can be comprehensively tested for potential hazards to humans and/or to the environment. Using several examples and analyses, we demonstrate that pathway-based analy...

Regionalization and Evaluation of Impacts of Climate Change on Mexican Coasts

NASA Astrophysics Data System (ADS)

Nava-Sanchez, E. H.; Murillo-Jimenez, J. M.; Godinez-Orta, L.; Morales-Perez, R. A.

2009-04-01

Mexican coasts exhibit a high variety of geoforms and processes, and consequently, are exposed to a variability of types and impact levels of geological hazards. Tropical cyclones are the most devastating hazards for the Mexican coast, although, impact levels are higher on the southern coast of both Atlantic and Pacific oceans. The second dangerous geo-hazards are earthquakes and tsunamis, which affect all Pacific coast, causing more damage the earthquakes generated in the Cocos Trench. For seismic hazards, there is a regionalization of the Mexican territory, however, even though the high levels of damages caused by other natural hazards, there is a lack of initiatives for performing atlas of natural hazards or coastal management plans. Exceptions are the local scale atlas of natural hazards by the Mexican Geological Survey or some other local scale atlas made with several errors by non experience private consultant companies. Our work shows results of analyses of coastal geological hazards associated to global warming such as the sea level rise, and the increase in strength of some coastal processes. Initially, due to the high diversity in coastal environments for the Mexican coast, it was considered that, a regional characterization of the coastal zone, and the gathering of environmental data for determining levels of impact of the various coastal hazards, as an evaluation of coastal vulnerability. Thus, the basic criteria for defining Coastal Regions, in order of importance, were the following: geomorphology, climate, geology, tectonics, and oceanography. Also, some anthropogenic factors were taken in account for the coastal regionalization, such as civil construction along the coastline, land used and modification of the fluvial system. The analysis of such criteria, allows us to classify the Mexican coasts in 10 Coastal Regions. On the Pacific coast regions are: (I) Pacific Coast of Baja California, (II) Gulf Coast of Baja California, (III) Coastal Plain of the Gulf de California, (IV) Pacific Southwest Coast, and (V) Chiapaneca Coastal Plain. On the Atlantic coast, regions are: (VI) Tamulipeca Coastal Plain, (VII) Veracruzana Volcanic Coast, (VIII) Tabasqueña Coastal Plain, (IX) Yucatan Platform, and (X) Caribean Coast. Secondly, the coastal hazards associated to a rising sea level and increasing strength of coastal processes due to climate change, were analyzed, and allowed us to determine, in order of importance, the following hazards: (a) marine flooding, by sea level rise per se and effect of storm surges; (b) beach erosion by waves, causing lose of beach width or the retreat of the whole beach system, and overwash of sand barriers; (c) fluvial flooding of coastal plains and deltaic areas; (d) salinization of estuaries and aquifers by saltwater intrusion. Finally, after overlying the characteristics of each Coastal Region and its exposition to the identified coastal hazards, we concluded that, Coastal Regions highly vulnerable to sea level rise are number V and VIII, since they show wide lowlands (up to 7 m above MSL), and have high populated areas affected by heavy rain, tropical cyclones and storm surges; regions with moderate vulnerability are number VI, IX and X, which contain lowlands (up to 7 m above MSL), populated areas, exhibit watershed with low sediment production, and are located on the tropical cyclone tracks; regions with moderately low vulnerability are number III and VII, which contain relatively narrow lowlands, important lagoon and deltaic systems, several rivers are affected by anthropogenic activities, and are moderately affected by storms and tropical cyclones; regions with low vulnerability and short coastlines exposed to sea level rise hazards are regions number I and IV, which contain narrow lagoon and deltaic systems; and finally, region II is of a very low vulnerability, with narrow and scarce areas exposed to sea level rise hazards. This project was part of a Research Program on Climate Change Impacts, supported by the Mexican Institute for Water Technology and was carried out as a collaborative subprogram between that institute and the Interdisciplinary Center for Marine Sciences.

Landslide hazard assessment: recent trends and techniques.

PubMed

Pardeshi, Sudhakar D; Autade, Sumant E; Pardeshi, Suchitra S

2013-01-01

Landslide hazard assessment is an important step towards landslide hazard and risk management. There are several methods of Landslide Hazard Zonation (LHZ) viz. heuristic, semi quantitative, quantitative, probabilistic and multi-criteria decision making process. However, no one method is accepted universally for effective assessment of landslide hazards. In recent years, several attempts have been made to apply different methods of LHZ and to compare results in order to find the best suited model. This paper presents the review of researches on landslide hazard mapping published in recent years. The advanced multivariate techniques are proved to be effective in spatial prediction of landslides with high degree of accuracy. Physical process based models also perform well in LHZ mapping even in the areas with poor database. Multi-criteria decision making approach also play significant role in determining relative importance of landslide causative factors in slope instability process. Remote Sensing and Geographical Information System (GIS) are powerful tools to assess landslide hazards and are being used extensively in landslide researches since last decade. Aerial photographs and high resolution satellite data are useful in detection, mapping and monitoring landslide processes. GIS based LHZ models helps not only to map and monitor landslides but also to predict future slope failures. The advancements in Geo-spatial technologies have opened the doors for detailed and accurate assessment of landslide hazards.

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Radiological hazards related to possessing or processing licensed material at its facility; (ii) Chemical hazards of licensed material and hazardous chemicals produced from licensed material; (iii) Facility... performed by a team with expertise in engineering and process operations. The team shall include at least...

44 CFR 201.4 - Standard State Mitigation Plans.

Code of Federal Regulations, 2011 CFR

2011-10-01

... reduce risks from natural hazards and serves as a guide for State decision makers as they commit resources to reducing the effects of natural hazards. (b) Planning process. An effective planning process is... risk assessments must characterize and analyze natural hazards and risks to provide a statewide...

The Development of a Tri-Service Notification System for Type 1 Medical Materiel Complaints.

DTIC Science & Technology

1992-09-01

Hazardous Food and Nonprescription Drug Recall System ...... ............... .... 24 Chapter Summary ..... ............... .... 27 III. Methodology...examination of an existing DOD notification process for hazardous food and nonprescription drugs. It must be emphasized that the process being investigated in...notification process for defective medical materiel has not been accomplished. Hazardous Food and Nonprescription Drug Recall System In examining the DoD

Accident Analyses in Support of the Sludge Water System Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

FINFROCK, S.H.

This document quantifies the potential health effects of the unmitigated hazards identified Hey (2002) for retrieval of sludge from the KE basin. It also identifies potential controls and any supporting mitigative analyses.

Environmental, technical and technological aspects of hazardous waste management in Poland

NASA Astrophysics Data System (ADS)

Pyssa, Justyna

2017-10-01

The issue of recovery and disposal of hazardous waste is not a new concern. The waste comes from various processes and technologies and therefore the bigger emphasis should be placed on reducing quantities of generated hazardous waste (which is often connected with changes in the technology of manufacturing a given product) and limitation of their negative influence on natural environment. Plants specializing in waste processing processes should meet the so-called cardinal triad of conditions deciding on the full success of investment, and namely: economic effectiveness, ecological efficiency and social acceptance. The structure of generation of hazardous waste in EU-28 has been presented in the paper. Methods of hazardous waste disposal in Poland have been discussed. Economic and ecological criteria for the selection of technology of hazardous waste disposal have been analyzed. The influence of the hazardous waste on the environment is also presented. For four groups of waste, which are currently stored, alternative methods of disposal have been proposed.

High-Explosives Applications Facility (HEAF)

NASA Astrophysics Data System (ADS)

Morse, J. L.; Weingart, R. C.

1989-03-01

This Safety Analysis Report (SAR) reviews the safety and environmental aspects of the High Explosives Applications Facility (HEAF). Topics covered include the site selected for the HEAF, safety design criteria, operations planned within the facility, and the safety and environmental analyses performed on this project to date. Provided in the Summary section is a review of hazards and the analyses, conclusions, and operating limits developed in this SAR. Appendices provide supporting documents relating to this SAR. This SAR is required by the LLNL Health and Safety Manual and DOE Order 5481.1B(2) to document the safety analysis efforts. The SAR was assembled by the Hazards Control Department, B-Division, and HEAF project personnel. This document was reviewed by B Division, the Chemistry Department, the Hazards Control Department, the Laboratory Associate Director for Administration and Operations, and the Associate Directors ultimately responsible for HEAF operations.

Determinants of hazardous drinking among black South African men who have sex with men.

PubMed

Knox, Justin; Reddy, Vasu; Lane, Tim; Lovasi, Gina; Hasin, Deborah; Sandfort, Theo

2017-11-01

There is a known heavy burden of hazardous drinking and its associated health risks among black South African MSM; however, no study to date has identified risk factors for hazardous drinking among this nor any other African MSM population. A cross-sectional survey was conducted among 480 black South African MSM recruited using respondent-driven sampling. All analyses were adjusted using an RDS II estimator. Multivariable logistic regression was used to assess the relationship between demographic characteristics, psychosocial factors, behavioral attributes and hazardous drinking. More than half of the men (62%, 95%CI=56%-68%) screened positive as hazardous drinkers. In multivariable analyses, living in a township (versus the city of Pretoria) (aOR=1.9, 95%CI=1.2-3.1, p<.01), more gender dysphoria (aOR=1.4, 95%CI=1.0-1.8, p=.03), having ever received money or other incentives in return for sex (aOR=2.4, 95%CI=1.3-4.3, p<.01), having been sexually abused as a child (aOR=2.6, 95%CI=1.1-6.4, p=.03), having anxiety (aOR=5.4, 95%CI=1.2-24.3, p=.03), and social network drinking behavior (aOR=5.4, 95%CI=1.2-24.3, p=.03) were positively associated with hazardous drinking. Being sexually attracted only to men (aOR=0.3, 95%CI=0.1-0.8, p=.01) was negatively associated with hazardous drinking. Hazardous drinking is highly prevalent among black South African MSM. Multiple indicators of social vulnerability were identified as independent determinants of hazardous drinking. These findings are of heightened concern because these health problems often work synergistically to increase risk of HIV infection and should be taken into consideration by efforts aimed at reducing hazardous drinking among this critical population. Copyright © 2017 Elsevier B.V. All rights reserved.

CHARACTERIZATION OF ORGANIC EMISSIONS FROM HAZARDOUS WASTE INCINERATION PROCESSES UNDER THE NEW EPA DRAFT RISK BURN GUIDANCE: MEASUREMENT ISSUES

EPA Science Inventory

The paper discusses measurement issues relating to the characterization of organic emissions from hazardous waste incineration processes under EPA's new risk burn guidance. The recently published draft quidance recommends that hazardous waste combustion facilities complete a mass...

Implementation of hazard analysis and critical control point (HACCP) in dried anchovy production process

NASA Astrophysics Data System (ADS)

Citraresmi, A. D. P.; Wahyuni, E. E.

2018-03-01

The aim of this study was to inspect the implementation of Hazard Analysis and Critical Control Point (HACCP) for identification and prevention of potential hazards in the production process of dried anchovy at PT. Kelola Mina Laut (KML), Lobuk unit, Sumenep. Cold storage process is needed in each anchovy processing step in order to maintain its physical and chemical condition. In addition, the implementation of quality assurance system should be undertaken to maintain product quality. The research was conducted using a survey method, by following the whole process of making anchovy from the receiving raw materials to the packaging of final product. The method of data analysis used was descriptive analysis method. Implementation of HACCP at PT. KML, Lobuk unit, Sumenep was conducted by applying Pre Requisite Programs (PRP) and preparation stage consisting of 5 initial stages and 7 principles of HACCP. The results showed that CCP was found in boiling process flow with significant hazard of Listeria monocytogenesis bacteria and final sorting process with significant hazard of foreign material contamination in the product. Actions taken were controlling boiling temperature of 100 – 105°C for 3 - 5 minutes and training for sorting process employees.

Multi-hazard risk assessment applied to hydraulic fracturing operations

NASA Astrophysics Data System (ADS)

Garcia-Aristizabal, Alexander; Gasparini, Paolo; Russo, Raffaella; Capuano, Paolo

2017-04-01

Without exception, the exploitation of any energy resource produces impacts and intrinsically bears risks. Therefore, to make sound decisions about future energy resource exploitation, it is important to clearly understand the potential environmental impacts in the full life-cycle of an energy development project, distinguishing between the specific impacts intrinsically related to exploiting a given energy resource and those shared with the exploitation of other energy resources. Technological advances as directional drilling and hydraulic fracturing have led to a rapid expansion of unconventional resources (UR) exploration and exploitation; as a consequence, both public health and environmental concerns have risen. The main objective of a multi-hazard risk assessment applied to the development of UR is to assess the rate (or the likelihood) of occurrence of incidents and the relative potential impacts on surrounding environment, considering different hazards and their interactions. Such analyses have to be performed considering the different stages of development of a project; however, the discussion in this paper is mainly focused on the analysis applied to the hydraulic fracturing stage of a UR development project. The multi-hazard risk assessment applied to the development of UR poses a number of challenges, making of this one a particularly complex problem. First, a number of external hazards might be considered as potential triggering mechanisms. Such hazards can be either of natural origin or anthropogenic events caused by the same industrial activities. Second, failures might propagate through the industrial elements, leading to complex scenarios according to the layout of the industrial site. Third, there is a number of potential risk receptors, ranging from environmental elements (as the air, soil, surface water, or groundwater) to local communities and ecosystems. The multi-hazard risk approach for this problem is set by considering multiple hazards (and their possible interactions) as possible sources of system's perturbation that might drive to the development of an incidental event. Given the complexity of the problem, we adopt a multi-level approach: first, perform a qualitative analysis oriented to the identification of a wide range of possible scenarios; this process is based on a review of potential impacts in different risk receptors reported in literature, which is condensed in a number of causal diagrams created for different stages of a UR development project. Second, the most important scenarios for quantitative multi-hazard risk analyses are selected for further quantification. This selection is based on the identification of major risks, i.e., those related with the occurrence of low probability/high impact extreme events. The general framework for the quantitative multi-hazard risk analysis is represented using a so-called bow-tie structure. It is composed of a fault tree on the left hand side of the graphic plot, identifying the possible events causing the critical (or top) event, and an event tree on the right-hand side showing the possible consequences of the critical event. This work was supported under SHEER: "Shale Gas Exploration and Exploitation Induced Risks" project n.640896, funded from Horizon 2020 - R&I Framework Programme, call H2020-LCE-2014-1

The hazards of hazard identification in environmental epidemiology.

PubMed

Saracci, Rodolfo

2017-08-09

Hazard identification is a major scientific challenge, notably for environmental epidemiology, and is often surrounded, as the recent case of glyphosate shows, by debate arising in the first place by the inherently problematic nature of many components of the identification process. Particularly relevant in this respect are components less amenable to logical or mathematical formalization and essentially dependent on scientists' judgment. Four such potentially hazardous components that are capable of distorting the correct process of hazard identification are reviewed and discussed from an epidemiologist perspective: (1) lexical mix-up of hazard and risk (2) scientific questions as distinct from testable hypotheses, and implications for the hierarchy of strength of evidence obtainable from different types of study designs (3) assumptions in prior beliefs and model choices and (4) conflicts of interest. Four suggestions are put forward to strengthen a process that remains in several aspects judgmental, but not arbitrary, in nature.

Assumptions made when preparing drug exposure data for analysis have an impact on results: An unreported step in pharmacoepidemiology studies.

PubMed

Pye, Stephen R; Sheppard, Thérèse; Joseph, Rebecca M; Lunt, Mark; Girard, Nadyne; Haas, Jennifer S; Bates, David W; Buckeridge, David L; van Staa, Tjeerd P; Tamblyn, Robyn; Dixon, William G

2018-04-17

Real-world data for observational research commonly require formatting and cleaning prior to analysis. Data preparation steps are rarely reported adequately and are likely to vary between research groups. Variation in methodology could potentially affect study outcomes. This study aimed to develop a framework to define and document drug data preparation and to examine the impact of different assumptions on results. An algorithm for processing prescription data was developed and tested using data from the Clinical Practice Research Datalink (CPRD). The impact of varying assumptions was examined by estimating the association between 2 exemplar medications (oral hypoglycaemic drugs and glucocorticoids) and cardiovascular events after preparing multiple datasets derived from the same source prescription data. Each dataset was analysed using Cox proportional hazards modelling. The algorithm included 10 decision nodes and 54 possible unique assumptions. Over 11 000 possible pathways through the algorithm were identified. In both exemplar studies, similar hazard ratios and standard errors were found for the majority of pathways; however, certain assumptions had a greater influence on results. For example, in the hypoglycaemic analysis, choosing a different variable to define prescription end date altered the hazard ratios (95% confidence intervals) from 1.77 (1.56-2.00) to 2.83 (1.59-5.04). The framework offers a transparent and efficient way to perform and report drug data preparation steps. Assumptions made during data preparation can impact the results of analyses. Improving transparency regarding drug data preparation would increase the repeatability, reproducibility, and comparability of published results. © 2018 The Authors. Pharmacoepidemiology & Drug Safety Published by John Wiley & Sons Ltd.

An (even) broader perspective: Combining environmental processes and natural hazards education in a MSc programme

NASA Astrophysics Data System (ADS)

Heckmann, Tobias; Haas, Florian; Trappe, Martin; Cyffka, Bernd; Becht, Michael

2010-05-01

Natural hazards are processes occurring in the natural environment that negatively affect human society. In most instances, the definition of natural hazards implies sudden events as different as earthquakes, floods or landslides. In addition, there are other phenomena that occur more subtly or slowly, and nevertheless may have serious adverse effects on the human environment. Hence, a comprehensive study programme in natural hazards has to include not only the conspicuous causes and effects of natural catastrophes, but of environmental processes in general. Geography as a discipline is located at the interface of natural, social and economic sciences; the physical geography programme described here is designed to include the social and economic dimension as well as management issues. Modules strengthening the theoretical background of geomorphic, geological, hydrological and meteorological processes and hazards are complemented by practical work in the field and the laboratory, dealing with measuring and monitoring environmental processes. On this basis, modeling and managing skills are developed. Another thread in the transdisciplinary programme deals with sustainability and environmental policy issues, and environmental psychology (e.g. perception of and reaction to hazards). This will improve the communication and team working skills of students wherever they are part of an interdisciplinary working group. Through the involvement in research programmes, students are confronted ‘hands on' with the different aspects of environmental processes and their consequences; thus, they will be excellently but not exclusively qualified for positions in the ‘natural hazards' sector.

DEMONSTRATION BULLETIN: THE DEHYDRO-TECH CORP. CARVER-GREENFIELD PROCESS

EPA Science Inventory

The Carver-Greenfield (C-G) Process (Figure 1) is a physical process that separates hazardous oil-soluble organic contaminants from sludges, soils, and non-aqueous liquids. The process involves adding to the waste a "carrier" oil, which removes hazardous organics from contamin...

System safety management lessons learned from the US Army acquisition process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piatt, J.A.

1989-05-01

The Assistant Secretary of the Army for Research, Development and Acquisition directed the Army Safety Center to provide an audit of the causes of accidents and safety of use restrictions on recently fielded systems by tracking residual hazards back through the acquisition process. The objective was to develop lessons learned'' that could be applied to the acquisition process to minimize mishaps in fielded systems. System safety management lessons learned are defined as Army practices or policies, derived from past successes and failures, that are expected to be effective in eliminating or reducing specific systemic causes of residual hazards. They aremore » broadly applicable and supportive of the Army structure and acquisition objectives. Pacific Northwest Laboratory (PNL) was given the task of conducting an independent, objective appraisal of the Army's system safety program in the context of the Army materiel acquisition process by focusing on four fielded systems which are products of that process. These systems included the Apache helicopter, the Bradley Fighting Vehicle (BFV), the Tube Launched, Optically Tracked, Wire Guided (TOW) Missile and the High Mobility Multipurpose Wheeled Vehicle (HMMWV). The objective of this study was to develop system safety management lessons learned associated with the acquisition process. The first step was to identify residual hazards associated with the selected systems. Since it was impossible to track all residual hazards through the acquisition process, certain well-known, high visibility hazards were selected for detailed tracking. These residual hazards illustrate a variety of systemic problems. Systemic or process causes were identified for each residual hazard and analyzed to determine why they exist. System safety management lessons learned were developed to address related systemic causal factors. 29 refs., 5 figs.« less

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards.

PubMed

Gazica, Michele W; Spector, Paul E

2016-01-01

Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone.

Lunar mission safety and rescue: Technical summary

NASA Technical Reports Server (NTRS)

1971-01-01

A technical summary is presented of the escape/rescue and the hazards analyses for manned missions and operations in the 1980 time frame. Hazards are interpreted as hazards to man, not to equipment, program schedule, or program objectives. Hazards in 39 individual areas are analyzed, and corrective measures are recommended. Over 200 safety guidelines are proposed, based on significant hazards. Escape and rescue situtations and requirements are identified and analyzed, and escape/survival/rescue concepts are defined to cope with each escape/rescue situation. Areas in which research or technical development efforts could improve mission safety are identified. It is concluded that the primary emphasis should be on survival and escape provisions, with rescue required only where self-help cannot bring the endangered crewmen to a safe haven.

Assessment of potential exposure to friable insulation materials containing asbestos

NASA Technical Reports Server (NTRS)

Kim, W. S.; Kuivinen, D. E.

1980-01-01

Asbestos and the procedures for assessing potential exposure hazards are discussed. Assessment includes testing a bulk sample of the suspected material for the presence of asbestos, and monitoring the air, if necessary. Based on field inspections and laboratory analyses, the health hazard is evaluated, and abatement measures are taken if a potential hazard exists. Throughout the assessment and abatement program, all applicable regulations are administered as specified by the Environmental Protection Agency and the Occupational Safety and Health Administration.

78 FR 60755 - Hazardous Materials: Enhanced Enforcement Procedures-Resumption of Transportation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

.... Summary of MAP-21 and Final Rule V. Summary Review of Amendments VI. Regulatory Analyses and Notices A.... Executive Summary On July 6, 2012, the President signed the Moving Ahead for Progress in the 21st Century Act, or the MAP-21, which included the Hazardous Materials Transportation Safety Improvement Act of...

49 CFR Appendix D to Part 236 - Independent Review of Verification and Validation

Code of Federal Regulations, 2011 CFR

2011-10-01

... associated with the product, the products subsystems, or the products components, in order to preserve the... if they have been agreed to previously with FRA. Based on these analyses, the reviewer shall identify...) The reviewer shall analyze the Hazard Log and/or any other hazard analysis documents for...

49 CFR Appendix D to Part 236 - Independent Review of Verification and Validation

Code of Federal Regulations, 2014 CFR

2014-10-01

... associated with the product, the products subsystems, or the products components, in order to preserve the... if they have been agreed to previously with FRA. Based on these analyses, the reviewer shall identify...) The reviewer shall analyze the Hazard Log and/or any other hazard analysis documents for...

49 CFR Appendix D to Part 236 - Independent Review of Verification and Validation

Code of Federal Regulations, 2013 CFR

2013-10-01

... associated with the product, the products subsystems, or the products components, in order to preserve the... if they have been agreed to previously with FRA. Based on these analyses, the reviewer shall identify...) The reviewer shall analyze the Hazard Log and/or any other hazard analysis documents for...

49 CFR Appendix D to Part 236 - Independent Review of Verification and Validation

Code of Federal Regulations, 2012 CFR

2012-10-01

... associated with the product, the products subsystems, or the products components, in order to preserve the... if they have been agreed to previously with FRA. Based on these analyses, the reviewer shall identify...) The reviewer shall analyze the Hazard Log and/or any other hazard analysis documents for...

The FTA Method And A Possibility Of Its Application In The Area Of Road Freight Transport

NASA Astrophysics Data System (ADS)

Poliaková, Adela

2015-06-01

The Fault Tree process utilizes logic diagrams to portray and analyse potentially hazardous events. Three basic symbols (logic gates) are adequate for diagramming any fault tree. However, additional recently developed symbols can be used to reduce the time and effort required for analysis. A fault tree is a graphical representation of the relationship between certain specific events and the ultimate undesired event (2). This paper deals to method of Fault Tree Analysis basic description and provides a practical view on possibility of application by quality improvement in road freight transport company.

Ground subsidence information as a valuable layer in GIS analysis

NASA Astrophysics Data System (ADS)

Murdzek, Radosław; Malik, Hubert; Leśniak, Andrzej

2018-04-01

Among the technologies used to improve functioning of local governments the geographic information systems (GIS) are widely used. GIS tools allow to simultaneously integrate spatial data resources, analyse them, process and use them to make strategic decisions. Nowadays GIS analysis is widely used in spatial planning or environmental protection. In these applications a number of spatial information are utilized, but rarely it is an information about environmental hazards. This paper includes information about ground subsidence that occurred in USCB mining area into GIS analysis. Monitoring of this phenomenon can be carried out using the radar differential interferometry (DInSAR) method.

Complex Dynamic Processes in Sign Tracking With an Omission Contingency (Negative Automaintenance)

PubMed Central

Killeen, Peter R.

2008-01-01

Hungry pigeons received food periodically, signaled by the onset of a keylight. Key pecks aborted the feeding. Subjects responded for thousands of trials, despite the contingent nonreinforcement, with varying probability as the intertrial interval was varied. Hazard functions showed the dominant tendency to be perseveration in responding and not responding. Once perseveration was accounted for, a linear operator model of associative conditioning further improved predictions. Response rates during trials were correlated with the prior probabilities of a response. Rescaled range analyses showed that the behavioral trajectories were a kind of fractional Brownian motion. PMID:12561133

Complex dynamic processes in sign tracking with an omission contingency (negative automaintenance).

PubMed

Killeen, Peter R

2003-01-01

Hungry pigeons received food periodically, signaled by the onset of a keylight. Key pecks aborted the feeding. Subjects responded for thousands of trials, despite the contingent nonreinforcement, with varying probability as the intertrial interval was varied. Hazard functions showed the dominant tendency to be perseveration in responding and not responding. Once perseveration was accounted for, a linear operator model of associative conditioning further improved predictions. Response rates during trials were correlated with the prior probabilities of a response. Rescaled range analyses showed that the behavioral trajectories were a kind of fractional Brownian motion.

Understanding differences in results from literature-based and individual patient meta-analyses: an example from meta-analyses of observational data.

PubMed

Poppe, Katrina K; Doughty, Robert N; Yu, Cheuk-Man; Quintana, Miguel; Møller, Jacob E; Klein, Allan L; Gamble, Greg D; Dini, Frank L; Whalley, Gillian A

2011-04-14

Meta-analyses are increasingly used to summarise observational data however a literature meta-analysis (LMA) may give different results to the corresponding individual patient meta-analysis (IPMA). This study compares the published results of equivalent LMAs and IPMAs, highlighting factors that can affect the results and therefore impact on clinical interpretation of meta-analyses. Univariate results from published meta-analyses of prospective observational outcome data were compared, as were the number of studies, patients and length of follow-up. The absolute difference in survival was calculated. The association between severe diastolic dysfunction (RFP) and death post acute myocardial infarction (AMI) and in chronic heart failure (HF) were used as clinical examples. The IPMA hazard ratio was lower that the LMA odds ratio: AMI hazard ratio 2.67 (95% confidence interval 2.23 to 3.20), odds ratio 4.10 (3.38 to 4.99); HF hazard ratio 2.42 (2.06 to 2.83), odds ratio 4.36 (3.60 to 5.04). The IPMAs contained most of the studies from the LMAs as well as additional unpublished data, and a longer length of follow-up was available in the IPMAs (AMI 3.7 vs 2.6 yr, HF 4.0 vs 1.5 yr). Restricting analysis to the same studies in both the LMA and IPMA resulted in a similar difference in effect sizes between methods to those found in the published analyses. The result of a meta-analysis is affected by whether study level or individual patient data have been used, and the variant of analysis that is required. Awareness and consideration of these factors is important for clinical interpretation of meta-analyses. Copyright © 2009 Elsevier B.V. All rights reserved.

Safety Analysis of Soybean Processing for Advanced Life Support

NASA Technical Reports Server (NTRS)

Hentges, Dawn L.

1999-01-01

Soybeans (cv. Hoyt) is one of the crops planned for food production within the Advanced Life Support System Integration Testbed (ALSSIT), a proposed habitat simulation for long duration lunar/Mars missions. Soybeans may be processed into a variety of food products, including soymilk, tofu, and tempeh. Due to the closed environmental system and importance of crew health maintenance, food safety is a primary concern on long duration space missions. Identification of the food safety hazards and critical control points associated with the closed ALSSIT system is essential for the development of safe food processing techniques and equipment. A Hazard Analysis Critical Control Point (HACCP) model was developed to reflect proposed production and processing protocols for ALSSIT soybeans. Soybean processing was placed in the type III risk category. During the processing of ALSSIT-grown soybeans, critical control points were identified to control microbiological hazards, particularly mycotoxins, and chemical hazards from antinutrients. Critical limits were suggested at each CCP. Food safety recommendations regarding the hazards and risks associated with growing, harvesting, and processing soybeans; biomass management; and use of multifunctional equipment were made in consideration of the limitations and restraints of the closed ALSSIT.

Hazardous Materials Verification and Limited Characterization Report on Sodium and Caustic Residuals in Materials and Fuel Complex Facilities MFC-799/799A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gary Mecham

2010-08-01

This report is a companion to the Facilities Condition and Hazard Assessment for Materials and Fuel Complex Sodium Processing Facilities MFC-799/799A and Nuclear Calibration Laboratory MFC-770C (referred to as the Facilities Condition and Hazards Assessment). This report specifically responds to the requirement of Section 9.2, Item 6, of the Facilities Condition and Hazards Assessment to provide an updated assessment and verification of the residual hazardous materials remaining in the Sodium Processing Facilities processing system. The hazardous materials of concern are sodium and sodium hydroxide (caustic). The information supplied in this report supports the end-point objectives identified in the Transition Planmore » for Multiple Facilities at the Materials and Fuels Complex, Advanced Test Reactor, Central Facilities Area, and Power Burst Facility, as well as the deactivation and decommissioning critical decision milestone 1, as specified in U.S. Department of Energy Guide 413.3-8, “Environmental Management Cleanup Projects.” Using a tailored approach and based on information obtained through a combination of process knowledge, emergency management hazardous assessment documentation, and visual inspection, this report provides sufficient detail regarding the quantity of hazardous materials for the purposes of facility transfer; it also provides that further characterization/verification of these materials is unnecessary.« less

49 CFR 107.117 - Emergency processing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS... than the hazardous material to be transported) that could not be prevented if the application were...

49 CFR 107.117 - Emergency processing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS... than the hazardous material to be transported) that could not be prevented if the application were...

Challenges to social capacity building in flood-affected areas of southern Poland

NASA Astrophysics Data System (ADS)

Działek, J.; Biernacki, W.; Bokwa, A.

2013-10-01

Various aspects of beliefs, behaviour and expectations of at-risk populations were analysed in four case study localities in southern Poland that were affected by flooding in 1997 and 2001. They represent localities of different sizes and are characterised by different paths of historical development. Two of them are deep-rooted communities with dense, strong family and neighbourhood ties, while the other two experienced an almost total replacement of their population due to decisions taken after World War II and still suffer from less developed social networks. Historical events also resulted in the disruption of local memories of flooding and transmission of knowledge about natural hazards. A questionnaire survey was conducted in late autumn 2006, followed by structured telephone interviews and focus group interviews in spring 2008. The results of the survey and interviews were analysed with reference to the social capacity framework and its five dimensions: knowledge, motivational, network, economic and governance capacities. Network capacities, that is resources of bonding and bridging social capital, were considered a key notion when analysing and interpreting the results. The differences in the local resources and abilities available in each of the localities to prepare a response to natural hazards were revealed. Consequently, challenges faced in the process of building and strengthening social capacity were identified as well as ways to address these challenges. It was concluded that there are general trends and tendencies that need to be considered in risk management strategies, however the different starting points of each case study community calls for different means and approaches, as well as producing somewhat different expected outcomes.

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Analysis of Operational Hazards and Safety Requirements for Traffic Aware Strategic Aircrew Requests (TASAR)

NASA Technical Reports Server (NTRS)

Koczo, Stefan, Jr.

2013-01-01

Safety analyses of the Traffic Aware Strategic Aircrew Requests (TASAR) Electronic Flight Bag (EFB) application are provided to establish its Failure Effects Classification which affects certification and operational approval requirements. TASAR was developed by NASA Langley Research Center to offer flight path improvement opportunities to the pilot during flight for operational benefits (e.g., reduced fuel, flight time). TASAR, using own-ship and network-enabled information concerning the flight and its environment, including weather and Air Traffic Control (ATC) system constraints, provides recommended improvements to the flight trajectory that the pilot can choose to request via Change Requests to ATC for revised clearance. This study reviews the Change Request process of requesting updates to the current clearance, examines the intended function of TASAR, and utilizes two safety assessment methods to establish the Failure Effects Classification of TASAR. Considerable attention has been given in this report to the identification of operational hazards potentially associated with TASAR.

Phytoremediation of hazardous wastes. Technical report, 23--26 July 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCutcheon, S.C.; Wolfe, N.L.; Carreria, L.H.

1995-07-26

A new and innovative approach to phytoremediation (the use of plants to degrade hazardous contaminants) was developed. The new approach to phytoremediation involves rigorous pathway analyses, mass balance determinations, and identification of specific enzymes that break down trinitrotoluene (TNT), other explosives (RDX and HMX), nitrobenzene, and chlorinated solvents (e.g., TCE and PCE) (EPA 1994). As a good example, TNT is completely and rapidly degraded by nitroreductase and laccase enzymes. The aromatic ring is broken and the carbon in the ring fragments is incorporated into new plant fiber, as part of the natural lignification process. Half lives for TNT degradation approachmore » 1 hr or less under ideal laboratory conditions. Continuous-flow pilot studies indicate that scale up residence times in created wetlands may be two to three times longer than in laboratory batch studies. The use of created wetlands and land farming techniques guided by rigorous field biochemistry and ecology promises to be a vital part of a newly evolving field, ecological engineering.« less

Phytoremediation of hazardous wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCutcheon, S.C.; Wolfe, N.L.; Carreria, L.H.

1995-11-01

A new and innovative approach to phytoremediation (the use of plants to degrade hazardous contaminants) was developed. The new approach to phytoremediation involves rigorous pathway analyses, mass balance determinations, and identification of specific enzymes that break down trinitrotoluene (TNT), other explosives (RDX and HMX), nitrobenzene, and chlorinated solvents (e.g., TCE and PCE) (EPA 1994). As a good example, TNT is completely and rapidly degraded by nitroreductase and laccase enzymes. The aromatic ring is broken and the carbon in the ring fragments is incorporated into new plant fiber, as part of the natural lignification process. Half lives for TNT degradation approachmore » 1 hr or less under ideal laboratory conditions. Continuous-flow pilot studies indicate that scale up residence times in created wetlands may be two to three times longer than in laboratory batch studies. The use of created wetlands and land farming techniques guided by rigorous field biochemistry and ecology promises to be a vital part of a newly evolving field, ecological engineering.« less

Natural Hazards and the press in the western Mediterranean region

NASA Astrophysics Data System (ADS)

Llasat-Botija, M.; Llasat, M. C.; López, L.

2007-07-01

This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

A study of the impact of moist-heat and dry-heat treatment processes on hazardous trace elements migration in food waste.

PubMed

Chen, Ting; Jin, Yiying; Qiu, Xiaopeng; Chen, Xin

2015-03-01

Using laboratory experiments, the authors investigated the impact of dry-heat and moist-heat treatment processes on hazardous trace elements (As, Hg, Cd, Cr, and Pb) in food waste and explored their distribution patterns for three waste components: oil, aqueous, and solid components. The results indicated that an insignificant reduction of hazardous trace elements in heat-treated waste-0.61-14.29% after moist-heat treatment and 4.53-12.25% after dry-heat treatment-and a significant reduction in hazardous trace elements (except for Hg without external addition) after centrifugal dehydration (P < 0.5). Moreover, after heat treatment, over 90% of the hazardous trace elements in the waste were detected in the aqueous and solid components, whereas only a trace amount of hazardous trace elements was detected in the oil component (<0.01%). In addition, results indicated that heat treatment process did not significantly reduce the concentration of hazardous trace elements in food waste, but the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk considerably. Finally, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment on the removal of external water-soluble ionic hazardous trace elements. An insignificant reduction of hazardous trace elements in heat-treated waste showed that heat treatment does not reduce trace elements contamination in food waste considerably, whereas the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk significantly. Moreover, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment for the removal of external water-soluble ionic hazardous trace elements, by exploring distribution patterns of trace elements in three waste components: oil, aqueous, and solid components.

The End-To-End Safety Verification Process Implemented to Ensure Safe Operations of the Columbus Research Module

NASA Astrophysics Data System (ADS)

Arndt, J.; Kreimer, J.

2010-09-01

The European Space Laboratory COLUMBUS was launched in February 2008 with NASA Space Shuttle Atlantis. Since successful docking and activation this manned laboratory forms part of the International Space Station(ISS). Depending on the objectives of the Mission Increments the on-orbit configuration of the COLUMBUS Module varies with each increment. This paper describes the end-to-end verification which has been implemented to ensure safe operations under the condition of a changing on-orbit configuration. That verification process has to cover not only the configuration changes as foreseen by the Mission Increment planning but also those configuration changes on short notice which become necessary due to near real-time requests initiated by crew or Flight Control, and changes - most challenging since unpredictable - due to on-orbit anomalies. Subject of the safety verification is on one hand the on orbit configuration itself including the hardware and software products, on the other hand the related Ground facilities needed for commanding of and communication to the on-orbit System. But also the operational products, e.g. the procedures prepared for crew and ground control in accordance to increment planning, are subject of the overall safety verification. In order to analyse the on-orbit configuration for potential hazards and to verify the implementation of the related Safety required hazard controls, a hierarchical approach is applied. The key element of the analytical safety integration of the whole COLUMBUS Payload Complement including hardware owned by International Partners is the Integrated Experiment Hazard Assessment(IEHA). The IEHA especially identifies those hazardous scenarios which could potentially arise through physical and operational interaction of experiments. A major challenge is the implementation of a Safety process which owns quite some rigidity in order to provide reliable verification of on-board Safety and which likewise provides enough flexibility which is desired by manned space operations with scientific objectives. In the period of COLUMBUS operations since launch already a number of lessons learnt could be implemented especially in the IEHA that allow to improve the flexibility of on-board operations without degradation of Safety.

Thermal explosion analysis of methyl ethyl ketone peroxide by non-isothermal and isothermal calorimetric applications.

PubMed

Chi, Jen-Hao; Wu, Sheng-Hung; Shu, Chi-Min

2009-11-15

In the past, process incidents attributed to organic peroxides (OPs) that involved near misses, over-pressures, runaway reactions, and thermal explosions occurred because of poor training, human error, incorrect kinetic assumptions, insufficient change management, and inadequate chemical knowledge in the manufacturing process. Calorimetric applications were employed broadly to test organic peroxides on a small-scale because of their thermal hazards, such as exothermic behavior and self-accelerating decomposition in the laboratory. In essence, methyl ethyl ketone peroxide (MEKPO) is highly reactive and exothermically unstable. In recent years, it has undergone many thermal explosions and runaway reaction incidents in the manufacturing process. Differential scanning calorimetry (DSC), vent sizing package 2 (VSP2), and thermal activity monitor (TAM) were employed to analyze thermokinetic parameters and safety index. The intent of the analyses was to facilitate the use of various auto-alarm equipments to detect over-pressure, over-temperature, and hazardous materials leaks for a wide spectrum of operations. Results indicated that MEKPO decomposition is detected at low temperatures (30-40 degrees C), and the rate of decomposition was shown to exponentially increase with temperature and pressure. Determining time to maximum rate (TMR), self-accelerating decomposition temperature (SADT), maximum temperature (T(max)), exothermic onset temperature (T(0)), and heat of decomposition (DeltaH(d)) was essential for identifying early-stage runaway reactions effectively for industries.

A perspective multidisciplinary geological approach for mitigation of effects due to the asbestos hazard

NASA Astrophysics Data System (ADS)

Vignaroli, Gianluca; Rossetti, Federico; Belardi, Girolamo; Billi, Andrea

2010-05-01

Asbestos-bearing rock sequences constitute a remarkable natural hazard that poses important threat to human health and may be at the origin of diseases such as asbestosis, mesothelioma and lung cancer). Presently, asbestos is classified as Category 1 carcinogen by world health authorities. Although regulatory agencies in many countries prohibit or restrict the use of asbestos, and discipline the environmental asbestos exposure, the impact of asbestos on human life still constitutes a major problem. Naturally occurring asbestos includes serpentine and amphibole minerals characterised by fibrous morphology and it is a constituent of mineralogical associations typical of mafic and ultramafic rocks within the ophiolitic sequences. Release of fibres can occur both through natural processes (erosion) and through human activities requiring fragmentation of ophiolite rocks (quarrying, tunnelling, railways construction, etc.). As a consequence, vulnerability is increasing in sites where workers and living people are involved by dispersion of fibres during mining and milling of ophiolitic rocks. By analysing in the field different exposures of ophiolitic sequences from the Italian peninsula and after an extensive review of the existing literature, we remark the importance of the geological context (origin, tectonic and deformation history) of ophiolites as a first-order parameter in evaluating the asbestos hazard. Integrated structural, textural, mineralogical and petrological studies significantly improve our understanding of the mechanisms governing the nucleation/growth of fibrous minerals in deformation structures (both ductile and brittle) within the ophiolitic rocks. A primary role is recognised in the structural processes favouring the fibrous mineralization, with correlation existing between the fibrous parameters (such as mineralogical composition, texture, mechanics characteristics) and the particles released in the air (such as shape, size, and amount liberated during rock fragmentation). Accordingly, we are confident that definition of an analytical protocol based on the geological attributes of the asbestos-bearing rocks may constitute a propaedeutical tool to evaluate the asbestos hazard in natural environments. This approach may have important implications for mitigation effects of the asbestos hazard from the medical field to the engineering operations.

Grand Junction projects office mixed-waste treatment program, VAC*TRAX mobile treatment unit process hazards analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloom, R.R.

1996-04-01

The objective of this report is to demonstrate that a thorough assessment of the risks associated with the operation of the Rust Geotech patented VAC*TRAX mobile treatment unit (MTU) has been performed and documented. The MTU was developed to treat mixed wastes at the US Department of Energy (DOE) Albuquerque Operations Office sites. The MTU uses an indirectly heated, batch vacuum dryer to thermally desorb organic compounds from mixed wastes. This process hazards analysis evaluated 102 potential hazards. The three significant hazards identified involved the inclusion of oxygen in a process that also included an ignition source and fuel. Changesmore » to the design of the MTU were made concurrent with the hazard identification and analysis; all hazards with initial risk rankings of 1 or 2 were reduced to acceptable risk rankings of 3 or 4. The overall risk to any population group from operation of the MTU was determined to be very low; the MTU is classified as a Radiological Facility with low hazards.« less

UNSAFE SEXUAL BEHAVIOUR ASSOCIATED WITH HAZARDOUS ALCOHOL USE AMONG STREET-INVOLVED YOUTH

PubMed Central

Fairbairn, Nadia; Wood, Evan; Dong, Huiru; Kerr, Thomas; DeBeck, Kora

2016-01-01

While risky sexual behaviours related to illicit drug use among street youth have been explored, the impacts of alcohol use have received less attention. This longitudinal study examined hazardous alcohol use among a population of street-involved youth, with particular attention to sexual and drug-related risk behaviours. Data were derived from the At-Risk Youth Study, a prospective cohort of street-involved youth in Vancouver, Canada. The outcome of interest was hazardous alcohol use defined by the US National Institute on Alcohol Abuse and Alcoholism. We used generalized estimating equations (GEEs) analyses to identify factors associated with hazardous alcohol use. Between 2005 and 2014, 1149 drug-using youth were recruited and 629 (55%) reported hazardous alcohol use in the previous 6 months during study follow-up. In multivariable GEE analyses, unprotected sex (adjusted odds ratio [AOR] = 1.28, 95% confidence interval [95% CI] = 1.12–1.46) and homelessness (AOR = 1.35, 95% CI = 1.19–1.54) were independently associated with hazardous alcohol use (all p < .001). Older age (AOR = 0.95, 95% CI = 0.92–0.99), Caucasian ethnicity (AOR = 0.74, 95% CI = 0.61–0.90), daily heroin use (AOR = 0.53, 95% CI = 0.42– 0.67), daily crack cocaine smoking (AOR = 0.73, 95% CI = 0.59–0.91), and daily crystal methamphetamine use (AOR = 0.52, 95% CI = 0.42–0.64) were negatively associated with hazardous alcohol use (all p < .05). In sub-analysis, consistent dose–response patterns were observed between levels of alcohol use and unprotected sex, homelessness, and daily heroin injection. In sum, hazardous alcohol use was positively associated with unsafe sexual behaviour and negatively associated with high-intensity drug use. Interventions to address hazardous alcohol use should be central to HIV prevention efforts for street-involved youth. PMID:27539676

Industrial Processes to Reduce Generation of Hazardous Waste at DoD facilities. Phase Report. Appendix A

DTIC Science & Technology

1985-12-01

ITASK IWORK UNIT Roo 2󈧆 DELEMENT NO. NO. NO. IACCESSION NO ~2sI DC tn 200061 1 ift E (include Security Classification) Industrit I Processes to Reduice...SCRT LSIIAINO HSPG Bes Av ia l ther editions are obsolete. I iN 1 ALSs I F1 1- Bs Available INDUSTRIAL PROCESSES TO REDUCE GENERATION OF HAZARDOUS...Defense (DOD) by CH2M HILL and PEER Consultants, Inc., for the purpose of reducing hazardous waste generation from DOD industrial processes . It is not

Safety Hazards During Intrahospital Transport: A Prospective Observational Study.

PubMed

Bergman, Lina M; Pettersson, Monica E; Chaboyer, Wendy P; Carlström, Eric D; Ringdal, Mona L

2017-10-01

To identify, classify, and describe safety hazards during the process of intrahospital transport of critically ill patients. A prospective observational study. Data from participant observations of the intrahospital transport process were collected over a period of 3 months. The study was undertaken at two ICUs in one university hospital. Critically ill patients transported within the hospital by critical care nurses, unlicensed nurses, and physicians. None. Content analysis was performed using deductive and inductive approaches. We detected a total of 365 safety hazards (median, 7; interquartile range, 4-10) during 51 intrahospital transports of critically ill patients, 80% of whom were mechanically ventilated. The majority of detected safety hazards were assessed as increasing the risk of harm, compromising patient safety (n = 204). Using the System Engineering Initiative for Patient Safety, we identified safety hazards related to the work system, as follows: team (n = 61), tasks (n = 83), tools and technologies (n = 124), environment (n = 48), and organization (n = 49). Inductive analysis provided an in-depth description of those safety hazards, contributing factors, and process-related outcomes. Findings suggest that intrahospital transport is a hazardous process for critically ill patients. We have identified several factors that may contribute to transport-related adverse events, which will provide the opportunity for the redesign of systems to enhance patient safety.

Hazard Interactions and Interaction Networks (Cascades) within Multi-Hazard Methodologies

NASA Astrophysics Data System (ADS)

Gill, Joel; Malamud, Bruce D.

2016-04-01

Here we combine research and commentary to reinforce the importance of integrating hazard interactions and interaction networks (cascades) into multi-hazard methodologies. We present a synthesis of the differences between 'multi-layer single hazard' approaches and 'multi-hazard' approaches that integrate such interactions. This synthesis suggests that ignoring interactions could distort management priorities, increase vulnerability to other spatially relevant hazards or underestimate disaster risk. We proceed to present an enhanced multi-hazard framework, through the following steps: (i) describe and define three groups (natural hazards, anthropogenic processes and technological hazards/disasters) as relevant components of a multi-hazard environment; (ii) outline three types of interaction relationship (triggering, increased probability, and catalysis/impedance); and (iii) assess the importance of networks of interactions (cascades) through case-study examples (based on literature, field observations and semi-structured interviews). We further propose visualisation frameworks to represent these networks of interactions. Our approach reinforces the importance of integrating interactions between natural hazards, anthropogenic processes and technological hazards/disasters into enhanced multi-hazard methodologies. Multi-hazard approaches support the holistic assessment of hazard potential, and consequently disaster risk. We conclude by describing three ways by which understanding networks of interactions contributes to the theoretical and practical understanding of hazards, disaster risk reduction and Earth system management. Understanding interactions and interaction networks helps us to better (i) model the observed reality of disaster events, (ii) constrain potential changes in physical and social vulnerability between successive hazards, and (iii) prioritise resource allocation for mitigation and disaster risk reduction.

Confronting ‘confounding by health system use’ in Medicare Part D: Comparative effectiveness of propensity score approaches to confounding adjustment

PubMed Central

Polinski, Jennifer M.; Schneeweiss, Sebastian; Glynn, Robert J.; Lii, Joyce; Rassen, Jeremy

2012-01-01

Purpose Under Medicare Part D, patient characteristics influence plan choice, which in turn influences Part D coverage gap entry. We compared pre-defined propensity score (PS) and high-dimensional propensity score (hdPS) approaches to address such ‘confounding by health system use’ in assessing whether coverage gap entry is associated with cardiovascular events or death. Methods We followed 243,079 Medicare patients aged 65+ with linked prescription, medical, and plan-specific data in 2005–2007. Patients reached the coverage gap and were followed until an event or year’s end. Exposed patients were responsible for drug costs in the gap; unexposed patients (patients with non-Part D drug insurance and Part D patients receiving a low-income subsidy (LIS)) received financial assistance. Exposed patients were 1:1 PS- or hdPS-matched to unexposed patients. The PS model included 52 predefined covariates; the hdPS model added 400 empirically identified covariates. Hazard ratios for death and any of five cardiovascular outcomes were compared. In sensitivity analyses, we explored residual confounding using only LIS patients in the unexposed group. Results In unadjusted analyses, exposed patients had no greater hazard of death (HR=1.00; 95% CI, 0.84–1.20) or other outcomes. PS- (HR=1.29;0.99–1.66) and hdPS- (HR=1.11;0.86–1.42) matched analyses showed elevated but non-significant hazards of death. In sensitivity analyses, the PS analysis showed a protective effect (HR=0.78;0.61–0.98), while the hdPS analysis (HR=1.06;0.82–1.37) confirmed the main hdPS findings. Conclusion Although the PS-matched analysis suggested elevated though non-significant hazards of death among patients with no financial assistance during the gap, the hdPS analysis produced lower estimates that were stable across sensitivity analyses. PMID:22552984

A new approach to the assessment of flooding and dampness hazards in cultural heritage, applied to the historic centre of Seville (Spain).

PubMed

Ortiz, Rocío; Ortiz, Pilar; Martín, José María; Vázquez, María Auxiliadora

2016-05-01

Flooding and dampness have caused considerable damage to historic towns and cities and have become more frequent in recent years. The aim of this paper is to analyse the hazards of flooding and dampness in historic cities to establish a methodology that prioritises preventive conservation actions and restorations. The case study concerns the historic centre of Seville (Spain) and parish churches built between the 13th and 18th centuries. Geographic information system (GIS) software has been used to assess hazards caused by flooding and dampness along with a Delphi consultation process surveying a multidisciplinary group of seven experts-archaeologists, geologists, chemists, architects, engineers and environmentalists-to gain a general overview of the hazards affecting each area of the city. Currently, the historic centre of Seville is at a very low risk of flooding due to the engineering works being undertaken to divert the river course. For flooding to occur, water levels would need to rise over 6 to 12m along the different sections of the defensive walls; as a result, the historic centre has not been flooded since 1961, when these defences broke. However, there is a continual presence of dampness due to the proximity of the river, the presence of underground water and the permeability of the subsoil, resulting in continual damage to the lower sections of the monuments studied. Hence, hazard maps of flooding and dampness need to be dovetailed. This new approach provides tools for decision-makers in the current crisis, allowing them to prioritise strategies that will minimise damage in a town, as the urban unit where territorial policies could be applied. Copyright © 2016 Elsevier B.V. All rights reserved.

Flood Risk in the Danube basin under climate change

NASA Astrophysics Data System (ADS)

Schröter, Kai; Wortmann, Michel; del Rocio Rivas Lopez, Maria; Liersch, Stefan; Viet Nguyen, Dung; Hardwick, Stephen; Hattermann, Fred

2017-04-01

The projected increase in temperature is expected to intensify the hydrological cycle, and thus more intense precipitation is likely to increase hydro-meteorological extremes and flood hazard. However to assess the future dynamics of hazard and impact induced by these changes it is necessary to consider extreme events and to take a spatially differentiated perspective. The Future Danube Model is a multi-hazard and risk model suite for the Danube region which has been developed in the OASIS project. The model comprises modules for estimating potential perils from heavy precipitation, heat-waves, floods, droughts, and damage risk considering hydro-climatic extremes under current and climate change conditions. Web-based open Geographic Information Systems (GIS) technology allows customers to graphically analyze and overlay perils and other spatial information such as population density or assets exposed. The Future Danube Model combines modules for weather generation, hydrological and hydrodynamic processes, and supports risk assessment and adaptation planning support. This contribution analyses changes in flood hazard in the Danube basin and in flood risk for the German part of the Danube basin. As climate change input, different regionalized climate ensemble runs of the newest IPCC generation are used, the so-called Representative Concentration Pathways (RCPs). They are delivered by the CORDEX initiative (Coordinated Downscaling Experiments). The CORDEX data sample is extended using the statistical weather generator (IMAGE) in order to also consider extreme events. Two time slices are considered: near future 2020-2049 and far future 2050-2079. This data provides the input for the hydrological, hydraulic and flood loss model chain. Results for RCP4.5 and RCP8.5 indicate an increase in intensity and frequency of peak discharges and thus in flood hazard for many parts of the Danube basin.

Moraine-dammed lake failures in Patagonia and assessment of outburst susceptibility in the Baker Basin

NASA Astrophysics Data System (ADS)

Iribarren Anacona, P.; Norton, K. P.; Mackintosh, A.

2014-07-01

Glacier retreat since the Little Ice Age has resulted in the development or expansion of hundreds of glacial lakes in Patagonia. Some of these lakes have produced large (≥106 m3) Glacial Lake Outburst Floods (GLOFs) damaging inhabited areas. GLOF hazard studies in Patagonia have been mainly based on the analysis of short-term series (≤50 years) of flood data and until now no attempt has been made to identify the relative susceptibility of lakes to failure. Power schemes and associated infrastructure are planned for Patagonian basins that have historically been affected by GLOFs, and we now require a thorough understanding of the characteristics of dangerous lakes in order to assist with hazard assessment and planning. In this paper, the conditioning factors of 16 outbursts from moraine dammed lakes in Patagonia were analysed. These data were used to develop a classification scheme designed to assess outburst susceptibility, based on image classification techniques, flow routine algorithms and the Analytical Hierarchy Process. This scheme was applied to the Baker Basin, Chile, where at least 7 moraine-dammed lakes have failed in historic time. We identified 386 moraine-dammed lakes in the Baker Basin of which 28 were classified with high or very high outburst susceptibility. Commonly, lakes with high outburst susceptibility are in contact with glaciers and have moderate (>8°) to steep (>15°) dam outlet slopes, akin to failed lakes in Patagonia. The proposed classification scheme is suitable for first-order GLOF hazard assessments in this region. However, rapidly changing glaciers in Patagonia make detailed analysis and monitoring of hazardous lakes and glaciated areas upstream from inhabited areas or critical infrastructure necessary, in order to better prepare for hazards emerging from an evolving cryosphere.

Moraine-dammed lake failures in Patagonia and assessment of outburst susceptibility in the Baker Basin

NASA Astrophysics Data System (ADS)

Iribarren Anacona, P.; Norton, K. P.; Mackintosh, A.

2014-12-01

Glacier retreat since the Little Ice Age has resulted in the development or expansion of hundreds of glacial lakes in Patagonia. Some of these lakes have produced large (≥ 106 m3) Glacial Lake Outburst Floods (GLOFs) damaging inhabited areas. GLOF hazard studies in Patagonia have been mainly based on the analysis of short-term series (≤ 50 years) of flood data and until now no attempt has been made to identify the relative susceptibility of lakes to failure. Power schemes and associated infrastructure are planned for Patagonian basins that have historically been affected by GLOFs, and we now require a thorough understanding of the characteristics of dangerous lakes in order to assist with hazard assessment and planning. In this paper, the conditioning factors of 16 outbursts from moraine-dammed lakes in Patagonia were analysed. These data were used to develop a classification scheme designed to assess outburst susceptibility, based on image classification techniques, flow routine algorithms and the Analytical Hierarchy Process. This scheme was applied to the Baker Basin, Chile, where at least seven moraine-dammed lakes have failed in historic time. We identified 386 moraine-dammed lakes in the Baker Basin of which 28 were classified with high or very high outburst susceptibility. Commonly, lakes with high outburst susceptibility are in contact with glaciers and have moderate (> 8°) to steep (> 15°) dam outlet slopes, akin to failed lakes in Patagonia. The proposed classification scheme is suitable for first-order GLOF hazard assessments in this region. However, rapidly changing glaciers in Patagonia make detailed analysis and monitoring of hazardous lakes and glaciated areas upstream from inhabited areas or critical infrastructure necessary, in order to better prepare for hazards emerging from an evolving cryosphere.

Safety Guided Design Based on Stamp/STPA for Manned Vehicle in Concept Design Phase

NASA Astrophysics Data System (ADS)

Ujiie, Ryo; Katahira, Masafumi; Miyamoto, Yuko; Umeda, Hiroki; Leveson, Nancy; Hoshino, Nobuyuki

2013-09-01

In manned vehicles, such as the Soyuz and the Space Shuttle, the crew and computer system cooperate to succeed in returning to the earth. While computers increase the functionality of system, they also increase the complexity of the interaction between the controllers (human and computer) and the target dynamics. In some cases, the complexity can produce a serious accident. To prevent such losses, traditional hazard analysis such as FTA has been applied to system development, however it can be used after creating a detailed system because it focuses on detailed component failures. As a result, it's more difficult to eliminate hazard cause early in the process when it is most feasible.STAMP/STPA is a new hazard analysis that can be applied from the early development phase, with the analysis being refined as more detailed decisions are made. In essence, the analysis and design decisions are intertwined and go hand-in-hand. We have applied STAMP/STPA to a concept design of a new JAXA manned vehicle and tried safety guided design of the vehicle. As a result of this trial, it has been shown that STAMP/STPA can be accepted easily by system engineers and the design has been made more sophisticated from a safety viewpoint. The result also shows that the consequences of human errors on system safety can be analysed in the early development phase and the system designed to prevent them. Finally, the paper will discuss an effective way to harmonize this safety guided design approach with system engineering process based on the result of this experience in this project.

Running to Safety: Analysis of Disaster Susceptibility of Neighborhoods and Proximity of Safety Facilities in Silay City, Philippines

NASA Astrophysics Data System (ADS)

Patiño, C. L.; Saripada, N. A.; Olavides, R. D.; Sinogaya, J.

2016-06-01

Going on foot is the most viable option when emergency responders fail to show up in disaster zones at the quickest and most reasonable time. In the Philippines, the efficacy of disaster management offices is hampered by factors such as, but not limited to, lack of equipment and personnel, distance, and/or poor road networks and traffic systems. In several instances, emergency response times exceed acceptable norms. This study explores the hazard susceptibility, particularly to fire, flood, and landslides, of neighborhoods vis-à-vis their proximity to safety facilities in Silay City, Philippines. Imbang River exposes communities in the city to flooding while the mountainous terrain makes the city landslide prone. Building extraction was done to get the possible human settlements in the city. The building structures were extracted through image processing using a ruleset-based approach in the process of segmentation and classification of LiDAR derivatives and ortho-photos. Neighborhoods were then identified whether they have low to high susceptibility to disaster risks in terms of floods and landslides based on the hazards maps obtained from the Philippines' Mines and Geosciences Bureau (MGB). Service area analyses were performed to determine the safety facilities available to different neighborhoods at varying running times. Locations which are inaccessible or are difficult to run to because of distance and corresponding hazards were determined. Recommendations are given in the form of infrastructure installation, relocation of facilities, safety equipment and vehicle procurement, and policy changes for specific areas in Silay City.

Hazards of solid waste management: bioethical problems, principles, and priorities

PubMed Central

Maxey, Margaret N.

1978-01-01

The putative hazards of solid waste management cannot be evaluated without placing the problem within a cultural climate of crisis where some persons consider such by-products of “high, hard technology” to have raised unresolved moral and ethical issues. In order to assist scientific and technical efforts to protect public health and safety, a bioethical perspective requires us to examine three controversial aspects of policy-making about public safety. Failure to recognize the qualitative difference between two cognitive activities—risk-measurements (objective, scientific probabilities) and safety-judgments (subjective, shifting value priorities)—has had three unfortunate consequences. Sophisticated methods of risk analysis have been applied in a piecemeal, haphazard, ad hoc fashion within traditional institutions with the false expectation that incremental risk-reducing programs automatically ensure public health and safety. Ethical priorities require, first and foremost, a whole new field of data arranged for comparable risk-analyses. Critics of cost/risk/benefit quantifications attack the absurdity of “putting a price on human life” but have not been confronted with its threefold ethical justification. The widening discrepancy in risk-perceptions and loss of mutual confidence between scientific experts and ordinary citizens has placed a burden of social responsibility on members of the scientific and technical community to engage in more effective public education through the political process, notwithstanding advocates of a nonscientific adversary process. The urgency of effective public education has been demonstrated by the extent to which we have lost our historically balanced judgment about the alleged environmental hazards posed by advanced technology. PMID:738238

36 CFR 218.12 - Timing of authorized hazardous fuel reduction project decision.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SERVICE, DEPARTMENT OF AGRICULTURE PREDECISIONAL ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects Authorized by the Healthy Forests Restoration...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romander, C.M.

The potential hazard of HCDA-generated missiles is analyzed, and the current status of the potential hazards of sodium fires is summarized. Simple analyses are performed to determine lower bounds on the HCDA energetics required to generate missiles that could reach the secondary containment structure of a 1000-MWe LMFBR. The potential missiles considered include the vessel head, components mounted on the head, and conrol rods.

Quantitative risk analysis of oil storage facilities in seismic areas.

PubMed

Fabbrocino, Giovanni; Iervolino, Iunio; Orlando, Francesca; Salzano, Ernesto

2005-08-31

Quantitative risk analysis (QRA) of industrial facilities has to take into account multiple hazards threatening critical equipment. Nevertheless, engineering procedures able to evaluate quantitatively the effect of seismic action are not well established. Indeed, relevant industrial accidents may be triggered by loss of containment following ground shaking or other relevant natural hazards, either directly or through cascade effects ('domino effects'). The issue of integrating structural seismic risk into quantitative probabilistic seismic risk analysis (QpsRA) is addressed in this paper by a representative study case regarding an oil storage plant with a number of atmospheric steel tanks containing flammable substances. Empirical seismic fragility curves and probit functions, properly defined both for building-like and non building-like industrial components, have been crossed with outcomes of probabilistic seismic hazard analysis (PSHA) for a test site located in south Italy. Once the seismic failure probabilities have been quantified, consequence analysis has been performed for those events which may be triggered by the loss of containment following seismic action. Results are combined by means of a specific developed code in terms of local risk contour plots, i.e. the contour line for the probability of fatal injures at any point (x, y) in the analysed area. Finally, a comparison with QRA obtained by considering only process-related top events is reported for reference.

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards

PubMed Central

Spector, Paul E.

2016-01-01

Background Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. Purpose To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Methods Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. Results The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. Discussion This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone. PMID:27110930

36 CFR 218.4 - Authorized hazardous fuel reduction projects not subject to objection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SERVICE, DEPARTMENT OF AGRICULTURE PREDECISIONAL ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects Authorized by the Healthy Forests Restoration...

Processed and unprocessed red meat consumption and incident type 2 diabetes among French women.

PubMed

Lajous, Martin; Tondeur, Laura; Fagherazzi, Guy; de Lauzon-Guillain, Blandine; Boutron-Ruaualt, Marie-Christine; Clavel-Chapelon, Françoise

2012-01-01

To evaluate the relation of processed and unprocessed red meat and incident type 2 diabetes. We conducted a prospective study among 66,118 disease-free French women with dietary information from a validated questionnaire. Between 1993 and 2007, we identified 1,369 cases of incident diabetes. Multivariate analyses were adjusted for age, education, region, smoking, BMI, hypertension, hypercholesterolemia, physical activity, parental history of diabetes, menopause, hormone replacement therapy, alcohol, calories, n-3 fatty acids, carbohydrates, coffee, fiber, and fruits and vegetables. Comparing the highest category of processed meat intake, ≥5 servings/week (median, 48 g/day), to the lowest, <1 serving/week (median, 5 g/day), processed meat was significantly associated with incident diabetes (hazard ratio 1.30 [95% CI 1.07-1.59], P trend = 0.0007; for 1 serving/day, 1.29 [1.14-1.45]). Unprocessed red meat was not associated with diabetes. In this large prospective cohort of French women, a direct association was observed only for processed red meat and type 2 diabetes.

Assessment and Survey of Potential Catastrophic Landslides by Using Geomorphometric Analysis

NASA Astrophysics Data System (ADS)

Hsieh, Yu-Chung; Hou, Chin-Shyong; Hu, Jyr-Ching; Chan, Yu-Chang; Fei, Li-Yuan; Chen, Hung-Jen; Chiu, Cheng-Lung

2013-04-01

In recent years, extreme weather events have induced more frequent geological hazards in Taiwan. The heavy rainfall brought by the Typhoon Morakot has triggered a large amount of landslides. The most unfortunate case occurred in the Hsiaolin village which was totally demolished by a catastrophic landslide in less than a minute. The study of such catastrophic landslides is urgently needed to mitigate loss of lives and properties in the future. Traditionally, the study of landslides usually includes shallow landslides, rockslide, and debris flow etc. and is commonly made use of satellite images, aerial photos, coupled with field surveys. It is considered that the creep phase of a landslide is a progressive stage of failure and gives sufficient signals before turning into a catastrophic landslide. Due to lack of high quality terrain data, however, the research of catastrophic landslides has been time consuming with often unsatisfactory results. This study used high-resolution airborne LiDAR-derived DEM data from the Central Geological Survey, MOEA. Different geomorphometric analyses were applied to process the high resolution and high accuracy DEM data including the hillshade, aspect, slope, eigenvalue ratio (ER) & openness. Among the geomorphometric analyses, combining the characteristics of openness, slope and hillshade gives a clear advantage to distinguish and analyze regions of potential catastrophic landslides in many cases. Statistical and image processing techniques to quantify morphological and other aspects of the terrain surface are also employed. Our results indicate that over hundreds of potential catastrophic landslides may present in southern Taiwan after the Typhoon Morakot event. The quantitative methods used in this study highlight the terrain features of the creep phase of catastrophic landslides and is helpful for landslide feature interpretation and hazard assessment.

Pareto frontier analyses based decision making tool for transportation of hazardous waste.

PubMed

Das, Arup; Mazumder, T N; Gupta, A K

2012-08-15

Transportation of hazardous wastes through a region poses immense threat on the development along its road network. The risk to the population, exposed to such activities, has been documented in the past. However, a comprehensive framework for routing hazardous wastes has often been overlooked. A regional Hazardous Waste Management scheme should incorporate a comprehensive framework for hazardous waste transportation. This framework would incorporate the various stakeholders involved in decision making. Hence, a multi-objective approach is required to safeguard the interest of all the concerned stakeholders. The objective of this study is to design a methodology for routing of hazardous wastes between the generating units and the disposal facilities through a capacity constrained network. The proposed methodology uses posteriori method with multi-objective approach to find non-dominated solutions for the system consisting of multiple origins and destinations. A case study of transportation of hazardous wastes in Kolkata Metropolitan Area has also been provided to elucidate the methodology. Copyright © 2012 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarrack, A.G.

The purpose of this report is to document fault tree analyses which have been completed for the Defense Waste Processing Facility (DWPF) safety analysis. Logic models for equipment failures and human error combinations that could lead to flammable gas explosions in various process tanks, or failure of critical support systems were developed for internal initiating events and for earthquakes. These fault trees provide frequency estimates for support systems failures and accidents that could lead to radioactive and hazardous chemical releases both on-site and off-site. Top event frequency results from these fault trees will be used in further APET analyses tomore » calculate accident risk associated with DWPF facility operations. This report lists and explains important underlying assumptions, provides references for failure data sources, and briefly describes the fault tree method used. Specific commitments from DWPF to provide new procedural/administrative controls or system design changes are listed in the ''Facility Commitments'' section. The purpose of the ''Assumptions'' section is to clarify the basis for fault tree modeling, and is not necessarily a list of items required to be protected by Technical Safety Requirements (TSRs).« less

Regional landslide hazard assesment for Kulon Progo Area, Central Java, Indonesia

NASA Astrophysics Data System (ADS)

Karnawati, D.

2009-12-01

Karanganyar region is situated in a dynamic volcanic region in Java Island, where rain-induced landslides are frequent and widespread. Shallow-rapid earth slides triggered by heavy rainfall are the most common landslide type occurring on the steep slope and had resulted in major casualties, whilst deep soil creeping is more prominant on the gentle slope which creat a lot of damages on the houses and infrastructure. A landslide hazard assessment had been conducted to support the landslide mitigation program in this region. Such assessment was carried out by applying a semi qualitative approach (Analytical Hierarchical Process) where a weighting system was applied to assess the level of importance of each controlling parameter as suggested by Saaty (1980). Existing conditions of each controlling parameters were also assessed based on relative hierarchical system by applying scoring. Geographical Information System was used as a tool in such analysis and mapping process. The isohyet map was also prepared from statistical and spatial analyses on rain fall data. Finally, two different scenarios of landslide hazard maps were established, i.e. the scenario without any rainfall (Scenario 1) and with the reainfall (Scenario 2). It was found that the most susceptible zone of landslide was localised on the steep slope (with the inclination beyond 45o ) of jointed andesitic breccia, which was covered by thinck silty clay and situated close to the stream zone (Scenario 1). However from the hazard map and analysis on scenario 2, it can be identified that the susceptible zone expanded larger due to the rainfall, covering most region of the west-slope area of Lawu Volcano. Therefore, it can be concluded that the rainfall intensity is very crucial to induce the landslide not only in the most susceptible zone, but also in the larger area which also include the less susceptbile zone. This findings is also crucial to support the development of landslide spatial-early-warning system in the region.

40 CFR 68.67 - Process hazard analysis.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.67 Process hazard analysis. (a... instrumentation with alarms, and detection hardware such as hydrocarbon sensors.); (4) Consequences of failure of...

40 CFR 68.67 - Process hazard analysis.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.67 Process hazard analysis. (a... instrumentation with alarms, and detection hardware such as hydrocarbon sensors.); (4) Consequences of failure of...

Automatic landslide detection from LiDAR DTM derivatives by geographic-object-based image analysis based on open-source software

NASA Astrophysics Data System (ADS)

Knevels, Raphael; Leopold, Philip; Petschko, Helene

2017-04-01

With high-resolution airborne Light Detection and Ranging (LiDAR) data more commonly available, many studies have been performed to facilitate the detailed information on the earth surface and to analyse its limitation. Specifically in the field of natural hazards, digital terrain models (DTM) have been used to map hazardous processes such as landslides mainly by visual interpretation of LiDAR DTM derivatives. However, new approaches are striving towards automatic detection of landslides to speed up the process of generating landslide inventories. These studies usually use a combination of optical imagery and terrain data, and are designed in commercial software packages such as ESRI ArcGIS, Definiens eCognition, or MathWorks MATLAB. The objective of this study was to investigate the potential of open-source software for automatic landslide detection based only on high-resolution LiDAR DTM derivatives in a study area within the federal state of Burgenland, Austria. The study area is very prone to landslides which have been mapped with different methodologies in recent years. The free development environment R was used to integrate open-source geographic information system (GIS) software, such as SAGA (System for Automated Geoscientific Analyses), GRASS (Geographic Resources Analysis Support System), or TauDEM (Terrain Analysis Using Digital Elevation Models). The implemented geographic-object-based image analysis (GEOBIA) consisted of (1) derivation of land surface parameters, such as slope, surface roughness, curvature, or flow direction, (2) finding optimal scale parameter by the use of an objective function, (3) multi-scale segmentation, (4) classification of landslide parts (main scarp, body, flanks) by k-mean thresholding, (5) assessment of the classification performance using a pre-existing landslide inventory, and (6) post-processing analysis for the further use in landslide inventories. The results of the developed open-source approach demonstrated good success rates to objectively detect landslides in high-resolution topography data by GEOBIA.

36 CFR 218.3 - Authorized hazardous fuel reduction projects subject to objection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SERVICE, DEPARTMENT OF AGRICULTURE PREDECISIONAL ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects Authorized by the Healthy Forests Restoration..., the objection process of this part applies to both the plan amendment and the project. ...

Hazardous Waste: Cleanup and Prevention.

ERIC Educational Resources Information Center

Vandas, Steve; Cronin, Nancy L.

1996-01-01

Discusses hazardous waste, waste disposal, unsafe exposure, movement of hazardous waste, and the Superfund clean-up process that consists of site discovery, site assessment, clean-up method selection, site clean up, and site maintenance. Argues that proper disposal of hazardous waste is everybody's responsibility. (JRH)

40 CFR 266.112 - Regulation of residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... constituents (toxic constituents) that could reasonably be attributable to the hazardous waste at... processing the hazardous waste (constituents of concern) include toxic constituents in the hazardous waste... shall not be excluded from the definition of a hazardous waste. Concentrations of toxic constituents of...

40 CFR 266.112 - Regulation of residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... constituents (toxic constituents) that could reasonably be attributable to the hazardous waste at... processing the hazardous waste (constituents of concern) include toxic constituents in the hazardous waste... shall not be excluded from the definition of a hazardous waste. Concentrations of toxic constituents of...

40 CFR 266.112 - Regulation of residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

... constituents (toxic constituents) that could reasonably be attributable to the hazardous waste at... processing the hazardous waste (constituents of concern) include toxic constituents in the hazardous waste... shall not be excluded from the definition of a hazardous waste. Concentrations of toxic constituents of...

Suitability of energy cone for probabilistic volcanic hazard assessment: validation tests at Somma-Vesuvius and Campi Flegrei (Italy)

NASA Astrophysics Data System (ADS)

Tierz, Pablo; Sandri, Laura; Costa, Antonio; Zaccarelli, Lucia; Di Vito, Mauro Antonio; Sulpizio, Roberto; Marzocchi, Warner

2016-11-01

Pyroclastic density currents (PDCs) are gravity-driven hot mixtures of gas and volcanic particles which can propagate at high speed and cover distances up to several tens of kilometers around a given volcano. Therefore, they pose a severe hazard to the surroundings of explosive volcanoes able to produce such phenomena. Despite this threat, probabilistic volcanic hazard assessment (PVHA) of PDCs is still in an early stage of development. PVHA is rooted in the quantification of the large uncertainties (aleatory and epistemic) which characterize volcanic hazard analyses. This quantification typically requires a big dataset of hazard footprints obtained from numerical simulations of the physical process. For PDCs, numerical models range from very sophisticated (not useful for PVHA because of their very long runtimes) to very simple models (criticized because of their highly simplified physics). We present here a systematic and robust validation testing of a simple PDC model, the energy cone (EC), to unravel whether it can be applied to PVHA of PDCs. Using past PDC deposits at Somma-Vesuvius and Campi Flegrei (Italy), we assess the ability of EC to capture the values and variability in some relevant variables for hazard assessment, i.e., area of PDC invasion and maximum runout. In terms of area of invasion, the highest Jaccard coefficients range from 0.33 to 0.86 which indicates an equal or better performance compared to other volcanic mass-flow models. The p values for the observed maximum runouts vary from 0.003 to 0.44. Finally, the frequencies of PDC arrival computed from the EC are similar to those determined from the spatial distribution of past PDC deposits, with high PDC-arrival frequencies over an ˜8-km radius from the crater area at Somma-Vesuvius and around the Astroni crater at Campi Flegrei. The insights derived from our validation tests seem to indicate that the EC is a suitable candidate to compute PVHA of PDCs.

Purification process for .sup.153Gd produced in natural europium targets

DOEpatents

Johnsen, Amanda M; Soderquist, Chuck Z; McNamara, Bruce K; Risher, Darrell R

2013-04-23

An alteration of the traditional zinc/zinc-amalgam reduction procedure which eliminates both the hazardous mercury and dangerous hydrogen gas generation. In order to avoid the presence of water and hydrated protons in the working solution, which can oxidize Eu.sup.2+ and cause hydrogen gas production, a process utilizing methanol as the process solvent is described. While methanol presents some flammability hazard in a radiological hot cell, it can be better managed and is less of a flammability hazard than hydrogen gas generation.

Revising time series of the Elbe river discharge for flood frequency determination at gauge Dresden

NASA Astrophysics Data System (ADS)

Bartl, S.; Schümberg, S.; Deutsch, M.

2009-11-01

The German research programme RIsk MAnagment of eXtreme flood events has accomplished the improvement of regional hazard assessment for the large rivers in Germany. Here we focused on the Elbe river at its gauge Dresden, which belongs to the oldest gauges in Europe with officially available daily discharge time series beginning on 1 January 1890. The project on the one hand aimed to extend and to revise the existing time series, and on the other hand to examine the variability of the Elbe river discharge conditions on a greater time scale. Therefore one major task were the historical searches and the examination of the retrieved documents and the contained information. After analysing this information the development of the river course and the discharge conditions were discussed. Using the provided knowledge, in an other subproject, a historical hydraulic model was established. Its results then again were used here. A further purpose was the determining of flood frequency based on all pre-processed data. The obtained knowledge about historical changes was also used to get an idea about possible future variations under climate change conditions. Especially variations in the runoff characteristic of the Elbe river over the course of the year were analysed. It succeeded to obtain a much longer discharge time series which contain fewer errors and uncertainties. Hence an optimized regional hazard assessment was realised.

[Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

PubMed

Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

2015-12-01

To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

The Framework of a Coastal Hazards Model - A Tool for Predicting the Impact of Severe Storms

USGS Publications Warehouse

Barnard, Patrick L.; O'Reilly, Bill; van Ormondt, Maarten; Elias, Edwin; Ruggiero, Peter; Erikson, Li H.; Hapke, Cheryl; Collins, Brian D.; Guza, Robert T.; Adams, Peter N.; Thomas, Julie

2009-01-01

The U.S. Geological Survey (USGS) Multi-Hazards Demonstration Project in Southern California (Jones and others, 2007) is a five-year project (FY2007-FY2011) integrating multiple USGS research activities with the needs of external partners, such as emergency managers and land-use planners, to produce products and information that can be used to create more disaster-resilient communities. The hazards being evaluated include earthquakes, landslides, floods, tsunamis, wildfires, and coastal hazards. For the Coastal Hazards Task of the Multi-Hazards Demonstration Project in Southern California, the USGS is leading the development of a modeling system for forecasting the impact of winter storms threatening the entire Southern California shoreline from Pt. Conception to the Mexican border. The modeling system, run in real-time or with prescribed scenarios, will incorporate atmospheric information (that is, wind and pressure fields) with a suite of state-of-the-art physical process models (that is, tide, surge, and wave) to enable detailed prediction of currents, wave height, wave runup, and total water levels. Additional research-grade predictions of coastal flooding, inundation, erosion, and cliff failure will also be performed. Initial model testing, performance evaluation, and product development will be focused on a severe winter-storm scenario developed in collaboration with the Winter Storm Working Group of the USGS Multi-Hazards Demonstration Project in Southern California. Additional offline model runs and products will include coastal-hazard hindcasts of selected historical winter storms, as well as additional severe winter-storm simulations based on statistical analyses of historical wave and water-level data. The coastal-hazards model design will also be appropriate for simulating the impact of storms under various sea level rise and climate-change scenarios. The operational capabilities of this modeling system are designed to provide emergency planners with the critical information they need to respond quickly and efficiently and to increase public safety and mitigate damage associated with powerful coastal storms. For instance, high resolution local models will predict detailed wave heights, breaking patterns, and current strengths for use in warning systems for harbor-mouth navigation and densely populated coastal regions where beach safety is threatened. The offline applications are intended to equip coastal managers with the information needed to manage and allocate their resources effectively to protect sections of coast that may be most vulnerable to future severe storms.

RCRA Sustainable Materials Management Information

EPA Pesticide Factsheets

This asset includes a broad variety of documents, descriptive data, technical analyses and guidance materials relative to voluntary improvements in resource conservation, the beneficial use of sustainable materials and the management of non-hazardous wastes and materials. Included in this asset are participant information and outreach materials of various voluntary programs relating to better materials and waste management programs. An example is the WasteWise program and Sustainable Materials Management (SMM) Challenges, which help organizations and businesses apply sustainable materials management practices to reduce municipal and select industrial wastes. Also included in this asset are guidance materials to assist municipalities in recycling and reuse of municipal solid waste, including diverting materials to composting, and the use of conversion methods such as anaerobic digestion. Another component are the data necessary to compile reports on the characterization of municipal solid waste (including such waste streams as food waste, yard and wood waste, discarded electronics, and household non-hazardous waste), the recycled content of manufactured goods, and other analyses performed using such tools as the Waste Assessment Reduction Model (WARM).For industrial non-hazardous waste, this asset includes guidance and outreach materials on industrial materials recycling and waste minimization. Finally, this asset includes research analyses on sustainable materia

Impact of community disadvantage and air pollution burden on geographic disparities of ovarian cancer survival in California.

PubMed

Vieira, Verónica M; Villanueva, Carolina; Chang, Jenny; Ziogas, Argyrios; Bristow, Robert E

2017-07-01

Ovarian cancer survival varies geographically throughout California. The objective of this study is to determine the impact of living in disadvantaged communities on spatial patterns of survival disparities. Including a bivariate spatial smooth of geographic location within the Cox proportional hazard models is an effective approach for spatial analyses of cancer survival. Women diagnosed with advanced Stage IIIC/IV epithelial ovarian cancer (1996-2006) were identified from the California Cancer Registry. The impact of living in disadvantaged communities, as measured by the California Office of Environmental Health Hazard Assessment cumulative CalEnviroScreen 2.0 score, on geographic disparities in survival was assessed while controlling for age, tumor characteristics, quality of care, and race. Community-level air quality indicators and socioeconomic status (SES) were also independently examined in secondary analyses. The Cox proportional hazard spatial methods are available in the MapGAM package implemented in R. An increase in the community disadvantage from the 5th (less disadvantage) to the 95th percentile (more disadvantage) was significantly associated with poorer ovarian cancer survival (hazard ratio [HR], 1.16; 95% confidence interval [CI], 1.07-1.26). Ozone levels and SES were the most influential indicators on geographic disparities that warrant further investigation. The use of a bivariate smoother of location within the survival model allows for more advanced spatial analyses for exploring potential air quality-related predictors of geographic disparities. Copyright © 2017. Published by Elsevier Inc.

Health Insurance Trajectories and Long-Term Survival After Heart Transplantation.

PubMed

Tumin, Dmitry; Foraker, Randi E; Smith, Sakima; Tobias, Joseph D; Hayes, Don

2016-09-01

Health insurance status at heart transplantation influences recipient survival, but implications of change in insurance for long-term outcomes are unclear. Adults aged 18 to 64 receiving first-time orthotopic heart transplants between July 2006 and December 2013 were identified in the United Network for Organ Sharing registry. Patients surviving >1 year were categorized according to trajectory of insurance status (private compared with public) at wait listing, transplantation, and 1-year follow-up. The most common insurance trajectories were continuous private coverage (44%), continuous public coverage (27%), and transition from private to public coverage (11%). Among patients who survived to 1 year (n=9088), continuous public insurance (hazard ratio =1.36; 95% confidence interval 1.19, 1.56; P<0.001) and transition from private to public insurance (hazard ratio =1.25; 95% confidence interval 1.04, 1.50; P=0.017) were associated with increased mortality hazard relative to continuous private insurance. Supplementary analyses of 11 247 patients included all durations of post-transplant survival and examined post-transplant private-to-public and public-to-private transitions as time-varying covariates. In these analyses, transition from private to public insurance was associated with increased mortality hazard (hazard ratio =1.25; 95% confidence interval 1.07, 1.47; P=0.005), whereas transition from public to private insurance was associated with lower mortality hazard (hazard ratio =0.78; 95% confidence interval 0.62, 0.97; P=0.024). Transition from private to public insurance after heart transplantation is associated with worse long-term outcomes, compounding disparities in post-transplant survival attributed to insurance status at transplantation. By contrast, post-transplant gain of private insurance among patients receiving publicly funded heart transplants was associated with improved outcomes. © 2016 American Heart Association, Inc.

16 CFR 1051.5 - Requirements and recommendations for petitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... injury data; or a research study); and (5) Contain an explicit request to initiate Commission rulemaking... hazardous product; and (3) Supply or reference any known documentation, engineering studies, technical studies, reports of injuries, medical findings, legal analyses, economic analyses and environmental impact...

16 CFR 1051.5 - Requirements and recommendations for petitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... injury data; or a research study); and (5) Contain an explicit request to initiate Commission rulemaking... hazardous product; and (3) Supply or reference any known documentation, engineering studies, technical studies, reports of injuries, medical findings, legal analyses, economic analyses and environmental impact...

Mechanochemical processing of molybdenum and vanadium sulfides for metal recovery from spent catalysts wastes.

PubMed

Li, Zhao; Chen, Min; Zhang, Qiwu; Liu, Xinzhong; Saito, Fumio

2017-02-01

This work describes the mechanochemical transformations of molybdenum and vanadium sulfides into corresponding molybdate and vanadate, to serve as a new environment-friendly approach for processing hazardous spent hydrodesulphurization (HDS) catalysts solid waste to achieve an easy recovery of not only molybdenum and vanadium but also nickel and cobalt. Co-grinding the molybdenum and vanadium sulfides with oxidants and sodium carbonate stimulates solid-state reactions without any heating aid to form metal molybdates and vanadates. The reactions proceed with an increase in grinding time and were enhanced by using more sodium carbonate and stronger oxidant. The necessary conditions for the successful transformation can be explained on the basis of thermodynamic analyses, namely a negative change in Gibbs free energy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Natural hazard fatalities in Switzerland from 1946 to 2015

NASA Astrophysics Data System (ADS)

Badoux, Alexandre; Andres, Norina; Techel, Frank; Hegg, Christoph

2016-12-01

A database of fatalities caused by natural hazard processes in Switzerland was compiled for the period between 1946 and 2015. Using information from the Swiss flood and landslide damage database and the Swiss destructive avalanche database, the data set was extended back in time and more hazard processes were added by conducting an in-depth search of newspaper reports. The new database now covers all natural hazards common in Switzerland, categorised into seven process types: flood, landslide, rockfall, lightning, windstorm, avalanche and other processes (e.g. ice avalanches, earthquakes). Included were all fatal accidents associated with natural hazard processes in which victims did not expose themselves to an important danger on purpose. The database contains information on 635 natural hazard events causing 1023 fatalities, which corresponds to a mean of 14.6 victims per year. The most common causes of death were snow avalanches (37 %), followed by lightning (16 %), floods (12 %), windstorms (10 %), rockfall (8 %), landslides (7 %) and other processes (9 %). About 50 % of all victims died in one of the 507 single-fatality events; the other half were killed in the 128 multi-fatality events. The number of natural hazard fatalities that occurred annually during our 70-year study period ranged from 2 to 112 and exhibited a distinct decrease over time. While the number of victims in the first three decades (until 1975) ranged from 191 to 269 per decade, it ranged from 47 to 109 in the four following decades. This overall decrease was mainly driven by a considerable decline in the number of avalanche and lightning fatalities. About 75 % of victims were males in all natural hazard events considered together, and this ratio was roughly maintained in all individual process categories except landslides (lower) and other processes (higher). The ratio of male to female victims was most likely to be balanced when deaths occurred at home (in or near a building), a situation that mainly occurred in association with landslides and avalanches. The average age of victims of natural hazards was 35.9 years and, accordingly, the age groups with the largest number of victims were the 20-29 and 30-39 year-old groups, which in combination represented 34 % of all fatalities. It appears that the overall natural hazard mortality rate in Switzerland over the past 70 years has been relatively low in comparison to rates in other countries or rates of other types of fatal accidents in Switzerland. However, a large variability in mortality rates was observed within the country with considerably higher rates in Alpine environments.

Work and retirement among a cohort of older men in the United States, 1966-1983.

PubMed

Hayward, M D; Grady, W R

1990-08-01

Multivariate increment-decrement working life tables are estimated for a cohort of older men in the United States for the period 1966-1983. The approach taken allows multiple processes to be simultaneously incorporated into a single model, resulting in a more realistic portrayal of a cohort's late-life labor force behavior. In addition, because the life table model is developed from multivariate hazard equations, we identify the effects of sociodemographic characteristics on the potentially complex process by which the labor force career is ended. In contrast to the assumed homogeneity of previous working life table analyses, the present study shows marked differences in labor force mobility and working and nonworking life expectancy according to occupation, class of worker, education, race, and marital status. We briefly discuss the implications of these findings for inequities of access to retirement, private and public pension consumption, and future changes in the retirement process.

Water dissociation in a radio-frequency electromagnetic field with ex situ electrodes—decomposition of perfluorooctanoic acid and tetrahydrofuran

NASA Astrophysics Data System (ADS)

Schneider, Jens; Holzer, Frank; Kraus, Markus; Kopinke, Frank-Dieter; Roland, Ulf

2016-10-01

The application of radio waves with a frequency of 13.56 MHz on electrolyte solutions in a capillary reactor led to the formation of reactive hydrogen and oxygen species and finally to molecular oxygen and hydrogen. This process of water splitting can be principally used for the elimination of hazardous chemicals in water. Two compounds, namely perfluorooctanoic acid (PFOA) and tetrahydrofuran, were converted using this process. Their main decomposition products were highly volatile and therefore transferred to a gas phase, where they could be identified by GC-MS analyses. It is remarkable that the chemical reactions could benefit from both the oxidizing and reducing species formed in the plasma process, which takes place in gas bubbles saturated with water vapor. The breaking of C-C and C-F bonds was proven in the case of PFOA, probably initiated by electron impacts and radical reactions.

Integrate urban‐scale seismic hazard analyses with the U.S. National Seismic Hazard Model

USGS Publications Warehouse

Moschetti, Morgan P.; Luco, Nicolas; Frankel, Arthur; Petersen, Mark D.; Aagaard, Brad T.; Baltay, Annemarie S.; Blanpied, Michael; Boyd, Oliver; Briggs, Richard; Gold, Ryan D.; Graves, Robert; Hartzell, Stephen; Rezaeian, Sanaz; Stephenson, William J.; Wald, David J.; Williams, Robert A.; Withers, Kyle

2018-01-01

For more than 20 yrs, damage patterns and instrumental recordings have highlighted the influence of the local 3D geologic structure on earthquake ground motions (e.g., M">M 6.7 Northridge, California, Gao et al., 1996; M">M 6.9 Kobe, Japan, Kawase, 1996; M">M 6.8 Nisqually, Washington, Frankel, Carver, and Williams, 2002). Although this and other local‐scale features are critical to improving seismic hazard forecasts, historically they have not been explicitly incorporated into the U.S. National Seismic Hazard Model (NSHM, national model and maps), primarily because the necessary basin maps and methodologies were not available at the national scale. Instead,...

Safety in earth orbit study. Volume 2: Analysis of hazardous payloads, docking, on-board survivability

NASA Technical Reports Server (NTRS)

1972-01-01

Detailed and supporting analyses are presented of the hazardous payloads, docking, and on-board survivability aspects connected with earth orbital operations of the space shuttle program. The hazards resulting from delivery, deployment, and retrieval of hazardous payloads, and from handling and transport of cargo between orbiter, sortie modules, and space station are identified and analyzed. The safety aspects of shuttle orbiter to modular space station docking includes docking for assembly of space station, normal resupply docking, and emergency docking. Personnel traffic patterns, escape routes, and on-board survivability are analyzed for orbiter with crew and passenger, sortie modules, and modular space station, under normal, emergency, and EVA and IVA operations.

Establishing a proactive safety and health risk management system in the fire service.

PubMed

Poplin, Gerald S; Pollack, Keshia M; Griffin, Stephanie; Day-Nash, Virginia; Peate, Wayne F; Nied, Ed; Gulotta, John; Burgess, Jefferey L

2015-04-19

Formalized risk management (RM) is an internationally accepted process for reducing hazards in the workplace, with defined steps including hazard scoping, risk assessment, and implementation of controls, all within an iterative process. While required for all industry in the European Union and widely used elsewhere, the United States maintains a compliance-based regulatory structure, rather than one based on systematic, risk-based methodologies. Firefighting is a hazardous profession, with high injury, illness, and fatality rates compared with other occupations, and implementation of RM programs has the potential to greatly improve firefighter safety and health; however, no descriptions of RM implementation are in the peer-reviewed literature for the North American fire service. In this paper we describe the steps used to design and implement the RM process in a moderately-sized fire department, with particular focus on prioritizing and managing injury hazards during patient transport, fireground, and physical exercise procedures. Hazard scoping and formalized risk assessments are described, in addition to the identification of participatory-led injury control strategies. Process evaluation methods were conducted to primarily assess the feasibility of voluntarily instituting the RM approach within the fire service setting. The RM process was well accepted by the fire department and led to development of 45 hazard specific-interventions. Qualitative data documenting the implementation of the RM process revealed that participants emphasized the: value of the RM process, especially the participatory bottom-up approach; usefulness of the RM process for breaking down tasks to identify potential risks; and potential of RM for reducing firefighter injury. As implemented, this risk-based approach used to identify and manage occupational hazards and risks was successful and is deemed feasible for U.S. (and other) fire services. While several barriers and challenges do exist in the implementation of any intervention such as this, recommendations for adopting the process are provided. Additional work will be performed to determine the effectiveness of select controls strategies that were implemented; however participants throughout the organizational structure perceived the RM process to be of high utility while researchers also found the process improved the awareness and engagement in actively enhancing worker safety and health.

Accident analysis and control options in support of the sludge water system safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

HEY, B.E.

A hazards analysis was initiated for the SWS in July 2001 (SNF-8626, K Basin Sludge and Water System Preliminary Hazard Analysis) and updated in December 2001 (SNF-10020 Rev. 0, Hazard Evaluation for KE Sludge and Water System - Project A16) based on conceptual design information for the Sludge Retrieval System (SRS) and 60% design information for the cask and container. SNF-10020 was again revised in September 2002 to incorporate new hazards identified from final design information and from a What-if/Checklist evaluation of operational steps. The process hazards, controls, and qualitative consequence and frequency estimates taken from these efforts have beenmore » incorporated into Revision 5 of HNF-3960, K Basins Hazards Analysis. The hazards identification process documented in the above referenced reports utilized standard industrial safety techniques (AIChE 1992, Guidelines for Hazard Evaluation Procedures) to systematically guide several interdisciplinary teams through the system using a pre-established set of process parameters (e.g., flow, temperature, pressure) and guide words (e.g., high, low, more, less). The teams generally included representation from the U.S. Department of Energy (DOE), K Basins Nuclear Safety, T Plant Nuclear Safety, K Basin Industrial Safety, fire protection, project engineering, operations, and facility engineering.« less

Educational inequality in cardiovascular diseases: a sibling approach.

PubMed

Søndergaard, Grethe; Dalton, Susanne Oksbjerg; Mortensen, Laust Hvas; Osler, Merete

2018-02-01

Educational inequality in diseases in the circulatory system (here termed cardiovascular disease) is well documented but may be confounded by early life factors. The aim of this observational study was to examine whether the associations between education and all cardiovascular diseases, ischaemic heart disease and stroke, respectively, were explained by family factors shared by siblings. The study population included all individuals born in Denmark between 1950 and 1979 who had at least one full sibling born in the same period. Using Cox regression, data were analysed in conventional cohort and within-sibship analyses in which the association was examined within siblings discordant on education. Assuming that attenuation of associations in the within-sibship as compared with the cohort analyses would indicate confounding from factors shared within families. A lower educational status was associated with a higher risk of cardiovascular disease, ischaemic heart disease and stroke. All associations attenuated in the within-sibship analyses, in particular in the analyses on ischaemic heart disease before age 45 years. For instance, in the cohort analyses, the hazard rate of ischaemic heart disease among women less than 45 years who had a primary school education was 94% (hazard ratio 1.94 (1.78-2.12) higher than among those with a vocational education, while it attenuated to 51% (hazard ratio 1.51 (1.34-1.71)) in the within-sibship analysis. Confounding from factors shared by siblings explained the associations between education and the cardiovascular disease outcomes but to varying degrees. This should be taken into account when planning interventions aimed at reducing educational inequalities in the development of cardiovascular disease, ischaemic heart disease and stroke.

40 CFR 63.9580 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This... standards for hazardous air pollutants (NESHAP) for taconite iron ore processing. This subpart also...

40 CFR 63.9580 - What is the purpose of this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This... standards for hazardous air pollutants (NESHAP) for taconite iron ore processing. This subpart also...

40 CFR 63.9580 - What is the purpose of this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This... standards for hazardous air pollutants (NESHAP) for taconite iron ore processing. This subpart also...

40 CFR 63.9580 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This... standards for hazardous air pollutants (NESHAP) for taconite iron ore processing. This subpart also...

40 CFR 63.9580 - What is the purpose of this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This... standards for hazardous air pollutants (NESHAP) for taconite iron ore processing. This subpart also...

Hazard analysis and critical control point evaluation of school food programs in Bahrain.

PubMed

Ali, A A; Spencer, N J

1996-03-01

Hazard analyses were conducted in six food preparation sites and 16 school canteens in the State of Bahrain. Sandwiches made with cheese, meat, eggs, liver, and beef burgers were prepared in small shops or a bakery outside schools. Foods were cooked between 4 and 5 A.M. Time-temperature exposure during cooking was adequate to kill vegetative microbes and their spores, but potential for recontamination existed from the hands of food workers, utensils, and cloths and sponges used for wiping. All foods were left at room temperature before they were transported in vans to schools where they were also kept at room temperature between 17 degrees C and 41 degrees C. Air temperature inside the canteens during this investigation was between 18.5 and 28 degrees C with a relative humidity of 65 to 70%. Hazard analyses, which included observation of operations inside school canteens and sites of food preparation, measuring temperatures, and interviewing workers and consumers (teachers, students) were carried out. Hazards were primarily associated with preparation of foods long before they were consumed, physical touching of products, and holding foods at room temperature after preparation. Holding foods at room temperature would have allowed germination of bacterial spores and multiplication of microbes. Reheating of foods was not practiced. Health promoters must be aware of these hazards and need to educate food workers, administrators, and the public on the methods of prevention.

Estimation of hazard function and its associated factors in gastric cancer patients using wavelet and kernel smoothing methods.

PubMed

Ahmadi, Azadeh; Roudbari, Masoud; Gohari, Mahmood Reza; Hosseini, Bistoon

2012-01-01

Increase of mortality rates of gastric cancer in Iran and the world in recent years reveal necessity of studies on this disease. Here, hazard function for gastric cancer patients was estimated using Wavelet and Kernel methods and some related factors were assessed. Ninety- five gastric cancer patients in Fayazbakhsh Hospital between 1996 and 2003 were studied. The effects of age of patients, gender, stage of disease and treatment method on patient's lifetime were assessed. For data analyses, survival analyses using Wavelet method and Log-rank test in R software were used. Nearly 25.3% of patients were female. Fourteen percent had surgery treatment and the rest had treatment without surgery. Three fourths died and the rest were censored. Almost 9.5% of patients were in early stages of the disease, 53.7% in locally advance stage and 36.8% in metastatic stage. Hazard function estimation with the wavelet method showed significant difference for stages of disease (P<0.001) and did not reveal any significant difference for age, gender and treatment method. Only stage of disease had effects on hazard and most patients were diagnosed in late stages of disease, which is possibly one of the most reasons for high hazard rate and low survival. Therefore, it seems to be necessary a public education about symptoms of disease by media and regular tests and screening for early diagnosis.

Hazardous Waste Permitting

EPA Pesticide Factsheets

To provide RCRA hazardous waste permitting regulatory information and resources permitted facilities, hazardous waste generators, and permit writers. To provide the public with information on how they can be involved in the permitting process.

Evaluation of silvicultural treatments and biomass use for reducing fire hazard in western states

Treesearch

Kenneth E. Skog; R. James Barbour; Karen L. Abt; E.M. (Ted) Bilek; Frank Burch; Roger D. Fight; Robert J. Hugget; Patrick D. Miles; Elizabeth D. Reinhardt; Wayne D. Shepperd

2006-01-01

Several analyses have shown that fire hazard is a concern for substantial areas of forestland, shrubland, grassland, and range in the western United States. In response, broadscale management strategies, such as the National Fire Plan, established actions to reduce the threat of undesirable fire. Available budgets are insufficient to pay for vegetative management on...

Defining hazards of supplemental oxygen therapy in neonatology using the FMEA tool.

PubMed

van der Eijk, Anne Catherine; Rook, Denise; Dankelman, Jenny; Smit, Bert Johan

2013-01-01

To prospectively evaluate hazards in the process of supplemental oxygen therapy in very preterm infants hospitalized in a Dutch NICU. A Failure Mode and Effects Analysis (FMEA) was conducted by a multidisciplinary team. This team identified, evaluated, and prioritized hazards of supplemental oxygen therapy in preterm infants. After accrediting "hazard scores" for each step in this process, recommendations were formulated for the main hazards. Performing the FMEA took seven meetings of 2 hours. The top 10 hazards could all be categorized into three main topics: incorrect adjustment of the fraction of inspired oxygen (FiO2), incorrect alarm limits for SpO2, and incorrect pulse-oximetry alarm limits on patient monitors for temporary use. The FMEA culminated in recommendations in both educational and technical directions. These included suggestions for (changes in) protocols on alarm limits and manual FiO2 adjustments, education of NICU staff on hazards of supplemental oxygen, and technical improvements in respiratory devices and patient monitors. The FMEA prioritized flaws in the process of supplemental oxygen therapy in very preterm infants. Thanks to the structured approach of the analysis by a multidisciplinary team, several recommendations were made. These recommendations are currently implemented in the study's center.

RCRA, superfund and EPCRA hotline training module. Introduction to: Hazardous waste identification (40 cfr part 261) updated July 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The module introduces a specific hazardous waste identification process, which involves asking and analyzing a series of questions about any waste being evaluated. It analyzes in detail the Resource Conservation and Recovery Act (RCRA) definition of `hazardous waste.` It explains concepts that are essential to identifying a RCRA hazardous waste: hazardous waste listing, hazardous waste characteristics, the `mixture` and `derived-from` rules, the `contained-in` policy, and the hazardous waste identification rules (HWIR).

Using a 3D CAD plant model to simplify process hazard reviews

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolpa, G.

A Hazard and Operability (HAZOP) review is a formal predictive procedure used to identify potential hazard and operability problems associated with certain processes and facilities. The HAZOP procedure takes place several times during the life cycle of the facility. Replacing plastic models, layout and detail drawings with a 3D CAD electronic model, provides access to process safety information and a detailed level of plant topology that approaches the visualization capability of the imagination. This paper describes the process that is used for adding the use of a 3D CAD model to flowsheets and proven computer programs for the conduct ofmore » hazard and operability reviews. Using flowsheets and study nodes as a road map for the review the need for layout and other detail drawings is all but eliminated. Using the 3D CAD model again for a post-P and ID HAZOP supports conformance to layout and safety requirements, provides superior visualization of the plant configuration and preserves the owners equity in the design. The response from the review teams are overwhelmingly in favor of this type of review over a review that uses only drawings. Over the long term the plant model serves more than just process hazards analysis. Ongoing use of the model can satisfy the required access to process safety information, OHSA documentation and other legal requirements. In this paper extensive instructions address the logic for the process hazards analysis and the preparation required to assist anyone who wishes to add the use of a 3D model to their review.« less

Risk analysis based on hazards interactions

NASA Astrophysics Data System (ADS)

Rossi, Lauro; Rudari, Roberto; Trasforini, Eva; De Angeli, Silvia; Becker, Joost

2017-04-01

Despite an increasing need for open, transparent, and credible multi-hazard risk assessment methods, models, and tools, the availability of comprehensive risk information needed to inform disaster risk reduction is limited, and the level of interaction across hazards is not systematically analysed. Risk assessment methodologies for different hazards often produce risk metrics that are not comparable. Hazard interactions (consecutive occurrence two or more different events) are generally neglected, resulting in strongly underestimated risk assessment in the most exposed areas. This study presents cases of interaction between different hazards, showing how subsidence can affect coastal and river flood risk (Jakarta and Bandung, Indonesia) or how flood risk is modified after a seismic event (Italy). The analysis of well documented real study cases, based on a combination between Earth Observation and in-situ data, would serve as basis the formalisation of a multi-hazard methodology, identifying gaps and research frontiers. Multi-hazard risk analysis is performed through the RASOR platform (Rapid Analysis and Spatialisation Of Risk). A scenario-driven query system allow users to simulate future scenarios based on existing and assumed conditions, to compare with historical scenarios, and to model multi-hazard risk both before and during an event (www.rasor.eu).

Characterizing the nature and variability of avalanche hazard in western Canada

NASA Astrophysics Data System (ADS)

Shandro, Bret; Haegeli, Pascal

2018-04-01

The snow and avalanche climate types maritime, continental and transitional are well established and have been used extensively to characterize the general nature of avalanche hazard at a location, study inter-seasonal and large-scale spatial variabilities and provide context for the design of avalanche safety operations. While researchers and practitioners have an experience-based understanding of the avalanche hazard associated with the three climate types, no studies have described the hazard character of an avalanche climate in detail. Since the 2009/2010 winter, the consistent use of Statham et al. (2017) conceptual model of avalanche hazard in public avalanche bulletins in Canada has created a new quantitative record of avalanche hazard that offers novel opportunities for addressing this knowledge gap. We identified typical daily avalanche hazard situations using self-organizing maps (SOMs) and then calculated seasonal prevalence values of these situations. This approach produces a concise characterization that is conducive to statistical analyses, but still provides a comprehensive picture that is informative for avalanche risk management due to its link to avalanche problem types. Hazard situation prevalence values for individual seasons, elevations bands and forecast regions provide unprecedented insight into the inter-seasonal and spatial variability of avalanche hazard in western Canada.

Uncertainties in predicting debris flow hazards following wildfire [Chapter 19

Treesearch

Kevin D. Hyde; Karin Riley; Cathelijne Stoof

2017-01-01

Wildfire increases the probability of debris flows posing hazardous conditions where values‐at‐risk exist downstream of burned areas. Conditions and processes leading to postfire debris flows usually follow a general sequence defined here as the postfire debris flow hazard cascade: biophysical setting, fire processes, fire effects, rainfall, debris flow, and values‐at‐...

Ground Water Issue: Phytoremediation of Contaminated Soil and Ground Water at Hazardous Waste Sites

DTIC Science & Technology

2001-02-01

Development Ground Water Issue Phytoremediation of Contaminated Soil and Ground Water at Hazardous Waste Sites National Risk Management Research... Phytoremediation , the use of plants in remediation, is one such technology. This issue paper focuses on the processes and applications of phytoremediation ...of phytoremediation as a cleanup or containment technique for remediation of hazardous waste sites. Introductory material on plant processes is

Human vulnerability, dislocation and resettlement: adaptation processes of river-bank erosion-induced displacees in Bangladesh.

PubMed

Hutton, David; Haque, C Emdad

2004-03-01

The purpose of this research was to identify and analyse patterns of economic and social adaptation among river-bank erosion-induced displacees in Bangladesh. It was hypothesised that the role of social demographic and socio-economic variables in determining the coping ability and recovery of the river-bank erosion-induced displacees is quite significant. The findings of the research reveal that displacees experience substantial socio-economic impoverishment and marginalisation as a consequence of involuntary migration. This in part is a socially constructed process, reflecting inequitable access to land and other resources. Vulnerability to disasters is further heightened by a number of identifiable social and demographic factors including gender, education and age, although extreme poverty and marginalisation create complexity to isolate the relative influence of these variables. The need to integrate hazard analysis and mitigation with the broader economic and social context is discussed. It is argued that the capacity of people to respond to environmental threats is a function of not only the physical forces which affect them, but also of underlying economic and social relationships which increase human vulnerability to risk. Hazard analysis and mitigation can be more effective when it takes into account such social and demographic and socio-economic dimensions of disasters.

Electromagnetic Spectrum Test and Evaluation Process

DTIC Science & Technology

2010-01-01

HERO , hazards of electromagnetic radiation to ordnance ; HERP, hazards of electromagnetic radiation to personnel; HERF, hazards of electromagnetic ... electromagnetic pulse (EMP); electronic protection; electrostatic dis- charge (ESD); hazards of electromagnetic radi- ation to personnel (HERP), ordnance ...including ordnance containing electrically initiated devices, to be mutually compatible in their intended

Himalayan Glacier Disasters: Changing Geomorphological Process Landscape, or a Changing Human Landscape?

NASA Astrophysics Data System (ADS)

Kargel, J. S.; Leonard, G. J.

2012-12-01

Recent deadly glacier-related disasters in the Himalayan-Karakoram region—the Attabad landslide and formation of glacier meltwater-fed Lake Gojal, the Gayari ice avalanche/landslide and burial of a Pakistani Army base, and the Seti River outburst disaster—beg the question of whether disasters may be on the rise. Science is not yet ready to offer a full answer, but it is an important one to resolve, because future land-use planning and mitigative measures may be affected. Natural disasters have been commonplace throughout the long human history of the Himalaya-Karakoram region. The broad outlines of the changing natural process, natural hazard, and risk environment may be established. The risk is rising rapidly primarily due to increased human presence in these once-forbidding mountains. Risk is shifting also because climate change is modifying the land surface process system. Rapidly changing glaciers cause a destabilization of the landscape. Glaciers are fundamentally a mestastable phenomenon put in motion by the high gravitational potential energies of the components of glacial systems: snow, ice, water, and debris. Any change in the climate-land-glacier system MUST result in a change in the land process system, with hazards and risks rising or falling or changing location or type. Most commonly, glacier-related disasters include a natural process cascade; as the factors affecting land surface processes and the frequency or magnitude of any one of the elements of the process cascade changes, the net hazard and risk to people changes. Otherwise similar glaciers and glacierized basins have differing sets of hazardous conditions and processes depending on whether the glacier is stable, advancing or retreating. The consequences for the overall risk to people will depend on the details of a specific glacier near a particular village or bridge or railroad. One size does not fit all. Generalizations about trends in natural hazards as related to climate change impacts on glaciers are possible, but any particular locality may buck the general trends. Hence, climate change is affecting the natural process, natural hazard, and human risk environment. However, changing glaciers exhibit a montage of different response behaviors, so the natural hazards and shifting hazards are also a montage. Overwhelmingly, changing land use has the largest impact on the natural hazard and risk environment. We will take recent examples of natural disasters--using both remote sensing data and field data-- and discuss how changing climate, the changing cryosphere, and changing human relationships to the land in Himalayan realms may have contributed to or altered those events.

Identification of Potential Hazard using Hazard Identification and Risk Assessment

NASA Astrophysics Data System (ADS)

Sari, R. M.; Syahputri, K.; Rizkya, I.; Siregar, I.

2017-03-01

This research was conducted in the paper production’s company. These Paper products will be used as a cigarette paper. Along in the production’s process, Company provides the machines and equipment that operated by workers. During the operations, all workers may potentially injured. It known as a potential hazard. Hazard identification and risk assessment is one part of a safety and health program in the stage of risk management. This is very important as part of efforts to prevent occupational injuries and diseases resulting from work. This research is experiencing a problem that is not the identification of potential hazards and risks that would be faced by workers during the running production process. The purpose of this study was to identify the potential hazards by using hazard identification and risk assessment methods. Risk assessment is done using severity criteria and the probability of an accident. According to the research there are 23 potential hazard that occurs with varying severity and probability. Then made the determination Risk Assessment Code (RAC) for each potential hazard, and gained 3 extreme risks, 10 high risks, 6 medium risks and 3 low risks. We have successfully identified potential hazard using RAC.

Mortality in HIV-Infected Alcohol and Drug Users in St. Petersburg, Russia.

PubMed

Fairbairn, Nadia S; Walley, Alexander Y; Cheng, Debbie M; Quinn, Emily; Bridden, Carly; Chaisson, Christine; Blokhina, Elena; Lioznov, Dmitry; Krupitsky, Evgeny; Raj, Anita; Samet, Jeffrey H

2016-01-01

In Russia, up to half of premature deaths are attributed to hazardous drinking. The respective roles of alcohol and drug use in premature death among people with HIV in Russia have not been described. Criminalization and stigmatization of substance use in Russia may also contribute to mortality. We explored whether alcohol, drug use and risk environment factors are associated with short-term mortality in HIV-infected Russians who use substances. Secondary analyses were conducted using prospective data collected at baseline, 6 and 12-months from HIV-infected people who use substances recruited between 2007-2010 from addiction and HIV care settings in a single urban setting of St. Petersburg, Russia. We used Cox proportional hazards models to explore associations between 30-day alcohol hazardous drinking, injection drug use, polysubstance use and environmental risk exposures (i.e. past incarceration, police involvement, selling sex, and HIV stigma) with mortality. Among 700 participants, 59% were male and the mean age was 30 years. There were 40 deaths after a median follow-up of 12 months (crude mortality rate 5.9 per 100 person-years). In adjusted analyses, 30-day NIAAA hazardous drinking was significantly associated with mortality compared to no drinking [adjusted Hazard Ratio (aHR) 2.60, 95% Confidence Interval (CI): 1.24-5.44] but moderate drinking was not (aHR 0.95, 95% CI: 0.35-2.59). No other factors were significantly associated with mortality. The high rates of short-term mortality and the strong association with hazardous drinking suggest a need to integrate evidence-based alcohol interventions into treatment strategies for HIV-infected Russians.

Applying Qualitative Hazard Analysis to Support Quantitative Safety Analysis for Proposed Reduced Wake Separation Conops

NASA Technical Reports Server (NTRS)

Shortle, John F.; Allocco, Michael

2005-01-01

This paper describes a scenario-driven hazard analysis process to identify, eliminate, and control safety-related risks. Within this process, we develop selective criteria to determine the applicability of applying engineering modeling to hypothesized hazard scenarios. This provides a basis for evaluating and prioritizing the scenarios as candidates for further quantitative analysis. We have applied this methodology to proposed concepts of operations for reduced wake separation for closely spaced parallel runways. For arrivals, the process identified 43 core hazard scenarios. Of these, we classified 12 as appropriate for further quantitative modeling, 24 that should be mitigated through controls, recommendations, and / or procedures (that is, scenarios not appropriate for quantitative modeling), and 7 that have the lowest priority for further analysis.

76 FR 65779 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR... special permit is published in accordance with Part 107 of the Federal hazardous materials transportation...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

36 CFR 218.5 - Giving notice of proposed authorized hazardous fuel reduction projects subject to objection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PREDECISIONAL ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects Authorized by the Healthy... subject to the objection process pursuant to 36 CFR part 218, subpart A, and include the following: (i...

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1999-07-20

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1998-03-24

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Composition and process for the encapsulation and stabilization of radioactive hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1997-01-01

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Impact of Contextual Factors on Prostate Cancer Risk and Outcomes

DTIC Science & Technology

2013-07-01

framework with random effects (“frailty models”) while the case-control analyses (Aim 4) will use multilevel unconditional logistic regression models...contextual-level SES on prostate cancer risk within racial/ethnic groups. The survival analyses (Aims 1-3) will utilize a proportional hazards regression

78 FR 13097 - Electric Power Research Institute; Seismic Evaluation Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... outcrop motion for which the soil layers above the foundation elevation have been removed. Updating the... performing soil-structure interaction analyses. Consistent with guidance described in DC/COL-ISG-017, ``Ensuring Hazard-Consistent Seismic Input for Site Response and Soil Structure Interaction Analyses,'' the...

Meat, eggs, dairy products, and risk of breast cancer in the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort.

PubMed

Pala, Valeria; Krogh, Vittorio; Berrino, Franco; Sieri, Sabina; Grioni, Sara; Tjønneland, Anne; Olsen, Anja; Jakobsen, Marianne Uhre; Overvad, Kim; Clavel-Chapelon, Françoise; Boutron-Ruault, Marie-Christine; Romieu, Isabelle; Linseisen, Jakob; Rohrmann, Sabine; Boeing, Heiner; Steffen, Annika; Trichopoulou, Antonia; Benetou, Vassiliki; Naska, Androniki; Vineis, Paolo; Tumino, Rosario; Panico, Salvatore; Masala, Giovanna; Agnoli, Claudia; Engeset, Dagrun; Skeie, Guri; Lund, Eiliv; Ardanaz, Eva; Navarro, Carmen; Sánchez, Maria-José; Amiano, Pilar; Svatetz, Carlos Alberto Gonzalez; Rodriguez, Laudina; Wirfält, Elisabet; Manjer, Jonas; Lenner, Per; Hallmans, Göran; Peeters, Petra H M; van Gils, Carla H; Bueno-de-Mesquita, H Bas; van Duijnhoven, Fränzel J B; Key, Timothy J; Spencer, Elizabeth; Bingham, Sheila; Khaw, Kay-Tee; Ferrari, Pietro; Byrnes, Graham; Rinaldi, Sabina; Norat, Teresa; Michaud, Dominique S; Riboli, Elio

2009-09-01

A Western diet is associated with breast cancer risk. We investigated the relation of meat, egg, and dairy product consumption with breast cancer risk by using data from the European Prospective Investigation into Cancer and Nutrition (EPIC). Between 1992 and 2003, information on diet was collected from 319,826 women. Disease hazard ratios were estimated with multivariate Cox proportional hazard models. Breast cancer cases (n = 7119) were observed during 8.8 y (median) of follow-up. No consistent association was found between breast cancer risk and the consumption of any of the food groups under study, when analyzed by both categorical and continuous exposure variable models. High processed meat consumption was associated with a modest increase in breast cancer risk in the categorical model (hazard ratio: 1.10; 95% CI: 1.00, 1.20; highest compared with lowest quintile: P for trend = 0.07). Subgroup analyses suggested an association with butter consumption, limited to premenopausal women (hazard ratio: 1.28; 95% CI: 1.06, 1.53; highest compared with lowest quintile: P for trend = 0.21). Between-country heterogeneity was found for red meat (Q statistic = 18.03; P = 0.05) and was significantly explained (P = 0.023) by the proportion of meat cooked at high temperature. We have not consistently identified intakes of meat, eggs, or dairy products as risk factors for breast cancer. Future studies should investigate the possible role of high-temperature cooking in the relation of red meat intake with breast cancer risk.

Post-Challenger evaluation of space shuttle risk assessment and management

NASA Technical Reports Server (NTRS)

1988-01-01

As the shock of the Space Shuttle Challenger accident began to subside, NASA initiated a wide range of actions designed to ensure greater safety in various aspects of the Shuttle system and an improved focus on safety throughout the National Space Transportation System (NSTS) Program. Certain specific features of the NASA safety process are examined: the Critical Items List (CIL) and the NASA review of the Shuttle primary and backup units whose failure might result in the loss of life, the Shuttle vehicle, or the mission; the failure modes and effects analyses (FMEA); and the hazard analysis and their review. The conception of modern risk management, including the essential element of objective risk assessment is described and it is contrasted with NASA's safety process in general terms. The discussion, findings, and recommendations regarding particular aspects of the NASA STS safety assurance process are reported. The 11 subsections each deal with a different aspect of the process. The main lessons learned by SCRHAAC in the course of the audit are summarized.

Methodologies for the assessment of earthquake-triggered landslides hazard. A comparison of Logistic Regression and Artificial Neural Network models.

NASA Astrophysics Data System (ADS)

García-Rodríguez, M. J.; Malpica, J. A.; Benito, B.

2009-04-01

In recent years, interest in landslide hazard assessment studies has increased substantially. They are appropriate for evaluation and mitigation plan development in landslide-prone areas. There are several techniques available for landslide hazard research at a regional scale. Generally, they can be classified in two groups: qualitative and quantitative methods. Most of qualitative methods tend to be subjective, since they depend on expert opinions and represent hazard levels in descriptive terms. On the other hand, quantitative methods are objective and they are commonly used due to the correlation between the instability factors and the location of the landslides. Within this group, statistical approaches and new heuristic techniques based on artificial intelligence (artificial neural network (ANN), fuzzy logic, etc.) provide rigorous analysis to assess landslide hazard over large regions. However, they depend on qualitative and quantitative data, scale, types of movements and characteristic factors used. We analysed and compared an approach for assessing earthquake-triggered landslides hazard using logistic regression (LR) and artificial neural networks (ANN) with a back-propagation learning algorithm. One application has been developed in El Salvador, a country of Central America where the earthquake-triggered landslides are usual phenomena. In a first phase, we analysed the susceptibility and hazard associated to the seismic scenario of the 2001 January 13th earthquake. We calibrated the models using data from the landslide inventory for this scenario. These analyses require input variables representing physical parameters to contribute to the initiation of slope instability, for example, slope gradient, elevation, aspect, mean annual precipitation, lithology, land use, and terrain roughness, while the occurrence or non-occurrence of landslides is considered as dependent variable. The results of the landslide susceptibility analysis are checked using landslide location data. These results show a high concordance between the landslide inventory and the high susceptibility estimated zone with an adjustment of 95.1 % for ANN model and 89.4% for LR model. In addition, we make a comparative analysis of both techniques using the Receiver Operating Characteristic (ROC) curve, a graphical plot of the sensitivity vs. (1 - specificity) for a binary classifier system in function of its discrimination threshold, and calculating the Area Under the ROC (AUROC) value for each model. Finally, the previous models are used for the developing a new probabilistic landslide hazard map for future events. They are obtained combining the expected triggering factor (calculated earthquake ground motion) for a return period of 475 years with the susceptibility map.

Safety in earth orbit study. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

1972-01-01

A summary of the technical results and conclusions is presented of the hazards analyses of earth orbital operations in conjunction with the space shuttle program. The space shuttle orbiter and a variety of manned and unmanned payloads delivered to orbit by the shuttle are considered. The specific safety areas examined are hazardous payloads, docking, on-orbit survivability, tumbling spacecraft, and escape and rescue.

Multidisciplinary Geo-scientific Hazard Analyses: Istanbul Microzonation Projects

NASA Astrophysics Data System (ADS)

Kara, Sema; Baş, Mahmut; Kılıç, Osman; Tarih, Ahmet; Yahya Menteşe, Emin; Duran, Kemal

2017-04-01

Istanbul (Turkey) is located on the west edge of North Anatolia Fault and hence is an earthquake prone city with a population that exceeds 15 million people. In addition, the city is still growing as center of commerce, tourism and culture that increases the exposure more and more. During the last decade, although Istanbul grew faster than ever in its history, precautions against a possible earthquake have also increased steadily. The two big earthquakes (in Kocaeli and Duzce Provinces) occurred in 1999 alongside Istanbul and these events became the trigger events that accelerated the disaster risk reduction activities in Istanbul. Following a loss estimation study carried out by Japanese International Cooperation Agency (JICA) in 2001 and Istanbul Earthquake Master Plan prepared by four major universities' researchers in 2003; it was evaluated that understanding and analyzing the geological structure in Istanbul was the main concern. Thereafter Istanbul Metropolitan Municipality's Directorate of Earthquake and Ground Research (DEGRE) carried out two major geo-scientific studies called "microzonation studies" covering 650 km2 of Istanbul's urbanized areas between 2006 and 2009. The studies were called "microzonation" because the analysis resolution was as dense as 250m grids and included various assessments on hazards such as ground shaking, liquefaction, karstification, landslide, flooding, and surface faulting. After the evaluation of geological, geotechnical and geophysical measurements; Earthquake and Tsunami Hazard Maps for all Istanbul, slope, engineering geology, ground water level, faulting, ground shaking, inundation, shear wave velocity and soil classification maps for the project areas were obtained. In the end "Land Suitability Maps" are derived from the combination of inputs using multi-hazard approach. As a result, microzonation is tool for risk oriented urban planning; consisting of interdisciplinary multi-hazard risk analyses. The outputs of microzonation are used in land development/use plans, hazard identification in urban transformation, determination of the routes and characteristics of various types of engineering structures such as highways, tunnels, bridges, railroads, viaducts and ports. Hence, by the use of detailed geo-scientific analyses, basics of earthquake resilient urbanization is guaranteed.

Rockfall Hazard Process Assessment : [Project Summary

DOT National Transportation Integrated Search

2017-10-01

The Montana Department of Transportation (MDT) implemented its Rockfall Hazard Rating System (RHRS) between 2003 and 2005, obtaining information on the state's rock slopes and their associated hazards. The RHRS data facilitated decision-making in an ...

49 CFR 175.25 - Notification at air passenger facilities of hazardous materials restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... restrictions on hazardous materials in baggage. (d) Signage. When the check in process is not conducted... permitted and forbidden hazardous materials may be completed through signage (electronic or otherwise...

Common Carotid Artery Diameter and Risk of Cardiovascular Events and Mortality: Pooled Analyses of Four Cohort Studies.

PubMed

Sedaghat, Sanaz; van Sloten, Thomas T; Laurent, Stéphane; London, Gérard M; Pannier, Bruno; Kavousi, Maryam; Mattace-Raso, Francesco; Franco, Oscar H; Boutouyrie, Pierre; Ikram, M Arfan; Stehouwer, Coen D A

2018-05-21

Carotid arterial diameter enlargement is a manifestation of arterial remodeling and may be a risk factor for cardiovascular disease (CVD). We evaluated the association between carotid artery diameter and risk of stroke, coronary heart disease, CVD, and all-cause mortality and explored whether the associations could be explained by processes involved in arterial remodeling, that is, blood pressure-related media thickening, arterial stiffness, arterial wall stress, and atherosclerosis. We included 4887 participants (mean age 67±9 years; 54% women) from 4 cohort studies: Rotterdam Study, NEPHROTEST, Hoorn Study, and a study by Blacher et al. Common carotid artery properties were measured using echotracking. Incident cases were recorded based on medical records. We used Cox proportional hazard models adjusting for cardiovascular risk factors and estimates of processes underlying arterial remodeling. During follow-up (mean, 11 years), 379 (8%) individuals had a stroke, 516 had a (11%) coronary heart disease, 807 had a (17%) CVD, and 1486 (30%) had died. After adjustment for cardiovascular risk factors, individuals in the highest tertile of carotid diameter (diameter >8 mm) compared with those in the lowest tertile (diameter <7 mm) had a higher incidence of stroke (hazard ratio, 1.5; 95% confidence interval, 1.1-2.0). From all estimates of processes underlying arterial remodeling, adjustment for carotid intima-media thickness attenuated this association (hazard ratio after adjustment for intima-media thickness, 1.2; 95% confidence interval, 0.9-1.6). Larger carotid diameter was associated with risk of CVD and mortality but not clearly with coronary heart disease risk. We showed that a larger carotid diameter is associated with incident stroke, CVD, and mortality. Carotid intima-media thickness, a measure of blood pressure-related media thickening, partially explained the association with stroke incidence. © 2018 American Heart Association, Inc.

RCRA/UST, superfund and EPCRA hotline training module. Introduction to: Hazardous waste identification (40 CFR part 261) updated as of July 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-11-01

This module introduces a specific hazardous waste identification process, which involves asking and analyzing a series of questions about any waste being evaluated. Analyzes in detail the Resource Conservation and Recovery Act (RCRA) definition of hazardous waste. It explains the following concepts that are essential to identifying a RCRA hazardous waste: hazardous waste listing, hazardous waste characteristics, the mixture and derived-from rules, the contained-in policy, and the Hazardous Waste Identification Rule (HWIR).

Prediction and perception of hazards in professional drivers: Does hazard perception skill differ between safe and less-safe fire-appliance drivers?

PubMed

Crundall, David; Kroll, Victoria

2018-05-18

Can hazard perception testing be useful for the emergency services? Previous research has found emergency response drivers' (ERDs) to perform better than controls, however these studies used clips of normal driving. In contrast, the current study filmed footage from a fire-appliance on blue-light training runs through Nottinghamshire, and endeavoured to discriminate between different groups of EDRs based on experience and collision risk. Thirty clips were selected to create two variants of the hazard perception test: a traditional push-button test requiring speeded-responses to hazards, and a prediction test that occludes at hazard onset and provides four possible outcomes for participants to choose between. Three groups of fire-appliance drivers (novices, low-risk experienced and high-risk experienced), and age-matched controls undertook both tests. The hazard perception test only discriminated between controls and all FA drivers, whereas the hazard prediction test was more sensitive, discriminating between high and low-risk experienced fire appliance drivers. Eye movement analyses suggest that the low-risk drivers were better at prioritising the hazardous precursors, leading to better predictive accuracy. These results pave the way for future assessment and training tools to supplement emergency response driver training, while supporting the growing literature that identifies hazard prediction as a more robust measure of driver safety than traditional hazard perception tests. Copyright © 2018 Elsevier Ltd. All rights reserved.

Logistic Regression in the Identification of Hazards in Construction

NASA Astrophysics Data System (ADS)

Drozd, Wojciech

2017-10-01

The construction site and its elements create circumstances that are conducive to the formation of risks to safety during the execution of works. Analysis indicates the critical importance of these factors in the set of characteristics that describe the causes of accidents in the construction industry. This article attempts to analyse the characteristics related to the construction site, in order to indicate their importance in defining the circumstances of accidents at work. The study includes sites inspected in 2014 - 2016 by the employees of the District Labour Inspectorate in Krakow (Poland). The analysed set of detailed (disaggregated) data includes both quantitative and qualitative characteristics. The substantive task focused on classification modelling in the identification of hazards in construction and identifying those of the analysed characteristics that are important in an accident. In terms of methodology, resource data analysis using statistical classifiers, in the form of logistic regression, was the method used.

Examination of associations between risky driving behaviors and hazardous drinking among a sample of college students.

PubMed

Martin, Ryan J; Cox, Melissa J; Chaney, Beth H; Knowlden, Adam P

2018-06-21

Hazardous drinking is associated with other risky behaviors and negative health-related outcomes. This study examined co-variation between hazardous drinking scores and the following risky driving behaviors: falling asleep while driving, texting (receiving and sending) while driving, and driving after consuming alcohol. The participants in this study were a sample of undergraduate students (N = 1,298) who were enrolled in an introductory health course at a large, Southeastern university in Spring 2016 and completed an online health survey that assessed hazardous drinking, falling asleep while driving, texting while driving, and driving after consuming alcohol. We conducted a series of two-step regression analyses to examine co-variation between hazardous drinking scores (using the AUDIT-C) and the risky driving behaviors of interest. We found that the majority of participants did not drink and drive (91.8%) nor did they fall asleep while driving (80.4%); however, the majority did read a text while driving (81.7%) and sent a text while driving (75.3%). In the full multivariable model, hazardous drinking score was positively associated with drinking and driving (Step 2 OR = 1.28, 95% CI: 1.18, 1.38) and sending a text message while driving (Step 2 b = 0.19, p = .01). Hazardous drinking score was also positively associated with reading a text while driving (Step 1 b = 0.14, p<.001) and falling asleep while driving (Step 1 b = 0.02, p=.02) in the model only controlling for demographic characteristics. The analyses also indicated co-variability between the following risky driving behaviors: (1) drinking and driving/reading a text message while driving, (2) drinking and driving/falling asleep and driving, (3) reading a text while driving/sending a text while driving, and (4) sending a text while driving/sleeping and driving. The findings of this study indicate a need for interventions discouraging both hazardous drinking and risky driving behaviors in college student populations; recommendations to reduce risky driving and hazardous drinking are discussed.

Beer drinking accounts for most of the hazardous alcohol consumption reported in the United States.

PubMed

Rogers, J D; Greenfield, T K

1999-11-01

Patterns and correlates of hazardous drinking, defined as occasions in which five or more drinks were consumed in a day, were compared for wine, beer and distilled spirits. From a probability sample of the U.S. adult household population, 2,817 respondents who had consumed at least one drink in the previous year were selected for analysis. The results show that, in the U.S., beer accounts for the bulk of alcohol consumed by the heaviest drinkers. Beer also accounts for a disproportionate share of hazardous drinking. Logistic regression analyses revealed that drinkers who consume beer in a hazardous fashion at least monthly are more likely to be young, male and unmarried, and less likely to be black than are other drinkers. Hazardous beer consumption is more predictive of alcohol-related problems than hazardous consumption of wine or spirits. Three potential explanations for the results are considered: advertising, beer-drinking subcultures and risk compensation. Additional research is urged in order to better specify the causal role of these and other factors in hazardous beer drinking.

Enhanced secondary analysis of survival data: reconstructing the data from published Kaplan-Meier survival curves.

PubMed

Guyot, Patricia; Ades, A E; Ouwens, Mario J N M; Welton, Nicky J

2012-02-01

The results of Randomized Controlled Trials (RCTs) on time-to-event outcomes that are usually reported are median time to events and Cox Hazard Ratio. These do not constitute the sufficient statistics required for meta-analysis or cost-effectiveness analysis, and their use in secondary analyses requires strong assumptions that may not have been adequately tested. In order to enhance the quality of secondary data analyses, we propose a method which derives from the published Kaplan Meier survival curves a close approximation to the original individual patient time-to-event data from which they were generated. We develop an algorithm that maps from digitised curves back to KM data by finding numerical solutions to the inverted KM equations, using where available information on number of events and numbers at risk. The reproducibility and accuracy of survival probabilities, median survival times and hazard ratios based on reconstructed KM data was assessed by comparing published statistics (survival probabilities, medians and hazard ratios) with statistics based on repeated reconstructions by multiple observers. The validation exercise established there was no material systematic error and that there was a high degree of reproducibility for all statistics. Accuracy was excellent for survival probabilities and medians, for hazard ratios reasonable accuracy can only be obtained if at least numbers at risk or total number of events are reported. The algorithm is a reliable tool for meta-analysis and cost-effectiveness analyses of RCTs reporting time-to-event data. It is recommended that all RCTs should report information on numbers at risk and total number of events alongside KM curves.

Lunar mission safety and rescue: Executive summary

NASA Technical Reports Server (NTRS)

1971-01-01

An executive summary is presented of the escape/rescue and the hazards analyses for manned missions and operations in the 1980 time frame. The method of approach, basic data generated, and significant results are outlined, and highlights of the two analyses are given. Areas in which research or technical development efforts could improve mission safety, and specific suggestions for additional effort studies on safety analyses are listed.

76 FR 2950 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR... 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)). Issued...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2013 CFR

2013-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2011 CFR

2011-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2014 CFR

2014-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

Hazard recognition in mining: A psychological perspective. Information circular/1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perdue, C.W.; Kowalski, K.M.; Barrett, E.A.

1995-07-01

This U.S. Bureau of Mines report considers, from a psychological perspective, the perceptual process by which miners recognize and respond to mining hazards. It proposes that if the hazard recognition skills of miners can be improved, mining accidents may be reduced to a significant degree. Prior studies of hazard perception in mining are considered, as are relevant studies from investigations of military target identification, pilot and gunnery officer training, transportation safety, automobile operator behavior, as well as research into sensory functioning and visual information processing. A general model of hazard perception is introduced, and selected concepts from the psychology ofmore » perception that are applicable to the detection of mining hazards are reviewed. Hazard recognition is discussed as a function of the perceptual cues available to the miner as well as the cognitive resources and strategies employed by the miner. The development of expertise in resonding to hazards is related to individual differences in the experience, aptitude, and personality of the worker. Potential applications to miner safety and training are presented.« less

Prevalence of Cryptosporidium oocysts and Giardia cysts in raw and treated sewage sludges.

PubMed

Amorós, Inmaculada; Moreno, Yolanda; Reyes, Mariela; Moreno-Mesonero, Laura; Alonso, Jose L

2016-11-01

Treated sludge from wastewater treatment plants (WWTPs) is commonly used in agriculture as fertilizers and to amend soils. The most significant health hazard for sewage sludge relates to the wide range of pathogenic microorganisms such as protozoa parasites.The objective of this study was to collect quantitative data on Cryptosporidium oocysts and Giardia cysts in the treated sludge in wastewater treatment facilities in Spain. Sludge from five WWTPs with different stabilization processes has been analysed for the presence of Cryptosporidium and Giardia in the raw sludge and after the sludge treatment. A composting plant (CP) has also been assessed. After a sedimentation step, sludge samples were processed and (oo)cysts were isolated by immunomagnetic separation (IMS) and detected by immunofluorescence assay (IFA). Results obtained in this study showed that Cryptosporidium oocysts and Giardia cysts were present in 26 of the 30 samples (86.6%) of raw sludge samples. In treated sludge samples, (oo)cysts have been observed in all WWTP's analysed (25 samples) with different stabilization treatment (83.3%). Only in samples from the CP no (oo)cysts were detected. This study provides evidence that (oo)cysts are present in sewage sludge-end products from wastewater treatment processes with the negative consequences for public health.

Conception of a method for the creation of volcanic risk index maps

NASA Astrophysics Data System (ADS)

Bion, P.; Van Wyk de Vries, B.; Valentine, G.

2012-04-01

Risk index maps are a variant of risk maps, having the advantage of containing unique kinds of information - levels of risk spatially represented - and can therefore be a more effective communication tool than traditional risk maps. Nevertheless, despite their apparent simplicity, their achievement is the result of a complex risk analysis, requiring the consideration of multidisciplinary indicators, expressing different parameters of the physical and human dimensions of the environment and their interactions. The risk index is obtained in three main stages: the definition of hazard and vulnerability indicators, the transformation of the indicators into subindices through mathematical processes (formulation, standardization, weighting), and the combination of the subindices into a final index. As of now, only few attempts of risk quantification have been done, related to landslide, flood or seismic hazards, and those linked to volcanic hazards are very incomplete because of the specificities and complexities of these kinds of events and their effects. Volcanic hazards have the particularity of being of different types, moreover all events can combine together or be combined with other external events (e.g. meteorological), and they can reach and therefore affect extensive areas by different phenomena. The methodology developed here assesses risk levels in regions potentially impacted by volcanic hazards. It incorporates volcanic hazard specificities and nuances of "vulnerability" by integrating the diversity of the environmental components. It analyses the natural and human strengths, weaknesses, opportunities and threats, which are located within the areas potentially "at risk". Consequently, it considers negative but also positive indicators (respectively aggravating and improving the potential consequences), which can be internal but also external to the volcanic hazards. The approach also considers a temporal variability of the events and their direct or indirect associated effects. The developed approach tends to be especially aimed at urban planners, who would possess a new fundamental tool for organizing the territories located "nearby" volcanoes, in which population density is continually increasing. The volcanic risk index maps would give indications on the areas with the highest risk level, and the urban planners would also be able to determine the elements causing such level. This would lead them to the possibility of proposing recommendations and adequate measures to participate to the reduction of vulnerability, in particular in limiting the exposure and the impacts associated with the volcanic hazards, which would consequently reduce the volcanic risks.

Prospects and pitfalls of occupational hazard mapping: 'between these lines there be dragons'.

PubMed

Koehler, Kirsten A; Volckens, John

2011-10-01

Hazard data mapping is a promising new technique that can enhance the process of occupational exposure assessment and risk communication. Hazard maps have the potential to improve worker health by providing key input for the design of hazard intervention and control strategies. Hazard maps are developed with aid from direct-reading instruments, which can collect highly spatially and temporally resolved data in a relatively short period of time. However, quantifying spatial-temporal variability in the occupational environment is not a straightforward process, and our lack of understanding of how to ascertain and model spatial and temporal variability is a limiting factor in the use and interpretation of workplace hazard maps. We provide an example of how sources of and exposures to workplace hazards may be mischaracterized in a hazard map due to a lack of completeness and representativeness of collected measurement data. Based on this example, we believe that a major priority for research in this emerging area should focus on the development of a statistical framework to quantify uncertainty in spatially and temporally varying data. In conjunction with this need is one for the development of guidelines and procedures for the proper sampling, generation, and evaluation of workplace hazard maps.

RMP Guidance for Warehouses - Chapter 7: Prevention Program (Program 3)

EPA Pesticide Factsheets

If you are already complying with the OSHA Process Safety Management standard for on-site consequences, your process hazard analysis (PHA) team may have to assess new hazards that could affect the public or the environment offsite.

40 CFR 63.9581 - Am I subject to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This Subpart... taconite iron ore processing plant that is (or is part of) a major source of hazardous air pollutant (HAP) emissions on the first compliance date that applies to you. Your taconite iron ore processing plant is a...

40 CFR 63.9581 - Am I subject to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This Subpart... taconite iron ore processing plant that is (or is part of) a major source of hazardous air pollutant (HAP) emissions on the first compliance date that applies to you. Your taconite iron ore processing plant is a...

40 CFR 63.9581 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This Subpart... taconite iron ore processing plant that is (or is part of) a major source of hazardous air pollutant (HAP) emissions on the first compliance date that applies to you. Your taconite iron ore processing plant is a...

40 CFR 63.9581 - Am I subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This Subpart... taconite iron ore processing plant that is (or is part of) a major source of hazardous air pollutant (HAP) emissions on the first compliance date that applies to you. Your taconite iron ore processing plant is a...

40 CFR 63.9581 - Am I subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing What This Subpart... taconite iron ore processing plant that is (or is part of) a major source of hazardous air pollutant (HAP) emissions on the first compliance date that applies to you. Your taconite iron ore processing plant is a...

Heavy Metal Risk Management: Case Analysis

PubMed Central

Kim, Ji Ae; Lee, Seung Ha; Choi, Seung Hyun; Jung, Ki Kyung; Park, Mi Sun; Jeong, Ji Yoon; Hwang, Myung Sil; Yoon, Hae Jung; Choi, Dal Woong

2012-01-01

To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods. PMID:24278603

A Comprehensive Probabilistic Tsunami Hazard Assessment: Multiple Sources and Short-Term Interactions

NASA Astrophysics Data System (ADS)

Anita, G.; Selva, J.; Laura, S.

2011-12-01

We develop a comprehensive and total probabilistic tsunami hazard assessment (TotPTHA), in which many different possible source types concur to the definition of the total tsunami hazard at given target sites. In a multi-hazard and multi-risk perspective, such an innovative approach allows, in principle, to consider all possible tsunamigenic sources, from seismic events, to slides, asteroids, volcanic eruptions, etc. In this respect, we also formally introduce and discuss the treatment of interaction/cascade effects in the TotPTHA analysis. We demonstrate how external triggering events may induce significant temporary variations in the tsunami hazard. Because of this, such effects should always be considered, at least in short-term applications, to obtain unbiased analyses. Finally, we prove the feasibility of the TotPTHA and of the treatment of interaction/cascade effects by applying this methodology to an ideal region with realistic characteristics (Neverland).

Plasma Hazards and Acceptance for International Space Station Extravehicular Activities

NASA Astrophysics Data System (ADS)

Patton, Thomas

2010-09-01

Extravehicular activity(EVA) is accepted by NASA and other space faring agencies as a necessary risk in order to build and maintain a safe and efficient laboratory in space. EVAs are used for standard construction and as contingency operations to repair critical equipment for vehicle sustainability and safety of the entire crew in the habitable volume. There are many hazards that are assessed for even the most mundane EVA for astronauts, and the vast majority of these are adequately controlled per the rules of the International Space Station Program. The need for EVA repair and construction has driven acceptance of a possible catastrophic hazard to the EVA crewmember which cannot currently be controlled adequately. That hazard is electrical shock from the very environment in which they work. This paper describes the environment, causes and contributors to the shock of EVA crewmembers attributed to the ionospheric plasma environment in low Earth orbit. It will detail the hazard history, and acceptance process for the risk associated with these hazards that give assurance to a safe EVA. In addition to the hazard acceptance process this paper will explore other factors that go into the decision to accept a risk including criticality of task, hardware design and capability, and the probability of hazard occurrence. Also included will be the required interaction between organizations at NASA(EVA Office, Environments, Engineering, Mission Operations, Safety) in order to build and eventually gain adequate acceptance rationale for a hazard of this kind. During the course of the discussion, all current methods of mitigating the hazard will be identified. This paper will capture the history of the plasma hazard analysis and processes used by the International Space Station Program to formally assess and qualify the risk. The paper will discuss steps that have been taken to identify and perform required analysis of the floating potential shock hazard from the ISS environment which eventually led to its status as an accepted risk for ISS EVAs.

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

PubMed

Lofgren, Don J; Reeb-Whitaker, Carolyn K; Adams, Darrin

2010-07-01

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study. Inspections by report of a hazard and by targeting were compared for the following: number of inspections, number and percentage of inspections with workers exposed to substances above an agency's permissible exposure limit, types of industries inspected, and number and type of chemical substances assessed. Report of a hazard inspections documented work sites with worker overexposure at the same rate as agency targeted inspections (approximately 35% of the time), suggesting that complainants and referents are a credible pool of observers capable of directing the agency to airborne chemical substance hazards. Report of a hazard inspections were associated with significantly broader distribution of industries as well as a greater variety of chemical substance exposures than were targeted inspections. Narrative text that described business type and processes inspected was more useful than NAICS codes alone and critical in identifying processes and industries that may be associated with new hazards. Finally, previously identified emerging hazards were found among the report of a hazard data. These findings indicate that surveillance of OSHA inspection data can be a valid tool to identify uncharacterized and emerging health hazards. Additional research is needed to develop criteria for objective review and prioritization of the data for intervention. Federal OSHA and other state OSHA agencies will need to add electronic data entry fields more descriptive of industry, process, and substance to fully use agency exposure data for hazard surveillance.

The evolution of a health hazard assessment database management system for military weapons, equipment, and materiel.

PubMed

Murnyak, George R; Spencer, Clark O; Chaney, Ann E; Roberts, Welford C

2002-04-01

During the 1970s, the Army health hazard assessment (HHA) process developed as a medical program to minimize hazards in military materiel during the development process. The HHA Program characterizes health hazards that soldiers and civilians may encounter as they interact with military weapons and equipment. Thus, it is a resource for medical planners and advisors to use that can identify and estimate potential hazards that soldiers may encounter as they train and conduct missions. The U.S. Army Center for Health Promotion and Preventive Medicine administers the program, which is integrated with the Army's Manpower and Personnel Integration program. As the HHA Program has matured, an electronic database has been developed to record and monitor the health hazards associated with military equipment and systems. The current database tracks the results of HHAs and provides reporting designed to assist the HHA Program manager in daily activities.

Decreased pain sensitivity due to trimethylbenzene exposure ...

EPA Pesticide Factsheets

Traditionally, human health risk assessments have relied on qualitative approaches for hazard identification, often using the Hill criteria and weight of evidence determinations to integrate data from multiple studies. Recently, the National Research Council has recommended the development of quantitative approaches for evidence integration, including the application of meta-analyses. The following hazard identification case study applies qualitative as well as meta-analytic approaches to trimethylbenzene (TMB) isomers exposure and the potential neurotoxic effects on pain sensitivity. In the meta-analytic approach, a pooled effect size is calculated, after consideration of multiple confounding factors, in order to determine whether the entire database under consideration indicates that TMBs are likely to be a neurotoxic hazard. The pain sensitivity studies included in the present analyses initially seem discordant in their results: effects on pain sensitivity are seen immediately after termination of exposure, appear to resolve 24 hours after exposure, and then reappear 50 days later following foot-shock. Qualitative consideration of toxicological and toxicokinetic characteristics of the TMB isomers suggests that the observed differences between studies are due to testing time and can be explained through a complete consideration of the underlying biology of the effect and the nervous system as a whole. Meta-analyses and –regressions support this conclus

Lunar Landing Trajectory Design for Onboard Hazard Detection and Avoidance

NASA Technical Reports Server (NTRS)

Paschall, Steve; Brady, Tye; Sostaric, Ron

2009-01-01

The Autonomous Landing and Hazard Avoidance Technology (ALHAT) Project is developing the software and hardware technology needed to support a safe and precise landing for the next generation of lunar missions. ALHAT provides this capability through terrain-relative navigation measurements to enhance global-scale precision, an onboard hazard detection system to select safe landing locations, and an Autonomous Guidance, Navigation, and Control (AGNC) capability to process these measurements and safely direct the vehicle to a landing location. This paper focuses on the key trajectory design issues relevant to providing an onboard Hazard Detection and Avoidance (HDA) capability for the lander. Hazard detection can be accomplished by the crew visually scanning the terrain through a window, a sensor system imaging the terrain, or some combination of both. For ALHAT, this hazard detection activity is provided by a sensor system, which either augments the crew s perception or entirely replaces the crew in the case of a robotic landing. Detecting hazards influences the trajectory design by requiring the proper perspective, range to the landing site, and sufficient time to view the terrain. Following this, the trajectory design must provide additional time to process this information and make a decision about where to safely land. During the final part of the HDA process, the trajectory design must provide sufficient margin to enable a hazard avoidance maneuver. In order to demonstrate the effects of these constraints on the landing trajectory, a tradespace of trajectory designs was created for the initial ALHAT Design Analysis Cycle (ALDAC-1) and each case evaluated with these HDA constraints active. The ALHAT analysis process, described in this paper, narrows down this tradespace and subsequently better defines the trajectory design needed to support onboard HDA. Future ALDACs will enhance this trajectory design by balancing these issues and others in an overall system design process.

Advanced Corrections for InSAR Using GPS and Numerical Weather Models

NASA Astrophysics Data System (ADS)

Cossu, F.; Foster, J. H.; Amelung, F.; Varugu, B. K.; Businger, S.; Cherubini, T.

2017-12-01

We present results from an investigation into the application of numerical weather models for generating tropospheric correction fields for Interferometric Synthetic Aperture Radar (InSAR). We apply the technique to data acquired from a UAVSAR campaign as well as from the CosmoSkyMed satellites. The complex spatial and temporal changes in the atmospheric propagation delay of the radar signal remain the single biggest factor limiting InSAR's potential for hazard monitoring and mitigation. A new generation of InSAR systems is being built and launched, and optimizing the science and hazard applications of these systems requires advanced methodologies to mitigate tropospheric noise. We use the Weather Research and Forecasting (WRF) model to generate a 900 m spatial resolution atmospheric models covering the Big Island of Hawaii and an even higher, 300 m resolution grid over the Mauna Loa and Kilauea volcanoes. By comparing a range of approaches, from the simplest, using reanalyses based on typically available meteorological observations, through to the "kitchen-sink" approach of assimilating all relevant data sets into our custom analyses, we examine the impact of the additional data sets on the atmospheric models and their effectiveness in correcting InSAR data. We focus particularly on the assimilation of information from the more than 60 GPS sites in the island. We ingest zenith tropospheric delay estimates from these sites directly into the WRF analyses, and also perform double-difference tomography using the phase residuals from the GPS processing to robustly incorporate heterogeneous information from the GPS data into the atmospheric models. We assess our performance through comparisons of our atmospheric models with external observations not ingested into the model, and through the effectiveness of the derived phase screens in reducing InSAR variance. Comparison of the InSAR data, our atmospheric analyses, and assessments of the active local and mesoscale meteorological processes allows us to assess under what conditions the technique works most effectively. This work will produce best-practice recommendations for the use of weather models for InSAR correction, and inform efforts to design a global strategy for the NISAR mission, for both low-latency and definitive atmospheric correction products.

Climate-Related Hazards: A Method for Global Assessment of Urban and Rural Population Exposure to Cyclones, Droughts, and Floods

PubMed Central

Christenson, Elizabeth; Elliott, Mark; Banerjee, Ovik; Hamrick, Laura; Bartram, Jamie

2014-01-01

Global climate change (GCC) has led to increased focus on the occurrence of, and preparation for, climate-related extremes and hazards. Population exposure, the relative likelihood that a person in a given location was exposed to a given hazard event(s) in a given period of time, was the outcome for this analysis. Our objectives were to develop a method for estimating the population exposure at the country level to the climate-related hazards cyclone, drought, and flood; develop a method that readily allows the addition of better datasets to an automated model; differentiate population exposure of urban and rural populations; and calculate and present the results of exposure scores and ranking of countries based on the country-wide, urban, and rural population exposures to cyclone, drought, and flood. Gridded global datasets on cyclone, drought and flood occurrence as well as population density were combined and analysis was carried out using ArcGIS. Results presented include global maps of ranked country-level population exposure to cyclone, drought, flood and multiple hazards. Analyses by geography and human development index (HDI) are also included. The results and analyses of this exposure assessment have implications for country-level adaptation. It can also be used to help prioritize aid decisions and allocation of adaptation resources between countries and within a country. This model is designed to allow flexibility in applying cyclone, drought and flood exposure to a range of outcomes and adaptation measures. PMID:24566046

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 68.67 - Process hazard analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.67 Process hazard analysis. (a... potential for catastrophic consequences. (3) Engineering and administrative controls applicable to the... engineering and administrative controls; (5) Stationary source siting; (6) Human factors; and (7) A...

40 CFR 68.67 - Process hazard analysis.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.67 Process hazard analysis. (a... potential for catastrophic consequences. (3) Engineering and administrative controls applicable to the... engineering and administrative controls; (5) Stationary source siting; (6) Human factors; and (7) A...

40 CFR 68.67 - Process hazard analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.67 Process hazard analysis. (a... potential for catastrophic consequences. (3) Engineering and administrative controls applicable to the... engineering and administrative controls; (5) Stationary source siting; (6) Human factors; and (7) A...

36 CFR 218.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ADMINISTRATIVE REVIEW PROCESSES Predecisional Administrative Review Process for Hazardous Fuel Reduction Projects... reduction project: A hazardous fuel reduction project authorized by the Healthy Forests Restoration Act of... reduction project pursuant to the HFRA. Decision notice (DN): A concise written record of a responsible...

Chemical Safety Alert: Identifying Chemical Reactivity Hazards Preliminary Screening Method

EPA Pesticide Factsheets

Introduces small-to-medium-sized facilities to a method developed by Center for Chemical Process Safety (CCPS), based on a series of twelve yes-or-no questions to help determine hazards in warehousing, repackaging, blending, mixing, and processing.

RMP Guidance for Chemical Distributors - Chapter 7: Prevention Program (Program 3)

EPA Pesticide Factsheets

The OSHA Process Safety Management program has legal authority for on-site consequences, EPA's Prevention Program for offsite consequences, so your process hazard analysis (PHA) team may have to assess new hazards to the public and offsite environment.

SURVEY OF SOLIDIFICATION/STABILIZATION TECHNOLOGY FOR HAZARDOUS INDUSTRIAL WASTES

EPA Science Inventory

Stabilization/solidification or fixation is a process for treating industrial solid wastes (primarily sludges) that contain hazardous constituents to prevent dissolution and loss of toxic materials into the environment. Most of these treatment processes are designed to produce a ...

Composition and process for the encapsulation and stabilization of radioactive hazardous and mixed wastes

DOEpatents

Kalb, P.D.; Colombo, P.

1997-07-15

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogeneous molten matrix. The molten matrix may be directed in a ``clean`` polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment. 2 figs.

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, P.D.; Colombo, P.

1998-03-24

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogeneous molten matrix. The molten matrix may be directed in a ``clean`` polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment. 2 figs.

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, P.D.; Colombo, P.

1999-07-20

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogeneous molten matrix. The molten matrix may be directed in a clean'' polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment. 2 figs.

Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Peter P.; Wagner, Katie A.

A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affectingmore » the public.« less

Testing of Confining Pressure Impacton Explosion Energy of Explosive Materials

NASA Astrophysics Data System (ADS)

Drzewiecki, Jan; Myszkowski, Jacek; Pytlik, Andrzej; Pytlik, Mateusz

2017-06-01

This paper presents the results of testing the explosion effects of two explosive charges placed in an environment with specified values of confining pressure. The aim of this study is to determine the impact of variable environmental conditions on the suitability of particular explosives for their use in the prevention of natural hazards in hard coal mining. The research results will contribute to improving the efficiency of currently adopted technologies of natural hazard prevention and aid in raising the level of occupational safety. To carry out the subject matter measurements, a special test stand was constructed which allows the value of the initial pressure inside the chamber, which constitutes its integral part, to be altered before the detonation of the charge being tested. The obtained characteristics of the pressure changes during the explosion of the analysed charge helped to identify the work (energy) which was produced during the process. The test results are a valuable source of information, opening up new possibilities for the use of explosives, the development of innovative solutions for the construction of explosive charges and their initiation.

Software System Architecture Modeling Methodology for Naval Gun Weapon Systems

DTIC Science & Technology

2010-12-01

Weapon System HAR Hazard Action Report HERO Hazards of Electromagnetic Radiation to Ordnance IOC Initial Operational Capability... radiation to ordnance ; and combinations therein. Equipment, systems, or procedures and processes whose malfunction would hazard the safe manufacturing...NDI Non-Development Item OPEVAL Operational Evaluation ORDALTS Ordnance Alterations O&SHA Operating and Support Hazard Analysis PDA

Attentional Differences in a Driving Hazard Perception Task in Adults with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Sheppard, Elizabeth; van Loon, Editha; Underwood, Geoffrey; Ropar, Danielle

2017-01-01

The current study explored attentional processing of social and non-social stimuli in ASD within the context of a driving hazard perception task. Participants watched videos of road scenes and detected hazards while their eye movements were recorded. Although individuals with ASD demonstrated relatively good detection of driving hazards, they were…

Mortality in HIV-Infected Alcohol and Drug Users in St. Petersburg, Russia

PubMed Central

Fairbairn, Nadia S.; Walley, Alexander Y.; Cheng, Debbie M.; Quinn, Emily; Bridden, Carly; Chaisson, Christine; Blokhina, Elena; Lioznov, Dmitry; Krupitsky, Evgeny; Raj, Anita; Samet, Jeffrey H.

2016-01-01

In Russia, up to half of premature deaths are attributed to hazardous drinking. The respective roles of alcohol and drug use in premature death among people with HIV in Russia have not been described. Criminalization and stigmatization of substance use in Russia may also contribute to mortality. We explored whether alcohol, drug use and risk environment factors are associated with short-term mortality in HIV-infected Russians who use substances. Secondary analyses were conducted using prospective data collected at baseline, 6 and 12-months from HIV-infected people who use substances recruited between 2007–2010 from addiction and HIV care settings in a single urban setting of St. Petersburg, Russia. We used Cox proportional hazards models to explore associations between 30-day alcohol hazardous drinking, injection drug use, polysubstance use and environmental risk exposures (i.e. past incarceration, police involvement, selling sex, and HIV stigma) with mortality. Among 700 participants, 59% were male and the mean age was 30 years. There were 40 deaths after a median follow-up of 12 months (crude mortality rate 5.9 per 100 person-years). In adjusted analyses, 30-day NIAAA hazardous drinking was significantly associated with mortality compared to no drinking [adjusted Hazard Ratio (aHR) 2.60, 95% Confidence Interval (CI): 1.24–5.44] but moderate drinking was not (aHR 0.95, 95% CI: 0.35–2.59). No other factors were significantly associated with mortality. The high rates of short-term mortality and the strong association with hazardous drinking suggest a need to integrate evidence-based alcohol interventions into treatment strategies for HIV-infected Russians. PMID:27898683

Measures of Physical and Mental Independence Among HIV-Positive Individuals: Impact of Substance Use Disorder.

PubMed

Christensen, Bianca; Qin, Zijian; Byrd, Desiree A; Yu, Fang; Morgello, Susan; Gelman, Benjamin B; Moore, David J; Grant, Igor; Singer, Elyse J; Fox, Howard S; Baccaglini, Lorena

2017-10-01

With the transition of HIV infection from an acute to a chronic disease after the introduction of antiretroviral medications, there has been an increased focus on long-term neurocognitive and other functional outcomes of HIV patients. Thus, we assessed factors, particularly history of a substance use disorder, associated with time to loss of measures of physical or mental independence among HIV-positive individuals. Data were obtained from the National NeuroAIDS Tissue Consortium. Kaplan-Meier and Cox proportional hazards regression analyses were used to estimate the time since HIV diagnosis to loss of independence, and to identify associated risk factors. HIV-positive participants who self-identified as physically (n = 698) or mentally (n = 616) independent on selected activities of daily living at baseline were eligible for analyses. A history of substance use disorder was associated with a higher hazard of loss of both physical and mental independence [adjusted hazard ratio (HR) = 1.71, 95% confidence interval (95% CI): 1.07-2.78; adjusted HR = 1.67, 95% CI: 1.11-2.52, respectively]. After adjusting for substance use disorder and other covariates, older age at diagnosis and female gender were associated with higher hazards of loss of both physical and mental independence, non-white participants had higher hazards of loss of physical independence, whereas participants with an abnormal neurocognitive diagnosis and fewer years of education had higher hazards of loss of mental independence. In summary, history of substance use disorder was associated with loss of measures of both physical and mental independence. The nature of this link and the means to prevent such loss of independence need further investigation.

WE-G-BRA-06: Application of Systems and Control Theory-Based Hazard Analysis to Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlicki, T; Samost, A; Leveson, N

Purpose: The process of delivering radiation occurs in a complex socio-technical system heavily reliant on human operators. Furthermore, both humans and software are notoriously challenging to account for in traditional hazard analysis models. High reliability industries such as aviation have approached this problem through using hazard analysis techniques grounded in systems and control theory. The purpose of this work is to apply the Systems Theoretic Accident Model Processes (STAMP) hazard model to radiotherapy. In particular, the System-Theoretic Process Analysis (STPA) approach is used to perform a hazard analysis of a proposed on-line adaptive cranial radiosurgery procedure that omits the CTmore » Simulation step and uses only CBCT for planning, localization, and treatment. Methods: The STPA procedure first requires the definition of high-level accidents and hazards leading to those accidents. From there, hierarchical control structures were created followed by the identification and description of control actions for each control structure. Utilizing these control structures, unsafe states of each control action were created. Scenarios contributing to unsafe control action states were then identified and translated into system requirements to constrain process behavior within safe boundaries. Results: Ten control structures were created for this new CBCT-only process which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Twenty three control actions were identified that contributed to over 80 unsafe states of those control actions resulting in over 220 failure scenarios. Conclusion: The interaction of people, hardware, and software are highlighted through the STPA approach. STPA provides a hierarchical model for understanding the role of management decisions in impacting system safety so that a process design requirement can be traced back to the hazard and accident that it is intended to mitigate. Varian Medical Systems, Inc.« less

Software system safety

NASA Technical Reports Server (NTRS)

Uber, James G.

1988-01-01

Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

Off-Nominal Performance of the International Space Station Solar Array Wings Under Orbital Eclipse Lighting Scenarios

NASA Technical Reports Server (NTRS)

Kerslake, Thomas W.; Scheiman, David A.

2005-01-01

This paper documents testing and analyses to quantify International Space Station (ISS) Solar Array Wing (SAW) string electrical performance under highly off-nominal, low-temperature-low-intensity (LILT) operating conditions with nonsolar light sources. This work is relevant for assessing feasibility and risks associated with a Sequential Shunt Unit (SSU) remove and replace (R&R) Extravehicular Activity (EVA). During eclipse, SAW strings can be energized by moonlight, EVA suit helmet lights or video camera lights. To quantify SAW performance under these off-nominal conditions, solar cell performance testing was performed using full moon, solar simulator and Video Camera Luminaire (VCL) light sources. Test conditions included 25 to 110 C temperatures and 1- to 0.0001-Sun illumination intensities. Electrical performance data and calculated eclipse lighting intensities were combined to predict SAW current-voltage output for comparison with electrical hazard thresholds. Worst case predictions show there is no connector pin molten metal hazard but crew shock hazard limits are exceeded due to VCL illumination. Assessment uncertainties and limitations are discussed along with operational solutions to mitigate SAW electrical hazards from VCL illumination. Results from a preliminary assessment of SAW arcing are also discussed. The authors recommend further analyses once SSU, R&R, and EVA procedures are better defined.

Process Waste Assessment, Mechanics Shop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, N.M.

1993-05-01

This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Mechanics Shop. The Mechanics Shop maintains and repairs motorized vehicles and equipment on the SNL/California site, to include motorized carts, backhoes, street sweepers, trash truck, portable emergency generators, trencher, portable crane, and man lifts. The major hazardous waste streams routinely generated by the Mechanics Shop are used oil, spent off filters, oily rags, and spent batteries. The used off and spent off filters make up a significant portion of the overall hazardous waste stream. Waste oil and spent batteries are sent off-site for recycling. The rags andmore » spent on filters are not recycled. They are disposed of as hazardous waste. Mechanics Shop personnel continuously look for opportunities to minimize hazardous wastes.« less

75 FR 28227 - National Emission Standards for Hazardous Air Pollutants: Gold Mine Ore Processing and Production...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... published a proposed rule for mercury emissions from the gold mine ore processing and production area source... proposed rule (75 FR 22470). Several parties requested that EPA extend the comment period. EPA has granted...-AP48 National Emission Standards for Hazardous Air Pollutants: Gold Mine Ore Processing and Production...

The impact of regulatory compliance behavior on hazardous waste generation in European private healthcare facilities.

PubMed

Botelho, Anabela

2013-10-01

This study empirically evaluates whether the increasingly large numbers of private outpatient healthcare facilities (HCFs) within the European Union (EU) countries comply with the existing European waste legislation, and whether compliance with such legislation affects the fraction of healthcare waste (HCW) classified as hazardous. To that end, this study uses data collected by a large survey of more than 700 small private HCFs distributed throughout Portugal, a full member of the EU since 1986, where 50% of outpatient care is currently dominated by private operators. The collected data are then used to estimate a hurdle model, i.e. a statistical specification in which there are two processes: one is the process by which some HCFs generate zero or some positive fraction of hazardous HCW, and another is the process by which HCFs generate a specific positive fraction of hazardous HCW conditional on producing any. Taken together, the results show that although compliance with the law is far from ideal, it is the strongest factor influencing hazardous waste generation. In particular, it is found that higher compliance has a small and insignificant effect on the probability of generating (or reporting) positive amounts of hazardous waste, but it does have a large and significant effect on the fraction of hazardous waste produced, conditional on producing any, with a unit increase in the compliance rate leading to an estimated decrease in the fraction of hazardous HCW by 16.3 percentage points.

Comparative hazard analysis of processes leading to remarkable flash floods (France, 1930-1999)

NASA Astrophysics Data System (ADS)

Boudou, M.; Lang, M.; Vinet, F.; Cœur, D.

2016-10-01

Flash flood events are responsible for large economic losses and lead to fatalities every year in France. This is especially the case in the Mediterranean and oversea territories/departments of France, characterized by extreme hydro-climatological features and with a large part of the population exposed to flood risks. The recurrence of remarkable flash flood events, associated with high hazard intensity, significant damage and socio-political consequences, therefore raises several issues for authorities and risk management policies. This study aims to improve our understanding of the hazard analysis process in the case of four remarkable flood events: March 1930, October 1940, January 1980 and November 1999. Firstly, we present the methodology used to define the remarkability score of a flood event. Then, to identify the factors leading to a remarkable flood event, we explore the main parameters of the hazard analysis process, such as the meteorological triggering conditions, the return period of the rainfall and peak discharge, as well as some additional factors (initial catchment state, flood chronology, cascade effects, etc.). The results contribute to understanding the complexity of the processes leading to flood hazard and highlight the importance for risk managers of taking additional factors into account.

Radar image and data fusion for natural hazards characterisation

USGS Publications Warehouse

Lu, Zhong; Dzurisin, Daniel; Jung, Hyung-Sup; Zhang, Jixian; Zhang, Yonghong

2010-01-01

Fusion of synthetic aperture radar (SAR) images through interferometric, polarimetric and tomographic processing provides an all - weather imaging capability to characterise and monitor various natural hazards. This article outlines interferometric synthetic aperture radar (InSAR) processing and products and their utility for natural hazards characterisation, provides an overview of the techniques and applications related to fusion of SAR/InSAR images with optical and other images and highlights the emerging SAR fusion technologies. In addition to providing precise land - surface digital elevation maps, SAR - derived imaging products can map millimetre - scale elevation changes driven by volcanic, seismic and hydrogeologic processes, by landslides and wildfires and other natural hazards. With products derived from the fusion of SAR and other images, scientists can monitor the progress of flooding, estimate water storage changes in wetlands for improved hydrological modelling predictions and assessments of future flood impacts and map vegetation structure on a global scale and monitor its changes due to such processes as fire, volcanic eruption and deforestation. With the availability of SAR images in near real - time from multiple satellites in the near future, the fusion of SAR images with other images and data is playing an increasingly important role in understanding and forecasting natural hazards.

Phytoremediation of Contaminated Soil and Ground Water at Hazardous Waste Sites

EPA Pesticide Factsheets

The purpose of this issue paper is to provide a concise discussion of the processes associated with the use of phytoremediation as a cleanup or containment technique for remediation of hazardous waste sites. Introductory material on plant processes is ...

List of Potentially Affected Sources for the Asphalt Processing and Roofing Manufacturing National Emission Standards for Hazardous Air Pollutants (NESHAP) November 2001

EPA Pesticide Factsheets

This is a November 2001 list of sources identified by EPA as potentially affected by the Asphalt Processing and Roofing Manufacturing National Emission Standards for Hazardous Air Pollutants (NESHAP).

Survivorship analysis when cure is a possibility: a Monte Carlo study.

PubMed

Goldman, A I

1984-01-01

Parametric survivorship analyses of clinical trials commonly involves the assumption of a hazard function constant with time. When the empirical curve obviously levels off, one can modify the hazard function model by use of a Gompertz or Weibull distribution with hazard decreasing over time. Some cancer treatments are thought to cure some patients within a short time of initiation. Then, instead of all patients having the same hazard, decreasing over time, a biologically more appropriate model assumes that an unknown proportion (1 - pi) have constant high risk whereas the remaining proportion (pi) have essentially no risk. This paper discusses the maximum likelihood estimation of pi and the power curves of the likelihood ratio test. Monte Carlo studies provide results for a variety of simulated trials; empirical data illustrate the methods.

Volcanic hazard map for Telica, Cerro Negro and El Hoyo volcanoes, Nicaragua

NASA Astrophysics Data System (ADS)

Asahina, T.; Navarro, M.; Strauch, W.

2007-05-01

A volcano hazard study was conducted for Telica, Cerro Negro and El Hoyo volcanoes, Nicaragua, based on geological and volcanological field investigations, air photo analyses, and numerical eruption simulation. These volcanoes are among the most active volcanoes of the country. This study was realized 2004-2006 through technical cooperation of Japan International Cooperation Agency (JICA) with INETER, upon the request of the Government of Nicaragua. The resulting volcanic hazard map on 1:50,000 scale displays the hazards of lava flow, pyroclastic flows, lahars, tephra fall, volcanic bombs for an area of 1,300 square kilometers. The map and corresponding GIS coverage was handed out to Central, Departmental and Municipal authorities for their use and is included in a National GIS on Georisks developed and maintained by INETER.

Implications of different digital elevation models and preprocessing techniques to delineate debris flow inundation hazard zones in El Salvador

NASA Astrophysics Data System (ADS)

Anderson, E. R.; Griffin, R.; Irwin, D.

2013-12-01

Heavy rains and steep, volcanic slopes in El Salvador cause numerous landslides every year, posing a persistent threat to the population, economy and environment. Although potential debris inundation hazard zones have been delineated using digital elevation models (DEMs), some disparities exist between the simulated zones and actual affected areas. Moreover, these hazard zones have only been identified for volcanic lahars and not the shallow landslides that occur nearly every year. This is despite the availability of tools to delineate a variety of landslide types (e.g., the USGS-developed LAHARZ software). Limitations in DEM spatial resolution, age of the data, and hydrological preprocessing techniques can contribute to inaccurate hazard zone definitions. This study investigates the impacts of using different elevation models and pit filling techniques in the final debris hazard zone delineations, in an effort to determine which combination of methods most closely agrees with observed landslide events. In particular, a national DEM digitized from topographic sheets from the 1970s and 1980s provide an elevation product at a 10 meter resolution. Both natural and anthropogenic modifications of the terrain limit the accuracy of current landslide hazard assessments derived from this source. Global products from the Shuttle Radar Topography Mission (SRTM) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM) offer more recent data but at the cost of spatial resolution. New data derived from the NASA Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) in 2013 provides the opportunity to update hazard zones at a higher spatial resolution (approximately 6 meters). Hydrological filling of sinks or pits for current hazard zone simulation has previously been achieved through ArcInfo spatial analyst. Such hydrological processing typically only fills pits and can lead to drastic modifications of original elevation values. Optimized pit filling techniques use both cut and fill operations to minimize modifications of the original DEM. Satellite image interpretation and field surveying provide the baseline upon which to test the accuracy of each model simulation. By outlining areas that could potentially be inundated by debris flows, these efforts can be used to more accurately identify the places and assets immediately exposed to landslide hazards. We contextualize the results of the previous and ongoing efforts into how they may be incorporated into decision support systems. We also discuss if and how these analyses would have provided additional knowledge in the past, and identify specific recommendations as to how they could contribute to a more robust decision support system in the future.

The application of hazard analysis and critical control points and risk management in the preparation of anti-cancer drugs.

PubMed

Bonan, Brigitte; Martelli, Nicolas; Berhoune, Malik; Maestroni, Marie-Laure; Havard, Laurent; Prognon, Patrice

2009-02-01

To apply the Hazard analysis and Critical Control Points method to the preparation of anti-cancer drugs. To identify critical control points in our cancer chemotherapy process and to propose control measures and corrective actions to manage these processes. The Hazard Analysis and Critical Control Points application began in January 2004 in our centralized chemotherapy compounding unit. From October 2004 to August 2005, monitoring of the process nonconformities was performed to assess the method. According to the Hazard Analysis and Critical Control Points method, a multidisciplinary team was formed to describe and assess the cancer chemotherapy process. This team listed all of the critical points and calculated their risk indexes according to their frequency of occurrence, their severity and their detectability. The team defined monitoring, control measures and corrective actions for each identified risk. Finally, over a 10-month period, pharmacists reported each non-conformity of the process in a follow-up document. Our team described 11 steps in the cancer chemotherapy process. The team identified 39 critical control points, including 11 of higher importance with a high-risk index. Over 10 months, 16,647 preparations were performed; 1225 nonconformities were reported during this same period. The Hazard Analysis and Critical Control Points method is relevant when it is used to target a specific process such as the preparation of anti-cancer drugs. This method helped us to focus on the production steps, which can have a critical influence on product quality, and led us to improve our process.

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or operator shall conduct a review of the hazards associated with the regulated substances, process, and...

Antidepressant Medication Use and its Association with Cardiovascular Disease and All-Cause Mortality in the Reasons for Geographic and Ethnic Differences in Stroke (REGARDS) Study

PubMed Central

Hansen, Richard A.; Khodneva, Yulia; Glasser, Stephen P.; Qian, Jingjing; Redmond, Nicole; Safford, Monika M.

2018-01-01

Background Mixed evidence suggests second-generation antidepressants may increase risk of cardiovascular and cerebrovascular events. Objective Assess whether antidepressant use is associated with acute coronary heart disease, stroke, cardiovascular disease death, and all-cause mortality. Methods Secondary analyses of the Reasons for Geographic and Racial Differences in Stroke (REGARDS) longitudinal cohort study were conducted. Use of selective serotonin reuptake inhibitors, serotonin and norepinephrine reuptake inhibitors, bupropion, nefazodone, and trazodone was measured during the baseline (2003-2007) in-home visit. Outcomes of coronary heart disease, stroke, cardiovascular disease death, and all-cause mortality were assessed every 6 months and adjudicated by medical record review. Cox proportional hazards time-to-event analysis followed patients until their first event on or before December 31, 2011, iteratively adjusting for covariates. Results Among 29,616 participants, 3,458 (11.7%) used an antidepressant of interest. Intermediate models adjusting for everything but physical and mental health found an increased risk of acute coronary heart disease (Hazard Ratio=1.21; 95% CI 1.04-1.41), stroke (Hazard Ratio=1.28; 95% CI 1.02-1.60), cardiovascular disease death (Hazard Ratio =1.29; 95% CI 1.09-1.53), and all-cause mortality (Hazard Ratio=1.27; 95% CI 1.15-1.41) for antidepressant users. Risk estimates trended in this direction for all outcomes in the fully adjusted model, but only remained statistically associated with increased risk of all-cause mortality (Hazard Ratio=1.12; 95% CI 1.01-1.24). This risk was attenuated in sensitivity analyses censoring follow-up time at 2-years (Hazard Ratio=1.37; 95% CI 1.11-1.68). Conclusions In fully adjusted models antidepressant use was associated with a small increase in all-cause mortality. PMID:26783360

The Gravitational Process Path (GPP) model (v1.0) - a GIS-based simulation framework for gravitational processes

NASA Astrophysics Data System (ADS)

Wichmann, Volker

2017-09-01

The Gravitational Process Path (GPP) model can be used to simulate the process path and run-out area of gravitational processes based on a digital terrain model (DTM). The conceptual model combines several components (process path, run-out length, sink filling and material deposition) to simulate the movement of a mass point from an initiation site to the deposition area. For each component several modeling approaches are provided, which makes the tool configurable for different processes such as rockfall, debris flows or snow avalanches. The tool can be applied to regional-scale studies such as natural hazard susceptibility mapping but also contains components for scenario-based modeling of single events. Both the modeling approaches and precursor implementations of the tool have proven their applicability in numerous studies, also including geomorphological research questions such as the delineation of sediment cascades or the study of process connectivity. This is the first open-source implementation, completely re-written, extended and improved in many ways. The tool has been committed to the main repository of the System for Automated Geoscientific Analyses (SAGA) and thus will be available with every SAGA release.

14 CFR 417.219 - Data loss flight time and planned safe flight state analyses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Data loss flight time and planned safe flight state analyses. 417.219 Section 417.219 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION... flight to a condition where the launch vehicle's hazardous debris impact dispersion extends to any...

14 CFR 417.219 - Data loss flight time and planned safe flight state analyses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Data loss flight time and planned safe flight state analyses. 417.219 Section 417.219 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION... flight to a condition where the launch vehicle's hazardous debris impact dispersion extends to any...

14 CFR 417.219 - Data loss flight time and planned safe flight state analyses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Data loss flight time and planned safe flight state analyses. 417.219 Section 417.219 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION... flight to a condition where the launch vehicle's hazardous debris impact dispersion extends to any...

40 CFR 265.273 - Waste analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Waste analysis. 265.273 Section 265... FACILITIES Land Treatment § 265.273 Waste analysis. In addition to the waste analyses required by § 265.13... listed as a hazardous waste. As required by § 265.13, the waste analysis plan must include analyses...

14 CFR 417.219 - Data loss flight time and planned safe flight state analyses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Data loss flight time and planned safe flight state analyses. 417.219 Section 417.219 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION... flight to a condition where the launch vehicle's hazardous debris impact dispersion extends to any...

14 CFR 417.219 - Data loss flight time and planned safe flight state analyses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Data loss flight time and planned safe flight state analyses. 417.219 Section 417.219 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION... flight to a condition where the launch vehicle's hazardous debris impact dispersion extends to any...

Investigating Coastal Processes and Hazards Along the Coastline of Ghana, West Africa (Invited)

NASA Astrophysics Data System (ADS)

Hapke, C. J.; Ashton, A. D.; Wiafe, G.; Addo, K. A.; Ababio, S.; Agyekum, K. A.; Lippmann, T. C.; Roelvink, J.

2010-12-01

As with many coastlines worldwide, erosion is a chronic issue along the Ghana coast. Erosion is presently impacting coastal infrastructure ranging from urban areas to small fishing villages, and threatening important cultural and historical resources in some locales. The Ghanaian coast displays significant geomorphological variability, ranging from rocky and bluffed shores to low-lying barrier beaches. Rates and trends of coastal change vary along the coast, interacting with physical oceanographic processes, alongshore sediment transport gradients, and anthropogenic disruptions of sediment supply. Little data are available for the systematic assessment of the relative importance of the various factors controlling coastal change, and thus the understanding of erosion threats and the response has been haphazard and inconsiderate of the system as a whole. Information on historical coastal change rates, alongshore geomorphic and geologic variation, sediment budgets, wave climates and other factors that shape the coast is limited. An enhanced understanding of basic coastal processes is critical as development pressures, including eco- and cultural tourism, and oil and gas exploration, continue to increase. An initiative is underway to develop a more comprehensive scientific understanding of coastal processes along the Ghana coastline. An international team of scientists, working in collaboration with researchers at the University of Ghana, are building the data- and knowledge-base required for a holistic and systematic assessment to understand coastal change and its driving forces. The approach includes regional analyses of shoreline change, field mapping of geology and geomorphology, short-term monitoring surveys, collection of geophysical data, deployment of a remote camera system, deployment of a directional wave buoy, and regional hydrodynamic modeling. These data and analyses will ultimately provide the foundation needed to make informed decisions on managing the coast and responding to erosion issues. Funding for program development and equipment has been provided via the Coastal Geosciences Program of the U.S. Office of Naval Research through the Navy’s Africa Partnership Station. Data collection and analysis to date include the first regional shoreline change assessment of the Ghana coast, utilizing aerial photography spanning 31 years and RTK-GPS field surveys and reconnaissance mapping. Initial results from the shoreline change analysis indicate highly variable alongshore rates of change, although the trend is predominantly erosional. The highest erosion rates are found in the east, on the downdrift flank of the low-lying, sandy Volta Delta complex. The rapid erosion rates are likely due to the disruption of sediment supplied to the coast by the damming of the Volta River in the 1960s, as well as alongshore transport gradients generated by the progradation and morphologic evolution of the delta. Continuing investigations of coastal processes in Ghana will allow for a better understanding of erosion hazards and will aid in the development of appropriate, systematic, and sustainable responses to future increased hazards associated with rising sea-levels.

Environmental management of industrial hazardous wastes in India.

PubMed

Dutta, Shantanu K; Upadhyay, V P; Sridharan, U

2006-04-01

Hazardous wastes are considered highly toxic and therefore disposal of such wastes needs proper attention so as to reduce possible environmental hazards. Industrial growth has resulted in generation of huge volume of hazardous wastes in the country. In addition to this, hazardous wastes sometimes get imported mainly from the western countries for re-processing or recycling. Inventorisation of hazardous wastes generating units in the country is not yet completed. Scientific disposal of hazardous wastes has become a major environmental issue in India. Hazardous Wastes (Management and Handling) Rules, 1989 have been framed by the Central Government and amended in 2000 and 2003 to deal with the hazardous wastes related environmental problems that may arise in the near future. This paper gives details about the hazardous wastes management in India. Health effects of the selected hazardous substances are also discussed in the paper.

40 CFR 63.1326 - Batch process vents-recordkeeping provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins... requirements for Group 2 batch process vents that are exempt from the batch mass input limitation provisions...

Multi-factor evaluation indicator method for the risk assessment of atmospheric and oceanic hazard group due to the attack of tropical cyclones

NASA Astrophysics Data System (ADS)

Qi, Peng; Du, Mei

2018-06-01

China's southeast coastal areas frequently suffer from storm surge due to the attack of tropical cyclones (TCs) every year. Hazards induced by TCs are complex, such as strong wind, huge waves, storm surge, heavy rain, floods, and so on. The atmospheric and oceanic hazards cause serious disasters and substantial economic losses. This paper, from the perspective of hazard group, sets up a multi-factor evaluation method for the risk assessment of TC hazards using historical extreme data of concerned atmospheric and oceanic elements. Based on the natural hazard dynamic process, the multi-factor indicator system is composed of nine natural hazard factors representing intensity and frequency, respectively. Contributing to the indicator system, in order of importance, are maximum wind speed by TCs, attack frequency of TCs, maximum surge height, maximum wave height, frequency of gusts ≥ Scale 8, rainstorm intensity, maximum tidal range, rainstorm frequency, then sea-level rising rate. The first four factors are the most important, whose weights exceed 10% in the indicator system. With normalization processing, all the single-hazard factors are superposed by multiplying their weights to generate a superposed TC hazard. The multi-factor evaluation indicator method was applied to the risk assessment of typhoon-induced atmospheric and oceanic hazard group in typhoon-prone southeast coastal cities of China.

Framework for Automation of Hazard Log Management on Large Critical Projects

NASA Astrophysics Data System (ADS)

Vinerbi, Lorenzo; Babu, Arun P.

2016-08-01

Hazard log is a database of all risk management activities in a project. Maintaining its correctness and consistency on large safety/mission critical projects involving multiple vendors, suppliers, and partners is critical and challenging. IBM DOORS is one of the popular tool used for hazard management in space applications. However, not all stake- holders are familiar with it. Also, It is not always feasible to expect all stake-holders to provide correct and consistent hazard data.The current work describes the process and tools to simplify the process of hazard data collection on large projects. It demonstrates how the collected data from all stake-holders is merged to form the hazard log while ensuring data consistency and correctness.The data provided by all parties are collected using a template containing scripts. The scripts check for mistakes based on internal standards of company in charge of hazard management. The collected data is then subjected to merging in DOORS, which also contain scripts to check and import data to form the hazard log. The proposed tool has been applied to a mission critical project, and has been found to save time and reduce the number of mistakes while creating the hazard log. The use of automatic checks paves the way for correct tracking of risk and hazard analysis activities for large critical projects.

Near-real-time Earthquake Notification and Response in the Classroom: Exploiting the Teachable Moment

NASA Astrophysics Data System (ADS)

Furlong, K. P.; Whitlock, J. S.; Benz, H. M.

2002-12-01

Earthquakes occur globally, on a regular but (as yet) non-predictable basis, and their effects are both dramatic and often devastating. Additionally they serve as a primary tool to image the earth and define the active processes that drive tectonics. As a result, earthquakes can be an extremely effective tool for helping students to learn about active earth processes, natural hazards, and the myriad of issues that arise with non-predictable but potentially devastating natural events. We have developed and implemented a real-time earthquake alert system (EAS) built on the USGS Earthworm system to bring earthquakes into the classroom. Through our EAS, students in our General Education class on Natural Hazards (Earth101 - Natural Disasters: Hollywood vs. Reality) participate in earthquake response activities in ways similar to earthquake hazard professionals - they become part of the response to the event. Our implementation of the Earthworm system allows our students to be paged via cell-phone text messaging (Yes, we provide cell phones to the 'duty seismologists'), and they respond to those pages as appropriate for their role. A parallel web server is maintained that provides the earthquake details (location maps, waveforms etc.) and students produce time-critical output such as news releases, analyses of earthquake trends in the region, and reports detailing implications of the events. Since this is a course targeted at non-science majors, we encourage that they bring their own expertise into the analyses. For example, business of economic majors may investigate the economic impacts of an earthquake, secondary education majors may work on teaching modules based on the information they gather etc. Since the students know that they are responding to real events they develop ownership of the information they gather and they recognize the value of real-time response. Our educational goals in developing this system include: (1) helping students develop a sense of the global distribution and impact of natural hazards, and the implications of non-predictable events; (2) encouraging students to think about how understanding science related events can be crucially important in analyzing societal issues; and (3) developing an approach to understanding important earth science topics in a way in which students 'own' their data, and are entrained into thinking about linkages between science and society. Finally, systems such as our real-time earthquake alert system take science out of the classroom and into the students lives. What better way to broaden the discussion of science, and bring earth science issues to center stage then to have a student receive an earthquake alert when she is socializing on a Friday evening at a campus hangout!

40 CFR 270.65 - Research, development, and demonstration permits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) SOLID WASTES (CONTINUED) EPA ADMINISTERED PERMIT PROGRAMS: THE HAZARDOUS WASTE PERMIT PROGRAM... may issue a research, development, and demonstration permit for any hazardous waste treatment facility which proposes to utilize an innovative and experimental hazardous waste treatment technology or process...

40 CFR 270.65 - Research, development, and demonstration permits.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SOLID WASTES (CONTINUED) EPA ADMINISTERED PERMIT PROGRAMS: THE HAZARDOUS WASTE PERMIT PROGRAM... may issue a research, development, and demonstration permit for any hazardous waste treatment facility which proposes to utilize an innovative and experimental hazardous waste treatment technology or process...

OVERVIEW OF HAZARDOUS/TOXIC WASTE INCINERATION

EPA Science Inventory

Effective hazardous/toxic waste disposal and safe dumpsite cleanup are two of EPA's major missions in the 1980s. Incineration has been recognized as a very efficient process to destroy the hazardous wastes generated by industry or by the dumpsite remediations. The paper provides ...

Discrete mathematical data analysis approach: a valuable assessment method for sustainable chemistry.

PubMed

Voigt, Kristina; Scherb, Hagen; Bruggemann, Rainer; Schramm, Karl-Werner

2013-06-01

Sustainable/Green Chemistry is a chemical philosophy encouraging the design of products and processes that reduce or eliminate the use and generation of hazardous substances. In this respect, metrical scientific disciplines like Chemometrics are important, because they indicate criteria for chemicals being hazardous or not. We demonstrated that sustainable principles in the disciplines Green Chemistry, Green Engineering, and Sustainability in Information Technology have main aspects in common. The use of non-hazardous chemicals or the more efficient use of chemical substances is one of these aspects. We take a closer look on the topic of the hazards of chemical substances. Our research focuses on data analyses concerning environmental chemicals named Persistent Organic Pollutants (POPs), which are found all over the world and pose a large risk to environment as well as to humans. The evaluation of the data is a major step in the elucidation of the danger of these chemicals. The data analysis method demonstrated here, is based on the theory of partially ordered sets and provides a generalized ranking. In our approach we investigate data sets of breast milk samples of women in Denmark, Finland, and Turkey which contained measurable levels of 20 POPs. The goal is twofold: On the one side the hazardous chemicals are to be identified and on the other side possible differences among the three nations should be detected, because in that case possible different uptake mechanisms may be supposed. The data analysis is performed by the free available software package PyHasse, written by the third author. We conclude that the data analysis method can well be applied for distinguishing between more or less dangerous existing chemicals. Furthermore, it should be used in sustainable chemistry in the same manner for detecting more and less sustainable chemicals. Copyright © 2013 Elsevier B.V. All rights reserved.

Geological hazard monitoring system in Georgia

NASA Astrophysics Data System (ADS)

Gaprindashvili, George

2017-04-01

Georgia belongs to one of world's most complex mountainous regions according to the scale and frequency of Geological processes and damage caused to population, farmlands, and Infrastructure facilities. Geological hazards (landslide, debrisflow/mudflow, rockfall, erosion and etc.) are affecting many populated areas, agricultural fields, roads, oil and gas pipes, high-voltage electric power transmission towers, hydraulic structures, and tourist complexes. Landslides occur almost in all geomorphological zones, resulting in wide differentiation in the failure types and mechanisms and in the size-frequency distribution. In Georgia, geological hazards triggered by: 1. Activation of highly intense earthquakes; 2. Meteorological events provoking the disaster processes on the background of global climatic change; 3. Large-scale Human impact on the environment. The prediction and monitoring of Geological Hazards is a very wide theme, which involves different researchers from different spheres. Geological hazard monitoring is essential to prevent and mitigate these hazards. In past years in Georgia several monitoring system, such as Ground-based geodetic techniques, Debrisflow Early Warning System (EWS) were installed on high sensitive landslide and debrisflow areas. This work presents description of Geological hazard monitoring system in Georgia.

NASA/ASEE Summer Faculty Fellowship Program. 1991 Research Reports

NASA Technical Reports Server (NTRS)

Hosler, E. Ramon (Editor); Beymer, Mark A. (Editor); Armstrong, Dennis W. (Editor)

1991-01-01

Reports from the NASA/ASEE Summer Faculty Fellowship Program are presented. The editors are responsible for selecting appropriately qualified faculty to address some of the many problems of current interest to NASA Kennedy. Some representative titles are as follows: Development of an Accelerated Test Method for the Determination of Susceptibility to Atmospheric Corrosion; Hazardous Gas Leak Analysis in the Space Shuttle; Modeling and Control of the Automated Radiator Inspection Device; Study of the Finite Element Software Packages at KSC; Multispectral Image Processing for Plants; Algorithms for Contours Depicting Static Electric Fields during Adverse Weather Conditions; Transient Study of a Cryogenic Hydrogen Filling System; and Precision Cleaning Verification of Nonvolatile Residues by using Water, Ultrasonics, and Turbidity Analyses.

Long-term unprocessed and processed red meat consumption and risk of chronic obstructive pulmonary disease: a prospective cohort study of women.

PubMed

Kaluza, Joanna; Harris, Holly; Linden, Anders; Wolk, Alicja

2018-03-12

Limited studies have examined red meat consumption in relation to risk of chronic obstructive pulmonary disease (COPD), and none have examined the impact of long-term diet on COPD risk. We sought to investigate the association between long-term red meat consumption and risk of COPD. The population-based prospective Swedish Mammography Cohort included 34,053 women, aged 48-83 years, followed for the current analyses from 2002 to 2014. Unprocessed and processed red meat consumption was assessed with a self-administered questionnaire in 1987 and 1997. Cox proportional hazard models were used to estimate hazard ratios (HRs) and 95% confidence intervals (CIs). Over a mean follow-up of 11.6 years (2002-2014; 393,831 person-years), 1488 COPD cases were ascertained via linkage to the Swedish health registers. A positive association between long-term processed red meat (average from 1987 to 1997) and risk of COPD was observed. In contrast, no association was observed with unprocessed red meat with corresponding HRs of 1.36 (95% CI 1.03-1.79) for processed and 0.87 (95% CI 0.74-1.02) for unprocessed red meat among women who consumed ≥ 50 g/day compared to < 25 g/day. The observed association with processed meat was confined to ex-smokers (P for interaction = 0.30); women consuming of ≥ 50 g/day of processed meat had a 2.3-fold (95% CI 1.24-4.12) higher risk of COPD than those consuming < 25 g/day. No similar associations were observed among current or never smokers. In this prospective cohort of women with moderate red meat consumption, long-term processed red meat consumption was associated with an increased risk of COPD particularly among ex-smokers.

Unprocessed red meat and processed meat consumption and risk of stroke in the Spanish cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC).

PubMed

Amiano, P; Chamosa, S; Etxezarreta, N; Arriola, L; Sánchez, M-J; Ardanaz, E; Molina-Montes, E; Chirlaque, M-D; Moreno-Iribas, C; Huerta, J-M; Egües, N; Navarro, C; Requena, M; Quirós, J-R; Fonseca-Nunes, A; Jakszyn, P; González, C-A; Dorronsoro, M

2016-03-01

High intakes of unprocessed red or processed meat may increase the risk of stroke. We aimed to examine the association between unprocessed red meat, processed meat and total red meat consumption and risk of total stroke and ischaemic stroke. Cox proportional hazards regression analyses were conducted based on the data for 41,020 men and women aged 29-69 years at baseline. During a mean follow-up of 13.8 years, 674 incident cases of stroke (531 ischaemic strokes, 79 haemorrhagic strokes, 42 subarachnoid haemorrhages and 22 mixed or unspecified events) were identified. After multiple adjustment, unprocessed red meat, processed meat and total red meat consumption were not correlated with incidence of total stroke or ischaemic stroke in either men or women. The hazard ratios (HRs) for unprocessed red meat and processed meat and risk of total stroke comparing the highest with the lowest quintiles were, respectively, 0.81 (95% confidence interval (CI) 0.54-1.21; P-trend=0.15) and 0.92 (95% CI 0.64-1.32; P-trend=0.82) in men and 1.21 (95% CI 0.79-1.85; P-trend=0.10) and 0.81 (95% CI 0.51-1.27; P-trend=0.17) in women. The HRs for unprocessed red meat and processed meat and risk of ischaemic stroke were, respectively, 0.80 (95% CI 0.51-1.25; P-trend=0.51) and 0.86 (95% CI 0.57-1.29; P-trend=0.77) in men and 1.24 (95% CI 0.74-2.05; P-trend=0.13) and 0.82 (95% CI 0.47-1.42; P-trend=0.31) in women. In the Spanish European Prospective Investigation into Cancer and Nutrition (EPIC) cohort, unprocessed red meat and processed meat consumption were not associated with risk of stroke in men or women.

Ocular hazards of industrial spot welding.

PubMed

Chou, B R; Cullen, A P

1996-06-01

Any welding process is perceived to be a radiation hazard to the eye. Site visits were made to an automotive assembly plant to assess the levels of optical radiation and other hazards on the production line. Measurements were taken with a scanning spectro-radiometer and optical power and energy meters at operating working distances at spot welding stations where nonrobotic procedures were performed. Ultraviolet (UV) irradiance levels produced while spot welding with electrodes operating at 10 to 15 kA and 10 to 20 V were several orders of magnitude below recommended safety limits for industrial exposure. Flashes were rich in visible light and infrared (IR) radiation, but not at hazardous levels. The principal hazards in manual spot welding with high-current electrodes are high-speed droplets of molten metal produced by the process. These are easily defended against by wraparound polycarbonate eye shields.

Potential hazards in smoke-flavored fish

NASA Astrophysics Data System (ADS)

Lin, Hong; Jiang, Jie; Li, Donghua

2008-08-01

Smoking is widely used in fish processing for the color and flavor. Smoke flavorings have evolved as a successful alternative to traditional smoking. The hazards of the fish products treated by liquid-smoking process are discussed in this review. The smoke flavoring is one important ingredient in the smoke-flavored fish. This paper gives the definition of smoke flavorings and the hazard of polycyclic aromatic hydrocarbons (PAHs) residue in the smoke flavorings on the market. It gives also an assessment of chemical hazards such as carcinogenic PAHs, especially Benzo-[ a]pyrene, as well as biological hazards such as Listeria monocytogenes, Clostridium botulinum, histamine and parasites in smoke-flavored fish. The limitations in regulations or standards are discussed. Smoke flavored fish have lower content of PAHs as compared with the traditional smoking techniques if the PAHs residue in smoke flavorings is controlled by regulations or standards.

Embedding Scientific Integrity and Ethics into the Scientific Process and Research Data Lifecycle

NASA Astrophysics Data System (ADS)

Gundersen, L. C.

2016-12-01

Predicting climate change, developing resources sustainably, and mitigating natural hazard risk are complex interdisciplinary challenges in the geosciences that require the integration of data and knowledge from disparate disciplines and scales. This kind of interdisciplinary science can only thrive if scientific communities work together and adhere to common standards of scientific integrity, ethics, data management, curation, and sharing. Science and data without integrity and ethics can erode the very fabric of the scientific enterprise and potentially harm society and the planet. Inaccurate risk analyses of natural hazards can lead to poor choices in construction, insurance, and emergency response. Incorrect assessment of mineral resources can bankrupt a company, destroy a local economy, and contaminate an ecosystem. This paper presents key ethics and integrity questions paired with the major components of the research data life cycle. The questions can be used by the researcher during the scientific process to help ensure the integrity and ethics of their research and adherence to sound data management practice. Questions include considerations for open, collaborative science, which is fundamentally changing the responsibility of scientists regarding data sharing and reproducibility. The publication of primary data, methods, models, software, and workflows must become a norm of science. There are also questions that prompt the scientist to think about the benefit of their work to society; ensuring equity, respect, and fairness in working with others; and always striving for honesty, excellence, and transparency.

Spatial earthquake hazard assessment of Evansville, Indiana

USGS Publications Warehouse

Rockaway, T.D.; Frost, J.D.; Eggert, D.L.; Luna, R.

1997-01-01

The earthquake hazard has been evaluated for a 150-square-kilometer area around Evansville, Indiana. GIS-QUAKE, a system that combines liquefaction and ground motion analysis routines with site-specific geological, geotechnical, and seismological information, was used for the analysis. The hazard potential was determined by using 586 SPT borings, 27 CPT sounding, 39 shear-wave velocity profiles and synthesized acceleration records for body-wave magnitude 6.5 and 7.3 mid-continental earthquakes, occurring at distances of 50 km and 250 km, respectively. The results of the GIS-QUAKE hazard analyses for Evansville identify areas with a high hazard potential that had not previously been identified in earthquake zonation studies. The Pigeon Creek area specifically is identified as having significant potential for liquefaction-induced damage. Damage as a result of ground motion amplification is determined to be a moderate concern throughout the area. Differences in the findings of this zonation study and previous work are attributed to the size and range of the database, the hazard evaluation methodologies, and the geostatistical interpolation techniques used to estimate the hazard potential. Further, assumptions regarding the groundwater elevations made in previous studies are also considered to have had a significant effect on the results.

Safeguarding Cultural Heritage against Climate Change and Natural Hazards through Stakeholder Involvement

NASA Astrophysics Data System (ADS)

de Wit, Rosmarie; Zuvela-Aloise, Maja; Hollosi, Brigitta; Anders, Ivonne; Höfler, Angelika; Boi, Silvia; Resta, Vanni; Patrikakis, Charalampos

2017-04-01

Europe's cultural heritage is among the richest in the world, and draws millions of visitors to archeological sites, museums, monuments, castles, and other sites each year. The protection and conservation of European heritage is of utmost importance for our society, not only in order to preserve the European cultural identity, but also because cultural heritage is a wealth creator bringing tourism-related business opportunities on which many communities depend. However, Europe's heritage assets are extremely exposed to climate change and natural hazards, which threatens their integrity and may compromise their value. The goal of the STORM (Safeguarding Cultural Heritage through Technical and Organisational Management) project is to provide critical decision-making tools to European cultural heritage stakeholders affected by climate change and natural hazards. Here, the STORM project will be presented with a focus on climate change and natural hazard risk communication to the involved stakeholders. However, climate change communication is not a one-way process, and discussions with stakeholders are necessary to identify their specific needs. Hence, the STORM concept is tested through pilot site studies in five different countries: the Diocletian Baths in Rome, Italy; the Mellor Heritage site, Manchester, UK; the Roman Ruins of Tróia, Portugal; the Historical Centre of Rethymno on Crete, Greece and Ephesus, Izmir, Turkey. Furthermore, the past and future climatic conditions at the project's pilot sites are analysed in terms of mean state and extreme events (for example temperature and precipitation changes evident from observations and climate scenarios), which will be discussed with regard to their relevance for the local cultural heritage protection based on discussions with the stakeholders.

Construction safety monitoring based on the project's characteristic with fuzzy logic approach

NASA Astrophysics Data System (ADS)

Winanda, Lila Ayu Ratna; Adi, Trijoko Wahyu; Anwar, Nadjadji; Wahyuni, Febriana Santi

2017-11-01

Construction workers accident is the highest number compared with other industries and falls are the main cause of fatal and serious injuries in high rise projects. Generally, construction workers accidents are caused by unsafe act and unsafe condition that can occur separately or together, thus a safety monitoring system based on influencing factors is needed to achieve zero accident in construction industry. The dynamic characteristic in construction causes high mobility for workers while doing the task, so it requires a continuously monitoring system to detect unsafe condition and to protect workers from potential hazards. In accordance with the unique nature of project, fuzzy logic approach is one of the appropriate methods for workers safety monitoring on site. In this study, the focus of discussion is based on the characteristic of construction projects in analyzing "potential hazard" and the "protection planning" to be used in accident prevention. The data have been collected from literature review, expert opinion and institution of safety and health. This data used to determine hazard identification. Then, an application model is created using Delphi programming. The process in fuzzy is divided into fuzzification, inference and defuzzification, according to the data collection. Then, the input and final output data are given back to the expert for assessment as a validation of application model. The result of the study showed that the potential hazard of construction workers accident could be analysed based on characteristic of project and protection system on site and fuzzy logic approach can be used for construction workers accident analysis. Based on case study and the feedback assessment from expert, it showed that the application model can be used as one of the safety monitoring tools.

Influence of warning information changes on emergency response

NASA Astrophysics Data System (ADS)

Heisterkamp, Tobias; Ulbrich, Uwe; Glade, Thomas; Tetzlaff, Gerd

2014-05-01

Mitigation and risk reduction of natural hazards is significantly related to the possibility of predicting the actual event. Some hazards can already be forecasted several days in advance. For these hazards, early warning systems have been developed, installed and improved over the years. The formation of winter storms for example can be recognized up to one week before they pass through Central Europe. This relative long early warning time has the advantage that forecasters can concretise the warnings over time. Therefore, warnings can even be adapted to alternating conditions within the process, the observation or changes in its modelling. Emergency managers are one group of warning recipients in the civil protection sector. They have to prepare or initiate prevention or response measures at a specific point of time, depending on the required lead time of the referring actions. At this point of time already, the forecast and its equivalent warning, has to be assumed as a stage of reality, hence the decision-makers have to come to a conclusion. These decisions are based on spatial and temporal knowledge of the forecasted event and the consequential situation of risk. With incoming warning updates, the detailed status of information is permanently being alternated. Consequently, decisions can be influenced by the development of the warning situation and the inherent tendency before a certain point of time. They can also be adapted to updates later on, according to the changing 'decision reality'. The influence of these dynamic hazard situations on operational planning and response by emergency managers is investigated in case studies on winter storms for Berlin, Germany. Therefore, the issued warnings by the weather service and data of operation of Berlin Fire Brigades are analysed and compared. This presentation shows and discusses first results.

An Application of the SSHAC Level 3 Process to the Probabilistic Seismic Hazard Analysis for Nuclear Facilities at the Hanford Site, Eastern Washington, USA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coppersmith , Kevin J.; Bommer, Julian J.; Bryce, Robert W.

Under the sponsorship of the US Department of Energy (DOE) and the electric utility Energy Northwest, the Pacific Northwest National Laboratory (PNNL) is conducting a probabilistic seismic hazard analysis (PSHA) within the framework of a SSHAC Level 3 procedure (Senior Seismic Hazard Analysis Committee; Budnitz et al., 1997). Specifically, the project is being conducted following the guidelines and requirements specified in NUREG-2117 (USNRC, 2012b) and consistent with approach given in the American Nuclear Standard ANSI/ANS-2.29-2008 Probabilistic Seismic Hazard Analysis. The collaboration between DOE and Energy Northwest is spawned by the needs of both organizations for an accepted PSHA with highmore » levels of regulatory assurance that can be used for the design and safety evaluation of nuclear facilities. DOE committed to this study after performing a ten-year review of the existing PSHA, as required by DOE Order 420.1C. The study will also be used by Energy Northwest as a basis for fulfilling the NRC’s 10CFR50.54(f) requirement that the western US nuclear power plants conduct PSHAs in conformance with SSHAC Level 3 procedures. The study was planned and is being carried out in conjunction with a project Work Plan, which identifies the purpose of the study, the roles and responsibilities of all participants, tasks and their associated schedules, Quality Assurance (QA) requirements, and project deliverables. New data collection and analysis activities are being conducted as a means of reducing the uncertainties in key inputs to the PSHA. It is anticipated that the results of the study will provide inputs to the site response analyses at multiple nuclear facility sites within the Hanford Site and at the Columbia Generating Station.« less

PHYTOREMEDIATION OF CONTAMINATED SOIL AND GROUND WATER AT HAZARDOUS WASTE SITES

EPA Science Inventory

The purpose of this issue paper is to provide a concise discussion of the processes associated with the use of phytoremediation as a cleanup or containment technique for remediation of hazardous waste sites. Introductory material on plant processes is provided. The different fo...

40 CFR 63.2855 - How do I determine the quantity of oilseed processed?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for... following an operating month, you must determine the tons as received of each listed oilseed processed for...

40 CFR 63.2855 - How do I determine the quantity of oilseed processed?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for... following an operating month, you must determine the tons as received of each listed oilseed processed for...

40 CFR 63.2855 - How do I determine the quantity of oilseed processed?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for... following an operating month, you must determine the tons as received of each listed oilseed processed for...

Enforcement Alert: Hazardous Waste Management Practices at Mineral Processing Facilities Under Scrutiny by U.S. EPA; EPA Clarifies 'Bevill Exclusion' Wastes and Establishes Disposal Standards

EPA Pesticide Factsheets

This is the enforcement alert for Hazardous Waste Management Practices at Mineral Processing Facilities Under Scrutiny by U.S. EPA; EPA Clarifies 'Bevill Exclusion' Wastes and Establishes Disposal Standards

Comparative hazard evaluation of near-infrared diode lasers.

PubMed

Marshall, W J

1994-05-01

Hazard evaluation methods from various laser protection standards differ when applied to extended-source, near-infrared lasers. By way of example, various hazard analyses are applied to laser training systems, which incorporate diode lasers, specifically those that assist in training military or law enforcement personnel in the proper use of weapons by simulating actual firing by the substitution of a beam of near-infrared energy for bullets. A correct hazard evaluation of these lasers is necessary since simulators are designed to be directed toward personnel during normal use. The differences among laser standards are most apparent when determining the hazard class of a laser. Hazard classification is based on a comparison of the potential exposures with the maximum permissible exposures in the 1986 and 1993 versions of the American National Standard for the Safe Use of Lasers, Z136.1, and the accessible emission limits of the federal laser product performance standard. Necessary safety design features of a particular system depend on the hazard class. The ANSI Z136.1-1993 standard provides a simpler and more accurate hazard assessment of low-power, near-infrared, diode laser systems than the 1986 ANSI standard. Although a specific system is evaluated, the techniques described can be readily applied to other near-infrared lasers or laser training systems.

40 CFR 63.2830 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil Production What This Subpart... standards for hazardous air pollutants (NESHAP) for emissions during vegetable oil production. This subpart limits hazardous air pollutant (HAP) emissions from specified vegetable oil production processes. This...

40 CFR 63.2830 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil Production What This Subpart... standards for hazardous air pollutants (NESHAP) for emissions during vegetable oil production. This subpart limits hazardous air pollutant (HAP) emissions from specified vegetable oil production processes. This...

RFID technology for hazardous waste management and tracking.

PubMed

Namen, Anderson Amendoeira; Brasil, Felipe da Costa; Abrunhosa, Jorge José Gouveia; Abrunhosa, Glaucia Gomes Silva; Tarré, Ricardo Martinez; Marques, Flávio José Garcia

2014-09-01

The illegal dumping of hazardous waste is one of the most concerning occurrences related to illegal waste activities. The waste management process is quite vulnerable, especially when it comes to assuring the right destination for the delivery of the hazardous waste. The purpose of this paper is to present a new system design and prototype for applying the RFID technology so as to guarantee the correct destination for the hazardous waste delivery. The aim of this innovative approach, compared with other studies that employ the same technology to the waste disposal process, is to focus on the certification that the hazardous waste will be delivered to the right destination site and that no inappropriate disposal will occur in the transportation stage. These studies were carried out based on data collected during visits to two hazardous waste producer companies in Brazil, where the material transportation and delivery to a company in charge of the waste disposal were closely monitored. © The Author(s) 2014.

Canadian Innovations in Siting Hazardous Waste Management Facilities

PubMed

Kuhn; Ballard

1998-07-01

/ Siting hazardous waste facilities is an extremely complex and difficult endeavor. Public aversion to the construction of these facilities in or near their community often results in concerted opposition, referred to as the NIMBY syndrome. For the most part, siting processes do not fail because of inadequate environmental or technical considerations, but because of the adversarial decision-making strategies employed by the proponents. Innovative siting processes used in the provinces of Alberta and Manitoba offer tangible evidence of the successful application of an innovative siting approach based on the principles of decentralization of decision-making authority and full and meaningful public involvement. The purpose of this paper is to evaluate four Canadian siting processes from the perspective of public participation and access to decision-making authority. Examples of siting processes related to hazardous waste management facilities are provided from the provinces of Alberta, Manitoba, British Columbia, and Ontario. Siting has evolved from approaches dominated by top-down decision making to increasing decentralized and pluralistic approaches. Focusing on social and political concerns of potentially affected communities and on the process of decision making itself are fundamental to achieving siting success. In Alberta initially, and later in Manitoba, this new "open approach" to siting has resulted in the construction of the first two comprehensive hazardous waste treatment facilities in Canada.KEY WORDS: Hazardous waste facilities; Siting methodologies; Public participation

Digital geomorphological landslide hazard mapping of the Alpago area, Italy

NASA Astrophysics Data System (ADS)

van Westen, Cees J.; Soeters, Rob; Sijmons, Koert

Large-scale geomorphological maps of mountainous areas are traditionally made using complex symbol-based legends. They can serve as excellent "geomorphological databases", from which an experienced geomorphologist can extract a large amount of information for hazard mapping. However, these maps are not designed to be used in combination with a GIS, due to their complex cartographic structure. In this paper, two methods are presented for digital geomorphological mapping at large scales using GIS and digital cartographic software. The methods are applied to an area with a complex geomorphological setting on the Borsoia catchment, located in the Alpago region, near Belluno in the Italian Alps. The GIS database set-up is presented with an overview of the data layers that have been generated and how they are interrelated. The GIS database was also converted into a paper map, using a digital cartographic package. The resulting largescale geomorphological hazard map is attached. The resulting GIS database and cartographic product can be used to analyse the hazard type and hazard degree for each polygon, and to find the reasons for the hazard classification.

Rock slope instabilities in Norway: First systematic hazard and risk classification of 22 unstable rock slopes

NASA Astrophysics Data System (ADS)

Böhme, Martina; Hermanns, Reginald L.; Oppikofer, Thierry; Penna, Ivanna

2016-04-01

Unstable rock slopes that can cause large failures of the rock-avalanche type have been mapped in Norway for almost two decades. Four sites have earlier been characterized as high-risk objects based on expertise of few researchers. This resulted in installing continuous monitoring systems and set-up of an early-warning system for those four sites. Other unstable rock slopes have not been ranked related to their hazard or risk. There are ca. 300 other sites known of which 70 sites were installed for periodic deformation measurements using multiple techniques (Global Navigation Satellite Systems, extensometers, measurement bolts, and others). In 2012 a systematic hazard and risk classification system for unstable rock slopes was established in Norway and the mapping approach adapted to that in 2013. Now, the first 22 sites were classified for hazard, consequences and risk using this classification system. The selection of the first group of sites to be classified was based on an assumed high hazard or risk and importance given to the sites by Norwegian media and the public. Nine of the classified 22 unstable rock slopes are large sites that deform inhomogeneously or are strongly broken up in individual blocks. This suggests that different failure scenarios are possible that need to be analyzed individually. A total of 35 failure scenarios for those nine unstable rock slopes were considered. The hazard analyses were based on 9 geological parameters defined in the classification system. The classification system will be presented based on the Gamanjunni unstable rock slope. This slope has a well developed back scarp that exposes 150 m preceding displacement. The lateral limits of the unstable slope are clearly visible in the morphology and InSAR displacement data. There have been no single structures observed that allow sliding kinematically. The lower extend of the displacing rock mass is clearly defined in InSAR data and by a zone of higher rock fall activity. Yearly average displacement rates of up to 6 cm are measured with differential GNSS and InSAR. Cosmogenic nuclide dating suggests an acceleration of the present displacement compared to the average displacement since the initiation of the gravitational movement approximately 7000 years ago. Furthermore, there exists a pre-historic rock avalanche 3 km north along the same slope. These characteristics result in a very high hazard for the Gamanjunni unstable rock slope. The consequence analyses focus on the possibility of life loss only. For this the number of persons in the area that can be affected by either the rock slope failure itself and/or its secondary consequence of a displacement wave in case that a rock slope failure would hit a water body is estimated. For Gamanjunni the direct consequences are approximately 40 casualties, representing medium consequences. A total of 48 scenarios were finally analyzed for hazard, consequences and risk. The results are plotted in a risk matrix with 5 hazard and 5 consequence classes, leading to 4 risk classes. One unstable rock slope was classified as very high hazard, 9 scenarios as high hazard, 25 as medium hazard and 13 as low hazard, while none were classified as very low hazard. The consequence analyses for those scenarios resulted in 5 scenarios with very high consequences (>1000 potential casualties), 13 scenarios with high consequences (100-1000 casualties), 9 scenarios with medium consequences (10-100 casualties), 6 scenarios with low consequences (1-10 casualties) and 15 scenarios with very low consequences (0-1 casualties). This resulted in a high risk for 6 scenarios, medium to high risk for 16 scenarios, medium risk for 7 scenarios and low risk for 19 scenarios. These results allow determining which unstable rock slopes do not require further follow-up and on which further investigations and/or mitigation measures should be considered.

Science in Society: Bridging the gap to connect science to decision makers

NASA Astrophysics Data System (ADS)

Jones, L.; Bwarie, J.; Pearce, I.

2016-12-01

The gap between science and decision making in our society can be large and multi-faceted, involving communication, process, cultural and even subconscious differences. In sweeping generalization, scientists reject anecdotes, focus on uncertainty and details, and expect conflict as part of the scientific process, while non-scientists respond to stories, want certainty and the big picture, and see conflict as a reason to reject the message. Bridging this gap often requires ongoing collaboration to find the intersection of three independent domains: what science can provide, the technical information decision makers need to make the most effective choices and what information decision makers need to motivate action. For ten years, the USGS has experimented with improving the usefulness of its science through the SAFRR (Science Application for Risk Reduction) Project and its predecessor, the Multi Hazards Demonstration Project in Southern California. Through leading and participating in these activities, we have recognized 3 steps that have been essential to successful partnerships between scientists and decision makers. First, determining what makes for a successful product cannot be done in isolation by either scientists or users. The users may want something science cannot produce (e.g., accurate short-term earthquake predictions), while the scientists can fail to see that the product they know how to make may not be relevant to the decisions that need to be made. Real discussions with real exchange and absorption of information on both sides makes for the most useful products. Second, most scientific results need work beyond what belongs in a journal to create a product that can be used. This is not just a different style of communication, but analyses that focus on the community's local questions rather than on scientific advances. Third, probabilities of natural hazards almost never motivate action to mitigate. The probabilities are usually low on human time scales and focus on the uncertainty, conveying a strong message that the hazard may not happen. Presenting the hazard as absolutely certain to occur, just on an unknown time scale is scientifically identical, but conveys a very different emotional message.

When probabilistic seismic hazard climbs volcanoes: the Mt. Etna case, Italy - Part 1: Model components for sources parameterization

NASA Astrophysics Data System (ADS)

Azzaro, Raffaele; Barberi, Graziella; D'Amico, Salvatore; Pace, Bruno; Peruzza, Laura; Tuvè, Tiziana

2017-11-01

The volcanic region of Mt. Etna (Sicily, Italy) represents a perfect lab for testing innovative approaches to seismic hazard assessment. This is largely due to the long record of historical and recent observations of seismic and tectonic phenomena, the high quality of various geophysical monitoring and particularly the rapid geodynamics clearly demonstrate some seismotectonic processes. We present here the model components and the procedures adopted for defining seismic sources to be used in a new generation of probabilistic seismic hazard assessment (PSHA), the first results and maps of which are presented in a companion paper, Peruzza et al. (2017). The sources include, with increasing complexity, seismic zones, individual faults and gridded point sources that are obtained by integrating geological field data with long and short earthquake datasets (the historical macroseismic catalogue, which covers about 3 centuries, and a high-quality instrumental location database for the last decades). The analysis of the frequency-magnitude distribution identifies two main fault systems within the volcanic complex featuring different seismic rates that are controlled essentially by volcano-tectonic processes. We discuss the variability of the mean occurrence times of major earthquakes along the main Etnean faults by using an historical approach and a purely geologic method. We derive a magnitude-size scaling relationship specifically for this volcanic area, which has been implemented into a recently developed software tool - FiSH (Pace et al., 2016) - that we use to calculate the characteristic magnitudes and the related mean recurrence times expected for each fault. Results suggest that for the Mt. Etna area, the traditional assumptions of uniform and Poissonian seismicity can be relaxed; a time-dependent fault-based modeling, joined with a 3-D imaging of volcano-tectonic sources depicted by the recent instrumental seismicity, can therefore be implemented in PSHA maps. They can be relevant for the retrofitting of the existing building stock and for driving risk reduction interventions. These analyses do not account for regional M > 6 seismogenic sources which dominate the hazard over long return times (≥ 500 years).

Simulating recurrent event data with hazard functions defined on a total time scale.

PubMed

Jahn-Eimermacher, Antje; Ingel, Katharina; Ozga, Ann-Kathrin; Preussler, Stella; Binder, Harald

2015-03-08

In medical studies with recurrent event data a total time scale perspective is often needed to adequately reflect disease mechanisms. This means that the hazard process is defined on the time since some starting point, e.g. the beginning of some disease, in contrast to a gap time scale where the hazard process restarts after each event. While techniques such as the Andersen-Gill model have been developed for analyzing data from a total time perspective, techniques for the simulation of such data, e.g. for sample size planning, have not been investigated so far. We have derived a simulation algorithm covering the Andersen-Gill model that can be used for sample size planning in clinical trials as well as the investigation of modeling techniques. Specifically, we allow for fixed and/or random covariates and an arbitrary hazard function defined on a total time scale. Furthermore we take into account that individuals may be temporarily insusceptible to a recurrent incidence of the event. The methods are based on conditional distributions of the inter-event times conditional on the total time of the preceeding event or study start. Closed form solutions are provided for common distributions. The derived methods have been implemented in a readily accessible R script. The proposed techniques are illustrated by planning the sample size for a clinical trial with complex recurrent event data. The required sample size is shown to be affected not only by censoring and intra-patient correlation, but also by the presence of risk-free intervals. This demonstrates the need for a simulation algorithm that particularly allows for complex study designs where no analytical sample size formulas might exist. The derived simulation algorithm is seen to be useful for the simulation of recurrent event data that follow an Andersen-Gill model. Next to the use of a total time scale, it allows for intra-patient correlation and risk-free intervals as are often observed in clinical trial data. Its application therefore allows the simulation of data that closely resemble real settings and thus can improve the use of simulation studies for designing and analysing studies.

Landslide inventories: The essential part of seismic landslide hazard analyses

USGS Publications Warehouse

Harp, E.L.; Keefer, D.K.; Sato, H.P.; Yagi, H.

2011-01-01

A detailed and accurate landslide inventory is an essential part of seismic landslide hazard analysis. An ideal inventory would cover the entire area affected by an earthquake and include all of the landslides that are possible to detect down to sizes of 1-5. m in length. The landslides must also be located accurately and mapped as polygons depicting their true shapes. Such mapped landslide distributions can then be used to perform seismic landslide hazard analysis and other quantitative analyses. Detailed inventory maps of landslide triggered by earthquakes began in the early 1960s with the use of aerial photography. In recent years, advances in technology have resulted in the accessibility of satellite imagery with sufficiently high resolution to identify and map all but the smallest of landslides triggered by a seismic event. With this ability to view any area of the globe, we can acquire imagery for any earthquake that triggers significant numbers of landslides. However, a common problem of incomplete coverage of the full distributions of landslides has emerged along with the advent of high resolution satellite imagery. ?? 2010.

Validation of the alternating conditional estimation algorithm for estimation of flexible extensions of Cox's proportional hazards model with nonlinear constraints on the parameters.

PubMed

Wynant, Willy; Abrahamowicz, Michal

2016-11-01

Standard optimization algorithms for maximizing likelihood may not be applicable to the estimation of those flexible multivariable models that are nonlinear in their parameters. For applications where the model's structure permits separating estimation of mutually exclusive subsets of parameters into distinct steps, we propose the alternating conditional estimation (ACE) algorithm. We validate the algorithm, in simulations, for estimation of two flexible extensions of Cox's proportional hazards model where the standard maximum partial likelihood estimation does not apply, with simultaneous modeling of (1) nonlinear and time-dependent effects of continuous covariates on the hazard, and (2) nonlinear interaction and main effects of the same variable. We also apply the algorithm in real-life analyses to estimate nonlinear and time-dependent effects of prognostic factors for mortality in colon cancer. Analyses of both simulated and real-life data illustrate good statistical properties of the ACE algorithm and its ability to yield new potentially useful insights about the data structure. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Natural radioactivity (226Ra, 232Th and 40K) and assessment of radiological hazards in the Kestanbol granitoid, Turkey.

PubMed

Canbaz, Buket; Cam, N Füsun; Yaprak, Günseli; Candan, Osman

2010-09-01

The surveys of natural gamma-emitting radionuclides in rocks and soils from the Ezine plutonic area were conducted during 2007. Direct dose measurement using a survey meter was carried out simultaneously. The present study, which is part of the survey, analysed the activity concentrations of (238)U, (232)Th and (40)K in granitoid samples from all over the region by HPGe gamma spectrometry. The activity concentrations of (226)Ra ranged from 94 to 637 Bq kg(-1), those of (232)Th ranged from 120 to 601 Bq kg(-1)and those of (40)K ranged from 1074 to 1527 Bq kg(-1) in the analysed rock samples from different parts of the pluton. To evaluate the radiological hazard of the natural radioactivity in the samples, the absorbed dose rate (D), the annual effective dose rate, the radium equivalent activity (Ra(eq)) and the external (H(ex)) hazard index were calculated according to the UNSCEAR 2000 report. The thorium-to-uranium concentration ratios were also estimated.

Hazardous waste characterization among various thermal processes in South Korea: a comparative analysis.

PubMed

Shin, Sun Kyoung; Kim, Woo-Il; Jeon, Tae-Wan; Kang, Young-Yeul; Jeong, Seong-Kyeong; Yeon, Jin-Mo; Somasundaram, Swarnalatha

2013-09-15

Ministry of Environment, Republic of Korea (South Korea) is in progress of converting its current hazardous waste classification system to harmonize it with the international standard and to set-up the regulatory standards for toxic substances present in the hazardous waste. In the present work, the concentrations along with the trend of 13 heavy metals, F(-), CN(-) and 19 PAH present in the hazardous waste generated among various thermal processes (11 processes) in South Korea were analyzed along with their leaching characteristics. In all thermal processes, the median concentrations of Cu (3.58-209,000 mg/kg), Ni (BDL-1560 mg/kg), Pb (7.22-5132.25mg/kg) and Zn (83.02-31419 mg/kg) were comparatively higher than the other heavy metals. Iron & Steel thermal process showed the highest median value of the heavy metals Cd (14.76 mg/kg), Cr (166.15 mg/kg) and Hg (2.38 mg/kg). Low molecular weight PAH (BDL-37.59 mg/kg) was predominant in sludge & filter cake samples present in most of the thermal processes. Comparatively flue gas dust present in most of the thermal processing units resulted in the higher leaching of the heavy metals. Copyright © 2013 Elsevier B.V. All rights reserved.

Impact of the new handling recommendations for hazardous drugs in a hospital pharmacy service.

PubMed

García-Alcántara, Beatriz G; Perelló Alomar, Catalina; Moreno Centeno, Elena; Modamio, Pilar; Mariño, Eduardo L; Delgado Sánchez, Olga

2017-03-01

To describe the actions taken by the Pharmacy Unit in a tertiary hospital in order to adapt to the recommendations established by NIOSH 2014 for handling Hazardous Drugs. Method: A retrospective observational study. A list was prepared including all hazardous drugs according to NIOSH 2014 that were available at the hospital as marketed or foreign drugs, or used in clinical trials, and there was a review of the processes of acquisition, repackaging, preparation, circuits, organizational, dispensing and identification. Results: After the analysis, a report including all needs was prepared and sent to the Hospital Management. Any relevant information about the handling and administration of hazardous drugs was included in the prescription computer program. There were changes in the acquisition process of two drugs, in order to avoid splitting and multi-dose formulations. An alternative or improvement was found for 35 253 of the 75 779 units of hazardous drugs repackaged in one year. The Pharmacy Unit took over the preparation of four non-sterile medications, as well as the preparation of all sterile parenteral medications included in Lists 1 and 2 that were not previously prepared there, as well as one from List 3. Information was also included about the preparation processes of Magistral Formulations that involved hazardous drugs from Lists 2 or 3. The adaptation to the recommendations by NIOSH 2014 has represented a change, but also a significant reduction in the handling process of hazardous drugs by the healthcare staff, therefore reducing the risk of occupational exposure. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

44 CFR 201.4 - Standard State Mitigation Plans.

Code of Federal Regulations, 2010 CFR

2010-10-01

... resources to reducing the effects of natural hazards. (b) Planning process. An effective planning process is... mitigation as well as to development in hazard-prone areas; a discussion of State funding capabilities for... identified. (iv) Identification of current and potential sources of Federal, State, local, or private funding...

44 CFR 201.4 - Standard State Mitigation Plans.

Code of Federal Regulations, 2013 CFR

2013-10-01

... resources to reducing the effects of natural hazards. (b) Planning process. An effective planning process is... mitigation as well as to development in hazard-prone areas; a discussion of State funding capabilities for... identified. (iv) Identification of current and potential sources of Federal, State, local, or private funding...

PHYTOREMEDIATION OF CONTAMINATED SOIL AND GROUND WATER AT HAZARDOUS WASTE SITES (EPA/540/S-01/500)

EPA Science Inventory

The purpose of this issue paper is to provide a concise discussion of the processes associated with the use of phytoremediation as a cleanup or containment technique for remediation of hazardous waste sites. Introductory material on plant processes is provided. The different form...

March 2016 Memo: Planning for Removal and Remedial Activities at Hardrock Mining and Mineral Processing Sites with Fluid Hazards

EPA Pesticide Factsheets

Memo from EPA Assistant Administrator Mathy Stanislaus, regarding planning for removal and remedial activities at hardrock mining and mineral processing sites with fluid hazards, and to share the Agency’s expectations for the work that is done at these sit

40 CFR 63.2855 - How do I determine the quantity of oilseed processed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil... operating month, you must determine the tons as received of each listed oilseed processed for the operating...

A Review of the Recent Scientific Literature on Irrigation Induced and Enhanced Wetlands

DTIC Science & Technology

2014-08-01

Wetlands Located near Salt Lake City, Utah. Bridging the Gap, 1-10. Champagne , P. 2007. Wetlands Natural Processes and Systems for Hazardous Waste...5) Water Quality Champagne , P. 2007. Wetlands Natural Processes and Systems for Hazardous Waste Treatment.189-256. The ability of natural

40 CFR 266.100 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.100 Applicability. (a) The regulations of this subpart apply to hazardous waste burned or processed in a boiler or industrial furnace (as defined in § 260.10 of this chapter) irrespective of the purpose of burning or processing, except as...

40 CFR 266.100 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.100 Applicability. (a) The regulations of this subpart apply to hazardous waste burned or processed in a boiler or industrial furnace (as defined in § 260.10 of this chapter) irrespective of the purpose of burning or processing, except as...

40 CFR 266.100 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.100 Applicability. (a) The regulations of this subpart apply to hazardous waste burned or processed in a boiler or industrial furnace (as defined in § 260.10 of this chapter) irrespective of the purpose of burning or processing, except as...

Processing LiDAR Data to Predict Natural Hazards

NASA Technical Reports Server (NTRS)

Fairweather, Ian; Crabtree, Robert; Hager, Stacey

2008-01-01

ELF-Base and ELF-Hazards (wherein 'ELF' signifies 'Extract LiDAR Features' and 'LiDAR' signifies 'light detection and ranging') are developmental software modules for processing remote-sensing LiDAR data to identify past natural hazards (principally, landslides) and predict future ones. ELF-Base processes raw LiDAR data, including LiDAR intensity data that are often ignored in other software, to create digital terrain models (DTMs) and digital feature models (DFMs) with sub-meter accuracy. ELF-Hazards fuses raw LiDAR data, data from multispectral and hyperspectral optical images, and DTMs and DFMs generated by ELF-Base to generate hazard risk maps. Advanced algorithms in these software modules include line-enhancement and edge-detection algorithms, surface-characterization algorithms, and algorithms that implement innovative data-fusion techniques. The line-extraction and edge-detection algorithms enable users to locate such features as faults and landslide headwall scarps. Also implemented in this software are improved methodologies for identification and mapping of past landslide events by use of (1) accurate, ELF-derived surface characterizations and (2) three LiDAR/optical-data-fusion techniques: post-classification data fusion, maximum-likelihood estimation modeling, and hierarchical within-class discrimination. This software is expected to enable faster, more accurate forecasting of natural hazards than has previously been possible.

Applicability of the Common Safety Method for Risk Evaluation and Assessment (CSM-RA) to the Space Domain

NASA Astrophysics Data System (ADS)

Moreira, Francisco; Silva, Nuno

2016-08-01

Safety systems require accident avoidance. This is covered by application standards, processes, techniques and tools that support the identification, analysis, elimination or reduction to an acceptable level of system risks and hazards. Ideally, a safety system should be free of hazards. However, both industry and academia have been struggling to ensure appropriate risk and hazard analysis, especially in what concerns completeness of the hazards, formalization, and timely analysis in order to influence the specifications and the implementation. Such analysis is also important when considering a change to an existing system. The Common Safety Method for Risk Evaluation and Assessment (CSM- RA) is a mandatory procedure whenever any significant change is proposed to the railway system in a European Member State. This paper provides insights on the fundamentals of CSM-RA based and complemented with Hazard Analysis. When and how to apply them, and the relation and similarities of these processes with industry standards and the system life cycles is highlighted. Finally, the paper shows how CSM-RA can be the basis of a change management process, guiding the identification and management of the hazards helping ensuring the similar safety level as the initial system. This paper will show how the CSM-RA principles can be used in other domains particularly for space system evolution.

A situational analysis of priority disaster hazards in Uganda: findings from a hazard and vulnerability analysis.

PubMed

Mayega, R W; Wafula, M R; Musenero, M; Omale, A; Kiguli, J; Orach, G C; Kabagambe, G; Bazeyo, W

2013-06-01

Most countries in sub-Saharan Africa have not conducted a disaster risk analysis. Hazards and vulnerability analyses provide vital information that can be used for development of risk reduction and disaster response plans. The purpose of this study was to rank disaster hazards for Uganda, as a basis for identifying the priority hazards to guide disaster management planning. The study as conducted in Uganda, as part of a multi-country assessment. A hazard, vulnerability and capacity analysis was conducted in a focus group discussion of 7 experts representing key stakeholder agencies in disaster management in Uganda. A simple ranking method was used to rank the probability of occurance of 11 top hazards, their potential impact and the level vulnerability of people and infrastructure. In-terms of likelihood of occurance and potential impact, the top ranked disaster hazards in Uganda are: 1) Epidemics of infectious diseases, 2) Drought/famine, 3) Conflict and environmental degradation in that order. In terms of vulnerability, the top priority hazards to which people and infrastructure were vulnerable were: 1) Conflicts, 2) Epidemics, 3) Drought/famine and, 4) Environmental degradation in that order. Poverty, gender, lack of information, and lack of resilience measures were some of the factors promoting vulnerability to disasters. As Uganda develops a disaster risk reduction and response plan, it ought to prioritize epidemics of infectious diseases, drought/famine, conflics and environmental degradation as the priority disaster hazards.

DECONTAMINATION OF HAZARDOUS WASTE SUBSTANCES FROM SPILLS AND UNCONTROLLED WASTE SITES BY RADIO FREQUENCY IN SITU HEATING

EPA Science Inventory

The radio frequency (RF) heating process can be used to volumetrically heat and thus decontaminate uncontrolled landfills and hazardous substances from spills. After the landfills are heated, decontamination of the hazardous substances occurs due to thermal decomposition, vaporiz...

Economic and Ethical Consequences of Natural Hazards in Alpine Valleys (EE-Con)

NASA Astrophysics Data System (ADS)

Ortner, Florian; Brantl, Dirk; Meyer, Lukas; Steininger, Karl; Sass, Oliver

2015-04-01

The Alps and their population are particularly vulnerable to geomorphological and hydrological hazards and this problem might be amplified by ongoing climate change. Natural disasters cause severe monetary damage which often leads to the difficult question whether it socially pays to protect settlements at high costs or whether alternatively settlement areas should better be abandoned. By investigations in the Johnsbachtal and the Kleinsölktal (Styria), the interdisciplinary project "Economic and Ethical Consequences of Natural Hazards in Alpine Valleys" (EE-Con), funded by the Austrian Academy of Sciences, seeks to answer the following questions: (1) Are natural hazards and associated damages in fact increasing, and is this due to meteorological triggers, to anthropogenic factors or to internal process dynamics? (2) What is the perception and knowledge of local people, how is risk and risk prevention communicated? (3) What is the respective cost ratio between protection infrastructure, soft measures of adaptation and other options (e.g. reduction of settlement area)? (4) What legitimate claims to compensation do people have, how far does societal responsibility go and where does individual responsibility start if parts of the settlement area had to be abandoned? These questions will be tackled in an interdisciplinary cooperation between geography, economics and normative theory (philosophy). EE-Con will follow broadly the path of risk analysis and risk assessment, focusing on the temporal dimension (past - present - future) with the aim to unravel the history of natural hazards in the areas and to analyse the economic values involved. In the following, natural hazard scenarios for the future (2050 and 2100) will be developed considering the economic consequences. Besides this, the project deals with local knowledge, risk perception and risk communication, which will be investigated via group interviews and stakeholder workshops and be integrated into a human-ecological model. Therefore, local people and stakeholders are going to be involved in a transdisciplinary approach from the start of the project. The geographic and economic information will then be used to find proper weighing mechanisms answering the normative questions mentioned above. The questions of enduring the respective costs and of responsibility for protecting the respective entitlements will be investigated from an ethical, a legal, and an economic viewpoint. The overall outcome of the results should provide an integrative view on the economic and ethical consequences of natural hazards in alpine valleys.

Hazardous Glaciers In Switzerland: A Statistical Analysis of Inventory Data

NASA Astrophysics Data System (ADS)

Raymond, M.; Funk, M.; Wegmann, M.

Because of the recent increase in both occupation and economical activities in high mountain areas, a systematic overview of potential hazard zones of glaciers is needed to avoid the constuction of settlements and infrastructures in endangered areas in fu- ture. Historical informations about glacier disasters show that catastrophic events can happen repeatedly for the same causes and with the same dramatic consequences. Past catastrophic events are not only useful to identify potentially dangerous glaciers, but represent an indication of the kind of glacier hazards to expect for any given glacier. An inventory containing all known events having caused damages in the past has been compiled for Switzerland. Three different types of glacier hazards are distinguished , e.g. ice avalanches, glacier floods and glacier length changes.Hazardous glaciers have been identified in the alpine cantons of Bern, Grison, Uri, Vaud and Valais so far. The inventory data were analysed in terms of periodicity of different types of events as well as of damage occured.

Including foreshocks and aftershocks in time-independent probabilistic seismic hazard analyses

USGS Publications Warehouse

Boyd, Oliver S.

2012-01-01

Time‐independent probabilistic seismic‐hazard analysis treats each source as being temporally and spatially independent; hence foreshocks and aftershocks, which are both spatially and temporally dependent on the mainshock, are removed from earthquake catalogs. Yet, intuitively, these earthquakes should be considered part of the seismic hazard, capable of producing damaging ground motions. In this study, I consider the mainshock and its dependents as a time‐independent cluster, each cluster being temporally and spatially independent from any other. The cluster has a recurrence time of the mainshock; and, by considering the earthquakes in the cluster as a union of events, dependent events have an opportunity to contribute to seismic ground motions and hazard. Based on the methods of the U.S. Geological Survey for a high‐hazard site, the inclusion of dependent events causes ground motions that are exceeded at probability levels of engineering interest to increase by about 10% but could be as high as 20% if variations in aftershock productivity can be accounted for reliably.

Integrating diverse scientific and practitioner knowledge in ecological risk analysis: a case study of biodiversity risk assessment in South Africa.

PubMed

Dana, G V; Kapuscinski, A R; Donaldson, J S

2012-05-15

Ecological risk analysis (ERA) is a structured evaluation of threats to species, natural communities, and ecosystem processes from pollutants and toxicants and more complicated living stressors such as invasive species, genetically modified organisms, and biological control agents. Such analyses are typically conducted by a narrowly-focused group of scientific experts using technical information. We evaluate whether the inclusion of more diverse experts and practitioners in ERA improved the ecological knowledge base about South African biodiversity and the potential impacts of genetically modified (GM) crops. We conducted two participatory ERA workshops in South Africa, analyzing potential impacts of GM maize on biodiversity. The first workshop involved only four biological scientists, who were joined by 18 diverse scientists and practitioners in the second, and we compared the ERA process and results between the two using descriptive statistics and semi-structured interview responses. The addition of diverse experts and practitioners led to a more comprehensive understanding of biological composition of the agro-ecosystem and a more ecologically relevant set of hazards, but impeded hazard prioritization and the generation of precise risk assessment values. Results suggest that diverse participation can improve the scoping or problem formulation of the ERA, by generating an ecologically robust set of information on which to base the subsequent, more technical risk assessment. The participatory ERA process also increased the transparency of the ERA by exposing the logic and rationale for decisions made at each step. Copyright © 2011 Elsevier Ltd. All rights reserved.

Assessment and Control of Spacecraft Charging Risks on the International Space Station

NASA Technical Reports Server (NTRS)

Koontz, Steve; Valentine, Mark; Keeping, Thomas; Edeen, Marybeth; Spetch, William; Dalton, Penni

2004-01-01

The International Space Station (ISS) operates in the F2 region of Earth's ionosphere, orbiting at altitudes ranging from 350 to 450 km at an inclination of 51.6 degrees. The relatively dense, cool F2 ionospheric plasma suppresses surface charging processes much of the time, and the flux of relativistic electrons is low enough to preclude deep dielectric charging processes. The most important spacecraft charging processes in the ISS orbital environment are: 1) ISS electrical power system interactions with the F2 plasma, 2) magnetic induction processes resulting from flight through the geomagnetic field and, 3) charging processes that result from interaction with auroral electrons at high latitude. Recently, the continuing review and evaluation of putative ISS charging hazards required by the ISS Program Office revealed that ISS charging could produce an electrical shock hazard to the ISS crew during extravehicular activity (EVA). ISS charging risks are being evaluated in an ongoing measurement and analysis campaign. The results of ISS charging measurements are combined with a recently developed model of ISS charging (the Plasma Interaction Model) and an exhaustive analysis of historical ionospheric variability data (ISS Ionospheric Specification) to evaluate ISS charging risks using Probabilistic Risk Assessment (PRA) methods. The PRA combines estimates of the frequency of occurrence and severity of the charging hazards with estimates of the reliability of various hazard controls systems, as required by NASA s safety and risk management programs, to enable design and selection of a hazard control approach that minimizes overall programmatic and personnel risk. The PRA provides a quantitative methodology for incorporating the results of the ISS charging measurement and analysis campaigns into the necessary hazard reports, EVA procedures, and ISS flight rules required for operating ISS in a safe and productive manner.

Migraine and risk of stroke: a national population-based twin study.

PubMed

Lantz, Maria; Sieurin, Johanna; Sjölander, Arvid; Waldenlind, Elisabet; Sjöstrand, Christina; Wirdefeldt, Karin

2017-10-01

Numerous studies have indicated an increased risk for stroke in patients with migraine, especially migraine with aura; however, many studies used self-reported migraine and only a few controlled for familial factors. We aimed to investigate migraine as a risk factor for stroke in a Swedish population-based twin cohort, and whether familial factors contribute to an increased risk. The study population included twins without prior cerebrovascular disease who answered a headache questionnaire during 1998 and 2002 for twins born 1935-58 and during 2005-06 for twins born between 1959 and 1985. Migraine with and without aura and probable migraine was defined by an algorithm mapping on to clinical diagnostic criteria according to the International Classification of Headache Disorders. Stroke diagnoses were obtained from the national patient and cause of death registers. Twins were followed longitudinally, by linkage of national registers, from date of interview until date of first stroke, death, or end of study on 31 Dec 2014. In total, 8635 twins had any migraineous headache, whereof 3553 had migraine with aura and 5082 had non-aura migraineous headache (including migraine without aura and probable migraine), and 44 769 twins had no migraine. During a mean follow-up time of 11.9 years we observed 1297 incident cases of stroke. The Cox proportional hazards model with attained age as underlying time scale was used to estimate hazard ratios with 95% confidence intervals for stroke including ischaemic and haemorrhagic subtypes related to migraine with aura, non-aura migraineous headache, and any migraineous headache. Analyses were adjusted for gender and cardiovascular risk factors. Where appropriate; within-pair analyses were performed to control for confounding by familial factors. The age- and gender-adjusted hazard ratio for stroke related to migraine with aura was 1.27 (95% confidence interval 1.00-1.62), P = 0.05, and 1.07 (95% confidence interval 0.91-1.26), P = 0.39 related to any migraineous headache. Multivariable adjusted analyses showed similar results. When stratified by gender and attained age of ≤50 or >50 years, the estimated hazard ratio for stroke was higher in twins younger than 50 years and in females; however, non-significant. In the within-pair analysis, the hazard ratio for stroke related to migraine with aura was attenuated [hazard ratio 1.09 (95% confidence interval 0.81-1.46), P = 0.59]. In conclusion, we observed no increased stroke risk related to migraine overall but there was a modestly increased risk for stroke related to migraine with aura, and within-pair analyses suggested that familial factors might contribute to this association. © The Author (2017). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

49 CFR 107.219 - Processing.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM... with the disposition of previous applications for waiver of preemption determinations. [Amdt. 107-3, 41...

75 FR 14361 - Notification, Documentation, and Recordkeeping Requirements for Inspected Establishments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... establishment's process control plans, that is, its Hazard Analysis and Critical Control Point plans. DATES... control plans, i.e., its Hazard Analysis and Critical Control Point (HACCP) plans; and (3) make the recall... systematic prevention of biological, chemical, and physical hazards. HACCP plans are establishment-developed...

Decision Support for Environmental Management of Industrial Non-Hazardous Secondary Materials: New Analytical Methods Combined with Simulation and Optimization Modeling

EPA Science Inventory

Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requir...

30 CFR 56.15006 - Protective equipment and clothing for hazards and irritants.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and irritants. 56.15006 Section 56.15006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND... and reliable condition and used whenever hazards of process or environment, chemical hazards...

30 CFR 56.15006 - Protective equipment and clothing for hazards and irritants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and irritants. 56.15006 Section 56.15006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND... and reliable condition and used whenever hazards of process or environment, chemical hazards...

30 CFR 56.15006 - Protective equipment and clothing for hazards and irritants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and irritants. 56.15006 Section 56.15006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND... and reliable condition and used whenever hazards of process or environment, chemical hazards...

30 CFR 56.15006 - Protective equipment and clothing for hazards and irritants.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and irritants. 56.15006 Section 56.15006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND... and reliable condition and used whenever hazards of process or environment, chemical hazards...

30 CFR 56.15006 - Protective equipment and clothing for hazards and irritants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and irritants. 56.15006 Section 56.15006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND... and reliable condition and used whenever hazards of process or environment, chemical hazards...

Natural hazard modeling and uncertainty analysis [Chapter 2

Treesearch

Matthew Thompson; Jord J. Warmink

2017-01-01

Modeling can play a critical role in assessing and mitigating risks posed by natural hazards. These modeling efforts generally aim to characterize the occurrence, intensity, and potential consequences of natural hazards. Uncertainties surrounding the modeling process can have important implications for the development, application, evaluation, and interpretation of...

44 CFR 64.3 - Flood Insurance Maps.

Code of Federal Regulations, 2011 CFR

2011-10-01

... flood hazard that results from the decertification of a previously accredited flood protection system that is determined to be in the process of being restored to provide base flood protection V Area of... tidal floods (coastal high hazard area) V1-30, VE Area of special flood hazards, with water surface...

Updated Human Health Risk Analyses for Chlorpyrifos

EPA Pesticide Factsheets

EPA has revised the human health hazard assessment and drinking water exposure assessment for chlorpyrifos that supported our October 2015 proposal to revoke all food residue tolerances for chlorpyrifos.

Super-volcanic investigations

NASA Astrophysics Data System (ADS)

Till, Christy B.; Pritchard, Matthew; Miller, Craig A.; Brugman, Karalee K.; Ryan-Davis, Juliet

2018-04-01

Multi-disciplinary analyses of Earth's most destructive volcanic systems show that continuous monitoring and an understanding of each volcano's quirks, rather than a single unified model, are key to generating accurate hazard assessments.

Fuels planning: science synthesis and integration; forest structure and fire hazard fact sheet 01: forest structure and fire hazard overview

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Many managers and policymakers guided by the National Environmental Policy Act process want to understand the scientific principles on which they can base fuel treatments for reducing the size and severity of wildfires. These Forest Structure and Fire Hazard fact sheets discuss how to estimate fire hazard, how to visualize fuel treatments, and how the role of...

An Analysis of U.S. Army Health Hazard Assessments During the Acquisition of Military Materiel

DTIC Science & Technology

2010-06-03

protective equipment (PPE) (Milz, Conrad, & Soule , 2003). Engineering controls can eliminate hazards through system design, substitution of hazardous...Milz, Conrad, & Soule , 2003). Engineering control measures can serve to 7 minimize hazards where they cannot be eliminated, with preference for...during the materiel acquisitions process, and (c) will evaluate a sample of the database for accuracy by comparing the data entries to original reports

Analysis of the selected optical parameters of filters protecting against hazardous infrared radiation.

PubMed

Gralewicz, Grzegorz; Owczarek, Grzegorz

2016-09-01

The paper analyses the selected optical parameters of protective optic filters used for protection of the eyes against hazardous radiation within the visible (VIS) and near infrared (NIR) spectrum range. The indexes characterizing transmission and reflection of optic radiation incident on the filter are compared. As it follows from the completed analysis, the newly developed interference filters provide more effective blocking of infrared radiation in comparison with the currently used protective filters.

Globe of Natural Hazard - A new assessment tool for risk managers

NASA Astrophysics Data System (ADS)

Siebert, A. C.

2009-04-01

A large number of tropical cyclones and the earthquake in Sichuan made 2008 one of the most devastating years on record. Throughout the world, more than 220,000 people died as a result of natural catastrophes this year. Overall losses totaled some US 200bn (2007: US 82bn). Insured losses in 2008 rose to US 45bn, about 50% higher than in the previous year. Mainly driven by high losses from weather-related natural catastrophes, 2008 was - on the basis of figures adjusted for inflation - even the third most expensive year on record for the insurance industry, exceeded only by the hurricane year of 2005 and by 1995, the year of the Kobe earthquake. Munich Re, a worldwide operating reinsurance company, is a world leader in terms of investigating risks from natural hazards of all kinds. 2008 has again shown the insurance industry how important it is to analyse risks like natural hazards and climate change in all their facets and to manage the insurance business accordingly. An excellent example of the wealth of knowledge Munich Re has developed in natural hazard assessment is the DVD "Globe of Natural Hazards". It combines the geoscientific data and findings Munich Re has accumulated over a period of 35 years. First devised as a wall-map in 1978, the product has established itself as a standard work for the identification, exposure assessment and risk management of natural hazards. Over 80,000 copies of the CD-ROM version of 2000 have been provided to clients - a mark achieved by no other service product in Munich Re's history. Since the beginning of 2009, the fully updated fourth-generation version has been available. The bilingual DVD (German and English) shows natural hazards and climate effects at a glance: the global maps are presented on a 3D globe, underlaid with satellite images. The hazard complexes of hail, tornado and winter storms have been completely revised and flood incorporated as a new hazard. Users can intuitively home in on and enlarge any location on earth, and an extensive location database makes searching easy. The knowledge modules for historical catastrophes, megacities and change processes can be linked with each other and displayed on the maps. Completely new is the integration of the topic of climate change: various depictions of climate effects and projections show in which regions of the world risk situations have to be reckoned with in future. Thanks to its comprehensive information, the globe is an important tool for identifying risk locations worldwide and evaluating them from a geoscientific perspective. Thus, the transparency of insurance portfolios can be increased and legal requirements can be met. Munich Re's multi-discipline Geo Risks team combines a wealth of global experience and contacts. Clients benefit from a first-class natural hazard consultancy service and valuable support for introducing and implementing geographical information technology systems. The team can also provide the knowledge and technology to help clients plan and set up in-house solutions tailored to different classes of business in this innovative field of underwriting. With the new DVD "Globe of Natural Hazards" risk managers, scientists, lecturers and the public have access to Munich Re's natural hazard knowledge. The Globe of Natural Hazards is a natural hazard risk management tool that is easy to use and understand. Earth's exposure to extreme natural hazards will continue to increase. To overcome these challenges the insurance industry will need accurate and competent information.

An evaluation of HACCP implementation status in UK small and medium enterprises in food manufacturing.

PubMed

Fielding, L M; Ellis, L; Beveridge, C; Peters, A C

2005-04-01

To reduce foodborne illnesses, hazard and risk-based quality management systems are essential. Small and medium sized companies (SMEs) tend to have a poor understanding of such systems and limited adoption of the Hazard Analysis Critical Control Point system (HACCP). The requirement for full HACCP implementation by 2006 will place an even greater burden on these businesses. The aim of this project is to assess the current levels of understanding of hazards and risks in SMEs in the manufacturing sector. A questionnaire survey was made of 850 SMEs, including microbusinesses. This determined the industry sector and processes carried out, whether the company operated hazard-based quality management and the knowledge of the technical manager regarding the associated hazards and risks. Follow-up visits to the manufacturing plant observed the processes and the operatives to determine their level of understanding. A benchmarking audit was carried out and each company was rated. The results show that the majority of respondents stated that they operated hazard analysis-based quality management. The ability of the respondents to correctly define a hazard or risk or identify different types of hazard was, however, poor. There was no correlation between business type and audit score. The microbusinesses did, however, perform significantly less well than the larger SMEs.

Quantification of Urban Environment's Role in Slope Stability for Landslide Events.

NASA Astrophysics Data System (ADS)

Bozzolan, E.; Holcombe, E.; Wagener, T.; Pianosi, F.

2017-12-01

The combination of a rapid and unplanned urban development with a likely future climate change could significantly affect landslide occurrences in the humid tropics, where rainfall events of high intensity and duration are the dominant trigger for landslide risk. The attention of current landslide hazard studies is largely focussed on natural slope processes based on combinations of environmental factors, excluding the role of urbanisation on slope stability. This project aims to understand the relative influence of urbanisation features on local slope stability and to translate the findings to a wider region. Individual slopes are firstly analysed with the software CHASM, a physically based model which combines soil hydrology and slope stability assessment. Instead of relying on existing records, generally lacking for landslides, ranges of plausible preparatory (such as slope, cohesion, friction angles), triggering (rainfall) and aggravating factors (deforestation, house density and water network) are defined and possible combinations of these factors are created by sampling from those ranges. The influence of urban features on site hydrology and stability mechanisms are evaluated and then implemented in denser urban contexts, characteristic of unplanned settlements. The results of CHASMS can be transferred to regional maps in order to identify the areas belonging to the triggering combinations of factors previously found. In this way, areas susceptible to landslides can be detected not only in terms of natural factors but also in relation to the degree of urbanisation. Realistic scenarios can be extrapolated from the areas considered and then analysed again with CHASM. This permits to adapt (and improve) the initial variability ranges of the factors, creating a general-specific cycle able to identify the landslide susceptibility regions and outline a hazard map. Once the triggers are understood, possible consequences can be assessed and mitigation strategies can be evaluated. The ability to define local urban rainfall threshold for landslide slope stability helps the decision-making process to prioritize the areas of interest and locally define the main causes of instability.

Potential Alternatives Report for Validation of Alternative Low-Emission Surface PreparationlDepainting Technologies for Structural Steel

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2006-01-01

For this project, particulates and solvents used during the depainting process of steel structures were the identified hazardous material (HazMat) targeted for elimination or reduction. This Potential Alternatives Report (PAR) provides technical analyses of identified alternatives to the current coating removal processes, criteria used to select alternatives for further analysis, and a list of those alternatives recommended for testing. The initial coating removal alternatives list was compiled using literature searches and center participant recommendations. The involved project participants initially considered fifteen (15) alternatives. In late 2004, stakeholders down-selected the list and identified specific processes as potential alternatives to the current depainting methods. The selected alternatives were: 1. Plastic Blast Media 2. Hard Abrasive Media 3. Sponge Blast Media 4. Mechanical Removal with Vacuum Attachment 5. Liquid Nitrogen 6. Laser Coating Removal Available information about these processes was used to analyze the technical merits and the potential environmental, safety, and occupational health (ESOH) impacts of these methods. A preliminary cost benefit analysis will be performed to determine if implementation of alternative technologies is economically justified. NASA AP2

The elaboration likelihood model and communication about food risks.

PubMed

Frewer, L J; Howard, C; Hedderley, D; Shepherd, R

1997-12-01

Factors such as hazard type and source credibility have been identified as important in the establishment of effective strategies for risk communication. The elaboration likelihood model was adapted to investigate the potential impact of hazard type, information source, and persuasive content of information on individual engagement in elaborative, or thoughtful, cognitions about risk messages. One hundred sixty respondents were allocated to one of eight experimental groups, and the effects of source credibility, persuasive content of information and hazard type were systematically varied. The impact of the different factors on beliefs about the information and elaborative processing examined. Low credibility was particularly important in reducing risk perceptions, although persuasive content and hazard type were also influential in determining whether elaborative processing occurred.

Process Waste Assessment Machine and Fabrication Shop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, N.M.

1993-03-01

This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Machine and Fabrication Shop at Sandia National Laboratories, Bonding 913, Room 119. Spent machine coolant is the major hazardous chemical waste generated in this facility. The volume of spent coolant generated is approximately 150 gallons/month. It is sent off-site to a recycler, but a reclaiming system for on-site use is being investigated. The Shop`s line management considers hazardous waste minimization very important. A number of steps have already been taken to minimize wastes, including replacement of a hazardous solvent with biodegradable, non-caustic solution and filtration unit; wastemore » segregation; restriction of beryllium-copper alloy machining; and reduction of lead usage.« less

Flood hazards studies in the Mississippi River basin using remote sensing

NASA Technical Reports Server (NTRS)

Rango, A.; Anderson, A. T.

1974-01-01

The Spring 1973 Mississippi River flood was investigated using remotely sensed data from ERTS-1. Both manual and automatic analyses of the data indicated that ERTS-1 is extremely useful as a regional tool for flood mamagement. Quantitative estimates of area flooded were made in St. Charles County, Missouri and Arkansas. Flood hazard mapping was conducted in three study areas along the Mississippi River using pre-flood ERTS-1 imagery enlarged to 1:250,000 and 1:100,000 scale. Initial results indicate that ERTS-1 digital mapping of flood prone areas can be performed at 1:62,500 which is comparable to some conventional flood hazard map scales.

Safety evaluation methodology for advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.

1981-01-01

Qualitative and quantitative evaluation methods for coal extraction systems were developed. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology establishes the approximate impact of hazards on injury levels. The results are weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

Summary of Public Comments and Responses for Industrial, Commercial, and Institutional Boilers and Process Heaters National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources

EPA Pesticide Factsheets

This page has a 12/2012 document that provides EPA’s responses to public comments on EPA’s Proposed National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters

Hazardous Waste Processing in the Chemical Engineering Curriculum.

ERIC Educational Resources Information Center

Dorland, Dianne; Baria, Dorab N.

1995-01-01

Describes a sequence of two courses included in the chemical engineering program at the University of Minnesota, Duluth that deal with the processing of hazardous wastes. Covers course content and structure, and discusses developments in pollution prevention and waste management that led to the addition of these courses to the curriculum.…

40 CFR Table 1 to Subpart Hhhhh of... - Emission Limits and Work Practice Standards for Process Vessels

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants... to a condenser that reduces the outlet gas temperature to: <10 °C if the process vessel contains HAP...

Violations of Gutenberg-Richter Relation in Anthropogenic Seismicity

NASA Astrophysics Data System (ADS)

Urban, Pawel; Lasocki, Stanislaw; Blascheck, Patrick; do Nascimento, Aderson Farias; Van Giang, Nguyen; Kwiatek, Grzegorz

2016-05-01

Anthropogenic seismicity (AS) is the undesired dynamic rockmass response to technological processes. AS environments are shallow hence their heterogeneities have important impact on AS. Moreover, AS is controlled by complex and changeable technological factors. This complicated origin of AS explains why models used in tectonic seismicity may be not suitable for AS. We study here four cases of AS, testing statistically whether the magnitudes follow the Gutenberg-Richter relation or not. The considered cases include the data from Mponeng gold mine in South Africa, the data observed during stimulation of geothermal well Basel 1 in Switzerland, the data from Acu water reservoir region in Brazil and the data from Song Tranh 2 hydropower plant region in Vietnam. The cases differ in inducing technologies, in the duration of periods in which they were recorded, and in the ranges of magnitudes. In all four cases the observed frequency-magnitude distributions statistically significantly differ from the Gutenberg-Richter relation. Although in all cases the Gutenberg-Richter b value changed in time, this factor turns out to be not responsible for the discovered deviations from the Gutenberg-Richter-born exponential distribution model. Though the deviations from Gutenberg-Richter law are not big, they substantially diminish the accuracy of assessment of seismic hazard parameters. It is demonstrated that the use of non-parametric kernel estimators of magnitude distribution functions improves significantly the accuracy of hazard estimates and, therefore, these estimators are recommended to be used in probabilistic analyses of seismic hazard caused by AS.

Mobilisation kinetics of hazardous elements in marine plastics subject to an avian physiologically-based extraction test.

PubMed

Turner, Andrew

2018-05-01

Samples of plastic collected from two beaches in southwest England (n = 185) have been analysed by XRF spectrometry for elements that are hazardous or restricted in synthetic polymers (namely, As, Ba, Br, Cd, Cr, Hg, Pb, Sb and Se). Overall, one or more restricted element was detected in 151 samples, with 15 cases exhibiting non-compliance with respect to the Restriction of Hazardous Substances (RoHS) Directive. Twelve plastics that were RoHS-non-compliant were subsequently processed into microplastic-sized fragments and subjected to an avian physiologically-based extraction test (PBET) that simulates the chemical conditions in the gizzard-proventriculus of the northern fulmar. Kinetic profiles of metal and metalloid mobilisation in the PBET were fitted using a pseudo-first-order diffusion model with rate constants ranging from ∼0.02 to 0.5 h -1 , while profiles for Br were better fitted with a parabolic diffusion model and rate constants of 7.4-9.5 (μg L -1 ) -1 h -1/2 . Bioaccessibilities, based on maximum or equilibrium concentrations mobilised relative to total (XRF) concentrations, ranged from <1% for Cd and Se in polyethylene and polypropylene to over 10% for Br in a sample of expanded polystyrene and Pb in a sample of PVC. Calculations suggest that ingested plastic could contribute about 6% and 30% of a seabird's exposure to and accumulation of Pb and brominated compounds, respectively. Copyright © 2018 Elsevier Ltd. All rights reserved.

TNT and RDX degradation and extraction from contaminated soil using subcritical water.

PubMed

Islam, Mohammad Nazrul; Shin, Moon-Su; Jo, Young-Tae; Park, Jeong-Hun

2015-01-01

The use of explosives either for industrial or military operations have resulted in the environmental pollution, poses ecological and health hazard. In this work, a subcritical water extraction (SCWE) process at laboratory scale was used at varying water temperature (100-175 °C) and flow rate (0.5-1.5 mL min(-1)), to treat 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) contaminated soil, to reveal information with respect to the explosives removal (based on the analyses of soil residue after extraction), and degradation performance (based on the analyses of water extracts) of this process. Continuous flow subcritical water has been considered on removal of explosives to avoid the repartitioning of non-degraded compounds to the soil upon cooling which usually occurs in the batch system. In the SCWE experiments, near complete degradation of both TNT and RDX was observed at 175 °C based on analysis of water extracts and soil. Test results also indicated that TNT removal of >99% and a complete RDX removal were achieved by this process, when the operating conditions were 1 mL min(-1), and treatment time of 20 min, after the temperature reached 175 °C. HPLC-UV and ion chromatography analysis confirmed that the explosives underwent for degradation. The low concentration of explosives found in the process wastewater indicates that water recycling may be viable, to treat additional soil. Our results have shown in the remediation of explosives contaminated soil, the effectiveness of the continuous flow SCWE process. Copyright © 2014 Elsevier Ltd. All rights reserved.

Three-dimensional displays for natural hazards analysis, using classified Landsat Thematic Mapper digital data and large-scale digital elevation models

NASA Technical Reports Server (NTRS)

Butler, David R.; Walsh, Stephen J.; Brown, Daniel G.

1991-01-01

Methods are described for using Landsat Thematic Mapper digital data and digital elevation models for the display of natural hazard sites in a mountainous region of northwestern Montana, USA. Hazard zones can be easily identified on the three-dimensional images. Proximity of facilities such as highways and building locations to hazard sites can also be easily displayed. A temporal sequence of Landsat TM (or similar) satellite data sets could also be used to display landscape changes associated with dynamic natural hazard processes.

Safe procedure development to manage hazardous drugs in the workplace.

PubMed

Gaspar Carreño, Marisa; Achau Muñoz, Rubén; Torrico Martín, Fátima; Agún Gonzalez, Juan José; Sanchez Santos, Jose Cristobal; Cercos Lletí, Ana Cristina; Ramos Orozco, Pedro

2017-03-01

To develop a safety working procedure for the employees in the Intermutual Hospital de Levante (HIL) in those areas of activity that deal with the handling of hazardous drugs (MP). The procedure was developed in six phases: 1) hazard definition; 2) definition and identification of processes and development of general correct work practices about hazardous drugs' selection and special handling; 3) detection, selection and set of specific recommendations to handle with hazardous drugs during the processes of preparation and administration included in the hospital GFT; 4) categorization of risk during the preparation/administration and development of an identification system; 5) information and training of professionals; 6) implementation of the identification measures and prevention guidelines. Six processes were detected handling HD. During those processes, thirty HD were identified included in the hospital GFT and a safer alternative was found for 6 of them. The HD were classified into 4 risk categories based on those measures to be taken during the preparation and administration of each of them. The development and implementation of specific safety-work processes dealing with medication handling, allows hospital managers to accomplish effectively with their legal obligations about the area of prevention and provides healthcare professional staff with the adequate techniques and safety equipment to avoid possible dangers and risks of some drugs. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

A New Breed of Database System: Volcano Global Risk Identification and Analysis Project (VOGRIPA)

NASA Astrophysics Data System (ADS)

Crosweller, H. S.; Sparks, R. S.; Siebert, L.

2009-12-01

VOGRIPA originated as part of the Global Risk Identification Programme (GRIP) that is being co-ordinated from the Earth Institute of Columbia University under the auspices of the United Nations and World Bank. GRIP is a five-year programme aiming at improving global knowledge about risk from natural hazards and is part of the international response to the catastrophic 2004 Asian tsunami. VOGRIPA is also a formal IAVCEI project. The objectives of VOGRIPA are to create a global database of volcanic activity, hazards and vulnerability information that can be analysed to identify locations at high risk from volcanism, gaps in knowledge about hazards and risk, and will allow scientists and disaster managers at specific locations to analyse risk within a global context of systematic information. It is this added scope of risk and vulnerability as well as hazard which sets VOGRIPA apart from most previous databases. The University of Bristol is the central coordinating centre for the project, which is an international partnership including the Smithsonian Institution, the Geological Survey of Japan, the Earth Observatory of Singapore (Chris Newhall), the British Geological Survey, the University of Buffalo (SUNY) and Munich Re. The partnership is intended to grow and any individuals or institutions who are able to contribute resources to VOGRIPA objectives are welcome to participate. Work has already begun (funded principally by Munich Re) on populating a database of large magnitude explosive eruptions reaching back to the Quaternary, with extreme-value statistics being used to evaluate the magnitude-frequency relationship of such events, and also an assessment of how the quality of records affect the results. The following 4 years of funding from the European Research Council for VOGRIPA will be used to establish further international collaborations in order to develop different aspects of the database, with the data being accessible online once it is sufficiently complete and analyses have been carried out. It is anticipated that such a resource would be of use to the scientific community, civil authorities with responsibility for mitigating and managing volcanic hazards, and the public.

CHANGES SDSS: the development of a Spatial Decision Support System for analysing changing hydro-meteorological risk

NASA Astrophysics Data System (ADS)

van Westen, Cees; Bakker, Wim; Zhang, Kaixi; Jäger, Stefan; Assmann, Andre; Kass, Steve; Andrejchenko, Vera; Olyazadeh, Roya; Berlin, Julian; Cristal, Irina

2014-05-01

Within the framework of the EU FP7 Marie Curie Project CHANGES (www.changes-itn.eu) and the EU FP7 Copernicus project INCREO (http://www.increo-fp7.eu) a spatial decision support system is under development with the aim to analyse the effect of risk reduction planning alternatives on reducing the risk now and in the future, and support decision makers in selecting the best alternatives. The Spatial Decision Support System will be composed of a number of integrated components. The Risk Assessment component allows to carry out spatial risk analysis, with different degrees of complexity, ranging from simple exposure (overlay of hazard and assets maps) to quantitative analysis (using different hazard types, temporal scenarios and vulnerability curves) resulting into risk curves. The platform does not include a component to calculate hazard maps, and existing hazard maps are used as input data for the risk component. The second component of the SDSS is a risk reduction planning component, which forms the core of the platform. This component includes the definition of risk reduction alternatives (related to disaster response planning, risk reduction measures and spatial planning) and links back to the risk assessment module to calculate the new level of risk if the measure is implemented, and a cost-benefit (or cost-effectiveness/ Spatial Multi Criteria Evaluation) component to compare the alternatives and make decision on the optimal one. The third component of the SDSS is a temporal scenario component, which allows to define future scenarios in terms of climate change, land use change and population change, and the time periods for which these scenarios will be made. The component doesn't generate these scenarios but uses input maps for the effect of the scenarios on the hazard and assets maps. The last component is a communication and visualization component, which can compare scenarios and alternatives, not only in the form of maps, but also in other forms (risk curves, tables, graphs). The envisaged users of the platform are organizations involved in planning of risk reduction measures, and that have staff capable of visualizing and analysing spatial data at a municipal scale.

Prescription trends and psychiatric symptoms following first receipt of one of seven common antiepileptic drugs in general practice.

PubMed

Josephson, Colin B; Engbers, Jordan D T; Jette, Nathalie; Patten, Scott B; Sajobi, Tolulope T; Marshall, Deborah; Lowerison, Mark; Wiebe, Samuel

2018-05-09

We sought to examine the risk of psychiatric symptoms associated with a first prescription for specific antiepileptic drugs (AEDs) used in monotherapy in a general cohort of patients with epilepsy. We used The Health Improvement Network database (comprising the years 2000-2012) to identify incident patients with epilepsy. The index date was that on which they met the case definition for epilepsy, and analyses only included patients who remained on monotherapy or received no AED therapy following diagnosis to avoid confounding by polytherapy. Psychiatric symptoms were defined using mental health clinical or treatment (medical or therapeutic) code. We analyzed the AED of interest as a time-varying covariate in multivariate Cox proportional hazard regression models controlling for confounding factors. We identified 9595 patients with incident epilepsy, 7400 of whom (77%) received a first-recorded AED prescription. Prescriptions for newer generation AEDs (lamotrigine and levetiracetam) steadily increased (constituting over 30% of all AED prescriptions by 2012) while valproate use significantly declined in females (~40% in 2002 to just over 20% by 2012). A total of 2190 patients were first exposed to carbamazepine (29.3%) and 222 to lamotrigine (3%), both of which were associated with a lower hazard of any coded psychiatric symptom or disorder in multivariate analyses (hazard ratio [HR]: 0.84, 95% confidence interval [95% CI]: 0.73-0.97; p = 0.02 and HR: 0.83, 95% CI: 0.70-0.99; p = 0.03, respectively, for carbamazepine and lamotrigine). Carbamazepine was also associated with a lower hazard for depression (HR: 0.81; 95% CI: 0.69-0.96; p = 0.013) and anxiety (HR: 0.77; 95% CI: 0.63-0.95; p = 0.013) in secondary analyses. This study provides evidence that carbamazepine and lamotrigine are associated with lower hazards for psychiatric symptoms following a diagnosis of epilepsy. These estimates can be used in clinical settings, and the precision should improve with more contemporary data that include larger proportions of newer generation AEDs. Copyright © 2018 Elsevier Inc. All rights reserved.

Toxicology and occupational hazards of new materials and processes in metal surface treatment, powder metallurgy, technical ceramics, and fiber-reinforced plastics.

PubMed

Midtgård, U; Jelnes, J E

1991-12-01

Many new materials and processes are about to find their way from the research laboratory into industry. The present paper describes some of these processes and provides an overview of possible occupational hazards and a list of chemicals used or produced in the processes. The technological areas that are considered are metal surface treatment (ion implantation, physical and chemical vapor deposition, plasma spraying), powder metallurgy, advanced technical ceramics, and fiber-reinforced plastics.

GIS thematic layers for assessing karst hazard in Murgia region (Italy)

NASA Astrophysics Data System (ADS)

Canora, Filomena; D'Angella, Annachiara; Fidelibus, Dolores; Lella, Angela; Pellicani, Roberta; Spilotro, Giuseppe

2013-04-01

The assessment of karst hazard in a carbonate area may be somewhat complex for the multiplicity of involved factors (geological, hydrological, morphological, anthropogenic, etc.), their history and the slow rate of evolution of the processes. In coastal areas, moreover, the long term sea level variations and the short term oscillations generally influence the generation and evolution of the karst process. Another peculiarity of the karst hazard assessment consists in the difficulty for identifying the location of subsurface forms, which may develop over very large areas without any kind of surface signal. The karst processes and landforms often require specific methods of investigation and mitigation, due to the unique and highly variable characters of karst environments. In addition, the hidden character of the karst processes, often accelerated by human activity, is an issue with significant economic impact, affecting many regions of the world. The assessment of karst hazard in the Murgia plateau (in central-west of Apulia region) is the main goal of this research. For this aim, the typologies of karst phenomena, able to produce hazard in the study area, were individuated and collected in a specific database. The hazard was evaluated on the basis of the probability of occurrence of a phenomenon of instability, active (produced by human activities) or passive (natural evolution of karst process), in relation to the presence, evolution or generation of karst forms on surface or at critical distance from the surface. The critical distance from the surface is defined as the distance at which the local or general destructive evolution of a karst process can produce a variation of the usability of the area or of the value of elements involved in the instability. The thematic layers relative to the factors influencing karst processes and landforms (doline, sinkholes, polje, lame, gravine, caves) were elaborated and managed in a GIS system. The archives of the main karst landforms were reviewed by crossing different cartographic information. Appropriated spatial buffers were defined around the landforms, according to the type of karst phenomenon and to the elevation of the karst forms, as recognized by previous researches. Finally, the karst hazard map was obtained by using an heuristic model that includes all the basic thematic layers.

Lateral spread hazard mapping of the northern Salt Lake Valley, Utah, for a M7.0 scenario earthquake

USGS Publications Warehouse

Olsen, M.J.; Bartlett, S.F.; Solomon, B.J.

2007-01-01

This paper describes the methodology used to develop a lateral spread-displacement hazard map for northern Salt Lake Valley, Utah, using a scenario M7.0 earthquake occurring on the Salt Lake City segment of the Wasatch fault. The mapping effort is supported by a substantial amount of geotechnical, geologic, and topographic data compiled for the Salt Lake Valley, Utah. ArcGIS?? routines created for the mapping project then input this information to perform site-specific lateral spread analyses using methods developed by Bartlett and Youd (1992) and Youd et al. (2002) at individual borehole locations. The distributions of predicted lateral spread displacements from the boreholes located spatially within a geologic unit were subsequently used to map the hazard for that particular unit. The mapped displacement zones consist of low hazard (0-0.1 m), moderate hazard (0.1-0.3 m), high hazard (0.3-1.0 m), and very high hazard (> 1.0 m). As expected, the produced map shows the highest hazard in the alluvial deposits at the center of the valley and in sandy deposits close to the fault. This mapping effort is currently being applied to the southern part of the Salt Lake Valley, Utah, and probabilistic maps are being developed for the entire valley. ?? 2007, Earthquake Engineering Research Institute.

[Design of a HACCP plan for the industrial process of frozen sardines].

PubMed

Rosas, Patricia; Reyes, Genara

2009-09-01

The Hazard Analysis and Critical Control Point (HACCP) is a system to identify, assess and control the hazards related with production, processing, distribution and consumption in order to get safe food. The aim of this study was to design a HACCP plan for implementing in processing line of frozen whole sardine (Sardinella aurita). The methodology was based in the evaluation of the accomplishment of the pre-requisite programs (GMP/SSOP in a previous study), the application of the principles of the HACCP and the sequence of stages settles down by the COVENIN Venezuelan standard No 3802. Time-temperature was recorded in each processing step. Histamine was determined by VERATOX NEOGEN. Results showed that some sardine batches arrived to the plant with high time-temperature records, finding up to 5 ppm of histamine due to the abuse of temperature during transportation. A HACCP plan is proposed with the scope, the selection of the team, the description of the product and the intended use, the flow diagram of the process, hazard analysis and identification of CCP, monitoring system, corrective actions and records. The potential hazards were identified as pathogen growth, presence of histamine and physical objects in the sardines. The control measures of PCC are referred as control of time-temperature during transportation and processing, monitoring of ice supplies and sanitary conditions in the process.

Thrown object hazards in forest operations

Treesearch

Robert Rummer; John Klepac

2011-01-01

Mechanized equipment for forest operations provide better operator protection in this hazardous work environment. However operators of forestry cutting machines are now exposed to new hazards from the high-energy cutting devices used to cut trees and process logs. Anecdotal reports of thrown objects document a risk of injury and fatality. Two new ISO standards have...