Life-Cycle Analysis of Energy Use, Greenhouse Gas Emissions, and Water Consumption in the 2016 MYPP Algal Biofuel Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frank, Edward; Pegallapati, Ambica; Davis, Ryan

2016-06-16

The Department of Energy (DOE) Bioenergy Technologies Office (BETO) Multi-year Program Plan (MYPP) describes the bioenergy objectives pursued by BETO, the strategies for achieving those objectives, the current state of technology (SOT), and a number of design cases that explore cost and operational performance required to advance the SOT towards middle and long term goals (MYPP, 2016). Two options for converting algae to biofuel intermediates were considered in the MYPP, namely algal biofuel production via lipid extraction and algal biofuel production by thermal processing. The first option, lipid extraction, is represented by the Combined Algae Processing (CAP) pathway in whichmore » algae are hydrolyzed in a weak acid pretreatment step. The treated slurry is fermented for ethanol production from sugars. The fermentation stillage contains most of the lipids from the original biomass, which are recovered through wet solvent extraction. The process residuals after lipid extraction, which contain much of the original mass of amino acids and proteins, are directed to anaerobic digestion (AD) for biogas production and recycle of N and P nutrients. The second option, thermal processing, comprises direct hydrothermal liquefaction (HTL) of the wet biomass, separation of aqueous, gas, and oil phases, and treatment of the aqueous phase with catalytic hydrothermal gasification (CHG) to produce biogas and to recover N and P nutrients.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frank, Edward; Pegallapati, Ambica K.; Davis, Ryan

The Department of Energy (DOE) Bioenergy Technologies Office (BETO) Multi-year Program Plan (MYPP) describes the bioenergy objectives pursued by BETO, the strategies for achieving those objectives, the current state of technology (SOT), and a number of design cases that explore cost and operational performance required to advance the SOT towards middle and long term goals (MYPP, 2016). Two options for converting algae to biofuel intermediates were considered in the MYPP, namely algal biofuel production via lipid extraction and algal biofuel production by thermal processing. The first option, lipid extraction, is represented by the Combined Algae Processing (CAP) pathway in whichmore » algae are hydrolyzed in a weak acid pretreatment step. The treated slurry is fermented for ethanol production from sugars. The fermentation stillage contains most of the lipids from the original biomass, which are recovered through wet solvent extraction. The process residuals after lipid extraction, which contain much of the original mass of amino acids and proteins, are directed to anaerobic digestion (AD) for biogas production and recycle of N and P nutrients. The second option, thermal processing, comprises direct hydrothermal liquefaction (HTL) of the wet biomass, separation of aqueous, gas, and oil phases, and treatment of the aqueous phase with catalytic hydrothermal gasification (CHG) to produce biogas and to recover N and P nutrients. The present report describes a life cycle analysis of energy use and greenhouse gas (GHG) emissions of the CAP and HTL options for the three scenarios just described. Water use is also reported. Water use during algal biofuel production comes from evaporation during cultivation, discharge to bleed streams to control pond salinity (“blowdown”), and from use during preprocessing and upgrading. For scenarios considered to date, most water use was from evaporation and, secondarily, from bleed streams. Other use was relatively small at the level of fidelity being modeled now.« less

Sustainable development of process facilities: state-of-the-art review of pollution prevention frameworks.

PubMed

Hossain, Khandoker A; Khan, Faisal I; Hawboldt, Kelly

2008-01-15

Pollution prevention (P2) strategy is receiving significant attention in industries all over the world, over end-of-pipe pollution control and management strategy. This paper is a review of the existing pollution prevention frameworks. The reviewed frameworks contributed significantly to bring the P2 approach into practice and gradually improved it towards a sustainable solution; nevertheless, some objectives are yet to be achieved. In this context, the paper has proposed a P2 framework 'IP2M' addressing the limitations for systematic implementation of the P2 program in industries at design as well as retrofit stages. The main features of the proposed framework are that, firstly, it has integrated cradle-to-gate life cycle assessment (LCA) tool with other adequate P2 opportunity analysis tools in P2 opportunity analysis phase and secondly, it has re-used the risk-based cradle-to-gate LCA during the environmental evaluation of different P2 options. Furthermore, in multi-objective optimization phase, it simultaneously considers the P2 options with available end-of-pipe control options in order to select the sustainable environmental management option.

Deciding How to Stay Independent at Home in Later Years: Development and Acceptability Testing of an Informative Web-Based Module.

PubMed

Garvelink, Mirjam Marjolein; Jones, C Allyson; Archambault, Patrick M; Roy, Noémie; Blair, Louisa; Légaré, France

2017-12-14

Seniors with loss of autonomy may face decisions about whether they should stay at home or move elsewhere. Most seniors would prefer to stay home and be independent for as long as possible, but most are unaware of options that would make this possible. The study aimed to develop and test the acceptability of an interactive website for seniors, their caregivers, and health professionals with short interlinked videos presenting information about options for staying independent at home. The approach for design and data collection varied, involving a multipronged, user-centered design of the development process, qualitative interviews, and end-user feedback to determine content (ie, needs assessment) in phase I; module development (in English and French) in phase II; and survey to test usability and acceptability with end users in phase III. Phase I participants were a convenience sample of end users, that is, seniors, caregivers, and professionals with expertise in modifiable factors (eg, day centers, home redesign, equipment, community activities, and finances), enabling seniors to stay independent at home for longer in Quebec and Alberta, Canada. Phase II participants were bilingual actors; phase III participants included phase I participants and new participants recruited through snowballing. Qualitative interviews were thematically analyzed in phase II to determine relevant topics for the video-scripts, which were user-checked by interview participants. In phase III, the results of a usability questionnaire were analyzed using descriptive statistics. In phase I, interviews with 29 stakeholders, including 4 seniors, 3 caregivers, and 22 professionals, showed a need for a one-stop information resource about options for staying independent at home. They raised issues relating to 6 categories: cognitive autonomy, psychological or mental well-being, functional autonomy, social autonomy, financial autonomy, and people involved. A script was developed and evaluated by participants. In phase II, after 4 days in a studio with 15 bilingual actors, 30 videos were made of various experts (eg, family doctor, home care nurse, and social worker) presenting options and guidance for the decision-making process. These were integrated into an interactive website, which included a comments tool for visitors to add information. In phase III (n=21), 8 seniors (7 women, mean age 75 years), 7 caregivers, and 6 professionals evaluated the acceptability of the module and suggested improvements. Clarity of the videos scored 3.6 out of 4, length was considered right by 17 (separate videos) and 13 participants (all videos together), and 18 participants considered the module acceptable. They suggested that information should be tailored more, and that seniors may need someone to help navigate it. Our interactive website with interlinked videos presenting information about options for staying independent at home was deemed acceptable and potentially helpful by a diverse group of stakeholders. ©Mirjam Marjolein Garvelink, C Allyson Jones, Patrick M Archambault, Noémie Roy, Louisa Blair, France Légaré. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 14.12.2017.

Process for preparing zinc oxide-based sorbents

DOEpatents

Gangwal, Santosh Kumar [Cary, NC; Turk, Brian Scott [Durham, NC; Gupta, Raghubir Prasad [Durham, NC

2011-06-07

The disclosure relates to zinc oxide-based sorbents, and processes for preparing and using them. The sorbents are preferably used to remove one or more reduced sulfur species from gas streams. The sorbents comprise an active zinc component, optionally in combination with one or more promoter components and/or one or more substantially inert components. The active zinc component is a two phase material, consisting essentially of a zinc oxide (ZnO) phase and a zinc aluminate (ZnAl.sub.2O.sub.4) phase. Each of the two phases is characterized by a relatively small crystallite size of typically less than about 500 Angstroms. Preferably the sorbents are prepared by converting a precursor mixture, comprising a precipitated zinc oxide precursor and a precipitated aluminum oxide precursor, to the two-phase, active zinc oxide containing component.

NOVEL CERAMIC MEMBRANE BIOREACTOR FOR LOW-FLOW SYSTEMS - PHASE I

EPA Science Inventory

Improved low-flow (50,000 gallons per day) sanitary wastewater treatment systems are needed. CeraMem Corporation's proposed approach includes a membrane bioreactor (MBR) using fully proven biological processes for biological oxygen demand oxidation and (optionally) fo...

Phase 4 Studies in Heart Failure - What is Done and What is Needed?

PubMed

Iyngkaran, Pupalan; Liew, Danny; McDonald, Peter; Thomas, Merlin C; Reid, Christopher; Chew, Derek; Hare, David L

Congestive heart failure (CHF) therapeutics is generated through a well-described evidence generating process. Phases 1 - 3 of this process are required prior to approval and widespread clinical use. Phase 3 in almost all cases is a methodologically sound randomized controlled trial (RCT). After this phase it is generally accepted that the treatment has a significant, independent and prognostically beneficial effect on the pathophysiological process. A major criticism of RCTs is the population to whom the result is applicable. When this population is significantly different from the trial cohort the external validity comes into question. Should the continuation of the evidence generating process continue these problems might be identified. Post marketing surveillance through phase 4 and comparative effectiveness studies through phase 5 trials are often underperformed in comparison to the RCT. These processes can help identify remote adverse events and define new hypotheses for community level benefits. This review is aimed at exploring the post-marketing scene for CHF therapeutics from an Australian health system perspective. We explore the phases of clinical trials, the level of evidence currently available and options for ensuring greater accountability for community level CHF clinical outcomes.

Phase 4 Studies in Heart Failure - What is Done and What is Needed?

PubMed Central

Iyngkaran, Pupalan; Liew, Danny; McDonald, Peter; Thomas, Merlin C.; Reid, Christopher; Chew, Derek; Hare, David L.

2016-01-01

Congestive heart failure (CHF) therapeutics is generated through a well-described evidence generating process. Phases 1 – 3 of this process are required prior to approval and widespread clinical use. Phase 3 in almost all cases is a methodologically sound randomized controlled trial (RCT). After this phase it is generally accepted that the treatment has a significant, independent and prognostically beneficial effect on the pathophysiological process. A major criticism of RCTs is the population to whom the result is applicable. When this population is significantly different from the trial cohort the external validity comes into question. Should the continuation of the evidence generating process continue these problems might be identified. Post marketing surveillance through phase 4 and comparative effectiveness studies through phase 5 trials are often underperformed in comparison to the RCT. These processes can help identify remote adverse events and define new hypotheses for community level benefits. This review is aimed at exploring the post-marketing scene for CHF therapeutics from an Australian health system perspective. We explore the phases of clinical trials, the level of evidence currently available and options for ensuring greater accountability for community level CHF clinical outcomes. PMID:27280303

A Study of Phased Array Antennas for NASA's Deep Space Network

NASA Technical Reports Server (NTRS)

Jamnejad, Vahraz; Huang, John; Cesarone, Robert J.

2001-01-01

In this paper we briefly discuss various options but focus on the feasibility of the phased arrays as a viable option for this application. Of particular concern and consideration will be the cost, reliability, and performance compared to the present 70-meter antenna system, particularly the gain/noise temperature levels in the receive mode. Many alternative phased arrays including planar horizontal arrays, hybrid mechanically/electronically steered arrays, phased array of mechanically steered reflectors, multi-faceted planar arrays, phased array-fed lens antennas, and planar reflect-arrays are compared and their viability is assessed. Although they have many advantages including higher reliability, near-instantaneous beam switching or steering capability, the cost of such arrays is presently prohibitive and it is concluded that the only viable array options at the present are the arrays of a few or many small reflectors. The active planar phased arrays, however, may become feasible options in the next decade and can be considered for deployment in smaller configurations as supplementary options.

Zinc oxide-based sorbents and processes for preparing and using same

DOEpatents

Gangwal, Santosh Kumar; Turk, Brian Scott; Gupta, Raghubir Prasad

2005-10-04

Zinc oxide-based sorbents, and processes for preparing and using them are provided, wherein the sorbents are preferably used to remove one or more reduced sulfur species from gas streams. The sorbents contain an active zinc component, optionally in combination with one or more promoter components and/or one or more substantially inert components. The active zinc component is a two phase material, consisting essentially of a zinc oxide (ZnO) phase and a zinc aluminate (ZnAl.sub.2 O.sub.4) phase. Each of the two phases is characterized by a relatively small crystallite size of typically less than about 500 Angstroms. Preferably the sorbents are prepared by converting a precursor mixture, containing a precipitated zinc oxide precursor and a precipitated aluminum oxide precursor, to the two-phase, active zinc oxide containing component.

Zinc-oxide-based sorbents and processes for preparing and using same

DOEpatents

Gangwal, Santosh Kumar; Turk, Brian Scott; Gupta, Raghubir Prasael

2010-03-23

Zinc oxide-based sorbents, and processes for preparing and using them are provided. The sorbents are preferably used to remove one or more reduced sulfur species from gas streams. The sorbents comprise an active zinc component, optionally in combination with one or more promoter components and/or one or more substantially inert components. The active zinc component is a two phase material, consisting essentially of a zinc oxide (ZnO) phase and a zinc aluminate (ZnAl.sub.2O.sub.4) phase. Each of the two phases is characterized by a relatively small crystallite size of typically less than about 500 Angstroms. Preferably the sorbents are prepared by converting a precursor mixture, comprising a precipitated zinc oxide precursor and a precipitated aluminum oxide precursor, to the two-phase, active zinc oxide containing component.

Identifying Effective Design Approaches to Allocate Genotypes in Two-Phase Designs: A Case Study in Pelargonium zonale.

PubMed

Molenaar, Heike; Boehm, Robert; Piepho, Hans-Peter

2017-01-01

Robust phenotypic data allow adequate statistical analysis and are crucial for any breeding purpose. Such data is obtained from experiments laid out to best control local variation. Additionally, experiments frequently involve two phases, each contributing environmental sources of variation. For example, in a former experiment we conducted to evaluate production related traits in Pelargonium zonale , there were two consecutive phases, each performed in a different greenhouse. Phase one involved the propagation of the breeding strains to obtain the stem cutting count, and phase two involved the assessment of root formation. The evaluation of the former study raised questions regarding options for improving the experimental layout: (i) Is there a disadvantage to using exactly the same design in both phases? (ii) Instead of generating a separate layout for each phase, can the design be optimized across both phases, such that the mean variance of a pair-wise treatment difference (MVD) can be decreased? To answer these questions, alternative approaches were explored to generate two-phase designs either in phase-wise order (Option 1) or across phases (Option 2). In Option 1 we considered the scenarios (i) using in both phases the same experimental design and (ii) randomizing each phase separately. In Option 2, we considered the scenarios (iii) generating a single design with eight replicates and splitting these among the two phases, (iv) separating the block structure across phases by dummy coding, and (v) design generation with optimal alignment of block units in the two phases. In both options, we considered the same or different block structures in each phase. The designs were evaluated by the MVD obtained by the intra-block analysis and the joint inter-block-intra-block analysis. The smallest MVD was most frequently obtained for designs generated across phases rather than for each phase separately, in particular when both phases of the design were separated with a single pseudo-level. The joint optimization ensured that treatment concurrences were equally balanced across pairs, one of the prerequisites for an efficient design. The proposed alternative approaches can be implemented with any model-based design packages with facilities to formulate linear models for treatment and block structures.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Public transportation : better data needed to assess length of New Starts process, and options exist to expedite project development.

DOT National Transportation Integrated Search

2009-08-01

The New Starts program is an important source of new capital investment in mass transportation. To be eligible for federal funding, a project must advance through the different project development phases of the New Starts program, including alternati...

A Key to Creativity: Children Write for Children.

ERIC Educational Resources Information Center

Caulfield, Jane

1984-01-01

A program in which very able older (14- to 15-year-olds) students write for younger ones (5- to 7-year-olds) features six-phase approach that includes composition of an idea, illustrations, the manufacturing process, optional animation, preview and publishing, and presentation of the final product. (CL)

Army Sustainability Modelling Analysis and Reporting Tool Phase 1: User Manual and Results Interpretation Guide

DTIC Science & Technology

2009-11-01

force structure liability analysis tool, designed to forecast the dynamics of personnel and equipment populations over time for a particular scenario...it is intended that it will support analysis of the sustainability of planned Army force structures against a range of possible scenarios, as well as...the force options testing process. A-SMART Phase 1 has been limited to the development of personnel, major equipment and supplies/strategic lift

Chronobiology of epilepsy: diagnostic and therapeutic implications of chrono-epileptology.

PubMed

Loddenkemper, Tobias; Lockley, Steven W; Kaleyias, Joseph; Kothare, Sanjeev V

2011-04-01

The combination of chronobiology and epilepsy offers novel diagnostic and therapeutic management options. Knowledge of the interactions between circadian periodicity, entrainment, sleep patterns, and epilepsy may provide additional diagnostic options beyond sleep deprivation and extended release medication formulations. It may also provide novel insights into the physiologic, biochemical, and genetic regulation processes of epilepsy and the circadian clock, rendering new treatment options. Temporal fluctuations of seizure susceptibility based on sleep homeostasis and circadian phase in selected epilepsies may provide predictability based on mathematical models. Chrono-epileptology offers opportunities for individualized patient-oriented treatment paradigms based on chrono-pharmacology, differential medication dosing, chrono-drug delivery systems, and utilization of "zeitgebers" such as chronobiotics or light-therapy and desynchronization strategies among others.

Recovery of copper as zero-valent phase and/or copper oxide nanoparticles from wastewater by ferritization.

PubMed

Heuss-Aßbichler, Soraya; John, Melanie; Klapper, Daniel; Bläß, Ulrich W; Kochetov, Gennadii

2016-10-01

Recently the focus of interest changed from merely purification of the waste water to recover heavy metals. With the slightly modified ferritization process presented here it is possible to decrease initial Cu(2+) concentrations up to 10 g/l to values <0.3 mg/l. The recovery rates of copper of all experiments are in the rage of 99.98 to almost 100%. Copper can be precipitated as oxide or zero valent metal (almost) free of hydroxide. All precipitates are exclusively of nanoparticle size. The phase assemblage depends strongly on experimental conditions as e.g. reaction temperature, pH-value, initial concentration and ageing time and condition. Three different options were developed depending on the reaction conditions. Option 1.) copper incorporation into the ferrite structure ((Cu,Fe)Fe2O4) and/or precipitation as cuprite (Cu2O) and zero-valent copper, option 2.) copper incorporation into the ferrite structure and/or precipitation as cuprite and/or tenorite (CuO) and option 3.) copper precipitation as tenorite. Ferrite is formed by the oxidation of GR in alkaline solution without additional oxygen supply. The chemistry reaches from pure magnetite up to 45% copper ferrite component. First experiments with wastewater from electroplating industry confirm the results obtained from synthetic solutions. In all cases the volume of the precipitates is extremely low compared to typical wastewater treatment by hydroxide precipitation. Therefore, pollution and further dissipation of copper can be avoided using this simple and economic process. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermal neutron detector and gamma-ray spectrometer utilizing a single material

DOEpatents

Stowe, Ashley; Burger, Arnold; Lukosi, Eric

2017-05-02

A combined thermal neutron detector and gamma-ray spectrometer system, including: a detection medium including a lithium chalcopyrite crystal operable for detecting thermal neutrons in a semiconductor mode and gamma-rays in a scintillator mode; and a photodetector coupled to the detection medium also operable for detecting the gamma rays. Optionally, the detection medium includes a .sup.6LiInSe.sub.2 crystal. Optionally, the detection medium comprises a compound formed by the process of: melting a Group III element; adding a Group I element to the melted Group III element at a rate that allows the Group I and Group III elements to react thereby providing a single phase I-III compound; and adding a Group VI element to the single phase I-III compound and heating; wherein the Group I element includes lithium.

Identifying Effective Design Approaches to Allocate Genotypes in Two-Phase Designs: A Case Study in Pelargonium zonale

PubMed Central

Molenaar, Heike; Boehm, Robert; Piepho, Hans-Peter

2018-01-01

Robust phenotypic data allow adequate statistical analysis and are crucial for any breeding purpose. Such data is obtained from experiments laid out to best control local variation. Additionally, experiments frequently involve two phases, each contributing environmental sources of variation. For example, in a former experiment we conducted to evaluate production related traits in Pelargonium zonale, there were two consecutive phases, each performed in a different greenhouse. Phase one involved the propagation of the breeding strains to obtain the stem cutting count, and phase two involved the assessment of root formation. The evaluation of the former study raised questions regarding options for improving the experimental layout: (i) Is there a disadvantage to using exactly the same design in both phases? (ii) Instead of generating a separate layout for each phase, can the design be optimized across both phases, such that the mean variance of a pair-wise treatment difference (MVD) can be decreased? To answer these questions, alternative approaches were explored to generate two-phase designs either in phase-wise order (Option 1) or across phases (Option 2). In Option 1 we considered the scenarios (i) using in both phases the same experimental design and (ii) randomizing each phase separately. In Option 2, we considered the scenarios (iii) generating a single design with eight replicates and splitting these among the two phases, (iv) separating the block structure across phases by dummy coding, and (v) design generation with optimal alignment of block units in the two phases. In both options, we considered the same or different block structures in each phase. The designs were evaluated by the MVD obtained by the intra-block analysis and the joint inter-block–intra-block analysis. The smallest MVD was most frequently obtained for designs generated across phases rather than for each phase separately, in particular when both phases of the design were separated with a single pseudo-level. The joint optimization ensured that treatment concurrences were equally balanced across pairs, one of the prerequisites for an efficient design. The proposed alternative approaches can be implemented with any model-based design packages with facilities to formulate linear models for treatment and block structures. PMID:29354145

Food System Trade Study for a Near-Term Mars Mission

NASA Technical Reports Server (NTRS)

Levri, Julie; Luna, Bernadette (Technical Monitor)

2000-01-01

This paper evaluates several food system options for a near-term Mars mission, based on plans for the 120-day BIO-Plex test. Food systems considered in the study are based on the International Space Station (ISS) Assembly Phase and Assembly Complete food systems. The four systems considered are: 1) ISS assembly phase food system (US portion) with individual packaging without salad production; 2) ISS assembly phase food system (US portion) with individual packaging, with salad production; 3) ISS assembly phase food system (US portion) with bulk packaging, with salad production; 4) ISS assembly complete food system (US portion) with bulk packaging with salad and refrigeration/freezing. The food system options are assessed using equivalent system mass (ESM), which evaluates each option based upon the mass, volume, power, cooling and crewtime requirements that are associated with each food system option. However, since ESM is unable to elucidate the differences in psychological benefits between the food systems, a qualitative evaluation of each option is also presented.

On-chip WDM mode-division multiplexing interconnection with optional demodulation function.

PubMed

Ye, Mengyuan; Yu, Yu; Chen, Guanyu; Luo, Yuchan; Zhang, Xinliang

2015-12-14

We propose and fabricate a wavelength-division-multiplexing (WDM) compatible and multi-functional mode-division-multiplexing (MDM) integrated circuit, which can perform the mode conversion and multiplexing for the incoming multipath WDM signals, avoiding the wavelength conflict. An phase-to-intensity demodulation function can be optionally applied within the circuit while performing the mode multiplexing. For demonstration, 4 × 10 Gb/s non-return-to-zero differential phase shift keying (NRZ-DPSK) signals are successfully processed, with open and clear eye diagrams. Measured bit error ratio (BER) results show less than 1 dB receive sensitivity variation for three modes and four wavelengths with demodulation. In the case without demodulation, the average power penalties at 4 wavelengths are -1.5, -3 and -3.5 dB for TE₀-TE₀, TE₀-TE₁ and TE₀-TE₂ mode conversions, respectively. The proposed flexible scheme can be used at the interface of long-haul and on-chip communication systems.

Marbled murrelet effectiveness monitoring plan for the Northwest Forest Plan.

Treesearch

Sarah Madsen; Diane Evans; Thomas Hamer; Paul Henson; Sherri Miller; S. Kim Nelson; Daniel Roby; Martin Stapanian

1999-01-01

This report describes options for effectiveness monitoring of long-term status and trends to evaluate the success of the Northwest Forest Plan in maintaining and restoring marbled murrelet nesting habitat and populations on Federal lands. A two-phase approach is described that begins with developing reliable and repeatable processes for identifying nesting habitat and...

Planning and Conducting Needs Assessments: A Practical Guide.

ERIC Educational Resources Information Center

Witkin, Belle Ruth; Altschuld, James W.

This book describes a structure for understanding and managing the process and options for gathering and analyzing data on needs. The three-phase model that forms the basis for the structure grew from both theory and practical experience in many settings. The focus is on assessing the needs of organizations rather than individuals. It is stressed…

Linear feature extraction from radar imagery: SBIR (Small Business Innovative Research), phase 2, option 2

NASA Astrophysics Data System (ADS)

Milgram, David L.; Kahn, Philip; Conner, Gary D.; Lawton, Daryl T.

1988-12-01

The goal of this effort is to develop and demonstrate prototype processing capabilities for a knowledge-based system to automatically extract and analyze features from Synthetic Aperture Radar (SAR) imagery. This effort constitutes Phase 2 funding through the Defense Small Business Innovative Research (SBIR) Program. Previous work examined the feasibility of and technology issues involved in the development of an automated linear feature extraction system. This final report documents this examination and the technologies involved in automating this image understanding task. In particular, it reports on a major software delivery containing an image processing algorithmic base, a perceptual structures manipulation package, a preliminary hypothesis management framework and an enhanced user interface.

Holographic memories with encryption-selectable function

NASA Astrophysics Data System (ADS)

Su, Wei-Chia; Lee, Xuan-Hao

2006-03-01

Volume holographic storage has received increasing attention owing to its potential high storage capacity and access rate. In the meanwhile, encrypted holographic memory using random phase encoding technique is attractive for an optical community due to growing demand for protection of information. In this paper, encryption-selectable holographic storage algorithms in LiNbO 3 using angular multiplexing are proposed and demonstrated. Encryption-selectable holographic memory is an advance concept of security storage for content protection. It offers more flexibility to encrypt the data or not optionally during the recording processes. In our system design, the function of encryption and non-encryption storage is switched by a random phase pattern and a uniform phase pattern. Based on a 90-degree geometry, the input patterns including the encryption and non-encryption storage are stored via angular multiplexing with reference plane waves at different incident angles. Image is encrypted optionally by sliding the ground glass into one of the recording waves or removing it away in each exposure. The ground glass is a key for encryption. Besides, it is also an important key available for authorized user to decrypt the encrypted information.

Phase-shifting coronagraph

NASA Astrophysics Data System (ADS)

Hénault, François; Carlotti, Alexis; Vérinaud, Christophe

2017-09-01

With the recent commissioning of ground instruments such as SPHERE or GPI and future space observatories like WFIRST-AFTA, coronagraphy should probably become the most efficient tool for identifying and characterizing extrasolar planets in the forthcoming years. Coronagraphic instruments such as Phase mask coronagraphs (PMC) are usually based on a phase mask or plate located at the telescope focal plane, spreading the starlight outside the diameter of a Lyot stop that blocks it. In this communication is investigated the capability of a PMC to act as a phase-shifting wavefront sensor for better control of the achieved star extinction ratio in presence of the coronagraphic mask. We discuss the two main implementations of the phase-shifting process, either introducing phase-shifts in a pupil plane and sensing intensity variations in an image plane, or reciprocally. Conceptual optical designs are described in both cases. Numerical simulations allow for better understanding of the performance and limitations of both options, and optimizing their fundamental parameters. In particular, they demonstrate that the phase-shifting process is a bit more efficient when implemented into an image plane, and is compatible with the most popular phase masks currently employed, i.e. fourquadrants and vortex phase masks.

Project coalitions in healthcare construction projects and the application of real options: an exploratory survey.

PubMed

van Reedt Dortland, Maartje; Dewulf, Geert; Voordijk, Hans

2013-01-01

Exploring the impact of the type of project coalition on types of flexibility by analyzing considered and exercised flexibilities in separated and integrated project coalitions in the design and construction phase and the operations and maintenance phase of a healthcare construction project. Flexibility in healthcare construction projects is increasingly needed in order to deal with growing uncertainties. Until now, little research has been carried out on how and to what extent flexibility is incorporated in different types of project coalitions chosen by healthcare organizations. An exploratory survey was conducted among health organizations in both cure and care. Questions were asked on the position of the real estate department within the organization, the type of project coalitions chosen and the rationale behind this choice, and the extent to which flexibility in terms of a real option was considered and to what extent it had been exercised in a project coalition. Integrated project coalitions pay more attention to flexibility in advance in both the process and the product, but exercise them to a lesser extent than separated project coalitions. The economic feasibility of real options is higher in integrated project coalitions. The study shows that real options thinking is already incorporated in real estate management of healthcare organizations, although more flexibility is considered in advance of the project than is actually realized during and after construction. Built environment, construction, decision making, hospitals, planning.

Research, Development, and Field Testing of Thermochemical Recuperation for High Temperature Furnace

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurek, Harry; Kozlov, Aleksandr

Gas Technology Institute (GTI) evaluated the technical and economic feasibility of utilizing a non-catalytic ThermoChemical Recuperation System (TCRS) to recover a significant amount of energy from the waste gases of natural gas fired steel reheat furnaces. The project was related to DOE-AMO’s (formerly known as ITP) one of the technical areas of interest: Technologies to improve energy efficiency and reduce the carbon footprint of equipment currently used in energy-intensive industries such as iron and steel, and reduce by at least 30% energy consumption and carbon dioxide emission compared to the conventional technologies. ThermoChemical Recuperation (TCR) is a technique that recoversmore » sensible heat in the exhaust gas from an industrial process, furnace, engine etc., when a hydrocarbon fuel is used for combustion. TCR enables waste heat recovery by both combustion air preheat and hydrocarbon fuel (natural gas, for example) reforming into a higher calorific fuel. The reforming process uses hot flue gas components (H2O and CO2) or steam to convert the fuel into a combustible mixture of hydrogen (H2), carbon monoxide (CO), and some unreformed hydrocarbons (CnHm). Reforming of natural gas with recycled exhaust gas or steam can significantly reduce fuel consumption, CO2 emissions and cost as well as increase process thermal efficiency. The calorific content of the fuel can be increased by up to ~28% with the TCR process if the original source fuel is natural gas. In addition, the fuel is preheated during the TCR process adding sensible heat to the fuel. The Research and Development work by GTI was proposed to be carried out in three Phases (Project Objectives). • Phase I: Develop a feasibility study consisting of a benefits-derived economic evaluation of a ThermoChemical Recuperation (TCR) concept with respect to high temperature reheat furnace applications within the steel industry (and cross-cutting industries). This will establish the design parameters and potential performance of TCR. • Phase II: Conduct research and development to take the validated technology concept from Phase I to a developmental state for a Phase 3, prototype field test. • Phase III: Design, fabricate, and prototype field testing of the TCR unit close coupled to an existing high temperature reheat furnace at a steel company for evaluation under industrial conditions The project was initiated on September 30, 2008. The report of Phase I results and conclusions was issued on October 30, 2009. The findings were reviewed by the project partners and the collective recommendation was to proceed with Phase II. Upon the work-conclusion, the Phase II report was issued on March 5, 2012. The scope of work involved the physical testing of a laboratory scale Recuperative Reformer (RR) to validate predicted performances from the feasibility study in Phase I (26% fuel reduction). Although the testing was a successful validation (21% fuel reduction mode), a technical issue 5 arose, namely a Methane Reforming Rate (MRR) roll off or non-sustaining of the methane reforming rate. GTI’s preliminary conclusions were that mechanism(s) producing the methane reforming rate reduction were not entirely known or understood and the chemical kinetics that triggered the roll off mechanism and/or other mechanisms needed to be further evaluated. GTI developed a plan to uncover the reason(s) for not sustaining a satisfactory Methane Reforming Rate (MRR) of the laboratory scale recuperator reformer (RR). The extended testing program consisted primarily of four tasks based on expected outcomes at that time. The project partners reviewed the proposal and recommended the proposed work extension to proceed and suspension of Phase III pending further review of the results of this work identified as Task 2.5. Additional Temperature Threshold Testing was undertaken by GTI and simultaneously independent analysis was carried out by the University of California Davis. Upon completion of the work, the Phase II - Task 2.5 - Extended TCR Testing Report was issued on July 10, 2013. As a result of the work performed in Phase II, Task 2.5, the end conclusion was that temperature dependency has been affirmed, but with temperatures within the recuperative reformer with higher criticality than the flue gas temperature entering into the recuperative reformer. GTI’s further conclusion is that adjustments to the lab recuperative reformer design, given the three-heat exchanger-configuration, remains a valid constraint, and therefore, it would be necessary to scale up to a field experiment capacity level. Design modifications to the recuperative reformer would likely be necessary requiring re-examining space velocity (residence time), heat transfer surface area, plus other considerations, so that a target “temperature profile envelope” within the recuperative reformer would be broad enough to perform satisfactorily in the field with varying flue gas exit temperatures from the majority of the reheat furnace population. A project review meeting was held with the project partners July 17, 2013. Task 2.5 results were reviewed along with the conclusions and recommendations. GTI proposed three field experiment options for Phase III. On the basis of successful sets of Temperature Threshold Tests (TTT), measured results demonstrated that the current design can capably be scaled up and GTI recommended consideration of these three options for a Phase III field experiment. Option 1: Production furnace ~250 MMBtu/h Option 2: Production furnace ~100 - 200 MMBtu/h Option 3: Production furnace ~50 - 100 MMBtu/h The project partners’ resulting unanimous recommendation was to provisionally proceed with Phase 3 – Option 3. Subsequently, after further deliberation, review and analysis of their respective field experiment sites, the three steel industry partners determined not to continue to Phase III of the project for both technical reasons and reasons of process economics, i.e., limited applicability of TCR technology due to higher exhaust gas temperature ranges and sensitivity to natural gas prices. As of this report, the current natural gas price is lower than the $6.03 per 6 MMBtu projected to return positive NPVs for implementing TCR technology. Accordingly, the project work was terminated effective December 31, 2013.« less

Bayesian hierarchical Poisson models with a hidden Markov structure for the detection of influenza epidemic outbreaks.

PubMed

Conesa, D; Martínez-Beneito, M A; Amorós, R; López-Quílez, A

2015-04-01

Considerable effort has been devoted to the development of statistical algorithms for the automated monitoring of influenza surveillance data. In this article, we introduce a framework of models for the early detection of the onset of an influenza epidemic which is applicable to different kinds of surveillance data. In particular, the process of the observed cases is modelled via a Bayesian Hierarchical Poisson model in which the intensity parameter is a function of the incidence rate. The key point is to consider this incidence rate as a normal distribution in which both parameters (mean and variance) are modelled differently, depending on whether the system is in an epidemic or non-epidemic phase. To do so, we propose a hidden Markov model in which the transition between both phases is modelled as a function of the epidemic state of the previous week. Different options for modelling the rates are described, including the option of modelling the mean at each phase as autoregressive processes of order 0, 1 or 2. Bayesian inference is carried out to provide the probability of being in an epidemic state at any given moment. The methodology is applied to various influenza data sets. The results indicate that our methods outperform previous approaches in terms of sensitivity, specificity and timeliness. © The Author(s) 2011 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

A volatile organics concentrator for use in monitoring Space Station water quality

NASA Technical Reports Server (NTRS)

Ehntholt, Daniel J.; Bodek, Itamar; Valentine, James R.; Trabanino, Rudy; Vincze, Johanna E.; Sauer, Richard L.

1990-01-01

The process used to identify, select, and design an approach to the isolation and concentration of volatile organic compounds from a water sample prior to chemical analysis in a microgravity environment is discerned. The trade analysis leading to the recommended volatile organics concentrator (VOC) concept to be tested in a breadboard device is presented. The system covers the areas of gases, volatile separation from water, and water removal/gas chromatograph/mass spectrometer interface. Five options for potential use in the VOC and GC/MS system are identified and ranked, and also nine options are presented for separation of volatiles from the water phase. Seven options for use in the water removal/GC column and MS interface are also identified and included in the overall considerations. A final overall recommendation for breadboard VOC testing is given.

Software for Generating Strip Maps from SAR Data

NASA Technical Reports Server (NTRS)

Hensley, Scott; Michel, Thierry; Madsen, Soren; Chapin, Elaine; Rodriguez, Ernesto

2004-01-01

Jurassicprok is a computer program that generates strip-map digital elevation models and other data products from raw data acquired by an airborne synthetic-aperture radar (SAR) system. This software can process data from a variety of airborne SAR systems but is designed especially for the GeoSAR system, which is a dual-frequency (P- and X-band), single-pass interferometric SAR system for measuring elevation both at the bare ground surface and top of the vegetation canopy. Jurassicprok is a modified version of software developed previously for airborne-interferometric- SAR applications. The modifications were made to accommodate P-band interferometric processing, remove approximations that are not generally valid, and reduce processor-induced mapping errors to the centimeter level. Major additions and other improvements over the prior software include the following: a) A new, highly efficient multi-stage-modified wave-domain processing algorithm for accurately motion compensating ultra-wideband data; b) Adaptive regridding algorithms based on estimated noise and actual measured topography to reduce noise while maintaining spatial resolution; c) Exact expressions for height determination from interferogram data; d) Fully calibrated volumetric correlation data based on rigorous removal of geometric and signal-to-noise decorrelation terms; e) Strip range-Doppler image output in user-specified Doppler coordinates; f) An improved phase-unwrapping and absolute-phase-determination algorithm; g) A more flexible user interface with many additional processing options; h) Increased interferogram filtering options; and i) Ability to use disk space instead of random- access memory for some processing steps.

Glass Ceramic Waste Forms for Combined CS+LN+TM Fission Products Waste Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crum, Jarrod V.; Turo, Laura A.; Riley, Brian J.

2010-09-23

In this study, glass ceramics were explored as an alternative waste form for glass, the current baseline, to be used for immobilizing alkaline/alkaline earth + lanthanide (CS+LN) or CS+LN+transition metal (TM) fission-product waste streams generated by a uranium extraction (UREX+) aqueous separations type process. Results from past work on a glass waste form for the combined CS+LN waste streams showed that as waste loading increased, large fractions of crystalline phases precipitated upon slow cooling.[1] The crystalline phases had no noticeable impact on the waste form performance by the 7-day product consistency test (PCT). These results point towards the development ofmore » a glass ceramic waste form for treating CS+LN or CS+LN+TM combined waste streams. Three main benefits for exploring glass ceramics are: (1) Glass ceramics offer increased solubility of troublesome components in crystalline phases as compared to glass, leading to increased waste loading; (2) The crystalline network formed in the glass ceramic results in higher heat tolerance than glass; and (3) These glass ceramics are designed to be processed by the same melter technology as the current baseline glass waste form. It will only require adding controlled canister cooling for crystallization into a glass ceramic waste form. Highly annealed waste form (essentially crack free) with up to 50X lower surface area than a typical High-Level Waste (HLW) glass canister. Lower surface area translates directly into increased durability. This was the first full year of exploring glass ceramics for the Option 1 and 2 combined waste stream options. This work has shown that dramatic increases in waste loading are achievable by designing a glass ceramic waste form as an alternative to glass. Table S1 shows the upper limits for heat, waste loading (based on solubility), and the decay time needed before treatment can occur for glass and glass ceramic waste forms. The improvements are significant for both combined waste stream options in terms of waste loading and/or decay time required before treatment. For Option 1, glass ceramics show an increase in waste loading of 15 mass % and reduction in decay time of 24 years. Decay times of {approx}50 years or longer are close to the expected age of the fuel that will be reprocessed when the modified open or closed fuel cycle is expected to be put into action. Option 2 shows a 2x to 2.5x increase in waste loading with decay times of only 45 years. Note that for Option 2 glass, the required decay time before treatment is only 35 years because of the waste loading limits related to the solubility of MoO{sub 3} in glass. If glass was evaluated for similar waste loadings as those achieved in Option 2 glass ceramics, the decay time would be significantly longer than 45 years. These glass ceramics are not optimized, but already they show the potential to dramatically reduce the amount of waste generated while still utilizing the proven processing technology used for glass production.« less

Summary of Plutonium-238 Production Alternatives Analysis Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Werner; Wade E. Bickford; David B. Lord

The Team implemented a two-phase evaluation process. During the first phase, a wide variety of past and new candidate facilities and processing methods were assessed against the criteria established by DOE for this assessment. Any system or system element selected for consideration as an alternative within the project to reestablish domestic production of Pu-238 must meet the following minimum criteria: Any required source material must be readily available in the United States, without requiring the development of reprocessing technologies or investments in systems to separate material from identified sources. It must be cost, schedule, and risk competitive with existing baselinemore » technology. Any identified facilities required to support the concept must be available to the program for the entire project life cycle (notionally 35 years, unless the concept is so novel as to require a shorter duration). It must present a solution that can generate at least 1.5 Kg of Pu-238 oxide per year, for at least 35 years. It must present a low-risk, near-term solution to the National Aeronautics and Space Administration’s urgent mission need. DOE has implemented this requirement by eliminating from project consideration any alternative with key technologies at less than Technology Readiness Level 5. The Team evaluated the options meeting these criteria using a more detailed assessment of the reasonable facility variations and compared them to the preferred option, which consists of target irradiation at the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR), target fabrication and chemical separations processing at the ORNL Radiochemical Engineering Development Center, and neptunium 237 storage at the Materials and Fuels Complex at INL. This preferred option is consistent with the Records of Decision from the earlier National Environmental Policy Act (NEPA) documentation« less

School Closures in New York City: Did Students Do Better after Their High Schools Were Closed?

ERIC Educational Resources Information Center

Kemple, James J.

2016-01-01

Much has been written about the controversy surrounding performance-based school closures, but there has been no rigorous assessment of their impact on student achievement. Does the closure process harm students who are enrolled in a school while it is being phased out? Are future students better-off because a low-performing option has been…

Tracing the decision-making process of physicians with a Decision Process Matrix.

PubMed

Hausmann, Daniel; Zulian, Cristina; Battegay, Edouard; Zimmerli, Lukas

2016-10-18

Decision-making processes in a medical setting are complex, dynamic and under time pressure, often with serious consequences for a patient's condition. The principal aim of the present study was to trace and map the individual diagnostic process of real medical cases using a Decision Process Matrix [DPM]). The naturalistic decision-making process of 11 residents and a total of 55 medical cases were recorded in an emergency department, and a DPM was drawn up according to a semi-structured technique following four steps: 1) observing and recording relevant information throughout the entire diagnostic process, 2) assessing options in terms of suspected diagnoses, 3) drawing up an initial version of the DPM, and 4) verifying the DPM, while adding the confidence ratings. The DPM comprised an average of 3.2 suspected diagnoses and 7.9 information units (cues). The following three-phase pattern could be observed: option generation, option verification, and final diagnosis determination. Residents strove for the highest possible level of confidence before making the final diagnoses (in two-thirds of the medical cases with a rating of practically certain) or excluding suspected diagnoses (with practically impossible in half of the cases). The following challenges have to be addressed in the future: real-time capturing of emerging suspected diagnoses in the memory of the physician, definition of meaningful information units, and a more contemporary measurement of confidence. DPM is a useful tool for tracing real and individual diagnostic processes. The methodological approach with DPM allows further investigations into the underlying cognitive diagnostic processes on a theoretical level and improvement of individual clinical reasoning skills in practice.

Process for production of synthesis gas with reduced sulfur content

DOEpatents

Najjar, Mitri S.; Corbeels, Roger J.; Kokturk, Uygur

1989-01-01

A process for the partial oxidation of a sulfur- and silicate-containing carbonaceous fuel to produce a synthesis gas with reduced sulfur content which comprises partially oxidizing said fuel at a temperature in the range of 1800.degree.-2200.degree. F. in the presence of a temperature moderator, an oxygen-containing gas and a sulfur capture additive which comprises an iron-containing compound portion and a sodium-containing compound portion to produce a synthesis gas comprising H.sub.2 and CO with a reduced sulfur content and a molten slag which comprises (i) a sulfur-containing sodium-iron silicate phase and (ii) a sodium-iron sulfide phase. The sulfur capture additive may optionally comprise a copper-containing compound portion.

Designing Systems for Many Possible Futures. An RSC-based Method for Affordable Concept Selection (RMACS) with Multi-Era Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaffner, Michael

2014-06-01

The current downward trend in funding for U.S. defense systems seems to be on a collision course with the state of the practice in systems engineering, which typically results in the increased pace and scale of capabilities and resultantly increased cost of complex national defense systems. Recent advances in the state of the art in systems engineering methodology can be leveraged to address this growing challenge. The present work leverages advanced constructs and methods for early-phase conceptual design of complex systems, when committed costs are still low and management influence is still high. First, a literature review is presented ofmore » the topics relevant to this work, including approaches to the design of affordable systems, assumptions and methods of exploratory modeling, and enabling techniques to help mitigate the computational challenges involved. The types, purposes, and limits of early-phase, exploratory models are then elucidated. The RSC-based Method for Affordable Concept Selection (RMACS) is described, which comprises nine processes in the three main thrusts of information gathering, evaluation, and analysis. The method is then applied to a naval ship case example, described as the Next-Generation Combat Ship, with representational information outputs and discussions of affordability with respect to each process. The ninth process, Multi-Era Analysis (MERA), is introduced and explicated, including required and optional informational components, temporal and change-related considerations, required and optional activities involved, and the potential types of outputs from the process. The MERA process is then applied to a naval ship case example similar to that of the RMACS application, but with discrete change options added to enable a tradespace network. The seven activities of the MERA process are demonstrated, with the salient outputs of each given and discussed. Additional thoughts are presented on MERA and RMACS, and 8 distinct areas are identified for further research in the MERA process, along with a brief description of the directions that such research might take. It is concluded that the affordability of complex systems can be better enabled through a conceptual design method that incorporates MERA as well as metrics such as Multi-Attribute Expense, Max Expense, and Expense Stability. It is also found that affordability of changeable systems can be better enabled through the use of existing path-planning algorithms in efficient evaluation and analysis of long-term strategies. Finally, it is found that MERA enables the identification and analysis of path-dependent considerations related to designs, epochs, strategies, and change options, in many possible futures.« less

Roadwaste : Issues and Options : appendices.

DOT National Transportation Integrated Search

1998-06-01

The appendices belong to "Roadwaste : Issues and Options". : The Oregon Department of Transportation (ODOT) is conducting a study to determine roadwaste management options. Phase 1 consisted of a thorough review of regulations and standards, roadwast...

Nordic couples' decision-making processes during assisted reproduction treatments.

PubMed

Sol Olafsdottir, Helga; Wikland, Matts; Möller, Anders

2013-06-01

To study couples' perceptions of their decision-making process during the first three years of infertility treatments. This study is a part of a larger project studying the decision-making processes of 22 infertile heterosexual couples, recruited from fertility clinics in all five Nordic countries, over a three year period. A descriptive qualitative method was used. Process of decision-making during assisted reproduction treatments. Seventeen couples had succeeded in becoming parents after approximately three years. Our study suggests that the decision-making process during fertility treatments has three phases: (i) recognizing the decisions to be made, with subcategories; the driving force, mutual project, (ii) gathering knowledge and experience about the options, with subcategories; trust, patient competence, personalized support, and (iii) adapting decisions to possible options, with subcategories; strategic planning, adaption. The core category was "maintaining control in a situation of uncertainty." Two parallel processes affect couples' decision-making process, one within themselves and their relationship, and the other in their contact with the fertility clinic. Couples struggle to make decisions, trusting clinic personnel for guidance, knowledge, and understanding. Nevertheless, couples expressed disappointment with the clinics' reactions to their requests for shared decision-making. Copyright © 2013 Elsevier B.V. All rights reserved.

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE PAGES

See, Judi E.; Morris, Jason; Craft, Richard; ...

2018-01-24

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

See, Judi E.; Morris, Jason; Craft, Richard

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Challenges in shared decision making in advanced cancer care: a qualitative longitudinal observational and interview study.

PubMed

Brom, Linda; De Snoo-Trimp, Janine C; Onwuteaka-Philipsen, Bregje D; Widdershoven, Guy A M; Stiggelbout, Anne M; Pasman, H Roeline W

2017-02-01

Patients' preferences and expectations should be taken into account in treatment decision making in the last phase of life. Shared decision making (SDM) is regarded as a way to give the patient a central role in decision making. Little is known about how SDM is used in clinical practice in advanced cancer care. To examine whether and how the steps of SDM can be recognized in decision making about second- and third-line chemotherapy. Fourteen advanced cancer patients were followed over time using face-to-face in-depth interviews and observations of the patients' out-clinic visits. Interviews and outpatient clinic visits in which treatment options were discussed or decisions made were transcribed verbatim and analysed using open coding. Patients were satisfied with the decision-making process, but the steps of SDM were barely seen in daily practice. The creation of awareness about available treatment options by physicians was limited and not discussed in an equal way. Patients' wishes and concerns were not explicitly assessed, which led to different expectations about improved survival from subsequent lines of chemotherapy. To reach SDM in daily practice, physicians should create awareness of all treatment options, including forgoing treatment, and communicate the risk of benefit and harm. Open and honest communication is needed in which patients' expectations and concerns are discussed. Through this, the difficult process of decision making in the last phase of life can be facilitated and the focus on the best care for the specific patient is strengthened. © 2015 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Retirement Options to Offer College Faculty.

ERIC Educational Resources Information Center

Felicetti, Daniel A.

1982-01-01

Retirement options available to institutions are outlined, including early retirement incentives, phased retirement, facilitating consulting opportunities, travel and outplacement services, maintaining community involvement, annuities, and pensions. Suggestions are made for increasing cost-effectiveness and fitting the options to local…

Decision-Making Process Related to Participation in Phase I Clinical Trials: A Nonsystematic Review of the Existing Evidence.

PubMed

Gorini, Alessandra; Mazzocco, Ketti; Pravettoni, Gabriella

2015-01-01

Due to the lack of other treatment options, patient candidates for participation in phase I clinical trials are considered the most vulnerable, and many ethical concerns have emerged regarding the informed consent process used in the experimental design of such trials. Starting with these considerations, this nonsystematic review is aimed at analyzing the decision-making processes underlying patients' decision about whether to participate (or not) in phase I trials in order to clarify the cognitive and emotional aspects most strongly implicated in this decision. Considering that there is no uniform decision calculus and that many different variables other than the patient-physician relationship (including demographic, clinical, and personal characteristics) may influence patients' preferences for and processing of information, we conclude that patients' informed decision-making can be facilitated by creating a rigorously developed, calibrated, and validated computer tool modeled on each single patient's knowledge, values, and emotional and cognitive decisional skills. Such a tool will also help oncologists to provide tailored medical information that is useful to improve the shared decision-making process, thereby possibly increasing patient participation in clinical trials. © 2015 S. Karger AG, Basel.

Space Operations Center system analysis study extension. Volume 2: Programmatics and cost

NASA Technical Reports Server (NTRS)

1982-01-01

A summary of Space Operations Center (SOC) orbital space station costs, program options and program recommendations is presented. Program structure, hardware commonality, schedules and program phasing are considered. Program options are analyzed with respect to mission needs, design and technology options, and anticipated funding constraints. Design and system options are discussed.

Process for forming a homogeneous oxide solid phase of catalytically active material

DOEpatents

Perry, Dale L.; Russo, Richard E.; Mao, Xianglei

1995-01-01

A process is disclosed for forming a homogeneous oxide solid phase reaction product of catalytically active material comprising one or more alkali metals, one or more alkaline earth metals, and one or more Group VIII transition metals. The process comprises reacting together one or more alkali metal oxides and/or salts, one or more alkaline earth metal oxides and/or salts, one or more Group VIII transition metal oxides and/or salts, capable of forming a catalytically active reaction product, in the optional presence of an additional source of oxygen, using a laser beam to ablate from a target such metal compound reactants in the form of a vapor in a deposition chamber, resulting in the deposition, on a heated substrate in the chamber, of the desired oxide phase reaction product. The resulting product may be formed in variable, but reproducible, stoichiometric ratios. The homogeneous oxide solid phase product is useful as a catalyst, and can be produced in many physical forms, including thin films, particulate forms, coatings on catalyst support structures, and coatings on structures used in reaction apparatus in which the reaction product of the invention will serve as a catalyst.

Fractionating choice: A study on reward discrimination, preference and relative valuation in the rat (Rattus norvegicus)

PubMed Central

Ricker, Joshua M.; Hatch, Justin D.; Powers, Daniel D.; Cromwell, Howard C.

2016-01-01

Choice behavior combines discrimination between distinctive outcomes, preference for specific outcomes and relative valuation of comparable outcomes. Previous work has focused on one component (i.e., preference) disregarding other influential processes that might provide a more complete understanding. Animal models of choice have been explored primarily utilizing extensive training, limited freedom for multiple decisions and sparse behavioral measures constrained to a single phase of motivated action. The present study used a paradigm that combines different elements of previous methods with the goal to distinguish among components of choice and explore how well components match predictions based on risk-sensitive foraging strategies. In order to analyze discrimination and relative valuation, it was necessary to have an option that shifted and an option that remained constant. Shifting outcomes among weeks included a change in single-option outcome (0 to 1 to 2 pellets) or a change in mixed-option outcome (0 or 5 to 0 or 3 to 0 or 1 pellets). Constant outcomes among weeks were also mixedoption (0 or 3 pellets) or single-option (1 pellet). Shifting single-option outcomes among weeks led to better discrimination, more robust preference and significant incentive contrast effects for the alternative outcome. Shifting multi-options altered choice components and led to dissociations among discrimination, preference, and reduced contrast effects. During extinction, all components were impacted with the greatest deficits during the shifting mixed-option outcome sessions. Results suggest choice behavior can be optimized for one component but suboptimal for others depending upon the complexity of alterations in outcome value between options. PMID:27078079

A Comparative Analysis of Phase-Change Wastewater Processing Approaches for Microgravity

NASA Technical Reports Server (NTRS)

Lange, Kevin

2016-01-01

Two phase-change wastewater processing candidates, the ISS Vapor Compression Distillation (VCD) System and the Cascade Distiller System (CDS), are compared based on dynamic modeling of both technologies. Differences in fluid handling and energy recovery for the technologies are described and contrasted. Model predictions are presented showing how temperatures, pressures, and compositions vary locally within each distiller. These dynamic variations are difficult to observe experimentally and have implications regarding non-condensable buildup and salt precipitation potential. Alternative architectures involving VCD and CDS components are analyzed in terms of predicted performance and equivalent system mass (ESM). The addition of a downstream brine processor to increase water recovery is also evaluated. Options for reducing overall ESM are discussed, including the possibility of developing a single precipitation-tolerant primary wastewater processor.

Vestibular Function Research (VFR) experiment. Phase B: Design definition study

NASA Technical Reports Server (NTRS)

1978-01-01

The Vestibular Functions Research (VFR) Experiment was established to investigate the neurosensory and related physiological processes believed to be associated with the space flight nausea syndrome and to develop logical means for its prediction, prevention and treatment. The VFR Project consists of ground and spaceflight experimentation using frogs as specimens. The phase B Preliminary Design Study provided for the preliminary design of the experiment hardware, preparation of performance and hardware specification and a Phase C/D development plan, establishment of STS (Space Transportation System) interfaces and mission operations, and the study of a variety of hardware, experiment and mission options. The study consist of three major tasks: (1) mission mode trade-off; (2) conceptual design; and (3) preliminary design.

Collaborative Decision Model on Stockpile Material of a Traditional Market Infrastructure using Value-Based HBU

NASA Astrophysics Data System (ADS)

Utomo, C.; Rahmawati, Y.; Pararta, D. L.; Ariesta, A.

2017-11-01

Readiness of infrastructure establishment is needed in the early phase of real estate development. To meet the needs of retail property in the form of traditional markets, the Government prepares to build a new 1300 units. Traditional market development requires infrastructure development. One of it is the preparation of sand material embankment as much as ± 200,000 m3. With a distance of 30 km, sand material can be delivered to the project site by dump trucks that can only be operated by 2 trip per day. The material is managed by using stockpile method. Decision of stockpile location requires multi person and multi criteria in a collaborative environment. The highest and the best use (HBU) criteria was used to construct a value-based decision hierarchy. Decision makers from five stakeholders analyzed the best of three locations by giving their own preference of development cost and HBU function. Analytical Hierarchy Process (AHP) based on satisfying options and cooperative game was applied for agreement options and coalition formation on collaborative decision. The result indicates that not all solutions become a possible location for the stockpile material. It shows the ‘best fit’ options process for all decision makers.

Alternatives for the intermediate recovery of plasmid DNA: performance, economic viability and environmental impact.

PubMed

Freitas, Sindelia; Canário, Sónia; Santos, José A L; Prazeres, Duarte M F

2009-02-01

Robust cGMP manufacturing is required to produce high-quality plasmid DNA (pDNA). Three established techniques, isopropanol and ammonium sulfate (AS) precipitation (PP), tangential flow filtration (TFF) and aqueous two-phase systems (ATPS) with PEG600/AS, were tested as alternatives to recover pDNA from alkaline lysates. Yield and purity data were used to evaluate the economic and environmental impact of each option. Although pDNA yields > or = 90% were always obtained, ATPS delivered the highest HPLC purity (59%), followed by PP (48%) and TFF (18%). However, the ability of ATPS to concentrate pDNA was very poor when compared with PP or TFF. Processes were also implemented by coupling TFF with ATPS or AS-PP. Process simulations indicate that all options require large amounts of water (100-200 tons/kg pDNA) and that the ATPS process uses large amounts of mass separating agents (65 tons/kg pDNA). Estimates indicate that operating costs of the ATPS process are 2.5-fold larger when compared with the PP and TFF processes. The most significant contributions to the costs in the PP, TFF and ATPS processes came from operators (59%), consumables (75%) and raw materials (84%), respectively. The ATPS process presented the highest environmental impact, whereas the impact of the TFF process was negligible.

What types of investors generate the two-phase phenomenon?

NASA Astrophysics Data System (ADS)

Ryu, Doojin

2013-12-01

We examine the two-phase phenomenon described by Plerou, Gopikrishnan, and Stanley (2003) [1] in the KOSPI 200 options market, one of the most liquid options markets in the world. By analysing a unique intraday dataset that contains information about investor type for each trade and quote, we find that the two-phase phenomenon is generated primarily by domestic individual investors, who are generally considered to be uninformed and noisy traders. In contrast, our empirical results indicate that trades by foreign institutions, who are generally considered informed and sophisticated investors, do not exhibit two-phase behaviour.

Sensitivity analysis of the add-on price estimate for the silicon web growth process

NASA Technical Reports Server (NTRS)

Mokashi, A. R.

1981-01-01

The web growth process, a silicon-sheet technology option, developed for the flat plate solar array (FSA) project, was examined. Base case data for the technical and cost parameters for the technical and commercial readiness phase of the FSA project are projected. The process add on price, using the base case data for cost parameters such as equipment, space, direct labor, materials and utilities, and the production parameters such as growth rate and run length, using a computer program developed specifically to do the sensitivity analysis with improved price estimation are analyzed. Silicon price, sheet thickness and cell efficiency are also discussed.

A guide to transportation funding options : phase 2, final report, October 2009.

DOT National Transportation Integrated Search

2009-10-01

This project is a continuation of a project that provided a one-stop shop website, A Guide to Transportation Funding : Options (http://utcm.tamu.edu/tfo), detailing transportation funding options and their applicability in an easy-to-use : format. Th...

Transformational Solar Array Final Report

NASA Technical Reports Server (NTRS)

Gaddy, Edward; Ballarotto, Mihaela; Drabenstadt, Christian; Nichols, John; Douglas, Mark; Spence, Brian; Stall, Richard A.; Sulyma, Chris; Sharps, Paul

2017-01-01

We have made outstanding progress in the Base Phase towards achieving the final NASA Research Announcement (NRA) goals. Progress is better than anticipated due to the lighter than predicted mass of the IMM solar cells. We look forward to further improvements in the IMM cell performance during Option I and Option II; so, we have confidence that the first four items listed in the table will improve to better than the NRA goals. The computation of the end of life blanket efficiency is uncertain because we have extrapolated the radiation damage from room temperature measurements. The last three items listed in the Table were not intended to be accomplished during the Base Phase; they will be achieved during Option I and Option II.

Trinitromethyl Heterocyclic Oxidizers as a Solid Propellant Ingredient Final Report CRADA No TC02146.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pagoria, P.; Racoveanu, A.

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Physical Sciences, Inc. (PSI), to develop a synthesis of two novel energetic heterocyclic oxidizers as possible replacements for ammonium perchlorate (AP) in rocket propellant formulations. This CRADA resulted from the award of the Phase I Small Business Technology Transfer (STTR) from DOD. The CRADA consisted of two phases. The goal for Phase 1 was to produce a new oxidizer called TNMDNP. Phase 2 is optional (based on the success of Phase 1) and the goal of Phase 2more » (optional) was to produce a new oxidizer called TNMDNT. Phase 2 tasks would be performed based on the successful results of Phase 1.« less

Thermal management system options for high power space platforms

NASA Technical Reports Server (NTRS)

Sadunas, J. A.; Lehtinen, A.; Parish, R.

1985-01-01

Thermal Management System (TMS) design options for a high power (75kWe), low earth orbit, multimodule space platform were investigated. The approach taken was to establish a baseline TMS representative of current technology, and to make incremental improvements through successive subsystem trades that lead to a candidate TMS. The TMS trades included centralized and decentralized transport, single-phase and two-phase transport, alternate working fluids, liquid loop and heat pipe radiators, deployed fixed, body mounted and steerable radiators, and thermal storage. The subsystem options were evaluated against criteria such as weight, TMS power requirement, reliability, system isothermality penalty, and growth potential.

Reducing environmental risk associated with laboratory decommissioning and property transfer.

PubMed

Dufault, R; Abelquist, E; Crooks, S; Demers, D; DiBerardinis, L; Franklin, T; Horowitz, M; Petullo, C; Sturchio, G

2000-12-01

The need for more or less space is a common laboratory problem. Solutions may include renovating existing space, leaving or demolishing old space, or acquiring new space or property for building. All of these options carry potential environmental risk. Such risk can be the result of activities related to the laboratory facility or property (e.g., asbestos, underground storage tanks, lead paint), or the research associated with it (e.g., radioactive, microbiological, and chemical contamination). Regardless of the option chosen to solve the space problem, the potential environmental risk must be mitigated and the laboratory space and/or property must be decommissioned or rendered safe prior to any renovation, demolition, or property transfer activities. Not mitigating the environmental risk through a decommissioning process can incur significant financial liability for any costs associated with future decommissioning cleanup activities. Out of necessity, a functioning system, environmental due diligence auditing, has evolved over time to assess environmental risk and reduce associated financial liability. This system involves a 4-phase approach to identify, document, manage, and clean up areas of environmental concern or liability, including contamination. Environmental due diligence auditing includes a) historical site assessment, b) characterization assessment, c) remedial effort and d) final status survey. General practice standards from the American Society for Testing and Materials are available for conducting the first two phases. However, standards have not yet been developed for conducting the third and final phases of the environmental due diligence auditing process. Individuals involved in laboratory decommissioning work in the biomedical research industry consider this a key weakness.

Reducing environmental risk associated with laboratory decommissioning and property transfer.

PubMed Central

Dufault, R; Abelquist, E; Crooks, S; Demers, D; DiBerardinis, L; Franklin, T; Horowitz, M; Petullo, C; Sturchio, G

2000-01-01

The need for more or less space is a common laboratory problem. Solutions may include renovating existing space, leaving or demolishing old space, or acquiring new space or property for building. All of these options carry potential environmental risk. Such risk can be the result of activities related to the laboratory facility or property (e.g., asbestos, underground storage tanks, lead paint), or the research associated with it (e.g., radioactive, microbiological, and chemical contamination). Regardless of the option chosen to solve the space problem, the potential environmental risk must be mitigated and the laboratory space and/or property must be decommissioned or rendered safe prior to any renovation, demolition, or property transfer activities. Not mitigating the environmental risk through a decommissioning process can incur significant financial liability for any costs associated with future decommissioning cleanup activities. Out of necessity, a functioning system, environmental due diligence auditing, has evolved over time to assess environmental risk and reduce associated financial liability. This system involves a 4-phase approach to identify, document, manage, and clean up areas of environmental concern or liability, including contamination. Environmental due diligence auditing includes a) historical site assessment, b) characterization assessment, c) remedial effort and d) final status survey. General practice standards from the American Society for Testing and Materials are available for conducting the first two phases. However, standards have not yet been developed for conducting the third and final phases of the environmental due diligence auditing process. Individuals involved in laboratory decommissioning work in the biomedical research industry consider this a key weakness. PMID:11121365

High-temperature experimental and thermodynamic modelling research on the pyrometallurgical processing of copper

NASA Astrophysics Data System (ADS)

Hidayat, Taufiq; Shishin, Denis; Decterov, Sergei A.; Hayes, Peter C.; Jak, Evgueni

2017-01-01

Uncertainty in the metal price and competition between producers mean that the daily operation of a smelter needs to target high recovery of valuable elements at low operating cost. Options for the improvement of the plant operation can be examined and decision making can be informed based on accurate information from laboratory experimentation coupled with predictions using advanced thermodynamic models. Integrated high-temperature experimental and thermodynamic modelling research on phase equilibria and thermodynamics of copper-containing systems have been undertaken at the Pyrometallurgy Innovation Centre (PYROSEARCH). The experimental phase equilibria studies involve high-temperature equilibration, rapid quenching and direct measurement of phase compositions using electron probe X-ray microanalysis (EPMA). The thermodynamic modelling deals with the development of accurate thermodynamic database built through critical evaluation of experimental data, selection of solution models, and optimization of models parameters. The database covers the Al-Ca-Cu-Fe-Mg-O-S-Si chemical system. The gas, slag, matte, liquid and solid metal phases, spinel solid solution as well as numerous solid oxide and sulphide phases are included. The database works within the FactSage software environment. Examples of phase equilibria data and thermodynamic models of selected systems, as well as possible implementation of the research outcomes to selected copper making processes are presented.

Decision-making process related to treatment and management in Korean women with breast cancer: Finding the right individualized healthcare trajectory.

PubMed

Kim, Kkotbong; Yang, Jinhyang

2017-06-01

After being diagnosed with breast cancer, women must make a number of decisions about their treatment and management. When the decision-making process among breast cancer patients is ineffective, it results in harm to their health. Little is known about the decision-making process of breast cancer patients during the entire course of treatment and management. We investigated women with breast cancer to explore the decision-making processes related to treatment and management. Eleven women participated, all of whom were receiving treatment or management in Korea. The average participant age was 43.5years. For data collection and analysis, a grounded theory methodology was used. Through constant comparative analyses, a core category emerged that we referred to as "finding the right individualized healthcare trajectory." The decision-making process occurred in four phases: turmoil, exploration, balance, and control. The turmoil phase included weighing the credibility of information and lowering the anxiety level. The exploration phase included assessing the expertise/promptness of medical treatment and evaluating the effectiveness of follow-up management. The balance phase included performing analyses from multiple angles and rediscovering value as a human being. The control phase included constructing an individualized management system and following prescribed and other management options. It is important to provide patients with accurate information related to the treatment and management of breast cancer so that they can make effective decisions. Healthcare providers should engage with patients on issues related to their disease, understand the burden placed on patients because of issues related to their sex, and ensure that the patient has a sufficient support system. The results of this study can be used to develop phase-specific, patient-centered, and tailored interventions for breast cancer patients. Copyright © 2017 Elsevier Inc. All rights reserved.

Gas purification in the dense phase at the CATS terminal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Openshaw, P.J.; Carnell, P.J.H.; Rhodes, E.F.

The purification and transportation of natural gas at very high pressures can help to minimize the capital cost of pipelines and processing equipment. However, complex mixtures of hydrocarbons undergo unusual phase changes, such as retrograde condensation, as the temperature and pressure are altered. The Central Area Transmission System (CATS) is a joint venture of Amoci, BG, Amerada Hess, Phillips, Agip and Fina operated by Amoco on behalf of the owners. The design of the CATS terminal has provided an interesting processing challenge. The terminal receives a total of 1.6 Bscf/d of rich gas from a number of offshore fields. Allmore » are relatively sweet but the small amounts of H{sub 2}S and Hg are removed. Fixed bed technology was selected as the most economic purification process, while minimizing hydrocarbon loss and operator involvement. Conventionally, the raw gas would be split into the different hydrocarbon fractions and each would be processed separately. This would require the installation of a large number of reactors. A more elegant solution is to treat the gas on arrival at the terminal in the dense phase. This option raised questions around whether a fixed bed would be prone to fouling, could the pressure drop be kept low enough to avoid phase separation and would inadvertent wetting by condensation cause problems. Details are given of the test work carried out to prove the viability of using fixed bed technology for dense phase gas processing, the eventual design adopted and the performance over the first year of service.« less

Investigation of Alternative Return Strategies for Orion Trans-earth Injection Design Options

NASA Technical Reports Server (NTRS)

Marchand, Belinda G.; Scarritt, Sara K.; Howell, Kathleen C.; Weeks, Michael W.

2010-01-01

The purpose of this study is to investigate alternative return strategies for the Orion trans-Earth injection (TEI) phase. A dynamical systems analysis approach considers the structure of the stable and unstable Sun perturbed Earth-Moon manifolds near the Earth-Moon interface region. A hybrid approach, then, combines the results from this analysis with classical two-body methods in a targeting process that seeks to expand the window of return opportunities in a precision entry scenario. The resulting startup arcs can be used, for instance, to enhance the block set of solutions available onboard during an autonomous targeting process.

Planetary entry, descent, and landing technologies

NASA Astrophysics Data System (ADS)

Pichkhadze, K.; Vorontsov, V.; Polyakov, A.; Ivankov, A.; Taalas, P.; Pellinen, R.; Harri, A.-M.; Linkin, V.

2003-04-01

Martian meteorological lander (MML) is intended for landing on the Martian surface in order to monitor the atmosphere at landing point for one Martian year. MMLs shall become the basic elements of a global network of meteorological mini-landers, observing the dynamics of changes of the atmospheric parameters on the Red Planet. The MML main scientific tasks are as follows: (1) Study of vertical structure of the Martian atmosphere throughout the MML descent; (2) On-surface meteorological observations for one Martian year. One of the essential factors influencing the lander's design is its entry, descent, and landing (EDL) sequence. During Phase A of the MML development, five different options for the lander's design were carefully analyzed. All of these options ensure the accomplishment of the above-mentioned scientific tasks with high effectiveness. CONCEPT A (conventional approach): Two lander options (with a parachute system + airbag and an inflatable airbrake + airbag) were analyzed. They are similar in terms of fulfilling braking phases and completely analogous in landing by means of airbags. CONCEPT B (innovative approach): Three lander options were analyzed. The distinguishing feature is the presence of inflatable braking units (IBU) in their configurations. SELECTED OPTION (innovative approach): Incorporating a unique design approach and modern technologies, the selected option of the lander represents a combination of the options analyzed in the framework of Concept B study. Currently, the selected lander option undergoes systems testing (Phase D1). Several MMLs can be delivered to Mars in frameworks of various missions as primary or piggybacking payload: (1) USA-led "Mars Scout" (2007); (2) France-led "NetLander" (2007/2009); (3) Russia-led "Mars-Deimos-Phobos sample return" (2007); (4) Independent mission (currently under preliminary study); etc.

Rational decision-making about treatment and care in dementia: a contradiction in terms?

PubMed

Wolfs, Claire A G; de Vugt, Marjolein E; Verkaaik, Mike; Haufe, Marc; Verkade, Paul-Jeroen; Verhey, Frans R J; Stevens, Fred

2012-04-01

To gain caregivers' insights into the decision-making process in dementia patients with regard to treatment and care. Four focus group interviews (n=29). The decision-making process consists of three elementary components: (1) identifying an individual's needs; (2) exploring options; and (3) making a choice. The most important phase is the exploration phase as it is crucial for the acceptance of the disease. Furthermore, the decision is experienced more as an emotional choice than a rational one. It is influenced by personal preferences whereas practical aspects do not seem to play a substantial role. Several aspects make decision-making in dementia different from decision-making in the context of other chronic diseases: (1) the difficulty accepting dementia; (2) the progressive nature of dementia; (3) patient's reliance on surrogate decision-making; and (4) strong emotions. Due to these aspects, the decision-making process is very time-consuming, especially the crucial exploration phase. A more active role is required of both the caregiver and the health care professional especially in the exploration phase, enabling easier acceptance and adjustment to the disease. Acceptance is an important condition for reducing anxiety and resistance to care that may offer significant benefits in the future. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

CAD/CAM data management needs, requirements and options

NASA Technical Reports Server (NTRS)

Lopatka, R. S.; Johnson, T. G.

1978-01-01

The requirements for a data management system in support of technical or scientific applications and possible courses of action were reviewed. Specific requirements were evolved while working towards higher level integration impacting all phases of the current design process and through examination of commercially marketed systems and related data base research. Arguments are proposed for varied approaches in implementing data base systems ranging from no action necessary to immediate procurement of an existing data base management system.

Design of Training Systems (DOTS) Project: Test and Evaluation of Phase II Models

DTIC Science & Technology

1976-04-01

when the process being modeled is very much dependent upon human resoarces, precise requirement formulas are usually V unavailable. In this...mixed integer formulation options. The SGRR, in a sense, is an automiation of what is cu~rrently beinig donec men~tall y by instructors and trai ninrg nv...test and evaluation (T&E); information concerning CNETS LCDR R. J. Biersner Human Factors Analysis, N-214 AV 922-1392 CNTECHTRA CDR J. D. Davis

Pathogenesis and treatment of impaired wound healing in diabetes mellitus: new insights.

PubMed

Baltzis, Dimitrios; Eleftheriadou, Ioanna; Veves, Aristidis

2014-08-01

Diabetic foot ulcers (DFUs) are one of the most common and serious complications of diabetes mellitus, as wound healing is impaired in the diabetic foot. Wound healing is a dynamic and complex biological process that can be divided into four partly overlapping phases: hemostasis, inflammation, proliferative and remodeling. These phases involve a large number of cell types, extracellular components, growth factors and cytokines. Diabetes mellitus causes impaired wound healing by affecting one or more biological mechanisms of these processes. Most often, it is triggered by hyperglycemia, chronic inflammation, micro- and macro-circulatory dysfunction, hypoxia, autonomic and sensory neuropathy, and impaired neuropeptide signaling. Research focused on thoroughly understanding these mechanisms would allow for specifically targeted treatment of diabetic foot ulcers. The main principles for DFU treatment are wound debridement, pressure off-loading, revascularization and infection management. New treatment options such as bioengineered skin substitutes, extracellular matrix proteins, growth factors, and negative pressure wound therapy, have emerged as adjunctive therapies for ulcers. Future treatment strategies include stem cell-based therapies, delivery of gene encoding growth factors, application of angiotensin receptors analogs and neuropeptides like substance P, as well as inhibition of inflammatory cytokines. This review provides an outlook of the pathophysiology in diabetic wound healing and summarizes the established and adjunctive treatment strategies, as well as the future therapeutic options for the treatment of DFUs.

Roadwaste : issues and options.

DOT National Transportation Integrated Search

1998-06-01

The Oregon Department of Transportation (ODOT) is conducting a study to determine roadwaste management options. Phase 1 consisted of a thorough review of regulations and standards, roadwaste characterization, current management practices, and new tec...

Long-term behavioral sensitization to apomorphine is independent of conditioning and increases conditioned pecking, but not preference, in pigeons.

PubMed

Anselme, Patrick; Edeş, Neslihan; Tabrik, Sepideh; Güntürkün, Onur

2018-01-15

When rodents are given a free choice between a variable option and a constant option, they may prefer variability. This preference is even sometimes increased following repeated administration of a dopamine agonist. The present study was the first to examine preference for variability under the systemic administration of a dopamine agonist, apomorphine (Apo), in birds. Experiment 1 tested the drug-free preference and the propensity to choose of pigeons for a constant over a variable delay. It appeared that they preferred and decided more quickly to peck at the optimal delay option. Experiment 2 assessed the effects of a repeated injection of Apo on delay preference, in comparison with previous control tests within the same individuals. Apo treatment might have decreased the number of pecks at the constant option across the different experimental phases, but failed to induce a preference for the variable option. In Experiment 3, two groups of pigeons (Apo-sensitized and saline) were used in order to avoid inhomogeneity in treatments. They had to choose between a 50% probability option and a 5-s delay option. Conditioned pecking and the propensity to choose were higher in the Apo-sensitized pigeons, but, in each group, the pigeons showed indifference between the two options. This experiment also showed that long-term behavioral sensitization to Apo can occur independently of a conditioning process. These results suggest that Apo sensitization can enhance the attractiveness of conditioned cues, while having no effect on the development of a preference for variable-delay and probabilistic schedules of reinforcement. Copyright © 2017 Elsevier B.V. All rights reserved.

Site Development, Operations, and Closure Plan Topical Report 5 An Assessment of Geologic Carbon Sequestration Options in the Illinois Basin. Phase III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finley, Robert; Payne, William; Kirksey, Jim

2015-06-01

The Midwest Geological Sequestration Consortium (MGSC) has partnered with Archer Daniels Midland Company (ADM) and Schlumberger Carbon Services to conduct a large-volume, saline reservoir storage project at ADM’s agricultural products processing complex in Decatur, Illinois. The Development Phase project, named the Illinois Basin Decatur Project (IBDP) involves the injection of 1 million tonnes of carbon dioxide (CO 2) into a deep saline formation of the Illinois Basin over a three-year period. This report focuses on objectives, execution, and lessons learned/unanticipated results from the site development (relating specifically to surface equipment), operations, and the site closure plan.

Ultramicrowave communications system, phase 2

NASA Technical Reports Server (NTRS)

1980-01-01

Communications system design was completed and reviewed. Minor changes were made in order to make it more cost effective and to increase design flexibility. System design activities identified the techniques and procedures to generate and monitor high data rate test signals. Differential bi-phase demodulation is the proposed method for this system. The mockup and packaging designs were performed, and component layout and interconnection constraints were determined, as well as design drawings for dummy parts of the system. The possibility of adding a low cost option to the transceiver system was studied. The communications program has the advantage that new technology signal processing devices can be readily interfaced with the existing radio frequency subsystem to produce a short range radar.

Microbial advanced biofuels production: overcoming emulsification challenges for large-scale operation.

PubMed

Heeres, Arjan S; Picone, Carolina S F; van der Wielen, Luuk A M; Cunha, Rosiane L; Cuellar, Maria C

2014-04-01

Isoprenoids and alkanes produced and secreted by microorganisms are emerging as an alternative biofuel for diesel and jet fuel replacements. In a similar way as for other bioprocesses comprising an organic liquid phase, the presence of microorganisms, medium composition, and process conditions may result in emulsion formation during fermentation, hindering product recovery. At the same time, a low-cost production process overcoming this challenge is required to make these advanced biofuels a feasible alternative. We review the main mechanisms and causes of emulsion formation during fermentation, because a better understanding on the microscale can give insights into how to improve large-scale processes and the process technology options that can address these challenges. Copyright © 2014 Elsevier Ltd. All rights reserved.

Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production.

PubMed

Ott, Denise; Kralisch, Dana; Denčić, Ivana; Hessel, Volker; Laribi, Yosra; Perrichon, Philippe D; Berguerand, Charline; Kiwi-Minsker, Lioubov; Loeb, Patrick

2014-12-01

As the demand for new drugs is rising, the pharmaceutical industry faces the quest of shortening development time, and thus, reducing the time to market. Environmental aspects typically still play a minor role within the early phase of process development. Nevertheless, it is highly promising to rethink, redesign, and optimize process strategies as early as possible in active pharmaceutical ingredient (API) process development, rather than later at the stage of already established processes. The study presented herein deals with a holistic life-cycle-based process optimization and intensification of a pharmaceutical production process targeting a low-volume, high-value API. Striving for process intensification by transfer from batch to continuous processing, as well as an alternative catalytic system, different process options are evaluated with regard to their environmental impact to identify bottlenecks and improvement potentials for further process development activities. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Pilot-Scale Demonstration of a Novel, Low-Cost Oxygen Supply Process and its Integration with Oxy-Fuel Coal-Fired Boilers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krish Krishnamurthy; Divy Acharya; Frank Fitch

In order to achieve DOE targets for carbon dioxide capture, it is crucial not only to develop process options that will generate and provide oxygen to the power cycle in a cost-effective manner compared to the conventional oxygen supply methods based on cryogenic air separation technology, but also to identify effective integration options for these new technologies into the power cycle with carbon dioxide capture. The Linde/BOC developed Ceramic Autothermal Recovery (CAR) process remains an interesting candidate to address both of these issues by the transfer of oxygen from the air to a recycled CO{sub 2} rich flue-gas stream inmore » a cyclic process utilizing the high temperature sorption properties of perovskites. Good progress was made on this technology in this project, but significant challenges remain to be addressed before CAR oxygen production technology is ready for commercial exploitation. Phase 1 of the project was completed by the end of September 2008. The two-bed 0.7 tons/day O2 CAR process development unit (PDU) was installed adjacent to WRI's pilot scale coal combustion test facility (CTF). Start-up and operating sequences for the PDU were developed and cyclic operation of the CAR process demonstrated. Controlled low concentration methane addition allowed the beds to be heated up to operational temperature (800-900 C) and then held there during cyclic operation of the 2-bed CAR process, in this way overcoming unavoidable heat losses from the beds during steady state operation. The performance of the PDU was optimized as much as possible, but equipment limitations prevented the system from fully achieving its target performance. Design of the flue gas recirculation system to integrate CAR PDU with the CTF and the system was completed and integrated tests successfully performed at the end of the period. A detailed techno-economic analysis was made of the CAR process for supplying the oxygen in oxy-fuel combustion retrofit option using AEP's 450 MW Conesville, Ohio plant and contrasted with the cryogenic air separation option (ASU). Design of a large scale CAR unit was completed to support this techno-economic assessment. Based on the finding that the overall cost potential of the CAR technology compared to cryogenic ASU is nominal at current performance levels and that the risks related to both material and process scale up are still significant, the team recommended not to proceed to Phase 2. CAR process economics continue to look attractive if the original and still 'realistic' target oxygen capacities could be realized in practice. In order to achieve this end, a new fundamental materials development program would be needed. With the effective oxygen capacities of the current CAR materials there is, however, insufficient economic incentive to use this commercially unproven technology in oxy-fuel power plant applications in place of conventional ASUs. In addition, it is now clear that before a larger scale pilot demonstration of the CAR technology is made, a better understanding of the impact of flue-gas impurities on the CAR materials and of thermal transients in the beds is required.« less

Excellence at Work. Policy Option Papers for the National Governors' Association.

ERIC Educational Resources Information Center

Ganzglass, Evelyn, Ed.

This volume contains an introduction and four policy option papers that explore key issues affecting the economy and state options to address the issues within the context of the U.S. workplace. "Introduction" (David Bedford, Evelyn Ganzglass) discusses the issues identified in the first phase of the governors' initiative on Excellence at Work and…

New Therapies Offer Valuable Options for Patients with Melanoma

Cancer.gov

Two phase III clinical trials of new therapies for patients with metastatic melanoma presented in June at the 2011 ASCO conference confirmed that vemurafenib and ipilimumab (Yervoy™) offer valuable new options for the disease.

Production of Hydrogen by Superadiabatic Decomposition of Hydrogen Sulfide - Final Technical Report for the Period June 1, 1999 - September 30, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rachid B. Slimane; Francis S. Lau; Javad Abbasian

2000-10-01

The objective of this program is to develop an economical process for hydrogen production, with no additional carbon dioxide emission, through the thermal decomposition of hydrogen sulfide (H{sub 2}S) in H{sub 2}S-rich waste streams to high-purity hydrogen and elemental sulfur. The novel feature of the process being developed is the superadiabatic combustion (SAC) of part of the H{sub 2}S in the waste stream to provide the thermal energy required for the decomposition reaction such that no additional energy is required. The program is divided into two phases. In Phase 1, detailed thermochemical and kinetic modeling of the SAC reactor withmore » H{sub 2}S-rich fuel gas and air/enriched air feeds is undertaken to evaluate the effects of operating conditions on exit gas products and conversion efficiency, and to identify key process parameters. Preliminary modeling results are used as a basis to conduct a thorough evaluation of SAC process design options, including reactor configuration, operating conditions, and productivity-product separation schemes, with respect to potential product yields, thermal efficiency, capital and operating costs, and reliability, ultimately leading to the preparation of a design package and cost estimate for a bench-scale reactor testing system to be assembled and tested in Phase 2 of the program. A detailed parametric testing plan was also developed for process design optimization and model verification in Phase 2. During Phase 2 of this program, IGT, UIC, and industry advisors UOP and BP Amoco will validate the SAC concept through construction of the bench-scale unit and parametric testing. The computer model developed in Phase 1 will be updated with the experimental data and used in future scale-up efforts. The process design will be refined and the cost estimate updated. Market survey and assessment will continue so that a commercial demonstration project can be identified.« less

Development of a Hydrogasification Process for Co-Production of Substitute Natural Gas (SNG) and Electric Power from Western Coals-Phase I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond Hobbs

2007-05-31

The Advanced Hydrogasification Process (AHP)--conversion of coal to methane--is being developed through NETL with a DOE Grant and has successfully completed its first phase of development. The results so far are encouraging and have led to commitment by DOE/NETL to begin a second phase--bench scale reactor vessel testing, expanded engineering analysis and economic perspective review. During the next decade new means of generating electricity, and other forms of energy, will be introduced. The members of the AHP Team envision a need for expanded sources of natural gas or substitutes for natural gas, to fuel power generating plants. The initial workmore » the team has completed on a process to use hydrogen to convert coal to methane (pipeline ready gas) shows promising potential. The Team has intentionally slanted its efforts toward the needs of US electric utilities, particularly on fuels that can be used near urban centers where the greatest need for new electric generation is found. The process, as it has evolved, would produce methane from coal by adding hydrogen. The process appears to be efficient using western coals for conversion to a highly sought after fuel with significantly reduced CO{sub 2} emissions. Utilities have a natural interest in the preservation of their industry, which will require a dramatic reduction in stack emissions and an increase in sustainable technologies. Utilities tend to rank long-term stable supplies of fuel higher than most industries and are willing to trade some ratio of cost for stability. The need for sustainability, stability and environmentally compatible production are key drivers in the formation and progression of the AHP development. In Phase II, the team will add a focus on water conservation to determine how the basic gasification process can be best integrated with all the plant components to minimize water consumption during SNG production. The process allows for several CO{sub 2} reduction options including consumption of the CO{sub 2} in the original process as converted to methane. The process could under another option avoid emissions following the conversion to SNG through an adjunct algae conversion process. The algae would then be converted to fuels or other products. An additional application of the algae process at the end use natural gas fired plant could further reduce emissions. The APS team fully recognizes the competition facing the process from natural gas and imported liquid natural gas. While we expect those resources to set the price for methane in the near-term, the team's work to date indicates that the AHP process can be commercially competitive, with the added benefit of assuring long-term energy supplies from North American resources. Conversion of coal to a more readily transportable fuel that can be employed near load centers with an overall reduction of greenhouses gases is edging closer to reality.« less

Technical draft study report for TOPEX satellite options study, volume 1

NASA Technical Reports Server (NTRS)

1981-01-01

The use of two spacecraft for adaptation to the TOPEX mission, namely the P80-1 and the GPS phase 2 are considered. The mission involved three mission options, each option varying in payload definition, payload weight, orbital altitude and payload power requirements. The P80-1 spacecraft is an Air Force Space Test Program satellite which carries a number of payloads to an orbital altitude of 400 n.mi. at a minimum inclination of 72.5 deg, and which has an orbital life capability of three years. The GPS phase 2 spacecraft is the operational satellite for the Global Positioning NAVSTAR navigation constellation provided for all service (and commercial) use.

Option generation in decision making: ideation beyond memory retrieval

PubMed Central

Del Missier, Fabio; Visentini, Mimì; Mäntylä, Timo

2015-01-01

According to prescriptive decision theories, the generation of options for choice is a central aspect of decision making. A too narrow representation of the problem may indeed limit the opportunity to evaluate promising options. However, despite the theoretical and applied significance of this topic, the cognitive processes underlying option generation are still unclear. In particular, while a cued recall account of option generation emphasizes the role of memory and executive control, other theoretical proposals stress the importance of ideation processes based on various search and thinking processes. Unfortunately, relevant behavioral evidence on the cognitive processes underlying option generation is scattered and inconclusive. In order to reach a better understanding, we carried out an individual-differences study employing a wide array of cognitive predictors, including measures of episodic memory, semantic memory, cognitive control, and ideation fluency. The criterion tasks consisted of three different poorly-structured decision-making scenarios, and the participants were asked to generate options to solve these problems. The main criterion variable of the study was the number of valid options generated, but also the diversity and the quality of generated options were examined. The results showed that option generation fluency and diversity in the context of ill-structured decision making are supported by ideation ability even after taking into account the effects of individual differences in several other aspects of cognitive functioning. Thus, ideation processes, possibly supported by search and thinking processes, seem to contribute to option generation beyond basic associative memory retrieval. The findings of the study also indicate that generating more options may have multifaceted consequences for choice, increasing the quality of the best option generated but decreasing the mean quality of the options in the generated set. PMID:25657628

Option generation in decision making: ideation beyond memory retrieval.

PubMed

Del Missier, Fabio; Visentini, Mimì; Mäntylä, Timo

2014-01-01

According to prescriptive decision theories, the generation of options for choice is a central aspect of decision making. A too narrow representation of the problem may indeed limit the opportunity to evaluate promising options. However, despite the theoretical and applied significance of this topic, the cognitive processes underlying option generation are still unclear. In particular, while a cued recall account of option generation emphasizes the role of memory and executive control, other theoretical proposals stress the importance of ideation processes based on various search and thinking processes. Unfortunately, relevant behavioral evidence on the cognitive processes underlying option generation is scattered and inconclusive. In order to reach a better understanding, we carried out an individual-differences study employing a wide array of cognitive predictors, including measures of episodic memory, semantic memory, cognitive control, and ideation fluency. The criterion tasks consisted of three different poorly-structured decision-making scenarios, and the participants were asked to generate options to solve these problems. The main criterion variable of the study was the number of valid options generated, but also the diversity and the quality of generated options were examined. The results showed that option generation fluency and diversity in the context of ill-structured decision making are supported by ideation ability even after taking into account the effects of individual differences in several other aspects of cognitive functioning. Thus, ideation processes, possibly supported by search and thinking processes, seem to contribute to option generation beyond basic associative memory retrieval. The findings of the study also indicate that generating more options may have multifaceted consequences for choice, increasing the quality of the best option generated but decreasing the mean quality of the options in the generated set.

Integration of coastal inundation modeling from storm tides to individual waves

NASA Astrophysics Data System (ADS)

Li, Ning; Roeber, Volker; Yamazaki, Yoshiki; Heitmann, Troy W.; Bai, Yefei; Cheung, Kwok Fai

2014-11-01

Modeling of storm-induced coastal inundation has primarily focused on the surge generated by atmospheric pressure and surface winds with phase-averaged effects of the waves as setup. Through an interoperable model package, we investigate the role of phase-resolving wave processes in simulation of coastal flood hazards. A spectral ocean wave model describes generation and propagation of storm waves from deep to intermediate water, while a non-hydrostatic storm-tide model has the option to couple with a spectral coastal wave model for computation of phase-averaged processes in a near-shore region. The ocean wave and storm-tide models can alternatively provide the wave spectrum and the surface elevation as the boundary and initial conditions for a nested Boussinesq model. Additional surface-gradient terms in the Boussinesq equations maintain the quasi-steady, non-uniform storm tide for modeling of phase-resolving surf and swash-zone processes as well as combined tide, surge, and wave inundation. The two nesting schemes are demonstrated through a case study of Hurricane Iniki, which made landfall on the Hawaiian Island of Kauai in 1992. With input from a parametric hurricane model and global reanalysis and tidal datasets, the two approaches produce comparable significant wave heights and phase-averaged surface elevations in the surf zone. The nesting of the Boussinesq model provides a seamless approach to augment the inundation due to the individual waves in matching the recorded debris line along the coast.

Managing Zirconium Chemistry and Phase Compatibility in Combined Process Separations for Minor Actinide Partitioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wall, Nathalie; Nash, Ken; Martin, Leigh

In response to the NEUP Program Supporting Fuel Cycle R&D Separations and Waste Forms call DEFOA- 0000799, this report describes the results of an R&D project focusing on streamlining separation processes for advanced fuel cycles. An example of such a process relevant to the U.S. DOE FCR&D program would be one combining the functions of the TRUEX process for partitioning of lanthanides and minor actinides from PUREX(UREX) raffinates with that of the TALSPEAK process for separating transplutonium actinides from fission product lanthanides. A fully-developed PUREX(UREX)/TRUEX/TALSPEAK suite would generate actinides as product(s) for reuse (or transmutation) and fission products as waste.more » As standalone, consecutive unit-operations, TRUEX and TALSPEAK employ different extractant solutions (solvating (CMPO, octyl(phenyl)-N,Ndiisobutylcarbamoylmethylphosphine oxide) vs. cation exchanging (HDEHP, di-2(ethyl)hexylphosphoric acid) extractants), and distinct aqueous phases (2-4 M HNO 3 vs. concentrated pH 3.5 carboxylic acid buffers containing actinide selective chelating agents). The separate processes may also operate with different phase transfer kinetic constraints. Experience teaches (and it has been demonstrated at the lab scale) that, with proper control, multiple process separation systems can operate successfully. However, it is also recognized that considerable economies of scale could be achieved if multiple operations could be merged into a single process based on a combined extractant solvent. The task of accountability of nuclear materials through the process(es) also becomes more robust with fewer steps, providing that the processes can be accurately modeled. Work is underway in the U.S. and Europe on developing several new options for combined processes (TRUSPEAK, ALSEP, SANEX, GANEX, ExAm are examples). There are unique challenges associated with the operation of such processes, some relating to organic phase chemistry, others arising from the variable composition of the aqueous medium. This project targets in particular two problematic issues in designing combined process systems: managing the chemistry of challenging aqueous species (like Zr 4+) and optimizing the composition and properties of combined extractant organic phases.« less

Tactical Intelligence Applications Experimentation (TIAX) Report. Intelligence Preparation of the Battlefield (IPB)-An Automated Approach to Terrain and Mobility Corridor Analysis

DTIC Science & Technology

1978-10-20

Preparation of the Battlefield (IPB) - Phase A An Automated Approach to Terrain and Mobility Cocridor Analysis Prepared For The ;*ttlefield Systems... the Battlefield (IPB) - Phase A An Automated Approach to Terrain and Mobility Corridcr Analysis, Prepared For The Battlefield Systems Integration... series of snapshots developed for Option A. The situation snapshots would be deteloped in like manner for each option, and stored in an

Identification of atypical flight patterns

NASA Technical Reports Server (NTRS)

Statler, Irving C. (Inventor); Ferryman, Thomas A. (Inventor); Amidan, Brett G. (Inventor); Whitney, Paul D. (Inventor); White, Amanda M. (Inventor); Willse, Alan R. (Inventor); Cooley, Scott K. (Inventor); Jay, Joseph Griffith (Inventor); Lawrence, Robert E. (Inventor); Mosbrucker, Chris (Inventor)

2005-01-01

Method and system for analyzing aircraft data, including multiple selected flight parameters for a selected phase of a selected flight, and for determining when the selected phase of the selected flight is atypical, when compared with corresponding data for the same phase for other similar flights. A flight signature is computed using continuous-valued and discrete-valued flight parameters for the selected flight parameters and is optionally compared with a statistical distribution of other observed flight signatures, yielding atypicality scores for the same phase for other similar flights. A cluster analysis is optionally applied to the flight signatures to define an optimal collection of clusters. A level of atypicality for a selected flight is estimated, based upon an index associated with the cluster analysis.

Nonequilibrium transition induced by mass media in a model for social influence

NASA Astrophysics Data System (ADS)

González-Avella, J. C.; Cosenza, M. G.; Tucci, K.

2005-12-01

We study the effect of mass media, modeled as an applied external field, on a social system based on Axelrod’s model for the dissemination of culture. The numerical simulations show that the system undergoes a nonequilibrium phase transition between an ordered phase (homogeneous culture) specified by the mass media and a disordered (culturally fragmented) one. The critical boundary separating these phases is calculated on the parameter space of the system, given by the intensity of the mass media influence and the number of options per cultural attribute. Counterintuitively, mass media can induce cultural diversity when its intensity is above some threshold value. The nature of the phase transition changes from continuous to discontinuous at some critical value of the number of options.

Does implied volatility of currency futures option imply volatility of exchange rates?

NASA Astrophysics Data System (ADS)

Wang, Alan T.

2007-02-01

By investigating currency futures options, this paper provides an alternative economic implication for the result reported by Stein [Overreactions in the options market, Journal of Finance 44 (1989) 1011-1023] that long-maturity options tend to overreact to changes in the implied volatility of short-maturity options. When a GARCH process is assumed for exchange rates, a continuous-time relationship is developed. We provide evidence that implied volatilities may not be the simple average of future expected volatilities. By comparing the term-structure relationship of implied volatilities with the process of the underlying exchange rates, we find that long-maturity options are more consistent with the exchange rates process. In sum, short-maturity options overreact to the dynamics of underlying assets rather than long-maturity options overreacting to short-maturity options.

An accurate European option pricing model under Fractional Stable Process based on Feynman Path Integral

NASA Astrophysics Data System (ADS)

Ma, Chao; Ma, Qinghua; Yao, Haixiang; Hou, Tiancheng

2018-03-01

In this paper, we propose to use the Fractional Stable Process (FSP) for option pricing. The FSP is one of the few candidates to directly model a number of desired empirical properties of asset price risk neutral dynamics. However, pricing the vanilla European option under FSP is difficult and problematic. In the paper, built upon the developed Feynman Path Integral inspired techniques, we present a novel computational model for option pricing, i.e. the Fractional Stable Process Path Integral (FSPPI) model under a general fractional stable distribution that tackles this problem. Numerical and empirical experiments show that the proposed pricing model provides a correction of the Black-Scholes pricing error - overpricing long term options, underpricing short term options; overpricing out-of-the-money options, underpricing in-the-money options without any additional structures such as stochastic volatility and a jump process.

Consecutive anaerobic-aerobic treatment of the organic fraction of municipal solid waste and lignocellulosic materials in laboratory-scale landfill-bioreactors.

PubMed

Pellera, Frantseska-Maria; Pasparakis, Emmanouil; Gidarakos, Evangelos

2016-10-01

The scope of this study is to evaluate the use of laboratory-scale landfill-bioreactors, operated consecutively under anaerobic and aerobic conditions, for the combined treatment of the organic fraction of municipal solid waste (OFMSW) with two different co-substrates of lignocellulosic nature, namely green waste (GW) and dried olive pomace (DOP). According to the results such a system would represent a promising option for eventual larger scale applications. Similar variation patterns among bioreactors indicate a relatively defined sequence of processes. Initially operating the systems under anaerobic conditions would allow energetic exploitation of the substrates, while the implementation of a leachate treatment system ultimately aiming at nutrient recovery, especially during the anaerobic phase, could be a profitable option for the whole system, due to the high organic load that characterizes this effluent. In order to improve the overall effectiveness of such a system, measures towards enhancing methane contents of produced biogas, such as substrate pretreatment, should be investigated. Moreover, the subsequent aerobic phase should have the goal of stabilizing the residual materials and finally obtain an end material eventually suitable for other purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Opportunities for disease state management in prostate cancer.

PubMed

Pickard, A Simon; Hung, Shih-Ying; McKoy, June M; Witt, Whitney P; Arseven, Adnan; Sharifi, Roohollah; Wu, Zhigang; Knight, Sara J; McWilliams, Norene; Schumock, Glen T; Bennett, Charles L

2005-08-01

In this paper, we examine how the management of prostate cancer lends itself to a disease state management (DSM)-based approach, and propose a framework that emphasizes the patient-provider-caregiver triad in managing the long-term implications of the condition. There is often no clearly superior approach to the management of patients with prostate cancer (eg, watchful waiting and hormonal therapy), and each option entails different trade-offs in quality of life. Ideally, the physician and patient discuss the options, issues, and patient preferences for treatment through the shared decision-making process. A family caregiver such as the spouse of the patient is often involved in the treatment decision and in the long-term management of the cancer experience. In order to develop a DSM program supporting both patient and caregiver, educational, psychosocial, and health care system support needs should be tailored to each phase of cancer treatment/management. To embrace the unique aspects of prostate cancer management, the proposed framework emphasizes communication among the patient-caregiver-provider triad, inclusion of family caregivers in the program, cancer phase-specific support, and psychosocial services as a basis for implementation and evaluation of a DSM program in prostate cancer.

MatSeis and the GNEM R&E regional seismic anaylsis tools.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chael, Eric Paul; Hart, Darren M.; Young, Christopher John

2003-08-01

To improve the nuclear event monitoring capability of the U.S., the NNSA Ground-based Nuclear Explosion Monitoring Research & Engineering (GNEM R&E) program has been developing a collection of products known as the Knowledge Base (KB). Though much of the focus for the KB has been on the development of calibration data, we have also developed numerous software tools for various purposes. The Matlab-based MatSeis package and the associated suite of regional seismic analysis tools were developed to aid in the testing and evaluation of some Knowledge Base products for which existing applications were either not available or ill-suited. This presentationmore » will provide brief overviews of MatSeis and each of the tools, emphasizing features added in the last year. MatSeis was begun in 1996 and is now a fairly mature product. It is a highly flexible seismic analysis package that provides interfaces to read data from either flatfiles or an Oracle database. All of the standard seismic analysis tasks are supported (e.g. filtering, 3 component rotation, phase picking, event location, magnitude calculation), as well as a variety of array processing algorithms (beaming, FK, coherency analysis, vespagrams). The simplicity of Matlab coding and the tremendous number of available functions make MatSeis/Matlab an ideal environment for developing new monitoring research tools (see the regional seismic analysis tools below). New MatSeis features include: addition of evid information to events in MatSeis, options to screen picks by author, input and output of origerr information, improved performance in reading flatfiles, improved speed in FK calculations, and significant improvements to Measure Tool (filtering, multiple phase display), Free Plot (filtering, phase display and alignment), Mag Tool (maximum likelihood options), and Infra Tool (improved calculation speed, display of an F statistic stream). Work on the regional seismic analysis tools (CodaMag, EventID, PhaseMatch, and Dendro) began in 1999 and the tools vary in their level of maturity. All rely on MatSeis to provide necessary data (waveforms, arrivals, origins, and travel time curves). CodaMag Tool implements magnitude calculation by scaling to fit the envelope shape of the coda for a selected phase type (Mayeda, 1993; Mayeda and Walter, 1996). New tool features include: calculation of a yield estimate based on the source spectrum, display of a filtered version of the seismogram based on the selected band, and the output of codamag data records for processed events. EventID Tool implements event discrimination using phase ratios of regional arrivals (Hartse et al., 1997; Walter et al., 1999). New features include: bandpass filtering of displayed waveforms, screening of reference events based on SNR, multivariate discriminants, use of libcgi to access correction surfaces, and the output of discrim{_}data records for processed events. PhaseMatch Tool implements match filtering to isolate surface waves (Herrin and Goforth, 1977). New features include: display of the signal's observed dispersion and an option to use a station-based dispersion surface. Dendro Tool implements agglomerative hierarchical clustering using dendrograms to identify similar events based on waveform correlation (Everitt, 1993). New features include: modifications to include arrival information within the tool, and the capability to automatically add/re-pick arrivals based on the picked arrivals for similar events.« less

Review and Assessment of Commercial Vendors/Options for Feeding and Pumping Biomass Slurries for Hydrothermal Liquefaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglin, Eric J.; Enderlin, Carl W.; Schmidt, Andrew J.

2012-11-01

The National Advanced Biofuels Consortium is working to develop improved methods for producing high-value hydrocarbon fuels. The development of one such method, the hydrothermal liquefaction (HTL) process, is being led by the Pacific Northwest National Laboratory (PNNL). The HTL process uses a wet biomass slurry at elevated temperatures (i.e., 300 to 360°C [570 to 680°F]) and pressures above the vapor pressure of water (i.e., 15 to 20 MPa [2200 to 3000 psi] at these temperatures) to facilitate a condensed-phase reaction medium. The process has been successfully tested at bench-scale and development and testing at a larger scale is required tomore » prove the viability of the process at production levels. Near-term development plans include a pilot-scale system on the order of 0.5 to 40 gpm, followed by a larger production-scale system on the order of 2000 dry metric tons per day (DMTPD). A significant challenge to the scale-up of the HTL process is feeding a highly viscous fibrous biomass wood/corn stover feedstock into a pump system that provides the required 3000 psi of pressure for downstream processing. In October 2011, PNNL began investigating commercial feed and pumping options that would meet these HTL process requirements. Initial efforts focused on generating a HTL feed and pump specification and then providing the specification to prospective vendors to determine the suitability of their pumps for the pilot-scale and production-scale plants. Six vendors were identified that could provide viable equipment to meet HTL feed and/or pump needs. Those six vendors provided options consisting three types of positive displacement pumps (i.e., diaphragm, piston, and lobe pumps). Vendors provided capabilities and equipment related to HTL application. This information was collected, assessed, and summarized and is provided as appendices to this report.« less

Gold-based electrical interconnections for microelectronic devices

DOEpatents

Peterson, Kenneth A.; Garrett, Stephen E.; Reber, Cathleen A.; Watson, Robert D.

2002-01-01

A method of making an electrical interconnection from a microelectronic device to a package, comprising ball or wedge compression bonding a gold-based conductor directly to a silicon surface, such as a polysilicon bonding pad in a MEMS or IMEMS device, without using layers of aluminum or titanium disposed in-between the conductor and the silicon surface. After compression bonding, optional heating of the bond above 363 C. allows formation of a liquid gold-silicon eutectic phase containing approximately 3% (by weight) silicon, which significantly improves the bond strength by reforming and enhancing the initial compression bond. The same process can be used for improving the bond strength of Au--Ge bonds by forming a liquid Au-12Ge eutectic phase.

Effect of different signal-processing options on speech-in-noise recognition for cochlear implant recipients with the cochlear CP810 speech processor.

PubMed

Potts, Lisa G; Kolb, Kelly A

2014-04-01

Difficulty understanding speech in the presence of background noise is a common report among cochlear implant (CI) recipients. Several speech-processing options designed to improve speech recognition, especially in noise, are currently available in the Cochlear Nucleus CP810 speech processor. These include adaptive dynamic range optimization (ADRO), autosensitivity control (ASC), Beam, and Zoom. The purpose of this study was to evaluate CI recipients' speech-in-noise recognition to determine which currently available processing option or options resulted in best performance in a simulated restaurant environment. Experimental study with one study group. The independent variable was speech-processing option, and the dependent variable was the reception threshold for sentences score. Thirty-two adult CI recipients. Eight processing options were tested: Beam, Beam + ASC, Beam + ADRO, Beam + ASC + ADRO, Zoom, Zoom + ASC, Zoom + ADRO, and Zoom + ASC + ADRO. Participants repeated Hearing in Noise Test sentences presented at a 0° azimuth, with R-Space restaurant noise presented from a 360° eight-loudspeaker array at 70 dB sound pressure level. A one-way repeated-measures analysis of variance was used to analyze differences in Beam options, Zoom options, and Beam versus Zoom options. Among the Beam options, Beam + ADRO was significantly poorer than Beam only, Beam + ASC, and Beam + ASC + ADRO. A 1.6-dB difference was observed between the best (Beam only) and poorest (Beam + ADRO) options. Among the Zoom options, Zoom only and Zoom + ADRO were significantly poorer than Zoom + ASC. A 2.2-dB difference was observed between the best (Zoom + ASC) and poorest (Zoom only) options. The comparison between Beam and Zoom options showed one significant difference, with Zoom only significantly poorer than Beam only. No significant difference was found between the other Beam and Zoom options (Beam + ASC vs Zoom + ASC, Beam + ADRO vs Zoom + ADRO, and Beam + ASC + ADRO vs Zoom + ASC + ADRO). The best processing option varied across subjects, with an almost equal number of participants performing best with a Beam option (n = 15) compared with a Zoom option (n = 17). There were no significant demographic or audiological moderating variables for any option. The results showed no significant differences between adaptive directionality (Beam) and fixed directionality (Zoom) when ASC was active in the R-Space environment. This finding suggests that noise-reduction processing is extremely valuable in loud semidiffuse environments in which the effectiveness of directional filtering might be diminished. However, there was no significant difference between the Beam-only and Beam + ASC options, which is most likely related to the additional noise cancellation performed by the Beam option (i.e., two-stage directional filtering and noise cancellation). In addition, the processing options with ADRO resulted in the poorest performances. This could be related to how the CI recipients were programmed or the loud noise level used in this study. The best processing option varied across subjects, but the majority performed best with directional filtering (Beam or Zoom) in combination with ASC. Therefore in a loud semidiffuse environment, the use of either Beam + ASC or Zoom + ASC is recommended. American Academy of Audiology.

Assessment of the Vapor Phase Catalytic Ammonia Removal (VPCAR) Technology at the MSFC ECLS Test Facility

NASA Technical Reports Server (NTRS)

Tomes, Kristin; Long, David; Carter, Layne; Flynn, Michael

2007-01-01

The Vapor Phase Catalytic Ammonia. Removal (VPCAR) technology has been previously discussed as a viable option for. the Exploration Water Recovery System. This technology integrates a phase change process with catalytic oxidation in the vapor phase to produce potable water from exploration mission wastewaters. A developmental prototype VPCAR was designed, built and tested under funding provided by a National Research. Announcement (NRA) project. The core technology, a Wiped Film Rotating Device (WFRD) was provided by Water Reuse Technologies under the NRA, whereas Hamilton Sundstrand Space Systems International performed the hardware integration and acceptance test. of the system. Personnel at the-Ames Research Center performed initial systems test of the VPCAR using ersatz solutions. To assess the viability of this hardware for Exploration. Life Support (ELS) applications, the hardware has been modified and tested at the MSFC ECLS Test facility. This paper summarizes the hardware modifications and test results and provides an assessment of this technology for the ELS application.

Adopting a Single Planning Model in the Bulgarian Armed Forces at the Operational Level of War

DTIC Science & Technology

2013-06-13

Analysis ................................................................................. 36 BPP Phase 2 Operational Assessments of the Response Options...40 BPP Phase 3 Operational Orientation ....................................................................... 42

‘Much clearer with pictures’: using community-based participatory research to design and test a Picture Option Grid for underserved patients with breast cancer

PubMed Central

Durand, Marie-Anne; Alam, Shama; Grande, Stuart W; Elwyn, Glyn

2016-01-01

Objective Women of low socioeconomic status (SES) diagnosed with early stage breast cancer experience decision-making, treatment and outcome disparities. Evidence suggests that decision aids can benefit underserved patients, when tailored to their needs. Our aim was to develop and test the usability, acceptability and accessibility of a pictorial encounter decision aid targeted at women of low SES diagnosed with early stage breast cancer. Design Community-based participatory research (CBPR) using think-aloud protocols (phases 1 and 2) and semistructured interviews (phase 3). Setting Underserved community settings (eg, knitting groups, bingo halls, senior centres) and breast clinics. Participants In phase 1, we recruited a convenience sample of clinicians and academics. In phase 2, we targeted women over 40 years of age, of low SES, regardless of breast cancer history, and in phase 3, women of low SES, recently diagnosed with breast cancer. Intervention The pictorial encounter decision aid was derived from an evidence-based table comparing treatment options for breast cancer (http://www.optiongrid.org). Outcome measures We assessed the usability, acceptability and accessibility of the pictorial decision aid prototypes using the think-aloud protocol and semistructured interviews. Results After initial testing of the first prototype with 18 academics and health professionals, new versions were developed and tested with 53 lay individuals in community settings. Usability was high. In response to feedback indicating that the use of cartoon characters was considered insensitive, a picture-only version was developed and tested with 23 lay people in phase 2, and 10 target users in phase 3. Conclusions and relevance Using CBPR methods and iterative user testing cycles improved usability and accessibility, and led to the development of the Picture Option Grid, entirely guided by multiple stakeholder feedback. All women of low SES recently diagnosed with early stage breast cancer found the Picture Option Grid usable, acceptable and accessible. PMID:26839014

Upstream Optioneering: Optimising Higher Activity Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

McTeer, Jennifer; Morris, Jenny; Wickham, Stephen

2013-07-01

The Upstream Optioneering project was created by the Nuclear Decommissioning Authority (NDA) Radioactive Waste Management Directorate (RWMD) to support the development and implementation of opportunities to optimise the management of UK higher activity waste, spent fuel and other materials that may be disposed of in a geological disposal facility. The project works in an integrative manner with the NDA, RWMD and waste producers, and was split into three phases: - In Phase 1 waste management opportunities were identified and collated from across the NDA estate. - In Phase 2, opportunities collated during Phase 1, were further consolidated, analysed and prioritisedmore » to develop a three year work programme. Prioritisation ensured that resources were deployed appropriately and opportunities can be realised before the potential benefit diminishes. - Phase 3, which began in April 2012, comprises a three year work programme to address the prioritised opportunities. Work varies from direct implementation of opportunities to scoping studies that may pave the way for more detailed subsequent work by Site Licence Companies. The work programme is flexible and, subject to change control, varies depending on the needs of project sponsors (RWMD, NDA Strategy and NDA Delivery). This paper provides an overview of the Upstream Optioneering project (focusing particularly on Phases 2 and 3), summarises work carried out to date within the three year work programme, and provides some examples of the main findings concerning specific opportunities from Year One of the Phase 3 work programme. (authors)« less

Non-healing foot ulcers in diabetic patients: general and local interfering conditions and management options with advanced wound dressings.

PubMed

Uccioli, Luigi; Izzo, Valentina; Meloni, Marco; Vainieri, Erika; Ruotolo, Valeria; Giurato, Laura

2015-04-01

Medical knowledge about wound management has improved as recent studies have investigated the healing process and its biochemical background. Despite this, foot ulcers remain an important clinical problem, often resulting in costly, prolonged treatment. A non-healing ulcer is also a strong risk factor for major amputation. Many factors can interfere with wound healing, including the patient's general health status (i.e., nutritional condition indicated by albumin levels) or drugs such as steroids that can interfere with normal healing. Diabetic complications (i.e., renal insufficiency) may delay healing and account for higher amputation rates observed in diabetic patients under dialysis treatment. Wound environment (e.g., presence of neuropathy, ischaemia, and infection) may significantly influence healing by interfering with the physiological healing cascade and adding local release of factors that may worsen the wound. The timely and well-orchestrated release of factors regulating the healing process, observed in acute wounds, is impaired in non-healing wounds that are blocked in a chronic inflammatory phase without progressing to healing. This chronic phase is characterised by elevated protease activity (EPA) of metalloproteinases (MMPs) and serine proteases (e.g., human neutrophil elastase) that interfere with collagen synthesis, as well as growth factor release and action. EPA (mainly MMP 9, MMP-8 and elastase) and inflammatory factors present in the wound bed (such as IL-1, IL-6, and TNFa) account for the catabolic state of non-healing ulcers. The availability of wound dressings that modulate EPA has added new therapeutic options for treating non-healing ulcers. The literature confirms advantages obtained by reducing protease activity in the wound bed, with better outcomes achieved by using these dressings compared with traditional ones. New technologies also allow a physician to know the status of the wound bed environment, particularly EPA, in a clinical setting. These may be helpful in guiding a clinician's options in treating very difficult-to-heal ulcers.

Separating and stabilizing phosphate from high-level radioactive waste: process development and spectroscopic monitoring.

PubMed

Lumetta, Gregg J; Braley, Jenifer C; Peterson, James M; Bryan, Samuel A; Levitskaia, Tatiana G

2012-06-05

Removing phosphate from alkaline high-level waste sludges at the Department of Energy's Hanford Site in Washington State is necessary to increase the waste loading in the borosilicate glass waste form that will be used to immobilize the highly radioactive fraction of these wastes. We are developing a process which first leaches phosphate from the high-level waste solids with aqueous sodium hydroxide, and then isolates the phosphate by precipitation with calcium oxide. Tests with actual tank waste confirmed that this process is an effective method of phosphate removal from the sludge and offers an additional option for managing the phosphorus in the Hanford tank waste solids. The presence of vibrationally active species, such as nitrate and phosphate ions, in the tank waste processing streams makes the phosphate removal process an ideal candidate for monitoring by Raman or infrared spectroscopic means. As a proof-of-principle demonstration, Raman and Fourier transform infrared (FTIR) spectra were acquired for all phases during a test of the process with actual tank waste. Quantitative determination of phosphate, nitrate, and sulfate in the liquid phases was achieved by Raman spectroscopy, demonstrating the applicability of Raman spectroscopy for the monitoring of these species in the tank waste process streams.

Investigation on by-products of bioenergy systems (anaerobic digestion and gasification) as potential crop nutrient using FTIR, XRD, SEM analysis and phyto-toxicity test.

PubMed

Kataki, Sampriti; Hazarika, Samarendra; Baruah, D C

2017-07-01

Success and acceptability of the bio energy conversion technology to a large extent depend upon management of the inevitable by-products generated during the conversion process. By-products can be considered favourable as organic fertilizer as they retain nutrients with varying composition depending upon input biomass. However, characteristics of these heterogeneous resources with respect to feedstock and processing conditions have to be assessed to state on their agricultural and environmental benefits. Therefore, 3 types of anaerobic digestion by-products (digestate) from surplus biomass viz. cow dung, Ipomoea carnea:cow dung (60:40 dry weight basis) and rice straw:green gram stover:cow dung (30:30:40 dry weight basis) and one gasification by-product (biochar) from rice husk are considered to understand the fertilizer prospects. Considering 3 potential application options, digestate from each feedstock option was further processed as separated solid, separated liquid and ash from solid digestates. Thus, a total of 10 by-products were investigated for understanding their prospects as fertilizer using Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X ray Spectroscopy (EDX) and phyto-toxicity test to have a broad insight in terms of their organic, mineral, elemental composition, morphological feature and potential phyto-toxicity. In general, irrespective of origin of feedstock, solid digestate, ash digestate and char showed similarity in terms of composition of functional groups with some degree of variation in relative content as reflected by FTIR analysis. Dominance of organic functional groups in separated solid digestates compared to liquid fraction indicated the former as favourable organic amendments. Quartz was the prevalent mineral phase in all separated solid, ash digestate and rice husk char. Digestates in ash phase represent more concentrated plant nutrient source with higher content of K, Ca, P, Na and Mg than their respective solid phase. Application of ash digestates and char is likely to improve adsorptive capacity of soil for water and nutrient due to presence of relatively uniformly distributed porous particles. Liquid fraction of Ipomoea digestates exhibited inhibitory effect on seed germination of greengram (Vigna radiate) with significant reduction of germination index. Inhibitory effects of by-products were found to correlate negatively with their electrical conductivity and ammonia-nitrogen content. Understanding on spectroscopic, morphological and phytotoxic properties of different application options of bioenergy by-products would be useful for assessment of their appropriate use in agriculture. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mouse-tracking evidence for parallel anticipatory option evaluation.

PubMed

Cranford, Edward A; Moss, Jarrod

2017-12-23

In fast-paced, dynamic tasks, the ability to anticipate the future outcome of a sequence of events is crucial to quickly selecting an appropriate course of action among multiple alternative options. There are two classes of theories that describe how anticipation occurs. Serial theories assume options are generated and evaluated one at a time, in order of quality, whereas parallel theories assume simultaneous generation and evaluation. The present research examined the option evaluation process during a task designed to be analogous to prior anticipation tasks, but within the domain of narrative text comprehension. Prior research has relied on indirect, off-line measurement of the option evaluation process during anticipation tasks. Because the movement of the hand can provide a window into underlying cognitive processes, online metrics such as continuous mouse tracking provide more fine-grained measurements of cognitive processing as it occurs in real time. In this study, participants listened to three-sentence stories and predicted the protagonists' final action by moving a mouse toward one of three possible options. Each story was presented with either one (control condition) or two (distractor condition) plausible ending options. Results seem most consistent with a parallel option evaluation process because initial mouse trajectories deviated further from the best option in the distractor condition compared to the control condition. It is difficult to completely rule out all possible serial processing accounts, although the results do place constraints on the time frame in which a serial processing explanation must operate.

Achieving involvement: process outcomes from a cluster randomized trial of shared decision making skill development and use of risk communication aids in general practice.

PubMed

Elwyn, G; Edwards, A; Hood, K; Robling, M; Atwell, C; Russell, I; Wensing, M; Grol, R

2004-08-01

A consulting method known as 'shared decision making' (SDM) has been described and operationalized in terms of several 'competences'. One of these competences concerns the discussion of the risks and benefits of treatment or care options-'risk communication'. Few data exist on clinicians' ability to acquire skills and implement the competences of SDM or risk communication in consultations with patients. The aims of this study were to evaluate the effects of skill development workshops for SDM and the use of risk communication aids on the process of consultations. A cluster randomized trial with crossover was carried out with the participation of 20 recently qualified GPs in urban and rural general practices in Gwent, South Wales. A total of 747 patients with known atrial fibrillation, prostatism, menorrhagia or menopausal symptoms were invited to a consultation to review their condition or treatments. Half the consultations were randomly selected for audio-taping, of which 352 patients attended and were audio-taped successfully. After baseline, participating doctors were randomized to receive training in (i) SDM skills or (ii) the use of simple risk communication aids, using simulated patients. The alternative training was then provided for the final study phase. Patients were allocated randomly to a consultation during baseline or intervention 1 (SDM or risk communication aids) or intervention 2 phases. A randomly selected half of the consultations were audio-taped from each phase. Raters (independent, trained and blinded to study phase) assessed the audio-tapes using a validated scale to assess levels of patient involvement (OPTION: observing patient involvement), and to analyse the nature of risk information discussed. Clinicians completed questionnaires after each consultation, assessing perceived clinician-patient agreement and level of patient involvement in decisions. Multilevel modelling was carried out with the OPTION score as the dependent variable, and rater, consultation and clinician levels of data, standardized by rater within clinician. Following each of the interventions, the clinicians significantly increased their involvement of patients in decision making (OPTION score increased by 10.6 following risk communication training [95% confidence interval (CI) 7.9 -13.3; P < 0.001] and by 12.9 after SDM skill development (95% CI 10 -15.8, P < 0.001), a moderate effect size. The level of involvement achieved by the risk communication aids was significantly increased by the subsequent introduction of the skill development workshops (7.7 increase in OPTION score, 95% CI 3.4-12; P < 0.001). The alternative sequence (skills followed by risk communication aids) did not achieve this effect. The use of most risk information formats increased after the provision of specific risk communication aids (P < 0.001). Clinicians using the risk communication tools perceived significantly higher patient and clinician agreement on treatment (P < 0.001), patient satisfaction with information (P < 0.01), clinician satisfaction with decision (P < 0.01) and general overall satisfaction with the consultation (P < 0.001) than those who were exposed to SDM skill development workshops. These clinicians were able to acquire the skills to implement SDM competences and to use risk communication aids. Each intervention provided independent effects. Further progress towards greater patient involvement in health care decision making is possible, and skill development in this area should be incorporated into postgraduate professional development programmes.

Space station needs, attributes and architectural options study. Volume 1: Executive study

NASA Technical Reports Server (NTRS)

1983-01-01

Mission identification and validation, the benefits of a manned presence in space; attributes and architectures; time-phased mission and system requirements imposed on the space station; orbit selection; space station architectural options; technology selection; and program planning are addressed.

P-code enhanced method for processing encrypted GPS signals without knowledge of the encryption code

NASA Technical Reports Server (NTRS)

Young, Lawrence E. (Inventor); Meehan, Thomas K. (Inventor); Thomas, Jr., Jess Brooks (Inventor)

2000-01-01

In the preferred embodiment, an encrypted GPS signal is down-converted from RF to baseband to generate two quadrature components for each RF signal (L1 and L2). Separately and independently for each RF signal and each quadrature component, the four down-converted signals are counter-rotated with a respective model phase, correlated with a respective model P code, and then successively summed and dumped over presum intervals substantially coincident with chips of the respective encryption code. Without knowledge of the encryption-code signs, the effect of encryption-code sign flips is then substantially reduced by selected combinations of the resulting presums between associated quadrature components for each RF signal, separately and independently for the L1 and L2 signals. The resulting combined presums are then summed and dumped over longer intervals and further processed to extract amplitude, phase and delay for each RF signal. Precision of the resulting phase and delay values is approximately four times better than that obtained from straight cross-correlation of L1 and L2. This improved method provides the following options: separate and independent tracking of the L1-Y and L2-Y channels; separate and independent measurement of amplitude, phase and delay L1-Y channel; and removal of the half-cycle ambiguity in L1-Y and L2-Y carrier phase.

Solar Design Workbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franta, G.; Baylin, F.; Crowther, R.

1981-06-01

This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for themore » solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.« less

Hope and persuasion by physicians during informed consent.

PubMed

Miller, Victoria A; Cousino, Melissa; Leek, Angela C; Kodish, Eric D

2014-10-10

To describe hopeful and persuasive messages communicated by physicians during informed consent for phase I trials and examine whether such communication is associated with physician and parent ratings of the likelihood of benefit, physician and parent ratings of the strength of the physician's recommendation to enroll, parent ratings of control, and parent ratings of perceived pressure. Participants were children with cancer (n = 85) who were offered a phase I trial along with their parents and physicians. Informed consent conferences (ICCs) were audiotaped and coded for physician communication of hope and persuasion. Parents completed an interview (n = 60), and physicians completed a case-specific questionnaire. The most frequent hopeful statements related to expectations of positive outcomes and provision of options. Physicians failed to mention no treatment and/or palliative care as options in 68% of ICCs and that the disease was incurable in 85% of ICCs. When physicians mentioned no treatment and/or palliative care as options, both physicians and parents rated the physician's strength of recommendation to enroll in the trial lower. Hopes and goals other than cure or longer life were infrequently mentioned, and a minority of physicians communicated that the disease was incurable and that no treatment and/or palliative care were options. These findings are of concern, given the low likelihood of medical benefit from phase I trials. Physicians have an important role to play in helping families develop alternative goals when no curative options remain. © 2014 by American Society of Clinical Oncology.

Hope and Persuasion by Physicians During Informed Consent

PubMed Central

Miller, Victoria A.; Cousino, Melissa; Leek, Angela C.; Kodish, Eric D.

2014-01-01

Purpose To describe hopeful and persuasive messages communicated by physicians during informed consent for phase I trials and examine whether such communication is associated with physician and parent ratings of the likelihood of benefit, physician and parent ratings of the strength of the physician's recommendation to enroll, parent ratings of control, and parent ratings of perceived pressure. Patients and Methods Participants were children with cancer (n = 85) who were offered a phase I trial along with their parents and physicians. Informed consent conferences (ICCs) were audiotaped and coded for physician communication of hope and persuasion. Parents completed an interview (n = 60), and physicians completed a case-specific questionnaire. Results The most frequent hopeful statements related to expectations of positive outcomes and provision of options. Physicians failed to mention no treatment and/or palliative care as options in 68% of ICCs and that the disease was incurable in 85% of ICCs. When physicians mentioned no treatment and/or palliative care as options, both physicians and parents rated the physician's strength of recommendation to enroll in the trial lower. Conclusion Hopes and goals other than cure or longer life were infrequently mentioned, and a minority of physicians communicated that the disease was incurable and that no treatment and/or palliative care were options. These findings are of concern, given the low likelihood of medical benefit from phase I trials. Physicians have an important role to play in helping families develop alternative goals when no curative options remain. PMID:25199753

Space station functional relationships analysis

NASA Technical Reports Server (NTRS)

Tullis, Thomas S.; Bied, Barbra R.

1988-01-01

A systems engineering process is developed to assist Space Station designers to understand the underlying operational system of the facility so that it can be physically arranged and configured to support crew productivity. The study analyzes the operational system proposed for the Space Station in terms of mission functions, crew activities, and functional relationships in order to develop a quantitative model for evaluation of interior layouts, configuration, and traffic analysis for any Station configuration. Development of the model involved identification of crew functions, required support equipment, criteria of assessing functional relationships, and tools for analyzing functional relationship matrices, as well as analyses of crew transition frequency, sequential dependencies, support equipment requirements, potential for noise interference, need for privacy, and overall compatability of functions. The model can be used for analyzing crew functions for the Initial Operating Capability of the Station and for detecting relationships among these functions. Note: This process (FRA) was used during Phase B design studies to test optional layouts of the Space Station habitat module. The process is now being automated as a computer model for use in layout testing of the Space Station laboratory modules during Phase C.

Pricing of American style options with an adjoint process correction method

NASA Astrophysics Data System (ADS)

Jaekel, Uwe

2005-07-01

Pricing of American options is a more complicated problem than pricing of European options. In this work a formula is derived that allows the computation of the early exercise premium, i.e. the price difference between these two option types in terms of an adjoint process evolving in the reversed time direction of the original process determining the evolution of the European price. We show how this equation can be utilised to improve option price estimates from numerical schemes like finite difference or Monte Carlo methods.

Engineering assessment of inactive uranium mill tailings, Durango site, Durango, Colorado. A summary of the Phase II, Title I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-11-01

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Durango, Colorado. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 1.555 million tons of tailings at the Durango site constitutesmore » the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented range from vegetative stabilization (Option I), to contouring and stabilizing in-place with varying depths of cover material (Options II and III), to removal to an isolated long-term disposal site (Options V to VIII). All options include remedial action costs for offsite locations where tailings have been placed. Costs estimated for the eight options range from $4,340,000 to $13,590,000. Reprocessing the tailings for uranium is sufficiently economically attractive to justify reprocessing in conjunction with each of the options.« less

Engineering assessment of inactive uranium mill tailings, Durango site, Durango, Colorado. Phase II, Title I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-11-01

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Durango, Colorado. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 1.555 million tons of tailings at the Durango site constitutesmore » the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented range from vegetative stabilization (Option I), to contouring and stabilizing in-place with varying depths of cover material (Options II and III), to removal to an isolated long-term disposal site (Options V to VIII). All options include remedial action costs for offsite locations where tailings have been placed. Costs estimated for the eight options range from $4,340,000 to $13,590,000. Reprocessing the tailings for uranium is sufficiently economically attractive to justify reprocessing in conjunction with each of the options.« less

Development of a patient decision aid for people with refractory angina: protocol for a three-phase pilot study

PubMed Central

2014-01-01

Background Refractory angina is a severe chronic disease, defined as angina which cannot be controlled by usual treatments for heart disease. This disease is frightening, debilitating, and difficult to manage. Many people suffering refractory have inadequate pain relief, continually revisit emergency departments for help, undergo repeated cardiac investigations, and struggle with obtaining appropriate care. There is no clear framework to help people understand the risks and benefits of available treatment options in Canada. Some treatments for refractory angina are invasive, while others are not covered by provincial health insurance plans. Effective care for refractory angina sufferers in Canada is critically underdeveloped; it is important that healthcare professionals and refractory angina sufferers alike understand the treatment options and their implications. This proposal builds on the recent Canadian practice guidelines for the management of refractory angina. We propose to develop a decision support tool in order to help people suffering from refractory angina make well-informed decisions about their healthcare and reduce their uncertainty about treatment options. Methods This project will be conducted in three phases: a) development of the support tool with input from clinical experts, the Canadian refractory angina guidelines, and people living with refractory angina, b) pilot testing of the usability of the tool, and c) formal preliminary evaluation of the effectiveness of the support tool to help people make informed decisions about treatment options. Discussion A decision support tool for refractory angina is needed and the available data suggest that by developing such a tool, we may be able to help refractory angina sufferers better understand their condition and the effectiveness of available treatment options (in their respective clinical settings) as well as their implications (e.g. risks vs. benefits). By virtue of this tool, we may also be able to facilitate identification and inclusion of patients’ values and preferences in the decision making process. This is particularly important as refractory angina is an intractable condition, necessitating that the selected course of treatment be lifelong. This study will yield a much needed patient decision aid for people living with refractory angina and pilot data to support a subsequent effectiveness study. PMID:24920518

Ceramic Single Phase High-Level Nuclear Waste Forms: Hollandite, Perovskite, and Pyrochlore

NASA Astrophysics Data System (ADS)

Vetter, M.; Wang, J.

2017-12-01

The lack of viable options for the safe, reliable, and long-term storage of nuclear waste is one of the primary roadblocks of nuclear energy's sustainable future. The method being researched is the incorporation and immobilization of harmful radionuclides (Cs, Sr, Actinides, and Lanthanides) into the structure of glasses and ceramics. Borosilicate glasses are the main waste form that is accepted and used by today's nuclear industry, but they aren't the most efficient in terms of waste loading, and durability is still not fully understood. Synroc-phase ceramics (i.e. hollandite, perovskite, pyrochlore, zirconolite) have many attractive qualities that glass waste forms do not: high waste loading, moderate thermal expansion and conductivity, high chemical durability, and high radiation stability. The only downside to ceramics is that they are more complex to process than glass. New compositions can be discovered by using an Artificial Neural Network (ANN) to have more options to optimize the composition, loading for performance by analyzing the non-linear relationships between ionic radii, electronegativity, channel size, and a mineral's ability to incorporate radionuclides into its structure. Cesium can be incorporated into hollandite's A-site, while pyrochlore and perovskite can incorporate actinides and lanthanides into their A-site. The ANN is used to predict new compositions based on hollandite's channel size, as well as the A-O bond distances of pyrochlore and perovskite, and determine which ions can be incorporated. These new compositions will provide more options for more experiments to potentially improve chemical and thermodynamic properties, as well as increased waste loading capabilities.

ROBIS: A new tool to assess risk of bias in systematic reviews was developed.

PubMed

Whiting, Penny; Savović, Jelena; Higgins, Julian P T; Caldwell, Deborah M; Reeves, Barnaby C; Shea, Beverley; Davies, Philippa; Kleijnen, Jos; Churchill, Rachel

2016-01-01

To develop ROBIS, a new tool for assessing the risk of bias in systematic reviews (rather than in primary studies). We used four-stage approach to develop ROBIS: define the scope, review the evidence base, hold a face-to-face meeting, and refine the tool through piloting. ROBIS is currently aimed at four broad categories of reviews mainly within health care settings: interventions, diagnosis, prognosis, and etiology. The target audience of ROBIS is primarily guideline developers, authors of overviews of systematic reviews ("reviews of reviews"), and review authors who might want to assess or avoid risk of bias in their reviews. The tool is completed in three phases: (1) assess relevance (optional), (2) identify concerns with the review process, and (3) judge risk of bias. Phase 2 covers four domains through which bias may be introduced into a systematic review: study eligibility criteria; identification and selection of studies; data collection and study appraisal; and synthesis and findings. Phase 3 assesses the overall risk of bias in the interpretation of review findings and whether this considered limitations identified in any of the phase 2 domains. Signaling questions are included to help judge concerns with the review process (phase 2) and the overall risk of bias in the review (phase 3); these questions flag aspects of review design related to the potential for bias and aim to help assessors judge risk of bias in the review process, results, and conclusions. ROBIS is the first rigorously developed tool designed specifically to assess the risk of bias in systematic reviews. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Multiple dual mode counter-current chromatography with variable duration of alternating phase elution steps.

PubMed

Kostanyan, Artak E; Erastov, Andrey A; Shishilov, Oleg N

2014-06-20

The multiple dual mode (MDM) counter-current chromatography separation processes consist of a succession of two isocratic counter-current steps and are characterized by the shuttle (forward and back) transport of the sample in chromatographic columns. In this paper, the improved MDM method based on variable duration of alternating phase elution steps has been developed and validated. The MDM separation processes with variable duration of phase elution steps are analyzed. Basing on the cell model, analytical solutions are developed for impulse and non-impulse sample loading at the beginning of the column. Using the analytical solutions, a calculation program is presented to facilitate the simulation of MDM with variable duration of phase elution steps, which can be used to select optimal process conditions for the separation of a given feed mixture. Two options of the MDM separation are analyzed: 1 - with one-step solute elution: the separation is conducted so, that the sample is transferred forward and back with upper and lower phases inside the column until the desired separation of the components is reached, and then each individual component elutes entirely within one step; 2 - with multi-step solute elution, when the fractions of individual components are collected in over several steps. It is demonstrated that proper selection of the duration of individual cycles (phase flow times) can greatly increase the separation efficiency of CCC columns. Experiments were carried out using model mixtures of compounds from the GUESSmix with solvent systems hexane/ethyl acetate/methanol/water. The experimental results are compared to the predictions of the theory. A good agreement between theory and experiment has been demonstrated. Copyright © 2014 Elsevier B.V. All rights reserved.

ROBIS: A new tool to assess risk of bias in systematic reviews was developed

PubMed Central

Whiting, Penny; Savović, Jelena; Higgins, Julian P.T.; Caldwell, Deborah M.; Reeves, Barnaby C.; Shea, Beverley; Davies, Philippa; Kleijnen, Jos; Churchill, Rachel

2016-01-01

Objective To develop ROBIS, a new tool for assessing the risk of bias in systematic reviews (rather than in primary studies). Study Design and Setting We used four-stage approach to develop ROBIS: define the scope, review the evidence base, hold a face-to-face meeting, and refine the tool through piloting. Results ROBIS is currently aimed at four broad categories of reviews mainly within health care settings: interventions, diagnosis, prognosis, and etiology. The target audience of ROBIS is primarily guideline developers, authors of overviews of systematic reviews (“reviews of reviews”), and review authors who might want to assess or avoid risk of bias in their reviews. The tool is completed in three phases: (1) assess relevance (optional), (2) identify concerns with the review process, and (3) judge risk of bias. Phase 2 covers four domains through which bias may be introduced into a systematic review: study eligibility criteria; identification and selection of studies; data collection and study appraisal; and synthesis and findings. Phase 3 assesses the overall risk of bias in the interpretation of review findings and whether this considered limitations identified in any of the phase 2 domains. Signaling questions are included to help judge concerns with the review process (phase 2) and the overall risk of bias in the review (phase 3); these questions flag aspects of review design related to the potential for bias and aim to help assessors judge risk of bias in the review process, results, and conclusions. Conclusions ROBIS is the first rigorously developed tool designed specifically to assess the risk of bias in systematic reviews. PMID:26092286

Stochastic optimal control of ultradiffusion processes with application to dynamic portfolio management

NASA Astrophysics Data System (ADS)

Marcozzi, Michael D.

2008-12-01

We consider theoretical and approximation aspects of the stochastic optimal control of ultradiffusion processes in the context of a prototype model for the selling price of a European call option. Within a continuous-time framework, the dynamic management of a portfolio of assets is effected through continuous or point control, activation costs, and phase delay. The performance index is derived from the unique weak variational solution to the ultraparabolic Hamilton-Jacobi equation; the value function is the optimal realization of the performance index relative to all feasible portfolios. An approximation procedure based upon a temporal box scheme/finite element method is analyzed; numerical examples are presented in order to demonstrate the viability of the approach.

Multi-fuel reformers for fuel cells used in transportation. Phase 1: Multi-fuel reformers

NASA Astrophysics Data System (ADS)

1994-05-01

DOE has established the goal, through the Fuel Cells in Transportation Program, of fostering the rapid development and commercialization of fuel cells as economic competitors for the internal combustion engine. Central to this goal is a safe feasible means of supplying hydrogen of the required purity to the vehicular fuel cell system. Two basic strategies are being considered: (1) on-board fuel processing whereby alternative fuels such as methanol, ethanol or natural gas stored on the vehicle undergo reformation and subsequent processing to produce hydrogen, and (2) on-board storage of pure hydrogen provided by stationary fuel processing plants. This report analyzes fuel processor technologies, types of fuel and fuel cell options for on-board reformation. As the Phase 1 of a multi-phased program to develop a prototype multi-fuel reformer system for a fuel cell powered vehicle, the objective of this program was to evaluate the feasibility of a multi-fuel reformer concept and to select a reforming technology for further development in the Phase 2 program, with the ultimate goal of integration with a DOE-designated fuel cell and vehicle configuration. The basic reformer processes examined in this study included catalytic steam reforming (SR), non-catalytic partial oxidation (POX) and catalytic partial oxidation (also known as Autothermal Reforming, or ATR). Fuels under consideration in this study included methanol, ethanol, and natural gas. A systematic evaluation of reforming technologies, fuels, and transportation fuel cell applications was conducted for the purpose of selecting a suitable multi-fuel processor for further development and demonstration in a transportation application.

Enhancing mHealth Technology in the PCMH Environment to Activate Chronic Care Patients

DTIC Science & Technology

2016-09-01

9. Appendices…………………………………………………………… 16 Abstract for AMSUS Poster #1 Abstract for AMSUS Poster #2 Power Point sample slides from the mCare product... transfer ? (Not applicable for this reporting period)  What was the impact on society beyond science and technology? Phase II research will make an...and process requirements (e.g. interface with wireless communication providers, visualization capabilities and options, data analytic structure) while

Embedded Process Modeling, Analogy-Based Option Generation and Analytical Graphic Interaction for Enhanced User-Computer Interaction: An Interactive Storyboard of Next Generation User-Computer Interface Technology. Phase 1

DTIC Science & Technology

1988-03-01

structure of the interface is a mapping from the physical world [for example, the use of icons, which S have inherent meaning to users but represent...design alternatives. Mechanisms for linking the user to the computer include physical devices (keyboards), actions taken with the devices (keystrokes...VALUATION AIDES TEMLATEI IITCOM1I LATOR IACTICAL KNOWLEDGE ACGIUISITION MICNnII t 1 Fig. 9. INTACVAL. * OtJiCTs ARE PHYSICAL ENTITIES OR CONCEPTUAL EN

Experiment definition phase shuttle laboratory (LDRL-10.6 experiment): Shuttle sortie to elliptical orbit satellite

NASA Technical Reports Server (NTRS)

Goodwin, F. E.; Nussmeier, T. A.; Stokes, L. S.; Vourgourakis, E. J.

1976-01-01

The following topics were reviewed: (1) design options for shuttle terminal, (2) elliptical orbit satellite design options, (3) shuttle terminal details, (4) technology status and development requirements, (5) transmitter technology, and (6) carbon dioxide laser life studies.

Microencapsulation of metal-based phase change material for high-temperature thermal energy storage.

PubMed

Nomura, Takahiro; Zhu, Chunyu; Sheng, Nan; Saito, Genki; Akiyama, Tomohiro

2015-03-13

Latent heat storage using alloys as phase change materials (PCMs) is an attractive option for high-temperature thermal energy storage. Encapsulation of these PCMs is essential for their successful use. However, so far, technology for producing microencapsulated PCMs (MEPCMs) that can be used above 500°C has not been established. Therefore, in this study, we developed Al-Si alloy microsphere MEPCMs covered by α-Al2O3 shells. The MEPCM was prepared in two steps: (1) the formation of an AlOOH shell on the PCM particles using a boehmite treatment, and (2) heat-oxidation treatment in an O2 atmosphere to form a stable α-Al2O3 shell. The MEPCM presented a melting point of 573°C and latent heat of 247 J g(-1). The cycling performance showed good durability. These results indicated the possibility of using MEPCM at high temperatures. The MEPCM developed in this study has great promise in future energy and chemical processes, such as exergy recuperation and process intensification.

Microencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage

NASA Astrophysics Data System (ADS)

Nomura, Takahiro; Zhu, Chunyu; Sheng, Nan; Saito, Genki; Akiyama, Tomohiro

2015-03-01

Latent heat storage using alloys as phase change materials (PCMs) is an attractive option for high-temperature thermal energy storage. Encapsulation of these PCMs is essential for their successful use. However, so far, technology for producing microencapsulated PCMs (MEPCMs) that can be used above 500°C has not been established. Therefore, in this study, we developed Al-Si alloy microsphere MEPCMs covered by α-Al2O3 shells. The MEPCM was prepared in two steps: (1) the formation of an AlOOH shell on the PCM particles using a boehmite treatment, and (2) heat-oxidation treatment in an O2 atmosphere to form a stable α-Al2O3 shell. The MEPCM presented a melting point of 573°C and latent heat of 247 J g-1. The cycling performance showed good durability. These results indicated the possibility of using MEPCM at high temperatures. The MEPCM developed in this study has great promise in future energy and chemical processes, such as exergy recuperation and process intensification.

An empirical review of treatment and rehabilitation approaches used in the acute, sub-acute, and chronic phases of recovery following sports-related concussion.

PubMed

Elbin, R J; Schatz, Phil; Lowder, Harrison B; Kontos, Anthony P

2014-11-01

Several treatment and rehabilitation approaches for sport-related concussion have been mentioned in recent consensus and position statements. These options range from the more conservative behavioral management approaches to aggressive pharmacological and therapeutic interventions. Moreover, clinical decision-making for sport-related concussion changes as symptoms and impairments persist throughout recovery. The current article provides an empirical review of proposed treatment and rehabilitation options for sport-related concussion during the acute, subacute, and chronic phases of injury.

Manufacturing Methods for Cutting, Machining and Drilling Composites. Volume 1. Composites Machining Handbook

DTIC Science & Technology

1978-08-01

12°±30’ 1180±2° OPTIONAL .0005 IN./IN. BACK TAPER 015 RAD LIPS TO BE WITHIN .002 OF TRUE ANGULAR POSITION NOTES: 1. LAND WIDTH: 28% ± .005... horoscope and dye-penetrant requirements. 79 PHASE 1 PHASE II PHASE III PHASE IV CUTTING DRILLING MACHINING NONDESTRUCTIVE EVALUATION METHOD MATERIAL

Dairy cow preference for different types of outdoor access.

PubMed

Smid, Anne-Marieke C; Weary, Daniel M; Costa, Joao H C; von Keyserlingk, Marina A G

2018-02-01

Dairy cows display a partial preference for being outside, but little is known about what aspects of the outdoor environment are important to cows. The primary aim of this study was to test the preference of lactating dairy cattle for pasture versus an outdoor sand pack during the night. A secondary aim was to determine whether feeding and perching behavior changed when cows were provided outdoor access. A third objective was to investigate how the lying behavior of cows changed when given access to different outdoor areas. Ninety-six lactating pregnant cows were assigned to 8 groups of 12 animals each. After a baseline phase of 2 d in which cows were kept inside the freestall barn, cows were habituated to the outdoor areas by providing them access to each of the 2 options for 24 h. Cows were then given access, in random order by group, to either the pasture (pasture phase) or the sand pack (sand phase). As we tested the 2 outdoor options using space allowances consistent with what would be practical on commercial dairy farms, the space provided on pasture was larger (21,000 m 2 ) than that provided on the sand pack (144 m 2 ). Cows were tested at night (for 2 nights in each condition), from 2000 h until morning milking at approximately 0800 h, as preference to be outdoors is strongest at this time. During the next 3 nights cows were given access to both outside options simultaneously (choice phase). Feeding and perching behaviors were recorded when cows were indoors during the day and night periods. Lying behavior was automatically recorded by HOBO data loggers (Onset, Bourne, MA). Cows spent more time outside in the pasture phase (90.0 ± 5.9%) compared with the sand phase (44.4 ± 6.3%). When provided simultaneous access to both options, cows spent more time on pasture than on the sand pack (90.5 ± 2.6% vs. 0.8 ± 0.5%, respectively). Time spent feeding indoors during the day did not change regardless of what type of outdoor access was provided, but there was a decline in perching during the day when cows were provided access to either outdoor option at night. Lying time in the pasture phase was lower than in the baseline or sand phase. During the nighttime, lying time outside was not different between the sand (55.4 ± 7.9%) and pasture (52.0 ± 7.4%) phases. In summary, cows spent a considerable amount of time outside during the night when given the opportunity and showed a preference for a large pasture versus a small sand pack as an outdoor area. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The PIERDUB project: International Project on Education and Research in Donation at University of Barcelona: training university students about donation and transplantation.

PubMed

Manyalich, M; Paredes, D; Ballesté, C; Menjívar, A

2010-01-01

Donation and transplantation is an accepted therapeutic option when organ failure or tissue replacements are needed to save or improve the quality of life. However, in most medical schools there is no specific training for it, thus disregarding the key role of university students for the future success of the process. Knowledge diffusion about the donation procedure to clarify doubts and stimulate positive attitudes toward donation. Training university students in the donation and transplantation process. Research about the previous donation knowledge and the impact in donation indexes. Three different phases have been designed: (1) Training the University of Barcelona Health Sciences School students; (2) Training the Health Sciences School students in other faculties of Catalonia, Spain, and International; and (3) research. Since 2005, we have offered yearly an Optional Credits Course to medical students with duration of 45 hours, and two Donation days opened to health sciences students. Since 2007, promotional campaigns have been carried out in medicine and other health sciences faculties. Until now, 818 answered surveys have been collected to evaluate previous knowledge among university students. Training medical and other health sciences students in the donation process will improve quality of medical education and develop a trainer role for future professionals to help improve donation rates.

40 CFR 72.43 - Phase I reduced utilization plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.43 Phase I reduced... any Acid Rain emissions limitation or emissions reduction requirements during Phase I; and (ii) Meets... this section shall include in the Acid Rain permit application for the unit a reduced utilization plan...

40 CFR 72.43 - Phase I reduced utilization plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.43 Phase I reduced... any Acid Rain emissions limitation or emissions reduction requirements during Phase I; and (ii) Meets... this section shall include in the Acid Rain permit application for the unit a reduced utilization plan...

40 CFR 72.44 - Phase II repowering extensions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.44 Phase II repowering... the requirements of paragraph (a)(1)(i) of this section may include in the unit's Phase II Acid Rain... authority shall issue the Acid Rain portion of the operating permit including: (A) The approved repowering...

40 CFR 72.44 - Phase II repowering extensions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.44 Phase II repowering... the requirements of paragraph (a)(1)(i) of this section may include in the unit's Phase II Acid Rain... authority shall issue the Acid Rain portion of the operating permit including: (A) The approved repowering...

40 CFR 72.43 - Phase I reduced utilization plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.43 Phase I reduced... any Acid Rain emissions limitation or emissions reduction requirements during Phase I; and (ii) Meets... this section shall include in the Acid Rain permit application for the unit a reduced utilization plan...

40 CFR 72.44 - Phase II repowering extensions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.44 Phase II repowering... the requirements of paragraph (a)(1)(i) of this section may include in the unit's Phase II Acid Rain... authority shall issue the Acid Rain portion of the operating permit including: (A) The approved repowering...

40 CFR 72.44 - Phase II repowering extensions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.44 Phase II repowering... the requirements of paragraph (a)(1)(i) of this section may include in the unit's Phase II Acid Rain... authority shall issue the Acid Rain portion of the operating permit including: (A) The approved repowering...

40 CFR 72.43 - Phase I reduced utilization plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.43 Phase I reduced... any Acid Rain emissions limitation or emissions reduction requirements during Phase I; and (ii) Meets... this section shall include in the Acid Rain permit application for the unit a reduced utilization plan...

40 CFR 72.43 - Phase I reduced utilization plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.43 Phase I reduced... any Acid Rain emissions limitation or emissions reduction requirements during Phase I; and (ii) Meets... this section shall include in the Acid Rain permit application for the unit a reduced utilization plan...

40 CFR 72.44 - Phase II repowering extensions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.44 Phase II repowering... the requirements of paragraph (a)(1)(i) of this section may include in the unit's Phase II Acid Rain... authority shall issue the Acid Rain portion of the operating permit including: (A) The approved repowering...

Phase-change composites TES for nickel-hydrogen batteries

NASA Technical Reports Server (NTRS)

Knowles, Timothy R.; Meyer, Richard A.

1993-01-01

Viewgraphs of a discussion on phase-change composites thermal energy storage (TES) for nickel-hydrogen batteries are presented. Topics covered include Ni-H2 thermal control problems; passive thermal control with TES; phase-change composites (PCC); candidate materials; design options; fabrication and freeze-melt cycling; thermal modeling; system benefits; and applications.

Draft Site Treatment Plan (DSTP), Volumes I and II

DOE Office of Scientific and Technical Information (OSTI.GOV)

D`Amelio, J.

1994-08-30

Site Treatment Plans (STP) are required for facilities at which the DOE generates or stores mixed waste. This Draft Site Treatment Plan (DSTP) the second step in a three-phase process, identifies the currently preferred options for treating mixed waste at the Savannah River Site (SRS) or for developing treatment technologies where technologies do not exist or need modification. The DSTP reflects site-specific preferred options, developed with the state`s input and based on existing available information. To the extent possible, the DSTP identifies specific treatment facilities for treating the mixed waste and proposes schedules. Where the selection of specific treatment facilitiesmore » is not possible, schedules for alternative activities such as waste characterization and technology assessment are provided. All schedule and cost information presented is preliminary and is subject to change. The DSTP is comprised of two volumes: this Compliance Plan Volume and the Background Volume. This Compliance Plan Volume proposes overall schedules with target dates for achieving compliance with the land disposal restrictions (LDR) of RCRA and procedures for converting the target dates into milestones to be enforced under the Order. The more detailed discussion of the options contained in the Background Volume is provided for informational purposes only.« less

Participating in an International Stereotactic Radiotherapy Patient Registry: The Establishment of Data Collection Pathways.

PubMed

Yahya, Aylin; Arneric, Eva; Kernutt, Elizabeth; Baldacchino, Fiona; Haworth, Claire; Kedda, Mary-Anne; Tang, Colin; Bydder, Sean; Corica, Tammy

2017-06-29

Aim To describe data collection pathways and practical challenges experienced by an academic comprehensive cancer centre aiming to record clinical data for patients being treated with a novel radiotherapy treatment modality. Methods Various options to capture data from all patients treated with the CyberKnife Robotic Radiosurgery System at Sir Charles Gairdner Hospital (SCGH) in Western Australia were explored. An international multicenter web-based secure database established and maintained by the Radiosurgery Society the RSSearch® Patient Registry was selected. Data were collected and entered over four contiguous phases, with either opt-in or opt-out consent and the completion of Patient Reported Outcome questionnaires for specific sub-groups. Results Between April 2014 and June 2016, 461 patients at Sir Charles Gairdner Hospital were enrolled in the RSSearch® Patient Registry with the collection of over 17,500 data items. From 461 patients enrolled, 447 patients were treated with the CyberKnife Robotic Radiosurgery System. The majority of patients were treated for either a malignant primary (43.2%) or metastatic disease (39.4%). The establishment of matrix organisational processes for data collection led to the development of improved workflow patterns and data collection pathways. Conclusions This article describes the processes developed by a single centre to establish an efficient system for data collection and participation in an international registry. The opt-out approach was more efficient in terms of patient recruitment compared to the informed-consent method used in earlier phases. The experience of this single centre may help inform other institutions considering data collection options for assessments of new or novel treatments.

Suppressing ghost beams: Backlink options for LISA

NASA Astrophysics Data System (ADS)

Isleif, K.-S.; Gerberding, O.; Penkert, D.; Fitzsimons, E.; Ward, H.; Robertson, D.; Livas, J.; Mueller, G.; Reiche, J.; Heinzel, G.; Danzmann, K.

2017-05-01

In this article we discuss possible design options for the optical phase reference system, the so called backlink, between two moving optical benches in a LISA satellite. The candidates are based on two approaches: Fiber backlinks, with additional features like mode cleaning cavities and Faraday isolators, and free beam backlinks with angle compensation techniques. We will indicate dedicated ghost beam mitigation strategies for the design options and we will point out critical aspects in case of an implementation in LISA.

Advanced Navigation Strategies for an Asteroid Sample Return Mission

NASA Technical Reports Server (NTRS)

Bauman, J.; Getzandanner, K.; Williams, B.; Williams, K.

2011-01-01

The proximity operations phases of a sample return mission to an asteroid have been analyzed using advanced navigation techniques derived from experience gained in planetary exploration. These techniques rely on tracking types such as Earth-based radio metric Doppler and ranging, spacecraft-based ranging, and optical navigation using images of landmarks on the asteroid surface. Navigation strategies for the orbital phases leading up to sample collection, the touch down for collecting the sample, and the post sample collection phase at the asteroid are included. Options for successfully executing the phases are studied using covariance analysis and Monte Carlo simulations of an example mission to the near Earth asteroid 4660 Nereus. Two landing options were studied including trajectories with either one or two bums from orbit to the surface. Additionally, a comparison of post-sample collection strategies is presented. These strategies include remaining in orbit about the asteroid or standing-off a given distance until departure to Earth.

A Review of the Aging Process and Facilities Topic.

PubMed

Jornitz, Maik W

2015-01-01

Aging facilities have become a concern in the pharmaceutical and biopharmaceutical manufacturing industry, so much that task forces are formed by trade organizations to address the topic. Too often, examples of aging or obsolete equipment, unit operations, processes, or entire facilities have been encountered. Major contributors to this outcome are the failure to invest in new equipment, disregarding appropriate maintenance activities, and neglecting the implementation of modern technologies. In some cases, a production process is insufficiently modified to manufacture a new product in an existing process that was used to produce a phased-out product. In other instances, manufacturers expanded the facility or processes to fulfill increasing demand and the scaling occurred in a non-uniform manner, which led to non-optimal results. Regulatory hurdles of post-approval changes in the process may thwart companies' efforts to implement new technologies. As an example, some changes have required 4 years to gain global approval. This paper will address cases of aging processes and facilities aside from modernizing options. © PDA, Inc. 2015.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing new envelope technologies. This work is part of a multi-phase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysismore » of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall design with exterior continuous insulation (CI). Phase 3, completed in two stages, continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Modeling Single-Phase and Boiling Liquid Jet Impingement Cooling in Power Electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narumanchi, S. V. J.; Hassani, V.; Bharathan, D.

2005-12-01

Jet impingement has been an attractive cooling option in a number of industries over the past few decades. Over the past 15 years, jet impingement has been explored as a cooling option in microelectronics. Recently, interest has been expressed by the automotive industry in exploring jet impingement for cooling power electronics components. This technical report explores, from a modeling perspective, both single-phase and boiling jet impingement cooling in power electronics, primarily from a heat transfer viewpoint. The discussion is from the viewpoint of the cooling of IGBTs (insulated-gate bipolar transistors), which are found in hybrid automobile inverters.

Cooperative Driver Education and Safety Training. Instructor's Guide.

ERIC Educational Resources Information Center

Seyfarth, John T.; And Others

The program, designed to give the driver-training pupil a semester of 50 hours of instruction, involves four instructional phases, one of them optional to give flexibility to fit the varying needs of different school systems: Phase 1--the classroom phase, with 30 instructional hours devoted to 30 specific events, staggered at each school…

Reward Expectation Modulates Feedback-Related Negativity and EEG Spectra

PubMed Central

Cohen, Michael X; Elger, Christian E.; Ranganath, Charan

2007-01-01

The ability to evaluate outcomes of previous decisions is critical to adaptive decision-making. The feedback-related negativity (FRN) is an event-related potential (ERP) modulation that distinguishes losses from wins, but little is known about the effects of outcome probability on these ERP responses. Further, little is known about the frequency characteristics of feedback processing, for example, event-related oscillations and phase synchronizations. Here, we report an EEG experiment designed to address these issues. Subjects engaged in a probabilistic reinforcement learning task in which we manipulated, across blocks, the probability of winning and losing to each of two possible decision options. Behaviorally, all subjects quickly adapted their decision-making to maximize rewards. ERP analyses revealed that the probability of reward modulated neural responses to wins, but not to losses. This was seen both across blocks as well as within blocks, as learning progressed. Frequency decomposition via complex wavelets revealed that EEG responses to losses, compared to wins, were associated with enhanced power and phase coherence in the theta frequency band. As in the ERP analyses, power and phase coherence values following wins but not losses were modulated by reward probability. Some findings between ERP and frequency analyses diverged, suggesting that these analytic approaches provide complementary insights into neural processing. These findings suggest that the neural mechanisms of feedback processing may differ between wins and losses. PMID:17257860

A combined Cyanex-923/HEH[EHP]/Dodecane solvent for recovery of transuranic elements from used nuclear fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, A.; Nash, K.L.

2013-07-01

The separation of minor actinides from fission product lanthanides remains a primary challenge for enabling the recycle of used nuclear fuel. To minimize the complexity of materials handling, combining extractant processes has become an increasingly attractive option. Unfortunately, combined processes sometimes suffer reduced utility due to strong dipole-dipole interactions between the extractants. The results reported here describe a system based on a combination of commercially available extractants Cyanex-923 and HEH[EHP]. In contrast to other combined extractant systems, these extractant molecules exhibit comparatively weak interactions, reducing the impact of secondary interactions. In this process, mixtures containing equal ratios of Cyanex-923 andmore » HEH[EHP] were seen to co-extract americium and the lanthanides from nitric acid solutions. Stripping of An(III) was effectively achieved through contact with an aqueous phase comprised of glycine (for pH control) and a polyamino-poly-carboxylate stripping reagent that selectively removes An(III) from the extractant phase. The lanthanides can then be stripped from the loaded organic phase contacting with high nitric acid concentrations. Extraction of fission products zirconium and molybdenum was also investigated and potential strategies for their management have been identified. The work presented demonstrates the feasibility of combining Cyanex-923 and HEH[EHP] for separating and recovering the transuranic elements from the Ln(III). (authors)« less

Odanacatib, a New Drug for the Treatment of Osteoporosis: Review of the Results in Postmenopausal Women

PubMed Central

Pérez-Castrillón, José Luis; Pinacho, Florentino; De Luis, Daniel; Lopez-Menendez, María; Dueñas Laita, Antonio

2010-01-01

Osteoclasts are specialized cells that initiate the process of bone resorption, which has two phases, dissolution of the mineral component and degradation of the organic matrix, in which cathepsin K plays a key role. Cathepsin K inhibitors, which block the activity of cathepsin on bone resorption lacunae, may be a new therapeutic option in osteoporosis. Odanacatib is a nonpeptidic biaryl inhibitor of cathepsin K. Two studies have evaluated the efficacy and safety of odanacatib, a phase I study to determine the dose and a phase II study of safety and efficacy. Due to the long half-life of odanacatib and the similar effects of different doses on bone remodeling markers, a weekly dosage was chosen for the phase II trail, with the best results being obtained with a dose of 50 mg. At 36 months, increases in bone mineral density similar to those produced by other powerful antiresorptive drugs (zoledronate and denosumab) were observed but there were differences in the behaviour of bone remodeling markers. Data on fractures from the phase III trial currently in development are required to confirm these possible advantages. PMID:20948576

The relation between resource limitations and optional conceptual processing by children and adults.

PubMed

Ackerman, B P; Spiker, K; Bailey, K

1989-10-01

In some situations children fail to perform optional conceptual processing that they are able to perform. The purpose of the 4 experiments was to determine if the difficulty of word identification affects optional conceptual processing by second/third graders, fifth graders, and college students in a cued recall task. Conceptual processing was manipulated by presenting Hard (e.g., hawk eagle canary) or Easy (river lake canary) word triplets that varied in the contrastive processing necessary to identify the "odd" target word (canary). The orienting activity also varied: for the Oddity Choice activity, contrastive processing was obligatory because the subject had to identify the target; for the Read activity, contrastive processing was optional because the experimenter identified the target. A recall advantage for the Hard over the Easy triplets was the measure of contrastive processing. Finally, the difficulty of word identification varied in that the subjects read the stimuli or the experimenter read the stimuli, and all the words were degraded, only the nontarget words were degraded, or all the words were intact. The results established that contrastive processing facilitates recall, and that word identification difficulty may limit the extent of optional contrastive processing.

Evaluation of concepts for locomotive crew egress

DOT National Transportation Integrated Search

2003-03-01

This report presents the results of the first phase of a program to develop innovative concepts for a locomotive crew egress system. The program targeted rollover derailment accidents, where the options for crew egress are most limited. : In Phase I ...

Green noise wall construction and evaluation.

DOT National Transportation Integrated Search

2011-09-01

This report details the research performed under Phase I of a research study titled Green Noise Wall Construction and Evaluation that looks into the feasibility of using green noise barriers as a noise mitigation option in Ohio. This phase incl...

49 CFR 585.116 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Roof Crush Resistance Phase-in Reporting Requirements § 585.116 Reporting requirements. (a) General reporting requirements... years, or, at the manufacturer's option, for the current production year. A new manufacturer that has...

49 CFR 585.116 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Roof Crush Resistance Phase-in Reporting Requirements § 585.116 Reporting requirements. (a) General reporting requirements... years, or, at the manufacturer's option, for the current production year. A new manufacturer that has...

49 CFR 585.86 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Electronic Stability Control System Phase-In Reporting Requirements § 585.86 Reporting requirements. (a) General reporting..., or, at the manufacturer's option, for the current production year. A new manufacturer that has not...

49 CFR 585.86 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PHASE-IN REPORTING REQUIREMENTS Electronic Stability Control System Phase-In Reporting Requirements § 585.86 Reporting requirements. (a) General reporting..., or, at the manufacturer's option, for the current production year. A new manufacturer that has not...

Optogenetic Inhibition Reveals Distinct Roles for Basolateral Amygdala Activity at Discrete Time Points during Risky Decision Making.

PubMed

Orsini, Caitlin A; Hernandez, Caesar M; Singhal, Sarthak; Kelly, Kyle B; Frazier, Charles J; Bizon, Jennifer L; Setlow, Barry

2017-11-29

Decision making is a multifaceted process, consisting of several distinct phases that likely require different cognitive operations. Previous work showed that the basolateral amygdala (BLA) is a critical substrate for decision making involving risk of punishment; however, it is unclear how the BLA is recruited at different stages of the decision process. To this end, the current study used optogenetics to inhibit the BLA during specific task phases in a model of risky decision making (risky decision-making task) in which rats choose between a small, "safe" reward and a large reward accompanied by varying probabilities of footshock punishment. Male Long-Evans rats received intra-BLA microinjections of viral vectors carrying either halorhodopsin (eNpHR3.0-mCherry) or mCherry alone (control) followed by optic fiber implants and were trained in the risky decision-making task. Laser delivery during the task occurred during intertrial interval, deliberation, or reward outcome phases, the latter of which was further divided into the three possible outcomes (small, safe; large, unpunished; large, punished). Inhibition of the BLA selectively during the deliberation phase decreased choice of the large, risky outcome (decreased risky choice). In contrast, BLA inhibition selectively during delivery of the large, punished outcome increased risky choice. Inhibition had no effect during the other phases, nor did laser delivery affect performance in control rats. Collectively, these data indicate that the BLA can either inhibit or promote choice of risky options, depending on the phase of the decision process in which it is active. SIGNIFICANCE STATEMENT To date, most behavioral neuroscience research on neural mechanisms of decision making has used techniques that preclude assessment of distinct phases of the decision process. Here we show that optogenetic inhibition of the BLA has opposite effects on choice behavior in a rat model of risky decision making, depending on the phase in which inhibition occurs. BLA inhibition during a period of deliberation between small, safe and large, risky outcomes decreased risky choice. In contrast, BLA inhibition during receipt of the large, punished outcome increased risky choice. These findings highlight the importance of temporally targeted approaches to understand neural substrates underlying complex cognitive processes. More importantly, they reveal novel information about dynamic BLA modulation of risky choice. Copyright © 2017 the authors 0270-6474/17/3711537-12$15.00/0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, E.; Mullens, M.; Rath, P.

The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective envelope designs that can be effectively integrated into the plant production process while meeting the thermal requirements of the 2012 IECC standards. This work is part of a multiphase effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three methods for building high performance walls. Phase 2 focused on developing viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped narrow the research focus to perfecting a stud wall designmore » with exterior continuous insulation (CI). This report describes Phase 3, which was completed in two stages and continued the design development effort, exploring and evaluating a range or methods for applying CI to factory built homes. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing. During this phase, a home was built with CI, evaluated, and placed in service. The experience of building a mock up wall section with CI and then constructing on line a prototype home resolved important concerns about how to integrate the material into the production process. First steps were taken toward finding least expensive approaches for incorporating CI in standard factory building practices and a preliminary assessment suggested that even at this early stage the technology is attractive when viewed from a life cycle cost perspective.« less

Space station needs, attributes, and architectural options. Volume 1. Executive summary

NASA Technical Reports Server (NTRS)

Pritchard, E. B.

1983-01-01

The initial space station should be manned, placed in 28.5 deg orbit, and provide substantial economic, performance, and social benefits. The most beneficial space station capabilities include: a space test facility; a transport harbor; satellite servicing and assembly; and an observatory. A space industrial park could be added once further development effort validates the cost and expanding commercial market for space processed materials. The potential accrued gross mission model benefit derived from these capabilities is $5.9B without the industrial park, and $9.3B with it. An unclassified overview of all phases of the study is presented.

Targeting treatment technologies to address specific stormwater pollutants and numeric discharge limits.

PubMed

Clark, Shirley E; Pitt, Robert

2012-12-15

Stormwater treatment is entering a new phase with stormwater management systems being required to meet specific numeric objectives, as opposed to the historic approach of meeting guidance-document-provided percent removal rates. Meeting numeric discharge requirements will require designers to better understand and apply the physical, chemical, and biological processes underpinning these treatment technologies. This critical review paper focuses on the potential unit treatment operations available for stormwater treatment and outlines how to identify the most applicable treatment options based on the needed pollutant removal goals. Copyright © 2012 Elsevier Ltd. All rights reserved.

ASDA - Advanced Suit Design Analyzer computer program

NASA Technical Reports Server (NTRS)

Bue, Grant C.; Conger, Bruce C.; Iovine, John V.; Chang, Chi-Min

1992-01-01

An ASDA model developed to evaluate the heat and mass transfer characteristics of advanced pressurized suit design concepts for low pressure or vacuum planetary applications is presented. The model is based on a generalized 3-layer suit that uses the Systems Integrated Numerical Differencing Analyzer '85 in conjunction with a 41-node FORTRAN routine. The latter simulates the transient heat transfer and respiratory processes of a human body in a suited environment. The user options for the suit encompass a liquid cooled garment, a removable jacket, a CO2/H2O permeable layer, and a phase change layer.

Analysis and Evaluation of Processes and Equipment in Tasks 2 and 4 of the Low-cost Solar Array Project

NASA Technical Reports Server (NTRS)

Wolf, M.

1979-01-01

To facilitate the task of objectively comparing competing process options, a methodology was needed for the quantitative evaluation of their relative cost effectiveness. Such a methodology was developed and is described, together with three examples for its application. The criterion for the evaluation is the cost of the energy produced by the system. The method permits the evaluation of competing design options for subsystems, based on the differences in cost and efficiency of the subsystems, assuming comparable reliability and service life, or of competing manufacturing process options for such subsystems, which include solar cells or modules. This process option analysis is based on differences in cost, yield, and conversion efficiency contribution of the process steps considered.

Using A3 thinking to improve the STAT medication process.

PubMed

Manojlovich, Milisa; Chase, Valerie J; Mack, Megan; Conroy, Meghan K; Belanger, Karen; Zawol, Debbie; Corr, Karen M; Fowler, Karen E; Viglianti, Elizabeth

2014-08-01

Although the term STAT conveys a sense of urgency, it is sometimes used to circumvent a system that may be too slow to accomplish tasks in a timely manner. We describe a quality-improvement project undertaken by a US Department of Veterans Affairs (VA) hospital to improve the STAT medication process. We adapted A3 Thinking, a problem-solving process common in Lean organizations, to our problem. In the discovery phase, a color-coded flow map of the existing process was constructed, and a real-time STAT order was followed in a modified "Go to the Gemba" exercise. In the envisioning phase, the team brainstormed to come up with as many improvement ideas as possible, which were then prioritized based on the anticipated effort and impact. The team then identified initial experiments to be carried out in the experimentation phase; each experiment followed a standard Plan-Do-Study-Act cycle. On average, the number of STAT medications ordered per month decreased by 9.5%. The average time from STAT order entry to administration decreased by 21%, and time from medication delivery to administration decreased by 26%. Improvements were also made in technician awareness of STAT medications and nurse notification of STAT medication delivery. Adapting A3 Thinking for process improvement was a low-cost/low-tech option for a VA facility. The A3 Thinking process led to a better understanding of the meaning of STAT across disciplines, and promoted a collaborative culture in which other hospital-wide problems may be addressed in the future. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

The Role of Integrated Modelling and Assessment for Decision-Making: Lessons from Water Allocation Issues in Australia

NASA Astrophysics Data System (ADS)

Jakeman, A. J.; Guillaume, J. H. A.; El Sawah, S.; Hamilton, S.

2014-12-01

Integrated modelling and assessment (IMA) is best regarded as a process that can support environmental decision-making when issues are strongly contested and uncertainties pervasive. To be most useful, the process must be multi-dimensional and phased. Principally, it must be tailored to the problem context to encompass diverse issues of concern, management settings and stakeholders. This in turn requires the integration of multiple processes and components of natural and human systems and their corresponding spatial and temporal scales. Modellers therefore need to be able to integrate multiple disciplines, methods, models, tools and data, and many sources and types of uncertainty. These dimensions are incorporated into iteration between the various phases of the IMA process, including scoping, problem framing and formulation, assessing options and communicating findings. Two case studies in Australia are employed to share the lessons of how integration can be achieved in these IMA phases using a mix of stakeholder participation processes and modelling tools. One case study aims to improve the relevance of modelling by incorporating stakeholder's views of irrigated viticulture and water management decision making. It used a novel methodology with the acronym ICTAM, consisting of Interviews to elicit mental models, Cognitive maps to represent and analyse individual and group mental models, Time-sequence diagrams to chronologically structure the decision making process, an All-encompassing conceptual model, and computational Models of stakeholder decision making. The second case uses a hydro-economic river network model to examine basin-wide impacts of water allocation cuts and adoption of farm innovations. The knowledge exchange approach used in each case was designed to integrate data and knowledge bearing in mind the contextual dimensions of the problem at hand, and the specific contributions that environmental modelling was thought to be able to make.

Early Phase Contingency Trajectory Design for the Failure of the First Lunar Orbit Insertion Maneuver: Direct Recovery Options

NASA Astrophysics Data System (ADS)

Song, Young-Joo; Bae, Jonghee; Kim, Young-Rok; Kim, Bang-Yeop

2017-12-01

To ensure the successful launch of the Korea pathfinder lunar orbiter (KPLO) mission, the Korea Aerospace Research Institute (KARI) is now performing extensive trajectory design and analysis studies. From the trajectory design perspective, it is crucial to prepare contingency trajectory options for the failure of the first lunar brake or the failure of the first lunar orbit insertion (LOI) maneuver. As part of the early phase trajectory design and analysis activities, the required time of flight (TOF) and associated delta-V magnitudes for each recovery maneuver (RM) to recover the KPLO mission trajectory are analyzed. There are two typical trajectory recovery options, direct recovery and low energy recovery. The current work is focused on the direct recovery option. Results indicate that a quicker execution of the first RM after the failure of the first LOI plays a significant role in saving the magnitudes of the RMs. Under the conditions of the extremely tight delta-V budget that is currently allocated for the KPLO mission, it is found that the recovery of the KPLO without altering the originally planned mission orbit (a 100 km circular orbit) cannot be achieved via direct recovery options. However, feasible recovery options are suggested within the boundaries of the currently planned delta-V budget. By changing the shape and orientation of the recovered final mission orbit, it is expected that the KPLO mission may partially pursue its scientific mission after successful recovery, though it will be limited.

EVALUATION OF POLLUTION PREVENTION OPTIONS TO REDUCE STYRENE EMISSIONS FROM FIBER-REINFORCED PLASTIC OPEN MOLDING PROCESSES

EPA Science Inventory

Pollution prevention (P2) options to reduce styrene emissions, such as new materials, and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To me...

Practice parameters for the clinical evaluation and treatment of circadian rhythm sleep disorders. An American Academy of Sleep Medicine report.

PubMed

Morgenthaler, Timothy I; Lee-Chiong, Teofilo; Alessi, Cathy; Friedman, Leah; Aurora, R Nisha; Boehlecke, Brian; Brown, Terry; Chesson, Andrew L; Kapur, Vishesh; Maganti, Rama; Owens, Judith; Pancer, Jeffrey; Swick, Todd J; Zak, Rochelle

2007-11-01

The expanding science of circadian rhythm biology and a growing literature in human clinical research on circadian rhythm sleep disorders (CRSDs) prompted the American Academy of Sleep Medicine (AASM) to convene a task force of experts to write a review of this important topic. Due to the extensive nature of the disorders covered, the review was written in two sections. The first review paper, in addition to providing a general introduction to circadian biology, addresses "exogenous" circadian rhythm sleep disorders, including shift work disorder (SWD) and jet lag disorder (JLD). The second review paper addresses the "endogenous" circadian rhythm sleep disorders, including advanced sleep phase disorder (ASPD), delayed sleep phase disorder (DSPD), irregular sleep-wake rhythm (ISWR), and the non-24-hour sleep-wake syndrome (nonentrained type) or free-running disorder (FRD). These practice parameters were developed by the Standards of Practice Committee and reviewed and approved by the Board of Directors of the AASM to present recommendations for the assessment and treatment of CRSDs based on the two accompanying comprehensive reviews. The main diagnostic tools considered include sleep logs, actigraphy, the Morningness-Eveningness Questionnaire (MEQ), circadian phase markers, and polysomnography. Use of a sleep log or diary is indicated in the assessment of patients with a suspected circadian rhythm sleep disorder (Guideline). Actigraphy is indicated to assist in evaluation of patients suspected of circadian rhythm disorders (strength of recommendation varies from "Option" to "Guideline," depending on the suspected CRSD). Polysomnography is not routinely indicated for the diagnosis of CRSDs, but may be indicated to rule out another primary sleep disorder (Standard). There is insufficient evidence to justify the use of MEQ for the routine clinical evaluation of CRSDs (Option). Circadian phase markers are useful to determine circadian phase and confirm the diagnosis of FRD in sighted and unsighted patients but there is insufficient evidence to recommend their routine use in the diagnosis of SWD, JLD, ASPD, DSPD, or ISWR (Option). Additionally, actigraphy is useful as an outcome measure in evaluating the response to treatment for CRSDs (Guideline). A range of therapeutic interventions were considered including planned sleep schedules, timed light exposure, timed melatonin doses, hypnotics, stimulants, and alerting agents. Planned or prescribed sleep schedules are indicated in SWD (Standard) and in JLD, DSPD, ASPD, ISWR (excluding elderly-demented/nursing home residents), and FRD (Option). Specifically dosed and timed light exposure is indicated for each of the circadian disorders with variable success (Option). Timed melatonin administration is indicated for JLD (Standard); SWD, DSPD, and FRD in unsighted persons (Guideline); and for ASPD, FRD in sighted individuals, and for ISWR in children with moderate to severe psychomotor retardation (Option). Hypnotic medications may be indicated to promote or improve daytime sleep among night shift workers (Guideline) and to treat jet lag-induced insomnia (Option). Stimulants may be indicated to improve alertness in JLD and SWD (Option) but may have risks that must be weighed prior to use. Modafinil may be indicated to improve alertness during the night shift for patients with SWD (Guideline).

Non-adoption of Option B+ for prevention of mother-to-child transmission of HIV in Nigeria: A look at the policymaking process.

PubMed

Olakunde, Babayemi Oluwaseun; Ndukwe, Chinwendu Daniel

2017-02-01

In 2012, the World Health Organization recommended 'Option B+' (lifelong antiretroviral treatment for HIV-infected pregnant women regardless of their CD4 count or WHO clinical stage) for prevention of mother-to-child transmission of HIV-based on its operational and clinical advantages. By 2015, 21 out of the 22 Global Plan priority countries had adopted the Option B+ approach. Despite its huge HIV burden, Nigeria is the only country yet to adopt Option B+. We analyse the policymaking process on Option B+ in Nigeria from 2012-2015, highlighting how factors related to the content (uncertainty about Option B+, lack of local evidence), actors (interest and power) and context (low domestic funding and poor retention in care) affected the policymaking process and present the implications of this decision for improving HIV response in Nigeria.

A role for two-stage pharmacoeconomic appraisal? Is there a role for interim approval of a drug for reimbursement based on modelling studies with subsequent full approval using phase III data?

PubMed

Hill, Suzanne; Freemantle, Nick

2003-01-01

Healthcare decision makers and pharmaceutical companies are increasingly using techniques of economic evaluation, particularly modelling, to assist them in their decisions about drug purchasing and drug development. The use of models in other types of policy decisions is also well established. One option, to shorten the time to a purchasing decision, would be for an interim decision for approval for reimbursement to be based on an economic model. Such a system would mainly benefit the drug development process and thus the pharmaceutical industry; however the approach could also lead to poor decision making, unethical marketing and withdrawal of drugs from the consumer. In this article, we consider the option of a two-stage economic appraisal process from the point of view of the seller, the purchaser and the patient and public. Although a two-stage process may offer some advantages in terms of early return on investment and access, there are significant disadvantages in terms of certainty about effects and public policy and expenditure. Until there are better methods of predicting the effectiveness of a new product, it is unlikely that interim decisions can be seen as a reasonable health policy alternative, although it seems likely that industry may continue to lobby for such an approach.

Helping Water Utilities Grapple with Climate Change

NASA Astrophysics Data System (ADS)

Yates, D.; Gracely, B.; Miller, K.

2008-12-01

The Water Research Foundation (WRF), serving the drinking water industry and the National Center for Atmospheric Research (NCAR) are collaborating on an effort to develop and implement locally-relevant, structured processes to help water utilities consider the impacts and adaptation options that climate variability and change might have on their water systems. Adopting a case-study approach, the structured process include 1) a problem definition phase, focused on identifying goals, information needs, utility vulnerabilities and possible adaptation options in the face of climate and hydrologic uncertainty; 2) developing and/or modifying system-specific Integrated Water Resource Management (IWRM) models and conducting sensitivity analysis to identify critical variables; 3) developing probabilistic climate change scenarios focused on exploring uncertainties identified as important in the sensitivity analysis in step 2; and 4) implementing the structured process and examining approaches decision making under uncertainty. Collaborators include seven drinking water utilities and two state agencies: 1) The Inland Empire Utility Agency, CA; 2) The El Dorado Irrigation District, Placerville CA; 2) Portland Water Bureau, Portland OR; 3) Colorado Springs Utilities, Colo Spgs, CO; 4) Cincinnati Water, Cincinnati, OH; 5) Massachusetts Water Resources Authority (MWRA), Boston, MA; 6) Durham Water, Durham, NC; and 7) Palm Beach County Water (PBCW), Palm Beach, FL. The California Department of Water Resources and the Colorado Water Conservation Board were the state agencies that we have collaborated with.

Options for Hardening FinFETS with Flowable Oxide Between Fins

DTIC Science & Technology

2017-03-01

thus hardening by process is needed. Using the methodology of CV measurements on inexpensive experimental blanket oxides we have determined options...NY 10598 Abstract: A methodology using radiation-induced charge measurements by CV techniques on blanket oxides is shown to aid in the choice...of process options for hardening FinFETs. Net positive charge in flowable oxides was reduced by 50 % using a simple non -intrusive process change

Poroelastic Modeling as a Proof of Concept for Modular Representation of Coupled Geophysical Processes

NASA Astrophysics Data System (ADS)

Walker, R. L., II; Knepley, M.; Aminzadeh, F.

2017-12-01

We seek to use the tools provided by the Portable, Extensible Toolkit for Scientific Computation (PETSc) to represent a multiphysics problem in a form that decouples the element definition from the fully coupled equation through the use of pointwise functions that imitate the strong form of the governing equation. This allows allows individual physical processes to be expressed as independent kernels that may be then coupled with the existing finite element framework, PyLith, and capitalizes upon the flexibility offered by the solver, data management, and time stepping algorithms offered by PETSc. To demonstrate a characteristic example of coupled geophysical simulation devised in this manner, we present a model of a synthetic poroelastic environment, with and without the consideration of inertial effects, with fluid initially represented as a single phase. Matrix displacement and fluid pressure serve as the desired unknowns, with the option for various model parameters represented as dependent variables of the central unknowns. While independent of PyLith, this model also serves to showcase the adaptability of physics kernels for synthetic forward modeling. In addition, we seek to expand the base case to demonstrate the impact of modeling fluid as single phase compressible versus a single incompressible phase. As a goal, we also seek to include multiphase fluid modeling, as well as capillary effects.

Solar Electric and Chemical Propulsion Technology Applications to a Titan Orbiter/Lander Mission

NASA Technical Reports Server (NTRS)

Cupples, Michael

2007-01-01

Several advanced propulsion technology options were assessed for a conceptual Titan Orbiter/Lander mission. For convenience of presentation, the mission was broken into two phases: interplanetary and Titan capture. The interplanetary phase of the mission was evaluated for an advanced Solar Electric Propulsion System (SEPS), while the Titan capture phase was evaluated for state-of-art chemical propulsion (NTO/Hydrazine), three advanced chemical propulsion options (LOX/Hydrazine, Fluorine/Hydrazine, high Isp mono-propellant), and advanced tank technologies. Hence, this study was referred to as a SEPS/Chemical based option. The SEPS/Chemical study results were briefly compared to a 2002 NASA study that included two general propulsion options for the same conceptual mission: an all propulsive based mission and a SEPS/Aerocapture based mission. The SEP/Chemical study assumed identical science payload as the 2002 NASA study science payload. The SEPS/Chemical study results indicated that the Titan mission was feasible for a medium launch vehicle, an interplanetary transfer time of approximately 8 years, an advanced SEPS (30 kW), and current chemical engine technology (yet with advanced tanks) for the Titan capture. The 2002 NASA study showed the feasibility of the mission based on a somewhat smaller medium launch vehicle, an interplanetary transfer time of approximately 5.9 years, an advanced SEPS (24 kW), and advanced Aerocapture based propulsion technology for the Titan capture. Further comparisons and study results were presented for the advanced chemical and advanced tank technologies.

Health financing options for Fiji's health system.

PubMed

Pande, Madhukar

2003-09-01

Fiji is currently implementing health care reforms with the first phase of reforms focusing on decentralization of the health system. Part of this effort focuses on looking at financing options. Some options for financing health care include private health insurance, social insurance, community financing, user-pays system (out-of-pocket), health savings accounts, government taxation and subsidies, and overseas loans and aid funding. This paper addresses all these options in detail and provides an analysis into each of these options relevance to Fiji and in some instances to other nations in the South Pacific region. Given the relative small populations of Fiji and its neighbouring nations, a regional approach to financing could prove more viable in the longer-term, however political, social, economic, legal and cultural issues will need to seriously explored.

Heat and mass transfer are in the interaction of multi-pulsed spray with vertical surfaces in the regime of evaporative cooling

NASA Astrophysics Data System (ADS)

Karpov, P. N.; Nazarov, A. D.; Serov, A. F.; Terekhov, V. I.

2017-10-01

Sprays with a periodic supply drop phase have great opportunities to control the processes of heat transfer. We can achieve optimal evaporative modes of cooling by changing the pulse duration and the repetition frequency while minimizing flow of the liquid phase. Experimental data of investigation of local heat transfer for poorly heated large surface obtained on the original stand with multi nozzle managed the irrigation system impact of the gas-droplet flow present in this work. Researches on the contribution to the intensification of spray options were conducted. Also the growth rate was integral and local heat. Information instantaneous distribution of the heat flux in the description of the processes have helped us. Managed to describe two basic modes of heat transfer: Mode “insular” foil cooling and thick foil with forming of streams. Capacitive sensors allow to monitor the dynamics of the foil thickness, the birth-belt flow, forming and the evolution of waves generated by “bombing” the surface with the droplets.

Microencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage

PubMed Central

Nomura, Takahiro; Zhu, Chunyu; Sheng, Nan; Saito, Genki; Akiyama, Tomohiro

2015-01-01

Latent heat storage using alloys as phase change materials (PCMs) is an attractive option for high-temperature thermal energy storage. Encapsulation of these PCMs is essential for their successful use. However, so far, technology for producing microencapsulated PCMs (MEPCMs) that can be used above 500°C has not been established. Therefore, in this study, we developed Al-Si alloy microsphere MEPCMs covered by α-Al2O3 shells. The MEPCM was prepared in two steps: (1) the formation of an AlOOH shell on the PCM particles using a boehmite treatment, and (2) heat-oxidation treatment in an O2 atmosphere to form a stable α-Al2O3 shell. The MEPCM presented a melting point of 573°C and latent heat of 247 J g−1. The cycling performance showed good durability. These results indicated the possibility of using MEPCM at high temperatures. The MEPCM developed in this study has great promise in future energy and chemical processes, such as exergy recuperation and process intensification. PMID:25766648

The N-policy for an unreliable server with delaying repair and two phases of service

NASA Astrophysics Data System (ADS)

Choudhury, Gautam; Ke, Jau-Chuan; Tadj, Lotfi

2009-09-01

This paper deals with an MX/G/1 with an additional second phase of optional service and unreliable server, which consist of a breakdown period and a delay period under N-policy. While the server is working with any phase of service, it may break down at any instant and the service channel will fail for a short interval of time. Further concept of the delay time is also introduced. If no customer arrives during the breakdown period, the server becomes idle in the system until the queue size builds up to a threshold value . As soon as the queue size becomes at least N, the server immediately begins to serve the first phase of regular service to all the waiting customers. After the completion of which, only some of them receive the second phase of the optional service. We derive the queue size distribution at a random epoch and departure epoch as well as various system performance measures. Finally we derive a simple procedure to obtain optimal stationary policy under a suitable linear cost structure.

Cost-effectiveness analysis of apatinib treatment for chemotherapy-refractory advanced gastric cancer.

PubMed

Chen, Hong-Dou; Zhou, Jing; Wen, Feng; Zhang, Peng-Fei; Zhou, Ke-Xun; Zheng, Han-Rui; Yang, Yu; Li, Qiu

2017-02-01

Apatinib, a third-line or later treatment for advanced gastric cancer (aGC), was shown to improve overall survival and progression-free survival (PFS) compared with placebo in the phase III trial. Given the modest benefit with high costs, we further evaluated the cost-effectiveness of apatinib for patients with chemotherapy-refractory aGC. A Markov model was developed to simulate the disease process of aGC (PFS, progressive disease, and death) and estimate the incremental cost-effectiveness ratio (ICER) of apatinib to placebo. The health outcomes and utility scores were derived from the phase III trial and previously published sources, respectively. Total costs were calculated from the perspective of the Chinese health-care payer. Sensitivity analysis was used to explore model uncertainties. Treatment with apatinib was estimated to provide an incremental 0.09 quality-adjusted life years (QALYs) at an incremental cost of $8113.86 compared with placebo, which resulted in an ICER of $90,154.00 per QALY. Sensitivity analysis showed that across the wide variation of parameters, the ICER exceeded the willingness-to-pay threshold of $23,700.00 per QALY which was three times the Gross Domestic Product per Capita in China. Apatinib is not a cost-effective option for patients with aGC who experienced failure of at least two lines chemotherapy in China. However, for its positive clinical value and subliminal demand, apatinib can provide a new therapeutic option.

Adolescent Perspectives on Phase I Cancer Research

PubMed Central

Miller, Victoria A.; Baker, Justin N.; Leek, Angela C.; Hizlan, Sabahat; Rheingold, Susan R.; Yamokoski, Amy D.; Drotar, Dennis; Kodish, Eric

2012-01-01

Background The aim of this study was to examine adolescent patients’ perspectives on their understanding and decision making about a pediatric Phase I cancer study. Procedure Participants included adolescents ages 14-21 years with cancer (N = 20), all of whom attended a Phase I study consent conference. Participants responded to closed- and open-ended questions on a verbally administered structured interview, which assessed aspects of understanding and decision making about the Phase I study. Results All participants decided to enroll in the Phase I study. The majority of participants understood that participation was voluntary, entailed risks, and that they could withdraw. Most also believed that participation in the Phase I study would increase the length of their lives. The most frequent reasons for enrolling were positive clinical benefit, needing an option, impact on quality of life, and few side effects or fewer than those of current or past treatments. Eighty-five percent of participants reported that they themselves made the final decision about enrollment in the Phase I study. Conclusions Most participants hoped or expected that the Phase I study would provide a direct benefit (increased survival time or cure) and reported that they themselves were the final decision-maker about enrollment. Clinicians may underestimate the role of adolescents, especially if they believe that parents typically make such decisions. Future research should assess the actual participation of children and adolescents during the informed consent process and explore the role of hope in their decision making about Phase I studies. PMID:23034985

Refinement of a Conceptual Model for Adolescent Readiness to Engage in End-of-Life Discussions.

PubMed

Bell, Cynthia J; Zimet, Gregory D; Hinds, Pamela S; Broome, Marion E; McDaniel, Anna M; Mays, Rose M; Champion, Victoria L

Adolescents living with incurable cancer require ongoing support to process grief, emotions, and information as disease progresses including treatment options (phase 1 clinical trials and/or hospice/palliative care). Little is known about how adolescents become ready for such discussions. The purpose of this study was to explore the process of adolescent readiness for end-of-life preparedness discussions, generating a theoretical understanding for guiding clinical conversations when curative options are limited. We explored 2 in-depth cases across time using case-study methodology. An à priori conceptual model based on current end-of-life research guided data collection and analysis. Multiple sources including in-depth adolescent interviews generated data collection on model constructs. Analysis followed a logical sequence establishing a chain of evidence linking raw data to study conclusions. Synthesis and data triangulation across cases and time led to theoretical generalizations. Initially, we proposed a linear process of readiness with 3 domains: a cognitive domain (awareness), an emotional domain (acceptance), and a behavioral domain (willingness), which preceded preparedness. Findings led to conceptual model refinement showing readiness is a dynamic internal process that interacts with preparedness. Current awareness context facilitates the type of preparedness discussions (cognitive or emotional). Furthermore, social constraint inhibits discussions. Data support theoretical understanding of the dynamism of readiness. Future research that validates adolescent conceptualization will ensure age-appropriate readiness representation. Understanding the dynamic process of readiness for engaging in end-of-life preparedness provides clinician insight for guiding discussions that facilitate shared decision making and promote quality of life for adolescents and their families.

20 CFR 656.18 - Optional special recruitment and documentation procedures for college and university teachers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Optional special recruitment and... EMPLOYMENT OF ALIENS IN THE UNITED STATES Labor Certification Process § 656.18 Optional special recruitment... processing center. (b) Recruitment. The employer may recruit for college and university teachers under § 656...

[DNAStat, version 1.2 -- a software package for processing genetic profile databases and biostatistical calculations].

PubMed

Berent, Jarosław

2007-01-01

This paper presents the new DNAStat version 1.2 for processing genetic profile databases and biostatistical calculations. This new version contains, besides all the options of its predecessor 1.0, a calculation-results file export option in .xls format for Microsoft Office Excel, as well as the option of importing/exporting the population base of systems as .txt files for processing in Microsoft Notepad or EditPad

Financial management and dental school equity, Part II: Tactics.

PubMed

Chambers, David W; Bergstrom, Roy

2004-04-01

Financial management includes all processes that build organizations' equity through accumulating assets in strategically important areas. The tactical aspects of financial management are budget deployment and monitoring. Budget deployment is the process of making sure that costs are fairly allocated. Budget monitoring addresses issues of effective uses and outcomes of resources. This article describes contemporary deployment and monitoring mechanisms, including revenue positive and marginal analysis, present value, program phases, options logic, activity-based costing, economic value added, cost of quality, variance reconciliation, and balanced scorecards. The way financial decisions are framed affects comparative decision-making and even influences the arithmetic of accounting. Familiarity with these concepts should make it possible for dental educators to more fully participate in discussions about the relationships between budgeting and program strategy.

Quantitative Framework to Evaluate Alternative Dispute Resolution Investments in Architecture Engineering and Construction Projects Using Option and Real Option Theory

ERIC Educational Resources Information Center

Menassa, Carol Chukri

2009-01-01

A project-specific dispute resolution ladder (DRL) typically consists of multiple alternative dispute resolution (ADR) techniques that are chosen to assist in mitigating the impact of change orders and claims (CCO) occurring during the project construction phase, and avoid their escalation to protracted disputes that adversely affect a…

Asymmetric simple exclusion process on chains with a shortcut.

PubMed

Bunzarova, Nadezhda; Pesheva, Nina; Brankov, Jordan

2014-03-01

We consider the asymmetric simple exclusion process (TASEP) on an open network consisting of three consecutively coupled macroscopic chain segments with a shortcut between the tail of the first segment and the head of the third one. The model was introduced by Y.-M. Yuan et al. [J. Phys. A 40, 12351 (2007)] to describe directed motion of molecular motors along twisted filaments. We report here unexpected results which revise the previous findings in the case of maximum current through the network. Our theoretical analysis, based on the effective rates' approximation, shows that the second (shunted) segment can exist in both low- and high-density phases, as well as in the coexistence (shock) phase. Numerical simulations demonstrate that the last option takes place in finite-size networks with head and tail chains of equal length, provided the injection and ejection rates at their external ends are equal and greater than one-half. Then the local density distribution and the nearest-neighbor correlations in the middle chain correspond to a shock phase with completely delocalized domain wall. Upon moving the shortcut to the head or tail of the network, the density profile takes a shape typical of a high- or low-density phase, respectively. Surprisingly, the main quantitative parameters of that shock phase are governed by a positive root of a cubic equation, the coefficients of which linearly depend on the probability of choosing the shortcut. Alternatively, they can be expressed in a universal way through the shortcut current. The unexpected conclusion is that a shortcut in the bulk of a single lane may create traffic jams.

The neural basis of rationalization: cognitive dissonance reduction during decision-making.

PubMed

Jarcho, Johanna M; Berkman, Elliot T; Lieberman, Matthew D

2011-09-01

People rationalize the choices they make when confronted with difficult decisions by claiming they never wanted the option they did not choose. Behavioral studies on cognitive dissonance provide evidence for decision-induced attitude change, but these studies cannot fully uncover the mechanisms driving the attitude change because only pre- and post-decision attitudes are measured, rather than the process of change itself. In the first fMRI study to examine the decision phase in a decision-based cognitive dissonance paradigm, we observed that increased activity in right-inferior frontal gyrus, medial fronto-parietal regions and ventral striatum, and decreased activity in anterior insula were associated with subsequent decision-related attitude change. These findings suggest the characteristic rationalization processes that are associated with decision-making may be engaged very quickly at the moment of the decision, without extended deliberation and may involve reappraisal-like emotion regulation processes.

The neural basis of rationalization: cognitive dissonance reduction during decision-making

PubMed Central

Jarcho, Johanna M.; Berkman, Elliot T.

2011-01-01

People rationalize the choices they make when confronted with difficult decisions by claiming they never wanted the option they did not choose. Behavioral studies on cognitive dissonance provide evidence for decision-induced attitude change, but these studies cannot fully uncover the mechanisms driving the attitude change because only pre- and post-decision attitudes are measured, rather than the process of change itself. In the first fMRI study to examine the decision phase in a decision-based cognitive dissonance paradigm, we observed that increased activity in right-inferior frontal gyrus, medial fronto-parietal regions and ventral striatum, and decreased activity in anterior insula were associated with subsequent decision-related attitude change. These findings suggest the characteristic rationalization processes that are associated with decision-making may be engaged very quickly at the moment of the decision, without extended deliberation and may involve reappraisal-like emotion regulation processes. PMID:20621961

Engineering assessment of inactive uranium mill tailings, Gunnison Site, Gunnison, Colorado. Phase II, Title I

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1977-11-01

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Gunnison, Colorado. The Phase II - Title I services include the preparation of topographic measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 0.5 million tons of tailings at the Gunnison site constitutes the most significant environmental impact, although windblownmore » tailings and external gamma radiation are also factors. The nine alternative actions presented range from millsite decontamination (Option I), to adding various depths of stabilization cover material (Options II and III), to removal of the tailings to long-term storage sites and decontamination of the present site (Options IV through IX). Cost estimates for the nine options range from $480,000 to $5,890,000. Reprocessing the tailings for uranium does not appear to be economically attractive at present.« less

Extracting topographic structure from digital elevation data for geographic information-system analysis

USGS Publications Warehouse

Jenson, Susan K.; Domingue, Julia O.

1988-01-01

The first phase of analysis is a conditioning phase that generates three data sets: the original OEM with depressions filled, a data set indicating the flow direction for each cell, and a flow accumulation data set in which each cell receives a value equal to the total number of cells that drain to it. The original OEM and these three derivative data sets can then be processed in a variety of ways to optionally delineate drainage networks, overland paths, watersheds for userspecified locations, sub-watersheds for the major tributaries of a drainage network, or pour point linkages between watersheds. The computer-generated drainage lines and watershed polygons and the pour point linkage information can be transferred to vector-based geographic information systems for futher analysis. Comparisons between these computergenerated features and their manually delineated counterparts generally show close agreement, indicating that these software tools will save analyst time spent in manual interpretation and digitizing.

[Human resources for health in Chile: the reform's pending challenge].

PubMed

Méndez, Claudio A

2009-09-01

Omission of human resources from health policy development has been identified as a barrier in the health sector reform's adoption phase. Since 2002, Chile's health care system has been undergoing a transformation based on the principles of health as a human right, equity, solidarity, efficiency, and social participation. While the reform has set forth the redefinition of the medical professions, continuing education, scheduled accreditation, and the introduction of career development incentives, it has not considered management options tailored to the new setting, a human resources strategy that has the consensus of key players and sector policy, or a process for understanding the needs of health care staff and professionals. However, there is still time to undo the shortcomings, in large part because the reform's implementation phase only recently has begun. Overcoming this challenge is in the hands of the experts charged with designing public health strategies and policies.

Physiotherapists use a great variety of motor learning options in neurological rehabilitation, from which they choose through an iterative process: a retrospective think-aloud study.

PubMed

Kleynen, Melanie; Moser, Albine; Haarsma, Frederike A; Beurskens, Anna J; Braun, Susy M

2017-08-01

The goal of this study was to examine which motor learning options are applied by experienced physiotherapists in neurological rehabilitation, and how they choose between the different options. A descriptive qualitative approach was used. A purposive sample of five expert physiotherapists from the neurological ward of a rehabilitation center participated. Data were collected using nine videotaped therapy situations. During retrospective think-aloud interviews, the physiotherapists were instructed to constantly "think aloud" while they were watching their own videos. Five "operators" were identified: "act", "know", "observe", "assess" and "argue". The "act" operator consisted of 34 motor learning options, which were clustered into "instruction", "feedback" and "organization". The "know", "observe", "assess" and "argue" operators explained how therapists chose one of these options. The four operators seem to be interrelated and together lead to a decision to apply a particular motor learning option. Results show that the participating physiotherapists used a great variety of motor learning options in their treatment sessions. Further, the decision-making process with regard to these motor learning options was identified. Results may support future intervention studies that match the content and process of therapy in daily practice. The study should be repeated with other physiotherapists. Implications for Rehabilitation The study provided insight into the way experienced therapist handle the great variety of possible motor learning options, including concrete ideas on how to operationalize these options in specific situations. Despite differences in patients' abilities, it seems that therapists use the same underlying clinical reasoning process when choosing a particular motor learning option. Participating physiotherapists used more than the in guidelines suggested motor learning options and considered more than the suggested factors, hence adding practice based options of motor learning to the recommended ones in the guidelines. A think-aloud approach can be considered for peer-to-peer and student coaching to enhance discussion on the motor learning options applied and the underlying choices and to encourage research by practicing clinicians.

Computer-Generated Phase Diagrams for Binary Mixtures.

ERIC Educational Resources Information Center

Jolls, Kenneth R.; And Others

1983-01-01

Computer programs that generate projections of thermodynamic phase surfaces through computer graphics were used to produce diagrams representing properties of water and steam and the pressure-volume-temperature behavior of most of the common equations of state. The program, program options emphasizing thermodynamic features of interest, and…

[Effect of IGF-1 on proliferation and differentiation of primary human embryonic myoblasts].

PubMed

Cen, Shiqiang; Zhang, Junmei; Huang, Fuguo; Yang, Zhiming; Xie, Huiqi

2008-01-01

To investigate the effect of IGF-1 on the growth of primary human embryonic myoblasts. The method of incorporation of 3H-TdR was used to evaluate the ability of proliferation of myoblasts. The count per minute (CPM) values of myoblasts at different concentrations (1, 2, 4, 8, 16 and 32 ng/mL) of IGF-1 were measured, and dose-effect curves were drawn to choose the optional concentration of IGF-1 to promote the proliferation. Then the experimental group of myoblasts received the addition of the optional concentration of IGF-1 in the growth medium, the control group just received the growth medium. The flow cytometry was used to detect the cell cycle. The method of incorporation of 3H-TdR was used to measure the peak-CPM. The myotube fusion rate was measured in myoblasts withdifferent concentrations (0, 5, 10, 15, 20, 25 and 30 ng/mL) of IGF-1 in fusion medium, the dose-effect curves were also drawn, so as to decided the optional concentration of IGF-1 in stimulating differentiation. Fusion medium with optional concentration of IGF-1 was used in experimental group, and the control group just with fusion medium. The fusion rate of myotube and the synthesis of creatine kinase (CK) were detected in both groups. The optional concentration of 5 ng/mL IGF-1 was chosen for stimulating proliferation. It was shown that the time of cell cycle of control was 96 hours, but that of the experimental group was reduced to 60 hours. The results of flow cytometry showed that the time of G1 phase, S phase and G2M phase was 70.03, 25.01 and 0.96 hours respectively in control group, and were 22.66, 16.47 and 20.87 hours respectively in experimental group. The time-CPM value curves showed that the peak-CPM emerged at 96 hours in control group and 48 hours in experimental group, whichwas in agreement with the results of the flow cytometry. The optional concentration stimulating proliferation was 20 ng/mL IGF-1. Compared with control, the quantity of CK was increased by 2,000 mU/mL and the fusion rate was elevated by 30% in experimental group. The concentrations of 20 ng/mL IGF-1 can elevat obviously the fusion rate and the quantity of CK. IGF-1 can enhance the proliferation and differentiation of myoblasts via inducing the number of myoblasts at G1 phase and increasing the number of myoblasts at S and G2M phases.

Phase 3 Oncology Clinical Trials in South Africa: Experimentation or Therapeutic Misconception?

PubMed

Malan, Tina; Moodley, Keymanthri

2016-02-01

Although clinical research in oncology is vital to improve current understanding of cancer and to validate new treatment options, voluntary informed consent is a critical component. Oncology research participants are a particularly vulnerable population; hence, therapeutic misconception often leads to ethical and legal challenges. We conducted a qualitative study administering semi-structured questionnaires on 29 adult, Phase 3, oncology clinical trial participants at three different private oncology clinical trial sites in South Africa. A descriptive content analysis was performed to identify perceptions of these participants regarding Phase 3 clinical trials. We found that most participants provided consent to be included in the trial for self-benefit. More than half of the participants had a poor understanding of Phase 3 clinical trials, and almost half the participants believed the clinical trial did not pose any significant risk to them. The word "hope" was used frequently by participants, displaying clear optimism with regard to the clinical trial and its outcome. This indicated that therapeutic misconception does occur in the South African oncology research setting and has the potential to lead to underestimation of the risks of a Phase 3 clinical trial. Emphasizing the experimental nature of a clinical trial during the consent process is critical to address therapeutic misconception in oncology research. © The Author(s) 2016.

Effects of crosslinking on the mechanical properties, drug release and cytocompatibility of protein polymers.

PubMed

Martinez, Adam W; Caves, Jeffrey M; Ravi, Swathi; Li, Wehnsheng; Chaikof, Elliot L

2014-01-01

Recombinant elastin-like protein polymers are increasingly being investigated as component materials of a variety of implantable medical devices. This is chiefly a result of their favorable biological properties and the ability to tailor their physical and mechanical properties. In this report, we explore the potential of modulating the water content, mechanical properties, and drug release profiles of protein films through the selection of different crosslinking schemes and processing strategies. We find that the selection of crosslinking scheme and processing strategy has a significant influence on all aspects of protein polymer films. Significantly, utilization of a confined, fixed volume, as well as vapor-phase crosslinking strategies, decreased protein polymer equilibrium water content. Specifically, as compared to uncrosslinked protein gels, water content was reduced for genipin (15.5%), glutaraldehyde (GTA, 24.5%), GTA vapor crosslinking (31.6%), disulfide (SS, 18.2%) and SS vapor crosslinking (25.5%) (P<0.05). Distinct crosslinking strategies modulated protein polymer stiffness, strain at failure and ultimate tensile strength (UTS). In all cases, vapor-phase crosslinking produced the stiffest films with the highest UTS. Moreover, both confined, fixed volume and vapor-phase approaches influenced drug delivery rates, resulting in decreased initial drug burst and release rates as compared to solution phase crosslinking. Tailored crosslinking strategies provide an important option for modulating the physical, mechanical and drug delivery properties of protein polymers. Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Evaluation of different signal processing options in unilateral and bilateral cochlear freedom implant recipients using R-Space background noise.

PubMed

Brockmeyer, Alison M; Potts, Lisa G

2011-02-01

Difficulty understanding in background noise is a common complaint of cochlear implant (CI) recipients. Programming options are available to improve speech recognition in noise for CI users including automatic dynamic range optimization (ADRO), autosensitivity control (ASC), and a two-stage adaptive beamforming algorithm (BEAM). However, the processing option that results in the best speech recognition in noise is unknown. In addition, laboratory measures of these processing options often show greater degrees of improvement than reported by participants in everyday listening situations. To address this issue, Compton-Conley and colleagues developed a test system to replicate a restaurant environment. The R-SPACE™ consists of eight loudspeakers positioned in a 360 degree arc and utilizes a recording made at a restaurant of background noise. The present study measured speech recognition in the R-SPACE with four processing options: standard dual-port directional (STD), ADRO, ASC, and BEAM. A repeated-measures, within-subject design was used to evaluate the four different processing options at two noise levels. Twenty-seven unilateral and three bilateral adult Nucleus Freedom CI recipients. The participants' everyday program (with no additional processing) was used as the STD program. ADRO, ASC, and BEAM were added individually to the STD program to create a total of four programs. Participants repeated Hearing in Noise Test sentences presented at 0 degrees azimuth with R-SPACE restaurant noise at two noise levels, 60 and 70 dB SPL. The reception threshold for sentences (RTS) was obtained for each processing condition and noise level. In 60 dB SPL noise, BEAM processing resulted in the best RTS, with a significant improvement over STD and ADRO processing. In 70 dB SPL noise, ASC and BEAM processing had significantly better mean RTSs compared to STD and ADRO processing. Comparison of noise levels showed that STD and BEAM processing resulted in significantly poorer RTSs in 70 dB SPL noise compared to the performance with these processing conditions in 60 dB SPL noise. Bilateral participants demonstrated a bilateral improvement compared to the better monaural condition for both noise levels and all processing conditions, except ASC in 60 dB SPL noise. The results of this study suggest that the use of processing options that utilize noise reduction, like those available in ASC and BEAM, improve a CI recipient's ability to understand speech in noise in listening situations similar to those experienced in the real world. The choice of the best processing option is dependent on the noise level, with BEAM best at moderate noise levels and ASC best at loud noise levels for unilateral CI recipients. Therefore, multiple noise programs or a combination of processing options may be necessary to provide CI users with the best performance in a variety of listening situations. American Academy of Audiology.

Biochar from Biosolids Pyrolysis: A Review.

PubMed

Paz-Ferreiro, Jorge; Nieto, Aurora; Méndez, Ana; Askeland, Matthew Peter James; Gascó, Gabriel

2018-05-10

Ever increasing volumes of biosolids (treated sewage sludge) are being produced by municipal wastewater facilities. This is a consequence of the continued expansion of urban areas, which in turn require the commissioning of new treatment plants or upgrades to existing facilities. Biosolids contain nutrients and energy which can be used in agriculture or waste-to-energy processes. Biosolids have been disposed of in landfills, but there is an increasing pressure from regulators to phase out landfilling. This article performs a critical review on options for the management of biosolids with a focus on pyrolysis and the application of the solid fraction of pyrolysis (biochar) into soil.

Biochar from Biosolids Pyrolysis: A Review

PubMed Central

Nieto, Aurora; Méndez, Ana; Askeland, Matthew Peter James; Gascó, Gabriel

2018-01-01

Ever increasing volumes of biosolids (treated sewage sludge) are being produced by municipal wastewater facilities. This is a consequence of the continued expansion of urban areas, which in turn require the commissioning of new treatment plants or upgrades to existing facilities. Biosolids contain nutrients and energy which can be used in agriculture or waste-to-energy processes. Biosolids have been disposed of in landfills, but there is an increasing pressure from regulators to phase out landfilling. This article performs a critical review on options for the management of biosolids with a focus on pyrolysis and the application of the solid fraction of pyrolysis (biochar) into soil. PMID:29748488

Australian midwives views and experiences of practice and politics related to water immersion for labour and birth: A web based survey.

PubMed

Cooper, Megan; Warland, Jane; McCutcheon, Helen

2018-06-01

There is little published research that has examined practitioners' views and experiences of pain relieving measures commonly used during labour and birth, particularly for non-pharmacological measures such as water immersion. Furthermore, there is minimal published research examining the process of policy and guideline development, that is, the translation of published research to usable practice guidance. The aims of phase three of a larger study were to explore midwives knowledge, experiences and support for the option of water immersion for labour and birth in practice and their involvement, if any, in development of policy and guidelines pertaining to the option. Phase three of a three phased mixed methods study included a web based survey of 234 Australian midwives who had facilitated and/or been involved in the development of policies and/or guidelines relating to the practice of water immersion. Midwives who participated in this study were supportive of both water immersion for labour and birth reiterating documented benefits of reduced pain, maternal relaxation and a positive birth experience. The most significant concerns were maternal collapse, the difficulty of estimating blood loss and postpartum haemorrhage whilst barriers included lack of accredited staff, lifting equipment and negative attitudes. Midwives indicated that policy/guideline documents limited their ability to facilitate water immersion and did not always to support women's informed choice. Midwives who participated in this study supported the practice of water immersion reiterating the benefits documented in the literature and minimal risk to the woman and baby. The Human Research Ethics Committee of the University of South Australia approved the research. Copyright © 2017 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

A prototype software methodology for the rapid evaluation of biomanufacturing process options.

PubMed

Chhatre, Sunil; Francis, Richard; O'Donovan, Kieran; Titchener-Hooker, Nigel J; Newcombe, Anthony R; Keshavarz-Moore, Eli

2007-10-01

A three-layered simulation methodology is described that rapidly evaluates biomanufacturing process options. In each layer, inferior options are screened out, while more promising candidates are evaluated further in the subsequent, more refined layer, which uses more rigorous models that require more data from time-consuming experimentation. Screening ensures laboratory studies are focused only on options showing the greatest potential. To simplify the screening, outputs of production level, cost and time are combined into a single value using multi-attribute-decision-making techniques. The methodology was illustrated by evaluating alternatives to an FDA (U.S. Food and Drug Administration)-approved process manufacturing rattlesnake antivenom. Currently, antivenom antibodies are recovered from ovine serum by precipitation/centrifugation and proteolyzed before chromatographic purification. Alternatives included increasing the feed volume, replacing centrifugation with microfiltration and replacing precipitation/centrifugation with a Protein G column. The best alternative used a higher feed volume and a Protein G step. By rapidly evaluating the attractiveness of options, the methodology facilitates efficient and cost-effective process development.

Examination of Rotating Spoke Instability in a Cross-Field Discharge

DTIC Science & Technology

2013-07-08

leader), L. Balika, J. Vaudolon EMAU R. Schneider, K. Matyash PPPL Y. Raitses, A. Diallo, Y. Shi Distribution A: Approved for public...the spoke. The project was originally divided into three successive phases, namely: Phase 1: Time-averaged LIF study on the CHT at PPPL Phase 2...Time-resolved LIF study on the CHT at ICARE Phase 3: Time-resolved LIF study on a 2 kW HT at PPPL (Optional) Distribution A: Approved for public

Gas phase heterogeneous catalytic oxidation of alkanes to aliphatic ketones and/or other oxygenates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Manhua; Wang, Xiang; Yeom, Younghoon

A catalyst, its method of preparation and its use for producing aliphatic ketones by subjecting alkanes C.sub.3 to C.sub.9 to a gas phase catalytic oxidation in the presence of air or oxygen, and, optionally, steam and/or one or more diluting gases. The catalyst comprises a catalytically active mixed metal oxide phase and a suitable support material onto and/or into which the active catalytic phase id dispersed.

Gas phase heterogeneous catalytic oxidation of alkanes to aliphatic ketones and/or other oxygenates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Manhua; Wang, Xiang; Yeom, Younghoon

A catalyst, its method of preparation and its use for producing aliphatic ketones by subjecting alkanes C.sub.3 to C.sub.9 to a gas phase catalytic oxidation in the presence of air or oxygen, and, optionally, steam and/or one or more diluting gases. The catalyst comprises a catalytically active mixed metal oxide phase and a suitable support material onto and/or into which the active catalytic phase is dispersed.

SLS Scale Model Acoustic Test Liftoff Results and Comparisons

NASA Technical Reports Server (NTRS)

Houston, Janice; Counter, Douglas; Giacomoni, Clothilde

2015-01-01

The liftoff phase induces acoustic loading over a broad frequency range for a launch vehicle. These external acoustic environments are then used in the prediction of internal vibration responses of the vehicle and components which result in the qualification levels. Thus, predicting these liftoff acoustic (LOA) environments is critical to the design requirements of any launch vehicle. If there is a significant amount of uncertainty in the predictions or if acoustic mitigation options must be implemented, a subscale acoustic test is a feasible design phase test option to verify the LOA environments. The NASA Space Launch System (SLS) program initiated the Scale Model Acoustic Test (SMAT) to verify the predicted SLS LOA environments.

Multiple sclerosis and continence issues: an exploratory study.

PubMed

Wollin, Judy; Bennie, Mary; Leech, Christine; Windsor, Carol; Spencer, Nancy

The study described in this article aimed to identify issues relating to incontinence and assess the impact of referral to a continence adviser on the lives of people with multiple sclerosis (MS). The study design used an in-depth, two-phase anonymous mail survey within a general community as nominated by the participants. Fifty-six people participated in phase 1 and eleven people completed phase 2. The results indicated that incontinence is a problem for the vast majority of participants--people with MS. One-third of the eligible participants took up the option of a consultation, assessment and treatment from a continence nurse. Reasons for not taking up the visit from the continence nurse included 'managing OK', 'didn't think it would help', 'embarrassed' and 'too busy'. Increasing awareness of urinary incontinence in the community is important and education needs to focus on at-risk groups in presenting the range of options available to assist people experiencing incontinence.

Space transfer concepts and analyses for exploration missions: Technical directive 10

NASA Technical Reports Server (NTRS)

Woodcock, Gordon R.

1992-01-01

The current technical effort is part of the third phase of a broad-scoped and systematic study of space transfer concepts for human lunar and Mars missions. The study addressed issues that were raised during the previous phases but specifically on launch vehicle size trades and MEV options.

40 CFR 72.41 - Phase I substitution plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.41 Phase I substitution... section 410 of the Act. (b)(1) The designated representative may include, in the Acid Rain permit... an Acid Rain permit containing the plan, except that if the substitution plan is conditionally...

40 CFR 72.41 - Phase I substitution plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.41 Phase I substitution... section 410 of the Act. (b)(1) The designated representative may include, in the Acid Rain permit... an Acid Rain permit containing the plan, except that if the substitution plan is conditionally...

40 CFR 72.41 - Phase I substitution plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.41 Phase I substitution... section 410 of the Act. (b)(1) The designated representative may include, in the Acid Rain permit... an Acid Rain permit containing the plan, except that if the substitution plan is conditionally...

40 CFR 72.41 - Phase I substitution plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.41 Phase I substitution... section 410 of the Act. (b)(1) The designated representative may include, in the Acid Rain permit... an Acid Rain permit containing the plan, except that if the substitution plan is conditionally...

40 CFR 72.41 - Phase I substitution plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) PERMITS REGULATION Acid Rain Compliance Plan and Compliance Options § 72.41 Phase I substitution... section 410 of the Act. (b)(1) The designated representative may include, in the Acid Rain permit... an Acid Rain permit containing the plan, except that if the substitution plan is conditionally...

Document Image Processing: Going beyond the Black-and-White Barrier. Progress, Issues and Options with Greyscale and Colour Image Processing.

ERIC Educational Resources Information Center

Hendley, Tom

1995-01-01

Discussion of digital document image processing focuses on issues and options associated with greyscale and color image processing. Topics include speed; size of original document; scanning resolution; markets for different categories of scanners, including photographic libraries, publishing, and office applications; hybrid systems; data…

Tritordeum: a novel cereal for food processing with good acceptability and significant reduction in gluten immunogenic peptides in comparison with wheat.

PubMed

Vaquero, Luis; Comino, Isabel; Vivas, Santiago; Rodríguez-Martín, Laura; Giménez, María J; Pastor, Jorge; Sousa, Carolina; Barro, Francisco

2018-04-01

Tritordeum is a novel cereal obtained from the hybridization between durum wheat and a wild barley. This study evaluates acceptance, digestibility and immunotoxic properties of tritordeum, a novel cereal for food processing. Nineteen healthy volunteers participated in a study with different diets to compare tritordeum bread with wheat and gluten-free breads. Tritordeum breads had a similar acceptance to the wheat bread usually consumed, and the acceptance was significantly higher than the gluten-free bread and standardized wheat bread supplied in the study. There was no evidence for gastrointestinal symptoms among volunteers during the study. The reductions in the numbers of immunogenic epitopes in tritordeum in comparison with wheat were 78% for α-gliadins, 57% for γ-gliadins and 93% for ω-gliadins. The analysis of gluten immunogenic peptides (GIP) in stool samples showed a significantly lower excretion in the tritordeum ingestion phase than in the wheat ingestion phase. These results suggest that tritordeum may be an option of interest for general food processing, and especially for those who want to reduce their intake of gluten. However, it is not suitable for celiac disease sufferers as it contains gluten. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Melt processed crystalline ceramic waste forms for advanced nuclear fuel cycles: CRP T21027 1813: Processing technologies for high level waste, formulation of matrices and characterization of waste forms, task 17208: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J. W.; Marra, J. C.

2015-08-26

A multi-phase ceramic waste form is being developed at the Savannah River National Laboratory (SRNL) for treatment of secondary waste streams generated by reprocessing commercial spent nuclear. The envisioned waste stream contains a mixture of transition, alkali, alkaline earth, and lanthanide metals. Ceramic waste forms are tailored (engineered) to incorporate waste components as part of their crystal structure based on knowledge from naturally found minerals containing radioactive and non-radioactive species similar to the radionuclides of concern in wastes from fuel reprocessing. The ability to tailor ceramics to mimic naturally occurring crystals substantiates the long term stability of such crystals (ceramics)more » over geologic timescales of interest for nuclear waste immobilization [1]. A durable multi-phase ceramic waste form tailored to incorporate all the waste components has the potential to broaden the available disposal options and thus minimize the storage and disposal costs associated with aqueous reprocessing. This report summarizes results from three years of work on the IAEA Coordinated Research Project on “Processing technologies for high level waste, formulation of matrices and characterization of waste forms” (T21027), and specific task “Melt Processed Crystalline Ceramic Waste Forms for Advanced Nuclear Fuel Cycles” (17208).« less

Melt processed crystalline ceramic waste forms for advanced nuclear fuel cycles: CRP T21027 1813: Processing technologies for high level waste, formulation of matrices and characterization of waste forms, Task 17208: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J. W.; Marra, J. C.

2015-08-26

A multi-phase ceramic waste form is being developed at the Savannah River National Laboratory (SRNL) for treatment of secondary waste streams generated by reprocessing commercial spent nuclear. The envisioned waste stream contains a mixture of transition, alkali, alkaline earth, and lanthanide metals. Ceramic waste forms are tailored (engineered) to incorporate waste components as part of their crystal structure based on knowledge from naturally found minerals containing radioactive and non-radioactive species similar to the radionuclides of concern in wastes from fuel reprocessing. The ability to tailor ceramics to mimic naturally occurring crystals substantiates the long term stability of such crystals (ceramics)more » over geologic timescales of interest for nuclear waste immobilization [1]. A durable multi-phase ceramic waste form tailored to incorporate all the waste components has the potential to broaden the available disposal options and thus minimize the storage and disposal costs associated with aqueous reprocessing. This report summarizes results from three years of work on the IAEA Coordinated Research Project on “Processing technologies for high level waste, formulation of matrices and characterization of waste forms” (T21027), and specific task “Melt Processed Crystalline Ceramic Waste Forms for Advanced Nuclear Fuel Cycles” (17208).« less

Modeling of Solid Waste Processing Options in BIO-Plex

NASA Technical Reports Server (NTRS)

Rodriguez, Luis F.; Finn, Cory; Kang, Sukwon; Hogan, John; Luna, Bernadette (Technical Monitor)

2000-01-01

BIO-Plex is a ground-based test bed currently under development by NASA for testing technologies and practices that may be utilized in future long-term life support missions. All aspects of such an Advanced Life Support (ALS) System must be considered to confidently construct a reliable system, which will not only allow the crew to survive in harsh environments, but allow the crew time to perform meaningful research. Effective handling of solid wastes is a critical aspect of the system, especially when recovery of resources contained in the waste is required. This is particularly important for ALS Systems configurations that include a Biomass Production Chamber. In these cases, significant amounts of inedible biomass waste may be produced, which can ultimately serve as a repository of necessary resources for sustaining life, notably carbon, water, and plant nutrients. Numerous biological and physicochemical solid waste processing options have been considered. Biological options include composting, aerobic digestion, and anaerobic digestion. Physicochemical options include pyrolysis, SCWO (supercritical water oxidation), various incineration configurations, microwave incineration, magnetically assisted gasification, and low temperature plasma reaction. Modeling of these options is a necessary step to assist in the design process. A previously developed top-level model of BIO-Plex implemented in MATLAB Simulink (r) for the use of systems analysis and design has been adopted for this analysis. Presently, this model only considered incineration for solid waste processing. Present work, reported here, includes the expansion of this model to include a wider array of solid waste processing options selected from the above options, bearing in mind potential, near term solid waste treatment systems. Furthermore, a trade study has also been performed among these solid waste processing technologies in an effort to determine the ideal technology for long-term life support missions.

Exploring the use of Option Grid™ patient decision aids in a sample of clinics in Poland.

PubMed

Scalia, Peter; Elwyn, Glyn; Barr, Paul; Song, Julia; Zisman-Ilani, Yaara; Lesniak, Monika; Mullin, Sarah; Kurek, Krzysztof; Bushell, Matt; Durand, Marie-Anne

2018-05-29

Research on the implementation of patient decision aids to facilitate shared decision making in clinical settings has steadily increased across Western countries. A study which implements decision aids and measures their impact on shared decision making has yet to be conducted in the Eastern part of Europe. To study the use of Option Grid TM patient decision aids in a sample of Grupa LUX MED clinics in Warsaw, Poland, and measure their impact on shared decision making. We conducted a pre-post interventional study. Following a three-month period of usual care, clinicians from three Grupa LUX MED clinics received a one-hour training session on how to use three Option Grid TM decision aids and were provided with copies for use for four months. Throughout the study, all eligible patients were asked to complete the three-item CollaboRATE patient-reported measure of shared decision making after their clinical encounter. CollaboRATE enables patients to assess the efforts clinicians make to: (i) inform them about their health issues; (ii) listen to 'what matters most'; (iii) integrate their treatment preference in future plans. A Hierarchical Logistic Regression model was performed to understand which variables had an effect on CollaboRATE. 2,048 patients participated in the baseline phase; 1,889 patients participated in the intervention phase. Five of the thirteen study clinicians had a statistically significant increase in their CollaboRATE scores (p<.05) when comparing baseline phase to intervention phase. All five clinicians were located at the same clinic, the only clinic where an overall increase (non-significant) in the mean CollaboRATE top score percentage occurred from baseline phase (M=60 %, SD=0.49; 95 % CI [57-63 %]) to intervention phase (M=62 %, SD=0.49; 95% CI [59-65%]). Only three of those five clinicians who had a statistically significant increase had a clinically significant difference. The implementation of Option Grid TM helped some clinicians practice shared decision making as reflected in CollaboRATE scores, but most clinicians did not have a significant increase in their scores. Our study indicates that the effect of these interventions may be dependent on clinic contexts and clinician engagement. Copyright © 2018. Published by Elsevier GmbH.

Quantity Distance for the Kennedy Space Center Vehicle Assembly Building for Solid Propellant Fueled Launchers

NASA Technical Reports Server (NTRS)

Stover, Steven; Diebler, Corey; Frazier, Wayne

2006-01-01

The NASA KSC VAB was built to process Apollo launchers in the 1960's, and later adapted to process Space Shuttles. The VAB has served as a place to assemble solid rocket motors (5RM) and mate them to the vehicle's external fuel tank and Orbiter before rollout to the launch pad. As Space Shuttle is phased out, and new launchers are developed, the VAB may again be adapted to process these new launchers. Current launch vehicle designs call for continued and perhaps increased use of SRM segments; hence, the safe separation distances are in the process of being re-calculated. Cognizant NASA personnel and the solid rocket contractor have revisited the above VAB QD considerations and suggest that it may be revised to allow a greater number of motor segments within the VAB. This revision assumes that an inadvertent ignition of one SRM stack in its High Bay need not cause immediate and complete involvement of boosters that are part of a vehicle in adjacent High Bay. To support this assumption, NASA and contractor personnel proposed a strawman test approach for obtaining subscale data that may be used to develop phenomenological insight and to develop confidence in an analysis model for later use on full-scale situations. A team of subject matter experts in safety and siting of propellants and explosives were assembled to review the subscale test approach and provide options to NASA. Upon deliberations regarding the various options, the team arrived at some preliminary recommendations for NASA.

Standard spacecraft economic analysis. Volume 2: Findings and conclusions

NASA Technical Reports Server (NTRS)

Harris, E. D.; Large, J. P.

1976-01-01

The comparative program costs associated with use of various standardized spacecraft for Air Force space test program missions to be flown on the space shuttle were studied in two phases. In the first phase, a variety of procurement mixes composed of existing or programmed NASA standard spacecraft designs and an Air Force standard spacecraft design were considered. The second phase dealt with additional procurement options using an upgraded version of an existing NASA design. The results of both phases are discussed.

Epic Allies: Development of a Gaming App to Improve Antiretroviral Therapy Adherence Among Young HIV-Positive Men Who Have Sex With Men.

PubMed

LeGrand, Sara; Muessig, Kathryn Elizabeth; McNulty, Tobias; Soni, Karina; Knudtson, Kelly; Lemann, Alex; Nwoko, Nkechinyere; Hightow-Weidman, Lisa B

2016-05-13

In the United States, the human immunodeficiency virus (HIV) disproportionately affects young men who have sex with men (YMSM). For HIV-positive individuals, adherence to antiretroviral therapy (ART) is critical for achieving optimal health outcomes and reducing secondary transmission of HIV. However, YMSM often struggle with ART adherence. Novel mobile phone apps that incorporate game-based mechanics and social networking elements represent a promising intervention approach for improving ART adherence among YMSM. This study used a multiphase, iterative development process to create an ART adherence app for YMSM. The three-phase development process included: (1) theory-based concept development jointly by public health researchers and the technology team, (2) assessment of the target population's ART adherence needs and app preferences and development and testing of a clickable app prototype, and (3) development and usability testing of the final app prototype. The initial theory-based app concept developed in Phase One included medication reminders, daily ART adherence tracking and visualization, ART educational modules, limited virtual interactions with other app users, and gamification elements. In Phase Two, adherence needs, including those related to information, motivation, and behavioral skills, were identified. Participants expressed preferences for an ART adherence app that was informational, interactive, social, and customizable. Based on the findings from Phase Two, additional gaming features were added in Phase Three, including an interactive battle, superhero app theme, and app storyline. Other features were modified to increase interactivity and customization options and integrate the game theme. During usability testing of the final prototype, participants were able to understand and navigate the app successfully and rated the app favorably. An iterative development process was critical for the development of an ART adherence game app that was viewed as highly acceptable, relevant, and useful by YMSM.

Epic Allies: Development of a Gaming App to Improve Antiretroviral Therapy Adherence Among Young HIV-Positive Men Who Have Sex With Men

PubMed Central

Muessig, Kathryn Elizabeth; McNulty, Tobias; Soni, Karina; Knudtson, Kelly; Lemann, Alex; Nwoko, Nkechinyere; Hightow-Weidman, Lisa B

2016-01-01

Background In the United States, the human immunodeficiency virus (HIV) disproportionately affects young men who have sex with men (YMSM). For HIV-positive individuals, adherence to antiretroviral therapy (ART) is critical for achieving optimal health outcomes and reducing secondary transmission of HIV. However, YMSM often struggle with ART adherence. Novel mobile phone apps that incorporate game-based mechanics and social networking elements represent a promising intervention approach for improving ART adherence among YMSM. Objective This study used a multiphase, iterative development process to create an ART adherence app for YMSM. Methods The three-phase development process included: (1) theory-based concept development jointly by public health researchers and the technology team, (2) assessment of the target population’s ART adherence needs and app preferences and development and testing of a clickable app prototype, and (3) development and usability testing of the final app prototype. Results The initial theory-based app concept developed in Phase One included medication reminders, daily ART adherence tracking and visualization, ART educational modules, limited virtual interactions with other app users, and gamification elements. In Phase Two, adherence needs, including those related to information, motivation, and behavioral skills, were identified. Participants expressed preferences for an ART adherence app that was informational, interactive, social, and customizable. Based on the findings from Phase Two, additional gaming features were added in Phase Three, including an interactive battle, superhero app theme, and app storyline. Other features were modified to increase interactivity and customization options and integrate the game theme. During usability testing of the final prototype, participants were able to understand and navigate the app successfully and rated the app favorably. Conclusions An iterative development process was critical for the development of an ART adherence game app that was viewed as highly acceptable, relevant, and useful by YMSM. PMID:27178752

Early dialogue with health technology assessment bodies: a European perspective.

PubMed

Cuche, Matthieu; Beckerman, Rachel; Chowdhury, Cyrus A; van Weelden, Marije A

2014-12-01

Evidence requirements may differ across HTA bodies, and so pharmaceutical companies must plan to synergize their evidence generation strategy, across global regulatory and HTA bodies. Until recently, companies had no official platform to discuss the clinical development of a drug with HTA bodies; however, this is changing. To achieve broad usage in the EU, products must achieve both regulatory and reimbursement approval, the latter of which is based on HTA appraisal in many markets. The objective of this study is to present and evaluate the different options available for early HTA consultation (during drug development/Phase III) in the major European markets from the industry perspective. An exploratory (nonsystematic) literature review was performed to identify the European markets offering early HTA consultations, and each process was analyzed using a set of predefined metrics that are relevant to industry (the ability to consult with the regulatory body in parallel, consultation fees, length of consultation meeting, language of consultation meeting, maximum number of pharmaceutical company employees attending, procedural timelines, nature of data for which consultative advice can be sought, the output of the process, and the ability to involve external experts). Four different types of early HTA consultation processes were identified across the major European HTA markets. The nature of these processes varied in terms of the types and number of questions that can be addressed, the length of the meeting, the reporting output, and the ability to involve external experts. The availability of various options for early HTA consultation may help to avoid a mismatch between the evidence generated by means of a product's clinical development program, and the evidence expected by HTA bodies and payers, which can facilitate the pricing and reimbursement process upon a product's market authorization.

A feasibility study of municipal solid waste incineration fly ash utilisation in Estonia.

PubMed

Berber, Hakan; Frey, Ruedi; Voronova, Viktoria; Koroljova, Arina

2017-09-01

The purpose of this paper is to discuss the alternative environmental management options for the utilisation of municipal solid waste (MSW) incineration fly ash (FA), which is generated at Iru Power Plant where MSW is incinerated in Estonia. To determine sustainable and economically feasible environmental management options for MSW incineration FA in Estonia, CO 2 sequestration with a further carbonation process was examined. A partial Cost & Benefit Analysis has been conducted to compare the carbonation process to the current situation. Two carbonation options were developed. Option 1 is to use carbonated FA in any other processes based on the waste-to-product principle. Option 2 is to send carbonated FA to the non-hazardous landfill in Tallinn, Estonia. Important parameters, such as Net Present Value (NPV), Internal Rate of Return (IRR), Benefit-Cost Ratio (BCR) and Break Even Point (BEP), have been calculated for carbonation options and the current case. In addition, a sensitivity analysis has been conducted to examine its robustness. The results showed that the best option is carbonation Option 1 with NPV of 9,209,662 EUR, IRR of 43%, BCR of 2.63 and BEP between 2018 and 2019. Both Options 1 and 2 constitute more sustainable and environmentally friendly management options compared to the current situation. It can be concluded that this preliminary feasibility study showed that running a carbonation plant may be profitable and sustainable for Estonia. Currently, there is no treatment technology for MSW incineration FA in Estonia and FA is sent to a neighbouring country for further utilisation. This is the first study to demonstrate FA management options with economic and environmental benefits.

77 FR 10026 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

...-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing of a Proposed Rule Change Related to Stock-Option Processing February 14, 2012. Pursuant to Section 19(b)(1) of the... on February 7, 2012, the Chicago Board Options Exchange, Incorporated (``Exchange'' or ``CBOE...

77 FR 53241 - Self-Regulatory Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

... Organizations; Options Clearing Corporation; Order Approving Proposed Rule Change Relating to the Auction Process Under Options Clearing Corporation Rule 1104 August 27, 2012. I. Introduction On July 3, 2012, the Options Clearing Corporation (``OCC'') filed with the Securities and Exchange Commission (``Commission...

Ultrasonic simulation—Imagine3D and SimScan: Tools to solve the inverse problem for complex turbine components

NASA Astrophysics Data System (ADS)

Mair, H. D.; Ciorau, P.; Owen, D.; Hazelton, T.; Dunning, G.

2000-05-01

Two ultrasonic simulation packages: Imagine 3D and SIMSCAN have specifically been developed to solve the inverse problem for blade root and rotor steeple of low-pressure turbine. The software was integrated with the 3D drawing of the inspected parts, and with the dimensions of linear phased-array probes. SIMSCAN simulates the inspection scenario in both optional conditions: defect location and probe movement/refracted angle range. The results are displayed into Imagine 3-D, with a variety of options: rendering, display 1:1, grid, generated UT beam. The results are very useful for procedure developer, training and to optimize the phased-array probe inspection sequence. A spreadsheet is generated to correlate the defect coordinates with UT data (probe position, skew and refracted angle, UT path, and probe movement). The simulation models were validated during experimental work with phased-array systems. The accuracy in probe position is ±1 mm, and the refracted/skew angle is within ±0.5°. Representative examples of phased array focal laws/probe movement for a specific defect location, are also included.

A Qualitative Study of the Communication Process for Medical Acupuncture in Family Medicine.

PubMed

Ledford, Christy J W; Fisher, Carla L; Crawford, Paul

2018-05-01

As evidence establishes the efficacy of medical acupuncture, more family physicians and family medicine residents may receive medical acupuncture training and need to know how to effectively communicate about the treatment option with patients. By identifying how physicians talk about acupuncture treatment with their patients, we aimed to develop a model for physician training that could enhance their ability to integrate and practice medical acupuncture in conventional clinical settings. To capture the communication process that family physicians engage in when integrating acupuncture treatment into a clinical environment, we sought both physicians' and patients' perspectives. We conducted interviews with 17 family physicians and 15 patients in a US family medicine clinic that has integrated medical acupuncture into its practice. Audio recordings were transcribed and analyzed by two members of the study team in ATLAS.ti, using the constant comparative method. Integrating acupuncture into family medicine entailed a three-phase communication process: (1) introduce acupuncture, (2) explain the medical process, and (3) evaluate treatment outcomes. The emerging three-phase process of communicating acupuncture described here provides an initial model for teaching communication in the context of medical acupuncture. Given the exploratory nature of this initial study and the rarity of acupuncture treatment integrated into family medical settings, this is a first step in building knowledge in this realm of practice. Future research is needed to better understand the experience of patients who do not report notable results of acupuncture and to extend this study into other family medicine settings.

Asymmetric simple exclusion process on chains with a shortcut

NASA Astrophysics Data System (ADS)

Bunzarova, Nadezhda; Pesheva, Nina; Brankov, Jordan

2014-03-01

We consider the asymmetric simple exclusion process (TASEP) on an open network consisting of three consecutively coupled macroscopic chain segments with a shortcut between the tail of the first segment and the head of the third one. The model was introduced by Y.-M. Yuan et al. [J. Phys. A 40, 12351 (2007), 10.1088/1751-8113/40/41/006] to describe directed motion of molecular motors along twisted filaments. We report here unexpected results which revise the previous findings in the case of maximum current through the network. Our theoretical analysis, based on the effective rates' approximation, shows that the second (shunted) segment can exist in both low- and high-density phases, as well as in the coexistence (shock) phase. Numerical simulations demonstrate that the last option takes place in finite-size networks with head and tail chains of equal length, provided the injection and ejection rates at their external ends are equal and greater than one-half. Then the local density distribution and the nearest-neighbor correlations in the middle chain correspond to a shock phase with completely delocalized domain wall. Upon moving the shortcut to the head or tail of the network, the density profile takes a shape typical of a high- or low-density phase, respectively. Surprisingly, the main quantitative parameters of that shock phase are governed by a positive root of a cubic equation, the coefficients of which linearly depend on the probability of choosing the shortcut. Alternatively, they can be expressed in a universal way through the shortcut current. The unexpected conclusion is that a shortcut in the bulk of a single lane may create traffic jams.

INTEGRATED POWER GENERATION SYSTEMS FOR COAL MINE WASTE METHANE UTILIZATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peet M. Soot; Dale R. Jesse; Michael E. Smith

2005-08-01

An integrated system to utilize the waste coal mine methane (CMM) at the Federal No. 2 Coal Mine in West Virginia was designed and built. The system includes power generation, using internal combustion engines, along with gas processing equipment to upgrade sub-quality waste methane to pipeline quality standards. The power generation has a nominal capacity of 1,200 kw and the gas processing system can treat about 1 million cubic feet per day (1 MMCFD) of gas. The gas processing is based on the Northwest Fuel Development, Inc. (NW Fuel) proprietary continuous pressure swing adsorption (CPSA) process that can remove nitrogenmore » from CMM streams. The two major components of the integrated system are synergistic. The byproduct gas stream from the gas processing equipment can be used as fuel for the power generating equipment. In return, the power generating equipment provides the nominal power requirements of the gas processing equipment. This Phase III effort followed Phase I, which was comprised of a feasibility study for the project, and Phase II, where the final design for the commercial-scale demonstration was completed. The fact that NW Fuel is desirous of continuing to operate the equipment on a commercial basis provides the validation for having advanced the project through all of these phases. The limitation experienced by the project during Phase III was that the CMM available to operate the CPSA system on a commercial basis was not of sufficiently high quality. NW Fuel's CPSA process is limited in its applicability, requiring a relatively high quality of gas as the feed to the process. The CPSA process was demonstrated during Phase III for a limited time, during which the processing capabilities met the expected results, but the process was never capable of providing pipeline quality gas from the available low quality CMM. The NW Fuel CPSA process is a low-cost ''polishing unit'' capable of removing a few percent nitrogen. It was never intended to process CMM streams containing high levels of nitrogen, as is now the case at the Federal No.2 Mine. Even lacking the CPSA pipeline delivery demonstration, the project was successful in laying the groundwork for future commercial applications of the integrated system. This operation can still provide a guide for other coal mines which need options for utilization of their methane resources. The designed system can be used as a complete template, or individual components of the system can be segregated and utilized separately at other mines. The use of the CMM not only provides an energy fuel from an otherwise wasted resource, but it also yields an environmental benefit by reducing greenhouse gas emissions. The methane has twenty times the greenhouse effect as compared to carbon dioxide, which the combustion of the methane generates. The net greenhouse gas emission mitigation is substantial.« less

Kinetic study of dry anaerobic co-digestion of food waste and cardboard for methane production.

PubMed

Capson-Tojo, Gabriel; Rouez, Maxime; Crest, Marion; Trably, Eric; Steyer, Jean-Philippe; Bernet, Nicolas; Delgenès, Jean-Philippe; Escudié, Renaud

2017-11-01

Dry anaerobic digestion is a promising option for food waste treatment and valorization. However, accumulation of ammonia and volatile fatty acids often occurs, leading to inefficient processes and digestion failure. Co-digestion with cardboard may be a solution to overcome this problem. The effect of the initial substrate to inoculum ratio (0.25 to 1gVS·gVS -1 ) and the initial total solids contents (20-30%) on the kinetics and performance of dry food waste mono-digestion and co-digestion with cardboard was investigated in batch tests. All the conditions produced methane efficiently (71-93% of the biochemical methane potential). However, due to lack of methanogenic activity, volatile fatty acids accumulated at the beginning of the digestion and lag phases in the methane production were observed. At increasing substrate to inoculum ratios, the initial acid accumulation was more pronounced and lower cumulative methane yields were obtained. Higher amounts of soluble organic matter remained undegraded at higher substrate loads. Although causing slightly longer lag phases, high initial total solids contents did not jeopardize the methane yields. Cardboard addition reduced acid accumulation and the decline in the yields at increasing substrate loads. However, cardboard addition also caused higher concentrations of propionic acid, which appeared as the most last acid to be degraded. Nevertheless, dry co-digestion of food waste and cardboard in urban areas is demonstrated asan interesting feasible valorization option. Copyright © 2017 Elsevier Ltd. All rights reserved.

Upgrade of the ATLAS Tile Calorimeter Electronics

NASA Astrophysics Data System (ADS)

Moreno, Pablo; ATLAS Tile Calorimeter System

2016-04-01

The Tile Calorimeter (TileCal) is the hadronic calorimeter covering the central region of the ATLAS experiment at LHC. The TileCal readout consists of 9852 channels. The bulk of its upgrade will occur for the High Luminosity LHC phase (Phase II) where the peak luminosity will increase 5× compared to the design luminosity (1034 cm-2s-1) at center of mass energy of 14 TeV. The TileCal upgrade aims at replacing the majority of the on- and off-detector electronics to the extent that all calorimeter signals will be digitized and sent to the off-detector electronics in the counting room. To achieve the required reliability, redundancy has been introduced at different levels. Three different options are presently being investigated for the front-end electronic upgrade. Extensive test beam studies will determine which option will be selected. 10.24 Gbps optical links are used to read out all digitized data to the counting room while 4.8 Gbps down-links are used for synchronization, configuration and detector control. For the off-detector electronics a pre-processor (sROD) is being developed, which takes care of the initial trigger processing while temporarily storing the main data flow in pipeline and de-randomizer memories. Field Programmable Gate Arrays are extensively used for the logic functions off- and on-detector. One demonstrator prototype module with the new calorimeter module electronics, but still compatible with the present system, is planned to be inserted in ATLAS at the end of 2015.

Development and Testing of PRD-66 Hot Gas Filters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambers, J.A.; Garnier, J.E.; McMahon, T. J.

1996-12-31

The overall objective of this program is to develop and commercialize PRD-66 hot gas filters for application in pressurized fluidized bed combustors (PFBC) and Integrated Gas Combined Cycle (IGCC) power generation systems. The work is being carried out in phases with the following specific objectives: 1. Demonstrate acceptable mechanical, chemical, and filtration properties in exposure tests. 2. Produce and qualify selected prototype design filter elements in high temperature high pressure (HTHP) simulated PFBC exposure tests. 3. (Option) Generate a manufacturing plan to support commercial scale-up. 4. (Option) Recommend process equipment upgrades and produce 50 candle filters. Since the beginning ofmore » this program, a parallel evaluation of DuPont Lanxide Composites Inc. (DLC) PRD-66 hot gas candle filters took place using AEP`s TIDD PFBC facility. Several PRD-66 filters experienced damage during the final testing phase at TIDD, after highly successful testing in earlier runs. During the past year, DLC has undertaken a study under this contract to understand the mechanism of damage sustained in TIDD Test Segment 5. DLC has formulated a hypothesis for the damage mechanism based on the available evidence, and verified that the damage mechanism is possible given the conditions known to exist in TIDD. Improvements to the filter design to eliminate the root cause of the failure have been undertaken. This report details DLC`s conclusions regarding the failure mechanism, the evidence supporting the conclusions, and steps being taken to eliminate the root cause.« less

Innovative design and material solutions of thermal contact layers for high heat flux applications in fusion devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Federici, G.; Matera, R.; Chiocchio, S.

1994-11-01

One difficulty associated with the design and development of sacrificial plasma facing components that have to handle the high heat and particle fluxes in ITER is achieving the necessary contact conductance between the plasma protection material and the high-conductivity substrate in contact with the coolant. This paper presents a novel bond idea which is proposed as one of the options for the sacrificial energy dump targets located at the bottom of the divertor legs. The bonded joint in this design concept provides thermal and electrical contact between the armour and the cooled sub-structure while promoting remote, in-situ maintenance repair andmore » an easy replaceability of the armour part without disturbing the cooling pipes or rewelding neutron irradiated materials. To provide reliable and demountable adhesion, the bond consists of a metal alloy, treated in the semi-solid phase so that it leads to a fine dispersion of a globular solid phase into a liquid matrix (rheocast process). This thermal bond layer would normally operate in the solid state but could be brought reversibly to the semi-solid state during the armour replacement simply by heating it slightly above its solidus temperature. Material and design options are discussed in this paper. Possible methods of installation and removal are described, and lifetime considerations are addressed. In order to validate this concept within the ITER time-frame, a R&D programme must be rapidly implemented.« less

Assessment of two-phase flow on the chemical alteration and sealing of leakage pathways in cemented wellbores

DOE PAGES

Iyer, Jaisree; Walsh, Stuart D. C.; Hao, Yue; ...

2018-01-08

Wellbore leakage tops the list of perceived risks to the long-term geologic storage of CO 2, because wells provide a direct path between the CO 2 storage reservoir and the atmosphere. In this paper, we have coupled a two-phase flow model with our original framework that combined models for reactive transport of carbonated brine, geochemistry of reacting cement, and geomechanics to predict the permeability evolution of cement fractures. Additionally, this makes the framework suitable for field conditions in geological storage sites, permitting simulation of contact between cement and mixtures of brine and supercritical CO 2. Due to lack of conclusivemore » experimental data, we tried both linear and Corey relative permeability models to simulate flow of the two phases in cement fractures. The model also includes two options to account for the inconsistent experimental observations regarding cement reactivity with two-phase CO 2-brine mixtures. One option assumes that the reactive surface area is independent of the brine saturation and the second option assumes that the reactive surface area is proportional to the brine saturation. We have applied the model to predict the extent of cement alteration, the conditions under which fractures seal, the time it takes to seal a fracture, and the leakage rates of CO 2 and brine when damage zones in the wellbore are exposed to two-phase CO 2-brine mixtures. Initial brine residence time and the initial fracture aperture are critical parameters that affect the fracture sealing behavior. We also evaluated the importance of the model assumptions regarding relative permeability and cement reactivity. These results illustrate the need to understand how mixtures of carbon dioxide and brine flow through fractures and react with cement to make reasonable predictions regarding well integrity. For example, a reduction in the cement reactivity with two-phase CO 2-brine mixture can not only significantly increase the sealing time for fractures but may also prevent fracture sealing.« less

Assessment of two-phase flow on the chemical alteration and sealing of leakage pathways in cemented wellbores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iyer, Jaisree; Walsh, Stuart D. C.; Hao, Yue

Wellbore leakage tops the list of perceived risks to the long-term geologic storage of CO 2, because wells provide a direct path between the CO 2 storage reservoir and the atmosphere. In this paper, we have coupled a two-phase flow model with our original framework that combined models for reactive transport of carbonated brine, geochemistry of reacting cement, and geomechanics to predict the permeability evolution of cement fractures. Additionally, this makes the framework suitable for field conditions in geological storage sites, permitting simulation of contact between cement and mixtures of brine and supercritical CO 2. Due to lack of conclusivemore » experimental data, we tried both linear and Corey relative permeability models to simulate flow of the two phases in cement fractures. The model also includes two options to account for the inconsistent experimental observations regarding cement reactivity with two-phase CO 2-brine mixtures. One option assumes that the reactive surface area is independent of the brine saturation and the second option assumes that the reactive surface area is proportional to the brine saturation. We have applied the model to predict the extent of cement alteration, the conditions under which fractures seal, the time it takes to seal a fracture, and the leakage rates of CO 2 and brine when damage zones in the wellbore are exposed to two-phase CO 2-brine mixtures. Initial brine residence time and the initial fracture aperture are critical parameters that affect the fracture sealing behavior. We also evaluated the importance of the model assumptions regarding relative permeability and cement reactivity. These results illustrate the need to understand how mixtures of carbon dioxide and brine flow through fractures and react with cement to make reasonable predictions regarding well integrity. For example, a reduction in the cement reactivity with two-phase CO 2-brine mixture can not only significantly increase the sealing time for fractures but may also prevent fracture sealing.« less

California-Wyoming Grid Integration Study: Phase 1 -- Economic Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corbus, D.; Hurlbut, D.; Schwabe, P.

This study presents a comparative analysis of two different renewable energy options for the California energy market between 2017 and 2020: 12,000 GWh per year from new California in-state renewable energy resources; and 12,000 GWh per year from Wyoming wind delivered to the California marketplace. Either option would add to the California resources already existing or under construction, theoretically providing the last measure of power needed to meet (or to slightly exceed) the state's 33% renewable portfolio standard. Both options have discretely measurable differences in transmission costs, capital costs (due to the enabling of different generation portfolios), capacity values, andmore » production costs. The purpose of this study is to compare and contrast the two different options to provide additional insight for future planning.« less

Synthesis, Characterization and Cold Workability of Cast Copper-Magnesium-Tin Alloys

NASA Astrophysics Data System (ADS)

Bravo Bénard, Agustín Eduardo; Martínez Hernández, David; González Reyes, José Gonzalo; Ortiz Prado, Armando; Schouwenaars Franssens, Rafael

2014-02-01

The use of Mg as an alloying element in copper alloys has largely been overlooked in scientific literature and technological applications. Its supposed tribological compatibility with iron makes it an interesting option to replace Pb in tribological alloys. This work describes the casting process of high-quality thin slabs of Cu-Mg-Sn alloys with different compositions by means of conventional methods. The resulting phases were analyzed using X-ray diffraction, scanning electron microscopy, optical microscopy, and energy dispersive X-ray spectroscopy techniques. Typical dendritic α-Cu, eutectic Cu2Mg(Sn) and eutectoid non-equilibrium microstructures were found. Tensile tests and Vickers microhardness show the excellent hardening capability of Mg as compared to other copper alloys in the as-cast condition. For some of the slabs and compositions, cold rolling reductions of over 95 pct have been easily achieved. Other compositions and slabs have failed during the deformation process. Failure analysis after cold rolling reveals that one cause for brittleness is the presence of casting defects such as microshrinkage and inclusions, which can be eliminated. However, for high Mg contents, a high volume fraction of the intermetallic phase provides a contiguous path for crack propagation through the connected interdendritic regions.

Unified approach for extrapolation and bridging of adult information in early-phase dose-finding paediatric studies.

PubMed

Petit, Caroline; Samson, Adeline; Morita, Satoshi; Ursino, Moreno; Guedj, Jérémie; Jullien, Vincent; Comets, Emmanuelle; Zohar, Sarah

2018-06-01

The number of trials conducted and the number of patients per trial are typically small in paediatric clinical studies. This is due to ethical constraints and the complexity of the medical process for treating children. While incorporating prior knowledge from adults may be extremely valuable, this must be done carefully. In this paper, we propose a unified method for designing and analysing dose-finding trials in paediatrics, while bridging information from adults. The dose-range is calculated under three extrapolation options, linear, allometry and maturation adjustment, using adult pharmacokinetic data. To do this, it is assumed that target exposures are the same in both populations. The working model and prior distribution parameters of the dose-toxicity and dose-efficacy relationships are obtained using early-phase adult toxicity and efficacy data at several dose levels. Priors are integrated into the dose-finding process through Bayesian model selection or adaptive priors. This calibrates the model to adjust for misspecification, if the adult and pediatric data are very different. We performed a simulation study which indicates that incorporating prior adult information in this way may improve dose selection in children.

Dark chocolate or tomato extract for prehypertension: a randomised controlled trial.

PubMed

Ried, Karin; Frank, Oliver R; Stocks, Nigel P

2009-07-08

Flavanol-rich chocolate and lycopene-rich tomato extract have attracted interest as potential alternative treatment options for hypertension, a known risk factor for cardiovascular morbidity and mortality. Treatment of prehypertension (SBP 120-139/DBP 80-89 mmHg) may forestall progression to hypertension. However, there has been only limited research into non-pharmacological treatment options for prehypertension. We investigated the effect of dark chocolate or tomato extract on blood pressure, and their acceptability as an ongoing treatment option in a prehypertensive population. Our trial consisted of two phases: a randomised controlled three-group-parallel trial over 12 weeks (phase 1) followed by a crossover of the two active treatment arms over an additional 12-week period (phase 2). Group 1 received a 50 g daily dose of dark chocolate with 70% cocoa containing 750 mg polyphenols, group 2 were allocated one tomato extract capsule containing 15 mg lycopene per day, and group 3 received one placebo capsule daily over 8 weeks followed by a 4-week washout period. In phase 2 the active treatment groups were crossed over to receive the alternative treatment. Median blood pressure, weight, and abdominal circumference were measured 4-weekly, and other characteristics including physical activity, general health, energy, mood, and acceptability of treatment were assessed by questionnaire at 0, 8 and 20 weeks. We analysed changes over time using a linear mixed model, and one time point differences using Kruskal-Wallis, Fisher's-Exact, or t-tests. Thirty-six prehypertensive healthy adult volunteers completed the 6-month trial. Blood pressure changes over time within groups and between groups were not significant and independent of treatment. Weight and other characteristics did not change significantly during the trial. However, a marked difference in acceptability between the two treatment forms (chocolate or capsule) was revealed (p < 0.0001). Half of the participants allocated to the chocolate treatment found it hard to eat 50 g of dark chocolate every day and 20% considered it an unacceptable long-term treatment option, whereas all participants found it easy and acceptable to take a capsule each day for blood pressure. Our study did not find a blood pressure lowering effect of dark chocolate or tomato extract in a prehypertensive population. Practicability of chocolate as a long-term treatment option may be limited. http://www.anzctr.org.au Identifier: ACTRN12609000047291.

Dark chocolate or tomato extract for prehypertension: a randomised controlled trial

PubMed Central

Ried, Karin; Frank, Oliver R; Stocks, Nigel P

2009-01-01

Background Flavanol-rich chocolate and lycopene-rich tomato extract have attracted interest as potential alternative treatment options for hypertension, a known risk factor for cardiovascular morbidity and mortality. Treatment of prehypertension (SBP 120–139/DBP 80–89 mmHg) may forestall progression to hypertension. However, there has been only limited research into non-pharmacological treatment options for prehypertension. We investigated the effect of dark chocolate or tomato extract on blood pressure, and their acceptability as an ongoing treatment option in a prehypertensive population. Methods Our trial consisted of two phases: a randomised controlled three-group-parallel trial over 12 weeks (phase 1) followed by a crossover of the two active treatment arms over an additional 12-week period (phase 2). Group 1 received a 50 g daily dose of dark chocolate with 70% cocoa containing 750 mg polyphenols, group 2 were allocated one tomato extract capsule containing 15 mg lycopene per day, and group 3 received one placebo capsule daily over 8 weeks followed by a 4-week washout period. In phase 2 the active treatment groups were crossed over to receive the alternative treatment. Median blood pressure, weight, and abdominal circumference were measured 4-weekly, and other characteristics including physical activity, general health, energy, mood, and acceptability of treatment were assessed by questionnaire at 0, 8 and 20 weeks. We analysed changes over time using a linear mixed model, and one time point differences using Kruskal-Wallis, Fisher's-Exact, or t-tests. Results Thirty-six prehypertensive healthy adult volunteers completed the 6-month trial. Blood pressure changes over time within groups and between groups were not significant and independent of treatment. Weight and other characteristics did not change significantly during the trial. However, a marked difference in acceptability between the two treatment forms (chocolate or capsule) was revealed (p < 0.0001). Half of the participants allocated to the chocolate treatment found it hard to eat 50 g of dark chocolate every day and 20% considered it an unacceptable long-term treatment option, whereas all participants found it easy and acceptable to take a capsule each day for blood pressure. Conclusion Our study did not find a blood pressure lowering effect of dark chocolate or tomato extract in a prehypertensive population. Practicability of chocolate as a long-term treatment option may be limited. Trial registration Identifier: ACTRN12609000047291 PMID:19583878

Oscillatory Reduction in Option Pricing Formula Using Shifted Poisson and Linear Approximation

NASA Astrophysics Data System (ADS)

Nur Rachmawati, Ro'fah; Irene; Budiharto, Widodo

2014-03-01

Option is one of derivative instruments that can help investors improve their expected return and minimize the risks. However, the Black-Scholes formula is generally used in determining the price of the option does not involve skewness factor and it is difficult to apply in computing process because it produces oscillation for the skewness values close to zero. In this paper, we construct option pricing formula that involve skewness by modified Black-Scholes formula using Shifted Poisson model and transformed it into the form of a Linear Approximation in the complete market to reduce the oscillation. The results are Linear Approximation formula can predict the price of an option with very accurate and successfully reduce the oscillations in the calculation processes.

Option Fixation: A Cognitive Contributor to Overconfidence

ERIC Educational Resources Information Center

Sieck, Winston R.; Merkle, Edgar C.; Van Zandt, Trisha

2007-01-01

The ASC model of choice and confidence in general knowledge proposes that respondents first Assess the familiarity of presented options, and then use the high-familiarity option as a retrieval cue to Search memory for the purposes of Constructing an explanation about why that high-familiarity option is true. The ASC process implies that…

77 FR 42784 - Self-Regulatory Organizations; Options Clearing Corporation; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... Organizations; Options Clearing Corporation; Notice of Filing of Proposed Rule Change Relating to the Auction Process Under Options Clearing Corporation Rule 1104 July 16, 2012. Pursuant to Section 19(b)(1) of the... July 3, 2012, The Options Clearing Corporation (``OCC'') filed with the Securities and Exchange...

78 FR 26413 - Self-Regulatory Organizations; The Options Clearing Corporation; Notice of Filing of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... Contracts from Saturday to Friday night. Eliminating Saturday expirations will allow OCC to streamline the... expiration date for Standard Expiration Contracts is moved to Friday night, expiration processing for standard options, quarterly options, and weekly options will all occur on the same day and will be a single...

Conversion Coatings for Aluminum Alloys by Chemical Vapor Deposition Mechanisms

NASA Technical Reports Server (NTRS)

Reye, John T.; McFadden, Lisa S.; Gatica, Jorge E.; Morales, Wilfredo

2004-01-01

With the rise of environmental awareness and the renewed importance of environmentally friendly processes, the United States Environmental Protection Agency has targeted surface pre-treatment processes based on chromates. Indeed, this process has been subject to regulations under the Clean Water Act as well as other environmental initiatives, and there is today a marked movement to phase the process out in the near future. Therefore, there is a clear need for new advances in coating technology that could provide practical options for replacing present industrial practices. Depending on the final application, such coatings might be required to be resistant to corrosion, act as chemically resistant coatings, or both. This research examined a chemical vapor deposition (CVD) mechanism to deposit uniform conversion coatings onto aluminum alloy substrates. Robust protocols based on solutions of aryl phosphate ester and multi-oxide conversion coating (submicron) films were successfully grown onto the aluminum alloy samples. These films were characterized by X-ray Photoelectron Spectroscopy (XPS). Preliminary results indicate the potential of this technology to replace aqueous-based chromate processes.

Assessment of Options for the Treatment of Nitrate Salt Wastes at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Bruce Alan; Funk, David John; Stevens, Patrice Ann

2016-03-17

This paper summarizes the methodology used to evaluate options for treatment of the remediated nitrate salt waste containers at Los Alamos National Laboratory. The method selected must enable treatment of the waste drums, which consist of a mixture of complex nitrate salts (oxidizer) improperly mixed with sWheat Scoop®1, an organic kitty litter and absorbent (fuel), in a manner that renders the waste safe, meets the specifications of waste acceptance criteria, and is suitable for transport and final disposal in the Waste Isolation Pilot Plant located in Carlsbad, New Mexico. A Core Remediation Team was responsible for comprehensively reviewing the options,more » ensuring a robust, defensible treatment recommendation. The evaluation process consisted of two steps. First, a prescreening process was conducted to cull the list on the basis for a decision of feasibility of certain potential options with respect to the criteria. Then, the remaining potential options were evaluated and ranked against each of the criteria in a consistent methodology. Numerical scores were established by consensus of the review team. Finally, recommendations were developed based on current information and understanding of the scientific, technical, and regulatory situation. A discussion of the preferred options and documentation of the process used to reach the recommended treatment options are presented.« less

Assessing Window Replacement Options | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Waste heat recovery options in a large gas-turbine combined power plant

NASA Astrophysics Data System (ADS)

Upathumchard, Ularee

This study focuses on power plant heat loss and how to utilize the waste heat in energy recovery systems in order to increase the overall power plant efficiency. The case study of this research is a 700-MW natural gas combined cycle power plant, located in a suburban area of Thailand. An analysis of the heat loss of the combustion process, power generation process, lubrication system, and cooling system has been conducted to evaluate waste heat recovery options. The design of the waste heat recovery options depends to the amount of heat loss from each system and its temperature. Feasible waste heat sources are combustion turbine (CT) room ventilation air and lubrication oil return from the power plant. The following options are being considered in this research: absorption chillers for cooling with working fluids Ammonia-Water and Water-Lithium Bromide (in comparison) and Organic Rankine Cycle (ORC) with working fluids R134a and R245fa. The absorption cycles are modeled in three different stages; single-effect, double-effect and half-effect. ORC models used are simple ORC as a baseline, ORC with internal regenerator, ORC two-phase flash expansion ORC and ORC with multiple heat sources. Thermodynamic models are generated and each system is simulated using Engineering Equation Solver (EES) to define the most suitable waste heat recovery options for the power plant. The result will be synthesized and evaluated with respect to exergy utilization efficiency referred as the Second Law effectiveness and net output capacity. Results of the models give recommendation to install a baseline ORC of R134a and a double-effect water-lithium bromide absorption chiller, driven by ventilation air from combustion turbine compartment. The two technologies yield reasonable economic payback periods of 4.6 years and 0.7 years, respectively. The fact that this selected power plant is in its early stage of operation allows both models to economically and effectively perform waste heat recovery during the power plant's life span. Furthermore, the recommendation from this research will be submitted to the Electricity Generating Authority of Thailand (EGAT) for implementation. This study will also be used as an example for other power plants in Thailand to consider waste energy utilization to improve plant efficiency and sustain fuel resources in the future.

40 CFR 63.138 - Process wastewater provisions-performance standards for treatment processes managing Group 1...

Code of Federal Regulations, 2012 CFR

2012-07-01

... each treatment process. (b) Control options: Group 1 wastewater streams for Table 9 compounds. The... section. (c) Control options: Group 1 wastewater streams for Table 8 compounds. The owner or operator...) Residuals. For each residual removed from a Group 1 wastewater stream, the owner or operator shall control...

40 CFR 63.138 - Process wastewater provisions-performance standards for treatment processes managing Group 1...

Code of Federal Regulations, 2013 CFR

2013-07-01

... each treatment process. (b) Control options: Group 1 wastewater streams for Table 9 compounds. The... section. (c) Control options: Group 1 wastewater streams for Table 8 compounds. The owner or operator...) Residuals. For each residual removed from a Group 1 wastewater stream, the owner or operator shall control...

40 CFR 63.138 - Process wastewater provisions-performance standards for treatment processes managing Group 1...

Code of Federal Regulations, 2011 CFR

2011-07-01

... each treatment process. (b) Control options: Group 1 wastewater streams for Table 9 compounds. The... section. (c) Control options: Group 1 wastewater streams for Table 8 compounds. The owner or operator...) Residuals. For each residual removed from a Group 1 wastewater stream, the owner or operator shall control...

Decision processes in choice overload: a product of delay and probability discounting?

PubMed

Kaplan, Brent A; Reed, Derek D

2013-07-01

Recent research in the behavioral decision making literature has demonstrated that humans hyperbolically discount the subjective value of options as the number of options increases (Reed et al., 2012). These findings provide a cognitive-behavioral synthesis of the "choice overload" phenomenon, also known as the "paradox of choice." Specifically, these findings suggest that temporal discounting may serve as the underlying process contributing to this effect. As an extension, this study examined the effects of reward magnitude sizes had on rates temporal and options discounting. This manipulation was conducted to determine what role temporal discounting plays in discounting of options. The present results suggest that temporal discounting may not be the only process contributing to the choice overload effect. Copyright © 2013 Elsevier B.V. All rights reserved.

Pricing foreign equity option with stochastic volatility

NASA Astrophysics Data System (ADS)

Sun, Qi; Xu, Weidong

2015-11-01

In this paper we propose a general foreign equity option pricing framework that unifies the vast foreign equity option pricing literature and incorporates the stochastic volatility into foreign equity option pricing. Under our framework, the time-changed Lévy processes are used to model the underlying assets price of foreign equity option and the closed form pricing formula is obtained through the use of characteristic function methodology. Numerical tests indicate that stochastic volatility has a dramatic effect on the foreign equity option prices.

Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

PubMed Central

Klein, Thomas; Clemens, Helmut; Mayer, Svea

2016-01-01

Advanced intermetallic alloys based on the γ-TiAl phase have become widely regarded as most promising candidates to replace heavier Ni-base superalloys as materials for high-temperature structural components, due to their facilitating properties of high creep and oxidation resistance in combination with a low density. Particularly, recently developed alloying concepts based on a β-solidification pathway, such as the so-called TNM alloy, which are already incorporated in aircraft engines, have emerged offering the advantage of being processible using near-conventional methods and the option to attain balanced mechanical properties via subsequent heat-treatment. Development trends for the improvement of alloying concepts, especially dealing with issues regarding alloying element distribution, nano-scale phase characterization, phase stability, and phase formation mechanisms demand the utilization of high-resolution techniques, mainly due to the multi-phase nature of advanced TiAl alloys. Atom probe tomography (APT) offers unique possibilities of characterizing chemical compositions with a high spatial resolution and has, therefore, been widely used in recent years with the aim of understanding the materials constitution and appearing basic phenomena on the atomic scale and applying these findings to alloy development. This review, thus, aims at summarizing scientific works regarding the application of atom probe tomography towards the understanding and further development of intermetallic TiAl alloys. PMID:28773880

Transmutation of All German Transuranium under Nuclear Phase Out Conditions – Is This Feasible from Neutronic Point of View?

PubMed Central

Merk, Bruno; Litskevich, Dzianis

2015-01-01

The German government has decided for the nuclear phase out, but a decision on a strategy for the management of the highly radioactive waste is not defined yet. Partitioning and Transmutation (P&T) could be considered as a technological option for the management of highly radioactive waste, therefore a wide study has been conducted. In the study group objectives for P&T and the boundary conditions of the phase out have been discussed. The fulfillment of the given objectives is analyzed from neutronics point of view using simulations of a molten salt reactor with fast neutron spectrum. It is shown that the efficient transmutation of all existing transuranium isotopes would be possible from neutronic point of view in a time frame of about 60 years. For this task three reactors of a mostly new technology would have to be developed and a twofold life cycle consisting of a transmuter operation and a deep burn phase would be required. A basic insight for the optimization of the time duration of the deep burn phase is given. Further on, a detailed balance of different isotopic inventories is given to allow a deeper understanding of the processes during transmutation in the molten salt fast reactor. The effect of modeling and simulation is investigated based on three different modeling strategies and two different code versions. PMID:26717509

Transmutation of All German Transuranium under Nuclear Phase Out Conditions - Is This Feasible from Neutronic Point of View?

PubMed

Merk, Bruno; Litskevich, Dzianis

2015-01-01

The German government has decided for the nuclear phase out, but a decision on a strategy for the management of the highly radioactive waste is not defined yet. Partitioning and Transmutation (P&T) could be considered as a technological option for the management of highly radioactive waste, therefore a wide study has been conducted. In the study group objectives for P&T and the boundary conditions of the phase out have been discussed. The fulfillment of the given objectives is analyzed from neutronics point of view using simulations of a molten salt reactor with fast neutron spectrum. It is shown that the efficient transmutation of all existing transuranium isotopes would be possible from neutronic point of view in a time frame of about 60 years. For this task three reactors of a mostly new technology would have to be developed and a twofold life cycle consisting of a transmuter operation and a deep burn phase would be required. A basic insight for the optimization of the time duration of the deep burn phase is given. Further on, a detailed balance of different isotopic inventories is given to allow a deeper understanding of the processes during transmutation in the molten salt fast reactor. The effect of modeling and simulation is investigated based on three different modeling strategies and two different code versions.

Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography.

PubMed

Klein, Thomas; Clemens, Helmut; Mayer, Svea

2016-09-06

Advanced intermetallic alloys based on the γ-TiAl phase have become widely regarded as most promising candidates to replace heavier Ni-base superalloys as materials for high-temperature structural components, due to their facilitating properties of high creep and oxidation resistance in combination with a low density. Particularly, recently developed alloying concepts based on a β-solidification pathway, such as the so-called TNM alloy, which are already incorporated in aircraft engines, have emerged offering the advantage of being processible using near-conventional methods and the option to attain balanced mechanical properties via subsequent heat-treatment. Development trends for the improvement of alloying concepts, especially dealing with issues regarding alloying element distribution, nano-scale phase characterization, phase stability, and phase formation mechanisms demand the utilization of high-resolution techniques, mainly due to the multi-phase nature of advanced TiAl alloys. Atom probe tomography (APT) offers unique possibilities of characterizing chemical compositions with a high spatial resolution and has, therefore, been widely used in recent years with the aim of understanding the materials constitution and appearing basic phenomena on the atomic scale and applying these findings to alloy development. This review, thus, aims at summarizing scientific works regarding the application of atom probe tomography towards the understanding and further development of intermetallic TiAl alloys.

Biological groundwater denitrification systems: Lab-scale trials aimed at nitrous oxide production and emission assessment.

PubMed

Capodici, Marco; Avona, Alessia; Laudicina, Vito Armando; Viviani, Gaspare

2018-07-15

Bio-trenches are a sustainable option for treating nitrate contamination in groundwater. However, a possible side effect of this technology is the production of nitrous oxide, a greenhouse gas that can be found both dissolved in the liquid effluent as well as emitted as off gas. The aim of this study was to analyze NO 3 - removal and N 2 O production in lab-scale column trials. The column contained olive nut as organic carbon media. The experimental study was divided into three phases (I, II and III) each characterized by different inlet NO 3 - concentrations (30, 50, 75mgNO 3 -NL -1 respectively). Sampling ports deployed along the length of the column allowed to observe the denitrification process as well as the formation and consumption of intermediate products, such as nitrite (NO 2 - ) and nitrous oxide (N 2 O). In particular, it was observed that N 2 O production represent only a small fraction of removed NO 3 - during Phase I and II, both for dissolved (0.007%) and emitted (0.003%) phase, and it was recorded a high denitrification efficiency, over 99%. Nevertheless, significantly higher values were recorded for Phase 3 concerning emitted phase (0.018%). This fact is due to increased inlet concentration which resulted in a carbon limitation and in a consequent decrease in denitrification efficiency (76%). Copyright © 2018 Elsevier B.V. All rights reserved.

Safety, Efficacy, and Patient Acceptability of Everolimus in the Treatment of Breast Cancer.

PubMed

Lousberg, Laurence; Jerusalem, Guy

2016-01-01

Everolimus combined with exemestane is an important treatment option for patients suffering from estrogen receptor-positive, human epidermal growth factor receptor 2-negative, advanced breast cancer (ABC) who have been previously treated with a nonsteroidal aromatase inhibitor (NSAI). After presentation of phase III registration trial BOLERO-2, several phase IIIb trials have been started to evaluate this regimen in a more real-world setting. Here, we review the efficacy and safety data published or presented at selected international meetings. These studies confirmed the outcome observed in the BOLERO-2 trial. Patient acceptance rate is also discussed by focusing on the permanent everolimus discontinuation rate in these trials. Factors influencing the safety profile are also reported, including the impact of age. The optimal sequence of combined therapy approaches associating targeted and endocrine therapy (ET) has yet to be determined as new treatment options such as cyclin-dependent kinase inhibitors become available. However, everolimus-exemestane remains an important treatment option with a major impact on progression-free survival (PFS) and an acceptable safety profile.

Safety, Efficacy, and Patient Acceptability of Everolimus in the Treatment of Breast Cancer

PubMed Central

Lousberg, Laurence; Jerusalem, Guy

2016-01-01

Everolimus combined with exemestane is an important treatment option for patients suffering from estrogen receptor-positive, human epidermal growth factor receptor 2-negative, advanced breast cancer (ABC) who have been previously treated with a nonsteroidal aromatase inhibitor (NSAI). After presentation of phase III registration trial BOLERO-2, several phase IIIb trials have been started to evaluate this regimen in a more real-world setting. Here, we review the efficacy and safety data published or presented at selected international meetings. These studies confirmed the outcome observed in the BOLERO-2 trial. Patient acceptance rate is also discussed by focusing on the permanent everolimus discontinuation rate in these trials. Factors influencing the safety profile are also reported, including the impact of age. The optimal sequence of combined therapy approaches associating targeted and endocrine therapy (ET) has yet to be determined as new treatment options such as cyclin-dependent kinase inhibitors become available. However, everolimus–exemestane remains an important treatment option with a major impact on progression-free survival (PFS) and an acceptable safety profile. PMID:28096680

A structured multi-stakeholder learning process for Sustainable Land Management.

PubMed

Schwilch, Gudrun; Bachmann, Felicitas; Valente, Sandra; Coelho, Celeste; Moreira, Jorge; Laouina, Abdellah; Chaker, Miloud; Aderghal, Mohamed; Santos, Patricia; Reed, Mark S

2012-09-30

There are many, often competing, options for Sustainable Land Management (SLM). Each must be assessed - and sometimes negotiated - prior to implementation. Participatory, multi-stakeholder approaches to identification and selection of SLM options are increasingly popular, often motivated by social learning and empowerment goals. Yet there are few practical tools for facilitating processes in which land managers may share, select, and decide on the most appropriate SLM options. The research presented here aims to close the gap between the theory and the practice of stakeholder participation/learning in SLM decision-making processes. The paper describes a three-part participatory methodology for selecting SLM options that was tested in 14 desertification-prone study sites within the EU-DESIRE project. Cross-site analysis and in-depth evaluation of the Moroccan and Portuguese sites were used to evaluate how well the proposed process facilitated stakeholder learning and selection of appropriate SLM options for local implementation. The structured nature of the process - starting with SLM goal setting - was found to facilitate mutual understanding and collaboration between stakeholders. The deliberation process led to a high degree of consensus over the outcome and, though not an initial aim, it fostered social learning in many cases. This solution-oriented methodology is applicable in a wide range of contexts and may be implemented with limited time and resources. Copyright © 2012 Elsevier Ltd. All rights reserved.

Performance monitoring for new phase dynamic optimization of instruction dispatch cluster configuration

DOEpatents

Balasubramonian, Rajeev [Sandy, UT; Dwarkadas, Sandhya [Rochester, NY; Albonesi, David [Ithaca, NY

2012-01-24

In a processor having multiple clusters which operate in parallel, the number of clusters in use can be varied dynamically. At the start of each program phase, the configuration option for an interval is run to determine the optimal configuration, which is used until the next phase change is detected. The optimum instruction interval is determined by starting with a minimum interval and doubling it until a low stability factor is reached.

Intervention strategies for carcass disposal: pareto analysis of exposures for exotic disease outbreaks.

PubMed

Delgado, João; Longhurst, Phil; Hickman, Gordon A W; Gauntlett, Daniel M; Howson, Simon F; Irving, Phil; Hart, Alwyn; Pollard, Simon J T

2010-06-15

An enhanced methodology for the policy-level prioritization of intervention options during carcass disposal is presented. Pareto charts provide a semiquantitative analysis of opportunities for multiple exposures to human health, animal health, and the wider environment during carcass disposal; they identify critical control points for risk management and assist in waste technology assessment. Eighty percent of the total availability of more than 1300 potential exposures to human, animal, or environmental receptors is represented by 16 processes, these being dominated by on-farm collection and carcass processing, reinforcing the criticality of effective controls during early stages of animal culling and waste processing. Exposures during mass burials are dominated by ground- and surface-water exposures with noise and odor nuisance prevalent for mass pyres, consistent with U.K. experience. Pareto charts are discussed in the context of other visualization formats for policy officials and promoted as a communication tool for informing the site-specific risk assessments required during the operational phases of exotic disease outbreaks.

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

Sequential and simultaneous choices: testing the diet selection and sequential choice models.

PubMed

Freidin, Esteban; Aw, Justine; Kacelnik, Alex

2009-03-01

We investigate simultaneous and sequential choices in starlings, using Charnov's Diet Choice Model (DCM) and Shapiro, Siller and Kacelnik's Sequential Choice Model (SCM) to integrate function and mechanism. During a training phase, starlings encountered one food-related option per trial (A, B or R) in random sequence and with equal probability. A and B delivered food rewards after programmed delays (shorter for A), while R ('rejection') moved directly to the next trial without reward. In this phase we measured latencies to respond. In a later, choice, phase, birds encountered the pairs A-B, A-R and B-R, the first implementing a simultaneous choice and the second and third sequential choices. The DCM predicts when R should be chosen to maximize intake rate, and SCM uses latencies of the training phase to predict choices between any pair of options in the choice phase. The predictions of both models coincided, and both successfully predicted the birds' preferences. The DCM does not deal with partial preferences, while the SCM does, and experimental results were strongly correlated to this model's predictions. We believe that the SCM may expose a very general mechanism of animal choice, and that its wider domain of success reflects the greater ecological significance of sequential over simultaneous choices.

ARC-VM: An architecture real options complexity-based valuation methodology for military systems-of-systems acquisitions

NASA Astrophysics Data System (ADS)

Domercant, Jean Charles

The combination of today's national security environment and mandated acquisition policies makes it necessary for military systems to interoperate with each other to greater degrees. This growing interdependency results in complex Systems-of-Systems (SoS) that only continue to grow in complexity to meet evolving capability needs. Thus, timely and affordable acquisition becomes more difficult, especially in the face of mounting budgetary pressures. To counter this, architecting principles must be applied to SoS design. The research objective is to develop an Architecture Real Options Complexity-Based Valuation Methodology (ARC-VM) suitable for acquisition-level decision making, where there is a stated desire for more informed tradeoffs between cost, schedule, and performance during the early phases of design. First, a framework is introduced to measure architecture complexity as it directly relates to military SoS. Development of the framework draws upon a diverse set of disciplines, including Complexity Science, software architecting, measurement theory, and utility theory. Next, a Real Options based valuation strategy is developed using techniques established for financial stock options that have recently been adapted for use in business and engineering decisions. The derived complexity measure provides architects with an objective measure of complexity that focuses on relevant complex system attributes. These attributes are related to the organization and distribution of SoS functionality and the sharing and processing of resources. The use of Real Options provides the necessary conceptual and visual framework to quantifiably and traceably combine measured architecture complexity, time-valued performance levels, as well as programmatic risks and uncertainties. An example suppression of enemy air defenses (SEAD) capability demonstrates the development and usefulness of the resulting architecture complexity & Real Options based valuation methodology. Different portfolios of candidate system types are used to generate an array of architecture alternatives that are then evaluated using an engagement model. This performance data is combined with both measured architecture complexity and programmatic data to assign an acquisition value to each alternative. This proves useful when selecting alternatives most likely to meet current and future capability needs.

Development and 10-year history of a biosimilar: the example of Binocrit®

PubMed Central

Aapro, Matti; Krendyukov, Andriy; Höbel, Nadja; Seidl, Andreas; Gascón, Pere

2018-01-01

Patent expirations for several biological products have prompted the development of alternative versions, termed ‘biosimilars’, which have comparable quality, safety and efficacy to a licensed biological medicine (also referred to as the ‘reference’ medicine). The first biosimilars developed in oncology were the supportive-care agents filgrastim and epoetin. Binocrit® (HX575) is a biosimilar version of epoetin alfa, indicated in the oncology setting for the treatment of chemotherapy-induced anemia (CIA). The process for development and approval of Binocrit® as a biosimilar included extensive analytical characterization and comparison with the reference epoetin alfa. This was followed by a clinical development program comprising phase I pharmacokinetic/pharmacodynamic studies to show bioequivalence to the reference medicine and a confirmatory phase III study to confirm therapeutic effectiveness in CIA. Since its approval, Binocrit® has been extensively used and studied in real-world clinical practice. The accumulated data confirm that Binocrit® is an effective and well-tolerated option for the treatment of CIA in patients with cancer.

Solar cycle variations of the solar wind

NASA Technical Reports Server (NTRS)

Crooker, N. U.

1983-01-01

Throughout the course of the past one and a half solar cycles, solar wind parameters measured near the ecliptic plane at 1 AU varied in the following way: speed and proton temperature have maxima during the declining phase and minima at solar minimum and are approximately anti-correlated with number density and electron temperature, while magnetic field magnitude and relative abundance of helium roughly follow the sunspot cycle. These variations are described in terms of the solar cycle variations of coronal holes, streamers, and transients. The solar wind signatures of the three features are discussed in turn, with special emphasis on the signature of transients, which is still in the process of being defined. It is proposed that magnetic clouds be identified with helium abundance enhancements and that they form the head of a transient surrounded by streamer like plasma, with an optional shock front. It is stressed that relative values of a parameter through a solar cycle should be compared beginning with the declining phase, especially in the case of magnetic field magnitude.

Interferometric imaging of the 2011-2013 Campi Flegrei unrest

NASA Astrophysics Data System (ADS)

De Siena, Luca; Nakahara, Hisashi; Zaccarelli, Lucia; Sammarco, Carmelo; La Rocca, Mario; Bianco, Francesca

2017-04-01

After its 1983-84 seismic and deformation crisis, seismologists have recorded very low and clustered seismicity at Campi Flegrei caldera (Italy). Hence, noise interferometry imaging has become the only option to image the present volcano logical state of the volcano. Three-component noise data recorded before, during, and after Campi Flegrei last deformation and geochemical unrest (2011-2013) have thus been processed with up-to-date interferometric imaging workflow based on MSNoise. Noise anisotropy, which strongly affects measurements throughout the caldera at all frequencies, has been accounted for by self-correlation measurements and smoothed by phase weighted stacking and phase-match filtering. The final group-velocity maps show strong low-velocity anomalies at the location of the last Campi Flegrei eruption (1538 A.D.). The main low-velocity anomalies contour Solfatara volcano and follow geomorphological cross-faulting. The comparison with geophysical imaging results obtained during the last seismic unrest at the caldera suggest strong changes in the physical properties of the volcano, particularly in the area of major hydrogeological hazard.

Experimental investigation on phase change materials as heating element for non-electric neonatal incubator

NASA Astrophysics Data System (ADS)

Matahari, Rho Natta; Putra, Nandy; Ariantara, Bambang; Amin, Muhammad; Prawiro, Erwin

2017-02-01

High number of preterm births is one of the issues in improving health standard. The effort to help premature babies is hampered by high cost of NICU care in hospital. In addition, uneven distribution of electricity to remote area made it hard to operate the incubator. Utilization of phase change material beeswax to non-electricity incubator as heating element becomes alternative option to save premature babies. The objective of this experiment is to investigate the most efficient mass of beeswax according to Indonesian National Standard to earn over time and ideal temperature of incubator. Experiment was performed using prototype incubator, which utilizes natural convection phenomenon in the heating process of incubator. Utilization of fin is to accelerate heat distribution in the incubator. Result of experiment showed that the most efficient mass of PCM is 3 kg, which has 2.45 hours of running time for maintaining temperature of incubator in range of 32-36 °C.

Recycled poly(ethylene terephthalate) for direct food contact applications: challenge test of an inline recycling process.

PubMed

Franz, R; Welle, F

2002-05-01

Of all the plastics used for packaging, due to its low diffusivity and chemical inertness, poly(ethylene terephthalate) (PET) is one of the favoured candidate plastics for closed-loop recycling for new packaging applications. In the work reported here, a PET-recycling process was investigated with respect to its cleaning efficiency and compliance of the PET recyclate with food law. The key technology of the investigated PET-recycling process to remove contaminants consists of a predecontamination-extruder combination. At the end of the recycling process, there is either a pelletizing system or downstream equipment to produce preforms or flat sheets. Therefore, the process has two process options, an inline production of PET preforms and a batch option producing PET pellets. In the case of possible misuse of PET bottles by the consumer, the inline process produces higher concentrations in the bottle wall of the recyclate containing preforms. Owing to the dilution of the PET output material by large amounts of uncontaminated PET, the batch option is the less critical process in terms of consumer protection. Regarding an appropriate testing procedure for the evaluation of a bottle-to-bottle recycling process, both process options have their own specific requirements with respect to the design of a challenge test. A novel challenge test approach to the inline mode of a recycling process is presented here.

Application of ion chromatography in clinical studies and pharmaceutical industry.

PubMed

Michalski, Rajmund

2014-01-01

Ion chromatography is a well-established regulatory method for analyzing anions and cations in environmental, food and many other samples. It offers an enormous range of possibilities for selecting stationary and mobile phases. Additionally, it usually helps to solve various separation problems, particularly when it is combined with different detection techniques. Ion chromatography can also be used to determine many ions and substances in clinical and pharmaceutical samples. It provides: availability of high capacity stationary phases and sensitive detectors; simple sample preparation; avoidance of hazardous chemicals; decreased sample volumes; flexible reaction options on a changing sample matrix to be analyzed; or the option to operate a fully-automated system. This paper provides a short review of the ion chromatography applications for determining different inorganic and organic substances in clinical and pharmaceutical samples.

K-Basins Sludge Treatment and Packaging at the Hanford Site - 13585

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fogwell, Thomas W.; Honeyman, James O.; Stegen, Gary

Highly radioactive sludge resulting from the storage of degraded spent nuclear fuel has been consolidated in Engineered Containers (ECs) in the 105-K West Storage Basin located on the Hanford site near the Columbia River in Washington State. CH2M Hill Plateau Remediation Company (CHPRC) is proceeding with a project to retrieve the sludge, place it in Sludge Transport and Storage Containers (STSCs) and store those filled containers within the T Plant Canyon facility on the Hanford Site Central Plateau (Phase 1). Retrieval and transfer of the sludge material will enable removal of the 105-K West Basin and allow remediation of themore » subsurface contamination plumes under the basin. The U.S. Department of Energy (DOE) plans to treat and dispose of this K Basins sludge (Phase 2) as Remote Handled Transuranic Waste (RH TRU) at the Waste Isolation Pilot Plant (WIPP) located in New Mexico. The K Basin sludge currently contains uranium metal which reacts with water present in the stored slurry, generating hydrogen and other byproducts. The established transportation and disposal requirements require the transformation of the K Basins sludge to a chemically stable, liquid-free, packaged waste form. The Treatment and Packaging Project includes removal of the containerised sludge from T Plant, the treatment of the sludge as required, and packaging of all the sludge into a form that is certifiable for transportation to and disposal at WIPP. Completion of this scope will require construction and operation of a Sludge Treatment and Packaging Facility (STPF), which could be either a completely new facility or a modification of an existing Hanford Site facility. A Technology Evaluation and Alternatives Analysis (TEAA) for the STP Phase 2 was completed in 2011. A Request for Technology Information (RFI) had been issued in October 2009 to solicit candidate technologies for use in Phase 2. The RFI also included a preliminary definition of Phase 2 functions and requirements. Potentially applicable technologies were identified through a commercial procurement process, technical workshops, and review of the numerous previous sludge treatment technology studies. The identified technology approaches were screened using the criteria established in the Decision Plan, and focused bench top feasibility testing was conducted. Engineering evaluations of the costs, schedules, and technical maturity were developed and evaluated. Recommendations were developed based on technical evaluations. The criteria used in the evaluation process were as follows: (1) Safety, (2) Regulatory/stakeholder acceptance, (3) Technical maturity, (4) Operability and maintainability, (5) Life cycle cost and schedule, (6) Potential for beneficial integration with ongoing STP-Phase 1 activities, and (7) Integration with Site-wide RH-TRU processing/packaging, planning, schedule, and approach. The TEAA recommended Warm Water Oxidation (WWO) as the baseline treatment technology and two risk reduction enhancement options for further consideration during development of the process - size reduction and chemical oxidation (Fenton's reagent). The enhancement options would potentially allow a useful reduction in the total operating time required to process the K Basins sludge. The U.S. Department of Energy's Richland Field Office (DOE-RL) has approved this recommended technical approach. The baseline process can be broken down into the following main process steps: (1) STSC transfer from T Plant to the Sludge Treatment and Packaging Facility (STPF). (2) Retrieval of sludge from the STSCs and transfer to the Receipt and Reaction Tank (RRT). (3) Preparation for immobilization by oxidation using heated water (i.e., WWO) for those batches that require it and concentration by evaporating water at about atmospheric pressure in the RRT. (4) Immobilization by using additives to eliminate free liquids and packaging of the treated sludge into drums. (5) Inspection and handling of the filled drums prior to transfer to a separate storage and shipping facility. (6) Handling of vapor, condensate, and other waste streams generated by the process. Each of these steps is discussed in the paper, together with the current state of progress in developing the technology and requirements for continued development. A schematic of the recommended baseline WWO treatment process is given below. (authors)« less

Micro-PIV Study of Supercritical CO2-Water Interactions in Porous Micromodels

NASA Astrophysics Data System (ADS)

Kazemifar, Farzan; Blois, Gianluca; Christensen, Kenneth T.

2015-11-01

Multiphase flow of immiscible fluids in porous media is encountered in numerous natural systems and engineering applications such as enhanced oil recovery (EOR), and CO2 sequestration among others. Geological sequestration of CO2 in saline aquifers has emerged as a viable option for reducing CO2 emissions, and thus it has been the subject of numerous studies in recent years. A key objective is improving the accuracy of numerical models used for field-scale simulations by incorporation/better representation of the pore-scale flow physics. This necessitates experimental data for developing, testing and validating such models. We have studied drainage and imbibition processes in a homogeneous, two-dimensional porous micromodel with CO2 and water at reservoir-relevant conditions. Microscopic particle image velocimetry (micro-PIV) technique was applied to obtain spatially- and temporally-resolved velocity vector fields in the aqueous phase. The results provide new insight into the flow processes at the pore scale.

Challenges and Recent Developments in Hearing Aids: Part II. Feedback and Occlusion Effect Reduction Strategies, Laser Shell Manufacturing Processes, and Other Signal Processing Technologies

PubMed Central

Chung, King

2004-01-01

This is the second part of a review on the challenges and recent developments in hearing aids. Feedback and the occlusion effect pose great challenges in hearing aid design and usage. Yet, conventional solutions to feedback and the occlusion effect often create a dilemma: the solution to one often leads to the other. This review discusses the advanced signal processing strategies to reduce feedback and some new approaches to reduce the occlusion effect. Specifically, the causes of three types of feedback (acoustic, mechanical, and electromagnetic) are discussed. The strategies currently used to reduce acoustic feedback (i.e., adaptive feedback reduction algorithms using adaptive gain reduction, notch filtering, and phase cancellation strategies) and the design of new receivers that are built to reduce mechanical and electromagnetic feedback are explained. In addition, various new strategies (i.e., redesigned sound delivery devices and receiver-in-the-ear-canal hearing aid configuration) to reduce the occlusion effect are reviewed. Many manufacturers have recently adopted laser shell-manufacturing technologies to overcome problems associated with manufacturing custom hearing aid shells. The mechanisms of selected laser sintering and stereo lithographic apparatus and the properties of custom shells produced by these two processes are reviewed. Further, various new developments in hearing aid transducers, telecoils, channel-free amplification, open-platform programming options, rechargeable hearing aids, ear-level frequency modulated (FM) receivers, wireless Bluetooth FM systems, and wireless programming options are briefly explained and discussed. Finally, the applications of advanced hearing aid technologies to enhance other devices such as cochlear implants, hearing protectors, and cellular phones are discussed. PMID:15735871

Evaluation of INL Supplied MOOSE/OSPREY Model: Modeling Water Adsorption on Type 3A Molecular Sieve

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pompilio, L. M.; DePaoli, D. W.; Spencer, B. B.

The purpose of this study was to evaluate Idaho National Lab’s Multiphysics Object-Oriented Simulation Environment (MOOSE) software in modeling the adsorption of water onto type 3A molecular sieve (3AMS). MOOSE can be thought-of as a computing framework within which applications modeling specific coupled-phenomena can be developed and run. The application titled Off-gas SeParation and REcoverY (OSPREY) has been developed to model gas sorption in packed columns. The sorbate breakthrough curve calculated by MOOSE/OSPREY was compared to results previously obtained in the deep bed hydration tests conducted at Oak Ridge National Laboratory. The coding framework permits selection of various options, whenmore » they exist, for modeling a process. For example, the OSPREY module includes options to model the adsorption equilibrium with a Langmuir model or a generalized statistical thermodynamic adsorption (GSTA) model. The vapor solid equilibria and the operating conditions of the process (e.g., gas phase concentration) are required to calculate the concentration gradient driving the mass transfer between phases. Both the Langmuir and GSTA models were tested in this evaluation. Input variables were either known from experimental conditions, or were available (e.g., density) or were estimated (e.g., thermal conductivity of sorbent) from the literature. Variables were considered independent of time, i.e., rather than having a mass transfer coefficient that varied with time or position in the bed, the parameter was set to remain constant. The calculated results did not coincide with data from laboratory tests. The model accurately estimated the number of bed volumes processed for the given operating parameters, but breakthrough times were not accurately predicted, varying 50% or more from the data. The shape of the breakthrough curves also differed from the experimental data, indicating a much wider sorption band. Model modifications are needed to improve its utility and predictive capability. Recommended improvements include: greater flexibility for input of mass transfer parameters, time-variable gas inlet concentration, direct output of loading and temperature profiles along the bed, and capability to conduct simulations of beds in series.« less

Space station operations task force. Panel 3 report: User development and integration

NASA Technical Reports Server (NTRS)

1987-01-01

The User Development and Integration Panel of the Space Station Operations Task Force was chartered to develop concepts relating to the operations of the Space Station manned base and the platforms, user accommodation and integration activities. The needs of the user community are addressed in the context with the mature operations phase of the Space Station. Issues addressed include space station pricing options, marketing strategies, payload selection and resource allocation options, and manifesting techniques.

The RealGas and RealGasH2O options of the TOUGH+ code for the simulation of coupled fluid and heat flow in tight/shale gas systems

EPA Science Inventory

We developed two new EOS additions to the TOUGH+ family of codes, the RealGasH2O and RealGas. The RealGasH2O EOS option describes the non-isothermal two-phase flow of water and a real gas mixture in gas reservoirs, with a particular focus in ultra-tight (such as tight-sand and sh...

Analysis of edible oil processing options for the BIO-Plex advanced life support system

NASA Technical Reports Server (NTRS)

Greenwalt, C. J.; Hunter, J.

2000-01-01

Edible oil is a critical component of the proposed plant-based Advanced Life Support (ALS) diet. Soybean, peanut, and single-cell oil are the oil source options to date. In terrestrial manufacture, oil is ordinarily extracted with hexane, an organic solvent. However, exposed solvents are not permitted in the spacecraft environment or in enclosed human tests by National Aeronautics and Space Administration due to their potential danger and handling difficulty. As a result, alternative oil-processing methods will need to be utilized. Preparation and recovery options include traditional dehulling, crushing, conditioning, and flaking, extrusion, pressing, water extraction, and supercritical extraction. These processing options were evaluated on criteria appropriate to the Advanced Life Support System and BIO-Plex application including: product quality, product stability, waste production, risk, energy needs, labor requirements, utilization of nonrenewable resources, usefulness of by-products, and versatility and mass of equipment to determine the most appropriate ALS edible oil-processing operation.

Invited Review Article: Methods for imaging weak-phase objects in electron microscopy

PubMed Central

Glaeser, Robert M.

2013-01-01

Contrast has traditionally been produced in electron-microscopy of weak phase objects by simply defocusing the objective lens. There now is renewed interest, however, in using devices that apply a uniform quarter-wave phase shift to the scattered electrons relative to the unscattered beam, or that generate in-focus image contrast in some other way. Renewed activity in making an electron-optical equivalent of the familiar “phase-contrast” light microscope is based in part on the improved possibilities that are now available for device microfabrication. There is also a better understanding that it is important to take full advantage of contrast that can be had at low spatial frequency when imaging large, macromolecular objects. In addition, a number of conceptually new phase-plate designs have been proposed, thus increasing the number of options that are available for development. The advantages, disadvantages, and current status of each of these options is now compared and contrasted. Experimental results that are, indeed, superior to what can be accomplished with defocus-based phase contrast have been obtained recently with two different designs of phase-contrast aperture. Nevertheless, extensive work also has shown that fabrication of such devices is inconsistent, and that their working lifetime is short. The main limitation, in fact, appears to be electrostatic charging of any device that is placed into the electron diffraction pattern. The challenge in fabricating phase plates that are practical to use for routine work in electron microscopy thus may be more in the area of materials science than in the area of electron optics. PMID:24289381

Predictors of affect following treatment decision-making for prostate cancer: conversations, cognitive processing, and coping.

PubMed

Christie, Kysa M; Meyerowitz, Beth E; Giedzinska-Simons, Antoinette; Gross, Mitchell; Agus, David B

2009-05-01

Research suggests that cancer patients who are more involved in treatment decision-making (TDM) report better quality of life following treatment. This study examines the association and possible mechanisms between prostate cancer patient's discussions about TDM and affect following treatment. We predicted that the length of time patients spent discussing treatment options with social networks and physicians prior to treatment would predict emotional adjustment after treatment. We further predicted that cognitive processing, coping, and patient understanding of treatment options would mediate this association. Fifty-seven patients completed questionnaires prior to treatment and at 1 and 6 months following treatment completion. Findings from the present study suggest that discussing treatment options with others, prior to beginning treatment for prostate cancer, significantly contributed to improvements in affect 1 and 6 months following treatment. Residualized regression analyses indicated that discussing treatment options with patient's social networks predicted a decrease in negative affect 1 and 6 months following treatment, while discussions with physicians predicted an increase in positive affect 1 month following treatment. Patients who spent more time discussing treatment options with family and friends also reported greater pre-treatment social support and emotional expression. Mediation analyses indicated that these coping strategies facilitated cognitive processing (as measured by a decrease in intrusive thoughts) and that cognitive processing predicted improvement in affect. Greater time spent talking with family and friends about treatment options may provide opportunities for patients to cope with their cancer diagnosis and facilitate cognitive processing, which may improve patient distress over time. Copyright (c) 2008 John Wiley & Sons Ltd.

Phase II trial suggests new drug can shrink tumors in advanced ovarian cancer | Center for Cancer Research

Cancer.gov

In an ongoing phase II trial led by Jung-Min Lee, M.D., an Investigator in CCR’s Women’s Malignancies Branch, using the drug prexasertib led to decreases in tumor size in patients with advanced ovarian cancer, known as high-grade serious ovarian carcinoma, who currently have limited treatment options. Read more…

Advanced GPS Technologies (AGT)

DTIC Science & Technology

2015-05-01

Distribution A GPS Ill Developmental Optical Clock Deployable Antenna Concept 3 \\.J Science and Technology for GPS •:• Spacecraft • AFRL has funded a...Digital Waveform Generators New antenna concepts Supporting electronics Algorithms and new signal combining methods Satellite bus technologies...GPS Military High Gain Antenna Developing Options for Ground Testing 1) Deployable phased array • Low profile element • High efficiency phase

United States transportation fuel economics (1975 - 1995)

NASA Technical Reports Server (NTRS)

Alexander, A. D., III

1975-01-01

The United States transportation fuel economics in terms of fuel resources options, processing alternatives, and attendant economics for the period 1975 to 1995 are evaluated. The U.S. energy resource base is reviewed, portable fuel-processing alternatives are assessed, and selected future aircraft fuel options - JP fuel, liquid methane, and liquid hydrogen - are evaluated economically. Primary emphasis is placed on evaluating future aircraft fuel options and economics to provide guidance for future strategy of NASA in the development of aviation and air transportation research and technology.

Engineering Options Assessment Report. Nitrate Salt Waste Stream Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anast, Kurt Roy

2015-11-13

This report examines and assesses the available systems and facilities considered for carrying out remediation activities on remediated nitrate salt (RNS) and unremediated nitrate salt (UNS) waste containers at Los Alamos National Laboratory (LANL). The assessment includes a review of the waste streams consisting of 60 RNS, 29 above-ground UNS, and 79 candidate below-ground UNS containers that may need remediation. The waste stream characteristics were examined along with the proposed treatment options identified in the Options Assessment Report . Two primary approaches were identified in the five candidate treatment options discussed in the Options Assessment Report: zeolite blending and cementation.more » Systems that could be used at LANL were examined for housing processing operations to remediate the RNS and UNS containers and for their viability to provide repackaging support for remaining LANL legacy waste.« less

Engineering Options Assessment Report: Nitrate Salt Waste Stream Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anast, Kurt Roy

2015-11-18

This report examines and assesses the available systems and facilities considered for carrying out remediation activities on remediated nitrate salt (RNS) and unremediated nitrate salt (UNS) waste containers at Los Alamos National Laboratory (LANL). The assessment includes a review of the waste streams consisting of 60 RNS, 29 aboveground UNS, and 79 candidate belowground UNS containers that may need remediation. The waste stream characteristics were examined along with the proposed treatment options identified in the Options Assessment Report . Two primary approaches were identified in the five candidate treatment options discussed in the Options Assessment Report: zeolite blending and cementation.more » Systems that could be used at LANL were examined for housing processing operations to remediate the RNS and UNS containers and for their viability to provide repackaging support for remaining LANL legacy waste.« less

Multi-cluster processor operating only select number of clusters during each phase based on program statistic monitored at predetermined intervals

DOEpatents

Balasubramonian, Rajeev [Sandy, UT; Dwarkadas, Sandhya [Rochester, NY; Albonesi, David [Ithaca, NY

2009-02-10

In a processor having multiple clusters which operate in parallel, the number of clusters in use can be varied dynamically. At the start of each program phase, the configuration option for an interval is run to determine the optimal configuration, which is used until the next phase change is detected. The optimum instruction interval is determined by starting with a minimum interval and doubling it until a low stability factor is reached.

Value-Based Assessment of New Medical Technologies: Towards a Robust Methodological Framework for the Application of Multiple Criteria Decision Analysis in the Context of Health Technology Assessment.

PubMed

Angelis, Aris; Kanavos, Panos

2016-05-01

In recent years, multiple criteria decision analysis (MCDA) has emerged as a likely alternative to address shortcomings in health technology assessment (HTA) by offering a more holistic perspective to value assessment and acting as an alternative priority setting tool. In this paper, we argue that MCDA needs to subscribe to robust methodological processes related to the selection of objectives, criteria and attributes in order to be meaningful in the context of healthcare decision making and fulfil its role in value-based assessment (VBA). We propose a methodological process, based on multi-attribute value theory (MAVT) methods comprising five distinct phases, outline the stages involved in each phase and discuss their relevance in the HTA process. Importantly, criteria and attributes need to satisfy a set of desired properties, otherwise the outcome of the analysis can produce spurious results and misleading recommendations. Assuming the methodological process we propose is adhered to, the application of MCDA presents three very distinct advantages to decision makers in the context of HTA and VBA: first, it acts as an instrument for eliciting preferences on the performance of alternative options across a wider set of explicit criteria, leading to a more complete assessment of value; second, it allows the elicitation of preferences across the criteria themselves to reflect differences in their relative importance; and, third, the entire process of preference elicitation can be informed by direct stakeholder engagement, and can therefore reflect their own preferences. All features are fully transparent and facilitate decision making.

Role of Immune Checkpoint Inhibitors in Small Cell Lung Cancer.

PubMed

Cooper, Maryann R; Alrajhi, Abdullah M; Durand, Cheryl R

Small cell lung cancer (SCLC) accounts for approximately 13% of all lung cancer diagnoses each year. SCLC is characterized by a rapid doubling time, early metastatic spread, and an unfavorable prognosis overall. Most patients with SCLC will respond to initial treatment; however, the majority will experience a disease recurrence and response to second-line therapies is poor. Immune checkpoint inhibitors may be an option given the success in other diseases. A literature search was conducted using Medline (1946-July week 1, 2017) and Embase (1996-2017 week 28) with the search terms small cell lung cancer combined with nivolumab or ipilimumab or pembrolizumab or atezolizumab or tremelimumab or durvalumab. Five clinical trials, including extended follow-up for 2, that evaluated immune checkpoint inhibitors in limited stage or extensive stage SCLC were included. In 2 phase 2 trials, ipilimumab was added to upfront chemotherapy. In both trials, an improvement in progression-free survival was seen. Toxicity, when combined with a platinum and etoposide, was significant. In a confirmatory phase 3 trial, ipilimumab did not prolong overall survival when added to first-line chemotherapy. Overall, response rates were similar between the placebo and ipilimumab groups. A phase 1/2 trial evaluated nivolumab alone or in combination with ipilimumab in recurrent SCLC. Results revealed that nivolumab monotherapy and the combination of nivolumab and ipilimumab were relatively safe and had antitumor activity. Pembrolizumab has been evaluated in a multicohort, phase 1b trial. Preliminary data showed a durable response in the second-line setting. Given the lack of overall survival data and significant toxicity associated with the combination of ipilimumab with first-line chemotherapy, this treatment is not a reasonable option at this time. Nivolumab alone or in combination with ipilimumab is a valid option for recurrent SCLC.

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program

NASA Technical Reports Server (NTRS)

Kaufman, J. W. (Editor)

1980-01-01

The purpose of the first scientific working group meeting was fourfold: (1) to identify flight test options for engineering verification of the MSFC Doppler Lidar; (2) to identify flight test options for gathering data for scientific/technology applications; (3) to identify additional support equipment needed on the CV 990 aircraft for the flight tests; and (4) to identify postflight data processing and data sets requirements. The working group identified approximately ten flight options for gathering data on atmospheric dynamics processes, including turbulence, valley breezes, and thunderstorm cloud anvil and cold air outflow dynamics. These test options will be used as a basis for planning the fiscal year 1981 tests of the Doppler Lidar system.

Treatment of Produced Water Using a Surfactant Modified Zeolite/Vapor Phase Bioreactor System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn E. Katz; Kerry A. Kinney; Robert S. Bowman

2006-01-31

Co-produced water from the oil and gas industry accounts for a significant waste stream in the United States. Produced waters typically contain a high total dissolved solids content, dissolved organic constituents such as benzene and toluene, an oil and grease component as well as chemicals added during the oil-production process. It has been estimated that a total of 14 billion barrels of produced water were generated in 2002 from onshore operations (Veil, 2004). Although much of this produced water is disposed via reinjection, environmental and cost considerations can make surface discharge of this water a more practical means of disposal.more » In addition, reinjection is not always a feasible option because of geographic, economic, or regulatory considerations. In these situations, it may be desirable, and often necessary from a regulatory viewpoint, to treat produced water before discharge. It may also be feasible to treat waters that slightly exceed regulatory limits for re-use in arid or drought-prone areas, rather than losing them to reinjection. A previous project conducted under DOE Contract DE-AC26-99BC15221 demonstrated that surfactant modified zeolite (SMZ) represents a potential treatment technology for produced water containing BTEX. Laboratory and field experiments suggest that: (1) sorption of benzene, toluene, ethylbenzene and xylenes (BTEX) to SMZ follows linear isotherms in which sorption increases with increasing solute hydrophobicity; (2) the presence of high salt concentrations substantially increases the capacity of the SMZ for BTEX; (3) competitive sorption among the BTEX compounds is negligible; and, (4) complete recovery of the SMZ sorption capacity for BTEX can be achieved by air sparging the SMZ. This report summarizes research for a follow on project to optimize the regeneration process for multiple sorption/regeneration cycles, and to develop and incorporate a vapor phase bioreactor (VPB) system for treatment of the off-gas generated during air sparging. To this end, we conducted batch and column laboratory SMZ and VPB experiments with synthetic and actual produced waters. Based on the results of the laboratory testing, a pilot scale study was designed and conducted to evaluate the combined SMZ/VPB process. An economic and regulatory feasibility analysis was also completed as part of the current study to assess the viability of the process for various water re-use options.« less

Temporal dynamics of choice behavior in rats and humans: an examination of pre- and post-choice latencies

PubMed Central

Fam, Justine; Westbrook, Fred; Arabzadeh, Ehsan

2016-01-01

Identifying similarities and differences in choice behavior across species is informative about how basic mechanisms give rise to more complex processes. In the present study, we compared pre- and post-choice latencies between rats and humans under two paradigms. In Experiment 1, we used a cued choice paradigm where subjects were presented with a cue that directed them as to which of two options to respond for rewards. In Experiment 2, subjects were free to choose between two options in order to procure rewards. In both Experiments rewards were delivered with distinct probabilities. The trial structure used in these experiments allowed the choice process to be decomposed into pre- and post-choice processes. Overall, post-choice latencies reflected the difference in reward probability between the two options, where latencies for the option with higher probability of reward were longer than those for the option with lower probability of reward. An interesting difference between rats and humans was observed: the choice behavior for humans, but not rats, was sensitive to the free-choice aspect of the tasks, such that in free-choice trials post-choice latencies no longer reflected the difference in reward probabilities between the two options. PMID:26862000

77 FR 48580 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Granting...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

.... Description of the Proposal FLEX Options, unlike traditional standardized options, allow investors to..., settling, processing information with respect to, and facilitating transactions in securities, to remove... general, to protect investors and the public interest; and not be designed to permit unfair discrimination...

Advances in Support of the CMAQ Bidirectional Science Option for the Estimation of Ammonia Flux from Agricultural cropland

EPA Science Inventory

Proposed Session: Emissions Inventories, Models and processes: Last year a new CMAQ bidirectional option for the estimation of ammonia flux (emission and deposition) was released. This option essentially replaces NEI crop ammonia emissions with emissions calculated dynamically...

Real-Time Optical Monitoring and Simulations of Gas Phase Kinetics in InN Vapor Phase Epitaxy at High Pressure

NASA Technical Reports Server (NTRS)

Dietz, Nikolaus; Woods, Vincent; McCall, Sonya D.; Bachmann, Klaus J.

2003-01-01

Understanding the kinetics of nucleation and coalescence of heteroepitaxial thin films is a crucial step in controlling a chemical vapor deposition process, since it defines the perfection of the heteroepitaxial film both in terms of extended defect formation and chemical integrity of the interface. The initial nucleation process also defines the film quality during the later stages of film growth. The growth of emerging new materials heterostructures such as InN or In-rich Ga(x)In(1-x)N require deposition methods operating at higher vapor densities due to the high thermal decomposition pressure in these materials. High nitrogen pressure has been demonstrated to suppress thermal decomposition of InN, but has not been applied yet in chemical vapor deposition or etching experiments. Because of the difficulty with maintaining stochiometry at elevated temperature, current knowledge regarding thermodynamic data for InN, e.g., its melting point, temperature-dependent heat capacity, heat and entropy of formation are known with far less accuracy than for InP, InAs and InSb. Also, no information exists regarding the partial pressures of nitrogen and phosphorus along the liquidus surfaces of mixed-anion alloys of InN, of which the InN(x)P(1-x) system is the most interesting option. A miscibility gap is expected for InN(x)P(1-x) pseudobinary solidus compositions, but its extent is not established at this point by experimental studies under near equilibrium conditions. The extension of chemical vapor deposition to elevated pressure is also necessary for retaining stoichiometric single phase surface composition for materials that are characterized by large thermal decomposition pressures at optimum processing temperatures.

Recovery of sugars from ionic liquid biomass liquor by solvent extraction

DOEpatents

Brennan, Timothy Charles R.; Holmes, Bradley M.; Simmons, Blake A.; Blanch, Harvey W.

2015-10-13

The present invention provides for a composition comprising a solution comprising (a) an ionic liquid (IL) or ionic liquid-aqueous (ILA) phase and (b) an organic phase, wherein the solution comprises a sugar and a boronic acid. The present invention also provides for a method of removing a sugar from a solution, comprising: (a) providing a solution comprising (i) an IL or ILA phase and (ii) an organic phase, wherein the solution comprises an IL, a sugar and a boronic acid; (b) contacting the sugar with the boronic acid to form a sugar-boronic acid complex, (c) separating the organic phase and the aqueous phase, wherein the organic phase contains the sugar-boronic acid complex, and optionally (d) separating the sugar from the organic phase.

42 CFR 413.195 - Limitation on Review.

Code of Federal Regulations, 2013 CFR

2013-10-01

...; OPTIONAL PROSPECTIVELY DETERMINED PAYMENT RATES FOR SKILLED NURSING FACILITIES Payment for End-Stage Renal... the Act, the application of the phase-in under section 1881(b)(14)(E) of the Act, and the...

42 CFR 413.195 - Limitation on Review.

Code of Federal Regulations, 2012 CFR

2012-10-01

...; OPTIONAL PROSPECTIVELY DETERMINED PAYMENT RATES FOR SKILLED NURSING FACILITIES Payment for End-Stage Renal... the Act, the application of the phase-in under section 1881(b)(14)(E) of the Act, and the...

42 CFR 413.195 - Limitation on Review.

Code of Federal Regulations, 2014 CFR

2014-10-01

...; OPTIONAL PROSPECTIVELY DETERMINED PAYMENT RATES FOR SKILLED NURSING FACILITIES Payment for End-Stage Renal... the Act, the application of the phase-in under section 1881(b)(14)(E) of the Act, and the...

42 CFR 413.195 - Limitation on Review.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; OPTIONAL PROSPECTIVELY DETERMINED PAYMENT RATES FOR SKILLED NURSING FACILITIES Payment for End-Stage Renal... the Act, the application of the phase-in under section 1881(b)(14)(E) of the Act, and the...

42 CFR 413.195 - Limitation on Review.

Code of Federal Regulations, 2011 CFR

2011-10-01

...; OPTIONAL PROSPECTIVELY DETERMINED PAYMENT RATES FOR SKILLED NURSING FACILITIES Payment for End-Stage Renal... the Act, the application of the phase-in under section 1881(b)(14)(E) of the Act, and the...

Roadwaste management : a tool for developing district plans.

DOT National Transportation Integrated Search

2000-10-01

The Oregon Department of Transportation (ODOT) conducted a study to examine roadwaste management options. Phase 1 consisted of a thorough review of regulations and standards, roadwaste characterization, current management practices, and new technolog...

48 CFR 570.105-2 - Two-phase design-build selection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... lease construction projects with options to purchase the real property leased. Use the procedures in.... (iii) The capability and experience of potential contractors. (iv) The suitability of the project for...

Cultural adaptation and translation of measures: an integrated method.

PubMed

Sidani, Souraya; Guruge, Sepali; Miranda, Joyal; Ford-Gilboe, Marilyn; Varcoe, Colleen

2010-04-01

Differences in the conceptualization and operationalization of health-related concepts may exist across cultures. Such differences underscore the importance of examining conceptual equivalence when adapting and translating instruments. In this article, we describe an integrated method for exploring conceptual equivalence within the process of adapting and translating measures. The integrated method involves five phases including selection of instruments for cultural adaptation and translation; assessment of conceptual equivalence, leading to the generation of a set of items deemed to be culturally and linguistically appropriate to assess the concept of interest in the target community; forward translation; back translation (optional); and pre-testing of the set of items. Strengths and limitations of the proposed integrated method are discussed. (c) 2010 Wiley Periodicals, Inc.

A DG approach to the numerical solution of the Stein-Stein stochastic volatility option pricing model

NASA Astrophysics Data System (ADS)

Hozman, J.; Tichý, T.

2017-12-01

Stochastic volatility models enable to capture the real world features of the options better than the classical Black-Scholes treatment. Here we focus on pricing of European-style options under the Stein-Stein stochastic volatility model when the option value depends on the time, on the price of the underlying asset and on the volatility as a function of a mean reverting Orstein-Uhlenbeck process. A standard mathematical approach to this model leads to the non-stationary second-order degenerate partial differential equation of two spatial variables completed by the system of boundary and terminal conditions. In order to improve the numerical valuation process for a such pricing equation, we propose a numerical technique based on the discontinuous Galerkin method and the Crank-Nicolson scheme. Finally, reference numerical experiments on real market data illustrate comprehensive empirical findings on options with stochastic volatility.

Integration of a Community Pharmacy Simulation Program into a Therapeutics Course.

PubMed

Shin, Jaekyu; Tabatabai, Daryush; Boscardin, Christy; Ferrone, Marcus; Brock, Tina

2018-02-01

Objective. To demonstrate the feasibility of integrating the computer simulation, MyDispense, into a therapeutics course and to measure its effects on student perception and learning. Methods. We conducted a prospective study with an experimental phase and an implementation phase. In the first phase, students were randomized to complete a therapeutics case using MyDispense or traditional paper methods in class. In the second phase, all students completed two therapeutic cases using MyDispense in class with the option to complete four additional outside-of-class cases using MyDispense. Students completed pre- and post-tests in class and three surveys. Results. In the experimental phase, mean test scores increased from pre- to post-test for both MyDispense and traditional paper groups, but the difference between the groups was not statistically significant. Students in the traditional paper group reported statistically significant gains in confidence compared to the MyDispense group. In the implementation phase, mean test scores again increased, however, student perception of the use of MyDispense for therapeutics was negative. Completing the optional outside-of-class cases, however, was positively and significantly correlated with the midterm and final examination scores. Conclusion. Implementation of MyDispense in therapeutics may be feasible and has positive effects (eg, correlation with exam scores, capacity for immediate feedback, and potential for effective self-study). With short-term use and in the absence of assessment methods that also require seeking information from patients, students prefer to learn via traditional paper cases.

Will I Regret It? Anticipated Negative Emotions Modulate Choices in Moral Dilemmas

PubMed Central

Pletti, Carolina; Lotto, Lorella; Tasso, Alessandra; Sarlo, Michela

2016-01-01

We tested if post-decisional emotions of regret, guilt, shame, anger, and disgust can account for individuals’ choices in moral dilemmas depicting the choice of letting some people die (non-utilitarian option) or sacrificing one person to save them (utilitarian option). We collected participants’ choices and post-decisional emotional ratings for each option using Footbridge-type dilemmas, in which the sacrifice of one person is the means to save more people, and Trolley-type dilemmas, in which the sacrifice is only a side effect. Moreover, we computed the EEG Readiness Potential to test if the neural activity related to the last phase of decision-making was related to the emotional conflict. Participants reported generally stronger emotions for the utilitarian as compared to the non-utilitarian options, with the exception of anger and regret, which in Trolley-type dilemmas were stronger for the non-utilitarian option. Moreover, participants tended to choose the option that minimized the intensity of negative emotions, irrespective of dilemma type. No significant relationship between emotions and the amplitude of the Readiness Potential emerged. It is possible that anticipated post-decisional emotions play a role in earlier stages of decision-making. PMID:27999559

Information Distortion in the Evaluation of a Single Option

ERIC Educational Resources Information Center

Bond, Samuel D.; Carlson, Kurt A.; Meloy, Margaret G.; Russo, J. Edward; Tanner, Robin J.

2007-01-01

Extending previous work on biased predecisional processing, we investigate the distortion of information during the evaluation of a single option. A coherence-based account of the evaluation task suggests that individuals will form an initial assessment of favorability toward the option and then bias their evaluation of subsequent information to…

32 CFR 211.9 - Mitigation Options.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 2 2013-07-01 2013-07-01 false Mitigation Options. 211.9 Section 211.9 National... MISSION COMPATIBILITY EVALUATION PROCESS Project Evaluation Procedures § 211.9 Mitigation Options. (a) In discussing mitigation to avoid an unacceptable risk to the national security of the United States, the DoD...

32 CFR 211.9 - Mitigation options.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false Mitigation options. 211.9 Section 211.9 National... MISSION COMPATIBILITY EVALUATION PROCESS Project Evaluation Procedures § 211.9 Mitigation options. (a) In discussing mitigation to avoid an unacceptable risk to the national security of the United States, the DoD...

32 CFR 211.9 - Mitigation Options.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 2 2012-07-01 2012-07-01 false Mitigation Options. 211.9 Section 211.9 National... MISSION COMPATIBILITY EVALUATION PROCESS Project Evaluation Procedures § 211.9 Mitigation Options. (a) In discussing mitigation to avoid an unacceptable risk to the national security of the United States, the DoD...

State of the art and perspectives in the treatment of glioblastoma.

PubMed

Grimm, Sean A; Chamberlain, Marc C

2012-09-01

Glioblastoma is the most common malignant primary brain tumor. Cures are rare and median survival varies from several to 22 months. Standard treatment for good performance patients consists of maximal safe surgical resection followed by radiotherapy with concurrent temozolomide (TMZ) chemotherapy and six cycles of postradiotherapy TMZ. At recurrence, treatment options include repeat surgery (with or without Gliadel wafer placement), reirradiation or systemic therapy. Most patients with good performance status are treated with cytotoxic chemotherapy or targeted biologic therapy following or in lieu of repeat surgery. Cytotoxic chemotherapy options include nitrosoureas, rechallenge with TMZ, platins, phophoramides and topoisomerase inhibitors, although efficacy is limited. Despite the intense effort of developing biologic agents that target angiogenesis and growth and proliferative pathways, bevacizumab is the only agent that has shown efficacy in clinical trials. It was awarded accelerated approval in the USA after demonstrating an impressive radiographic response in two open-label, prospective Phase II studies. Two randomized, Phase III trials of upfront bevacizumab have completed and may demonstrate survival benefit; however, results are pending at this time. Given the limited treatment options at tumor recurrence, consideration for enrollment on a clinical trial is encouraged.

Brine Extraction and Treatment Strategies to Enhance Pressure Management and Control of CO 2 Plumes in Deep Geologic Formations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okwen, Roland; Frailey, Scott; Dastgheib, Seyed

The overall goal of the this project is to develop and validate pressure management and carbon dioxide (CO 2) plume control strategies that can address technical and economic barriers to commercial deployment of CO 2 storage technologies, based on computational and field demonstration work at the Archer Daniels Midland Company (ADM) facility where the Illinois Basin–Decatur Project (IBDP) and the Illinois-Industrial Carbon Capture and Storage (IL-ICCS) projects are located. To accomplish the overall goal, the ISGS designed a brine extraction storage test (BEST) that could be completed in two phases. The goal of BEST Phase I was to evaluate themore » feasibilities of extraction well(s) placement, the brine extraction to CO 2 injection rate ratio, extraction well completion, and brine treatment and handling. The goal of BEST Phase II would be to validate the brine extraction and treatment options deemed feasible in Phase I by (1) demonstrating the efficacy of brine extraction (BE) in managing pressure (i.e., formation) and the CO 2 plume, and (2) demonstrating treatment of extracted brine with high total dissolved solids (TDS; >200,000 mg/L) using multiple advanced treatment technologies. This report details work done in Phase I. Several brine extraction and treatment scenarios were tested, simulated, and analyzed for their effectiveness in extracting brine. Initially a vertical well was studied; however, geologic modeling, reservoir modeling, and the existing facility and wellbore infrastructure dictated that the location of a vertical brine extraction well was limited to an area with no existing monitoring wells and where the well would be in relative proximity to an existing CO 2 plume. Consequently, a vertical well was excluded, and a horizontal brine extraction well placed above the existing CO 2 plume near two existing wells was studied. The horizontal well option allows the project to leverage the availability of cased-hole logs and cross-well tomography to monitor CO 2 saturation and plume distribution, respectively. Because of the proximity of the horizontal well option to two existing wells, no additional monitoring well (or caprock penetration) is required. The recommended brine extraction pilot design options are (1) a horizontal extraction well at the base of the Middle Mt. Simon, which is 350–520 ft (107–158 m) above the CO 2 plume at CCS#1 and VW#1; or (2) a vertical extraction well 0.5 mi (0.8 km) from CCS#2 in a direction approximately southeast of CCS#2, perpendicular to the direction of high hydraulic connectivity. A horizontal extraction well has advantages over a vertical extraction well, including less risk of drilling into an existing CO 2 plume and it can be located between two other wells that can be used for monitoring. Thus, because the two existing wells can serve as monitoring wells, it eliminates the need for a third verification well and allows for a lower extraction rate to control the CO 2 plume and pressure. Managing pressure and the CO 2 plume distribution via brine extraction creates the obvious and important challenge of handling and treating the extracted brine. There were three options for brine disposal: (1) underground injection control (UIC) disposal well, (2) brine treatment and industrial use, and (3) brine pretreatment and discharge into municipal wastewater system. The primary design elements were budget and permitting requirements. The disposal well would be a vertical well drilled and completed into the Potosi Dolomite. For the range of extraction rates anticipated, the cost of this well is relatively constant. The cost of brine treatment is highly depends on the extraction rate, which depends on the well orientation. If relatively high rates are required, the vertical disposal well option is more favorable; for relatively lower rates, the two brine treatment options have lower costs. Life-cycle-analysis studies on extracted brine handling options suggest that a UIC well has a lower environmental impact than brine treatment. Both brine disposal options using brine treatment require removal of suspended solids from the extracted brine. The most suitable commercially available technology and the most promising emerging and innovative technology are recommended for implementation in Phase II. Though the challenges of this project are written specific to Decatur, every CO 2 storage site considering the use of brine extraction integrated with CO 2 storage will have similar, if not identical, technical and logistical challenges.« less

Pasireotide for the treatment of acromegaly.

PubMed

Wildemberg, Luiz Eduardo; Gadelha, Mônica R

2016-01-01

Acromegaly is a chronic disease with high morbidity and enhanced mortality if left untreated. Treatment options include surgery, medical therapy (somatostatin analogues (SA), dopamine agonists (DA) and growth hormone receptor antagonists) and radiotherapy. Despite these treatment options, "real-life" studies have shown that approximately 50% of patients are not controlled. In this scenario, a next-generation SA, pasireotide, has recently been approved for the treatment of acromegaly. 1) pasireotide's pharmacokinetics and pharmacodynamics; 2) pasireotide's anti-secretory and anti-proliferative effects, from preclinical studies up to phase III clinical trials; and 3) the adverse effects of pasireotide, focusing on hyperglycemia; 4) biomarkers of response to SA treatment. surgery is the primary treatment for most patients with acromegaly; however, approximately half of them will need adjuvant therapy. At present, the decision of this adjuvant treatment is made on a "trial-and-error" fashion. Nevertheless, in recent years, efforts have been made to establish biomarkers for the response to drugs involved in the treatment of acromegaly, which will change the treatment of acromegaly towards a more personalized therapeutic decision-making process. In the near future, the establishment of pasireotide response biomarkers will allow us to identify good candidates for first-line medical monotherapy with pasireotide.

Calibration of Lévy Processes with American Options

NASA Astrophysics Data System (ADS)

Achdou, Yves

We study options on financial assets whose discounted prices are exponential of Lévy processes. The price of an American vanilla option as a function of the maturity and the strike satisfies a linear complementarity problem involving a non-local partial integro-differential operator. It leads to a variational inequality in a suitable weighted Sobolev space. Calibrating the Lévy process may be done by solving an inverse least square problem where the state variable satisfies the previously mentioned variational inequality. We first assume that the volatility is positive: after carefully studying the direct problem, we propose necessary optimality conditions for the least square inverse problem. We also consider the direct problem when the volatility is zero.

Field-scale multi-phase LNAPL remediation: Validating a new computational framework against sequential field pilot trials.

PubMed

Sookhak Lari, Kaveh; Johnston, Colin D; Rayner, John L; Davis, Greg B

2018-03-05

Remediation of subsurface systems, including groundwater, soil and soil gas, contaminated with light non-aqueous phase liquids (LNAPLs) is challenging. Field-scale pilot trials of multi-phase remediation were undertaken at a site to determine the effectiveness of recovery options. Sequential LNAPL skimming and vacuum-enhanced skimming, with and without water table drawdown were trialled over 78days; in total extracting over 5m 3 of LNAPL. For the first time, a multi-component simulation framework (including the multi-phase multi-component code TMVOC-MP and processing codes) was developed and applied to simulate the broad range of multi-phase remediation and recovery methods used in the field trials. This framework was validated against the sequential pilot trials by comparing predicted and measured LNAPL mass removal rates and compositional changes. The framework was tested on both a Cray supercomputer and a cluster. Simulations mimicked trends in LNAPL recovery rates (from 0.14 to 3mL/s) across all remediation techniques each operating over periods of 4-14days over the 78day trial. The code also approximated order of magnitude compositional changes of hazardous chemical concentrations in extracted gas during vacuum-enhanced recovery. The verified framework enables longer term prediction of the effectiveness of remediation approaches allowing better determination of remediation endpoints and long-term risks. Copyright © 2017 Commonwealth Scientific and Industrial Research Organisation. Published by Elsevier B.V. All rights reserved.

The European style arithmetic Asian option pricing with stochastic interest rate based on Black Scholes model

NASA Astrophysics Data System (ADS)

Winarti, Yuyun Guna; Noviyanti, Lienda; Setyanto, Gatot R.

2017-03-01

The stock investment is a high risk investment. Therefore, there are derivative securities to reduce these risks. One of them is Asian option. The most fundamental of option is option pricing. Many factors that determine the option price are underlying asset price, strike price, maturity date, volatility, risk free interest rate and dividends. Various option pricing usually assume that risk free interest rate is constant. While in reality, this factor is stochastic process. The arithmetic Asian option is free from distribution, then, its pricing is done using the modified Black-Scholes model. In this research, the modification use the Curran approximation. This research focuses on the arithmetic Asian option pricing without dividends. The data used is the stock daily closing data of Telkom from January 1 2016 to June 30 2016. Finnaly, those option price can be used as an option trading strategy.

Decision analysis and drug development portfolio management: uncovering the real options value of your projects.

PubMed

Rosati, Nicoletta

2002-04-01

Project selection and portfolio management are particularly challenging in the pharmaceutical industry due to the high risk - high stake nature of the drug development process. In the recent years, scholars and industry experts have agreed that traditional Net-Present-Value evaluation of the projects fails to capture the value of managerial flexibility, and encouraged adopting a real options approach to recover the missed value. In this paper, we take a closer look at the drug development process and at the indices currently used to rank projects. We discuss the economic value of information and of real options arising in drug development and present decision analysis as an ideal framework for the implementation of real options valuation.

Optimizing spacecraft design - optimization engine development : progress and plans

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Feather, Martin S.; Dunphy, Julia R; Salcedo, Jose; Menzies, Tim

2003-01-01

At JPL and NASA, a process has been developed to perform life cycle risk management. This process requires users to identify: goals and objectives to be achieved (and their relative priorities), the various risks to achieving those goals and objectives, and options for risk mitigation (prevention, detection ahead of time, and alleviation). Risks are broadly defined to include the risk of failing to design a system with adequate performance, compatibility and robustness in addition to more traditional implementation and operational risks. The options for mitigating these different kinds of risks can include architectural and design choices, technology plans and technology back-up options, test-bed and simulation options, engineering models and hardware/software development techniques and other more traditional risk reduction techniques.

Development of a rapidly deployed Department of Energy emergency response element.

PubMed

Tighe, R J; Riland, C A; Hopkins, R C

2000-02-01

The Federal Radiological Emergency Response Plan (FRERP) directs the Department of Energy (DOE) to maintain a viable, timely, and fully documented response option capable of supporting the responsible Lead Federal Agency in the event of a radiological emergency impacting any state or United States territory (e.g., CONUS). In addition, the DOE maintains a response option to support radiological emergencies outside the continental United States (OCONUS). While the OCONUS mission is not governed by the FRERP, this response is operationally similar to that assigned to the DOE by the FRERP The DOE is prepared to alert, activate, and deploy radiological response teams to augment the Radiological Assistance Program and/or local responders. The Radiological Monitoring and Assessment Center (RMAC) is a phased response that integrates with the Federal Radiological Monitoring and Assessment Center (FRMAC) in CONUS environments and represents a stand-alone DOE response for OCONUS environments. The FRMAC/RMAC Phase I was formally "stood up" as an operational element in April 1999. The FRMAC/RMAC Phase II proposed "stand-up" date is midyear 2000.

Emerging pharmacological therapies in schizophrenia: what's new, what's different, what's next?

PubMed

Citrome, Leslie

2016-12-01

There are several new and emerging medication interventions for both the acute and maintenance treatment phases of schizophrenia. Recently approved are 2 new dopamine receptor partial agonists, brexpiprazole and cariprazine, as well as 2 new long-acting injectable antipsychotic formulations, aripiprazole lauroxil and 3-month paliperidone palmitate. Although differences in efficacy compared to other available choices are not expected, the new oral options offer different tolerability profiles that may be attractive for individual patients who have had difficulties with older medications. The new long-acting injectable options provide additional flexibility in terms of increasing the time interval between injections. In Phase III of clinical development is a novel antipsychotic, lumateperone (ITI-007), that appears to have little in the way of significant adverse effects. Deutetrabenazine and valbenazine are agents in Phase III for the treatment of tardive dyskinesia, a condition that can be found among persons receiving chronic antipsychotic therapy. On the horizon are additional injectable formulations of familiar antipsychotics, aripiprazole and risperidone, that may be more convenient than what is presently available.

Responding to climate change in national forests: a guidebook for developing adaptation options

Treesearch

David L. Peterson; Connie I. Millar; Linda A. Joyce; Michael J. Furniss; Jessica E. Halofsky; Ronald P. Neilson; Toni Lyn Morelli

2011-01-01

This guidebook contains science-based principles, processes, and tools necessary to assist with developing adaptation options for national forest lands. The adaptation process is based on partnerships between local resource managers and scientists who work collaboratively to understand potential climate change effects, identify important resource issues, and develop...

Climate Neutral Research Campuses | NREL

Science.gov Websites

the background. Set an example for climate neutrality. Use NREL's climate action planning process and more. Climate Action Planning Process Identify the best technology options for a climate action plan . Climate Action Planning Tool Identify the best technology options for a climate action plan. Technology

Recovery of toxic metal ions from washing effluent containing excess aminopolycarboxylate chelant in solution.

PubMed

Hasegawa, Hiroshi; Rahman, Ismail M M; Nakano, Masayoshi; Begum, Zinnat A; Egawa, Yuji; Maki, Teruya; Furusho, Yoshiaki; Mizutani, Satoshi

2011-10-15

Aminopolycarboxylate chelants (APCs) are extremely useful for a variety of industrial applications, including the treatment of toxic metal-contaminated solid waste materials. Because non-toxic matrix elements compete with toxic metals for the binding sites of APCs, an excess of chelant is commonly added to ensure the adequate sequestration of toxic metal contaminants during waste treatment operations. The major environmental impacts of APCs are related to their ability to solubilize toxic heavy metals. If APCs are not sufficiently eliminated from the effluent, the aqueous transport of metals can occur through the introduction of APCs into the natural environment, increasing the magnitude of associated toxicity. Although several techniques that focus primarily on the degradation of APCs at the pre-release step have been proposed, methods that recycle not only the processed water, but also provide the option to recover and reuse the metals, might be economically feasible, considering the high costs involved due to the chelants used in metal ion sequestration. In this paper, we propose a separation process for the recovery of metals from effluents that contain an excess of APCs. Additionally, the option of recycling the processed water using a solid phase extraction (SPE) system with an ion-selective immobilized macrocyclic material, commonly known as a molecular recognition technology (MRT) gel, is presented. Simulated effluents containing As(V), Cd(II), Cr(III), Pb(II) or Se(IV) in the presence of APCs at molar ratios of 1:50 in H2O were studied with a flow rate of 0.2 mL min(-1). The 'captured' ions in the SPE system were quantitatively eluted with HNO3. The effects of solution pH, metal-chelant stability constants and matrix elements were assessed. Better separation performance for the metals was achieved with the MRT-SPE compared to other SPE materials. Our proposed technique offers the advantage of a non-destructive separation of both metal ions and chelants compared to conventional treatment options for such effluents. Copyright © 2011 Elsevier Ltd. All rights reserved.

Measurements of Rationality: Individual Differences in Information Processing, the Transitivity of Preferences and Decision Strategies

PubMed Central

Sleboda, Patrycja; Sokolowska, Joanna

2017-01-01

The first goal of this study was to validate the Rational-Experiential Inventory (REI) and the Cognitive Reflection Test (CRT) through checking their relation to the transitivity axiom. The second goal was to test the relation between decision strategies and cognitive style as well as the relation between decision strategies and the transitivity of preferences. The following characteristics of strategies were investigated: requirements for trade-offs, maximization vs. satisficing and option-wise vs. attribute-wise information processing. Respondents were given choices between two multi-attribute options. The options were designed so that the choice indicated which strategy was applied. Both the REI-R and the CRT were found to be good predictors of the transitivity of preferences. Respondents who applied compensatory strategies and the maximization criterion scored highly on the REI-R and in the CRT, whereas those who applied the satisficing rule scored highly on the REI-R but not in the CRT. Attribute-wise information processing was related to low scores in both measurements. Option-wise information processing led to a high transitivity of preferences. PMID:29093695

Measurements of Rationality: Individual Differences in Information Processing, the Transitivity of Preferences and Decision Strategies.

PubMed

Sleboda, Patrycja; Sokolowska, Joanna

2017-01-01

The first goal of this study was to validate the Rational-Experiential Inventory ( REI ) and the Cognitive Reflection Test ( CRT ) through checking their relation to the transitivity axiom. The second goal was to test the relation between decision strategies and cognitive style as well as the relation between decision strategies and the transitivity of preferences. The following characteristics of strategies were investigated: requirements for trade-offs, maximization vs. satisficing and option-wise vs. attribute-wise information processing. Respondents were given choices between two multi-attribute options. The options were designed so that the choice indicated which strategy was applied. Both the REI-R and the CRT were found to be good predictors of the transitivity of preferences. Respondents who applied compensatory strategies and the maximization criterion scored highly on the REI-R and in the CRT , whereas those who applied the satisficing rule scored highly on the REI-R but not in the CRT . Attribute-wise information processing was related to low scores in both measurements. Option-wise information processing led to a high transitivity of preferences.

Information systems for material flow management in construction processes

NASA Astrophysics Data System (ADS)

Mesároš, P.; Mandičák, T.

2015-01-01

The article describes the options for the management of material flows in the construction process. Management and resource planning is one of the key factors influencing the effectiveness of construction project. It is very difficult to set these flows correctly. The current period offers several options and tools to do this. Information systems and their modules can be used just for the management of materials in the construction process.

Comparison of different target material options for the European Spallation Source based on certain aspects related to the final disposal

NASA Astrophysics Data System (ADS)

Kókai, Zsófia; Török, Szabina; Zagyvai, Péter; Kiselev, Daniela; Moormann, Rainer; Börcsök, Endre; Zanini, Luca; Takibayev, Alan; Muhrer, Günter; Bevilacqua, Riccardo; Janik, József

2018-02-01

Different target options have been examined for the European Spallation Source, which is under construction in Lund, Sweden. During the design update phase, parameters and characteristics for the target design have been optimized not only for neutronics but also with respect to the waste characteristics related to the final disposal of the target. A rotating, solid tungsten target was eventually selected as baseline concept; the other options considered included mercury and lead-bismuth (LBE) targets suitable for a pulsed source. Since the licensee is obliged to present a decommissioning plan even before the construction phase starts, the radioactive waste category of the target after full operation time is of crucial importance. The results obtained from a small survey among project partners of 7th Framework Program granted by EU 202247 contract have been used. Waste characteristics of different potential spallation target materials were compared. Based on waste index, the tungsten target is the best alternative and the second one is the mercury target. However, all alternatives have HLW category after a 10 year cooling. Based on heat generation alone all of the options would be below the HLW limit after this cooling period. The LBE is the least advantageous alternative based on waste index and heat generation comparison. These results can be useful in compiling the licensing documents of the ESS facility as the target alternatives can be compared from various aspects related to their disposal.

Microdosing and Other Phase 0 Clinical Trials: Facilitating Translation in Drug Development.

PubMed

Burt, T; Yoshida, K; Lappin, G; Vuong, L; John, C; de Wildt, S N; Sugiyama, Y; Rowland, M

2016-04-01

A number of drivers and developments suggest that microdosing and other phase 0 applications will experience increased utilization in the near-to-medium future. Increasing costs of drug development and ethical concerns about the risks of exposing humans and animals to novel chemical entities are important drivers in favor of these approaches, and can be expected only to increase in their relevance. An increasing body of research supports the validity of extrapolation from the limited drug exposure of phase 0 approaches to the full, therapeutic exposure, with modeling and simulations capable of extrapolating even non-linear scenarios. An increasing number of applications and design options demonstrate the versatility and flexibility these approaches offer to drug developers including the study of PK, bioavailability, DDI, and mechanistic PD effects. PET microdosing allows study of target localization, PK and receptor binding and occupancy, while Intra-Target Microdosing (ITM) allows study of local therapeutic-level acute PD coupled with systemic microdose-level exposure. Applications in vulnerable populations and extreme environments are attractive due to the unique risks of pharmacotherapy and increasing unmet healthcare needs. All phase 0 approaches depend on the validity of extrapolation from the limited-exposure scenario to the full exposure of therapeutic intent, but in the final analysis the potential for controlled human data to reduce uncertainty about drug properties is bound to be a valuable addition to the drug development process.

Short rendezvous missions for advanced Russian human spacecraft

NASA Astrophysics Data System (ADS)

Murtazin, Rafail F.; Budylov, Sergey G.

2010-10-01

The two-day stay of crew in a limited inhabited volume of the Soyuz-TMA spacecraft till docking to ISS is one of the most stressful parts of space flight. In this paper a number of possible ways to reduce the duration of the free flight phase are considered. The duration is defined by phasing strategy that is necessary for reduction of the phase angle between the chaser and target spacecraft. Some short phasing strategies could be developed. The use of such strategies creates more comfortable flight conditions for crew thanks to short duration and additionally it allows saving spacecraft's life support resources. The transition from the methods of direct spacecraft rendezvous using one orbit phasing (first flights of " Vostok" and " Soyuz" vehicles) to the currently used methods of two-day rendezvous mission can be observed in the history of Soviet manned space program. For an advanced Russian human rated spacecraft the short phasing strategy is recommended, which can be considered as a combination between the direct and two-day rendezvous missions. The following state of the art technologies are assumed available: onboard accurate navigation; onboard computations of phasing maneuvers; launch vehicle with high accuracy injection orbit, etc. Some operational requirements and constraints for the strategies are briefly discussed. In order to provide acceptable phase angles for possible launch dates the experience of the ISS altitude profile control can be used. As examples of the short phasing strategies, the following rendezvous missions are considered: direct ascent, short mission with the phasing during 3-7 orbits depending on the launch date (nominal or backup). For each option statistical modeling of the rendezvous mission is fulfilled, as well as an admissible phase angle range, accuracy of target state vector and addition fuel consumption coming out of emergency is defined. In this paper an estimation of pros and cons of all options is conducted.

Transportation: Destination Mars

NASA Technical Reports Server (NTRS)

Eoff, Bill

1998-01-01

As the agency space transportation lead center, Marshall Space Flight Center has been conducting transportation assessments for future robotic and human Mars missions to identify critical technologies. Five human Mars options are currently under assessment with each option including all transportation requirements from Earth to Mars and return. The primary difference for each option is the propulsion source from Earth to Mars. In case any of the options require heavy launch capability that is not currently projected as available, an in-house study has been initiated to determine the most cost effective means of providing such launch capability. This assessment is only considering launch architectures that support the overall human Mars mission cost goal of $25B. The guidelines for the launch capability study included delivery of 80 metric ton (176 KLB) payloads, 25 feet diameter x 92 feet long, to 220 nmi orbits at 28.5 degrees. The launch vehicle concept of the study was designated "Magnum" to differentiate from prior heavy launch vehicle assessments. This assessment along with the assessment of options for all transportation phases of a Mars mission are on-going.

Environmental assessment of energy generation from agricultural and farm waste through anaerobic digestion.

PubMed

Nayal, Figen Sisman; Mammadov, Aydin; Ciliz, Nilgun

2016-12-15

While Turkey is one of the world's largest producers and exporters of agricultural goods, it is also, at the same time a net importer of energy carriers. This dichotomy offers a strong incentive to generate energy from agricultural and farming waste; something which could provide energy security for rural areas. Combined with the enhanced energy security for farming areas, the production of energy in this manner could conceivably contribute to the overall national effort to reduce the Turkey's carbon footprint. This study explores the environmental benefits and burdens of one such option, that is, biogas production from a mixture of agricultural and animal waste through anaerobic digestion (AD), and its subsequent use for electricity and heat generation. A life-cycle assessment methodology was used, to measure the potential environmental impact of this option, in terms of global warming and total weighed impact, and to contrast it with the impact of producing the same amount of energy via an integrated gasification combined cycle process and a hard coal power plant. This study concentrates on an AD and cogeneration pilot plant, built in the Kocaeli province of Turkey and attempts to evaluate its potential environmental impacts. The study uses laboratory-scale studies, as well as literature and LCI databases to derive the operational parameters, yield and emissions of the plant. The potential impacts were calculated with EDIP 2003 methodology, using GaBi 5 LCA software. The results indicate that N 2 O emissions, resulting from the application of liquid and solid portions of digestate (a by-product of AD), as an organic fertilizer, are by far the largest contributors to global warming among all the life cycle stages. They constitute 68% of the total, whereas ammonia losses from the same process are the leading cause of terrestrial eutrophication. The photochemical ozone formation potential is significantly higher for the cogeneration phase, compared to other life cycle stages of the proposed scenario, due to NO x being emitted from the gas engine during combustion. Overall, the total environmental impact of the option was determined to be ten times lower than that of a hard coal option and 50% lower than the gasification option, since the latter does not generate digestate that is able to replace mineral fertilizer, thus mitigating the environmental footprint. Finally, the sustainability of energy production from agricultural and farm waste, via AD, was further enhanced by eliminating it from conventional waste management system practiced in the region, i.e. landfilling. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of in-situ control diagnostics for application of epitaxial superconductor and buffer layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

B.C. Winkleman; T.V. Giel; Jason Cunningham

1999-07-30

The recent achievements of critical currents in excess of 1 x 10{sup 6} amp/cm{sup 2} at 77 K in YBCO deposited over suitably textured buffer/substrate composites have stimulated interest in the potential fabrication of these coated conductors as wire. Numerous approaches and manufacturing schemes for producing coated conductor wire are currently being developed. Recently, under the US DOE's sponsorship, the University of Tennessee Space Institute performed an extensive evaluation of leading coated conductor processing options. In general, it is their feeling that the science and chemistry that are being developed in the coated conductor wire program now need proper engineeringmore » evaluation to define the most viable options for a commercial fabrication process. All fabrication processes will need process control measurements. This report provides a specific review of the needs and available technologies for process control for many of the coated conductor processing options. This report also addresses generic process monitoring areas in which additional research and development is needed. The concentration is on the two different approaches for obtaining the textured substrates that have been identified as viable candidates. These are the Los Alamos National Laboratory's ion-beam assisted deposition, called IBAD, to obtain a highly textured yttria-stabilized zirconia (YSZ) buffer on nickel alloy strips, and Oak Ridge National Laboratory's rolling assisted, bi-axially textured substrate option called RABiTS{trademark}.« less

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes.

PubMed

Nunez, C M; Ramsey, G H; Kong, E J; Bahner, M A; Wright, R S; Clayton, C A; Baskir, J N

1999-03-01

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.

Sub state Unconventional Warfare: Expanding United States Military Political Options

DTIC Science & Technology

2016-05-26

phases due to competing incumbent efforts. Giap was influenced in his understanding of revolutionary war phasing by Sun Tzu who Giap called one of his...Challenge of Unconventional Warfare. London: Routledge, 2012. Ames, Roger T. Sun - Tzu The Art of Warfare. New York: Ballantine Books, 1993. Amin, Samir...Guerrilla: Insurgents, Patriots, and Terrorists from Sun Tzu to Bin Laden. London: Brassey’s Inc., 2004. Rosenau, William, Subversion and Insurgency

Original research: Giving sexual assault survivors time to decide: an exploration of the use and effects of the nonreport option.

PubMed

Heffron, Laurie Cook; Busch-Armendariz, Noël Bridget; Vohra, Shetal S; Johnson, Regina Jones; Camp, Victoria

2014-03-01

Forensic nurses, sexual assault nurse examiners (SANEs), and victim advocates have long recognized the trauma of sexual assault crimes and the significance of survivors' decisions around reporting these crimes to law enforcement agencies. Until recently, survivors who didn't report the crime were not entitled to a free medical forensic examination. In a significant policy shift, the Violence Against Women and Department of Justice Reauthorization Act of 2005 provided an additional decision option with regard to the medical examination for survivors of sexual assault. This provision, referred to here as the nonreport option, was established to offer survivors a full range of reporting options and to ensure exemplary health care, with evidence collection as an important secondary goal. This study sought to examine the implementation of the nonreport option in Texas; explore its impact on SANEs, survivors, and the criminal justice system; and identify strengths and challenges of the nonreport process. A mixed-method approach was used that included qualitative interviews with 79 professionals who regularly respond to sexual assault crimes, a Web-based survey questionnaire of such professionals that yielded 131 completed surveys, and a review of existing data. The step-by-step process involved in a nonreport case was described, and findings in three descriptive areas emerged: confidentiality processes, storage and shipment of evidence, and the use of the nonreport option. Beneficial effects of the nonreport option were identified in five areas: the role of SANEs, the impact on survivors, collaborative relationships, collateral crimes, and anonymous reporting strategies. Seven areas of remaining dilemmas were also identified. Findings indicate that the nonreport option has had a considerable positive impact on SANEs, survivors of sexual assault, and the criminal justice system. But challenges remain if this option is to be fully utilized in the future; further research is warranted. The authors also present recommendations to improve health care delivery.

Separation of porcine parvovirus from bovine serum albumin using PEG-salt aqueous two-phase system.

PubMed

Vijayaragavan, K Saagar; Zahid, Amna; Young, Jonathan W; Heldt, Caryn L

2014-09-15

Vaccine production faces a challenge in adopting conventional downstream processing steps that can efficiently purify large viral particles. Some major issues that plague vaccine purification are purity, potency, and quality. The industry currently considers 30% as an acceptable virus recovery for a vaccine purification process, including all downstream processes, whereas antibody recovery from CHO cell culture is generally around 80-85%. A platform technology with an improved virus recovery would revolutionize vaccine production. In a quest to fulfill this goal, we have been exploring aqueous two-phase systems (ATPSs) as an optional mechanism to purify virus. ATPS has been unable to gain wide implementation mainly due to loss of virus infectivity, co-purification of proteins, and difficulty of polymer recycling. Non-enveloped viruses are chemically resistant enough to withstand the high polymer and salt concentrations that are required for effective ATPS separations. We used infectious porcine parvovirus (PPV), a non-enveloped, DNA virus as a model virus to test and develop an ATPS separation method. We successfully tackled two of the three main disadvantages of ATPS previously stated; we achieved a high infectious yield of 64% in a PEG-citrate ATPS process while separating out the main contaminate protein, bovine serum albumin (BSA). The most dominant forces in the separation were biomolecule charge, virus surface hydrophobicity, and the ATPS surface tension. Highly hydrophobic viruses are likely to benefit from the discovered ATPS for high-purity vaccine production and ease of implementation. Copyright © 2014 Elsevier B.V. All rights reserved.

The tale of hearts and reason: the influence of mood on decision making.

PubMed

Laborde, Sylvain; Raab, Markus

2013-08-01

In decision-making research, one important aspect of real-life decisions has so far been neglected: the mood of the decision maker when generating options. The authors tested the use of the take-the-first (TTF) heuristic and extended the TTF model to understand how mood influences the option-generation process of individuals in two studies, the first using a between-subjects design (30 nonexperts, 30 near-experts, and 30 experts) and the second conceptually replicating the first using a within-subject design (30 nonexperts). Participants took part in an experimental option-generation task, with 31 three-dimensional videos of choices in team handball. Three moods were elicited: positive, neutral, and negative. The findings (a) replicate previous results concerning TTF and (b) show that the option-generation process was associated with the physiological component of mood, supporting the neurovisceral integration model. The extension of TTF to processing emotional factors is an important step forward in explaining fast choices in real-life situations.

Finding the Funds for Technology.

ERIC Educational Resources Information Center

Wodarz, Nan

1996-01-01

Describes strategies to meet the increasing demands for technological innovation in the face of increasingly severe budgetary constraints. Long-term planning is the key to a successful technological program. Describes the options of leasing, financing, and phased-in purchases. (LMI)

Overlooked density : re-thinking transportation options in suburbia, phase II.

DOT National Transportation Integrated Search

2011-03-01

Comprising over 9 million units in this country, suburban multifamily housing is a widespread and overlooked example of density located : within walking distance to commercial development in suburbia. This report focuses on resident demographics, att...

Roadwaste management : field trials : final report.

DOT National Transportation Integrated Search

2001-03-01

The Oregon Department of Transportation is concluding a study on roadwaste management. The first phase of the study provided a thorough regulatory analysis and synthesis of known fact compiled in Roadwaste: Issues and Options. The main emphasis of th...

Methods for validating the presence of and characterizing proteins deposited onto an array

DOEpatents

Schabacker, Daniel S.

2010-09-21

A method of determining if proteins have been transferred from liquid-phase protein fractions to an array comprising staining the array with a total protein stain and imaging the array, optionally comparing the staining with a standard curve generated by staining known amounts of a known protein on the same or a similar array; a method of characterizing proteins transferred from liquid-phase protein fractions to an array including staining the array with a post-translational modification-specific (PTM-specific) stain and imaging the array and, optionally, after staining the array with a PTM-specific stain and imaging the array, washing the array, re-staining the array with a total protein stain, imaging the array, and comparing the imaging with the PTM-specific stain with the imaging with the total protein stain; stained arrays; and images of stained arrays.

Lessons Learned From Early Implementation of Option B+: The Elizabeth Glaser Pediatric AIDS Foundation Experience in 11 African Countries

PubMed Central

Mattingly, Meghan; Giphart, Anja; van de Ven, Roland; Chouraya, Caspian; Walakira, Moses; Boon, Alexandre; Mikusova, Silvia; Simonds, R. J.

2014-01-01

Background: “Option B+” is a World Health Organization-recommended approach to prevent mother-to-child HIV transmission whereby all HIV-positive pregnant and lactating women initiate lifelong antiretroviral therapy (ART). This review of early Option B+ implementation experience is intended to inform Ministries of Health and others involved in implementing Option B+. Methods: This implementation science study analyzed data from 11 African countries supported by the Elizabeth Glaser Pediatric AIDS Foundation (EGPAF) to describe early experience implementing Option B+. Data are from 4 sources: (1) national guidelines for prevention of mother-to-child HIV transmission and Option B+ implementation plans, (2) aggregated service delivery data between January 2013 and March 2014 from EGPAF-supported sites, (3) field visits to Option B+ implementation sites, and (4) relevant EGPAF research, quality improvement, and evaluation studies. Results: Rapid adoption of Option B+ led to large increases in percentage of HIV-positive pregnant women accessing ART in antenatal care. By the end of 2013, most programs reached at least 50% of HIV-positive women in antenatal care with ART, even in countries using a phased approach to implementation. Scaling up Option B+ through integrating ART in maternal and child health settings has required expansion of the workforce, and task shifting to allow nurse-led ART initiation has created staffing pressure on lower-level cadres for counseling and community follow-up. Complex data collection needs may be impairing data quality. Discussion: Early experiences with Option B+ implementation demonstrate promise. Continued program evaluation is needed, as is specific attention to counseling and support around initiation of lifetime ART in the context of pregnancy and lactation. PMID:25436817

Lessons learned from early implementation of option B+: the Elizabeth Glaser Pediatric AIDS Foundation experience in 11 African countries.

PubMed

Kieffer, Mary Pat; Mattingly, Meghan; Giphart, Anja; van de Ven, Roland; Chouraya, Caspian; Walakira, Moses; Boon, Alexandre; Mikusova, Silvia; Simonds, R J

2014-12-01

"Option B+" is a World Health Organization-recommended approach to prevent mother-to-child HIV transmission whereby all HIV-positive pregnant and lactating women initiate lifelong antiretroviral therapy (ART). This review of early Option B+ implementation experience is intended to inform Ministries of Health and others involved in implementing Option B+. This implementation science study analyzed data from 11 African countries supported by the Elizabeth Glaser Pediatric AIDS Foundation (EGPAF) to describe early experience implementing Option B+. Data are from 4 sources: (1) national guidelines for prevention of mother-to-child HIV transmission and Option B+ implementation plans, (2) aggregated service delivery data between January 2013 and March 2014 from EGPAF-supported sites, (3) field visits to Option B+ implementation sites, and (4) relevant EGPAF research, quality improvement, and evaluation studies. Rapid adoption of Option B+ led to large increases in percentage of HIV-positive pregnant women accessing ART in antenatal care. By the end of 2013, most programs reached at least 50% of HIV-positive women in antenatal care with ART, even in countries using a phased approach to implementation. Scaling up Option B+ through integrating ART in maternal and child health settings has required expansion of the workforce, and task shifting to allow nurse-led ART initiation has created staffing pressure on lower-level cadres for counseling and community follow-up. Complex data collection needs may be impairing data quality. Early experiences with Option B+ implementation demonstrate promise. Continued program evaluation is needed, as is specific attention to counseling and support around initiation of lifetime ART in the context of pregnancy and lactation.

Electricity pricing policy: A neo-institutional, developmental and cross-national policy design map

NASA Astrophysics Data System (ADS)

Koundinya, Sridarshan Umesh

This dissertation explores the role of ideas and ideology in the mental policy design maps of regulators in the US and in India. The research approach is to describe the regulatory design process in the history of the US electric industry from a neo-institutional and developmental perspective. And then to use the insights of such a study to suggest policy options to a sample of Indian experts. A regulatory process model explores the interactions among normative values, regulatory instruments and historical phases in policy design. A spectrum of seven regulatory instruments--subsidized rates, average cost pricing, marginal cost pricing, time-of-use pricing, ramsey pricing, incentive regulation and spot pricing is examined. A neo-institutional perspective characterizes the process of institutionalizing these regulatory instruments as a design process that infuses them with values beyond mere technical requirements. The process model includes normative values such as efficiency, fairness, free choice and political feasibility. These values arise from an analytical classification of various market metaphors debated in the history of economic thought. The theory of development and co-evolution applied to the history of electricity regulation yields a typology of evolutionary phases in the US. The typology describes hierarchically emergent relationships between supply and demand and among the normative values. The theory hypothesizes technologically contingent relationships between pricing policies and normative values in the historical phases of dependence (or rural), independence (or urban) and interdependence (or informational). The contents of this model are represented as related elements in a policy design map that simplifies the process of designing regulatory instruments in the US. This neo-institutional, developmental policy design map was used to design a survey instrument. The survey was conducted among electricity experts in India to test the hypothesized inter-relationships among various elements at different levels of the policy design map in a cross-national context. The study adds value with a comprehensive design map that helps to organize and give coherence to the policy prescriptions made by Indian experts as they converge on one institutional model. Thus the dissertation contributes to the transfer of knowledge about regulatory practice from the US to India.

Management options for recycling radioactive scrap metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dehmel, J.C.; MacKinney, J.; Bartlett, J.

1997-02-01

The feasibility and advantages of recycling radioactive scrap metals (RSM) have yet to be assessed, given the unique technical, regulatory, safety, and cost-benefit issues that have already been raised by a concerned recycling industry. As is known, this industry has been repeatedly involved with the accidental recycling of radioactive sources and, in some cases, with costly consequences. If recycling were deemed to be a viable option, it might have to be implemented with regulatory monitoring and controls. Its implementation may have to consider various and complex issues and address the requirements and concerns of distinctly different industries. There are threemore » basic options for the recycling of such scraps. They are: (1) recycling through the existing network of metal-scrap dealers and brokers, (2) recycling directly and only with specific steelmills, or (3) recycling through regional processing centers. Under the first option, scrap dealers and brokers would receive material from RSM generators and determine at which steelmills such scraps would be recycled. For the second option, RSM generators would deal directly with selected steelmills under specific agreements. For the third option, generators would ship scraps only to regional centers for processing and shipment to participating steelmills. This paper addresses the potential advantages of each option, identifies the types of arrangements that would need to be secured among all parties, and attempts to assess the receptivity of the recycling industry to each option.« less

Strategic considerations in SETI, and a microwave approach. [Search for ExtraTerrestrial Intelligence

NASA Technical Reports Server (NTRS)

Seeger, C. L.

1977-01-01

Plausible options in the search for extraterrestrial intelligence (SETI), and the need to reserve a suitable portion of the EM (microwave) spectrum for SETI research, are discussed. Reasons for selection of a portion of the spectrum, specifically the 'water hole' near 1.5 GHz in the terrestrial microwave window (1-25 GHz), are presented, and competition with various emitters for that band (existing satellite downlink transmissions) is discussed. SETI search policies and options are summarized in a table. Speculative considerations guiding initial phases of the SETI pursuit are discussed.

The history and progression of treatments for allergic rhinitis.

PubMed

Ostrom, Nancy K

2014-01-01

This article intends to place new treatments in the context of allergic rhinitis (AR) treatment history. The medical literature was searched for significant advances and changes in AR treatment. Historical data on AR treatment options and management were selected. Reviews of AR management published throughout the 20th century were included to provide context for treatment advances. Modern AR treatment began in the early 20th century with immunotherapy and was soon followed by the emergence of antihistamine therapy in the 1930s. Numerous treatments for AR have been used over the ensuing decades, including decongestants, mast cell stabilizers, and leukotriene receptor antagonists. Topical corticosteroid options were developed the 1950s, and, added to baseline antihistamine therapy, became the foundation of AR treatment. Treatment options were significantly impacted after the 1987 Montreal Protocol, which phased out the use of chlorofluorocarbon propellant aerosols because of environmental concerns. From the mid-1990s until recently, this left only aqueous solution options for intranasal corticosteroids (INSs). The approval of the first hydrofluoroalkane propellant aerosol INSs for AR in 2012 restored a "dry" aerosol treatment option. The first combination intranasal antihistamine/INSs was also approved in 2012, providing a novel treatment option for AR. Treatment of AR has progressed with new therapeutic options now available. This should continue to move forward with agents to alter the allergic mechanism itself and impact the disease burden that has a significant impact on patient outcomes.

Transitioning from conceptual design to construction performance specification

NASA Astrophysics Data System (ADS)

Jeffers, Paul; Warner, Mark; Craig, Simon; Hubbard, Robert; Marshall, Heather

2012-09-01

On successful completion of a conceptual design review by a funding agency or customer, there is a transition phase before construction contracts can be placed. The nature of this transition phase depends on the Project's approach to construction and the particular subsystem being considered. There are generically two approaches; project retention of design authority and issuance of build to print contracts, or issuance of subsystem performance specifications with controlled interfaces. This paper relates to the latter where a proof of concept (conceptual or reference design) is translated into performance based sub-system specifications for competitive tender. This translation is not a straightforward process and there are a number of different issues to consider in the process. This paper deals with primarily the Telescope mount and Enclosure subsystems. The main subjects considered in this paper are: • Typical status of design at Conceptual Design Review compared with the desired status of Specifications and Interface Control Documents at Request for Quotation. • Options for capture and tracking of system requirements flow down from science / operating requirements and sub-system requirements, and functional requirements derived from reference design. • Requirements that may come specifically from the contracting approach. • Methods for effective use of reference design work without compromising a performance based specification. • Management of project team's expectation relating to design. • Effects on cost estimates from reference design to actual. This paper is based on experience and lessons learned through this process on both the VISTA and the ATST projects.

Solvent extraction of organic acids from stillage for its re-use in ethanol production process.

PubMed

Castro, G A; Caicedo, L A; Alméciga-Díaz, C J; Sanchez, O F

2010-06-01

Stillage re-use in the fermentation stage in ethanol production is a technique used for the reduction of water and fermentation nutrients consumption. However, the inhibitory effect on yeast growth of the by-products and feed components that remains in stillage increases with re-use and reduces the number of possible recycles. Several methods such as ultrafiltration, electrodialysis and advanced oxidation processes have been used in stillage treatment prior its re-use in the fermentation stage. Nevertheless, few studies evaluating the effect of solvent extraction as a stillage treatment option have been performed. In this work, the inhibitory effect of serial stillage recycling over ethanol and biomass production was determined, using acetic acid as a monitoring compound during the fermentation and solvent extraction process. Raw palm oil methyl ester showed the highest acetic acid extraction from the aqueous phase, presenting a distribution coefficient of 3.10 for a 1:1 aqueous phase mixture:solvent ratio. Re-using stillage without treatment allowed up to three recycles with an ethanol production of 53.7 +/- 2.0 g L(-1), which was reduced 25% in the fifth recycle. Alternatively, treated stillage allowed up to five recycles with an ethanol final concentration of 54.7 +/- 1.3 g L(- 1). These results show that reduction of acetic acid concentration by an extraction process with raw palm oil methyl ester before re-using stillage improves the number of recycles without a major effect on ethanol production. The proposed process generates a palm oil methyl ester that contains organic acids, among other by-products, that could be used for product recovery and as an alternative fuel.

77 FR 4844 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Approving a...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-66235; File No. SR-CBOE-2011-114] Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Approving a Proposed Rule Change Relating to Complex Order Processing in Hybrid 3.0 Classes January 25, 2012. I. Introduction On November 29, 2011, the Chicago Board Options...

Spinel formation for stabilizing simulated nickel-laden sludge with aluminum-rich ceramic precursors.

PubMed

Shih, Kaimin; White, Tim; Leckie, James O

2006-08-15

The feasibility of stabilizing nickel-laden sludge from commonly available Al-rich ceramic precursors was investigated and accomplished with high nickel incorporation efficiency. To simulate the process, nickel oxide was mixed alternatively with gamma-alumina, corundum, kaolinite, and mullite and was sintered from 800 to 1480 degrees C. The nickel aluminate spinel (NiAl2O4) was confirmed as the stabilization phase for nickel and crystallized with efficiencies greater than 90% for all precursors above 1250 degrees C and 3-h sintering. The nickel-incorporation reaction pathways with these precursors were identified, and the microstructure and spinel yield were investigated as a function of sintering temperature with fixed sintering time. This study has demonstrated a promising process for forming nickel spinel to stabilize nickel-laden sludge from a wide range of inexpensive ceramic precursors, which may provide an avenue for economically blending waste metal sludges via the building industry processes to reduce the environmental hazards of toxic metals. The correlation of product textures and nickel incorporation efficiencies through selection of different precursors also provides the option of tailoring property-specific products.

3D active edge silicon sensors: Device processing, yield and QA for the ATLAS-IBL production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Da Vià, Cinzia; Boscardil, Maurizio; Dalla Betta, GianFranco

2013-01-01

3D silicon sensors, where plasma micromachining is used to etch deep narrow apertures in the silicon substrate to form electrodes of PIN junctions, were successfully manufactured in facilities in Europe and USA. In 2011 the technology underwent a qualification process to establish its maturity for a medium scale production for the construction of a pixel layer for vertex detection, the Insertable B-Layer (IBL) at the CERN-LHC ATLAS experiment. The IBL collaboration, following that recommendation from the review panel, decided to complete the production of planar and 3D sensors and endorsed the proposal to build enough modules for a mixed IBLmore » sensor scenario where 25% of 3D modules populate the forward and backward part of each stave. The production of planar sensors will also allow coverage of 100% of the IBL, in case that option was required. This paper will describe the processing strategy which allowed successful 3D sensor production, some of the Quality Assurance (QA) tests performed during the pre-production phase and the production yield to date.« less

Analytical control test plan and microbiological methods for the water recovery test

NASA Technical Reports Server (NTRS)

Traweek, M. S. (Editor); Tatara, J. D. (Editor)

1994-01-01

Qualitative and quantitative laboratory results are important to the decision-making process. In some cases, they may represent the only basis for deciding between two or more given options or processes. Therefore, it is essential that handling of laboratory samples and analytical operations employed are performed at a deliberate level of conscientious effort. Reporting erroneous results can lead to faulty interpretations and result in misinformed decisions. This document provides analytical control specifications which will govern future test procedures related to all Water Recovery Test (WRT) Phase 3 activities to be conducted at the National Aeronautics and Space Administration/Marshall Space Flight Center (NASA/MSFC). This document addresses the process which will be used to verify analytical data generated throughout the test period, and to identify responsibilities of key personnel and participating laboratories, the chains of communication to be followed, and ensure that approved methodology and procedures are used during WRT activities. This document does not outline specifics, but provides a minimum guideline by which sampling protocols, analysis methodologies, test site operations, and laboratory operations should be developed.

What is the Final Verification of Engineering Requirements?

NASA Technical Reports Server (NTRS)

Poole, Eric

2010-01-01

This slide presentation reviews the process of development through the final verification of engineering requirements. The definition of the requirements is driven by basic needs, and should be reviewed by both the supplier and the customer. All involved need to agree upon a formal requirements including changes to the original requirements document. After the requirements have ben developed, the engineering team begins to design the system. The final design is reviewed by other organizations. The final operational system must satisfy the original requirements, though many verifications should be performed during the process. The verification methods that are used are test, inspection, analysis and demonstration. The plan for verification should be created once the system requirements are documented. The plan should include assurances that every requirement is formally verified, that the methods and the responsible organizations are specified, and that the plan is reviewed by all parties. The options of having the engineering team involved in all phases of the development as opposed to having some other organization continue the process once the design has been complete is discussed.

Pre-PDK block-level PPAC assessment of technology options for sub-7nm high-performance logic

NASA Astrophysics Data System (ADS)

Liebmann, L.; Northrop, G.; Facchini, M.; Riviere Cazaux, L.; Baum, Z.; Nakamoto, N.; Sun, K.; Chanemougame, D.; Han, G.; Gerousis, V.

2018-03-01

This paper describes a rigorous yet flexible standard cell place-and-route flow that is used to quantify block-level power, performance, and area trade-offs driven by two unique cell architectures and their associated design rule differences. The two architectures examined in this paper differ primarily in their use of different power-distribution-networks to achieve the desired circuit performance for high-performance logic designs. The paper shows the importance of incorporating block-level routability experiments in the early phases of design-technology co-optimization by reviewing a series of routing trials that explore different aspects of the technology definition. Since the electrical and physical parameters leading to critical process assumptions and design rules are unique to specific integration schemes and design objectives, it is understood that the goal of this work is not to promote one cell-architecture over another, but rather to convey the importance of exploring critical trade-offs long before the process details of the technology node are finalized to a point where a process design kit can be published.

Sustainability assessment of electrokinetic bioremediation compared with alternative remediation options for a petroleum release site.

PubMed

Gill, R T; Thornton, S F; Harbottle, M J; Smith, J W N

2016-12-15

Sustainable management practices can be applied to the remediation of contaminated land to maximise the economic, environmental and social benefits of the process. The Sustainable Remediation Forum UK (SuRF-UK) have developed a framework to support the implementation of sustainable practices within contaminated land management and decision making. This study applies the framework, including qualitative (Tier 1) and semi-quantitative (Tier 2) sustainability assessments, to a complex site where the principal contaminant source is unleaded gasoline, giving rise to a dissolved phase BTEX and MTBE plume. The pathway is groundwater migration through a chalk aquifer and the receptor is a water supply borehole. A hydraulic containment system (HCS) has been installed to manage the MTBE plume migration. The options considered to remediate the MTBE source include monitored natural attenuation (MNA), air sparging/soil vapour extraction (AS/SVE), pump and treat (PT) and electrokinetic-enhanced bioremediation (EK-BIO). A sustainability indictor set from the SuRF-UK framework, including priority indicator categories selected during a stakeholder engagement workshop, was used to frame the assessments. At Tier 1 the options are ranked based on qualitative supporting information, whereas in Tier 2 a multi-criteria analysis is applied. Furthermore, the multi-criteria analysis was refined for scenarios where photovoltaics (PVs) are included and amendments are excluded from the EK-BIO option. Overall, the analysis identified AS/SVE and EK-BIO as more sustainable remediation options at this site than either PT or MNA. The wider implications of this study include: (1) an appraisal of the management decision from each Tier of the assessment with the aim to highlight areas for time and cost savings for similar assessments in the future; (2) the observation that EK-BIO performed well against key indicator categories compared to the other intensive treatments; and (3) introducing methods to improve the sustainability of the EK-BIO treatment design (such as PVs) did not have a significant effect in this instance. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Option pricing for stochastic volatility model with infinite activity Lévy jumps

NASA Astrophysics Data System (ADS)

Gong, Xiaoli; Zhuang, Xintian

2016-08-01

The purpose of this paper is to apply the stochastic volatility model driven by infinite activity Lévy processes to option pricing which displays infinite activity jumps behaviors and time varying volatility that is consistent with the phenomenon observed in underlying asset dynamics. We specially pay attention to three typical Lévy processes that replace the compound Poisson jumps in Bates model, aiming to capture the leptokurtic feature in asset returns and volatility clustering effect in returns variance. By utilizing the analytical characteristic function and fast Fourier transform technique, the closed form formula of option pricing can be derived. The intelligent global optimization search algorithm called Differential Evolution is introduced into the above highly dimensional models for parameters calibration so as to improve the calibration quality of fitted option models. Finally, we perform empirical researches using both time series data and options data on financial markets to illustrate the effectiveness and superiority of the proposed method.

Bosutinib: a review of its use in patients with Philadelphia chromosome-positive chronic myelogenous leukemia.

PubMed

Syed, Yahiya Y; McCormack, Paul L; Plosker, Greg L

2014-02-01

Bosutinib (Bosulif®) is an orally administered small molecule tyrosine kinase inhibitor (TKI) of BCR-ABL and SRC family kinases. It is indicated for the treatment of adult patients with chronic-, accelerated-, or blast-phase Philadelphia chromosome-positive (Ph+) chronic myelogenous leukemia (CML) with resistance or intolerance to prior therapy (imatinib, dasatinib, or nilotinib) [USA] or for a small subpopulation of these patients for whom imatinib, nilotinib, and dasatinib are not considered appropriate treatment options (EU). In a multinational pivotal trial (n = 547), bosutinib treatment resulted in a major cytogenetic response (MCyR) at 24 weeks in one-third of all treated patients with imatinib-resistant chronic-phase CML who had no previous exposure to any TKIs other than imatinib (primary endpoint), with similar results observed in chronic-phase CML patients who were intolerant of imatinib and naïve to all other TKIs. MCyRs were also seen in more than one-quarter of evaluable patients with chronic-phase CML previously treated with multiple TKIs. Most of the patients with chronic-phase CML achieved a complete hematologic response with bosutinib and some patients with advanced phases of CML achieved an overall hematologic response. Responses were seen irrespective of the type of BCR-ABL mutation at baseline, except T315I. Bosutinib had a manageable tolerability profile in the pivotal trial, with ≤21 % of patients with chronic-phase CML discontinuing the treatment because of adverse events. Diarrhea was the most common adverse event but was generally manageable, with only few patients discontinuing the treatment because of diarrhea. Therefore, bosutinib is a useful TKI option for patients with Ph+ CML in second-line or greater settings.

HYDRATE v1.5 OPTION OF TOUGH+ v1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moridis, George

HYDRATE v1.5 is a numerical code that for the simulation of the behavior of hydrate-bearing geologic systems, and represents the third update of the code since its first release [Moridis et al., 2008]. It is an option of TOUGH+ v1.5 [Moridis and Pruess, 2014], a successor to the TOUGH2 [Pruess et al., 1999, 2012] family of codes for multi-component, multiphase fluid and heat flow developed at the Lawrence Berkeley National Laboratory. HYDRATE v1.5 needs the TOUGH+ v1.5 core code in order to compile and execute. It is written in standard FORTRAN 95/2003, and can be run on any computational platformmore » (workstation, PC, Macintosh) for which such compilers are available. By solving the coupled equations of mass and heat balance, the fully operational TOUGH+HYDRATE code can model the non-isothermal gas release, phase behavior and flow of fluids and heat under conditions typical of common natural CH 4-hydrate deposits (i.e., in the permafrost and in deep ocean sediments) in complex geological media at any scale (from laboratory to reservoir) at which Darcy's law is valid. TOUGH+HYDRATE v1.5 includes both an equilibrium and a kinetic model of hydrate formation and dissociation. The model accounts for heat and up to four mass components, i.e., water, CH 4, hydrate, and water-soluble inhibitors such as salts or alcohols. These are partitioned among four possible phases (gas phase, liquid phase, ice phase and hydrate phase). Hydrate dissociation or formation, phase changes and the corresponding thermal effects are fully described, as are the effects of inhibitors. The model can describe all possible hydrate dissociation mechanisms, i.e., depressurization, thermal stimulation, salting-out effects and inhibitor-induced effects.« less

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of pesticides in water by Carbopak-B solid-phase extraction and high-preformance liquid chromatography

USGS Publications Warehouse

Werner, Stephen L.; Burkhardt, Mark R.; DeRusseau, Sabrina N.

1996-01-01

In accordance with the needs of the National Water-Quality Assessment Program (NAWQA), the U.S. Geological Survey has developed and implemented a graphitized carbon-based solid-phase extraction and high-performance liquid chromatographic analytical method. The method is used to determine 41 pesticides and pesticide metabolites that are not readily amenable to gas chromatography or other high-temperature analytical techniques. Pesticides are extracted from filtered environmental water samples using a 0.5-gram graphitized carbon-based solid-phase cartridge, eluted from the cartridge into two analytical fractions, and analyzed using high-performance liquid chromatography with photodiode-array detection. The upper concentration limit is 1.6 micrograms per liter (=B5g/L) for most compounds. Single-operator method detection limits in organic-free water samples ranged from 0.006 to 0.032 =B5g/L= Recoveries in organic-free water samples ranged from 37 to 88 percent. Recoveries in ground- and surface-water samples ranged from 29 to 94 percent. An optional on-site extraction procedure allows for samples to be collected and processed at remote sites where it is difficult to ship samples to the laboratory within the recommended pre-extraction holding time of 7 days.

Positioning Model-Supported, Participatory, Water Management Decision Making under Uncertainty within the Western Philosphical Discourse on Knowledge and Governance

NASA Astrophysics Data System (ADS)

Purkey, D. R.; Escobar, M.; Mehta, V. K.; Forni, L.

2016-12-01

Two important trends currently shape the manner in which water resources planning and decision making occurs. The first relates to the increasing reliance on participatory stakeholder processes as a forum for evaluating water management options and selecting the appropriate course of action. The second relates to the growing recognition that earlier deterministic approaches to this evaluation of options may no longer be appropriate, nor required. The convergence of these two trends poses questions as to the proper role of data, information, analysis and expertise in the inherently social and political process of negotiating water resources management agreements and implementing water resources management interventions. The question of how to discover the best or optimal option in the face of deep uncertainty related to climate change, demography, economic development, and regulatory reform is compelling. More fundamentally the question of whether the "perfect" option even exits to be discovered is perhaps more critical. While this existential question may be new to the water resource management community, it is not new to western political theory. This paper explores early classical philosophical writing related to issues of knowledge and governance as captured in the work of Plato and Aristotle; and then attempts to place a new approach to analysis-supported, stakeholder-driven water resources planning and decision making within this philosophical discourse. Using examples from river systems in California and the Andes, where the theory of Robust Decision Making has been used as an organizing construct for stakeholder processes, it is argued that the expectation that analysis will lead to the discovery of the perfect option is not warranted when stakeholders are engaged in the process of discovering a consensus option. This argument will touch upon issue of the diversity of values, model uncertainty and creditability, and the visualization of model output required to explore the implications of various management options across a range of inherently unknowable future conditions.

Dichromatic and monochromatic laser radiation effects on survival and morphology of Pantoea agglomerans

NASA Astrophysics Data System (ADS)

Thomé, A. M. C.; Souza, B. P.; Mendes, J. P. M.; Soares, L. C.; Trajano, E. T. L.; Fonseca, A. S.

2017-05-01

Despite the beneficial effects of low-level lasers on wound healing, their application for treatment of infected injuries is controversial because low-level lasers could stimulate bacterial growth exacerbating the infectious process. Thus, the aim of this work was to evaluate in vitro effects of low-level lasers on survival, morphology and cell aggregation of Pantoea agglomerans. P. agglomerans samples were isolated from human pressure injuries and cultures were exposed to low-level monochromatic and simultaneous dichromatic laser radiation to study the survival, cell aggregation, filamentation and morphology of bacterial cells in exponential and stationary growth phases. Fluence, wavelength and emission mode were those used in therapeutic protocols for wound healing. Data show no changes in morphology and cell aggregation, but dichromatic laser radiation decreased bacterial survival in exponential growth phase and monochromatic red and infrared lasers increased bacterial survival at the same fluence. Simultaneous dichromatic laser radiation induces biological effects that differ from those induced by monochromatic laser radiation and simultaneous dichromatic laser could be the option for treatment of infected pressure injuries by Pantoea agglomerans.

Device for limiting single phase ground fault of mining machines

NASA Astrophysics Data System (ADS)

Fediuk, R. S.; Stoyushko, N. Yu; Yevdokimova, Yu G.; Smoliakov, A. K.; Batarshin, V. O.; Timokhin, R. A.

2017-10-01

The paper shows the reasons and consequences of the single-phase ground fault. With all the variety of devices for limiting the current single-phase ground fault, it was found that the most effective are Peterson coils having different switching circuits. Measuring of the capacity of the network is of great importance in this case, a number of options capacitance measurement are presented. A closer look is taken at the device for limiting the current of single-phase short circuit, developed in the Far Eastern Federal University under the direction of Dr. G.E. Kuvshinov. The calculation of single-phase short-circuit currents in the electrical network, without compensation and with compensation of capacitive current is carried out. Simulation of a single-phase circuit in a network with the proposed device is conducted.

An Initial Comparison of Selected Earth Departure Options for Solar Electric Propulsion Missions

NASA Technical Reports Server (NTRS)

Merrill, Raymond Gabriel; Komar, D. R.; Qu, Min; Chrone, Jon; Strange, Nathan; Landau, Damon

2012-01-01

Earth departure options such as the location for deployment, aggregation, and crew rendezvous as well as the type of propulsion leveraged for each mission phase effect overall mission performance metrics such as number of critical maneuvers, mass of propellant to achieve departure, and initial mass required in low Earth orbit. This paper identifies and compares a subset of tactical options for deployment, crew rendezvous, and Earth departure that leverage electric propulsion and hybrid chemical electric propulsion with a goal of improving system efficiency. Departure maneuver specific limitations and penalties are then identified for missions to specific targets for human interplanetary missions providing a better understanding of the impact of decisions related to aggregation and rendezvous locations as well as Earth departure maneuvers on overall system performance.

Navy Occupational Health Information Management System (NOHIMS). Environmental Exposure Module. Users’ Manual

DTIC Science & Technology

1987-01-16

menus , controls user and device access to the system, manages the security features associated with menus , devices, and users, provides...in the files, or the number of files in the system. 2-2 3.0 MODULE INPUT PROCESSES 3.1 Summary of Input Processes The EE module contains many menu ...Output Processes The EE module contains many menu options which enable the user to obtain needed information from the module. These options can be

An expert system as applied to bridges : testing phase : final report.

DOT National Transportation Integrated Search

1991-01-01

This project concludes a four part study regarding the development of an expert system called DOBES, to form conclusions as to the disposition of older bridges. The options include replacement, rehabilitation, improvement, abandonment and routine mai...

A Real Options Approach to Valuing the Risk Transfer in a Multi-Year Procurement Contract

DTIC Science & Technology

2009-10-01

asset follows a Brownian motion process where the returns have a lognormal distribution. H. BLACK-SCHOLES MODEL The value of the put option p on...risk in a firm-fixed-price contract. The government also provides interest-free financing that can greatly reduce the amount of capital a contractor...structured finance and credit default swap applications. 8 E. OPTIONS THEORY We will use closed form BS-type option pricing methods to estimate the

Documentation of Helicopter Aeroelastic Stability Analysis Computer Program (HASTA)

DTIC Science & Technology

1977-12-01

of the blade phasing assumption for which all blades of the rotor are identical and equally spaced azimuthally allows the size of the T. matrices...to be significantly reduced by the removal of the submatrices associated with blades other than the first blade. With the use of this assumption ...different program representational options such as the type of rotor system, the type of blades, and the use of the blade phasing assumption , the

ORGANIZATIONAL CONFLICT OF INTEREST AND THE AIR FORCE CONTRACT AUGMENTATION PROGRAM: A PATTERNED APPROACH TO RISK IDENTIFICATION

DTIC Science & Technology

2016-04-22

eight contractors. It is a multiple - award indefinite-delivery, indefinite quantity (IDIQ) $5 billion arrangement with one base year and four option...evaluation factors, and the pre-award phase is completed. The post-award phase concerns the insurance of performance under the terms of the contract...may have consequences ranging from award fee decrements , contract termination, suspension or debarment, or other appropriate remedies or

[Myopia update 2011].

PubMed

Schaeffel, F

2011-09-01

This review summarises some recent aspects of myopia research. The following conclusions have been drawn. As long as myopia progression is visually controlled, at least three different interventions are possible: (i) spectacles/contact lenses which correct only the centre of the visual field and leave the periphery somewhat myopic, (ii) outdoor activity or equivalent temporary increase in illuminance, (iii) pharmacological intervention of retinal growth signals that are transmitted to the underlying sclera. Options (i) and (ii) can be used without risks although there is still room for improvement of the variables. Option (iii) has re-entered a new phase of orientation with new searches for candidate targets after previous testing with muskarinic antagonists (pirenzepine) in children did not enter phase 3 level. If myopia is outside the range over which it is visually controlled by emmetropisation (in the case of high and pathological myopias), in principle the possibility exists to improve the mechanical stability of the sclera pharmacologically. However, there is still a need for more research. Up to now, the mechanical weakness of the sclera in highly mopyic eyes is surgically stabilised by "scleral buckling". However, these procedures have found limited acceptance since the effects were not very reliable. In 40 - 50 % of the cases of high myopia, degenerative processes are found in the retina which can be seen as consequence of the mechanical tension in the fundus, but may also be indepedent of this factor (no significant correlation with axial length!). In part they can be slowed down by intravitreal anti-VEGF therapy. A long-term study from Denmark has shown that most patients with myopia of between 6-9 dpt during puberty reach retirement age without disabling visual loss. © Georg Thieme Verlag KG Stuttgart · New York.

Non-surgical treatments for the management of early osteoarthritis.

PubMed

Filardo, Giuseppe; Kon, Elizaveta; Longo, Umile Giuseppe; Madry, Henning; Marchettini, Paolo; Marmotti, Antonio; Van Assche, Dieter; Zanon, Giacomo; Peretti, Giuseppe M

2016-06-01

Non-surgical treatments are usually the first choice for the management of knee degeneration, especially in the early osteoarthritis (OA) phase when no clear lesions or combined abnormalities need to be addressed surgically. Early OA may be addressed by a wide range of non-surgical approaches, from non-pharmacological modalities to dietary supplements and pharmacological therapies, as well as physical therapies and novel biological minimally invasive procedures involving injections of various substances to obtain a clinical improvement and possibly a disease-modifying effect. Numerous pharmaceutical agents are able to provide clinical benefit, but no one has shown all the characteristic of an ideal treatment, and side effects have been reported at both systemic and local level. Patients and physicians should have realistic outcome goals in pharmacological treatment, which should be considered together with other conservative measures. Among these, exercise is an effective conservative approach, while physical therapies lack literature support. Even though a combination of these therapeutic options might be the most suitable strategy, there is a paucity of studies focusing on combining treatments, which is the most common clinical scenario. Further studies are needed to increase the limited evidence on non-surgical treatments and their combination, to optimize indications, application modalities, and results with particular focus on early OA. In fact, most of the available evidence regards established OA. Increased knowledge about degeneration mechanisms will help to better target the available treatments and develop new biological options, where preliminary results are promising, especially concerning early disease phases. Specific treatments aimed at improving joint homoeostasis, or even counteracting tissue damage by inducing regenerative processes, might be successful in early OA, where tissue loss and anatomical changes are still at very initial stages.

The cognitive and neural basis of option generation and subsequent choice.

PubMed

Kaiser, Stefan; Simon, Joe J; Kalis, Annemarie; Schweizer, Sophie; Tobler, Philippe N; Mojzisch, Andreas

2013-12-01

Decision-making research has thoroughly investigated how people choose from a set of externally provided options. However, in ill-structured real-world environments, possible options for action are not defined by the situation but have to be generated by the agent. Here, we apply behavioral analysis (Study 1) and functional magnetic resonance imaging (Study 2) to investigate option generation and subsequent choice. For this purpose, we employ a new experimental task that requires participants to generate options for simple real-world scenarios and to subsequently decide among the generated options. Correlational analysis with a cognitive test battery suggests that retrieval of options from long-term memory is a relevant process during option generation. The results of the fMRI study demonstrate that option generation in simple real-world scenarios recruits the anterior prefrontal cortex. Furthermore, we show that choice behavior and its neural correlates differ between self-generated and externally provided options. Specifically, choice between self-generated options is associated with stronger recruitment of the dorsal anterior cingulate cortex. This impact of option generation on subsequent choice underlines the need for an expanded model of decision making to accommodate choice between self-generated options.

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

Specific and Optional Curriculum: An Experience in the Undergraduate Program of Chemical Engineering in Cienfuegos University, Cuba

ERIC Educational Resources Information Center

Martínez, Yolanda García; Velázquez, Claudia Alvarado; Castillo, Rolando Delgado

2016-01-01

This paper pursues to define the pillars for designing the specific (SC) and optional curricula (OC) of Unit Operations and Processes (UOP) Discipline in the Chemical Engineering Program. To achieve this objective a methodology was developed, which was characterized by the participation of every member in the educational process: professors,…

Counterinsurgency Aircraft Procurement Options: Processes, Methods, Alternatives, and Estimates

DTIC Science & Technology

2009-08-01

4. TITLE AND SUBTITLE Counterinsurgency Aircraft Procurement Options: Processes, Methods, Alternatives, and Estimates 5a. CONTRACT NUMBER 5b...Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT A call is being made for an aircraft dedicated to the...counterinsurgency (COIN) mission within military academic circles and the special operations community. Support for a COIN aircraft needs hard numbers, given

75 FR 76059 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Filing of a Proposed Rule Change To...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... BATS Options Book at its displayed price. The non- displayed price of the Market Maker Price Improving Order would not be entered into the BATS Options Book, but would be, along with its displayed size... book processing requirements of Rule 21.8 and, if applicable, processed in accordance with the order...

76 FR 18280 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Proposed Rule Change, as Modified...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... Order. As proposed, a Market Maker Price Improving Order would be ranked on the BATS Options Book at its... the BATS Options Book, but would be, along with its displayed size, converted to a buy or sell order... accordance with the order display and book processing requirements of Rule 21.8 and, if applicable, processed...

Fuel quality-processing study. Volume 2: Literature survey

NASA Technical Reports Server (NTRS)

Jones, G. E., Jr.; Amero, R.; Murthy, B.; Cutrone, M.

1981-01-01

The validity of initial assumptions about raw materials choices and relevant upgrading processing options was confirmed. The literature survey also served to define the on-site (at the turbine location) options for fuel treatment and exhaust gas treatment. The literature survey also contains a substantial compilation of specification and physical property information about liquid fuel products relevant to industrial gas turbines.

Active thermal control systems for lunar and Martian exploration

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Petete, Patricia A.; Dzenitis, John

1990-01-01

Several ATCS options including heat pumps, radiator shading devices, and single-phase flow loops were considered. The ATCS chosen for both lunar and Martian habitats consists of a heat pump integral with a nontoxic fluid acquisition and transport loop, and vertically oriented modular reflux-boiler radiators. The heat pump operates only during the lunar day. The lunar and Martian transfer vehicles have an internal single-phase water-acquisition loop and an external two-phase ammonia rejection system with rotating inflatable radiators. The lunar and Martian excursion vehicles incorporate internal single-phase water acquisition, which is connected via heat exchangers to external body-mounted single-phase radiators. A water evaporation system is used for the transfer vehicles during periods of high heating.

Design of an advanced flight planning system

NASA Technical Reports Server (NTRS)

Sorensen, J. A.; Goka, T.

1985-01-01

The demand for both fuel conservation and four-dimensional traffic management require that the preflight planning process be designed to account for advances in airborne flight management and weather forecasting. The steps and issues in designing such an advanced flight planning system are presented. Focus is placed on the different optimization options for generating the three-dimensional reference path. For the cruise phase, one can use predefined jet routes, direct routes based on a network of evenly spaced grid points, or a network where the grid points are existing navaid locations. Each choice has its own problem in determining an optimum solution. Finding the reference path is further complicated by choice of cruise altitude levels, use of a time-varying weather field, and requiring a fixed time-of-arrival (four-dimensional problem).

Measurement of carbon capture efficiency and stored carbon leakage

DOEpatents

Keeling, Ralph F.; Dubey, Manvendra K.

2013-01-29

Data representative of a measured carbon dioxide (CO.sub.2) concentration and of a measured oxygen (O.sub.2) concentration at a measurement location can be used to determine whether the measured carbon dioxide concentration at the measurement location is elevated relative to a baseline carbon dioxide concentration due to escape of carbon dioxide from a source associated with a carbon capture and storage process. Optionally, the data can be used to quantify a carbon dioxide concentration increase at the first location that is attributable to escape of carbon dioxide from the source and to calculate a rate of escape of carbon dioxide from the source by executing a model of gas-phase transport using at least the first carbon dioxide concentration increase. Related systems, methods, and articles of manufacture are also described.

The end-of-life phase of high-grade glioma patients: dying with dignity?

PubMed

Sizoo, Eefje M; Taphoorn, Martin J B; Uitdehaag, Bernard; Heimans, Jan J; Deliens, Luc; Reijneveld, Jaap C; Pasman, H Roeline W

2013-01-01

In the end-of-life (EOL) phase, high-grade glioma (HGG) patients have a high symptom burden and often lose independence because of physical and cognitive dysfunction. This might affect the patient's personal dignity. We aimed to (a) assess the proportion of HGG patients dying with dignity as perceived by their relatives and (b) identify disease and care factors correlated with dying with dignity in HGG patients. We approached relatives of a cohort of 155 deceased HGG patients for the study. Participants completed a questionnaire concerning the EOL phase of the patient, covering several subthemes: (a) symptoms and signs, (b) health-related quality of life, (c) decision making, (d) place and quality of EOL care, and (e) dying with dignity. Relatives of 81 patients participated and 75% indicated that the patient died with dignity. These patients had fewer communication deficits, experienced fewer transitions between health care settings in the EOL phase, and more frequently died at their preferred place of death. Relatives were more satisfied with the physician providing EOL care and reported that the physician adequately explained treatment options. Multivariate analysis identified satisfaction with the physician, the ability to communicate, and the absence of transitions between settings as most predictive of a dignified death. Physicians caring for HGG patients in the EOL phase should timely focus on explaining possible treatment options, because patients experience communication deficits toward death. Physicians should strive to allow patients to die at their preferred place and avoid transitions during the last month of life.

DEVELOPMENT OF IN-SITU CONTROL DIAGNOSTICS FOR APPLICATION OF EPITAXIAL SUPERCONDUCTOR AND BUFFER LAYERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

B.C. Winkleman; T.V. Giel, Jr.; J. Cunningham

1999-06-30

The recent achievements of critical currents in excess of 1x10{sup 6}amp/cm{sup 2} at 77K in YBCO deposited over suitably textured buffer/substrate composites have stimulated interest in the potential fabrication of these coated conductors as wire. Numerous approaches and manufacturing schemes for producing coated conductor wire are currently being developed. Recently, under the U. S. Department of Energy (DOE's) sponsorship, the University of Tennessee Space Institute (UTSI) performed an extensive evaluation of leading coated conductor processing options. In general, it is our feeling that the science and chemistry that are being developed in the coated conductor wire program now need propermore » engineering evaluation to define the most viable options for a commercial fabrication process. All fabrication processes will need process control measurements. This report provides a specific review of the needs and available technologies for process control for many of the coated conductor processing options. This report also addresses generic process monitoring areas in which additional research and development is needed. The concentration is on the two different approaches for obtaining the textured substrates that have been identified as viable candidates. These are the Los Alamos National Laboratory's (LANL) ion-beam assisted deposition, called IBAD, to obtain a highly textured yttria-stabilized zirconia (YSZ) buffer on nickel alloy strips, and Oak Ridge National Laboratory's (ORNL) rolling assisted, bi-axially textured substrate option called RABiTS{trademark}.« less

GPU-Based Real-Time Volumetric Ultrasound Image Reconstruction for a Ring Array

PubMed Central

Choe, Jung Woo; Nikoozadeh, Amin; Oralkan, Ömer; Khuri-Yakub, Butrus T.

2014-01-01

Synthetic phased array (SPA) beamforming with Hadamard coding and aperture weighting is an optimal option for real-time volumetric imaging with a ring array, a particularly attractive geometry in intracardiac and intravascular applications. However, the imaging frame rate of this method is limited by the immense computational load required in synthetic beamforming. For fast imaging with a ring array, we developed graphics processing unit (GPU)-based, real-time image reconstruction software that exploits massive data-level parallelism in beamforming operations. The GPU-based software reconstructs and displays three cross-sectional images at 45 frames per second (fps). This frame rate is 4.5 times higher than that for our previously-developed multi-core CPU-based software. In an alternative imaging mode, it shows one B-mode image rotating about the axis and its maximum intensity projection (MIP), processed at a rate of 104 fps. This paper describes the image reconstruction procedure on the GPU platform and presents the experimental images obtained using this software. PMID:23529080

The role of troublesome components in plutonium vitrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Hong; Vienna, J.D.; Peeler, D.K.

1996-05-01

One option for immobilizing surplus plutonium is vitrification in a borosilicate glass. Two advantages of the glass form are (1) high tolerance to feed variability and, (2) high solubility of some impurity components. The types of plutonium-containing materials in the United States inventory include: pits, metals, oxides, residues, scrap, compounds, and fuel. Many of them also contain high concentrations of carbon, chloride, fluoride, phosphate, sulfate, and chromium oxide. To vitrify plutonium-containing scrap and residues, it is critical to understand the impact of each component on glass processing and chemical durability of the final product. This paper addresses glass processing issuesmore » associated with these troublesome components. It covers solubility limits of chlorine, fluorine, phosphate, sulfate, and chromium oxide in several borosilicate based glasses, and the effect of each component on vitrification (volatility, phase segregation, crystallization, and melt viscosity). Techniques (formulation, pretreatment, removal, and/or dilution) to mitigate the effect of these troublesome components are suggested.« less

The WISGSK: A computer code for the prediction of a multistage axial compressor performance with water ingestion

NASA Technical Reports Server (NTRS)

Tsuchiya, T.; Murthy, S. N. B.

1982-01-01

A computer code is presented for the prediction of off-design axial flow compressor performance with water ingestion. Four processes were considered to account for the aero-thermo-mechanical interactions during operation with air-water droplet mixture flow: (1) blade performance change, (2) centrifuging of water droplets, (3) heat and mass transfer process between the gaseous and the liquid phases and (4) droplet size redistribution due to break-up. Stage and compressor performance are obtained by a stage stacking procedure using representative veocity diagrams at a rotor inlet and outlet mean radii. The Code has options for performance estimation with (1) mixtures of gas and (2) gas-water droplet mixtures, and therefore can take into account the humidity present in ambient conditions. A test case illustrates the method of using the Code. The Code follows closely the methodology and architecture of the NASA-STGSTK Code for the estimation of axial-flow compressor performance with air flow.

Global Manufacturing of CAR T Cell Therapy.

PubMed

Levine, Bruce L; Miskin, James; Wonnacott, Keith; Keir, Christopher

2017-03-17

Immunotherapy using chimeric antigen receptor-modified T cells has demonstrated high response rates in patients with B cell malignancies, and chimeric antigen receptor T cell therapy is now being investigated in several hematologic and solid tumor types. Chimeric antigen receptor T cells are generated by removing T cells from a patient's blood and engineering the cells to express the chimeric antigen receptor, which reprograms the T cells to target tumor cells. As chimeric antigen receptor T cell therapy moves into later-phase clinical trials and becomes an option for more patients, compliance of the chimeric antigen receptor T cell manufacturing process with global regulatory requirements becomes a topic for extensive discussion. Additionally, the challenges of taking a chimeric antigen receptor T cell manufacturing process from a single institution to a large-scale multi-site manufacturing center must be addressed. We have anticipated such concerns in our experience with the CD19 chimeric antigen receptor T cell therapy CTL019. In this review, we discuss steps involved in the cell processing of the technology, including the use of an optimal vector for consistent cell processing, along with addressing the challenges of expanding chimeric antigen receptor T cell therapy to a global patient population.

Disinfection and Stabilization Processes

EPA Science Inventory

Municipal wastewater sludges are composed of organic and inorganic contaminants from domestic, commercial and industrial wastewaters entering collection systems. Many options are available for ultimate disposal of residual solids, however few of these options provide for benefic...

Air pollution control residues from waste incineration: current UK situation and assessment of alternative technologies.

PubMed

Rani, D Amutha; Boccaccini, A R; Deegan, D; Cheeseman, C R

2008-11-01

Current disposal options for APC residues in the UK and alternative treatment technologies developed world-wide have been reviewed. APC residues are currently landfilled in the UK where they undergo in situ solidification, although the future acceptability of this option is uncertain because the EU waste acceptance criteria (WAC) introduce strict limits on leaching that are difficult to achieve. Other APC residue treatment processes have been developed which are reported to reduce leaching to below relevant regulatory limits. The Ferrox process, the VKI process, the WES-PHix process, stabilisation/solidification using cementitious binders and a range of thermal treatment processes are reviewed. Thermal treatment technologies convert APC residues combined with other wastes into inert glass or glass-ceramics that encapsulate heavy metals. The waste management industry will inevitably use the cheapest available option for treating APC residues and strict interpretation and enforcement of waste legislation is required if new, potentially more sustainable technologies are to become commercially viable.

Perceived and actual cost of healthier foods versus their less healthy alternatives: a case study in a predominantly black urban township in South Africa.

PubMed

Muzigaba, M; Puoane, T

2011-12-01

There is an increasing awareness of the role played by the food retail characteristics in determining individuals' healthy food purchasing and consumption behaviors. The perceived costs of healthier food alternatives have been shown to contribute negatively to individual's food choices in developed societies. However, there is still a dearth of knowledge regarding this phenomenon in low to middle income countries particularly in Africa. This study explored health club member's experiences in buying healthier food options and compared their perceived cost of selected healthier and less healthy foods with actual market costs in a South African township. A cross-sectional study design using quantitative and qualitative research methods. The study was conducted in Khayelitsha, a township in the Western Cape Province in South Africa. Participants were 50 members of a health club, mostly female and above 50 years of age. The study was conducted in three phases. The first phase involved interviews with all 50 health club members. During the second phase ten purposively selected members participated in in-depth interviews based on their unhealthy food-purchasing and consumption patterns identified in the first phase. The third phase involved food price audits from supermarkets as well as convenient stores located in the study setting. Quantitative data were subjected to descriptive statistical analysis, while content analysis was used to analyze qualitative data. Most of the members were illiterate and unemployed, largely dependent on government grants. Qualitative findings showed that low household incomes, their inability to read and interpret nutritional information and personal food preferences contributed to Health club members' unhealthy food-purchasing behaviour. When objectively measured in local stores, the healthier food options proved to be more expensive than their less healthy equivalents. This was consistent with subjects' perceptions about the relative cost of the same foods in their local stores. Healthier foods tended to be more expensive than their less healthy options in local shops audited - both in reality and in the perceptions of health club members. Low income was reported to militate against health club members' healthy food-purchasing behaviour.

Integrated Ceramic Membrane System for Hydrogen Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Joseph; Lim, Hankwon; Drnevich, Raymond

2010-08-05

Phase I was a technoeconomic feasibility study that defined the process scheme for the integrated ceramic membrane system for hydrogen production and determined the plan for Phase II. The hydrogen production system is comprised of an oxygen transport membrane (OTM) and a hydrogen transport membrane (HTM). Two process options were evaluated: 1) Integrated OTM-HTM reactor – in this configuration, the HTM was a ceramic proton conductor operating at temperatures up to 900°C, and 2) Sequential OTM and HTM reactors – in this configuration, the HTM was assumed to be a Pd alloy operating at less than 600°C. The analysis suggestedmore » that there are no technical issues related to either system that cannot be managed. The process with the sequential reactors was found to be more efficient, less expensive, and more likely to be commercialized in a shorter time than the single reactor. Therefore, Phase II focused on the sequential reactor system, specifically, the second stage, or the HTM portion. Work on the OTM portion was conducted in a separate program. Phase IIA began in February 2003. Candidate substrate materials and alloys were identified and porous ceramic tubes were produced and coated with Pd. Much effort was made to develop porous substrates with reasonable pore sizes suitable for Pd alloy coating. The second generation of tubes showed some improvement in pore size control, but this was not enough to get a viable membrane. Further improvements were made to the porous ceramic tube manufacturing process. When a support tube was successfully coated, the membrane was tested to determine the hydrogen flux. The results from all these tests were used to update the technoeconomic analysis from Phase I to confirm that the sequential membrane reactor system can potentially be a low-cost hydrogen supply option when using an existing membrane on a larger scale. Phase IIB began in October 2004 and focused on demonstrating an integrated HTM/water gas shift (WGS) reactor to increase CO conversion and produce more hydrogen than a standard water gas shift reactor would. Substantial improvements in substrate and membrane performance were achieved in another DOE project (DE-FC26-07NT43054). These improved membranes were used for testing in a water gas shift environment in this program. The amount of net H2 generated (defined as the difference of hydrogen produced and fed) was greater than would be produced at equilibrium using conventional water gas shift reactors up to 75 psig because of the shift in equilibrium caused by continuous hydrogen removal. However, methanation happened at higher pressures, 100 and 125 psig, and resulted in less net H2 generated than would be expected by equilibrium conversion alone. An effort to avoid methanation by testing in more oxidizing conditions (by increasing CO2/CO ratio in a feed gas) was successful and net H2 generated was higher (40-60%) than a conventional reactor at equilibrium at all pressures tested (up to 125 psig). A model was developed to predict reactor performance in both cases with and without methanation. The required membrane area depends on conditions, but the required membrane area is about 10 ft2 to produce about 2000 scfh of hydrogen. The maximum amount of hydrogen that can be produced in a membrane reactor decreased significantly due to methanation from about 2600 scfh to about 2400 scfh. Therefore, it is critical to eliminate methanation to fully benefit from the use of a membrane in the reaction. Other modeling work showed that operating a membrane reactor at higher temperature provides an opportunity to make the reactor smaller and potentially provides a significant capital cost savings compared to a shift reactor/PSA combination.« less

Essays in renewable energy and emissions trading

NASA Astrophysics Data System (ADS)

Kneifel, Joshua D.

Environmental issues have become a key political issue over the past forty years and has resulted in the enactment of many different environmental policies. The three essays in this dissertation add to the literature of renewable energy policies and sulfur dioxide emissions trading. The first essay ascertains which state policies are accelerating deployment of non-hydropower renewable electricity generation capacity into a states electric power industry. As would be expected, policies that lead to significant increases in actual renewable capacity in that state either set a Renewables Portfolio Standard with a certain level of required renewable capacity or use Clean Energy Funds to directly fund utility-scale renewable capacity construction. A surprising result is that Required Green Power Options, a policy that merely requires all utilities in a state to offer the option for consumers to purchase renewable energy at a premium rate, has a sizable impact on non-hydro renewable capacity in that state. The second essay studies the theoretical impacts fuel contract constraints have on an electricity generating unit's compliance costs of meeting the emissions compliance restrictions set by Phase I of the Title IV SO2 Emissions Trading Program. Fuel contract constraints restrict a utility's degrees of freedom in coal purchasing options, which can lead to the use of a more expensive compliance option and higher compliance costs. The third essay analytically and empirically shows how fuel contract constraints impact the emissions allowance market and total electric power industry compliance costs. This paper uses generating unit-level simulations to replicate results from previous studies and show that fuel contracts appear to explain a large portion (65%) of the previously unexplained compliance cost simulations. Also, my study considers a more appropriate plant-level decisions for compliance choices by analytically analyzing the plant level decision-making process to show how cost-minimization at the more complex plant level may deviate from cost-minimization at the generating unit level.

The Black-Scholes option pricing problem in mathematical finance: generalization and extensions for a large class of stochastic processes

NASA Astrophysics Data System (ADS)

Bouchaud, Jean-Philippe; Sornette, Didier

1994-06-01

The ability to price risks and devise optimal investment strategies in thé présence of an uncertain "random" market is thé cornerstone of modern finance theory. We first consider thé simplest such problem of a so-called "European call option" initially solved by Black and Scholes using Ito stochastic calculus for markets modelled by a log-Brownien stochastic process. A simple and powerful formalism is presented which allows us to generalize thé analysis to a large class of stochastic processes, such as ARCH, jump or Lévy processes. We also address thé case of correlated Gaussian processes, which is shown to be a good description of three différent market indices (MATIF, CAC40, FTSE100). Our main result is thé introduction of thé concept of an optimal strategy in the sense of (functional) minimization of the risk with respect to the portfolio. If the risk may be made to vanish for particular continuous uncorrelated 'quasiGaussian' stochastic processes (including Black and Scholes model), this is no longer the case for more general stochastic processes. The value of the residual risk is obtained and suggests the concept of risk-corrected option prices. In the presence of very large deviations such as in Lévy processes, new criteria for rational fixing of the option prices are discussed. We also apply our method to other types of options, `Asian', `American', and discuss new possibilities (`doubledecker'...). The inclusion of transaction costs leads to the appearance of a natural characteristic trading time scale. L'aptitude à quantifier le coût du risque et à définir une stratégie optimale de gestion de portefeuille dans un marché aléatoire constitue la base de la théorie moderne de la finance. Nous considérons d'abord le problème le plus simple de ce type, à savoir celui de l'option d'achat `européenne', qui a été résolu par Black et Scholes à l'aide du calcul stochastique d'Ito appliqué aux marchés modélisés par un processus Log-Brownien. Nous présentons un formalisme simple et puissant qui permet de généraliser l'analyse à une grande classe de processus stochastiques, tels que les processus ARCH, de Lévy et ceux à sauts. Nous étudions également le cas des processus Gaussiens corrélés, dont nous montrons qu'ils donnent une bonne description de trois indices boursiers (MATIF, CAC40, FTSE100). Notre résultat principal consiste en l'introduction du concept de stratégie optimale dans le sens d'une minimisation (fonctionnelle) du risque en fonction du portefeuille d'actions. Si le risque peut être annulé pour les processus `quasi-Gaussien' non-corrélés, dont le modèle de Black et Scholes est un exemple, cela n'est plus vrai dans le cas général, le risque résiduel permettant de proposer des coûts d'options "corrigés". En présence de très grandes fluctuations du marché telles que décrites par les processus de Lévy, de nouveaux critères pour fixer rationnellement le prix des options sont nécessaires et sont discutés. Nous appliquons notre méthode à d'autres types d'options, telles que `asiatiques', `américaines', et à de nouvelles options que nous introduisons comme les `options à deux étages'... L'inclusion des frais de transaction dans le formalisme conduit à l'introduction naturelle d'un temps caractéristique de transaction.

Status of the assessment phase of the ESA M3 mission candidate LOFT

NASA Astrophysics Data System (ADS)

Corral van Damme, Carlos; Ayre, Mark; Lumb, David; Short, Alexander D.; Rando, Nicola

2012-09-01

LOFT (Large Observatory For x-ray Timing) is one of four candidates for the M3 slot (launch in 2024, with the option of a launch in 2022) of ESAs Cosmic Vision 2015 - 2025 Plan, and as such it is currently undergoing an initial assessment phase lasting one year. The objective of the assessment phase is to provide the information required to enable the down selection process, in particular: the space segment definition for meeting the assigned science objectives; consideration of and initial definition of the implementation schedule; an estimate of the mission Cost at Completion (CaC); an evaluation of the technology readiness evaluation and risk assessment. The assessment phase is divided into two interleaved components: (i) A payload assessment study, performed by teams funded by member states, which is primarily intended for design, definition and programmatic/cost evaluation of the payload, and (ii) A system industrial study, which has essentially the same objectives for the space segment of the mission. This paper provides an overview of the status of the LOFT assessment phase, both for payload and platform. The initial focus is on the payload design status, providing the reader with an understanding of the main features of the design. Then the space segment assessment study status is presented, with an overview of the principal challenges presented by the LOFT payload and mission requirements, and a presentation of the expected solutions. Overall the mission is expected to enable cutting-edge science, is technically feasible, and should remain within the required CaC for an M3 candidate.

Experiences with an adaptive design for a dose-finding study in patients with osteoarthritis.

PubMed

Miller, Frank; Björnsson, Marcus; Svensson, Ola; Karlsten, Rolf

2014-03-01

Dose-finding studies in non-oncology areas are usually conducted in Phase II of the development process of a new potential medicine and it is key to choose a good design for such a study, as the results will decide if and how to proceed to Phase III. The present article has focus on the design of a dose-finding study for pain in osteoarthritis patients treated with the TRPV1 antagonist AZD1386. We describe different design alternatives in the planning of this study, the reasoning for choosing the adaptive design and experiences with conduct and interim analysis. Three alternatives were proposed: one single dose-finding study with parallel design, a programme with a smaller Phase IIa study followed by a Phase IIb dose-finding study, and an adaptive dose-finding study. We describe these alternatives in detail and explain why the adaptive design was chosen for the study. We give insights in design aspects of the adaptive study, which need to be pre-planned, like interim decision criteria, statistical analysis method and setup of a Data Monitoring Committee. Based on the interim analysis it was recommended to stop the study for futility since AZD1386 showed no significant pain decrease based on the primary variable. We discuss results and experiences from the conduct of the study with the novel design approach. Huge cost savings have been done compared to if the option with one dose-finding design for Phase II had been chosen. However, we point out several challenges with this approach. Copyright © 2014 Elsevier Inc. All rights reserved.

Options to enhance the long-term viability of the Essential Air Service program

DOT National Transportation Integrated Search

2002-08-30

Over two decades ago, the Congress deregulated the airline industry, phasing out the federal : governments control over domestic fares and routes served and allowing market forces to : determine the price, quantity, and quality of service. Concern...

GROUND-WATER SAMPLING AND GEOPHYSICAL METHODS DEVELOPMENT AND EVALUATION

EPA Science Inventory

Inadequate site characterization and a lack of knowledge of subsurface contaminant distributions (particularly Non-Aqueous Phase Liquids [NAPLs]) hinder our ability to make good decisions on remediation options and to conduct adequate cleanup efforts at contaminated sites. Non-i...

The origins of options.

PubMed

Smaldino, Paul E; Richerson, Peter J

2012-01-01

Most research on decision making has focused on how human or animal decision makers choose between two or more options, posed in advance by the researchers. The mechanisms by which options are generated for most decisions, however, are not well understood. Models of sequential search have examined the trade-off between continued exploration and choosing one's current best option, but still cannot explain the processes by which new options are generated. We argue that understanding the origins of options is a crucial but untapped area for decision making research. We explore a number of factors which influence the generation of options, which fall broadly into two categories: psycho-biological and socio-cultural. The former category includes factors such as perceptual biases and associative memory networks. The latter category relies on the incredible human capacity for culture and social learning, which doubtless shape not only our choices but the options available for choice. Our intention is to start a discussion that brings us closer toward understanding the origins of options.

The Origins of Options

PubMed Central

Smaldino, Paul E.; Richerson, Peter J.

2012-01-01

Most research on decision making has focused on how human or animal decision makers choose between two or more options, posed in advance by the researchers. The mechanisms by which options are generated for most decisions, however, are not well understood. Models of sequential search have examined the trade-off between continued exploration and choosing one’s current best option, but still cannot explain the processes by which new options are generated. We argue that understanding the origins of options is a crucial but untapped area for decision making research. We explore a number of factors which influence the generation of options, which fall broadly into two categories: psycho-biological and socio-cultural. The former category includes factors such as perceptual biases and associative memory networks. The latter category relies on the incredible human capacity for culture and social learning, which doubtless shape not only our choices but the options available for choice. Our intention is to start a discussion that brings us closer toward understanding the origins of options. PMID:22514515

Standard spacecraft economic analysis. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Harris, E. D.; Large, J. P.

1976-01-01

A study of the comparative program costs associated with use of various standardized spacecraft for Air Force space test program missions to be flown on the space shuttle during the 1980-1990 time period is reviewed. The first phase of the study considered a variety of procurement mixes composed of existing or programmed NASA standard spacecraft designs and a Air Force standard spacecraft design. The results were briefed to a joint NASA/Air Force audience on July 11, 1976. The second phase considered additional procurement options using an upgraded version of an existing NASA design. The results of both phases are summarized.

Phase C/D program development plan. Volume 1: Program plan

NASA Technical Reports Server (NTRS)

1971-01-01

The Phase C/D definition of the Modular Space Station has been developed. The modular approach selected during the option period was evaluated, requirements were defined, and program definition and preliminary design were accomplished. The Space Station Project is covered in depth, the research applications module is limited to a project-level definition, and the shuttle operations are included for interface requirements identification, scheduling, and costing. Discussed in detail are: (1) baseline program and project descriptions; (2) phase project planning; (3) modular space station program schedule; (4) program management plan; (5) operations; (6) facilities; (7) logistics; and (8) manpower.

Greenbelt Homes Pilot Program. Summary of Building Envelope Retrofits, Planned HVAC Equipment Upgrades, and Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiehagen, J.; Del Bianco, M.; Mallay, D.

2015-05-22

The U.S. Department of Energy Building America team Partnership for Home Innovation wrote a report on Phase 1 of the project that summarized a condition assessment of the homes and evaluated retrofit options within the constraints of the cooperative provided by GHI. Phase 2 was completed following monitoring in the 2013–2014 winter season; the results are summarized in this report. Phase 3 upgrades of heating equipment will be implemented in time for the 2014–2015 heating season and are not part of this report.

Phase I of the Near Term Hybrid Passenger Vehicle Development Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

The results of Phase I of the Near-Term Hybrid Vehicle Program are summarized. This phase of the program ws a study leading to the preliminary design of a 5-passenger hybrid vehicle utilizing two energy sources (electricity and gasoline/diesel fuel) to minimize petroleum usage on a fleet basis. This report presents the following: overall summary of the Phase I activity; summary of the individual tasks; summary of the hybrid vehicle design; summary of the alternative design options; summary of the computer simulations; summary of the economic analysis; summary of the maintenance and reliability considerations; summary of the design for crash safety;more » and bibliography.« less

Short break and emergency respite care: what options for young people with life-limiting conditions?

PubMed

Mitchell, Tracy K; Knighting, Katherine; O'Brien, Mary R; Jack, Barbara A

2016-02-01

Service providers face difficult decisions about how best to develop services for the increasing numbers of young people with life-limiting conditions who require palliative care. To explore alternative short break and emergency respite care options to children's hospice care. A two-phase evaluation with young people, families and professionals. Phase 1: qualitative semi-structured interviews and focus groups (n=53). Phase 2: mixed-method survey (n=82), qualitative findings only. There were few, or no, appropriate short break and emergency respite care alternatives when children's hospice care was not available that can meet the need of young people with life-limiting conditions, creating anxiety for children's hospice users and those leaving the service as a result of reaching transition age or through no longer meeting the children's hospice eligibility criteria. Access to appropriate short break and emergency respite care is required to prevent lifelong negative consequences for young people with life-limiting conditions, their family and society. Research is undoubtedly required to explore the impact and outcomes of children's hospice discharge for young people and their family. Particular attention should be paid to the lack of services for an increasing population making the transition from children's hospices.

Phase II drugs currently being investigated for the treatment of hypogonadism.

PubMed

Udedibia, Emeka; Kaminetsky, Jed

2014-12-01

Hypogonadism is the most common endocrine disorder, which affects men of all age groups. Recent shifts in public awareness, increased screening and recognition of symptoms and updated diagnostic criteria have led to an increase in men diagnosed as hypogonadal, including middle-aged and older men who previously would have been considered eugonadal. The increase in testosterone replacement therapy (TRT) has paralleled an increase in advancements of treatment options. Although current therapies are highly efficacious for many men, there remains a need for newer therapies that are more cost-effective, preserve ease of use and administration, mitigate undesirable effects and closely mimic physiological levels of testosterone. In this review, the authors discuss current TRTs and therapies in development for the treatment of hypogonadism. The focus is on therapies under Phase II investigation or those who have recently completed Phase II study. With several new therapies in development, the authors expect advancements in achieving treatment benchmarks that meet the needs of the individual symptomatic hypogonadal male. Increased public awareness of hypogonadism and TRT has led to a welcomed expansion in the choice of TRT options. These include new delivery systems, formulations, routes of administration and non-testosterone modalities.

The direct assignment option as a modular design component: an example for the setting of two predefined subgroups.

PubMed

An, Ming-Wen; Lu, Xin; Sargent, Daniel J; Mandrekar, Sumithra J

2015-01-01

A phase II design with an option for direct assignment (stop randomization and assign all patients to experimental treatment based on interim analysis, IA) for a predefined subgroup was previously proposed. Here, we illustrate the modularity of the direct assignment option by applying it to the setting of two predefined subgroups and testing for separate subgroup main effects. We power the 2-subgroup direct assignment option design with 1 IA (DAD-1) to test for separate subgroup main effects, with assessment of power to detect an interaction in a post-hoc test. Simulations assessed the statistical properties of this design compared to the 2-subgroup balanced randomized design with 1 IA, BRD-1. Different response rates for treatment/control in subgroup 1 (0.4/0.2) and in subgroup 2 (0.1/0.2, 0.4/0.2) were considered. The 2-subgroup DAD-1 preserves power and type I error rate compared to the 2-subgroup BRD-1, while exhibiting reasonable power in a post-hoc test for interaction. The direct assignment option is a flexible design component that can be incorporated into broader design frameworks, while maintaining desirable statistical properties, clinical appeal, and logistical simplicity.

Engineered Option Treatment of Remediated Nitrate Salts: Surrogate Batch-Blending Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anast, Kurt Roy

2016-03-11

This report provides results from batch-blending test work for remediated nitrate salt (RNS) treatment. Batch blending was identified as a preferred option for blending RNS and unremediated nitrate salt (UNS) material with zeolite to effectively safe the salt/Swheat material identified as ignitable (U.S. Environmental Protection Agency code D001). Blending with zeolite was the preferred remediation option identified in the Options Assessment Report and was originally proposed as the best option for remediation by Clark and Funk in their report, Chemical Reactivity and Recommended Remediation Strategy for Los Alamos Remediated Nitrate Salt (RNS) Wastes, and also found to be a preferredmore » option in the Engineering Options Assessment Report: Nitrate Salt Waste Stream Processing. This test work evaluated equipment and recipe alternatives to achieve effective blending of surrogate waste with zeolite.« less

Precision phase control for the radio frequency system of K500 superconducting cyclotron at Variable Energy Cyclotron Centre, Kolkata

DOE Office of Scientific and Technical Information (OSTI.GOV)

Som, Sumit; Ghosh, Surajit; Seth, Sudeshna

2013-11-15

Variable Energy Cyclotron Centre (VECC) has commissioned K500 Superconducting cyclotron (SCC) based on MSU and Texas A and M university cyclotrons. The radio frequency (RF) system of SCC has been commissioned with the stringent requirement of various RF parameters. The three-phase RF system of Superconducting cyclotron has been developed in the frequency range 9–27 MHz with amplitude and phase stability of 100 ppm and ±0.1°, respectively. The phase control system has the option to change the relative phase difference between any two RF cavities and maintain the phase stability within ±0.1° during round-the-clock cyclotron operation. The said precision phase loopmore » consists of both analogue In-phase/Quadrature modulator to achieve faster response and also Direct Digital Synthesis based phase shifter to achieve wide dynamic range as well. This paper discusses detail insights into the various issues of phase control for the K500 SCC at VECC, Kolkata.« less

Real Option in Capital Budgeting for SMEs: Insight from Steel Company

NASA Astrophysics Data System (ADS)

Muharam, F. M.; Tarrazon, M. A.

2017-06-01

Complex components of investment projects can only be analysed accurately if flexibility and comprehensive consideration of uncertainty are incorporated into valuation. Discounted cash flow (DCF) analysis has failed to cope with strategic future alternatives that affect the right value of investment projects. Real option valuation (ROV) proves to be the right tool for this purpose since it enables to calculate the enlarged or strategic Net Present Value (ENPV). This study attempts to provide an insight of the usage of ROV in capital budgeting and investment decision-making processes of SMEs. Exploring into the first stage processing of steel industry, analysis of alternatives to cancel, to expand, to defer or to abandon is performed. Completed with multiple options interaction and a sensitivity analysis, our findings prove that the application of ROV is beneficial for complex investment projects independently from the size of the company and particularly suitable in scenarios with scarce resources. The application of Real Option Valuation (ROV) is plausible and beneficial for SMEs to be incorporated in the strategic decision making process.

Greater decision-making competence is associated with greater expected-value sensitivity, but not overall risk taking: an examination of concurrent validity.

PubMed

Parker, Andrew M; Weller, Joshua A

2015-01-01

Decision-making competence reflects individual differences in the susceptibility to committing decision-making errors, measured using tasks common from behavioral decision research (e.g., framing effects, under/overconfidence, following decision rules). Prior research demonstrates that those with higher decision-making competence report lower incidence of health-risking and antisocial behaviors, but there has been less focus on intermediate processes that may impact real-world decisions, and, in particular, those implicated by normative models. Here we test the associations between measures of youth decision-making competence (Y-DMC) and one such process, the degree to which individuals make choices consistent with maximizing expected value (EV). Using a task involving hypothetical gambles, we find that greater EV sensitivity is associated with greater Y-DMC. Higher Y-DMC scores are associated with (a) choosing risky options when EV favors those options and (b) avoiding risky options when EV favors a certain option. This relationship is stronger for gambles that involved potential losses. The results suggest that Y-DMC captures decision processes consistent with standard normative evaluations of risky decisions.

Ongoing developments in RSV prophylaxis: a clinician's analysis.

PubMed

Rezaee, Fariba; Linfield, Debra T; Harford, Terri J; Piedimonte, Giovanni

2017-06-01

Respiratory syncytial virus (RSV) is the most common respiratory pathogen in infants and young children worldwide. Lower respiratory tract infection due to RSV is one of the most common causes of hospitalization for infants, especially those born premature or with chronic lung or heart disease. Furthermore, RSV infection is an important cause of morbidity in adults, particularly in the elderly and immunocompromised individuals. The acute phase of this infection is often followed by episodes of wheezing that recur for months or years and usually lead to a physician diagnosis of asthma. RSV was discovered more than 50 years ago, and despite extensive research to identify pharmacological therapies, the most effective management of this infection remains supportive care. The trial of a formalin-inactivated RSV vaccine in the 1960s resulted in priming the severe illness upon natural infection. Currently, Palivizumab is the only available option for RSV prophylaxis, and because of restricted clinical benefits and high costs, it has been limited to a group of high-risk infants. There are several ongoing trials in preclinical, Phase-I, Phase-II, or Phase-III clinical stages for RSV vaccine development based on various strategies. Here we review the existing available prophylactic options, the current stages of RSV vaccine clinical trials, different strategies, and major hurdles in the development of an effective RSV vaccine. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

On a learning curve for shared decision making: Interviews with clinicians using the knee osteoarthritis Option Grid.

PubMed

Elwyn, Glyn; Rasmussen, Julie; Kinsey, Katharine; Firth, Jill; Marrin, Katy; Edwards, Adrian; Wood, Fiona

2018-02-01

Tools used in clinical encounters to illustrate to patients the risks and benefits of treatment options have been shown to increase shared decision making. However, we do not have good information about how these tools are viewed by clinicians and how clinicians think patients would react to their use. Our aim was to examine clinicians' views about the possible and actual use of tools designed to support patients and clinicians to collaborate and deliberate about treatment options, namely, Option Grid decision aids. We conducted a thematic analysis of qualitative interviews embedded in the intervention phase of a trial of an Option Grid decision aid for osteoarthritis of the knee. Interviews were conducted with 6 participating clinicians before they used the tool and again after clinicians had used the tool with 6 patients. In the first interview, clinicians voiced concerns that the tool would lead to an increase in encounter duration, patient resistance regarding involvement in decision making, and potential information overload. At the second interview, after minimal training, the clinicians reported that the tool had changed their usual way of communicating, and it was generally acceptable and helpful to integrate it into practice. After experiencing the use of Option Grids, clinicians became more willing to use the tools in their clinical encounters with patients. How best to introduce Option Grids to clinicians and adopt their use into practice will need careful consideration of context, workflow, and clinical pathways. © 2016 John Wiley & Sons, Ltd.

Microdosing and Other Phase 0 Clinical Trials: Facilitating Translation in Drug Development

DOE PAGES

Burt, T.; Yoshida, K.; Lappin, G.; ...

2016-02-26

A number of drivers and developments suggest that microdosing and other phase 0 applications will experience increased utilization in the near-to-medium future. Increasing costs of drug development and ethical concerns about the risks of exposing humans and animals to novel chemical entities are important drivers in favor of these approaches, and can be expected only to increase in their relevance. An increasing body of research supports the validity of extrapolation from the limited drug exposure of phase 0 approaches to the full, therapeutic exposure, with modeling and simulations capable of extrapolating even non-linear scenarios. An increasing number of applications andmore » design options demonstrate the versatility and flexibility these approaches offer to drug developers including the study of PK, bioavailability, DDI, and mechanistic PD effects. PET microdosing allows study of target localization, PK and receptor binding and occupancy, while Intra-Target Microdosing (ITM) allows study of local therapeutic-level acute PD coupled with systemic microdose-level exposure. Applications in vulnerable populations and extreme environments are attractive due to the unique risks of pharmacotherapy and increasing unmet healthcare needs. Lastly, all phase 0 approaches depend on the validity of extrapolation from the limited-exposure scenario to the full exposure of therapeutic intent, but in the final analysis the potential for controlled human data to reduce uncertainty about drug properties is bound to be a valuable addition to the drug development process.« less

Microdosing and Other Phase 0 Clinical Trials: Facilitating Translation in Drug Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burt, T.; Yoshida, K.; Lappin, G.

A number of drivers and developments suggest that microdosing and other phase 0 applications will experience increased utilization in the near-to-medium future. Increasing costs of drug development and ethical concerns about the risks of exposing humans and animals to novel chemical entities are important drivers in favor of these approaches, and can be expected only to increase in their relevance. An increasing body of research supports the validity of extrapolation from the limited drug exposure of phase 0 approaches to the full, therapeutic exposure, with modeling and simulations capable of extrapolating even non-linear scenarios. An increasing number of applications andmore » design options demonstrate the versatility and flexibility these approaches offer to drug developers including the study of PK, bioavailability, DDI, and mechanistic PD effects. PET microdosing allows study of target localization, PK and receptor binding and occupancy, while Intra-Target Microdosing (ITM) allows study of local therapeutic-level acute PD coupled with systemic microdose-level exposure. Applications in vulnerable populations and extreme environments are attractive due to the unique risks of pharmacotherapy and increasing unmet healthcare needs. Lastly, all phase 0 approaches depend on the validity of extrapolation from the limited-exposure scenario to the full exposure of therapeutic intent, but in the final analysis the potential for controlled human data to reduce uncertainty about drug properties is bound to be a valuable addition to the drug development process.« less

Neural correlates of decision making with explicit information about probabilities and incentives in elderly healthy subjects.

PubMed

Labudda, Kirsten; Woermann, Friedrich G; Mertens, Markus; Pohlmann-Eden, Bernd; Markowitsch, Hans J; Brand, Matthias

2008-06-01

Recent functional neuroimaging and lesion studies demonstrate the involvement of the orbitofrontal/ventromedial prefrontal cortex as a key structure in decision making processes. This region seems to be particularly crucial when contingencies between options and consequences are unknown but have to be learned by the use of feedback following previous decisions (decision making under ambiguity). However, little is known about the neural correlates of decision making under risk conditions in which information about probabilities and potential outcomes is given. In the present study, we used functional magnetic resonance imaging to measure blood-oxygenation-level-dependent (BOLD) responses in 12 subjects during a decision making task. This task provided explicit information about probabilities and associated potential incentives. The responses were compared to BOLD signals in a control condition without information about incentives. In contrast to previous decision making studies, we completely removed the outcome phase following a decision to exclude the potential influence of feedback previously received on current decisions. The results indicate that the integration of information about probabilities and incentives leads to activations within the dorsolateral prefrontal cortex, the posterior parietal lobe, the anterior cingulate and the right lingual gyrus. We assume that this pattern of activation is due to the involvement of executive functions, conflict detection mechanisms and arithmetic operations during the deliberation phase of decisional processes that are based on explicit information.

Galileo - The Serial-Production AIT Challenge

NASA Technical Reports Server (NTRS)

Ragnit, Ulrike; Brunner, Otto

2008-01-01

The Galileo Project is one of the most demanding projects of ESA, being Europe's autarkic navigation system and a constellation composed of 30 satellites. This presentation points out the different phases of the project up to the full operational capability and the corresponding launch options with respect to launch vehicles as well as launch configurations. One of the biggest challenges is to set up a small serial 'production line' for the overall integration and test campaign of satellites. This production line demands an optimization of all relevant tasks, taking into account also backup and recovery actions. A comprehensive AIT concept is required, reflecting a tightly merged facility layout and work flow design. In addition a common data management system is needed to handle all spacecraft related documentation and to have a direct input-out flow for all activities, phases and positions at the same time. Process optimization is a well known field of engineering in all small high tech production lines, nevertheless serial production of satellites are still not the daily task in space business and therefore new concepts have to be put in place. Therefore, and in order to meet the satellites overall system optimization, a thorough interface between unit/subsystem manufacturing and satellite AIT must be realized to ensure a smooth flow and to avoid any process interruption, which would directly lead to a schedule impact.

American option pricing in Gauss-Markov interest rate models

NASA Astrophysics Data System (ADS)

Galluccio, Stefano

1999-07-01

In the context of Gaussian non-homogeneous interest-rate models, we study the problem of American bond option pricing. In particular, we show how to efficiently compute the exercise boundary in these models in order to decompose the price as a sum of a European option and an American premium. Generalizations to coupon-bearing bonds and jump-diffusion processes for the interest rates are also discussed.

How Many Choices Are Good? Measurement of the Effects of Course Choice on Perceptions of a Marketing Option

ERIC Educational Resources Information Center

Ackerman, David S.; Gross, Barbara L.

2006-01-01

This study examines the effects of amount of choice given students in selecting courses to complete a marketing minor, referred to as a marketing option. It examines how differing levels of choice can affect perceptions of, and feelings about, a marketing option. The course choice process is also explored. The impact of choice on students' desire…

The order of information processing alters economic gain-loss framing effects.

PubMed

Kwak, Youngbin; Huettel, Scott

2018-01-01

Adaptive decision making requires analysis of available information during the process of choice. In many decisions that information is presented visually - which means that variations in visual properties (e.g., salience, complexity) can potentially influence the process of choice. In the current study, we demonstrate that variation in the left-right positioning of risky and safe decision options can influence the canonical gain-loss framing effect. Two experiments were conducted using an economic framing task in which participants chose between gambles and certain outcomes. The first experiment demonstrated that the magnitude of the gain-loss framing effect was greater when the certain option signaling the current frame was presented on the left side of the visual display. Eye-tracking data during task performance showed a left-gaze bias for initial fixations, suggesting that the option presented on the left side was processed first. Combination of eye-tracking and choice data revealed that there was a significant effect of direction of first gaze (i.e. left vs. right) as well as an interaction between gaze direction and identity of the first fixated information (i.e. certain vs. gamble) regardless of frame. A second experiment presented the gamble and certain options in a random order, with a temporal delay between their presentations. We found that the magnitude of gain-loss framing was larger when the certain option was presented first, regardless of left and right positioning, only in individuals with lower risk-taking tendencies. The effect of presentation order on framing was not present in high risk-takers. These results suggest that the sequence of visual information processing as well as their left-right positioning can bias choices by changing the impact of the presented information during risky decision making. Copyright © 2017 Elsevier B.V. All rights reserved.

Impacts of Groundwater Constraints on Saudi Arabia's Low-Carbon Electricity Supply Strategy.

PubMed

Parkinson, Simon C; Djilali, Ned; Krey, Volker; Fricko, Oliver; Johnson, Nils; Khan, Zarrar; Sedraoui, Khaled; Almasoud, Abdulrahman H

2016-02-16

Balancing groundwater depletion, socioeconomic development and food security in Saudi Arabia will require policy that promotes expansion of unconventional freshwater supply options, such as wastewater recycling and desalination. As these processes consume more electricity than conventional freshwater supply technologies, Saudi Arabia's electricity system is vulnerable to groundwater conservation policy. This paper examines strategies for adapting to long-term groundwater constraints in Saudi Arabia's freshwater and electricity supply sectors with an integrated modeling framework. The approach combines electricity and freshwater supply planning models across provinces to provide an improved representation of coupled infrastructure systems. The tool is applied to study the interaction between policy aimed at a complete phase-out of nonrenewable groundwater extraction and concurrent policy aimed at achieving deep reductions in electricity sector carbon emissions. We find that transitioning away from nonrenewable groundwater use by the year 2050 could increase electricity demand by more than 40% relative to 2010 conditions, and require investments similar to strategies aimed at transitioning away from fossil fuels in the electricity sector. Higher electricity demands under groundwater constraints reduce flexibility of supply side options in the electricity sector to limit carbon emissions, making it more expensive to fulfill climate sustainability objectives. The results of this analysis underscore the importance of integrated long-term planning approaches for Saudi Arabia's electricity and freshwater supply systems.

Clinical trials as treatment option: bioethics and health care disparities in substance dependency.

PubMed

Timmermans, Stefan; McKay, Tara

2009-12-01

Bioethicists have warned against the dangers of mixing research with treatment. They are concerned that research priorities may take precedence over individual patient needs and that research subjects tend to misunderstand the purpose of research or overestimate the direct medical benefits of participating in studies. Yet, other work has questioned whether clinical research can always be separated from therapeutic benefit for participants. Using in-depth interviews with participants in two phase III randomized U.S. clinical trials for methamphetamine dependency, we examine the treatment options available to participants, their experiences with participating in the trials, and potential problems of trial participation. We find that while participants have experience with four alternative treatment modalities - quitting alone, support groups, in-patient treatment facilities, and consulting primary care physicians - the randomized clinical trials compare favorably to alternatives because they provide access to evidence-based behavioral treatments, specialized medical professionals, non-judgmental staff, and the possibility of receiving an experimental drug. We conclude that while randomized clinical trials are imperfect substitutes for clinical care, they constitute a fragile and sporadic therapeutic niche in a country with fundamental problems in access to health care, a mixed punitive-therapeutic drug addiction policy, and a profit-driven pharmaceutical development and approval process.

Butyrylcholinesterase for protection from organophosphorus poisons; catalytic complexities and hysteretic behavior

PubMed Central

Masson, Patrick; Lockridge, Oksana

2009-01-01

Butyrylcholinesterase is a promiscuous enzyme that displays complex kinetic behavior. It is toxicologically important because it detoxifies organophosphorus poisons (OP) by making a covalent bond with the OP. The OP and the butyrylcholinesterase are both inactivated in the process. Inactivation of butyrylcholinesterase has no adverse effects. However inactivation of acetylcholinesterase in nerve synapses can be lethal. OP-inhibited butyrylcholinesterase and acetylcholinesterase can be reactivated with oximes provided the OP has not aged. Strategies for preventing the toxicity of OP include a) treatment with an OP scavenger, b) reaction of nonaged enzyme with oximes, c) reactivation of aged enzyme, d) slowing down aging with peripheral site ligands, and e) design of mutants that rapidly hydrolyze OP. Option (a) has progressed through phase I clinical trials with human butyrylcholinesterase. Option (b) is in routine clinical use. The others are at the basic research level. Butyrylcholinesterase displays complex kinetic behavior including activation by positively charged esters, ability to hydrolyze amides, and a lag time (hysteresis) preceding hydrolysis of benzoylcholine and N-methyl indoxyl acetate. Mass spectrometry has identified new OP binding motifs on tyrosine and lysine in proteins that have no active site serine. It is proposed, but not yet proven, that low dose exposure involves OP modification of proteins that have no active site serine. PMID:20004171

[Successful endoscopic dilatation of a stenosis in relation to an ileorectal anastomosis by acute ileus].

PubMed

Kjærgaard, Jane Christensen; Hendel, Jakob; Gügenur, Ismail

2014-02-17

Endoscopic dilatation is a treatment option for patients with Crohns disease suffering from stenosis in relation to an ileorectal anastomosis. We present a case of a patient with Crohns disease who was admitted with acute obstructive symptoms due to a stensosis of the ileorectal anastomosis. The patient was septic. We performed a successful endoscopic dilatation in the acute phase and the patient was discharged few days after an uneventful recovery. Endoscopic dilatation of an ileorectal anastomsis in patients with Crohns disease is a treatment option in the acute setting when performed by experienced endoscopists.

Shuttle/IUS performance for planetary missions. [Interim Upper Stage

NASA Technical Reports Server (NTRS)

Cork, M. J.; Driver, J. M.; Wright, J. L.

1975-01-01

Potential requirements for planetary missions in the 1980s, capabilities of the Interim Upper Stage (IUS) candidates to perform those missions, and Shuttle/IUS mission profile options for performance enhancement are examined. The most demanding planetary missions are the Pioneer Saturn/Uranus/Titan Probe and the Mariner-class orbiters of Mercury, Jupiter, and Saturn. Options available to designers of these missions will depend on the specific IUS selected for development and the programmatic phasing of the IUS and the NASA Tug. Use of Shuttle elliptic orbits as initial conditions for IUS ignition offers significant performance improvements; specific values are mission dependent.

NATO Guide for Judgment-Based Operational Analysis in Defence Decision Making (Guide OTAN pour l’analyse operationnelle basee sur le jugement dans la prise de decision de defense). Client-Oriented Volume

DTIC Science & Technology

2012-06-01

disputed thus leading to informed debate about the actions to take. The advice will lead to an informed debate about the pros and cons of...his preferred courses of action, compare pros and cons . Figure 4 illustrates how each phase may include tasks (and methods) that are typical of...options. Output: A compilation of the pros and cons of the three options. An example of presenting the data for this generic acquisition study is

Vasomotor and Related Menopause Symptoms.

PubMed

Stuenkel, Cynthia A

2018-05-31

Vasomotor symptoms are the most common manifestation of the menopause transition and postmenopausal phases of reproductive life. They interfere not only in quality of life, but also contribute to sleep and mood disturbances that potentially compromise home and work effectiveness. Treatment options include hormone therapy (HT), nonhormonal prescription drugs, mind body and behavior therapies, and over-the-counter preparations. Evidence confirms that HT is the most effective option. The initial reticence to prescribe HT immediately following publication of the Women's Health Initiative has been replaced by clear guidelines for confidently identifying women for whom this therapy will be safe.

All Internal Segmental Bone Transport and Optional Lengthening With a Newly Developed Universal Cylinder-Kombi-Tube Module for Motorized Nails-Description of a Surgical Technique.

PubMed

Krettek, Christian; El Naga, Ashraf

2017-10-01

Segmental transport is an effective method of treatment for segmental defects, but the need for external fixation during the transport phase is a disadvantage. To avoid external fixation, we have developed a Cylinder-Kombi-Tube Segmental Transport (CKTST) module for combination with a commercially available motorized lengthening nail. This CKTST module allows for an all-internal segmental bone transport and also allows for optional lengthening if needed. The concept and surgical technique of CKTST are described and illustrated with a clinical case.

Prospecting Rovers for Lunar Exploration

NASA Technical Reports Server (NTRS)

Graham, Jerry B.; Vaughn, Jason A.; Farmer, Jeffery T.

2007-01-01

A study of lunar rover options for exploring the permanently shadowed regions of the lunar environment is presented. The potential for nearly continuous solar illumination coupled with the potential for water ice, focus exploration planner's attention on the polar regions of the moon. These regions feature craters that scientists have reason to believe may contain water ice. Water ice can be easily converted to fuel cell reactants, breathing oxygen, potable water, and rocket propellant. For these reasons, the NASA Robotic Lunar Exploration Program (RLEP) sponsored a study of potential prospecting rover concepts as one part of the RLEP-2 Pre-Phase A. Numerous vehicle configurations and power, thermal, and communication options are investigated. Rover options in the 400kg to 530kg class are developed which are capable of either confirming the presence of water ice at the poles, or conclusively demonstrating its absence.

Focusing on cardiovascular disease in type 2 diabetes mellitus: an introduction to bromocriptine QR.

PubMed

Bell, David S

2012-09-01

Cardiovascular risk reduction is a key priority in patients with diabetes. The relationship between glycemic control and macrovascular outcomes, such as the benefit of intensive glucose control and the importance of postprandial or fasting blood glucose, is still under debate. A number of pharmacologic options are available to treat type 2 diabetes mellitus and these options have differing evidence for their cardiovascular safety. In this article, the novel agent bromocriptine quick release is discussed. Recently approved, this once-daily treatment provides glycemic control as monotherapy or in combination with other antihyperglycemic medications and has been shown in a prospective phase 3 safety study to not increase cardiovascular risk. Therefore, bromocriptine quick release increases the range of options available to treat patients with type 2 diabetes mellitus without increasing cardiovascular risk.

Lookback Option Pricing with Fixed Proportional Transaction Costs under Fractional Brownian Motion.

PubMed

Sun, Jiao-Jiao; Zhou, Shengwu; Zhang, Yan; Han, Miao; Wang, Fei

2014-01-01

The pricing problem of lookback option with a fixed proportion of transaction costs is investigated when the underlying asset price follows a fractional Brownian motion process. Firstly, using Leland's hedging method a partial differential equation satisfied by the value of the lookback option is derived. Then we obtain its numerical solution by constructing a Crank-Nicolson format. Finally, the effectiveness of the proposed form is verified through a numerical example. Meanwhile, the impact of transaction cost rate and volatility on lookback option value is discussed.

Lookback Option Pricing with Fixed Proportional Transaction Costs under Fractional Brownian Motion

PubMed Central

Sun, Jiao-Jiao; Zhou, Shengwu; Zhang, Yan; Han, Miao; Wang, Fei

2014-01-01

The pricing problem of lookback option with a fixed proportion of transaction costs is investigated when the underlying asset price follows a fractional Brownian motion process. Firstly, using Leland's hedging method a partial differential equation satisfied by the value of the lookback option is derived. Then we obtain its numerical solution by constructing a Crank-Nicolson format. Finally, the effectiveness of the proposed form is verified through a numerical example. Meanwhile, the impact of transaction cost rate and volatility on lookback option value is discussed. PMID:27433525

Future space transportation systems systems analysis study, phase 1 technical report

NASA Technical Reports Server (NTRS)

1975-01-01

The requirements of projected space programs (1985-1995) for transportation vehicles more advanced than the space shuttle are discussed. Several future program options are described and their transportation needs are analyzed. Alternative systems approaches to meeting these needs are presented.

Space station data system analysis/architecture study. Task 2: Options development DR-5. Volume 1: Technology options

NASA Technical Reports Server (NTRS)

1985-01-01

The second task in the Space Station Data System (SSDS) Analysis/Architecture Study is the development of an information base that will support the conduct of trade studies and provide sufficient data to make key design/programmatic decisions. This volume identifies the preferred options in the technology category and characterizes these options with respect to performance attributes, constraints, cost, and risk. The technology category includes advanced materials, processes, and techniques that can be used to enhance the implementation of SSDS design structures. The specific areas discussed are mass storage, including space and round on-line storage and off-line storage; man/machine interface; data processing hardware, including flight computers and advanced/fault tolerant computer architectures; and software, including data compression algorithms, on-board high level languages, and software tools. Also discussed are artificial intelligence applications and hard-wire communications.

Recent MELCOR and VICTORIA Fission Product Research at the NRC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bixler, N.E.; Cole, R.K.; Gauntt, R.O.

1999-01-21

The MELCOR and VICTORIA severe accident analysis codes, which were developed at Sandia National Laboratories for the U. S. Nuclear Regulatory Commission, are designed to estimate fission product releases during nuclear reactor accidents in light water reactors. MELCOR is an integrated plant-assessment code that models the key phenomena in adequate detail for risk-assessment purposes. VICTORIA is a more specialized fission- product code that provides detailed modeling of chemical reactions and aerosol processes under the high-temperature conditions encountered in the reactor coolant system during a severe reactor accident. This paper focuses on recent enhancements and assessments of the two codes inmore » the area of fission product chemistry modeling. Recently, a model for iodine chemistry in aqueous pools in the containment building was incorporated into the MELCOR code. The model calculates dissolution of iodine into the pool and releases of organic and inorganic iodine vapors from the pool into the containment atmosphere. The main purpose of this model is to evaluate the effect of long-term revolatilization of dissolved iodine. Inputs to the model include dose rate in the pool, the amount of chloride-containing polymer, such as Hypalon, and the amount of buffering agents in the containment. Model predictions are compared against the Radioiodine Test Facility (RTF) experiments conduced by Atomic Energy of Canada Limited (AECL), specifically International Standard Problem 41. Improvements to VICTORIA's chemical reactions models were implemented as a result of recommendations from a peer review of VICTORIA that was completed last year. Specifically, an option is now included to model aerosols and deposited fission products as three condensed phases in addition to the original option of a single condensed phase. The three-condensed-phase model results in somewhat higher predicted fission product volatilities than does the single-condensed-phase model. Modeling of U02 thermochemistry was also improved, and results in better prediction of vaporization of uranium from fuel, which can react with released fission products to affect their volatility. This model also improves the prediction of fission product release rates from fuel. Finally, recent comparisons of MELCOR and VICTORIA with International Standard Problem 40 (STORM) data are presented. These comparisons focus on predicted therrnophoretic deposition, which is the dominant deposition mechanism. Sensitivity studies were performed with the codes to examine experimental and modeling uncertainties.« less

Optimised anaerobic treatment of house-sorted biodegradable waste and slaughterhouse waste in a high loaded half technical scale digester.

PubMed

Resch, C; Grasmug, M; Smeets, W; Braun, R; Kirchmayr, R

2006-01-01

Anaerobic co-digestion of organic wastes from households, slaughterhouses and meat processing industries was optimised in a half technical scale plant. The plant was operated for 130 days using two different substrates under organic loading rates of 10 and 12 kgCOD.m(-3).d(-1). Since the substrates were rich in fat and protein components (TKN: 12 g.kg(-1) the treatment was challenging. The process was monitored on-line and in the laboratory. It was demonstrated that an intensive and stable co-digestion of partly hydrolysed organic waste and protein rich slaughterhouse waste can be achieved in the balance of inconsistent pH and buffering NH4-N. In the first experimental period the reduction of the substrate COD was almost complete in an overall stable process (COD reduction >82%). In the second period methane productivity increased, but certain intermediate products accumulated constantly. Process design options for a second digestion phase for advanced degradation were investigated. Potential causes for slow and reduced propionic and valeric acid degradation were assessed. Recommendations for full-scale process implementation can be made from the experimental results reported. The highly loaded and stable codigestion of these substrates may be a good technical and economic treatment alternative.

A guide to manufacturing CAR T cell therapies.

PubMed

Vormittag, Philipp; Gunn, Rebecca; Ghorashian, Sara; Veraitch, Farlan S

2018-02-17

In recent years, chimeric antigen receptor (CAR) modified T cells have been used as a treatment for haematological malignancies in several phase I and II trials and with Kymriah of Novartis and Yescarta of KITE Pharma, the first CAR T cell therapy products have been approved. Promising clinical outcomes have yet been tempered by the fact that many therapies may be prohibitively expensive to manufacture. The process is not yet defined, far from being standardised and often requires extensive manual handling steps. For academia, big pharma and contract manufacturers it is difficult to obtain an overview over the process strategies and their respective advantages and disadvantages. This review details current production processes being used for CAR T cells with a particular focus on efficacy, reproducibility, manufacturing costs and release testing. By undertaking a systematic analysis of the manufacture of CAR T cells from reported clinical trial data to date, we have been able to quantify recent trends and track the uptake of new process technology. Delivering new processing options will be key to the success of the CAR-T cells ensuring that excessive manufacturing costs do not disrupt the delivery of exciting new therapies to the wide possible patient cohort. Copyright © 2018 Elsevier Ltd. All rights reserved.

path integral approach to closed form pricing formulas in the Heston framework.

NASA Astrophysics Data System (ADS)

Lemmens, Damiaan; Wouters, Michiel; Tempere, Jacques; Foulon, Sven

2008-03-01

We present a path integral approach for finding closed form formulas for option prices in the framework of the Heston model. The first model for determining option prices was the Black-Scholes model, which assumed that the logreturn followed a Wiener process with a given drift and constant volatility. To provide a realistic description of the market, the Black-Scholes results must be extended to include stochastic volatility. This is achieved by the Heston model, which assumes that the volatility follows a mean reverting square root process. Current applications of the Heston model are hampered by the unavailability of fast numerical methods, due to a lack of closed-form formulae. Therefore the search for closed form solutions is an essential step before the qualitatively better stochastic volatility models will be used in practice. To attain this goal we outline a simplified path integral approach yielding straightforward results for vanilla Heston options with correlation. Extensions to barrier options and other path-dependent option are discussed, and the new derivation is compared to existing results obtained from alternative path-integral approaches (Dragulescu, Kleinert).

A Refreshable, On-line Cache for HST Data Retrieval

NASA Astrophysics Data System (ADS)

Fraquelli, Dorothy A.; Ellis, Tracy A.; Ridgaway, Michael; DPAS Team

2016-01-01

We discuss upgrades to the HST Data Processing System, with an emphasis on the changes Hubble Space Telescope (HST) Archive users will experience. In particular, data are now held on-line (in a cache) removing the need to reprocess the data every time they are requested from the Archive. OTFR (on the fly reprocessing) has been replaced by a reprocessing system, which runs in the background. Data in the cache are automatically placed in the reprocessing queue when updated calibration reference files are received or when an improved calibration algorithm is installed. Data in the on-line cache are expected to be the most up to date version. These changes were phased in throughout 2015 for all active instruments.The on-line cache was populated instrument by instrument over the course of 2015. As data were placed in the cache, the flag that triggers OTFR was reset so that OTFR no longer runs on these data. "Hybrid" requests to the Archive are handled transparently, with data not yet in the cache provided via OTFR and the remaining data provided from the cache. Users do not need to make separate requests.Users of the MAST Portal will be able to download data from the cache immediately. For data not in the cache, the Portal will send the user to the standard "Retrieval Options Page," allowing the user to direct the Archive to process and deliver the data.The classic MAST Search and Retrieval interface has the same look and feel as previously. Minor changes, unrelated to the cache, have been made to the format of the Retrieval Options Page.

Exploring the statistical and clinical impact of two interim analyses on the Phase II design with option for direct assignment.

PubMed

An, Ming-Wen; Mandrekar, Sumithra J; Edelman, Martin J; Sargent, Daniel J

2014-07-01

The primary goal of Phase II clinical trials is to understand better a treatment's safety and efficacy to inform a Phase III go/no-go decision. Many Phase II designs have been proposed, incorporating randomization, interim analyses, adaptation, and patient selection. The Phase II design with an option for direct assignment (i.e. stop randomization and assign all patients to the experimental arm based on a single interim analysis (IA) at 50% accrual) was recently proposed [An et al., 2012]. We discuss this design in the context of existing designs, and extend it from a single-IA to a two-IA design. We compared the statistical properties and clinical relevance of the direct assignment design with two IA (DAD-2) versus a balanced randomized design with two IA (BRD-2) and a direct assignment design with one IA (DAD-1), over a range of response rate ratios (2.0-3.0). The DAD-2 has minimal loss in power (<2.2%) and minimal increase in T1ER (<1.6%) compared to a BRD-2. As many as 80% more patients were treated with experimental vs. control in the DAD-2 than with the BRD-2 (experimental vs. control ratio: 1.8 vs. 1.0), and as many as 64% more in the DAD-2 than with the DAD-1 (1.8 vs. 1.1). We illustrate the DAD-2 using a case study in lung cancer. In the spectrum of Phase II designs, the direct assignment design, especially with two IA, provides a middle ground with desirable statistical properties and likely appeal to both clinicians and patients. Copyright © 2014 Elsevier Inc. All rights reserved.

Designing flexible engineering systems utilizing embedded architecture options

NASA Astrophysics Data System (ADS)

Pierce, Jeff G.

This dissertation develops and applies an integrated framework for embedding flexibility in an engineered system architecture. Systems are constantly faced with unpredictability in the operational environment, threats from competing systems, obsolescence of technology, and general uncertainty in future system demands. Current systems engineering and risk management practices have focused almost exclusively on mitigating or preventing the negative consequences of uncertainty. This research recognizes that high uncertainty also presents an opportunity to design systems that can flexibly respond to changing requirements and capture additional value throughout the design life. There does not exist however a formalized approach to designing appropriately flexible systems. This research develops a three stage integrated flexibility framework based on the concept of architecture options embedded in the system design. Stage One defines an eight step systems engineering process to identify candidate architecture options. This process encapsulates the operational uncertainty though scenario development, traces new functional requirements to the affected design variables, and clusters the variables most sensitive to change. The resulting clusters can generate insight into the most promising regions in the architecture to embed flexibility in the form of architecture options. Stage Two develops a quantitative option valuation technique, grounded in real options theory, which is able to value embedded architecture options that exhibit variable expiration behavior. Stage Three proposes a portfolio optimization algorithm, for both discrete and continuous options, to select the optimal subset of architecture options, subject to budget and risk constraints. Finally, the feasibility, extensibility and limitations of the framework are assessed by its application to a reconnaissance satellite system development problem. Detailed technical data, performance models, and cost estimates were compiled for the Tactical Imaging Constellation Architecture Study and leveraged to complete a realistic proof-of-concept.

Cost-utility evaluation of vortioxetine in patients with Major Depressive Disorder experiencing inadequate response to alternative antidepressants in the United Kingdom.

PubMed

Young, A H; Evitt, L; Brignone, M; Diamand, F; Atsou, K; Campbell, R; Cure, S; Danchenko, N

2017-08-15

Patients frequently require several lines of therapy for treatment of major depressive episodes. This economic analysis details the management of patients who responded inadequately due to lack of efficacy or intolerability to two previous antidepressants in the UK. The model included a decision tree and a Markov component. Health states considered in the decision tree were remission, response, no response, withdrawal due to adverse events, relapse, recovery, and recurrence. The time horizon was 24 months. Patients were on third-line treatment for up to a 3-month acute phase and a 6-month maintenance phase. As third-line efficacy data were not available, inputs were calculated by adjusting original second-line data to third-line based on proportionate reductions observed in STAR*D. Equivalent efficacy was assumed for all comparators. Healthcare resource use and utilities were based on UK estimates. Vortioxetine was a cost-effective treatment option at a threshold of £20,000/QALY vs. escitalopram, citalopram, sertraline, and was associated with more health benefits, less costs (was dominant) versus relevant third-line comparators venlafaxine and duloxetine. Agomelatine was found not to be a cost-effective option. The 22-month maintenance phase treatment scenario results were similar to the 6-month base case. Third-line efficacy data were not available. This highlights the need for studies in patients receiving third-line treatment. This model provides an overview for the management of patients receiving third-line treatment where limited evidence currently exists. Vortioxetine, with its novel mechanism of action, is expected to be a dominant treatment option versus relevant comparators in the UK. Copyright © 2017. Published by Elsevier B.V.

Estimation and evaluation of management options to control and/or reduce the risk of not complying with commercial sterility.

PubMed

Pujol, Laure; Albert, Isabelle; Magras, Catherine; Johnson, Nicholas Brian; Membré, Jeanne-Marie

2015-11-20

In a previous study, a modular process risk model, from the raw material reception to the final product storage, was built to estimate the risk of a UHT-aseptic line of not complying with commercial sterility (Pujol et al., 2015). This present study was focused on demonstrating how the model (updated version with uncertainty and variability separated and 2(nd) order Monte Carlo procedure run) could be used to assess quantitatively the influence of management options. This assessment was done in three steps: pinpoint which process step had the highest influence on the risk, identify which management option(s) could be the most effective to control and/or reduce the risk, and finally evaluate quantitatively the influence of changing process setting(s) on the risk. For Bacillus cereus, it was identified that during post-process storage in an aseptic tank, there was potentially an air re-contamination due to filter efficiency loss (efficiency loss due to successive in-place sterilizations after cleaning operations), followed by B. cereus growth. Two options were then evaluated: i) reducing by one fifth of the number of filter sterilizations before renewing the filters, ii) designing new UHT-aseptic lines without an aseptic tank, i.e. without a storage period after the thermal process and before filling. Considering the uncertainty in the model, it was not possible to confirm whether these options had a significant influence on the risk associated with B. cereus. On the other hand, for Geobacillus stearothermophilus, combinations of heat-treatment time and temperature enabling the control or reduction in risk by a factor of ca. 100 were determined; for ease of operational implementation, they were presented graphically in the form of iso-risk curves. For instance, it was established that a heat treatment of 138°C for 31s (instead of 138°C for 25s) enabled a reduction in risk to 18×10(-8) (95% CI=[10; 34]×10(-8)), instead of 578×10(-8) (95% CI=[429; 754]×10(-8)) initially. In conclusion, a modular risk model, as the one exemplified here with a UHT-aseptic line, is a valuable tool in process design and operation, bringing definitive quantitative elements into the decision making process. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of the e-Baby serious game with regard to the evaluation of oxygenation in preterm babies: contributions of the emotional design.

PubMed

Fonseca, Luciana Mara Monti; Dias, Danielle Monteiro Vilela; Góes, Fernanda Dos Santos Nogueira; Seixas, Carlos Alberto; Scochi, Carmen Gracinda Silvan; Martins, José Carlos Amado; Rodrigues, Manuel Alves

2014-09-01

The present study aimed to describe the development process of a serious game that enables users to evaluate the respiratory process in a preterm infant based on an emotional design model. The e-Baby serious game was built to feature the simulated environment of an incubator, in which the user performs a clinical evaluation of the respiratory process in a virtual preterm infant. The user learns about the preterm baby's history, chooses the tools for the clinical evaluation, evaluates the baby, and determines whether his/her evaluation is appropriate. The e-Baby game presents phases that contain respiratory process impairments of higher or lower complexity in the virtual preterm baby. Included links give the user the option of recording the entire evaluation procedure and sharing his/her performance on a social network. e-Baby integrates a Clinical Evaluation of the Preterm Baby course in the Moodle virtual environment. This game, which evaluates the respiratory process in preterm infants, could support a more flexible, attractive, and interactive teaching and learning process that includes simulations with features very similar to neonatal unit realities, thus allowing more appropriate training for clinical oxygenation evaluations in at-risk preterm infants. e-Baby allows advanced user-technology-educational interactions because it requires active participation in the process and is emotionally integrated.

A Combined Solar Electric and Storable Chemical Propulsion Vehicle for Piloted Mars Missions

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Oleson, Steven R.; Drake, Bret G.

2014-01-01

The Mars Design Reference Architecture (DRA) 5.0 explored a piloted Mars mission in the 2030 timeframe, focusing on architecture and technology choices. The DRA 5.0 focused on nuclear thermal and cryogenic chemical propulsion system options for the mission. Follow-on work explored both nuclear and solar electric options. One enticing option that was found in a NASA Collaborative Modeling for Parametric Assessment of Space Systems (COMPASS) design study used a combination of a 1-MW-class solar electric propulsion (SEP) system combined with storable chemical systems derived from the planned Orion crew vehicle. It was found that by using each propulsion system at the appropriate phase of the mission, the entire SEP stage and habitat could be placed into orbit with just two planned Space Launch System (SLS) heavy lift launch vehicles assuming the crew would meet up at the Earth-Moon (E-M) L2 point on a separate heavy-lift launch. These appropriate phases use high-thrust chemical propulsion only in gravity wells when the vehicle is piloted and solar electric propulsion for every other phase. Thus the SEP system performs the spiral of the unmanned vehicle from low Earth orbit (LEO) to E-M L2 where the vehicle meets up with the multi-purpose crew vehicle. From here SEP is used to place the vehicle on a trajectory to Mars. With SEP providing a large portion of the required capture and departure changes in velocity (delta V) at Mars, the delta V provided by the chemical propulsion is reduced by a factor of five from what would be needed with chemical propulsion alone at Mars. This trajectory also allows the SEP and habitat vehicle to arrive in the highly elliptic 1-sol parking orbit compatible with envisioned Mars landing concepts. This paper explores mission options using between SEP and chemical propulsion, the design of the SEP system including the solar array and electric propulsion systems, and packaging in the SLS shroud. Design trades of stay time, power level, specific impulse and propellant type are discussed.

A Combined Solar Electric and Storable Chemical Propulsion Vehicle for Piloted Mars Missions

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Oleson, Steven R.; Drake, Bret

2013-01-01

The Mars Design Reference Architecture (DRA) 5.0 explored a piloted Mars mission in the 2030 timeframe, focusing on architecture and technology choices. The DRA 5.0 focused on nuclear thermal and cryogenic chemical propulsion system options for the mission. Follow-on work explored both nuclear and solar electric options. One enticing option that was found in a NASA Collaborative Modeling for Parametric Assessment of Space Systems (COMPASS) design study used a combination of a 1-MW-class solar electric propulsion (SEP) system combined with storable chemical systems derived from the planned Orion crew vehicle. It was found that by using each propulsion system at the appropriate phase of the mission, the entire SEP stage and habitat could be placed into orbit with just two planned Space Launch System (SLS) heavy lift launch vehicles assuming the crew would meet up at the Earth-Moon (E-M) L2 point on a separate heavy-lift launch. These appropriate phases use high-thrust chemical propulsion only in gravity wells when the vehicle is piloted and solar electric propulsion for every other phase. Thus the SEP system performs the spiral of the unmanned vehicle from low Earth orbit (LEO) to E-M L2 where the vehicle meets up with the multi-purpose crew vehicle. From here SEP is used to place the vehicle on a trajectory to Mars. With SEP providing a large portion of the required capture and departure changes in velocity (delta V) at Mars, the delta V provided by the chemical propulsion is reduced by a factor of five from what would be needed with chemical propulsion alone at Mars. This trajectory also allows the SEP and habitat vehicle to arrive in the highly elliptic 1-sol parking orbit compatible with envisioned Mars landing concepts. This paper explores mission options using between SEP and chemical propulsion, the design of the SEP system including the solar array and electric propulsion systems, and packaging in the SLS shroud. Design trades of stay time, power level, specific impulse and propellant type are discussed.

Using real options analysis to support strategic management decisions

NASA Astrophysics Data System (ADS)

Kabaivanov, Stanimir; Markovska, Veneta; Milev, Mariyan

2013-12-01

Decision making is a complex process that requires taking into consideration multiple heterogeneous sources of uncertainty. Standard valuation and financial analysis techniques often fail to properly account for all these sources of risk as well as for all sources of additional flexibility. In this paper we explore applications of a modified binomial tree method for real options analysis (ROA) in an effort to improve decision making process. Usual cases of use of real options are analyzed with elaborate study on the applications and advantages that company management can derive from their application. A numeric results based on extending simple binomial tree approach for multiple sources of uncertainty are provided to demonstrate the improvement effects on management decisions.

Generating Options for Active Risk Control (GO-ARC): introducing a novel technique.

PubMed

Card, Alan J; Ward, James R; Clarkson, P John

2014-01-01

After investing significant amounts of time and money in conducting formal risk assessments, such as root cause analysis (RCA) or failure mode and effects analysis (FMEA), healthcare workers are left to their own devices in generating high-quality risk control options. They often experience difficulty in doing so, and tend toward an overreliance on administrative controls (the weakest category in the hierarchy of risk controls). This has important implications for patient safety and the cost effectiveness of risk management operations. This paper describes a before and after pilot study of the Generating Options for Active Risk Control (GO-ARC) technique, a novel tool to improve the quality of the risk control options generation process. The quantity, quality (using the three-tiered hierarchy of risk controls), variety, and novelty of risk controls generated. Use of the GO-ARC technique was associated with improvement on all measures. While this pilot study has some notable limitations, it appears that the GO-ARC technique improved the risk control options generation process. Further research is needed to confirm this finding. It is also important to note that improved risk control options are a necessary, but not sufficient, step toward the implementation of more robust risk controls. © 2013 National Association for Healthcare Quality.

Guidelines To Validate Control of Cross-Contamination during Washing of Fresh-Cut Leafy Vegetables.

PubMed

Gombas, D; Luo, Y; Brennan, J; Shergill, G; Petran, R; Walsh, R; Hau, H; Khurana, K; Zomorodi, B; Rosen, J; Varley, R; Deng, K

2017-02-01

The U.S. Food and Drug Administration requires food processors to implement and validate processes that will result in significantly minimizing or preventing the occurrence of hazards that are reasonably foreseeable in food production. During production of fresh-cut leafy vegetables, microbial contamination that may be present on the product can spread throughout the production batch when the product is washed, thus increasing the risk of illnesses. The use of antimicrobials in the wash water is a critical step in preventing such water-mediated cross-contamination; however, many factors can affect antimicrobial efficacy in the production of fresh-cut leafy vegetables, and the procedures for validating this key preventive control have not been articulated. Producers may consider three options for validating antimicrobial washing as a preventive control for cross-contamination. Option 1 involves the use of a surrogate for the microbial hazard and the demonstration that cross-contamination is prevented by the antimicrobial wash. Option 2 involves the use of antimicrobial sensors and the demonstration that a critical antimicrobial level is maintained during worst-case operating conditions. Option 3 validates the placement of the sensors in the processing equipment with the demonstration that a critical antimicrobial level is maintained at all locations, regardless of operating conditions. These validation options developed for fresh-cut leafy vegetables may serve as examples for validating processes that prevent cross-contamination during washing of other fresh produce commodities.

Setting Priorities in Global Child Health Research Investments: Guidelines for Implementation of the CHNRI Method

PubMed Central

Rudan, Igor; Gibson, Jennifer L.; Ameratunga, Shanthi; El Arifeen, Shams; Bhutta, Zulfiqar A.; Black, Maureen; Black, Robert E.; Brown, Kenneth H.; Campbell, Harry; Carneiro, Ilona; Chan, Kit Yee; Chandramohan, Daniel; Chopra, Mickey; Cousens, Simon; Darmstadt, Gary L.; Gardner, Julie Meeks; Hess, Sonja Y.; Hyder, Adnan A.; Kapiriri, Lydia; Kosek, Margaret; Lanata, Claudio F.; Lansang, Mary Ann; Lawn, Joy; Tomlinson, Mark; Tsai, Alexander C.; Webster, Jayne

2008-01-01

This article provides detailed guidelines for the implementation of systematic method for setting priorities in health research investments that was recently developed by Child Health and Nutrition Research Initiative (CHNRI). The target audience for the proposed method are international agencies, large research funding donors, and national governments and policy-makers. The process has the following steps: (i) selecting the managers of the process; (ii) specifying the context and risk management preferences; (iii) discussing criteria for setting health research priorities; (iv) choosing a limited set of the most useful and important criteria; (v) developing means to assess the likelihood that proposed health research options will satisfy the selected criteria; (vi) systematic listing of a large number of proposed health research options; (vii) pre-scoring check of all competing health research options; (viii) scoring of health research options using the chosen set of criteria; (ix) calculating intermediate scores for each health research option; (x) obtaining further input from the stakeholders; (xi) adjusting intermediate scores taking into account the values of stakeholders; (xii) calculating overall priority scores and assigning ranks; (xiii) performing an analysis of agreement between the scorers; (xiv) linking computed research priority scores with investment decisions; (xv) feedback and revision. The CHNRI method is a flexible process that enables prioritizing health research investments at any level: institutional, regional, national, international, or global. PMID:19090596

A pilot evaluation of text display formats for weather information in the cockpit

DOT National Transportation Integrated Search

1995-10-01

This study focuses on the weather (WX) services portion of Data Link. A : two-phase evaluation was conducted with 16 air transport (ATP) and general : aviation (GA) pilots. The pilots evaluated four data formatting options and : four data entry metho...

Area computer model for transportation noise prediction : phase II--improved noise prediction methods.

DOT National Transportation Integrated Search

1975-01-01

This report recommended that NOISE 3 initially use the same basic logic as the MICNOISE program for highway noise prediction except that additional options be made available, such as flexibility in specifying vehicle noise sources. A choice of six no...

40 CFR 80.537-80.539 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

....537-80.539 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Temporary Compliance Option §§ 80.537-80.539 [Reserved] Geographic Phase...

Solar power satellite system definition study. Volume 5, phase 1: Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

An analysis of the solar power satellite system is presented. Performance, cost, and operational characteristics are assessed. The photovoltaic system is described and investigated. Alternative construction concepts are discussed. The structural bay configuration is presented along with the antenna structure options.

THE ACID RAIN NOX PROGRAM

EPA Science Inventory

Between 350,000 and 400,000 tons of annual NOx emissions have been eliminated as a result of Phase I of the Acid Rain NOx Program. As expected. the utilities have chosen emissions averaging as the primary compliance option. This reflects that, in general, NO x reductions have ...

Preparation of porphyrins and their metal complexes

DOEpatents

Ellis, Jr., Paul E.; Langdale, Wayne A.

1997-01-01

A hydroxyl-containing pyrrolic compound having a hydroxyl group or a hydroxyl-containing group in the 2-position, optionally substituted in the beta positions, is condensed in an acidified two immiscible phase solvent system to produce excellent yields of the corresponding porphyrin or metal porphyrin.

Preparation of porphyrins and their metal complexes

DOEpatents

Ellis, P.E. Jr.; Langdale, W.A.

1997-08-19

A hydroxyl-containing pyrrolic compound having a hydroxyl group or a hydroxyl-containing group in the 2-position, optionally substituted in the beta positions, is condensed in an acidified two immiscible phase solvent system to produce excellent yields of the corresponding porphyrin or metal porphyrin.

The experience of freedom in decisions - Questioning philosophical beliefs in favor of psychological determinants.

PubMed

Lau, Stephan; Hiemisch, Anette; Baumeister, Roy F

2015-05-01

Six experiments tested two competing models of subjective freedom during decision-making. The process model is mainly based on philosophical conceptions of free will and assumes that features of the process of choosing affect subjective feelings of freedom. In contrast, the outcome model predicts that subjective freedom is due to positive outcomes that can be expected or are achieved by a decision. Results heavily favored the outcome model over the process model. For example, participants felt freer when choosing between two equally good than two equally bad options. Process features including number of options, complexity of decision, uncertainty, having the option to defer the decision, conflict among reasons, and investing high effort in choosing generally had no or even negative effects on subjective freedom. In contrast, participants reported high freedom with good outcomes and low freedom with bad outcomes, and ease of deciding increased subjective freedom, consistent with the outcome model. Copyright © 2014 Elsevier Inc. All rights reserved.

Current decision-making in prostate cancer therapy.

PubMed

Cox, Jared; Amling, Christopher L

2008-05-01

Prostate cancer continues to be the most prevalent cancer among American men. Localized prostate cancer is commonly diagnosed because of improved screening practices nationwide. Several options exist for the treatment of localized prostate cancer, and this review discusses the decision-making process facing patients diagnosed with this disease. No one treatment for localized prostate cancer has proven superior to date. For this reason patients have been found to use a number of resources to make an informed decision. These include physicians, spouses, family, friends, and different media. Urologists serve as the primary and most influential physicians and play an important role in the decision-making process. Patients, however, are assuming a more active role in this process as time evolves, especially with ease of access to multiple information resources. In deciding on a treatment for localized prostate cancer, patients must weigh the risks and benefits of each option. Urologists must provide patients with up-to-date information on these options and be aware of the different influences that surround these men during the decision-making process.

Pricing foreign equity option under stochastic volatility tempered stable Lévy processes

NASA Astrophysics Data System (ADS)

Gong, Xiaoli; Zhuang, Xintian

2017-10-01

Considering that financial assets returns exhibit leptokurtosis, asymmetry properties as well as clustering and heteroskedasticity effect, this paper substitutes the logarithm normal jumps in Heston stochastic volatility model by the classical tempered stable (CTS) distribution and normal tempered stable (NTS) distribution to construct stochastic volatility tempered stable Lévy processes (TSSV) model. The TSSV model framework permits infinite activity jump behaviors of return dynamics and time varying volatility consistently observed in financial markets through subordinating tempered stable process to stochastic volatility process, capturing leptokurtosis, fat tailedness and asymmetry features of returns. By employing the analytical characteristic function and fast Fourier transform (FFT) technique, the formula for probability density function (PDF) of TSSV returns is derived, making the analytical formula for foreign equity option (FEO) pricing available. High frequency financial returns data are employed to verify the effectiveness of proposed models in reflecting the stylized facts of financial markets. Numerical analysis is performed to investigate the relationship between the corresponding parameters and the implied volatility of foreign equity option.

The End-of-Life Phase of High-Grade Glioma Patients: Dying With Dignity?

PubMed Central

Taphoorn, Martin J.B.; Uitdehaag, Bernard; Heimans, Jan J.; Deliens, Luc; Reijneveld, Jaap C.; Pasman, H. Roeline W.

2013-01-01

Background. In the end-of-life (EOL) phase, high-grade glioma (HGG) patients have a high symptom burden and often lose independence because of physical and cognitive dysfunction. This might affect the patient's personal dignity. We aimed to (a) assess the proportion of HGG patients dying with dignity as perceived by their relatives and (b) identify disease and care factors correlated with dying with dignity in HGG patients. Methods. We approached relatives of a cohort of 155 deceased HGG patients for the study. Participants completed a questionnaire concerning the EOL phase of the patient, covering several subthemes: (a) symptoms and signs, (b) health-related quality of life, (c) decision making, (d) place and quality of EOL care, and (e) dying with dignity. Results. Relatives of 81 patients participated and 75% indicated that the patient died with dignity. These patients had fewer communication deficits, experienced fewer transitions between health care settings in the EOL phase, and more frequently died at their preferred place of death. Relatives were more satisfied with the physician providing EOL care and reported that the physician adequately explained treatment options. Multivariate analysis identified satisfaction with the physician, the ability to communicate, and the absence of transitions between settings as most predictive of a dignified death. Conclusions. Physicians caring for HGG patients in the EOL phase should timely focus on explaining possible treatment options, because patients experience communication deficits toward death. Physicians should strive to allow patients to die at their preferred place and avoid transitions during the last month of life. PMID:23335620

Energy storage options for space power

NASA Astrophysics Data System (ADS)

Hoffman, H. W.; Martin, J. F.; Olszewski, M.

Including energy storage in a space power supply enhances the feasibility of using thermal power cycles (Rankine or Brayton) and providing high-power pulses. Superconducting magnets, capacitors, electrochemical batteries, thermal phase-change materials (PCM), and flywheels are assessed; the results obtained suggest that flywheels and phase-change devices hold the most promise. Latent heat storage using inorganic salts and metallic eutectics offers thermal energy storage densities of 1500 kJ/kg to 2000 kJ/kg at temperatures to 1675 K. Innovative techniques allow these media to operate in direct contact with the heat engine working fluid. Enhancing thermal conductivity and/or modifying PCM crystallization habit provide other options. Flywheels of low-strain graphite and Kevlar fibers have achieved mechanical energy storage densities of 300 kJ/kg. With high-strain graphite fibers, storage densities appropriate to space power needs (about 500 kJ/kg) seem feasible. Coupling advanced flywheels with emerging high power density homopolar generators and compulsators could result in electric pulse-power storage modules of significantly higher energy density.

Standard spacecraft procurement analysis: A case study in NASA-DoD coordination in space programs. Ph.D. Thesis - Rand Graduate Inst.

NASA Technical Reports Server (NTRS)

Harris, E. D.

1980-01-01

The Space Test Program Standard Satellite (STPSS), a design proposed by the Air Force, and two NASA candidates, the Applications Explorer Mission spacecraft (AEM) and the Multimission Modular Spacecraft (MMS), were considered during the first phase. During the second phase, a fourth candidate was introduced, a larger, more capable AEM (L-AEM), configured by the Boeing Company under NASA sponsorship to meet the specifications jointly agreed upon by NASA and the Air Force. Total program costs for a variety of procurement options, each of which is capable of performing all of the Air Force Space Test Program missions during the 1980-1990 time period, were used as the principal measure for distinguishing among procurement options. Program cost does not provide a basis for choosing among the AEM, STPSS, and MMS spacecraft, given their present designs. The availability of the L-AEM spacecraft, or some very similar design, would provide a basis for minimizing the cost of the Air Force Space Test Program.

Paperless medical records: measuring success.

PubMed

Tobey, Mary Ellen

2004-01-01

North Shore Magnetic Imaging Center (NSMIC) underwent a major transformation of the patient process through an 18-month "Reinvention Project." The project began in October 2002, with an assessment of systems in place. A complete review of each stage of the patient process--scheduling, registration, insurance verification, screening, scanning, transcription, and billing--resulted in the discovery that the paperwork for a single patient examination could go though as many as 20 sets of hands. The project was supported by the formation of an internal team comprised of staff members from all departments (support, patient accounts, and technical), radiologists, and members of the center's senior management team. The team had 2 goals: increase the level of patient care, and create a paperless environment. External teams were formed to address specific areas targeted to support the process. The transformation for all involved--patients, staff, radiologists, and referring physicians--has proved to be very positive. The work, however, was not finished. Upon the project's completion, NSMIC recognized the importance of identifying successes and areas for improvement. These included ongoing reviews of the project's impact on all stakeholders and looking for new technologies and programs to enhance the new systems in place. There are plans for a project "sequel." Strategies are being developed for "Reinvention, Phase II." Elements of these strategies include enhancement of the scheduling programs to create more checks and balances for the staff and investigating an online scheduling option for the center's referring physicians. The purchase and implementation of a voice recognition system--tabled during Phase I--is scheduled for the first quarter of 2005.

Multiorgan failure in the serious trauma patient.

PubMed

Llompart-Pou, J A; Talayero, M; Homar, J; Royo, C

2014-10-01

Multiorgan failure remains one of the leading causes of late morbidity and mortality after severe trauma. In the early phase, it is related with an uncontrolled hyper-inflammation state, whereas in the late phase (>72 h), septic complications play a major role. We review the underlying pathophysiology, the evaluation with different scales and the clinical factors associated with multiorgan failure, as well as potential treatment options. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

[Sedation in the terminal phase of life].

PubMed

Verhagen, E H; Eliel, M R; de Graeff, A; Teunissen, S C

1999-12-25

In 2 patients, a woman aged 38 years and a man aged 48 years, in the terminal phase of life due to metastasized+ malignancy, palliative care failed. They suffered seriously from pain, delirium, restlessness, nausea, and fear. Deep sedation was given to induce almost continuous sleep without the intention of causing death. After one and five quiet days respectively the patients died. Deep sedation is an option when palliative care fails to diminish serious suffering. Midazolam, given by continuous subcutaneous infusion is the drug of choice.

Long-Term Management Strategy for Dredged Material Disposal for Naval Weapons Station, Yorktown, Yorktown, Virginia; Naval Supply Center, Cheatham Annex, Williamsburg, Virginia; and Naval Amphibious Base, Little Creek, Norfolk, Virginia. Phase 2: Formulation of Alternatives

DTIC Science & Technology

1993-03-01

Regulatory Framework and Management Strategy ... .......... 11 Need for Criteria ............... ........................ .. 12 Criteria for Open-Water... Framework and Managetent Strategy 19. Because the Phase I results indicated that there is insufficient confined disposal capacity, the assessment of open...regulatory framework established for Sections 103 and 404. 11 20. All disposal options considered for this LTMS were examined using the Corps Management

Oral health considerations in anorexia and bulimia nervosa. 2. Multidisciplinary management and personalized dental care.

PubMed

Bassiouny, Mohamed A; Tweddale, Elizabeth

2017-01-01

This article outlines a comprehensive, multidisciplinary strategy for treatment of patients with anorexia and bulimia nervosa. In this approach, primary medical intervention and emergency dental care are followed by the staging of treatment phases that integrate medical care, psychotherapy, nutritional counseling, and dental management, which may encompass various treatment options for repair of damaged dentition. Emphasis is placed on prevention of further tissue damage during all phases of management and following completion of the treatment course.

Valuing options in shot noise market

NASA Astrophysics Data System (ADS)

Laskin, Nick

2018-07-01

A new exactly solvable option pricing model has been introduced and elaborated. It is assumed that a stock price follows a Geometric shot noise process. An arbitrage-free integro-differential option pricing equation has been obtained and solved. The new Greeks have been analytically calculated. It has been shown that in diffusion approximation the developed option pricing model incorporates the well-known Black-Scholes equation and its solution. The stochastic dynamic origin of the Black-Scholes volatility has been uncovered. To model the observed market stock price patterns consisting of high frequency small magnitude and low frequency large magnitude jumps, the superposition of two Geometric shot noises has been implemented. A new generalized option pricing equation has been obtained and its exact solution was found. Merton's jump-diffusion formula for option price was recovered in diffusion approximation. Despite the non-Gaussian nature of probability distributions involved, the new option pricing model has the same degree of analytical tractability as the Black-Scholes model and the Merton jump-diffusion model. This attractive feature allows one to derive exact formulas to value options and option related instruments in the market with jump-like price patterns.

Sequenced treatment alternatives to relieve depression (STAR*D): rationale and design.

PubMed

Rush, A John; Fava, Maurizio; Wisniewski, Stephen R; Lavori, Philip W; Trivedi, Madhukar H; Sackeim, Harold A; Thase, Michael E; Nierenberg, Andrew A; Quitkin, Frederic M; Kashner, T Michael; Kupfer, David J; Rosenbaum, Jerrold F; Alpert, Jonathan; Stewart, Jonathan W; McGrath, Patrick J; Biggs, Melanie M; Shores-Wilson, Kathy; Lebowitz, Barry D; Ritz, Louise; Niederehe, George

2004-02-01

STAR*D is a multisite, prospective, randomized, multistep clinical trial of outpatients with nonpsychotic major depressive disorder. The study compares various treatment options for those who do not attain a satisfactory response with citalopram, a selective serotonin reuptake inhibitor antidepressant. The study enrolls 4000 adults (ages 18-75) from both primary and specialty care practices who have not had either a prior inadequate response or clear-cut intolerance to a robust trial of protocol treatments during the current major depressive episode. After receiving citalopram (level 1), participants without sufficient symptomatic benefit are eligible for randomization to level 2 treatments, which entail four switch options (sertraline, bupropion, venlafaxine, cognitive therapy) and three citalopram augment options (bupropion, buspirone, cognitive therapy). Those who receive cognitive therapy (switch or augment options) at level 2 without sufficient improvement are eligible for randomization to one of two level 2A switch options (venlafaxine or bupropion). Level 2 and 2A participants are eligible for random assignment to two switch options (mirtazapine or nortriptyline) and to two augment options (lithium or thyroid hormone) added to the primary antidepressant (citalopram, bupropion, sertraline, or venlafaxine) (level 3). Those without sufficient improvement at level 3 are eligible for level 4 random assignment to one of two switch options (tranylcypromine or the combination of mirtazapine and venlafaxine). The primary outcome is the clinician-rated, 17-item Hamilton Rating Scale for Depression, administered at entry and exit from each treatment level through telephone interviews by assessors masked to treatment assignments. Secondary outcomes include self-reported depressive symptoms, physical and mental function, side-effect burden, client satisfaction, and health care utilization and cost. Participants with an adequate symptomatic response may enter the 12-month naturalistic follow-up phase with brief monthly and more complete quarterly assessments.

Tailored and Integrated Web-Based Tools for Improving Psychosocial Outcomes of Cancer Patients: The DoTTI Development Framework

PubMed Central

Bryant, Jamie; Sanson-Fisher, Rob; Tzelepis, Flora; Henskens, Frans; Paul, Christine; Stevenson, William

2014-01-01

Background Effective communication with cancer patients and their families about their disease, treatment options, and possible outcomes may improve psychosocial outcomes. However, traditional approaches to providing information to patients, including verbal information and written booklets, have a number of shortcomings centered on their limited ability to meet patient preferences and literacy levels. New-generation Web-based technologies offer an innovative and pragmatic solution for overcoming these limitations by providing a platform for interactive information seeking, information sharing, and user-centered tailoring. Objective The primary goal of this paper is to discuss the advantages of comprehensive and iterative Web-based technologies for health information provision and propose a four-phase framework for the development of Web-based information tools. Methods The proposed framework draws on our experience of constructing a Web-based information tool for hematological cancer patients and their families. The framework is based on principles for the development and evaluation of complex interventions and draws on the Agile methodology of software programming that emphasizes collaboration and iteration throughout the development process. Results The DoTTI framework provides a model for a comprehensive and iterative approach to the development of Web-based informational tools for patients. The process involves 4 phases of development: (1) Design and development, (2) Testing early iterations, (3) Testing for effectiveness, and (4) Integration and implementation. At each step, stakeholders (including researchers, clinicians, consumers, and programmers) are engaged in consultations to review progress, provide feedback on versions of the Web-based tool, and based on feedback, determine the appropriate next steps in development. Conclusions This 4-phase framework is evidence-informed and consumer-centered and could be applied widely to develop Web-based programs for a diverse range of diseases. PMID:24641991

A multiplexed microfluidic toolbox for the rapid optimization of affinity-driven partition in aqueous two phase systems.

PubMed

Bras, Eduardo J S; Soares, Ruben R G; Azevedo, Ana M; Fernandes, Pedro; Arévalo-Rodríguez, Miguel; Chu, Virginia; Conde, João P; Aires-Barros, M Raquel

2017-09-15

Antibodies and other protein products such as interferons and cytokines are biopharmaceuticals of critical importance which, in order to be safely administered, have to be thoroughly purified in a cost effective and efficient manner. The use of aqueous two-phase extraction (ATPE) is a viable option for this purification, but these systems are difficult to model and optimization procedures require lengthy and expensive screening processes. Here, a methodology for the rapid screening of antibody extraction conditions using a microfluidic channel-based toolbox is presented. A first microfluidic structure allows a simple negative-pressure driven rapid screening of up to 8 extraction conditions simultaneously, using less than 20μL of each phase-forming solution per experiment, while a second microfluidic structure allows the integration of multi-step extraction protocols based on the results obtained with the first device. In this paper, this microfluidic toolbox was used to demonstrate the potential of LYTAG fusion proteins used as affinity tags to optimize the partitioning of antibodies in ATPE processes, where a maximum partition coefficient (K) of 9.2 in a PEG 3350/phosphate system was obtained for the antibody extraction in the presence of the LYTAG-Z dual ligand. This represents an increase of approx. 3.7 fold when compared with the same conditions without the affinity molecule (K=2.5). Overall, this miniaturized and versatile approach allowed the rapid optimization of molecule partition followed by a proof-of-concept demonstration of an integrated back extraction procedure, both of which are critical procedures towards obtaining high purity biopharmaceuticals using ATPE. Copyright © 2017 Elsevier B.V. All rights reserved.

Tailored and integrated Web-based tools for improving psychosocial outcomes of cancer patients: the DoTTI development framework.

PubMed

Smits, Rochelle; Bryant, Jamie; Sanson-Fisher, Rob; Tzelepis, Flora; Henskens, Frans; Paul, Christine; Stevenson, William

2014-03-14

Effective communication with cancer patients and their families about their disease, treatment options, and possible outcomes may improve psychosocial outcomes. However, traditional approaches to providing information to patients, including verbal information and written booklets, have a number of shortcomings centered on their limited ability to meet patient preferences and literacy levels. New-generation Web-based technologies offer an innovative and pragmatic solution for overcoming these limitations by providing a platform for interactive information seeking, information sharing, and user-centered tailoring. The primary goal of this paper is to discuss the advantages of comprehensive and iterative Web-based technologies for health information provision and propose a four-phase framework for the development of Web-based information tools. The proposed framework draws on our experience of constructing a Web-based information tool for hematological cancer patients and their families. The framework is based on principles for the development and evaluation of complex interventions and draws on the Agile methodology of software programming that emphasizes collaboration and iteration throughout the development process. The DoTTI framework provides a model for a comprehensive and iterative approach to the development of Web-based informational tools for patients. The process involves 4 phases of development: (1) Design and development, (2) Testing early iterations, (3) Testing for effectiveness, and (4) Integration and implementation. At each step, stakeholders (including researchers, clinicians, consumers, and programmers) are engaged in consultations to review progress, provide feedback on versions of the Web-based tool, and based on feedback, determine the appropriate next steps in development. This 4-phase framework is evidence-informed and consumer-centered and could be applied widely to develop Web-based programs for a diverse range of diseases.