Neural Parallel Engine: A toolbox for massively parallel neural signal processing.

PubMed

Tam, Wing-Kin; Yang, Zhi

2018-05-01

Large-scale neural recordings provide detailed information on neuronal activities and can help elicit the underlying neural mechanisms of the brain. However, the computational burden is also formidable when we try to process the huge data stream generated by such recordings. In this study, we report the development of Neural Parallel Engine (NPE), a toolbox for massively parallel neural signal processing on graphical processing units (GPUs). It offers a selection of the most commonly used routines in neural signal processing such as spike detection and spike sorting, including advanced algorithms such as exponential-component-power-component (EC-PC) spike detection and binary pursuit spike sorting. We also propose a new method for detecting peaks in parallel through a parallel compact operation. Our toolbox is able to offer a 5× to 110× speedup compared with its CPU counterparts depending on the algorithms. A user-friendly MATLAB interface is provided to allow easy integration of the toolbox into existing workflows. Previous efforts on GPU neural signal processing only focus on a few rudimentary algorithms, are not well-optimized and often do not provide a user-friendly programming interface to fit into existing workflows. There is a strong need for a comprehensive toolbox for massively parallel neural signal processing. A new toolbox for massively parallel neural signal processing has been created. It can offer significant speedup in processing signals from large-scale recordings up to thousands of channels. Copyright © 2018 Elsevier B.V. All rights reserved.

MontePython 3: Parameter inference code for cosmology

NASA Astrophysics Data System (ADS)

Brinckmann, Thejs; Lesgourgues, Julien; Audren, Benjamin; Benabed, Karim; Prunet, Simon

2018-05-01

MontePython 3 provides numerous ways to explore parameter space using Monte Carlo Markov Chain (MCMC) sampling, including Metropolis-Hastings, Nested Sampling, Cosmo Hammer, and a Fisher sampling method. This improved version of the Monte Python (ascl:1307.002) parameter inference code for cosmology offers new ingredients that improve the performance of Metropolis-Hastings sampling, speeding up convergence and offering significant time improvement in difficult runs. Additional likelihoods and plotting options are available, as are post-processing algorithms such as Importance Sampling and Adding Derived Parameter.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blystone, P.G.; Goltz, H.R.; Springer, J. Jr.

The reduction of volatile organic compound (VOC) emissions is a significant goal of the 1990 Clean Air Act. Industrial operations relating to surface preparation, surface coating and paint striping operations constitute one of the largest industrial sources of VOC emissions. This paper describes a new emission control system offered by Purus, Inc. which captures and recovers VOCs from paint stripping operations. The system is based on an on-site adsorption-desorption process which utilizes a specialized polymeric resin adsorbent. Adsorbent beds are regenerated through a computer controlled pressure-temperature swing process (PTSA). The adsorbent resin offers significant operational advantages over conventional activated carbonmore » adsorbents with respect to treating air laden with methyl ethyl ketone (MEK) vapors. Treatment of MEK with activated carbon can be problematic due to reactivity (degradation) and high heats of adsorption of ketones with carbon. The Purus process was successfully demonstrated at Tinker Air Force Base in or under the EPA`s Waste Reduction Evaluation at Federal Sites program. MEK emissions from a paint stripping booth vent were controlled at greater than 95% reduction levels. The recovered solvent was returned to depainting process and reused with no loss in paint stripping efficiency.« less

The impact of depression on social economic decision making.

PubMed

Harlé, Katia M; Allen, John J B; Sanfey, Alan G

2010-05-01

Although the role of emotion in social economic decision making has been increasingly recognized, the impact of mood disorders, such as depression, on such decisions has been surprisingly neglected. To address this gap, 15 depressed and 23 nondepressed individuals completed a well-known economic task, in which they had to accept or reject monetary offers from other players. Although depressed individuals reported a more negative emotional reaction to unfair offers, they accepted significantly more of these offers than did controls. A positive relationship was observed in the depressed group, but not in controls, between acceptance rates of unfair offers and resting cardiac vagal control, a physiological index of emotion regulation capacity. The discrepancy between depressed individuals' increased emotional reactions to unfair offers and their decisions to accept more of these offers contrasts with recent findings that negative mood in nondepressed individuals can lead to lower acceptance rates. This suggests distinct biasing processes in depression, which may be related to higher reliance on regulating negative emotion.

The Impact of Depression on Social Economic Decision-making

PubMed Central

Harlé, Katia M.; Allen, John J.B.; Sanfey, Alan G.

2010-01-01

Although the role of emotion in social economic decision-making has been increasingly recognized, the impact of mood disorders, such as depression, on such decisions has been surprisingly neglected. To address this gap, fifteen depressed and twenty-three nondepressed individuals completed a well-known economic task, in which they had to accept or reject monetary offers from other players. Although depressed individuals reported a more negative emotional reaction to unfair offers, they accepted significantly more of these offers than did controls. A positive relationship was observed in the depressed group, but not in controls, between acceptance rates of unfair offers and resting cardiac vagal control, a physiological index of emotion regulation capacity. The discrepancy between depressed individuals’ increased emotional reactions to unfair offers and their decisions to accept more of these offers contrasts with recent findings that negative mood in nondepressed individuals can lead to lower acceptance rates. This suggests distinct biasing processes in depression, which may be related to higher reliance on regulating negative emotion. PMID:20455617

Three-dimensional imaging technology offers promise in medicine.

PubMed

Karako, Kenji; Wu, Qiong; Gao, Jianjun

2014-04-01

Medical imaging plays an increasingly important role in the diagnosis and treatment of disease. Currently, medical equipment mainly has two-dimensional (2D) imaging systems. Although this conventional imaging largely satisfies clinical requirements, it cannot depict pathologic changes in 3 dimensions. The development of three-dimensional (3D) imaging technology has encouraged advances in medical imaging. Three-dimensional imaging technology offers doctors much more information on a pathology than 2D imaging, thus significantly improving diagnostic capability and the quality of treatment. Moreover, the combination of 3D imaging with augmented reality significantly improves surgical navigation process. The advantages of 3D imaging technology have made it an important component of technological progress in the field of medical imaging.

IN-SITU BIOREMEDIATION OF GROUND WATER AND GEOLOGICAL MATERIAL: A REVIEW OF TECHNOLOGIES

EPA Science Inventory

In situ bioremediation of subsurface environments involve the use of microorganisms to convert contaminants to less harmful products and sometimes offers significant potential advantages over other remediation technologies. n order for these biodegradative processes to occur, icr...

New Times, New Ways of Teaching and Learning: Perception of the EHEA and Pedagogical Discussion

ERIC Educational Resources Information Center

González Geraldo, José Luis; Ferrándiz Vindel, Isabel María; Bordallo Jaén, Ana María

2010-01-01

It is 2010, the established deadline of the European Higher Education Area (EHEA). The Bologna Process is an unstoppable reality. But we can not admit that this change, simply by being a significant change, must be for good. We can not also disregard the potential positive pedagogical reform the Bologna Process offers to us. Then, what is the…

Methodological considerations for studying social processes.

PubMed

Patterson, Barbara; Morin, Karen

2012-01-01

To discuss the nature of and considerations in the study of social processes. Social processes include the elements of time, change and human interaction and many phenomena of interest to nurse researchers. Despite the significance of social processes for nursing practice and the labelling in many studies of phenomena as processes, there seems to be an inability to describe processes fully. The paper includes a presentation of two methodological approaches for illuminating the dynamics of social processes: participant observation and prospective time-series designs. Strengths and limitations of the two paradigmatically different approaches are offered. The method an investigator chooses should be considered selectively and appropriately according to the nature of the problem, what is known about the phenomena to be studied, and the investigator's world view and theoretical perspective. The conceptualisation of process can also influence the methodological choice. Capturing a social process in its entirety with either a qualitative or quantitative approach can be a difficult task. The focus of this paper is an initiation and expansion of the dialogue about which methods provide the best insight into social processes. This knowledge may offer opportunities for nurse researchers to design and implement interventions for individuals as they progress through life events.

Rejection of Unfair Offers Can Be Driven by Negative Emotions, Evidence from Modified Ultimatum Games with Anonymity

PubMed Central

Ma, Ning; Li, Nan; He, Xiao-Song; Sun, De-Lin; Zhang, Xiaochu; Zhang, Da-Ren

2012-01-01

The rejection of unfair offers can be affected by both negative emotions (e.g. anger and moral disgust) and deliberate cognitive processing of behavioral consequences (e.g. concerns of maintaining social fairness and protecting personal reputation). However, whether negative emotions are sufficient to motivate this behavior is still controversial. With modified ultimatum games, a recent study (Yamagishi T, et al. (2009) Proc Natl Acad Sci USA 106∶11520–11523) found that people reject unfair offers even when this behavior increases inequity, and even when they could not communicate to the proposers. Yamagishi suggested that rejection of unfair offers could occurr without people’s concerning of maintaining social fairness, and could be driven by negative emotions. However, as anonymity was not sufficiently guaranteed in Yamagishi’s study, the rejection rates in their experiments may have been influenced by people’s concerns of protecting personal reputation (reputational concerns) in addition to negative emotions; thus, it was unclear whether the rejection was driven by negative emotions, or by reputational concerns, or both. In the present study, with specific methods to ensure anonymity, the effect of reputational concerns was successfully ruled out. We found that in a private situation in which rejection could not be driven by reputational concerns, the rejection rates of unfair offers were significantly larger than zero, and in public situations in which rejection rates could be influenced by both negative emotions and reputational concerns, rejection rates were significantly higher than that in the private situation. These results, together with Yamagishi’s findings, provided more complete evidence suggesting (a) that the rejection of unfair offers can be driven by negative emotions and (b) that deliberate cognitive processing of the consequences of the behavior can increase the rejection rate, which may benefit social cooperation. PMID:22761845

Downstream reactions and engineering in the microbially reconstituted pathway for Taxol.

PubMed

Jiang, Ming; Stephanopoulos, Gregory; Pfeifer, Blaine A

2012-05-01

Taxol (a trademarked product of Bristol-Myers Squibb) is a complex isoprenoid natural product which has displayed potent anticancer activity. Originally isolated from the Pacific yew tree (Taxus brevifolia), Taxol has been mass-produced through processes reliant on plant-derived biosynthesis. Recently, there have been alternative efforts to reconstitute the biosynthetic process through technically convenient microbial hosts, which offer unmatched growth kinetics and engineering potential. Such an approach is made challenging by the need to successfully introduce the significantly foreign enzymatic steps responsible for eventual biosynthesis. Doing so, however, offers the potential to engineer more efficient and economical production processes and the opportunity to design and produce tailored analog compounds with enhanced properties. This mini review will specifically focus on heterologous biosynthesis as it applies to Taxol with an emphasis on the challenges associated with introducing and reconstituting the downstream reaction steps needed for final bioactivity.

Reconfigurable Computing As an Enabling Technology for Single-Photon-Counting Laser Altimetry

NASA Technical Reports Server (NTRS)

Powell, Wesley; Hicks, Edward; Pinchinat, Maxime; Dabney, Philip; McGarry, Jan; Murray, Paul

2003-01-01

Single-photon-counting laser altimetry is a new measurement technique offering significant advantages in vertical resolution, reducing instrument size, mass, and power, and reducing laser complexity as compared to analog or threshold detection laser altimetry techniques. However, these improvements come at the cost of a dramatically increased requirement for onboard real-time data processing. Reconfigurable computing has been shown to offer considerable performance advantages in performing this processing. These advantages have been demonstrated on the Multi-KiloHertz Micro-Laser Altimeter (MMLA), an aircraft based single-photon-counting laser altimeter developed by NASA Goddard Space Flight Center with several potential spaceflight applications. This paper describes how reconfigurable computing technology was employed to perform MMLA data processing in real-time under realistic operating constraints, along with the results observed. This paper also expands on these prior results to identify concepts for using reconfigurable computing to enable spaceflight single-photon-counting laser altimeter instruments.

"That in your hands". A comprehensive process analysis of a significant event in psychotherapy.

PubMed

Elliott, R

1983-05-01

This article illustrates a new approach to the study of change processes in psychotherapy. The approach involves selecting significant change events and analyzing them according to the Comprehensive Process Model. In this model, client and therapist behaviors are analyzed for content, interpersonal action, style and response quality by using information derived from Interpersonal Process Recall, client and therapist objective process ratings and qualitative analyses. The event selected for analysis in this paper was rated by client and therapist as significantly helpful. The focal therapist response was a reflective-interpretive intervention in which the therapist collaboratively and evocatively expanded the client's implicit meanings. The event involved working through an earlier insight and realization of progress by the client. The event suggests an association between subjective "felt shifts" and public "process shifts" in client in-therapy behaviors. A model, consistent with Gendlin's experiential psychotherapy (1970), is offered to describe the change process which occurred in this event.

Development of manufacturing systems for nanocrystalline and ultra-fine grain materials employing indexing equal channel angular pressing

NASA Astrophysics Data System (ADS)

Hester, Michael Wayne

Nanotechnology offers significant opportunities in providing solutions to existing engineering problems as well as breakthroughs in new fields of science and technology. In order to fully realize benefits from such initiatives, nanomanufacturing methods must be developed to integrate enabling constructs into commercial mainstream. Even though significant advances have been made, widespread industrialization in many areas remains limited. Manufacturing methods, therefore, must continually be developed to bridge gaps between nanoscience discovery and commercialization. A promising technology for integration of top-down nanomanufacturing yet to receive full industrialization is equal channel angular pressing, a process transforming metallic materials into nanostructured or ultra-fine grained materials with significantly improved performance characteristics. To bridge the gap between process potential and actual manufacturing output, a prototype top-down nanomanufacturing system identified as indexing equal channel angular pressing (IX-ECAP) was developed. The unit was designed to capitalize on opportunities of transforming spent or scrap engineering elements into key engineering commodities. A manufacturing system was constructed to impose severe plastic deformation via simple shear in an equal channel angular pressing die on 1100 and 4043 aluminum welding rods. 1/4 fraction factorial split-plot experiments assessed significance of five predictors on the response, microhardness, for the 4043 alloy. Predictor variables included temperature, number of passes, pressing speed, back pressure, and vibration. Main effects were studied employing a resolution III design. Multiple linear regression was used for model development. Initial studies were performed using continuous processing followed by contingency designs involving discrete variable length work pieces. IX-ECAP offered a viable solution in severe plastic deformation processing. Discrete variable length work piece pressing proved very successful. With three passes through the system, 4043 processed material experienced an 88.88% increase in microhardness, 203.4% increase in converted yield strength, and a 98.5% reduction in theoretical final grain size to 103 nanometers using the Hall-Petch relation. The process factor, number of passes, was statistically significant at the 95% confidence level; whereas, temperature was significant at the 90% confidence level. Limitations of system components precluded completion of studies involving continuous pressing. Proposed system redesigns, however, will ensure mainstream commercialization of continuous length work piece processing.

Helping Children in Times of Need: Grief, Loss, Separation & Divorce. A Handbook for Parents Assisting Children through Grief and Loss.

ERIC Educational Resources Information Center

Parker, Judith A.

Although a world of uncertainty and continual change is difficult to explain to children, by exploring and discussing the process of grief, parents can begin to understand the significance and necessity of the grief process and help their children to cope with difficult events. This booklet offers parents advice on how to talk with children about…

Developing a Model for ePortfolio Design: A Studio Approach

ERIC Educational Resources Information Center

Carpenter, Russell; Apostel, Shawn; Hyndman, June Overton

2012-01-01

After developing and testing a model for integrative collaboration at Eastern Kentucky University's Noel Studio for Academic Creativity, we offer results that highlight the potential for peer review to significantly and positively impact the ePortfolio design process for students. The results of this classroom/studio collaboration suggest that…

Some Reflections on the Teaching of Mathematical Modeling

ERIC Educational Resources Information Center

Warwick, Jon

2007-01-01

This paper offers some reflections on the difficulties of teaching mathematical modeling to students taking higher education courses in which modeling plays a significant role. In the author's experience, other aspects of the model development process often cause problems rather than the use of mathematics. Since these other aspects involve…

Future Directions in Etiologic, Prevention, and Treatment Research for Eating Disorders

ERIC Educational Resources Information Center

Stice, Eric; South, Kelsey; Shaw, Heather

2012-01-01

Significant advances have occurred regarding the understanding of etiologic processes that give rise to eating disorders and the design and evaluation of efficacious prevention programs and treatment interventions. Herein we offer suggestions regarding potentially fruitful directions for future research in these areas. We suggest it would be…

77 FR 43575 - Intent To Prepare a Draft Environmental Impact Statement/Environmental Impact Report for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-25

..., identifying significant environmental issues in the DEIS/EIR, providing useful information such as published and unpublished data, and knowledge of relevant issues and recommending mitigation measures to offset... the scoping process. c. Individuals and agencies may offer information or data relevant to the...

Network model of project "Lean Production"

NASA Astrophysics Data System (ADS)

Khisamova, E. D.

2018-05-01

Economical production implies primarily new approaches to culture of management and organization of production and offers a set of tools and techniques that allows reducing losses significantly and making the process cheaper and faster. Economical production tools are simple solutions that allow one to see opportunities for improvement of all aspects of the business, to reduce losses significantly, to constantly improve the whole spectrum of business processes, to increase significantly the transparency and manageability of the organization, to take advantage of the potential of each employee of the company, to increase competitiveness, and to obtain significant economic benefits without making large financial expenditures. Each of economical production tools solves a specific part of the problems, and only application of their combination will allow one to solve the problem or minimize it to acceptable values. The research of the governance process project "Lean Production" permitted studying the methods and tools of lean production and developing measures for their improvement.

Shelf Life of PMR Polyimide Monomer Solutions and Prepregs Extended

NASA Technical Reports Server (NTRS)

Alston, William B.; Scheiman, Daniel A.

2000-01-01

PMR (Polymerization of Monomeric Reactants) technology was developed in the mid-1970's at the NASA Glenn Research Center at Lewis Field for fabricating high-temperature stable polyimide composites. This technology allowed a solution of polyimide monomers or prepreg (a fiber, such as glass or graphite, impregnated with PMR polyimide monomers) to be thermally cured without the release of volatiles that cause the formation of voids unlike the non-PMR technology used for polyimide condensation type resins. The initial PMR resin introduced as PMR 15 is still commercially available and is used worldwide by aerospace industries as the state-of-the-art resin for high-temperature polyimide composite applications. PMR 15 offers easy composite processing, excellent composite mechanical property retention, a long lifetime at use temperatures of 500 to 550 F, and relatively low cost. Later, second-generation PMR resin versions, such as PMR II 50 and VCAP 75, offer improvements in the upper-use temperature (to 700 F) and in the useful life at temperature without major compromises in processing and property retention but with significant increases in resin cost. Newer versions of nontoxic (non-methylene dianiline) PMR resins, such as BAX PMR 15, offer similar advantages as originally found for PMR 15 but also with significant increases in resin cost. Thus, the current scope of the entire PMR technology available meets a wide range of aeronautical requirements for polymer composite applications.

Behavioral and neuronal determinants of negative reciprocity in the ultimatum game

PubMed Central

Hildebrandt, Andrea; Wilhelm, Oliver; Sommer, Werner

2016-01-01

The rejection of unfair offers in the ultimatum game (UG) indicates negative reciprocity. The model of strong reciprocity claims that negative reciprocity reflects prosociality because the rejecting individual is sacrificing resources in order to punish unfair behavior. However, a recent study found that the rejection rate of unfair offers is linked to assertiveness (status defense model). To pursue the question what drives negative reciprocity, the present study investigated individual differences in the rejection of unfair offers along with their behavioral and neuronal determinants. We measured fairness preferences and event-related potentials (ERP) in 200 healthy participants playing a computerized version of the UG with pictures of unfair and fair proposers. Structural equation modeling (SEM) on the behavioral data corroborated both the strong reciprocity and the status defense models of human cooperation: Not only more prosocial but also more assertive individuals were more likely to show negative reciprocity by rejecting unfair offers. Experimental ERP results confirmed the feedback negativity (FN) as a neural signature of fairness processing. Multilevel SEM of brain–behavior relationships revealed that negative reciprocity was significantly associated with individual differences in FN amplitudes in response to proposers. Our results confirm stable individual differences in fairness processing at the behavioral and neuronal level. PMID:27261490

Laurentide Ice Sheet Meltwater Geochemistry During the MIS 3 Warm Phase from Single-Shell Trace Element and Isotope Measurements

NASA Astrophysics Data System (ADS)

Branson, O.; Vetter, L.; Fehrenbacher, J. S.; Spero, H. J.

2016-12-01

The geochemical variability between individual foraminifera within single core intervals records both palaeo-oecanographic conditions and ecology. Within the biological context of foraminiferal species, this population variability may be interpreted to provide unparalleled paleoenvironmental information. For example, coupled trace element and stable isotope analyses of single O. universa offer a powerful tool for reconstructing the δ18O of Laurentide Ice Sheet (LIS) meltwater, by calculating the intercept between temperature-corrected δ18O water and Ba/Ca salinity estimates (Vetter et al., in review). This offers valuable insights into the dynamics of ice sheet melting at the end of the last glacial maximum. Here we apply similar coupled single-shell laser ablation (LA-ICP-MS) and isotope ratio mass spectrometry (IRMS) techniques to explore the δ18O of Laurentide meltwater during H4 and bracketing intervals. The application of these methods to down-core samples requires the development of robust LA-ICP-MS data processing techniques to identify primary signals within Ba contaminated samples, and careful consideration of palaeo Ba/Ca-salinity relationships. Our analyses offer a significant advance in systematic LA-ICP-MS data processing methods, offer constraints on the variability of riverine Ba fluxes, and ultimately provide δ18O estimates of LIS meltwater during H4.

Materials

NASA Technical Reports Server (NTRS)

Glaessgen, Edward H.; Schoeppner, Gregory A.

2006-01-01

NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

Vapor compression distiller and membrane technology for water revitalization

NASA Technical Reports Server (NTRS)

Ashida, A.; Mitani, K.; Ebara, K.; Kurokawa, H.; Sawada, I.; Kashiwagi, H.; Tsuji, T.; Hayashi, S.; Otsubo, K.; Nitta, K.

1987-01-01

Water revitalization for a space station can consist of membrane filtration processes and a distillation process. Water recycling equipment using membrane filtration processes was manufactured for ground testing. It was assembled using commercially available components. Two systems for the distillation are studied: one is absorption type thermopervaporation cell and the other is a vapor compression distiller. Absorption type thermopervaporation, able to easily produce condensed water under zero gravity, was investigated experimentally and through simulated calculation. The vapor compression distiller was studied experimentally and it offers significant energy savings for evaporation of water.

Vapor compression distiller and membrane technology for water revitalization.

PubMed

Ashida, A; Mitani, K; Ebara, K; Kurokawa, H; Sawada, I; Kashiwagi, H; Tsuji, T; Hayashi, S; Otsubo, K; Nitta, K

1987-01-01

Water revitalization for a space station can consist of membrane filtration processes and a distillation process. Water recycling equipment using membrane filtration processes was manufactured for ground testing. It was assembled using commercially available components. Two systems for the distillation are studied; one is an absorption type thermopervaporation cell and the other is a vapor compression distiller. Absorption type thermopervaporation able to easily produce condensed water under zero gravity was investigated experimentally and through simulated calculation. The vapor compression distiller was studied experimentally and it offers significant energy savings for evaporation of water.

Beauty matters: social preferences in a three-person ultimatum game.

PubMed

Ma, Qingguo; Hu, Yue

2015-01-01

Preference for beauty is human nature, as previous behavior studies have supported the notion of "beauty premium" in which attractive people were more easily to get promoted and receive higher salaries. In the present study, 29 males were recruited to participate in a three-person ultimatum game (UG) including a proposer, a responder and a powerless third player. Each subject, playing as the responder, had to decide whether to accept an offer from the allocator both for himself and a female third person. We aimed to elucidate how the facial attractiveness of the female subject affected the male subjects' fairness and decision-making in social exchanges. Frontal feedback-related negativity (FRN) in response to four offers in an attractive-face condition revealed no significant differences between offers; however, when the companion was an unattractive female, an "unfair/fair" offer, which assigned a lower share to the responder and a fair share to the third player, elicited the largest FRN. Furthermore, when the third player was offered the smallest amount ("fair/unfair" offer), a larger FRN was generated in an attractive-face condition than unattractive-face condition. In the "unfair/fair" offer condition in which subjects received a smaller allocation than the third person, the beauty of their female counterparts attenuated subjects' aversion to inequality, resulting in a less negative FRN in the frontal region and an increased acceptance ratio. However, the influence of the third player's facial attractiveness only affected the early evaluation stage: late P300 was found to be immune to the "beauty premium". Under the two face conditions, P300 was smallest following an "unfair/fair" offer, whereas the amplitudes in the other three offer conditions exhibited no significant differences. In addition, the differentiated neural features of processing facial attractiveness were also determined and indexed by four event-related potentials (ERP) components: N170, frontal N1, N2 and late positive potentials (LPPs).

Beauty Matters: Social Preferences in a Three-Person Ultimatum Game

PubMed Central

2015-01-01

Preference for beauty is human nature, as previous behavior studies have supported the notion of “beauty premium” in which attractive people were more easily to get promoted and receive higher salaries. In the present study, 29 males were recruited to participate in a three-person ultimatum game (UG) including a proposer, a responder and a powerless third player. Each subject, playing as the responder, had to decide whether to accept an offer from the allocator both for himself and a female third person. We aimed to elucidate how the facial attractiveness of the female subject affected the male subjects’ fairness and decision-making in social exchanges. Frontal feedback-related negativity (FRN) in response to four offers in an attractive-face condition revealed no significant differences between offers; however, when the companion was an unattractive female, an “unfair/fair” offer, which assigned a lower share to the responder and a fair share to the third player, elicited the largest FRN. Furthermore, when the third player was offered the smallest amount (“fair/unfair” offer), a larger FRN was generated in an attractive-face condition than unattractive-face condition. In the “unfair/fair” offer condition in which subjects received a smaller allocation than the third person, the beauty of their female counterparts attenuated subjects’ aversion to inequality, resulting in a less negative FRN in the frontal region and an increased acceptance ratio. However, the influence of the third player’s facial attractiveness only affected the early evaluation stage: late P300 was found to be immune to the “beauty premium”. Under the two face conditions, P300 was smallest following an “unfair/fair” offer, whereas the amplitudes in the other three offer conditions exhibited no significant differences. In addition, the differentiated neural features of processing facial attractiveness were also determined and indexed by four event-related potentials (ERP) components: N170, frontal N1, N2 and late positive potentials (LPPs). PMID:25951138

The Vocational Significance of Black Identity: Cultural Formulation Approach to Career Assessment and Career Counseling

ERIC Educational Resources Information Center

Byars-Winston, Angela

2010-01-01

Scholarship is emerging on intervention models that purposefully attend to cultural variables throughout the career assessment and career counseling process. One heuristic model that offers promise to advance culturally relevant vocational practice with African Americans is the Outline for Cultural Formulation (CF). This article explicates the…

Putting the Deep Biosphere and Gas Hydrates on the Map

ERIC Educational Resources Information Center

Sikorski, Janelle J.; Briggs, Brandon R.

2016-01-01

Microbial processes in the deep biosphere affect marine sediments, such as the formation of gas hydrate deposits. Gas hydrate deposits offer a large source of natural gas with the potential to augment energy reserves and affect climate and seafloor stability. Despite the significant interdependence between life and geology in the ocean, coverage…

Supporting Young Children's Vocabulary Growth: The Challenges, the Benefits, and Evidence-Based Strategies

ERIC Educational Resources Information Center

Jalongo, Mary Renck; Sobolak, Michelle J.

2011-01-01

The complexity of words makes vocabulary development a multi-faceted process that presents challenges to early childhood educators, offers benefits to young learners, and must be supported through evidence-based strategies. All students, regardless of socio-economic status or background, need to make significant gains in receptive and expressive…

The Significance of Visual Information Processing in Reading: Insights from Hemianopic Dyslexia

ERIC Educational Resources Information Center

Schuett, Susanne; Heywood, Charles A.; Kentridge, Robert W.; Zihl, Josef

2008-01-01

We present the first comprehensive review of research into hemianopic dyslexia since Mauthner's original description of 1881. We offer an explanation of the reading impairment in patients with unilateral homonymous visual field disorders and clarify its functional and anatomical bases. The major focus of our review is on visual information…

What Affect Student Cognitive Style in the Development of Hypermedia Learning System?

ERIC Educational Resources Information Center

Lee, Catherine Hui Min; Cheng, Yuk Wing; Rai, Shri; Depickere, Arnold

2005-01-01

Recent developments in learning technology such as hypermedia is becoming widespread and offer significant contribution to improve the delivery of learning and teaching materials. A key factor in the development of hypermedia learning system is cognitive style (CS) as it relates to users' information processing habits, representing individual…

Librarian contributions to clinical practice guidelines.

PubMed

Cruse, Peggy; Protzko, Shandra

2014-01-01

Librarians have become more involved in developing high quality systematic reviews. Evidence-based practice guidelines are an extension of systematic reviews and offer another significant area for librarian involvement. This column highlights opportunities and challenges for the librarian working on guideline panels and provides practical considerations for meaningful contributions to the guideline creation process.

Interpretation of Oral Fluid Tests for Drugs of Abuse

PubMed Central

CONE, EDWARD J.; HUESTIS, MARILYN A.

2009-01-01

Oral fluid testing for drugs of abuse offers significant advantages over urine as a test matrix. Collection can be performed under direct observation with reduced risk of adulteration and substitution. Drugs generally appear in oral fluid by passive diffusion from blood, but also may be deposited in the oral cavity during oral, smoked, and intranasal administration. Drug metabolites also can be detected in oral fluid. Unlike urine testing, there may be a close correspondence between drug and metabolite concentrations in oral fluid and in blood. Interpretation of oral fluid results for drugs of abuse should be an iterative process whereby one considers the test results in the context of program requirements and a broad scientific knowledge of the many factors involved in determining test outcome. This review delineates many of the chemical and metabolic processes involved in the disposition of drugs and metabolites in oral fluid that are important to the appropriate interpretation of oral fluid tests. Chemical, metabolic, kinetic, and analytic parameters are summarized for selected drugs of abuse, and general guidelines are offered for understanding the significance of oral fluid tests. PMID:17332074

An Empirical Study of Combining Communicating Processes in a Parallel Discrete Event Simulation

DTIC Science & Technology

1990-12-01

dynamics of the cost/performance criteria which typically made up computer resource acquisition decisions . offering a broad range of tradeoffs in the way... prcesses has a significant impact on simulation performance. It is the hypothesis of this 3-4 SYSTEM DECOMPOSITION PHYSICAL SYSTEM 1: N PHYSICAL PROCESS 1...EMPTY)) next-event = pop(next-event-queue); lp-clock = next-event - time; Simulate next event departure- consume event-enqueue new event end while; If no

Computerized Production Process Planning. Volume 2. Benefit Analysis.

DTIC Science & Technology

1976-11-01

advantage , in the long term, Systems 2 and 3 will return greater economic benefits . Plots of the cumulative present value of the cash flow by year are...is economically viable for large parts manufac- turers and does offer significant advantages over Systems I and 2 in terms of intangible benefits ...AD-RI51 996 COMPUTERIZED PRODUCTION PROCESS PLANNING VOLUME 2 i/1.. BENEFIT ANRLYSIS(U) IIT RESEARCH INST CHICRGO IL SH H HU ET AL. NOV 76 DAAHNi-76

Probing the chemistry of nickel/metal hydride battery cells using electrochemical impedance spectroscopy

NASA Technical Reports Server (NTRS)

Isaac, Bryan J.

1994-01-01

Electrochemical Impedance Spectroscopy (EIS) is a valuable tool for investigating the chemical and physical processes occurring at electrode surfaces. It offers information about electron transfer at interfaces, kinetics of reactions, and diffusion characteristics of the bulk phase between the electrodes. For battery cells, this technique offers another advantage in that it can be done without taking the battery apart. This non-destructive analysis technique can thus be used to gain a better understanding of the processes occurring within a battery cell. This also raises the possibility of improvements in battery design and identification or prediction of battery characteristics useful in industry and aerospace applications. EIS as a technique is powerful and capable of yielding significant information about the cell, but it also requires that the many parameters under investigation can be resolved. This implies an understanding of the processes occurring in a battery cell. Many battery types were surveyed in this work, but the main emphasis was on nickel/metal hydride batteries.

Turboexpander plant designs can provide high ethane recovery without inlet CO/sub 2/ removal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkinson, J.D.; Hudson, H.M.

1982-05-03

New turboexpander plant designs can process natural gas streams containing moderate amounts of carbon dioxide (CO/sub 2/) for high ethane recovery without inlet gas treating. The designs will handle a wide range of inlet ethane-plus fractions. They also offer reduced horsepower requirements compared to other processes. CO/sub 2/ is a typical component of most natural gas streams. In many cases, processing of these gas streams in a turboexpander plant for high ethane recovery requires pre-treatment of the gas for CO/sub 2/ removal. This is required to avoid the formation of solid CO/sub 2/ (freezing) in the cold sections of themore » process and/or to meet necessary residue gas and liquid product CO/sub 2/ specifications. Depending on the quantities involved, the CO/sub 2/ removal systems is generally a significant portion of both the installed cost and operating cost for the ethane recovery facility. Therefore, turboexpander plant designs that are capable of handling increased quantities of CO/sub 2/ in the feed gas without freezing can offer the gas processor substantial economic benefits.« less

Out-of-Autoclave Cure Composites

NASA Technical Reports Server (NTRS)

Hayes, Brian S.

2015-01-01

As the size of aerospace composite parts exceeds that of even the largest autoclaves, the development of new out-of-autoclave processes and materials is necessary to ensure quality and performance. Many out-of-autoclave prepreg systems can produce high-quality composites initially; however, due to long layup times, the resin advancement commonly causes high void content and variations in fiber volume. Applied Poleramic, Inc. (API), developed an aerospace-grade benzoxazine matrix composite prepreg material that offers more than a year out-time at ambient conditions and provides exceptionally low void content when out-of-autoclave cured. When compared with aerospace epoxy prepreg systems, API's innovation offers significant improvements in terms of out-time at ambient temperature and the corresponding tack retention. The carbon fiber composites developed with the optimized matrix technology have significantly better mechanical performance in terms of hot-wet retention and compression when compared with aerospace epoxy matrices. These composites also offer an excellent overall balance of properties. This matrix system imparts very low cure shrinkage, low coefficient of thermal expansion, and low density when compared with most aerospace epoxy prepreg materials.

Membrane separation systems---A research and development needs assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, R.W.; Cussler, E.L.; Eykamp, W.

1990-04-01

Industrial separation processes consume a significant portion of the energy used in the United States. A 1986 survey by the Office of Industrial Programs estimated that about 4.2 quads of energy are expended annually on distillation, drying and evaporation operations. This survey also concluded that over 0.8 quads of energy could be saved in the chemical, petroleum and food industries alone if these industries adopted membrane separation systems more widely. Membrane separation systems offer significant advantages over existing separation processes. In addition to consuming less energy than conventional processes, membrane systems are compact and modular, enabling easy retrofit to existingmore » industrial processes. The present study was commissioned by the Department of Energy, Office of Program Analysis, to identify and prioritize membrane research needs in light of DOE's mission. Each report will be individually cataloged.« less

Earth Observation Services Weather Imaging

NASA Technical Reports Server (NTRS)

1992-01-01

Microprocessor-based systems for processing satellite data offer mariners real-time images of weather systems, day and night, of large areas or allow them to zoom in on a few square miles. Systems West markets these commercial image processing systems, which have significantly decreased the cost of satellite weather stations. The company was assisted by the EOCAP program, which provides government co-funding to encourage private investment in, and to broaden the use of, NASA-developed technology for analyzing information about Earth and ocean resources.

Low cost damage tolerant composite fabrication

NASA Technical Reports Server (NTRS)

Palmer, R. J.; Freeman, W. T.

1988-01-01

The resin transfer molding (RTM) process applied to composite aircraft parts offers the potential for using low cost resin systems with dry graphite fabrics that can be significantly less expensive than prepreg tape fabricated components. Stitched graphite fabric composites have demonstrated compression after impact failure performance that equals or exceeds that of thermoplastic or tough thermoset matrix composites. This paper reviews methods developed to fabricate complex shape composite parts using stitched graphite fabrics to increase damage tolerance with RTM processes to reduce fabrication cost.

Chemistry, Adhesive and Composite Properties of Low Molecular Weight Phenylethynyl Terminated Oligomers

NASA Technical Reports Server (NTRS)

Connell, John W.

2004-01-01

PETI-5 (1250 and 2500 g/mole) were prepared and characterized. Neat resin, adhesive and composite properties were determined and compared with those of PETI-5 (5000 g/mole). Relative to PETI-5 (5000 g/mole), PETI-5 (2500 g/mole) exhibited improved processability and equivalency in the adhesive and composite properties measured thus far. This resin, in both adhesive film and prepreg form, has the potential to offer significant improvements in the processing of complex structural composite parts.

The Uses of Qualitative Research: Powerful Methods to Inform Evidence-Based Practice in Education

ERIC Educational Resources Information Center

Kozleski, Elizabeth B.

2017-01-01

This article offers a rationale for the contributions of qualitative research to evidence-based practice in special education. In it, I make the argument that qualitative research encompasses the ability to study significant problems of practice, engage with practitioners in the conduct of research studies, learn and change processes during a…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jain, Abhilasha, E-mail: abhilasha.vnit@gmail.com; Kumar, Ashwini; Peshwe, D. R.

Rare earth activated hybrid phosphors have made significant progress in terms of better light output, color properties and potential for long life. All these features coupled with low cost production and reduced maintenance have offered phosphor converted LEDs for diverse optoelectronic applications including signal lighting in advanced aviation. The present paper explores the effect of various processing parameters on luminescent hybrid phosphors fabricated through combustion synthesis.

Rounding the Regression

ERIC Educational Resources Information Center

Marland, Eric; Bossé, Michael J.; Rhoads, Gregory

2018-01-01

Rounding is a necessary step in many mathematical processes. We are taught early in our education about significant figures and how to properly round a number. So when we are given a data set and asked to find a regression line, we are inclined to offer the line with rounded coefficients to reflect our model. However, the effects are not as…

Altered economic decision-making in abstinent heroin addicts: Evidence from the ultimatum game.

PubMed

Hou, Yu; Zhao, Liyan; Yao, Qi; Ding, Lixiang

2016-08-03

The development and persistence of drug addiction has been suggested to involve decision-making deficits. The Ultimatum Game is a widely used economic decision-making paradigm that illustrates the tension between financial self-interest and fairness motives. The behavior of responders in the Ultimatum Game has been associated with emotional reactions and cognitive control abilities, both of which are dysregulated in drug addicts. In this study, we investigated whether this economic decision-making process that involves considerations of social norms is affected by heroin addiction. Heroin addicts (n=17) and demographically matched healthy control subjects (n=18) were recruited to play the part of responders in the Ultimatum Game, during which they decided to accept or reject the monetary offers proposed by strangers. The offers were manipulated by varying the stake sizes and fairness scales. The rejection rates of all of the offer categories, response times, fairness judgments, and impulsivity were compared between heroin addicts and healthy controls. Compared with healthy subjects, the rejection rates of most unfair offers in the Ultimatum Game were significantly higher under low-offer-size conditions among heroin addicts. In contrast, the most unfair offers were more likely to be accepted by heroin addicts in the high-offer-size condition than by healthy subjects. The ratings of unfairness were equal in both conditions although the rejection rates were different. Heroin addicts had higher scores on BIS attentional/cognitive impulsivity and non-planning impulsivity, but not in motor impulsivity. Rejection rates to most unfair offers under low-offer-size conditions significantly correlated with score on BIS non-planning impulsivity and total score of impulsivity. Heroin addicts differentially responded under different stake-level conditions in the Ultimatum Game, with emotional impulses in low-offer-size conditions and selfish motives in the face of high monetary reward. These findings indicate that Ultimatum Game may be associated with heroin addiction and provide a productive new target for enhancing treatment for heroin addiction. Copyright © 2016. Published by Elsevier Ireland Ltd.

Deep anisotropic ICP plasma etching designed for high-volume MEMS manufacturing

NASA Astrophysics Data System (ADS)

Yu, Keven; Feldbaum, Michael; Pandhumsoporn, Tam; Gadgil, Prashant

1999-08-01

ICP plasma etching is gaining widespread acceptance as an enabling micromachining technology for advanced MEMS fabrication. Whereas this technology has shown a capability of delivering multiple novel applications for R and D, its acceptance by industry for high volume production has been limited. This acceptance into production will only occur when the plasma etching equipment with this technology offers the device performance, throughput, reliability, and uptime criteria required by a production facility. The design of the plasma etcher using this technology and the process capability it consequently delivers, has significant implications in making this a reality. Alcatel has been supplying such a technology to this MEMS industry for over 5 years and in the interim has evolved its product and process to make this technology production worthy. Alcatel's next generation etcher, the Alcatel 601E, offers multiple advantages to MEMS manufacturers in realizing their production goals.

Domestic wastewater treatment as a net energy producer--can this be achieved?

PubMed

McCarty, Perry L; Bae, Jaeho; Kim, Jeonghwan

2011-09-01

In seeking greater sustainability in water resources management, wastewater is now being considered more as a resource than as a waste-a resource for water, for plant nutrients, and for energy. Energy, the primary focus of this article, can be obtained from wastewater's organic as well as from its thermal content. Also, using wastewater's nitrogen and P nutrients for plant fertilization, rather than wasting them, helps offset the high energy cost of producing synthetic fertilizers. Microbial fuel cells offer potential for direct biological conversion of wastewater's organic materials into electricity, although significant improvements are needed for this process to be competitive with anaerobic biological conversion of wastewater organics into biogas, a renewable fuel used in electricity generation. Newer membrane processes coupled with complete anaerobic treatment of wastewater offer the potential for wastewater treatment to become a net generator of energy, rather than the large energy consumer that it is today.

Paramyxovirus Glycoproteins and the Membrane Fusion Process.

PubMed

Aguilar, Hector C; Henderson, Bryce A; Zamora, J Lizbeth; Johnston, Gunner P

2016-09-01

The family Paramyxoviridae includes many viruses that significantly affect human and animal health. An essential step in the paramyxovirus life cycle is viral entry into host cells, mediated by virus-cell membrane fusion. Upon viral entry, infection results in expression of the paramyxoviral glycoproteins on the infected cell surface. This can lead to cell-cell fusion (syncytia formation), often linked to pathogenesis. Thus membrane fusion is essential for both viral entry and cell-cell fusion and an attractive target for therapeutic development. While there are important differences between viral-cell and cell-cell membrane fusion, many aspects are conserved. The paramyxoviruses generally utilize two envelope glycoproteins to orchestrate membrane fusion. Here, we discuss the roles of these glycoproteins in distinct steps of the membrane fusion process. These findings can offer insights into evolutionary relationships among Paramyxoviridae genera and offer future targets for prophylactic and therapeutic development.

Paramyxovirus Glycoproteins and the Membrane Fusion Process

PubMed Central

Aguilar, Hector C.; Henderson, Bryce A.; Zamora, J. Lizbeth; Johnston, Gunner P.

2016-01-01

The family Paramyxoviridae includes many viruses that significantly affect human and animal health. An essential step in the paramyxovirus life cycle is viral entry into host cells, mediated by virus-cell membrane fusion. Upon viral entry, infection results in expression of the paramyxoviral glycoproteins on the infected cell surface. This can lead to cell-cell fusion (syncytia formation), often linked to pathogenesis. Thus membrane fusion is essential for both viral entry and cell-cell fusion and an attractive target for therapeutic development. While there are important differences between viral-cell and cell-cell membrane fusion, many aspects are conserved. The paramyxoviruses generally utilize two envelope glycoproteins to orchestrate membrane fusion. Here, we discuss the roles of these glycoproteins in distinct steps of the membrane fusion process. These findings can offer insights into evolutionary relationships among Paramyxoviridae genera and offer future targets for prophylactic and therapeutic development. PMID:28138419

Numerical simulation of complex part manufactured by selective laser melting process

NASA Astrophysics Data System (ADS)

Van Belle, Laurent

2017-10-01

Selective Laser Melting (SLM) process belonging to the family of the Additive Manufacturing (AM) technologies, enable to build parts layer by layer, from metallic powder and a CAD model. Physical phenomena that occur in the process have the same issues as conventional welding. Thermal gradients generate significant residual stresses and distortions in the parts. Moreover, the large and complex parts to manufacturing, accentuate the undesirable effects. Therefore, it is essential for manufacturers to offer a better understanding of the process and to ensure production reliability of parts with high added value. This paper focuses on the simulation of manufacturing turbine by SLM process in order to calculate residual stresses and distortions. Numerical results will be presented.

Virtual patients: practical advice for clinical authors using Labyrinth.

PubMed

Begg, Michael

2010-09-01

Labyrinth is a tool originally developed in the University of Edinburgh's Learning Technology Section for authoring and delivering branching case scenarios. The scenarios can incorporate game-informed elements such as scoring, randomising, avatars and counters. Labyrinth has grown more popular internationally since a version of the build was made available on the open source network Source Forge. This paper offers help and advice for clinical educators interested in creating cases. Labyrinth is increasingly recognised as a tool offering great potential for delivering cases that promote rich, situated learning opportunities for learners. There are, however, significant challenges to generating such cases, not least of which is the challenge for potential authors in approaching the process of constructing narrative-rich, context-sensitive cases in an unfamiliar authoring environment. This paper offers a brief overview of the principles informing Labyrinth cases (game-informed learning), and offers some practical advice to better prepare educators with little or no prior experience. Labyrinth has continued to grow and develop, from its roots as a research and development environment to one that is optimised for use by non-technical clinical educators. The process becomes increasingly iterative and better informed as the teaching community push the software further. The positive implications of providing practical advice and concept insight to new case authors is that it ideally leads to a broader base of users who will inform future iterations of the software. © Blackwell Publishing Ltd 2010.

Behavioral and neuronal determinants of negative reciprocity in the ultimatum game.

PubMed

Kaltwasser, Laura; Hildebrandt, Andrea; Wilhelm, Oliver; Sommer, Werner

2016-10-01

The rejection of unfair offers in the ultimatum game (UG) indicates negative reciprocity. The model of strong reciprocity claims that negative reciprocity reflects prosociality because the rejecting individual is sacrificing resources in order to punish unfair behavior. However, a recent study found that the rejection rate of unfair offers is linked to assertiveness (status defense model). To pursue the question what drives negative reciprocity, the present study investigated individual differences in the rejection of unfair offers along with their behavioral and neuronal determinants. We measured fairness preferences and event-related potentials (ERP) in 200 healthy participants playing a computerized version of the UG with pictures of unfair and fair proposers. Structural equation modeling (SEM) on the behavioral data corroborated both the strong reciprocity and the status defense models of human cooperation: Not only more prosocial but also more assertive individuals were more likely to show negative reciprocity by rejecting unfair offers. Experimental ERP results confirmed the feedback negativity (FN) as a neural signature of fairness processing. Multilevel SEM of brain-behavior relationships revealed that negative reciprocity was significantly associated with individual differences in FN amplitudes in response to proposers. Our results confirm stable individual differences in fairness processing at the behavioral and neuronal level. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

44 CFR 79.7 - Offers and appeals under the SRL program.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., and shall continue throughout the process. After FEMA awards the project grant, the subgrantee shall...), the responsibilities of and benefits to the property owner, a summary of the consultation process... the market value of the property, the basis for the purchase offer, and the final offer amount. The...

The potential of space exploration for education

NASA Technical Reports Server (NTRS)

Shair, Fredrick H.

1993-01-01

Space exploration and observations from space offer unique opportunities with respect to education. Recent technical advances have significantly increased the width and sensitivity of the electromagnetic spectrum window through which we are able to 'see' the universe. Observations from space have forced a realization that the earth is a beautiful, complex, and interconnected system. Space astronomy and the remote sensing of objects throughout our solar system have the potential of providing unique educational opportunities. Modern technologies have significantly reduced the cost of collecting, transmitting and processing data. Consequently, we are entering an age where it is possible to open up the process of discovery to almost everyone - and especially to young people throughout the world.

DICOMGrid: a middleware to integrate PACS and EELA-2 grid infrastructure

NASA Astrophysics Data System (ADS)

Moreno, Ramon A.; de Sá Rebelo, Marina; Gutierrez, Marco A.

2010-03-01

Medical images provide lots of information for physicians, but the huge amount of data produced by medical image equipments in a modern Health Institution is not completely explored in its full potential yet. Nowadays medical images are used in hospitals mostly as part of routine activities while its intrinsic value for research is underestimated. Medical images can be used for the development of new visualization techniques, new algorithms for patient care and new image processing techniques. These research areas usually require the use of huge volumes of data to obtain significant results, along with enormous computing capabilities. Such qualities are characteristics of grid computing systems such as EELA-2 infrastructure. The grid technologies allow the sharing of data in large scale in a safe and integrated environment and offer high computing capabilities. In this paper we describe the DicomGrid to store and retrieve medical images, properly anonymized, that can be used by researchers to test new processing techniques, using the computational power offered by grid technology. A prototype of the DicomGrid is under evaluation and permits the submission of jobs into the EELA-2 grid infrastructure while offering a simple interface that requires minimal understanding of the grid operation.

Global Precipitation Measurement. Report 2; Benefits of Partnering with GPM Mission

NASA Technical Reports Server (NTRS)

Stocker, Erich F.; Smith, Eric A. (Editor); Adams, W. James (Editor); Starr, David OC. (Technical Monitor)

2002-01-01

An important goal of the Global Precipitation Measurement (GPM) mission is to maximize participation by non-NASA partners both domestic and international. A consequence of this objective is the provision for NASA to provide sufficient incentives to achieve partner buy-in and commitment to the program. NASA has identified seven specific areas in which substantive incentives will be offered: (1) partners will be offered participation in governance of GPM mission science affairs including definition of data products; (2) partners will be offered use of NASA's TDRSS capability for uplink and downlink of commands and data in regards to partner provided spacecraft; (3) partners will be offered launch support for placing partner provided spacecraft in orbit conditional upon mutually agreeable co-manifest arrangements; (4) partners will be offered direct data access at the NASA-GPM server level rather than through standard data distribution channels; (5) partners will be offered the opportunity to serve as regional data archive and distribution centers for standard GPM data products; and (6) partners will be offered the option to insert their own specialized filtering and extraction software into the GPM data processing stream or to obtain specialized subsets and products over specific areas of interest (7) partners will be offered GPM developed software tools that can be run on their platforms. Each of these incentives, either individually or in combination, represents a significant advantage to partners who may wish to participate in the GPM mission.

Making DATA Work: A Process for Conducting Action Research

ERIC Educational Resources Information Center

Young, Anita; Kaffenberger, Carol

2013-01-01

This conceptual model introduces a process to help school counselors use data to drive decision making and offers examples to implement the process. A step-by-step process is offered to help school counselors and school counselor supervisors address educational issues, close achievement gaps, and demonstrate program effectiveness. To illustrate…

Chapter 28: Nanomaterials for Energy Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurst, Katherine E; Luther, Joseph M; Ban, Chunmei

2017-01-02

A wide variety of nanomaterials have been applied to energy related applications, including nanofibers, nanocrystalline materials, nanoparticles, and thin film nanocoatings. Solid-state lighting offers significant advantages in energy efficiency compared to traditional lighting technologies. The potential for nanostructured solid-state lighting devices is excellent as it enjoys significant economic drivers in energy efficiency. Fuel cells convert chemical energy to electrical energy through electrochemical reactions at an anode and cathode. The conversion of biomass to fuels and chemicals offers great potential to reduce energy dependence on petroleum and reduce green house gas emissions. Batteries involve the production and storage of electrical charge,more » the transfer of cations and electrical current, each based on electrochemical reactions and chemical reactants. Battery performance relies on the complex processes and factors that affect the transport of charge in the reactants, and across the interface between the chemical phases.« less

The law of incidental findings in human subjects research: establishing researchers' duties.

PubMed

Wolf, Susan M; Paradise, Jordan; Caga-anan, Charlisse

2008-01-01

Research technologies can now produce so much information that there is significant potential for incidental findings (IFs). These are findings generated in research that are beyond the aims of the study. Current law and federal regulations offer no direct guidance on how to deal with IFs in research, nor is there adequate professional or institutional guidance. We advocate a defined set of researcher duties based on law and ethics and recommend a pathway to be followed in handling IFs in research. This article traces the underlying ethical and legal theories supporting researcher duties to manage IFs, including duties to develop a plan for management in the research protocol, to discuss the possibility of and management plan for IFs in the informed consent process, and to address, evaluate, and ultimately offer to disclose IFs of potential clinical or reproductive significance to research participants when they arise.

The Contribution of Latino Studies to Social Science Research on Immigration. JSRI Occasional Paper No. 36. Latino Studies Series.

ERIC Educational Resources Information Center

Pedraza, Silvia

This paper offers a conceptual "map" of issues and approaches in immigration research and illustrates features of the map with the significant contributions of Latino Studies to immigration research. One axis of the map concerns the time line of various waves of immigration. Although research on immigrants and immigration processes was a…

Fostering Undergraduate Research Change at the System and Consortium Level: Perspectives from the Council on Undergraduate Research

ERIC Educational Resources Information Center

Malachowski, Mitchell; Osborn, Jeffrey M.; Karukstis, Kerry K.; Ambos, Elizabeth L.; Kincaid, Shontay L.; Weiler, Daniel

2015-01-01

In this final chapter, we summarize the lessons learned from working with six systems/consortia to enhance and expand undergraduate research. The theory of change model for systems/consortia differs in significant ways from the change processes exhibited by individual institutions, offering important insights for academic leaders as they seek to…

Optimizing the electronic health record to standardize administration and documentation of nutritional supplements

PubMed Central

Citty, Sandra W.; Kamel, Amir; Garvan, Cynthia; Marlowe, Lee; Westhoff, Lynn

2017-01-01

Malnutrition in hospitalized patients is a major cause for hospital re-admission, pressure ulcers and increased hospital costs. Methods to improve the administration and documentation of nutritional supplements for hospitalized patients are needed to improve patient care, outcomes and resource utilization. Staff at a medium-sized academic health science center hospital in the southeastern United States noted that nutritional supplements ordered for patients at high risk for malnutrition were not offered or administered to patients in a standardized manner and/or not documented clearly in the electronic health record as per prescription. This paper reports on a process improvement project that redesigned the ordering, administration and documentation process of oral nutritional supplements in the electronic health record. By adding nutritional products to the medication order sets and adding an electronic nutrition administration record (ENAR) tab, the multidisciplinary team sought to standardize nutritional supplement ordering, documentation and administration at prescribed intervals. This process improvement project used a triangulated approach to evaluating pre- and post-process change including: medical record reviews, patient interviews, and nutrition formula room log reports. Staff education and training was carried out prior to initiation of the system changes. This process change resulted in an average decrease in the return of unused nutritional formula from 76% returned at baseline to 54% post-process change. The process change resulted in 100% of nutritional supplement orders having documentation about nutritional medication administration and/or reason for non-administration. Documentation in the ENAR showed that 41% of ONS orders were given and 59% were not given. Significantly more patients reported being offered the ONS product (p=0.0001) after process redesign and more patients (5% before ENAR and 86% after ENAR reported being offered the correct type, amount and frequency of nutritional products (p=0.0001). ENAR represented an effective strategy to improve administration and documentation of nutritional supplements for hospitalized patients. PMID:28243439

Optimizing the electronic health record to standardize administration and documentation of nutritional supplements.

PubMed

Citty, Sandra W; Kamel, Amir; Garvan, Cynthia; Marlowe, Lee; Westhoff, Lynn

2017-01-01

Malnutrition in hospitalized patients is a major cause for hospital re-admission, pressure ulcers and increased hospital costs. Methods to improve the administration and documentation of nutritional supplements for hospitalized patients are needed to improve patient care, outcomes and resource utilization. Staff at a medium-sized academic health science center hospital in the southeastern United States noted that nutritional supplements ordered for patients at high risk for malnutrition were not offered or administered to patients in a standardized manner and/or not documented clearly in the electronic health record as per prescription. This paper reports on a process improvement project that redesigned the ordering, administration and documentation process of oral nutritional supplements in the electronic health record. By adding nutritional products to the medication order sets and adding an electronic nutrition administration record (ENAR) tab, the multidisciplinary team sought to standardize nutritional supplement ordering, documentation and administration at prescribed intervals. This process improvement project used a triangulated approach to evaluating pre- and post-process change including: medical record reviews, patient interviews, and nutrition formula room log reports. Staff education and training was carried out prior to initiation of the system changes. This process change resulted in an average decrease in the return of unused nutritional formula from 76% returned at baseline to 54% post-process change. The process change resulted in 100% of nutritional supplement orders having documentation about nutritional medication administration and/or reason for non-administration. Documentation in the ENAR showed that 41% of ONS orders were given and 59% were not given. Significantly more patients reported being offered the ONS product (p=0.0001) after process redesign and more patients (5% before ENAR and 86% after ENAR reported being offered the correct type, amount and frequency of nutritional products (p=0.0001). ENAR represented an effective strategy to improve administration and documentation of nutritional supplements for hospitalized patients.

Abnormal emotion processing, but intact fairness and intentionality considerations during social decision-making in schizophrenia.

PubMed

de la Asuncion, Javier; Docx, Lise; Sabbe, Bernard; Morrens, Manuel; de Bruijn, Ellen R A

2015-01-01

Schizophrenia is a severe mental disorder that is highly characterized by social cognitive impairments. Most studies investigating these impairments focus on one specific social domain such as emotion recognition. However, in daily life, processing complex social situations relies on the combination of several social cognitive and affective processes simultaneously rather than one process alone. A modified version of the economically based Ultimatum Game was used to measure the interplay between fairness, intentionality, and emotion considerations during social decision-making. In this task, participants accept or reject fair and unfair monetary offers proposed intentionally or unintentionally by either angry, happy, neutral, or sad proposers. Behavioral data was collected from a group of schizophrenia patients (N = 35) and a group of healthy individuals (N = 30). Like healthy participants, schizophrenia patients differentiated between fair and unfair offers by rejecting unfair offers more compared to fair offers. However, overall patients did reject more fair offers, indicating that their construct of fairness operates within different margins. In both groups, intentional unfair offers were rejected more compared to unintentional ones, indicating a normal integration of intentionality considerations in schizophrenia. Importantly, healthy subjects also differentiated between proposers' emotion when rejecting unfair offers (more rejections from proposers depicting angry faces compared to proposers depicting, happy, neutral, or sad faces). Schizophrenia patients' decision behavior on the other hand, was not affected by the proposers' emotions. The current study thus shows that schizophrenia patients have specific problems with processing and integrating emotional information. Importantly, the finding that patients display normal fairness and intentionality considerations emphasizes preservation of central social cognitive processes in schizophrenia.

Equipment management risk rating system based on engineering endpoints.

PubMed

James, P J

1999-01-01

The equipment management risk ratings system outlined here offers two significant departures from current practice: risk classifications are based on intrinsic device risks, and the risk rating system is based on engineering endpoints. Intrinsic device risks are categorized as physical, clinical and technical, and these flow from the incoming equipment assessment process. Engineering risk management is based on verification of engineering endpoints such as clinical measurements or energy delivery. This practice eliminates the ambiguity associated with ranking risk in terms of physiologic and higher-level outcome endpoints such as no significant hazards, low significance, injury, or mortality.

The neural basis of economic decision-making in the Ultimatum Game.

PubMed

Sanfey, Alan G; Rilling, James K; Aronson, Jessica A; Nystrom, Leigh E; Cohen, Jonathan D

2003-06-13

The nascent field of neuroeconomics seeks to ground economic decision making in the biological substrate of the brain. We used functional magnetic resonance imaging of Ultimatum Game players to investigate neural substrates of cognitive and emotional processes involved in economic decision-making. In this game, two players split a sum of money;one player proposes a division and the other can accept or reject this. We scanned players as they responded to fair and unfair proposals. Unfair offers elicited activity in brain areas related to both emotion (anterior insula) and cognition (dorsolateral prefrontal cortex). Further, significantly heightened activity in anterior insula for rejected unfair offers suggests an important role for emotions in decision-making.

Weather Indices for Designing Micro-Insurance Products for Small-Holder Farmers in the Tropics

PubMed Central

Díaz Nieto, Jacqueline; Fisher, Myles; Cook, Simon; Läderach, Peter; Lundy, Mark

2012-01-01

Agriculture is inherently risky. Drought is a particularly troublesome hazard that has a documented adverse impact on agricultural development. A long history of decision-support tools have been developed to try and help farmers or policy makers manage risk. We offer site-specific drought insurance methodology as a significant addition to this process. Drought insurance works by encapsulating the best available scientific estimate of drought probability and severity at a site within a single number- the insurance premium, which is offered by insurers to insurable parties in a transparent risk-sharing agreement. The proposed method is demonstrated in a case study for dry beans in Nicaragua. PMID:22737210

The Neural Basis of Economic Decision-Making in the Ultimatum Game

NASA Astrophysics Data System (ADS)

Sanfey, Alan G.; Rilling, James K.; Aronson, Jessica A.; Nystrom, Leigh E.; Cohen, Jonathan D.

2003-06-01

The nascent field of neuroeconomics seeks to ground economic decision- making in the biological substrate of the brain. We used functional magnetic resonance imaging of Ultimatum Game players to investigate neural substrates of cognitive and emotional processes involved in economic decision-making. In this game, two players split a sum of money; one player proposes a division and the other can accept or reject this. We scanned players as they responded to fair and unfair proposals. Unfair offers elicited activity in brain areas related to both emotion (anterior insula) and cognition (dorsolateral prefrontal cortex). Further, significantly heightened activity in anterior insula for rejected unfair offers suggests an important role for emotions in decision-making.

Chemistry in microstructured reactors.

PubMed

Jähnisch, Klaus; Hessel, Volker; Löwe, Holger; Baerns, Manfred

2004-01-16

The application of microstructured reactors in the chemical process industry has gained significant importance in recent years. Companies that offer not only microstructured reactors, but also entire chemical process plants and services relating to them, are already in existence. In addition, many institutes and universities are active within this field, and process-engineering-oriented reviews and a specialized book are available. Microstructured systems can be applied with particular success in the investigation of highly exothermic and fast reactions. Often the presence of temperature-induced side reactions can be significantly reduced through isothermal operations. Although microstructured reaction techniques have been shown to optimize many synthetic procedures, they have not yet received the attention they deserve in organic chemistry. For this reason, this Review aims to address this by providing an overview of the chemistry in microstructured reactors, grouped into liquid-phase, gas-phase, and gas-liquid reactions.

49 CFR 594.9 - Fee for reimbursement of bond processing costs and costs for processing offers of cash deposits...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Fee for reimbursement of bond processing costs and costs for processing offers of cash deposits or obligations of the United States in lieu of sureties on... indirect costs the agency incurs for receipt, processing, handling, and disbursement of cash deposits or...

Microwave vision for robots

NASA Technical Reports Server (NTRS)

Lewandowski, Leon; Struckman, Keith

1994-01-01

Microwave Vision (MV), a concept originally developed in 1985, could play a significant role in the solution to robotic vision problems. Originally our Microwave Vision concept was based on a pattern matching approach employing computer based stored replica correlation processing. Artificial Neural Network (ANN) processor technology offers an attractive alternative to the correlation processing approach, namely the ability to learn and to adapt to changing environments. This paper describes the Microwave Vision concept, some initial ANN-MV experiments, and the design of an ANN-MV system that has led to a second patent disclosure in the robotic vision field.

Status review of PMR polyimides. [Polymerization of Monomer Reactants

NASA Technical Reports Server (NTRS)

Serafini, T. T.

1979-01-01

In the NASA developed PMR (polymerization of monomer reactants) the reinforcing fibers are impregnated with a solution containing a mixture of monomers dissolved in a low boiling point alkyl alcohol solvent, with the monomers reacting in situ at elevated temperatures to form a thermo-oxidatively stable polyimide matrix. The current status of first and second generation PMR polyimides is reviewed, considering synthesis and properties, processing, and applications. It is concluded that the PMR approach offers various significant advantages, especially superior high temperature properties and processing versatility, to fabricators and users of polyimide/fiber composites.

Six Sigma in healthcare delivery.

PubMed

Liberatore, Matthew J

2013-01-01

The purpose of this paper is to conduct a comprehensive review and assessment of the extant Six Sigma healthcare literature, focusing on: application, process changes initiated and outcomes, including improvements in process metrics, cost and revenue. Data were obtained from an extensive literature search. Healthcare Six Sigma applications were categorized by functional area and department, key process metric, cost savings and revenue generation (if any) and other key implementation characteristics. Several inpatient care areas have seen most applications, including admission, discharge, medication administration, operating room (OR), cardiac and intensive care. About 42.1 percent of the applications have error rate as their driving metric, with the remainder focusing on process time (38 percent) and productivity (18.9 percent). While 67 percent had initial improvement in the key process metric, only 10 percent reported sustained improvement. Only 28 percent reported cost savings and 8 percent offered revenue enhancement. These results do not favorably assess Six Sigma's overall effectiveness and the value it offers healthcare. Results are based on reported applications. Future research can include directly surveying healthcare organizations to provide additional data for assessment. Future application should emphasize obtaining improvements that lead to significant and sustainable value. Healthcare staff can use the results to target promising areas. This article comprehensively assesses Six Sigma healthcare applications and impact.

Dental ceramics: a review of new materials and processing methods.

PubMed

Silva, Lucas Hian da; Lima, Erick de; Miranda, Ranulfo Benedito de Paula; Favero, Stéphanie Soares; Lohbauer, Ulrich; Cesar, Paulo Francisco

2017-08-28

The evolution of computerized systems for the production of dental restorations associated to the development of novel microstructures for ceramic materials has caused an important change in the clinical workflow for dentists and technicians, as well as in the treatment options offered to patients. New microstructures have also been developed by the industry in order to offer ceramic and composite materials with optimized properties, i.e., good mechanical properties, appropriate wear behavior and acceptable aesthetic characteristics. The objective of this literature review is to discuss the main advantages and disadvantages of the new ceramic systems and processing methods. The manuscript is divided in five parts: I) monolithic zirconia restorations; II) multilayered dental prostheses; III) new glass-ceramics; IV) polymer infiltrated ceramics; and V) novel processing technologies. Dental ceramics and processing technologies have evolved significantly in the past ten years, with most of the evolution being related to new microstructures and CAD-CAM methods. In addition, a trend towards the use of monolithic restorations has changed the way clinicians produce all-ceramic dental prostheses, since the more aesthetic multilayered restorations unfortunately are more prone to chipping or delamination. Composite materials processed via CAD-CAM have become an interesting option, as they have intermediate properties between ceramics and polymers and are more easily milled and polished.

Please Wait, Processing: A Selective Literature Review of the Neurological Understanding of Emotional Processing in ASD and Its Potential Contribution to Neuroeducation.

PubMed

Shyman, Eric

2017-11-17

Autism spectrum disorder (ASD) and its corresponding conditions have been investigated from a multitude of perspectives resulting in varying understandings of its origin, its outplay, its prognosis, and potential methods of intervention and education for individuals with the disorder. One area that has contributed significantly to providing a different type of understanding is that of neuroscience, and specifically neuroimaging. This paper will offer a selective literature review of research that investigates the role of emotional processing in ASD, and how a deepening of this line of understanding can be used to inform more comprehensive educational practices.

Laying-up of sterile instruments in the operating theatre: equal or superior protection by using a horizontal unidirectional air flow system.

PubMed

Traversari, A A L; Goedhart, C A; Dusseldorp, E; Bode, A; Keuning, F; Pelk, M S J; Vos, M C

2013-10-01

A system for the preparation of sterilized instruments with unidirectional horizontal air flow (UDHF) has several advantages over a unidirectional down flow system (UDDF). The advantages are based on the installation of the system being more flexible and easier to use, no cooling of the air flow being necessary and less air being needed for circulation, resulting in reduced energy use. The objective of this study was to determine whether a system with UDHF performs equal or superior to a system with UDDF in terms of prevention of contamination of the air (the presence of particles and micro-organisms) during the laying-up process. The degree of protection (DP) offered by two UDHF system variants and two UDDF system variants was determined for several static set-ups and a dynamic simulation of the process. In addition to determining the level of protection for several categories of particle size, colony-forming units (CFU) were also measured during process simulations. When maximum protection (no particles present) is considered, the UDHF systems performed significantly better than the UDDF systems for particles ≥2.5μm. When particles were present, there was no significant difference between systems for particles ≥0.3 and ≥0.5μm. However, the performance of the UDHF system was superior to that of the UDDF system (DP) for particles ≥1.0μm representing the bacteria-carrying particles. During the process measurements, no CFU were found with the UDDF system in 64% of the measurements, compared with 90% for the UDHF system (P = 0.012). The UDHF system offers equal or superior protection to the UDDF system against contamination of the clean area within which the laying up takes place. Despite our finding that the differences did not always reach statistical significance (due to low background concentrations), there is a clear trend, from the small-sized particles (≥1.0μm) up to the largest sizes considered, including bacteria-carrying particles, that demonstrates the superiority of the horizontal flow system. The UDHF system offers a more robust solution than the UDDF system, provided that good work instructions are given and the height of the table and height of the plenum are properly adjusted. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Unexpected Self-Expression and the Limits of Narrative Inquiry: Exploring Unconscious Dynamics in a Community-Based Digital Storytelling Workshop

ERIC Educational Resources Information Center

Brushwood Rose, Chloe; Granger, Colette A.

2013-01-01

This study explores the tension between self-knowledge and self-expression, and how it manifests in the processes of storytelling that unfold in digital storytelling workshops offered to new immigrant women living in Toronto, Canada. Both in their multi-modal complexity and in the significant shifts from their original telling, the digital stories…

Assessment of Government Quality Indicators (AGQI) in Afghanistan: Initial Assessment in Three Afghan Cities Using a Standardized Assessment Tool and Potential for Application of AGQI in Future Operations

DTIC Science & Technology

2005-06-01

Afghanistan References Bryman A. The debate about quantitative and qualitative research : a question of method or epistemology. British Journal of...offers a significant advance over other assessment methods employed by civil affairs units. Involved units agreed that the process was well worth...1 Methods

Additive Manufacturing: A Novel Method for Fabricating Cobalt-Chromium Removable Partial Denture Frameworks.

PubMed

Alifui-Segbaya, Frank; Williams, Robert John; George, Roy

2017-06-01

Additive manufacturing (AM) often referred to as 3D printing (3DP) has shown promise of being significantly viable in the construction of cobalt-chromium removable partial denture (RPD) frameworks. The current paper seeks to discuss AM technologies (photopolymerization processes and selective laser melting) and review their scope. The review also discusses the clinical relevance of cobalt-chromium RPD frameworks. All relevant publications in English over the last 10 years, when the first 3D-printed RPD framework was reported, are examined. The review notes that AM offers significant benefits in terms of speed of the manufacturing processes however cost and other aspects of current technologies remain a hindrance. Copyright© 2017 Dennis Barber Ltd.

Blended Learning: The Student Viewpoint.

PubMed

Shantakumari, N; Sajith, P

2015-01-01

Blended learning (BL) is defined as "a way of meeting the challenges of tailoring learning and development to the needs of individuals by integrating the innovative and technological advances offered by online learning with the interaction and participation offered in the best of traditional learning." The Gulf Medical University (GMU), Ajman, UAE, offers a number of courses which incorporate BL with contact classes and online component on an E-learning platform. Insufficient learning satisfaction has been stated as an obstacle to its implementation and efficacy. To determine the students' perceptions toward BL which in turn will determine their satisfaction and the efficacy of the courses offered. This was a cross-sectional study conducted at the GMU, Ajman between January and December 2013. Perceptions of BL process, content, and ease of use were collected from 75 students enrolled in the certificate courses offered by the university using a questionnaire. Student perceptions were assessed using Mann-Whitney U-test and Kruskal-Wallis test on the basis of gender, age, and course enrollment. The median scores of all the questions in the three domains were above three suggesting positive perceptions on BL. The distribution of perceptions was similar between gender and age. However, significant differences were observed in the course enrollment (P = 0.02). Students hold a positive perception of the BL courses being offered in this university. The difference in perceptions among students of different courses suggest that the BL format offered needs modification according to course content to improve its perception.

Abnormal emotion processing, but intact fairness and intentionality considerations during social decision-making in schizophrenia

PubMed Central

de la Asuncion, Javier; Docx, Lise; Sabbe, Bernard; Morrens, Manuel; de Bruijn, Ellen R. A.

2015-01-01

Schizophrenia is a severe mental disorder that is highly characterized by social cognitive impairments. Most studies investigating these impairments focus on one specific social domain such as emotion recognition. However, in daily life, processing complex social situations relies on the combination of several social cognitive and affective processes simultaneously rather than one process alone. A modified version of the economically based Ultimatum Game was used to measure the interplay between fairness, intentionality, and emotion considerations during social decision-making. In this task, participants accept or reject fair and unfair monetary offers proposed intentionally or unintentionally by either angry, happy, neutral, or sad proposers. Behavioral data was collected from a group of schizophrenia patients (N = 35) and a group of healthy individuals (N = 30). Like healthy participants, schizophrenia patients differentiated between fair and unfair offers by rejecting unfair offers more compared to fair offers. However, overall patients did reject more fair offers, indicating that their construct of fairness operates within different margins. In both groups, intentional unfair offers were rejected more compared to unintentional ones, indicating a normal integration of intentionality considerations in schizophrenia. Importantly, healthy subjects also differentiated between proposers’ emotion when rejecting unfair offers (more rejections from proposers depicting angry faces compared to proposers depicting, happy, neutral, or sad faces). Schizophrenia patients’ decision behavior on the other hand, was not affected by the proposers’ emotions. The current study thus shows that schizophrenia patients have specific problems with processing and integrating emotional information. Importantly, the finding that patients display normal fairness and intentionality considerations emphasizes preservation of central social cognitive processes in schizophrenia. PMID:26257699

Critical review of real-time methods for solid waste characterisation: Informing material recovery and fuel production.

PubMed

Vrancken, C; Longhurst, P J; Wagland, S T

2017-03-01

Waste management processes generally represent a significant loss of material, energy and economic resources, so legislation and financial incentives are being implemented to improve the recovery of these valuable resources whilst reducing contamination levels. Material recovery and waste derived fuels are potentially valuable options being pursued by industry, using mechanical and biological processes incorporating sensor and sorting technologies developed and optimised for recycling plants. In its current state, waste management presents similarities to other industries that could improve their efficiencies using process analytical technology tools. Existing sensor technologies could be used to measure critical waste characteristics, providing data required by existing legislation, potentially aiding waste treatment processes and assisting stakeholders in decision making. Optical technologies offer the most flexible solution to gather real-time information applicable to each of the waste mechanical and biological treatment processes used by industry. In particular, combinations of optical sensors in the visible and the near-infrared range from 800nm to 2500nm of the spectrum, and different mathematical techniques, are able to provide material information and fuel properties with typical performance levels between 80% and 90%. These sensors not only could be used to aid waste processes, but to provide most waste quality indicators required by existing legislation, whilst offering better tools to the stakeholders. Copyright © 2017 Elsevier Ltd. All rights reserved.

Production of C-14 and neutrons in red giants

NASA Technical Reports Server (NTRS)

Cowan, J. J.; Rose, W. K.

1977-01-01

We have examined the effects of mixing various amounts of hydrogen-rich material into the intershell convective region of red giants undergoing helium shell flashes. We find that significant amounts of C-14 can be produced via the N-14(n, p)C-14 reaction. If substantial portions of this intershell region are mixed out into the envelopes of red giants, then C-14 may be detectable in evolved stars. We find a neutron flux many orders of magnitude above the flux required for the classical s-process, and thus an intermediate neutron process (i-process) may operate in evolved red giants. In all cases studied we find substantial enhancements of O-17. These mixing models offer a plausible explanation of the observations of enhanced O-17 in the carbon star IRC 10216. For certain physical conditions we find significant enhancements of N-15 in the intershell region.

Single-molecule detection of dihydroazulene photo-thermal reaction using break junction technique

NASA Astrophysics Data System (ADS)

Huang, Cancan; Jevric, Martyn; Borges, Anders; Olsen, Stine T.; Hamill, Joseph M.; Zheng, Jue-Ting; Yang, Yang; Rudnev, Alexander; Baghernejad, Masoud; Broekmann, Peter; Petersen, Anne Ugleholdt; Wandlowski, Thomas; Mikkelsen, Kurt V.; Solomon, Gemma C.; Brøndsted Nielsen, Mogens; Hong, Wenjing

2017-05-01

Charge transport by tunnelling is one of the most ubiquitous elementary processes in nature. Small structural changes in a molecular junction can lead to significant difference in the single-molecule electronic properties, offering a tremendous opportunity to examine a reaction on the single-molecule scale by monitoring the conductance changes. Here, we explore the potential of the single-molecule break junction technique in the detection of photo-thermal reaction processes of a photochromic dihydroazulene/vinylheptafulvene system. Statistical analysis of the break junction experiments provides a quantitative approach for probing the reaction kinetics and reversibility, including the occurrence of isomerization during the reaction. The product ratios observed when switching the system in the junction does not follow those observed in solution studies (both experiment and theory), suggesting that the junction environment was perturbing the process significantly. This study opens the possibility of using nano-structured environments like molecular junctions to tailor product ratios in chemical reactions.

Image processing via VLSI: A concept paper

NASA Technical Reports Server (NTRS)

Nathan, R.

1982-01-01

Implementing specific image processing algorithms via very large scale integrated systems offers a potent solution to the problem of handling high data rates. Two algorithms stand out as being particularly critical -- geometric map transformation and filtering or correlation. These two functions form the basis for data calibration, registration and mosaicking. VLSI presents itself as an inexpensive ancillary function to be added to almost any general purpose computer and if the geometry and filter algorithms are implemented in VLSI, the processing rate bottleneck would be significantly relieved. A set of image processing functions that limit present systems to deal with future throughput needs, translates these functions to algorithms, implements via VLSI technology and interfaces the hardware to a general purpose digital computer is developed.

Fold-Back: Using Emerging Technologies to Move from Quality Assurance to Quality Enhancement

ERIC Educational Resources Information Center

Leonard, Simon N.; Fitzgerald, Robert N.; Bacon, Matt

2016-01-01

Emerging technologies offer an opportunity for the development, at the institutional level, of quality processes with greater capacity to enhance learning in higher education than available through current quality processes. These systems offer the potential to extend use of learning analytics in institutional-level quality processes in addition…

Evidential Reasoning in Expert Systems for Image Analysis.

DTIC Science & Technology

1985-02-01

techniques to image analysis (IA). There is growing evidence that these techniques offer significant improvements in image analysis , particularly in the...2) to provide a common framework for analysis, (3) to structure the ER process for major expert-system tasks in image analysis , and (4) to identify...approaches to three important tasks for expert systems in the domain of image analysis . This segment concluded with an assessment of the strengths

Development of a solar-powered residential air conditioner

NASA Technical Reports Server (NTRS)

1975-01-01

The initial objective of the program was the optimization (in terms of cost and performance) of a Rankine cycle mechanical refrigeration system which utilizes thermal energy from a flat solar collector for air conditioning residential buildings. However, feasibility investigations of the adsorption process revealed that a dessicant-type air conditioner offers many significant advantages. As a result, limited efforts were expended toward the optimization of such a system.

Study for identification of beneficial uses of space, phase 1. Volume 2, book 1: Technical report, introduction, methodology, results

NASA Technical Reports Server (NTRS)

1973-01-01

A study was conducted to determine the beneficial uses of space and to identify the products, processes, or services that will be best developed or produced in the unique environment offered by spacecraft. The subjects discussed are: (1) review of study background, (2) specific users and uses, (3) methodology, and (4) basic data generated and significant results.

The Cambridge Garden House Hotel Riot of 1970 and Its Place in the History of British Student Protests

ERIC Educational Resources Information Center

Crook, David

2006-01-01

This article highlights a violent incident in the history of British student protests and outlines the judicial process that resulted. A wider consideration of student protests of the late 1960s and early 1970s, both in the UK and overseas is offered, together with some consideration of the significance of this particular case. At the time of the…

Educating Captains For War: Deliberately Designing Professional Military Education

DTIC Science & Technology

2015-05-23

CCC ) Curricula. Many researchers and scholars have written on the subject of education and offered insights on how to improve curricula based on...curricula were developed. Did the SALT deliberately and sufficiently develop current CCC curricula to enable captains to meet the demands of complex...the SALT underwent to design current CCC curricula, this monograph argues that the SALT used a deliberate design process and has significantly

Process cost and facility considerations in the selection of primary cell culture clarification technology.

PubMed

Felo, Michael; Christensen, Brandon; Higgins, John

2013-01-01

The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes <1,000 L, clarification using multi-stage depth filtration offers cost savings compared to clarification using centrifugation. For bioreactor volumes >5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

From laser spectroscopy research to nonlinear optics instruction

NASA Astrophysics Data System (ADS)

de la Rosa, M. I.; Pérez, C.; Grützmacher, K.

2005-10-01

In this paper we describe how to join the two fundamental activities of a university professor: research and teaching. The work of our research team is devoted to the applications of two photon polarization spectroscopy to plasmas and combustion processes diagnostics. As a result of this work now we have powerful equipment and experience on nonlinear processes. Therefore, we decided to offer Nonlinear Optics as an elective subject, to the students in the last year of the Physics Degree at Valladolid University. We conclude that research at the University acquires its total significance when it is applied to the student's instruction.

Carbon-hydrogen to carbon-phosphorus transformations.

PubMed

Montchamp, Jean-Luc

2015-01-01

Literature published between 2008 and 2013 concerning the functionalization of carbon-hydrogen into carbon-phosphorus bonds is surveyed. The chapter is organized by reaction mechanism. The majority of methods still proceed via deprotonation of C-H into C-M (M=Li, Na, etc.) followed by reaction with a phosphorus electrophile P-X, where X is usually chlorine. A few examples of electrophilic aromatic substitution and related processes have also been reported, although this approach has not yet been developed significantly. Over the past 5 years a rapidly growing family of reactions includes transition metal "C-H activation" and formally related radical-based processes has been developed. The latter processes offer exciting prospects for the synthesis of organophosphorus compounds.

Please Wait, Processing: A Selective Literature Review of the Neurological Understanding of Emotional Processing in ASD and Its Potential Contribution to Neuroeducation

PubMed Central

Shyman, Eric

2017-01-01

Autism spectrum disorder (ASD) and its corresponding conditions have been investigated from a multitude of perspectives resulting in varying understandings of its origin, its outplay, its prognosis, and potential methods of intervention and education for individuals with the disorder. One area that has contributed significantly to providing a different type of understanding is that of neuroscience, and specifically neuroimaging. This paper will offer a selective literature review of research that investigates the role of emotional processing in ASD, and how a deepening of this line of understanding can be used to inform more comprehensive educational practices. PMID:29149018

Supercritical Carbon Dioxide-Assisted Decellularization of Aorta and Cornea.

PubMed

Guler, Selcan; Aslan, Bahar; Hosseinian, Pezhman; Aydin, Halil Murat

2017-09-01

Tissue engineering approaches utilize both natural and synthetic materials in the repair and regeneration processes. A naturally sourced material for this purpose is required to be free from any antigenic matter such as cells or cellular components. Decellularization of tissues may be achieved through chemical or physical removal agents. Supercritical carbon dioxide (sc-CO 2 ) has been used on the purpose of removing bioburden from tissues and offers an alternative to the traditionally used treatment methods. In addition to many advantages it offers with regard to the successful decellularization of tissues, it is known to have a sterilization effect. This study provides an insight into sc-CO 2 -assisted decellularization trials of corneal and aortic tissues. Results showed that high pressure of the fluid bursts the cells during the treatment and rapid depressurization was found to be effective in the removal of the cells from the tissues. sc-CO 2 decellularization offers significantly reduced treatment times, complete decellularization, and preserved extracellular matrix structure.

Materials and structures technology insertion into spacecraft systems: Successes and challenges

NASA Astrophysics Data System (ADS)

Rawal, Suraj

2018-05-01

Over the last 30 years, significant advancements have led to the use of multifunctional materials and structures technologies in spacecraft systems. This includes the integration of adaptive structures, advanced composites, nanotechnology, and additive manufacturing technologies. Development of multifunctional structures has been directly influenced by the implementation of processes and tools for adaptive structures pioneered by Prof. Paolo Santini. Multifunctional materials and structures incorporating non-structural engineering functions such as thermal, electrical, radiation shielding, power, and sensors have been investigated. The result has been an integrated structure that offers reduced mass, packaging volume, and ease of integration for spacecraft systems. Current technology development efforts are being conducted to develop innovative multifunctional materials and structures designs incorporating advanced composites, nanotechnology, and additive manufacturing. However, these efforts offer significant challenges in the qualification and acceptance into spacecraft systems. This paper presents a brief overview of the technology development and successful insertion of advanced material technologies into spacecraft structures. Finally, opportunities and challenges to develop and mature next generation advanced materials and structures are presented.

The Difficult Process of Scientific Modelling: An Analysis Of Novices' Reasoning During Computer-Based Modelling

ERIC Educational Resources Information Center

Sins, Patrick H. M.; Savelsbergh, Elwin R.; van Joolingen, Wouter R.

2005-01-01

Although computer modelling is widely advocated as a way to offer students a deeper understanding of complex phenomena, the process of modelling is rather complex itself and needs scaffolding. In order to offer adequate support, a thorough understanding of the reasoning processes students employ and of difficulties they encounter during a…

3D printing of tablets using inkjet with UV photoinitiation.

PubMed

Clark, Elizabeth A; Alexander, Morgan R; Irvine, Derek J; Roberts, Clive J; Wallace, Martin J; Sharpe, Sonja; Yoo, Jae; Hague, Richard J M; Tuck, Chris J; Wildman, Ricky D

2017-08-30

Additive manufacturing (AM) offers significant potential benefits in the field of drug delivery and pharmaceutical/medical device manufacture. Of AM processes, 3D inkjet printing enables precise deposition of a formulation, whilst offering the potential for significant scale up or scale out as a manufacturing platform. This work hypothesizes that suitable solvent based ink formulations can be developed that allow the production of solid dosage forms that meet the standards required for pharmaceutical tablets, whilst offering a platform for flexible and personalized manufacture. We demonstrate this using piezo-activated inkjetting to 3D print ropinirole hydrochloride. The tablets produced consist of a cross-linked poly(ethylene glycol diacrylate) (PEGDA) hydrogel matrix containing the drug, photoinitiated in a low oxygen environment using an aqueous solution of Irgacure 2959. At a Ropinirole HCl loading of 0.41mg, drug release from the tablet is shown to be Fickian. Raman and IR spectroscopy indicate a high degree of cross-linking and formation of an amorphous solid dispersion. This is the first publication of a UV inkjet 3D printed tablet. Consequently, this work opens the possibility for the translation of scalable, high precision and bespoke ink-jet based additive manufacturing to the pharmaceutical sector. Copyright © 2017. Published by Elsevier B.V.

Flash NanoPrecipitation (FNP) for bioengineering nanoparticles to enhance the bioavailability

NASA Astrophysics Data System (ADS)

Feng, Jie; Zhang, Yingyue; McManus, Simone; Prud'Homme, Robert

2017-11-01

Nanoparticles for the delivery of therapeutics have been one of the successful areas in biomedical nanotechnology. Nanoparticles improve bioavailability by 1) the higher surface-to-volume ratios, enhancing dissolution rates, and 2) trapping drug molecules in higher energy, amorphous states for a higher solubility. However, conventional direct precipitation to prepare nanoparticles has the issues of low loading and encapsulation efficiency. Here we demonstrate a kinetically controlled and rapid-precipitation process called Flash NanoPrecipitation (FNP), to offer a multi-phase mixing platform for bioengineering nanoparticles. With the designed geometry in the micro-mixer, we can generate nanoparticles with a narrow size distribution, while maintaining high loading and encapsulation efficiency. By controlling the time scales in FNP, we can tune the nanoparticle size and the robustness of the process. Remarkably, the dissolution rates of the nanoparticles are significantly improved compared with crystalline drug powders. Furthermore, we investigate how to recover the drug-loaded nanoparticles from the aqueous dispersions. Regarding the maintenance of the bioavailability, we discuss the advantages and disadvantages of each drying process. These results suggest that FNP offers a versatile and scalable nano-fabrication platform for biomedical engineering.

Digital prototyping technique applied for redesigning plastic products

NASA Astrophysics Data System (ADS)

Pop, A.; Andrei, A.

2015-11-01

After products are on the market for some time, they often need to be redesigned to meet new market requirements. New products are generally derived from similar but outdated products. Redesigning a product is an important part of the production and development process. The purpose of this paper is to show that using modern technology, like Digital Prototyping in industry is an effective way to produce new products. This paper tries to demonstrate and highlight the effectiveness of the concept of Digital Prototyping, both to reduce the design time of a new product, but also the costs required for implementing this step. The results of this paper show that using Digital Prototyping techniques in designing a new product from an existing one available on the market mould offers a significantly manufacturing time and cost reduction. The ability to simulate and test a new product with modern CAD-CAM programs in all aspects of production (designing of the 3D model, simulation of the structural resistance, analysis of the injection process and beautification) offers a helpful tool for engineers. The whole process can be realised by one skilled engineer very fast and effective.

Influence of fractal substructures of the percolating cluster on transferring processes in macroscopically disordered environments

NASA Astrophysics Data System (ADS)

Kolesnikov, B. P.

2017-11-01

The presented work belongs to the issue of searching for the effective kinetic properties of macroscopically disordered environments (MDE). These properties characterize MDE in general on the sizes which significantly exceed the sizes of macro inhomogeneity. The structure of MDE is considered as a complex of interpenetrating percolating and finite clusters consolidated from homonymous components, topological characteristics of which influence on the properties of the whole environment. The influence of percolating clusters’ fractal substructures (backbone, skeleton of backbone, red bonds) on the transfer processes during crossover (a structure transition from fractal to homogeneous condition) is investigated based on the offered mathematical approach for finding the effective conductivity of MDEs and on the percolating cluster model. The nature of the change of the critical conductivity index t during crossover from the characteristic value for the area close to percolation threshold to the value corresponded to homogeneous condition is demonstrated. The offered model describes the transfer processes in MDE with the finite conductivity relation of «conductive» and «low conductive» phases above and below percolation threshold and in smearing area (an analogue of a blur area of the second-order phase transfer).

Point-to-Point! Validation of the Small Aircraft Transportation System Higher Volume Operations Concept

NASA Technical Reports Server (NTRS)

Williams, Daniel M.

2006-01-01

Described is the research process that NASA researchers used to validate the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept. The four phase building-block validation and verification process included multiple elements ranging from formal analysis of HVO procedures to flight test, to full-system architecture prototype that was successfully shown to the public at the June 2005 SATS Technical Demonstration in Danville, VA. Presented are significant results of each of the four research phases that extend early results presented at ICAS 2004. HVO study results have been incorporated into the development of the Next Generation Air Transportation System (NGATS) vision and offer a validated concept to provide a significant portion of the 3X capacity improvement sought after in the United States National Airspace System (NAS).

Blended Learning: The Student Viewpoint

PubMed Central

Shantakumari, N; Sajith, P

2015-01-01

Background: Blended learning (BL) is defined as “a way of meeting the challenges of tailoring learning and development to the needs of individuals by integrating the innovative and technological advances offered by online learning with the interaction and participation offered in the best of traditional learning.” The Gulf Medical University (GMU), Ajman, UAE, offers a number of courses which incorporate BL with contact classes and online component on an E-learning platform. Insufficient learning satisfaction has been stated as an obstacle to its implementation and efficacy. Aim: To determine the students’ perceptions toward BL which in turn will determine their satisfaction and the efficacy of the courses offered. Subjects and Methods: This was a cross-sectional study conducted at the GMU, Ajman between January and December 2013. Perceptions of BL process, content, and ease of use were collected from 75 students enrolled in the certificate courses offered by the university using a questionnaire. Student perceptions were assessed using Mann–Whitney U-test and Kruskal–Wallis test on the basis of gender, age, and course enrollment. Results: The median scores of all the questions in the three domains were above three suggesting positive perceptions on BL. The distribution of perceptions was similar between gender and age. However, significant differences were observed in the course enrollment (P = 0.02). Conclusion Students hold a positive perception of the BL courses being offered in this university. The difference in perceptions among students of different courses suggest that the BL format offered needs modification according to course content to improve its perception. PMID:26500788

Cosmology and Globalization

NASA Astrophysics Data System (ADS)

Perkins, D. K.

2006-08-01

Microbes swarming on a sand grain planet or integral complex organisms evolving consciousness at the forefront of cosmic evolution? How is our new cosmology contributing to redefining who we see ourselves to be at the edge of the 21^st century, as globalization and capitalism speed forward? How is the evolution of stardust and the universe offering new paradigms of process and identity regarding the role, function and emergence of life in space-time? What are the cultural and philosophical questions that are arising and how might astronomy be contributing to the creation of new visions for cooperation and community at a global scale? What is the significance of including astronomy in K-12 education and what can it offer youth regarding values in light of the present world situation? Exploring our new cosmological concepts and the emergence of life at astronomical scales may offer much of valuable orientation toward reframing the human role in global evolution. Considering new insight from astrobiology each diverse species has a definitive role to play in the facilitation and functioning of the biosphere. Thus the question may arise: Is there any sort of ethic implied by natural science and offered by our rapidly expanding cosmic frontier?

Process economics and safety considerations for the oxidative dehydrogenation of ethane using the M1 catalyst

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baroi, Chinmoy; Gaffney, Anne M.; Fushimi, Rebecca

Olefins or unsaturated hydrocarbons play a vital role as feedstock for many industrially significant processes. Ethylene is the simplest olefin and a key raw material for consumer products. Oxidative Dehydrogenation (ODH) is one of the most promising new routes for ethylene production that can offer a significant advantage in energy efficiency over the conventional steam pyrolysis process. This study is focused on the ODH chemistry using the mixed metal oxide MoVTeNbOx catalysts, generally referred to as M1 for the key phase known to be active for dehydrogenation. Using performance results from the patent literature a series of process simulations weremore » conducted to evaluate the effect of feed composition on operating costs, profitability and process safety. The key results of this study indicate that the ODH reaction can be made safer and more profitable without use of an inert diluent and furthermore by replacing O2 with CO2 as an oxidant. Modifications of the M1 catalyst composition in order to adopt these changes are discussed.« less

Pad ultrasonic batch dyeing of causticized lyocell fabric with reactive dyes.

PubMed

Babar, Aijaz Ahmed; Peerzada, Mazhar Hussain; Jhatial, Abdul Khalique; Bughio, Noor-Ul-Ain

2017-01-01

Conventionally, cellulosic fabric dyed with reactive dyes requires significant amount of salt. However, the dyeing of a solvent spun regenerated cellulosic fiber is a critical process. This paper presents the dyeing results of lyocell fabrics dyed with conventional pad batch (CPB) and pad ultrasonic batch (PUB) processes. The dyeing of lyocell fabrics was carried out with two commercial dyes namely Drimarine Blue CL-BR and Ramazol Blue RGB. Dyeing parameters including concentration of sodium hydroxide, sodium carbonate and dwell time were compared for the two processes. The outcomes show that PUB dyed samples offered reasonably higher color yield and dye fixation than CPB dyed samples. A remarkable reduction of 12h in batching time, 18ml/l in NaOH and 05g/l in Na 2 CO 3 quantity was observed for PUB processed samples producing similar results compared to CPB process, making PUB a more economical, productive and an environment friendly process. Color fastness examination witnessed identical results for both PUB and CPB methods. No significant change in surface morphology of PUB processed samples was observed through scanning electron microscope (SEM) analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

More Fight-Less Fuel: Reducing Fuel Burn through Ground Process Improvement

DTIC Science & Technology

2013-06-01

These joint government and commercial air operations management suites are fast, accurate, and offer many of 33 same tools as SPADE. However, the U.S...passing hour of the day. Simulating the operations at an airfield is similar to a host of related operations management problems including restaurant...flight line may yield significant fuel and cost reductions. Focusing on the efficient use of ground resources through air operations management in a

Emancipated minors: health policy and implications for nursing.

PubMed

Lane, Susan H; Kohlenberg, Eileen

2012-10-01

Emancipation is a process that offers adolescents a solution to serve in the role of an adult in circumstances that warrant the need for more autonomy. The process and definitions of emancipation are often ambiguous for adolescents, nurses, and other health care providers that provide services for these individuals. Emancipation can be additionally perplexing with the lack of overarching federal guidelines and the fragmented definitions among various states. Nursing has a significant and legal role in providing care for emancipated minors and a more global duty to advocate for adolescents in situations that necessitate emancipation. This article explores the emancipation process, the laws of each state that govern emancipation, the facilitators and barriers, and the role of nursing in the emancipation process. Copyright © 2012 Elsevier Inc. All rights reserved.

Near Real-Time Call Detail Record ETL Flows

NASA Astrophysics Data System (ADS)

Cochinwala, Munir; Panagos, Euthimios

Telecommunication companies face significant business challenges as they strive to reduce subscriber churn and increase average revenue per user (ARPU) by offering new services and incorporating new functionality into existing services. The increased number of service offerings and available functionality result in an ever growing volume of call detail records (CDRs). For many services (e.g., pre-paid), CDRs need to be processed and analyzed in near real-time for several reasons, including charging, on-line subscriber access to their accounts, and analytics for predicting subscriber usage and preventing fraudulent activity. In this paper, we describe the challenges associated with near real-time extract, transform, and load (ETL) of CDR data warehouse flows for supporting both the operational and business intelligence needs of telecommunication services, and we present our approach to addressing these challenges.

The role of perceptual load in inattentional blindness.

PubMed

Cartwright-Finch, Ula; Lavie, Nilli

2007-03-01

Perceptual load theory offers a resolution to the long-standing early vs. late selection debate over whether task-irrelevant stimuli are perceived, suggesting that irrelevant perception depends upon the perceptual load of task-relevant processing. However, previous evidence for this theory has relied on RTs and neuroimaging. Here we tested the effects of load on conscious perception using the "inattentional blindness" paradigm. As predicted by load theory, awareness of a task-irrelevant stimulus was significantly reduced by higher perceptual load (with increased numbers of search items, or a harder discrimination vs. detection task). These results demonstrate that conscious perception of task-irrelevant stimuli critically depends upon the level of task-relevant perceptual load rather than intentions or expectations, thus enhancing the resolution to the early vs. late selection debate offered by the perceptual load theory.

The necessary and sufficient conditions of therapeutic personality change: Reactions to Rogers' 1957 article.

PubMed

Samstag, Lisa Wallner

2007-09-01

Carl Rogers' article (see record 2007-14639-002) on the necessary and sufficient conditions for personality change has had a significant impact on the field of psychotherapy and psychotherapy research. He emphasized the client as arbiter of his or her own subjective experience and tested his hypothesized therapist-offered conditions of change using recorded sessions. This aided in demystifying the therapeutic process and led to a radical shift in the listening stance of the therapist. I briefly outline my views regarding the influence of the ideas presented in this work, describe the intellectual and cultural context of the times, and discuss a number of ways in which the therapist-offered conditions for psychological transformation are neither necessary nor sufficient. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

78 FR 53702 - User Fees for Processing Installment Agreements and Offers in Compromise

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... User Fees for Processing Installment Agreements and Offers in Compromise AGENCY: Internal Revenue... document contains proposed amendments to the regulations that provide user fees for installment agreements... agencies to prescribe regulations that establish charges for services provided by the agencies (user fees...

77 FR 18707 - USPS Package Intercept-New Product Offerings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... service that replaced the former recall of mail process. Plans were announced to implement new features.... Additionally, customers using the electronic process will have the option of adding selected extra services to... POSTAL SERVICE 39 CFR Part 111 USPS Package Intercept--New Product Offerings AGENCY: Postal...

A methodology for the comparative evaluation of alternative bioseparation technologies.

PubMed

Tran, Richard; Zhou, Yuhong; Lacki, Karol M; Titchener-Hooker, Nigel J

2008-01-01

Advances in upstream technologies and growing commercial demand have led to cell culture processes of ever larger volumes and expressing at higher product titers. This has increased the burden on downstream processing. Concerns regarding the capacity limitations of packed-bed chromatography have led process engineers to begin investigating new bioseparation techniques that may be considered as "alternatives" to chromatography, and which could potentially offer higher processing capacities but at a lower cost. With the wide range of alternatives, which are currently available, each with their own strengths and inherent limitations, coupled with the time pressures associated with process development, the challenge for process engineers is to determine which technologies are most worth investigating. This article presents a methodology based on a multiattribute decision making (MADM) analysis approach, utilizing both quantitative and qualitative data, which can be used to determine the "industrial attractiveness" of bioseparation technologies, accounting for trade-offs between their strengths and weaknesses. By including packed-bed chromatography in the analysis as a reference point, it was possible to determine the alternatives, which show the most promise for use in large-scale manufacturing processes. The results of this analysis show that although the majority of alternative techniques offer certain advantages over conventional packed-bed chromatography, their attractiveness overall means that currently none of these technologies may be considered as viable alternatives to chromatography. The methodology introduced in this study may be used to gain significant quantitative insight as to the key areas in which improvements are required for each technique, and thus may be used as a tool to aid in further technological development.

14 million hours of operational experience on phosphate ester fluids as gas turbine main bearing lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dufresne, P.E.

1998-09-01

Phosphate ester fluids have been used as a gas turbine main bearing lubricant for more than 35 years. Acid treatment systems utilizing fullers` earth and activated alumina have been used to remove acids produced during the PE fluid degradation process on an intermittent or continuous basis. Both acid adsorbing medias contribute metal soaps during the acid adsorbing process. Over time, the build-up of metal soaps significantly reduces the capability of the media to adsorb acids. The end result is escalating acid levels and fluid operating problems. The introduction of ion exchange as an acid adsorbing media has eliminated the catalyticmore » fluid degradation process, and offers phosphate ester users` extremely long fluid service life.« less

Cultivating a Cross-Cultural Disposition

DTIC Science & Technology

2007-06-15

OF ADAPTATION PROCESS ........................................................................................70 REFERENCE LIST...and the use of distance learning media echo recommendations offered by one of the article’s cited military sources, retired Major General Robert H...leaving one to his or her personal definition. Those that do offer conceptualization of culture often equate it to group level cognitive processes , an

Employee Selection Process: Integrating Employee Needs and Employer Motivators.

ERIC Educational Resources Information Center

Carroll, Brian J.

1989-01-01

Offers suggestions for managers relative to the employee selection process, focusing on the identification of a potential employee's needs and the employer's motivators that affect employee productivity. Discusses the use of a preemployment survey and offers a questionnaire that allows matching of the employee's needs with employment…

Application of Raman Spectroscopy and Univariate Modelling As a Process Analytical Technology for Cell Therapy Bioprocessing

PubMed Central

Baradez, Marc-Olivier; Biziato, Daniela; Hassan, Enas; Marshall, Damian

2018-01-01

Cell therapies offer unquestionable promises for the treatment, and in some cases even the cure, of complex diseases. As we start to see more of these therapies gaining market authorization, attention is turning to the bioprocesses used for their manufacture, in particular the challenge of gaining higher levels of process control to help regulate cell behavior, manage process variability, and deliver product of a consistent quality. Many processes already incorporate the measurement of key markers such as nutrient consumption, metabolite production, and cell concentration, but these are often performed off-line and only at set time points in the process. Having the ability to monitor these markers in real-time using in-line sensors would offer significant advantages, allowing faster decision-making and a finer level of process control. In this study, we use Raman spectroscopy as an in-line optical sensor for bioprocess monitoring of an autologous T-cell immunotherapy model produced in a stirred tank bioreactor system. Using reference datasets generated on a standard bioanalyzer, we develop chemometric models from the Raman spectra for glucose, glutamine, lactate, and ammonia. These chemometric models can accurately monitor donor-specific increases in nutrient consumption and metabolite production as the primary T-cell transition from a recovery phase and begin proliferating. Using a univariate modeling approach, we then show how changes in peak intensity within the Raman spectra can be correlated with cell concentration and viability. These models, which act as surrogate markers, can be used to monitor cell behavior including cell proliferation rates, proliferative capacity, and transition of the cells to a quiescent phenotype. Finally, using the univariate models, we also demonstrate how Raman spectroscopy can be applied for real-time monitoring. The ability to measure these key parameters using an in-line Raman optical sensor makes it possible to have immediate feedback on process performance. This could help significantly improve cell therapy bioprocessing by allowing proactive decision-making based on real-time process data. Going forward, these types of in-line sensors also open up opportunities to improve bioprocesses further through concepts such as adaptive manufacturing. PMID:29556497

Application of Raman Spectroscopy and Univariate Modelling As a Process Analytical Technology for Cell Therapy Bioprocessing.

PubMed

Baradez, Marc-Olivier; Biziato, Daniela; Hassan, Enas; Marshall, Damian

2018-01-01

Cell therapies offer unquestionable promises for the treatment, and in some cases even the cure, of complex diseases. As we start to see more of these therapies gaining market authorization, attention is turning to the bioprocesses used for their manufacture, in particular the challenge of gaining higher levels of process control to help regulate cell behavior, manage process variability, and deliver product of a consistent quality. Many processes already incorporate the measurement of key markers such as nutrient consumption, metabolite production, and cell concentration, but these are often performed off-line and only at set time points in the process. Having the ability to monitor these markers in real-time using in-line sensors would offer significant advantages, allowing faster decision-making and a finer level of process control. In this study, we use Raman spectroscopy as an in-line optical sensor for bioprocess monitoring of an autologous T-cell immunotherapy model produced in a stirred tank bioreactor system. Using reference datasets generated on a standard bioanalyzer, we develop chemometric models from the Raman spectra for glucose, glutamine, lactate, and ammonia. These chemometric models can accurately monitor donor-specific increases in nutrient consumption and metabolite production as the primary T-cell transition from a recovery phase and begin proliferating. Using a univariate modeling approach, we then show how changes in peak intensity within the Raman spectra can be correlated with cell concentration and viability. These models, which act as surrogate markers, can be used to monitor cell behavior including cell proliferation rates, proliferative capacity, and transition of the cells to a quiescent phenotype. Finally, using the univariate models, we also demonstrate how Raman spectroscopy can be applied for real-time monitoring. The ability to measure these key parameters using an in-line Raman optical sensor makes it possible to have immediate feedback on process performance. This could help significantly improve cell therapy bioprocessing by allowing proactive decision-making based on real-time process data. Going forward, these types of in-line sensors also open up opportunities to improve bioprocesses further through concepts such as adaptive manufacturing.

Hyperswitch Communication Network Computer

NASA Technical Reports Server (NTRS)

Peterson, John C.; Chow, Edward T.; Priel, Moshe; Upchurch, Edwin T.

1993-01-01

Hyperswitch Communications Network (HCN) computer is prototype multiple-processor computer being developed. Incorporates improved version of hyperswitch communication network described in "Hyperswitch Network For Hypercube Computer" (NPO-16905). Designed to support high-level software and expansion of itself. HCN computer is message-passing, multiple-instruction/multiple-data computer offering significant advantages over older single-processor and bus-based multiple-processor computers, with respect to price/performance ratio, reliability, availability, and manufacturing. Design of HCN operating-system software provides flexible computing environment accommodating both parallel and distributed processing. Also achieves balance among following competing factors; performance in processing and communications, ease of use, and tolerance of (and recovery from) faults.

Demodulation signal processing in multiphoton imaging

NASA Astrophysics Data System (ADS)

Fisher, Walter G.; Wachter, Eric A.; Piston, David W.

2002-06-01

Multiphoton laser scanning microscopy offers numerous advantages, but sensitivity can be seriously affected by contamination from ambient room light. Typically, this forces experiments to be performed in an absolutely dark room. Since mode-locked lasers are used to generate detectable signals, signal-processing can be used to avoid such problems by taking advantage of the pulsed characteristics of such lasers. Demodulation of the fluorescence signal generated at the mode-locked frequency can result in significant reduction of interference from ambient noise sources. Such demodulation can be readily adapted to existing microscopes by inserting appropriate processor circuitry between the detector and data collection system, yielding a more robust microscope.

Anaerobic gaseous biofuel production using microalgal biomass - A review.

PubMed

Wirth, Roland; Lakatos, Gergely; Böjti, Tamás; Maróti, Gergely; Bagi, Zoltán; Rákhely, Gábor; Kovács, Kornél L

2018-05-24

Most photosynthetic organisms store and convert solar energy in an aerobic process and produce biomass for various uses. Utilization of biomass for the production of renewable energy carriers employs anaerobic conditions. This review focuses on microalgal biomass and its use for biological hydrogen and methane production. Microalgae offer several advantages compared to terrestrial plants. Strategies to maintain anaerobic environment for biohydrogen production are summarized. Efficient biogas production via anaerobic digestion is significantly affected by the biomass composition, pretreatment strategies and the parameters of the digestion process. Coupled biohydrogen and biogas production increases the efficiency and sustainability of renewable energy production. Copyright © 2018. Published by Elsevier Ltd.

Gender differences in justice evaluations: Evidence from fMRI.

PubMed

Dulebohn, James H; Davison, Robert B; Lee, Seungcheol Austin; Conlon, Donald E; McNamara, Gerry; Sarinopoulos, Issidoros C

2016-02-01

Justice research examining gender differences has yielded contrasting findings. This study enlists advanced techniques in cognitive neuroscience (fMRI) to examine gender differences in brain activation patterns in response to procedural and distributive justice manipulations. We integrate social role, information processing, justice, and neuroscience literature to posit and test for gender differences in 2 neural subsystems known to be involved in the appraisal of self-relevant events. Results indicate that the relationship between justice information processing and neural activity in areas representing these subsystems is significantly influenced by gender, with greater activation for females than males during consideration of both procedural and distributive justice information. In addition, we find evidence that gender and distributive injustice interact to influence bargaining behavior, with females rejecting ultimatum game offers more frequently than males. Results also demonstrate activation in the ventromedial prefrontal cortex (vmPFC) and ventral striatum brain regions during procedural justice evaluation is associated with offer rejection in females, but not in males. Managerial implications based on the study's support for gender differences in justice perceptions are discussed. (c) 2016 APA, all rights reserved).

Enabling Future Robotic Missions with Multicore Processors

NASA Technical Reports Server (NTRS)

Powell, Wesley A.; Johnson, Michael A.; Wilmot, Jonathan; Some, Raphael; Gostelow, Kim P.; Reeves, Glenn; Doyle, Richard J.

2011-01-01

Recent commercial developments in multicore processors (e.g. Tilera, Clearspeed, HyperX) have provided an option for high performance embedded computing that rivals the performance attainable with FPGA-based reconfigurable computing architectures. Furthermore, these processors offer more straightforward and streamlined application development by allowing the use of conventional programming languages and software tools in lieu of hardware design languages such as VHDL and Verilog. With these advantages, multicore processors can significantly enhance the capabilities of future robotic space missions. This paper will discuss these benefits, along with onboard processing applications where multicore processing can offer advantages over existing or competing approaches. This paper will also discuss the key artchitecural features of current commercial multicore processors. In comparison to the current art, the features and advancements necessary for spaceflight multicore processors will be identified. These include power reduction, radiation hardening, inherent fault tolerance, and support for common spacecraft bus interfaces. Lastly, this paper will explore how multicore processors might evolve with advances in electronics technology and how avionics architectures might evolve once multicore processors are inserted into NASA robotic spacecraft.

Topology Synthesis of Structures Using Parameter Relaxation and Geometric Refinement

NASA Technical Reports Server (NTRS)

Hull, P. V.; Tinker, M. L.

2007-01-01

Typically, structural topology optimization problems undergo relaxation of certain design parameters to allow the existence of intermediate variable optimum topologies. Relaxation permits the use of a variety of gradient-based search techniques and has been shown to guarantee the existence of optimal solutions and eliminate mesh dependencies. This Technical Publication (TP) will demonstrate the application of relaxation to a control point discretization of the design workspace for the structural topology optimization process. The control point parameterization with subdivision has been offered as an alternative to the traditional method of discretized finite element design domain. The principle of relaxation demonstrates the increased utility of the control point parameterization. One of the significant results of the relaxation process offered in this TP is that direct manufacturability of the optimized design will be maintained without the need for designer intervention or translation. In addition, it will be shown that relaxation of certain parameters may extend the range of problems that can be addressed; e.g., in permitting limited out-of-plane motion to be included in a path generation problem.

Structural Integrity of an Electron Beam Melted Titanium Alloy.

PubMed

Lancaster, Robert; Davies, Gareth; Illsley, Henry; Jeffs, Spencer; Baxter, Gavin

2016-06-14

Advanced manufacturing encompasses the wide range of processes that consist of "3D printing" of metallic materials. One such method is Electron Beam Melting (EBM), a modern build technology that offers significant potential for lean manufacture and a capability to produce fully dense near-net shaped components. However, the manufacture of intricate geometries will result in variable thermal cycles and thus a transient microstructure throughout, leading to a highly textured structure. As such, successful implementation of these technologies requires a comprehensive assessment of the relationships of the key process variables, geometries, resultant microstructures and mechanical properties. The nature of this process suggests that it is often difficult to produce representative test specimens necessary to achieve a full mechanical property characterisation. Therefore, the use of small scale test techniques may be exploited, specifically the small punch (SP) test. The SP test offers a capability for sampling miniaturised test specimens from various discrete locations in a thin-walled component, allowing a full characterisation across a complex geometry. This paper provides support in working towards development and validation strategies in order for advanced manufactured components to be safely implemented into future gas turbine applications. This has been achieved by applying the SP test to a series of Ti-6Al-4V variants that have been manufactured through a variety of processing routes including EBM and investigating the structural integrity of each material and how this controls the mechanical response.

Virtual reality Stroop task for assessment of supervisory attentional processing.

PubMed

Parsons, Thomas D; Courtney, Christopher G; Dawson, Michael E

2013-01-01

The current project is a preliminary attempt at assessing the potential of a three-dimensional virtual reality Stroop task (VRST) for investigation of supervisory attentional processing. The VRST was compared with paper-and-pencil and computer automated (two-dimensional) versions of the Stroop. Psychophysiological measures were also used to assess varying levels of user arousal. The three versions of the Stroop task were conducted with a sample of 50 healthy university students, between the ages of 18 and 28 years, which included equivalent distributions of men and women from ethnically diverse populations. No significant differences were found for age, gender, or education. Results indicated that the typical Stroop effect pattern found in the Delis-Kaplan Executive Function System (D-KEFS) and Automated Neuropsychological Assessment Metrics (ANAM) occurs in the VRST; the complexity condition of the VRST offers potential for assessment of exogenous and endogenous attentional processing; the two single-item presentation formats of the Stroop are comparable; there is a psychophysiological difference in arousal between low- and high-threat zones; and while there is a learning effect present in the VRST across conditions, it is limited by the arousal conditions in the high-threat zones. Additionally, no negative side effects were associated with use of the virtual environment. We conclude that the VRST has the potential to offer a novel approach to assessment of supervisory attentional processing within an ecologically relevant environment.

Fast femtosecond laser ablation for efficient cutting of sintered alumina substrates

NASA Astrophysics Data System (ADS)

Oosterbeek, Reece N.; Ward, Thomas; Ashforth, Simon; Bodley, Owen; Rodda, Andrew E.; Simpson, M. Cather

2016-09-01

Fast, accurate cutting of technical ceramics is a significant technological challenge because of these materials' typical high mechanical strength and thermal resistance. Femtosecond pulsed lasers offer significant promise for meeting this challenge. Femtosecond pulses can machine nearly any material with small kerf and little to no collateral damage to the surrounding material. The main drawback to femtosecond laser machining of ceramics is slow processing speed. In this work we report on the improvement of femtosecond laser cutting of sintered alumina substrates through optimisation of laser processing parameters. The femtosecond laser ablation thresholds for sintered alumina were measured using the diagonal scan method. Incubation effects were found to fit a defect accumulation model, with Fth,1=6.0 J/cm2 (±0.3) and Fth,∞=2.5 J/cm2 (±0.2). The focal length and depth, laser power, number of passes, and material translation speed were optimised for ablation speed and high quality. Optimal conditions of 500 mW power, 100 mm focal length, 2000 μm/s material translation speed, with 14 passes, produced complete cutting of the alumina substrate at an overall processing speed of 143 μm/s - more than 4 times faster than the maximum reported overall processing speed previously achieved by Wang et al. [1]. This process significantly increases processing speeds of alumina substrates, thereby reducing costs, making femtosecond laser machining a more viable option for industrial users.

Self-Referent Constructs and Medical Sociology: In Search of an Integrative Framework*

PubMed Central

Kaplan, Howard B.

2010-01-01

A theoretical framework centering on four classes of self-referent constructs is offered as a device for integrating the diverse areas constituting medical sociology. Guidance by this framework sensitizes the researcher to the occurrence of parallel processes in adjacent disciplines, facilitates recognition of the etiological significance of findings from other disciplines for explaining medical sociological phenomena, and encourages transactions between sociology and medical sociology whereby each informs and is informed by the other. PMID:17583268

What drives high flow events in the Swiss Alps? Recent developments in wavelet spectral analysis and their application to hydrology

NASA Astrophysics Data System (ADS)

Schaefli, B.; Maraun, D.; Holschneider, M.

2007-12-01

Extreme hydrological events are often triggered by exceptional co-variations of the relevant hydrometeorological processes and in particular by exceptional co-oscillations at various temporal scales. Wavelet and cross wavelet spectral analysis offers promising time-scale resolved analysis methods to detect and analyze such exceptional co-oscillations. This paper presents the state-of-the-art methods of wavelet spectral analysis, discusses related subtleties, potential pitfalls and recently developed solutions to overcome them and shows how wavelet spectral analysis, if combined to a rigorous significance test, can lead to reliable new insights into hydrometeorological processes for real-world applications. The presented methods are applied to detect potentially flood triggering situations in a high Alpine catchment for which a recent re-estimation of design floods encountered significant problems simulating the observed high flows. For this case study, wavelet spectral analysis of precipitation, temperature and discharge offers a powerful tool to help detecting potentially flood producing meteorological situations and to distinguish between different types of floods with respect to the prevailing critical hydrometeorological conditions. This opens very new perspectives for the analysis of model performances focusing on the occurrence and non-occurrence of different types of high flow events. Based on the obtained results, the paper summarizes important recommendations for future applications of wavelet spectral analysis in hydrology.

Ammonia inhibition on hydrogen enriched anaerobic digestion of manure under mesophilic and thermophilic conditions.

PubMed

Wang, Han; Zhang, Yifeng; Angelidaki, Irini

2016-11-15

Capturing of carbon dioxide by hydrogen derived from excess renewable energy (e.g., wind mills) to methane in a microbially catalyzed process offers an attractive technology for biogas production and upgrading. This bioconversion process is catalyzed by hydrogenotrophic methanogens, which are known to be sensitive to ammonia. In this study, the tolerance of the biogas process under supply of hydrogen, to ammonia toxicity was studied under mesophilic and thermophilic conditions. When the initial hydrogen partial pressure was 0.5 atm, the methane yield at high ammonia load (7 g NH 4 + -N L -1 ) was 41.0% and 22.3% lower than that at low ammonia load (1 g NH 4 + -N L -1 ) in mesophilic and thermophilic condition, respectively. Meanwhile no significant effect on the biogas composition was observed. Moreover, we found that hydrogentrophic methanogens were more tolerant to the ammonia toxicity than acetoclastic methanogens in the hydrogen enriched biogas production and upgrading processes. The highest methane production yield was achieved under 0.5 atm hydrogen partial pressure in batch reactors at all the tested ammonia levels. Furthermore, the thermophilic methanogens at 0.5 atm of hydrogen partial pressure were more tolerant to high ammonia levels (≥5 g NH 4 + -N L -1 ), compared with mesophilic methanogens. The present study offers insight in developing resistant hydrogen enriched biogas production and upgrading processes treating ammonia-rich waste streams. Copyright © 2016 Elsevier Ltd. All rights reserved.

Academic consumer researchers: a bridge between consumers and researchers.

PubMed

Griffiths, Kathleen M; Jorm, Anthony F; Christensen, Helen

2004-04-01

To describe the contributions that consumers, and academic consumer researchers in particular, can make to mental health research. A literature survey and a systematic consideration of the potential advantages of consumer and academic consumer researcher involvement in health research. Consumer researchers may contribute to better health outcomes, but there are significant barriers to their participation in the research process. To date, discussion has focused on the role of nonacademic consumers in the health research process. There has been little recognition of the particular contributions that consumers with formal academic qualifications and research experience can offer. Academic consumer researchers (ACRs) offer many of the advantages associated with lay consumer participation, as well as some unique advantages. These advantages include acceptance by other researchers as equal partners in the research process; skills in research; access to research funding; training in disseminating research findings within the scientific community; potential to influence research funding and research policy; capacity to influence the research culture; and potential to facilitate the involvement of lay consumers in the research process. In recognition of the value of a critical mass of ACRs in mental health, a new ACR unit (the Depression and Anxiety Consumer Research Unit [CRU]) has been established at the Centre for Mental Health Research at the Australian National University. Academic consumer researchers have the potential to increase the relevance of mental health research to consumers, to bridge the gap between the academic and consumer communities and to contribute to the process of destigmatizing mental disorders.

Exploring the Notion of Context in Medical Data.

PubMed

Mylonas, Phivos

2017-01-01

Scientific and technological knowledge and skills are becoming crucial for most data analysis activities. Two rather distinct, but at the same time collaborating, domains are the ones of computer science and medicine; the former offers significant aid towards a more efficient understanding of the latter's research trends. Still, the process of meaningfully analyzing and understanding medical information and data is a tedious one, bound to several challenges. One of them is the efficient utilization of contextual information in the process leading to optimized, context-aware data analysis results. Nowadays, researchers are provided with tools and opportunities to analytically study medical data, but at the same time significant and rather complex computational challenges are yet to be tackled, among others due to the humanistic nature and increased rate of new content and information production imposed by related hardware and applications. So, the ultimate goal of this position paper is to provide interested parties an overview of major contextual information types to be identified within the medical data processing framework.

Information processing bias and pharmacotherapy outcome in older adults with generalized anxiety disorder.

PubMed

Steiner, Amanda R W; Petkus, Andrew J; Nguyen, Hoang; Wetherell, Julie Loebach

2013-08-01

Information processing bias was evaluated in a sample of 25 older adults with generalized anxiety disorder (GAD) over the course of 12 weeks of escitalopram pharmacotherapy. Using the CANTAB Affective Go/No Go test, treatment response (as measured by the Hamilton Anxiety Rating Scale, Penn State Worry Questionnaire, and Generalized Anxiety Disorder Severity Scale) was predicted from a bias score (i.e., difference score between response latencies for negative and positive words) using mixed-models regression. A more positive bias score across time predicted better response to treatment. Faster responses to positive words relative to negative words were associated with greater symptomatic improvement over time as reflected by scores on the GADSS. There was a trend toward significance for PSWQ scores and no significant effects related to HAMA outcomes. These preliminary findings offer further insights into the role of biased cognitive processing of emotional material in the manifestation of late-life anxiety symptoms. Published by Elsevier Ltd.

Do we care about the powerless third? An ERP study of the three-person ultimatum game

PubMed Central

Alexopoulos, Johanna; Pfabigan, Daniela M.; Lamm, Claus; Bauer, Herbert; Fischmeister, Florian Ph. S.

2012-01-01

Recent years have provided increasing insights into the factors affecting economic decision-making. Little is known about how these factors influence decisions that also bear consequences for other people. We examined whether decisions that also affected a third, passive player modulate the behavioral and neural responses to monetary offers in a modified version of the three-person ultimatum game. We aimed to elucidate to what extent social preferences affect early neuronal processing when subjects were evaluating offers that were fair or unfair to themselves, to the third player, or to both. As an event-related potential (ERP) index for early evaluation processes in economic decision-making, we recorded the medial frontal negativity (MFN) component in response to such offers. Unfair offers were rejected more often than equitable ones, in particular when negatively affecting the subject. While the MFN amplitude was higher following unfair as compared to fair offers to the subject, MFN amplitude was not modulated by the shares assigned to the third, passive player. Furthermore, rejection rates and MFN amplitudes following fair offers were positively correlated, as subjects showing lower MFN amplitudes following fair offers tended to reject unfair offers more often—but only if those offers negatively affected their own payoff. Altogether, the rejection behavior suggests that humans mainly care about a powerless third when they are confronted with inequality as well. The correlation between rejection rates and the MFN amplitude supports the notion that this ERP component is also modulated by positive events and highlights how our expectations concerning other humans' behavior guide our own decisions. However, social preferences like inequality aversion and concern for the well-being of others are not reflected in this early neuronal response, but seem to result from later, deliberate and higher-order cognitive processes. PMID:22470328

Do we care about the powerless third? An ERP study of the three-person ultimatum game.

PubMed

Alexopoulos, Johanna; Pfabigan, Daniela M; Lamm, Claus; Bauer, Herbert; Fischmeister, Florian Ph S

2012-01-01

Recent years have provided increasing insights into the factors affecting economic decision-making. Little is known about how these factors influence decisions that also bear consequences for other people. We examined whether decisions that also affected a third, passive player modulate the behavioral and neural responses to monetary offers in a modified version of the three-person ultimatum game. We aimed to elucidate to what extent social preferences affect early neuronal processing when subjects were evaluating offers that were fair or unfair to themselves, to the third player, or to both. As an event-related potential (ERP) index for early evaluation processes in economic decision-making, we recorded the medial frontal negativity (MFN) component in response to such offers. Unfair offers were rejected more often than equitable ones, in particular when negatively affecting the subject. While the MFN amplitude was higher following unfair as compared to fair offers to the subject, MFN amplitude was not modulated by the shares assigned to the third, passive player. Furthermore, rejection rates and MFN amplitudes following fair offers were positively correlated, as subjects showing lower MFN amplitudes following fair offers tended to reject unfair offers more often-but only if those offers negatively affected their own payoff. Altogether, the rejection behavior suggests that humans mainly care about a powerless third when they are confronted with inequality as well. The correlation between rejection rates and the MFN amplitude supports the notion that this ERP component is also modulated by positive events and highlights how our expectations concerning other humans' behavior guide our own decisions. However, social preferences like inequality aversion and concern for the well-being of others are not reflected in this early neuronal response, but seem to result from later, deliberate and higher-order cognitive processes.

Markov Processes in Image Processing

NASA Astrophysics Data System (ADS)

Petrov, E. P.; Kharina, N. L.

2018-05-01

Digital images are used as an information carrier in different sciences and technologies. The aspiration to increase the number of bits in the image pixels for the purpose of obtaining more information is observed. In the paper, some methods of compression and contour detection on the basis of two-dimensional Markov chain are offered. Increasing the number of bits on the image pixels will allow one to allocate fine object details more precisely, but it significantly complicates image processing. The methods of image processing do not concede by the efficiency to well-known analogues, but surpass them in processing speed. An image is separated into binary images, and processing is carried out in parallel with each without an increase in speed, when increasing the number of bits on the image pixels. One more advantage of methods is the low consumption of energy resources. Only logical procedures are used and there are no computing operations. The methods can be useful in processing images of any class and assignment in processing systems with a limited time and energy resources.

Direct and comprehensive analysis of dyes based on integrated molecular and structural information via laser desorption laser postionization mass spectrometry.

PubMed

Liu, Rong; Yin, Zhibin; Leng, Yixin; Hang, Wei; Huang, Benli

2018-01-01

Laser desorption laser postionization time-of-flight mass spectrometry (LDPI-TOFMS) was employed for direct analysis and determination of typical basic dyes. It was also used for the analysis and comprehensive understanding of complex materials such as blue ballpoint pen inks. Simultaneous emergences of fragmental and molecular information largely simplify and facilitate unambiguous identification of dyes via variable energy of 266nm postionization laser. More specifically, by optimizing postionization laser energy with the same energy of desorption laser, the structurally significant results show definite differences in the fragmentation patterns, which offer opportunities for discrimination of isomeric species with identical molecular weight. Moreover, relatively high spectra resolution can be acquired without the expense of sensitivity. In contrast to laser desorption/ionization mass spectrometry (LDI-MS), LDPI-MS simultaneously offers valuable molecular information about dyes in traces, solvents and additives about inks, thereby offering direct determination and comprehensive understanding of blue ballpoint inks and giving a high level of confidence to discriminate the complicated evidentiary samples. In addition, direct analysis of the inks not only allows the avoidance of the tedious sample preparation processes, significantly shortening the overall analysis time and improving throughput, but allows minimized sample consumption which is important for rare and precious samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluating two process scale chromatography column header designs using CFD.

PubMed

Johnson, Chris; Natarajan, Venkatesh; Antoniou, Chris

2014-01-01

Chromatography is an indispensable unit operation in the downstream processing of biomolecules. Scaling of chromatographic operations typically involves a significant increase in the column diameter. At this scale, the flow distribution within a packed bed could be severely affected by the distributor design in process scale columns. Different vendors offer process scale columns with varying design features. The effect of these design features on the flow distribution in packed beds and the resultant effect on column efficiency and cleanability needs to be properly understood in order to prevent unpleasant surprises on scale-up. Computational Fluid Dynamics (CFD) provides a cost-effective means to explore the effect of various distributor designs on process scale performance. In this work, we present a CFD tool that was developed and validated against experimental dye traces and tracer injections. Subsequently, the tool was employed to compare and contrast two commercially available header designs. © 2014 American Institute of Chemical Engineers.

Individual and group cognitive processing therapy: Effectiveness across two veterans affairs posttraumatic stress disorder treatment clinics.

PubMed

Lamp, Kristen E; Avallone, Kimberly M; Maieritsch, Kelly P; Buchholz, Katherine R; Rauch, Sheila A M

2018-05-14

In accordance with Veterans Affairs (VA) policy, VA posttraumatic stress disorder (PTSD) clinics offer evidence-based treatments including cognitive processing therapy (CPT). To facilitate access to care, CPT is offered in both group and individual formats in many VA PTSD clinics. Group and individual delivery of CPT have been directly compared in active duty samples, but these findings have not been extended to VA populations. The present article directly compares the effectiveness of group and individual CPT with a written trauma account (CPT+A) across two VA PTSD clinics. Veterans (N = 465) completed initial evaluations and enrolled in either group CPT+A (N = 146) or individual CPT+A (N = 319). Self-report measures of PTSD and depression symptoms were collected at pre-, mid-, and posttreatment; combined across treatment sites; and analyzed using hierarchical linear modeling. PTSD and depression symptoms reduced significantly over the course of group and individual CPT+A. Medium treatment effects were found for group CPT+A (d = .66 for PTSD, d = .68 for depression), and large treatment effects were found for individual CPT+A (d = .96 for PTSD, d = .79 for depression). Individual CPT+A led to significantly greater PTSD and depression symptom reduction than group CPT+A, indicating that in VA outpatient PTSD clinic settings, individual CPT+A may be a more effective approach than group CPT-A. In addition, PTSD symptoms reduced significantly more for Caucasian veterans than for African American veterans during CPT+A, indicating the importance of providing culturally competent trauma-focused care. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Training for Template Creation: A Performance Improvement Method

ERIC Educational Resources Information Center

Lyons, Paul

2008-01-01

Purpose: There are three purposes to this article: first, to offer a training approach to employee learning and performance improvement that makes use of a step-by-step process of skill/knowledge creation. The process offers follow-up opportunities for skill maintenance and improvement; second, to explain the conceptual bases of the approach; and…

The importance of marketing in nurse education.

PubMed

Webster, R

There can be little doubt that changes in the National Health Service (NHS) heralded by the 1989 Government White Paper, Working for Patients, have significant implications for nurse education. Not least will be the need for Colleges and Schools of Nursing to present a high profile in terms of the services they offer. This paper explores the concept of marketing and its increasing importance to nurse education. It examines Giles' three propositions in relation to marketing, and suggests that these may be applied successfully to organisations providing a service, as well as those producing material goods. It looks at how and why marketing is necessary to nurse education, and suggests that marketing is an essential tool in assisting the School to achieve its objectives. Marketing strategies are discussed in detail, looking first at methods of research, then at the processes used to sell the courses being offered. These include the techniques of developing the offering, marketing the offering, facilitation, valuation and finally, promotional communication. The paper concludes by summarising the reasons why marketing techniques will be essential to the future success of nurse education, at a time when it is so vital to ensure that a well qualified nursing workforce is prepared to meet the challenges of the future.

Vortex combustor for low NOX emissions when burning lean premixed high hydrogen content fuel

DOEpatents

Steele, Robert C; Edmonds, Ryan G; Williams, Joseph T; Baldwin, Stephen P

2012-11-20

A trapped vortex combustor. The trapped vortex combustor is configured for receiving a lean premixed gaseous fuel and oxidant stream, where the fuel includes hydrogen gas. The trapped vortex combustor is configured to receive the lean premixed fuel and oxidant stream at a velocity which significantly exceeds combustion flame speed in a selected lean premixed fuel and oxidant mixture. The combustor is configured to operate at relatively high bulk fluid velocities while maintaining stable combustion, and low NOx emissions. The combustor is useful in gas turbines in a process of burning synfuels, as it offers the opportunity to avoid use of diluent gas to reduce combustion temperatures. The combustor also offers the possibility of avoiding the use of selected catalytic reaction units for removal of oxides of nitrogen from combustion gases exiting a gas turbine.

Vortex combustor for low NOx emissions when burning lean premixed high hydrogen content fuel

DOEpatents

Steele, Robert C [Woodinville, WA; Edmonds, Ryan G [Renton, WA; Williams, Joseph T [Kirkland, WA; Baldwin, Stephen P [Winchester, MA

2009-10-20

A trapped vortex combustor. The trapped vortex combustor is configured for receiving a lean premixed gaseous fuel and oxidant stream, where the fuel includes hydrogen gas. The trapped vortex combustor is configured to receive the lean premixed fuel and oxidant stream at a velocity which significantly exceeds combustion flame speed in a selected lean premixed fuel and oxidant mixture. The combustor is configured to operate at relatively high bulk fluid velocities while maintaining stable combustion, and low NOx emissions. The combustor is useful in gas turbines in a process of burning synfuels, as it offers the opportunity to avoid use of diluent gas to reduce combustion temperatures. The combustor also offers the possibility of avoiding the use of selected catalytic reaction units for removal of oxides of nitrogen from combustion gases exiting a gas turbine.

Quantitative assessment of anthrax vaccine immunogenicity using the dried blood spot matrix.

PubMed

Schiffer, Jarad M; Maniatis, Panagiotis; Garza, Ilana; Steward-Clark, Evelene; Korman, Lawrence T; Pittman, Phillip R; Mei, Joanne V; Quinn, Conrad P

2013-03-01

The collection, processing and transportation to a testing laboratory of large numbers of clinical samples during an emergency response situation present significant cost and logistical issues. Blood and serum are common clinical samples for diagnosis of disease. Serum preparation requires significant on-site equipment and facilities for immediate processing and cold storage, and significant costs for cold-chain transport to testing facilities. The dried blood spot (DBS) matrix offers an alternative to serum for rapid and efficient sample collection with fewer on-site equipment requirements and considerably lower storage and transport costs. We have developed and validated assay methods for using DBS in the quantitative anti-protective antigen IgG enzyme-linked immunosorbent assay (ELISA), one of the primary assays for assessing immunogenicity of anthrax vaccine and for confirmatory diagnosis of Bacillus anthracis infection in humans. We have also developed and validated high-throughput data analysis software to facilitate data handling for large clinical trials and emergency response. Published by Elsevier Ltd.

Use of ultrasonic energy in the enzymatic treatment of cotton fabric

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yachmenev, V.G.; Blanchard, E.J.; Lambert, A.H.

Application of enzymes in the textile industry is becoming increasingly popular because of mild processing conditions and the capability for replacing harsh organic/inorganic chemicals. The combination of ultrasound with conventional enzymatic treatment of cotton offers significant advantages such as less consumption of expensive enzymes, shorter processing time, less fiber damage, and better uniformity of enzymatic treatment. Laboratory research has shown that introduction of ultrasonic energy during enzymatic treatment resulted in significant improvement in the performance of cellulase enzyme (CELLUSOFT L). It was established that ultrasound does not inactivate the complex structure of the enzyme molecules and weight loss of cottonmore » fabric sonicated and treated with cellulase enzyme increased up to 25--35%. The experimental data indicate that the maximum benefit provided by sonification occurs at relatively low enzyme concentrations. Ultrasonic energy significantly intensified the enzymatic treatment of the cotton fabrics but did not contribute to a decrease in tensile strength of the cotton textiles.« less

A Case of Error Disclosure: A Communication Privacy Management Analysis

PubMed Central

Petronio, Sandra; Helft, Paul R.; Child, Jeffrey T.

2013-01-01

To better understand the process of disclosing medical errors to patients, this research offers a case analysis using Petronios’s theoretical frame of Communication Privacy Management (CPM). Given the resistance clinicians often feel about error disclosure, insights into the way choices are made by the clinicians in telling patients about the mistake has the potential to address reasons for resistance. Applying the evidenced-based CPM theory, developed over the last 35 years and dedicated to studying disclosure phenomenon, to disclosing medical mistakes potentially has the ability to reshape thinking about the error disclosure process. Using a composite case representing a surgical mistake, analysis based on CPM theory is offered to gain insights into conversational routines and disclosure management choices of revealing a medical error. The results of this analysis show that an underlying assumption of health information ownership by the patient and family can be at odds with the way the clinician tends to control disclosure about the error. In addition, the case analysis illustrates that there are embedded patterns of disclosure that emerge out of conversations the clinician has with the patient and the patient’s family members. These patterns unfold privacy management decisions on the part of the clinician that impact how the patient is told about the error and the way that patients interpret the meaning of the disclosure. These findings suggest the need for a better understanding of how patients manage their private health information in relationship to their expectations for the way they see the clinician caring for or controlling their health information about errors. Significance for public health Much of the mission central to public health sits squarely on the ability to communicate effectively. This case analysis offers an in-depth assessment of how error disclosure is complicated by misunderstandings, assuming ownership and control over information, unwittingly following conversational scripts that convey misleading messages, and the difficulty in regulating privacy boundaries in the stressful circumstances that occur with error disclosures. As a consequence, the potential contribution to public health is the ability to more clearly see the significance of the disclosure process that has implications for many public health issues. PMID:25170501

Synthetic Foveal Imaging Technology

NASA Technical Reports Server (NTRS)

Hoenk, Michael; Monacos, Steve; Nikzad, Shouleh

2009-01-01

Synthetic Foveal imaging Technology (SyFT) is an emerging discipline of image capture and image-data processing that offers the prospect of greatly increased capabilities for real-time processing of large, high-resolution images (including mosaic images) for such purposes as automated recognition and tracking of moving objects of interest. SyFT offers a solution to the image-data processing problem arising from the proposed development of gigapixel mosaic focal-plane image-detector assemblies for very wide field-of-view imaging with high resolution for detecting and tracking sparse objects or events within narrow subfields of view. In order to identify and track the objects or events without the means of dynamic adaptation to be afforded by SyFT, it would be necessary to post-process data from an image-data space consisting of terabytes of data. Such post-processing would be time-consuming and, as a consequence, could result in missing significant events that could not be observed at all due to the time evolution of such events or could not be observed at required levels of fidelity without such real-time adaptations as adjusting focal-plane operating conditions or aiming of the focal plane in different directions to track such events. The basic concept of foveal imaging is straightforward: In imitation of a natural eye, a foveal-vision image sensor is designed to offer higher resolution in a small region of interest (ROI) within its field of view. Foveal vision reduces the amount of unwanted information that must be transferred from the image sensor to external image-data-processing circuitry. The aforementioned basic concept is not new in itself: indeed, image sensors based on these concepts have been described in several previous NASA Tech Briefs articles. Active-pixel integrated-circuit image sensors that can be programmed in real time to effect foveal artificial vision on demand are one such example. What is new in SyFT is a synergistic combination of recent advances in foveal imaging, computing, and related fields, along with a generalization of the basic foveal-vision concept to admit a synthetic fovea that is not restricted to one contiguous region of an image.

Fuel from Tobacco and Arundo Donax: Synthetic Crop for Direct Drop-in Biofuel Production through Re-routing the Photorespiration Intermediates and Engineering Terpenoid Pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

PETRO Project: Biofuels offer renewable alternatives to petroleum-based fuels that reduce net greenhouse gas emissions to nearly zero. However, traditional biofuels production is limited not only by the small amount of solar energy that plants convert through photosynthesis into biological materials, but also by inefficient processes for converting these biological materials into fuels. Farm-ready, non-food crops are needed that produce fuels or fuel-like precursors at significantly lower costs with significantly higher productivity. To make biofuels cost-competitive with petroleum-based fuels, biofuels production costs must be cut in half.

Towards ambient temperature-stable vaccines: the identification of thermally stabilizing liquid formulations for measles virus using an innovative high-throughput infectivity assay.

PubMed

Schlehuber, Lisa D; McFadyen, Iain J; Shu, Yu; Carignan, James; Duprex, W Paul; Forsyth, William R; Ho, Jason H; Kitsos, Christine M; Lee, George Y; Levinson, Douglas A; Lucier, Sarah C; Moore, Christopher B; Nguyen, Niem T; Ramos, Josephine; Weinstock, B André; Zhang, Junhong; Monagle, Julie A; Gardner, Colin R; Alvarez, Juan C

2011-07-12

As a result of thermal instability, some live attenuated viral (LAV) vaccines lose substantial potency from the time of manufacture to the point of administration. Developing regions lacking extensive, reliable refrigeration ("cold-chain") infrastructure are particularly vulnerable to vaccine failure, which in turn increases the burden of disease. Development of a robust, infectivity-based high throughput screening process for identifying thermostable vaccine formulations offers significant promise for vaccine development across a wide variety of LAV products. Here we describe a system that incorporates thermal stability screening into formulation design using heat labile measles virus as a prototype. The screening of >11,000 unique formulations resulted in the identification of liquid formulations with marked improvement over those used in commercial monovalent measles vaccines, with <1.0 log loss of activity after incubation for 8h at 40°C. The approach was shown to be transferable to a second unrelated virus, and therefore offers significant promise towards the optimization of formulation for LAV vaccine products. Copyright © 2011 Elsevier Ltd. All rights reserved.

Acellular Nerve Allografts in Peripheral Nerve Regeneration: A Comparative Study

PubMed Central

Moore, Amy M.; MacEwan, Matthew; Santosa, Katherine B.; Chenard, Kristofer E.; Ray, Wilson Z.; Hunter, Daniel A.; Mackinnon, Susan E.; Johnson, Philip J.

2011-01-01

Background Processed nerve allografts offer a promising alternative to nerve autografts in the surgical management of peripheral nerve injuries where short deficits exist. Methods Three established models of acellular nerve allograft (cold-preserved, detergent-processed, and AxoGen® -processed nerve allografts) were compared to nerve isografts and silicone nerve guidance conduits in a 14 mm rat sciatic nerve defect. Results All acellular nerve grafts were superior to silicone nerve conduits in support of nerve regeneration. Detergent-processed allografts were similar to isografts at 6 weeks post-operatively, while AxoGen®-processed and cold-preserved allografts supported significantly fewer regenerating nerve fibers. Measurement of muscle force confirmed that detergent-processed allografts promoted isograft-equivalent levels of motor recovery 16 weeks post-operatively. All acellular allografts promoted greater amounts of motor recovery compared to silicone conduits. Conclusions These findings provide evidence that differential processing for removal of cellular constituents in preparing acellular nerve allografts affects recovery in vivo. PMID:21660979

Factors influencing public risk-benefit considerations of nanotechnology: Assessing the effects of mass media, interpersonal communication, and elaborative processing.

PubMed

Ho, Shirley S; Scheufele, Dietram A; Corley, Elizabeth A

2013-07-01

This study examines the influence of mass media, interpersonal communication, and elaborative processing on public perception of benefits and risks of nanotechnology, based on a large-scale nationally representative telephone survey of U.S. adult citizens. Results indicate that cognitive processes in the form of news elaboration had a significant positive main effect on benefits outweigh risks perception. The influences of attention to science in newspapers, attention to science news on television, and interpersonal communication about science on public perception of benefits outweigh risks were moderated by elaborative processing, after controlling for socio-demographic variables, religious beliefs, trust in scientists, and scientific knowledge. The findings highlight the importance of elaborative processing when it comes to understanding how the mass media differentially influence public benefits outweigh risks perception of emerging technologies. Specifically, high elaborative processing emphasizes higher levels of perceived benefits outweigh risks than low elaborative processing. This study explores explanations for this phenomenon and offers implications for future research and policy.

[Words before actions- the significance of counselling in the Praena-Test era].

PubMed

Tschudin, Sibil

2014-04-23

Due to new offers in prenatal diagnostics pregnant women are forced to make choices. In Switzerland physicians are obliged to inform previous to prenatal tests and to obtain informed consent. Considering the complexity of this information and the consequences of a positive result, counselling is challenging, especially in an intercultural context. A questionnaire-based study compared information processing, test interpretation and emotional response of pregnant women from Switzerland and adjacent countries with Turkish women. Knowledge of the latter was significantly lower and they found counselling more unsettling, but their acceptance of prenatal tests was significantly higher. An empathetic approach and the right words are decisive, and counselling will even gain importance when considering the increase in options patients are confronted with.

The impact of preparatory activities on medical school selection outcomes: a cross-sectional survey of applicants to the university of Adelaide medical school in 2007

PubMed Central

2013-01-01

Background Selection into medical school is highly competitive with more applicants than places. Little is known about the preparation that applicants undertake for this high stakes process. The study aims to determine what preparatory activities applicants undertake and what difficulties they encounter for each stage of the application process to medical school and in particular what impact these have on the outcome. Methods A cross-sectional survey of 1097 applicants who applied for a place in the University of Adelaide Medical School in 2007 and participated in the UMAT (Undergraduate Medicine and Health Sciences Admission Test) and oral assessment components of the selection process. The main outcome measures were an offer of an interview and offer of a place in the medical school and were analysed using logistic regression. Results The odds of a successful outcome increased with each additional preparatory activity undertaken for the UMAT (odds ratio 1.22, 95% confidence interval 1.11 to 1.33; P < 0.001) and the oral assessment (1.36, 1.19 to 1.55; P < 0.001) stage of selection. The UMAT preparatory activities associated with the offer of an interview were attendance of a training course by a private organisation (1.75, 1.35 to 2.27: P < 0.001), use of online services of a private organisation (1.58, 1.23 to 2.04; P < 0.001), and familiarising oneself with the process (1.52, 1.15 to 2.00; p = 0.021). The oral assessment activities associated with an offer of a place included refining and learning a personal resume (9.73, 2.97 to 31.88; P < 0.001) and learning about the course structure (2.05, 1.29 to 3.26; P = 0.022). For the UMAT, applicants who found difficulties with learning for this type of test (0.47, 0.35 to 0.63: P < 0.001), with the timing of UMAT in terms of school exams (0.48, 0.5 to 0.66; P < 0.001) and with the inability to convey personal skills with the UMAT (0.67, 0.52 to 0.86; P = 0.026) were significantly less likely to be offered an interview. Conclusions Medical schools make an enormous effort to undertake a selection process that is fair and equitable and which selects students most appropriate for medical school and the course they provide. Our results indicate that performance in the selection processes can be improved by training. However, if these preparatory activities may be limited to those who can access them, the playing field is not even and increasing equity of access to medical schools will not be achieved. PMID:24289521

Engineered Polymer Composites Through Electrospun Nanofiber Coating of Fiber Tows

NASA Technical Reports Server (NTRS)

Kohlman, Lee W.; Bakis, Charles; Williams, Tiffany S.; Johnston, James C.; Kuczmarski, Maria A.; Roberts, Gary D.

2014-01-01

Composite materials offer significant weight savings in many aerospace applications. The toughness of the interface of fibers crossing at different angles often determines failure of composite components. A method for toughening the interface in fabric and filament wound components using directly electrospun thermoplastic nanofiber on carbon fiber tow is presented. The method was first demonstrated with limited trials, and then was scaled up to a continuous lab scale process. Filament wound tubes were fabricated and tested using unmodified baseline towpreg material and nanofiber coated towpreg.

Modeling and Simulation of the Direct Methanol Fuel Cell

NASA Technical Reports Server (NTRS)

Wohr, M.; Narayanan, S. R.; Halpert, G.

1996-01-01

From intro.: The direct methanol liquid feed fuel cell uses aqueous solutions of methanol as fuel and oxygen or air as the oxidant and uses an ionically conducting polymer membrane such as Nafion(sup r)117 and the electrolyte. This type of direct oxidation cell is fuel versatile and offers significant advantages in terms of simplicity of design and operation...The present study focuses on the results of a phenomenological model based on current understanding of the various processed operating in these cells.

Beyond Fourier

NASA Astrophysics Data System (ADS)

Hoch, Jeffrey C.

2017-10-01

Non-Fourier methods of spectrum analysis are gaining traction in NMR spectroscopy, driven by their utility for processing nonuniformly sampled data. These methods afford new opportunities for optimizing experiment time, resolution, and sensitivity of multidimensional NMR experiments, but they also pose significant challenges not encountered with the discrete Fourier transform. A brief history of non-Fourier methods in NMR serves to place different approaches in context. Non-Fourier methods reflect broader trends in the growing importance of computation in NMR, and offer insights for future software development.

Plasma filtering techniques for nuclear waste remediation

DOE PAGES

Gueroult, Renaud; Hobbs, David T.; Fisch, Nathaniel J.

2015-04-24

Nuclear waste cleanup is challenged by the handling of feed stocks that are both unknown and complex. Plasma filtering, operating on dissociated elements, offers advantages over chemical methods in processing such wastes. The costs incurred by plasma mass filtering for nuclear waste pretreatment, before ultimate disposal, are similar to those for chemical pretreatment. However, significant savings might be achieved in minimizing the waste mass. As a result, this advantage may be realized over a large range of chemical waste compositions, thereby addressing the heterogeneity of legacy nuclear waste.

Framing the Socialisation Process of the DBA Candidate: What Can Universities Offer and What Should Candidates Bring?

ERIC Educational Resources Information Center

Pervan, Simon; Blackman, Deborah; Sloan, Terry; Wallace, Michelle; Vocino, Andrea; Byrne, Cathy

2016-01-01

In Australia, the Doctorate of Business Administration (DBA) remains a popular program but considerable anguish persists within the university sector over just what it is offering students. In this article, we use the process of postgraduate socialisation to understand how candidates, supervisors and administrators navigate pathways to successful…

Dynamic adjustments of cognitive control during economic decision making.

PubMed

Soutschek, Alexander; Schubert, Torsten

2014-10-01

Decision making in the Ultimatum game requires the resolution of conflicts between economic self-interest and fairness intuitions. Since cognitive control processes play an important role in conflict resolution, the present study examined how control processes that are triggered by conflicts between fairness and self-interest in unfair offers affect subsequent decisions in the Ultimatum game. Our results revealed that more unfair offers were accepted following previously unfair, compared to previously fair offers. Interestingly, the magnitude of this conflict adaptation effect correlated with the individual subjects' focus on economic self-interest. We concluded that conflicts between fairness and self-interest trigger cognitive control processes, which reinforce the focus on the current task goal. Copyright © 2014 Elsevier B.V. All rights reserved.

Assuring Quality in Online Offerings: Insights from a University's Faculty

ERIC Educational Resources Information Center

Budden, Connie B.; Budden, Heather L.; Hall, Michelle; Longman, Debbie G.

2015-01-01

As the growth of online education offered by universities accelerates and spreads, universities are increasingly grappling with concerns related to widespread availability and the maintenance of academic quality. The "Quality Matters at Southeastern" Program fosters quality through a peer review process and offers a certification process…

High-testosterone men reject low ultimatum game offers.

PubMed

Burnham, Terence C

2007-09-22

The ultimatum game is a simple negotiation with the interesting property that people frequently reject offers of 'free' money. These rejections contradict the standard view of economic rationality. This divergence between economic theory and human behaviour is important and has no broadly accepted cause. This study examines the relationship between ultimatum game rejections and testosterone. In a variety of species, testosterone is associated with male seeking dominance. If low ultimatum game offers are interpreted as challenges, then high-testosterone men may be more likely to reject such offers. In this experiment, men who reject low offers ($5 out of $40) have significantly higher testosterone levels than those who accept. In addition, high testosterone levels are associated with higher ultimatum game offers, but this second finding is not statistically significant.

Miniature hybrid microwave IC's using a novel thin-film technology

NASA Astrophysics Data System (ADS)

Eda, Kazuo; Miwa, Tetsuji; Taguchi, Yutaka; Uwano, Tomoki

1990-12-01

A novel thin-film technology for miniature hybrid microwave ICs is presented. All passive components, such as resistors and capacitors, are fully integrated on ordinary alumina ceramic substrates using the thin-film technology with very high yield. The numbers of parts and wiring processes were significantly reduced. This technology was applied to the fabrication of Ku-band solid-state power amplifiers. This thin-film technology offers the following advantages: (1) a very high yield fabrication process of thin-film capacitor having excellent electrical characteristics in the gigahertz range (Q = 230 at 12 GHz) and reliability: (2) two kinds of thin-film resistors having different temperature coefficients of resistivity and a lift-off process to integrate them with thin-film capacitors; and (3) a matching method using the thin-film capacitor.

Comparing the temporal dynamics of thematic and taxonomic processing using event-related potentials.

PubMed

Savic, Olivera; Savic, Andrej M; Kovic, Vanja

2017-01-01

We report the results of a study comparing the temporal dynamics of thematic and taxonomic knowledge activation in a picture-word priming paradigm using event-related potentials. Although we found no behavioral differences between thematic and taxonomic processing, ERP data revealed distinct patterns of N400 and P600 amplitude modulation for thematic and taxonomic priming. Thematically related target stimuli elicited less negativity than taxonomic targets between 280-460 ms after stimulus onset, suggesting easier semantic processing of thematic than taxonomic relationships. Moreover, P600 mean amplitude was significantly increased for taxonomic targets between 520-600 ms, consistent with a greater need for stimulus reevaluation in that condition. These results offer novel evidence in favor of a dissociation between thematic and taxonomic thinking in the early phases of conceptual evaluation.

Voice emotion perception and production in cochlear implant users.

PubMed

Jiam, N T; Caldwell, M; Deroche, M L; Chatterjee, M; Limb, C J

2017-09-01

Voice emotion is a fundamental component of human social interaction and social development. Unfortunately, cochlear implant users are often forced to interface with highly degraded prosodic cues as a result of device constraints in extraction, processing, and transmission. As such, individuals with cochlear implants frequently demonstrate significant difficulty in recognizing voice emotions in comparison to their normal hearing counterparts. Cochlear implant-mediated perception and production of voice emotion is an important but relatively understudied area of research. However, a rich understanding of the voice emotion auditory processing offers opportunities to improve upon CI biomedical design and to develop training programs benefiting CI performance. In this review, we will address the issues, current literature, and future directions for improved voice emotion processing in cochlear implant users. Copyright © 2017 Elsevier B.V. All rights reserved.

Integrated continuous processing of proteins expressed as inclusion bodies: GCSF as a case study.

PubMed

Kateja, Nikhil; Agarwal, Harshit; Hebbi, Vishwanath; Rathore, Anurag S

2017-07-01

Affordability of biopharmaceuticals continues to be a challenge, particularly in developing economies. This has fuelled advancements in manufacturing that can offer higher productivity and better economics without sacrificing product quality in the form of an integrated continuous manufacturing platform. While platform processes for monoclonal antibodies have existed for more than a decade, development of an integrated continuous manufacturing process for bacterial proteins has received relatively scant attention. In this study, we propose an end-to-end integrated continuous downstream process (from inclusion bodies to unformulated drug substance) for a therapeutic protein expressed in Escherichia coli as inclusion body. The final process consisted of a continuous refolding in a coiled flow inverter reactor directly coupled to a three-column periodic counter-current chromatography for capture of the product followed by a three-column con-current chromatography for polishing. The continuous bioprocessing train was run uninterrupted for 26 h to demonstrate its capability and the resulting output was analyzed for the various critical quality attributes, namely product purity (>99%), high molecular weight impurities (<0.5%), host cell proteins (<100 ppm), and host cell DNA (<10 ppb). All attributes were found to be consistent over the period of operation. The developed assembly offers smaller facility footprint, higher productivity, fewer hold steps, and significantly higher equipment and resin utilization. The complexities of process integration in the context of continuous processing have been highlighted. We hope that the study presented here will promote development of highly efficient, universal, end-to-end, fully continuous platforms for manufacturing of biotherapeutics. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:998-1009, 2017. © 2016 American Institute of Chemical Engineers.

A solution-processed binary cathode interfacial layer facilitates electron extraction for inverted polymer solar cells.

PubMed

Zhang, Xinyuan; Li, Zhiqi; Liu, Chunyu; Guo, Jiaxin; Shen, Liang; Guo, Wenbin

2018-03-15

The charge transfer and separation are significantly affected by the electron properties of the interface between the electron-donor layer and the carrier-transporting layer in polymer solar cells (PSCs). In this study, we investigate the electron extraction mechanism of PSCs with a low temperature solution-processed ZnO/PEI as electron transport layer. The incorporation of PEI layer can decrease the work function of ZnO and reduce interfacial barrier, which facilitates electron extraction and suppresses bimolecular recombination, leading to a significant performance enhancement. Furthermore, PEI layer can induce phase separation and passivite inorganic surface trap states as well as shift the interfacial energy offset between metal oxide and organic materials. This work offers a simple and effective way to improve the charge transporting property of organic photovoltaic devices. Copyright © 2017 Elsevier Inc. All rights reserved.

Inhibition of human copper trafficking by a small molecule significantly attenuates cancer cell proliferation.

PubMed

Wang, Jing; Luo, Cheng; Shan, Changliang; You, Qiancheng; Lu, Junyan; Elf, Shannon; Zhou, Yu; Wen, Yi; Vinkenborg, Jan L; Fan, Jun; Kang, Heebum; Lin, Ruiting; Han, Dali; Xie, Yuxin; Karpus, Jason; Chen, Shijie; Ouyang, Shisheng; Luan, Chihao; Zhang, Naixia; Ding, Hong; Merkx, Maarten; Liu, Hong; Chen, Jing; Jiang, Hualiang; He, Chuan

2015-12-01

Copper is a transition metal that plays critical roles in many life processes. Controlling the cellular concentration and trafficking of copper offers a route to disrupt these processes. Here we report small molecules that inhibit the human copper-trafficking proteins Atox1 and CCS, and so provide a selective approach to disrupt cellular copper transport. The knockdown of Atox1 and CCS or their inhibition leads to a significantly reduced proliferation of cancer cells, but not of normal cells, as well as to attenuated tumour growth in mouse models. We show that blocking copper trafficking induces cellular oxidative stress and reduces levels of cellular ATP. The reduced level of ATP results in activation of the AMP-activated protein kinase that leads to reduced lipogenesis. Both effects contribute to the inhibition of cancer cell proliferation. Our results establish copper chaperones as new targets for future developments in anticancer therapies.

Inhibition of human copper trafficking by a small molecule significantly attenuates cancer cell proliferation

PubMed Central

Wang, Jing; Luo, Cheng; Shan, Changliang; You, Qiancheng; Lu, Junyan; Elf, Shannon; Zhou, Yu; Wen, Yi; Vinkenborg, Jan L.; Fan, Jun; Kang, Heebum; Lin, Ruiting; Han, Dali; Xie, Yuxin; Karpus, Jason; Chen, Shijie; Ouyang, Shisheng; Luan, Chihao; Zhang, Naixia; Ding, Hong; Merkx, Maarten; Liu, Hong; Chen, Jing; Jiang, Hualiang; He, Chuan

2016-01-01

Copper is a transition metal that plays critical roles in many life processes. Controlling the cellular concentration and trafficking of copper offers a route to disrupt these processes. Here we report small molecules that inhibit the human copper-trafficking proteins Atox1 and CCS, and so provide a selective approach to disrupt cellular copper transport. The knockdown of Atox1 and CCS or their inhibition leads to a significantly reduced proliferation of cancer cells, but not of normal cells, as well as to attenuated tumour growth in mouse models. We show that blocking copper trafficking induces cellular oxidative stress and reduces levels of cellular ATP. The reduced level of ATP results in activation of the AMP-activated protein kinase that leads to reduced lipogenesis. Both effects contribute to the inhibition of cancer cell proliferation. Our results establish copper chaperones as new targets for future developments in anticancer therapies. PMID:26587712

Present status of metrology of electro-optical surveillance systems

NASA Astrophysics Data System (ADS)

Chrzanowski, K.

2017-10-01

There has been a significant progress in equipment for testing electro-optical surveillance systems over the last decade. Modern test systems are increasingly computerized, employ advanced image processing and offer software support in measurement process. However, one great challenge, in form of relative low accuracy, still remains not solved. It is quite common that different test stations, when testing the same device, produce different results. It can even happen that two testing teams, while working on the same test station, with the same tested device, produce different results. Rapid growth of electro-optical technology, poor standardization, limited metrology infrastructure, subjective nature of some measurements, fundamental limitations from laws of physics, tendering rules and advances in artificial intelligence are major factors responsible for such situation. Regardless, next decade should bring significant improvements, since improvement in measurement accuracy is needed to sustain fast growth of electro-optical surveillance technology.

Inhibition of human copper trafficking by a small molecule significantly attenuates cancer cell proliferation

NASA Astrophysics Data System (ADS)

Wang, Jing; Luo, Cheng; Shan, Changliang; You, Qiancheng; Lu, Junyan; Elf, Shannon; Zhou, Yu; Wen, Yi; Vinkenborg, Jan L.; Fan, Jun; Kang, Heebum; Lin, Ruiting; Han, Dali; Xie, Yuxin; Karpus, Jason; Chen, Shijie; Ouyang, Shisheng; Luan, Chihao; Zhang, Naixia; Ding, Hong; Merkx, Maarten; Liu, Hong; Chen, Jing; Jiang, Hualiang; He, Chuan

2015-12-01

Copper is a transition metal that plays critical roles in many life processes. Controlling the cellular concentration and trafficking of copper offers a route to disrupt these processes. Here we report small molecules that inhibit the human copper-trafficking proteins Atox1 and CCS, and so provide a selective approach to disrupt cellular copper transport. The knockdown of Atox1 and CCS or their inhibition leads to a significantly reduced proliferation of cancer cells, but not of normal cells, as well as to attenuated tumour growth in mouse models. We show that blocking copper trafficking induces cellular oxidative stress and reduces levels of cellular ATP. The reduced level of ATP results in activation of the AMP-activated protein kinase that leads to reduced lipogenesis. Both effects contribute to the inhibition of cancer cell proliferation. Our results establish copper chaperones as new targets for future developments in anticancer therapies.

Exploring the success of an integrated primary care partnership: a longitudinal study of collaboration processes.

PubMed

Valentijn, Pim P; Vrijhoef, Hubertus J M; Ruwaard, Dirk; de Bont, Antoinette; Arends, Rosa Y; Bruijnzeels, Marc A

2015-01-22

Forming partnerships is a prominent strategy used to promote integrated service delivery across health and social service systems. Evidence about the collaboration process upon which partnerships evolve has rarely been addressed in an integrated-care setting. This study explores the longitudinal relationship of the collaboration process and the influence on the final perceived success of a partnership in such a setting. The collaboration process through which partnerships evolve is based on a conceptual framework which identifies five themes: shared ambition, interests and mutual gains, relationship dynamics, organisational dynamics and process management. Fifty-nine out of 69 partnerships from a national programme in the Netherlands participated in this survey study. At baseline, 338 steering committee members responded, and they returned 320 questionnaires at follow-up. Multiple-regression-analyses were conducted to explore the relationship between the baseline as well as the change in the collaboration process and the final success of the partnerships. Mutual gains and process management were the most significant baseline predictors for the final success of the partnership. A positive change in the relationship dynamics had a significant effect on the final success of a partnership. Insight into the collaboration process of integrated primary care partnerships offers a potentially powerful way of predicting their success. Our findings underscore the importance of monitoring the collaboration process during the development of the partnerships in order to achieve their full collaborative advantage.

Influence of salt content and processing time on sensory characteristics of cooked "lacón".

PubMed

Purriños, Laura; Bermúdez, Roberto; Temperán, Sara; Franco, Daniel; Carballo, Javier; Lorenzo, José M

2011-04-01

The influence of salt content and processing time on the sensory properties of cooked "lacón" were determined. "Lacón" is a traditional dry-cured and ripened meat product made in the north-west of Spain from the fore leg of the pig, following a similar process to that of dry-cured ham. Six batches of "lacón" were salted with different amounts of salt (LS (3 days of salting), MS (4 days of salting) and HS (5 days of salting)) and ripened during two times (56 and 84 days of dry-ripening). Cured odour in all batches studied, red colour and rancid odour in MS and HS batches, flavour intensity in MS batch and fat yellowness, rancid flavour and hardness in the HS batch were significantly different with respect to the time of processing. Appearance, odour, flavour and texture were not significantly affected by the salt content (P>0.05). However, the saltiness score showed significant differences with respect to the salt levels in all studied batches (56 and 84 days of process). The principal component analysis showed that physicochemical traits were the most important ones concerning the quality of dry-cured "lacón" and offered a good separation of the mean samples according to the dry ripening days and salt level. © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

The UK Healthy Universities Self-Review Tool: Whole System Impact.

PubMed

Dooris, Mark; Farrier, Alan; Doherty, Sharon; Holt, Maxine; Monk, Robert; Powell, Susan

2018-06-01

Over recent years, there has been growing interest in Healthy Universities, evidenced by an increased number of national networks and the participation of 375 participants from over 30 countries in the 2015 International Conference on Health Promoting Universities and Colleges, which also saw the launch of the Okanagan Charter. This paper reports on research exploring the use and impact of the UK Healthy Universities Network's self review tool, specifically examining whether this has supported universities to understand and embed a whole system approach. The research study comprised two stages, the first using an online questionnaire and the second using focus groups. The findings revealed a wide range of perspectives under five overarching themes: motivations; process; outcomes/benefits; challenges/suggested improvements; and future use. In summary, the self review tool was extremely valuable and, when engaged with fully, offered significant benefits to universities seeking to improve the health and wellbeing of their communities. These benefits were felt by institutions at different stages in the journey and spanned outcome and process dimensions: not only did the tool offer an engaging and user-friendly means of undertaking internal benchmarking, generating an easy-to-understand report summarizing strengths and weaknesses; it also proved useful in building understanding of the whole system Healthy Universities approach and served as a catalyst to effective cross-university and cross-sectoral partnership working. Additionally, areas for potential enhancement were identified, offering opportunities to increase the tool's utility further whilst engaging actively in the development of a global movement for Healthy Universities.

The prevalence and practice of academies of medical educators: a survey of U.S. medical schools.

PubMed

Searle, Nancy S; Thompson, Britta M; Friedland, Joan A; Lomax, James W; Drutz, Jan E; Coburn, Michael; Nelson, Elizabeth A

2010-01-01

Academies of medical educators can be defined as formal organizations of academic teaching faculty recognized for excellence in their contributions to their school's education mission and who, as a group, serve specific needs of the institution. The authors studied the characteristics of academies, including the processes for admission, selection, and retention of academy members; the types of faculty who are academy members; program goals; benefits offered by academies to the individual and to the institution; funding sources and amounts; and the rapid increase in academies since 2003. In 2008, the authors sent an online questionnaire to 127 U.S. medical schools. Responses were analyzed using descriptive statistics. To determine differences between groups, multivariate analysis of variance was performed. Correlation analysis (Pearson r) was used to identify association between variables. Effect size was determined using eta squared (eta2). Thirty-six of the 122 responding schools (96% response rate) reported having academies; 21 schools had initiated academies since 2003, and 33 schools were planning or considering academies. There was a statistically significant difference between academies established before 2004 and in 2004 regarding benefits offered to individuals, membership terms and maintenance requirements, and goals. Rogers' theory of the diffusion of innovation may explain the recent spread of academies. When beginning or reexamining existing academy programs, institutions should consider goals, application process, benefits offered to members as well as the institution, expendable resources, and means of support, because the final product depends on the choices made at the beginning.

Training directionally selective motion pathways can significantly improve reading efficiency

NASA Astrophysics Data System (ADS)

Lawton, Teri

2004-06-01

This study examined whether perceptual learning at early levels of visual processing would facilitate learning at higher levels of processing. This was examined by determining whether training the motion pathways by practicing leftright movement discrimination, as found previously, would improve the reading skills of inefficient readers significantly more than another computer game, a word discrimination game, or the reading program offered by the school. This controlled validation study found that practicing left-right movement discrimination 5-10 minutes twice a week (rapidly) for 15 weeks doubled reading fluency, and significantly improved all reading skills by more than one grade level, whereas inefficient readers in the control groups barely improved on these reading skills. In contrast to previous studies of perceptual learning, these experiments show that perceptual learning of direction discrimination significantly improved reading skills determined at higher levels of cognitive processing, thereby being generalized to a new task. The deficits in reading performance and attentional focus experienced by the person who struggles when reading are suggested to result from an information overload, resulting from timing deficits in the direction-selectivity network proposed by Russell De Valois et al. (2000), that following practice on direction discrimination goes away. This study found that practicing direction discrimination rapidly transitions the inefficient 7-year-old reader to an efficient reader.

Advanced refractory-metal and process technology for the fabrication of x-ray masks

NASA Astrophysics Data System (ADS)

Brooks, Cameron J.; Racette, Kenneth C.; Lercel, Michael J.; Powers, Lynn A.; Benoit, Douglas E.

1999-06-01

This paper provides an in-depth report of the advanced materials and process technology being developed for x-ray mask manufacturing at IBM. Masks using diamond membranes as replacement for silicon carbide are currently being fabricated. Alternate tantalum-based absorbers, such as tantalum boron, which offer improved etch resolution and critical dimension control, as well as higher x-ray absorption, are also being investigated. In addition to the absorber studies, the development of conductive chromium- based hard-mask films to replace the current silicon oxynitride layer is being explored. The progress of this advanced-materials work, which includes significant enhancements to x-ray mask image-placement performance, will be outlined.

Hubert: Software for efficient analysis of in-situ nuclear forward scattering experiments

NASA Astrophysics Data System (ADS)

Vrba, Vlastimil; Procházka, Vít; Smrčka, David; Miglierini, Marcel

2016-10-01

Combination of short data acquisition time and local investigation of a solid state through hyperfine parameters makes nuclear forward scattering (NFS) a unique experimental technique for investigation of fast processes. However, the total number of acquired NFS time spectra may be very high. Therefore an efficient way of the data evaluation is needed. In this paper we report the development of Hubert software package as a response to the rapidly developing field of in-situ NFS experiments. Hubert offers several useful features for data files processing and could significantly shorten the evaluation time by using a simple connection between the neighboring time spectra through their input and output parameter values.

GPU-computing in econophysics and statistical physics

NASA Astrophysics Data System (ADS)

Preis, T.

2011-03-01

A recent trend in computer science and related fields is general purpose computing on graphics processing units (GPUs), which can yield impressive performance. With multiple cores connected by high memory bandwidth, today's GPUs offer resources for non-graphics parallel processing. This article provides a brief introduction into the field of GPU computing and includes examples. In particular computationally expensive analyses employed in financial market context are coded on a graphics card architecture which leads to a significant reduction of computing time. In order to demonstrate the wide range of possible applications, a standard model in statistical physics - the Ising model - is ported to a graphics card architecture as well, resulting in large speedup values.

On noise and the performance benefit of nonblocking collectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Widener, Patrick M.; Levy, Scott; Ferreira, Kurt B.

Relaxed synchronization offers the potential of maintaining application scalability by allowing many processes to make independent progress when some processes suffer delays. Yet, the benefits of this approach in important parallel workloads have not been investigated in detail. In this paper, we use a validated simulation approach to explore the noise mitigation effects of idealized nonblocking collectives in workloads where these collectives are a major contributor to total execution time. In conclusion, although nonblocking collectives are unlikely to provide significant noise mitigation to applications in the low-OS-noise environments expected in next-generation HPC systems, we show that they can potentially improvemore » application runtime with respect to other noise types.« less

An Analysis of the Effectiveness of the Admissions Policy for AN Outreach Program for Girls in Engineering

NASA Astrophysics Data System (ADS)

Nicoletti, Denise

The goals of Camp REACH (Reinventing Engineering and Creating New Horizons) are to attract girls to engineering, increase their self-confidence and self-esteem, and educate their parents or guardians about engineering. In this article, the current acceptance process (essay and tottery) is examined to see if the program attracts and offers acceptance to girls who are likely to benefit from the program. The analysis shows that girls who submit higher quality essays are in many ways more likely to benefit. However, girls with poorer quality essays in some cases show significant benefit. The conclusion is that the acceptance process should not he made more competitive.

On noise and the performance benefit of nonblocking collectives

DOE PAGES

Widener, Patrick M.; Levy, Scott; Ferreira, Kurt B.; ...

2015-11-02

Relaxed synchronization offers the potential of maintaining application scalability by allowing many processes to make independent progress when some processes suffer delays. Yet, the benefits of this approach in important parallel workloads have not been investigated in detail. In this paper, we use a validated simulation approach to explore the noise mitigation effects of idealized nonblocking collectives in workloads where these collectives are a major contributor to total execution time. In conclusion, although nonblocking collectives are unlikely to provide significant noise mitigation to applications in the low-OS-noise environments expected in next-generation HPC systems, we show that they can potentially improvemore » application runtime with respect to other noise types.« less

Contingency Management and Deliberative Decision-Making Processes.

PubMed

Regier, Paul S; Redish, A David

2015-01-01

Contingency management is an effective treatment for drug addiction. The current explanation for its success is rooted in alternative reinforcement theory. We suggest that alternative reinforcement theory is inadequate to explain the success of contingency management and produce a model based on demand curves that show how little the monetary rewards offered in this treatment would affect drug use. Instead, we offer an explanation of its success based on the concept that it accesses deliberative decision-making processes. We suggest that contingency management is effective because it offers a concrete and immediate alternative to using drugs, which engages deliberative processes, improves the ability of those deliberative processes to attend to non-drug options, and offsets more automatic action-selection systems. This theory makes explicit predictions that can be tested, suggests which users will be most helped by contingency management, and suggests improvements in its implementation.

Contingency Management and Deliberative Decision-Making Processes

PubMed Central

Regier, Paul S.; Redish, A. David

2015-01-01

Contingency management is an effective treatment for drug addiction. The current explanation for its success is rooted in alternative reinforcement theory. We suggest that alternative reinforcement theory is inadequate to explain the success of contingency management and produce a model based on demand curves that show how little the monetary rewards offered in this treatment would affect drug use. Instead, we offer an explanation of its success based on the concept that it accesses deliberative decision-making processes. We suggest that contingency management is effective because it offers a concrete and immediate alternative to using drugs, which engages deliberative processes, improves the ability of those deliberative processes to attend to non-drug options, and offsets more automatic action-selection systems. This theory makes explicit predictions that can be tested, suggests which users will be most helped by contingency management, and suggests improvements in its implementation. PMID:26082725

Creating a standardized process to offer the standard of care: continuous process improvement methodology is associated with increased rates of sperm cryopreservation among adolescent and young adult males with cancer.

PubMed

Shnorhavorian, Margarett; Kroon, Leah; Jeffries, Howard; Johnson, Rebecca

2012-11-01

There is limited literature on strategies to overcome the barriers to sperm banking among adolescent and young adult (AYA) males with cancer. By standardizing our process for offering sperm banking to AYA males before cancer treatment, we aimed to improve rates of sperm banking at our institution. Continuous process improvement is a technique that has recently been applied to improve health care delivery. We used continuous process improvement methodologies to create a standard process for fertility preservation for AYA males with cancer at our institution. We compared rates of sperm banking before and after standardization. In the 12-month period after implementation of a standardized process, 90% of patients were offered sperm banking. We demonstrated an 8-fold increase in the proportion of AYA males' sperm banking, and a 5-fold increase in the rate of sperm banking at our institution. Implementation of a standardized process for sperm banking for AYA males with cancer was associated with increased rates of sperm banking at our institution. This study supports the role of standardized health care in decreasing barriers to sperm banking.

Measuring and modeling for the assessment of the genetic background behind cognitive processes in donkeys.

PubMed

Navas, Francisco Javier; Jordana, Jordi; León, José Manuel; Arando, Ander; Pizarro, Gabriela; McLean, Amy Katherine; Delgado, Juan Vicente

2017-08-01

New productive niches can offer new commercial perspectives linked to donkeys' products and human therapeutic or leisure applications. However, no assessment for selection criteria has been carried out yet. First, we assessed the animal inherent features and environmental factors that may potentially influence several cognitive processes in donkeys. Then, we aimed at describing a practical methodology to quantify such cognitive processes, seeking their inclusion in breeding and conservation programmes, through a multifactorial linear model. Sixteen cognitive process-related traits were scored on a problem-solving test in a sample of 300 Andalusian donkeys for three consecutive years from 2013 to 2015. The linear model assessed the influence and interactions of four environmental factors, sex as an animal-inherent factor, age as a covariable, and the interactions between these factors. Analyses of variance were performed with GLM procedure of SPSS Statistics for Windows, Version 24.0 software to assess the relative importance of each factor. All traits were significantly (P<0.05) affected by all factors in the model except for sex that was not significant for some of the cognitive processes, and stimulus which was not significant (P<0.05) for all of them except for the coping style related ones. The interaction between all factors within the model was non-significant (P<0.05) for almost all cognitive processes. The development of complex multifactorial models to study cognitive processes may counteract the inherent variability in behavior genetics and the estimation and prediction of related breeding parameters, key for the implementation of successful conservation programmes in apparently functionally misplaced endangered breeds. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimization of Primary Drying in Lyophilization during Early Phase Drug Development using a Definitive Screening Design with Formulation and Process Factors.

PubMed

Goldman, Johnathan M; More, Haresh T; Yee, Olga; Borgeson, Elizabeth; Remy, Brenda; Rowe, Jasmine; Sadineni, Vikram

2018-06-08

Development of optimal drug product lyophilization cycles is typically accomplished via multiple engineering runs to determine appropriate process parameters. These runs require significant time and product investments, which are especially costly during early phase development when the drug product formulation and lyophilization process are often defined simultaneously. Even small changes in the formulation may require a new set of engineering runs to define lyophilization process parameters. In order to overcome these development difficulties, an eight factor definitive screening design (DSD), including both formulation and process parameters, was executed on a fully human monoclonal antibody (mAb) drug product. The DSD enables evaluation of several interdependent factors to define critical parameters that affect primary drying time and product temperature. From these parameters, a lyophilization development model is defined where near optimal process parameters can be derived for many different drug product formulations. This concept is demonstrated on a mAb drug product where statistically predicted cycle responses agree well with those measured experimentally. This design of experiments (DoE) approach for early phase lyophilization cycle development offers a workflow that significantly decreases the development time of clinically and potentially commercially viable lyophilization cycles for a platform formulation that still has variable range of compositions. Copyright © 2018. Published by Elsevier Inc.

Short communication: Evaluation of a sol-gel-based stainless steel surface modification to reduce fouling and biofilm formation during pasteurization of milk.

PubMed

Liu, Dylan Zhe; Jindal, Shivali; Amamcharla, Jayendra; Anand, Sanjeev; Metzger, Lloyd

2017-04-01

Milk fouling and biofilms are common problems in the dairy industry across many types of processing equipment. One way to reduce milk fouling and biofilms is to modify the characteristics of milk contact surfaces. This study examines the viability of using Thermolon (Porcelain Industries Inc., Dickson, TN), a sol-gel-based surface modification of stainless steel, during thermal processing of milk. We used stainless steel 316L (control) and sol-gel-modified coupons in this study to evaluate fouling behavior and bacterial adhesion. The surface roughness as measured by an optical profiler indicated that the control coupons had a slightly smoother finish. Contact angle measurements showed that the modified surface led to a higher water contact angle, suggesting a more hydrophobic surface. The modified surface also had a lower surface energy (32.4 ± 1.4 mN/m) than the control surface (41.36 ± 2.7 mN/m). We evaluated the susceptibility of control and modified stainless steel coupons to fouling in a benchtop plate heat exchanger. We observed a significant reduction in the amount of fouled layer on modified surfaces. We found an average fouling weight of 19.21 mg/cm 2 and 0.37 mg/cm 2 on the control and modified stainless steel coupons, respectively. We also examined the adhesion of Bacillus and biofilm formation, and observed that the modified stainless steel surface offered greater resistance to biofilm formation. Overall, the Thermolon-modified surface showed potential in the thermal processing of milk, offering significantly lower fouling and bacterial attachment than the control surface. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effects of ward rotation on subsequent transition processes of Japanese clinical nurses.

PubMed

Fujino, Mitsuku; Nojima, Yoshiko

2005-03-01

The purpose of this study was to examine the experience of Japanese clinical nurses undertaking a ward rotation in a general hospital, and its effects on subsequent processes relating to: (i) perception of ward rotation; (ii) reactions to the ward transition process; and (iii) outcomes of ward rotation. In-depth interviews were conducted with 21 Japanese clinical nurses who had an average of 8.8 years (SD = 5.50) clinical experience. Findings indicated that participants experienced role overload, role incongruity and/or role underload, role overqualification, or role ambiguity in the new environment. These role stresses created critical emotional distress during the transition process. The high desire for career development facilitated the transition process, while lack of preparation inhibited the transition process. To facilitate smooth transition, well-prepared and structured supports based on reliable interpersonal relationships are necessary. The findings offer significant cues for effective ward rotation programs. The implication for nursing administrators is that appropriate ward rotations enhance confidence and promote effective role development in the new clinical setting.

Power effects on cognitive control: Turning conflict into action.

PubMed

Schmid, Petra C; Kleiman, Tali; Amodio, David M

2015-06-01

Power is known to promote effective goal pursuit, especially when it requires one to overcome distractions or bias. We proposed that this effect involves the ability to engage and implement cognitive control. In Study 1, we demonstrated that power enhances behavioral performance on a response conflict task and that it does so by enhancing controlled processing rather than by reducing automatic processing. In Study 2, we used an event-related potential index of anterior cingulate activity to test whether power effects on control were due to enhanced conflict sensitivity or action implementation. Power did not significantly affect neural sensitivity to conflict; rather, high power was associated with a stronger link between conflict processing and intended action, relative to low power. These findings suggest a new perspective on how social factors can affect controlled processing and offer new evidence regarding the transition between conflict detection and the implementation of action control. (c) 2015 APA, all rights reserved).

Listening to Another Sense: Somatosensory Integration in the Auditory System

PubMed Central

Wu, Calvin; Stefanescu, Roxana A.; Martel, David T.

2014-01-01

Conventionally, sensory systems are viewed as separate entities, each with its own physiological process serving a different purpose. However, many functions require integrative inputs from multiple sensory systems, and sensory intersection and convergence occur throughout the central nervous system. The neural processes for hearing perception undergo significant modulation by the two other major sensory systems, vision and somatosensation. This synthesis occurs at every level of the ascending auditory pathway: the cochlear nucleus, inferior colliculus, medial geniculate body, and the auditory cortex. In this review, we explore the process of multisensory integration from 1) anatomical (inputs and connections), 2) physiological (cellular responses), 3) functional, and 4) pathological aspects. We focus on the convergence between auditory and somatosensory inputs in each ascending auditory station. This review highlights the intricacy of sensory processing, and offers a multisensory perspective regarding the understanding of sensory disorders. PMID:25526698

Laser processing of ceramics for microelectronics manufacturing

NASA Astrophysics Data System (ADS)

Sposili, Robert S.; Bovatsek, James; Patel, Rajesh

2017-03-01

Ceramic materials are used extensively in the microelectronics, semiconductor, and LED lighting industries because of their electrically insulating and thermally conductive properties, as well as for their high-temperature-service capabilities. However, their brittleness presents significant challenges for conventional machining processes. In this paper we report on a series of experiments that demonstrate and characterize the efficacy of pulsed nanosecond UV and green lasers in machining ceramics commonly used in microelectronics manufacturing, such as aluminum oxide (alumina) and aluminum nitride. With a series of laser pocket milling experiments, fundamental volume ablation rate and ablation efficiency data were generated. In addition, techniques for various industrial machining processes, such as shallow scribing and deep scribing, were developed and demonstrated. We demonstrate that lasers with higher average powers offer higher processing rates with the one exception of deep scribes in aluminum nitride, where a lower average power but higher pulse energy source outperformed a higher average power laser.

Accelerating Biomedical Signal Processing Using GPU: A Case Study of Snore Sound Feature Extraction.

PubMed

Guo, Jian; Qian, Kun; Zhang, Gongxuan; Xu, Huijie; Schuller, Björn

2017-12-01

The advent of 'Big Data' and 'Deep Learning' offers both, a great challenge and a huge opportunity for personalised health-care. In machine learning-based biomedical data analysis, feature extraction is a key step for 'feeding' the subsequent classifiers. With increasing numbers of biomedical data, extracting features from these 'big' data is an intensive and time-consuming task. In this case study, we employ a Graphics Processing Unit (GPU) via Python to extract features from a large corpus of snore sound data. Those features can subsequently be imported into many well-known deep learning training frameworks without any format processing. The snore sound data were collected from several hospitals (20 subjects, with 770-990 MB per subject - in total 17.20 GB). Experimental results show that our GPU-based processing significantly speeds up the feature extraction phase, by up to seven times, as compared to the previous CPU system.

Supramolecular reactivity in the gas phase: investigating the intrinsic properties of non-covalent complexes.

PubMed

Cera, Luca; Schalley, Christoph A

2014-03-21

The high vacuum inside a mass spectrometer offers unique conditions to broaden our view on the reactivity of supramolecules. Because dynamic exchange processes between complexes are efficiently suppressed, the intrinsic and intramolecular reactivity of the complexes of interest is observed. Besides this, the significantly higher strength of non-covalent interactions in the absence of competing solvent allows processes to occur that are unable to compete in solution. The present review highlights a series of examples illustrating different aspects of supramolecular gas-phase reactivity ranging from the dissociation and formation of covalent bonds in non-covalent complexes through the reactivity in the restricted inner phase of container molecules and step-by-step mechanistic studies of organocatalytic reaction cycles to cage contraction reactions, processes induced by electron capture, and finally dynamic molecular motion within non-covalent complexes as unravelled by hydrogen-deuterium exchange processes performed in the gas phase.

Software For Design Of Life-Support Systems

NASA Technical Reports Server (NTRS)

Rudokas, Mary R.; Cantwell, Elizabeth R.; Robinson, Peter I.; Shenk, Timothy W.

1991-01-01

Design Assistant Workstation (DAWN) computer program is prototype of expert software system for analysis and design of regenerative, physical/chemical life-support systems that revitalize air, reclaim water, produce food, and treat waste. Incorporates both conventional software for quantitative mathematical modeling of physical, chemical, and biological processes and expert system offering user stored knowledge about materials and processes. Constructs task tree as it leads user through simulated process, offers alternatives, and indicates where alternative not feasible. Also enables user to jump from one design level to another.

Development of permissible exposure limits: the California experience.

PubMed

Cohen, Richard; Steinmaus, Craig; Quinlan, Patricia; Ku, Robert; Cooper, Michael; Roberts, Tim

2006-01-01

The California OSHA Airborne Contaminant Advisory Committee reviewed several hundred substances and recommended occupational exposure limits with the intent of worker and employer protection. The model used offers important benefits. First, by allowing open meetings, the process was transparent, and input could be offered by concerned stakeholders. Second, the process was data-driven and, therefore, less susceptible to bias and error. Third, by incorporating members with backgrounds in toxicology, epidemiology, risk assessment, occupational medicine, and industrial hygiene, the process fostered a thorough and diverse assessment of substances.

The significance of task significance: Job performance effects, relational mechanisms, and boundary conditions.

PubMed

Grant, Adam M

2008-01-01

Does task significance increase job performance? Correlational designs and confounded manipulations have prevented researchers from assessing the causal impact of task significance on job performance. To address this gap, 3 field experiments examined the performance effects, relational mechanisms, and boundary conditions of task significance. In Experiment 1, fundraising callers who received a task significance intervention increased their levels of job performance relative to callers in 2 other conditions and to their own prior performance. In Experiment 2, task significance increased the job dedication and helping behavior of lifeguards, and these effects were mediated by increases in perceptions of social impact and social worth. In Experiment 3, conscientiousness and prosocial values moderated the effects of task significance on the performance of new fundraising callers. The results provide fresh insights into the effects, relational mechanisms, and boundary conditions of task significance, offering noteworthy implications for theory, research, and practice on job design, social information processing, and work motivation and performance. 2008 APA

Structural Integrity of an Electron Beam Melted Titanium Alloy

PubMed Central

Lancaster, Robert; Davies, Gareth; Illsley, Henry; Jeffs, Spencer; Baxter, Gavin

2016-01-01

Advanced manufacturing encompasses the wide range of processes that consist of “3D printing” of metallic materials. One such method is Electron Beam Melting (EBM), a modern build technology that offers significant potential for lean manufacture and a capability to produce fully dense near-net shaped components. However, the manufacture of intricate geometries will result in variable thermal cycles and thus a transient microstructure throughout, leading to a highly textured structure. As such, successful implementation of these technologies requires a comprehensive assessment of the relationships of the key process variables, geometries, resultant microstructures and mechanical properties. The nature of this process suggests that it is often difficult to produce representative test specimens necessary to achieve a full mechanical property characterisation. Therefore, the use of small scale test techniques may be exploited, specifically the small punch (SP) test. The SP test offers a capability for sampling miniaturised test specimens from various discrete locations in a thin-walled component, allowing a full characterisation across a complex geometry. This paper provides support in working towards development and validation strategies in order for advanced manufactured components to be safely implemented into future gas turbine applications. This has been achieved by applying the SP test to a series of Ti-6Al-4V variants that have been manufactured through a variety of processing routes including EBM and investigating the structural integrity of each material and how this controls the mechanical response. PMID:28773590

Spike processing with a graphene excitable laser

PubMed Central

Shastri, Bhavin J.; Nahmias, Mitchell A.; Tait, Alexander N.; Rodriguez, Alejandro W.; Wu, Ben; Prucnal, Paul R.

2016-01-01

Novel materials and devices in photonics have the potential to revolutionize optical information processing, beyond conventional binary-logic approaches. Laser systems offer a rich repertoire of useful dynamical behaviors, including the excitable dynamics also found in the time-resolved “spiking” of neurons. Spiking reconciles the expressiveness and efficiency of analog processing with the robustness and scalability of digital processing. We demonstrate a unified platform for spike processing with a graphene-coupled laser system. We show that this platform can simultaneously exhibit logic-level restoration, cascadability and input-output isolation—fundamental challenges in optical information processing. We also implement low-level spike-processing tasks that are critical for higher level processing: temporal pattern detection and stable recurrent memory. We study these properties in the context of a fiber laser system and also propose and simulate an analogous integrated device. The addition of graphene leads to a number of advantages which stem from its unique properties, including high absorption and fast carrier relaxation. These could lead to significant speed and efficiency improvements in unconventional laser processing devices, and ongoing research on graphene microfabrication promises compatibility with integrated laser platforms. PMID:26753897

Power ultrasound-assisted cleaner leather dyeing technique: influence of process parameters.

PubMed

Sivakumar, Venkatasubramanian; Rao, Paruchuri Gangadhar

2004-03-01

The application of power ultrasound to leather processing has a significant role in the concept of "clean technology" for leather production. The effect of power ultrasound in leather dyeing has been compared with dyeing in the absence of ultrasound and conventional drumming. The power ultrasound source used in these experiments was ultrasonic cleaner (150 W and 33 kHz). The effect of various process parameters such as amount of dye offer, temperature, and type of dye has been experimentally found out. The effect of presonication of dye solution as well as leather has been studied. Experiments at ultrasonic bath temperature were carried out to find out the combined thermal as well as stirring effects of ultrasound. Dyeing in the presence of ultrasound affords about 37.5 (1.8 times) difference as increase in % dye exhaustion or about 50% decrease in the time required for dyeing compared to dyeing in the absence of ultrasound for 4% acid red dye. About 29 (1.55 times) increase in % dye exhaustion or 30% reduction in time required for dyeing was observed using ultrasound at stationary condition compared with conventional dynamic drumming conditions. The effect of ultrasound at constant temperature conditions with a control experiment has also been studied. The dye exhaustion increases as the temperature increases (30-60 degrees C) and better results are observed at higher temperature due to the use of ultrasound. Presonication of dye solution or crust leather prior to the dyeing process has no significant improvement in dye exhaustion, suggesting ultrasound effect is realized when it is applied during the dyeing process. The results indicate that 1697 and 1416 ppm of dye can be reduced in the spent liquor due to the use of ultrasound for acid red (for 100 min) and acid black (for 3 h) dyes, respectively, thereby reducing the pollution load in the effluent stream. The color yield of the leather as inferred from the reflectance measurement indicates that dye offer can be halved when ultrasound is employed to promote dyeing. Scanning electron microscopy analysis of the cross section of the dyed leather indicates that fiber structure is not affected due to the use of ultrasound under the given process conditions. The present study clearly demonstrates that ultrasound can be used as a tool to improve the rate of exhaustion of dye, reduce pollution load in the spent effluent liquor, and improve the quality of leather produced. The study also offered provision to employ optimum levels of chemicals and increases percentage exhaustion for a given time, thereby limiting the pollution load in the tannery effluent, which is of great social concern.

Sensing Human Activity: GPS Tracking

PubMed Central

van der Spek, Stefan; van Schaick, Jeroen; de Bois, Peter; de Haan, Remco

2009-01-01

The enhancement of GPS technology enables the use of GPS devices not only as navigation and orientation tools, but also as instruments used to capture travelled routes: as sensors that measure activity on a city scale or the regional scale. TU Delft developed a process and database architecture for collecting data on pedestrian movement in three European city centres, Norwich, Rouen and Koblenz, and in another experiment for collecting activity data of 13 families in Almere (The Netherlands) for one week. The question posed in this paper is: what is the value of GPS as ‘sensor technology’ measuring activities of people? The conclusion is that GPS offers a widely useable instrument to collect invaluable spatial-temporal data on different scales and in different settings adding new layers of knowledge to urban studies, but the use of GPS-technology and deployment of GPS-devices still offers significant challenges for future research. PMID:22574061

Low-Cost CdTe/Silicon Tandem Solar Cells

DOE PAGES

Tamboli, Adele C.; Bobela, David C.; Kanevce, Ana; ...

2017-09-06

Achieving higher photovoltaic efficiency in single-junction devices is becoming increasingly difficult, but tandem modules offer the possibility of significant efficiency improvements. By device modeling we show that four-terminal CdTe/Si tandem solar modules offer the prospect of 25%-30% module efficiency, and technoeconomic analysis predicts that these efficiency gains can be realized at costs per Watt that are competitive with CdTe and Si single junction alternatives. The cost per Watt of the modeled tandems is lower than crystalline silicon, but slightly higher than CdTe alone. But, these higher power modules reduce area-related balance of system costs, providing increased value especially in area-constrainedmore » applications. This avenue for high-efficiency photovoltaics enables improved performance on a near-term timeframe, as well as a path to further reduced levelized cost of electricity as module and cell processes continue to advance.« less

Current status of accreditation for drug testing in hair.

PubMed

Cooper, Gail; Moeller, Manfred; Kronstrand, Robert

2008-03-21

At the annual meeting of the Society of Hair Testing in Vadstena, Sweden in 2006, a committee was appointed to address the issue of guidelines for hair testing and to assess the current status of accreditation amongst laboratories offering drug testing in hair. A short questionnaire was circulated amongst the membership and interested parties. Fifty-two responses were received from hair testing laboratories providing details on the amount and type of hair tests they offered and the status of accreditation within their facilities. Although the vast majority of laboratories follow current guidelines (83%), only nine laboratories were accredited to ISO/IEC 17025 for hair testing. A significant number of laboratories reporting that they were in the process of developing quality systems with a view to accrediting their methods within 2-3 years. This study provides an insight into the status of accreditation in hair testing laboratories and supports the need for guidelines to encourage best practice.

Low-Cost CdTe/Silicon Tandem Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tamboli, Adele C.; Bobela, David C.; Kanevce, Ana

Achieving higher photovoltaic efficiency in single-junction devices is becoming increasingly difficult, but tandem modules offer the possibility of significant efficiency improvements. By device modeling we show that four-terminal CdTe/Si tandem solar modules offer the prospect of 25%-30% module efficiency, and technoeconomic analysis predicts that these efficiency gains can be realized at costs per Watt that are competitive with CdTe and Si single junction alternatives. The cost per Watt of the modeled tandems is lower than crystalline silicon, but slightly higher than CdTe alone. But, these higher power modules reduce area-related balance of system costs, providing increased value especially in area-constrainedmore » applications. This avenue for high-efficiency photovoltaics enables improved performance on a near-term timeframe, as well as a path to further reduced levelized cost of electricity as module and cell processes continue to advance.« less

Zooming In on Plant Hormone Analysis: Tissue- and Cell-Specific Approaches.

PubMed

Novák, Ondřej; Napier, Richard; Ljung, Karin

2017-04-28

Plant hormones are a group of naturally occurring, low-abundance organic compounds that influence physiological processes in plants. Our knowledge of the distribution profiles of phytohormones in plant organs, tissues, and cells is still incomplete, but advances in mass spectrometry have enabled significant progress in tissue- and cell-type-specific analyses of phytohormones over the last decade. Mass spectrometry is able to simultaneously identify and quantify hormones and their related substances. Biosensors, on the other hand, offer continuous monitoring; can visualize local distributions and real-time quantification; and, in the case of genetically encoded biosensors, are noninvasive. Thus, biosensors offer additional, complementary technologies for determining temporal and spatial changes in phytohormone concentrations. In this review, we focus on recent advances in mass spectrometry-based quantification, describe monitoring systems based on biosensors, and discuss validations of the various methods before looking ahead at future developments for both approaches.

Scales of Natural Flood Management

NASA Astrophysics Data System (ADS)

Nicholson, Alex; Quinn, Paul; Owen, Gareth; Hetherington, David; Piedra Lara, Miguel; O'Donnell, Greg

2016-04-01

The scientific field of Natural flood Management (NFM) is receiving much attention and is now widely seen as a valid solution to sustainably manage flood risk whilst offering significant multiple benefits. However, few examples exist looking at NFM on a large scale (>10km2). Well-implemented NFM has the effect of restoring more natural catchment hydrological and sedimentological processes, which in turn can have significant flood risk and WFD benefits for catchment waterbodies. These catchment scale improvements in-turn allow more 'natural' processes to be returned to rivers and streams, creating a more resilient system. Although certain NFM interventions may appear distant and disconnected from main stem waterbodies, they will undoubtedly be contributing to WFD at the catchment waterbody scale. This paper offers examples of NFM, and explains how they can be maximised through practical design across many scales (from feature up to the whole catchment). New tools to assist in the selection of measures and their location, and to appreciate firstly, the flooding benefit at the local catchment scale and then show a Flood Impact Model that can best reflect the impacts of local changes further downstream. The tools will be discussed in the context of our most recent experiences on NFM projects including river catchments in the north east of England and in Scotland. This work has encouraged a more integrated approach to flood management planning that can use both traditional and novel NFM strategies in an effective and convincing way.

Aqueous stream characterization from biomass fast pyrolysis and catalytic fast pyrolysis

DOE PAGES

Black, Brenna A.; Michener, William E.; Ramirez, Kelsey J.; ...

2016-09-05

Here, biomass pyrolysis offers a promising means to rapidly depolymerize lignocellulosic biomass for subsequent catalytic upgrading to renewable fuels. Substantial efforts are currently ongoing to optimize pyrolysis processes including various fast pyrolysis and catalytic fast pyrolysis schemes. In all cases, complex aqueous streams are generated containing solubilized organic compounds that are not converted to target fuels or chemicals and are often slated for wastewater treatment, in turn creating an economic burden on the biorefinery. Valorization of the species in these aqueous streams, however, offers significant potential for substantially improving the economics and sustainability of thermochemical biorefineries. To that end, heremore » we provide a thorough characterization of the aqueous streams from four pilot-scale pyrolysis processes: namely, from fast pyrolysis, fast pyrolysis with downstream fractionation, in situ catalytic fast pyrolysis, and ex situ catalytic fast pyrolysis. These configurations and processes represent characteristic pyrolysis processes undergoing intense development currently. Using a comprehensive suite of aqueous-compatible analytical techniques, we quantitatively characterize between 12 g kg -1 of organic carbon of a highly aqueous catalytic fast pyrolysis stream and up to 315 g kg -1 of organic carbon present in the fast pyrolysis aqueous streams. In all cases, the analysis ranges between 75 and 100% of mass closure. The composition and stream properties closely match the nature of pyrolysis processes, with high contents of carbohydrate-derived compounds in the fast pyrolysis aqueous phase, high acid content in nearly all streams, and mostly recalcitrant phenolics in the heavily deoxygenated ex situ catalytic fast pyrolysis stream. Overall, this work provides a detailed compositional analysis of aqueous streams from leading thermochemical processes -- analyses that are critical for subsequent development of selective valorization strategies for these waste streams.« less

Aqueous stream characterization from biomass fast pyrolysis and catalytic fast pyrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Brenna A.; Michener, William E.; Ramirez, Kelsey J.

Here, biomass pyrolysis offers a promising means to rapidly depolymerize lignocellulosic biomass for subsequent catalytic upgrading to renewable fuels. Substantial efforts are currently ongoing to optimize pyrolysis processes including various fast pyrolysis and catalytic fast pyrolysis schemes. In all cases, complex aqueous streams are generated containing solubilized organic compounds that are not converted to target fuels or chemicals and are often slated for wastewater treatment, in turn creating an economic burden on the biorefinery. Valorization of the species in these aqueous streams, however, offers significant potential for substantially improving the economics and sustainability of thermochemical biorefineries. To that end, heremore » we provide a thorough characterization of the aqueous streams from four pilot-scale pyrolysis processes: namely, from fast pyrolysis, fast pyrolysis with downstream fractionation, in situ catalytic fast pyrolysis, and ex situ catalytic fast pyrolysis. These configurations and processes represent characteristic pyrolysis processes undergoing intense development currently. Using a comprehensive suite of aqueous-compatible analytical techniques, we quantitatively characterize between 12 g kg -1 of organic carbon of a highly aqueous catalytic fast pyrolysis stream and up to 315 g kg -1 of organic carbon present in the fast pyrolysis aqueous streams. In all cases, the analysis ranges between 75 and 100% of mass closure. The composition and stream properties closely match the nature of pyrolysis processes, with high contents of carbohydrate-derived compounds in the fast pyrolysis aqueous phase, high acid content in nearly all streams, and mostly recalcitrant phenolics in the heavily deoxygenated ex situ catalytic fast pyrolysis stream. Overall, this work provides a detailed compositional analysis of aqueous streams from leading thermochemical processes -- analyses that are critical for subsequent development of selective valorization strategies for these waste streams.« less

Improvements and Disparities in Types of Foods and Milk Beverages Offered in Elementary School Lunches, 2006–2007 to 2013–2014

PubMed Central

Ohri-Vachaspati, Punam; Powell, Lisa; Chaloupka, Frank J.

2016-01-01

Introduction Children consume much of their daily energy intake at school. School district policies, state laws, and national policies, such as revisions to the US Department of Agriculture’s school meals standards, may affect the types of foods and beverages offered in school lunches over time. Methods This study evaluated changes and disparities in school lunch characteristics from 2006–2007 to 2013–2014. Data were obtained from annual cross-sectional surveys at 4,630 public elementary schools participating in the National School Lunch Program. Multivariate logistic regressions were conducted to examine lunch characteristics. Results The percentage of schools regularly offering healthful items such as vegetables (other than potatoes), fresh fruit, salad bars, whole grains, and more healthful pizzas increased significantly from 2006–2007 to 2013–2014, and the percentage of schools offering less healthful items such as fried potatoes, regular pizza, and high-fat milks decreased significantly. Nevertheless, disparities were evident in 2013–2014. Schools in the West were significantly more likely to offer salad bars than were schools in the Northeast, Midwest, or South (adjusted prevalence: West, 66.3%; Northeast, 22.3%; Midwest, 20.8%; South, 18.3%). Majority-black or majority-Latino schools were significantly less likely to offer fresh fruit than were predominantly white schools (adjusted prevalence: majority black, 61.3%; majority Latino, 73.0%; predominantly white, 87.8%). Schools with low socioeconomic status were significantly less likely to offer salads regularly than were schools with middle or high socioeconomic status (adjusted prevalence: low, 38.5%; middle, 47.4%; high, 59.3%). Conclusion Much progress has been made in improving the quality of school lunches in US public elementary schools, but additional opportunities for improvement remain. PMID:26986542

Mesenchymal Stem Cell Therapy for Nonhealing Cutaneous Wounds

PubMed Central

Hanson, Summer E.; Bentz, Michael L.; Hematti, Peiman

2014-01-01

Summary Chronic wounds remain a major challenge in modern medicine and represent a significant burden, affecting not only physical and mental health, but also productivity, health care expenditure, and long-term morbidity. Even under optimal conditions, the healing process leads to fibrosis or scar. One promising solution, cell therapy, involves the transplantation of progenitor/stem cells to patients through local or systemic delivery, and offers a novel approach to many chronic diseases, including nonhealing wounds. Mesenchymal stem cells are multipotent, adult progenitor cells of great interest because of their unique immunologic properties and regenerative potential. A variety of preclinical and clinical studies have shown that mesenchymal stem cells may have a useful role in wound-healing and tissue-engineering strategies and both aesthetic and reconstructive surgery. Recent advances in stem cell immunobiology can offer insight into the multiple mechanisms through which mesenchymal stem cells could affect underlying pathophysiologic processes associated with nonhealing mesenchymal stem cells. Critical evaluation of the current literature is necessary for understanding how mesenchymal stem cells could potentially revolutionize our approach to skin and soft-tissue defects and designing clinical trials to address their role in wound repair and regeneration. PMID:20124836

Optical processing of MMW for agile beamsteering and beamforming

NASA Astrophysics Data System (ADS)

Sadovnik, Lev

1994-02-01

There is little doubt than an electronically steered, stationary scanning antenna offers significant advantages over any gimbaled installation, especially for tactical missile seekers. A scanning phased array antenna reduces the demands on space and power and makes better use of the space available. It is widely believed that the millimeter wave (MMW) band (W-band) is the region of the RF spectrum which provides the best angular resolution. In fact, MMW sensor and seeker technologies have made significant advances in recent years, demonstrating their suitability for autonomous adverse weather, battlefield, and smart munition applications. Moreover, only the use of the W-band can produce an active seeker with imaging capability for on-board target identification.

Gas storage carbon with enhanced thermal conductivity

DOEpatents

Burchell, Timothy D.; Rogers, Michael Ray; Judkins, Roddie R.

2000-01-01

A carbon fiber carbon matrix hybrid adsorbent monolith with enhanced thermal conductivity for storing and releasing gas through adsorption and desorption is disclosed. The heat of adsorption of the gas species being adsorbed is sufficiently large to cause hybrid monolith heating during adsorption and hybrid monolith cooling during desorption which significantly reduces the storage capacity of the hybrid monolith, or efficiency and economics of a gas separation process. The extent of this phenomenon depends, to a large extent, on the thermal conductivity of the adsorbent hybrid monolith. This invention is a hybrid version of a carbon fiber monolith, which offers significant enhancements to thermal conductivity and potential for improved gas separation and storage systems.

78 FR 56541 - Concept Release on Risk Controls and System Safeguards for Automated Trading Environments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... exchange itself, while proximity hosting indicates services offered by third parties.\\23\\ In 2010, the... offer co-location and/or proximity hosting to offer such services on an equal access basis, ensure that... executed orders, while other personnel provided a range of order, trade processing and back office services...

Translating research and into everyday clinical practice: Lessons learned from a USA national dental practice-based research network

PubMed Central

Gordan, Valeria V.

2012-01-01

Clinical studies are of paramount importance for testing and translation of the research findings to the community. Despite the existence of clinical studies, a significant delay exists between the generation of new knowledge and its application into the medical/dental community and their patients. One example is the repair of defective dental restorations. About 75% of practitioners in general dental practices do not consider the repair of dental restorations as a viable alternative to the replacement of defective restorations. Engaging and partnering with health practitioners in the field on studies addressing everyday clinical research questions may offer a solution to speed up the translation of the research findings. Practice-based research (PBR) offers a unique opportunity for practitioners to be involved in the research process, formulating clinical research questions. Additionally, PBR generates evidence-based knowledge with a broader spectrum that can be more readily generalized to the public. With PBR, clinicians are involved in the entire research process from its inception to its dissemination. Early practitioner interaction in the research process may result in ideas being more readily incorporated into practice. This paper discusses PBR as a mean to speed up the translation of research findings to clinical practice. It also reviews repair versus replacement of defective restorations as one example of the delay in the application of research findings to clinical practice. PMID:22889478

Computational Analysis and Simulation of Empathic Behaviors: a Survey of Empathy Modeling with Behavioral Signal Processing Framework.

PubMed

Xiao, Bo; Imel, Zac E; Georgiou, Panayiotis; Atkins, David C; Narayanan, Shrikanth S

2016-05-01

Empathy is an important psychological process that facilitates human communication and interaction. Enhancement of empathy has profound significance in a range of applications. In this paper, we review emerging directions of research on computational analysis of empathy expression and perception as well as empathic interactions, including their simulation. We summarize the work on empathic expression analysis by the targeted signal modalities (e.g., text, audio, and facial expressions). We categorize empathy simulation studies into theory-based emotion space modeling or application-driven user and context modeling. We summarize challenges in computational study of empathy including conceptual framing and understanding of empathy, data availability, appropriate use and validation of machine learning techniques, and behavior signal processing. Finally, we propose a unified view of empathy computation and offer a series of open problems for future research.

Comparing the temporal dynamics of thematic and taxonomic processing using event-related potentials

PubMed Central

Savic, Olivera; Savic, Andrej M.; Kovic, Vanja

2017-01-01

We report the results of a study comparing the temporal dynamics of thematic and taxonomic knowledge activation in a picture-word priming paradigm using event-related potentials. Although we found no behavioral differences between thematic and taxonomic processing, ERP data revealed distinct patterns of N400 and P600 amplitude modulation for thematic and taxonomic priming. Thematically related target stimuli elicited less negativity than taxonomic targets between 280–460 ms after stimulus onset, suggesting easier semantic processing of thematic than taxonomic relationships. Moreover, P600 mean amplitude was significantly increased for taxonomic targets between 520–600 ms, consistent with a greater need for stimulus reevaluation in that condition. These results offer novel evidence in favor of a dissociation between thematic and taxonomic thinking in the early phases of conceptual evaluation. PMID:29236767

Electron Beam Cured Epoxy Resin Composites for High Temperature Applications

NASA Technical Reports Server (NTRS)

Janke, Christopher J.; Dorsey, George F.; Havens, Stephen J.; Lopata, Vincent J.; Meador, Michael A.

1997-01-01

Electron beam curing of Polymer Matrix Composites (PMC's) is a nonthermal, nonautoclave curing process that has been demonstrated to be a cost effective and advantageous alternative to conventional thermal curing. Advantages of electron beam curing include: reduced manufacturing costs; significantly reduced curing times; improvements in part quality and performance; reduced environmental and health concerns; and improvement in material handling. In 1994 a Cooperative Research and Development Agreement (CRADA), sponsored by the Department of Energy Defense Programs and 10 industrial partners, was established to advance the electron beam curing of PMC technology. Over the last several years a significant amount of effort within the CRADA has been devoted to the development and optimization of resin systems and PMCs that match the performance of thermal cured composites. This highly successful materials development effort has resulted in a board family of high performance, electron beam curable cationic epoxy resin systems possessing a wide range of excellent processing and property profiles. Hundreds of resin systems, both toughened and untoughened, offering unlimited formulation and processing flexibility have been developed and evaluated in the CRADA program.

Superacid Catalyzed Coal Conversion Chemistry. Final Technical Report, September 1, 1983-September 1, 1986

DOE R&D Accomplishments Database

Olah, G. A.

1986-01-01

This research project involved the study of a raw comparatively mild coal conversion process. The goal of the project was to study model systems to understand the basic chemistry involved and to provide a possible effective pretreatment of coal which significantly improves liquefaction-depolymerization under mild conditions. The conversion process operates at relatively low temperatures (170 degrees C) and pressures and uses an easily recyclable, stable superacid catalysts (HF-BF{sub 3}). It consequently offers an attractive alternative to currently available processes. From the present studies it appears that the modification of coal structure by electrophilic alkylation and subsequent reaction of alkylated coal with HF-BF{sub 3}-H{sub 2} system under mild conditions considerably improves the extractability of coal in pyridine and cyclohexane. On the other hand, nitration of coal and its subsequent reaction with HF-BF{sub 3}H{sub 2} decreases the pyridine and cyclohexane extractability. Study of model compounds under conditions identical with the superacidic HF/BF{sub 3}/H{sub 2} system provided significant information about the basic chemistry of the involved cleavage-hydrogenation reactions.

Hello handsome! Male's facial attractiveness gives rise to female's fairness bias in Ultimatum Game scenarios—An ERP study

PubMed Central

2017-01-01

The current study delineated how male proposers’ facial attractiveness affect female responders’ fairness considerations and their subsequent decision outcome during the Ultimatum Game (UG). Event Related Potentials (ERPs) were recorded from 17 female subjects, who played the role as responders and had to decide whether to accept offers from either attractive or unattractive male proposers. Behavioral data (Acceptance Ratio and Response time) revealed that, more offers were accepted from attractive-face conditions; subjects typically responded quicker to unfair offers from unattractive proposers as compared with slower to unfair offers from attractive proposers. The ERP data demonstrated similar N2 amplitudes elicited by both attractive and unattractive faces, and a larger early frontal LPP elicited by the attractive faces compared with unattractive ones, but no significant differences of both late posterior LPP and typical parietal LPP amplitudes were observed between these two face conditions, which was different from our previous study with similar paradigm but male participants. The results suggest that, in comparison to males, females might not experience the potential attention bias towards unattractive opposite-sex faces and are less likely to possess an enhanced processing and evaluation of those faces. This phenomenon might be explained by endogenous gender differences in mate preference. The feedback-related negativity (FRN) and P300 responses during an offer presentation were further measured in both attractive-face and unattractive-face conditions and the results demonstrated that the amplitudes elicited by fair and unfair offers were not statistically different in the former condition, but were different in the latter condition. More specifically, unfair offers generated larger FRN and smaller P300 than fair ones in the unattractive-face condition. Findings suggest that, although females tend to possess less salient evaluation of male’s facial attractiveness, the attractiveness of male proposers would still attenuate female responders’ fairness consideration during the UG. PMID:28678888

Hello handsome! Male's facial attractiveness gives rise to female's fairness bias in Ultimatum Game scenarios-An ERP study.

PubMed

Ma, Qingguo; Qian, Da; Hu, Linfeng; Wang, Lei

2017-01-01

The current study delineated how male proposers' facial attractiveness affect female responders' fairness considerations and their subsequent decision outcome during the Ultimatum Game (UG). Event Related Potentials (ERPs) were recorded from 17 female subjects, who played the role as responders and had to decide whether to accept offers from either attractive or unattractive male proposers. Behavioral data (Acceptance Ratio and Response time) revealed that, more offers were accepted from attractive-face conditions; subjects typically responded quicker to unfair offers from unattractive proposers as compared with slower to unfair offers from attractive proposers. The ERP data demonstrated similar N2 amplitudes elicited by both attractive and unattractive faces, and a larger early frontal LPP elicited by the attractive faces compared with unattractive ones, but no significant differences of both late posterior LPP and typical parietal LPP amplitudes were observed between these two face conditions, which was different from our previous study with similar paradigm but male participants. The results suggest that, in comparison to males, females might not experience the potential attention bias towards unattractive opposite-sex faces and are less likely to possess an enhanced processing and evaluation of those faces. This phenomenon might be explained by endogenous gender differences in mate preference. The feedback-related negativity (FRN) and P300 responses during an offer presentation were further measured in both attractive-face and unattractive-face conditions and the results demonstrated that the amplitudes elicited by fair and unfair offers were not statistically different in the former condition, but were different in the latter condition. More specifically, unfair offers generated larger FRN and smaller P300 than fair ones in the unattractive-face condition. Findings suggest that, although females tend to possess less salient evaluation of male's facial attractiveness, the attractiveness of male proposers would still attenuate female responders' fairness consideration during the UG.

A stable solution-processed polymer semiconductor with record high-mobility for printed transistors

PubMed Central

Li, Jun; Zhao, Yan; Tan, Huei Shuan; Guo, Yunlong; Di, Chong-An; Yu, Gui; Liu, Yunqi; Lin, Ming; Lim, Suo Hon; Zhou, Yuhua; Su, Haibin; Ong, Beng S.

2012-01-01

Microelectronic circuits/arrays produced via high-speed printing instead of traditional photolithographic processes offer an appealing approach to creating the long-sought after, low-cost, large-area flexible electronics. Foremost among critical enablers to propel this paradigm shift in manufacturing is a stable, solution-processable, high-performance semiconductor for printing functionally capable thin-film transistors — fundamental building blocks of microelectronics. We report herein the processing and optimisation of solution-processable polymer semiconductors for thin-film transistors, demonstrating very high field-effect mobility, high on/off ratio, and excellent shelf-life and operating stabilities under ambient conditions. Exceptionally high-gain inverters and functional ring oscillator devices on flexible substrates have been demonstrated. This optimised polymer semiconductor represents a significant progress in semiconductor development, dispelling prevalent skepticism surrounding practical usability of organic semiconductors for high-performance microelectronic devices, opening up application opportunities hitherto functionally or economically inaccessible with silicon technologies, and providing an excellent structural framework for fundamental studies of charge transport in organic systems. PMID:23082244

Data Processing of LAPAN-A3 Thermal Imager

NASA Astrophysics Data System (ADS)

Hartono, R.; Hakim, P. R.; Syafrudin, AH

2018-04-01

As an experimental microsatellite, LAPAN-A3/IPB satellite has an experimental thermal imager, which is called as micro-bolometer, to observe earth surface temperature for horizon observation. The imager data is transmitted from satellite to ground station by S-band video analog signal transmission, and then processed by ground station to become sequence of 8-bit enhanced and contrasted images. Data processing of LAPAN-A3/IPB thermal imager is more difficult than visual digital camera, especially for mosaic and classification purpose. This research aims to describe simple mosaic and classification process of LAPAN-A3/IPB thermal imager based on several videos data produced by the imager. The results show that stitching using Adobe Photoshop produces excellent result but can only process small area, while manual approach using ImageJ software can produce a good result but need a lot of works and time consuming. The mosaic process using image cross-correlation by Matlab offers alternative solution, which can process significantly bigger area in significantly shorter time processing. However, the quality produced is not as good as mosaic images of the other two methods. The simple classifying process that has been done shows that the thermal image can classify three distinct objects, i.e.: clouds, sea, and land surface. However, the algorithm fail to classify any other object which might be caused by distortions in the images. All of these results can be used as reference for development of thermal imager in LAPAN-A4 satellite.

Terahertz (THZ) Imaging

DTIC Science & Technology

2006-03-01

work in image processing for CWD and other security-related imaging with visual, x - ray , infrared and millimeter wave imagery was seen as a jumping-off...advantage of the fact that, unlike x - rays which offer only magnitude information, THz offers phase information. as well. While the magnitude contains...perspective are analyzed, specially compared with X - ray process tomography system. 5. Gregory, I.S.; Tribe, W.R.; Cole, B.E.; Baker, C.; Evans, M.J

The WorkPlace distributed processing environment

NASA Technical Reports Server (NTRS)

Ames, Troy; Henderson, Scott

1993-01-01

Real time control problems require robust, high performance solutions. Distributed computing can offer high performance through parallelism and robustness through redundancy. Unfortunately, implementing distributed systems with these characteristics places a significant burden on the applications programmers. Goddard Code 522 has developed WorkPlace to alleviate this burden. WorkPlace is a small, portable, embeddable network interface which automates message routing, failure detection, and re-configuration in response to failures in distributed systems. This paper describes the design and use of WorkPlace, and its application in the construction of a distributed blackboard system.

NASA's Technology Transfer Program for the Early Detection of Breast Cancer

NASA Technical Reports Server (NTRS)

Schmidt, Gregory; Frey, Mary Anne; Vernikos, Joan; Winfield, Daniel; Dalton, Bonnie P. (Technical Monitor)

1996-01-01

The National Aeronautics and Space Administration (NASA) has led the development of advanced imaging sensors and image processing technologies for space science and Earth science missions. NASA considers the transfer and commercialization of such technologies a fundamental mission of the agency. Over the last two years, efforts have been focused on the application of aerospace imaging and computing to the field of diagnostic imaging, specifically to breast cancer imaging. These technology transfer efforts offer significant promise in helping in the national public health priority of the early detection of breast cancer.

Pathogenesis of Crohn's disease

PubMed Central

Boyapati, Ray; Satsangi, Jack

2015-01-01

Significant progress in our understanding of Crohn's disease (CD), an archetypal common, complex disease, has now been achieved. Our ability to interrogate the deep complexities of the biological processes involved in maintaining gut mucosal homeostasis is a major over-riding factor underpinning this rapid progress. Key studies now offer many novel and expansive insights into the interacting roles of genetic susceptibility, immune function, and the gut microbiota in CD. Here, we provide overviews of these recent advances and new mechanistic themes, and address the challenges and prospects for translation from concept to clinic. PMID:26097717

Beyond Fourier.

PubMed

Hoch, Jeffrey C

2017-10-01

Non-Fourier methods of spectrum analysis are gaining traction in NMR spectroscopy, driven by their utility for processing nonuniformly sampled data. These methods afford new opportunities for optimizing experiment time, resolution, and sensitivity of multidimensional NMR experiments, but they also pose significant challenges not encountered with the discrete Fourier transform. A brief history of non-Fourier methods in NMR serves to place different approaches in context. Non-Fourier methods reflect broader trends in the growing importance of computation in NMR, and offer insights for future software development. Copyright © 2017 Elsevier Inc. All rights reserved.

Methane storage in metal-organic frameworks.

PubMed

He, Yabing; Zhou, Wei; Qian, Guodong; Chen, Banglin

2014-08-21

Natural gas (NG), whose main component is methane, is an attractive fuel for vehicular applications. Realization of safe, cheap and convenient means and materials for high-capacity methane storage can significantly facilitate the implementation of natural gas fuelled vehicles. The physisorption based process involving porous materials offers an efficient storage methodology and the emerging porous metal-organic frameworks have been explored as potential candidates because of their extraordinarily high porosities, tunable pore/cage sizes and easily immobilized functional sites. In this view, we provide an overview of the current status of metal-organic frameworks for methane storage.

Implementation of Wireless Terminals at Farmers’ Markets: Impact on SNAP Redemption and Overall Sales

PubMed Central

Bertmann, Farryl M. W.; Ohri-Vachaspati, Punam; Buman, Matthew P.

2012-01-01

Although farmers’ markets offer healthy foods for purchase, many lack the equipment necessary to process convenient, card-based transactions. We assessed the impact of providing wireless terminals to 5 markets on overall sales and redemption of Supplemental Nutrition Assistance Program (SNAP) benefits. Sales increased significantly at 4 of the 5 markets after implementation of the terminals, and overall sales increased above and beyond SNAP redemption alone. Implementation of wireless terminals may be important for improving the financial stability and accessibility of farmers’ markets. PMID:22594725

Preferences in Data Production Planning

NASA Technical Reports Server (NTRS)

Golden, Keith; Brafman, Ronen; Pang, Wanlin

2005-01-01

This paper discusses the data production problem, which consists of transforming a set of (initial) input data into a set of (goal) output data. There are typically many choices among input data and processing algorithms, each leading to significantly different end products. To discriminate among these choices, the planner supports an input language that provides a number of constructs for specifying user preferences over data (and plan) properties. We discuss these preference constructs, how we handle them to guide search, and additional challenges in the area of preference management that this important application domain offers.

Physician input: a critical strategic-planning tool.

PubMed

Rovinsky, Michael

2002-01-01

To establish effective working relationships with medical staff and community physicians, an IDS must adopt a strategic-planning approach that adequately incorporates physicians' needs and expectations. Research shows that most physicians considered the IDS's market position, the degree to which the IDS can offer physicians practice-enhancing capabilities, and physician involvement in IDS governance to be critical factors for the success of an IDS. By establishing a meaningful role for physicians in the organizational strategic-planning process, an IDS can significantly improve its market position and its relationships with physicians.

Plasma filtering techniques for nuclear waste remediation.

PubMed

Gueroult, Renaud; Hobbs, David T; Fisch, Nathaniel J

2015-10-30

Nuclear waste cleanup is challenged by the handling of feed stocks that are both unknown and complex. Plasma filtering, operating on dissociated elements, offers advantages over chemical methods in processing such wastes. The costs incurred by plasma mass filtering for nuclear waste pretreatment, before ultimate disposal, are similar to those for chemical pretreatment. However, significant savings might be achieved in minimizing the waste mass. This advantage may be realized over a large range of chemical waste compositions, thereby addressing the heterogeneity of legacy nuclear waste. Copyright © 2015 Elsevier B.V. All rights reserved.

Application of CRAFT (complete reduction to amplitude frequency table) in nonuniformly sampled (NUS) 2D NMR data processing.

PubMed

Krishnamurthy, Krish; Hari, Natarajan

2017-09-15

The recently published CRAFT (complete reduction to amplitude frequency table) technique converts the raw FID data (i.e., time domain data) into a table of frequencies, amplitudes, decay rate constants, and phases. It offers an alternate approach to decimate time-domain data, with minimal preprocessing step. It has been shown that application of CRAFT technique to process the t 1 dimension of the 2D data significantly improved the detectable resolution by its ability to analyze without the use of ubiquitous apodization of extensively zero-filled data. It was noted earlier that CRAFT did not resolve sinusoids that were not already resolvable in time-domain (i.e., t 1 max dependent resolution). We present a combined NUS-IST-CRAFT approach wherein the NUS acquisition technique (sparse sampling technique) increases the intrinsic resolution in time-domain (by increasing t 1 max), IST fills the gap in the sparse sampling, and CRAFT processing extracts the information without loss due to any severe apodization. NUS and CRAFT are thus complementary techniques to improve intrinsic and usable resolution. We show that significant improvement can be achieved with this combination over conventional NUS-IST processing. With reasonable sensitivity, the models can be extended to significantly higher t 1 max to generate an indirect-DEPT spectrum that rivals the direct observe counterpart. Copyright © 2017 John Wiley & Sons, Ltd.

12 CFR Appendix A to Subpart I of... - Examples of Mortgage Loan Originator Activities

Code of Federal Regulations, 2013 CFR

2013-01-01

... loan process; or (D) Only the rate approved by the bank's loan approval mechanism function for a... details of that offer. (c) Offering or negotiating a loan for compensation or gain. The following examples illustrate when an employee does or does not offer or negotiate terms of a loan “for compensation or gain...

12 CFR Appendix A to Subpart I of... - Examples of Mortgage Loan Originator Activities

Code of Federal Regulations, 2012 CFR

2012-01-01

... loan process; or (D) Only the rate approved by the bank's loan approval mechanism function for a... details of that offer. (c) Offering or negotiating a loan for compensation or gain. The following examples illustrate when an employee does or does not offer or negotiate terms of a loan “for compensation or gain...

12 CFR Appendix A to Subpart I of... - Examples of Mortgage Loan Originator Activities

Code of Federal Regulations, 2011 CFR

2011-01-01

... loan process; or (D) Only the rate approved by the bank's loan approval mechanism function for a... details of that offer. (c) Offering or negotiating a loan for compensation or gain. The following examples illustrate when an employee does or does not offer or negotiate terms of a loan “for compensation or gain...

12 CFR Appendix A to Subpart I of... - Examples of Mortgage Loan Originator Activities

Code of Federal Regulations, 2014 CFR

2014-01-01

... loan process; or (D) Only the rate approved by the bank's loan approval mechanism function for a... details of that offer. (c) Offering or negotiating a loan for compensation or gain. The following examples illustrate when an employee does or does not offer or negotiate terms of a loan “for compensation or gain...

Suppression of persistent photo-conductance in solution-processed amorphous oxide thin-film transistors

NASA Astrophysics Data System (ADS)

Lee, Minkyung; Kim, Minho; Jo, Jeong-Wan; Park, Sung Kyu; Kim, Yong-Hoon

2018-01-01

This study offers a combinatorial approach for suppressing the persistent photo-conductance (PPC) characteristic in solution-processed amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) in order to achieve rapid photo-recovery. Various analyses were used to examine the photo-instability of indium-gallium-zinc-oxide (IGZO) TFTs including negative-bias-illumination-stress (NBIS) and transient photo-response behaviors. It was found that the indium ratio in metallic components had a significant impact on their PPC and photo-recovery characteristics. In particular, when the indium ratio was low (51.5%), the PPC characteristic was significantly suppressed and achieving rapid photo-recovery was possible without significantly affecting the electrical performance of AOSs. These results imply that the optimization of the indium composition ratio may allow achieving highly photo-stable and near PPC-free characteristics while maintaining high electrical performance of AOSs. It is considered that the negligible PPC behavior and rapid photo-recovery observed in IGZO TFTs with a lower indium composition are attributed to the less activation energy required for the neutralization of ionized oxygen vacancies.

Investigating the effect of nurse-team communication on nurse turnover: relationships among communication processes, identification, and intent to leave.

PubMed

Apker, Julie; Propp, Kathleen M; Ford, Wendy S Zabava

2009-03-01

Enhanced team communication may strengthen nurses' attachment to their organizations and teams and improve nurse retention. This study examines the relationships among nurse-team communication, identification (organizational and team), and intent to leave. Hospital nurses (N = 201) completed surveys measuring 3 nurse-team communication processes: promoting team synergy, ensuring quality decisions, and individualizing communication. Hierarchical regression analyses revealed that promoting team synergy was a significant predictor of intent to leave, whereas ensuring quality decisions and individualizing communication did not account for significant additional variance in intent to leave. Separate analyses showed that the relationship between promoting team synergy and intent to leave was partially mediated by team identification or by organizational identification. Further analyses were conducted on the 7 communication practices for promoting team synergy. Mentoring emerged as the only significant predictor of intent to leave; however, its relationship to intent to leave was fully mediated by organizational identification or partially mediated by team identification. Pragmatic suggestions are offered to improve nurse identification and reduce turnover.

GRAPEVINE: Grids about anything by Poisson's equation in a visually interactive networking environment

NASA Technical Reports Server (NTRS)

Sorenson, Reese L.; Mccann, Karen

1992-01-01

A proven 3-D multiple-block elliptic grid generator, designed to run in 'batch mode' on a supercomputer, is improved by the creation of a modern graphical user interface (GUI) running on a workstation. The two parts are connected in real time by a network. The resultant system offers a significant speedup in the process of preparing and formatting input data and the ability to watch the grid solution converge by replotting the grid at each iteration step. The result is a reduction in user time and CPU time required to generate the grid and an enhanced understanding of the elliptic solution process. This software system, called GRAPEVINE, is described, and certain observations are made concerning the creation of such software.

Evaluation of recruitment and selection for specialty training in public health: interim results of a prospective cohort study to measure the predictive validity of the selection process.

PubMed

Pashayan, Nora; Gray, Selena; Duff, Celia; Parkes, Julie; Williams, David; Patterson, Fiona; Koczwara, Anna; Fisher, Grant; Mason, Brendan W

2016-06-01

The recruitment process for public health specialty training includes an assessment centre (AC) with three components, Rust Advanced Numerical Reasoning Appraisal (RANRA), Watson-Glaser Critical Thinking Appraisal (WGCT) and a Situation Judgement Test (SJT), which determines invitation to a selection centre (SC). The scores are combined into a total recruitment (TR) score that determines the offers of appointment. A prospective cohort study using anonymous record linkage to investigate the association between applicant's scores in the recruitment process and registrar's progress through training measured by results of Membership Faculty Public Health (MFPH) examinations and outcomes of the Annual Review of Competence Progression (ARCP). Higher scores in RANRA, WGCT, AC, SC and TR were all significantly associated with higher adjusted odds of passing Part A MFPH exam at the first attempt. Higher scores in AC, SC and TR were significantly associated with passing Part B exam at the first attempt. Higher scores in SJT, AC and SC were significantly associated with satisfactory ARCP outcomes. The current UK national recruitment and selection process for public health specialty training has good predictive validity. The individual components of the process are testing different skills and abilities and together they are providing additive value. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Acceleration of GPU-based Krylov solvers via data transfer reduction

DOE PAGES

Anzt, Hartwig; Tomov, Stanimire; Luszczek, Piotr; ...

2015-04-08

Krylov subspace iterative solvers are often the method of choice when solving large sparse linear systems. At the same time, hardware accelerators such as graphics processing units continue to offer significant floating point performance gains for matrix and vector computations through easy-to-use libraries of computational kernels. However, as these libraries are usually composed of a well optimized but limited set of linear algebra operations, applications that use them often fail to reduce certain data communications, and hence fail to leverage the full potential of the accelerator. In this study, we target the acceleration of Krylov subspace iterative methods for graphicsmore » processing units, and in particular the Biconjugate Gradient Stabilized solver that significant improvement can be achieved by reformulating the method to reduce data-communications through application-specific kernels instead of using the generic BLAS kernels, e.g. as provided by NVIDIA’s cuBLAS library, and by designing a graphics processing unit specific sparse matrix-vector product kernel that is able to more efficiently use the graphics processing unit’s computing power. Furthermore, we derive a model estimating the performance improvement, and use experimental data to validate the expected runtime savings. Finally, considering that the derived implementation achieves significantly higher performance, we assert that similar optimizations addressing algorithm structure, as well as sparse matrix-vector, are crucial for the subsequent development of high-performance graphics processing units accelerated Krylov subspace iterative methods.« less

Product development using process monitoring and NDE data fusion

NASA Astrophysics Data System (ADS)

Peterson, Todd; Bossi, Richard H.

1998-03-01

Composite process/product development relies on both process monitoring information and nondestructive evaluation measurements for determining application suitability. In the past these activities have been performed and analyzed independently. Our present approach is to present the process monitoring and NDE data together in a data fusion workstation. This methodology leads to final product acceptance based on a combined process monitoring and NDE criteria. The data fusion work station combines process parameter and NDE data in a single workspace enabling all the data to be used in the acceptance/rejection decision process. An example application is the induction welding process, a unique joining method for assembling primary composite structure, that offers significant cost and weight advantages over traditional fasted structure. The determination of the required time, temperature and pressure conditions used in the process to achieve a complete weld is being aided by the use of ultrasonic inspection techniques. Full waveform ultrasonic inspection data is employed to evaluate the quality of spar cap to skin fit, an essential element of the welding process, and is processed to find a parameter that can be used for weld acceptance. Certification of the completed weld incorporates the data fusion methodology.

Investigation of polymer derived ceramics cantilevers for application of high speed atomic force microscopy

NASA Astrophysics Data System (ADS)

Wu, Chia-Yun

High speed Atomic Force Microscopy (AFM) has a wide variety of applications ranging from nanomanufacturing to biophysics. In order to have higher scanning speed of certain AFM modes, high resonant frequency cantilevers are needed; therefore, the goal of this research is to investigate using polymer derived ceramics for possible applications in making high resonant frequency AFM cantilevers using complex cross sections. The polymer derived ceramic that will be studied, is silicon carbide. Polymer derived ceramics offer a potentially more economic fabrication approach for MEMS due to their relatively low processing temperatures and ease of complex shape design. Photolithography was used to make the desired cantilever shapes with micron scale size followed by a wet etching process to release the cantilevers from the substrates. The whole manufacturing process we use borrow well-developed techniques from the semiconducting industry, and as such this project also could offer the opportunity to reduce the fabrication cost of AFM cantilevers and MEMS in general. The characteristics of silicon carbide made from the precursor polymer, SMP-10 (Starfire Systems), were studied. In order to produce high qualities of silicon carbide cantilevers, where the major concern is defects, proper process parameters needed to be determined. Films of polymer derived ceramics often have defects due to shrinkage during the conversion process. Thus control of defects was a central issue in this study. A second, related concern was preventing oxidation; the polymer derived ceramics we chose is easily oxidized during processing. Establishing an environment without oxygen in the whole process was a significant challenge in the project. The optimization of the parameters for using photolithography and wet etching process was the final and central goal of the project; well established techniques used in microfabrication were modified for use in making the cantilever in the project. The techniques developed here open a path to the fabrication of cantilevers with unconventional cross sections.

Unravelling the influence of mild traumatic brain injury (MTBI) on cognitive-linguistic processing: a comparative group analysis.

PubMed

Barwood, Caroline H S; Murdoch, Bruce E

2013-06-01

Cognitive-linguistic deficits often accompany traumatic brain injury (TBI) and can negatively impact communicative competency. The linguistic sequelae underpinning mild TBI (MTBI) remain largely unexplored in contemporary literature. The present research methods aim to provide group evidence pertaining to the influence of MTBI on linguistic and higher-level language processing. Extrapolating on the findings of recent case reports, it is hypothesized that performance of the MTBI patients will be significantly reduced compared to normal controls performance on the employed high-level linguistic tasks. Sixteen patients with MTBI and 16 age- and education-matched normal control participants were assessed using a comprehensive battery of cognitive-linguistic assessments. The results demonstrated statistically significant differences between MTBI and normal control group performance across a number of higher-level linguistic, general cognitive and general language tasks. MTBI group performance was significantly lower than the normal control group on tasks requiring complex lexical semantic operations and memory demands, including: Recall, organization, making inferences, naming and perception/discrimination. These outcomes confer that post-MTBI, cognitive, high-level language and isolated general language performance (e.g. naming) is significantly reduced in MTBI patients, compared to normal controls. Furthermore, the detailed cognitive-linguistic profile offered provides a necessary direction for the identification of areas of linguistic decline in MTBI and targets for therapeutic intervention of impaired cognitive-linguistic processes to ultimately improve communicative outcomes in MTBI.

A longitudinal evaluation of a project-based learning initiative in an engineering undergraduate programme

NASA Astrophysics Data System (ADS)

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-05-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier evaluation conducted after the initial offering of the unit. It considers the implementation of the recommended changes. Evaluations of the two offerings reveal that students (in both the initial and second offering) generally enjoyed the experience, but that the second offering was found to be a significantly more enjoyable learning experience. Students in the second offering also reported a significantly better understanding of what they needed to do for the design projects and where to find the requisite information. The oral presentation aspect of the initial and second offerings received the lowest satisfaction rating. The inclusion (and delivery) of the computer-aided drawing component of the unit is seen as a positive aspect by some students, but many others comment on it negatively. The best aspects of the PBL unit and those aspects needing further improvement were similar to the findings of other investigations documented in the literature.

Alternative Fuels Data Center: California Ramps Up Biofuels Infrastructure

Science.gov Websites

providers are able to offer station owners turn-key packages, complete with tanks and dispensers, with a , and helping to streamline permitting processes. Today, fuel providers are able to offer station owners

Integrated monitoring technologies for the management of a Soil-Aquifer-Treatment (SAT) system.

NASA Astrophysics Data System (ADS)

Papadopoulos, Alexandros; Kallioras, Andreas; Kofakis, Petros; Bumberger, Jan; Schmidt, Felix; Athanasiou, Georgios; Uzunoglou, Nikolaos; Amditis, Angelos; Dietrich, Peter

2016-04-01

Artificial recharge of groundwater has an important role to play in water reuse as treated wastewater effluent can be infiltrated into the ground for aquifer recharge. As the effluent moves through the soil and the aquifer, it undergoes significant quality improvements through physical, chemical, and biological processes in the underground environment. Collectively, these processes and the water quality improvement obtained are called soil-aquifer-treatment (SAT) or geopurification. The pilot site of Lavrion Technological & Cultural Park (LTCP) of the National Technical University of Athens (NTUA), involves the employment of plot infiltration basins at experimental scale, which will be using waters of impaired quality as a recharge source, and hence acting as a Soil-Aquifer-Treatment, SAT, system. Τhe LTCP site will be employed as a pilot SAT system complemented by new technological developments, which will be providing continuous monitoring of the quantitative and qualitative characteristics of infiltrating groundwater through all hydrologic zones (i.e. surface, unsaturated and saturated zone). This will be achieved by the development and installation of an integrated system of prototype sensing technologies, installed on-site, and offering a continuous evaluation of the performance of the SAT system. An integrated approach of the performance evaluation of any operating SAT system should aim at parallel monitoring of all hydrologic zones, proving the sustainability of all involved water quality treatment processes within unsaturated and saturated zone. Hence a prototype system of Time and Frequency Domain Reflectometry (TDR & FDR) sensors is developed and will be installed, in order to achieve continuous quantitative monitoring of the unsaturated zone through the entire soil column down to significant depths below the SAT basin. Additionally, the system contains two different radar-based sensing systems that will be offering (i) identification of preferential flow effects of the TDR/FDR sensors and (ii) monitoring of the water table within the shallow karst aquifer layer. The above technique will offer continuous monitoring of infiltration rates and identify possible mechanical or biological clogging effects. The monitoring system will be connected to an ad-hoc wireless network for continuous data transfer within the SAT facilities. It is envisaged that the development and combined application of all the above technologies will provide an integrated monitoring platform for the evaluation of SAT system performance.

Laser 3D micro-manufacturing

NASA Astrophysics Data System (ADS)

Piqué, Alberto; Auyeung, Raymond C. Y.; Kim, Heungsoo; Charipar, Nicholas A.; Mathews, Scott A.

2016-06-01

Laser-based materials processing techniques are gaining widespread use in micro-manufacturing applications. The use of laser microfabrication techniques enables the processing of micro- and nanostructures from a wide range of materials and geometries without the need for masking and etching steps commonly associated with photolithography. This review aims to describe the broad applications space covered by laser-based micro- and nanoprocessing techniques and the benefits offered by the use of lasers in micro-manufacturing processes. Given their non-lithographic nature, these processes are also referred to as laser direct-write and constitute some of the earliest demonstrations of 3D printing or additive manufacturing at the microscale. As this review will show, the use of lasers enables precise control of the various types of processing steps—from subtractive to additive—over a wide range of scales with an extensive materials palette. Overall, laser-based direct-write techniques offer multiple modes of operation including the removal (via ablative processes) and addition (via photopolymerization or printing) of most classes of materials using the same equipment in many cases. The versatility provided by these multi-function, multi-material and multi-scale laser micro-manufacturing processes cannot be matched by photolithography nor with other direct-write microfabrication techniques and offer unique opportunities for current and future 3D micro-manufacturing applications.

Relationship of impaired processing speed and flexibility of abstract thought to improvements in work performance over time in schizophrenia.

PubMed

Lysaker, Paul H; Bryson, Gary J; Davis, Louanne W; Bell, Morris D

2005-06-15

Vocational impairments in schizophrenia have been widely linked to deficits in neurocognition. This study examined the possibility that deficits in visuomotor processing speed and flexibility in abstract thought may in combination be an especially potent risk factor for poorer levels of work performance in rehabilitation. Fifty-seven participants with confirmed diagnoses of schizophrenia spectrum disorders were administered the Digit Symbol Subtest and the Wisconsin Card Sorting Test and then offered work placements in a vocational rehabilitation program. Work performance was assessed biweekly over two months using the Work Behavior Inventory. Multivariate and univariate repeated ANOVA revealed that participants classified as having no impairments in either visuomotor processing speed and flexibility in abstract thought (n=14) had superior work performance compared to participants with deficits in either one area (n=20) or both areas (n=23). Additionally, participants with no impairments were the only group to show significant improvement in work performance over 7 weeks of rehabilitation. Participants with only one deficit had significantly better work performance than participants with both deficits but showed no statistically significant improvement in work performance. Results suggest assessments of these domains of neurocognition may provide important information about individual needs for adjunct services.

[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

PubMed

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

Changes in School Food Preparation Methods Result in Healthier Cafeteria Lunches in Elementary Schools.

PubMed

Behrens, Timothy K; Liebert, Mina L; Peterson, Hannah J; Howard Smith, Jennifer; Sutliffe, Jay T; Day, Aubrey; Mack, Jodi

2018-05-01

The purpose of this study is to examine the impact of a districtwide food best practices and preparation changes in elementary schools lunches, implemented as part of the LiveWell@School childhood obesity program, funded by LiveWell Colorado/Kaiser Permanente Community Health Initiative. Longitudinal study examining how school changes in best practices for food preparation impacted the types of side items offered from 2009 to 2015 in elementary school cafeterias in a high-need school district in southern Colorado. Specifically, this study examined changes in side items (fruits, vegetables, potatoes, breads, and desserts). In Phase 1 (2009-2010), baseline data were collected. During Phase 2 (2010-2011), breaded and processed foods (e.g., frozen nuggets, pre-packaged pizza) were removed and school chefs were trained on scratch cooking methods. Phase 3 (2011-2012) saw an increased use of fresh/frozen fruits and vegetables after a new commodity order. During Phase 4 (2013-2015), chef consulting and training took place. The frequency of side offerings was tracked across phases. Analyses were completed in Fall 2016. Because of limited sample sizes, data from Phases 2 to 4 (intervention phases) were combined for potatoes and desserts. Descriptive statistics were calculated. After adjusting for length of time for each phase, Pearson chi-square tests were conducted to examine changes in offerings of side items by phase. Fresh fruit offerings increased and canned fruit decreased in Phases 1-4 (p=0.001). A significant difference was observed for vegetables (p=0.001), with raw and steamed vegetables increasing and canned vegetables decreasing from Phase 1 to 4. Fresh potatoes (low in sodium) increased and fried potatoes (high in sodium) decreased from Phase 1 to Phases 2-4 (p=0.001). Breads were eliminated entirely in Phase 2, and dessert changes were not significant (p=0.927). This approach to promoting healthier lunch sides is a promising paradigm for improving elementary cafeteria food offerings. This article is part of a supplement entitled Building Thriving Communities Through Comprehensive Community Health Initiatives, which is sponsored by Kaiser Permanente, Community Health. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Retiree health benefits: availability from employers and participation by employees.

PubMed

Loprest, P

1998-12-01

Data from the September 1994 Current Population Survey are used to examine the factors associated with early retirees' access to offers of retiree health insurance (RHI) and their likelihood of accepting these offers. I find large differences in offer rates, with those with pensions and from large firms much more likely to receive an offer, and women and non-Whites less likely. Even among those with an offer of RHI, more than a quarter do not accept the offer. Early retirees who have lower incomes and lack pensions are significantly less likely to accept an offer of RHI, suggesting that policies that increase offers are not sufficient to increase coverage for early retirees. Barriers to accepting offers need to be considered.

Improvements and important considerations for the 5-choice serial reaction time task-An effective measurement of visual attention in rats.

PubMed

Bhandari, Jayant; Daya, Ritesh; Mishra, Ram K

2016-09-01

The 5-choice serial reaction time task (5-CSRTT) is an automated operant conditioning task that measures rodent attention. The task allows the measurement of several parameters such as response accuracy, speed of processing, motivation, and impulsivity. The task has been widely used to investigate attentional processes in rodents for attention deficit and hyperactivity disorder and has expanded to other illnesses such as Alzheimer's disease, depression, and schizophrenia. The 5-CSRTT is accompanied with two significant caveats: a time intensive training period and largely varied individual rat capability to learn and perform the task. Here we provide a regimented acquisition protocol to enhance training for the 5-CSRTT and discuss important considerations for researchers using the 5-CSRTT. We offer guidelines to ensure that inferences on performance in the 5-CSRTT are in fact a result of experimental manipulation rather than training differences, or individual animal capability. According to our findings only rats that have been trained successfully within a limited time frame should be used for the remainder of the study. Currently the 5-CSRTT employs a training period of variable duration and procedure, and its inferences on attention must overcome heterogeneous innate animal differences. The 5-CSRTT offers valuable and valid insights on various rodent attentional processes and their translation to the underpinnings of illnesses such as schizophrenia. The recommendations made here provide important criteria to ensure inferences made from this task are in fact relevant to the attentional processes being measured. Copyright © 2016 Elsevier B.V. All rights reserved.

Cryogenic reactant storage for lunar base regenerative fuel cells

NASA Technical Reports Server (NTRS)

Kohout, Lisa L.

1989-01-01

There are major advantages to be gained by integrating a cryogenic reactant storage system with a hydrogen-oxygen regenerative fuel cell (RFC) to provide on-site electrical power during the lunar night. Although applicable to any power system using hydrogen-oxygen RFC's for energy storage, cryogenic reactant storage offers a significant benefit whenever the sun/shade cycle and energy storage period approach hundreds of hours. For solar power installations on the moon, cryogenic reactant storage reduces overall specific mass and meteoroid vulnerability of the system. In addition, it offers synergistic benefits to on-site users, such as availability of primary fuel cell reactants for surface rover vehicles and cryogenic propellants for OTV's. The integration involves processing and storing the RFC reactant streams as cryogenic liquids rather than pressurized gases, so that reactant containment (tankage per unit mass of reactants) can be greatly reduced. Hydrogen-oxygen alkaline RFC's, GaAs photovoltaic (PV) arrays, and space cryogenic processing/refrigeration technologies are assumed to be available for the conceptual system design. Advantages are demonstrated by comparing the characteristics of two power system concepts: a conventional lunar surface PV/RFC power system using pressurized gas storage in SOA filament wound pressure vessels and, that same system with gas liquefaction and storage replacing the pressurized storage. Comparisons are made at 20 and 250 kWe. Although cryogenic storage adds a processing plant (drying and liquefaction) to the system plus 30 percent more solar array to provide processing power, the approximate order of magnitude reduction in tankage mass, confirmed by this analysis, results in a reduction in overall total system mass of approximately 50 percent.

Implementation of a quality improvement programme to support advance care planning in five hospitals across a health region.

PubMed

Schofield, G; Kreeger, L; Meyer, M; Swann, D; Wijeratne, A; Wood, J; Stone, P

2015-03-01

Advance care planning (ACP) can help patients with a terminal illness to prepare for the end of their lives. This report describes a regional service improvement initiative to increase the identification of hospital inpatients at this stage in their illnesses and to increase the number of such patients who are offered the opportunity to start the process of ACP. Data were collected prospectively over a 7 month period from four acute hospital trusts and a specialist cancer centre in the South-West London region. Each unit identified a specific patient population who were screened for eligibility to engage in the process of ACP. Data concerning the reasons for eligibility, the suitability for discussion and the various reasons why patients did not complete the process, were recorded. Over a 7 month period 1980 patients were screened and 559 (28.2%) were found to be potentially eligible for an ACP discussion. Of these 227/559 (40.6%) were deemed suitable for a discussion by medical staff. The majority of these patients (195/227; 86%) were offered the opportunity to undergo ACP discussions and 144/195 (73.8%) agreed to begin the process of ACP. This report shows that a targeted approach can result in increased uptake in the number of patients who engage in ACP. However, systematic identification of potentially eligible patients requires a significant investment of clinical time and resources. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Resident choice and the survey process: the need for standardized observation and transparency.

PubMed

Schnelle, John F; Bertrand, Rosanna; Hurd, Donna; White, Alan; Squires, David; Feuerberg, Marvin; Hickey, Kelly; Simmons, Sandra F

2009-08-01

To describe a standardized observation protocol to determine if nursing home (NH) staff offer choice to residents during 3 morning activities of daily living (ADL) and compare the observational data with deficiency statements cited by state survey staff. Morning ADL care was observed in 20 NHs in 5 states by research staff using a standardized observation protocol. The number of observations in which choice was not offered was documented for 3 morning ADL care activities and compared with deficiency statements made by surveyors. Staff failed to offer choice during morning ADL care delivery for at least 1 of 3 ADL care activities in all 20 NHs. Observational data showed residents were not offered choice about when to get out of bed (11%), what to wear (25%), and breakfast dining location (39%). In comparison, survey staff issued only 2 deficiencies in all 20 NHs relevant to choice in the targeted ADL care activities, and neither deficiency was based on observational data. Survey interpretative guidelines instruct surveyors to observe if residents are offered choice during daily care provision, but standardized observation protocols are not provided to surveyors to make this determination. The use of a standardized observation protocol in the survey process similar to that used by research staff in this study would improve the accuracy and transparency of the survey process.

30 CFR 285.215 - What areas will MMS offer in a lease sale?

Code of Federal Regulations, 2010 CFR

2010-07-01

... RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases Competitive Lease Process § 285.215 What areas will MMS offer in a lease sale? The...

The impact of simulation sequencing on perceived clinical decision making.

PubMed

Woda, Aimee; Hansen, Jamie; Paquette, Mary; Topp, Robert

2017-09-01

An emerging nursing education trend is to utilize simulated learning experiences as a means to optimize competency and decision making skills. The purpose of this study was to examine differences in students' perception of clinical decision making and clinical decision making-related self-confidence and anxiety based on the sequence (order) in which they participated in a block of simulated versus hospital-based learning experiences. A quasi-experimental crossover design was used. Between and within group differences were found relative to self-confidence with the decision making process. When comparing groups, at baseline the simulation followed by hospital group had significantly higher self-confidence scores, however, at 14-weeks both groups were not significantly different. Significant within group differences were found in the simulation followed by hospital group only, demonstrating a significant decrease in clinical decision making related anxiety across the semester. Finally, there were no significant difference in; perceived clinical decision making within or between the groups at the two measurement points. Preliminary findings suggest that simulated learning experiences can be offered with alternating sequences without impacting the process, anxiety or confidence with clinical decision making. This study provides beginning evidence to guide curriculum development and allow flexibility based on student needs and available resources. Copyright © 2017. Published by Elsevier Ltd.

Day-Ahead Crude Oil Price Forecasting Using a Novel Morphological Component Analysis Based Model

PubMed Central

Zhu, Qing; Zou, Yingchao; Lai, Kin Keung

2014-01-01

As a typical nonlinear and dynamic system, the crude oil price movement is difficult to predict and its accurate forecasting remains the subject of intense research activity. Recent empirical evidence suggests that the multiscale data characteristics in the price movement are another important stylized fact. The incorporation of mixture of data characteristics in the time scale domain during the modelling process can lead to significant performance improvement. This paper proposes a novel morphological component analysis based hybrid methodology for modeling the multiscale heterogeneous characteristics of the price movement in the crude oil markets. Empirical studies in two representative benchmark crude oil markets reveal the existence of multiscale heterogeneous microdata structure. The significant performance improvement of the proposed algorithm incorporating the heterogeneous data characteristics, against benchmark random walk, ARMA, and SVR models, is also attributed to the innovative methodology proposed to incorporate this important stylized fact during the modelling process. Meanwhile, work in this paper offers additional insights into the heterogeneous market microstructure with economic viable interpretations. PMID:25061614

Self-Assembly of Organic Ferroelectrics by Evaporative Dewetting: A Case of β-Glycine.

PubMed

Seyedhosseini, Ensieh; Romanyuk, Konstantin; Vasileva, Daria; Vasilev, Semen; Nuraeva, Alla; Zelenovskiy, Pavel; Ivanov, Maxim; Morozovska, Anna N; Shur, Vladimir Ya; Lu, Haidong; Gruverman, Alexei; Kholkin, Andrei L

2017-06-14

Self-assembly of ferroelectric materials attracts significant interest because it offers a promising fabrication route to novel structures useful for microelectronic devices such as nonvolatile memories, integrated sensors/actuators, or energy harvesters. In this work, we demonstrate a novel approach for self-assembly of organic ferroelectrics (as exemplified by ferroelectric β-glycine) using evaporative dewetting, which allows forming quasi-regular arrays of nano- and microislands with preferred orientation of polarization axes. Surprisingly, self-assembled islands are crystallographically oriented in a radial direction from the center of organic "grains" formed during dewetting process. The kinetics of dewetting process follows the t -1/2 law, which is responsible for the observed polygon shape of the grain boundaries and island coverage as a function of radial position. The polarization in ferroelectric islands of β-glycine is parallel to the substrate and switchable under a relatively small dc voltage applied by the conducting tip of piezoresponse force microscope. Significant size effect on polarization is observed and explained within the Landau-Ginzburg-Devonshire phenomenological formalism.

Low hypoxia inducible factor-1α (HIF-1α) expression in testicular germ cell tumors - a major reason for enhanced chemosensitivity?

PubMed

Shenoy, Niraj; Dronca, Roxana; Quevedo, Fernando; Boorjian, Stephen A; Cheville, John; Costello, Brian; Kohli, Manish; Witzig, Thomas; Pagliaro, Lance

2017-08-01

The molecular basis for enhanced chemosensitivity of testicular germ cell tumors (GCT) has been an area of great interest, as it could potentially give us therapeutic leads in other resistant malignancies. Thus far, however, the increased sensitivity of GCT has been variously attributed to multiple factors - an inability to detoxify cisplatin, a lack of export pumps, an inability to repair the DNA damage, an intact apoptotic cascade and lack of p53 mutation; but a unifying underlying etiology leading to the aforementioned processes and having a translational implication has so far been elusive. Herein, we offer evidence to support a potential significant role for the previously demonstrated low hypoxia inducible factor-1α (HIF-1α) expression in mediating the general exquisite chemosensitivity of testicular GCT, through the aforementioned processes. This molecular mechanism based hypothesis could have a significant translational implication in platinum refractory GCT as well as other platinum resistant malignancies.

Day-ahead crude oil price forecasting using a novel morphological component analysis based model.

PubMed

Zhu, Qing; He, Kaijian; Zou, Yingchao; Lai, Kin Keung

2014-01-01

As a typical nonlinear and dynamic system, the crude oil price movement is difficult to predict and its accurate forecasting remains the subject of intense research activity. Recent empirical evidence suggests that the multiscale data characteristics in the price movement are another important stylized fact. The incorporation of mixture of data characteristics in the time scale domain during the modelling process can lead to significant performance improvement. This paper proposes a novel morphological component analysis based hybrid methodology for modeling the multiscale heterogeneous characteristics of the price movement in the crude oil markets. Empirical studies in two representative benchmark crude oil markets reveal the existence of multiscale heterogeneous microdata structure. The significant performance improvement of the proposed algorithm incorporating the heterogeneous data characteristics, against benchmark random walk, ARMA, and SVR models, is also attributed to the innovative methodology proposed to incorporate this important stylized fact during the modelling process. Meanwhile, work in this paper offers additional insights into the heterogeneous market microstructure with economic viable interpretations.

The Visualization Toolkit (VTK): Rewriting the rendering code for modern graphics cards

NASA Astrophysics Data System (ADS)

Hanwell, Marcus D.; Martin, Kenneth M.; Chaudhary, Aashish; Avila, Lisa S.

2015-09-01

The Visualization Toolkit (VTK) is an open source, permissively licensed, cross-platform toolkit for scientific data processing, visualization, and data analysis. It is over two decades old, originally developed for a very different graphics card architecture. Modern graphics cards feature fully programmable, highly parallelized architectures with large core counts. VTK's rendering code was rewritten to take advantage of modern graphics cards, maintaining most of the toolkit's programming interfaces. This offers the opportunity to compare the performance of old and new rendering code on the same systems/cards. Significant improvements in rendering speeds and memory footprints mean that scientific data can be visualized in greater detail than ever before. The widespread use of VTK means that these improvements will reap significant benefits.

Deconstructing Building Blocks: Preschoolers' Spatial Assembly Performance Relates to Early Mathematics Skills

PubMed Central

Verdine, Brian N.; Golinkoff, Roberta Michnick; Hirsh-Pasek, Kathryn; Newcombe, Nora S.; Filipowicz, Andrew T.; Chang, Alicia

2013-01-01

This study focuses on three main goals: First, 3-year-olds' spatial assembly skills are probed using interlocking block constructions (N = 102). A detailed scoring scheme provides insight into early spatial processing and offers information beyond a basic accuracy score. Second, the relation of spatial assembly to early mathematics skills was evaluated. Spatial skill independently predicted a significant amount of the variability in concurrent mathematics performance. Finally, the relationship between spatial assembly skill and socioeconomic status, gender, and parent-reported spatial language was examined. While children's performance did not differ by gender, lower-SES children were already lagging behind higher-SES children in block assembly. Furthermore, lower-SES parents reported using significantly fewer spatial words with their children. PMID:24112041

Power relations in qualitative research.

PubMed

Karnieli-Miller, Orit; Strier, Roni; Pessach, Liat

2009-02-01

This article focuses on the tensions between the commitment to power redistribution of the qualitative paradigm and the ethical and methodological complexity inherent in clinical research. Qualitative inquiry, in general, though there are significant variations between its different paradigms and traditions, proposes to reduce power differences and encourages disclosure and authenticity between researchers and participants. It clearly departs from the traditional conception of quantitative research, whereby the researcher is the ultimate source of authority and promotes the participants' equal participation in the research process. But it is precisely this admirable desire to democratize the research process, and the tendency to question traditional role boundaries, that raises multiple ethical dilemmas and serious methodological challenges. In this article, we offer a conceptual frame for addressing questions of power distribution in qualitative research through a developmental analysis of power relations across the different stages of the research process. We discuss ethical and methodological issues.

The UARS and open data concept and analysis study. [upper atmosphere

NASA Technical Reports Server (NTRS)

Mittal, M.; Nebb, J.; Woodward, H.

1983-01-01

Alternative concepts for a common design for the UARS and OPEN Central Data Handling Facility (CDHF) are offered. Costs for alternative implementations of the UARS designs are presented, showing that the system design does not restrict the implementation to a single manufacturer. Processing demands on the alternative UARS CDHF implementations are then discussed. With this information at hand together with estimates for OPEN processing demands, it is shown that any shortfall in system capability for OPEN support can be remedied by either component upgrades or array processing attachments rather than a system redesign. In addition to a common system design, it is shown that there is significant potential for common software design, especially in the areas of data management software and non-user-unique production software. Archiving the CDHF data are discussed. Following that, cost examples for several modes of communications between the CDHF and Remote User Facilities are presented. Technology application is discussed.

Master of Puppets: Cooperative Multitasking for In Situ Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morozov, Dmitriy; Lukic, Zarija

2016-01-01

Modern scientific and engineering simulations track the time evolution of billions of elements. For such large runs, storing most time steps for later analysis is not a viable strategy. It is far more efficient to analyze the simulation data while it is still in memory. Here, we present a novel design for running multiple codes in situ: using coroutines and position-independent executables we enable cooperative multitasking between simulation and analysis, allowing the same executables to post-process simulation output, as well as to process it on the fly, both in situ and in transit. We present Henson, an implementation of ourmore » design, and illustrate its versatility by tackling analysis tasks with different computational requirements. This design differs significantly from the existing frameworks and offers an efficient and robust approach to integrating multiple codes on modern supercomputers. The techniques we present can also be integrated into other in situ frameworks.« less

Computational Analysis and Simulation of Empathic Behaviors: A Survey of Empathy Modeling with Behavioral Signal Processing Framework

PubMed Central

Xiao, Bo; Imel, Zac E.; Georgiou, Panayiotis; Atkins, David C.; Narayanan, Shrikanth S.

2017-01-01

Empathy is an important psychological process that facilitates human communication and interaction. Enhancement of empathy has profound significance in a range of applications. In this paper, we review emerging directions of research on computational analysis of empathy expression and perception as well as empathic interactions, including their simulation. We summarize the work on empathic expression analysis by the targeted signal modalities (e.g., text, audio, facial expressions). We categorize empathy simulation studies into theory-based emotion space modeling or application-driven user and context modeling. We summarize challenges in computational study of empathy including conceptual framing and understanding of empathy, data availability, appropriate use and validation of machine learning techniques, and behavior signal processing. Finally, we propose a unified view of empathy computation, and offer a series of open problems for future research. PMID:27017830

Perceptual Learning: Use-Dependent Cortical Plasticity.

PubMed

Li, Wu

2016-10-14

Our perceptual abilities significantly improve with practice. This phenomenon, known as perceptual learning, offers an ideal window for understanding use-dependent changes in the adult brain. Different experimental approaches have revealed a diversity of behavioral and cortical changes associated with perceptual learning, and different interpretations have been given with respect to the cortical loci and neural processes responsible for the learning. Accumulated evidence has begun to put together a coherent picture of the neural substrates underlying perceptual learning. The emerging view is that perceptual learning results from a complex interplay between bottom-up and top-down processes, causing a global reorganization across cortical areas specialized for sensory processing, engaged in top-down attentional control, and involved in perceptual decision making. Future studies should focus on the interactions among cortical areas for a better understanding of the general rules and mechanisms underlying various forms of skill learning.

Physical Origins of Space Weather Impacts: Open Physics Questions

NASA Astrophysics Data System (ADS)

Lanzerotti, L. J.

2011-12-01

Beginning with the era of development of electrical telegraph systems in the early 19th century, physical processes in the space environment on the Sun, in the interplanetary medium, and around Earth have influenced the design and operations of ever-increasing and sophisticated technical systems, both in space and on the ground. Understanding of Earth's space environment has increased enormously in the last century and one-half. Nevertheless, many of the physical processes that produced effects on early cable and wireless technologies continue to plague modern-day systems. And as new technologies are developed for improved communications, surveillance, navigation, and conditions for human space flight, the solar-terrestrial environment often offers surprises to their safe, secure and uninterrupted operations. This talk will address some of the challenges that I see to the successful operations of some modern-day technical systems that are posed by significant deficiencies of understanding of physical processes operating from the Sun to the Earth.

Opportunities and challenges in biological lignin valorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckham, Gregg T.; Johnson, Christopher W.; Karp, Eric M.

Lignin is a primary component of lignocellulosic biomass that is an underutilized feedstock in the growing biofuels industry. Despite the fact that lignin depolymerization has long been studied, the intrinsic heterogeneity of lignin typically leads to heterogeneous streams of aromatic compounds, which in turn present significant technical challenges when attempting to produce lignin-derived chemicals where purity is often a concern. In Nature, microorganisms often encounter this same problem during biomass turnover wherein powerful oxidative enzymes produce heterogeneous slates of aromatics compounds. Some microbes have evolved metabolic pathways to convert these aromatic species via ‘upper pathways’ into central intermediates, which canmore » then be funneled through ‘lower pathways’ into central carbon metabolism in a process we dubbed ‘biological funneling’. This funneling approach offers a direct, biological solution to overcome heterogeneity problems in lignin valorization for the modern biorefinery. Coupled to targeted separations and downstream chemical catalysis, this concept offers the ability to produce a wide range of molecules from lignin. This perspective describes research opportunities and challenges ahead for this new field of research, which holds significant promise towards a biorefinery concept wherein polysaccharides and lignin are treated as equally valuable feedstocks. In particular, we discuss tailoring the lignin substrate for microbial utilization, host selection for biological funneling, ligninolytic enzyme–microbe synergy, metabolic engineering, expanding substrate specificity for biological funneling, and process integration, each of which presents key challenges. Ultimately, for biological solutions to lignin valorization to be viable, multiple questions in each of these areas will need to be addressed, making biological lignin valorization a multidisciplinary, co-design problem.« less

Developments in Earth observation for the assessment and monitoring of inland, transitional, coastal and shelf-sea waters.

PubMed

Tyler, Andrew N; Hunter, Peter D; Spyrakos, Evangelos; Groom, Steve; Constantinescu, Adriana Maria; Kitchen, Jonathan

2016-12-01

The Earth's surface waters are a fundamental resource and encompass a broad range of ecosystems that are core to global biogeochemical cycling and food and energy production. Despite this, the Earth's surface waters are impacted by multiple natural and anthropogenic pressures and drivers of environmental change. The complex interaction between physical, chemical and biological processes in surface waters poses significant challenges for in situ monitoring and assessment and often limits our ability to adequately capture the dynamics of aquatic systems and our understanding of their status, functioning and response to pressures. Here we explore the opportunities that Earth observation (EO) has to offer to basin-scale monitoring of water quality over the surface water continuum comprising inland, transition and coastal water bodies, with a particular focus on the Danube and Black Sea region. This review summarises the technological advances in EO and the opportunities that the next generation satellites offer for water quality monitoring. We provide an overview of algorithms for the retrieval of water quality parameters and demonstrate how such models have been used for the assessment and monitoring of inland, transitional, coastal and shelf-sea systems. Further, we argue that very few studies have investigated the connectivity between these systems especially in large river-sea systems such as the Danube-Black Sea. Subsequently, we describe current capability in operational processing of archive and near real-time satellite data. We conclude that while the operational use of satellites for the assessment and monitoring of surface waters is still developing for inland and coastal waters and more work is required on the development and validation of remote sensing algorithms for these optically complex waters, the potential that these data streams offer for developing an improved, potentially paradigm-shifting understanding of physical and biogeochemical processes across large scale river-sea systems including the Danube-Black Sea is considerable. Copyright © 2016. Published by Elsevier B.V.

Selection, Design and Applications of Solid Binding Peptides for Controlled Biomineralization

NASA Astrophysics Data System (ADS)

Gungormus, Mustafa

The regulated formation of inorganic minerals in living systems is called biomineralization. The mineralization processes of biogenic minerals are strictly regulated by a specific set of biomolecules, typically by proteins. Biologically formed calcium phosphates (hydroxyapatite (HA) in particular) are almost always nano-dimensional and nano-crystalline and are formed in vivo under mild conditions. The importance of understanding the molecular mechanisms underlying biological mineralization is underscored by the diseases associated with ectopic calcification or defects of skeletal mineralization. Proteins that mediate the mineralization process offer us a template for understanding how to potentially enhance the treatment of calcified tissue defects. However, the complexity and the number of proteins involved even in a rather simple biomineralization process can be daunting. The goal of this research was to identify short peptides through peptide-display libraries and demonstrate the utility of these peptides in better understanding the molecular mechanisms underlying biomineralization and as potential therapeutic agents in repairing calcified tissue defects. Using the phage-peptide display library, we have identified peptides that have affinity to HA and can regulate the formation of HA crystals. Utilizing the sequence knowledge obtained, we have identified putative functional domains within amelogenin; a naturally existing mineralization related protein, which, in turn, may provide a better understanding of the formation of dental enamel. These peptides also have the potential to be used to repair calcified tissue defects. To investigate this, we have developed and tested in vitro a hydrogel scaffold with pre-determined functionalities. We have also demonstrated the feasibility of obtaining significant re-mineralization of incipient dental root lesions ex vivo in a relatively short time using the mineralization-directing peptides. The approaches developed through this research may offer clinically acceptable novel procedures to treat calcified tissue defects because the developed peptide is safe to use and promotes the mineralization in a short period of time offered by none of the existing treatment options.

High Selectivity Gas Separation Membrane Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nachlas, Jesse; Corn, Isaac; Wegst, Ulrike

Global energy consumption is projected to be more than double of today’s levels by 2050. Economic and environmental pressures are putting significant limits on fossil fuel resources, and there is a significant push for improved efficiency in many industrial processes. Membranes for gas separation represent a significant opportunity for reduced energy consumption and improved efficiencies in a wide range of industrial applications by replacing typical high temperature processes or energy intensive processes with low temperature energy efficient processes. Carbon membranes represent an attractive class of membrane materials that offer the potential to improve the reliability, corrosion resistance and temperature capabilitymore » of polymeric membranes, which limit their adoption for many industrial applications. However, there are still a number of technical hurdles which must be overcome before carbon membranes can be made commercially ready including elimination of manufacturing defects, and improved performance (permeability and selectivity) relative to polymeric membranes. Examples of potential application of carbon membranes include production of oxygen enriched air (OEA) for combustion applications, separation of carbon dioxide (CO 2) from flue gas to improve the commercial feasibility of CO 2 sequestration, separation of hydrogen from CO/CO 2 during hydrogen manufacturing, and separation of H 2 from hydrocarbons during refinery operations to improve the kinetics of cracking reactions. As a result of these benefits there is a strong driving force to develop processing technologies capable of producing carbon membranes and possessing high reliability, for a wide range of applications. The DOE provides significant support for research and development is this area, as they have recognized the significant impact a low cost carbon membrane technology can have on energy consumption and polluting emissions across a broad range of industrial applications. In this SBIR Phase I project, we developed a novel polymer precursor composition, which led to highly reproducible crack-free porous carbon membranes that were capable of producing 30-50% oxygen for OEA from a pressurized air feed, thereby meeting the primary Phase I objective, and possessing a selectivity of ~20:1 for CO 2/N 2 separation. We also successfully developed a method for fabricating a ceramic support from low-cost fly ash. In general, the effectiveness of a carbon membrane at separating various gases is a function of the pore structure and size. The novel processing method utilized is capable of accurately controlling pore structure during the fabrication process opening the possibility to create a membrane technology platform that can operate across a broad range of gas compositions and applications. Nanoporous carbon membrane technology offers a very attractive option for important industrial gas separation processes that are typically energy intensive and expensive to install and operate. Highly efficient gas separation represents a key enabling technology for increasing efficiency and lowering cost in various applications involving advanced power generation systems, metallurgical operations and chemical processes. These benefits will be translated to the public through lower cost for goods and services in addition to lower cost for energy. Increased national security will come from decreased dependence on imported oil by making local resources, such as coal and natural gas, competitive in energy generation markets. Finally, making low cost oxygen available in these industries results in cleaner power production and reduced emissions of polluting gases.« less

7 CFR 52.4 - Where inspection service is offered.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 Regulations Governing Inspection and Certification Inspection Service § 52.4 Where...

Who gives to whom? Testing the support gap hypothesis with naturalistic observations of couple interactions.

PubMed

Wang, Shu-Wen; Repetti, Rena L

2016-06-01

We examined sex differences in explicitly supportive behavior exchanges between husbands and wives using naturalistic video-recordings of everyday couple interactions inside the home. Thirty dual-earner, middle class, heterosexual couples with school-age children were recorded in their homes over 4 days. Specific instances of face-to-face explicit couple support in the video-recordings were identified, and the support role assumed by each partner (recipient vs. provider), the method of support initiation (solicitations vs. offers), and the type of support (instrumental vs. emotional) in each interaction were coded. Paired samples t tests examined sex differences in husbands' and wives' supportive behavior, and bivariate correlations tested the associations among spouses' support initiation behaviors. Findings counter prior research that has largely found a "support gap" favoring husbands as support recipients. Instead, results indicate that wives received significantly more support of an instrumental nature from husbands (than husbands did from wives), a finding driven by wives' active support-soliciting behavior. Among husbands, a tendency to be the solicitor of support was positively correlated with a tendency to offer support. Within couples, rates of offers of support by 1 spouse were correlated with offers by the partner. Naturalistic observations highlight processes that may not be detected by self-reports or laboratory data, in an ecologically valid context in which social behavior reflects the natural rhythms and pulls of everyday life. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Zinc-oxide-silica-silver nanocomposite: Unique one-pot synthesis and enhanced catalytic and anti-bacterial performance.

PubMed

Kokate, Mangesh; Garadkar, Kalyanrao; Gole, Anand

2016-12-01

We describe herein a unique approach to synthesize zinc oxide-silica-silver (ZnO-SiO2-Ag) nanocomposite, in a simple, one-pot process. The typical process for ZnO synthesis by alkaline precipitation of zinc salts has been tweaked to replace alkali by alkaline sodium silicate. The free acid from zinc salts helps in the synthesis of silica nanoparticles, whereas the alkalinity of sodium silicate precipitates the zinc salts. Addition of silver ions into the reaction pot prior to addition of sodium silicate, and subsequent reduction by borohydride, gives additional functionality of metallic centres for catalytic applications. The synthesis strategy is based on our recent work typically involving acid-base type of cross-reactions and demonstrates a novel strategy to synthesize nanocomposites in a one-pot approach. Each component in the composite offers a unique feature. ZnO besides displaying mild catalytic and anti-bacterial behaviour is an excellent and a cheap 3-D support for heterogeneous catalysis. Silver nanoparticles enhance the catalytic & anti-bacterial properties of ZnO. Silica is an important part of the composite; which not only "glues" the two nanoparticles thereby stabilizing the nanocomposite, but also significantly enhances the surface area of the composite; which is an attractive feature of any catalyst composite. The nanocomposite is found to show excellent catalytic performance with very high turnover frequencies (TOFs) when studied for catalytic reduction of Rhodamine B (RhB) and 4-Nitrophenol (4-NP). Additionally, the composite has been tested for its anti-bacterial properties on three different bacterial strains i.e. E. coli, B. Cereus and Bacillus firmus. The mechanism for enhancement of catalytic performance has been probed by understanding the role of silica in offering accessibility to the catalyst via its porous high surface area network. The nanocomposite has been characterized by a host of different analytical techniques. The uniqueness of our product and process stems from the novel synthesis strategy, the choice and combination of the three moieties, increased surface area offered by silica, and cost effectiveness, thereby making our product and process commercially viable and sustainable for industrial applications. Copyright © 2016 Elsevier Inc. All rights reserved.

Perceptions and practices of U.S. dental schools regarding curriculum integrated format and traditional format licensure exams.

PubMed

Desai, Shamik; Allareddy, Veerasathpurush; Donoff, R Bruce; Howell, T Howard; Karimbux, Nadeem Y

2013-08-01

The dental licensure exam in the United States has evolved over the past ten years, and two formats-the traditional format and curriculum integrated format-are now available for students to satisfy licensure requirements. The objective of this study was to examine the differences and relative merits of the two formats. A twenty-five-question survey was distributed to the fifty-seven U.S. dental schools at the time. The survey included both quantitative and discrete variables and followed a strategic sequential order. The first set of questions sought to determine what type of board preparatory/mock exam each dental school offered, and the next set of questions asked which licensure exam each school formally offered. The final questions were qualitative in nature and aimed to determine the school representatives' opinions about the curriculum integrated format versus traditional format. Of the fifty-seven schools contacted, thirty-seven agreed to participate (response rate=64.9 percent). Fourteen schools reported that they administer the traditional format only and twelve administer the curriculum integrated format only, while eleven offer both. Thirty-two schools offered mock board exams to their graduating students, and twenty-four of those said their mock exams were identical in format to the actual qualifying clinical exams offered at their institution. The respondents reported no significant advantage to preparing for the curriculum integrated format examination as compared to the traditional format examination with regards to number of clock hours taken from regular curriculum time. In reporting on this study, this article provides an overview of the relative advantages and disadvantages of the two examination formats used for the dental licensure process in the United States.

The Gemini Recipe System: a dynamic workflow for automated data reduction

NASA Astrophysics Data System (ADS)

Labrie, Kathleen; Allen, Craig; Hirst, Paul; Holt, Jennifer; Allen, River; Dement, Kaniela

2010-07-01

Gemini's next generation data reduction software suite aims to offer greater automation of the data reduction process without compromising the flexibility required by science programs using advanced or unusual observing strategies. The Recipe System is central to our new data reduction software. Developed in Python, it facilitates near-real time processing for data quality assessment, and both on- and off-line science quality processing. The Recipe System can be run as a standalone application or as the data processing core of an automatic pipeline. The data reduction process is defined in a Recipe written in a science (as opposed to computer) oriented language, and consists of a sequence of data reduction steps, called Primitives, which are written in Python and can be launched from the PyRAF user interface by users wishing to use them interactively for more hands-on optimization of the data reduction process. The fact that the same processing Primitives can be run within both the pipeline context and interactively in a PyRAF session is an important strength of the Recipe System. The Recipe System offers dynamic flow control allowing for decisions regarding processing and calibration to be made automatically, based on the pixel and the metadata properties of the dataset at the stage in processing where the decision is being made, and the context in which the processing is being carried out. Processing history and provenance recording are provided by the AstroData middleware, which also offers header abstraction and data type recognition to facilitate the development of instrument-agnostic processing routines.

Do different fairness contexts and facial emotions motivate 'irrational' social decision-making in major depression? An exploratory patient study.

PubMed

Radke, Sina; Schäfer, Ina C; Müller, Bernhard W; de Bruijn, Ellen R A

2013-12-15

Although 'irrational' decision-making has been linked to depression, the contribution of biases in information processing to these findings remains unknown. To investigate the impact of cognitive biases and aberrant processing of facial emotions on social decision-making, we manipulated both context-related and emotion-related information in a modified Ultimatum Game. Unfair offers were (1) paired with different unselected alternatives, establishing the context in which an offer was made, and (2) accompanied by emotional facial expressions of proposers. Responder behavior was assessed in patients with major depressive disorder and healthy controls. In both groups alike, rejection rates were highest following unambiguous signals of unfairness, i.e. an angry proposer face or when an unfair distribution had deliberately been chosen over an equal split. However, depressed patients showed overall higher rejection rates than healthy volunteers, without exhibiting differential processing biases. This suggests that depressed patients were, as healthy individuals, basing their decisions on informative, salient features and differentiating between (i) fair and unfair offers, (ii) alternatives to unfair offers and (iii) proposers' facial emotions. Although more fundamental processes, e.g. reduced reward sensitivity, might underlie increased rejection in depression, the current study provides insight into mechanisms that shape fairness considerations in both depressed and healthy individuals. © 2013 Elsevier Ireland Ltd. All rights reserved.

Power to Punish Norm Violations Affects the Neural Processes of Fairness-Related Decision Making.

PubMed

Cheng, Xuemei; Zheng, Li; Li, Lin; Guo, Xiuyan; Wang, Qianfeng; Lord, Anton; Hu, Zengxi; Yang, Guang

2015-01-01

Punishing norm violations is considered an important motive during rejection of unfair offers in the ultimatum game (UG). The present study investigates the impact of the power to punish norm violations on people's responses to unfairness and associated neural correlates. In the UG condition participants had the power to punish norm violations, while an alternate condition, the impunity game (IG), was presented where participants had no power to punish norm violations since rejection only reduced the responder's income to zero. Results showed that unfair offers were rejected more often in UG compared to IG. At the neural level, anterior insula and dorsal anterior cingulate cortex were more active when participants received and rejected unfair offers in both UG and IG. Moreover, greater dorsolateral prefrontal cortex activity was observed when participants rejected than accepted unfair offers in UG but not in IG. Ventromedial prefrontal cortex activation was higher in UG than IG when unfair offers were accepted as well as when rejecting unfair offers in IG as opposed to UG. Taken together, our results demonstrate that the power to punish norm violations affects not only people's behavioral responses to unfairness but also the neural correlates of the fairness-related social decision-making process.

Cross-cultural re-entry for missionaries: a new application for the Dual Process Model.

PubMed

Selby, Susan; Clark, Sheila; Braunack-Mayer, Annette; Jones, Alison; Moulding, Nicole; Beilby, Justin

Nearly half a million foreign aid workers currently work worldwide, including over 140,000 missionaries. During re-entry these workers may experience significant psychological distress. This article positions previous research about psychological distress during re-entry, emphasizing loss and grief. At present there is no identifiable theoretical framework to provide a basis for assessment, management, and prevention of re-entry distress in the clinical setting. The development of theoretical concepts and frameworks surrounding loss and grief including the Dual Process Model (DPM) are discussed. All the parameters of the DPM have been shown to be appropriate for the proposed re-entry model, the Dual Process Model applied to Re-entry (DPMR). It is proposed that the DPMR is an appropriate framework to address the processes and strategies of managing re-entry loss and grief. Possible future clinical applications and limitations of the proposed model are discussed. The DPMR is offered for further validation and use in clinical practice.

Automatic hot wire GTA welding of pipe offers speed and increased deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sykes, I.; Digiacomo, J.

1995-07-01

Heavy-wall pipe welding for the power and petrochemical industry must meet code requirements. Contractors strive to meet these requirements in the most productive way possible. The challenge put to orbital welding equipment manufacturers is to produce pipe welding equipment that cost-effectively produces code-quality welds. Orbital welding equipment using the GTA process has long produced outstanding quality results but has lacked the deposition rate to compete cost effectively with other manual and semiautomatic processes such as SMAW, FCAW and GMAW. In recent years, significant progress has been made with the use of narrow-groove weld joint designs to reduce weld joint volumemore » and improve welding times. Astro Arc Polysoude, an orbital welding equipment manufacturer based in Sun Valley, Calif., and Nantes, France, has combined the hot wire GTAW process with orbital welding equipment using a narrow-groove weld joint design. Field test results show this process and procedure is a good alternative for many heavy-wall-pipe welding applications.« less

Hot-isostatically pressed wasteforms for Magnox sludge immobilisation

NASA Astrophysics Data System (ADS)

Heath, Paul G.; Stewart, Martin W. A.; Moricca, Sam; Hyatt, Neil C.

2018-02-01

Thermal treatment technologies offer many potential benefits for the treatment of radioactive wastes including the passivation of reactive species and significant waste volume reductions. This paper presents a study investigating the production of wasteforms using Hot-isostatic pressing technology for the immobilisation of Magnox sludges from the UK's Sellafield Site. Simulants considered physically representative of these sludges were used to determine possible processing parameters and to determine the phase assemblages and morphologies produced during processing. The study showed hot-isostatic pressing is capable of processing Magnox sludges at up to 60 wt% (oxide basis) into dense, mixed ceramic wasteforms. The wasteforms produced are a glass-bonded ceramic of mixed magnesium titanates, encapsulating localised grains of periclase. The ability to co-process Magnox sludges with SIXEP sand/clinoptilolite slurries has also been demonstrated. The importance of these results is presented through a comparison of volume reduction data, which shows HIPing may provide a 20-fold volume reduction over the current cementitious baseline and double the volume reduction attainable for vitrification technologies.

The value of remote sensing techniques in supporting effective extrapolation across multiple marine spatial scales.

PubMed

Strong, James Asa; Elliott, Michael

2017-03-15

The reporting of ecological phenomena and environmental status routinely required point observations, collected with traditional sampling approaches to be extrapolated to larger reporting scales. This process encompasses difficulties that can quickly entrain significant errors. Remote sensing techniques offer insights and exceptional spatial coverage for observing the marine environment. This review provides guidance on (i) the structures and discontinuities inherent within the extrapolative process, (ii) how to extrapolate effectively across multiple spatial scales, and (iii) remote sensing techniques and data sets that can facilitate this process. This evaluation illustrates that remote sensing techniques are a critical component in extrapolation and likely to underpin the production of high-quality assessments of ecological phenomena and the regional reporting of environmental status. Ultimately, is it hoped that this guidance will aid the production of robust and consistent extrapolations that also make full use of the techniques and data sets that expedite this process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Views of elementary school teachers towards students with cochlear implants inclusion in the process of education.

PubMed

Dulcić, Adinda; Bakota, Koraljka

2009-06-01

The paper reveals views of teachers in some regular elementary schools in the Republic of Croatia where students with cochlear implants, who are also rehabilitants of SUVAG Polyclinic, are educated. Survey aimed to research the views of teachers towards education. Survey included 98 teachers. Likert type scale was applied in order to identify the views of teachers towards students with hearing impairment. The survey was carried out in May 2007. Data were processed by SPSS for Windows program, version 13. Methods of descriptive statistics were applied to process frequencies of responds on variables for total sample and 3 statistically significant factors emerged by factor analysis. Results of this survey reveal that teachers have positive views towards inclusive education as a process which offers students with cochlear implants the possibility to socialize and achieve intellectual and emotional development. The survey suggests that the way of inclusion enforcement mostly satisfies the criteria specified for successful inclusion.

Reference Pricing Changes The 'Choice Architecture' Of Health Care For Consumers.

PubMed

Robinson, James C; Brown, Timothy T; Whaley, Christopher

2017-03-01

Reference pricing in health insurance creates incentives for patients to select for nonemergency services providers that charge relatively low prices and still offer high quality of care. It changes the "choice architecture" by offering standard coverage if the patient chooses cost-effective providers but requires considerable consumer cost sharing if more expensive alternatives are selected. The short-term impact of reference pricing has been to shift patient volumes from hospital-based to freestanding surgical, diagnostic, imaging, and laboratory facilities. This article summarizes reference pricing's impacts to date on patient choice, provider prices, surgical complications, and employer spending and estimates its potential impacts if expanded to more services and a broader population. Reference pricing induces consumers to select lower-price alternatives for all of the forms of care studied, leading to significant reductions in prices paid and spending incurred by insurers and employers. The impact on consumer cost sharing is mixed, with some studies finding higher copayments and some lower. We conclude with a discussion of the incentives created for providers to redesign their clinical processes and for efficient providers to expand into price-sensitive markets. Over time, reference pricing may increase pressures for price competition and lead to further cost-reducing innovations in health care products and processes. Project HOPE—The People-to-People Health Foundation, Inc.

Exposure assessment of carcass disposal options in the event of a notifiable exotic animal disease: application to avian influenza virus.

PubMed

Pollard, Simon J T; Hickman, Gordon A W; Irving, Phil; Hough, Rupert L; Gauntlett, Daniel M; Howson, Simon F; Hart, Alwyn; Gayford, Paul; Gent, Nick

2008-05-01

We present a generalized exposure assessment of 28 disposal options for poultry carcasses in the event of a highly pathogenic avian influenza (HPAI) outbreak. The analysis supports a hereto unverified disposal hierarchy for animal carcasses, placing waste processing (e.g., incineration and rendering) above controlled disposal (e.g., landfill), above uncontrolled disposal (e.g., burial on-farm). We illustrate that early stages of the disposal chain (on-farm) pose greater opportunities for exposure to hazardous agents than later stages, where agents are generally contained, wastes are treated, and residues are managed by regulated processes. In selecting carcass disposal options, practitioners are advised to consider the full range of hazards rather than focusing solely on the HPAI agent, and to give preference to technologies that (i) offer high destruction efficiencies for target pathogens; (ii) do not give rise to significant releases of other pathogenic organisms; and (iii) do not release unacceptable concentrations of toxic chemicals. The approach offers an exposure assessment perspective for carcass disposal, thus providing a risk-informed basis for contingency planning and operational intervention. The authors recognize that relevant legislation, public perception, available capacity, and cost also need to be considered when selecting disposal options in the event of HPAI.

SET: a pupil detection method using sinusoidal approximation

PubMed Central

Javadi, Amir-Homayoun; Hakimi, Zahra; Barati, Morteza; Walsh, Vincent; Tcheang, Lili

2015-01-01

Mobile eye-tracking in external environments remains challenging, despite recent advances in eye-tracking software and hardware engineering. Many current methods fail to deal with the vast range of outdoor lighting conditions and the speed at which these can change. This confines experiments to artificial environments where conditions must be tightly controlled. Additionally, the emergence of low-cost eye tracking devices calls for the development of analysis tools that enable non-technical researchers to process the output of their images. We have developed a fast and accurate method (known as “SET”) that is suitable even for natural environments with uncontrolled, dynamic and even extreme lighting conditions. We compared the performance of SET with that of two open-source alternatives by processing two collections of eye images: images of natural outdoor scenes with extreme lighting variations (“Natural”); and images of less challenging indoor scenes (“CASIA-Iris-Thousand”). We show that SET excelled in outdoor conditions and was faster, without significant loss of accuracy, indoors. SET offers a low cost eye-tracking solution, delivering high performance even in challenging outdoor environments. It is offered through an open-source MATLAB toolkit as well as a dynamic-link library (“DLL”), which can be imported into many programming languages including C# and Visual Basic in Windows OS (www.eyegoeyetracker.co.uk). PMID:25914641

Reconsolidation of memory: a decade of debate.

PubMed

Besnard, Antoine; Caboche, Jocelyne; Laroche, Serge

2012-10-01

Memory consolidation refers to a slow process that stabilises a memory trace after initial acquisition of novel events. The consolidation theory posits that once a memory is stored in the brain, it remains fixed for the lifetime of the memory. However, compelling evidence has suggested that upon recall, memories can re-enter a state of transient instability, requiring further stabilisation to be available once again for recall. Since its rehabilitation in the past ten years, this process of reconsolidation of memory after recall stimulated intense debates in the field of cognitive neuroscience. In this review we compile this plentiful literature with a particular emphasis on some of the key questions that have emerged from the reconsolidation theory. We focus on tracing the characterisation of the boundary conditions that constrain the occurrence of memory reconsolidation. We also discuss accumulating evidence supporting the idea that reconsolidation, as implied by its definition, is not a mere repetition of consolidation. We review seminal studies that uncovered specific mechanisms recruited during reconsolidation that are not always crucially involved in consolidation. We next address the physiological significance of reconsolidation since several lines of evidence support the idea that reconsolidation, as opposed to consolidation, may offer a unique opportunity to update memories. We finally discuss recent evidence for or against the potential that the process of memory reconsolidation offers for ongoing efforts to develop novel strategies to combat pathogenic memories. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of Data Processing Software for NBI Spectroscopic Analysis System

NASA Astrophysics Data System (ADS)

Zhang, Xiaodan; Hu, Chundong; Sheng, Peng; Zhao, Yuanzhe; Wu, Deyun; Cui, Qinglong

2015-04-01

A set of data processing software is presented in this paper for processing NBI spectroscopic data. For better and more scientific managment and querying these data, they are managed uniformly by the NBI data server. The data processing software offers the functions of uploading beam spectral original and analytic data to the data server manually and automatically, querying and downloading all the NBI data, as well as dealing with local LZO data. The set software is composed of a server program and a client program. The server software is programmed in C/C++ under a CentOS development environment. The client software is developed under a VC 6.0 platform, which offers convenient operational human interfaces. The network communications between the server and the client are based on TCP. With the help of this set software, the NBI spectroscopic analysis system realizes the unattended automatic operation, and the clear interface also makes it much more convenient to offer beam intensity distribution data and beam power data to operators for operation decision-making. supported by National Natural Science Foundation of China (No. 11075183), the Chinese Academy of Sciences Knowledge Innovation

Student self-assessment and its impact on learning - a pilot study.

PubMed

Dearnley, Christine A; Meddings, Fiona S

2007-05-01

Student self-assessment is widely reported to offer numerous advantages to the learner. It is a popular practice for empowering students and the advantages are claimed to incorporate increased dialogue between students and teachers and the development of skills that encompass critical awareness and reflectivity. It is, potentially, a process that may enable health care practitioners to be lifelong learners, equipped with the skills for autonomy in learning and professional practice. As such it might be viewed as an essential element of the curriculum. This paper reports on a study designed to evaluate the implementation of self-assessment among student health care practitioners. The pilot study examined the impact of self-assessment on learning and how the process was perceived by students and staff. Findings indicated that a varied approach had been taken to its implementation, which had significant repercussions in the way in which it was perceived by students. Similarly, there was a varied approach taken by students to the process of self-assessment and this had significant repercussions for its overall value as a learning tool. The outcomes of this study provide a sound rational for maintaining and expanding the practice of student self-assessment and important lessons for the process of doing so.

Are individuals with higher psychopathic traits better learners at lying? Behavioural and neural evidence.

PubMed

Shao, R; Lee, T M C

2017-07-25

High psychopathy is characterized by untruthfulness and manipulativeness. However, existing evidence on higher propensity or capacity to lie among non-incarcerated high-psychopathic individuals is equivocal. Of particular importance, no research has investigated whether greater psychopathic tendency is associated with better 'trainability' of lying. An understanding of whether the neurobehavioral processes of lying are modifiable through practice offers significant theoretical and practical implications. By employing a longitudinal design involving university students with varying degrees of psychopathic traits, we successfully demonstrate that the performance speed of lying about face familiarity significantly improved following two sessions of practice, which occurred only among those with higher, but not lower, levels of psychopathic traits. Furthermore, this behavioural improvement associated with higher psychopathic tendency was predicted by a reduction in lying-related neural signals and by functional connectivity changes in the frontoparietal and cerebellum networks. Our findings provide novel and pivotal evidence suggesting that psychopathic traits are the key modulating factors of the plasticity of both behavioural and neural processes underpinning lying. These findings broadly support conceptualization of high-functioning individuals with higher psychopathic traits as having preserved, or arguably superior, functioning in neural networks implicated in cognitive executive processing, but deficiencies in affective neural processes, from a neuroplasticity perspective.

Voluntary Professional Credentialing Programs. A Resource Handbook for Continuing Educators.

ERIC Educational Resources Information Center

Hanniford, Barbara, Ed.

This handbook describes 77 voluntary programs offering professional credentialing for people in a wide range of professional and occupational fields. Each description lists credentials, organization offering credentials, initial credentialing requirements, credential renewal requirements (if any), continuing education approval process, and other…

Green Processing Technologies for Improving Germinated Brown Rice Milk Beverages

USDA-ARS?s Scientific Manuscript database

Rice feeds approximately half the world’s population. Rice-derived beverages offer non-soy, lactose-free, hypoallergenic, cholesterol and gluten free value-added food sources. Rice milk beverages offer exceptional options for those with lactose intolerance, gluten sensitivities, obesity, heart dis...

AUDIOVISUAL HANDBOOK.

ERIC Educational Resources Information Center

JOHNSON, HARRY A.

UNDERGRADUATE AND GRADUATE ACADEMIC OFFERINGS IN THE DEPARTMENT OF AUDIOVISUAL EDUCATION ARE LISTED, AND THE INSERVICE FACULTY TRAINING PROGRAM AND THE EXTENSION AND CONSULTANT SERVICES ARE DESCRIBED. GENERAL SERVICES OFFERED BY THE CENTER ARE A COLLEGE FILM SHOWING SERVICE, A CHILDREN'S THEATRE, A PRODUCTION WORKSHOP, AN EMBOSOGRAF PROCESS,…

Teaching about Contracts.

ERIC Educational Resources Information Center

Froman, Michael; Kosnoff, Kathy

1978-01-01

Presents teaching strategies for introducing high school students to contract law. Offers as a case study a contract agreement between pro football players and team owners. Stresses basic elements of contracts (offer, acceptance, consideration, and understanding the bargaining process). Journal available from the American Bar Association, 1155…

International Spotlight: Israel

PubMed Central

Glicksman, Allen; Litwin, Howard

2011-01-01

The State of Israel provides significant opportunities to study social processes that can enhance our understanding of the aging experience. It has high life expectancy and rapid growth of its older population. With an older cohort that is composed largely of former immigrants and includes a minority Arab population, Israel provides much diversity for gerontological study. Among the unique issues facing older Israelis are the aging of Holocaust survivors, modernization in the Arab sector, and privatization in the kibbutzim. New legislation related to pensions and universal health care is expected to affect aging processes. The development of “supportive communities” offers a new service model. The article notes 2 longitudinal studies of importance—the Israeli component of the Survey of Health, Ageing, and Retirement in Europe and the Jerusalem Longitudinal Cohort Study. PMID:22038339

Role transition from caregiver to case manager--Part II.

PubMed

Schmitt, Nancy

2006-01-01

This two-part article explores the process of role transition as it pertains to nurses moving from roles of caregivers to roles of case managers. Part 1 of the article presented a theoretical model that demonstrated the interplay of significant factors in the process of role transition and discussed how this model could be used to examine nurses' experience of this transition. Part 2 presents findings from a qualitative study involving interview and focus group data contributed by nurses who have made the transition from caregiver to case manager. Data point to specific tensions experienced by these nurses, which are associated with time-task orientation, interactions and relationships, business culture and objectives, and self-image and professional identity. Recommendations for preparing and supporting nurses through this role are also offered.

An Algebra-Based Introductory Computational Neuroscience Course with Lab.

PubMed

Fink, Christian G

2017-01-01

A course in computational neuroscience has been developed at Ohio Wesleyan University which requires no previous experience with calculus or computer programming, and which exposes students to theoretical models of neural information processing and techniques for analyzing neural data. The exploration of theoretical models of neural processes is conducted in the classroom portion of the course, while data analysis techniques are covered in lab. Students learn to program in MATLAB and are offered the opportunity to conclude the course with a final project in which they explore a topic of their choice within computational neuroscience. Results from a questionnaire administered at the beginning and end of the course indicate significant gains in student facility with core concepts in computational neuroscience, as well as with analysis techniques applied to neural data.

Solar augmentation for process heat with central receiver technology

NASA Astrophysics Data System (ADS)

Kotzé, Johannes P.; du Toit, Philip; Bode, Sebastian J.; Larmuth, James N.; Landman, Willem A.; Gauché, Paul

2016-05-01

Coal fired boilers are currently one of the most widespread ways to deliver process heat to industry. John Thompson Boilers (JTB) offer industrial steam supply solutions for industry and utility scale applications in Southern Africa. Transport cost add significant cost to the coal price in locations far from the coal fields in Mpumalanga, Gauteng and Limpopo. The Helio100 project developed a low cost, self-learning, wireless heliostat technology that requires no ground preparation. This is attractive as an augmentation alternative, as it can easily be installed on any open land that a client may have available. This paper explores the techno economic feasibility of solar augmentation for JTB coal fired steam boilers by comparing the fuel savings of a generic 2MW heliostat field at various locations throughout South Africa.

Vacuum plasma coatings for turbine blades

NASA Technical Reports Server (NTRS)

Holmes, R. R.

1985-01-01

Turbine blades, vacuum plasma spray coated with NiCrAlY, CoCrAlY or NiCrAlY/Cr2O3, were evaluated and rated superior to standard space shuttle main engine (SSME) coated blades. Ratings were based primarily on 25 thermal cycles in the MSFC Burner Rig Tester, cycling between 1700 F (gaseous H2) and -423 F (liquid H2). These tests showed no spalling on blades with improved vacuum plasma coatings, while standard blades spalled. Thermal barrier coatings of ZrO2, while superior to standard coatings, lacked the overall performance desired. Fatigue and tensile specimens, machined from MAR-M-246(Hf) test bars identical to the blades were vacuum plasma spray coated, diffusion bond treated, and tested to qualify the vacuum plasma spray process for flight hardware testing and application. While NiCrAlY/Cr2O3 offers significant improvement over standard coatings in durability and thermal protection, studies continue with an objective to develop coatings offering even greater improvements.

Student outcomes of distance learning in nursing education: an integrative review.

PubMed

Patterson, Barbara J; Krouse, Anne M; Roy, Linda

2012-09-01

Distance learning offers a distinctive environment to educate nursing students. While there is a significant body of evidence in the literature related to course, program, and faculty outcomes of distance education, little attention has been given by researchers to evaluate student outcomes, with the exception of student satisfaction. There is a need to evaluate and translate findings related to student outcomes in distance learning into educational practice. Integrative reviews offer one strategy to contribute to evidence-based teaching practice initiatives. A search of available published qualitative and quantitative research on student outcomes of distance learning from 1999 to 2009 was conducted using a number of databases. Astin's Input-Environment-Output conceptual model provided a framework for this review. Thirty-three studies met the inclusion criteria. Bothcognitive and affective student outcomes emerged. The cognitive outcomes were student learning, learning process, and technology proficiency. Affective outcomes included personal and professional growth, satisfaction, and connectedness. Implications, recommendations, and future research are discussed.

Apparatus to collect, classify, concentrate, and characterize gas-borne particles

DOEpatents

Rader, Daniel J.; Torczynski, John R.; Wally, Karl; Brockmann, John E.

2002-01-01

An aerosol lab-on-a-chip (ALOC) integrates one or more of a variety of aerosol collection, classification, concentration (enrichment), and characterization processes onto a single substrate or layered stack of such substrates. By taking advantage of modern micro-machining capabilities, an entire suite of discrete laboratory aerosol handling and characterization techniques can be combined in a single portable device that can provide a wealth of data on the aerosol being sampled. The ALOC offers parallel characterization techniques and close proximity of the various characterization modules helps ensure that the same aerosol is available to all devices (dramatically reducing sampling and transport errors). Micro-machine fabrication of the ALOC significantly reduces unit costs relative to existing technology, and enables the fabrication of small, portable ALOC devices, as well as the potential for rugged design to allow operation in harsh environments. Miniaturization also offers the potential of working with smaller particle sizes and lower pressure drops (leading to reduction of power consumption).

Personal suffering and social criticism in T. S. Eliot's The Waste Land and A. Ginsberg's Howl: Implications for social psychiatry.

PubMed

Wigand, Moritz E; Wiegand, Hauke F; Rüsch, Nicolas; Becker, Thomas

2016-09-19

T. S. Eliot's The Waste Land and A. Ginsberg's Howl are two landmark poems of the 20th century which have a unique way of dealing with emotional suffering. (a) To explore the interplay between emotional suffering, conflicting relationships and societal perceptions; (b) to show the therapeutic effect of the writing process; (c) to analyse the portrayal of 'madness'; and (d) to discuss, in contemporary psychiatric terms, the 'solutions' offered by the poets. Qualitative research with a narrative, hermeneutic approach. Against the background of wartime/genocide and postwar disillusionment, close relationships are projected onto societal perceptions. Concepts of (self-)control, compassion, empowerment and self-efficacy are offered as solutions to overcome feelings of despair. In a time of perceived societal and environmental crises, both poems help us understand people's fears and how to counteract them. Besides biological approaches, the narrative approach to the suffering human being has not lost its significance. © The Author(s) 2016.

Neural responses to unfairness and fairness depend on self-contribution to the income

PubMed Central

Guo, Xiuyan; Zheng, Li; Cheng, Xuemei; Chen, Menghe; Li, Jianqi; Chen, Luguang; Yang, Zhiliang

2014-01-01

Self-contribution to the income (individual achievement) was an important factor which needs to be taken into individual’s fairness considerations. This study aimed at elucidating the modulation of self-contribution to the income, on recipient’s responses to unfairness in the Ultimatum Game. Eighteen participants were scanned while they were playing an adapted version of the Ultimatum Game as responders. Before splitting money, the proposer and the participant (responder) played the ball-guessing game. The responder’s contribution to the income was manipulated by both the participant’s and the proposer’s accuracy in the ball-guessing game. It turned out that the participants more often rejected unfair offers and gave lower fairness ratings when they played a more important part in the earnings. At the neural level, anterior insula, anterior cingulate cortex, dorsolateral prefrontal cortex and temporoparietal junction showed greater activities to unfairness when self-contribution increased, whereas ventral striatum and medial orbitofrontal gyrus showed higher activations to fair (vs unfair) offers in the other-contributed condition relative to the other two. Besides, the activations of right dorsolateral prefrontal cortex during unfair offers showed positive correlation with rejection rates in the self-contributed condition. These findings shed light on the significance of self-contribution in fairness-related social decision-making processes. PMID:23946001

On measuring community participation in research.

PubMed

Khodyakov, Dmitry; Stockdale, Susan; Jones, Andrea; Mango, Joseph; Jones, Felica; Lizaola, Elizabeth

2013-06-01

Active participation of community partners in research aspects of community-academic partnered projects is often assumed to have a positive impact on the outcomes of such projects. The value of community engagement in research, however, cannot be empirically determined without good measures of the level of community participation in research activities. Based on our recent evaluation of community-academic partnered projects centered around behavioral health issues, this article uses semistructured interview and survey data to outline two complementary approaches to measuring the level of community participation in research-a "three-model" approach that differentiates between the levels of community participation and a Community Engagement in Research Index (CERI) that offers a multidimensional view of community engagement in the research process. The primary goal of this article is to present and compare these approaches, discuss their strengths and limitations, summarize the lessons learned, and offer directions for future research. We find that whereas the three-model approach is a simple measure of the perception of community participation in research activities, CERI allows for a more nuanced understanding by capturing multiple aspects of such participation. Although additional research is needed to validate these measures, our study makes a significant contribution by illustrating the complexity of measuring community participation in research and the lack of reliability in simple scores offered by the three-model approach.

Religion's Effect on Mental Health in Schizophrenia: Examining the Roles of Meaning-Making and Seeking Social Support

PubMed Central

Tabak, Naomi T.; Weisman de Mamani, Amy

2015-01-01

While a growing body of research suggests that religion offers mental health benefits for individuals with schizophrenia, few studies have examined the mechanisms underlying this effect. The present study investigated two potential mediators (seeking social support and meaning-making coping) that may elucidate the nature of this relationship. The sample included 112 individuals with schizophrenia or schizoaffective disorder. Structural equation modeling was used to test whether religion was related to symptom severity and quality of life (QoL), and whether seeking social support and meaning-making coping mediated these effects. As expected, meaning-making coping significantly mediated the effect of intrinsic religion (use of religion as a framework to understand life) on QoL. While extrinsic religion (use of religion as a social convention) was associated with seeking social support, it did not relate to either outcome variable. Findings offer insight into the ways in which religion may improve the mental health of patients with schizophrenia. Results suggest that the adaptive elements of intrinsic religion seen in prior research may be explained by the meaning that religion offers. Clinical interventions that encourage patients to find meaning amidst adversity may improve QoL in this population. Future research would benefit from further investigation of the meaning-making process in individuals with schizophrenia. PMID:23428788

Nanofiber adsorbents for high productivity continuous downstream processing.

PubMed

Hardick, Oliver; Dods, Stewart; Stevens, Bob; Bracewell, Daniel G

2015-11-10

An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents opportunities for real-time process monitoring and automated control with potential benefits including predictable product specification, reduced labour costs, and integration with other continuous processes. Specifically to chromatographic operations continuous processing presents an opportunity to use expensive media more efficiently while reducing their size and therefore cost. Here for the first time we show how a new adsorbent material (cellulosic nanofibers) having advantageous convective mass transfer properties can be combined with a high frequency simulated moving bed (SMB) design to provide superior productivity in a simple bioseparation. Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non-woven fiber structure with diameters in the sub-micron range creates a remarkably high surface area material that allows for rapid convective flow operations. A proof of concept study demonstrated the performance of an anion exchange nanofiber adsorbent based on criteria including flow and mass transfer properties, binding capacity, reproducibility and life-cycle performance. Binding capacities of the DEAE adsorbents were demonstrated to be 10mg/mL, this is indeed only a fraction of what is achievable from porous bead resins but in combination with a very high flowrate, the productivity of the nanofiber system is shown to be significant. Suitable packing into a flow distribution device has allowed for reproducible bind-elute operations at flowrates of 2,400 cm/h, many times greater than those used in typical beaded systems. These characteristics make them ideal candidates for operation in continuous chromatography systems. A SMB system was developed and optimised to demonstrate the productivity of nanofiber adsorbents through rapid bind-elute cycle times of 7s which resulted in a 15-fold increase in productivity compared with packed bed resins. Reproducible performance of BSA purification was demonstrated using a 2-component protein solution of BSA and cytochrome c. The SMB system exploits the advantageous convective mass transfer properties of nanofiber adsorbents to provide productivities much greater than those achievable with conventional chromatography media. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

MATLAB-implemented estimation procedure for model-based assessment of hepatic insulin degradation from standard intravenous glucose tolerance test data.

PubMed

Di Nardo, Francesco; Mengoni, Michele; Morettini, Micaela

2013-05-01

Present study provides a novel MATLAB-based parameter estimation procedure for individual assessment of hepatic insulin degradation (HID) process from standard frequently-sampled intravenous glucose tolerance test (FSIGTT) data. Direct access to the source code, offered by MATLAB, enabled us to design an optimization procedure based on the alternating use of Gauss-Newton's and Levenberg-Marquardt's algorithms, which assures the full convergence of the process and the containment of computational time. Reliability was tested by direct comparison with the application, in eighteen non-diabetic subjects, of well-known kinetic analysis software package SAAM II, and by application on different data. Agreement between MATLAB and SAAM II was warranted by intraclass correlation coefficients ≥0.73; no significant differences between corresponding mean parameter estimates and prediction of HID rate; and consistent residual analysis. Moreover, MATLAB optimization procedure resulted in a significant 51% reduction of CV% for the worst-estimated parameter by SAAM II and in maintaining all model-parameter CV% <20%. In conclusion, our MATLAB-based procedure was suggested as a suitable tool for the individual assessment of HID process. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The Auditory Comprehension of Wh-Questions in Aphasia: Support for the Intervener Hypothesis.

PubMed

Sheppard, Shannon M; Walenski, Matthew; Love, Tracy; Shapiro, Lewis P

2015-06-01

This study examines 3 hypotheses about the processing of wh-questions in both neurologically healthy adults and adults with Broca's aphasia. We used an eye tracking while listening method with 32 unimpaired participants (Experiment 1) and 8 participants with Broca's aphasia (Experiment 2). Accuracy, response time, and online gaze data were collected. In Experiment 1, we established a baseline for how unimpaired processing and comprehension of 4 types of wh-question (subject- and object-extracted who- and which-questions) manifest. There was no unambiguous support found for any of the 3 hypotheses in Experiment 1. In Experiment 2 with the Broca's participants, however, we found significantly lower accuracy, slower response times, and increased interference in our gaze data in the object-extracted which-questions relative to the other conditions. Our results provide support for the intervener hypothesis, which states that sentence constructions that contain an intervener (a lexical noun phrase) between a displaced noun phrase and its gap site result in a significant processing disadvantage relative to other constructions. We argue that this hypothesis offers a compelling explanation for the comprehension deficits seen in some participants with Broca's aphasia.

Alternative Splicing in the Hippo Pathway—Implications for Disease and Potential Therapeutic Targets

PubMed Central

Porazinski, Sean; Ladomery, Michael

2018-01-01

Alternative splicing is a well-studied gene regulatory mechanism that produces biological diversity by allowing the production of multiple protein isoforms from a single gene. An involvement of alternative splicing in the key biological signalling Hippo pathway is emerging and offers new therapeutic avenues. This review discusses examples of alternative splicing in the Hippo pathway, how deregulation of these processes may contribute to disease and whether these processes offer new potential therapeutic targets. PMID:29534050

Image Processing

NASA Technical Reports Server (NTRS)

1987-01-01

A new spinoff product was derived from Geospectra Corporation's expertise in processing LANDSAT data in a software package. Called ATOM (for Automatic Topographic Mapping), it's capable of digitally extracting elevation information from stereo photos taken by spaceborne cameras. ATOM offers a new dimension of realism in applications involving terrain simulations, producing extremely precise maps of an area's elevations at a lower cost than traditional methods. ATOM has a number of applications involving defense training simulations and offers utility in architecture, urban planning, forestry, petroleum and mineral exploration.

Increasingly mobile: How new technologies can enhance qualitative research

PubMed Central

Moylan, Carrie Ann; Derr, Amelia Seraphia; Lindhorst, Taryn

2015-01-01

Advances in technology, such as the growth of smart phones, tablet computing, and improved access to the internet have resulted in many new tools and applications designed to increase efficiency and improve workflow. Some of these tools will assist scholars using qualitative methods with their research processes. We describe emerging technologies for use in data collection, analysis, and dissemination that each offer enhancements to existing research processes. Suggestions for keeping pace with the ever-evolving technological landscape are also offered. PMID:25798072

Reflection, A Meta-Model for Learning, and a Proposal To Improve the Quality of University Teaching = Reflexion, el meta-modelo del aprendizaje, y la propuesta del mejoramiento de la calidad de la docencia.

ERIC Educational Resources Information Center

Montgomery, Joel R.

This paper, in both English and Spanish, offers a meta-model of the learning process which focuses on the importance of the reflective learning process in enhancing the quality of learning in higher education. This form of innovative learning is offered as a means of helping learners to realize the relevance of what they are learning to their life…

Psychodrama groups for girls coping with trauma.

PubMed

Carbonell, D M; Parteleno-Barehmi, C

1999-07-01

This study evaluated the effectiveness of psychodrama groups with traumatized middle-school girls. Comparisons of treatment and control group members' pre- and postintervention adjustment revealed significant decreases in group participants' self-reported difficulties in withdrawn behavior and anxiety/depression. Interviews with the participants reinforced the value of psychodrama group participation in the resolution of trauma and in increasing a sense of competence and self-efficacy. A brief outline of the group structure and a description of the process offer examples that illustrate the practice methodology and provide guidance for conducting psychodrama groups with vulnerable populations. Concerns with safety and containment are addressed.

The Capgras delusion: a critique of its psychodynamic theories.

PubMed

Sinkman, A M

1983-07-01

The psychodynamic explanations for the Capgras delusion are reviewed. A critique is offered, showing how these theories fail to account for several important clinical phenomena found in patients with the Capgras delusion. A new psychodynamic theory is suggested that attempts to encompass all of the significant clinical phenomena. This hypothesis is based on findings in a series of fourteen schizophrenic patients with the typical delusion. The focus is on the patient's loss of a stable sense of identity. By the process of projection the patient ascribes his identity diffusion to those around him who are then seen as unreal impostors.

The anatomy of a shark attack: a case report and review of the literature.

PubMed

Caldicott, D G; Mahajani, R; Kuhn, M

2001-07-01

Shark attacks are rare but are associated with a high morbidity and significant mortality. We report the case of a patient's survival from a shark attack and their subsequent emergency medical and surgical management. Using data from the International Shark Attack File, we review the worldwide distribution and incidence of shark attack. A review of the world literature examines the features which make shark attacks unique pathological processes. We offer suggestions for strategies of management of shark attack, and techniques for avoiding adverse outcomes in human encounters with these endangered creatures.

Encapsulation of Active Compounds in Fruit and Vegetable Juice Processing: Current State and Perspectives.

PubMed

Speranza, Barbara; Petruzzi, Leonardo; Bevilacqua, Antonio; Gallo, Mariangela; Campaniello, Daniela; Sinigaglia, Milena; Corbo, Maria Rosaria

2017-06-01

The production of value-added and/or functional juices has increased significantly in recent years, following an increased consumer demand to promote health and/or prevent disease through diet and nutrition. Micro and nano-encapsulation are promising technologies to protect and deliver sensitive compounds, allowing a controlled release in the target sites. This paper offers an overview of current applications, limits and challenges of encapsulation technologies in the production of fruit and vegetable juices, with a particular emphasis on products derived from different botanical sources. © 2017 Institute of Food Technologists®.

Allosteric regulation of epigenetic modifying enzymes.

PubMed

Zucconi, Beth E; Cole, Philip A

2017-08-01

Epigenetic enzymes including histone modifying enzymes are key regulators of gene expression in normal and disease processes. Many drug development strategies to target histone modifying enzymes have focused on ligands that bind to enzyme active sites, but allosteric pockets offer potentially attractive opportunities for therapeutic development. Recent biochemical studies have revealed roles for small molecule and peptide ligands binding outside of the active sites in modulating the catalytic activities of histone modifying enzymes. Here we highlight several examples of allosteric regulation of epigenetic enzymes and discuss the biological significance of these findings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Green Propulsion Advancement and Infusion

NASA Technical Reports Server (NTRS)

Mulkey, Henry W.; Maynard, Andrew P.; Anflo, Kjell

2018-01-01

All space missions benefit from increased propulsion system performance allowing lower spacecraft launch mass, larger scientific payloads, or extended on-orbit lifetimes. Likewise, propellant candidates that offer significant reduction in personnel hazards and shorter payload processing present a more attractive propulsion subsystem solution. Aiming to reduce risk to potential infusion missions and fully comprehend the alternative propellant performance, the work presented herein represents many years of development and collaborative efforts to successfully align higher performance, low toxicity hydrazine alternatives into NASA Goddard Space Flight Center (GSFC) missions. The High Performance Green Propulsion (HPGP) technology is being considered for Science Mission Directorate (SMD) missions.

Technology transfer in New York City - The NASA/NYC Applications Project.

NASA Technical Reports Server (NTRS)

Karen, A.; Orrick, D.; Anuskiewicz, T.

1973-01-01

New York City faces many varied and complex problems ranging from truck hijacking to graffiti. In answer to a request from NYC officials NASA is sponsoring the efforts of a project aimed at applying aerospace-derived solutions to a series of city technical problems. An immediate result has been a pilot experiment to improve security in the City's schools. Other problem areas for NASA review have been selected from the Fire, Police and Air Resources Departments. The Project offers a significant example of a viable approach to the crucial process of bridging the communications gap between urban officials and technologists.

Implementing a research utilization plan for prevention of deep vein thrombosis.

PubMed

Van Wicklin, Sharon A; Ward, Karen S; Cantrell, Shirley W

2006-06-01

Ensuring use of best practices is crucially important in today's health care system. Nurses can identify research results that offer promising new treatment options for their patients and should have a plan for implementing research findings. The perioperative education coordinator at one facility identified the occurrence of deep vein thrombosis as a significant problem. She conducted a literature review, created an education program for nurses, and implemented an evidence-based practice change. This article describes the steps in this process. Now, patients at the facility consistently are assessed for deep vein thrombosis and receive appropriate preventive treatment.

A window on disease pathogenesis and potential therapeutic strategies: molecular imaging for arthritis

PubMed Central

2011-01-01

Novel molecular imaging techniques are at the forefront of both preclinical and clinical imaging strategies. They have significant potential to offer visualisation and quantification of molecular and cellular changes in health and disease. This will help to shed light on pathobiology and underlying disease processes and provide further information about the mechanisms of action of novel therapeutic strategies. This review explores currently available molecular imaging techniques that are available for preclinical studies with a focus on optical imaging techniques and discusses how current and future advances will enable translation into the clinic for patients with arthritis. PMID:21345267

Oral Biofluid Biomarker Research: Current Status and Emerging Frontiers

PubMed Central

Wang, Austin; Wang, Chris P.; Tu, Michael; Wong, David T.W.

2016-01-01

Salivary diagnostics is a rapidly advancing field that offers clinicians and patients the potential of rapid, noninvasive diagnostics with excellent accuracy. In order for the complete realization of the potential of saliva, however, extensive profiling of constituents must be conducted and diagnostic biomarkers must be thoroughly validated. This article briefly overviews the process of conducting a study of salivary biomarkers in a patient cohort and highlights the studies that have been conducted on different classes of molecules in the saliva. Emerging frontiers in salivary diagnostics research that may significantly advance the field will also be highlighted. PMID:27999326

Interoception drives increased rational decision-making in meditators playing the ultimatum game.

PubMed

Kirk, Ulrich; Downar, Jonathan; Montague, P Read

2011-01-01

Human decision-making is often conceptualized as a competition between cognitive and emotional processes in the brain. Deviations from rational processes are believed to derive from inclusion of emotional factors in decision-making. Here, we investigate whether experienced Buddhist meditators are better equipped to regulate emotional processes compared with controls during economic decision-making in the Ultimatum Game. We show that meditators accept unfair offers on more than half of the trials, whereas controls only accept unfair offers on one-quarter of the trials. By applying fMRI we show that controls recruit the anterior insula during unfair offers. Such responses are powerful predictors of rejecting offers in social interaction. By contrast, meditators display attenuated activity in high-level emotional representations of the anterior insula and increased activity in the low-level interoceptive representations of the posterior insula. In addition we show that a subset of control participants who play rationally (i.e., accepts >85% unfair offers) recruits the dorsolateral prefrontal cortex presumably reflecting increased cognitive demands, whereas rational meditators by contrast display elevated activity in the somatosensory cortex and posterior superior temporal cortex. In summary, when assessing unfairness in the Ultimatum Game, meditators activate a different network of brain areas compared with controls enabling them to uncouple negative emotional reactions from their behavior. These findings highlight the clinically and socially important possibility that sustained training in mindfulness meditation may impact distinct domains of human decision-making.

Integrated MEMS-based variable optical attenuator and 10Gb/s receiver

NASA Astrophysics Data System (ADS)

Aberson, James; Cusin, Pierre; Fettig, H.; Hickey, Ryan; Wylde, James

2005-03-01

MEMS devices can be successfully commercialized in favour of competing technologies only if they offer an advantage to the customer in terms of lower cost or increased functionality. There are limited markets where MEMS can be manufactured cheaper than similar technologies due to large volumes: automotive, printing technology, wireless communications, etc. However, success in the marketplace can also be realized by adding significant value to a system at minimal cost or leverging MEMS technology when other solutions simply will not work. This paper describes a thermally actuated, MEMS based, variable optical attenuator that is co-packaged with existing opto-electronic devices to develop an integrated 10Gb/s SONET/SDH receiver. The configuration of the receiver opto-electronics and relatively low voltage availability (12V max) in optical systems bar the use of LCD, EO, and electro-chromic style attenuators. The device was designed and fabricated using a silicon-on-insulator (SOI) starting material. The design and performance of the device (displacement, power consumption, reliability, physical geometry) was defined by the receiver parameters geometry. This paper will describe how these design parameters (hence final device geometry) were determined in light of both the MEMS device fabrication process and the receiver performance. Reference will be made to the design tools used and the design flow which was a joint effort between the MEMS vendor and the end customer. The SOI technology offered a robust, manufacturable solution that gave the required performance in a cost-effective process. However, the singulation of the devices required the development of a new singulation technique that allowed large volumes of silicon to be removed during fabrication yet still offer high singulation yields.

University Offer Rates for Candidates from Different Ethnic Categories

ERIC Educational Resources Information Center

Noden, Philip; Shiner, Michael; Modood, Tariq

2014-01-01

Previous research suggested that candidates from some black and minority ethnic groups were less likely to receive an offer of a place from an "old" university. These findings were disputed in a re-analysis carried out for HEFCE which found that only Pakistani candidates were significantly less likely to receive offers (from both…

Vocational Education Offerings in Rural High Schools. Issue Brief.

ERIC Educational Resources Information Center

Hudson, Lisa; Shafer, Linda

A study examined the types of vocational education programs offered in rural, suburban, and urban schools. Data from the 1999 Survey on Vocational Programs in Secondary Schools indicate no significant differences in the distribution of vocational education offerings in urban and suburban schools, so they were combined into a single category of…

Recommendations for Culturally Sensitive Research Methods

ERIC Educational Resources Information Center

Awad, Germine H.; Patall, Erika A.; Rackley, Kadie R.; Reilly, Erin D.

2016-01-01

As the US continues to diversify, methods for accurately assessing human behavior must evolve. This paper offers multicultural research considerations at several stages of the research process for psychological research and consultation. Implications regarding the comparative research framework are discussed and suggestions are offered on how to…

20 CFR 655.120 - Offered wage rate.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) Prefiling Procedures § 655.120 Offered wage rate. (a) To comply with...

Data Parallel Bin-Based Indexing for Answering Queries on Multi-Core Architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gosink, Luke; Wu, Kesheng; Bethel, E. Wes

2009-06-02

The multi-core trend in CPUs and general purpose graphics processing units (GPUs) offers new opportunities for the database community. The increase of cores at exponential rates is likely to affect virtually every server and client in the coming decade, and presents database management systems with a huge, compelling disruption that will radically change how processing is done. This paper presents a new parallel indexing data structure for answering queries that takes full advantage of the increasing thread-level parallelism emerging in multi-core architectures. In our approach, our Data Parallel Bin-based Index Strategy (DP-BIS) first bins the base data, and then partitionsmore » and stores the values in each bin as a separate, bin-based data cluster. In answering a query, the procedures for examining the bin numbers and the bin-based data clusters offer the maximum possible level of concurrency; each record is evaluated by a single thread and all threads are processed simultaneously in parallel. We implement and demonstrate the effectiveness of DP-BIS on two multi-core architectures: a multi-core CPU and a GPU. The concurrency afforded by DP-BIS allows us to fully utilize the thread-level parallelism provided by each architecture--for example, our GPU-based DP-BIS implementation simultaneously evaluates over 12,000 records with an equivalent number of concurrently executing threads. In comparing DP-BIS's performance across these architectures, we show that the GPU-based DP-BIS implementation requires significantly less computation time to answer a query than the CPU-based implementation. We also demonstrate in our analysis that DP-BIS provides better overall performance than the commonly utilized CPU and GPU-based projection index. Finally, due to data encoding, we show that DP-BIS accesses significantly smaller amounts of data than index strategies that operate solely on a column's base data; this smaller data footprint is critical for parallel processors that possess limited memory resources (e.g., GPUs).« less

Biotechnology/materials: The growing interface

NASA Astrophysics Data System (ADS)

Decker, Raymond F.

1986-01-01

The biotechnology/materials interaction dates back 3.5 billion years, yet today offers novel challenges for human creativity. The materials cycle practiced by microorganisms is compared to that recently practiced by humans. The processes of the biotechnology materials cycle are biogenesis, bioleaching, biofouling, biocorrosion, biodeterioration, and bioaccumulation. Each process is examined for mechanisms, scale of effect, and opportunity for creative human intervention or utilization. More than 50 of our metallic elements are bio-processed in nature. A like number of biogenic materials have been identified, with some at production rates of trillions of kg per annum (p.a.). Microorganisms can substitute for energy, capital, and labor. Over the eons, microorganisms have gained special attributes that now offer creative humans a new era of partnership in materials processing.

Printed Carbon Nanotube Electronics and Sensor Systems.

PubMed

Chen, Kevin; Gao, Wei; Emaminejad, Sam; Kiriya, Daisuke; Ota, Hiroki; Nyein, Hnin Yin Yin; Takei, Kuniharu; Javey, Ali

2016-06-01

Printing technologies offer large-area, high-throughput production capabilities for electronics and sensors on mechanically flexible substrates that can conformally cover different surfaces. These capabilities enable a wide range of new applications such as low-cost disposable electronics for health monitoring and wearables, extremely large format electronic displays, interactive wallpapers, and sensing arrays. Solution-processed carbon nanotubes have been shown to be a promising candidate for such printing processes, offering stable devices with high performance. Here, recent progress made in printed carbon nanotube electronics is discussed in terms of materials, processing, devices, and applications. Research challenges and opportunities moving forward from processing and system-level integration points of view are also discussed for enabling practical applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Conceptual design of an integrated hydrothermal liquefaction and biogas plant for sustainable bioenergy production.

PubMed

Hoffmann, Jessica; Rudra, Souman; Toor, Saqib S; Holm-Nielsen, Jens Bo; Rosendahl, Lasse A

2013-02-01

Initial process studies carried out in Aspen Plus on an integrated thermochemical conversion process are presented herein. In the simulations, a hydrothermal liquefaction (HTL) plant is combined with a biogas plant (BP), such that the digestate from the BP is converted to a biocrude in the HTL process. This biorefinery concept offers a sophisticated and sustainable way of converting organic residuals into a range of high-value biofuel streams in addition to combined heat and power (CHP) production. The primary goal of this study is to provide an initial estimate of the feasibility of such a process. By adding a diesel-quality-fuel output to the process, the product value is increased significantly compared to a conventional BP. An input of 1000 kg h(-1) manure delivers approximately 30-38 kg h(-1) fuel and 38-61 kg h(-1) biogas. The biogas can be used to upgrade the biocrude, to supply the gas grid or for CHP. An estimated 62-84% of the biomass energy can be recovered in the biofuels. Copyright © 2012 Elsevier Ltd. All rights reserved.

Coherent instability in wall-bounded turbulence

NASA Astrophysics Data System (ADS)

Hack, M. J. Philipp

2017-11-01

Hairpin vortices are commonly considered one of the major classes of coherent fluid motions in shear layers, even as their significance in the grand scheme of turbulence has remained an openly debated question. The statistical prevalence of the dynamic process that gives rise to the hairpins across different types of flows suggests an origin in a robust common mechanism triggered by conditions widespread in wall-bounded shear layers. This study seeks to shed light on the physical process which drives the generation of hairpin vortices. It is primarily facilitated through an algorithm based on concepts developed in the field of computer vision which allows the topological identification and analysis of coherent flow processes across multiple scales. Application to direct numerical simulations of boundary layers enables the time-resolved sampling and exploration of the hairpin process in natural flow. The analysis yields rich statistical results which lead to a refined characterization of the hairpin process. Linear stability theory offers further insight into the flow physics and especially into the connection between the hairpin and exponential amplification mechanisms. The results also provide a sharpened understanding of the underlying causality of events.

Is ‘informed consent’ an ‘understood consent’ in hematopoietic cell transplantation?

PubMed Central

D'Souza, A; Pasquini, M; Spellecy, R

2015-01-01

Hematopoietic cell transplantation (HCT) is a complex and highly specialized medical treatment that is associated with significant risks, including death. Furthermore, transplantation is offered to patients who often have no other curative treatment alternatives. The routine-consent process for HCT typically occurs before HCT and is influenced by many factors related to patients, physicians and the transplant per se. These factors can impede the consent process and subsequently result in a failure of proper engagement in and an understanding of the procedure with resultant adverse consequences influencing patients and even the patient–physician relationship. We contend that informed consent is a dynamic and ongoing process and that better patient education can assist in the decision making, fulfill the ethical principle of respect for autonomy and engage the patient to maximize compliance and adherence to therapy. This manuscript reviews the key literature pertaining to the decision-making and consent process in HCT and proposes guidelines for improving the consent process. Strategies for improving patient comprehension, engagement and enhancing consent forms are discussed. PMID:25243618

A Systematic Approach to Applying Lean Techniques to Optimize an Office Process at the Y-12 National Security Complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Credille, Jennifer; Owens, Elizabeth

This capstone offers the introduction of Lean concepts to an office activity to demonstrate the versatility of Lean. Traditionally Lean has been associated with process improvements as applied to an industrial atmosphere. However, this paper will demonstrate that implementing Lean concepts within an office activity can result in significant process improvements. Lean first emerged with the conception of the Toyota Production System. This innovative concept was designed to improve productivity in the automotive industry by eliminating waste and variation. Lean has also been applied to office environments, however the limited literature reveals most Lean techniques within an office are restrictedmore » to one or two techniques. Our capstone confronts these restrictions by introducing a systematic approach that utilizes multiple Lean concepts. The approach incorporates: system analysis, system reliability, system requirements, and system feasibility. The methodical Lean outline provides tools for a successful outcome, which ensures the process is thoroughly dissected and can be achieved for any process in any work environment.« less

Novel process chain for hot metal gas forming of ferritic stainless steel 1.4509

NASA Astrophysics Data System (ADS)

Mosel, André; Lambarri, Jon; Degenkolb, Lars; Reuther, Franz; Hinojo, José Luis; Rößiger, Jörg; Eurich, Egbert; Albert, André; Landgrebe, Dirk; Wenzel, Holger

2018-05-01

Exhaust gas components of automobiles are often produced in ferritic stainless steel 1.4509 due to the low thermal expansion coefficient and the low material price. Until now, components of the stainless steel with complex geometries have been produced in series by means of multi-stage hydroforming at room temperature with intermediate annealing operations. The application of a single-stage hot-forming process, also referred to as hot metal gas forming (HMGF), offers great potential to significantly reduce the production costs of such components. The article describes a novel process chain for the HMGF process. Therefore the tube is heated in two steps. After pre-heating of the semi-finished product outside the press, the tube is heated up to forming start temperature by means of a tool-integrated conductive heating before forming. For the tube of a demonstrator geometry, a simulation model for the conduction heating was set up. In addition to the tool development for this process, experimental results are also described for the production of the demonstrator geometry.

Mindfulness in Salah Prayer and its Association with Mental Health.

PubMed

Ijaz, Shahid; Khalily, Muhammad Tahir; Ahmad, Irshad

2017-12-01

Plethora of researches has been carried out for the last many decades and has identified relationship between mental health and religious convictions; in particular, range of religious practices has been found instrumental in the promotion of mental health. The aim of this paper is to find out association between mindfulness in Salah (prayer) and mental health of individuals who identify themselves with Islam and to examine the mental health of those Muslims who offer Salah prayer with mindfulness and those who offer without mindfulness. A total of 174 participants with mean age of 21.57 including 62% males and females 38% were selected through convenient sampling. RAND Mental Health Inventory was used to measure mental health and other three variables; three self-reported measures were constructed. They included Islamic religious education scale, Salah education scale and mindfulness in Salah scale. Psychometric properties for all scales were established. The findings indicated that mean on mindfulness and mental health was significantly higher for those who were offering Salah (prayer) regularly (p < 0.01) as compared with those who were not offering it regularly. Moreover, those who were offering Salah (prayer) with mindfulness had also significantly higher mean for mental health (p < 0.01) as compared with those who were offering it without mindfulness. Religious education, Salah education and mindfulness were able to account for 13% of the variance in mental health (p < 0.01). Of note two of the measures included Salah education and mindfulness made a significant contribution in the prediction of mental health (p < 0.01). The present study indicated that individuals who offer prayer regularly and with mindfulness have better mental health as compared with those who don't offer it regularly and with mindfulness. The findings of this study urge to spread awareness regarding offering prayer regularly with mindfulness for the better outcome of mental health in people.

From Discovery to Production: Biotechnology of Marine Fungi for the Production of New Antibiotics.

PubMed

Silber, Johanna; Kramer, Annemarie; Labes, Antje; Tasdemir, Deniz

2016-07-21

Filamentous fungi are well known for their capability of producing antibiotic natural products. Recent studies have demonstrated the potential of antimicrobials with vast chemodiversity from marine fungi. Development of such natural products into lead compounds requires sustainable supply. Marine biotechnology can significantly contribute to the production of new antibiotics at various levels of the process chain including discovery, production, downstream processing, and lead development. However, the number of biotechnological processes described for large-scale production from marine fungi is far from the sum of the newly-discovered natural antibiotics. Methods and technologies applied in marine fungal biotechnology largely derive from analogous terrestrial processes and rarely reflect the specific demands of the marine fungi. The current developments in metabolic engineering and marine microbiology are not yet transferred into processes, but offer numerous options for improvement of production processes and establishment of new process chains. This review summarises the current state in biotechnological production of marine fungal antibiotics and points out the enormous potential of biotechnology in all stages of the discovery-to-development pipeline. At the same time, the literature survey reveals that more biotechnology transfer and method developments are needed for a sustainable and innovative production of marine fungal antibiotics.

Continuous flow microfluidic separation and processing of rare cells and bioparticles found in blood - A review.

PubMed

Antfolk, Maria; Laurell, Thomas

2017-05-01

Rare cells in blood, such as circulating tumor cells or fetal cells in the maternal circulation, posses a great prognostic or diagnostic value, or for the development of personalized medicine, where the study of rare cells could provide information to more specifically targeted treatments. When conventional cell separation methods, such as flow cytometry or magnetic activated cell sorting, have fallen short other methods are desperately sought for. Microfluidics have been extensively used towards isolating and processing rare cells as it offers possibilities not present in the conventional systems. Furthermore, microfluidic methods offer new possibilities for cell separation as they often rely on non-traditional biomarkers and intrinsic cell properties. This offers the possibility to isolate cell populations that would otherwise not be targeted using conventional methods. Here, we provide an extensive review of the latest advances in continuous flow microfluidic rare cell separation and processing with each cell's specific characteristics and separation challenges as a point of view. Copyright © 2017 Elsevier B.V. All rights reserved.

The Gemini Recipe System: A Dynamic Workflow for Automated Data Reduction

NASA Astrophysics Data System (ADS)

Labrie, K.; Hirst, P.; Allen, C.

2011-07-01

Gemini's next generation data reduction software suite aims to offer greater automation of the data reduction process without compromising the flexibility required by science programs using advanced or unusual observing strategies. The Recipe System is central to our new data reduction software. Developed in Python, it facilitates near-real time processing for data quality assessment, and both on- and off-line science quality processing. The Recipe System can be run as a standalone application or as the data processing core of an automatic pipeline. Building on concepts that originated in ORAC-DR, a data reduction process is defined in a Recipe written in a science (as opposed to computer) oriented language, and consists of a sequence of data reduction steps called Primitives. The Primitives are written in Python and can be launched from the PyRAF user interface by users wishing for more hands-on optimization of the data reduction process. The fact that the same processing Primitives can be run within both the pipeline context and interactively in a PyRAF session is an important strength of the Recipe System. The Recipe System offers dynamic flow control allowing for decisions regarding processing and calibration to be made automatically, based on the pixel and the metadata properties of the dataset at the stage in processing where the decision is being made, and the context in which the processing is being carried out. Processing history and provenance recording are provided by the AstroData middleware, which also offers header abstraction and data type recognition to facilitate the development of instrument-agnostic processing routines. All observatory or instrument specific definitions are isolated from the core of the AstroData system and distributed in external configuration packages that define a lexicon including classifications, uniform metadata elements, and transformations.

Randomized Controlled Trial of the Combined Effects of Web and Quitline Interventions for Smokeless Tobacco Cessation

PubMed Central

Danaher, Brian G.; Severson, Herbert H.; Zhu, Shu-Hong; Andrews, Judy A.; Cummins, Sharon E.; Lichtenstein, Edward; Tedeschi, Gary J.; Hudkins, Coleen; Widdop, Chris; Crowley, Ryann; Seeley, John R.

2015-01-01

Background Use of smokeless tobacco (moist snuff and chewing tobacco) is a significant public health problem but smokeless tobacco users have few resources to help them quit. Web programs and telephone-based programs (Quitlines) have been shown to be effective for smoking cessation. We evaluate the effectiveness of a Web program, a Quitline, and the combination of the two for smokeless users recruited via the Web. Objectives To test whether offering both a Web and Quitline intervention for smokeless tobacco users results in significantly better long-term tobacco abstinence outcomes than offering either intervention alone; to test whether the offer of Web or Quitline results in better outcome than a self-help manual only Control condition; and to report the usage and satisfaction of the interventions when offered alone or combined. Methods Smokeless tobacco users (N= 1,683) wanting to quit were recruited online and randomly offered one of four treatment conditions in a 2×2 design: Web Only, Quitline Only, Web + Quitline, and Control (printed self-help guide). Point-prevalence all tobacco abstinence was assessed at 3- and 6-months post enrollment. Results 69% of participants completed both the 3- and 6-month assessments. There was no significant additive or synergistic effect of combining the two interventions for Complete Case or the more rigorous Intent To Treat (ITT) analyses. Significant simple effects were detected, individually the interventions were more efficacious than the control in achieving repeated 7-day point prevalence all tobacco abstinence: Web (ITT, OR = 1.41, 95% CI = 1.03, 1.94, p = .033) and Quitline (ITT: OR = 1.54, 95% CI = 1.13, 2.11, p = .007). Participants were more likely to complete a Quitline call when offered only the Quitline intervention (OR = 0.71, 95% CI = .054, .093, p = .013), the number of website visits and duration did not differ when offered alone or in combination with Quitline. Rates of program helpfulness (p <.05) and satisfaction (p <.05) were higher for those offered both interventions versus offered only quitline. Conclusion Combining Web and Quitline interventions did not result in additive or synergistic effects, as have been found for smoking. Both interventions were more effective than a self-help control condition in helping motivated smokeless tobacco users quit tobacco. Intervention usage and satisfaction were related to the amount intervention content offered. Usage of the Quitline intervention decreased when offered in combination, though rates of helpfulness and recommendations were higher when offered in combination. Trial Registration Clinicaltrials.gov NCT00820495; http://clinicaltrials.gov/ct2/show/NCT00820495 PMID:25914872

Health coaching in primary care: a feasibility model for diabetes care.

PubMed

Liddy, Clare; Johnston, Sharon; Nash, Kate; Ward, Natalie; Irving, Hannah

2014-04-03

Health coaching is a new intervention offering a one-on-one focused self-management support program. This study implemented a health coaching pilot in primary care clinics in Eastern Ontario, Canada to evaluate the feasibility and acceptability of integrating health coaching into primary care for patients who were either at risk for or diagnosed with diabetes. We implemented health coaching in three primary care practices. Patients with diabetes were offered six months of support from their health coach, including an initial face-to-face meeting and follow-up by email, telephone, or face-to-face according to patient preference. Feasibility was assessed through provider focus groups and qualitative data analysis methods. All three sites were able to implement the program. A number of themes emerged from the focus groups, including the importance of physician buy-in, wide variation in understanding and implementing of the health coach role, the significant impact of different systems of team communication, and the significant effect of organizational structure and patient readiness on Health coaches' capacity to perform their role. It is feasible to implement health coaching as an integrated program within small primary care clinics in Canada without adding additional resources into the daily practice. Practices should review their organizational and communication processes to ensure optimal support for health coaches if considering implementing this intervention.

Rethinking Process through Design

ERIC Educational Resources Information Center

Newcomb, Matthew; Leshowitz, Allison

2017-01-01

We take a look at work on writing processes by examining design processes. Design processes offer a greater emphasis on empathy with users, feedback and critique during idea generation, and varied uses of materials. After considering work already done on design and composition, we explore a variety of design processes and develop our own…

Processing and mechanical properties of metal-ceramic composites with controlled microstructure formed by reactive metal penetration

NASA Astrophysics Data System (ADS)

Ellerby, Donald Thomas

1999-12-01

Compared to monolithic ceramics, metal-reinforced ceramic composites offer the potential for improved toughness and reliability in ceramic materials. As such, there is significant scientific and commercial interest in the microstructure and properties of metal-ceramic composites. Considerable work has been conducted on modeling the toughening behavior of metal reinforcements in ceramics; however, there has been limited application and testing of these concepts on real systems. Composites formed by newly developed reactive processes now offer the flexibility to systematically control metal-ceramic composite microstructure, and to test some of the property models that have been proposed for these materials. In this work, the effects of metal-ceramic composite microstructure on resistance curve (R-curve) behavior, strength, and reliability were systematically investigated. Al/Al2O3 composites were formed by reactive metal penetration (RMP) of aluminum metal into aluminosilicate ceramic preforms. Processing techniques were developed to control the metal content, metal composition, and metal ligament size in the resultant composite microstructure. Quantitative stereology and microscopy were used to characterize the composite microstructures, and then the influence of microstructure on strength, toughness, R-curve behavior, and reliability, was investigated. To identify the strength limiting flaws in the composite microstructure, fractography was used to determine the failure origins. Additionally, the crack bridging tractions produced by the metal ligaments in metal-ceramic composites formed by the RMP process were modeled. Due to relatively large flaws and low bridging stresses in RMP composites, no dependence of reliability on R-curve behavior was observed. The inherent flaws formed during reactive processing appear to limit the strength and reliability of composites formed by the RMP process. This investigation has established a clear relationship between processing, microstructure, and properties in metal-ceramic composites formed by the RMP process. RMP composite properties are determined by the metal-ceramic composite microstructure (e.g., metal content and ligament size), which can be systematically varied by processing. Furthermore, relative to the ceramic preforms used to make the composites, metal-ceramic composites formed by RMP generally have improved properties and combinations of properties that make them more desirable for advanced engineering applications.

Suppliers solve processing problems

USDA-ARS?s Scientific Manuscript database

The year's IFT food expo showcased numerous companies and organizations offering solutions to food processing needs and challenges. From small-scale unit operations to commercial-scale equipment lines, exhibitors highlighted both traditional and novel food processing operations fro food product dev...

When a Baby Dies.

ERIC Educational Resources Information Center

Church, Martha Jo; And Others

Written especially for grieving mothers whose babies have died, this booklet offers an overview of stages and experiences through which bereaved parents commonly pass. Specifically, the text is intended to give comfort to bereaved parents, offer insight into the grieving process, and provide thoughts on leave-taking ceremonies. The first section…

Vision Sensors and Cameras

NASA Astrophysics Data System (ADS)

Hoefflinger, Bernd

Silicon charge-coupled-device (CCD) imagers have been and are a specialty market ruled by a few companies for decades. Based on CMOS technologies, active-pixel sensors (APS) began to appear in 1990 at the 1 μm technology node. These pixels allow random access, global shutters, and they are compatible with focal-plane imaging systems combining sensing and first-level image processing. The progress towards smaller features and towards ultra-low leakage currents has provided reduced dark currents and μm-size pixels. All chips offer Mega-pixel resolution, and many have very high sensitivities equivalent to ASA 12.800. As a result, HDTV video cameras will become a commodity. Because charge-integration sensors suffer from a limited dynamic range, significant processing effort is spent on multiple exposure and piece-wise analog-digital conversion to reach ranges >10,000:1. The fundamental alternative is log-converting pixels with an eye-like response. This offers a range of almost a million to 1, constant contrast sensitivity and constant colors, important features in professional, technical and medical applications. 3D retino-morphic stacking of sensing and processing on top of each other is being revisited with sub-100 nm CMOS circuits and with TSV technology. With sensor outputs directly on top of neurons, neural focal-plane processing will regain momentum, and new levels of intelligent vision will be achieved. The industry push towards thinned wafers and TSV enables backside-illuminated and other pixels with a 100% fill-factor. 3D vision, which relies on stereo or on time-of-flight, high-speed circuitry, will also benefit from scaled-down CMOS technologies both because of their size as well as their higher speed.

The advent of canine performance science: offering a sustainable future for working dogs.

PubMed

Cobb, Mia; Branson, Nick; McGreevy, Paul; Lill, Alan; Bennett, Pauleen

2015-01-01

Working and sporting dogs provide an essential contribution to many industries worldwide. The common development, maintenance and disposal of working and sporting dogs can be considered in the same way as other animal production systems. The process of 'production' involves genetic selection, puppy rearing, recruitment and assessment, training, housing and handling, handler education, health and working life end-point management. At present, inefficiencies throughout the production process result in a high failure rate of dogs attaining operational status. This level of wastage would be condemned in other animal production industries for economic reasons and has significant implications for dog welfare, as well as public perceptions of dog-based industries. Standards of acceptable animal use are changing and some historically common uses of animals are no longer publicly acceptable, especially where harm is caused for purposes deemed trivial, or where alternatives exist. Public scrutiny of animal use appears likely to increase and extend to all roles of animals, including working and sporting dogs. Production system processes therefore need to be transparent, traceable and ethically acceptable for animal use to be sustainable into the future. Evidence-based approaches already inform best practice in fields as diverse as agriculture and human athletic performance. This article introduces the nascent discipline of canine performance science, which aims to facilitate optimal product quality and production efficiency, while also assuring evidence-based increments in dog welfare through a process of research and development. Our thesis is that the model of canine performance science offers an objective, transparent and traceable opportunity for industry development in line with community expectations and underpins a sustainable future for working dogs. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

Regenerative endodontics.

PubMed

Simon, S; Smith, A J

2014-03-01

Significant advances in our understanding of the biological processes involved in tooth development and repair at the cellular and molecular levels have underpinned the newly emerging area of regenerative endodontics. Development of treatment protocols based on exploiting the natural wound healing properties of the dental pulp and applying tissue engineering principles has allowed reporting of case series showing preservation of tissue vitality and apexogenesis. To review current case series reporting regenerative endodontics. Current treatment approaches tend to stimulate more reparative than regenerative responses in respect of the new tissue generated, which often does not closely resemble the physiological structure of dentine-pulp. However, despite these biological limitations, such techniques appear to offer significant promise for improved treatment outcomes. Improved biological outcomes will likely emerge from the many experimental studies being reported and will further contribute to improvements in clinical treatment protocols.

Molecular dynamics-driven drug discovery: leaping forward with confidence.

PubMed

Ganesan, Aravindhan; Coote, Michelle L; Barakat, Khaled

2017-02-01

Given the significant time and financial costs of developing a commercial drug, it remains important to constantly reform the drug discovery pipeline with novel technologies that can narrow the candidates down to the most promising lead compounds for clinical testing. The past decade has witnessed tremendous growth in computational capabilities that enable in silico approaches to expedite drug discovery processes. Molecular dynamics (MD) has become a particularly important tool in drug design and discovery. From classical MD methods to more sophisticated hybrid classical/quantum mechanical (QM) approaches, MD simulations are now able to offer extraordinary insights into ligand-receptor interactions. In this review, we discuss how the applications of MD approaches are significantly transforming current drug discovery and development efforts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Who cares? Offering emotion work as a 'gift' in the nursing labour process.

PubMed

Bolton, S C

2000-09-01

Who cares? Offering emotion work as a 'gift' in the nursing labour process The emotional elements of the nursing labour process are being recognized increasingly. Many commentators stress that nurses' 'emotional labour' is hard and productive work and should be valued in the same way as physical or technical labour. However, the term 'emotional labour' fails to conceptualize the many occasions when nurses not only work hard on their emotions in order to present the detached face of a professional carer, but also to offer authentic caring behaviour to patients in their care. Using qualitative data collected from a group of gynaecology nurses in an English National Health Service (NHS) Trust hospital, this paper argues that nursing work is emotionally complex and may be better understood by utilizing a combination of Hochschild's concepts: emotion work as a 'gift' in addition to 'emotional labour'. The gynaecology nurses in this study describe their work as 'emotionful' and therefore it could be said that this particular group of nurses represent a distinct example. Nevertheless, though it is impossible to generalize from limited data, the research presented in this paper does highlight the emotional complexity of the nursing labour process, expands the current conceptual analysis, and offers a path for future research. The examination further emphasizes the need to understand and value the motivations behind nurses' emotion work and their wish to maintain caring as a central value in professional nursing.

Combinatorial Production and Processing of Oxide Nanopowders for Transparent, Ceramic Lasers

DTIC Science & Technology

2007-06-01

lasers have only recently been 10-16shown to offer power outputs superior to single crystal lasers. 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17...7 Although known for 30 years, 8 9 transparent ceramic lasers have only recently been shown to offer power outputs superior to single crystal lasers...offer: (1) higher energy production than single crystal lasers; (2) access to very large sizes and arbitrarily shaped gain media; (3) access to new

Effects of modified atmosphere packing and honey dip treatments on quality maintenance of minimally processed grape cv. Razaki (V. vinifera L.) during cold storage.

PubMed

Sabır, Ali; Sabır, Ferhan K; Kara, Zeki

2011-06-01

Increasing pressure in food conservation sector to replace chemical applications has urged researchers to focus on studying new strategies of extending the postharvest life of produces. In such efforts, numerous materials have been tested for their effectiveness as well as suitability in organic consumption. In this study, effects of modified atmosphere packing (MAP) and honey solution dip on maintenance of quality of minimally processed table grape cv. Razaki were investigated. During the storage at 0 °C with relative humidity of 90%, MAP, honey dip, and their combined applications significantly retarded the weight loss of berries that retained about 2 mm of cap stem. Soluble solid contents of all berries slightly increased, while their acid amounts decreased, resulting in consecutive rises of maturity index. With respect to the sensory score, calculated as mean of ten panelists, honey treatment alone was ranked the highest while control berries had significantly lower value. Overall, MAP, honey solution dip or their combination significantly maintained the general quality of minimally processed grape by delaying quality loss and berry decay. Therefore, honey solution dip yielded promising results to use as an edible organic coating barrier to moisture and resist to water vapor diffusion during the cold storage, offering a good adherence to berry surface.

The use of marine cloud water samples as a diagnostic tool for aqueous chemistry, cloud microphysical processes and dynamics

NASA Astrophysics Data System (ADS)

Crosbie, E.; Ziemba, L. D.; Moore, R.; Shook, M.; Jordan, C.; Thornhill, K. L., II; Winstead, E.; Shingler, T.; Brown, M.; MacDonald, A. B.; Dadashazar, H.; Sorooshian, A.; Weiss-Penzias, P. S.; Anderson, B.

2017-12-01

Clouds play several roles in the Earth's climate system. In addition to their clear significance to the hydrological cycle, they strongly modulate the shortwave and longwave radiative balance of the atmosphere, with subsequent feedback on the atmospheric circulation. Furthermore, clouds act as a conduit for the fate and emergence of important trace chemical species and are the predominant removal mechanism for atmospheric aerosols. Marine boundary layer clouds cover large swaths of the global oceans. Because of their global significance, they have attracted significant attention into understanding how changes in aerosols are translated into changes in cloud macro- and microphysical properties. The circular nature of the influence of clouds-on-aerosols and aerosols-on-clouds has been used to explain the chaotic patterns often seen in marine clouds, however, this feedback also presents a substantial hurdle in resolving the uncertain role of anthropogenic aerosols on climate. Here we discuss ways in which the chemical constituents found in cloud water can offer insight into the physical and chemical processes inherent in marine clouds, through the use of aircraft measurements. We focus on observational data from cloud water samples collected during flights conducted over the remote North Atlantic and along coastal California across multiple campaigns. We explore topics related to aqueous processing, wet scavenging and source apportionment.

Does incentivising pill-taking 'crowd out' risk-information processing? Evidence from a web-based experiment.

PubMed

Mantzari, Eleni; Vogt, Florian; Marteau, Theresa M

2014-04-01

The use of financial incentives for changing health-related behaviours raises concerns regarding their potential to undermine the processing of risks associated with incentivised behaviours. Uncertainty remains about the validity of such concerns. This web-based experiment assessed the impact of financial incentives on i) willingness to take a pill with side-effects; ii) the time spent viewing risk-information and iii) risk-information processing, assessed by perceived-risk of taking the pill and knowledge of its side-effects. It further assesses whether effects are moderated by limiting cognitive capacity. Two-hundred and seventy-five UK-based university staff and students were recruited online under the pretext of being screened for a fictitious drug-trial. Participants were randomised to the offer of different compensation levels for taking a fictitious pill (£0; £25; £1000) and the presence or absence of a cognitive load task (presentation of five digits for later recall). Willingness to take the pill increased with the offer of £1000 (84% vs. 67%; OR 3.66, CI 95% 1.27-10.6), but not with the offer of £25 (79% vs. 67%; OR 1.68, CI 95% 0.71-4.01). Risk-information processing was unaffected by the offer of incentives. The time spent viewing the risk-information was affected by the offer of incentives, an effect moderated by cognitive load: Without load, time increased with the value of incentives (£1000: M = 304.4sec vs. £0: M = 37.8sec, p < 0.001; £25: M = 66.6sec vs. £0: M = 37.8sec, p < 0.001). Under load, time decreased with the offer of incentives (£1000: M = 48.9sec vs. £0: M = 132.7sec, p < 0.001; £25: M = 60.9sec vs. £0: M = 132.7sec, p < 0.001), but did not differ between the two incentivised groups (p = 1.00). This study finds no evidence to suggest incentives "crowd out" risk-information processing. On the contrary, incentives appear to signal risk, an effect, however, which disappears under cognitive load. Although these findings require replication, they highlight the need to maximise cognitive capacity when presenting information about incentivised health-related behaviours. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Changing the way employee benefit communications are produced: outsourcing, a more efficient, less costly process.

PubMed

Herren, K

1995-12-01

Outsourcing may offer employers an efficient, cost-effective way to produce employee benefit communications. It offers a way to utilize the latest technology to produce personalized benefit statements or to target an announcement of benefit changes to a specific group of employees.

Spanish Renditions of Well-Known Stories and Novels.

ERIC Educational Resources Information Center

Schon, Isabel

2000-01-01

Argues that recent translations of works into Spanish are a great way to engage Spanish-speaking adolescents in the reading process. Offers brief descriptions of 16 such books that offer appeal for reluctant readers, accessible adventures, books about trendy subjects of interest to adolescents, and engrossing renditions of classics by world…

Performance Scripts Creation: Processes and Applications

ERIC Educational Resources Information Center

Lyons, Paul

2006-01-01

Purpose: Seeks to explain some of the dynamics of scripts creation as used in training, to offer some theoretical underpinning regarding the influence of script creation on behavior and performance, and to offer some examples of how script creation is applied in training activities. Design/methodology/approach: The paper explains in detail and…

Modeling Academic Education Processes by Dynamic Storyboarding

ERIC Educational Resources Information Center

Sakurai, Yoshitaka; Dohi, Shinichi; Tsuruta, Setsuo; Knauf, Rainer

2009-01-01

In high-level education such as university studies, there is a flexible but complicated system of subject offerings and registration rules such as prerequisite subjects. Those offerings, connected with registration rules, should be matched to the students' learning needs and desires, which change dynamically. Students need assistance in such a…

Afterword: Considerations for Future Practice of Assessment and Accountability

ERIC Educational Resources Information Center

Bresciani, Marilee J.

2013-01-01

This afterword offers challenges and considerations as the assessment movement continues to develop. The author offers some simple considerations for readers to ponder as they advance their evidence-based decision making processes, and encourages others to use these methods within the context of recent neuroscientific evidence that learning and…

Business Models for Training and Performance Improvement Departments

ERIC Educational Resources Information Center

Carliner, Saul

2004-01-01

Although typically applied to entire enterprises, the concept of business models applies to training and performance improvement groups. Business models are "the method by which firm[s] build and use [their] resources to offer.. value." Business models affect the types of projects, services offered, skills required, business processes, and type of…

Computing in the Clouds

ERIC Educational Resources Information Center

Johnson, Doug

2010-01-01

Web-based applications offer teachers, students, and school districts a convenient way to accomplish a wide range of tasks, from accounting to word processing, for free. Cloud computing has the potential to offer staff and students better services at a lower cost than the technology deployment models they're using now. Saving money and improving…

Survey of Existing Indian Parenting Programs.

ERIC Educational Resources Information Center

Kellogg, Jeff B., Comp.

This survey of existing American Indian parenting programs is part of a National American Indian Court Judges Association project to design a model process by which social service providers can offer effective parent education programs that are culturally relevant to American Indians. The report also offers profiles, including addresses and names…

How Learning Mathematics Can Be Made More Enjoyable

ERIC Educational Resources Information Center

D'Apice, Ciro; Manzo, Rosanna

2004-01-01

New information technologies can act as a Trojan horse offering activities that will require major changes in the teaching-learning process. Computer aided learning applications are able to offer advanced students the opportunity to improve their skills and to maintain their motivation. In the spirit of "learning by doing", they are…

Talking to the Enemy: Track Two Diplomacy in the Middle East and South Asia

DTIC Science & Technology

2007-01-01

graph considers the roles as well as the limits of such processes and offers ways in which project organizers and funders might assess vari- ous...Dialogues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Neemrana Process ...82 Shanghai Process

Real World of Industrial Chemistry: The SHOP Process: An Example of Industrial Creativity.

ERIC Educational Resources Information Center

Reuben, Bryan; Wittcoff, Harold

1988-01-01

Discusses the Shell Higher Olefins Process (SHOP) in the manufacture of primary C11-C15 fatty alcohols. Offers examples and explanations of the four-step process. Gives uses for reaction products. (ML)

Progression to surgery: online versus live seminar.

PubMed

Miletics, Maureen; Claros, Leonardo; Stoltzfus, Jill; Davis, Terri; Chaar, Maher El

2018-03-01

The objective of this study was to evaluate progression to surgery rates for live and online seminar and assess weight loss outcome comparisons at 1-year postoperation. University Hospital Network, Allentown, PA, USA. The entry point into our program was an information seminar where prospective patients are educated about obesity, bariatric surgery, indications and contraindications, risks and benefits, and our center's process. Between January of 2009 and November of 2011, only live information seminars were offered. In November of 2011, we started offering an online information seminar to reach those who are unable to attend a live seminar. Tracking of live versus online seminar attendance was documented in our database. Between November 1, 2011 and September 30, 2015, 3484 people completed an information seminar. Of those, 2744 attendees came to a live seminar while 740 completed the online seminar. A significantly higher number of live seminar attendees, 78.1% (2144/2744) progressed to an office visit compared with online seminar attendees 66.5% (492/740), P<.0001. Similarly significant, 40.1% (1101/2744) of live seminar attendees progressed to surgery versus 29.7% (220/740) of online attendees (P<.0001). Sex (78.2% female for live seminar versus 79.5% female for online seminar, P = .65) and initial body mass index (46.3 ± 7.4 for live seminar versus 45.3 ± 7.1 for online seminar, P = .09) were very similar between the groups. Online seminar attendees' age (42.7 ± 12.1) was younger than that of the live seminar attendees' (47.3 ± 12.3) (P<.0001) but has little clinical value. Our results demonstrated that live seminar attendees are more likely to progress to surgery and therefore should continue to be offered. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Plant-based solutions for veterinary immunotherapeutics and prophylactics.

PubMed

Kolotilin, Igor; Topp, Ed; Cox, Eric; Devriendt, Bert; Conrad, Udo; Joensuu, Jussi; Stöger, Eva; Warzecha, Heribert; McAllister, Tim; Potter, Andrew; McLean, Michael D; Hall, J Christopher; Menassa, Rima

2014-12-31

An alarming increase in emergence of antibiotic resistance among pathogens worldwide has become a serious threat to our ability to treat infectious diseases according to the World Health Organization. Extensive use of antibiotics by livestock producers promotes the spread of new resistant strains, some of zoonotic concern, which increases food-borne illness in humans and causes significant economic burden on healthcare systems. Furthermore, consumer preferences for meat/poultry/fish produced without the use of antibiotics shape today's market demand. So, it is viewed as inevitable by the One Health Initiative that humans need to reduce the use of antibiotics and turn to alternative, improved means to control disease: vaccination and prophylactics. Besides the intense research focused on novel therapeutic molecules, both these strategies rely heavily on the availability of cost-effective, efficient and scalable production platforms which will allow large-volume manufacturing for vaccines, antibodies and other biopharmaceuticals. Within this context, plant-based platforms for production of recombinant therapeutic proteins offer significant advantages over conventional expression systems, including lack of animal pathogens, low production costs, fast turnaround and response times and rapid, nearly-unlimited scalability. Also, because dried leaves and seeds can be stored at room temperature for lengthy periods without loss of recombinant proteins, plant expression systems have the potential to offer lucrative benefits from the development of edible vaccines and prophylactics, as these would not require "cold chain" storage and transportation, and could be administered in mass volumes with minimal processing. Several biotechnology companies currently have developed and adopted plant-based platforms for commercial production of recombinant protein therapeutics. In this manuscript, we outline the challenges in the process of livestock immunization as well as the current plant biotechnology developments aimed to address these challenges.

Structural characterization of a unique marine animal family 7 cellobiohydrolase suggests a mechanism of cellulase salt tolerance.

PubMed

Kern, Marcelo; McGeehan, John E; Streeter, Simon D; Martin, Richard N A; Besser, Katrin; Elias, Luisa; Eborall, Will; Malyon, Graham P; Payne, Christina M; Himmel, Michael E; Schnorr, Kirk; Beckham, Gregg T; Cragg, Simon M; Bruce, Neil C; McQueen-Mason, Simon J

2013-06-18

Nature uses a diversity of glycoside hydrolase (GH) enzymes to convert polysaccharides to sugars. As lignocellulosic biomass deconstruction for biofuel production remains costly, natural GH diversity offers a starting point for developing industrial enzymes, and fungal GH family 7 (GH7) cellobiohydrolases, in particular, provide significant hydrolytic potential in industrial mixtures. Recently, GH7 enzymes have been found in other kingdoms of life besides fungi, including in animals and protists. Here, we describe the in vivo spatial expression distribution, properties, and structure of a unique endogenous GH7 cellulase from an animal, the marine wood borer Limnoria quadripunctata (LqCel7B). RT-quantitative PCR and Western blot studies show that LqCel7B is expressed in the hepatopancreas and secreted into the gut for wood degradation. We produced recombinant LqCel7B, with which we demonstrate that LqCel7B is a cellobiohydrolase and obtained four high-resolution crystal structures. Based on a crystallographic and computational comparison of LqCel7B to the well-characterized Hypocrea jecorina GH7 cellobiohydrolase, LqCel7B exhibits an extended substrate-binding motif at the tunnel entrance, which may aid in substrate acquisition and processivity. Interestingly, LqCel7B exhibits striking surface charges relative to fungal GH7 enzymes, which likely results from evolution in marine environments. We demonstrate that LqCel7B stability and activity remain unchanged, or increase at high salt concentration, and that the L. quadripunctata GH mixture generally contains cellulolytic enzymes with highly acidic surface charge compared with enzymes derived from terrestrial microbes. Overall, this study suggests that marine cellulases offer significant potential for utilization in high-solids industrial biomass conversion processes.

Structural characterization of a unique marine animal family 7 cellobiohydrolase suggests a mechanism of cellulase salt tolerance

PubMed Central

Kern, Marcelo; McGeehan, John E.; Streeter, Simon D.; Martin, Richard N. A.; Besser, Katrin; Elias, Luisa; Eborall, Will; Malyon, Graham P.; Payne, Christina M.; Himmel, Michael E.; Schnorr, Kirk; Beckham, Gregg T.; Cragg, Simon M.; Bruce, Neil C.; McQueen-Mason, Simon J.

2013-01-01

Nature uses a diversity of glycoside hydrolase (GH) enzymes to convert polysaccharides to sugars. As lignocellulosic biomass deconstruction for biofuel production remains costly, natural GH diversity offers a starting point for developing industrial enzymes, and fungal GH family 7 (GH7) cellobiohydrolases, in particular, provide significant hydrolytic potential in industrial mixtures. Recently, GH7 enzymes have been found in other kingdoms of life besides fungi, including in animals and protists. Here, we describe the in vivo spatial expression distribution, properties, and structure of a unique endogenous GH7 cellulase from an animal, the marine wood borer Limnoria quadripunctata (LqCel7B). RT-quantitative PCR and Western blot studies show that LqCel7B is expressed in the hepatopancreas and secreted into the gut for wood degradation. We produced recombinant LqCel7B, with which we demonstrate that LqCel7B is a cellobiohydrolase and obtained four high-resolution crystal structures. Based on a crystallographic and computational comparison of LqCel7B to the well-characterized Hypocrea jecorina GH7 cellobiohydrolase, LqCel7B exhibits an extended substrate-binding motif at the tunnel entrance, which may aid in substrate acquisition and processivity. Interestingly, LqCel7B exhibits striking surface charges relative to fungal GH7 enzymes, which likely results from evolution in marine environments. We demonstrate that LqCel7B stability and activity remain unchanged, or increase at high salt concentration, and that the L. quadripunctata GH mixture generally contains cellulolytic enzymes with highly acidic surface charge compared with enzymes derived from terrestrial microbes. Overall, this study suggests that marine cellulases offer significant potential for utilization in high-solids industrial biomass conversion processes. PMID:23733951

Improved Oceanographic Measurements from SAR Altimetry: Results and Scientific Roadmap from the ESA Cryosat Plus for Oceans Project

NASA Astrophysics Data System (ADS)

Benveniste, J.; Cotton, D.; Andersen, O. B.; Boy, F.; Cancet, M.; Dinardo, S.; Gommenginger, C.; Egido, A.; Fernandes, J.; Garcia, P. N.; Lucas, B.; Moreau, T.; Naeije, M.; Scharroo, R.; Stenseng, L.

2014-12-01

The ESA CryoSat mission is the first space mission to carry a radar altimeter that can operate in Synthetic Aperture Radar (SAR) mode. It thus provides the first opportunity to test and evaluate, using real data, the significant potential benefits of SAR altimetry for ocean applications. The objective of the CryoSat Plus for Oceans (CP4O) project is to develop and evaluate new ocean products from CryoSat data and so maximize the scientific return of CryoSat over oceans. The main focus of CP4O has been on the additional measurement capabilities that are offered by the SAR mode of the SIRAL altimeter, with further work in developing improved geophysical corrections. CP4O has developed SAR based ocean products for application in four themes: Open Oceans, Coastal Oceans, Polar Oceans and Sea Floor Topography. The team has developed a number of new processing schemes and compared and evaluated the resultant data products. This work has clearly demonstrated the improved ocean measuring capability offered by SAR mode altimetry and has also added significantly to our understanding of the issues around the processing and interpretation of SAR altimeter echoes. The project finishes in the summer of 2014, so this paper presents an overview of the major results and outlines a proposed roadmap for the further development and exploitation of these results in operational and scientific applications. The results are of course also highly relevant to support the planning for future missions, including Sentinel-3 and Jason-CS. The "CryoSat Plus for Oceans" (CP4O) project has been supported by ESA (Support To Science Element) and CNES.

Aircraft family design using enhanced collaborative optimization

NASA Astrophysics Data System (ADS)

Roth, Brian Douglas

Significant progress has been made toward the development of multidisciplinary design optimization (MDO) methods that are well-suited to practical large-scale design problems. However, opportunities exist for further progress. This thesis describes the development of enhanced collaborative optimization (ECO), a new decomposition-based MDO method. To support the development effort, the thesis offers a detailed comparison of two existing MDO methods: collaborative optimization (CO) and analytical target cascading (ATC). This aids in clarifying their function and capabilities, and it provides inspiration for the development of ECO. The ECO method offers several significant contributions. First, it enhances communication between disciplinary design teams while retaining the low-order coupling between them. Second, it provides disciplinary design teams with more authority over the design process. Third, it resolves several troubling computational inefficiencies that are associated with CO. As a result, ECO provides significant computational savings (relative to CO) for the test cases and practical design problems described in this thesis. New aircraft development projects seldom focus on a single set of mission requirements. Rather, a family of aircraft is designed, with each family member tailored to a different set of requirements. This thesis illustrates the application of decomposition-based MDO methods to aircraft family design. This represents a new application area, since MDO methods have traditionally been applied to multidisciplinary problems. ECO offers aircraft family design the same benefits that it affords to multidisciplinary design problems. Namely, it simplifies analysis integration, it provides a means to manage problem complexity, and it enables concurrent design of all family members. In support of aircraft family design, this thesis introduces a new wing structural model with sufficient fidelity to capture the tradeoffs associated with component commonality, but of appropriate fidelity for aircraft conceptual design. The thesis also introduces a new aircraft family concept. Unlike most families, the intent is not necessarily to produce all family members. Rather, the family includes members for immediate production and members that address potential future market conditions and/or environmental regulations. The result is a set of designs that yield a small performance penalty today in return for significant future flexibility to produce family members that respond to new market conditions and environmental regulations.

Evaluation of the personal development portfolio in higher education: an explorative study.

PubMed

Head, Kevin S; Johnston, Jacqueline H

2012-11-01

Personal Development Profiles (PDPs) have been an important and necessary feature of United Kingdom (UK) Higher Education for more than a decade. There is significant agreement as to their core purpose and their key features are of relevance to higher education institutions internationally, irrespective of whether an equivalent formal system or process is in place. The aim of this exploratory study was to evaluate the use of PDPs within a Child Health Nursing Programme in a UK University, looking at the experiences of both teaching staff and of students coming to the end of their three year programme of study. A convenience sample of final year pre-registration Child Health Nursing students and their lecturers was used for the purposes of this study with mixed methods of collection used to generate the required data. A survey was conducted with questionnaires. Following the analysis of the questionnaires, a discussion group was undertaken with the students. A series of questions was developed to guide this discussion. The structure offered by the system of PDPs evaluated here was seen to offer much in the way of potential value. Staff saw it as offering direction, a tool for discussion and a clear time and reason for meeting their students. Students similarly appreciated the structure it provided, but did describe it as somewhat repetitive. These findings were clearly of use in terms of evaluating this ongoing work, but also offer the potential to inform the work of other educational institutions. Copyright © 2011 Elsevier Ltd. All rights reserved.

A comparison of four typical green exercise environments and prediction of psychological health outcomes.

PubMed

Rogerson, Mike; Brown, Daniel K; Sandercock, Gavin; Wooller, John-James; Barton, Jo

2016-05-01

'Green exercise' (GE) is physical activity while simultaneously being exposed to nature. GE comprises three physical components: the individual, the exercise and the environment, and one processes component encompassing a range of psychological and physiological processes. Previous research has consistently shown affective benefits of GE compared to equivalent non-GE. Investigating the possibility of optimum GE environments may help maximise health benefits. The aim of this study was to compare affective outcomes of GE participation between four different typical GE environments (beach, grasslands, riverside, heritage), and further examine influences of several physical component-related variables and one processes component-related variable, on these outcomes. Participants (N = 331) completed questionnaires before and after a 5km run, at one of four parkrun event locations. Self-esteem (Δ = 1.61, 95% confidence interval (CI) = (1.30, 1.93)), stress (Δ = -2.36, 95% CI = (-3.01, -1.71)) and mood (Δ = -5.25, 95% CI = (-7.45, -3.05)) all significantly improved from pre- to post-run (p < .05). Improvements in these measures were not significantly different between environments. Several component-related variables significantly predicted these improvements, accounting for 9% of self-esteem improvement, 1.6% of perceived stress improvement, and 9.5% of mood improvement. GE offers accessible provision for improving acute psychological wellbeing. Although nature-based exercise environments can facilitate affective outcomes, the overall type of nature may be less critical. Other characteristics of the individual, exercise and environment can significantly influence attainment of psychological GE benefits. However, the results support a greater importance of the processes component in attaining previously reported affective outcomes. © Royal Society for Public Health 2015.

FEL for the polymer processing industries

NASA Astrophysics Data System (ADS)

Kelley, Michael J.

1997-05-01

Polymers are everywhere in modern life because of their unique combination of end-use functionalities, ease of processing, recycling potential and modest cost. The physical and economic scope of the infrastructure committed to present polymers makes the introduction of entirely new chemistry unlikely. Rather, the breadth of commercial offerings more likely to shrink in the face of the widening mandate for recycling, especially of packaging. Improved performance and new functionality must therefore come by routes such as surface modification. However they must come with little environmental impact and at painfully low cost. Processing with strongly absorbed light offers unique advantages. The journal and patent literatures disclose a number of examples of benefits that can be achieved, principally by use of excimer lasers or special UV lamps. Examples of commercialization are few, however, because of the unit cost and maximum scale of existing light sources. A FEL, however, offers unique advantages: tunability to the optimum wavelength, potential for scale up to high average power, and a path to attractively low unit cost of light. A business analysis of prospective applications defines the technical and economic requirements a FEL for polymer surface processing must meet. These are compared to FEL technology as it now stands and as it is envisioned.

Information Technology Process Improvement Decision-Making: An Exploratory Study from the Perspective of Process Owners and Process Managers

ERIC Educational Resources Information Center

Lamp, Sandra A.

2012-01-01

There is information available in the literature that discusses information technology (IT) governance and investment decision making from an executive-level perception, yet there is little information available that offers the perspective of process owners and process managers pertaining to their role in IT process improvement and investment…

Low Temperature Performance of High-Speed Neural Network Circuits

NASA Technical Reports Server (NTRS)

Duong, T.; Tran, M.; Daud, T.; Thakoor, A.

1995-01-01

Artificial neural networks, derived from their biological counterparts, offer a new and enabling computing paradigm specially suitable for such tasks as image and signal processing with feature classification/object recognition, global optimization, and adaptive control. When implemented in fully parallel electronic hardware, it offers orders of magnitude speed advantage. Basic building blocks of the new architecture are the processing elements called neurons implemented as nonlinear operational amplifiers with sigmoidal transfer function, interconnected through weighted connections called synapses implemented using circuitry for weight storage and multiply functions either in an analog, digital, or hybrid scheme.

Emotion Regulation in Adolescent Males with Attention-Deficit Hyperactivity Disorder: Testing the Effects of Comorbid Conduct Disorder.

PubMed

Northover, Clare; Thapar, Anita; Langley, Kate; van Goozen, Stephanie

2015-09-07

Although attention-deficit hyperactivity disorder (ADHD) has been linked to emotion dysregulation, few studies have experimentally investigated this whilst controlling for the effects of comorbid conduct disorder (CD). Economic decision-making games that assess how individuals respond to offers varying in fairness have been used to study emotion regulation. The present study compared adolescent boys with ADHD (n = 90), ADHD + CD (n = 94) and typical controls (n = 47) on the Ultimatum Game and examined the contribution of ADHD and CD symptom scores and callous and unemotional traits to acceptance levels of unfair offers. There were no significant differences in acceptance rates of fair and highly unfair offers between groups, and only boys with ADHD did not significantly differ from the controls. However, the subgroup of boys with ADHD and additional high levels of aggressive CD symptoms rejected significantly more ambiguous (i.e., moderately unfair) offers than any other subgroup, suggesting impaired emotion regulation in those with ADHD and aggressive CD. Correlations within the CD group showed that the rejection rate to moderately unfair offers was predicted by aggressive CD symptom severity, but not callous and unemotional traits. These findings highlight the fact that ADHD is a heterogeneous condition from an emotion regulation point of view.

Regression-based statistical mediation and moderation analysis in clinical research: Observations, recommendations, and implementation.

PubMed

Hayes, Andrew F; Rockwood, Nicholas J

2017-11-01

There have been numerous treatments in the clinical research literature about various design, analysis, and interpretation considerations when testing hypotheses about mechanisms and contingencies of effects, popularly known as mediation and moderation analysis. In this paper we address the practice of mediation and moderation analysis using linear regression in the pages of Behaviour Research and Therapy and offer some observations and recommendations, debunk some popular myths, describe some new advances, and provide an example of mediation, moderation, and their integration as conditional process analysis using the PROCESS macro for SPSS and SAS. Our goal is to nudge clinical researchers away from historically significant but increasingly old school approaches toward modifications, revisions, and extensions that characterize more modern thinking about the analysis of the mechanisms and contingencies of effects. Copyright © 2016 Elsevier Ltd. All rights reserved.

Binary neutron star mergers: a review of Einstein's richest laboratory.

PubMed

Baiotti, Luca; Rezzolla, Luciano

2017-09-01

In a single process, the merger of binary neutron star systems combines extreme gravity, the copious emission of gravitational waves, complex microphysics and electromagnetic processes, which can lead to astrophysical signatures observable at the largest redshifts. We review here the recent progress in understanding what could be considered Einstein's richest laboratory, highlighting in particular the numerous significant advances of the last decade. Although special attention is paid to the status of models, techniques and results for fully general-relativistic dynamical simulations, a review is also offered on the initial data and advanced simulations with approximate treatments of gravity. Finally, we review the considerable amount of work carried out on the post-merger phase, including black-hole formation, torus accretion onto the merged compact object, the connection with gamma-ray burst engines, ejected material, and its nucleosynthesis.

Real-Time Payload Control and Monitoring on the World Wide Web

NASA Technical Reports Server (NTRS)

Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1998-01-01

World Wide Web (W3) technologies such as the Hypertext Transfer Protocol (HTTP) and the Java object-oriented programming environment offer a powerful, yet relatively inexpensive, framework for distributed application software development. This paper describes the design of a real-time payload control and monitoring system that was developed with W3 technologies at NASA Ames Research Center. Based on Java Development Toolkit (JDK) 1.1, the system uses an event-driven "publish and subscribe" approach to inter-process communication and graphical user-interface construction. A C Language Integrated Production System (CLIPS) compatible inference engine provides the back-end intelligent data processing capability, while Oracle Relational Database Management System (RDBMS) provides the data management function. Preliminary evaluation shows acceptable performance for some classes of payloads, with Java's portability and multimedia support identified as the most significant benefit.

Binary neutron star mergers: a review of Einstein’s richest laboratory

NASA Astrophysics Data System (ADS)

Baiotti, Luca; Rezzolla, Luciano

2017-09-01

In a single process, the merger of binary neutron star systems combines extreme gravity, the copious emission of gravitational waves, complex microphysics and electromagnetic processes, which can lead to astrophysical signatures observable at the largest redshifts. We review here the recent progress in understanding what could be considered Einstein’s richest laboratory, highlighting in particular the numerous significant advances of the last decade. Although special attention is paid to the status of models, techniques and results for fully general-relativistic dynamical simulations, a review is also offered on the initial data and advanced simulations with approximate treatments of gravity. Finally, we review the considerable amount of work carried out on the post-merger phase, including black-hole formation, torus accretion onto the merged compact object, the connection with gamma-ray burst engines, ejected material, and its nucleosynthesis.

Trainable hardware for dynamical computing using error backpropagation through physical media.

PubMed

Hermans, Michiel; Burm, Michaël; Van Vaerenbergh, Thomas; Dambre, Joni; Bienstman, Peter

2015-03-24

Neural networks are currently implemented on digital Von Neumann machines, which do not fully leverage their intrinsic parallelism. We demonstrate how to use a novel class of reconfigurable dynamical systems for analogue information processing, mitigating this problem. Our generic hardware platform for dynamic, analogue computing consists of a reciprocal linear dynamical system with nonlinear feedback. Thanks to reciprocity, a ubiquitous property of many physical phenomena like the propagation of light and sound, the error backpropagation-a crucial step for tuning such systems towards a specific task-can happen in hardware. This can potentially speed up the optimization process significantly, offering important benefits for the scalability of neuro-inspired hardware. In this paper, we show, using one experimentally validated and one conceptual example, that such systems may provide a straightforward mechanism for constructing highly scalable, fully dynamical analogue computers.

A qualitative meta-synthesis and theory of postpartum depression.

PubMed

Mollard, Elizabeth K

2014-09-01

To synthesize existing qualitative literature on the first-hand experiences of women suffering from postpartum depression (PPD), to uncover potential common themes, a meta-synthesis of 12 qualitative studies using Noblit and Hare's 7-phase model of meta-ethnography was used. Four themes were discovered: crushed maternal role expectation, going into hiding, loss of sense of self, intense feelings of vulnerability, plus practical life concerns. A preliminary theory of PPD as a 4-step process is proposed, based on the relationships between the themes in this meta-synthesis. This 4-step process is compared and contrasted with Cheryl Tatano Beck's 4-stage theory of PPD "Teetering on the Edge". This meta-synthesis and theory offers a significant contribution to the literature in helping identify PPD distinctly from depression outside of the postpartum period, and deserves further study.

Heterogeneous concurrent computing with exportable services

NASA Technical Reports Server (NTRS)

Sunderam, Vaidy

1995-01-01

Heterogeneous concurrent computing, based on the traditional process-oriented model, is approaching its functionality and performance limits. An alternative paradigm, based on the concept of services, supporting data driven computation, and built on a lightweight process infrastructure, is proposed to enhance the functional capabilities and the operational efficiency of heterogeneous network-based concurrent computing. TPVM is an experimental prototype system supporting exportable services, thread-based computation, and remote memory operations that is built as an extension of and an enhancement to the PVM concurrent computing system. TPVM offers a significantly different computing paradigm for network-based computing, while maintaining a close resemblance to the conventional PVM model in the interest of compatibility and ease of transition Preliminary experiences have demonstrated that the TPVM framework presents a natural yet powerful concurrent programming interface, while being capable of delivering performance improvements of upto thirty percent.

Maintenance of Certification®, Maintenance of Public Trust

PubMed Central

Chung, Kevin C.; Clapham, Philip J.; Lalonde, Donald H.

2010-01-01

The Maintenance of Certification® (MOC) program has been well received by many physicians, but faced significant opposition from others, who complain that it is overly tedious, costly, and irrelevant to their practice. This article offers a consolidated and concise history of the MOC program and a summary of what plastic surgeons need to know to successfully complete the American Board of Plastic Surgery’s (ABPS) own MOC requirements. The authors have justified each step of the ABPS’s MOC process in terms of how it improves the quality of care delivered to Plastic Surgery patients. Finally, a summary of research is presented that demonstrates both that the public supports the MOC process for all physicians and that continuing education and formal assessment and improvement initiatives have been linked in multiple studies to a better and more evidence-based medical practice. PMID:21285803

Trainable hardware for dynamical computing using error backpropagation through physical media

NASA Astrophysics Data System (ADS)

Hermans, Michiel; Burm, Michaël; van Vaerenbergh, Thomas; Dambre, Joni; Bienstman, Peter

2015-03-01

Neural networks are currently implemented on digital Von Neumann machines, which do not fully leverage their intrinsic parallelism. We demonstrate how to use a novel class of reconfigurable dynamical systems for analogue information processing, mitigating this problem. Our generic hardware platform for dynamic, analogue computing consists of a reciprocal linear dynamical system with nonlinear feedback. Thanks to reciprocity, a ubiquitous property of many physical phenomena like the propagation of light and sound, the error backpropagation—a crucial step for tuning such systems towards a specific task—can happen in hardware. This can potentially speed up the optimization process significantly, offering important benefits for the scalability of neuro-inspired hardware. In this paper, we show, using one experimentally validated and one conceptual example, that such systems may provide a straightforward mechanism for constructing highly scalable, fully dynamical analogue computers.

An Advanced User Interface Approach for Complex Parameter Study Process Specification in the Information Power Grid

NASA Technical Reports Server (NTRS)

Yarrow, Maurice; McCann, Karen M.; Biswas, Rupak; VanderWijngaart, Rob; Yan, Jerry C. (Technical Monitor)

2000-01-01

The creation of parameter study suites has recently become a more challenging problem as the parameter studies have now become multi-tiered and the computational environment has become a supercomputer grid. The parameter spaces are vast, the individual problem sizes are getting larger, and researchers are now seeking to combine several successive stages of parameterization and computation. Simultaneously, grid-based computing offers great resource opportunity but at the expense of great difficulty of use. We present an approach to this problem which stresses intuitive visual design tools for parameter study creation and complex process specification, and also offers programming-free access to grid-based supercomputer resources and process automation.

9 CFR 441.10 - Retained water.

Code of Federal Regulations, 2013 CFR

2013-01-01

... be permitted to retain water resulting from post-evisceration processing unless the establishment... that retain water from post-evisceration processing and that are sold, transported, offered for sale or... the establishment. Any post-evisceration washing or chilling processes that affect water retention...

9 CFR 441.10 - Retained water.

Code of Federal Regulations, 2011 CFR

2011-01-01

... be permitted to retain water resulting from post-evisceration processing unless the establishment... that retain water from post-evisceration processing and that are sold, transported, offered for sale or... the establishment. Any post-evisceration washing or chilling processes that affect water retention...

9 CFR 441.10 - Retained water.

Code of Federal Regulations, 2010 CFR

2010-01-01

... be permitted to retain water resulting from post-evisceration processing unless the establishment... that retain water from post-evisceration processing and that are sold, transported, offered for sale or... the establishment. Any post-evisceration washing or chilling processes that affect water retention...

9 CFR 441.10 - Retained water.

Code of Federal Regulations, 2012 CFR

2012-01-01

... be permitted to retain water resulting from post-evisceration processing unless the establishment... that retain water from post-evisceration processing and that are sold, transported, offered for sale or... the establishment. Any post-evisceration washing or chilling processes that affect water retention...

IT Employer and Graduate Assessments Regarding Preparedness in Skills of IT College Graduates Offered Employment

ERIC Educational Resources Information Center

Waldrop, Gerry L.

2017-01-01

Securing employment poses a significant problem for information technology (IT) college and university graduates. An overarching purpose of this research was to inform IT faculty, IT hiring managers and IT graduates of which 42 critical IT skills best predict the offering of jobs to graduates and how long it takes graduates to receive such offers.…

Influenza vaccination program for elderly outpatients.

PubMed

Knoell, K R; Leeds, A L

1991-02-01

The effect of pharmacist interventions on the rate at which elderly outpatients were offered influenza vaccination was studied. Pharmacists at a university-based ambulatory-care facility reviewed the medical records of a random sample of control patients over the age of 65 who had been seen during the influenza vaccination months in 1987 or 1988 or both years. The purpose was to estimate the percentage of patients who had been documented as being offered influenza vaccination. In 1989 an intervention program was undertaken consisting of inservice presentations to the facility's nursing staff, dissemination of influenza information sheets to patients upon check-in, placement of wall posters, placement of reminders in patient charts, and institution and advertisement of a vaccination clinic. At the end of the 1989 vaccination season, the records of a random sample of intervention group patients were reviewed to determine the proportion of patients who had been offered influenza virus vaccine. Of the 280 control group patients, 47% were offered influenza vaccination during 1987 and 1988. A significantly higher proportion of the 153 intervention group patients, 71%, was offered influenza vaccine during 1989. A combination of pharmacist-initiated interventions significantly increased the number of elderly patients who were offered vaccinations during scheduled clinic visits.

The amount of food ingested in a single meal by rainbow trout offered chopped herring, dry and wet diets

PubMed

Ruohonen; Grove; McIlroy

1997-07-01

Two-year-old 1·5-kg rainbow trout were held in cages and conditioned by feeding either on low-fat chopped herring (H trout) or dry pellets (P trout) for 15 weeks. Their satiation amounts were then determined under standard conditions. On a wet weight basis H trout ate 2·5-3·5 times more food than P trout; this was sufficient to compensate for the high water content of herring and thereby maintain the dry matter intake. When P trout were offered herring (PH trout) they consumed more food than when offered dry pellets but not as much as H trout. Stomach capacity restricted the intake and their dry matter intake was reduced by c. 40%. When H trout were offered dry pellets (HP trout) they adjusted their intake immediately close to the level of P trout although their larger stomachs could have accommodated more than twice this volume of dry food. The return of appetite after a satiation meal was almost linear with time. Appetite increased at c. 556 mg g-1 body weight h-1 for H trout and at 142 mg g-1 bw h-1 for P trout. The return of appetite in PH trout was significantly slower (c. 370 mg g-1 bw h-1) than in H trout; the previous dietary history of the PH trout limited their capacity to process larger volumes of wet food in a single meal. Fish offered dry diet (P and HP trout) had similar rates of appetite return despite their previous feeding history suggesting that the property of the dry feed itself might limit meal size. The total gastric emptying time of diets of similar dry matter content (with and without large amounts of water) was similar, but the delay time before gastric emptying starts tended to be longer for dry diets. Dry pellets appear to impose a demand for water that prolongs the gastric delay. This water demand is met partly by drinking since the trout fed on dry pellets drank significantly more (436±189 mg kg-1 h-1) than unfed and herring-fed trout which drank little or not at all (65±113 and 70±66 mg kg-1 h-1 respectively). Dietary water facilitated food processing and increased daily dry matter intake of trout when fed four times a day. When only one satiation meal per day was allowed, dietary water had no effect. It is concluded from this work that, in addition to gastric volume, a short-term limitation on the size of satiation meals in the rainbow trout is the availability of water to moisturize the food and thus to promote gastric digestion and emptying. 1997 The Fisheries Society of the British Isles

Integration of multiple research disciplines on the International Space Station

NASA Technical Reports Server (NTRS)

Penley, N. J.; Uri, J.; Sivils, T.; Bartoe, J. D.

2000-01-01

The International Space Station will provide an extremely high-quality, long-duration microgravity environment for the conduct of research. In addition, the ISS offers a platform for performing observations of Earth and Space from a high-inclination orbit, outside of the Earth's atmosphere. This unique environment and observational capability offers the opportunity for advancement in a diverse set of research fields. Many of these disciplines do not relate to one another, and present widely differing approaches to study, as well as different resource and operational requirements. Significant challenges exist to ensure the highest quality research return for each investigation. Requirements from different investigations must be identified, clarified, integrated and communicated to ISS personnel in a consistent manner. Resources such as power, crew time, etc. must be apportioned to allow the conduct of each investigation. Decisions affecting research must be made at the strategic level as well as at a very detailed execution level. The timing of the decisions can range from years before an investigation to real-time operations. The international nature of the Space Station program adds to the complexity. Each participating country must be assured that their interests are represented during the entire planning and operations process. A process for making decisions regarding research planning, operations, and real-time replanning is discussed. This process ensures adequate representation of all research investigators. It provides a means for timely decisions, and it includes a means to ensure that all ISS International Partners have their programmatic interests represented. c 2000 Published by Elsevier Science Ltd. All rights reserved.

Mars, Always Cold, Sometimes Wet: New Constraints on Mars Denudation Rates and Climate Evolution from Analog Studies at Haughton Crater, Devon Island, High Arctic

NASA Technical Reports Server (NTRS)

Lee, Pascal; Boucher, M.; Desportes, C.; Glass, B. J.; Lim, D.; McKay, C. P.; Osinski, G. R.; Parnell, J.; Schutt, J. W.

2005-01-01

Analysis of crater modification on Mars and at Haughton Crater, Devon Island, High Arctic, which was recently shown to be significantly older than previously believed (Eocene age instead of Miocene) [1], suggest that Mars may have never been climatically wet and warm for geological lengths of time during and since the Late Noachian. Impact structures offer particularly valuable records of the evolution of a planet s climate and landscape through time. The state of exposure and preservation of impact structures and their intracrater fill provide clues to the nature, timing, and intensity of the processes that have modified the craters since their formation. Modifying processes include weathering, erosion, mantling, and infilling. In this study, we compare the modification of Haughton through time with that of impact craters in the same size class on Mars. We derive upper limits for time-integrated denudation rates on Mars during and since the Late Noachian. These rates are significantly lower than previously published and provide important constraints for Mars climate evolution.

Optoelectronics technologies for Virtual Reality systems

NASA Astrophysics Data System (ADS)

Piszczek, Marek; Maciejewski, Marcin; Pomianek, Mateusz; Szustakowski, Mieczysław

2017-08-01

Solutions in the field of virtual reality are very strongly associated with optoelectronic technologies. This applies to both process design and operation of VR applications. Technologies such as 360 cameras and 3D scanners significantly improve the design work. What is more, HMD displays with high field of view or optoelectronic Motion Capture systems and 3D cameras guarantee an extraordinary experience in immersive VR applications. This article reviews selected technologies from the perspective of their use in a broadly defined process of creating and implementing solutions for virtual reality. There is also the ability to create, modify and adapt new approaches that show team own work (SteamVR tracker). Most of the introduced examples are effectively used by authors to create different VR applications. The use of optoelectronic technology in virtual reality is presented in terms of design and operation of the system as well as referring to specific applications. Designers and users of VR systems should take a close look on new optoelectronics solutions, as they can significantly contribute to increased work efficiency and offer completely new opportunities for virtual world reception.

Changes in cloud properties over East Asia deduced from the CLARA-A2 satellite data record

NASA Astrophysics Data System (ADS)

Benas, Nikos; Fokke Meirink, Jan; Hollmann, Rainer; Karlsson, Karl-Göran; Stengel, Martin

2017-04-01

Studies on cloud properties and processes, and their role in the Earth's changing climate, have advanced during the past decades. A significant part of this advance was enabled by satellite measurements, which offer global and continuous monitoring. Lately, a new satellite-based cloud data record was released: the CM SAF cLoud, Albedo and surface RAdiation dataset from AVHRR data - second edition (CLARA-A2) includes high resolution cloud macro- and micro-physical properties derived from the AVHRR instruments on board NOAA and MetOp polar orbiters. Based on this data record, an analysis of cloud property changes over East Asia during the 12-year period 2004-2015 was performed. Significant changes were found in both optical and geometric cloud properties, including increases in cloud liquid water path and top height. The Cloud Droplet Number Concentration (CDNC) was specifically studied in order to gain further insight into possible connections between aerosol and cloud processes. To this end, aerosol and cloud observations from MODIS, covering the same area and period, were included in the analysis.

Ethics and Oncofertility: A Call for Religious Sensitivity.

PubMed

Hanselin, Michele R; Roybal, Deborah L; Leininger, Thomas B

2017-07-01

For patients of reproductive age, treating cancer may come at the price of infertility. Literature regarding fertility preservation recommendations in this population has increased significantly, but this literature too often overlooks or insufficiently considers the relevance of religious preferences. Similarly, practice guidelines do not address the role of religion in the oncofertility discussion. The acceptance of oncofertility practices varies significantly among Christianity, Judaism, and Islam. A patient's faith-based spirituality or secular morality may enhance his or her interpretation of the meaning of illness and should be incorporated into the informed-consent process. In this article, we describe the role of religious sensitivity in oncofertility care and argue for its importance in such care. We briefly summarize the views and moral reasoning about oncofertility in a few religions commonly encountered in many patient populations today. We recommend that clinicians discuss fertility options early in the decision process and, when relevant, incorporate the patient's moral and religious preferences into the treatment plan. We encourage providers to be prepared to offer resources to patients who desire moral and spiritual guidance about fertility preservation options. Hospital chaplains should be able to provide such resources.

Radiation processing of natural polymers: The IAEA contribution

NASA Astrophysics Data System (ADS)

Haji-Saeid, Mohammad; Safrany, Agnes; Sampa, Maria Helena de O.; Ramamoorthy, Natesan

2010-03-01

Radiation processing offers a clean and additive-free method for preparation of value-added novel materials based on renewable, non-toxic, and biodegradable natural polymers. Crosslinked natural polymers can be used as hydrogel wound dressings, face cleaning cosmetic masks, adsorbents of toxins, and non-bedsore mats; while low molecular weight products show antibiotic, antioxidant, and plant-growth promoting properties. Recognizing the potential benefits that radiation technology can offer for processing of natural polymers into useful products, the IAEA implemented a coordinated research project (CRP) on "Development of Radiation-processed products of Natural Polymers for application in Agriculture, Healthcare, Industry and Environment". This CRP was launched at the end of 2007 with participation of 16 MS to help connecting radiation technology and end-users to derive enhanced benefits from these new value-added products of radiation-processed natural materials. In this paper the results of activities in participating MS related to this work will be presented.

Content Analysis of Informed Consent for Whole Genome Sequencing Offered by Direct-to-Consumer Genetic Testing Companies.

PubMed

Niemiec, Emilia; Borry, Pascal; Pinxten, Wim; Howard, Heidi Carmen

2016-12-01

Whole exome sequencing (WES) and whole genome sequencing (WGS) have become increasingly available in the research and clinical settings and are now also being offered by direct-to-consumer (DTC) genetic testing (GT) companies. This offer can be perceived as amplifying the already identified concerns regarding adequacy of informed consent (IC) for both WES/WGS and the DTC GT context. We performed a qualitative content analysis of Websites of four companies offering WES/WGS DTC regarding the following elements of IC: pre-test counseling, benefits and risks, and incidental findings (IFs). The analysis revealed concerns, including the potential lack of pre-test counseling in three of the companies studied, missing relevant information in the risks and benefits sections, and potentially misleading information for consumers. Regarding IFs, only one company, which provides opportunistic screening, provides basic information about their management. In conclusion, some of the information (and related practices) present on the companies' Web pages salient to the consent process are not adequate in reference to recommendations for IC for WGS or WES in the clinical context. Requisite resources should be allocated to ensure that commercial companies are offering high-throughput sequencing under responsible conditions, including an adequate consent process. © 2016 WILEY PERIODICALS, INC.

Fabrication of High Temperature Cermet Materials for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Hickman, Robert; Panda, Binayak; Shah, Sandeep

2005-01-01

Processing techniques are being developed to fabricate refractory metal and ceramic cermet materials for Nuclear Thermal Propulsion (NTP). Significant advances have been made in the area of high-temperature cermet fuel processing since RoverNERVA. Cermet materials offer several advantages such as retention of fission products and fuels, thermal shock resistance, hydrogen compatibility, high conductivity, and high strength. Recent NASA h d e d research has demonstrated the net shape fabrication of W-Re-HfC and other refractory metal and ceramic components that are similar to UN/W-Re cermet fuels. This effort is focused on basic research and characterization to identify the most promising compositions and processing techniques. A particular emphasis is being placed on low cost processes to fabricate near net shape parts of practical size. Several processing methods including Vacuum Plasma Spray (VPS) and conventional PM processes are being evaluated to fabricate material property samples and components. Surrogate W-Re/ZrN cermet fuel materials are being used to develop processing techniques for both coated and uncoated ceramic particles. After process optimization, depleted uranium-based cermets will be fabricated and tested to evaluate mechanical, thermal, and hot H2 erosion properties. This paper provides details on the current results of the project.

Prospects for reducing the processing cost of lithium ion batteries

DOE PAGES

Wood III, David L.; Li, Jianlin; Daniel, Claus

2014-11-06

A detailed processing cost breakdown is given for lithium-ion battery (LIB) electrodes, which focuses on: elimination of toxic, costly N-methylpyrrolidone (NMP) dispersion chemistry; doubling the thicknesses of the anode and cathode to raise energy density; and, reduction of the anode electrolyte wetting and SEI-layer formation time. These processing cost reduction technologies generically adaptable to any anode or cathode cell chemistry and are being implemented at ORNL. This paper shows step by step how these cost savings can be realized in existing or new LIB manufacturing plants using a baseline case of thin (power) electrodes produced with NMP processing and amore » standard 10-14-day wetting and formation process. In particular, it is shown that aqueous electrode processing can cut the electrode processing cost and energy consumption by an order of magnitude. Doubling the thickness of the electrodes allows for using half of the inactive current collectors and separators, contributing even further to the processing cost savings. Finally wetting and SEI-layer formation cost savings are discussed in the context of a protocol with significantly reduced time. These three benefits collectively offer the possibility of reducing LIB pack cost from $502.8 kWh-1-usable to $370.3 kWh-1-usable, a savings of $132.5/kWh (or 26.4%).« less

Share 35 Changes Center Level Liver Acceptance Practices

PubMed Central

Goldberg, David S.; Levine, Matthew; Karp, Seth; Gilroy, Richard; Peter, L

2017-01-01

Share 35 was implemented to provide improved access to organs for patients with MELD scores ≥35. However, little is known about the impact of Share 35 on organ offer acceptance rates. We evaluated all liver offers to adult patients that were ultimately transplanted between 1/1/2011–12/31/2015. The analyses focused on patients ranked in the top five positions of a given match run, and used multi-level mixed-effects models, clustering on individual waitlist candidate and transplant center. There was a significant interaction between Share 35 era and MELD category (p<0.001). Comparing offers to MELD score ≥35 patients, offers post-Share 35 were 36% less likely to be accepted compared to offers to MELD score ≥35 patients pre-Share 35 (adjusted OR: 0.64). There was no clinically meaningful difference in the DRI of livers that were declined for patients with an allocation MELD score ≥35 in the pre- vs post-Share 35 era. Organ offer acceptance rates for patients with an allocation MELD≥35 decreased in every region post-Share 35; the magnitude of these changes was bigger in regions 2, 3, 4, 5, 6, 7, and 11, compared to regions 8 and 9 that had regional sharing in place pre-Share 35. There were significant changes in organ offer acceptance rates at the center level pre- vs post-Share 35, and these changes varied across centers (p<0.001). Conclusions In liver transplant candidates achieving a MELD score ≥35, liver acceptance of offers declined significantly after implementation of Share 35. The alterations in behavior at the center level suggest that practice patterns changed as a direct result of Share 35. Changes in organ acceptance under even broader organ sharing (redistricting) would likely be even greater, posing major logistical and operational challenges, while potentially increasing discard rates, thus decreasing the total number of transplant nationally. PMID:28240804

A Course in Polymer Processing.

ERIC Educational Resources Information Center

Soong, David S.

1981-01-01

Following a brief introduction to the origin and nature of a course in polymer rheology and melt processing, discusses course objectives, detailed content, teaching strategies, and observations/experiences from its first offering. (SK)

COOCs over MOOCs

ERIC Educational Resources Information Center

Horton, Howard E.

2013-01-01

Massive open online courses (MOOCs) are all the rage these days and are being offered as a potential way to shorten the degree-attainment process and thereby reduce costs. At New England College of Business and Finance (NECB), staff focus on what the author likes to call "classically offered online classes" or COOCs, instead of MOOCs.…

30 CFR 585.215 - What areas will BOEM offer in a lease sale?

Code of Federal Regulations, 2014 CFR

2014-07-01

....215 Section 585.215 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases Competitive Lease Process § 585.215 What areas will BOEM offer in a...

30 CFR 585.215 - What areas will BOEM offer in a lease sale?

Code of Federal Regulations, 2012 CFR

2012-07-01

....215 Section 585.215 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases Competitive Lease Process § 585.215 What areas will BOEM offer in a...

30 CFR 585.215 - What areas will BOEM offer in a lease sale?

Code of Federal Regulations, 2013 CFR

2013-07-01

....215 Section 585.215 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases Competitive Lease Process § 585.215 What areas will BOEM offer in a...

30 CFR 585.1007 - What process will BOEM use for competitively offering an Alternate Use RUE?

Code of Federal Regulations, 2014 CFR

2014-07-01

... offering an Alternate Use RUE? 585.1007 Section 585.1007 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Rights of Use and Easement for Energy- and Marine-Related Activities Using...

30 CFR 585.1007 - What process will BOEM use for competitively offering an Alternate Use RUE?

Code of Federal Regulations, 2013 CFR

2013-07-01

... offering an Alternate Use RUE? 585.1007 Section 585.1007 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Rights of Use and Easement for Energy- and Marine-Related Activities Using...

30 CFR 585.1007 - What process will BOEM use for competitively offering an Alternate Use RUE?

Code of Federal Regulations, 2012 CFR

2012-07-01

... offering an Alternate Use RUE? 585.1007 Section 585.1007 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Rights of Use and Easement for Energy- and Marine-Related Activities Using...

Introduction to Communication, Grades PreK-2. The Math Process Standards Series

ERIC Educational Resources Information Center

O'Connell, Susan; O'Connor, Kelly

2007-01-01

In this book, the authors offer suggestions for teachers to help students explore, express, and better understand mathematical content through talking and writing. They offer an array of entry points for understanding, planning, and teaching, including strategies that help students put their ideas into words, clarify them, elaborate on them, and…

17 CFR 242.602 - Dissemination of quotations in NMS securities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... FUTURES Regulation Nms-Regulation of the National Market System § 242.602 Dissemination of quotations in..., processing such bids, offers, and sizes, and making such bids, offers, and sizes available to vendors, as... responsible broker or dealer other than an exchange market maker which is cancelled or withdrawn if not...

20 CFR 655.122 - Contents of job offers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Contents of job offers. 655.122 Section 655.122 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers)...

20 CFR 655.1304 - Contents of job offers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Contents of job offers. 655.1304 Section 655.1304 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) §...

78 FR 10574 - Premerger Notification; Reporting and Waiting Period Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

..., patterns, devices, manufacturing processes, or customer names. If you would like the Commission to give... service. Visit the Commission Web site at http://www.ftc.gov to read this Notice and the news release... of a tender offer under Sec. 801.30, that the intention to make the tender offer has been publicly...

Making Departments Distinctive: The Continuous Quality Improvement (CQI) Mindset.

ERIC Educational Resources Information Center

Chambliss, Catherine

The Continuous Quality Improvement (CQI) approach has provided many corporations with a tool for adapting to ongoing shifts in demands and resources, and it can offer academic settings similar assistance. CQI offers a mechanism for building a collaborative process that can help departments define their unique strengths and cultivate a distinctive…

Team Design Communication Patterns in e-Learning Design and Development

ERIC Educational Resources Information Center

Rapanta, Chrysi; Maina, Marcelo; Lotz, Nicole; Bacchelli, Alberto

2013-01-01

Prescriptive stage models have been found insufficient to describe the dynamic aspects of designing, especially in interdisciplinary e-learning design teams. There is a growing need for a systematic empirical analysis of team design processes that offer deeper and more detailed insights into instructional design (ID) than general models can offer.…

Principles and Practices of the Circle of Trust[R] Approach

ERIC Educational Resources Information Center

Chadsey, Terry; Jackson, Marcy

2012-01-01

Through the Center for Courage & Renewal, the authors offer personal and professional retreats and programs designed to explore vocational and life questions, offer renewal and encouragement, and deepen engagement in professional practice. Using what they call the Circle of Trust[R] approach, they invite groups into a communal process based upon a…

77 FR 75235 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... FINRA Fee Change also amended FINRA's Fingerprint Processing Fees. In 2012, FINRA only offered one set... third submission). For 2013, FINRA is offering two sets of fees. For fingerprints submitted on paper... third submission. For fingerprints submitted electronically, the fees will be $29.50 per initial...

48 CFR 27.406-3 - Major system acquisition.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracting officer shall review the technical data and the contractor's declaration relating to it to assure... procured by the Government and also relating to the design, development, or manufacture of products or processes offered or to be offered for sale to the public (except for such data as may be necessary for the...

Learning through Artful Knowing

ERIC Educational Resources Information Center

van Meer, Pleuntje

2016-01-01

In this paper, van Meer offers an exploration in the context of action learning doctoral research in which she explores leadership consultancy practice. The purpose is to grow insight on learning as a lived experience. Artful knowing offers a way to learn about life and practice, through a deeply personal, reflective and sense-making process. The…

A Novel Texture-Quantization-Based Reversible Multiple Watermarking Scheme Applied to Health Information System.

PubMed

Turuk, Mousami; Dhande, Ashwin

2018-04-01

The recent innovations in information and communication technologies have appreciably changed the panorama of health information system (HIS). These advances provide new means to process, handle, and share medical images and also augment the medical image security issues in terms of confidentiality, reliability, and integrity. Digital watermarking has emerged as new era that offers acceptable solutions to the security issues in HIS. Texture is a significant feature to detect the embedding sites in an image, which further leads to substantial improvement in the robustness. However, considering the perspective of digital watermarking, this feature has received meager attention in the reported literature. This paper exploits the texture property of an image and presents a novel hybrid texture-quantization-based approach for reversible multiple watermarking. The watermarked image quality has been accessed by peak signal to noise ratio (PSNR), structural similarity measure (SSIM), and universal image quality index (UIQI), and the obtained results are superior to the state-of-the-art methods. The algorithm has been evaluated on a variety of medical imaging modalities (CT, MRA, MRI, US) and robustness has been verified, considering various image processing attacks including JPEG compression. The proposed scheme offers additional security using repetitive embedding of BCH encoded watermarks and ADM encrypted ECG signal. Experimental results achieved a maximum of 22,616 bits hiding capacity with PSNR of 53.64 dB.

Optimizability of OGC Standards Implementations - a Case Study

NASA Astrophysics Data System (ADS)

Misev, D.; Baumann, P.

2012-04-01

Why do we shop at Amazon? Because they have a unique offering that is nowhere else available? Certainly not. Rather, Amazon offers (i) simple, yet effective search; (ii) very simple payment; (iii) extremely rapid delivery. This is how scientific services will be distinguished in future: not for their data holding (there will be manifold choice), but for their service quality. We are facing the transition from data stewardship to service stewardship. One of the OGC standards which particularly enables flexible retrieval is the Web Coverage Processing Service (WCPS). It defines a high-level query language on large, multi-dimensional raster data, such as 1D timeseries, 2D EO imagery, 3D x/y/t image time series and x/y/z geophysical data, 4D x/y/z/t climate and ocean data. We have implemented WCPS based on an Array Database Management System, rasdaman, which is available in open source. In this demonstration, we study WCPS queries on 2D, 3D, and 4D data sets. Particular emphasis is placed on the computational load queries generate in such on-demand processing and filtering. We look at different techniques and their impact on performance, such as adaptive storage partitioning, query rewriting, and just-in-time compilation. Results show that there is significant potential for effective server-side optimization once a query language is sufficiently high-level and declarative.

Design and development of wafer-level near-infrared micro-camera

NASA Astrophysics Data System (ADS)

Zeller, John W.; Rouse, Caitlin; Efstathiadis, Harry; Haldar, Pradeep; Dhar, Nibir K.; Lewis, Jay S.; Wijewarnasuriya, Priyalal; Puri, Yash R.; Sood, Ashok K.

2015-08-01

SiGe offers a low-cost alternative to conventional infrared sensor material systems such as InGaAs, InSb, and HgCdTe for developing near-infrared (NIR) photodetector devices that do not require cooling and can offer high bandwidths and responsivities. As a result of the significant difference in thermal expansion coefficients between germanium and silicon, tensile strain incorporated into Ge epitaxial layers deposited on Si utilizing specialized growth processes can extend the operational range of detection to 1600 nm and longer wavelengths. We have fabricated SiGe based PIN detector devices on 300 mm diameter Si wafers in order to take advantage of high throughput, large-area complementary metal-oxide semiconductor (CMOS) technology. This device fabrication process involves low temperature epitaxial deposition of Ge to form a thin p+ seed/buffer layer, followed by higher temperature deposition of a thicker Ge intrinsic layer. An n+-Ge layer formed by ion implantation of phosphorus, passivating oxide cap, and then top copper contacts complete the PIN photodetector design. Various techniques including transmission electron microscopy (TEM) and secondary ion mass spectrometry (SIMS) have been employed to characterize the material and structural properties of the epitaxial growth and fabricated detector devices. In addition, electrical characterization was performed to compare the I-V dark current vs. photocurrent response as well as the time and wavelength varying photoresponse properties of the fabricated devices, results of which are likewise presented.

Gender preferences in the choice of a pediatric dental residency program.

PubMed

da Fonseca, Marcio A; Stiers, Matthew L

2009-09-01

The goal of this study was to investigate whether men and women applying for graduate training in pediatric dentistry placed different emphasis on the same factors and program characteristics upon making their final ranking decision. A questionnaire was mailed to the first-year resident class in the United States in 2005 containing both multiple-choice and open-ended questions covering six sections: 1) candidate's background, 2) the application process, 3) program characteristics, 4) nonclinical factors, 5) clinical factors, and 6) the interview process. In sections three through six, respondents ranked factors and characteristics from "not important" or "no influence" to "critical." The response rate was 69.2 percent (180/260), with approximately 57.8 percent females (104/180) and 61.4 percent non-Hispanic white respondents (110/180). Statistically significant differences between genders were as follows: 1) men were older (29.4 years versus 28.1, p<0.05); 2) men applied to more programs (9.9 vs. 8.1, p<0.05); 3) women preferred programs affiliated with their own dental school (p=0.046); 4) women preferred university-based programs (p=0.049); 5) women preferred programs that offered a high amount of patient care under general anesthesia (p=0.040); and 6) women placed more importance on the salary/stipend amount offered by the programs (p=0.045).

Thirty years and counting: Finding meaning in the N400 component of the event related brain potential (ERP)

PubMed Central

Kutas, Marta; Federmeier, Kara D.

2014-01-01

We overview the discovery, characterization, and evolving use of the N400, an event-related brain potential response linked to meaning processing. We describe the elicitation of N400s by an impressive range of stimulus types -- including written, spoken, and signed (pseudo)words, drawings, photos, and videos of faces, objects and actions, sounds, and mathematical symbols -- and outline the sensitivity of N400 amplitude (as its latency is remarkably constant) to linguistic and nonlinguistic manipulations. We emphasize the effectiveness of the N400 as a dependent variable for examining almost every aspect of language processing, and highlight its expanding use to probe semantic memory and to determine how the neurocognitive system dynamically and flexibly uses bottom-up and top-down information to make sense of the world. We conclude with different theories of the N400’s functional significance and offer an N400-inspired re-conceptualization of how meaning processing might unfold. PMID:20809790

Improving the efficiency of selection to Core Medical Training: a study of the use of multiple assessment stations.

PubMed

Atkinson, J M; Tullo, E; Mitchison, H; Pearce, M S; Kumar, N

2012-06-01

To compare three separate assessment stations used for selection to Core Medical Training (CMT) and to determine the effect of reducing the number from three to two. Quantitative analysis of candidates' assessment station scores, financial analysis of costs of the selection process and quantitative and qualitative surveys of candidates and assessors. The assessment stations used for selection to CMT were reliable and valid for assessing suitability for employment as a CMT trainee. There was no significant difference in candidate ranking if only two assessment stations were used rather than three, i.e. there was no change in the likelihood of receiving a job offer. All of the assessment stations were perceived to have face validity by candidates and assessors. The efficiency of the selection process could be improved without loss of quality if two stations were used rather than three. Using two assessment stations rather than three would appear to improve the efficiency and maintain the quality of the CMT selection process while reducing costs.

Investigations on effect of laser-induced self-assembled patterning on optical properties of flexible polyimide substrates for solar cell applications

NASA Astrophysics Data System (ADS)

Shukla, Ashish K.; Yadav, Vinayak M.; Kumar, Akash; Palani, I. A.; Manivannan, Anbarasu

2018-01-01

Polyimide (PI) offers promising features such as high strength and excellent thermal stability for flexible solar panels. The flexible solar cell demands maximum absorption of solar insolation through stacked layers to enhance its performance. However, the fluorescence emission (FE) in inactive polyimide substrate hinders the absorption of irradiated solar energy. In this research work, an attempt has been made to generate rippled morphology on PI substrate using laser processing that enhances the absorption and moderates the FE. These changes are confirmed by calculating the Urbach energy (Eu) of the rippled structure, which is found to be 2.5 times that of the pristine substrate. Furthermore, to reduce the FE, tungsten (W) was coated on the rippled structure of the laser-processed PI, and a significant reduction of 70% FE is achieved compared to the FE of unprocessed PI. These enhanced characteristics of PI obtained by laser processing will be highly helpful for improving the overall performance of flexible solar cells.

Enzyme leaps fuel antichemotaxis

PubMed Central

Jee, Ah-Young; Dutta, Sandipan; Cho, Yoon-Kyoung

2018-01-01

There is mounting evidence that enzyme diffusivity is enhanced when the enzyme is catalytically active. Here, using superresolution microscopy [stimulated emission-depletion fluorescence correlation spectroscopy (STED-FCS)], we show that active enzymes migrate spontaneously in the direction of lower substrate concentration (“antichemotaxis”) by a process analogous to the run-and-tumble foraging strategy of swimming microorganisms and our theory quantifies the mechanism. The two enzymes studied, urease and acetylcholinesterase, display two families of transit times through subdiffraction-sized focus spots, a diffusive mode and a ballistic mode, and the latter transit time is close to the inverse rate of catalytic turnover. This biochemical information-processing algorithm may be useful to design synthetic self-propelled swimmers and nanoparticles relevant to active materials. Executed by molecules lacking the decision-making circuitry of microorganisms, antichemotaxis by this run-and-tumble process offers the biological function to homogenize product concentration, which could be significant in situations when the reactant concentration varies from spot to spot. PMID:29255047

Microvalve-based bioprinting - process, bio-inks and applications.

PubMed

Ng, Wei Long; Lee, Jia Min; Yeong, Wai Yee; Win Naing, May

2017-03-28

Bioprinting is an emerging research field that has attracted tremendous attention for various applications; it offers a highly automated, advanced manufacturing platform for the fabrication of complex bioengineered constructs. Different bio-inks comprising multiple types of printable biomaterials and cells are utilized during the bioprinting process to improve the homology to native tissues and/or organs in a highly reproducible manner. This paper, presenting a first-time comprehensive yet succinct review of microvalve-based bioprinting, provides an in-depth analysis and comparison of different drop-on-demand bioprinting systems and highlights the important considerations for microvalve-based bioprinting systems. This review paper reports a detailed analysis of its printing process, bio-ink properties and cellular components on the printing outcomes. Lastly, this review highlights the significance of drop-on-demand bioprinting for various applications such as high-throughput screening, fundamental cell biology research, in situ bioprinting and fabrication of in vitro tissue constructs and also presents future directions to transform the microvalve-based bioprinting technology into imperative tools for tissue engineering and regenerative medicine.

Looking without Perceiving: Impaired Preattentive Perceptual Grouping in Autism Spectrum Disorder

PubMed Central

Carther-Krone, Tiffany A.; Shomstein, Sarah; Marotta, Jonathan J.

2016-01-01

Before becoming aware of a visual scene, our perceptual system has organized and selected elements in our environment to which attention should be allocated. Part of this process involves grouping perceptual features into a global whole. Individuals with autism spectrum disorders (ASD) rely on a more local processing strategy, which may be driven by difficulties perceptually grouping stimuli. We tested this notion using a line discrimination task in which two horizontal lines were superimposed on a background of black and white dots organized so that, on occasion, the dots induced the Ponzo illusion if perceptually grouped together. Results showed that even though neither group was aware of the illusion, the ASD group was significantly less likely than typically developing group to make perceptual judgments influenced by the illusion, revealing difficulties in preattentive grouping of visual stimuli. This may explain why individuals with ASD rely on local processing strategies, and offers new insight into the mechanism driving perceptual grouping in the typically developing human brain. PMID:27355678

Ambulatory Assessment.

PubMed

Carpenter, Ryan W; Wycoff, Andrea M; Trull, Timothy J

2016-08-01

In recent years, significant technological advances have changed our understanding of dynamic processes in clinical psychology. A particularly important agent of change has been ambulatory assessment (AA). AA is the assessment of individuals in their daily lives, combining the twin benefits of increased ecological validity and minimized retrospective biases. These benefits make AA particularly well-suited to the assessment of dynamic processes, and recent advancements in technology are providing exciting new opportunities to understand these processes in new ways. In the current article, we briefly detail the capabilities currently offered by smartphones and mobile physiological devices, as well as some of the practical and ethical challenges of incorporating these new technologies into AA research. We then provide several examples of recent innovative applications of AA methodology in clinical research, assessment, and intervention and provide a case example of AA data generated from a study utilizing multiple mobile devices. In this way, we aim to provide a sense of direction for researchers planning AA studies of their own.

Network design and quality checks in automatic orientation of close-range photogrammetric blocks.

PubMed

Dall'Asta, Elisa; Thoeni, Klaus; Santise, Marina; Forlani, Gianfranco; Giacomini, Anna; Roncella, Riccardo

2015-04-03

Due to the recent improvements of automatic measurement procedures in photogrammetry, multi-view 3D reconstruction technologies are becoming a favourite survey tool. Rapidly widening structure-from-motion (SfM) software packages offer significantly easier image processing workflows than traditional photogrammetry packages. However, while most orientation and surface reconstruction strategies will almost always succeed in any given task, estimating the quality of the result is, to some extent, still an open issue. An assessment of the precision and reliability of block orientation is necessary and should be included in every processing pipeline. Such a need was clearly felt from the results of close-range photogrammetric surveys of in situ full-scale and laboratory-scale experiments. In order to study the impact of the block control and the camera network design on the block orientation accuracy, a series of Monte Carlo simulations was performed. Two image block configurations were investigated: a single pseudo-normal strip and a circular highly-convergent block. The influence of surveying and data processing choices, such as the number and accuracy of the ground control points, autofocus and camera calibration was investigated. The research highlights the most significant aspects and processes to be taken into account for adequate in situ and laboratory surveys, when modern SfM software packages are used, and evaluates their effect on the quality of the results of the surface reconstruction.

μ-Rainbow: CdSe Nanocrystal Photoluminescence Gradients via Laser Spike Annealing for Kinetic Investigations and Tunable Device Design.

PubMed

Treml, Benjamin E; Jacobs, Alan G; Bell, Robert T; Thompson, Michael O; Hanrath, Tobias

2016-02-10

Much of the promise of nanomaterials derives from their size-dependent, and hence tunable, properties. Impressive advances have been made in the synthesis of nanoscale building blocks with precisely tailored size, shape and composition. Significant attention is now turning toward creating thin film structures in which size-dependent properties can be spatially programmed with high fidelity. Nonequilibrium processing techniques present exciting opportunities to create nanostructured thin films with unprecedented spatial control over their optical and electronic properties. Here, we demonstrate single scan laser spike annealing (ssLSA) on CdSe nanocrystal (NC) thin films as an experimental test bed to illustrate how the size-dependent photoluminescence (PL) emission can be tuned throughout the visible range and in spatially defined profiles during a single annealing step. Through control of the annealing temperature and time, we discovered that NC fusion is a kinetically limited process with a constant activation energy in over 2 orders of magnitude of NC growth rate. To underscore the broader technological implications of this work, we demonstrate the scalability of LSA to process large area NC films with periodically modulated PL emission, resulting in tunable emission properties of a large area film. New insights into the processing-structure-property relationships presented here offer significant advances in our fundamental understanding of kinetics of nanomaterials as well as technological implications for the production of nanomaterial films.

44 CFR 78.6 - Flood Mitigation Plan approval process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... approval process. 78.6 Section 78.6 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY... MITIGATION ASSISTANCE § 78.6 Flood Mitigation Plan approval process. The State POC will forward all Flood... reasons for non-approval and offer suggestions for improvement. ...

Text Processing and Formatting: Composure, Composition and Eros.

ERIC Educational Resources Information Center

Blair, John C., Jr.

1984-01-01

Review of computer software offering text editing/processing capabilities highlights work habits, elements of computer style and composition, buffers, the CRT, line- and screen-oriented text editors, video attributes, "swapping,""cache" memory, "disk emulators," text editing versus text processing, and UNIX operating…

Survey of the Definition of Fetal Viability and the Availability, Indications, and Decision Making Processes for Post-Viability Termination of Pregnancy for Fetal Abnormalities and Health Conditions in Canada.

PubMed

Hull, Danna; Davies, Gregory; Armour, Christine M

2016-06-01

The purpose of this study was to explore the definition of fetal viability and the availability, indications, and decision making processes for post-viability termination of pregnancy for fetal abnormalities and health conditions in Canada. An online survey of members of the Canadian Association of Genetic Counsellors, the Canadian College of Medical Geneticists, and the Canadian Society for Maternal-Fetal Medicine who provide direct counselling to, or management of, prenatal patients in Canada (total sample size 815). Results of this study showed that the majority of respondents indicated that their centre will offer post-viability termination of pregnancy (98/123; 80 %). Sixty-seven percent (68/101) of respondents reported the definition of fetal viability to be 24 weeks' gestation. Most respondents reported that a collaborative decision making process was used to determine if post-viability termination of pregnancy would be offered (136/170; 80 %). For conditions presumed to be lethal/likely lethal, the majority of respondents would "sometimes" or "always" offer post-viability termination of pregnancy, whereas for conditions presumed to have a mild effect, the majority of respondents would "rarely" or "never" offer post-viability termination of pregnancy. Ninety percent (77/86) of respondents reported that perinatal hospice is offered as an alternative to termination of pregnancy. In conclusion, this study suggests that although post-viability termination is available in many provinces in Canada, variation in the definition of fetal viability and indications appear to exist. While these variations may lead to unequal access to post-viability termination of pregnancy across Canada, they might also represent the complexity of the decision making process and the importance of examining individual factors to ensure that the most appropriate decision is made in each case.

Complexity in electronic negotiation support systems.

PubMed

Griessmair, Michele; Strunk, Guido; Vetschera, Rudolf; Koeszegi, Sabine T

2011-10-01

It is generally acknowledged that the medium influences the way we communicate and negotiation research directs considerable attention to the impact of different electronic communication modes on the negotiation process and outcomes. Complexity theories offer models and methods that allow the investigation of how pattern and temporal sequences unfold over time in negotiation interactions. By focusing on the dynamic and interactive quality of negotiations as well as the information, choice, and uncertainty contained in the negotiation process, the complexity perspective addresses several issues of central interest in classical negotiation research. In the present study we compare the complexity of the negotiation communication process among synchronous and asynchronous negotiations (IM vs. e-mail) as well as an electronic negotiation support system including a decision support system (DSS). For this purpose, transcripts of 145 negotiations have been coded and analyzed with the Shannon entropy and the grammar complexity. Our results show that negotiating asynchronically via e-mail as well as including a DSS significantly reduces the complexity of the negotiation process. Furthermore, a reduction of the complexity increases the probability of reaching an agreement.

Musical melody and speech intonation: singing a different tune.

PubMed

Zatorre, Robert J; Baum, Shari R

2012-01-01

Music and speech are often cited as characteristically human forms of communication. Both share the features of hierarchical structure, complex sound systems, and sensorimotor sequencing demands, and both are used to convey and influence emotions, among other functions [1]. Both music and speech also prominently use acoustical frequency modulations, perceived as variations in pitch, as part of their communicative repertoire. Given these similarities, and the fact that pitch perception and production involve the same peripheral transduction system (cochlea) and the same production mechanism (vocal tract), it might be natural to assume that pitch processing in speech and music would also depend on the same underlying cognitive and neural mechanisms. In this essay we argue that the processing of pitch information differs significantly for speech and music; specifically, we suggest that there are two pitch-related processing systems, one for more coarse-grained, approximate analysis and one for more fine-grained accurate representation, and that the latter is unique to music. More broadly, this dissociation offers clues about the interface between sensory and motor systems, and highlights the idea that multiple processing streams are a ubiquitous feature of neuro-cognitive architectures.

Solution-Processed Donor-Acceptor Polymer Nanowire Network Semiconductors For High-Performance Field-Effect Transistors

PubMed Central

Lei, Yanlian; Deng, Ping; Li, Jun; Lin, Ming; Zhu, Furong; Ng, Tsz-Wai; Lee, Chun-Sing; Ong, Beng S.

2016-01-01

Organic field-effect transistors (OFETs) represent a low-cost transistor technology for creating next-generation large-area, flexible and ultra-low-cost electronics. Conjugated electron donor-acceptor (D-A) polymers have surfaced as ideal channel semiconductor candidates for OFETs. However, high-molecular weight (MW) D-A polymer semiconductors, which offer high field-effect mobility, generally suffer from processing complications due to limited solubility. Conversely, the readily soluble, low-MW D-A polymers give low mobility. We report herein a facile solution process which transformed a lower-MW, low-mobility diketopyrrolopyrrole-dithienylthieno[3,2-b]thiophene (I) into a high crystalline order and high-mobility semiconductor for OFETs applications. The process involved solution fabrication of a channel semiconductor film from a lower-MW (I) and polystyrene blends. With the help of cooperative shifting motion of polystyrene chain segments, (I) readily self-assembled and crystallized out in the polystyrene matrix as an interpenetrating, nanowire semiconductor network, providing significantly enhanced mobility (over 8 cm2V−1s−1), on/off ratio (107), and other desirable field-effect properties that meet impactful OFET application requirements. PMID:27091315

Academic Primer Series: Five Key Papers for Consulting Clinician Educators.

PubMed

Chan, Teresa M; Gottlieb, Michael; Quinn, Antonia; London, Kory; Conlon, Lauren W; Ankel, Felix

2017-02-01

Clinician educators are often asked to perform consultations for colleagues. Invitations to consult and advise others on local problems can help foster great collaborations between centers, and allows for an exchange of ideas between programs. In this article, the authors identify and summarize several key papers to assist emerging clinician educators with the consultation process. A consensus-building process was used to generate a list of key papers that describe the importance and significance of educational consulting, informed by social media sources. A three-round voting methodology, akin to a Delphi study, determined the most impactful papers from the larger list. Summaries of the five most highly rated papers on education consultation are presented in this paper. These papers were determined by a mixed group of junior and senior faculty members, who have summarized these papers with respect to their relevance for their peer groups. Five key papers on the educational consultation process are presented in this paper. These papers offer background and perspective to help junior faculty gain a grasp of consultation processes.

Interdisciplinary research on the application of ERTS-1 data to the regional land use planning process

NASA Technical Reports Server (NTRS)

Clapp, J. L. (Principal Investigator); Kiefer, R. W.; Mccarthy, M. M.; Niemann, B. J., Jr.

1972-01-01

The author has identified the following significant results. Although the degree to which ERTS-1 imagery can satisfy regional land use planning data needs is not yet known, it appears to offer means by which the data acquisition process can be immeasurably improved. The initial experiences of an interdisciplinary group attempting to formulate ways of analyzing the effectiveness of ERTS-1 imagery as a base for environmental monitoring and the resolution of regional land allocation problems are documented. Application of imagery to the regional planning process consists of utilizing representative geographical regions within the state of Wisconsin. Because of the need to describe and depict regional resource complexity in an interrelatable state, certain resources within the geographical regions have been inventoried and stored in a two-dimensional computer-based map form. Computer oriented processes were developed to provide for the economical storage, analysis, and spatial display of natural and cultural data for regional land use planning purposes. The authors are optimistic that the imagery will provide revelant data for land use decision making at regional levels.

Solution-Processed Carbon Nanotube True Random Number Generator.

PubMed

Gaviria Rojas, William A; McMorrow, Julian J; Geier, Michael L; Tang, Qianying; Kim, Chris H; Marks, Tobin J; Hersam, Mark C

2017-08-09

With the growing adoption of interconnected electronic devices in consumer and industrial applications, there is an increasing demand for robust security protocols when transmitting and receiving sensitive data. Toward this end, hardware true random number generators (TRNGs), commonly used to create encryption keys, offer significant advantages over software pseudorandom number generators. However, the vast network of devices and sensors envisioned for the "Internet of Things" will require small, low-cost, and mechanically flexible TRNGs with low computational complexity. These rigorous constraints position solution-processed semiconducting single-walled carbon nanotubes (SWCNTs) as leading candidates for next-generation security devices. Here, we demonstrate the first TRNG using static random access memory (SRAM) cells based on solution-processed SWCNTs that digitize thermal noise to generate random bits. This bit generation strategy can be readily implemented in hardware with minimal transistor and computational overhead, resulting in an output stream that passes standardized statistical tests for randomness. By using solution-processed semiconducting SWCNTs in a low-power, complementary architecture to achieve TRNG, we demonstrate a promising approach for improving the security of printable and flexible electronics.

Extrusion-spheronization: process variables and characterization.

PubMed

Sinha, V R; Agrawal, M K; Agarwal, A; Singh, G; Ghai, D

2009-01-01

Multiparticulate systems have undergone great development in the past decade fueled by the better understanding of their multiple roles as a suitable delivery system. With the passage of time, significant advances have been made in the process of pelletization due to the incorporation of specialized techniques for their development. Extrusion-spheronization seems to be the most promising process for the optimum delivery of many potent drugs having high systemic toxicity. It also offers immense pharmaceutical applicability due to the benefits of high loading capacity of active ingredient(s), narrow size distribution, and cost-effectiveness. On application of a specific coat, these systems can also aid in site-specific delivery, thereby enhancing the bioavailability of many drugs. The current review focuses on the process of extrusion-spheronization and the operational (extruder types, screen pressure, screw speed, temperature, moisture content, spheronization load, speed and time) and formulation (excipients and drugs) variables, which may affect the quality of the final pellets. Various methods for the evaluation of the quality of the pellets with regard to the size distribution, shape, friability, granule strength, density, porosity, flow properties, and surface texture are discussed.

Is the destabilization of the cournot equilibrium a good business strategy in cournot-puu duopoly?

PubMed

Canovas, Jose S

2011-10-01

It is generally acknowledged that the medium influences the way we communicate and negotiation research directs considerable attention to the impact of different electronic communication modes on the negotiation process and outcomes. Complexity theories offer models and methods that allow the investigation of how pattern and temporal sequences unfold over time in negotiation interactions. By focusing on the dynamic and interactive quality of negotiations as well as the information, choice, and uncertainty contained in the negotiation process, the complexity perspective addresses several issues of central interest in classical negotiation research. In the present study we compare the complexity of the negotiation communication process among synchronous and asynchronous negotiations (IM vs. e-mail) as well as an electronic negotiation support system including a decision support system (DSS). For this purpose, transcripts of 145 negotiations have been coded and analyzed with the Shannon entropy and the grammar complexity. Our results show that negotiating asynchronically via e-mail as well as including a DSS significantly reduces the complexity of the negotiation process. Furthermore, a reduction of the complexity increases the probability of reaching an agreement.

Color is processed less efficiently than orientation in change detection but more efficiently in visual search.

PubMed

Huang, Liqiang

2015-05-01

Basic visual features (e.g., color, orientation) are assumed to be processed in the same general way across different visual tasks. Here, a significant deviation from this assumption was predicted on the basis of the analysis of stimulus spatial structure, as characterized by the Boolean-map notion. If a task requires memorizing the orientations of a set of bars, then the map consisting of those bars can be readily used to hold the overall structure in memory and will thus be especially useful. If the task requires visual search for a target, then the map, which contains only an overall structure, will be of little use. Supporting these predictions, the present study demonstrated that in comparison to stimulus colors, bar orientations were processed more efficiently in change-detection tasks but less efficiently in visual search tasks (Cohen's d = 4.24). In addition to offering support for the role of the Boolean map in conscious access, the present work also throws doubts on the generality of processing visual features. © The Author(s) 2015.

Preparation of Nonhuman Primate Eyes for Histological Evaluation After Retinal Gene Transfer.

PubMed

Bell, Peter; Yu, Hongwei; Kuntz, Leah; Ahonkhai, Omua; Tretiakova, Anna; Limberis, Maria P; Wilson, James M

2018-06-01

To evaluate gene therapy for retinal disorders, appropriate models of the human eye are needed. Nonhuman primate eyes offer significant advantages over rodent eyes. However, current preparation methods have limitations. Here, a protocol is described for histological processing of nonhuman primate eyes after gene transfer. The user dissects unfixed eyes, flattens the globe parts within filter paper, and performs formalin fixation and paraffin embedding. This method obviates the need for harsh fixatives, allowing subsequent immunostaining or in situ hybridization while preserving tissue integrity for histopathological evaluation. Moreover, the straight orientation of the retinal cell layers is ideal for image analysis.

Integrated Optical Circuit Engineering For Optical Fiber Gyrocopes

NASA Astrophysics Data System (ADS)

Bristow, Julian P.; We, Albert C.; Keur, M.; Lukas, Greg; Ott, Daniel M...; Sriram, S.

1988-03-01

Fiber optic gyroscopes are of interest for low-cost, high performance rotation sensors. Integrated optical implementations of the processing optics offer the hope of mass-production, and associated cost reductions. The development of a suitable integrated optical system has been reported by other authors at a wavelength of 850nm [1]. Despite strong technical advantages at 1.3μm wavelength [2], no results have yet appeared. This wavelength is preferred for telecommunications applications applications, thus significantly reduced fiber costs may be realized. Lithium niobate is relatively immune from the photorefractive effect at this wavelength, whereas it is not at at 850nm [3].

NASA Out-of-Autoclave Process Technology Development

NASA Technical Reports Server (NTRS)

Johnston, Norman, J.; Clinton, R. G., Jr.; McMahon, William M.

2000-01-01

Polymer matrix composites (PMCS) will play a significant role in the construction of large reusable launch vehicles (RLVs), mankind's future major access to low earth orbit and the international space station. PMCs are lightweight and offer attractive economies of scale and automated fabrication methodology. Fabrication of large RLV structures will require non-autoclave methods which have yet to be matured including (1) thermoplastic forming: heated head robotic tape placement, sheet extrusion, pultrusion, molding and forming; (2) electron beam curing: bulk and ply-by-ply automated placement; (3) RTM and VARTM. Research sponsored by NASA in industrial and NASA laboratories on automated placement techniques involving the first 2 categories will be presented.

The CRISPR/Cas9 system sheds new lights on the biology of protozoan parasites.

PubMed

Grzybek, Maciej; Golonko, Aleksandra; Górska, Aleksandra; Szczepaniak, Klaudiusz; Strachecka, Aneta; Lass, Anna; Lisowski, Paweł

2018-06-01

The CRISPR/Cas9 system, a natural defence system of bacterial organisms, has recently been used to modify genomes of the most important protozoa parasites. Successful genome manipulations with the CRISPR/Cas9 system are changing the present view of genetics in parasitology. The application of this system offers a major chance to overcome the current restriction in culturing, maintaining and analysing protozoan parasites, and allows dynamic analysis of parasite genes functions, leading to a better understanding of pathogenesis. CRISPR/Cas9 system will have a significant influence on the process of developing novel drugs and treatment strategies against protozoa parasites.

Binder free MnO2/PIn electrode material for supercapacitor application

NASA Astrophysics Data System (ADS)

Purty, B.; Choudhary, R. B.; Kandulna, R.; Singh, R.

2018-05-01

Electrochemically stable MnO2/PIn nanocomposite was synthesized via in-situ chemical oxidative polymerization process. The structural and morphological properties were studied through FTIR and FESEM characterizing techniques. Sphere like PIn and MnO2 nanorods offers interacting surface for charge transfer action. The electrochemical properties were investigated through cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopic (EIS) techniques. The significant enhancement in capacitance value with 95% coulombic efficiency and relatively low equivalent series resistance (ESR)˜0.4 Ω proved that MnO2/PIn nanocomposite is an excellent performer as an electrode material in the spectrum of supercapcitors and optoelectronic devices.

The Vocational Significance of Black Identity: Cultural Formulation Approach to Career Assessment and Career Counseling

PubMed Central

Byars-Winston, Angela M.

2010-01-01

Scholarship is emerging on intervention models that purposefully attend to cultural variables throughout the career assessment and career counseling process (Swanson & Fouad, in press). One heuristic model that offers promise to advance culturally-relevant vocational practice with African Americans is the Outline for Cultural Formulation (American Psychiatric Association, 1994). This article explicates the Outline for Cultural Formulation in career assessment and career counseling with African Americans integrating the concept of cultural identity into the entire model. The article concludes with an illustration of the Outline for Cultural Formulation model with an African American career client. PMID:20495668

An Approach for Removing Redundant Data from RFID Data Streams

PubMed Central

Mahdin, Hairulnizam; Abawajy, Jemal

2011-01-01

Radio frequency identification (RFID) systems are emerging as the primary object identification mechanism, especially in supply chain management. However, RFID naturally generates a large amount of duplicate readings. Removing these duplicates from the RFID data stream is paramount as it does not contribute new information to the system and wastes system resources. Existing approaches to deal with this problem cannot fulfill the real time demands to process the massive RFID data stream. We propose a data filtering approach that efficiently detects and removes duplicate readings from RFID data streams. Experimental results show that the proposed approach offers a significant improvement as compared to the existing approaches. PMID:22163730

Neurolinguistic measures of typological effects in multilingual transfer: introducing an ERP methodology

PubMed Central

Rothman, Jason; Alemán Bañón, José; González Alonso, Jorge

2015-01-01

This article has two main objectives. First, we offer an introduction to the subfield of generative third language (L3) acquisition. Concerned primarily with modeling initial stages transfer of morphosyntax, one goal of this program is to show how initial stages L3 data make significant contributions toward a better understanding of how the mind represents language and how (cognitive) economy constrains acquisition processes more generally. Our second objective is to argue for and demonstrate how this subfield will benefit from a neuro/psycholinguistic methodological approach, such as event-related potential experiments, to complement the claims currently made on the basis of exclusively behavioral experiments. PMID:26300800

The creativity of Crumb: research on the effects of psychedelic drugs on the comic art of Robert Crumb.

PubMed

Jones, Matthew T

2007-09-01

This article investigates the influence of perception that is altered by psychedelic drugs on processes of creativity through a case study of the work of well-known comic artist Robert Crumb. Samples of Crumb's work before, during, and after the period of his use of psychedelic drugs are content analyzed and compared according to the categorization offered by Janiger and Dobkin de Rios (1989). The results of the comparison indicate that Robert Crumb's drug use significantly altered the stylistic approach of his artwork not only during the period of his drug use, but long after he had stopped using drugs.

Leasing instruments of high-rise construction financing

NASA Astrophysics Data System (ADS)

Aleksandrova, Olga; Ivleva, Elena; Sukhacheva, Viktoria; Rumyantseva, Anna

2018-03-01

The leasing sector of the business economics is expanding. Leasing instruments for high-rise construction financing allow to determine the best business behaviour in the leasing economy sector, not only in the sphere of transactions with equipment and vehicles. Investments in high-rise construction have a multiplicative effect. It initiates an active search and leasing instruments use in the economic behaviour of construction organizations. The study of the high-rise construction sector in the structure of the leasing market participants significantly expands the leasing system framework. The scheme of internal and external leasing process factors influence on the result formation in the leasing sector of economy is offered.

The Role of Bioreactors in Ligament and Tendon Tissue Engineering.

PubMed

Mace, James; Wheelton, Andy; Khan, Wasim S; Anand, Sanj

2016-01-01

Bioreactors are pivotal to the emerging field of tissue engineering. The formation of neotissue from pluripotent cell lineages potentially offers a source of tissue for clinical use without the significant donor site morbidity associated with many contemporary surgical reconstructive procedures. Modern bioreactor design is becoming increasingly complex to provide a both an expandable source of readily available pluripotent cells and to facilitate their controlled differentiation into a clinically applicable ligament or tendon like neotissue. This review presents the need for such a method, challenges in the processes to engineer neotissue and the current designs and results of modern bioreactors in the pursuit of engineered tendon and ligament.

Prosody's Contribution to Fluency: An Examination of the Theory of Automatic Information Processing

ERIC Educational Resources Information Center

Schrauben, Julie E.

2010-01-01

LaBerge and Samuels' (1974) theory of automatic information processing in reading offers a model that explains how and where the processing of information occurs and the degree to which processing of information occurs. These processes are dependent upon two criteria: accurate word decoding and automatic word recognition. However, LaBerge and…

Turbine blade processing

NASA Technical Reports Server (NTRS)

1975-01-01

Space processing of directionally solidified eutectic-alloy type turbine blades is envisioned as a simple remelt operations in which precast blades are remelted in a preformed mold. Process systems based on induction melting, continuous resistance furnaces, and batch resistance furnaces were evaluated. The batch resistance furnace type process using a multiblade mold is considered to offer the best possibility for turbine blade processing.

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2013 CFR

2013-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

17 CFR 230.260 - Insignificant deviations from a term, condition or requirement of Regulation A.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for any offer or sale to a particular individual or entity, if the person relying on the exemption... respect to the offering as a whole, provided that any failure to comply with paragraphs (a), (b), (d) (1) and (3) Of § 230.251 shall be deemed to be significant to the offering as a whole; and (3) A good...

A capital idea. Bonds and nontraditional financing options.

PubMed

Wareham, Therese L

2004-05-01

Not-for-profit healthcare organizations have four basic sources of capital: internal sources, philanthropy, asset sales, and external sources. External sources, in particular, offer a wealth of options that are important for such organizations--especially those facing significant capital shortfalls--to consider. External sources include bond offerings and nontraditional offerings, such as receivables financing, off-balance-sheet options, real estate investment trusts, and subordinated securities.

DataSpread: Unifying Databases and Spreadsheets.

PubMed

Bendre, Mangesh; Sun, Bofan; Zhang, Ding; Zhou, Xinyan; Chang, Kevin ChenChuan; Parameswaran, Aditya

2015-08-01

Spreadsheet software is often the tool of choice for ad-hoc tabular data management, processing, and visualization, especially on tiny data sets. On the other hand, relational database systems offer significant power, expressivity, and efficiency over spreadsheet software for data management, while lacking in the ease of use and ad-hoc analysis capabilities. We demonstrate DataSpread, a data exploration tool that holistically unifies databases and spreadsheets. It continues to offer a Microsoft Excel-based spreadsheet front-end, while in parallel managing all the data in a back-end database, specifically, PostgreSQL. DataSpread retains all the advantages of spreadsheets, including ease of use, ad-hoc analysis and visualization capabilities, and a schema-free nature, while also adding the advantages of traditional relational databases, such as scalability and the ability to use arbitrary SQL to import, filter, or join external or internal tables and have the results appear in the spreadsheet. DataSpread needs to reason about and reconcile differences in the notions of schema, addressing of cells and tuples, and the current "pane" (which exists in spreadsheets but not in traditional databases), and support data modifications at both the front-end and the back-end. Our demonstration will center on our first and early prototype of the DataSpread, and will give the attendees a sense for the enormous data exploration capabilities offered by unifying spreadsheets and databases.

DataSpread: Unifying Databases and Spreadsheets

PubMed Central

Bendre, Mangesh; Sun, Bofan; Zhang, Ding; Zhou, Xinyan; Chang, Kevin ChenChuan; Parameswaran, Aditya

2015-01-01

Spreadsheet software is often the tool of choice for ad-hoc tabular data management, processing, and visualization, especially on tiny data sets. On the other hand, relational database systems offer significant power, expressivity, and efficiency over spreadsheet software for data management, while lacking in the ease of use and ad-hoc analysis capabilities. We demonstrate DataSpread, a data exploration tool that holistically unifies databases and spreadsheets. It continues to offer a Microsoft Excel-based spreadsheet front-end, while in parallel managing all the data in a back-end database, specifically, PostgreSQL. DataSpread retains all the advantages of spreadsheets, including ease of use, ad-hoc analysis and visualization capabilities, and a schema-free nature, while also adding the advantages of traditional relational databases, such as scalability and the ability to use arbitrary SQL to import, filter, or join external or internal tables and have the results appear in the spreadsheet. DataSpread needs to reason about and reconcile differences in the notions of schema, addressing of cells and tuples, and the current “pane” (which exists in spreadsheets but not in traditional databases), and support data modifications at both the front-end and the back-end. Our demonstration will center on our first and early prototype of the DataSpread, and will give the attendees a sense for the enormous data exploration capabilities offered by unifying spreadsheets and databases. PMID:26900487

Neural responses to unfairness and fairness depend on self-contribution to the income.

PubMed

Guo, Xiuyan; Zheng, Li; Cheng, Xuemei; Chen, Menghe; Zhu, Lei; Li, Jianqi; Chen, Luguang; Yang, Zhiliang

2014-10-01

Self-contribution to the income (individual achievement) was an important factor which needs to be taken into individual's fairness considerations. This study aimed at elucidating the modulation of self-contribution to the income, on recipient's responses to unfairness in the Ultimatum Game. Eighteen participants were scanned while they were playing an adapted version of the Ultimatum Game as responders. Before splitting money, the proposer and the participant (responder) played the ball-guessing game. The responder's contribution to the income was manipulated by both the participant's and the proposer's accuracy in the ball-guessing game. It turned out that the participants more often rejected unfair offers and gave lower fairness ratings when they played a more important part in the earnings. At the neural level, anterior insula, anterior cingulate cortex, dorsolateral prefrontal cortex and temporoparietal junction showed greater activities to unfairness when self-contribution increased, whereas ventral striatum and medial orbitofrontal gyrus showed higher activations to fair (vs unfair) offers in the other-contributed condition relative to the other two. Besides, the activations of right dorsolateral prefrontal cortex during unfair offers showed positive correlation with rejection rates in the self-contributed condition. These findings shed light on the significance of self-contribution in fairness-related social decision-making processes. © The Author (2013). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Photomask etch system and process for 10nm technology node and beyond

NASA Astrophysics Data System (ADS)

Chandrachood, Madhavi; Grimbergen, Michael; Yu, Keven; Leung, Toi; Tran, Jeffrey; Chen, Jeff; Bivens, Darin; Yalamanchili, Rao; Wistrom, Richard; Faure, Tom; Bartlau, Peter; Crawford, Shaun; Sakamoto, Yoshifumi

2015-10-01

While the industry is making progress to offer EUV lithography schemes to attain ultimate critical dimensions down to 20 nm half pitch, an interim optical lithography solution to address an immediate need for resolution is offered by various integration schemes using advanced PSM (Phase Shift Mask) materials including thin e-beam resist and hard mask. Using the 193nm wavelength to produce 10nm or 7nm patterns requires a range of optimization techniques, including immersion and multiple patterning, which place a heavy demand on photomask technologies. Mask schemes with hard mask certainly help attain better selectivity and hence better resolution but pose integration challenges and defectivity issues. This paper presents a new photomask etch solution for attenuated phase shift masks that offers high selectivity (Cr:Resist > 1.5:1), tighter control on the CD uniformity with a 3sigma value approaching 1 nm and controllable CD bias (5-20 nm) with excellent CD linearity performance (<5 nm) down to the finer resolution. The new system has successfully demonstrated capability to meet the 10 nm node photomask CD requirements without the use of more complicated hard mask phase shift blanks. Significant improvement in post wet clean recovery performance was demonstrated by the use of advanced chamber materials. Examples of CD uniformity, linearity, and minimum feature size, and etch bias performance on 10 nm test site and production mask designs will be shown.

Non-price competition in NHS secondary care contracting: empirical results.

PubMed

Gray, Keith; Bailey, Mark F

2008-01-01

The purpose of this paper is, for English acute NHS hospitals, to investigate how they operate their governance systems in the area of secondary care contracting and identify the key determinants of relationship building within the contacting/commissioning of secondary care focusing upon non-price competitive behaviour. A survey instrument was designed and mailed to a sample of all acute NHS hospitals in England of whom 35 per cent responded. This survey was then analysed using logit techniques. The analysis suggests that: those NHS Trusts offering volume discounts, non-price competitive incentives or having a strong belief in performance being by "payment by results" criteria are significantly more likely to offer augmented services to secondary care purchasers over and above contractual minima; those NHS Trusts strongly believing in the importance of non-price factors (such as contract augmentation or quality) in the contracting process are more likely to offer customisation of generic services; and those NHS Trusts using cost-sharing agreements to realign contracts when negotiating contracts or who strongly believe in the importance of service augmentation in strengthening relationships, or that increased hospital efficiency is the most important aspect of recent NHS reform are more likely to utilise default measures to help realign contracts. This paper fills a gap in the area of non-price competition in English NHS acute secondary care contracting.