Interactive planning workshop. Volume 2. Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-01-01

The Division of Fossil Fuel Utilization has sponsored a series of interactive planning workshops designed to involve private citizens and representatives in industry, the academic community, public interest groups, and state and local governments in the division's planning process. The findings of the Mt. Hood Interactive Planning Workshop are presented in this summary. This conclave was held at Timberline Lodge on October 15-17, 1978, and was hosted by the Mt. Hood Community College of Gresham, Oregon. Participants examined the division's program goals, planning process, and project appraisal methodology.

Updating Older Fume Hoods.

ERIC Educational Resources Information Center

Saunders, G. Thomas

1985-01-01

Provides information on updating older fume hoods. Areas addressed include: (1) adjustment of the hood's back baffle; (2) hood air leakage; (3) light level; (4) hood location in relation to room traffic and room air; and (5) establishing and maintaining hood performance. (JN)

Relationship between pedestrian headform tests and injury and fatality rates in vehicle-to-pedestrian crashes in the United States.

PubMed

Mueller, Becky; Farmer, Charles; Jermakian, Jessica; Zuby, David

2013-11-01

Pedestrian protection evaluations have been developed to encourage vehicle front-end designs that mitigate the consequences of vehicle-to-pedestrian crashes. The European New Car Assessment Program (Euro NCAP) evaluates pedestrian head protection with impacts against vehicle hood, windshield, and A-pillars. The Global Technical Regulation No. 9 (GTR 9), being evaluated for U.S. regulation, limits head protection evaluations to impacts against vehicle hoods. The objective of this study was to compare results from pedestrian head impact testing to the real-world rates of fatal and incapacitating injuries in U.S. pedestrian crashes. Data from police reported pedestrian crashes in 14 states were used to calculate real-world fatal and in- capacitating injury rates for seven 2002-07 small cars. Rates were 2.17-4.04 per 100 pedestrians struck for fatal injuries and 10.45-15.35 for incapacitating injuries. Euro NCAP style pedestrian headform tests were conducted against windshield, A-pillar, and hoods of the study vehicles. When compared with pedestrian injury rates, the vehicles' Euro NCAP scores, ranging 5-10 points, showed strong negative correlations (-0.6) to injury rates, though none were statistically significant. Data from the headform impacts for each of the study vehicles were used to calculate that vehicle's predicted serious injury risk. The predicted risks from both the Euro NCAP and GTR 9 test zones showed high positive correlations with the pedestrian fatal and incapacitating injury rates, though few were statistically significant. Whether vehicle stiffness is evaluated on all components of vehicle front ends (Euro NCAP) or is limited to hoods (GTR 9), softer vehicle components correspond to a lower risk of fatality.

A Methodology for the Geometric Standardization of Vehicle Hoods to Compare Real-World Pedestrian Crashes

PubMed Central

Koetje, Bethany D.; Grabowski, Jurek G.

2008-01-01

This paper describes a standardization method that allows injury researchers to directly compare pedestrian hood contact points across a variety of hood sizes and geometries. To standardize hood contact locations a new coordinate system was created at the geometric center of the hood. Standardizing hood contact locations was done by turning each coordinate location into a ratio of the entire length or width of the hood. The standardized pedestrian contact locations could then be compared for various hood sizes. The standardized hood was divided into a three-by-three grid to aggregate contact points into hood regions. Data was obtained from the National Highway Traffic Safety Administration’s Pedestrian Crash Data Study from 1994 to 1998. To understand injury severity with respect to pedestrian hood contact location, the injuries were narrowed to the single most severe Abreviated Injury Scale injury to the pedestrian and hood location at which that injury was sustained. Of the 97 pedestrian/vehicle cases, pedestrians received 270 injuries from 141 unique hood contact locations. After standardization, 36%, 28%, 36% of all contact points were located on the left, center and right side of the hood respectively. Vertically, 26%, 45%, 28% of contacts occurred at the front, middle, and rear regions of the hood respectively. The middle passenger side of the hood contained the most number of AIS 3+ injuries. By using real-world crash data, engineers can make evidence based decisions to decease the severity of pedestrian injuries. PMID:19026236

Improving flow patterns and spillage characteristics of a box-type commercial kitchen hood.

PubMed

Huang, Rong Fung; Chen, Jia-Kun; Han, Meng-Ji; Priyambodo, Yusuf

2014-01-01

A conventional box-type commercial kitchen hood and its improved version (termed the "IQV commercial kitchen hood") were studied using the laser-assisted smoke flow visualization technique and tracer-gas (sulfur hexafluoride) detection methods. The laser-assisted smoke flow visualization technique qualitatively revealed the flow field of the hood and the areas apt for leakages of hood containment. The tracer-gas concentration detection method measured the quantitative leakage levels of the hood containment. The oil mists that were generated in the conventional box-type commercial kitchen hood leaked significantly into the environment from the areas near the front edges of ceiling and side walls. Around these areas, the boundary-layer separation occurred, inducing highly unsteady and turbulent recirculating flow, and leading to spillages of hood containment due to inappropriate aerodynamic design at the front edges of the ceiling and side walls. The tracer-gas concentration measurements on the conventional box-type commercial kitchen hood showed that the sulfur hexafluoride concentrations detected at the hood face attained very large values on an order of magnitude about 10(3)-10(4) ppb. By combining the backward-offset narrow suction slot, deflection plates, and quarter-circular arcs at the hood entrance, the IQV commercial kitchen hood presented a flow field containing four backward-inclined cyclone flow structures. The oil mists generated by cooking were coherently confined in these upward-rising cyclone flow structures and finally exhausted through the narrow suction slot. The tracer-gas concentration measurements on the IQV commercial kitchen hood showed that the order of magnitude of the sulfur hexafluoride concentrations detected at the hood face is negligibly small--only about 10(0) ppb across the whole hood face.

Energy efficient laboratory fume hood

DOEpatents

Feustel, Helmut E.

2000-01-01

The present invention provides a low energy consumption fume hood that provides an adequate level of safety while reducing the amount of air exhausted from the hood. A low-flow fume hood in accordance with the present invention works on the principal of providing an air supply, preferably with low turbulence intensity, in the face of the hood. The air flow supplied displaces the volume currently present in the hood's face without significant mixing between the two volumes and with minimum injection of air from either side of the flow. This air flow provides a protective layer of clean air between the contaminated low-flow fume hood work chamber and the laboratory room. Because this protective layer of air will be free of contaminants, even temporary mixing between the air in the face of the fume hood and room air, which may result from short term pressure fluctuations or turbulence in the laboratory, will keep contaminants contained within the hood. Protection of the face of the hood by an air flow with low turbulence intensity in accordance with a preferred embodiment of the present invention largely reduces the need to exhaust large amounts of air from the hood. It has been shown that exhaust air flow reductions of up to 75% are possible without a decrease in the hood's containment performance.

Shape memory alloy resetable spring lift for pedestrian protection

NASA Astrophysics Data System (ADS)

Barnes, Brian M.; Brei, Diann E.; Luntz, Jonathan E.; Strom, Kenneth; Browne, Alan L.; Johnson, Nancy

2008-03-01

Pedestrian protection has become an increasingly important aspect of automotive safety with new regulations taking effect around the world. Because it is increasingly difficult to meet these new regulations with traditional passive approaches, active lifts are being explored that increase the "crush zone" between the hood and rigid under-hood components as a means of mitigating the consequences of an impact with a non-occupant. Active lifts, however, are technically challenging because of the simultaneously high forces, stroke and quick timing resulting in most of the current devices being single use. This paper introduces the SMArt (Shape Memory Alloy ReseTable) Spring Lift, an automatically resetable and fully reusable device, which couples conventional standard compression springs to store the energy required for a hood lift, with Shape Memory Alloys actuators to achieve both an ultra high speed release of the spring and automatic reset of the system for multiple uses. Each of the four SMArt Device subsystems, lift, release, lower and reset/dissipate, are individually described. Two identical complete prototypes were fabricated and mounted at the rear corners of the hood, incorporated within a full-scale vehicle testbed at the SMARTT (Smart Material Advanced Research and Technology Transfer) lab at University of Michigan. Full operational cycle testing of a stationary vehicle in a laboratory setting confirms the ultrafast latch release, controlled lift profile, gravity lower to reposition the hood, and spring recompression via the ratchet engine successfully rearming the device for repeat cycles. While this is only a laboratory demonstration and extensive testing and development would be required for transition to a fielded product, this study does indicate that the SMArt Lift has promise as an alternative approach to pedestrian protection.

Flow Characteristics and Robustness of an Inclined Quad-vortex Range Hood

PubMed Central

CHEN, Jia-Kun; HUANG, Rong Fung

2014-01-01

A novel design of range hood, which was termed the inclined quad-vortex (IQV) range hood, was examined for its flow and containment leakage characteristics under the influence of a plate sweeping across the hood face. A flow visualization technique was used to unveil the flow behavior. Three characteristic flow modes were observed: convex, straight, and concave modes. A tracer gas detection method using sulfur hexafluoride (SF6) was employed to measure the containment leakage levels. The results were compared with the test data reported previously in the literature for a conventional range hood and an inclined air curtain (IAC) range hood. The leakage SF6 concentration of the IQV range hood under the influence of the plate sweeping was 0.039 ppm at a suction flow rate of 9.4 m3/min. The leakage concentration of the conventional range hood was 0.768 ppm at a suction flow rate of 15.0 m3/min. For the IAC range hood, the leakage concentration was 0.326 ppm at a suction flow rate of 10.9 m3/min. The IQV range hood presented a significantly lower leakage level at a smaller suction flow rate than the conventional and IAC range hoods due to its aerodynamic design for flow behavior. PMID:24583513

Age-specific survival of male golden-cheeked warblers on the Fort Hood Military Reservation, Texas

USGS Publications Warehouse

Duarte, Adam; Hines, James E.; Nichols, James D.; Hatfield, Jeffrey S.; Weckerly, Floyd W.

2014-01-01

Population models are essential components of large-scale conservation and management plans for the federally endangered Golden-cheeked Warbler (Setophaga chrysoparia; hereafter GCWA). However, existing models are based on vital rate estimates calculated using relatively small data sets that are now more than a decade old. We estimated more current, precise adult and juvenile apparent survival (Φ) probabilities and their associated variances for male GCWAs. In addition to providing estimates for use in population modeling, we tested hypotheses about spatial and temporal variation in Φ. We assessed whether a linear trend in Φ or a change in the overall mean Φ corresponded to an observed increase in GCWA abundance during 1992-2000 and if Φ varied among study plots. To accomplish these objectives, we analyzed long-term GCWA capture-resight data from 1992 through 2011, collected across seven study plots on the Fort Hood Military Reservation using a Cormack-Jolly-Seber model structure within program MARK. We also estimated Φ process and sampling variances using a variance-components approach. Our results did not provide evidence of site-specific variation in adult Φ on the installation. Because of a lack of data, we could not assess whether juvenile Φ varied spatially. We did not detect a strong temporal association between GCWA abundance and Φ. Mean estimates of Φ for adult and juvenile male GCWAs for all years analyzed were 0.47 with a process variance of 0.0120 and a sampling variance of 0.0113 and 0.28 with a process variance of 0.0076 and a sampling variance of 0.0149, respectively. Although juvenile Φ did not differ greatly from previous estimates, our adult Φ estimate suggests previous GCWA population models were overly optimistic with respect to adult survival. These updated Φ probabilities and their associated variances will be incorporated into new population models to assist with GCWA conservation decision making.

Ethanol intake and sup 3 H-serotonin uptake I: A study in Fawn-Hooded rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daoust, M.; Compagnon, P.; Legrand, E.

1991-01-01

Ethanol intake and synaptosomal {sup 3}H-serotonin uptake were studied in male Fawn-Hooded and Sprague-Dawley rats. Fawn-Hooded rats consumed more alcohol and more water than Sprague-Dawley rats. Plasma alcohol levels of Sprague-Dawley rats were not detectable but were about 5 mg/dl in Fawn-Hooded rats. Ethanol intake increased the Vmax of serotonin uptake in Fawn-Hooded rats in hippocampus and cortex, but not in thalamus. In Fawn-Hooded rats, serotonin uptake (Vmax) was higher than in Sprague-Dawley rats cortex. Ethanol intake reduced the Vmax of serotonin uptake in Fawn-Hooded rats in hippocampus and cortex. In cortex, the carrier affinity for serotonin was increased inmore » alcoholized Fawn-Hooded rats. These results indicate that synaptosomal {sup 3}H-serotonin uptake is affected by ethanol intake. In Fawn-Hooded rats, high ethanol consumption is associated with high serotonin uptake. In rats presenting high serotonin uptake, alcoholization reduces {sup 3}H-serotonin internalization in synaptosomes, indicating a specific sensitivity to alcohol intake of serotonin uptake system.« less

Hood River and Pelton Ladder Evaluation Studies, Annual Report 2000-2001.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Erik

The Bonneville Power Administration (BPA) funded the development of two master plans which outline the rationale, and general approach, for implementing a defined group of projects that are an integral part of a comprehensive watershed goal to 'Protect, enhance and restore wild and natural populations of anadromous and resident fish within the Hood River Subbasin'. The Hood River Production Master Plan and the Pelton Ladder Master Plan were completed in 1991 and subsequently approved by the Northwest Power Planning Council in 1992. Action items identified in the two master plans, as well as in a later document entitled 'Hood River/Peltonmore » Ladder Master Agreement' (ODFW and CTWSRO Undated), are designed to achieve two biological fish objectives: (1) to increase production of wild summer and winter steelhead (Oncorhynchus mykiss) to levels commensurate with the subbasins current carrying capacity and (2) re-establishing a self-sustaining population of spring chinook salmon (Oncorhynchus tshawytscha). Numerical fish objectives for subbasin escapement, spawner escapement, and subbasin harvest are defined for each of these species in Coccoli (2000). Several projects are presently funded by the BPA to achieve the Hood River subbasin's numerical fish objectives for summer and winter steelhead and spring chinook salmon. They include BPA project numbers 1998-021-00 (Hood River Fish Habitat), 1998-053-03 (Hood River Production Program - CTWSRO: M&E), 1998-053-07 (Parkdale Fish Facility), 1998-053-08 (Powerdale/Oak Springs O&M), and 1998-053-12 (Hood River Steelhead Genetics Study). Collectively, they are implemented under the umbrella of what has come to be defined as the Hood River Production Program (HRPP). The HRPP is jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and The Confederated Tribes of the Warm Springs Reservation of Oregon (CTWSRO). Strategies for achieving the HRPP's biological fish objectives for the Hood River subbasin were initially devised based on various assumptions about (1) subbasin carrying capacity, (2) survival rates for selected life history stages, and (3) historic and current escapements of wild, natural, and hatchery stocks of anadromous salmonids to the Hood River subbasin. The Oregon Department of Fish and Wildlife began funding a monitoring and evaluation (M&E) project in December 1991 to collect the quantitative biological information needed to (1) more accurately assess the validity of these assumptions and (2) evaluate the proposed hatchery supplementation component of the HRPP. Bonneville Power Administration assumed funding of the M&E project in August 1992. The M&E project was initially confined to sampling anadromous salmonids escaping to an adult trapping facility operated at Powerdale Dam; which is located at River Mile (RM) 4.5 on the mainstem of the Hood River. Stock specific life history and biological data was collected to (1) monitor subbasin spawner escapements and (2) collect pre-implementation data critical to evaluating the newly proposed HRPP's potential biological impact on indigenous populations of resident fish. The scope of the M&E project was expanded in 1994 to collect the data needed to quantify (1) subbasin smolt production and carrying capacity, (2) smolt to adult survival rates, and (3) the spatial distribution of indigenous populations of summer and winter steelhead, spring and fall chinook salmon, and coho salmon. A creel was incorporated into the M&E project in December 1996 to evaluate the HRPP with respect to its defined subbasin and spawner escapement objectives for Hood River stocks of wild and hatchery summer and winter steelhead and for natural and Deschutes stock hatchery spring chinook salmon. In 1996, the M&E project also began monitoring streamflow at various locations in the Hood River subbasin. Streamflow data will be used to correlate subbasin smolt production with summer streamflows. Data collected from 1991-1999 is reported in the following annual progress reports: Olsen et al. (1994), Olsen et al. (1995), Olsen and French (1996), Olsen et al. (1996), Olsen and French (1999), and Olsen and French (2000). The annual progress reports document information collected on (1) rearing densities of indigenous fish, (2) subbasin steelhead smolt production, (3) post-release survival of acclimated and direct released hatchery summer and winter steelhead smolts, (4) smolt to adult anadromous salmonid survival rates, (5) jack and adult anadromous salmonid escapements and harvest, (6) spatial distribution of adult anadromous salmonid holding in the Hood River subbasin, (7) selected life history patterns and morphological and meristic characteristics of wild, natural, and hatchery resident and anadromous salmonids, and (8) summer streamflows.« less

Is Robin Hood Alive in Your Classroom?

ERIC Educational Resources Information Center

Royer, Sharon E.

2002-01-01

Considers whether the tales of Robin Hood should be presented as fact or fiction. Discusses the appropriateness of the tales for use in literature programs. Presents arguments for Robin Hood as fact and arguments for Robin Hood as fiction. Considers different versions of the tale. (SG)

Experience Gained from Designing Exhaust Hoods of Large Steam Turbines Using Computational Fluid Dynamics Techniques

NASA Astrophysics Data System (ADS)

Galaev, S. A.; Ris, V. V.; Smirnov, E. M.; Babiev, A. N.

2018-06-01

Experience gained from designing exhaust hoods for modernized versions of K-175/180-12.8 and K-330-23.5-1 steam turbines is presented. The hood flow path is optimized based on the results of analyzing equilibrium wet steam 3D flow fields calculated using up-to-date computation fluid dynamics techniques. The mathematical model constructed on the basis of Reynolds-averaged Navier-Stokes equations is validated by comparing the calculated kinetic energy loss with the published data on full-scale experiments for the hood used in the K-160-130 turbine produced by the Kharkiv Turbine-Generator Works. Test calculations were carried out for four turbine operation modes. The obtained results from validating the model with the K-160-130 turbine hood taken as an example were found to be equally positive with the results of the previously performed calculations of flow pattern in the K-300-240 turbine hood. It is shown that the calculated coefficients of total losses in the K-160-130 turbine hood differ from the full-scale test data by no more than 5%. As a result of optimizing the K-175/180-12.8 turbine hood flow path, the total loss coefficient has been decreased from 1.50 for the initial design to 1.05 for the best of the modification versions. The optimized hood is almost completely free from supersonic flow areas, and the flow through it has become essentially more uniform both inside the hood and at its outlet. In the modified version of the K-330-23.5-1 turbine hood, the total loss coefficient has been decreased by more than a factor of 2: from 2.3 in the hood initial design to a value of 1.1 calculated for the hood final design version and sizes adopted for developing the detailed design. Cardinally better performance of both the hoods with respect to their initial designs was achieved as a result of multicase calculations, during which the flow path geometrical characteristics were sequentially varied, including options involving its maximally possible expansion and removal of the guiding plates producing an adverse effect.

Performance assessment of U.S. residential cooking exhaust hoods.

PubMed

Delp, William W; Singer, Brett C

2012-06-05

This study assessed the performance of seven new residential cooking exhaust hoods representing common U.S. designs. Laboratory tests were conducted to determine fan curves relating airflow to duct static pressure, sound levels, and exhaust gas capture efficiency for front and back cooktop burners and the oven. Airflow rate sensitivity to duct flow resistance was higher for axial fan devices than for centrifugal fan devices. Pollutant capture efficiency (CE) ranged from <15% to >98%, varying across hoods and with airflow and burner position for each hood. CE was higher for back burners relative to front burners, presumably because most hoods covered only part of the front burners. Open hoods had higher CE than those with grease screen and metal-covered bottoms. The device with the highest CE--exceeding 80% for oven and front burners--had a large, open hood that covered most of the front burners. The airflow rate for this hood surpassed the industry-recommended level of 118 L·s(-1) (250 cfm) and produced sound levels too high for normal conversation. For hoods meeting the sound and fan efficacy criteria for Energy Star, CE was <30% for front and oven burners.

Plutonium immobilization can loading FY99 component test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriikku, E.

2000-06-01

This report summarizes FY99 Can Loading work completed for the Plutonium Immobilization Project and it includes details about the Helium hood, cold pour cans, Can Loading robot, vision system, magnetically coupled ray cart and lifts, system integration, Can Loading glovebox layout, and an FY99 cost table.

Utilisation of polyurethane composit with 50% composition of roystonea regia fiber as noise reduction panel on car hood

NASA Astrophysics Data System (ADS)

Ikhwansyah; Mulia; Gunawan, S.; Lubis, R. D. W.

2018-02-01

The objective is to get the characteristics of noise reduction, noise reduction level, variety of measurement spaces, and knowing the process in making acoustic material of natural fiber becomes noise reduction on a car hood. The process of making noise reduction material used casting method and pressed by using molded press. The composition of noise reduction material consist of 50% roystonea regia by 32 mesh and 50% combined by gypsum and polyurethane. The result shows that the average result of noise reduction at X1- side is 5,7% and X2- side is 3,9%, X1+ side is 0,9% and X2+ side is 6,2%, Z1- side is 8,9% and Z2- side is 10,1%, Z1+ side is 9,7% and Z2+ side is 10,01%. The main conclusion of the study shows that a noise reduction which made of roystonea regia with 32 mesh mixed by matrix of polyurethane and gypsum is appropriate for noise reduction on car hood.

Hood River Production Master Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Toole, Patty

1991-07-01

The Northwest Power Planning Council's 1987 Columbia River Fish and Wildlife Program authorizes the development of artificial production facilities to raise chinook salmon and steelhead for enhancement in the Hood, Umatilla, Walla Walla, Grande Ronde and Imnaha rivers and elsewhere. On February 26, 1991 the Council agreed to disaggregate Hood River from the Northeast Oregon Hatchery Project, and instead, link the Hood River Master Plan (now the Hood River Production Plan) to the Pelton Ladder Project (Pelton Ladder Master Plan 1991).

The Topology Optimization Design Research for Aluminum Inner Panel of Automobile Engine Hood

NASA Astrophysics Data System (ADS)

Li, Minhao; Hu, Dongqing; Liu, Xiangzheng; Yuan, Huanquan

2017-11-01

This article discusses the topology optimization methods for automobile engine hood design. The aluminum inner panel of engine hood and mucilage glue regions are set as design areas, and the static performances of engine hood included modal frequency, lateral stiffness, torsional stiffness and indentation stiffness are set as the optimization objectives. The topology optimization results about different objective functions are contrasted for analysis. And based on the reasonable topology optimization result, a suited automobile engine hood designs are raised to further study. Finally, an automobile engine hood that good at all of static performances is designed, and a favorable topology optimization method is put forward for discussion.

Protective supplied breathing air garment

DOEpatents

Childers, Edward L.; von Hortenau, Erik F.

1984-07-10

A breathing air garment for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap.

Protective supplied-breathing-air garment

DOEpatents

Childers, E.L.; von Hortenau, E.F.

1982-05-28

A breathing-air garment for isolating a wearer from hostile environments containing toxins or irritants is disclosed. The garment includes a suit and a separate head-protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air-delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air-delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit sealed with an adhesive sealing flap.

40 CFR 61.172 - Standard for new and existing sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... operation. (ii) The back of the hood enclosure shall be fully enclosed and sealed against the primary hood...-slotted plenum shall be connected to a fan. When activated, the fan shall push air through the horizontal... hood enclosure, side- and back-wall hood seals, and the horizontal slot. (ii) Replace or repair any...

Verification of International Space Station Component Leak Rates by Helium Accumulation Method

NASA Technical Reports Server (NTRS)

Underwood, Steve D.; Smith, Sherry L.

2003-01-01

Discovery of leakage on several International Space Station U.S. Laboratory Module ammonia system quick disconnects (QDs) led to the need for a process to quantify total leakage without removing the QDs from the system. An innovative solution was proposed allowing quantitative leak rate measurement at ambient external pressure without QD removal. The method utilizes a helium mass spectrometer configured in the detector probe mode to determine helium leak rates inside a containment hood installed on the test component. The method was validated through extensive developmental testing. Test results showed the method was viable, accurate and repeatable for a wide range of leak rates. The accumulation method has been accepted by NASA and is currently being used by Boeing Huntsville, Boeing Kennedy Space Center and Boeing Johnson Space Center to test welds and valves and will be used by Alenia to test the Cupola. The method has been used in place of more expensive vacuum chamber testing which requires removing the test component from the system.

Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

NASA Technical Reports Server (NTRS)

Obrien, W. J.

1976-01-01

Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

Estimates of Nutrient Loading by Ground-Water Discharge into the Lynch Cove Area of Hood Canal, Washington

USGS Publications Warehouse

Simonds, F. William; Swarzenski, Peter W.; Rosenberry, Donald O.; Reich, Christopher D.; Paulson, Anthony J.

2008-01-01

Low dissolved oxygen concentrations in the waters of Hood Canal threaten marine life in late summer and early autumn. Oxygen depletion in the deep layers and landward reaches of the canal is caused by decomposition of excess phytoplankton biomass, which feeds on nutrients (primarily nitrogen compounds) that enter the canal from various sources, along with stratification of the water column that prevents mixing and replenishment of oxygen. Although seawater entering the canal is the largest source of nitrogen, ground-water discharge to the canal also contributes significant quantities, particularly during summer months when phytoplankton growth is most sensitive to nutrient availability. Quantifying ground-water derived nutrient loads entering an ecologically sensitive system such as Hood Canal is a critical component of constraining the total nutrient budget and ultimately implementing effective management strategies to reduce impacts of eutrophication. The amount of nutrients entering Hood Canal from ground water was estimated using traditional and indirect measurements of ground-water discharge, and analysis of nutrient concentrations. Ground-water discharge to Hood Canal is variable in space and time because of local geology, variable hydraulic gradients in the ground-water system adjacent to the shoreline, and a large tidal range of 3 to 5 meters. Intensive studies of ground-water seepage and hydraulic-head gradients in the shallow, nearshore areas were used to quantify the freshwater component of submarine ground-water discharge (SGD), whereas indirect methods using radon and radium geochemical tracers helped quantify total SGD and recirculated seawater. In areas with confirmed ground-water discharge, shore-perpendicular electrical resistivity profiles, continuous electromagnetic seepage-meter measurements, and continuous radon measurements were used to visualize temporal variations in ground-water discharge over several tidal cycles. The results of these field investigations show that ground-water discharge into the Lynch Cove area of Hood Canal is highly dynamic and strongly affected by the large tidal range. In areas with a steep shoreline and steep hydraulic gradient, ground-water discharge is spatially concentrated in or near the intertidal zone, with increased discharge during low tide. Topographically flat areas with weak hydraulic gradients had more spatial variability, including larger areas of seawater recirculation and more widely dispersed discharge. Measured total-dissolved-nitrogen concentrations in ground water ranged from below detection limits to 2.29 milligrams per liter and the total load entering Lynch Cove was estimated to be approximately 98 ? 10.3 metric tons per year (MT/yr). This estimate is based on net freshwater seepage rates from Lee-type seepage meter measurements and can be compared to estimates derived from geochemical tracer mass balance estimates (radon and radium) of 231 to 749 MT/yr, and previous water-mass-balance estimates (14 to 47 MT/ yr). Uncertainty in these loading estimates is introduced by complex biogeochemical cycles of relevant nutrient species, the representativeness of measurement sites, and by energetic dynamics at the coastal aquifer-seawater interface caused by tidal forcing.

42 CFR 84.202 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Air velocity and noise levels; hoods and helmets... PROTECTIVE DEVICES Chemical Cartridge Respirators § 84.202 Air velocity and noise levels; hoods and helmets; minimum requirements. Noise levels generated by the respirator will be measured inside the hood or helmet...

42 CFR 84.140 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Air velocity and noise levels; hoods and helmets... PROTECTIVE DEVICES Supplied-Air Respirators § 84.140 Air velocity and noise levels; hoods and helmets; minimum requirements. Noise levels generated by the respirator will be measured inside the hood or helmet...

42 CFR 84.202 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Air velocity and noise levels; hoods and helmets... PROTECTIVE DEVICES Chemical Cartridge Respirators § 84.202 Air velocity and noise levels; hoods and helmets; minimum requirements. Noise levels generated by the respirator will be measured inside the hood or helmet...

42 CFR 84.140 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Air velocity and noise levels; hoods and helmets... PROTECTIVE DEVICES Supplied-Air Respirators § 84.140 Air velocity and noise levels; hoods and helmets; minimum requirements. Noise levels generated by the respirator will be measured inside the hood or helmet...

Technology demonstration for reducing mercury emissions from small-scale gold refining facilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habegger, L. J.; Fernandez, L. E.; Engle, M.

2008-06-30

Gold that is brought from artisanal and small-scale gold mining areas to gold shops for processing and sale typically contains 5-40% mercury. The uncontrolled removal of the residual mercury in gold shops by using high-temperature evaporation can be a significant source of mercury emissions in urban areas where the shops are located. Emissions from gold shop hoods during a burn can exceed 1,000 mg/m{sup 3}. Because the saturation concentration of mercury vapor at operating temperatures at the hood exhaust is less than 100 mg/m{sup 3}, the dominant component of the exhaust is in the form of aerosol or liquid particles.more » The U.S. Environmental Protection Agency (EPA), with technical support from Argonne National Laboratory (Argonne), has completed a project to design and test a technology to remove the dominant aerosol component in the emissions from gold shops. The objective was to demonstrate a technology that could be manufactured at low cost and by using locally available materials and manufacturing capabilities. Six prototypes designed by Argonne were locally manufactured, installed, and tested in gold shops in Itaituba and Creporizao, Brazil. The initial prototype design incorporated a pebble bed as the media for collecting the mercury aerosols, and a mercury collection efficiency of over 90% was demonstrated. Though achieving high efficiencies, the initial prototype was determined to have practical disadvantages such as excessive weight, a somewhat complex construction, and high costs (>US$1,000). To further simplify the construction, operation, and associated costs, a second prototype design was developed in which the pebble bed was replaced with slotted steel baffle plates. The system was designed to have flexibility for installation in various hood configurations. The second prototype with the baffle plate design was installed and tested in several different hood/exhaust systems to determine the optimal installation configuration. The significance of coagulation and collection of the mercury aerosols in exhaust ducts, which is dependent on the hood and collector configuration, was also evaluated. Prototype demonstration tests verified the theoretical basis for mercury aerosol capture that can be used to optimize the baffle plate design, flow rates, and hood exhaust ducts and plenum to achieve 80% or higher removal efficiencies. Results indicated that installation configuration significantly influences a system's capture efficiency. Configurations that retained existing inlet ducts resulted in system efficiencies of more than 80%, whereas installation configurations without inlet ducts significantly reduced capture efficiency. As an alternative to increasing the volume of inlet ducts, the number of baffle plates in the system baffle assembly could be doubled to increase efficiency. Recommended installation and operation procedures were developed on the basis of these results. A water-based mercury capture system developed in Indonesia for installation in smaller shops was also tested and shown to be effective for certain applications. The cost of construction and installation of the baffle plate prototype was approximately US$400. These costs were reported as acceptable by local gold shop owners and government regulators, and were significantly lower than the cost of an alternate charcoal/copper mesh mercury filter available in the region, which costs about US$10,000. A sampling procedure that consists of a particle filter combined with a vapor analyzer was demonstrated as an effective procedure for analyzing both the aerosol and vapor components of the mercury concentrations. Two key findings for enhancing higher mercury collection were identified. First, the aerosol/vapor mercury emissions must be given sufficient time for the mercury particles to coagulate to a size that can be readily captured by the baffle plates. An interval of at least 6 seconds of transit time between the point of evaporation and contact with the slotted baffle plates is recommended. Some particles will also deposit in the exhaust ducts between the point of evaporation and the baffle plates. Second, the slots in the baffle plates create jets that force the mercury particles to impinge and adhere on downstream surfaces. The baffle plates should closely follow the designs developed for this system to be most effective.« less

Flow characteristics of an inclined air-curtain range hood in a draft

PubMed Central

CHEN, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m3/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s. PMID:25810445

Flow characteristics of an inclined air-curtain range hood in a draft.

PubMed

Chen, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m(3)/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s.

Respiratory protection during simulated emergency pediatric life support: a randomized, controlled, crossover study.

PubMed

Schumacher, Jan; Gray, Stuart A; Michel, Sophie; Alcock, Roger; Brinker, Andrea

2013-02-01

Emergency pediatric life support (EPLS) of children infected with transmissible respiratory diseases requires adequate respiratory protection for medical first responders. Conventional air-purifying respirators (APR) and modern loose-fitting powered air-purifying respirator-hoods (PAPR-hood) may have a different impact during pediatric resuscitation and therefore require evaluation. This study investigated the influence of APRs and PAPR-hoods during simulated pediatric cardiopulmonary resuscitation. Study design was a randomized, controlled, crossover study. Sixteen paramedics carried out a standardized EPLS scenario inside an ambulance, either unprotected (control) or wearing a conventional APR or a PAPR-hood. Treatment times and wearer comfort were determined and compared. All paramedics completed the treatment objectives of the study arms without adverse events. Study subjects reported that communication, dexterity and mobility were significantly better in the APR group, whereas the heat-build-up was significantly less in the PAPR-hood group. Treatment times compared to the control group did not significantly differ for the APR group but did with the PAPR-hood group (261±12 seconds for the controls, 275±9 seconds for the conventional APR and 286±13 seconds for the PAPR-hood group, P < .05. APRs showed a trend to better treatment times compared to PAPR-hoods during simulated pediatric cardiopulmonary resuscitation. Study participants rated mobility, ease of communication and dexterity with the tight-fitting APR system significantly better compared to the loose-fitting PAPR-hood.

Neoprene wet-suit hood affects low-frequency underwater hearing thresholds.

PubMed

Fothergill, David M; Sims, John R; Curley, Michael D

2004-05-01

Psychophysical measures of wet-suit hood sound attenuation are needed to provide the diving community with guidance on protection from underwater sound. Underwater hearing thresholds were obtained from 15 male and 5 female recreational divers with and without a 3-mm thick wet-suit hood. Dives were conducted at a depth of 1 m in a large quiet anechoic pool. Thresholds were determined using a two-interval forced-choice procedure with a 0.71 probability of positive response at convergence. A 1-s pure tone was presented with a 20-ms rise and fall time at 100, 200, 250, 300, 400, and 500 Hz. Without a wet-suit hood, mean thresholds decreased from 99 dB re 1 microPa at 100 Hz to 85 dB at 500 Hz. Thresholds were statistically similar at 100 to 300 Hz with and without the wet-suit hood, but were significantly increased at 400 and 500 Hz with the hood (p < 0.001). In conclusion, at shallow depths, a 3-mm neoprene wet-suit hood attenuates underwater sound by approximately 10 dB for frequencies between 400 Hz and 500 Hz. At frequencies below 400 Hz, a 3-mm neoprene wet-suit hood offers no sound protection.

Internal Performance of a Fixed-Shroud Nonaxisymmetric Nozzle Equipped with an Aft-Hood Exhaust Deflector

NASA Technical Reports Server (NTRS)

Asbury, Scott C.

1997-01-01

An investigation was conducted in the model preparation area of the Langley 16-Foot Transonic Tunnel to determine the internal performance of a fixed-shroud nonaxisymmetric nozzle equipped with an aft-hood exhaust deflector. Model geometric parameters investigated included nozzle power setting, aft-hood deflector angle, throat area control with the aft-hood deflector deployed, and yaw vector angle. Results indicate that cruise configurations produced peak performance in the range consistent with previous investigations of nonaxisymmetric convergent-divergent nozzles. The aft-hood deflector produced resultant pitch vector angles that were always less than the geometric aft-hood deflector angle when the nozzle throat was positioned upstream of the deflector exit. Significant losses in resultant thrust ratio occurred when the aft-hood deflector was deployed with an upstream throat location. At each aft-hood deflector angle, repositioning the throat to the deflector exit improved pitch vectoring performance and, in some cases, substantially improved resultant thrust ratio performance. Transferring the throat to the deflector exit allowed the flow to be turned upstream of the throat at subsonic Mach numbers, thereby eliminating losses associated with turning supersonic flow. Internal throat panel deflections were largely unsuccessful in generating yaw vectoring.

Protective supplied breathing air garment

DOEpatents

Childers, E.L.; Hortenau, E.F. von.

1984-07-10

A breathing air garment is disclosed for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap. 17 figs.

Evaluation of commercially available techniques and development of simplified methods for measuring grille airflows in HVAC systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Iain S.; Wray, Craig P.; Guillot, Cyril

2003-08-01

In this report, we discuss the accuracy of flow hoods for residential applications, based on laboratory tests and field studies. The results indicate that commercially available hoods are often inadequate to measure flows in residential systems, and that there can be a wide range of performance between different flow hoods. The errors are due to poor calibrations, sensitivity of existing hoods to grille flow non-uniformities, and flow changes from added flow resistance. We also evaluated several simple techniques for measuring register airflows that could be adopted by the HVAC industry and homeowners as simple diagnostics that are often as accuratemore » as commercially available devices. Our test results also show that current calibration procedures for flow hoods do not account for field application problems. As a result, organizations such as ASHRAE or ASTM need to develop a new standard for flow hood calibration, along with a new measurement standard to address field use of flow hoods.« less

Optimum Tilt Angle of Flow Guide in Steam Turbine Exhaust Hood Considering the Effect of Last Stage Flow Field

NASA Astrophysics Data System (ADS)

CAO, Lihua; LIN, Aqiang; LI, Yong; XIAO, Bin

2017-07-01

Heat transfer and vacuum in condenser are influenced by the aerodynamic performance of steam turbine exhaust hood. The current research on exhaust hood is mainly focused on analyzing flow loss and optimal design of its structure without consideration of the wet steam condensing flow and the exhaust hood coupled with the front and rear parts. To better understand the aerodynamic performance influenced by the tilt angle of flow guide inside a diffuser, taking a 600 MW steam turbine as an example, a numerical simulator CFX is adopted to solve compressible three-dimensional (3D) Reynolds time-averaged N-S equations and standard k- ɛ turbulence model. And the exhaust hood flow field influenced by different tilt angles of flow guide is investigated with consideration of the wet steam condensing flow and the exhaust hood coupled with the last stage blades and the condenser throat. The result shows that the total pressure loss coefficient and the static pressure recovery coefficient of exhaust hood change regularly and monotonously with the gradual increase of tilt angle of flow guide. When the tilt angle of flow guide is within the range of 30° to 40°, the static pressure recovery coefficient is in the range of 15.27% to 17.03% and the total pressure loss coefficient drops to approximately 51%, the aerodynamic performance of exhaust hood is significantly improved. And the effective enthalpy drop in steam turbine increases by 0.228% to 0.274%. It is feasible to obtain a reasonable title angle of flow guide by the method of coupling the last stage and the condenser throat to exhaust hood in combination of the wet steam model, which provides a practical guidance to flow guide transformation and optimal design in exhaust hood.

Contrast fluoroscopic evaluation of gastrointestinal transit times with and without the use of falconry hoods in red-tailed hawks (Buteo jamaicensis).

PubMed

Doss, Grayson A; Williams, Jackie M; Mans, Christoph

2017-11-01

OBJECTIVE To evaluate gastrointestinal transit times in red-tailed hawks (Buteo jamaicensis) by use of contrast fluoroscopic imaging and investigate the effect of falconry hooding in these hawks on gastrointestinal transit time. DESIGN Prospective, randomized, blinded, complete crossover study. ANIMALS 9 healthy red-tailed hawks. PROCEDURES Hawks were gavage-fed a 30% weight-by-volume barium suspension (25 mL/kg [11.3 mL/lb]) into the crop. Fluoroscopic images were obtained at multiple time points after barium administration. Time to filling and emptying of various gastrointestinal tract organs and overall transit time were measured. The effect of hooding (hooded vs nonhooded) on these variables was assessed in a randomized complete crossover design. RESULTS In nonhooded birds, overall gastrointestinal transit time ranged from 30 to 180 minutes (mean ± SD, 100 ± 52 min). Time to complete crop emptying ranged from 30 to 180 minutes (83 ± 49 min). Contrast medium was present in the ventriculus in all birds within 5 minutes of administration and in the small intestines within 5 to 15 minutes (median, 5 min). Hooding of red-tailed hawks resulted in a significant delay of complete crop emptying (no hood, 83 ± 49 minutes; hood, 133 ± 48 minutes), but no significant effects of hooding were found on other measured variables. CONCLUSIONS AND CLINICAL RELEVANCE These results indicated that overall gastrointestinal transit times are faster in red-tailed hawks than has been reported for psittacines and that the use of a falconry hood in red-tailed hawks may result in delayed crop emptying. Hooding did not exert significant effects on overall gastrointestinal transit time in this raptorial species.

Particle release and control of worker exposure during laboratory-scale synthesis, handling and simulated spills of manufactured nanomaterials in fume hoods

NASA Astrophysics Data System (ADS)

Fonseca, Ana S.; Kuijpers, Eelco; Kling, Kirsten I.; Levin, Marcus; Koivisto, Antti J.; Nielsen, Signe H.; Fransman, W.; Fedutik, Yijri; Jensen, Keld A.; Koponen, Ismo K.

2018-02-01

Fume hoods are one of the most common types of equipment applied to reduce the potential of particle exposure in laboratory environments. A number of previous studies have shown particle release during work with nanomaterials under fume hoods. Here, we assessed laboratory workers' inhalation exposure during synthesis and handling of CuO, TiO2 and ZnO in a fume hood. In addition, we tested the capacity of a fume hood to prevent particle release to laboratory air during simulated spillage of different powders (silica fume, zirconia TZ-3Y and TiO2). Airborne particle concentrations were measured in near field, far field, and in the breathing zone of the worker. Handling CuO nanoparticles increased the concentration of small particles (< 58 nm) inside the fume hood (up to 1 × 105 cm-3). Synthesis, handling and packaging of ZnO and TiO2 nanoparticles did not result in detectable particle release to the laboratory air. Simulated powder spills showed a systematic increase in the particle concentrations inside the fume hood with increasing amount of material and drop height. Despite powder spills were sometimes observed to eject into the laboratory room, the spill events were rarely associated with notable release of particles from the fume hood. Overall, this study shows that a fume hood generally offers sufficient exposure control during synthesis and handling of nanomaterials. An appropriate fume hood with adequate sash height and face velocity prevents 98.3% of particles release into the surrounding environment. Care should still be made to consider spills and high cleanliness to prevent exposure via resuspension and inadvertent exposure by secondary routes.

Structure of transcription factor HetR required for heterocyst differentiation in cyanobacteria

PubMed Central

Kim, Youngchang; Joachimiak, Grazyna; Ye, Zi; Binkowski, T. Andrew; Zhang, Rongguang; Gornicki, Piotr; Callahan, Sean M.; Hess, Wolfgang R.; Haselkorn, Robert; Joachimiak, Andrzej

2011-01-01

HetR is an essential regulator of heterocyst development in cyanobacteria. HetR binds to a DNA palindrome upstream of the hetP gene. We report the crystal structure of HetR from Fischerella at 3.0 Å. The protein is a dimer comprised of a central DNA-binding unit containing the N-terminal regions of the two subunits organized with two helix-turn-helix motifs; two globular flaps extending in opposite directions; and a hood over the central core formed from the C-terminal subdomains. The flaps and hood have no structural precedent in the protein database, therefore representing new folds. The structural assignments are supported by site-directed mutagenesis and DNA-binding studies. We suggest that HetR serves as a scaffold for assembly of transcription components critical for heterocyst development. PMID:21628585

Low Temperature Hall Measurements of Neutron Irradiated Silicon Carbide

DTIC Science & Technology

2004-03-01

23 7. Cleaning Supplies in Hood. Samples were...chemicals used in the chemical hood. Figure 7: Cleaning Supplies in Hood. Samples were cleaned prior to contact deposition Additionally, the quartz tube used

Hood entry coefficients of compound exhaust hoods.

PubMed

Figueroa, Crescente E

2011-12-01

A traditional method for assessing the flow rate in ventilation systems is based on multiple readings of velocity or velocity pressure (VP) (usually 10 or 20 points) taken in ductwork sections located away from fittings (> seven × diameters of straight duct). This study seeks to eliminate the need for a multiple-point evaluation and replace it with a simplified method that requires only a single measurement of hood static pressure (SP(h)) taken at a more accessible location (< three × diameters of straight duct from the hood entry). The SP(h) method is widely used for the assessment of flow rate in simple hoods. However, industrial applications quite often use compound hoods that are regularly of the slot/plenum type. For these hoods, a "compound coefficient of entry" has not been published, which makes the use of the hood static pressure method unfeasible. This study proposes a model for the computation of a "compound coefficient of entry" and validates the use of this model to assess flow rate in two systems of well-defined geometry (multi-slotted/plenum and single-slotted/tapered or "fish-tail" types). When using a conservative value of the slot loss factor (1.78), the proposed model yielded an estimate of the volumetric flow rate within 10% of that provided by a more comprehensive method of assessment. The simplicity of the hood static pressure method makes it very desirable, even in the upper range of experimental error found in this study.

Flow characteristics and spillage mechanisms of an inclined quad-vortex range hood subject to influence from draft.

PubMed

Huang, Rong Fung; Chen, Jia-Kun; Lin, Jyun-Hua

2015-01-01

The flow and spillage characteristics of an inclined quad-vortex (IQV) range hood subject to the influence of drafts from various directions were studied. The laser-assisted smoke flow visualization technique was used to reveal the flow characteristics, and the tracer-gas (sulfur hexafluoride) concentration detection method was used to indicate the quantitative values of the capture efficiency of the hood. It was found that the leakage mechanisms of the IQV range hood are closely related to the flow characteristics. A critical draft velocity of about 0.5 m/s and a critical face velocity of about 0.25 m/s for the IQV range hood were found. When the IQV range hood was influenced by a draft with a velocity larger than the critical draft velocity, the spillage of pollutants became significant and the pollutant spillage rate increased with increasing draft velocity. At draft velocities less than or equal to the critical value, no containment leakages induced by the turbulence diffusion, reverse flow, or boundary-layer separation were observed, and the capture efficiency was about 100%. The IQV range hood exhibited a high ability to resist the influences of lateral and frontal drafts. The capture efficiency of the IQV range hood operated at the suction flow rate 5 to 9 m(3)/min is higher than that of the conventional range hood operated at 11 to 15 m(3)/min.

Humboldt Open Ocean Disposal Site (HOODS) Survey Work 2014

EPA Pesticide Factsheets

The Humboldt Open Ocean Disposal Site (HOODS) is a dredged material disposal site located 3 nautical miles (nm) offshore of Humboldt Bay in Northern California. HOODS was permanently designated by EPA Region 9 in 1995, and has been actively used for dredged material disposal operations since then. The HOODS has received higher volumes of dredged material than predicted since its designation in 1995, mainly from USACE construction and maintenance dredging.

Least-cost transportation planning in ODOT : phase 2 final report.

DOT National Transportation Integrated Search

1996-06-01

This project is intended to suggest ways in which least-cost planning principles could be incorporated into the transportation planning process. The Mt. Hood corridor was chosen for examination. The examination of the planning process highlighted sev...

Vortex ventilation in the laboratory environment.

PubMed

Meisenzahl, Lawrence R

2014-01-01

Assured containment at low airflow has long eluded the users of ventilated enclosures including chemical fume hoods used throughout industry. It is proposed that containment will be enhanced in a hood that has a particular interior shape that causes a natural vortex to occur. The sustained vortex improves the containment of contaminants within the enclosure at low airflow. This hypothesis was tested using the ASHRAE 110 tracer gas test. A known volume of tracer gas was emitted in the hood. A MIRAN SapphIRe infrared spectrometer was used to measure the concentration of tracer gas that escapes the enclosure. The design of the experiment included a written operating procedure, data collection plan, and statistical analysis of the data. A chemical fume hood of traditional design was tested. The hood interior was then reconstructed to enhance the development of a vortex inside the enclosure. The hood was retested using the same method to compare the performance of the traditional interior shape with the enhanced vortex shape. In every aspect, the vortex hood showed significant improvement over the traditional hood design. Use of the Hood Index characterizing the dilution of gas in an air stream as a logarithmic function indicates a causal relationship between containment and volumetric airflow through an enclosure. Use of the vortex effect for ventilated enclosures can provide better protection for the user and lower operating cost for the owner. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a data collection spreadsheet, data analysis, and data collection procedure.].

Effects of boundary-layer separation controllers on a desktop fume hood.

PubMed

Huang, Rong Fung; Chen, Jia-Kun; Hsu, Ching Min; Hung, Shuo-Fu

2016-10-02

A desktop fume hood installed with an innovative design of flow boundary-layer separation controllers on the leading edges of the side plates, work surface, and corners was developed and characterized for its flow and containment leakage characteristics. The geometric features of the developed desktop fume hood included a rearward offset suction slot, two side plates, two side-plate boundary-layer separation controllers on the leading edges of the side plates, a slanted surface on the leading edge of the work surface, and two small triangular plates on the upper left and right corners of the hood face. The flow characteristics were examined using the laser-assisted smoke flow visualization technique. The containment leakages were measured by the tracer gas (sulphur hexafluoride) detection method on the hood face plane with a mannequin installed in front of the hood. The results of flow visualization showed that the smoke dispersions induced by the boundary-layer separations on the leading edges of the side plates and work surface, as well as the three-dimensional complex flows on the upper-left and -right corners of the hood face, were effectively alleviated by the boundary-layer separation controllers. The results of the tracer gas detection method with a mannequin standing in front of the hood showed that the leakage levels were negligibly small (≤0.003 ppm) at low face velocities (≥0.19 m/s).

Earth Observations taken by the Expedition 20 crew

NASA Image and Video Library

2009-08-05

ISS020-E-028123 (5 Aug. 2009) --- Mount Hood, Oregon is featured in this image photographed by an Expedition 20 crew member on the International Space Station. Mount Hood is located within the Cascade Range of the western United States, and is the highest peak (3,426 m) in Oregon. The Cascade Range is characterized by a line of volcanoes associated with a slab of oceanic crust that is subducting, or descending underneath, the westward moving continental crust of North America. Magma generated by the subduction process rises upward through the crust and feeds a line of active volcanoes that extends from northern California in the United States to southern British Columbia in Canada. While hot springs and steam vents are still active on Mount Hood, the last eruption from the volcano occurred in 1866. The volcano is considered dormant, but still actively monitored. Separate phases of eruptive activity produced pyroclastic flows and lahars ? mudflows ? that carried erupted materials down all of the major rivers draining the volcano. Gray volcanic deposits extend southwards along the banks of the White River (upper right), and form several prominent ridges along the southeast to southwest flanks of the volcano. The deposits contrast sharply with the green vegetated lower flanks of the volcano. The Mount Hood stratovolcano ? a typically cone-shaped volcanic structure formed by interlayered lava flows and explosive eruption deposits ? hosts twelve mapped glaciers along its upper flanks (center). Like other glaciers in the Pacific Northwest, the Hood glaciers have been receding due to global warming, and have lost an estimated 61 percent of their volume over the past century. The predicted loss of glacial meltwater under future warming scenarios will have significant effects on regional hydrology and water supplies.

Life Sciences Laboratory 2 Fan Exhaust Mixing Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flaherty, Julia E.; Antonio, Ernest J.

An SF 6 tracer release was performed in the LSL-II ventilation stack over the weekend of March 5, 2016. The primary purpose of this study was to experimentally determine the gaseous concentration of material from a fume hood to the fan outlet, as well as at typical worker locations, to gain an understanding of potential worker exposures impacts. Five different fan operating configurations were utilized to ensure that the full spectrum of historical operating configurations was addressed. Some summary points from this study include: •Relatively high concentrations were observed within the stack area. –Between 50 and 100% of the exhaustmore » concentration may be observed within the stack. •Background concentrations were observed outside the stack area. –Workers outside the stack itself, but on the roof, are unlikely to be impacted by the exhaust. •Elevated concentrations on the order of 25% of the exhaust concentrations were observed within the Penthouse. •Transport time from a laboratory fume hood to the exhaust fan is within one to two minutes. •Penthouse concentrations climb from background levels to steady state over 15+ minutes. •Wind speed and wind direction did not play a significant role in the test outcomes. –A slight bias in the concentration distribution may be discernable based on wind speed and direction. •When both fans are operating, material from fume hoods on the east side preferentially flow through the east fan, while material from fume hoods on the west side preferentially flow through the west fan. This effectively doubles the concentration at that fan. This mixing study will inform other study components to develop a more complete picture of the worker potential exposure from LSL-II Rooftop activities. Estimating the mean concentration in the stack from chemical inventories and fume hood emissions for both current and historical laboratory activities is a separate effort. These estimates of mean ventilation concentrations will utilize this mixing study to estimate the potential exposure to workers working in and around the LSL-II stack.« less

Photographic copy of U.S. Army Corps of Engineers, Fort Worth, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of U.S. Army Corps of Engineers, Fort Worth, Texas, drawing (original located at Fort Hood, Texas), 1989 Site plan of North Fort Hood - Fort Hood, World War II Temporary Buildings, Killeen, Bell County, TX

Photographic copy of U.S. Army Corps of Engineers, Fort Worth, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of U.S. Army Corps of Engineers, Fort Worth, Texas, drawing (original located at Fort Hood, Texas), 1989 Site plan of South Fort Hood - Fort Hood, World War II Temporary Buildings, Killeen, Bell County, TX

EVALUATION OF LEAKAGE FROM FUME HOODS USING TRACER GAS, TRACER NANOPARTICLES AND NANOPOWDER HANDLING TEST METHODOLOGIES

PubMed Central

Dunn, Kevin H.; Tsai, Candace Su-Jung; Woskie, Susan R.; Bennett, James S.; Garcia, Alberto; Ellenbecker, Michael J.

2015-01-01

The most commonly reported control used to minimize workplace exposures to nanomaterials is the chemical fume hood. Studies have shown, however, that significant releases of nanoparticles can occur when materials are handled inside fume hoods. This study evaluated the performance of a new commercially available nano fume hood using three different test protocols. Tracer gas, tracer nanoparticle, and nanopowder handling protocols were used to evaluate the hood. A static test procedure using tracer gas (sulfur hexafluoride) and nanoparticles as well as an active test using an operator handling nanoalumina were conducted. A commercially available particle generator was used to produce sodium chloride tracer nanoparticles. Containment effectiveness was evaluated by sampling both in the breathing zone (BZ) of a mannequin and operator as well as across the hood opening. These containment tests were conducted across a range of hood face velocities (60, 80, and 100 feet/minute) and with the room ventilation system turned off and on. For the tracer gas and tracer nanoparticle tests, leakage was much more prominent on the left side of the hood (closest to the room supply air diffuser) although some leakage was noted on the right side and in the BZ sample locations. During the tracer gas and tracer nanoparticle tests, leakage was primarily noted when the room air conditioner was on for both the low and medium hood exhaust air flows. When the room air conditioner was turned off, the static tracer gas tests showed good containment across most test conditions. The tracer gas and nanoparticle test results were well correlated showing hood leakage under the same conditions and at the same sample locations. The impact of a room air conditioner was demonstrated with containment being adversely impacted during the use of room air ventilation. The tracer nanoparticle approach is a simple method requiring minimal setup and instrumentation. However, the method requires the reduction in background concentrations to allow for increased sensitivity. PMID:25175285

Evaluation of leakage from fume hoods using tracer gas, tracer nanoparticles and nanopowder handling test methodologies.

PubMed

Dunn, Kevin H; Tsai, Candace Su-Jung; Woskie, Susan R; Bennett, James S; Garcia, Alberto; Ellenbecker, Michael J

2014-01-01

The most commonly reported control used to minimize workplace exposures to nanomaterials is the chemical fume hood. Studies have shown, however, that significant releases of nanoparticles can occur when materials are handled inside fume hoods. This study evaluated the performance of a new commercially available nano fume hood using three different test protocols. Tracer gas, tracer nanoparticle, and nanopowder handling protocols were used to evaluate the hood. A static test procedure using tracer gas (sulfur hexafluoride) and nanoparticles as well as an active test using an operator handling nanoalumina were conducted. A commercially available particle generator was used to produce sodium chloride tracer nanoparticles. Containment effectiveness was evaluated by sampling both in the breathing zone (BZ) of a mannequin and operator as well as across the hood opening. These containment tests were conducted across a range of hood face velocities (60, 80, and 100 ft/min) and with the room ventilation system turned off and on. For the tracer gas and tracer nanoparticle tests, leakage was much more prominent on the left side of the hood (closest to the room supply air diffuser) although some leakage was noted on the right side and in the BZ sample locations. During the tracer gas and tracer nanoparticle tests, leakage was primarily noted when the room air conditioner was on for both the low and medium hood exhaust airflows. When the room air conditioner was turned off, the static tracer gas tests showed good containment across most test conditions. The tracer gas and nanoparticle test results were well correlated showing hood leakage under the same conditions and at the same sample locations. The impact of a room air conditioner was demonstrated with containment being adversely impacted during the use of room air ventilation. The tracer nanoparticle approach is a simple method requiring minimal setup and instrumentation. However, the method requires the reduction in background concentrations to allow for increased sensitivity.

Exhaust system for use with a turbine and method of assembling same

DOEpatents

Dalsania, Prakash Bavanjibhai; Sadhu, Antanu

2015-08-18

An exhaust system for use with a steam turbine is provided. An exhaust hood includes an input and an output, the input receiving fluid from the steam turbine. The exhaust hood includes a first side wall that extends between the input and the output. The first side wall includes an aperture. An ejector is coupled to the exhaust hood. The ejector includes inlets and an outlet. At least one of the inlets receives fluid from the exhaust hood via the aperture.

Fort Hood Army Internal Review Team: Final Report

DTIC Science & Technology

2010-08-04

Report Date l August 4, 2010 Protecting our Army community at home & abroad Army Internal Review Team : Final Report Report Documentation Page Form...DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Fort Hood Army Internal Review Team : Final Report 5a. CONTRACT NUMBER 5b. GRANT...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 FoRt Hood Army Internal Review team : Final Report August 4, 2010 1 FoRt Hood Army

Characterization of Metal-Insulator-Transition (MIT) Phase Change Materials (PCM) for Reconfigurable Components, Circuits, and Systems

DTIC Science & Technology

2013-03-01

materials have been introduced as dopants: Vanadium (V), Chromium (Cr), Manganese (Mn), Lead (Pb), and Iron (Fe) [41, 42, 43, 44]. While these...value reported in literature, 188°C, due to the samples being heated on an open air hot plate in a laminar flow fume hood. The average resistivity of

Fort Hood Building and Landscape Inventory with WWII and Cold War Context

DTIC Science & Technology

2007-03-01

barracks, 1970s (NARA)........................................................... 112 Figure 37. Palmer Movie Theater (NARA...revised 1953) showing layout of Hood Village and trailer park (Fort Hood...arms ammunition storage building #92012 (ERDC-CERL, 2004). ......... 260 Figure 163: Radio reception building #92063 (ERDC-CERL, 2004

Determination of the internal exposure hazard from plutonium work in an open front hood

NASA Astrophysics Data System (ADS)

Olson, Cheryl Lynn

Work with hazardous substances, such as radioactive material, can be done safely when engineered controls are used to maintain the worker effective dose below the International Commission on Radiological Protection ICRP 60 recommendation of 0.02 Sv/year and reduce the worker exposure to material to as low as reasonably achievable (ALARA). A primary engineered control used at a Los Alamos National Laboratory facility is the open-front hood. An open-front hood, also known as an open-front box, is a laboratory containment box that is fully enclosed except for a 15-cm opening along the front of the box. This research involved collection of the aerosol escaping an open-front hood while PuO2 sample digestion was simulated. Sodium chloride was used as a surrogate to mimic the behavior of PuO2. The NaCl aerosol was binned as a function of median aerodynamic diameter using a Micro-orifice Uniform Deposit Impactor (MOUDI, MSP Corporation, Shoreview, MN) cascade impactor. Using neutron activation analysis (NAA) to measure the mass of material in each of the nine bins of the MOUDI, the mass median diameter of the escaping aerosol was determined. Using the mass median diameter and the total mass of the particle distribution, dose was calculated using ICRP 60 methodology. Experimental conditions mimicked a stationary worker and a worker moving her hands in and out of the open front hood. Measurements were also done in the hood for comparison. The effect of the hands moving in and out of the box was modeled. Information necessary for Computational Fluid Dynamics (CFD) modeling is given, such as volumetric flow rates out of the open front hood and into the experimental room, detailed sketches of the experimental set-up, and energy provided by the hot plate and worker. This research is unique as it measures particle size distribution from routine working conditions. Current research uses tracer gases or describes non-routine conditions. It is important to have results that mimic routine conditions to allow for quantitative measurement of worker exposure and determination of the adequacy of the open front hood for this type of work. This work is important as it quantifies the effectiveness of the open front hood for controlling inhalation hazards. This information is crucial for managing the risk to workers. The mass median diameter of particles escaping the hood when a stationary worker sits in front of the hood is 0.54 +/- 3.7 mum. The mass median diameter of particles escaping the hood when a worker performs work in the hood is 0.35 +/- 5.1 mum. These particle sizes are in the range of those seen in the published liturature. (Raabe, et al., 1978; Dorrian and Bailey, 1995; and Cheng, et al., 2004) The effective dose from digestion of PuO2 in an open-front hood while a worker is moving her hands in and out of the hood was estimated to be 5 mSv. Based on the experimental error, this value could be low by a factor of 4. There was little difference between the dose calculated for a worker in motion and a stationary worker. The calculated dose while work was being performed is 5% higher. Comparison of these results to measured worker doses and continuous air monitoring results showed the experimental results may be somewhat higher. The lower limit of detection for urine bioassay is 0.002 Sv (Inkret, et al., 1999). Workers performing the activity mimicked in this experiment are routinely monitored and do not have measurable internal doses. The most likely reason for the high experimental results is the placement of the sample digestion apparatus. For this experiment, the material was placed 10 cm from the hood opening. In practice, the material is typically further back in the hood; placing the material further back in the hood likely decreases the amount of material escaping the hood. The cost-benefit analysis showed the use of the open-front hood as a reasonable protective measure. Although worker exposure may approach the ICRP limit, the cost of previously observed ergonomic injuries caused by work in a glove box is five thousand times greater than the dose received by the worker. Protective measures such as respiratory protection should be evaluated on a case by case basis to keep worker exposure as low as reasonably achievable.

10 CFR 433.5 - Performance level determination.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Each Federal agency shall consider laboratory fume hoods and kitchen ventilation systems as part of the ASHRAE-covered HVAC loads subject to the 30 percent savings requirements, rather than as process loads. ...

10 CFR 433.5 - Performance level determination.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Each Federal agency shall consider laboratory fume hoods and kitchen ventilation systems as part of the ASHRAE-covered HVAC loads subject to the 30 percent savings requirements, rather than as process loads. ...

Cognitive Style Mapping at Mt. Hood Community College.

ERIC Educational Resources Information Center

Keyser, John S.

1980-01-01

Describes Mount Hood Community College's experiences using the Modified Hill Model for Cognitive Style Mapping (CSM). Enumerates the nine dimensions of cognitive style assessed by the model. Discusses the value and limitations of CSM, five major checks on the validity of the model, and Mount Hood faculty's involvement with CSM. (AYC)

Hood: Answers in Action.

ERIC Educational Resources Information Center

Hood Coll., Frederick, MD.

The president of Hood College, a liberal arts college for women located in Frederick, Maryland, considers the challenges confronting American higher education and describes what one college is doing to meet them. A description of Hood College and American higher education is provided. Seven sections focus on the following: (1) matters of equity…

Contamination Status of Seven Elements in Hooded Cranes Wintering in South-West Kyushu, Japan: Comparison with Red-Crowned Cranes in Hokkaido, Japan.

PubMed

Teraoka, Hiroki; Miyagi, Hasumi; Haraguchi, Yuko; Takase, Kozo; Kitazawa, Takio; Noda, Jun

2018-05-31

The hooded crane is designated as an endangered species. The cranes breed primarily in wetlands in southeast Russia and China in summer. Most of the hooded crane population winters in the Izumi plain in Japan. It is difficult to know the contamination status of their habitat because of their vast breeding area. We determined the levels of Cd, Pb, As, (total) Hg, Se, Zn, and Cu in the liver, kidney, and muscle of hooded cranes that were found dead in Izumi in the periods 2003-2006 and 2014-2015 compared with the levels in red-crowned cranes in Hokkaido, Japan, as the only cranes in which these elements had been studied extensively. There were no notable differences between levels of the seven elements in the two periods. Overall, tissue levels of the elements examined in hooded cranes were comparable to those in red-crowned cranes except for Hg and Se. Tissue levels of Hg and Se were clearly lower in hooded cranes than in red-crowned cranes that were found dead from 2000. One lead poisoning case was confirmed. The results suggest that Hooded cranes wintering in Izumi are not extensively contaminated with the seven elements examined.

Immersive cyberspace system

NASA Technical Reports Server (NTRS)

Park, Brian V. (Inventor)

1997-01-01

An immersive cyberspace system is presented which provides visual, audible, and vibrational inputs to a subject remaining in neutral immersion, and also provides for subject control input. The immersive cyberspace system includes a relaxation chair and a neutral immersion display hood. The relaxation chair supports a subject positioned thereupon, and places the subject in position which merges a neutral body position, the position a body naturally assumes in zero gravity, with a savasana yoga position. The display hood, which covers the subject's head, is configured to produce light images and sounds. An image projection subsystem provides either external or internal image projection. The display hood includes a projection screen moveably attached to an opaque shroud. A motion base supports the relaxation chair and produces vibrational inputs over a range of about 0-30 Hz. The motion base also produces limited translation and rotational movements of the relaxation chair. These limited translational and rotational movements, when properly coordinated with visual stimuli, constitute motion cues which create sensations of pitch, yaw, and roll movements. Vibration transducers produce vibrational inputs from about 20 Hz to about 150 Hz. An external computer, coupled to various components of the immersive cyberspace system, executes a software program and creates the cyberspace environment. One or more neutral hand posture controllers may be coupled to the external computer system and used to control various aspects of the cyberspace environment, or to enter data during the cyberspace experience.

Population sizes and group characteristics of Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) in Poyang Lake Wetland

PubMed Central

SHAO, Ming-Qin; GUO, Hong; JIANG, Jian-Hong

2014-01-01

Both the Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) have limited population sizes and are considered endangered by domestic Chinese and international agencies. To document the current size of their respective populations and characterize their groups, between October 2012 and April 2013 we undertook fieldwork at four nature reserve areas within the Poyang Lake wetlands. We divided Poyanghu National Nature Reserve (PYH) into the Wucheng (PWC) and Hengfeng areas (PHF), because each are each located in different counties. Our fieldwork showed that the Siberian Crane occurred mainly in PYH (364 in the PHF, 158 in the PWC) and the Nanjishan Wetland National Nature Reserve (NJS, with 200 individuals). The Hooded Crane was mainly distributed in PYH (302 in the PHF and 154 in the PWC). Family groups accounted for more than 50% of the total number of groups among both species, with Hooded Cranes forming more family groups than Siberian Cranes. Typically, these groups were formed of two adults with one offspring (Siberian Crane), and two adults with two offspring (Hooded Crane), with the mean family group size of the Siberian Crane and Hooded Crane being respectively 2.65±0.53 (n=43) and 3.09±0.86 (n=47) individuals per group. The mean collective group size of the Siberian Crane and Hooded Crane included 28.09±24.94 (n=23) and 28.94±27.97 (n=16) individuals per group, respectively, with the proportion of juveniles among Hooded Cranes being more than double that seen among the Siberian Cranes. PMID:25297076

Assessing post-fire Douglas-fir mortality and Douglas-fir beetle attacks in the northern Rocky Mountains

Treesearch

Sharon Hood; Barbara Bentz; Ken Gibson; Kevin Ryan; Gregg DeNitto

2007-01-01

Douglas-fir has life history traits that greatly enhance resistance to injury from fire, thereby increasing post-fire survival rates. Tools for predicting the probability of tree mortality following fire are important components of both pre-fire planning and post-fire management efforts. Using data from mixed-severity wildfire in Montana and Wyoming, Hood and Bentz (...

33 CFR 165.1339 - Safety Zone; Coast Guard Exercise Area, Hood Canal, Washington.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety Zone; Coast Guard Exercise... § 165.1339 Safety Zone; Coast Guard Exercise Area, Hood Canal, Washington. (a) Location. The following... Coast Guard training exercise while such vessel is transiting Hood Canal, WA between Foul Weather Bluff...

33 CFR 165.1339 - Safety Zone; Coast Guard Exercise Area, Hood Canal, Washington.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Safety Zone; Coast Guard Exercise... § 165.1339 Safety Zone; Coast Guard Exercise Area, Hood Canal, Washington. (a) Location. The following... Coast Guard training exercise while such vessel is transiting Hood Canal, WA between Foul Weather Bluff...

42 CFR 84.135 - Half-mask facepieces, full facepieces, hoods, and helmets; fit; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods, and... OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.135 Half-mask facepieces, full facepieces, hoods, and helmets; fit; minimum requirements. (a) Half-mask facepieces and full facepieces shall...

42 CFR 84.175 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods....175 Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. (a) Half-mask facepieces and full facepieces shall be designed and constructed to fit persons with...

77 FR 26699 - Safety Zone; Coast Guard Exercise, Hood Canal, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

... would be impracticable to delay this important exercise to allow for a delayed effective date...-AA00 Safety Zone; Coast Guard Exercise, Hood Canal, WA AGENCY: Coast Guard, DHS. ACTION: Temporary... a Coast Guard Ready for Operations exercise in Hood Canal, WA that will take place between May 08...

33 CFR 334.1220 - Hood Canal, Bangor; naval restricted areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Hood Canal, Bangor; naval..., Bangor; naval restricted areas. (a) Hood Canal, Bangor; Naval restricted areas—(1) Area No. 1. That area...) Area No. 1. No person or vessel shall enter this area without permission from the Commander, Naval...

33 CFR 334.1220 - Hood Canal, Bangor; naval restricted areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Hood Canal, Bangor; naval..., Bangor; naval restricted areas. (a) Hood Canal, Bangor; Naval restricted areas—(1) Area No. 1. That area...) Area No. 1. No person or vessel shall enter this area without permission from the Commander, Naval...

Brucella pinnipedialis hooded seal (Cystophora cristata) strain in the mouse model with concurrent exposure to PCB 153.

PubMed

Nymo, Ingebjørg H; das Neves, Carlos G; Tryland, Morten; Bårdsen, Bård-Jørgen; Santos, Renato Lima; Turchetti, Andreia Pereira; Janczak, Andrew M; Djønne, Berit; Lie, Elisabeth; Berg, Vidar; Godfroid, Jacques

2014-05-01

Brucellosis, a worldwide zoonosis, is linked to reproductive problems in primary hosts. A high proportion of Brucella-positive hooded seals (Cystophora cristata) have been detected in the declined Northeast Atlantic stock. High concentrations of polychlorinated biphenyls (PCBs) have also been discovered in top predators in the Arctic, including the hooded seal, PCB 153 being most abundant. The aim of this study was to assess the pathogenicity of Brucella pinnipedialis hooded seal strain in the mouse model and to evaluate the outcome of Brucella spp. infection after exposure of mice to PCB 153. BALB/c mice were infected with B. pinnipedialis hooded seal strain or Brucella suis 1330, and half from each group was exposed to PCB 153 through the diet. B. pinnipedialis showed a reduced pathogenicity in the mouse model as compared to B. suis 1330. Exposure to PCB 153 affected neither the immunological parameters, nor the outcome of the infection. Altogether this indicates that it is unlikely that B. pinnipedialis contribute to the decline of hooded seals in the Northeast Atlantic. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effectiveness of catch basins equipped with hoods in retaining gross solids and hydrocarbons in highway runoff, Southeast Expressway, Boston, Massachusetts, 2008-09

USGS Publications Warehouse

Smith, Kirk P.

2011-01-01

Stormwater mobilizes litter and other debris along the roadway where it is transported to the highway drainage systems. Initial treatment for stormwater runoff typically is provided by catch basins in highway settings. Modification of catch basins to include hoods that cover the catch-basin outlet is intended to enhance catch-basin performance by retaining floatable debris and various hydrophobic organic compounds that tend to float on the water surface within the sump of the catch basin. The effectiveness of six deep-sump off-line catch basins equipped with hoods in reducing the mass of gross solids greater than 0.25 inches in diameter and concentrations of oil and grease (OG) and total petroleum hydrocarbons (TPH) was examined along the Southeast Expressway, in Boston, Massachusetts. Two deep-sump catch basins were equipped with cast-iron hoods. Three were equipped with molded plastic hoods, known as an Eliminator, and a single catch basin was equipped with a fiberglass anti-siphoning hood, known as a Snout. Samples of gross solids greater than 0.25 inches in diameter, excluding gravel and metallic materials, were routinely collected for a 6-month period from a collection structure mounted at the end of each catch-basin outlet pipe. After about 6 months, all floatable, saturated low-density and high-density solids were removed from each catch basin. In addition to the collection of samples of gross solids, samples of sump water from five catch basins and flow-weighted composite samples of stormwater from the outlet of one catch basin were collected and analyzed for concentrations of OG and TPH. A mass balance approach was used to assess the effectiveness of each catch basin equipped with a hood in retaining gross solids. The effectiveness of the deep-sump catch basins fitted with one of three types of hoods in retaining gross solids ranged from 27 to 52 percent. From 45 to 90 percent of the gross solids collected from the catch-basin sumps were composed of materials made of high-density plastics that did not float in water, and as a result, the effect that the catch-basin hoods had on these materials likely was marginal. The effectiveness for the deep-sump hooded catch basins, excluding the mass of high-density materials identified in the solids collected from the outlet pipe and the sump of the catch basins, ranged from 13 to 38 percent. The effectiveness for each catch basin, based solely on the material that remained floating at the end of the monitoring period, was less than 11 percent; however, these values likely underestimate the effectiveness of the hooded catch basins because much of the low-density material collected from the sumps may have been retained as floatable material before it was saturated and settled during non-storm conditions. The effectiveness of the catch basins equipped with hoods in reducing gross solids was not greatly different among the three types of hoods tested in this study. Concentrations of OG and TPH collected from the water surface of the catch-basins varied from catch basin to catch basin and were similar to concentrations of flow-weighted composite samples collected during storms. Comparisons indicate concentrations of OG and TPH in flow-weighted composite samples collected at the outlet of a catch basin equipped with an Eliminator hood were not substantially different from concentrations of the respective constituents in flow-weighted composite samples collected during a previous study from catch basins containing cast-iron hoods in the same study area. The similarity between these flow-weighted concentrations and the concentrations of the respective constituents in a vertical profile sample collected from the catch-basin sump indicates that OG and TPH are emulsified in the sump of each catch basin during storms and circumvent the hoods.

Protective shield for an instrument probe

DOEpatents

Johnsen, Howard A.; Ross, James R.; Birtola, Sal R.

2004-10-26

A shield is disclosed that is particularly useful for protecting exposed optical elements at the end of optical probes used in the analysis of hazardous emissions in and around an industrial environment from the contaminating effects of those emissions. The instant invention provides a hood or cowl in the shape of a right circular cylinder that can be fitted over the end of such optical probes. The hood provides a clear aperture through which the probe can perform unobstructed analysis. The probe optical elements are protected from the external environment by passing a dry gas through the interior of the hood and out through the hood aperture in sufficient quantity and velocity to prevent any significant mixing between the internal and external environments. Additionally, the hood is provided with a cooling jacket to lessen the potential for damaging the probe due to temperature excursions.

Entry and Elimination of Marine Mammal Brucella spp. by Hooded Seal (Cystophora cristata) Alveolar Macrophages In Vitro

PubMed Central

Larsen, Anett K.; Nymo, Ingebjørg H.; Boysen, Preben; Tryland, Morten; Godfroid, Jacques

2013-01-01

A high prevalence of Brucella pinnipedialis serology and bacteriology positive animals has been found in the Northeast Atlantic stock of hooded seal ( Cystophora cristata ); however no associated gross pathological changes have been identified. Marine mammal brucellae have previously displayed different infection patterns in human and murine macrophages. To investigate if marine mammal Brucella spp. are able to invade and multiply in cells originating from a presumed host species, we infected alveolar macrophages from hooded seal with a B . pinnipedialis hooded seal isolate. Hooded seal alveolar macrophages were also challenged with B . pinnipedialis reference strain (NCTC 12890) from harbor seal ( Phoca vitulina ), B . ceti reference strain (NCTC 12891) from harbor porpoise ( Phocoena phocoena ) and a B . ceti Atlantic white-sided dolphin ( Lagenorhynchus acutus ) isolate (M83/07/1), to evaluate possible species-specific differences. Brucella suis 1330 was included as a positive control. Alveolar macrophages were obtained by post mortem bronchoalveolar lavage of euthanized hooded seals. Phenotyping of cells in the lavage fluid was executed by flow cytometry using the surface markers CD14 and CD18. Cultured lavage cells were identified as alveolar macrophages based on morphology, expression of surface markers and phagocytic ability. Alveolar macrophages were challenged with Brucella spp. in a gentamicin protection assay. Following infection, cell lysates from different time points were plated and evaluated quantitatively for colony forming units. Intracellular presence of B . pinnipedialis hooded seal isolate was verified by immunocytochemistry. Our results show that the marine mammal brucellae were able to enter hooded seal alveolar macrophages; however, they did not multiply intracellularly and were eliminated within 48 hours, to the contrary of B. suis that showed the classical pattern of a pathogenic strain. In conclusion, none of the four marine mammal strains tested were able to establish a persistent infection in primary alveolar macrophages from hooded seal. PMID:23936159

The gut microbiome of hooded cranes (Grus monacha) wintering at Shengjin Lake, China.

PubMed

Zhao, Guanghong; Zhou, Lizhi; Dong, Yuanqiu; Cheng, Yuanyuan; Song, Yunwei

2017-06-01

Gut microbes of animals play critical roles in processes such as digestion and immunity. Therefore, identifying gut microbes will shed light on understanding the annual life of animal species, particularly those that are threatened or endangered. In the present study, we conducted nucleotide sequence analyses of the 16S rRNA genes of gut microbiome of the hooded cranes (Grus monacha) wintering at Shengjin Lake, China, by Illumina high-throughput sequencing technology. We acquired 503,398 high-quality sequences and 785 operational taxonomic units (OTUs) from 15 fecal samples from different cranes, representing 22 phyla that were dominated by Firmicutes, Proteobacteria, and Actinobacteria. A total of 305 genera were identified that were dominated by Clostridium, Lysinibacillus, and Enterobacter. The core gut microbiome comprised 26 genera, including many probiotic species such as Clostridium, Bacillus, Cellulosilyticum, and Cellulomonas that could catabolize cellulose. The findings reported here contribute to our knowledge of the microbiology of hooded cranes and will likely advance efforts to protect waterbirds that inhabit Shengjin Lake Reserve during winter. © 2017 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Management Observation Facility Fume Hoods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sundsmo, V. A.

I reviewed all the hoods used for AS&I work in buildings 253, 254, and 255. All have had the minimum annual surveys conducted and some have had semi-annual reviews. The operating parameter labels are posted consistent to the right or above right (with the only exception the perchloric acid hood in 1734- on the left) which facilitates users knowing where to check for information. All hoods with sash doors (except the SE one in 1734 have a note on the Operating Parameters label to "keep sash doors closed". Again, this was checking consistency. No surveys were missed.

Installation of a flow control device in an inclined air-curtain fume hood to control wake-induced exposure.

PubMed

Chen, Jia-Kun

2016-08-01

An inclined plate for flow control was installed at the lower edge of the sash of an inclined air-curtain fume hood to reduce the effects of the wake around a worker standing in front of the fume hood. Flow inside the fume hood is controlled by the inclined air-curtain and deflection plates, thereby forming a quad-vortex flow structure. Controlling the face velocity of the fume hood resulted in convex, straight, concave, and attachment flow profiles in the inclined air-curtain. We used the flow visualization and conducted a tracer gas test with a mannequin to determine the performance of two sash geometries, namely, the half-cylinder and inclined plate designs. When the half-cylinder design was used, the tracer gas test registered a high leakage concentration at Vf ≦ 57.1 fpm or less. This concentration occurred at the top of the sash opening, which was close to the breathing zone of the mannequin placed in front of the fume hood. When the inclined plate design was used, the containment was good, with concentrations of 0.002-0.004 ppm, at Vf ≦ 63.0 fpm. Results indicate that an inclined plate effectively reduces the leakage concentration induced by recirculation flow structures that form in the wake of a worker standing in front of an inclined air-curtain fume hood.

Effects of Hoods and Flame-Retardant Fabrics on WBGT Clothing Adjustment Factors.

PubMed

Ashley, Candi D; Bernard, Thomas E

2008-01-01

Personal protective clothing (PPC) may include hoods and flame-retardant (FR) fabrics that may affect heat transfer and, thus, the critical wet bulb globe temperature (WBGT crit) to maintain thermal equilibrium. The purpose of this study was to compare the differences in WBGT crit for hooded vs. nonhooded versions of particle barrier and vapor barrier coveralls as well as for coveralls made of two flame-retardant fabrics (INDURA cotton and Nomex). Acclimated men (n = 11) and women (n = 4) walked on a treadmill in a climatic chamber at 180 W/m2 wearing four different ensembles: limited-use, particle barrier coveralls with and without a hood (Tyvek 1427), and limited-use vapor barrier coveralls with and without a hood (Tychem QC, polyethylene-coated Tyvek). Twelve of the participants wore one of two flame-retardant coveralls. All participants wore standard cotton clothing. Progressive exposure testing at 50% relative humidity (rh) was designed so that each subject established a physiological steady-state followed by a clear loss of thermal equilibrium. WBGT crit was the WBGT 5 min prior to a loss of thermal equilibrium. Hooded ensembles had a lower WBGT crit than the nonhooded ensembles. The difference suggested a clothing adjustment of 1 degrees C for hoods. There were no significant differences among the FR ensembles and cotton work cloths, and the proposed clothing adjustment for FR coveralls clothing is 0 degrees C.

Performance of particulate containment at nanotechnology workplaces

NASA Astrophysics Data System (ADS)

Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

2015-11-01

The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These control assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37 % reduction on the particle concentration in the worker's breathing zone, and produce a 42 % lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15-20 % higher ultrafine (<500 nm) particle concentrations at the source and at the worker's breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored.

76 FR 70649 - Safety Zone; Department of Defense Exercise, Hood Canal, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

...-AA00 Safety Zone; Department of Defense Exercise, Hood Canal, WA AGENCY: Coast Guard, DHS. ACTION... involved in a Department of Defense exercise in Hood Canal, WA that will take place on November 21, 2011. A... would end. These Department of Defense (DOD) vessels have an important and urgent need to perform this...

77 FR 59083 - Safety Zone; Coast Guard Exercise, Hood Canal, Washington

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-26

... 1625-AA00 Safety Zone; Coast Guard Exercise, Hood Canal, Washington AGENCY: Coast Guard, DHS. ACTION... involved in a Coast Guard Ready for Operations exercise in Hood Canal, WA that will take place between Oct... during the exercise and will do so by prohibiting any person or vessel from entering or remaining in the...

Unsterblicher Robin Hood--Eine literaturdidaktische Betrachtung und Wertung von zwoelf Lektueretexten (Immortal Robin Hood--A Pedagogical Consideration and Evaluation of Twelve Reading Texts).

ERIC Educational Resources Information Center

Hoegel, Rolf

1979-01-01

Examines 12 reading texts about Robin Hood, with regard to their content, suitability for various age levels, and language difficulty. The texts are found to be best suited for grades 5 and 6. An evaluation of each text is included. (IFS/WGA)

EVALUATION OF ENGINEERING CONTROLS FOR THE MIXING OF FLAVORINGS CONTAINING DIACETYL AND OTHER VOLATILE INGREDIENTS

PubMed Central

Hirst, Deborah V.L.; Dunn, Kevin H.; Shulman, Stanley A.; Hammond, Duane R.; Sestito, Nicholas

2015-01-01

Exposures to diacetyl, a primary ingredient of butter flavoring, have been shown to cause respiratory disease among workers who mix flavorings. This study focused on evaluating ventilation controls designed to reduce emissions from the flavor mixing tanks, the major source of diacetyl in the plants. Five exhaust hood configurations were evaluated in the laboratory: standard hinged lid-opened, standard hinged lid-closed, hinged lid-slotted, dome with 38-mm gap, and dome with 114-mm gap. Tracer gas tests were performed to evaluate quantitative capture efficiency for each hood. A perforated copper coil was used to simulate an area source within the 1.2-meter diameter mixing tank. Capture efficiencies were measured at four hood exhaust flow rates (2.83, 5.66, 11.3, and 17.0 cubic meters per minute) and three cross draft velocities (0, 30, and 60 meters per minute). All hoods evaluated performed well with capture efficiencies above 90% for most combinations of exhaust volume and cross drafts. The standard hinged lid was the least expensive to manufacture and had the best average capture efficiency (over 99%) in the closed configuration for all exhaust flow rates and cross drafts. The hinged lid-slotted hood had some of the lowest capture efficiencies at the low exhaust flow rates compared to the other hood designs. The standard hinged lid performed well, even in the open position, and it provided a flexible approach to controlling emissions from mixing tanks. The dome hood gave results comparable to the standard hinged lid but it is more expensive to manufacture. The results of the study indicate that emissions from mixing tanks used in the production of flavorings can be controlled using simple inexpensive exhaust hoods. PMID:24649880

Petrographic and geochemical investigation of magma chamber processes beneath small Quaternary volcanic centers between Mt. Jefferson and Mt. Hood volcanoes, Cascade Range Volcanic Arc

NASA Astrophysics Data System (ADS)

Cunningham, E.; Cribb, J. W.

2017-12-01

The northern Oregon Cascade Range has been dominated by andesite to rhyodacite lavas at both Mt. Jefferson (Conrey, 1991) and at Mt. Hood (Cribb and Barton, 1996) during the Quaternary period. Eruptive sequences at both Mt. Hood and Mt. Jefferson have been attributed to open-system mama mixing (Kent et al., 2010) (Ferrell et al., 2015), and the narrow range of lavas erupted at both centers has been derived from repeated cycles of magma mixing-fractionation (Cribb and Barton, 1996). This research examines major and trace element geochemistry as well as the petrographic characteristics of Clear Lake Butte (CLB), Pinhead Butte (PB), and Olallie Butte (OB), all of which are located between Mt. Hood and Mt. Jefferson, and have ben active in the Quaternary period. The research investigates whether the same type of open-system magma mixing known to have occurred at Mt. Hood and Mt. Jefferson has also occurred at CLB, PB, or OB, or whether those systems were closed to mixing and dominated by fractional crystallization. One of the main goals of this project is to highlight the similarities and differences exhibited by neighboring magmatic systems of similar age, but different scale. Disequilibrium textures observed in thin sections from CLB, OB, and PB suggest open-system magma mixing is likely occurring beneath all three buttes. This petrographic evidence includes plagioclase and pyroxene zoning, embayed margins, sieving, and reaction rims. Major element oxide trends at all three buttes are consistent with fractional crystallization, but show narrow concentrations and non-overlapping compositions between PB, CLB, and OB. All three buttes are characterized by narrow ranges of incompatible and compatible trace element concentrations. CLB, PB, and OB all exhibit LREE enrichment and lack significant HFSE depletions, with PB exhibiting greatest enrichment in REE.

CHARACTERIZATION OF PARTICULATE MATTER EMISSION FROM OPEN BURNING OF RICE STRAW

PubMed Central

Oanh, Nguyen Thi Kim; Bich, Thuy Ly; Tipayarom, Danutawat; Manadhar, Bhai R.; Prapat, Pongkiatkul; Simpson, Christopher D.; Liu, L-J Sally

2010-01-01

Emission from field burning of crop residue, a common practice in many parts of the world today, has potential effects on air quality, atmosphere and climate. This study provides a comprehensive size and compositional characterization of particulate matter (PM) emission from rice straw (RS) burning using both in situ experiments (11 spread field burning) and laboratory hood experiments (3 pile and 6 spread burning) that were conducted during 2003–2006 in Thailand. The carbon balance and emission ratio method was used to determine PM emission factors (EF) in the field experiments. The obtained EFs varied from field to hood experiments reflecting multiple factors affecting combustion and emission. In the hood experiments, EFs were found to be depending on the burning types (spread or pile), moisture content and the combustion efficiency. In addition, in the field experiments, burning rate and EF were also influenced by weather conditions, i.e. wind. Hood pile burning produced significantly higher EF (20±8 g kg−1 RS) than hood spread burning (4.7±2.2 g kg−1 RS). The majority of PM emitted from the field burning was PM2.5 with EF of 5.1±0.7 g m−2 or 8.3±2.7 g kg−1 RS burned. The coarse PM fraction (PM10-2.5) was mainly generated by fire attention activities and was relatively small, hence the resulting EF of PM10 (9.4±3.5 g kg−1 RS) was not significantly higher than PM2.5. PM size distribution was measured across 8 size ranges (from <0.4 μm to >9.0 μm). The largest fractions of PM, EC and OC were associated with PM1.1. The most significant components in PM2.5 and PM10 include OC, water soluble ions and levoglucosan. Relative abundance of some methoxyphenols (e.g., acetylsyringone), PAHs (e.g., fluoranthene and pyrene), organochlorine pesticides and PCBs may also serve as additional signatures for the PM emission. Presence of these toxic compounds in PM of burning smoke increases the potential toxic effects of the emission. For illustration, an estimation of the annual RS field burning in Thailand was made using the obtained in situ field burning EFs and preliminary burning activity data. PMID:21243095

"Always the Outlaw": The Potential for Subversion of the Metanarrative in Retellings of Robin Hood

ERIC Educational Resources Information Center

Gates, Geoffrey

2006-01-01

This paper examines six recent retellings of Robin Hood and concentrates on the representation of class, religion and gender in the texts. The question is asked: "what values do the texts implicitly or explicitly arm?" The idea that Robin Hood retellings are systematic of a socially and politically conservative ideology is interrogated by…

Additional Studies on Clothing Treatments for Personal Protection against Biting Flies

DTIC Science & Technology

1979-09-01

length Jackets with attached hoods, the separate hoods were made of mesh fabric consisting of polyester filaments that give some abrasion resistance and...conditions was carried out using a sling psychrometer and anemometer to give data on dry-bulb temperature, relative humidity and wind speed. Insect specimens...treated the experimental items. Mrs. J. Whalen made the Jackets and hoods. UNCLASSIFIED

75 FR 1706 - Regulated Navigation Area; U.S. Navy Submarines, Hood Canal, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-13

... area (RNA) covering the Hood Canal in Washington that will be in effect whenever any U.S. Navy submarine is operating in the Hood Canal and being escorted by the Coast Guard. The RNA is necessary to help... public in general. The RNA will do so by requiring all persons and vessels located within the RNA to...

Rupture of the extensor hood of the fifth toe: a rare injury.

PubMed

Venturini, Sara; Gaba, Suchi; Mangwani, Jitendra

2017-02-27

Closed injuries of the extensor hood of the lesser toes are rare and seldom reported in the literature. We present the case of a woman aged 25 years who presented to the orthopaedic fracture clinic with a 2-week history of pain in the left fifth toe and inability to extend following a ballet dancing session. Investigations showed no fracture on plain radiographs, but an ultrasound scan demonstrated rupture to the extensor hood of the little toe. Successful surgical repair of the extensor hood was performed, and the patient made a good recovery with return to dancing activities. 2017 BMJ Publishing Group Ltd.

Mass transfer inside a flux hood for the sampling of gaseous emissions from liquid surfaces - Experimental assessment and emission rate rescaling

NASA Astrophysics Data System (ADS)

Prata, Ademir A.; Lucernoni, Federico; Santos, Jane M.; Capelli, Laura; Sironi, Selena; Le-Minh, Nhat; Stuetz, Richard M.

2018-04-01

This study assesses the mass transfer of compounds inside the US EPA flux hood, one of the enclosure devices most commonly employed for the direct measurement of atmospheric emissions from liquid surfaces in wastewater treatment plants (WWTPs). Experiments comprised the evaporation of water and the volatilisation of a range of volatile organic compounds (VOCs). Special attention was given to the evaluation of the mass transfer coefficients in the microenvironment created by the flux hood and the effects of concentration build up in the hood's headspace. The VOCs emission rates and the water evaporation rates generally increased with the sweep air flow rate, as did the mass transfer coefficients for all compounds. The emission of compounds whose volatilisation is significantly influenced by the gas phase was greatly affected by concentration build up, whereas this effect was not significant for liquid phase-controlled compounds. The gas-film mass transfer coefficient (kG) estimated inside the US EPA flux hood was of the same order as the respective kG reported in the literature for wind tunnel-type devices, but the emission rates measured by the flux hood can be expected to be lower, due to the concentration build-up. Compared against an emission model for the passive surfaces in WWTPs, the mass transfer of acetic acid (representing a gas phase-dominated compound) inside the US EPA flux hood was equivalent to conditions of wind speeds at 10 m height (U10) of 0.27, 0.51 and 0.99 m s-1, respectively, for sweep air flow rates of 2, 5 and 10 L min-1. On the other hand, for higher wind speeds, the emission rates of gas phase-controlled compounds obtained with the flux hood can be considerably underestimated: for instance, at U10 = 5 m s-1, the emission rates of acetic acid inside the flux hood would be approximately 23, 12 and 6 times lower than the emission rates in the field, for sweep air flow rates of 2, 5 and 10 L min-1, respectively. A procedure is presented in order to scale the emission rates of these compounds measured with the flux hood to field conditions of higher winds.

Identification of a Major Locus Contributing to Erythrocyte 2,3-Diphosphoglycerate Variability in Hooded (Long-Evans) Rats

PubMed Central

Noble, N. A.; Brewer, G. J.

1977-01-01

The erythrocyte glycolytic intermediate 2,3-diphosphoglycerate (DPG) and adenosine triphosphate (ATP) play an important role in oxygen transport and delivery by binding to hemoglobin (Hb) and reducing its affinity for oxygen. Considerable quantitative variability in the levels of DPG and ATP exists in human populations and in a population of hooded (Long-Evans) rats we have studied. This paper presents the results of studies on the genetic component of DPG-level variation in an outbred population of hooded rats. Beginning with about 100 rats, a two-way selection experiment was initiated. Pairs of rats with the highest DPG levels were mated to produce a High-DPG rat strain and animals with the lowest DPG levels were mated to produce a Low-DPG strain. Mean DPG levels responded rapidly to selection and, from generation 3 on, the differences between strain means were highly significant. Ten High-DPG strain rats were intercrossed with 10 Low-DPG strain rats of generation 10 to produce an F1 generation in which the DPG levels were almost as high as those of High-DPG animals. This indicates partial dominance of High-DPG alleles. The F2 DPG-level distribution showed two distinct subpopulations. The high DPG subpopulation contained three times as many animals as the low DPG subpopulation. From these results and the statistical analyses performed, it was concluded that the DPG differences between strains were due to an allelic difference at one major locus, the allele carried by the High-DPG strain showing partial dominance over the allele carried by the Low-DPG strain. It appears that this locus may also effect ATP levels to a large extent and is polymorphic in hooded rat populations. Identification of this locus gives us a useful tool for studies of the physiological effects of DPG variability, as well as providing an example of a major gene effect in a quantitatively varying trait. PMID:863239

Seismicity of Cascade Volcanoes: Characterization and Comparison

NASA Astrophysics Data System (ADS)

Thelen, W. A.

2016-12-01

Here we summarize and compare the seismicity around each of the Very High Threat Volcanoes of the Cascade Range of Washington, Oregon and California as defined by the National Volcanic Early Warning System (NVEWS) threat assessment (Ewert et al., 2005). Understanding the background seismic activity and processes controlling it is critical for assessing changes in seismicity and their implications for volcanic hazards. Comparing seismicity at different volcanic centers can help determine what critical factors or processes affect the observed seismic behavior. Of the ten Very High Threat Volcanoes in the Cascade Range, five volcanoes are consistently seismogenic when considering earthquakes within 10 km of the volcanic center or caldera edge (Mount Rainier, Mount St. Helens, Mount Hood, Newberry Caldera, Lassen Volcanic Center). Other Very High Threat volcanoes (South Sister, Mount Baker, Glacier Peak, Crater Lake and Mount Shasta) have comparatively low rates of seismicity and not enough recorded earthquakes to calculate catalog statistics. Using a swarm definition of 3 or more earthquakes occurring in a day with magnitudes above the largest of the network's magnitude of completenesses (M 0.9), we find that Lassen Volcanic Center is the "swarmiest" in terms of percent of seismicity occurring in swarms, followed by Mount Hood, Mount St. Helens and Rainier. The predominance of swarms at Mount Hood may be overstated, as much of the seismicity is occurring on surrounding crustal faults (Jones and Malone, 2005). Newberry Caldera has a relatively short record of seismicity since the permanent network was installed in 2011, however there have been no swarms detected as defined here. Future work will include developing discriminates for volcanic versus tectonic seismicity to better filter the seismic catalog and more precise binning of depths at some volcanoes so that we may better consider different processes. Ewert J. W., Guffanti, M. and Murray, T. L. (2005). An Assessment of Volcanic Threat and Monitoring Capabilities in the United States: Framework for a National Volcano Early Warning System, USGS Open File Report 2005-1164, 62 pp. Jones, J., & Malone, S. D. (2005). Mount hood earthquake activity: Volcanic or tectonic origins? Bulletin Of The Seismological Society Of America, 95(3), 818-832.

Thermal protective uniforms and hoods: impact of design modifications and water content on burn prevention in New York City firefighters: laboratory and field results

PubMed Central

Prezant, D; Malley, K; Barker, R; Guerth, C; Kelly, K

2001-01-01

Objectives—To determine (1) the effectiveness of hoods in reducing head burns, (2) the impact of clothes worn under the protective outer uniform (modern = long sleeve shirt and long pants; modified modern = short sleeve T-shirt and short pants) on burns, and (3) whether water content (dry, damp or saturated) affects the level of thermal protection. Setting—Fire Department of the City of New York (FDNY). Methods—Laboratory tests (fully dressed manikin) evaluated the different uniform and water conditions when exposed to an average 24 cal/cm2 heat flux, approximately 2250°F air temperature. FDNY field results compared (1) head burns during winters wearing the hood to winters without hood and (2) upper and lower extremity burns during summers wearing traditional, modern, and modified modern uniforms. Results—Laboratory tests showed that thermal protection was: (1) dramatically improved by the hood with protection increasing as water content increased and (2) not significantly different between modern and modified modern uniforms, regardless of water content. FDNY field results confirmed these tests showing (1) significant decreases in neck burns (by 54%), ear burns (by 60%), and head burn totals (by 46%) wearing the hood and (2) no significant differences in upper or lower extremity burns wearing modern compared with modified modern uniforms. Conclusions—Based on combined laboratory and field results, we strongly recommend the use of modern thermal protective hoods and the modified modern uniform. PMID:11565971

Hooded Warbler Nesting Success Adjacent to Group-selection and Clearcut Edges in a Southeastern Bottomland Forest

Treesearch

Christopher E. Moorman; David C. Guynn; John C. Kilgo

2002-01-01

During the 1996, 1997, and 199X breeding seasons, WC located and monitored Hooded Warbler (Wilsonia citrina) nests in a bottomland forest and examined the effects of edge proximity, edge type, and nest-site vegetation on nesting success. SW- cessful Hooded Warbler nests were more concealed from below and were located in nest patches with a greater...

Red tree voles in the Columbia River Gorge and Hood River basin, Oregon

Treesearch

Eric D. Forsman; James K. Swingle; Michael A. McDonald; Scott A. Graham; Nicholas R. Hatch

2009-01-01

In 2003 to 2008, we conducted surveys to document the eastern and northern range limits of red tree voles (Arborimus longicaudus) in the Columbia River Gorge and Hood River basin, Oregon. Our survey indicated the current range of the vole includes the area from Wahkeena Creek, 20 km east of Troutdale to Seneca Fouts State Park, 6 km west of Hood...

Implementation of Leak Test Methods for the International Space Station (ISS) Elements, Systems and Components

NASA Technical Reports Server (NTRS)

Underwood, Steve; Lvovsky, Oleg

2007-01-01

The International Space Station (ISS has Qualification and Acceptance Environmental Test Requirements document, SSP 41172 that includes many environmental tests such as Thermal vacuum & Cycling, Depress/Repress, Sinusoidal, Random, and Acoustic Vibration, Pyro Shock, Acceleration, Humidity, Pressure, Electromatic Interference (EMI)/Electromagnetic Compatibility (EMCO), etc. This document also includes (13) leak test methods for Pressure Integrity Verification of the ISS Elements, Systems, and Components. These leak test methods are well known, however, the test procedure for specific leak test method shall be written and implemented paying attention to the important procedural steps/details that, if omitted or deviated, could impact the quality of the final product and affect the crew safety. Such procedural steps/details for different methods include, but not limited to: - Sequence of testing, f or example, pressurization and submersion steps for Method I (Immersion); - Stabilization of the mass spectrometer leak detector outputs fo r Method II (vacuum Chamber or Bell jar); - Proper data processing an d taking a conservative approach while making predictions for on-orbit leakage rate for Method III(Pressure Change); - Proper Calibration o f the mass spectrometer leak detector for all the tracer gas (mostly Helium) Methods such as Method V (Detector Probe), Method VI (Hood), Method VII (Tracer Probe), Method VIII(Accumulation); - Usage of visibl ility aides for Method I (Immersion), Method IV (Chemical Indicator), Method XII (Foam/Liquid Application), and Method XIII (Hydrostatic/Visual Inspection); While some methods could be used for the total leaka ge (either internal-to-external or external-to-internal) rate requirement verification (Vacuum Chamber, Pressure Decay, Hood, Accumulation), other methods shall be used only as a pass/fail test for individual joints (e.g., welds, fittings, and plugs) or for troubleshooting purposes (Chemical Indicator, Detector Probe, Tracer Probe, Local Vacuum Chamber, Foam/Liquid Application, and Hydrostatic/Visual Inspection). Any isolation of SSP 41172 requirements have led to either retesting of hardware or accepting a risk associated with the potential system or component pressure integrity problem during flight.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Taiping; Yang, Zhaoqing

Increased eutrophication and degraded water quality in estuarine and coastal waters have been a worldwide environmental concern. While it is commonly accepted that anthropogenic impact plays a major role in many emerging water quality issues, natural conditions such as restricted water circulations controlled by geometry may also substantially contribute to unfavorable water quality in certain ecosystems. To elucidate the contributions from different factors, a hydrodynamic-water quality model that integrates both physical transport and pollutant loadings is particularly warranted. A preliminary modeling study using the Environmental Fluid Dynamic Code (EFDC) is conducted to investigate hydrodynamic circulation and low dissolved oxygen (DO)more » in Hood Canal, a representative fjord in the U.S. Pacific Northwest. Because the water quality modeling work is still ongoing, this paper focuses on the progress in hydrodynamic modeling component. The hydrodynamic model has been set up using the publicly available forcing data and was calibrated against field observations or NOAA predictions for tidal elevation, current, salinity and temperature. The calibrated model was also used to estimate physical transport timescales such as residence time in the estuary. The preliminary model results demonstrate that the EFDC Hood Canal model is capable of capturing the general circulation patterns in Hood Canal, including weak tidal current and strong vertical stratification. The long residence time (i.e., on the order of 100 days for the entire estuary) also indicates that restricted water circulation could contribute to low DO in the estuary and also makes the system especially susceptible to anthropogenic disturbance, such as excess nutrient input.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solana, Amy E.; Warwick, William M.; Orrell, Alice C.

This report presents the results of Pacific Northwest National Laboratory's (PNNL) follow-on renewable energy (RE) assessment of Fort Hood. Fort Hood receives many solicitations from renewable energy vendors who are interested in doing projects on site. Based on specific requests from Fort Hood staff so they can better understand these proposals, and the results of PNNL's 2008 RE assessment of Fort Hood, the following resources were examined in this assessment: (1) Municipal solid waste (MSW) for waste-to-energy (WTE); (2) Wind; (3) Landfill gas; (4) Solar photovoltaics (PV); and (5) Shale gas. This report also examines the regulatory issues, development options,more » and environmental impacts for the promising RE resources, and includes a review of the RE market in Texas.« less

Use of CFD for static sampling hood design: An example for methane flux assessment on landfill surfaces.

PubMed

Lucernoni, Federico; Rizzotto, Matteo; Tapparo, Federica; Capelli, Laura; Sironi, Selena; Busini, Valentina

2016-11-01

The work focuses on the principles for the design of a specific static hood and on the definition of an optimal sampling procedure for the assessment of landfill gas (LFG) surface emissions. This is carried out by means of computational fluid dynamics (CFD) simulations to investigate the fluid dynamics conditions of the hood. The study proves that understanding the fluid dynamic conditions is fundamental in order to understand the sampling results and correctly interpret the measured concentration values by relating them to a suitable LFG emission model, and therefore to estimate emission rates. For this reason, CFD is a useful tool for the design and evaluation of sampling systems, among others, to verify the fundamental hypotheses on which the mass balance for the sampling hood is defined. The procedure here discussed, which is specific for the case of the investigated landfill, can be generalized to be applied also to different scenarios, where hood sampling is involved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Performance of Particulate Containment at Nanotechnology Workplaces

PubMed Central

Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

2015-01-01

The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These controls assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37% reduction on the particle concentration in the worker’s breathing zone, and produce a 42% lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15%–20% higher ultrafine (<500 nm) particle concentrations at the source and at the worker’s breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored. PMID:26705393

Beyond 2001: a silvicultural odyssey to sustaining terrestrial and aquatic ecosystems? Proceedings of the 2001 national silviculture workshop, May 6-10, Hood River, Oregon.

Treesearch

Sharon Parker; Susan Stevens Hummel

2002-01-01

The 2001 National Silviculture Workshop was held in Hood River, Oregon, and hosted by the Mt. Hood National Forest, the Gifford Pinchot National Forest, and the Pacific Northwest Research Station. The Washington Office Vegetation Management and Protection Research and Forest and Grassland staffs are ongoing sponsors of the biennial workshop, which began in 1973 in...

Reduction of exposure to ultrafine particles by kitchen exhaust hoods: the effects of exhaust flow rates, particle size, and burner position.

PubMed

Rim, Donghyun; Wallace, Lance; Nabinger, Steven; Persily, Andrew

2012-08-15

Cooking stoves, both gas and electric, are one of the strongest and most common sources of ultrafine particles (UFP) in homes. UFP have been shown to be associated with adverse health effects such as DNA damage and respiratory and cardiovascular diseases. This study investigates the effectiveness of kitchen exhaust hoods in reducing indoor levels of UFP emitted from a gas stove and oven. Measurements in an unoccupied manufactured house monitored size-resolved UFP (2 nm to 100 nm) concentrations from the gas stove and oven while varying range hood flow rate and burner position. The air change rate in the building was measured continuously based on the decay of a tracer gas (sulfur hexafluoride, SF(6)). The results show that range hood flow rate and burner position (front vs. rear) can have strong effects on the reduction of indoor levels of UFP released from the stove and oven, subsequently reducing occupant exposure to UFP. Higher range hood flow rates are generally more effective for UFP reduction, though the reduction varies with particle diameter. The influence of the range hood exhaust is larger for the back burner than for the front burner. The number-weighted particle reductions for range hood flow rates varying between 100 m(3)/h and 680 m(3)/h range from 31% to 94% for the front burner, from 54% to 98% for the back burner, and from 39% to 96% for the oven. Copyright © 2012 Elsevier B.V. All rights reserved.

Orthogonal design on range hood with air curtain and its effects on kitchen environment.

PubMed

Liu, Xiaomin; Wang, Xing; Xi, Guang

2014-01-01

Conventional range hoods cannot effectively prevent the oil fumes containing cooking-induced harmful material from escaping into the kitchen Air curtains and guide plates have been used in range hoods to reduce the escape of airborne emissions and heat, thereby improving the kitchen environment and the cook's degree of comfort. In this article, numerical simulations are used to study the effects of the jet velocity of an air curtain, the jet angle of the air curtain, the width of the jet slot, the area of the guide plate, and the exhaust rate of the range hood on the perceived temperature, the perceived concentration of oil fumes, the release temperature of oil fumes, and the concentration of escaped oil fumes in a kitchen. The orthogonal experiment results show that the exhaust rate of the range hood is the main factor influencing the fumes concentration and the temperature distribution in the kitchen. For the range hood examined in the present study, the optimum values of the exhaust rate, the jet velocity of the air curtain, the jet angle of the air curtain, the width of the jet slot, and the area of the guide plate are 10.5 m(3)/min, 1.5 m/s, -5°, 4 mm, and 0.22 m(2), respectively, based on the results of the parametric study. In addition, the velocity field, temperature field, and oil fumes concentration field in the kitchen using the proposed range hood with the air curtain and guide plate are analyzed for those parameters. The study's results provide significant information needed for improving the kitchen environment.

Strategic Plan Outline for the Army Utilities Modernization Program: Fiscal Years 2008-2013

DTIC Science & Technology

2006-11-01

Components of electrical demand at Fort Hood, TX........................................................109 C6 Schematics of conventional and TES cooling...feasible, should be provided to the maximum extent possible. Consideration should be given not only to conventional fuels (e.g., natural gas, propane...are lower than those of “ conventional ” units. In successful installations of CHP, the price reduction is in the range of 20-30 percent. It also

Hood River and Pelton Ladder Evaluation Studies : Annual Report 1994.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Erik A.; French, Rod A.; Ritchey, Alan D.

1995-09-01

In 1992, the Northwest Power Planning Council approved the Hood River and Pelton ladder master plans within the framework of the Columbia River Basin Fish and Wildlife Program. The master plans define an approach for implementing a hatchery supplementation program in the Hood River subbasin. The hatchery program as defined in the master plans is called the Hood River Hatchery Production Program (HRPP). The HRPP will be phased in over several years and will be jointly implemented by the Oregon Department of Fish and Wildlife (ODFW) and the Confederated Tribes of the Warm Springs (CTWS) Reservation. In December 1991, amore » monitoring and evaluation program was implemented in the Hood River subbasin to collect life history and production information on stocks of anadromous salmonids returning to the Hood River subbasin. The program was implemented to provide the baseline information needed to: (1) evaluate various management options for implementing the HRPP and (2) determine any post-project impacts the HRPP has on indigenous populations of resident fish. Information collected during the 1992-94 fiscal years will also be used to prepare an environmental impact statement (EIS) evaluating the program`s impact on the human environment. To begin construction on project facilities, it was proposed that the HRPP be implemented in two phases. Phase I would include work that would fall under a {open_quotes}categorical exclusion{close_quotes} from NEPA, and Phase II would include work requiring an EIS prior to implementation. This report summarizes the life history and escapement data collected in the Hood River subbasin and the status work of implemented under Phase I of the HR Life history and escapement data will be used to: (1) test the assumptions on which harvest and escapement goals for the Hood River and Pelton ladder master plans are based and (2) develop biologically based management recommendations for implementing the HRPP.« less

Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods subject to influence from cross draft.

PubMed

Chen, Jia-Kun; Huang, Rong Fung; Peng, Kuan-Lin

2012-01-01

The effects of draft on the flow and spillage characteristics of wall-mounted and jet-isolated range hoods were investigated. A specially designed draft generator that could supply low-swirl air current was used to provide "cross draft" from three directions, lateral (θ = 0(o)), oblique (θ = 45(o)), and front (θ = 90(o)), with respect to the center point of the range hoods. Flow characteristics of oil mist were inspected through visualization of smoke flows with light scattering (laser light sheet-assisted visualization of smoke flow). The leakage mechanisms, which were closely related to the flow features, were studied by examining both movies and still pictures showing smoke-flow evolution. The sulfur hexafluoride tracer gas concentration detection method was employed to measure the capture indices. The results showed that the lateral draft pushed the pollutants generated under the hood in the opposite direction and induced serious spillage. The oblique draft pushed the pollutants toward both the rear wall and opposite side and induced more serious spillage than did the lateral draft. The frontal draft forced the pollutants to bifurcate into streams moving toward the left and the right, and induced the most serious pollutant spillage among the three tested drafts. Pollutant spillage became critically significant as the cross draft velocity was increased to greater than 0.2 m/sec. Spillage of pollutants increased as the velocity of the cross draft was increased. Increasing the suction flow rate of the range hood may increase resistance to the draft, but the benefits were limited at draft velocities greater than 0.2 m/sec. Both range hoods had a similarly low capture index under the influence of the lateral draft. For the oblique and frontal drafts, the jet-isolated range hood demonstrated a higher capture index than did the wall-mounted range hood.

Northwest Forest Plan—the first 10 years (1994–2003): socioeconomic monitoring of the Mount Hood National Forest and three local communities.

Treesearch

William M. Kay; Ellen M. Donoghue; Susan Charnley; Cassandra. Moseley

2007-01-01

This report examines socioeconomic changes that took place between 1990 and 2003 on and around lands managed by the Mount Hood National Forest in Oregon to assess the effects of the Northwest Forest Plan (the Plan) on rural economies and communities there. Three case communities were studied: the Greater Estacada Area, the Upper Hood River Valley, and the Villages of...

How the Cobra Got Its Flesh-Eating Venom: Cytotoxicity as a Defensive Innovation and Its Co-Evolution with Hooding, Aposematic Marking, and Spitting

PubMed Central

Panagides, Nadya; Jackson, Timothy N.W.; Ikonomopoulou, Maria P.; Arbuckle, Kevin; Pretzler, Rudolf; Yang, Daryl C.; Ali, Syed A.; Koludarov, Ivan; Dobson, James; Sanker, Brittany; Asselin, Angelique; Santana, Renan C.; Hendrikx, Iwan; van der Ploeg, Harold; Tai-A-Pin, Jeremie; van den Bergh, Romilly; Kerkkamp, Harald M.I.; Vonk, Freek J.; Naude, Arno; Strydom, Morné A.; Jacobsz, Louis; Dunstan, Nathan; Jaeger, Marc; Hodgson, Wayne C.; Miles, John; Fry, Bryan G.

2017-01-01

The cytotoxicity of the venom of 25 species of Old World elapid snake was tested and compared with the morphological and behavioural adaptations of hooding and spitting. We determined that, contrary to previous assumptions, the venoms of spitting species are not consistently more cytotoxic than those of closely related non-spitting species. While this correlation between spitting and non-spitting was found among African cobras, it was not present among Asian cobras. On the other hand, a consistent positive correlation was observed between cytotoxicity and utilisation of the defensive hooding display that cobras are famous for. Hooding and spitting are widely regarded as defensive adaptations, but it has hitherto been uncertain whether cytotoxicity serves a defensive purpose or is somehow useful in prey subjugation. The results of this study suggest that cytotoxicity evolved primarily as a defensive innovation and that it has co-evolved twice alongside hooding behavior: once in the Hemachatus + Naja and again independently in the king cobras (Ophiophagus). There was a significant increase of cytotoxicity in the Asian Naja linked to the evolution of bold aposematic hood markings, reinforcing the link between hooding and the evolution of defensive cytotoxic venoms. In parallel, lineages with increased cytotoxicity but lacking bold hood patterns evolved aposematic markers in the form of high contrast body banding. The results also indicate that, secondary to the evolution of venom rich in cytotoxins, spitting has evolved three times independently: once within the African Naja, once within the Asian Naja, and once in the Hemachatus genus. The evolution of cytotoxic venom thus appears to facilitate the evolution of defensive spitting behaviour. In contrast, a secondary loss of cytotoxicity and reduction of the hood occurred in the water cobra Naja annulata, which possesses streamlined neurotoxic venom similar to that of other aquatic elapid snakes (e.g., hydrophiine sea snakes). The results of this study make an important contribution to our growing understanding of the selection pressures shaping the evolution of snake venom and its constituent toxins. The data also aid in elucidating the relationship between these selection pressures and the medical impact of human snakebite in the developing world, as cytotoxic cobras cause considerable morbidity including loss-of-function injuries that result in economic and social burdens in the tropics of Asia and sub-Saharan Africa. PMID:28335411

The Influence of Inlet Asymmetry on Steam Turbine Exhaust Hood Flows.

PubMed

Burton, Zoe; Hogg, Simon; Ingram, Grant L

2014-04-01

It has been widely recognized for some decades that it is essential to accurately represent the strong coupling between the last stage blades (LSB) and the diffuser inlet, in order to correctly capture the flow through the exhaust hoods of steam turbine low pressure cylinders. This applies to any form of simulation of the flow, i.e., numerical or experimental. The exhaust hood flow structure is highly three-dimensional and appropriate coupling will enable the important influence of this asymmetry to be transferred to the rotor. This, however, presents challenges as the calculation size grows rapidly when the full annulus is calculated. The size of the simulation means researchers are constantly searching for methods to reduce the computational effort without compromising solution accuracy. However, this can result in excessive computational demands in numerical simulations. Unsteady full-annulus CFD calculation will remain infeasible for routine design calculations for the foreseeable future. More computationally efficient methods for coupling the unsteady rotor flow to the hood flow are required that bring computational expense within realizable limits while still maintaining sufficient accuracy for meaningful design calculations. Research activity in this area is focused on developing new methods and techniques to improve accuracy and reduce computational expense. A novel approach for coupling the turbine last stage to the exhaust hood employing the nonlinear harmonic (NLH) method is presented in this paper. The generic, IP free, exhaust hood and last stage blade geometries from Burton et al. (2012. "A Generic Low Pressure Exhaust Diffuser for Steam Turbine Research,"Proceedings of the ASME Turbo Expo, Copenhagen, Denmark, Paper No. GT2012-68485) that are representative of modern designs, are used to demonstrate the effectiveness of the method. This is achieved by comparing results obtained with the NLH to those obtained with a more conventional mixing-plane approach. The results show that the circumferential asymmetry can be successfully transferred in both directions between the exhaust hood flow and that through the LSB, by using the NLH. This paper also suggests that for exhaust hoods of generous axial length, little change in C p is observed when the circumferential asymmetry is captured. However, the predicted flow structure is significantly different, which will influence the design and placement of the exhaust hood internal "furniture."

How the Cobra Got Its Flesh-Eating Venom: Cytotoxicity as a Defensive Innovation and Its Co-Evolution with Hooding, Aposematic Marking, and Spitting.

PubMed

Panagides, Nadya; Jackson, Timothy N W; Ikonomopoulou, Maria P; Arbuckle, Kevin; Pretzler, Rudolf; Yang, Daryl C; Ali, Syed A; Koludarov, Ivan; Dobson, James; Sanker, Brittany; Asselin, Angelique; Santana, Renan C; Hendrikx, Iwan; van der Ploeg, Harold; Tai-A-Pin, Jeremie; van den Bergh, Romilly; Kerkkamp, Harald M I; Vonk, Freek J; Naude, Arno; Strydom, Morné A; Jacobsz, Louis; Dunstan, Nathan; Jaeger, Marc; Hodgson, Wayne C; Miles, John; Fry, Bryan G

2017-03-13

The cytotoxicity of the venom of 25 species of Old World elapid snake was tested and compared with the morphological and behavioural adaptations of hooding and spitting. We determined that, contrary to previous assumptions, the venoms of spitting species are not consistently more cytotoxic than those of closely related non-spitting species. While this correlation between spitting and non-spitting was found among African cobras, it was not present among Asian cobras. On the other hand, a consistent positive correlation was observed between cytotoxicity and utilisation of the defensive hooding display that cobras are famous for. Hooding and spitting are widely regarded as defensive adaptations, but it has hitherto been uncertain whether cytotoxicity serves a defensive purpose or is somehow useful in prey subjugation. The results of this study suggest that cytotoxicity evolved primarily as a defensive innovation and that it has co-evolved twice alongside hooding behavior: once in the Hemachatus + Naja and again independently in the king cobras ( Ophiophagus ). There was a significant increase of cytotoxicity in the Asian Naja linked to the evolution of bold aposematic hood markings, reinforcing the link between hooding and the evolution of defensive cytotoxic venoms. In parallel, lineages with increased cytotoxicity but lacking bold hood patterns evolved aposematic markers in the form of high contrast body banding. The results also indicate that, secondary to the evolution of venom rich in cytotoxins, spitting has evolved three times independently: once within the African Naja , once within the Asian Naja , and once in the Hemachatus genus. The evolution of cytotoxic venom thus appears to facilitate the evolution of defensive spitting behaviour. In contrast, a secondary loss of cytotoxicity and reduction of the hood occurred in the water cobra Naja annulata , which possesses streamlined neurotoxic venom similar to that of other aquatic elapid snakes (e.g., hydrophiine sea snakes). The results of this study make an important contribution to our growing understanding of the selection pressures shaping the evolution of snake venom and its constituent toxins. The data also aid in elucidating the relationship between these selection pressures and the medical impact of human snakebite in the developing world, as cytotoxic cobras cause considerable morbidity including loss-of-function injuries that result in economic and social burdens in the tropics of Asia and sub-Saharan Africa.

Hood River Production Program Monitoring and Evaluation (M&E) - Confederated Tribes of Warm Springs : Annual Report For Fiscal Year, October 2007 – September 2008.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerstenberger, Ryan

2009-07-27

This progress report describes work performed by the Confederated Tribes of Warm Springs (CTWSRO) portion of the Hood River Production Program Monitoring and Evaluation Project (HRPP) during the 2008 fiscal year. A total of 64,736 hatchery winter steelhead, 12,108 hatchery summer steelhead, and 68,426 hatchery spring Chinook salmon smolts were acclimated and released in the Hood River basin during the spring. The HRPP exceeded program goals for a release of and 50,000 winter steelhead but fell short of the steelhead release goals of 30,000 summer steelhead and 75,000 spring Chinook in 2008. Passive Integrated Transponders (PIT) tags were implanted inmore » 6,652 hatchery winter steelhead, and 1,196 hatchery summer steelhead, to compare migratory attributes and survival rates of hatchery fish released into the Hood River. Water temperatures were recorded at six locations within the Hood River subbasin to monitor for compliance with Oregon Department of Environmental Quality water quality standards. A preseason spring Chinook salmon adult run forecast was generated, which predicted an abundant return adequate to meet escapement goal and brood stock needs. As a result the tribal and sport fisheries were opened. A tribal creel was conducted from May 22 to July 18 during which an estimated 172 spring Chinook were harvested. One hundred sixteen Spring Chinook salmon redds were observed and 72 carcasses were inspected on 19.4 miles of spawning grounds throughout the Hood River Basin during 2008. Annual salvage operations were completed in two irrigation canals resulting in the liberation of 1,641 fish back to the Hood River.« less

Airborne nanoparticle concentrations in the manufacturing of polytetrafluoroethylene (PTFE) apparel.

PubMed

Vosburgh, Donna J H; Boysen, Dane A; Oleson, Jacob J; Peters, Thomas M

2011-03-01

One form of waterproof, breathable apparel is manufactured from polytetrafluoroethylene (PTFE) membrane laminated fabric using a specific process to seal seams that have been sewn with traditional techniques. The sealing process involves applying waterproof tape to the seam by feeding the seam through two rollers while applying hot air (600 °C). This study addressed the potential for exposure to particulate matter from this sealing process by characterizing airborne particles in a facility that produces more than 1000 lightweight PTFE rain jackets per day. Aerosol concentrations throughout the facility were mapped, breathing zone concentrations were measured, and hoods used to ventilate the seam sealing operation were evaluated. The geometric mean (GM) particle number concentrations were substantially greater in the sewing and sealing areas (67,000 and 188,000 particles cm⁻³)) compared with that measured in the office area (12,100 particles cm⁻³). Respirable mass concentrations were negligible throughout the facility (GM = 0.002 mg m⁻³) in the sewing and sealing areas). The particles exiting the final discharge of the facility's ventilation system were dominated by nanoparticles (number median diameter = 25 nm; geometric standard deviation of 1.39). The breathing zone particle number concentrations of the workers who sealed the sewn seams were highly variable and significantly greater when sealing seams than when conducting other tasks (p < 0.0001). The sealing workers' breathing zone concentrations ranged from 147,000 particles cm⁻³ to 798,000 particles cm⁻³, and their seam responsibility significantly influenced their breathing zone concentrations (p = 0.03). The finding that particle number concentrations were approximately equal outside the hood and inside the local exhaust duct indicated poor effectiveness of the canopy hoods used to ventilate sealing operations.

Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel

PubMed Central

Vosburgh, Donna J.H.; Boysen, Dane A.; Oleson, Jacob J.; Peters, Thomas M.

2016-01-01

One form of waterproof, breathable apparel is manufactured from polytetrafluoroethylene (PTFE) membrane laminated fabric, using a specific process to seal seams that have been sewn with traditional techniques. The sealing process involves applying waterproof tape to the seam by feeding the seam through two rollers while applying hot air (600°C). This study addressed the potential for exposure to particulate matter from this sealing process, by characterizing airborne particles in a facility that produces over 1,000 lightweight PTFE rain jackets per day. Aerosol concentrations throughout the facility were mapped, breathing zone concentrations were measured, and hoods used to ventilate the seam sealing operation were evaluated. The geometric mean (GM) particle number concentrations were substantially greater in the sewing and sealing areas (67,000 and 188,000 particles cm−3) compared to that measured in the office area (12,100 particles cm−3). Respirable mass concentrations were negligible throughout the facility (GM=0.002 mg m−3 in the sewing and sealing areas). The particles exiting the final discharge of the facility's ventilation system were dominated by nanoparticles (number median diameter = 25 nm; geometric standard deviation of 1.39). The breathing zone particle number concentrations of the workers who sealed the sewn seams were highly variable and significantly greater when sealing seams than when conducting other tasks (p<0.0001). The sealing workers’ breathing zone concentrations ranged from 147,000 particles cm−3 to 798,000 particles cm−3, and their seam responsibility significantly influenced their breathing zone concentrations (p=0.03). The finding that particle number concentrations were approximately equal outside the hood and inside the local exhaust duct indicated poor effectiveness of the canopy hoods used to ventilate sealing operations. PMID:21347955

Performance of Hoods for Aircraft Exhaust-Gas Turbines

DTIC Science & Technology

1946-11-01

vanes and hood-entrance fairing band at a blade -to- Jet speed ratio of 0.4 and a pressure ratio’ of 2.0. Aircraft Engine Research Laboratory... engine , the gases leave the turbine with an axial velocity of about 700 feet per second. At an airspeed of 375 miles_ per hour, a jet power...importance of providing efficient exhaust hoods for turbine - compressor jet -propulsion engines is even more obvious as all the power of these units is

Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan

PubMed Central

UEGOMORI, Mima; HARAGUCHI, Yuko; OBI, Takeshi; TAKASE, Kozo

2018-01-01

We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes. PMID:29503349

Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan.

PubMed

Uegomori, Mima; Haraguchi, Yuko; Obi, Takeshi; Takase, Kozo

2018-04-18

We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes.

Changes in Physiologic Parameters and Effects of Hooding in Red-tailed Hawks ( Buteo jamaicensis ) During Manual Restraint.

PubMed

Doss, Grayson A; Mans, Christoph

2016-06-01

Manual restraint in birds of prey is required for many veterinary and research procedures. To investigate the effects of handling stress on physiologic parameters in raptorial birds, 8 red-tailed hawks ( Buteo jamaicensis ) were manually restrained over a 15-minute period. Respiratory rate (RR), heart rate (HR), and cloacal temperature were monitored over time and recorded at defined intervals during the experiment. The effect of hooding on physiologic variables was also evaluated in a complete crossover design. Both RR and HR decreased significantly during the 15-minute restraint period (HR, -80 ± 101.4 beats/min [bpm], [P < .01]; RR, -17.5 ± 22.6 breaths/min, [P < .05]). Hooded birds had significantly lower HRs and RRs at 15 minutes of restraint (HR: 232.5 ± 26 bpm, [P < .037]; RR: 33.1 ± 6.7 breaths/min, [P < .05]) compared to birds restrained without a hood (HR: 280 ± 74.1 bpm; RR: 51.5 ± 28.8 breaths/min). Cloacal temperature increased significantly in all manually restrained birds (+2.2 ± 0.7°C, [P < .01]), with a comparable increase in hooded and nonhooded birds. In this study of the effects of manual restraint on red-tailed hawks, hooding versus nonhooding amplified the decrease in HR and RR but had no effect on stress-induced hyperthermia.

Human Engineering Design Criteria for Modern Control/Display Components and Standard Parts.

DTIC Science & Technology

1980-05-01

to identify changes required to achieve the stated program objectives. The effort concentrated or the following factors: " Type and degree of change...greatest viewing angle) other than that actually forming the image ( nonimage brightness); i.e., I BR = n Contrast - The difference in brightness between...placement of the scope relative to the light source, through the use of a hood or shield; by optical coatings or filters over the light source; or by

Archaeological Survey at Fort Hood, Texas Fiscal Years 1991 and 1992: Cantonment and Belton Lake Periphery Areas

DTIC Science & Technology

1993-12-01

is unable to adequately locate rockshelters. Improvement of the elevation data in the Fort Hood GIS would provide better estimates of slope and aspect...rockshelters. Improvement of the elevation data in the Fort Hood GIS would provide better estimates of slope and aspect and might be expected to improve the...could be chosen and used as a control (non-sites). The development of Geographic Information Systems ( GIS ) allows either or both approaches to be

Data Management of Watershed Information and Data Enterprise Repository Implementation at Fort Hood, Texas

DTIC Science & Technology

2003-03-01

is a 20-ft (6.1-m) mast supporting a cell phone antenna and a solar panel. Contained with in the enclosure is a Forest Technology Systems data...logger, a deep cycle battery, a voltage regulator, a cell phone modem, and a Motorola cell phone . The stream level, turbidity, and soil moisture sensors...DOIM) Security Protocols at Fort Hood, computers connected to the Fort Hood network cannot utilize cell phone communication to retrieve the data

Accumulation of PBDEs in stranded harp (Pagophilus groenlandicus) and hooded seals (Cystophora cristata) from the Northeastern United States.

PubMed

Soulen, Brianne K; Venables, Barney J; Johnston, David W; Roberts, Aaron P

2018-07-01

Polybrominated diphenyl ethers (PBDEs) are highly lipophilic components of brominated flame retardants that are environmentally persistent and bioaccumulate. PBDEs are taken up from the gastrointestinal tract and accumulate mainly in fat depots and liver tissues. Seal species inhabiting Arctic and sub-Arctic regions can have upwards of 30% of their body mass composed of blubber. When those blubber stores are mobilized for energy, stored toxicants are also released into circulation. Most studies reporting accumulation of PBDEs in seals have focused on harbor and grey seals with few examining harp and hooded seals. In this study, PBDEs concentrations were analyzed in seal blubber from 21 stranded harp and 9 stranded hooded seals sampled along the northeast coast of the U.S. (1999-2010). A PBDE congener profile was determined for each individual. The results show that both species of seals are accumulating PBDEs with BDE-47 being the dominant congener. Mean ƩPBDE concentrations in harp seals were 70.55 ± 33.59 ng/g ww and for hooded seals 94.28 ± 42.65 ng/g ww. The results of this study are consistent with previous studies reporting a decrease in bioaccumulation with an increase in bromination. For both species, BDE-47 represented the highest percentage of the ƩPBDEs, composing over 50% of the ƩPBDEs in harp seals. When compared to stranding condition code, animals found alive had overall higher PBDE concentrations than those found in a state of moderate decomposition. This difference could be due to decreased blubber levels in the decomposed animals or potential degradation of the compounds in the blubber. Almost all seals used in this study were yearlings which is the most likely age class to strand. Yearling seals are at a crucial stage of development, especially of their immune system, which can be impacted by high levels of contaminants like PBDEs and increase the susceptibility to disease. Copyright © 2018 Elsevier Ltd. All rights reserved.

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., installation and proper operation of primary hoods on all active matte tap holes, matte launders, slag skim..., installation and proper operation of primary hoods on all active slag and lead bullion furnace tap holes and...

Digital Data for Volcano Hazards of the Mount Hood Region, Oregon

USGS Publications Warehouse

Schilling, S.P.; Doelger, S.; Scott, W.E.; Pierson, T.C.; Costa, J.E.; Gardner, C.A.; Vallance, J.W.; Major, J.J.

2008-01-01

Snow-clad Mount Hood dominates the Cascade skyline from the Portland metropolitan area to the wheat fields of Wasco and Sherman Counties. The mountain contributes valuable water, scenic, and recreational resources that help sustain the agricultural and tourist segments of the economies of surrounding cities and counties. Mount Hood is also one of the major volcanoes of the Cascade Range, having erupted repeatedly for hundreds of thousands of years, most recently during two episodes in the past 1,500 yr. The last episode ended shortly before the arrival of Lewis and Clark in 1805. When Mount Hood erupts again, it will severely affect areas on its flanks and far downstream in the major river valleys that head on the volcano. Volcanic ash may fall on areas up to several hundred kilometers downwind. The purpose of the volcano hazard report USGS Open-File Report 97-89 (Scott and others, 1997) is to describe the kinds of hazardous geologic events that have happened at Mount Hood in the past and to show which areas will be at risk when such events occur in the future. This data release contains the geographic information system (GIS) data layers used to produce the Mount Hood volcano hazard map in USGS Open-File Report 97-89. Both proximal and distal hazard zones were delineated by scientists at the Cascades Volcano Observatory and depict various volcano hazard areas around the mountain. A second data layer contains points that indicate estimated travel times of lahars.

Digital data for preliminary geologic map of the Mount Hood 30- by 60-minute quadrangle, northern Cascade Range, Oregon

USGS Publications Warehouse

Lina Ma,; Sherrod, David R.; Scott, William E.

2014-01-01

This geodatabase contains information derived from legacy mapping that was published in 1995 as U.S. Geological Survey Open-File Report 95-219. The main component of this publication is a geologic map database prepared using geographic information system (GIS) applications. Included are pdf files to view or print the map sheet, the accompanying pamphlet from Open-File Report 95-219, and links to the original publication, which is available as scanned files in pdf format.

Building No. 905, showing typical aqua medias or rain hoods ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building No. 905, showing typical aqua medias or rain hoods - Presidio of San Francisco, Enlisted Men's Barracks Type, West end of Crissy Field, between Pearce & Maudlin Streets, San Francisco, San Francisco County, CA

Protective smoke hood studies.

DOT National Transportation Integrated Search

1970-12-01

The report describes the evaluation and testing of a high-temperature resistant, transparent, polyimide hood designed to protect aircraft passengers and crew from the effects of toxic fumes, smoke and flame resulting from an aircraft accident. As a '...

81. Neg. No. F63, Apr 13, 1930, INTERIORASSEMBLY BUILDING, HOOD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

81. Neg. No. F-63, Apr 13, 1930, INTERIOR-ASSEMBLY BUILDING, HOOD DEPARTMENT - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

Hood River PIT-tag interrogation system efficiency study. Annual report of U.S. Geological Survey activities: November 2010-October 2011

USGS Publications Warehouse

Jezorek, Ian G.; Connolly, Patrick J.

2012-01-01

An additional USGS-CRRL task, under contract number 50150, was to build three antennas for use with Destron-Fearing 2001F-ISO PIT tag readers. These antennas would be 5 used at the East Fork Hood River Acclimation site. They would be placed in the outflow channel to inform managers about the number of PIT tagged steelhead smolts released to the Hood River after a period of acclimation when some mortality and predation might occur. 

Process Development for the Fabrication of Spheroidal Microdevice Packages Utilizing MEMS Technologies

DTIC Science & Technology

2014-03-27

in a thin conductive layer, the wafer surface can be made into the cathode while using a stainless steel plate as an anode. Bath temperature, voltage...beakers with polytetrafluoroethylene (PTFE) tools while under a fume hood, as HF is known to attack glass and polystyrene [62]. Additionally

Entrance and Survival of Brucella pinnipedialis Hooded Seal Strain in Human Macrophages and Epithelial Cells

PubMed Central

Briquemont, Benjamin; Sørensen, Karen K.; Godfroid, Jacques

2013-01-01

Marine mammal Brucella spp. have been isolated from pinnipeds (B. pinnipedialis) and cetaceans (B. ceti) from around the world. Although the zoonotic potential of marine mammal brucellae is largely unknown, reports of human disease exist. There are few studies of the mechanisms of bacterial intracellular invasion and multiplication involving the marine mammal Brucella spp. We examined the infective capacity of two genetically different B. pinnipedialis strains (reference strain; NTCT 12890 and a hooded seal isolate; B17) by measuring the ability of the bacteria to enter and replicate in cultured phagocytes and epithelial cells. Human macrophage-like cells (THP-1), two murine macrophage cell lines (RAW264.7 and J774A.1), and a human malignant epithelial cell line (HeLa S3) were challenged with bacteria in a gentamicin protection assay. Our results show that B. pinnipedialis is internalized, but is then gradually eliminated during the next 72 – 96 hours. Confocal microscopy revealed that intracellular B. pinnipedialis hooded seal strain colocalized with lysosomal compartments at 1.5 and 24 hours after infection. Intracellular presence of B. pinnipedialis hooded seal strain was verified by transmission electron microscopy. By using a cholesterol-scavenging lipid inhibitor, entrance of B. pinnipedialis hooded seal strain in human macrophages was significantly reduced by 65.8 % (± 17.3), suggesting involvement of lipid-rafts in intracellular entry. Murine macrophages invaded by B. pinnipedialis do not release nitric oxide (NO) and intracellular bacterial presence does not induce cell death. In summary, B. pinnipedialis hooded seal strain can enter human and murine macrophages, as well as human epithelial cells. Intracellular entry of B. pinnipedialis hooded seal strain involves, but seems not to be limited to, lipid-rafts in human macrophages. Brucella pinnipedialis does not multiply or survive for prolonged periods intracellulary. PMID:24376851

Crashworthiness studies of locomotive wide nose short hood designs

DOT National Transportation Integrated Search

1999-11-01

This paper investigates the parameters that influence the structural response of typical wide nose locomotive short hoods involved in offset collisions. This accident scenario was chosen based upon the railway collision that occurred in Selma, North ...

Cobra Hoods Coming At You

NASA Image and Video Library

2004-06-17

This 3-D image taken by the left and right eyes of the panoramic camera on NASA Mars Exploration Rover Spirit shows the odd rock formation dubbed Cobra Hoods center. 3D glasses are necessary to view this image.

1. VIEW OF NORTHEAST (GABLE END) AND SOUTHEAST WALLS FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW OF NORTHEAST (GABLE END) AND SOUTHEAST WALLS FROM HOOD AVENUE, FACING NORTHWEST. - Fort McPherson, World War II Station Hospital, G. U. Treatment Unit Mess Hall, Thorne & Hood Avenues, Atlanta, Fulton County, GA

49 CFR 571.113 - Standard No. 113; Hood latch system.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Application. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses. S3... engine, luggage, storage, or battery compartment. S4. Requirements. S4.1Each hood must be provided with a...

49 CFR 571.113 - Standard No. 113; Hood latch system.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Application. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses. S3... engine, luggage, storage, or battery compartment. S4. Requirements. S4.1Each hood must be provided with a...

49 CFR 571.113 - Standard No. 113; Hood latch system.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... Application. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses. S3... engine, luggage, storage, or battery compartment. S4. Requirements. S4.1Each hood must be provided with a...

49 CFR 571.113 - Standard No. 113; Hood latch system.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Application. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses. S3... engine, luggage, storage, or battery compartment. S4. Requirements. S4.1Each hood must be provided with a...

49 CFR 571.113 - Standard No. 113; Hood latch system.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Application. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses. S3... engine, luggage, storage, or battery compartment. S4. Requirements. S4.1Each hood must be provided with a...

42 CFR 84.136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (a) Facepieces, hoods, and helmets shall be designed and constructed to provide adequate vision which... suitable material which does not interfere with the vision of the wearer. (2) Shields shall be mounted and...

42 CFR 84.136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (a) Facepieces, hoods, and helmets shall be designed and constructed to provide adequate vision which... suitable material which does not interfere with the vision of the wearer. (2) Shields shall be mounted and...

10. LOOKING SOUTH IN BOP SHOP AT FUME HOOD AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. LOOKING SOUTH IN BOP SHOP AT FUME HOOD AND SPARE OXYGEN LANCES ON THE SERVICE FLOOR OF THE FURNACE AISLE. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

28. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) building section & wall sections, plan number PE 1264.1 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

31. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) concrete dock details, plan number PE 1265.1 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

34. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) electrical riser plan, plan number PE 1268.2 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

DETAIL OF EAVES AND HOODS OVER WINDOWS ON NORTHEAST END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF EAVES AND HOODS OVER WINDOWS ON NORTHEAST END OF NORTHWEST SIDE, WITH SEABEE STATUE IN BACKGROUND. - U.S. Naval Base, Pearl Harbor, Joint Intelligence Center, Makalapa Drive in Makalapa Administration Area, Pearl City, Honolulu County, HI

Transportation observations, considerations and recommendations for Mt. Hood National Forest

DOT National Transportation Integrated Search

2009-06-24

A field investigation of the current transportation infrastructure and operations at Mt. Hood : National Forest (MHNF) by the interagency Transportation Assistance Group (TAG) was conducted June : 24-26, 2009, on behalf of the U.S. Forest Service (US...

14 CFR 93.61 - General rules: Lake Hood segment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false General rules: Lake Hood segment. 93.61 Section 93.61 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... maneuvering for a safe landing requires further descent. ...

75 FR 57976 - Designation of Service Area for Confederated Tribes of the Warm Springs of Oregon

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... office hours at Hood River County. Dated: August 26, 2010. Larry Echo Hawk, Assistant Secretary--Indian... will expand the service area for the Warm Springs Tribe to include Hood River County (Oregon). The...

29. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) building section & details, plan number PE 1264.2 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

A comparative study for radiological decontamination of laboratory fume hood materials.

PubMed

Thomas, Elizabeth; Sweet, Lucas; MacFarlan, Paul; McNamara, Bruce; Kerschner, Harrison

2012-08-01

The efficacy for radiological decontamination of the laboratory standard fume hood as constructed of stainless steel, compared to that of powder-coated carbon steel is described. While the chemical inertness of powder-coated surfaces is good, faced with everyday abrasion, aggressive inorganic solutions and vapors, and penetrating organics commonly employed in government laboratory fume hoods, radiological decontamination of powder-coated steel surfaces was found to be similar to those made of stainless steel for easily solubilized or digestible radionuclides. Plutonium was difficult to remove from stainless steel and powder-coated surfaces, especially after prolonged contact times.

EASAMS' Ariane 5 on-board software experience

NASA Astrophysics Data System (ADS)

Birnie, Steven Andrew

The design and development of the prototype flight software for the Ariane 5 satellite launch vehicle is considered. This was specified as being representative of the eventual real flight program in terms of timing constraints and target computer loading. The usability of HOOD (Hierarchical Object Oriented Design) and Ada for development of such preemptive multitasking computer programs was verified. Features of the prototype development included: design methods supplementary to HOOD for representation of concurrency aspects; visibility of Ada enumerated type literals across HOOD parent-child interfaces; deterministic timings achieved by modification of Ada delays; and linking of interrupts to Ada task entries.

Freshwater and Saline Loads of Dissolved Inorganic Nitrogen to Hood Canal and Lynch Cove, Western Washington

USGS Publications Warehouse

Paulson, Anthony J.; Konrad, Christopher P.; Frans, Lonna M.; Noble, Marlene; Kendall, Carol; Josberger, Edward G.; Huffman, Raegan L.; Olsen, Theresa D.

2006-01-01

Hood Canal is a long (110 kilometers), deep (175 meters) and narrow (2 to 4 kilometers wide) fjord of Puget Sound in western Washington. The stratification of a less dense, fresh upper layer of the water column causes the cold, saltier lower layer of the water column to be isolated from the atmosphere in the late summer and autumn, which limits reaeration of the lower layer. In the upper layer of Hood Canal, the production of organic matter that settles and consumes dissolved oxygen in the lower layer appears to be limited by the load of dissolved inorganic nitrogen (DIN): nitrate, nitrite, and ammonia. Freshwater and saline loads of DIN to Hood Canal were estimated from available historical data. The freshwater load of DIN to the upper layer of Hood Canal, which could be taken up by phytoplankton, came mostly from surface and ground water from subbasins, which accounts for 92 percent of total load of DIN to the upper layer of Hood Canal. Although DIN in rain falling on land surfaces amounts to about one-half of the DIN entering Hood Canal from subbasins, rain falling directly on the surface of marine waters contributed only 4 percent of the load to the upper layer. Point-source discharges and subsurface flow from shallow shoreline septic systems contributed less than 4 percent of the DIN load to the upper layer. DIN in saline water flowing over the sill into Hood Canal from Admiralty Inlet was at least 17 times the total load to the upper layer of Hood Canal. In September and October 2004, field data were collected to estimate DIN loads to Lynch Cove - the most inland marine waters of Hood Canal that routinely contain low dissolved-oxygen waters. Based on measured streamflow and DIN concentrations, surface discharge was estimated to have contributed about one-fourth of DIN loads to the upper layer of Lynch Cove. Ground-water flow from subbasins was estimated to have contributed about one-half of total DIN loads to the upper layer. In autumn 2004, the relative contribution of DIN from shallow shoreline septic systems to the upper layer was higher in Lynch Cove (23 percent) than in the entire Hood Canal. Net transport of DIN into Lynch Cove by marine currents was measured during August and October 2004-a time of high biological productivity. The net transport of lower-layer water into Lynch Cove was significantly diminished relative to the flow entering Hood Canal at its entrance. Even though the net transport of saline water into the lower layer of Lynch Cove was only 119 cubic meters per second, estuarine currents between 33 and 47 m were estimated to have carried more than 35 times the total freshwater load of DIN to the upper layer from surface and ground water, shallow shoreline septic systems, and direct atmospheric rainfall. The subsurface maximums in measured turbidity, chlorophyll a, particulate organic carbon, and particulate organic nitrogen strongly suggest that the upward mixing of nitrate-rich deeper water is a limiting factor in supplying DIN to the upper layer that enhances marine productivity in Lynch Cove. The presence of phosphate in the upper layer in the absence of dissolved inorganic nitrogen also suggests that the biological productivity that leads to low dissolved-oxygen concentrations in the lower layer of Lynch Cove is limited by the supply of nitrogen rather than by phosphate loads. Although the near-shore zones of the shallow parts of Lynch Cove were sampled, a biogeochemical signal from terrestrial nitrogen was not found. Reversals in the normal estuarine circulation suggest that if the relative importance of the DIN load of freshwater terrestrial and atmospheric sources and the DIN load from transport of saline water by the estuarine circulation in controlling dissolved-oxygen concentrations in Lynch Cove is to be better understood, then the physical forces driving Hood Canal circulation must be better defined.

Federally Mandated Evaluation of Vocational Programs: One College's Response.

ERIC Educational Resources Information Center

Stevenson, Mike; Walleri, R. Dan

The process and findings of the evaluation of seven of the 52 vocational preparatory programs at Mount Hood Community College are described with a focus on demonstrating the feasibility, utility, and problems associated with making program evaluations meet both internal needs and federal requirements. Summaries of data collected are provided in…

Cry, Baby, Cry: A Dialogic Response to Emotion

ERIC Educational Resources Information Center

White, E. Jayne

2013-01-01

This article challenges traditional approaches to emotion as a discreet biological or dialectic process in the early years. In doing so the proposition is made that emotion is an answerable social act of meaning-making and self-hood. Inspired by Bakhtinian philosophy, which resists separating emotion from cognition or the individual from their…

33. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) electric plan & light fixture schedule, plan number PE 1268.1 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

8. Front (east) side of incinerator and glove boxes. Ash ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Front (east) side of incinerator and glove boxes. Ash canning hood to the left, combustion chamber in the middle, incinerator hood to the right. Looking west. - Plutonium Finishing Plant, Waste Incinerator Facility, 200 West Area, Richland, Benton County, WA

Measurement of the Microstructure of Ocean Surface Roughness

DTIC Science & Technology

1996-10-01

ptezmä. fa: paHki 19970303 135 DTIO QUALITY INSPECTED 1 PROCEEDINGS MICROSTRUCTURE SENSORS WORKSHOP 23-25 October 1996 Timberline Lodge , Mt. Hood...Sensors Workshop, 23-25 October 1996, Timberline Lodge , Mt. Hood, Oregon 12a. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release

32. Photographic copy of the Post Engineer drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. Photographic copy of the Post Engineer drawing (original is located at Fort Hood) compressor, evaporative condenser & unit cooler schedules, plan number PE 1268 - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

Locating inputs of freshwater to Lynch Cove, Hood Canal, Washington, using aerial infrared photography

USGS Publications Warehouse

Sheibley, Rich W.; Josberger, Edward G.; Chickadel, Chris

2010-01-01

The input of freshwater and associated nutrients into Lynch Cove and lower Hood Canal (fig. 1) from sources such as groundwater seeps, small streams, and ephemeral creeks may play a major role in the nutrient loading and hydrodynamics of this low dissolved-oxygen (hypoxic) system. These disbursed sources exhibit a high degree of spatial variability. However, few in-situ measurements of groundwater seepage rates and nutrient concentrations are available and thus may not represent adequately the large spatial variability of groundwater discharge in the area. As a result, our understanding of these processes and their effect on hypoxic conditions in Hood Canal is limited. To determine the spatial variability and relative intensity of these sources, the U.S. Geological Survey Washington Water Science Center collaborated with the University of Washington Applied Physics Laboratory to obtain thermal infrared (TIR) images of the nearshore and intertidal regions of Lynch Cove at or near low tide. In the summer, cool freshwater discharges from seeps and streams, flows across the exposed, sun-warmed beach, and out on the warm surface of the marine water. These temperature differences are readily apparent in aerial thermal infrared imagery that we acquired during the summers of 2008 and 2009. When combined with co-incident video camera images, these temperature differences allow identification of the location, the type, and the relative intensity of the sources.

5. VIEW OF SITE A FROM SOUTH END OF HOOD, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW OF SITE A FROM SOUTH END OF HOOD, FACING NORTH (BUILDINGS 117, 120, 122, 116, 128, and 121 ARE VISIBLE.) - Fort McPherson, World War II Station Hospital, Structures, Bordered by Hardee & Thorne Avenues & Howe Street, Atlanta, Fulton County, GA

Setting-up tension in the style of Marantaceae.

PubMed

Pischtschan, E; Classen-Bockhoff, R

2008-07-01

The Marantaceae stand out from other plant families through their unique style movement which is combined with a highly derived form of secondary pollen presentation. Although known for a long time, the mechanism underlying the movement is not yet understood. In this paper, we report an investigation into the biomechanical principles of this movement. For the first time we experimentally confirm that, in Maranta noctiflora, longitudinal growth of the maturing style within the 'straitjacket' of the hooded staminode involves both arresting of the style before tripping and building up of potential for the movement. The longer the style grows in relation to the enclosing hooded staminode, the more does its capacity for curling increase. We distinguish between the basic tension that a growing style builds up normally, even when the hooded staminode is removed beforehand, and the induced tension which comes about only under the pressure of a too short hooded staminode and which enables the movement. The results of our investigations are discussed in relation to previous interpretations, ranging from biomechanical to electrophysiological mechanisms.

Experiments on the mechanism of underwater hearing.

PubMed

Pau, Hans Wilhelm; Warkentin, Mareike; Specht, Olaf; Krentz, Helga; Herrmann, Anne; Ehrt, Karsten

2011-12-01

The findings suggest that underwater sound perception is realized by the middle ear rather than by bone conduction, at least in shallow water conditions. To prove whether underwater sound perception is effected by bone conduction or by conduction via the middle ear. Five divers, breathing through snorkels, were tested in a swimming pool, to determine whether a sound was louder when the acoustic source placed was in front of the head in comparison with a lateral application facing the ear region. The second experiment investigated whether sound perception is influenced by ear protection plugs in underwater conditions. Also, the effect of a 5 mm thick neoprene hood was determined, with and without an additional perforation in the ear region. Sounds were louder when applied from a position laterally facing the ear, louder without than with a protection plug, louder without than with a neoprene hood on, and louder when the neoprene hood had a perforation in the region of the ear than with an intact hood.

Neonatal incubators: a toxic sound environment for the preterm infant?*.

PubMed

Marik, Paul E; Fuller, Christopher; Levitov, Alexander; Moll, Elizabeth

2012-11-01

High sound pressure levels may be harmful to the maturing newborn. Current guidelines suggest that the sound pressure levels within a neonatal intensive care unit should not exceed 45 dB(A). It is likely that environmental noise as well as the noise generated by the incubator fan and respiratory equipment may contribute to the total sound pressure levels. Knowledge of the contribution of each component and source is important to develop effective strategies to reduce noise within the incubator. The objectives of this study were to determine the sound levels, sound spectra, and major sources of sound within a modern neonatal incubator (Giraffe Omnibed; GE Healthcare, Helsinki, Finland) using a sound simulation study to replicate the conditions of a preterm infant undergoing high-frequency jet ventilation (Life Pulse, Bunnell, UT). Using advanced sound data acquisition and signal processing equipment, we measured and analyzed the sound level at a dummy infant's ear and at the head level outside the enclosure. The sound data time histories were digitally acquired and processed using a digital Fast Fourier Transform algorithm to provide spectra of the sound and cumulative sound pressure levels (dBA). The simulation was done with the incubator cooling fan and ventilator switched on or off. In addition, tests were carried out with the enclosure sides closed and hood down and then with the enclosure sides open and the hood up to determine the importance of interior incubator reverberance on the interior sound levels With all the equipment off and the hood down, the sound pressure levels were 53 dB(A) inside the incubator. The sound pressure levels increased to 68 dB(A) with all equipment switched on (approximately 10 times louder than recommended). The sound intensity was 6.0 × 10(-8) watts/m(2); this sound level is roughly comparable with that generated by a kitchen exhaust fan on high. Turning the ventilator off reduced the overall sound pressure levels to 64 dB(A) and the sound pressure levels in the low-frequency band of 0 to 100 Hz were reduced by 10 dB(A). The incubator fan generated tones at 200, 400, and 600 Hz that raised the sound level by approximately 2 dB(A)-3 dB(A). Opening the enclosure (with all equipment turned on) reduced the sound levels above 50 Hz by reducing the revereberance within the enclosure. The sound levels, especially at low frequencies, within a modern incubator may reach levels that are likely to be harmful to the developing newborn. Much of the noise is at low frequencies and thus difficult to reduce by conventional means. Therefore, advanced forms of noise control are needed to address this issue.

Cognitive enhancement by omega-3 fatty acids from child-hood to old age: findings from animal and clinical studies.

PubMed

Luchtman, Dirk W; Song, Cai

2013-01-01

Omega-(n)-3 polyunsaturated fatty acids (PUFAs), including docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) are major components of neuronal membranes and have a wide range of functions, from modulating synaptic plasticity and neurochemistry, to neuroimmune-modulation and neuroprotection. Thus, it is not surprising that n-3 PUFA are widely acknowledged to have cognitive-enhancing effects. Although clinical evidence is somewhat conflicting, probably in large part due to methodological issues, animal studies have consistently demonstrated that n-3 PUFA are indispensable for proper brain development, may enhance cognitive function in healthy, adult individuals and attenuate cognitive impairment in aging and age-related disorders, such as dementia. This review discusses and integrates up to date evidence from clinical and animal studies investigating the cognitive-enhancing effects of n-3 PUFA during development, child- and adult-hood, as well as old-age with associated neurodegenerative diseases, such as Alzheimer's disease. Furthermore, we cover the major underlying biochemical and neurophysiological mechanisms by which n-3 PUFA mediate these effects on cognition. This article is part of a Special Issue entitled 'Cognitive Enhancers'. Copyright © 2012 Elsevier Ltd. All rights reserved.

Forecasting Science and Technology for the Department of Defense

DTIC Science & Technology

2009-12-01

Watson and Francis Crick announced that they had elucidated the structure of DNA and had therefore “discovered the secret of life.” While this was a...an organic chemist, figured out a process by which very small quantities of DNA could be amplified with high fidelity. This process, known as...polymerase chain reaction (PCR), for the first time, allowed scientists to produce DNA in large quantities. Roughly during this period, Leroy Hood and

Hood College, Frederick National Laboratory Will Renew Popular Scientific Symposium | Frederick National Laboratory for Cancer Research

Cancer.gov

FREDERICK, Md. -- Hood College and the Frederick National Laboratory for Cancer Research have partnered to cohost an annual scientific symposium in the tradition of the landmark Oncogene Meeting, a national fixture in Frederick for more than 20 year

118. VIEW, LOOKING SOUTHWEST OF GOLD AMALGAMATION ROOM, SHOWING AMALGAMATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

118. VIEW, LOOKING SOUTHWEST OF GOLD AMALGAMATION ROOM, SHOWING AMALGAMATION BARREL AT CENTER FOREGROUND, BULLION FURNACE IN LARGE HOOD BEHIND IT, AND GOLD RETORT IN BACKGROUND HOOD. NOTE OVERHEAD MONORAIL FOR MATERIALS HANDLING. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

West shore hood canal outfall windshield survey SR 101 MP 293.5 tO 341.0

DOT National Transportation Integrated Search

1996-08-01

Western Washington's population increased dramatically during the last 40 years. The west shore of Hood Canal is now largely settled with the homes of retirees and seasonal residents. Many of these beachfront houses are connected to septic systems th...

Design and validation of a passive deposition sampler.

PubMed

Einstein, Stephanie A; Yu, Chang-Ho; Mainelis, Gediminas; Chen, Lung Chi; Weisel, Clifford P; Lioy, Paul J

2012-09-01

A new, passive particle deposition air sampler, called the Einstein-Lioy Deposition Sampler (ELDS), has been developed to fill a gap in passive sampling for near-field particle emissions. The sampler can be configured in several ways: with a protective hood for outdoor sampling, without a protective hood, and as a dust plate. In addition, there is an XRF-ready option that allows for direct sampling onto a filter-mounted XRF cartridge which can be used in conjunction with all configurations. A wind tunnel was designed and constructed to test the performance of different sampler configurations using a test dust with a known particle size distribution. The sampler configurations were also tested versus each other to evaluate whether or not the protective hood would affect the collected particle size distribution. A field study was conducted to test the sampler under actual environmental conditions and to evaluate its ability to collect samples for chemical analysis. Individual experiments for each configuration demonstrated precision of the sampler. The field experiment demonstrated the ability of the sampler to both collect mass and allow for the measurement of an environmental contaminant i.e. Cr(6+). The ELDS was demonstrated to be statistically not different for Hooded and Non-Hooded models, compared to each other and the test dust; thus, it can be used indoors and outdoors in a variety of configurations to suit the user's needs.

Study the velocity and pressure exerted in front of the filter surface in the kitchen hood system by using ANSYS

NASA Astrophysics Data System (ADS)

Asmuin, Norzelawati; Pairan, M. Rasidi; Isa, Norasikin Mat; Sies, Farid

2017-04-01

Commercial kitchen hood ventilation system is a device used to capture and filtered the plumes from cooking activities in the kitchen area. Nowadays, it is very popular in the industrial sector such as restaurant and hotel to provide hygiene food. This study focused at the KSA filter part which installed in the kitchen hood system, the purpose of this study is to identify the critical region which indicated by observing the velocity and pressure of plumes exerted at of KSA filter. It is important to know the critical location of the KSA filter in order to install the nozzle which will helps increase the filtration effectiveness. The ANSYS 16.1 (FLUENT) software as a tool used to simulate the kitchen hood systems which consist of KSA filter. The commercial kitchen hood system model has a dimension 700 mm width, 1600 mm length and 555 mm height. The system has two inlets and one outlet. The velocity of the plumes is set to be 0.235m/s and the velocity of the inlet capture jet is set to be 1.078m/s. The KSA filter is placed 45 degree from the y axis. The result shows the plumes has more tendency flowing pass through at the bottom part of KSA filter.

Method of manufacturing carbon nanotubes

NASA Technical Reports Server (NTRS)

Benavides, Jeanette M. (Inventor); Leidecker, Henning W. (Inventor); Frazier, Jeffrey (Inventor)

2004-01-01

A process for manufacturing carbon nanotubes, including a step of inducing electrical current through a carbon anode and a carbon cathode under conditions effective to produce the carbon nanotubes, wherein the carbon cathode is larger than the carbon anode. Preferably, a welder is used to induce the electrical current via an arc welding process. Preferably, an exhaust hood is placed on the anode, and the process does not require a closed or pressurized chamber. The process provides high-quality, single-walled carbon nanotubes, while eliminating the need for a metal catalyst.

U.S. Transportation Secretary Ray LaHood announces federal ban on texting for commercial truck drivers

DOT National Transportation Integrated Search

2010-01-26

U.S Transportation Secretary Ray LaHood today announced federal guidance to expressly prohibit texting by drivers of commercial vehicles such as large trucks and buses. The prohibition is effective immediately and is the latest in a series of actions...

38. From hilltop, Route 14, last segment of flume before ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. From hilltop, Route 14, last segment of flume before Broughton Lumber Company. Section of flume and broken out section. Columbia River and Oregon in background. West/southwest 240 degrees. - Broughton Flume, Hood River Junction on Columbia River at Washington/Oregon border, Hood, Skamania County, WA

Persistence of Change: Fume Hood Campaign Lessons

ERIC Educational Resources Information Center

Feder, Elah; Robinson, Jennifer; Wakefield, Sarah

2012-01-01

Purpose: Sustainability initiatives typically operate for a limited time period, but it is often unclear whether they have lasting effects. The purpose of this paper is to examine a laboratory fume hood campaign, in order to identify factors that might contribute or detract from long-term change persistence. Design/methodology/approach: The…

EFFECT OF ATRAZINE ON OVARIAN FUNCTION IN THE RAT

EPA Science Inventory

The effect of the chlorotriazine herbicide, atrazine, on ovarian function was studied in Long-Evans hooded (LE-hooded) and SpragucDawley (SD) rats. Atrazine was administered by gavage for 21 d to females displaying regular 4-d estrous cycles. In both sfrains, 75 mg/kg/d disrupted...

76 FR 55648 - Sunsations Inc., Provisional Acceptance of a Settlement Agreement and Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-08

...) 504-7809. SUPPLEMENTARY INFORMATION: The text of the Agreement and Order appears below. Dated... upper outerwear products with drawstrings at the hood or neck. Specifically, from March 2008 through... the hood or neck (sweatshirts), manufactured by GJC International and Top Image USA. From May 2009...

17. Photographic copy of the Quartermaster General drawing (original is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Photographic copy of the Quartermaster General drawing (original is located at Fort Hood). Grease pit details, drawing number 800-609.1 - Fort Hood, World War II Temporary Buildings, Company Maintenance Shop & Arms Room, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

42 CFR 84.1136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Facepieces, hoods, and helmets; eyepieces; minimum requirements. 84.1136 Section 84.1136 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Facepieces, hoods, and helmets; eyepieces; minimum requirements. 84.1136 Section 84.1136 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Facepieces, hoods, and helmets; eyepieces; minimum requirements. 84.1136 Section 84.1136 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Facepieces, hoods, and helmets; eyepieces; minimum requirements. 84.1136 Section 84.1136 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1136 - Facepieces, hoods, and helmets; eyepieces; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Facepieces, hoods, and helmets; eyepieces; minimum requirements. 84.1136 Section 84.1136 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

Mt. Hood Community College Institutional Effectiveness (IE) Report Fall 2001.

ERIC Educational Resources Information Center

Walleri, R. Dan

This report examines the indicators of institutional effectiveness for Mount Hood Community College (MHCC) (Oregon). The document reports on five institutional goals: (1) knowledge-based workforce education and services; (2) access for members of the community and development of an environment in which diversity thrives; (3) economic development,…

Academic Colors...Academic Confusion.

ERIC Educational Resources Information Center

Strickland, S. Mark; Fluitt, John L.

1985-01-01

The use of colors in tassels and hood trimmings to signify the subject areas of degrees is discussed, and variations in this practice are described. Whether the color of the hood trimming should indicate the major subject studied or the subject area incorporated in the title of the degree is debated. (MLW)

Defense.gov Special Report: Fort Hood Shooting

Science.gov Websites

in the assailant's background, medical or military profile that might have provided an early warning Shootings President Barack Obama commended the military personnel, first responders and medical staff who interactive planar photo of Fort Hood, highlighting six buildings: 61st First Medical Brigade Annex

7 CFR 927.11 - District.

Code of Federal Regulations, 2014 CFR

2014-01-01

... District shall include all the counties in the State of Oregon except for Hood River and Wasco counties. (2) Mid-Columbia District shall include Hood River and Wasco counties in the State of Oregon, and the counties of Skamania and Klickitat in the State of Washington. (3) Wenatchee District shall include the...

7 CFR 927.11 - District.

Code of Federal Regulations, 2010 CFR

2010-01-01

... District shall include all the counties in the State of Oregon except for Hood River and Wasco counties. (2) Mid-Columbia District shall include Hood River and Wasco counties in the State of Oregon, and the counties of Skamania and Klickitat in the State of Washington. (3) Wenatchee District shall include the...

7 CFR 927.11 - District.

Code of Federal Regulations, 2011 CFR

2011-01-01

... District shall include all the counties in the State of Oregon except for Hood River and Wasco counties. (2) Mid-Columbia District shall include Hood River and Wasco counties in the State of Oregon, and the counties of Skamania and Klickitat in the State of Washington. (3) Wenatchee District shall include the...

7 CFR 927.11 - District.

Code of Federal Regulations, 2013 CFR

2013-01-01

... District shall include all the counties in the State of Oregon except for Hood River and Wasco counties. (2) Mid-Columbia District shall include Hood River and Wasco counties in the State of Oregon, and the counties of Skamania and Klickitat in the State of Washington. (3) Wenatchee District shall include the...

7 CFR 927.11 - District.

Code of Federal Regulations, 2012 CFR

2012-01-01

... District shall include all the counties in the State of Oregon except for Hood River and Wasco counties. (2) Mid-Columbia District shall include Hood River and Wasco counties in the State of Oregon, and the counties of Skamania and Klickitat in the State of Washington. (3) Wenatchee District shall include the...

Pedestrian Injuries By Source: Serious and Disabling Injuries in US and European Cases

PubMed Central

Mallory, Ann; Fredriksson, Rikard; Rosén, Erik; Donnelly, Bruce

2012-01-01

US and European pedestrian crash cases were analyzed to determine frequency of injury by body region and by the vehicle component identified as the injury source. US pedestrian data was drawn from the Pedestrian Crash Data Study (PCDS). European pedestrian data was drawn from the German In-Depth Accident Study (GIDAS). Results were analyzed in terms of both serious injury (AIS 3+) and disabling injury estimated with the Functional Capacity Index (FCI). The results are presented in parallel for a more complete international perspective on injuries and injury sources. Lower extremity injury from bumper impact and head&face injury from windshield impact were the most frequent combinations for both serious and disabling injuries. Serious lower extremity injuries from bumper contact occurred in 43% of seriously injured pedestrian cases in US PCDS data and 35% of European GIDAS cases. Lower-extremity bumper injuries also account for more than 20% of disability in both datasets. Serious head &face injuries from windshield contact occur in 27% of PCDS and 15% of GIDAS serious injury cases. While bumper impacts primarily result in lower extremity injury and windshield impacts are most often associated with head & face injuries, the hood and hood leading edge are responsible for serious and disabling injuries to a number of different body regions. Therefore, while it is appropriate to focus on lower extremity injury when studying bumper performance and on head injury risk when studying windshield impact, pedestrian performance of other components may require better understanding of injury risk for multiple body regions. PMID:23169112

Robin Hood Comes of Age.

ERIC Educational Resources Information Center

Barnhouse, Rebecca

2003-01-01

Considers how while some Robin Hood books are clearly intended for young readers, others blur the boundaries, sometimes in ways that help break down artificial boundaries dividing fiction for children from that for adults. Explores the legend's long history to help understand why the story lends itself to such a wide variety of retellings.…

42 CFR 84.198 - Half-mask facepieces, full facepieces, mouthpieces, hoods, and helmets; fit; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, mouthpieces... APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Chemical Cartridge Respirators § 84.198 Half-mask facepieces, full facepieces, mouthpieces, hoods, and helmets; fit; minimum requirements. (a) Half-mask facepieces...

National Writing Project's Multimodal Literacies and Teacher Collaboration: Enhanced Student Learning on Global Social Issues

ERIC Educational Resources Information Center

Iyengar, Kalpana; Hood, Caleb

2016-01-01

Iyengar and Hood, both teacher consultants with the San Antonio Writing Project (SAWP), and instructors of an undergraduate society and social issues class, collaborated to enhance their undergraduate students' writing experiences using the National Writing Project model (Lieberman & Wood, 2003). Iyengar and Hood used strategies such as…

The Impact of Training and Equipment at the Battle of Attu, Aleutian Campaign - Historical Study and Current Perspective

DTIC Science & Technology

2015-06-12

Waterproofed - Not durable past a few days Jacket Reversible ski parka (R) - Hood - More protection from wind and rain Arctic field jacket (I...No hood - Less protection from wind and rain Sweater Recommended - Necessity in extreme cold based on Alaska experience Not issued - Not

For White Folks Who Teach (Music) in the Hood

ERIC Educational Resources Information Center

Karvelis, Noah J.

2017-01-01

In this article, I aim to critically analyze theories contained within Dr. Christopher Emdin's newest book "For White Folks Who Teach in the Hood (and the Rest of Ya'll Too!)" in the context of the music classroom. To begin, I summarize Christopher Emdin's theories of both "reality" and "pentecostal" pedagogy and then…

33 CFR 334.1220 - Hood Canal, Bangor; naval restricted areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Hood Canal, Bangor; naval restricted areas. 334.1220 Section 334.1220 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF... intermittently by the Navy for magnetic silencing operations. (B) Use of any equipment such as anchors, grapnels...

42 CFR 84.1139 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Air velocity and noise levels; hoods and helmets; minimum requirements. 84.1139 Section 84.1139 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF...

42 CFR 84.1139 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Air velocity and noise levels; hoods and helmets; minimum requirements. 84.1139 Section 84.1139 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF...

42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. 84.1135 Section 84.1135 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED...

42 CFR 84.1139 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Air velocity and noise levels; hoods and helmets; minimum requirements. 84.1139 Section 84.1139 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF...

42 CFR 84.1139 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Air velocity and noise levels; hoods and helmets; minimum requirements. 84.1139 Section 84.1139 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF...

42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. 84.1135 Section 84.1135 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED...

42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. 84.1135 Section 84.1135 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED...

42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. 84.1135 Section 84.1135 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED...

42 CFR 84.1139 - Air velocity and noise levels; hoods and helmets; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Air velocity and noise levels; hoods and helmets; minimum requirements. 84.1139 Section 84.1139 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF...

42 CFR 84.1135 - Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Half-mask facepieces, full facepieces, hoods, helmets, and mouthpieces; fit; minimum requirements. 84.1135 Section 84.1135 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED...

42 CFR 84.130 - Supplied-air respirators; description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... material to protect the window(s) of facepieces, hoods, and helmets which do not unduly interfere with the wearer's vision and permit easy access to the external surface of such window(s) for cleaning. (c) Type..., glass, woven wire, sheet metal, or other suitable material to protect the window(s) of facepieces, hoods...

EVALUATION OF FERTILIZATION FOLLOWING OVULATORY DELAY WITH THIRAM IN THE LONG-EVANS HOODED RAT

EPA Science Inventory

Evaluation of fertilization following ovulatory delay with thiram in the Long-Evans Hooded Rat

1TE Stoker, 1* S Jeffay, and 1 SD Perreault.

1Gamete and Early Embryogenesis Biology Branch and 2 Endocrinology Branch, Reproductive Toxicology Division, NHEERL, US EPA, R...

Don Quixote, Machiavelli, and Robin Hood: public health practice, past and present.

PubMed

Mullan, F

2000-05-01

Since the mid-19th century, when the first formal health departments were established in the United States, commissioners, directors, and secretaries of public health have functioned as senior members of the staffs of public executives, mayors, governors, and presidents. They have provided important political, managerial, and scientific leadership to agencies of government that have played increasingly important roles in national life, from the sanitary revolution of the 19th century to the prevention of HIV/AIDS and the control of tobacco use today. Although public health officials come from a variety of backgrounds and oversee agencies of varied size and composition, there are philosophical themes that describe and define the commonality of their work. These themes are captured metaphorically by 3 celebrated figures: Don Quixote, Machiavelli, and Robin Hood. By turns, the public health official functions as a determined idealist (Don Quixote), a cunning political strategist (Machiavelli), and an agent who redistributes resources from the wealthier sectors of society to the less well off (Robin Hood.) All 3 personae are important, but, it is argued, Robin Hood is the most endangered.

Don Quixote, Machiavelli, and Robin Hood: public health practice, past and present.

PubMed Central

Mullan, F

2000-01-01

Since the mid-19th century, when the first formal health departments were established in the United States, commissioners, directors, and secretaries of public health have functioned as senior members of the staffs of public executives, mayors, governors, and presidents. They have provided important political, managerial, and scientific leadership to agencies of government that have played increasingly important roles in national life, from the sanitary revolution of the 19th century to the prevention of HIV/AIDS and the control of tobacco use today. Although public health officials come from a variety of backgrounds and oversee agencies of varied size and composition, there are philosophical themes that describe and define the commonality of their work. These themes are captured metaphorically by 3 celebrated figures: Don Quixote, Machiavelli, and Robin Hood. By turns, the public health official functions as a determined idealist (Don Quixote), a cunning political strategist (Machiavelli), and an agent who redistributes resources from the wealthier sectors of society to the less well off (Robin Hood.) All 3 personae are important, but, it is argued, Robin Hood is the most endangered. PMID:10800417

Investigating Annual Diving Behaviour by Hooded Seals (Cystophora cristata) within the Northwest Atlantic Ocean

PubMed Central

Andersen, Julie M.; Skern-Mauritzen, Mette; Boehme, Lars; Wiersma, Yolanda F.; Rosing-Asvid, Aqqalu; Hammill, Mike O.; Stenson, Garry B.

2013-01-01

With the exception of relatively brief periods when they reproduce and moult, hooded seals, Cystophora cristata, spend most of the year in the open ocean where they undergo feeding migrations to either recover or prepare for the next fasting period. Valuable insights into habitat use and diving behaviour during these periods have been obtained by attaching Satellite Relay Data Loggers (SRDLs) to 51 Northwest (NW) Atlantic hooded seals (33 females and 18 males) during ice-bound fasting periods (2004−2008). Using General Additive Models (GAMs) we describe habitat use in terms of First Passage Time (FPT) and analyse how bathymetry, seasonality and FPT influence the hooded seals’ diving behaviour described by maximum dive depth, dive duration and surface duration. Adult NW Atlantic hooded seals exhibit a change in diving activity in areas where they spend >20 h by increasing maximum dive depth, dive duration and surface duration, indicating a restricted search behaviour. We found that male and female hooded seals are spatially segregated and that diving behaviour varies between sexes in relation to habitat properties and seasonality. Migration periods are described by increased dive duration for both sexes with a peak in May, October and January. Males demonstrated an increase in dive depth and dive duration towards May (post-breeding/pre-moult) and August–October (post-moult/pre-breeding) but did not show any pronounced increase in surface duration. Females dived deepest and had the highest surface duration between December and January (post-moult/pre-breeding). Our results suggest that the smaller females may have a greater need to recover from dives than that of the larger males. Horizontal segregation could have evolved as a result of a resource partitioning strategy to avoid sexual competition or that the energy requirements of males and females are different due to different energy expenditure during fasting periods. PMID:24282541

HRT-UML: a design method for hard real-time systems based on the UML notation

NASA Astrophysics Data System (ADS)

D'Alessandro, Massimo; Mazzini, Silvia; di Natale, Marco; Lipari, Giuseppe

2002-07-01

The Hard Real-Time-Unified Modelling Language (HRT-UML) method aims at providing a comprehensive solution to the modeling of Hard Real Time systems. The experience shows that the design of Hard Real-Time systems needs methodologies suitable for the modeling and analysis of aspects related to time, schedulability and performance. In the context of the European Aerospace community a reference method for design is Hierarchical Object Oriented Design (HOOD) and in particular its extension for the modeling of hard real time systems, Hard Real-Time-Hierarchical Object Oriented Design (HRT-HOOD), recommended by the European Space Agency (ESA) for the development of on-board systems. On the other hand in recent years the Unified Modelling Language (UML) has been gaining a very large acceptance in a wide range of domains, all over the world, becoming a de-facto international standard. Tool vendors are very active in this potentially big market. In the Aerospace domain the common opinion is that UML, as a general notation, is not suitable for Hard Real Time systems, even if its importance is recognized as a standard and as a technological trend in the near future. These considerations suggest the possibility of replacing the HRT-HOOD method with a customized version of UML, that incorporates the advantages of both standards and complements the weak points. This approach has the clear advantage of making HRT-HOOD converge on a more powerful and expressive modeling notation. The paper identifies a mapping of the HRT-HOOD semantics into the UML one, and proposes a UML extension profile, that we call HRT-UML, based on the UML standard extension mechanisms, to fully represent HRT-HOOD design concepts. Finally it discusses the relationships between our profile and the UML profile for schedulability, performance and time, adopted by OMG in November 2001.

Defense.gov - Special Report - Tragedy at Fort Hood

Science.gov Websites

that left 13 dead and 38 wounded, soldiers, family members and civilians who work on post are looking the 13 victims of the Nov. 5 shooting spree at the Soldier Readiness Processing Center on the post shooting incident on the post. Story Army Chief of Staff Pledges Resources WASHINGTON, Nov. 9, 2009 – The

EFFECT OF AN ACUTE EXPOSURE TO MOLINATE ON OVULATION IN THE LONG-EVANS HOODED RAT

EPA Science Inventory

EFFECT OF AN ACUTE EXPOSURE TO MOLINATE ON OVULATION IN THE LONG-EVANS HOODED RAT. T E Stoker, D L Guidici, S C Jeffay, W K McElroy, S D Perreault and R L Cooper. Reproductive Toxicology Division, NHEERL, ORD, US EPA, RTP, NC. Sponsor: RJ Kavlock.
Molinate, a thiocarbamate ...

Effect of Diving and Diving Hoods on the Bacterial Flora of the External Ear Canal and Skin

DTIC Science & Technology

1982-05-01

in parentheses itidicate number of sites tested. b One strain isolated from skin laceration exposed to water. "Diver developed external otitis media 5... otitis media (11), skin infections skin of wearing diving hoods in and out of the (6), and diarrheal diseases (10). One aspect of water. We

Investigating the Relationship between Fin and Blue Whale Locations, Zooplankton Concentrations and Hydrothermal Venting on the Juan de Fuca Ridge

DTIC Science & Technology

2011-09-30

using Passive Acoustics ( Timberline Lodge , Mount Hood, Oregon). Wilcock, W. S. D. (2011a). "Application of double-difference earthquake relocation...Mammals using Passive Acoustics ( Timberline Lodge , Mount Hood, Oregon). Wilcock, W. S. D. (2011b). "Tracking fin whales in the northeast Pacific

6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. SCRAPS OF ENRICHED URANIUM FROM MACHINING OPERATIONS WERE CLEANED IN A SOLVENT BATH, THEN PRESSED INTO BRIQUETTS. THE BRIQUETTS WERE USED AS FEED MATERIAL FOR THE FOUNDRY. (4/4/66) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

Dollar Cost Banding: A New Algorithm for Computing Inventory Levels for Army Supply Support Activities

DTIC Science & Technology

2004-01-01

items are too long or bulky to be stored in the limited number of containers, trailers, or flatbeds that are used to deploy most stocks. • Demand pattern...COVER FRAME; WINDOW; VEHICULAR GLASS LAMINATED FLA GRILLE; RADIATOR; VEH GRILLE; VENTILATION HOOD ASSEMBLY HOOD ENGINE COMPART PAN; DRIP 89 APPENDIX D DCB

27 CFR 555.211 - Construction of type 5 magazines.

Code of Federal Regulations, 2010 CFR

2010-04-01

... less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks, hasps... with one steel padlock (which need not be protected by a steel hood) having at least five tumblers and... fastened to the magazine and to the door frame. These requirements do not apply to magazine doors that are...

27 CFR 555.211 - Construction of type 5 magazines.

Code of Federal Regulations, 2011 CFR

2011-04-01

... less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks, hasps... with one steel padlock (which need not be protected by a steel hood) having at least five tumblers and... fastened to the magazine and to the door frame. These requirements do not apply to magazine doors that are...

27 CFR 555.211 - Construction of type 5 magazines.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Construction of type 5 magazines. A type 5 magazine is a building, igloo or “Army-type structure”, tunnel... less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks, hasps... with one steel padlock (which need not be protected by a steel hood) having at least five tumblers and...

27 CFR 555.211 - Construction of type 5 magazines.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Construction of type 5 magazines. A type 5 magazine is a building, igloo or “Army-type structure”, tunnel... less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks, hasps... with one steel padlock (which need not be protected by a steel hood) having at least five tumblers and...

27 CFR 555.211 - Construction of type 5 magazines.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Construction of type 5 magazines. A type 5 magazine is a building, igloo or “Army-type structure”, tunnel... less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks, hasps... with one steel padlock (which need not be protected by a steel hood) having at least five tumblers and...

27 CFR 555.210 - Construction of type 4 magazines.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Construction of type 4 magazines. A type 4 magazine is a building, igloo or “Army-type structure”, tunnel... steel hoods constructed so as to prevent sawing or lever action on the locks, hasps, and staples. These... shackle of at least 3/8 inch diameter. Padlocks must be protected with not less than 1/4 inch steel hoods...

Rockfall Milepoint 49 Monitoring Plan for Check Dams on Mt. Hood Highway (US 26) (M.P. 49.10 to M.P. 49.23)

DOT National Transportation Integrated Search

2003-07-31

This Stormwater BMP Monitoring Plan details the approach to be used for monitoring : roadside ditch sediment traps located on Highway 26 in the Mt. Hood National Forest. : These sediment traps were designed and installed by ODOT for the capture of se...

A female hooded merganser swims in the waters of KSC

NASA Technical Reports Server (NTRS)

1999-01-01

A female hooded merganser swims solo in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male is distinguished by a fan-shaped, black-bordered crest and striped breast. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

Hooded mergansers swim in the waters of KSC

NASA Technical Reports Server (NTRS)

1999-01-01

A male and two female hooded mergansers swim in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male displays its distinctive fan-shaped, black-bordered crest. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

A male hooded merganser swims in the waters of KSC

NASA Technical Reports Server (NTRS)

1999-01-01

The distinctive fan-shaped, black-bordered crest and striped breast identify this hooded merganser, swimming in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

A new visual identity for the National Health Service.

PubMed

England, P

2000-03-01

The following article gives a brief overview of the new visual identity being adopted by the National Health Service in England. It looks at the thinking behind the identity, the identity's component parts and provides sources for obtaining further information on the identity's application. It is compiled from a presentation by Stephanie Hood from the corporate identity team of the NHS Executive communications unit given on 22nd October 1999 at the National Designers in Health Network seminar, Time-out '99, Sheffield. Supporting information was obtained from the NHS Communications website http:¿nww.doh.nhsweb.uk/commsnet.

Projected climate and vegetation changes and potential biotic effects for Fort Benning, Georgia; Fort Hood, Texas; and Fort Irwin, California

USGS Publications Warehouse

Shafer, S.L.; Atkins, J.; Bancroft, B.A.; Bartlein, P.J.; Lawler, J.J.; Smith, B.; Wilsey, C.B.

2012-01-01

The responses of species and ecosystems to future climate changes will present challenges for conservation and natural resource managers attempting to maintain both species populations and essential habitat. This report describes projected future changes in climate and vegetation for three study areas surrounding the military installations of Fort Benning, Georgia, Fort Hood, Texas, and Fort Irwin, California. Projected climate changes are described for the time period 2070–2099 (30-year mean) as compared to 1961–1990 (30-year mean) for each study area using data simulated by the coupled atmosphere-ocean general circulation models CCSM3, CGCM3.1(T47), and UKMO-HadCM3, run under the B1, A1B, and A2 future greenhouse gas emissions scenarios. These climate data are used to simulate potential changes in important components of the vegetation for each study area using LPJ, a dynamic global vegetation model, and LPJ-GUESS, a dynamic vegetation model optimized for regional studies. The simulated vegetation results are compared with observed vegetation data for the study areas. Potential effects of the simulated future climate and vegetation changes for species and habitats of management concern are discussed in each study area, with a particular focus on federally listed threatened and endangered species.

Owning the Journey: Using Collaborative Revisions of Little Red Riding Hood in Teaching Introduction to Literature at a Historically Black University

ERIC Educational Resources Information Center

Scott, Pauline

2012-01-01

Design and implementation of a collaborative course project, using Little Red Riding Hood (LRRH) to teach and discuss the concepts of orality, cultural legacy, archetypes, adaptation/appropriation, and social criticism in an Introduction to Literature course at Historically Black Alabama State University in Montgomery, Alabama. The student groups…

Harvest-related edge effects on prey availability and foraging of hooded warblers in a bottomland hardwood forest

Treesearch

John C. Kilgo

2005-01-01

The effects of harvest-created canopy gaps in bottomland hardwood forests on arthropod abundance and, hence, the foraging ecology of birds are poorly understood. I predicted that arthropod abundance would be high near edges of group-selection harvest gaps and lower in the surrounding forest, and that male Hooded Warblers (Wilsonia citrina) foraging...

Ecological Baseline, Fort Hood, Texas

DTIC Science & Technology

1980-08-01

cedar eTm (Uiimus crassifolia), Texas ash (Fraxinus texansis), and Texas persimmon ( Diospyros texana). Conversely, the two predominant tree species...Ilex decidua), Mex- ican buckeye (Ungnadia spjeciosa), and Texas persimmon ( Diospyros texana). Vines included greenbrier (Smilax bona-nox) and white...Hedgehey Cactus (Echinocereus sp.) has been observed on Fort Hood. Due to the brief period of flowering for this genus , the individual species were not

To Determine the Most Effective Committee System at US Darnall Army Hospital, Fort Hood, Texas

DTIC Science & Technology

1979-05-01

Department Activity, Fort Hood, Texas (Fort Sam Houston, Texas: November 1978), Finding E-l. 2Harold Koontz and Cyril O’Donnell, Principles of Management 4th...Standards. 2d Ed. Chicago: JCAH, 1976. Koontz, Harold, and O’Donnell, Cyril. Principles of Management . 4th Ed. New York: McGraw-Hill Book Company, 1978

New approach to reducing water consumption in commercial kitchen hood

NASA Astrophysics Data System (ADS)

Asmuin, N.; Pairan, M. R.

2017-09-01

Water mist sprays are used in wide range of application. However it is depend to the spray characteristic to suit the particular application. The modern commercial kitchen hood ventilation system was adopted with the water mist nozzle technology as an additional tool to increase the filtration efficiency. However, low level of filtration effectiveness and high water consumption were the major problems among the Commercial Kitchen Ventilation expert. Therefore, this study aims to develop a new mist spray technology to replacing the conventional KSJB nozzle (KSJB is a nozzle’s name). At the same time, an appropriate recommended location to install the nozzle in kitchen hood system was suggested. An extensive simulation works were carried out to observe the spray characteristics, ANSYS (FLUENT) was used for simulation wise. In the case of nozzle studies, nozzles were tested at 1 bar pressure of water and air. In comparison with conventional nozzles configuration, this new approach suggested nozzle configuration was reduce up to 50% of water consumption, which by adopted 3 numbers of nozzles instead of 6 numbers of nozzles in the commercial kitchen hood system. Therefore, this nozzle will be used in industry for their benefits of water consumption, filtration efficiency and reduced the safety limitations.

A review of Brucella infection in marine mammals, with special emphasis on Brucella pinnipedialis in the hooded seal (Cystophora cristata)

PubMed Central

2011-01-01

Brucella spp. were isolated from marine mammals for the first time in 1994. Two novel species were later included in the genus; Brucella ceti and Brucella pinnipedialis, with cetaceans and seals as their preferred hosts, respectively. Brucella spp. have since been isolated from a variety of marine mammals. Pathological changes, including lesions of the reproductive organs and associated abortions, have only been registered in cetaceans. The zoonotic potential differs among the marine mammal Brucella strains. Many techniques, both classical typing and molecular microbiology, have been utilised for characterisation of the marine mammal Brucella spp. and the change from the band-based approaches to the sequence-based approaches has greatly increased our knowledge about these strains. Several clusters have been identified within the B. ceti and B. pinnipedialis species, and multiple studies have shown that the hooded seal isolates differ from other pinniped isolates. We describe how different molecular methods have contributed to species identification and differentiation of B. ceti and B. pinnipedialis, with special emphasis on the hooded seal isolates. We further discuss the potential role of B. pinnipedialis for the declining Northwest Atlantic hooded seal population. PMID:21819589

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logue, Jennifer M; Singer, Brett

Range hood use during residential cooking is essential to maintaining good indoor air quality. However, widespread use will impact the energy demand of the U.S. housing stock. This paper describes a modeling study to determine site energy, source energy, and consumer costs for comprehensive range hood use. To estimate the energy impacts for all 113 million homes in the U.S., we extrapolated from the simulation of a representative weighted sample of 50,000 virtual homes developed from the 2009 Residential Energy Consumption Survey database. A physics-based simulation model that considered fan energy, energy to condition additional incoming air, and the effectmore » on home heating and cooling due to exhausting the heat from cooking was applied to each home. Hoods performing at a level common to hoods currently in U.S. homes would require 19?33 TWh [69?120 PJ] of site energy, 31?53 TWh [110-190 PJ] of source energy; and would cost consumers $1.2?2.1 billion (U.S.$2010) annually in the U.S. housing stock. The average household would spend less than $15 annually. Reducing required airflow, e.g. with designs that promote better pollutant capture has more energy saving potential, on average, than improving fan efficiency.« less

Correction: Hood, M.A., et al. Synthetic Strategies in the Preparation of Polymer/Inorganic Hybrid Nanoparticles. Materials 2014, 7, 4057-4087.

PubMed

Office, Materials Editorial

2014-11-24

In [1], several sentences were repeated three times on pages 4062, 4063 and 4065. In addition, many references were incorrect. The errors were introduced by the editorial office during the editing process. We apologize for this mistake and any inconvenience this may have caused to authors and readers. The corrected manuscript is given below.[...].

DISCHARGE VALVE FOR GRANULAR MATERIAL

DOEpatents

Stoughton, L.D.; Robinson, S.T.

1962-05-15

A gravity-red dispenser or valve is designed for discharging the fueled spherical elements used in a pebble bed reactor. The dispenser consists of an axially movable tube terminating under a hood having side walls with openings. When the tube is moved so that its top edge is above the tops of the side openings the elements will not flow. As the tube is moved downwardly, the elements flow into the hood through the side openings and over the top edge into the tube at an increasing rate as the tube is lowered further. The tube is spaced at all times from the hood and side walls a distance greater than the diameter of the largest element to prevent damaging of the elements when the dispenser is closed to flow. (AEC)

Manufacturing High-Quality Carbon Nanotubes at Lower Cost

NASA Technical Reports Server (NTRS)

Benavides, Jeanette M.; Lidecker, Henning

2004-01-01

A modified electric-arc welding process has been developed for manufacturing high-quality batches of carbon nanotubes at relatively low cost. Unlike in some other processes for making carbon nanotubes, metal catalysts are not used and, consequently, it is not necessary to perform extensive cleaning and purification. Also, unlike some other processes, this process is carried out at atmospheric pressure under a hood instead of in a closed, pressurized chamber; as a result, the present process can be implemented more easily. Although the present welding-based process includes an electric arc, it differs from a prior electric-arc nanotube-production process. The welding equipment used in this process includes an AC/DC welding power source with an integral helium-gas delivery system and circulating water for cooling an assembly that holds one of the welding electrodes (in this case, the anode). The cathode is a hollow carbon (optionally, graphite) rod having an outside diameter of 2 in. (approximately equal to 5.1 cm) and an inside diameter of 5/8 in. (approximately equal to 1.6 cm). The cathode is partly immersed in a water bath, such that it protrudes about 2 in. (about 5.1 cm) above the surface of the water. The bottom end of the cathode is held underwater by a clamp, to which is connected the grounding cable of the welding power source. The anode is a carbon rod 1/8 in. (approximately equal to 0.3 cm) in diameter. The assembly that holds the anode includes a thumbknob- driven mechanism for controlling the height of the anode. A small hood is placed over the anode to direct a flow of helium downward from the anode to the cathode during the welding process. A bell-shaped exhaust hood collects the helium and other gases from the process. During the process, as the anode is consumed, the height of the anode is adjusted to maintain an anode-to-cathode gap of 1 mm. The arc-welding process is continued until the upper end of the anode has been lowered to a specified height above the surface of the water bath. The process causes carbon nanotubes to form in the lowest 2.5 cm of the anode. It also causes a deposit reminiscent of a sandcastle to form on the cathode. The nanotube-containing material is harvested. The cathode and anode can then be cleaned (or the anode is replaced, if necessary) and the process repeated to produce more nanotubes. Tests have shown that the process results in approximately equal to 50-percent yield of carbon nanotubes (mostly of the single-wall type) of various sizes. Whereas the unit cost of purified single-wall carbon nanotubes produced by other process is about $1,000/g in the year 2000, it has been estimated that for the present process, the corresponding cost would be about $10/g.

The effect and importance of physical activity on behavioural and psychological symptoms in people with dementia: A systematic mixed studies review.

PubMed

Junge, Tina; Ahler, Jonas; Knudsen, Hans K; Kristensen, Hanne K

2018-01-01

Background People with dementia may benefit from the effect of physical activity on behavioural and psychological symptoms of dementia. Qualitative synthesis of the importance of physical activity might complement and help clarify quantitative findings on this topic. The purpose of this systematic mixed studies review was to evaluate findings from both quantitative and qualitative methods about the effect and importance of physical activity on behavioural and psychological symptoms of dementia in people with dementia. Methods The systematic literature search was conducted in EMBASE, CINAHL, PubMed, PEDro and PsycINFO. Inclusion criteria were: people with a light to moderate degree of dementia, interventions including physical activity and outcomes focusing on behavioural and psychological symptoms of dementia or quality of life. To assess the methodological quality of the studies, the AMSTAR and GRADE checklists were applied for the quantitative studies and the CASP qualitative checklist for the qualitative studies. Results A small reduction in depression level and improved mood were seen in some quantitative studies of multi-component physical activity interventions, including walking. Due to high heterogeneity in the quantitative studies, a single summary of the effect of physical activity on behavioural and psychological symptoms of dementia should be interpreted with some caution. Across the qualitative studies, the common themes about the importance of physical activity were its 'socially rewarding' nature, the 'benefits of walking outdoors' and its contribution to 'maintaining self-hood'. Conclusion For people with dementia, there was a small, quantitative effect of multi-component physical activity including walking, on depression level and mood. People with dementia reported the importance of walking outdoors, experiencing the social rewards of physical activity in groups, as well as physical activity were a means toward maintaining self-hood.

Influence of impact speed on head and brain injury outcome in vulnerable road user impacts to the car hood.

PubMed

Fredriksson, Rikard; Zhang, Liying; Boström, Ola; Yang, King

2007-10-01

EuroNCAP and regulations in Europe and Japan evaluate the pedestrian protection performance of cars. The test methods are similar and they all have requirements for the passive protection of the hood area at a pedestrian to car impact speed of 40 km/h. In Europe, a proposal for a second phase of the regulation mandates a brake-assist system along with passive requirements. The system assists the driver in optimizing the braking performance during panic braking, resulting in activation only when the driver brakes sufficiently. In a European study this was estimated to occur in about 50% of pedestrian accidents. A future system for brake assistance will likely include automatic braking, in response to a pre-crash sensor, to avoid or mitigate injuries of vulnerable road users. An important question is whether these systems will provide sufficient protection, or if a parallel, passive pedestrian protection system will be necessary. This study investigated the influence of impact speed on head and brain injury risk, in impacts to the carhood. One car model was chosen and a rigid adjustable plate was mounted under the hood. Free-flying headform impacts were carried out at 20 and 30 km/h head impact velocities at different under-hood distances, 20 to 100 mm; and were compared to earlier tests at 40 km/h. The EEVC WG17 adult pedestrian headform was used for non-rotating tests and a Hybrid III adult 50th percentile head was used for rotational tests where linear and rotational acceleration was measured. Data from the rotational tests was used as input to a validated finite element model of the human head, the Wayne State University Head Injury Model (WSUHIM). The model was utilized to assess brain injury risk and potential injury mechanism in a pedestrian-hood impact. Although this study showed that it was not necessarily true that a lower HIC value reduced the risk for brain injury, it appeared, for the tested car model, under-hood distances of 60 mm in 20 km/h and 80 mm in 30 km/h reduced head injury values for both skull fractures and brain injuries. An earlier study showed that the corresponding value for a test speed of 40 km/h is 100 mm. A 10 km/h reduction in head impact velocity, as in automatic braking, allowed 20 mm less under-hood clearance with maintained head protection of the vulnerable road user.

'Cobra Hoods' Coming At You

NASA Technical Reports Server (NTRS)

2004-01-01

This 3-D image taken by the left and right eyes of the panoramic camera on the Mars Exploration Rover Spirit shows the odd rock formation dubbed 'Cobra Hoods' (center). Rover scientists say this resistant rock is unlike anything they've seen on Mars so far. Spirit will investigate the rock in coming sols. The stereo pictures making up this image were captured on sol 156 (June 11, 2004).

2. Photocopy of photograph (original print located in Pope & ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Photocopy of photograph (original print located in Pope & Talbot Archives Port Gamble, WA). Unknown Photographer, Circa 1953. View of Port Gamble and surroundings, aerial shot facing west. Port Gamble Bay, townsite and millsite in foreground, Hood Canal and Olympic Mountains in the background. - Port Gamble National Historic Landmark, Bounded by Hood Canal, Port Gamble Bay, State Road 104, & Town Limits, Port Gamble, Kitsap County, WA

Benchmarks & Milestones. A Statistical Summary of Regional 2+2 Tech Prep Activities. Mt. Hood Regional Cooperative Consortium. 1992 Annual Report.

ERIC Educational Resources Information Center

Mount Hood Community Coll., Gresham, OR.

This document contains seven tables and graphs that show the extent of tech prep agreements and activities for 1992, the seventh year of the Mt. Hood Regional Cooperative Consortium. The report shows that a strong cooperative relationship has been established between and among the district high schools, the education service district, and the…

75 FR 27497 - Determination That Children's Upper Outerwear in Sizes 2T to 12 With Neck or Hood Drawstrings and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... outerwear garments in sizes 2T to 12 or the equivalent that have neck or hood drawstrings, and in sizes 2T to 16 or the equivalent that have waist or bottom drawstrings that do not meet specified criteria... percent. The corresponding reduction in the annual average number of reported non-fatal entrapments is 91...

Black on Black Crime: Hollywood's Construction of the Hood.

ERIC Educational Resources Information Center

Pierson, Eric

Most of what the world envisions of the period of westward expansion in America has been crafted through Hollywood cinema. The myths of the West are so ingrained in America's culture that they have taken on a truth all their own. In a series of recent films, which began with the release of "Boyz N the Hood," Hollywood is at it again, presenting…

Formation of a Bright Polar Hood over the Summer North Pole of Saturn in 2016

NASA Astrophysics Data System (ADS)

Sayanagi, Kunio M.; Blalock, John J.; Ingersoll, Andrew P.; Dyudina, Ulyana A.; Ewald, Shawn P.

2016-10-01

We report that a bright polar hood has formed over the north pole of Saturn, seen first in images captured by the Cassini ISS camera in 2016. When the north pole was observed during the previous period of Cassini spacecraft's high-inclination orbits in 2012-2013, the concentration of light-scattering aerosols within 2-degree latitude of the north pole appeared to be less than that of the surrounding region, and appeared as a dark hole in all ISS filters, in particular in the shorter wavelength filters BL1 (460 nm), and VIO (420 nm). The north pole's appearance in 2012 was in contrast to that of the south pole in 2007, when the south pole had a bright polar hood in those short wavelengths; the south pole appeared dark in all other ISS filters in 2007. The difference between the south pole in 2007 and the north pole in 2012 was interpreted to be seasonal; in 2007, Saturn was approaching the equinox of 2009 and the south pole had been continuously illuminated since the previous equinox in 1995. In 2012, the north pole had been illuminated for only ~3 years after the long winter polar night. The bright hood over the summer south pole in 2007 was hypothesized to consist of aerosols produced by ultraviolet photodissociation of hydrocarbon molecules. Fletcher et al (2015) predicted that a similar bright hood should form over the north pole as Saturn approaches the 2017 solstice. In 2016, the Cassini spacecraft raised its orbital inclination again in preparation for its Grande Finale phase of the mission, from where it has a good view of the north pole. New images captured in 2016 show that the north pole has developed a bright polar hood. We present new images of the north polar region captured in 2016 that show the north pole, and other seasonally evolving high-latitude features including the northern hexagon. Our research has been supported by the Cassini Project, NASA grants OPR NNX11AM45G, CDAPS NNX15AD33G PATM NNX14AK07G, and NSF grant AAG 1212216.

Effectiveness of two nitrous oxide scavenging nasal hoods during routine pediatric dental treatment.

PubMed

Chrysikopoulou, Aikaterini; Matheson, Pamela; Milles, Maano; Shey, Zia; Houpt, Milton

2006-01-01

This study compared the effectiveness of 2 nasal hoods (Porter/Brown and Accutron) in reducing waste nitrous oxide gas during conscious sedation for routine pediatric dental treatment. Thirty children, ages 3 to 8 years (mean=5.4 +/- 1.2 years), participated in this study. Fifteen randomly selected children started with the Porter/Brown mask, which was then switched to the Accutron mask, and the other 15 children used the reverse order of masks. Four measurements of ambient nitrous oxide were recorded with a Miran 205B Portable Ambient Air Analyzer 5 minutes after each of the following: (1) administration of nitrous oxide; (2) placement of the rubber dam; (3) change of the nasal hood; and (4) reduction of the vacuum. Samples were taken 8 inches above the nose of the patient and in the room 5 feet away from the patient. Nitrous oxide levels were significantly lower (P<.05) with the Porter/Brown system (31 +/- 40 ppm for the patient and 8 +/- 10 ppm for the room) compared with the Accutron system (375 +/- 94 ppm for the patient and 101 +/- 37 ppm for the room). When the suction was reduced, there was an increase in nitrous oxide levels with the Porter/Brown nasal hood (169 +/- 112 ppm for the patient and 28 +/- 18 ppm for the room), whereas the levels with the Accutron nasal hood remained high (368 +/- 107 ppm for the patient and 121 +/- 50 ppm for the room). This study demonstrated that removal of waste nitrous oxide was greater with the Porter/Brown device and that recommended suction levels must be used for optimum effectiveness.

Geothermal observation wells, Mt. Hood, Oregon. Final report, October 4, 1977-July 9, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, W.F.; Meyer, H.J.

1979-11-01

Exploration drilling operations were conducted which included the deepening of an existing hole, designated as Old Maid Flat No. 1, from 1850 ft (564 m) to 4002 (1220 m) on the western approaches to Mt. Hood and the drilling of three new holes ranging from 940 ft (287 m) to 1340 ft (409 m). The Clear Fork hole, located in Old Maid Flat, was drilled to 1320 ft (402 m). The Zigzag hole was drilled to 940 ft (287 m) at the southwestern base of Mt. Hood in the Zigzag River valley. The remaining hole was drilled on the Timberlinemore » Lodge grounds which is on the south flank of Mt. Hood at an elevation of about 6000 ft (1829 m) above sea level. The deepening project designated as Old Maid Flat No. 1 encountered a maximum bottom hole temperature of about 180/sup 0/F (82/sup 0/C) and is to this date the deepest exploratory hole in the Mt. Hood vicinity. No significant drilling problems were encountered. The Clear Fork and Zigzag River holes were completed without significant problems. The Timberline Lodge hole encountered severe drilling conditions, including unconsolidated formations. Two strings of tools were left in the hole from structural collapse of the hole. The hole was scheduled as a 2000 ft (610 m) test. Drilling did not proceed beyond 1350 ft (412 m) and due to junk it was unobstructed to a depth of 838 ft (255 m). Observation pipe was installed to 735 ft (224 m) due to further disintegration of the hole. The work was prematurely terminated due to weather conditions.« less

Impact of the CO2 and H2O clouds of the Martian polar hood on the polar energy balance

NASA Technical Reports Server (NTRS)

Forget, Francois; Pollack, James B.

1993-01-01

Clouds covering extensive areas above the martian polar caps have regularly been observed during the fall and winter seasons of each hemisphere. These 'polar hoods' are thought to be made of H2O and CO2. In particular, the very cold temperatures observed during the polar night by Viking and Mariner 9 around both poles have been identified as CO2 clouds and several models, including GCM, have indicated that the CO2 can condense in the atmosphere at all polar latitudes. Estimating the impact of the polar hood clouds on the energy balance of the polar regions is necessary to model the CO2 cycle and address puzzling problems like the polar caps assymetry. For example, by altering the thermal radiation emitted to space, CO2 clouds alter the amount of CO2 that condenses during the fall and winter season. The complete set of Viking IRTM data was analyzed to define the spatial and temporal properties of the polar hoods, and how their presence affects the energy radiated by the atmosphere/caps system to space was estimated. The IRTM observations provide good spatial and temporal converage of both polar regions during fall, winter, and spring, when a combination of the first and the second Viking year is used. Only the IRTM brightness temperatures at 11, 15, and 20 microns are reliable at martian polar temperatures. To recover the integrated thermal fluxes from the IRTM data, a simple model of the polar hood, thought to consist of 'warm' H2O clouds lying above colder and opaque CO2 clouds was developed. Such a model is based on the analysis of the IRIS spectra, and is consistent with the IRTM data used.

Recent eruptive history of Mount Hood, Oregon, and potential hazards from future eruptions

USGS Publications Warehouse

Crandell, Dwight Raymond

1980-01-01

Each of three major eruptive periods at Mount Hood (12,000-15,000(?), 1,500-1,800, and 200-300 years ago) produced dacite domes, pyroclastic flows, and mudflows, but virtually no pumice. Most of the fine lithic ash that mantles the slopes of the volcano and the adjacent mountains fell from ash clouds that accompanied the pyroclastic flows. Widely scattered pumice lapilli that are present at the ground surface on the south, east, and north sides of Mount Hood may have been erupted during the mid-1800's, when the last known activity of the volcano occurred. The geologically recent history of Mount Hood suggests that the most likely eruptive event in the future will be the formation of another dome, probably within the present south-facing crater. The principal hazards that could accompany dome formation include pyroclastic flows and mudflows moving from the upper slopes of the volcano down the floors of valleys. Ash clouds which accompany pyroclastic flows may deposit as much as a meter of fine ash close to their source, and as much as 20 centimeters at a distance of 11 kilometers downwind from the pyroclastic flows. Other hazards that could result from such eruptions include laterally directed explosive blasts that could propel rock fragments outward from the sides of a dome at high speed, and toxic volcanic gases. The scarcity of pumiceous ash erupted during the last 15,000 years suggests that explosive pumice eruptions are not a major hazard at Mount Hood; thus, there seems to be little danger that such an eruption will significantly affect the Portland (Oregon) metropolitan area in the near future.

Magnetic Anomalies Within Lunar Impact Basins: Constraints on the History of the Lunar Dynamo

NASA Astrophysics Data System (ADS)

Richmond, N. C.; Hood, L. L.

2011-12-01

Previous work has shown that lunar crustal magnetization has a combination of origins including shock remanent magnetization in transient magnetic fields and thermoremanent magnetization in a steady core dynamo magnetic field (e.g., Hood and Artemieva, Icarus, 2008; Richmond and Hood, JGR, 2008; Garrick-Bethell et al., Science, 2009; Hood, Icarus, 2011). In particular, magnetic anomalies within the interiors of lunar impact basins and large craters provide a potentially valuable means of constraining the history of the former dynamo (Halekas et al., MAPS, 2003; Hood, 2011). These anomalies likely have a thermoremanent origin owing to high subsurface temperatures reached at the time of impact and therefore require a long-lived, steady magnetic field to explain their magnetization. Central anomalies have previously been confirmed to be present using Lunar Prospector magnetometer (LP MAG) data within several Nectarian-aged basins (Moscoviense, Mendel-Rydberg, Crisium, and Humboldtianum), implying that a dynamo existed during this lunar epoch (Hood, 2011). Here, we further analyze low altitude LP MAG data for several additional basins, ranging in age from Nectarian to Imbrian. Results indicate that magnetic anomalies with a probable basin-related origin are present within at least two additional Nectarian-aged basins (Serenitatis and Humorum) and one Imbrian-aged basin (Schrodinger). No discernible anomalies are present within the largest Imbrian-aged basins, Imbrium and Orientale. While there is uncertainty regarding the age of the Schrodinger basin, it has been reported to be slightly more recent than Imbrium (Wilhelms, 1984). Our initial interpretation is therefore that a dynamo likely existed during the Imbrian epoch. The absence of anomalies within Imbrium and Orientale can be explained by insufficient conditions for acquisition of strong magnetization (e.g., inadequate concentrations of efficient remanence carriers) following these relatively large impacts.

Columbia/Willamette Skill Builders Consortium. Final Performance Report. Appendix 5B Anodizing Inc. (Aluminum Extrusion Manufacturing). Basic Measurement Math. Instructors' Reports and Sample Curriculum Materials.

ERIC Educational Resources Information Center

Taylor, Marjorie; And Others

Anodizing, Inc., Teamsters Local 162, and Mt. Hood Community College (Oregon) developed a workplace literacy program for workers at Anodizing. These workers did not have the basic skill competencies to benefit from company training efforts in statistical process control and quality assurance and were not able to advance to lead and supervisory…

Magnetic Resonance Imaging of Heart Failure Using a Swine Model

DTIC Science & Technology

2011-03-21

Defense or the Uniformed Services University of the Health Sciences. / Ma een N. Hood, MR, RN, RT (R)(MR), FSMRT Gr duate School of Nursing U iformed...2652710212087 License date Apr 19, 2011 Licensed content publisher Wolters Kluwer Health Licensed content publication Journal of Cardiovascular Nursing ...Licensed content title A Review of Cohort Study Design for Cardiovascular Nursing Research Licensed content author Maureen Hood Licensed content date Jan

Statistical Analysis of Fort Hood Quality-of-Life Questionnaire.

DTIC Science & Technology

1978-10-01

The objective of this work was to provide supplementary data analyses of data abstracted from the Quality - of - Life questionnaire developed earlier at...the Fort Hood Field Unit at the request of Headquarters, TRADOC Combined Arms Test Activity (TCATA). The Quality - of - Life questionnaire data were...to the Quality - of - Life questionnaire. These data were then intensively analyzed using analysis of variance and correlational techniques. The results

Insider Threats: DOD Should Improve Information Sharing and Oversight to Protect U.S. Installations

DTIC Science & Technology

2015-07-01

violence toward others in the workplace , DOD closed the recommendation as implemented by issuing a policy on workplace violence prevention and response in...examination of recommendations resulting from the Fort Hood independent review related to workplace violence and focused on the military services...and (3) implemented recommendations from the official reviews of the 2009 Fort Hood and 2013 Washington Navy Yard shootings. GAO reviewed official

Hood River Passive House, Hood River, Oregon (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-02-01

The Hood River Passive Project was developed by Root Design Build of Hood River Oregon using the Passive House Planning Package (PHPP) to meet all of the requirements for certification under the European Passive House standards. The Passive House design approach has been gaining momentum among residential designers for custom homes and BEopt modeling indicates that these designs may actually exceed the goal of the U.S. Department of Energy's (DOE) Building America program to "reduce home energy use by 30%-50%" (compared to 2009 energy codes for new homes). This report documents the short term test results of the Shift Housemore » and compares the results of PHPP and BEopt modeling of the project. The design includes high R-Value assemblies, extremely tight construction, high performance doors and windows, solar thermal DHW, heat recovery ventilation, moveable external shutters and a high performance ductless mini-split heat pump. Cost analysis indicates that many of the measures implemented in this project did not meet the BA standard for cost neutrality. The ductless mini-split heat pump, lighting and advanced air leakage control were the most cost effective measures. The future challenge will be to value engineer the performance levels indicated here in modeling using production based practices at a significantly lower cost.« less

Volcano hazards in the Mount Hood region, Oregon

USGS Publications Warehouse

Scott, W.E.; Pierson, T.C.; Schilling, S.P.; Costa, J.E.; Gardner, C.A.; Vallance, J.W.; Major, J.J.

1997-01-01

Mount Hood is a potentially active volcano close to rapidly growing communities and recreation areas. The most likely widespread and hazardous consequence of a future eruption will be for lahars (rapidly moving mudflows) to sweep down the entire length of the Sandy (including the Zigzag) and White River valleys. Lahars can be generated by hot volcanic flows that melt snow and ice or by landslides from the steep upper flanks of the volcano. Structures close to river channels are at greatest risk of being destroyed. The degree of hazard decreases as height above a channel increases, but large lahars can affect areas more than 30 vertical meters (100 vertical feet) above river beds. The probability of eruption-generated lahars affecting the Sandy and White River valleys is 1-in-15 to l-in-30 during the next 30 years, whereas the probability of extensive areas in the Hood River Valley being affected by lahars is about ten times less. The accompanying volcano-hazard-zonation map outlines areas potentially at risk and shows that some areas may be too close for a reasonable chance of escape or survival during an eruption. Future eruptions of Mount Hood could seriously disrupt transportation (air, river, and highway), some municipal water supplies, and hydroelectric power generation and transmission in northwest Oregon and southwest Washington.

Hood River Fish Habitat Project; Confederated Tribes of the Warm Springs Reservation of Oregon, Annual Report 2001-2002.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaivoda, Alexis

2003-11-01

This report summarizes the project implementation and monitoring of all habitat activities that occurred over Fiscal Year 2002 (FY 02). Some of the objectives in the corresponding statement of work for this contract were not completed within FY 02. A description of the progress during FY 02 and reasoning for deviation from the original tasks and timeline are given. OBJECTIVE 1--Provide coordination of all activities, administrative oversight and assist in project implementation and monitoring activities. Administration oversight and coordination of the habitat statement of work, budget, subcontracts and personnel was provided. OBJECTIVE 2--Develop, coordinate, and implement the Hood River Fishmore » Habitat Protection, Restoration, and Monitoring Plan. The Hood River Fish Habitat Protection, Restoration, and Monitoring Plan was completed in 2000 (Coccoli et al., 2000). This document is utilized for many purposes including: drafting the Watershed Action Plan, ranking projects for funding, and prioritizing projects to target in the future. This document was updated and revised to reflect changes to fish habitat and needs in the Hood River basin based upon other documents and actions taken in the basin. OBJECTIVE 3--Assist Middle Fork Irrigation District in developing an alternative irrigation water source on Evans Creek (Hutson pond and Evans Creek diversion), eliminating the need for irrigation diversion dams which happen to be partial fish barriers. Upon completion, this project will restore 2.5 miles of access for winter steelhead, coho salmon, and resident trout habitat. This objective was revised and included in the FY 03 Statement of Work for Project No. 1998-021-00. During FY 02 the final engineering was completed on this project. However, due to a lengthy permitting process and NMFS consultation, this project was inadvertently delayed. Project completion is expected in July 2003. OBJECTIVE 4--Assist the Farmers Irrigation District (FID) in construction and installation of a new fish screen and bypass system on the mainstem Hood River (Farmers Canal). Final engineering and design for the horizontal screen was completed during the winter of 2001. In December 2001 and January 2002, the concrete work was completed and the head gates were mounted. During the spring the secondary head level control gates were installed. In September 2002, the jersey barriers and vortex tubes were installed. These are located upstream of the old drum screen, and are the primary means of dealing with bedload and suspended load from the diversion. The screen surface was also installed in September 2002 and the system accommodated water soon after. Monitoring of these structures in regards to efficiency and possible effects to fish migration is scheduled to occur in spring 2003. The transition from the old canal to the new screen is smooth and currently does not present any problems. The old drum screen is going to remain in place until all the biological and hydrological monitoring is complete to ensure compliance and satisfaction of all agencies involved. OBJECTIVE 5--Assist the East Fork Irrigation District (EFID) in final engineering design and construction of the Central Lateral Canal upgrade and invert siphon. This objective was revised and included in the FY 03 Statement of Work for Project No. 1998-021-00. During FY 02, a significant portion of the engineering and design work was completed on the EFID Central Lateral Canal upgrade and invert siphon. There were some changes in canal alignment that required further design work and easement acquisition. Time was also spent looking for matching funds and securing a loan by the EFID. Construction initiation is now scheduled for summer 2003. OBJECTIVE 6--Modify and/or eliminate five culverts, three on Baldwin Creek, one on Graham Creek, and one on Evans Creek, which function as barriers to upstream and downstream fish migration. This objective was revised and included in the FY 03 Statement of Work for Project No. 1998-021-00. There are only two culverts on Baldwin Creek that will be eliminated or modified. Work was initiated on the removal of one of these culverts, and the replacement of the other. The landowner was agreeable and NEPA was initiated. The modification/elimination of these culverts is scheduled for FY 04. The culvert on Graham Creek is a county road, and will be addressed as a fish passage barrier by Hood River County. The Evans Creek culvert was prepared for modification in FY 02, however due to a lengthy permitting process the instream work period was missed. This project is on the schedule for the instream work period of 2003. OBJECTIVE 7--Construct riparian fence to stabilize and improve the riparian zone along the East Fork Hood River and tributaries. Two riparian fencing projects were completed on East Fork Hood River tributaries. The first was on Baldwin Creek, and the second was on Shelly Creek.« less

KSC-06pd2669

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery is bathed in light on Launch Pad 39B after rollback of the rotating service structure after midnight. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/George Shelton

KSC-06pd2668

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery is bathed in light on Launch Pad 39B after rollback of the rotating service structure after midnight. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/George Shelton

A Cost Analysis for Life-Cycle Preventive Maintenance, Administrative Storage, and Condition-Based Maintenance for the U.S. Marine Corps Medium Tactical Vehicle Replacement

DTIC Science & Technology

2013-12-04

Table 3. Monthly PMCS Actions and Labor Required Task Hours Task Hours Inspect cab and hood 1.0 Inspect turbocharger 0.5 Inspect fuel tank 0.1 Inspect...Annual PMCS Actions and Labor Required Task Hours Task Hours Inspect cab and hood 1.0 Air intake system 0.2 Inspect fuel Tank 0.1 Inspect turbocharger

Corrosion-Mitigating, Bondable, Fluorinated Barrier Coating for Anodized Magnesium

DTIC Science & Technology

2016-05-01

transport the precursor vapor throughout the study was set at 9,500 sccm. The setup also incorporated a 38- × 54- × 0.6-cm stainless steel moveable...evaporated and that silane crosslinking had occurred, samples were allowed to sit uncovered in a fume hood for 1 h prior to electrochemical...measurement, contact-angle measurement, or plasma treatment. Samples were stored in a fume hood for approximately 24 h before applying an epoxy topcoat

Environmental Assessment for Ongoing and Future Operations at U.S. Navy Dabob Bay and Hood Canal Military Operating Areas

DTIC Science & Technology

2002-05-01

well as being cultivated in aquaculture operations in Puget Sound, including Hood Canal and Dabob Bay (Figure 3.4-2). Pacific oysters (Crassostrea...gigas) are widely cultivated in aquaculture operations in Puget Sound. Commercial oyster beds exist in Dabob Bay, mostly at the north end. Dabob Bay... Ecotoxicology of metals in aquatic sediments: binding and release, bioavailability, risk assessment, and remediation. Canadian Journal of

Effects of drying on nitrification activity in zeoponic medium used for long-term space missions

NASA Technical Reports Server (NTRS)

McGilloway, R. L.; Weaver, R. W.

2004-01-01

One component of a proposed life support system is the use of zeoponic substrates, which slowly release NH4+ into "soil" solution, for the production of plants. Nitrifying bacteria that convert NH4+ to NO3- are among the important microbial components of these systems. Survival of nitrifying bacteria in dry zeoponic substrates is needed, because the substrate would likely be stored in an air-dry state between croppings. Substrate was enriched for nitrifying bacteria and allowed to air-dry in a laminar flow hood. Stored substrate was analyzed for nitrifier survivability by measuring nitrifier activity at the beginning, 3 days, 1, 2, and 3 weeks. After rewetting, activity was approximately 9 micrograms N g-1 h-1 regardless of storage time. Nitrification rates did not decrease during storage. It seems unlikely that drying between plantings would result in practical reductions in nitrification, and reinoculation with nitrifying bacteria would not be necessary.

Preliminary Geologic Map of the Mount Hood 30- by 60-minute Quadrangle, Northern Cascade Range, Oregon

USGS Publications Warehouse

Sherrod, David R.; Scott, William E.

1995-01-01

This map shows the geology of the central and eastern parts of the Cascade Range in northern Oregon. The Quaternary andesitic stratovolcano of Mount Hood dominates the northwest quarter of the quadrangle, but nearly the entire area is underlain by arc-related volcanic and volcaniclastic rocks of the Cascade Range. Most stratigraphic units were emplaced since middle Miocene time, and all are Oligocene or younger. Despite the proximity of the map area to the Portland metropolitan area, large parts remained virtually unstudied or known only from limited reconnaissance until the late 1970s. A notable exception is the area surrounding Mount Hood, where mapping and chemical analyses by Wise (1969) provided a framework for geologic interpretation. Mapping since 1975 was conducted first to understand the stratigraphy and structure of the Columbia River Basalt Group (Anderson, 1978; Vogt, 1981; J.L. Anderson, in Swanson and others, 1981; Vandiver-Powell, 1978; Burck, 1986) and later to examine the geothermal potential of Mount Hood (Priest and others, 1982). Additional mapping was completed in 1985 for a geologic map of the Cascade Range in Oregon (Sherrod and Smith, 1989). From 1987 to 1990, detailed mapping was conducted in three 15-minute quadrangles on a limited basis (D.R. Sherrod, unpublished mapping) (see fig. 1 for index to mapping). An ongoing volcanic hazards study of Mount Hood by the U.S. Geological Survey (Scott and others, 1994) has provided the catalyst for completing the geologic map of the Mount Hood 30-minute by 60-minute quadrangle. As of June 1994, only two broad areas still remain largely unmapped. One of these areas, labeled 'unmapped' on the geologic map, lies in the Salmon River valley south of Zigzag along the west margin of the quadrangle. Although strata of the Columbia River Basalt Group in the Salmon River valley were mapped in detail by Burck (1986), the overlying middle and upper(?) Miocene lava flows, volcaniclastic strata, and intrusions have never been studied. The other poorly known area, the Mutton Mountains in the southeastern part of the map area, consists of Oligocene and lower Miocene volcanic and volcaniclastic rocks. Overlying lava flows of the Columbia River Basalt Group were mapped in some detail by Anderson (in Swanson and others, 1981).

Selected KSC Applied Physics Lab Responses to Shuttle Processing Measurement Requests

NASA Technical Reports Server (NTRS)

Youngquist, Robert C.

2010-01-01

The KSC Applied Physics Lab has been supporting Shuttle Ground Processing for over 20 years by solving problems brought to us by Shuttle personnel. Roughly half of the requests to our lab have been to find ways to make measurements, or to improve on an existing measurement process. This talk will briefly cover: 1) Centering the aft end of the External Tank between the Solid Rocket Boosters; 2) Positioning the GOX Vent Hood over the External Tank; 3) Remote Measurements of External Tank Damage; 4) Strain Measurement in the Orbiter Sling; and 5) Over-center Distance Measurement in an Over-center Mechanism.

Comparison of Portable Crewmember Protective Breathing Equipment (CPBE) Designs

DTIC Science & Technology

1993-04-01

lower posterior portion of the Equipment: The ground level tests were conducted in hood, as is the lithium hydroxide CO2 scrubber . the Civil Aeromedical...equipped with a medical monitoring venturi nozzle. The venturi effect causes the atmo- system was used to effect the required subject workload. sphere...inside the hood to be drawn across the CO2 Two Perkin-Elmer medical gas analyzers were used to scrubber , which emits its effluent back into the

Historical Research of 401 Sites at Fort Hood, Bell and Voryell Counties, Texas

DTIC Science & Technology

2000-08-01

CORYELL COUNTIES, TEXAS by Russell B. Ward Marie E. Blake Amy E. Dase and Martha Doty Freeman with contributions by Jennifer A. Stabler and Kay Hindes...project. Jennifer A. Stabler, formerly of Fort Hood, and Kay Hindes, consulting historian, contributed research efforts and initial drafts of some site... Jennifer Occasionally, failure of purchasers to record Stabler prior to 1999. For the most part, deeds with the county clerk created a break in however, the

The Response of a Branch of Puget Sound, Washington to the 2014 North Pacific Warm Anomaly

NASA Astrophysics Data System (ADS)

Mickett, J.; Newton, J.; Devol, A.; Krembs, C.; Ruef, W.

2016-02-01

The flow of the unprecedentedly-warm upper-ocean North Pacific "Blob" water into Puget Sound, Washington, caused local extreme water property anomalies that extended from the arrival of the water inshore in the fall of 2014 through 2015. Here we report on moored and seaplane observations from Hood Canal, a branch of Puget Sound, where temperature was more than 2σ above climatology for much of the year with maximum temperature anomalies at depth and at the surface +2.5 °C and +7 °C respectively. The low density of the oceanic warm "Blob" water resulted in weak deep water flushing in Hood Canal in the fall of 2014, which combined with a lack of wintertime flushing to result in anomalously-low dissolved oxygen (DO) concentrations at depth. Late-summer 2015 DO values were the lowest in a decade of mooring observations and more than 2σ below climatology. The anomalously low density of the deep basin water allowed a very early onset of the annually-occurring, late-summer intrusion, which first entered Hood Canal at the end of July compared to the usual arrival in early to mid-September. In late August this intrusion conspired with an early fall storm to lift the very low DO deep water to surface at the south end of Hood Canal, causing a significant fish kill event.

Comparisons between Shikoro-type helmet with no hood and typical fire protective helmets with hood in a hot and humid environment.

PubMed

Baek, Yoon Jeong; Jung, Dahee; Son, Su-Young; Lee, Joo-Young

2018-03-01

The purpose of this study was to evaluate physiological and subjective responses while wearing the Shikoro-type helmet for firefighters when compared to typical helmets. Eight firefighters conducted a 30-min exercise at a 5 km h -1 in three helmet conditions at an air temperature of 32 °C with 70%RH. The results showed that no significant differences in rectal, mean skin temperature and physiological strain index among the three conditions were found during exercise and recovery. Skin temperatures on the cheek, ear and neck during exercise were significantly lower for the Shikoro-type condition (p < 0.05), but forehead temperature was greater for the Shikoro-type helmet when compared to the other conditions (p < 0.05). Statistical differences in thermal sensation and thermal comfort for overall and local body regions were not found among the three conditions. These results imply that the Shikoro-type helmet had local advantages in reducing skin temperatures on the face and neck. Practitioner Summary: Firefighters wear their helmet with its hood to protect the head and neck but a Shikoro type helmet has no fire protective hood. This study aimed to evaluate the comfort function of Shikoro helmet along with typical helmets. The results demonstrated thermal benefits of the Shikoro helmet on the head.

KENNEDY SPACE CENTER, FLA. -- Three male and one female hooded mergansers swim in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

NASA Image and Video Library

2004-01-08

KENNEDY SPACE CENTER, FLA. -- Three male and one female hooded mergansers swim in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

NASA Helps Keep the Light Burning for the Saturn Car Company

NASA Technical Reports Server (NTRS)

2003-01-01

The Saturn Electronics & Engineering, Inc. (Saturn) facility in Marks, Miss., that produces lamp assemblies was experiencing itermittent problems with its automotive under the hood lamps. After numerous testing and engineering efforts, technicians could not pin down the root of the problem. So Saturn contacted the NASA Technology Assistance Program (TAP) at Stennis Space Center. The Marks production facility had been experiencing intermittent problems with under the hood lamp assemblies for some time. The failure rate, at 2 percent, was unacceptable. Every effort was made to identify the problem so that corrective action could be put in place. The problem was investigated and researched by Saturn's engineering department. In addition, Saturn brought in several independent testing laboratories. Other measures included examining the switch component suppliers and auditing them for compliance to the design specifications and for surface contaminants. All attempts to identify the factors responsible for the failures were inconclusive. In an effort to get to the root of the problem, and at the recommendation of the Mississippi Department of Economic Development, Saturn contacted the NASA TAP at Stennis. The NASA Materials and Contamination Laboratory, with assistance from the Stennis Prototype Laboratory, conducted a materials evaluation study on the switch components. The laboratory findings showed the failures were caused by a build-up of carbon-based contaminants on the switch components. Saturn Electronics & Engineering, Inc., is a minority-owned provider of contract manufacturing services to a diverse global marketplace. Saturn operates manufacturing facilities globally serving the North American, European, and Asian markets. Saturn's production facility in Marks, Mississippi, produces more than 1,000,000 lamps and switches monthly. "Since the NASA recommendations were implemented, our internal failure rate for intermittency has dropped to less than .02 percent. Most importantly, we restored our high-level of customer satisfaction. Stennis provided an invaluable service to our business," Patrick said. Both NASA and Saturn were pleased with the results form this technical assistance project. The Technology Assistance Program at Stennis makes available to the public NASA technical expertise and access to lab facilities. This project provided both services with a positive outcome.

Hydrogen Supply System for Small PEM Fuel Cell Stacks

DTIC Science & Technology

1997-07-01

a trivalent metal capable of forming complex hydrides such as Al or B. m is the valence of Z and n is the valence of X For example, let X be chlorine...been taken, the reactor is opened into a fume hood. After the reactor reaches atmospheric pressure, it is re-pressurized with nitrogen and bled again...into the fume hood to remove the remaining vapors before it is opened. After the fumes have dissipated, the endcap is loosened and removed. The spent

Longitudinal Study of Human Hearings: Its Relationship to Noise and Other Factors. 3. Results from the First Five Years

DTIC Science & Technology

1982-09-01

increases in blood pressure with whole body vibration (Hood and Higgins , 1965) and that vaso- constriction occurs when adolescents are exposed to noise...nella diversa concentrazione di melanina nella stria vascolare. Boll. Soc. Med. Chir ., Pavia, 79:1199-1295. Bordley, J. E., and W. G. Hardy 1955 The...Acoust. Soc. Am., 27:1186-1194. Hood, W. B., Jr., and L. S. Higgins 1965 Circulatory and respiratory effects of whole-body vibration in anesthetized

Advanced Techniques in Crash Impact Protection and Emergency Egress from Air Transport Aircraft

DTIC Science & Technology

1976-06-01

4.5.1 Integrated Upper Torso Restraint 70 4.5.1.1 NASA Ames Integrated System 71 4.5.1.2 Chrysler Corporate System 74 4.5.2 Y-Yoke Inertia Reel...3. International Husky Corporation /Boeing future concept lifting-body air freighter [Aviation Week, 1974 (32)] 4 4. Possible configuration of...39 24. Demonstration of passenger donning Schjeldahl "S" model "safety" hood in Chrysler Corporation Gulfstream. This smoke hood is presently in use

Development of Predictive Equations Based on Pavement Condition Index Data

DTIC Science & Technology

1992-03-01

WA 90 4 82 8 6. OLYMPIA, WA (R2) 89 8 85 11 7. PULLMAN, WA (R2) 70 18 48 21 8. HOOD RIVER , OR (R1) 96 1 92 5 9. HOOD RIVER (R2) 95 1 90 5 Notes: Where...90- 1991 38 PACKWOODAP Ri 1975 94 - 1988 90 - 1991 1.33 3 9 PANGBORN FIELD ( WENATCHEE ) Ri 1947 63 - 1988 N/A R2 1947 66 - 1988 N/A R4 1947 55 - 1988

Biological Assessment of the Effects of Military Associated Activities on Endangered Species at Fort Hood, Texas

DTIC Science & Technology

1992-12-01

monographing the genus Croton. Dr. Joe Allen Farmer published a dissertation on the species in 1962. Studies on the Fort Hood population have begun under...Woodhouse, S.W., "Descriptions of New Species of the Genus Vireo, VieilL, and Zonorrichia, Swains," Proceeding of the Academy of Natural Sciences of...sinuata Skunkbush Saumac Rhus aroma tica Texas Oak Quercus texazza Texas Persimmon, Diospyros texana Texas Ashe Fraxinus texensis Virginia Creeper Paz

Labia Minora, Labia Majora, and Clitoral Hood Alteration: Experience-Based Recommendations.

PubMed

Hunter, John G

2016-01-01

Aesthetic alteration of the genitalia is increasingly sought by women unhappy with the size, shape, and appearance of their vulva. Although the labia minora are usually the focus of concern, the entire anatomic region--minora, labia majora, clitoral hood, perineum, and mons pubis--should be evaluated in a preoperative assessment of women seeking labiaplasty. Labiaplasty is associated with high patient satisfaction and low complication rates. The three basic labia minora reduction techniques--edge excision, wedge excision, and central deepithelialization--as well as their advantages and disadvantages are discussed to assist the surgeon in tailoring technique selection to individual genital anatomy and aesthetic desires. We present key points of the preoperative anatomic evaluation, technique selection, operative risks, perioperative care, and potential complications for labia minora, labia majora, and clitoral hood alterations, based on a large operative experience. Labiaplasty competency should be part of the skill set of all plastic surgeons. © 2015 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Liquid-cooled clothing for hot mine rescue work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-04-01

To prevent exhaustion caused by thermal stress, a rescuer can wear a liquid-cooled hood and vest which absorbs heat, thereby reducing the heat-induced strain on the rescuer's heart and circulatory system. Liquid coolant is continuously circulated through a self-contained system in which the coolant is chilled by a heat sink on the wearer's belt. Cooling duration is approximately 40 minutes when both the hood and vest are worn. Tests were conducted at NASA's Ames Research Center to evaluate the effectiveness of this system. When using the hood and vest with a refrigerated water supply, thermal strain on the wearer wasmore » cut in half and the heart rate was reduced by 30 to 50 beats per minute. Body temperature was significantly lowered, about 0.65/sup 0/C. This system can increase safety for rescue workers who must work in a hot environment, especially when they are not acclimated to high temperaures. Laboratory tests also were conducted using members of a mine rescue team.« less

Pesticide deposition on coveralls during vineyard applications.

PubMed

Coffman, C W; Obendorf, S K; Derksen, R C

1999-08-01

Deposition of pesticide on the clothing of the applicator was studied in a commercial vineyard using two different application technologies. A typical air-assisted sprayer with centrifugal fans delivered a concentrated spray. A tunnel or hooded sprayer was used at two carrier rates-high volume, low concentration versus low volume, high concentration-to apply Dithane M-45, an agricultural fungicide, at 3,375 g/ha on a light to medium density canopy. Deposition of pesticide was on the coveralls worn by the operator for all applications with a deposition range of 0.43 to 0.63 ng/cm2. The deposition on the clothing was higher for the air-assist sprayer than for the hooded sprayer. However, reducing the volume of water in the non-air assist hooded sprayer offered no advantage in terms of decreasing operator exposure. While the deposition of pesticide on the coveralls of the applicator was fairly uniformly distributed on the garment surface, the neck, shoulder, and upper right arm of our right-handed operator had the highest amount of pesticide deposit and the lower left quadrant of the garment had the lowest deposition. Results of this study indicate that vineyard applicator exposure can be reduced by use of the hooded non-air assisted sprayer and that extra protection is needed in the region of the neck, shoulder, and arm, and attention to the habits of the tractor driver is required.http://link.springer-ny. com/link/service/journals/00244/bibs/37n2p273.html

Capture efficiency of cooking-related fine and ultrafine particles by residential exhaust hoods.

PubMed

Lunden, M M; Delp, W W; Singer, B C

2015-02-01

Effective exhaust hoods can mitigate the indoor air quality impacts of pollutant emissions from residential cooking. This study reports capture efficiencies (CE) measured for cooking-generated particles for scripted cooking procedures in a 121-m3 chamber with kitchenette. CEs also were measured for burner produced CO2 during cooking and separately for pots and pans containing water. The study used four exhaust hoods previously tested by Delp and Singer (Environ. Sci. Technol., 2012, 46, 6167-6173). For pan-frying a hamburger over medium heat on the back burner, CEs for particles were similar to those for burner produced CO2 and mostly above 80%. For stir-frying green beans in a wok (high heat, front burner), CEs for burner CO2 during cooking varied by hood and airflow: CEs were 34-38% for low (51-68 l/s) and 54-72% for high (109-138 l/s) settings. CEs for 0.3-2.0 μm particles during front burner stir-frying were 3-11% on low and 16-70% on high settings. Results indicate that CEs measured for burner CO2 are not predictive of CEs of cooking-generated particles under all conditions, but they may be suitable to identify devices with CEs above 80% both for burner combustion products and for cooking-related particles. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Army Airspace Command and Control (A2C2): Action Plan for Issue Resolution

DTIC Science & Technology

1993-09-01

INFO Information INTEL Intelligence IPR In-Process Review IVIS Inter-Vehicular Information System JACC Joint Airspace Control Center JAOC Joint Air...base, centralized such as intelligence at Fort Huachuca and combat service support at Fort Lee , or a combination of both. It is no longer efficient to...Regiment (ATS) Ft. Bragg, NC 28307 ATTN: AFZF-ATS-C (LTC Ledbetter ) (919) 396-8899/7649 Bldg 87009, 16th Street Ft. Hood, TX 76544 Commander, 1st

Cost and Performance Report: Innovative Welding Technologies Using Silicon Additives to Control Hazardous Air Pollutant (HAP) Emissions

DTIC Science & Technology

2013-08-30

turntable inside the hood to maintain a constant weld speed, while the ER308L stainless steel wire were fed by the welding gun. Figure 2. Fume chamber...size distribution, density and specific surface area of welding fumes from SMAW and GMAW mild- steel and stainless - steel consumables, American...shipyards. It uses mild or stainless steel filler material to join pieces of metal. The intense energy expended in the welding process results in the

Organ-on-a-Chip for Aerospace Physiology and Toxicology

DTIC Science & Technology

2014-12-15

Products (Chicago, IL) supplied the Laboratory Corona Treater. Silicon wafers, 3” with > orientation were obtained from Wafer World Incorporated...was flowed at a process pressure of 500 mT. The plasma was ignited at discharge power of 250 W at 30 kHz and allowed to run for 1 minute. The wafer...slide and PDMS channel surfaces was performed one of two ways. Either using a handheld corona tool operated in a chemical safety hood or the PDMS slabs

The Environmental Assessment and Management (TEAM) Guide: West Virginia Supplement

DTIC Science & Technology

2010-01-01

WVCSR 45-21-19) [Citation Revised January 2008]. • Paper Coating Line - a web coating line where coating is applied to paper . Printing presses are...from a ny stack, pi pe, a ir pol lution c ontrol de vice, or f rom a ny ot her equipment or facilities associated with a c hemical processing unit...to, hoods, ducts, fans, booths, ovens, dryers , e tc.) that contains, collects, and transports an air pollutant to a control device (WVCSR 45-21-2.9

Surface magnetic field mapping on high albedo marking areas of the moon

NASA Astrophysics Data System (ADS)

Shibuya, H.; Aikawa, K.; Tsunakawa, H.; Takahashi, F.; Shimizu, H.; Matsushima, M.

2009-12-01

The correlation between high albedo markings (HAM) on the surface of the moon and strong magnetic anomalies has been claimed since the early time of the lunar magnetic field study (Hood and Schubert, 1980). Hood et al. (1989) mapped the smoothed magnetic field over the Reiner Gamma region using Lunar Prospector magnetometer (LP-MAG) data, and showed that the position of them matches well. We have developed a method to recover the 3-d magnetic field from satellite field observations (EPR method which stands for Equivalent Pole Reduction; Toyoshima et al. 2008). Applying EPR to the several areas of strong magnetic anomalies, we calculated the magnetic anomaly maps of near surface regions, to see how the anomaly and the HAM correlate each other. The data used is of the Lunar Prospector magnetometer (LP-MAG). They are selected from low altitude observations performed in 1998 to 1999. The areas studied are Reiner Gamma, Airy, Descartes, Abel, and Crisium Antipode regions. The EPR determines a set of magnetic monopoles at the moon surface which produce the magnetic field of the observation. In each studied area, we put poles in 0.1° intervals of both latitude and longitude, then the magnetic field at 5km in altitude is calculated. The field distribution is superimposed with the albedo map made from Clementine data. The total force (Bf) maps indicate that the HMA occurs at the strong anomaly regions, but their shape does not quite overlie. However, taking horizontal component (Bh), not only position but the shape and size of the anomalies coincide with HMA regions. It is particularly true for the Reiner Gamma, and Descartes regions. The shape of HMA fits in a Bh contour. The HMA is argued to be formed by the reduction of solar wind particles which are shielded by the magnetic field. Since the deflection of the charged particle becomes large at large horizontal component, the Bh distribution showed here support the argument.

Drift Diving by Hooded Seals (Cystophora cristata) in the Northwest Atlantic Ocean

PubMed Central

Andersen, Julie M.; Stenson, Garry B.; Skern-Maurizen, Mette; Wiersma, Yolanda F.; Rosing-Asvid, Aqqalu; Hammill, Mike O.; Boehme, Lars

2014-01-01

Many pinniped species perform a specific dive type, referred to as a ‘drift dive’, where they drift passively through the water column. This dive type has been suggested to function as a resting/sleeping or food processing dive, and can be used as an indication of feeding success by calculating the daily change in vertical drift rates over time, which reflects the relative fluctuations in buoyancy of the animal as the proportion of lipids in the body change. Northwest Atlantic hooded seals perform drift dives at regular intervals throughout their annual migration across the Northwest Atlantic Ocean. We found that the daily change in drift rate varied with geographic location and the time of year and that this differed between sexes. Positive changes in buoyancy (reflecting increased lipid stores) were evident throughout their migration range and although overlapping somewhat, they were not statistically associated with high use areas as indicated by First Passage Time (FPT). Differences in the seasonal fluctuations of buoyancy between males and females suggest that they experience a difference in patterns of energy gain and loss during winter and spring, associated with breeding. The fluctuations in buoyancy around the moulting period were similar between sexes. PMID:25051251

The Repeated Name Penalty, the Overt Pronoun Penalty, and Topic in Japanese.

PubMed

Shoji, Shinichi; Dubinsky, Stanley; Almor, Amit

2017-02-01

When reading sentences with an anaphoric reference to a subject antecedent, repeated-name anaphors result in slower reading times relative to pronouns (the Repeated Name Penalty: RNP), and overt pronouns are read slower than null pronouns (the Overt Pronoun Penalty: OPP). Because in most languages previously tested, the grammatical subject is typically also the discourse topic it remains unclear whether these effects reflect anaphors' subject-hood or their topic-hood. To address this question we conducted a self-paced reading experiment in Japanese, a language which morphologically marks both subjects and topics overtly. Our results show that both repeated-name topic-subject anaphors and repeated-name non-topic-subject anaphors exhibit the RNP and that both overt-pronoun topic-subject and overt-pronoun non-topic-subject anaphors show the OPP. However, a detailed examination of performance revealed an interaction between the anaphor topic marking, reference form, and the antecedent's grammatical status, indicating that the effect of the antecedent's grammatical status is strongest for null pronoun and repeated name subject anaphors and that the overt form most similar to null pronouns is the repeated name topic anaphor. We discuss the implications of these findings for theories of anaphor processing.

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

Environmental Consequences of Nanotechnologies: Nanoparticle Dispersion in Aqueous Media: SOP-T-1

DTIC Science & Technology

2015-02-01

containing ice • Bath sonicator • Weighing dish (aluminum) • Stainless steel spatula • Analytical balance • Lab jack for lifting sample • Volumetric...balance and an aluminum dish, weigh an adequate mass of dry powder under a fume hood to achieve the desired concentration into ultrapure water (<T>, <R...0.025 0.5 0.05 1 0.5 10 1 20 2. Add ultra-pure water in a glass beaker with NP powder to /flask under fume hood (<T>, <R>). 3. Degas the bath

Archaeological Geology of the Fort Hood Military Reservation, Fort Hood, Texas

DTIC Science & Technology

1992-06-01

stream with a sinuosity of 1.3 and channel gradient of 1.4 m/km. Discharge records near Killeen over a six year period during the 1920’s and 1940’s...drains approximately 175 km2 of lower Cretaceous limestones, shales and marls (Fig. 2). Sinuosity is 1.3, channel gradient 3.2 m/km, and drainage...CREEK Within the study area Owl Creek drains approximately 72 km 2 of shales and limestones, has a sinuosity of 1.1, channel gradient of 3.4 m/kin, and

An Overview of the Ecological Effects of Tracked Vehicles on Major U.S. (United States) Army Installations

DTIC Science & Technology

1983-02-01

IL 41868 runtsil ie 35807 Fort Devens 01433 3345 CES/IE, stop 27 .oner 4ississipPi 4ulley 39180 Fort Drm 13601 -’dole East )9018 Fort Hood 7654.4...training. Detailed quantitative data were obtained from Forts Polk, Knox, Hood, and Lewis; supplementary semi-quantitative and qualitative studies were...done at Forts Benning, Bliss, Carson, Drum, Irwin, Riley, and Stewart, and at Yakima Firing Range. v- (continued on next page) D1JAN7373 3 ETOOFNO6

Statistical Evaluation of Airport Pavement Condition Survey Data for Washington, Oregon, and Idaho

DTIC Science & Technology

1988-01-01

21...COUNTY SQUIRE AIRPARK, OREGON 12 70 22...FLORENCE MUNICIPAL AP, OREGON 3 95 23...HERMISTON MUNICIPAL AP, OREGON 11 87 24...HOOD RIVER AP, OREGON...12 87 33...OROFINO MUNICIPAL AP, IDAHO 17 81 34...PRIEST RIVER MUNICIPAL AP, IDAHO 11 86 *NUgU**MmUU~tNUINNNNNNNffWUU0W NUU EU*UI** **-28 -28- TABLE 3...3 88 8...BAKER MUNICIPAL AP, OREGON 3 90 9...BEND MUNICIPAL AP, OREGON 9 89 10..CRESWELL MUNICIPAL AP, OREGON 1 98 11..HOOD RIVER AP, OREGON 1 96 12

Nitrous oxide as a tracer gas in the ASHRAE 110-1995 Standard.

PubMed

Burke, Martin; Wong, Larry; Gonzales, Ben A; Knutson, Gerhard

2014-01-01

ANSI/ASHRAE Standard 110 provides a quantitative method for testing the performance of laboratory fume hoods. Through release of a known quantity (4.0 Lpm) of a tracer gas, and subsequent monitoring of the tracer gas concentration in the "breathing zone" of a mannequin positioned in front of the hood, this method allows for evaluation of laboratory hood performance. Standard 110 specifies sulfur hexafluoride (SF6) as the tracer gas; however, suitable alternatives are allowed. Through three series of performance tests, this analysis serves to investigate the use of nitrous oxide (N2O) as an alternate tracer gas for hood performance testing. Single gas tests were performed according to ASHRAE Standard 110-1995 with each tracer gas individually. These tests showed identical results using an acceptance criterion of AU 0.1 with the sash half open, nominal 18 inches (0.46m) high, and the face velocity at a nominal 60 fpm (0.3 m/s). Most data collected in these single gas tests, for both tracer gases, were below the minimum detection limit, thus two dual gas tests were developed for simultaneous sampling of both tracer gases. Dual gas dual ejector tests were performed with both tracer gases released simultaneously through two ejectors, and the concentration measured with two detectors using a common sampling probe. Dual gas single ejector tests were performed with both tracer gases released though a single ejector, and the concentration measured in the same manner as the dual gas dual ejector tests. The dual gas dual ejector tests showed excellent correlation, with R typically greater than 0.9. Variance was observed in the resulting regression line for each hood, likely due to non-symmetry between the two challenges caused by variables beyond the control of the investigators. Dual gas single ejector tests resulted in exceptional correlation, with R>0.99 typically for the consolidated data, with a slope of 1.0. These data indicate equivalent results for ASHRAE 110 performance testing using either SF6 or N2O, indicating N2O as an applicable alternate tracer gas.

Efficient management of cardiovascular risk screening programs

NASA Technical Reports Server (NTRS)

Roth, Carol

1993-01-01

The Environmental Health Unit, located on-site at the the Goddard Space Flight Center (GSFC), is responsible for the implementation of the Center's Employee Environmental and Occupational Health Program. The Health Unit, Health Physics (HP), and Industrial Hygiene (IH) staffs collaborate to provide quality service to the employees at GSFC. The Health Unit staff identifies, evaluates, and ensures the control of occupational hazards on the Center. In the past, components of the Industrial Hygiene Program have included the Industrial Hygiene Health Hazard Identification Program (IHHIP), the Hearing Conservation Program (HCP), the Hazard Communication Program, and the bi-annual fume hood survey. More recently, the Environmental Health Unit has expanded its services by adding the Ergonomics Program. Various aspects of the Ergonomics Program are discussed.

Harvest-related edge effects on prey availability and foraging of hooded warblers in a bottomland hardwood forest.

DOE Office of Scientific and Technical Information (OSTI.GOV)

John Kilgo

2005-04-20

The effects of harvest-created canopy gaps in bottomland hardwood forests on arthropod abundance and, hence, the foraging ecology of birds are poorly understood. I predicted that arthropod abundance would be high near edges of group-selection harvest gaps and lower in the surrounding forest, and that male Hooded Warblers (Wilsonia citrina) foraging near gaps would find more prey per unit time than those foraging in the surrounding forest. In fact, arthropod abundance was greater >100 m from a gap edge than at 0-30 m or 30-100 m from an edge, due to their abundance on switchcane (Arundinaria gigantea); arthropods did notmore » differ in abundance among distances from gaps on oaks (Quercus spp.) or red maple (Acer rubrum). Similarly, Hooded Warbler foraging attack rates were not higher near gap edges: when foraging for fledglings, attack rate did not differ among distances from gaps, but when foraging for themselves, attack rates actually were lower 0-30 m from gap edges than 30-100 m or >100 m from a gap edge. Foraging attack rate was positively associated with arthropod abundance. Hooded Warblers apparently encountered fewer prey and presumably foraged less efficiently where arthropods were least abundant, i.e., near gaps. That attack rates among birds foraging for fledglings were not affected by distance from gap (and hence arthropod abundance) suggests that prey availability may not be limiting at any location across the forest, despite the depressing effects of gaps on arthropod abundance.« less

Carbon Dioxide Exposure Resulting From Hood Protective Equipment Used in Joint Arthroplasty Surgery.

PubMed

Patel, Suhani; Fine, Janelle M; Lim, Michael J; Copp, Steven N; Rosen, Adam S; West, John B; Prisk, G Kim

2017-08-01

To protect both the surgeon and patient during procedures, hooded protection shields are used during joint arthroplasty procedures. Headache, malaise, and dizziness, consistent with increased carbon dioxide (CO 2 ) exposure, have been anecdotally reported by surgeons using hoods. We hypothesized that increased CO 2 concentrations were causing reported symptoms. Six healthy subjects (4 men) donned hooded protection, fan at the highest setting. Arm cycle ergometry at workloads of 12 and 25 watts (W) simulated workloads encountered during arthroplasty. Inspired O 2 and CO 2 concentrations at the nares were continuously measured at rest, 12 W, and 25 W. At each activity level, the fan was deactivated and the times for CO 2 to reach 0.5% and 1.0% were measured. At rest, inspired CO 2 was 0.14% ± 0.04%. Exercise had significant effect on CO 2 compared with rest (0.26% ± 0.08% at 12 W, P = .04; 0.31% ± 0.05% at 25 W, P = .003). Inspired CO 2 concentration increased rapidly with fan deactivation, with the time for CO 2 to increase to 0.5% and 1.0% after fan deactivation being rapid but variable (0.5%, 12 ± 9 seconds; 1%, 26 ± 15 seconds). Time for CO 2 to return below 0.5% after fan reactivation was 20 ± 37 seconds. During simulated joint arthroplasty, CO 2 remained within Occupational Safety and Health Administration (OSHA) standards with the fan at the highest setting. With fan deactivation, CO 2 concentration rapidly exceeds OSHA standards. Copyright © 2017 Elsevier Inc. All rights reserved.

Does the Friel Anaerobic Threshold Test Accurately Detect Heart Rate Deflection in Trained Cyclists?

PubMed

Yuen, Willie K; Schreiner, Shad R; Hoover, Donald L; Loudon, Janice K; Billinger, Sandra A

The Friel Anaerobic Threshold Test (FATT) has been used to determine anaerobic threshold (AT). The FATT suggests AT occurs near the heart rate deflection point (HRDP) at a rating of perceived exertion (RPE) of 17. The primary purpose of this study was to determine 1) whether the HRDP could be determined using the FATT, 2) examine differences between HRVT and HR that coincided Borg's rating of perceived exertion (RPE) of 17, and 3) if riding position (hoods or aero) would influence performance. Fourteen male cyclists (30.4 ± 7.41years of age; 151.8 ± 60.4 cycled miles/week) participated in the study. Each subject performed the FATT on two occasions within one week. The findings of this study suggest that the FATT can determine HRDP in trained cyclists while riding in the hoods position but not the aero position. No significant difference was found between the hoods and aero position for HRVT as measured by the metabolic cart. Our data suggest that HR at an RPE of 15 more accurately reflects the HRVT than the RPE of 17. A low, non-significant correlation was found for both the hoods and aero (0.41 and 0.44, respectively; p > 0.20) for the HR at RPE of 17. The findings of this study suggest that the FATT can determine HRDP in trained cyclists. However, HRDP was identified in the cyclists preferred riding position. When performing the FATT, HRVT at an RPE of 15 should be used to estimate VT over the suggested RPE of 17.

Assisted suicide by oxygen deprivation with helium at a Swiss right-to-die organisation.

PubMed

Ogden, Russel D; Hamilton, William K; Whitcher, Charles

2010-03-01

In Switzerland, right-to-die organisations assist their members with suicide by lethal drugs, usually barbiturates. One organisation, Dignitas, has experimented with oxygen deprivation as an alternative to sodium pentobarbital. To analyse the process of assisted suicide by oxygen deprivation with helium and a common face mask and reservoir bag. This study examined four cases of assisted suicide by oxygen deprivation using helium delivered via a face mask. Videos of the deaths were provided by the Zurich police. Dignitas provided protocol and consent information. One man and three women were assisted to death by oxygen deprivation. There was wide variation in the time to unconsciousness and the time to death, probably due to the poor mask fit. Swiss law prevented attendants from effectively managing the face mask apparatus. Purposeless movements of the extremities were disconcerting for Dignitas attendants, who are accustomed to assisting suicide with barbiturates. None of the dying individuals attempted self-rescue. The dying process of oxygen deprivation with helium is potentially quick and appears painless. It also bypasses the prescribing role of physicians, effectively demedicalising assisted suicide. Oxygen deprivation with a face mask is not acceptable because leaks are difficult to control and it may not eliminate rebreathing. These factors will extend time to unconsciousness and time to death. A hood method could reduce the problem of mask fit. With a hood, a flow rate of helium sufficient to provide continuous washout of expired gases would remedy problems observed with the mask.

Small SWAP 3D imaging flash ladar for small tactical unmanned air systems

NASA Astrophysics Data System (ADS)

Bird, Alan; Anderson, Scott A.; Wojcik, Michael; Budge, Scott E.

2015-05-01

The Space Dynamics Laboratory (SDL), working with Naval Research Laboratory (NRL) and industry leaders Advanced Scientific Concepts (ASC) and Hood Technology Corporation, has developed a small SWAP (size, weight, and power) 3D imaging flash ladar (LAser Detection And Ranging) sensor system concept design for small tactical unmanned air systems (STUAS). The design utilizes an ASC 3D flash ladar camera and laser in a Hood Technology gyro-stabilized gimbal system. The design is an autonomous, intelligent, geo-aware sensor system that supplies real-time 3D terrain and target images. Flash ladar and visible camera data are processed at the sensor using a custom digitizer/frame grabber with compression. Mounted in the aft housing are power, controls, processing computers, and GPS/INS. The onboard processor controls pointing and handles image data, detection algorithms and queuing. The small SWAP 3D imaging flash ladar sensor system generates georeferenced terrain and target images with a low probability of false return and <10 cm range accuracy through foliage in real-time. The 3D imaging flash ladar is designed for a STUAS with a complete system SWAP estimate of <9 kg, <0.2 m3 and <350 W power. The system is modeled using LadarSIM, a MATLAB® and Simulink®- based ladar system simulator designed and developed by the Center for Advanced Imaging Ladar (CAIL) at Utah State University. We will present the concept design and modeled performance predictions.

Fine water spray for fire extinguishing. Phase 2: Turbine hood

NASA Astrophysics Data System (ADS)

Aune, P.; Wighus, R.; Drangsholt, G.; Stensaas, J. P.

1994-12-01

SINTEF has carried out tests of a Fine Water Spray fire suppression system intended to be used as a replacement for Halon systems in turbine hoods on offshore platforms operated by British Petroleum Norway. The tests were carried out in a 70 cu m full scale model representing a turbine hood of the Ula platform in the North Sea. A mock-up of a gas turbine was installed in the model. The scope of work in Phase 2 was to verify the efficiency of fire suppression in realistic fire scenarios using a Fine Water Spray system, and to find an optimum procedure for water application in a fire situation. Two reports have been made from the experiments in Phase 2, one Main Report, STF25 A94036, and the present Technical Report, STF25 A94037. The discussion and conclusions are given in the Main Report while this Technical Report gives a more thorough presentation of the experimental setup and methods used for calibration and calculation of measured values. In addition, a complete set of curves for each experiment is included.

Dioxins and congener-specific polychlorinated biphenyls in three avian species from the Wisconsin River, Wisconsin

USGS Publications Warehouse

Custer, T.W.; Custer, Christine M.; Hines, Randy K.

2002-01-01

Sediments from the Wisconsin River, WI, USA are contaminated with 2,3,7,8-tetrachloro-p-dioxin (TCDD) and polychlorinated biphenyls (PCBs). Wet weight concentrations of TCDD and PCBs in eggs were at background levels and highest in the piscivorous hooded merganser (Lophodytes cucullatus; geometric MEAN=7 pg/g TCDD and 0.92 I?g/g PCBs) and lowest in the omnivorous wood duck (Aix sponsa) (<1 pg/g and 0.07 I?g/g); concentrations in eggs of the insectivorous tree swallow (Tachycineta bicolor) were intermediate (<1 pg/g and 0.33 I?g/g). Positive accumulation rates of TCDD (8a??19 pg/day) and PCBs (0.4a??0.7 I?g/day) in tree swallow nestlings suggest that the Wisconsin River is the source of these contaminants for tree swallow nestlings. The lower representation of trichlorobiphenyls and tetrachorobiphenyls in hooded merganser eggs compared to wood duck or tree swallow eggs suggests that the hooded merganser or its diet has a greater ability to metabolize lower-numbered PCB congeners than wood ducks or tree swallows.

Full-Scale Schlieren Visualization of Commercial Kitchen Ventilation Aerodynamics

NASA Astrophysics Data System (ADS)

Miller, J. D.; Settles, G. S.

1996-11-01

The efficient removal of cooking effluents from commercial kitchens has been identified as the most pressing energy-related issue in the food service industry. A full-scale schlieren optical system with a 2.1x2.7m field-of-view, described at previous APS/DFD meetings, images the convective airflow associated with a typical gas-fired cooking griddle and ventilation hood. Previous attempts to visualize plumes from cooking equipment by smoke and neutrally-buoyant bubbles were not sufficiently keyed to thermal convection. Here, the point where the ventilation hood fails to capture the effluent plume is clearly visible, thus determining the boundary condition for a balanced ventilation system. Further, the strong influence of turbulent entrainment is seen in the behavior of the combustion products vented by the griddle and the interference caused by a makeup-air outlet located too close to the lip of the ventilation hood. Such applications of traditional fluid dynamics techniques and principles are believed to be important to the maturing of ventilation technology. (Research supported by EPRI and IFMA, Inc.)

Peculiarities of RFLP of highly repetitive DNA in crow genomes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chelomina, G.N.; Kryukov, A.P.; Ivanov, S.V.

1995-02-01

We present a study of the structural organization of highly repetitive DNA in genomes of hooded crow Corvus cornix L., carrion crow C. corone L., and jungle crow C. macrorhynchos Wagl. RFLP and blot-hybridization with {sup 32}P-labeled Msp I fragment from hooded crow nDNA suggest the interspecific structural conservatism of the most repetitive DNA. The family of repeats we studied had tandem organization and the same (210 bp) period of reiteration for a set of restriction enzymes. However, in parallel to the general similarity of restriction patterns, there are species-specific peculiarities. The repetitive family revealed (Alu I, BsuR I, andmore » Msp I fragments) has quantitative RFLP of nDNA and interspecific differences in the extent of the multimer {open_quotes}ladder{close_quotes} pattern of Msp I fragments. The latter is more pronounced in nDNA of carrion crow than in that of phylogenetically distant jungle crow and closely related hooded crow. This suggests a recent amplification event for highly organized homological repeats in crow genomes. 10 refs., 2 figs.« less

The danger of collapsing lava domes; lessons for Mount Hood, Oregon

USGS Publications Warehouse

Brantley, S.R.; Scott, W.E.

1993-01-01

Nestled in the crater of Oregon's majestic Mount Hood volcano is Crater Rock, a prominent feature known to thousands of skiers, climbers, and tourists who journey each year to the famous Timberline Lodge located high on the volcano's south flank. Crater Rock stands about 100m above the sloping crater floor and warm fumaroles along its base emit sulfur gases and a faint steam plume that is sometimes visible from the lodge. What most visitors do not know, however, is that Crater Rock is a volcanic lava dome only 200 years old. 

The Joseph Barker, Jr. Home: A Comparative Architectural and Historical Study of a 19th Century Brick and Frame Dwelling in Washington County, Ohio,

DTIC Science & Technology

1981-02-01

wooden structure would be safer than one of stone or brick may have been. The New Madrid earthquake of December 18 11 did hit the middle Mississippi River...Hood 1958: 1; Barker 1927: 389). Joseph Barker’s father, Deacon Ephraim, was a housewright and builder of churches in New Hampshire and also worked as a...of Ohio, the Barker family migrated to the Ohio Valley from New England, specifically from Amherst, New Hampshire, in 1789 (Hood 1958: iii). Barker was

Conductive heat transfer from an isothermal magma chamber and its application to the measured heat flow distribution from mount hood, Oregon

USGS Publications Warehouse

Nathenson, Menuel; Tilling, Robert I.; ,

1993-01-01

A steady-state solution for heat transfer from an isothermal, spherical magma chamber, with an imposed regional geothermal gradient far from the chamber, is developed. The extensive published heat-flow data set for Mount Hood, Oregon, is dominated by conductive heat transfer in the deeper parts of most drill holes and provides an ideal application of such a model. Magma-chamber volumes or depths needed to match the distribution of heat-flow data are larger or shallower than those inferred from geologic evidence.

Archaeological Survey at Fort Hood, Texas Fiscal Year 1987: The MCA range Construction, Pidcoke Land Exchange, and Phantom Range Projects. Archeological Resource Management Series Research Report Number 23

DTIC Science & Technology

1991-01-01

ORGANIZATION NAME AND ADORES$ 10. PROGRAM ELEMENT. PROJECT. TASK AREA G WORK UNIT NUMBERS Archeological Research Laboratory Texas A&M University College Station...V’Avail and/or • G O8IRZ This report summarizes the results of an archeological survey conducted for the U.S. Army at Fort Hood, Texas, by personnel from...it forms numerous round-topped buttes and outliers where the Edwards cap is eroded away. Overly-,, g the Comanche Peak formation is the Edwards

Presenting the master of all conductivity meters, and how it tastes streamflow

NASA Astrophysics Data System (ADS)

Weijs, S. V.; Parlange, M. B.

2012-04-01

For measuring streamflow in small Alpine streams, the salt dilution method is suitable and often used. By injecting a known mass of salt in the stream and measuring the downstream salt concentration as a function of time, we can obtain the streamflow by integration of the time signal. The underlying assumption is that the salt is well mixed within the stream cross-section. In this method, the salt concentration us usually measured through its relation with conductivity. Several commercial systems exist to do these conductivity measurements and automatically process the results. The problem we encountered when using these systems, however, is that uncertainty is often hidden under the hood. Because the processing happens onboard, researchers may be tempted to put too much trust in the final measurement outcomes. This is somewhat remediated by using a system with two probes which are individually processed to a streamflow outcome. We found that the salt-wave was differently shaped for the faster part of the stream compared to the sides, and therefore gave different readings for the discharge. To come a more probabilistic characterization of streamflow, and to know what is under the hood, we decided to build our own conductivity meter, equipped with eight probes covering the cross section. This enables quantifying some of the uncertainty in the streamflow measurements, which is important for testing hydrological models. This poster shows the first results and the hardware setup. We based our hardware on the open source hardware platform Arduino, and believe that by sharing both the design and the drawbacks, we contribute to the evolution of better measurement equipment or at least better understanding of its shortcomings.

Thermal Desorption/Ultraviolet Photolysis Process Technology Research, Test, and Evaluation Performed at the Naval Construction Battalion Center, Gulfport, Mississippi, for the USAF Installation Restoration Program. Volume 2

DTIC Science & Technology

1987-12-01

protection needs to be changed, then protection will be upgraded, or downgraded, as appropriate. 5 . Cartridges for air-purifying respirators will be...the gloves, the legs taped to the boots, and the hood to the respirator (if appropriate). All openings shall be sealed. 5 . The protective coveralls...placed next to the trash container. Note: Suits are to be removed in an inside out fashion. m. Station 5 - Respirator Removal A rack will be available to

Hood River Fish Habitat Project; Confederated Tribes of the Warm Springs Reservation of Oregon, Annual Report 2002-2003.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaivoda, Alexis

2004-02-01

This report summarizes the project implementation and monitoring of all habitat activities in the Hood River basin that occurred over the October 1, 2002 to September 30, 2003 period (FY 03). Some of the objectives in the corresponding statement of work for this contract were not completed within FY 03. A description of the progress during FY 03 and reasoning for deviation from the original tasks and timeline are provided. OBJECTIVE 1 - Provide coordination of all activities, administrative oversight and assist in project implementation and monitoring activities. Administrative oversight and coordination of the habitat statement of work, budget, subcontracts,more » personnel, implementation, and monitoring was provided. OBJECTIVE 2 - Continue to coordinate, implement, and revise, as needed, the Hood River Fish Habitat Protection, Restoration, and Monitoring Plan. The Hood River Fish Habitat Protection, Restoration, and Monitoring Plan was completed in 2000 (Coccoli et al., 2000). This document was utilized for many purposes including: drafting the Watershed Action Plan (Coccoli, 2002), ranking projects for funding, and prioritizing projects to target in the future. This document has been reviewed by many, including stakeholders, agencies, and interested parties. The Hood River Watershed Group Coordinator and author of the Hood River Fish Habitat Protection, Restoration, and Monitoring Plan, Holly Coccoli, has updated and revised the plan. Changes will be reflected in the Hood River Subbasin Plan, and after submission of the Subbasin Plan, a formally revised version of the Monitoring Plan will be put out for review. This will more specifically address changes in the Hood River subbasin since 2000, and reflect changes to fish habitat and needs in the Hood River subbasin regarding monitoring. OBJECTIVE 3 - Evaluate and monitor the habitat, accessibility, and presence of winter steelhead, coho salmon, and resident trout upstream of the Middle Fork Irrigation District water sources on Evans Creek. Through this project, BPA funded the Middle Fork Irrigation District (MFID) a total of $194,000 in FY 03 for the Glacier Ditch- Evans Creek project. BPA funds accounted for approximately 30% of the project while the remaining 70% was cost-shared by the MFID, the US Forest Service, and the Oregon Watershed Enhancement Board. The MFID operated irrigation diversions on Evans Creek (Hutson pond RM 4.0 and the Evans Creek diversion RM 5.5), a tributary to the East Fork Hood River. Both diversions had inadequate upstream fish passage, and utilized Evans Creek to transport Eliot Branch water to distribute irrigation water lower in the basin. This project consisted of: piping a portion of the Glacier ditch to create a pressurized irrigation pipeline system, piping the Hutson extension, removing the culvert on Evans Creek near the Glacier ditch, removing the culvert above the Hutson pond, revegetating the disturbed areas, and providing adequate and approved fish passage on Evans Creek. Prior to any work, Brian Connors with MFID completed a NEPA checklist. Some of the key regulatory points of this project included wetland delineations, a cultural resources survey, and consultations with NOAA Fisheries, U.S. Fish and Wildlife, Oregon Department of Fish and Wildlife (ODFW), and the U.S. Army Corps of Engineers. This project will eliminate the overflow of silty water into Evans Creek and West Fork Evans Creek. Upon completion of this project, access to 2.5 miles of winter steelhead, coho salmon, and resident trout habitat will be restored. Elimination of the interbasin transfer of water will discontinue the conveyance of silty Eliot Branch water into clear East Fork tributaries. Additionally, less water taken from Coe Branch, Eliot Branch, and Laurance Lake which will benefit listed steelhead and bull trout. The Glacier Ditch provided irrigation water from the Eliot Branch to upper valley orchards and agriculture for more than 100 years. The Glacier Ditch served approximately 1,438 acres with 18 cfs of water. The Glacier Ditch portion of this project consisted of 12,000 feet of 24-inch HDPE pipe, and was installed in February and March of 2003. Most of this pipeline was installed in or along the Glacier Ditch. The pipe crossed Evans Creek near the concrete diversion. A wooddecked steel bridge will be built during the summer of 2004, to replace the culvert crossing. The bridge will enable Evans Creek to be restored to a natural flow pattern. The pond will be left to equalize with the hydrology of the area. The Hutson Extension phase of this project consisted of 4,330 feet of 48-inch HDPE pipe. This part of the project eliminated the need for the existing diversion and fish ladder at Hutson Pond. This pipe was installed during April 2003 and lies beneath the Evans Creek and West Fork Evans Creek stream channels (Figure 1). One culvert was removed at the Hutson Pond on Evans Creek (RM 3.3).« less

Mathematical modeling of thermal stresses in basic oxygen furnace hood tubes

NASA Astrophysics Data System (ADS)

Samarasekera, I. V.

1985-06-01

The stress-strain history of Basic Oxygen Furnace hood tubes during thermal cycling has been computed using heat flow and stress analyses. The steady-state temperature distribution in a transverse section of the tube was computed at a location where gas temperature in the hood could be expected to be a maximum. Calculations were performed for peak gas temperatures in the range 1950 to 2480 °C (3500 to 4500 °F). The stress-strain history of an element of material located at the center of the tube hot face was traced for three consecutive cycles using elasto-plastic finite-element analysis. It has been shown that the state of stress in the element alternates between compression and tension as the tube successively heats and cools. Yielding and plastic flow occurs at the end of each half of a given cycle. It was postulated that owing to repctitive yielding, plastic strain energy accumulates causing failure of the tubes by fatigue in the low cycle region. Using fatigue theory a conservative estimate for tube life was arrived at. In-plant observations support this mechanism of failure, and the number of cycles within which tube cracking was observed compares reasonably with model predictions. Utilizing the heat flow and stress models it was recommended that tube life could be enhanced by changing the tube material to ARMCO 17-4 pH or AISI 405 steel or alternatively reconstructing hoods with AISI 316L tubes of reduced thickness. These recommendations were based on the criterion that low-cycle fatigue failure could be averted if the magnitude of the cyclic strain could be reduced or if macroscopic plastic flow could be prevented.

Pollutant exposures from natural gas cooking burners: a simulation-based assessment for Southern California.

PubMed

Logue, Jennifer M; Klepeis, Neil E; Lobscheid, Agnes B; Singer, Brett C

2014-01-01

Residential natural gas cooking burners (NGCBs) can emit substantial quantities of pollutants, and they are typically used without venting range hoods. We quantified pollutant concentrations and occupant exposures resulting from NGCB use in California homes. A mass-balance model was applied to estimate time-dependent pollutant concentrations throughout homes in Southern California and the exposure concentrations experienced by individual occupants. We estimated nitrogen dioxide (NO2), carbon monoxide (CO), and formaldehyde (HCHO) concentrations for 1 week each in summer and winter for a representative sample of Southern California homes. The model simulated pollutant emissions from NGCBs as well as NO2 and CO entry from outdoors, dilution throughout the home, and removal by ventilation and deposition. Residence characteristics and outdoor concentrations of NO2 and CO were obtained from available databases. We inferred ventilation rates, occupancy patterns, and burner use from household characteristics. We also explored proximity to the burner(s) and the benefits of using venting range hoods. Replicate model executions using independently generated sets of stochastic variable values yielded estimated pollutant concentration distributions with geometric means varying by <10%. The simulation model estimated that-in homes using NGCBs without coincident use of venting range hoods-62%, 9%, and 53% of occupants are routinely exposed to NO2, CO, and HCHO levels that exceed acute health-based standards and guidelines. NGCB use increased the sample median of the highest simulated 1-hr indoor concentrations by 100, 3,000, and 20 ppb for NO2, CO, and HCHO, respectively. Reducing pollutant exposures from NGCBs should be a public health priority. Simulation results suggest that regular use of even moderately effective venting range hoods would dramatically reduce the percentage of homes in which concentrations exceed health-based standards.

A Comparative Morphometric Analysis of Three Cranial Nerves in Two Phocids: The Hooded Seal (Cystophora cristata) and the Harbor Seal (Phoca vitulina).

PubMed

Wohlert, Dennis; Kröger, Jürgen; Witt, Martin; Schmitt, Oliver; Wree, Andreas; Czech-Damal, Nicole; Siebert, Ursula; Folkow, Lars; Hanke, Frederike D

2016-03-01

While our knowledge about the senses of pinnipeds has increased over the last decades almost nothing is known about the organization of the neuroanatomical pathways. In a first approach to this field of research, we assessed the total number of myelinated axons of three cranial nerves (CNs) in the harbor (Phoca vitulina, Pv) and hooded seal (Cystophora cristata, Cc). Axons were counted in semithin sections of the nerves embedded in Epon and stained with toluidine blue. In both species, the highest axon number was found within the optic nerve (Pv 187,000 ± 8,000 axons, Cc 481,600 ± 1,300 axons). Generally, considering absolute axon numbers, far more axons were counted within the optic and trigmenial nerve (Pv 136,700 ± 2,500 axons, Cc 179,300 ± 6,900 axons) in hooded in comparison to harbor seals. The axon counts of the vestibulocochlear nerve are nearly identical for both species (Pv 87,100 ± 8,100 axons, Cc 86,600 ± 2,700 axons). However, when comparing cell density, the cell density is almost equal for all nerves for both species except for the optic nerve in which cell density was particularly higher than in the other nerves and higher in hooded in comparison to harbor seals. We here present the first comparative analysis of three CNs in two phocid seals. While the CNs of these closely related species share some general characteristics, pronounced differences in axon numbers/densities are apparent. These differences seem to reflect differences in e.g. size, habitat, and/or functional significance of the innervated sensory systems. © 2015 Wiley Periodicals, Inc.

Applications of low temperature CO-oxidation catalysts to breathable gases

NASA Technical Reports Server (NTRS)

Noordally, Ehsan; Richmond, John R.

1990-01-01

Modifications of tin oxide/precious metal catalysts described for use in CO2 lasers have also been developed for use in other applications; namely, as low temperature CO oxidation components in fire escape hoods/masks for mines, aircrafts, hotels, and offices and in sealed environments, such as hyperbaric chambers and submarines. Tin oxide/precious metal catalysts have been prepared on a variety of high surface area cloth substrates for application in fire escape hoods. These show high and stable CO oxidation capability (10 to the 4th power ppm CO reduced to 10 to the 1st power ppm CO) at GHSV of 37,000 h(-1) with water saturated inlet gas at body heat (37 C) and below. Water vapor plays an important role in the surface state/performance of tin oxide catalyst. Water-resistant formulations have been produced by the introduction of transition metal promoters. Tin oxide/precious metal catalysts have also been developed for CO oxidation in the North Sea diving environment. These are currently in use in a variety of hyperbaric chambers and diving vehicles. Ambient temperature operation and resistance to atmospheric water vapor have been demonstrated, and as a result, they offer a viable alternative to hopcalite or heated catalyst systems. A new range of non-tin oxide based low temperature CO oxidation catalysts is described. They are based on reducible metal oxides promoted with previous metals. Preliminary data on selected materials in the form of both cloth artifacts and shaped pellets are presented. They are expected to be applicable both to the breathable gas application area and to CO2 lasers.

Plant resistance mechanisms to air pollutants: rhythms in ascorbic acid production during growth under ozone stress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, E.H.

1991-01-01

Relationships between ozone (O3) tolerance and leaf ascorbic acid concentrations in O3-susceptible (O3-S) 'Hark' and O3-resistant (O3-R) 'Hood' soybean, Glycine max (L.) Merr., cultivars were examined with high-performance liquid chromatography (HPLC). Leaf samples were analyzed at 4 intervals during a 24 h period. Soybean cultivars grown in the greenhouse with charcoal filtered (CF) and nonfiltered (NF) air showed daily oscillations in ascorbic acid production. Highest ascorbic acid levels in leaves during light coincided with highest concentrations of photochemical oxidants in the atmosphere at 2:00 p.m. The resistant genotype produced more ascorbic acid in its trifoliate leaves than did the correspondingmore » susceptible genotype. Under CF air (an O3-reduced environment) O3-S and O3-R cultivars showed rhythms in ascorbic acid production. In NF air (an O3 stress environment) the O3-R cultivar alone showed rhythms in ascorbic acid production. Results indicated that superior O3 tolerance in the Hood soybean cultivar (compared with Hark) was associated with a greater increase in endogenous levels of ascorbic acid. Ascorbic acid may scavenge free radicals and thereby protect cells from injury by O3 or other oxyradical products. Plants defend themselves against photochemical oxidant stress, such as O3, by several mechanisms. Experimental evidence indicates that antioxidant defense systems existing in plant tissues may function to protect cellular components from deleterious effects of photochemical oxidants through endogenous and exogenous controls.« less

KSC-06pd2670

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery is bathed in light on Launch Pad 39B after rollback of the rotating service structure after midnight. Beneath Discovery's wings are the tail masts, which provide several umbilical connections to the orbiter, including a liquid-oxygen line through one and a liquid-hydrogen line through another. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/George Shelton

KSC-06pd2673

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Under a blue sky, Space Shuttle Discovery is ready for launch of mission STS-116 from Launch Pad 39B. Beneath Discovery's wings are the tail masts, which provide several umbilical connections to the orbiter, including a liquid-oxygen line through one and a liquid-hydrogen line through another. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/Ken Thornsley

KSC-98pc1160

NASA Image and Video Library

1998-09-27

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top touches down at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999

KSC-98pc1161

NASA Image and Video Library

1998-09-27

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft gently lands its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999

KSC-98pc1159

NASA Image and Video Library

1998-09-27

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft with orbiter Atlantis on top arrives at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999

Kilogram-scale prexasertib monolactate monohydrate synthesis under continuous-flow CGMP conditions.

PubMed

Cole, Kevin P; Groh, Jennifer McClary; Johnson, Martin D; Burcham, Christopher L; Campbell, Bradley M; Diseroad, William D; Heller, Michael R; Howell, John R; Kallman, Neil J; Koenig, Thomas M; May, Scott A; Miller, Richard D; Mitchell, David; Myers, David P; Myers, Steven S; Phillips, Joseph L; Polster, Christopher S; White, Timothy D; Cashman, Jim; Hurley, Declan; Moylan, Robert; Sheehan, Paul; Spencer, Richard D; Desmond, Kenneth; Desmond, Paul; Gowran, Olivia

2017-06-16

Advances in drug potency and tailored therapeutics are promoting pharmaceutical manufacturing to transition from a traditional batch paradigm to more flexible continuous processing. Here we report the development of a multistep continuous-flow CGMP (current good manufacturing practices) process that produced 24 kilograms of prexasertib monolactate monohydrate suitable for use in human clinical trials. Eight continuous unit operations were conducted to produce the target at roughly 3 kilograms per day using small continuous reactors, extractors, evaporators, crystallizers, and filters in laboratory fume hoods. Success was enabled by advances in chemistry, engineering, analytical science, process modeling, and equipment design. Substantial technical and business drivers were identified, which merited the continuous process. The continuous process afforded improved performance and safety relative to batch processes and also improved containment of a highly potent compound. Copyright © 2017, American Association for the Advancement of Science.

Transit research and industry news update : December 2009.

DOT National Transportation Integrated Search

2010-12-01

SPECIAL............................................................................................................................3 : Transportation Secretary LaHood Proposes New Rail Safety Bill.............................3 : Federal Highway & Tra...

Hooded warbler in North Dakota

USGS Publications Warehouse

Hotchkiss, N.

1943-01-01

he 1942 warbler migration at Kenmare, Ward County, North Dakota, was rich in species (seventeen) for a locality so far west on the Great Plains. On June 1, near the end of the northward flight, I found a male Hooded Warbler singing in shrubby undergrowth on a wooded coulee slope on the Des Lacs National Wildlife Refuge, about two miles south of Kenmare. The bird was observed at close range for several minutes, both without and with 7-power binoculars. It behaved as in the vicinity of Washington, D. C., where I have been familiar with the species for several years, the song being vigorous and loud and the movements leisurely.

The Robin Hood method - A novel numerical method for electrostatic problems based on a non-local charge transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lazic, Predrag; Stefancic, Hrvoje; Abraham, Hrvoje

2006-03-20

We introduce a novel numerical method, named the Robin Hood method, of solving electrostatic problems. The approach of the method is closest to the boundary element methods, although significant conceptual differences exist with respect to this class of methods. The method achieves equipotentiality of conducting surfaces by iterative non-local charge transfer. For each of the conducting surfaces, non-local charge transfers are performed between surface elements, which differ the most from the targeted equipotentiality of the surface. The method is tested against analytical solutions and its wide range of application is demonstrated. The method has appealing technical characteristics. For the problemmore » with N surface elements, the computational complexity of the method essentially scales with N {sup {alpha}}, where {alpha} < 2, the required computer memory scales with N, while the error of the potential decreases exponentially with the number of iterations for many orders of magnitude of the error, without the presence of the Critical Slowing Down. The Robin Hood method could prove useful in other classical or even quantum problems. Some future development ideas for possible applications outside electrostatics are addressed.« less

Nest-site selection analysis of hooded crane (Grus monacha) in Northeastern China based on a multivariate ensemble model.

PubMed

Jiao, Shengwu; Guo, Yumin; Huettmann, Falk; Lei, Guangchun

2014-07-01

Avian nest-site selection is an important research and management subject. The hooded crane (Grus monacha) is a vulnerable (VU) species according to the IUCN Red List. Here, we present the first long-term Chinese legacy nest data for this species (1993-2010) with publicly available metadata. Further, we provide the first study that reports findings on multivariate nest habitat preference using such long-term field data for this species. Our work was carried out in Northeastern China, where we found and measured 24 nests and 81 randomly selected control plots and their environmental parameters in a vast landscape. We used machine learning (stochastic boosted regression trees) to quantify nest selection. Our analysis further included varclust (R Hmisc) and (TreenNet) to address statistical correlations and two-way interactions. We found that from an initial list of 14 measured field variables, water area (+), water depth (+) and shrub coverage (-) were the main explanatory variables that contributed to hooded crane nest-site selection. Agricultural sites played a smaller role in the selection of these nests. Our results are important for the conservation management of cranes all over East Asia and constitute a defensible and quantitative basis for predictive models.

Wood crib fire free burning test in ISO room

NASA Astrophysics Data System (ADS)

Qiang, Xu; Griffin, Greg; Bradbury, Glenn; Dowling, Vince

2006-04-01

In the research of application potential of water mist fire suppression system for fire fighting in train luggage carriage, a series of experiments were conducted in ISO room on wood crib fire with and without water mist actuation. The results of free burn test without water mist suppression are used as reference in evaluating the efficiency of water mist suppression system. As part of the free burn test, several tests have been done under the hood of ISO room to calibrate the size of the crib fire and these tests can also be used in analyzing the wall effect in room fire hazard. In these free burning experiments, wood cribs of four sizes under the hood were tested. The temperature of crib fire, heat flux around the fire, gas concentration in hood of ISO room were measured in the experiments and two sets of thermal imaging system were used to get the temperature distribution and the typical shape of the free burning flames. From the experiments, the radiation intensity in specific positions around the fire, the effective heat of combustion, mass loss, oxygen consumption rate for different sizes of fire, typical structure of the flame and self extinguishment time was obtained for each crib size.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, Brett C.; Pass, Rebecca Zarin; Delp, William W.

Combustion pollutant concentrations were measured during the scripted operation of natural gas cooking burners in nine homes. Boiling and simmering activities were conducted on the stovetop and in the oven with and without range hood exhaust ventilation or air mixing via a forced air system. Time-resolved concentrations of carbon dioxide (CO 2), nitric oxide (NO), nitrogen oxides (NO x), nitrogen dioxide (NO 2), particles with diameters of 6 nm or larger (PN), carbon monoxide (CO), and fine particulate matter (PM 2.5) were measured in the kitchen and bedroom area of each home. Four of the nine homes had kitchen 1more » h NO 2 exceed the national ambient air quality standard (100 ppb). In all homes, the highest 1 h integrated PN exceeded 2 × 10 5 cm -3-h, and the highest 4 h PN exceeded 3 × 10 5 cm -3-hr in the kitchen. Range hood performance varied widely, but one with a large capture volume and a measured flow of 108 L/s reduced concentrations 80–95%. Increased awareness of the need to ventilate when cooking, along with building standards for minimum range hood flow rates and volume, could substantially reduce exposures to NO 2 and ultrafine particles in homes.« less

The Effect of Aging on the Ventilatory Response to Wearing a Chemical, Biological, Radiological, and Nuclear Hood Respirator at Rest and During Mild Exercise.

PubMed

Ofir, Dror; Yanir, Yoav; Eynan, Mirit; Aviner, Ben; Biram, Adi; Mullokandov, Michael; Bar, Ronen; Arieli, Yehuda

2017-01-01

Structural changes in the human body resulting from aging may affect the response to altered levels of O 2 and CO 2 . An abnormal ventilatory response to a buildup of CO 2 in the inspired air due to rebreathing may result in adverse effects, which will impair the individual's ability to function under stress. The purpose of this study was to evaluate the effect of age on the respiratory response to wearing an escape hood at rest and during mild exercise. Subjects were seven healthy, young adult males (20-30 years) and seven healthy, middle-aged males (45-65 years). Inspired CO 2 and O 2 , breathing pattern (tidal volume [V T ] and breathing frequency [F]), and mouth inspiratory and expiratory pressures, were measured at rest and during mild exercise (50 w) while wearing the CAPS 2000 escape hood (Shalon Chemical Industries and Supergum-Rubber and Plastic Technology, Tel Aviv, Israel). Resting inspired CO 2 was higher in the middle-aged group compared with the young group (2.25% ± 0.42% and 1.80% ± 0.34%, respectively; p < 0.05). Breathing pattern in the middle-aged group tended to be shallower and faster compared with the young group (V T : 0.69 ± 0.27 L and 0.79 ± 0.32 L, respectively; F: 14.7 ± 4.0 breaths/min and 12.4 ± 2.8 breaths/min, respectively). During exercise, there was a trend toward a high inspired CO 2 in the middle-aged group compared with the young group (2.18% ± 0.40% CO 2 and 1.94% ± 0.70% CO 2 , respectively). A correlation was found between age and inspired CO 2 when wearing the escape hood (r 2 = 0.375; p < 0.05). The age-related decrease in pulmonary function, together with the finding in this study of a higher inspired CO 2 in middle-aged subjects wearing the CAPS 2000, may represent a greater risk for persons of middle age wearing an escape hood. On the basis of this study, it would appear reasonable to recommend that new respirators be evaluated on subjects from different age groups, to ensure the safety of both young and old. Reprint & Copyright © 2017 Association of Military Surgeons of the U.S.

Monitoring the aeration efficiency and carbon footprint of a medium-sized WWTP: experimental results on oxidation tank and aerobic digester.

PubMed

Caivano, Marianna; Bellandi, Giacomo; Mancini, Ignazio M; Masi, Salvatore; Brienza, Rosanna; Panariello, Simona; Gori, Riccardo; Caniani, Donatella

2017-03-01

The efficiency of aeration systems should be monitored to guarantee suitable biological processes. Among the available tools for evaluating the aeration efficiency, the off-gas method is one of the most useful. Increasing interest towards reducing greenhouse gas (GHG) emissions from biological processes has resulted in researchers using this method to quantify N 2 O and CO 2 concentrations in the off-gas. Experimental measurements of direct GHG emissions from aerobic digesters (AeDs) are not available in literature yet. In this study, the floating hood technique was used for the first time to monitor AeDs. The floating hood technique was used to evaluate oxygen transfer rates in an activated sludge (AS) tank of a medium-sized municipal wastewater treatment plant located in Italy. Very low values of oxygen transfer efficiency were found, confirming that small-to-medium-sized plants are often scarcely monitored and wrongly managed. Average CO 2 and N 2 O emissions from the AS tank were 0.14 kg CO2 /kg bCOD and 0.007 kg CO2,eq /kg bCOD , respectively. For an AeD, 3 × 10 -10  kg CO2 /kg bCOD direct CO 2 emissions were measured, while CO 2,eq emissions from N 2 O were 4 × 10 -9  kg CO2,eq /kg bCOD . The results for the AS tank and the AeD were used to estimate the net carbon and energy footprint of the entire plant.

Fractionation and Accretion of Meteorite Parent Bodies

NASA Technical Reports Server (NTRS)

Weidenschilling, Stuart J.

2005-01-01

Senior Scientist Stuart J. Weidenschilling presents his final administrative report for the research program on which he was the Principal Investigator. The research program resulted in the following publications: 1) Particle-gas dynamics and primary accretion. J. N. Cuzzi and S. J . Weidenschilling. To appear in Meteorites and the Early Solar System 11 (D. Lauretta et a]., Eds.), Univ. Arizona Press. 2005; 2) Timescales of the solar protoplanetary disk. S. Russell, L. Hartmann, J . N. Cuzzi, A. Krot, M. Gounelle and S. J. Weidenschilling. To appear in Meteorites and the Early Solar System II (D. Lauretta et al., Eds.), Univ. Arizona Press, 2005; 3) Nebula evolution of thermally processed solids: Reconciling astrophysical models and chondritic meteorites. J. N. Cuzzi, F. J. Ciesla, M. I. Petaev, A. N. Krot, E. R. D. Scott and S . J. Weidenschilling. To appear in Chondrites and the Protoplanetary Disk (A. Krot et a]., Eds.), ASP Conference Series, 2005; 4) Possible chondrule formation in planetesimal bow shocks: Physical processes in the near vicinity of the planetesimal. L. L. Hood, F. J. Ciesla and S. J. Weidenschilling. To appear in Chondrites and the Protoplanetary Disk (A. Krot et al., Eds.), ASP Conference Series, 2005; 5) From icy grains to comets. In Comets II (M. Festou et al., Eds.), Univ. Arizona Press, pp. 97- 104, 2005; 6) Evaluating planetesimal bow shocks as sites for chondrule formation. F. J . Ciesla, L. L. Hood and S. J. Weidenschilling. Meteoritics & Planetary Science 39, 1809-1 821, 2004; and 7) Radial drift of particles in the solar nebula: Implications for planetesimal formation. Icarus 165, 438-442, 2003.

Transit research and industry news update : September 2009.

DOT National Transportation Integrated Search

2009-09-01

SPECIAL............................................................................................................................2 : Transportation Secretary Ray LaHood Kicks Off Historic Summit to Tackle Dangers of Distracted Driving.................

Workplace performance of a loose-fitting powered air purifying respirator during nanoparticle synthesis

NASA Astrophysics Data System (ADS)

Koivisto, Antti J.; Aromaa, Mikko; Koponen, Ismo K.; Fransman, Wouter; Jensen, Keld A.; Mäkelä, Jyrki M.; Hämeri, Kaarle J.

2015-04-01

Nanoparticle (particles with diameter ≤100 nm) exposure is recognized as a potentially harmful size fraction for pulmonary particle exposure. During nanoparticle synthesis, the number concentrations in the process room may exceed 10 × 106 cm-3. During such conditions, it is essential that the occupants in the room wear highly reliable high-performance respirators to prevent inhalation exposure. Here we have studied the in-use program protection factor (PPF) of loose-fitting powered air purifying respirators, while workers were coating components with TiO2 or Cu x O y nanoparticles under a hood using a liquid flame spray process. The PPF was measured using condensation particle counters, an electrical low pressure impactor, and diffusion chargers. The room particle concentrations varied from 4 × 106 to 40 × 106 cm-3, and the count median aerodynamic diameter ranged from 32 to 180 nm. Concentrations inside the respirator varied from 0.7 to 7.2 cm-3. However, on average, tidal breathing was assumed to increase the respirator concentration by 2.3 cm-3. The derived PPF exceeded 1.1 × 106, which is more than 40 × 103 times the respirator assigned protection factor. We were unable to measure clear differences in the PPF of respirators with old and new filters, among two male and one female user, or assess most penetrating particle size. This study shows that the loose-fitting powered air purifying respirator provides very efficient protection against nanoparticle inhalation exposure if used properly.

Design and Implementation of the Retinoblastoma Collaborative Laboratory.

PubMed

Qaiser, Seemi; Limo, Alice; Gichana, Josiah; Kimani, Kahaki; Githanga, Jessie; Waweru, Wairimu; Dimba, Elizabeth A O; Dimaras, Helen

2017-01-01

The purpose of this work was to describe the design and implementation of a digital pathology laboratory, the Retinoblastoma Collaborative Laboratory (RbCoLab) in Kenya. The RbCoLab is a central lab in Nairobi that receives retinoblastoma specimens from all over Kenya. Specimens were processed using evidence-based standard operating procedures. Images were produced by a digital scanner, and pathology reports were disseminated online. The lab implemented standard operating procedures aimed at improving the accuracy, completeness, and timeliness of pathology reports, enhancing the care of Kenyan retinoblastoma patients. Integration of digital technology to support pathology services supported knowledge transfer and skills transfer. A bidirectional educational network of local pathologists and other clinicians in the circle of care of the patients emerged and served to emphasize the clinical importance of cancer pathology at multiple levels of care. A 'Robin Hood' business model of health care service delivery was developed to support sustainability and scale-up of cancer pathology services. The application of evidence-based protocols, comprehensive training, and collaboration were essential to bring improvements to the care of retinoblastoma patients in Kenya. When embraced as an integrated component of retinoblastoma care, digital pathology offers the opportunity for frequent connection and consultation for development of expertise over time.

Current and Projected National Security Threats to the United States. Hearing before the Select Committee on Intelligence of the United States Senate, One Hundred Eleventh Congress, Second Session

DTIC Science & Technology

2010-02-02

attacks at Fort Hood and the Little Rock recruiting station to the failed attack on Christmas Day, we have seen an alarming number of terrorist threats...performances, so we must create new methods and tradecraft to recognize terror threats we haven’t seen before. Unfortunately, the process of intelligence...about al-Qa’ida itself, al-Qa’ida-associated groups and al-Qa’ida-inspired terrorists striking the United States. And we’ve seen the reality of all

KSC-04PD-0045

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Three male and one female hooded mergansers swim in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

KSC-98pc1162

NASA Image and Video Library

1998-09-27

KENNEDY SPACE CENTER, FLA. -- The Shuttle Carrier Aircraft rolls to a stop with its piggyback cargo orbiter Atlantis at the Shuttle Landing Facility. In the background is the Vehicle Assembly Building. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999

KSC-98pc1163

NASA Image and Video Library

1998-09-27

KENNEDY SPACE CENTER, FLA. -- Stairs are rolled to the forward opening of the Shuttle Carrier Aircraft with its piggyback cargo, the orbiter Atlantis after it rolls to a stop at the Shuttle Landing Facility. Atlantis returns home after a 10-month stay in the Palmdale, CA, orbiter processing facility undergoing extensive inspections and modifications. They included several upgrades enabling it to support International Space Station missions, such as adding an external airlock for ISS docking missions and installing thinner, lighter thermal protection blankets for weight reduction which will allow it to haul heavier cargo. The flight from Palmdale included a fueling stop in Ft. Hood, TX, and overnight stay at Ft. Campbell, KY. Atlantis will undergo preparations in the Orbiter Processing Facility at KSC for its planned flight in June 1999

KSC-08pd1503

NASA Image and Video Library

2008-05-30

CAPE CANAVERAL, Fla. -- Against the dark sky, lights bathe space shuttle Discovery, revealed after rollback of the rotating service structure in preparation for launch on the STS-124 mission. First motion was at 8:33 p.m. and rollback was complete at 9:07 p.m. The rotating structure provides protected access to the shuttle for changeout and servicing of payloads at the pad. It is supported by a rotating bridge that pivots on a vertical axis on the west side of the pad's flame trench. After the RSS is rolled back, the orbiter is ready for fuel cell activation and external tank cryogenic propellant loading operations. The pad is cleared to the perimeter gate for operations to fill the external tank with about 500,000 gallons of cryogenic propellants used by the shuttle’s main engines. This is done at the pad approximately eight hours before the scheduled launch. Above the orange external tank is the oxygen vent hood, called the "beanie cap," at the end of the gaseous oxygen vent arm extending from the fixed service structure. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below is the orbiter access arm with the White Room at the end, flush against the shuttle. The White Room provides access into the shuttle. The STS-124 mission is the second of three flights launching components to complete the Japan Aerospace Exploration Agency's Kibo laboratory. The shuttle crew will install Kibo's large Japanese Pressurized Module and its remote manipulator system, or RMS. The 14-day flight includes three spacewalks. Launch is scheduled for 5:02 p.m. May 31. Photo credit: NASA/Troy Cryder

Optimization of a reversible hood for protecting a pedestrian's head during car collisions.

PubMed

Huang, Sunan; Yang, Jikuang

2010-07-01

This study evaluated and optimized the performance of a reversible hood (RH) for the prevention of the head injuries of an adult pedestrian from car collisions. The FE model of a production car front was introduced and validated. The baseline RH was developed from the original hood in the validated car front model. In order to evaluate the protective performance of the baseline RH, the FE models of an adult headform and a 50th percentile human head were used in parallel to impact the baseline RH. Based on the evaluation, the response surface method was applied to optimize the RH in terms of the material stiffness, lifting speed, and lifted height. Finally, the headform model and the human head model were again used to evaluate the protective performance of the optimized RH. It was found that the lifted baseline RH can obviously reduce the impact responses of the headform model and the human head model by comparing with the retracted and lifting baseline RH. When the optimized RH was lifted, the HIC values of the headform model and the human head model were further reduced to much lower than 1000. The risk of pedestrian head injuries can be prevented as required by EEVC WG17. Copyright 2009 Elsevier Ltd. All rights reserved.

New Whole-House Solutions Case Study: Hood River Passive House

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-02-01

The Hood River Passive Project was developed by Root Design Build of Hood River Oregon using the Passive House Planning Package (PHPP) to meet all of the requirements for certification under the European Passive House standards. The Passive House design approach has been gaining momentum among residential designers for custom homes and BEopt modeling indicates that these designs may actually exceed the goal of the U.S. Department of Energy's (DOE) Building America program to "reduce home energy use by 30%-50%" (compared to 2009 energy codes for new homes). This report documents the short term test results of the Shift Housemore » and compares the results of PHPP and BEopt modeling of the project. The design includes high R-Value assemblies, extremely tight construction, high performance doors and windows, solar thermal DHW, heat recovery ventilation, moveable external shutters and a high performance ductless mini-split heat pump. Cost analysis indicates that many of the measures implemented in this project did not meet the BA standard for cost neutrality. The ductless mini-split heat pump, lighting and advanced air leakage control were the most cost effective measures. The future challenge will be to value engineer the performance levels indicated here in modeling using production based practices at a significantly lower cost.« less

KSC00pp0637

NASA Image and Video Library

2000-05-18

KENNEDY SPACE CENTER, Fla. -- After rollback of the Rotating Service Structure, Space Shuttle Atlantis can be seen atop the mobile launcher platform (MLP) on Launch Pad 39A. Below the MLP is the flame trench, part of the flame deflector system that insulates pad structures from the intense heat of launch. Made of concrete and refractory brick, the trench is 490 feet long, 48 feet wide and 40 feet high. At the top of the orange external tank can be seen the Gaseous Oxygen Vent Hood, often called the "beanie cap." The hood helps vent gaseous oxygen vapors away from the Space Shuttle. The hood will be raised and retracted two and a half minutes before launch. Abutting the side of Atlantis is the orbiter access arm with the environmental chamber known as the White Room at the end. The White Room provides access to the crew compartment. This will be the third assembly flight to the International Space Station. Liftoff of Space Shuttle Atlantis for the 10-day STS-101 mission is scheduled for about 6:12 a.m. EDT from Launch Pad 39A. Landing is targeted for May 29 at 2:19 a.m. EDT. This is the 98th Shuttle flight and the 21st flight for Shuttle Atlantis

KSC-00pp0637

NASA Image and Video Library

2000-05-18

KENNEDY SPACE CENTER, Fla. -- After rollback of the Rotating Service Structure, Space Shuttle Atlantis can be seen atop the mobile launcher platform (MLP) on Launch Pad 39A. Below the MLP is the flame trench, part of the flame deflector system that insulates pad structures from the intense heat of launch. Made of concrete and refractory brick, the trench is 490 feet long, 48 feet wide and 40 feet high. At the top of the orange external tank can be seen the Gaseous Oxygen Vent Hood, often called the "beanie cap." The hood helps vent gaseous oxygen vapors away from the Space Shuttle. The hood will be raised and retracted two and a half minutes before launch. Abutting the side of Atlantis is the orbiter access arm with the environmental chamber known as the White Room at the end. The White Room provides access to the crew compartment. This will be the third assembly flight to the International Space Station. Liftoff of Space Shuttle Atlantis for the 10-day STS-101 mission is scheduled for about 6:12 a.m. EDT from Launch Pad 39A. Landing is targeted for May 29 at 2:19 a.m. EDT. This is the 98th Shuttle flight and the 21st flight for Shuttle Atlantis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lunden, Melissa M.; Delp, William W.

Effective exhaust hoods can mitigate the indoor air quality impacts of pollutant emissions from residential cooking. This study reports capture efficiencies (CE) measured for cooking generated particles for scripted cooking procedures in a 121-m3 chamber with kitchenette. CEs also were measured for burner produced CO2 during cooking and separately for pots and pans containing water. The study used four exhaust hoods previously tested by Delp and Singer (Environ. Sci. Technol., 2012, 46, 6167-6173). For pan-frying a hamburger over medium heat on the back burner, CEs for particles were similar to those for burner produced CO2 and mostly above 80percent. Formore » stir-frying green beans in a wok (high heat, front burner), CEs for burner CO2 during cooking varied by hood and airflow: CEs were 34-38percent for low (51?68 L s-1) and 54?72percent for high (109?138 L s-1) settings. CEs for 0.3?2.0 ?m particles during front burner stir-frying were 3?11percent on low and 16?70percent on high settings. Results indicate that CEs measured for burner CO2 are not predictive of CEs of cooking-generated particles under all conditions, but they may be suitable to identify devices with CEs above 80percent both for burner combustion products and for cooking-related particles.« less

KSC-06pd2672

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Under a clear blue sky, Space Shuttle Discovery is ready for launch of mission STS-116 from Launch Pad 39B. At far left is the rotating service structure, rolled back to enable launch. Beneath Discovery's wings are the tail masts, which provide several umbilical connections to the orbiter, including a liquid-oxygen line through one and a liquid-hydrogen line through another. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/Ken Thornsley

KSC-06pd2671

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Under a clear blue sky, Space Shuttle Discovery is ready for launch of mission STS-116 from Launch Pad 39B. Atop the fixed service structure at left looms the 80-foot-high lightning mast, part of the lightning protection system on the pad. Beneath Discovery's wings are the tail masts, which provide several umbilical connections to the orbiter, including a liquid-oxygen line through one and a liquid-hydrogen line through another. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/Ken Thornsley

A Dissolved Oxygen Threshold for Shifts in Bacterial Community Structure in a Seasonally Hypoxic Estuary.

PubMed

Spietz, Rachel L; Williams, Cheryl M; Rocap, Gabrielle; Horner-Devine, M Claire

2015-01-01

Pelagic ecosystems can become depleted of dissolved oxygen as a result of both natural processes and anthropogenic effects. As dissolved oxygen concentration decreases, energy shifts from macrofauna to microorganisms, which persist in these hypoxic zones. Oxygen-limited regions are rapidly expanding globally; however, patterns of microbial communities associated with dissolved oxygen gradients are not yet well understood. To assess the effects of decreasing dissolved oxygen on bacteria, we examined shifts in bacterial community structure over space and time in Hood Canal, Washington, USA-a glacial fjord-like water body that experiences seasonal low dissolved oxygen levels known to be detrimental to fish and other marine organisms. We found a strong negative association between bacterial richness and dissolved oxygen. Bacterial community composition across all samples was also strongly associated with the dissolved oxygen gradient, and significant changes in bacterial community composition occurred at a dissolved oxygen concentration between 5.18 and 7.12 mg O2 L(-1). This threshold value of dissolved oxygen is higher than classic definitions of hypoxia (<2.0 mg O2 L(-1)), suggesting that changes in bacterial communities may precede the detrimental effects on ecologically and economically important macrofauna. Furthermore, bacterial taxa responsible for driving whole community changes across the oxygen gradient are commonly detected in other oxygen-stressed ecosystems, suggesting that the patterns we uncovered in Hood Canal may be relevant in other low oxygen ecosystems.

Watershed sediment source fingerprinting: a view under the hood

NASA Astrophysics Data System (ADS)

Smith, H.

2015-12-01

Sediment source fingerprinting procedures involve the discrimination of sediment sources based on physical and chemical properties and estimation of the contributions from those sources to mixtures of fine-grained sediment transported within watersheds. Sources of sediment widely considered include agricultural land uses, channel banks and geological zones. There has been a tendency in the literature for sediment fingerprinting to be presented as a technique that can deliver accurate and precise information on source contributions to sediment across a range of environments. However, recent research indicates that such a view of sediment fingerprinting cannot presently be supported. Furthermore, many past papers lack transparency in data processing and presentation that prevents the critical assessment of results and hinders wider uptake of the technique. Therefore, this contribution aims to delve 'under the hood' of sediment fingerprinting to promote further discussion and debate over future research needs and method limitations. It draws on important developments from the last two years concerning the effect of (i) tracer selection, (ii) tracer behaviour during transport, (iii) corrections to tracer datasets and (iv) the choice of mixing model on predictions of sediment source contributions. Sediment fingerprinting has the potential to make a very significant contribution to the measurement of contemporary sediment sources in watersheds, but cannot be viewed as an 'off-the-shelf' technique for widespread application until important challenges have been addressed.

Not in wilderness: African vulture strongholds remain in areas with high human density

PubMed Central

Granadeiro, José Pedro; Monteiro, Hamilton; Nuno, Ana; Lecoq, Miguel; Cardoso, Paulo; Regalla, Aissa; Catry, Paulo

2018-01-01

Vultures constitute an important functional group in many ecosystems, providing crucial ecosystem services both in natural and humanized environments. These scavengers are facing massive declines worldwide, but in several African countries virtually nothing is known on populations’ status and threats, hampering the development of adequate conservation strategies. In Guinea-Bissau, globally important populations of Hooded Necrosyrtes monachus and African white-backed vultures Gyps africanus were recently reported. Using the country as a study area, we aim to characterize human-vulture interactions in West Africa applying a multidisciplinary approach. We assessed the status and distribution of vulture populations using data from 1711 km of roadside transects, examined predictors of their distribution, and produced a nationwide population estimate for the Hooded Vulture, using an innovative method based on the relationship between the size of human population in settlements and vulture numbers. We conducted 47 stakeholder interviews to assess perceived roles played by vultures, and to investigate potential anthropogenic threats. Hooded vultures were strongly associated with high human population densities, whereas no relation was found between African white-backed and Rüppell’s vultures and any of the tested predictors, which included cattle density, precipitation and Normalized Difference Vegetation Index, among others. We estimate a national population of 43347 Hooded vultures, the largest population reported in the species range. Respondents were generally aware of the services provided by vultures, especially waste and carcass removal, including in urban areas. Hunting for witchcraft and traditional medicine was the most frequently recognised threat, while poisoning was ranked as having the highest impact. We hypothesise that poisoning-related mortality may be affecting African white-backed and Rüppell’s vultures’ distribution and explain their scarcity in apparently highly suitable habitats. Our results suggest a mutualistic rather than a commensalistic relationship between vultures and humans, with important implications for designing and implementing conservation strategies. PMID:29385172

Not in wilderness: African vulture strongholds remain in areas with high human density.

PubMed

Henriques, Mohamed; Granadeiro, José Pedro; Monteiro, Hamilton; Nuno, Ana; Lecoq, Miguel; Cardoso, Paulo; Regalla, Aissa; Catry, Paulo

2018-01-01

Vultures constitute an important functional group in many ecosystems, providing crucial ecosystem services both in natural and humanized environments. These scavengers are facing massive declines worldwide, but in several African countries virtually nothing is known on populations' status and threats, hampering the development of adequate conservation strategies. In Guinea-Bissau, globally important populations of Hooded Necrosyrtes monachus and African white-backed vultures Gyps africanus were recently reported. Using the country as a study area, we aim to characterize human-vulture interactions in West Africa applying a multidisciplinary approach. We assessed the status and distribution of vulture populations using data from 1711 km of roadside transects, examined predictors of their distribution, and produced a nationwide population estimate for the Hooded Vulture, using an innovative method based on the relationship between the size of human population in settlements and vulture numbers. We conducted 47 stakeholder interviews to assess perceived roles played by vultures, and to investigate potential anthropogenic threats. Hooded vultures were strongly associated with high human population densities, whereas no relation was found between African white-backed and Rüppell's vultures and any of the tested predictors, which included cattle density, precipitation and Normalized Difference Vegetation Index, among others. We estimate a national population of 43347 Hooded vultures, the largest population reported in the species range. Respondents were generally aware of the services provided by vultures, especially waste and carcass removal, including in urban areas. Hunting for witchcraft and traditional medicine was the most frequently recognised threat, while poisoning was ranked as having the highest impact. We hypothesise that poisoning-related mortality may be affecting African white-backed and Rüppell's vultures' distribution and explain their scarcity in apparently highly suitable habitats. Our results suggest a mutualistic rather than a commensalistic relationship between vultures and humans, with important implications for designing and implementing conservation strategies.

Linking a dermal permeation and an inhalation model to a simple pharmacokinetic model to study airborne exposure to di(n-butyl) phthalate.

PubMed

Lorber, Matthew; Weschler, Charles J; Morrison, Glenn; Bekö, Gabriel; Gong, Mengyan; Koch, Holger M; Salthammer, Tunga; Schripp, Tobias; Toftum, Jørn; Clausen, Geo

2017-11-01

Six males clad only in shorts were exposed to high levels of airborne di(n-butyl) phthalate (DnBP) and diethyl phthalate (DEP) in chamber experiments conducted in 2014. In two 6 h sessions, the subjects were exposed only dermally while breathing clean air from a hood, and both dermally and via inhalation when exposed without a hood. Full urine samples were taken before, during, and for 48 h after leaving the chamber and measured for key DnBP and DEP metabolites. The data clearly demonstrated high levels of DnBP and DEP metabolite excretions while in the chamber and during the first 24 h once leaving the chamber under both conditions. The data for DnBP were used in a modeling exercise linking dose models for inhalation and transdermal permeation with a simple pharmacokinetic model that predicted timing and mass of metabolite excretions. These models were developed and calibrated independent of these experiments. Tests included modeling of the "hood-on" (transdermal penetration only), "hood-off" (both inhalation and transdermal) scenarios, and a derived "inhalation-only" scenario. Results showed that the linked model tended to duplicate the pattern of excretion with regard to timing of peaks, decline of concentrations over time, and the ratio of DnBP metabolites. However, the transdermal model tended to overpredict penetration of DnBP such that predictions of metabolite excretions were between 1.1 and 4.5 times higher than the cumulative excretion of DnBP metabolites over the 54 h of the simulation. A similar overprediction was not seen for the "inhalation-only" simulations. Possible explanations and model refinements for these overpredictions are discussed. In a demonstration of the linked model designed to characterize general population exposures to typical airborne indoor concentrations of DnBP in the United States, it was estimated that up to one-quarter of total exposures could be due to inhalation and dermal uptake.

Ocean Carbon and Biogeochemistry Scoping Workshop on Terrestrial and Coastal Carbon Fluxes in the Gulf of Mexico, St. Petersburg, FL

NASA Technical Reports Server (NTRS)

Robbins, L. L.; Coble, P. G.; Clayton, T. D.; Cai, W. J.

2008-01-01

Despite their relatively small surface area, ocean margins may have a significant impact on global biogeochemical cycles and, potentially, the global air-sea fluxes of carbon dioxide. Margins are characterized by intense geochemical and biological processing of carbon and other elements and exchange large amounts of matter and energy with the open ocean. The area-specific rates of productivity, biogeochemical cycling, and organic/inorganic matter sequestration are high in coastal margins, with as much as half of the global integrated new production occurring over the continental shelves and slopes (Walsh, 1991; Doney and Hood, 2002; Jahnke, in press). However, the current lack of knowledge and understanding of biogeochemical processes occurring at the ocean margins has left them largely ignored in most of the previous global assessments of the oceanic carbon cycle (Doney and Hood, 2002). A major source of North American and global uncertainty is the Gulf of Mexico, a large semi-enclosed subtropical basin bordered by the United States, Mexico, and Cuba. Like many of the marginal oceans worldwide, the Gulf of Mexico remains largely unsampled and poorly characterized in terms of its air-sea exchange of carbon dioxide and other carbon fluxes. The goal of the workshop was to bring together researchers from multiple disciplines studying terrestrial, aquatic, and marine ecosystems to discuss the state of knowledge in carbon fluxes in the Gulf of Mexico, data gaps, and overarching questions in the Gulf of Mexico system. The discussions at the workshop were intended to stimulate integrated studies of marine and terrestrial biogeochemical cycles and associated ecosystems that will help to establish the role of the Gulf of Mexico in the carbon cycle and how it might evolve in the face of environmental change.

System and method for producing metallic iron

DOEpatents

Bleifuss, Rodney L; Englund, David J; Iwasaki, Iwao; Fosnacht, Donald R; Brandon, Mark M; True, Bradford G

2013-09-17

A hearth furnace for producing metallic iron material has a furnace housing having a drying/preheat zone, a conversion zone, a fusion zone, and optionally a cooling zone, the conversion zone is between the drying/preheat zone and the fusion zone. A moving hearth is positioned within the furnace housing. A hood or separation barrier within at least a portion of the conversion zone, fusion zone or both separates the fusion zone into an upper region and a lower region with the lower region adjacent the hearth and the upper region adjacent the lower region and spaced from the hearth. An injector introduces a gaseous reductant into the lower region adjacent the hearth. A combustion region may be formed above the hood or separation barrier.

Geothermal segmentation of the Cascade Range in the USA

USGS Publications Warehouse

Guffanti, Marianne; Muffler, L.J.; Mariner, R.H.; Sherrod, D.R.; Smith, James G.; Blackwell, D.D.; Weaver, C.S.

1990-01-01

Characteristics of the crustal thermal regime of the Quaternary Cascades vary systematically along the range. Spatially congruent changes in volcanic vent distribution, volcanic extrusion rate, hydrothermal discharge rate, and regional conductive heat flow define 5 geothermal segments. These segments are, from north to south: (1) the Washington Cascades north of Mount Rainier, (2) the Cascades from Mount Rainier to Mount Hood, (3) the Oregon Cascades from south of Mount Hood to the California border, (4) northernmost California, including Mount Shasta and Medicine Lake volcano, and (5) the Lassen region of northern California. This segmentation indicates that geothermal resource potential is not uniform in the Cascade Range. Potential varies from high in parts of Oregon to low in Washington north of Mount Rainier.

Application of energy derivative method to determine the structural components' contribution to deceleration in crashes.

PubMed

Nagasaka, Kei; Mizuno, Koji; Thomson, Robert

2018-03-26

For occupant protection, it is important to understand how a car's deceleration time history in crashes can be designed using efficient of energy absorption by a car body's structure. In a previous paper, the authors proposed an energy derivative method to determine each structural component's contribution to the longitudinal deceleration of a car passenger compartment in crashes. In this study, this method was extended to 2 dimensions in order to analyze various crash test conditions. The contribution of each structure estimated from the energy derivative method was compared to that from a conventional finite element (FE) analysis method using cross-sectional forces. A 2-dimensional energy derivative method was established. A simple FE model with a structural column connected to a rigid body was used to confirm the validity of this method and to compare with the result of cross-sectional forces determined using conventional analysis. Applying this method to a full-width frontal impact simulation of a car FE model, the contribution and the cross-sectional forces of the front rails were compared. In addition, this method was applied to a pedestrian headform FE simulation in order to determine the influence of the structural and inertia forces of the hood structures on the deceleration of the headform undergoing planar motion. In an oblique impact of the simple column and rigid body model, the sum of the contributions of each part agrees with the rigid body deceleration, which indicates the validity of the 2-dimensional energy derivative method. Using the energy derivative method, it was observed that each part of the column contributes to the deceleration of the rigid body by collapsing in the sequence from front to rear, whereas the cross-sectional force at the rear of the column cannot detect the continuous collapse. In the full-width impact of a car, the contributions of the front rails estimated in the energy derivative method was smaller than that using the cross-sectional forces at the rear end of the front rails due to the deformation of the passenger compartment. For a pedestrian headform impact, the inertial and structural forces of the hood contributed to peaks of the headform deceleration in the initial and latter phases, respectively. Using the 2-dimensional energy derivative method, it is possible to analyze an oblique impact or a pedestrian headform impact with large rotations. This method has advantages compared to the conventional approach using cross-sectional forces because the contribution of each component to system deceleration can be determined.

40 CFR 63.1651 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... continuously monitor relative particulate matter loadings. Capture system means the equipment (including hoods... due to wind or mechanical inducement such as vehicle traffic. Fugitive dust sources include plant...

40 CFR 63.1651 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... continuously monitor relative particulate matter loadings. Capture system means the equipment (including hoods... due to wind or mechanical inducement such as vehicle traffic. Fugitive dust sources include plant...

40 CFR 63.1651 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... continuously monitor relative particulate matter loadings. Capture system means the equipment (including hoods... due to wind or mechanical inducement such as vehicle traffic. Fugitive dust sources include plant...

Precipitation-centered Conceptual Model for Sub-humid Uplands in Lampasas Cut Plains, TX

NASA Astrophysics Data System (ADS)

Potter, S. R.; Tu, M.; Wilcox, B. P.

2011-12-01

Conceptual understandings of dominant hydrological processes, system interactions and feedbacks, and external forcings operating within catchments often defy simple definition and explanation, especially catchments encompassing transition zones, degraded landscapes, rapid development, and where climate forcings exhibit large variations across time and space. However, it is precisely those areas for which understanding and knowledge are most needed to innovate sustainable management strategies and counter past management blunders and failed restoration efforts. The cut plain of central Texas is one such area. Complex geographic and climatic factors lead to spatially and temporally variable precipitation having frequent dry periods interrupted by intense high-volume precipitation. Fort Hood, an army post located in the southeast cut plain contains landscapes ranging from highly degraded to nearly pristine with a topography mainly comprised of flat-topped mesas separated by broad u-shaped valleys. To understand the hydrology of the area and responses to wet-dry cycles we analyzed 4-years of streamflow and rainfall from 8 catchments, sized between 1819 and 16,000 ha. Since aquifer recharge/discharge and surface stream-groundwater interactions are unimportant, we hypothesized a simple conceptual model driven by precipitation and radiative forcings and having stormflow, baseflow, ET, and two hypothetical storage components. The key storage component was conceptualized as a buffer that was highly integrated with the ET component and exerted controls on baseflow. Radiative energy controlled flux from the buffer to ET. We used the conceptual model in making a bimonthly hydrologic budget, which included buffer volumes and a deficit-surplus indicator. Through the analysis, we were led to speculate that buffer capacity plays key roles in these landscapes and even relatively minor changes in capacity, due to soil compaction for example, might lead to ecological shifts. The model led us to other hypotheses concerning stormflow mechanisms and controls on baseflow, which we then tested against observations. It was instructive that such a simple model could lead to interesting new theories.

40 CFR 60.601 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... means the water, solvent, or other chemical bath into which the polymer or prepolymer (partially reacted..., transportation, collection, concentration, and purification of organic solvents. It may include enclosures, hoods...

40 CFR 60.601 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... means the water, solvent, or other chemical bath into which the polymer or prepolymer (partially reacted..., transportation, collection, concentration, and purification of organic solvents. It may include enclosures, hoods...

40 CFR 60.601 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... means the water, solvent, or other chemical bath into which the polymer or prepolymer (partially reacted..., transportation, collection, concentration, and purification of organic solvents. It may include enclosures, hoods...

40 CFR 60.601 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... means the water, solvent, or other chemical bath into which the polymer or prepolymer (partially reacted..., transportation, collection, concentration, and purification of organic solvents. It may include enclosures, hoods...

40 CFR 60.601 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... means the water, solvent, or other chemical bath into which the polymer or prepolymer (partially reacted..., transportation, collection, concentration, and purification of organic solvents. It may include enclosures, hoods...

Vigilance and Activity Time-Budget Adjustments of Wintering Hooded Cranes, Grus monacha, in Human-Dominated Foraging Habitats

PubMed Central

Li, Chunlin; Zhou, Lizhi; Xu, Li; Zhao, Niannian; Beauchamp, Guy

2015-01-01

Due to loss and degradation of natural wetlands, waterbirds increasingly rely on surrounding human-dominated habitats to obtain food. Quantifying vigilance patterns, investigating the trade-off among various activities, and examining the underlying mechanisms will help us understand how waterbirds adapt to human-caused disturbances. During two successive winters (November-February of 2012–13 and 2013–14), we studied the hooded crane, Grus monacha, in the Shengjin Lake National Nature Reserve (NNR), China, to investigate how the species responds to human disturbances through vigilance and activity time-budget adjustments. Our results showed striking differences in the behavior of the cranes when foraging in the highly disturbed rice paddy fields found in the buffer zone compared with the degraded natural wetlands in the core area of the NNR. Time spent vigilant decreased with flock size and cranes spent more time vigilant in the human-dominated buffer zone. In the rice paddy fields, the birds were more vigilant but also fed more at the expense of locomotion and maintenance activities. Adult cranes spent more time vigilant and foraged less than juveniles. We recommend habitat recovery in natural wetlands and community co-management in the surrounding human-dominated landscape for conservation of the hooded crane and, generally, for the vast numbers of migratory waterbirds wintering in the middle and lower reaches of the Yangtze River floodplain. PMID:25768111

Vigilance and activity time-budget adjustments of wintering hooded cranes, Grus monacha, in human-dominated foraging habitats.

PubMed

Li, Chunlin; Zhou, Lizhi; Xu, Li; Zhao, Niannian; Beauchamp, Guy

2015-01-01

Due to loss and degradation of natural wetlands, waterbirds increasingly rely on surrounding human-dominated habitats to obtain food. Quantifying vigilance patterns, investigating the trade-off among various activities, and examining the underlying mechanisms will help us understand how waterbirds adapt to human-caused disturbances. During two successive winters (November-February of 2012-13 and 2013-14), we studied the hooded crane, Grus monacha, in the Shengjin Lake National Nature Reserve (NNR), China, to investigate how the species responds to human disturbances through vigilance and activity time-budget adjustments. Our results showed striking differences in the behavior of the cranes when foraging in the highly disturbed rice paddy fields found in the buffer zone compared with the degraded natural wetlands in the core area of the NNR. Time spent vigilant decreased with flock size and cranes spent more time vigilant in the human-dominated buffer zone. In the rice paddy fields, the birds were more vigilant but also fed more at the expense of locomotion and maintenance activities. Adult cranes spent more time vigilant and foraged less than juveniles. We recommend habitat recovery in natural wetlands and community co-management in the surrounding human-dominated landscape for conservation of the hooded crane and, generally, for the vast numbers of migratory waterbirds wintering in the middle and lower reaches of the Yangtze River floodplain.

Accurate analysis of prevalence of coccidiosis in individually identified wild cranes in inhabiting and migrating populations in Japan.

PubMed

Honma, Hajime; Suyama, Yoshihisa; Watanabe, Yuki; Matsumoto, Fumio; Nakai, Yutaka

2011-11-01

Eimeria gruis and E. reichenowi cause coccidiosis, a major parasitic disease of cranes. By non-invasive molecular approaches, we investigated the prevalence and genetic characterization of pathogens in two Japanese crane habitats; one is Hokkaido inhabited by the endangered red-crowned crane, and the other is Izumi in Kyushu where populations that consist mainly of vulnerable hooded and white-naped cranes migrate in winter. The non-invasively collected faecal samples from each wintering population were first subjected to host genomic DNA-targeted analyses to determine the sample origin and avoid sample redundancy. Extremely high prevalence was observed in the Izumi populations (> 90%) compared with the Hokkaido population (18-30%) by examining 470 specimens by microscopy and PCR-based capillary electrophoresis (PCR-CE), using genetic markers in the second internal transcribed spacer (ITS2). Correspondence analysis of PCR-CE data revealed differences in community composition of coccidia between hooded and white-naped cranes. 18S rRNA and ITS2 sequences were determined from single oocysts excreted by red-crowned and hooded cranes. Phylogenetic analysis of 18S rRNA suggested that E. reichenowi was polyphyletic while E. gruis was monophyletic. Together with PCR-CE data, these results indicate different host specificity among the E. reichenowi type. Our data suggest that E. reichenowi comprises multiple species. © 2011 Society for Applied Microbiology and Blackwell Publishing Ltd.

The use of paleo-imaging and microbiological testing in the analysis of antique cultural material: multislice tomography, and microbial analysis of the Trogir Cathedral cope hood depicting St. Martin and a beggar.

PubMed

Cavka, Mislav; Petaros, Anja; Kavur, Lovro; Skrlin, Jasenka; Mlinaric Missoni, Emilija; Jankovic, Ivor; Brkljacic, Boris

2013-01-01

Paleoradiology is the study of biological and other materials from archeological settings through the use of various medical imaging techniques. Although it is most often used in the scientific study of ancient human remains, it can also be used to study metals, ceramics, paper, and clothes. The aim of this study was to test two paleoimaging techniques (MSCT and mammography) in the analysis of an important Croatian liturgical vestment: the hood of a bishop's cope from St. Lawrence's Treasury in Trogir depicting St. Martin and a beggar. To ensure a safe environment for scientists participating in the analysis, a preliminary microbiological analysis was performed, which contributed to the database of microbiological flora found on Croatian archeological remains and relics studied to date. Due to a great amount of metal filaments, the paleoradiological analysis did not produce satisfactory results. However, a digitally enhanced image clearly showed fine metal embroidery of the hood that was not so easily perceived by naked eye. This article argues in favor of expanding paleoradiological studies on materials other than human remains and also of publishing unsatisfactory results, as important lessons for future development of techniques and methods to analyze ancient remains and seek answers about human historical and cultural heritage.

NPF MECHANICAL CELL NaK DISPOSAL AND FUME ABATEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rey, G.

Some of the fuels originally scheduled for processing in the nonproduction fuel (NPF) processing program incorporated sodium or sodium- potassium alloy (NaK) as the bonding material between stainless-steel cladding and the uranium or uranium-molybdenum alloy core. Because of the special hazards involved in handling NaK, studies were made to determine safe methods for processing NaK-containing fuels. An underwater NaK dispensing system was installed, and tests were made to determine the characteristics of the NaK-water reaction. The equipment consisted of a dispenser, reaction pan, and off-gas scrubber. After initinl studies, a prototype test was made wherein U-Mo canned slugs containing NaKmore » reservoirs were hack sawed underwater. The studies demonstrated that the NaK reservoirs can be safely deactivated by hack sawing under a submerged hood in a shallow water bath. (W.L.H.)« less

Methane-Powered Vehicles

NASA Technical Reports Server (NTRS)

1982-01-01

Liquid methane is beginning to become an energy alternative to expensive oil as a power source for automotive vehicles. Methane is the principal component of natural gas, costs less than half as much as gasoline, and its emissions are a lot cleaner than from gasoline or diesel engines. Beech Aircraft Corporation's Boulder Division has designed and is producing a system for converting cars and trucks to liquid methane operation. Liquid methane (LM) is a cryogenic fuel which must be stored at a temperature of 260 degrees below zero Fahrenheit. The LM system includes an 18 gallon fuel tank in the trunk and simple "under the hood" carburetor conversion equipment. Optional twin-fuel system allows operator to use either LM or gasoline fuel. Boulder Division has started deliveries for 25 vehicle conversions and is furnishing a liquid methane refueling station. Beech is providing instruction for Northwest Natural Gas, for conversion of methane to liquid state.

Accessory Devices Frequently Used for Endoscopic Submucosal Dissection

PubMed Central

Choi, Hyuk Soon; Chun, Hoon Jai

2017-01-01

Endoscopic submucosal dissection (ESD) is increasingly being considered an essential component of treatment for early gastrointestinal cancers and subepithelial tumors. The ESD technique owes its popularity to the development of sophisticated instruments used for ESD. With an increase in the number of ESD procedures performed, there is rapid development in the number and types of endoscopic accessory devices used for such procedures. Despite the large numbers of new devices developed and marketed, the use of ESD instruments and accessory devices is largely determined by individual preferences and experiences. Accessory devices frequently used during ESD are important tools for ESD techniques. Each instrument possesses characteristic advantages and disadvantages associated with its use, and no one instrument is superior in all respects to others. In this article, we review the characteristics of endoscopic electrical knives, cap and hood, and hemostatic devices commonly used in ESD. PMID:28609818

Equipment & New Products

ERIC Educational Resources Information Center

Poitras, Adrian W., Ed.

1976-01-01

Listed are a number of materials including a spectrophotometer, power meter, vacuum pump, fume hood, cart system, and others. The source of the product and a brief description are given for each. (RH)

Dark and Light Titan

NASA Image and Video Library

2010-09-08

NASA Cassini spacecraft examines Titan dark and light seasonal hemispheric dichotomy as it images the moon with a filter sensitive to near-infrared light. This image also shows Titan north polar hood.

Earth observations taken from orbiter Discovery during STS-85 mission

NASA Image and Video Library

1997-08-11

STS085-716-081 (7-19 August 1997) --- This photograph provides a southerly view from Vancouver, B. C. in the foreground, to Portland, Oregon near the top. Coastal stratus, a common occurrence, hugs the Pacific coastline and laps into Puget sound. The silty Fraser River cuts through Vancouver and empties into Puget Sound with a large, milky plume of sediment (bottom). Near the top of the image, the Columbia River runs across the Cascades (between Mt. Adams and Mt. Hood) and the Coast Ranges to the Pacific Ocean. Snow caps the highest peaks of the Olympic Mountains (near center), and the Cascade volcanoes of Rainier (closest to Seattle), Adams and Hood (top). The smaller, gray mountain just south (above and right) of Rainier is Mt. St. Helens.

MOUNT HOOD WILDERNESS AND ADJACENT AREAS, OREGON.

USGS Publications Warehouse

Keith, T.E.C.; Causey, J.D.

1984-01-01

A mineral survey of the Mount Hood Wilderness, Oregon, was conducted. Geochemical data indicate two areas of substantiated mineral-resource potential containing weak epithermal mineralization: an area of the north side of Zigzag Mountain where vein-type lead-zinc-silver deposits occur and an area of the south side of Zigzag Mountain, where the upper part of a quartz diorite pluton has propylitic alteration associated with mineralization of copper, gold, silver, lead, and zinc in discontinuous veins. Geothermal-resource potential for low- to intermediate-temperature (less than 248 degree F) hot-water systems in the wilderness is probable in these areas. Part of the wilderness is classified as a Known Geothermal Resource Area (KGRA), which is considered to have probable geothermal-resource potential, and two parts of the wilderness have been included in geothermal lease areas.

FAA Forecast Conference Proceedings (8th) Held at Arlington, Virginia on 24 February 1983.

DTIC Science & Technology

1983-02-01

23/81 12/31/81 97 14 2 9 Hermiston 4/24/81 4/24/82 109 11 7 20 Hood River 2/04/81 1/19/82 122 13 5 15 LaGrande 5/29/81 4/30/82 101 8 5 32 Lebanon...Puyallup 1/16/81 12/23/81 32 4 5 10 Richland 5/06/81 4/22/82 89 6 3 30 Skagit 1/27/81 12/10/81 56 7 4 15 Wenatchee 1/22/81 12/14/81 62 7 5 20 IDAHO...Troutdale 21% 31% 29% 19t NO IFR Hood River 12 27 45 1e Pendleton 26% 31% 27% 16%" IFR Hermiston 20 30 28 22 La Grande 10 26 52 12 Wasco State 61 14

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Ft. Hood Military Base Outside Killeen, Texas. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geiger, J.; Lisell, L.; Mosey, G.

2013-10-01

The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative through the Region 6 contract, selected Ft. Hood Army Base in Killeen, Texas, for a feasibility study of renewable energy production. The National Renewable Energy Laboratory (NREL) provided technical assistance for this project. The purpose of this study is to assess the site for possible photovoltaic (PV) system installations and estimate the cost, performance, and site impacts of different PV options. In addition, the report recommends financing options that could assist in the implementation of a PV system at the site.

Pollutant Concentrations and Emission Rates from Scripted Natural Gas Cooking Burner Use in Nine Northern California Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, Brett C.; Delp, William W.; Lorenzetti, David M.

METHODS: Combustion pollutant concentrations were measured during the scripted operation of natural gas cooking burners in nine homes. In addition to a base condition of closed windows, no forced air unit (FAU) use, and no mechanical exhaust, additional experiments were conducted while operating an FAU and/or vented range hood. Test homes included a 26m2 two-room apartment, a 134m2 first floor flat, and seven detached homes of 117–226m2. There were four single-story, four two-story and one 1.5 story homes. Cooktop use entailed boiling and simmering activities, using water as a heat sink. Oven and broiler use also were simulated. Time-resolved concentrationsmore » of carbon dioxide (CO2), nitric oxide (NO), nitrogen oxides (NOX), nitrogen dioxide (NO2), particles with diameters of 6 nm or larger (PN), carbon monoxide (CO), and fine particulate matter (PM2.5) were measured in the kitchen (K) and bedroom area (BR) of each home. CO2, NO, NO2, and PN data from sequential experiments were analyzed to quantify the contribution of burner use to the highest 1h and 4h time-integrated concentrations in each room. RESULTS: Four of the nine homes had kitchen 1h NO2 exceed the national ambient air quality standard (100 ppb). Two other homes had 1h NO2 exceed 50 ppb in the kitchen, and three had 1h NO2 above 50 ppb in the bedroom, suggesting substantial exposures to anyone at home when burners are used for a single substantial event. In all homes, the highest 1h kitchen PN exceeded 2 x105 cm-3-h, and the highest 4h PN exceeded 3 x105 cm-3-hr in all homes. The lowest 1h kitchen/bedroom ratios were 1.3–2.1 for NO in the apartment and two open floor plan homes. The largest K/BR ratios of 1h NO2 were in a two-story 1990s home retrofitted for deep energy savings: ratios in this home were 3.3 to 6.6. Kitchen 1h ratios of NO, NO2 and PN to CO2 were used to calculate fuel normalized emission factors (ng J-1). Range hood use substantially reduced cooking burner pollutant concentrations both in the kitchen and bedroom of several homes. A hood with large capture volume and a measured flow of 108 L/s reduced concentrations 80-95%. IMPLICATIONS: These measurements demonstrate that operation of natural gas cooking burners without venting can cause short-term kitchen concentrations of NO2 to exceed the US outdoor health standard, and can elevate concentrations of NO, NO2, and ultrafine particles throughout the home. Results are generally consistent with a recent simulation study that estimated widespread 1h NO2 exposures exceeding 100 ppb in homes that use gas burners without venting. While operating a venting range hood can greatly reduce pollutant levels from burner use (and presumably from cooking as well), performance varies widely across hoods. Increased awareness of the need to ventilate when cooking would substantially reduce in-home exposure to NO2 and ultrafine particles in California homes. Helping consumers select effective hoods, for example by publishing capture efficiency performance ratings, also would help reduce exposure.« less

[Appropriate dust control measures for jade carving operations].

PubMed

Liu, Jiang; Wang, Qiushui; Liu, Guangquan

2002-12-01

To provide the appropriate dust control measures for jade carving operations. Dust concentrations in the workplace were measured according to GB/T 5748-85. Ventilation system of dust control were measured according to GB/T 16157-1996. Dust particle size distributions for different sources and particle size fraction collecting efficiencies of the dust collectors were measured with WY-1 in-stack 7 stage cascade impactors. On the basis of adopting wet process in the carving operations, local exhaust ventilation system for dust control was installed, which included: the special designed slot exhaust hoods with hood face velocity of 2.5 m/s and exhaust volume of 600 m3/h. The pipe sizes were determined according to the air volume passing through the pipe and the reasonable air velocities. Impinging scrubber or bag filter dust collector were selected to treat the dust laden air from the local exhaust ventilation system, which gave a total collecting efficiency of 97% for impinging scrubber and 98% for bag filter; The type of fan and its size were selected according to the total air volume of the ventilation system and maximum total pressure needed for the longest pipe line plus the pressure drop of the dust collector. Practical application showed that, after installation and use of the appropriate dust control measures, the dust concentrations in the workplaces could meet or nearly meet the national hygienic standard and the dust laden air at the local exhaust ventilation system could meet the national emission standard.

A Dissolved Oxygen Threshold for Shifts in Bacterial Community Structure in a Seasonally Hypoxic Estuary

PubMed Central

Spietz, Rachel L.; Williams, Cheryl M.; Rocap, Gabrielle; Horner-Devine, M. Claire

2015-01-01

Pelagic ecosystems can become depleted of dissolved oxygen as a result of both natural processes and anthropogenic effects. As dissolved oxygen concentration decreases, energy shifts from macrofauna to microorganisms, which persist in these hypoxic zones. Oxygen-limited regions are rapidly expanding globally; however, patterns of microbial communities associated with dissolved oxygen gradients are not yet well understood. To assess the effects of decreasing dissolved oxygen on bacteria, we examined shifts in bacterial community structure over space and time in Hood Canal, Washington, USA−a glacial fjord-like water body that experiences seasonal low dissolved oxygen levels known to be detrimental to fish and other marine organisms. We found a strong negative association between bacterial richness and dissolved oxygen. Bacterial community composition across all samples was also strongly associated with the dissolved oxygen gradient, and significant changes in bacterial community composition occurred at a dissolved oxygen concentration between 5.18 and 7.12 mg O2 L-1. This threshold value of dissolved oxygen is higher than classic definitions of hypoxia (<2.0 mg O2 L-1), suggesting that changes in bacterial communities may precede the detrimental effects on ecologically and economically important macrofauna. Furthermore, bacterial taxa responsible for driving whole community changes across the oxygen gradient are commonly detected in other oxygen-stressed ecosystems, suggesting that the patterns we uncovered in Hood Canal may be relevant in other low oxygen ecosystems. PMID:26270047

High Efficiency Particulate Air (HEPA) Filter Generation, Characterization, and Disposal Experiences at the Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coffey, D. E.

2002-02-28

High Efficiency Particulate Air filtration is an essential component of the containment and ventilation systems supporting the research and development activities at the Oak Ridge National Laboratory. High Efficiency Particulate Air filters range in size from 7.6cm (3 inch) by 10.2 cm (4 inch) cylindrical shape filters to filter array assemblies up to 2.1 m (7 feet) high by 1.5 m (5 feet) wide. Spent filters are grouped by contaminates trapped in the filter media and become one of the components in the respective waste stream. Waste minimization and pollution prevention efforts are applied for both radiological and non-radiological applications.more » Radiological applications include laboratory hoods, glove boxes, and hot cells. High Efficiency Particulate Air filters also are generated from intake or pre-filtering applications, decontamination activities, and asbestos abatement applications. The disposal avenues include sanitary/industrial waste, Resource Conservation and Recovery Act and Toxic Substance Control Act, regulated waste, solid low-level waste, contact handled transuranic, and remote handled transuranic waste. This paper discusses characterization and operational experiences associated with the disposal of the spent filters across multiple applications.« less

Tailored material properties using textile composites

NASA Astrophysics Data System (ADS)

Pastore, C. M.

2017-10-01

Lightweighting is essential for the reduction of energy consumption in transportation. The most common approach is through the application of high specific strength and stiffness materials, such as composites and high performance aluminum alloys. One of the challenges associated with the use of advanced materials is the high cost. This paper explores the opportunities of using hybrid composites (glass and carbon, for example) with selective fiber placement to optimize the weight subject to price constraints for given components. Considering the example of a hat-section for hood reinforcement, different material configurations were modeled and developed. The required thickness of the hat section to meet the same bending stiffness as an all carbon composite beam was calculated. It was shown that selective placement of fiber around the highest moments results in a weight savings of around 14% compared to a uniformly blended hybrid with the same total material configuration. From this it is possible to estimate the materials cost of the configurations as well as the weight of the component. To determine which is best it is necessary to find an exchange constant that converts weight into cost - the penalty of carrying the extra weight. The value of this exchange constant will depend on the particular application.

Classification of Hypertrophy of Labia Minora: Consideration of a Multiple Component Approach.

PubMed

González, Pablo I

2015-11-01

Labia minora hypertrophy of unknown and under-reported incidence in the general population is considered a variant of normal anatomy. Its origin is multi-factorial including genetic, hormonal, and infectious factors, and voluntary elongation of the labiae minorae in some cultures. Consults with patients bothered by this condition have been increasing with patients complaining of poor aesthetics and symptoms such as difficulty with vaginal secretions, vulvovaginitis, chronic irritation, and superficial dyspareunia, all of which can have a negative effect on these patients' sexuality and self esteem. Surgical management of labial hypertrophy is an option for women with these physical complaints or aesthetic issues. Labia minora hypertrophy can consist of multiple components, including the clitoral hood, lateral prepuce, frenulum, and the body of the labia minora. To date, there is not a consensus in the literature with respect to the classification and definition of varying grades of hypertrophy, aside from measurement of the length in centimeters. In order to offer patients the most appropriate surgical technique, an objective and understandable classification that can be used as part of the preoperative evaluation is necessary. Such a classification should have the aim of offering patients the best cosmetic and functional results with the fewest complications.

Equipment & New Products.

ERIC Educational Resources Information Center

Poitras, Adrian W., Ed.

1979-01-01

Reviews new science equipment and products for the laboratory. Includes hand-held calculators, fiberglass fume hoods, motorized microtomy, disposable mouse cages, and electric timers. Describes 11 products total. Provides manufacturer name, address, and price. (MA)

Global change effects on the long-term feeding ecology and contaminant exposures of East Greenland polar bears.

PubMed

McKinney, Melissa A; Iverson, Sara J; Fisk, Aaron T; Sonne, Christian; Rigét, Frank F; Letcher, Robert J; Arts, Michael T; Born, Erik W; Rosing-Asvid, Aqqalu; Dietz, Rune

2013-08-01

Rapid climate changes are occurring in the Arctic, with substantial repercussions for arctic ecosystems. It is challenging to assess ecosystem changes in remote polar environments, but one successful approach has entailed monitoring the diets of upper trophic level consumers. Quantitative fatty acid signature analysis (QFASA) and fatty acid carbon isotope (δ(13) C-FA) patterns were used to assess diets of East Greenland (EG) polar bears (Ursus maritimus) (n = 310) over the past three decades. QFASA-generated diet estimates indicated that, on average, EG bears mainly consumed arctic ringed seals (47.5 ± 2.1%), migratory subarctic harp (30.6 ± 1.5%) and hooded (16.7 ± 1.3%) seals and rarely, if ever, consumed bearded seals, narwhals or walruses. Ringed seal consumption declined by 14%/decade over 28 years (90.1 ± 2.5% in 1984 to 33.9 ± 11.1% in 2011). Hooded seal consumption increased by 9.5%/decade (0.0 ± 0.0% in 1984 to 25.9 ± 9.1% in 2011). This increase may include harp seal, since hooded and harp seal FA signatures were not as well differentiated relative to other prey species. Declining δ(13) C-FA ratios supported shifts from more nearshore/benthic/ice-associated prey to more offshore/pelagic/open-water-associated prey, consistent with diet estimates. Increased hooded seal and decreased ringed seal consumption occurred during years when the North Atlantic Oscillation (NAO) was lower. Thus, periods with warmer temperatures and less sea ice were associated with more subarctic and less arctic seal species consumption. These changes in the relative abundance, accessibility, or distribution of arctic and subarctic marine mammals may have health consequences for EG polar bears. For example, the diet change resulted in consistently slower temporal declines in adipose levels of legacy persistent organic pollutants, as the subarctic seals have higher contaminant burdens than arctic seals. Overall, considerable changes are occurring in the EG marine ecosystem, with consequences for contaminant dynamics. © 2013 John Wiley & Sons Ltd.

A large multicenter outcome study of female genital plastic surgery.

PubMed

Goodman, Michael P; Placik, Otto J; Benson, Royal H; Miklos, John R; Moore, Robert D; Jason, Robert A; Matlock, David L; Simopoulos, Alex F; Stern, Bernard H; Stanton, Ryan A; Kolb, Susan E; Gonzalez, Federico

2010-04-01

Female Genital Plastic Surgery, a relatively new entry in the field of Cosmetic and Plastic Surgery, has promised sexual enhancement and functional and cosmetic improvement for women. Are the vulvovaginal aesthetic procedures of Labiaplasty, Vaginoplasty/Perineoplasty ("Vaginal Rejuvenation") and Clitoral Hood Reduction effective, and do they deliver on that promise? For what reason do women seek these procedures? What complications are evident, and what effects are noted regarding sexual function for women and their partners? Who should be performing these procedures, what training should they have, and what are the ethical considerations? This study was designed to produce objective, utilizable outcome data regarding FGPS. 1) Reasons for considering surgery from both patient's and physician's perspective; 2) Pre-operative sexual functioning per procedure; 3) Overall patient satisfaction per procedure; 4) Effect of procedure on patient's sexual enjoyment, per procedure; 5) Patient's perception of effect on her partner's sexual enjoyment, per procedure; 6) Complications. This cross-sectional study, including 258 women and encompassing 341 separate procedures, comes from a group of twelve gynecologists, gynecologic urologists and plastic surgeons from ten centers in eight states nationwide. 104 labiaplasties, 24 clitoral hood reductions, 49 combined labiaplasty/clitoral hood reductions, 47 vaginoplasties and/or perineoplasties, and 34 combined labiaplasty and/or reduction of the clitoral hood plus vaginoplasty/perineoplasty procedures were studied retrospectively, analyzing both patient's and physician's perception of surgical rationale, pre-operative sexual function and several outcome criteria. Combining the three groups, 91.6% of patients were satisfied with the results of their surgery after a 6-42 month follow-up. Significant subjective enhancement in sexual functioning for both women and their sexual partners was noted (p = 0.0078), especially in patients undergoing vaginal tightening/perineal support procedures. Complications were acceptable and not of major consequence. While emphasizing that these female genital plastic procedures are not performed to correct "abnormalities," as there is a wide range of normality in the external and internal female genitalia, both parous and nulliparous, many women chose to modify their vulvas and vaginas. From the results of this large study pooling data from a diverse group of experienced genital plastic surgeons, outcome in both general and sexual satisfaction appear excellent.

A model to relate wind tunnel measurements to open field odorant emissions from liquid area sources

NASA Astrophysics Data System (ADS)

Lucernoni, F.; Capelli, L.; Busini, V.; Sironi, S.

2017-05-01

Waste Water Treatment Plants are known to have significant emissions of several pollutants and odorants causing nuisance to the near-living population. One of the purposes of the present work is to study a suitable model to evaluate odour emissions from liquid passive area sources. First, the models describing volatilization under a forced convection regime inside a wind tunnel device, which is the sampling device that typically used for sampling on liquid area sources, were investigated. In order to relate the fluid dynamic conditions inside the hood to the open field and inside the hood a thorough study of the models capable of describing the volatilization phenomena of the odorous compounds from liquid pools was performed and several different models were evaluated for the open field emission. By means of experimental tests involving pure liquid acetone and pure liquid butanone, it was verified that the model more suitable to describe precisely the volatilization inside the sampling hood is the model for the emission from a single flat plate in forced convection and laminar regime, with a fluid dynamic boundary layer fully developed and a mass transfer boundary layer not fully developed. The proportionality coefficient for the model was re-evaluated in order to account for the specific characteristics of the adopted wind tunnel device, and then the model was related with the selected model for the open field thereby computing the wind speed at 10 m that would cause the same emission that is estimated from the wind tunnel measurement furthermore, the field of application of the proposed model was clearly defined for the considered models during the project, discussing the two different kinds of compounds commonly found in emissive liquid pools or liquid spills, i.e. gas phase controlled and liquid phase controlled compounds. Lastly, a discussion is presented comparing the presented approach for emission rates recalculation in the field, with other approaches possible, i.e. the ones relying on the recalculation of the wind speed at the emission level, instead of the wind speed that would cause in the open field the same emission that is measured with the hood.

10 CFR 433.5 - Performance level determination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... loads). (b) Each Federal agency shall consider laboratory fume hoods and kitchen ventilation systems as part of the ASHRAE-covered HVAC loads subject to the 30 percent savings requirements, rather than as...

Hard metal exposures. Part 1: Observed performance of three local exhaust ventilation systems.

PubMed

Guffey, S E; Simcox, N; Booth, D W; Hibbard, R; Stebbins, A

2000-04-01

Not every ventilation system performs as intended; much can be learned when they do not. The purpose of this study was to compare observed initial performance to expected levels for three saw-reconditioning shop ventilation systems and to characterize the changes in performance of the systems over a one-year period. These three local exhaust ventilation systems were intended to control worker exposures to cobalt, cadmium, and chromium during wet grinding, dry grinding, and welding/brazing activities. Prior to installation the authors provided some design guidance based on Industrial Ventilation, a Manual of Recommended Practice. However, the authors had limited influence on the actual installation and operation and no line authority for the systems. In apparent efforts to cut costs and to respond to other perceived needs, the installed systems deviated from the specifications used in pressure calculations in many important aspects, including adding branch ducts, use of flexible ducts, the choice of fans, and the construction of some hoods. After installation of the three systems, ventilation measurements were taken to determine if the systems met design specifications, and worker exposures were measured to determine effectiveness. The results of the latter will be published as a companion article. The deviations from design and maintenance failures may have adversely affected performance. From the beginning to the end of the study period the distribution of air flow never matched the design specifications for the systems. The observed air flows measured within the first month of installation did not match the predicated design air flows for any of the systems, probably because of the differences between the design and the installed system. Over the first year of operation, hood air flow variability was high due to inadequate cleaning of the sticky process materials which rapidly accumulated in the branch ducts. Poor distribution of air flows among branch ducts frequently produced individual hood air flows that were far below specified design levels even when the total air flow through that system was more than adequate. To experienced practitioners, it is not surprising that deviations from design recommendations and poor maintenance would be associated with poor system performance. Although commonplace, such experiences have not been documented in peer-reviewed publications to date. This publication is a first step in providing that documentation.

75 FR 30364 - Mt. Hood and Willamette National Forests, Oregon; Cascade Crossing Transmission Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-01

... Bonneville Power Administration (BPA) transmission lines through National Forest lands. The second alternative would follow the existing BPA transmission lines through the Confederated Tribes of Warm Springs...

75 FR 21220 - Hood/Willamette Resource Advisory Committee (RAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... Management Office; 1717 Fabry Road SE; Salem, Oregon; (503) 375-5646. The tentative agenda includes: (1... encouraged, particularly if the material cannot be presented within the time limits for the Public Forum...

Transit research and industry news update : January-February 2010.

DOT National Transportation Integrated Search

2010-02-01

SPECIAL : Statement of The Honorable Ray LaHood, Secretary of Transportation Before the Committee on Appropriations Subcommittee on Transportation, Housing and Urban Development and Related Agencies, United States House of Representatives ..............

42 CFR 84.172 - Breathing tubes; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Restriction of free head movement; (b) Disturbance of the fit of facepieces, mouthpieces, hoods, or helmets; (c) Interference with the wearer's activities; and (d) Shutoff of airflow due to kinking, or from...

42 CFR 84.172 - Breathing tubes; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Restriction of free head movement; (b) Disturbance of the fit of facepieces, mouthpieces, hoods, or helmets; (c) Interference with the wearer's activities; and (d) Shutoff of airflow due to kinking, or from...

42 CFR 84.172 - Breathing tubes; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Restriction of free head movement; (b) Disturbance of the fit of facepieces, mouthpieces, hoods, or helmets; (c) Interference with the wearer's activities; and (d) Shutoff of airflow due to kinking, or from...

42 CFR 84.172 - Breathing tubes; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Restriction of free head movement; (b) Disturbance of the fit of facepieces, mouthpieces, hoods, or helmets; (c) Interference with the wearer's activities; and (d) Shutoff of airflow due to kinking, or from...

42 CFR 84.172 - Breathing tubes; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Restriction of free head movement; (b) Disturbance of the fit of facepieces, mouthpieces, hoods, or helmets; (c) Interference with the wearer's activities; and (d) Shutoff of airflow due to kinking, or from...

System and method for producing metallic iron

DOEpatents

Bleifuss, Rodney L [Grand Rapids, MN; Englund, David J [Bovey, MN; Iwasaki, Iwao [Grand Rapids, MN; Fosnacht, Donald R [Hermantown, MN; Brandon, Mark M [Charlotte, NC; True, Bradford G [Charlotte, NC

2012-01-17

A hearth furnace 10 for producing metallic iron material has a furnace housing 11 having a drying/preheat zone 12, a conversion zone 13, a fusion zone 14, and optionally a cooling zone 15, the conversion zone 13 is between the drying/preheat zone 12 and the fusion zone 14. A moving hearth 20 is positioned within the furnace housing 11. A hood or separation barrier 30 within at least a portion of the conversion zone 13, fusion zone 14 or both separates the fusion zone 14 into an upper region and a lower region with the lower region adjacent the hearth 20 and the upper region adjacent the lower region and spaced from the hearth 20. An injector introduces a gaseous reductant into the lower region adjacent the hearth 20. A combustion region may be formed above the hood or separation barrier.

Hood of the truck statistics for food animal practitioners.

PubMed

Slenning, Barrett D

2006-03-01

This article offers some tips on working with statistics and develops four relatively simple procedures to deal with most kinds of data with which veterinarians work. The criterion for a procedure to be a "Hood of the Truck Statistics" (HOT Stats) technique is that it must be simple enough to be done with pencil, paper, and a calculator. The goal of HOT Stats is to have the tools available to run quick analyses in only a few minutes so that decisions can be made in a timely fashion. The discipline allows us to move away from the all-too-common guess work about effects and differences we perceive following a change in treatment or management. The techniques allow us to move toward making more defensible, credible, and more quantifiably "risk-aware" real-time recommendations to our clients.

Association in Long-Evans hooded rats of red cell 2,3-diphosphoglycerate levels with hemoglobin types.

PubMed

Brewer, G; Gilman, J; Noble, N; Crews, V

1978-08-01

Two sublines of commercially available Long-Evans hooded rats have been developed by genetic selection. These sublines have widely differing levels of erythrocyte 2,3-diphosphoglycerate (DPG) due to different alleles at a single genetic locus. In the present work, it is shown that rats from the commercial population are also polymorphic at a hemoglobin locus, probably involving two alleles of the IIIbeta-globin chain locus. Particular hemoglobin types have been found to be strongly associated with certain DPG types, not only in the high-DPG and low-DPG lines but also in the commercial population. Two explanations for this association are considered. One is a single-locus hypothesis, with hemoglobin allelic variation causing DPG variation, and the other is a two-locus hypothesis, with marked linkage disequilibrium.

Vertebral formula in red-crowned crane (Grus japonensis) and hooded crane (Grus monacha).

PubMed

Hiraga, Takeo; Sakamoto, Haruka; Nishikawa, Sayaka; Muneuchi, Ippei; Ueda, Hiromi; Inoue, Masako; Shimura, Ryoji; Uebayashi, Akiko; Yasuda, Nobuhiro; Momose, Kunikazu; Masatomi, Hiroyuki; Teraoka, Hiroki

2014-04-01

Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9-11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12-14 and 6-8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity.

Structural and heat-flow implications of infrared anomalies at Mt. Hood, Oregon

USGS Publications Warehouse

Friedman, Jules D.; Frank, David

1977-01-01

Surface thermal features occur in an area of 9700 m2 at Mt. Hood, on the basis of an aerial line-scan survey made April 26, 1973. The distribution of the thermal areas below the summit of Mt. Hood, shown on planimetrically corrected maps at 1:12,000, suggests structural control by a fracture system and brecciated zone peripheral to a hornblende-dacite plug dome (Crater Rock), and by a concentric fracture system that may have been associated with development of the present crater. The extent and inferred temperature of the thermal areas permits a preliminary estimate of a heat discharge of 10 megawatts, by analogy with similar fumarole and thermal fields of Mt. Baker, Washington. This figure includes a heat loss of 4 megawatts (MW) via conduction, diffusion, evaporation, and radiation to the atmosphere, and a somewhat less certain loss of 6MW via fumarolic mass transfer of vapor and advective heat loss from runoff and ice melt. The first part of the estimate is based on two-point models for differential radiant exitance and differential flux via conduction, diffusion, evaporation, and radiation from heat balance of the ground surface. Alternate methods for estimating volcanogenic geothermal flux that assume a quasi-steady state heat flow also yield estimates in the 5-11 MW range. Heat loss equivalent to cooling of the dacite plug dome is judged to be insufficient to account for the heat flux at the fumarole fields.

Nanometric study of nickel oxide prepared by sol gel process

NASA Astrophysics Data System (ADS)

Dessai, R. Raut; Desa, J. A. E.; Sen, D.; Babu, P. D.

2018-04-01

Nickel oxide nanopowder was synthesized by sol gel method using nickel nitrate as the starting material. Nickel oxide nanoparticles with a grain size of 15-90 nm have been studied by; small angle neutron scattering; scanning electron microscopy; and vibrating sample magnetometry. A combination of Ferro and paramagnetic behaviour of the particles after calcination at 800 °C is observed while for powder calcined at 400 °C, soft magnetic character with saturation is seen. The system of nanoparticles ofNiO embedded in a silica matrix is also studied for the structural change. Weak magnetic ordering is observed in this case with the likely-hood of particles being evenly distributed in the silica.

Good manufacturing practice-compliant expansion of marrow-derived stem and progenitor cells for cell therapy.

PubMed

Gastens, Martin H; Goltry, Kristin; Prohaska, Wolfgang; Tschöpe, Diethelm; Stratmann, Bernd; Lammers, Dirk; Kirana, Stanley; Götting, Christian; Kleesiek, Knut

2007-01-01

Ex vivo expansion is being used to increase the number of stem and progenitor cells for autologous cell therapy. Initiation of pivotal clinical trials testing the efficacy of these cells for tissue repair has been hampered by the challenge of assuring safe and high-quality cell production. A strategy is described here for clinical-scale expansion of bone marrow (BM)-derived stem cells within a mixed cell population in a completely closed process from cell collection through postculture processing using sterile connectable devices. Human BM mononuclear cells (BMMNC) were isolated, cultured for 12 days, and washed postharvest using either standard open procedures in laminar flow hoods or using automated closed systems. Conditions for these studies were similar to long-term BM cultures in which hematopoietic and stromal components are cultured together. Expansion of marrow-derived stem and progenitor cells was then assessed. Cell yield, number of colony forming units (CFU), phenotype, stability, and multilineage differentiation capacity were compared from the single pass perfusion bioreactor and standard flask cultures. Purification of BMMNC using a closed Ficoll gradient process led to depletion of 98% erythrocytes and 87% granulocytes, compared to 100% and 70%, respectively, for manual processing. After closed system culture, mesenchymal progenitors, measured as CD105+CD166+CD14-CD45- and fibroblastic CFU, expanded 317- and 364-fold, respectively, while CD34+ hematopoietic progenitors were depleted 10-fold compared to starting BMMNC. Cultured cells exhibited multilineage differentiation by displaying adipogenic, osteogenic, and endothelial characteristics in vitro. No significant difference was observed between manual and bioreactor cultures. Automated culture and washing of the cell product resulted in 181 x 10(6) total cells that were viable and contained fibroblastic CFU for at least 24 h of storage. A combination of closed, automated technologies enabled production of good manufacturing practice (GMP)-compliant cell therapeutics, ready for use within a clinical setting, with minimal risk of microbial contamination.

75 FR 16894 - Establishment of the Future of Aviation Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... March 24, 2010, the Secretary of Transportation authorized the establishment of a Federal Advisory...-0074. Issued the 26th day of March, 2010, in Washington, DC. Ray LaHood, Secretary of Transportation...

19. CUSHMAN DAM SPILLWAY FLASHBOARD SOCKETS. March 1927 Reference ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. CUSHMAN DAM SPILLWAY - FLASHBOARD SOCKETS. March 1927 Reference No. BA-056 - Cushman No. 1 Hydroelectric Power Plant, Spillway, North Fork of Skokomish River, 5 miles West of Hood Canal, Hoodsport, Mason County, WA

75 FR 18144 - Hood/Willamette Resource Advisory Committee (RAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... Office of the Bureau of Land Management Office; 1717 Fabry Road SE; Salem, Oregon; (503) 375-5646. The... are encouraged, particularly if the material cannot be presented within the time limits for the Public...

1. General oblique view of north and east sides, view ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. General oblique view of north and east sides, view to southwest, showing main loading docks - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

A protective passenger smoke hood.

DOT National Transportation Integrated Search

1967-04-01

Several recent jet transport accidents have focused the attention of the aviation industry upon smoke and toxic gases as causal factors of passenger incapacitation and failure to evacuate aircraft before fire and heat render the environment uninhabit...

21. Detail of typical refrigeration unit in the southwest corner ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Detail of typical refrigeration unit in the southwest corner of the fruit and vegetable storage room - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

24 CFR 3280.204 - Kitchen cabinet protection.

Code of Federal Regulations, 2011 CFR

2011-04-01

... framing members and trim are exempted from this requirement. The cabinet area over the cooking range or cooktops shall be protected by a metal hood (26-gauge sheet metal, or .017 stainless steel, or .024...

2. General oblique view of north loading dock showing loading ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. General oblique view of north loading dock showing loading docks with doors opening into refrigerated rooms - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

How To Curb the Appetite for Energy in University Laboratories.

ERIC Educational Resources Information Center

Zsirai, Ted; Wright, Michaella

2001-01-01

Discusses ways to cut rising energy costs within university laboratories by using heat recovery systems and variable volume exhaust hood systems. Explores the implementation of broad-based, sustainable laboratory classroom design concepts. (GR)

77 FR 28767 - Drawbridge Operation Regulation; Hood Canal, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... drawbridge near Port Gamble. This modification will relieve heavy rush hour road traffic on State Routes 3... hours during summer months. This action will help alleviate heavy rush hour road traffic by reducing...

77 FR 60960 - Safety Zone, Coast Guard Exercise Area, Hood Canal, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-05

... to ensure the safety of the maritime public during these exercises, which involve fast moving surface... to Foul Weather Bluff. These exercises include fast moving surface vessels, smoke machines, and...

Corrosion Damage and Wear Mechanisms in Long-Term Retrieved CoCr Femoral Components for Total Knee Arthroplasty.

PubMed

Arnholt, Christina M; MacDonald, Daniel W; Malkani, Arthur L; Klein, Gregg R; Rimnac, Clare M; Kurtz, Steven M; Kocagoz, Sevi B; Gilbert, Jeremy L

2016-12-01

Metal debris and ion release has raised concerns in joint arthroplasty. The purpose of this study was to characterize the sources of metallic ions and particulate debris released from long-term (in vivo >15 years) total knee arthroplasty femoral components. A total of 52 CoCr femoral condyles were identified as having been implanted for more than 15 years. The femoral components were examined for incidence of 5 types of damage (metal-on-metal wear due to historical polyethylene insert failure, mechanically assisted crevice corrosion at taper interfaces, cement interface corrosion, third-body abrasive wear, and inflammatory cell-induced corrosion [ICIC]). Third-body abrasive wear was evaluated using the Hood method for polyethylene components and a similar method quantifying surface damage of the femoral condyle was used. The total area damaged by ICIC was quantified using digital photogrammetry. Surface damage associated with corrosion and/or CoCr debris release was identified in 51 (98%) CoCr femoral components. Five types of damage were identified: 98% of femoral components exhibited third-body abrasive wear (mostly observed as scratching, n = 51/52), 29% of femoral components exhibited ICIC damage (n = 15/52), 41% exhibited cement interface damage (n = 11/27), 17% exhibited metal-on-metal wear after wear-through of the polyethylene insert (n = 9/52), and 50% of the modular femoral components exhibited mechanically assisted crevice corrosion taper damage (n = 2/4). The total ICIC-damaged area was an average of 0.11 ± 0.12 mm 2 (range: 0.01-0.46 mm 2 ). Although implant damage in total knee arthroplasty is typically reported with regard to the polyethylene insert, the results of this study demonstrate that abrasive and corrosive damage occurs on the CoCr femoral condyle in vivo. Copyright © 2016 Elsevier Inc. All rights reserved.

Geochemical and geophysical examination of submarine groundwater discharge and associated nutrient loading estimates into Lynch Cove, Hood Canal, WA

USGS Publications Warehouse

Swarzenski, P.W.; Simonds, F.W.; Paulson, A.J.; Kruse, S.; Reich, C.

2007-01-01

Geochemical tracer data (i.e., 222Rn and four naturally occurring Ra isotopes), electromagnetic (EM) seepage meter results, and high-resolution, stationary electrical resistivity images were used to examine the bi-directional (i.e., submarine groundwater discharge and recharge) exchange of a coastal aquifer with seawater. Our study site for these experiments was Lynch Cove, the terminus of Hood Canal, WA, where fjord-like conditions dramatically limit water column circulation that can lead to recurring summer-time hypoxic events. In such a system a precise nutrient budget may be particularly sensitive to groundwater-derived nutrient loading. Shore-perpendicular time-series subsurface resistivity profiles show clear, decimeter-scale tidal modulation of the coastal aquifer in response to large, regional hydraulic gradients, hydrologically transmissive glacial terrain, and large (4-5 m) tidal amplitudes. A 5-day 222Rn time-series shows a strong inverse covariance between 222Rn activities (0.5−29 dpm L-1) and water level fluctuations, and provides compelling evidence for tidally modulated exchange of groundwater across the sediment/water interface. Mean Rn-derived submarine groundwater discharge (SGD) rates of 85 ± 84 cm d-1 agree closely in the timing and magnitude with EM seepage meter results that showed discharge during low tide and recharge during high tide events. To evaluate the importance of fresh versus saline SGD, Rn-derived SGD rates (as a proxy of total SGD) were compared to excess 226Ra-derived SGD rates (as a proxy for the saline contribution of SGD). The calculated SGD rates, which include a significant (>80%) component of recycled seawater, are used to estimate associated nutrient (NH4+, Si, PO43-, NO3 + NO2, TDN) loads to Lynch Cove. The dissolved inorganic nitrogen (DIN = NH4 + NO2 + NO3) SGD loading estimate of 5.9 × 104 mol d-1 is 1−2 orders of magnitude larger than similar estimates derived from atmospheric deposition and surface water runoff, respectively.

KSC-08pd1502

NASA Image and Video Library

2008-05-30

CAPE CANAVERAL, Fla. -- On Launch Pad 39A at NASA's Kennedy Space Center, the rotating service structure, or RSS, has rolled back on its axis to uncover space shuttle Discovery, lighted against the night sky, in preparation for launch on the STS-124 mission. Support for the outer end of the bridge is provided by two eight-wheel, motor-driven trucks (one is seen at bottom left) that move along circular twin rails installed flush with the pad surface. First motion was at 8:33 p.m. and rollback was complete at 9:07 p.m. The structure provides protected access to the shuttle for changeout and servicing of payloads at the pad. It is supported by a rotating bridge that pivots on a vertical axis on the west side of the pad's flame trench. After the RSS is rolled back, the orbiter is ready for fuel cell activation and external tank cryogenic propellant loading operations. The pad is cleared to the perimeter gate for operations to fill the external tank with about 500,000 gallons of cryogenic propellants used by the shuttle’s main engines. This is done at the pad approximately eight hours before the scheduled launch. Above the orange external tank is the oxygen vent hood, called the "beanie cap," at the end of the gaseous oxygen vent arm extending from the fixed service structure. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below is the orbiter access arm with the White Room at the end, flush against the shuttle. The White Room provides access into the shuttle. The STS-124 mission is the second of three flights launching components to complete the Japan Aerospace Exploration Agency's Kibo laboratory. The shuttle crew will install Kibo's large Japanese Pressurized Module and its remote manipulator system, or RMS. The 14-day flight includes three spacewalks. Launch is scheduled for 5:02 p.m. May 31. Photo credit: NASA/Troy Cryder

1. Exterior oblique view of north and east sides showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Exterior oblique view of north and east sides showing entrance and typical window - Fort Hood, World War II Temporary Buildings, Dispatcher House, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

The optical properties of smoke-protective devices.

DOT National Transportation Integrated Search

1978-10-01

Optical properties of 13 smoke-protective devices were determined. The devices tested comprised 8 goggles and 5 fullface oxygen masks (3 rigid one-piece masks and 2 flexible hoods). Those properties evaluated were: (i) light transmission, (ii) optica...

3. VIEW OF SOUTH SIDE AND EAST SIDE (GABLE END), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW OF SOUTH SIDE AND EAST SIDE (GABLE END), FACING NORTHWEST FROM HOOD AVENUE. - Fort McPherson, World War II Station Hospital, G. U. Treatment Unit Barracks, Nininger Way, Atlanta, Fulton County, GA

46 CFR 28.330 - Galley hood and other fire protection equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Stage of Construction on or After or Which Undergo a Major Conversion Completed on or After September 15... pre-engineered dry or wet chemical fire extinguishing system meeting the applicable sections of NFPA...

1. Overall view from above, Hogan Ring not seen, looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Overall view from above, Hogan Ring not seen, looking northwest. - Hooded Fireplace Pueblito, On a northern point of Superior Mesa about 700 meters west of Largo Canyon Wash, Dulce, Rio Arriba County, NM

76 FR 54829 - The First Semi-Annual Aviation Workforce Management Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... be co-hosted by the Secretary of Transportation Ray LaHood, Secretary of Labor Hilda L. Solis and Secretary of Education Arne Duncan. The Federal Aviation Administrator J. Randolph (Randy) Babbitt will also...

75 FR 16357 - Participation by Disadvantaged Business Enterprises in Airport Concessions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... commenter's view, there is no current justification for the use of race-conscious remedies in DOT programs..., 2010. Ray LaHood, Secretary of Transportation. 0 For reasons discussed in the preamble, the Department...

40 CFR 721.10279 - Multi-walled carbon nanotubes (generic) (P-10-246).

Code of Federal Regulations, 2014 CFR

2014-07-01

... a loose-fitting hood or helmet and high efficiency particulate air (HEPA) filters; or (C) NIOSH... in § 721.80(f), (k) (conductivity additive to resins, rubber, and to battery electrodes), and (q...

Timber resources of northwest Oregon.

Treesearch

Mary A. Mei

1979-01-01

This report presents statistics from a 1976 timber resource inventory of 10 counties in northwest Oregon: Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah, Polk, Tillamook, Washington, and Yamhill. Tables presented are of forest area, timber volume, growth, mortality, and harvest.

23. SPILLWAY NO. 1 LOWER END TOPOGRAPHY AND SECTIONS. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. SPILLWAY NO. 1 - LOWER END TOPOGRAPHY AND SECTIONS. February 1934. Reference BS-150. - Cushman No. 1 Hydroelectric Power Plant, Spillway, North Fork of Skokomish River, 5 miles West of Hood Canal, Hoodsport, Mason County, WA

Fort Hood: Home of the Third Corps

DTIC Science & Technology

1989-01-01

34 Special Effects Design ...................................................... 34 Post...145 Digital Special Effects ...................................................... 148...geographic sphere of responsibility. The use of aerial video is effective in showing the vast size and varying terrain of the p cs an’ graphics depict

Distribution of melanosomes across the retinal pigment epithelium of a hooded rat: implications for light damage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howell, W.L.; Rapp, L.M.; Williams, T.P.

1982-02-01

Distribution of melanosomes across the retinal pigment epithelium of hooded rats (Long-Evans) is studied at the light microscopic and electron microscopic levels. This distribution is shown to be nonuniform: more melanosomes exist in the periphery than elsewhere and, importantly, there are very few melanosomes in a restricted area of the central portion of the superior hemisphere compared with the corresponding part of the inferior hemisphere. The region with fewest melanosomes is precisely the one that is highly susceptible to light damage. Because this region is the same in both pigmented and albino eyes, the paucity of melanin in this regionmore » is not the cause of its great sensitivity to light damage. Nor does light cause the nonuniform distribution of melanin. A possible explanation, involving a proposed vestigial tapetum, is given in order to explain the correlation of melanosome counts and sensitivity to light damage.« less

KSC-02pd0392

NASA Image and Video Library

2002-04-03

KENNEDY SPACE CENTER, FLA. -- With the Rotating Service Structure rolled back, Space Shuttle Atlantis stands ready for launch on mission STS-110. The Orbiter Access Arm extends from the Fixed Service Structure (FSS) to the crew compartment hatch, through which the STS-110 crew will enter Atlantis. Above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the Space Shuttle vehicle. The RSS provides protected access to the orbiter for changeout and servicing of payloads at the pad. The structure has access platforms at five levels to provide access to the payload bay. The FSS provides access to the orbiter and the RSS. Mission STS-110 is scheduled to launch April 4 on its 11-day mission to the International Space Station

Thermal degradation products from PVC film in food-wrapping operations.

PubMed

Boettner, E A; Ball, G L

1980-07-01

Thermal degradation products of polyvinyl chloride (PVC) food-wrap films were studied under simulated supermarket conditons using a commercial wrapping machine with either a hot wire or a cool rod cutting device. A sampling hood was constructed around the wire/rod to confine and allow collection of thermal degradation products produced. Compounds analyzed and normal concentration ranges found included hydrogen chloride (1-10 micrograms per cut), plasticizer (1-50 micrograms per cut), benzene and toluene (each < 5-20 ng per cut), acrolein (25-150 ng per cut), and carbon monoxide (2-4 micrograms per cut) using the hot wire. Room air samples, collected during hot-wire cutting without the sampling hood, had < 0.25 ppm hydrogen chloride. Using the cool-rod cutting device hydrogen chloride, benzene, and toluene were not detected. Plasticizer was detected (25-86 micrograms per cut) using the cool rod.

KSC-02pd0390

NASA Image and Video Library

2002-04-03

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis is revealed as the Rotating Service Structure rolls back into launch position. The RSS provides protected access to the orbiter for changeout and servicing of payloads at the pad. The structure has access platforms at five levels to provide access to the payload bay. The Shuttle rests on the Mobile Launcher Platform (MLP), which straddles the flame trench below. The flame trench is part of the Flame Deflector System that insulates pad structures from the intense heat of the launch. Above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the Space Shuttle vehicle. Mission STS-110 is scheduled to launch April 4 on its 11-day mission to the International Space Station

The Fort Hood Massacre: Lessons learned from a high profile mass casualty.

PubMed

Wild, Jeffrey; Maher, Janae; Frazee, Richard C; Craun, Michael L; Davis, Matthew L; Childs, Ed W; Smith, Randall W

2012-06-01

On November 5, 2009, an army psychiatrist at Fort Hood in Killeen, TX, allegedly opened fire at the largest US military base in the world, killing 13 and wounding 32. Data from debriefing sessions, news media, and area hospitals were reviewed. Ten patients were initially transferred to the regional Level I trauma center. The remainder of the shooting victims were triaged to two other local regional hospitals. National news networks broadcasted the Level I trauma center's referral phone line which resulted in more than 1,300 calls. The resulting difficulties in communication led to the transfer of two victims (one critical) to a regional hospital without a trauma designation. Triage at the scene was compromised by a lack of a secure environment, leading to undertriage of several patients. Overload of routine communication pathways compounded the problem, suggesting redundancy is crucial. Prognostic study, level V. Copyright © 2012 by Lippincott Williams & Wilkins.

Bonneville - Hood River Vegetation Management Environmental Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

1998-08-01

To maintain the reliability of its electrical system, BPA, in cooperation with the U.S. Forest Service, needs to expand the range of vegetation management options used to clear unwanted vegetation on about 20 miles of BPA transmission line right-of-way between Bonneville Dam and Hood River; Oregon, within the Columbia Gorge National Scenic Area (NSA). We propose to continue controlling undesirable vegetation using a program of Integrated Vegetation Management (IVM) which includes manual, biological and chemical treatment methods. BPA has prepared an Environmental Assessment (EA) (DOE/EA-1257) evaluating the proposed project. Based on the analysis in the EA, BPA has determined thatmore » the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and BPA is issuing this FONSI.« less

"Robin Hood" of techno-Turkey or organ trafficking in the state of ethical beings.

PubMed

Sanal, Aslihan

2004-09-01

Dr S. is a famous transplant surgeon in the Middle East. He operates "underground" on wealthy patients in different countries, from Israel to Turkey to Russia. The media refer to him as the "Organ Mafia doctor," and patients diagnosed with renal failure speak of him sardonically as "Robin Hood," acknowledging that he takes organs from the poor to give to the rich. But ethical issues of organ trafficking are not limited to marginal private clinics and "Mafia" doctors. All-living related organ transplants in Turkey involve similar ethical dilemmas: many related or nonrelated organ recipients pay their donors, and demand continues to rise. This paper explores practices in state and university hospitals and the ethical dilemmas doctors encounter to understand where and how judicial, cultural, and social categories of "human rights" and "crime" are constructed in our high-tech world.

KSC-06pd2674

NASA Image and Video Library

2006-12-07

KENNEDY SPACE CENTER, FLA. -- Under a blue sky streaked with clouds, Launch Pad 39B holds Space Shuttle Discovery, ready for launch of mission STS-116. At the far left is the rotating service structure, rolled back after midnight in preparation for launch. Next to Discovery is the fixed service structure, with the 80-foot-high lightning mast on top, part of the lightning protection system on the pad. Beneath Discovery's wings are the tail masts, which provide several umbilical connections to the orbiter, including a liquid-oxygen line through one and a liquid-hydrogen line through another. Seen above the golden external tank is the vent hood (known as the "beanie cap") at the end of the gaseous oxygen vent arm, extending from the FSS. Vapors are created as the liquid oxygen in the external tank boil off. The hood vents the gaseous oxygen vapors away from the space shuttle vehicle. Below it, also extending toward Discovery from the FSS, is the orbiter access arm with the White Room at the end. The crew gains access into the orbiter through the White Room. Discovery is scheduled to launch on mission STS-116 at 9:35 p.m. today. On the mission, the crew will deliver truss segment, P5, to the International Space Station and begin the intricate process of reconfiguring and redistributing the power generated by two pairs of U.S. solar arrays. The P5 will be mated to the P4 truss that was delivered and attached during the STS-115 mission in September. Photo credit: NASA/Ken Thornsley

Critical incident stress management (CISM) in support of special agents and other first responders responding to the Fort Hood shooting: summary and recommendations.

PubMed

Strand, Russell; Felices, Karina; Williams, Kenneth

2010-01-01

On November 5, 2009, an individual entered the Fort Hood Soldier Readiness Processing (SRP) site and opened fire with a handgun. The result of the shooting was a total of 13 people killed and 31 wounded. A two-person critical incident peer support (CIPS) team from the United States Army Military Police School (USAMPS) provided critical incident stress management (CISM) in the forms of critical incident stress debriefings (CISD) and one-on-one crisis intervention for investigators and their spouses. This article provides a summary and discussion of the results of the interventions that were conducted. Key results for successful CISM were accessibility of CIPS team, the credibility of trained peers and the development of supportive relationships, the reduction of stigma by requiring attendance at interventions, and the commitment of the CIPS team to the principles of CISM (e.g., homogenous groups, utilizing a multicomponent approach, and facilitating the normalization of emotional reactions to the crisis). Recommendations include mandating critical incident peer support cells for Criminal Investigation Division (CID) units, Director of Emergency Services (DES) on military installations, and Military Police units; providing a pool of trained peers in the above-mentioned organizations; providing permanent funding for USAMPS' CIPS Course; and recognition of CIPS/CISMas an essential element of Comprehensive Soldier Fitness and Army Human Capital in promoting Soldier Family, and Civilian well-being and resiliency. This article would benefit leaders, chaplains, mental health professionals, and emergency services personnel in investigative, operational, and U.S. Army Garrison units.

A complicated story of frost and wind: Present-day gully activity within the north polar erg, Mar

NASA Astrophysics Data System (ADS)

Diniega, Serina; Hansen, Candice; Allen, Amanda; Grisby, Nathan; Li, Zheyu Joey

2016-10-01

Analyses of high-resolution observations have shown that the dunes within the martian north polar erg (AKA Olympia Undae) are currently very active on seasonal and yearly timescales, with 20-60% of the dunes within five polar dune fields undergoing the formation of alcove-apron features each Mars year. Previous studies have hypothesized formation mechanisms, based on observations of when new alcove and alcove-apron features form within an individual field through one Mars year. However, results are ill-constrained (and thus different hypotheses have been proposed) as the polar hood and winter night mean very few images are taken during the actual period of activity. In this study, we mitigate this limitation by examining several fields over several Mars years -- thus bringing aggregated results as well as detailed correlation checks against environmental conditions and seasonal processes to bear on the problem. From this, we propose a new process that appears consistent with all observations: (1) small alcoves form along the dune brink in the autumn (under the polar hood) due to instabilities induced by the night-formation and morning-sublimation of frost. As autumn progresses, the seasonal frost layer builds over the altered dune slope. (2) In the early spring, sublimation activity is concentrated and/or enhanced over these alcoves, causing further erosion and the formation of larger alcove-apron features. From the planform dimensions of the newly formed alcoves, we can estimate the volume of sand moved down the dune slope during one period of activity and estimate the aeolian sediment flux by looking at how quickly the alcoves are erased. We find that, over a Mars year, the amount of material moved via alcove-apron activity and via the wind are both comparable to aeolian sand flux estimates over dunes within lower-latitude regions of Mars. Thus it appears that the formation of alcoves-aprons is a significant mechanism for dune advancement and evolution within the north polar erg, and understanding it better will add to our understanding of polar processes, aeolian sediment transport, and dune evolution on Mars.

Overwinter survival of neotropical migratory birds in early successional and mature tropical forests

USGS Publications Warehouse

Conway, C.J.; Powell, G.V.N.; Nichols, J.D.

1995-01-01

Many Neotropical migratory species inhabit both mature and early successional forest on their wintering grounds, yet comparisons of survival rates between habitats are lacking. Consequently, the factors affecting habitat suitability for Neotropical migrants and the potential effects of tropical deforestation on migrants are not well understood. We estimated over-winter survival and capture probabilities of Wood Thrush (Hylocichla mustelina), Ovenbird (Seiurus aurocapillus), Hooded Warbler (Wilsonia citrina), and Kentucky Warbler (Oporomis formosus) inhabiting two common tropical habitat types, mature and early-successional forest. Our results suggest that large differences (for example, ratio of survival rates (gamma) < 0.85) in overwinter survival between these habitats do not exist for any of these species. Age ratios did not differ between habitats, but males were more common in forest habitats and females more common in successional habitats for Hooded Warblers and Kentucky Warblers. Future research on overwinter survival should address the need for age- and sex-specific survival estimates before we can draw strong conclusions regarding winter habitat suitability. Our estimates of over-winter survival extrapolated to annual survival rates that were generally lower than previous estimates of annual survival of migratory birds. Capture probability differed between habitats for Kentucky Warblers, but our results provide strong evidence against large differences in capture probability between habitats for Wood Thrush, Hooded Warblers, and Ovenbirds. We found no temporal or among site differences in survival or capture probability for any of the four species. Additional research is needed to examine the effects of winter habitat use on survival during migration and between-winter survival.

Vertebral Formula in Red-Crowned Crane (Grus japonensis) and Hooded Crane (Grus monacha)

PubMed Central

HIRAGA, Takeo; SAKAMOTO, Haruka; NISHIKAWA, Sayaka; MUNEUCHI, Ippei; UEDA, Hiromi; INOUE, Masako; SHIMURA, Ryoji; UEBAYASHI, Akiko; YASUDA, Nobuhiro; MOMOSE, Kunikazu; MASATOMI, Hiroyuki; TERAOKA, Hiroki

2013-01-01

ABSTRACT Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9–11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12–14 and 6–8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity. PMID:24334828

Local exhaust ventilation for the control of welding fumes in the construction industry--a literature review.

PubMed

Flynn, Michael R; Susi, Pam

2012-08-01

Arc welding is a common unit operation in the construction industry, where frequent changes in location and welding position make it more difficult to control fume exposures than in industries where fixed locations are the norm. Welders may be exposed to a variety of toxic airborne contaminants including manganese (Mn) and hexavalent chromium (CrVI). Local exhaust ventilation (LEV) is a well-known engineering control for welding fumes but has not been adopted widely in the construction industry. This literature review presents data on the performance of a variety of LEV systems for welding fume control from the construction (five references), shipyard (five references), and other industries. The studies indicate that LEV can reduce fume exposures to total particulate, Mn, and CrVI to levels below currently relevant standards. Field studies suggest that 40-50% or more reduction in exposure is possible with portable or fixed LEV systems relative to natural ventilation but that correct positioning of the hood and adequate exhaust flow rates are essential. Successful implementation of extraction guns for gas metal arc welding (GMAW) and flux core arc welding has been demonstrated, indicating that a successful balance between extraction airflow and shielding gas requirements is possible. Work practices are an important part of achieving successful control of fume exposures; in particular, positioning the hood close to the arc, checking exhaust flow rates, and avoiding the plume. Further research is needed on hood size effects for controlling welding fume with portable LEV systems and identifying and overcoming barriers to LEV use in construction.

Ovule Morphogenesis in Ranunculaceae and its Systematic Significance

PubMed Central

Wang, Zi-Fen; Ren, Yi

2008-01-01

Background and Aims Ranunculaceae has a prominent phylogenetic position in Ranunculales which appears at the base of eudicots. The aims of the present paper are to reveal the features of ovule morphogenesis in different taxa and gain a better understanding of the systematics of Ranunculaceae. Methods Flowers of 17 species from three subfamilies, nine tribes and 16 genera of Ranunculaceae, at successive developmental stages, were collected in the wild and studied with a scanning electron microscope. Key Results The integuments in the unitegmic ovules in Helleborus, Ranunculus and Oxygraphis, as well as the inner integuments in the bitegmic genera, initiate annularly and eventually become cup-shaped. However, the integuments in the unitegmic ovules in Anemone and Clematis, as well as the outer integuments in the bitegmic genera, arise semi-annularly and eventually become hood-shaped. Different kinds of appendages appear on the ovules during development. In Coptis of subfamily Coptidoideae, a wrap-shaped appendage arises outside the ovule and envelopes the ovule entirely. In the genera of subfamily Thalictroideae and tribe Anemoneae of subfamily Ranunculoideae, appendages appear on the placenta, the funicle or both. In tribe Helleboreae of subfamily Ranunculoideae, an alary appendage is initiated where the integument and the funicle join and becomes hood-shaped. Conclusions Ovule morphogenesis characteristics are significant in classification at the levels of subfamilies and tribes. The initiation patterns of the integuments and the development of appendages show diversity in Ranunculaceae. The present observations suggest that the bitegmic, hood-shaped outer integument and endostomic micropyle are primitive while the unitegmic, cupular-shaped outer integument and bistomic micropyle are derivative. PMID:18065776

35. OFFICE OF THE QUARTERMASTER GENERAL; CONSTRUCTION DIVISION; PLAN NUMBER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. OFFICE OF THE QUARTERMASTER GENERAL; CONSTRUCTION DIVISION; PLAN NUMBER 800-196. MOBILIZATION BUILDINGS; STANDARD HEATING DETAILS; WARM AIR HEATING; SMOKE PIPES & VENT HOODS FOR RANGES. - Fort McCoy, Building T-1129, Sparta, Monroe County, WI

Looking Southwest at First Floor View of Oxide Building Interior ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking Southwest at First Floor View of Oxide Building Interior Including Steam Lines, Weigh and Sample Hood, and Superheater - Hematite Fuel Fabrication Facility, Oxide Building & Oxide Loading Dock, 3300 State Road P, Festus, Jefferson County, MO

4. VIEW OF EAST (GABLE END) SIDE AND NORTH SIDE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW OF EAST (GABLE END) SIDE AND NORTH SIDE FROM NORTHEAST. (BUILDING 117 IS VISIBLE ON LEFT.) - Fort McPherson, World War II Station Hospital, G. U. Treatment Unit Lavatory, Hood Avenue, Atlanta, Fulton County, GA

Natural Propagation and Habitat Improvement, Volume 1, Oregon, 1986 Final and Annual Reports.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stuart, Amy

1987-01-01

This report describes activities implemented for fisheries habitat improvement work on priority drainages in the Clackamas and Hood River sub-basins. Separate abstracts have been prepared for the reports on individual projects. (ACR)

DOPAMINE DEPLETION SLOWS RETINAL TRANSMISSION

EPA Science Inventory

In male hooded rats, depletion of norepinephrine and dopamine by a-methyl-paratyrosine (AMT) significantly increased the latencies of early peaks in flash-evoked potentials recorded from the visual cortex, lateral geniculate nucleus, and optic tract. These effects were not produc...

4. INTERIOR VIEW OF CHEMISTRY LAB LOOKING SOUTHEAST; NOTE FUME ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. INTERIOR VIEW OF CHEMISTRY LAB LOOKING SOUTHEAST; NOTE FUME EXHAUST HOOD AT LEFT & ORIGINAL CEILING FIXTURE - Fort McCoy, Building No. T-1033, North side of South Tenth Avenue, Block 10, Sparta, Monroe County, WI

Bumpers: Traffic Safety Tips

DOT National Transportation Integrated Search

1996-01-01

This fact sheet, NHTSA Facts: Summer 1996, discusses automobile bumpers. It notes that a car bumper is not a safety device to prevent or reduce injuries to people in the car. Instead, it is designed to protect the hood, trunk, grille, parking lights,...

75 FR 36772 - Future of Aviation Advisory Committee (FAAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... comment''. In order for the committee to read and consider your views for the July 14 meeting, comments..., 202-267-9677, or [email protected] . Issued on: June 21, 2010. Ray LaHood, Secretary of Transportation. [FR...

2. VIEW OF SOUTH AND EAST WALLS, FACING NORTHWEST. (BUILDINGS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW OF SOUTH AND EAST WALLS, FACING NORTHWEST. (BUILDINGS 122 AND 128 ARE VISIBLE IN THE BACKGROUND.) - Fort McPherson, World War II Station Hospital, G. U. Treatment Unit Lavatory, Hood Avenue, Atlanta, Fulton County, GA

The role of water ice clouds in the Martian hydrologic cycle

NASA Technical Reports Server (NTRS)

James, Philip B.

1990-01-01

A one-dimensional model for the seasonal cycle of water on Mars has been used to investigate the direction of the net annual transport of water on the planet and to study the possible role of water ice clouds, which are included as an independent phase in addition to ground ice and water vapor, in the cycle. The calculated seasonal and spatial patterns of occurrence of water ice clouds are qualitatively similar to the observed polar hoods, suggesting that these polar clouds are, in fact, an important component of water cycle. A residual dry ice in the south acts as a cold trap which, in the absence of sources other than the caps, will ultimately attract the water ice from the north cap; however, in the presence of a source of water in northern midlatitudes during spring, it is possible that the observed distribution of vapor and ice can be in a steady state even if a residual CO2 cap is a permanent feature of the system.

Revamping AK-Ashland gas cleaning system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandes, H.; Koerbel, R.; Haberkamp, K.

1995-07-01

AK Steel`s (formerly Armco) BOF shop was using a static precipitator for the primary collection. The system was designed for full combustion in the gas collecting hoods. No secondary dust collection was in place. A detailed study on alternative solutions led to a completely different system in 1990, and an order was awarded to Mannesmann Demag Corp. (MDC) in Dec. 1990. The new gas collection system is using suppressed combustion with the capability to collect Co at a later stage. The gas cleaning uses the Mannesmann Demag Baumco scrubber with a venturi throat for gas flow control. All auxiliary components,more » water treatment plant, electric substations and sludge handling were designed and supplied by MDC. The secondary dust collection covers the hot metal and scrap charging into the BOF`s, reladling, desulfurization and deslagging by a pulse jet baghouse. All emission limits set by the EPA and guaranteed by MDC have been met by the systems installed.« less

Anatomy of the clitoris and the female sexual response.

PubMed

Pauls, Rachel N

2015-04-01

The clitoris may be the most pivotal structure for female sexual pleasure. While its significance has been reported for hundreds of years, no complete anatomical description was available until recently. Most of the components of the clitoris are buried under the skin and connective tissues of the vulva. It comprises an external glans and hood, and an internal body, root, crura, and bulbs; its overall size is 9-11 cm. Clitoral somatic innervation is via the dorsal nerve of the clitoris, a branch of the pudendal nerve, while other neuronal networks within the structure are complex. The clitoris is the center for orgasmic response and is embryologically homologous to the male penis. While the source of vaginal eroticism might or might not be exclusively clitoral stimulation, it is necessary to understand the intricate anatomy of the organ to assess the data in this regard. Ultimately, sexual enjoyment entails a balance of physical and emotional factors and should be encouraged. © 2015 Wiley Periodicals, Inc.

Oxidative aliphatic C-H fluorination with manganese catalysts and fluoride ion

PubMed Central

Liu, Wei; Huang, Xiongyi; Groves, John T

2014-01-01

Fluorination is a reaction that is useful in improving the chemical stability and changing the binding affinity of biologically active compounds. The protocol described here can be used to replace aliphatic, C(sp3)-H hydrogen in small molecules with fluorine. Notably, isolated methylene groups and unactivated benzylic sites are accessible. The method uses readily available manganese porphyrin and manganese salen catalysts and various fluoride ion reagents, including silver fluoride (AgF), tetrabutylammonium fluoride and triethylamine trihydrofluoride (TREAT·HF), as the source of fluorine. Typically, the reactions afford 50–70% yield of mono-fluorinated products in one step. Two representative examples, the fragrance component celestolide and the nonsteroidal anti-inflammatory drug ibuprofen, are described; they produced useful isolated quantities (250–300 mg, ~50% yield) of fluorinated material over periods of 1–8 h. The procedures are performed in a typical fume hood using ordinary laboratory glassware. No special precautions to rigorously exclude water are required. PMID:24177292

33 CFR 334.1190 - Hood Canal and Dabob Bay, Wash.; naval non-explosive torpedo testing area.

Code of Federal Regulations, 2013 CFR

2013-07-01

... southwesterly to the point of beginning. (2) The regulations. (i) Propeller-driven or other noise-generating craft shall not work their screws or otherwise generate other than incidental noise in the area during...

33 CFR 334.1190 - Hood Canal and Dabob Bay, Wash.; naval non-explosive torpedo testing area.

Code of Federal Regulations, 2012 CFR

2012-07-01

... southwesterly to the point of beginning. (2) The regulations. (i) Propeller-driven or other noise-generating craft shall not work their screws or otherwise generate other than incidental noise in the area during...

33 CFR 334.1190 - Hood Canal and Dabob Bay, Wash.; naval non-explosive torpedo testing area.

Code of Federal Regulations, 2014 CFR

2014-07-01

... southwesterly to the point of beginning. (2) The regulations. (i) Propeller-driven or other noise-generating craft shall not work their screws or otherwise generate other than incidental noise in the area during...

The UAB University Transportation Center update : Vol. 4, No. 1.

DOT National Transportation Integrated Search

2010-01-01

Dr. Russ Fine, Dr. Despina Stavrinos and Ms. Crystal Franklin were invited by US DOT Secretary Ray LaHood to attend the 2010 Distracted Driving Summit held in Washington, DC in September. The Summit brought together leading transportation officials, ...

Aligning Collaborative and Culturally Responsive Evaluation Approaches

ERIC Educational Resources Information Center

Askew, Karyl; Beverly, Monifa Green; Jay, Michelle L.

2012-01-01

The authors, three African-American women trained as collaborative evaluators, offer a comparative analysis of collaborative evaluation (O'Sullivan, 2004) and culturally responsive evaluation approaches (Frierson, Hood, & Hughes, 2002; Kirkhart & Hopson, 2010). Collaborative evaluation techniques immerse evaluators in the cultural milieu…

2. BRICK END ELEVATION WITH X VENTILATORS, REDPAINTED GABLE WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. BRICK END ELEVATION WITH X VENTILATORS, RED-PAINTED GABLE WITH WHITE STARS AND A DOORWAY HOOD. ALSO SHOWS PORTION OF REAR ELEVATION WITH X VENTILATORS - Decorated Red Barn (1852), State Route 100 vicinity, Pottstown, Montgomery County, PA

20. Detail of 8" square solid wood column at fruit ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Detail of 8" square solid wood column at fruit and vegetable storage room; note ledger plates bolted to top of column - Fort Hood, World War II Temporary Buildings, Cold Storage Building, Seventeenth Street, Killeen, Bell County, TX

10. VIEW OF DOG CRIB DAM DURING DISCHARGE FROM EASTERN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW OF DOG CRIB DAM DURING DISCHARGE FROM EASTERN EXTENT OF DAM, FACING WEST. November 1927 - Cushman No. 1 Hydroelectric Power Plant, Spillway, North Fork of Skokomish River, 5 miles West of Hood Canal, Hoodsport, Mason County, WA

40 CFR 81.338 - Oregon.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Urban Growth Boundary Medford Area Jackson County (part) 9/23/02 Attainment Medford Urban Growth... Intrastate Unclassifiable/Attainment Crook County Deschutes County Hood River County Jefferson County Klamath County (part) area outside Urban Growth Boundary Lake County Sherman County Wasco County AQCR 191 Eastern...

9. LOOKING NORTH IN BOP SHOP ON SERVICE FLOOR OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. LOOKING NORTH IN BOP SHOP ON SERVICE FLOOR OF FURNACE AISLE AT FUME HOOD SHOWING COLLAR AND ENTRANCE FOR OXYGEN LANCES. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

38. DETAIL OF COOLING WATER BOOSTER PUMP FOR OXYGEN FURNACES, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. DETAIL OF COOLING WATER BOOSTER PUMP FOR OXYGEN FURNACES, LANCES, AND FUME HOODS IN THE GAS WASHER PUMP HOUSE LOOKING EAST. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

The Family Support Group (FSG) Leaders’ Handbook

DTIC Science & Technology

2000-04-01

family guide. Fort Hood, TX: Author. Granovsky , N. (1998). Family Support Group leader basic handbook (Operation READY). Alexandria, VA: U. S...Readiness and Financial Planning " (22.3 minutes). Granovsky , N. (1998). Family Support Group Leader Basic Handbook (Operation READY). Alexandria

26. SPILLWAY DISCHARGE DATA. CURVE NO. 3 AND NO. 4. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. SPILLWAY DISCHARGE DATA. CURVE NO. 3 AND NO. 4. April 1928 Reference No. 108.2 - Cushman No. 1 Hydroelectric Power Plant, Spillway, North Fork of Skokomish River, 5 miles West of Hood Canal, Hoodsport, Mason County, WA

25. SPILLWAY DISCHARGE DATA. CURVE NO. 1 AND NO. 2. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. SPILLWAY DISCHARGE DATA. CURVE NO. 1 AND NO. 2. April 1928 Reference No. BT-108.1 - Cushman No. 1 Hydroelectric Power Plant, Spillway, North Fork of Skokomish River, 5 miles West of Hood Canal, Hoodsport, Mason County, WA

2. General oblique view of south and east sides showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. General oblique view of south and east sides showing boiler room at right - Fort Hood, World War II Temporary Buildings, Company Maintenance Shop & Arms Room, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

TRIMETHYLTIN EFFECTS ON AUDITORY FUNCTION AND COCHLEAR MORPHOLOGY

EPA Science Inventory

TMT is neurotoxicant known to alter auditory function. he present study was designed to compare TNT-induced auditory dysfunction using behavioral, electrophysiological, and anatomical techniques. dult male long Evans hooded rats (n=9-l2/group) were acutely exposed to saline, 3, 5...

Food Service Equipment and Appurtenances.

ERIC Educational Resources Information Center

National Sanitation Foundation, Ann Arbor, MI.

Equipment design specifications are presented relating to tables of all kinds, counters, sinks and drainboards, bins, shelves, drawers, hoods and similar kitchen appurtenances, not including baking, roasting, toasting, broiling or frying equipment, food preparation machinery such as slicers, choppers, and cutters, mixers and grinders, steam…

Critical Thinking or Cony Cozenage.

ERIC Educational Resources Information Center

Matulich, Loretta

Teachers of history, introductory chemistry, and literature from Portland State University, Portland Community College, Clark College, Mt. Hood Community College, and Clackamas Community College (Oregon) have been working together to foster critical thinking in their students. Teachers in these disciplines have been meeting at their respective…