Electro-deposition painting process improvement of cab truck by Six Sigma concept

NASA Astrophysics Data System (ADS)

Kawitu, Kitiya; Chutima, Parames

2017-06-01

The case study company is a manufacturer of trucks and currently facing a high rework cost due to the thickness of the electro-deposited paint (EDP) of the truck cab is lower than standard. In addition, the process capability is very low. The Six Sigma concept consisting of 5 phases (DMAIC) is applied to determine new parameter settings for each significant controllable factor. After the improvement, EDP thickness of the truck cab increases from 17.88μ to 20μ (i.e. standard = 20 ± 3μ). Moreover, the process capability indexes (Cp and Cpk) are increased from 0.9 to 1.43, and from 0.27 to 1.43, respectively. This improvement could save the rework cost about 1.6M THB per year.

A combined acidification/PEO flocculation process to improve the lignin removal from the pre-hydrolysis liquor of kraft-based dissolving pulp production process.

PubMed

Shi, Haiqiang; Fatehi, Pedram; Xiao, Huining; Ni, Yonghao

2011-04-01

The presence of lignin impairs the utilization of the hemicelluloses dissolved in the pre-hydrolysis liquor (PHL) of the kraft-based dissolving pulp production process. In this paper, a novel process was developed by combining the acidification and poly ethylene oxide (PEO) flocculation concepts to improve the lignin removal. The results showed that the lignin removal was improved by the addition of PEO to the acidified PHL, particularly at a low pH of 1.5. The main mechanisms involved are the lignin/PEO complex formation and the bridging of the formed complexes. This hypothesis was supported by the turbidity, FTIR and particle size measurements. Interestingly, the hemicelluloses removal from the acidification/PEO flocculation was marginal, which would be beneficial for the down-stream ethanol production from the PHL. Additionally, a process flow diagram was proposed that incorporates this new concept into the existing configuration of kraft-based dissolving pulp production process. Copyright © 2011 Elsevier Ltd. All rights reserved.

Students’ Conception on Heat and Temperature toward Science Process Skill

NASA Astrophysics Data System (ADS)

Ratnasari, D.; Sukarmin, S.; Suparmi, S.; Aminah, N. S.

2017-09-01

This research is aimed to analyze the effect of students’ conception toward science process skill. This is a descriptive research with subjects of the research were 10th-grade students in Surakarta from high, medium and low categorized school. The sample selection uses purposive sampling technique based on physics score in national examination four latest years. Data in this research collecting from essay test, two-tier multiple choice test, and interview. Two-tier multiple choice test consists of 30 question that contains an indicator of science process skill. Based on the result of the research and analysis, it shows that students’ conception of heat and temperature affect science process skill of students. The students’ conception that still contains the wrong concept can emerge misconception. For the future research, it is suggested to improve students’ conceptual understanding and students’ science process skill with appropriate learning method and assessment instrument because heat and temperature is one of physics material that closely related with students’ daily life.

Transitions of Care in Medical Education: A Compilation of Effective Teaching Methods.

PubMed

McBryde, Meagan; Vandiver, Jeremy W; Onysko, Mary

2016-04-01

Transitioning patients safely from the inpatient environment back to an outpatient environment is an important component of health care, and multidisciplinary cooperation and formal processes are necessary to accomplish this task. This Transitions of Care (TOC) process is constantly being shaped in health care systems to improve patient safety, outcomes, and satisfaction. While there are many models that have been published on methods to improve the TOC process systematically, there is no clear roadmap for educators to teach TOC concepts to providers in training. This article reviews published data to highlight specific methods shown to effectively instill these concepts and values into medical students and residents. Formal, evidence-based, TOC curriculum should be developed within medical schools and residency programs. TOC education should ideally begin early in the education process, and its importance should be reiterated throughout the curriculum longitudinally. Curriculum should have a specific focus on recognition of common causes of hospital readmissions, such as medication errors, lack of adequate follow-up visits, and social/economic barriers. Use of didactic lectures, case-based workshops, role-playing activities, home visits, interprofessional activities, and resident-led quality improvement projects have all be shown to be effective ways to teach TOC concepts.

The concept of value stream mapping to reduce of work-time waste as applied the smart construction management

NASA Astrophysics Data System (ADS)

Elizar, Suripin, Wibowo, Mochamad Agung

2017-11-01

Delays in construction sites occur due to systematic additions of time waste in various activities that are part of the construction process. Work-time waste is non-adding value activity which used to differentiate between physical construction waste found on site and other waste which occurs during the construction process. The aim of this study is identification using the concept of Value Stream Mapping (VSM) to reduce of work-time waste as applied the smart construction management.VSM analysis is a method of business process improvement. The application of VSM began in the manufacturing community. The research method base on theoretically informed case study and literature review. The data have collected using questionnaire through personal interviews from 383 respondents on construction project in Indonesia. The results show that concept of VSM can identify causes of work-time waste. Base on result of questioners and quantitative approach analysis was obtained 29 variables that influence of work-time waste or non-value-adding activities. Base on three cases of construction project founded that average 14.88% of working time was classified as waste. Finally, the concept of VSM can recommend to identification of systematic for reveal current practices and opportunities for improvement towards global challenges. The concept of value stream mapping can help optimize to reduce work-time waste and improve quality standard of construction management. The concept is also can help manager to make a decision to reduce work-time waste so as to obtain of result in more efficient for performance and sustainable construction project.

[QUIPS: quality improvement in postoperative pain management].

PubMed

Meissner, Winfried

2011-01-01

Despite the availability of high-quality guidelines and advanced pain management techniques acute postoperative pain management is still far from being satisfactory. The QUIPS (Quality Improvement in Postoperative Pain Management) project aims to improve treatment quality by means of standardised data acquisition, analysis of quality and process indicators, and feedback and benchmarking. During a pilot phase funded by the German Ministry of Health (BMG), a total of 12,389 data sets were collected from six participating hospitals. Outcome improved in four of the six hospitals. Process indicators, such as routine pain documentation, were only poorly correlated with outcomes. To date, more than 130 German hospitals use QUIPS as a routine quality management tool. An EC-funded parallel project disseminates the concept internationally. QUIPS demonstrates that patient-reported outcomes in postoperative pain management can be benchmarked in routine clinical practice. Quality improvement initiatives should use outcome instead of structural and process parameters. The concept is transferable to other fields of medicine. Copyright © 2011. Published by Elsevier GmbH.

Improving a Dental School's Clinic Operations Using Lean Process Improvement.

PubMed

Robinson, Fonda G; Cunningham, Larry L; Turner, Sharon P; Lindroth, John; Ray, Deborah; Khan, Talib; Yates, Audrey

2016-10-01

The term "lean production," also known as "Lean," describes a process of operations management pioneered at the Toyota Motor Company that contributed significantly to the success of the company. Although developed by Toyota, the Lean process has been implemented at many other organizations, including those in health care, and should be considered by dental schools in evaluating their clinical operations. Lean combines engineering principles with operations management and improvement tools to optimize business and operating processes. One of the core concepts is relentless elimination of waste (non-value-added components of a process). Another key concept is utilization of individuals closest to the actual work to analyze and improve the process. When the medical center of the University of Kentucky adopted the Lean process for improving clinical operations, members of the College of Dentistry trained in the process applied the techniques to improve inefficient operations at the Walk-In Dental Clinic. The purpose of this project was to reduce patients' average in-the-door-to-out-the-door time from over four hours to three hours within 90 days. Achievement of this goal was realized by streamlining patient flow and strategically relocating key phases of the process. This initiative resulted in patient benefits such as shortening average in-the-door-to-out-the-door time by over an hour, improving satisfaction by 21%, and reducing negative comments by 24%, as well as providing opportunity to implement the electronic health record, improving teamwork, and enhancing educational experiences for students. These benefits were achieved while maintaining high-quality patient care with zero adverse outcomes during and two years following the process improvement project.

Coal-oil coprocessing at HTI - development and improvement of the technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stalzer, R.H.; Lee, L.K.; Hu, J.

1995-12-31

Co-Processing refers to the combined processing of coal and petroleum-derived heavy oil feedstocks. The coal feedstocks used are those typically utilized in direct coal liquefaction: bituminous, subbituminous, and lignites. Petroleum-derived oil, is typically a petroleum residuum, containing at least 70 W% material boiling above 525{degrees}C. The combined coal and oil feedstocks are processed simultaneously with the dual objective of liquefying the coal and upgrading the petroleum-derived residuum to lower boiling (<525{degrees}C) premium products. HTI`s investigation of the Co-Processing technology has included work performed in laboratory, bench and PDU scale operations. The concept of co-processing technology is quite simple and amore » natural outgrowth of the work done with direct coal liquefaction. A 36 month program to evaluate new process concepts in coal-oil coprocessing at the bench-scale was begun in September 1994 and runs until September 1997. Included in this continuous bench-scale program are provisions to examine new improvements in areas such as: interstage product separation, feedstock concentrations (coal/oil), improved supported/dispersed catalysts, optimization of reactor temperature sequencing, and in-line hydrotreating. This does not preclude other ideas from DOE contracts and other sources that can lead to improved product quality and economics. This research work has led to important findings which significantly increased liquid yields, improved product quality, and improved process economics.« less

A continuous quality improvement team approach to adverse drug reaction reporting.

PubMed

Flowers, P; Dzierba, S; Baker, O

1992-07-01

Crossfunctional teams can generate more new ideas, concepts, and possible solutions than does a department-based process alone. Working collaboratively can increase knowledge of teams using CQI approaches and appropriate tools. CQI produces growth and development at multiple levels resulting from involvement in the process of incremental improvement.

Developing an Effective Assessment Process To Support Institutional Effectiveness Efforts.

ERIC Educational Resources Information Center

Albert, Angela R.; Pet-Armacost, Julia

This paper describes a process and an organizational structure in which Institutional Effectiveness (IE) can thrive. When such a system is implemented, continuous quality improvement can be sustained for the long term. Key concepts and philosophies found in the literature regarding continuous quality improvement and assessment in higher education…

Studying Relational Spaces in Secondary School: Applying a Spatial Framework for the Study of Borderlands and Relational Work in School Improvement Processes

ERIC Educational Resources Information Center

Frelin, Anneli; Grannäs, Jan

2014-01-01

This article introduces a theoretical framework for studying school improvement processes such as making school environments safer. Using concepts from spatial theory, in which distinctions between mental, social and physical space are applied makes for a multidimensional analysis of processes of change. In a multilevel case study, these were…

Electrolysis Performance Improvement Concept Study (EPICS) flight experiment phase C/D

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Lee, M. G.

1995-01-01

The overall purpose of the Electrolysis Performance Improvement Concept Study flight experiment is to demonstrate and validate in a microgravity environment the Static Feed Electrolyzer concept as well as investigate the effect of microgravity on water electrolysis performance. The scope of the experiment includes variations in microstructural characteristics of electrodes and current densities in a static feed electrolysis cell configuration. The results of the flight experiment will be used to improve efficiency of the static feed electrolysis process and other electrochemical regenerative life support processes by reducing power and expanding the operational range. Specific technologies that will benefit include water electrolysis for propulsion, energy storage, life support, extravehicular activity, in-space manufacturing and in-space science in addition to other electrochemical regenerative life support technologies such as electrochemical carbon dioxide and oxygen separation, electrochemical oxygen compression and water vapor electrolysis. The Electrolysis Performance Improvement Concept Study flight experiment design incorporates two primary hardware assemblies: the Mechanical/Electrochemical Assembly and the Control/Monitor Instrumentation. The Mechanical/Electrochemical Assembly contains three separate integrated electrolysis cells along with supporting pressure and temperature control components. The Control/Monitor Instrumentation controls the operation of the experiment via the Mechanical/Electrochemical Assembly components and provides for monitoring and control of critical parameters and storage of experimental data.

Improving HIV outcomes in resource-limited countries: the importance of quality indicators.

PubMed

Ahonkhai, Aima A; Bassett, Ingrid V; Ferris, Timothy G; Freedberg, Kenneth A

2012-11-24

Resource-limited countries increasingly depend on quality indicators to improve outcomes within HIV treatment programs, but indicators of program performance suitable for use at the local program level remain underdeveloped. Using the existing literature as a guide, we applied standard quality improvement (QI) concepts to the continuum of HIV care from HIV diagnosis, to enrollment and retention in care, and highlighted critical service delivery process steps to identify opportunities for performance indicator development. We then identified existing indicators to measure program performance, citing examples used by pivotal donor agencies, and assessed their feasibility for use in surveying local program performance. Clinical delivery steps without existing performance measures were identified as opportunities for measure development. Using National Quality Forum (NQF) criteria as a guide, we developed measurement concepts suitable for use at the local program level that address existing gaps in program performance assessment. This analysis of the HIV continuum of care identified seven critical process steps providing numerous opportunities for performance measurement. Analysis of care delivery process steps and the application of NQF criteria identified 24 new measure concepts that are potentially useful for improving operational performance in HIV care at the local level. An evidence-based set of program-level quality indicators is critical for the improvement of HIV care in resource-limited settings. These performance indicators should be utilized as treatment programs continue to grow.

Using rule-based natural language processing to improve disease normalization in biomedical text.

PubMed

Kang, Ning; Singh, Bharat; Afzal, Zubair; van Mulligen, Erik M; Kors, Jan A

2013-01-01

In order for computers to extract useful information from unstructured text, a concept normalization system is needed to link relevant concepts in a text to sources that contain further information about the concept. Popular concept normalization tools in the biomedical field are dictionary-based. In this study we investigate the usefulness of natural language processing (NLP) as an adjunct to dictionary-based concept normalization. We compared the performance of two biomedical concept normalization systems, MetaMap and Peregrine, on the Arizona Disease Corpus, with and without the use of a rule-based NLP module. Performance was assessed for exact and inexact boundary matching of the system annotations with those of the gold standard and for concept identifier matching. Without the NLP module, MetaMap and Peregrine attained F-scores of 61.0% and 63.9%, respectively, for exact boundary matching, and 55.1% and 56.9% for concept identifier matching. With the aid of the NLP module, the F-scores of MetaMap and Peregrine improved to 73.3% and 78.0% for boundary matching, and to 66.2% and 69.8% for concept identifier matching. For inexact boundary matching, performances further increased to 85.5% and 85.4%, and to 73.6% and 73.3% for concept identifier matching. We have shown the added value of NLP for the recognition and normalization of diseases with MetaMap and Peregrine. The NLP module is general and can be applied in combination with any concept normalization system. Whether its use for concept types other than disease is equally advantageous remains to be investigated.

The experience factory: Can it make you a 5? or what is its relationship to other quality and improvement concepts?

NASA Technical Reports Server (NTRS)

Basili, Victor R.

1992-01-01

The concepts of quality improvements have permeated many businesses. It is clear that the nineties will be the quality era for software and there is a growing need to develop or adapt quality improvement approaches to the software business. Thus we must understand software as an artifact and software as a business. Since the business we are dealing with is software, we must understand the nature of software and software development. The software discipline is evolutionary and experimental; it is a laboratory science. Software is development not production. The technologies of the discipline are human based. There is a lack of models that allow us to reason about the process and the product. All software is not the same; process is a variable, goals are variable, etc. Packaged, reusable, experiences require additional resources in the form of organization, processes, people, etc. There have been a variety of organizational frameworks proposed to improve quality for various businesses. The ones discussed in this presentation include: Plan-Do-Check-Act, a quality improvement process based upon a feedback cycle for optimizing a single process model/production line; the Experience Factory/Quality Improvement Paradigm, continuous improvements through the experimentation, packaging, and reuse of experiences based upon a business's needs; Total Quality Management, a management approach to long term success through customer satisfaction based on the participation of all members of an organization; the SEI capability maturity model, a staged process improvement based upon assessment with regard to a set of key process areas until you reach a level 5 which represents a continuous process improvement; and Lean (software) Development, a principle supporting the concentration of the production on 'value added' activities and the elimination of reduction of 'not value added' activities.

An Operations Concept for Integrated Model-Centric Engineering at JPL

NASA Technical Reports Server (NTRS)

Bayer, Todd J.; Cooney, Lauren A.; Delp, Christopher L.; Dutenhoffer, Chelsea A.; Gostelow, Roli D.; Ingham, Michel D.; Jenkins, J. Steven; Smith, Brian S.

2010-01-01

As JPL's missions grow more complex, the need for improved systems engineering processes is becoming clear. Of significant promise in this regard is the move toward a more integrated and model-centric approach to mission conception, design, implementation and operations. The Integrated Model-Centric Engineering (IMCE) Initiative, now underway at JPL, seeks to lay the groundwork for these improvements. This paper will report progress on three fronts: articulating JPL's need for IMCE; characterizing the enterprise into which IMCE capabilities will be deployed; and constructing an operations concept for a flight project development in an integrated model-centric environment.

Improved Traceability of a Small Satellite Mission Concept to Requirements Using Model Based System Engineering

NASA Technical Reports Server (NTRS)

Reil, Robin L.

2014-01-01

Model Based Systems Engineering (MBSE) has recently been gaining significant support as a means to improve the "traditional" document-based systems engineering (DBSE) approach to engineering complex systems. In the spacecraft design domain, there are many perceived and propose benefits of an MBSE approach, but little analysis has been presented to determine the tangible benefits of such an approach (e.g. time and cost saved, increased product quality). This paper presents direct examples of how developing a small satellite system model can improve traceability of the mission concept to its requirements. A comparison of the processes and approaches for MBSE and DBSE is made using the NASA Ames Research Center SporeSat CubeSat mission as a case study. A model of the SporeSat mission is built using the Systems Modeling Language standard and No Magic's MagicDraw modeling tool. The model incorporates mission concept and requirement information from the mission's original DBSE design efforts. Active dependency relationships are modeled to demonstrate the completeness and consistency of the requirements to the mission concept. Anecdotal information and process-duration metrics are presented for both the MBSE and original DBSE design efforts of SporeSat.

Reading, Thinking, and Concept Development: Strategies for the Classroom.

ERIC Educational Resources Information Center

Harris, Theodore L., Ed.; Cooper, Eric J., Ed.

Intended to help teachers both improve students' text comprehension and better understand the teaching-learning process involved, this book focuses on comprehension and concept development as the central core of an effective educational program. The book's five sections deal with teaching explicit comprehension skills, precomprehension and…

Duke University's Quality Appearance Program

ERIC Educational Resources Information Center

Jackson, Joe

2008-01-01

The Grounds Services Unit at Duke University has implemented a new program that involves a process of self evaluation, which embraces the concept of perpetual and continuous improvement. The Quality Appearance Program (QAP) embellishes and expands upon the Quality Assurance Program concept, but with a twist to grounds management improvement…

Detailed performance analysis of the A.A.D. - concept B

NASA Technical Reports Server (NTRS)

Sekar, R.; Tozzi, L.

1983-01-01

New concepts for engine performance improvement are seen through the adoption of heat regeneration techniques; advanced methods to enhance the combustion; and higher efficiency air handling machinery, such as the positive displacement helical screw expander and compressor. Each of these concepts plays a particular role in engine performance improvement. First regeneration has a great potential for achieving higher engine thermal efficiency through the recovery of waste energy. Although the concept itself is not new (this technique is used in the gas turbine), the application to reciprocating internal combustion engines is quite unusual and presents conceptual difficulties. The second important area is better control of the combustion process in terms of heat transfer characteristics, combustion products, and heat release rate. The third area for performance improvement is in the adoption of high efficiency air handling machinery. In particular, positive displacement helical expander and compressor exhibit an extremely high efficiency over a wide range of operating conditions.

Intertextual learning strategy with guided inquiry on solubility equilibrium concept to improve the student’s scientific processing skills

NASA Astrophysics Data System (ADS)

Wardani, K. U.; Mulyani, S.; Wiji

2018-04-01

The aim of this study was to develop intertextual learning strategy with guided inquiry on solubility equilibrium concept to enhance student’s scientific processing skills. This study was conducted with consideration of some various studies which found that lack of student’s process skills in learning chemistry was caused by learning chemistry is just a concept. The method used in this study is a Research and Development to generate the intertextual learning strategy with guided inquiry. The instruments used in the form of sheets validation are used to determine the congruence of learning activities by step guided inquiry learning and scientific processing skills with aspects of learning activities. Validation results obtained that the learning activities conducted in line with aspects of indicators of the scientific processing skills.

Improved signal recovery for flow cytometry based on ‘spatially modulated emission’

NASA Astrophysics Data System (ADS)

Quint, S.; Wittek, J.; Spang, P.; Levanon, N.; Walther, T.; Baßler, M.

2017-09-01

Recently, the technique of ‘spatially modulated emission’ has been introduced (Baßler et al 2008 US Patent 0080181827A1; Kiesel et al 2009 Appl. Phys. Lett. 94 041107; Kiesel et al 2011 Cytometry A 79A 317-24) improving the signal-to-noise ratio (SNR) for detecting bio-particles in the field of flow cytometry. Based on this concept, we developed two advanced signal processing methods which further enhance the SNR and selectivity for cell detection. The improvements are achieved by adapting digital filtering methods from RADAR technology and mainly address inherent offset elimination, increased signal dynamics and moreover reduction of erroneous detections due to processing artifacts. We present a comprehensive theory on SNR gain and provide experimental results of our concepts.

Integrating Strategic Planning Concepts into the Negotiating Process.

ERIC Educational Resources Information Center

Winer, Toby R.; Winer, Russell S.

1987-01-01

The purchase of a new telecommunications system at Vanderbilt University is described. By understanding conditions in which buyers generally obtain leverage over sellers in industries, it was possible to improve negotiating power. Strategic-planning concepts developed by Michael Porter in his book "Competitive Strategy" were used as a…

Development of Problem-Based Learning Oriented Teaching Learning Materials to Facilitate Students’ Mastery of Concept and Critical Thinking Skill

NASA Astrophysics Data System (ADS)

Reza, M.; Ibrahim, M.; Rahayu, Y. S.

2018-01-01

This research aims to develop problem-based learning oriented teaching materials to improve students’ mastery of concept and critical thinking skill. Its procedure was divided into two phases; developmental phase and experimental phase. This developmental research used Four-D Model. However, within this research, the process of development would not involve the last stages, which is disseminate. The teaching learning materials which were developed consist of lesson plan, student handbook, student worksheet, achievement test and critical thinking skill test. The experimental phase employs a research design called one group pretest-posttest design. Results show that the validity of the teaching materials which were developed was good and revealed the enhancement of students’ activities with positive response to the teaching learning process. Furthermore, the learning materials improve the students’ mastery of concept and critical thinking skill.

Innovation for maintenance technology improvements

NASA Technical Reports Server (NTRS)

Shives, T. R. (Editor); Willard, W. A. (Editor)

1982-01-01

A group of 34 submitted entries (32 papers and 2 abstracts) from the 33rd meeting of the Mechanical Failures Prevention Group whose subject was maintenance technology improvement through innovation. Areas of special emphasis included maintenance concepts, maintenance analysis systems, improved maintenance processes, innovative maintenance diagnostics and maintenance indicators, and technology improvements for power plant applications.

Visit, revamp, and revitalize your business plan: Part 2.

PubMed

Waldron, David

2011-01-01

The diagnostic imaging department strives for the highest quality outcomes in imaging quality, in diagnostic reporting, and in providing a caring patient experience while also satisfying the needs of referring physicians. Understand how tools such as process mapping and concepts such as Six Sigma and Lean Six Sigma can be used to facilitate quality improvements and team building, resulting in staff led process improvement initiatives. Discover how to integrate a continuous staff management cycle to implement process improvements,capture the promised performance improvements, and achieve a culture change away from the "way it has always been done".

Field Artillery Ammunition Processing System (FAAPS) concept evaluation study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kring, C.T.; Babcock, S.M.; Watkin, D.C.

1992-06-01

The Field Artillery Ammunition Processing System (FAAPS) is an initiative to introduce a palletized load system (PLS) that is transportable with an automated ammunition processing and storage system for use on the battlefield. System proponents have targeted a 20% increase in the ammunition processing rate over the current operation while simultaneously reducing the total number of assigned field artillery battalion personnel by 30. The overall objective of the FAAPS Project is the development and demonstration of an improved process to accomplish these goals. The initial phase of the FAAPS Project and the subject of this study is the FAAPS conceptmore » evaluation. The concept evaluation consists of (1) identifying assumptions and requirements, (2) documenting the process flow, (3) identifying and evaluating technologies available to accomplish the necessary ammunition processing and storage operations, and (4) presenting alternative concepts with associated costs, processing rates, and manpower requirements for accomplishing the operation. This study provides insight into the achievability of the desired objectives.« less

Field Artillery Ammunition Processing System (FAAPS) concept evaluation study. Ammunition Logistics Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kring, C.T.; Babcock, S.M.; Watkin, D.C.

1992-06-01

The Field Artillery Ammunition Processing System (FAAPS) is an initiative to introduce a palletized load system (PLS) that is transportable with an automated ammunition processing and storage system for use on the battlefield. System proponents have targeted a 20% increase in the ammunition processing rate over the current operation while simultaneously reducing the total number of assigned field artillery battalion personnel by 30. The overall objective of the FAAPS Project is the development and demonstration of an improved process to accomplish these goals. The initial phase of the FAAPS Project and the subject of this study is the FAAPS conceptmore » evaluation. The concept evaluation consists of (1) identifying assumptions and requirements, (2) documenting the process flow, (3) identifying and evaluating technologies available to accomplish the necessary ammunition processing and storage operations, and (4) presenting alternative concepts with associated costs, processing rates, and manpower requirements for accomplishing the operation. This study provides insight into the achievability of the desired objectives.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, Wayne; Borders, Tammie

INL successfully developed a proof of concept for "Software Defined Anything" by emulating the laboratory's business applications that run on Virtual Machines. The work INL conducted demonstrates to industry on how this methodology can be used to improve security, automate and repeat processes, and improve consistency.

The Use of Multi-Criteria Evaluation and Network Analysis in the Area Development Planning Process

DTIC Science & Technology

2013-03-01

layouts. The alternative layout scoring process, base in multi-criteria evaluation, returns a quantitative score for each alternative layout and a...The purpose of this research was to develop improvements to the area development planning process. These plans are used to improve operations within...an installation sub-section by altering the physical layout of facilities. One methodology was developed based on apply network analysis concepts to

Strategic Foresight Process - Improvements for the Hungarian Ministry of Defense

DTIC Science & Technology

2016-06-01

enough to appropriately prepare for the migration crisis. This thesis introduces the evolution and main concepts of Futures Studies and Foresight. It...to appropriately prepare for the migration crisis. This thesis introduces the evolution and main concepts of Futures Studies and Foresight. It...STRATEGIC FORESIGHT .................................................................................3  A.  FUTURES STUDIES

Using computer simulation to improve high order thinking skills of physics teacher candidate students in Compton effect

NASA Astrophysics Data System (ADS)

Supurwoko; Cari; Sarwanto; Sukarmin; Fauzi, Ahmad; Faradilla, Lisa; Summa Dewi, Tiarasita

2017-11-01

The process of learning and teaching in Physics is often confronted with abstract concepts. It makes difficulty for students to understand and teachers to teach the concept. One of the materials that has an abstract concept is Compton Effect. The purpose of this research is to evaluate computer simulation model on Compton Effect material which is used to improve high thinking ability of Physics teacher candidate students. This research is a case study. The subject is students at physics educations who have attended Modern Physics lectures. Data were obtained through essay test for measuring students’ high-order thinking skills and quisioners for measuring students’ responses. The results obtained indicate that computer simulation model can be used to improve students’ high order thinking skill and can be used to improve students’ responses. With this result it is suggested that the audiences use the simulation media in learning

Lean methodology: supporting battlefield medical fitness by cutting process waste.

PubMed

Huggins, Elaine J

2010-01-01

Healthcare has long looked at decreasing risk in communication and patient care processes. Increasing the simplicity in communication and patient care process is a newer concept contained in Lean methodology. Lean is a strategy for achieving improvement in performance through the elimination of steps that use resources without contributing to customer value. This is known as cutting waste or nonvalue added steps. This article outlines how the use of Lean improved a key process that supports battlefield medical fitness.

Oceanic Flights and Airspace: Improving Efficiency by Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

Fernandes, Alicia Borgman; Rebollo, Juan; Koch, Michael

2016-01-01

Oceanic operations suffer from multiple inefficiencies, including pre-departure planning that does not adequately consider uncertainty in the proposed trajectory, restrictions on the routes that a flight operator can choose for an oceanic crossing, time-consuming processes and procedures for amending en route trajectories, and difficulties exchanging data between Flight Information Regions (FIRs). These inefficiencies cause aircraft to fly suboptimal trajectories, burning fuel and time that could be conserved. A concept to support integration of existing and emerging capabilities and concepts is needed to transition to an airspace system that employs Trajectory Based Operations (TBO) to improve efficiency and safety in oceanic operations. This paper describes such a concept and the results of preliminary activities to evaluate the concept, including a stakeholder feedback activity, user needs analysis, and high level benefits analysis.

A concept-based interactive biomedical image retrieval approach using visualness and spatial information

NASA Astrophysics Data System (ADS)

Rahman, Md M.; Antani, Sameer K.; Demner-Fushman, Dina; Thoma, George R.

2015-03-01

This paper presents a novel approach to biomedical image retrieval by mapping image regions to local concepts and represent images in a weighted entropy-based concept feature space. The term concept refers to perceptually distinguishable visual patches that are identified locally in image regions and can be mapped to a glossary of imaging terms. Further, the visual significance (e.g., visualness) of concepts is measured as Shannon entropy of pixel values in image patches and is used to refine the feature vector. Moreover, the system can assist user in interactively select a Region-Of-Interest (ROI) and search for similar image ROIs. Further, a spatial verification step is used as a post-processing step to improve retrieval results based on location information. The hypothesis that such approaches would improve biomedical image retrieval, is validated through experiments on a data set of 450 lung CT images extracted from journal articles from four different collections.

Agreement and disagreement on health care quality concepts among academic health professionals: the Saudi case.

PubMed

Mahrous, Mohamed Saad

2014-01-01

A systematic and rigorous implementation of quality improvement processes is likely to improve the well-being of staff members and heighten their job satisfaction. Assessing professionals' perceptions of health care quality should lead to the betterment of health care services. In Saudi Arabia, no previous studies examine how university health professionals view health care quality concepts. A cross-sectional analytical study employing a self-administered questionnaire with 43 statements assessing quality perceptions of academic health care professionals was used. Despite the agreement of health professionals on numerous quality concepts addressed in this study, there was insufficient agreement on 10 core quality concepts, 3 of which were the following: "quality focuses on customers" (50%), "quality is tangible and therefore measurable" (29.3%), and "quality is data-driven" (62%). Hence, providing health professionals with relevant training likely will generate a better understanding of quality concepts and optimize their performance.

Software process improvement in the NASA software engineering laboratory

NASA Technical Reports Server (NTRS)

Mcgarry, Frank; Pajerski, Rose; Page, Gerald; Waligora, Sharon; Basili, Victor; Zelkowitz, Marvin

1994-01-01

The Software Engineering Laboratory (SEL) was established in 1976 for the purpose of studying and measuring software processes with the intent of identifying improvements that could be applied to the production of ground support software within the Flight Dynamics Division (FDD) at the National Aeronautics and Space Administration (NASA)/Goddard Space Flight Center (GSFC). The SEL has three member organizations: NASA/GSFC, the University of Maryland, and Computer Sciences Corporation (CSC). The concept of process improvement within the SEL focuses on the continual understanding of both process and product as well as goal-driven experimentation and analysis of process change within a production environment.

The Power of Process Improvement

ERIC Educational Resources Information Center

Fairfield-Sonn, James W.; Morgan, Sandra; Sumukadas, Narendar

2004-01-01

Over the last several decades many systematic management approaches, such as Total Quality Management, aimed at improving organizational performance and employee satisfaction have captured organizations' attention. Given their origins in statistics, operations management, and engineering, many of the concepts and techniques are technical. When…

A Tutorial Design Process Applied to an Introductory Materials Engineering Course

ERIC Educational Resources Information Center

Rosenblatt, Rebecca; Heckler, Andrew F.; Flores, Katharine

2013-01-01

We apply a "tutorial design process", which has proven to be successful for a number of physics topics, to design curricular materials or "tutorials" aimed at improving student understanding of important concepts in a university-level introductory materials science and engineering course. The process involves the identification…

Computational Features of Flow Modeling in Nanostructured Sensors

NASA Astrophysics Data System (ADS)

Ionescu, Adela; Savu, Dan; Savu, Sorin; Coman, Daniela

2009-04-01

Nowadays the productivity of the welding processes represents an important factor in economy concepts. The technologies which are developed by the researchers are oriented to the increasing of the welding processes' productivity and to the improvement of the products' quality.

Proposing a New Framework and an Innovative Approach to Teaching Reengineering and ERP Implementation Concepts

ERIC Educational Resources Information Center

Pellerin, Robert; Hadaya, Pierre

2008-01-01

Recognizing the need to teach ERP implementation and business process reengineering (BPR) concepts simultaneously, as well as the pedagogical limitations of the case teaching method and simulation tools, the objective of this study is to propose a new framework and an innovative teaching approach to improve the ERP training experience for IS…

Using Concept Mapping to Improve Parent Implementation of Positive Behavioral Interventions for Children with Challenging Behaviors

ERIC Educational Resources Information Center

Alkahtani, Keetam D. F.

2013-01-01

Children's challenging behaviors can be addressed with effective interventions that can meet children's emotional needs and support their families. Positive Behavioral Interventions and Supports (PBIS) value the family involvement in the process of their child treatment. The intention of this study was to use concept mapping as an adjunct to PBIS…

The Impact of Project-Based Learning on Improving Student Learning Outcomes of Sustainability Concepts in Transportation Engineering Courses

ERIC Educational Resources Information Center

Fini, Elham H.; Awadallah, Faisal; Parast, Mahour M.; Abu-Lebdeh, Taher

2018-01-01

This paper describes an intervention to enhance students' learning by involving students in brainstorming activities about sustainability concepts and their implications in transportation engineering. The paper discusses the process of incorporating the intervention into a transportation course, as well as the impact of this intervention on…

An Investigation of the Effectiveness of Computer Simulation Programs as Tutorial Tools for Teaching Population Ecology at University.

ERIC Educational Resources Information Center

Korfiatis, K.; Papatheodorou, E.; Paraskevopoulous, S.; Stamou, G. P.

1999-01-01

Describes a study of the effectiveness of computer-simulation programs in enhancing biology students' familiarity with ecological modeling and concepts. Finds that computer simulations improved student comprehension of ecological processes expressed in mathematical form, but did not allow a full understanding of ecological concepts. Contains 28…

Concepts for on-board satellite image registration. Volume 3: Impact of VLSI/VHSIC on satellite on-board signal processing

NASA Technical Reports Server (NTRS)

Aanstoos, J. V.; Snyder, W. E.

1981-01-01

Anticipated major advances in integrated circuit technology in the near future are described as well as their impact on satellite onboard signal processing systems. Dramatic improvements in chip density, speed, power consumption, and system reliability are expected from very large scale integration. Improvements are expected from very large scale integration enable more intelligence to be placed on remote sensing platforms in space, meeting the goals of NASA's information adaptive system concept, a major component of the NASA End-to-End Data System program. A forecast of VLSI technological advances is presented, including a description of the Defense Department's very high speed integrated circuit program, a seven-year research and development effort.

The greenhouse gas and energy balance of different treatment concepts for bio-waste.

PubMed

Ortner, Maria E; Müller, Wolfgang; Bockreis, Anke

2013-10-01

The greenhouse gas (GHG) and energy performance of bio-waste treatment plants been investigated for three characteristic bio-waste treatment concepts: composting; biological drying for the production of biomass fuel fractions; and anaerobic digestion. Compared with other studies about the environmental impacts of bio-waste management, this study focused on the direct comparison of the latest process concepts and state-of-the-art emission control measures. To enable a comparison, the mass balance and products were modelled for all process concepts assuming the same bio-waste amounts and properties. In addition, the value of compost as a soil improver was included in the evaluation, using straw as a reference system. This aspect has rarely been accounted for in other studies. The study is based on data from operational facilities combined with literature data. The results show that all three concepts contribute to a reduction of GHG emissions and show a positive balance for cumulated energy demand. However, in contrast to other studies, the advantage of anaerobic digestion compared with composting is smaller as a result of accounting for the soil improving properties of compost. Still, anaerobic digestion is the environmentally superior solution. The results are intended to inform decision makers about the relevant aspects of bio-waste treatment regarding the environmental impacts of different bio-waste management strategies.

Cause-and-effect mapping of critical events.

PubMed

Graves, Krisanne; Simmons, Debora; Galley, Mark D

2010-06-01

Health care errors are routinely reported in the scientific and public press and have become a major concern for most Americans. In learning to identify and analyze errors health care can develop some of the skills of a learning organization, including the concept of systems thinking. Modern experts in improving quality have been working in other high-risk industries since the 1920s making structured organizational changes through various frameworks for quality methods including continuous quality improvement and total quality management. When using these tools, it is important to understand systems thinking and the concept of processes within organization. Within these frameworks of improvement, several tools can be used in the analysis of errors. This article introduces a robust tool with a broad analytical view consistent with systems thinking, called CauseMapping (ThinkReliability, Houston, TX, USA), which can be used to systematically analyze the process and the problem at the same time. Copyright 2010 Elsevier Inc. All rights reserved.

Evaluation of competence-based teaching in higher education: From theory to practice.

PubMed

Bergsmann, Evelyn; Schultes, Marie-Therese; Winter, Petra; Schober, Barbara; Spiel, Christiane

2015-10-01

Competence-based teaching in higher education institutions and its evaluation have become a prevalent topic especially in the European Union. However, evaluation instruments are often limited, for example to single student competencies or specific elements of the teaching process. The present paper provides a more comprehensive evaluation concept that contributes to sustainable improvement of competence-based teaching in higher education institutions. The evaluation concept considers competence research developments as well as the participatory evaluation approach. The evaluation concept consists of three stages. The first stage evaluates whether the competencies students are supposed to acquire within the curriculum (ideal situation) are well defined. The second stage evaluates the teaching process and the competencies students have actually acquired (real situation). The third stage evaluates concrete aspects of the teaching process. Additionally, an implementation strategy is introduced to support the transfer from the theoretical evaluation concept to practice. The evaluation concept and its implementation strategy are designed for internal evaluations in higher education and primarily address higher education institutions that have already developed and conducted a competence-based curriculum. Copyright © 2015 Elsevier Ltd. All rights reserved.

Search Radar Track-Before-Detect Using the Hough Transform.

DTIC Science & Technology

1995-03-01

before - detect processing method which allows previous data to help in target detection. The technique provides many advantages compared to...improved target detection scheme, applicable to search radars, using the Hough transform image processing technique. The system concept involves a track

Applying natural language processing techniques to develop a task-specific EMR interface for timely stroke thrombolysis: A feasibility study.

PubMed

Sung, Sheng-Feng; Chen, Kuanchin; Wu, Darren Philbert; Hung, Ling-Chien; Su, Yu-Hsiang; Hu, Ya-Han

2018-04-01

To reduce errors in determining eligibility for intravenous thrombolytic therapy (IVT) in stroke patients through use of an enhanced task-specific electronic medical record (EMR) interface powered by natural language processing (NLP) techniques. The information processing algorithm utilized MetaMap to extract medical concepts from IVT eligibility criteria and expanded the concepts using the Unified Medical Language System Metathesaurus. Concepts identified from clinical notes by MetaMap were compared to those from IVT eligibility criteria. The task-specific EMR interface displays IVT-relevant information by highlighting phrases that contain matched concepts. Clinical usability was assessed with clinicians staffing the acute stroke team by comparing user performance while using the task-specific and the current EMR interfaces. The algorithm identified IVT-relevant concepts with micro-averaged precisions, recalls, and F1 measures of 0.998, 0.812, and 0.895 at the phrase level and of 1, 0.972, and 0.986 at the document level. Users using the task-specific interface achieved a higher accuracy score than those using the current interface (91% versus 80%, p = 0.016) in assessing the IVT eligibility criteria. The completion time between the interfaces was statistically similar (2.46 min versus 1.70 min, p = 0.754). Although the information processing algorithm had room for improvement, the task-specific EMR interface significantly reduced errors in assessing IVT eligibility criteria. The study findings provide evidence to support an NLP enhanced EMR system to facilitate IVT decision-making by presenting meaningful and timely information to clinicians, thereby offering a new avenue for improvements in acute stroke care. Copyright © 2018 Elsevier B.V. All rights reserved.

[Biosafety provision on handling pathogenic biological agents on the concept of biorisk assessment and management].

PubMed

Dobrokhotskiĭ, O N; Kolombet, L V

2010-01-01

The paper shows it urgent to realize the concept of biological risk assessment and management on handling pathogenic biological agents (PBA). It gives a number of objective reasons that impede development of a methodology to assess laboratory biological risks. A concept of continuous improvement (a process approach) is proposed for use as a biorisk management tool for biosafety assurance when handling PBA. It is demonstrated that development of international cooperation urgently requires that national concepts and standards be harmonized with international regulatory documents on biosafety assurance on handling PBA.

Feedbacks between geomorphology and biota controlling Earth surface processes and landforms: A review of foundation concepts and current understandings

NASA Astrophysics Data System (ADS)

Corenblit, Dov; Baas, Andreas C. W.; Bornette, Gudrun; Darrozes, José; Delmotte, Sébastien; Francis, Robert A.; Gurnell, Angela M.; Julien, Frédéric; Naiman, Robert J.; Steiger, Johannes

2011-06-01

This review article presents recent advances in the field of biogeomorphology related to the reciprocal coupling between Earth surface processes and landforms, and ecological and evolutionary processes. The aim is to present to the Earth Science community ecological and evolutionary concepts and associated recent conceptual developments for linking geomorphology and biota. The novelty of the proposed perspective is that (1) in the presence of geomorphologic-engineer species, which modify sediment and landform dynamics, natural selection operating at the scale of organisms may have consequences for the physical components of ecosystems, and particularly Earth surface processes and landforms; and (2) in return, these modifications of geomorphologic processes and landforms often feed back to the ecological characteristics of the ecosystem (structure and function) and thus to biological characteristics of engineer species and/or other species (adaptation and speciation). The main foundation concepts from ecology and evolutionary biology which have led only recently to an improved conception of landform dynamics in geomorphology are reviewed and discussed. The biogeomorphologic macroevolutionary insights proposed explicitly integrate geomorphologic niche-dimensions and processes within an ecosystem framework and reflect current theories of eco-evolutionary and ecological processes. Collectively, these lead to the definition of an integrated model describing the overall functioning of biogeomorphologic systems over ecological and evolutionary timescales.

Progress of Aircraft System Noise Assessment with Uncertainty Quantification for the Environmentally Responsible Aviation Project

NASA Technical Reports Server (NTRS)

Thomas, Russell H.; Burley, Casey L.; Guo, Yueping

2016-01-01

Aircraft system noise predictions have been performed for NASA modeled hybrid wing body aircraft advanced concepts with 2025 entry-into-service technology assumptions. The system noise predictions developed over a period from 2009 to 2016 as a result of improved modeling of the aircraft concepts, design changes, technology development, flight path modeling, and the use of extensive integrated system level experimental data. In addition, the system noise prediction models and process have been improved in many ways. An additional process is developed here for quantifying the uncertainty with a 95% confidence level. This uncertainty applies only to the aircraft system noise prediction process. For three points in time during this period, the vehicle designs, technologies, and noise prediction process are documented. For each of the three predictions, and with the information available at each of those points in time, the uncertainty is quantified using the direct Monte Carlo method with 10,000 simulations. For the prediction of cumulative noise of an advanced aircraft at the conceptual level of design, the total uncertainty band has been reduced from 12.2 to 9.6 EPNL dB. A value of 3.6 EPNL dB is proposed as the lower limit of uncertainty possible for the cumulative system noise prediction of an advanced aircraft concept.

Concept Mapping as an Innovative Tool for the Assessment of Learning: An Experimental Experience among Business Management Degree Students

ERIC Educational Resources Information Center

Ruiz-Palomino, Pablo; Martinez-Canas, Ricardo

2013-01-01

In the search to improve the quality of education at the university level, the use of concept mapping is becoming an important instructional technique for enhancing the teaching-learning process. This educational tool is based on cognitive theories by making a distinction between learning by rote (memorizing) and learning by meaning, where…

Student Conceptions about the DNA Structure within a Hierarchical Organizational Level: Improvement by Experiment- and Computer-Based Outreach Learning

ERIC Educational Resources Information Center

Langheinrich, Jessica; Bogner, Franz X.

2015-01-01

As non-scientific conceptions interfere with learning processes, teachers need both, to know about them and to address them in their classrooms. For our study, based on 182 eleventh graders, we analyzed the level of conceptual understanding by implementing the "draw and write" technique during a computer-supported gene technology module.…

Constructing the integral concept on the basis of the idea of accumulation: suggestion for a high school curriculum

NASA Astrophysics Data System (ADS)

Kouropatov, Anatoli; Dreyfus, Tommy

2013-07-01

Students have a tendency to see integral calculus as a series of procedures with associated algorithms and many do not develop a conceptual grasp giving them the desirable versatility of thought. Thus, instead of a proceptual view of the symbols in integration, they have, at best, a process-oriented view. On the other hand, it is not surprising that many students find concepts such as the integral difficult when they are unable to experience these processes directly in the classroom. With a view towards improving this situation, constructing the integral concept on the basis of the idea of accumulation has been proposed (Educ Stud Math. 1994;26:229-274; Integral as accumulation: a didactical perspective for school mathematics; Thessaloniki: PME; 2009. p. 417-424). In this paper, we discuss a curriculum that is based on this idea and a design for curriculum materials that are intended to develop an improved cognitive base for a flexible proceptual understanding of the integral and integration in high school. The main focus is on how we (mathematics teachers and mathematics educators) might teach the integral concept in order to help high school students to construct meaningful knowledge alongside acquiring technical abilities.

Research possibilities? No! Needs for research to make PV solar energy utilization broadly competitive

NASA Technical Reports Server (NTRS)

Wolf, M.

1982-01-01

The historical progression of efficiency improvements, cost reductions, and performance improvements in modules and photovoltaic systems are described. The potential for future improvements in photovoltaic device efficiencies and cost reductions continues as device concepts, designs, processes, and automated production capabilities mature. Additional step-function improvements can be made as today's simpler devices are replaced by more sophisticated devices.

Integrating adaptive management and ecosystem services concepts to improve natural resource management: Challenges and opportunities

USGS Publications Warehouse

Epanchin-Niell, Rebecca S.; Boyd, James W.; Macauley, Molly K.; Scarlett, Lynn; Shapiro, Carl D.; Williams, Byron K.

2018-05-07

Executive Summary—OverviewNatural resource managers must make decisions that affect broad-scale ecosystem processes involving large spatial areas, complex biophysical interactions, numerous competing stakeholder interests, and highly uncertain outcomes. Natural and social science information and analyses are widely recognized as important for informing effective management. Chief among the systematic approaches for improving the integration of science into natural resource management are two emergent science concepts, adaptive management and ecosystem services. Adaptive management (also referred to as “adaptive decision making”) is a deliberate process of learning by doing that focuses on reducing uncertainties about management outcomes and system responses to improve management over time. Ecosystem services is a conceptual framework that refers to the attributes and outputs of ecosystems (and their components and functions) that have value for humans.This report explores how ecosystem services can be moved from concept into practice through connection to a decision framework—adaptive management—that accounts for inherent uncertainties. Simultaneously, the report examines the value of incorporating ecosystem services framing and concepts into adaptive management efforts.Adaptive management and ecosystem services analyses have not typically been used jointly in decision making. However, as frameworks, they have a natural—but to date underexplored—affinity. Both are policy and decision oriented in that they attempt to represent the consequences of resource management choices on outcomes of interest to stakeholders. Both adaptive management and ecosystem services analysis take an empirical approach to the analysis of ecological systems. This systems orientation is a byproduct of the fact that natural resource actions affect ecosystems—and corresponding societal outcomes—often across large geographic scales. Moreover, because both frameworks focus on resource systems, both must confront the analytical challenges of systems modeling—in terms of complexity, dynamics, and uncertainty.Given this affinity, the integration of ecosystem services analysis and adaptive management poses few conceptual hurdles. In this report, we synthesize discussions from two workshops that considered ways in which adaptive management approaches and ecosystem service concepts may be complementary, such that integrating them into a common framework may lead to improved natural resource management outcomes. Although the literature on adaptive management and ecosystem services is vast and growing, the report focuses specifically on the integration of these two concepts rather than aiming to provide new definitions or an indepth review or primer of the concepts individually.Key issues considered include the bidirectional links between adaptive decision making and ecosystem services, as well as the potential benefits and inevitable challenges arising in the development and use of an integrated framework. Specifically, the workshops addressed the following questions:How can application of ecosystem service analysis within an adaptive decision process improve the outcomes of management and advance understanding of ecosystem service identification, production, and valuation?How can these concepts be integrated in concept and practice?What are the constraints and challenges to integrating adaptive management and ecosystem services?And, should the integration of these concepts be moved forward to wider application—and if so, how?

Building information modelling (BIM) after ten years: Malaysian construction players’ perception of BIM

NASA Astrophysics Data System (ADS)

Latiffi, A. Ahmad; Brahim, J.; Fathi, M. S.

2017-08-01

Building Information Modelling (BIM) concept has expanded widely in many countries for more than a decade with its role of improving current practices in construction projects. However, the understanding of BIM differs among construction players, depending on how construction players utilize the concept in their projects. Therefore, this paper aims to explore the understanding of BIM concept among construction players in the Malaysian construction industry. A literature review on BIM concept and semi-structured interviews with construction players in BIM such as client, civil and structural (C&S) engineer and mechanical and electrical (M&E) engineer, quantity surveyor (QS), contractor, facilities manager and BIM consultant have been conducted in order to achieve this study’s the aim. The results show that the understanding of BIM concept among the construction players is limited to BIM as a process and technology. It is important for the construction players to improve their understanding of BIM as it can be used to enhance performance and productivity of construction projects.

TQM (Total Quality Management) SPARC (Special Process Action Review Committees) Handbook

DTIC Science & Technology

1989-08-01

This document describes the techniques used to support and guide the Special Process Action Review Committees for accomplishing their goals for Total Quality Management (TQM). It includes concepts and definitions, checklists, sample formats, and assessment criteria. Keywords: Continuous process improvement; Logistics information; Process analysis; Quality control; Quality assurance; Total Quality Management ; Statistical processes; Management Planning and control; Management training; Management information systems.

Space network scheduling benchmark: A proof-of-concept process for technology transfer

NASA Technical Reports Server (NTRS)

Moe, Karen; Happell, Nadine; Hayden, B. J.; Barclay, Cathy

1993-01-01

This paper describes a detailed proof-of-concept activity to evaluate flexible scheduling technology as implemented in the Request Oriented Scheduling Engine (ROSE) and applied to Space Network (SN) scheduling. The criteria developed for an operational evaluation of a reusable scheduling system is addressed including a methodology to prove that the proposed system performs at least as well as the current system in function and performance. The improvement of the new technology must be demonstrated and evaluated against the cost of making changes. Finally, there is a need to show significant improvement in SN operational procedures. Successful completion of a proof-of-concept would eventually lead to an operational concept and implementation transition plan, which is outside the scope of this paper. However, a high-fidelity benchmark using actual SN scheduling requests has been designed to test the ROSE scheduling tool. The benchmark evaluation methodology, scheduling data, and preliminary results are described.

Application of the suggestion system in the improvement of the production process and product quality control

NASA Astrophysics Data System (ADS)

Gołaś, H.; Mazur, A.; Gruszka, J.; Szafer, P.

2016-08-01

The elaboration is a case study and the research was carried out in the company Alco-Mot Ltd., which employs 120 people. The company specializes in the production of lead poles for industrial and traction batteries using gravity casting. The elements embedded in the cast are manufactured on a machining centre, which provides the stability of the process and of the dimensions of the product as well as a very short production time. As a result of observation and analysis the authors have developed a concept for the implementation of a dynamic suggestion system in ALCO-MOT, including, among others, a standard for actions in the implementation of the suggestion system, as well as clear guidelines for the processing and presentation of the activities undertaken in the time between the establishment of the concept (suggestions) and the benefits analysis after the proposed solutions have been implemented. The authors also present how suggestions proposed by ALCO-MOT staff contributed to the improvement of the processes of production and quality control. Employees offered more than 30 suggestions, of which more than a half are being implemented now and further actions are being prepared for implementation. The authors will present the results of improvements in, for example, tool replacement time, scrap reduction. The authors will present how kaizen can improve the production and quality control processes. They will present how the production and quality control processes looked before and after the implementation of employee suggestions.

Business Models for Training and Performance Improvement Departments

ERIC Educational Resources Information Center

Carliner, Saul

2004-01-01

Although typically applied to entire enterprises, the concept of business models applies to training and performance improvement groups. Business models are "the method by which firm[s] build and use [their] resources to offer.. value." Business models affect the types of projects, services offered, skills required, business processes, and type of…

Using Technology and Inquiry to Improve Student Understanding of Watershed Concepts

ERIC Educational Resources Information Center

Smith, Julie M.; Edwards, Patrick M.; Raschke, Jason

2006-01-01

This paper presents the design, implementation and assessment of the Columbia River Basin Environmental Research Project (CERP) curriculum. CERP is an online inquiry-based, regional geographic curriculum designed to improve technology skills and content knowledge about water quality and watershed-level processes. Student attitudes and knowledge…

Traditional Labs + New Questions = Improved Student Performance.

ERIC Educational Resources Information Center

Rezba, Richard J.; And Others

1992-01-01

Presents three typical lab activities involving the breathing rate of fish, the behavior of electromagnets, and tests for water hardness to demonstrate how labs can be modified to teach process skills. Discusses how basic concepts about experimentation are developed and ways of generating and improving science experiments. Includes a laboratory…

Exploring psychosocial task resolution and self-concept among African-American adolescents.

PubMed

Brookins, C C

1996-06-01

Developmental task resolution and self-concept of adolescents were examined for a sample of 110 African-American youth. The Erikson Psychosocial Stage Inventory was used to measure Erikson's stages of psychological development and the Bronstein-Cruz Child/Adolescent Self-concept and Adjustment Scale was used to measure multiple components of the self-concept. Scores for Self-concept and Resolution of Identity stages were highly correlated although scores on Resolution of Identity, commonly seen as the primary psychosocial task of adolescence, were not related to scores on either Emotional Well-being or Family Relations. The results are discussed in terms of improving understanding of relationships between processes in development, identity, and other salient psychosocial variables.

Monitoring outcomes with relational databases: does it improve quality of care?

PubMed

Clemmer, Terry P

2004-12-01

There are 3 key ingredients in improving quality of medial care: 1) using a scientific process of improvement, 2) executing the process at the lowest possible level in the organization, and 3) measuring the results of any change reliably. Relational databases when used within these guidelines are of great value in these efforts if they contain reliable information that is pertinent to the project and used in a scientific process of quality improvement by a front line team. Unfortunately, the data are frequently unreliable and/or not pertinent to the local process and is used by persons at very high levels in the organization without a scientific process and without reliable measurement of the outcome. Under these circumstances the effectiveness of relational databases in improving care is marginal at best, frequently wasteful and has the potential to be harmful. This article explores examples of these concepts.

BIT BY BIT: A Game Simulating Natural Language Processing in Computers

ERIC Educational Resources Information Center

Kato, Taichi; Arakawa, Chuichi

2008-01-01

BIT BY BIT is an encryption game that is designed to improve students' understanding of natural language processing in computers. Participants encode clear words into binary code using an encryption key and exchange them in the game. BIT BY BIT enables participants who do not understand the concept of binary numbers to perform the process of…

An Aspect-Oriented Framework for Business Process Improvement

NASA Astrophysics Data System (ADS)

Pourshahid, Alireza; Mussbacher, Gunter; Amyot, Daniel; Weiss, Michael

Recently, many organizations invested in Business Process Management Systems (BPMSs) in order to automate and monitor their processes. Business Activity Monitoring is one of the essential modules of a BPMS as it provides the core monitoring capabilities. Although the natural step after process monitoring is process improvement, most of the existing systems do not provide the means to help users with the improvement step. In this paper, we address this issue by proposing an aspect-oriented framework that allows the impact of changes to business processes to be explored with what-if scenarios based on the most appropriate process redesign patterns among several possibilities. As the four cornerstones of a BPMS are process, goal, performance and validation views, these views need to be aligned automatically by any approach that intends to support automated improvement of business processes. Our framework therefore provides means to reflect process changes also in the other views of the business process. A health care case study presented as a proof of concept suggests that this novel approach is feasible.

Space Station Mission Planning System (MPS) development study. Volume 2

NASA Technical Reports Server (NTRS)

Klus, W. J.

1987-01-01

The process and existing software used for Spacelab payload mission planning were studied. A complete baseline definition of the Spacelab payload mission planning process was established, along with a definition of existing software capabilities for potential extrapolation to the Space Station. This information was used as a basis for defining system requirements to support Space Station mission planning. The Space Station mission planning concept was reviewed for the purpose of identifying areas where artificial intelligence concepts might offer substantially improved capability. Three specific artificial intelligence concepts were to be investigated for applicability: natural language interfaces; expert systems; and automatic programming. The advantages and disadvantages of interfacing an artificial intelligence language with existing FORTRAN programs or of converting totally to a new programming language were identified.

Process Improvement of Reactive Dye Synthesis Using Six Sigma Concept

NASA Astrophysics Data System (ADS)

Suwanich, Thanapat; Chutima, Parames

2017-06-01

This research focuses on the problem occurred in the reactive dye synthesis process of a global manufacturer in Thailand which producing various chemicals for reactive dye products to supply global industries such as chemicals, textiles and garments. The product named “Reactive Blue Base” is selected in this study because it has highest demand and the current chemical yield shows a high variation, i.e. yield variation of 90.4% - 99.1% (S.D. = 2.405 and Cpk = -0.08) and average yield is 94.5% (lower than the 95% standard set by the company). The Six Sigma concept is applied aiming at increasing yield and reducing variation of this process. This approach is suitable since it provides a systematic guideline with five improvement phases (DMAIC) to effectively tackle the problem and find the appropriate parameter settings of the process. Under the new parameter settings, the process yield variation is reduced to range between 96.5% - 98.5% (S.D. = 0.525 and Cpk = 1.83) and the average yield is increased to 97.5% (higher than the 95% standard set by the company).

Dietary intake variations from pre-conception to gestational period according to the degree of industrial processing: A Brazilian cohort.

PubMed

Alves-Santos, Nadya Helena; Eshriqui, Ilana; Franco-Sena, Ana Beatriz; Cocate, Paula Guedes; Freitas-Vilela, Ana Amélia; Benaim, Camila; Vaz, Juliana Dos Santos; Castro, Maria Beatriz Trindade; Kac, Gilberto

2016-10-01

To estimate food intake changes from pre-conception to gestational period according to the degree of food processing. Prospective cohort conducted in a public health care center in Rio de Janeiro with Brazilian pregnant women (n = 189). A food frequency questionnaire was applied at the first (5(th)-13(th)) and third (30(th)-36(th)) gestational trimesters. The food items were classified according to characteristics of food processing in four groups: unprocessed/minimally processed foods; sugar/fat; processed foods and ultra-processed foods. The variation of food intake according to the degree of processing between the pre-conception and gestational period was compared using paired Student's t-test. Linear regression models were performed to estimate the association of mother's characteristics on the variation of food group contribution to the total energy intake between periods. Total energy intake was 2415 (SD = 813) in the pre-conception and 2379 (750) kcal in the gestational period. We excluded women who had implausible total energy intake (<600 and >6000 kcal/day). The contribution of unprocessed/minimally processed food group to total energy intake during pregnancy when compared to the pre-conception period was higher [50.5 (14.1) vs. 48.8 (12.4), p-value = 0.048], while the caloric share of ultra-processed food group was lower [41.3 (14.6) vs. 43.1 (12.5), p-value = 0.032]. We observed a negative association of age (p-value = 0.009) and a positive association of pre-pregnancy BMI (p-value = 0.060) with the variation of ultra-processed food intake. Ultra-processed food intake decreased, while minimally/unprocessed food intake slightly increased from the pre-conception to gestational period. These results indicate potential for a larger improvement in the women's diet quality and that nutritional counseling interventions in pregnant women are still needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

School Audits and School Improvement: Exploring the Variance Point Concept in Kentucky's Elementary, Middle, and High Schools

ERIC Educational Resources Information Center

Lyons, Robert; Barnett, David

2011-01-01

As a diagnostic intervention (Bowles, Churchill, Effrat, & McDermott, 2002) for schools failing to meet school improvement goals, Kentucky used a scholastic audit process based on nine standards and 88 associated indicators called the Standards and Indicators for School Improvement (SISI). Schools are rated on a scale of 1-4 on each indicator,…

The use of advanced steam reforming technology for hydrogen production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbishaw, J.B.; Cromarty, B.J.

1996-12-01

The demand for supplementary hydrogen production in refineries is growing significantly world-wide as environmental legislation concerning cleaner gasoline and diesel fuels is introduced. The main manufacturing method is by steam reforming. The process has been developed both to reduce the capital cost and increase efficiency, reliability and ease of operation. ICI Katalco`s Leading Concept Hydrogen or LCH process continues this process of improvement by replacing the conventional fired steam reformer with a type of heat exchange reformer known as the Gas Heated Reformer or GHR. The GHR was first used in the Leading Concept Ammonia process, LCA at ICI`s manufacturingmore » site at Severnside, England and commissioned in 1988 and later in the Leading Concept Methanol (LCM) process for methanol at Melbourne, Australia and commissioned in 1994. The development of the LCH process follows on from both LCA and LCM processes. This paper describes the development and use of the GHR in steam reforming, and shows how the GHR can be used in LCH. A comparison between the LCH process and a conventional hydrogen plant is given, showing the benefits of the LCH process in certain circumstances.« less

Improving timeliness and efficiency in the referral process for safety net providers: application of the Lean Six Sigma methodology.

PubMed

Deckard, Gloria J; Borkowski, Nancy; Diaz, Deisell; Sanchez, Carlos; Boisette, Serge A

2010-01-01

Designated primary care clinics largely serve low-income and uninsured patients who present a disproportionate number of chronic illnesses and face great difficulty in obtaining the medical care they need, particularly the access to specialty physicians. With limited capacity for providing specialty care, these primary care clinics generally refer patients to safety net hospitals' specialty ambulatory care clinics. A large public safety net health system successfully improved the effectiveness and efficiency of the specialty clinic referral process through application of Lean Six Sigma, an advanced process-improvement methodology and set of tools driven by statistics and engineering concepts.

Virtual Titrator: A Student-Oriented Instrument.

ERIC Educational Resources Information Center

Ritter, David; Johnson, Michael

1997-01-01

Describes a titrator system, constructed from a computer-interfaced pH-meter, that was designed to increase student involvement in the process. Combines automatic data collection with real-time graphical display and interactive controls to focus attention on the process rather than on bits of data. Improves understanding of concepts and…

Thematic issue on soil water infiltration

USDA-ARS?s Scientific Manuscript database

Infiltration is the term applied to the process of water entry into the soil, generally by downward flow through all or part of the soil surface. Understanding of infiltration concept and processes has greatly improved, over the past 30 years, and new insights have been given into modeling of non-un...

EO system concepts in the littoral

NASA Astrophysics Data System (ADS)

Schwering, Piet B. W.; van den Broek, Sebastiaan P.; van Iersel, Miranda

2007-04-01

In recent years, operations executed by naval forces have taken place at many different locations. At present, operations against international terrorism and asymmetric warfare in coastal environments are of major concern. In these scenarios, the threat caused by pirates on-board of small surface targets, such as jetskis and fast inshore attack crafts, is increasing. In the littoral environment, the understanding of its complexity and the efficient use of the limited reaction time, are essential for successful operations. Present-day electro-optical sensor suites, also incorporating Infrared Search and Track systems, can be used for varying tasks as detection, classification and identification. By means of passive electro-optical systems, infrared and visible light sensors, improved situational awareness can be achieved. For long range capability, elevated sensor masts and flying platforms are ideally suited for the surveillance task and improve situational awareness. A primary issue is how to incorporate new electro-optical technology and signal processing into the new sensor concepts, to improve system performance. It is essential to derive accurate information from the high spatial-resolution imagery created by the EO sensors. As electro-optical sensors do not have all-weather capability, the performance degradation in adverse scenarios must be understood, in order to support the operational use of adaptive sensor management techniques. In this paper we discuss the approach taken at TNO in the design and assessment of system concepts for future IRST development. An overview of our maritime programme in future IRST and EO system concepts including signal processing is presented.

[Video-based self-control in surgical teaching. A new tool in a new concept].

PubMed

Dahmen, U; Sänger, C; Wurst, C; Arlt, J; Wei, W; Dondorf, F; Richter, B; Settmacher, U; Dirsch, O

2013-10-01

Image and video-based results and process control are essential tools of a new teaching concept for conveying surgical skills. The new teaching concept integrates approved teaching principles and new media. Every performance of exercises is videotaped and the result photographically recorded. The quality of the process and result becomes accessible for an analysis by the teacher and the student/learner. The learner is instructed to perform a criteria-based self-analysis of the video and image material by themselves. The new learning concept has so far been successfully applied in seven rounds within the newly designed modular class "Intensivkurs Chirurgische Techniken" (Intensive training of surgical techniques). Result documentation and analysis via digital picture was completed by almost every student. The quality of the results was high. Interestingly the result quality did not correlate with the time needed for the exercise. The training success had a lasting effect. The new and elaborate concept improves the quality of teaching. In the long run resources for patient care should be saved when training students according to this concept prior to performing tasks in the operating theater. These resources should be allocated for further refining innovative teaching concepts.

Interactive Multimedia-Based Animation: A Study of Effectiveness on Fashion Design Technology Learning

NASA Astrophysics Data System (ADS)

Wiana, W.

2018-01-01

The learning process is believed will reach optimal results if facilitated by diversity of learning’s device from aspects of the approach, method, media or it’s evaluation system, in individually, groups, or as well as classical. One of the learning’s Device can be developed in an attempt to improve the results of the study is Computer Based Learning (CBL). CBL was developed aim to help students to understand the concepts of the learning material which presented interactively by the system and able to provide information and learning process better. This research is closely related to efforts to improve the quality of Fashion design in digital format learning, with specific targets to generate interactive multimedia-based animation as effective media and learning resources for fashion design learning. Applications that are generated may be an option for delivering learning material as well as to engender interest in learning as well as understanding with students against the subject matter so that it can improve the learning achievements of students. The instruments used to collect data is a test sheet of mastering the concept which developed on the basis of indicators understanding the concept of fashion design, the material elements and principles of fashion design as well as application on making fashion design. As for the skills test is done through test performance to making fashion design in digital format. The results of testing against the mastery of concepts and skills of fashion designing in digital formatted shows that experimental group obtained significantly higher qualifications compared to the control group. That means that the use of interactive multimedia-based animation, effective to increased mastery of concepts and skills on making fashion design in digital format.

A Survey of the Application of Multimedia in the Process of Teaching and Learning in KUiTTHO, Malaysia

ERIC Educational Resources Information Center

Kamaruddin, Nafisah Kamariah Md; Hamid, Mohd Zaidi Bin Abdul

2005-01-01

Scientific research shows that the process of remembering done in the human brain is faster when people receive many emphasizes in various forms for a short period. The concept of interactivity in multimedia helps the human brain to improve the process of learning. In addition, different approaches of multimedia make lessons very entertaining…

Development of the automatic test pattern generation for NPP digital electronic circuits using the degree of freedom concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, D.S.; Seong, P.H.

1995-08-01

In this paper, an improved algorithm for automatic test pattern generation (ATG) for nuclear power plant digital electronic circuits--the combinational type of logic circuits is presented. For accelerating and improving the ATG process for combinational circuits the presented ATG algorithm has the new concept--the degree of freedom (DF). The DF, directly computed from the system descriptions such as types of gates and their interconnections, is the criterion to decide which among several alternate lines` logic values required along each path promises to be the most effective in order to accelerate and improve the ATG process. Based on the DF themore » proposed ATG algorithm is implemented in the automatic fault diagnosis system (AFDS) which incorporates the advanced fault diagnosis method of artificial intelligence technique, it is shown that the AFDS using the ATG algorithm makes Universal Card (UV Card) testing much faster than the present testing practice or by using exhaustive testing sets.« less

Nanohole Arrays of Mixed Designs and Microwriting for Simultaneous and Multiple Protein Binding Studies

PubMed Central

Ji, Jin; Yang, Jiun-Chan; Larson, Dale N.

2009-01-01

We demonstrate using nanohole arrays of mixed designs and a microwriting process based on dip-pen nanolithography to monitor multiple, different protein binding events simultaneously in real time based on the intensity of Extraordinary Optical Transmission of nanohole arrays. The microwriting process and small footprint of the individual nanohole arrays enabled us to observe different binding events located only 16μm apart, achieving high spatial resolution. We also present a novel concept that incorporates nanohole arrays of different designs to improve confidence and accuracy of binding studies. For proof of concept, two types of nanohole arrays, designed to exhibit opposite responses to protein bindings, were fabricated on one transducer. Initial studies indicate that the mixed designs could help to screen out artifacts such as protein intrinsic signals, providing improved accuracy of binding interpretation. PMID:19297143

Advanced composite structural concepts and materials technologies for primary aircraft structures: Advanced material concepts

NASA Technical Reports Server (NTRS)

Lau, Kreisler S. Y.; Landis, Abraham L.; Chow, Andrea W.; Hamlin, Richard D.

1993-01-01

To achieve acceptable performance and long-term durability at elevated temperatures (350 to 600 F) for high-speed transport systems, further improvements of the high-performance matrix materials will be necessary to achieve very long-term (60,000-120,000 service hours) retention of mechanical properties and damage tolerance. This report emphasizes isoimide modification as a complementary technique to semi-interpenetrating polymer networks (SIPN's) to achieve greater processibility, better curing dynamics, and possibly enhanced thermo-mechanical properties in composites. A key result is the demonstration of enhanced processibility of isoimide-modified linear and thermo-setting polyimide systems.

Retrofit concept for small safety related stationary machines

NASA Astrophysics Data System (ADS)

Epple, S.; Jalba, C. K.; Muminovic, A.; Jung, R.

2017-05-01

More and more old machines have the problem that their control electronics’ lifecycle comes to its intended end of life, whilst the mechanics itself and process capability is still in very good condition. This article shows an example of a reactive ion etcher originally built in 1988, which was refitted with a new control concept. The original control unit was repaired several times based on manufacturer’s obsolescence management. At start of the retrofit project the integrated circuits were no longer available for further repair of the original control unit. Safety, repeatability and stability of the process were greatly improved.

Improved Linear-Ion-Trap Frequency Standard

NASA Technical Reports Server (NTRS)

Prestage, John D.

1995-01-01

Improved design concept for linear-ion-trap (LIT) frequency-standard apparatus proposed. Apparatus contains lengthened linear ion trap, and ions processed alternately in two regions: ions prepared in upper region of trap, then transported to lower region for exposure to microwave radiation, then returned to upper region for optical interrogation. Improved design intended to increase long-term frequency stability of apparatus while reducing size, mass, and cost.

Focus groups to explore healthcare professionals' experiences of care coordination: towards a theoretical framework for the study of care coordination.

PubMed

Van Houdt, Sabine; Sermeus, Walter; Vanhaecht, Kris; De Lepeleire, Jan

2014-12-24

Strategies to improve care coordination between primary and hospital care do not always have the desired results. This is partly due to incomplete understanding of the key concepts of care coordination. An in-depth analysis of existing theoretical frameworks for the study of care coordination identified 14 interrelated key concepts. In another study, these 14 key concepts were further explored in patients' experiences. Additionally, "patient characteristics" was identified as a new key concept in patients' experiences and the previously identified key concept "quality of relationship" between healthcare professionals was extended to "quality of relationship" with the patient. Together, these 15 interrelated key concepts resulted in a new theoretical framework. The present study aimed at improving our understanding of the 15 previously identified key concepts and to explore potentially previous unidentified key concepts and the links between these by exploring how healthcare professionals experience care coordination. A qualitative design was used. Six focus groups were conducted including primary healthcare professionals involved in the care of patients who had breast cancer surgery at three hospitals in Belgium. Data were analyzed using constant comparative analysis. All 15 previously identified key concepts of care coordination were further explored in healthcare professionals' experiences. Links between these 15 concepts were identified, including 9 newly identified links. The concept "external factors" was linked with all 6 concepts relating to (inter)organizational mechanisms; "task characteristics", "structure", "knowledge and information technology", "administrative operational processes", "cultural factors" and "need for coordination". Five of these concepts related to 3 concepts of relational coordination; "roles", "quality of relationship" and "exchange of information". The concept of "task characteristics" was only linked with "roles" and "exchange of information". The concept "patient characteristics" related with the concepts "need for coordination" and "patient outcome". Outcome was influenced by "roles", "quality of relationship" and "exchange of information". External factors and the (inter)organizational mechanism should enhance "roles" and "quality of relationship" between healthcare professionals and with the patient as well as "exchange of information", and setting and sharing of common "goals" to improve care coordination and quality of care.

Concepts and challenges in quantitative pharmacology and model-based drug development.

PubMed

Zhang, Liping; Pfister, Marc; Meibohm, Bernd

2008-12-01

Model-based drug development (MBDD) has been recognized as a concept to improve the efficiency of drug development. The acceptance of MBDD from regulatory agencies, industry, and academia has been growing, yet today's drug development practice is still distinctly distant from MBDD. This manuscript is aimed at clarifying the concept of MBDD and proposing practical approaches for implementing MBDD in the pharmaceutical industry. The following concepts are defined and distinguished: PK-PD modeling, exposure-response modeling, pharmacometrics, quantitative pharmacology, and MBDD. MBDD is viewed as a paradigm and a mindset in which models constitute the instruments and aims of drug development efforts. MBDD covers the whole spectrum of the drug development process instead of being limited to a certain type of modeling technique or application area. The implementation of MBDD requires pharmaceutical companies to foster innovation and make changes at three levels: (1) to establish mindsets that are willing to get acquainted with MBDD, (2) to align processes that are adaptive to the requirements of MBDD, and (3) to create a closely collaborating organization in which all members play a role in MBDD. Pharmaceutical companies that are able to embrace the changes MBDD poses will likely be able to improve their success rate in drug development, and the beneficiaries will ultimately be the patients in need.

Consolidation of graphite thermoplastic textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Mahon, J.

1991-01-01

The use of innovative cost effective material forms and processes is being considered for fabrication of future primary aircraft structures. Processes that have been identified as meeting these goals are textile preforms that use resin transfer molding (RTM) and consolidation forming. The Novel Composites for Wing and Fuselage Applications (NCWFA) program has as its objective the integration of innovative design concepts with cost effective fabrication processes to develop damage-tolerant structures that can perform at a design ultimate strain level of 6000 micro-inch/inch. In this on-going effort, design trade studies were conducted to arrive at advanced wing designs that integrate new material forms with innovative structural concepts and cost effective fabrication methods. The focus has been on minimizing part count (mechanical fasteners, clips, number of stiffeners, etc.), by using cost effective textile reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low-cost resin transfer molding processing, and thermoplastic forming concepts. The fabrication of representative Y spars by consolidation methods will be described. The Y spars were fabricated using AS4 (6K)/PEEK 150g commingled angle interlock 0/90-degree woven preforms with +45-degree commingled plies stitched using high strength Toray carbon thread and processed by autoclave consolidation.

A Study of Cognitive Load for Enhancing Student’s Quantitative Literacy in Inquiry Lab Learning

NASA Astrophysics Data System (ADS)

Nuraeni, E.; Rahman, T.; Alifiani, D. P.; Khoerunnisa, R. S.

2017-09-01

Students often find it difficult to appreciate the relevance of the role of quantitative analysis and concept attainment in the science class. This study measured student cognitive load during the inquiry lab of the respiratory system to improve quantitative literacy. Participants in this study were 40 11th graders from senior high school in Indonesia. After students learned, their feelings about the degree of mental effort that it took to complete the learning tasks were measured by 28 self-report on a 4-point Likert scale. The Task Complexity Worksheet were used to asses processing quantitative information and paper based test were applied to assess participants’ concept achievements. The results showed that inquiry instructional induced a relatively low mental effort, high processing information and high concept achievments.

Point-to-Point! Validation of the Small Aircraft Transportation System Higher Volume Operations Concept

NASA Technical Reports Server (NTRS)

Williams, Daniel M.

2006-01-01

Described is the research process that NASA researchers used to validate the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept. The four phase building-block validation and verification process included multiple elements ranging from formal analysis of HVO procedures to flight test, to full-system architecture prototype that was successfully shown to the public at the June 2005 SATS Technical Demonstration in Danville, VA. Presented are significant results of each of the four research phases that extend early results presented at ICAS 2004. HVO study results have been incorporated into the development of the Next Generation Air Transportation System (NGATS) vision and offer a validated concept to provide a significant portion of the 3X capacity improvement sought after in the United States National Airspace System (NAS).

Integrative Structural Biomechanical Concepts of Ankylosing Spondylitis

PubMed Central

Masi, Alfonse T.; Nair, Kalyani; Andonian, Brian J.; Prus, Kristina M.; Kelly, Joseph; Sanchez, Jose R.; Henderson, Jacqueline

2011-01-01

Ankylosing spondylitis (AS) is not fully explained by inflammatory processes. Clinical, epidemiological, genetic, and course of disease features indicate additional host-related risk processes and predispositions. Collectively, the pattern of predisposition to onset in adolescent and young adult ages, male preponderance, and widely varied severity of AS is unique among rheumatic diseases. However, this pattern could reflect biomechanical and structural differences between the sexes, naturally occurring musculoskeletal changes over life cycles, and a population polymorphism. During juvenile development, the body is more flexible and weaker than during adolescent maturation and young adulthood, when strengthening and stiffening considerably increase. During middle and later ages, the musculoskeletal system again weakens. The novel concept of an innate axial myofascial hypertonicity reflects basic mechanobiological principles in human function, tissue reactivity, and pathology. However, these processes have been little studied and require critical testing. The proposed physical mechanisms likely interact with recognized immunobiological pathways. The structural biomechanical processes and tissue reactions might possibly precede initiation of other AS-related pathways. Research in the combined structural mechanobiology and immunobiology processes promises to improve understanding of the initiation and perpetuation of AS than prevailing concepts. The combined processes might better explain characteristic enthesopathic and inflammatory processes in AS. PMID:22216409

Comparison of resin film infusion, resin transfer molding, and consolidation of textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Dastin, S.

1992-01-01

Innovative design concepts and cost effective fabrication processes were developed for damage tolerant primary structures that can perform at a design ultimate strain level of 6000 micro inch/inch. Attention focused on the use of textile high performance fiber reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low cost resin film infusion (RFI) and resin transfer molding (RTM) processes, and thermoplastic forming concepts. The fabrication of wing 'Y' spars by four different materials and/or processes methods is described: fabricated using IM7 angle interlock 0 to 90 deg woven preforms with + or - 45 deg plies stitched with Toray high strength graphite thread and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms using RTM and Tactix 123/H41 epoxy; and fabricated preforms using AS4(6K)/PEEK 150 g commingled angle interlock 0 to 90 deg woven preforms with + or - 45 deg commingled plies stitched using high strength graphite thread and processed by consolidation. Structural efficiency, processability, and acquisition cost are compared.

Building the Foundation for Data-Based Decision Making: Creating Consensus on Language and Concepts

ERIC Educational Resources Information Center

Crum, Karen

2009-01-01

Data Based Decision Making (DBDM), the process of gathering, analyzing, applying, and sharing data in order to promote school improvement, has recently become a prominent process in the quest to assist students in attaining educational success and helping schools meet accountability benchmarks (Wayman, 2005; Poynton & Carey, 2006). This…

A Man-in-the-Loop Support Concept for Military Ambush Threat-Assessment Based on Reconnaissance Reports

DTIC Science & Technology

2004-03-01

On all levels of the military command hierarchy there is a strong demand for support through the automated processing of reconnaissance reports. This...preconditions for the improvement of computer support and then illustrates the automated processing of report information using a military ambush situation in

Institutional Researchers as Knowledge Managers in Universities: Envisioning New Roles for the IR Profession

ERIC Educational Resources Information Center

Teodorescu, Daniel

2006-01-01

Using concepts from Davenport and Prusak's "Working Knowledge" and other recent research on knowledge management, this article discusses the processes through which institutional knowledge is created, managed and transferred throughout the university and ways in which institutional researchers can improve these processes. A special emphasis is…

Transforming care in nursing: a concept analysis.

PubMed

Vázquez-Calatayud, Mónica; Oroviogoicoechea, Cristina; Saracibar, Maribel; Pumar-Méndez, María J

2017-04-01

Although the concept of 'Transforming care' is promising for improving health care, there is no consensus in the field as to its definition. The aim of this concept analysis is to develop a deeper understanding of the term 'Transforming care' within the nursing discipline, in order to facilitate its comprehension, implementation, and evaluation. We performed a comprehensive literature review on electronic databases such as Medline (PubMed), Cinahl (Ebsco), Cochrane Library, PsycINFO (Ovid), Web of Science, Wiley-Blackwell, ScienceDirect, and SpringerLink and used Walker and Avant's approach to analyse the concept. From the 20 studies selected for this analysis, 3 main attributes of 'Transforming care' were identified: patient-centredness, evidence-based change, and transformational leadership driven. We suggest an operational definition to facilitate the implementation of the concept in practice. Furthermore, we propose that implementation is guided by the following key ideas: (1) fostering a culture of continuous improvement; (2) encouraging bottom-up initiatives; (3) promoting patient-centred care; and (4) using transformational leadership. Lastly, the evaluation of 'Transforming care' initiatives should assess care processes and professionals' and patients' outcomes.

Closed cycle construction: an integrated process for the separation and reuse of C&D waste.

PubMed

Mulder, Evert; de Jong, Tako P R; Feenstra, Lourens

2007-01-01

In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.

Recent developments in smart freezing technology applied to fresh foods.

PubMed

Xu, Ji-Cheng; Zhang, Min; Mujumdar, Arun S; Adhikari, Benu

2017-09-02

Due to the increased awareness of consumers in sensorial and nutritional quality of frozen foods, the freezing technology has to seek new and innovative technologies for better retaining the fresh like quality of foods. In this article, we review the recent developments in smart freezing technology applied to fresh foods. The application of these intelligent technologies and the associated underpinning concepts have greatly improved the quality of frozen foods and the freezing efficiency. These technologies are able to automatically collect the information in-line during freezing and help control the freezing process better. Smart freezing technology includes new and intelligent technologies and concepts applied to the pretreatment of the frozen product, freezing processes, cold chain logistics as well as warehouse management. These technologies enable real-time monitoring of quality during the freezing process and help improve product quality and freezing efficiency. We also provide a brief overview of several sensing technologies used to achieve automatic control of individual steps of freezing process. These sensing technologies include computer vision, electronic nose, electronic tongue, digital simulation, confocal laser, near infrared spectroscopy, nuclear magnetic resonance technology and ultrasound. Understanding of the mechanism of these new technologies will be helpful for applying them to improve the quality of frozen foods.

Neurolinguistic approach to natural language processing with applications to medical text analysis.

PubMed

Duch, Włodzisław; Matykiewicz, Paweł; Pestian, John

2008-12-01

Understanding written or spoken language presumably involves spreading neural activation in the brain. This process may be approximated by spreading activation in semantic networks, providing enhanced representations that involve concepts not found directly in the text. The approximation of this process is of great practical and theoretical interest. Although activations of neural circuits involved in representation of words rapidly change in time snapshots of these activations spreading through associative networks may be captured in a vector model. Concepts of similar type activate larger clusters of neurons, priming areas in the left and right hemisphere. Analysis of recent brain imaging experiments shows the importance of the right hemisphere non-verbal clusterization. Medical ontologies enable development of a large-scale practical algorithm to re-create pathways of spreading neural activations. First concepts of specific semantic type are identified in the text, and then all related concepts of the same type are added to the text, providing expanded representations. To avoid rapid growth of the extended feature space after each step only the most useful features that increase document clusterization are retained. Short hospital discharge summaries are used to illustrate how this process works on a real, very noisy data. Expanded texts show significantly improved clustering and may be classified with much higher accuracy. Although better approximations to the spreading of neural activations may be devised a practical approach presented in this paper helps to discover pathways used by the brain to process specific concepts, and may be used in large-scale applications.

Changes in Accounting Education: Improving Principles Content for Better Understanding.

ERIC Educational Resources Information Center

Boyd, David T.; Boyd, Sanithia C.; Boyd, William L.

2000-01-01

Offers suggestions for more effective teaching of the first course of accounting in terms of time, content, and process. Suggests the use of visual aids and the concepts approach. (Contains 18 references.) (JOW)

Proof of concept for a new energy-positive wastewater treatment scheme.

PubMed

Remy, C; Boulestreau, M; Lesjean, B

2014-01-01

For improved exploitation of the energy content present in the organic matter of raw sewage, an innovative concept for treatment of municipal wastewater is tested in pilot trials and assessed in energy balance and operational costs. The concept is based on a maximum extraction of organic matter into the sludge via coagulation, flocculation and microsieving (100 μm mesh size) to increase the energy recovery in anaerobic sludge digestion and decrease aeration demand for carbon mineralisation. Pilot trials with real wastewater yield an extraction of 70-80% of total chemical oxygen demand into the sludge while dosing 15-20 mg/L Al and 5-7 mg/L polymer with stable operation of the microsieve and effluent limits below 2-3 mg/L total phosphorus. Anaerobic digestion of the microsieve sludge results in high biogas yields of 600 NL/kg organic dry matter input (oDMin) compared to 430 NL/kg oDMin for mixed sludge from a conventional activated sludge process. The overall energy balance for a 100,000 population equivalent (PE) treatment plant (including biofilter for post-treatment with full nitrification and denitrification with external carbon source) shows that the new concept is an energy-positive treatment process with comparable effluent quality than conventional processes, even when including energy demand for chemicals production. Estimated operating costs for electricity and chemicals are in the same range for conventional activated sludge processes and the new concept.

Maturing Defense Support of Civil Authorities and the Dual Status Commander Arrangement Through the Lens of Process Improvement

DTIC Science & Technology

2015-04-01

strategic leaders and provide well-being education and support by developing self -awareness through leader feedback and leader resiliency. The School of...The concepts, philosophy, and theory of strategy; and, • Other issues of importance to the leadership of the Army. Studies produced by civilian and...ARRANGEMENT THROUGH THE LENS OF PROCESS IMPROVEMENT Ryan Burke Sue McNeil April 2015 The views expressed in this report are those of the authors

Towards an International Classification for Patient Safety: key concepts and terms

PubMed Central

Runciman, William; Hibbert, Peter; Thomson, Richard; Van Der Schaaf, Tjerk; Sherman, Heather; Lewalle, Pierre

2009-01-01

Background Understanding the patient safety literature has been compromised by the inconsistent use of language. Objectives To identify key concepts of relevance to the International Patient Safety Classification (ICPS) proposed by the World Alliance For Patient Safety of the World Health Organization (WHO), and agree on definitions and preferred terms. Methods Six principles were agreed upon—that the concepts and terms should: be applicable across the full spectrum of healthcare; be consistent with concepts from other WHO Classifications; have meanings as close as possible to those in colloquial use; convey the appropriate meanings with respect to patient safety; be brief and clear, without unnecessary or redundant qualifiers; be fit-for-purpose for the ICPS. Results Definitions and preferred terms were agreed for 48 concepts of relevance to the ICPS; these were described and the relationships between them and the ICPS were outlined. Conclusions The consistent use of key concepts, definitions and preferred terms should pave the way for better understanding, for comparisons between facilities and jurisdictions, and for trends to be tracked over time. Changes and improvements, translation into other languages and alignment with other sets of patient safety definitions will be necessary. This work represents the start of an ongoing process of progressively improving a common international understanding of terms and concepts relevant to patient safety. PMID:19147597

Strategies for Derisking Translational Processes for Biomedical Technologies.

PubMed

Abou-El-Enein, Mohamed; Duda, Georg N; Gruskin, Elliott A; Grainger, David W

2017-02-01

Inefficient translational processes for technology-oriented biomedical research have led to some prominent and frequent failures in the development of many leading drug candidates, several designated investigational drugs, and some medical devices, as well as documented patient harm and postmarket product withdrawals. Derisking this process, particularly in the early stages, should increase translational efficiency and streamline resource utilization, especially in an academic setting. In this opinion article, we identify a 12-step guideline for reducing risks typically associated with translating medical technologies as they move toward prototypes, preclinical proof of concept, and possible clinical testing. Integrating the described 12-step process should prove valuable for improving how early-stage academic biomedical concepts are cultivated, culled, and manicured toward intended clinical applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fuzzy-based propagation of prior knowledge to improve large-scale image analysis pipelines

PubMed Central

Mikut, Ralf

2017-01-01

Many automatically analyzable scientific questions are well-posed and a variety of information about expected outcomes is available a priori. Although often neglected, this prior knowledge can be systematically exploited to make automated analysis operations sensitive to a desired phenomenon or to evaluate extracted content with respect to this prior knowledge. For instance, the performance of processing operators can be greatly enhanced by a more focused detection strategy and by direct information about the ambiguity inherent in the extracted data. We present a new concept that increases the result quality awareness of image analysis operators by estimating and distributing the degree of uncertainty involved in their output based on prior knowledge. This allows the use of simple processing operators that are suitable for analyzing large-scale spatiotemporal (3D+t) microscopy images without compromising result quality. On the foundation of fuzzy set theory, we transform available prior knowledge into a mathematical representation and extensively use it to enhance the result quality of various processing operators. These concepts are illustrated on a typical bioimage analysis pipeline comprised of seed point detection, segmentation, multiview fusion and tracking. The functionality of the proposed approach is further validated on a comprehensive simulated 3D+t benchmark data set that mimics embryonic development and on large-scale light-sheet microscopy data of a zebrafish embryo. The general concept introduced in this contribution represents a new approach to efficiently exploit prior knowledge to improve the result quality of image analysis pipelines. The generality of the concept makes it applicable to practically any field with processing strategies that are arranged as linear pipelines. The automated analysis of terabyte-scale microscopy data will especially benefit from sophisticated and efficient algorithms that enable a quantitative and fast readout. PMID:29095927

Benchmarking initiatives in the water industry.

PubMed

Parena, R; Smeets, E

2001-01-01

Customer satisfaction and service care are every day pushing professionals in the water industry to seek to improve their performance, lowering costs and increasing the provided service level. Process Benchmarking is generally recognised as a systematic mechanism of comparing one's own utility with other utilities or businesses with the intent of self-improvement by adopting structures or methods used elsewhere. The IWA Task Force on Benchmarking, operating inside the Statistics and Economics Committee, has been committed to developing a general accepted concept of Process Benchmarking to support water decision-makers in addressing issues of efficiency. In a first step the Task Force disseminated among the Committee members a questionnaire focused on providing suggestions about the kind, the evolution degree and the main concepts of Benchmarking adopted in the represented Countries. A comparison among the guidelines adopted in The Netherlands and Scandinavia has recently challenged the Task Force in drafting a methodology for a worldwide process benchmarking in water industry. The paper provides a framework of the most interesting benchmarking experiences in the water sector and describes in detail both the final results of the survey and the methodology focused on identification of possible improvement areas.

Improving Logistics Processes in Industry Using Web Technologies

NASA Astrophysics Data System (ADS)

Jánošík, Ján; Tanuška, Pavol; Václavová, Andrea

2016-12-01

The aim of this paper is to propose the concept of a system that takes advantage of web technologies and integrates them into the management process and management of internal stocks which may relate to external applications and creates the conditions to transform a Computerized Control of Warehouse Stock (CCWS) in the company. The importance of implementing CCWS is in the elimination of the claims caused by the human factor, as well as to allow the processing of information for analytical purposes and their subsequent use to improve internal processes. Using CCWS in the company would also facilitate better use of the potential tools Business Intelligence and Data Mining.

Telemetry packetization for improved mission operations. [instrument packages for Space Shuttle mission operations data management

NASA Technical Reports Server (NTRS)

Greene, E. P.

1976-01-01

The requirements for mission-operations data management will accelerate sharply when the Space Transportation System (i.e., Space Shuttle) becomes the primary vehicle for research from space. These demands can be satisfied most effectively by providing a higher-level source encoding function within the spaceborne vehicle. An Instrument Telemetry Packet (ITP) concept is described which represents an alternative to the conventional multiplexed telemetry frame approach for acquiring spaceborne instrument data. By providing excellent data-integrity protection at the source and a variable instrument bandwidth capability, this ITP concept represents a significant improvement over present data acquisition procedures. Realignments in the ground telemetry processing functions are described which are intended to take advantage of the ITP concept and to make the data management system more responsive to the scientific investigators.

Spurious symptom reduction in fault monitoring

NASA Technical Reports Server (NTRS)

Shontz, William D.; Records, Roger M.; Choi, Jai J.

1993-01-01

Previous work accomplished on NASA's Faultfinder concept suggested that the concept was jeopardized by spurious symptoms generated in the monitoring phase. The purpose of the present research was to investigate methods of reducing the generation of spurious symptoms during in-flight engine monitoring. Two approaches for reducing spurious symptoms were investigated. A knowledge base of rules was constructed to filter known spurious symptoms and a neural net was developed to improve the expectation values used in the monitoring process. Both approaches were effective in reducing spurious symptoms individually. However, the best results were obtained using a hybrid system combining the neural net capability to improve expectation values with the rule-based logic filter.

Researchers Apply Lesson Study: A Cycle of Lesson Planning, Implementation, and Revision

ERIC Educational Resources Information Center

Regan, Kelley S.; Evmenova, Anya S.; Kurz, Leigh Ann; Hughes, Melissa D.; Sacco, Donna; Ahn, Soo Y.; MacVittie, Nichole; Good, Kevin; Boykin, Andrea; Schwartzer, Jessica; Chirinos, David S.

2016-01-01

Scripted lesson plans and/or professional development alone may not be sufficient to encourage teachers to reflect on the quality of their teaching and improve their teaching. One learning tool that teachers may use to improve their teaching is Lesson Study (LS). LS is a collaborative process involving educators, based on concepts of iteration and…

Defense Acquisition Structures and Capabilities Review

DTIC Science & Technology

2007-06-01

systems to joint portfolio management Refinement of a human capital strategy Improvement of governance of the business transformation effort...Management, Senior- Level Tri-Chaired investment panel for the new Concept Decision process for major programs, and Defense Acquisition Executive Summary...establishment of centers of excellence. DLA reorganized to implement the Business Systems Modernization (BSM) initiative designed to improve end-to-end

Preliminary Evaluation Report on the Los Angeles City Schools SB 28 Demonstration Program in Mathematics. CSE Working Paper No. 1.

ERIC Educational Resources Information Center

Gordon, C. Wayne

The objectives of the Los Angeles Model Mathematics Project (LAMMP) are stated by the administration as improvement of mathematical skills and understanding of mathematical concepts; improvement of the pupils' self-image; identification of specific assets and limitations relating to the learning process; development and use of special…

Accelerating what works: using qualitative research methods in developing a change package for a learning collaborative.

PubMed

Sorensen, Asta V; Bernard, Shulamit L

2012-02-01

Learning (quality improvement) collaboratives are effective vehicles for driving coordinated organizational improvements. A central element of a learning collaborative is the change package-a catalogue of strategies, change concepts, and action steps that guide participants in their improvement efforts. Despite a vast literature describing learning collaboratives, little to no information is available on how the guiding strategies, change concepts, and action items are identified and developed to a replicable and actionable format that can be used to make measurable improvements within participating organizations. The process for developing the change package for the Health Resources and Services Administration's (HRSA) Patient Safety and Clinical Pharmacy Services Collaborative entailed environmental scan and identification of leading practices, case studies, interim debriefing meetings, data synthesis, and a technical expert panel meeting. Data synthesis involved end-of-day debriefings, systematic qualitative analyses, and the use of grounded theory and inductive data analysis techniques. This approach allowed systematic identification of innovative patient safety and clinical pharmacy practices that could be adopted in diverse environments. A case study approach enabled the research team to study practices in their natural environments. Use of grounded theory and inductive data analysis techniques enabled identification of strategies, change concepts, and actionable items that might not have been captured using different approaches. Use of systematic processes and qualitative methods in identification and translation of innovative practices can greatly accelerate the diffusion of innovations and practice improvements. This approach is effective whether or not an individual organization is part of a learning collaborative.

Improved Traceability of Mission Concept to Requirements Using Model Based Systems Engineering

NASA Technical Reports Server (NTRS)

Reil, Robin

2014-01-01

Model Based Systems Engineering (MBSE) has recently been gaining significant support as a means to improve the traditional document-based systems engineering (DBSE) approach to engineering complex systems. In the spacecraft design domain, there are many perceived and propose benefits of an MBSE approach, but little analysis has been presented to determine the tangible benefits of such an approach (e.g. time and cost saved, increased product quality). This thesis presents direct examples of how developing a small satellite system model can improve traceability of the mission concept to its requirements. A comparison of the processes and approaches for MBSE and DBSE is made using the NASA Ames Research Center SporeSat CubeSat mission as a case study. A model of the SporeSat mission is built using the Systems Modeling Language standard and No Magics MagicDraw modeling tool. The model incorporates mission concept and requirement information from the missions original DBSE design efforts. Active dependency relationships are modeled to analyze the completeness and consistency of the requirements to the mission concept. Overall experience and methodology are presented for both the MBSE and original DBSE design efforts of SporeSat.

Real World Data Driven Evolution of Volvo Cars’ Side Impact Protection Systems and their Effectiveness

PubMed Central

Jakobsson, Lotta; Lindman, Magdalena; Svanberg, Bo; Carlsson, Henrik

2010-01-01

This study analyses the outcome of the continuous improved occupant protection over the last two decades for front seat near side occupants in side impacts based on a real world driven working process. The effectiveness of four generations of improved side impact protection are calculated based on data from Volvo’s statistical accident database of Volvo Cars in Sweden. Generation I includes vehicles with a new structural and interior concept (SIPS). Generation II includes vehicles with structural improvements and a new chest airbag (SIPSbag). Generation III includes vehicles with further improved SIPS and SIPSbag as well as the new concept with a head protecting Inflatable Curtain (IC). Generation IV includes the most recent vehicles with further improvements of all the systems plus advanced sensors and seat belt pretensioner activation. Compared to baseline vehicles, vehicles of generation I reduce MAIS2+ injuries by 54%, generation II by 61% and generation III by 72%. For generation IV effectiveness figures cannot be calculated because of the lack of MAIS2+ injuries. A continuous improved performance is also seen when studying the AIS2+ pelvis, abdomen, chest and head injuries separately. By using the same real world driven working process, future improvements and possibly new passive as well as active safety systems, will be developed with the aim of further improved protection to near side occupants in side impacts. PMID:21050597

Neural manufacturing: a novel concept for processing modeling, monitoring, and control

NASA Astrophysics Data System (ADS)

Fu, Chi Y.; Petrich, Loren; Law, Benjamin

1995-09-01

Semiconductor fabrication lines have become extremely costly, and achieving a good return from such a high capital investment requires efficient utilization of these expensive facilities. It is highly desirable to shorten processing development time, increase fabrication yield, enhance flexibility, improve quality, and minimize downtime. We propose that these ends can be achieved by applying recent advances in the areas of artificial neural networks, fuzzy logic, machine learning, and genetic algorithms. We use the term neural manufacturing to describe such applications. This paper describes our use of artificial neural networks to improve the monitoring and control of semiconductor process.

On the asymptotic improvement of supervised learning by utilizing additional unlabeled samples - Normal mixture density case

NASA Technical Reports Server (NTRS)

Shahshahani, Behzad M.; Landgrebe, David A.

1992-01-01

The effect of additional unlabeled samples in improving the supervised learning process is studied in this paper. Three learning processes. supervised, unsupervised, and combined supervised-unsupervised, are compared by studying the asymptotic behavior of the estimates obtained under each process. Upper and lower bounds on the asymptotic covariance matrices are derived. It is shown that under a normal mixture density assumption for the probability density function of the feature space, the combined supervised-unsupervised learning is always superior to the supervised learning in achieving better estimates. Experimental results are provided to verify the theoretical concepts.

Hybrid propulsion technology program: Phase 1. Volume 3: Thiokol Corporation Space Operations

NASA Technical Reports Server (NTRS)

Schuler, A. L.; Wiley, D. R.

1989-01-01

Three candidate hybrid propulsion (HP) concepts were identified, optimized, evaluated, and refined through an iterative process that continually forced improvement to the systems with respect to safety, reliability, cost, and performance criteria. A full scale booster meeting Advanced Solid Rocket Motor (ASRM) thrust-time constraints and a booster application for 1/4 ASRM thrust were evaluated. Trade studies and analyses were performed for each of the motor elements related to SRM technology. Based on trade study results, the optimum HP concept for both full and quarter sized systems was defined. The three candidate hybrid concepts evaluated are illustrated.

Data-intensive drug development in the information age: applications of Systems Biology/Pharmacology/Toxicology.

PubMed

Kiyosawa, Naoki; Manabe, Sunao

2016-01-01

Pharmaceutical companies continuously face challenges to deliver new drugs with true medical value. R&D productivity of drug development projects depends on 1) the value of the drug concept and 2) data and in-depth knowledge that are used rationally to evaluate the drug concept's validity. A model-based data-intensive drug development approach is a key competitive factor used by innovative pharmaceutical companies to reduce information bias and rationally demonstrate the value of drug concepts. Owing to the accumulation of publicly available biomedical information, our understanding of the pathophysiological mechanisms of diseases has developed considerably; it is the basis for identifying the right drug target and creating a drug concept with true medical value. Our understanding of the pathophysiological mechanisms of disease animal models can also be improved; it can thus support rational extrapolation of animal experiment results to clinical settings. The Systems Biology approach, which leverages publicly available transcriptome data, is useful for these purposes. Furthermore, applying Systems Pharmacology enables dynamic simulation of drug responses, from which key research questions to be addressed in the subsequent studies can be adequately informed. Application of Systems Biology/Pharmacology to toxicology research, namely Systems Toxicology, should considerably improve the predictability of drug-induced toxicities in clinical situations that are difficult to predict from conventional preclinical toxicology studies. Systems Biology/Pharmacology/Toxicology models can be continuously improved using iterative learn-confirm processes throughout preclinical and clinical drug discovery and development processes. Successful implementation of data-intensive drug development approaches requires cultivation of an adequate R&D culture to appreciate this approach.

Description of Selected Algorithms and Implementation Details of a Concept-Demonstration Aircraft VOrtex Spacing System (AVOSS)

NASA Technical Reports Server (NTRS)

Hinton, David A.

2001-01-01

A ground-based system has been developed to demonstrate the feasibility of automating the process of collecting relevant weather data, predicting wake vortex behavior from a data base of aircraft, prescribing safe wake vortex spacing criteria, estimating system benefit, and comparing predicted and observed wake vortex behavior. This report describes many of the system algorithms, features, limitations, and lessons learned, as well as suggested system improvements. The system has demonstrated concept feasibility and the potential for airport benefit. Significant opportunities exist however for improved system robustness and optimization. A condensed version of the development lab book is provided along with samples of key input and output file types. This report is intended to document the technical development process and system architecture, and to augment archived internal documents that provide detailed descriptions of software and file formats.

Impact E-Learning Platform Moodle on the Physic's Learning Process in the High School's Students

NASA Astrophysics Data System (ADS)

Torres-Montealban, Jonas; Ruiz-Chavarria, Gregorio; Gomez-Lozoya, Enrique Armando

2011-03-01

As a didactic proposal, moodle e-learning platform was implemented in one of two Physics High School's group at UACH, in order to show how the use of new technologies can improve the learning progress linked to physics concepts. As a result, the first group worked at the same time with inside class activities as well as outside resources from the moodle e-platform. The second group only worked with inside class activities. This teaching application was developed in six sections. Section I defines the educational framework. Section II identifies the key physic's concepts to be studied in each proposed activity. Section III describes the didactic model. Section IV displays the compared results between similarities and differences in both groups. Section VI shows the gathered information in order to be discussed as a topic related on how new technologies improve the Physic's learning process in the high school' students.

Development of expanded extrusion food products for an Advanced Life Support system.

PubMed

Zasypkin, D V; Lee, T C

1999-01-01

Extrusion processing was proposed to provide texture and to expand the variety of cereal food products in an isolated Advanced Life Support (ALS) system. Rice, wheat, and soy are the baseline crops selected for growing during long-term manned space missions. A Brabender single-screw laboratory extruder (model 2003, L/D 20:1), equipped with round nozzles of various lengths, was used as a prototype of a small-size extruder. Several concepts were tested to extend the variety and improve the quality of the products, to decrease environmental loads, and to promote processing stability. These concepts include: the blending of wheat and soybean flour, the extrusion of a coarser rice flour, separation of wheat bran, and optimization of the extruder nozzle design. An optimal nozzle length has been established for the extrusion of rice flour. Bran separating was necessary to improve the quality of wheat extrudates.

Edible packaging materials.

PubMed

Janjarasskul, Theeranun; Krochta, John M

2010-01-01

Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

Similarity and accuracy of mental models formed during nursing handovers: A concept mapping approach.

PubMed

Drach-Zahavy, Anat; Broyer, Chaya; Dagan, Efrat

2017-09-01

Shared mental models are crucial for constructing mutual understanding of the patient's condition during a clinical handover. Yet, scant research, if any, has empirically explored mental models of the parties involved in a clinical handover. This study aimed to examine the similarities among mental models of incoming and outgoing nurses, and to test their accuracy by comparing them with mental models of expert nurses. A cross-sectional study, exploring nurses' mental models via the concept mapping technique. 40 clinical handovers. Data were collected via concept mapping of the incoming, outgoing, and expert nurses' mental models (total of 120 concept maps). Similarity and accuracy for concepts and associations indexes were calculated to compare the different maps. About one fifth of the concepts emerged in both outgoing and incoming nurses' concept maps (concept similarity=23%±10.6). Concept accuracy indexes were 35%±18.8 for incoming and 62%±19.6 for outgoing nurses' maps. Although incoming nurses absorbed fewer number of concepts and associations (23% and 12%, respectively), they partially closed the gap (35% and 22%, respectively) relative to expert nurses' maps. The correlations between concept similarities, and incoming as well as outgoing nurses' concept accuracy, were significant (r=0.43, p<0.01; r=0.68 p<0.01, respectively). Finally, in 90% of the maps, outgoing nurses added information concerning the processes enacted during the shift, beyond the expert nurses' gold standard. Two seemingly contradicting processes in the handover were identified. "Information loss", captured by the low similarity indexes among the mental models of incoming and outgoing nurses; and "information restoration", based on accuracy measures indexes among the mental models of the incoming nurses. Based on mental model theory, we propose possible explanations for these processes and derive implications for how to improve a clinical handover. Copyright © 2017 Elsevier Ltd. All rights reserved.

Task-oriented display design - Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

Task-oriented display design: Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

Public Marketing: An Alternative Policy Decision-Making Idea for Small Cities. Community Development Research Series.

ERIC Educational Resources Information Center

Meyers, James; And Others

The concept of public marketing presents a strategy for the systems approach to community development that would facilitate the community decision making process via improved communication. Basic aspects of the social marketing process include: (1) product policy; (2) channels of distribution; (3) pricing (perceived price vs quality and quantity…

What is a Professor? Learning and Development Volume 9, Number 3.

ERIC Educational Resources Information Center

Geis, George L.; Smith, Ronald A.

A distinction should be made between specific teaching methods (and their improvement) and the more global concept of teacher roles. There are important questions to be answered about how teachers view both the teaching learning process and their contribution to it, as well as how students contribute to this same process. Two men have developed…

Human Factors Principles in Information Dashboard Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques V.; St. Germain, Shawn

When planning for control room upgrades, nuclear power plants have to deal with a multitude of engineering and operational impacts. This will inevitably include several human factors considerations, including physical ergonomics of workstations, viewing angles, lighting, seating, new communication requirements, and new concepts of operation. In helping nuclear power utilities to deal with these challenges, the Idaho National Laboratory (INL) has developed effective methods to manage the various phases of the upgrade life cycle. These methods focus on integrating human factors engineering processes with the plant’s systems engineering process, a large part of which is the development of end-state conceptsmore » for control room modernization. Such an end-state concept is a description of a set of required conditions that define the achievement of the plant’s objectives for the upgrade. Typically, the end-state concept describes the transition of a conventional control room, over time, to a facility that employs advanced digital automation technologies in a way that significantly improves system reliability, reduces human and control room-related hazards, reduces system and component obsolescence, and significantly improves operator performance. To make the various upgrade phases as concrete and as visible as possible, an end-state concept would include a set of visual representations of the control room before and after various upgrade phases to provide the context and a framework within which to consider the various options in the upgrade. This includes the various control systems, human-system interfaces to be replaced, and possible changes to operator workstations. This paper describes how this framework helps to ensure an integrated and cohesive outcome that is consistent with human factors engineering principles and also provide substantial improvement in operator performance. The paper further describes the application of this integrated approach in the strategic modernization program at a nuclear power plant where legacy systems are upgraded to advanced digital technologies through a systematic process that links human factors principles to the systems engineering process. This approach will help to create an integrated control room architecture beyond what is possible for individual subsystem upgrades alone. In addition, several human factors design and evaluation methods were used to develop the end-state concept, including interactive sessions with operators in INL’s Human System Simulation Laboratory, three-dimensional modeling to visualize control board changes.« less

Exploiting metamaterials, plasmonics and nanoantennas concepts in silicon photonics

NASA Astrophysics Data System (ADS)

Rodríguez-Fortuño, Francisco J.; Espinosa-Soria, Alba; Martínez, Alejandro

2016-12-01

The interaction of light with subwavelength metallic nano-structures is at the heart of different current scientific hot topics, namely plasmonics, metamaterials and nanoantennas. Research in these disciplines during the last decade has given rise to new, powerful concepts providing an unprecedented degree of control over light manipulation at the nanoscale. However, only recently have these concepts been used to increase the capabilities of light processing in current photonic integrated circuits (PICs), which traditionally rely only on dielectric materials with element sizes larger than the light wavelength. Amongst the different PIC platforms, silicon photonics is expected to become mainstream, since manufacturing using well-established CMOS processes enables the mass production of low-cost PICs. In this review we discuss the benefits of introducing recent concepts arisen from the fields of metamaterials, plasmonics and nanoantennas into a silicon photonics integrated platform. We review existing works in this direction and discuss how this hybrid approach can lead to the improvement of current PICs enabling novel and disruptive applications in photonics.

Aircraft Icing Weather Data Reporting and Dissemination System

NASA Technical Reports Server (NTRS)

Bass, Ellen J.; Minsk, Brian; Lindholm, Tenny; Politovich, Marcia; Reehorst, Andrew (Technical Monitor)

2002-01-01

The long-term operational concept of this research is to develop an onboard aircraft system that assesses and reports atmospheric icing conditions automatically and in a timely manner in order to improve aviation safety and the efficiency of aircraft operations via improved real-time and forecast weather products. The idea is to use current measurement capabilities on aircraft equipped with icing sensors and in-flight data communication technologies as a reporting source. Without requiring expensive avionics upgrades, aircraft data must be processed and available for downlink. Ideally, the data from multiple aircraft can then be integrated (along with other real-time and modeled data) on the ground such that aviation-centered icing hazard metrics for volumes of airspace can be assessed. As the effect of icing on different aircraft types can vary, the information should be displayed in meaningful ways such that multiple types of users can understand the information. That is, information must be presented in a manner to allow users to understand the icing conditions with respect to individual concerns and aircraft capabilities. This research provides progress toward this operational concept by: identifying an aircraft platform capable of digitally capturing, processing, and downlinking icing data; identifying the required in situ icing data processing; investigating the requirements for routing the icing data for use by weather products; developing an icing case study in order to gain insight into major air carrier needs; developing and prototyping icing display concepts based on the National Center for Atmospheric Research's existing diagnostic and forecast experimental icing products; and conducting a usability study for the prototyped icing display concepts.

Lean thinking in emergency departments: concepts and tools for quality improvement.

PubMed

Bruno, Frances

2017-10-12

The lean approach is a viable framework for reducing costs and enhancing the quality of patient care in emergency departments (EDs). Reports on lean-inspired quality improvement initiatives are rapidly growing but there is little emphasis on the philosophy behind the processes, which is the essential ingredient in sustaining transformation. This article describes lean philosophy, also referred to as lean, lean thinking and lean healthcare, and its main concepts, to enrich the knowledge and vocabulary of nurses involved or interested in quality improvement in EDs. The article includes examples of lean strategies to illustrate their practical application in EDs. ©2012 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

[Neurogenesis in the adult brain: the demise of a dogma and the advent of new treatments].

PubMed

Crespel, A; Baldy-Moulinier, M; Lerner Natoli, M

2004-12-01

Since the early sixties, many concepts concerning neurogenesis have been progressively ruled out. Proof of the persistence of a physiological neurogenesis in adult mammals, including humans, raised the concept of a unique precursor cell giving birth to neurons and glial cells. According to this concept, a real continuum between neuroepithelial cells, radial glia and astrocytes exists from the embryonic period to adult age and generates both neurons and glial cells. Different factors, either secreted in situ or transported by blood, can influence this physiological neurogenesis process. The targets and role of newborn neurons are not clearly understood. In pathological conditions (ischemia, epilepsy, lesions), the physiological neurogenesis process is enhanced; however the significance of this neurogenesis excess (beneficial or deleterious) is not completely known. Advances in understanding the regulation of neurogenesis in these different conditions represent hopes of new therapeutic procedures, not only by improving the control of differentiation and survival of transplanted stem cells, but also by the possibility of modifying the processes of "endogenous neurogenesis".

Transforming the patient care environment with Lean Six Sigma and realistic evaluation.

PubMed

Black, Jason

2009-01-01

Lean Six Sigma (LSS) is a structured methodology for transforming processes, but it does not fully consider the complex social interactions that cause processes to form in hospital organizations. By combining LSS implementations with the concept of Realistic Evaluation, a methodology that promotes change by assessing and considering the individual characteristics of an organization's social environment, successful and sustainable process improvement is more likely.

Limits of acceptable change and natural resources planning: when is LAC useful, when is it not?

Treesearch

David N. Cole; Stephen F. McCool

1997-01-01

There are ways to improve the LAC process and its implementational procedures. One significant procedural modification is the addition of a new step. This step — which becomes the first step in the process — involves more explicitly defining goals and desired conditions. For other steps in the process, clarifications of concept and terminology are advanced, as are...

Validation of multisource electronic health record data: an application to blood transfusion data.

PubMed

Hoeven, Loan R van; Bruijne, Martine C de; Kemper, Peter F; Koopman, Maria M W; Rondeel, Jan M M; Leyte, Anja; Koffijberg, Hendrik; Janssen, Mart P; Roes, Kit C B

2017-07-14

Although data from electronic health records (EHR) are often used for research purposes, systematic validation of these data prior to their use is not standard practice. Existing validation frameworks discuss validity concepts without translating these into practical implementation steps or addressing the potential influence of linking multiple sources. Therefore we developed a practical approach for validating routinely collected data from multiple sources and to apply it to a blood transfusion data warehouse to evaluate the usability in practice. The approach consists of identifying existing validation frameworks for EHR data or linked data, selecting validity concepts from these frameworks and establishing quantifiable validity outcomes for each concept. The approach distinguishes external validation concepts (e.g. concordance with external reports, previous literature and expert feedback) and internal consistency concepts which use expected associations within the dataset itself (e.g. completeness, uniformity and plausibility). In an example case, the selected concepts were applied to a transfusion dataset and specified in more detail. Application of the approach to a transfusion dataset resulted in a structured overview of data validity aspects. This allowed improvement of these aspects through further processing of the data and in some cases adjustment of the data extraction. For example, the proportion of transfused products that could not be linked to the corresponding issued products initially was 2.2% but could be improved by adjusting data extraction criteria to 0.17%. This stepwise approach for validating linked multisource data provides a basis for evaluating data quality and enhancing interpretation. When the process of data validation is adopted more broadly, this contributes to increased transparency and greater reliability of research based on routinely collected electronic health records.

Transportation Service Center Analysis Using GIS Technology

DOT National Transportation Integrated Search

1997-01-01

The Transportation Service Center (TSC) concept originated as a result of the department's evaluation of its key business processes and its commitment to improve the quality of the goods and services it provides. TSCs are local Michigan Department of...

Improving building performance using smart building concept: Benefit cost ratio comparison

NASA Astrophysics Data System (ADS)

Berawi, Mohammed Ali; Miraj, Perdana; Sayuti, Mustika Sari; Berawi, Abdur Rohim Boy

2017-11-01

Smart building concept is an implementation of technology developed in the construction industry throughout the world. However, the implementation of this concept is still below expectations due to various obstacles such as higher initial cost than a conventional concept and existing regulation siding with the lowest cost in the tender process. This research aims to develop intelligent building concept using value engineering approach to obtain added value regarding quality, efficiency, and innovation. The research combined quantitative and qualitative approach using questionnaire survey and value engineering method to achieve the research objectives. The research output will show additional functions regarding technology innovation that may increase the value of a building. This study shows that smart building concept requires higher initial cost, but produces lower operational and maintenance costs. Furthermore, it also confirms that benefit-cost ratio on the smart building was much higher than a conventional building, that is 1.99 to 0.88.

The Use of Novel Camtasia Videos to Improve Performance of At-Risk Students in Undergraduate Physiology Courses

ERIC Educational Resources Information Center

Miller, Cynthia J.

2014-01-01

Students in undergraduate physiology courses often have difficulty understanding complex, multi-step processes, and these concepts consume a large portion of class time. For this pilot study, it was hypothesized that online multimedia resources may improve student performance in a high-risk population and reduce the in-class workload. A narrated…

Fabrication of titanium thermal protection system panels by the NOR-Ti-bond process

NASA Technical Reports Server (NTRS)

Wells, R. R.

1971-01-01

A method for fabricating titanium thermal protection system panels is described. The method has the potential for producing wide faying surface bonds to minimize temperature gradients and thermal stresses resulting during service at elevated temperatures. Results of nondestructive tests of the panels are presented. Concepts for improving the panel quality and for improved economy in production are discussed.

Total Quality Management, DLA Finance Center

DTIC Science & Technology

1989-07-01

ton. DC 20503. DATE 3. REPORT TYPE AND DATES COVERED SJuly 1989 4. TITLE AND SUBTIT’LE 5. FUNDING NUMBERS Total Quality Management , DLA Finance Center 6...1989 ~ D 14. SUBJECT TERMS 15. NUMBER OF PAGES TQM (Total Quality Management ), Continuous Process Improvement. ., I Management 16. PRICE CODE 17...CONCEPTS TQM BASICS Total Quality Management (TQM) is a concept which is based on the work of a variety of people in a variety of fields. It includes

Facilitating the Information Exchange Using a Modular Electronic Discharge Summary.

PubMed

Denecke, Kerstin; Dittli, Pascal A; Kanagarasa, Niveadha; Nüssli, Stephan

2018-01-01

Discharge summaries are a standard communication tool delivering important clinical information from inpatient to ambulatory care. To ensure a high quality, correctness and completeness, the generation process is time consuming. It requires also contributions of multiple persons. This is problematic since the primary care provider needs the information from the discharge summary for continuing the intended treatment. To address this challenge, we developed a concept for exchanging a modular electronic discharge summary. Through a literature review and interviews with multiple stakeholders, we analysed existing processes and derived requirements for an improved communication of the discharge summary. In this paper, we suggest a concept of a modular electronic discharge summary that is exchanged through the electronic patient dossier in CDA CH level 2 documents. Until 2020, all Swiss hospitals are obliged to connect to the electronic patient dossier. Our concept allows to access already completed modules of the discharge summary from the primary care side, before the entire report is entirely finalised. The data is automatically merged with the local patient record on the physician side and prepared for data integration into the practice information system. Our concept offers the opportunity not only to improve the information exchange between hospital and primary care, but it also provides a potential use case and demonstrates a benefit of the electronic patient dossier for primary care providers who are so far not obliged to connect to the patient dossier in Switzerland.

[Social Cognition and its Contribution to the Rehabilitation of Behavioural Disorders in Traumatic Brain Injury].

PubMed

Quemada, José Ignacio; Rusu, Olga; Fonseca, Paola

2017-10-01

Social behaviour disorders in traumatic brain injury are caused by the dysfunction of cognitive processes involved in social and interpersonal interaction. The concept of social cognition was introduced by authors studying schizophrenia, autism or mental retardation. The boundaries and the content of the concept have not yet been definitively defined, but theory of mind, empathy and emotional processing are included in all the models proposed. The strategies proposed to improve social behaviour focus on the restoration of cognitive processes such as working memory, emotional recognition and processing, and empathy, as well as social skills. To date, there is very little evidence on the efficacy of the aforementioned social cognition strategies. Copyright © 2017 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Sustainable improvement of animal health care by systematic quality risk management according to the HACCP concept.

PubMed

Noordhuizen, J P; Welpelo, H J

1996-12-01

This paper addresses the principles of the Hazard Analysis Critical Control Point (HACCP) concept as applied to animal health management strategy. Characteristics of the concept were analysed and compared with those of current animal health care strategies for disease risk identification and herd health management, insurance, and certification. HACCP is a hybrid strategy of quality control at both production process and product level. Animal health is considered a particular quality feature. We show that process control (expressed in terms of controlling both general and specific disease risk factors) and product control (expressed in terms of testing animals or animal products for specific disease agents) could form the basis for improving animal health. We conclude that HACCP provides ample opportunity for preventive health action and risk management at a relatively low cost in terms of labour, finance and documentation expenditure, at both the farm and sector level. Epidemiological field studies are currently needed to identify critical control points and to design HACCP procedures for livestock producers. In the long run, HACCP based animal health care can be further developed into a quality control systems approach to cover all aspects that are related, either directly or indirectly, to animal health.

Neurolinguistic Approach to Natural Language Processing with Applications to Medical Text Analysis

PubMed Central

Matykiewicz, Paweł; Pestian, John

2008-01-01

Understanding written or spoken language presumably involves spreading neural activation in the brain. This process may be approximated by spreading activation in semantic networks, providing enhanced representations that involve concepts that are not found directly in the text. Approximation of this process is of great practical and theoretical interest. Although activations of neural circuits involved in representation of words rapidly change in time snapshots of these activations spreading through associative networks may be captured in a vector model. Concepts of similar type activate larger clusters of neurons, priming areas in the left and right hemisphere. Analysis of recent brain imaging experiments shows the importance of the right hemisphere non-verbal clusterization. Medical ontologies enable development of a large-scale practical algorithm to re-create pathways of spreading neural activations. First concepts of specific semantic type are identified in the text, and then all related concepts of the same type are added to the text, providing expanded representations. To avoid rapid growth of the extended feature space after each step only the most useful features that increase document clusterization are retained. Short hospital discharge summaries are used to illustrate how this process works on a real, very noisy data. Expanded texts show significantly improved clustering and may be classified with much higher accuracy. Although better approximations to the spreading of neural activations may be devised a practical approach presented in this paper helps to discover pathways used by the brain to process specific concepts, and may be used in large-scale applications. PMID:18614334

A candidate concept for display of forward-looking wind shear information

NASA Technical Reports Server (NTRS)

Hinton, David A.

1989-01-01

A concept is proposed which integrates forward-look wind shear information with airplane performance capabilities to predict future airplane energy state as a function of range. The information could be displayed to a crew either in terms of energy height or airspeed deviations. The anticipated benefits of the proposed display information concept are: (1) a wind shear hazard product that scales directly to the performance impact on the airplane and that has intuitive meaning to flight crews; (2) a reduction in flight crew workload by automatic processing of relevant hazard parameters; and (3) a continuous display of predicted airplane energy state if the approach is continued. Such a display may be used to improve pilot situational awareness or improve pilot confidence in wind shear alerts generated by other systems. The display is described and the algorithms necessary for implementation in a simulation system are provided.

The risk concept and its application in natural hazard risk management in Switzerland

NASA Astrophysics Data System (ADS)

Bründl, M.; Romang, H. E.; Bischof, N.; Rheinberger, C. M.

2009-05-01

Over the last ten years, a risk-based approach to manage natural hazards - termed the risk concept - has been introduced to the management of natural hazards in Switzerland. Large natural hazard events, new political initiatives and limited financial resources have led to the development and introduction of new planning instruments and software tools that should support natural hazard engineers and planners to effectively and efficiently deal with natural hazards. Our experience with these new instruments suggests an improved integration of the risk concept into the community of natural hazard engineers and planners. Important factors for the acceptance of these new instruments are the integration of end-users during the development process, the knowledge exchange between science, developers and end-users as well as training and education courses for users. Further improvements require the maintenance of this knowledge exchange and a mindful adaptation of the instruments to case-specific circumstances.

A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

2007-01-01

A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.

Laser processes and system technology for the production of high-efficient crystalline solar cells

NASA Astrophysics Data System (ADS)

Mayerhofer, R.; Hendel, R.; Zhu, Wenjie; Geiger, S.

2012-10-01

The laser as an industrial tool is an essential part of today's solar cell production. Due to the on-going efforts in the solar industry, to increase the cell efficiency, more and more laser-based processes, which have been discussed and tested at lab-scale for many years, are now being implemented in mass production lines. In order to cope with throughput requirements, standard laser concepts have to be improved continuously with respect to available average power levels, repetition rates or beam profile. Some of the laser concepts, that showed high potential in the past couple of years, will be substituted by other, more economic laser types. Furthermore, requirements for processing with less-heat affected zones fuel the development of industry-ready ultra short pulsed lasers with pulse widths even below the picosecond range. In 2011, the German Ministry of Education and Research (BMBF) had launched the program "PV-Innovation Alliance", with the aim to support the rapid transfer of high-efficiency processes out of development departments and research institutes into solar cell production lines. Here, lasers play an important role as production tools, allowing the fast implementation of high-performance solar cell concepts. We will report on the results achieved within the joint project FUTUREFAB, where efficiency optimization, throughput enhancement and cost reduction are the main goals. Here, the presentation will focus on laser processes like selective emitter doping and ablation of dielectric layers. An indispensable part of the efforts towards cost reduction in solar cell production is the improvement of wafer handling and throughput capabilities of the laser processing system. Therefore, the presentation will also elaborate on new developments in the design of complete production machines.

Combination of inquiry learning model and computer simulation to improve mastery concept and the correlation with critical thinking skills (CTS)

NASA Astrophysics Data System (ADS)

Nugraha, Muhamad Gina; Kaniawati, Ida; Rusdiana, Dadi; Kirana, Kartika Hajar

2016-02-01

Among the purposes of physics learning at high school is to master the physics concepts and cultivate scientific attitude (including critical attitude), develop inductive and deductive reasoning skills. According to Ennis et al., inductive and deductive reasoning skills are part of critical thinking. Based on preliminary studies, both of the competence are lack achieved, it is seen from student learning outcomes is low and learning processes that are not conducive to cultivate critical thinking (teacher-centered learning). One of learning model that predicted can increase mastery concepts and train CTS is inquiry learning model aided computer simulations. In this model, students were given the opportunity to be actively involved in the experiment and also get a good explanation with the computer simulations. From research with randomized control group pretest-posttest design, we found that the inquiry learning model aided computer simulations can significantly improve students' mastery concepts than the conventional (teacher-centered) method. With inquiry learning model aided computer simulations, 20% of students have high CTS, 63.3% were medium and 16.7% were low. CTS greatly contribute to the students' mastery concept with a correlation coefficient of 0.697 and quite contribute to the enhancement mastery concept with a correlation coefficient of 0.603.

[Metacognition in psychotic disorders: from concepts to intervention].

PubMed

de Jong, S; van Donkersgoed, R J M; Arends, J; Lysaker, P H; Wunderink, L; van der Gaag, M; Aleman, A; Pijnenborg, G H M

2016-01-01

Persons with a psychotic disorder commonly experience difficulties with what is considered to be metacognitive capacity. In this article we discuss several definitions of this concept, the measurement instruments involved and the clinical interventions that target this concept. To present a review of various frequently used definitions of metacognition and related concepts and to describe the measurement instruments involved and the treatment options available for improving the metacognitive capacity of persons with a psychotic disorder. We present an overview of several definitions of metacognition in psychotic disorders and we discuss frequently used measurement instruments and treatment options. The article focuses on recent developments in a model devised by Semerari et al. The measurement instrument involved (Metacognition Assessment Scale - A) is discussed in terms of it being an addition to existing methods. On the basis of the literature it appears that metacognition and related concepts are measurable constructs, although definitions and instruments vary considerably. The new conceptualisation of social information processing also leads to the development of a new form of psychotherapy that aims to help patients suffering from psychotic disorders to improve metacognitive capacity. There seems to be evidence that metacognitive abilities are a possible target for treatment, but further research is needed.

Unraveling the meaning of patient engagement: A concept analysis.

PubMed

Higgins, Tracy; Larson, Elaine; Schnall, Rebecca

2017-01-01

Patient engagement has been credited with contributing to improved outcomes and experiences of care. Patient engagement has become a widely used term, but remains a poorly understood concept in healthcare. Citations for the term have increased throughout the healthcare-related disciplines without a common definition. This study seeks to define the concept by identifying its attributes in the context of its use. A concept analysis of the scientific literature in the health disciplines was performed using the Rogers method. The analysis revealed four defining attributes of patient engagement: personalization, access, commitment and therapeutic alliance. Patient engagement is defined as the desire and capability to actively choose to participate in care in a way uniquely appropriate to the individual, in cooperation with a healthcare provider or institution, for the purposes of maximizing outcomes or improving experiences of care. Patient engagement is both process and behavior and is shaped by the relationship between the patient and provider and the environment in which healthcare delivery takes place. The definition and the identified attributes serve as a heuristic in designing patient engagement strategies and as a basis for future development of the patient engagement concept in healthcare. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

A concept taxonomy and an instrument hierarchy: tools for establishing and evaluating the conceptual framework of a patient-reported outcome (PRO) instrument as applied to product labeling claims.

PubMed

Erickson, Pennifer; Willke, Richard; Burke, Laurie

2009-01-01

To facilitate development and evaluation of a PRO instrument conceptual framework, we propose two tools--a PRO concept taxonomy and a PRO instrument hierarchy. FDA's draft guidance on patient reported outcome (PRO) measures states that a clear description of the conceptual framework of an instrument is useful for evaluating its adequacy to support a treatment benefit claim for use in product labeling the draft guidance, however does not propose tools for establishing or evaluating a PRO instrument's conceptual framework. We draw from our review of PRO concepts and instruments that appear in prescription drug labeling approved in the United States from 1997 to 2007. We propose taxonomy terms that define relationships between PRO concepts, including "family,"compound concept," and "singular concept." Based on the range of complexity represented by the concepts, as defined by the taxonomy, we propose nine instrument orders for PRO measurement. The nine orders range from individual event counts to multi-item, multiscale instruments. This analysis of PRO concepts and instruments illustrates that the taxonomy and hierarchy are applicable to PRO concepts across a wide range of therapeutic areas and provide a basis for defining the instrument conceptual framework complexity. Although the utility of these tools in the drug development, review, and approval processes has not yet been demonstrated, these tools could be useful to improve communication and enhance efficiency in the instrument development and review process.

A concept analysis of compassionate midwifery.

PubMed

Ménage, Diane; Bailey, Elizabeth; Lees, Susan; Coad, Jane

2017-03-01

To report a concept analysis of compassionate midwifery. Recently, compassion has been incorporated into United Kingdom nursing and midwifery language through strategy, policy, recruitment and education. Professional standards direct midwives to practise compassionately therefore the concept of compassionate midwifery exists, although this has yet to be explored as a concept in the UK or internationally. An understanding of what constitutes compassionate midwifery has the potential to increase midwifery knowledge and improve practice. Concept Analysis. Literature from 1990-2015 was searched using MEDLINE, CINAHL, PsycINFO and ETHOS. Grey literature and examples of everyday usage of the concept were searched using Google. An adapted model of evolutionary concept analysis. Explanations of compassionate midwifery were absent in the literature therefore the gathered data were evaluated in relation to elements of the compassion process: recognition of suffering, emotion, motivation and action. Compassionate midwifery is defined as the interrelations of authentic presence, noticing suffering, empathy, connectedness/relationship, emotion work, motivation to help/support, empowering women and alleviating suffering through negotiation, knowledge and skills. Antecedents and consequences were also identified and depicted in a schematic representation of the concept. This concept analysis provides a unique examination of compassionate midwifery and starting point for reflection on practice, education and further analysis. Empirical studies will provide the potential to take the process further by studying the experience of compassionate midwifery from different perspectives. A theory of compassionate midwifery will develop as new findings emerge. © 2016 John Wiley & Sons Ltd.

MoonBEAM: A Beyond Earth-Orbit Gamma-Ray Burst Detector for Gravitational-Wave Astronomy

NASA Technical Reports Server (NTRS)

Hui, C. M.; Briggs, M. S.; Goldstein, A. M.; Jenke, P. A.; Kocevski, D.; Wilson-Hodge, C. A.

2018-01-01

Moon Burst Energetics All-sky Monitor (MoonBEAM) is a CubeSat concept of deploying gamma-ray detectors in cislunar space to improve localization precision for gamma-ray bursts by utilizing the light travel time difference between different orbits. We present here a gamma-ray SmallSat concept in Earth-Moon L3 halo orbit that is capable of rapid response and provide a timing baseline for localization improvement when partnered with an Earth-orbit instrument. Such an instrument would probe the extreme processes in cosmic collision of compact objects and facilitate multi-messenger time-domain astronomy to explore the end of stellar life cycles and black hole formations.

Implementing benchmarking recommendations in the Offices of Construction for the Iowa DOT

DOT National Transportation Integrated Search

1998-01-01

The Iowa DOT's Offices of Construction are seeking ways to use benchmarking, the concepts of quality management, and outside facilitation to improve their methods and processes. Iowa State University researchers and the Offices of Construction Benchm...

Students' Conceptions of Glaciers and Ice Ages: Applying the Model of Educational Reconstruction to Improve Learning

ERIC Educational Resources Information Center

Felzmann, Dirk

2017-01-01

Glaciers and ice ages are important topics in teaching geomorphology, earth history, and climate change. As with many geoscience topics, glacier formation, glacier movement, glacial morphology, and ice ages consist of a wide variety of processes and phenomena. Accordingly, it must be decided which of those processes and phenomena should be part of…

Reducing Content Variance and Improving Student Learning Outcomes: The Value of Standardization in a Multisection Course

ERIC Educational Resources Information Center

Meuter, Matthew L.; Chapman, Kenneth J.; Toy, Daniel; Wright, Lauren K.; McGowan, William

2009-01-01

This article describes a standardization process for an introductory marketing course with multiple sections. The authors first outline the process used to develop a standardized set of marketing concepts to be used in all introductory marketing classes. They then discuss the benefits to both students and faculty that occur as a result of…

Fast Adapting Ensemble: A New Algorithm for Mining Data Streams with Concept Drift

PubMed Central

Ortíz Díaz, Agustín; Ramos-Jiménez, Gonzalo; Frías Blanco, Isvani; Caballero Mota, Yailé; Morales-Bueno, Rafael

2015-01-01

The treatment of large data streams in the presence of concept drifts is one of the main challenges in the field of data mining, particularly when the algorithms have to deal with concepts that disappear and then reappear. This paper presents a new algorithm, called Fast Adapting Ensemble (FAE), which adapts very quickly to both abrupt and gradual concept drifts, and has been specifically designed to deal with recurring concepts. FAE processes the learning examples in blocks of the same size, but it does not have to wait for the batch to be complete in order to adapt its base classification mechanism. FAE incorporates a drift detector to improve the handling of abrupt concept drifts and stores a set of inactive classifiers that represent old concepts, which are activated very quickly when these concepts reappear. We compare our new algorithm with various well-known learning algorithms, taking into account, common benchmark datasets. The experiments show promising results from the proposed algorithm (regarding accuracy and runtime), handling different types of concept drifts. PMID:25879051

Radiant thinking and the use of the mind map in nurse practitioner education.

PubMed

Spencer, Julie R; Anderson, Kelley M; Ellis, Kathryn K

2013-05-01

The concept of radiant thinking, which led to the concept of mind mapping, promotes all aspects of the brain working in synergy, with thought beginning from a central point. The mind map, which is a graphical technique to improve creative thinking and knowledge attainment, utilizes colors, images, codes, and dimensions to amplify and enhance key ideas. This technique augments the visualization of relationships and links between concepts, which aids in information acquisition, data retention, and overall comprehension. Faculty can promote students' use of the technique for brainstorming, organizing ideas, taking notes, learning collaboratively, presenting, and studying. These applications can be used in problem-based learning, developing plans of care, health promotion activities, synthesizing disease processes, and forming differential diagnoses. Mind mapping is a creative way for students to engage in a unique method of learning that can expand memory recall and help create a new environment for processing information. Copyright 2013, SLACK Incorporated.

Automated ammunition logistics for the Crusader program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speaks, D.M.; Kring, C.T.; Lloyd, P.D.

1997-03-01

The US Army`s next generation artillery system is called the Crusader. A self-propelled howitzer and a resupply vehicle constitute the Crusader system, which will be designed for improved mobility, increased firepower, and greater survivability than current generation vehicles. The Army`s Project Manager, Crusader, gave Oak Ridge National Laboratory (ORNL) the task of developing and demonstrating a concept for the resupply vehicle. The resupply vehicle is intended to sustain the howitzer with ammunition and fuel and will significantly increase capabilities over those of current resupply vehicles. Ammunition is currently processed and transferred almost entirely by hand. ORNL identified and evaluated variousmore » concepts for automated upload, processing, storage, docking and delivery. Each of the critical technologies was then developed separately and demonstrated on discrete test platforms. An integrated technology demonstrator, incorporating each of the individual technology components to realistically simulate performance of the selected vehicle concept, was developed and successfully demonstrated for the Army.« less

A Task Analytic Process to Define Future Concepts in Aviation

NASA Technical Reports Server (NTRS)

Gore, Brian Francis; Wolter, Cynthia A.

2014-01-01

A necessary step when developing next generation systems is to understand the tasks that operators will perform. One NextGen concept under evaluation termed Single Pilot Operations (SPO) is designed to improve the efficiency of airline operations. One SPO concept includes a Pilot on Board (PoB), a Ground Station Operator (GSO), and automation. A number of procedural changes are likely to result when such changes in roles and responsibilities are undertaken. Automation is expected to relieve the PoB and GSO of some tasks (e.g. radio frequency changes, loading expected arrival information). A major difference in the SPO environment is the shift to communication-cued crosschecks (verbal / automated) rather than movement-cued crosschecks that occur in a shared cockpit. The current article highlights a task analytic process of the roles and responsibilities between a PoB, an approach-phase GSO, and automation.

An ethical framework for the responsible leadership of accountable care organizations.

PubMed

McCullough, Laurence B

2012-01-01

Using the ethical concepts of co-fiduciary responsibility in patient care and of preventive ethics, this article provides an ethical framework to guide physician and lay leaders of accountable care organizations. The concept of co-fiduciary responsibility is based on the ethical concept of medicine as a profession, which was introduced into the history of medical ethics in the 18th century. Co-fiduciary responsibility applies to everyone who influences the processes of patient care: physicians, organizational leaders, patients, and patients' surrogates. A preventive ethics approach to co-fiduciary responsibility requires leaders of accountable care organizations to create organizational cultures of fiduciary professionalism that implement and support the following: improving quality based on candor and accountability, reasserting the physician's professional role in the informed consent process, and constraining patients' and surrogates' autonomy. Sustainable organizational cultures of fiduciary professionalism will require commitment of organizational resources and constant vigilance over the intellectual and moral integrity of organizational culture.

Workplace Challenges: The Impact of Personal Beliefs and the Birth Environment.

PubMed

Adams, Ellise D

This article reviews 2 workplace challenges faced by the perinatal nurse: the impact of personal beliefs and issues within the birth environment. It also explores how these challenges inform the birth practices of the perinatal nurse. The methods employed for this review are focus groups and a concept analysis. Two focus groups (n = 14) and a concept analysis based on a process defined by Walker and Avant provided a set of birth practices performed by the perinatal nurse who facilitates normal birth. Assertiveness was identified as a primary attribute of the perinatal nurse and several suggestions are identified as empirical referents or methods of measuring the abstract concepts, to identify the workplace challenges of the perinatal nurse. Development of effective processes, designed to overcome the many challenges facing the perinatal nurse, will assist in improving perinatal care for women and newborns.

Development of optimized, graded-permeability axial groove heat pipes

NASA Technical Reports Server (NTRS)

Kapolnek, Michael R.; Holmes, H. Rolland

1988-01-01

Heat pipe performance can usually be improved by uniformly varying or grading wick permeability from end to end. A unique and cost effective method for grading the permeability of an axial groove heat pipe is described - selective chemical etching of the pipe casing. This method was developed and demonstrated on a proof-of-concept test article. The process improved the test article's performance by 50 percent. Further improvement is possible through the use of optimally etched grooves.

The effects of Roundhouse diagram construction and use on meaningful science learning in the middle school classroom

NASA Astrophysics Data System (ADS)

Ward, Robin Eichel

This research explored the effects of Roundhouse diagram construction and use on meaningful learning of science concepts in a 6th-grade science classroom. This investigation examined the transformation of students' science concepts as they became more proficient in constructing Roundhouse diagrams, what problems students encountered while constructing Roundhouse diagrams, and how choices of iconic images affected their progress in meaningfully learning science concepts as they constructed a series of Roundhouse diagrams. The process of constructing a Roundhouse diagram involved recognizing the learner's relevant existing concepts, evaluating the central concepts for a science lesson and breaking them down into their component parts, reconstructing the learner's conceptual framework by reducing the amount of detail efficiently, reviewing the reconstruction process, and linking each key concept to an iconic image. The researcher collected and analyzed qualitative and quantitative data to determine the effectiveness of the Roundhouse diagram. Data included field notes, observations, students' responses to Roundhouse diagram worksheets, students' perceptions from evaluation sheets, students' mastery of technique sheets, tapes and transcripts of students' interviews, student-constructed Roundhouse diagrams, and documentation of science grades both pre- and post-Roundhouse diagramming. This multiple case study focused on six students although the whole class was used for statistical purposes. Stratified purposeful sampling was used to facilitate comparisons as well as week-by-week comparisons of students' science grades and Roundhouse diagram scores to gain additional insight into the effectiveness of the Roundhouse diagramming method. Through participation in constructing a series of Roundhouse diagrams, middle school students gained a greater understanding of science concepts. Roundhouse diagram scores improved over time during the 10-week Roundhouse diagramming session. Students' science scores improved as they became more proficient in constructing the Roundhouse diagrams. The major problems associated with constructing Roundhouse diagrams were extracting the main ideas from the textbook, understanding science concepts in terms of whole/part relationships, paraphrasing sentences effectively, and sequencing events in an accurate order. A positive relationship existed for the case study group based on students' choices and drawings of iconic images and the meaningful learning of science concepts.

Clinical operations management in radiology.

PubMed

Ondategui-Parra, Silvia; Gill, Ileana E; Bhagwat, Jui G; Intrieri, Lisa A; Gogate, Adheet; Zou, Kelly H; Nathanson, Eric; Seltzer, Steven E; Ros, Pablo R

2004-09-01

Providing radiology services is a complex and technically demanding enterprise in which the application of operations management (OM) tools can play a substantial role in process management and improvement. This paper considers the benefits of an OM process in a radiology setting. Available techniques and concepts of OM are addressed, along with gains and benefits that can be derived from these processes. A reference framework for the radiology processes is described, distinguishing two phases in the initial assessment of a unit: the diagnostic phase and the redesign phase.

Concept mapping to improve team work, team learning and care of the person with dementia and behavioural and psychological symptoms.

PubMed

Aberdeen, Suzanne M; Byrne, Graeme

2018-04-01

The incidence of behavioural and psychological symptoms of dementia in residential aged care facilities is high. Effective team work and knowledgeable staff are cited as important facilitators of appropriate care responses to clients with these symptoms, but to achieve this within a resource-poor workplace can be challenging. In the study reported in this paper, concept mapping was trialled to enhance multifocal person-centred assessment and care planning as well as team learning. The outcomes of team concept mapping were evaluated using a quasi-experimental design with pre- and post-testing in 11 selected Australian residential aged care facilities , including two control residential aged care facilities , over a nine-month period. It was demonstrated that use of concept mapping improved team function, measured as effectiveness of care planning, as well as enhancing learning, with increased knowledge of dementia care even amongst staff who were not directly involved with the process. It is suggested that these results may be generalizable to other countries and care settings.

Collaborating across organizational boundaries to improve the quality of care.

PubMed

Plsek, P E

1997-04-01

The paradigm of modern quality management is in wide use in health care. Although much of the initial effort in health care has focused on improving service, administrative, and support processes, many organizations are also using these concepts to improve clinical care. The analysis of data on clinical outcomes has undoubtedly led to many local improvements, but such analysis is inevitably limited by three issues: small samples, lack of detailed knowledge of what others are doing, and paradigm paralysis. These issues can be partially overcome when multiple health care organizations work together on focused clinical quality improvement efforts. Through the use of multiorganizational collaborative groups, literature reviews, expert panels, best-practice conferences, multiorganizational databases, and bench-marking groups, organizations can effectively pool data and learn from the many natural experiments constantly underway in the health care community. This article outlines the key concepts behind such collaborative improvement efforts and describes pioneering work in the application of these techniques in health care. A better understanding and wider use of collaborative improvement efforts may lead to dramatic breakthroughs in clinical outcomes in the coming years.

Low NO sub x heavy fuel combustor concept program

NASA Technical Reports Server (NTRS)

Russell, P.; Beal, G.; Hinton, B.

1981-01-01

A gas turbine technology program to improve and optimize the staged rich lean low NOx combustor concept is described. Subscale combustor tests to develop the design information for optimization of the fuel preparation, rich burn, quick air quench, and lean burn steps of the combustion process were run. The program provides information for the design of high pressure full scale gas turbine combustors capable of providing environmentally clean combustion of minimally of minimally processed and synthetic fuels. It is concluded that liquid fuel atomization and mixing, rich zone stoichiometry, rich zone liner cooling, rich zone residence time, and quench zone stoichiometry are important considerations in the design and scale up of the rich lean combustor.

Robot graphic simulation testbed

NASA Technical Reports Server (NTRS)

Cook, George E.; Sztipanovits, Janos; Biegl, Csaba; Karsai, Gabor; Springfield, James F.

1991-01-01

The objective of this research was twofold. First, the basic capabilities of ROBOSIM (graphical simulation system) were improved and extended by taking advantage of advanced graphic workstation technology and artificial intelligence programming techniques. Second, the scope of the graphic simulation testbed was extended to include general problems of Space Station automation. Hardware support for 3-D graphics and high processing performance make high resolution solid modeling, collision detection, and simulation of structural dynamics computationally feasible. The Space Station is a complex system with many interacting subsystems. Design and testing of automation concepts demand modeling of the affected processes, their interactions, and that of the proposed control systems. The automation testbed was designed to facilitate studies in Space Station automation concepts.

Argument Based Science Inquiry (ABSI) Learning Model in Voltaic Cell Concept

NASA Astrophysics Data System (ADS)

Subarkah, C. Z.; Fadilah, A.; Aisyah, R.

2017-09-01

Voltaic Cell is a sub-concept of electrochemistry that is considered difficult to be comprehended by learners Voltaic Cell is a sub concept of electrochemistry that is considered difficult to be understood by learners so that impacts on student activity in learning process. Therefore the learning model Argument Based Science Inquiry (ABSI) will be applied to the concept of Voltaic cell. This research aims to describe students’ activities during learning process using ABSI model and to analyze students’ competency to solve ABSI-based worksheets (LK) of Voltaic Cell concept. The method used in this research was the “mix-method-quantitative-embedded” method with subjects of the study: 39 second-semester students of Chemistry Education study program. The student activity is quite good during ABSI learning. The students’ ability to complete worksheet (LK) for every average phase is good. In the phase of exploration of post instruction understanding, it is categorized very good, and in the phase of negotiation shape III: comparing science ideas to textbooks or other printed resources merely reach enough category. Thus, the ABSI learning has improved the student levels of activity and students’ competency to solve the ABSI-based worksheet (LK).

The Cognitive Science of Learning: Concepts and Strategies for the Educator and Learner.

PubMed

Weidman, Joseph; Baker, Keith

2015-12-01

Education is the fundamental process used to develop and maintain the professional skills of physicians. Medical students, residents, and fellows are expected to learn considerable amounts of information as they progress toward board certification. Established practitioners must continue to learn in an effort to remain up-to-date in their clinical realm. Those responsible for educating these populations endeavor to teach in a manner that is effective, efficient, and durable. The study of learning and performance is a subdivision of the field of cognitive science that focuses on how people interpret and process information and how they eventually develop mastery. A deeper understanding of how individuals learn can empower both educators and learners to be more effective in their endeavors. In this article, we review a number of concepts found in the literature on learning and performance. We address both the theoretical principles and the practical applications of each concept. Cognitive load theory, constructivism, and analogical transfer are concepts particularly beneficial to educators. An understanding of goal orientation, metacognition, retrieval, spaced learning, and deliberate practice will primarily benefit the learner. When these concepts are understood and incorporated into education and study, the effectiveness of learning is significantly improved.

Cultural Change and a Balanced Scorecard. Does Your Organization Measure Up?

ERIC Educational Resources Information Center

McAlary, Chris K.

2001-01-01

Discusses the balanced scorecard concept, a customer-based planning and process improvement system for measuring the success of campus business enterprises and helping to better achieve organizational goals. Scorecard design and implementation are described as are selected success stories. (GR)

Organization Development: Concept, Process, and Applications in the Department of Defense

DTIC Science & Technology

1989-04-01

collection, the consultant performs an organizational diagnosis in which the focus is on identifying ways to improve the technical, administrative, and...dynamics, and organizational diagnosis . 2. Action/Planning Workshops. This activity consisted of management conferences and management/worker conferences

Auditing as Institutional Research: A Qualitative Focus.

ERIC Educational Resources Information Center

Fetterman, David M.

1991-01-01

Internal institutional auditing can improve effectiveness and efficiency and protect an institution's assets. Many of the concepts and techniques used to analyze higher education institutions are qualitative in nature and suited to institutional research, including fiscal, operational, data-processing, investigative, management consulting,…

Comparison of resin film infusion, resin transfer molding, and consolidation of textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Dastin, S.

1992-01-01

Under NASA's Novel Composites for Wing and Fuselage Applications (NCWFA) Program, Grumman is developing innovative design concepts and cost-effective fabrication processes for damage-tolerant primary structures that can perform at a design ultimate strain level of 6000 micro-inch/inch. Attention has focused on the use of textile high-performance fiber-reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low-cost resin film infusion (RFI) and resin transfer molding (RTM) processes, and thermoplastic forming concepts. The fabrication of wing 'Y' spars by four different materials/processes methods is described: 'Y' spars fabricated using IM7 angle interlock 0/90 deg woven preforms with +/- 45 deg plies stitched with Toray high-strength graphite thread and processed using RFI and 3501-6 epoxy; 'Y' spars fabricated using G40-800 knitted/stitched preforms and processed using RFI and 3501-6 epoxy; 'Y' spars fabricated using G40-800 knitted/stitched preforms and processed using RTM and Tactix 123/H41 epoxy; and 'Y' spars fabricated using AS4(6k)/PEEK 150-g commingled angle interlock 0/90 deg woven preforms with +/- 45 deg commingled plies stitched using high-strength graphite thread and processed by consolidation. A comparison of the structural efficiency, processability, and projected acquisition cost of these representative spars is presented.

E-learning process maturity level: a conceptual framework

NASA Astrophysics Data System (ADS)

Rahmah, A.; Santoso, H. B.; Hasibuan, Z. A.

2018-03-01

ICT advancement is a sure thing with the impact influencing many domains, including learning in both formal and informal situations. It leads to a new mindset that we should not only utilize the given ICT to support the learning process, but also improve it gradually involving a lot of factors. These phenomenon is called e-learning process evolution. Accordingly, this study attempts to explore maturity level concept to provide the improvement direction gradually and progression monitoring for the individual e-learning process. Extensive literature review, observation, and forming constructs are conducted to develop a conceptual framework for e-learning process maturity level. The conceptual framework consists of learner, e-learning process, continuous improvement, evolution of e-learning process, technology, and learning objectives. Whilst, evolution of e-learning process depicted as current versus expected conditions of e-learning process maturity level. The study concludes that from the e-learning process maturity level conceptual framework, it may guide the evolution roadmap for e-learning process, accelerate the evolution, and decrease the negative impact of ICT. The conceptual framework will be verified and tested in the future study.

Macro-/Micro-Controlled 3D Lithium-Ion Batteries via Additive Manufacturing and Electric Field Processing.

PubMed

Li, Jie; Liang, Xinhua; Liou, Frank; Park, Jonghyun

2018-01-30

This paper presents a new concept for making battery electrodes that can simultaneously control macro-/micro-structures and help address current energy storage technology gaps and future energy storage requirements. Modern batteries are fabricated in the form of laminated structures that are composed of randomly mixed constituent materials. This randomness in conventional methods can provide a possibility of developing new breakthrough processing techniques to build well-organized structures that can improve battery performance. In the proposed processing, an electric field (EF) controls the microstructures of manganese-based electrodes, while additive manufacturing controls macro-3D structures and the integration of both scales. The synergistic control of micro-/macro-structures is a novel concept in energy material processing that has considerable potential for providing unprecedented control of electrode structures, thereby enhancing performance. Electrochemical tests have shown that these new electrodes exhibit superior performance in their specific capacity, areal capacity, and life cycle.

Use of critical thinking in the diagnostic process.

PubMed

Lunney, Margaret

2010-01-01

To demonstrate use of critical thinking in the diagnostic process in order to achieve accuracy of nursing diagnoses. The 7 cognitive skills and 10 habits of mind identified as important for nursing in a Delphi study by Scheffer and Rubenfeld are applied to the diagnostic process using a published case study of a woman with heart failure. Taking into account all data from the case study and using the concepts of critical thinking, two high-accuracy nursing diagnoses were selected to guide nursing interventions. Because the specific types of critical thinking needed for accurate diagnosing are not known, nurses should develop all 17 of the cognitive skills and habits of mind so these thinking abilities are available when needed. The 17 critical thinking concepts should be combined with domain knowledge, e.g., nursing diagnoses, to think about thinking, which will improve critical thinking processes.

Nurses' policy influence: A concept analysis.

PubMed

Arabi, Akram; Rafii, Forough; Cheraghi, Mohammad Ali; Ghiyasvandian, Shahrzad

2014-05-01

Nurses' influence on health policy protects the quality of care by access to required recourses and opportunities. This is a new and important concept for nursing; however, research studies on policy influence of nurses in health care sector are lacking a basic conceptual understanding of what this concept represents. The aim of this paper is to clarify the concept of nurses' policy influence and to propose the definition of this concept, considering the context of Iran. The eight stages of Walker and Avant approach was used to guide this concept analysis. Various databases and internet engines were searched to find all related information about the concept. Textbooks were also searched manually. English language literature reports published between 1990 and 2012 were reviewed. Based on the analysis undertaken, nurses' policy influence is nurses' ability in influencing decisions and affairs related to health through political knowledge, effective communication, and collaboration with other members of the health team, which results in the improvement of nurses' job environment and increases patient outcomes. This is a dynamic process situated on a spectrum and is accompanied with nurses' knowledge, competency, power, and advocacy, and also their ability to change. Nurses have individual views on health care issues and influence health care policies in different ways. With a common understanding of nurses' policy influence as a concept, nurses will recognize the importance of policy making in the health sector and their influence on this process and also on patients' outcomes.

The Future of the Space Age or how to Evaluate Innovative Ideas

NASA Astrophysics Data System (ADS)

Vollerthun, A.; Fricke, E.

2002-05-01

Based on an initiative of the German Aerospace Industry Association to foster a more transparent and structured funding of German commercial-oriented space projects a three-phased approach is suggested in this paper, to stepwise improve and evaluate proposed concepts for space-related innovations. The objective of this concept was to develop a transparent, structured, and reproducible process to select the right innovative project in terms of political, economical, and technical objectives for funding by e.g. a governmental agency. A stepwise process and related methods, that cover technical as well as economical aspects (and related sensitivities) are proposed. Based on the special needs and requirements of space industry the proposals are compared to a set of predefined top level objectives/requirements. Using an initial trades analysis with the criteria company, technology, product, and market, an initial business case is analyzed. The alternative innovative concepts are in the third process step subject to a very detailed analysis. The full economical and technical scale of the projects is evaluated and metrics for e.g. the 'Return on Investment' or 'Break Even Point' are determined, to compare the various innovations. Risks related to time, cost, and quality are considered, when performing sensitivity analysis by varying the most important factors of the project. Before discussing critical aspects of the proposed process, space-related examples will be presented to show how the process could be applied, and how different concepts should be evaluated.

Numerical Study of Low Emission Gas Turbine Combustor Concepts

NASA Technical Reports Server (NTRS)

Yang, Song-Lin

2002-01-01

To further reduce pollutant emissions, such as CO, NO(x), UHCs, etc., in the next few decades, innovative concepts of gas turbine combustors must be developed. Several concepts, such as the LIPP (Lean- Premixed- Prevaporized), RQL (Rich-Burn Quick-Quench Lean-Burn), and LDI (Lean-Direct-Injection), have been under study for many years. To fully realize the potential of these concepts, several improvements, such as inlet geometry, air swirler, aerothermochemistry control, fuel preparation, fuel injection and injector design, etc., must be made, which can be studied through the experimental method and/or the numerical technique. The purpose of this proposal is to use the CFD technique to study, and hence, to guide the design process for low emission gas turbine combustors. A total of 13 technical papers have been (or will be) published.

A practitioner's guide to service development.

PubMed

Lees, Liz

2010-11-01

Service development and service improvement are complex concepts, but this should not prevent practitioners engaging in, or initiating, them. There is no set blueprint for service development so this article examines the process, describes the skills required, lists some change management tools and offers a guide to the stages involved. The article aims to demystify service development for those considering embarking on the process for the first time.

Development of preliminary design concept for a multifunction display and control system for the Orbiter crew station. Task 4: Design concept recommendation

NASA Technical Reports Server (NTRS)

Spiger, R. J.; Farrell, R. J.; Holcomb, G. A.

1982-01-01

Application of multifunction display and control systems to the NASA Orbiter spacecraft offers the potential for reducing crew workload and improving the presentation of system status and operational data to the crew. A design concept is presented for the application of a multifunction display and control system (MFDCS) to the Orbital Maneuvering System and Electrical Power Distribution and Control System on the Orbiter spacecraft. The MFDCS would provide the capability for automation of procedures, fault prioritization and software reconfiguration of the MFDCS data base. The MFDCS would operate as a stand-alone processor to minimize the impact on the current Orbiter software. Supervisory crew command of all current functions would be retained through the use of several operating modes in the system. Both the design concept and the processes followed in defining the concept are described.

Laser Speckle Imaging to Monitor Microvascular Blood Flow: A Review.

PubMed

Vaz, Pedro G; Humeau-Heurtier, Anne; Figueiras, Edite; Correia, Carlos; Cardoso, Joao

2016-01-01

Laser speckle is a complex interference phenomenon that can easily be understood, in concept, but is difficult to predict mathematically, because it is a stochastic process. The use of laser speckle to produce images, which can carry many types of information, is called laser speckle imaging (LSI). The biomedical applications of LSI started in 1981 and, since then, many scientists have improved the laser speckle theory and developed different imaging techniques. During this process, some inconsistencies have been propagated up to now. These inconsistencies should be clarified in order to avoid errors in future works. This review presents a review of the laser speckle theory used in biomedical applications. Moreover, we also make a review of the practical concepts that are useful in the construction of laser speckle imagers. This study is not only an exposition of the concepts that can be found in the literature but also a critical analysis of the investigations presented so far. Concepts like scatterers velocity distribution, effect of static scatterers, optimal speckle size, light penetration angle, and contrast computation algorithms are discussed in detail.

Using Focused Laboratory Management and Quality Improvement Projects to Enhance Resident Training and Foster Scholarship

PubMed Central

Ford, Bradley A.; Klutts, J. Stacey; Jensen, Chris S.; Briggs, Angela S.; Robinson, Robert A.; Bruch, Leslie A.; Karandikar, Nitin J.

2017-01-01

Training in patient safety, quality, and management is widely recognized as an important element of graduate medical education. These concepts have been intertwined in pathology graduate medical education for many years, although training programs face challenges in creating explicit learning opportunities in these fields. Tangibly involving pathology residents in management and quality improvement projects has the potential to teach and reinforce key concepts and further fulfill Accreditation Council for Graduate Medical Education goals for pursuing projects related to patient safety and quality improvement. In this report, we present our experience at a pathology residency program (University of Iowa) in engaging pathology residents in projects related to practical issues of laboratory management, process improvement, and informatics. In this program, at least 1 management/quality improvement project, typically performed during a clinical chemistry/management rotation, was required and ideally resulted in a journal publication. The residency program also initiated a monthly management/informatics series for pathology externs, residents, and fellows that covers a wide range of topics. Since 2010, all pathology residents at the University of Iowa have completed at least 1 management/quality improvement project. Many of the projects involved aspects of laboratory test utilization, with some projects focused on other areas such as human resources, informatics, or process improvement. Since 2012, 31 peer-reviewed journal articles involving effort from 26 residents have been published. Multiple projects resulted in changes in ongoing practice, particularly within the hospital electronic health record. Focused management/quality improvement projects involving pathology residents can result in both meaningful quality improvement and scholarly output. PMID:28913416

Using Focused Laboratory Management and Quality Improvement Projects to Enhance Resident Training and Foster Scholarship.

PubMed

Krasowski, Matthew D; Ford, Bradley A; Klutts, J Stacey; Jensen, Chris S; Briggs, Angela S; Robinson, Robert A; Bruch, Leslie A; Karandikar, Nitin J

2017-01-01

Training in patient safety, quality, and management is widely recognized as an important element of graduate medical education. These concepts have been intertwined in pathology graduate medical education for many years, although training programs face challenges in creating explicit learning opportunities in these fields. Tangibly involving pathology residents in management and quality improvement projects has the potential to teach and reinforce key concepts and further fulfill Accreditation Council for Graduate Medical Education goals for pursuing projects related to patient safety and quality improvement. In this report, we present our experience at a pathology residency program (University of Iowa) in engaging pathology residents in projects related to practical issues of laboratory management, process improvement, and informatics. In this program, at least 1 management/quality improvement project, typically performed during a clinical chemistry/management rotation, was required and ideally resulted in a journal publication. The residency program also initiated a monthly management/informatics series for pathology externs, residents, and fellows that covers a wide range of topics. Since 2010, all pathology residents at the University of Iowa have completed at least 1 management/quality improvement project. Many of the projects involved aspects of laboratory test utilization, with some projects focused on other areas such as human resources, informatics, or process improvement. Since 2012, 31 peer-reviewed journal articles involving effort from 26 residents have been published. Multiple projects resulted in changes in ongoing practice, particularly within the hospital electronic health record. Focused management/quality improvement projects involving pathology residents can result in both meaningful quality improvement and scholarly output.

Conversations With the Community.

ERIC Educational Resources Information Center

Urschel, Jane W.

1998-01-01

Public deliberation is a little-used concept that gets people talking about education and working together to improve it. Study circles discuss each solution's pros and cons, explore people's deeper motivations, weigh others' views carefully, work through conflicting emotions, and identify common ground. Pueblo, Colorado's process is profiled.…

Administrative Leadership. Effective and Responsive Decision Making in Higher Education.

ERIC Educational Resources Information Center

Dressel, Paul L.

Administrative leadership is examined with focus on the processes and problems of campus decision-making. Chapters include: the need for administrators; morals, ethics, and values in higher education; improving administrative communication; conceptions of decision-making; focusing administration interest; understanding external influences,…

Applications of active microwave imagery

NASA Technical Reports Server (NTRS)

Weber, F. P.; Childs, L. F.; Gilbert, R.; Harlan, J. C.; Hoffer, R. M.; Miller, J. M.; Parsons, J.; Polcyn, F.; Schardt, B. B.; Smith, J. L.

1978-01-01

The following topics were discussed in reference to active microwave applications: (1) Use of imaging radar to improve the data collection/analysis process; (2) Data collection tasks for radar that other systems will not perform; (3) Data reduction concepts; and (4) System and vehicle parameters: aircraft and spacecraft.

Improving Students' Revision of Physics Concepts through ICT-Based Co-construction and Prescriptive Tutoring

NASA Astrophysics Data System (ADS)

Soong, Benson; Mercer, Neil

2011-05-01

In this paper, we describe and discuss an information and communication technology (ICT)-based intervention designed to improve secondary school students' revision (in contrast to learning) of physics concepts. We show that students' engagement in joint activities via our ICT-based intervention can provide them (and their teachers) with insights into their knowledge base and thought processes, thereby aiding a remedial process we call prescriptive tutoring. Utilising a design-based research methodology, our intervention is currently being implemented and evaluated in a public secondary school in Singapore. Statistical analysis of pre- and post-intervention test scores from the first iteration of our design experiment show that students in the experimental group significantly out-performed students in both the control and alternate intervention groups. In addition, qualitative data obtained from the students from a focus group session, individual interviews and responses to our survey questions reveal that they became more comfortable with the intervention only after they appreciated how the intervention was designed to help them.

The First View Concept: introduction of industrial flow techniques into emergency medicine organization.

PubMed

Hogan, Barbara; Rasche, Christoph; von Reinersdorff, Andrea Braun

2012-06-01

The number of patients seeking treatment in emergency departments is rising, although many governments are seeking to reduce expenditure on health. Emergency departments must achieve more with the same resources or perform the same functions with fewer resources. Patients demand higher emergency clinical care quality, with low waiting times viewed as a key quality criterion by many patients. The objective of this study was to create an improved working system in emergency departments that cuts patient waiting times for first specialty physician contact. Techniques from industrial flow management were applied to the working process of an emergency department and the concept was named 'First View.' A total of 3269 patient contacts using the First View Concept during a treatment month showed statistical significance. Before introduction, a total 3230 patients in a comparative treatment month had a median waiting time before the first doctor contact of 47.6 min, a first quartile waiting time of 36.1 min, and a third quartile waiting time of 62.7 min. After introduction, 3269 patients had a median waiting time before first specialty physician contact of 11.2 min, a first quartile waiting time of 9.1 min, and a third quartile waiting time of 15.2 min. Industrial flow concepts can achieve significant improvements in emergency department workflows in countries in which sufficient numbers of specialty physicians are available. More attention to the organization of emergency department working processes is needed, especially involving lean management.

Observation Leads to Improved Operations in Nuclear Medicine.

PubMed

Religioso, Deo G

2016-01-01

The concept of observation--going out and seeing what is happening in daily operations---would seem like a normal management activity, but the reality in practice of the philosophy and technique is often underutilized. Once an observation has been determined, the next steps are to test and validate any discoveries on paper. For process change to be implemented, numerical data is needed to back-up observations in order to be heard and taken seriously by the executive team. Boca Raton Regional Hospital saw an opportunity to improve the process for radiopharmaceutical standing orders within its nuclear imaging department. As a result of this observation, the facility realized improved savings and an increase in employee motivation.

The impact of CmapTools utilization towards students' conceptual change on optics topic

NASA Astrophysics Data System (ADS)

Rofiuddin, Muhammad Rifqi; Feranie, Selly

2017-05-01

Science teachers need to help students identify their prior ideas and modify them based on scientific knowledge. This process is called as conceptual change. One of essential tools to analyze students' conceptual change is by using concept map. Concept Maps are graphical representations of knowledge that are comprised of concepts and the relationships between them. Constructing concept map is implemented by adapting the role of technology to support learning process, as it is suitable with Educational Ministry Regulation No.68 year 2013. Institute for Human and Machine Cognition (IHMC) has developed CmapTools, a client-server software for easily construct and visualize concept maps. This research aims to investigate secondary students' conceptual change after experiencing five-stage conceptual teaching model by utilizing CmapTools in learning Optics. Weak experimental method through one group pretest-posttest design is implemented in this study to collect preliminary and post concept map as qualitative data. Sample was taken purposively of 8th grade students (n= 22) at one of private schools Bandung, West Java. Conceptual change based on comparison of preliminary and post concept map construction is assessed based on rubric of concept map scoring and structure. Results shows significance conceptual change differences at 50.92 % that is elaborated into concept map element such as prepositions and hierarchical level in high category, cross links in medium category and specific examples in low category. All of the results are supported with the students' positive response towards CmapTools utilization that indicates improvement of motivation, interest, and behavior aspect towards Physics lesson.

CASPER Version 2.0

NASA Technical Reports Server (NTRS)

Chien, Steve; Rabideau, Gregg; Tran, Daniel; Knight, Russell; Chouinard, Caroline; Estlin, Tara; Gaines, Daniel; Clement, Bradley; Barrett, Anthony

2007-01-01

CASPER is designed to perform automated planning of interdependent activities within a system subject to requirements, constraints, and limitations on resources. In contradistinction to the traditional concept of batch planning followed by execution, CASPER implements a concept of continuous planning and replanning in response to unanticipated changes (including failures), integrated with execution. Improvements over other, similar software that have been incorporated into CASPER version 2.0 include an enhanced executable interface to facilitate integration with a wide range of execution software systems and supporting software libraries; features to support execution while reasoning about urgency, importance, and impending deadlines; features that enable accommodation to a wide range of computing environments that include various central processing units and random- access-memory capacities; and improved generic time-server and time-control features.

Improving processing and toughness of a high performance composite matrix through an interpenetrating polymer network. VI

NASA Technical Reports Server (NTRS)

Pater, Ruth H.

1990-01-01

A simultaneous semi-interpenetrating polymer network (semi-IPN) concept is presented which combines easy-to-process, but brittle, thermosetting polyimides with tough, but difficult to process, linear thermoplastic polyimides. The combination results in a semi-IPN with the easy processability of a thermoset and good toughness of a thermoplastic. Four simultaneous semi-IPN systems were developed from commercially available NR-150B2 combined with each of the four Thermid materials (LR-600, AL-600, MC-600, and FA-700). It is concluded that there is a significant improvement in resin fracture toughness of Thermid-polyimide-based semi-IPN systems and some improvement in composite microcracking resistance compared to Thermid LR-600. Excellent composite mechanical properties have been achieved. These new semi-IPN materials have the potential to be used as composite matrices, adhesives, and molding materials.

Developing and executing quality improvement projects (concept, methods, and evaluation).

PubMed

Likosky, Donald S

2014-03-01

Continuous quality improvement, quality assurance, cycles of change--these words of often used to express the process of using data to inform and improve clinical care. Although many of us have been exposed to theories and practice of experimental work (e.g., randomized trial), few of us have been similarly exposed to the science underlying quality improvement. Through the lens of a single-center quality improvement study, this article exposes the reader to methodology for conducting such studies. The reader will gain an understanding of these methods required to embark on such a study.

Chronic antioxidant and mitochondrial cofactor administration improves discrimination learning in aged but not young dogs.

PubMed

Siwak, Christina T; Tapp, P Dwight; Head, Elizabeth; Zicker, Steven C; Murphey, Heather L; Muggenburg, Bruce A; Ikeda-Douglas, Candace J; Cotman, Carl W; Milgram, Norton W

2005-03-01

The present experiment was part of a 3-year longitudinal study examining the effects of age and antioxidant treatment on cognitive decline in beagles. Two size-concept tasks were administered following pretraining on a series of two-choice (six subtests) and three-choice size discrimination tasks. Thirty-nine young and aged dogs were matched for age and cognitive ability then divided into four treatment groups. A combined antioxidant-mitochondrial cofactor treatment led to significantly improved performance in aged dogs on the first subtest of the two-choice size discrimination series. Treated aged dogs did not significantly differ from the young. Aged dogs on the antioxidant diet continued to perform better than aged controls on the second and third subtests, but these effects did not achieve significance. Young dogs performed significantly better than the aged dogs on the second and third subtests. The remaining two-choice tasks of the discrimination series were comparatively easy, leading to a floor effect. The antioxidant animals performed better on the three-choice size discrimination, but not on the two size-concept tasks. Antioxidants improved the performance of aged dogs on the initial learning tests, suggesting a selective improvement of factors related to the aging process and specific cognitive processes rather than general cognitive enhancement.

Applying organizational science to health care: a framework for collaborative practice.

PubMed

Dow, Alan W; DiazGranados, Deborah; Mazmanian, Paul E; Retchin, Sheldon M

2013-07-01

Developing interprofessional education (IPE) curricula that improve collaborative practice across professions has proven challenging. A theoretical basis for understanding collaborative practice in health care settings is needed to guide the education and evaluation of health professions trainees and practitioners and support the team-based delivery of care. IPE should incorporate theory-driven, evidence-based methods and build competency toward effective collaboration.In this article, the authors review several concepts from the organizational science literature and propose using these as a framework for understanding how health care teams function. Specifically, they outline the team process model of action and planning phases in collaborative work; discuss leadership and followership, including how locus (a leader's integration into a team's usual work) and formality (a leader's responsibility conferred by the traditional hierarchy) affect team functions; and describe dynamic delegation, an approach to conceptualizing escalation and delegation within health care teams. For each concept, they identify competencies for knowledge, attitudes, and behaviors to aid in the development of innovative curricula to improve collaborative practice. They suggest that gaining an understanding of these principles will prepare health care trainees, whether team leaders or members, to analyze team performance, adapt behaviors that improve collaboration, and create team-based health care delivery processes that lead to improved clinical outcomes.

Applying Organizational Science to Health Care: A Framework for Collaborative Practice

PubMed Central

Dow, Alan W.; DiazGranados, Deborah; Mazmanian, Paul E.; Retchin, Sheldon M.

2013-01-01

Developing interprofessional education (IPE) curricula that improve collaborative practice across professions has proven challenging. A theoretical basis for understanding collaborative practice in health care settings is needed to guide the education and evaluation of health professions trainees and practitioners and support the team-based delivery of care. IPE should incorporate theory-driven, evidence-based methods and build competency toward effective collaboration. In this article, the authors review several concepts from the organizational science literature and propose using these as a framework for understanding how health care teams function. Specifically, they outline the team process model of action and planning phases in collaborative work; discuss leadership and followership, including how locus (a leader’s integration into a team’s usual work) and formality (a leader’s responsibility conferred by the traditional hierarchy) affect team functions; and describe dynamic delegation, an approach to conceptualizing escalation and delegation within health care teams. For each concept, they identify competencies for knowledge, attitudes, and behaviors to aid in the development of innovative curricula to improve collaborative practice. They suggest that gaining an understanding of these principles will prepare health care trainees, whether team leaders or members, to analyze team performance, adapt behaviors that improve collaboration, and create team-based health care delivery processes that lead to improved clinical outcomes. PMID:23702530

Factors Influencing e-Business Adoption in the Greek Hotel Sector

NASA Astrophysics Data System (ADS)

Samanta, Ir.; Kyriazopoulos, P.

The purpose of this research is to identify the impact of business process improvement in the area of e-marketing in the hotel industry. The research identifies the barriers which block organizational change effort. A sample of thirty hotels in the city of Athens was used.This paper presents a SWOT analysis of the hotel sector, identifying the strengths, weaknesses, opportunities and threats that firms faced in the process of change. The results show that the majority of firms use, to a small extent, the e-marketing concept to improve their communication strategy and reach market segments.

Sigma Metrics Across the Total Testing Process.

PubMed

Charuruks, Navapun

2017-03-01

Laboratory quality control has been developed for several decades to ensure patients' safety, from a statistical quality control focus on the analytical phase to total laboratory processes. The sigma concept provides a convenient way to quantify the number of errors in extra-analytical and analytical phases through the defect per million and sigma metric equation. Participation in a sigma verification program can be a convenient way to monitor analytical performance continuous quality improvement. Improvement of sigma-scale performance has been shown from our data. New tools and techniques for integration are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

Economically oriented process optimization in waste management.

PubMed

Maroušek, Josef

2014-06-01

A brief report on the development of novel apparatus is presented. It was verified in a commercial scale that a new concept of anaerobic fermentation followed by continuous pyrolysis is technically and economically feasible to manage previously enzymatically hydrolyzed waste haylage in huge volumes. The design of the concept is thoroughly described, documented in figures, and biochemically analyzed in detail. Assessment of the concept shows that subsequent pyrolysis of the anaerobically fermented residue allows among biogas to produce also high-quality biochar. This significantly improves the overall economy. In addition, it may be assumed that this applied research is consistent with previous theoretical assumptions stating that any kind of aerobic or anaerobic fermentation increases the microporosity of the biochar obtained.

The Experience Factory: Strategy and Practice

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi

1995-01-01

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies through capitalization and reuse of its cycle experience and products. The paper introduces the major concepts of the proposed approach, discusses their relationship with other approaches used in the industry, and presents a case in which those concepts have been successfully applied.

Problem solving based learning model with multiple representations to improve student's mental modelling ability on physics

NASA Astrophysics Data System (ADS)

Haili, Hasnawati; Maknun, Johar; Siahaan, Parsaoran

2017-08-01

Physics is a lessons that related to students' daily experience. Therefore, before the students studying in class formally, actually they have already have a visualization and prior knowledge about natural phenomenon and could wide it themselves. The learning process in class should be aimed to detect, process, construct, and use students' mental model. So, students' mental model agree with and builds in the right concept. The previous study held in MAN 1 Muna informs that in learning process the teacher did not pay attention students' mental model. As a consequence, the learning process has not tried to build students' mental modelling ability (MMA). The purpose of this study is to describe the improvement of students' MMA as a effect of problem solving based learning model with multiple representations approach. This study is pre experimental design with one group pre post. It is conducted in XI IPA MAN 1 Muna 2016/2017. Data collection uses problem solving test concept the kinetic theory of gasses and interview to get students' MMA. The result of this study is clarification students' MMA which is categorized in 3 category; High Mental Modelling Ability (H-MMA) for 7

Effectiveness of concept mapping and traditional linear nursing care plans on critical thinking skills in clinical pediatric nursing course.

PubMed

Aein, Fereshteh; Aliakbari, Fatemeh

2017-01-01

Concept map is a useful cognitive tool for enhancing a student's critical thinking (CT) by encouraging students to process information deeply for understanding. However, the evidence regarding its effectiveness on nursing students' CT is contradictory. This paper compares the effectiveness of concept mapping and traditional linear nursing care planning on students' CT. An experimental design was used to examine the CT of 60 baccalaureate students who participated in pediatric clinical nursing course in the Shahrekord University of Medical Sciences, Shahrekord, Iran in 2013. Participants were randomly divided into six equal groups of each 10 student, of which three groups were the control group, and the others were the experimental group. The control group completed nine traditional linear nursing care plans, whereas experimental group completed nine concept maps during the course. Both groups showed significant improvement in overall and all subscales of the California CT skill test from pretest to posttest ( P < 0.001), but t -test demonstrated that improvement in students' CT skills in the experimental group was significantly greater than in the control group after the program ( P < 0.001). Our findings support that concept mapping can be used as a clinical teaching-learning activity to promote CT in nursing students.

Effectiveness of concept mapping and traditional linear nursing care plans on critical thinking skills in clinical pediatric nursing course

PubMed Central

Aein, Fereshteh; Aliakbari, Fatemeh

2017-01-01

Introduction: Concept map is a useful cognitive tool for enhancing a student's critical thinking (CT) by encouraging students to process information deeply for understanding. However, the evidence regarding its effectiveness on nursing students’ CT is contradictory. This paper compares the effectiveness of concept mapping and traditional linear nursing care planning on students’ CT. Methods: An experimental design was used to examine the CT of 60 baccalaureate students who participated in pediatric clinical nursing course in the Shahrekord University of Medical Sciences, Shahrekord, Iran in 2013. Results: Participants were randomly divided into six equal groups of each 10 student, of which three groups were the control group, and the others were the experimental group. The control group completed nine traditional linear nursing care plans, whereas experimental group completed nine concept maps during the course. Both groups showed significant improvement in overall and all subscales of the California CT skill test from pretest to posttest (P < 0.001), but t-test demonstrated that improvement in students’ CT skills in the experimental group was significantly greater than in the control group after the program (P < 0.001). Conclusions: Our findings support that concept mapping can be used as a clinical teaching-learning activity to promote CT in nursing students. PMID:28546978

Influence of Microstructure Representation on Flow Stress and Grain Size Prediction in Through-Process Modeling of AA5182 Sheet Production

NASA Astrophysics Data System (ADS)

Lohmar, Johannes; Bambach, Markus; Karhausen, Kai F.

2013-01-01

Integrated computational materials engineering is an up to date method for developing new materials and optimizing complete process chains. In the simulation of a process chain, material models play a central role as they capture the response of the material to external process conditions. While much effort is put into their development and improvement, less attention is paid to their implementation, which is problematic because the representation of microstructure in the model has a decisive influence on modeling accuracy and calculation speed. The aim of this article is to analyze the influence of different microstructure representation concepts on the prediction of flow stress and microstructure evolution when using the same set of material equations. Scalar, tree-based and cluster-based concepts are compared for a multi-stage rolling process of an AA5182 alloy. It was found that implementation influences the predicted flow stress and grain size, in particular in the regime of coupled hardening and softening.

Management Design Theories

NASA Astrophysics Data System (ADS)

Pries-Heje, Jan; Baskerville, Richard L.

This paper elaborates a design science approach for management planning anchored to the concept of a management design theory. Unlike the notions of design theories arising from information systems, management design theories can appear as a system of technological rules, much as a system of hypotheses or propositions can embody scientific theories. The paper illus trates this form of management design theories with three grounded cases. These grounded cases include a software process improvement study, a user involvement study, and an organizational change study. Collectively these studies demonstrate how design theories founded on technological rules can not only improve the design of information systems, but that these concepts have great practical value for improving the framing of strategic organi zational design decisions about such systems. Each case is either grounded in an empirical sense, that is to say, actual practice, or it is grounded to practices described extensively in the practical literature. Such design theories will help managers more easily approach complex, strategic decisions.

Food entries in a large allergy data repository

PubMed Central

Plasek, Joseph M.; Goss, Foster R.; Lai, Kenneth H.; Lau, Jason J.; Seger,, Diane L.; Blumenthal, Kimberly G.; Wickner, Paige G.; Slight, Sarah P.; Chang, Frank Y.; Topaz, Maxim; Bates, David W.

2016-01-01

Objective Accurate food adverse sensitivity documentation in electronic health records (EHRs) is crucial to patient safety. This study examined, encoded, and grouped foods that caused any adverse sensitivity in a large allergy repository using natural language processing and standard terminologies. Methods Using the Medical Text Extraction, Reasoning, and Mapping System (MTERMS), we processed both structured and free-text entries stored in an enterprise-wide allergy repository (Partners’ Enterprise-wide Allergy Repository), normalized diverse food allergen terms into concepts, and encoded these concepts using the Systematized Nomenclature of Medicine – Clinical Terms (SNOMED-CT) and Unique Ingredient Identifiers (UNII) terminologies. Concept coverage also was assessed for these two terminologies. We further categorized allergen concepts into groups and calculated the frequencies of these concepts by group. Finally, we conducted an external validation of MTERMS’s performance when identifying food allergen terms, using a randomized sample from a different institution. Results We identified 158 552 food allergen records (2140 unique terms) in the Partners repository, corresponding to 672 food allergen concepts. High-frequency groups included shellfish (19.3%), fruits or vegetables (18.4%), dairy (9.0%), peanuts (8.5%), tree nuts (8.5%), eggs (6.0%), grains (5.1%), and additives (4.7%). Ambiguous, generic concepts such as “nuts” and “seafood” accounted for 8.8% of the records. SNOMED-CT covered more concepts than UNII in terms of exact (81.7% vs 68.0%) and partial (14.3% vs 9.7%) matches. Discussion Adverse sensitivities to food are diverse, and existing standard terminologies have gaps in their coverage of the breadth of allergy concepts. Conclusion New strategies are needed to represent and standardize food adverse sensitivity concepts, to improve documentation in EHRs. PMID:26384406

Food entries in a large allergy data repository.

PubMed

Plasek, Joseph M; Goss, Foster R; Lai, Kenneth H; Lau, Jason J; Seger, Diane L; Blumenthal, Kimberly G; Wickner, Paige G; Slight, Sarah P; Chang, Frank Y; Topaz, Maxim; Bates, David W; Zhou, Li

2016-04-01

Accurate food adverse sensitivity documentation in electronic health records (EHRs) is crucial to patient safety. This study examined, encoded, and grouped foods that caused any adverse sensitivity in a large allergy repository using natural language processing and standard terminologies. Using the Medical Text Extraction, Reasoning, and Mapping System (MTERMS), we processed both structured and free-text entries stored in an enterprise-wide allergy repository (Partners' Enterprise-wide Allergy Repository), normalized diverse food allergen terms into concepts, and encoded these concepts using the Systematized Nomenclature of Medicine - Clinical Terms (SNOMED-CT) and Unique Ingredient Identifiers (UNII) terminologies. Concept coverage also was assessed for these two terminologies. We further categorized allergen concepts into groups and calculated the frequencies of these concepts by group. Finally, we conducted an external validation of MTERMS's performance when identifying food allergen terms, using a randomized sample from a different institution. We identified 158 552 food allergen records (2140 unique terms) in the Partners repository, corresponding to 672 food allergen concepts. High-frequency groups included shellfish (19.3%), fruits or vegetables (18.4%), dairy (9.0%), peanuts (8.5%), tree nuts (8.5%), eggs (6.0%), grains (5.1%), and additives (4.7%). Ambiguous, generic concepts such as "nuts" and "seafood" accounted for 8.8% of the records. SNOMED-CT covered more concepts than UNII in terms of exact (81.7% vs 68.0%) and partial (14.3% vs 9.7%) matches. Adverse sensitivities to food are diverse, and existing standard terminologies have gaps in their coverage of the breadth of allergy concepts. New strategies are needed to represent and standardize food adverse sensitivity concepts, to improve documentation in EHRs. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Aeronautics Autonomy Testbed Capability (AATC) Team Developed Concepts

NASA Technical Reports Server (NTRS)

Smith, Phillip J.

2018-01-01

In 2015, the National Aeronautics and Space Administration (NASA) formed a multi-center, interdisciplinary team of engineers from three different aeronautics research centers who were tasked with improving NASA autonomy research capabilities. This group was subsequently named the Aeronautics Autonomy Testbed Capability (AATC) team. To aid in confronting the autonomy research directive, NASA contracted IDEO, a design firm, to provide consultants and guides to educate NASA engineers through the practice of design thinking, which is an unconventional method for aerospace design processes. The team then began learning about autonomy research challenges by conducting interviews with a diverse group of researchers and pilots, military personnel and civilians, experts and amateurs. Part of this design thinking process involved developing ideas for products or programs known as concepts that could enable real world fulfillment of the most important latent needs identified through analysis of the interviews. The concepts are intended to be sacrificial, intermediate steps in the design thinking process and are presented in this report to record the efforts of the AATC group. Descriptions are provided in present tense to allow for further ideation and imagining the concept as reality as was attempted during the teams discussions and interviews. This does not indicate that the concepts are actually in practice within NASA though there may be similar existing programs independent of AATC. These concepts were primarily created at two distinct stages during the design thinking process. After the initial interviews, there was a workshop for concept development and the resulting ideas are shown in this work as from the First Round. As part of succeeding interviews, the team members presented the First Round concepts to refine the understanding of existing research needs. This knowledge was then used to generate an additional set of concepts denoted as the Second Round. Some concepts were created by a single person in a few minutes while others were refined by the entire team over several weeks. Thus, certain ideas are more detailed than others but those from the second round are not necessarily more comprehensive than the first round concepts. Primarily, as reported here in the Second Round section, the designs serve to encompass more of the high level end user research needs which were not necessarily known to the team during the prior workshop. In the figures provided throughout this report, illustrations are often provided to represent a concept. Nearly all of the images are informal sketches or renderings and this casualness should, hopefully, not be held to negate the potential insights available within the concepts.

Improving the medical records department processes by lean management.

PubMed

Ajami, Sima; Ketabi, Saeedeh; Sadeghian, Akram; Saghaeinnejad-Isfahani, Sakine

2015-01-01

Lean management is a process improvement technique to identify waste actions and processes to eliminate them. The benefits of Lean for healthcare organizations are that first, the quality of the outcomes in terms of mistakes and errors improves. The second is that the amount of time taken through the whole process significantly improves. The purpose of this paper is to improve the Medical Records Department (MRD) processes at Ayatolah-Kashani Hospital in Isfahan, Iran by utilizing Lean management. This research was applied and an interventional study. The data have been collected by brainstorming, observation, interview, and workflow review. The study population included MRD staff and other expert staff within the hospital who were stakeholders and users of the MRD. The MRD were initially taught the concepts of Lean management and then formed into the MRD Lean team. The team then identified and reviewed the current processes subsequently; they identified wastes and values, and proposed solutions. The findings showed that the MRD units (Archive, Coding, Statistics, and Admission) had 17 current processes, 28 wastes, and 11 values were identified. In addition, they offered 27 comments for eliminating the wastes. The MRD is the critical department for the hospital information system and, therefore, the continuous improvement of its services and processes, through scientific methods such as Lean management, are essential. The study represents one of the few attempts trying to eliminate wastes in the MRD.

Building the Impetus for Change: An Across-Curriculum Initiative in Biology

ERIC Educational Resources Information Center

Gerrish, Gretchen A.; Sanderfoot, Anton; King-Heiden, Tisha; Abler, Mike; Perez, Kathryn E.

2015-01-01

The authors wanted to improve student learning of evolutionary concepts by integrating content across the biology major. In this article they describe the process used to develop support among members of the department and administration to implement and measure the outcomes of curricular reforms.

An Integrative Landscape-Scale Exercise for Introductory Soil Science Classes.

ERIC Educational Resources Information Center

Levy, D. B.; Graham, R. C.

1993-01-01

Describes how teachers can improve introductory soil science courses by applying concepts taught in the classroom to actual field situations. Presents a specific example of a field exercise designed to illustrate soil properties and processes with respect to their environmental settings. (11 references) (Author/MCO)

Continuous Process Improvement Transformation Guidebook

DTIC Science & Technology

2006-05-01

except full-scale im- plementation. Error Proofing ( Poka Yoke ) Finding and correcting defects caused by errors costs more and more as a system or...proofing. Shigeo Shingo introduced the concept of Poka - Yoke at Toyota Motor Corporation. Poka Yoke (pronounced “poh-kah yoh-kay”) translates to “avoid

14 CFR 1240.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Contributions Board. (d) Commercial quality refers to computer software that is not in an experimental or beta..., engineering or scientific concept, idea, design, process, or product. (h) Innovator means any person listed as..., machine, manufacture, design, or composition of matter, or any new and useful improvement thereof, or any...

[Outsourcing. Advantages and disadvantages of these processes with regard to the management from the view of the technical services in a hospital].

PubMed

Chen, B

1999-01-01

Cost effectiveness and improvement of service quality are the main reasons for outsourcing in hospitals. Long term relationships and customer satisfaction confirm the concept of providing complex services from external specialized companies. There is no standard guideline to determine whether outsourcing should be preferred to inhouse service. Outsourcing is not a guarantee for improved service and a lot of promoted advantages could theoretically also be provided by inhouse service departments. But the effectiveness of inhouse services has to be proven in comparison and competition to external providers. The often named disadvantages of outsourcing have to be considered. Nevertheless they are also not only subject to outsourcing and can also be a problem in inhouse organisations. Furthermore a proper controlling is an important tool to eliminate most of the difficulties in outsourcing projects. In the competition between internal and external service providers concepts of service partnerships that integrate internal and external resources will be the successful ones in the long run. The main potential for improvement is the optimization of the whole process of maintenance management, instead of the mere reduction of head count.

Definition and Preliminary Design of the Laser Atmospheric Wind Sounder (LAWS) Phase 1. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1990-01-01

The laser atmospheric wind sounder (LAWS) is a facility instrument of the Earth Observing System (EOS) and is the culmination of over 20 years of effort in the field of laser Doppler wind sensing. LAWS will by the first instrument to fly in space with the capability of providing global-scale tropospheric wind profiles at high spatial resolutions. Global-scale wind profiles are necessary for: (1) more accurate diagnostics of large-scale circulation and climate dynamics; (2) improved numerical weather prediction; (3) improved understanding of mesoscale systems; (4) improved understanding of global biogeochemical and hydrologic cycles. The objective of phase 1 of the LAWS study was to evaluate competing concepts and develop a baseline configuration for the LAWS instrument. The first phase of the study consisted of identifying realistic concepts for LAWS and analyzing them in sufficient detail to be able to choose the most promising one for the LAWS application. System configurations were then developed for the chosen concept. The concept and subsequent configuration were to be compatible with two prospective platforms: the Japanese polar orbiting platform (JPOP) and the Space Station Freedom (as an attached payload). After an objective and comprehensive concept selection process, a heterodyne detection Doppler lidar using a CO2 laser transmitter operating at 9.1 microns over a 2.1 micron system with a solid state laser was chosen. The CO2 lidar concept was then analyzed in detail to arrive at a configuration for the instrument and its major subsystems. A configuration for LAWS was arrived at which meets the performance requirements, and this design is presented.

Using digital multimedia to improve parents' and children's understanding of clinical trials.

PubMed

Tait, Alan R; Voepel-Lewis, Terri; Levine, Robert

2015-06-01

Data show that many research subjects have difficulty understanding study information using traditional paper consent documents. This study, therefore, was designed to evaluate the effect of an interactive multimedia program on improving parents' and children's understanding of clinical trial concepts and participation. Parents (n=148) and children (n=135) were each randomised to receive information regarding clinical trials using either a traditional paper format (TF) or an interactive iPad program (IP) with inline exercises. Participants' understanding of the information was assessed using semistructured interviews prior to (pretest) and after (post-test) receiving the information. Participants also completed a short survey to assess their perceptions of information delivery and satisfaction with the process. Regardless of the mode of information delivery, all participants demonstrated improved pretest to post-test understanding. While there were no statistical differences in parents' post-test understanding between the TF and IP groups, children in the IP group had significantly greater post-test understanding compared with children in the TF group (11.65 (4.1) vs 8.85 (4.1) (2.8, 1.4, 4.2) 0-18 scale where 18=complete understanding). Furthermore, the IP was found to be significantly 'easier to follow' and 'more effective' in presenting information compared with the TF. Results demonstrated the importance of providing information regarding clinical trial concepts to parents and children. Importantly, the ability of interactive multimedia to improve understanding of clinical trial concepts and satisfaction with information delivery, particularly among children, supports this approach as a novel and effective vehicle for enhancing the informed consent process. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Semantic Similarity between Web Documents Using Ontology

NASA Astrophysics Data System (ADS)

Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

2018-06-01

The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

Semantic Similarity between Web Documents Using Ontology

NASA Astrophysics Data System (ADS)

Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

2018-03-01

The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

The impact of project-based learning on improving student learning outcomes of sustainability concepts in transportation engineering courses

NASA Astrophysics Data System (ADS)

Fini, Elham H.; Awadallah, Faisal; Parast, Mahour M.; Abu-Lebdeh, Taher

2018-05-01

This paper describes an intervention to enhance students' learning by involving students in brainstorming activities about sustainability concepts and their implications in transportation engineering. The paper discusses the process of incorporating the intervention into a transportation course, as well as the impact of this intervention on students' learning outcomes. To evaluate and compare students' learning as a result of the intervention, the Laboratory for Innovative Technology and Engineering Education survey instrument was used. The survey instrument includes five constructs: higher-order cognitive skills, self-efficacy, ease of learning subject matter, teamwork, and communication skills. Pre- and post-intervention surveys of student learning outcomes were conducted to determine the effectiveness of the intervention on enhancing students' learning outcomes. The results show that the implementation of the intervention significantly improved higher-order cognitive skills, self-efficacy, teamwork, and communication skills. Involving students in brainstorming activities related to sustainability concepts and their implications in transportation proved to be an effective teaching and learning strategy.

Sophia: A Expedient UMLS Concept Extraction Annotator.

PubMed

Divita, Guy; Zeng, Qing T; Gundlapalli, Adi V; Duvall, Scott; Nebeker, Jonathan; Samore, Matthew H

2014-01-01

An opportunity exists for meaningful concept extraction and indexing from large corpora of clinical notes in the Veterans Affairs (VA) electronic medical record. Currently available tools such as MetaMap, cTAKES and HITex do not scale up to address this big data need. Sophia, a rapid UMLS concept extraction annotator was developed to fulfill a mandate and address extraction where high throughput is needed while preserving performance. We report on the development, testing and benchmarking of Sophia against MetaMap and cTAKEs. Sophia demonstrated improved performance on recall as compared to cTAKES and MetaMap (0.71 vs 0.66 and 0.38). The overall f-score was similar to cTAKES and an improvement over MetaMap (0.53 vs 0.57 and 0.43). With regard to speed of processing records, we noted Sophia to be several fold faster than cTAKES and the scaled-out MetaMap service. Sophia offers a viable alternative for high-throughput information extraction tasks.

Diversity of Students' background as a source for improving teaching Physics at a Liberal Arts Institution

NASA Astrophysics Data System (ADS)

Agrest, Mikhail

2001-11-01

Presented work is dedicated to improvement of teaching-learning process and classroom time utilization. What should students carry with them from the classroom? Enthusiasm of their teacher, understanding of the basic concepts, understanding of what they should work on at home and, of course, some notes Teaching materials, which relate concepts of Physics to each other and to a variety of concepts in other areas of knowledge and human activity were developed. This approach is based on my experience of interacting with students with diversity of backgrounds, educational goals and objectives. Those include Business and Politics, Literature and Media, everyday family and College life, etc. A supplement workbook based on teaching materials was developed to be available for students to make notes during the lectures. This method was tested in Introductory Physics classes at the College of Charleston during some past years. The teaching-learning effectiveness has been increased and positive feedback was received from students and faculty at the College and some other Universities.

Improving the human readability of Arden Syntax medical logic modules using a concept-oriented terminology and object-oriented programming expressions.

PubMed

Choi, Jeeyae; Bakken, Suzanne; Lussier, Yves A; Mendonça, Eneida A

2006-01-01

Medical logic modules are a procedural representation for sharing task-specific knowledge for decision support systems. Based on the premise that clinicians may perceive object-oriented expressions as easier to read than procedural rules in Arden Syntax-based medical logic modules, we developed a method for improving the readability of medical logic modules. Two approaches were applied: exploiting the concept-oriented features of the Medical Entities Dictionary and building an executable Java program to replace Arden Syntax procedural expressions. The usability evaluation showed that 66% of participants successfully mapped all Arden Syntax rules to Java methods. These findings suggest that these approaches can play an essential role in the creation of human readable medical logic modules and can potentially increase the number of clinical experts who are able to participate in the creation of medical logic modules. Although our approaches are broadly applicable, we specifically discuss the relevance to concept-oriented nursing terminologies and automated processing of task-specific nursing knowledge.

Sustainable Agro-Industrial Ecology Concept of the Madura Island

NASA Astrophysics Data System (ADS)

Widjaya, Joyce Martha; Tanuwidjaja, Gunawan

2017-07-01

Madura as one small island in East Java Province, Indonesia faced many challenges due to limited transportation connectivity, limited water resources and karst geology. Due to this reasons, the Government of Indonesia proposed a strategic plan to improve the development of the island to Surabaya, the largest port for the Eastern of Indonesia. It was started with building the Surabaya - Madura (SuraMadu) Bridge with 5.7 km length in 2003. The bridge was finally completed in 2009, improving the traffic flow into the island and development of Madura Island. Unfortunately, the strategy would not be comprehensive without strategic development of the Madura Island, especially in Bangkalan District (Kabupaten Bangkalan). The Central Government has proposed a Green Industry with zero waste and clean energy concept. This industry and port would process the agriculture products from Madura for the export and Eastern part of Indonesia market. Therefore, an industrial ecology concept was needed to achieve the sustainable green industry for Eastern of Indonesia.

Sophia: A Expedient UMLS Concept Extraction Annotator

PubMed Central

Divita, Guy; Zeng, Qing T; Gundlapalli, Adi V.; Duvall, Scott; Nebeker, Jonathan; Samore, Matthew H.

2014-01-01

An opportunity exists for meaningful concept extraction and indexing from large corpora of clinical notes in the Veterans Affairs (VA) electronic medical record. Currently available tools such as MetaMap, cTAKES and HITex do not scale up to address this big data need. Sophia, a rapid UMLS concept extraction annotator was developed to fulfill a mandate and address extraction where high throughput is needed while preserving performance. We report on the development, testing and benchmarking of Sophia against MetaMap and cTAKEs. Sophia demonstrated improved performance on recall as compared to cTAKES and MetaMap (0.71 vs 0.66 and 0.38). The overall f-score was similar to cTAKES and an improvement over MetaMap (0.53 vs 0.57 and 0.43). With regard to speed of processing records, we noted Sophia to be several fold faster than cTAKES and the scaled-out MetaMap service. Sophia offers a viable alternative for high-throughput information extraction tasks. PMID:25954351

Improving Process Evaluations of Health Behavior Interventions: Learning From the Social Sciences.

PubMed

Morgan-Trimmer, Sarah

2015-09-01

This article reflects on the current state of process evaluations of health behavior interventions and argues that evaluation practice in this area could be improved by drawing on the social science literature to a greater degree. While process evaluations of health behavior interventions have increasingly engaged with the social world and sociological aspects of interventions, there has been a lag in applying relevant and potentially useful approaches from the social sciences. This has limited the scope for health behavior process evaluations to address pertinent contextual issues and methodological challenges. Three aspects of process evaluations are discussed: the incorporation of contexts of interventions; engagement with the concept of "process" in process evaluation; and working with theory to understand interventions. Following on from this, the article also comments on the need for new methodologies and on the implications for addressing health inequalities. © The Author(s) 2013.

Discharging patients earlier in the day: a concept worth evaluating.

PubMed

Kravet, Steven J; Levine, Rachel B; Rubin, Haya R; Wright, Scott M

2007-01-01

Patient discharges from the hospital often occur late in the day and are frequently clustered after 4 PM. When inpatients leave earlier in the day, quality is improved because new admissions awaiting beds are able to leave the emergency department sooner and emergency department waiting room backlog is reduced. Nursing staff, whose work patterns traditionally result in high activity of discharge and admission between 5 PM and 8 PM, benefit by spreading out their work across a longer part of the day. Discharging patients earlier in the day also has the potential to increase patient satisfaction. Despite multiple stakeholders in the discharge planning process, physicians play the most important role. Getting physician buy-in requires an ability to teach physicians about the concept of early-in-the-day discharges and their impact on the process. We defined a new physician-centered discharge planning process and introduced it to an internal medicine team with an identical control team as a comparison. Discharge time of day was analyzed for 1 month. Mean time of day of discharge was 13:39 for the intervention group versus 15:45 for the control group (P<.001). If reproduced successfully, this process could improve quality at an important transition point in patient care.

Process control systems at Homer City coal preparation plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shell, W.P.

1983-03-01

An important part of process control engineering is the implementation of the basic control system design through commissioning to routine operation. This is a period when basic concepts can be reviewed and improvements either implemented or recorded for application in future systems. The experience of commissioning the process control systems in the Homer City coal cleaning plant are described and discussed. The current level of operating control performance in individual sections and the overall system are also reported and discussed.

Bringing in the "CIA": A New Process to Improve Staff Communication.

PubMed

Hunter, Rebecca; Mitchell, Jinjer; Loomis, Elena

2015-01-01

Nurses consistently express dissatisfaction with the overwhelming amount and rate of change in health care today. Nurse educators identified this as a problem at a 475-bed hospital and developed a process to present changes in information in a new and exciting method. This article reports on the identification and implementation of the new communication model and the lessons learned during the process. A new method for communication dissemination was designed utilizing a "Coordinator Information Advisory Group" concept.

The Brazilian Air Force Uniform Distribution Process: Using Lean Thinking, Statistical Process Control and Theory of Constraints to Address Improvement Opportunities

DTIC Science & Technology

2015-03-26

universal definition” (Evans & Lindsay, 1996). Heizer and Render (2010) argue that several definitions of this term are user-based, meaning, that quality...for example, really good ice cream has high butterfat levels.” ( Heizer & Render , 2010). Garvin, in his Competing in Eight Dimensions of Quality...Montgomery, 2005). As for definition purposes, the concept adopted by this research was provided by Heizer and Render (2010), for whom Statistical Process

Adaptive inertial shock-absorber

NASA Astrophysics Data System (ADS)

Faraj, Rami; Holnicki-Szulc, Jan; Knap, Lech; Seńko, Jarosław

2016-03-01

This paper introduces and discusses a new concept of impact absorption by means of impact energy management and storage in dedicated rotating inertial discs. The effectiveness of the concept is demonstrated in a selected case-study involving spinning management, a recently developed novel impact-absorber. A specific control technique performed on this device is demonstrated to be the main source of significant improvement in the overall efficiency of impact damping process. The influence of various parameters on the performance of the shock-absorber is investigated. Design and manufacturing challenges and directions of further research are formulated.

Understanding interprofessional collaboration in the context of chronic disease management for older adults living in communities: a concept analysis.

PubMed

Bookey-Bassett, Sue; Markle-Reid, Maureen; Mckey, Colleen A; Akhtar-Danesh, Noori

2017-01-01

To report a concept analysis of interprofessional collaboration in the context of chronic disease management, for older adults living in communities. Increasing prevalence of chronic disease among older adults is creating significant burden for patients, families and healthcare systems. Managing chronic disease for older adults living in the community requires interprofessional collaboration across different health and other care providers, organizations and sectors. However, there is a lack of consensus about the definition and use of interprofessional collaboration for community-based chronic disease management. Concept analysis. Electronic databases CINAHL, Medline, HealthStar, EMBASE, PsychINFO, Ageline and Cochrane Database were searched from 2000 - 2013. Rodgers' evolutionary method for concept analysis. The most common surrogate term was interdisciplinary collaboration. Related terms were interprofessional team, multidisciplinary team and teamwork. Attributes included: an evolving interpersonal process; shared goals, decision-making and care planning; interdependence; effective and frequent communication; evaluation of team processes; involving older adults and family members in the team; and diverse and flexible team membership. Antecedents comprised: role awareness; interprofessional education; trust between team members; belief that interprofessional collaboration improves care; and organizational support. Consequences included impacts on team composition and function, care planning processes and providers' knowledge, confidence and job satisfaction. Interprofessional collaboration is a complex evolving concept. Key components of interprofessional collaboration in chronic disease management for community-living older adults are identified. Implications for nursing practice, education and research are proposed. © 2016 John Wiley & Sons Ltd.

The Personal Software Process: Downscaling the factory

NASA Technical Reports Server (NTRS)

Roy, Daniel M.

1994-01-01

It is argued that the next wave of software process improvement (SPI) activities will be based on a people-centered paradigm. The most promising such paradigm, Watts Humphrey's personal software process (PSP), is summarized and its advantages are listed. The concepts of the PSP are shown also to fit a down-scaled version of Basili's experience factory. The author's data and lessons learned while practicing the PSP are presented along with personal experience, observations, and advice from the perspective of a consultant and teacher for the personal software process.

Integration of membrane distillation into traditional salt farming method: Process development and modelling

NASA Astrophysics Data System (ADS)

Hizam, S.; Bilad, M. R.; Putra, Z. A.

2017-10-01

Farmers still practice the traditional salt farming in many regions, particularly in Indonesia. This archaic method not only produces low yield and poor salt quality, it is also laborious. Furthermore, the farming locations typically have poor access to fresh water and are far away from electricity grid, which restrict upgrade to a more advanced technology for salt production. This paper proposes a new concept of salt harvesting method that improves the salt yield and at the same time facilitates recovery of fresh water from seawater. The new concept integrates solar powered membrane distillation (MD) and photovoltaic cells to drive the pumping. We performed basic solar still experiments to quantify the heat flux received by a pond. The data were used as insight for designing the proposed concept, particularly on operational strategy and the most effective way to integrate MD. After the conceptual design had been developed, we formulated mass and energy balance to estimate the performance of the proposed concept. Based on our data and design, it is expected that the system would improve the yield and quality of the salt production, maximizing fresh water harvesting, and eventually provides economical gain for salt farmers hence improving their quality of life. The key performance can only be measured via experiment using gain output ratio as performance indicator, which will be done in a future study.

Health literacy and health communication

PubMed Central

2010-01-01

Health communication consists of interpersonal or mass communication activities focused on improving the health of individuals and populations. Skills in understanding and applying information about health issues are critical to this process and may have a substantial impact on health behaviors and health outcomes. These skills have recently been conceptualized in terms of health literacy (HL). This article introduces current concepts and measurements of HL, and discusses the role of HL in health communication, as well as future research directions in this domain. Studies of HL have increased dramatically during the past few years, but a gap between the conceptual definition of HL and its application remains. None of the existing instruments appears to completely measure the concept of HL. In particular, studies on communication/interaction and HL remain limited. Furthermore, HL should be considered not only in terms of the characteristics of individuals, but also in terms of the interactional processes between individuals and their health and social environments. Improved HL may enhance the ability and motivation of individuals to find solutions to both personal and public health problems, and these skills could be used to address various health problems throughout life. The process underpinning HL involves empowerment, one of the major goals of health communication. PMID:21054840

Advanced Hydrogen Liquefaction Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Joseph; Kromer, Brian; Neu, Ben

2011-09-28

The project identified and quantified ways to reduce the cost of hydrogen liquefaction, and reduce the cost of hydrogen distribution. The goal was to reduce the power consumption by 20% and then to reduce the capital cost. Optimizing the process, improving process equipment, and improving ortho-para conversion significantly reduced the power consumption of liquefaction, but by less than 20%. Because the efficiency improvement was less than the target, the program was stopped before the capital cost was addressed. These efficiency improvements could provide a benefit to the public to improve the design of future hydrogen liquefiers. The project increased themore » understanding of hydrogen liquefaction by modeling different processes and thoroughly examining ortho-para separation and conversion. The process modeling provided a benefit to the public because the project incorporated para hydrogen into the process modeling software, so liquefaction processes can be modeled more accurately than using only normal hydrogen. Adding catalyst to the first heat exchanger, a simple method to reduce liquefaction power, was identified, analyzed, and quantified. The demonstrated performance of ortho-para separation is sufficient for at least one identified process concept to show reduced power cost when compared to hydrogen liquefaction processes using conventional ortho-para conversion. The impact of improved ortho-para conversion can be significant because ortho para conversion uses about 20-25% of the total liquefaction power, but performance improvement is necessary to realize a substantial benefit. Most of the energy used in liquefaction is for gas compression. Improvements in hydrogen compression will have a significant impact on overall liquefier efficiency. Improvements to turbines, heat exchangers, and other process equipment will have less impact.« less

Evolutionary process development towards next generation crystalline silicon solar cells : a semiconductor process toolbox application

NASA Astrophysics Data System (ADS)

John, J.; Prajapati, V.; Vermang, B.; Lorenz, A.; Allebe, C.; Rothschild, A.; Tous, L.; Uruena, A.; Baert, K.; Poortmans, J.

2012-08-01

Bulk crystalline Silicon solar cells are covering more than 85% of the world's roof top module installation in 2010. With a growth rate of over 30% in the last 10 years this technology remains the working horse of solar cell industry. The full Aluminum back-side field (Al BSF) technology has been developed in the 90's and provides a production learning curve on module price of constant 20% in average. The main reason for the decrease of module prices with increasing production capacity is due to the effect of up scaling industrial production. For further decreasing of the price per wattpeak silicon consumption has to be reduced and efficiency has to be improved. In this paper we describe a successive efficiency improving process development starting from the existing full Al BSF cell concept. We propose an evolutionary development includes all parts of the solar cell process: optical enhancement (texturing, polishing, anti-reflection coating), junction formation and contacting. Novel processes are benchmarked on industrial like baseline flows using high-efficiency cell concepts like i-PERC (Passivated Emitter and Rear Cell). While the full Al BSF crystalline silicon solar cell technology provides efficiencies of up to 18% (on cz-Si) in production, we are achieving up to 19.4% conversion efficiency for industrial fabricated, large area solar cells with copper based front side metallization and local Al BSF applying the semiconductor toolbox.

The advantages of the high voltage solar array for electric propulsion

NASA Technical Reports Server (NTRS)

Sater, B. L.

1973-01-01

The high voltage solar array offers improvements in efficiency, weight, and reliability for the electric propulsion power system. Conventional power processes and problems associated with ion thruster operation using SERT 2 experience are discussed and the advantages of the HVSA concept for electric propulsion are presented. Tests conducted operating the SERT 2 thruster system in conjunction with HVSA are reported. Thruster operation was observed to be normal and in some respects improved.

Process mapping as a framework for performance improvement in emergency general surgery.

PubMed

DeGirolamo, Kristin; D'Souza, Karan; Hall, William; Joos, Emilie; Garraway, Naisan; Sing, Chad Kim; McLaughlin, Patrick; Hameed, Morad

2017-12-01

Emergency general surgery conditions are often thought of as being too acute for the development of standardized approaches to quality improvement. However, process mapping, a concept that has been applied extensively in manufacturing quality improvement, is now being used in health care. The objective of this study was to create process maps for small bowel obstruction in an effort to identify potential areas for quality improvement. We used the American College of Surgeons Emergency General Surgery Quality Improvement Program pilot database to identify patients who received nonoperative or operative management of small bowel obstruction between March 2015 and March 2016. This database, patient charts and electronic health records were used to create process maps from the time of presentation to discharge. Eighty-eight patients with small bowel obstruction (33 operative; 55 nonoperative) were identified. Patients who received surgery had a complication rate of 32%. The processes of care from the time of presentation to the time of follow-up were highly elaborate and variable in terms of duration; however, the sequences of care were found to be consistent. We used data visualization strategies to identify bottlenecks in care, and they showed substantial variability in terms of operating room access. Variability in the operative care of small bowel obstruction is high and represents an important improvement opportunity in general surgery. Process mapping can identify common themes, even in acute care, and suggest specific performance improvement measures.

Process mapping as a framework for performance improvement in emergency general surgery.

PubMed

DeGirolamo, Kristin; D'Souza, Karan; Hall, William; Joos, Emilie; Garraway, Naisan; Sing, Chad Kim; McLaughlin, Patrick; Hameed, Morad

2018-02-01

Emergency general surgery conditions are often thought of as being too acute for the development of standardized approaches to quality improvement. However, process mapping, a concept that has been applied extensively in manufacturing quality improvement, is now being used in health care. The objective of this study was to create process maps for small bowel obstruction in an effort to identify potential areas for quality improvement. We used the American College of Surgeons Emergency General Surgery Quality Improvement Program pilot database to identify patients who received nonoperative or operative management of small bowel obstruction between March 2015 and March 2016. This database, patient charts and electronic health records were used to create process maps from the time of presentation to discharge. Eighty-eight patients with small bowel obstruction (33 operative; 55 nonoperative) were identified. Patients who received surgery had a complication rate of 32%. The processes of care from the time of presentation to the time of follow-up were highly elaborate and variable in terms of duration; however, the sequences of care were found to be consistent. We used data visualization strategies to identify bottlenecks in care, and they showed substantial variability in terms of operating room access. Variability in the operative care of small bowel obstruction is high and represents an important improvement opportunity in general surgery. Process mapping can identify common themes, even in acute care, and suggest specific performance improvement measures.

Consumer-driven definition of traditional food products and innovation in traditional foods. A qualitative cross-cultural study.

PubMed

Guerrero, Luis; Guàrdia, Maria Dolors; Xicola, Joan; Verbeke, Wim; Vanhonacker, Filiep; Zakowska-Biemans, Sylwia; Sajdakowska, Marta; Sulmont-Rossé, Claire; Issanchou, Sylvie; Contel, Michele; Scalvedi, M Luisa; Granli, Britt Signe; Hersleth, Margrethe

2009-04-01

Traditional food products (TFP) are an important part of European culture, identity, and heritage. In order to maintain and expand the market share of TFP, further improvement in safety, health, or convenience is needed by means of different innovations. The aim of this study was to obtain a consumer-driven definition for the concept of TFP and innovation and to compare these across six European countries (Belgium, France, Italy, Norway, Poland and Spain) by means of semantic and textual statistical analyses. Twelve focus groups were performed, two per country, under similar conditions. The transcriptions obtained were submitted to an ordinary semantic analysis and to a textual statistical analysis using the software ALCESTE. Four main dimensions were identified for the concept of TFP: habit-natural, origin-locality, processing-elaboration and sensory properties. Five dimensions emerged around the concept of innovation: novelty-change, variety, processing-technology, origin-ethnicity and convenience. TFP were similarly perceived in the countries analysed, while some differences were detected for the concept of innovation. Semantic and statistical analyses of the focus groups led to similar results for both concepts. In some cases and according to the consumers' point of view the application of innovations may damage the traditional character of TFP.

More Clever than the Devil: "Ujanja" as Schooling Strategy in Tanzania

ERIC Educational Resources Information Center

Vavrus, Frances

2015-01-01

This article explores the concept of "cleverness" as it is employed by Tanzanian youth to improve their likelihood of succeeding in school. It analyzes the Swahili term "ujanja," which combines cleverness, opportunism, and deception, while it also illustrates an educational anthropologist's ongoing process of familiarization…

Jetfighter: An Experiential Value Chain Exercise

ERIC Educational Resources Information Center

Sheehan, Norman T.; Gamble, Edward N.

2010-01-01

Value chain analysis is widely taught in business schools and applied by practitioners to improve business performance. Despite its ubiquity, many students struggle to understand and apply value chain concepts in practice. JetFighter uses a complex manufacturing process (making intricate paper planes) to provide students an opportunity to enhance…

Development of Facilities for an Ocean Engineering Laboratory. Final Report.

ERIC Educational Resources Information Center

Nash, W. A.; And Others

A collection of seven laboratory facilities and processes dedicated to improving student understanding of the fundamental concepts associated with the structural mechanics of oceanic structures is described. Complete working drawings covering all mechanical and electrical aspects of these systems are presented so that the systems may be reproduced…

76 FR 72220 - Incorporation of Risk Management Concepts in Regulatory Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... and support the adoption of improved designs or processes. \\1\\ A deterministic approach to regulation... longstanding goal to move toward more risk-informed, performance- based approaches in its regulatory programs... regulatory approach that would continue to ensure the safe and secure use of nuclear material. As part of...

Total Teacher Effectiveness: Implication for Curriculum Change (TOC) in Hong Kong.

ERIC Educational Resources Information Center

Tsui, Kwok Tung; Cheng, Yin Cheong

This paper introduces the concept of total teacher effectiveness for facilitating educational reform and improvement, using target oriented curriculum (TOC) change in Hong Kong as an example. TOC change is a complex process that involves preparing, changing, and reinforcing teachers in multiple domains at multiple levels. Teacher effectiveness…

Conference of Remote Sensing Educators (CORSE-78)

NASA Technical Reports Server (NTRS)

1978-01-01

Ways of improving the teaching of remote sensing students at colleges and universities are discussed. Formal papers and workshops on various Earth resources disciplines, image interpretation, and data processing concepts are presented. An inventory of existing remote sensing and related subject courses being given in western regional universities is included.

Spelling. English Language Arts Concept Paper Number 3.

ERIC Educational Resources Information Center

Mazzio, Frank

Noting research suggesting that something more than rote memorization is involved in the process of spelling, this paper describes effective instructional strategies to help students improve their spelling abilities. Following an introduction on the memorization/cognition camps in spelling research, the paper discusses current, but less effective,…

Diffusion Activities in College Laboratory Manuals

ERIC Educational Resources Information Center

Tweedy, Maryanne E.; Hoese, William J.

2005-01-01

Many have called for reform of the science curriculum to incorporate the process of inquiry: this has been shown to improve student understanding of biological concepts. Laboratory activities provide excellent opportunities to incorporate inquiry in to the curriculum. This study used a modified version of the Laboratory Task Analysis Instrument…

Managing Risk in Systems Development.

ERIC Educational Resources Information Center

DePaoli, Marilyn M.; And Others

Stanford University's use of a risk assessment methodology to improve the management of systems development projects is discussed. After examining the concepts of hazard, peril, and risk as they relate to the system development process, three ways to assess risk are covered: size, structure, and technology. The overall objective for Stanford…

Examining Conceptions of How People Learn over the Decades through AERA Presidential Addresses: Diversity and Equity as Persistent Conundrums

ERIC Educational Resources Information Center

Lee, Carol D.

2016-01-01

The mission statement of the American Educational Research Association (AERA) articulates the following goals: "improving the educational process," "advancing knowledge about education," "[encouraging] scholarly inquiry related to education," and "[promoting] the use of research ... to serve the public…

Art Isn't Easy . . . but It Makes Learning Easier: Using Art to Improve Cognition

ERIC Educational Resources Information Center

Wachter, Michael; Kirkwood-Mazik, Heather

2015-01-01

This paper describes an innovative assignment in which students associate marketing concepts with artwork from a specified photographic exhibit. During the encoding process, linking various topics with pieces of art activates high-involvement learning, creative elaboration, and analytical reasoning. Consequently, students experience higher levels…

MEDRank: using graph-based concept ranking to index biomedical texts

PubMed Central

Herskovic, Jorge R.; Cohen, Trevor; Subramanian, Devika; Iyengar, M. Sriram; Smith, Jack W.; Bernstam, Elmer V.

2011-01-01

BACKGROUND As the volume of biomedical text increases exponentially, automatic indexing becomes increasingly important. However, existing approaches do not distinguish central (or core) concepts from concepts that were mentioned in passing. We focus on the problem of indexing MEDLINE records, a process that is currently performed by highly-trained humans at the National Library of Medicine (NLM). NLM indexers are assisted by a system called the Medical Text Indexer (MTI) that suggests candidate indexing terms. OBJECTIVE To improve the ability of MTI to select the core terms in MEDLINE abstracts. These core concepts are deemed to be most important and are designated as “major headings” by MEDLINE indexers. We introduce and evaluate a graph-based indexing methodology called MEDRank that generates concept graphs from biomedical text and then ranks the concepts within these graphs to identify the most important ones. METHODS We insert a MEDRank step into the MTI and compare MTI’s output with and without MEDRank to the MEDLINE indexers’ selected terms for a sample of 11,803 PubMed Central articles. We also tested whether human raters prefer terms generated by the MEDLINE indexers, MTI without MEDRank, and MTI with MEDRank for a sample of 36 PubMed Central articles. RESULTS MEDRank improved recall of major headings designated by 30% over MTI without MEDRank (0.489 vs 0.376). Overall recall was only slightly (6.5%) higher (0.490 vs 0.460) as was F2 (3%, 0.408 vs 0.396). However, overall precision was 3.9% lower (0.268 vs 0.279). Human raters preferred terms generated by MTI with MEDRank over terms generated by MTI without MEDRank (by an average of 1.00 more term per article), and preferred terms generated by MTI with MEDRank and the MEDLINE indexers at the same rate. CONCLUSIONS The addition of MEDRank to MTI significantly improved the retrieval of core concepts in MEDLINE abstracts and more closely matched human expectations compared to MTI without MEDRank. In addition, MEDRank slightly improved overall recall and F2. PMID:21439897

MEDRank: using graph-based concept ranking to index biomedical texts.

PubMed

Herskovic, Jorge R; Cohen, Trevor; Subramanian, Devika; Iyengar, M Sriram; Smith, Jack W; Bernstam, Elmer V

2011-06-01

As the volume of biomedical text increases exponentially, automatic indexing becomes increasingly important. However, existing approaches do not distinguish central (or core) concepts from concepts that were mentioned in passing. We focus on the problem of indexing MEDLINE records, a process that is currently performed by highly trained humans at the National Library of Medicine (NLM). NLM indexers are assisted by a system called the Medical Text Indexer (MTI) that suggests candidate indexing terms. To improve the ability of MTI to select the core terms in MEDLINE abstracts. These core concepts are deemed to be most important and are designated as "major headings" by MEDLINE indexers. We introduce and evaluate a graph-based indexing methodology called MEDRank that generates concept graphs from biomedical text and then ranks the concepts within these graphs to identify the most important ones. We insert a MEDRank step into the MTI and compare MTI's output with and without MEDRank to the MEDLINE indexers' selected terms for a sample of 11,803 PubMed Central articles. We also tested whether human raters prefer terms generated by the MEDLINE indexers, MTI without MEDRank, and MTI with MEDRank for a sample of 36 PubMed Central articles. MEDRank improved recall of major headings designated by 30% over MTI without MEDRank (0.489 vs. 0.376). Overall recall was only slightly (6.5%) higher (0.490 vs. 0.460) as was F(2) (3%, 0.408 vs. 0.396). However, overall precision was 3.9% lower (0.268 vs. 0.279). Human raters preferred terms generated by MTI with MEDRank over terms generated by MTI without MEDRank (by an average of 1.00 more term per article), and preferred terms generated by MTI with MEDRank and the MEDLINE indexers at the same rate. The addition of MEDRank to MTI significantly improved the retrieval of core concepts in MEDLINE abstracts and more closely matched human expectations compared to MTI without MEDRank. In addition, MEDRank slightly improved overall recall and F(2). Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Factors affecting the effectiveness of biomedical document indexing and retrieval based on terminologies.

PubMed

Dinh, Duy; Tamine, Lynda; Boubekeur, Fatiha

2013-02-01

The aim of this work is to evaluate a set of indexing and retrieval strategies based on the integration of several biomedical terminologies on the available TREC Genomics collections for an ad hoc information retrieval (IR) task. We propose a multi-terminology based concept extraction approach to selecting best concepts from free text by means of voting techniques. We instantiate this general approach on four terminologies (MeSH, SNOMED, ICD-10 and GO). We particularly focus on the effect of integrating terminologies into a biomedical IR process, and the utility of using voting techniques for combining the extracted concepts from each document in order to provide a list of unique concepts. Experimental studies conducted on the TREC Genomics collections show that our multi-terminology IR approach based on voting techniques are statistically significant compared to the baseline. For example, tested on the 2005 TREC Genomics collection, our multi-terminology based IR approach provides an improvement rate of +6.98% in terms of MAP (mean average precision) (p<0.05) compared to the baseline. In addition, our experimental results show that document expansion using preferred terms in combination with query expansion using terms from top ranked expanded documents improve the biomedical IR effectiveness. We have evaluated several voting models for combining concepts issued from multiple terminologies. Through this study, we presented many factors affecting the effectiveness of biomedical IR system including term weighting, query expansion, and document expansion models. The appropriate combination of those factors could be useful to improve the IR performance. Copyright © 2012 Elsevier B.V. All rights reserved.

Concept maps: A tool for knowledge management and synthesis in web-based conversational learning.

PubMed

Joshi, Ankur; Singh, Satendra; Jaswal, Shivani; Badyal, Dinesh Kumar; Singh, Tejinder

2016-01-01

Web-based conversational learning provides an opportunity for shared knowledge base creation through collaboration and collective wisdom extraction. Usually, the amount of generated information in such forums is very huge, multidimensional (in alignment with the desirable preconditions for constructivist knowledge creation), and sometimes, the nature of expected new information may not be anticipated in advance. Thus, concept maps (crafted from constructed data) as "process summary" tools may be a solution to improve critical thinking and learning by making connections between the facts or knowledge shared by the participants during online discussion This exploratory paper begins with the description of this innovation tried on a web-based interacting platform (email list management software), FAIMER-Listserv, and generated qualitative evidence through peer-feedback. This process description is further supported by a theoretical construct which shows how social constructivism (inclusive of autonomy and complexity) affects the conversational learning. The paper rationalizes the use of concept map as mid-summary tool for extracting information and further sense making out of this apparent intricacy.

From Metacognition to Practice Cognition: The DNP e-Portfolio to Promote Integrated Learning.

PubMed

Anderson, Kelley M; DesLauriers, Patricia; Horvath, Catherine H; Slota, Margaret; Farley, Jean Nelson

2017-08-01

Educating Doctor of Nursing Practice (DNP) students for an increasingly complex health care environment requires novel applications of learning concepts and technology. A deliberate and thoughtful process is required to integrate concepts of the DNP program into practice paradigm changes to subsequently improve students' abilities to innovate solutions to complex practice problems. The authors constructed or participated in electronic portfolio development inspired by theories of metacognition and integrated learning. The objective was to develop DNP student's reflection, integration of concepts, and technological capabilities to foster the deliberative competencies related to the DNP Essentials and the foundations of the DNP program. The pedagogical process demonstrates how e-portfolios adapted into the doctoral-level curriculum for DNP students can address the Essentials and foster the development of metacognitive capabilities, which translates into practice changes. The authors suggest that this pedagogical approach has the potential to optimize reflective and deliberative competencies among DNP students. [J Nurs Educ. 2017;56(8):497-500.]. Copyright 2017, SLACK Incorporated.

Diagnostic of students' misconceptions using the Biological Concepts Instrument (BCI): A method for conducting an educational needs assessment

PubMed Central

Champagne Queloz, Annie; Klymkowsky, Michael W.; Stern, Elsbeth; Hafen, Ernst; Köhler, Katja

2017-01-01

Concept inventories, constructed based on an analysis of students’ thinking and their explanations of scientific situations, serve as diagnostics for identifying misconceptions and logical inconsistencies and provide data that can help direct curricular reforms. In the current project, we distributed the Biological Concepts Instrument (BCI) to 17-18-year-old students attending the highest track of the Swiss school system (Gymnasium). Students’ performances on many questions related to evolution, genetics, molecular properties and functions were diverse. Important common misunderstandings were identified in the areas of evolutionary processes, molecular properties and an appreciation of stochastic processes in biological systems. Our observations provide further evidence that the BCI is efficient in identifying specific areas where targeted instruction is required. Based on these observations we have initiated changes at several levels to reconsider how biological systems are presented to university biology studies with the goal of improving student’s foundational understanding. PMID:28493960

Exploring Student-Generated Animations, Combined with a Representational Pedagogy, as a Tool for Learning in Chemistry

NASA Astrophysics Data System (ADS)

Yaseen, Zeynep; Aubusson, Peter

2018-02-01

This article describes an investigation into teaching and learning with student-generated animations combined with a representational pedagogy. In particular, it reports on interactive discussions that were stimulated by the students' own animations as well as their critiques of experts' animations. Animations representing views of states of matter provided a vehicle by which to investigate learning in a series of lessons. The study was implemented with Year 11 high school students. After students constructed, presented and discussed their animations, they watched and critiqued experts' animations. They were then interviewed about the teaching-learning process. Most students (91%) spoke positively about follow-up discussion classes, saying that their previous conceptions and understanding of states of matter had improved. They explained that they had identified some alternative conceptions, which they had held regarding states of matter and explained how their conceptions had changed. They reported that the teaching/learning process had helped them to develop a deeper understanding of the changing states of matter.

a New Initiative for Tiling, Stitching and Processing Geospatial Big Data in Distributed Computing Environments

NASA Astrophysics Data System (ADS)

Olasz, A.; Nguyen Thai, B.; Kristóf, D.

2016-06-01

Within recent years, several new approaches and solutions for Big Data processing have been developed. The Geospatial world is still facing the lack of well-established distributed processing solutions tailored to the amount and heterogeneity of geodata, especially when fast data processing is a must. The goal of such systems is to improve processing time by distributing data transparently across processing (and/or storage) nodes. These types of methodology are based on the concept of divide and conquer. Nevertheless, in the context of geospatial processing, most of the distributed computing frameworks have important limitations regarding both data distribution and data partitioning methods. Moreover, flexibility and expendability for handling various data types (often in binary formats) are also strongly required. This paper presents a concept for tiling, stitching and processing of big geospatial data. The system is based on the IQLib concept (https://github.com/posseidon/IQLib/) developed in the frame of the IQmulus EU FP7 research and development project (http://www.iqmulus.eu). The data distribution framework has no limitations on programming language environment and can execute scripts (and workflows) written in different development frameworks (e.g. Python, R or C#). It is capable of processing raster, vector and point cloud data. The above-mentioned prototype is presented through a case study dealing with country-wide processing of raster imagery. Further investigations on algorithmic and implementation details are in focus for the near future.

From a Reductionist to a Holistic Approach in Preventive Nutrition to Define New and More Ethical Paradigms

PubMed Central

Fardet, Anthony; Rock, Edmond

2015-01-01

This concept paper intends to define four new paradigms for improving nutrition research. First, the consequences of applying a reductionist versus a holistic approach to nutrition science will be discussed. The need for a more focused preventive nutrition approach, as opposed to a curative one, will then be presented on the basis of the ‘healthy core metabolism’ concept. This will lead us to propose a new classification of food products based on processing for future epidemiological studies. As a result of applying the holistic approach, health food potential will be redefined based on both food structure and nutrient density. These new paradigms should help define a more ethical preventive nutrition for humans to improve public recommendations while preserving the environment. PMID:27417812

Understanding situation awareness and its importance in patient safety.

PubMed

Gluyas, Heather; Harris, Sarah-Jane

2016-04-20

Situation awareness describes an individual's perception, comprehension and subsequent projection of what is going on in the environment around them. The concept of situation awareness sits within the group of non-technical skills that include teamwork, communication and managing hierarchical lines of communication. The importance of non-technical skills has been recognised in safety-critical industries such as aviation, the military, nuclear, and oil and gas. However, health care has been slow to embrace the role of non-technical skills such as situation awareness in improving outcomes and minimising the risk of error. This article explores the concept of situation awareness and the cognitive processes involved in maintaining it. In addition, factors that lead to a loss of situation awareness and strategies to improve situation awareness are discussed.

From a Reductionist to a Holistic Approach in Preventive Nutrition to Define New and More Ethical Paradigms.

PubMed

Fardet, Anthony; Rock, Edmond

2015-10-28

This concept paper intends to define four new paradigms for improving nutrition research. First, the consequences of applying a reductionist versus a holistic approach to nutrition science will be discussed. The need for a more focused preventive nutrition approach, as opposed to a curative one, will then be presented on the basis of the 'healthy core metabolism' concept. This will lead us to propose a new classification of food products based on processing for future epidemiological studies. As a result of applying the holistic approach, health food potential will be redefined based on both food structure and nutrient density. These new paradigms should help define a more ethical preventive nutrition for humans to improve public recommendations while preserving the environment.

Analysis of digester design concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashare, E.; Wilson, E. H.

1979-01-29

Engineering economic analyses were performed on various digester design concepts to determine the relative performance for various biomass feedstocks. A comprehensive literature survey describing the state-of-the-art of the various digestion designs is included. The digester designs included in the analyses are CSTR, plug flow, batch, CSTR in series, multi-stage digestion and biomethanation. Other process options investigated included pretreatment processes such as shredding, degritting, and chemical pretreatment, and post-digestion processes, such as dewatering and gas purification. The biomass sources considered include feedlot manure, rice straw, and bagasse. The results of the analysis indicate that the most economical (on a unit gasmore » cost basis) digester design concept is the plug flow reactor. This conclusion results from this system providing a high gas production rate combined with a low capital hole-in-the-ground digester design concept. The costs determined in this analysis do not include any credits or penalties for feedstock or by-products, but present the costs only for conversion of biomass to methane. The batch land-fill type digester design was shown to have a unit gas cost comparable to that for a conventional stirred tank digester, with the potential of reducing the cost if a land-fill site were available for a lower cost per unit volume. The use of chemical pretreatment resulted in a higher unit gas cost, primarily due to the cost of pretreatment chemical. A sensitivity analysis indicated that the use of chemical pretreatment could improve the economics provided a process could be developed which utilized either less pretreatment chemical or a less costly chemical. The use of other process options resulted in higher unit gas costs. These options should only be used when necessary for proper process performance, or to result in production of a valuable by-product.« less

[Quality assurance and quality improvement. Personal experiences and intentions].

PubMed

Roche, B G; Sommer, C

1995-01-01

In may 1994 we were selected by the surgical Swiss association to make a study about quality in USA. During our travel we visited 3 types of institutions: Hospitals, National Institute of standard and Technology, Industry, Johnson & Johnson. We appreciate to compare 2 types of quality programs: Quality Assurance (QA) and Continuous Quality Improvement (CQI). In traditional healthcare circles, QA is the process established to meet external regulatory requirements and to assure that patient care is consistent with established standards. In a modern quality terms, QA outside of healthcare means designing a product or service, as well as controlling its production, so well that quality is inevitable. The ideas of W. Edward Deming is that there is never improvement just by inspection. He developed a theory based on 14 principles. A productive work is accomplished through processes. Understanding the variability of processes is a key to improve quality. Quality management sees each person in an organisation as part of one or more processes. The job of every worker is to receive the work of others, add value to that work, and supply it to the next person in the process. This is called the triple role the workers as customer, processor, and supplier. The main source of quality defects is problems in the process. The old assumption is that quality fails when people do the right thing wrong; the new assumption is that, more often, quality failures arise when people do the wrong think right. Exhortation, incentives and discipline of workers are unlikely to improve quality. If quality is failing when people do their jobs as designed, then exhorting them to do better is managerial nonsense. Modern quality theory is customer focused. Customers are identified internally and externally. The modern approach to quality is thoroughly grounded in scientific and statistical thinking. Like in medicine, the symptom is a defect in quality. The therapist of process must perform diagnostic test, formulate hypotheses of cause, test those hypotheses, apply remedies, and assess the effect of remedies. Total employee involvement is critical. A power comes from enabling all employees to become involved in quality improvement. A great advantage of CQI is the prevention orientation of the concept. The CQI permeated a collegial approach, people learn how to work together to improve. CQI is a time consuming procedure. During our travel we learned the definition of quality as the customer satisfaction. To build a CQI concept in employed time but all employed are involved in quality improvement. Applying CQI we could be able to refuse Quality control programs.

Unsupervised method for automatic construction of a disease dictionary from a large free text collection.

PubMed

Xu, Rong; Supekar, Kaustubh; Morgan, Alex; Das, Amar; Garber, Alan

2008-11-06

Concept specific lexicons (e.g. diseases, drugs, anatomy) are a critical source of background knowledge for many medical language-processing systems. However, the rapid pace of biomedical research and the lack of constraints on usage ensure that such dictionaries are incomplete. Focusing on disease terminology, we have developed an automated, unsupervised, iterative pattern learning approach for constructing a comprehensive medical dictionary of disease terms from randomized clinical trial (RCT) abstracts, and we compared different ranking methods for automatically extracting con-textual patterns and concept terms. When used to identify disease concepts from 100 randomly chosen, manually annotated clinical abstracts, our disease dictionary shows significant performance improvement (F1 increased by 35-88%) over available, manually created disease terminologies.

A New Conception of Bucket Wheel Excavator Cab and Seat Mounting

NASA Astrophysics Data System (ADS)

Blekta, J.; Mevald, J.; Petríková, I.; Petříček, J.; Lufinka, A.

One of the most important problem of coal mining by bucket wheel excavators is how to minimize influence of vibrations on driver's body. Project of Ministry of Trade and Industry of the Czech Republic solved in Technical University of Liberec was engaged in this problem. The aim of this project was to design a new cab and seat mounting of wheel excavator Schrs 1320. A suitable possibilities of cab suspensions were investigated to minimize driver body vibrations and to improve influence of mining process to drivers health. After optimization one concept was chosen. A new methodic of measured data evaluation was created for using in excavators as well as in laboratory. The new concept of dynamic seat absorber were designed also.

Unsupervised Method for Automatic Construction of a Disease Dictionary from a Large Free Text Collection

PubMed Central

Xu, Rong; Supekar, Kaustubh; Morgan, Alex; Das, Amar; Garber, Alan

2008-01-01

Concept specific lexicons (e.g. diseases, drugs, anatomy) are a critical source of background knowledge for many medical language-processing systems. However, the rapid pace of biomedical research and the lack of constraints on usage ensure that such dictionaries are incomplete. Focusing on disease terminology, we have developed an automated, unsupervised, iterative pattern learning approach for constructing a comprehensive medical dictionary of disease terms from randomized clinical trial (RCT) abstracts, and we compared different ranking methods for automatically extracting contextual patterns and concept terms. When used to identify disease concepts from 100 randomly chosen, manually annotated clinical abstracts, our disease dictionary shows significant performance improvement (F1 increased by 35–88%) over available, manually created disease terminologies. PMID:18999169

Key challenges in future Li-battery research.

PubMed

Tarascon, J-M

2010-07-28

Batteries are a major technological challenge in this new century as they are a key method to make more efficient use of energy. Although today's Li-ion technology has conquered the portable electronic markets and is still improving, it falls short of meeting the demands dictated by the powering of both hybrid electric vehicles and electric vehicles or by the storage of renewable energies (wind, solar). There is room for optimism as long as we pursue paradigm shifts while keeping in mind the concept of materials sustainability. Some of these concepts, relying on new ways to prepare electrode materials via eco-efficient processes, on the use of organic rather than inorganic materials or new chemistries will be discussed. Achieving these concepts will require the inputs of multiple disciplines.

Therapeutic communication in nursing students: A Walker & Avant concept analysis

PubMed Central

Abdolrahimi, Mahbobeh; Ghiyasvandian, Shahrzad; Zakerimoghadam, Masoumeh; Ebadi, Abbas

2017-01-01

Background and aim Therapeutic communication, the fundamental component of nursing, is a complex concept. Furthermore, the poor encounters between nursing student and patient demonstrate the necessity of instruction regarding therapeutic communication. The aim of this study was to define and clarify this important concept for including this subject in the nursing curriculum with more emphasis. Methods A literature search was conducted using keywords such as “nursing student”, “patient” and “therapeutic communication” and Persian-equivalent words in Persian databases (including Magiran and Medlib) and English databases (including PubMed, ScienceDirect, Scopus and ProQuest) without time limitation. After extracting concept definitions and determining characteristic features, therapeutic communication in nursing students was defined. Then, sample cases, antecedents, consequences and empirical referents of concept were determined. Results After assessing 30 articles, therapeutic communication defining attributes were as follows: “an important means in building interpersonal relationships”, “a process of information transmission”, “an important clinical competency”, “a structure with two different sections” and “a significant tool in patient centered care”. Furthermore, theoretical and clinical education and receiving educators’ feedback regarding therapeutic communication were considered as antecedents of the concept. Improving physical and psychological health status of patient as well as professional development of nursing students were identified as consequences of the concept. Conclusion Nursing instructors can use these results in order to teach and evaluate therapeutic communication in nursing students and train qualified nurses. Also, nursing students may apply the results to improve the quality of their interactions with patients, perform their various duties and meet patients’ diverse needs. PMID:28979730

Using new media to build social capital for health: a qualitative process evaluation study of participation in the CityNet project.

PubMed

Bolam, Bruce; McLean, Carl; Pennington, Andrew; Gillies, Pamela

2006-03-01

The present article presents an exploratory qualitative process evaluation study of 'Ambassador' participation in CityNet, an innovative information-communication technology-based (ICT) project that aims to build aspects of social capital and improve access to information and services among disadvantaged groups in Nottingham, UK. A purposive sample of 40 'Ambassadors' interviewees was gathered in three waves of data collection. The two emergent analytic themes highlighted how improvements in confidence, self-esteem and social networks produced via participation were mitigated by structural problems in devolving power within the project. This illustrates how concepts of power are important for understanding the process of health promotion interventions using new media.

Using New Technologies: A Technology Transfer Guidebook. Version 02.00. 08

DTIC Science & Technology

1993-12-01

Barton (1990) and Pressman (1992), depend on the concept that improving your overall technology transfer process decreases the amount of time it takes to...Evolutionary Spiral Process Any enactment of the evolutionary spiral model (ESP) which is an adaptation of the basic spiral model pro- posed by Barry Boehm...Innovations in Organizations, 1989 CMU/SEI-89-TR-17, (also NTIS ADA211573). Pittsburgh, Pennsylvania: Software Engineering Institute. Boehm, Barry A

A Lean Approach to Improving SE Visibility in Large Operational Systems Evolution

DTIC Science & Technology

2013-06-01

large health care system of systems. To enhance both visibility and flow, the approach utilizes visualization techniques, pull-scheduling processes...development processes. This paper describes an example implementation of the concept in a large health care system of systems. To enhance both visibility...and then provides the results to the requestor as soon as available. Hospital System Information Support Development The health care SoS is a set

How to achieve and prove performance improvement - 15 years of experience in German wastewater benchmarking.

PubMed

Bertzbach, F; Franz, T; Möller, K

2012-01-01

This paper shows the results of performance improvement, which have been achieved in benchmarking projects in the wastewater industry in Germany over the last 15 years. A huge number of changes in operational practice and also in achieved annual savings can be shown, induced in particular by benchmarking at process level. Investigation of this question produces some general findings for the inclusion of performance improvement in a benchmarking project and for the communication of its results. Thus, we elaborate on the concept of benchmarking at both utility and process level, which is still a necessary distinction for the integration of performance improvement into our benchmarking approach. To achieve performance improvement via benchmarking it should be made quite clear that this outcome depends, on one hand, on a well conducted benchmarking programme and, on the other, on the individual situation within each participating utility.

Modeling Early-Stage Processes of U-10 Wt.%Mo Alloy Using Integrated Computational Materials Engineering Concepts

NASA Astrophysics Data System (ADS)

Wang, Xiaowo; Xu, Zhijie; Soulami, Ayoub; Hu, Xiaohua; Lavender, Curt; Joshi, Vineet

2017-12-01

Low-enriched uranium alloyed with 10 wt.% molybdenum (U-10Mo) has been identified as a promising alternative to high-enriched uranium. Manufacturing U-10Mo alloy involves multiple complex thermomechanical processes that pose challenges for computational modeling. This paper describes the application of integrated computational materials engineering (ICME) concepts to integrate three individual modeling components, viz. homogenization, microstructure-based finite element method for hot rolling, and carbide particle distribution, to simulate the early-stage processes of U-10Mo alloy manufacture. The resulting integrated model enables information to be passed between different model components and leads to improved understanding of the evolution of the microstructure. This ICME approach is then used to predict the variation in the thickness of the Zircaloy-2 barrier as a function of the degree of homogenization and to analyze the carbide distribution, which can affect the recrystallization, hardness, and fracture properties of U-10Mo in subsequent processes.

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

Clinical audit in dentistry: From a concept to an initiation.

PubMed

Malleshi, Suchetha N; Joshi, Mahasweta; Nair, Soumya K; Ashraf, Irshad

2012-11-01

Clinical audit is a quality improvement process that aims to improve patient care through a systematic review of care against explicit criteria. It is a cyclic and multidisciplinary process which involves a series of steps from planning the audit through measuring the performance to implementing and sustaining the change. Although audit contains some facets of research, it is essential to understand the difference between the two. Auditing can be done right from the record maintaining, diagnosis and treatment and postoperative evaluation and follow-up. The immense potential of clinical audit can be utilized only when open-mindedness and innovativeness are encouraged and evidence-based work culture is cultivated.

Stand-alone and biorefinery pathways to produce hydrogen through gasification and dark fermentation using Pinus Patula.

PubMed

García, Carlos A; Betancourt, Ramiro; Cardona, Carlos A

2017-12-01

New efforts in the search of alternative clean and renewable energy to replace the current energy precursors have been assessed in order to reduce emissions to the environment. Lignocellulosic Biomass (LB) can be used to produce bioenergy due to its high energy potential and availability. Different ways are proposed for the transformation of these residues into high added-value products. Thermochemical and biochemical technologies are the most interest concepts focusing on the use of biomass as source for energy production at positive net balances. This study presents the techno-economic, energy and environmental assessment of five scenarios for the hydrogen production through gasification and dark fermentation based on the biorefinery and stand-alone concepts. The results demonstrated that the production of hydrogen based on the concept of a biorefinery can improve the profitability, energy efficiency and reduce the emissions of the processes compared to that based on the stand-alone way. The selection of ethanol and electricity as valuable co-products of the biorefinery in the hydrogen production process confirmed that the process scale and products diversity makes possible a flexible and suitable process to produce hydrogen and other energy carriers from Pinus Patula. Copyright © 2016 Elsevier Ltd. All rights reserved.

How improved access to healthcare was successfully spread across Sweden.

PubMed

Strindhall, Margareta; Henriks, Göran

2007-01-01

Swedish healthcare has an internationally high standard, but is often criticized from a patient perspective owing to access problems to primary and specialist care. The waiting time to get in touch or get an appointment with a doctor, nurse, or physiotherapist is often too long. Access problems also create stress for employees when there are too few appointments to offer. In addition, too much time gets spent on the administration of long waiting lists, which adds no value to patients. Jönköping County Council was not satisfied with this situation and decided to make an attempt to improve access in the whole system. To describe how access was improved in Jönköping County council and how the concept was spread nationally. A conceptual model for improved access and reduced queues in Jönköping County called Bra Mottagning (BM) ("Good Clinic" in Swedish) was developed in 1999. It was built on logistic principles and collaborative learning. The program consisted of 4 learning sessions over a period of 8 to 9 months. The process of learning, team development, leadership, and spread of a change concept for improved access in Sweden has evolved through repeated improvement cycles, from small tests to larger pilots and finally to a standardized concept. Since 1999, 2 new BM collaboratives have been started every year. The first 11 teams from the county council of Jönköping, which participated in BM1 to BM3, reduced their median waiting time from 90 to 7 days in 8 months, an improvement of 93% (83 days). The results have been sustainable over the last 7 years. In the county council as a system, advanced access was achieved in 40% of the 179 units in 2006. Since the national spread started, 2200 employees in 316 professional teams from 16 county councils in Sweden have participated in BM collaboratives. Of these, 80% improved access for their patients and 32% reached advanced access in 8 months. The described development and spread of a concept for improved access in Sweden has been successful. A general impression is that the spread was more successful in the counties where the top management was strongly committed to the mission and the concept. Important factors for the national spread have been the establishment of a broader planning group as a network, the education of access coaches, the standardization of methods, and scientific assessments of the concept. Our experience is that both leaders and employees need to share a holistic view and systems thinking and also develop a deep interest in learning about strategies for access improvement.

Analysis of chemical concepts as the basic of virtual laboratory development and process science skills in solubility and solubility product subject

NASA Astrophysics Data System (ADS)

Syafrina, R.; Rohman, I.; Yuliani, G.

2018-05-01

This study aims to analyze the concept characteristics of solubility and solubility products that will serve as the basis for the development of virtual laboratory and students' science process skills. Characteristics of the analyzed concepts include concept definitions, concept attributes, and types of concepts. The concept analysis method uses concept analysis according to Herron. The results of the concept analysis show that there are twelve chemical concepts that become the prerequisite concept before studying the solubility and solubility and five core concepts that students must understand in the solubility and Solubility product. As many as 58.3% of the definitions of the concepts contained in high school textbooks support students' science process skills, the rest of the definition of the concept is memorized. Concept attributes that meet three levels of chemical representation and can be poured into a virtual laboratory have a percentage of 66.6%. Type of concept, 83.3% is a concept based on principle; and 16.6% concepts that state the process. Meanwhile, the science process skills that can be developed based on concept analysis are the ability to observe, calculate, measure, predict, interpret, hypothesize, apply, classify, and inference.

Improvement of pump tubes for gas guns and shock tube drivers

NASA Technical Reports Server (NTRS)

Bogdanoff, D. W.

1990-01-01

In a pump tube, a gas is mechanically compressed, producing very high pressures and sound speeds. The intensely heated gas produced in such a tube can be used to drive light gas guns and shock tubes. Three concepts are presented that have the potential to allow substantial reductions in the size and mass of the pump tube to be achieved. The first concept involves the use of one or more diaphragms in the pump tube, thus replacing a single compression process by multiple, successive compressions. The second concept involves a radical reduction in the length-to-diameter ratio of the pump tube and the pump tube piston. The third concept involves shock heating of the working gas by high explosives in a cyclindrical geometry reusable device. Preliminary design analyses are performed on all three concepts and they appear to be quite feasible. Reductions in the length and mass of the pump tube by factors up to about 11 and about 7, respectively, are predicted, relative to a benchmark conventional pump tube.

Improving the medical records department processes by lean management

PubMed Central

Ajami, Sima; Ketabi, Saeedeh; Sadeghian, Akram; Saghaeinnejad-Isfahani, Sakine

2015-01-01

Background: Lean management is a process improvement technique to identify waste actions and processes to eliminate them. The benefits of Lean for healthcare organizations are that first, the quality of the outcomes in terms of mistakes and errors improves. The second is that the amount of time taken through the whole process significantly improves. Aims: The purpose of this paper is to improve the Medical Records Department (MRD) processes at Ayatolah-Kashani Hospital in Isfahan, Iran by utilizing Lean management. Materials and Methods: This research was applied and an interventional study. The data have been collected by brainstorming, observation, interview, and workflow review. The study population included MRD staff and other expert staff within the hospital who were stakeholders and users of the MRD. Statistical Analysis Used: The MRD were initially taught the concepts of Lean management and then formed into the MRD Lean team. The team then identified and reviewed the current processes subsequently; they identified wastes and values, and proposed solutions. Results: The findings showed that the MRD units (Archive, Coding, Statistics, and Admission) had 17 current processes, 28 wastes, and 11 values were identified. In addition, they offered 27 comments for eliminating the wastes. Conclusion: The MRD is the critical department for the hospital information system and, therefore, the continuous improvement of its services and processes, through scientific methods such as Lean management, are essential. Originality/Value: The study represents one of the few attempts trying to eliminate wastes in the MRD. PMID:26097862

Programmed iron oxide nanoparticles disintegration in anaerobic digesters boosts biogas production.

PubMed

Casals, Eudald; Barrena, Raquel; García, Ana; González, Edgar; Delgado, Lucía; Busquets-Fité, Martí; Font, Xavier; Arbiol, Jordi; Glatzel, Pieter; Kvashnina, Kristina; Sánchez, Antoni; Puntes, Víctor

2014-07-23

A novel concept of dosing iron ions using Fe3O4 engineered nanoparticles is used to improve biogas production in anaerobic digestion processes. Since small nanoparticles are unstable, they can be designed to provide ions in a controlled manner, and the highest ever reported improvement of biogas production is obtained. The nanoparticles evolution during operation is followed by an array of spectroscopic techniques. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tungsten Contact and Line Resistance Reduction with Advanced Pulsed Nucleation Layer and Low Resistivity Tungsten Treatment

NASA Astrophysics Data System (ADS)

Chandrashekar, Anand; Chen, Feng; Lin, Jasmine; Humayun, Raashina; Wongsenakhum, Panya; Chang, Sean; Danek, Michal; Itou, Takamasa; Nakayama, Tomoo; Kariya, Atsushi; Kawaguchi, Masazumi; Hizume, Shunichi

2010-09-01

This paper describes electrical testing results of new tungsten chemical vapor deposition (CVD-W) process concepts that were developed to address the W contact and bitline scaling issues on 55 nm node devices. Contact resistance (Rc) measurements in complementary metal oxide semiconductor (CMOS) devices indicate that the new CVD-W process for sub-32 nm and beyond - consisting of an advanced pulsed nucleation layer (PNL) combined with low resistivity tungsten (LRW) initiation - produces a 20-30% drop in Rc for diffused NiSi contacts. From cross-sectional bright field and dark field transmission electron microscopy (TEM) analysis, such Rc improvement can be attributed to improved plugfill and larger in-feature W grain size with the advanced PNL+LRW process. More experiments that measured contact resistance for different feature sizes point to favorable Rc scaling with the advanced PNL+LRW process. Finally, 40% improvement in line resistance was observed with this process as tested on 55 nm embedded dynamic random access memory (DRAM) devices, confirming that the advanced PNL+LRW process can be an effective metallization solution for sub-32 nm devices.

Improving outcomes using German Inpatient Quality Indicators in conjunction with peer review procedures.

PubMed

Mansky, Thomas; Völzke, Tatjana; Nimptsch, Ulrike

2015-01-01

Some hospital comparisons seem to generate confusion because different methods of outcome comparisons lead to different results in hospital rankings. This article questions the concept of overall comparisons of hospitals, which are multiproduct enterprises and may have specialties that provide good results in some areas despite having worse outcomes in others. Therefore, the authors argue for a disease specific view of outcome measurement. The concept of the German Inpatient Quality Indicators is explained. These indicators cover volume, mortality, and other information by a disease specific approach, which includes information for potential patients as well as specific feedback to the physicians responsible for the respective specialty. This article focuses on the feedback to the hospitals and explains how these indicators can be used for improvement in conjunction with a peer review process. The indicators provide information to the hospitals regarding their relative position because German reference values are available for all indicators. Thus, the indicators can serve as a trigger instrument for identifying possible quality problems. Based on these indications, peer review can be used to analyze the treatment processes and to eventually verify weaknesses and define actions for improvement. The first studies indicate that the use of this approach within hospital quality management can largely improve hospital outcomes in hospitals with subpar results compared to the German average. Copyright © 2015. Published by Elsevier GmbH.

Are pharmacological interventions between conception and birth effective in improving reproductive outcomes in North American swine?

PubMed

Wessels, J M; Khalaj, K; Kridli, R T; Edwards, A K; Bidarimath, M; Tayade, C

2014-08-01

The objective of this review is to evaluate the effectiveness of using pharmacological compounds on reproductive outcomes, particularly litter size, in North American swine. While the opportunity to improve reproduction in North American pigs exists, numerous hurdles need to be overcome in order to achieve measureable results. In the swine industry, the majority of piglet losses are incurred during pregnancy and around farrowing. Over the last 20 years, a reduction in losses has been achieved through genetic selection and nutritional management; however, these topics are the focus of other reviews. This review will evaluate attempts to improve litter size by reducing losses at various stages of the reproductive process, from the time of conception to the time of farrowing, using pharmacological compounds. Generally, these compounds are used to either alter physiological processes related to fertilization, embryonic attachment or uterine capacity, etc., or to facilitate management aspects of the breeding females such as inducing parturition. Although some of the pharmacological agents reviewed here show some positive effects on improving reproductive parameters, the inconsistent results and associated risks usually outweigh the benefits gained. Thus, at the present time, the use of pharmacological agents to enhance reproduction in North American swine may only be recommended for herds with low fertility and presents an avenue of research that could be further explored. © 2014 Blackwell Verlag GmbH.

Can branding by health care provider organizations drive the delivery of higher technical and service quality?

PubMed

Snihurowych, Roman R; Cornelius, Felix; Amelung, Volker Eric

2009-01-01

Despite the widespread use of branding in nearly all other major industries, most health care service delivery organizations have not fully embraced the practices and processes of branding. Facilitating the increased and appropriate use of branding among health care delivery organizations may improve service and technical quality for patients. This article introduces the concepts of branding, as well as making the case that the use of branding may improve the quality and financial performance of organizations. The concepts of branding are reviewed, with examples from the literature used to demonstrate their potential application within health care service delivery. The role of branding for individual organizations is framed by broader implications for health care markets. Branding strategies may have a number of positive effects on health care service delivery, including improved technical and service quality. This may be achieved through more transparent and efficient consumer choice, reduced costs related to improved patient retention, and improved communication and appropriateness of care. Patient satisfaction may be directly increased as a result of branding. More research into branding could result in significant quality improvements for individual organizations, while benefiting patients and the health system as a whole.

Transforming Patient-Centered Care: Development of the Evidence Informed Decision Making through Engagement Model.

PubMed

Moore, Jennifer E; Titler, Marita G; Kane Low, Lisa; Dalton, Vanessa K; Sampselle, Carolyn M

2015-01-01

In response to the passage of the Affordable Care Act in the United States, clinicians and researchers are critically evaluating methods to engage patients in implementing evidence-based care to improve health outcomes. However, most models on implementation only target clinicians or health systems as the adopters of evidence. Patients are largely ignored in these models. A new implementation model that captures the complex but important role of patients in the uptake of evidence may be a critical missing link. Through a process of theory evaluation and development, we explore patient-centered concepts (patient activation and shared decision making) within an implementation model by mapping qualitative data from an elective induction of labor study to assess the model's ability to capture these key concepts. The process demonstrated that a new, patient-centered model for implementation is needed. In response, the Evidence Informed Decision Making through Engagement Model is presented. We conclude that, by fully integrating women into an implementation model, outcomes that are important to both the clinician and patient will improve. In the interest of providing evidence-based care to women during pregnancy and childbirth, it is essential that care is patient centered. The inclusion of concepts discussed in this article has the potential to extend beyond maternity care and influence other clinical areas. Utilizing the newly developed Evidence Informed Decision Making through Engagement Model provides a framework for utilizing evidence and translating it into practice while acknowledging the important role that women have in the process. Published by Elsevier Inc.

Developing an Interdisciplinary, Team-Based Quality Improvement Leadership Training Program for Clinicians: The Partners Clinical Process Improvement Leadership Program.

PubMed

Rao, Sandhya K; Carballo, Victoria; Cummings, Brian M; Millham, Frederick; Jacobson, Joseph O

Although there has been tremendous progress in quality improvement (QI) education for students and trainees in recent years, much less has been published regarding the training of active clinicians in QI. The Partners Clinical Process Improvement Leadership Program (CPIP) is a 6-day experiential program. Interdisciplinary teams complete a QI project framed by didactic sessions, interactive exercises, case-based problem sessions, and a final presentation. A total of 239 teams composed of 516 individuals have graduated CPIP. On completion, participant satisfaction scores average 4.52 (scale 1-5) and self-reported understanding of QI concepts improved. At 6 months after graduation, 66% of survey respondents reported sustained QI activity. Three opportunities to improve the program have been identified: (1) increasing faculty participation through online and tiered course offerings, (2) integrating the faculty-focused program with the trainee curriculum, and (3) developing a postgraduate curriculum to address the challenges of sustained improvement.

Unlocking the riddle of time in learning disability.

PubMed

Owen, Ann L; Wilson, Rebecca R

2006-03-01

People with learning disabilities often have difficulties understanding abstract concepts such as the concept of time yet research in this area is scarce. Not only does the development of an understanding of the concept of time enable us to predict future events, order past events and give us a sense of control over current events, it also serves to contribute to the very essence of our understanding of a sense of ourselves. It seems reasonable to suggest that the converse may be true for people who are not able to develop this concept. Time perception and understanding are complex cognitive processes. It is suggested that facilitating this development and managing associated difficulties may be achieved by focusing on the practical applications of time in everyday life. Improving time perception abilities may reduce feelings of powerlessness and anxiety and increase feelings of self-efficacy but research is needed to evaluate this.

Concepts for the development of nanoscale stable precipitation-strengthened steels manufactured by conventional methods

DOE PAGES

Yablinsky, C. A.; Tippey, K. E.; Vaynman, S.; ...

2014-11-11

In this study, the development of oxide dispersion strengthened ferrous alloys has shown that microstructures designed for excellent irradiation resistance and thermal stability ideally contain stable nanoscale precipitates and dislocation sinks. Based upon this understanding, the microstructures of conventionally manufactured ferritic and ferritic-martensitic steels can be designed to include controlled volume fractions of fine, stable precipitates and dislocation sinks via specific alloying and processing paths. The concepts proposed here are categorized as advanced high-Cr ferritic-martensitic (AHCr-FM) and novel tailored precipitate ferritic (TPF) steels, which have the potential to improve the in-reactor performance of conventionally manufactured alloys. AHCr-FM steels have modifiedmore » alloy content relative to current reactor materials (such as alloy NF616/P92) to maximize desirable precipitates and control phase stability. TPF steels are designed to incorporate nickel aluminides, in addition to microalloy carbides, in a ferritic matrix to produce fine precipitate arrays with good thermal stability. Both alloying concepts may also benefit from thermomechanical processing to establish dislocation sinks and modify phase transformation behaviors. Alloying and processing paths toward designed microstructures are discussed for both AHCr-FM and TPF material classes.« less

A techno-economic comparison of fuel processors utilizing diesel for solid oxide fuel cell auxiliary power units

NASA Astrophysics Data System (ADS)

Nehter, Pedro; Hansen, John Bøgild; Larsen, Peter Koch

Ultra-low sulphur diesel (ULSD) is the preferred fuel for mobile auxiliary power units (APU). The commercial available technologies in the kW-range are combustion engine based gensets, achieving system efficiencies about 20%. Solid oxide fuel cells (SOFC) promise improvements with respect to efficiency and emission, particularly for the low power range. Fuel processing methods i.e., catalytic partial oxidation, autothermal reforming and steam reforming have been demonstrated to operate on diesel with various sulphur contents. The choice of fuel processing method strongly affects the SOFC's system efficiency and power density. This paper investigates the impact of fuel processing methods on the economical potential in SOFC APUs, taking variable and capital cost into account. Autonomous concepts without any external water supply are compared with anode recycle configurations. The cost of electricity is very sensitive on the choice of the O/C ratio and the temperature conditions of the fuel processor. A sensitivity analysis is applied to identify the most cost effective concept for different economic boundary conditions. The favourite concepts are discussed with respect to technical challenges and requirements operating in the presence of sulphur.

Applying Authentic Data Analysis in Learning Earth Atmosphere

NASA Astrophysics Data System (ADS)

Johan, H.; Suhandi, A.; Samsudin, A.; Wulan, A. R.

2017-09-01

The aim of this research was to develop earth science learning material especially earth atmosphere supported by science research with authentic data analysis to enhance reasoning through. Various earth and space science phenomenon require reasoning. This research used experimental research with one group pre test-post test design. 23 pre-service physics teacher participated in this research. Essay test was conducted to get data about reason ability. Essay test was analyzed quantitatively. Observation sheet was used to capture phenomena during learning process. The results showed that student’s reasoning ability improved from unidentified and no reasoning to evidence based reasoning and inductive/deductive rule-based reasoning. Authentic data was considered using Grid Analysis Display System (GrADS). Visualization from GrADS facilitated students to correlate the concepts and bring out real condition of nature in classroom activity. It also helped student to reason the phenomena related to earth and space science concept. It can be concluded that applying authentic data analysis in learning process can help to enhance students reasoning. This study is expected to help lecture to bring out result of geoscience research in learning process and facilitate student understand concepts.

Digital Twin concept for smart injection molding

NASA Astrophysics Data System (ADS)

Liau, Y.; Lee, H.; Ryu, K.

2018-03-01

Injection molding industry has evolved over decades and became the most common method to manufacture plastic parts. Monitoring and improvement in the injection molding industry are usually performed separately in each stage, i.e. mold design, mold making and injection molding process. However, in order to make a breakthrough and survive in the industrial revolution, all the stages in injection molding need to be linked and communicated with each other. Any changes in one stage will cause a certain effect in other stage because there is a correlation between each other. Hence, the simulation should not only based on the input of historical data, but it also needs to include the current condition of equipment and prediction of future events in other stages to make the responsive decision. This can be achieved by implementing the concept of Digital Twin that models the entire process as a virtual model and enables bidirectional control with the physical process. This paper presented types of data and technology required to build the Digital Twin for the injection molding industry. The concept includes Digital Twin of each stage and integration of these Digital Twin model as a thoroughgoing model of the injection molding industry.

Improvement of Automated POST Case Success Rate Using Support Vector Machines

NASA Technical Reports Server (NTRS)

Zwack, Mathew R.; Dees, Patrick D.

2017-01-01

During early conceptual design of complex systems, concept down selection can have a large impact upon program life-cycle cost. Therefore, any concepts selected during early design will inherently commit program costs and affect the overall probability of program success. For this reason it is important to consider as large a design space as possible in order to better inform the down selection process. For conceptual design of launch vehicles, trajectory analysis and optimization often presents the largest obstacle to evaluating large trade spaces. This is due to the sensitivity of the trajectory discipline to changes in all other aspects of the vehicle design. Small deltas in the performance of other subsystems can result in relatively large fluctuations in the ascent trajectory because the solution space is non-linear and multi-modal. In order to help capture large design spaces for new launch vehicles, the authors have performed previous work seeking to automate the execution of the industry standard tool, Program to Optimize Simulated Trajectories (POST). This work initially focused on implementation of analyst heuristics to enable closure of cases in an automated fashion, with the goal of applying the concepts of design of experiments (DOE) and surrogate modeling to enable near instantaneous throughput of vehicle cases.3 As noted in [4] work was then completed to improve the DOE process by utilizing a graph theory based approach to connect similar design points.

Nanocrystals of medium soluble actives--novel concept for improved dermal delivery and production strategy.

PubMed

Zhai, Xuezhen; Lademann, Jürgen; Keck, Cornelia M; Müller, Rainer H

2014-08-15

After use in oral pharmaceutical products, nanocrystals are meanwhile applied to improve the dermal penetration of cosmetic actives (e.g. rutin, hesperidin) and of drugs. By now, nanocrystals are only dermally applied made from poorly soluble actives. The novel concept is to formulate nanocrystals also from medium soluble actives, and to apply a dermal formulation containing additionally nanocrystals. The nanocrystals should act as fast dissolving depot, increase saturation solubility and especially accumulate in the hair follicles, to further increase skin penetration. Caffeine was used as model compound with relevance to market products, and a particular process was developed for the production of caffeine nanocrystals to overcome the supersaturation related effect of crystal growth and fiber formation - typical with medium soluble compounds. It is based on low energy milling (pearl milling) in combination with low dielectric constant dispersion media (water-ethanol or ethanol-propylene glycol mixtures) and optimal stabilizers. Most successful was Carbopol(®) 981 (e.g. 20% caffeine in ethanol-propylene glycol 3:7 with 2% Carbopol, w/w). Nanocrystals with varied sizes can now be produced in a controlled process e.g. 660 nm (optimal for hair follicle accumulation) to 250 nm (optimal for fast dissolution). The short term test proved stability over 2 months of the present formulation being sufficient to perform in vivo testing of the novel concept. Copyright © 2014 Elsevier B.V. All rights reserved.

Infusion of innovative technologies for mission operations

NASA Astrophysics Data System (ADS)

Donati, Alessandro

2010-11-01

The Advanced Mission Concepts and Technologies Office (Mission Technologies Office, MTO for short) at the European Space Operations Centre (ESOC) of ESA is entrusted with research and development of innovative mission operations concepts systems and provides operations support to special projects. Visions of future missions and requests for improvements from currently flying missions are the two major sources of inspiration to conceptualize innovative or improved mission operations processes. They include monitoring and diagnostics, planning and scheduling, resource management and optimization. The newly identified operations concepts are then proved by means of prototypes, built with embedded, enabling technology and deployed as shadow applications in mission operations for an extended validation phase. The technology so far exploited includes informatics, artificial intelligence and operational research branches. Recent outstanding results include artificial intelligence planning and scheduling applications for Mars Express, advanced integrated space weather monitoring system for the Integral space telescope and a suite of growing client applications for MUST (Mission Utilities Support Tools). The research, development and validation activities at the Mission technologies office are performed together with a network of research institutes across Europe. The objective is narrowing the gap between enabling and innovative technology and space mission operations. The paper first addresses samples of technology infusion cases with their lessons learnt. The second part is focused on the process and the methodology used at the Mission technologies office to fulfill its objectives.

See what we say: using concept mapping to visualize Latino immigrant's strategies for health interventions.

PubMed

Vaughn, Lisa M; Jacquez, Farrah; Marschner, Daniel; McLinden, Daniel

2016-09-01

Researchers need specific tools to engage community members in health intervention development to ensure that efforts are contextually appropriate for immigrant populations. The purpose of the study was to generate and prioritize strategies to address obesity, stress and coping, and healthcare navigation that are contextually appropriate and applicable to the Latino immigrant community in Cincinnati, Ohio, and then use the results to develop specific interventions to improve Latino health in our area. A community-academic research team used concept mapping methodology with over 200 Latino immigrants and Latino-serving providers. A community intervention planning session was held to share the final concept maps and vote on strategies. The concept maps and results from the intervention planning session emphasized a community lay health worker model to connect the Latino immigrant community with resources to address obesity, stress and coping, and healthcare navigation. Concept maps allowed for the visualization of health intervention strategies prioritized by the larger Latino immigrant community. Concept maps revealed the appropriate content for health interventions as well as the process community members preferred for intervention delivery.

Enhancing the Student Learning Experience: The Perspective of Academic Staff

ERIC Educational Resources Information Center

Cahill, Jo; Turner, Jan; Barefoot, Helen

2010-01-01

Background: Quality enhancement in higher education is essentially a planned process of change that leads to continuous improvement in the effectiveness of the learning experience of students and the students' experience of higher education. Published literature that explores the concept in the reality of practice is sparse. Purpose: The overall…

In-Class Simulation of Pooling Safety Stock

ERIC Educational Resources Information Center

Bandy, D. Brent

2005-01-01

In managing business process flows, safety stock can be used to protect against stockouts due to demand variability. When more than one location is involved, the concept of aggregation enables the pooling of demands and associated inventories, resulting in improved service levels without increasing the total level of safety stock. This pooling of…

Development of Ideas in a GeoGebra-Aided Mathematics Instruction

ERIC Educational Resources Information Center

Ljajko, Eugen; Ibro, Vait

2013-01-01

With GeoGebra introduced into mathematics instruction the teaching/learning process is not improved in terms of speed and quality only. Mathematical concepts, rules and procedures must be adjusted to the new environment. On the other hand, characteristics of the computer and the educational software in use must be thoroughly examined and a…

Distributive Leadership, Civic Engagement, and Deliberative Democracy as Vehicles for School Improvement

ERIC Educational Resources Information Center

Fusarelli, Lance D.; Kowalski, Theodore J.; Petersen, George J.

2011-01-01

Elements of directed autonomy were visible in public education long before the concept had been defined in the scholarly literature on organizational management. Most notably, states established common curricula and adequacy standards and then held local school boards accountable for compliance. Civic engagement, a liberty-based process through…

Organizational Performance Improvement in Higher Education Student Affairs: A Phenomenographic Study

ERIC Educational Resources Information Center

Froehlich, Jill Carrie Menk

2011-01-01

The aim of this study was to gain a better understanding of the experiences of student services staff in a midwestern university during an organizational change: implementation of quality practices and principles. The experiences were captured as they reflected during the interview process. The interview data were organized into 35 concepts from…

Improving Early Reading and Literacy: A Guide for Developing Research-Based Programs.

ERIC Educational Resources Information Center

St. John, Edward P.; Bardzell, Jeffrey S.

This guide is designed to help school communities make good choices about early literacy intervention. The guide distinguishes between "reading" (a process of learning to decode and comprehend texts) and a broader concept of "literacy" that includes understanding of the value of language and reading (emergent literacy), the…

Improving the Laboratory Learning Experience: A Process to Train and Manage Teaching Assistants

ERIC Educational Resources Information Center

Nikolic, Sasha; Vial, Peter James; Ros, Montserrat; Stirling, David; Ritz, Christian

2015-01-01

This paper describes in detail a successful training program developed for sessional (part-time or nonpermanent) laboratory demonstrators employed in the Electrical Engineering Department of an Australian university. Such demonstrators play an important role in teaching practical concepts and skills in engineering. The success of the program…

A Conceptual Framework for the Electronic Performance Support Systems within IBM Lotus Notes 6 (LN6) Example

ERIC Educational Resources Information Center

Bayram, Servet

2005-01-01

The concept of Electronic Performance Support Systems (EPSS) is containing multimedia or computer based instruction components that improves human performance by providing process simplification, performance information and decision support system. EPSS has become a hot topic for organizational development, human resources, performance technology,…

Deafness, Thought Bubbles, and Theory-of-Mind Development

ERIC Educational Resources Information Center

Wellman, Henry M.; Peterson, Candida C.

2013-01-01

The processes and mechanisms of theory-of-mind development were examined via a training study of false-belief conceptions in deaf children of hearing parents (N = 43). In comparison to 2 different control conditions, training based on thought-bubble instruction about beliefs was linked with improved false-belief understanding as well as progress…

The Quest for an Ecosomatic Approach to Dance Pedagogy

ERIC Educational Resources Information Center

Enghauser, Rebecca

2007-01-01

As a dance teacher I am interested in finding ways to improve the quality and effectiveness of the dancers' learning process. My investigations toward this end have primarily focused on uncovering essential somatic characteristics as they relate to dance teaching and learning. The essential somatic concept that the senses and sensitization of the…

Enhancing E-Learning Quality through the Application of the AKUE Procedure Model

ERIC Educational Resources Information Center

Bremer, C.

2012-01-01

The paper describes the procedure model AKUE, which aims at the improvement and assurance of quality and cost efficiency in the context of the introduction of e-learning and the development of digital learning material. AKUE divides the whole planning and implementation process into four different phases: analysis, conception, implementation, and…

Education through Movies: Improving Teaching Skills and Fostering Reflection among Students and Teachers

ERIC Educational Resources Information Center

Blasco, Pablo Gonzalez; Moreto, Graziela; Blasco, Mariluz González; Levites, Marcelo Rozenfeld; Janaudis, Marco Aurelio

2015-01-01

Learning through aesthetics--in which cinema is included--stimulates learner reflection. As emotions play key roles in learning attitudes and changing behavior, teachers must impact learners affective domain. Since feelings exist before concepts, the affective path is a critical path to the rational process of learning. Cinema is the audiovisual…

Improving Student Writing through E-Mail Mentoring

ERIC Educational Resources Information Center

Burns, Mary

2006-01-01

Computer technology has become an indispensable tool in writing. Those of us who have spent any time in schools can attest to the prevalence of word processing, concept mapping, Web editing, and electronic presentation software, all deployed, to a large extent, in the collective effort to enhance student writing. The degree to which such tools…

The productive operating theatre and lean thinking systems.

PubMed

Kasivisvanathan, R; Chekairi, A

2014-11-01

The concept of 'lean thinking' first originated in the manufacturing industry as a means of improving productivity whilst maintaining quality through eliminating wasteful processes. The purpose of this article is to demonstrate how the principles of 'lean thinking' are relevant to healthcare and the operating theatre, with reference to our own institutional experience.

Educational Policy Diffusion and Transfer: The Case of Armenia

ERIC Educational Resources Information Center

Karakhanyan, Susanna; van Veen, Klaas; Bergen, Theo

2011-01-01

This paper explores the quality of the implementation of the West European Bologna reforms in higher education in a post-soviet country. This process of policy diffusion is analysed using concepts of policy diffusion/transfer and innovation literature, attempting to combine both streams of literature. Despite strong motivation to improve the…

When Learning Analytics Meets E-Learning

ERIC Educational Resources Information Center

Czerkawski, Betul C.

2015-01-01

While student data systems are nothing new and most educators have been dealing with student data for many years, learning analytics has emerged as a new concept to capture educational big data. Learning analytics is about better understanding of the learning and teaching process and interpreting student data to improve their success and learning…

Structured Strategy for Implementation of the Teaching Portfolio Concept in Japan

ERIC Educational Resources Information Center

Kurita, Kayoko

2013-01-01

This paper describes a strategy for successfully implementing the teaching portfolio in higher education institutions in Japan. The teaching portfolio has gained recognition in Japan in the last few years as an effective instrument for improving and showcasing teaching performance. It is well known that the implementation process is very important…

Character Education: A Relationship with Building Health

ERIC Educational Resources Information Center

Crider, Robert B.

2012-01-01

The purpose of the study is to investigate the relationship between the use of character education programming and school health. Measuring and improving school health is a process that supports social, emotional, ethical and civic education. Hoy, Tarter, and Kottkamp define this concept as a healthy school is one in which the institutional,…

Brain Embodiment of Syntax and Grammar: Discrete Combinatorial Mechanisms Spelt Out in Neuronal Circuits

ERIC Educational Resources Information Center

Pulvermuller, Friedemann

2010-01-01

Neuroscience has greatly improved our understanding of the brain basis of abstract lexical and semantic processes. The neuronal devices underlying words and concepts are distributed neuronal assemblies reaching into sensory and motor systems of the cortex and, at the cognitive level, information binding in such widely dispersed circuits is…

Addressing Misconceptions in Geometry through Written Error Analyses

ERIC Educational Resources Information Center

Kembitzky, Kimberle A.

2009-01-01

This study examined the improvement of students' comprehension of geometric concepts through analytical writing about their own misconceptions using a reflective tool called an ERNIe (acronym for ERror aNalyIsis). The purpose of this study was to determine whether the ERNIe process could be used to correct geometric misconceptions, as well as how…

Building an efficient supply chain.

PubMed

Scalise, Dagmara

2005-08-01

Realizing at last that supply chain management can produce efficiencies and save costs, hospitals are beginning to adopt practices from other industries, such as the concept of extended supply chains, to improve product flow. They're also investing in enterprise planning resource software, radio frequency identification and other technologies, using quality data to drive standardization and streamlining processes.

Learning with Touchscreen Devices: Game Strategies to Improve Geometric Thinking

ERIC Educational Resources Information Center

Soldano, Carlotta; Arzarello, Ferdinando

2016-01-01

The aim of this paper is to reflect on the importance of the students' game-strategic thinking during the development of mathematical activities. In particular, we hypothesise that this type of thinking helps students in the construction of logical links between concepts during the "argumentation phase" of the proving process. The…

Improving the Quality of E-Learning: Lessons from the eMM

ERIC Educational Resources Information Center

Marshall, S.

2012-01-01

The quality of e-learning can be defined in many different ways, reflecting different stakeholders and the complexity of the systems and processes used in higher education. These different conceptions of quality can be mutually contradictory and, while politically significant, may also be beyond the direct control or influence of institutional…

An Exploratory Study of Best Lean Sustainability Practices in Higher Education

ERIC Educational Resources Information Center

Comm, Clare L.; Mathaisel, Dennis F. X.

2005-01-01

Purpose: Because of the ever-expanding commercialization and marketing of higher education, a need now exists to apply the concepts of business process improvement to colleges and universities. Aims to explore this issue. Design/methodology/approach: An open-ended qualitative questionnaire was developed, administered to 18 public and private…

Supercritical fluid particle design for poorly water-soluble drugs (review).

PubMed

Sun, Yongda

2014-01-01

Supercritical fluid particle design (SCF PD) offers a number of routes to improve solubility and dissolution rate for enhancing the bioavailability of poorly water-soluble drugs, which can be adopted through an in-depth knowledge of SCF PD processes and the molecular properties of active pharmaceutical ingredients (API) and drug delivery system (DDS). Combining with research experiences in our laboratory, this review focuses on the most recent development of different routes (nano-micron particles, polymorphic particles, composite particles and bio-drug particles) to improve solubility and dissolution rate of poorly water-soluble drugs, covering the fundamental concept of SCF and the principle of SCF PD processes which are typically used to control particle size, shape, morphology and particle form and hence enable notable improvement in the dissolution rate of the poorly water-soluble drugs. The progress of the industrialization of SCF PD processes in pharmaceutical manufacturing environment with scaled-up plant under current good manufacturing process (GMP) specification is also considered in this review.

Design and Verification of Remote Sensing Image Data Center Storage Architecture Based on Hadoop

NASA Astrophysics Data System (ADS)

Tang, D.; Zhou, X.; Jing, Y.; Cong, W.; Li, C.

2018-04-01

The data center is a new concept of data processing and application proposed in recent years. It is a new method of processing technologies based on data, parallel computing, and compatibility with different hardware clusters. While optimizing the data storage management structure, it fully utilizes cluster resource computing nodes and improves the efficiency of data parallel application. This paper used mature Hadoop technology to build a large-scale distributed image management architecture for remote sensing imagery. Using MapReduce parallel processing technology, it called many computing nodes to process image storage blocks and pyramids in the background to improve the efficiency of image reading and application and sovled the need for concurrent multi-user high-speed access to remotely sensed data. It verified the rationality, reliability and superiority of the system design by testing the storage efficiency of different image data and multi-users and analyzing the distributed storage architecture to improve the application efficiency of remote sensing images through building an actual Hadoop service system.

Reducing the complexity of the software design process with object-oriented design

NASA Technical Reports Server (NTRS)

Schuler, M. P.

1991-01-01

Designing software is a complex process. How object-oriented design (OOD), coupled with formalized documentation and tailored object diagraming techniques, can reduce the complexity of the software design process is described and illustrated. The described OOD methodology uses a hierarchical decomposition approach in which parent objects are decomposed into layers of lower level child objects. A method of tracking the assignment of requirements to design components is also included. Increases in the reusability, portability, and maintainability of the resulting products are also discussed. This method was built on a combination of existing technology, teaching experience, consulting experience, and feedback from design method users. The discussed concepts are applicable to hierarchal OOD processes in general. Emphasis is placed on improving the design process by documenting the details of the procedures involved and incorporating improvements into those procedures as they are developed.

Current status and challenges for automotive battery production technologies

NASA Astrophysics Data System (ADS)

Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

2018-04-01

Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

[Cleaning and disinfection in nursing homes. Data on quality of structure, process and outcome in nursing homes in Frankfurt am Main, Germany, 2011].

PubMed

Heudorf, U; Gasteyer, S; Samoiski, Y; Voigt, K

2012-08-01

Due to the Infectious Disease Prevention Act, public health services in Germany are obliged to check the infection prevention in hospitals and other medical facilities as well as in nursing homes. In Frankfurt/Main, Germany, standardized control visits have been performed for many years. In 2011 focus was laid on cleaning and disinfection of surfaces. All 41 nursing homes were checked according to a standardized checklist covering quality of structure (i.e. staffing, hygiene concept), quality of process (observation of the cleaning processes in the homes) and quality of output, which was monitored by checking the cleaning of fluorescent marks which had been applied some days before and should have been removed via cleaning in the following days before the final check. In more than two thirds of the homes, cleaning personnel were salaried, in one third external personnel were hired. Of the homes 85% provided service clothing and all of them offered protective clothing. All homes had established hygiene and cleaning concepts, however, in 15% of the homes concepts for the handling of Norovirus and in 30% concepts for the handling of Clostridium difficile were missing. Regarding process quality only half of the processes observed, i.e. cleaning of hand contact surfaces, such as handrails, washing areas and bins, were correct. Only 44% of the cleaning controls were correct with enormous differences between the homes (0-100%). The correlation between quality of process and quality of output was significant. There was good quality of structure in the homes but regarding quality of process and outcome there was great need for improvement. This was especially due to faults in communication and coordination between cleaning personnel and nursing personnel. Quality outcome was neither associated with the number of the places for residents nor with staffing. Thus, not only quality of structure but also quality of process and outcome should be checked by the public health services.

The dynamics of team cognition: A process-oriented theory of knowledge emergence in teams.

PubMed

Grand, James A; Braun, Michael T; Kuljanin, Goran; Kozlowski, Steve W J; Chao, Georgia T

2016-10-01

Team cognition has been identified as a critical component of team performance and decision-making. However, theory and research in this domain continues to remain largely static; articulation and examination of the dynamic processes through which collectively held knowledge emerges from the individual- to the team-level is lacking. To address this gap, we advance and systematically evaluate a process-oriented theory of team knowledge emergence. First, we summarize the core concepts and dynamic mechanisms that underlie team knowledge-building and represent our theory of team knowledge emergence (Step 1). We then translate this narrative theory into a formal computational model that provides an explicit specification of how these core concepts and mechanisms interact to produce emergent team knowledge (Step 2). The computational model is next instantiated into an agent-based simulation to explore how the key generative process mechanisms described in our theory contribute to improved knowledge emergence in teams (Step 3). Results from the simulations demonstrate that agent teams generate collectively shared knowledge more effectively when members are capable of processing information more efficiently and when teams follow communication strategies that promote equal rates of information sharing across members. Lastly, we conduct an empirical experiment with real teams participating in a collective knowledge-building task to verify that promoting these processes in human teams also leads to improved team knowledge emergence (Step 4). Discussion focuses on implications of the theory for examining team cognition processes and dynamics as well as directions for future research. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Improving Science Process Skills for Primary School Students Through 5E Instructional Model-Based Learning

NASA Astrophysics Data System (ADS)

Choirunnisa, N. L.; Prabowo, P.; Suryanti, S.

2018-01-01

The main objective of this study is to describe the effectiveness of 5E instructional model-based learning to improve primary school students’ science process skills. The science process skills is important for students as it is the foundation for enhancing the mastery of concepts and thinking skills needed in the 21st century. The design of this study was experimental involving one group pre-test and post-test design. The result of this study shows that (1) the implementation of learning in both of classes, IVA and IVB, show that the percentage of learning implementation increased which indicates a better quality of learning and (2) the percentage of students’ science process skills test results on the aspects of observing, formulating hypotheses, determining variable, interpreting data and communicating increased as well.

30/20 GHz communications systems baseband processor development

NASA Astrophysics Data System (ADS)

Brown, L.; Sabourin, D.; Stilwell, J.; McCallister, R.; Borota, M.

The architecture and system design concepts for a commercial satellite communications system planned for the 1990's has been developed. The system provides data communications between the individual users via trunking and customer premise service terminals utilizing a central switching satellite operating in a time-division multiple-access mode. Baseband processing is employed to route and control traffic on an individual message basis while providing significant advantages in improved link margins and system flexibility. Key technology developments required to prove the flight readiness of the baseband processor design are being verified in the baseband processor proof-of-concept model described herein.

The concept of branding: is it relevant to nursing?

PubMed

Dominiak, Mary C

2004-10-01

This concept exploration examines branding and its relevance to nursing. Branding is used to differentiate products through use of symbols. The symbols are the brands that are designed to communicate the value of products. Nursing has had many identifying symbols, such as the nurse's cap and the white uniform, but these symbols have failed to clearly communicate the essence of nursing. Lack of a distinct nursing brand has led to confusion about the discipline. The Roy adaptation model provides a view of branding as a process for clearly defining the profession, improving its image, and differentiating its role within the healthcare milieu.

Satellite Power System (SPS) public outreach experiment

NASA Technical Reports Server (NTRS)

Mcneal, S. R.

1980-01-01

An outreach experiment was conducted to improve the results of the satellite power system (SPS) concept development and evaluation program. The objectives of the outreach were to: (1) determine the areas of major concern relative to the SPS concept and (2) gain experience with an outreach process for use in future public involvement. The response to the outreach effort was positive, suggesting that the effort extended by the SPS project division to encourage an information exchange with the public was well received. The responses were analyzed and from them some questions and answers about the satellite power system are presented.

30/20 GHz communications systems baseband processor development

NASA Technical Reports Server (NTRS)

Brown, L.; Sabourin, D.; Stilwell, J.; Mccallister, R.; Borota, M.

1982-01-01

The architecture and system design concepts for a commercial satellite communications system planned for the 1990's has been developed. The system provides data communications between the individual users via trunking and customer premise service terminals utilizing a central switching satellite operating in a time-division multiple-access mode. Baseband processing is employed to route and control traffic on an individual message basis while providing significant advantages in improved link margins and system flexibility. Key technology developments required to prove the flight readiness of the baseband processor design are being verified in the baseband processor proof-of-concept model described herein.

Competence-Based Approach in Value Chain Processes

NASA Astrophysics Data System (ADS)

Azevedo, Rodrigo Cambiaghi; D'Amours, Sophie; Rönnqvist, Mikael

There is a gap between competence theory and value chain processes frameworks. While individually considered as core elements in contemporary management thinking, the integration of the two concepts is still lacking. We claim that this integration would allow for the development of more robust business models by structuring value chain activities around aspects such as capabilities and skills, as well as individual and organizational knowledge. In this context, the objective of this article is to reduce this gap and consequently open a field for further improvements of value chain processes frameworks.

The role of business process reengineering in health care.

PubMed

Kohn, D

1994-02-01

Business process reengineering (BPR) is a management philosophy capturing attention in health care. It combines some new, old, and recycled management philosophies, and, more often than not, is yielding positive results. BPR's emphasis is on the streamlining of cross-functional processes to significantly reduce time and/or cost, increase revenue, improve quality and service, and reduce risk. Therefore, it has many applications in health care. This article provides an introduction to the concept of BPR, including the definition of BPR, its origin, its champions, and factors for its success.

Translational science: past, present, and future.

PubMed

Curry, Stephen H

2008-02-01

The concept of translational science is at least 15 years old. However, in its most recent incarnation, it represents the identification of a funding category designed to encourage academic participation in a critical stage of the drug discovery and product development process. It is hoped that this will make the process both shorter and more efficient. In this review, the author first considers the historical development of the pharmaceutical R&D process. The place of translational science in the process, the scientific techniques involved, and aspects of the business environment necessary for its success are then considered. Translational science does not displace preclinical development. Both concepts are relevant to the paramount importance of successfully and expeditiously bridging the gap between preclinical science and clinical testing, "from bench to bedside." Translational science is particularly likely to stimulate biomarker research in the universities and related business community and will probably give a modest boost to early clinical testing and commercialization of discoveries within the academic setting. Whether there will be a consequent improvement in the quality and efficiency of the overall process remains to be seen.

Development of manufacturing processes: improved technology for ceramic engine components. Monthly report, August 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.; Taylor, A.J.; Weber, G.W.

Progress is described in a research program to develop advanced tooling concepts, processing techniques, and related technology for the economical high-volume manufacture of ceramic engine components. Because of the success of the initial fabrication effort for hot pressing fully dense ceramic turbine blades to shape and/or contour, the effort has been extended to include the fabrication of more complex shapes and the evaluation of alternative pressure-assisted, high-temperature, consolidation methods.

Active-passive bistatic surveillance for long range air defense

NASA Astrophysics Data System (ADS)

Wardrop, B.; Molyneux-Berry, M. R. B.

1992-06-01

A hypothetical mobile support receiver capable of working within existing and future air defense networks as a means to maintain essential surveillance functions is considered. It is shown how multibeam receiver architecture supported by digital signal processing can substantially improve surveillance performance against chaff and jamming threats. A dual-mode support receiver concept is proposed which is based on the state-of-the-art phased-array technology, modular processing in industry standard hardware and existing networks.

Parallel-Processing Test Bed For Simulation Software

NASA Technical Reports Server (NTRS)

Blech, Richard; Cole, Gary; Townsend, Scott

1996-01-01

Second-generation Hypercluster computing system is multiprocessor test bed for research on parallel algorithms for simulation in fluid dynamics, electromagnetics, chemistry, and other fields with large computational requirements but relatively low input/output requirements. Built from standard, off-shelf hardware readily upgraded as improved technology becomes available. System used for experiments with such parallel-processing concepts as message-passing algorithms, debugging software tools, and computational steering. First-generation Hypercluster system described in "Hypercluster Parallel Processor" (LEW-15283).

Prototype and Metrics for Data Processing Chain Components of IPM

NASA Technical Reports Server (NTRS)

Ly, Vuong T.

2014-01-01

This presentation lays out the evolution of the Intelligent Payload Module (IPM) vision given that the HyspIRI mission has been delayed. It shows that there has been a focus on airborne vehcile and unmanned aerial systems to further develop the IPM functionality. This of course does not preclude use of the IPM for space missions but provides alternate paths to continue the concept of improved onboard processing for low latency users of science data products.

Bioreactor design concepts

NASA Technical Reports Server (NTRS)

Bowie, William

1987-01-01

Two parallel lines of work are underway in the bioreactor laboratory. One of the efforts is devoted to the continued development and utilization of a laboratory research system. That system's design is intended to be fluid and dynamic. The sole purpose of such a device is to allow testing and development of equipment concepts and procedures. Some of the results of those processes are discussed. A second effort is designed to produce a flight-like bioreactor contained in a double middeck locker. The result of that effort has been to freeze a particular bioreactor design in order to allow fabrication of the custom parts. The system is expected to be ready for flight in early 1988. However, continued use of the laboratory system will lead to improvements in the space bioreactor. Those improvements can only be integrated after the initial flight series.

Adding Qualitative and Mixed Methods Research to Health Intervention Studies: Interacting With Differences.

PubMed

Johnson, R Burke; Schoonenboom, Judith

2016-04-01

The purpose of this article is to explain how to improve intervention designs, such as randomized controlled trials (RCTs), in health science research using a process philosophy and theory known as dialectical pluralism (DP). DP views reality as plural and uses dialectical, dialogical, and hermeneutical approaches to knowledge construction. Using DP and its "both/and" logic, and its attempt to produce new creative syntheses, researchers on heterogeneous teams can better dialogue with qualitative and mixed methods approaches, concepts, paradigms, methodologies, and methods to improve their intervention research studies. The concept of reflexivity is utilized but is expanded when it is a component of DP. Examples of strategies for identifying, inviting, and creating divergence and integrative strategies for producing strong mixed methods intervention studies are provided and illustrated using real-life examples. © The Author(s) 2015.

Definition and preliminary design of the Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 2

NASA Technical Reports Server (NTRS)

1990-01-01

The steps and engineering trades and analyses used in establishing the initial requirements and in developing a concept and configuration for the laser atmospheric wind sounder (LAWS) instrument. A summary of the performance anticipated from the baseline configuration, and a bibliography are presented. LAWS, which is a facility instrument of the Earth observing system (EOS), is the culmination of over 20 years of effort in the field of laser Doppler wind sensing and will be the first instrument to fly in space capable of providing global-scale tropospheric wind profiles at high spatial resolutions. Global-scale wind profiles are necessary for: (1) more accurate diagnosis of large-scale circulation and climate dynamics; (2) improved numerical weather prediction; (3) improved understanding of mesoscale systems; and (4) improved understanding of global biogeochemical and hydrologic cycles. The objective of phase 1 was to define and perform a preliminary design for the LAWS instrument. The definition phase consisted of identifying realistic concepts for LAWS and analyzing them in sufficient detail to be able to choose the most promising one for the LAWS instrument. Systems and subsystems configurations were then developed for the chosen concept. The concept and subsequent configuration were to be compatible with two prospective platforms: the Japanese polar orbiting platform (JPOP) and as an attached payload on the Space Station Freedom. After a thorough and objective concept selection process, a heterodyne detection Doppler lidar using a CO2 laser transmitter operating a 9.1 micron over a 2.1 micron solid state system was chosen. A configuration for LAWS that meets the performance requirements was designed at the conclusion of phase 1.

Improving students’ conceptions on fluid dynamics through peer teaching model with PDEODE (PTM-PDEODE)

NASA Astrophysics Data System (ADS)

Samsudin, A.; Fratiwi, N.; Amin, N.; Wiendartun; Supriyatman; Wibowo, F.; Faizin, M.; Costu, B.

2018-05-01

This study based on an importance of improving students’ conceptions and reduces students’ misconceptions on fluid dynamics concepts. Consequently, should be done the study through combining Peer Teaching Model (PTM) and PDEODE (Prediction, Discuss, Explain, Observe, Discuss and Explain) learning strategy (PTM-PDEODE). For the research methods, we used the 4D model (Defining, Designing, Developing, and Disseminating). The samples are 38 students (their ages were an average of 17 years-old) at one of the senior high schools in Bandung. The improvement of students’ conceptions was diagnosed through a four-tier test of fluid dynamics. At the disseminating phase, students’ conceptions of fluid dynamics concepts are increase after the use of PTM-PDEODE. In conclusion, the development of PTM-PDEODE is respectable enough to improve students’ conceptions on dinamics fluid.

Laboratory safety and the WHO World Alliance for Patient Safety.

PubMed

McCay, Layla; Lemer, Claire; Wu, Albert W

2009-06-01

Laboratory medicine has been a pioneer in the field of patient safety; indeed, the College of American Pathology first called attention to the issue in 1946. Delivering reliable laboratory results has long been considered a priority, as the data produced in laboratory medicine have the potential to critically influence individual patients' diagnosis and management. Until recently, most attention on laboratory safety has focused on the analytic stage of laboratory medicine. Addressing this stage has led to significant and impressive improvements in the areas over which laboratories have direct control. However, recent data demonstrate that pre- and post-analytical phases are at least as vulnerable to errors; to further improve patient safety in laboratory medicine, attention must now be focused on the pre- and post-analytic phases, and the concept of patient safety as a multi-disciplinary, multi-stage and multi-system concept better understood. The World Alliance for Patient Safety (WAPS) supports improvement of patient safety globally and provides a potential framework for considering the total testing process.

Traffic Aware Planner for Cockpit-Based Trajectory Optimization

NASA Technical Reports Server (NTRS)

Woods, Sharon E.; Vivona, Robert A.; Henderson, Jeffrey; Wing, David J.; Burke, Kelly A.

2016-01-01

The Traffic Aware Planner (TAP) software application is a cockpit-based advisory tool designed to be hosted on an Electronic Flight Bag and to enable and test the NASA concept of Traffic Aware Strategic Aircrew Requests (TASAR). The TASAR concept provides pilots with optimized route changes (including altitude) that reduce fuel burn and/or flight time, avoid interactions with known traffic, weather and restricted airspace, and may be used by the pilots to request a route and/or altitude change from Air Traffic Control. Developed using an iterative process, TAP's latest improvements include human-machine interface design upgrades and added functionality based on the results of human-in-the-loop simulation experiments and flight trials. Architectural improvements have been implemented to prepare the system for operational-use trials with partner commercial airlines. Future iterations will enhance coordination with airline dispatch and add functionality to improve the acceptability of TAP-generated route-change requests to pilots, dispatchers, and air traffic controllers.

Intelligent Extruder

DOE Office of Scientific and Technical Information (OSTI.GOV)

AlperEker; Mark Giammattia; Paul Houpt

''Intelligent Extruder'' described in this report is a software system and associated support services for monitoring and control of compounding extruders to improve material quality, reduce waste and energy use, with minimal addition of new sensors or changes to the factory floor system components. Emphasis is on process improvements to the mixing, melting and de-volatilization of base resins, fillers, pigments, fire retardants and other additives in the :finishing'' stage of high value added engineering polymer materials. While GE Plastics materials were used for experimental studies throughout the program, the concepts and principles are broadly applicable to other manufacturers materials. Themore » project involved a joint collaboration among GE Global Research, GE Industrial Systems and Coperion Werner & Pleiderer, USA, a major manufacturer of compounding equipment. Scope of the program included development of a algorithms for monitoring process material viscosity without rheological sensors or generating waste streams, a novel detection scheme for rapid detection of process upsets and an adaptive feedback control system to compensate for process upsets where at line adjustments are feasible. Software algorithms were implemented and tested on a laboratory scale extruder (50 lb/hr) at GE Global Research and data from a production scale system (2000 lb/hr) at GE Plastics was used to validate the monitoring and detection software. Although not evaluated experimentally, a new concept for extruder process monitoring through estimation of high frequency drive torque without strain gauges is developed and demonstrated in simulation. A plan to commercialize the software system is outlined, but commercialization has not been completed.« less

A similarity-based data warehousing environment for medical images.

PubMed

Teixeira, Jefferson William; Annibal, Luana Peixoto; Felipe, Joaquim Cezar; Ciferri, Ricardo Rodrigues; Ciferri, Cristina Dutra de Aguiar

2015-11-01

A core issue of the decision-making process in the medical field is to support the execution of analytical (OLAP) similarity queries over images in data warehousing environments. In this paper, we focus on this issue. We propose imageDWE, a non-conventional data warehousing environment that enables the storage of intrinsic features taken from medical images in a data warehouse and supports OLAP similarity queries over them. To comply with this goal, we introduce the concept of perceptual layer, which is an abstraction used to represent an image dataset according to a given feature descriptor in order to enable similarity search. Based on this concept, we propose the imageDW, an extended data warehouse with dimension tables specifically designed to support one or more perceptual layers. We also detail how to build an imageDW and how to load image data into it. Furthermore, we show how to process OLAP similarity queries composed of a conventional predicate and a similarity search predicate that encompasses the specification of one or more perceptual layers. Moreover, we introduce an index technique to improve the OLAP query processing over images. We carried out performance tests over a data warehouse environment that consolidated medical images from exams of several modalities. The results demonstrated the feasibility and efficiency of our proposed imageDWE to manage images and to process OLAP similarity queries. The results also demonstrated that the use of the proposed index technique guaranteed a great improvement in query processing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Terroir as a Concept to Improve Human Health

NASA Astrophysics Data System (ADS)

Brevik, Eric C.; Steffan, Joshua J.; Burgess, Lynn C.; Cerdà, Artemi; Pereg, Lily

2017-04-01

Soil is important to human health because of the ability of healthy soils to supply nutrients through food products, medications derived from soil, its ability to clean water, and for many other positive reasons. On the other hand, degraded soils can have negative impacts on human health through processes such as dust generation and by acting as a point of human contact with heavy metals, organic chemicals, and pathogens. Despite the definite links between soil and human health, it is likely that most people don't think about soil when considering human health issues. In fact, there appears to be a disconnect between most people in our modern society and soil, and when people do notice soil it often seems to be in a negative context, leading to terms such as "soiled", "dirty", "dirt poor", etc. People pay attention to and care for things that matter to them, and creating a more positive public image of soil has the possibility of improving human health by leading to careful and caring treatment of the soil resource. The concept of terroir is a good example of a setting within which soils have a more positive image. While terroir originally established a connection between those who love wine and the soils that produce those wines, the concept has been expanded to many additional products such as cacao, cheese, coffee, fruits, olive oil, and vegetables. If the terroir concept could be expanded to include additional products that are important to people and expanded into parts of the world where it is not currently well known, that may provide an increased positive perception of soil, and thereby indirectly improve human health. It may even be possible to provide a terroir link to direct health benefits, such as medications derived from a given soil environment, and therefore provide a very focused emphasis on soil and human health issues. Therefore, we advocate a concerted effort to expand the terroir concept as a means to improve overall human health.

Development of Textile Reinforced Composites for Aircraft Structures

NASA Technical Reports Server (NTRS)

Dexter, H. Benson

1998-01-01

NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

Understanding Negative Self-Evaluations in Borderline Personality Disorder-a Review of Self-Related Cognitions, Emotions, and Motives.

PubMed

Winter, Dorina; Bohus, Martin; Lis, Stefanie

2017-03-01

Self-conscious emotions, such as guilt, shame, or self-disgust, as well as self-related motives, such as self-enhancement or self-verification, influence how people perceive, evaluate, memorize, and respond to self-related information. They not only influence peoples' concepts of themselves but may also affect their behavior in social environments. In the current review, we describe alterations of self-related processing in borderline personality disorder (BPD). We chose BPD as an example of a mental disorder of which impairments in self-functioning and identity constitute a major feature. Since terminology used in clinical research on self-referential processing is diverse and often confusing, we start with reviewing some of the main concepts in this area of research using a conceptual framework provided from social psychology. Most studies on self-referential processing in BPD focused on descriptions of self-esteem and revealed a negative self-concept, particularly expressed by explicitly reported low self-esteem. Moreover, self-esteem is unstable in BPD and likely reactive to self-relevant cues. BPD patients are prone to negative emotions with respect to themselves, such as self-disgust and shame. First data point to altered self-related motives, too. In conclusion, although explicit self-esteem is widely studied as a global and trait-like feature of BPD, there is a strong lack of studies that take the complexity of the construct self-esteem into account. Further studies on alterations in self-related processes are required to deepen our understanding of impairments of the self-concept in BPD and enable the improvement of psychosocial therapeutic approaches.

A Concept Analysis of Systems Thinking.

PubMed

Stalter, Ann M; Phillips, Janet M; Ruggiero, Jeanne S; Scardaville, Debra L; Merriam, Deborah; Dolansky, Mary A; Goldschmidt, Karen A; Wiggs, Carol M; Winegardner, Sherri

2017-10-01

This concept analysis, written by the National Quality and Safety Education for Nurses (QSEN) RN-BSN Task Force, defines systems thinking in relation to healthcare delivery. A review of the literature was conducted using five databases with the keywords "systems thinking" as well as "nursing education," "nursing curriculum," "online," "capstone," "practicum," "RN-BSN/RN to BSN," "healthcare organizations," "hospitals," and "clinical agencies." Only articles that focused on systems thinking in health care were used. The authors identified defining attributes, antecedents, consequences, and empirical referents of systems thinking. Systems thinking was defined as a process applied to individuals, teams, and organizations to impact cause and effect where solutions to complex problems are accomplished through collaborative effort according to personal ability with respect to improving components and the greater whole. Four primary attributes characterized systems thinking: dynamic system, holistic perspective, pattern identification, and transformation. Using the platform provided in this concept analysis, interprofessional practice has the ability to embrace planned efforts to improve critically needed quality and safety initiatives across patients' lifespans and all healthcare settings. © 2016 Wiley Periodicals, Inc.

Computer-Supported Feedback Message Tailoring for Healthcare Providers in Malawi: Proof-of-Concept.

PubMed

Landis-Lewis, Zach; Douglas, Gerald P; Hochheiser, Harry; Kam, Matthew; Gadabu, Oliver; Bwanali, Mwatha; Jacobson, Rebecca S

2015-01-01

Although performance feedback has the potential to help clinicians improve the quality and safety of care, healthcare organizations generally lack knowledge about how this guidance is best provided. In low-resource settings, tools for theory-informed feedback tailoring may enhance limited clinical supervision resources. Our objectives were to establish proof-of-concept for computer-supported feedback message tailoring in Malawi, Africa. We conducted this research in five stages: clinical performance measurement, modeling the influence of feedback on antiretroviral therapy (ART) performance, creating a rule-based message tailoring process, generating tailored messages for recipients, and finally analysis of performance and message tailoring data. We retrospectively generated tailored messages for 7,448 monthly performance reports from 11 ART clinics. We found that tailored feedback could be routinely generated for four guideline-based performance indicators, with 35% of reports having messages prioritized to optimize the effect of feedback. This research establishes proof-of-concept for a novel approach to improving the use of clinical performance feedback in low-resource settings and suggests possible directions for prospective evaluations comparing alternative designs of feedback messages.

Cross-industry benchmarking: is it applicable to the operating room?

PubMed

Marco, A P; Hart, S

2001-01-01

The use of benchmarking has been growing in nonmedical industries. This concept is being increasingly applied to medicine as the industry strives to improve quality and improve financial performance. Benchmarks can be either internal (set by the institution) or external (use other's performance as a goal). In some industries, benchmarking has crossed industry lines to identify breakthroughs in thinking. In this article, we examine whether the airline industry can be used as a source of external process benchmarking for the operating room.

Design of production process main shaft process with lean manufacturing to improve productivity

NASA Astrophysics Data System (ADS)

Siregar, I.; Nasution, A. A.; Andayani, U.; Anizar; Syahputri, K.

2018-02-01

This object research is one of manufacturing companies that produce oil palm machinery parts. In the production process there is delay in the completion of the Main shaft order. Delays in the completion of the order indicate the low productivity of the company in terms of resource utilization. This study aimed to obtain a draft improvement of production processes that can improve productivity by identifying and eliminating activities that do not add value (non-value added activity). One approach that can be used to reduce and eliminate non-value added activity is Lean Manufacturing. This study focuses on the identification of non-value added activity with value stream mapping analysis tools, while the elimination of non-value added activity is done with tools 5 whys and implementation of pull demand system. Based on the research known that non-value added activity on the production process of the main shaft is 9,509.51 minutes of total lead time 10,804.59 minutes. This shows the level of efficiency (Process Cycle Efficiency) in the production process of the main shaft is still very low by 11.89%. Estimation results of improvement showed a decrease in total lead time became 4,355.08 minutes and greater process cycle efficiency that is equal to 29.73%, which indicates that the process was nearing the concept of lean production.

FPGA based hardware optimized implementation of signal processing system for LFM pulsed radar

NASA Astrophysics Data System (ADS)

Azim, Noor ul; Jun, Wang

2016-11-01

Signal processing is one of the main parts of any radar system. Different signal processing algorithms are used to extract information about different parameters like range, speed, direction etc, of a target in the field of radar communication. This paper presents LFM (Linear Frequency Modulation) pulsed radar signal processing algorithms which are used to improve target detection, range resolution and to estimate the speed of a target. Firstly, these algorithms are simulated in MATLAB to verify the concept and theory. After the conceptual verification in MATLAB, the simulation is converted into implementation on hardware using Xilinx FPGA. Chosen FPGA is Xilinx Virtex-6 (XC6LVX75T). For hardware implementation pipeline optimization is adopted and also other factors are considered for resources optimization in the process of implementation. Focusing algorithms in this work for improving target detection, range resolution and speed estimation are hardware optimized fast convolution processing based pulse compression and pulse Doppler processing.

Medicalization: Current Concept and Future Directions in a Bionic Society

PubMed Central

Maturo, Antonio

2012-01-01

The article illustrates the main features of the concept of medicalization, starting from its theoretical roots. Although it is the process of extending the medical gaze on human conditions, it appears that medicalization cannot be strictly connected to medical imperialism anymore. Other “engines” of medicalization are influential: consumers, biotechnology and managed care. The growth of research and theoretical reflections on medicalization has led to the proposal of other parallel concepts like pharmaceuticalization, genetization and biomedicalization. These new theoretical tools could be useful in the analysis of human enhancement. Human enhancement can be considered as the use of biomedical technology to improve performance on a human being who is not in need of a cure: a practice that is increasingly spreading in what might be defined as a “bionic society”. PMID:22654387

A concept analysis of professional commitment in nursing.

PubMed

García-Moyano, Loreto; Altisent, Rogelio; Pellicer-García, Begoña; Guerrero-Portillo, Sandra; Arrazola-Alberdi, Oihana; Delgado-Marroquín, María Teresa

2017-01-01

The concept of professional commitment is being widely studied at present. However, although it is considered an indicator for the most human part of nursing care, there is no clear definition for it, and different descriptors are being used indiscriminately to reference it. The aim of this study is to clarify the concept of professional commitment in nursing through the Rodgers' evolutionary concept analysis process. Systematic search using English and Spanish descriptors and concept analysis. Studies published between 2009 and June 2015, front-to-back analysis of the Nursing Ethics journal and manual check of articles cited in studies related to the Nijmegen Professionalism Scale. The procedure of concept analysis developed by Rodgers was used. Ethical considerations: Although the topic was not labeled as sensitive and subject to ethical approval, its realization was approved by the Ethical Committee of Clinical Research of Aragon (CEICA) approved the study on 18 March 2015 and also careful procedures have been followed according to ethics expressed in the Declaration of Helsinki. A total of 17 published studies. A clear definition of the concept was made, and surrogate terms, concept dimension, differential factors related to the concept, sociocultural variations and consequences for nursing practice were identified. There is a need for continuous advancement in the development of the concept, specific actions to encourage this and the improvement of evaluation methods for its study.

Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction

NASA Astrophysics Data System (ADS)

Hofmeister, M.; Franke, M. M.; Koerner, C.; Singer, R. F.

2017-12-01

Superalloy gas turbine blades are being produced by investment casting and directional solidification. A new process, Fluidized Carbon Bed Cooling (FCBC), has been developed and is now being optimized in a prototype casting unit with 10 kg pouring weight. In early test runs with still rather simple mold cluster geometries, a reduction of the primary dendrite arm spacing of around 40 pct compared to the standard radiation cooling process (HRS) could be demonstrated. The improvement is mainly attributed to higher temperature gradients driving solidification, made possible by a functioning Dynamic Baffle. Compared to earlier development efforts in the literature, contamination of the melt and damage to the equipment are avoided using carbon-based fluidized bed materials and the so-called "counter pressure concept."

Making finance work for you.

PubMed

Marchwinski, Jay

2002-01-01

Every organization has a process for reviewing requests against their own guidelines, which are not always well defined. Normally, all requests must be able to demonstrate an adequate financial return on any investment of dollars and/or resources. Quality and service improvement benefits sometimes are accepted, but often must be translated into documentable dollars and cents. In this article, the author shows how understanding the basic concepts of revenue and expense is a good first step toward improving your chances of gaining approval. Forming an effective two-way partnership with the staff in your finance department will improve your chances even more.

Improving the Reverse Logistics Respecting Principles of Sustainable Development in an Industrial Company

NASA Astrophysics Data System (ADS)

Fidlerová, Helena; Mĺkva, Miroslava

2016-06-01

Reverse logistics, the movement of materials back up the supply chain, is recognised by many organisations as an opportunity for adding value. The paper considers the theoretical framework and the conception of reverse logistics in literature and practice. The objective of the article is to propose tangible solutions which eliminate the imbalances in reverse logistics and improve the waste management in the company. The case study focuses on the improvement in the process of waste packaging in the context of sustainable development as a part of reverse logistics in the surveyed industrial company in Slovakia.

Student concepts of Natural Selection from a resource-based perspective

NASA Astrophysics Data System (ADS)

Benjamin, Scott Shawn

The past two decades have produced a substantial amount of research about the teaching and learning of evolution; however, recent research often lacks a theoretical foundation. Application of a new theoretical framework could help fill the void and improve research about student concepts of evolution. This study seeks to show that a resource-based framework (Hammer et al., 2005) can improve research into student concepts of natural selection. Concepts of natural selection from urban community college students were assessed via qualitative (interviews, written open-response questions, and write/think aloud procedures) and quantitative methods (coded open response analysis, Concept Inventory for Natural Selection (CINS)(Anderson, Fisher, & Norman, 2002). Results showed that students demonstrate four important aspects of resource-based framework: the multi-faceted construction of concepts, context sensitivity/ concept flexibility, at-the-moment activation of resources, and perceptual frames. In open response assessment, evolutionary-gain responses produced significantly different responses than evolutionary-loss questions with: 1) significantly more correct answers for the gain than loss question (Wilcoxon signed rank test, z = -3.68, p=0.0002); 2) more Lamarckian responses to loss than the gain question (Fisher exact, p=0.0039); and significantly different distributions in expanded need vs basic need answers (Fishers exact, p = 0.02). Results from CINS scores showed significant differences in post activity scores between students that held different naive concepts associated with origin of variation, origin of species, differential reproduction, and limited survival suggesting that some naive ideas facilitate learning. Outcomes also suggest that an everyday or self-experience typological perceptual frame is an underlying source of many incorrect ideas about evolution. Interview and write/think aloud assessments propose four process resources applied by students as they explain evolutionary change: list what I know, why story, compare past to present, mapping self-experience. The study concludes that a resource-based framework is a valuable tool to advance the study student concepts of natural selection.

Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

NASA Astrophysics Data System (ADS)

McCray, Wilmon Wil L., Jr.

The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization model and dashboard that demonstrates the use of statistical methods, statistical process control, sensitivity analysis, quantitative and optimization techniques to establish a baseline and predict future customer satisfaction index scores (outcomes). The American Customer Satisfaction Index (ACSI) model and industry benchmarks were used as a framework for the simulation model.

The Future Spaceborne Hyperspectral Imager Enmap: its In-Flight Radiometric and Geometric Calibration Concept

NASA Astrophysics Data System (ADS)

Schneider, M.; Müller, R.; Krawzcyk, H.; Bachmann, M.; Storch, T.; Mogulsky, V.; Hofer, S.

2012-07-01

The German Aerospace Center DLR - namely the Earth Observation Center EOC and the German Space Operations Center GSOC - is responsible for the establishment of the ground segment of the future German hyperspectral satellite mission EnMAP (Environmental Mapping and Analysis Program). The Earth Observation Center has long lasting experiences with air- and spaceborne acquisition, processing, and analysis of hyperspectral image data. In the first part of this paper, an overview of the radiometric in-flight calibration concept including dark value measurements, deep space measurements, internal lamps measurements and sun measurements is presented. Complemented by pre-launch calibration and characterization these analyses will deliver a detailed and quantitative assessment of possible changes of spectral and radiometric characteristics of the hyperspectral instrument, e.g. due to degradation of single elements. A geometric accuracy of 100 m, which will be improved to 30 m with respect to a used reference image, if it exists, will be achieved by ground processing. Therfore, and for the required co-registration accuracy between SWIR and VNIR channels, additional to the radiometric calibration, also a geometric calibration is necessary. In the second part of this paper, the concept of the geometric calibration is presented in detail. The geometric processing of EnMAP scenes will be based on laboratory calibration results. During repeated passes over selected calibration areas images will be acquired. The update of geometric camera model parameters will be done by an adjustment using ground control points, which will be extracted by automatic image matching. In the adjustment, the improvements of the attitude angles (boresight angles), the improvements of the interior orientation (view vector) and the improvements of the position data are estimated. In this paper, the improvement of the boresight angles is presented in detail as an example. The other values and combinations follow the same rules. The geometric calibration will mainly be executed during the commissioning phase, later in the mission it is only executed if required, i.e. if the geometric accuracy of the produced images is close to or exceeds the requirements of 100 m or 30 m respectively, whereas the radiometric calibration will be executed periodically during the mission with a higher frequency during commissioning phase.

Clinical audit in dentistry: From a concept to an initiation

PubMed Central

Malleshi, Suchetha N; Joshi, Mahasweta; Nair, Soumya K; Ashraf, Irshad

2012-01-01

Clinical audit is a quality improvement process that aims to improve patient care through a systematic review of care against explicit criteria. It is a cyclic and multidisciplinary process which involves a series of steps from planning the audit through measuring the performance to implementing and sustaining the change. Although audit contains some facets of research, it is essential to understand the difference between the two. Auditing can be done right from the record maintaining, diagnosis and treatment and postoperative evaluation and follow-up. The immense potential of clinical audit can be utilized only when open-mindedness and innovativeness are encouraged and evidence-based work culture is cultivated. PMID:23559939

Designing Innovative Learning Environments to Foster Communities of Learners for Students in Initial Vocational Education

ERIC Educational Resources Information Center

Boersma, Annoesjka; ten Dam, Geert; Wardekker, Willem; Volman, Monique

2016-01-01

In this study, the concept of "community of learners" was used to improve initial vocational education. The framework of a 'community of learners for vocational orientation' that we present offers both a theoretical understanding of teaching-learning processes in initial vocational education and heuristics for the design of innovative…

Total Quality Management (TQM) as the Procedure for Management of Integrated Academics.

ERIC Educational Resources Information Center

Anderson, Lowell D.

Total Quality Management (TQM) is a way of doing business that involves every employee, both labor and management, in an effort to improve quality and productivity. The quality management concept consists of common principles: (1) customer focus; (2) process focus; (3) failure prevention; (4) mobilization of work force; (5) decision making based…

Learning Experiences Reuse Based on an Ontology Modeling to Improve Adaptation in E-Learning Systems

ERIC Educational Resources Information Center

Hadj M'tir, Riadh; Rumpler, Béatrice; Jeribi, Lobna; Ben Ghezala, Henda

2014-01-01

Current trends in e-Learning focus mainly on personalizing and adapting the learning environment and learning process. Although their increasingly number, theses researches often ignore the concepts of capitalization and reuse of learner experiences which can be exploited later by other learners. Thus, the major challenge of distance learning is…

Korthagen's ALACT Model: Application and Modification in the Science Project "Kolumbus-Kids"

ERIC Educational Resources Information Center

Wegner, Claas; Weber, Phillip; Ohlberger, Stephanie

2014-01-01

In order to improve one's teaching in the long run, reflection on the lessons makes up an integral part in the process of developing a sufficient reflection competence. The problem, however, is how this reflection competence can be established in student teachers already and if that concept is compatible with current systems of teacher education…

Proceedings of the Conference on Psychology and the Process of Schooling in the Next Decade: Alternative Conceptions.

ERIC Educational Resources Information Center

Reynolds, Maynard C., Ed.

The conference intended to stimulate dialogue between psychologists and educators for the purpose of developing "creative propositions" that address the functions of schooling with the most relevant and advanced psychological knowledge. Most broadly, the papers and critiques are concerned with how psychology could be used to improve: (1)…

Expanding horizons of forest ecosystem management: proceedings of the third habitat futures workshop; 1992 October; Vernon, B.C.

Treesearch

Mark H. Huff; Lisa K. Norris; J. Brian Nyberg; Nancy L. Wilkin; coords.

1994-01-01

New approaches and technologies to evaluate wildlife-habitat relations, implement integrated forest management, and improve public participation in the process are needed to implement ecosystem management. Presented here are five papers that examine ecosystem management concepts at international, national, regional, and local scales. Two general management problems...

Improving Junior High School Students' Spatial Reasoning Ability through Model Eliciting Activities with Cabri 3D

ERIC Educational Resources Information Center

Hartatiana; Darhim; Nurlaelah, Elah

2018-01-01

One of students' abilities which can facilitate them to understand geometric concepts is spatial reasoning ability. Spatial reasoning ability can be defined as an ability involving someone's cognitive processing to present and manipulate spatial figures, relationship, and figure formations. This research aims to find out significant difference on…

Change Facilitators: In Search of Understanding Their Role. Research on the Improvement Process in Schools and Colleges.

ERIC Educational Resources Information Center

Rutherford, William L.; And Others

This information analysis paper examines (1) the characteristics associated with effective change facilitators and (2) the concept of "style" and its value in describing and understanding leadership performance and the role of change facilitators in particular. Three bodies of literature are highlighted and summarized in pursuit of…

An Examination of the Total Quality Management (TQM) Concept Given Current Federal/DoD Competition Initiatives

DTIC Science & Technology

1992-06-01

processes. It demands commitment and discipline. It relies on people and involves everyone. (DoD TQM Pamplet (undated), 1) The following are four...export the TQM philosophy to their suppliers, as indicated in their brochure : TQM relies on continuous improvement in DoD’s acquired products and services

Risk Assessment as an Environmental Management Tool: Considerations for Freshwater Wetlands

Treesearch

A. Dennis Lemly

1997-01-01

This paper presents a foundation for improving the risk assessment process for freshwater wetlands. Integrating wetland science, i.e., use of an ecosystem-based approach, is the key concept. Each biotic and abiotic wetland component should be identified and its contribution to ecosystem functions and societal values determined when deciding whether a stressor poses an...

Software Configuration Management Guidebook

NASA Technical Reports Server (NTRS)

1995-01-01

The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes which are used in software development. The Software Assurance Guidebook, SMAP-GB-A201, issued in September, 1989, provides an overall picture of the concepts and practices of NASA in software assurance. Lower level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the Software Configuration Management Guidebook which describes software configuration management in a way that is compatible with practices in industry and at NASA Centers. Software configuration management is a key software development process, and is essential for doing software assurance.

Students Fail to Transfer Knowledge of Chromosome Structure to Topics Pertaining to Cell Division

PubMed Central

Newman, Dina L.; Catavero, Christina M.; Wright, L. Kate

2012-01-01

Cellular processes that rely on knowledge of molecular behavior are difficult for students to comprehend. For example, thorough understanding of meiosis requires students to integrate several complex concepts related to chromosome structure and function. Using a grounded theory approach, we have unified classroom observations, assessment data, and in-depth interviews under the theory of knowledge transfer to explain student difficulties with concepts related to chromosomal behavior. In this paper, we show that students typically understand basic chromosome structure but do not activate cognitive resources that would allow them to explain macromolecular phenomena (e.g., homologous pairing during meiosis). To improve understanding of topics related to genetic information flow, we suggest that instructors use pedagogies and activities that prime students for making connections between chromosome structure and cellular processes. PMID:23222838

A New Concept of Working Environment Improvement Within Multicultural Teams

NASA Astrophysics Data System (ADS)

Makraiová, Jana; Cagáňová, Dagmar; Čambál, Miloš

2012-12-01

Multicultural team leaders under the conditions of globalisation process must understand that acquiring cultural awareness and diversity management skills is one of the premises for gaining competitive advantage and satisfying the employeeś need for social cohesion. The concept presented in this paper goes beyond standard understanding of what cultural diversity management means, as it is not perceived as a set of activities that a business as a whole should be responsible for, but encourage every leader to take responsibility for its own awareness firstly. After understanding that cross-cultural competence is a lifelong learning process it is possible to start recognising one’s own cultural mindset before attempting to recognise those of people from other cultures. At this point it is a right time to spread the experience amongst other team members or associates.

Kennedy Space Center Orion Processing Team Planning for Ground Operations

NASA Technical Reports Server (NTRS)

Letchworth, Gary; Schlierf, Roland

2011-01-01

Topics in this presentation are: Constellation Ares I/Orion/Ground Ops Elements Orion Ground Operations Flow Orion Operations Planning Process and Toolset Overview, including: 1 Orion Concept of Operations by Phase 2 Ops Analysis Capabilities Overview 3 Operations Planning Evolution 4 Functional Flow Block Diagrams 5 Operations Timeline Development 6 Discrete Event Simulation (DES) Modeling 7 Ground Operations Planning Document Database (GOPDb) Using Operations Planning Tools for Operability Improvements includes: 1 Kaizen/Lean Events 2 Mockups 3 Human Factors Analysis

Benchmarking: measuring the outcomes of evidence-based practice.

PubMed

DeLise, D C; Leasure, A R

2001-01-01

Measurement of the outcomes associated with implementation of evidence-based practice changes is becoming increasingly emphasized by multiple health care disciplines. A final step to the process of implementing and sustaining evidence-supported practice changes is that of outcomes evaluation and monitoring. The comparison of outcomes to internal and external measures is known as benchmarking. This article discusses evidence-based practice, provides an overview of outcomes evaluation, and describes the process of benchmarking to improve practice. A case study is used to illustrate this concept.

Improving processes through evolutionary optimization.

PubMed

Clancy, Thomas R

2011-09-01

As systems evolve over time, their natural tendency is to become increasingly more complex. Studies on complex systems have generated new perspectives on management in social organizations such as hospitals. Much of this research appears as a natural extension of the cross-disciplinary field of systems theory. This is the 18th in a series of articles applying complex systems science to the traditional management concepts of planning, organizing, directing, coordinating, and controlling. In this article, I discuss methods to optimize complex healthcare processes through learning, adaptation, and evolutionary planning.

Biomimetic photo-actuation: sensing, control and actuation in sun-tracking plants.

PubMed

Dicker, M P M; Rossiter, J M; Bond, I P; Weaver, P M

2014-09-01

Although the actuation mechanisms that drive plant movement have been investigated from a biomimetic perspective, few studies have looked at the wider sensing and control systems that regulate this motion. This paper examines photo-actuation-actuation induced by, and controlled with light-through a review of the sun-tracking functions of the Cornish Mallow. The sun-tracking movement of the Cornish Mallow leaf results from an extraordinarily complex-yet extremely elegant-process of signal perception, generation, filtering and control. Inspired by this process, a concept for a simplified biomimetic analogue of this leaf is proposed: a multifunctional structure employing chemical sensing, signal transmission, and control of composite hydrogel actuators. We present this multifunctional structure, and show that the success of the concept will require improved selection of materials and structural design. This device has application in the solar-tracking of photovoltaic panels for increased energy yield. More broadly it is envisaged that the concept of chemical sensing and control can be expanded beyond photo-actuation to many other stimuli, resulting in new classes of robust solid-state devices.

From single-substance evaluation to ecological process concept: the dilemma of processing gold with cyanide.

PubMed

Korte, F; Coulston, F

1995-10-01

In the past decades, limit concentration values for environmentally dangerous synthetic and natural chemical substances have been established in industrialized countries. Depending on the range of application, state of aggregation, propagation velocity, specific action on living organisms, long- or short-time effect, etc., different terms are used to specify these limit concentrations (acceptable daily intakes, TLV, LD50, emission values, water quality standards, etc.). Several parameters (e.g., range of application, ethic and social valuation, environmental factors, scientific knowledge) have led to nationally and internationally varying values depending on the region and time. The accuracy of this system of evaluation cannot necessarily be improved by listing further analytical data, but rather by furnishing sufficiently secured scientific data for a serious discussion, with the public concepts influenced more and more by the mass media. The best-established scientific knowledge has been acquired by the chemical industry. National and international groups demand that ecological-chemical problems in other fields of industry be dealt with as well; this research should, without doubt, be intensified. The example of the mining industry, which must employ chemical methods to isolate small concentrations (ppm), demonstrates the environmental conflict caused by the increasing world population, requiring the adaptation of the process by industry to the modern environmental concept. This is illustrated by the evolution of the gold recovery process.

Contingency Management and Deliberative Decision-Making Processes.

PubMed

Regier, Paul S; Redish, A David

2015-01-01

Contingency management is an effective treatment for drug addiction. The current explanation for its success is rooted in alternative reinforcement theory. We suggest that alternative reinforcement theory is inadequate to explain the success of contingency management and produce a model based on demand curves that show how little the monetary rewards offered in this treatment would affect drug use. Instead, we offer an explanation of its success based on the concept that it accesses deliberative decision-making processes. We suggest that contingency management is effective because it offers a concrete and immediate alternative to using drugs, which engages deliberative processes, improves the ability of those deliberative processes to attend to non-drug options, and offsets more automatic action-selection systems. This theory makes explicit predictions that can be tested, suggests which users will be most helped by contingency management, and suggests improvements in its implementation.

Contingency Management and Deliberative Decision-Making Processes

PubMed Central

Regier, Paul S.; Redish, A. David

2015-01-01

Contingency management is an effective treatment for drug addiction. The current explanation for its success is rooted in alternative reinforcement theory. We suggest that alternative reinforcement theory is inadequate to explain the success of contingency management and produce a model based on demand curves that show how little the monetary rewards offered in this treatment would affect drug use. Instead, we offer an explanation of its success based on the concept that it accesses deliberative decision-making processes. We suggest that contingency management is effective because it offers a concrete and immediate alternative to using drugs, which engages deliberative processes, improves the ability of those deliberative processes to attend to non-drug options, and offsets more automatic action-selection systems. This theory makes explicit predictions that can be tested, suggests which users will be most helped by contingency management, and suggests improvements in its implementation. PMID:26082725

Patterns of thinking about phylogenetic trees: A study of student learning and the potential of tree thinking to improve comprehension of biological concepts

NASA Astrophysics Data System (ADS)

Naegle, Erin

Evolution education is a critical yet challenging component of teaching and learning biology. There is frequently an emphasis on natural selection when teaching about evolution and conducting educational research. A full understanding of evolution, however, integrates evolutionary processes, such as natural selection, with the resulting evolutionary patterns, such as species divergence. Phylogenetic trees are models of evolutionary patterns. The perspective gained from understanding biology through phylogenetic analyses is referred to as tree thinking. Due to the increasing prevalence of tree thinking in biology, understanding how to read phylogenetic trees is an important skill for students to learn. Interpreting graphics is not an intuitive process, as graphical representations are semiotic objects. This is certainly true concerning phylogenetic tree interpretation. Previous research and anecdotal evidence report that students struggle to correctly interpret trees. The objective of this research was to describe and investigate the rationale underpinning the prior knowledge of introductory biology students' tree thinking Understanding prior knowledge is valuable as prior knowledge influences future learning. In Chapter 1, qualitative methods such as semi-structured interviews were used to explore patterns of student rationale in regard to tree thinking. Seven common tree thinking misconceptions are described: (1) Equating the degree of trait similarity with the extent of relatedness, (2) Environmental change is a necessary prerequisite to evolution, (3) Essentialism of species, (4) Evolution is inherently progressive, (5) Evolution is a linear process, (6) Not all species are related, and (7) Trees portray evolution through the hybridization of species. These misconceptions are based in students' incomplete or incorrect understanding of evolution. These misconceptions are often reinforced by the misapplication of cultural conventions to make sense of trees. Chapter 2 explores the construction, validity, and reliability of a tree thinking concept inventory. Concept inventories are research based instruments that diagnose faulty reasoning among students. Such inventories are tools for improving teaching and learning of concepts. Test scores indicate that tree thinking misconceptions are held by novice and intermediate biology students. Finally, Chapter 3 presents a tree thinking rubric. The rubric aids teachers in selecting and improving introductory tree thinking learning exercises that address students' tree thinking misconceptions.

Automated semantic indexing of figure captions to improve radiology image retrieval.

PubMed

Kahn, Charles E; Rubin, Daniel L

2009-01-01

We explored automated concept-based indexing of unstructured figure captions to improve retrieval of images from radiology journals. The MetaMap Transfer program (MMTx) was used to map the text of 84,846 figure captions from 9,004 peer-reviewed, English-language articles to concepts in three controlled vocabularies from the UMLS Metathesaurus, version 2006AA. Sampling procedures were used to estimate the standard information-retrieval metrics of precision and recall, and to evaluate the degree to which concept-based retrieval improved image retrieval. Precision was estimated based on a sample of 250 concepts. Recall was estimated based on a sample of 40 concepts. The authors measured the impact of concept-based retrieval to improve upon keyword-based retrieval in a random sample of 10,000 search queries issued by users of a radiology image search engine. Estimated precision was 0.897 (95% confidence interval, 0.857-0.937). Estimated recall was 0.930 (95% confidence interval, 0.838-1.000). In 5,535 of 10,000 search queries (55%), concept-based retrieval found results not identified by simple keyword matching; in 2,086 searches (21%), more than 75% of the results were found by concept-based search alone. Concept-based indexing of radiology journal figure captions achieved very high precision and recall, and significantly improved image retrieval.

Using Complexity and Network Concepts to Inform Healthcare Knowledge Translation

PubMed Central

Kitson, Alison; Brook, Alan; Harvey, Gill; Jordan, Zoe; Marshall, Rhianon; O’Shea, Rebekah; Wilson, David

2018-01-01

Many representations of the movement of healthcare knowledge through society exist, and multiple models for the translation of evidence into policy and practice have been articulated. Most are linear or cyclical and very few come close to reflecting the dense and intricate relationships, systems and politics of organizations and the processes required to enact sustainable improvements. We illustrate how using complexity and network concepts can better inform knowledge translation (KT) and argue that changing the way we think and talk about KT could enhance the creation and movement of knowledge throughout those systems needing to develop and utilise it. From our theoretical refinement, we propose that KT is a complex network composed of five interdependent sub-networks, or clusters, of key processes (problem identification [PI], knowledge creation [KC], knowledge synthesis [KS], implementation [I], and evaluation [E]) that interact dynamically in different ways at different times across one or more sectors (community; health; government; education; research for example). We call this the KT Complexity Network, defined as a network that optimises the effective, appropriate and timely creation and movement of knowledge to those who need it in order to improve what they do. Activation within and throughout any one of these processes and systems depends upon the agents promoting the change, successfully working across and between multiple systems and clusters. The case is presented for moving to a way of thinking about KT using complexity and network concepts. This extends the thinking that is developing around integrated KT approaches. There are a number of policy and practice implications that need to be considered in light of this shift in thinking. PMID:29524952

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

NASA Technical Reports Server (NTRS)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the user-centered process provided valuable lessons for improving future collaborative conceptual design efforts.

A novel methodology for estimating upper limits of major cost drivers for profitable conceptual launch system architectures

NASA Astrophysics Data System (ADS)

Rhodes, Russel E.; Byrd, Raymond J.

1998-01-01

This paper presents a ``back of the envelope'' technique for fast, timely, on-the-spot, assessment of affordability (profitability) of commercial space transportation architectural concepts. The tool presented here is not intended to replace conventional, detailed costing methodology. The process described enables ``quick look'' estimations and assumptions to effectively determine whether an initial concept (with its attendant cost estimating line items) provides focus for major leapfrog improvement. The Cost Charts Users Guide provides a generic sample tutorial, building an approximate understanding of the basic launch system cost factors and their representative magnitudes. This process will enable the user to develop a net ``cost (and price) per payload-mass unit to orbit'' incorporating a variety of significant cost drivers, supplemental to basic vehicle cost estimates. If acquisition cost and recurring cost factors (as a function of cost per payload-mass unit to orbit) do not meet the predetermined system-profitability goal, the concept in question will be clearly seen as non-competitive. Multiple analytical approaches, and applications of a variety of interrelated assumptions, can be examined in a quick, (on-the-spot) cost approximation analysis as this tool has inherent flexibility. The technique will allow determination of concept conformance to system objectives.

Repurposing the clinical record: can an existing natural language processing system de-identify clinical notes?

PubMed

Morrison, Frances P; Li, Li; Lai, Albert M; Hripcsak, George

2009-01-01

Electronic clinical documentation can be useful for activities such as public health surveillance, quality improvement, and research, but existing methods of de-identification may not provide sufficient protection of patient data. The general-purpose natural language processor MedLEE retains medical concepts while excluding the remaining text so, in addition to processing text into structured data, it may be able provide a secondary benefit of de-identification. Without modifying the system, the authors tested the ability of MedLEE to remove protected health information (PHI) by comparing 100 outpatient clinical notes with the corresponding XML-tagged output. Of 809 instances of PHI, 26 (3.2%) were detected in output as a result of processing and identification errors. However, PHI in the output was highly transformed, much appearing as normalized terms for medical concepts, potentially making re-identification more difficult. The MedLEE processor may be a good enhancement to other de-identification systems, both removing PHI and providing coded data from clinical text.

Creating Dynamic Learning Environment to Enhance Students’ Engagement in Learning Geometry

NASA Astrophysics Data System (ADS)

Sariyasa

2017-04-01

Learning geometry gives many benefits to students. It strengthens the development of deductive thinking and reasoning; it also provides an opportunity to improve visualisation and spatial ability. Some studies, however, have pointed out the difficulties that students encountered when learning geometry. A preliminary study by the author in Bali revealed that one of the main problems was teachers’ difficulties in delivering geometry instruction. It was partly due to the lack of appropriate instructional media. Coupling with dynamic geometry software, dynamic learning environments is a promising solution to this problem. Employing GeoGebra software supported by the well-designed instructional process may result in more meaningful learning, and consequently, students are motivated to engage in the learning process more deeply and actively. In this paper, we provide some examples of GeoGebra-aided learning activities that allow students to interactively explore and investigate geometry concepts and the properties of geometry objects. Thus, it is expected that such learning environment will enhance students’ internalisation process of geometry concepts.

Perspectives for the information approach application to natural and artificial ecosystems investigation

NASA Astrophysics Data System (ADS)

Lankin, Yuliy

As a methodological matter, all modern conceptions of life development can be subdivided into the substrate (S), the energetic (E) and the informational (I). The S-conception is based on biochemical, genetic and morphological ideas. The E-conception deals with an idea of development of complicated open systems (COS) which are characterized by energy getting constantly from the outside, by improvement of substance cycles and as speeding-up and increasing of "power" of them as well, and by increasing of energy intensity transformation by the each structure of COS. The I-conception has been developing so far in the main within the frameworks of the traditional both cybernetic ideas and information theory that are convenient for many technical applications but are deficient for investigation of ecoand bio-systems. Situation was changed when the conception of adaptive systems (CAS) based on the ideas of ecology, biology and neurocybernetic (neuroinforamtic) had offered. As a consequence of this, the I-conception based on the CAS well accords with the S- and the E-conceptions and allows to hope to their combine into one the S + E + I conception that will include all virtues of the S-, the E-, and the I-conceptions and eliminate of their limitations. Thanks to relative easiness of hierarchic adaptive nonlinear models making using of the CAS, it is possible overcome effectively both of the problems as the "dimensionality problem" and the "loss of stability" as well for complicated models of ecosystems (CME). Optimization of energy and substance consumption process and adaptation of the CME to changes of current conditions are well realized in ranges given by goal function. A use adaptive networks (including neural nets) in frames of the CAS allows to realize any continuous function in control loops and at information processing. The considered features of the S + E + I proposed approach based on the CAS make it perspective for construction as biosphere models and artificial ecosystems as well for space and earth applications.

Visualizing complex processes using a cognitive-mapping tool to support the learning of clinical reasoning.

PubMed

Wu, Bian; Wang, Minhong; Grotzer, Tina A; Liu, Jun; Johnson, Janice M

2016-08-22

Practical experience with clinical cases has played an important role in supporting the learning of clinical reasoning. However, learning through practical experience involves complex processes difficult to be captured by students. This study aimed to examine the effects of a computer-based cognitive-mapping approach that helps students to externalize the reasoning process and the knowledge underlying the reasoning process when they work with clinical cases. A comparison between the cognitive-mapping approach and the verbal-text approach was made by analyzing their effects on learning outcomes. Fifty-two third-year or higher students from two medical schools participated in the study. Students in the experimental group used the computer-base cognitive-mapping approach, while the control group used the verbal-text approach, to make sense of their thinking and actions when they worked with four simulated cases over 4 weeks. For each case, students in both groups reported their reasoning process (involving data capture, hypotheses formulation, and reasoning with justifications) and the underlying knowledge (involving identified concepts and the relationships between the concepts) using the given approach. The learning products (cognitive maps or verbal text) revealed that students in the cognitive-mapping group outperformed those in the verbal-text group in the reasoning process, but not in making sense of the knowledge underlying the reasoning process. No significant differences were found in a knowledge posttest between the two groups. The computer-based cognitive-mapping approach has shown a promising advantage over the verbal-text approach in improving students' reasoning performance. Further studies are needed to examine the effects of the cognitive-mapping approach in improving the construction of subject-matter knowledge on the basis of practical experience.

The FOT tool kit concept

NASA Technical Reports Server (NTRS)

Fatig, Michael

1993-01-01

Flight operations and the preparation for it has become increasingly complex as mission complexities increase. Further, the mission model dictates that a significant increase in flight operations activities is upon us. Finally, there is a need for process improvement and economy in the operations arena. It is therefore time that we recognize flight operations as a complex process requiring a defined, structured, and life cycle approach vitally linked to space segment, ground segment, and science operations processes. With this recognition, an FOT Tool Kit consisting of six major components designed to provide tools to guide flight operations activities throughout the mission life cycle was developed. The major components of the FOT Tool Kit and the concepts behind the flight operations life cycle process as developed at NASA's GSFC for GSFC-based missions are addressed. The Tool Kit is therefore intended to increase productivity, quality, cost, and schedule performance of the flight operations tasks through the use of documented, structured methodologies; knowledge of past lessons learned and upcoming new technology; and through reuse and sharing of key products and special application programs made possible through the development of standardized key products and special program directories.

Age Differences in the Effects of Conceptual Integration Training on Resource Allocation in Sentence Processing

PubMed Central

Stine-Morrow, Elizabeth A. L.; Noh, Soo Rim; Shake, Matthew C.

2009-01-01

This research examined age differences in the accommodation of reading strategies as a consequence of explicit instruction in conceptual integration. In Experiment 1, young, middle-aged, and older adults read sentences for delayed recall using a moving window method. Readers in an experimental group received instruction in making conceptual links during reading while readers in a control group were simply encouraged to allocate effort. Regression analysis to decompose word-by-word reading times in each condition isolated the time allocated to conceptual processing at the point in the text at which new concepts were introduced, as well as at clause and sentence boundaries. While younger adults responded to instructions by differentially allocating effort to sentence wrap-up, older adults allocated effort to intrasentence wrap-up and on new concepts as they were introduced, suggesting that older readers optimized their allocation of effort to linguistic computations for textbase construction within their processing capacity. Experiment 2 verified that conceptual integration training improved immediate recall among older readers as a consequence of engendering allocation to conceptual processing. PMID:19941199

Effect of the self-pumped limiter concept on the tritium fuel cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finn, P.A.; Sze, D.K.; Hassanein, A.

1988-09-01

The self-pumped limiter concept was the impurity control system for the reactor in the Tokamak Power Systems Study (TPSS). The use of a self-pumped limiter had a major impact on the design of the tritium systems of the TPSS fusion reactor. The self-pumped limiter functions by depositing the helium ash under a layer of metal (vanadium). The majority of the hydrogen species are recycled at the plasma edge; a small fraction permeates to the blanket/coolant which was lithium in TPSS. Use of the self-pumped limiter results in the elimination of the plasma processing system. Thus, the blanket tritium processing systemmore » becomes the major tritium system. The main advantages achieved for the tritium systems with a self-pumped limiter are a reduction in the capital cost of tritium processing equipment as well as a reduction in building space, a reduced tritium inventory for processing and for reserve storage, an increase in the inherent safety of the fusion plant and an improvement in economics for a fusion world economy.« less

3D animation model with augmented reality for natural science learning in elementary school

NASA Astrophysics Data System (ADS)

Hendajani, F.; Hakim, A.; Lusita, M. D.; Saputra, G. E.; Ramadhana, A. P.

2018-05-01

Many opinions from primary school students' on Natural Science are a difficult lesson. Many subjects are not easily understood by students, especially on materials that teach some theories about natural processes. Such as rain process, condensation and many other processes. The difficulty that students experience in understanding it is that students cannot imagine the things that have been taught in the material. Although there is material to practice some theories but is actually quite limited. There is also a video or simulation material in the form of 2D animated images. Understanding concepts in natural science lessons are also poorly understood by students. Natural Science learning media uses 3-dimensional animation models (3D) with augmented reality technology, which offers some visualization of science lessons. This application was created to visualize a process in Natural Science subject matter. The hope of making this application is to improve student's concept. This app is made to run on a personal computer that comes with a webcam with augmented reality. The app will display a 3D animation if the camera can recognize the marker.

Enabling Rapid and Robust Structural Analysis During Conceptual Design

NASA Technical Reports Server (NTRS)

Eldred, Lloyd B.; Padula, Sharon L.; Li, Wu

2015-01-01

This paper describes a multi-year effort to add a structural analysis subprocess to a supersonic aircraft conceptual design process. The desired capabilities include parametric geometry, automatic finite element mesh generation, static and aeroelastic analysis, and structural sizing. The paper discusses implementation details of the new subprocess, captures lessons learned, and suggests future improvements. The subprocess quickly compares concepts and robustly handles large changes in wing or fuselage geometry. The subprocess can rank concepts with regard to their structural feasibility and can identify promising regions of the design space. The automated structural analysis subprocess is deemed robust and rapid enough to be included in multidisciplinary conceptual design and optimization studies.

Electroplex as a New Concept of Universal Host for Improved Efficiency and Lifetime in Red, Yellow, Green, and Blue Phosphorescent Organic Light‐Emitting Diodes

PubMed Central

Song, Wook; Cho, Yong Joo; Yu, Hyeonghwa; Aziz, Hany; Lee, Kang Mun

2017-01-01

Abstract A new concept of host, electroplex host, is developed for high efficiency and long lifetime phosphorescent organic light‐emitting diodes by mixing two host materials generating an electroplex under an electric field. A carbazole‐type host and a triazine‐type host are selected as the host materials to form the electroplex host. The electroplex host is found to induce light emission through an energy transfer process rather than charge trapping, and universally improves the lifetime of red, yellow, green, and blue phosphorescent organic light‐emitting diodes by more than four times. Furthermore, the electroplex host shows much longer lifetime than a common exciplex host. This is the first demonstration of using the electroplex as the host of high efficiency and long lifetime phosphorescent organic light‐emitting diodes. PMID:29610726

Ontology-Driven Business Modelling: Improving the Conceptual Representation of the REA Ontology

NASA Astrophysics Data System (ADS)

Gailly, Frederik; Poels, Geert

Business modelling research is increasingly interested in exploring how domain ontologies can be used as reference models for business models. The Resource Event Agent (REA) ontology is a primary candidate for ontology-driven modelling of business processes because the REA point of view on business reality is close to the conceptual modelling perspective on business models. In this paper Ontology Engineering principles are employed to reengineer REA in order to make it more suitable for ontology-driven business modelling. The new conceptual representation of REA that we propose uses a single representation formalism, includes a more complete domain axiomatizat-ion (containing definitions of concepts, concept relations and ontological axioms), and is proposed as a generic model that can be instantiated to create valid business models. The effects of these proposed improvements on REA-driven business modelling are demonstrated using a business modelling example.

Marketing service guarantees for health care.

PubMed

Levy, J S

1999-01-01

The author introduces the concept of service guarantees for application in health care and differentiates between explicit, implicit, and conditional vs. unconditional types of guarantees. An example of an unconditional guarantee of satisfaction is provided by the hospitality industry. Firms conveying an implicit guarantee are those with outstanding reputations for products such as luxury automobiles, or ultimate customer service, like Nordstrom. Federal Express and Domino's Pizza offer explicit guarantees of on-time delivery. Taking this concept into efforts to improve health care delivery involves a number of caveats. Customers invited to use exceptional service cards may use these to record either satisfaction or dissatisfaction. The cards need to provide enough specific information about issues so that "immediate action could be taken to improve processes." Front-line employees should be empowered to respond to complaints in a meaningful way to resolve the problem before the client leaves the premises.

A small-gap electrostatic micro-actuator for large deflections

PubMed Central

Conrad, Holger; Schenk, Harald; Kaiser, Bert; Langa, Sergiu; Gaudet, Matthieu; Schimmanz, Klaus; Stolz, Michael; Lenz, Miriam

2015-01-01

Common quasi-static electrostatic micro actuators have significant limitations in deflection due to electrode separation and unstable drive regions. State-of-the-art electrostatic actuators achieve maximum deflections of approximately one third of the electrode separation. Large electrode separation and high driving voltages are normally required to achieve large actuator movements. Here we report on an electrostatic actuator class, fabricated in a CMOS-compatible process, which allows high deflections with small electrode separation. The concept presented makes the huge electrostatic forces within nanometre small electrode separation accessible for large deflections. Electrostatic actuations that are larger than the electrode separation were measured. An analytical theory is compared with measurement and simulation results and enables closer understanding of these actuators. The scaling behaviour discussed indicates significant future improvement on actuator deflection. The presented driving concept enables the investigation and development of novel micro systems with a high potential for improved device and system performance. PMID:26655557

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2001-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2002-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Improving ethanol productivity through self-cycling fermentation of yeast: a proof of concept.

PubMed

Wang, Jie; Chae, Michael; Sauvageau, Dominic; Bressler, David C

2017-01-01

The cellulosic ethanol industry has developed efficient strategies for converting sugars obtained from various cellulosic feedstocks to bioethanol. However, any further major improvements in ethanol productivity will require development of novel and innovative fermentation strategies that enhance incumbent technologies in a cost-effective manner. The present study investigates the feasibility of applying self-cycling fermentation (SCF) to cellulosic ethanol production to elevate productivity. SCF is a semi-continuous cycling process that employs the following strategy: once the onset of stationary phase is detected, half of the broth volume is automatically harvested and replaced with fresh medium to initiate the next cycle. SCF has been shown to increase product yield and/or productivity in many types of microbial cultivation. To test whether this cycling process could increase productivity during ethanol fermentations, we mimicked the process by manually cycling the fermentation for five cycles in shake flasks, and then compared the results to batch operation. Mimicking SCF for five cycles resulted in regular patterns with regards to glucose consumption, ethanol titer, pH, and biomass production. Compared to batch fermentation, our cycling strategy displayed improved ethanol volumetric productivity (the titer of ethanol produced in a given cycle per corresponding cycle time) and specific productivity (the amount of ethanol produced per cellular biomass) by 43.1 ± 11.6 and 42.7 ± 9.8%, respectively. Five successive cycles contributed to an improvement of overall productivity (the aggregate amount of ethanol produced at the end of a given cycle per total processing time) and the estimated annual ethanol productivity (the amount of ethanol produced per year) by 64.4 ± 3.3 and 33.1 ± 7.2%, respectively. This study provides proof of concept that applying SCF to ethanol production could significantly increase productivities, which will help strengthen the cellulosic ethanol industry.

Effectiveness of a Low-Cost, Graduate Student–Led Intervention on Study Habits and Performance in Introductory Biology

PubMed Central

Hoskins, Tyler D.; Gantz, J. D.; Chaffee, Blake R.; Arlinghaus, Kel; Wiebler, James; Hughes, Michael; Fernandes, Joyce J.

2017-01-01

Institutions have developed diverse approaches that vary in effectiveness and cost to improve student performance in introductory science, technology, engineering, and mathematics courses. We developed a low-cost, graduate student–led, metacognition-based study skills course taught in conjunction with the introductory biology series at Miami University. Our approach aimed to improve performance for underachieving students by combining an existing framework for the process of learning (the study cycle) with concrete tools (outlines and concept maps) that have been shown to encourage deep understanding. To assess the effectiveness of our efforts, we asked 1) how effective our voluntary recruitment model was at enrolling the target cohort, 2) how the course impacted performance on lecture exams, 3) how the course impacted study habits and techniques, and 4) whether there are particular study habits or techniques that are associated with large improvements on exam scores. Voluntary recruitment attracted only 11–17% of our target cohort. While focal students improved on lecture exams relative to their peers who did not enroll, gains were relatively modest, and not all students improved. Further, although students across both semesters of our study reported improved study habits (based on pre and post surveys) and on outlines and concept maps (based on retrospectively scored assignments), gains were more dramatic in the Fall semester. Multivariate models revealed that, while changes in study habits and in the quality of outlines and concept maps were weakly associated with change in performance on lecture exams, relationships were only significant in the Fall semester and were sometimes counterintuitive. Although benefits of the course were offset somewhat by the inefficiency of voluntary recruitment, we demonstrate the effectiveness our course, which is inexpensive to implement and has advantage of providing pedagogical experience to future educators. PMID:28747353

Real-time improvement of continuous glucose monitoring accuracy: the smart sensor concept.

PubMed

Facchinetti, Andrea; Sparacino, Giovanni; Guerra, Stefania; Luijf, Yoeri M; DeVries, J Hans; Mader, Julia K; Ellmerer, Martin; Benesch, Carsten; Heinemann, Lutz; Bruttomesso, Daniela; Avogaro, Angelo; Cobelli, Claudio

2013-04-01

Reliability of continuous glucose monitoring (CGM) sensors is key in several applications. In this work we demonstrate that real-time algorithms can render CGM sensors smarter by reducing their uncertainty and inaccuracy and improving their ability to alert for hypo- and hyperglycemic events. The smart CGM (sCGM) sensor concept consists of a commercial CGM sensor whose output enters three software modules, able to work in real time, for denoising, enhancement, and prediction. These three software modules were recently presented in the CGM literature, and here we apply them to the Dexcom SEVEN Plus continuous glucose monitor. We assessed the performance of the sCGM on data collected in two trials, each containing 12 patients with type 1 diabetes. The denoising module improves the smoothness of the CGM time series by an average of ∼57%, the enhancement module reduces the mean absolute relative difference from 15.1 to 10.3%, increases by 12.6% the pairs of values falling in the A-zone of the Clarke error grid, and finally, the prediction module forecasts hypo- and hyperglycemic events an average of 14 min ahead of time. We have introduced and implemented the sCGM sensor concept. Analysis of data from 24 patients demonstrates that incorporation of suitable real-time signal processing algorithms for denoising, enhancement, and prediction can significantly improve the performance of CGM applications. This can be of great clinical impact for hypo- and hyperglycemic alert generation as well in artificial pancreas devices.

Concept of Operations Visualization in Support of Ares I Production

NASA Technical Reports Server (NTRS)

Chilton, James H.; Smith, Daid Alan

2008-01-01

Boeing was selected in 2007 to manufacture Ares I Upper Stage and Instrument Unit according to NASA's design which would require the use of the latest manufacturing and integration processes to meet NASA budget and schedule targets. Past production experience has established that the majority of the life cycle cost is established during the initial design process. Concept of Operations (CONOPs) visualizations/simulations help to reduce life cycle cost during the early design stage. Production and operation visualizations can reduce tooling, factory capacity, safety, and build process risks while spreading program support across government, academic, media and public constituencies. The NASA/Boeing production visualization (DELMIA; Digital Enterprise Lean Manufacturing Interactive Application) promotes timely, concurrent and collaborative producibility analysis (Boeing)while supporting Upper Stage Design Cycles (NASA). The DELMIA CONOPs visualization reduced overall Upper Stage production flow time at the manufacturing facility by over 100 man-days to 312.5 man-days and helped to identify technical access issues. The NASA/Boeing Interactive Concept of Operations (ICON) provides interactive access to Ares using real mission parameters, allows users to configure the mission which encourages ownership and identifies areas for improvement, allows mission operations or spacecraft detail to be added as needed, and provides an effective, low coast advocacy, outreach and education tool.

Making Learning Last: Teachers' Long-Term Retention of Improved Nature of Science Conceptions and Instructional Rationales

ERIC Educational Resources Information Center

Mulvey, Bridget K.; Bell, Randy L.

2017-01-01

Despite successful attempts to improve learners' nature of science (NOS) conceptions through explicit, reflective approaches, retention of improved conceptions is rarely addressed in research. The issue of context for NOS instruction has implications for this retention. Whether to contextualise has been the question occupying science educators'…

Affinity+: Semi-Structured Brainstorming on Large Displays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burtner, Edwin R.; May, Richard A.; Scarberry, Randall E.

2013-04-27

Affinity diagraming is a powerful method for encouraging and capturing lateral thinking in a group environment. The Affinity+ Concept was designed to improve the collaborative brainstorm process through the use of large display surfaces in conjunction with mobile devices like smart phones and tablets. The system works by capturing the ideas digitally and allowing users to sort and group them on a large touch screen manually. Additionally, Affinity+ incorporates theme detection, topic clustering, and other processing algorithms that help bring structured analytic techniques to the process without requiring explicit leadership roles and other overhead typically involved in these activities.

Neoteric Media as Tools for Process Intensification

NASA Astrophysics Data System (ADS)

Beh, C. C.; Mammucari, R.; Foster, N. R.

2017-06-01

Process intensification (PI) is a commonly used term in the chemical processing industry. When the concept of PI was first introduced in the late 1970s within the Imperial Chemical Industries (ICI) company, the main impetus was to reduce the processing cost without impairing the production rate. Neoteric media present as alternatives in chemical processing include gas-expanded liquids, ionic liquids, subcritical water, and combination of gas-expanded liquids and ionic liquids. The applications of neoteric media include particle engineering for improved bioavailability, controlled release of therapeutic implants, pharmaceutical formulations, extraction of natural products, nano-carriers for drug delivery, sterilisation of implants, and chemical reactions. This paper provides an overview of the use of these neoteric media.

Application of lean six sigma to waste minimization in cigarette paper industry

NASA Astrophysics Data System (ADS)

Syahputri, K.; Sari, R. M.; Anizar; Tarigan, I. R.; Siregar, I.

2018-02-01

The cigarette paper industry is one of the industry that is always experiencing increasing demand from consumers. Consumer expectations for the products produced also increased both in terms of quality and quantity. The company continuously improves the quality of its products by trying to minimize nonconformity, waste and improve the efficiency of the whole production process of the company. In this cigarette industry, there is a disability whose value is above the company’s defect tolerance that is 10% of the production amount per month. Another problem also occurs in the production time is too long due to the many activities that are not value added (non value added activities) on the production floor. To overcome this problem, it is necessary to improve the production process of cigarette paper and minimize production time by reducing non value added activities. Repairs done with Lean Six Sigma. Lean Six Sigma is a combination of Lean and Six Sigma concept with DMAIC method (Define, Measure, Analyze, Improve, Control). With this Lean approach, obtained total production time of 1479.13 minutes proposal with cycle efficiency process increased by 12.64%.

Data linkage capabilities in Australia: practical issues identified by a Population Health Research Network 'Proof of Concept project'.

PubMed

Mitchell, Rebecca J; Cameron, Cate M; McClure, Rod J; Williamson, Ann M

2015-08-01

To describe the practical issues that need to be overcome to conduct national data linkage projects in Australia and propose recommendations to improve efficiency. Review of the processes, documentation and applications required to conduct national data linkage in Australia. The establishment of state and national data linkage centres in Australia has placed Australia at the forefront of research linking health-related administrative data collections. However, improvements are needed to reduce the clerical burden on researchers, simplify the process of obtaining ethics approval, improve data accessibility, and thus improve the efficiency of data linkage research. While a sound state and national data linkage infrastructure is in place, the current complexity, duplication and lack of cohesion undermines any attempts to conduct research involving national record linkage in a timely manner. Data linkage applications and Human Research Ethics Committee approval processes need to be streamlined and duplication removed, in order to reduce the administrative and financial burden on researchers if national data linkage research is to be viable. © 2015 Public Health Association of Australia.

Construction of the mathematical concept of pseudo thinking students

NASA Astrophysics Data System (ADS)

Anggraini, D.; Kusmayadi, T. A.; Pramudya, I.

2018-05-01

Thinking process is a process that begins with the acceptance of information, information processing and information calling in memory with structural changes that include concepts or knowledges. The concept or knowledge is individually constructed by each individual. While, students construct a mathematical concept, students may experience pseudo thinking. Pseudo thinking is a thinking process that results in an answer to a problem or construction to a concept “that is not true”. Pseudo thinking can be classified into two forms there are true pseudo and false pseudo. The construction of mathematical concepts in students of pseudo thinking should be immediately known because the error will have an impact on the next construction of mathematical concepts and to correct the errors it requires knowledge of the source of the error. Therefore, in this article will be discussed thinking process in constructing of mathematical concepts in students who experience pseudo thinking.

Mental models: a basic concept for human factors design in infection prevention.

PubMed

Sax, H; Clack, L

2015-04-01

Much of the effort devoted to promoting better hand hygiene is based on the belief that poor hand hygiene reflects poor motivation. We argue, however, that automatic unconscious behaviour driven by 'mental models' is an important contributor to what actually happens. Mental models are concepts of reality--imaginary, often blurred, and sometimes unstable. Human beings use them to reduce mental load and free up capacity in the conscious mind to focus on deliberate activities. They are pragmatic solutions to the complexity of life. Knowledge of such mental processes helps healthcare designers and clinicians overcome barriers to behavioural change. This article reviews the concept of mental models and considers how it can be used to improve hand hygiene and patient safety. Copyright © 2015 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Productivity improvement with green approach to palm oil factory productivity

NASA Astrophysics Data System (ADS)

Matondang, N.

2018-02-01

The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

The Evaluation of Facilitation Process in Building Community Capacity about OVOP Concept in Kenjeran Coastal Area, Surabaya

NASA Astrophysics Data System (ADS)

Handayeni, K. D. M. E.; Santoso, E. B.; Siswanto, V. K.

2017-07-01

The concept of One Village One Product (OVOP) is an approach to the development potential of the area in the region to produce products that can compete in the global market, while still having unique characteristics of the area. Bulak District is one of the Kenjeran coastal area in Surabaya, Indonesia. Bulak District has had a great potential of marine products, but still contribute greatly in improving the people's welfare. Total activities of SMEs in the District of Bulak quite a lot, but the resulting product unknown to the wider community and the global marketplace. Activity of facilitation for SMEs society do to build community capacity in the implementation of the concept of OVOP. Based on the results of the evaluation assistance through Wilcoxon Signed Ranks Test result an increased understanding of the community regarding to the five subjects related OVOP concept. There are six factors to note in mentoring activities that need to be considered for the sustainability of community capacity building programs on OVOP.

Lean Management—The Journey from Toyota to Healthcare

PubMed Central

Teich, Sorin T.; Faddoul, Fady F.

2013-01-01

The evolution of production systems is tightly linked to the story of Toyota Motor Company (TMC) that has its roots around 1918. The term “lean” was coined in 1990 following the exploration of the Toyota model that led to the “transference” thesis sustaining the concept that manufacturing problems and technologies are universal problems faced by management and that these concepts can be emulated in non-Japanese enterprises. Lean is a multi-faceted concept and requires organizations to exert effort along several dimensions simultaneously; some consider a successful implementation either achieving major strategic components of lean, implementing practices to support operational aspects, or providing evidence that the improvements are sustainable in the long term. The article explores challenges and opportunities faced by organizations that intend incorporating lean management principles and presents the specific context of the healthcare industry. Finally, the concepts of “essential few” and customer value are illustrated through a simple example of process change following lean principles, which was implemented in a dental school in the United States. PMID:23908857

Lean management-the journey from toyota to healthcare.

PubMed

Teich, Sorin T; Faddoul, Fady F

2013-04-01

The evolution of production systems is tightly linked to the story of Toyota Motor Company (TMC) that has its roots around 1918. The term "lean" was coined in 1990 following the exploration of the Toyota model that led to the "transference" thesis sustaining the concept that manufacturing problems and technologies are universal problems faced by management and that these concepts can be emulated in non-Japanese enterprises. Lean is a multi-faceted concept and requires organizations to exert effort along several dimensions simultaneously; some consider a successful implementation either achieving major strategic components of lean, implementing practices to support operational aspects, or providing evidence that the improvements are sustainable in the long term. The article explores challenges and opportunities faced by organizations that intend incorporating lean management principles and presents the specific context of the healthcare industry. Finally, the concepts of "essential few" and customer value are illustrated through a simple example of process change following lean principles, which was implemented in a dental school in the United States.

Equipment concept design and development plans for microgravity science and applications research on space station: Combustion tunnel, laser diagnostic system, advanced modular furnace, integrated electronics laboratory

NASA Technical Reports Server (NTRS)

Uhran, M. L.; Youngblood, W. W.; Georgekutty, T.; Fiske, M. R.; Wear, W. O.

1986-01-01

Taking advantage of the microgravity environment of space NASA has initiated the preliminary design of a permanently manned space station that will support technological advances in process science and stimulate the development of new and improved materials having applications across the commercial spectrum. Previous studies have been performed to define from the researcher's perspective, the requirements for laboratory equipment to accommodate microgravity experiments on the space station. Functional requirements for the identified experimental apparatus and support equipment were determined. From these hardware requirements, several items were selected for concept designs and subsequent formulation of development plans. This report documents the concept designs and development plans for two items of experiment apparatus - the Combustion Tunnel and the Advanced Modular Furnace, and two items of support equipment the Laser Diagnostic System and the Integrated Electronics Laboratory. For each concept design, key technology developments were identified that are required to enable or enhance the development of the respective hardware.

Struggling to understand abstract science topics: a Roundhouse diagram-based study

NASA Astrophysics Data System (ADS)

Ward, Robin E.; Wandersee, James H.

2002-06-01

This study explored the effects of Roundhouse diagram construction on a previously low-performing middle school science student's struggles to understand abstract science concepts and principles. It is based on a metacognition-based visual learning model proposed by Wandersee in 1994. Ward and Wandersee introduced the Roundhouse diagram strategy and showed how it could be applied in science education. This article aims at elucidating the process by which Roundhouse diagramming helps learners bootstrap their current understandings to reach the intended meaningful understanding of complex science topics. The main findings of this study are that (a) it is crucial that relevant prior knowledge and dysfunctional alternative conceptions not be ignored during new learning if low-performing science students are to understand science well; (b) as the student's mastery of the Roundhouse diagram construction improved, so did science achievement; and (c) the student's apt choice of concept-related visual icons aided progress toward meaningful understanding of complex science concepts.

Integrated Aerodynamic/Structural/Dynamic Analyses of Aircraft with Large Shape Changes

NASA Technical Reports Server (NTRS)

Samareh, Jamshid A.; Chwalowski, Pawel; Horta, Lucas G.; Piatak, David J.; McGowan, Anna-Maria R.

2007-01-01

The conceptual and preliminary design processes for aircraft with large shape changes are generally difficult and time-consuming, and the processes are often customized for a specific shape change concept to streamline the vehicle design effort. Accordingly, several existing reports show excellent results of assessing a particular shape change concept or perturbations of a concept. The goal of the current effort was to develop a multidisciplinary analysis tool and process that would enable an aircraft designer to assess several very different morphing concepts early in the design phase and yet obtain second-order performance results so that design decisions can be made with better confidence. The approach uses an efficient parametric model formulation that allows automatic model generation for systems undergoing radical shape changes as a function of aerodynamic parameters, geometry parameters, and shape change parameters. In contrast to other more self-contained approaches, the approach utilizes off-the-shelf analysis modules to reduce development time and to make it accessible to many users. Because the analysis is loosely coupled, discipline modules like a multibody code can be easily swapped for other modules with similar capabilities. One of the advantages of this loosely coupled system is the ability to use the medium-to high-fidelity tools early in the design stages when the information can significantly influence and improve overall vehicle design. Data transfer among the analysis modules are based on an accurate and automated general purpose data transfer tool. In general, setup time for the integrated system presented in this paper is 2-4 days for simple shape change concepts and 1-2 weeks for more mechanically complicated concepts. Some of the key elements briefly described in the paper include parametric model development, aerodynamic database generation, multibody analysis, and the required software modules as well as examples for a telescoping wing, a folding wing, and a bat-like wing.

Report to the U.S. Congress on the National Oceanographic Partnership Program

DTIC Science & Technology

1999-01-01

security, advancing economic development, protecting quality of life, and strengthening science education and communication through improved knowledge of... nitrate analyzers, and spectral optical sensors) will be tested on testbed moorings near Bermuda and Monterey Bay. The newly developed systems...design, systems integration, interdisciplinary multiscale data assimilation and interactive processes. real-time demonstration of concept and analysis of

Practitioner Perceptions of the A3 Method for Process Improvement in Health Care

ERIC Educational Resources Information Center

Visich, John K.; Wicks, Angela M.; Zalila, Faiza

2010-01-01

The focus of this article is to present students' perceptions of the recently developed A3 method, a structured problem-solving approach based on lean concepts and tools that have been adapted to the health care environment. The students were all employees of a large health care provider and were enrolled in a customized health care executive MBA…

The Rationale for a Wider Concept of Inclusive Education for Teacher Education: A Case Study of Serbia

ERIC Educational Resources Information Center

Macura-Milovanovic, Suncica; Pantic, Natasa; Closs, Alison

2012-01-01

Teacher education for inclusive education (IE) is recognized as vital for improving quality and equity in education globally. In the Western Balkan countries it is also part of the transition process towards joining the European Union and has attracted international funding for IE-related projects. A key finding from research funded by the…

Engaging ESP Students with Brain-Based Learning for Improved Listening Skills, Vocabulary Retention and Motivation

ERIC Educational Resources Information Center

Salem, Ashraf Atta Mohamed Safein

2017-01-01

The concept of teaching and learning has changed drastically over the past few years by the virtue of both research results carried out in the fields of second/foreign language learning and acquisition. Of all these researches, findings related to the brain structure and functions in cooperation with cognitive aspects of the education process,…

Coordinated crew performance in commercial aircraft operations

NASA Technical Reports Server (NTRS)

Murphy, M. R.

1977-01-01

A specific methodology is proposed for an improved system of coding and analyzing crew member interaction. The complexity and lack of precision of many crew and task variables suggest the usefulness of fuzzy linguistic techniques for modeling and computer simulation of the crew performance process. Other research methodologies and concepts that have promise for increasing the effectiveness of research on crew performance are identified.

From Brainstorming to C-Sketch to Principles of Historical Innovators: Ideation Techniques to Enhance Student Creativity

ERIC Educational Resources Information Center

White, Christina; Wood, Kristin; Jensen, Dan

2012-01-01

The heart and soul of engineering is innovation and our ability to improve the human condition through design. To enrich engineering education, it is critical that we advance our teaching in innovation and design processes. This research focuses on the ideation component of innovation through the investigation of a suite of concept generation…

A systemic approach for modeling soil functions

NASA Astrophysics Data System (ADS)

Vogel, Hans-Jörg; Bartke, Stephan; Daedlow, Katrin; Helming, Katharina; Kögel-Knabner, Ingrid; Lang, Birgit; Rabot, Eva; Russell, David; Stößel, Bastian; Weller, Ulrich; Wiesmeier, Martin; Wollschläger, Ute

2018-03-01

The central importance of soil for the functioning of terrestrial systems is increasingly recognized. Critically relevant for water quality, climate control, nutrient cycling and biodiversity, soil provides more functions than just the basis for agricultural production. Nowadays, soil is increasingly under pressure as a limited resource for the production of food, energy and raw materials. This has led to an increasing demand for concepts assessing soil functions so that they can be adequately considered in decision-making aimed at sustainable soil management. The various soil science disciplines have progressively developed highly sophisticated methods to explore the multitude of physical, chemical and biological processes in soil. It is not obvious, however, how the steadily improving insight into soil processes may contribute to the evaluation of soil functions. Here, we present to a new systemic modeling framework that allows for a consistent coupling between reductionist yet observable indicators for soil functions with detailed process understanding. It is based on the mechanistic relationships between soil functional attributes, each explained by a network of interacting processes as derived from scientific evidence. The non-linear character of these interactions produces stability and resilience of soil with respect to functional characteristics. We anticipate that this new conceptional framework will integrate the various soil science disciplines and help identify important future research questions at the interface between disciplines. It allows the overwhelming complexity of soil systems to be adequately coped with and paves the way for steadily improving our capability to assess soil functions based on scientific understanding.

Automated Semantic Indexing of Figure Captions to Improve Radiology Image Retrieval

PubMed Central

Kahn, Charles E.; Rubin, Daniel L.

2009-01-01

Objective We explored automated concept-based indexing of unstructured figure captions to improve retrieval of images from radiology journals. Design The MetaMap Transfer program (MMTx) was used to map the text of 84,846 figure captions from 9,004 peer-reviewed, English-language articles to concepts in three controlled vocabularies from the UMLS Metathesaurus, version 2006AA. Sampling procedures were used to estimate the standard information-retrieval metrics of precision and recall, and to evaluate the degree to which concept-based retrieval improved image retrieval. Measurements Precision was estimated based on a sample of 250 concepts. Recall was estimated based on a sample of 40 concepts. The authors measured the impact of concept-based retrieval to improve upon keyword-based retrieval in a random sample of 10,000 search queries issued by users of a radiology image search engine. Results Estimated precision was 0.897 (95% confidence interval, 0.857–0.937). Estimated recall was 0.930 (95% confidence interval, 0.838–1.000). In 5,535 of 10,000 search queries (55%), concept-based retrieval found results not identified by simple keyword matching; in 2,086 searches (21%), more than 75% of the results were found by concept-based search alone. Conclusion Concept-based indexing of radiology journal figure captions achieved very high precision and recall, and significantly improved image retrieval. PMID:19261938

The potential of value management (VM) to improve the consideration of energy efficiency within pre-construction

NASA Astrophysics Data System (ADS)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Rajemi, Mohamad Farizal

2016-08-01

Energy demand and consumption in buildings will rise rapidly in the near future because of several social economics factors and this situation occurs not only in developed countries but also in developing countries such as Malaysia. There is demand towards building with energy efficiency features at this time, however most of the current buildings types are still being constructed with conventional designs, thus contribute to inefficient of energy consumption during the operation stage of the building. This paper presents the concept and the application of Value Management (VM) approach and its potential to improve consideration of energy efficiency within pre-construction process. Based on the relevant literatures, VM has provides an efficient and effective delivery system to fulfill the objectives and client's requirements. Generally in this paper, VM is discussed and scrutinized with reference to previous studies to see how these concepts contribute to better optimize the energy consumption in a building by seeking the best value energy efficiency through the design and construction process. This paper will not draw any conclusion but rather a preliminary research to propose the most energy efficiency measures to reliably accomplish a function that will meet the client's needs, desires and expectations. For further research in future, simple quantitative industry survey and VM workshops will be conducted to validate and further improve the research.

Phase 1A Final Report for the AREVA Team Enhanced Accident Tolerant Fuels Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrell, Mike E.

In response to the Department of Energy (DOE) funded initiative to develop and deploy lead fuel assemblies (LFAs) of Enhanced Accident Tolerant Fuel (EATF) into a US reactor within 10 years, AREVA put together a team to develop promising technologies for improved fuel performance during off normal operations. This team consisted of the University of Florida (UF) and the University of Wisconsin (UW), Savannah River National Laboratory (SRNL), Duke Energy and Tennessee Valley Authority (TVA). This team brought broad experience and expertise to bear on EATF development. AREVA has been designing; manufacturing and testing nuclear fuel for over 50 yearsmore » and is one of the 3 large international companies supplying fuel to the nuclear industry. The university and National Laboratory team members brought expertise in nuclear fuel concepts and materials development. Duke and TVA brought practical utility operating experience. This report documents the results from the initial “discovery phase” where the team explored options for EATF concepts that provide enhanced accident tolerance for both Design Basis (DB) and Beyond Design Basis Events (BDB). The main driver for the concepts under development were that they could be implemented in a 10 year time frame and be economically viable and acceptable to the nuclear fuel marketplace. The economics of fuel design make this DOE funded project very important to the nuclear industry. Even incremental changes to an existing fuel design can cost in the range of $100M to implement through to LFAs. If this money is invested evenly over 10 years then it can take the fuel vendor several decades after the start of the project to recover their initial investment and reach a breakeven point on the initial investment. Step or radical changes to a fuel assembly design can cost upwards of $500M and will take even longer for the fuel vendor to recover their investment. With the projected lifetimes of the current generation of nuclear power plants large scale investment by the fuel vendors is difficult to justify. Specific EATF enhancements considered by the AREVA team were; Improved performance in DB and BDB conditions; Reduced release to the environment in a catastrophic accident; Improved performance during normal operating conditions; Improved performance if US reactors start to load follow; Equal or improved economics of the fuel; and Improvements to the fuel behavior to support future transportation and storage of the used nuclear fuel (UNF). In pursuit of the above enhancements, EATF technology concepts that our team considered were; Additives to the fuel pellets which included; Chromia doping to increase fission gas retention. Chromia doping has the potential to improve load following characteristics, improve performance of the fuel pellet during clad failure, and potentially lock up cesium into the fuel matrix; Silicon Carbide (SiC) Fibers to improve thermal heat transfer in normal operating conditions which also improves margin in accident conditions and the potential to lock up iodine into the fuel matrix; Nano-diamond particles to enhance thermal conductivity; Coatings on the fuel cladding; and Nine coatings on the existing Zircaloy cladding to increase coping time and reduce clad oxidation and hydrogen generation during accident conditions, as well as reduce hydrogen pickup and mitigate hydride reorientation in the cladding. To facilitate the development process AREVA adopted a formal “Gate Review Process” (GR) that was used to review results and focus resources onto promising technologies to reduce costs and identify the technologies that would potentially be carried forward to LFAs within a 10 year period. During the initial discovery phase of the project AREVA took the decision to be relatively hands off and allow our university and National Laboratory partners to be free thinking and consider options that would not be constrained by preconceived ideas from the fuel vendor. To counter this and to keep the partners focused, the GR process was utilized. During this GR process each of the team members presented their findings to a board made up of technical experts from utilities, fuel manufacturing experts, fuel technical experts, and fuel research and development (R&D) experts. During the initial 2 years of the project there were several major accomplishments. These accomplishments, along with the implications for successfully implementing EATF, are; The experimental spark plasma sintering process (SPS) process was successfully used to produce fuel pellets containing either 10% SiC whiskers or nano-diamond particles. The ability to use this process enables the thermal margin enhancements of the fuel additives to be realized. Without the SPS process, the conventional process cannot support adding pellet additives in the required quantities; Coatings of Ti2AlC were successfully applied to Zircaloy-4 cladding. Testing of Ti2AlC coatings at Loss of Cooling Accident (LOCA) conditions showed reduced cladding oxidation compared to present un-coated Zircaloy-4 cladding. This achievement allows the presently used cladding system to be retained so that the 10 year schedule can be met. Having to implement a new cladding material will extend the development schedule beyond 10 years; Several documents were produced to support future development, testing, and licensing of EATF, including a design requirements traceability matrix, a draft business plan, a draft test plan, a draft regulatory plan, and the acceptance criteria for lead fuel assembly insertion into a commercial reactor. This preparatory work lays the foundation for ensuring the future development plans address all the areas required to test, license, and manufacture the new EATF; and In addition, the high velocity oxy-fuel and electrophoretic deposition (EPD) coating application processes were dropped from further consideration due to their inability to meet manufacturing criteria. This allows the resources to be focused on the most promising EATF concepts identified. Future development opportunities that were identified during this work include; The use of SiC or diamond requires that a new pellet production technique (Spark Plasma Sintering), be developed. This entails investment in developing, proving and implementing a new commercial pellet production process. Development of the process to apply thinner coatings is required; Coatings cannot be too “thick” or they will displace a significant volume of water in the core resulting in reduced thermal hydraulic characteristics; Application of the coating at high temperature can affect the Zircaloy substrate. This will require the development and implementation of a new cladding coating manufacturing process; and Replace the Cold Spray (CS) cladding coating application with the Physical Vapor Deposition (PVD) process to eliminate duplication of work and provide greater control over coating thicknesses. This can result in a reduction in the final cycle economic penalty of coatings.« less

CFDP Evolutions and File Based Operations

NASA Astrophysics Data System (ADS)

Valverde, Alberto; Taylor, Chris; Magistrati, Giorgio; Maiorano, Elena; Colombo, Cyril; Haddow, Colin

2015-09-01

The complexity of the scientific ESA missions in terms of data handling requirements has been steadily increasing in the last years. The availability of high speed telemetry links to ground, the increase on the data storage capacity, as well as the processing performance of the spacecraft avionics have enabled this process. Nowadays, it is common to find missions with hundreds of gigabytes of daily on-board generated data, with terabytes of on-board mass memories and with downlinks of several hundreds of megabits per second. This technological trends push an upgrade on the spacecraft data handling and operation concept, smarter solutions are needed to sustain such high data rates and volumes, while improving the on-board autonomy and easing operations. This paper describes the different activities carried out to adapt to the new data handling scenario. It contains an analysis of the proposed operations concept for file-based spacecrafts, including the updates on the PUS and CFDP standards.

Middle Man Concept for In-Orbit Collision Risks Mitigation, CAESAR and CARA Examples

NASA Technical Reports Server (NTRS)

Moury, Monique; Newman, Lauri K.; Laporte, Francois

2014-01-01

This paper describes the conjunction analysis which has to be performed using data provided by JSpOC. This description not only demonstrates that Collision Avoidance is a 2- step process (close approach detection followed by risk evaluation for collision avoidance decision) but also leads to the conclusion that there is a need for a Middle Man role. After describing the Middle Man concept, this paper introduces two examples with their similarities and particularities: the American civil space effort delivered by the NASA CARA team (Conjunction Assessment Risk Analysis) and the French response CAESAR (Conjunction Assessment and Evaluation Service: Alerts and Recommendations). For both, statistics are presented and feedbacks discussed. All together, around 80 satellites are served by CARA and/or CAESAR. Both processes regularly evolve in order either to follow JSpOC upgrades or to improve analysis according to experience acquired during the past years.

Development of inquiry behavior in concept identification.

PubMed

Vassilopoulos, C A; Dickerson, D J

1992-08-01

We studied inquiry behavior in concept identification in first-, fifth-, eighth-grade, and college students with problems involving eight four-letter strings. The task was to identify the correct string by asking questions related to either one letter or four letters that were answered by yes or no. Processing demands were manipulated by comparing (a) a condition in which letter strings were removed from view as feedback eliminated them as possible solutions with a condition in which strings remained in view and (b) problems that were structured so that relevant letter categories were easy to identify with problems that were not. Problem solving generally improved with age. First graders tended to ask questions that eliminated solutions one by one, whereas the older groups asked more informative questions. At the three upper grade levels, strategies for selecting queries were adapted to situations, with less demanding strategies being used when processing demands were higher.

A case-based reasoning tool for breast cancer knowledge management with data mining concepts and techniques

NASA Astrophysics Data System (ADS)

Demigha, Souâd.

2016-03-01

The paper presents a Case-Based Reasoning Tool for Breast Cancer Knowledge Management to improve breast cancer screening. To develop this tool, we combine both concepts and techniques of Case-Based Reasoning (CBR) and Data Mining (DM). Physicians and radiologists ground their diagnosis on their expertise (past experience) based on clinical cases. Case-Based Reasoning is the process of solving new problems based on the solutions of similar past problems and structured as cases. CBR is suitable for medical use. On the other hand, existing traditional hospital information systems (HIS), Radiological Information Systems (RIS) and Picture Archiving Information Systems (PACS) don't allow managing efficiently medical information because of its complexity and heterogeneity. Data Mining is the process of mining information from a data set and transform it into an understandable structure for further use. Combining CBR to Data Mining techniques will facilitate diagnosis and decision-making of medical experts.

A Diagram Editor for Efficient Biomedical Knowledge Capture and Integration

PubMed Central

Yu, Bohua; Jakupovic, Elvis; Wilson, Justin; Dai, Manhong; Xuan, Weijian; Mirel, Barbara; Athey, Brian; Watson, Stanley; Meng, Fan

2008-01-01

Understanding the molecular mechanisms underlying complex disorders requires the integration of data and knowledge from different sources including free text literature and various biomedical databases. To facilitate this process, we created the Biomedical Concept Diagram Editor (BCDE) to help researchers distill knowledge from data and literature and aid the process of hypothesis development. A key feature of BCDE is the ability to capture information with a simple drag-and-drop. This is a vast improvement over manual methods of knowledge and data recording and greatly increases the efficiency of the biomedical researcher. BCDE also provides a unique concept matching function to enforce consistent terminology, which enables conceptual relationships deposited by different researchers in the BCDE database to be mined and integrated for intelligible and useful results. We hope BCDE will promote the sharing and integration of knowledge from different researchers for effective hypothesis development. PMID:21347131

Signal processing for distributed sensor concept: DISCO

NASA Astrophysics Data System (ADS)

Rafailov, Michael K.

2007-04-01

Distributed Sensor concept - DISCO proposed for multiplication of individual sensor capabilities through cooperative target engagement. DISCO relies on ability of signal processing software to format, to process and to transmit and receive sensor data and to exploit those data in signal synthesis process. Each sensor data is synchronized formatted, Signal-to-Noise Ration (SNR) enhanced and distributed inside of the sensor network. Signal processing technique for DISCO is Recursive Adaptive Frame Integration of Limited data - RAFIL technique that was initially proposed [1] as a way to improve the SNR, reduce data rate and mitigate FPA correlated noise of an individual sensor digital video-signal processing. In Distributed Sensor Concept RAFIL technique is used in segmented way, when constituencies of the technique are spatially and/or temporally separated between transmitters and receivers. Those constituencies include though not limited to two thresholds - one is tuned for optimum probability of detection, the other - to manage required false alarm rate, and limited frame integration placed somewhere between the thresholds as well as formatters, conventional integrators and more. RAFIL allows a non-linear integration that, along with SNR gain, provides system designers more capability where cost, weight, or power considerations limit system data rate, processing, or memory capability [2]. DISCO architecture allows flexible optimization of SNR gain, data rates and noise suppression on sensor's side and limited integration, re-formatting and final threshold on node's side. DISCO with Recursive Adaptive Frame Integration of Limited data may have flexible architecture that allows segmenting the hardware and software to be best suitable for specific DISCO applications and sensing needs - whatever it is air-or-space platforms, ground terminals or integration of sensors network.

Fuel Cell/Reformers Technology Development

NASA Technical Reports Server (NTRS)

2004-01-01

NASA Glenn Research Center is interested in developing Solid Oxide Fuel Cell for use in aerospace applications. Solid oxide fuel cell requires hydrogen rich feed stream by converting commercial aviation jet fuel in a fuel processing process. The grantee's primary research activities center on designing and constructing a test facility for evaluating injector concepts to provide optimum feeds to fuel processor; collecting and analyzing literature information on fuel processing and desulfurization technologies; establishing industry and academic contacts in related areas; providing technical support to in-house SOFC-based system studies. Fuel processing is a chemical reaction process that requires efficient delivery of reactants to reactor beds for optimum performance, i.e., high conversion efficiency and maximum hydrogen production, and reliable continuous operation. Feed delivery and vaporization quality can be improved by applying NASA's expertise in combustor injector design. A 10 KWe injector rig has been designed, procured, and constructed to provide a tool to employ laser diagnostic capability to evaluate various injector concepts for fuel processing reactor feed delivery application. This injector rig facility is now undergoing mechanical and system check-out with an anticipated actual operation in July 2004. Multiple injector concepts including impinging jet, venturi mixing, discrete jet, will be tested and evaluated with actual fuel mixture compatible with reforming catalyst requirement. Research activities from September 2002 to the closing of this collaborative agreement have been in the following areas: compiling literature information on jet fuel reforming; conducting autothermal reforming catalyst screening; establishing contacts with other government agencies for collaborative research in jet fuel reforming and desulfurization; providing process design basis for the build-up of injector rig facility and individual injector design.

Environment-friendly cycle time optimization and quality improvisation using Six Sigma.

PubMed

Deshpande, V S; Mungle, N P

2008-07-01

Healthy environment in any organization can make a difference in improving productivity and quality with low defect, lack of concentration, willingness to work, minimum accidental problems etc. Six Sigma is one of the more recent quality improvement initiatives to gain popularity and acceptance in many industries across the globe. It is an alternative to TQM to obtain minimum manufacturing defect, cycle time reduction, cost reduction, inventory reduction etc. Its use is increasingly widespread in many industries, in both manufacturing and service industries with many proponents of the approach claiming that it has developed beyond a quality control approach into a broader process improvement concept.

Demonstrating PQS Effectiveness and Driving Continual Improvement: Evidence-Based Risk Reduction.

PubMed

Ramnarine, Emma; O'Donnell, Kevin

2018-04-18

Product knowledge grows and evolves during the life of a product. In order to maintain a state of control and deliver product with consistent quality throughout its commercial life, continuous improvement and product lifecycle management become essential. The practical link between product and process knowledge, risk-based control strategies, and continual improvement and innovation can be made stronger through evidence-based risk reduction. Regulatory relief and flexibility in post approval change management and overall product lifecycle management will only be possible with effective application of science and risk-based concepts and demonstrated effectiveness of the PQS in assuring a state of control. Copyright © 2018, Parenteral Drug Association.

Tire Recycling

NASA Technical Reports Server (NTRS)

1997-01-01

Cryopolymers, Inc. tapped NASA expertise to improve a process for recycling vehicle tires by converting shredded rubber into products that can be used in asphalt road beds, new tires, hoses, and other products. In conjunction with the Southern Technology Applications Center and Stennis Space Center, NASA expertise in cryogenic fuel-handling needed for launch vehicle and spacecraft operations was called upon to improve the recycling concept. Stennis advised Cryopolymers on the type of equipment required, as well as steps to reduce the amount of liquid nitrogen used in the process. They also guided the company to use more efficient ways to control system hardware. It is estimated that more than 300 million tires nationwide are produced per year. Cryopolymers expects to reach a production rate of 5,000 tires recycled per day.

Using data to make decisions and drive results: a LEAN implementation strategy.

PubMed

Panning, Rick

2005-03-28

During the process of facility planning, Fairview Laboratory Services utilized LEAN manufacturing to maximize efficiency, simplify processes, and improve laboratory support of patient care services. By incorporating the LEAN program's concepts in our pilot program, we were able to reduce turnaround time by 50%, improve productivity by greater than 40%, reduce costs by 31%, save more than 440 square feet of space, standardize work practices, reduce errors and error potential, continuously measure performance, eliminate excess unused inventory and visual noise, and cross-train 100% of staff in the core laboratory. In addition, we trained a core team of people that is available to coordinate future LEAN projects in the laboratory and other areas of the organization.

Understanding Transitions to Promote Student Success: A Concept Analysis.

PubMed

Hart, Julie A; Swenty, Constance F

2016-07-01

The purpose of this analysis is to provide an extensive exploration of the concept of transitions, specifically within the context of nursing students. Transitions are a universal part of life. The concept of transitions is rooted in disciplines such as anthropology, sociology, psychology, and business. Transitions are also a central theme in nursing. While various definitions of the concept exist, most agree that transitions involve a process, which over time results in transformation of self. Walker and Avant's eight-step method of concept analysis served as the framework for exploration of the concept. The databases Cumulative Index to Nursing and Allied Health Literature, MEDLINE, Education Resources Information Center, ProQuest, and Academic Search Premiere were searched using the search terms transition, transitions, transformation, nursing students, anxiety, and clinical education. Quantitative and qualitative studies, published concept analysis, and transition theory articles were included. During a transition, people experience stress and anxiety. This applies to nursing students as well, who often report much stress and anxiety upon entering the initial clinical experience. However, consequences of a successful transition include increased knowledge, attainment of new skills, and identify reformation. By understanding the concept, nurse educators can develop effective teaching strategies to facilitate successful transitions, which will improve the educational experience, support student retention, and promote graduation of competent practitioners. Hart Swenty. © 2015 Wiley Periodicals, Inc.

Use of Networked Collaborative Concept Mapping To Measure Team Processes and Team Outcomes.

ERIC Educational Resources Information Center

Chung, Gregory K. W. K.; O'Neil, Harold F., Jr.; Herl, Howard E.; Dennis, Robert A.

The feasibility of using a computer-based networked collaborative concept mapping system to measure teamwork skills was studied. A concept map is a node-link-node representation of content, where the nodes represent concepts and links represent relationships between connected concepts. Teamwork processes were examined for a group concept mapping…

Conceptualising and creating a global learning health system.

PubMed

Friedman, Charles; Rigby, Michael

2013-04-01

In any country the health sector is important in terms of human wellbeing and large in terms of economics. The health sector might therefore be expected to be a finely tuned enterprise, utilising corporate knowledge in a constant process of critically reviewing and improving its activities and processes. However, this is seldom the case. Health systems and practice are highly variable and lag behind research discovery. This contrasts strongly with commercial bodies, and particularly service industries, where the concept of the learning organisation is strongly seen as the key to optimisation. A learning organisation accesses for analytic purposes operational data, which though captured and recorded for day-to-day transactions at the customer level, become also the basis of understanding changes in both demand and delivery process. In health care, the concept of the learning organisation is well grounded ethically. Anything which can improve health, including understanding of optimal care delivery processes and how to improve longer term outcomes, should be seized upon to drive service improvement - but currently this occurs haphazardly. The limitations of paper-based systems, priority given to digitalization of financial transactions, concerns about electronic data insecurity, and other factors have inhibited progress towards organisational learning at a national scale. But in recent years, new means of capturing, managing, and exchanging data have created new opportunities, while ever increasing pressures on health systems have produced strengthened incentive. In the United States, the current policy and investment impetus to electronic health records and concomitantly their 'meaningful use' create opportunities to build the foundations for data re-use for corporate learning - and thus for societal gain. In Europe and other settings there are islands of innovation, but not yet a coherent culture or impetus to build foundations for a learning health system. This paper considers how to move forward, in the light of the urgent need for smarter health systems where experience becomes the fuel for rapid improvement, and best practices are routinely identified and applied. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The merging of fatigue and fracture mechanics concepts: a historical perspective

NASA Astrophysics Data System (ADS)

Newman, J. C.

1998-07-01

In this review, some of the technical developments that have occurred during the past 40 years are presented which have led to the merger of fatigue and fracture mechanics concepts. This review is made from the viewpoint of “crack propagation”. As methods to observe the “fatigue” process have improved, the formation of fatigue micro-cracks have been observed earlier in life and the measured crack sizes have become smaller. These observations suggest that fatigue damage can now be characterized by “crack size”. In parallel, the crack-growth analysis methods, using stress-intensity factors, have also improved. But the effects of material inhomogeneities, crack-fracture mechanisms, and nonlinear behavior must now be included in these analyses. The discovery of crack-closure mechanisms, such as plasticity, roughness, and oxide/corrosion/fretting product debris, and the use of the effective stress-intensity factor range, has provided an engineering tool to predict small- and large-crack-growth rate behavior under service loading conditions. These mechanisms have also provided a rationale for developing new, damage-tolerant materials. This review suggests that small-crack growth behavior should be viewed as typical behavior, whereas large-crack threshold behavior should be viewed as the anomaly. Small-crack theory has unified “fatigue” and “fracture mechanics” concepts; and has bridged the gap between safe-life and durability/damage-tolerance design concepts.

The Merging of Fatigue and Fracture Mechanics Concepts: A Historical Perspective

NASA Technical Reports Server (NTRS)

Newman, James C., Jr.

1997-01-01

The seventh Jerry L. Swedlow Memorial Lecture presents a review of some of the technical developments, that have occurred during the past 40 years, which have led to the merger of fatigue and fracture mechanics concepts. This review is made from the viewpoint of 'crack propagation.' As methods to observe the 'fatigue' process have improved, the formation of fatigue micro-cracks have been observed earlier in life and the measured crack sizes have become smaller. These observations suggest that fatigue damage can now be characterized by 'crack size.' In parallel, the crack-growth analysis methods, using stress-intensity factors, have also improved. But the effects of material inhomogeneities, crack-fracture mechanisms, and nonlinear behavior must now be included in these analyses. The discovery of crack-closure mechanisms, such as plasticity, roughness, and oxide/corrosion/fretting product debris, and the use of the effective stress-intensity factor range, has provided an engineering tool to predict small- and large-crack-growth rate behavior under service loading, conditions. These mechanisms have also provided a rationale for developing, new, damage-tolerant materials. This review suggests that small-crack growth behavior should be viewed as typical behavior, whereas large-crack threshold behavior should be viewed as the anomaly. Small-crack theory has unified 'fatigue' and 'fracture mechanics' concepts; and has bridged the cap between safe-life and durability/damage-tolerance design concepts.

Friction Stir Processing of Copper-Coated SiC Particulate-Reinforced Aluminum Matrix Composite

PubMed Central

Huang, Chih-Wei; Aoh, Jong-Ning

2018-01-01

In the present work, we proposed a novel friction stir processing (FSP) to produce a locally reinforced aluminum matrix composite (AMC) by stirring copper-coated SiC particulate reinforcement into Al6061 alloy matrix. Electroless-plating process was applied to deposit the copper surface coating on the SiC particulate reinforcement for the purpose of improving the interfacial adhesion between SiC particles and Al matrix. The core-shell SiC structure provides a layer for the atomic diffusion between aluminum and copper to enhance the cohesion between reinforcing particles and matrix on one hand, the dispersion of fine copper in the Al matrix during FSP provides further dispersive strengthening and solid solution strengthening, on the other hand. Hardness distribution and tensile results across the stir zone validated the novel concept in improving the mechanical properties of AMC that was realized via FSP. Optical microscope (OM) and Transmission Electron Microscopy (TEM) investigations were conducted to investigate the microstructure. Energy dispersive spectrometer (EDS), electron probe micro-analyzer (EPMA), and X-ray diffraction (XRD) were explored to analyze the atomic inter-diffusion and the formation of intermetallic at interface. The possible strengthening mechanisms of the AMC containing Cu-coated SiC particulate reinforcement were interpreted. The concept of strengthening developed in this work may open a new way of fabricating of particulate reinforced metal matrix composites. PMID:29652846

Comparison of the effects of auditory subliminal stimulation and rational-emotive therapy, separately and combined, on self-concept.

PubMed

Möller, A T; Kotzé, H F; Sieberhagen, K J

1993-02-01

The present study investigated the effects on self-concept of Rational-Emotive Therapy and auditory subliminal stimulation (separately and in combination) on 141 undergraduate students with self-concept problems. They were randomly assigned to one of four groups receiving either Rational-Emotive Therapy, subliminal stimulation, both, or a placebo treatment. Rational-Emotive Therapy significantly improved scores on all the dependent measures (cognition, self-concept, self-esteem, anxiety), except for behavior. Results for the subliminal stimulation group were similar to those of the placebo treatment except for a significant self-concept improvement and a decline in self-concept related irrational cognitions. The combined treatment yielded results similar to those of Rational-Emotive Therapy, with tentative indications of continued improvement in irrational cognitions and self-concept from posttest to follow-up.

Time-based analysis of total cost of patient episodes: a case study of hip replacement.

PubMed

Peltokorpi, Antti; Kujala, Jaakko

2006-01-01

Healthcare in the public and private sectors is facing increasing pressure to become more cost-effective. Time-based competition and work-in-progress have been used successfully to measure and improve the efficiency of industrial manufacturing. Seeks to address this issue. Presents a framework for time based management of the total cost of a patient episode and apply it to the six sigma DMAIC-process development approach. The framework is used to analyse hip replacement patient episodes in Päijät-Häme Hospital District in Finland, which has a catchment area of 210,000 inhabitants and performs an average of 230 hip replacements per year. The work-in-progress concept is applicable to healthcare--notably that the DMAIC-process development approach can be used to analyse the total cost of patient episodes. Concludes that a framework, which combines the patient-in-process and the DMAIC development approach, can be used not only to analyse the total cost of patient episode but also to improve patient process efficiency. Presents a framework that combines patient-in-process and DMAIC-process development approaches, which can be used to analyse the total cost of a patient episode in order to improve patient process efficiency.

Lean Stability augmentation study

NASA Technical Reports Server (NTRS)

Mcvey, J. B.; Kennedy, J. B.

1979-01-01

An analytical and experimental program was conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Three concepts for improving lean stability limits were selected for experimental evaluation among twelve approaches considered. Concepts were selected on the basis of the potential for improving stability limits and achieving emission goals, the technological risks associated with development of practical burners employing the concepts, and the penalties to airline direct operating costs resulting from decreased combustor performance, increased engine cost, increased maintenance cost and increased engine weight associated with implementation of the concepts. Tests of flameholders embodying the selected concepts were conducted.

Spitzer observatory operations: increasing efficiency in mission operations

NASA Astrophysics Data System (ADS)

Scott, Charles P.; Kahr, Bolinda E.; Sarrel, Marc A.

2006-06-01

This paper explores the how's and why's of the Spitzer Mission Operations System's (MOS) success, efficiency, and affordability in comparison to other observatory-class missions. MOS exploits today's flight, ground, and operations capabilities, embraces automation, and balances both risk and cost. With operational efficiency as the primary goal, MOS maintains a strong control process by translating lessons learned into efficiency improvements, thereby enabling the MOS processes, teams, and procedures to rapidly evolve from concept (through thorough validation) into in-flight implementation. Operational teaming, planning, and execution are designed to enable re-use. Mission changes, unforeseen events, and continuous improvement have often times forced us to learn to fly anew. Collaborative spacecraft operations and remote science and instrument teams have become well integrated, and worked together to improve and optimize each human, machine, and software-system element. Adaptation to tighter spacecraft margins has facilitated continuous operational improvements via automated and autonomous software coupled with improved human analysis. Based upon what we now know and what we need to improve, adapt, or fix, the projected mission lifetime continues to grow - as does the opportunity for numerous scientific discoveries.

The use of indicators to improve the quality of intensive care: theoretical aspects and experiences from the Dutch intensive care registry.

PubMed

van der Voort, P H J; van der Veer, S N; de Vos, M L G

2012-10-01

In the concept of total quality management that was originally developed in industry, the use of quality indicators is essential. The implementation of quality indicators in the intensive care unit to improve the quality of care is a complex process. This process can be described in seven subsequent steps of an indicator-based quality improvement (IBQI) cycle. With this IBQI cycle, a continuous quality improvement can be achieved with the use of indicator data in a benchmark setting. After the development of evidence-based indicators, a sense of urgency has to be created, registration should start, raw data must be analysed, feedback must be given, and interpretation and conclusions must be made, followed by a quality improvement plan. The last step is the implementation of changes that needs a sense of urgency, and this completes the IBQI cycle. Barriers and facilitators are found in each step. They should be identified and addressed in a multifaceted quality improvement strategy. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

Is audit research? The relationships between clinical audit and social-research.

PubMed

Hughes, Rhidian

2005-01-01

Quality has an established history in health care. Audit, as a means of quality assessment, is well understood and the existing literature has identified links between audit and research processes. This paper reviews the relationships between audit and research processes, highlighting how audit can be improved through the principles and practice of social research. The review begins by defining the audit process. It goes on to explore salient relationships between clinical audit and research, grouped into the following broad themes: ethical considerations, highlighting responsibilities towards others and the need for ethical review for audit; asking questions and using appropriate methods, emphasising transparency in audit methods; conceptual issues, including identifying problematic concepts, such as "satisfaction", and the importance of reflexivity within audit; emphasising research in context, highlighting the benefits of vignettes and action research; complementary methods, demonstrating improvements for the quality of findings; and training and multidisciplinary working, suggesting the need for closer relationships between researchers and clinical practitioners. Audit processes cannot be considered research. Both audit and research processes serve distinct purposes. Attention to the principles of research when conducting audit are necessary to improve the quality of audit and, in turn, the quality of health care.

The semantic richness of abstract concepts

PubMed Central

Recchia, Gabriel; Jones, Michael N.

2012-01-01

We contrasted the predictive power of three measures of semantic richness—number of features (NFs), contextual dispersion (CD), and a novel measure of number of semantic neighbors (NSN)—for a large set of concrete and abstract concepts on lexical decision and naming tasks. NSN (but not NF) facilitated processing for abstract concepts, while NF (but not NSN) facilitated processing for the most concrete concepts, consistent with claims that linguistic information is more relevant for abstract concepts in early processing. Additionally, converging evidence from two datasets suggests that when NSN and CD are controlled for, the features that most facilitate processing are those associated with a concept's physical characteristics and real-world contexts. These results suggest that rich linguistic contexts (many semantic neighbors) facilitate early activation of abstract concepts, whereas concrete concepts benefit more from rich physical contexts (many associated objects and locations). PMID:23205008

Understanding immunology via engineering design: the role of mathematical prototyping.

PubMed

Klinke, David J; Wang, Qing

2012-01-01

A major challenge in immunology is how to translate data into knowledge given the inherent complexity and dynamics of human physiology. Both the physiology and engineering communities have rich histories in applying computational approaches to translate data obtained from complex systems into knowledge of system behavior. However, there are some differences in how disciplines approach problems. By referring to mathematical models as mathematical prototypes, we aim to highlight aspects related to the process (i.e., prototyping) rather than the product (i.e., the model). The objective of this paper is to review how two related engineering concepts, specifically prototyping and "fitness for use," can be applied to overcome the pressing challenge in translating data into improved knowledge of basic immunology that can be used to improve therapies for disease. These concepts are illustrated using two immunology-related examples. The prototypes presented focus on the beta cell mass at the onset of type 1 diabetes and the dynamics of dendritic cells in the lung. This paper is intended to illustrate some of the nuances associated with applying mathematical modeling to improve understanding of the dynamics of disease progression in humans.

Structural Concepts and Materials for Lunar Exploration Habitats

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Watson, Judith J.; Singhal, Surendra N.

2006-01-01

A new project within the Exploration Systems Mission Directorate s Technology Development Program at NASA involves development of lightweight structures and low temperature mechanisms for Lunar and Mars missions. The Structures and Mechanisms project is to develop advanced structure technology for the primary structure of various pressurized elements needed to implement the Vision for Space Exploration. The goals are to significantly enhance structural systems for man-rated pressurized structures by 1) lowering mass and/or improving efficient volume for reduced launch costs, 2) improving performance to reduce risk and extend life, and 3) improving manufacturing and processing to reduce costs. The targeted application of the technology is to provide for the primary structure of the pressurized elements of the lunar lander for both sortie and outpost missions, and surface habitats for the outpost missions. The paper presents concepts for habitats that support six month (and longer) lunar outpost missions. Both rigid and flexible habitat wall systems are discussed. The challenges of achieving a multi-functional habitat that provides micro-meteoroid, radiation, and thermal protection for explorers are identified.

Concept mapping: Impact on content and organization of technical writing in science

NASA Astrophysics Data System (ADS)

Conklin, Elaine

The purpose of this quasi-experimental study was to compare the relationship between concept mapping and the content and organization of technical writing of ninth grade biology students. All students in the study completed a prewriting assessment. The experimental group received concept map instruction while the control group performed alternate tasks. After instruction, both groups completed the postwriting assessment and mean differences were compared using the t statistic for independent measures. Additionally, scores on the concept map were correlated to the scores on the postwriting assessment using the Pearson correlation coefficient. Finally, attitudes toward using concept mapping as a prewriting strategy were analyzed using the t statistic for repeated measures. Concept mapping significantly improved the depth of content; however, no statistical significance was detected for organization. Students had a significantly positive change in attitude toward using concept mapping to plan a writing assessment, organize information, and think creatively. The findings indicated concept mapping had a positive effect on the students' abilities to select concepts appropriate to respond to a writing prompt, integrate facts into complete thoughts and ideas, and apply it in novel situations. Concept maps appeared to facilitate learning how to process information and transform it into expository writing. Sustained practice in designing concept maps may influence organization as well as content. Developing a systematic approach to synthesize well-organized and coherent arguments in response to a writing task is an invaluable communication skill that has implications for the learner across disciplines and prepares them for higher education and the workforce.

The concept and science process skills analysis in bomb calorimeter experiment as a foundation for the development of virtual laboratory of bomb calorimeter

NASA Astrophysics Data System (ADS)

Kurniati, D. R.; Rohman, I.

2018-05-01

This study aims to analyze the concepts and science process skills in bomb calorimeter experiment as a basis for developing the virtual laboratory of bomb calorimeter. This study employed research and development method (R&D) to gain the answer to the proposed problems. This paper discussed the concepts and process skills analysis. The essential concepts and process skills associated with bomb calorimeter are analyze by optimizing the bomb calorimeter experiment. The concepts analysis found seven fundamental concepts to be concerned in developing the virtual laboratory that are internal energy, burning heat, perfect combustion, incomplete combustion, calorimeter constant, bomb calorimeter, and Black principle. Since the concept of bomb calorimeter, perfect and incomplete combustion created to figure out the real situation and contain controllable variables, in virtual the concepts displayed in the form of simulation. Meanwhile, the last four concepts presented in the form of animation because no variable found to be controlled. The process skills analysis detect four notable skills to be developed that are ability to observe, design experiment, interpretation, and communication skills.

Increasing patient safety and efficiency in transfusion therapy using formal process definitions.

PubMed

Henneman, Elizabeth A; Avrunin, George S; Clarke, Lori A; Osterweil, Leon J; Andrzejewski, Chester; Merrigan, Karen; Cobleigh, Rachel; Frederick, Kimberly; Katz-Bassett, Ethan; Henneman, Philip L

2007-01-01

The administration of blood products is a common, resource-intensive, and potentially problem-prone area that may place patients at elevated risk in the clinical setting. Much of the emphasis in transfusion safety has been targeted toward quality control measures in laboratory settings where blood products are prepared for administration as well as in automation of certain laboratory processes. In contrast, the process of transfusing blood in the clinical setting (ie, at the point of care) has essentially remained unchanged over the past several decades. Many of the currently available methods for improving the quality and safety of blood transfusions in the clinical setting rely on informal process descriptions, such as flow charts and medical algorithms, to describe medical processes. These informal descriptions, although useful in presenting an overview of standard processes, can be ambiguous or incomplete. For example, they often describe only the standard process and leave out how to handle possible failures or exceptions. One alternative to these informal descriptions is to use formal process definitions, which can serve as the basis for a variety of analyses because these formal definitions offer precision in the representation of all possible ways that a process can be carried out in both standard and exceptional situations. Formal process definitions have not previously been used to describe and improve medical processes. The use of such formal definitions to prospectively identify potential error and improve the transfusion process has not previously been reported. The purpose of this article is to introduce the concept of formally defining processes and to describe how formal definitions of blood transfusion processes can be used to detect and correct transfusion process errors in ways not currently possible using existing quality improvement methods.

Patient-Centered Care Transition for Patients Admitted through the ED: Improving Patient and Employee Experience

PubMed Central

Algauer, Andrea; Rivera, Stephanie; Faurote, Robert

2015-01-01

With increasing wait times in emergency departments (ED) across America, there is a need to streamline the inpatient admission process in order to decrease wait times and more important, to increase patient and employee satisfaction. One inpatient unit at New York-Presbyterian Weill Cornell Medical Center initiated a program to help expedite the inpatient admission process from the ED. The goal of the ED Bridge program is to ease the patient's transition from the ED to an inpatient unit by visiting the patient in the ED and introducing and setting expectations for the inpatient environment (i.e. telemetry alarms, roommates, hourly comfort rounds). Along with improving the patient experience, this program intends to improve the collaboration between ED nurses and inpatient nurses. With the continued support of our nurse management, hospital administrators and most important, our staff, this concept is aimed to increase patient satisfaction scores and subsequently employee satisfaction. PMID:28725813

Using human rights for sexual and reproductive health: improving legal and regulatory frameworks

PubMed Central

Kismodi, Eszter; Hilber, Adriane Martin; Lincetto, Ornella; Stahlhofer, Marcus; Gruskin, Sofia

2010-01-01

Abstract This paper describes the development of a tool that uses human rights concepts and methods to improve relevant laws, regulations and policies related to sexual and reproductive health. This tool aims to improve awareness and understanding of States’ human rights obligations. It includes a method for systematically examining the status of vulnerable groups, involving non-health sectors, fostering a genuine process of civil society participation and developing recommendations to address regulatory and policy barriers to sexual and reproductive health with a clear assignment of responsibility. Strong leadership from the ministry of health, with support from the World Health Organization or other international partners, and the serious engagement of all involved in this process can strengthen the links between human rights and sexual and reproductive health, and contribute to national achievement of the highest attainable standard of health. PMID:20616975

Connection, regulation, and care plan innovation: a case study of four nursing homes.

PubMed

Colón-Emeric, Cathleen S; Lekan-Rutledge, Deborah; Utley-Smith, Queen; Ammarell, Natalie; Bailey, Donald; Piven, Mary L; Corazzini, Kirsten; Anderson, Ruth A

2006-01-01

We describe how connections among nursing home staff impact the care planning process using a complexity science framework. We completed six-month case studies of four nursing homes. Field observations (n = 274), shadowing encounters (n = 69), and in-depth interviews (n = 122) of 390 staff at all levels were conducted. Qualitative analysis produced a conceptual/thematic description and complexity science concepts were used to produce conceptual insights. We observed that greater levels of staff connection were associated with higher care plan specificity and innovation. Connection of the frontline nursing staff was crucial for (1) implementation of the formal care plan and (2) spontaneous informal care planning responsive to changing resident needs. Although regulations could theoretically improve cognitive diversity and information flow in care planning, we observed instances of regulatory oversight resulting in less specific care plans and abandonment of an effective care planning process. Interventions which improve staff connectedness may improve resident outcomes.

Materials and manufacturing processes for increased life/reliability. [of turbine wheels

NASA Technical Reports Server (NTRS)

Duttweiler, R. E.

1977-01-01

Improvements in both quality and durability of disk raw material for both military and commercial engines necessitated an entirely new concept in raw material process control which imposes careful selection, screening and sampling of the basic alloy ingredients, followed by careful monitoring of the melting parameters in all phases of the vacuum melting sequence. Special care is taken to preclude solidification conditions that produce adverse levels of segregation. Melt furnaces are routinely cleaned and inspected for contamination. Ingots are also cleaned and inspected before entering the final melt step.

Study of water recovery and solid waste processing for aerospace and domestic applications. Volume 1: Final report summary

NASA Technical Reports Server (NTRS)

Guarneri, C. A.; Reed, A.; Renman, R. E.

1972-01-01

This study of water reclamation and waste disposal is directed toward a more efficient utilization of natural resources. From an ecological standpoint improved methods of land use, water processing equipment, and ideal population profiles are investigated. Methods are described whereby significant reduction in water usage can be achieved by the adoption of presently available and practically applied technological concepts. Allowances are made for social, natural, and economic contingencies which are likely to occur up to the year 2000.

Preventing intensive care unit delirium: a patient-centered approach to reducing sleep disruption.

PubMed

Stuck, Amy; Clark, Mary Jo; Connelly, Cynthia D

2011-01-01

Delirium in the intensive care unit is a disorder with multifactorial causes and is associated with poor outcomes. Sleep-wake disturbance is a common experience for patients with delirium. Care processes that disrupt sleep can lead to sleep deprivation, contributing to delirium. Patient-centered care is a concept that considers what is best for each individual. How can clinicians use a patient-centered approach to alter processes to decrease patient disruptions and improve sleep and rest? Could timing of blood draws and soothing music work to promote sleep?

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Raster Data Partitioning for Supporting Distributed GIS Processing

NASA Astrophysics Data System (ADS)

Nguyen Thai, B.; Olasz, A.

2015-08-01

In the geospatial sector big data concept also has already impact. Several studies facing originally computer science techniques applied in GIS processing of huge amount of geospatial data. In other research studies geospatial data is considered as it were always been big data (Lee and Kang, 2015). Nevertheless, we can prove data acquisition methods have been improved substantially not only the amount, but the resolution of raw data in spectral, spatial and temporal aspects as well. A significant portion of big data is geospatial data, and the size of such data is growing rapidly at least by 20% every year (Dasgupta, 2013). The produced increasing volume of raw data, in different format, representation and purpose the wealth of information derived from this data sets represents only valuable results. However, the computing capability and processing speed rather tackle with limitations, even if semi-automatic or automatic procedures are aimed on complex geospatial data (Kristóf et al., 2014). In late times, distributed computing has reached many interdisciplinary areas of computer science inclusive of remote sensing and geographic information processing approaches. Cloud computing even more requires appropriate processing algorithms to be distributed and handle geospatial big data. Map-Reduce programming model and distributed file systems have proven their capabilities to process non GIS big data. But sometimes it's inconvenient or inefficient to rewrite existing algorithms to Map-Reduce programming model, also GIS data can not be partitioned as text-based data by line or by bytes. Hence, we would like to find an alternative solution for data partitioning, data distribution and execution of existing algorithms without rewriting or with only minor modifications. This paper focuses on technical overview of currently available distributed computing environments, as well as GIS data (raster data) partitioning, distribution and distributed processing of GIS algorithms. A proof of concept implementation have been made for raster data partitioning, distribution and processing. The first results on performance have been compared against commercial software ERDAS IMAGINE 2011 and 2014. Partitioning methods heavily depend on application areas, therefore we may consider data partitioning as a preprocessing step before applying processing services on data. As a proof of concept we have implemented a simple tile-based partitioning method splitting an image into smaller grids (NxM tiles) and comparing the processing time to existing methods by NDVI calculation. The concept is demonstrated using own development open source processing framework.

Multicenter Clinical Trial of the Nucleus® Hybrid™ S8 Cochlear Implant: Final Outcomes

PubMed Central

Gantz, Bruce J; Dunn, Camille; Oleson, Jacob; Hansen, Marlan; Parkinson, Aaron; Turner, Christopher

2015-01-01

Objective The concept expanding electrical speech processing to those with more residual acoustic hearing with a less invasive shorter cochlear implant has been ongoing since 1999. A multi-center study of the Nucleus Hybrid S8 CI took place between 2002–11. This report describes the final outcomes of this clinical trial. Study Design Multi-Center longitudinal single subject design Methods Eighty-seven subjects received a Nucleus® Hybrid™ S8 implant in their poorer ear. Speech perception in quiet (CNC words) and in noise (BKB-SIN) was collected pre- and post-operatively at 3, 6, and 12 months. Subjective questionnaire data using the APHAB was also collected. Results Some level of hearing preservation was accomplished in 98% subjects with 90% maintaining a functional low-frequency pure-tone average (LFPTA) at initial activation. By 12 months, 5 subjects had total hearing loss and 80% of subjects maintained functional hearing. CNC words demonstrated that 82.5% and 87.5% of subjects had significant improvements in the Hybrid and Combined conditions. The majority of had improvements with BKB-SIN. Results also indicated that as long as subjects maintained at least a severe LFPTA, there was significant improvement in speech understanding. Furthermore, all subjects reported positive improvements in hearing in three of the 4 subscales of the APHAB. Conclusion The concept of hybrid speech processing has significant advantages for subjects with residual low-frequency hearing. In this study, the Nucleus® Hybrid™ S8 provided improved word understanding in quiet and noise. Additionally, there appears to be stability of the residual hearing after initial activation of the device. Level of evidence 2c PMID:26756395

Assessing the impact of case sensitivity and term information gain on biomedical concept recognition.

PubMed

Groza, Tudor; Verspoor, Karin

2015-01-01

Concept recognition (CR) is a foundational task in the biomedical domain. It supports the important process of transforming unstructured resources into structured knowledge. To date, several CR approaches have been proposed, most of which focus on a particular set of biomedical ontologies. Their underlying mechanisms vary from shallow natural language processing and dictionary lookup to specialized machine learning modules. However, no prior approach considers the case sensitivity characteristics and the term distribution of the underlying ontology on the CR process. This article proposes a framework that models the CR process as an information retrieval task in which both case sensitivity and the information gain associated with tokens in lexical representations (e.g., term labels, synonyms) are central components of a strategy for generating term variants. The case sensitivity of a given ontology is assessed based on the distribution of so-called case sensitive tokens in its terms, while information gain is modelled using a combination of divergence from randomness and mutual information. An extensive evaluation has been carried out using the CRAFT corpus. Experimental results show that case sensitivity awareness leads to an increase of up to 0.07 F1 against a non-case sensitive baseline on the Protein Ontology and GO Cellular Component. Similarly, the use of information gain leads to an increase of up to 0.06 F1 against a standard baseline in the case of GO Biological Process and Molecular Function and GO Cellular Component. Overall, subject to the underlying token distribution, these methods lead to valid complementary strategies for augmenting term label sets to improve concept recognition.

Has Lean improved organizational decision making?

PubMed

Simons, Pascale; Benders, Jos; Bergs, Jochen; Marneffe, Wim; Vandijck, Dominique

2016-06-13

Purpose - Sustainable improvement is likely to be hampered by ambiguous objectives and uncertain cause-effect relations in care processes (the organization's decision-making context). Lean management can improve implementation results because it decreases ambiguity and uncertainties. But does it succeed? Many quality improvement (QI) initiatives are appropriate improvement strategies in organizational contexts characterized by low ambiguity and uncertainty. However, most care settings do not fit this context. The purpose of this paper is to investigate whether a Lean-inspired change program changed the organization's decision-making context, making it more amenable for QI initiatives. Design/methodology/approach - In 2014, 12 professionals from a Dutch radiotherapy institute were interviewed regarding their perceptions of a Lean program in their organization and the perceived ambiguous objectives and uncertain cause-effect relations in their clinical processes. A survey (25 questions), addressing the same concepts, was conducted among the interviewees in 2011 and 2014. The structured interviews were analyzed using a deductive approach. Quantitative data were analyzed using appropriate statistics. Findings - Interviewees experienced improved shared visions and the number of uncertain cause-effect relations decreased. Overall, more positive (99) than negative Lean effects (18) were expressed. The surveys revealed enhanced process predictability and standardization, and improved shared visions. Practical implications - Lean implementation has shown to lead to greater transparency and increased shared visions. Originality/value - Lean management decreased ambiguous objectives and reduced uncertainties in clinical process cause-effect relations. Therefore, decision making benefitted from Lean increasing QI's sustainability.

High-efficiency cell concepts on low-cost silicon sheets

NASA Technical Reports Server (NTRS)

Bell, R. O.; Ravi, K. V.

1985-01-01

The limitations on sheet growth material in terms of the defect structure and minority carrier lifetime are discussed. The effect of various defects on performance are estimated. Given these limitations designs for a sheet growth cell that will make the best of the material characteristics are proposed. Achievement of optimum synergy between base material quality and device processing variables is proposed. A strong coupling exists between material quality and the variables during crystal growth, and device processing variables. Two objectives are outlined: (1) optimization of the coupling for maximum performance at minimal cost; and (2) decoupling of materials from processing by improvement in base material quality to make it less sensitive to processing variables.

Case studies combined with or without concept maps improve critical thinking in hospital-based nurses: a randomized-controlled trial.

PubMed

Huang, Yu-Chuan; Chen, Hsing-Hsia; Yeh, Mei-Ling; Chung, Yu-Chu

2012-06-01

Critical thinking (CT) is essential to the exercise of professional judgment. As nurses face increasingly complex health-care situations, critical thinking can promote appropriate clinical decision-making and improve the quality of nursing care. This study aimed to evaluate the effects of a program of case studies, alone (CS) or combined with concept maps (CSCM), on improving CT in clinical nurses. The study was a randomized controlled trial. The experimental group participated in a 16-week CSCM program, whereas the control group participated in a CS program of equal duration. A randomized-controlled trial with a multistage randomization process was used to select and to assign participants, ultimately resulting in 67 nurses in each group. Data were collected before and after the program using the California Critical Thinking Skill Test (CCTST) and the California Critical Thinking Disposition Inventory (CCTDI). After the programs, there were significant differences between the two groups in the critical thinking skills of analysis, evaluation, inference, deduction, and induction. There was also an overall significant difference, and a significant difference in the specific disposition of open-mindedness. This study supports the application of case studies combined with concept maps as a hospital-based teaching strategy to promote development of critical thinking skills and encourage dispositions for nurses. The CSCM resulted in greater improvements in all critical thinking skills of as well as the overall and open-minded affective dispositions toward critical thinking, compared with the case studies alone. An obvious improvement in the CSCM participants was the analytic skill and disposition. Further longitudinal studies and data collection from multisite evaluations in a range of geographic locales are warranted. Copyright © 2012 Elsevier Ltd. All rights reserved.