The Context and Process for Performance Evaluations: Necessary Preconditions for the Use of Performance Evaluations as a Measure of Performance--A Critique of Perry

ERIC Educational Resources Information Center

McCarthy, Mary L.

2006-01-01

This article challenges Perry's research using performance evaluations to determine whether the educational background of child welfare workers is predictive of performance. Institutional theory, an understanding of street-level bureaucracies, and evaluations of field education performance measures are offered as necessary frameworks for Perry's…

Performance in Physiology Evaluation: Possible Improvement by Active Learning Strategies

ERIC Educational Resources Information Center

Montrezor, Luís H.

2016-01-01

The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages…

Analytically Quantifying Gains in the Test and Evaluation Process through Capabilities-Based Analysis

DTIC Science & Technology

2011-09-01

Evaluation Process through Capabilities-Based Analysis 5. FUNDING NUMBERS 6. AUTHOR(S) Eric J. Lednicky 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING /MONITORING AGENCY NAME(S...14 C. MEASURES OF EFFECTIVENESS / MEASURES OF PERFORMANCE

Model performance evaluation (validation and calibration) in model-based studies of therapeutic interventions for cardiovascular diseases : a review and suggested reporting framework.

PubMed

Haji Ali Afzali, Hossein; Gray, Jodi; Karnon, Jonathan

2013-04-01

Decision analytic models play an increasingly important role in the economic evaluation of health technologies. Given uncertainties around the assumptions used to develop such models, several guidelines have been published to identify and assess 'best practice' in the model development process, including general modelling approach (e.g., time horizon), model structure, input data and model performance evaluation. This paper focuses on model performance evaluation. In the absence of a sufficient level of detail around model performance evaluation, concerns regarding the accuracy of model outputs, and hence the credibility of such models, are frequently raised. Following presentation of its components, a review of the application and reporting of model performance evaluation is presented. Taking cardiovascular disease as an illustrative example, the review investigates the use of face validity, internal validity, external validity, and cross model validity. As a part of the performance evaluation process, model calibration is also discussed and its use in applied studies investigated. The review found that the application and reporting of model performance evaluation across 81 studies of treatment for cardiovascular disease was variable. Cross-model validation was reported in 55 % of the reviewed studies, though the level of detail provided varied considerably. We found that very few studies documented other types of validity, and only 6 % of the reviewed articles reported a calibration process. Considering the above findings, we propose a comprehensive model performance evaluation framework (checklist), informed by a review of best-practice guidelines. This framework provides a basis for more accurate and consistent documentation of model performance evaluation. This will improve the peer review process and the comparability of modelling studies. Recognising the fundamental role of decision analytic models in informing public funding decisions, the proposed framework should usefully inform guidelines for preparing submissions to reimbursement bodies.

A Java-based fMRI processing pipeline evaluation system for assessment of univariate general linear model and multivariate canonical variate analysis-based pipelines.

PubMed

Zhang, Jing; Liang, Lichen; Anderson, Jon R; Gatewood, Lael; Rottenberg, David A; Strother, Stephen C

2008-01-01

As functional magnetic resonance imaging (fMRI) becomes widely used, the demands for evaluation of fMRI processing pipelines and validation of fMRI analysis results is increasing rapidly. The current NPAIRS package, an IDL-based fMRI processing pipeline evaluation framework, lacks system interoperability and the ability to evaluate general linear model (GLM)-based pipelines using prediction metrics. Thus, it can not fully evaluate fMRI analytical software modules such as FSL.FEAT and NPAIRS.GLM. In order to overcome these limitations, a Java-based fMRI processing pipeline evaluation system was developed. It integrated YALE (a machine learning environment) into Fiswidgets (a fMRI software environment) to obtain system interoperability and applied an algorithm to measure GLM prediction accuracy. The results demonstrated that the system can evaluate fMRI processing pipelines with univariate GLM and multivariate canonical variates analysis (CVA)-based models on real fMRI data based on prediction accuracy (classification accuracy) and statistical parametric image (SPI) reproducibility. In addition, a preliminary study was performed where four fMRI processing pipelines with GLM and CVA modules such as FSL.FEAT and NPAIRS.CVA were evaluated with the system. The results indicated that (1) the system can compare different fMRI processing pipelines with heterogeneous models (NPAIRS.GLM, NPAIRS.CVA and FSL.FEAT) and rank their performance by automatic performance scoring, and (2) the rank of pipeline performance is highly dependent on the preprocessing operations. These results suggest that the system will be of value for the comparison, validation, standardization and optimization of functional neuroimaging software packages and fMRI processing pipelines.

The Viewpoints of Students and Evaluation Experts About Performance Processes of Faculty Member Evaluation at Mazandaran University of Medical Sciences, 2014

PubMed Central

Ghahrani, Nassim; Balaghafari, Azita; Aligolbandi, Kobra; Vahedi, Mohammad; Siamian, Hasan

2015-01-01

Background and purpose: One of the most common ways used in most of the countries and Iran to determine the status of teacher training is the evaluation by students. The most common method of evaluation is the survey questionnaire, the content of a number of questions about educational activities provided to the students. The researchers plan to evaluate the students’ and experts’ performances at Mazandaran University of Medical Sciences on the process of evaluating the performance of teachers, they examined in 2014. Materials and methods: This study surveys the students and experts in the evaluation of faculty members’ performance process. The study subjects were 3904 students and 37 evaluation expert of Mazandaran University of Medical Sciences. Using Cochran sampling formula of 350 students through proportional stratified random sampling were selected. The experts’ viewpoint, method was used. Data collection tools consisted of 14 questions with answers Yes, or, I don’t know. Descriptive Statistical analysis of the data and chi-square test was performed. Results: From total of 350 students, 346 and the entire 37 evaluations expert participated in this study. Most of the students, 80 (23.12%) and the largest number of experts, 8 (21.62%) were from Sari Allied Medical Sciences Faculty. Most of the demographic information about gender were, 255 female students (74.56%) and 29 female experts (78.37%). In most age groups of students, 188 (55.62 percent) were in the category of 18 to 20 years, and the experts, 19 (51.35%) were in the category of 22 and 31 years. Most students, 232 of them (70.95%) were in semester 2 and 4. Most experts, 20 (54.05 percent) were under 10 years of work experience. The comparison between the views of students and experts in the evaluation process between the schools of Mazandaran University of Medical Sciences, Sari School of Nursing and Midwifery, there was difference between the opinions of experts and students (p-value=0.01. It showed 86.7% student and 33.3% of experts is satisfied with the evaluation process. Conclusion: on comparison of students and experts viewpoints on the implementation of the evaluation process, it is noteworthy that among students of different opinions on how the evaluation process. It worth to mention that there is insignificant difference between their viewpoints and majority of students and evaluation experts with the evaluation the process. In addition, the experts evaluated at different schools, most of them are satisfied the process. PMID:26236169

The Viewpoints of Students and Evaluation Experts About Performance Processes of Faculty Member Evaluation at Mazandaran University of Medical Sciences, 2014.

PubMed

Ghahrani, Nassim; Balaghafari, Azita; Aligolbandi, Kobra; Vahedi, Mohammad; Siamian, Hasan

2015-06-01

One of the most common ways used in most of the countries and Iran to determine the status of teacher training is the evaluation by students. The most common method of evaluation is the survey questionnaire, the content of a number of questions about educational activities provided to the students. The researchers plan to evaluate the students' and experts' performances at Mazandaran University of Medical Sciences on the process of evaluating the performance of teachers, they examined in 2014. This study surveys the students and experts in the evaluation of faculty members' performance process. The study subjects were 3904 students and 37 evaluation expert of Mazandaran University of Medical Sciences. Using Cochran sampling formula of 350 students through proportional stratified random sampling were selected. The experts' viewpoint, method was used. Data collection tools consisted of 14 questions with answers Yes, or, I don't know. Descriptive Statistical analysis of the data and chi-square test was performed. From total of 350 students, 346 and the entire 37 evaluations expert participated in this study. Most of the students, 80 (23.12%) and the largest number of experts, 8 (21.62%) were from Sari Allied Medical Sciences Faculty. Most of the demographic information about gender were, 255 female students (74.56%) and 29 female experts (78.37%). In most age groups of students, 188 (55.62 percent) were in the category of 18 to 20 years, and the experts, 19 (51.35%) were in the category of 22 and 31 years. Most students, 232 of them (70.95%) were in semester 2 and 4. Most experts, 20 (54.05 percent) were under 10 years of work experience. The comparison between the views of students and experts in the evaluation process between the schools of Mazandaran University of Medical Sciences, Sari School of Nursing and Midwifery, there was difference between the opinions of experts and students (p-value=0.01. It showed 86.7% student and 33.3% of experts is satisfied with the evaluation process. on comparison of students and experts viewpoints on the implementation of the evaluation process, it is noteworthy that among students of different opinions on how the evaluation process. It worth to mention that there is insignificant difference between their viewpoints and majority of students and evaluation experts with the evaluation the process. In addition, the experts evaluated at different schools, most of them are satisfied the process.

Physician performance feedback in a Canadian academic center.

PubMed

Garvin, Dennis; Worthington, James; McGuire, Shaun; Burgetz, Stephanie; Forster, Alan J; Patey, Andrea; Gerin-Lajoie, Caroline; Turnbull, Jeffrey; Roth, Virginia

2017-10-02

Purpose This paper aims at the implementation and early evaluation of a comprehensive, formative annual physician performance feedback process in a large academic health-care organization. Design/methodology/approach A mixed methods approach was used to introduce a formative feedback process to provide physicians with comprehensive feedback on performance and to support professional development. This initiative responded to organization-wide engagement surveys through which physicians identified effective performance feedback as a priority. In 2013, physicians primarily affiliated with the organization participated in a performance feedback process, and physician satisfaction and participant perceptions were explored through participant survey responses and physician leader focus groups. Training was required for physician leaders prior to conducting performance feedback discussions. Findings This process was completed by 98 per cent of eligible physicians, and 30 per cent completed an evaluation survey. While physicians endorsed the concept of a formative feedback process, process improvement opportunities were identified. Qualitative analysis revealed the following process improvement themes: simplify the tool, ensure leaders follow process, eliminate redundancies in data collection (through academic or licensing requirements) and provide objective quality metrics. Following physician leader training on performance feedback, 98 per cent of leaders who completed an evaluation questionnaire agreed or strongly agreed that the performance feedback process was useful and that training objectives were met. Originality/value This paper introduces a physician performance feedback model, leadership training approach and first-year implementation outcomes. The results of this study will be useful to health administrators and physician leaders interested in implementing physician performance feedback or improving physician engagement.

Evaluation of Process Performance for Sustainable Hard Machining

NASA Astrophysics Data System (ADS)

Rotella, Giovanna; Umbrello, Domenico; , Oscar W. Dillon, Jr.; Jawahir, I. S.

This paper aims to evaluate the sustainability performance of machining operation of through-hardening steel, AISI 52100, taking into account the impact of the material removal process in its various aspects. Experiments were performed for dry and cryogenic cutting conditions using chamfered cubic boron nitride (CBN) tool inserts at varying cutting conditions (cutting speed and feed rate). Cutting forces, mechanical power, tool wear, white layer thickness, surface roughness and residual stresses were investigated in order to evaluate the effects of extreme in-process cooling on the machined surface. The results indicate that cryogenic cooling has the potential to be used for surface integrity enhancement for improved product life and more sustainable functional performance.

Dribble Files: Methodologies to Evaluate Learning and Performance in Complex Environments

ERIC Educational Resources Information Center

Schrader, P. G.; Lawless, Kimberly A.

2007-01-01

Research in the area of technology learning environments is tremendously complex. Tasks performed in these contexts are highly cognitive and mostly invisible to the observer. The nature of performance in these contexts is explained not only by the outcome but also by the process. However, evaluating the learning process with respect to tasks…

COGNIS TERRAMET® LEAD EXTRACTION PROCESS; INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

This report documents an evaluation of lead removal from sands and fines fractions of contaminated soils by the COGNIS TERRAMET® lead extraction process (COGNIS process). The evaluation was performed under the U.S. Environmental Protection Agency's Superfund Innovative Technolog...

Screening programme to select a resin for Gravity Probe-B composites

NASA Technical Reports Server (NTRS)

Will, E. T.

1992-01-01

The Gravity Probe-B (GP-B) program undertook a screening program to select a possible replacement resin for the E-787 resin currently used in composite neck tubes and support struts. The goal was to find a resin with good cryogenic and structural properties, low-helium permeation and an easily repeatable fabrication process. Cycom 92, SCI REZ 081 and RS-3 were selected for comparison with E-787. Identical composite tubes made from each resin and gamma-alumina fiber (85 percent Al2O3, 15 percent SiO2) were evaluated for cryogenic and structural performance and for processability. Cryogenic performance was evaluated by measuring low-temperature permeation and leaks to determine cryogenic strain behavior. Structural performance was evaluated by comparing the resin-dominated shear strength of the composites. Processability was evaluated from fabrication comments and GP-B's own experience. SCI REZ 081 was selected as the best overall resin with superior strength and cryogenic performance and consistent processability.

Advanced Video Analysis Needs for Human Performance Evaluation

NASA Technical Reports Server (NTRS)

Campbell, Paul D.

1994-01-01

Evaluators of human task performance in space missions make use of video as a primary source of data. Extraction of relevant human performance information from video is often a labor-intensive process requiring a large amount of time on the part of the evaluator. Based on the experiences of several human performance evaluators, needs were defined for advanced tools which could aid in the analysis of video data from space missions. Such tools should increase the efficiency with which useful information is retrieved from large quantities of raw video. They should also provide the evaluator with new analytical functions which are not present in currently used methods. Video analysis tools based on the needs defined by this study would also have uses in U.S. industry and education. Evaluation of human performance from video data can be a valuable technique in many industrial and institutional settings where humans are involved in operational systems and processes.

Statistical Process Control: A Quality Tool for a Venous Thromboembolic Disease Registry.

PubMed

Posadas-Martinez, Maria Lourdes; Rojas, Liliana Paloma; Vazquez, Fernando Javier; De Quiros, Fernan Bernaldo; Waisman, Gabriel Dario; Giunta, Diego Hernan

2016-01-01

We aim to describe Statistical Control Process as a quality tool for the Institutional Registry of Venous Thromboembolic Disease (IRTD), a registry developed in a community-care tertiary hospital in Buenos Aires, Argentina. The IRTD is a prospective cohort. The process of data acquisition began with the creation of a computerized alert generated whenever physicians requested imaging or laboratory study to diagnose venous thromboembolism, which defined eligible patients. The process then followed a structured methodology for patient's inclusion, evaluation, and posterior data entry. To control this process, process performance indicators were designed to be measured monthly. These included the number of eligible patients, the number of included patients, median time to patient's evaluation, and percentage of patients lost to evaluation. Control charts were graphed for each indicator. The registry was evaluated in 93 months, where 25,757 patients were reported and 6,798 patients met inclusion criteria. The median time to evaluation was 20 hours (SD, 12) and 7.7% of the total was lost to evaluation. Each indicator presented trends over time, caused by structural changes and improvement cycles, and therefore the central limit suffered inflexions. Statistical process control through process performance indicators allowed us to control the performance of the registry over time to detect systematic problems. We postulate that this approach could be reproduced for other clinical registries.

A performance evaluation model for the Stock Point Logistics Integrated Communication Environment (SPLICE)

NASA Astrophysics Data System (ADS)

Schmidt, J. B.

1985-09-01

This thesis investigates ways of improving the real-time performance of the Stockpoint Logistics Integrated Communication Environment (SPLICE). Performance evaluation through continuous monitoring activities and performance studies are the principle vehicles discussed. The method for implementing this performance evaluation process is the measurement of predefined performance indexes. Performance indexes for SPLICE are offered that would measure these areas. Existing SPLICE capability to carry out performance evaluation is explored, and recommendations are made to enhance that capability.

Performance and evaluation of real-time multicomputer control systems

NASA Technical Reports Server (NTRS)

Shin, K. G.

1983-01-01

New performance measures, detailed examples, modeling of error detection process, performance evaluation of rollback recovery methods, experiments on FTMP, and optimal size of an NMR cluster are discussed.

A treatment program for individuals with deficient evaluative processing and consequent impaired social and risk judgement.

PubMed

Park, Norman W; Conrod, Brian; Hussain, Zahra; Murphy, Kelly J; Rewilak, Dmytro; Black, Sandra E

2003-01-01

The current study evaluated the effectiveness of a rehabilitation program developed to assist individuals such as AM who have impaired social and risk judgement. AM's difficulties developed after a severe traumatic brain injury that resulted in bilateral frontal and temporal lobe damage including damage to the amygdala. Previous work (Park et al., 2001) established that AM had impaired automatic processing of negative, but not positive evaluative information, and relatively spared processing of both types of evaluative information when using controlled or strategic processing. In the Strategic Evaluation of Alternatives (SEA) treatment program, AM was trained to compensate for his impairments by explicitly retrieving positive and negative attributes associated with potential actions prior to performing them. The SEA treatment focused specifically on improving AM's ability to obtain financial compensation for his work-related activities. Results showed improved performance on work-related activities and evidence of generalization. Analyses suggested that the process underlying improved performance was compensatory rather than restorative in nature. We discuss the implications of these results for the development of rehabilitation treatment for patients with impaired social and risk judgement.

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography.

PubMed

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2008-06-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance.

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography

PubMed Central

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2014-01-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance. PMID:24932051

Evaluation of anti-sticking layers performances for 200mm wafer scale Smart NILTM process through surface and defectivity characterizations

NASA Astrophysics Data System (ADS)

Delachat, F.; Phillipe, J.-C.; Larrey, V.; Fournel, F.; Bos, S.; Teyssèdre, H.; Chevalier, Xavier; Nicolet, Célia; Navarro, Christophe; Cayrefourcq, Ian

2018-03-01

In this work, an evaluation of various ASL processes for 200 mm wafer scale in the HERCULES® NIL equipment platform available at the CEA-Leti through the INSPIRE program is reported. The surface and adherence energies were correlated to the AFM and defectivity results in order to select the most promising ASL process for high resolution etch mask applications. The ASL performances of the selected process were evaluated by multiple working stamp fabrication using unpatterned and patterned masters though defectivity monitoring on optical based-inspection tools. Optical and SEM defect reviews were systematically performed. Multiple working stamps fabrication without degradation of the master defectivity was witnessed. This evaluation enabled to benchmark several ASL solutions based on the grafted technology develop by ARKEMA in order to reduce and optimize the soft stamp defectivity prior to its replication and therefore considerably reduce the final imprint defectivity for the Smart NIL process.

Performance Evaluation Process.

ERIC Educational Resources Information Center

1998

This document contains four papers from a symposium on the performance evaluation process and human resource development (HRD). "Assessing the Effectiveness of OJT (On the Job Training): A Case Study Approach" (Julie Furst-Bowe, Debra Gates) is a case study of the effectiveness of OJT in one of a high-tech manufacturing company's product…

Image processing system performance prediction and product quality evaluation

NASA Technical Reports Server (NTRS)

Stein, E. K.; Hammill, H. B. (Principal Investigator)

1976-01-01

The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

HANDBOOK ON ADVANCED PHOTOCHEMICAL OXIDATION ...

EPA Pesticide Factsheets

This handbook summarizes commercial-scale system performance and cost data for advanced photochemical oxidation (APO) treatment of contaminated water, air, and solids. Similar information from pilot- and bench-scale evaluations of APO processes is also included to supplement the commercial-scale data. Performance and cost data is summarized for various APO processes, including vacuum ultraviolet (VUV) photolysis, ultraviolet (UV)/oxidation, photo-Fenton, and dye- or semiconductor-sensitized APO processes. This handbook is intended to assist engineering practitioners in evaluating the applicability of APO processes and in selecting one or more such processes for site-specific evaluation.APO has been shown to be effective in treating contaminated water and air. Regarding contaminated water treatment, UV/oxidation has been evaluated for the most contaminants, while VUV photolysis has been evaluated for the fewest. Regarding contaminated air treatment, the sensitized APO processes have been evaluated for the most contaminants, while VUV photolysis has been evaluated for the fewest.APO processes for treating contaminated solids generally involve treatment of contaminated slurry or leachate generated using an extraction process such as soil washing. APO has been shown to be effective in treating contaminated solids, primarily at the bench-scale level. Information

Systematic Evaluation of Professional Performance: Legally Supported Procedure and Process.

ERIC Educational Resources Information Center

Kerl, Stella Beatriz; Garcia, John L.; McCullough, C. Sue; Maxwell, Melissa Elaine

2002-01-01

Legal challenges to counseling students' dismissal that are based on interpersonal or clinical incompetence require sound systematic academic evaluation and adherence to procedural and substantive due process. Presents an examination of professional competency from counselor education and legal perspectives, an evaluation procedure and process,…

Image Navigation and Registration Performance Assessment Evaluation Tools for GOES-R ABI and GLM

NASA Technical Reports Server (NTRS)

Houchin, Scott; Porter, Brian; Graybill, Justin; Slingerland, Philip

2017-01-01

The GOES-R Flight Project has developed an Image Navigation and Registration (INR) Performance Assessment Tool Set (IPATS) for measuring Advanced Baseline Imager (ABI) and Geostationary Lightning Mapper (GLM) INR performance metrics in the post-launch period for performance evaluation and long term monitoring. IPATS utilizes a modular algorithmic design to allow user selection of data processing sequences optimized for generation of each INR metric. This novel modular approach minimizes duplication of common processing elements, thereby maximizing code efficiency and speed. Fast processing is essential given the large number of sub-image registrations required to generate INR metrics for the many images produced over a 24 hour evaluation period. This paper describes the software design and implementation of IPATS and provides preliminary test results.

Implementation of Insight Responsibilities in Process Engineering

NASA Technical Reports Server (NTRS)

Osborne, Deborah M.

1997-01-01

This report describes an approach for evaluating flight readiness (COFR) and contractor performance evaluation (award fee) as part of the insight role of NASA Process Engineering at Kennedy Space Center. Several evaluation methods are presented, including systems engineering evaluations and use of systems performance data. The transition from an oversight function to the insight function is described. The types of analytical tools appropriate for achieving the flight readiness and contractor performance evaluation goals are described and examples are provided. Special emphasis is placed upon short and small run statistical quality control techniques. Training requirements for system engineers are delineated. The approach described herein would be equally appropriate in other directorates at Kennedy Space Center.

Physical Evaluation of Cleaning Performance: We Are Only Fooling Ourselves

NASA Technical Reports Server (NTRS)

Pratz, Earl; McCool, A. (Technical Monitor)

2000-01-01

Surface cleaning processes are normally evaluated using visual physical properties such as discolorations, streaking, staining and water-break-free conditions. There is an assumption that these physical methods will evaluate all surfaces all the time for all subsequent operations. We have found that these physical methods are lacking in sensitivity and selectivity with regard to surface residues and subsequent process performance. We will report several conditions where evaluations using visual physical properties are lacking. We will identify possible alternative methods and future needs for surface evaluations.

Research on the Environmental Performance Evaluation of Electronic Waste Reverse Logistics Enterprise

NASA Astrophysics Data System (ADS)

Yang, Yu-Xiang; Chen, Fei-Yang; Tong, Tong

According to the characteristic of e-waste reverse logistics, environmental performance evaluation system of electronic waste reverse logistics enterprise is proposed. We use fuzzy analytic hierarchy process method to evaluate the system. In addition, this paper analyzes the enterprise X, as an example, to discuss the evaluation method. It's important to point out attributes and indexes which should be strengthen during the process of ewaste reverse logistics and provide guidance suggestions to domestic e-waste reverse logistics enterprises.

Evaluating Process Improvement Courses of Action Through Modeling and Simulation

DTIC Science & Technology

2017-09-16

changes to a process is time consuming and has potential to overlook stochastic effects. By modeling a process as a Numerical Design Structure Matrix...13 Methods to Evaluate Process Performance ................................................................15 The Design Structure...Matrix ......................................................................................16 Numerical Design Structure Matrix

ARSENIC REMOVAL FROM DRINKING WATER BY PROCESS MODIFICATION TO COAGULATION/FILTRATION. USEPA DEMONSTRATION PROJECT AT LIDGERWOOD, ND. FINAL PERFORMANCE EVALUATION REPORT

EPA Science Inventory

This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at the Lidgerwood, North Dakota site. The objectives of the project were to evaluate: (1) the effectiveness of process modifications to an e...

Gallium-arsenide process evaluation based on a RISC microprocessor example

NASA Astrophysics Data System (ADS)

Brown, Richard B.; Upton, Michael; Chandna, Ajay; Huff, Thomas R.; Mudge, Trevor N.; Oettel, Richard E.

1993-10-01

This work evaluates the features of a gallium-arsenide E/D MESFET process in which a 32-b RISC microprocessor was implemented. The design methodology and architecture of this prototype CPU are described. The performance sensitivity of the microprocessor and other large circuit blocks to different process parameters is analyzed, and recommendations for future process features, circuit approaches, and layout styles are made. These recommendations are reflected in the design of a second microprocessor using a more advanced process that achieves much higher density and performance.

Performance evaluation of the insurance companies based on AHP

NASA Astrophysics Data System (ADS)

Lu, Manhong; Zhu, Kunping

2018-04-01

With the entry of foreign capital, China's insurance industry is under increasing pressure of competition. The performance of a company is the external manifestation of its comprehensive strength. Therefore, the establishment of a scientific evaluation system is of practical significance for the insurance companies. In this paper, based on the financial and non-financial indicators of the companies, the performance evaluation system is constructed by means of the analytic hierarchy process (AHP). In the system, the weights of the indicators which represent the impact on the performance of the companies will be calculated by the process. The evaluation system is beneficial for the companies to realize their own strengths and weaknesses, so as to take steps to enhance the core competitiveness of the companies.

Comparison of pre-processing methods for multiplex bead-based immunoassays.

PubMed

Rausch, Tanja K; Schillert, Arne; Ziegler, Andreas; Lüking, Angelika; Zucht, Hans-Dieter; Schulz-Knappe, Peter

2016-08-11

High throughput protein expression studies can be performed using bead-based protein immunoassays, such as the Luminex® xMAP® technology. Technical variability is inherent to these experiments and may lead to systematic bias and reduced power. To reduce technical variability, data pre-processing is performed. However, no recommendations exist for the pre-processing of Luminex® xMAP® data. We compared 37 different data pre-processing combinations of transformation and normalization methods in 42 samples on 384 analytes obtained from a multiplex immunoassay based on the Luminex® xMAP® technology. We evaluated the performance of each pre-processing approach with 6 different performance criteria. Three performance criteria were plots. All plots were evaluated by 15 independent and blinded readers. Four different combinations of transformation and normalization methods performed well as pre-processing procedure for this bead-based protein immunoassay. The following combinations of transformation and normalization were suitable for pre-processing Luminex® xMAP® data in this study: weighted Box-Cox followed by quantile or robust spline normalization (rsn), asinh transformation followed by loess normalization and Box-Cox followed by rsn.

Proposed Framework for the Evaluation of Standalone Corpora Processing Systems: An Application to Arabic Corpora

PubMed Central

Al-Thubaity, Abdulmohsen; Alqifari, Reem

2014-01-01

Despite the accessibility of numerous online corpora, students and researchers engaged in the fields of Natural Language Processing (NLP), corpus linguistics, and language learning and teaching may encounter situations in which they need to develop their own corpora. Several commercial and free standalone corpora processing systems are available to process such corpora. In this study, we first propose a framework for the evaluation of standalone corpora processing systems and then use it to evaluate seven freely available systems. The proposed framework considers the usability, functionality, and performance of the evaluated systems while taking into consideration their suitability for Arabic corpora. While the results show that most of the evaluated systems exhibited comparable usability scores, the scores for functionality and performance were substantially different with respect to support for the Arabic language and N-grams profile generation. The results of our evaluation will help potential users of the evaluated systems to choose the system that best meets their needs. More importantly, the results will help the developers of the evaluated systems to enhance their systems and developers of new corpora processing systems by providing them with a reference framework. PMID:25610910

Proposed framework for the evaluation of standalone corpora processing systems: an application to Arabic corpora.

PubMed

Al-Thubaity, Abdulmohsen; Al-Khalifa, Hend; Alqifari, Reem; Almazrua, Manal

2014-01-01

Despite the accessibility of numerous online corpora, students and researchers engaged in the fields of Natural Language Processing (NLP), corpus linguistics, and language learning and teaching may encounter situations in which they need to develop their own corpora. Several commercial and free standalone corpora processing systems are available to process such corpora. In this study, we first propose a framework for the evaluation of standalone corpora processing systems and then use it to evaluate seven freely available systems. The proposed framework considers the usability, functionality, and performance of the evaluated systems while taking into consideration their suitability for Arabic corpora. While the results show that most of the evaluated systems exhibited comparable usability scores, the scores for functionality and performance were substantially different with respect to support for the Arabic language and N-grams profile generation. The results of our evaluation will help potential users of the evaluated systems to choose the system that best meets their needs. More importantly, the results will help the developers of the evaluated systems to enhance their systems and developers of new corpora processing systems by providing them with a reference framework.

Central Data Processing System (CDPS) user's manual: Solar heating and cooling program

NASA Technical Reports Server (NTRS)

1976-01-01

The software and data base management system required to assess the performance of solar heating and cooling systems installed at multiple sites is presented. The instrumentation data associated with these systems is collected, processed, and presented in a form which supported continuity of performance evaluation across all applications. The CDPS consisted of three major elements: communication interface computer, central data processing computer, and performance evaluation data base. Users of the performance data base were identified, and procedures for operation, and guidelines for software maintenance were outlined. The manual also defined the output capabilities of the CDPS in support of external users of the system.

Information theoretic analysis of edge detection in visual communication

NASA Astrophysics Data System (ADS)

Jiang, Bo; Rahman, Zia-ur

2010-08-01

Generally, the designs of digital image processing algorithms and image gathering devices remain separate. Consequently, the performance of digital image processing algorithms is evaluated without taking into account the artifacts introduced into the process by the image gathering process. However, experiments show that the image gathering process profoundly impacts the performance of digital image processing and the quality of the resulting images. Huck et al. proposed one definitive theoretic analysis of visual communication channels, where the different parts, such as image gathering, processing, and display, are assessed in an integrated manner using Shannon's information theory. In this paper, we perform an end-to-end information theory based system analysis to assess edge detection methods. We evaluate the performance of the different algorithms as a function of the characteristics of the scene, and the parameters, such as sampling, additive noise etc., that define the image gathering system. The edge detection algorithm is regarded to have high performance only if the information rate from the scene to the edge approaches the maximum possible. This goal can be achieved only by jointly optimizing all processes. People generally use subjective judgment to compare different edge detection methods. There is not a common tool that can be used to evaluate the performance of the different algorithms, and to give people a guide for selecting the best algorithm for a given system or scene. Our information-theoretic assessment becomes this new tool to which allows us to compare the different edge detection operators in a common environment.

IARC monographs: 40 years of evaluating carcinogenic hazards to humans.

PubMed

Pearce, Neil; Blair, Aaron; Vineis, Paolo; Ahrens, Wolfgang; Andersen, Aage; Anto, Josep M; Armstrong, Bruce K; Baccarelli, Andrea A; Beland, Frederick A; Berrington, Amy; Bertazzi, Pier Alberto; Birnbaum, Linda S; Brownson, Ross C; Bucher, John R; Cantor, Kenneth P; Cardis, Elisabeth; Cherrie, John W; Christiani, David C; Cocco, Pierluigi; Coggon, David; Comba, Pietro; Demers, Paul A; Dement, John M; Douwes, Jeroen; Eisen, Ellen A; Engel, Lawrence S; Fenske, Richard A; Fleming, Lora E; Fletcher, Tony; Fontham, Elizabeth; Forastiere, Francesco; Frentzel-Beyme, Rainer; Fritschi, Lin; Gerin, Michel; Goldberg, Marcel; Grandjean, Philippe; Grimsrud, Tom K; Gustavsson, Per; Haines, Andy; Hartge, Patricia; Hansen, Johnni; Hauptmann, Michael; Heederik, Dick; Hemminki, Kari; Hemon, Denis; Hertz-Picciotto, Irva; Hoppin, Jane A; Huff, James; Jarvholm, Bengt; Kang, Daehee; Karagas, Margaret R; Kjaerheim, Kristina; Kjuus, Helge; Kogevinas, Manolis; Kriebel, David; Kristensen, Petter; Kromhout, Hans; Laden, Francine; Lebailly, Pierre; LeMasters, Grace; Lubin, Jay H; Lynch, Charles F; Lynge, Elsebeth; 't Mannetje, Andrea; McMichael, Anthony J; McLaughlin, John R; Marrett, Loraine; Martuzzi, Marco; Merchant, James A; Merler, Enzo; Merletti, Franco; Miller, Anthony; Mirer, Franklin E; Monson, Richard; Nordby, Karl-Cristian; Olshan, Andrew F; Parent, Marie-Elise; Perera, Frederica P; Perry, Melissa J; Pesatori, Angela Cecilia; Pirastu, Roberta; Porta, Miquel; Pukkala, Eero; Rice, Carol; Richardson, David B; Ritter, Leonard; Ritz, Beate; Ronckers, Cecile M; Rushton, Lesley; Rusiecki, Jennifer A; Rusyn, Ivan; Samet, Jonathan M; Sandler, Dale P; de Sanjose, Silvia; Schernhammer, Eva; Costantini, Adele Seniori; Seixas, Noah; Shy, Carl; Siemiatycki, Jack; Silverman, Debra T; Simonato, Lorenzo; Smith, Allan H; Smith, Martyn T; Spinelli, John J; Spitz, Margaret R; Stallones, Lorann; Stayner, Leslie T; Steenland, Kyle; Stenzel, Mark; Stewart, Bernard W; Stewart, Patricia A; Symanski, Elaine; Terracini, Benedetto; Tolbert, Paige E; Vainio, Harri; Vena, John; Vermeulen, Roel; Victora, Cesar G; Ward, Elizabeth M; Weinberg, Clarice R; Weisenburger, Dennis; Wesseling, Catharina; Weiderpass, Elisabete; Zahm, Shelia Hoar

2015-06-01

Recently, the International Agency for Research on Cancer (IARC) Programme for the Evaluation of Carcinogenic Risks to Humans has been criticized for several of its evaluations, and also for the approach used to perform these evaluations. Some critics have claimed that failures of IARC Working Groups to recognize study weaknesses and biases of Working Group members have led to inappropriate classification of a number of agents as carcinogenic to humans. The authors of this Commentary are scientists from various disciplines relevant to the identification and hazard evaluation of human carcinogens. We examined criticisms of the IARC classification process to determine the validity of these concerns. Here, we present the results of that examination, review the history of IARC evaluations, and describe how the IARC evaluations are performed. We concluded that these recent criticisms are unconvincing. The procedures employed by IARC to assemble Working Groups of scientists from the various disciplines and the techniques followed to review the literature and perform hazard assessment of various agents provide a balanced evaluation and an appropriate indication of the weight of the evidence. Some disagreement by individual scientists to some evaluations is not evidence of process failure. The review process has been modified over time and will undoubtedly be altered in the future to improve the process. Any process can in theory be improved, and we would support continued review and improvement of the IARC processes. This does not mean, however, that the current procedures are flawed. The IARC Monographs have made, and continue to make, major contributions to the scientific underpinning for societal actions to improve the public's health.

Integration of Occupational Safety to Contractors` or Subcontractors` Performance Evaluation in Construction Projects

NASA Astrophysics Data System (ADS)

Kozlovská, Mária; Struková, Zuzana

2013-06-01

Several factors should be considered by the owner and general contractor in the process of contractors` and subcontractors` selection and evaluation. The paper reviews the recent models addressed to guide general contractors in subcontractors' selection process and in evaluation of different contractors during the execution of the project. Moreover the paper suggests the impact of different contractors' performance to the overall level of occupational health and safety culture at the sites. It deals with the factors influencing the safety performance of contractors during construction and analyses the methods for assessing the safety performance of construction contractors. The results of contractors' safety performance evaluation could be a useful tool in motivating contractors to achieve better safety outcomes or could have effect on owners` or general contractors' decision making about contractors suitability for future contracting works.

Development of the e-Baby serious game with regard to the evaluation of oxygenation in preterm babies: contributions of the emotional design.

PubMed

Fonseca, Luciana Mara Monti; Dias, Danielle Monteiro Vilela; Góes, Fernanda Dos Santos Nogueira; Seixas, Carlos Alberto; Scochi, Carmen Gracinda Silvan; Martins, José Carlos Amado; Rodrigues, Manuel Alves

2014-09-01

The present study aimed to describe the development process of a serious game that enables users to evaluate the respiratory process in a preterm infant based on an emotional design model. The e-Baby serious game was built to feature the simulated environment of an incubator, in which the user performs a clinical evaluation of the respiratory process in a virtual preterm infant. The user learns about the preterm baby's history, chooses the tools for the clinical evaluation, evaluates the baby, and determines whether his/her evaluation is appropriate. The e-Baby game presents phases that contain respiratory process impairments of higher or lower complexity in the virtual preterm baby. Included links give the user the option of recording the entire evaluation procedure and sharing his/her performance on a social network. e-Baby integrates a Clinical Evaluation of the Preterm Baby course in the Moodle virtual environment. This game, which evaluates the respiratory process in preterm infants, could support a more flexible, attractive, and interactive teaching and learning process that includes simulations with features very similar to neonatal unit realities, thus allowing more appropriate training for clinical oxygenation evaluations in at-risk preterm infants. e-Baby allows advanced user-technology-educational interactions because it requires active participation in the process and is emotionally integrated.

[Auditory processing evaluation in children born preterm].

PubMed

Gallo, Júlia; Dias, Karin Ziliotto; Pereira, Liliane Desgualdo; Azevedo, Marisa Frasson de; Sousa, Elaine Colombo

2011-01-01

To verify the performance of children born preterm on auditory processing evaluation, and to correlate the data with behavioral hearing assessment carried out at 12 months of age, comparing the results to those of auditory processing evaluation of children born full-term. Participants were 30 children with ages between 4 and 7 years, who were divided into two groups: Group 1 (children born preterm), and Group 2 (children born full-term). The auditory processing results of Group 1 were correlated to data obtained from the behavioral auditory evaluation carried out at 12 months of age. The results were compared between groups. Subjects in Group 1 presented at least one risk indicator for hearing loss at birth. In the behavioral auditory assessment carried out at 12 months of age, 38% of the children in Group 1 were at risk for central auditory processing deficits, and 93.75% presented auditory processing deficits on the evaluation. Significant differences were found between the groups for the temporal order test, the PSI test with ipsilateral competitive message, and the speech-in-noise test. The delay in sound localization ability was associated to temporal processing deficits. Children born preterm have worse performance in auditory processing evaluation than children born full-term. Delay in sound localization at 12 months is associated to deficits on the physiological mechanism of temporal processing in the auditory processing evaluation carried out between 4 and 7 years.

Assessing Quality and Evaluating Performance in Higher Education: Worlds Apart or Complementary Views?

ERIC Educational Resources Information Center

Sarrico, Claudia S.; Rosa, Maria J.; Teixeira, Pedro N.; Cardoso, Margarida F.

2010-01-01

This paper reflects on quality assessment and performance evaluation in higher education, namely by analysing the insufficient link between those two aspects. We start by reviewing the current state of the art regarding different processes and mechanisms of quality assessment and performance evaluation and discuss some of the major issues…

Evaluating supplier quality performance using fuzzy analytical hierarchy process

NASA Astrophysics Data System (ADS)

Ahmad, Nazihah; Kasim, Maznah Mat; Rajoo, Shanmugam Sundram Kalimuthu

2014-12-01

Evaluating supplier quality performance is vital in ensuring continuous supply chain improvement, reducing the operational costs and risks towards meeting customer's expectation. This paper aims to illustrate an application of Fuzzy Analytical Hierarchy Process to prioritize the evaluation criteria in a context of automotive manufacturing in Malaysia. Five main criteria were identified which were quality, cost, delivery, customer serviceand technology support. These criteria had been arranged into hierarchical structure and evaluated by an expert. The relative importance of each criteria was determined by using linguistic variables which were represented as triangular fuzzy numbers. The Center of Gravity defuzzification method was used to convert the fuzzy evaluations into their corresponding crisps values. Such fuzzy evaluation can be used as a systematic tool to overcome the uncertainty evaluation of suppliers' performance which usually associated with human being subjective judgments.

Performance Evaluation of Public Non-Profit Hospitals Using a BP Artificial Neural Network: The Case of Hubei Province in China

PubMed Central

Li, Chunhui; Yu, Chuanhua

2013-01-01

To provide a reference for evaluating public non-profit hospitals in the new environment of medical reform, we established a performance evaluation system for public non-profit hospitals. The new “input-output” performance model for public non-profit hospitals is based on four primary indexes (input, process, output and effect) that include 11 sub-indexes and 41 items. The indicator weights were determined using the analytic hierarchy process (AHP) and entropy weight method. The BP neural network was applied to evaluate the performance of 14 level-3 public non-profit hospitals located in Hubei Province. The most stable BP neural network was produced by comparing different numbers of neurons in the hidden layer and using the “Leave-one-out” Cross Validation method. The performance evaluation system we established for public non-profit hospitals could reflect the basic goal of the new medical health system reform in China. Compared with PLSR, the result indicated that the BP neural network could be used effectively for evaluating the performance public non-profit hospitals. PMID:23955238

40 CFR 63.8005 - What requirements apply to my process vessels?

Code of Federal Regulations, 2010 CFR

2010-07-01

... condensers, as defined in § 63.1251, are not considered to be control devices for process vessels. (d... 1 to this subpart, you must conduct the performance test or design evaluation under conditions as specified in § 63.7(e)(1), except that the performance test or design evaluation must be conducted under...

Simplified procedures for correlation of experimentally measured and predicted thrust chamber performance

NASA Technical Reports Server (NTRS)

Powell, W. B.

1973-01-01

Thrust chamber performance is evaluated in terms of an analytical model incorporating all the loss processes that occur in a real rocket motor. The important loss processes in the real thrust chamber were identified, and a methodology and recommended procedure for predicting real thrust chamber vacuum specific impulse were developed. Simplified equations for the calculation of vacuum specific impulse are developed to relate the delivered performance (both vacuum specific impulse and characteristic velocity) to the ideal performance as degraded by the losses corresponding to a specified list of loss processes. These simplified equations enable the various performance loss components, and the corresponding efficiencies, to be quantified separately (except that interaction effects are arbitrarily assigned in the process). The loss and efficiency expressions presented can be used to evaluate experimentally measured thrust chamber performance, to direct development effort into the areas most likely to yield improvements in performance, and as a basis to predict performance of related thrust chamber configurations.

Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald Boring; Roger Lew; Thomas Ulrich

2014-03-01

As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how themore » process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.« less

Data-driven freeway performance evaluation framework for project prioritization and decision making.

DOT National Transportation Integrated Search

2017-01-01

This report describes methods that potentially can be incorporated into the performance monitoring and planning processes for freeway performance evaluation and decision making. Reliability analysis was conducted on the selected I-15 corridor by empl...

Data-driven freeway performance evaluation framework for project prioritization and decision making.

DOT National Transportation Integrated Search

2015-03-01

This report describes methods that potentially can be incorporated into the performance monitoring and planning : processes for freeway performance evaluation and decision making. Reliability analysis is conducted on the selected : I-15 corridor by e...

Evacuation performance evaluation tool.

PubMed

Farra, Sharon; Miller, Elaine T; Gneuhs, Matthew; Timm, Nathan; Li, Gengxin; Simon, Ashley; Brady, Whittney

2016-01-01

Hospitals conduct evacuation exercises to improve performance during emergency events. An essential aspect in this process is the creation of reliable and valid evaluation tools. The objective of this article is to describe the development and implications of a disaster evacuation performance tool that measures one portion of the very complex process of evacuation. Through the application of the Delphi technique and DeVellis's framework, disaster and neonatal experts provided input in developing this performance evaluation tool. Following development, content validity and reliability of this tool were assessed. Large pediatric hospital and medical center in the Midwest. The tool was pilot tested with an administrative, medical, and nursing leadership group and then implemented with a group of 68 healthcare workers during a disaster exercise of a neonatal intensive care unit (NICU). The tool has demonstrated high content validity with a scale validity index of 0.979 and inter-rater reliability G coefficient (0.984, 95% CI: 0.948-0.9952). The Delphi process based on the conceptual framework of DeVellis yielded a psychometrically sound evacuation performance evaluation tool for a NICU.

OPPE, FPPE, QPS, and why the alphabet soup of physician assessment is essential for safer patient care.

PubMed

Loftus, Michael L

Creating a successful quality and patient safety program requires a multifaceted approach that systematically reviews overall systems and processes, but also creates a standardized framework for evaluating individual practitioner performance on a routine basis. There are two required elements of competency assessment that are typically tied to the hospital credentialing process: ongoing professional practice evaluation (OPPE) and focused professional practice evaluation (FPPE). Each of these processes are mandated by the Joint Commission, and form an important cornerstone for ensuring adequate physician performance and knowledge base. Copyright © 2017. Published by Elsevier Inc.

FMEA team performance in health care: A qualitative analysis of team member perceptions.

PubMed

Wetterneck, Tosha B; Hundt, Ann Schoofs; Carayon, Pascale

2009-06-01

: Failure mode and effects analysis (FMEA) is a commonly used prospective risk assessment approach in health care. Failure mode and effects analyses are time consuming and resource intensive, and team performance is crucial for FMEA success. We evaluate FMEA team members' perceptions of FMEA team performance to provide recommendations to improve the FMEA process in health care organizations. : Structured interviews and survey questionnaires were administered to team members of 2 FMEA teams at a Midwest Hospital to evaluate team member perceptions of FMEA team performance and factors influencing team performance. Interview transcripts underwent content analysis, and descriptive statistics were performed on questionnaire results to identify and quantify FMEA team performance. Theme-based nodes were categorized using the input-process-outcome model for team performance. : Twenty-eight interviews and questionnaires were completed by 24 team members. Four persons participated on both teams. There were significant differences between the 2 teams regarding perceptions of team functioning and overall team effectiveness that are explained by difference in team inputs and process (e.g., leadership/facilitation, team objectives, attendance of process owners). : Evaluation of team members' perceptions of team functioning produced useful insights that can be used to model future team functioning. Guidelines for FMEA team success are provided.

Evaluating supplier quality performance using analytical hierarchy process

NASA Astrophysics Data System (ADS)

Kalimuthu Rajoo, Shanmugam Sundram; Kasim, Maznah Mat; Ahmad, Nazihah

2013-09-01

This paper elaborates the importance of evaluating supplier quality performance to an organization. Supplier quality performance evaluation reflects the actual performance of the supplier exhibited at customer's end. It is critical in enabling the organization to determine the area of improvement and thereafter works with supplier to close the gaps. Success of the customer partly depends on supplier's quality performance. Key criteria as quality, cost, delivery, technology support and customer service are categorized as main factors in contributing to supplier's quality performance. 18 suppliers' who were manufacturing automotive application parts evaluated in year 2010 using weight point system. There were few suppliers with common rating which led to common ranking observed by few suppliers'. Analytical Hierarchy Process (AHP), a user friendly decision making tool for complex and multi criteria problems was used to evaluate the supplier's quality performance challenging the weight point system that was used for 18 suppliers'. The consistency ratio was checked for criteria and sub-criteria. Final results of AHP obtained with no overlap ratings, therefore yielded a better decision making methodology as compared to weight point rating system.

Bench-scale performance testing and economic analyses of electrostatic dry coal cleaning. Final report, October 1980-July 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, S.R.

1987-02-01

The report gives results of preliminary performance evaluations and economic analyses of the Advanced Energy Dynamics (AED) electrostatic dry coal-cleaning process. Grab samples of coal-feed-product coals were obtained from 25 operating physical coal-cleaning (PCC) plants. These samples were analyzed for ash, sulfur, and energy content and splits of the original samples of feed run-of-mine coal were provided for bench-scale testing in an electrostatic separation apparatus. The process showed superior sulfur-removal performance at equivalent cost and energy-recovery levels. The ash-removal capability of the process was not evaluated completely: overall, ash-removal results indicated that the process did not perform as well asmore » the PCC plants.« less

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Wolf, M.

1981-01-01

The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.

Performance evaluation of extension education centers in universities based on the balanced scorecard.

PubMed

Wu, Hung-Yi; Lin, Yi-Kuei; Chang, Chi-Hsiang

2011-02-01

This study aims at developing a set of appropriate performance evaluation indices mainly based on balanced scorecard (BSC) for extension education centers in universities by utilizing multiple criteria decision making (MCDM). Through literature reviews and experts who have real practical experiences in extension education, adequate performance evaluation indices have been selected and then utilizing the decision making trial and evaluation laboratory (DEMATEL) and analytic network process (ANP), respectively, further establishes the causality between the four BSC perspectives as well as the relative weights between evaluation indices. According to this previous result, an empirical analysis of the performance evaluation of extension education centers of three universities at Taoyuan County in Taiwan is illustrated by applying VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR). From the analysis results, it indicates that "Learning and growth" is the significant influential factor and it would affect the other three perspectives. In addition, it is discovered that "Internal process" perspective as well as "Financial" perspective play important roles in the performance evaluation of extension education centers. The top three key performance indices are "After-sales service", "Turnover volume", and "Net income". The proposed evaluation model could be considered as a reference for extension education centers in universities to prioritize their improvements on the key performance indices after performing VIKOR analyses. 2010 Elsevier Ltd. All rights reserved.

Influence of signal processing strategy in auditory abilities.

PubMed

Melo, Tatiana Mendes de; Bevilacqua, Maria Cecília; Costa, Orozimbo Alves; Moret, Adriane Lima Mortari

2013-01-01

The signal processing strategy is a parameter that may influence the auditory performance of cochlear implant and is important to optimize this parameter to provide better speech perception, especially in difficult listening situations. To evaluate the individual's auditory performance using two different signal processing strategy. Prospective study with 11 prelingually deafened children with open-set speech recognition. A within-subjects design was used to compare performance with standard HiRes and HiRes 120 in three different moments. During test sessions, subject's performance was evaluated by warble-tone sound-field thresholds, speech perception evaluation, in quiet and in noise. In the silence, children S1, S4, S5, S7 showed better performance with the HiRes 120 strategy and children S2, S9, S11 showed better performance with the HiRes strategy. In the noise was also observed that some children performed better using the HiRes 120 strategy and other with HiRes. Not all children presented the same pattern of response to the different strategies used in this study, which reinforces the need to look at optimizing cochlear implant clinical programming.

Evaluation of security algorithms used for security processing on DICOM images

NASA Astrophysics Data System (ADS)

Chen, Xiaomeng; Shuai, Jie; Zhang, Jianguo; Huang, H. K.

2005-04-01

In this paper, we developed security approach to provide security measures and features in PACS image acquisition and Tele-radiology image transmission. The security processing on medical images was based on public key infrastructure (PKI) and including digital signature and data encryption to achieve the security features of confidentiality, privacy, authenticity, integrity, and non-repudiation. There are many algorithms which can be used in PKI for data encryption and digital signature. In this research, we select several algorithms to perform security processing on different DICOM images in PACS environment, evaluate the security processing performance of these algorithms, and find the relationship between performance with image types, sizes and the implementation methods.

Evaluation of the functional performance and technical quality of an Electronic Documentation System of the Nursing Process.

PubMed

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2015-01-01

To evaluate the functional performance and the technical quality of the Electronic Documentation System of the Nursing Process of the Teaching Hospital of the University of São Paulo. exploratory-descriptive study. The Quality Model of regulatory standard 25010 and the Evaluation Process defined under regulatory standard 25040, both of the International Organization for Standardization/International Electrotechnical Commission. The quality characteristics evaluated were: functional suitability, reliability, usability, performance efficiency, compatibility, security, maintainability and portability. The sample was made up of 37 evaluators. in the evaluation of the specialists in information technology, only the characteristic of usability obtained a rate of positive responses of less than 70%. For the nurse lecturers, all the quality characteristics obtained a rate of positive responses of over 70%. The staff nurses of the medical and surgical clinics with experience in using the system) and staff nurses from other units of the hospital and from other health institutions (without experience in using the system) obtained rates of positive responses of more than 70% referent to the functional suitability, usability, and security. However, performance efficiency, reliability and compatibility all obtained rates below the parameter established. the software achieved rates of positive responses of over 70% for the majority of the quality characteristics evaluated.

Perceptions of the Principal Evaluation Process and Performance Criteria: A Qualitative Study of the Challenge of Principal Evaluation

ERIC Educational Resources Information Center

Faginski-Stark, Erica; Casavant, Christopher; Collins, William; McCandless, Jason; Tencza, Marilyn

2012-01-01

Recent federal and state mandates have tasked school systems to move beyond principal evaluation as a bureaucratic function and to re-imagine it as a critical component to improve principal performance and compel school renewal. This qualitative study investigated the district leaders' and principals' perceptions of the performance evaluation…

Conducting effective performance appraisals.

PubMed

2001-01-01

According to experts, performance appraisals rate just below firing someone as the least favorite thing managers do. Many factors contribute to this view--one is that current systems do a poor job of evaluating performance and in fact often impede both evaluation and performance. When used as part of an ongoing supportive process of goal setting and feedback, performance appraisals can enhance performance and morale. One alternative to traditional employee evaluation methods is full-circle or 360-degree feedback. Contained in this issue are practical suggestions for preparing employees for performance appraisals which, when followed daily, encourage employees to put their best feet forward as part of their regular routine. Also included is a template specific to assessing the performance of clinical laboratory technologists . Additionally, numerous resources are provided to help you refine appraisal systems to fit your needs. Full-circle feedback is proving to be a boon to managers. It relieves them from being the exclusive "heavies" in evaluating performance, integrates appraisal input from several sources, and incorporates increasing employee skills, competencies, and satisfaction, thus improving productivity of people and processes. And aren't integration and continuous improvement what the laboratory is all about?

Unicam Activity Framework (UAF)

ERIC Educational Resources Information Center

Gagliardi, R.; Mauri, M.; Polzonetti, A.

2016-01-01

This presentation illustrates the framework of processing performance of the faculty of the University of Camerino. The evaluation criteria are explained and the technological structure that allows automatic performance assessment available online anywhere and anytime. The designed framework is usually applied to the performance evaluation of…

Evaluation of phase separator number in hydrodesulfurization (HDS) unit

NASA Astrophysics Data System (ADS)

Jayanti, A. D.; Indarto, A.

2016-11-01

The removal process of acid gases such as H2S in natural gas processing industry is required in order to meet sales gas specification. Hydrodesulfurization (HDS)is one of the processes in the refinery that is dedicated to reduce sulphur.InHDS unit, phase separator plays important role to remove H2S from hydrocarbons, operated at a certain pressure and temperature. Optimization of the number of separator performed on the system is then evaluated to understand the performance and economics. From the evaluation, it shows that all systems were able to meet the specifications of H2S in the desired product. However, one separator system resulted the highest capital and operational costs. The process of H2S removal with two separator systems showed the best performance in terms of both energy efficiency with the lowest capital and operating cost. The two separator system is then recommended as a reference in the HDS unit to process the removal of H2S from natural gas.

Toward Meaningful Evaluation of Medical Trainees: The Influence of Participants' Perceptions of the Process

ERIC Educational Resources Information Center

Watling, Christopher J.; Lingard, Lorelei

2012-01-01

An essential goal of evaluation is to foster learning. Across the medical education spectrum, evaluation of clinical performance is dominated by subjective feedback to learners based on observation by expert supervisors. Research in non-medical settings has suggested that participants' perceptions of evaluation processes exert considerable…

Performance indicators for the efficiency analysis of urban drainage systems.

PubMed

Artina, S; Becciu, G; Maglionico, M; Paoletti, A; Sanfilippo, U

2005-01-01

Performance indicators implemented in a decision support system (DSS) for the technical, managerial and economic evaluation of urban drainage systems (UDS), called MOMA FD, are presented. Several kinds of information are collected and processed by MOMA FD to evaluate both present situation and future scenarios of development and enhancement. Particular interest is focused on the evaluation of the environmental impact, which is considered a very relevant factor in the decision making process to identify the priorities for UDS improvements.

National Evaluation of Bologna Implementation in Finland: Procedures and Outcomes

ERIC Educational Resources Information Center

Ahola, Sakari

2012-01-01

Finland has performed, as one of the first Bologna countries, a national evaluation of the outcomes of the implementation of the Bologna process. The evaluation was organized by the Finnish Higher Education Evaluation Council and performed by an independent expert group during 2010. In general, the reform was conceived as a significant development…

Face-induced expectancies influence neural mechanisms of performance monitoring.

PubMed

Osinsky, Roman; Seeger, Jennifer; Mussel, Patrick; Hewig, Johannes

2016-04-01

In many daily situations, the consequences of our actions are predicted by cues that are often social in nature. For instance, seeing the face of an evaluator (e.g., a supervisor at work) may activate certain evaluative expectancies, depending on the history of prior encounters with that particular person. We investigated how such face-induced expectancies influence neurocognitive functions of performance monitoring. We recorded an electroencephalogram while participants completed a time-estimation task, during which they received performance feedback from a strict and a lenient evaluator. During each trial, participants first saw the evaluator's face before performing the task and, finally, receiving feedback. Therefore, faces could be used as predictive cues for the upcoming evaluation. We analyzed electrocortical signatures of performance monitoring at the stages of cue processing, task performance, and feedback reception. Our results indicate that, at the cue stage, seeing the strict evaluator's face results in an anticipatory preparation of fronto-medial monitoring mechanisms, as reflected by a sustained negative-going amplitude shift (i.e., the contingent negative variation). At the performance stage, face-induced expectancies of a strict evaluation rule led to increases of early performance monitoring signals (i.e., frontal-midline theta power). At the final stage of feedback reception, violations of outcome expectancies differentially affected the feedback-related negativity and frontal-midline theta power, pointing to a functional dissociation between these signatures. Altogether, our results indicate that evaluative expectancies induced by face-cues lead to adjustments of internal performance monitoring mechanisms at various stages of task processing.

Evaluation of feedback interventions for improving the quality assurance of cancer screening in Japan: study design and report of the baseline survey.

PubMed

Machii, Ryoko; Saika, Kumiko; Higashi, Takahiro; Aoki, Ayako; Hamashima, Chisato; Saito, Hiroshi

2012-02-01

The importance of quality assurance in cancer screening has recently gained increasing attention in Japan. To evaluate and improve quality, checklists and process indicators have been developed. To explore effective methods of enhancing quality in cancer screening, we started a randomized control study of the methods of evaluation and feedback for cancer control from 2009 to 2014. We randomly assigned 1270 municipal governments, equivalent to 71% of all Japanese municipal governments that performed screening programs, into three groups. The high-intensity intervention groups (n = 425) were individually evaluated using both checklist performance and process indicator values, while the low-intensity intervention groups (n= 421) were individually evaluated on the basis of only checklist performance. The control group (n = 424) received only a basic report that included the national average of checklist performance scores. We repeated the survey for each municipality's quality assurance activity performance using checklists and process indicators. In this paper, we report our study design and the result of the baseline survey. The checklist adherence rates were especially low in the checklist elements related to invitation of individuals, detailed monitoring of process indicators such as cancer detection rates according to screening histories and appropriate selection of screening facilities. Screening rate and percentage of examinees who underwent detailed examination tended to be lower for large cities when compared with smaller cities for all cancer sites. The performance of the Japanese cancer screening program in 2009 was identified for the first time.

Performance measurement: integrating quality management and activity-based cost management.

PubMed

McKeon, T

1996-04-01

The development of an activity-based management system provides a framework for developing performance measures integral to quality and cost management. Performance measures that cross operational boundaries and embrace core processes provide a mechanism to evaluate operational results related to strategic intention and internal and external customers. The author discusses this measurement process that allows managers to evaluate where they are and where they want to be, and to set a course of action that closes the gap between the two.

The state of the art in evaluating the performance of department chairs and division heads.

PubMed

Dunning, David G; Durham, Timothy M; Aksu, Mert N; Lange, Brian M

2007-04-01

This study explores the little understood process of evaluating the performance of department chairs/division heads in dental schools. Specifically, this research aimed to elucidate the methods, processes, and outcomes related to the job performance of department chairs/division heads. Forty-three deans and 306 chairs completed surveys with both close-ended and open-ended questions. In addition, ten deans and ten chairs were interviewed. Results indicate that 80 to 90 percent of department chairs are formally evaluated, although as many as 50 percent may lack job descriptions. Recommended best practices for performance appraisal--such as having at least yearly appraisals, holding face-to-face meetings, and setting specific, personal performance objectives/benchmarks for chairs--are being used in most schools. Still, there is much room to improve appraisals by incorporating other recommended practices. Overall high levels of satisfaction were reported by both chairs and deans for the process and outcomes of appraisals. Qualitative data showed some convergence of opinions about appraisals with the notable exception of informal feedback. We explore some implications of these results, especially as they relate to improving performance appraisals.

Validating the ACE Model for Evaluating Student Performance Using a Teaching-Learning Process Based on Computational Modeling Systems

ERIC Educational Resources Information Center

Louzada, Alexandre Neves; Elia, Marcos da Fonseca; Sampaio, Fábio Ferrentini; Vidal, Andre Luiz Pestana

2014-01-01

The aim of this work is to adapt and test, in a Brazilian public school, the ACE model proposed by Borkulo for evaluating student performance as a teaching-learning process based on computational modeling systems. The ACE model is based on different types of reasoning involving three dimensions. In addition to adapting the model and introducing…

A Conceptual Framework for Evaluating Higher Education Institutions

ERIC Educational Resources Information Center

Chinta, Ravi; Kebritchi, Mansureh; Ellias, Janelle

2016-01-01

Purpose: Performance evaluation is a topic that has been researched and practiced extensively in business organizations but has received scant attention in higher education institutions. A review of literature revealed that context, input, process, product (CIPP) model is an appropriate performance evaluation model for higher education…

Evaluation matters: lessons learned on the evaluation of surgical teaching.

PubMed

Woods, Nicole N

2011-01-01

The traditional system of academic promotion and tenure can make it difficult to reward those who excel at surgical teaching. A successful faculty evaluation process can provide the objective measures of teaching performance needed for performance appraisals and promotion decisions. Over the course of two decades, an extensive faculty evaluation process has been developed in the Department of Surgery at the University of Toronto. This paper presents some of the non-psychometric characteristics of that system. Faculty awareness of the evaluation process, the consistency of its application, trainee anonymity and the materiality of the results are described key factors of a faculty evaluation system that meets the assessment needs of individual teachers and raises the profile of teaching in surgical departments. Copyright © 2010 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

System design package for the solar heating and cooling central data processing system

NASA Technical Reports Server (NTRS)

1978-01-01

The central data processing system provides the resources required to assess the performance of solar heating and cooling systems installed at remote sites. These sites consist of residential, commercial, government, and educational types of buildings, and the solar heating and cooling systems can be hot-water, space heating, cooling, and combinations of these. The instrumentation data associated with these systems will vary according to the application and must be collected, processed, and presented in a form which supports continuity of performance evaluation across all applications. Overall software system requirements were established for use in the central integration facility which transforms raw data collected at remote sites into performance evaluation information for assessing the performance of solar heating and cooling systems.

Evaluating Faculty Work: Expectations and Standards of Faculty Performance in Research Universities

ERIC Educational Resources Information Center

Hardre, Patricia; Cox, Michelle

2009-01-01

Expectations and the way they are communicated can influence employees' motivation and performance. Previous research has demonstrated individual effects of workplace climate and individual differences on faculty productivity. The present study focused on the characteristics of institutional performance standards, evaluation processes and…

PERFORMANCE EVALUATION AT A LONG-TERM FOOD PROCESSING LAND TREATMENT SITE

EPA Science Inventory

The objective of this project was to determine the performance of a full scale, operating overland flow land (GEL) treatment system treating nonhazardous waste. Performance was evaluated in terms of treatment of the applied waste and the environmental impact of the system, partic...

Use of social media in health promotion: purposes, key performance indicators, and evaluation metrics.

PubMed

Neiger, Brad L; Thackeray, Rosemary; Van Wagenen, Sarah A; Hanson, Carl L; West, Joshua H; Barnes, Michael D; Fagen, Michael C

2012-03-01

Despite the expanding use of social media, little has been published about its appropriate role in health promotion, and even less has been written about evaluation. The purpose of this article is threefold: (a) outline purposes for social media in health promotion, (b) identify potential key performance indicators associated with these purposes, and (c) propose evaluation metrics for social media related to the key performance indicators. Process evaluation is presented in this article as an overarching evaluation strategy for social media.

Interpersonal relationship modulates brain responses to outcome evaluation when gambling for/against others: an electrophysiological analysis.

PubMed

Leng, Yue; Zhou, Xiaolin

2014-10-01

When individuals play a gambling task and their actions have consequences for observers, how are the brain responses of the performers modulated by their interpersonal relationship with the observers? To address this issue, we examined the event-related potentials responses in performers while they played two gambling games: one during which they tried to earn money for the observers instead of themselves (i.e., Experiment 1) and another gambling game during which they attempted to earn money from the observers (i.e., Experiment 2). In Experiment 1, ERP results showed that when gambling for either the friends or the strangers, the feedback-related negativity (FRN) responses were more negative-going to the losses than to the gains. The FRN effect (loss minus gain) was significantly larger when gambling for the friends than for the strangers. The general P300 response was more positive-going when gambling for the friends than for the strangers. These results suggested that gambling for others enables individuals to assess the outcome from the interests of the other people, consequently, the FRN response may be driven by the evaluative process related to interests of the others. Because one׳s own economic interests were not involved, the performers׳ brain responses during both the early, semi-automatic stage (i.e., the FRN) and the later, controlled stage (i.e., the P300) of outcome evaluation were modulated by the interpersonal relationship between the performers and the observers. In Experiment 2, ERP results revealed that when gambling against others, the FRN response was more negative-going to the losses than to the gains, as well. However, neither the FRN effect nor the general FRN response was modulated by interpersonal relationship. The general P300 response was more positive-going when gambling against the stranger than against the friend. These results suggested that when gambling against others, the performers׳ FRN response may be driven by two evaluative processes: one is related to the interests of their own, and another is related to the interests of the other people; and the former one plays a dominant role. Because of highly self-involvement, only the performers׳ brain responses during the later controlled stage of outcome evaluation were modulated by interpersonal relationship. The present study extended previous research on brain responses to outcome evaluation when decision making actions have consequences for the other people by suggesting that the FRN response in the performer could also be driven by two evaluative processes. In addition, whether the FRN in the performer was modulated by interpersonal relationship depends on which evaluative process plays a dominant role. However, the P300 in the performer could always be modulated by interpersonal relationship. These findings provide evidence on outcome evaluation being composed of an early semi-automatic primitive process and a later controlled cognitive/affective appraisal process. Copyright © 2014 Elsevier Ltd. All rights reserved.

Donabedian's structure-process-outcome quality of care model: Validation in an integrated trauma system.

PubMed

Moore, Lynne; Lavoie, André; Bourgeois, Gilles; Lapointe, Jean

2015-06-01

According to Donabedian's health care quality model, improvements in the structure of care should lead to improvements in clinical processes that should in turn improve patient outcome. This model has been widely adopted by the trauma community but has not yet been validated in a trauma system. The objective of this study was to assess the performance of an integrated trauma system in terms of structure, process, and outcome and evaluate the correlation between quality domains. Quality of care was evaluated for patients treated in a Canadian provincial trauma system (2005-2010; 57 centers, n = 63,971) using quality indicators (QIs) developed and validated previously. Structural performance was measured by transposing on-site accreditation visit reports onto an evaluation grid according to American College of Surgeons criteria. The composite process QI was calculated as the average sum of proportions of conformity to 15 process QIs derived from literature review and expert opinion. Outcome performance was measured using risk-adjusted rates of mortality, complications, and readmission as well as hospital length of stay (LOS). Correlation was assessed with Pearson's correlation coefficients. Statistically significant correlations were observed between structure and process QIs (r = 0.33), and process and outcome QIs (r = -0.33 for readmission, r = -0.27 for LOS). Significant positive correlations were also observed between outcome QIs (r = 0.37 for mortality-readmission; r = 0.39 for mortality-LOS and readmission-LOS; r = 0.45 for mortality-complications; r = 0.34 for readmission-complications; 0.63 for complications-LOS). Significant correlations between quality domains observed in this study suggest that Donabedian's structure-process-outcome model is a valid model for evaluating trauma care. Trauma centers that perform well in terms of structure also tend to perform well in terms of clinical processes, which in turn has a favorable influence on patient outcomes. Prognostic study, level III.

An evaluation of GTAW-P versus GTA welding of alloy 718

NASA Technical Reports Server (NTRS)

Gamwell, W. R.; Kurgan, C.; Malone, T. W.

1991-01-01

Mechanical properties were evaluated to determine statistically whether the pulsed current gas tungsten arc welding (GTAW-P) process produces welds in alloy 718 with room temperature structural performance equivalent to current Space Shuttle Main Engine (SSME) welds manufactured by the constant current GTAW-P process. Evaluations were conducted on two base metal lots, two filler metal lots, two heat input levels, and two welding processes. The material form was 0.125-inch (3.175-mm) alloy 718 sheet. Prior to welding, sheets were treated to either the ST or STA-1 condition. After welding, panels were left as welded or heat treated to the STA-1 condition, and weld beads were left intact or machined flush. Statistical analyses were performed on yield strength, ultimate tensile strength (UTS), and high cycle fatigue (HCF) properties for all the post welded material conditions. Analyses of variance were performed on the data to determine if there were any significant effects on UTS or HCF life due to variations in base metal, filler metal, heat input level, or welding process. Statistical analyses showed that the GTAW-P process does produce welds with room temperature structural performance equivalent to current SSME welds manufactured by the GTAW process, regardless of prior material condition or post welding condition.

Performance evaluation method of electric energy data acquire system based on combination of subjective and objective weights

NASA Astrophysics Data System (ADS)

Gao, Chen; Ding, Zhongan; Deng, Bofa; Yan, Shengteng

2017-10-01

According to the characteristics of electric energy data acquire system (EEDAS), considering the availability of each index data and the connection between the index integrity, establishing the performance evaluation index system of electric energy data acquire system from three aspects as master station system, communication channel, terminal equipment. To determine the comprehensive weight of each index based on triangular fuzzy number analytic hierarchy process with entropy weight method, and both subjective preference and objective attribute are taken into consideration, thus realize the performance comprehensive evaluation more reasonable and reliable. Example analysis shows that, by combination with analytic hierarchy process (AHP) and triangle fuzzy numbers (TFN) to establish comprehensive index evaluation system based on entropy method, the evaluation results not only convenient and practical, but also more objective and accurate.

Performance of a portable chain flail delimber/debarker processing northern hardwoods.

Treesearch

Michael A. Thompson; John A. Sturos

1991-01-01

Evaluates the performance of a Peterson Pacific 4800 chain flail delimber/debarker processing pole-size hardwoods in northern Michigan. Describes the productivity, cost, and delimbing/debarking quality achieved by the flail.

Evaluating Fluid and Crystallized Abilities in the Performance of an Educational Process

ERIC Educational Resources Information Center

Blanch, Angel

2015-01-01

The fluid and crystallized ("Gf-Gc") intelligence theory has been used extensively to evaluate the influence of cognitive abilities on educational outcomes within cross-sectional and longitudinal research designs. This study evaluated the contribution of fluid and crystallized abilities in the performance of a 1-week instructional…

Formal implementation of a performance evaluation model for the face recognition system.

PubMed

Shin, Yong-Nyuo; Kim, Jason; Lee, Yong-Jun; Shin, Woochang; Choi, Jin-Young

2008-01-01

Due to usability features, practical applications, and its lack of intrusiveness, face recognition technology, based on information, derived from individuals' facial features, has been attracting considerable attention recently. Reported recognition rates of commercialized face recognition systems cannot be admitted as official recognition rates, as they are based on assumptions that are beneficial to the specific system and face database. Therefore, performance evaluation methods and tools are necessary to objectively measure the accuracy and performance of any face recognition system. In this paper, we propose and formalize a performance evaluation model for the biometric recognition system, implementing an evaluation tool for face recognition systems based on the proposed model. Furthermore, we performed evaluations objectively by providing guidelines for the design and implementation of a performance evaluation system, formalizing the performance test process.

The Evaluation of Hospital Performance in Iran: A Systematic Review Article

PubMed Central

BAHADORI, Mohammadkarim; IZADI, Ahmad Reza; GHARDASHI, Fatemeh; RAVANGARD, Ramin; HOSSEINI, Seyed Mojtaba

2016-01-01

Background: This research aimed to systematically study and outline the methods of hospital performance evaluation used in Iran. Methods: In this systematic review, all Persian and English-language articles published in the Iranian and non-Iranian scientific journals indexed from Sep 2004 to Sep 2014 were studied. For finding the related articles, the researchers searched the Iranian electronic databases, including SID, IranMedex, IranDoc, Magiran, as well as the non-Iranian electronic databases, including Medline, Embase, Scopus, and Google Scholar. For reviewing the selected articles, a data extraction form, developed by the researchers was used. Results: The entire review process led to the selection of 51 articles. The publication of articles on the hospital performance evaluation in Iran has increased considerably in the recent years. Besides, among these 51 articles, 38 articles (74.51%) had been published in Persian language and 13 articles (25.49%) in English language. Eight models were recognized as evaluation model for Iranian hospitals. Totally, in 15 studies, the data envelopment analysis model had been used to evaluate the hospital performance. Conclusion: Using a combination of model to integrate indicators in the hospital evaluation process is inevitable. Therefore, the Ministry of Health and Medical Education should use a set of indicators such as the balanced scorecard in the process of hospital evaluation and accreditation and encourage the hospital managers to use them. PMID:27516991

The Evaluation of Hospital Performance in Iran: A Systematic Review Article.

PubMed

Bahadori, Mohammadkarim; Izadi, Ahmad Reza; Ghardashi, Fatemeh; Ravangard, Ramin; Hosseini, Seyed Mojtaba

2016-07-01

This research aimed to systematically study and outline the methods of hospital performance evaluation used in Iran. In this systematic review, all Persian and English-language articles published in the Iranian and non-Iranian scientific journals indexed from Sep 2004 to Sep 2014 were studied. For finding the related articles, the researchers searched the Iranian electronic databases, including SID, IranMedex, IranDoc, Magiran, as well as the non-Iranian electronic databases, including Medline, Embase, Scopus, and Google Scholar. For reviewing the selected articles, a data extraction form, developed by the researchers was used. The entire review process led to the selection of 51 articles. The publication of articles on the hospital performance evaluation in Iran has increased considerably in the recent years. Besides, among these 51 articles, 38 articles (74.51%) had been published in Persian language and 13 articles (25.49%) in English language. Eight models were recognized as evaluation model for Iranian hospitals. Totally, in 15 studies, the data envelopment analysis model had been used to evaluate the hospital performance. Using a combination of model to integrate indicators in the hospital evaluation process is inevitable. Therefore, the Ministry of Health and Medical Education should use a set of indicators such as the balanced scorecard in the process of hospital evaluation and accreditation and encourage the hospital managers to use them.

A Framework for the Development of Automatic DFA Method to Minimize the Number of Components and Assembly Reorientations

NASA Astrophysics Data System (ADS)

Alfadhlani; Samadhi, T. M. A. Ari; Ma’ruf, Anas; Setiasyah Toha, Isa

2018-03-01

Assembly is a part of manufacturing processes that must be considered at the product design stage. Design for Assembly (DFA) is a method to evaluate product design in order to make it simpler, easier and quicker to assemble, so that assembly cost is reduced. This article discusses a framework for developing a computer-based DFA method. The method is expected to aid product designer to extract data, evaluate assembly process, and provide recommendation for the product design improvement. These three things are desirable to be performed without interactive process or user intervention, so product design evaluation process could be done automatically. Input for the proposed framework is a 3D solid engineering drawing. Product design evaluation is performed by: minimizing the number of components; generating assembly sequence alternatives; selecting the best assembly sequence based on the minimum number of assembly reorientations; and providing suggestion for design improvement.

Information theoretic analysis of linear shift-invariant edge-detection operators

NASA Astrophysics Data System (ADS)

Jiang, Bo; Rahman, Zia-ur

2012-06-01

Generally, the designs of digital image processing algorithms and image gathering devices remain separate. Consequently, the performance of digital image processing algorithms is evaluated without taking into account the influences by the image gathering process. However, experiments show that the image gathering process has a profound impact on the performance of digital image processing and the quality of the resulting images. Huck et al. proposed one definitive theoretic analysis of visual communication channels, where the different parts, such as image gathering, processing, and display, are assessed in an integrated manner using Shannon's information theory. We perform an end-to-end information theory based system analysis to assess linear shift-invariant edge-detection algorithms. We evaluate the performance of the different algorithms as a function of the characteristics of the scene and the parameters, such as sampling, additive noise etc., that define the image gathering system. The edge-detection algorithm is regarded as having high performance only if the information rate from the scene to the edge image approaches its maximum possible. This goal can be achieved only by jointly optimizing all processes. Our information-theoretic assessment provides a new tool that allows us to compare different linear shift-invariant edge detectors in a common environment.

The performance evaluation model of mining project founded on the weight optimization entropy value method

NASA Astrophysics Data System (ADS)

Mao, Chao; Chen, Shou

2017-01-01

According to the traditional entropy value method still have low evaluation accuracy when evaluating the performance of mining projects, a performance evaluation model of mineral project founded on improved entropy is proposed. First establish a new weight assignment model founded on compatible matrix analysis of analytic hierarchy process (AHP) and entropy value method, when the compatibility matrix analysis to achieve consistency requirements, if it has differences between subjective weights and objective weights, moderately adjust both proportions, then on this basis, the fuzzy evaluation matrix for performance evaluation. The simulation experiments show that, compared with traditional entropy and compatible matrix analysis method, the proposed performance evaluation model of mining project based on improved entropy value method has higher accuracy assessment.

Defining Administrative Tasks, Evaluating Performance, and Developing Skills.

ERIC Educational Resources Information Center

Herman, Janice L.; Herman, Jerry J.

1995-01-01

To ensure high performance, administrators should develop an articulated structure and process systems approach that identifies the critical success factors (CSFs) of performance for each position; appropriate indicators and scales; and a personal-improvement plan based on last year's evaluation. Once CSFs are identified and written into the…

Performance bounds on parallel self-initiating discrete-event

NASA Technical Reports Server (NTRS)

Nicol, David M.

1990-01-01

The use is considered of massively parallel architectures to execute discrete-event simulations of what is termed self-initiating models. A logical process in a self-initiating model schedules its own state re-evaluation times, independently of any other logical process, and sends its new state to other logical processes following the re-evaluation. The interest is in the effects of that communication on synchronization. The performance is considered of various synchronization protocols by deriving upper and lower bounds on optimal performance, upper bounds on Time Warp's performance, and lower bounds on the performance of a new conservative protocol. The analysis of Time Warp includes the overhead costs of state-saving and rollback. The analysis points out sufficient conditions for the conservative protocol to outperform Time Warp. The analysis also quantifies the sensitivity of performance to message fan-out, lookahead ability, and the probability distributions underlying the simulation.

Ongoing Relative Performance Evaluation for a CO2 EOR Asset in a Worldwide Peer Group

NASA Astrophysics Data System (ADS)

Zhao, C. F.; Li, X. S.; Wang, G. H.; Li, L.

2017-10-01

Abstract. Operators of a CO2 EOR asset need to know the relative performance level of their asset against its peers. The ongoing relative performance evaluation method is appropriate for this purpose. We first choose 52 CO2 assets around the world as the peer group, and then define the four ranking levels in terms of CO2consumption ratio. Only the final values of CO2consumption ratio for the group are obtained, and therefore cannot be used for an ongoing evaluation during a CO2 EOR asset’s life circle. Consequently, numerical reservoir simulation is employed to quantify the process values corresponding to the four ranking levels. Type curve plots are generated on the basis of the process values and utilized for the ongoing relative performance evaluation of a CO2 EOR asset in China.

Cognitive processing specificity of anxious apprehension: impact on distress and performance during speech exposure.

PubMed

Philippot, Pierre; Vrielynck, Nathalie; Muller, Valérie

2010-12-01

The present study examined the impact of different modes of processing anxious apprehension on subsequent anxiety and performance in a stressful speech task. Participants were informed that they would have to give a speech on a difficult topic while being videotaped and evaluated on their performance. They were then randomly assigned to one of three conditions. In a specific processing condition, they were encouraged to explore in detail all the specific aspects (thoughts, emotions, sensations) they experienced while anticipating giving the speech; in a general processing condition, they had to focus on the generic aspects that they would typically experience during anxious anticipation; and in a control, no-processing condition, participants were distracted. Results revealed that at the end of the speech, participants in the specific processing condition reported less anxiety than those in the two other conditions. They were also evaluated by judges to have performed better than those in the control condition, who in turn did better than those in the general processing condition. Copyright © 2010. Published by Elsevier Ltd.

Experimental evaluation of the impact of packet capturing tools for web services.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choe, Yung Ryn; Mohapatra, Prasant; Chuah, Chen-Nee

Network measurement is a discipline that provides the techniques to collect data that are fundamental to many branches of computer science. While many capturing tools and comparisons have made available in the literature and elsewhere, the impact of these packet capturing tools on existing processes have not been thoroughly studied. While not a concern for collection methods in which dedicated servers are used, many usage scenarios of packet capturing now requires the packet capturing tool to run concurrently with operational processes. In this work we perform experimental evaluations of the performance impact that packet capturing process have on web-based services;more » in particular, we observe the impact on web servers. We find that packet capturing processes indeed impact the performance of web servers, but on a multi-core system the impact varies depending on whether the packet capturing and web hosting processes are co-located or not. In addition, the architecture and behavior of the web server and process scheduling is coupled with the behavior of the packet capturing process, which in turn also affect the web server's performance.« less

Descriptive and evaluative judgment processes: behavioral and electrophysiological indices of processing symmetry and aesthetics.

PubMed

Jacobsen, Thomas; Höfel, Lea

2003-12-01

Descriptive symmetry and evaluative aesthetic judgment processes were compared using identical stimuli in both judgment tasks. Electrophysiological activity was recorded while participants judged novel formal graphic patterns in a trial-by-trial cuing setting using binary responses (symmetric, not symmetric; beautiful, not beautiful). Judgment analyses of a Phase 1 test and main experiment performance resulted in individual models, as well as group models, of the participants' judgment systems. Symmetry showed a strong positive correlation with beautiful judgments and was the most important cue. Descriptive judgments were performed faster than evaluative judgments. The ERPs revealed a phasic, early frontal negativity for the not-beautiful judgments. A sustained posterior negativity was observed in the symmetric condition. All conditions showed late positive potentials (LPPs). Evaluative judgment LPPs revealed a more pronounced right lateralization. It is argued that the present aesthetic judgments engage a two-stage process consisting of early, anterior frontomedian impression formation after 300 msec and right-hemisphere evaluative categorization around 600 msec after onset of the graphic patterns.

Evaluating the Upset Protrusion Joining (UPJ) Method to Join magnesium Castings to Dissimilar Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Stephen D.

2015-08-19

This presentation discusses advantages and best practices for incorporating magnesium in automotive component applications to achieve substantial mass reduction, as well as some of the key challenges with respect to joining, coating, and galvanic corrosion, before providing an introduction and status update of the U.S. Department of Energy and Department of Defense jointly sponsored Upset Protrusion Joining (UPJ) process development and evaluation project. This update includes sharing performance results of a benchmark evaluation of the self-pierce riveting (SPR) process for joining dissimilar magnesium (Mg) to aluminum (Al) materials in four unique coating configurations before introducing the UPJ concept and comparingmore » performance results of the joints made with the UPJ process to those made with the SPR process.« less

Performance Evaluation of the UT Automated Road Maintenance Machine

DOT National Transportation Integrated Search

1997-10-01

This final report focuses mainly on evaluating the overall performance of The University of Texas' Automated Road Maintenance Machine (ARMM). It was concluded that the introduction of automated methods to the pavement crack-sealing process will impro...

Governing Staff Reductions: The Use and Abuse of Teacher Evaluations.

ERIC Educational Resources Information Center

Phelan, William T.

1983-01-01

Indicates that most principals and teachers interviewed in 16 school districts in Massachusetts agreed that performance evaluations should be part of the reduction in force (RIF) process. Examines performance assessments currently being done in selected districts. (MJL)

Evaluation and verification of epitaxial process sequence for silicon solar-cell production

NASA Technical Reports Server (NTRS)

Redfield, D.

1981-01-01

To achieve the program goals, 28 minimodules were fabricated and tested, using 600 cells made from three-inch-diameter wafers processed by the sequence chosen for this purpose. Of these 600 cells, half were made from epitaxially grown layers on potentially low-cost substrates. The other half were made from commercial semiconductor-grade (SG), single-crystal silicon wafers that served as controls. Cell processing was normally performed on mixed lots containing significant numbers of each of these two types of wafers. After evaluation of the performance of all cells, they were separated by types for incorporation into modules that were to be tested for electrical performance and response to environmental stress. A simplified flow chart displaying this scheme, for quantities representing half of the planned total to be processed, is presented.

Evaluating Mobile Graphics Processing Units (GPUs) for Real-Time Resource Constrained Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meredith, J; Conger, J; Liu, Y

2005-11-11

Modern graphics processing units (GPUs) can provide tremendous performance boosts for some applications beyond what a single CPU can accomplish, and their performance is growing at a rate faster than CPUs as well. Mobile GPUs available for laptops have the small form factor and low power requirements suitable for use in embedded processing. We evaluated several desktop and mobile GPUs and CPUs on traditional and non-traditional graphics tasks, as well as on the most time consuming pieces of a full hyperspectral imaging application. Accuracy remained high despite small differences in arithmetic operations like rounding. Performance improvements are summarized here relativemore » to a desktop Pentium 4 CPU.« less

Respiratory sinus arrhythmia and auditory processing in autism: modifiable deficits of an integrated social engagement system?

PubMed

Porges, Stephen W; Macellaio, Matthew; Stanfill, Shannon D; McCue, Kimberly; Lewis, Gregory F; Harden, Emily R; Handelman, Mika; Denver, John; Bazhenova, Olga V; Heilman, Keri J

2013-06-01

The current study evaluated processes underlying two common symptoms (i.e., state regulation problems and deficits in auditory processing) associated with a diagnosis of autism spectrum disorders. Although these symptoms have been treated in the literature as unrelated, when informed by the Polyvagal Theory, these symptoms may be viewed as the predictable consequences of depressed neural regulation of an integrated social engagement system, in which there is down regulation of neural influences to the heart (i.e., via the vagus) and to the middle ear muscles (i.e., via the facial and trigeminal cranial nerves). Respiratory sinus arrhythmia (RSA) and heart period were monitored to evaluate state regulation during a baseline and two auditory processing tasks (i.e., the SCAN tests for Filtered Words and Competing Words), which were used to evaluate auditory processing performance. Children with a diagnosis of autism spectrum disorders (ASD) were contrasted with aged matched typically developing children. The current study identified three features that distinguished the ASD group from a group of typically developing children: 1) baseline RSA, 2) direction of RSA reactivity, and 3) auditory processing performance. In the ASD group, the pattern of change in RSA during the attention demanding SCAN tests moderated the relation between performance on the Competing Words test and IQ. In addition, in a subset of ASD participants, auditory processing performance improved and RSA increased following an intervention designed to improve auditory processing. Copyright © 2012 Elsevier B.V. All rights reserved.

Evaluating the use of prior information under different pacing conditions on aircraft inspection performance: The use of virtual reality technology

NASA Astrophysics Data System (ADS)

Bowling, Shannon Raye

The aircraft maintenance industry is a complex system consisting of human and machine components, because of this; much emphasis has been placed on improving aircraft-inspection performance. One proven technique for improving inspection performance is the use of training. There are several strategies that have been implemented for training, one of which is feedforward information. The use of prior information (feedforward) is known to positively affect inspection performance. This information can consist of knowledge about defect characteristics (types, severity/criticality, and location) and the probability of occurrence. Although several studies have been conducted that demonstrate the usefulness of feedforward as a training strategy, there are certain research issues that need to be addressed. This study evaluates the effect of feedforward information in a simulated 3-dimensional environment by the use of virtual reality. A controlled study was conducted to evaluate the effectiveness of feedforward information in a simulated aircraft inspection environment. The study was conducted in two phases. The first phase evaluated the difference between general and detailed inspection at different pacing levels. The second phase evaluated the effect of feedforward information pertaining to severity, probability and location. Analyses of the results showed that subjects performing detailed inspection performed significantly better than while performing general inspection. Pacing also had the effect of reducing performance for both general and detailed inspection. The study also found that as the level of feedforward information increases, performance also increases. In addition to evaluating performance measures, the study also evaluated process and subjective measures. It was found that process measures such as number of fixation points, fixation groups, mean fixation duration, and percent area covered were all affected by the treatment levels. Analyses of the subjective measures also found a correlation between the perceived usefulness of feedforward information and the actual effect on performance. The study also examined the potential of virtual reality as a training tool and analyzed the effect different calculational algorithms have on determining various process measures.

Performance Evaluation of Indian Technical Institutions Using PROMETHEE-GAIA Approach

ERIC Educational Resources Information Center

Ranjan, Rajeev; Chakraborty, Shankar

2015-01-01

It has now become an important issue to evaluate the performance of technical institutions to develop better research and enrich the existing teaching processes. The results of such performance appraisal would serve as a reference point for decisions to choose a particular institution, hire manpower, and provide financial support for the…

Phased models for evaluating the performability of computing systems

NASA Technical Reports Server (NTRS)

Wu, L. T.; Meyer, J. F.

1979-01-01

A phase-by-phase modelling technique is introduced to evaluate a fault tolerant system's ability to execute different sets of computational tasks during different phases of the control process. Intraphase processes are allowed to differ from phase to phase. The probabilities of interphase state transitions are specified by interphase transition matrices. Based on constraints imposed on the intraphase and interphase transition probabilities, various iterative solution methods are developed for calculating system performability.

77 FR 75173 - Comprehensive Assessment of the Process for the Review of Device Submissions; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... performing the technical analysis, management assessment, and program evaluation tasks required to address... premarket reviews that meet regulatory review standards. 2. Analysis of elements of the review process... process. This includes analysis of root causes for inefficiencies that may affect review performance and...

Bridging the gap between neurocognitive processing theory and performance validity assessment among the cognitively impaired: a review and methodological approach.

PubMed

Leighton, Angela; Weinborn, Michael; Maybery, Murray

2014-10-01

Bigler (2012) and Larrabee (2012) recently addressed the state of the science surrounding performance validity tests (PVTs) in a dialogue highlighting evidence for the valid and increased use of PVTs, but also for unresolved problems. Specifically, Bigler criticized the lack of guidance from neurocognitive processing theory in the PVT literature. For example, individual PVTs have applied the simultaneous forced-choice methodology using a variety of test characteristics (e.g., word vs. picture stimuli) with known neurocognitive processing implications (e.g., the "picture superiority effect"). However, the influence of such variations on classification accuracy has been inadequately evaluated, particularly among cognitively impaired individuals. The current review places the PVT literature in the context of neurocognitive processing theory, and identifies potential methodological factors to account for the significant variability we identified in classification accuracy across current PVTs. We subsequently evaluated the utility of a well-known cognitive manipulation to provide a Clinical Analogue Methodology (CAM), that is, to alter the PVT performance of healthy individuals to be similar to that of a cognitively impaired group. Initial support was found, suggesting the CAM may be useful alongside other approaches (analogue malingering methodology) for the systematic evaluation of PVTs, particularly the influence of specific neurocognitive processing components on performance.

National Security Technology Incubator Evaluation Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages ofmore » early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.« less

Analytical and Experimental Performance Evaluation of BLE Neighbor Discovery Process Including Non-Idealities of Real Chipsets

PubMed Central

Perez-Diaz de Cerio, David; Hernández, Ángela; Valenzuela, Jose Luis; Valdovinos, Antonio

2017-01-01

The purpose of this paper is to evaluate from a real perspective the performance of Bluetooth Low Energy (BLE) as a technology that enables fast and reliable discovery of a large number of users/devices in a short period of time. The BLE standard specifies a wide range of configurable parameter values that determine the discovery process and need to be set according to the particular application requirements. Many previous works have been addressed to investigate the discovery process through analytical and simulation models, according to the ideal specification of the standard. However, measurements show that additional scanning gaps appear in the scanning process, which reduce the discovery capabilities. These gaps have been identified in all of the analyzed devices and respond to both regular patterns and variable events associated with the decoding process. We have demonstrated that these non-idealities, which are not taken into account in other studies, have a severe impact on the discovery process performance. Extensive performance evaluation for a varying number of devices and feasible parameter combinations has been done by comparing simulations and experimental measurements. This work also includes a simple mathematical model that closely matches both the standard implementation and the different chipset peculiarities for any possible parameter value specified in the standard and for any number of simultaneous advertising devices under scanner coverage. PMID:28273801

Analytical and Experimental Performance Evaluation of BLE Neighbor Discovery Process Including Non-Idealities of Real Chipsets.

PubMed

Perez-Diaz de Cerio, David; Hernández, Ángela; Valenzuela, Jose Luis; Valdovinos, Antonio

2017-03-03

The purpose of this paper is to evaluate from a real perspective the performance of Bluetooth Low Energy (BLE) as a technology that enables fast and reliable discovery of a large number of users/devices in a short period of time. The BLE standard specifies a wide range of configurable parameter values that determine the discovery process and need to be set according to the particular application requirements. Many previous works have been addressed to investigate the discovery process through analytical and simulation models, according to the ideal specification of the standard. However, measurements show that additional scanning gaps appear in the scanning process, which reduce the discovery capabilities. These gaps have been identified in all of the analyzed devices and respond to both regular patterns and variable events associated with the decoding process. We have demonstrated that these non-idealities, which are not taken into account in other studies, have a severe impact on the discovery process performance. Extensive performance evaluation for a varying number of devices and feasible parameter combinations has been done by comparing simulations and experimental measurements. This work also includes a simple mathematical model that closely matches both the standard implementation and the different chipset peculiarities for any possible parameter value specified in the standard and for any number of simultaneous advertising devices under scanner coverage.

Grey Relational Analysis Coupled with Principal Component Analysis for Optimization of Stereolithography Process to Enhance Part Quality

NASA Astrophysics Data System (ADS)

Raju, B. S.; Sekhar, U. Chandra; Drakshayani, D. N.

2017-08-01

The paper investigates optimization of stereolithography process for SL5530 epoxy resin material to enhance part quality. The major characteristics indexed for performance selected to evaluate the processes are tensile strength, Flexural strength, Impact strength and Density analysis and corresponding process parameters are Layer thickness, Orientation and Hatch spacing. In this study, the process is intrinsically with multiple parameters tuning so that grey relational analysis which uses grey relational grade as performance index is specially adopted to determine the optimal combination of process parameters. Moreover, the principal component analysis is applied to evaluate the weighting values corresponding to various performance characteristics so that their relative importance can be properly and objectively desired. The results of confirmation experiments reveal that grey relational analysis coupled with principal component analysis can effectively acquire the optimal combination of process parameters. Hence, this confirm that the proposed approach in this study can be an useful tool to improve the process parameters in stereolithography process, which is very useful information for machine designers as well as RP machine users.

Formulation and process factors influencing product quality and in vitro performance of ophthalmic ointments.

PubMed

Xu, Xiaoming; Al-Ghabeish, Manar; Rahman, Ziyaur; Krishnaiah, Yellela S R; Yerlikaya, Firat; Yang, Yang; Manda, Prashanth; Hunt, Robert L; Khan, Mansoor A

2015-09-30

Owing to its unique anatomical and physiological functions, ocular surface presents special challenges for both design and performance evaluation of the ophthalmic ointment drug products formulated with a variety of bases. The current investigation was carried out to understand and identify the appropriate in vitro methods suitable for quality and performance evaluation of ophthalmic ointment, and to study the effect of formulation and process variables on its critical quality attributes (CQA). The evaluated critical formulation variables include API initial size, drug percentage, and mineral oil percentage while the critical process parameters include mixing rate, temperature, time and cooling rate. The investigated quality and performance attributes include drug assay, content uniformity, API particle size in ointment, rheological characteristics, in vitro drug release and in vitro transcorneal drug permeation. Using design of experiments (DoE) as well as a novel principle component analysis approach, five of the quality and performance attributes (API particle size, storage modulus of ointment, high shear viscosity of ointment, in vitro drug release constant and in vitro transcorneal drug permeation rate constant) were found to be highly influenced by the formulation, in particular the strength of API, and to a lesser degree by processing variables. Correlating the ocular physiology with the physicochemical characteristics of acyclovir ophthalmic ointment suggested that in vitro quality metrics could be a valuable predictor of its in vivo performance. Published by Elsevier B.V.

Enforcement of entailment constraints in distributed service-based business processes.

PubMed

Hummer, Waldemar; Gaubatz, Patrick; Strembeck, Mark; Zdun, Uwe; Dustdar, Schahram

2013-11-01

A distributed business process is executed in a distributed computing environment. The service-oriented architecture (SOA) paradigm is a popular option for the integration of software services and execution of distributed business processes. Entailment constraints, such as mutual exclusion and binding constraints, are important means to control process execution. Mutually exclusive tasks result from the division of powerful rights and responsibilities to prevent fraud and abuse. In contrast, binding constraints define that a subject who performed one task must also perform the corresponding bound task(s). We aim to provide a model-driven approach for the specification and enforcement of task-based entailment constraints in distributed service-based business processes. Based on a generic metamodel, we define a domain-specific language (DSL) that maps the different modeling-level artifacts to the implementation-level. The DSL integrates elements from role-based access control (RBAC) with the tasks that are performed in a business process. Process definitions are annotated using the DSL, and our software platform uses automated model transformations to produce executable WS-BPEL specifications which enforce the entailment constraints. We evaluate the impact of constraint enforcement on runtime performance for five selected service-based processes from existing literature. Our evaluation demonstrates that the approach correctly enforces task-based entailment constraints at runtime. The performance experiments illustrate that the runtime enforcement operates with an overhead that scales well up to the order of several ten thousand logged invocations. Using our DSL annotations, the user-defined process definition remains declarative and clean of security enforcement code. Our approach decouples the concerns of (non-technical) domain experts from technical details of entailment constraint enforcement. The developed framework integrates seamlessly with WS-BPEL and the Web services technology stack. Our prototype implementation shows the feasibility of the approach, and the evaluation points to future work and further performance optimizations.

A nationwide survey of state-mandated evaluation practices for domestic violence agencies.

PubMed

Riger, Stephanie; Staggs, Susan L

2011-01-01

Many agencies serving survivors of domestic violence are required to evaluate their services. Three possible evaluation strategies include: a) process measurement, which typically involves a frequency count of agency activities, such as the number of counseling hours given; b) outcome evaluation, which measures the impact of agency activities on clients, such as increased understanding of the dynamics of abuse; or c) performance measurement, which assesses the extent to which agencies achieve their stated goals. Findings of a telephone survey of state funders of domestic violence agencies in the United States revealed that most states (67%) require only process measurement, while fewer than 10% require performance measurement. Most (69%) funders reported satisfaction with their evaluation strategy and emphasized the need for involvement of all stakeholders, especially grantees, in developing an evaluation.

Results from the VALUE perfect predictor experiment: process-based evaluation

NASA Astrophysics Data System (ADS)

Maraun, Douglas; Soares, Pedro; Hertig, Elke; Brands, Swen; Huth, Radan; Cardoso, Rita; Kotlarski, Sven; Casado, Maria; Pongracz, Rita; Bartholy, Judit

2016-04-01

Until recently, the evaluation of downscaled climate model simulations has typically been limited to surface climatologies, including long term means, spatial variability and extremes. But these aspects are often, at least partly, tuned in regional climate models to match observed climate. The tuning issue is of course particularly relevant for bias corrected regional climate models. In general, a good performance of a model for these aspects in present climate does therefore not imply a good performance in simulating climate change. It is now widely accepted that, to increase our condidence in climate change simulations, it is necessary to evaluate how climate models simulate relevant underlying processes. In other words, it is important to assess whether downscaling does the right for the right reason. Therefore, VALUE has carried out a broad process-based evaluation study based on its perfect predictor experiment simulations: the downscaling methods are driven by ERA-Interim data over the period 1979-2008, reference observations are given by a network of 85 meteorological stations covering all European climates. More than 30 methods participated in the evaluation. In order to compare statistical and dynamical methods, only variables provided by both types of approaches could be considered. This limited the analysis to conditioning local surface variables on variables from driving processes that are simulated by ERA-Interim. We considered the following types of processes: at the continental scale, we evaluated the performance of downscaling methods for positive and negative North Atlantic Oscillation, Atlantic ridge and blocking situations. At synoptic scales, we considered Lamb weather types for selected European regions such as Scandinavia, the United Kingdom, the Iberian Pensinsula or the Alps. At regional scales we considered phenomena such as the Mistral, the Bora or the Iberian coastal jet. Such process-based evaluation helps to attribute biases in surface variables to underlying processes and ultimately to improve climate models.

Staff Reductions and Performance Evaluations: Teacher Views on the Roles of Administrators and Colleagues.

ERIC Educational Resources Information Center

Phelan, William T.

As part of an ongoing three-year investigation into the effects of declining enrollment and reduction in force (RIF) on teachers, this paper explores: (1) teacher acceptance of exclusive administrative control over performance evaluations, and (2) teacher preferences for colleague input into the evaluation process. A sample of 85 schools was drawn…

Classroom Teacher's Performance-Based Evaluation Form (CTPBEF) for Public Education Schools in the State of Kuwait: A Framework

ERIC Educational Resources Information Center

Al-Shammari, Zaid; Yawkey, Thomas D.

2008-01-01

This investigation using Grounded Theory focuses on developing, designing and testing out an evaluation method used as a framework for this study. This framework evolved into the instrument entitled, "Classroom Teacher's Performance Based Evaluation Form (CTPBEF)". This study shows the processes and procedures used in CTPBEF's…

Performance of high intensity fed-batch mammalian cell cultures in disposable bioreactor systems.

PubMed

Smelko, John Paul; Wiltberger, Kelly Rae; Hickman, Eric Francis; Morris, Beverly Janey; Blackburn, Tobias James; Ryll, Thomas

2011-01-01

The adoption of disposable bioreactor technology as an alternate to traditional nondisposable technology is gaining momentum in the biotechnology industry. Evaluation of current disposable bioreactors systems to sustain high intensity fed-batch mammalian cell culture processes needs to be explored. In this study, an assessment was performed comparing single-use bioreactors (SUBs) systems of 50-, 250-, and 1,000-L operating scales with traditional stainless steel (SS) and glass vessels using four distinct mammalian cell culture processes. This comparison focuses on expansion and production stage performance. The SUB performance was evaluated based on three main areas: operability, process scalability, and process performance. The process performance and operability aspects were assessed over time and product quality performance was compared at the day of harvest. Expansion stage results showed disposable bioreactors mirror traditional bioreactors in terms of cellular growth and metabolism. Set-up and disposal times were dramatically reduced using the SUB systems when compared with traditional systems. Production stage runs for both Chinese hamster ovary and NS0 cell lines in the SUB system were able to model SS bioreactors runs at 100-, 200-, 2,000-, and 15,000-L scales. A single 1,000-L SUB run applying a high intensity fed-batch process was able to generate 7.5 kg of antibody with comparable product quality. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

Pharmacy practice simulations: performance of senior pharmacy students at a University in southern Brazil

PubMed Central

Galato, Dayani; Alano, Graziela M.; Trauthman, Silvana C.; França, Tainã F.

Objective A simulation process known as objective structured clinical examination (OSCE) was applied to assess pharmacy practice performed by senior pharmacy students. Methods A cross-sectional study was conducted based on documentary analysis of performance evaluation records of pharmacy practice simulations that occurred between 2005 and 2009. These simulations were related to the process of self-medication and dispensing, and were performed with the use of patients simulated. The simulations were filmed to facilitate the evaluation process. It presents the OSCE educational experience performed by pharmacy trainees of the University of Southern Santa Catarina and experienced by two evaluators. The student general performance was analyzed, and the criteria for pharmacy practice assessment often identified trainees in difficulty. Results The results of 291 simulations showed that students have an average yield performance of 70.0%. Several difficulties were encountered, such as the lack of information about the selected/prescribed treatment regimen (65.1%); inadequate communication style (21.9%); lack of identification of patients’ needs (7.7%) and inappropriate drug selection for self-medication (5.3%). Conclusions These data show that there is a need for reorientation of clinical pharmacy students because they need to improve their communication skills, and have a deeper knowledge of medicines and health problems in order to properly orient their patients. PMID:24367467

Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

NASA Astrophysics Data System (ADS)

Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

2017-12-01

LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

Performance Management as a Means of Teacher Evaluation: A South Australian Perspective

ERIC Educational Resources Information Center

Naidu, Sham

2011-01-01

The introduction of performance management in South Australian public schools raises a number of issues regarding the structure, purpose and control of the process itself and the consequences of teacher evaluation. Performance management has the potential to shape teaching and the culture of schools according to what it values and what it ignores.…

40 CFR 1066.275 - Daily dynamometer readiness verification.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR POLLUTION CONTROLS VEHICLE-TESTING PROCEDURES Dynamometer Specifications § 1066.275 Daily... automated process for this verification procedure, perform this evaluation by setting the initial speed and... your dynamometer does not perform this verification with an automated process: (1) With the dynamometer...

A corpus of full-text journal articles is a robust evaluation tool for revealing differences in performance of biomedical natural language processing tools

PubMed Central

2012-01-01

Background We introduce the linguistic annotation of a corpus of 97 full-text biomedical publications, known as the Colorado Richly Annotated Full Text (CRAFT) corpus. We further assess the performance of existing tools for performing sentence splitting, tokenization, syntactic parsing, and named entity recognition on this corpus. Results Many biomedical natural language processing systems demonstrated large differences between their previously published results and their performance on the CRAFT corpus when tested with the publicly available models or rule sets. Trainable systems differed widely with respect to their ability to build high-performing models based on this data. Conclusions The finding that some systems were able to train high-performing models based on this corpus is additional evidence, beyond high inter-annotator agreement, that the quality of the CRAFT corpus is high. The overall poor performance of various systems indicates that considerable work needs to be done to enable natural language processing systems to work well when the input is full-text journal articles. The CRAFT corpus provides a valuable resource to the biomedical natural language processing community for evaluation and training of new models for biomedical full text publications. PMID:22901054

Self Evaluation of Organizations.

ERIC Educational Resources Information Center

Pooley, Richard C.

Evaluation within human service organizations is defined in terms of accepted evaluation criteria, with reasonable expectations shown and structured into a model of systematic evaluation practice. The evaluation criteria of program effort, performance, adequacy, efficiency and process mechanisms are discussed, along with measurement information…

Development of Space Station strut design

NASA Technical Reports Server (NTRS)

Johnson, R. R.; Bluck, R. M.; Holmes, A. M. C.; Kural, M. H.

1986-01-01

Candidate Space Station struts exhibiting high stiffness (38-40 msi modulus of elasticity) were manufactured and experimentally evaluated. One and two inch diameter aluminum-clad evaluation specimens were manufactured using a unique dry fiber resin injection process. Preliminary tests were performed on strut elements having 80 percent high-modulus graphite epoxy and 20 percent aluminum. Performed tests included modulus of elasticity, thermal cycling, and coefficient of thermal expansion. The paper describes the design approach, including an analytical assessment of strut thermal deformation behavior. The major thrust of this paper is the manufacturing process which produces aluminum-clad struts with precisely controlled properties which can be fine-tuned after fabrication. An impact test and evaluation procedure for evaluating toughness is described.

Evaluation of ceramics for stator application: Gas turbine engine report

NASA Technical Reports Server (NTRS)

Trela, W.; Havstad, P. H.

1978-01-01

Current ceramic materials, component fabrication processes, and reliability prediction capability for ceramic stators in an automotive gas turbine engine environment are assessed. Simulated engine duty cycle testing of stators conducted at temperatures up to 1093 C is discussed. Materials evaluated are SiC and Si3N4 fabricated from two near-net-shape processes: slip casting and injection molding. Stators for durability cycle evaluation and test specimens for material property characterization, and reliability prediction model prepared to predict stator performance in the simulated engine environment are considered. The status and description of the work performed for the reliability prediction modeling, stator fabrication, material property characterization, and ceramic stator evaluation efforts are reported.

40 CFR 63.1312 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

....111) Owner or operator (§ 63.2) Performance evaluation (§ 63.2) Performance test (§ 63.2) Permitting...) Research and development facility (§ 63.101) Routed to a process or route to a process (§ 63.161) Run (§ 63... vessel (§ 63.161) Temperature monitoring device (§ 63.111) Test method (§ 63.2) Treatment process (§ 63...

Primary Health Care and tuberculosis: services evaluation.

PubMed

Wysocki, Anneliese Domingues; Ponce, Maria Amélia Zanon; Brunello, Maria Eugênia Firmino; Beraldo, Aline Ale; Vendramini, Silvia Helena Figueiredo; Scatena, Lúcia Marina; Ruffino, Antonio; Villa, Tereza Cristina Scatena

2017-01-01

In order to control tuberculosis, the Brazilian Ministry of Health recommends the decentralization of control actions directed to the Primary Health Care, and there are few studies on the performance of the Tuberculosis Control Program in decentralized contexts. To evaluate the performance of Primary Health Care services in tuberculosis treatment. This is an evaluative study with cross-sectional approach conducted in 2011. Two hundred and thirty-nine health professionals from Primary Health Care units were interviewed using a structured instrument based on the evaluation reference of the health services quality (structure - process - results). The performance of these services was analyzed applying techniques of descriptive statistics, validation, and construction of indicators and by determining the reduced variable "Z". The indicators "participation of professionals in tuberculosis patients' care" (structure) and "reference and counterreference" (process) had the best evaluations, whereas "professional training" (structure) and "external actions for tuberculosis control" (process) had the worst results. The decentralization of tuberculosis control actions has been taking place in a vertical manner in Primary Health Care. The challenge of controlling tuberculosis involves overcoming constraints related to the engagement, training, and turnover rates among health professionals, which is a coordination between services and monitoring of control actions in Primary Health Care.

The Decision Making Trial and Evaluation Laboratory (Dematel) and Analytic Network Process (ANP) for Safety Management System Evaluation Performance

NASA Astrophysics Data System (ADS)

Rolita, Lisa; Surarso, Bayu; Gernowo, Rahmat

2018-02-01

In order to improve airport safety management system (SMS) performance, an evaluation system is required to improve on current shortcomings and maximize safety. This study suggests the integration of the DEMATEL and ANP methods in decision making processes by analyzing causal relations between the relevant criteria and taking effective analysis-based decision. The DEMATEL method builds on the ANP method in identifying the interdependencies between criteria. The input data consists of questionnaire data obtained online and then stored in an online database. Furthermore, the questionnaire data is processed using DEMATEL and ANP methods to obtain the results of determining the relationship between criteria and criteria that need to be evaluated. The study cases on this evaluation system were Adi Sutjipto International Airport, Yogyakarta (JOG); Ahmad Yani International Airport, Semarang (SRG); and Adi Sumarmo International Airport, Surakarta (SOC). The integration grades SMS performance criterion weights in a descending order as follow: safety and destination policy, safety risk management, healthcare, and safety awareness. Sturges' formula classified the results into nine grades. JOG and SMG airports were in grade 8, while SOG airport was in grade 7.

Optimization of High-Dimensional Functions through Hypercube Evaluation

PubMed Central

Abiyev, Rahib H.; Tunay, Mustafa

2015-01-01

A novel learning algorithm for solving global numerical optimization problems is proposed. The proposed learning algorithm is intense stochastic search method which is based on evaluation and optimization of a hypercube and is called the hypercube optimization (HO) algorithm. The HO algorithm comprises the initialization and evaluation process, displacement-shrink process, and searching space process. The initialization and evaluation process initializes initial solution and evaluates the solutions in given hypercube. The displacement-shrink process determines displacement and evaluates objective functions using new points, and the search area process determines next hypercube using certain rules and evaluates the new solutions. The algorithms for these processes have been designed and presented in the paper. The designed HO algorithm is tested on specific benchmark functions. The simulations of HO algorithm have been performed for optimization of functions of 1000-, 5000-, or even 10000 dimensions. The comparative simulation results with other approaches demonstrate that the proposed algorithm is a potential candidate for optimization of both low and high dimensional functions. PMID:26339237

Potential pros and cons of external healthcare performance evaluation systems: real-life perspectives on Iranian hospital evaluation and accreditation program

PubMed Central

Jaafaripooyan, Ebrahim

2014-01-01

Background: Performance evaluation is essential to quality improvement in healthcare. The current study has identified the potential pros and cons of external healthcare evaluation programs, utilizing them subsequently to look into the merits of a similar case in a developing country. Methods: A mixed method study employing both qualitative and quantitative data collection and analysis techniques was adopted to achieve the study end. Subject Matter Experts (SMEs) and professionals were approached for two-stage process of data collection. Results: Potential advantages included greater attractiveness of high accreditation rank healthcare organizations to their customers/purchasers and boosted morale of their personnel. Downsides, as such, comprised the programs’ over-reliance on value judgment of surveyors, routinization and incurring undue cost on the organizations. In addition, the improved, standardized care processes as well as the judgmental nature of program survey were associated, as pros and cons, to the program investigated by the professionals. Conclusion: Besides rendering a tentative assessment of Iranian hospital evaluation program, the study provides those running external performance evaluations with a lens to scrutinize the virtues of their own evaluation systems through identifying the potential advantages and drawbacks of such programs. Moreover, the approach followed could be utilized for performance assessment of similar evaluation programs. PMID:25279381

Potential pros and cons of external healthcare performance evaluation systems: real-life perspectives on Iranian hospital evaluation and accreditation program.

PubMed

Jaafaripooyan, Ebrahim

2014-09-01

Performance evaluation is essential to quality improvement in healthcare. The current study has identified the potential pros and cons of external healthcare evaluation programs, utilizing them subsequently to look into the merits of a similar case in a developing country. A mixed method study employing both qualitative and quantitative data collection and analysis techniques was adopted to achieve the study end. Subject Matter Experts (SMEs) and professionals were approached for two-stage process of data collection. Potential advantages included greater attractiveness of high accreditation rank healthcare organizations to their customers/purchasers and boosted morale of their personnel. Downsides, as such, comprised the programs' over-reliance on value judgment of surveyors, routinization and incurring undue cost on the organizations. In addition, the improved, standardized care processes as well as the judgmental nature of program survey were associated, as pros and cons, to the program investigated by the professionals. Besides rendering a tentative assessment of Iranian hospital evaluation program, the study provides those running external performance evaluations with a lens to scrutinize the virtues of their own evaluation systems through identifying the potential advantages and drawbacks of such programs. Moreover, the approach followed could be utilized for performance assessment of similar evaluation programs.

EVALUATION OF REGISTRATION, COMPRESSION AND CLASSIFICATION ALGORITHMS

NASA Technical Reports Server (NTRS)

Jayroe, R. R.

1994-01-01

Several types of algorithms are generally used to process digital imagery such as Landsat data. The most commonly used algorithms perform the task of registration, compression, and classification. Because there are different techniques available for performing registration, compression, and classification, imagery data users need a rationale for selecting a particular approach to meet their particular needs. This collection of registration, compression, and classification algorithms was developed so that different approaches could be evaluated and the best approach for a particular application determined. Routines are included for six registration algorithms, six compression algorithms, and two classification algorithms. The package also includes routines for evaluating the effects of processing on the image data. This collection of routines should be useful to anyone using or developing image processing software. Registration of image data involves the geometrical alteration of the imagery. Registration routines available in the evaluation package include image magnification, mapping functions, partitioning, map overlay, and data interpolation. The compression of image data involves reducing the volume of data needed for a given image. Compression routines available in the package include adaptive differential pulse code modulation, two-dimensional transforms, clustering, vector reduction, and picture segmentation. Classification of image data involves analyzing the uncompressed or compressed image data to produce inventories and maps of areas of similar spectral properties within a scene. The classification routines available include a sequential linear technique and a maximum likelihood technique. The choice of the appropriate evaluation criteria is quite important in evaluating the image processing functions. The user is therefore given a choice of evaluation criteria with which to investigate the available image processing functions. All of the available evaluation criteria basically compare the observed results with the expected results. For the image reconstruction processes of registration and compression, the expected results are usually the original data or some selected characteristics of the original data. For classification processes the expected result is the ground truth of the scene. Thus, the comparison process consists of determining what changes occur in processing, where the changes occur, how much change occurs, and the amplitude of the change. The package includes evaluation routines for performing such comparisons as average uncertainty, average information transfer, chi-square statistics, multidimensional histograms, and computation of contingency matrices. This collection of routines is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 computer with a central memory requirement of approximately 662K of 8 bit bytes. This collection of image processing and evaluation routines was developed in 1979.

Engineering development of selective agglomeration: Task 5, Bench- scale process testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-09-01

Under the overall objectives of DOE Contract ``Engineering Development of Selective Agglomeration,`` there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

Engineering development of selective agglomeration: Task 5, Bench- scale process testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-09-01

Under the overall objectives of DOE Contract Engineering Development of Selective Agglomeration,'' there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes

NASA Astrophysics Data System (ADS)

Sari, M. M.; Noordin, M. Y.; Brusa, E.

2012-09-01

Electrical discharge machining (EDM) is one of the most accurate non traditional manufacturing processes available for creating tiny apertures, complex or simple shapes and geometries within parts and assemblies. Performance of the EDM process is usually evaluated in terms of surface roughness, existence of cracks, voids and recast layer on the surface of product, after machining. Unfortunately, the high heat generated on the electrically discharged material during the EDM process decreases the quality of products. Carbon nanotubes display unexpected strength and unique electrical and thermal properties. Multi-wall carbon nanotubes are therefore on purpose added to the dielectric used in the EDM process to improve its performance when machining the AISI H13 tool steel, by means of copper electrodes. Some EDM parameters such as material removal rate, electrode wear rate, surface roughness and recast layer are here first evaluated, then compared to the outcome of EDM performed without using nanotubes mixed to the dielectric. Independent variables investigated are pulse on time, peak current and interval time. Experimental evidences show that EDM process operated by mixing multi-wall carbon nanotubes within the dielectric looks more efficient, particularly if machining parameters are set at low pulse of energy.

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

40 CFR 63.145 - Process wastewater provisions-test methods and procedures to determine compliance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 63.138 of this subpart. Owners or operators conducting a design evaluation shall comply with the...) Performance tests and design evaluations for treatment processes. If design steam stripper option (§ 63.138(d)) or RCRA option (§ 63.138(h)) is selected to comply with § 63.138, neither a design evaluation nor a...

Faculty Performance Management System: The Faculty Development/Evaluation System at Beaufort Technical College, 1986-1987. Revised.

ERIC Educational Resources Information Center

Tobias, Earole; And Others

Designed for faculty members at Beaufort Technical College (BTC) in South Carolina, this handbook describes the college's faculty evaluation process and procedures. The first sections of the handbook explain the rationale and method for the faculty evaluation process, state the purposes and objectives of the system, and offer a model which breaks…

Evaluation methodology for comparing memory and communication of analytic processes in visual analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ragan, Eric D; Goodall, John R

2014-01-01

Provenance tools can help capture and represent the history of analytic processes. In addition to supporting analytic performance, provenance tools can be used to support memory of the process and communication of the steps to others. Objective evaluation methods are needed to evaluate how well provenance tools support analyst s memory and communication of analytic processes. In this paper, we present several methods for the evaluation of process memory, and we discuss the advantages and limitations of each. We discuss methods for determining a baseline process for comparison, and we describe various methods that can be used to elicit processmore » recall, step ordering, and time estimations. Additionally, we discuss methods for conducting quantitative and qualitative analyses of process memory. By organizing possible memory evaluation methods and providing a meta-analysis of the potential benefits and drawbacks of different approaches, this paper can inform study design and encourage objective evaluation of process memory and communication.« less

Psychometric Evaluation of Children with Auditory Processing Disorder (APD): Comparison with Normal-Hearing and Clinical Non-APD Groups

ERIC Educational Resources Information Center

Iliadou, Vasiliki; Bamiou, Doris Eva

2012-01-01

Purpose: To investigate the clinical utility of the Children's Auditory Processing Performance Scale (CHAPPS; Smoski, Brunt, & Tannahill, 1992) to evaluate listening ability in 12-year-old children referred for auditory processing assessment. Method: This was a prospective case control study of 97 children (age range = 11;4 [years;months] to…

40 CFR 63.2460 - What requirements must I meet for batch process vents?

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (ii) When you conduct a performance test or design evaluation for a non-flare control device used to... paragraphs (c)(9)(ii)(A) through (D) of this section. The design evaluation option for small control devices...) of this section. (b) Group status. If a process has batch process vents, as defined in § 63.2550, you...

40 CFR 63.2460 - What requirements must I meet for batch process vents?

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (ii) When you conduct a performance test or design evaluation for a non-flare control device used to... paragraphs (c)(9)(ii)(A) through (D) of this section. The design evaluation option for small control devices...) of this section. (b) Group status. If a process has batch process vents, as defined in § 63.2550, you...

40 CFR 63.2460 - What requirements must I meet for batch process vents?

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (ii) When you conduct a performance test or design evaluation for a non-flare control device used to... paragraphs (c)(9)(ii)(A) through (D) of this section. The design evaluation option for small control devices... (c) of this section. (b) Group status. If a process has batch process vents, as defined in § 63.2550...

40 CFR 63.2460 - What requirements must I meet for batch process vents?

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (ii) When you conduct a performance test or design evaluation for a non-flare control device used to... paragraphs (c)(9)(ii)(A) through (D) of this section. The design evaluation option for small control devices... (c) of this section. (b) Group status. If a process has batch process vents, as defined in § 63.2550...

40 CFR 63.2460 - What requirements must I meet for batch process vents?

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (ii) When you conduct a performance test or design evaluation for a non-flare control device used to... paragraphs (c)(9)(ii)(A) through (D) of this section. The design evaluation option for small control devices... (c) of this section. (b) Group status. If a process has batch process vents, as defined in § 63.2550...

Clinical peer review program self-evaluation for US hospitals.

PubMed

Edwards, Marc T

2010-01-01

Prior research has shown wide variation in clinical peer review program structure, process, governance, and perceived effectiveness. This study sought to validate the utility of a Peer Review Program Self-Evaluation Tool as a potential guide to physician and hospital leaders seeking greater program value. Data from 330 hospitals show that the total score from the self-evaluation tool is strongly associated with perceived quality impact. Organizational culture also plays a significant role. When controlling for these factors, there was no evidence of benefit from a multispecialty review process. Physicians do not generally use reliable methods to measure clinical performance. A high rate of change since 2007 has not produced much improvement. The Peer Review Program Self-Evaluation Tool reliably differentiates hospitals along a continuum of perceived program performance. The full potential of peer review as a process to improve the quality and safety of care has yet to be realized.

Statewide transit evaluation : Michigan

DOT National Transportation Integrated Search

1981-07-01

The objective of this report is to share the experience gained during the : development of a performance evaluation methodology for public transportation in : the State of Michigan. The report documents the process through which an : evaluation metho...

The evaluation and enhancement of quality, environmental protection and seaport safety by using FAHP

NASA Astrophysics Data System (ADS)

Tadic, Danijela; Aleksic, Aleksandar; Popovic, Pavle; Arsovski, Slavko; Castelli, Ana; Joksimovic, Danijela; Stefanovic, Miladin

2017-02-01

The evaluation and enhancement of business processes in any organization in an uncertain environment presents one of the main requirements of ISO 9000:2008 and has a key effect on competitive advantage and long-term sustainability. The aim of this paper can be defined as the identification and discussion of some of the most important business processes of seaports and the performances of business processes and their key performance indicators (KPIs). The complexity and importance of the treated problem call for analytic methods rather than intuitive decisions. The existing decision variables of the considered problem are described by linguistic expressions which are modelled by triangular fuzzy numbers (TFNs). In this paper, the modified fuzzy extended analytic hierarchy process (FAHP) is proposed. The assessment of the relative importance of each pair of performances and their key performance indicators are stated as a fuzzy group decision-making problem. By using the modified fuzzy extended analytic hierarchy process, the fuzzy rank of business processes of a seaport is obtained. The model is tested through an illustrative example with real-life data, where the obtained data suggest measures which should enhance business strategy and improve key performance indicators. The future improvement is based on benchmark and knowledge sharing.

Performance Evaluation of Nano-JASMINE

NASA Astrophysics Data System (ADS)

Hatsutori, Y.; Kobayashi, Y.; Gouda, N.; Yano, T.; Murooka, J.; Niwa, Y.; Yamada, Y.

We report the results of performance evaluation of the first Japanese astrometry satellite, Nano-JASMINE. It is a very small satellite and weighs only 35 kg. It aims to carry out astrometry measurement of nearby bright stars (z ≤ 7.5 mag) with an accuracy of 3 milli-arcseconds. Nano-JASMINE will be launched by Cyclone-4 rocket in August 2011 from Brazil. The current status is in the process of evaluating the performances. A series of performance tests and numerical analysis were conducted. As a result, the engineering model (EM) of the telescope was measured to be achieving a diffraction-limited performance and confirmed that it has enough performance for scientific astrometry.

Silicon solar cell process. Development, fabrication and analysis

NASA Technical Reports Server (NTRS)

Yoo, H. I.; Iles, P. A.; Tanner, D. P.

1978-01-01

Solar cells were fabricated from unconventional silicon sheets, and the performances were characterized with an emphasis on statistical evaluation. A number of solar cell fabrication processes were used and conversion efficiency was measured under AMO condition at 25 C. Silso solar cells using standard processing showed an average efficiency of about 9.6%. Solar cells with back surface field process showed about the same efficiency as the cells from standard process. Solar cells from grain boundary passivation process did not show any improvements in solar cell performance.

Selection for Surgical Training: An Evidence-Based Review.

PubMed

Schaverien, Mark V

2016-01-01

The predictive relationship between candidate selection criteria for surgical training programs and future performance during and at the completion of training has been investigated for several surgical specialties, however there is no interspecialty agreement regarding which selection criteria should be used. Better understanding the predictive reliability between factors at selection and future performance may help to optimize the process and lead to greater standardization of the surgical selection process. PubMed and Ovid MEDLINE databases were searched. Over 560 potentially relevant publications were identified using the search strategy and screened using the Cochrane Collaboration Data Extraction and Assessment Template. 57 studies met the inclusion criteria. Several selection criteria used in the traditional selection demonstrated inconsistent correlation with subsequent performance during and at the end of surgical training. The following selection criteria, however, demonstrated good predictive relationships with subsequent resident performance: USMLE examination scores, Letters of Recommendation (LOR) including the Medical Student Performance Evaluation (MSPE), academic performance during clinical clerkships, the interview process, displaying excellence in extracurricular activities, and the use of unadjusted rank lists. This systematic review supports that the current selection process needs to be further evaluated and improved. Multicenter studies using standardized outcome measures of success are now required to improve the reliability of the selection process to select the best trainees. Published by Elsevier Inc.

Facilitating Co-Design for Extreme-Scale Systems Through Lightweight Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelmann, Christian; Lauer, Frank

This work focuses on tools for investigating algorithm performance at extreme scale with millions of concurrent threads and for evaluating the impact of future architecture choices to facilitate the co-design of high-performance computing (HPC) architectures and applications. The approach focuses on lightweight simulation of extreme-scale HPC systems with the needed amount of accuracy. The prototype presented in this paper is able to provide this capability using a parallel discrete event simulation (PDES), such that a Message Passing Interface (MPI) application can be executed at extreme scale, and its performance properties can be evaluated. The results of an initial prototype aremore » encouraging as a simple 'hello world' MPI program could be scaled up to 1,048,576 virtual MPI processes on a four-node cluster, and the performance properties of two MPI programs could be evaluated at up to 16,384 virtual MPI processes on the same system.« less

Hybrid performance measurement of a business process outsourcing - A Malaysian company perspective

NASA Astrophysics Data System (ADS)

Oluyinka, Oludapo Samson; Tamyez, Puteri Fadzline; Kie, Cheng Jack; Freida, Ayodele Ozavize

2017-05-01

It's no longer new that customer perceived value for product and services are now greatly influenced by its psychological and social advantages. In order to meet up with the increasing operational cost, response time, quality and innovative capabilities many companies turned their fixed operational cost to a variable cost through outsourcing. Hence, the researcher explored different underlying outsourcing theories and infer that these theories are essential to performance improvement. In this study, the researcher evaluates the performance of a business process outsource company by a combination of lean and agile method. To test the hypotheses, we analyze different variability that a business process company faces, how lean and agile have been used in other industry to address such variability and discuss the result using a predictive multiple regression analysis on data collected from companies in Malaysia. The findings from this study revealed that while each method has its own advantage, a business process outsource company could achieve more (up to 87%) increase in performance level by developing a strategy which focuses on a perfect mixture of lean and agile improvement methods. Secondly, this study shows that performance indicator could be better evaluated with non-metrics variables of the agile method. Thirdly, this study also shows that business process outsourcing company could perform better when they concentrate more on strengthening internal process integration of employees.

Construction of mammographic examination process ontology using bottom-up hierarchical task analysis.

PubMed

Yagahara, Ayako; Yokooka, Yuki; Jiang, Guoqian; Tsuji, Shintarou; Fukuda, Akihisa; Nishimoto, Naoki; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2018-03-01

Describing complex mammography examination processes is important for improving the quality of mammograms. It is often difficult for experienced radiologic technologists to explain the process because their techniques depend on their experience and intuition. In our previous study, we analyzed the process using a new bottom-up hierarchical task analysis and identified key components of the process. Leveraging the results of the previous study, the purpose of this study was to construct a mammographic examination process ontology to formally describe the relationships between the process and image evaluation criteria to improve the quality of mammograms. First, we identified and created root classes: task, plan, and clinical image evaluation (CIE). Second, we described an "is-a" relation referring to the result of the previous study and the structure of the CIE. Third, the procedural steps in the ontology were described using the new properties: "isPerformedBefore," "isPerformedAfter," and "isPerformedAfterIfNecessary." Finally, the relationships between tasks and CIEs were described using the "isAffectedBy" property to represent the influence of the process on image quality. In total, there were 219 classes in the ontology. By introducing new properties related to the process flow, a sophisticated mammography examination process could be visualized. In relationships between tasks and CIEs, it became clear that the tasks affecting the evaluation criteria related to positioning were greater in number than those for image quality. We developed a mammographic examination process ontology that makes knowledge explicit for a comprehensive mammography process. Our research will support education and help promote knowledge sharing about mammography examination expertise.

Does resident ranking during recruitment accurately predict subsequent performance as a surgical resident?

PubMed

Fryer, Jonathan P; Corcoran, Noreen; George, Brian; Wang, Ed; Darosa, Debra

2012-01-01

While the primary goal of ranking applicants for surgical residency training positions is to identify the candidates who will subsequently perform best as surgical residents, the effectiveness of the ranking process has not been adequately studied. We evaluated our general surgery resident recruitment process between 2001 and 2011 inclusive, to determine if our recruitment ranking parameters effectively predicted subsequent resident performance. We identified 3 candidate ranking parameters (United States Medical Licensing Examination [USMLE] Step 1 score, unadjusted ranking score [URS], and final adjusted ranking [FAR]), and 4 resident performance parameters (American Board of Surgery In-Training Examination [ABSITE] score, PGY1 resident evaluation grade [REG], overall REG, and independent faculty rating ranking [IFRR]), and assessed whether the former were predictive of the latter. Analyses utilized Spearman correlation coefficient. We found that the URS, which is based on objective and criterion based parameters, was a better predictor of subsequent performance than the FAR, which is a modification of the URS based on subsequent determinations of the resident selection committee. USMLE score was a reliable predictor of ABSITE scores only. However, when we compared our worst residence performances with the performances of the other residents in this evaluation, the data did not produce convincing evidence that poor resident performances could be reliably predicted by any of the recruitment ranking parameters. Finally, stratifying candidates based on their rank range did not effectively define a ranking cut-off beyond which resident performance would drop off. Based on these findings, we recommend surgery programs may be better served by utilizing a more structured resident ranking process and that subsequent adjustments to the rank list generated by this process should be undertaken with caution. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Concepts of skin protection: considerations for the evaluation and terminology of the performance of skin protective equipment.

PubMed

Brouwer, Derk H; Aitken, Robert J; Oppl, Reinhard; Cherrie, John W

2005-09-01

This article proposes a common language for better understanding processes involved in dermal exposure and skin protection. A conceptual model has been developed that systematically describes the transport of agent mass from sources, eventually resulting in "loading" of the skin surface or the skin contaminant layer. In view of a harmonized glossary of exposure terminology this is considered the exposure surface. Loading is defined as agent mass present in this layer divided by the exposure surface area. Skin protective equipment (SPE) is meant to reduce uptake, that is, an agent crosses the absorption barrier of the skin, by intervening in the processes of loading the exposure surface; however, the design of the equipment may fail to cover skin surface entirely. In addition, part of the mass intercepted by the SPE may reach the skin surface either by permeation, penetration, or by transfer when touching the contaminated exterior of the SPE. Evaluation of SPE performance has earlier focused on chemical resistance performance testing for permeation, penetration, or degradation of SPE-materials. In use-scenario practice, however, all processes will occur concurrently. Thus, SPE field performance evaluation including user-SPE interaction complementary to material testing is warranted. Results of laboratory testing for SPE-materials are reported as substance-specific breakthrough times and permeation rates. SPE field performance should be evaluated for reduction of either uptake or parameters that reflect the outcome of dermal exposure. Ideally, this should be based on the results of intervention-type workplace studies, for (e.g., assessment of exposure loading). The level of reduction can be expressed as a protection factor (ratio without/with SPE) for different parameters of dermal exposure or uptake. It is concluded that for evaluation of SPE-type performance, generic protection factors can be derived for substance-independent processes (e.g., reduction of exposure loading) but not for substance-specific reduction of uptake.

Improvement of the Performance of an Electrocoagulation Process System Using Fuzzy Control of pH.

PubMed

Demirci, Yavuz; Pekel, Lutfiye Canan; Altinten, Ayla; Alpbaz, Mustafa

2015-12-01

The removal efficiencies of electrocoagulation (EC) systems are highly dependent on the initial value of pH. If an EC system has an acidic influent, the pH of the effluent increases during the treatment process; conversely, if such a system has an alkaline influent, the pH of the effluent decreases during the treatment process. Thus, changes in the pH of the wastewater affect the efficiency of the EC process. In this study, we investigated the dynamic effects of pH. To evaluate approaches for preventing increases in the pH of the system, the MATLAB/Simulink program was used to develop and evaluate an on-line computer-based system for pH control. The aim of this work was to study Proportional-Integral-Derivative (PID) control and fuzzy control of the pH of a real textile wastewater purification process using EC. The performances and dynamic behaviors of these two control systems were evaluated based on determinations of COD, colour, and turbidity removal efficiencies.

ANALYZING THE SUSTAINABILITY OF GREEN PROCESSES: METHODS FOR EVALUATING THE FOUR E'S

EPA Science Inventory

Analyzing the Sustainability of Green Processes: Methods for Evaluating the Four E's

By Raymond L. Smith and Michael A. Gonzalez

A considerable amount of research is being performed under the banners of "sustainable" and/or "green." The development of chemistries...

Effects of straw processing and pen overstocking on the growth performance and sorting characteristics of diets offered to replacement Holstein dairy heifers

USDA-ARS?s Scientific Manuscript database

The effects of pen-stocking density and straw processing on the growth performance of Holstein dairy heifers housed in a free-stall system are not well understood. Our objectives were to evaluate these factors on the growth performance, feed-bunk sorting behaviors, daily behavioral traits, and hygie...

New method for rapid testing of bond strength for wood adhesives

Treesearch

James M. Wescott; Michael J. Birkeland; Amy E. Traska; Charles R. Frihart; Brice N. Dally

2007-01-01

In developing new adhesives for wood bonding, the testing of bond performance can often be a limiting factor in the development process. Evaluating the bond performance of an adhesive that can be prepared in less than a day often takes several days using standard performance tests. This testing slows the development process and may cause a company to abandon a...

Quality Control and Nondestructive Evaluation Techniques for Composites. Part 1. Overview of Characterization Techniques for Composite Reliability

DTIC Science & Technology

1982-05-01

MONITORING AND MANAGEMENT , 34 7.0 NONDESTRUCTIVE EVALUATION ( NDE ) 37 8. 0 SURFACE NDE 44 9.0 PERFORMANCE AND PROOF TESTING 46 10.0 SUMMARY AND...Chemical Quality Assurance Testing 2. Processability Testing 3. Cure Monitoring and Management 4. Nondestructive Evaluation ( NDE ) 5. Performance and...the management concept for implementing the specific tests. Chemical analysis, nondestructive evaluation ( NDE ) and environmental fatigue testing of

An investigation of squeeze-cast alloy 718

NASA Technical Reports Server (NTRS)

Gamwell, W. R.

1993-01-01

Alloy 718 billets produced by the squeeze-cast process have been evaluated for use as potential replacements for propulsion engine components which are normally produced from forgings. Alloy 718 billets were produced using various processing conditions. Structural characterizations were performed on 'as-cast' billets. As-cast billets were then homogenized and solution treated and aged according to conventional heat-treatment practices for this alloy. Mechanical property evaluations were performed on heat-treated billets. As-cast macrostructures and microstructures varied with squeeze-cast processing parameters. Mechanical properties varied with squeeze-cast processing parameters and heat treatments. One billet exhibited a defect free, refined microstructure, with mechanical properties approaching those of wrought alloy 718 bar, confirming the feasibility of squeeze-casting alloy 718. However, further process optimization is required, and further structural and mechanical property improvements are expected with process optimization.

Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry

NASA Astrophysics Data System (ADS)

Adnan, F. A.; Romlay, F. R. M.; Shafiq, M.

2018-04-01

Owing to the advent of the industrial revolution 4.0, the need for further evaluating processes applied in the additive manufacturing application particularly the computational process for slicing is non-trivial. This paper evaluates a real-time slicing algorithm for slicing an STL formatted computer-aided design (CAD). A line-plane intersection equation was applied to perform the slicing procedure at any given height. The application of this algorithm has found to provide a better computational time regardless the number of facet in the STL model. The performance of this algorithm is evaluated by comparing the results of the computational time for different geometry.

Conceptual Knowledge Influences Decision Making Differently in Individuals with High or Low Cognitive Flexibility: An ERP Study.

PubMed

Dong, Xiaofei; Du, Xiumin; Qi, Bing

2016-01-01

Studies using the Iowa Gambling Task (IGT) have distinguished between good and bad decision makers and have provided an explanation for deficits in decision making. Previous studies have demonstrated a link between Wisconsin Card Sorting Test (WCST) performance and IGT performance, but the results were not consistent and failed to explain why WCST performance can predict IGT performance. The present study aimed to demonstrate that WCST performance can predict IGT performance and to identify the cognitive component of the WCST that affects IGT performance using event-related potentials (ERPs). In this study, 39 healthy subjects (5 subjects were excluded) were divided into a high group and a low group based on their global score on the WCST. A single-choice version of the IGT was used to eliminate the impact of retrieval strategies on the choice evaluation process and interference due to uncorrelated decks. Differences in the underlying neural mechanisms and explicit knowledge between the two groups during the three stages of the decision-making process were described. Based on the information processing perspective, we divided the decision-making process into three stages: choice evaluation, response selection, and feedback processing. The behavioral results showed that the highly cognitively flexible participants performed better on the IGT and acquired more knowledge of the task. The ERP results showed that during the choice evaluation stage, the P300 recorded from central and parietal regions when a bad deck appeared was larger in the high group participants than in the low group participants. During the response selection stage, the effect of choice type was significant only in the frontal region in the high group, with a larger effect for passing. During the feedback evaluation stage, a larger FRN was evoked for a loss than for a win in the high group, whereas the FRN effect was absent in the low group. Compared with the participants with low cognitive flexibility, the participants with high cognitive flexibility performed better on the IGT, acquired more knowledge of the task, and displayed more obvious somatic markers. The low group participants showed reduced working memory abilities during the choice evaluation stage. The appropriate somatic markers reflected by the DPN is formed only when conceptual knowledge is gained in the response selection stage. The absence of an FRN effect in the subjects who performed poorly on the WCST suggests a significant deficit in feedback learning and reward prediction.

Conceptual Knowledge Influences Decision Making Differently in Individuals with High or Low Cognitive Flexibility: An ERP Study

PubMed Central

Dong, Xiaofei; Du, Xiumin; Qi, Bing

2016-01-01

Objective Studies using the Iowa Gambling Task (IGT) have distinguished between good and bad decision makers and have provided an explanation for deficits in decision making. Previous studies have demonstrated a link between Wisconsin Card Sorting Test (WCST) performance and IGT performance, but the results were not consistent and failed to explain why WCST performance can predict IGT performance. The present study aimed to demonstrate that WCST performance can predict IGT performance and to identify the cognitive component of the WCST that affects IGT performance using event-related potentials (ERPs). Methods In this study, 39 healthy subjects (5 subjects were excluded) were divided into a high group and a low group based on their global score on the WCST. A single-choice version of the IGT was used to eliminate the impact of retrieval strategies on the choice evaluation process and interference due to uncorrelated decks. Differences in the underlying neural mechanisms and explicit knowledge between the two groups during the three stages of the decision-making process were described. Results Based on the information processing perspective, we divided the decision-making process into three stages: choice evaluation, response selection, and feedback processing. The behavioral results showed that the highly cognitively flexible participants performed better on the IGT and acquired more knowledge of the task. The ERP results showed that during the choice evaluation stage, the P300 recorded from central and parietal regions when a bad deck appeared was larger in the high group participants than in the low group participants. During the response selection stage, the effect of choice type was significant only in the frontal region in the high group, with a larger effect for passing. During the feedback evaluation stage, a larger FRN was evoked for a loss than for a win in the high group, whereas the FRN effect was absent in the low group. Conclusion Compared with the participants with low cognitive flexibility, the participants with high cognitive flexibility performed better on the IGT, acquired more knowledge of the task, and displayed more obvious somatic markers. The low group participants showed reduced working memory abilities during the choice evaluation stage. The appropriate somatic markers reflected by the DPN is formed only when conceptual knowledge is gained in the response selection stage. The absence of an FRN effect in the subjects who performed poorly on the WCST suggests a significant deficit in feedback learning and reward prediction. PMID:27479484

Formative Evaluation: Interpretation and Participation.

ERIC Educational Resources Information Center

Cox, Roy

An Approach to formative evaluation is described that attempts to actively involve students and explore the meaning of processes, activities, and performances in terms of the wide variety of students' perceptions and responses. When poor student performance is not attributable to lack of effort or ability, the need for a more personal…

Performance analysis of different tuning rules for an isothermal CSTR using integrated EPC and SPC

NASA Astrophysics Data System (ADS)

Roslan, A. H.; Karim, S. F. Abd; Hamzah, N.

2018-03-01

This paper demonstrates the integration of Engineering Process Control (EPC) and Statistical Process Control (SPC) for the control of product concentration of an isothermal CSTR. The objectives of this study are to evaluate the performance of Ziegler-Nichols (Z-N), Direct Synthesis, (DS) and Internal Model Control (IMC) tuning methods and determine the most effective method for this process. The simulation model was obtained from past literature and re-constructed using SIMULINK MATLAB to evaluate the process response. Additionally, the process stability, capability and normality were analyzed using Process Capability Sixpack reports in Minitab. Based on the results, DS displays the best response for having the smallest rise time, settling time, overshoot, undershoot, Integral Time Absolute Error (ITAE) and Integral Square Error (ISE). Also, based on statistical analysis, DS yields as the best tuning method as it exhibits the highest process stability and capability.

Analysis of Business Process at PT XYZ by Using SCOR Thread Diagram

NASA Astrophysics Data System (ADS)

Sembiring, M. T.; Rambe, H. C.

2017-03-01

Supply Chain Operations Reference (SCOR) is a standard supply chain performance evaluation model which is proposed by Supply Chain Council (SCC). SCOR makes companies can analyse and evaluate their supply chain performance. SCOR has Thread Diagram which describes business process simply and systematically to help the analysis of company’s business process. This research takes place in PT XYZ that is involved in Crude Palm Oil (CPO) industry. PT XYZ used to be the market leader of CPO industry but nowadays they have a trouble to compete with new competitors. The purpose of this study is to provide the input for PT XYZ business process improvement to enhance the competitiveness of the company with the others. The result obtained shows that there are two performance metrics that are not reached. The analysis of business process shows the lack of control role of PT XYZ to supplier and customer side which is going to be the suggestion of improvement.

Integrated payload and mission planning, phase 3. Volume 1: Integrated payload and mission planning process evaluation

NASA Technical Reports Server (NTRS)

Sapp, T. P.; Davin, D. E.

1977-01-01

The integrated payload and mission planning process for STS payloads was defined, and discrete tasks which evaluate performance and support initial implementation of this process were conducted. The scope of activity was limited to NASA and NASA-related payload missions only. The integrated payload and mission planning process was defined in detail, including all related interfaces and scheduling requirements. Related to the payload mission planning process, a methodology for assessing early Spacelab mission manager assignment schedules was defined.

Cast Stone Formulation for Nuclear Waste Immobilization at Higher Sodium Concentrations

DOE PAGES

Fox, Kevin; Cozzi, Alex; Roberts, Kimberly; ...

2014-11-01

Low activity radioactive waste at U.S. Department of Energy sites can be immobilized for permanent disposal using cementitious waste forms. This study evaluated waste forms produced with simulated wastes at concentrations up to twice that of currently operating processes. The simulated materials were evaluated for their fresh properties, which determine processability, and cured properties, which determine waste form performance. The results show potential for greatly reducing the volume of material. Fresh properties were sufficient to allow for processing via current practices. Cured properties such as compressive strength meet disposal requirements. Leachability indices provide an indication of expected long-term performance.

Solar industrial process heat systems: An assessment of standards for materials and components

NASA Astrophysics Data System (ADS)

Rossiter, W. J.; Shipp, W. E.

1981-09-01

A study was conducted to obtain information on the performance of materials and components in operational solar industrial process heat (PH) systems, and to provide recommendations for the development of standards including evaluative test procedures for materials and components. An assessment of the needs for standards for evaluating the long-term performance of materials and components of IPH systems was made. The assessment was based on the availability of existing standards, and information obtained from a field survey of operational systems, the literature, and discussions with individuals in the industry. Field inspections of 10 operational IPH systems were performed.

The role of interior watershed processes in improving parameter estimation and performance of watershed models

USDA-ARS?s Scientific Manuscript database

Watershed models typically are evaluated solely through comparison of in-stream water and nutrient fluxes with measured data using established performance criteria, whereas processes and responses within the interior of the watershed that govern these global fluxes often are neglected. Due to the l...

A methodology for evaluation of an interactive multispectral image processing system

NASA Technical Reports Server (NTRS)

Kovalick, William M.; Newcomer, Jeffrey A.; Wharton, Stephen W.

1987-01-01

Because of the considerable cost of an interactive multispectral image processing system, an evaluation of a prospective system should be performed to ascertain if it will be acceptable to the anticipated users. Evaluation of a developmental system indicated that the important system elements include documentation, user friendliness, image processing capabilities, and system services. The criteria and evaluation procedures for these elements are described herein. The following factors contributed to the success of the evaluation of the developmental system: (1) careful review of documentation prior to program development, (2) construction and testing of macromodules representing typical processing scenarios, (3) availability of other image processing systems for referral and verification, and (4) use of testing personnel with an applications perspective and experience with other systems. This evaluation was done in addition to and independently of program testing by the software developers of the system.

SU-D-BRD-02: A Web-Based Image Processing and Plan Evaluation Platform (WIPPEP) for Future Cloud-Based Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chai, X; Liu, L; Xing, L

Purpose: Visualization and processing of medical images and radiation treatment plan evaluation have traditionally been constrained to local workstations with limited computation power and ability of data sharing and software update. We present a web-based image processing and planning evaluation platform (WIPPEP) for radiotherapy applications with high efficiency, ubiquitous web access, and real-time data sharing. Methods: This software platform consists of three parts: web server, image server and computation server. Each independent server communicates with each other through HTTP requests. The web server is the key component that provides visualizations and user interface through front-end web browsers and relay informationmore » to the backend to process user requests. The image server serves as a PACS system. The computation server performs the actual image processing and dose calculation. The web server backend is developed using Java Servlets and the frontend is developed using HTML5, Javascript, and jQuery. The image server is based on open source DCME4CHEE PACS system. The computation server can be written in any programming language as long as it can send/receive HTTP requests. Our computation server was implemented in Delphi, Python and PHP, which can process data directly or via a C++ program DLL. Results: This software platform is running on a 32-core CPU server virtually hosting the web server, image server, and computation servers separately. Users can visit our internal website with Chrome browser, select a specific patient, visualize image and RT structures belonging to this patient and perform image segmentation running Delphi computation server and Monte Carlo dose calculation on Python or PHP computation server. Conclusion: We have developed a webbased image processing and plan evaluation platform prototype for radiotherapy. This system has clearly demonstrated the feasibility of performing image processing and plan evaluation platform through a web browser and exhibited potential for future cloud based radiotherapy.« less

A contrast between DEMATEL-ANP and ANP methods for six sigma project selection: a case study in healthcare industry.

PubMed

Ortíz, Miguel A; Felizzola, Heriberto A; Nieto Isaza, Santiago

2015-01-01

The project selection process is a crucial step for healthcare organizations at the moment of implementing six sigma programs in both administrative and caring processes. However, six-sigma project selection is often defined as a decision making process with interaction and feedback between criteria; so that it is necessary to explore different methods to help healthcare companies to determine the Six-sigma projects that provide the maximum benefits. This paper describes the application of both ANP (Analytic Network process) and DEMATEL (Decision Making trial and evaluation laboratory)-ANP in a public medical centre to establish the most suitable six sigma project and finally, these methods were compared to evaluate their performance in the decision making process. ANP and DEMATEL-ANP were used to evaluate 6 six sigma project alternatives under an evaluation model composed by 3 strategies, 4 criteria and 15 sub-criteria. Judgement matrixes were completed by the six sigma team whose participants worked in different departments of the medical centre. The improving of care opportunity in obstetric outpatients was elected as the most suitable six sigma project with a score of 0,117 as contribution to the organization goals. DEMATEL-ANP performed better at decision making process since it reduced the error probability due to interactions and feedback. ANP and DEMATEL-ANP effectively supported six sigma project selection processes, helping to create a complete framework that guarantees the prioritization of projects that provide maximum benefits to healthcare organizations. As DEMATEL- ANP performed better, it should be used by practitioners involved in decisions related to the implementation of six sigma programs in healthcare sector accompanied by the adequate identification of the evaluation criteria that support the decision making model. Thus, this comparative study contributes to choosing more effective approaches in this field. Suggestions of further work are also proposed so that these methods can be applied more adequate in six sigma project selection processes in healthcare.

A contrast between DEMATEL-ANP and ANP methods for six sigma project selection: a case study in healthcare industry

PubMed Central

2015-01-01

Background The project selection process is a crucial step for healthcare organizations at the moment of implementing six sigma programs in both administrative and caring processes. However, six-sigma project selection is often defined as a decision making process with interaction and feedback between criteria; so that it is necessary to explore different methods to help healthcare companies to determine the Six-sigma projects that provide the maximum benefits. This paper describes the application of both ANP (Analytic Network process) and DEMATEL (Decision Making trial and evaluation laboratory)-ANP in a public medical centre to establish the most suitable six sigma project and finally, these methods were compared to evaluate their performance in the decision making process. Methods ANP and DEMATEL-ANP were used to evaluate 6 six sigma project alternatives under an evaluation model composed by 3 strategies, 4 criteria and 15 sub-criteria. Judgement matrixes were completed by the six sigma team whose participants worked in different departments of the medical centre. Results The improving of care opportunity in obstetric outpatients was elected as the most suitable six sigma project with a score of 0,117 as contribution to the organization goals. DEMATEL-ANP performed better at decision making process since it reduced the error probability due to interactions and feedback. Conclusions ANP and DEMATEL-ANP effectively supported six sigma project selection processes, helping to create a complete framework that guarantees the prioritization of projects that provide maximum benefits to healthcare organizations. As DEMATEL- ANP performed better, it should be used by practitioners involved in decisions related to the implementation of six sigma programs in healthcare sector accompanied by the adequate identification of the evaluation criteria that support the decision making model. Thus, this comparative study contributes to choosing more effective approaches in this field. Suggestions of further work are also proposed so that these methods can be applied more adequate in six sigma project selection processes in healthcare. PMID:26391445

Application of agent-based system for bioprocess description and process improvement.

PubMed

Gao, Ying; Kipling, Katie; Glassey, Jarka; Willis, Mark; Montague, Gary; Zhou, Yuhong; Titchener-Hooker, Nigel J

2010-01-01

Modeling plays an important role in bioprocess development for design and scale-up. Predictive models can also be used in biopharmaceutical manufacturing to assist decision-making either to maintain process consistency or to identify optimal operating conditions. To predict the whole bioprocess performance, the strong interactions present in a processing sequence must be adequately modeled. Traditionally, bioprocess modeling considers process units separately, which makes it difficult to capture the interactions between units. In this work, a systematic framework is developed to analyze the bioprocesses based on a whole process understanding and considering the interactions between process operations. An agent-based approach is adopted to provide a flexible infrastructure for the necessary integration of process models. This enables the prediction of overall process behavior, which can then be applied during process development or once manufacturing has commenced, in both cases leading to the capacity for fast evaluation of process improvement options. The multi-agent system comprises a process knowledge base, process models, and a group of functional agents. In this system, agent components co-operate with each other in performing their tasks. These include the description of the whole process behavior, evaluating process operating conditions, monitoring of the operating processes, predicting critical process performance, and providing guidance to decision-making when coping with process deviations. During process development, the system can be used to evaluate the design space for process operation. During manufacture, the system can be applied to identify abnormal process operation events and then to provide suggestions as to how best to cope with the deviations. In all cases, the function of the system is to ensure an efficient manufacturing process. The implementation of the agent-based approach is illustrated via selected application scenarios, which demonstrate how such a framework may enable the better integration of process operations by providing a plant-wide process description to facilitate process improvement. Copyright 2009 American Institute of Chemical Engineers

Evaluation of the Effects of AFFF Inputs on the VIP Biological Nutrient Removal Process and Pass-Through Toxicity. Phase 1A. Volume I.

DTIC Science & Technology

1997-10-01

This report discusses the results of a bench scale study conducted to evaluate the potential inhibitory effects of untreated AFFF wastewater to the...untreated AFFF wastewater to the nitrification process of the Virginia Initiative Plant biological nutrient removal system. Under this testing, bench...scale reactors simulating the nitrification process were loaded at various AFFF concentrations and the influence on the process performance was

Student Evaluation of Teaching: Keeping in Touch with Reality

ERIC Educational Resources Information Center

Palmer, Stuart

2012-01-01

Student evaluation of teaching is commonplace in many universities and may be the predominant input into the performance evaluation of staff and organisational units. This article used publicly available student evaluation of teaching data to present examples of where institutional responses to evaluation processes appeared to be educationally…

Developing and Implementing a Counselor Evaluation Program.

ERIC Educational Resources Information Center

Bell, Priscilla J.; Acker, Kathleen E.

In the past several years, Tacoma Community College (TCC) has devoted increasing attention to evaluating faculty and staff performance. In recognition of the benefits of a growth-oriented evaluation process over a summative evaluation, the counselors and the Dean for Student Services at TCC developed a comprehensive evaluation system for…

Evolution of Multidisciplinary Translational Teams (MTTs): Insights for Accelerating Translational Innovations

PubMed Central

Calhoun, William J.; Bhavnani, Suresh; Rose, Robert M.; Ameredes, Bill; Brasier, Allan R.

2015-01-01

Abstract There is growing consensus about the factors critical for development and productivity of multidisciplinary teams, but few studies have evaluated their longitudinal changes. We present a longitudinal study of 10 multidisciplinary translational teams (MTTs), based on team process and outcome measures, evaluated before and after 3 years of CTSA collaboration. Using a mixed methods approach, an expert panel of five judges (familiar with the progress of the teams) independently rated team performance based on four process and four outcome measures, and achieved a rating consensus. Although all teams made progress in translational domains, other process and outcome measures were highly variable. The trajectory profiles identified four categories of team performance. Objective bibliometric analysis of CTSA‐supported MTTs with positive growth in process scores showed that these teams tended to have enhanced scientific outcomes and published in new scientific domains, indicating the conduct of innovative science. Case exemplars revealed that MTTs that experienced growth in both process and outcome evaluative criteria also experienced greater innovation, defined as publications in different areas of science. Of the eight evaluative criteria, leadership‐related behaviors were the most resistant to the interventions introduced. Well‐managed MTTs demonstrate objective productivity and facilitate innovation. PMID:25801998

Evolution of Multidisciplinary Translational Teams (MTTs): Insights for Accelerating Translational Innovations.

PubMed

Wooten, Kevin C; Calhoun, William J; Bhavnani, Suresh; Rose, Robert M; Ameredes, Bill; Brasier, Allan R

2015-10-01

There is growing consensus about the factors critical for development and productivity of multidisciplinary teams, but few studies have evaluated their longitudinal changes. We present a longitudinal study of 10 multidisciplinary translational teams (MTTs), based on team process and outcome measures, evaluated before and after 3 years of CTSA collaboration. Using a mixed methods approach, an expert panel of five judges (familiar with the progress of the teams) independently rated team performance based on four process and four outcome measures, and achieved a rating consensus. Although all teams made progress in translational domains, other process and outcome measures were highly variable. The trajectory profiles identified four categories of team performance. Objective bibliometric analysis of CTSA-supported MTTs with positive growth in process scores showed that these teams tended to have enhanced scientific outcomes and published in new scientific domains, indicating the conduct of innovative science. Case exemplars revealed that MTTs that experienced growth in both process and outcome evaluative criteria also experienced greater innovation, defined as publications in different areas of science. Of the eight evaluative criteria, leadership-related behaviors were the most resistant to the interventions introduced. Well-managed MTTs demonstrate objective productivity and facilitate innovation. © 2015 Wiley Periodicals, Inc.

Grazing Incidence Wavefront Sensing and Verification of X-Ray Optics Performance

NASA Technical Reports Server (NTRS)

Saha, Timo T.; Rohrbach, Scott; Zhang, William W.

2011-01-01

Evaluation of interferometrically measured mirror metrology data and characterization of a telescope wavefront can be powerful tools in understanding of image characteristics of an x-ray optical system. In the development of soft x-ray telescope for the International X-Ray Observatory (IXO), we have developed new approaches to support the telescope development process. Interferometrically measuring the optical components over all relevant spatial frequencies can be used to evaluate and predict the performance of an x-ray telescope. Typically, the mirrors are measured using a mount that minimizes the mount and gravity induced errors. In the assembly and mounting process the shape of the mirror segments can dramatically change. We have developed wavefront sensing techniques suitable for the x-ray optical components to aid us in the characterization and evaluation of these changes. Hartmann sensing of a telescope and its components is a simple method that can be used to evaluate low order mirror surface errors and alignment errors. Phase retrieval techniques can also be used to assess and estimate the low order axial errors of the primary and secondary mirror segments. In this paper we describe the mathematical foundation of our Hartmann and phase retrieval sensing techniques. We show how these techniques can be used in the evaluation and performance prediction process of x-ray telescopes.

Applying an Appreciative Inquiry Process to a Course Evaluation in Higher Education

ERIC Educational Resources Information Center

Kung, Susie; Giles, David; Hagan, Bill

2013-01-01

While appreciative inquiry (AI) has its origins in organizational development, this article considers the application of AI within a course evaluation in higher education. An AI process was deemed appropriate given its concern for peak performance or life-centric experiences. Former students of a particular course, along with current students,…

Process evaluation to explore internal and external validity of the "Act in Case of Depression" care program in nursing homes.

PubMed

Leontjevas, Ruslan; Gerritsen, Debby L; Koopmans, Raymond T C M; Smalbrugge, Martin; Vernooij-Dassen, Myrra J F J

2012-06-01

A multidisciplinary, evidence-based care program to improve the management of depression in nursing home residents was implemented and tested using a stepped-wedge design in 23 nursing homes (NHs): "Act in case of Depression" (AiD). Before effect analyses, to evaluate AiD process data on sampling quality (recruitment and randomization, reach) and intervention quality (relevance and feasibility, extent to which AiD was performed), which can be used for understanding internal and external validity. In this article, a model is presented that divides process evaluation data into first- and second-order process data. Qualitative and quantitative data based on personal files of residents, interviews of nursing home professionals, and a research database were analyzed according to the following process evaluation components: sampling quality and intervention quality. Nursing home. The pattern of residents' informed consent rates differed for dementia special care units and somatic units during the study. The nursing home staff was satisfied with the AiD program and reported that the program was feasible and relevant. With the exception of the first screening step (nursing staff members using a short observer-based depression scale), AiD components were not performed fully by NH staff as prescribed in the AiD protocol. Although NH staff found the program relevant and feasible and was satisfied with the program content, individual AiD components may have different feasibility. The results on sampling quality implied that statistical analyses of AiD effectiveness should account for the type of unit, whereas the findings on intervention quality implied that, next to the type of unit, analyses should account for the extent to which individual AiD program components were performed. In general, our first-order process data evaluation confirmed internal and external validity of the AiD trial, and this evaluation enabled further statistical fine tuning. The importance of evaluating the first-order process data before executing statistical effect analyses is thus underlined. Copyright © 2012 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.

Evaluating Web accessibility at different processing phases

NASA Astrophysics Data System (ADS)

Fernandes, N.; Lopes, R.; Carriço, L.

2012-09-01

Modern Web sites use several techniques (e.g. DOM manipulation) that allow for the injection of new content into their Web pages (e.g. AJAX), as well as manipulation of the HTML DOM tree. This has the consequence that the Web pages that are presented to users (i.e. after browser processing) are different from the original structure and content that is transmitted through HTTP communication (i.e. after browser processing). This poses a series of challenges for Web accessibility evaluation, especially on automated evaluation software. This article details an experimental study designed to understand the differences posed by accessibility evaluation after Web browser processing. We implemented a Javascript-based evaluator, QualWeb, that can perform WCAG 2.0 based accessibility evaluations in the two phases of browser processing. Our study shows that, in fact, there are considerable differences between the HTML DOM trees in both phases, which have the consequence of having distinct evaluation results. We discuss the impact of these results in the light of the potential problems that these differences can pose to designers and developers that use accessibility evaluators that function before browser processing.

Evaluating transient performance of servo mechanisms by analysing stator current of PMSM

NASA Astrophysics Data System (ADS)

Zhang, Qing; Tan, Luyao; Xu, Guanghua

2018-02-01

Smooth running and rapid response are the desired performance goals for the transient motions of servo mechanisms. Because of the uncertain and unobservable transient behaviour of servo mechanisms, it is difficult to evaluate their transient performance. Under the effects of electromechanical coupling, the stator current signals of a permanent-magnet synchronous motor (PMSM) potentially contain the performance information regarding servo mechanisms in use. In this paper, a novel method based on analysing the stator current of the PMSM is proposed for quantifying the transient performance. First, a vector control model is constructed to simulate the stator current behaviour in the transient processes of consecutive speed changes, consecutive load changes, and intermittent start-stops. It is discovered that the amplitude and frequency of the stator current are modulated by the transient load torque and motor speed, respectively. The stator currents under different performance conditions are also simulated and compared. Then, the stator current is processed using a local means decomposition (LMD) algorithm to extract the instantaneous amplitude and instantaneous frequency. The sample entropy of the instantaneous amplitude, which reflects the complexity of the load torque variation, is calculated as a performance indicator of smooth running. The peak-to-peak value of the instantaneous frequency, which defines the range of the motor speed variation, is set as a performance indicator of rapid response. The proposed method is applied to both simulated data in an intermittent start-stops process and experimental data measured for a batch of servo turrets for turning lathes. The results show that the performance evaluations agree with the actual performance.

Evaluating Attitudes, Skill, and Performance in a Learning-Enhanced Quantitative Methods Course: A Structural Modeling Approach.

ERIC Educational Resources Information Center

Harlow, Lisa L.; Burkholder, Gary J.; Morrow, Jennifer A.

2002-01-01

Used a structural modeling approach to evaluate relations among attitudes, initial skills, and performance in a Quantitative Methods course that involved students in active learning. Results largely confirmed hypotheses offering support for educational reform efforts that propose actively involving students in the learning process, especially in…

Mobile Formative Assessment Tool Based on Data Mining Techniques for Supporting Web-Based Learning

ERIC Educational Resources Information Center

Chen, Chih-Ming; Chen, Ming-Chuan

2009-01-01

Current trends clearly indicate that online learning has become an important learning mode. However, no effective assessment mechanism for learning performance yet exists for e-learning systems. Learning performance assessment aims to evaluate what learners learned during the learning process. Traditional summative evaluation only considers final…

Administrators' Views on Teacher Evaluation: Examining Ontario's Teacher Performance Appraisal

ERIC Educational Resources Information Center

Maharaj, Sachin

2014-01-01

This study examines the views of administrators (i.e., principals and vice-principals) in Ontario, Canada, with regard to the province's Teacher Performance Appraisal process. A total of 178 responses were collected from a survey that examined five areas: 1) preparation and training; 2) classroom observations; 3) preparing the formal evaluation;…

A data-driven multiplicative fault diagnosis approach for automation processes.

PubMed

Hao, Haiyang; Zhang, Kai; Ding, Steven X; Chen, Zhiwen; Lei, Yaguo

2014-09-01

This paper presents a new data-driven method for diagnosing multiplicative key performance degradation in automation processes. Different from the well-established additive fault diagnosis approaches, the proposed method aims at identifying those low-level components which increase the variability of process variables and cause performance degradation. Based on process data, features of multiplicative fault are extracted. To identify the root cause, the impact of fault on each process variable is evaluated in the sense of contribution to performance degradation. Then, a numerical example is used to illustrate the functionalities of the method and Monte-Carlo simulation is performed to demonstrate the effectiveness from the statistical viewpoint. Finally, to show the practical applicability, a case study on the Tennessee Eastman process is presented. Copyright © 2013. Published by Elsevier Ltd.

Development and Use of a Goal Setting/Attainment Process Designed To Measure a Teacher's Ability To Engage in Professional Growth and Leadership Initiatives.

ERIC Educational Resources Information Center

Minix, Nancy; And Others

The process used to evaluate progress in identifying the goals to be used in evaluating teacher performance under the Kentucky Career Ladder Program is described. The process pertains to two areas of teacher development: (1) professional growth and development, and (2) professional leadership and initiative. A total of 1,650 individuals were asked…

Integrated Main Propulsion System Performance Reconstruction Process/Models

NASA Technical Reports Server (NTRS)

Lopez, Eduardo; Elliott, Katie; Snell, Steven; Evans, Michael

2013-01-01

The Integrated Main Propulsion System (MPS) Performance Reconstruction process provides the MPS post-flight data files needed for postflight reporting to the project integration management and key customers to verify flight performance. This process/model was used as the baseline for the currently ongoing Space Launch System (SLS) work. The process utilizes several methodologies, including multiple software programs, to model integrated propulsion system performance through space shuttle ascent. It is used to evaluate integrated propulsion systems, including propellant tanks, feed systems, rocket engine, and pressurization systems performance throughout ascent based on flight pressure and temperature data. The latest revision incorporates new methods based on main engine power balance model updates to model higher mixture ratio operation at lower engine power levels.

Evaluating building performance in healthcare facilities: an organizational perspective.

PubMed

Steinke, Claudia; Webster, Lynn; Fontaine, Marie

2010-01-01

Using the environment as a strategic tool is one of the most cost-effective and enduring approaches for improving public health; however, it is one that requires multiple perspectives. The purpose of this article is to highlight an innovative methodology that has been developed for conducting comprehensive performance evaluations in public sector health facilities in Canada. The building performance evaluation methodology described in this paper is a government initiative. The project team developed a comprehensive building evaluation process for all new capital health projects that would respond to the aforementioned need for stakeholders to be more accountable and to better integrate the larger organizational strategy of facilities. The Balanced Scorecard, which is a multiparadigmatic, performance-based business framework, serves as the underlying theoretical framework for this initiative. It was applied in the development of the conceptual model entitled the Building Performance Evaluation Scorecard, which provides the following benefits: (1) It illustrates a process to link facilities more effectively to the overall mission and goals of an organization; (2) It is both a measurement and a management system that has the ability to link regional facilities to measures of success and larger business goals; (3) It provides a standardized methodology that ensures consistency in assessing building performance; and (4) It is more comprehensive than traditional building evaluations. The methodology presented in this paper is both a measurement and management system that integrates the principles of evidence-based design with the practices of pre- and post-occupancy evaluation. It promotes accountability and continues throughout the life cycle of a project. The advantage of applying this framework is that it engages health organizations in clarifying a vision and strategy for their facilities and helps translate those strategies into action and measurable performance outcomes.

Thiokol/Wasatch installation evaluation of the redesigned field joint protection system (concepts 1 and 3)

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

The procedures, performance, and results obtained from the Thiokol Corporation/Wasatch Redesigned Field Joint Protection System (FJPS) Installation Evaluation are documented. The purpose of the evaluation was to demonstrate and develop the procedures required to install two different concepts (referred to as Concepts 1 and 3) of the redesigned FJPS. The processing capability of each configuration was then evaluated and compared. The FJPS is installed on redesigned solid rocket motors (RSRM) to protect the field joints from rain intrusion and to maintain the joint temperature sensor measurement between 85 and 122 F while the boosters are on the launch pad. The FJPS is being redesigned to reduce installation timelines at KSC and to simplify or eliminate installation processing problems related to the present design of an EPDM moisture seal/extruded cork combination. Several installation techniques were evaluated, and a preferred method of application was developed for each concept. The installations were performed with the test article in the vertical (flight) position. Comparative timelines between the two concepts were also developed. An additional evaluation of the Concept 3 configuration was performed with the test article in the horizontal position, to simulate an overhead installation on a technical evaluation motor (TEM).

Towards Systematic Benchmarking of Climate Model Performance

NASA Astrophysics Data System (ADS)

Gleckler, P. J.

2014-12-01

The process by which climate models are evaluated has evolved substantially over the past decade, with the Coupled Model Intercomparison Project (CMIP) serving as a centralizing activity for coordinating model experimentation and enabling research. Scientists with a broad spectrum of expertise have contributed to the CMIP model evaluation process, resulting in many hundreds of publications that have served as a key resource for the IPCC process. For several reasons, efforts are now underway to further systematize some aspects of the model evaluation process. First, some model evaluation can now be considered routine and should not require "re-inventing the wheel" or a journal publication simply to update results with newer models. Second, the benefit of CMIP research to model development has not been optimal because the publication of results generally takes several years and is usually not reproducible for benchmarking newer model versions. And third, there are now hundreds of model versions and many thousands of simulations, but there is no community-based mechanism for routinely monitoring model performance changes. An important change in the design of CMIP6 can help address these limitations. CMIP6 will include a small set standardized experiments as an ongoing exercise (CMIP "DECK": ongoing Diagnostic, Evaluation and Characterization of Klima), so that modeling groups can submit them at any time and not be overly constrained by deadlines. In this presentation, efforts to establish routine benchmarking of existing and future CMIP simulations will be described. To date, some benchmarking tools have been made available to all CMIP modeling groups to enable them to readily compare with CMIP5 simulations during the model development process. A natural extension of this effort is to make results from all CMIP simulations widely available, including the results from newer models as soon as the simulations become available for research. Making the results from routine performance tests readily accessible will help advance a more transparent model evaluation process.

Comprehensive evaluation of the long-term performance of rubberized pavement, phase I : laboratory study of rubberized asphalt mix performance.

DOT National Transportation Integrated Search

2012-12-01

Crumb rubber, made from scrap tires, has been introduced into the production of different types of hot : mix asphalt (HMA) in either a wet or dry process. In the wet process, the crumb rubber and binder are : completely mixed to form asphalt rubber (...

Development of Entry-Level Competence Tests: A Strategy for Evaluation of Vocational Education Training Systems

ERIC Educational Resources Information Center

Schutte, Marc; Spottl, Georg

2011-01-01

Developing countries such as Malaysia and Oman have recently established occupational standards based on core work processes (functional clusters of work objects, activities and performance requirements), to which competencies (performance determinants) can be linked. While the development of work-process-based occupational standards is supposed…

Recommendations and Improvements for the Evaluation of Integrated Community-Wide Interventions Approaches.

PubMed

van Koperen, Tessa M; Renders, Carry M; Spierings, Eline J M; Hendriks, Anna-Marie; Westerman, Marjan J; Seidell, Jacob C; Schuit, Albertine J

2016-01-01

Background . Integrated community-wide intervention approaches (ICIAs) are implemented to prevent childhood obesity. Programme evaluation improves these ICIAs, but professionals involved often struggle with performance. Evaluation tools have been developed to support Dutch professionals involved in ICIAs. It is unclear how useful these tools are to intended users. We therefore researched the facilitators of and barriers to ICIA programme evaluation as perceived by professionals and their experiences of the evaluation tools. Methods . Focus groups and interviews with 33 public health professionals. Data were analysed using a thematic content approach. Findings . Evaluation is hampered by insufficient time, budget, and experience with ICIAs, lack of leadership, and limited advocacy for evaluation. Epidemiologists are regarded as responsible for evaluation but feel incompetent to perform evaluation or advocate its need in a political environment. Managers did not prioritise process evaluations, involvement of stakeholders, and capacity building. The evaluation tools are perceived as valuable but too comprehensive considering limited resources. Conclusion . Evaluating ICIAs is important but most professionals are unfamiliar with it and management does not prioritise process evaluation nor incentivize professionals to evaluate. To optimise programme evaluation, more resources and coaching are required to improve professionals' evaluation capabilities and specifically the use of evaluation.

Recommendations and Improvements for the Evaluation of Integrated Community-Wide Interventions Approaches

PubMed Central

Spierings, Eline J. M.; Westerman, Marjan J.; Seidell, Jacob C.; Schuit, Albertine J.

2016-01-01

Background. Integrated community-wide intervention approaches (ICIAs) are implemented to prevent childhood obesity. Programme evaluation improves these ICIAs, but professionals involved often struggle with performance. Evaluation tools have been developed to support Dutch professionals involved in ICIAs. It is unclear how useful these tools are to intended users. We therefore researched the facilitators of and barriers to ICIA programme evaluation as perceived by professionals and their experiences of the evaluation tools. Methods. Focus groups and interviews with 33 public health professionals. Data were analysed using a thematic content approach. Findings. Evaluation is hampered by insufficient time, budget, and experience with ICIAs, lack of leadership, and limited advocacy for evaluation. Epidemiologists are regarded as responsible for evaluation but feel incompetent to perform evaluation or advocate its need in a political environment. Managers did not prioritise process evaluations, involvement of stakeholders, and capacity building. The evaluation tools are perceived as valuable but too comprehensive considering limited resources. Conclusion. Evaluating ICIAs is important but most professionals are unfamiliar with it and management does not prioritise process evaluation nor incentivize professionals to evaluate. To optimise programme evaluation, more resources and coaching are required to improve professionals' evaluation capabilities and specifically the use of evaluation. PMID:28116149

Evaluation of participatory planning: Lessons from Hungarian Natura 2000 management planning processes.

PubMed

Kovács, Eszter; Kelemen, Eszter; Kiss, Gabriella; Kalóczkai, Ágnes; Fabók, Veronika; Mihók, Barbara; Megyesi, Boldizsár; Pataki, György; Bodorkós, Barbara; Balázs, Bálint; Bela, Györgyi; Margóczi, Katalin; Roboz, Ágnes; Molnár, Dániel

2017-12-15

Stakeholder participation in nature conservation policies and especially in the management of protected areas has gained importance in the last decades. These changes are underlined by democratic principles and the perceived contribution of stakeholder involvement to the effectiveness of conservation management. Evaluating participatory processes is essential to learn about the past and thus increase the quality of future processes. The evaluation can be useful for the organisations responsible for planning and management, stakeholders and policy makers as well. The present paper shows the results of a systematic evaluation of 25 participatory processes related to the development of management plans for Natura 2000 sites in Hungary between 2007 and 2015. A conceptual framework was developed to evaluate the process and outcome of participatory management planning processes. Criteria were based on the scientific literature on public participation and tailored to conservation-related management planning and stakeholder involvement. Evaluated processes were grouped in three cases based on their time range and financial sources. Overall, the analysed processes scored at a medium level, showing better performance in the process criteria than in the outcome criteria. The best case scored significantly higher in four criteria compared to the other cases: representativeness, resource availability for facilitation, new, creative ideas and impact on the plan. The main factors behind the success were (1) embeddedness of the planning process in a larger project, where the plan was a tool for conservation, (2) carrying out only one process at a time, (3) previous experience of facilitators and planners with participatory planning and (4) the opportunity and capacity to propose a payment scheme as an incentive. But even this case received low scores in some criteria: conflict resolution, early involvement and well defined goals. Based on the results we suggest that more data is needed to evaluate the implementation of the plans and, in many cases, the impact of the process on the plan. Performance can be improved with the assistance of policy makers by further developing guidelines, harmonising payment schemes with the conservation measures of the plans and providing training on conflict resolution. The evaluation framework proved to be suitable for the assessment of a large set of conservation related management planning processes, but it also had some limitations, e.g. concerning the incorporation of stakeholders' views in the evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Further Investigations of Content Analytic Techniques for Extracting the Differentiating Information Contained in the Narrative Sections of Performance Evaluations for Navy Enlisted Personnel. Technical Report No. 75-1.

ERIC Educational Resources Information Center

Ramsey-Klee, Diane M.; Richman, Vivian

The purpose of this research is to develop content analytic techniques capable of extracting the differentiating information in narrative performance evaluations for enlisted personnel in order to aid in the process of selecting personnel for advancement, duty assignment, training, or quality retention. Four tasks were performed. The first task…

Modeling Driving Performance Using In-Vehicle Speech Data From a Naturalistic Driving Study.

PubMed

Kuo, Jonny; Charlton, Judith L; Koppel, Sjaan; Rudin-Brown, Christina M; Cross, Suzanne

2016-09-01

We aimed to (a) describe the development and application of an automated approach for processing in-vehicle speech data from a naturalistic driving study (NDS), (b) examine the influence of child passenger presence on driving performance, and (c) model this relationship using in-vehicle speech data. Parent drivers frequently engage in child-related secondary behaviors, but the impact on driving performance is unknown. Applying automated speech-processing techniques to NDS audio data would facilitate the analysis of in-vehicle driver-child interactions and their influence on driving performance. Speech activity detection and speaker diarization algorithms were applied to audio data from a Melbourne-based NDS involving 42 families. Multilevel models were developed to evaluate the effect of speech activity and the presence of child passengers on driving performance. Speech activity was significantly associated with velocity and steering angle variability. Child passenger presence alone was not associated with changes in driving performance. However, speech activity in the presence of two child passengers was associated with the most variability in driving performance. The effects of in-vehicle speech on driving performance in the presence of child passengers appear to be heterogeneous, and multiple factors may need to be considered in evaluating their impact. This goal can potentially be achieved within large-scale NDS through the automated processing of observational data, including speech. Speech-processing algorithms enable new perspectives on driving performance to be gained from existing NDS data, and variables that were once labor-intensive to process can be readily utilized in future research. © 2016, Human Factors and Ergonomics Society.

On the Performance Evaluation of 3D Reconstruction Techniques from a Sequence of Images

NASA Astrophysics Data System (ADS)

Eid, Ahmed; Farag, Aly

2005-12-01

The performance evaluation of 3D reconstruction techniques is not a simple problem to solve. This is not only due to the increased dimensionality of the problem but also due to the lack of standardized and widely accepted testing methodologies. This paper presents a unified framework for the performance evaluation of different 3D reconstruction techniques. This framework includes a general problem formalization, different measuring criteria, and a classification method as a first step in standardizing the evaluation process. Performance characterization of two standard 3D reconstruction techniques, stereo and space carving, is also presented. The evaluation is performed on the same data set using an image reprojection testing methodology to reduce the dimensionality of the evaluation domain. Also, different measuring strategies are presented and applied to the stereo and space carving techniques. These measuring strategies have shown consistent results in quantifying the performance of these techniques. Additional experiments are performed on the space carving technique to study the effect of the number of input images and the camera pose on its performance.

Operator performance evaluation using multi criteria decision making methods

NASA Astrophysics Data System (ADS)

Rani, Ruzanita Mat; Ismail, Wan Rosmanira; Razali, Siti Fatihah

2014-06-01

Operator performance evaluation is a very important operation in labor-intensive manufacturing industry because the company's productivity depends on the performance of its operators. The aims of operator performance evaluation are to give feedback to operators on their performance, to increase company's productivity and to identify strengths and weaknesses of each operator. In this paper, six multi criteria decision making methods; Analytical Hierarchy Process (AHP), fuzzy AHP (FAHP), ELECTRE, PROMETHEE II, Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) are used to evaluate the operators' performance and to rank the operators. The performance evaluation is based on six main criteria; competency, experience and skill, teamwork and time punctuality, personal characteristics, capability and outcome. The study was conducted at one of the SME food manufacturing companies in Selangor. From the study, it is found that AHP and FAHP yielded the "outcome" criteria as the most important criteria. The results of operator performance evaluation showed that the same operator is ranked the first using all six methods.

The state of the art in evaluating the performance of assistant and associate deans as seen by deans and assistant and associate deans.

PubMed

Dunning, David G; Durham, Timothy M; Aksu, Mert N; Lange, Brian M

2008-04-01

This study explores the little-understood process of evaluating the performance of assistant and associate deans at dental colleges in the United States and Canada. Specifically, this research aimed to identify the methods, processes, and outcomes related to the performance appraisals of assistant/associate deans. Both deans and assistant/associate deans were surveyed. Forty-four of sixty-six deans (66.7 percent) and 227 of 315 assistant/associate deans (72.1 percent) completed surveys with both close-ended and open-ended questions. In addition, ten individuals from each group were interviewed. Results indicate that 75-89 percent of assistant/associate deans are formally evaluated, although as many as 27 percent may lack formal job descriptions. Some recommended best practices for performance appraisal are being used in a majority of colleges. Examples of these best practices are having at least yearly appraisals, holding face-to-face meetings, and setting specific, personal performance objectives/benchmarks for assistant/associate deans. Still, there is much room to improve appraisals by incorporating other recommended practices. Relatively high levels of overall satisfaction were reported by both assistant/associate deans and deans for the process and outcomes of appraisals. Assistant/associate deans rated the value of appraisals to overall development lower than did deans. Qualitative data revealed definite opinions about what constitutes effective and ineffective appraisals, including the use of goal-setting, timeliness, and necessary commitment. Several critical issues related to the results are discussed: differences in perspectives on performance reviews, the importance of informal feedback and job descriptions, the influence of an assistant/associate deans' lack of tenure, and the length of service of deans. Lastly, recommendations for enhancing performance evaluations are offered.

Evaluation Program on the Implementation of Industrial Apprenticeship (Prakerin) in Electrical Engineering

NASA Astrophysics Data System (ADS)

Maulana, I.; Sumarto; Nurafiati, P.; Puspita, R. H.

2018-02-01

This research aims to find out the evaluation program of the Industrial apprenticeship (Prakerin) in electrical engineering. This research includes on four variables of CIPP. (1). Context (a). programme planning (b). design. (2). Input (a). readiness of students (b). performance of vocational education teachers (c). Facilities and infrastructure, (3). process (a). performance students (b). performance mentors, (4). Product (a). readiness of student work. This research is a type of program evaluation research with Stake model approach. Data collection methods used are questionnaires with closed questions and frequently asked questions.

A critique of assumptions about selecting chemical-resistant gloves: a case for workplace evaluation of glove efficacy.

PubMed

Klingner, Thomas D; Boeniger, Mark F

2002-05-01

Wearing chemical-resistant gloves and clothing is the primary method used to prevent skin exposure to toxic chemicals in the workplace. The process for selecting gloves is usually based on manufacturers' laboratory-generated chemical permeation data. However, such data may not reflect conditions in the workplace where many variables are encountered (e.g., elevated temperature, flexing, pressure, and product variation between suppliers). Thus, the reliance on this selection process is questionable. Variables that may influence the performance of chemical-resistant gloves are identified and discussed. Passive dermal monitoring is recommended to evaluate glove performance under actual-use conditions and can bridge the gap between laboratory data and real-world performance.

Evaluation of an Atmosphere Revitalization Subsystem for Deep Space Exploration Missions

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Abney, Morgan B.; Conrad, Ruth E.; Frederick, Kenneth R.; Greenwood, Zachary W.; Kayatin, Matthew J.; Knox, James C.; Newton, Robert L.; Parrish, Keith J.; Takada, Kevin C.;

Bench-Scale Development of a Non-Aqueous Solvent (NAS) CO2 Capture Process for Coal-Fired Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lail, Marty

The project aimed to advance RTI’s non-aqueous amine solvent technology by improving the solvent to reduce volatility, demonstrating long-term continuous operation at lab- (0.5 liters solvent) and bench-scale (~120 liters solvent), showing low reboiler heat duty measured during bench-scale testing, evaluating degradation products, building a rate-based process model, and evaluating the techno-economic performance of the process. The project team (RTI, SINTEF, Linde Engineering) and the technology performed well in each area of advancement. The modifications incorporated throughout the project enabled the attainment of target absorber and regenerator conditions for the process. Reboiler duties below 2,000 kJt/kg CO2 were observed inmore » a bench-scale test unit operated at RTI.« less

Information Processing Differences and Similarities in Adults with Dyslexia and Adults with Attention Deficit Hyperactivity Disorder during a Continuous Performance Test: A Study of Cortical Potentials

ERIC Educational Resources Information Center

Dhar, Monica; Been, Pieter H.; Minderaa, Ruud B.; Althaus, Monika

2010-01-01

Twenty male adults with ADHD, 16 dyslexic adults, 15 comorbid adults, and 16 normal controls were compared on performance and underlying brain responses, during a cued Continuous Performance Test (O-X CPT), with the aim of discovering features of information processing differentiating between the groups. The study evaluated both cue- and…

Performance study of a data flow architecture

NASA Technical Reports Server (NTRS)

Adams, George

1985-01-01

Teams of scientists studied data flow concepts, static data flow machine architecture, and the VAL language. Each team mapped its application onto the machine and coded it in VAL. The principal findings of the study were: (1) Five of the seven applications used the full power of the target machine. The galactic simulation and multigrid fluid flow teams found that a significantly smaller version of the machine (16 processing elements) would suffice. (2) A number of machine design parameters including processing element (PE) function unit numbers, array memory size and bandwidth, and routing network capability were found to be crucial for optimal machine performance. (3) The study participants readily acquired VAL programming skills. (4) Participants learned that application-based performance evaluation is a sound method of evaluating new computer architectures, even those that are not fully specified. During the course of the study, participants developed models for using computers to solve numerical problems and for evaluating new architectures. These models form the bases for future evaluation studies.

Performance evaluation methodology for historical document image binarization.

PubMed

Ntirogiannis, Konstantinos; Gatos, Basilis; Pratikakis, Ioannis

2013-02-01

Document image binarization is of great importance in the document image analysis and recognition pipeline since it affects further stages of the recognition process. The evaluation of a binarization method aids in studying its algorithmic behavior, as well as verifying its effectiveness, by providing qualitative and quantitative indication of its performance. This paper addresses a pixel-based binarization evaluation methodology for historical handwritten/machine-printed document images. In the proposed evaluation scheme, the recall and precision evaluation measures are properly modified using a weighting scheme that diminishes any potential evaluation bias. Additional performance metrics of the proposed evaluation scheme consist of the percentage rates of broken and missed text, false alarms, background noise, character enlargement, and merging. Several experiments conducted in comparison with other pixel-based evaluation measures demonstrate the validity of the proposed evaluation scheme.

Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

PubMed Central

Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

2015-01-01

Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

[Situational diagnostic of an evaluation process of professional perfomance].

PubMed

Gonçalves, Vera Lúcia Mira; Leite, Maria Madalena Januário

2004-01-01

The aim of this study was to realize a diagnostic situational about the evaluation process of the nursing team performance of USP Hospital. Based in two guiding questions, it was carried out 9 interviews with nurses of this hospital. These interviews were analyzed according Analyze of Contend. The most frequent themes were: The meaning of evaluation; the feelings; the difficulties and facilities concerning the instrument and the capacitacion. This experience brought about many feelings, as well as aspects that either favor or make the execution of the evaluation difficult, showing the principal points of vulnerability of the process and, therefore, deserving better attention and short-term intervention.

[Assessment of decontamination processes: cleaning, disinfection and sterilization in dental practice in Poland in the years 2011-2012].

PubMed

Röhm-Rodowald, Ewa; Jakimiak, Bozenna; Chojecka, Agnieszka; Zmuda-Baranowska, Magdalena; Kanclerski, Krzysztof

2012-01-01

Effective decontamination of instruments is a key element of infection control and the provision of high quality in dental care. The aim of the study was to evaluate the efficiency of decontamination procedures including cleaning, disinfection and sterilization of re-usable instruments in dental practices in Poland. The efficiency of disinfection and sterilization processes have been evaluated on the results of the questionnaires. The following information were taken into account: setting where disinfection and sterilization had been performed, preparation of dental equipment for sterilization (disinfection, washing and cleaning, packaging), the types of autoclaves and used types of sterilization cycles, routine monitoring and documentation of sterilization processes, treatment of handpieces and the frequency of surface decontamination. Data were collected from 43 dental practices (35 dental offices and 8 clinics). Disinfection and cleaning processes were performed manually in 63% of dental offices and ultrasonic baths were used in 53% of settings. Washer disinfectors were used in 23% of dental practices: in every researched clinic and in a few dental offices. All sterilization processes were performed in steam autoclaves, mainly in small steam sterilizers (81%). Dental handpieces were sterilized in 72% of practices, but only 33% of them performed sterilization in recommended cycle B. Sterilization processes were monitored with chemical indicators in 33% of practices. Biological monitoring of the processes was carried out at different intervals. Incorrect documentation of instruments and surfaces decontamination was recorded in several settings. There is still a need for improvement of decontamination processes in dental practice in Poland. Areas for improvement include: replacement of manual cleaning and disinfection processes with automatic processes, sterilization of dental handpieces after each patient, monitoring of a sterilization process with chemical and biological indicators. Reported incorrect procedures in decontamination of medical devices performed by questioned dentists and lack or inadequate response to asked questions indicate the lack of adequate knowledge about decontamination. Personnel who performs decontamination processes should be continuously trained.

48 CFR 42.1503 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the Past Performance Information Retrieval System (PPIRS) at www.ppirs.gov. The process for submitting... CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Performance Information 42.1503 Procedures. (a.... Those individuals identified may obtain information for the evaluation of performance from the program...

48 CFR 42.1503 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the Past Performance Information Retrieval System (PPIRS) at www.ppirs.gov. The process for submitting... CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Performance Information 42.1503 Procedures. (a.... Those individuals identified may obtain information for the evaluation of performance from the program...

Motivational Implications of Faculty Performance Standards

ERIC Educational Resources Information Center

Hardre, Patricia L.; Kollmann, Sherry L.

2012-01-01

Expectations and how they are communicated influence employees' motivation, effort, goals, efficacy and performance. This study examined faculty performance evaluation standards and processes of 60 academic departments in research universities for motivationally relevant elements. Characteristics were systematically analysed to understand their…

Performance criteria and quality indicators for the post-analytical phase.

PubMed

Sciacovelli, Laura; Aita, Ada; Padoan, Andrea; Pelloso, Michela; Antonelli, Giorgia; Piva, Elisa; Chiozza, Maria Laura; Plebani, Mario

2016-07-01

Quality indicators (QIs) used as performance measurements are an effective tool in accurately estimating quality, identifying problems that may need to be addressed, and monitoring the processes over time. In Laboratory Medicine, QIs should cover all steps of the testing process, as error studies have confirmed that most errors occur in the pre- and post-analytical phase of testing. Aim of the present study is to provide preliminary results on QIs and related performance criteria in the post-analytical phase. This work was conducted according to a previously described study design based on the voluntary participation of clinical laboratories in the project on QIs of the Working Group "Laboratory Errors and Patient Safety" (WG-LEPS) of the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC). Overall, data collected highlighted an improvement or stability in performances over time for all reported indicators thus demonstrating that the use of QIs is effective in the quality improvement strategy. Moreover, QIs data are an important source for defining the state-of-the-art concerning the error rate in the total testing process. The definition of performance specifications based on the state-of-the-art, as suggested by consensus documents, is a valuable benchmark point in evaluating the performance of each laboratory. Laboratory tests play a relevant role in the monitoring and evaluation of the efficacy of patient outcome thus assisting clinicians in decision-making. Laboratory performance evaluation is therefore crucial to providing patients with safe, effective and efficient care.

Could Students' Evaluation Be a Pleasant and Effective Process?

ERIC Educational Resources Information Center

Kapachtsi, Venetia; Pantelidi, Ioanna; Stamidou, Markia

2016-01-01

The evaluation of students' performance is one of the most important issues of educational reality. ?t strongly attracts the interest of all involved in the process of education: teachers, students, parents and the state as well. This study, is trying to find out, if using the project method, the teacher can assess effectively students, in a…

Preliminary evaluation of feeder and lint slide moisture addition on ginning, fiber quality, and textile processing of western cotton

USDA-ARS?s Scientific Manuscript database

The objective of this study was to evaluate the effects of moisture addition at the gin stand feeder conditioning hopper and/or the battery condenser slide on gin performance and Western cotton fiber quality and textile processing. The test treatments included no moisture addition, feeder hopper hum...

The Vanderbilt Professional Nursing Practice Program, part 3: managing an advancement process.

PubMed

Steaban, Robin; Fudge, Mitzie; Leutgens, Wendy; Wells, Nancy

2003-11-01

Consistency of performance standards across multiple clinical settings is an essential component of a credible advancement system. Our advancement process incorporates a central committee, composed of nurses from all clinical settings within the institution, to ensure consistency of performance in inpatient, outpatient, and procedural settings. An analysis of nurses advanced during the first 18 months of the program indicates that performance standards are applicable to nurses in all clinical settings. The first article (September 2003) in this 3-part series described the foundation for and the philosophical background of the Vanderbilt Professional Nursing Practice Program (VPNPP), the career advancement program underway at Vanderbilt University Medical Center. Part 2 described the development of the evaluation tools used in the VPNPP, the implementation and management of this new system, program evaluation, and improvements since the program's inception. The purpose of this article is to review the advancement process, review the roles of those involved in the process, and to describe outcomes and lessons learned.

Evaluation as a critical factor of success in local public health accreditation programs.

PubMed

Tremain, Beverly; Davis, Mary; Joly, Brenda; Edgar, Mark; Kushion, Mary L; Schmidt, Rita

2007-01-01

This article presents the variety of approaches used to conduct evaluations of performance improvement or accreditation systems, while illustrating the complexity of conducting evaluations to inform local public health practice. We, in addition, hope to inform the Exploring Accreditation Program about relevant experiences involving accreditation and performance assessment processes, specifically evaluation, as it debates and discusses a national voluntary model. A background of each state is given. To further explore these issues, interviews were conducted with each state's evaluator to gain more in-depth information on the many different evaluation strategies and approaches used. On the basis of the interviews, the authors provide several overall themes, which suggest that evaluation is a critical tool and success factor for performance assessment or accreditation programs.

Development and Evaluation of Video Systems for Performance Testing and Student Monitoring. Final Report.

ERIC Educational Resources Information Center

Hayes, John; Pulliam, Robert

A video performance monitoring system was developed by the URS/Matrix Company, under contract to the USAF Human Resources Laboratory and was evaluated experimentally in three technical training settings. Using input from 1 to 8 video cameras, the system provided a flexible combination of signal processing, direct monitor, recording and replay…

Enfranchising the Profession through Evaluation: A Story from Australia

ERIC Educational Resources Information Center

Clinton, Janet; Dawson, Georgia

2018-01-01

Educational reform in Australia recognizes the need for an effective teacher evaluation system but has fallen short of actually prescribing one. Current practice does not align to policy intent, with teacher evaluation largely an exercise in compliance around performance management as opposed to a process that promotes evaluative thinking,…

Evaluation Processes Used to Assess the Effectiveness of Vocational-Technical Programs.

ERIC Educational Resources Information Center

Bruhns, Arthur E.

Evaluation is quantitative or qualitative, the criteria determined by or given to the student. The criteria show how close he has come to the program's objectives and the ranking of individual performance. Vocational education programs susceptible to evaluation are listed and relevant evaluative techniques discussed. Graduate interviews concerning…

Evaluating stakeholder management performance using a stakeholder report card: the next step in theory and practice.

PubMed

Malvey, Donna; Fottler, Myron D; Slovensky, Donna J

2002-01-01

In the highly competitive health care environment, the survival of an organization may depend on how well powerful stakeholders are managed. Yet, the existing strategic stakeholder management process does not include evaluation of stakeholder management performance. To address this critical gap, this paper proposes a systematic method for evaluation using a stakeholder report card. An example of a physician report card based on this methodology is presented.

Computer systems performance measurement techniques.

DOT National Transportation Integrated Search

1971-06-01

Computer system performance measurement techniques, tools, and approaches are presented as a foundation for future recommendations regarding the instrumentation of the ARTS ATC data processing subsystem for purposes of measurement and evaluation.

Stability of prebiotic, laminaran oligosaccharide under food processing conditions

NASA Astrophysics Data System (ADS)

Chamidah, A.

2018-04-01

Prebiotic stability tests on laminaran oligosaccharide under food processing conditions were urgently performed to determine the ability of prebiotics deal with processing. Laminaran, oligosaccharide is produced from enzymatic hydrolysis. To further apply this prebiotic, it is necessary to test its performance on food processing. Single prebiotic or in combination with probiotic can improve human digestive health. The effectiveness evaluation of prebiotic should be taken into account in regards its chemical and functional stabilities. This study aims to investigate the stability of laminaran, oligosaccharide under food processing condition.

Polymer performance in cooling water: The influence of process variables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amjad, Z.; Pugh, J.; Zibrida, J.

1997-01-01

The key to the efficacy of phosphate and phosphonates in stabilized phosphate and all-organic cooling water treatment (CWT) programs is the presence and performance of polymeric inhibitors/dispersants. The performance of polymeric additives used in CWT programs can be adversely impacted by the presence of iron, phosphonate, or cationic polymer and influenced by a variety of process variables including system pH and temperature. In this article, the performance of several polymeric additives is evaluated under a variety of stressed conditions.

Polymer performance in cooling water: The influence of process variables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amjad, Z.; Pugh, J.; Zibrida, J.

1996-12-01

The key to the efficacy of phosphate and phosphonates in stabilized phosphate and all-organic cooling water treatment (CWT) programs is the presence and performance of polymeric inhibitors/dispersants. The performance of polymeric additives used in CWT programs can be adversely impacted by the presence of iron, phosphonate, or cationic polymer and influenced by a variety of process variables including system pH and temperature. In this paper, the performance of several polymeric additives is evaluated under a variety of stressed conditions.

Validation of X1 motorcycle model in industrial plant layout by using WITNESSTM simulation software

NASA Astrophysics Data System (ADS)

Hamzas, M. F. M. A.; Bareduan, S. A.; Zakaria, M. Z.; Tan, W. J.; Zairi, S.

2017-09-01

This paper demonstrates a case study on simulation, modelling and analysis for X1 Motorcycles Model. In this research, a motorcycle assembly plant has been selected as a main place of research study. Simulation techniques by using Witness software were applied to evaluate the performance of the existing manufacturing system. The main objective is to validate the data and find out the significant impact on the overall performance of the system for future improvement. The process of validation starts when the layout of the assembly line was identified. All components are evaluated to validate whether the data is significance for future improvement. Machine and labor statistics are among the parameters that were evaluated for process improvement. Average total cycle time for given workstations is used as criterion for comparison of possible variants. From the simulation process, the data used are appropriate and meet the criteria for two-sided assembly line problems.

Assessing and Improving Performance: A Longitudinal Evaluation of Priority Setting and Resource Allocation in a Canadian Health Region

PubMed Central

Hall, William; Smith, Neale; Mitton, Craig; Urquhart, Bonnie; Bryan, Stirling

2018-01-01

Background: In order to meet the challenges presented by increasing demand and scarcity of resources, healthcare organizations are faced with difficult decisions related to resource allocation. Tools to facilitate evaluation and improvement of these processes could enable greater transparency and more optimal distribution of resources. Methods: The Resource Allocation Performance Assessment Tool (RAPAT) was implemented in a healthcare organization in British Columbia, Canada. Recommendations for improvement were delivered, and a follow up evaluation exercise was conducted to assess the trajectory of the organization’s priority setting and resource allocation (PSRA) process 2 years post the original evaluation. Results: Implementation of RAPAT in the pilot organization identified strengths and weaknesses of the organization’s PSRA process at the time of the original evaluation. Strengths included the use of criteria and evidence, an ability to reallocate resources, and the involvement of frontline staff in the process. Weaknesses included training, communication, and lack of program budgeting. Although the follow up revealed a regression from a more formal PSRA process, a legacy of explicit resource allocation was reported to be providing ongoing benefit for the organization. Conclusion: While past studies have taken a cross-sectional approach, this paper introduces the first longitudinal evaluation of PSRA in a healthcare organization. By including the strengths, weaknesses, and evolution of one organization’s journey, the authors’ intend that this paper will assist other healthcare leaders in meeting the challenges of allocating scarce resources. PMID:29626400

Development of patient collation system by kinetic analysis for chest dynamic radiogram with flat panel detector

NASA Astrophysics Data System (ADS)

Tsuchiya, Yuichiro; Kodera, Yoshie

2006-03-01

In the picture archiving and communication system (PACS) environment, it is important that all images be stored in the correct location. However, if information such as the patient's name or identification number has been entered incorrectly, it is difficult to notice the error. The present study was performed to develop a system of patient collation automatically for dynamic radiogram examination by a kinetic analysis, and to evaluate the performance of the system. Dynamic chest radiographs during respiration were obtained by using a modified flat panel detector system. Our computer algorithm developed in this study was consisted of two main procedures, kinetic map imaging processing, and collation processing. Kinetic map processing is a new algorithm to visualize a movement for dynamic radiography; direction classification of optical flows and intensity-density transformation technique was performed. Collation processing consisted of analysis with an artificial neural network (ANN) and discrimination for Mahalanobis' generalized distance, those procedures were performed to evaluate a similarity of combination for the same person. Finally, we investigated the performance of our system using eight healthy volunteers' radiographs. The performance was shown as a sensitivity and specificity. The sensitivity and specificity for our system were shown 100% and 100%, respectively. This result indicated that our system has excellent performance for recognition of a patient. Our system will be useful in PACS management for dynamic chest radiography.

Assessment of the degradation efficiency of full-scale biogas plants: A comparative study of degradation indicators.

PubMed

Li, Chao; Nges, Ivo Achu; Lu, Wenjing; Wang, Haoyu

2017-11-01

Increasing popularity and applications of the anaerobic digestion (AD) process has necessitated the development and identification of tools for obtaining reliable indicators of organic matter degradation rate and hence evaluate the process efficiency especially in full-scale, commercial biogas plants. In this study, four biogas plants (A1, A2, B and C) based on different feedstock, process configuration, scale and operational performance were selected and investigated. Results showed that the biochemical methane potential (BMP) based degradation rate could be use in incisively gauging process efficiency in lieu of the traditional degradation rate indicators. The BMP degradation rates ranged from 70 to 90% wherein plants A2 and C showed the highest throughput. This study, therefore, corroborates the feasibility of using the BMP degradation rate as a practical tool for evaluating process performance in full-scale biogas processes and spots light on the microbial diversity in full-scale biogas processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Composition/Property Relationships for the Phase 2 Am-Cm Glass Variability Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peeler, D.

The objective of this research was to evaluate the effect of compositional uncertainties on the primary processing and product performance criteria for potential glasses to stabilize the Tank 17.1 Am-Cm solution and to identify the AGCR in which glasses simultaneously meet both process and product performance criteria as defined for Phase 2.

Development of a Goal Setting Process and Instrumentation for Teachers and Principals.

ERIC Educational Resources Information Center

Minix, Nancy; And Others

A pilot program, the Career Ladder Plan, was developed in Kentucky to evaluate a teacher's performance in terms of professional growth and development and professional leadership/initiative based on that teacher's performance on a setting/goal attainment process. Goals jointly selected by the teacher and his/her principal must contribute to school…

Exploring the Potential for and Promise of Incorporating Distributive and Procedural Justices into Post-Secondary Assessment of Student Learning

ERIC Educational Resources Information Center

Grace, Christine Cooper

2017-01-01

This paper explores the potential of incorporating constructs of distributive justice and procedural justice into summative assessment of student learning in higher education. I systematically compare the process used by managers to evaluate employee performance in organizations--performance appraisal (PA)--with processes used by professors to…

‘If you are good, I get better’: the role of social hierarchy in perceptual decision-making

PubMed Central

Pannunzi, Mario; Ayneto, Alba; Deco, Gustavo; Sebastián-Gallés, Nuria

2014-01-01

So far, it was unclear if social hierarchy could influence sensory or perceptual cognitive processes. We evaluated the effects of social hierarchy on these processes using a basic visual perceptual decision task. We constructed a social hierarchy where participants performed the perceptual task separately with two covertly simulated players (superior, inferior). Participants were faster (better) when performing the discrimination task with the superior player. We studied the time course when social hierarchy was processed using event-related potentials and observed hierarchical effects even in early stages of sensory-perceptual processing, suggesting early top–down modulation by social hierarchy. Moreover, in a parallel analysis, we fitted a drift-diffusion model (DDM) to the results to evaluate the decision making process of this perceptual task in the context of a social hierarchy. Consistently, the DDM pointed to nondecision time (probably perceptual encoding) as the principal period influenced by social hierarchy. PMID:23946003

Administrator Accountability Plan, 1986-87.

ERIC Educational Resources Information Center

Council Bluffs Community School District, IA.

This summary outline presents performance evaluation procedures of the 1986-87 administrator accountability plan adopted by the Council Bluffs Community Schools, Iowa. Procedures ensure that a cooperative evaluation plan is established, there is continuity between evaluation cycles, guidance and assistance are provided, and due process is…

Evaluation of a hyperspectral image database for demosaicking purposes

NASA Astrophysics Data System (ADS)

Larabi, Mohamed-Chaker; Süsstrunk, Sabine

2011-01-01

We present a study on the the applicability of hyperspectral images to evaluate color filter array (CFA) design and the performance of demosaicking algorithms. The aim is to simulate a typical digital still camera processing pipe-line and to compare two different scenarios: evaluate the performance of demosaicking algorithms applied to raw camera RGB values before color rendering to sRGB, and evaluate the performance of demosaicking algorithms applied on the final sRGB color rendered image. The second scenario is the most frequently used one in literature because CFA design and algorithms are usually tested on a set of existing images that are already rendered, such as the Kodak Photo CD set containing the well-known lighthouse image. We simulate the camera processing pipe-line with measured spectral sensitivity functions of a real camera. Modeling a Bayer CFA, we select three linear demosaicking techniques in order to perform the tests. The evaluation is done using CMSE, CPSNR, s-CIELAB and MSSIM metrics to compare demosaicking results. We find that the performance, and especially the difference between demosaicking algorithms, is indeed significant depending if the mosaicking/demosaicking is applied to camera raw values as opposed to already rendered sRGB images. We argue that evaluating the former gives a better indication how a CFA/demosaicking combination will work in practice, and that it is in the interest of the community to create a hyperspectral image dataset dedicated to that effect.

Performance assessment methodology and preliminary results for low-level radioactive waste disposal in Taiwan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Bill Walter; Chang, Fu-lin; Mattie, Patrick D.

2006-02-01

Sandia National Laboratories (SNL) and Taiwan's Institute for Nuclear Energy Research (INER) have teamed together to evaluate several candidate sites for Low-Level Radioactive Waste (LLW) disposal in Taiwan. Taiwan currently has three nuclear power plants, with another under construction. Taiwan also has a research reactor, as well as medical and industrial wastes to contend with. Eventually the reactors will be decomissioned. Operational and decommissioning wastes will need to be disposed in a licensed disposal facility starting in 2014. Taiwan has adopted regulations similar to the US Nuclear Regulatory Commission's (NRC's) low-level radioactive waste rules (10 CFR 61) to govern themore » disposal of LLW. Taiwan has proposed several potential sites for the final disposal of LLW that is now in temporary storage on Lanyu Island and on-site at operating nuclear power plants, and for waste generated in the future through 2045. The planned final disposal facility will have a capacity of approximately 966,000 55-gallon drums. Taiwan is in the process of evaluating the best candidate site to pursue for licensing. Among these proposed sites there are basically two disposal concepts: shallow land burial and cavern disposal. A representative potential site for shallow land burial is located on a small island in the Taiwan Strait with basalt bedrock and interbedded sedimentary rocks. An engineered cover system would be constructed to limit infiltration for shallow land burial. A representative potential site for cavern disposal is located along the southeastern coast of Taiwan in a tunnel system that would be about 500 to 800 m below the surface. Bedrock at this site consists of argillite and meta-sedimentary rocks. Performance assessment analyses will be performed to evaluate future performance of the facility and the potential dose/risk to exposed populations. Preliminary performance assessment analyses will be used in the site-selection process and to aid in design of the disposal system. Final performance assessment analyses will be used in the regulatory process of licensing a site. The SNL/INER team has developed a performance assessment methodology that is used to simulate processes associated with the potential release of radionuclides to evaluate these sites. The following software codes are utilized in the performance assessment methodology: GoldSim (to implement a probabilistic analysis that will explicitly address uncertainties); the NRC's Breach, Leach, and Transport - Multiple Species (BLT-MS) code (to simulate waste-container degradation, waste-form leaching, and transport through the host rock); the Finite Element Heat and Mass Transfer code (FEHM) (to simulate groundwater flow and estimate flow velocities); the Hydrologic Evaluation of Landfill performance Model (HELP) code (to evaluate infiltration through the disposal cover); the AMBER code (to evaluate human health exposures); and the NRC's Disposal Unit Source Term -- Multiple Species (DUST-MS) code (to screen applicable radionuclides). Preliminary results of the evaluations of the two disposal concept sites are presented.« less

Evaluation of Graphite Fiber/Polyimide PMCs from Hot Melt vs Solution Prepreg

NASA Technical Reports Server (NTRS)

Shin, E. Eugene; Sutter, James K.; Eakin, Howard; Inghram, Linda; McCorkle, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Thesken, John; Fink, Jeffrey E.

2002-01-01

Carbon fiber reinforced high temperature polymer matrix composites (PMC) have been extensively investigated as potential weight reduction replacements of various metallic components in next generation high performance propulsion rocket engines. The initial phase involves development of comprehensive composite material-process-structure-design-property-in-service performance correlations and database, especially for a high stiffness facesheet of various sandwich structures. Overview of the program plan, technical approaches and current multi-team efforts will be presented. During composite fabrication, it was found that the two large volume commercial prepregging methods (hot-melt vs. solution) resulted in considerably different composite cure behavior. Details of the process-induced physical and chemical modifications in the prepregs, their effects on composite processing, and systematic cure cycle optimization studies will be discussed. The combined effects of prepregging method and cure cycle modification on composite properties and isothermal aging performance were also evaluated.

Evaluating print performance of Sn-Ag-Cu lead-free solder pastes used in electronics assembly process

NASA Astrophysics Data System (ADS)

Mallik, S.; Bauer, R.; Hübner, F.; Ekere, N. N.

2011-01-01

Solder paste is the most widely used interconnection material in the electronic assembly process for attaching electronic components/devices directly onto the surface of printed circuit boards, using stencil printing process. This paper evaluates the performance of three different commercially available Sn-Ag-Cu solder pastes formulated with different particle size distributions (PSD), metal content and alloy composition. A series of stencil printing tests were carried out using a specially designed stencil of 75 μm thickness and apertures of 300×300 μm2 dimension and 500 μm pitch sizes. Solder paste printing behaviors were found related to attributes such as slumping and surface tension and printing performance was correlated with metal content and PSD. The results of the study should benefit paste manufacturers and SMT assemblers to improve their products and practices.

Verification and Validation Methodology of Real-Time Adaptive Neural Networks for Aerospace Applications

NASA Technical Reports Server (NTRS)

Gupta, Pramod; Loparo, Kenneth; Mackall, Dale; Schumann, Johann; Soares, Fola

2004-01-01

Recent research has shown that adaptive neural based control systems are very effective in restoring stability and control of an aircraft in the presence of damage or failures. The application of an adaptive neural network with a flight critical control system requires a thorough and proven process to ensure safe and proper flight operation. Unique testing tools have been developed as part of a process to perform verification and validation (V&V) of real time adaptive neural networks used in recent adaptive flight control system, to evaluate the performance of the on line trained neural networks. The tools will help in certification from FAA and will help in the successful deployment of neural network based adaptive controllers in safety-critical applications. The process to perform verification and validation is evaluated against a typical neural adaptive controller and the results are discussed.

Evaluation of Graphite Fiber/Polyimide PMCs from Hot Melt versus Solution Prepreg

NASA Technical Reports Server (NTRS)

Shin, Eugene E.; Sutter, James K.; Eakin, Howard; Inghram, Linda; McCorkle, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Thesken, John; Fink, Jeffrey E.; Gray, Hugh R. (Technical Monitor)

2002-01-01

Carbon fiber reinforced high temperature polymer matrix composites (PMC) have been extensively investigated as potential weight reduction replacements of various metallic components in next generation high performance propulsion rocket engines. The initial phase involves development of comprehensive composite material-process-structure-design-property in-service performance correlations and database, especially for a high stiffness facesheet of various sandwich structures. Overview of the program plan, technical approaches and current multi-team efforts will be presented. During composite fabrication, it was found that the two large volume commercial prepregging methods (hot-melt vs. solution) resulted in considerably different composite cure behavior. Details of the process-induced physical and chemical modifications in the prepregs, their effects on composite processing, and systematic cure cycle optimization studies will be discussed. The combined effects of prepregging method and cure cycle modification on composite properties and isothermal aging performance were also evaluated.

Preliminary design review package for the solar heating and cooling central data processing system

NASA Technical Reports Server (NTRS)

1976-01-01

The Central Data Processing System (CDPS) is designed to transform the raw data collected at remote sites into performance evaluation information for assessing the performance of solar heating and cooling systems. Software requirements for the CDPS are described. The programming standards to be used in development, documentation, and maintenance of the software are discussed along with the CDPS operations approach in support of daily data collection and processing.

Due Process in Appraisal: A Quasi-Experiment in Procedural Justice.

ERIC Educational Resources Information Center

Taylor, M. Susan; And Others

1995-01-01

Extended research on procedural justice by examining effects of a due-process performance-appraisal system on (government) employees' and managers' reactions. Employee-management pairs were randomly assigned to either a due-process appraisal system or the existing one. Although due-process employees received lower evaluations, both employees and…

78 FR 75571 - Independent Assessment of the Process for the Review of Device Submissions; High Priority...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... of performing the technical analysis, management assessment, and program evaluation tasks required to.... Analysis of elements of the review process (including the presubmission process, and investigational device... time to facilitate a more efficient process. This includes analysis of root causes for inefficiencies...

Automated Plasma Spray (APS) process feasibility study: Plasma spray process development and evaluation

NASA Technical Reports Server (NTRS)

Fetheroff, C. W.; Derkacs, T.; Matay, I. M.

1979-01-01

An automated plasma spray (APS) process was developed to apply two layer (NiCrAlY and ZrO2-12Y2O3) thermal-barrier coatings to aircraft gas turbine engine blade airfoils. The APS process hardware consists of four subsystems: a mechanical blade positioner incorporating two interlaced six-degree-of-freedom assemblies; a noncoherent optical metrology subsystem; a microprocessor-based adaptive system controller; and commercial plasma spray equipment. Over fifty JT9D first stage turbine blades specimens were coated with the APS process in preliminary checkout and evaluation studies. The best of the preliminary specimens achieved an overall coating thickness uniformity of + or - 53 micrometers, much better than is achievable manually. Factors limiting this performance were identified and process modifications were initiated accordingly. Comparative evaluations of coating thickness uniformity for manually sprayed and APS coated specimens were initiated. One of the preliminary evaluation specimens was subjected to a torch test and metallographic evaluation.

Evaluation of computing systems using functionals of a Stochastic process

NASA Technical Reports Server (NTRS)

Meyer, J. F.; Wu, L. T.

1980-01-01

An intermediate model was used to represent the probabilistic nature of a total system at a level which is higher than the base model and thus closer to the performance variable. A class of intermediate models, which are generally referred to as functionals of a Markov process, were considered. A closed form solution of performability for the case where performance is identified with the minimum value of a functional was developed.

[Model oriented assessment of literacy performance in children with cochlear implants].

PubMed

Fiori, A; Reichmuth, K; Matulat, P; Schmidt, C M; Dinnesen, A G

2006-07-01

Although most hearing-impaired children lag behind normally hearing children in literacy acquisition, this aspect has hardly been addressed in the evaluation of language acquisition after cochlear implantation. The present study investigated written language abilities in 8 school-age children with cochlear implants. Neurolinguistic dual-route-models of written language processing indicate that literacy acquisition leads to the establishment of two distinct reading and writing strategies: a lexical one for the quick processing of known words and a sublexical one for decoding unfamiliar words or nonwords letter by letter. 8 school-aged children were investigated, a very heterogeneous group concerning age of onset of hearing impairment, educational placement, and competences in sign language. However, this range is typical of the group of CI-children. The aim was to investigate if children with cochlear implants are able to establish both strategies or if they need to find a differential and individual access to written language. Performance within the Salzburger Lese-Rechtschreib-Test was evaluated. Individual performance of each subject was analysed. Performance varied substantially ranging from only rudimentary spoken and written language abilities in two children to age-equivalent performance in three of them. Severe qualitative differences in written language processing were shown in the remaining three subjects. Suggestions for remediation were made and a re-test was carried out after 12 months. Their individual profiles of performance are described in detail. The present study stresses the importance of a thorough investigation of written language performance in the evaluation of language acquisition after cochlear implantation. The results draw a very heterogeneous picture of performance. Model-oriented testing and analysis of performance prove to be sensible in at least a subpopulation of children with cochlear implants. Based on a better understanding of their acquired word-processing strategies, remediation programs meeting the needs of each individual child can be derived.

Surgery resident selection and evaluation. A critical incident study.

PubMed

Edwards, J C; Currie, M L; Wade, T P; Kaminski, D L

1993-03-01

This article reports a study of the process of selecting and evaluating general surgery residents. In personnel psychology terms, a job analysis of general surgery was conducted using the Critical Incident Technique (CIT). The researchers collected 235 critical incidents through structured interviews with 10 general surgery faculty members and four senior residents. The researchers then directed the surgeons in a two-step process of sorting the incidents into categories and naming the categories. The final essential categories of behavior to define surgical competence were derived through discussion among the surgeons until a consensus was formed. Those categories are knowledge/self-education, clinical performance, diagnostic skills, surgical skills, communication skills, reliability, integrity, compassion, organization skills, motivation, emotional control, and personal appearance. These categories were then used to develop an interview evaluation form for selection purposes and a performance evaluation form to be used throughout residency training. Thus a continuum of evaluation was established. The categories and critical incidents were also used to structure the interview process, which has demonstrated increased interview validity and reliability in many other studies. A handbook for structuring the interviews faculty members conduct with applicants was written, and an interview training session was held with the faculty. The process of implementation of the structured selection interviews is being documented currently through qualitative research.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adhikari, B.; Pellegrino, J.; Stickel, J.

We are currently evaluating the feasibility of performing continuous enzymatic hydrolysis of lignocellulosic biomass to product sugars using a membrane-assisted reaction/separation process. The overarching technical goals are to continuously remove the sugars—this lowers product feedback inhibition—retain and recycle active enzyme, and continuously recover the co-product of lignin. Experimental d d d currently evaluating the feasibility of performing continuous enzymatic hydrolysis of lignocellulosic biomass to product sugars using a membrane-assisted reaction/separation process. The overarching technical goals are to continuously remove the sugars -- this lowers product feedback inhibition --retain and recycle active enzyme, and continuously recover the co-product of lignin.

A Computer-Based Instructional Support Network: Design, Development, and Evaluation

DTIC Science & Technology

1990-09-01

mail systems, the ISN would be relatively easy to learn and use. Survey Related Projects A literature review was conducted using the Manpower and... the impact of the ISN upon student attrition, performance, and attitudes . The context of the evaluation was a sequence of NPS Continuing Education (CE...waiLed for the subject to complete the task alone. Process Measures The following forms of process data ( relating to evaluation objectives I and 2) were

Development and testing of controller performance evaluation methodology for multi-input/multi-output digital control systems

NASA Technical Reports Server (NTRS)

Pototzky, Anthony; Wieseman, Carol; Hoadley, Sherwood Tiffany; Mukhopadhyay, Vivek

1991-01-01

Described here is the development and implementation of on-line, near real time controller performance evaluation (CPE) methods capability. Briefly discussed are the structure of data flow, the signal processing methods used to process the data, and the software developed to generate the transfer functions. This methodology is generic in nature and can be used in any type of multi-input/multi-output (MIMO) digital controller application, including digital flight control systems, digitally controlled spacecraft structures, and actively controlled wind tunnel models. Results of applying the CPE methodology to evaluate (in near real time) MIMO digital flutter suppression systems being tested on the Rockwell Active Flexible Wing (AFW) wind tunnel model are presented to demonstrate the CPE capability.

Test Takers' Performance Appraisals, Appraisal Calibration, and Cognitive and Metacognitive Strategy Use

ERIC Educational Resources Information Center

Phakiti, Aek

2016-01-01

The current study explores the nature and relationships among test takers' performance appraisals, appraisal calibration, and reported cognitive and metacognitive strategy use in a language test situation. Performance appraisals are executive processes of strategic competence for judging test performance (e.g., evaluating the correctness or…

49 CFR 240.127 - Criteria for examining skill performance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Criteria for examining skill performance. 240.127... Elements of the Certification Process § 240.127 Criteria for examining skill performance. (a) Each railroad... have procedures for examining the performance skills of a person being evaluated for qualification as a...

49 CFR 240.127 - Criteria for examining skill performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Criteria for examining skill performance. 240.127... Elements of the Certification Process § 240.127 Criteria for examining skill performance. (a) Each railroad... have procedures for examining the performance skills of a person being evaluated for qualification as a...

A Safety Index and Method for Flightdeck Evaluation

NASA Technical Reports Server (NTRS)

Latorella, Kara A.

2000-01-01

If our goal is to improve safety through machine, interface, and training design, then we must define a metric of flightdeck safety that is usable in the design process. Current measures associated with our notions of "good" pilot performance and ultimate safety of flightdeck performance fail to provide an adequate index of safe flightdeck performance for design evaluation purposes. The goal of this research effort is to devise a safety index and method that allows us to evaluate flightdeck performance holistically and in a naturalistic experiment. This paper uses Reason's model of accident causation (1990) as a basis for measuring safety, and proposes a relational database system and method for 1) defining a safety index of flightdeck performance, and 2) evaluating the "safety" afforded by flightdeck performance for the purpose of design iteration. Methodological considerations, limitations, and benefits are discussed as well as extensions to this work.

Using hybrid method to evaluate the green performance in uncertainty.

PubMed

Tseng, Ming-Lang; Lan, Lawrence W; Wang, Ray; Chiu, Anthony; Cheng, Hui-Ping

2011-04-01

Green performance measure is vital for enterprises in making continuous improvements to maintain sustainable competitive advantages. Evaluation of green performance, however, is a challenging task due to the dependence complexity of the aspects, criteria, and the linguistic vagueness of some qualitative information and quantitative data together. To deal with this issue, this study proposes a novel approach to evaluate the dependence aspects and criteria of firm's green performance. The rationale of the proposed approach, namely green network balanced scorecard, is using balanced scorecard to combine fuzzy set theory with analytical network process (ANP) and importance-performance analysis (IPA) methods, wherein fuzzy set theory accounts for the linguistic vagueness of qualitative criteria and ANP converts the relations among the dependence aspects and criteria into an intelligible structural modeling used IPA. For the empirical case study, four dependence aspects and 34 green performance criteria for PCB firms in Taiwan were evaluated. The managerial implications are discussed.

Implementation of Statistical Process Control: Evaluating the Mechanical Performance of a Candidate Silicone Elastomer Docking Seal

NASA Technical Reports Server (NTRS)

Oravec, Heather Ann; Daniels, Christopher C.

2014-01-01

The National Aeronautics and Space Administration has been developing a novel docking system to meet the requirements of future exploration missions to low-Earth orbit and beyond. A dynamic gas pressure seal is located at the main interface between the active and passive mating components of the new docking system. This seal is designed to operate in the harsh space environment, but is also to perform within strict loading requirements while maintaining an acceptable level of leak rate. In this study, a candidate silicone elastomer seal was designed, and multiple subscale test articles were manufactured for evaluation purposes. The force required to fully compress each test article at room temperature was quantified and found to be below the maximum allowable load for the docking system. However, a significant amount of scatter was observed in the test results. Due to the stochastic nature of the mechanical performance of this candidate docking seal, a statistical process control technique was implemented to isolate unusual compression behavior from typical mechanical performance. The results of this statistical analysis indicated a lack of process control, suggesting a variation in the manufacturing phase of the process. Further investigation revealed that changes in the manufacturing molding process had occurred which may have influenced the mechanical performance of the seal. This knowledge improves the chance of this and future space seals to satisfy or exceed design specifications.

Kinetics of autotrophic denitrification process and the impact of sulphur/limestone ratio on the process performance.

PubMed

Kilic, Arzu; Sahinkaya, Erkan; Cinar, Ozer

2014-01-01

Kinetics of sulphur-limestone autotrophic denitrification process in batch assays and the impact of sulphur/limestone ratio on the process performance in long-term operated packed-bed bioreactors were evaluated. The specific nitrate and nitrite reduction rates increased almost linearly with the increasing initial nitrate and nitrite concentrations, respectively. The process performance was evaluated in three parallel packed-bed bioreactors filled with different sulphur/limestone ratios (1:1, 2:1 and 3:1, v/v). Performances of the bioreactors were studied under varying nitrate loadings (0.05 - 0.80 gNO(-)(3) - NL⁻¹ d⁻¹) and hydraulic retention times (3-12 h). The maximum nitrate reduction rate of 0.66 g L⁻¹ d⁻¹ was observed at the loading rate of 0.80 g NO(-)(3) - N L⁻¹ d⁻¹ in the reactor with sulphur/limestone ratio of 3:1. Throughout the study, nitrite concentrations remained quite low (i.e. below 0.5 mg L⁻¹ NO(-)(2) -N. The reactor performance increased in the order of sulphur/limestone ratio of 3:1, 2:1 and 1:1. Denaturing gradient gel electrophoresis analysis of 16S rRNA genes showed quite stable communities in the reactors with the presence of Methylo virgulaligni, Sulfurimonas autotrophica, Sulfurovum lithotrophicum, Thiobacillus aquaesulis and Sulfurimonas autotrophica related species.

Quality measurement and benchmarking of HPV vaccination services: a new approach.

PubMed

Maurici, Massimo; Paulon, Luca; Campolongo, Alessandra; Meleleo, Cristina; Carlino, Cristiana; Giordani, Alessandro; Perrelli, Fabrizio; Sgricia, Stefano; Ferrante, Maurizio; Franco, Elisabetta

2014-01-01

A new measurement process based upon a well-defined mathematical model was applied to evaluate the quality of human papillomavirus (HPV) vaccination centers in 3 of 12 Local Health Units (ASLs) within the Lazio Region of Italy. The quality aspects considered for evaluation were communicational efficiency, organizational efficiency and comfort. The overall maximum achievable value was 86.10%, while the HPV vaccination quality scores for ASL1, ASL2 and ASL3 were 73.07%, 71.08%, and 67.21%, respectively. With this new approach it is possible to represent the probabilistic reasoning of a stakeholder who evaluates the quality of a healthcare provider. All ASLs had margins for improvements and optimal quality results can be assessed in terms of better performance conditions, confirming the relationship between the resulting quality scores and HPV vaccination coverage. The measurement process was structured into three steps and involved four stakeholder categories: doctors, nurses, parents and vaccinated women. In Step 1, questionnaires were administered to collect different stakeholders' points of view (i.e., subjective data) that were elaborated to obtain the best and worst performance conditions when delivering a healthcare service. Step 2 of the process involved the gathering of performance data during the service delivery (i.e., objective data collection). Step 3 of the process involved the elaboration of all data: subjective data from step 1 are used to define a "standard" to test objective data from step 2. This entire process led to the creation of a set of scorecards. Benchmarking is presented as a result of the probabilistic meaning of the evaluated scores.

Toward an optimisation technique for dynamically monitored environment

NASA Astrophysics Data System (ADS)

Shurrab, Orabi M.

2016-10-01

The data fusion community has introduced multiple procedures of situational assessments; this is to facilitate timely responses to emerging situations. More directly, the process refinement of the Joint Directors of Laboratories (JDL) is a meta-process to assess and improve the data fusion task during real-time operation. In other wording, it is an optimisation technique to verify the overall data fusion performance, and enhance it toward the top goals of the decision-making resources. This paper discusses the theoretical concept of prioritisation. Where the analysts team is required to keep an up to date with the dynamically changing environment, concerning different domains such as air, sea, land, space and cyberspace. Furthermore, it demonstrates an illustration example of how various tracking activities are ranked, simultaneously into a predetermined order. Specifically, it presents a modelling scheme for a case study based scenario, where the real-time system is reporting different classes of prioritised events. Followed by a performance metrics for evaluating the prioritisation process of situational awareness (SWA) domain. The proposed performance metrics has been designed and evaluated using an analytical approach. The modelling scheme represents the situational awareness system outputs mathematically, in the form of a list of activities. Such methods allowed the evaluation process to conduct a rigorous analysis of the prioritisation process, despite any constrained related to a domain-specific configuration. After conducted three levels of assessments over three separates scenario, The Prioritisation Capability Score (PCS) has provided an appropriate scoring scheme for different ranking instances, Indeed, from the data fusion perspectives, the proposed metric has assessed real-time system performance adequately, and it is capable of conducting a verification process, to direct the operator's attention to any issue, concerning the prioritisation capability of situational awareness domain.

Evaluating Organic Aerosol Model Performance: Impact of two Embedded Assumptions

NASA Astrophysics Data System (ADS)

Jiang, W.; Giroux, E.; Roth, H.; Yin, D.

2004-05-01

Organic aerosols are important due to their abundance in the polluted lower atmosphere and their impact on human health and vegetation. However, modeling organic aerosols is a very challenging task because of the complexity of aerosol composition, structure, and formation processes. Assumptions and their associated uncertainties in both models and measurement data make model performance evaluation a truly demanding job. Although some assumptions are obvious, others are hidden and embedded, and can significantly impact modeling results, possibly even changing conclusions about model performance. This paper focuses on analyzing the impact of two embedded assumptions on evaluation of organic aerosol model performance. One assumption is about the enthalpy of vaporization widely used in various secondary organic aerosol (SOA) algorithms. The other is about the conversion factor used to obtain ambient organic aerosol concentrations from measured organic carbon. These two assumptions reflect uncertainties in the model and in the ambient measurement data, respectively. For illustration purposes, various choices of the assumed values are implemented in the evaluation process for an air quality model based on CMAQ (the Community Multiscale Air Quality Model). Model simulations are conducted for the Lower Fraser Valley covering Southwest British Columbia, Canada, and Northwest Washington, United States, for a historical pollution episode in 1993. To understand the impact of the assumed enthalpy of vaporization on modeling results, its impact on instantaneous organic aerosol yields (IAY) through partitioning coefficients is analysed first. The analysis shows that utilizing different enthalpy of vaporization values causes changes in the shapes of IAY curves and in the response of SOA formation capability of reactive organic gases to temperature variations. These changes are then carried into the air quality model and cause substantial changes in the organic aerosol modeling results. In another aspect, using different assumed factors to convert measured organic carbon to organic aerosol concentrations cause substantial variations in the processed ambient data themselves, which are normally used as performance targets for model evaluations. The combination of uncertainties in the modeling results and in the moving performance targets causes major uncertainties in the final conclusion about the model performance. Without further information, the best thing that a modeler can do is to choose a combination of the assumed values from the sensible parameter ranges available in the literature, based on the best match of the modeling results with the processed measurement data. However, the best match of the modeling results with the processed measurement data may not necessarily guarantee that the model itself is rigorous and the model performance is robust. Conclusions on the model performance can only be reached with sufficient understanding of the uncertainties and their impact.

Focused process improvement events: sustainability of impact on process and performance in an academic radiology department.

PubMed

Rosenkrantz, Andrew B; Lawson, Kirk; Ally, Rosina; Chen, David; Donno, Frank; Rittberg, Steven; Rodriguez, Joan; Recht, Michael P

2015-01-01

To evaluate sustainability of impact of rapid, focused process improvement (PI) events on process and performance within an academic radiology department. Our department conducted PI during 2011 and 2012 in CT, MRI, ultrasound, breast imaging, and research billing. PI entailed participation by all stakeholders, facilitation by the department chair, collection of baseline data, meetings during several weeks, definition of performance metrics, creation of an improvement plan, and prompt implementation. We explore common themes among PI events regarding initial impact and durability of changes. We also assess performance in each area pre-PI, immediately post-PI, and at the time of the current study. All PI events achieved an immediate improvement in performance metrics, often entailing both examination volumes and on-time performance. IT-based solutions, process standardization, and redefinition of staff responsibilities were often central in these changes, and participants consistently expressed improved internal leadership and problem-solving ability. Major environmental changes commonly occurred after PI, including a natural disaster with equipment loss, a change in location or services offered, and new enterprise-wide electronic medical record system incorporating new billing and radiology informatics systems, requiring flexibility in the PI implementation plan. Only one PI team conducted regular post-PI follow-up meetings. Sustained improvement was frequently, but not universally, observed: in the long-term following initial PI, measures of examination volume showed continued progressive improvements, whereas measures of operational efficiency remained stable or occasionally declined. Focused PI is generally effective in achieving performance improvement, although a changing environment influences the sustainability of impact. Thus, continued process evaluation and ongoing workflow modifications are warranted. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Data on the sensory evaluation of potatoes (Solanum tuberosum) from different areas of Hokkaido, Japan, performed by untrained young adults.

PubMed

Sato, Hiroaki; Koizumi, Ryosuke; Nakazawa, Yozo; Yamazaki, Masao; Itoyama, Ryuichi; Ichisawa, Megumi; Negishi, Junko; Sakuma, Rui; Furusho, Tadasu; Sagane, Yoshimasa; Takano, Katsumi

2017-12-01

This data article describes a sensory evaluation of potatoes used in food processing from the Tokachi, Kamikawa, and Abashiri geographic areas of Hokkaido, Japan, performed by untrained young adults. We gathered sensory data on potatoes from the four cultivars 'Toyoshiro,' 'Kitahime,' 'Snowden,' and 'Poroshiri.' The sensory evaluation was performed on steamed potatoes from each cultivar; these potatoes were harvested from each of the three geographic areas. Table 1 provides the data from the evaluation of the five basic tastes (sweet, salty, sour, bitter, and umami), as well as the evaluation of the egumi taste, which is a Japanese term indicating a taste that is acrid, astringent, and slightly bitter.

High performance dielectric materials development

NASA Technical Reports Server (NTRS)

Piche, Joe; Kirchner, Ted; Jayaraj, K.

1994-01-01

The mission of polymer composites materials technology is to develop materials and processing technology to meet DoD and commercial needs. The following are outlined in this presentation: high performance capacitors, high temperature aerospace insulation, rationale for choosing Foster-Miller (the reporting industry), the approach to the development and evaluation of high temperature insulation materials, and the requirements/evaluation parameters. Supporting tables and diagrams are included.

High performance dielectric materials development

NASA Astrophysics Data System (ADS)

Piche, Joe; Kirchner, Ted; Jayaraj, K.

1994-09-01

The mission of polymer composites materials technology is to develop materials and processing technology to meet DoD and commercial needs. The following are outlined in this presentation: high performance capacitors, high temperature aerospace insulation, rationale for choosing Foster-Miller (the reporting industry), the approach to the development and evaluation of high temperature insulation materials, and the requirements/evaluation parameters. Supporting tables and diagrams are included.

A Generalized Thurstonian Paired Comparison Multicriteria Heuristic Model for Peer Evaluation of Individual Performance on IS Team Projects

ERIC Educational Resources Information Center

Scher, Julian M.

2010-01-01

Information Systems instructors are generally encouraged to introduce team projects into their pedagogy, with a consequential issue of objectively evaluating the performance of each individual team member. The concept of "freeloading" is well-known for team projects, and for this, and other reasons, a peer review process of team members,…

Towards a Cloud Based Smart Traffic Management Framework

NASA Astrophysics Data System (ADS)

Rahimi, M. M.; Hakimpour, F.

2017-09-01

Traffic big data has brought many opportunities for traffic management applications. However several challenges like heterogeneity, storage, management, processing and analysis of traffic big data may hinder their efficient and real-time applications. All these challenges call for well-adapted distributed framework for smart traffic management that can efficiently handle big traffic data integration, indexing, query processing, mining and analysis. In this paper, we present a novel, distributed, scalable and efficient framework for traffic management applications. The proposed cloud computing based framework can answer technical challenges for efficient and real-time storage, management, process and analyse of traffic big data. For evaluation of the framework, we have used OpenStreetMap (OSM) real trajectories and road network on a distributed environment. Our evaluation results indicate that speed of data importing to this framework exceeds 8000 records per second when the size of datasets is near to 5 million. We also evaluate performance of data retrieval in our proposed framework. The data retrieval speed exceeds 15000 records per second when the size of datasets is near to 5 million. We have also evaluated scalability and performance of our proposed framework using parallelisation of a critical pre-analysis in transportation applications. The results show that proposed framework achieves considerable performance and efficiency in traffic management applications.

Statistically significant performance results of a mine detector and fusion algorithm from an x-band high-resolution SAR

NASA Astrophysics Data System (ADS)

Williams, Arnold C.; Pachowicz, Peter W.

2004-09-01

Current mine detection research indicates that no single sensor or single look from a sensor will detect mines/minefields in a real-time manner at a performance level suitable for a forward maneuver unit. Hence, the integrated development of detectors and fusion algorithms are of primary importance. A problem in this development process has been the evaluation of these algorithms with relatively small data sets, leading to anecdotal and frequently over trained results. These anecdotal results are often unreliable and conflicting among various sensors and algorithms. Consequently, the physical phenomena that ought to be exploited and the performance benefits of this exploitation are often ambiguous. The Army RDECOM CERDEC Night Vision Laboratory and Electron Sensors Directorate has collected large amounts of multisensor data such that statistically significant evaluations of detection and fusion algorithms can be obtained. Even with these large data sets care must be taken in algorithm design and data processing to achieve statistically significant performance results for combined detectors and fusion algorithms. This paper discusses statistically significant detection and combined multilook fusion results for the Ellipse Detector (ED) and the Piecewise Level Fusion Algorithm (PLFA). These statistically significant performance results are characterized by ROC curves that have been obtained through processing this multilook data for the high resolution SAR data of the Veridian X-Band radar. We discuss the implications of these results on mine detection and the importance of statistical significance, sample size, ground truth, and algorithm design in performance evaluation.

Plastics processing: statistics, current practices, and evaluation.

PubMed

Cooke, F

1993-11-01

The health care industry uses a huge quantity of plastic materials each year. Much of the machinery currently used, or supplied, for plastics processing is unsuitable for use in a clean environment. In this article, the author outlines the reasons for the current situation and urges companies to re-examine their plastic-processing methods, whether performed in-house or subcontracted out. Some of the factors that should be considered when evaluating plastics-processing equipment are outlined to assist companies in remaining competitive and complying with impending EC regulations on clean room standards for manufacturing areas.

Analysis and Evaluation of the LANDSAT-4 MSS and TM Sensors and Ground Data Processing Systems: Early Results

NASA Technical Reports Server (NTRS)

Bernstein, R.; Lotspiech, J. B.

1985-01-01

The MSS and TM sensor performances were evaluated by studying both the sensors and the characteristics of the data. Information content analysis, image statistics, band-to-band registration, the presence of failed or failing detectors, and sensor resolution are discussed. The TM data were explored from the point of view of adequacy of the ground processing and improvements that could be made to compensate for sensor problems and deficiencies. Radiometric correction processing, compensation for a failed detector, and geometric correction processing are also considered.

Comparative performance evaluation of full-scale anaerobic and aerobic wastewater treatment processes in Brazil.

PubMed

von Sperling, M; Oliveira, S C

2009-01-01

This article evaluates and compares the actual behavior of 166 full-scale anaerobic and aerobic wastewater treatment plants in operation in Brazil, providing information on the performance of the processes in terms of the quality of the generated effluent and the removal efficiency achieved. The observed results of effluent concentrations and removal efficiencies of the constituents BOD, COD, TSS (total suspended solids), TN (total nitrogen), TP (total phosphorus) and FC (faecal or thermotolerant coliforms) have been compared with the typical expected performance reported in the literature. The treatment technologies selected for study were: (a) predominantly anaerobic: (i) septic tank + anaerobic filter (ST + AF), (ii) UASB reactor without post-treatment (UASB) and (iii) UASB reactor followed by several post-treatment processes (UASB + POST); (b) predominantly aerobic: (iv) facultative pond (FP), (v) anaerobic pond followed by facultative pond (AP + FP) and (vi) activated sludge (AS). The results, confirmed by statistical tests, showed that, in general, the best performance was achieved by AS, but closely followed by UASB reactor, when operating with any kind of post-treatment. The effluent quality of the anaerobic processes ST + AF and UASB reactor without post-treatment was very similar to the one presented by facultative pond, a simpler aerobic process, regarding organic matter.

A new full-field digital mammography system with and without the use of an advanced post-processing algorithm: comparison of image quality and diagnostic performance.

PubMed

Ahn, Hye Shin; Kim, Sun Mi; Jang, Mijung; Yun, Bo La; Kim, Bohyoung; Ko, Eun Sook; Han, Boo-Kyung; Chang, Jung Min; Yi, Ann; Cho, Nariya; Moon, Woo Kyung; Choi, Hye Young

2014-01-01

To compare new full-field digital mammography (FFDM) with and without use of an advanced post-processing algorithm to improve image quality, lesion detection, diagnostic performance, and priority rank. During a 22-month period, we prospectively enrolled 100 cases of specimen FFDM mammography (Brestige®), which was performed alone or in combination with a post-processing algorithm developed by the manufacturer: group A (SMA), specimen mammography without application of "Mammogram enhancement ver. 2.0"; group B (SMB), specimen mammography with application of "Mammogram enhancement ver. 2.0". Two sets of specimen mammographies were randomly reviewed by five experienced radiologists. Image quality, lesion detection, diagnostic performance, and priority rank with regard to image preference were evaluated. Three aspects of image quality (overall quality, contrast, and noise) of the SMB were significantly superior to those of SMA (p < 0.05). SMB was significantly superior to SMA for visualizing calcifications (p < 0.05). Diagnostic performance, as evaluated by cancer score, was similar between SMA and SMB. SMB was preferred to SMA by four of the five reviewers. The post-processing algorithm may improve image quality with better image preference in FFDM than without use of the software.

Technology and development requirements for advanced coal conversion systems

NASA Technical Reports Server (NTRS)

1981-01-01

A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.

12 CFR 1808.500 - Evaluation of Qualified Issuer Applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... evaluation process will be based on established standard operating procedures, which may include interviews... Qualified Issuer over the life of the Bond to ensure it meets the performance standards over the life of the...

Board self-evaluation: the Bayside Health experience.

PubMed

Duncan-Marr, Alison; Duckett, Stephen J

2005-08-01

Board evaluation is a critical component of good governance in any organisation. This paper describes the board self-evaluation process used by Bayside Health, a public health service in Melbourne. The question of how governing boards can assess their performance has received increasing attention over the past decade. In particular, the increasing demand for accountability to shareholders and regulators experienced by corporate sector Boards has resulted in greater scrutiny of board performance, with the market and the balance sheet providing some basis for assessment. Performance evaluation of governing boards in the public sector has been more challenging. Performance evaluation is complex in a sector that is not simply driven by the bottom line, where the stakeholders involve both government and the broader community, and where access to, and the quality and safety of the services provided, are often the major public criteria by which performance may be judged. While some practices from the corporate sector can be applied successfully in the public sector, this is not always the case, and public sector boards such as the Board of Directors of Bayside Health have been developing ways to evaluate and improve their performance.

Effects of children's working memory capacity and processing speed on their sentence imitation performance.

PubMed

Poll, Gerard H; Miller, Carol A; Mainela-Arnold, Elina; Adams, Katharine Donnelly; Misra, Maya; Park, Ji Sook

2013-01-01

More limited working memory capacity and slower processing for language and cognitive tasks are characteristics of many children with language difficulties. Individual differences in processing speed have not consistently been found to predict language ability or severity of language impairment. There are conflicting views on whether working memory and processing speed are integrated or separable abilities. To evaluate four models for the relations of individual differences in children's processing speed and working memory capacity in sentence imitation. The models considered whether working memory and processing speed are integrated or separable, as well as the effect of the number of operations required per sentence. The role of working memory as a mediator of the effect of processing speed on sentence imitation was also evaluated. Forty-six children with varied language and reading abilities imitated sentences. Working memory was measured with the Competing Language Processing Task (CLPT), and processing speed was measured with a composite of truth-value judgment and rapid automatized naming tasks. Mixed-effects ordinal regression models evaluated the CLPT and processing speed as predictors of sentence imitation item scores. A single mediator model evaluated working memory as a mediator of the effect of processing speed on sentence imitation total scores. Working memory was a reliable predictor of sentence imitation accuracy, but processing speed predicted sentence imitation only as a component of a processing speed by number of operations interaction. Processing speed predicted working memory capacity, and there was evidence that working memory acted as a mediator of the effect of processing speed on sentence imitation accuracy. The findings support a refined view of working memory and processing speed as separable factors in children's sentence imitation performance. Processing speed does not independently explain sentence imitation accuracy for all sentence types, but contributes when the task requires more mental operations. Processing speed also has an indirect effect on sentence imitation by contributing to working memory capacity. © 2013 Royal College of Speech and Language Therapists.

Performance of redundant disk array organizations in transaction processing environments

NASA Technical Reports Server (NTRS)

Mourad, Antoine N.; Fuchs, W. K.; Saab, Daniel G.

1993-01-01

A performance evaluation is conducted for two redundant disk-array organizations in a transaction-processing environment, relative to the performance of both mirrored disk organizations and organizations using neither striping nor redundancy. The proposed parity-striping alternative to striping with rotated parity is shown to furnish rapid recovery from failure at the same low storage cost without interleaving the data over multiple disks. Both noncached systems and systems using a nonvolatile cache as the controller are considered.

An evaluation of Dynamic TOPMODEL for low flow simulation

NASA Astrophysics Data System (ADS)

Coxon, G.; Freer, J. E.; Quinn, N.; Woods, R. A.; Wagener, T.; Howden, N. J. K.

2015-12-01

Hydrological models are essential tools for drought risk management, often providing input to water resource system models, aiding our understanding of low flow processes within catchments and providing low flow predictions. However, simulating low flows and droughts is challenging as hydrological systems often demonstrate threshold effects in connectivity, non-linear groundwater contributions and a greater influence of water resource system elements during low flow periods. These dynamic processes are typically not well represented in commonly used hydrological models due to data and model limitations. Furthermore, calibrated or behavioural models may not be effectively evaluated during more extreme drought periods. A better understanding of the processes that occur during low flows and how these are represented within models is thus required if we want to be able to provide robust and reliable predictions of future drought events. In this study, we assess the performance of dynamic TOPMODEL for low flow simulation. Dynamic TOPMODEL was applied to a number of UK catchments in the Thames region using time series of observed rainfall and potential evapotranspiration data that captured multiple historic droughts over a period of several years. The model performance was assessed against the observed discharge time series using a limits of acceptability framework, which included uncertainty in the discharge time series. We evaluate the models against multiple signatures of catchment low-flow behaviour and investigate differences in model performance between catchments, model diagnostics and for different low flow periods. We also considered the impact of surface water and groundwater abstractions and discharges on the observed discharge time series and how this affected the model evaluation. From analysing the model performance, we suggest future improvements to Dynamic TOPMODEL to improve the representation of low flow processes within the model structure.

Differences in Activities of Daily Living Performance Between Long-Term Pediatric Sarcoma Survivors and a Matched Comparison Group on Standardized Testing

PubMed Central

Parks, Rebecca; Rasch, Elizabeth K.; Mansky, Patrick J.; Oakley, Frances

2009-01-01

BACKGROUND: In a cross-sectional study examining late effects of pediatric sarcoma therapy, long-term survivors were evaluated on their activities of daily living (ADL) performance. PROCEDURE: Thirty-two persons with Ewing sarcoma family of tumors, rhabdomyosarcoma, and non-rhabdomysarcoma-soft tissue sarcoma enrolled an average of 17 years after treatment. Participants were evaluated using the Assessment of Motor and Process Skills (AMPS) [1], a standardized observational evaluation of ADL task performance. Means and 95% confidence intervals for ADL motor and ADL process ability measures were calculated for four groups: 1) sarcoma survivors, 2) “well” adults matched for age and gender, 3) “well” adults matched for gender that were 10 years older; and 4) “well” adults matched for gender that were 20 years older. RESULTS: ADL motor ability was significantly lower for sarcoma survivors than for the age and gender matched comparison group (p<0.05). There was no significant difference between ADL motor ability of sarcoma survivors and the comparison group 10 years older, but sarcoma survivors had significantly better ADL motor ability (p<0.05) than the oldest comparison group (20 years older). Sarcoma survivors had significantly worse ADL process ability than the age matched group (p<0.05). There was no difference in ADL process ability between the sarcoma survivors and comparison groups that were 10 and 20 years older. CONCLUSIONS: This first report of a clinical evaluation of ADL limitation in pediatric sarcoma survivors treated with intensive multimodal cancer therapy suggests that influences on performance of daily life activities are more common than previously reported. PMID:19533662

Evaluation of Knowledge Development in a Healthcare Setting

NASA Astrophysics Data System (ADS)

Schaffer, Scott P.

Healthcare organizations worldwide have recently increased efforts to improve performance, quality, and knowledge transfer using information and communication technologies. Evaluation of the effectiveness and quality of such efforts is challenging. A macro and micro-level system evaluation conducted with a 14000 member US hospital administrative services organization examined the appropriateness of a blended face-to-face and technology-enabled performance improvement and knowledge development system. Furthermore, a successful team or microsystem in a high performing hospital was studied in-depth. Several types of data methods including interview, observation, and questionnaire were used to address evaluation questions within a knowledge development framework created for the study. Results of this preliminary study focus on how this organization attempted to organize clinical improvement efforts around quality and performance improvement processes supported by networked technologies.

Assisting allied health in performance evaluation: a systematic review.

PubMed

Lizarondo, Lucylynn; Grimmer, Karen; Kumar, Saravana

2014-11-14

Performance evaluation raises several challenges to allied health practitioners and there is no agreed approach to measuring or monitoring allied health service performance. The aim of this review was to examine the literature on performance evaluation in healthcare to assist in the establishment of a framework that can guide the measurement and evaluation of allied health clinical service performance. This review determined the core elements of a performance evaluation system, tools for evaluating performance, and barriers to the implementation of performance evaluation. A systematic review of the literature was undertaken. Five electronic databases were used to search for relevant articles: MEDLINE, Embase, CINAHL, PsychInfo, and Academic Search Premier. Articles which focussed on any allied health performance evaluation or those which examined performance in health care in general were considered in the review. Content analysis was used to synthesise the findings from individual articles. A total of 37 articles were included in the review. The literature suggests there are core elements involved in performance evaluation which include prioritising clinical areas for measurement, setting goals, selecting performance measures, identifying sources of feedback, undertaking performance measurement, and reporting the results to relevant stakeholders. The literature describes performance evaluation as multi-dimensional, requiring information or data from more than one perspective to provide a rich assessment of performance. A range of tools or instruments are available to capture various perspectives and gather a comprehensive picture of health care quality. Every allied health care delivery system has different performance needs and will therefore require different approaches. However, there are core processes that can be used as a framework to evaluate allied health performance. A careful examination of barriers to performance evaluation and subsequent tailoring of strategies to overcome these barriers should be undertaken to achieve the aims of performance evaluation. The findings of this review should inform the development of a standardised framework that can be used to measure and evaluate allied health performance. Future research should explore the utility and overall impact of such framework in allied health service delivery.

Evaluation of Ohio work zone speed zones process.

DOT National Transportation Integrated Search

2014-06-01

This report describes the methodology and results of analyses performed to determine the effectiveness of Ohio Department of Transportation processes for establishing work zone speed zones. Researchers observed motorists speed choice upstream of a...

Friction Stir Processing of Stainless Steel for Ascertaining Its Superlative Performance in Bioimplant Applications.

PubMed

Perumal, G; Ayyagari, A; Chakrabarti, A; Kannan, D; Pati, S; Grewal, H S; Mukherjee, S; Singh, S; Arora, H S

2017-10-25

Substrate-cell interactions for a bioimplant are driven by substrate's surface characteristics. In addition, the performance of an implant and resistance to degradation are primarily governed by its surface properties. A bioimplant typically degrades by wear and corrosion in the physiological environment, resulting in metallosis. Surface engineering strategies for limiting degradation of implants and enhancing their performance may reduce or eliminate the need for implant removal surgeries and the associated cost. In the current study, we tailored the surface properties of stainless steel using submerged friction stir processing (FSP), a severe plastic deformation technique. FSP resulted in significant microstructural refinement from 22 μm grain size for the as-received alloy to 0.8 μm grain size for the processed sample with increase in hardness by nearly 1.5 times. The wear and corrosion behavior of the processed alloy was evaluated in simulated body fluid. The processed sample demonstrated remarkable improvement in both wear and corrosion resistance, which is explained by surface strengthening and formation of a highly stable passive layer. The methylthiazol tetrazolium assay demonstrated that the processed sample is better in supporting cell attachment, proliferation with minimal toxicity, and hemolysis. The athrombogenic characteristic of the as-received and processed samples was evaluated by fibrinogen adsorption and platelet adhesion via the enzyme-linked immunosorbent assay and lactate dehydrogenase assay, respectively. The processed sample showed less platelet and fibrinogen adhesion compared with the as-received alloy, signifying its high thromboresistance. The current study suggests friction stir processing to be a versatile toolbox for enhancing the performance and reliability of currently used bioimplant materials.

Global and Local Evaluations of Public Speaking Performance in Social Anxiety

PubMed Central

Cody, Meghan W.; Teachman, Bethany A.

2012-01-01

Differences in the relative use of global and local information (seeing the forest versus the trees) may explain why people with social anxiety often do not benefit from corrective feedback, even though they pay close attention to details in social situations. In the current study, participants high (n = 43) or low (n = 47) in social anxiety symptoms gave a series of brief speeches, and then self-rated their speaking performance on items reflecting global and local performance indicators (self assessment) and also received standardized performance feedback from an experimenter. Participants then completed a questionnaire asking how they thought the experimenter would rate their performance based on the feedback provided (experimenter assessment). Participants completed the self and experimenter assessments again after three days, in addition to a measure of post-event processing (repetitive negative thinking) about their speech performance. Results showed that, as hypothesized, the high social anxiety group rated their performance more negatively than the low social anxiety group did. Moreover, the high social anxiety group’s ratings of global aspects of their performance became relatively more negative over time, compared to their ratings of local aspects and the low social anxiety group’s ratings. As expected, post-event processing mediated the relationship between social anxiety group status and worsening global performance evaluations. These findings point to a pattern of progressively more negative global evaluations over time for persons high in social anxiety. PMID:22035989

Management of the General Process of Parenteral Nutrition Using mHealth Technologies: Evaluation and Validation Study

PubMed Central

2018-01-01

Background Any system applied to the control of parenteral nutrition (PN) ought to prove that the process meets the established requirements and include a repository of records to allow evaluation of the information about PN processes at any time. Objective The goal of the research was to evaluate the mobile health (mHealth) app and validate its effectiveness in monitoring the management of the PN process. Methods We studied the evaluation and validation of the general process of PN using an mHealth app. The units of analysis were the PN bags prepared and administered at the Son Espases University Hospital, Palma, Spain, from June 1 to September 6, 2016. For the evaluation of the app, we used the Poststudy System Usability Questionnaire and subsequent analysis with the Cronbach alpha coefficient. Validation was performed by checking the compliance of control for all operations on each of the stages (validation and transcription of the prescription, preparation, conservation, and administration) and by monitoring the operative control points and critical control points. Results The results obtained from 387 bags were analyzed, with 30 interruptions of administration. The fulfillment of stages was 100%, including noncritical nonconformities in the storage control. The average deviation in the weight of the bags was less than 5%, and the infusion time did not present deviations greater than 1 hour. Conclusions The developed app successfully passed the evaluation and validation tests and was implemented to perform the monitoring procedures for the overall PN process. A new mobile solution to manage the quality and traceability of sensitive medicines such as blood-derivative drugs and hazardous drugs derived from this project is currently being deployed. PMID:29615389

Sustained Performance Review: A Threat to Academic Freedom?

ERIC Educational Resources Information Center

Hall, Daniel E.

1997-01-01

Reviews the history of the tenure system and its constitutional and due process implications. Describes Florida's sustained performance review program, an evaluation of tenured faculty every seven years to encourage continuing professional development. (SK)

FUEL-EFFICIENT SEWAGE SLUDGE INCINERATION

EPA Science Inventory

A study was performed to evaluate the status of incineration with low fuel use as a sludge disposal technology. The energy requirements, life-cycle costs, operation and maintenance requirements, and process capabilities of four sludge incineration facilities were evaluated. These...

Statistical analysis for validating ACO-KNN algorithm as feature selection in sentiment analysis

NASA Astrophysics Data System (ADS)

Ahmad, Siti Rohaidah; Yusop, Nurhafizah Moziyana Mohd; Bakar, Azuraliza Abu; Yaakub, Mohd Ridzwan

2017-10-01

This research paper aims to propose a hybrid of ant colony optimization (ACO) and k-nearest neighbor (KNN) algorithms as feature selections for selecting and choosing relevant features from customer review datasets. Information gain (IG), genetic algorithm (GA), and rough set attribute reduction (RSAR) were used as baseline algorithms in a performance comparison with the proposed algorithm. This paper will also discuss the significance test, which was used to evaluate the performance differences between the ACO-KNN, IG-GA, and IG-RSAR algorithms. This study evaluated the performance of the ACO-KNN algorithm using precision, recall, and F-score, which were validated using the parametric statistical significance tests. The evaluation process has statistically proven that this ACO-KNN algorithm has been significantly improved compared to the baseline algorithms. The evaluation process has statistically proven that this ACO-KNN algorithm has been significantly improved compared to the baseline algorithms. In addition, the experimental results have proven that the ACO-KNN can be used as a feature selection technique in sentiment analysis to obtain quality, optimal feature subset that can represent the actual data in customer review data.

Aerodynamic optimization of supersonic compressor cascade using differential evolution on GPU

NASA Astrophysics Data System (ADS)

Aissa, Mohamed Hasanine; Verstraete, Tom; Vuik, Cornelis

2016-06-01

Differential Evolution (DE) is a powerful stochastic optimization method. Compared to gradient-based algorithms, DE is able to avoid local minima but requires at the same time more function evaluations. In turbomachinery applications, function evaluations are performed with time-consuming CFD simulation, which results in a long, non affordable, design cycle. Modern High Performance Computing systems, especially Graphic Processing Units (GPUs), are able to alleviate this inconvenience by accelerating the design evaluation itself. In this work we present a validated CFD Solver running on GPUs, able to accelerate the design evaluation and thus the entire design process. An achieved speedup of 20x to 30x enabled the DE algorithm to run on a high-end computer instead of a costly large cluster. The GPU-enhanced DE was used to optimize the aerodynamics of a supersonic compressor cascade, achieving an aerodynamic loss minimization of 20%.

Aerodynamic optimization of supersonic compressor cascade using differential evolution on GPU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aissa, Mohamed Hasanine; Verstraete, Tom; Vuik, Cornelis

Differential Evolution (DE) is a powerful stochastic optimization method. Compared to gradient-based algorithms, DE is able to avoid local minima but requires at the same time more function evaluations. In turbomachinery applications, function evaluations are performed with time-consuming CFD simulation, which results in a long, non affordable, design cycle. Modern High Performance Computing systems, especially Graphic Processing Units (GPUs), are able to alleviate this inconvenience by accelerating the design evaluation itself. In this work we present a validated CFD Solver running on GPUs, able to accelerate the design evaluation and thus the entire design process. An achieved speedup of 20xmore » to 30x enabled the DE algorithm to run on a high-end computer instead of a costly large cluster. The GPU-enhanced DE was used to optimize the aerodynamics of a supersonic compressor cascade, achieving an aerodynamic loss minimization of 20%.« less

Flexible, secure agent development framework

DOEpatents

Goldsmith,; Steven, Y [Rochester, MN

2009-04-07

While an agent generator is generating an intelligent agent, it can also evaluate the data processing platform on which it is executing, in order to assess a risk factor associated with operation of the agent generator on the data processing platform. The agent generator can retrieve from a location external to the data processing platform an open site that is configurable by the user, and load the open site into an agent substrate, thereby creating a development agent with code development capabilities. While an intelligent agent is executing a functional program on a data processing platform, it can also evaluate the data processing platform to assess a risk factor associated with performing the data processing function on the data processing platform.

Separation of plastics: The importance of kinetics knowledge in the evaluation of froth flotation.

PubMed

Censori, Matteo; La Marca, Floriana; Carvalho, M Teresa

2016-08-01

Froth flotation is a promising technique to separate polymers of similar density. The present paper shows the need for performing kinetic tests to evaluate and optimize the process. In the experimental study, batch flotation tests were performed on samples of ABS and PS. The floated product was collected at increasing flotation time. Two variables were selected for modification: the concentration of the depressor (tannic acid) and airflow rate. The former is associated with the chemistry of the process and the latter with the transport of particles. It was shown that, like mineral flotation, plastics flotation can be adequately assumed as a first order rate process. The results of the kinetic tests showed that the kinetic parameters change with the operating conditions. When the depressing action is weak and the airflow rate is low, the kinetic is fast. Otherwise, the kinetic is slow and a variable percentage of the plastics never floats. Concomitantly, the time at which the maximum difference in the recovery of the plastics in the floated product is attained changes with the operating conditions. The prediction of flotation results, process evaluation and comparisons should be done considering the process kinetics. Copyright © 2016 Elsevier Ltd. All rights reserved.

"A Desire for Growth": Online Full-Time Faculty's Perceptions of Evaluation Processes

ERIC Educational Resources Information Center

DeCosta, Meredith; Bergquist, Emily; Holbeck, Rick

2015-01-01

Post-secondary educational institutions use various means to evaluate the teaching performance of faculty members. There are benefits to effective faculty evaluation, including advancing the scholarship of teaching and learning, as well as improving the functionality and innovation of courses, curriculum, departments, and ultimately the broader…

Mediators of Stereotype Threat Induced by Diagnostic Testing by Stereotype Relevant Out-Group Evaluators: The Roles of Evaluator's Racial Fairness and Support on Performance Outcome

ERIC Educational Resources Information Center

Wilburn, Grady Akile

2010-01-01

There is an abundance of research that examines the social-psychological phenomenon called stereotype threat. There is not, however, a conclusive understanding of the processes and mechanisms that operate within stereotype threat that produce reduced performance in a negative stereotype relevant area. This dissertation proposes that there are…

LSP Composite Susbtrate Destructive Evaluation Test Assessment Manual

NASA Technical Reports Server (NTRS)

Kovach, Daniel J.; Erickson, Grant J.

2013-01-01

This document specifies the processes to perform post-strike destructive damage evaluation of tested CFRP panels.It is recognized that many factors besides lightning damage protection are involved in the selection of an appropriate Lightning Strike Protection (LSP) for a particular system (e.g., cost, weight, corrosion resistance, shielding effectiveness, etc.). This document strives primarily to address the standardized generation of damage protection performance data.

Using Personnel Evaluation To Focus on the Development of Teaching Skills: Faculty Ideas and University Policy.

ERIC Educational Resources Information Center

O'Leary, Neil; Fenton, Ray

The role of the personnel evaluation process in improving the performance of teachers as classroom communicators is explored by contrasting the personnel evaluation system of Alaska Pacific University (APU) with that of the Anchorage School District (Alaska). While the APU system offers little specification for formative evaluation activities, the…

Impact of Salt Waste Processing Facility Streams on the Nitric-Glycolic Flowsheet in the Chemical Processing Cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martino, C.

An evaluation of the previous Chemical Processing Cell (CPC) testing was performed to determine whether the planned concurrent operation, or “coupled” operations, of the Defense Waste Processing Facility (DWPF) with the Salt Waste Processing Facility (SWPF) has been adequately covered. Tests with the nitricglycolic acid flowsheet, which were both coupled and uncoupled with salt waste streams, included several tests that required extended boiling times. This report provides the evaluation of previous testing and the testing recommendation requested by Savannah River Remediation. The focus of the evaluation was impact on flammability in CPC vessels (i.e., hydrogen generation rate, SWPF solvent components,more » antifoam degradation products) and processing impacts (i.e., acid window, melter feed target, rheological properties, antifoam requirements, and chemical composition).« less

Performability evaluation of the SIFT computer

NASA Technical Reports Server (NTRS)

Meyer, J. F.; Furchtgott, D. G.; Wu, L. T.

1979-01-01

Performability modeling and evaluation techniques are applied to the SIFT computer as it might operate in the computational evironment of an air transport mission. User-visible performance of the total system (SIFT plus its environment) is modeled as a random variable taking values in a set of levels of accomplishment. These levels are defined in terms of four attributes of total system behavior: safety, no change in mission profile, no operational penalties, and no economic process whose states describe the internal structure of SIFT as well as relavant conditions of the environment. Base model state trajectories are related to accomplishment levels via a capability function which is formulated in terms of a 3-level model hierarchy. Performability evaluation algorithms are then applied to determine the performability of the total system for various choices of computer and environment parameter values. Numerical results of those evaluations are presented and, in conclusion, some implications of this effort are discussed.

A Spike Cocktail Approach to Improve Microbial Performance ...

EPA Pesticide Factsheets

Water reuse, via either centralized treatment of traditional wastewater or decentralized treatment and on-site reuse, is becoming an increasingly important element of sustainable water management. Despite advances in waterborne pathogen detection methods, low and highly variable pathogen levels limit their utility for routine evaluation of health risks in water reuse systems. Therefore, there is a need to improve our understanding of the linkage between pathogens and more readily measured process indicators during treatment. This paper describes an approach for constructing spiking experiments to relate the behavior of viral, bacterial, and protozoan pathogens with relevant process indicators. General issues are reviewed, and the spiking protocol is applied as a case study example to improve microbial performance monitoring and health risk evaluation in a water reuse system. This approach provides a foundation for the development of novel approaches to improve real or near-real time performance monitoring of water recycling systems. This manuscrupt details an approach for developing "spike cocktail", a mixture of microorganisms that can be used to evaluate the performance of engineered and natural systems.

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human performance issues, a combined macro-micro ergonomic methodology is essential to solve the productivity, quality and safety issues impacting employees along the trajectory or path of the enterprise-wide work process. In this study, the symptoms associated with human performance issues in one production department work process had root causes originating in the customer service department work process. In fact, the issues found in the customer service department caused performance problems elsewhere in the enterprise-wide work process such as the traffic department. Sustainable enterprise solutions for workplace human performance require the integration of macro- and micro-ergonomic approaches.

Implementation of Performance Assessment in STEM (Science, Technology, Engineering, Mathematics) Education to Detect Science Process Skill

NASA Astrophysics Data System (ADS)

Septiani, A.; Rustaman, N. Y.

2017-02-01

A descriptive study about the implementation of performance assessment in STEM based instruction was carried out to investigate the tenth grade of Vocational school students’ science process skills during the teaching learning processes. A number of tenth grade agriculture students was involved as research subjects selected through cluster random sampling technique (n=35). Performance assessment was planned on skills during the teaching learning process through observation and on product resulted from their engineering practice design. The procedure conducted in this study included thinking phase (identifying problem and sharing idea), designing phase, construction phase, and evaluation phase. Data was collected through the use of science process skills (SPS) test, observation sheet on student activity, as well as tasks and rubrics for performance assessment during the instruction. Research findings show that the implementation of performance assessment in STEM education in planting media could detect students science process skills better from the observation individually compared through SPS test. It was also found that the result of performance assessment was diverse when it was correlated to each indicator of SPS (strong and positive; weak and positive).

HANDBOOK ON ADVANCED PHOTOCHEMICAL OXIDATION PROCESSES

EPA Science Inventory

This handbook summarizes commercial-scale system performance and cost data for advanced photochemical oxidation (APO) treatment of contaminated water, air, and solids. Similar information from pilot- and bench-scale evaluations of APO processes is also included to supplement the...

Learner Performance Accounting: A Tri-Cycle Process

ERIC Educational Resources Information Center

Brown, Thomas C.; McCleary, Lloyd E.

1973-01-01

The Tri-Cycle Process described in the model permits for the first time an integrated system for designing an individualized instructional system that would permit a rational, diagnosis-prescription-evaluation system keyed to an accounting system. (Author)

Evaluation method of membrane performance in membrane distillation process for seawater desalination.

PubMed

Chung, Seungjoon; Seo, Chang Duck; Choi, Jae-Hoon; Chung, Jinwook

2014-01-01

Membrane distillation (MD) is an emerging desalination technology as an energy-saving alternative to conventional distillation and reverse osmosis method. The selection of appropriate membrane is a prerequisite for the design of an optimized MD process. We proposed a simple approximation method to evaluate the performance of membranes for MD process. Three hollow fibre-type commercial membranes with different thicknesses and pore sizes were tested. Experimental results showed that one membrane was advantageous due to the highest flux, whereas another membrane was due to the lowest feed temperature drop. Regression analyses and multi-stage calculations were used to account for the trade-offeffects of flux and feed temperature drop. The most desirable membrane was selected from tested membranes in terms of the mean flux in a multi-stage process. This method would be useful for the selection of the membranes without complicated simulation techniques.

Effect of chemical pretreatments on corn stalk bagasse as immobilizing carrier of Clostridium acetobutylicum in the performance of a fermentation-pervaporation coupled system.

PubMed

Cai, Di; Li, Ping; Chen, Changjing; Wang, Yong; Hu, Song; Cui, Caixia; Qin, Peiyong; Tan, Tianwei

2016-11-01

In this study, different pretreatment methods were evaluated for modified the corn stalk bagasse and further used the pretreated bagasse as immobilized carrier in acetone-butanol-ethanol fermentation process. Structural changes of the bagasses pretreated by different methods were analyzed by Fourier transform infrared, crystallinity index and scanning pictures by electron microscope. And the performances of batch fermentation using the corn stalk based carriers were evaluated. Results indicated that the highest ABE concentration of 23.86g/L was achieved using NaOH pretreated carrier in batch fermentation. Immobilized fermentation-pervaporation integration process was further carried out. The integration process showed long-term stability with 225-394g/L of ABE solvents on the permeate side of pervaporation membrane. This novel integration process was found to be an efficient method for biobutanol production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Limits of thermochemical and photochemical syntheses of gaseous fuels: a finite-time thermodynamic analysis. Annual report, September 1983-February, 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, R.S.

The objectives of this project are to develop methods for the evaluation of syntheses of gaseous fuels in terms of their optimum possible performance, particularly when they are required to supply those fuels at nonzero rates. The first objective is entirely in the tradition of classical thermodynamics, the processes, given the characteristics and constraints that define them. The new element which this project introduces is the capability to set limits more realistic than those from classical thermodynamics, by the inclusion of the influence of the rate or duration of a process on its performance. The development of these analyses ismore » a natural step in the evolution represented by the evaluative papers of Appendix IV, e.g., by Funk et al., Abraham, Shinnar, Bilgen and Fletcher. A second objective is to determine how any given process should be carried out, within its constraints, in order to yield its optimum performance and to use this information whenever possible to help guide the design of that process.« less

Development of a Paradigm to Assess Nutritive and Biochemical Substances in Humans: A Preliminary Report on the Effects of Tyrosine upon Altitude- and Cold-Induced Stress Responses

DTIC Science & Technology

1987-03-01

3/4 hours. Performance tests evaluated simple and choice reaction time to visual stimuli, vigilance, and processing of symbolic, numerical, verbal...minimize the adverse consequences of these stressors. Tyrosine enhanced performance (e.g. complex information processing , vigilance, and reaction time... processes inherent in many real-world tasks. For example, Map Compass requires association of Wsi PL AFCm uA O-SV CHETCLtISS) direction and degree

Performance and techno-economic assessment of several solid-liquid separation technologies for processing dilute-acid pretreated corn stover.

PubMed

Sievers, David A; Tao, Ling; Schell, Daniel J

2014-09-01

Solid-liquid separation of pretreated lignocellulosic biomass slurries is a critical unit operation employed in several different processes for production of fuels and chemicals. An effective separation process achieves good recovery of solute (sugars) and efficient dewatering of the biomass slurry. Dilute acid pretreated corn stover slurries were subjected to pressure and vacuum filtration and basket centrifugation to evaluate the technical and economic merits of these technologies. Experimental performance results were used to perform detailed process simulations and economic analysis using a 2000 tonne/day biorefinery model to determine differences between the various filtration methods and their process settings. The filtration processes were able to successfully separate pretreated slurries into liquor and solid fractions with estimated sugar recoveries of at least 95% using a cake washing process. A continuous vacuum belt filter produced the most favorable process economics. Copyright © 2014 Elsevier Ltd. All rights reserved.

Collection, processing and dissemination of data for the national solar demonstration program

NASA Technical Reports Server (NTRS)

Day, R. E.; Murphy, L. J.; Smok, J. T.

1978-01-01

A national solar data system developed for the DOE by IBM provides for automatic gathering, conversion, transfer, and analysis of demonstration site data. NASA requirements for this system include providing solar site hardware, engineering, data collection, and analysis. The specific tasks include: (1) solar energy system design/integration; (2) developing a site data acquisition subsystem; (3) developing a central data processing system; (4) operating the test facility at Marshall Space Flight Center; (5) collecting and analyzing data. The systematic analysis and evaluation of the data from the National Solar Data System is reflected in a monthly performance report and a solar energy system performance evaluation report.

Developing Statistical Models to Assess Transplant Outcomes Using National Registries: The Process in the United States.

PubMed

Snyder, Jon J; Salkowski, Nicholas; Kim, S Joseph; Zaun, David; Xiong, Hui; Israni, Ajay K; Kasiske, Bertram L

2016-02-01

Created by the US National Organ Transplant Act in 1984, the Scientific Registry of Transplant Recipients (SRTR) is obligated to publicly report data on transplant program and organ procurement organization performance in the United States. These reports include risk-adjusted assessments of graft and patient survival, and programs performing worse or better than expected are identified. The SRTR currently maintains 43 risk adjustment models for assessing posttransplant patient and graft survival and, in collaboration with the SRTR Technical Advisory Committee, has developed and implemented a new systematic process for model evaluation and revision. Patient cohorts for the risk adjustment models are identified, and single-organ and multiorgan transplants are defined, then each risk adjustment model is developed following a prespecified set of steps. Model performance is assessed, the model is refit to a more recent cohort before each evaluation cycle, and then it is applied to the evaluation cohort. The field of solid organ transplantation is unique in the breadth of the standardized data that are collected. These data allow for quality assessment across all transplant providers in the United States. A standardized process of risk model development using data from national registries may enhance the field.

Plant-wide (BSM2) evaluation of reject water treatment with a SHARON-Anammox process.

PubMed

Volcke, E I P; Gernaey, K V; Vrecko, D; Jeppsson, U; van Loosdrecht, M C M; Vanrolleghem, P A

2006-01-01

In wastewater treatment plants (WWTPs) equipped with sludge digestion and dewatering systems, the reject water originating from these facilities contributes significantly to the nitrogen load of the activated sludge tanks, to which it is typically recycled. In this paper, the impact of reject water streams on the performance of a WWTP is assessed in a simulation study, using the Benchmark Simulation Model no. 2 (BSM2), that includes the processes describing sludge treatment and in this way allows for plant-wide evaluation. Comparison of performance of a WWTP without reject water with a WWTP where reject water is recycled to the primary clarifier, i.e. the BSM2 plant, shows that the ammonium load of the influent to the primary clarifier is 28% higher in the case of reject water recycling. This results in violation of the effluent total nitrogen limit. In order to relieve the main wastewater treatment plant, reject water treatment with a combined SHARON-Anammox process seems a promising option. The simulation results indicate that significant improvements of the effluent quality of the main wastewater treatment plant can be realized. An economic evaluation of the different scenarios is performed using an Operating Cost Index (OCI).

Metrology for Fuel Cell Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stocker, Michael; Stanfield, Eric

2015-02-04

The project was divided into three subprojects. The first subproject is Fuel Cell Manufacturing Variability and Its Impact on Performance. The objective was to determine if flow field channel dimensional variability has an impact on fuel cell performance. The second subproject is Non-contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks. The objective was to enable cost reduction in the manufacture of fuel cell plates by providing a rapid non-contact measurement system for in-line process control. The third subproject is Optical Scatterfield Metrology for Online Catalyst Coating Inspection of PEM Soft Goods. Themore » objective was to evaluate the suitability of Optical Scatterfield Microscopy as a viable measurement tool for in situ process control of catalyst coatings.« less

Hadamard Transform Time-of-Flight Mass Spectrometry

DTIC Science & Technology

2004-11-30

computer. This rather slow process -. 12 allowed us to evaluate different methods of -M processing the data prior to performing the 4- - inverse transform . The...DSK6713 is capable of • o , , performing the inverse transform and this would 0 & 10 Time (ms,)’ 5 20 25 be the preferred mode of operation since...treating the raw data prior to performing the -20"d Loutled patern inverse transform . We expected that noise associated 0-with the pulsing of the Bradbury

Extended performance solar electric propulsion thrust system study. Volume 4: Thruster technology evaluation

NASA Technical Reports Server (NTRS)

Poeschel, R. L.; Hawthorne, E. I.; Weisman, Y. C.; Frisman, M.; Benson, G. C.; Mcgrath, R. J.; Martinelli, R. M.; Linsenbardt, T. L.; Beattie, J. R.

1977-01-01

Several thrust system design concepts were evaluated and compared using the specifications of the most advanced 30 cm engineering model thruster as the technology base. Emphasis was placed on relatively high power missions (60 to 100 kW) such as a Halley's comet rendezvous. The extensions in thruster performance required for the Halley's comet mission were defined and alternative thrust system concepts were designed in sufficient detail for comparing mass, efficiency, reliability, structure, and thermal characteristics. Confirmation testing and analysis of thruster and power processing components were performed, and the feasibility of satisfying extended performance requirements was verified. A baseline design was selected from the alternatives considered, and the design analysis and documentation were refined. The baseline thrust system design features modular construction, conventional power processing, and a concentrator solar array concept and is designed to interface with the Space Shuttle.

Modulation of the brain activity in outcome evaluation by the presence of an audience: An electrophysiological investigation.

PubMed

Tian, Tengxiang; Feng, Xue; Gu, Ruolei; Broster, Lucas S; Feng, Chunliang; Wang, Lili; Guan, Qing; Luo, Yue-Jia

2015-07-30

The audience effect refers to the phenomenon that one׳s performance on a task is affected by the presence of others. Here we investigated how the audience effect modulates the neurocognitive signatures underlying people׳s evaluation of their own task performance/outcome. Participants in our study played a gambling game in two social contexts: an "audience" condition and an "alone" condition. The presence of others modulated the feedback-related negativity (FRN), which might reflect enhanced motivational significance or increased reward processing when participants were watched compared to when they were alone. We also observed increased P300 responses to outcome feedback in the audience condition, presumably reflecting more elaborative and sustained evaluation of outcomes in the audience than alone context. This audience effect on the evaluative processes complements previous observations on the social nature of outcome evaluation and extends a traditional topic in social psychology to the neuroscientific field. Copyright © 2015 Elsevier B.V. All rights reserved.

Development and evaluation of an intelligent traceability system for frozen tilapia fillet processing.

PubMed

Xiao, Xinqing; Fu, Zetian; Qi, Lin; Mira, Trebar; Zhang, Xiaoshuan

2015-10-01

The main export varieties in China are brand-name, high-quality bred aquatic products. Among them, tilapia has become the most important and fast-growing species since extensive consumer markets in North America and Europe have evolved as a result of commodity prices, year-round availability and quality of fresh and frozen products. As the largest tilapia farming country, China has over one-third of its tilapia production devoted to further processing and meeting foreign market demand. Using by tilapia fillet processing, this paper introduces the efforts for developing and evaluating ITS-TF: an intelligent traceability system integrated with statistical process control (SPC) and fault tree analysis (FTA). Observations, literature review and expert questionnaires were used for system requirement and knowledge acquisition; scenario simulation was applied to evaluate and validate ITS-TF performance. The results show that traceability requirement is evolved from a firefighting model to a proactive model for enhancing process management capacity for food safety; ITS-TF transforms itself as an intelligent system to provide functions on early warnings and process management by integrated SPC and FTA. The valuable suggestion that automatic data acquisition and communication technology should be integrated into ITS-TF was achieved for further system optimization, perfection and performance improvement. © 2014 Society of Chemical Industry.

PrismTech Data Distribution Service Java API Evaluation

NASA Technical Reports Server (NTRS)

Riggs, Cortney

2008-01-01

My internship duties with Launch Control Systems required me to start performance testing of an Object Management Group's (OMG) Data Distribution Service (DDS) specification implementation by PrismTech Limited through the Java programming language application programming interface (API). DDS is a networking middleware for Real-Time Data Distribution. The performance testing involves latency, redundant publishers, extended duration, redundant failover, and read performance. Time constraints allowed only for a data throughput test. I have designed the testing applications to perform all performance tests when time is allowed. Performance evaluation data such as megabits per second and central processing unit (CPU) time consumption were not easily attainable through the Java programming language; they required new methods and classes created in the test applications. Evaluation of this product showed the rate that data can be sent across the network. Performance rates are better on Linux platforms than AIX and Sun platforms. Compared to previous C++ programming language API, the performance evaluation also shows the language differences for the implementation. The Java API of the DDS has a lower throughput performance than the C++ API.

Embodied simulation as part of affective evaluation processes: task dependence of valence concordant EMG activity.

PubMed

Weinreich, André; Funcke, Jakob Maria

2014-01-01

Drawing on recent findings, this study examines whether valence concordant electromyography (EMG) responses can be explained as an unconditional effect of mere stimulus processing or as somatosensory simulation driven by task-dependent processing strategies. While facial EMG over the Corrugator supercilii and the Zygomaticus major was measured, each participant performed two tasks with pictures of album covers. One task was an affective evaluation task and the other was to attribute the album covers to one of five decades. The Embodied Emotion Account predicts that valence concordant EMG is more likely to occur if the task necessitates a somatosensory simulation of the evaluative meaning of stimuli. Results support this prediction with regard to Corrugator supercilii in that valence concordant EMG activity was only present in the affective evaluation task but not in the non-evaluative task. Results for the Zygomaticus major were ambiguous. Our findings are in line with the view that EMG activity is an embodied part of the evaluation process and not a mere physical outcome.

Process economics of renewable biorefineries: butanol and ethanol production in integrated bioprocesses from lignocellulosics and other industrial by-products

USDA-ARS?s Scientific Manuscript database

This chapter provides process economic details on production of butanol from lignocellulosic biomass and glycerol in integrated bioreactors where numerous unit operations are combined. In order to compare various processes, economic evaluations were performed using SuperPro Designer Software (versio...

Teaching Process Design through Integrated Process Synthesis

ERIC Educational Resources Information Center

Metzger, Matthew J.; Glasser, Benjamin J.; Patel, Bilal; Hildebrandt, Diane; Glasser, David

2012-01-01

The design course is an integral part of chemical engineering education. A novel approach to the design course was recently introduced at the University of the Witwatersrand, Johannesburg, South Africa. The course aimed to introduce students to systematic tools and techniques for setting and evaluating performance targets for processes, as well as…

Evolution of evaluation criteria in the College of American Pathologists Surveys.

PubMed

Ross, J W

1988-04-01

This review of the evolution of evaluation criteria in the College of American Pathologists Survey and of theoretical grounds proposed for evaluation criteria explores the complex nature of the evaluation process. Survey professionals balance multiple variables to seek relevant and meaningful evaluations. These include the state of the art, the reliability of target values, the nature of available control materials, the perceived medical "nonusefulness" of the extremes of performance (good or poor), this extent of laboratory services provided, and the availability of scientific data and theory by which clinically relevant criteria of medical usefulness may be established. The evaluation process has consistently sought peer concensus, to stimulate improvement in state of the art, to increase medical usefulness, and to monitor the state of the art. Recent factors that are likely to promote change from peer group evaluation to fixed criteria evaluation are the high degree of proficiency in the state of the art for many analytes, accurate target values, increased knowledge of biologic variation, and the availability of statistical modeling techniques simulating biologic and diagnostic processes as well as analytic processes.

Initiating statistical process control to improve quality outcomes in colorectal surgery.

PubMed

Keller, Deborah S; Stulberg, Jonah J; Lawrence, Justin K; Samia, Hoda; Delaney, Conor P

2015-12-01

Unexpected variations in postoperative length of stay (LOS) negatively impact resources and patient outcomes. Statistical process control (SPC) measures performance, evaluates productivity, and modifies processes for optimal performance. The goal of this study was to initiate SPC to identify LOS outliers and evaluate its feasibility to improve outcomes in colorectal surgery. Review of a prospective database identified colorectal procedures performed by a single surgeon. Patients were grouped into elective and emergent categories and then stratified by laparoscopic and open approaches. All followed a standardized enhanced recovery protocol. SPC was applied to identify outliers and evaluate causes within each group. A total of 1294 cases were analyzed--83% elective (n = 1074) and 17% emergent (n = 220). Emergent cases were 70.5% open and 29.5% laparoscopic; elective cases were 36.8% open and 63.2% laparoscopic. All groups had a wide range in LOS. LOS outliers ranged from 8.6% (elective laparoscopic) to 10.8% (emergent laparoscopic). Evaluation of outliers demonstrated patient characteristics of higher ASA scores, longer operating times, ICU requirement, and temporary nursing at discharge. Outliers had higher postoperative complication rates in elective open (57.1 vs. 20.0%) and elective lap groups (77.6 vs. 26.1%). Outliers also had higher readmission rates for emergent open (11.4 vs. 5.4%), emergent lap (14.3 vs. 9.2%), and elective lap (32.8 vs. 6.9%). Elective open outliers did not follow trends of longer LOS or higher reoperation rates. SPC is feasible and promising for improving colorectal surgery outcomes. SPC identified patient and process characteristics associated with increased LOS. SPC may allow real-time outlier identification, during quality improvement efforts, and reevaluation of outcomes after introducing process change. SPC has clinical implications for improving patient outcomes and resource utilization.

Plan delivery quality assurance for CyberKnife: Statistical process control analysis of 350 film-based patient-specific QAs.

PubMed

Bellec, J; Delaby, N; Jouyaux, F; Perdrieux, M; Bouvier, J; Sorel, S; Henry, O; Lafond, C

2017-07-01

Robotic radiosurgery requires plan delivery quality assurance (DQA) but there has never been a published comprehensive analysis of a patient-specific DQA process in a clinic. We proposed to evaluate 350 consecutive film-based patient-specific DQAs using statistical process control. We evaluated the performance of the process to propose achievable tolerance criteria for DQA validation and we sought to identify suboptimal DQA using control charts. DQAs were performed on a CyberKnife-M6 using Gafchromic-EBT3 films. The signal-to-dose conversion was performed using a multichannel-correction and a scanning protocol that combined measurement and calibration in a single scan. The DQA analysis comprised a gamma-index analysis at 3%/1.5mm and a separate evaluation of spatial and dosimetric accuracy of the plan delivery. Each parameter was plotted on a control chart and control limits were calculated. A capability index (Cpm) was calculated to evaluate the ability of the process to produce results within specifications. The analysis of capability showed that a gamma pass rate of 85% at 3%/1.5mm was highly achievable as acceptance criteria for DQA validation using a film-based protocol (Cpm>1.33). 3.4% of DQA were outside a control limit of 88% for gamma pass-rate. The analysis of the out-of-control DQA helped identify a dosimetric error in our institute for a specific treatment type. We have defined initial tolerance criteria for DQA validations. We have shown that the implementation of a film-based patient-specific DQA protocol with the use of control charts is an effective method to improve patient treatment safety on CyberKnife. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Modeling and Evaluating Pilot Performance in NextGen: Review of and Recommendations Regarding Pilot Modeling Efforts, Architectures, and Validation Studies

NASA Technical Reports Server (NTRS)

Wickens, Christopher; Sebok, Angelia; Keller, John; Peters, Steve; Small, Ronald; Hutchins, Shaun; Algarin, Liana; Gore, Brian Francis; Hooey, Becky Lee; Foyle, David C.

2013-01-01

NextGen operations are associated with a variety of changes to the national airspace system (NAS) including changes to the allocation of roles and responsibilities among operators and automation, the use of new technologies and automation, additional information presented on the flight deck, and the entire concept of operations (ConOps). In the transition to NextGen airspace, aviation and air operations designers need to consider the implications of design or system changes on human performance and the potential for error. To ensure continued safety of the NAS, it will be necessary for researchers to evaluate design concepts and potential NextGen scenarios well before implementation. One approach for such evaluations is through human performance modeling. Human performance models (HPMs) provide effective tools for predicting and evaluating operator performance in systems. HPMs offer significant advantages over empirical, human-in-the-loop testing in that (1) they allow detailed analyses of systems that have not yet been built, (2) they offer great flexibility for extensive data collection, (3) they do not require experimental participants, and thus can offer cost and time savings. HPMs differ in their ability to predict performance and safety with NextGen procedures, equipment and ConOps. Models also vary in terms of how they approach human performance (e.g., some focus on cognitive processing, others focus on discrete tasks performed by a human, while others consider perceptual processes), and in terms of their associated validation efforts. The objectives of this research effort were to support the Federal Aviation Administration (FAA) in identifying HPMs that are appropriate for predicting pilot performance in NextGen operations, to provide guidance on how to evaluate the quality of different models, and to identify gaps in pilot performance modeling research, that could guide future research opportunities. This research effort is intended to help the FAA evaluate pilot modeling efforts and select the appropriate tools for future modeling efforts to predict pilot performance in NextGen operations.

Performance Feedback Processing Is Positively Biased As Predicted by Attribution Theory.

PubMed

Korn, Christoph W; Rosenblau, Gabriela; Rodriguez Buritica, Julia M; Heekeren, Hauke R

2016-01-01

A considerable literature on attribution theory has shown that healthy individuals exhibit a positivity bias when inferring the causes of evaluative feedback on their performance. They tend to attribute positive feedback internally (e.g., to their own abilities) but negative feedback externally (e.g., to environmental factors). However, all empirical demonstrations of this bias suffer from at least one of the three following drawbacks: First, participants directly judge explicit causes for their performance. Second, participants have to imagine events instead of experiencing them. Third, participants assess their performance only after receiving feedback and thus differences in baseline assessments cannot be excluded. It is therefore unclear whether the classically reported positivity bias generalizes to setups without these drawbacks. Here, we aimed at establishing the relevance of attributions for decision-making by showing an attribution-related positivity bias in a decision-making task. We developed a novel task, which allowed us to test how participants changed their evaluations in response to positive and negative feedback about performance. Specifically, we used videos of actors expressing different facial emotional expressions. Participants were first asked to evaluate the actors' credibility in expressing a particular emotion. After this initial rating, participants performed an emotion recognition task and did--or did not--receive feedback on their veridical performance. Finally, participants re-rated the actors' credibility, which provided a measure of how they changed their evaluations after feedback. Attribution theory predicts that participants change their evaluations of the actors' credibility toward the positive after receiving positive performance feedback and toward the negative after negative performance feedback. Our results were in line with this prediction. A control condition without feedback showed that correct or incorrect performance alone could not explain the observed positivity bias. Furthermore, participants' behavior in our task was linked to the most widely used measure of attribution style. In sum, our findings suggest that positive and negative performance feedback influences the evaluation of task-related stimuli, as predicted by attribution theory. Therefore, our study points to the relevance of attribution theory for feedback processing in decision-making and provides a novel outlook for decision-making biases.

Performance Feedback Processing Is Positively Biased As Predicted by Attribution Theory

PubMed Central

Rodriguez Buritica, Julia M.; Heekeren, Hauke R.

2016-01-01

A considerable literature on attribution theory has shown that healthy individuals exhibit a positivity bias when inferring the causes of evaluative feedback on their performance. They tend to attribute positive feedback internally (e.g., to their own abilities) but negative feedback externally (e.g., to environmental factors). However, all empirical demonstrations of this bias suffer from at least one of the three following drawbacks: First, participants directly judge explicit causes for their performance. Second, participants have to imagine events instead of experiencing them. Third, participants assess their performance only after receiving feedback and thus differences in baseline assessments cannot be excluded. It is therefore unclear whether the classically reported positivity bias generalizes to setups without these drawbacks. Here, we aimed at establishing the relevance of attributions for decision-making by showing an attribution-related positivity bias in a decision-making task. We developed a novel task, which allowed us to test how participants changed their evaluations in response to positive and negative feedback about performance. Specifically, we used videos of actors expressing different facial emotional expressions. Participants were first asked to evaluate the actors’ credibility in expressing a particular emotion. After this initial rating, participants performed an emotion recognition task and did—or did not—receive feedback on their veridical performance. Finally, participants re-rated the actors’ credibility, which provided a measure of how they changed their evaluations after feedback. Attribution theory predicts that participants change their evaluations of the actors’ credibility toward the positive after receiving positive performance feedback and toward the negative after negative performance feedback. Our results were in line with this prediction. A control condition without feedback showed that correct or incorrect performance alone could not explain the observed positivity bias. Furthermore, participants’ behavior in our task was linked to the most widely used measure of attribution style. In sum, our findings suggest that positive and negative performance feedback influences the evaluation of task-related stimuli, as predicted by attribution theory. Therefore, our study points to the relevance of attribution theory for feedback processing in decision-making and provides a novel outlook for decision-making biases. PMID:26849646

Development of an Online Toolkit for Measuring Performance in Health Emergency Response Exercises.

PubMed

Agboola, Foluso; Bernard, Dorothy; Savoia, Elena; Biddinger, Paul D

2015-10-01

Exercises that simulate emergency scenarios are accepted widely as an essential component of a robust Emergency Preparedness program. Unfortunately, the variability in the quality of the exercises conducted, and the lack of standardized processes to measure performance, has limited the value of exercises in measuring preparedness. In order to help health organizations improve the quality and standardization of the performance data they collect during simulated emergencies, a model online exercise evaluation toolkit was developed using performance measures tested in over 60 Emergency Preparedness exercises. The exercise evaluation toolkit contains three major components: (1) a database of measures that can be used to assess performance during an emergency response exercise; (2) a standardized data collection tool (form); and (3) a program that populates the data collection tool with the measures that have been selected by the user from the database. The evaluation toolkit was pilot tested from January through September 2014 in collaboration with 14 partnering organizations representing 10 public health agencies and four health care agencies from eight states across the US. Exercise planners from the partnering organizations were asked to use the toolkit for their exercise evaluation process and were interviewed to provide feedback on the use of the toolkit, the generated evaluation tool, and the usefulness of the data being gathered for the development of the exercise after-action report. Ninety-three percent (93%) of exercise planners reported that they found the online database of performance measures appropriate for the creation of exercise evaluation forms, and they stated that they would use it again for future exercises. Seventy-two percent (72%) liked the exercise evaluation form that was generated from the toolkit, and 93% reported that the data collected by the use of the evaluation form were useful in gauging their organization's performance during the exercise. Seventy-nine percent (79%) of exercise planners preferred the evaluation form generated by the toolkit to other forms of evaluations. Results of this project show that users found the newly developed toolkit to be user friendly and more relevant to measurement of specific public health and health care capabilities than other tools currently available. The developed toolkit may contribute to the further advancement of developing a valid approach to exercise performance measurement.

In situ steam enhanced recovery process, Hughes Environmental Systems, Inc. innovative technology evaluation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, K.

1995-01-01

This Innovative Technology Evaluation report summarizes the findings of an evaluation of the in situ Steam Enhanced Recovery Process (SERP) operated by Hughes Environmental Systems, Inc. at the Rainbow Disposal facility in Huntington Beach, California. The technology demonstration was conducted concurrent with a full-scale remedial action using the technology on an underground diesel leak. From this demonstration, it was concluded that the SERP process did not achieve the remedial goals desired at this site and there were significant operational problems. It is believed that these operational problems can be solved and substantially better performance can be attained. The cost ofmore » treatment was quite low, as expected with an in-situ process.« less

Quicker, slicker, and better? An evaluation of a web-based human resource management system

NASA Astrophysics Data System (ADS)

Gibb, Stephen; McBride, Andrew

2001-10-01

This paper reviews the design and development of a web based Human Resource Management (HRM) system which has as its foundation a 'capability profiler' tool for analysing individual or team roles in organisations. This provides a foundation for managing a set of integrated activities in recruitment and selection, performance and career management, and training and development for individuals, teams, and whole organisations. The challenges of representing and processing information about the human side of organisation encountered in the design and implementation of such systems are evident. There is a combination of legal, practical, technical and philosophical issues to be faced in the processes of defining roles, selecting staff, monitoring and managing the performance of employees in the design and implementation of such systems. The strengths and weaknesses of web based systems in this context are evaluated. This evaluation highlights both the potential, given the evolution of broader Enterprise Resource Planning (ERP) systems and strategies in manufacturing, and concerns about the migration of HRM processes to such systems.

GANViz: A Visual Analytics Approach to Understand the Adversarial Game.

PubMed

Wang, Junpeng; Gou, Liang; Yang, Hao; Shen, Han-Wei

2018-06-01

Generative models bear promising implications to learn data representations in an unsupervised fashion with deep learning. Generative Adversarial Nets (GAN) is one of the most popular frameworks in this arena. Despite the promising results from different types of GANs, in-depth understanding on the adversarial training process of the models remains a challenge to domain experts. The complexity and the potential long-time training process of the models make it hard to evaluate, interpret, and optimize them. In this work, guided by practical needs from domain experts, we design and develop a visual analytics system, GANViz, aiming to help experts understand the adversarial process of GANs in-depth. Specifically, GANViz evaluates the model performance of two subnetworks of GANs, provides evidence and interpretations of the models' performance, and empowers comparative analysis with the evidence. Through our case studies with two real-world datasets, we demonstrate that GANViz can provide useful insight into helping domain experts understand, interpret, evaluate, and potentially improve GAN models.

Probabilistic Evaluation of Advanced Ceramic Matrix Composite Structures

NASA Technical Reports Server (NTRS)

Abumeri, Galib H.; Chamis, Christos C.

2003-01-01

The objective of this report is to summarize the deterministic and probabilistic structural evaluation results of two structures made with advanced ceramic composites (CMC): internally pressurized tube and uniformly loaded flange. The deterministic structural evaluation includes stress, displacement, and buckling analyses. It is carried out using the finite element code MHOST, developed for the 3-D inelastic analysis of structures that are made with advanced materials. The probabilistic evaluation is performed using the integrated probabilistic assessment of composite structures computer code IPACS. The affects of uncertainties in primitive variables related to the material, fabrication process, and loadings on the material property and structural response behavior are quantified. The primitive variables considered are: thermo-mechanical properties of fiber and matrix, fiber and void volume ratios, use temperature, and pressure. The probabilistic structural analysis and probabilistic strength results are used by IPACS to perform reliability and risk evaluation of the two structures. The results will show that the sensitivity information obtained for the two composite structures from the computational simulation can be used to alter the design process to meet desired service requirements. In addition to detailed probabilistic analysis of the two structures, the following were performed specifically on the CMC tube: (1) predicted the failure load and the buckling load, (2) performed coupled non-deterministic multi-disciplinary structural analysis, and (3) demonstrated that probabilistic sensitivities can be used to select a reduced set of design variables for optimization.

Communicating with Faculty Using a Diagnostic Performance Appraisal Process.

ERIC Educational Resources Information Center

Gibson, Ken

In spite of the many teacher evaluation models available and the extensive research on performance appraisal, few community colleges have effectively come to terms with this difficult task. Many administrators prefer to avoid the interpersonal conflict and the possible legal ramifications of performance appraisal. However, in times of limited…

77 FR 51762 - Proposed Information Collection; Comment Request; Economic Surveys for U.S. Commercial Fisheries

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... through primary processing; (2) to analyze the economic performance effects of current management measures; and (3) to analyze the economic performance effects of alternative management measures. The measures... used to track economic performance and to evaluate the economic effects of alternative management...

Evaluation of Data Processing Techniques for Unobtrusive Gait Authentication

DTIC Science & Technology

2014-03-01

scatter plot depicting the performance of kNN , by TER, on all experimental mixtures...30  Table 9.  Mean TER of SVM and kNN performance with different voting parameters...performance on XYZ-axis data. ...........................................................51  Table 19.  kNN and SVM results in back pocket carrying

Apollo experience report: Communications system flight evaluation and verification

NASA Technical Reports Server (NTRS)

Travis, D.; Royston, C. L., Jr.

1972-01-01

Flight tests of the synergetic operation of the spacecraft and earth based communications equipment were accomplished during Apollo missions AS-202 through Apollo 12. The primary goals of these tests were to verify that the communications system would adequately support lunar landing missions and to establish the inflight communications system performance characteristics. To attain these goals, a communications system flight verification and evaluation team was established. The concept of the team operations, the evolution of the evaluation processes, synopses of the team activities associated with each mission, and major conclusions and recommendations resulting from the performance evaluation are represented.

Develop Advanced Nonlinear Signal Analysis Topographical Mapping System

NASA Technical Reports Server (NTRS)

Jong, Jen-Yi

1997-01-01

During the development of the SSME, a hierarchy of advanced signal analysis techniques for mechanical signature analysis has been developed by NASA and AI Signal Research Inc. (ASRI) to improve the safety and reliability for Space Shuttle operations. These techniques can process and identify intelligent information hidden in a measured signal which is often unidentifiable using conventional signal analysis methods. Currently, due to the highly interactive processing requirements and the volume of dynamic data involved, detailed diagnostic analysis is being performed manually which requires immense man-hours with extensive human interface. To overcome this manual process, NASA implemented this program to develop an Advanced nonlinear signal Analysis Topographical Mapping System (ATMS) to provide automatic/unsupervised engine diagnostic capabilities. The ATMS will utilize a rule-based Clips expert system to supervise a hierarchy of diagnostic signature analysis techniques in the Advanced Signal Analysis Library (ASAL). ASAL will perform automatic signal processing, archiving, and anomaly detection/identification tasks in order to provide an intelligent and fully automated engine diagnostic capability. The ATMS has been successfully developed under this contract. In summary, the program objectives to design, develop, test and conduct performance evaluation for an automated engine diagnostic system have been successfully achieved. Software implementation of the entire ATMS system on MSFC's OISPS computer has been completed. The significance of the ATMS developed under this program is attributed to the fully automated coherence analysis capability for anomaly detection and identification which can greatly enhance the power and reliability of engine diagnostic evaluation. The results have demonstrated that ATMS can significantly save time and man-hours in performing engine test/flight data analysis and performance evaluation of large volumes of dynamic test data.

'If you are good, I get better': the role of social hierarchy in perceptual decision-making.

PubMed

Santamaría-García, Hernando; Pannunzi, Mario; Ayneto, Alba; Deco, Gustavo; Sebastián-Gallés, Nuria

2014-10-01

So far, it was unclear if social hierarchy could influence sensory or perceptual cognitive processes. We evaluated the effects of social hierarchy on these processes using a basic visual perceptual decision task. We constructed a social hierarchy where participants performed the perceptual task separately with two covertly simulated players (superior, inferior). Participants were faster (better) when performing the discrimination task with the superior player. We studied the time course when social hierarchy was processed using event-related potentials and observed hierarchical effects even in early stages of sensory-perceptual processing, suggesting early top-down modulation by social hierarchy. Moreover, in a parallel analysis, we fitted a drift-diffusion model (DDM) to the results to evaluate the decision making process of this perceptual task in the context of a social hierarchy. Consistently, the DDM pointed to nondecision time (probably perceptual encoding) as the principal period influenced by social hierarchy. © The Author (2013). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Monte Carlo dose calculation using a cell processor based PlayStation 3 system

NASA Astrophysics Data System (ADS)

Chow, James C. L.; Lam, Phil; Jaffray, David A.

2012-02-01

This study investigates the performance of the EGSnrc computer code coupled with a Cell-based hardware in Monte Carlo simulation of radiation dose in radiotherapy. Performance evaluations of two processor-intensive functions namely, HOWNEAR and RANMAR_GET in the EGSnrc code were carried out basing on the 20-80 rule (Pareto principle). The execution speeds of the two functions were measured by the profiler gprof specifying the number of executions and total time spent on the functions. A testing architecture designed for Cell processor was implemented in the evaluation using a PlayStation3 (PS3) system. The evaluation results show that the algorithms examined are readily parallelizable on the Cell platform, provided that an architectural change of the EGSnrc was made. However, as the EGSnrc performance was limited by the PowerPC Processing Element in the PS3, PC coupled with graphics processing units or GPCPU may provide a more viable avenue for acceleration.

Performance evaluation of structure based and ligand based virtual screening methods on ten selected anti-cancer targets.

PubMed

Ramasamy, Thilagavathi; Selvam, Chelliah

2015-10-15

Virtual screening has become an important tool in drug discovery process. Structure based and ligand based approaches are generally used in virtual screening process. To date, several benchmark sets for evaluating the performance of the virtual screening tool are available. In this study, our aim is to compare the performance of both structure based and ligand based virtual screening methods. Ten anti-cancer targets and their corresponding benchmark sets from 'Demanding Evaluation Kits for Objective In silico Screening' (DEKOIS) library were selected. X-ray crystal structures of protein-ligand complexes were selected based on their resolution. Openeye tools such as FRED, vROCS were used and the results were carefully analyzed. At EF1%, vROCS produced better results but at EF5% and EF10%, both FRED and ROCS produced almost similar results. It was noticed that the enrichment factor values were decreased while going from EF1% to EF5% and EF10% in many cases. Published by Elsevier Ltd.

CRT image recording evaluation

NASA Technical Reports Server (NTRS)

1971-01-01

Performance capabilities and limitations of a fiber optic coupled line scan CRT image recording system were investigated. The test program evaluated the following components: (1). P31 phosphor CRT with EMA faceplate; (2). P31 phosphor CRT with clear clad faceplate; (3). Type 7743 semi-gloss dry process positive print paper; (4). Type 777 flat finish dry process positive print paper; (5). Type 7842 dry process positive film; and (6). Type 1971 semi-gloss wet process positive print paper. Detailed test procedures used in each test are provided along with a description of each test, the test data, and an analysis of the results.

Simulation Performance and National Council Licensure Examination for Registered Nurses Outcomes: Field Research Perspectives.

PubMed

Brackney, Dana E; Lane, Susan Hayes; Dawson, Tyia; Koontz, Angie

2017-11-01

This descriptive field study examines processes used to evaluate simulation for senior-level Bachelor of Science in Nursing (BSN) students in a capstone course, discusses challenges related to simulation evaluation, and reports the relationship between faculty evaluation of student performance and National Council Licensure Examination for Registered Nurses (NCLEX-RN) first-time passing rates. Researchers applied seven terms used to rank BSN student performance (n = 41, female, ages 22-24 years) in a senior-level capstone simulation. Faculty evaluation was correlated with students' NCLEX-RN outcomes. Students evaluated as "lacking confidence" and "flawed" were less likely to pass the NCLEX-RN on the first attempt. Faculty evaluation of capstone simulation performance provided additional evidence of student preparedness for practice in the RN role, as evidenced by the relationship between the faculty assessment and NCLEX-RN success. Simulation has been broadly accepted as a powerful educational tool that may also contribute to verification of student achievement of program outcomes and readiness for the RN role.

HANDBOOK ON ADVANCED NONPHOTOCHEMICAL OXIDATION PROCESSES

EPA Science Inventory

The purpose of this handbook is to summarize commercial-scale system performance and cost data for advanced nonphotochemical oxidation (ANPO) treatment of contaminated water, air, and soil. Similar information from pilot-and bench-scale evaluations of ANPO processes is also inclu...

Evaluating coastal and river valley communities evacuation network performance using macroscopic productivity.

DOT National Transportation Integrated Search

2017-06-30

The ever-increasing processing speed and computational power of computers and simulation systems has led to correspondingly larger, more sophisticated representations of evacuation traffic processes. Today, micro-level analyses can be conducted for m...

Cedar Project---Original goals and progress to date

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cybenko, G.; Kuck, D.; Padua, D.

1990-11-28

This work encompasses a broad attack on high speed parallel processing. Hardware, software, applications development, and performance evaluation and visualization as well as research topics are proposed. Our goal is to develop practical parallel processing for the 1990's.

Preliminary Evaluation of an Aviation Safety Thesaurus' Utility for Enhancing Automated Processing of Incident Reports

NASA Technical Reports Server (NTRS)

Barrientos, Francesca; Castle, Joseph; McIntosh, Dawn; Srivastava, Ashok

2007-01-01

This document presents a preliminary evaluation the utility of the FAA Safety Analytics Thesaurus (SAT) utility in enhancing automated document processing applications under development at NASA Ames Research Center (ARC). Current development efforts at ARC are described, including overviews of the statistical machine learning techniques that have been investigated. An analysis of opportunities for applying thesaurus knowledge to improving algorithm performance is then presented.

Electron Beam-Cure Polymer Matrix Composites: Processing and Properties

NASA Technical Reports Server (NTRS)

Wrenn, G.; Frame, B.; Jensen, B.; Nettles, A.

2001-01-01

Researchers from NASA and Oak Ridge National Laboratory are evaluating a series of electron beam curable composites for application in reusable launch vehicle airframe and propulsion systems. Objectives are to develop electron beam curable composites that are useful at cryogenic to elevated temperatures (-217 C to 200 C), validate key mechanical properties of these composites, and demonstrate cost-saving fabrication methods at the subcomponent level. Electron beam curing of polymer matrix composites is an enabling capability for production of aerospace structures in a non-autoclave process. Payoffs of this technology will be fabrication of composite structures at room temperature, reduced tooling cost and cure time, and improvements in component durability. This presentation covers the results of material property evaluations for electron beam-cured composites made with either unidirectional tape or woven fabric architectures. Resin systems have been evaluated for performance in ambient, cryogenic, and elevated temperature conditions. Results for electron beam composites and similar composites cured in conventional processes are reviewed for comparison. Fabrication demonstrations were also performed for electron beam-cured composite airframe and propulsion piping subcomponents. These parts have been built to validate manufacturing methods with electron beam composite materials, to evaluate electron beam curing processing parameters, and to demonstrate lightweight, low-cost tooling options.

Study on photochemical analysis system (VLES) for EUV lithography

NASA Astrophysics Data System (ADS)

Sekiguchi, A.; Kono, Y.; Kadoi, M.; Minami, Y.; Kozawa, T.; Tagawa, S.; Gustafson, D.; Blackborow, P.

2007-03-01

A system for photo-chemical analysis of EUV lithography processes has been developed. This system has consists of 3 units: (1) an exposure that uses the Z-Pinch (Energetiq Tech.) EUV Light source (DPP) to carry out a flood exposure, (2) a measurement system RDA (Litho Tech Japan) for the development rate of photo-resists, and (3) a simulation unit that utilizes PROLITH (KLA-Tencor) to calculate the resist profiles and process latitude using the measured development rate data. With this system, preliminary evaluation of the performance of EUV lithography can be performed without any lithography tool (Stepper and Scanner system) that is capable of imaging and alignment. Profiles for 32 nm line and space pattern are simulated for the EUV resist (Posi-2 resist by TOK) by using VLES that hat has sensitivity at the 13.5nm wavelength. The simulation successfully predicts the resist behavior. Thus it is confirmed that the system enables efficient evaluation of the performance of EUV lithography processes.

Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

PubMed

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2015-02-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Meta-analysis of the technical performance of an imaging procedure: Guidelines and statistical methodology

PubMed Central

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2017-01-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test–retest repeatability data for illustrative purposes. PMID:24872353

Performance evaluation of automated segmentation software on optical coherence tomography volume data

PubMed Central

Tian, Jing; Varga, Boglarka; Tatrai, Erika; Fanni, Palya; Somfai, Gabor Mark; Smiddy, William E.

2016-01-01

Over the past two decades a significant number of OCT segmentation approaches have been proposed in the literature. Each methodology has been conceived for and/or evaluated using specific datasets that do not reflect the complexities of the majority of widely available retinal features observed in clinical settings. In addition, there does not exist an appropriate OCT dataset with ground truth that reflects the realities of everyday retinal features observed in clinical settings. While the need for unbiased performance evaluation of automated segmentation algorithms is obvious, the validation process of segmentation algorithms have been usually performed by comparing with manual labelings from each study and there has been a lack of common ground truth. Therefore, a performance comparison of different algorithms using the same ground truth has never been performed. This paper reviews research-oriented tools for automated segmentation of the retinal tissue on OCT images. It also evaluates and compares the performance of these software tools with a common ground truth. PMID:27159849

Evaluation of performance of asphalt pavements constructed using intelligent compaction techniques.

DOT National Transportation Integrated Search

2014-10-01

The long-term performance of asphalt pavements depends on the quality of the subgrade and : asphalt layers. Intelligent compaction methods continuously monitor the modulus/stiffness of : subgrade and asphalt layers during compaction process and have ...

NTP comparison process

NASA Technical Reports Server (NTRS)

Corban, Robert

1993-01-01

The systems engineering process for the concept definition phase of the program involves requirements definition, system definition, and consistent concept definition. The requirements definition process involves obtaining a complete understanding of the system requirements based on customer needs, mission scenarios, and nuclear thermal propulsion (NTP) operating characteristics. A system functional analysis is performed to provide a comprehensive traceability and verification of top-level requirements down to detailed system specifications and provides significant insight into the measures of system effectiveness to be utilized in system evaluation. The second key element in the process is the definition of system concepts to meet the requirements. This part of the process involves engine system and reactor contractor teams to develop alternative NTP system concepts that can be evaluated against specific attributes, as well as a reference configuration against which to compare system benefits and merits. Quality function deployment (QFD), as an excellent tool within Total Quality Management (TQM) techniques, can provide the required structure and provide a link to the voice of the customer in establishing critical system qualities and their relationships. The third element of the process is the consistent performance comparison. The comparison process involves validating developed concept data and quantifying system merits through analysis, computer modeling, simulation, and rapid prototyping of the proposed high risk NTP subsystems. The maximum amount possible of quantitative data will be developed and/or validated to be utilized in the QFD evaluation matrix. If upon evaluation of a new concept or its associated subsystems determine to have substantial merit, those features will be incorporated into the reference configuration for subsequent system definition and comparison efforts.

The tendency of unconscious thought toward global processing style.

PubMed

Li, Jiansheng; Wang, Fan; Shen, Mowei; Fan, Gang

2017-08-01

This study explored whether unconscious thought has a tendency to process information globally. In three experiments, a Navon task was used to activate global or local processing styles. Findings showed that in the unconscious-thought groups, those performing the local Navon task presented a poorer decision-making performance when compared to those performing the global Navon task (Experiment 1); participants reported that their judgments were made based on partial attributes (Experiment 2), and evaluated a target individual mainly based on information consistent with stereotypes (Experiment 3). These results showed that when presented with distracter tasks, conscious thought activates local processing, which impairs its ability to process information globally. However, this impairment would not happen if global processing were activated instead. This study provides support to the idea that unconscious thought has a tendency to process information globally. Copyright © 2017 Elsevier Inc. All rights reserved.

Parameter optimization of electrochemical machining process using black hole algorithm

NASA Astrophysics Data System (ADS)

Singh, Dinesh; Shukla, Rajkamal

2017-12-01

Advanced machining processes are significant as higher accuracy in machined component is required in the manufacturing industries. Parameter optimization of machining processes gives optimum control to achieve the desired goals. In this paper, electrochemical machining (ECM) process is considered to evaluate the performance of the considered process using black hole algorithm (BHA). BHA considers the fundamental idea of a black hole theory and it has less operating parameters to tune. The two performance parameters, material removal rate (MRR) and overcut (OC) are considered separately to get optimum machining parameter settings using BHA. The variations of process parameters with respect to the performance parameters are reported for better and effective understanding of the considered process using single objective at a time. The results obtained using BHA are found better while compared with results of other metaheuristic algorithms, such as, genetic algorithm (GA), artificial bee colony (ABC) and bio-geography based optimization (BBO) attempted by previous researchers.

Ongoing quality control in digital radiography: Report of AAPM Imaging Physics Committee Task Group 151.

PubMed

Jones, A Kyle; Heintz, Philip; Geiser, William; Goldman, Lee; Jerjian, Khachig; Martin, Melissa; Peck, Donald; Pfeiffer, Douglas; Ranger, Nicole; Yorkston, John

2015-11-01

Quality control (QC) in medical imaging is an ongoing process and not just a series of infrequent evaluations of medical imaging equipment. The QC process involves designing and implementing a QC program, collecting and analyzing data, investigating results that are outside the acceptance levels for the QC program, and taking corrective action to bring these results back to an acceptable level. The QC process involves key personnel in the imaging department, including the radiologist, radiologic technologist, and the qualified medical physicist (QMP). The QMP performs detailed equipment evaluations and helps with oversight of the QC program, the radiologic technologist is responsible for the day-to-day operation of the QC program. The continued need for ongoing QC in digital radiography has been highlighted in the scientific literature. The charge of this task group was to recommend consistency tests designed to be performed by a medical physicist or a radiologic technologist under the direction of a medical physicist to identify problems with an imaging system that need further evaluation by a medical physicist, including a fault tree to define actions that need to be taken when certain fault conditions are identified. The focus of this final report is the ongoing QC process, including rejected image analysis, exposure analysis, and artifact identification. These QC tasks are vital for the optimal operation of a department performing digital radiography.

Ongoing quality control in digital radiography: Report of AAPM Imaging Physics Committee Task Group 151

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, A. Kyle, E-mail: kyle.jones@mdanderson.org; Geiser, William; Heintz, Philip

Quality control (QC) in medical imaging is an ongoing process and not just a series of infrequent evaluations of medical imaging equipment. The QC process involves designing and implementing a QC program, collecting and analyzing data, investigating results that are outside the acceptance levels for the QC program, and taking corrective action to bring these results back to an acceptable level. The QC process involves key personnel in the imaging department, including the radiologist, radiologic technologist, and the qualified medical physicist (QMP). The QMP performs detailed equipment evaluations and helps with oversight of the QC program, the radiologic technologist ismore » responsible for the day-to-day operation of the QC program. The continued need for ongoing QC in digital radiography has been highlighted in the scientific literature. The charge of this task group was to recommend consistency tests designed to be performed by a medical physicist or a radiologic technologist under the direction of a medical physicist to identify problems with an imaging system that need further evaluation by a medical physicist, including a fault tree to define actions that need to be taken when certain fault conditions are identified. The focus of this final report is the ongoing QC process, including rejected image analysis, exposure analysis, and artifact identification. These QC tasks are vital for the optimal operation of a department performing digital radiography.« less

System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

2012-11-01

Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysismore » was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.« less

NASA and Deere to study effects of low-g on iron processing

NASA Technical Reports Server (NTRS)

1981-01-01

A technical exchange agreement to study the effects of processing iron alloys in microgravity is described. Alloy solidification experiments are to be performed in the low-g facilities at Marshall Space Center. Deere is to prepare and evaluate the samples, and perform thermal characterization studies of the furnace used for melting and solidifying the samples. Experiment planning and analysis are to be performed jointly and data shared between the two parties. The technical exchange concept, developed by NASA to involve the private sector in low gravity research programs, is described. Other low gravity processing fields in which industry is invited to participate are listed.

General Tool for Evaluating High-Contrast Coronagraphic Telescope Performance Error Budgets

NASA Technical Reports Server (NTRS)

Marchen, Luis F.

2011-01-01

The Coronagraph Performance Error Budget (CPEB) tool automates many of the key steps required to evaluate the scattered starlight contrast in the dark hole of a space-based coronagraph. The tool uses a Code V prescription of the optical train, and uses MATLAB programs to call ray-trace code that generates linear beam-walk and aberration sensitivity matrices for motions of the optical elements and line-of-sight pointing, with and without controlled fine-steering mirrors (FSMs). The sensitivity matrices are imported by macros into Excel 2007, where the error budget is evaluated. The user specifies the particular optics of interest, and chooses the quality of each optic from a predefined set of PSDs. The spreadsheet creates a nominal set of thermal and jitter motions, and combines that with the sensitivity matrices to generate an error budget for the system. CPEB also contains a combination of form and ActiveX controls with Visual Basic for Applications code to allow for user interaction in which the user can perform trade studies such as changing engineering requirements, and identifying and isolating stringent requirements. It contains summary tables and graphics that can be instantly used for reporting results in view graphs. The entire process to obtain a coronagraphic telescope performance error budget has been automated into three stages: conversion of optical prescription from Zemax or Code V to MACOS (in-house optical modeling and analysis tool), a linear models process, and an error budget tool process. The first process was improved by developing a MATLAB package based on the Class Constructor Method with a number of user-defined functions that allow the user to modify the MACOS optical prescription. The second process was modified by creating a MATLAB package that contains user-defined functions that automate the process. The user interfaces with the process by utilizing an initialization file where the user defines the parameters of the linear model computations. Other than this, the process is fully automated. The third process was developed based on the Terrestrial Planet Finder coronagraph Error Budget Tool, but was fully automated by using VBA code, form, and ActiveX controls.

A Desire for Growth: Online Full-Time Faculty's Perceptions of Evaluation Processes

ERIC Educational Resources Information Center

DeCosta, Meredith; Bergquist, Emily; Holbeck, Rick; Greenberger, Scott

2016-01-01

College and universities evaluate the teaching performance of faculty members in a variety of ways. Benefits to effective faculty evaluation include advancing the scholarship of teaching and learning, as well as improving the functionality and innovation of courses, curriculum, departments, and ultimately the broader community (Boyer, 1990;…

Identifying and Evaluating External Validity Evidence for Passing Scores

ERIC Educational Resources Information Center

Davis-Becker, Susan L.; Buckendahl, Chad W.

2013-01-01

A critical component of the standard setting process is collecting evidence to evaluate the recommended cut scores and their use for making decisions and classifying students based on test performance. Kane (1994, 2001) proposed a framework by which practitioners can identify and evaluate evidence of the results of the standard setting from (1)…

Analysis of Questionnaires Applied in the Evaluation Process of Academicians in Higher Education Institutes

ERIC Educational Resources Information Center

Kalayci, Nurdan; Cimen, Orhan

2012-01-01

The aim of this study is to examine the questionnaires used to evaluate teaching performance in higher education institutes and called "Instructor and Course Evaluation Questionnaires (ICEQ)" in terms of questionnaire preparation techniques and components of curriculum. Obtaining at least one ICEQ belonging to any state and private…

42 CFR 483.134 - Evaluating whether an individual with mental illness requires specialized services (PASARR/MI).

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Evaluating whether an individual with mental... the minimum data needs and process requirements for the State mental health authority, which is... designate the mental health professionals who are qualified— (i) To perform the evaluations required under...

42 CFR 483.134 - Evaluating whether an individual with mental illness requires specialized services (PASARR/MI).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Evaluating whether an individual with mental... the minimum data needs and process requirements for the State mental health authority, which is... designate the mental health professionals who are qualified— (i) To perform the evaluations required under...

A survey of the economics of materials processing in space. [accenting biomedical materials

NASA Technical Reports Server (NTRS)

Miller, B. P.

1975-01-01

A survey of the economics of space materials processing has been performed with the objectives of identifying those areas of space materials processing that give preliminary indication of significant economic potential, and to identify possible approaches to quantify the economic potential. It is concluded that limited economic studies have been performed to date, primarily in the area of the processing of inorganic materials, but that the economics of space processing of biological material has not received adequate attention. Specific studies are recommended to evaluate the economic impact of human lymphocyte subgroup separation on organ transplantation, and on the separation and concentration of urokinase producing cells.

Identification, regression and validation of an image processing degradation model to assess the effects of aeromechanical turbulence due to installation aircraft

NASA Astrophysics Data System (ADS)

Miccoli, M.; Usai, A.; Tafuto, A.; Albertoni, A.; Togna, F.

2016-10-01

The propagation environment around airborne platforms may significantly degrade the performance of Electro-Optical (EO) self-protection systems installed onboard. To ensure the sufficient level of protection, it is necessary to understand that are the best sensors/effectors installation positions to guarantee that the aeromechanical turbulence, generated by the engine exhausts and the rotor downwash, does not interfere with the imaging systems normal operations. Since the radiation-propagation-in-turbulence is a hardly predictable process, it was proposed a high-level approach in which, instead of studying the medium under turbulence, the turbulence effects on the imaging systems processing are assessed by means of an equivalent statistical model representation, allowing a definition of a Turbulence index to classify different level of turbulence intensities. Hence, a general measurement methodology for the degradation of the imaging systems performance in turbulence conditions was developed. The analysis of the performance degradation started by evaluating the effects of turbulences with a given index on the image processing chain (i.e., thresholding, blob analysis). The processing in turbulence (PIT) index is then derived by combining the effects of the given turbulence on the different image processing primitive functions. By evaluating the corresponding PIT index for a sufficient number of testing directions, it is possible to map the performance degradation around the aircraft installation for a generic imaging system, and to identify the best installation position for sensors/effectors composing the EO self-protection suite.

A survey of methods for the evaluation of tissue engineering scaffold permeability.

PubMed

Pennella, F; Cerino, G; Massai, D; Gallo, D; Falvo D'Urso Labate, G; Schiavi, A; Deriu, M A; Audenino, A; Morbiducci, Umberto

2013-10-01

The performance of porous scaffolds for tissue engineering (TE) applications is evaluated, in general, in terms of porosity, pore size and distribution, and pore tortuosity. These descriptors are often confounding when they are applied to characterize transport phenomena within porous scaffolds. On the contrary, permeability is a more effective parameter in (1) estimating mass and species transport through the scaffold and (2) describing its topological features, thus allowing a better evaluation of the overall scaffold performance. However, the evaluation of TE scaffold permeability suffers of a lack of uniformity and standards in measurement and testing procedures which makes the comparison of results obtained in different laboratories unfeasible. In this review paper we summarize the most important features influencing TE scaffold permeability, linking them to the theoretical background. An overview of methods applied for TE scaffold permeability evaluation is given, presenting experimental test benches and computational methods applied (1) to integrate experimental measurements and (2) to support the TE scaffold design process. Both experimental and computational limitations in the permeability evaluation process are also discussed.

Anaerobic treatment of complex chemical wastewater in a sequencing batch biofilm reactor: process optimization and evaluation of factor interactions using the Taguchi dynamic DOE methodology.

PubMed

Venkata Mohan, S; Chandrasekhara Rao, N; Krishna Prasad, K; Murali Krishna, P; Sreenivas Rao, R; Sarma, P N

2005-06-20

The Taguchi robust experimental design (DOE) methodology has been applied on a dynamic anaerobic process treating complex wastewater by an anaerobic sequencing batch biofilm reactor (AnSBBR). For optimizing the process as well as to evaluate the influence of different factors on the process, the uncontrollable (noise) factors have been considered. The Taguchi methodology adopting dynamic approach is the first of its kind for studying anaerobic process evaluation and process optimization. The designed experimental methodology consisted of four phases--planning, conducting, analysis, and validation connected sequence-wise to achieve the overall optimization. In the experimental design, five controllable factors, i.e., organic loading rate (OLR), inlet pH, biodegradability (BOD/COD ratio), temperature, and sulfate concentration, along with the two uncontrollable (noise) factors, volatile fatty acids (VFA) and alkalinity at two levels were considered for optimization of the anae robic system. Thirty-two anaerobic experiments were conducted with a different combination of factors and the results obtained in terms of substrate degradation rates were processed in Qualitek-4 software to study the main effect of individual factors, interaction between the individual factors, and signal-to-noise (S/N) ratio analysis. Attempts were also made to achieve optimum conditions. Studies on the influence of individual factors on process performance revealed the intensive effect of OLR. In multiple factor interaction studies, biodegradability with other factors, such as temperature, pH, and sulfate have shown maximum influence over the process performance. The optimum conditions for the efficient performance of the anaerobic system in treating complex wastewater by considering dynamic (noise) factors obtained are higher organic loading rate of 3.5 Kg COD/m3 day, neutral pH with high biodegradability (BOD/COD ratio of 0.5), along with mesophilic temperature range (40 degrees C), and low sulfate concentration (700 mg/L). The optimization resulted in enhanced anaerobic performance (56.7%) from a substrate degradation rate (SDR) of 1.99 to 3.13 Kg COD/m3 day. Considering the obtained optimum factors, further validation experiments were carried out, which showed enhanced process performance (3.04 Kg COD/m3-day from 1.99 Kg COD/m3 day) accounting for 52.13% improvement with the optimized process conditions. The proposed method facilitated a systematic mathematical approach to understand the complex multi-species manifested anaerobic process treating complex chemical wastewater by considering the uncontrollable factors. Copyright (c) 2005 Wiley Periodicals, Inc.

[Surveillance cultures after high-level disinfection of flexible endoscopes in a general hospital].

PubMed

Robles, Christian; Turín, Christie; Villar, Alicia; Huerta-Mercado, Jorge; Samalvides, Frine

2014-04-01

Flexible endoscopes are instruments with a complex structure which are used in invasive gastroenterological procedures, therefore high-level disinfection (HLD) is recommended as an appropriate reprocessing method. However, most hospitals do not perform a quality control to assess the compliance and results of the disinfection process. To evaluate the effectiveness of the flexible endoscopes’ decontamination after high-level disinfection by surveillance cultures and to assess the compliance with the reprocessing guidelines. Descriptive study conducted in January 2013 in the Gastroenterological Unit of a tertiary hospital. 30 endoscopic procedures were randomly selected. Compliance with guidelines was evaluated and surveillance cultures for common bacteria were performed after the disinfection process. On the observational assessment, compliance with the guidelines was as follows: pre-cleaning 9 (30%), cleaning 5 (16.7%), rinse 3 (10%), first drying 30 (100%), disinfection 30 (100%), final rinse 0 (0%) and final drying 30 (100%), demonstrating that only 3 of 7 stages of the disinfection process were optimally performed. In the microbiological evaluation, 2 (6.7%) of the 30 procedures had a positive culture obtained from the surface of the endoscope. Furthermore, 1 (4.2%) of the 24 biopsy forcepsgave a positive culture. The organisms isolated were different Pseudomonas species. High-level disinfection procedures were not optimally performed, finding in 6.7% positive cultures of Pseudomonas species.

Collision avoidance system cost-benefit analysis : volume I - technical manual

DOT National Transportation Integrated Search

1981-09-01

Collision-avoidance systems under development in the U.S.A., Japan and Germany were evaluated. The performance evaluation showed that the signal processing and the control law of a system were the key parameters that decided the system's capability, ...

Psychophysical evaluation of the image quality of a dynamic flat-panel digital x-ray image detector using the threshold contrast detail detectability (TCDD) technique

NASA Astrophysics Data System (ADS)

Davies, Andrew G.; Cowen, Arnold R.; Bruijns, Tom J. C.

1999-05-01

We are currently in an era of active development of the digital X-ray imaging detectors that will serve the radiological communities in the new millennium. The rigorous comparative physical evaluations of such devices are therefore becoming increasingly important from both the technical and clinical perspectives. The authors have been actively involved in the evaluation of a clinical demonstration version of a flat-panel dynamic digital X-ray image detector (or FDXD). Results of objective physical evaluation of this device have been presented elsewhere at this conference. The imaging performance of FDXD under radiographic exposure conditions have been previously reported, and in this paper a psychophysical evaluation of the FDXD detector operating under continuous fluoroscopic conditions is presented. The evaluation technique employed was the threshold contrast detail detectability (TCDD) technique, which enables image quality to be measured on devices operating in the clinical environment. This approach addresses image quality in the context of both the image acquisition and display processes, and uses human observers to measure performance. The Leeds test objects TO[10] and TO[10+] were used to obtain comparative measurements of performance on the FDXD and two digital spot fluorography (DSF) systems, one utilizing a Plumbicon camera and the other a state of the art CCD camera. Measurements were taken at a range of detector entrance exposure rates, namely 6, 12, 25 and 50 (mu) R/s. In order to facilitate comparisons between the systems, all fluoroscopic image processing such as noise reduction algorithms, were disabled during the experiments. At the highest dose rate FDXD significantly outperformed the DSF comparison systems in the TCDD comparisons. At 25 and 12 (mu) R/s all three-systems performed in an equivalent manner and at the lowest exposure rate FDXD was inferior to the two DSF systems. At standard fluoroscopic exposures, FDXD performed in an equivalent manner to the DSF systems for the TCDD comparisons. This would suggest that FDXD would therefore perform adequately in a clinical fluoroscopic environment and our initial clinical experiences support this. Noise reduction processing of the fluoroscopic data acquired on FDXD was also found to further improve TCDD performance for FDXD. FDXD therefore combines acceptable fluoroscopic performance with excellent radiographic (snap shot) imaging fidelity, allowing the possibility of a universal x-ray detector to be developed, based on FDXD's technology. It is also envisaged that fluoroscopic performance will be improved by the development of digital image enhancement techniques specifically tailored to the characteristics of the FDXD detector.

[RehaFuturReal®: Evaluation of Implementation in Organizational Structure and in Counseling Process - An Overview of Results].

PubMed

Arling, V; Knispel, J; Spijkers, W

2016-08-01

Due to prevailing future challenges in vocational rehabilitation, development process RehaFutur (BMAS) was initiated. In this context, recommendations were made to secure a future-oriented, innovative vocational rehabilitation in Germany. Deutsche Rentenversicherung (DRV) Westfalen transferred these recommendations into a new and applicable counseling concept RehaFutuReal(®). Rehabilitation managers (RM) are central protagonists in counseling process. Therefore, RehaFuturReal(®) focused on optimization of counseling performance. To achieve this aim, rehabilitation managers were taught to work with a case management (CM) based approach. RWTH Aachen supported RehaFuturReal(®) from an academic point of view and conducted a formative and summative evaluation. Primary aim of RWTH Aachen was to support DRV Westfalen during implementation of RehaFuturReal(®) into their organizational structure. Additionally, RWTH Aachen controlled whether transfer of RehaFutuReal(®) in counseling process was successful. From 04-01-13 until 12-31-14, RehaFuturReal(®) was tested by DRV Westfalen in the intervention district Dortmund with 10 RM. There were 3 selection criteria for the overall sample of N=320 insurants: participants were required to have an active employment status, suffered from integration issues and were in need of support to achieve vocational integration. Evaluation of RehaFuturReal(®) was realized summative (pre-post-comparison) and formative (process-orientated). Evaluative judgment regarding implementation in organizational structure and counseling process was performed by using three-stage-concept of Donabedian (quality of structure, process and results). Thereby, feedback of RM, insurants and employers was taken into account. Analysis of evaluation results revealed a positive overall impression. Implementation into organizational structure was successful on all 3 quality stages: concept of project and CM-training were an adequate basis and appropriately put into practice by fulfilling prescribed objectives, topics and schedule (quality of structure). Rehabilitation managers identified themselves with the implementation process into DRV Westfalen (grading of CM training: M=1,67; SD=0,65; quality of process). Analogous, consultants reported a high level of satisfaction during implementation of new counseling process (possible span: 1-4; M=3,11; SD=0,33; quality of results). Regarding implementation of counseling process, sample fitted into 3 selection criteria wherefore the correct insurants were picked in RehaFuturReal(®) (quality of structure). CM-orientated counseling approach was properly implemented into everyday work of RM by using CM-instruments for documentation (quality of process). RM were highly satisfied (possible span: 1-4) with counseling performance (M=3,43; SD=0,77). Employers also rated counseling performance positively (M=3,38; SD=0,85). By contrast, surveying insurants revealed a heterogeneous impression of satisfaction (M=2,97; SD=1,03) (quality of results). © Georg Thieme Verlag KG Stuttgart · New York.

Inter-Annotator Agreement and the Upper Limit on Machine Performance: Evidence from Biomedical Natural Language Processing.

PubMed

Boguslav, Mayla; Cohen, Kevin Bretonnel

2017-01-01

Human-annotated data is a fundamental part of natural language processing system development and evaluation. The quality of that data is typically assessed by calculating the agreement between the annotators. It is widely assumed that this agreement between annotators is the upper limit on system performance in natural language processing: if humans can't agree with each other about the classification more than some percentage of the time, we don't expect a computer to do any better. We trace the logical positivist roots of the motivation for measuring inter-annotator agreement, demonstrate the prevalence of the widely-held assumption about the relationship between inter-annotator agreement and system performance, and present data that suggest that inter-annotator agreement is not, in fact, an upper bound on language processing system performance.

Performance Evaluation in Network-Based Parallel Computing

NASA Technical Reports Server (NTRS)

Dezhgosha, Kamyar

1996-01-01

Network-based parallel computing is emerging as a cost-effective alternative for solving many problems which require use of supercomputers or massively parallel computers. The primary objective of this project has been to conduct experimental research on performance evaluation for clustered parallel computing. First, a testbed was established by augmenting our existing SUNSPARCs' network with PVM (Parallel Virtual Machine) which is a software system for linking clusters of machines. Second, a set of three basic applications were selected. The applications consist of a parallel search, a parallel sort, a parallel matrix multiplication. These application programs were implemented in C programming language under PVM. Third, we conducted performance evaluation under various configurations and problem sizes. Alternative parallel computing models and workload allocations for application programs were explored. The performance metric was limited to elapsed time or response time which in the context of parallel computing can be expressed in terms of speedup. The results reveal that the overhead of communication latency between processes in many cases is the restricting factor to performance. That is, coarse-grain parallelism which requires less frequent communication between processes will result in higher performance in network-based computing. Finally, we are in the final stages of installing an Asynchronous Transfer Mode (ATM) switch and four ATM interfaces (each 155 Mbps) which will allow us to extend our study to newer applications, performance metrics, and configurations.

Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm clip processed using high-pressure torsion.

PubMed

Um, Ho Yong; Park, Byung Ho; Ahn, Dong-Hyun; Abd El Aal, Mohamed Ibrahim; Park, Jaechan; Kim, Hyoung Seop

2017-04-01

Severe plastic deformation (SPD) has recently been advanced as the main process for fabricating bulk ultrafine grained or nanocrystalline metallic materials, which present much higher strength and better bio-compatibility than coarse-grained counterparts. Medical devices, such as aneurysm clips and dental implants, require high mechanical and biological performance (e.g., stiffness, yield strength, fatigue resistance, and bio-compatibility). These requirements match well the characteristics of SPD-processed materials. Typical aneurysm clips are made of a commercial Ti-6Al-4V alloy, which has higher yield strength than Ti. In this work, Ti and Ti-6Al-4V workpieces were processed by high-pressure torsion (HPT) to enhance their mechanical properties. Tensile tests and hardness tests were performed to evaluate their mechanical properties, and their microstructure was investigated. The hardness and yield stress of the HPT-processed Ti are comparable to those of the initial Ti-6Al-4V due to significantly refined microstructure. Finite element analyses for evaluating the opening performance of a specific geometry of the YASARGIL aneurysm clip were carried out using mechanical properties of the initial and HPT-processed Ti and Ti-6Al-4V. These results indicate that SPD-processed Ti could be a good candidate to substitute for Ti-6Al-4V in aneurysm clips. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing and Improving Performance: A Longitudinal Evaluation of Priority Setting and Resource Allocation in a Canadian Health Region.

PubMed

Hall, William; Smith, Neale; Mitton, Craig; Urquhart, Bonnie; Bryan, Stirling

2017-08-22

In order to meet the challenges presented by increasing demand and scarcity of resources, healthcare organizations are faced with difficult decisions related to resource allocation. Tools to facilitate evaluation and improvement of these processes could enable greater transparency and more optimal distribution of resources. The Resource Allocation Performance Assessment Tool (RAPAT) was implemented in a healthcare organization in British Columbia, Canada. Recommendations for improvement were delivered, and a follow up evaluation exercise was conducted to assess the trajectory of the organization's priority setting and resource allocation (PSRA) process 2 years post the original evaluation. Implementation of RAPAT in the pilot organization identified strengths and weaknesses of the organization's PSRA process at the time of the original evaluation. Strengths included the use of criteria and evidence, an ability to reallocate resources, and the involvement of frontline staff in the process. Weaknesses included training, communication, and lack of program budgeting. Although the follow up revealed a regression from a more formal PSRA process, a legacy of explicit resource allocation was reported to be providing ongoing benefit for the organization. While past studies have taken a cross-sectional approach, this paper introduces the first longitudinal evaluation of PSRA in a healthcare organization. By including the strengths, weaknesses, and evolution of one organization's journey, the authors' intend that this paper will assist other healthcare leaders in meeting the challenges of allocating scarce resources. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

A new approach using coagulation rate constant for evaluation of turbidity removal

NASA Astrophysics Data System (ADS)

Al-Sameraiy, Mukheled

2017-06-01

Coagulation-flocculation-sedimentation processes for treating three levels of bentonite synthetic turbid water using date seeds (DS) and alum (A) coagulants were investigated in the previous research work. In the current research, the same experimental results were used to adopt a new approach on a basis of using coagulation rate constant as an investigating parameter to identify optimum doses of these coagulants. Moreover, the performance of these coagulants to meet (WHO) turbidity standard was assessed by introducing a new evaluating criterion in terms of critical coagulation rate constant (kc). Coagulation rate constants (k2) were mathematically calculated in second order form of coagulation process for each coagulant. The maximum (k2) values corresponded to doses, which were obviously to be considered as optimum doses. The proposed criterion to assess the performance of coagulation process of these coagulants was based on the mathematical representation of (WHO) turbidity guidelines in second order form of coagulation process stated that (k2) for each coagulant should be ≥ (kc) for each level of synthetic turbid water. For all tested turbid water, DS coagulant could not satisfy it. While, A coagulant could satisfy it. The results obtained in the present research are exactly in agreement with the previous published results in terms of finding optimum doses for each coagulant and assessing their performances. On the whole, it is recommended considering coagulation rate constant to be a new approach as an indicator for investigating optimum doses and critical coagulation rate constant to be a new evaluating criterion to assess coagulants' performance.

Optimization of mechanical performance of oxidative nano-particle electrode nitrile butadiene rubber conducting polymer actuator.

PubMed

Kim, Baek-Chul; Park, S J; Cho, M S; Lee, Y; Nam, J D; Choi, H R; Koo, J C

2009-12-01

Present work delivers a systematical evaluation of actuation efficiency of a nano-particle electrode conducting polymer actuator fabricated based on Nitrile Butadiene Rubber (NBR). Attempts are made for maximizing mechanical functionality of the nano-particle electrode conducting polymer actuator that can be driven in the air. As the conducting polymer polypyrrole of the actuator is to be fabricated through a chemical oxidation polymerization process that may impose certain limitations on both electrical and mechanical functionality of the actuator, a coordinated study for optimization process of the actuator is necessary for maximizing its performance. In this article actuation behaviors of the nano-particle electrode polypyrrole conducting polymer is studied and an optimization process for the mechanical performance maximization is performed.

Faculty performance evaluation in accredited U.S. public health graduate schools and programs: a national study.

PubMed

Gimbel, Ronald W; Cruess, David F; Schor, Kenneth; Hooper, Tomoko I; Barbour, Galen L

2008-10-01

To provide baseline data on evaluation of faculty performance in U.S. schools and programs of public health. The authors administered an anonymous Internet-based questionnaire using PHP Surveyor. The invited sample consisted of individuals listed in the Council on Education for Public Health (CEPH) Directory of Accredited Schools and Programs of Public Health. The authors explored performance measures in teaching, research, and service, and assessed how faculty performance measures are used. A total of 64 individuals (60.4%) responded to the survey, with 26 (40.6%) reporting accreditation/reaccreditation by CEPH within the preceding 24 months. Although all schools and programs employ faculty performance evaluations, a significant difference exists between schools and programs in the use of results for merit pay increases and mentoring purposes. Thirty-one (48.4%) of the organizations published minimum performance expectations. Fifty-nine (92.2%) of the respondents counted number of publications, but only 22 (34.4%) formally evaluated their quality. Sixty-two (96.9%) evaluated teaching through student course evaluations, and only 29 (45.3%) engaged in peer assessment. Although aggregate results of teaching evaluation are available to faculty and administrators, this information is often unavailable to students and the public. Most schools and programs documented faculty service activities qualitatively but neither assessed it quantitatively nor evaluated its impact. This study provides insight into how schools and programs of public health evaluate faculty performance. Results suggest that although schools and programs do evaluate faculty performance on a basic level, many do not devote substantial attention to this process.

Sustainability of cement kiln co-processing of wastes in India: a pilot study.

PubMed

Baidya, Rahul; Ghosh, Sadhan Kumar; Parlikar, Ulhas V

2017-07-01

Co-processing in cement kiln achieves effective utilization of the material and energy value present in the wastes, thereby conserving the natural resources by reducing the use of virgin material. In India, a number of multifolded initiatives have been taken that take into account the potential and volume of waste generation. This paper studies the factors which might influence the sustainability of co-processing of waste in cement kilns as a business model, considering the issues and challenges in the supply chain framework in India in view of the four canonical pillars of sustainability. A pilot study on co-processing was carried out in one of the cement plant in India to evaluate the environmental performance, economical performance, operational performance and social performance. The findings will help India and other developing countries to introduce effective supply chain management for co-processing while addressing the issues and challenges during co-processing of different waste streams in the cement kilns.

Evaluation of hyperspectral reflectance for estimating dry matter and sugar concentration in processing potatoes

USDA-ARS?s Scientific Manuscript database

The measurement of sugar concentration and dry matter in processing potatoes is a time and resource intensive activity, cannot be performed in the field, and does not easily measure within tuber variation. A proposed method to improve the phenotyping of processing potatoes is to employ hyperspectral...

Space Station Water Processor Process Pump

NASA Technical Reports Server (NTRS)

Parker, David

1995-01-01

This report presents the results of the development program conducted under contract NAS8-38250-12 related to the International Space Station (ISS) Water Processor (WP) Process Pump. The results of the Process Pumps evaluation conducted on this program indicates that further development is required in order to achieve the performance and life requirements for the ISSWP.

[Image processing system of visual prostheses based on digital signal processor DM642].

PubMed

Xie, Chengcheng; Lu, Yanyu; Gu, Yun; Wang, Jing; Chai, Xinyu

2011-09-01

This paper employed a DSP platform to create the real-time and portable image processing system, and introduced a series of commonly used algorithms for visual prostheses. The results of performance evaluation revealed that this platform could afford image processing algorithms to be executed in real time.

Performance Evaluations of Ion Exchanged Zeolite Membranes on Alumina Supports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhave, Ramesh R.; Jubin, Robert Thomas; Spencer, Barry B.

2017-08-27

This report describes the synthesis and evaluation of molecular sieve zeolite membranes to separate and concentrate tritiated water (HTO) from dilute HTO-bearing aqueous streams. In the first phase of this effort, several monovalent and divalent cation-exchanged silico alumino phosphate (SAPO-34) molecular sieve zeolite membranes were synthesized on disk supports and characterized with gas and vapor permeation measurements. In the second phase, Linde Type A (LTA) zeolite membranes were synthesized in disk and tubular supports. The pervaporation process performance was evaluated for the separation and concentration of tritiated water.

Nickel hydrogen battery expert system

NASA Technical Reports Server (NTRS)

Shiva, Sajjan G.

1991-01-01

The Hubble Telescope Battery Testbed at MSFC uses the Nickel Cadmium (NiCd) Battery Expert System (NICBES-2) which supports the evaluation of performance of Hubble Telescope spacecraft batteries and provides alarm diagnosis and action advice. NICBES-2 provides a reasoning system along with a battery domain knowledge base to achieve this battery health management function. An effort is summarized which was used to modify NICBES-2 to accommodate Nickel Hydrogen (NiH2) battery environment now in MSFC testbed. The NICBES-2 is implemented on a Sun Microsystem and is written in SunOS C and Quintus Prolog. The system now operates in a multitasking environment. NICBES-2 spawns three processes: serial port process (SPP); data handler process (DHP); and the expert system process (ESP) in order to process the telemetry data and provide the status and action advice. NICBES-2 performs orbit data gathering, data evaluation, alarm diagnosis and action advice and status and history display functions. The adaptation of NICBES-2 to work with NiH2 battery environment required modification to all of the three component processes.

Evaluation of natural language processing systems: Issues and approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guida, G.; Mauri, G.

This paper encompasses two main topics: a broad and general analysis of the issue of performance evaluation of NLP systems and a report on a specific approach developed by the authors and experimented on a sample test case. More precisely, it first presents a brief survey of the major works in the area of NLP systems evaluation. Then, after introducing the notion of the life cycle of an NLP system, it focuses on the concept of performance evaluation and analyzes the scope and the major problems of the investigation. The tools generally used within computer science to assess the qualitymore » of a software system are briefly reviewed, and their applicability to the task of evaluation of NLP systems is discussed. Particular attention is devoted to the concepts of efficiency, correctness, reliability, and adequacy, and how all of them basically fail in capturing the peculiar features of performance evaluation of an NLP system is discussed. Two main approaches to performance evaluation are later introduced; namely, black-box- and model-based, and their most important characteristics are presented. Finally, a specific model for performance evaluation proposed by the authors is illustrated, and the results of an experiment with a sample application are reported. The paper concludes with a discussion on research perspective, open problems, and importance of performance evaluation to industrial applications.« less

An open-source framework for large-scale, flexible evaluation of biomedical text mining systems.

PubMed

Baumgartner, William A; Cohen, K Bretonnel; Hunter, Lawrence

2008-01-29

Improved evaluation methodologies have been identified as a necessary prerequisite to the improvement of text mining theory and practice. This paper presents a publicly available framework that facilitates thorough, structured, and large-scale evaluations of text mining technologies. The extensibility of this framework and its ability to uncover system-wide characteristics by analyzing component parts as well as its usefulness for facilitating third-party application integration are demonstrated through examples in the biomedical domain. Our evaluation framework was assembled using the Unstructured Information Management Architecture. It was used to analyze a set of gene mention identification systems involving 225 combinations of system, evaluation corpus, and correctness measure. Interactions between all three were found to affect the relative rankings of the systems. A second experiment evaluated gene normalization system performance using as input 4,097 combinations of gene mention systems and gene mention system-combining strategies. Gene mention system recall is shown to affect gene normalization system performance much more than does gene mention system precision, and high gene normalization performance is shown to be achievable with remarkably low levels of gene mention system precision. The software presented in this paper demonstrates the potential for novel discovery resulting from the structured evaluation of biomedical language processing systems, as well as the usefulness of such an evaluation framework for promoting collaboration between developers of biomedical language processing technologies. The code base is available as part of the BioNLP UIMA Component Repository on SourceForge.net.

An open-source framework for large-scale, flexible evaluation of biomedical text mining systems

PubMed Central

Baumgartner, William A; Cohen, K Bretonnel; Hunter, Lawrence

2008-01-01

Background Improved evaluation methodologies have been identified as a necessary prerequisite to the improvement of text mining theory and practice. This paper presents a publicly available framework that facilitates thorough, structured, and large-scale evaluations of text mining technologies. The extensibility of this framework and its ability to uncover system-wide characteristics by analyzing component parts as well as its usefulness for facilitating third-party application integration are demonstrated through examples in the biomedical domain. Results Our evaluation framework was assembled using the Unstructured Information Management Architecture. It was used to analyze a set of gene mention identification systems involving 225 combinations of system, evaluation corpus, and correctness measure. Interactions between all three were found to affect the relative rankings of the systems. A second experiment evaluated gene normalization system performance using as input 4,097 combinations of gene mention systems and gene mention system-combining strategies. Gene mention system recall is shown to affect gene normalization system performance much more than does gene mention system precision, and high gene normalization performance is shown to be achievable with remarkably low levels of gene mention system precision. Conclusion The software presented in this paper demonstrates the potential for novel discovery resulting from the structured evaluation of biomedical language processing systems, as well as the usefulness of such an evaluation framework for promoting collaboration between developers of biomedical language processing technologies. The code base is available as part of the BioNLP UIMA Component Repository on SourceForge.net. PMID:18230184

Evaluation of a Stirling Solar Dynamic System for Lunar Oxygen Production

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Wong, Wayne A.

2006-01-01

An evaluation of a solar concentrator-based system for producing oxygen from the lunar regolith was performed. The system utilizes a solar concentrator mirror to provide thermal energy for the oxygen production process as well as thermal energy to power a Stirling heat engine for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The oxygen production method utilized in the analysis was the hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process rate effected the oxygen production rate.

Impact of Educational Level on Performance on Auditory Processing Tests.

PubMed

Murphy, Cristina F B; Rabelo, Camila M; Silagi, Marcela L; Mansur, Letícia L; Schochat, Eliane

2016-01-01

Research has demonstrated that a higher level of education is associated with better performance on cognitive tests among middle-aged and elderly people. However, the effects of education on auditory processing skills have not yet been evaluated. Previous demonstrations of sensory-cognitive interactions in the aging process indicate the potential importance of this topic. Therefore, the primary purpose of this study was to investigate the performance of middle-aged and elderly people with different levels of formal education on auditory processing tests. A total of 177 adults with no evidence of cognitive, psychological or neurological conditions took part in the research. The participants completed a series of auditory assessments, including dichotic digit, frequency pattern and speech-in-noise tests. A working memory test was also performed to investigate the extent to which auditory processing and cognitive performance were associated. The results demonstrated positive but weak correlations between years of schooling and performance on all of the tests applied. The factor "years of schooling" was also one of the best predictors of frequency pattern and speech-in-noise test performance. Additionally, performance on the working memory, frequency pattern and dichotic digit tests was also correlated, suggesting that the influence of educational level on auditory processing performance might be associated with the cognitive demand of the auditory processing tests rather than auditory sensory aspects itself. Longitudinal research is required to investigate the causal relationship between educational level and auditory processing skills.

Ecotoxicological evaluation of diesel-contaminated soil before and after a bioremediation process.

PubMed

Molina-Barahona, L; Vega-Loyo, L; Guerrero, M; Ramírez, S; Romero, I; Vega-Jarquín, C; Albores, A

2005-02-01

Evaluation of contaminated sites is usually performed by chemical analysis of pollutants in soil. This is not enough either to evaluate the environmental risk of contaminated soil nor to evaluate the efficiency of soil cleanup techniques. Information on the bioavailability of complex mixtures of xenobiotics and degradation products cannot be totally provided by chemical analytical data, but results from bioassays can integrate the effects of pollutants in complex mixtures. In the preservation of human health and environment quality, it is important to assess the ecotoxicological effects of contaminated soils to obtain a better evaluation of the healthiness of this system. The monitoring of a diesel-contaminated soil and the evaluation of a bioremediation technique conducted on a microcosm scale were performed by a battery of ecotoxicological tests including phytotoxicity, Daphnia magna, and nematode assays. In this study we biostimulated the native microflora of soil contaminated with diesel by adding nutrients and crop residue (corn straw) as a bulking agent and as a source of microorganisms and nutrients; in addition, moisture was adjusted to enhance diesel removal. The bioremediation process efficiency was evaluated directly by an innovative, simple phytotoxicity test system and the diesel extracts by Daphnia magna and nematode assays. Contaminated soil samples were revealed to have toxic effects on seed germination, seedling growth, and Daphnia survival. After biostimulation, the diesel concentration was reduced by 50.6%, and the soil samples showed a significant reduction in phytotoxicity (9%-15%) and Daphnia assays (3-fold), confirming the effectiveness of the bioremediation process. Results from our microcosm study suggest that in addition to the evaluation of the bioremediation processes efficiency, toxicity testing is different with organisms representative of diverse phylogenic levels. The integration of analytical, toxicological and bioremediation data is necessary to properly assess the ecological risk of bioremediation processes. (c) 2005 Wiley Periodicals, Inc.

MSFC Skylab instrumentation and communication system mission evaluation

NASA Technical Reports Server (NTRS)

Adair, B. M.

1974-01-01

An evaluation of the in-orbit performance of the instrumentation and communications systems installed on Skylab is presented. Performance is compared with functional requirements and the fidelity of communications. In-orbit performance includes processing engineering, scientific, experiment, and biomedical data, implementing ground-generated commands, audio and video communication, generating rendezvous ranging information, and radio frequency transmission and reception. A history of the system evolution based on the functional requirements and a physical description of the launch configuration is included. The report affirms that the instrumentation and communication system satisfied all imposed requirements.

Multi-criteria group decision making for evaluating the performance of e-waste recycling programs under uncertainty.

PubMed

Wibowo, Santoso; Deng, Hepu

2015-06-01

This paper presents a multi-criteria group decision making approach for effectively evaluating the performance of e-waste recycling programs under uncertainty in an organization. Intuitionistic fuzzy numbers are used for adequately representing the subjective and imprecise assessments of the decision makers in evaluating the relative importance of evaluation criteria and the performance of individual e-waste recycling programs with respect to individual criteria in a given situation. An interactive fuzzy multi-criteria decision making algorithm is developed for facilitating consensus building in a group decision making environment to ensure that all the interest of individual decision makers have been appropriately considered in evaluating alternative e-waste recycling programs with respect to their corporate sustainability performance. The developed algorithm is then incorporated into a multi-criteria decision support system for making the overall performance evaluation process effectively and simple to use. Such a multi-criteria decision making system adequately provides organizations with a proactive mechanism for incorporating the concept of corporate sustainability into their regular planning decisions and business practices. An example is presented for demonstrating the applicability of the proposed approach in evaluating the performance of e-waste recycling programs in organizations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dynamics of Team Reflexivity after Feedback

ERIC Educational Resources Information Center

Gabelica, Catherine; Van den Bossche, Piet; Segers, Mien; Gijselaers, Wim

2014-01-01

A great deal of work has been generated on feedback in teams and has shown that giving performance feedback to teams is not sufficient to improve performance. To achieve the potential of feedback, it is stated that teams need to proactively process this feedback and thus collectively evaluate their performance and strategies, look for…

Practical and Theoretical Requirements for Controlling Rater Stringency in Peer Review.

ERIC Educational Resources Information Center

Cason, Gerald J.; Cason, Carolyn L.

This study describes a computer based, performance rating information processing system, performance rating theory, and programs for the application of the theory to obtain ratings free from the effects of reviewer stringency in reviewing abstracts of conference papers. Originally, the Performance Rating (PR) System was used to evaluate the…

Team Performance Assessment and Measurement: Theory, Methods, and Applications. Series in Applied Psychology.

ERIC Educational Resources Information Center

Brannick, Michael T., Ed.; Salas, Eduardo, Ed.; Prince, Carolyn, Ed.

This volume presents thoughts on measuring team performance written by experts currently working with teams in fields such as training, evaluation, and process consultation. The chapters are: (1) "An Overview of Team Performance Measurement" (Michael T. Brannick and Carolyn Prince); (2) "A Conceptual Framework for Teamwork Measurement" (Terry L.…

Study of the Performance and Characteristics of U.S. Academic Research Institution Technology Commercialization (ARITC)

ERIC Educational Resources Information Center

Kim, Jisun

2012-01-01

This dissertation aims to provide a better understanding of the technology licensing practices of academic research institutions. The study identifies time durations in licensing and incorporates these into a model to evaluate licensing performance. Performance is measured by the efficiency of an institution's technology licensing process and…

Performance, Process, and Costs: Managing Service Quality with the Balanced Scorecard.

ERIC Educational Resources Information Center

Poll, Roswitha

2001-01-01

Describes a cooperative project among three German libraries that used the Balanced Scorecard as a concept for an integrated quality management system. Considers performance indicators across four perspectives that will help academic libraries establish an integrated controlling system and to collect and evaluate performance as well as cost data…

The Relationship between Emotional Intelligence and Student Teacher Performance

ERIC Educational Resources Information Center

Drew, Todd L.

2006-01-01

The purpose of this mixed methods study (N = 40) was to determine whether Student Teacher Performance (STP), as measured by a behavior-based performance evaluation process, is associated with Emotional Intelligence (EI), as measured by a personality assessment instrument. The study is an important contribution to the literature in that it appears…

Collision avoidance system cost-benefit analysis : volume III - appendices F-M

DOT National Transportation Integrated Search

1981-09-01

Collision-avoidance systems under development in the U.S.A., Japan and Germany were evaluated. The performance evaluation showed that the signal processing and the control law of a system were the key parameters that decided the system's capability, ...

Collision avoidance system cost-benefit analysis : volume II - appendices A-E

DOT National Transportation Integrated Search

1981-09-01

Collision-avoidance systems under development in the U.S.A., Japan and Germany were evaluated. The performance evaluation showed that the signal processing and the control law of a system were the key parameters that decided the system's capability, ...

Process and impact evaluation of the Greater Christchurch Urban Development Strategy Health Impact Assessment

PubMed Central

Mathias, Kaaren R; Harris-Roxas, Ben

2009-01-01

Background despite health impact assessment (HIA) being increasingly widely used internationally, fundamental questions about its impact on decision-making, implementation and practices remain. In 2005 a collaboration between public health and local government authorities performed an HIA on the Christchurch Urban Development Strategy Options paper in New Zealand. The findings of this were incorporated into the Greater Christchurch Urban Development Strategy; Methods using multiple qualitative methodologies including key informant interviews, focus groups and questionnaires, this study performs process and impact evaluations of the Christchurch HIA including evaluation of costs and resource use; Results the evaluation found that the HIA had demonstrable direct impacts on planning and implementation of the final Urban Development Strategy as well as indirect impacts on understandings and ways of working within and between organisations. It also points out future directions and ways of working in this successful collaboration between public health and local government authorities. It summarises the modest resource use and discusses the important role HIA can play in urban planning with intersectoral collaboration and enhanced relationships as both catalysts and outcomes of the HIA process; Conclusion as one of the few evaluations of HIA that have been published to date, this paper makes a substantial contribution to the literature on the impact, utility and effectiveness of HIA. PMID:19344529

Iterative performance assessments as a regulatory tool for evaluating repository safety: How experiences from SKI Project-90 were used in formulating the new performance assessment project SITE-94

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersson, J.

1993-12-31

The Swedish Nuclear Power Inspectorate, SKI, regulatory research program has to prepare for the process of licensing a repository for spent nuclear fuel, by building up the necessary knowledge and review capacity. SKIs main strategy for meeting this demand is to develop an independent performance assessment capability. SKIs first own performance assessment project, Project-90, was completed in 1991 and is now followed by a new project, SITE-94. SITE-94 is based on conclusions reached within Project-90. An independent review of Project-90, carried out by a NEA team of experts, has also contributed to the formation of the project. Another important reasonmore » for the project is that the implementing organization in Sweden, SKB, has proposed to submit an application to start detailed investigation of a repository candidate site around 1997. SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process, and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. This will be addressed by exploring multiple interpretations, conceptual models, and parameters consistent with the site data. The site evaluation will strive for consistency between geological, hydrological, rock mechanical, and geochemical descriptions. Other important elements of SITE-94 are the development of a practical and defensible methodology for defining, constructing and analyzing scenarios, the development of approaches for treatment of uncertainties, evaluation of canister integrity, and the development and application of an appropriate quality assurance plan for performance assessments.« less

The Vanderbilt Professional Nursing Practice Program: part 1: Growing and supporting professional nursing practice.

PubMed

Robinson, Karen; Eck, Carol; Keck, Becky; Wells, Nancy

2003-09-01

Professional practice programs are designed to attract, retain, and reward nurses. This three-part series will describe Vanderbilt's performance-based career advancement system, the Vanderbilt Professional Nursing Practice Program (VPNPP). Part 1 outlines the overall program's foundation, philosophical background, and basic structure. The VPNPP is built upon Benner's work, distinguishing among four levels of practice: novice, competent, proficient, and expert. Work by many in the organization identified the expected behaviors for nurses at each level, which were then used to develop clear process evaluation criteria. Part 2 will examine the performance measurement and evaluation system created to support the program. The process of advancing within the program will be described in part 3.

Process simulations for manufacturing of thick composites

NASA Astrophysics Data System (ADS)

Kempner, Evan A.

The availability of manufacturing simulations for composites can significantly reduce the costs associated with process development. Simulations provide a tool for evaluating the effect of processing conditions on the quality of parts produced without requiring numerous experiments. This is especially significant in parts that have troublesome features such as large thickness. The development of simulations for thick walled composites has been approached by examining the mechanics of resin flow and fiber deformation during processing, applying these evaluations to develop simulations, and evaluating the simulation with experimental results. A unified analysis is developed to describe the three-dimensional resin flow and fiber preform deformation during processing regardless of the manufacturing process used. It is shown how the generic governing evaluations in the unified analysis can be applied to autoclave molding, compression molding, pultrusion, filament winding, and resin transfer molding. A comparison is provided with earlier models derived individually for these processes. The evaluations described for autoclave curing were used to produce a one-dimensional cure simulation for autoclave curing of thick composites. The simulation consists of an analysis for heat transfer and resin flow in the composite as well as bleeder plies used to absorb resin removed from the part. Experiments were performed in a hot press to approximate curing in an autoclave. Graphite/epoxy laminates of 3 cm and 5 cm thickness were cured while monitoring temperatures at several points inside the laminate and thickness. The simulation predicted temperatures fairly closely, but difficulties were encountered in correlation of thickness results. This simulation was also used to study the effects of prepreg aging on processing of thick composites. An investigation was also performed on filament winding with prepreg tow. Cylinders were wound of approximately 12 mm thickness with pressure gages at the mandrel-composite interface. Cylinders were hoop wound with tensions ranging from 13-34 N. An analytical model was developed to calculate change in stress due to relaxation during winding. Although compressive circumferential stresses occurred throughout each of the cylinders, the magnitude was fairly low.

Need for certification of household water treatment products: examples from Haiti.

PubMed

Murray, Anna; Pierre-Louis, Jocelyne; Joseph, Flaurine; Sylvain, Ginelove; Patrick, Molly; Lantagne, Daniele

2015-04-01

To evaluate four household water treatment (HWT) products currently seeking approval for distribution in Haiti, through the application of a recently-developed national HWT product certification process. Four chemical treatment products were evaluated against the certification process validation stage by verifying international product certifications confirming treatment efficacy and reviewing laboratory efficacy data against WHO HWT microbiological performance targets; and against the approval stage by confirming product composition, evaluating treated water chemical content against national and international drinking water quality guidelines and reviewing packaging for dosing ability and usage directions in Creole. None of the four evaluated products fulfilled validation or approval stage requirements. None was certified by an international agency as efficacious for drinking water treatment, and none had data demonstrating its ability to meet WHO HWT performance targets. All product sample compositions differed from labelled composition by >20%, and no packaging included complete usage directions in Creole. Product manufacturers provided information that was inapplicable, did not demonstrate product efficacy, and was insufficient to ensure safe product use. Capacity building is needed with country regulatory agencies to objectively evaluate HWT products. Products should be internationally assessed against WHO performance targets and also locally approved, considering language, culture and usability, to ensure effective HWT. © 2014 John Wiley & Sons Ltd.

Need for certification of household water treatment products: examples from Haiti

PubMed Central

Murray, Anna; Pierre-Louis, Jocelyne; Joseph, Flaurine; Sylvain, Ginelove; Patrick, Molly; Lantagne, Daniele

2015-01-01

OBJECTIVE To evaluate four household water treatment (HWT) products currently seeking approval for distribution in Haiti, through the application of a recently-developed national HWT product certification process. METHODS Four chemical treatment products were evaluated against the certification process validation stage by verifying international product certifications confirming treatment efficacy and reviewing laboratory efficacy data against WHO HWT microbiological performance targets; and against the approval stage by confirming product composition, evaluating treated water chemical content against national and international drinking water quality guidelines and reviewing packaging for dosing ability and usage directions in Creole. RESULTS None of the four evaluated products fulfilled validation or approval stage requirements. None was certified by an international agency as efficacious for drinking water treatment, and none had data demonstrating its ability to meet WHO HWT performance targets. All product sample compositions differed from labelled composition by >20%, and no packaging included complete usage directions in Creole. CONCLUSIONS Product manufacturers provided information that was inapplicable, did not demonstrate product efficacy, and was insufficient to ensure safe product use. Capacity building is needed with country regulatory agencies to objectively evaluate HWT products. Products should be internationally assessed against WHO performance targets and also locally approved, considering language, culture and usability, to ensure effective HWT. PMID:25441711

A multi-site cognitive task analysis for biomedical query mediation.

PubMed

Hruby, Gregory W; Rasmussen, Luke V; Hanauer, David; Patel, Vimla L; Cimino, James J; Weng, Chunhua

2016-09-01

To apply cognitive task analyses of the Biomedical query mediation (BQM) processes for EHR data retrieval at multiple sites towards the development of a generic BQM process model. We conducted semi-structured interviews with eleven data analysts from five academic institutions and one government agency, and performed cognitive task analyses on their BQM processes. A coding schema was developed through iterative refinement and used to annotate the interview transcripts. The annotated dataset was used to reconstruct and verify each BQM process and to develop a harmonized BQM process model. A survey was conducted to evaluate the face and content validity of this harmonized model. The harmonized process model is hierarchical, encompassing tasks, activities, and steps. The face validity evaluation concluded the model to be representative of the BQM process. In the content validity evaluation, out of the 27 tasks for BQM, 19 meet the threshold for semi-valid, including 3 fully valid: "Identify potential index phenotype," "If needed, request EHR database access rights," and "Perform query and present output to medical researcher", and 8 are invalid. We aligned the goals of the tasks within the BQM model with the five components of the reference interview. The similarity between the process of BQM and the reference interview is promising and suggests the BQM tasks are powerful for eliciting implicit information needs. We contribute a BQM process model based on a multi-site study. This model promises to inform the standardization of the BQM process towards improved communication efficiency and accuracy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

A Multi-Site Cognitive Task Analysis for Biomedical Query Mediation

PubMed Central

Hruby, Gregory W.; Rasmussen, Luke V.; Hanauer, David; Patel, Vimla; Cimino, James J.; Weng, Chunhua

2016-01-01

Objective To apply cognitive task analyses of the Biomedical query mediation (BQM) processes for EHR data retrieval at multiple sites towards the development of a generic BQM process model. Materials and Methods We conducted semi-structured interviews with eleven data analysts from five academic institutions and one government agency, and performed cognitive task analyses on their BQM processes. A coding schema was developed through iterative refinement and used to annotate the interview transcripts. The annotated dataset was used to reconstruct and verify each BQM process and to develop a harmonized BQM process model. A survey was conducted to evaluate the face and content validity of this harmonized model. Results The harmonized process model is hierarchical, encompassing tasks, activities, and steps. The face validity evaluation concluded the model to be representative of the BQM process. In the content validity evaluation, out of the 27 tasks for BQM, 19 meet the threshold for semi-valid, including 3 fully valid: “Identify potential index phenotype,” “If needed, request EHR database access rights,” and “Perform query and present output to medical researcher”, and 8 are invalid. Discussion We aligned the goals of the tasks within the BQM model with the five components of the reference interview. The similarity between the process of BQM and the reference interview is promising and suggests the BQM tasks are powerful for eliciting implicit information needs. Conclusions We contribute a BQM process model based on a multi-site study. This model promises to inform the standardization of the BQM process towards improved communication efficiency and accuracy. PMID:27435950

Content validation using an expert panel: assessment process for assistive technology adopted by farmers with disabilities.

PubMed

Mathew, S N; Field, W E; French, B F

2011-07-01

This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.

Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

NASA Technical Reports Server (NTRS)

Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

2001-01-01

The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

Mayo clinical Text Analysis and Knowledge Extraction System (cTAKES): architecture, component evaluation and applications

PubMed Central

Masanz, James J; Ogren, Philip V; Zheng, Jiaping; Sohn, Sunghwan; Kipper-Schuler, Karin C; Chute, Christopher G

2010-01-01

We aim to build and evaluate an open-source natural language processing system for information extraction from electronic medical record clinical free-text. We describe and evaluate our system, the clinical Text Analysis and Knowledge Extraction System (cTAKES), released open-source at http://www.ohnlp.org. The cTAKES builds on existing open-source technologies—the Unstructured Information Management Architecture framework and OpenNLP natural language processing toolkit. Its components, specifically trained for the clinical domain, create rich linguistic and semantic annotations. Performance of individual components: sentence boundary detector accuracy=0.949; tokenizer accuracy=0.949; part-of-speech tagger accuracy=0.936; shallow parser F-score=0.924; named entity recognizer and system-level evaluation F-score=0.715 for exact and 0.824 for overlapping spans, and accuracy for concept mapping, negation, and status attributes for exact and overlapping spans of 0.957, 0.943, 0.859, and 0.580, 0.939, and 0.839, respectively. Overall performance is discussed against five applications. The cTAKES annotations are the foundation for methods and modules for higher-level semantic processing of clinical free-text. PMID:20819853

Ergonomic evaluation of processes and products in the manufacture of upholstery.

PubMed

Fialho, Patrícia Bhering; de Souza, Amaury Paulo; Minette, Luciano José; Silva, José de Castro; de Oliveira, Luciana Aparecida

2012-01-01

This study aimed to perform an ergonomic evaluation of industrial processes and products - upholstered sofas - produced in the furniture cluster of Ubá-MG. The used material was collected from two sofas upholstered industries associated with the union of the furniture industries of Ubá region, located in Minas Gerais estate, Brazil. As for the product were evaluated dimensionally 29 upholstered sofas, with 12 being produced by industry "A" and 17 being produced by industry "B". As for the process, were evaluated: the socioeconomic profile of the worker and environmental factors of lighting and noise. The main results of this study showed that the upholstered sofas produced by industries, in general, fulfilled to the recommendations set out in the work in relation to the backrest height and useful seat depth. All the sofas, however, proved to be inadequate in relation to the seat height to the floor and the dimensions of the armrests Regarding environmental aspects, it was observed that in both industries, the activities in most jobs are performed under adverse conditions to the health and safety of workers and nonconformity with the limits set by Brazilian regulatory standard used in this work.

Fabrication and Improvement of Lmsc's All-silica RSI

NASA Technical Reports Server (NTRS)

Beasley, R. M.; Izu, Y. D.; Nakano, H. N.; Ozolin, A. A.; Peachman, A.

1973-01-01

The LI-1500 and LI-900 all silica RSI materials have made the transition from laboratory to manufacturing operation. Improvements in both quality and reproducibility have been achieved. The LI-1500 material has displayed superior reliability in evaluations conducted at various facilities. The dependable performance of the material is attributed to the adherence to the stringent requirements of the numerous material, process, and product control evaluations and inspection points performed during manufacture.

High temperature solar thermal receiver

NASA Technical Reports Server (NTRS)

1979-01-01

A design concept for a high temperature solar thermal receiver to operate at 3 atmospheres pressure and 2500 F outlet was developed. The performance and complexity of windowed matrix, tube-header, and extended surface receivers were evaluated. The windowed matrix receiver proved to offer substantial cost and performance benefits. An efficient and cost effective hardware design was evaluated for a receiver which can be readily interfaced to fuel and chemical processes or to heat engines for power generation.

Evaluations in support of regulatory and research decisions by the U. S. Environmental Protection Agency for the control of toxic hazards from hazardous wastes, glyphosate, dalapon, and synthetic fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scofield, R.

1984-01-01

This report includes toxicological and regulatory evaluations performed in support of U.S. EPA regulation of toxic materials and hazardous wastes. The first section of the report describes evaluations which support: (a) the regulation of small-volume generators of hazardous wastes, (b) the regulation of hazardous wastes from pesticide manufacturing, and (c) the disposal of the herbicide, silvex. The second section describes the environmental fate, transport, and effect of glyphosate and dalapon. The third section deals with synthetic fuels, including evaluations of synfuel-product toxicity, uncontrolled air emissions, and particular focus on the toxicity of products from several indirect coal liquefaction processes includingmore » methanol synthesis, Fischer-Tropsch, Mobil M-Gasoline, and Lurgi gasification technologies. Three direct coal liquefaction processes were examined for product toxicity and air emissions: Solvent Refined Coal (I and II) and the Exxon Donor Solvent Process. Also described in the third section is an evaluation of environmental and health hazards associated with the use of synthetic fuels from indirect coal liquefaction, direct coal liquefaction, and shale oil. Finally, the fourth section discusses some problems associated with performing, on a contractual basis, scientific and technical evaluations in support of U.S. EPA regulatory and research decisions.« less

Evaluating Community Engagement in an Academic Medical Center

PubMed Central

Shone, Laura P.; Dozier, Ann M.; Newton, Gail L.; Green, Theresa; Bennett, Nancy M.

2014-01-01

From the perspective of academic medical centers (AMCs), community engagement is a collaborative process of working toward mutually defined goals to improve the community’s health, and involves partnerships between AMCs, individuals, and entities representing the surrounding community. AMCs increasingly recognize the importance of community engagement, and recent programs such as Prevention Research Centers and Clinical and Translational Science Awards have highlighted community engagement activities. However, there is no standard or accepted metric for evaluating AMCs’ performance and impact of community engagement activities. In this article, the authors present a framework for evaluating AMCs’ community engagement activities. The framework includes broad goals and specific activities within each goal, wherein goals and activities are evaluated using a health services research framework consisting of structure, process, and outcome criteria. To illustrate how to use this community engagement evaluation framework, the authors present specific community engagement goals and activities of the University of Rochester Medical Center to (1) improve the health of the community served by the AMC; (2) increase the AMC’s capacity for community engagement; and (3) increase generalizable knowledge and practices in community engagement and public health. Using a structure-process-outcomes framework, a multidisciplinary team should regularly evaluate an AMC’s community engagement program with the purpose of measurably improving the performance of the AMC and the health of its surrounding community. PMID:24556768

Modeling the Hydrologic Processes of a Permeable Pavement System

EPA Science Inventory

A permeable pavement system can capture stormwater to reduce runoff volume and flow rate, improve onsite groundwater recharge, and enhance pollutant controls within the site. A new unit process model for evaluating the hydrologic performance of a permeable pavement system has be...

Performance Management and Optimization of Semiconductor Design Projects

NASA Astrophysics Data System (ADS)

Hinrichs, Neele; Olbrich, Markus; Barke, Erich

2010-06-01

The semiconductor industry is characterized by fast technological changes and small time-to-market windows. Improving productivity is the key factor to stand up to the competitors and thus successfully persist in the market. In this paper a Performance Management System for analyzing, optimizing and evaluating chip design projects is presented. A task graph representation is used to optimize the design process regarding time, cost and workload of resources. Key Performance Indicators are defined in the main areas cost, profit, resources, process and technical output to appraise the project.

Smith predictor with sliding mode control for processes with large dead times

NASA Astrophysics Data System (ADS)

Mehta, Utkal; Kaya, İbrahim

2017-11-01

The paper discusses the Smith Predictor scheme with Sliding Mode Controller (SP-SMC) for processes with large dead times. This technique gives improved load-disturbance rejection with optimum input control signal variations. A power rate reaching law is incorporated in the sporadic part of sliding mode control such that the overall performance recovers meaningfully. The proposed scheme obtains parameter values by satisfying a new performance index which is based on biobjective constraint. In simulation study, the efficiency of the method is evaluated for robustness and transient performance over reported techniques.

Comparative performance evaluation of transform coding in image pre-processing

NASA Astrophysics Data System (ADS)

Menon, Vignesh V.; NB, Harikrishnan; Narayanan, Gayathri; CK, Niveditha

2017-07-01

We are in the midst of a communication transmute which drives the development as largely as dissemination of pioneering communication systems with ever-increasing fidelity and resolution. Distinguishable researches have been appreciative in image processing techniques crazed by a growing thirst for faster and easier encoding, storage and transmission of visual information. In this paper, the researchers intend to throw light on many techniques which could be worn at the transmitter-end in order to ease the transmission and reconstruction of the images. The researchers investigate the performance of different image transform coding schemes used in pre-processing, their comparison, and effectiveness, the necessary and sufficient conditions, properties and complexity in implementation. Whimsical by prior advancements in image processing techniques, the researchers compare various contemporary image pre-processing frameworks- Compressed Sensing, Singular Value Decomposition, Integer Wavelet Transform on performance. The paper exposes the potential of Integer Wavelet transform to be an efficient pre-processing scheme.

Economic Evaluation of a Hybrid Desalination System Combining Forward and Reverse Osmosis

PubMed Central

Choi, Yongjun; Cho, Hyeongrak; Shin, Yonghyun; Jang, Yongsun; Lee, Sangho

2015-01-01

This study seeks to evaluate the performance and economic feasibility of the forward osmosis (FO)–reverse osmosis (RO) hybrid process; to propose a guideline by which this hybrid process might be more price-competitive in the field. A solution-diffusion model modified with film theory was applied to analyze the effects of concentration polarization, water, and salt transport coefficient on flux, recovery, seawater concentration, and treated wastewater of the FO process of an FO-RO hybrid system. A simple cost model was applied to analyze the effects of flux; recovery of the FO process; energy; and membrane cost on the FO-RO hybrid process. The simulation results showed that the water transport coefficient and internal concentration polarization resistance are very important factors that affect performance in the FO process; however; the effect of the salt transport coefficient does not seem to be large. It was also found that the flux and recovery of the FO process, the FO membrane, and the electricity cost are very important factors that influence the water cost of an FO-RO hybrid system. This hybrid system can be price-competitive with RO systems when its recovery rate is very high, the flux and the membrane cost of the FO are similar to those of the RO, and the electricity cost is expensive. The most important thing in commercializing the FO process is enhancing performance (e.g.; flux and the recovery of FO membranes). PMID:26729176

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salama, A.; Mikhail, M.

Comprehensive software packages have been developed at the Western Research Centre as tools to help coal preparation engineers analyze, evaluate, and control coal cleaning processes. The COal Preparation Software package (COPS) performs three functions: (1) data handling and manipulation, (2) data analysis, including the generation of washability data, performance evaluation and prediction, density and size modeling, evaluation of density and size partition characteristics and attrition curves, and (3) generation of graphics output. The Separation ChARacteristics Estimation software packages (SCARE) are developed to balance raw density or size separation data. The cases of density and size separation data are considered. Themore » generated balanced data can take the balanced or normalized forms. The scaled form is desirable for direct determination of the partition functions (curves). The raw and generated separation data are displayed in tabular and/or graphical forms. The computer softwares described in this paper are valuable tools for coal preparation plant engineers and operators for evaluating process performance, adjusting plant parameters, and balancing raw density or size separation data. These packages have been applied very successfully in many projects carried out by WRC for the Canadian coal preparation industry. The software packages are designed to run on a personal computer (PC).« less

Automated Synthesis of Architecture of Avionic Systems

NASA Technical Reports Server (NTRS)

Chau, Savio; Xu, Joseph; Dang, Van; Lu, James F.

2006-01-01

The Architecture Synthesis Tool (AST) is software that automatically synthesizes software and hardware architectures of avionic systems. The AST is expected to be most helpful during initial formulation of an avionic-system design, when system requirements change frequently and manual modification of architecture is time-consuming and susceptible to error. The AST comprises two parts: (1) an architecture generator, which utilizes a genetic algorithm to create a multitude of architectures; and (2) a functionality evaluator, which analyzes the architectures for viability, rejecting most of the non-viable ones. The functionality evaluator generates and uses a viability tree a hierarchy representing functions and components that perform the functions such that the system as a whole performs system-level functions representing the requirements for the system as specified by a user. Architectures that survive the functionality evaluator are further evaluated by the selection process of the genetic algorithm. Architectures found to be most promising to satisfy the user s requirements and to perform optimally are selected as parents to the next generation of architectures. The foregoing process is iterated as many times as the user desires. The final output is one or a few viable architectures that satisfy the user s requirements.

Roll-to-Roll Advanced Materials Manufacturing DOE Lab Consortium - FY16 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, Claus; Wood, III, David L.; Krumdick, Gregory

2016-12-01

A DOE laboratory consortium comprised of ORNL, ANL, NREL and LBNL, coordinating with Kodak’s Eastman Business Park (Kodak) and other selected industry partners, was formed to address enhancing battery electrode performance and R2R manufacturing challenges. The objective of the FY 2016 seed project was to develop a materials genome synthesis process amenable to R2R manufacturing and to provide modeling, simulation, processing, and manufacturing techniques that demonstrate the feasibility of process controls and scale-up potential for improved battery electrodes. The research efforts were to predict and measure changes and results in electrode morphology and performance based on process condition changes; tomore » evaluate mixed, active, particle size deposition and drying for novel electrode materials; and to model various process condition changes and the resulting morphology and electrode performance.« less

Teacher Performance: Do We Know What We are Evaluating?

ERIC Educational Resources Information Center

Goldbas, Mervyn; And Others

This study was designed to provide the teacher trainers at State University College, Fredonia, New York with information to identify the actual criteria upon which student teachers were being evaluated and to provide a basis for altering the evaluation process so that it would measure more validly the degree to which objectives of the field…

Technology Evaluation Tools and Teacher Performance in Public Schools

ERIC Educational Resources Information Center

Stonehouse, Pauline; Keengwe, Jared

2013-01-01

The purpose of this study was, (a) to describe the introduction of mVAL software and Charlotte Danielson Rubrics (CDR) as teacher evaluation tools; (b) to compare the process and outcomes of the new initiative with traditional systems; and (c) to evaluate the software from the perspective of participants in the system. This study highlights the…

Interrater Reliability among Elementary Principals Using the North Carolina Teacher Evaluation Process

ERIC Educational Resources Information Center

Mazurek, Sharon Ann

2012-01-01

Teacher observation remains one of the primary data collection methods for analyzing teaching behaviors. States use various evaluation instruments and current trends across the United States show that more states are working to tie teacher evaluation to student performance. The purpose of this study was to determine to what extent there was…

The process audit.

PubMed

Hammer, Michael

2007-04-01

Few executives question the idea that by redesigning business processes--work that runs from end to end across an enterprise--they can achieve extraordinary improvements in cost, quality, speed, profitability, and other key areas Yet in spite of their intentions and investments, many executives flounder, unsure about what exactly needs to be changed, by how much, and when. As a result, many organizations make little progress--if any at all--in their attempts to transform business processes. Michael Hammer has spent the past five years working with a group of leading companies to develop the Process and Enterprise Maturity Model (PEMM), a new framework that helps executives comprehend, formulate, and assess process-based transformation efforts. He has identified two distinct groups of characteristics that are needed for business processes to perform exceptionally well over a long period of time. Process enablers, which affect individual processes, determine how well a process is able to function. They are mutually interdependent--if any are missing, the others will be ineffective. However, enablers are not enough to develop high-performance processes; they only provide the potential to deliver high performance. A company must also possess or establish organizational capabilities that allow the business to offer a supportive environment. Together, the enablers and the capabilities provide an effective way for companies to plan and evaluate process-based transformations. PEMM is different from other frameworks, such as Capability Maturity Model Integration (CMMI), because it applies to all industries and all processes. The author describes how several companies--including Michelin, CSAA, Tetra Pak, Shell, Clorox, and Schneider National--have successfully used PEMM in various ways and at different stages to evaluate the progress of their process-based transformation efforts.

Research on comprehensive performance evaluation technology of wind turbine based on Analytic Hierarchy Process

NASA Astrophysics Data System (ADS)

Huang, Xiangsheng; Zhong, Mingqiu; Li, Ying; Yang, Hongyuan

2018-05-01

High-power of the offshore wind turbine is in the early stage of development, then how to establish a scientific and impartial performance evaluation system of the offshore wind turbine becomes the key to the health development of the industry. This paper adopts the method of multi-level analysis and site testing, which can reduce the impact of human factors on evaluation to the most extent. A more reasonable judging criterion with the relative importance of different factors of the same criterion level is also put forward, which constructs a more scientific and fair evaluation system of the high-power offshore wind turbine.

Welding, V-TECS Guide.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

This guide provides job-related tasks, performance objectives, performance guides, resources, teaching activities, evaluation standards, and criterion-referenced measures in three units of a welding course. Through the curriculum content of the welding course, the guide helps teachers lead students through the learning process, including the…

Error Reduction Program. [combustor performance evaluation codes

NASA Technical Reports Server (NTRS)

Syed, S. A.; Chiappetta, L. M.; Gosman, A. D.

1985-01-01

The details of a study to select, incorporate and evaluate the best available finite difference scheme to reduce numerical error in combustor performance evaluation codes are described. The combustor performance computer programs chosen were the two dimensional and three dimensional versions of Pratt & Whitney's TEACH code. The criteria used to select schemes required that the difference equations mirror the properties of the governing differential equation, be more accurate than the current hybrid difference scheme, be stable and economical, be compatible with TEACH codes, use only modest amounts of additional storage, and be relatively simple. The methods of assessment used in the selection process consisted of examination of the difference equation, evaluation of the properties of the coefficient matrix, Taylor series analysis, and performance on model problems. Five schemes from the literature and three schemes developed during the course of the study were evaluated. This effort resulted in the incorporation of a scheme in 3D-TEACH which is usuallly more accurate than the hybrid differencing method and never less accurate.

Deriving evaluation indicators for knowledge transfer and dialogue processes in the context of climate research

NASA Astrophysics Data System (ADS)

Treffeisen, Renate; Grosfeld, Klaus; Kuhlmann, Franziska

2017-12-01

Knowledge transfer and dialogue processes in the field of climate science have captured intensive attention in recent years as being an important part of research activities. Therefore, the demand and pressure to develop a set of indicators for the evaluation of different activities in this field have increased, too. Research institutes are being asked more and more to build up structures in order to map these activities and, thus, are obliged to demonstrate the success of these efforts. This paper aims to serve as an input to stimulate further reflection on the field of evaluation of knowledge transfer and dialogue processes in the context of climate sciences. The work performed in this paper is embedded in the efforts of the German Helmholtz Association in the research field of earth and environment and is driven by the need to apply suitable indicators for knowledge transfer and dialogue processes in climate research center evaluations. We carry out a comparative analysis of three long-term activities and derive a set of indicators for measuring their output and outcome by balancing the wide diversity and range of activity contents as well as the different tools to realize them. The case examples are based on activities which are part of the regional Helmholtz Climate Initiative Regional Climate Change (REKLIM) and the Climate Office for Polar Regions and Sea Level Rise at the Alfred Wegener Institute Helmholtz Centre for Polar and Marine Research. Both institutional units have been working on a wide range of different knowledge transfer and dialogue processes since 2008/2009. We demonstrate that indicators for the evaluation must be based on the unique objectives of the individual activities and the framework they are embedded in (e.g., research foci which provide the background for the performed knowledge transfer and dialogue processes) but can partly be classified in a principle two-dimensional scheme. This scheme might serve as a usable basis for climate research center evaluation in the future. It, furthermore, underlines the need for further development of proper mechanisms to evaluate scientific centers, in particular with regard to knowledge transfer and dialogue processes.

Improving environmental impact and cost assessment for supplier evaluation

NASA Astrophysics Data System (ADS)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

NASA Technical Reports Server (NTRS)

Rohatgi, Naresh K.; Ingham, John D.

1992-01-01

An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

Spectral OCT with speckle contrast reduction for evaluation of the healing process after PRK and transepithelial PRK.

PubMed

Kaluzny, Bartlomiej J; Szkulmowski, Maciej; Bukowska, Danuta M; Wojtkowski, Maciej

2014-04-01

We evaluate Spectral OCT (SOCT) with a speckle contrast reduction technique using resonant scanner for assessment of corneal surface changes after excimer laser photorefractive keratectomy (PRK) and we compare healing process between conventional PRK and transepithelial PRK. The measurements were performed before and after the surgery. Obtained results show that SOCT with a resonant scanner speckle contrast reduction is capable of providing information regarding the healing process after PRK. The main difference between the healing processes of PRK and TransPRK, assessed by SOCT, was the time to cover the stroma with epithelium, which was shorter in the TransPRK group.

Performance Evaluation and Parameter Identification on DROID III

NASA Technical Reports Server (NTRS)

Plumb, Julianna J.

2011-01-01

The DROID III project consisted of two main parts. The former, performance evaluation, focused on the performance characteristics of the aircraft such as lift to drag ratio, thrust required for level flight, and rate of climb. The latter, parameter identification, focused on finding the aerodynamic coefficients for the aircraft using a system that creates a mathematical model to match the flight data of doublet maneuvers and the aircraft s response. Both portions of the project called for flight testing and that data is now available on account of this project. The conclusion of the project is that the performance evaluation data is well-within desired standards but could be improved with a thrust model, and that parameter identification is still in need of more data processing but seems to produce reasonable results thus far.

Two-structured solid particle model for predicting and analyzing supercritical extraction performance.

PubMed

Samadi, Sara; Vaziri, Behrooz Mahmoodzadeh

2017-07-14

Solid extraction process, using the supercritical fluid, is a modern science and technology, which has come in vogue regarding its considerable advantages. In the present article, a new and comprehensive model is presented for predicting the performance and separation yield of the supercritical extraction process. The base of process modeling is partial differential mass balances. In the proposed model, the solid particles are considered twofold: (a) particles with intact structure, (b) particles with destructed structure. A distinct mass transfer coefficient has been used for extraction of each part of solid particles to express different extraction regimes and to evaluate the process accurately (internal mass transfer coefficient was used for the intact-structure particles and external mass transfer coefficient was employed for the destructed-structure particles). In order to evaluate and validate the proposed model, the obtained results from simulations were compared with two series of available experimental data for extraction of chamomile extract with supercritical carbon dioxide, which had an excellent agreement. This is indicative of high potentiality of the model in predicting the extraction process, precisely. In the following, the effect of major parameters on supercritical extraction process, like pressure, temperature, supercritical fluid flow rate, and the size of solid particles was evaluated. The model can be used as a superb starting point for scientific and experimental applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Determining the Effectiveness and Evaluating the Implementation Process of a Quality/Performance Circles System Model to Assist in Institutional Decision Making and Problem Solving at Lakeshore Technical Institute.

ERIC Educational Resources Information Center

Ladwig, Dennis J.

During the 1982-83 school year, a quality/performance circles system model was implemented at Lakeshore Technical Institute (LTI) to promote greater participation by staff in decision making and problem solving. All management staff at the college (N=45) were invited to participate in the process, and 39 volunteered. Non-management staff (N=240)…

Understanding product cost vs. performance through an in-depth system Monte Carlo analysis

NASA Astrophysics Data System (ADS)

Sanson, Mark C.

2017-08-01

The manner in which an optical system is toleranced and compensated greatly affects the cost to build it. By having a detailed understanding of different tolerance and compensation methods, the end user can decide on the balance of cost and performance. A detailed phased approach Monte Carlo analysis can be used to demonstrate the tradeoffs between cost and performance. In complex high performance optical systems, performance is fine-tuned by making adjustments to the optical systems after they are initially built. This process enables the overall best system performance, without the need for fabricating components to stringent tolerance levels that often can be outside of a fabricator's manufacturing capabilities. A good performance simulation of as built performance can interrogate different steps of the fabrication and build process. Such a simulation may aid the evaluation of whether the measured parameters are within the acceptable range of system performance at that stage of the build process. Finding errors before an optical system progresses further into the build process saves both time and money. Having the appropriate tolerances and compensation strategy tied to a specific performance level will optimize the overall product cost.

Evaluation and testing of image quality of the Space Solar Extreme Ultraviolet Telescope

NASA Astrophysics Data System (ADS)

Peng, Jilong; Yi, Zhong; Zhou, Shuhong; Yu, Qian; Hou, Yinlong; Wang, Shanshan

2018-01-01

For the space solar extreme ultraviolet telescope, the star point test can not be performed in the x-ray band (19.5nm band) as there is not light source of bright enough. In this paper, the point spread function of the optical system is calculated to evaluate the imaging performance of the telescope system. Combined with the actual processing surface error, such as small grinding head processing and magnetorheological processing, the optical design software Zemax and data analysis software Matlab are used to directly calculate the system point spread function of the space solar extreme ultraviolet telescope. Matlab codes are programmed to generate the required surface error grid data. These surface error data is loaded to the specified surface of the telescope system by using the communication technique of DDE (Dynamic Data Exchange), which is used to connect Zemax and Matlab. As the different processing methods will lead to surface error with different size, distribution and spatial frequency, the impact of imaging is also different. Therefore, the characteristics of the surface error of different machining methods are studied. Combining with its position in the optical system and simulation its influence on the image quality, it is of great significance to reasonably choose the processing technology. Additionally, we have also analyzed the relationship between the surface error and the image quality evaluation. In order to ensure the final processing of the mirror to meet the requirements of the image quality, we should choose one or several methods to evaluate the surface error according to the different spatial frequency characteristics of the surface error.

Local spatio-temporal analysis in vision systems

NASA Astrophysics Data System (ADS)

Geisler, Wilson S.; Bovik, Alan; Cormack, Lawrence; Ghosh, Joydeep; Gildeen, David

1994-07-01

The aims of this project are the following: (1) develop a physiologically and psychophysically based model of low-level human visual processing (a key component of which are local frequency coding mechanisms); (2) develop image models and image-processing methods based upon local frequency coding; (3) develop algorithms for performing certain complex visual tasks based upon local frequency representations, (4) develop models of human performance in certain complex tasks based upon our understanding of low-level processing; and (5) develop a computational testbed for implementing, evaluating and visualizing the proposed models and algorithms, using a massively parallel computer. Progress has been substantial on all aims. The highlights include the following: (1) completion of a number of psychophysical and physiological experiments revealing new, systematic and exciting properties of the primate (human and monkey) visual system; (2) further development of image models that can accurately represent the local frequency structure in complex images; (3) near completion in the construction of the Texas Active Vision Testbed; (4) development and testing of several new computer vision algorithms dealing with shape-from-texture, shape-from-stereo, and depth-from-focus; (5) implementation and evaluation of several new models of human visual performance; and (6) evaluation, purchase and installation of a MasPar parallel computer.

23 CFR 924.13 - Evaluation.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Ensure the accuracy and currency of the safety data; (ii) Identify factors that affect the priority of... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... reaching the performance goals identified in § 924.9(a)(3)(ii)(G). (2) Include a process to evaluate the...

Strategic planning processes and hospital financial performance.

PubMed

Kaissi, Amer A; Begun, James W

2008-01-01

Many common management practices in healthcare organizations, including the practice of strategic planning, have not been subject to widespread assessment through empirical research. If management practice is to be evidence-based, evaluations of such common practices need to be undertaken. The purpose of this research is to provide evidence on the extent of strategic planning practices and the association between hospital strategic planning processes and financial performance. In 2006, we surveyed a sample of 138 chief executive officers (CEOs) of hospitals in the state of Texas about strategic planning in their organizations and collected financial information on the hospitals for 2003. Among the sample hospitals, 87 percent reported having a strategic plan, and most reported that they followed a variety of common practices recommended for strategic planning-having a comprehensive plan, involving physicians, involving the board, and implementing the plan. About one-half of the hospitals assigned responsibility for the plan to the CEO. We tested the association between these planning characteristics in 2006 and two measures of financial performance for 2003. Three dimensions of the strategic planning process--having a strategic plan, assigning the CEO responsibility for the plan, and involving the board--are positively associated with earlier financial performance. Further longitudinal studies are needed to evaluate the cause-and-effect relationship between planning and performance.

Tree Alignment Based on Needleman-Wunsch Algorithm for Sensor Selection in Smart Homes.

PubMed

Chua, Sook-Ling; Foo, Lee Kien

2017-08-18

Activity recognition in smart homes aims to infer the particular activities of the inhabitant, the aim being to monitor their activities and identify any abnormalities, especially for those living alone. In order for a smart home to support its inhabitant, the recognition system needs to learn from observations acquired through sensors. One question that often arises is which sensors are useful and how many sensors are required to accurately recognise the inhabitant's activities? Many wrapper methods have been proposed and remain one of the popular evaluators for sensor selection due to its superior accuracy performance. However, they are prohibitively slow during the evaluation process and may run into the risk of overfitting due to the extent of the search. Motivated by this characteristic, this paper attempts to reduce the cost of the evaluation process and overfitting through tree alignment. The performance of our method is evaluated on two public datasets obtained in two distinct smart home environments.

Seeing the System through the End Users' Eyes: Shadow Expert Technique for Evaluating the Consistency of a Learning Management System

NASA Astrophysics Data System (ADS)

Holzinger, Andreas; Stickel, Christian; Fassold, Markus; Ebner, Martin

Interface consistency is an important basic concept in web design and has an effect on performance and satisfaction of end users. Consistency also has significant effects on the learning performance of both expert and novice end users. Consequently, the evaluation of consistency within a e-learning system and the ensuing eradication of irritating discrepancies in the user interface redesign is a big issue. In this paper, we report of our experiences with the Shadow Expert Technique (SET) during the evaluation of the consistency of the user interface of a large university learning management system. The main objective of this new usability evaluation method is to understand the interaction processes of end users with a specific system interface. Two teams of usability experts worked independently from each other in order to maximize the objectivity of the results. The outcome of this SET method is a list of recommended changes to improve the user interaction processes, hence to facilitate high consistency.

Resource and Performance Evaluations of Fixed Point QRD-RLS Systolic Array through FPGA Implementation

NASA Astrophysics Data System (ADS)

Yokoyama, Yoshiaki; Kim, Minseok; Arai, Hiroyuki

At present, when using space-time processing techniques with multiple antennas for mobile radio communication, real-time weight adaptation is necessary. Due to the progress of integrated circuit technology, dedicated processor implementation with ASIC or FPGA can be employed to implement various wireless applications. This paper presents a resource and performance evaluation of the QRD-RLS systolic array processor based on fixed-point CORDIC algorithm with FPGA. In this paper, to save hardware resources, we propose the shared architecture of a complex CORDIC processor. The required precision of internal calculation, the circuit area for the number of antenna elements and wordlength, and the processing speed will be evaluated. The resource estimation provides a possible processor configuration with a current FPGA on the market. Computer simulations assuming a fading channel will show a fast convergence property with a finite number of training symbols. The proposed architecture has also been implemented and its operation was verified by beamforming evaluation through a radio propagation experiment.

Restoration of color in a remote sensing image and its quality evaluation

NASA Astrophysics Data System (ADS)

Zhang, Zuxun; Li, Zhijiang; Zhang, Jianqing; Wang, Zhihe

2003-09-01

This paper is focused on the restoration of color remote sensing (including airborne photo). A complete approach is recommended. It propose that two main aspects should be concerned in restoring a remote sensing image, that are restoration of space information, restoration of photometric information. In this proposal, the restoration of space information can be performed by making the modulation transfer function (MTF) as degradation function, in which the MTF is obtained by measuring the edge curve of origin image. The restoration of photometric information can be performed by improved local maximum entropy algorithm. What's more, a valid approach in processing color remote sensing image is recommended. That is splits the color remote sensing image into three monochromatic images which corresponding three visible light bands and synthesizes the three images after being processed separately with psychological color vision restriction. Finally, three novel evaluation variables are obtained based on image restoration to evaluate the image restoration quality in space restoration quality and photometric restoration quality. An evaluation is provided at last.

The effect of primary sedimentation on full-scale WWTP nutrient removal performance.

PubMed

Puig, S; van Loosdrecht, M C M; Flameling, A G; Colprim, J; Meijer, S C F

2010-06-01

Traditionally, the performance of full-scale wastewater treatment plants (WWTPs) is measured based on influent and/or effluent and waste sludge flows and concentrations. Full-scale WWTP data typically have a high variance which often contains (large) measurement errors. A good process engineering evaluation of the WWTP performance is therefore difficult. This also makes it usually difficult to evaluate effect of process changes in a plant or compare plants to each other. In this paper we used a case study of a full-scale nutrient removing WWTP. The plant normally uses presettled wastewater, as a means to increase the nutrient removal the plant was operated for a period by-passing raw wastewater (27% of the influent flow). The effect of raw wastewater addition has been evaluated by different approaches: (i) influent characteristics, (ii) design retrofit, (iii) effluent quality, (iv) removal efficiencies, (v) activated sludge characteristics, (vi) microbial activity tests and FISH analysis and, (vii) performance assessment based on mass balance evaluation. This paper demonstrates that mass balance evaluation approach helps the WWTP engineers to distinguish and quantify between different strategies, where others could not. In the studied case, by-passing raw wastewater (27% of the influent flow) directly to the biological reactor did not improve the effluent quality and the nutrient removal efficiency of the WWTP. The increase of the influent C/N and C/P ratios was associated to particulate compounds with low COD/VSS ratio and a high non-biodegradable COD fraction. Copyright 2010 Elsevier Ltd. All rights reserved.

School nurse evaluations: making the process meaningful and motivational.

PubMed

McDaniel, Kathryn H; Overman, Muriel; Guttu, Martha; Engelke, Martha Keehner

2013-02-01

The professional standards of school nursing practice provide a framework to help school nurses focus on their unique mission of promoting health and academic achievement for all students. Without the standards, the nurse's role can become task oriented and limited in scope. By using an evaluation tool that reflects the standards, nurses not only become aware and begin to understand the standards; they also become directly accountable for meeting them. In addition, developing an evaluation process based on the standards of school nurse practice increases the visibility of school nurses and helps school administrators understand the role of the school nurse. This article describes how one school district integrated the scope and standards of school nursing into the job description and performance evaluation of the nurse. The process which is used to complete the evaluation in a manner that is meaningful and motivational to the school nurse is described.

Enabling aqueous processing for crack-free thick electrodes

DOE PAGES

Du, Zhijia; Rollag, K. M.; Li, J.; ...

2017-04-14

Aqueous processing of thick electrodes for Li-ion cells promises to increase energy density due to increased volume fraction of active materials, and to reduce cost due to the elimination of the toxic solvents. Here in this paper this work reports the processing and characterization of aqueous processed electrodes with high areal loading and associated full pouch cell performance. Cracking of the electrode coatings becomes a critical issue for aqueous processing of the positive electrode as areal loading increases above 20–25 mg/cm 2 (~4 mAh/cm 2). Crack initiation and propagation, which was observed during drying via optical microscopy, is related tomore » the build-up of capillary pressure during the drying process. The surface tension of water was reduced by the addition of isopropyl alcohol (IPA), which led to improved wettability and decreased capillary pressure during drying. The critical thickness (areal loading) without cracking increased gradually with increasing IPA content. The electrochemical performance was evaluated in pouch cells. Electrodes processed with water/IPA (80/20 wt%) mixture exhibited good structural integrity with good rate performance and cycling performance.« less

Developing a Three Processes Framework to Analyze Hydrologic Performance of Urban Stormwater Management in a Watershed Scale

NASA Astrophysics Data System (ADS)

Lyu, H.; Ni, G.; Sun, T.

2016-12-01

Urban stormwater management contributes to recover water cycle to a nearly natural situation. It is a challenge for analyzing the hydrologic performance in a watershed scale, since the measures are various of sorts and scales and work in different processes. A three processes framework is developed to simplify the urban hydrologic process on the surface and evaluate the urban stormwater management. The three processes include source utilization, transfer regulation and terminal detention, by which the stormwater is controlled in order or discharged. Methods for analyzing performance are based on the water controlled proportions by each process, which are calculated using USEPA Stormwater Management Model. A case study form Beijing is used to illustrate how the performance varies under a set of designed events of different return periods. This framework provides a method to assess urban stormwater management as a whole system considering the interaction between measures, and to examine if there is any weak process of an urban watershed to be improved. The results help to make better solutions of urban water crisis.

Technical and Energy Performance of an Advanced, Aqueous Ammonia-Based CO2 Capture Technology for a 500 MW Coal-Fired Power Station.

PubMed

Li, Kangkang; Yu, Hai; Feron, Paul; Tade, Moses; Wardhaugh, Leigh

2015-08-18

Using a rate-based model, we assessed the technical feasibility and energy performance of an advanced aqueous-ammonia-based postcombustion capture process integrated with a coal-fired power station. The capture process consists of three identical process trains in parallel, each containing a CO2 capture unit, an NH3 recycling unit, a water separation unit, and a CO2 compressor. A sensitivity study of important parameters, such as NH3 concentration, lean CO2 loading, and stripper pressure, was performed to minimize the energy consumption involved in the CO2 capture process. Process modifications of the rich-split process and the interheating process were investigated to further reduce the solvent regeneration energy. The integrated capture system was then evaluated in terms of the mass balance and the energy consumption of each unit. The results show that our advanced ammonia process is technically feasible and energy-competitive, with a low net power-plant efficiency penalty of 7.7%.

An Information System Development Method Connecting Business Process Modeling and its Experimental Evaluation

NASA Astrophysics Data System (ADS)

Okawa, Tsutomu; Kaminishi, Tsukasa; Kojima, Yoshiyuki; Hirabayashi, Syuichi; Koizumi, Hisao

Business process modeling (BPM) is gaining attention as a measure of analysis and improvement of the business process. BPM analyses the current business process as an AS-IS model and solves problems to improve the current business and moreover it aims to create a business process, which produces values, as a TO-BE model. However, researches of techniques that connect the business process improvement acquired by BPM to the implementation of the information system seamlessly are rarely reported. If the business model obtained by BPM is converted into UML, and the implementation can be carried out by the technique of UML, we can expect the improvement in efficiency of information system implementation. In this paper, we describe a method of the system development, which converts the process model obtained by BPM into UML and the method is evaluated by modeling a prototype of a parts procurement system. In the evaluation, comparison with the case where the system is implemented by the conventional UML technique without going via BPM is performed.

Comprehensive system models: Strategies for evaluation

NASA Technical Reports Server (NTRS)

Field, Christopher; Kutzbach, John E.; Ramanathan, V.; Maccracken, Michael C.

1992-01-01

The task of evaluating comprehensive earth system models is vast involving validations of every model component at every scale of organization, as well as tests of all the individual linkages. Even the most detailed evaluation of each of the component processes and the individual links among them should not, however, engender confidence in the performance of the whole. The integrated earth system is so rich with complex feedback loops, often involving components of the atmosphere, oceans, biosphere, and cryosphere, that it is certain to exhibit emergent properties very difficult to predict from the perspective of a narrow focus on any individual component of the system. Therefore, a substantial share of the task of evaluating comprehensive earth system models must reside at the level of whole system evaluations. Since complete, integrated atmosphere/ ocean/ biosphere/ hydrology models are not yet operational, questions of evaluation must be addressed at the level of the kinds of earth system processes that the models should be competent to simulate, rather than at the level of specific performance criteria. Here, we have tried to identify examples of earth system processes that are difficult to simulate with existing models and that involve a rich enough suite of feedbacks that they are unlikely to be satisfactorily described by highly simplified or toy models. Our purpose is not to specify a checklist of evaluation criteria but to introduce characteristics of the earth system that may present useful opportunities for model testing and, of course, improvement.

Management of the General Process of Parenteral Nutrition Using mHealth Technologies: Evaluation and Validation Study.

PubMed

Cervera Peris, Mercedes; Alonso Rorís, Víctor Manuel; Santos Gago, Juan Manuel; Álvarez Sabucedo, Luis; Wanden-Berghe, Carmina; Sanz-Valero, Javier

2018-04-03

Any system applied to the control of parenteral nutrition (PN) ought to prove that the process meets the established requirements and include a repository of records to allow evaluation of the information about PN processes at any time. The goal of the research was to evaluate the mobile health (mHealth) app and validate its effectiveness in monitoring the management of the PN process. We studied the evaluation and validation of the general process of PN using an mHealth app. The units of analysis were the PN bags prepared and administered at the Son Espases University Hospital, Palma, Spain, from June 1 to September 6, 2016. For the evaluation of the app, we used the Poststudy System Usability Questionnaire and subsequent analysis with the Cronbach alpha coefficient. Validation was performed by checking the compliance of control for all operations on each of the stages (validation and transcription of the prescription, preparation, conservation, and administration) and by monitoring the operative control points and critical control points. The results obtained from 387 bags were analyzed, with 30 interruptions of administration. The fulfillment of stages was 100%, including noncritical nonconformities in the storage control. The average deviation in the weight of the bags was less than 5%, and the infusion time did not present deviations greater than 1 hour. The developed app successfully passed the evaluation and validation tests and was implemented to perform the monitoring procedures for the overall PN process. A new mobile solution to manage the quality and traceability of sensitive medicines such as blood-derivative drugs and hazardous drugs derived from this project is currently being deployed. ©Mercedes Cervera Peris, Víctor Manuel Alonso Rorís, Juan Manuel Santos Gago, Luis Álvarez Sabucedo, Carmina Wanden-Berghe, Javier Sanz-Valero. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 03.04.2018.

[Supply services at health facilities: measuring performance].

PubMed

Dacosta Claro, I

2001-01-01

Performance measurement, in their different meanings--either balance scorecard or outputs measurement--have become an essential tool in today's organizations (World-Class organizations) to improve service quality and reduce costs. This paper presents a performance measurement system for the hospital supply chain. The system is organized in different levels and groups of indicators in order to show a hierarchical, coherent and integrated vision of the processes. Thus, supply services performance is measured according to (1) financial aspects, (2) customers satisfaction aspects and (3) internal aspects of the processes performed. Since the informational needs of the managers vary within the administrative structure, the performance measurement system is defined in three hierarchical levels. Firstly, the whole supply chain, with the different interrelation of activities. Secondly, the three main processes of the chain--physical management of products, purchasing and negotiation processes and the local storage units. And finally, the performance measurement of each activity involved. The system and the indicators have been evaluated with the participation of 17 health services of Quebec (Canada), however, and due to the similarities of the operation, could be equally implemented in Spanish hospitals.

[Evaluation of the performance of the logistics management system of malaria control resources in the Littoral Department, Benin, in 2017].

PubMed

Ouro-Koura, Abdou-Rahim; Sopoh, Emmanuel Ghislain; Sossa, Jerôme Charles; Glèlè-Ahanhanzo, Yolaine; Agueh, Victoire; Ouendo, Edgard-Marius; Ouedraogo, Laurent

2018-01-01

This study aimed to evaluate the performance of the logistics management system (LMS) of malaria control (MC) resources in the Littoral Department, Benin, in 2017. In June 2017, we conducted a cross-sectional evaluative study focusing on the structures for the storage and the disposal of MC resources as well as on staff involved in their management. The performance of the the logistics management system was evaluated on the basis of the observed compliance of the components and sub-components of the "Structure", the "Process" and the "Results" with the norms and standards defined by the Ministry of Health. A total of 36 structures were investigated and secondary target was surveyed. It followed that 52,78% of the structures for the storage and the disposal of MC resources met the requirements for resources storage while only 33.33% of MC resources management staff were trained in logistics management. The performance of the logistics management system of MC resources was inadequate (compliance 59,13 % compared to the expected score). The structure, as well as the process were non-compliant with the standards ( 60,20% and 73.22% compared to the expected score respectively), leading to negative results (41.53% compared to the expected score). The most inadequate sub-component was the logistics management information system (LMIS). This study highlights the role of LMS for better performance of MC resources management. Particular attention should be given to this component.

Evaluation of center-cut separations applying simulated moving bed chromatography with 8 zones.

PubMed

Santos da Silva, Francisco Vitor; Seidel-Morgenstern, Andreas

2016-07-22

Different multi-column options to perform continuous chromatographic separations of ternary mixtures have been proposed in order to overcome limitations of batch chromatography. One attractive option is given by simulated moving bed chromatography (SMB) with 8 zones, a process that offers uninterrupted production, and, potentially, improved economy. As in other established ternary separation processes, the separation sequence is crucial for the performance of the process. This problem is addressed here by computing and comparing optimal performances of the two possibilities assuming linear adsorption isotherms. The conclusions are presented in a decision tree which can be used to guide the selection of system configuration and operation. Copyright © 2016 Elsevier B.V. All rights reserved.

[Multifactorial method for assessing the physical work capacity of mice].

PubMed

Dubovik, B V; Bogomazov, S D

1987-01-01

Based on the swimming test according to Kiplinger, in experiments on (CBA X C57BL)F1 mice there were elaborated criteria for animal performance evaluation in the process of repeated swimming of a standard distance thus measuring power, volume of work and rate of the fatigue development in relative units. From the study of effects of sydnocarb, bemethyl and phenazepam on various parameters of physical performance of mice a conclusion was made that the proposed method provides a more informative evaluation of the pharmacological effect on physical performance of animals as compared to the methods based on the record of time of performing the load.

Treatment with a low pH processing aid to reduce campylobacter counts on broiler parts

USDA-ARS?s Scientific Manuscript database

New regulations and performance standards for Campylobacter have been implemented by the USDA - Food Safety and Inspection Service (FSIS). The objective of this study was to evaluate treatment with a low pH processing aid (CMS PoultrypHreshTM), a formulated low pH processing aid, to reduce numbers...

Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

PubMed

Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

2015-11-30

Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluation of telerobotic systems using an instrumented task board

NASA Technical Reports Server (NTRS)

Carroll, John D.; Gierow, Paul A.; Bryan, Thomas C.

1991-01-01

An instrumented task board was developed at NASA Marshall Space Flight Center (MSFC). An overview of the task board design, and current development status is presented. The task board was originally developed to evaluate operator performance using the Protoflight Manipulator Arm (PFMA) at MSFC. The task board evaluates tasks for Orbital Replacement Unit (ORU), fluid connect and transfers, electrical connect/disconnect, bolt running, and other basic tasks. The instrumented task board measures the 3-D forces and torques placed on the board, determines the robot arm's 3-D position relative to the task board using IR optics, and provides the information in real-time. The PFMA joint input signals can also be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to real-time force/torque data presentation. The instrumented task board's most promising use is developing benchmarks for NASA centers for comparison and evaluation of telerobotic performance.

Impact of scalding duration and scalding water temperature on broiler processing wastewater loadings

USDA-ARS?s Scientific Manuscript database

Three experiments were performed to evaluate scalding tank poultry processing wastewater (PPW) loading following the slaughter and scalding of commercially raised broilers: hard vs. soft scalding protocols (experiment 1), scalding immersion time and temperature individually (experiment 2), and the p...

Statistical porcess control in Deep Space Network operation

NASA Technical Reports Server (NTRS)

Hodder, J. A.

2002-01-01

This report describes how the Deep Space Mission System (DSMS) Operations Program Office at the Jet Propulsion Laboratory's (EL) uses Statistical Process Control (SPC) to monitor performance and evaluate initiatives for improving processes on the National Aeronautics and Space Administration's (NASA) Deep Space Network (DSN).

[Concept extraction of graduate research by modified grounded theory approach and creating of rubric oriented to performance evaluation].

PubMed

Yasuhara, Tomohisa; Sone, Tomomichi; Kohno, Takeyuki; Ogita, Kiyokazu

2015-01-01

  A revised core curriculum model for pharmaceutical education, developed on the basis of the principles of outcome-based education, will be introduced in 2015. Inevitably, appropriate assessments of students' academic achievements will be required. Although evaluations of the cognitive domain can be carried out by paper tests, evaluation methods for the attitude domain and problem-solving abilities need to be established. From the viewpoint of quality assurance for graduates, pharmaceutical education reforms have become vital to evaluation as well as learning strategies. To evaluate student academic achievements on problem-solving abilities, authentic assessment is required. Authentic assessment is the evaluation that mimics the context tried in work and life. Specifically, direct evaluation of performances, demonstration or the learners' own work with integrated variety knowledge and skills, is required. To clarify the process of graduate research, we obtained qualitative data through focus group interviews with six teachers and analyzed the data using the modified grounded theory approach. Based on the results, we clarify the performance students should show in graduate research and create a rubric for evaluation of performance in graduate research.

A Verification Method of Inter-Task Cooperation in Embedded Real-time Systems and its Evaluation

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

In software development process of embedded real-time systems, the design of the task cooperation process is very important. The cooperating process of such tasks is specified by task cooperation patterns. Adoption of unsuitable task cooperation patterns has fatal influence on system performance, quality, and extendibility. In order to prevent repetitive work caused by the shortage of task cooperation performance, it is necessary to verify task cooperation patterns in an early software development stage. However, it is very difficult to verify task cooperation patterns in an early software developing stage where task program codes are not completed yet. Therefore, we propose a verification method using task skeleton program codes and a real-time kernel that has a function of recording all events during software execution such as system calls issued by task program codes, external interrupts, and timer interrupt. In order to evaluate the proposed verification method, we applied it to the software development process of a mechatronics control system.

Vapor Phase Catalytic Ammonia Reduction

NASA Technical Reports Server (NTRS)

Flynn, Michael T.; Harper, Lynn D. (Technical Monitor)

1994-01-01

This paper discusses the development of a Vapor Phase Catalytic Ammonia Reduction (VPCAR) teststand and the results of an experimental program designed to evaluate the potential of the technology as a water purification process. In the experimental program the technology is evaluated based upon product water purity, water recovery rate, and power consumption. The experimental work demonstrates that the technology produces high purity product water and attains high water recovery rates at a relatively high specific power consumption. The experimental program was conducted in 3 phases. In phase I an Igepon(TM) soap and water mixture was used to evaluate the performance of an innovative Wiped-Film Rotating-Disk evaporator and associated demister. In phase II a phenol-water solution was used to evaluate the performance of the high temperature catalytic oxidation reactor. In phase III a urine analog was used to evaluate the performance of the combined distillation/oxidation functions of the processor.

Optimization Of PVDF-TrFE Processing Conditions For The Fabrication Of Organic MEMS Resonators

PubMed Central

Ducrot, Pierre-Henri; Dufour, Isabelle; Ayela, Cédric

2016-01-01

This paper reports a systematic optimization of processing conditions of PVDF-TrFE piezoelectric thin films, used as integrated transducers in organic MEMS resonators. Indeed, despite data on electromechanical properties of PVDF found in the literature, optimized processing conditions that lead to these properties remain only partially described. In this work, a rigorous optimization of parameters enabling state-of-the-art piezoelectric properties of PVDF-TrFE thin films has been performed via the evaluation of the actuation performance of MEMS resonators. Conditions such as annealing duration, poling field and poling duration have been optimized and repeatability of the process has been demonstrated. PMID:26792224

Optimization Of PVDF-TrFE Processing Conditions For The Fabrication Of Organic MEMS Resonators.

PubMed

Ducrot, Pierre-Henri; Dufour, Isabelle; Ayela, Cédric

2016-01-21

This paper reports a systematic optimization of processing conditions of PVDF-TrFE piezoelectric thin films, used as integrated transducers in organic MEMS resonators. Indeed, despite data on electromechanical properties of PVDF found in the literature, optimized processing conditions that lead to these properties remain only partially described. In this work, a rigorous optimization of parameters enabling state-of-the-art piezoelectric properties of PVDF-TrFE thin films has been performed via the evaluation of the actuation performance of MEMS resonators. Conditions such as annealing duration, poling field and poling duration have been optimized and repeatability of the process has been demonstrated.

The RISC (Reduced Instruction Set Computer) Architecture and Computer Performance Evaluation.

DTIC Science & Technology

1986-03-01

time where the main emphasis of the evaluation process is put on the software . The model is intended to provide a tool for computer architects to use...program, or 3) Was to be implemented in random logic more effec- tively than the equivalent sequence of software instructions. Both data and address...definition is the IEEE standard 729-1983 stating Computer Architecture as: " The process of defining a collection of hardware and software components and

Evaluation of ERDA-sponsored coal feed system development

NASA Technical Reports Server (NTRS)

Phen, R. L.; Luckow, W. K.; Mattson, L.; Otth, D.; Tsou, P.

1977-01-01

Coal feeders were evaluated based upon criteria such as technical feasibility, performance (i.e. ability to meet process requirements), projected life cycle costs, and projected development cost. An initial set of feeders was selected based on the feeders' cost savings potential compared with baseline lockhopper systems. Additional feeders were considered for selection based on: (1) increasing the probability of successful feeder development; (2) application to specific processes; and (3) technical merit. A coal feeder development program is outlined.

Comparison of performance on process- and product-oriented assessments of fundamental motor skills across childhood.

PubMed

Logan, Samuel W; Barnett, Lisa M; Goodway, Jacqueline D; Stodden, David F

2017-04-01

Process-oriented motor competence (MC) assessments evaluate how a movement is performed. Product-oriented assessments evaluate the outcome of a movement. Determining the concurrent validity of process and product assessments is important to address the predictive utility of motor competence for health. The current study aimed to: (1) compare process and product assessments of the standing long jump, hop and throw across age groups and (2) determine the capacity of process assessments to classify levels of MC. Participants included 170 children classified into three age groups: 4-5, 7-8 and 10-11 years old. Participants' skills were examined concurrently using three process assessments ((Test of Gross Motor Development-2nd edition [TGMD-2]), Get Skilled; Get Active, and developmental sequences) and one product measure (throw speed, jump and hop distance). Results indicate moderate to strong correlations between (1) process assessments across skills and age groups (r range = .37-70) and (2) process and product assessments across skills and age groups (r range = .26-.88). In general, sensitivity to detect advanced skill level is lowest for TGMD-2 and highest for developmental sequences for all three skills. The use of process and product assessments is suggested to comprehensively capture levels of MC in human movement.