Identification of effective exciton-exciton annihilation in squaraine-squaraine copolymers.

PubMed

Hader, Kilian; May, Volkhard; Lambert, Christoph; Engel, Volker

2016-05-11

Ultrafast time-resolved transient absorption spectroscopy is able to monitor the fate of the excited state population in molecular aggregates or polymers. Due to many competing decay processes, the identification of exciton-exciton annihilation (EEA) is difficult. Here, we use a microscopic model to describe exciton annihilation processes in squaraine-squaraine copolymers. Transient absorption time traces measured at different laser powers exhibit an unusual time-dependence. The analysis points towards dynamics taking place on three time-scales. Immediately after laser-excitation a localization of excitons takes place within the femtosecond time-regime. This is followed by exciton-exciton annihilation which is responsible for a fast decay of the exciton population. At later times, excitations being localized on units which are not directly connected remain so that diffusion dominates the dynamics and leads to a slower decay. We thus provide evidence for EEA tracked by time-resolved spectroscopy which has not been reported that clearly before.

Using Graphical Processing Units to Accelerate Orthorectification, Atmospheric Correction and Transformations for Big Data

NASA Astrophysics Data System (ADS)

O'Connor, A. S.; Justice, B.; Harris, A. T.

2013-12-01

Graphics Processing Units (GPUs) are high-performance multiple-core processors capable of very high computational speeds and large data throughput. Modern GPUs are inexpensive and widely available commercially. These are general-purpose parallel processors with support for a variety of programming interfaces, including industry standard languages such as C. GPU implementations of algorithms that are well suited for parallel processing can often achieve speedups of several orders of magnitude over optimized CPU codes. Significant improvements in speeds for imagery orthorectification, atmospheric correction, target detection and image transformations like Independent Components Analsyis (ICA) have been achieved using GPU-based implementations. Additional optimizations, when factored in with GPU processing capabilities, can provide 50x - 100x reduction in the time required to process large imagery. Exelis Visual Information Solutions (VIS) has implemented a CUDA based GPU processing frame work for accelerating ENVI and IDL processes that can best take advantage of parallelization. Testing Exelis VIS has performed shows that orthorectification can take as long as two hours with a WorldView1 35,0000 x 35,000 pixel image. With GPU orthorecification, the same orthorectification process takes three minutes. By speeding up image processing, imagery can successfully be used by first responders, scientists making rapid discoveries with near real time data, and provides an operational component to data centers needing to quickly process and disseminate data.

78 FR 65751 - Integrated Corridor Management Deployment Planning Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Cronin, Team Leader, Research, Research and Innovative Technology Administration (RITA) ITS-Joint Program...:00 p.m. e.t. Registering with Grants.gov is a one-time process; however, processing delays may occur and it can take up to several weeks for first-time registrants to receive confirmation and a user...

Stairs or escalator? Using theories of persuasion and motivation to facilitate healthy decision making.

PubMed

Suri, Gaurav; Sheppes, Gal; Leslie, Sara; Gross, James J

2014-12-01

To encourage an increase in daily activity, researchers have tried a variety of health-related communications, but with mixed results. In the present research-using the stair escalator choice context-we examined predictions derived from the Heuristic Systematic Model (HSM), Self Determination Theory (SDT), and related theories. Specifically, we tested whether (as predicted by HSM) signs that encourage heuristic processing ("Take the Stairs") would have greatest impact when placed at the stair/escalator point of choice (when processing time is limited), whereas signs that encourage systematic processing ("Will You Take the Stairs?") would have greatest impact when placed at some distance from the point of choice (when processing time is less limited). We also tested whether (as predicted by SDT) messages promoting autonomy would be more likely to result in sustained motivated behavior (i.e., stair taking at subsequent uncued choice points) than messages that use commands. A series of studies involving more than 9,000 pedestrians provided support for these predictions. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Help Others and Yourself Eventually: Exploring the Relationship between Help-Giving and Employee Creativity under the Model of Perspective Taking.

PubMed

Li, Si; Liao, Shudi

2017-01-01

Although a plethora of studies have examined the antecedents of creativity, empirical studies exploring the role of individual behaviors in relation to creativity are relatively scarce. Drawing on the model of perspective taking, this study examines the relationship between help-giving during creative problem solving process and employee creativity. Specifically, we test perspective taking as an explanatory mechanism and propose organization-based self-esteem as the moderator. In a sample collected from a field survey of 247 supervisor-subordinate dyads from 2 large organizations in China at 3 time points, we find that help-giving during creative problem solving process positively related with perspective taking; perspective taking positively related with employees' creativity; employees' organization-based self-esteem strengthened the link between perspective taking and creativity; besides, there existed a moderated mediation effect. We conclude this paper with discussions on the implications for theory, research, and practice.

A Study on Correlation of Risk-Taking and the Oral Production of English Majors in China

ERIC Educational Resources Information Center

Wang, Yang; Lin, Yuewu

2015-01-01

Risk-taking refers to the tendency to engage in behaviors that have the potential to be harmful or dangerous, yet at the same time provides the opportunity for some kinds of outcome that can be perceived as positive. Ely (1986) and Bang (1999) have mentioned the relationship between risk-taking and oral production in the process of English…

Research on cylinder processes of gasoline homogenous charge compression ignition (HCCI) engine

NASA Astrophysics Data System (ADS)

Cofaru, Corneliu

2017-10-01

This paper is designed to develop a HCCI engine starting from a spark ignition engine platform. The engine test was a single cylinder, four strokes provided with carburetor. The results of experimental research on this version were used as a baseline for the next phase of the work. After that, the engine was modified for a HCCI configuration, the carburetor was replaced by a direct fuel injection system in order to control precisely the fuel mass per cycle taking into account the measured intake air-mass. To ensure that the air - fuel mixture auto ignite, the compression ratio was increased from 9.7 to 11.5. The combustion process in HCCI regime is governed by chemical kinetics of mixture of air-fuel, rein ducted or trapped exhaust gases and fresh charge. To modify the quantities of trapped burnt gases, the exchange gas system was changed from fixed timing to variable valve timing. To analyze the processes taking place in the HCCI engine and synthesizing a control system, a model of the system which takes into account the engine configuration and operational parameters are needed. The cylinder processes were simulated on virtual model. The experimental research works were focused on determining the parameters which control the combustion timing of HCCI engine to obtain the best energetic and ecologic parameters.

Design local exhaust ventilation on sieve machine at PT.Perkebunan Nusantara VIII Ciater using design for assembly (DFA) approach with Boothroyd and Dewhurst method

NASA Astrophysics Data System (ADS)

Khalqihi, K. I.; Rahayu, M.; Rendra, M.

2017-12-01

PT Perkebunan Nusantara VIII Ciater is a company produced black tea orthodox more or less 4 tons every day. At the production section, PT Perkebunan Nusantara VIII will use local exhaust ventilation specially at sortation area on sieve machine. To maintain the quality of the black tea orthodox, all machine must be scheduled for maintenance every once a month and takes time 2 hours in workhours, with additional local exhaust ventilation, it will increase time for maintenance process, if maintenance takes time more than 2 hours it will caused production process delayed. To support maintenance process in PT Perkebunan Nusantara VIII Ciater, designing local exhaust ventilation using design for assembly approach with Boothroyd and Dewhurst method, design for assembly approach is choosen to simplify maintenance process which required assembly process. There are 2 LEV designs for this research. Design 1 with 94 components, assembly time 647.88 seconds and assembly efficiency level 23.62%. Design 2 with 82 components, assembly time 567.84 seconds and assembly efficiency level 24.83%. Design 2 is choosen for this research based on DFA goals, minimum total part that use, optimization assembly time, and assembly efficiency level.

24 CFR 903.17 - What is the process for obtaining public comment on the plans?

Code of Federal Regulations, 2011 CFR

2011-04-01

... hearing is to take place, the PHA must: (1) Make the proposed PHA plan(s), the required attachments and..., and that a public hearing will take place on the plan, and the date, time and location of the hearing...

75 FR 80516 - Notice of Submission of Proposed Information Collection to OMB; Lender Qualifications for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Proposed Information Collection to OMB; Lender Qualifications for Multifamily Accelerated Processing (MAP) AGENCY: Office of the Chief Information Officer, HUD. ACTION: Notice. SUMMARY: The proposed information...-processing plan that will take substantially less processing time than traditional processing. DATES...

Hidden symmetries and equilibrium properties of multiplicative white-noise stochastic processes

NASA Astrophysics Data System (ADS)

González Arenas, Zochil; Barci, Daniel G.

2012-12-01

Multiplicative white-noise stochastic processes continue to attract attention in a wide area of scientific research. The variety of prescriptions available for defining them makes the development of general tools for their characterization difficult. In this work, we study equilibrium properties of Markovian multiplicative white-noise processes. For this, we define the time reversal transformation for such processes, taking into account that the asymptotic stationary probability distribution depends on the prescription. Representing the stochastic process in a functional Grassmann formalism, we avoid the necessity of fixing a particular prescription. In this framework, we analyze equilibrium properties and study hidden symmetries of the process. We show that, using a careful definition of the equilibrium distribution and taking into account the appropriate time reversal transformation, usual equilibrium properties are satisfied for any prescription. Finally, we present a detailed deduction of a covariant supersymmetric formulation of a multiplicative Markovian white-noise process and study some of the constraints that it imposes on correlation functions using Ward-Takahashi identities.

Dual Trajectories of Reactive and Proactive Aggression from Mid-childhood to Early Adolescence: Relations to Sensation Seeking, Risk Taking, and Moral Reasoning.

PubMed

Cui, Lixian; Colasante, Tyler; Malti, Tina; Ribeaud, Denis; Eisner, Manuel P

2016-05-01

We examined the roles of sensation seeking, risk taking, and moral reasoning in the development of reactive and proactive aggression. Data were drawn from a multiethnic, longitudinal study of children from Switzerland (N = 1571; 52 % male; assessed annually over 6 years; 7-years-old at Time 1). At all 6 time points, teachers reported children's reactive and proactive aggression via questionnaire. Children's sensation seeking (at Time 1) and risk taking (at Time 2) were assessed with two interactive computer tasks and their moral reasoning was assessed at Time 2 in response to four hypothetical vignettes depicting moral transgressions. Parallel process Latent Class Growth Analysis (PP-LCGA) identified six dual trajectories of reactive and proactive aggression. Children with either childhood-limited or adolescent-onset aggression showed high sensation seeking. Children with persistent, high levels of both reactive and proactive aggression across time showed high levels of sensation seeking and risk taking, as well as low levels of moral reasoning. Children with only high risk taking were more likely to display moderate levels of aggression across time. These findings highlight the shared and differential roles of sensation seeking, risk taking, and moral reasoning in the dual development of reactive and proactive aggression from mid-childhood to early adolescence. We discuss implications for common and tailored strategies to combat these aggression subtypes.

Uranium as a possible criterion for the hydro-chemical alteration of betafite

NASA Astrophysics Data System (ADS)

Hosseinpour Khanmiri, Mohammad; Yanson, Svetlana Yu.; Fomin, Edward V.; Titov, Anatoly V.; Grebeniuk, Andrey V.; Polekhovsky, Yury S.; Bogdanov, Roman V.

2018-01-01

Hydro-chemical processes significantly alter the original composition of metamict minerals. In the work presented here, an attempt was made to reconstruct the chemical composition of betafite in the earlier stages of its geological history. The time scale is determined by the leaching rate of the isotope 238U, a process that takes its course in line with first-order kinetics, or something close to it. The leaching rate constant of this uranium isotope was assessed. Based on available data in the literature, the hydro-chemical behavior of various atoms in group A of betafite was analyzed. The chemical composition of the mineral was calculated taking into account the total charge of the cations that the betafite had at the time it was formed, or possibly the last time it was completely reformed as a result of diverse endogenic processes.

Uranium as a possible criterion for the hydro-chemical alteration of betafite

NASA Astrophysics Data System (ADS)

Hosseinpour Khanmiri, Mohammad; Yanson, Svetlana Yu.; Fomin, Edward V.; Titov, Anatoly V.; Grebeniuk, Andrey V.; Polekhovsky, Yury S.; Bogdanov, Roman V.

2018-06-01

Hydro-chemical processes significantly alter the original composition of metamict minerals. In the work presented here, an attempt was made to reconstruct the chemical composition of betafite in the earlier stages of its geological history. The time scale is determined by the leaching rate of the isotope 238U, a process that takes its course in line with first-order kinetics, or something close to it. The leaching rate constant of this uranium isotope was assessed. Based on available data in the literature, the hydro-chemical behavior of various atoms in group A of betafite was analyzed. The chemical composition of the mineral was calculated taking into account the total charge of the cations that the betafite had at the time it was formed, or possibly the last time it was completely reformed as a result of diverse endogenic processes.

New on the Job? Here's How to Make the Position Your Own.

ERIC Educational Resources Information Center

Giles, Douglas E.; Giles, Sharon

1991-01-01

Successful superintendents recognize that taking charge is not a one-time event, but a two- or three-year process. Inspired by John J. Gabarro's May 1985 "Harvard Business Review" article, this article identifies five passages (taking hold, immersion, reshaping, consolidation, and refinement) that new superintendents must navigate…

Theory of earthquakes interevent times applied to financial markets

NASA Astrophysics Data System (ADS)

Jagielski, Maciej; Kutner, Ryszard; Sornette, Didier

2017-10-01

We analyze the probability density function (PDF) of waiting times between financial loss exceedances. The empirical PDFs are fitted with the self-excited Hawkes conditional Poisson process with a long power law memory kernel. The Hawkes process is the simplest extension of the Poisson process that takes into account how past events influence the occurrence of future events. By analyzing the empirical data for 15 different financial assets, we show that the formalism of the Hawkes process used for earthquakes can successfully model the PDF of interevent times between successive market losses.

On Real-Time Operating Systems.

DTIC Science & Technology

1987-04-01

1Ri2 193 ONREAL-TIME OPERATING SYS EMS(U MAYLAN UN V COLLG PARK DEPT OF COMPUTER SCIENCE S LEVI ET AL APR 87 CS-TR-1838 NOSO14-87-K-9124 UNCLASSIFIED...and processes. In each instance the abstraction takes the form of some non- physical resource and benefits both the system and the user. ...The...service, which is important as an inter-process service (for physical synchronization) as well as an internal service for a process. A time service in a

Modern Corneal Eye-Banking Using a Software-Based IT Management Solution.

PubMed

Kern, C; Kortuem, K; Wertheimer, C; Nilmayer, O; Dirisamer, M; Priglinger, S; Mayer, W J

2018-01-01

Increasing government legislation and regulations in manufacturing have led to additional documentation regarding the pharmaceutical product requirements of corneal grafts in the European Union. The aim of this project was to develop a software within a hospital information system (HIS) to support the documentation process, to improve the management of the patient waiting list and to increase informational flow between the clinic and eye bank. After an analysis of the current documentation process, a new workflow and software were implemented in our electronic health record (EHR) system. The software takes over most of the documentation and reduces the time required for record keeping. It guarantees real-time tracing of all steps during human corneal tissue processing from the start of production until allocation during surgery and includes follow-up within the HIS. Moreover, listing of the patient for surgery as well as waiting list management takes place in the same system. The new software for corneal eye banking supports the whole process chain by taking over both most of the required documentation and the management of the transplant waiting list. It may provide a standardized IT-based solution for German eye banks working within the same HIS.

Resident Autonomy in the Operating Room: How Faculty Assess Real-time Entrustability.

PubMed

Chen, Xiaodong Phoenix; Sullivan, Amy M; Smink, Douglas S; Alseidi, Adnan; Bengtson, Joan M; Kwakye, Gifty; Dalrymple, John L

2018-02-20

This study aimed to identify the empirical processes and evidence that expert surgical teachers use to determine whether to take over certain steps or entrust the resident with autonomy to proceed during an operation. Assessing real-time entrustability is inherent in attending surgeons' determinations of residents' intraoperative autonomy in the operating room. To promote residents' autonomy, it is necessary to understand how attending surgeons evaluate residents' performance and support opportunities for independent practice based on the assessment of their entrustability. We conducted qualitative semi-structured interviews with 43 expert surgical teachers from 21 institutions across 4 regions of the United States, using purposeful and snowball sampling. Participants represented a range of program types, program size, and clinical expertise. We applied the Framework Method of content analysis to iteratively analyze interview transcripts and identify emergent themes. We identified a 3-phase process used by most expert surgical teachers in determining whether to take over intraoperatively or entrust the resident to proceed, including 1) monitoring performance and "red flags," 2) assessing entrustability, and 3) granting autonomy. Factors associated with individual surgeons (eg, level of comfort, experience, leadership role) and the context (eg, patient safety, case, and time) influenced expert surgical teachers' determinations of entrustability and residents' final autonomy. Expert surgical teachers' 3-phase process of decisions on take-over provides a potential framework that may help surgeons identify appropriate opportunities to develop residents' progressive autonomy by engaging the resident in the determination of entrustability before deciding to take over.

Help Others and Yourself Eventually: Exploring the Relationship between Help-Giving and Employee Creativity under the Model of Perspective Taking

PubMed Central

Li, Si; Liao, Shudi

2017-01-01

Although a plethora of studies have examined the antecedents of creativity, empirical studies exploring the role of individual behaviors in relation to creativity are relatively scarce. Drawing on the model of perspective taking, this study examines the relationship between help-giving during creative problem solving process and employee creativity. Specifically, we test perspective taking as an explanatory mechanism and propose organization-based self-esteem as the moderator. In a sample collected from a field survey of 247 supervisor-subordinate dyads from 2 large organizations in China at 3 time points, we find that help-giving during creative problem solving process positively related with perspective taking; perspective taking positively related with employees’ creativity; employees’ organization-based self-esteem strengthened the link between perspective taking and creativity; besides, there existed a moderated mediation effect. We conclude this paper with discussions on the implications for theory, research, and practice. PMID:28690566

Inbound freight: an untapped resource for saving money.

PubMed

Kuehn, Kurt

2007-12-01

With all the responsibilities placed on materials managers, it is not surprising that some processes such as shipping are overlooked when it comes to cutting costs. But by taking a closer look at inbound freight costs, materials managers might discover an untapped resource for saving thousands, and in some cases millions, of dollars. Finding out how costs vary among vendors for shipping the same type of item can eliminate unnecessary freight charges. Initially, the process takes time, but the bottom line will be better for it.

Determinants of land take at the regional scale: a study concerning Sardinia (Italy)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zoppi, Corrado, E-mail: zoppi@unica.it; Lai, Sabrina, E-mail: sabrinalai@unica.it

In its “Roadmap to a Resource Efficient Europe” (Communication COM(2011) 571 of 20 September 2011), the European Commission (EC) established an ambitious goal for the European Union (EU), that of achieving no land take by 2050; towards this aim, a key milestone for the year 2020 was set, by stating that European policies in the programming period 2014–2020 ought to consider both their direct and their indirect impacts on land use in the EU. Within this framework, this paper builds upon the findings of a previous paper (Zoppi and Lai, 2014), in which we estimated the magnitude of land takemore » over a short period of time (2003–2008) in Sardinia, an Italian NUTS2 region, and we assessed whether and how land take is related to a set of variables that are regarded as important determinants in the literature, such as parcel size, accessibility, and proximity to main cities and towns, to the coastline, or to protected areas. In this paper we study the land-taking process taking Sardinia as a case study, in two larger time periods, 1960–1990 and 1990–2008. We assess if, and to what extent, these factors reveal similar, or different, effects in the two periods, and try to identify consistencies concerning the determinants of land take. - Highlights: • Population density and parcel size significantly affect the magnitude of land take. • The presence of nature conservation areas hinders land taking processes. • Extensive urbanization might effectively preserve non-artificial land. • Balanced accessibility of settlements and nature conservation regional policies can effectively contrast land take. • Size of non-artificial land parcels that become artificial is negatively and significantly connected to land take.« less

Risk-taking and decision-making in youth: relationships to addiction vulnerability.

PubMed

Balogh, Kornelia N; Mayes, Linda C; Potenza, Marc N

2013-03-01

Decision-making and risk-taking behavior undergo developmental changes during adolescence. Disadvantageous decision-making and increased risk-taking may lead to problematic behaviors such as substance use and abuse, pathological gambling and excessive internet use. Based on MEDLINE searches, this article reviews the literature on decision-making and risk-taking and their relationship to addiction vulnerability in youth. Decision-making and risk-taking behaviors involve brain areas that undergoing developmental changes during puberty and young adulthood. Individual differences and peer pressure also relate importantly to decision-making and risk-taking. Brain-based changes in emotional, motivational and cognitive processing may underlie risk-taking and decision-making propensities in adolescence, making this period a time of heightened vulnerability for engagement in additive behaviors.

Deployment Threats to Rapid Deployment Forces

DTIC Science & Technology

1982-12-01

may take two weeks. The same process occurs in people who move rapidly from a time zone in which they are well-adapted to a time zone that is hours...travel is a complex process involving change and transition. Some of these changes are small and apparently insignificant, others loom large in their... process of depart- ing is not innocuous. It must be viewed as a personsal transition that may have a significant potential for stress production

Does incentivising pill-taking 'crowd out' risk-information processing? Evidence from a web-based experiment.

PubMed

Mantzari, Eleni; Vogt, Florian; Marteau, Theresa M

2014-04-01

The use of financial incentives for changing health-related behaviours raises concerns regarding their potential to undermine the processing of risks associated with incentivised behaviours. Uncertainty remains about the validity of such concerns. This web-based experiment assessed the impact of financial incentives on i) willingness to take a pill with side-effects; ii) the time spent viewing risk-information and iii) risk-information processing, assessed by perceived-risk of taking the pill and knowledge of its side-effects. It further assesses whether effects are moderated by limiting cognitive capacity. Two-hundred and seventy-five UK-based university staff and students were recruited online under the pretext of being screened for a fictitious drug-trial. Participants were randomised to the offer of different compensation levels for taking a fictitious pill (£0; £25; £1000) and the presence or absence of a cognitive load task (presentation of five digits for later recall). Willingness to take the pill increased with the offer of £1000 (84% vs. 67%; OR 3.66, CI 95% 1.27-10.6), but not with the offer of £25 (79% vs. 67%; OR 1.68, CI 95% 0.71-4.01). Risk-information processing was unaffected by the offer of incentives. The time spent viewing the risk-information was affected by the offer of incentives, an effect moderated by cognitive load: Without load, time increased with the value of incentives (£1000: M = 304.4sec vs. £0: M = 37.8sec, p < 0.001; £25: M = 66.6sec vs. £0: M = 37.8sec, p < 0.001). Under load, time decreased with the offer of incentives (£1000: M = 48.9sec vs. £0: M = 132.7sec, p < 0.001; £25: M = 60.9sec vs. £0: M = 132.7sec, p < 0.001), but did not differ between the two incentivised groups (p = 1.00). This study finds no evidence to suggest incentives "crowd out" risk-information processing. On the contrary, incentives appear to signal risk, an effect, however, which disappears under cognitive load. Although these findings require replication, they highlight the need to maximise cognitive capacity when presenting information about incentivised health-related behaviours. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Process of Note Taking: Implications for Students with Mild Disabilities

ERIC Educational Resources Information Center

Boyle, Joseph R.

2007-01-01

Students with mild disabilities have a difficult time recording notes from lectures. Accurate note taking is important because it helps students understand the content from lectures and notes serve as a document for later review. In this article, the author describes what teachers can do before, during, and after the lecture to help students…

Learning process mapping heuristics under stochastic sampling overheads

NASA Technical Reports Server (NTRS)

Ieumwananonthachai, Arthur; Wah, Benjamin W.

1991-01-01

A statistical method was developed previously for improving process mapping heuristics. The method systematically explores the space of possible heuristics under a specified time constraint. Its goal is to get the best possible heuristics while trading between the solution quality of the process mapping heuristics and their execution time. The statistical selection method is extended to take into consideration the variations in the amount of time used to evaluate heuristics on a problem instance. The improvement in performance is presented using the more realistic assumption along with some methods that alleviate the additional complexity.

45 CFR 5.35 - Time limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Time limits. 5.35 Section 5.35 Public Welfare... Denial of Records § 5.35 Time limits. (a) General. FOIA sets certain time limits for us to decide whether... time limits, but if it appears that processing your request may take longer than we would wish, we will...

45 CFR 5.35 - Time limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Time limits. 5.35 Section 5.35 Public Welfare... Denial of Records § 5.35 Time limits. (a) General. FOIA sets certain time limits for us to decide whether... time limits, but if it appears that processing your request may take longer than we would wish, we will...

45 CFR 5.35 - Time limits.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Time limits. 5.35 Section 5.35 Public Welfare... Denial of Records § 5.35 Time limits. (a) General. FOIA sets certain time limits for us to decide whether... time limits, but if it appears that processing your request may take longer than we would wish, we will...

45 CFR 5.35 - Time limits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Time limits. 5.35 Section 5.35 Public Welfare... Denial of Records § 5.35 Time limits. (a) General. FOIA sets certain time limits for us to decide whether... time limits, but if it appears that processing your request may take longer than we would wish, we will...

45 CFR 5.35 - Time limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Time limits. 5.35 Section 5.35 Public Welfare... Denial of Records § 5.35 Time limits. (a) General. FOIA sets certain time limits for us to decide whether... time limits, but if it appears that processing your request may take longer than we would wish, we will...

Links between parental depression and longitudinal changes in youths’ neural sensitivity to rewards

PubMed Central

Fuligni, Andrew J.; Galván, Adriana; Lieberman, Matthew D.; Telzer, Eva H.

2016-01-01

Parental depression is a significant risk factor for adolescents’ engagement in risk taking. Yet the neural processes that mediate the link between parental depression and adolescents’ functioning remain unknown. Using a longitudinal functional magnetic resonance imaging design, we investigated how parental depression is associated with changes in adolescents’ neural reactivity to rewards during a risk-taking task, and how such changes in neural reactivity are associated with changes in risk-taking behavior. Greater parental depressive symptoms were associated with increases in their adolescent child’s risk taking and self-reported externalizing behavior over time. At the neural level, adolescents of parents with greater depressive symptoms showed longitudinal increases in the ventral striatum and dorsolateral prefrontal cortex to rewards during risk taking. Longitudinal increases in adolescents’ ventral striatum activation mediates the link between greater parental depression and increases in adolescents’ risk taking and externalizing behavior. These findings provide novel evidence that parental depression may contribute to changes in adolescents’ neural reactivity to rewards over time, which is associated with greater increases in their risk taking and externalizing behavior. PMID:27013103

Measuring Student Knowledge of Landscapes and Their Formation Timespans

ERIC Educational Resources Information Center

Jolley, Alison; Jones, Francis; Harris, Sara

2013-01-01

Geologic time is a crucial component of any geoscientist's training. Essential knowledge of geologic time includes rates of geologic processes and the associated time it takes for geologic features to form, yet measuring conceptual thinking abilities in these domains is challenging. We describe development and initial application of the Landscape…

Mean first-passage times of non-Markovian random walkers in confinement.

PubMed

Guérin, T; Levernier, N; Bénichou, O; Voituriez, R

2016-06-16

The first-passage time, defined as the time a random walker takes to reach a target point in a confining domain, is a key quantity in the theory of stochastic processes. Its importance comes from its crucial role in quantifying the efficiency of processes as varied as diffusion-limited reactions, target search processes or the spread of diseases. Most methods of determining the properties of first-passage time in confined domains have been limited to Markovian (memoryless) processes. However, as soon as the random walker interacts with its environment, memory effects cannot be neglected: that is, the future motion of the random walker does not depend only on its current position, but also on its past trajectory. Examples of non-Markovian dynamics include single-file diffusion in narrow channels, or the motion of a tracer particle either attached to a polymeric chain or diffusing in simple or complex fluids such as nematics, dense soft colloids or viscoelastic solutions. Here we introduce an analytical approach to calculate, in the limit of a large confining volume, the mean first-passage time of a Gaussian non-Markovian random walker to a target. The non-Markovian features of the dynamics are encompassed by determining the statistical properties of the fictitious trajectory that the random walker would follow after the first-passage event takes place, which are shown to govern the first-passage time kinetics. This analysis is applicable to a broad range of stochastic processes, which may be correlated at long times. Our theoretical predictions are confirmed by numerical simulations for several examples of non-Markovian processes, including the case of fractional Brownian motion in one and higher dimensions. These results reveal, on the basis of Gaussian processes, the importance of memory effects in first-passage statistics of non-Markovian random walkers in confinement.

Mean first-passage times of non-Markovian random walkers in confinement

NASA Astrophysics Data System (ADS)

Guérin, T.; Levernier, N.; Bénichou, O.; Voituriez, R.

2016-06-01

The first-passage time, defined as the time a random walker takes to reach a target point in a confining domain, is a key quantity in the theory of stochastic processes. Its importance comes from its crucial role in quantifying the efficiency of processes as varied as diffusion-limited reactions, target search processes or the spread of diseases. Most methods of determining the properties of first-passage time in confined domains have been limited to Markovian (memoryless) processes. However, as soon as the random walker interacts with its environment, memory effects cannot be neglected: that is, the future motion of the random walker does not depend only on its current position, but also on its past trajectory. Examples of non-Markovian dynamics include single-file diffusion in narrow channels, or the motion of a tracer particle either attached to a polymeric chain or diffusing in simple or complex fluids such as nematics, dense soft colloids or viscoelastic solutions. Here we introduce an analytical approach to calculate, in the limit of a large confining volume, the mean first-passage time of a Gaussian non-Markovian random walker to a target. The non-Markovian features of the dynamics are encompassed by determining the statistical properties of the fictitious trajectory that the random walker would follow after the first-passage event takes place, which are shown to govern the first-passage time kinetics. This analysis is applicable to a broad range of stochastic processes, which may be correlated at long times. Our theoretical predictions are confirmed by numerical simulations for several examples of non-Markovian processes, including the case of fractional Brownian motion in one and higher dimensions. These results reveal, on the basis of Gaussian processes, the importance of memory effects in first-passage statistics of non-Markovian random walkers in confinement.

Risk-taking and decision-making in youth: relationships to addiction vulnerability

PubMed Central

Balogh, Kornelia N.; Mayes, Linda C.; Potenza, Marc N.

2013-01-01

Background Decision-making and risk-taking behavior undergo developmental changes during adolescence. Disadvantageous decision-making and increased risk-taking may lead to problematic behaviors such as substance use and abuse, pathological gambling and excessive internet use. Methods Based on MEDLINE searches, this article reviews the literature on decision-making and risk-taking and their relationship to addiction vulnerability in youth. Results Decision-making and risk-taking behaviors involve brain areas that undergoing developmental changes during puberty and young adulthood. Individual differences and peer pressure also relate importantly to decision-making and risk-taking. Conclusions Brain-based changes in emotional, motivational and cognitive processing may underlie risk-taking and decision-making propensities in adolescence, making this period a time of heightened vulnerability for engagement in additive behaviors. PMID:24294500

A Structured approach to incidental take decision making

USGS Publications Warehouse

McGowan, Conor P.

2013-01-01

Decision making related to incidental take of endangered species under U.S. law lends itself well to a structured decision making approach. Incidental take is the permitted killing, harming, or harassing of a protected species under the law as long as that harm is incidental to an otherwise lawful activity and does not “reduce appreciably the probability of survival and recovery in the wild.” There has been inconsistency in the process used for determining incidental take allowances across species and across time for the same species, and structured decision making has been proposed to improve decision making. I use an example decision analysis to demonstrate the process and its applicability to incidental take decisions, even under significant demographic uncertainty and multiple, competing objectives. I define the example problem, present an objectives statement and a value function, use a simulation model to assess the consequences of a set of management actions, and evaluate the tradeoffs among the different actions. The approach results in transparent and repeatable decisions.

Improvements of the ALICE HLT data transport framework for LHC Run 2

NASA Astrophysics Data System (ADS)

Rohr, David; Krzwicki, Mikolaj; Engel, Heiko; Lehrbach, Johannes; Lindenstruth, Volker; ALICE Collaboration

2017-10-01

The ALICE HLT uses a data transport framework based on the publisher- subscriber message principle, which transparently handles the communication between processing components over the network and between processing components on the same node via shared memory with a zero copy approach. We present an analysis of the performance in terms of maximum achievable data rates and event rates as well as processing capabilities during Run 1 and Run 2. Based on this analysis, we present new optimizations we have developed for ALICE in Run 2. These include support for asynchronous transport via Zero-MQ which enables loops in the reconstruction chain graph and which is used to ship QA histograms to DQM. We have added asynchronous processing capabilities in order to support long-running tasks besides the event-synchronous reconstruction tasks in normal HLT operation. These asynchronous components run in an isolated process such that the HLT as a whole is resilient even to fatal errors in these asynchronous components. In this way, we can ensure that new developments cannot break data taking. On top of that, we have tuned the processing chain to cope with the higher event and data rates expected from the new TPC readout electronics (RCU2) and we have improved the configuration procedure and the startup time in order to increase the time where ALICE can take physics data. We analyze the maximum achievable data processing rates taking into account processing capabilities of CPUs and GPUs, buffer sizes, network bandwidth, the incoming links from the detectors, and the outgoing links to data acquisition.

Further characterization of the time transfer capabilities of precise point positioning (PPP): the Sliding Batch Procedure.

PubMed

Guyennon, Nicolas; Cerretto, Giancarlo; Tavella, Patrizia; Lahaye, François

2009-08-01

In recent years, many national timing laboratories have installed geodetic Global Positioning System receivers together with their traditional GPS/GLONASS Common View receivers and Two Way Satellite Time and Frequency Transfer equipment. Many of these geodetic receivers operate continuously within the International GNSS Service (IGS), and their data are regularly processed by IGS Analysis Centers. From its global network of over 350 stations and its Analysis Centers, the IGS generates precise combined GPS ephemeredes and station and satellite clock time series referred to the IGS Time Scale. A processing method called Precise Point Positioning (PPP) is in use in the geodetic community allowing precise recovery of GPS antenna position, clock phase, and atmospheric delays by taking advantage of these IGS precise products. Previous assessments, carried out at Istituto Nazionale di Ricerca Metrologica (INRiM; formerly IEN) with a PPP implementation developed at Natural Resources Canada (NRCan), showed PPP clock solutions have better stability over short/medium term than GPS CV and GPS P3 methods and significantly reduce the day-boundary discontinuities when used in multi-day continuous processing, allowing time-limited, campaign-style time-transfer experiments. This paper reports on follow-on work performed at INRiM and NRCan to further characterize and develop the PPP method for time transfer applications, using data from some of the National Metrology Institutes. We develop a processing procedure that takes advantage of the improved stability of the phase-connected multi-day PPP solutions while allowing the generation of continuous clock time series, more applicable to continuous operation/monitoring of timing equipment.

32 CFR 507.18 - Processing complaints of alleged breach of policies.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (4) Manufacturers may be suspended for failure to return a loaned tool without referral to a hearing... tools are overdue and suspension will take effect if not returned within the specified time. (d..., time, or place of the hearing for purposes of having reasonable time in which to prepare the case. (iv...

Decision making and sequential sampling from memory

PubMed Central

Shadlen, Michael N.; Shohamy, Daphna

2016-01-01

Decisions take time, and as a rule more difficult decisions take more time. But this only raises the question of what consumes the time. For decisions informed by a sequence of samples of evidence, the answer is straightforward: more samples are available with more time. Indeed the speed and accuracy of such decisions are explained by the accumulation of evidence to a threshold or bound. However, the same framework seems to apply to decisions that are not obviously informed by sequences of evidence samples. Here we proffer the hypothesis that the sequential character of such tasks involves retrieval of evidence from memory. We explore this hypothesis by focusing on value-based decisions and argue that mnemonic processes can account for regularities in choice and decision time. We speculate on the neural mechanisms that link sampling of evidence from memory to circuits that represent the accumulated evidence bearing on a choice. We propose that memory processes may contribute to a wider class of decisions that conform to the regularities of choice-reaction time predicted by the sequential sampling framework. PMID:27253447

Learning during Processing: Word Learning Doesn't Wait for Word Recognition to Finish

ERIC Educational Resources Information Center

Apfelbaum, Keith S.; McMurray, Bob

2017-01-01

Previous research on associative learning has uncovered detailed aspects of the process, including what types of things are learned, how they are learned, and where in the brain such learning occurs. However, perceptual processes, such as stimulus recognition and identification, take time to unfold. Previous studies of learning have not addressed…

Advantages of Parallel Processing and the Effects of Communications Time

NASA Technical Reports Server (NTRS)

Eddy, Wesley M.; Allman, Mark

2000-01-01

Many computing tasks involve heavy mathematical calculations, or analyzing large amounts of data. These operations can take a long time to complete using only one computer. Networks such as the Internet provide many computers with the ability to communicate with each other. Parallel or distributed computing takes advantage of these networked computers by arranging them to work together on a problem, thereby reducing the time needed to obtain the solution. The drawback to using a network of computers to solve a problem is the time wasted in communicating between the various hosts. The application of distributed computing techniques to a space environment or to use over a satellite network would therefore be limited by the amount of time needed to send data across the network, which would typically take much longer than on a terrestrial network. This experiment shows how much faster a large job can be performed by adding more computers to the task, what role communications time plays in the total execution time, and the impact a long-delay network has on a distributed computing system.

Microwave Processing of Crowns from Winter Cereals for Light Microscopy.

USDA-ARS?s Scientific Manuscript database

Microwave processing of tissue considerably shortens the time it takes to prepare samples for light and electron microscopy. However, plant tissues from different species and different regions of the plant respond differently making it impossible to use a single protocol for all plant tissue. The ...

[Optimization of process of icraiin be hydrolyzed to Baohuoside I by cellulase based on Plackett-Burman design combined with CCD response surface methodology].

PubMed

Song, Chuan-xia; Chen, Hong-mei; Dai, Yu; Kang, Min; Hu, Jia; Deng, Yun

2014-11-01

To optimize the process of Icraiin be hydrolyzed to Baohuoside I by cellulase by Plackett-Burman design combined with Central Composite Design (CCD) response surface methodology. To select the main influencing factors by Plackett-Burman design, using CCD response surface methodology to optimize the process of Icraiin be hydrolyzed to Baohuoside I by cellulase. Taking substrate concentration, the pH of buffer and reaction time as independent variables, with conversion rate of icariin as dependent variable,using regression fitting of completely quadratic response surface between independent variable and dependent variable,the optimum process of Icraiin be hydrolyzed to Baohuoside I by cellulase was intuitively analyzed by 3D surface chart, and taking verification tests and predictive analysis. The best enzymatic hydrolytic process was as following: substrate concentration 8. 23 mg/mL, pH 5. 12 of buffer,reaction time 35. 34 h. The optimum process of Icraiin be hydrolyzed to Baohuoside I by cellulase is determined by Plackett-Burman design combined with CCD response surface methodology. The optimized enzymatic hydrolytic process is simple, convenient, accurate, reproducible and predictable.

Does a Computer Have an Arrow of Time?

NASA Astrophysics Data System (ADS)

Maroney, Owen J. E.

2010-02-01

Schulman (Entropy 7(4):221-233, 2005) has argued that Boltzmann’s intuition, that the psychological arrow of time is necessarily aligned with the thermodynamic arrow, is correct. Schulman gives an explicit physical mechanism for this connection, based on the brain being representable as a computer, together with certain thermodynamic properties of computational processes. Hawking (Physical Origins of Time Asymmetry, Cambridge University Press, Cambridge, 1994) presents similar, if briefer, arguments. The purpose of this paper is to critically examine the support for the link between thermodynamics and an arrow of time for computers. The principal arguments put forward by Schulman and Hawking will be shown to fail. It will be shown that any computational process that can take place in an entropy increasing universe, can equally take place in an entropy decreasing universe. This conclusion does not automatically imply a psychological arrow can run counter to the thermodynamic arrow. Some alternative possible explanations for the alignment of the two arrows will be briefly discussed.

SU-F-T-99: Data Visualization From a Treatment Planning Tracking System for Radiation Oncology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cline, K; Kabat, C; Li, Y

2016-06-15

Purpose: A treatment planning process tracker database with input forms and a TV-viewable display webpage was developed and implemented in our clinic to collect time data points throughout the process. Tracking plan times is important because it directly affects the patient quality of care. Simply, the longer a patient waits after their initial simulation CT for treatment to begin, the more time the cancer has to progress. The tracker helps to drive workflow through the clinic, while the data collected can be used to understand and manage the process to find and eliminate inefficiencies. Methods: The overall process steps trackedmore » are CT-simulation, mark patient, draw normal contours, draw target volumes, create plan, and review/approve plan. Time stamps for task completion were extracted and used to generate a set of clinic metrics, among which include average time for each step in the process split apart by type of treatment, average time to completion for plans started in a given week, and individual overall completion time per plan. Results: Trends have been tracked for fourteen weeks of clinical data (196 plans). On average, drawing normal contours and target volumes is taking 2–5 times as long as creating the plan itself. This is potentially an issue because it could mean the process is taking too long initially, and it could be forcing the planning step to be done in a short amount of time. We also saw from our graphs that there appears to be no clear trend on the average amount of time per plan week-to-week. Conclusion: A tracker of this type has the potential to provide insight into how time is utilized in our clinic. By equipping our dosimetrists, radiation oncologists, and physicists with individualized metric sets, the tracker can help provide visibility and drive workflow. Funded in part by CPRIT (RP140105).« less

Buffering effect of positive parent-child relationships on adolescent risk taking: A longitudinal neuroimaging investigation

PubMed Central

Qu, Yang; Fuligni, Andrew J.; Galvan, Adriana; Telzer, Eva H.

2015-01-01

Adolescence is marked by a steep increase in risk-taking behavior. The serious consequences of such heightened risk taking raise the importance of identifying protective factors. Despite its dynamic change during adolescence, family relationships remain a key source of influence for teenagers. Using a longitudinal fMRI approach, we scanned 23 adolescents twice across a 1.5-year period to examine how changes in parent-child relationships contribute to changes in adolescent risk taking over time via changes in adolescents’ neural reactivity to rewards. Results indicate that although parent-child relationships are not associated with adolescent risk taking concurrently, increases in positive parent-child relationships contribute to declines in adolescent risk taking. This process is mediated by longitudinal decreases in ventral striatum activation to rewards during risk taking. Findings highlight the neural pathways through which improvements in positive parent-child relationships serve to buffer longitudinal increases in adolescent risk taking. PMID:26342184

Modeling operators' emergency response time for chemical processing operations.

PubMed

Murray, Susan L; Harputlu, Emrah; Mentzer, Ray A; Mannan, M Sam

2014-01-01

Operators have a crucial role during emergencies at a variety of facilities such as chemical processing plants. When an abnormality occurs in the production process, the operator often has limited time to either take corrective actions or evacuate before the situation becomes deadly. It is crucial that system designers and safety professionals can estimate the time required for a response before procedures and facilities are designed and operations are initiated. There are existing industrial engineering techniques to establish time standards for tasks performed at a normal working pace. However, it is reasonable to expect the time required to take action in emergency situations will be different than working at a normal production pace. It is possible that in an emergency, operators will act faster compared to a normal pace. It would be useful for system designers to be able to establish a time range for operators' response times for emergency situations. This article develops a modeling approach to estimate the time standard range for operators taking corrective actions or following evacuation procedures in emergency situations. This will aid engineers and managers in establishing time requirements for operators in emergency situations. The methodology used for this study combines a well-established industrial engineering technique for determining time requirements (predetermined time standard system) and adjustment coefficients for emergency situations developed by the authors. Numerous videos of workers performing well-established tasks at a maximum pace were studied. As an example, one of the tasks analyzed was pit crew workers changing tires as quickly as they could during a race. The operations in these videos were decomposed into basic, fundamental motions (such as walking, reaching for a tool, and bending over) by studying the videos frame by frame. A comparison analysis was then performed between the emergency pace and the normal working pace operations to determine performance coefficients. These coefficients represent the decrease in time required for various basic motions in emergency situations and were used to model an emergency response. This approach will make hazardous operations requiring operator response, alarm management, and evacuation processes easier to design and predict. An application of this methodology is included in the article. The time required for an emergency response was roughly a one-third faster than for a normal response time.

Is take-over time all that matters? The impact of visual-cognitive load on driver take-over quality after conditionally automated driving.

PubMed

Zeeb, Kathrin; Buchner, Axel; Schrauf, Michael

2016-07-01

Currently, development of conditionally automated driving systems which control both lateral and longitudinal vehicle guidance is attracting a great deal of attention. The driver no longer needs to constantly monitor the roadway, but must still be able to resume vehicle control if necessary. The relaxed attention requirement might encourage engagement in non-driving related secondary tasks, and the resulting effect on driver take-over is unclear. The aim of this study was to examine how engagement in three different naturalistic secondary tasks (writing an email, reading a news text, watching a video clip) impacted take-over performance. A driving simulator study was conducted and data from a total of 79 participants (mean age 40 years, 35 females) were used to examine response times and take-over quality. Drivers had to resume vehicle control in four different non-critical scenarios while engaging in secondary tasks. A control group did not perform any secondary tasks. There was no influence of the drivers' engagement in secondary tasks on the time required to return their hands to the steering wheel, and there seemed to be only little if any influence on the time the drivers needed to intervene in vehicle control. Take-over quality, however, deteriorated for distracted drivers, with drivers reading a news text and drivers watching a video deviating on average approximately 8-9cm more from the lane center. These findings seem to indicate that establishing motor readiness may be carried out almost reflexively, but cognitive processing of the situation is impaired by driver distraction. This, in turn, appears to determine take-over quality. The present findings emphasize the importance to consider both response times and take-over quality for a comprehensive understanding of factors that influence driver take-over. Furthermore, a training effect in response times was found to be moderated by the drivers' prior experience with driver assistance systems. This shows that besides driver distraction, driver-related factors influencing take-over performance exist. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using Informance to Educate Parents and Demonstrate the Music Learning Process

ERIC Educational Resources Information Center

Nowmos, Christine M.

2010-01-01

Informances, informal and informative presentations of student learning that emphasize the learning process, provide an alternative to traditional concerts or programs, which may take general music classroom time away from activities not geared toward a specific performance. Informances are an excellent means of communicating educational…

Getting in Sync

ERIC Educational Resources Information Center

Finkel, Ed

2017-01-01

Community college presidents and board members come and go. But a major driver of the continued success of two-year colleges is how fruitfully the relationships between CEOs and their boards evolve over time--from the onboarding process when a president first takes the helm to the "outboarding" process that starts with them giving…

Driver compliance to take-over requests with different auditory outputs in conditional automation.

PubMed

Forster, Yannick; Naujoks, Frederik; Neukum, Alexandra; Huestegge, Lynn

2017-12-01

Conditionally automated driving (CAD) systems are expected to improve traffic safety. Whenever the CAD system exceeds its limit of operation, designers of the system need to ensure a safe and timely enough transition from automated to manual mode. An existing visual Human-Machine Interface (HMI) was supplemented by different auditory outputs. The present work compares the effects of different auditory outputs in form of (1) a generic warning tone and (2) additional semantic speech output on driver behavior for the announcement of an upcoming take-over request (TOR). We expect the information carried by means of speech output to lead to faster reactions and better subjective evaluations by the drivers compared to generic auditory output. To test this assumption, N=17 drivers completed two simulator drives, once with a generic warning tone ('Generic') and once with additional speech output ('Speech+generic'), while they were working on a non-driving related task (NDRT; i.e., reading a magazine). Each drive incorporated one transition from automated to manual mode when yellow secondary lanes emerged. Different reaction time measures, relevant for the take-over process, were assessed. Furthermore, drivers evaluated the complete HMI regarding usefulness, ease of use and perceived visual workload just after experiencing the take-over. They gave comparative ratings on usability and acceptance at the end of the experiment. Results revealed that reaction times, reflecting information processing time (i.e., hands on the steering wheel, termination of NDRT), were shorter for 'Speech+generic' compared to 'Generic' while reaction time, reflecting allocation of attention (i.e., first glance ahead), did not show this difference. Subjective ratings were in favor of the system with additional speech output. Copyright © 2017 Elsevier Ltd. All rights reserved.

The parents' ability to take care of their baby as a factor in decisions to withhold or withdraw life-prolonging treatment in two Dutch NICUs.

PubMed

Moratti, Sofia

2010-06-01

In The Netherlands, it is openly acknowledged that the parents' ability to take care of their child plays a role in the decision-making process over administration of life-prolonging treatment to severely defective newborn babies. Unlike other aspects of such decision-making process up until the present time, the 'ability to take care' has not received specific attention in regulation or in empirical research. The present study is based on interviews with neonatologists in two Dutch NICUs concerning their definition of the ability to take care and its relevance in non-treatment decisions. All of the respondents think that the ability to take care consists of more than one factor. Most doctors mention the parents' emotional state, social network and cognitive abilities. Some doctors mention the presence of psychological conditions in the parents, their financial situation and physical condition. A few refer to the parents' experience and age, their chances to have another baby and their cultural background. Most doctors think the ability to take care has a secondary relevance in the decision-making process, while the primary concern is assessing the condition of the child. A substantial minority thinks the ability to take care does not play any role, while one doctor thinks it is a factor of primary importance. The study constitutes an important stepping-stone for future research in The Netherlands and elsewhere.

Emotion and Deliberative Reasoning in Moral Judgment

PubMed Central

Cummins, Denise Dellarosa; Cummins, Robert C.

2012-01-01

According to an influential dual-process model, a moral judgment is the outcome of a rapid, affect-laden process and a slower, deliberative process. If these outputs conflict, decision time is increased in order to resolve the conflict. Violations of deontological principles proscribing the use of personal force to inflict intentional harm are presumed to elicit negative affect which biases judgments early in the decision-making process. This model was tested in three experiments. Moral dilemmas were classified using (a) decision time and consensus as measures of system conflict and (b) the aforementioned deontological criteria. In Experiment 1, decision time was either unlimited or reduced. The dilemmas asked whether it was appropriate to take a morally questionable action to produce a “greater good” outcome. Limiting decision time reduced the proportion of utilitarian (“yes”) decisions, but contrary to the model’s predictions, (a) vignettes that involved more deontological violations logged faster decision times, and (b) violation of deontological principles was not predictive of decisional conflict profiles. Experiment 2 ruled out the possibility that time pressure simply makes people more like to say “no.” Participants made a first decision under time constraints and a second decision under no time constraints. One group was asked whether it was appropriate to take the morally questionable action while a second group was asked whether it was appropriate to refuse to take the action. The results replicated that of Experiment 1 regardless of whether “yes” or “no” constituted a utilitarian decision. In Experiment 3, participants rated the pleasantness of positive visual stimuli prior to making a decision. Contrary to the model’s predictions, the number of deontological decisions increased in the positive affect rating group compared to a group that engaged in a cognitive task or a control group that engaged in neither task. These results are consistent with the view that early moral judgments are influenced by affect. But they are inconsistent with the view that (a) violation of deontological principles are predictive of differences in early, affect-based judgment or that (b) engaging in tasks that are inconsistent with the negative emotional responses elicited by such violations diminishes their impact. PMID:22973255

Thermal stability of the microstructure of silver films

NASA Astrophysics Data System (ADS)

Sursaeva, V. G.; Straumal, A. B.

2017-04-01

The thermal stability of freely suspended silver films 100 nm thick is studied during isothermal annealing at temperatures of 350-600°C for different times. At temperatures of 350-450°C, only grain growth is observed. Above 450°C, along with grain growth, the formation and growth of hillocks and holes take place; in this case, grain boundaries are essential in the processes. A continuous film transforms into a cellular one. At 500°C, the growth processes of both grains and holes have the same incubation period, during which no grain growth, hole formation, and hole growth take place.

The Time Factor: Leveraging Intelligent Agents and Directed Narratives in Online Learning Environments

ERIC Educational Resources Information Center

Jones, Greg; Warren, Scott

2009-01-01

Using video games, virtual simulations, and other digital spaces for learning can be a time-consuming process; aside from technical issues that may absorb class time, students take longer to achieve gains in learning in virtual environments. Greg Jones and Scott Warren describe how intelligent agents, in-game characters that respond to the context…

Melting dynamics of ice in the mesoscopic regime

PubMed Central

Citroni, Margherita; Fanetti, Samuele; Falsini, Naomi; Foggi, Paolo; Bini, Roberto

2017-01-01

How does a crystal melt? How long does it take for melt nuclei to grow? The melting mechanisms have been addressed by several theoretical and experimental works, covering a subnanosecond time window with sample sizes of tens of nanometers and thus suitable to determine the onset of the process but unable to unveil the following dynamics. On the other hand, macroscopic observations of phase transitions, with millisecond or longer time resolution, account for processes occurring at surfaces and time limited by thermal contact with the environment. Here, we fill the gap between these two extremes, investigating the melting of ice in the entire mesoscopic regime. A bulk ice Ih or ice VI sample is homogeneously heated by a picosecond infrared pulse, which delivers all of the energy necessary for complete melting. The evolution of melt/ice interfaces thereafter is monitored by Mie scattering with nanosecond resolution, for all of the time needed for the sample to reequilibrate. The growth of the liquid domains, over distances of micrometers, takes hundreds of nanoseconds, a time orders of magnitude larger than expected from simple H-bond dynamics. PMID:28536197

Individual variation in the neural processes of motor decisions in the stop signal task: the influence of novelty seeking and harm avoidance personality traits.

PubMed

Hu, Jianping; Lee, Dianne; Hu, Sien; Zhang, Sheng; Chao, Herta; Li, Chiang-Shan R

2016-06-01

Personality traits contribute to variation in human behavior, including the propensity to take risk. Extant work targeted risk-taking processes with an explicit manipulation of reward, but it remains unclear whether personality traits influence simple decisions such as speeded versus delayed responses during cognitive control. We explored this issue in an fMRI study of the stop signal task, in which participants varied in response time trial by trial, speeding up and risking a stop error or slowing down to avoid errors. Regional brain activations to speeded versus delayed motor responses (risk-taking) were correlated to novelty seeking (NS), harm avoidance (HA) and reward dependence (RD), with age and gender as covariates, in a whole brain regression. At a corrected threshold, the results showed a positive correlation between NS and risk-taking responses in the dorsomedial prefrontal, bilateral orbitofrontal, and frontopolar cortex, and between HA and risk-taking responses in the parahippocampal gyrus and putamen. No regional activations varied with RD. These findings demonstrate that personality traits influence the neural processes of executive control beyond behavioral tasks that involve explicit monetary reward. The results also speak broadly to the importance of characterizing inter-subject variation in studies of cognition and brain functions.

The Round-Robin Mock Interview: Maximum Learning in Minimum Time

ERIC Educational Resources Information Center

Marks, Melanie; O'Connor, Abigail H.

2006-01-01

Interview skills is critical to a job seeker's success in obtaining employment. However, learning interview skills takes time. This article offers an activity for providing students with interview practice while sacrificing only a single classroom period. The authors begin by reviewing relevant literature. Then, they outline the process of…

77 FR 25547 - Representation-Case Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

...-1067 (this is not a toll-free number), 1-866-315-6572 (TTY/TDD). SUPPLEMENTARY INFORMATION: The Final... discretionary, and frees the Board to take evidence on the appropriate issues and at the appropriate time for... ``latitude'' is to help the Board keep its process timely, efficient, and free of the unnecessary litigation...

No Small Feat! Taking Time for Change.

ERIC Educational Resources Information Center

Solomon, Pearl Gold

This book provides practical information about the complexity of school change, with an emphasis on the role of time and its impact, along with other variables, on the change process. The other interacting variables in school change include vision, history, leadership and power, the use of support and pressure, capacity building, consensual…

Simon Plays Simon Says: The Timing of Turn-Taking in an imitation Game

DTIC Science & Technology

2012-01-01

found in the linguistics literature as well. Some work focuses on the structure of syntax and semantics in language usage [3], and other work...components come from many different approaches. Turn- taking is a highly multimodal process, and prior work gives much in-depth analysis of specific...attractive as an initial domain of investigation for its multimodality , interactive symmetry, and relative simplicity, being isolated from such

Evidence for the role of self-priming in epistemic action: expertise and the effective use of memory.

PubMed

Maglio, Paul P; Wenger, Michael J; Copeland, Angelina M

2008-01-01

Epistemic actions are physical actions people take to simplify internal problem solving rather than to move closer to an external goal. When playing the video game Tetris, for instance, experts routinely rotate falling shapes more than is strictly needed to place the shapes. Maglio and Kirsh [Kirsh, D., & Maglio, P. (1994). On distinguishing epistemic from pragmatic action. Cognitive Science, 18, 513-549; Maglio, P. P. (1995). The computational basis of interactive skill. PhD thesis, University of California, San Diego] proposed that such actions might serve the purpose of priming memory by external means, reducing the need for internal computation (e.g., mental rotation), and resulting in performance improvements that exceed the cost of taking additional actions. The present study tests this priming hypothesis in a set of four experiments. The first three explored precisely the conditions under which priming produces benefits. Results showed that presentation of multiple orientations of a shape led to faster responses than did presentation of a single orientation, and that this effect depended on the interval between preview and test. The fourth explored whether the benefit of seeing shapes in multiple orientations outweighs the cost of taking the extra actions to rotate shapes physically. Benefits were measured using a novel statistical method for mapping reaction-time data onto an estimate of the increase in processing capacity afforded by seeing multiple orientations. Cost was measured using an empirical estimate of time needed to take action in Tetris. Results showed that indeed the increase in internal processing capacity obtained from seeing shapes in multiple orientations outweighed the time to take extra actions.

A framework for software fault tolerance in real-time systems

NASA Technical Reports Server (NTRS)

Anderson, T.; Knight, J. C.

1983-01-01

A classification scheme for errors and a technique for the provision of software fault tolerance in cyclic real-time systems is presented. The technique requires that the process structure of a system be represented by a synchronization graph which is used by an executive as a specification of the relative times at which they will communicate during execution. Communication between concurrent processes is severely limited and may only take place between processes engaged in an exchange. A history of error occurrences is maintained by an error handler. When an error is detected, the error handler classifies it using the error history information and then initiates appropriate recovery action.

Method and apparatus for optical encoding with compressible imaging

NASA Technical Reports Server (NTRS)

Leviton, Douglas B. (Inventor)

2006-01-01

The present invention presents an optical encoder with increased conversion rates. Improvement in the conversion rate is a result of combining changes in the pattern recognition encoder's scale pattern with an image sensor readout technique which takes full advantage of those changes, and lends itself to operation by modern, high-speed, ultra-compact microprocessors and digital signal processors (DSP) or field programmable gate array (FPGA) logic elements which can process encoder scale images at the highest speeds. Through these improvements, all three components of conversion time (reciprocal conversion rate)--namely exposure time, image readout time, and image processing time--are minimized.

A bioinspired collision detection algorithm for VLSI implementation

NASA Astrophysics Data System (ADS)

Cuadri, J.; Linan, G.; Stafford, R.; Keil, M. S.; Roca, E.

2005-06-01

In this paper a bioinspired algorithm for collision detection is proposed, based on previous models of the locust (Locusta migratoria) visual system reported by F.C. Rind and her group, in the University of Newcastle-upon-Tyne. The algorithm is suitable for VLSI implementation in standard CMOS technologies as a system-on-chip for automotive applications. The working principle of the algorithm is to process a video stream that represents the current scenario, and to fire an alarm whenever an object approaches on a collision course. Moreover, it establishes a scale of warning states, from no danger to collision alarm, depending on the activity detected in the current scenario. In the worst case, the minimum time before collision at which the model fires the collision alarm is 40 msec (1 frame before, at 25 frames per second). Since the average time to successfully fire an airbag system is 2 msec, even in the worst case, this algorithm would be very helpful to more efficiently arm the airbag system, or even take some kind of collision avoidance countermeasures. Furthermore, two additional modules have been included: a "Topological Feature Estimator" and an "Attention Focusing Algorithm". The former takes into account the shape of the approaching object to decide whether it is a person, a road line or a car. This helps to take more adequate countermeasures and to filter false alarms. The latter centres the processing power into the most active zones of the input frame, thus saving memory and processing time resources.

Toward Modeling the Learner's Personality Using Educational Games

ERIC Educational Resources Information Center

Essalmi, Fathi; Tlili, Ahmed; Ben Ayed, Leila Jemni; Jemmi, Mohamed

2017-01-01

Learner modeling is a crucial step in the learning personalization process. It allows taking into consideration the learner's profile to make the learning process more efficient. Most studies refer to an explicit method, namely questionnaire, to model learners. Questionnaires are time consuming and may not be motivating for learners. Thus, this…

Young Learners' Response Processes When Taking Computerized Tasks for Speaking Assessment

ERIC Educational Resources Information Center

Lee, Shinhye; Winke, Paula

2018-01-01

We investigated how young language learners process their responses on and perceive a computer-mediated, timed speaking test. Twenty 8-, 9-, and 10-year-old non-native English-speaking children (NNSs) and eight same-aged, native English-speaking children (NSs) completed seven computerized sample TOEFL® Primary™ speaking test tasks. We investigated…

Human face recognition using eigenface in cloud computing environment

NASA Astrophysics Data System (ADS)

Siregar, S. T. M.; Syahputra, M. F.; Rahmat, R. F.

2018-02-01

Doing a face recognition for one single face does not take a long time to process, but if we implement attendance system or security system on companies that have many faces to be recognized, it will take a long time. Cloud computing is a computing service that is done not on a local device, but on an internet connected to a data center infrastructure. The system of cloud computing also provides a scalability solution where cloud computing can increase the resources needed when doing larger data processing. This research is done by applying eigenface while collecting data as training data is also done by using REST concept to provide resource, then server can process the data according to existing stages. After doing research and development of this application, it can be concluded by implementing Eigenface, recognizing face by applying REST concept as endpoint in giving or receiving related information to be used as a resource in doing model formation to do face recognition.

Contributions to optimization of storage and transporting industrial goods

NASA Astrophysics Data System (ADS)

Babanatsas, T.; Babanatis Merce, R. M.; Glăvan, D. O.; Glăvan, A.

2018-01-01

Optimization of storage and transporting industrial goods in a factory either from a constructive, functional, or technological point of view is a determinant parameter in programming the manufacturing process, the performance of the whole process being determined by the correlation realized taking in consideration those two factors (optimization and programming the process). It is imperative to take into consideration each type of production program (range), to restrain as much as possible the area that we are using and to minimize the times of execution, all of these in order to satisfy the client’s needs, to try to classify them in order to be able to define a global software (with general rules) that is expected to fulfil each client’s needs.

The fastest spreader in SIS epidemics on networks

NASA Astrophysics Data System (ADS)

He, Zhidong; Van Mieghem, Piet

2018-05-01

Identifying the fastest spreaders in epidemics on a network helps to ensure an efficient spreading. By ranking the average spreading time for different spreaders, we show that the fastest spreader may change with the effective infection rate of a SIS epidemic process, which means that the time-dependent influence of a node is usually strongly coupled to the dynamic process and the underlying network. With increasing effective infection rate, we illustrate that the fastest spreader changes from the node with the largest degree to the node with the shortest flooding time. (The flooding time is the minimum time needed to reach all other nodes if the process is reduced to a flooding process.) Furthermore, by taking the local topology around the spreader and the average flooding time into account, we propose the spreading efficiency as a metric to quantify the efficiency of a spreader and identify the fastest spreader, which is adaptive to different infection rates in general networks.

The Critical Middle: A Reason for Hope

ERIC Educational Resources Information Center

Maryland State Department of Education, 2008

2008-01-01

The middle grades are a time of change for adolescent learners. Middle schoolers are in the process of refining their social skills and their self-concept. They begin taking responsibility for their education and making decisions about their own learning. They start planning for college and careers, understanding for the first time how their…

Brain Mapping of drug addiction in witdrawal condition based P300 Signals

NASA Astrophysics Data System (ADS)

Turnip, Arjon; Esti Kusumandari, Dwi; Hidayat, Teddy

2018-04-01

Drug abuse for a long time will slowly cause changes in brain structure and performance. These changes tend to occur in the front of the brain which is directly interfere the concentration and the decision-making process. In this study an experiment involving 10 drug users was performed. The process of recording data with EEG system is conducted during craving condition and 1 hour after taking methadone. From brain mapping results obtained that brain activity tend to occur in the upper layer of the brain during craving conditions and tend to be in the midle layer of the brain after one hour of taking methadone.

Augmented Citizen Science for Environmental Monitoring and Education

NASA Astrophysics Data System (ADS)

Albers, B.; de Lange, N.; Xu, S.

2017-09-01

Environmental monitoring and ecological studies detect and visualize changes of the environment over time. Some agencies are committed to document the development of conservation and status of geotopes and geosites, which is time-consuming and cost-intensive. Citizen science and crowd sourcing are modern approaches to collect data and at the same time to raise user awareness for environmental changes. Citizen scientists can take photographs of point of interests (POI) with smartphones and the PAN App, which is presented in this article. The user is navigated to a specific point and is then guided with an augmented reality approach to take a photo in a specific direction. The collected photographs are processed to time-lapse videos to visualize environmental changes. Users and experts in environmental agencies can use this data for long-term documentation.

Reducing Design Cycle Time and Cost Through Process Resequencing

NASA Technical Reports Server (NTRS)

Rogers, James L.

2004-01-01

In today's competitive environment, companies are under enormous pressure to reduce the time and cost of their design cycle. One method for reducing both time and cost is to develop an understanding of the flow of the design processes and the effects of the iterative subcycles that are found in complex design projects. Once these aspects are understood, the design manager can make decisions that take advantage of decomposition, concurrent engineering, and parallel processing techniques to reduce the total time and the total cost of the design cycle. One software tool that can aid in this decision-making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). The DeMAID software minimizes the feedback couplings that create iterative subcycles, groups processes into iterative subcycles, and decomposes the subcycles into a hierarchical structure. The real benefits of producing the best design in the least time and at a minimum cost are obtained from sequencing the processes in the subcycles.

An ERP Study of the Processing of Subject and Object Relative Clauses in Japanese

ERIC Educational Resources Information Center

Ueno, Mieko; Garnsey, Susan M.

2008-01-01

Using reading times and event-related brain potentials (ERPs), we investigated the processing of Japanese subject and object relative clauses (SRs/ORs). Previous research on English relative clauses shows that ORs take longer to read (King & Just, 1991) and elicit anterior negativity between fillers and gaps (King & Kutas, 1995), which is…

Creative Process Mentoring: Teaching the "Making" in Dance-Making

ERIC Educational Resources Information Center

Lavender, Larry

2006-01-01

Within the Western fine arts tradition of concert and theatrical dance, new dances may be created in any number of ways. No matter how dance making begins, however, unless the work is to be improvised afresh each time it is performed, a process of developing, revising, and "setting" the work needs to take place. To move confidently and…

Feasibility of Using Alternate Fuels in the U.S. Antarctic Program: Initial Assessment

DTIC Science & Technology

2017-09-01

Figures 1 Platts’ Jet A fuel prices per gallons from 1990 to 2013. Platts’ pricing is a real time market process for determining the cost of fossil ... fossil fuels. This process takes into account supply, demand, and current events. Since 1909, Platts has been reporting these real time prices and...refinery to upload NSF’s fuel to the day it arrives at a destination where it will per- form work for a different customer). Over the past decade, day

Licensing of future mobile satellite systems

NASA Technical Reports Server (NTRS)

Lepkowski, Ronald J.

1990-01-01

The regulatory process for licensing mobile satellite systems is complex and can require many years to complete. This process involves frequency allocations, national licensing, and frequency coordination. The regulatory process that resulted in the establishment of the radiodetermination satellite service (RDSS) between 1983 and 1987 is described. In contrast, each of these steps in the licensing of the mobile satellite service (MSS) is taking a significantly longer period of time to complete.

Using the Program Sustainability Assessment Tool to Assess and Plan for Sustainability

PubMed Central

Mainor, Avia; Moreland-Russell, Sarah; Maier, Ryan C.; Brossart, Laura; Luke, Douglas A.

2014-01-01

Implementing and growing a public health program that benefits society takes considerable time and effort. To ensure that positive outcomes are maintained over time, program managers and stakeholders should plan and implement activities to build sustainability capacity within their programs. We describe a 3-part sustainability planning process that programs can follow to build their sustainability capacity. First, program staff and stakeholders take the Program Sustainability Assessment Tool to measure their program’s sustainability across 8 domains. Next, managers and stakeholders use results from the assessment to inform and prioritize sustainability action planning. Lastly, staff members implement the plan and keep track of progress toward their sustainability goals. Through this process, staff can more holistically address the internal and external challenges and pressures associated with sustaining a program. We include a case example of a chronic disease program that completed the Program Sustainability Assessment Tool and engaged in program sustainability planning. PMID:24456644

Scheduling of flow shop problems on 3 machines in fuzzy environment with double transport facility

NASA Astrophysics Data System (ADS)

Sathish, Shakeela; Ganesan, K.

2016-06-01

Flow shop scheduling is a decision making problem in production and manufacturing field which has a significant impact on the performance of an organization. When the machines on which jobs are to be processed are placed at different places, the transportation time plays a significant role in production. Further two different transport agents where 1st takes the job from 1st machine to 2nd machine and then returns back to the first machine and the 2nd takes the job from 2nd machine to 3rd machine and then returns back to the 2nd machine are also considered. We propose a method to minimize the total make span; without converting the fuzzy processing time to classical numbers by using a new type of fuzzy arithmetic and a fuzzy ranking method. A numerical example is provided to explain the proposed method.

Remote Sensing: A valuable tool in the Forest Service decision making process. [in Utah

NASA Technical Reports Server (NTRS)

Stanton, F. L.

1975-01-01

Forest Service studies for integrating remotely sensed data into existing information systems highlight a need to: (1) re-examine present methods of collecting and organizing data, (2) develop an integrated information system for rapidly processing and interpreting data, (3) apply existing technological tools in new ways, and (4) provide accurate and timely information for making right management decisions. The Forest Service developed an integrated information system using remote sensors, microdensitometers, computer hardware and software, and interactive accessories. Their efforts substantially reduce the time it takes for collecting and processing data.

Fixation of strategies with the Moran and Fermi processes in evolutionary games

NASA Astrophysics Data System (ADS)

Liu, Xuesong; He, Mingfeng; Kang, Yibin; Pan, Qiuhui

2017-10-01

A model of stochastic evolutionary game dynamics with finite population was built. It combines the standard Moran and Fermi rules with two strategies cooperation and defection. We obtain the expressions of fixation probabilities and fixation times. The one-third rule which has been found in the frequency dependent Moran process also holds for our model. We obtain the conditions of strategy being an evolutionarily stable strategy in our model, and then make a comparison with the standard Moran process. Besides, the analytical results show that compared with the standard Moran process, fixation occurs with higher probabilities under a prisoner's dilemma game and coordination game, but with lower probabilities under a coexistence game. The simulation result shows that the fixation time in our mixed process is lower than that in the standard Fermi process. In comparison with the standard Moran process, fixation always takes more time on average in spatial populations, regardless of the game. In addition, the fixation time decreases with the growth of the number of neighbors.

File text security using Hybrid Cryptosystem with Playfair Cipher Algorithm and Knapsack Naccache-Stern Algorithm

NASA Astrophysics Data System (ADS)

Amalia; Budiman, M. A.; Sitepu, R.

2018-03-01

Cryptography is one of the best methods to keep the information safe from security attack by unauthorized people. At present, Many studies had been done by previous researchers to generate a more robust cryptographic algorithm to provide high security for data communication. To strengthen data security, one of the methods is hybrid cryptosystem method that combined symmetric and asymmetric algorithm. In this study, we observed a hybrid cryptosystem method contain Modification Playfair Cipher 16x16 algorithm as a symmetric algorithm and Knapsack Naccache-Stern as an asymmetric algorithm. We observe a running time of this hybrid algorithm with some of the various experiments. We tried different amount of characters to be tested which are 10, 100, 1000, 10000 and 100000 characters and we also examined the algorithm with various key’s length which are 10, 20, 30, 40 of key length. The result of our study shows that the processing time for encryption and decryption process each algorithm is linearly proportional, it means the longer messages character then, the more significant times needed to encrypt and decrypt the messages. The encryption running time of Knapsack Naccache-Stern algorithm takes a longer time than its decryption, while the encryption running time of modification Playfair Cipher 16x16 algorithm takes less time than its decryption.

LMI designmethod for networked-based PID control

NASA Astrophysics Data System (ADS)

Souza, Fernando de Oliveira; Mozelli, Leonardo Amaral; de Oliveira, Maurício Carvalho; Palhares, Reinaldo Martinez

2016-10-01

In this paper, we propose a methodology for the design of networked PID controllers for second-order delayed processes using linear matrix inequalities. The proposed procedure takes into account time-varying delay on the plant, time-varying delays induced by the network and packed dropouts. The design is carried on entirely using a continuous-time model of the closed-loop system where time-varying delays are used to represent sampling and holding occurring in a discrete-time digital PID controller.

[Significance of occupational and interpersonal relationships among residents during the specialization training course].

PubMed

Cumplido-Hernández, Gustavo; Campos-Arciniega, María Faustina; Chávez-López, Arturo

2007-01-01

Medical specialty training courses have peculiar characteristics that probably influence the learning process of the residents. These training courses take place in large hospitals; the residents are subjected to a rigorous selection process, and at the same time they are affiliated employees of the institution. They work long shifts and are immersed in complex academic and occupational relationships. This study aims to ascertain the significance that these future specialists give to the environment where the training course takes place in relation with their learning process. We used the social anthropology narrative analysis method. A theoretical social perspective was used to emphasize on the context to explain the reality in which the residents live. Discipline, workload, conflictive relationships and strength of family ties were the most significant elements.

Joint Force Quarterly. Number 33, Winter 2002-03

DTIC Science & Technology

2003-04-01

by Richard B. Myers 9 A Quiet Revolution: Nuclear Strategy for the 21st Century by James J. Wirtz and James A. Russell 16 Army SOF in Afghanistan...warfighting strategies of attrition or annihilation. The Coalition commander would restrict enemy decisionmaking processes in order to take away options...highlighted the role of precision and ad hoc innovations in the area of time-sensitive targeting Winter 2002–03 / JFQ 5 F/A–18C taking off, Iraqi Freedom

Inclined to see it your way: Do altercentric intrusion effects in visual perspective taking reflect an intrinsically social process?

PubMed

Kragh Nielsen, Maria; Slade, Lance; Levy, Joseph P; Holmes, Amanda

2015-01-01

It has been suggested that some aspects of mental state understanding recruit a rudimentary, but fast and efficient, processing system, demonstrated by the obligatory slowing down of judgements about what the self can see when this is incongruent with what another can see. We tested the social nature of this system by investigating to what extent these altercentric intrusions are elicited under conditions that differed in their social relevance and, further, how these related to self-reported social perspective taking and empathy. In Experiment 1, adult participants were asked to make "self" or "other" perspective-taking judgements during congruent ("self" and "other" can see the same items) or incongruent conditions ("self" and "other" cannot see the same items) in conditions that were social (i.e., involving a social agent), semisocial (an arrow), or nonsocial (a dual-coloured block). Reaction time indices of altercentric intrusion effects were present across all conditions, but were significantly stronger for the social than for the less social conditions. Self-reported perspective taking and empathy correlated with altercentric intrusion effects in the social condition only. In Experiment 2, the significant correlations for the social condition were replicated, but this time with gaze duration indices of altercentric intrusion effects. Findings are discussed with regard to the degree to which this rudimentary system is socially specialized and how it is linked to more conceptual understanding.

Method for Reducing the Refresh Rate of Fiber Bragg Grating Sensors

NASA Technical Reports Server (NTRS)

Parker, Allen R., Jr. (Inventor)

2014-01-01

The invention provides a method of obtaining the FBG data in final form (transforming the raw data into frequency and location data) by taking the raw FBG sensor data and dividing the data into a plurality of segments over time. By transforming the raw data into a plurality of smaller segments, processing time is significantly decreased. Also, by defining the segments over time, only one processing step is required. By employing this method, the refresh rate of FBG sensor systems can be improved from about 1 scan per second to over 20 scans per second.

Time-based analysis of the apheresis platelet supply chain in England.

PubMed

Wilding, R; Cotton, S; Dobbin, J; Chapman, J; Yates, N

2011-10-01

During 2009/2010 loss of platelets within NHS Blood and Transplant (NHSBT) due to time expiry was 9.3%. Hospitals remain reluctant to hold stocks of platelets due to the poor shelf life at issue. The purpose of this study was to identify areas for time compression in the apheresis platelet supply chain to extend the shelf life available for hospitals and reduce wastage in NHSBT. This was done within the context of NHSBT reconfiguring their supply chain and moving towards a consolidated and centralised approach. Time based process mapping was applied to identify value and non-value adding time in two manufacturing models. A large amount of the non-value adding time in the apheresis platelet supply chain is due to transportation and waiting for the next process in the manufacturing process to take place. Time based process mapping provides an effective 'lens' for supply chain professionals to identify opportunities for improvement in the platelet supply chain. © 2011 The Author(s). Vox Sanguinis © 2011 International Society of Blood Transfusion.

Time takes space: selective effects of multitasking on concurrent spatial processing.

PubMed

Mäntylä, Timo; Coni, Valentina; Kubik, Veit; Todorov, Ivo; Del Missier, Fabio

2017-08-01

Many everyday activities require coordination and monitoring of complex relations of future goals and deadlines. Cognitive offloading may provide an efficient strategy for reducing control demands by representing future goals and deadlines as a pattern of spatial relations. We tested the hypothesis that multiple-task monitoring involves time-to-space transformational processes, and that these spatial effects are selective with greater demands on coordinate (metric) than categorical (nonmetric) spatial relation processing. Participants completed a multitasking session in which they monitored four series of deadlines, running on different time scales, while making concurrent coordinate or categorical spatial judgments. We expected and found that multitasking taxes concurrent coordinate, but not categorical, spatial processing. Furthermore, males showed a better multitasking performance than females. These findings provide novel experimental evidence for the hypothesis that efficient multitasking involves metric relational processing.

Women's lived experiences of learning to live with osteoporosis: a longitudinal qualitative study.

PubMed

Hansen, Carrinna A; Abrahamsen, Bo; Konradsen, Hanne; Pedersen, Birthe D

2017-03-09

A vast amount of literature exists concerning pharmaceutical adherence in osteoporosis. However, the process of learning to live with osteoporosis over time remains largely unknown. The purpose of this study was to gain a deeper understanding of the continued process of how women learn to live with osteoporosis. Our objective was to explore what characterizes women's experiences of living with osteoporosis during the first year after diagnosis, when patients are prescribed anti-osteoporotic treatment, without having experienced an osteoporotic fracture. Forty-two narrative qualitative interviews were conducted with fifteen recently diagnosed Danish women. A longitudinal design was chosen since this allows an investigation of the perspective over time. The interviews were conducted in the period of March 2011 to August 2012. Data were analyzed using a phenomenological-hermeneutic interpretation of text. No medical records were available for the researchers. All information with the exception of T-score was self-reported. The participants' experiences could be described in two key themes developed through the analysis: 1) "To become influenced by the medical treatment" which consisted of two sub-themes "taking the medication", and "discontinuing the medication". 2) "Daily life with osteoporosis", which was characterized by three sub-themes: "interpretation of symptoms", "interpretation of the scan results" and "lifestyle reflections". The results highlighted that learning to live with osteoporosis is a multifaceted process that is highly influenced by the medical treatment. In some cases, this is a prolonged process that can take around one year. The results suggest a need for improved support for individual women during the complex process of learning to live with osteoporosis. The study adds new knowledge that can be useful for healthcare professionals taking a health-oriented stance when supporting women in self-management of their illness. Further investigations of lived experiences over time in the field of osteoporosis research are therefore needed.

Real-time blind image deconvolution based on coordinated framework of FPGA and DSP

NASA Astrophysics Data System (ADS)

Wang, Ze; Li, Hang; Zhou, Hua; Liu, Hongjun

2015-10-01

Image restoration takes a crucial place in several important application domains. With the increasing of computation requirement as the algorithms become much more complexity, there has been a significant rise in the need for accelerating implementation. In this paper, we focus on an efficient real-time image processing system for blind iterative deconvolution method by means of the Richardson-Lucy (R-L) algorithm. We study the characteristics of algorithm, and an image restoration processing system based on the coordinated framework of FPGA and DSP (CoFD) is presented. Single precision floating-point processing units with small-scale cascade and special FFT/IFFT processing modules are adopted to guarantee the accuracy of the processing. Finally, Comparing experiments are done. The system could process a blurred image of 128×128 pixels within 32 milliseconds, and is up to three or four times faster than the traditional multi-DSPs systems.

Complex network approach to fractional time series

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manshour, Pouya

In order to extract correlation information inherited in stochastic time series, the visibility graph algorithm has been recently proposed, by which a time series can be mapped onto a complex network. We demonstrate that the visibility algorithm is not an appropriate one to study the correlation aspects of a time series. We then employ the horizontal visibility algorithm, as a much simpler one, to map fractional processes onto complex networks. The degree distributions are shown to have parabolic exponential forms with Hurst dependent fitting parameter. Further, we take into account other topological properties such as maximum eigenvalue of the adjacencymore » matrix and the degree assortativity, and show that such topological quantities can also be used to predict the Hurst exponent, with an exception for anti-persistent fractional Gaussian noises. To solve this problem, we take into account the Spearman correlation coefficient between nodes' degrees and their corresponding data values in the original time series.« less

Adaptive tracking of a time-varying field with a quantum sensor

NASA Astrophysics Data System (ADS)

Bonato, Cristian; Berry, Dominic W.

2017-05-01

Sensors based on single spins can enable magnetic-field detection with very high sensitivity and spatial resolution. Previous work has concentrated on sensing of a constant magnetic field or a periodic signal. Here, we instead investigate the problem of estimating a field with nonperiodic variation described by a Wiener process. We propose and study, by numerical simulations, an adaptive tracking protocol based on Bayesian estimation. The tracking protocol updates the probability distribution for the magnetic field based on measurement outcomes and adapts the choice of sensing time and phase in real time. By taking the statistical properties of the signal into account, our protocol strongly reduces the required measurement time. This leads to a reduction of the error in the estimation of a time-varying signal by up to a factor of four compare with protocols that do not take this information into account.

General approach to boat simulation in virtual reality systems

NASA Astrophysics Data System (ADS)

Aranov, Vladislav Y.; Belyaev, Sergey Y.

2002-02-01

The paper is dedicated to real time simulation of sport boats, particularly a kayak and high-speed skimming boat, for training goals. This training is issue of the day, since kayaking and riding a high-speed skimming boat are both extreme sports. Participating in such types of competitions puts sportsmen into danger, particularly due to rapids, waterfalls, different water streams, and other obstacles. In order to make the simulation realistic, it is necessary to calculate data for at least 30 frames per second. These calculations may take not more than 5% CPU time, because very time-consuming 3D rendering process takes the rest - 95% CPU time. This paper describes an approach for creating minimal boat simulator models that satisfy the mentioned requirements. Besides, this approach can be used for other watercraft models of this kind.

DigiMemo: Facilitating the Note Taking Process

ERIC Educational Resources Information Center

Kurt, Serhat

2009-01-01

Everyone takes notes daily for various reasons. Note taking is very popular in school settings and generally recognized as an effective learning strategy. Further, note taking is a complex process because it requires understanding, selection of information and writing. Some new technological tools may facilitate the note taking process. Among such…

Exploring the Interactive Patterns of Concept Map-Based Online Discussion: A Sequential Analysis of Users' Operations, Cognitive Processing, and Knowledge Construction

ERIC Educational Resources Information Center

Wu, Sheng-Yi; Chen, Sherry Y.; Hou, Huei-Tse

2016-01-01

Concept maps can be used as a cognitive tool to assist learners' knowledge construction. However, in a concept map-based online discussion environment, studies that take into consideration learners' manipulative actions of composing concept maps, cognitive process among learners' discussion, and social knowledge construction at the same time are…

Finger-Writing Intervention Impacts the Spelling and Handwriting Skills of Children with Developmental Language Disorder: A Multiple Single-Case Study

ERIC Educational Resources Information Center

Van Reybroeck, Marie; Michiels, Nathalie

2018-01-01

Learning to use grapheme to phoneme correspondences (GPCs) provides a powerful mechanism for the foundation of reading skills in children. However, for some children, such as those with Developmental Language Disorder (DLD), the GPC learning process takes time, is laborious, and impacts the entire reading and spelling processes. The present study…

Towards a Better Understanding of Academic Persistence among Fresh-Men: A Qualitative Approach

ERIC Educational Resources Information Center

Roland, Nathalie; Frenay, Mariane; Boudrenghien, Gentiane

2016-01-01

Persistence in the first year at university is a phenomenon that has been studied many times. However, most research has taken a very linear view of the persistence process and little research has attempted to understand persistence by taking into account its full complexity. Yet the process of academic persistence is punctuated by striking events…

Comparing Problem-Based Learning Students to Students in a Lecture-Based Curriculum: Learning Strategies and the Relation with Self-Study Time

ERIC Educational Resources Information Center

Wijnen, Marit; Loyens, Sofie M. M.; Smeets, Guus; Kroeze, Maarten; van der Molen, Henk

2017-01-01

In educational theory, deep processing (i.e., connecting different study topics together) and self-regulation (i.e., taking control over one's own learning process) are considered effective learning strategies. These learning strategies can be influenced by the learning environment. Problem-based learning (PBL), a student-centered educational…

Putting It All Together: A Unified Account of Word Recognition and Reaction-Time Distributions

ERIC Educational Resources Information Center

Norris, Dennis

2009-01-01

R. Ratcliff, P. Gomez, and G. McKoon (2004) suggested much of what goes on in lexical decision is attributable to decision processes and may not be particularly informative about word recognition. They proposed that lexical decision should be characterized by a decision process, taking the form of a drift-diffusion model (R. Ratcliff, 1978), that…

Reduced order model based on principal component analysis for process simulation and optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lang, Y.; Malacina, A.; Biegler, L.

2009-01-01

It is well-known that distributed parameter computational fluid dynamics (CFD) models provide more accurate results than conventional, lumped-parameter unit operation models used in process simulation. Consequently, the use of CFD models in process/equipment co-simulation offers the potential to optimize overall plant performance with respect to complex thermal and fluid flow phenomena. Because solving CFD models is time-consuming compared to the overall process simulation, we consider the development of fast reduced order models (ROMs) based on CFD results to closely approximate the high-fidelity equipment models in the co-simulation. By considering process equipment items with complicated geometries and detailed thermodynamic property models,more » this study proposes a strategy to develop ROMs based on principal component analysis (PCA). Taking advantage of commercial process simulation and CFD software (for example, Aspen Plus and FLUENT), we are able to develop systematic CFD-based ROMs for equipment models in an efficient manner. In particular, we show that the validity of the ROM is more robust within well-sampled input domain and the CPU time is significantly reduced. Typically, it takes at most several CPU seconds to evaluate the ROM compared to several CPU hours or more to solve the CFD model. Two case studies, involving two power plant equipment examples, are described and demonstrate the benefits of using our proposed ROM methodology for process simulation and optimization.« less

Capturing and Modeling Domain Knowledge Using Natural Language Processing Techniques

DTIC Science & Technology

2005-06-01

Intelligence Artificielle , France, May 2001, p. 109- 118 [Barrière, 2001] -----. “Investigating the Causal Relation in Informative Texts”. Terminology, 7:2...out of the flood of information, military have to create new ways of processing sensor and intelligence information, and of providing the results to...have to create new ways of processing sensor and intelligence information, and of providing the results to commanders who must take timely operational

4 Steps for Redesigning Time for Student and Teacher Learning

ERIC Educational Resources Information Center

Nazareno, Lori

2017-01-01

Everybody complains about a lack of time in school, but few are prepared to do anything about it. Laying the foundation before making such a shift is essential to the success of the change. Once a broad-based team has been chosen to do the work, they can follow a process explained in four steps with the apt acronym of T.I.M.E.: Taking stock,…

Microfluidic droplet-based liquid-liquid extraction.

PubMed

Mary, Pascaline; Studer, Vincent; Tabeling, Patrick

2008-04-15

We study microfluidic systems in which mass exchanges take place between moving water droplets, formed on-chip, and an external phase (octanol). Here, no chemical reaction takes place, and the mass exchanges are driven by a contrast in chemical potential between the dispersed and continuous phases. We analyze the case where the microfluidic droplets, occupying the entire width of the channel, extract a solute-fluorescein-from the external phase (extraction) and the opposite case, where droplets reject a solute-rhodamine-into the external phase (purification). Four flow configurations are investigated, based on straight or zigzag microchannels. Additionally to the experimental work, we performed two-dimensional numerical simulations. In the experiments, we analyze the influence of different parameters on the process (channel dimensions, fluid viscosities, flow rates, drop size, droplet spacing, ...). Several regimes are singled out. In agreement with the mass transfer theory of Young et al. (Young, W.; Pumir, A.; Pomeau, Y. Phys. Fluids A 1989, 1, 462), we find that, after a short transient, the amount of matter transferred across the droplet interface grows as the square root of time and the time it takes for the transfer process to be completed decreases as Pe-2/3, where Pe is the Peclet number based on droplet velocity and radius. The numerical simulation is found in excellent consistency with the experiment. In practice, the transfer time ranges between a fraction and a few seconds, which is much faster than conventional systems.

Application of recombinant hemagglutinin proteins as alternative antigen standards for pandemic influenza vaccines.

PubMed

Choi, Yejin; Kwon, Seong Yi; Oh, Ho Jung; Shim, Sunbo; Chang, Seokkee; Chung, Hye Joo; Kim, Do Keun; Park, Younsang; Lee, Younghee

2017-09-01

The single radial immunodiffusion (SRID) assay, used to quantify hemagglutinin (HA) in influenza vaccines, requires reference reagents; however, because centralized production of reference reagents may slow the emergency deployment of vaccines, alternatives are needed. We investigated the production of HA proteins using recombinant DNA technology, rather than a traditional egg-based production process. The HA proteins were then used in an SRID assay as a reference antigen. We found that HA can be quantified in both egg-based and cell-based influenza vaccines when recombinant HAs (rHAs) are used as the reference antigen. Furthermore, we confirmed that rHAs obtained from strains with pandemic potential, such as H5N1, H7N3, H7N9, and H9N2 strains, can be utilized in the SRID assay. The rHA production process takes just one month, in contrast to the traditional process that takes three to four months. The use of rHAs may reduce the time required to produce reference reagents and facilitate timely introduction of vaccines during emergencies.

A high-fidelity weather time series generator using the Markov Chain process on a piecewise level

NASA Astrophysics Data System (ADS)

Hersvik, K.; Endrerud, O.-E. V.

2017-12-01

A method is developed for generating a set of unique weather time-series based on an existing weather series. The method allows statistically valid weather variations to take place within repeated simulations of offshore operations. The numerous generated time series need to share the same statistical qualities as the original time series. Statistical qualities here refer mainly to the distribution of weather windows available for work, including durations and frequencies of such weather windows, and seasonal characteristics. The method is based on the Markov chain process. The core new development lies in how the Markov Process is used, specifically by joining small pieces of random length time series together rather than joining individual weather states, each from a single time step, which is a common solution found in the literature. This new Markov model shows favorable characteristics with respect to the requirements set forth and all aspects of the validation performed.

A Multiple Ant Colony Metahuristic for the Air Refueling Tanker Assignment Problem

DTIC Science & Technology

2002-03-01

Problem The tanker assignment problem can be modeled as a job shop scheduling problem ( JSSP ). The JSSP is made up of n jobs, composed of m ordered...points) to be processed on all the machines (tankers). The problem with using JSSP is that the tanker assignment problem has multiple objectives... JSSP will minimize the time it takes for all jobs, but this may take an inordinate number of tankers. Thus using JSSP alone is not necessarily a good

Navy Planning, Programming, Budgeting, and Execution: A Reference Guide for Senior Leaders, Managers, and Action Officers

DTIC Science & Technology

2016-01-01

one- or two-day course to members still trying to learn the abbreviations and acronyms is not an effective way to spend anyone’s time. It takes a...requirements genera- tion process. This guide does not take a position in that debate, but it can offer lessons learned over the past few decades. First...and some lead- ers spend most of their careers learning about just one. But one can be effective sooner and more consistently by remembering and

Making the purchase decision: factors other than price.

PubMed

Lyons, D M

1992-05-01

Taking price out of the limelight and concentrating on customer relations, mutual respect, and build-in/buy-in; involving the user; developing communication and evaluation processes; and being process oriented to attain the results needed require commitment on the part of administration and materiel management. There must be a commitment of time to develop the process, commitment of resources to work through the process, and a commitment of support to enhance the process. With those three parameters in place, price will no longer be the only factor in the purchasing decision.

Black hole based quantum computing in labs and in the sky

NASA Astrophysics Data System (ADS)

Dvali, Gia; Panchenko, Mischa

2016-08-01

Analyzing some well established facts, we give a model-independent parameterization of black hole quantum computing in terms of a set of macro and micro quantities and their relations. These include the relations between the extraordinarily-small energy gap of black hole qubits and important time-scales of information-processing, such as, scrambling time and Page's time. We then show, confirming and extending previous results, that other systems of nature with identical quantum informatics features are attractive Bose-Einstein systems at the critical point of quantum phase transition. Here we establish a complete isomorphy between the quantum computational properties of these two systems. In particular, we show that the quantum hair of a critical condensate is strikingly similar to the quantum hair of a black hole. Irrespectively whether one takes the similarity between the two systems as a remarkable coincidence or as a sign of a deeper underlying connection, the following is evident. Black holes are not unique in their way of quantum information processing and we can manufacture black hole based quantum computers in labs by taking advantage of quantum criticality.

Enhancement of signal-to-noise ratio in Brillouin optical time domain analyzers by dual-probe detection

NASA Astrophysics Data System (ADS)

Iribas, Haritz; Loayssa, Alayn; Sauser, Florian; Llera, Miguel; Le Floch, Sébastien

2017-04-01

We demonstrate a simple technique to enhance the signal-to-noise ratio (SNR) in Brillouin optical time-domain analysis sensors by the addition of gain and loss processes. The technique is based on the shift of the pump pulse optical frequency in a double-sideband probe system, so that the gain and loss processes take place at different frequencies. In this manner, the loss and the gain do not cancel each other out, and it makes possible to take advantage of both informations at the same time, obtaining an improvement of 3 dB on the SNR. Furthermore, the technique does not need an optical filtering, so that larger improvement on SNR and a simplification of the setup are obtained. The method is experimentally demonstrated in a 101 km fiber spool, obtaining a measurement uncertainty of 2.6 MHz (2σ) at the worst-contrast position for 2 m spatial resolution. This leads, to the best of our knowledge, to the highest figure-of-merit in a BOTDA without using coding or raman amplification.

Increasing the power of accelerated molecular dynamics methods and plans to exploit the coming exascale

NASA Astrophysics Data System (ADS)

Voter, Arthur

Many important materials processes take place on time scales that far exceed the roughly one microsecond accessible to molecular dynamics simulation. Typically, this long-time evolution is characterized by a succession of thermally activated infrequent events involving defects in the material. In the accelerated molecular dynamics (AMD) methodology, known characteristics of infrequent-event systems are exploited to make reactive events take place more frequently, in a dynamically correct way. For certain processes, this approach has been remarkably successful, offering a view of complex dynamical evolution on time scales of microseconds, milliseconds, and sometimes beyond. We have recently made advances in all three of the basic AMD methods (hyperdynamics, parallel replica dynamics, and temperature accelerated dynamics (TAD)), exploiting both algorithmic advances and novel parallelization approaches. I will describe these advances, present some examples of our latest results, and discuss what should be possible when exascale computing arrives in roughly five years. Funded by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, and by the Los Alamos Laboratory Directed Research and Development program.

"I Just Didn't Have Enough Time..." Assisting the Busy Adult Learner Develop Critical Reading and Thinking Skills.

ERIC Educational Resources Information Center

Diaz-Lefebvre, Rene

Several factors are related to adult students' completion or noncompletion of reading assignments before class--lack of study time, their motivation for taking college classes, their need to feel involved in the learning process, and their expectations for success in the classroom. One of the biggest fears of adults returning to a school…

Inhibitory Control in Mind and Brain: An Interactive Race Model of Countermanding Saccades

ERIC Educational Resources Information Center

Boucher, Leanne; Palmeri, Thomas J.; Logan, Gordon D.; Schall, Jeffrey D.

2007-01-01

The stop-signal task has been used to study normal cognitive control and clinical dysfunction. Its utility is derived from a race model that accounts for performance and provides an estimate of the time it takes to stop a movement. This model posits a race between go and stop processes with stochastically independent finish times. However,…

[The ethic dimension of daily tasks in the formation process of nurses].

PubMed

Fernandes, Josicélia Dumêt; Rosa, Darci de Oliveira Santa; Vieira, Therezinha Teixeira; Sadigursky, Dora

2008-06-01

This theoretical article had as its object of study the ethic dimension of the formation process of nurses taking in consideration the National Curricular Directives for Nursing Courses. It was based on the presuppositions of ethics and their relationship with the implementation of changes in the formation process of nurses, using as reference elements of ethical behavior in the formation and attempting to bring the reflection to current times and thus contribute to define a direction to Nursing education. It was concluded that the ethical dimension in the formation of nurses involves values that permeate the relations between the subjects of this process and nature itself. The study points out the need to transform the practices of students and teachers and change the current curriculum framework, highlighting elements that indicate that the concern with ethics when developing the curriculum framework is not limited to how a discipline is taught, but pass through as practices that take place in the education process.

Initial stage of nucleation-mediated crystallization of a supercooled melt

NASA Astrophysics Data System (ADS)

Chernov, A. A.; Pil'nik, A. A.; Islamov, D. R.

2016-09-01

The kinetic model of nucleation-mediated crystallization of a supercooled melt is presented in this work. It correctly takes into account the change in supercooling of the initial phase in the process of formation and evolution of a new phase. The model makes it possible to find the characteristic time of the process, time course of the crystal phase volume, solidified material microstructure. The distinctive feature of the model is the use of the "forbidden" zones in the volume where the formation of new nucleation centers is suppressed.

Prevention of the first cesarean delivery.

PubMed

Spong, Catherine Y

2015-06-01

Education of providers and patients on the importance of vaginal delivery, for the current pregnancy as well as future pregnancies, is essential to reverse the current trend of primary cesareans. When discussing cesarean with patients, counseling should include the effect on subsequent pregnancy risks including the possibility of uterine rupture and placentation abnormalities. In addition, counseling must include the concept that normal labor takes time. Re-education on the natural process of labor, the importance of allowing the time needed, and patience with the duration of pregnancy and process of labor is essential. Published by Elsevier Inc.

Acceptor number-dependent ultrafast photo-physical properties of push-pull chromophores using time-resolved methods

NASA Astrophysics Data System (ADS)

Chi, Xiao-Chun; Wang, Ying-Hui; Gao, Yu; Sui, Ning; Zhang, Li-Quan; Wang, Wen-Yan; Lu, Ran; Ji, Wen-Yu; Yang, Yan-Qiang; Zhang, Han-Zhuang

2018-04-01

Three push-pull chromophores comprising a triphenylamine (TPA) as electron-donating moiety and functionalized β-diketones as electron acceptor units are studied by various spectroscopic techniques. The time-correlated single-photon counting data shows that increasing the number of electron acceptor units accelerates photoluminescence relaxation rate of compounds. Transient spectra data shows that intramolecular charge transfer (ICT) takes place from TPA units to β-diketones units after photo-excitation. Increasing the number of electron acceptor units would prolong the generation process of ICT state, and accelerate the excited molecule reorganization process and the relaxation process of ICT state.

Automated Estimation of the Orbital Parameters of Jupiter's Moons

NASA Astrophysics Data System (ADS)

Western, Emma; Ruch, Gerald T.

2016-01-01

Every semester the Physics Department at the University of St. Thomas has the Physics 104 class complete a Jupiter lab. This involves taking around twenty images of Jupiter and its moons with the telescope at the University of St. Thomas Observatory over the course of a few nights. The students then take each image and find the distance from each moon to Jupiter and plot the distances versus the elapsed time for the corresponding image. Students use the plot to fit four sinusoidal curves of the moons of Jupiter. I created a script that automates this process for the professor. It takes the list of images and creates a region file used by the students to measure the distance from the moons to Jupiter, a png image that is the graph of all the data points and the fitted curves of the four moons, and a csv file that contains the list of images, the date and time each image was taken, the elapsed time since the first image, and the distances to Jupiter for Io, Europa, Ganymede, and Callisto. This is important because it lets the professor spend more time working with the students and answering questions as opposed to spending time fitting the curves of the moons on the graph, which can be time consuming.

Topology-dependent density optima for efficient simultaneous network exploration

NASA Astrophysics Data System (ADS)

Wilson, Daniel B.; Baker, Ruth E.; Woodhouse, Francis G.

2018-06-01

A random search process in a networked environment is governed by the time it takes to visit every node, termed the cover time. Often, a networked process does not proceed in isolation but competes with many instances of itself within the same environment. A key unanswered question is how to optimize this process: How many concurrent searchers can a topology support before the benefits of parallelism are outweighed by competition for space? Here, we introduce the searcher-averaged parallel cover time (APCT) to quantify these economies of scale. We show that the APCT of the networked symmetric exclusion process is optimized at a searcher density that is well predicted by the spectral gap. Furthermore, we find that nonequilibrium processes, realized through the addition of bias, can support significantly increased density optima. Our results suggest alternative hybrid strategies of serial and parallel search for efficient information gathering in social interaction and biological transport networks.

26 CFR 1.924(d)-1 - Requirement that economic processes take place outside the United States.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 10 2011-04-01 2011-04-01 false Requirement that economic processes take place... Citizens of United States § 1.924(d)-1 Requirement that economic processes take place outside the United... any transaction only if economic processes with respect to such transaction take place outside the...

Parallel Vision Algorithm Design and Implementation 1988 End of Year Report

DTIC Science & Technology

1989-08-01

as a local operation, the provided C code used raster order processing to speed up execution time. This made it impossible to implement the code using...Apply, which does not allow the programmer to take advantage of raster order processing . Therefore, the 5x5 median filter algorithm was a straight...possible to exploit raster- order processing in W2, giving greater efficiency. The first advantage is the reason that connected components and the Hough

European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Tutorials

DTIC Science & Technology

1997-06-17

There is Good and Bad News With CMMs8 *bad news: process improvement takes time *good news: the first benefit Is better schedule management With PSP s...e g similar supp v EURO not sudden death toolset for assessment and v EURO => Business benefits detailed analysis) . EURO could collapse (low risk...from SPI live on even after year 2000. Priority BENEFITS Actions * Improved management and application development processes * Strengthened Change

How the risky features of previous selection affect subsequent decision-making: evidence from behavioral and fMRI measures.

PubMed

Dong, Guangheng; Zhang, Yifen; Xu, Jiaojing; Lin, Xiao; Du, Xiaoxia

2015-01-01

Human decision making is rarely conducted in temporal isolation. It is often biased and affected by environmental variables, particularly prior selections. In this study, we used a task that simulates a real gambling process to explore the effect of the risky features of a previous selection on subsequent decision making. Compared with decision making after an advantageous risk-taking situation (Risk_Adv), that after a disadvantageous risk-taking situation (Risk_Disadv) is associated with a longer response time (RT, the time spent in making decisions) and higher brain activations in the caudate and the dorsolateral prefrontal cortex (DLPFC). Compared with decisions after Risk_Adv, those after Risk_Disadv in loss trials are associated with higher brain activations in the left superior temporal gyrus (STG) and the precuneus. Brain activity and relevant RTs significantly correlated. Overall, people who experience disadvantageous risk-taking selections tend to focus on current decision making and engage cognitive endeavors in value evaluation and in the regulation of their risk-taking behaviors during decision making.

Transfer Students: Postsecondary Institutions Could Promote More Consistent Consideration of Coursework by Not Basing Determinations on Accreditation. Report to Congressional Requesters. GAO-06-22

ERIC Educational Resources Information Center

Ashby, Cornelia M.

2005-01-01

Each year thousands of students transfer from one postsecondary institution to another. The credit transfer process, to the extent that it delays students' progress, can affect the affordability of postsecondary education and the time it takes students to graduate. Seeking information on the processes and requirements that postsecondary…

Aligning Career with Faith: Reflective Practice for Christian Nurse Educators.

PubMed

McKnight, Heather

Christian nurses are challenged by the process of incorporating faith and Christianity into their career. Nurse educators are particularly challenged to embed Christian principles into the tenure and promotion journey. Developing a God-inspired plan takes time and patience. Prayer, reflective practice, evaluation, decisions, and follow-through are areas that can be incorporated to infuse faith throughout the tenure and promotion process.

Championship Communication

ERIC Educational Resources Information Center

VanDerveer, Beth; Butterick, Betsy

2017-01-01

This article discusses team development and focuses specifically on championship communication and team-building activities. Team development takes time and the process typically occurs in stages. Regardless of the sport or what the competitive field may look like, communication is an often overlooked, yet vital element in cultivating a…

Low elevation inland habitats of the Willamette River floodplain support enhanced denitrification

EPA Science Inventory

Floodplain nitrate removal via denitrification in sediment provides an important ecosystem service that may be a valuable sink for nitrate pollution. At this time, much floodplain restoration is taking place with little consideration for in-situ nutrient processing, necessitating...

Diffusion Bonding of Microduplex Stainless Steel and Ti Alloy with and without Interlayer: Interface Microstructure and Strength Properties

NASA Astrophysics Data System (ADS)

Kundu, S.; Sam, S.; Mishra, B.; Chatterjee, S.

2014-01-01

The interface microstructure and strength properties of solid state diffusion bonding of microduplex stainless steel (MDSS) to Ti alloy (TiA) with and without a Ni alloy (NiA) intermediate material were investigated at 1173 K (900 °C) for 0.9 to 5.4 ks in steps of 0.9 ks in vacuum. The effects of bonding time on the microstructure of the bonded joint have been analyzed by light optical microscopy and scanning electron microscopy in the backscattered mode. In the direct bonded joints of MDSS and TiA, the layer-wise σ phase and the λ + FeTi phase mixture were observed at the bond interface when the joint was processed for 2.7 ks and above holding times. However, when NiA was used as an intermediate material, the results indicated that TiNi3, TiNi, and Ti2Ni are formed at the NiA-TiA interface, and the irregular shaped particles of Fe22Mo20Ni45Ti13 have been observed within the TiNi3 intermetallic layer. The stainless steel-NiA interface is free from intermetallics and the layer of austenitic phase was observed at the stainless steel side. A maximum tensile strength of ~520 MPa, shear strength of ~405 MPa, and impact toughness of ~18 J were obtained for the directly bonded joint when processed for 2.7 ks. However, when nickel base alloy was used as an intermediate material in the same materials, the bond tensile and shear strengths increase to ~640 and ~479 MPa, respectively, and the impact toughness to ~21 J when bonding was processed for 4.5 ks. Fracture surface observations in scanning electron microscopy using energy dispersive spectroscopy demonstrate that in MDSS-TiA joints, failure takes place through the FeTi + λ phase when bonding was processed for 2.7 ks; however, failure takes place through σ phase for the diffusion joints processed for 3.6 ks and above processing times. However, in MDSS-NiA-TiA joints, the fracture takes place through NiTi2 layer at the NiA-TiA interface for all bonding times.

Two-dimensional time-dependent modelling of fume formation in a pulsed gas metal arc welding process

NASA Astrophysics Data System (ADS)

Boselli, M.; Colombo, V.; Ghedini, E.; Gherardi, M.; Sanibondi, P.

2013-06-01

Fume formation in a pulsed gas metal arc welding (GMAW) process is investigated by coupling a time-dependent axi-symmetric two-dimensional model, which takes into account both droplet detachment and production of metal vapour, with a model for fume formation and transport based on the method of moments for the solution of the aerosol general dynamic equation. We report simulative results of a pulsed process (peak current = 350 A, background current 30 A, period = 9 ms) for a 1 mm diameter iron wire, with Ar shielding gas. Results showed that metal vapour production occurs mainly at the wire tip, whereas fume formation is concentrated in the fringes of the arc in the spatial region close to the workpiece, where metal vapours are transported by convection. The proposed modelling approach allows time-dependent tracking of fumes also in plasma processes where temperature-time variations occur faster than nanoparticle transport from the nucleation region to the surrounding atmosphere, as is the case for most pulsed GMAW processes.

Cognitive costs of decision-making strategies: A resource demand decomposition analysis with a cognitive architecture.

PubMed

Fechner, Hanna B; Schooler, Lael J; Pachur, Thorsten

2018-01-01

Several theories of cognition distinguish between strategies that differ in the mental effort that their use requires. But how can the effort-or cognitive costs-associated with a strategy be conceptualized and measured? We propose an approach that decomposes the effort a strategy requires into the time costs associated with the demands for using specific cognitive resources. We refer to this approach as resource demand decomposition analysis (RDDA) and instantiate it in the cognitive architecture Adaptive Control of Thought-Rational (ACT-R). ACT-R provides the means to develop computer simulations of the strategies. These simulations take into account how strategies interact with quantitative implementations of cognitive resources and incorporate the possibility of parallel processing. Using this approach, we quantified, decomposed, and compared the time costs of two prominent strategies for decision making, take-the-best and tallying. Because take-the-best often ignores information and foregoes information integration, it has been considered simpler than strategies like tallying. However, in both ACT-R simulations and an empirical study we found that under increasing cognitive demands the response times (i.e., time costs) of take-the-best sometimes exceeded those of tallying. The RDDA suggested that this pattern is driven by greater requirements for working memory updates, memory retrievals, and the coordination of mental actions when using take-the-best compared to tallying. The results illustrate that assessing the relative simplicity of strategies requires consideration of the overall cognitive system in which the strategies are embedded. Copyright © 2017 Elsevier B.V. All rights reserved.

Multiple objects tracking with HOGs matching in circular windows

NASA Astrophysics Data System (ADS)

Miramontes-Jaramillo, Daniel; Kober, Vitaly; Díaz-Ramírez, Víctor H.

2014-09-01

In recent years tracking applications with development of new technologies like smart TVs, Kinect, Google Glass and Oculus Rift become very important. When tracking uses a matching algorithm, a good prediction algorithm is required to reduce the search area for each object to be tracked as well as processing time. In this work, we analyze the performance of different tracking algorithms based on prediction and matching for a real-time tracking multiple objects. The used matching algorithm utilizes histograms of oriented gradients. It carries out matching in circular windows, and possesses rotation invariance and tolerance to viewpoint and scale changes. The proposed algorithm is implemented in a personal computer with GPU, and its performance is analyzed in terms of processing time in real scenarios. Such implementation takes advantage of current technologies and helps to process video sequences in real-time for tracking several objects at the same time.

Process-in-Network: A Comprehensive Network Processing Approach

PubMed Central

Urzaiz, Gabriel; Villa, David; Villanueva, Felix; Lopez, Juan Carlos

2012-01-01

A solid and versatile communications platform is very important in modern Ambient Intelligence (AmI) applications, which usually require the transmission of large amounts of multimedia information over a highly heterogeneous network. This article focuses on the concept of Process-in-Network (PIN), which is defined as the possibility that the network processes information as it is being transmitted, and introduces a more comprehensive approach than current network processing technologies. PIN can take advantage of waiting times in queues of routers, idle processing capacity in intermediate nodes, and the information that passes through the network. PMID:22969390

DDGIPS: a general image processing system in robot vision

NASA Astrophysics Data System (ADS)

Tian, Yuan; Ying, Jun; Ye, Xiuqing; Gu, Weikang

2000-10-01

Real-Time Image Processing is the key work in robot vision. With the limitation of the hardware technique, many algorithm-oriented firmware systems were designed in the past. But their architectures were not flexible enough to achieve a multi-algorithm development system. Because of the rapid development of microelectronics technique, many high performance DSP chips and high density FPGA chips have come to life, and this makes it possible to construct a more flexible architecture in real-time image processing system. In this paper, a Double DSP General Image Processing System (DDGIPS) is concerned. We try to construct a two-DSP-based FPGA-computational system with two TMS320C6201s. The TMS320C6x devices are fixed-point processors based on the advanced VLIW CPU, which has eight functional units, including two multipliers and six arithmetic logic units. These features make C6x a good candidate for a general purpose system. In our system, the two TMS320C6201s each has a local memory space, and they also have a shared system memory space which enables them to intercommunicate and exchange data efficiently. At the same time, they can be directly inter-connected in star-shaped architecture. All of these are under the control of a FPGA group. As the core of the system, FPGA plays a very important role: it takes charge of DPS control, DSP communication, memory space access arbitration and the communication between the system and the host machine. And taking advantage of reconfiguring FPGA, all of the interconnection between the two DSP or between DSP and FPGA can be changed. In this way, users can easily rebuild the real-time image processing system according to the data stream and the task of the application and gain great flexibility.

DDGIPS: a general image processing system in robot vision

NASA Astrophysics Data System (ADS)

Tian, Yuan; Ying, Jun; Ye, Xiuqing; Gu, Weikang

2000-10-01

Real-Time Image Processing is the key work in robot vision. With the limitation of the hardware technique, many algorithm-oriented firmware systems were designed in the past. But their architectures were not flexible enough to achieve a multi- algorithm development system. Because of the rapid development of microelectronics technique, many high performance DSP chips and high density FPGA chips have come to life, and this makes it possible to construct a more flexible architecture in real-time image processing system. In this paper, a Double DSP General Image Processing System (DDGIPS) is concerned. We try to construct a two-DSP-based FPGA-computational system with two TMS320C6201s. The TMS320C6x devices are fixed-point processors based on the advanced VLIW CPU, which has eight functional units, including two multipliers and six arithmetic logic units. These features make C6x a good candidate for a general purpose system. In our system, the two TMS320C6210s each has a local memory space, and they also have a shared system memory space which enable them to intercommunicate and exchange data efficiently. At the same time, they can be directly interconnected in star- shaped architecture. All of these are under the control of FPGA group. As the core of the system, FPGA plays a very important role: it takes charge of DPS control, DSP communication, memory space access arbitration and the communication between the system and the host machine. And taking advantage of reconfiguring FPGA, all of the interconnection between the two DSP or between DSP and FPGA can be changed. In this way, users can easily rebuild the real-time image processing system according to the data stream and the task of the application and gain great flexibility.

Magic Learning Pill: Ontological and Instrumental Learning in Order to Speed Up Education.

PubMed

Matusov, Eugene; Baker, Daniella; Fan, Yueyue; Choi, Hye Jung; L Hampel, Robert

2017-09-01

The purpose of this research is to investigate the phenomenology of learning - people"s attitudes toward their learning experiences that have inherent worth in themselves (i.e., ontological learning) or have value outside of the learning itself (i.e., instrumental learning). In order to explore this topic, 58 participants from the U.S., Russia, and Brazil were interviewed with a central question derived from the science fiction writer Isaac Asimov's short story "Profession": whether participants would take a "Magic Learning Pill" (MLP) to avoid the process of learning, and instead magically acquire the knowledge. The MLP would guarantee the immediate learning by skipping the process of learning while achieving the same effect of gaining skills and knowledge. Almost all participants could think of some learning experiences for which they would take MLP and others for which they would not. Many participants would not take MLP for ontological learning, which is learning experiences that have inherent value for the people, while they would take MLP for instrumental learning, which is learning that mainly serves some other non-educational purposes. The main finding suggests that both instrumental and ontological types of learning are recognized by a wide range of people from diverse cultures as present and valued in their lives. This is especially significant in light of the overwhelmingly instrumental tone of public discourse about education. In the context of formal education, ontological learning was mentioned 35 times (28.0%) while instrumental learning was mentioned 74 times (60.2%). Although ontological learning was often mentioned as taking place outside of school, incorporating pedagogy supporting ontological learning at school deserves consideration.

An improvement of the Earthworm Based Earthquake Alarm Reporting system in Taiwan

NASA Astrophysics Data System (ADS)

Chen, D. Y.; Hsiao, N. C.; Yih-Min, W.

2017-12-01

The Central Weather Bureau of Taiwan (CWB) has operated the Earthworm Based Earthquake Alarm Reporting (eBEAR) system for the purpose of earthquake early warning (EEW). The system has been used to report EEW messages to the general public since 2016 through text message from the mobile phones and the television programs. The system for inland earthquakes is able to provide accurate and fast warnings. The average epicenter error is about 5 km and the processing time is about 15 seconds. The epicenter error is defined as the distance between the epicenter estimated by the EEW system and the epicenter estimated by man. The processing time is defined as the time difference between the time earthquakes occurred and the time the system issued warning. The CWB seismic network consist about 200 seismic stations. In some area of Taiwan the distance between each seismic station is about 10 km. It means that when an earthquake occurred the seismic P wave is able to propagate through 6 stations, which is the minimum number of required stations in the EEW system, within 20 km. If the latency of data transmitting is about 1 sec, the P-wave velocity is about 6 km per sec and we take 3-sec length time window to estimate earthquake magnitude, then the processing should be around 8 sec. In fact, however, the average processing time is larger than this figure. Because some outliers of P-wave onset picks may exist in the beginning of the earthquake occurrence, the Geiger's method we used in the EEW system for earthquake location is not stable. It usually takes more time to wait for enough number of good picks. In this study we used grid search method to improve the estimations of earthquake location. The MAXEL algorithm (Sheen et al., 2015, 2016) was tested in the EEW system by simulating historical earthquakes occurred in Taiwan. The results show the processing time can be reduced and the location accuracy is acceptable for EEW purpose.

Fostering Perseverance

ERIC Educational Resources Information Center

Lewis, Jennifer M.; Özgün-Koca, S. Asli

2016-01-01

Sustaining engagement with a mathematics task is not a novel suggestion for effective mathematics teaching. "Principles and Standards for School Mathematics" (2000) specified that "students need to know that a challenging problem will take some time and that perseverance is an important aspect of the problem-solving process and of…

Decomposition of Time Scales in Linear Systems and Markovian Decision Processes.

DTIC Science & Technology

1980-11-01

this research. I, 3 iv U TABLE OF CONTENTS *Chapter Page *-1. INTRODUCTION .................................................. 1 2. EIGENSTRUCTTJRE...Components ..... o....... 16 2.4. Ordering of State Variables.. ......... ........ 20 2.5. Example - 8th Order Power System Model................ 22 3 ...results. In Chapter 3 we consider the time scale decomposition of singularly perturbed systems. For this problem (1.1) takes the form 12 + u (1.4) 2

An Elementary Teacher's Narrative Identity Work at Two Points in Time Two Decades Apart

ERIC Educational Resources Information Center

Lutovac, Sonja; Kaasila, Raimo

2018-01-01

The number of studies on how the process of identity work takes place in pre- and in-service teacher training contexts has recently increased. This narrative study contributes to this body of work by examining one elementary teacher's identity work in the context of teaching mathematics at two points in time--the present, as an experienced…

Virtual endoscopy using spherical QuickTime-VR panorama views.

PubMed

Tiede, Ulf; von Sternberg-Gospos, Norman; Steiner, Paul; Höhne, Karl Heinz

2002-01-01

Virtual endoscopy needs some precomputation of the data (segmentation, path finding) before the diagnostic process can take place. We propose a method that precomputes multinode spherical panorama movies using Quick-Time VR. This technique allows almost the same navigation and visualization capabilities as a real endoscopic procedure, a significant reduction of interaction input is achieved and the movie represents a document of the procedure.

Dependence of the duration of geomagnetic polarity reversals on site latitude.

PubMed

Clement, Bradford M

2004-04-08

An important constraint on the processes governing the geodynamo--the flow in the outer core responsible for generating Earth's magnetic field--is the duration of geomagnetic polarity reversals; that is, how long it takes for Earth's magnetic field to reverse. It is generally accepted that Earth's magnetic field strength drops to low levels during polarity reversals, and the field direction progresses through a 180 degrees change while the field is weak. The time it takes for this process to happen, however, remains uncertain, with estimates ranging from a few thousand up to 28,000 years. Here I present an analysis of the available sediment records of the four most recent polarity reversals. These records yield an average estimate of about 7,000 years for the time it takes for the directional change to occur. The variation about this mean duration is not random, but instead varies with site latitude, with shorter durations observed at low-latitude sites, and longer durations observed at mid- to high-latitude sites. Such variation of duration with site latitude is predicted by simple geometrical reversal models, in which non-dipole fields are allowed to persist while the axial dipole decays through zero and then builds in the opposite direction, and provides a constraint on numerical dynamo models.

Qualitative Features Extraction from Sensor Data using Short-time Fourier Transform

NASA Technical Reports Server (NTRS)

Amini, Abolfazl M.; Figueroa, Fernando

2004-01-01

The information gathered from sensors is used to determine the health of a sensor. Once a normal mode of operation is established any deviation from the normal behavior indicates a change. This change may be due to a malfunction of the sensor(s) or the system (or process). The step-up and step-down features, as well as sensor disturbances are assumed to be exponential. An RC network is used to model the main process, which is defined by a step-up (charging), drift, and step-down (discharging). The sensor disturbances and spike are added while the system is in drift. The system runs for a period of at least three time-constants of the main process every time a process feature occurs (e.g. step change). The Short-Time Fourier Transform of the Signal is taken using the Hamming window. Three window widths are used. The DC value is removed from the windowed data prior to taking the FFT. The resulting three dimensional spectral plots provide good time frequency resolution. The results indicate distinct shapes corresponding to each process.

Bayesian dynamic mediation analysis.

PubMed

Huang, Jing; Yuan, Ying

2017-12-01

Most existing methods for mediation analysis assume that mediation is a stationary, time-invariant process, which overlooks the inherently dynamic nature of many human psychological processes and behavioral activities. In this article, we consider mediation as a dynamic process that continuously changes over time. We propose Bayesian multilevel time-varying coefficient models to describe and estimate such dynamic mediation effects. By taking the nonparametric penalized spline approach, the proposed method is flexible and able to accommodate any shape of the relationship between time and mediation effects. Simulation studies show that the proposed method works well and faithfully reflects the true nature of the mediation process. By modeling mediation effect nonparametrically as a continuous function of time, our method provides a valuable tool to help researchers obtain a more complete understanding of the dynamic nature of the mediation process underlying psychological and behavioral phenomena. We also briefly discuss an alternative approach of using dynamic autoregressive mediation model to estimate the dynamic mediation effect. The computer code is provided to implement the proposed Bayesian dynamic mediation analysis. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tweedie, A.; Doris, E.

Establishing interconnection to the grid is a recognized barrier to the deployment of distributed energy generation. This report compares interconnection processes for photovoltaic projects in California and Germany. This report summarizes the steps of the interconnection process for developers and utilities, the average length of time utilities take to process applications, and paperwork required of project developers. Based on a review of the available literature, this report finds that while the interconnection procedures and timelines are similar in California and Germany, differences in the legal and regulatory frameworks are substantial.

Safe Manual Jettison

NASA Technical Reports Server (NTRS)

Barton, Jay

2008-01-01

In space, the controlled release of certain cargoes is no less useful than the maritime jettisons from which they take their name but is also much more dangerous. Experience has shown that jettisons can be performed safely, but the process is complicated with the path to performing a jettison taking months or even years. In the background, time is also required to write procedures, train the crew, configure the vehicle, and many other activities. This paper outlines the current process used by the National Aeronautics and Space Administration (NASA) for manual jettisons, detailing the methods used to assure that the jettisons and the jettisoned objects are as safe as achievable and that the crew is adequately trained to be able to affect the safe jettison. The goal of this paper is not only to capture what it takes to perform safe jettisons in the near Earth environment but to extrapolate this knowledge to future space exploration scenarios that will likely have Extravehicular Activity (EVA) and International Partner (IP) interfaces.

Control system of water flow and casting speed in continuous steel casting

NASA Astrophysics Data System (ADS)

Tirian, G. O.; Gheorghiu, C. A.; Hepuţ, T.; Chioncel, C.

2017-05-01

This paper presents the results of research based on real data taken from the installation process at Arcelor Mittal Hunedoara. Using Matlab Simulink an intelligent system is made that takes in data from the process and makes real time adjustments in the rate of flow of the cooling water and the speed of casting that eliminates fissures in the poured material from the secondary cooling of steel. Using Matlab Simulink simulation environment allowed for qualitative analysis for various real world situations. Thus, compared to the old method of approach for the problem of cracks forming in the crust of the steel in the continuous casting, this new method, proposed and developed, brings safety and precision in this complex process, thus removing any doubt on the existence or non-existence of cracks and takes the necessary steps to prevent and correct them.

Traces of Old and New Center-Periphery Dynamics in Language-in-Education Policy and Practice: Insights from a Linguistic Ethnographic Study in Timor-Leste

ERIC Educational Resources Information Center

Da Costa Cabral, Ildegrada; Martin-Jones, Marilyn

2017-01-01

This article reveals how center-periphery relations have unfolded, over time, in language policy processes in one nation--Timor-Leste--on the global periphery. We take a "longue durée" perspective on the language policy processes at work in this historical context, showing how different regimes of language were imposed, in the past, by…

Investigation of Ignition and Combustion Processes of Diesel Engines Operating with Turbulence and Air-storage Chambers

NASA Technical Reports Server (NTRS)

Petersen, Hans

1938-01-01

The flame photographs obtained with combustion-chamber models of engines operating respectively, with turbulence chamber and air-storage chambers or cells, provide an insight into the air and fuel movements that take place before and during combustion in the combustion chamber. The relation between air velocity, start of injection, and time of combustion was determined for the combustion process employing a turbulence chamber.

Technical Objective Document. Fiscal Year 1989

DTIC Science & Technology

1987-12-01

other special interest areas/technologies; and throuch a " delphi " process with the Center Technical Investment Committee *develop a "puts and takes...radar and larce optical systems in space, the detection and trackina of low observables, and the operation of sensors for tracking objects in space for...for reducing the processing time for adaptive beamforming in receive arrays, self-coherina techniques in larce distributed arrays and array self

Enhanced tunability of the composition in silicon oxynitride thin films by the reactive gas pulsing process

NASA Astrophysics Data System (ADS)

Aubry, Eric; Weber, Sylvain; Billard, Alain; Martin, Nicolas

2014-01-01

Silicon oxynitride thin films were sputter deposited by the reactive gas pulsing process. Pure silicon target was sputtered in Ar, N2 and O2 mixture atmosphere. Oxygen gas was periodically and solely introduced using exponential signals. In order to vary the injected O2 quantity in the deposition chamber during one pulse at constant injection time (TON), the tau mounting time τmou of the exponential signals was systematically changed for each deposition. Taking into account the real-time measurements of the discharge voltage and the I(O*)/I(Ar*) emission lines ratio, it is shown that the oscillations of the discharge voltage during the TON and TOFF times (injection of O2 stopped) are attributed to the preferential adsorption of the oxygen compared to that of the nitrogen. The sputtering mode alternates from a fully nitrided mode (TOFF time) to a mixed mode (nitrided and oxidized mode) during the TON time. For the highest injected O2 quantities, the mixed mode tends toward a fully oxidized mode due to an increase of the trapped oxygen on the target. The oxygen (nitrogen) concentration in the SiOxNy films similarly (inversely) varies as the oxygen is trapped. Moreover, measurements of the contamination speed of the Si target surface are connected to different behaviors of the process. At low injected O2 quantities, the nitrided mode predominates over the oxidized one during the TON time. It leads to the formation of Si3N4-yOy-like films. Inversely, the mixed mode takes place for high injected O2 quantities and the oxidized mode prevails against the nitrided one producing SiO2-xNx-like films.

Critical elements in implementations of just-in-time management: empirical study of cement industry in Pakistan.

PubMed

Qureshi, Muhammad Imran; Iftikhar, Mehwish; Bhatti, Mansoor Nazir; Shams, Tauqeer; Zaman, Khalid

2013-01-01

In recent years, inventory management is continuous challenge for all organizations not only due to heavy cost associated with inventory holding, but also it has a great deal to do with the organizations production process. Cement industry is a growing sector of Pakistan's economy which is now facing problems in capacity utilization of their plants. This study attempts to identify the key strategies for successful implementation of just-in-time (JIT) management philosophy on the cement industry of Pakistan. The study uses survey responses from four hundred operations' managers of cement industry in order to know about the advantages and benefits that cement industry have experienced by Just in time (JIT) adoption. The results show that implementing the quality, product design, inventory management, supply chain and production plans embodied through the JIT philosophy which infect enhances cement industry competitiveness in Pakistan. JIT implementation increases performance by lower level of inventory, reduced operations & inventory costs was reduced eliminates wastage from the processes and reduced unnecessary production which is a big challenge for the manufacturer who are trying to maintain the continuous flow processes. JIT implementation is a vital manufacturing strategy that reaches capacity utilization and minimizes the rate of defect in continuous flow processes. The study emphasize the need for top management commitment in order to incorporate the necessary changes that need to take place in cement industry so that JIT implementation can take place in an effective manner.

An efficient start-up circuitry for de-energized ultra-low power energy harvesting systems

NASA Astrophysics Data System (ADS)

Hörmann, Leander B.; Berger, Achim; Salzburger, Lukas; Priller, Peter; Springer, Andreas

2015-05-01

Cyber-physical systems often include small wireless devices to measure physical quantities or control a technical process. These devices need a self-sufficient power supply because no wired infrastructure is available. Their operational time can be enhanced by energy harvesting systems. However, the convertible power is often limited and discontinuous which requires the need of an energy storage unit. If this unit (and thus the whole system) is de-energized, the start-up process may take a significant amount of time because of an inefficient energy harvesting process. Therefore, this paper presents a system which enables a safe and fast start-up from the de-energized state.

76 FR 30246 - Loan Policies and Operations; Loan Purchases From FDIC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

... source of credit and liquidity to borrowers whose operations are financed with System eligible... sound operation of System business. \\6\\ See NationsBank of North Carolina, N.A. v. Variable Annuity Life... provided restructuring financing, because the restructuring process takes time. One System institution...

Report: Congressionally Requested Report on Office of Inspector General Unimplemented Recommendations (Revised)

EPA Pesticide Factsheets

Report #08-P-0123, March 31, 2008. Both program offices and the Office of the Chief Financial Officer, in its oversight role, can do more to monitor the audit followup process and ensure that timely and appropriate corrective actions are taking place.

Time Crystal Behavior of Excited Eigenstates

NASA Astrophysics Data System (ADS)

Syrwid, Andrzej; Zakrzewski, Jakub; Sacha, Krzysztof

2017-12-01

In analogy to spontaneous breaking of continuous space translation symmetry in the process of space crystal formation, it was proposed that spontaneous breaking of continuous time translation symmetry could lead to time crystal formation. In other words, a time-independent system prepared in the energy ground state is expected to reveal periodic motion under infinitely weak perturbation. In the case of the system proposed originally by Wilczek, spontaneous breaking of time translation symmetry cannot be observed if one starts with the ground state. We point out that the symmetry breaking can take place if the system is prepared in an excited eigenstate. The latter can be realized experimentally in ultracold atomic gases. We simulate the process of the spontaneous symmetry breaking due to measurements of particle positions and analyze the lifetime of the resulting symmetry broken state.

Time Crystal Behavior of Excited Eigenstates.

PubMed

Syrwid, Andrzej; Zakrzewski, Jakub; Sacha, Krzysztof

2017-12-22

In analogy to spontaneous breaking of continuous space translation symmetry in the process of space crystal formation, it was proposed that spontaneous breaking of continuous time translation symmetry could lead to time crystal formation. In other words, a time-independent system prepared in the energy ground state is expected to reveal periodic motion under infinitely weak perturbation. In the case of the system proposed originally by Wilczek, spontaneous breaking of time translation symmetry cannot be observed if one starts with the ground state. We point out that the symmetry breaking can take place if the system is prepared in an excited eigenstate. The latter can be realized experimentally in ultracold atomic gases. We simulate the process of the spontaneous symmetry breaking due to measurements of particle positions and analyze the lifetime of the resulting symmetry broken state.

Effect of rheological parameters on curing rate during NBR injection molding

NASA Astrophysics Data System (ADS)

Kyas, Kamil; Stanek, Michal; Manas, David; Skrobak, Adam

2013-04-01

In this work, non-isothermal injection molding process for NBR rubber mixture considering Isayev-Deng curing kinetic model, generalized Newtonian model with Carreau-WLF viscosity was modeled by using finite element method in order to understand the effect of volume flow rate, index of non-Newtonian behavior and relaxation time on the temperature profile and curing rate. It was found that for specific geometry and processing conditions, increase in relaxation time or in the index of non-Newtonian behavior increases the curing rate due to viscous dissipation taking place at the flow domain walls.

Dynamic modeling and parameter estimation of a radial and loop type distribution system network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jun Qui; Heng Chen; Girgis, A.A.

1993-05-01

This paper presents a new identification approach to three-phase power system modeling and model reduction taking power system network as multi-input, multi-output (MIMO) processes. The model estimate can be obtained in discrete-time input-output form, discrete- or continuous-time state-space variable form, or frequency-domain impedance transfer function matrix form. An algorithm for determining the model structure of this MIMO process is described. The effect of measurement noise on the approach is also discussed. This approach has been applied on a sample system and simulation results are also presented in this paper.

[Japanese learners' processing time for reading English relative clauses analyzed in relation to their English listening proficiency].

PubMed

Oyama, Yoshinori

2011-06-01

The present study examined Japanese university students' processing time for English subject and object relative clauses in relation to their English listening proficiency. In Analysis 1, the relation between English listening proficiency and reading span test scores was analyzed. The results showed that the high and low listening comprehension groups' reading span test scores do not differ. Analysis 2 investigated English listening proficiency and processing time for sentences with subject and object relative clauses. The results showed that reading the relative clause ending and the main verb section of a sentence with an object relative clause (such as "attacked" and "admitted" in the sentence "The reporter that the senator attacked admitted the error") takes less time for learners with high English listening scores than for learners with low English listening scores. In Analysis 3, English listening proficiency and comprehension accuracy for sentences with subject and object relative clauses were examined. The results showed no significant difference in comprehension accuracy between the high and low listening-comprehension groups. These results indicate that processing time for English relative clauses is related to the cognitive processes involved in listening comprehension, which requires immediate processing of syntactically complex audio information.

Processing Conversational Implicatures: Alternatives and Counterfactual Reasoning.

PubMed

van Tiel, Bob; Schaeken, Walter

2017-05-01

In a series of experiments, Bott and Noveck (2004) found that the computation of scalar inferences, a variety of conversational implicature, caused a delay in response times. In order to determine what aspect of the inferential process that underlies scalar inferences caused this delay, we extended their paradigm to three other kinds of inferences: free choice inferences, conditional perfection, and exhaustivity in "it"-clefts. In contrast to scalar inferences, the computation of these three kinds of inferences facilitated response times. Following a suggestion made by Chemla and Bott (2014), we propose that the time it takes to compute a conversational implicature depends on the structural characteristics of the required alternatives. Copyright © 2016 Cognitive Science Society, Inc.

Real-time FPGA architectures for computer vision

NASA Astrophysics Data System (ADS)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2000-03-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low level image processing. The FPGA-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on a dedicated VLSI to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real time performance are discussed. Some results are presented and discussed.

Non-equilibrium calculations of atmospheric processes initiated by electron impact.

NASA Astrophysics Data System (ADS)

Campbell, L.; Brunger, M. J.

2007-05-01

Electron impact in the atmosphere produces ionisation, dissociation, electronic excitation and vibrational excitation of atoms and molecules. The products can then take part in chemical reactions, recombination with electrons, or radiative or collisional deactivation. While most such processes are fast, some longer--lived species do not reach equilibrium. The electron source (photoelectrons or auroral electrons) also varies over time and longer-lived species can move substantially in altitude by molecular, ambipolar or eddy diffusion. Hence non-equilibrium calculations are required in some circumstances. Such time-step calculations need to have sufficiently short steps so that the fastest processes are still calculated correctly, but this can lead to computation times that are too large. Hence techniques to allow for longer time steps by incorporating equilibrium calculations are described. Examples are given for results of atmospheric non-equilibrium calculations, including the populations of the vibrational levels of ground state N2, the electron density and its dependence on vibrationally excited N2, predictions of nitric oxide density, and detailed processes during short duration auroral events.

Automatic Derivation of Forest Cover and Forest Cover Change Using Dense Multi-Temporal Time Series Data from Landsat and SPOT 5 Take5

NASA Astrophysics Data System (ADS)

Storch, Cornelia; Wagner, Thomas; Ramminger, Gernot; Pape, Marlon; Ott, Hannes; Hausler, Thomas; Gomez, Sharon

2016-08-01

The paper presents a description of the methods development for an automated processing chain for the classification of Forest Cover and Change based on high resolution multi-temporal time series Landsat and SPOT5Take5 data with focus on the dry forest ecosystems of Africa. The method has been developed within the European Space Agency (ESA) funded Global monitoring for Environment and Security Service Element for Forest Monitoring (GSE FM) project on dry forest areas; the demonstration site selected was in Malawi. The methods are based on the principles of a robust, but still flexible monitoring system, to cope with most complex Earth Observation (EO) data scenarios, varying in terms of data quality, source, accuracy, information content, completeness etc. The method allows automated tracking of change dates, data gap filling and takes into account phenology, seasonality of tree species with respect to leaf fall and heavy cloud cover during the rainy season.

From Ship-To-Shore In Real Time: Data Transmission, Distribution, Management, Processing, And Archiving Using Telepresence Technologies And The Inner Space Center

NASA Astrophysics Data System (ADS)

Coleman, D. F.

2012-12-01

Most research vessels are equipped with satellite Internet services with bandwidths capable of being upgraded to support telepresence technologies and live shore-based participation. This capability can be used for real-time data transmission to shore, where it can be distributed, managed, processed, and archived. The University of Rhode Island Inner Space Center utilizes telepresence technologies and a growing network of command centers on Internet2 to participate live with a variety of research vessels and their ocean observing and sampling systems. High-bandwidth video streaming, voice-over-IP telecommunications, and real-time data feeds and file transfers enable users on shore to take part in the oceanographic expeditions as if they were present on the ship, working in the lab. Telepresence-enabled systematic ocean exploration and similar programs represent a significant and growing paradigm shift that can change the future of seagoing ocean observations using research vessels. The required platform is the ship itself, and users of the technology rely on the ship-based technical teams, but remote and distributed shore-based science users, students, educators, and the general public can now take part by being aboard virtually.

Patterning of Indium Tin Oxide Films

NASA Technical Reports Server (NTRS)

Immer, Christopher

2008-01-01

A relatively rapid, economical process has been devised for patterning a thin film of indium tin oxide (ITO) that has been deposited on a polyester film. ITO is a transparent, electrically conductive substance made from a mixture of indium oxide and tin oxide that is commonly used in touch panels, liquid-crystal and plasma display devices, gas sensors, and solar photovoltaic panels. In a typical application, the ITO film must be patterned to form electrodes, current collectors, and the like. Heretofore it has been common practice to pattern an ITO film by means of either a laser ablation process or a photolithography/etching process. The laser ablation process includes the use of expensive equipment to precisely position and focus a laser. The photolithography/etching process is time-consuming. The present process is a variant of the direct toner process an inexpensive but often highly effective process for patterning conductors for printed circuits. Relative to a conventional photolithography/ etching process, this process is simpler, takes less time, and is less expensive. This process involves equipment that costs less than $500 (at 2005 prices) and enables patterning of an ITO film in a process time of less than about a half hour.

16 CFR 1051.10 - Granting petitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Granting petitions. 1051.10 Section 1051.10... § 1051.10 Granting petitions. (a) The Commission shall either grant or deny a petition within a reasonable time after it is filed, taking into account the resources available for processing the petition...

Teachers' Learning in School-Based Development

ERIC Educational Resources Information Center

Postholm, May Britt; Waege, Kjersti

2016-01-01

Background and purpose: Many researchers agree that teachers' learning processes are social and that teachers need to be brought together to learn from each other. Researchers have also stated that intellectual and pedagogical change requires professional development activities that take place over a period of time in school. The purpose of the…

Matrix Wings: Continuous Process Improvement an Operator Can Love

DTIC Science & Technology

2016-09-01

could employ the principles in AFSO21 but preferably by em- ploying a version that does not take time away from mission preparation/execution and that...results, the DOD’s director of quality management sent a certified public accountant to Yokota to verify the claims. The CPA validated that

Understanding and Managing the Assessment Process

Treesearch

Gene Lessard; Scott Archer; John R. Probst; Sandra Clark

1999-01-01

Taking an ecological approach to management, or ecosystem management, is a developing approach for managing natural resources within the context of large geogaphic scales and over multiple time frames. Recently, the Council on Environmental Quality (CEQ) (IEMTF 1995) defined an ecosystem as "...an interconnected community of living things, including humans, and...

Exploring the Self

ERIC Educational Resources Information Center

Edwards, Laura

2009-01-01

Throughout life, people are faced with the challenge of defining all aspects of their being. Definitions of self can emerge by taking time to contemplate the meaning that saturates thoughts and actions. This process is essential for the unfolding of the future so a person does not become someone who wanders aimlessly through life. Self-awareness…

32 CFR 701.12 - FOIA appeals/litigation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... do not take effect until it is received by the right one. If, however, the time limit for responding... right of judicial remedy. Nonetheless, the appellate authority will continue to process the case... the official responsible for the denial and advise the requester of the right to seek judicial review...

Modelling of polymer photodegradation for solar cell modules

NASA Technical Reports Server (NTRS)

Guillet, J. E.

1982-01-01

A computer program which simulates the complex processes of photooxidation which take place in a polymer upon prolonged exposure outdoors causing it to fail in photovoltaic and other applications. The method calculates from an input data set of elementary reactions and rates the concentration profiles of all species over time.

Ice & Exercise for Injury Management.

ERIC Educational Resources Information Center

Suspenski, Thomas J.

Utilization of ice and exercise conjunctively decreases recovery time of muscle tendon injury considerably. In the healing process, collagen (a major element of scar formation) is laid down. If heat and rest are used as treatment, healing takes place; however, collagen is laid down in a haphazard arrangement increasing the likelihood of reinjury.…

Time to Take a Stand against Junk Food.

ERIC Educational Resources Information Center

Jacobsen, Michael

1993-01-01

Childhood obesity is a social and health problem that is encouraged by junk food ads and the easy availability of unhealthful fast foods. The article provides guidance for parents to encourage healthy eating by their children; it includes a list of resources and a list of "best" processed foods. (SM)

Putting Data to Work: Interim Recommendations from The Benchmarking Project

ERIC Educational Resources Information Center

Miles, Marty; Maguire, Sheila; Woodruff-Bolte, Stacy; Clymer, Carol

2010-01-01

As public and private funders have focused on evaluating the effectiveness of workforce development programs, a myriad of data collection systems and reporting processes have taken shape. Navigating these systems takes significant time and energy and often saps frontline providers' capacity to use data internally for program improvement.…

77 FR 74876 - Agency Information Collection Activities; Existing Collection, Comments Requested; Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... Office of Management and Budget, Office of Information and Regulatory Affairs, Attention Department of... 3,000 enrollments per year. The average response time for reading the directions for the Federal... = 100 hours. The entire process of reading the letter and completing both forms would take 15 minutes...

NORSAR Detection Processing System.

DTIC Science & Technology

1987-05-31

systems have been reliable. NTA/Lillestrom and Hamar will take a new initiative medio April regarding 04C. The line will be remeasured and if a certain...estimate of the ambient noise level at the site of the FINESA array, ground motion spectra were calculated for four time intervals. Two intervals were

Virtual Bioinformatics Distance Learning Suite

ERIC Educational Resources Information Center

Tolvanen, Martti; Vihinen, Mauno

2004-01-01

Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…

Concessions for Survival

ERIC Educational Resources Information Center

Sharp, Malcolm

1973-01-01

Discusses the threat of a race for first-strike capacity as a factor influencing the achievement of world disarmament. Indicates that the process of graduated unilateral disarmament'' would be better than that of first-strike capacity by leaving enough time for one side to take comparable action after completion of disarmament efforts by the…

Time-delayed reaction-diffusion fronts

NASA Astrophysics Data System (ADS)

Isern, Neus; Fort, Joaquim

2009-11-01

A time-delayed second-order approximation for the front speed in reaction-dispersion systems was obtained by Fort and Méndez [Phys. Rev. Lett. 82, 867 (1999)]. Here we show that taking proper care of the effect of the time delay on the reactive process yields a different evolution equation and, therefore, an alternate equation for the front speed. We apply the new equation to the Neolithic transition. For this application the new equation yields speeds about 10% slower than the previous one.

Extending the Query Language of a Data Warehouse for Patient Recruitment.

PubMed

Dietrich, Georg; Ertl, Maximilian; Fette, Georg; Kaspar, Mathias; Krebs, Jonathan; Mackenrodt, Daniel; Störk, Stefan; Puppe, Frank

2017-01-01

Patient recruitment for clinical trials is a laborious task, as many texts have to be screened. Usually, this work is done manually and takes a lot of time. We have developed a system that automates the screening process. Besides standard keyword queries, the query language supports extraction of numbers, time-spans and negations. In a feasibility study for patient recruitment from a stroke unit with 40 patients, we achieved encouraging extraction rates above 95% for numbers and negations and ca. 86% for time spans.

The Evidential Basis of Decision Making in Plant Disease Management.

PubMed

Hughes, Gareth

2017-08-04

The evidential basis for disease management decision making is provided by data relating to risk factors. The decision process involves an assessment of the evidence leading to taking (or refraining from) action on the basis of a prediction. The primary objective of the decision process is to identify-at the time the decision is made-the control action that provides the best predicted end-of-season outcome, calculated in terms of revenue or another appropriate metric. Data relating to disease risk factors may take a variety of forms (e.g., continuous, discrete, categorical) on measurement scales in a variety of units. Log 10 -likelihood ratios provide a principled basis for the accumulation of evidence based on such data and allow predictions to be made via Bayesian updating of prior probabilities.

But is helping you worth the risk? Defining Prosocial Risk Taking in adolescence

PubMed Central

Do, Kathy T.; Guassi Moreira, João F.; Telzer, Eva H.

2017-01-01

Recent work has shown that the same neural circuitry that typically underlies risky behaviors also contributes to prosocial behaviors. Despite the striking overlap between two seemingly distinct behavioral patterns, little is known about how risk taking and prosociality interact and inform adolescent decision making. We review literature on adolescent brain development as it pertains to risk taking and prosociality and propose a new area of study, Prosocial Risk Taking, which suggests that adolescents can make risky decisions with the intention of helping other individuals. Given key socialization processes and ongoing neurodevelopmental changes during this time, adolescence may represent a sensitive period for the emergence of Prosocial Risk Taking, especially within a wide variety of social contexts when youth’s increased sensitivity to social evaluation and belonging impacts their behaviors. Prosocial Risk Taking in adolescence is an area of study that has been overlooked in the literature, but could help explain how ontogenetic changes in the adolescent brain may create not only vulnerabilities, but also opportunities for healthy prosocial development. PMID:28063823

Stability of continuous-time quantum filters with measurement imperfections

NASA Astrophysics Data System (ADS)

Amini, H.; Pellegrini, C.; Rouchon, P.

2014-07-01

The fidelity between the state of a continuously observed quantum system and the state of its associated quantum filter, is shown to be always a submartingale. The observed system is assumed to be governed by a continuous-time Stochastic Master Equation (SME), driven simultaneously by Wiener and Poisson processes and that takes into account incompleteness and errors in measurements. This stability result is the continuous-time counterpart of a similar stability result already established for discrete-time quantum systems and where the measurement imperfections are modelled by a left stochastic matrix.

Archival Automatic Identification System (AIS) Data for Navigation Project Performance Evaluation

DTIC Science & Technology

2015-08-01

presently provided through the USCG online request form, also via the Navigation Center website. As these requests are processed manually by USCG personnel...this process typically takes anywhere from several days to weeks depending on the number of pending requests, and care should be taken to ensure...identify the time- stamped latitude and longitude , heading, course over ground, speed over ground, and rate of turn of the vessels broadcasting the

Using New Technologies: A Technology Transfer Guidebook. Version 02.00. 08

DTIC Science & Technology

1993-12-01

Barton (1990) and Pressman (1992), depend on the concept that improving your overall technology transfer process decreases the amount of time it takes to...Evolutionary Spiral Process Any enactment of the evolutionary spiral model (ESP) which is an adaptation of the basic spiral model pro- posed by Barry Boehm...Innovations in Organizations, 1989 CMU/SEI-89-TR-17, (also NTIS ADA211573). Pittsburgh, Pennsylvania: Software Engineering Institute. Boehm, Barry A

Environmental Science: Processes & Impacts in 2018.

PubMed

2018-02-21

2017 was another successful year for Environmental Science: Processes & Impacts (ESPI); it saw the expansion of our Editorial team and publication of two excellent Themed Issues, all while maintaining our commitment to provide our authors with exceptional customer service and fast times to publication. Through this Editorial, we wish to reflect upon some of the highlights from 2017 and also take this opportunity to reveal further new additions to the ESPI team and our plans for 2018.

Time-Frequency Representations for Speech Signals.

DTIC Science & Technology

1987-06-01

and subsequent processing can take these weights into account . This is, in principle , safer, but pratically it is much harder to think about processing...and frequency along the other. But how should this idea be made precise (the well-known uncertainty principle of fourier analysis is one of the thorny...produce similar results. q2.3. Non-stationarity 19 it is the unique shape that meets the uncertainty principle with equality. 2.2. The quasi-stationary

Accelerating Molecular Dynamic Simulation on Graphics Processing Units

PubMed Central

Friedrichs, Mark S.; Eastman, Peter; Vaidyanathan, Vishal; Houston, Mike; Legrand, Scott; Beberg, Adam L.; Ensign, Daniel L.; Bruns, Christopher M.; Pande, Vijay S.

2009-01-01

We describe a complete implementation of all-atom protein molecular dynamics running entirely on a graphics processing unit (GPU), including all standard force field terms, integration, constraints, and implicit solvent. We discuss the design of our algorithms and important optimizations needed to fully take advantage of a GPU. We evaluate its performance, and show that it can be more than 700 times faster than a conventional implementation running on a single CPU core. PMID:19191337

Understanding Randomness and its Impact on Student Learning: Lessons Learned from Building the Biology Concept Inventory (BCI)

PubMed Central

Garvin-Doxas, Kathy

2008-01-01

While researching student assumptions for the development of the Biology Concept Inventory (BCI; http://bioliteracy.net), we found that a wide class of student difficulties in molecular and evolutionary biology appears to be based on deep-seated, and often unaddressed, misconceptions about random processes. Data were based on more than 500 open-ended (primarily) college student responses, submitted online and analyzed through our Ed's Tools system, together with 28 thematic and think-aloud interviews with students, and the responses of students in introductory and advanced courses to questions on the BCI. Students believe that random processes are inefficient, whereas biological systems are very efficient. They are therefore quick to propose their own rational explanations for various processes, from diffusion to evolution. These rational explanations almost always make recourse to a driver, e.g., natural selection in evolution or concentration gradients in molecular biology, with the process taking place only when the driver is present, and ceasing when the driver is absent. For example, most students believe that diffusion only takes place when there is a concentration gradient, and that the mutational processes that change organisms occur only in response to natural selection pressures. An understanding that random processes take place all the time and can give rise to complex and often counterintuitive behaviors is almost totally absent. Even students who have had advanced or college physics, and can discuss diffusion correctly in that context, cannot make the transfer to biological processes, and passing through multiple conventional biology courses appears to have little effect on their underlying beliefs. PMID:18519614

Taking it to the streets: delivering on deployment.

PubMed

Carr, Dafna; Welch, Vickie; Fabik, Trish; Hirji, Nadir; O'Connor, Casey

2009-01-01

From inception to deployment, the Wait Time Information System (WTIS) project faced significant challenges associated with time, scope and complexity. It involved not only the creation and deployment of two large-scale province-wide systems (the WTIS and Ontario's Client Registry/Enterprise Master Patient Index) within aggressive time frames, but also the active engagement of 82 Ontario hospitals, scores of healthcare leaders and several thousand clinicians who would eventually be using the new technology and its data. The provincial WTIS project team (see Figure 1) also had to be able to adapt and evolve their planning in an environment that was changing day-by-day. This article looks at the factors that allowed the team to take the WTIS out to the field and shares the approach, processes and tools used to deploy this complex and ambitious information management and information technology (IM/IT) initiative.

Trace element differences between Archean, Proterozoic and Phanerozoic crustal components: Implications for crustal growth processes

NASA Technical Reports Server (NTRS)

Tarney, J.; Wyborn, L. E. A.; Sheraton, J. W.; Wyborn, D.

1988-01-01

Critical to models for continental crust growth and recycling are the processes through which crustal growth takes place. In particular, it is important to know whether these processes have changed fundamentally with time in response to the earth's thermal evolution, and whether the crustal compositions generated are compatible with crustal remobilization, crustal recycling, or represent primary additions. There are some significant and consistent differences in the major and trace element compositions of crustal components with time which have important implications for crustal growth processes. These will be illustrated with reference to Archean rocks from a number of shield areas, Proterozoic granitoids from Australia and elsewhere, Palaeozoic granitoids from Australia and Scotland, and Mesozoic - recent granitoids from present continental margin belts. Surprisingly some rather simple and consistent patterns energy using this technique. There are then significant differences in compositions of granitoid crustal additions throughout geological time, with a particular type of granitoid apparently dominating a particular time period. This implies that the tectonic processes giving rise to granite generation have changed in response to the earth's thermal evolution.

Recovery of speed of information processing in closed-head-injury patients.

PubMed

Zwaagstra, R; Schmidt, I; Vanier, M

1996-06-01

After severe traumatic brain injury, patients almost invariably demonstrate a slowing of reaction time, reflecting a slowing of central information processing. Methodological problems associated with the traditional method for the analysis of longitudinal data (MANOVA) severely complicate studies on cognitive recovery. It is argued that multilevel models are often better suited for the analysis of improvement over time in clinical settings. Multilevel models take into account individual differences in both overall performance level and recovery. These models enable individual predictions for the recovery of speed of information processing. Recovery is modelled in a group of closed-head-injury patients (N = 24). Recovery was predicted by age and severity of injury, as indicated by coma duration. Over a period up to 44 months post trauma, reaction times were found to decrease faster for patients with longer coma duration.

Optimized delivery radiological reports: applying Six Sigma methodology to a radiology department.

PubMed

Cavagna, Enrico; Berletti, Riccardo; Schiavon, Francesco; Scarsi, Barbara; Barbato, Giuseppe

2003-03-01

To optimise the process of reporting and delivering radiological examinations with a view to achieving 100% service delivery within 72 hours to outpatients and 36 hours to inpatients. To this end, we used the Six Sigma method which adopts a systematic approach and rigorous statistical analysis to analyse and improve processes, by reducing variability and minimising errors. More specifically, our study focused on the process of radiological report creation, from the end of the examination to the time when the report is made available to the patient, to examine the bottlenecks and identify the measures to be taken to improve the process. Six Sigma uses a five-step problem-solving process called DMAIC, an acronym for Define, Measure, Analyze, Improve and Control. The first step is to define the problem and the elements crucial to quality, in terms of Total Quality Control. Next, the situation is analysed to identify the root causes of the problem and determine which of these is most influential. The situation is then improved by implementing change. Finally, to make sure that the change is long-lasting, measures are taken to sustain the improvements and obtain long-term control. In our case we analysed all of the phases the report passes through before reaching the user, and studied the impact of voice-recognition reporting on the speed of the report creation process. Analysis of the information collected showed that the tools available for report creation (dictaphone, voice-recognition system) and the transport of films and reports were the two critical elements on which to focus our efforts. Of all the phases making up the process, reporting (from end of examination to end of reporting) and distribution (from the report available to administrative staff to report available to the patient) account for 90% of process variability (73% and 17%, respectively). We further found that the reports dictated into a voice-recognition reporting system are delivered in 45 hours (median), whereas those dictated using a dictaphone take 96 hours: voice-recognition reporting systems therefore improve performance by 50 hours. Unfortunately, 38% of our reports are delivered within longer timeframes than the 72h for outpatients and 36h for inpatients agreed with the service users. Reports for inpatients have much faster delivery times and lower variability, as 95% of these examinations are reported using voice-recognition reporting (as a result of the greater sensitivity of physicians to the problem of inpatient waiting times). For conventional radiology examinations, numerically greater than CT or MRI, there is a stronger tendency to use the dictaphone which allows for faster dictation as it is unburdened by administrative tasks such as entering examination codes, correcting errors, etc. Freelance status has no impact on report delivery times, service delivery being the same as in the institutional setting. The subprocess of reporting is strongly affected by the choice of reporting method (voice-recognition system or dictaphone), whereas report delivery is affected by the individual's behaviour patterns and ultimately by habits generated by the lack of a clearly charted process (lack of synchronisation among the various phases), and therefore potentially avoidable. The analytical study of the various phases of examination reporting, from writing to delivery, allowed us to identify the process bottlenecks and take corrective measures. Regardless of imaging modality and individual physician, examination reporting consistently takes longer when a dictaphone is used instead of a voice-recognition reporting system, as this makes the process more complex. To improve the two critical subprocesses whilst maintaining constant resources, a first step is to abandon the dictaphone in favour of the voice-recognition system. In addition, we are experimenting other measures to improve the collection and sorting of examinations and the delivery of reports: the technical staff take the films from the examination rooms to the reporting rooms three times a day; the radiologists collect their examinations and prepare the reports, possibly on the same day; the radiologists leave their signed reports on the table in the central reporting room; the administrative staff collect the signed reports three times a day in the morning and afternoon to be able to deliver them on the same day. This project has allowed us to become familiar with the principles of total quality, to better understand our internal processes and to take effective measures to optimise them. This has resulted in enhanced satisfaction of all the department staff and has laid the grounds for further measures in the future.

General bulk service queueing system with N-policy, multiplevacations, setup time and server breakdown without interruption

NASA Astrophysics Data System (ADS)

Sasikala, S.; Indhira, K.; Chandrasekaran, V. M.

2017-11-01

In this paper, we have considered an MX / (a,b) / 1 queueing system with server breakdown without interruption, multiple vacations, setup times and N-policy. After a batch of service, if the size of the queue is ξ (< a), then the server immediately takes a vacation. Upon returns from a vacation, if the queue is less than N, then the server takes another vacation. This process continues until the server finds atleast N customers in the queue. After a vacation, if the server finds at least N customers waiting for service, then the server needs a setup time to start the service. After a batch of service, if the amount of waiting customers in the queue is ξ (≥ a) then the server serves a batch of min(ξ,b) customers, where b ≥ a. We derived the probability generating function of queue length at arbitrary time epoch. Further, we obtained some important performance measures.

Size dependent fragmentation of argon clusters in the soft x-ray ionization regime

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gisselbrecht, Mathieu; Lindgren, Andreas; Burmeister, Florian

Photofragmentation of argon clusters of average size ranging from 10 up to 1000 atoms is studied using soft x-ray radiation below the 2p threshold and multicoincidence mass spectroscopy technique. For small clusters (=10), ionization induces fast fragmentation with neutral emission imparting a large amount of energy. While the primary dissociation takes place on a picosecond time scale, the fragments undergo slow degradation in the spectrometer on a microsecond time scale. For larger clusters ({>=}100) we believe that we observe the fragmentation pattern of multiply charged species on a time-scale which lasts a few hundred nanoseconds. The reason for these slowermore » processes is the large number of neutral atoms which act as an efficient cooling bath where the excess energy ('heat') dissipates among all degrees of freedom. Further degradation of the photoionic cluster in spectrometer then takes place on the microsecond time scale, similar to small clusters.« less

Magnetic-field-induced crossover from the inverse Faraday effect to the optical orientation in EuTe

NASA Astrophysics Data System (ADS)

Pavlov, V. V.; Pisarev, R. V.; Nefedov, S. G.; Akimov, I. A.; Yakovlev, D. R.; Bayer, M.; Henriques, A. B.; Rappl, P. H. O.; Abramof, E.

2018-05-01

A time-resolved optical pump-probe technique has been applied for studying the ultrafast dynamics in the magnetic semiconductor EuTe near the absorption band gap. We show that application of external magnetic field up to 6 T results in crossover from the inverse Faraday effect taking place on the femtosecond time scale to the optical orientation phenomenon with an evolution in the picosecond time domain. We propose a model which includes both these processes, possessing different spectral and temporal properties. The circularly polarized optical pumping induces the electronic transition 4 f 7 5 d 0 → 4 f 6 5 d 1 forming the absorption band gap in EuTe. The observed crossover is related to a strong magnetic-field shift of the band gap in EuTe at low temperatures. It was found that manipulation of spin states on intrinsic defect levels takes place on a time scale of 19 ps in the applied magnetic field of 6 T.

Characteristic time scales for diffusion processes through layers and across interfaces

NASA Astrophysics Data System (ADS)

Carr, Elliot J.

2018-04-01

This paper presents a simple tool for characterizing the time scale for continuum diffusion processes through layered heterogeneous media. This mathematical problem is motivated by several practical applications such as heat transport in composite materials, flow in layered aquifers, and drug diffusion through the layers of the skin. In such processes, the physical properties of the medium vary across layers and internal boundary conditions apply at the interfaces between adjacent layers. To characterize the time scale, we use the concept of mean action time, which provides the mean time scale at each position in the medium by utilizing the fact that the transition of the transient solution of the underlying partial differential equation model, from initial state to steady state, can be represented as a cumulative distribution function of time. Using this concept, we define the characteristic time scale for a multilayer diffusion process as the maximum value of the mean action time across the layered medium. For given initial conditions and internal and external boundary conditions, this approach leads to simple algebraic expressions for characterizing the time scale that depend on the physical and geometrical properties of the medium, such as the diffusivities and lengths of the layers. Numerical examples demonstrate that these expressions provide useful insight into explaining how the parameters in the model affect the time it takes for a multilayer diffusion process to reach steady state.

Characteristic time scales for diffusion processes through layers and across interfaces.

PubMed

Carr, Elliot J

2018-04-01

This paper presents a simple tool for characterizing the time scale for continuum diffusion processes through layered heterogeneous media. This mathematical problem is motivated by several practical applications such as heat transport in composite materials, flow in layered aquifers, and drug diffusion through the layers of the skin. In such processes, the physical properties of the medium vary across layers and internal boundary conditions apply at the interfaces between adjacent layers. To characterize the time scale, we use the concept of mean action time, which provides the mean time scale at each position in the medium by utilizing the fact that the transition of the transient solution of the underlying partial differential equation model, from initial state to steady state, can be represented as a cumulative distribution function of time. Using this concept, we define the characteristic time scale for a multilayer diffusion process as the maximum value of the mean action time across the layered medium. For given initial conditions and internal and external boundary conditions, this approach leads to simple algebraic expressions for characterizing the time scale that depend on the physical and geometrical properties of the medium, such as the diffusivities and lengths of the layers. Numerical examples demonstrate that these expressions provide useful insight into explaining how the parameters in the model affect the time it takes for a multilayer diffusion process to reach steady state.

Boeing's CST-100 Starliner Test Flight Vehicle Powers on for the

NASA Image and Video Library

2017-04-06

An engineer monitors a Boeing CST-100 Starliner spacecraft inside Boeing's Commercial Crew and Cargo Processing Facility at NASA's Kennedy Space Center in Florida. This was the first time "Spacecraft 1," as the individual Starliner is known, was powered up. It is being assembled for use during a pad abort test that will demonstrate the Starliners' ability to lift astronauts out of danger in the unlikely event of an emergency. Later flight tests will demonstrate Starliners in orbital missions to the station without a crew, and then with astronauts aboard. The flight tests will preview the crew rotation missions future Starliners will perform as they take up to four astronauts at a time to the orbiting laboratory in order to enhance the research taking place there

Boeing's CST-100 Starliner Test Flight Vehicle Powers on for the

NASA Image and Video Library

2017-04-06

An engineer works the switch to power on a Boeing CST-100 Starliner spacecraft inside Boeing's Commercial Crew and Cargo Processing Facility at NASA's Kennedy Space Center in Florida. This was the first time "Spacecraft 1," as the individual Starliner is known, was powered up. It is being assembled for use during a pad abort test that will demonstrate the Starliners' ability to lift astronauts out of danger in the unlikely event of an emergency. Later flight tests will demonstrate Starliners in orbital missions to the station without a crew, and then with astronauts aboard. The flight tests will preview the crew rotation missions future Starliners will perform as they take up to four astronauts at a time to the orbiting laboratory in order to enhance the research taking place there.

Rapid visual grouping and figure-ground processing using temporally structured displays.

PubMed

Cheadle, Samuel; Usher, Marius; Müller, Hermann J

2010-08-23

We examine the time course of visual grouping and figure-ground processing. Figure (contour) and ground (random-texture) elements were flickered with different phases (i.e., contour and background are alternated), requiring the observer to group information within a pre-specified time window. It was found this grouping has a high temporal resolution: less than 20ms for smooth contours, and less than 50ms for line conjunctions with sharp angles. Furthermore, the grouping process takes place without an explicit knowledge of the phase of the elements, and it requires a cumulative build-up of information. The results are discussed in relation to the neural mechanism for visual grouping and figure-ground segregation. Copyright 2010 Elsevier Ltd. All rights reserved.

Status quo and future research challenges on organic food quality determination with focus on laboratory methods.

PubMed

Kahl, Johannes; Bodroza-Solarov, Marija; Busscher, Nicolaas; Hajslova, Jana; Kneifel, Wolfgang; Kokornaczyk, Maria Olga; van Ruth, Saskia; Schulzova, Vera; Stolz, Peter

2014-10-01

Organic food quality determination needs multi-dimensional evaluation tools. The main focus is on the authentication as an analytical verification of the certification process. New fingerprinting approaches such as ultra-performance liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, direct analysis in real time-high-resolution mass spectrometry as well as crystallization with and without the presence of additives seem to be promising methods in terms of time of analysis and detecting organic system-related parameters. For further methodological development, a system approach is recommended, which also takes into account food structure aspects. Furthermore, the authentication of processed organic samples needs more consciousness, hence most of organic food is complex and processed. © 2013 Society of Chemical Industry.

Consolidation of lunar regolith: Microwave versus direct solar heating

NASA Technical Reports Server (NTRS)

Kunitzer, J.; Strenski, D. G.; Yankee, S. J.; Pletka, B. J.

1991-01-01

The production of construction materials on the lunar surface will require an appropriate fabrication technique. Two processing methods considered as being suitable for producing dense, consolidated products such as bricks are direct solar heating and microwave heating. An analysis was performed to compare the two processes in terms of the amount of power and time required to fabricate bricks of various size. The regolith was considered to be a mare basalt with an overall density of 60 pct. of theoretical. Densification was assumed to take place by vitrification since this process requires moderate amounts of energy and time while still producing dense products. Microwave heating was shown to be significantly faster compared to solar furnace heating for rapid production of realistic-size bricks.

Is Electronic Life-Cycle Tracking of Aircraft Parts Degrading Readiness?

DTIC Science & Technology

2013-12-04

approximately how many times has this happened in the last 6 months ? a. _____________________________ 3. How much time does it take to remedy the missing...and encouragement throughout this endeavor. Although I was regrettably focused more on this project than on them for several months , they always...focused on the collection of data used to determine the variation within a process. During this step, team leaders determine the type of data that

Photon energy lifter.

PubMed

Gaburro, Zeno; Ghulinyan, Mher; Riboli, Francesco; Pavesi, Lorenzo; Recati, Alessio; Carusotto, Iacopo

2006-08-07

We propose a time-dependent, spatially periodic photonic structure which is able to shift the carrier frequency of an optical pulse which propagates through it. Taking advantage of the slow group velocity of light in periodic photonic structures, the wavelength conversion process can be performed with an efficiency close to 1 and without affecting the shape and the coherence of the pulse. Quantitative Finite Difference Time Domain simulations are performed for realistic systems with optical parameters of conventional silicon technology.

A multiscale forecasting method for power plant fleet management

NASA Astrophysics Data System (ADS)

Chen, Hongmei

In recent years the electric power industry has been challenged by a high level of uncertainty and volatility brought on by deregulation and globalization. A power producer must minimize the life cycle cost while meeting stringent safety and regulatory requirements and fulfilling customer demand for high reliability. Therefore, to achieve true system excellence, a more sophisticated system-level decision-making process with a more accurate forecasting support system to manage diverse and often widely dispersed generation units as a single, easily scaled and deployed fleet system in order to fully utilize the critical assets of a power producer has been created as a response. The process takes into account the time horizon for each of the major decision actions taken in a power plant and develops methods for information sharing between them. These decisions are highly interrelated and no optimal operation can be achieved without sharing information in the overall process. The process includes a forecasting system to provide information for planning for uncertainty. A new forecasting method is proposed, which utilizes a synergy of several modeling techniques properly combined at different time-scales of the forecasting objects. It can not only take advantages of the abundant historical data but also take into account the impact of pertinent driving forces from the external business environment to achieve more accurate forecasting results. Then block bootstrap is utilized to measure the bias in the estimate of the expected life cycle cost which will actually be needed to drive the business for a power plant in the long run. Finally, scenario analysis is used to provide a composite picture of future developments for decision making or strategic planning. The decision-making process is applied to a typical power producer chosen to represent challenging customer demand during high-demand periods. The process enhances system excellence by providing more accurate market information, evaluating the impact of external business environment, and considering cross-scale interactions between decision actions. Along with this process, system operation strategies, maintenance schedules, and capacity expansion plans that guide the operation of the power plant are optimally identified, and the total life cycle costs are estimated.

New insights into the interface between a single-crystalline metal electrode and an extremely pure ionic liquid: slow interfacial processes and the influence of temperature on interfacial dynamics.

PubMed

Drüschler, Marcel; Borisenko, Natalia; Wallauer, Jens; Winter, Christian; Huber, Benedikt; Endres, Frank; Roling, Bernhard

2012-04-21

Ionic liquids are of high interest for the development of safe electrolytes in modern electrochemical cells, such as batteries, supercapacitors and dye-sensitised solar cells. However, electrochemical applications of ionic liquids are still hindered by the limited understanding of the interface between electrode materials and ionic liquids. In this article, we first review the state of the art in both experiment and theory. Then we illustrate some general trends by taking the interface between the extremely pure ionic liquid 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate and an Au(111) electrode as an example. For the study of this interface, electrochemical impedance spectroscopy was combined with in situ STM and in situ AFM techniques. In addition, we present new results for the temperature dependence of the interfacial capacitance and dynamics. Since the interfacial dynamics are characterised by different processes taking place on different time scales, the temperature dependence of the dynamics can only be reliably studied by recording and carefully analysing broadband capacitance spectra. Single-frequency experiments may lead to artefacts in the temperature dependence of the interfacial capacitance. We demonstrate that the fast capacitive process exhibits a Vogel-Fulcher-Tamman temperature dependence, since its time scale is governed by the ionic conductivity of the ionic liquid. In contrast, the slower capacitive process appears to be Arrhenius activated. This suggests that the time scale of this process is determined by a temperature-independent barrier, which may be related to structural reorganisations of the Au surface and/or to charge redistributions in the strongly bound innermost ion layer. This journal is © the Owner Societies 2012

Distraction or cognitive overload? Using modulations of the autonomic nervous system to discriminate the possible negative effects of advanced assistance system.

PubMed

Ruscio, D; Bos, A J; Ciceri, M R

2017-06-01

The interaction with Advanced Driver Assistance Systems has several positive implications for road safety, but also some potential downsides such as mental workload and automation complacency. Malleable attentional resources allocation theory describes two possible processes that can generate workload in interaction with advanced assisting devices. The purpose of the present study is to determine if specific analysis of the different modalities of autonomic control of nervous system can be used to discriminate different potential workload processes generated during assisted-driving tasks and automation complacency situations. Thirty-five drivers were tested in a virtual scenario while using head-up advanced warning assistance system. Repeated MANOVA were used to examine changes in autonomic activity across a combination of different user interactions generated by the advanced assistance system: (1) expected take-over request without anticipatory warning; (2) expected take-over request with two-second anticipatory warning; (3) unexpected take-over request with misleading warning; (4) unexpected take-over request without warning. Results shows that analysis of autonomic modulations can discriminate two different resources allocation processes, related to different behavioral performances. The user's interaction that required divided attention under expected situations produced performance enhancement and reciprocally-coupled parasympathetic inhibition with sympathetic activity. At the same time, supervising interactions that generated automation complacency were described specifically by uncoupled sympathetic activation. Safety implications for automated assistance systems developments are considered. Copyright © 2017 Elsevier Ltd. All rights reserved.

Computational Process Modeling for Additive Manufacturing (OSU)

NASA Technical Reports Server (NTRS)

Bagg, Stacey; Zhang, Wei

2015-01-01

Powder-Bed Additive Manufacturing (AM) through Direct Metal Laser Sintering (DMLS) or Selective Laser Melting (SLM) is being used by NASA and the Aerospace industry to "print" parts that traditionally are very complex, high cost, or long schedule lead items. The process spreads a thin layer of metal powder over a build platform, then melts the powder in a series of welds in a desired shape. The next layer of powder is applied, and the process is repeated until layer-by-layer, a very complex part can be built. This reduces cost and schedule by eliminating very complex tooling and processes traditionally used in aerospace component manufacturing. To use the process to print end-use items, NASA seeks to understand SLM material well enough to develop a method of qualifying parts for space flight operation. Traditionally, a new material process takes many years and high investment to generate statistical databases and experiential knowledge, but computational modeling can truncate the schedule and cost -many experiments can be run quickly in a model, which would take years and a high material cost to run empirically. This project seeks to optimize material build parameters with reduced time and cost through modeling.

Electrochemical impedance spectroscopy of supercapacitors: A novel analysis approach using evolutionary programming

NASA Astrophysics Data System (ADS)

Oz, Alon; Hershkovitz, Shany; Tsur, Yoed

2014-11-01

In this contribution we present a novel approach to analyze impedance spectroscopy measurements of supercapacitors. Transforming the impedance data into frequency-dependent capacitance allows us to use Impedance Spectroscopy Genetic Programming (ISGP) in order to find the distribution function of relaxation times (DFRT) of the processes taking place in the tested device. Synthetic data was generated in order to demonstrate this technique and a model for supercapacitor ageing process has been obtained.

Obstacles to the Termination of Air Force Activities.

DTIC Science & Technology

1986-04-01

sugsts how. it the Air Force leadership con- eludes that termination is necessary the Air Force can surmount the obstacles.’ The stud v was cMIduct ed...the Air Force leadership concludes that the termination of a major activity is a promising or necessary management option, the report suggests that it...complicated inter- nal political process; it takes time to work out. The top leadership should begin the process of corporate strategy building and priority

Multivariable Time Series Prediction for the Icing Process on Overhead Power Transmission Line

PubMed Central

Li, Peng; Zhao, Na; Zhou, Donghua; Cao, Min; Li, Jingjie; Shi, Xinling

2014-01-01

The design of monitoring and predictive alarm systems is necessary for successful overhead power transmission line icing. Given the characteristics of complexity, nonlinearity, and fitfulness in the line icing process, a model based on a multivariable time series is presented here to predict the icing load of a transmission line. In this model, the time effects of micrometeorology parameters for the icing process have been analyzed. The phase-space reconstruction theory and machine learning method were then applied to establish the prediction model, which fully utilized the history of multivariable time series data in local monitoring systems to represent the mapping relationship between icing load and micrometeorology factors. Relevant to the characteristic of fitfulness in line icing, the simulations were carried out during the same icing process or different process to test the model's prediction precision and robustness. According to the simulation results for the Tao-Luo-Xiong Transmission Line, this model demonstrates a good accuracy of prediction in different process, if the prediction length is less than two hours, and would be helpful for power grid departments when deciding to take action in advance to address potential icing disasters. PMID:25136653

[Studies on the extraction and purification of total saponins from Parched Semen Ziziphi Spinosae].

PubMed

Wu, Yulan; Ding, Anwei; Bao, Beihua

2005-03-01

To study the extraction and purification process of the total saponin from Parched Semen Ziziphi Spinosae with ethanol and macroporous resin. The total saponins were extracted with ethanol and purified with macroporous resin by orthogonal design, taking content and purity of jujuboside A as guideline. The optimum extraction condition was adding 6 times amount of 80% ethanol and refluxing 3 times, for 30 minutes each time. The purification process with macroporous resin HPD-100 was using 0.5% NaOH (150ml), 30% ethanol (150ml) to wash out impurity, and 70% ethanol 50 ml to wash out saponin. The purity of jujuboside A was up to 17.9% and the eluted ratio 72.8%.

Multiscale analysis of the intensity fluctuation in a time series of dynamic speckle patterns.

PubMed

Federico, Alejandro; Kaufmann, Guillermo H

2007-04-10

We propose the application of a method based on the discrete wavelet transform to detect, identify, and measure scaling behavior in dynamic speckle. The multiscale phenomena presented by a sample and displayed by its speckle activity are analyzed by processing the time series of dynamic speckle patterns. The scaling analysis is applied to the temporal fluctuation of the speckle intensity and also to the two derived data sets generated by its magnitude and sign. The application of the method is illustrated by analyzing paint-drying processes and bruising in apples. The results are discussed taking into account the different time organizations obtained for the scaling behavior of the magnitude and the sign of the intensity fluctuation.

Learning Approaches of Undergraduate Computer Technology Students: Strategies for Improvement

ERIC Educational Resources Information Center

Malakolunthu, Suseela; Joshua, Alice

2012-01-01

Purpose: In recent times, quality of graduates and their performance has been questioned. Students' performance is an indicator of the kind of approach (deep or surface) that is taken. This study investigates the kind of undergraduates take in their learning processes. Methodology: This quantitative survey used Revised Two-Factor Study Process…

Adult Education and European Identity

ERIC Educational Resources Information Center

Negt, Oskar

2008-01-01

Europe is coming together. This is a historic project; for the first time in modern history, will and consciousness are used for bringing political, social and cultural unity to the European continent. In this process lifelong learning and hence adult education are gaining in importance. The European project takes place in an age characterised by…

AP Courses Get Audited for Quality

ERIC Educational Resources Information Center

Ashford, Ellie

2007-01-01

As the college admissions process has gotten much more competitive, the number of high school students taking Advanced Placement (AP) courses has soared. At the same time, policymakers and education leaders seek to get more minorities and students not on the college track to sign up for AP and other rigorous classes. But as high schools have…

Web-Based Walk-Throughs

ERIC Educational Resources Information Center

Granada, Janet; Vriesenga, Michael

2008-01-01

Walk-through classroom observations are an effective way for principals to learn about and shape instruction and culture in their schools. But many principals don't use walk-throughs to their potential because of the time it takes to store, process, analyze, and give feedback. To facilitate the use of this valuable observation tool, the Kentucky…

He Could Be Undocumented: Striving to Be Sensitive to Student Documentation Status in a Rural Community

ERIC Educational Resources Information Center

Crawford, Emily R.; Hairston, Sarah L.

2018-01-01

This case study takes place in a Midwestern, politically conservative rural community shortly after a highly contested presidential election. Like other communities, Paisano has experienced demographic change in a relatively short time. Meat processing plants and construction jobs proliferate, attracting migrant workers. One day, secondary school…

Successfully Serving the College Bound

ERIC Educational Resources Information Center

Hands, Africa S.

2015-01-01

Whether they are students taking the traditional path of entering college from high school, or adult first-time or re-entry students, navigating the admissions and financial aid process can be overwhelming for the college bound. Public libraries can help provide information and guidance for a successful start, and this book shows how to do it.…

New Roles for New Times: Digital Curation for Preservation

ERIC Educational Resources Information Center

Walters, Tyler; Skinner, Katherine

2011-01-01

Digital curation refers to the actions people take to maintain and add value to digital information over its lifecycle, including the processes used when creating digital content. Digital preservation focuses on the "series of managed activities necessary to ensure continued access to digital materials for as long as necessary." In this…

Does Taking Photographs Help?

ERIC Educational Resources Information Center

Hand, Sarah

2010-01-01

Since many people tend to use photographs as memory anchors, this author decided she wanted to know whether the process of capturing and manipulating an image taken during a learning activity would act as a memory anchor for children's visual, auditory and kinaesthetic memories linked to their cognitive learning at the time. In plain English,…

Kindergarten Transitions: How Pre-K Teachers Can Help. Program Services Paper.

ERIC Educational Resources Information Center

Amwake, Lynn

Noting that the transition to Kindergarten is a process rather than a one-time event, this guide will help early childhood educators--home caregivers, center providers and public preschool teachers--understand the transitions to school and consider steps teachers can take to improve children's transition and adjustment. Specific ideas and…

A Global Worldview among Extension Professionals: A Case Study of Best Practices for Study Abroad Programs

ERIC Educational Resources Information Center

Lockett, Landry; Moore, Lori; Wingenbach, Gary

2014-01-01

Globalization and diversifying communities in the United States mandate internationally minded Extension professionals and programming. The knowledge necessary for successfully working in international agricultural and Extension education is vast and takes time to acquire. A catalyst for this learning process is participation in university- or…

Supporting Children's Reading of Expository Text in the Geography Classroom

ERIC Educational Resources Information Center

Gregg, Madeleine; Sekeres, Diane Carver

2006-01-01

If children are to read to learn, they must acquire skill in processing and comprehending expository texts. However, teaching children to read and comprehend informational texts takes time, because there are so many complex skills associated with this reading. Building children's knowledge of the content to be studied and introducing new…

"My Job Now Is to Encourage"

ERIC Educational Resources Information Center

Stanistreet, Paul

2007-01-01

Six years ago Tony Benn left the House of Commons "to devote more time to politics." These days he sees himself as an "untrained classroom assistant to the nation," encouraging people to take charge of their own political destinies. Benn tells the author that education is a fundamental part of that process. Education, whether…

Early Boost and Slow Consolidation in Motor Skill Learning

ERIC Educational Resources Information Center

Hotermans, Christophe; Peigneux, Philippe; de Noordhout, Alain Maertens; Moonen, Gustave; Maquet, Pierre

2006-01-01

Motor skill learning is a dynamic process that continues covertly after training has ended and eventually leads to delayed increments in performance. Current theories suggest that this off-line improvement takes time and appears only after several hours. Here we show an early transient and short-lived boost in performance, emerging as early as…

Real time 3D structural and Doppler OCT imaging on graphics processing units

NASA Astrophysics Data System (ADS)

Sylwestrzak, Marcin; Szlag, Daniel; Szkulmowski, Maciej; Gorczyńska, Iwona; Bukowska, Danuta; Wojtkowski, Maciej; Targowski, Piotr

2013-03-01

In this report the application of graphics processing unit (GPU) programming for real-time 3D Fourier domain Optical Coherence Tomography (FdOCT) imaging with implementation of Doppler algorithms for visualization of the flows in capillary vessels is presented. Generally, the time of the data processing of the FdOCT data on the main processor of the computer (CPU) constitute a main limitation for real-time imaging. Employing additional algorithms, such as Doppler OCT analysis, makes this processing even more time consuming. Lately developed GPUs, which offers a very high computational power, give a solution to this problem. Taking advantages of them for massively parallel data processing, allow for real-time imaging in FdOCT. The presented software for structural and Doppler OCT allow for the whole processing with visualization of 2D data consisting of 2000 A-scans generated from 2048 pixels spectra with frame rate about 120 fps. The 3D imaging in the same mode of the volume data build of 220 × 100 A-scans is performed at a rate of about 8 frames per second. In this paper a software architecture, organization of the threads and optimization applied is shown. For illustration the screen shots recorded during real time imaging of the phantom (homogeneous water solution of Intralipid in glass capillary) and the human eye in-vivo is presented.

Unbiased total electron content (UTEC), their fluctuations, and correlation with seismic activity over Japan

NASA Astrophysics Data System (ADS)

Cornely, Pierre-Richard; Hughes, John

2018-02-01

Earthquakes are among the most dangerous events that occur on earth and many scientists have been investigating the underlying processes that take place before earthquakes occur. These investigations are fueling efforts towards developing both single and multiple parameter earthquake forecasting methods based on earthquake precursors. One potential earthquake precursor parameter that has received significant attention within the last few years is the ionospheric total electron content (TEC). Despite its growing popularity as an earthquake precursor, TEC has been under great scrutiny because of the underlying biases associated with the process of acquiring and processing TEC data. Future work in the field will need to demonstrate our ability to acquire TEC data with the least amount of biases possible thereby preserving the integrity of the data. This paper describes a process for removing biases using raw TEC data from the standard Rinex files obtained from any global positioning satellites system. The process is based on developing an unbiased TEC (UTEC) data and model that can be more adaptable to serving as a precursor signal for earthquake forecasting. The model was used during the days and hours leading to the earthquake off the coast of Tohoku, Japan on March 11, 2011 with interesting results. The model takes advantage of the large amount of data available from the GPS Earth Observation Network of Japan to display near real-time UTEC data as the earthquake approaches and for a period of time after the earthquake occurred.

Results from the Biology Concept Inventory (BCI), and what they mean for biogeoscience literacy.

NASA Astrophysics Data System (ADS)

Garvin-Doxas, K.; Klymkowsky, M.

2008-12-01

While researching the Biology Concept Inventory (BCI) we found that a wide class of student difficulties in genetics and molecular biology can be traced to deep-seated misconceptions about random processes and molecular interactions. Students believe that random processes are inefficient, while biological systems are very efficient, and are therefore quick to propose their own rational explanations for various processes (from diffusion to evolution). These rational explanations almost always make recourse to a driver (natural selection in genetics, or density gradients in molecular biology) with the process only taking place when the driver is present. The concept of underlying random processes that are taking place all the time giving rise to emergent behaviour is almost totally absent. Even students who have advanced or college physics, and can discuss diffusion correctly in that context, cannot make the transfer to biological processes. Furthermore, their understanding of molecular interactions is purely geometric, with a lock-and-key model (rather than an energy minimization model) that does not allow for the survival of slight variations of the "correct" molecule. Together with the dominant misconception about random processes, this results in a strong conceptual barrier in understanding evolutionary processes, and can frustrate the success of education programs.

Development of CVD Diamond for Industrial Applications Final Report CRADA No. TC-2047-02

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caplan, M.; Olstad, R.; Jory, H.

2017-09-08

This project was a collaborative effort to develop and demonstrate a new millimeter microwave assisted chemical vapor deposition(CVD) process for manufacturing large diamond disks with greatly reduced processing times and costs from those now available. In the CVD process, carbon based gases (methane) and hydrogen are dissociated into plasma using microwave discharge and then deposited layer by layer as polycrystalline diamond onto a substrate. The available low frequency (2.45GHz) microwave sources used elsewhere (De Beers) result in low density plasmas and low deposition rates: 4 inch diamond disks take 6-8 weeks to process. The new system developed in this projectmore » uses a high frequency 30GHz Gyrotron as the microwave source and a quasi-optical CVD chamber resulting in a much higher density plasma which greatly reduced the diamond processing times (1-2 weeks)« less

Resource Planning for Massive Number of Process Instances

NASA Astrophysics Data System (ADS)

Xu, Jiajie; Liu, Chengfei; Zhao, Xiaohui

Resource allocation has been recognised as an important topic for business process execution. In this paper, we focus on planning resources for a massive number of process instances to meet the process requirements and cater for rational utilisation of resources before execution. After a motivating example, we present a model for planning resources for process instances. Then we design a set of heuristic rules that take both optimised planning at build time and instance dependencies at run time into account. Based on these rules we propose two strategies, one is called holistic and the other is called batched, for resource planning. Both strategies target a lower cost, however, the holistic strategy can achieve an earlier deadline while the batched strategy aims at rational use of resources. We discuss how to find balance between them in the paper with a comprehensive experimental study on these two approaches.

Modeling take-over performance in level 3 conditionally automated vehicles.

PubMed

Gold, Christian; Happee, Riender; Bengler, Klaus

2018-07-01

Taking over vehicle control from a Level 3 conditionally automated vehicle can be a demanding task for a driver. The take-over determines the controllability of automated vehicle functions and thereby also traffic safety. This paper presents models predicting the main take-over performance variables take-over time, minimum time-to-collision, brake application and crash probability. These variables are considered in relation to the situational and driver-related factors time-budget, traffic density, non-driving-related task, repetition, the current lane and driver's age. Regression models were developed using 753 take-over situations recorded in a series of driving simulator experiments. The models were validated with data from five other driving simulator experiments of mostly unrelated authors with another 729 take-over situations. The models accurately captured take-over time, time-to-collision and crash probability, and moderately predicted the brake application. Especially the time-budget, traffic density and the repetition strongly influenced the take-over performance, while the non-driving-related tasks, the lane and drivers' age explained a minor portion of the variance in the take-over performances. Copyright © 2017 Elsevier Ltd. All rights reserved.

VerifEYE: a real-time meat inspection system for the beef processing industry

NASA Astrophysics Data System (ADS)

Kocak, Donna M.; Caimi, Frank M.; Flick, Rick L.; Elharti, Abdelmoula

2003-02-01

Described is a real-time meat inspection system developed for the beef processing industry by eMerge Interactive. Designed to detect and localize trace amounts of contamination on cattle carcasses in the packing process, the system affords the beef industry an accurate, high speed, passive optical method of inspection. Using a method patented by United States Department of Agriculture and Iowa State University, the system takes advantage of fluorescing chlorophyll found in the animal's diet and therefore the digestive track to allow detection and imaging of contaminated areas that may harbor potentially dangerous microbial pathogens. Featuring real-time image processing and documentation of performance, the system can be easily integrated into a processing facility's Hazard Analysis and Critical Control Point quality assurance program. This paper describes the VerifEYE carcass inspection and removal verification system. Results indicating the feasibility of the method, as well as field data collected using a prototype system during four university trials conducted in 2001 are presented. Two successful demonstrations using the prototype system were held at a major U.S. meat processing facility in early 2002.

PRFM enhance wound healing process in skin graft.

PubMed

Reksodiputro, Mirta; Widodo, Dini; Bashiruddin, Jenny; Siregar, Nurjati; Malik, Safarina

2014-12-01

Facial plastic and reconstructive surgery often used skin graft on defects that cannot be covered primarily by a local flap. However, wound healing using skin graft is slow, most of the time the graft is contractured and the take of graft is not optimal. Platelet rich fibrin matrix (PRFM) is a new generation of concentrated platelets that produce natural fibrin and reported to speed up the healing process. Application of PRFM in the skin graft implants is expected to increase the survival of the graft. We used porcine as animal models to elucidate the effect of autologous PRFM on wound healing in full-thickness (FTSG) and split-thickness (STSG) skin grafts. Survival level of the skin graft was determined by using ImageJ software based on the formation of collagen type 1 and graft take. We observed that the use of PRFM in FTSG and STSG increased type 1 collagen formation. We also found that PRFM addition in STSG gave the best skin graft take. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Formation of Load Parameters of Destroyed Massife in Explosion of Multicharge Composition with Separation of its Parts by Profile Inert Interval

NASA Astrophysics Data System (ADS)

Paramonov, G. P.; Mysin, A. V.; Babkin, R. S.

2017-10-01

The paper introduces construction of multicharge composition with separation of parts by the profile inert interval. On the basis of the previous researches, the pulse-forming process at explosion of the borehole multicharge taking into account the offered design is considered. The physical model for definition of reflected wavelet taking into account an increment of radius of cross section of a charging cavity and the expiration of detonation products is offered. A technique is developed for numerical modeling of gas-dynamic processes in a borehole with a change in the axial channel of a profile inert interval caused by a high-temperature flow of gaseous products of an explosion. The authors obtained the dependence of the change in mean pressure on the borehole wall on time for each of the parts of the multicharge. To blast a series of charges of the proposed design, taking into account optimization of the stress fields of neighboring charges, the delay interval is determined for a short-delayed explosion.

Semi-automated Modular Program Constructor for physiological modeling: Building cell and organ models.

PubMed

Jardine, Bartholomew; Raymond, Gary M; Bassingthwaighte, James B

2015-01-01

The Modular Program Constructor (MPC) is an open-source Java based modeling utility, built upon JSim's Mathematical Modeling Language (MML) ( http://www.physiome.org/jsim/) that uses directives embedded in model code to construct larger, more complicated models quickly and with less error than manually combining models. A major obstacle in writing complex models for physiological processes is the large amount of time it takes to model the myriad processes taking place simultaneously in cells, tissues, and organs. MPC replaces this task with code-generating algorithms that take model code from several different existing models and produce model code for a new JSim model. This is particularly useful during multi-scale model development where many variants are to be configured and tested against data. MPC encodes and preserves information about how a model is built from its simpler model modules, allowing the researcher to quickly substitute or update modules for hypothesis testing. MPC is implemented in Java and requires JSim to use its output. MPC source code and documentation are available at http://www.physiome.org/software/MPC/.

Why does picture naming take longer than word reading? The contribution of articulatory processes.

PubMed

Riès, Stéphanie; Legou, Thierry; Burle, Borís; Alario, F-Xavier; Malfait, Nicole

2012-10-01

Since the 19th century, it has been known that response latencies are longer for naming pictures than for reading words aloud. While several interpretations have been proposed, a common general assumption is that this difference stems from cognitive word-selection processes and not from articulatory processes. Here we show that, contrary to this widely accepted view, articulatory processes are also affected by the task performed. To demonstrate this, we used a procedure that to our knowledge had never been used in research on language processing: response-latency fractionating. Along with vocal onsets, we recorded the electromyographic (EMG) activity of facial muscles while participants named pictures or read words aloud. On the basis of these measures, we were able to fractionate the verbal response latencies into two types of time intervals: premotor times (from stimulus presentation to EMG onset), mostly reflecting cognitive processes, and motor times (from EMG onset to vocal onset), related to motor execution processes. We showed that premotor and motor times are both longer in picture naming than in reading, although than in reading, although articulation is already initiated in the latter measure. Future studies based on this new approach should bring valuable clues for a better understanding of the relation between the cognitive and motor processes involved in speech production.

Branching Search

NASA Astrophysics Data System (ADS)

Eliazar, Iddo

2017-12-01

Search processes play key roles in various scientific fields. A widespread and effective search-process scheme, which we term Restart Search, is based on the following restart algorithm: i) set a timer and initiate a search task; ii) if the task was completed before the timer expired, then stop; iii) if the timer expired before the task was completed, then go back to the first step and restart the search process anew. In this paper a branching feature is added to the restart algorithm: at every transition from the algorithm's third step to its first step branching takes place, thus multiplying the search effort. This branching feature yields a search-process scheme which we term Branching Search. The running time of Branching Search is analyzed, closed-form results are established, and these results are compared to the coresponding running-time results of Restart Search.

Time-driven activity-based costing.

PubMed

Kaplan, Robert S; Anderson, Steven R

2004-11-01

In the classroom, activity-based costing (ABC) looks like a great way to manage a company's limited resources. But executives who have tried to implement ABC in their organizations on any significant scale have often abandoned the attempt in the face of rising costs and employee irritation. They should try again, because a new approach sidesteps the difficulties associated with large-scale ABC implementation. In the revised model, managers estimate the resource demands imposed by each transaction, product, or customer, rather than relying on time-consuming and costly employee surveys. This method is simpler since it requires, for each group of resources, estimates of only two parameters: how much it costs per time unit to supply resources to the business's activities (the total overhead expenditure of a department divided by the total number of minutes of employee time available) and how much time it takes to carry out one unit of each kind of activity (as estimated or observed by the manager). This approach also overcomes a serious technical problem associated with employee surveys: the fact that, when asked to estimate time spent on activities, employees invariably report percentages that add up to 100. Under the new system, managers take into account time that is idle or unused. Armed with the data, managers then construct time equations, a new feature that enables the model to reflect the complexity of real-world operations by showing how specific order, customer, and activity characteristics cause processing times to vary. This Tool Kit uses concrete examples to demonstrate how managers can obtain meaningful cost and profitability information, quickly and inexpensively. Rather than endlessly updating and maintaining ABC data,they can now spend their time addressing the deficiencies the model reveals: inefficient processes, unprofitable products and customers, and excess capacity.

Multimedia systems in ultrasound image boundary detection and measurements

NASA Astrophysics Data System (ADS)

Pathak, Sayan D.; Chalana, Vikram; Kim, Yongmin

1997-05-01

Ultrasound as a medical imaging modality offers the clinician a real-time of the anatomy of the internal organs/tissues, their movement, and flow noninvasively. One of the applications of ultrasound is to monitor fetal growth by measuring biparietal diameter (BPD) and head circumference (HC). We have been working on automatic detection of fetal head boundaries in ultrasound images. These detected boundaries are used to measure BPD and HC. The boundary detection algorithm is based on active contour models and takes 32 seconds on an external high-end workstation, SUN SparcStation 20/71. Our goal has been to make this tool available within an ultrasound machine and at the same time significantly improve its performance utilizing multimedia technology. With the advent of high- performance programmable digital signal processors (DSP), the software solution within an ultrasound machine instead of the traditional hardwired approach or requiring an external computer is now possible. We have integrated our boundary detection algorithm into a programmable ultrasound image processor (PUIP) that fits into a commercial ultrasound machine. The PUIP provides both the high computing power and flexibility needed to support computationally-intensive image processing algorithms within an ultrasound machine. According to our data analysis, BPD/HC measurements made on PUIP lie within the interobserver variability. Hence, the errors in the automated BPD/HC measurements using the algorithm are on the same order as the average interobserver differences. On PUIP, it takes 360 ms to measure the values of BPD/HC on one head image. When processing multiple head images in sequence, it takes 185 ms per image, thus enabling 5.4 BPD/HC measurements per second. Reduction in the overall execution time from 32 seconds to a fraction of a second and making this multimedia system available within an ultrasound machine will help this image processing algorithm and other computer-intensive imaging applications become a practical tool for the sonographers in the feature.

Simulation Of Assembly Processes With Technical Of Virtual Reality

NASA Astrophysics Data System (ADS)

García García, Manuel; Arenas Reina, José Manuel; Lite, Alberto Sánchez; Sebastián Pérez, Miguel Ángel

2009-11-01

Virtual reality techniques use at industrial processes provides a real approach to product life cycle. For components manual assembly, the use of virtual surroundings facilitates a simultaneous engineering in which variables such as human factors and productivity take a real act. On the other hand, in the actual phase of industrial competition it is required a rapid adjustment to client needs and to market situation. In this work it is analyzed the assembly of the front components of a vehicle using virtual reality tools and following up a product-process design methodology which includes every life service stage. This study is based on workstations design, taking into account productive and human factors from the ergonomic point of view implementing a postural study of every assembly operation, leaving the rest of stages for a later study. Design is optimized applying this methodology together with the use of virtual reality tools. It is also achieved a 15% reduction on time assembly and of 90% reduction in muscle—skeletal diseases at every assembly operation.

R-process Element Cosmic Rays from Neutron Star Mergers

NASA Astrophysics Data System (ADS)

Komiya, Yutaka; Shigeyama, Toshikazu

2017-09-01

Neutron star mergers (NSMs) are one of the most plausible sources of r-process elements in the universe. Therefore, NSMs can also be a major source of ultra-heavy elements in cosmic rays. In this paper, we first estimate the contribution of r-process elements synthesized in NSMs to the ultra-heavy element cosmic rays (UHCRs) by calculating transport equations that take into account energy loss processes and spallations. We show that the flux of UHCRs accelerated by the NSMs themselves fluctuates by many orders of magnitude on a timescale of several million years and can overwhelm UHCRs accelerated by supernova remnants (SNRs) after an NSM takes place within a few kiloparsec from the solar system. Experiments with very long exposure times using meteorites as UHCR detectors can detect this fluctuation. As a consequence, we show that if NSMs are the primary source of UHCRs, future experiments using meteorites may be able to reveal the event history of NSMs in the solar vicinity. We also describe a possible difference in the abundance pattern and energy spectrum of UHCRs between NSM and SNR accelerations.

R -process Element Cosmic Rays from Neutron Star Mergers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komiya, Yutaka; Shigeyama, Toshikazu

Neutron star mergers (NSMs) are one of the most plausible sources of r -process elements in the universe. Therefore, NSMs can also be a major source of ultra-heavy elements in cosmic rays. In this paper, we first estimate the contribution of r -process elements synthesized in NSMs to the ultra-heavy element cosmic rays (UHCRs) by calculating transport equations that take into account energy loss processes and spallations. We show that the flux of UHCRs accelerated by the NSMs themselves fluctuates by many orders of magnitude on a timescale of several million years and can overwhelm UHCRs accelerated by supernova remnantsmore » (SNRs) after an NSM takes place within a few kiloparsec from the solar system. Experiments with very long exposure times using meteorites as UHCR detectors can detect this fluctuation. As a consequence, we show that if NSMs are the primary source of UHCRs, future experiments using meteorites may be able to reveal the event history of NSMs in the solar vicinity. We also describe a possible difference in the abundance pattern and energy spectrum of UHCRs between NSM and SNR accelerations.« less

Characteristics, Process Parameters, and Inner Components of Anaerobic Bioreactors

PubMed Central

Abdelgadir, Awad; Chen, Xiaoguang; Liu, Jianshe; Xie, Xuehui; Zhang, Jian; Zhang, Kai; Wang, Heng; Liu, Na

2014-01-01

The anaerobic bioreactor applies the principles of biotechnology and microbiology, and nowadays it has been used widely in the wastewater treatment plants due to their high efficiency, low energy use, and green energy generation. Advantages and disadvantages of anaerobic process were shown, and three main characteristics of anaerobic bioreactor (AB), namely, inhomogeneous system, time instability, and space instability were also discussed in this work. For high efficiency of wastewater treatment, the process parameters of anaerobic digestion, such as temperature, pH, Hydraulic retention time (HRT), Organic Loading Rate (OLR), and sludge retention time (SRT) were introduced to take into account the optimum conditions for living, growth, and multiplication of bacteria. The inner components, which can improve SRT, and even enhance mass transfer, were also explained and have been divided into transverse inner components, longitudinal inner components, and biofilm-packing material. At last, the newly developed special inner components were discussed and found more efficient and productive. PMID:24672798

Characteristics, process parameters, and inner components of anaerobic bioreactors.

PubMed

Abdelgadir, Awad; Chen, Xiaoguang; Liu, Jianshe; Xie, Xuehui; Zhang, Jian; Zhang, Kai; Wang, Heng; Liu, Na

2014-01-01

The anaerobic bioreactor applies the principles of biotechnology and microbiology, and nowadays it has been used widely in the wastewater treatment plants due to their high efficiency, low energy use, and green energy generation. Advantages and disadvantages of anaerobic process were shown, and three main characteristics of anaerobic bioreactor (AB), namely, inhomogeneous system, time instability, and space instability were also discussed in this work. For high efficiency of wastewater treatment, the process parameters of anaerobic digestion, such as temperature, pH, Hydraulic retention time (HRT), Organic Loading Rate (OLR), and sludge retention time (SRT) were introduced to take into account the optimum conditions for living, growth, and multiplication of bacteria. The inner components, which can improve SRT, and even enhance mass transfer, were also explained and have been divided into transverse inner components, longitudinal inner components, and biofilm-packing material. At last, the newly developed special inner components were discussed and found more efficient and productive.

Standardization of pitch-range settings in voice acoustic analysis.

PubMed

Vogel, Adam P; Maruff, Paul; Snyder, Peter J; Mundt, James C

2009-05-01

Voice acoustic analysis is typically a labor-intensive, time-consuming process that requires the application of idiosyncratic parameters tailored to individual aspects of the speech signal. Such processes limit the efficiency and utility of voice analysis in clinical practice as well as in applied research and development. In the present study, we analyzed 1,120 voice files, using standard techniques (case-by-case hand analysis), taking roughly 10 work weeks of personnel time to complete. The results were compared with the analytic output of several automated analysis scripts that made use of preset pitch-range parameters. After pitch windows were selected to appropriately account for sex differences, the automated analysis scripts reduced processing time of the 1,120 speech samples to less than 2.5 h and produced results comparable to those obtained with hand analysis. However, caution should be exercised when applying the suggested preset values to pathological voice populations.

GPU-based real-time trinocular stereo vision

NASA Astrophysics Data System (ADS)

Yao, Yuanbin; Linton, R. J.; Padir, Taskin

2013-01-01

Most stereovision applications are binocular which uses information from a 2-camera array to perform stereo matching and compute the depth image. Trinocular stereovision with a 3-camera array has been proved to provide higher accuracy in stereo matching which could benefit applications like distance finding, object recognition, and detection. This paper presents a real-time stereovision algorithm implemented on a GPGPU (General-purpose graphics processing unit) using a trinocular stereovision camera array. Algorithm employs a winner-take-all method applied to perform fusion of disparities in different directions following various image processing techniques to obtain the depth information. The goal of the algorithm is to achieve real-time processing speed with the help of a GPGPU involving the use of Open Source Computer Vision Library (OpenCV) in C++ and NVidia CUDA GPGPU Solution. The results are compared in accuracy and speed to verify the improvement.

Active optical system for advanced 3D surface structuring by laser remelting

NASA Astrophysics Data System (ADS)

Pütsch, O.; Temmler, A.; Stollenwerk, J.; Willenborg, E.; Loosen, P.

2015-03-01

Structuring by laser remelting enables completely new possibilities for designing surfaces since material is redistributed but not wasted. In addition to technological advantages, cost and time benefits yield from shortened process times, the avoidance of harmful chemicals and the elimination of subsequent finishing steps such as cleaning and polishing. The functional principle requires a completely new optical machine technology that maintains the spatial and temporal superposition and manipulation of three different laser beams emitted from two laser sources of different wavelength. The optical system has already been developed and demonstrated for the processing of flat samples of hot and cold working steel. However, since particularly the structuring of 3D-injection molds represents an application example of high innovation potential, the optical system has to take into account the elliptical beam geometry that occurs when the laser beams irradiate a curved surface. To take full advantage of structuring by remelting for the processing of 3D surfaces, additional optical functionality, called EPS (elliptical pre-shaping) has to be integrated into the existing set-up. The development of the beam shaping devices not only requires the analysis of the mechanisms of the beam projection but also a suitable optical design. Both aspects are discussed in this paper.

Wideband Agile Digital Microwave Radiometer

NASA Technical Reports Server (NTRS)

Gaier, Todd C.; Brown, Shannon T.; Ruf, Christopher; Gross, Steven

2012-01-01

The objectives of this work were to take the initial steps needed to develop a field programmable gate array (FPGA)- based wideband digital radiometer backend (>500 MHz bandwidth) that will enable passive microwave observations with minimal performance degradation in a radiofrequency-interference (RFI)-rich environment. As manmade RF emissions increase over time and fill more of the microwave spectrum, microwave radiometer science applications will be increasingly impacted in a negative way, and the current generation of spaceborne microwave radiometers that use broadband analog back ends will become severely compromised or unusable over an increasing fraction of time on orbit. There is a need to develop a digital radiometer back end that, for each observation period, uses digital signal processing (DSP) algorithms to identify the maximum amount of RFI-free spectrum across the radiometer band to preserve bandwidth to minimize radiometer noise (which is inversely related to the bandwidth). Ultimately, the objective is to incorporate all processing necessary in the back end to take contaminated input spectra and produce a single output value free of manmade signals to minimize data rates for spaceborne radiometer missions. But, to meet these objectives, several intermediate processing algorithms had to be developed, and their performance characterized relative to typical brightness temperature accuracy re quirements for current and future microwave radiometer missions, including those for measuring salinity, soil moisture, and snow pack.

Mass, Energy, Space And Time System Theory---MEST A way to help our earth

NASA Astrophysics Data System (ADS)

Cao, Dayong

2009-03-01

There are two danger to our earth. The first, the sun will expand to devour our earth, for example, the ozonosphere of our earth is be broken; The second, the asteroid will impact near our earth. According to MEST, there is a interaction between Black hole (and Dark matter-energy) and Solar system. The orbit of Jupiter is a boundary of the interaction between Black hole (and Dark matter-energy) and Solar system. Because there are four terrestrial planets which is mass-energy center as solar system, and there are four or five Jovian planets which is gas (space-time) center as black hole system. According to MEST, dark matter-energy take the velocity of Jupiter gose up. So there are a lot of asteroids and dark matter-energy near the orbit of Jupiter-the boundary. Dark matter-energy can change the orbit of asteroid, and take it impacted near our earth. Because the Dark matter-energy will pressure the Solar system. It is a inverse process with sun's expandedness. So the ``two danger'' is from a new process of the balance system between Black hole (and Dark matter-energy) and Solar system. According to MEST, We need to find the right point for our earth in the ``new process of the balance system.''

Object Categorization in Finer Levels Relies More on Higher Spatial Frequencies and Takes Longer.

PubMed

Ashtiani, Matin N; Kheradpisheh, Saeed R; Masquelier, Timothée; Ganjtabesh, Mohammad

2017-01-01

The human visual system contains a hierarchical sequence of modules that take part in visual perception at different levels of abstraction, i.e., superordinate, basic, and subordinate levels. One important question is to identify the "entry" level at which the visual representation is commenced in the process of object recognition. For a long time, it was believed that the basic level had a temporal advantage over two others. This claim has been challenged recently. Here we used a series of psychophysics experiments, based on a rapid presentation paradigm, as well as two computational models, with bandpass filtered images of five object classes to study the processing order of the categorization levels. In these experiments, we investigated the type of visual information required for categorizing objects in each level by varying the spatial frequency bands of the input image. The results of our psychophysics experiments and computational models are consistent. They indicate that the different spatial frequency information had different effects on object categorization in each level. In the absence of high frequency information, subordinate and basic level categorization are performed less accurately, while the superordinate level is performed well. This means that low frequency information is sufficient for superordinate level, but not for the basic and subordinate levels. These finer levels rely more on high frequency information, which appears to take longer to be processed, leading to longer reaction times. Finally, to avoid the ceiling effect, we evaluated the robustness of the results by adding different amounts of noise to the input images and repeating the experiments. As expected, the categorization accuracy decreased and the reaction time increased significantly, but the trends were the same. This shows that our results are not due to a ceiling effect. The compatibility between our psychophysical and computational results suggests that the temporal advantage of the superordinate (resp. basic) level to basic (resp. subordinate) level is mainly due to the computational constraints (the visual system processes higher spatial frequencies more slowly, and categorization in finer levels depends more on these higher spatial frequencies).

Object Categorization in Finer Levels Relies More on Higher Spatial Frequencies and Takes Longer

PubMed Central

Ashtiani, Matin N.; Kheradpisheh, Saeed R.; Masquelier, Timothée; Ganjtabesh, Mohammad

2017-01-01

The human visual system contains a hierarchical sequence of modules that take part in visual perception at different levels of abstraction, i.e., superordinate, basic, and subordinate levels. One important question is to identify the “entry” level at which the visual representation is commenced in the process of object recognition. For a long time, it was believed that the basic level had a temporal advantage over two others. This claim has been challenged recently. Here we used a series of psychophysics experiments, based on a rapid presentation paradigm, as well as two computational models, with bandpass filtered images of five object classes to study the processing order of the categorization levels. In these experiments, we investigated the type of visual information required for categorizing objects in each level by varying the spatial frequency bands of the input image. The results of our psychophysics experiments and computational models are consistent. They indicate that the different spatial frequency information had different effects on object categorization in each level. In the absence of high frequency information, subordinate and basic level categorization are performed less accurately, while the superordinate level is performed well. This means that low frequency information is sufficient for superordinate level, but not for the basic and subordinate levels. These finer levels rely more on high frequency information, which appears to take longer to be processed, leading to longer reaction times. Finally, to avoid the ceiling effect, we evaluated the robustness of the results by adding different amounts of noise to the input images and repeating the experiments. As expected, the categorization accuracy decreased and the reaction time increased significantly, but the trends were the same. This shows that our results are not due to a ceiling effect. The compatibility between our psychophysical and computational results suggests that the temporal advantage of the superordinate (resp. basic) level to basic (resp. subordinate) level is mainly due to the computational constraints (the visual system processes higher spatial frequencies more slowly, and categorization in finer levels depends more on these higher spatial frequencies). PMID:28790954

The judicial process: an overview from the TDA Council on Ethics and Judicial Affairs.

PubMed

Burk, Roy N

2011-08-01

From time to time, the Council on Ethics and Judicial Affairs must investigate and act on the alleged unethical behavior of Texas Dental Association members. Because the alleged behavior is directed at a colleague and TDA member, the work of the council is neither comfortable nor inviting. Nonetheless, council decisions are made taking into account its mission to investigate the allegation between the parties and to improve dental ethics in the state.

Technology Readiness Assessment of Department of Energy Waste Processing Facilities

DTIC Science & Technology

2007-09-11

Must Be Reliable, Robust, Flexible, and Durable 6 EM Is Piloting the TRA/AD2 Process Hanford Waste Treatment Plant ( WTP ) – The Initial Pilot Project...Evaluation WTP can only treat ~ ½ of the LAW in the time it will take to treat all the HLW. • There is a need for tank space that will get more urgent with...Facility before the WTP Pretreatment and High-Level Waste (HLW) Vitrification Facilities are available (Requires tank farm pretreatment capability) TRAs

Chemistry between the stars.

PubMed

Irvine, W M

1987-01-01

Life--as we know it--is a chemical process, based on water and carbon compounds. Complex organic molecules are made primarily from the biogenic elements--carbon, hydrogen, nitrogen, oxygen, phosphorus and sulfur--that formed deep within massive ancient stars. How did these elements travel from their stellar birthplaces across time and space to make up the life-form that is reading these words? In this article, we'll take a look at the chemical processes that set the stage for the origin of life.

Enhanced Detection of Orthogonal Radar Waveforms Using Time-Frequency and Bi-Frequency Signal Processing Techniques

DTIC Science & Technology

2008-09-01

using the principle of pheromones . The termite senses the pheromone , which tells him to gather up dirt in its mouth and deposit it where the scent of...the pheromone is the strongest. The termite gathers dirt and moves to the location of the strongest scent and deposits the mud there. As this...process is repeated by a number of termites all leaving their own contribution of pheromone at the scene, the autocatalytic effect takes over. This

Combustion Joining for Composite Fabrication

DTIC Science & Technology

2009-10-25

Inert preheating Process beginning T e m p e r a t u r e , o C Time, s I = 600 Amps D = 10 mm Joule preheating only up to Tig UNCLASSIFIED • C...Honeywell Corp (South Bend, IN) • Currently build aircraft brake disks from carbon fibers • use a long (~ 100 day) CVD process to densify • Brake wear...oxidation with every landing A380 -rejected take off test C-C brakes UNCLASSIFIED Joining C-Based Materials • Difficult task – Carbon cannot be welded

Early boost and slow consolidation in motor skill learning.

PubMed

Hotermans, Christophe; Peigneux, Philippe; Maertens de Noordhout, Alain; Moonen, Gustave; Maquet, Pierre

2006-01-01

Motorskill learning is a dynamic process that continues covertly after training has ended and eventually leads to delayed increments in performance. Current theories suggest that this off-line improvement takes time and appears only after several hours. Here we show an early transient and short-lived boost in performance, emerging as early as 5-30 min after training but no longer observed 4 h later. This early boost is predictive of the performance achieved 48 h later, suggesting its functional relevance for memory processes.

Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

PubMed Central

Chang, Glenn Hsuan-Chen; Tian, Chen; Hung, Yuen-Siang

2011-01-01

Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA) can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately load the implants. This fixture mount can also serve as a temporary abutment for immediate chair-side fabrication of provisional prosthesis. Two clinical cases are presented. Results: A clinical case utilizing the fixture mount abutment (DIFMA)/implant assembly is presented. The precision of fitting between the impression copings and implants is secured with this system. The chair time for taking an immediate impression is greatly reduced. Less cost for the restoration is provided and patient comfort is delivered. Conclusions: More patient satisfaction can be conferred by employing the fixture mount in the process of immediate impression taking and as an immediate provisional abutment. PMID:22090763

Femtosecond transient absorption spectroscopy of silanized silicon quantum dots

NASA Astrophysics Data System (ADS)

Kuntermann, Volker; Cimpean, Carla; Brehm, Georg; Sauer, Guido; Kryschi, Carola; Wiggers, Hartmut

2008-03-01

Excitonic properties of colloidal silicon quantum dots (Si qdots) with mean sizes of 4nm were examined using stationary and time-resolved optical spectroscopy. Chemically stable silicon oxide shells were prepared by controlled surface oxidation and silanization of HF-etched Si qdots. The ultrafast relaxation dynamics of photogenerated excitons in Si qdot colloids were studied on the picosecond time scale from 0.3psto2.3ns using femtosecond-resolved transient absorption spectroscopy. The time evolution of the transient absorption spectra of the Si qdots excited with a 150fs pump pulse at 390nm was observed to consist of decays of various absorption transitions of photoexcited electrons in the conduction band which overlap with both the photoluminescence and the photobleaching of the valence band population density. Gaussian deconvolution of the spectroscopic data allowed for disentangling various carrier relaxation processes involving electron-phonon and phonon-phonon scatterings or arising from surface-state trapping. The initial energy and momentum relaxation of hot carriers was observed to take place via scattering by optical phonons within 0.6ps . Exciton capturing by surface states forming shallow traps in the amorphous SiOx shell was found to occur with a time constant of 4ps , whereas deeper traps presumably localized in the Si-SiOx interface gave rise to exciton trapping processes with time constants of 110 and 180ps . Electron transfer from initially populated, higher-lying surface states to the conduction band of Si qdots (>2nm) was observed to take place within 400 or 700fs .

Space and time-resolved probing of heterogeneous catalysis reactions using lab-on-a-chip

NASA Astrophysics Data System (ADS)

Navin, Chelliah V.; Krishna, Katla Sai; Theegala, Chandra S.; Kumar, Challa S. S. R.

2016-03-01

Probing catalytic reactions on a catalyst surface in real time is a major challenge. Herein, we demonstrate the utility of a continuous flow millifluidic chip reactor coated with a nanostructured gold catalyst as an effective platform for in situ investigation of the kinetics of catalytic reactions by taking 5-(hydroxymethyl)furfural (HMF) to 2,5-furandicarboxylic acid (FDCA) conversion as a model reaction. The idea conceptualized in this paper can not only dramatically change the ability to probe the time-resolved kinetics of heterogeneous catalysis reactions but also used for investigating other chemical and biological catalytic processes, thereby making this a broad platform for probing reactions as they occur within continuous flow reactors.Probing catalytic reactions on a catalyst surface in real time is a major challenge. Herein, we demonstrate the utility of a continuous flow millifluidic chip reactor coated with a nanostructured gold catalyst as an effective platform for in situ investigation of the kinetics of catalytic reactions by taking 5-(hydroxymethyl)furfural (HMF) to 2,5-furandicarboxylic acid (FDCA) conversion as a model reaction. The idea conceptualized in this paper can not only dramatically change the ability to probe the time-resolved kinetics of heterogeneous catalysis reactions but also used for investigating other chemical and biological catalytic processes, thereby making this a broad platform for probing reactions as they occur within continuous flow reactors. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06752a

Impact of worktime arrangements on work-home interference among Dutch employees.

PubMed

Jansen, Nicole W H; Kant, Ijmert; Nijhuis, Frans J N; Swaen, Gerard M H; Kristensen, Tage S

2004-04-01

This study examined the effects of different worktime arrangements on work-home interference while taking into account other work-related factors, private situation and health status, explored gender differences in this relation, and examined reciprocal effects between workhours and work-home interference. Data from the Maastricht cohort study on fatigue at work were used with 8 months of follow-up (N=6947 at baseline). Worktime arrangements were related to work-home interference among the men and women, even after control for confounding. As compared with daywork, baseline shiftwork was associated with higher work-home interference over time. Within daywork, full-time work was prospectively related to higher work-home interference than part-time work was. For full-timers, baseline overtime work, hours of overtime work, change in number of workhours, and commuting time were related to higher work-home interference over time, whereas compensation for overtime work, familiarity with work roster, ability to take a day off, and a decrease in workhours at own request were associated with less work-home interference. For the part-timers, baseline overtime work and commuting time were related to higher work-home interference over time, whereas compensation for overtime, flexible workhours, and ability to take a day off were protective against work-home interference. Reciprocal relations between work-home interference and workhours were also found. Worktime arrangements are clearly related to work-home interference. Because reciprocal effects exist as well, important selection processes may exist. Nevertheless, specific characteristics of worktime arrangements could constitute useful tools for reducing work-home interference.

Timing in turn-taking and its implications for processing models of language

PubMed Central

Levinson, Stephen C.; Torreira, Francisco

2015-01-01

The core niche for language use is in verbal interaction, involving the rapid exchange of turns at talking. This paper reviews the extensive literature about this system, adding new statistical analyses of behavioral data where they have been missing, demonstrating that turn-taking has the systematic properties originally noted by Sacks et al. (1974; hereafter SSJ). This system poses some significant puzzles for current theories of language processing: the gaps between turns are short (of the order of 200 ms), but the latencies involved in language production are much longer (over 600 ms). This seems to imply that participants in conversation must predict (or ‘project’ as SSJ have it) the end of the current speaker’s turn in order to prepare their response in advance. This in turn implies some overlap between production and comprehension despite their use of common processing resources. Collecting together what is known behaviorally and experimentally about the system, the space for systematic explanations of language processing for conversation can be significantly narrowed, and we sketch some first model of the mental processes involved for the participant preparing to speak next. PMID:26124727

The theory of active involvement: processes underlying interventions that engage adolescents in message planning and/or production.

PubMed

Greene, Kathryn

2013-01-01

Adolescence is a time of increased risk taking, and recent intervention strategies have included adolescents planning or producing antirisk messages for their peers. Although these projects may generate enthusiasm, we know little about message planning or production as a strategy for changing adolescent decision-making and behavior. This article articulates the Theory of Active Involvement (TAI) to describe and explain the processes through which these active involvement interventions influence adolescents. TAI is based on social cognitive theory's notion of self-regulation and examines multiple perspective taking and activating the self-reflection processes. The theory specifically describes the process of cognitive changes experienced by participants in active involvement interventions. The sequence is conceptualized as starting when engagement with the intervention (arousal and involvement) produces skill and knowledge gains (immediate outcomes) that lead to reflection (perceived discrepancy) and then other cognitions (expectancies, norms, intentions), with the ultimate outcome being behavior change. Engaging the target audience in a process of self-reflection is conceptualized as the crucial ingredient for meaningful and sustainable change in cognitions and behavior. This article provides valuable insight into how active involvement strategies function and how to best design these interventions, particularly those targeting adolescents.

Processing ARM VAP data on an AWS cluster

NASA Astrophysics Data System (ADS)

Martin, T.; Macduff, M.; Shippert, T.

2017-12-01

The Atmospheric Radiation Measurement (ARM) Data Management Facility (DMF) manages over 18,000 processes and 1.3 TB of data each day. This includes many Value Added Products (VAPs) that make use of multiple instruments to produce the derived products that are scientifically relevant. A thermodynamic and cloud profile VAP is being developed to provide input to the ARM Large-eddy simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) project (https://www.arm.gov/capabilities/vaps/lasso-122) . This algorithm is CPU intensive and the processing requirements exceeded the available DMF computing capacity. Amazon Web Service (AWS) along with CfnCluster was investigated to see how it would perform. This cluster environment is cost effective and scales dynamically based on demand. We were able to take advantage of autoscaling which allowed the cluster to grow and shrink based on the size of the processing queue. We also were able to take advantage of the Amazon Web Services spot market to further reduce the cost. Our test was very successful and found that cloud resources can be used to efficiently and effectively process time series data. This poster will present the resources and methodology used to successfully run the algorithm.

The Parallel Implementation of Algorithms for Finding the Reflection Symmetry of the Binary Images

NASA Astrophysics Data System (ADS)

Fedotova, S.; Seredin, O.; Kushnir, O.

2017-05-01

In this paper, we investigate the exact method of searching an axis of binary image symmetry, based on brute-force search among all potential symmetry axes. As a measure of symmetry, we use the set-theoretic Jaccard similarity applied to two subsets of pixels of the image which is divided by some axis. Brute-force search algorithm definitely finds the axis of approximate symmetry which could be considered as ground-truth, but it requires quite a lot of time to process each image. As a first step of our contribution we develop the parallel version of the brute-force algorithm. It allows us to process large image databases and obtain the desired axis of approximate symmetry for each shape in database. Experimental studies implemented on "Butterflies" and "Flavia" datasets have shown that the proposed algorithm takes several minutes per image to find a symmetry axis. However, in case of real-world applications we need computational efficiency which allows solving the task of symmetry axis search in real or quasi-real time. So, for the task of fast shape symmetry calculation on the common multicore PC we elaborated another parallel program, which based on the procedure suggested before in (Fedotova, 2016). That method takes as an initial axis the axis obtained by superfast comparison of two skeleton primitive sub-chains. This process takes about 0.5 sec on the common PC, it is considerably faster than any of the optimized brute-force methods including ones implemented in supercomputer. In our experiments for 70 percent of cases the found axis coincides with the ground-truth one absolutely, and for the rest of cases it is very close to the ground-truth.

MODIS Solar Calibration Simulation Assisted Refinement

NASA Technical Reports Server (NTRS)

Waluschka, Eugene; Xiaoxiong, Xiong; Guenther, Bruce; Barnes, William; Moyer, David; Salomonson, Vincent V.

2004-01-01

A detailed optical radiometric model has been created of the MODIS instruments solar calibration process. This model takes into account the orientation and distance of the spacecraft with respect to the sun, the correlated motions of the scan mirror and the sun, all of the optical elements, the detector locations on the visible and near IR focal planes, the solar diffuser and the attenuation screen with all of its hundreds of pinholes. An efficient computational scheme, takes into account all of these factors and has produced results which reproduce the observed time dependent intensity variations on the two focal planes with considerable fidelity. This agreement between predictions and observations, has given insight to the causes of some small time dependent variations and how to incorporate them into the overall calibration scheme. The radiometric model is described and modeled and actual measurements are presented and compared.

Student Partnerships to Build Organizational Capacity.

PubMed

Hutchinson, Carole; Hyden, Christel

2016-01-01

Public health organizations-whether community-based nonprofits, centers affiliated with a university, or some other entity-can benefit greatly from partnering with students to build capacity and grow in a variety of ways. However, there are many issues to consider before taking on students as interns or volunteers. These include realistic considerations of supervisory time and effort, determining if you can actually match student skills with organizational programming not to mention legal requirements based on federal and state laws. This article provides a detailed overview of steps that organizations interested in partnering with students should follow once determining that taking on a student or multiple students is viable. These include issues around time lines, scheduling, the student selection process, supervising, ongoing mentoring, as well as expectations after the practicum or volunteer experience has ended. © 2015 Society for Public Health Education.

On numerical model of time-dependent processes in three-dimensional porous heat-releasing objects

NASA Astrophysics Data System (ADS)

Lutsenko, Nickolay A.

2016-10-01

The gas flows in the gravity field through porous objects with heat-releasing sources are investigated when the self-regulation of the flow rate of the gas passing through the porous object takes place. Such objects can appear after various natural or man-made disasters (like the exploded unit of the Chernobyl NPP). The mathematical model and the original numerical method, based on a combination of explicit and implicit finite difference schemes, are developed for investigating the time-dependent processes in 3D porous energy-releasing objects. The advantage of the numerical model is its ability to describe unsteady processes under both natural convection and forced filtration. The gas cooling of 3D porous objects with different distribution of heat sources is studied using computational experiment.

Identification Male Fertility Through Abnormalities Sperm Based Morphology (Teratospermia) using Invariant Moment Method

NASA Astrophysics Data System (ADS)

Syahputra, M. F.; Chairani, R.; Seniman; Rahmat, R. F.; Abdullah, D.; Napitupulu, D.; Setiawan, M. I.; Albra, W.; Erliana, C. I.; Andayani, U.

2018-03-01

Sperm morphology is still a standard laboratory analysis in diagnosing infertility in men. Manually identification of sperm form is still not accurate, the difficulty in seeing the form of the invisible sperm from the digital microscope image is often a weakness in the process of identification and takes a long time. Therefore, male fertility identification application system is needed Through sperm abnormalities based on sperm morphology (teratospermia). The method used is invariant moment method. This study uses 15 data testing and 20 data training sperm image. That the process of male fertility identification through sperm abnormalities based on sperm morphology (teratospermia) has an accuracy rate of 80.77%. Use of time to process Identification of male fertility through sperm abnormalities Based on sperm morphology (teratospermia) during 0.4369 seconds.

Introducing automation to the molecular diagnosis of Trypanosoma cruzi infection: A comparative study of sample treatments, DNA extraction methods and real-time PCR assays.

PubMed

Abras, Alba; Ballart, Cristina; Llovet, Teresa; Roig, Carme; Gutiérrez, Cristina; Tebar, Silvia; Berenguer, Pere; Pinazo, María-Jesús; Posada, Elizabeth; Gascón, Joaquim; Schijman, Alejandro G; Gállego, Montserrat; Muñoz, Carmen

2018-01-01

Polymerase chain reaction (PCR) has become a useful tool for the diagnosis of Trypanosoma cruzi infection. The development of automated DNA extraction methodologies and PCR systems is an important step toward the standardization of protocols in routine diagnosis. To date, there are only two commercially available Real-Time PCR assays for the routine laboratory detection of T. cruzi DNA in clinical samples: TCRUZIDNA.CE (Diagnostic Bioprobes Srl) and RealCycler CHAG (Progenie Molecular). Our aim was to evaluate the RealCycler CHAG assay taking into account the whole process. We assessed the usefulness of an automated DNA extraction system based on magnetic particles (EZ1 Virus Mini Kit v2.0, Qiagen) combined with a commercially available Real-Time PCR assay targeting satellite DNA (SatDNA) of T. cruzi (RealCycler CHAG), a methodology used for routine diagnosis in our hospital. It was compared with a well-known strategy combining a commercial DNA isolation kit based on silica columns (High Pure PCR Template Preparation Kit, Roche Diagnostics) with an in-house Real-Time PCR targeting SatDNA. The results of the two methodologies were in almost perfect agreement, indicating they can be used interchangeably. However, when variations in protocol factors were applied (sample treatment, extraction method and Real-Time PCR), the results were less convincing. A comprehensive fine-tuning of the whole procedure is the key to successful results. Guanidine EDTA-blood (GEB) samples are not suitable for DNA extraction based on magnetic particles due to inhibition, at least when samples are not processed immediately. This is the first study to evaluate the RealCycler CHAG assay taking into account the overall process, including three variables (sample treatment, extraction method and Real-Time PCR). Our findings may contribute to the harmonization of protocols between laboratories and to a wider application of Real-Time PCR in molecular diagnostic laboratories associated with health centers.

Electronic-To-Optical-To-Electronic Packet-Data Conversion

NASA Technical Reports Server (NTRS)

Monacos, Steve

1996-01-01

Space-time multiplexer (STM) cell-based communication system designed to take advantage of both high throughput attainable in optical transmission links and flexibility and functionality of electronic processing, storage, and switching. Long packets segmented and transmitted optically by wavelength-division multiplexing. Performs optoelectronic and protocol conversion between electronic "store-and-forward" protocols and optical "hot-potato" protocols.

Postcards from a Road Trip to Innovation: One Professor's Sabbatical

ERIC Educational Resources Information Center

Kelley, Todd R.

2016-01-01

Precious moments in life for an educator are taking time to reflect upon his or her teaching practices to evaluate effectiveness and overall impact. Often this reflection is a weekly if not a daily process for educators using a reflective practitioner model (SchÖn, 1983). For professors, many universities have opportunities for tenured faculty to…

Vocational Education and Training Teacher Professional Development: Tensions and Context

ERIC Educational Resources Information Center

Bound, Helen

2011-01-01

Planning and implementing teacher professional development is a process of engaging in organisational learning and change. Yet our planning and implementation of professional development is at times a series of one-off sessions and can be quite ad hoc. This paper argues that teacher learning takes place not only through formal sessions but also…

Spinning Straw into Gold: How State Education Agencies Can Transform Their Data to Improve Critical School Resource Decisions

ERIC Educational Resources Information Center

Frank, Stephen; Trawick-Smith, Joseph

2014-01-01

K-12 education resources are often allocated non-strategically, with schools spending time and money on activities that have little relationship to student outcomes. Most of these decisions take place within districts, rooted in the processes of setting schedules, staffing levels, and assignments, and creating final budgets. Local Education…

Teaching 2.0: Teams Keep Teachers and Students Plugged into Technology

ERIC Educational Resources Information Center

Bourgeois, Michelle; Hunt, Bud

2011-01-01

A Colorado district develops a two-year program that gives teacher teams an opportunity to learn how to use digital tools in the classroom. Called the Digital Learning Collaborative, it is built on three things about professional learning: (1) Learning takes time; (2) Learning is a social process; and (3) Learning about technology should be…

Teach Your Students to Fail Better with Design Thinking

ERIC Educational Resources Information Center

Long, Christian

2012-01-01

Design thinking is about using design to improve the human experience. It combines collaboration, systems thinking, and a balance of creative and analytical habits. It also fuels what the students want for themselves: making an impact on the real world in real time and having adults take their passions seriously. The process essentially comes down…

Assessing Oral Proficiency for Intercultural Professional Communication: The CEFcult Project

ERIC Educational Resources Information Center

Beaven, Ana; Neuhoff, Antje

2012-01-01

Technology has been part of the language learning process, both inside and outside the classroom, for decades, helping to bridge the gap between different contexts of learning. At the same time, the concept of lifelong-learning has widened our understanding of what learning is, what different forms it can take, and of the importance of considering…

How similar are forest disturbance maps derived from different Landsat time series algorithms?

Treesearch

Warren B. Cohen; Sean P. Healey; Zhiqiang Yang; Stephen V. Stehman; C. Kenneth Brewer; Evan B. Brooks; Noel Gorelick; Chengqaun Huang; M. Joseph Hughes; Robert E. Kennedy; Thomas R. Loveland; Gretchen G. Moisen; Todd A. Schroeder; James E. Vogelmann; Curtis E. Woodcock; Limin Yang; Zhe Zhu

2017-01-01

Disturbance is a critical ecological process in forested systems, and disturbance maps are important for understanding forest dynamics. Landsat data are a key remote sensing dataset for monitoring forest disturbance and there recently has been major growth in the development of disturbance mapping algorithms. Many of these algorithms take advantage of the high temporal...

The Quarterly of the National Writing Project, 1997.

ERIC Educational Resources Information Center

Loofbourrow, Peggy Trump, Ed.; Peterson, Art, Ed.

1997-01-01

Articles in this publication address the writing process, teaching writing, and research on the teaching of writing, and take the form of personal experience or opinion, or explore the work of others who have contributed to the field. Articles in the first issue of this volume include: "What the Children Convey: On Matters of Time, Talk, and…

School Climate Improvement Action Guide for Working with Students. School Climate Improvement Resource Package

ERIC Educational Resources Information Center

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines key action steps to engage students in the school climate improvement process. Key action steps are provided for the following strategies: (1) Participate in planning for school climate improvements; (2) Engage stakeholders in…

Understanding in an Instant: Neurophysiological Evidence for Mechanistic Language Circuits in the Brain

ERIC Educational Resources Information Center

Pulvermuller, Friedemann; Shtyrov, Yury; Hauk, Olaf

2009-01-01

How long does it take the human mind to grasp the idea when hearing or reading a sentence? Neurophysiological methods looking directly at the time course of brain activity indexes of comprehension are critical for finding the answer to this question. As the dominant cognitive approaches, models of serial/cascaded and parallel processing, make…

Degradation data analysis based on a generalized Wiener process subject to measurement error

NASA Astrophysics Data System (ADS)

Li, Junxing; Wang, Zhihua; Zhang, Yongbo; Fu, Huimin; Liu, Chengrui; Krishnaswamy, Sridhar

2017-09-01

Wiener processes have received considerable attention in degradation modeling over the last two decades. In this paper, we propose a generalized Wiener process degradation model that takes unit-to-unit variation, time-correlated structure and measurement error into considerations simultaneously. The constructed methodology subsumes a series of models studied in the literature as limiting cases. A simple method is given to determine the transformed time scale forms of the Wiener process degradation model. Then model parameters can be estimated based on a maximum likelihood estimation (MLE) method. The cumulative distribution function (CDF) and the probability distribution function (PDF) of the Wiener process with measurement errors are given based on the concept of the first hitting time (FHT). The percentiles of performance degradation (PD) and failure time distribution (FTD) are also obtained. Finally, a comprehensive simulation study is accomplished to demonstrate the necessity of incorporating measurement errors in the degradation model and the efficiency of the proposed model. Two illustrative real applications involving the degradation of carbon-film resistors and the wear of sliding metal are given. The comparative results show that the constructed approach can derive a reasonable result and an enhanced inference precision.

ADDING REALISM TO NUCLEAR MATERIAL DISSOLVING ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williamson, B.

2011-08-15

Two new criticality modeling approaches have greatly increased the efficiency of dissolver operations in H-Canyon. The first new approach takes credit for the linear, physical distribution of the mass throughout the entire length of the fuel assembly. This distribution of mass is referred to as the linear density. Crediting the linear density of the fuel bundles results in using lower fissile concentrations, which allows higher masses to be charged to the dissolver. Also, this approach takes credit for the fact that only part of the fissile mass is wetted at a time. There are multiple assemblies stacked on top ofmore » each other in a bundle. On average, only 50-75% of the mass (the bottom two or three assemblies) is wetted at a time. This means that only 50-75% (depending on operating level) of the mass is moderated and is contributing to the reactivity of the system. The second new approach takes credit for the progression of the dissolving process. Previously, dissolving analysis looked at a snapshot in time where the same fissile material existed both in the wells and in the bulk solution at the same time. The second new approach models multiple consecutive phases that simulate the fissile material moving from a high concentration in the wells to a low concentration in the bulk solution. This approach is more realistic and allows higher fissile masses to be charged to the dissolver.« less

Numerical Simulation of Evacuation Process in Malaysia By Using Distinct-Element-Method Based Multi-Agent Model

NASA Astrophysics Data System (ADS)

Abustan, M. S.; Rahman, N. A.; Gotoh, H.; Harada, E.; Talib, S. H. A.

2016-07-01

In Malaysia, not many researches on crowd evacuation simulation had been reported. Hence, the development of numerical crowd evacuation process by taking into account people behavioral patterns and psychological characteristics is crucial in Malaysia. On the other hand, tsunami disaster began to gain attention of Malaysian citizens after the 2004 Indian Ocean Tsunami that need quick evacuation process. In relation to the above circumstances, we have conducted simulations of tsunami evacuation process at the Miami Beach of Penang Island by using Distinct Element Method (DEM)-based crowd behavior simulator. The main objectives are to investigate and reproduce current conditions of evacuation process at the said locations under different hypothetical scenarios for the efficiency study of the evacuation. The sim-1 is initial condition of evacuation planning while sim-2 as improvement of evacuation planning by adding new evacuation area. From the simulation result, sim-2 have a shorter time of evacuation process compared to the sim-1. The evacuation time recuded 53 second. The effect of the additional evacuation place is confirmed from decreasing of the evacuation completion time. Simultaneously, the numerical simulation may be promoted as an effective tool in studying crowd evacuation process.

A guide for the application of analytics on healthcare processes: A dynamic view on patient pathways.

PubMed

Lismont, Jasmien; Janssens, Anne-Sophie; Odnoletkova, Irina; Vanden Broucke, Seppe; Caron, Filip; Vanthienen, Jan

2016-10-01

The aim of this study is to guide healthcare instances in applying process analytics on healthcare processes. Process analytics techniques can offer new insights in patient pathways, workflow processes, adherence to medical guidelines and compliance with clinical pathways, but also bring along specific challenges which will be examined and addressed in this paper. The following methodology is proposed: log preparation, log inspection, abstraction and selection, clustering, process mining, and validation. It was applied on a case study in the type 2 diabetes mellitus domain. Several data pre-processing steps are applied and clarify the usefulness of process analytics in a healthcare setting. Healthcare utilization, such as diabetes education, is analyzed and compared with diabetes guidelines. Furthermore, we take a look at the organizational perspective and the central role of the GP. This research addresses four challenges: healthcare processes are often patient and hospital specific which leads to unique traces and unstructured processes; data is not recorded in the right format, with the right level of abstraction and time granularity; an overflow of medical activities may cloud the analysis; and analysts need to deal with data not recorded for this purpose. These challenges complicate the application of process analytics. It is explained how our methodology takes them into account. Process analytics offers new insights into the medical services patients follow, how medical resources relate to each other and whether patients and healthcare processes comply with guidelines and regulations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Seeing it my way: a case of a selective deficit in inhibiting self-perspective.

PubMed

Samson, Dana; Apperly, Ian A; Kathirgamanathan, Umalini; Humphreys, Glyn W

2005-05-01

Little is known about the functional and neural architecture of social reasoning, one major obstacle being that we crucially lack the relevant tools to test potentially different social reasoning components. In the case of belief reasoning, previous studies have tried to separate the processes involved in belief reasoning per se from those involved in the processing of the high incidental demands such as the working memory demands of typical belief tasks. In this study, we developed new belief tasks in order to disentangle, for the first time, two perspective taking components involved in belief reasoning: (i) the ability to inhibit one's own perspective (self-perspective inhibition); and (ii) the ability to infer someone else's perspective as such (other-perspective taking). The two tasks had similar demands in other-perspective taking as they both required the participant to infer that a character has a false belief about an object's location. However, the tasks varied in the self-perspective inhibition demands. In the task with the lowest self-perspective inhibition demands, at the time the participant had to infer the character's false belief, he or she had no idea what the new object's location was. In contrast, in the task with the highest self-perspective inhibition demands, at the time the participant had to infer the character's false belief, he or she knew where the object was actually located (and this knowledge had thus to be inhibited). The two tasks were presented to a stroke patient, WBA, with right prefrontal and temporal damage. WBA performed well in the low-inhibition false-belief task but showed striking difficulty in the task placing high self-perspective inhibition demands, showing a selective deficit in inhibiting self-perspective. WBA also made egocentric errors in other social and visual perspective taking tasks, indicating a difficulty with belief attribution extending to the attribution of emotions, desires and visual experiences to other people. The case of WBA, together with the recent report of three patients impaired in belief reasoning even when self-perspective inhibition demands were reduced, provide the first neuropsychological evidence that the inhibition of one's own point of view and the ability to infer someone else's point of view rely on distinct neural and functional processes.

The impact of taking or not taking ARVs on HIV stigma as reported by persons living with HIV infection in five African countries.

PubMed

Makoae, Lucy N; Portillo, Carmen J; Uys, Leana R; Dlamini, Priscilla S; Greeff, Minrie; Chirwa, Maureen; Kohi, Thecla W; Naidoo, Joanne; Mullan, Joseph; Wantland, Dean; Durrheim, Kevin; Holzemer, William L

2009-11-01

This study examined the impact of taking or not taking antiretroviral (ARV) medications on stigma, as reported by people living with HIV infection in five African countries. A two group (taking or not taking ARVs) by three (time) repeated measures analysis of variance examined change in reported stigma in a cohort sample of 1454 persons living with HIV infection in Lesotho, Malawi, South Africa, Swaziland, and Tanzania. Participants self-reported taking ARV medications and completed a standardized stigma scale validated in the African context. Data were collected at three points in time, from January 2006 to March 2007. Participants taking ARV medications self-reported a mean CD4 count of 273 and those not taking ARVs self-reported a mean CD4 count of 418. Both groups reported significant decreases in total HIV stigma over time; however, people taking ARVs reported significantly higher stigma at Time 3 compared to those not taking ARVs. This study documents that this sample of 1454 HIV infected persons in five countries in Africa reported significantly less HIV stigma over time. In addition, those participants taking ARV medications experienced significantly higher HIV stigma over time compared to those not taking ARVs. This finding contradicts some authors' opinions that when clients enroll in ARV medication treatment it signifies that they are experiencing less stigma. This work provides caution to health care providers to alert clients new to ARV treatment that they may experience more stigma from their families and communities when they learn they are taking ARV medications.

4D visualization of embryonic, structural crystallization by single-pulse microscopy

PubMed Central

Kwon, Oh-Hoon; Barwick, Brett; Park, Hyun Soon; Baskin, J. Spencer; Zewail, Ahmed H.

2008-01-01

In many physical and biological systems the transition from an amorphous to ordered native structure involves complex energy landscapes, and understanding such transformations requires not only their thermodynamics but also the structural dynamics during the process. Here, we extend our 4D visualization method with electron imaging to include the study of irreversible processes with a single pulse in the same ultrafast electron microscope (UEM) as used before in the single-electron mode for the study of reversible processes. With this augmentation, we report on the transformation of amorphous to crystalline structure with silicon as an example. A single heating pulse was used to initiate crystallization from the amorphous phase while a single packet of electrons imaged selectively in space the transformation as the structure continuously changes with time. From the evolution of crystallinity in real time and the changes in morphology, for nanosecond and femtosecond pulse heating, we describe two types of processes, one that occurs at early time and involves a nondiffusive motion and another that takes place on a longer time scale. Similar mechanisms of two distinct time scales may perhaps be important in biomolecular folding. PMID:18562291

Data Preparation Process for the Buildings Performance Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, Travis; Dunn, Laurel; Mercado, Andrea

2014-06-30

The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation processmore » takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.« less

Real-time field programmable gate array architecture for computer vision

NASA Astrophysics Data System (ADS)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2001-01-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low-level image processing. The field programmable gate array (FPGA)-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and it is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on dedicated very- large-scale-integrated devices to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real-time performance are discussed. Some results are presented and discussed.

Quantum transfer energy in the framework of time-dependent dipole-dipole interaction

NASA Astrophysics Data System (ADS)

El-Shishtawy, Reda M.; Haddon, Robert C.; Al-Heniti, Saleh H.; Raffah, Bahaaudin M.; Berrada, K.; Abdel-Khalek, S.; Al-Hadeethi, Yas F.

2018-03-01

In this work, we examine the process of the quantum transfer of energy considering time-dependent dipole-dipole interaction in a dimer system characterized by two-level atom systems. By taking into account the effect of the acceleration and speed of the atoms in the dimer coupling, we demonstrate that the improvement of the probability for a single-excitation transfer energy extremely benefits from the incorporation of atomic motion effectiveness and the energy detuning. We explore the relevance between the population and entanglement during the time-evolution and show that this kind of nonlocal correlation may be generated during the process of the transfer of energy. Our work may provide optimal conditions to implement realistic experimental scenario in the transfer of the quantum energy.

The nuts and bolts of evaluating science communication activities.

PubMed

Spicer, Suzanne

2017-10-01

Since 2008 there has been a focus on fostering a culture of public engagement in higher education plus an impact agenda that demands scientists provide evidence of how their work, including their science communication, is making a difference. Good science communication takes a significant amount of time to plan and deliver so how can you improve what you are doing and demonstrate if you are having an impact? The answer is to evaluate. Effective evaluation needs to be planned so this paper takes you step by step through the evaluation process, illustrated using specific examples. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Data processing, multi-omic pathway mapping, and metabolite activity analysis using XCMS Online

PubMed Central

Forsberg, Erica M; Huan, Tao; Rinehart, Duane; Benton, H Paul; Warth, Benedikt; Hilmers, Brian; Siuzdak, Gary

2018-01-01

Systems biology is the study of complex living organisms, and as such, analysis on a systems-wide scale involves the collection of information-dense data sets that are representative of an entire phenotype. To uncover dynamic biological mechanisms, bioinformatics tools have become essential to facilitating data interpretation in large-scale analyses. Global metabolomics is one such method for performing systems biology, as metabolites represent the downstream functional products of ongoing biological processes. We have developed XCMS Online, a platform that enables online metabolomics data processing and interpretation. A systems biology workflow recently implemented within XCMS Online enables rapid metabolic pathway mapping using raw metabolomics data for investigating dysregulated metabolic processes. In addition, this platform supports integration of multi-omic (such as genomic and proteomic) data to garner further systems-wide mechanistic insight. Here, we provide an in-depth procedure showing how to effectively navigate and use the systems biology workflow within XCMS Online without a priori knowledge of the platform, including uploading liquid chromatography (LCLC)–mass spectrometry (MS) data from metabolite-extracted biological samples, defining the job parameters to identify features, correcting for retention time deviations, conducting statistical analysis of features between sample classes and performing predictive metabolic pathway analysis. Additional multi-omics data can be uploaded and overlaid with previously identified pathways to enhance systems-wide analysis of the observed dysregulations. We also describe unique visualization tools to assist in elucidation of statistically significant dysregulated metabolic pathways. Parameter input takes 5–10 min, depending on user experience; data processing typically takes 1–3 h, and data analysis takes ~30 min. PMID:29494574

Taking Root: a grounded theory on evidence-based nursing implementation in China.

PubMed

Cheng, L; Broome, M E; Feng, S; Hu, Y

2018-06-01

Evidence-based nursing is widely recognized as the critical foundation for quality care. To develop a middle-range theory on the process of evidence-based nursing implementation in Chinese context. A grounded theory study using unstructured in-depth individual interviews was conducted with 56 participants who were involved in 24 evidence-based nursing implementation projects in Mainland China from September 2015 to September 2016. A middle-range grounded theory of 'Taking Root' was developed. The theory describes the evidence implementation process consisting of four components (driving forces, process, outcome, sustainment/regression), three approaches (top-down, bottom-up and outside-in), four implementation strategies (patient-centred, nurses at the heart of change, reaching agreement, collaboration) and two patterns (transformational and adaptive implementation). Certain perspectives may have not been captured, as the retrospective nature of the interviewing technique did not allow for 'real-time' assessment of the actual implementation process. The transferability of the findings requires further exploration as few participants with negative experiences were recruited. This is the first study that explored evidence-based implementation process, strategies, approaches and patterns in the Chinese nursing practice context to inform international nursing and health policymaking. The theory of Taking Root described various approaches to evidence implementation and how the implementation can be transformational for the nurses and the setting in which they work. Nursing educators, managers and researchers should work together to improve nurses' readiness for evidence implementation. Healthcare systems need to optimize internal mechanisms and external collaborations to promote nursing practice in line with evidence and achieve clinical outcomes and sustainability. © 2017 International Council of Nurses.

Stroke patients' experiences of return to work.

PubMed

Medin, Jennie; Barajas, Josefin; Ekberg, Kerstin

2006-09-15

Purpose. The aim of this study was to describe the experience of return to work (RTW) after stroke from the patient's perspective.Method. Six patients who had their first ever stroke in 2001, were <65 years of age and were working at the time of their stroke were included. Information was obtained via an open-ended interview. The material was transcribed verbatim and analysed using Giorgi's empirical phenomenology.Results. Rehabilitation was perceived as primarily aimed at restoring bodily functions and a return to everyday activities, rather than at promoting a return to work. It was not experienced as adapted to the participants' needs or their age. The workplace was experienced as very important in the rehabilitation process. When the informants experienced that the rehabilitation professionals were not taking action, they took control of the situation themselves. The informants expressed pride in their own capacity to take the initiative and in their ability to take action. Both self-employed and employed informants said they had possibilities and opportunities to take action since their work situation was flexible. The informants' adaptation to a new role at work was perceived as facilitated by the understanding and positive attitude of co-workers.Conclusion. Among this group of stroke patients, the individual patient's capacity and ability to return to work was enhanced by motivation or "will" and self-efficacy in combination with external support. Self-efficacy was not only a personal trait or internal factor; it was enhanced and encouraged in interaction with contextual conditions. There are similarities between the RTW process and processes of health promotion.

Auditory-motor entrainment and phonological skills: precise auditory timing hypothesis (PATH).

PubMed

Tierney, Adam; Kraus, Nina

2014-01-01

Phonological skills are enhanced by music training, but the mechanisms enabling this cross-domain enhancement remain unknown. To explain this cross-domain transfer, we propose a precise auditory timing hypothesis (PATH) whereby entrainment practice is the core mechanism underlying enhanced phonological abilities in musicians. Both rhythmic synchronization and language skills such as consonant discrimination, detection of word and phrase boundaries, and conversational turn-taking rely on the perception of extremely fine-grained timing details in sound. Auditory-motor timing is an acoustic feature which meets all five of the pre-conditions necessary for cross-domain enhancement to occur (Patel, 2011, 2012, 2014). There is overlap between the neural networks that process timing in the context of both music and language. Entrainment to music demands more precise timing sensitivity than does language processing. Moreover, auditory-motor timing integration captures the emotion of the trainee, is repeatedly practiced, and demands focused attention. The PATH predicts that musical training emphasizing entrainment will be particularly effective in enhancing phonological skills.

InSAR Deformation Time Series Processed On-Demand in the Cloud

NASA Astrophysics Data System (ADS)

Horn, W. B.; Weeden, R.; Dimarchi, H.; Arko, S. A.; Hogenson, K.

2017-12-01

During this past year, ASF has developed a cloud-based on-demand processing system known as HyP3 (http://hyp3.asf.alaska.edu/), the Hybrid Pluggable Processing Pipeline, for Synthetic Aperture Radar (SAR) data. The system makes it easy for a user who doesn't have the time or inclination to install and use complex SAR processing software to leverage SAR data in their research or operations. One such processing algorithm is generation of a deformation time series product, which is a series of images representing ground displacements over time, which can be computed using a time series of interferometric SAR (InSAR) products. The set of software tools necessary to generate this useful product are difficult to install, configure, and use. Moreover, for a long time series with many images, the processing of just the interferograms can take days. Principally built by three undergraduate students at the ASF DAAC, the deformation time series processing relies the new Amazon Batch service, which enables processing of jobs with complex interconnected dependencies in a straightforward and efficient manner. In the case of generating a deformation time series product from a stack of single-look complex SAR images, the system uses Batch to serialize the up-front processing, interferogram generation, optional tropospheric correction, and deformation time series generation. The most time consuming portion is the interferogram generation, because even for a fairly small stack of images many interferograms need to be processed. By using AWS Batch, the interferograms are all generated in parallel; the entire process completes in hours rather than days. Additionally, the individual interferograms are saved in Amazon's cloud storage, so that when new data is acquired in the stack, an updated time series product can be generated with minimal addiitonal processing. This presentation will focus on the development techniques and enabling technologies that were used in developing the time series processing in the ASF HyP3 system. Data and process flow from job submission through to order completion will be shown, highlighting the benefits of the cloud for each step.

Generalized fractional diffusion equations for accelerating subdiffusion and truncated Lévy flights

NASA Astrophysics Data System (ADS)

Chechkin, A. V.; Gonchar, V. Yu.; Gorenflo, R.; Korabel, N.; Sokolov, I. M.

2008-08-01

Fractional diffusion equations are widely used to describe anomalous diffusion processes where the characteristic displacement scales as a power of time. For processes lacking such scaling the corresponding description may be given by diffusion equations with fractional derivatives of distributed order. Such equations were introduced in A. V. Chechkin, R. Gorenflo, and I. Sokolov [Phys. Rev. E 66, 046129 (2002)] for the description of the processes getting more anomalous in the course of time (decelerating subdiffusion and accelerating superdiffusion). Here we discuss the properties of diffusion equations with fractional derivatives of the distributed order for the description of anomalous relaxation and diffusion phenomena getting less anomalous in the course of time, which we call, respectively, accelerating subdiffusion and decelerating superdiffusion. For the former process, by taking a relatively simple particular example with two fixed anomalous diffusion exponents we show that the proposed equation effectively describes the subdiffusion phenomenon with diffusion exponent varying in time. For the latter process we demonstrate by a particular example how the power-law truncated Lévy stable distribution evolves in time to the distribution with power-law asymptotics and Gaussian shape in the central part. The special case of two different orders is characteristic for the general situation in which the extreme orders dominate the asymptotics.

Method and apparatus for fault tolerance

NASA Technical Reports Server (NTRS)

Masson, Gerald M. (Inventor); Sullivan, Gregory F. (Inventor)

1993-01-01

A method and apparatus for achieving fault tolerance in a computer system having at least a first central processing unit and a second central processing unit. The method comprises the steps of first executing a first algorithm in the first central processing unit on input which produces a first output as well as a certification trail. Next, executing a second algorithm in the second central processing unit on the input and on at least a portion of the certification trail which produces a second output. The second algorithm has a faster execution time than the first algorithm for a given input. Then, comparing the first and second outputs such that an error result is produced if the first and second outputs are not the same. The step of executing a first algorithm and the step of executing a second algorithm preferably takes place over essentially the same time period.

In-line monitoring of the coffee roasting process with near infrared spectroscopy: Measurement of sucrose and colour.

PubMed

Santos, João Rodrigo; Viegas, Olga; Páscoa, Ricardo N M J; Ferreira, Isabel M P L V O; Rangel, António O S S; Lopes, João Almeida

2016-10-01

In this work, a real-time and in-situ analytical tool based on near infrared spectroscopy is proposed to predict two of the most relevant coffee parameters during the roasting process, sucrose and colour. The methodology was developed taking in consideration different coffee varieties (Arabica and Robusta), coffee origins (Brazil, East-Timor, India and Uganda) and roasting process procedures (slow and fast). All near infrared spectroscopy-based calibrations were developed resorting to partial least squares regression. The results proved the suitability of this methodology as demonstrated by range-error-ratio and coefficient of determination higher than 10 and 0.85 respectively, for all modelled parameters. The relationship between sucrose and colour development during the roasting process is further discussed, in light of designing in real-time coffee products with similar visual appearance and distinct organoleptic profile. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relaxation Time of High-Density Amorphous Ice

NASA Astrophysics Data System (ADS)

Handle, Philip H.; Seidl, Markus; Loerting, Thomas

2012-06-01

Amorphous water plays a fundamental role in astrophysics, cryoelectron microscopy, hydration of matter, and our understanding of anomalous liquid water properties. Yet, the characteristics of the relaxation processes taking place in high-density amorphous ice (HDA) are unknown. We here reveal that the relaxation processes in HDA at 110-135 K at 0.1-0.2 GPa are of collective and global nature, resembling the alpha relaxation in glassy material. Measured relaxation times suggest liquid-like relaxation characteristics in the vicinity of the crystallization temperature at 145 K. By carefully relaxing pressurized HDA for several hours at 135 K, we produce a state that is closer to the ideal glass state than all HDA states discussed so far in literature.

31 CFR 370.13 - Can time limits for taking an action on a credit entry be extended?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Can time limits for taking an action on a credit entry be extended? If we or your financial institution are delayed beyond applicable time limits in taking any action with respect to a credit entry... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Can time limits for taking an action...

Microscopic dynamics research on the "mature" process of dye-sensitized solar cells after injection of highly concentrated electrolyte.

PubMed

Liang, Zhongguan; Liu, Weiqing; Chen, Jun; Hu, Linhua; Dai, Songyuan

2015-01-21

After injection of electrolyte, the internal three-dimensional solid-liquid penetration system of dye-sensitized solar cells (DSCs) can take a period of time to reach "mature" state. This paper studies the changes of microscopic processes of DSCs including TiO2 energy-level movement, localized state distribution, charge accumulation, electron transport, and recombination dynamics, from the beginning of electrolyte injection to the time of reached mature state. The results show that the microscopic dynamics process of DSCs exhibited a time-dependent behavior and achieved maturity ∼12 h after injecting the electrolyte into DSCs. Within 0-12 h, several results were observed: (1) the conduction band edge of TiO2 moved slightly toward negative potential direction; (2) the localized states in the band gap of TiO2 was reduced according to the same distribution law; (3) the transport resistance in TiO2 film increased, and electron transport time was prolonged as the time of maturity went on, which indicated that the electron transport process is impeded gradually; (4) the recombination resistance at the TiO2/electrolyte (EL) interface increases, and electron lifetime gradually extends, therefore, the recombination process is continuously suppressed. Furthermore, results suggest that the parameters of EL/Pt-transparent conductive oxide (TCO) interface including the interfacial capacitance, electron-transfer resistance, and transfer time constant would change with time of maturity, indicating that the EL/Pt-TCO interface is a potential factor affecting the mature process of DSCs.

Neural signatures of response planning occur midway through an incoming question in conversation

PubMed Central

Bögels, Sara; Magyari, Lilla; Levinson, Stephen C.

2015-01-01

A striking puzzle about language use in everyday conversation is that turn-taking latencies are usually very short, whereas planning language production takes much longer. This implies overlap between language comprehension and production processes, but the nature and extent of such overlap has never been studied directly. Combining an interactive quiz paradigm with EEG measurements in an innovative way, we show that production planning processes start as soon as possible, that is, within half a second after the answer to a question can be retrieved (up to several seconds before the end of the question). Localization of ERP data shows early activation even of brain areas related to late stages of production planning (e.g., syllabification). Finally, oscillation results suggest an attention switch from comprehension to production around the same time frame. This perspective from interactive language use throws new light on the performance characteristics that language competence involves. PMID:26242909

A Novel User Classification Method for Femtocell Network by Using Affinity Propagation Algorithm and Artificial Neural Network

PubMed Central

Ahmed, Afaz Uddin; Tariqul Islam, Mohammad; Ismail, Mahamod; Kibria, Salehin; Arshad, Haslina

2014-01-01

An artificial neural network (ANN) and affinity propagation (AP) algorithm based user categorization technique is presented. The proposed algorithm is designed for closed access femtocell network. ANN is used for user classification process and AP algorithm is used to optimize the ANN training process. AP selects the best possible training samples for faster ANN training cycle. The users are distinguished by using the difference of received signal strength in a multielement femtocell device. A previously developed directive microstrip antenna is used to configure the femtocell device. Simulation results show that, for a particular house pattern, the categorization technique without AP algorithm takes 5 indoor users and 10 outdoor users to attain an error-free operation. While integrating AP algorithm with ANN, the system takes 60% less training samples reducing the training time up to 50%. This procedure makes the femtocell more effective for closed access operation. PMID:25133214

A novel user classification method for femtocell network by using affinity propagation algorithm and artificial neural network.

PubMed

Ahmed, Afaz Uddin; Islam, Mohammad Tariqul; Ismail, Mahamod; Kibria, Salehin; Arshad, Haslina

2014-01-01

An artificial neural network (ANN) and affinity propagation (AP) algorithm based user categorization technique is presented. The proposed algorithm is designed for closed access femtocell network. ANN is used for user classification process and AP algorithm is used to optimize the ANN training process. AP selects the best possible training samples for faster ANN training cycle. The users are distinguished by using the difference of received signal strength in a multielement femtocell device. A previously developed directive microstrip antenna is used to configure the femtocell device. Simulation results show that, for a particular house pattern, the categorization technique without AP algorithm takes 5 indoor users and 10 outdoor users to attain an error-free operation. While integrating AP algorithm with ANN, the system takes 60% less training samples reducing the training time up to 50%. This procedure makes the femtocell more effective for closed access operation.

Real-Time UV-Visible Spectroscopy Analysis of Purple Membrane-Polyacrylamide Film Formation Taking into Account Fano Line Shapes and Scattering

PubMed Central

Gomariz, María; Blaya, Salvador; Acebal, Pablo; Carretero, Luis

2014-01-01

We theoretically and experimentally analyze the formation of thick Purple Membrane (PM) polyacrylamide (PA) films by means of optical spectroscopy by considering the absorption of bacteriorhodopsin and scattering. We have applied semiclassical quantum mechanical techniques for the calculation of absorption spectra by taking into account the Fano effects on the ground state of bacteriorhodopsin. A model of the formation of PM-polyacrylamide films has been proposed based on the growth of polymeric chains around purple membrane. Experimentally, the temporal evolution of the polymerization process of acrylamide has been studied as function of the pH solution, obtaining a good correspondence to the proposed model. Thus, due to the formation of intermediate bacteriorhodopsin-doped nanogel, by controlling the polymerization process, an alternative methodology for the synthesis of bacteriorhodopsin-doped nanogels can be provided. PMID:25329473

Real-time UV-visible spectroscopy analysis of purple membrane-polyacrylamide film formation taking into account Fano line shapes and scattering.

PubMed

Gomariz, María; Blaya, Salvador; Acebal, Pablo; Carretero, Luis

2014-01-01

We theoretically and experimentally analyze the formation of thick Purple Membrane (PM) polyacrylamide (PA) films by means of optical spectroscopy by considering the absorption of bacteriorhodopsin and scattering. We have applied semiclassical quantum mechanical techniques for the calculation of absorption spectra by taking into account the Fano effects on the ground state of bacteriorhodopsin. A model of the formation of PM-polyacrylamide films has been proposed based on the growth of polymeric chains around purple membrane. Experimentally, the temporal evolution of the polymerization process of acrylamide has been studied as function of the pH solution, obtaining a good correspondence to the proposed model. Thus, due to the formation of intermediate bacteriorhodopsin-doped nanogel, by controlling the polymerization process, an alternative methodology for the synthesis of bacteriorhodopsin-doped nanogels can be provided.

[Quality anlysis of the before redrying raw tobacco & after redrying sheet tobacco by using online near infrared spectroscopy].

PubMed

Tang, Zhao-qi; Liu, Ying; Shu, Ru-xin; Yang, Kai; Zhao, Long-lian; Zhang, Lu-da; Zhang Ye-hui; Li, Jun-hui

2014-12-01

In this paper, the 7 different origin before redrying raw tobacco & after redrying sheet tobacco's online near infrared spectroscopy were collected from sorting & redrying production line specifically for "ZHONGHUA" brand. By using the projection model bulit by different origin tobacco's online spectroscopy and the method of variance and correlation analysis, we studied the uniformity and similarity quality characteristics change before and after the redrying of tobacco, which can provide support for understanding the quality of the tobacco material and cigarette product formulations. This study show that selecting about 10,000 by equally spaced sampling time from a huge number of online near infrared spectroscopy, for modeling are feasible, and representative. After manual sorting, threshing, and redrying, the uiformity of each origin tobacco near-infrared spectroscopy can be increased by 10%~35%, homogeneity of the tobacco leaf has been significantly improved. After redrying, the similar relationship embodied in the origin also have significant changes, overall it reduce significantly, that shows the quality differences embodied by origin significantly improve, which can provide greater space for formulations, it shows the need for high-quality Chinese cigarette production requires large amounts of financial and human resources to implement cured tobacco processing. The traditional means of chemical analysis, it takes a lot of time and effort, it is difficult to control the entire processing chain, Near Infrared Spectroscopy with its rapid, non-destructive advantage, not only can achieve real-time detection and quality control, but also can take full advantage of near-infrared spectroscopy information created in the production process, which is a very promising online analytical detection technology in many industries especially in the agricultural and food processing industries.

49 CFR 40.63 - What steps does the collector take in the collection process before the employee provides a urine...

Code of Federal Regulations, 2011 CFR

2011-10-01

... collection process before the employee provides a urine specimen? 40.63 Section 40.63 Transportation Office... PROGRAMS Urine Specimen Collections § 40.63 What steps does the collector take in the collection process before the employee provides a urine specimen? As the collector, you must take the following steps before...

49 CFR 40.63 - What steps does the collector take in the collection process before the employee provides a urine...

Code of Federal Regulations, 2013 CFR

2013-10-01

... collection process before the employee provides a urine specimen? 40.63 Section 40.63 Transportation Office... PROGRAMS Urine Specimen Collections § 40.63 What steps does the collector take in the collection process before the employee provides a urine specimen? As the collector, you must take the following steps before...

49 CFR 40.63 - What steps does the collector take in the collection process before the employee provides a urine...

Code of Federal Regulations, 2014 CFR

2014-10-01

... collection process before the employee provides a urine specimen? 40.63 Section 40.63 Transportation Office... PROGRAMS Urine Specimen Collections § 40.63 What steps does the collector take in the collection process before the employee provides a urine specimen? As the collector, you must take the following steps before...

49 CFR 40.63 - What steps does the collector take in the collection process before the employee provides a urine...

Code of Federal Regulations, 2012 CFR

2012-10-01

... collection process before the employee provides a urine specimen? 40.63 Section 40.63 Transportation Office... PROGRAMS Urine Specimen Collections § 40.63 What steps does the collector take in the collection process before the employee provides a urine specimen? As the collector, you must take the following steps before...

Facilitating process changes in meal delivery and radiological testing to improve inpatient insulin timing using six sigma method.

PubMed

Yamamoto, J Jay; Malatestinic, Bill; Lehman, Angela; Juneja, Rattan

2010-01-01

The objective of this project was to improve the timing of inpatient insulin administration related to meal delivery and the scheduling of radiology tests by Lean Six Sigma method. A multidisciplinary hospital team and a Six Sigma team from a pharmaceutical manufacturer collaborated to evaluate food delivery and radiology scheduling processes related to the timing of insulin administration. Key factors leading to problems within each system were addressed to improve the efficiency of each process while improving the timeliness of glucose testing and insulin administration. Standardizing the food delivery schedule and utilizing scorecards to track on-time meal deliveries to the floor enabled nursing to more accurately administer insulin in coordination with the delivery of meals. Increasing communication and restricting the scheduling of inpatient procedures during mealtimes reduced disruptions to insulin administration. Data at 6 months postimplementation demonstrated that the institution met goals for most primary outcome metrics including increasing on-time meal delivery and the proportion of patients taking insulin scheduled for radiology tests during appropriate times. By implementing the recommendations identified via Lean Six Sigma, this collaborative effort improved the timing of inpatient insulin administration related to meal delivery and radiology testing.

An efficient solution of real-time data processing for multi-GNSS network

NASA Astrophysics Data System (ADS)

Gong, Xiaopeng; Gu, Shengfeng; Lou, Yidong; Zheng, Fu; Ge, Maorong; Liu, Jingnan

2017-12-01

Global navigation satellite systems (GNSS) are acting as an indispensable tool for geodetic research and global monitoring of the Earth, and they have been rapidly developed over the past few years with abundant GNSS networks, modern constellations, and significant improvement in mathematic models of data processing. However, due to the increasing number of satellites and stations, the computational efficiency becomes a key issue and it could hamper the further development of GNSS applications. In this contribution, this problem is overcome from the aspects of both dense linear algebra algorithms and GNSS processing strategy. First, in order to fully explore the power of modern microprocessors, the square root information filter solution based on the blocked QR factorization employing as many matrix-matrix operations as possible is introduced. In addition, the algorithm complexity of GNSS data processing is further decreased by centralizing the carrier-phase observations and ambiguity parameters, as well as performing the real-time ambiguity resolution and elimination. Based on the QR factorization of the simulated matrix, we can conclude that compared to unblocked QR factorization, the blocked QR factorization can greatly improve processing efficiency with a magnitude of nearly two orders on a personal computer with four 3.30 GHz cores. Then, with 82 globally distributed stations, the processing efficiency is further validated in multi-GNSS (GPS/BDS/Galileo) satellite clock estimation. The results suggest that it will take about 31.38 s per epoch for the unblocked method. While, without any loss of accuracy, it only takes 0.50 and 0.31 s for our new algorithm per epoch for float and fixed clock solutions, respectively.

Nuclear Structure Aspects in Nuclear Astrophysics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Michael Scott

2006-12-01

Nuclear Astrophysics as a broad and diverse field of study can be viewed as a magnifier of the impact of microscopic processes on the evolution of macroscopic events. One of the primary goals in Nuclear Astrophysics is the understanding of the nucleosynthesis processes that take place in the cosmos and the simulation of the correlated stellar and explosive burning scenarios. These simulations are strongly dependent on the input from Nuclear Physics which sets the time scale for all stellar dynamic processes--from giga-years of stellar evolution to milliseconds of stellar explosions--and provides the basis for most of the signatures that wemore » have for the interpretation of these events--from stellar luminosities, elemental and isotopic abundances to neutrino flux from distant supernovae. The Nuclear Physics input comes through nuclear structure, low energy reaction rates, nuclear masses, and decay rates. There is a common perception that low energy reaction rates are the most important component of the required nuclear physics input; however, in this article we take a broader approach and present an overview of the close correlation between various nuclear structure aspects and their impact on nuclear astrophysics. We discuss the interplay between the weak and the strong forces on stellar time scales due to the limitations they provide for the evolution of slow and rapid burning processes. The effects of shell structure in nuclei on stellar burning processes as well as the impact of clustering in nuclei is outlined. Furthermore we illustrate the effects of the various nuclear structure aspects on the major nucleosynthesis processes that have been identified in the last few decades. We summarize and provide a coherent overview of the impact of all aspects of nuclear structure on nuclear astrophysics.« less

Computer simulations of structural transitions in large ferrofluid aggregates

NASA Astrophysics Data System (ADS)

Yoon, Mina; Tomanek, David

2003-03-01

We have developed a quaternion molecular dynamics formalism to study structural transitions in systems of ferrofluid particles in colloidal suspensions. Our approach takes advantage of the viscous damping provided by the surrounding liquid and enables us to study the time evolution of these systems over milli-second time periods as a function of the number of particles, initial geometry, and an externally applied magnetic field. Our computer simulations for aggregates containing tens to hundreds of ferrofluid particles suggest that these systems relax to the global optimum structure in a step-wise manner. During the relaxation process, the potential energy decreases by two mechanisms, which occur on different time scales. Short time periods associated with structural relaxations within a given morphology are followed by much slower processes that generally lead to a simpler morphology. We discuss possible applications of these externally driven structural transitions for targeted medication delivery.

NasoNet, modeling the spread of nasopharyngeal cancer with networks of probabilistic events in discrete time.

PubMed

Galán, S F; Aguado, F; Díez, F J; Mira, J

2002-07-01

The spread of cancer is a non-deterministic dynamic process. As a consequence, the design of an assistant system for the diagnosis and prognosis of the extent of a cancer should be based on a representation method that deals with both uncertainty and time. The ultimate goal is to know the stage of development of a cancer in a patient before selecting the appropriate treatment. A network of probabilistic events in discrete time (NPEDT) is a type of Bayesian network for temporal reasoning that models the causal mechanisms associated with the time evolution of a process. This paper describes NasoNet, a system that applies NPEDTs to the diagnosis and prognosis of nasopharyngeal cancer. We have made use of temporal noisy gates to model the dynamic causal interactions that take place in the domain. The methodology we describe is general enough to be applied to any other type of cancer.

Dragon Stream Cipher for Secure Blackbox Cockpit Voice Recorder

NASA Astrophysics Data System (ADS)

Akmal, Fadira; Michrandi Nasution, Surya; Azmi, Fairuz

2017-11-01

Aircraft blackbox is a device used to record all aircraft information, which consists of Flight Data Recorder (FDR) and Cockpit Voice Recorder (CVR). Cockpit Voice Recorder contains conversations in the aircraft during the flight.Investigations on aircraft crashes usually take a long time, because it is difficult to find the aircraft blackbox. Then blackbox should have the ability to send information to other places. Aircraft blackbox must have a data security system, data security is a very important part at the time of information exchange process. The system in this research is to perform the encryption and decryption process on Cockpit Voice Recorder by people who are entitled by using Dragon Stream Cipher algorithm. The tests performed are time of data encryption and decryption, and avalanche effect. Result in this paper show us time encryption and decryption are 0,85 seconds and 1,84 second for 30 seconds Cockpit Voice Recorder data witn an avalanche effect 48,67 %.

36 CFR 1202.44 - How long will it take for NARA to process my request?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How long will it take for NARA to process my request? 1202.44 Section 1202.44 Parks, Forests, and Public Property NATIONAL... Individual Access to Records § 1202.44 How long will it take for NARA to process my request? (a) NARA will...

Process Mining Methodology for Health Process Tracking Using Real-Time Indoor Location Systems.

PubMed

Fernandez-Llatas, Carlos; Lizondo, Aroa; Monton, Eduardo; Benedi, Jose-Miguel; Traver, Vicente

2015-11-30

The definition of efficient and accurate health processes in hospitals is crucial for ensuring an adequate quality of service. Knowing and improving the behavior of the surgical processes in a hospital can improve the number of patients that can be operated on using the same resources. However, the measure of this process is usually made in an obtrusive way, forcing nurses to get information and time data, affecting the proper process and generating inaccurate data due to human errors during the stressful journey of health staff in the operating theater. The use of indoor location systems can take time information about the process in an unobtrusive way, freeing nurses, allowing them to engage in purely welfare work. However, it is necessary to present these data in a understandable way for health professionals, who cannot deal with large amounts of historical localization log data. The use of process mining techniques can deal with this problem, offering an easily understandable view of the process. In this paper, we present a tool and a process mining-based methodology that, using indoor location systems, enables health staff not only to represent the process, but to know precise information about the deployment of the process in an unobtrusive and transparent way. We have successfully tested this tool in a real surgical area with 3613 patients during February, March and April of 2015.

Process Mining Methodology for Health Process Tracking Using Real-Time Indoor Location Systems

PubMed Central

Fernandez-Llatas, Carlos; Lizondo, Aroa; Monton, Eduardo; Benedi, Jose-Miguel; Traver, Vicente

2015-01-01

The definition of efficient and accurate health processes in hospitals is crucial for ensuring an adequate quality of service. Knowing and improving the behavior of the surgical processes in a hospital can improve the number of patients that can be operated on using the same resources. However, the measure of this process is usually made in an obtrusive way, forcing nurses to get information and time data, affecting the proper process and generating inaccurate data due to human errors during the stressful journey of health staff in the operating theater. The use of indoor location systems can take time information about the process in an unobtrusive way, freeing nurses, allowing them to engage in purely welfare work. However, it is necessary to present these data in a understandable way for health professionals, who cannot deal with large amounts of historical localization log data. The use of process mining techniques can deal with this problem, offering an easily understandable view of the process. In this paper, we present a tool and a process mining-based methodology that, using indoor location systems, enables health staff not only to represent the process, but to know precise information about the deployment of the process in an unobtrusive and transparent way. We have successfully tested this tool in a real surgical area with 3613 patients during February, March and April of 2015. PMID:26633395

Parallel constraint satisfaction in memory-based decisions.

PubMed

Glöckner, Andreas; Hodges, Sara D

2011-01-01

Three studies sought to investigate decision strategies in memory-based decisions and to test the predictions of the parallel constraint satisfaction (PCS) model for decision making (Glöckner & Betsch, 2008). Time pressure was manipulated and the model was compared against simple heuristics (take the best and equal weight) and a weighted additive strategy. From PCS we predicted that fast intuitive decision making is based on compensatory information integration and that decision time increases and confidence decreases with increasing inconsistency in the decision task. In line with these predictions we observed a predominant usage of compensatory strategies under all time-pressure conditions and even with decision times as short as 1.7 s. For a substantial number of participants, choices and decision times were best explained by PCS, but there was also evidence for use of simple heuristics. The time-pressure manipulation did not significantly affect decision strategies. Overall, the results highlight intuitive, automatic processes in decision making and support the idea that human information-processing capabilities are less severely bounded than often assumed.

Effect of pumping delay on the modulation bandwidth in double tunneling-injection quantum dot lasers.

PubMed

Asryan, Levon V

2017-01-01

The modulation bandwidth of double tunneling-injection (DTI) quantum dot (QD) lasers is studied, taking into account noninstantaneous pumping of QDs. In this advanced type of semiconductor lasers, carriers are first captured from the bulk waveguide region into two-dimensional regions (quantum wells [QWs]); then they tunnel from the QWs into zero-dimensional regions (QDs). The two processes are noninstantaneous and, thus, could delay the delivery of the carriers to the QDs. Here, the modulation bandwidth of DTI QD lasers is calculated as a function of two characteristic times (the capture time from the waveguide region into the QW and the tunneling time from the QW into the QD ensemble) and is shown to increase as either of these times is reduced. The capture and tunneling times of 1 and 0.1 ps, respectively, are shown to characterize fast capture and tunneling processes; as the capture and tunneling times are brought below 1 and 0.1 ps, the bandwidth remains almost unchanged and close to its upper limit.

Time and moral judgment.

PubMed

Suter, Renata S; Hertwig, Ralph

2011-06-01

Do moral judgments hinge on the time available to render them? According to a recent dual-process model of moral judgment, moral dilemmas that engage emotional processes are likely to result in fast deontological gut reactions. In contrast, consequentialist responses that tot up lives saved and lost in response to such dilemmas would require cognitive control to override the initial response. Cognitive control, however, takes time. In two experiments, we manipulated the time available to arrive at moral judgments in two ways: by allotting a fixed short or large amount of time, and by nudging people to answer swiftly or to deliberate thoroughly. We found that faster responses indeed lead to more deontological responses among those moral dilemmas in which the killing of one to save many necessitates manhandling an innocent person and in which this action is depicted as a means to an end. Thus, our results are the first demonstration that inhibiting cognitive control through manipulations of time alters moral judgments. Copyright © 2011 Elsevier B.V. All rights reserved.

Identification of Conflicting Questions in the PARES System

ERIC Educational Resources Information Center

Tsinakos, Avgoustos; Kazanidis, Ioannis

2012-01-01

Student testing and knowledge assessment is a significant aspect of the learning process. In a number of cases, it is expedient not to present the exact same test to all learners all the time (Pritchett, 1999). This may be desired so that cheating in the exam is made harder to carry out or so that the learners can take several practice tests on…

36 CFR 1250.26 - How quickly will NARA respond to my FOIA request?

Code of Federal Regulations, 2010 CFR

2010-07-01

... making a decision within 20 working days, we will inform you in writing how long it will take us to... requesters of any complexity in processing their request, which may lengthen the time required to reach a final decision on the release of the records. (b) In most cases, NARA will make a decision on the...

How Availability of Capital Affects the Timing of Enrollment: The Routes to University of Traditional and Non-Traditional Students

ERIC Educational Resources Information Center

Brändle, Tobias

2017-01-01

In the aftermath of the Bologna Process, Germany decided to open universities for individuals who do not possess a scholastic university entrance qualification but completed vocational education. This paper questions how long it takes until these so-called non-traditional students enroll and compares their routes to university to the routes of…

Levers for Sustainable Improvement of Spanish Schools in Challenging Contexts

ERIC Educational Resources Information Center

Lopez-Yanez, Julian; Sanchez-Moreno, Marita

2013-01-01

The need for innovation in the Spanish educational system has become more evident in the wake of the last PISA reports. To find our own way to achieve better schools we "must" take advantage of what schools that managed to sustain changes over time have learnt from such a process. This paper reports on findings from an inquiry that tried…

Mary, Mary Quite Contrary How Does Your Garden Grow? Creating the Creative School Garden

ERIC Educational Resources Information Center

Egan, Padraig

2017-01-01

Plants and the outdoors may be something of a mystery to a generation of children who are reportedly spending more and more time indoors; this has the potential to inhibit real understanding of many complex biological processes. Taking children outdoors introduces them to a world from which they are becoming increasingly distant. However, a…

Designing and Proposing Your Research Project. Concise Guides to Conducting Behavioral, Health, and Social Science Research Series

ERIC Educational Resources Information Center

Urban, Jennifer Brown; van Eeden-Moorefield, Bradley Matheus

2017-01-01

Designing your own study and writing your research proposal takes time, often more so than conducting the study. This practical, accessible guide walks you through the entire process. You will learn to identify and narrow your research topic, develop your research question, design your study, and choose appropriate sampling and measurement…

24 CFR 903.17 - What is the process for obtaining public comment on the plans?

Code of Federal Regulations, 2010 CFR

2010-04-01

..., as applicable) and invite public comment on the plan(s). The hearing must be conducted at a location..., and that a public hearing will take place on the plan, and the date, time and location of the hearing... public comment on the plans? 903.17 Section 903.17 Housing and Urban Development Regulations Relating to...

First LHCb measurement with data from the LHC Run 2

NASA Astrophysics Data System (ADS)

Anderlini, L.; Amerio, S.

2017-01-01

LHCb has recently introduced a novel real-time detector alignment and calibration strategy for the Run 2. Data collected at the start of each LHC fill are processed in few minutes and used to update the alignment. On the other hand, the calibration constants will be evaluated for each run of data taking. An increase in the CPU and disk capacity of the event filter farm, combined with improvements to the reconstruction software, allow for efficient, exclusive selections already in the first stage of the High Level Trigger (HLT1), while the second stage, HLT2, performs complete, offline-quality, event reconstruction. In Run 2, LHCb will collect the largest data sample of charm mesons ever recorded. Novel data processing and analysis techniques are required to maximise the physics potential of this data sample with the available computing resources, taking into account data preservation constraints. In this write-up, we describe the full analysis chain used to obtain important results analysing the data collected in proton-proton collisions in 2015, such as the J/ψ and open charm production cross-sections, and consider the further steps required to obtain real-time results after the LHCb upgrade.

Absorption Kinetics of Phage Lambda on Its Host Under Shear Flow

NASA Astrophysics Data System (ADS)

Yip, C. W.; Wu, X. L.

2000-03-01

Classical blender experiment by Hershey and Chase played a seminal role in illustrating the infectious process of bacteriophage to its host, and showed unequivocally that DNA is responsible for the transmission of heredity. Subsequent works by others have established that interaction between phage particles and bacterial cells is a diffusion-limited process in that, statistically speaking, each collision results in an irreversible infection. However, such a result is hard to reconcile with the fact that the infection appears to be independent of the density of phage receptors on the bacterial cell membrane. Thus, quantitative experiments showing how a phage finds its receptor and how long does it take would be valuable to this paradoxical view. Simple calculations based on Brownian motion of the phage particles show that the interaction time between the receptor and the phage is given by tau=b^2/(5D), where b is the length of the phage and D is its diffusion coefficient. Using a shear flow apparatus we study absorption kinetics of lambda phage on E. Coli (strain YMEL) under different flow conditions, and the results are compared with a simple diffusion model taking into account the hydrodynamic convection and the interaction time tau.

The dentist's care-taking perspective of dental fear patients - a continuous and changing challenge.

PubMed

Gyllensvärd, K; Qvarnström, M; Wolf, E

2016-08-01

The aim was to analyse the care taking of dental fear patients from the perspective of the dentist, using a qualitative methodology. In total, 11 dentists from both the private and public dental service were selected through a purposive sampling according to their experience of treating dental fear patients, their gender, age, service affiliation and location of undergraduate education. Data were obtained using one semi-structured interview with each informant. The interviews were taped and verbatim transcribed. The text was analysed using qualitative content analysis. The theme, 'The transforming autodidactic process of care taking', covering the interpretative level of data content was identified. The first main category covering the descriptive level of data was 'The continuous and changing challenge', with the subcategories 'The emotional demand' and 'The financial stress'. The second main category identified was 'The repeated collection of experience', with the subcategories 'The development of resources' and 'The emotional change'. The dentists' experience of treating dental fear patients was considered a challenging self-taught process under continuous transformation. The competence and routine platform expanded over time, parallel to a change of connected emotions from frustration towards safety, although challenges remained. © 2016 John Wiley & Sons Ltd.

The effect of concrete supplements on metacognitive regulation during learning and open-book test taking.

PubMed

Ackerman, Rakefet; Leiser, David

2014-06-01

Previous studies have suggested that when reading texts, lower achievers are more sensitive than their stronger counterparts to surface-level cues, such as graphic illustrations, and that even when uninformative, such concrete supplements tend to raise the text's subjective comprehensibility. We examined how being led astray by uninformative concrete supplements in expository texts affects achievement. We focused on the mediating role of metacognitive processes by partialling out the role of cognitive ability, as indicated by SAT scores, in accounting for the found differences between higher and lower achievers. Undergraduate students studied expository texts in their base versions or in concrete versions, including uninformative supplements, in a within-participant design. The procedure had three phases: Studying, open-book test taking, and reanswering questions of one's choice. Overall, judgements of comprehension (JCOMPs) were higher after participants studied the concrete than the base versions, and the participants benefited from the open-book test and the reanswering opportunity. An in-depth examination of time investment, JCOMP, confidence in test answers, choice of questions to reanswer, and test scores indicated that those whose metacognitive processes were more effective and goal driven achieved higher scores. The effectiveness of metacognitive processes during learning and test taking constitutes an important factor differentiating between higher and lower achievers when studying texts that include potentially misleading cues. © 2013 The British Psychological Society.

Oscillatory networks of high-level mental alignment: A perspective-taking MEG study.

PubMed

Seymour, R A; Wang, H; Rippon, G; Kessler, K

2018-08-15

Mentally imagining another's perspective is a high-level social process, reliant on manipulating internal representations of the self in an embodied manner. Recently Wang et al. (2016) showed that theta-band (3-7 Hz) brain oscillations within the right temporo-parietal junction (rTPJ) and brain regions coding for motor/body schema contribute to the process of perspective-taking. Using a similar paradigm, we set out to unravel the extended functional brain network in detail. Increasing the angle between self and other perspective was accompanied by longer reaction times and increases in theta power within rTPJ, right lateral prefrontal cortex (PFC) and right anterior cingulate cortex (ACC). Using Granger-causality, we showed that lateral PFC and ACC exert top-down influence over rTPJ, indicative of executive control processes required for managing conflicts between self and other perspectives. Finally, we quantified patterns of whole-brain phase coupling in relation to the rTPJ. Results suggest that rTPJ increases its theta-band phase synchrony with brain regions involved in mentalizing and regions coding for motor/body schema; whilst decreasing synchrony to visual regions. Implications for neurocognitive models are discussed, and it is proposed that rTPJ acts as a 'hub' to route bottom-up visual information to internal representations of the self during perspective-taking, co-ordinated by theta-band oscillations. Copyright © 2018 Elsevier Inc. All rights reserved.

Formation of nitrogen-containing oligomers by methylglyoxal and amines in simulated evaporating cloud droplets.

PubMed

De Haan, David O; Hawkins, Lelia N; Kononenko, Julia A; Turley, Jacob J; Corrigan, Ashley L; Tolbert, Margaret A; Jimenez, Jose L

2011-02-01

Reactions of methylglyoxal with amino acids, methylamine, and ammonium sulfate can take place in aqueous aerosol and evaporating cloud droplets. These processes are simulated by drying droplets and bulk solutions of these compounds (at low millimolar and 1 M concentrations, respectively) and analyzing the residuals by scanning mobility particle sizing, nuclear magnetic resonance, aerosol mass spectrometry (AMS), and electrospray ionization MS. The results are consistent with imine (but not diimine) formation on a time scale of seconds, followed by the formation of nitrogen-containing oligomers, methylimidazole, and dimethylimidazole products on a time scale of minutes to hours. Measured elemental ratios are consistent with imidazoles and oligomers being major reaction products, while effective aerosol densities suggest extensive reactions take place within minutes. These reactions may be a source of the light-absorbing, nitrogen-containing oligomers observed in urban and biomass-burning aerosol particles.

A model for the catalytic reduction of NO with CO and N desorption

NASA Astrophysics Data System (ADS)

Díaz, J. J.; Buendía, G. M.

2018-02-01

In this work we have investigated by Monte Carlo simulations the dynamical behavior of a modified Yaldram-Khan (YK) model for the catalytic reduction of NO on a surface. Our model is simulated on a square lattice and includes the individual desorption of CO molecules and N atoms, processes associated with temperature effects. When CO desorption is added, strong fluctuations appear, which are associated with the spreading of N checkerboard structures on the surface. These structures take a long time to coalesce, allowing the existence of a unsteady but long lasting reactive state. N desorption also favors the reactivity of the system, this time by diminishing the size of the N structures and impeding their coalescence. The combined desorption of CO and N produces a reactive state as well, where reactive zones among N structures can take place on the surface.

Healthcare4VideoStorm: Making Smart Decisions Based on Storm Metrics.

PubMed

Zhang, Weishan; Duan, Pengcheng; Chen, Xiufeng; Lu, Qinghua

2016-04-23

Storm-based stream processing is widely used for real-time large-scale distributed processing. Knowing the run-time status and ensuring performance is critical to providing expected dependability for some applications, e.g., continuous video processing for security surveillance. The existing scheduling strategies' granularity is too coarse to have good performance, and mainly considers network resources without computing resources while scheduling. In this paper, we propose Healthcare4Storm, a framework that finds Storm insights based on Storm metrics to gain knowledge from the health status of an application, finally ending up with smart scheduling decisions. It takes into account both network and computing resources and conducts scheduling at a fine-grained level using tuples instead of topologies. The comprehensive evaluation shows that the proposed framework has good performance and can improve the dependability of the Storm-based applications.

A Core Plug and Play Architecture for Reusable Flight Software Systems

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan

2006-01-01

The Flight Software Branch, at Goddard Space Flight Center (GSFC), has been working on a run-time approach to facilitate a formal software reuse process. The reuse process is designed to enable rapid development and integration of high-quality software systems and to more accurately predict development costs and schedule. Previous reuse practices have been somewhat successful when the same teams are moved from project to project. But this typically requires taking the software system in an all-or-nothing approach where useful components cannot be easily extracted from the whole. As a result, the system is less flexible and scalable with limited applicability to new projects. This paper will focus on the rationale behind, and implementation of the run-time executive. This executive is the core for the component-based flight software commonality and reuse process adopted at Goddard.

Stability and Change in Risk-Taking Propensity Across the Adult Lifespan

PubMed Central

Josef, Anika K.; Richter, David; Samanez-Larkin, Gregory R.; Wagner, Gert G.; Hertwig, Ralph; Mata, Rui

2016-01-01

Can risk-taking propensity be thought of as a trait that captures individual differences across domains, measures, and time? Studying stability in risk-taking propensities across the lifespan can help to answer such questions by uncovering parallel, or divergent, trajectories across domains and measures. We contribute to this effort by using data from respondents aged 18 to 85 in the German Socio-Economic Panel Study (SOEP) and by examining (1) differential stability, (2) mean-level differences, and (3) individual-level changes in self-reported general (N = 44,076) and domain-specific (N =11,903) risk-taking propensities across adulthood. In addition, we investigate (4) the correspondence between cross-sectional trajectories of self-report and behavioral measures of social (trust game; N = 646) and nonsocial (monetary gamble; N = 433) risk taking. The results suggest that risk-taking propensity can be understood as a trait with moderate stability. Results show reliable mean-level differences across the lifespan, with risk-taking propensities typically decreasing with age, although significant variation emerges across domains and individuals. Interestingly, the mean-level trajectory for behavioral measures of social and nonsocial risk taking was similar to those obtained from self-reported risk, despite small correlations between task behavior and self-reports. Individual-level analyses suggest a link between changes in risk-taking propensities both across domains and in relation to changes in some of the Big Five personality traits. Overall, these results raise important questions concerning the role of common processes or events that shape the lifespan development of risk-taking across domains as well as other major personality facets. PMID:26820061

Innovating for cash.

PubMed

Andrew, James P; Sirkin, Harold L

2003-09-01

Despite companies' almost fanatical worship of innovation, most new products don't generate money. That's because executives don't realize that the approach they take to commercializing a new product is as important as the innovation itself. Different approaches can generate very different levels of profit. Companies tend to favor one of three different innovation approaches, each with its own investment profile, profitability pattern, risk profile, and skill requirements. Most organizations are instinctively integrators: They manage all the steps needed to take a product to market themselves. Organizations can also choose to be orchestrators: They focus on some parts of the commercialization process and depend on partners to manage the rest. And finally, companies can be licensers: They sell or license a new product or idea to another organization that handles the commercialization process. Different innovations require different approaches. Selecting the most suitable approach, the authors' research found, often yields two or three times the profits of the least optimal approach. Yet companies tend to rely only on the mode most familiar to them. Executives would do better to take several different factors into account before deciding which tack to take, including the industry they're trying to enter, the specific characteristics of the innovation, and the risks involved in taking the product to market. By doing so, companies can match the approach to the opportunity and reap the maximum profit. Choosing the wrong approach, like Polaroid did, for example, can lead to the failure of both the product and the company. Optimizing their approaches, as Whirlpool has done, helps ensure that companies' innovations make money.

Balloon-borne tropospheric CO2 observations over the equatorial eastern and western Pacific

NASA Astrophysics Data System (ADS)

Inai, Yoichi; Aoki, Shuji; Honda, Hideyuki; Furutani, Hiroshi; Matsumi, Yutaka; Ouchi, Mai; Sugawara, Satoshi; Hasebe, Fumio; Uematsu, Mitsuo; Fujiwara, Masatomo

2018-07-01

Vertical profiles of carbon dioxide (CO2) mixing ratio in the equatorial eastern and western Pacific were measured by newly developed balloon-borne CO2 sondes in February 2012 (two soundings) and February-March 2015 (four soundings), respectively. The 1-10 km vertically averaged CO2 mixing ratios lie between the background surface values in the Northern Hemisphere (NH) and those in the Southern Hemisphere (SH) monitored at ground-based sites during these periods. A backward trajectory analysis, taking account of convective mixing processes using geostationary satellite cloud-image data, is applied to the measured CO2 profiles to estimate the origin of the observed air masses. Air masses originating in the SH show low CO2 mixing ratios that are similar to the background values in the SH. This relationship is confirmed by a positive correlation (∼0.6) between the CO2 mixing ratio and the latitude of air mass origin which is found from trajectory calculations. This result suggests that the CO2 distribution in the troposphere over the equatorial Pacific is controlled by monthly time-scale, large-scale CO2 distribution and weekly time-scale atmospheric transport processes. Furthermore, this study shows that the combination of CO2 sonde measurements and trajectory analysis, taking account of convective mixing, is a useful tool in investigating CO2 transport processes.

A Framework for Modeling Competitive and Cooperative Computation in Retinal Processing

NASA Astrophysics Data System (ADS)

Moreno-Díaz, Roberto; de Blasio, Gabriel; Moreno-Díaz, Arminda

2008-07-01

The structure of the retina suggests that it should be treated (at least from the computational point of view), as a layered computer. Different retinal cells contribute to the coding of the signals down to ganglion cells. Also, because of the nature of the specialization of some ganglion cells, the structure suggests that all these specialization processes should take place at the inner plexiform layer and they should be of a local character, prior to a global integration and frequency-spike coding by the ganglion cells. The framework we propose consists of a layered computational structure, where outer layers provide essentially with band-pass space-time filtered signals which are progressively delayed, at least for their formal treatment. Specialization is supposed to take place at the inner plexiform layer by the action of spatio-temporal microkernels (acting very locally), and having a centerperiphery space-time structure. The resulting signals are then integrated by the ganglion cells through macrokernels structures. Practically all types of specialization found in different vertebrate retinas, as well as the quasilinear behavior in some higher vertebrates, can be modeled and simulated within this framework. Finally, possible feedback from central structures is considered. Though their relevance to retinal processing is not definitive, it is included here for the sake of completeness, since it is a formal requisite for recursiveness.

Third Party Services for Enabling Business-to-Business Interactions

NASA Astrophysics Data System (ADS)

Shrivastava, Santosh

Business-to-business (B2B) interactions concerned with the fulfilment of a given business function (e.g., order processing) requires business partners to exchange electronic business documents and to act on them. This activity can be viewed as the business partners taking part in the execution of a shared business process, where each partner is responsible for performing their part in the process. Naturally, business process executions at each partner must be coordinated at run-time to ensure that the partners are performing mutually consistent actions (e.g., the seller is not hipping a product when the corresponding order has been cancelled by the buyer). A number of factors combine to make the task of business process coordination surprisingly hard:

Adsorptive behaviour of mercury on algal biomass: competition with divalent cations and organic compounds.

PubMed

Carro, Leticia; Barriada, José L; Herrero, Roberto; Sastre de Vicente, Manuel E

2011-08-15

Biosorption processes constitute an effective technique for mercury elimination. Sorption properties of native and acid-treated Sargassum muticum have been studied. Effect of pH, initial mercury concentration and contact time studies provided fundamental information about the sorption process. This information was used as the reference values to analyse mercury sorption under competition conditions. Saline effect has shown little influence in sorption, when only electrostatic modifications took place upon salt addition. On the contrary, if mercury speciation dramatically changed owing to the addition of an electrolyte, such as in the case of chloride salt, very large modifications in mercury sorption were observed. Competition with other divalent cations or organic compounds has shown little or none effect on mercury, indicating that a different mechanism is taking place during the removal of these pollutants. Finally, continuous flow experiments have clearly shown that a reduction process is also taking place during mercury removal. This fact is not obvious to elucidate under batch sorption experiments. Scanning Electron Microscopy analysis of the surface of the materials show deposits of mercury(I) and metallic mercury which is indicative of the reduction process proposed. Copyright © 2011 Elsevier B.V. All rights reserved.

F-centers mechanism of long-term relaxation in lead zirconate-titanate based piezoelectric ceramics. 2. After-field relaxation

NASA Astrophysics Data System (ADS)

Ishchuk, V. M.; Kuzenko, D. V.

2016-08-01

The paper presents results of experimental study of the dielectric constant relaxation during aging process in Pb(Zr,Ti)O3 based solid solutions (PZT) after action of external DC electric field. The said process is a long-term one and is described by the logarithmic function of time. Reversible and nonreversible relaxation process takes place depending on the field intensity. The relaxation rate depends on the field strength also, and the said dependence has nonlinear and nonmonotonic form, if external field leads to domain disordering. The oxygen vacancies-based model for description of the long-term relaxation processes is suggested. The model takes into account the oxygen vacancies on the sample's surface ends, their conversion into F+- and F0-centers under external effects and subsequent relaxation of these centers into the simple oxygen vacancies after the action termination. F-centers formation leads to the violation of the original sample's electroneutrality, and generate intrinsic DC electric field into the sample. Relaxation of F-centers is accompanied by the reduction of the electric field, induced by them, and relaxation of the dielectric constant, as consequent effect.

The effect of hubs and shortcuts on fixation time in evolutionary graphs

NASA Astrophysics Data System (ADS)

Askari, Marziyeh; Moradi Miraghaei, Zeinab; Aghababaei Samani, Keivan

2017-07-01

How can a new species (like a gene, an idea, or a strategy) take over the whole of a population? This process, which is called fixation, is considerably affected by the structure of the population. There are two key quantities to quantify the fixation process, namely fixation probability and fixation time. Fixation probability has been vastly studied in recent years, but fixation time has not been completely explored, yet. This is because the discovery of a relationship between fixation time and network structure is quite challenging. In this paper we investigate this relationship for a number of well-known complex networks. We show that the existence of a few high-degree nodes (hubs) in the network results in a longer fixation time, while the existence of a few short-cuts decreases the fixation time. Furthermore we investigate the effect of network parameters, such as connection probability, on fixation time. We show that by increasing the density of edges, fixation time decreases for all types of studied networks. Finally, we survey the effect of rewiring probability in a Watts-Strogatz network on fixation time.

Near Real Time Review of Instrument Performance using the Airborne Data Processing and Analysis Software Package

NASA Astrophysics Data System (ADS)

Delene, D. J.

2014-12-01

Research aircraft that conduct atmospheric measurements carry an increasing array of instrumentation. While on-board personnel constantly review instrument parameters and time series plots, there are an overwhelming number of items. Furthermore, directing the aircraft flight takes up much of the flight scientist time. Typically, a flight engineer is given the responsibility of reviewing the status of on-board instruments. While major issues like not receiving data are quickly identified during a flight, subtle issues like low but believable concentration measurements may go unnoticed. Therefore, it is critical to review data after a flight in near real time. The Airborne Data Processing and Analysis (ADPAA) software package used by the University of North Dakota automates the post-processing of aircraft flight data. Utilizing scripts to process the measurements recorded by data acquisition systems enables the generation of data files within an hour of flight completion. The ADPAA Cplot visualization program enables plots to be quickly generated that enable timely review of all recorded and processed parameters. Near real time review of aircraft flight data enables instrument problems to be identified, investigated and fixed before conducting another flight. On one flight, near real time data review resulted in the identification of unusually low measurements of cloud condensation nuclei, and rapid data visualization enabled the timely investigation of the cause. As a result, a leak was found and fixed before the next flight. Hence, with the high cost of aircraft flights, it is critical to find and fix instrument problems in a timely matter. The use of a automated processing scripts and quick visualization software enables scientists to review aircraft flight data in near real time to identify potential problems.

Social Motivation: Costs and Benefits of Selfishness and Otherishness.

PubMed

Crocker, Jennifer; Canevello, Amy; Brown, Ashley A

2017-01-03

We examine recent evidence on the consequences of selfishness and otherishness for psychological well-being, physical health, and relationships. In the first sections, we consider recent evidence regarding the costs and benefits of giving time, money, and support to others and the costs and benefits of taking or receiving those things from others. Then, because the behaviors of giving and taking can be motivated either by selfish or otherish concerns, we next consider the costs and benefits of the motivation underlying giving and taking. We also examine why and for whom selfishness and otherishness have consequences for psychological well-being, physical health, and relationships. We focus on mechanisms identified in research, including intrapsychic mechanisms such as positive and negative affect, self-esteem and self-efficacy, a sense of meaning and purpose in life, and a sense of connectedness to or isolation from others, as well as interpersonal processes such as reciprocation of support and responsiveness.

Laser High-Speed Photography System Used To Take Pictures Of The Attitudes Of Flying Projectile At The Muzzle Of Heavy Calibre Gun

NASA Astrophysics Data System (ADS)

Yuren, Wang; Fang, Shao; Weiping, Sun; Xioujuan, Li; Suning, Tian; Hongyan, Li

1989-06-01

When a heavy-calibre gun is fired and a projectite is flying near the gun muzzle, velocity of the projectile is very high and firing process is accompanying with strong muzzle flash. So taking the picture of the attitudes of flying projectile at the gun muzzle is very difficult. "YDS speed Photography System" developed by our group can take the framing pictures of the attitudes of the projectile and prevent them from flash confusing at the muzzle. Since framing depends on sequential pulse of the laser and the width of the putse is very narrow, therefore the exposure time is very short and photos of high-velocity flying body taken are very clear. This paper Introduces configuration and operation principle of "YDS laser High-speed Photography System" and the fuctions of the devices in this system In addition, some experimental results are briefly introduced.

Priority-setting and hospital strategic planning: a qualitative case study.

PubMed

Martin, Douglas; Shulman, Ken; Santiago-Sorrell, Patricia; Singer, Peter

2003-10-01

To describe and evaluate the priority-setting element of a hospital's strategic planning process. Qualitative case study and evaluation against the conditions of 'accountability for reasonableness' of a strategic planning process at a large urban university-affiliated hospital. The hospital's strategic planning process met the conditions of 'accountability for reasonableness' in large part. Specifically: the hospital based its decisions on reasons (both information and criteria) that the participants felt were relevant to the hospital; the number and type of participants were very extensive; the process, decisions and reasons were well communicated throughout the organization, using multiple communication vehicles; and the process included an ethical framework linked to an effort to evaluate and improve the process. However, there were opportunities to improve the process, particularly by giving participants more time to absorb the information relevant to priority-setting decisions, more time to take difficult decisions and some means to appeal or revise decisions. A case study linked to an evaluation using 'accountability for reasonableness' can serve to improve priority-setting in the context of hospital strategic planning.

Using Dispersed Modes During Model Correlation

NASA Technical Reports Server (NTRS)

Stewart, Eric C.; Hathcock, Megan L.

2017-01-01

The model correlation process for the modal characteristics of a launch vehicle is well established. After a test, parameters within the nominal model are adjusted to reflect structural dynamics revealed during testing. However, a full model correlation process for a complex structure can take months of man-hours and many computational resources. If the analyst only has weeks, or even days, of time in which to correlate the nominal model to the experimental results, then the traditional correlation process is not suitable. This paper describes using model dispersions to assist the model correlation process and decrease the overall cost of the process. The process creates thousands of model dispersions from the nominal model prior to the test and then compares each of them to the test data. Using mode shape and frequency error metrics, one dispersion is selected as the best match to the test data. This dispersion is further improved by using a commercial model correlation software. In the three examples shown in this paper, this dispersion based model correlation process performs well when compared to models correlated using traditional techniques and saves time in the post-test analysis.

Design of the storage location based on the ABC analyses

NASA Astrophysics Data System (ADS)

Jemelka, Milan; Chramcov, Bronislav; Kříž, Pavel

2016-06-01

The paper focuses on process efficiency and saving storage costs. Maintaining inventory through putaway strategy takes personnel time and costs money. The aim is to control inventory in the best way. The ABC classification based on Villefredo Pareto theory is used for a design of warehouse layout. New design of storage location reduces the distance of fork-lifters, total costs and it increases inventory process efficiency. The suggested solutions and evaluation of achieved results are described in detail. Proposed solutions were realized in real warehouse operation.

Grain dryer temperature field analysis

NASA Astrophysics Data System (ADS)

Li, Shizhuang; Cao, Shukun; Meng, Wenjing; Ma, Lingran

2017-09-01

Taking into account the drying process in the hot air temperature on the grain temperature has a great impact, and grain temperature and determines the quality of food after baking, so in order to ensure that the grain drying temperature in the safe range, the use of ANSYS FLUENT module of grain The temperature field was simulated in the drying process. The horizontal spacing of the angle box was 200mm and the vertical spacing was 240mm. At this time, the grain temperature distribution was more uniform and the drying was more adequate.

Spaceborne Hybrid-FPGA System for Processing FTIR Data

NASA Technical Reports Server (NTRS)

Bekker, Dmitriy; Blavier, Jean-Francois L.; Pingree, Paula J.; Lukowiak, Marcin; Shaaban, Muhammad

2008-01-01

Progress has been made in a continuing effort to develop a spaceborne computer system for processing readout data from a Fourier-transform infrared (FTIR) spectrometer to reduce the volume of data transmitted to Earth. The approach followed in this effort, oriented toward reducing design time and reducing the size and weight of the spectrometer electronics, has been to exploit the versatility of recently developed hybrid field-programmable gate arrays (FPGAs) to run diverse software on embedded processors while also taking advantage of the reconfigurable hardware resources of the FPGAs.

Measurements of the center-of-mass energies at BESIII via the di-muon process

DOE PAGES

Ablikim, M.; Achasov, M. N.; Ai, X. C.; ...

2016-06-01

From 2011 to 2014, the BESIII experiment collected about 5 fb -1 data at center-of-mass energies around 4 GeV for the studies of the charmonium-like and higher excited charmonium states. By analyzing the di-muon process e +e - → γ ISR/FSRμ +μ -, the center-of-mass energies of the data samples are measured with a precision of 0.8 MeV. The center-of-mass energy is found to be stable for most of the time during data taking.

Recursive solution of number of reachable states of a simple subclass of FMS

NASA Astrophysics Data System (ADS)

Chao, Daniel Yuh

2014-03-01

This paper aims to compute the number of reachable (forbidden, live and deadlock) states for flexible manufacturing systems (FMS) without the construction of reachability graph. The problem is nontrivial and takes, in general, an exponential amount of time to solve. Hence, this paper focusses on a simple version of Systems of Simple Sequential Processes with Resources (S3PR), called kth-order system, where each resource place holds one token to be shared between two processes. The exact number of reachable (forbidden, live and deadlock) states can be computed recursively.

Chronicle of a pigmented superficial Basal cell carcinoma.

PubMed

Caucanas, Marie; Piérard-Franchimont, Claudine; Piérard, Gérald E

2012-01-01

Dermoscopic patterns of basal cell carcinoma (BCC) are well defined, but the dynamics of dermoscopic changes in time were apparently never described so far. In this paper, prominent changes were observed over a 8-week period, allowing to establish a close connection between spoke wheel areas and maple leaf-like aspects, through progressive thickening of the former ones. A chronobiological phenomenon ruling synchronous apoptosis in some of the most superficial BCC nests is suggested, leading to a wax and wane process of millimetric crusts, taking part in the spontaneous BCC regression/progression process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

The four-dimensional scattering function S(Q,w) obtained by inelastic neutron scattering measurements provides unique "dynamical fingerprints" of the spin state and interactions present in complex magnetic materials. Extracting this information however is currently a slow and complex process that may take an expert -depending on the complexity of the system- up to several weeks of painstaking work to complete. Spin Wave Genie was created to abstract and automate this process. It strives to both reduce the time to complete this analysis and make these calculations more accessible to a broader group of scientists and engineers.

The insula: a critical neural substrate for craving and drug seeking under conflict and risk

PubMed Central

Naqvi, Nasir H.; Gaznick, Natassia; Tranel, Daniel; Bechara, Antoine

2014-01-01

Drug addiction is characterized by the inability to control drug use when it results in negative consequences or conflicts with more adaptive goals. Our previous work showed that damage to the insula disrupted addiction to cigarette smoking—the first time that the insula was shown to be a critical neural substrate for addiction. Here, we review those findings, as well as more recent studies that corroborate and extend them, demonstrating the role of the insula in (1) incentive motivational processes that drive addictive behavior, (2) control processes that moderate or inhibit addictive behavior, and (3) interoceptive processes that represent bodily states associated with drug use. We then describe a theoretical framework that attempts to integrate these seemingly disparate findings. In this framework, the insula functions in the recall of interoceptive drug effects during craving and drug seeking under specific conditions where drug taking is perceived as risky and/or where there is conflict between drug taking and more adaptive goals. We describe this framework in an evolutionary context and discuss its implications for understanding the mechanisms of behavior change in addiction treatments. PMID:24690001

Playback system designed for X-Band SAR

NASA Astrophysics Data System (ADS)

Yuquan, Liu; Changyong, Dou

2014-03-01

SAR(Synthetic Aperture Radar) has extensive application because it is daylight and weather independent. In particular, X-Band SAR strip map, designed by Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences, provides high ground resolution images, at the same time it has a large spatial coverage and a short acquisition time, so it is promising in multi-applications. When sudden disaster comes, the emergency situation acquires radar signal data and image as soon as possible, in order to take action to reduce loss and save lives in the first time. This paper summarizes a type of X-Band SAR playback processing system designed for disaster response and scientific needs. It describes SAR data workflow includes the payload data transmission and reception process. Playback processing system completes signal analysis on the original data, providing SAR level 0 products and quick image. Gigabit network promises radar signal transmission efficiency from recorder to calculation unit. Multi-thread parallel computing and ping pong operation can ensure computation speed. Through gigabit network, multi-thread parallel computing and ping pong operation, high speed data transmission and processing meet the SAR radar data playback real time requirement.

An all-optronic synthetic aperture lidar

NASA Astrophysics Data System (ADS)

Turbide, Simon; Marchese, Linda; Terroux, Marc; Babin, François; Bergeron, Alain

2012-09-01

Synthetic Aperture Radar (SAR) is a mature technology that overcomes the diffraction limit of an imaging system's real aperture by taking advantage of the platform motion to coherently sample multiple sections of an aperture much larger than the physical one. Synthetic Aperture Lidar (SAL) is the extension of SAR to much shorter wavelengths (1.5 μm vs 5 cm). This new technology can offer higher resolution images in day or night time as well as in certain adverse conditions. It could be a powerful tool for Earth monitoring (ship detection, frontier surveillance, ocean monitoring) from aircraft, unattended aerial vehicle (UAV) or spatial platforms. A continuous flow of high-resolution images covering large areas would however produce a large amount of data involving a high cost in term of post-processing computational time. This paper presents a laboratory demonstration of a SAL system complete with image reconstruction based on optronic processing. This differs from the more traditional digital approach by its real-time processing capability. The SAL system is discussed and images obtained from a non-metallic diffuse target at ranges up to 3m are shown, these images being processed by a real-time optronic SAR processor origiinally designed to reconstruct SAR images from ENVISAT/ASAR data.

An SDR-Based Real-Time Testbed for GNSS Adaptive Array Anti-Jamming Algorithms Accelerated by GPU

PubMed Central

Xu, Hailong; Cui, Xiaowei; Lu, Mingquan

2016-01-01

Nowadays, software-defined radio (SDR) has become a common approach to evaluate new algorithms. However, in the field of Global Navigation Satellite System (GNSS) adaptive array anti-jamming, previous work has been limited due to the high computational power demanded by adaptive algorithms, and often lack flexibility and configurability. In this paper, the design and implementation of an SDR-based real-time testbed for GNSS adaptive array anti-jamming accelerated by a Graphics Processing Unit (GPU) are documented. This testbed highlights itself as a feature-rich and extendible platform with great flexibility and configurability, as well as high computational performance. Both Space-Time Adaptive Processing (STAP) and Space-Frequency Adaptive Processing (SFAP) are implemented with a wide range of parameters. Raw data from as many as eight antenna elements can be processed in real-time in either an adaptive nulling or beamforming mode. To fully take advantage of the parallelism resource provided by the GPU, a batched method in programming is proposed. Tests and experiments are conducted to evaluate both the computational and anti-jamming performance. This platform can be used for research and prototyping, as well as a real product in certain applications. PMID:26978363

An SDR-Based Real-Time Testbed for GNSS Adaptive Array Anti-Jamming Algorithms Accelerated by GPU.

PubMed

Xu, Hailong; Cui, Xiaowei; Lu, Mingquan

2016-03-11

Nowadays, software-defined radio (SDR) has become a common approach to evaluate new algorithms. However, in the field of Global Navigation Satellite System (GNSS) adaptive array anti-jamming, previous work has been limited due to the high computational power demanded by adaptive algorithms, and often lack flexibility and configurability. In this paper, the design and implementation of an SDR-based real-time testbed for GNSS adaptive array anti-jamming accelerated by a Graphics Processing Unit (GPU) are documented. This testbed highlights itself as a feature-rich and extendible platform with great flexibility and configurability, as well as high computational performance. Both Space-Time Adaptive Processing (STAP) and Space-Frequency Adaptive Processing (SFAP) are implemented with a wide range of parameters. Raw data from as many as eight antenna elements can be processed in real-time in either an adaptive nulling or beamforming mode. To fully take advantage of the parallelism resource provided by the GPU, a batched method in programming is proposed. Tests and experiments are conducted to evaluate both the computational and anti-jamming performance. This platform can be used for research and prototyping, as well as a real product in certain applications.

Coefficient of performance for a low-dissipation Carnot-like refrigerator with nonadiabatic dissipation

NASA Astrophysics Data System (ADS)

Hu, Yong; Wu, Feifei; Ma, Yongli; He, Jizhou; Wang, Jianhui; Hernández, A. Calvo; Roco, J. M. M.

2013-12-01

We study the coefficient of performance (COP) and its bounds for a Carnot-like refrigerator working between two heat reservoirs at constant temperatures Th and Tc, under two optimization criteria χ and Ω. In view of the fact that an “adiabatic” process usually takes finite time and is nonisentropic, the nonadiabatic dissipation and the finite time required for the adiabatic processes are taken into account by assuming low dissipation. For given optimization criteria, we find that the lower and upper bounds of the COP are the same as the corresponding ones obtained from the previous idealized models where any adiabatic process is undergone instantaneously with constant entropy. To describe some particular models with very fast adiabatic transitions, we also consider the influence of the nonadiabatic dissipation on the bounds of the COP, under the assumption that the irreversible entropy production in the adiabatic process is constant and independent of time. Our theoretical predictions match the observed COPs of real refrigerators more closely than the ones derived in the previous models, providing a strong argument in favor of our approach.

Regulation of health information processing in an outsourcing environment.

PubMed

2004-06-01

Policy makers must consider the work force, technology, cost, and legal implications of their legislative proposals. AHIMA, AAMT, CHIA, and MTIA urge lawmakers to craft regulatory solutions that enforce HIPAA and support advancements in modern health information processing practices that improve the quality and cost of healthcare. We also urge increased investment in health information work force development and implementation of new technologies to advance critical healthcare outcomes--timely, accurate, accessible, and secure information to support patient care. It is essential that state legislatures reinforce the importance of improving information processing solutions for healthcare and not take actions that will produce unintended and detrimental consequences.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaw, L. A.; Chizari, S.; Panas, R. M.

The aim of this research is to demonstrate a holographically driven photopolymerization process for joining colloidal particles to create planar microstructures fixed to a substrate, which can be monitored with real-time measurement. Holographic optical tweezers (HOT) have been used to arrange arrays of microparticles prior to this work; here we introduce a new photopolymerization process for rapidly joining simultaneously handled microspheres in a plane. Additionally, we demonstrate a new process control technique for efficiently identifying when particles have been successfully joined by measuring a sufficient reduction in the particles’ Brownian motion. Furthermore, this technique and our demonstrated joining approach enablemore » HOT technology to take critical steps toward automated additive fabrication of microstructures.« less

Process for application of powder particles to filamentary materials

NASA Technical Reports Server (NTRS)

Baucom, Robert M. (Inventor); Snoha, John J. (Inventor); Marchello, Joseph M. (Inventor)

1991-01-01

This invention is a process for the uniform application of polymer powder particles to a filamentary material in a continuous manner to form a uniform composite prepreg material. A tow of the filamentary material is fed under carefully controlled tension into a spreading unit, where it is spread pneumatically into an even band. The spread filamentary tow is then coated with polymer particles from a fluidized bed, after which the coated filamentary tow is fused before take-up on a package for subsequent utilization. This process produces a composite prepreg uniformly without imposing severe stress on the filamentary material, and without requiring long, high temperature residence times for the polymer.

Mass media in health promotion: an analysis using an extended information-processing model.

PubMed

Flay, B R; DiTecco, D; Schlegel, R P

1980-01-01

The information-processing model of the attitude and behavior change process was critically examined and extended from six to 12 levels for a better analysis of change due to mass media campaigns. Findings from social psychology and communications research, and from evaluations of mass media health promotion programs, were reviewed to determine how source, message, channel, receiver, and destination variables affect each of the levels of change of major interest (knowledge, beliefs, attitudes, intentions and behavior). Factors found to most likely induce permanent attitude and behavior change (most important in health promotion) were: presentation and repetition over long time periods, via multiple sources, at different times (including "prime" or high-exposure times), by multiple sources, in novel and involving ways, with appeals to multiple motives, development of social support, and provisions of appropriate behavioral skills, alternatives, and reinforcement (preferably in ways that get the active participation of the audience). Suggestions for evaluation of mass media programs that take account of this complexity were advanced.

Pesticide uptake in potatoes: model and field experiments.

PubMed

Juraske, Ronnie; Vivas, Carmen S Mosquera; Velásquez, Alexander Erazo; Santos, Glenda García; Moreno, Mónica B Berdugo; Gomez, Jaime Diaz; Binder, Claudia R; Hellweg, Stefanie; Dallos, Jairo A Guerrero

2011-01-15

A dynamic model for uptake of pesticides in potatoes is presented and evaluated with measurements performed within a field trial in the region of Boyacá, Colombia. The model takes into account the time between pesticide applications and harvest, the time between harvest and consumption, the amount of spray deposition on soil surface, mobility and degradation of pesticide in soil, diffusive uptake and persistence due to crop growth and metabolism in plant material, and loss due to food processing. Food processing steps included were cleaning, washing, storing, and cooking. Pesticide concentrations were measured periodically in soil and potato samples from the beginning of tuber formation until harvest. The model was able to predict the magnitude and temporal profile of the experimentally derived pesticide concentrations well, with all measurements falling within the 90% confidence interval. The fraction of chlorpyrifos applied on the field during plant cultivation that eventually is ingested by the consumer is on average 10(-4)-10(-7), depending on the time between pesticide application and ingestion and the processing step considered.

Pre-layout AC decoupling analysis with Mentor Graphics HyperLynx

NASA Astrophysics Data System (ADS)

Hnatiuc, Mihaela; Iov, Cǎtǎlin J.

2015-02-01

Considerable resources have been used since the humans got interested to discover the world around. Any discovery and science advance was taken tremendously amount of time, money, sometimes lives. All of these define the cost of a discovery, developing process. Getting back to electronics, this field faced in the last 20-30 years, a big boom in terms of technologies and opportunities. Thousands of equipment were developed and placed on the market. The big difference between various competitors is made at the moment by that we call the time to market. A mobile, for instance, has a time to market of around 6 months and the tendency is to have it smaller than that. That means between the concept and the first model sale, no more than 6 months should be passing. That is why new approaches are needed. The one extensively used now is the simulation. We call the simulation virtual prototyping. The virtual prototyping takes into account more than the components only. It takes into account some other project parameters that would affect the final product. Certified tools can handle such analysis. In our paper we present the case of HyperLynx, a concept developed by Mentor Graphics Company, assisting the hardware designer throughout the designing process, from thermal point of view. A test case board was analyzed at the pre-layout stage and the results presented.

The influence of silanized nano-SiO{sub 2} on the hydration of cement paste: NMR investigations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bede, A., E-mail: Andrea.Bede@phys.utcluj.ro; Pop, A.; Ardelean, I.

2015-12-23

It is known that by adding a small amount of nanoparticles to the cement-based materials a strong influence on the workability, strength and durability is obtained. These characteristics of the material are fundamentally determined by the hydration process taking place after mixing the cement grains with water. In the present study the influence introduced by the addition of nano-silica with silanized surfaces on the hydration process was investigated using low-field nuclear magnetic resonance (NMR) relaxometry. The cement samples were prepared using gray cement at a water-to-cement ratio of 0.4 and a 5% addition of nanosilica. The surface of the nanoparticlesmore » was modified using a coating of Silane A174. The cement pastes were monitored during their standard curing time of 28 days. It was established that, by using unmodified nanosilica particles, an acceleration of the hydration process takes place as compared with the pure cement paste. On the other side, by adding silanized nanoparticles, the dormancy stage significantly extends and the hydration process is slower. This slowing down process could enhance the mechanical strength of cement based materials as a result of a better compaction of the hydrated samples.« less

Influence of wind and river discharge on the vertical exchange process in the Pearl River Estuary

NASA Astrophysics Data System (ADS)

Hong, B.; Peng, S.

2016-02-01

Vertical exchange process is controlled by the buoyancy input from river discharge and the momentum input by wind forcing. This study investigates the vertical exchange process in the Pearl River Estuary by using a 3-D numerical model. The vertical exchange time (VET) is used to quantify the magnitude of vertical exchange process in response to changing local wind and river discharge. During the dry season, it only takes about 2 days for the surface layer water mass being transported to the bottom layer. During the wet season, such transport will take more than 20 days in a large portion of the main channel. The water in the slope area can be well ventilated. Linear regression of VET indicates that water column stratification can be used to estimate the VET and up to 71% of the variance can be accounted. The estimation by using river runoff can only account for about 49% of the variance. The effects of wind speed and direction are investigated separately. Neither river runoff nor the stratification can properly predict the VET during the typical wet season. Further investigations are needed to reveal the dynamics of vertical exchange process and find out other factors that influence the VET during the wet season.

The Theory of Active Involvement: Processes Underlying Interventions that Engage Adolescents in Message Planning and/or Production

PubMed Central

Greene, Kathryn

2013-01-01

Adolescence is a time of increased risk-taking and recent intervention strategies have included adolescents planning or producing anti-risk messages for their peers. Although these projects may generate enthusiasm, we know little about message planning or production as a strategy for changing adolescent decision-making and behavior. The paper articulates the Theory of Active Involvement (TAI) to describe and explain the processes through which these active involvement interventions influence adolescents. TAI is based on social cognitive theory’s notion of self-regulation and examines multiple perspective-taking and activating the self-reflection processes. The theory specifically describes the process of cognitive changes experienced by participants in active involvement interventions. The sequence is conceptualized as starting when engagement with the intervention (arousal and involvement) produces skill and knowledge gains (immediate outcomes) that lead to reflection (perceived discrepancy) and then other cognitions (expectancies, norms, intentions), with the ultimate outcome being behavior change. Engaging the target audience in a process of self-reflection is conceptualized as the crucial ingredient for meaningful and sustainable change in cognitions and behavior. This paper provides valuable insight into how active involvement strategies function and how to best design these interventions, particularly those targeting adolescents. PMID:23980581

The Social N400 effect: how the presence of other listeners affects language comprehension.

PubMed

Rueschemeyer, Shirley-Ann; Gardner, Tom; Stoner, Cat

2015-02-01

During conversation, it is necessary to keep track of what others can and cannot understand. Previous research has focused largely on understanding the time course along which knowledge about interlocutors influences language comprehension/production rather than the cognitive process by which interlocutors take each other's perspective. In addition, most work has looked at the effects of knowledge about a speaker on a listener's comprehension, and not on the possible effects of other listeners on a participant's comprehension process. In the current study, we introduce a novel joint comprehension paradigm that addresses the cognitive processes underlying perspective taking during language comprehension. Specifically, we show that participants who understand a language stimulus, but are simultaneously aware that someone sitting next to them does not understand the same stimulus, show an electrophysiological marker of semantic integration difficulty (i.e., an N400-effect). Crucially, in a second group of participants, we demonstrate that presenting exactly the same sentences to the participant alone (i.e. without a co-listener) results in no N400-effect. Our results suggest that (1) information about co-listeners as well as the speaker affect language comprehension, and (2) the cognitive process by which we understand what others comprehend mirrors our own language comprehension processes.

The AAL project: automated monitoring and intelligent analysis for the ATLAS data taking infrastructure

NASA Astrophysics Data System (ADS)

Kazarov, A.; Lehmann Miotto, G.; Magnoni, L.

2012-06-01

The Trigger and Data Acquisition (TDAQ) system of the ATLAS experiment at CERN is the infrastructure responsible for collecting and transferring ATLAS experimental data from detectors to the mass storage system. It relies on a large, distributed computing environment, including thousands of computing nodes with thousands of application running concurrently. In such a complex environment, information analysis is fundamental for controlling applications behavior, error reporting and operational monitoring. During data taking runs, streams of messages sent by applications via the message reporting system together with data published from applications via information services are the main sources of knowledge about correctness of running operations. The flow of data produced (with an average rate of O(1-10KHz)) is constantly monitored by experts to detect problem or misbehavior. This requires strong competence and experience in understanding and discovering problems and root causes, and often the meaningful information is not in the single message or update, but in the aggregated behavior in a certain time-line. The AAL project is meant at reducing the man power needs and at assuring a constant high quality of problem detection by automating most of the monitoring tasks and providing real-time correlation of data-taking and system metrics. This project combines technologies coming from different disciplines, in particular it leverages on an Event Driven Architecture to unify the flow of data from the ATLAS infrastructure, on a Complex Event Processing (CEP) engine for correlation of events and on a message oriented architecture for components integration. The project is composed of 2 main components: a core processing engine, responsible for correlation of events through expert-defined queries and a web based front-end to present real-time information and interact with the system. All components works in a loose-coupled event based architecture, with a message broker to centralize all communication between modules. The result is an intelligent system able to extract and compute relevant information from the flow of operational data to provide real-time feedback to human experts who can promptly react when needed. The paper presents the design and implementation of the AAL project, together with the results of its usage as automated monitoring assistant for the ATLAS data taking infrastructure.

Effects of reverberation time on the cognitive load in speech communication: theoretical considerations.

PubMed

Kjellberg, A

2004-01-01

The paper presents a theoretical analysis of possible effects of reverberation time on the cognitive load in speech communication. Speech comprehension requires not only phonological processing of the spoken words. Simultaneously, this information must be further processed and stored. All this processing takes place in the working memory, which has a limited processing capacity. The more resources that are allocated to word identification, the fewer resources are therefore left for the further processing and storing of the information. Reverberation conditions that allow the identification of almost all words may therefore still interfere with speech comprehension and memory storing. These problems are likely to be especially serious in situations where speech has to be followed continuously for a long time. An unfavourable reverberation time (RT) then could contribute to the development of cognitive fatigue, which means that working memory resources are gradually reduced. RT may also affect the cognitive load in two other ways: RT may change the distracting effects of a sound and a person's mood. Both effects could influence the cognitive load of a listener. It is argued that we need studies of RT effects in realistic long-lasting listening situations to better understand the effect of RT on speech communication. Furthermore, the effect of RT on distraction and mood need to be better understood.

Structured illumination assisted microdeflectometry with optical depth scanning capability

PubMed Central

Lu, Sheng-Huei; Hua, Hong

2018-01-01

Microdeflectometry is a powerful noncontact tool for measuring nanometer defects on a freeform surface. However, it requires a time-consuming process to take measurements at different depths for an extended depth of field (EDOF) and lacks surface information for integrating the measured gradient data to height. We propose an optical depth scanning technique to speed up the measurement process and introduce the structured illumination technique to efficiently determine the focused data among 3D observation and provide surface orientations for reconstructing an unknown surface shape. We demonstrated 3D measurements with an equivalent surface height sensitivity of 7.21 nm and an EDOF of at least 250 μm, which is 15 times that of the diffraction limited depth range. PMID:27607986

Floating-to-Fixed-Point Conversion for Digital Signal Processors

NASA Astrophysics Data System (ADS)

Menard, Daniel; Chillet, Daniel; Sentieys, Olivier

2006-12-01

Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

Triphenylamine-Based Push–Pull Molecule for Photovoltaic Applications: From Synthesis to Ultrafast Device Photophysics

PubMed Central

2017-01-01

Small push–pull molecules attract much attention as prospective donor materials for organic solar cells (OSCs). By chemical engineering, it is possible to combine a number of attractive properties such as broad absorption, efficient charge separation, and vacuum and solution processabilities in a single molecule. Here we report the synthesis and early time photophysics of such a molecule, TPA-2T-DCV-Me, based on the triphenylamine (TPA) donor core and dicyanovinyl (DCV) acceptor end group connected by a thiophene bridge. Using time-resolved photoinduced absorption and photoluminescence, we demonstrate that in blends with [70]PCBM the molecule works both as an electron donor and hole acceptor, thereby allowing for two independent channels of charge generation. The charge-generation process is followed by the recombination of interfacial charge transfer states that takes place on the subnanosecond time scale as revealed by time-resolved photoluminescence and nongeminate recombination as follows from the OSC performance. Our findings demonstrate the potential of TPA-DCV-based molecules as donor materials for both solution-processed and vacuum-deposited OSCs. PMID:28413568

A simple and fast representation space for classifying complex time series

NASA Astrophysics Data System (ADS)

Zunino, Luciano; Olivares, Felipe; Bariviera, Aurelio F.; Rosso, Osvaldo A.

2017-03-01

In the context of time series analysis considerable effort has been directed towards the implementation of efficient discriminating statistical quantifiers. Very recently, a simple and fast representation space has been introduced, namely the number of turning points versus the Abbe value. It is able to separate time series from stationary and non-stationary processes with long-range dependences. In this work we show that this bidimensional approach is useful for distinguishing complex time series: different sets of financial and physiological data are efficiently discriminated. Additionally, a multiscale generalization that takes into account the multiple time scales often involved in complex systems has been also proposed. This multiscale analysis is essential to reach a higher discriminative power between physiological time series in health and disease.

Improving GPR Surveys Productivity by Array Technology and Fully Automated Processing

NASA Astrophysics Data System (ADS)

Morello, Marco; Ercoli, Emanuele; Mazzucchelli, Paolo; Cottino, Edoardo

2016-04-01

The realization of network infrastructures with lower environmental impact and the tendency to use digging technologies less invasive in terms of time and space of road occupation and restoration play a key-role in the development of communication networks. However, pre-existing buried utilities must be detected and located in the subsurface, to exploit the high productivity of modern digging apparatus. According to SUE quality level B+ both position and depth of subsurface utilities must be accurately estimated, demanding for 3D GPR surveys. In fact, the advantages of 3D GPR acquisitions (obtained either by multiple 2D recordings or by an antenna array) versus 2D acquisitions are well-known. Nonetheless, the amount of acquired data for such 3D acquisitions does not usually allow to complete processing and interpretation directly in field and in real-time, thus limiting the overall efficiency of the GPR acquisition. As an example, the "low impact mini-trench "technique (addressed in ITU - International Telecommunication Union - L.83 recommendation) requires that non-destructive mapping of buried services enhances its productivity to match the improvements of new digging equipment. Nowadays multi-antenna and multi-pass GPR acquisitions demand for new processing techniques that can obtain high quality subsurface images, taking full advantage of 3D data: the development of a fully automated and real-time 3D GPR processing system plays a key-role in overall optical network deployment profitability. Furthermore, currently available computing power suggests the feasibility of processing schemes that incorporate better focusing algorithms. A novel processing scheme, whose goal is the automated processing and detection of buried targets that can be applied in real-time to 3D GPR array systems, has been developed and fruitfully tested with two different GPR arrays (16 antennas, 900 MHz central frequency, and 34 antennas, 600 MHz central frequency). The proposed processing scheme take advantage of 3D data multiplicity by continuous real time data focusing. Pre-stack reflection angle gathers G(x, θ; v) are computed at nv different velocities (by the mean of Kirchhoff depth-migration kernels, that can naturally cope with any acquisition pattern and handle irregular sampling issues). It must be noted that the analysis of pre-stack reflection angle gathers plays a key-role in automated detection: targets are identified and the best local propagation velocities are recovered through a correlation estimate computed for all the nv reflection angle gathers. Indeed, the data redundancy of 3D GPR acquisitions highly improves the proposed automatic detection reliability. The goal of real-time automated processing has been pursued without the need of specific high performance processing hardware (a simple laptop is required). Moreover, the automatization of the entire surveying process allows to obtain high quality and repeatable results without the need of skilled interpreters. The proposed acquisition procedure has been extensively tested: more than 100 Km of acquired data prove the feasibility of the proposed approach.

Processing short-term and long-term information with a combination of polynomial approximation techniques and time-delay neural networks.

PubMed

Fuchs, Erich; Gruber, Christian; Reitmaier, Tobias; Sick, Bernhard

2009-09-01

Neural networks are often used to process temporal information, i.e., any kind of information related to time series. In many cases, time series contain short-term and long-term trends or behavior. This paper presents a new approach to capture temporal information with various reference periods simultaneously. A least squares approximation of the time series with orthogonal polynomials will be used to describe short-term trends contained in a signal (average, increase, curvature, etc.). Long-term behavior will be modeled with the tapped delay lines of a time-delay neural network (TDNN). This network takes the coefficients of the orthogonal expansion of the approximating polynomial as inputs such considering short-term and long-term information efficiently. The advantages of the method will be demonstrated by means of artificial data and two real-world application examples, the prediction of the user number in a computer network and online tool wear classification in turning.

Perceptual asynchrony between color and motion with a single direction change.

PubMed

Linares, Daniel; López-Moliner, Joan

2006-08-23

When a stimulus repeatedly and rapidly changes color (e.g., between red and green) and motion direction (e.g., upwards and downwards) with the same frequency, it was found that observers were most likely to pair colors and motion directions when the direction changes lead the color changes by approximately 80 ms. This is the color-motion asynchrony illusion. According to the differential processing time model, the illusion is explained because the neural activity leading to the perceptual experience of motion requires more time than that of color. Alternatively, the time marker model attributes the misbinding to a failure in matching different sorts of changes at rapid alternations. Here, running counter to the time marker model, we demonstrate that the illusion can arise with a single direction change. Using this simplified version of the illusion we also show that, although some form of visual masking takes place between colors, the measured asynchrony genuinely reflects processing time differences.

Feasibility study of consolidation by direct compaction and friction stir processing of commercially pure titanium powder

NASA Astrophysics Data System (ADS)

Nichols, Leannah M.

Commercially pure titanium can take up to six months to successfully manufacture a six-inch in diameter ingot in which can be shipped to be melted and shaped into other useful components. The applications to the corrosion-resistant, light weight, strong metal are endless, yet so is the manufacturing processing time. At a cost of around $80 per pound of certain grades of titanium powder, the everyday consumer cannot afford to use titanium in the many ways it is beneficial simply because the number of processing steps it takes to manufacture consumes too much time, energy, and labor. In this research, the steps it takes from the raw powder form to the final part are proposed to be reduced from 4-8 steps to only 2 steps utilizing a new technology that may even improve upon the titanium properties at the same time as it is reducing the number of steps of manufacture. The two-step procedure involves selecting a cylindrical or rectangular die and punch to compress a small amount of commercially pure titanium to a strong-enough compact for transportation to the friction stir welder to be consolidated. Friction stir welding invented in 1991 in the United Kingdom uses a tool, similar to a drill bit, to approach a sample and gradually plunge into the material at a certain rotation rate of between 100 to 2,100 RPM. In the second step, the friction stir welder is used to process the titanium powder held in a tight holder to consolidate into a harder titanium form. The resulting samples are cut to expose the cross section and then grinded, polished, and cleaned to be observed and tested using scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), and a Vickers microhardness tester. The results were that the thicker the sample, the harder the resulting consolidated sample peaking at 2 to 3 times harder than that of the original commercially pure titanium in solid form at a peak value of 435.9 hardness and overall average of 251.13 hardness. The combined results of the SEM and EDS have shown that the mixing of the sample holder material, titanium, and tool material were not of a large amount and therefore proves the feasibility of this study. This study should be continued to lessen the labor, energy, and cost of the production of titanium to therefore allow titanium to be improved upon and be more efficient for many applications across many industries.

Level 2 Perspective Taking Entails Two Processes: Evidence from PRP Experiments

ERIC Educational Resources Information Center

Janczyk, Markus

2013-01-01

In many situations people need to mentally adopt the (spatial) perspective of other persons, an ability that is referred to as "Level 2 perspective taking." Its underlying processes have been ascribed to mental self-rotation that can be dissociated from mental object-rotation. Recent findings suggest that perspective taking/self-rotation…

Real-Time Signal Processing Systems

DTIC Science & Technology

1992-10-29

Programmer’s Model 50 15. Synchronization 67 16. Parameter Passage to Routines VIA Stacks 68 17. Typical VPH Activity Flow Chart 70 18. CPH...computing facilities to take advantage of cost effective solutions. A proliferation of different microprocessors and development systems spread among the... activities are completed, the roles of the VPH memory banks are reversed. This function-swapping is the primary reason, for the efficiency and high

Starting Performance Analysis for Universal Motors by FEM

NASA Astrophysics Data System (ADS)

Kurihara, Kazumi; Sakamoto, Shin-Ichi

This paper presents a novel transient analysis of the universal motors taking into account the time-varying brush-contact resistance and mechanical loss. The transient current, torque and speed during the starting process are computed by solving the electromagnetic, circuit and dynamic motion equations, simultaneously. The computed performances have been validated by tests in a 500-W, 2-pole, 50Hz, 100V universal motor.

Defense Logistics Standard Systems Functional Requirements.

DTIC Science & Technology

1987-03-01

Artificial Intelligence - the development of a machine capability to perform functions normally concerned with human intelligence, such as learning , adapting...Basic Data Base Machine Configurations .... ......... D- 18 xx ~ ?f~~~vX PART I: MODELS - DEFENSE LOGISTICS STANDARD SYSTEMS FUNCTIONAL REQUIREMENTS...On-line, Interactive Access. Integrating user input and machine output in a dynamic, real-time, give-and- take process is considered the optimum mode

49 CFR 40.261 - What is a refusal to take an alcohol test, and what are the consequences?

Code of Federal Regulations, 2013 CFR

2013-10-01

... test (except a pre-employment test) within a reasonable time, as determined by the employer, consistent...)) for a pre-employment test is not deemed to have refused to test; (3) Fail to provide an adequate... the testing site before the testing process commences (see § 40.243(a)) for a pre-employment test is...

49 CFR 40.261 - What is a refusal to take an alcohol test, and what are the consequences?

Code of Federal Regulations, 2011 CFR

2011-10-01

... test (except a pre-employment test) within a reasonable time, as determined by the employer, consistent...)) for a pre-employment test is not deemed to have refused to test; (3) Fail to provide an adequate... the testing site before the testing process commences (see § 40.243(a)) for a pre-employment test is...

Urban v. Suburban: The Examination of the Debate over Where to Site Two New Jersey Community Colleges

ERIC Educational Resources Information Center

Noonan, Patrick S.

2013-01-01

This research examines the debate surrounding the site selection of several New Jersey community colleges. It takes into account the 1960s time period in which they were founded. The process to establish a community college commenced with each county establishing a committee to assess whether or not there was a need to institute a county college…

“Pretty Pictures” with the HDI

NASA Astrophysics Data System (ADS)

Buckner, Spencer L.

2017-01-01

The Half-Degree Imager (HDI) has been in use on the 0.9-m WIYN telescope since October 2013. The instrument has well served the consortium as evidenced by the posters in this session and presentations at the concurrent special session held at this meeting. One thing that has been missing from the mix are aesthetically pleasing images for use in publicity and public outreach. Making “pretty pictures” with a scientific instrument such as HDI presents a number of challenges and opportunities. The chief challenge is finding the time to do the basic imaging given the limited telescope time available to users. Most users are understandably reluctant to take time away from imaging for their scientific research to take images whose primary purpose is to make a pretty picture. Fortunately, imaging of some objects to make pretty pictures can be done under sky conditions that are less than ideal when photometric studies would have limited usefulness. Another challenge is the raw HDI images must be converted from an extended FITS format into a normal FITS and a filter line added to the header to make the images usable by most commercially available image processing software. On the plus side, pretty picture images can serve to inspire prospective students into astronomy. Austin Peay State University has a popular astrophotography class that makes use of images taken with the HDI camera to introduce students to basic image processing techniques. The course is taken by both physics majors on the astrophysics track and non-science majors completing the astronomy minor. Pretty pictures can also be used as a recruitment tool to bring students into astronomy. APSU houses physics, biology, chemistry, agriculture and medical technology in the same building and displaying astronomical pictures at strategic locations around the building serves to recruit non-science majors to take more astronomy courses. Finally, the images can be used in publicity and outreach efforts by the university. This poster presents some of the techniques used in processing the images tor aesthetic value and how those images are used in recruitment, publicity and outreach. Several of the finished images in poster-sized prints will be available for viewing.

Frequency and time resolved measurements at rotating ring-disk electrodes for studying localized corrosion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huet, F.; Keddam, M.; Takenouti, H.

1993-07-01

By conferring frequency and time resolution on the rotating rink-disk electrode technique, original information can be obtained on the mechanism of corrosion processes involving the formation of intermediate, passive, or corrosion product layers. The methodology that allows the measurement of the actual flux of chemical species generated by a localized corrosion site is described which takes into account the usual parameters of the RRDE and the location of the active spot on the disk surface. Application to pitting corrosion of iron by Cl[sup [minus

Optimal Black Start Resource Allocation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiu, Feng; Wang, Jianhui; Chen, Chen

The restoration of the bulk power system after a partial or complete blackout relies on black-start (BS) resources. To prepare for system restoration, it is important to procure the right amount of BS resources at the right locations in the grid so that the total restoration time can be minimized. Achieving this goal requires that resource procurement planning takes the restoration process into account. In this study, we integrate the BS resource procurement decision with a restoration planning model and develop an optimization model that produces a minimal cost procurement plan that satisfies the restoration time requirement.

Large Deviations for Stationary Probabilities of a Family of Continuous Time Markov Chains via Aubry-Mather Theory

NASA Astrophysics Data System (ADS)

Lopes, Artur O.; Neumann, Adriana

2015-05-01

In the present paper, we consider a family of continuous time symmetric random walks indexed by , . For each the matching random walk take values in the finite set of states ; notice that is a subset of , where is the unitary circle. The infinitesimal generator of such chain is denoted by . The stationary probability for such process converges to the uniform distribution on the circle, when . Here we want to study other natural measures, obtained via a limit on , that are concentrated on some points of . We will disturb this process by a potential and study for each the perturbed stationary measures of this new process when . We disturb the system considering a fixed potential and we will denote by the restriction of to . Then, we define a non-stochastic semigroup generated by the matrix , where is the infinifesimal generator of . From the continuous time Perron's Theorem one can normalized such semigroup, and, then we get another stochastic semigroup which generates a continuous time Markov Chain taking values on . This new chain is called the continuous time Gibbs state associated to the potential , see (Lopes et al. in J Stat Phys 152:894-933, 2013). The stationary probability vector for such Markov Chain is denoted by . We assume that the maximum of is attained in a unique point of , and from this will follow that . Thus, here, our main goal is to analyze the large deviation principle for the family , when . The deviation function , which is defined on , will be obtained from a procedure based on fixed points of the Lax-Oleinik operator and Aubry-Mather theory. In order to obtain the associated Lax-Oleinik operator we use the Varadhan's Lemma for the process . For a careful analysis of the problem we present full details of the proof of the Large Deviation Principle, in the Skorohod space, for such family of Markov Chains, when . Finally, we compute the entropy of the invariant probabilities on the Skorohod space associated to the Markov Chains we analyze.

Hiring: take your time but not too much

NASA Astrophysics Data System (ADS)

Usher, Linda

2010-08-01

People are any company's greatest asset. Without a great team no company would be able to conceive of a product or service. It would not be able to design or develop a product or service. It could not possibly market or sell that product or service. How a company goes about hiring its talent is one of the most critical components to developing a great team, to having low attrition, and to having a high level of employee faith in management. Far too often I have seen companies when tasked with filling requisitions not take the time to consider, or layout and execute their priorities in hiring. It's a pretty safe assumption that if one doesn't feel they have enough time to be careful and thorough in their hiring approach in order to get the right person the first time - they probably won't have enough time to replace someone they would not have hired had they done it right in the first place! The flip side of this is the problem of letting too much time pass in the process and therefore losing opportunities to hire great people. This paper will point out many mistakes I have seen made in hiring approaches so that hopefully, different strategies can be adopted to avoid those mistakes in the future.

Cruel to be kind but not cruel for cash: Harm aversion in the dictator game.

PubMed

Perera, Pri; Canic, Emina; Ludvig, Elliot A

2016-06-01

People regularly take prosocial actions, making individual sacrifices for the greater good. Similarly, people generally avoid causing harm to others. These twin desires to do good and avoid harm often align, but sometimes they can diverge, creating situations of moral conflict. Here, we examined this moral conflict using a modified dictator game. Participants chose how much money to allocate away from a recipient who was designated as an orphan, creating a sense of harm. This money was then reallocated to either the participant or a charity. People were strongly prosocial: they allocated more money away from the orphan for charity than for themselves. Furthermore, people left more money with the orphan when the harm was framed as a means (taking) than as a side effect (splitting). As is predicted by dual-process theories of moral decision making, response times were longer with the take action and were positively correlated with the amount taken from the orphan. We concluded that just as people take positive actions for the greater good, they are similarly more willing to cause harm when it benefits others rather than themselves.

The dual process model of coping with bereavement: rationale and description.

PubMed

Stroebe, M; Schut, H

1999-01-01

There are shortcomings in traditional theorizing about effective ways of coping with bereavement, most notably, with respect to the so-called "grief work hypothesis." Criticisms include imprecise definition, failure to represent dynamic processing that is characteristic of grieving, lack of empirical evidence and validation across cultures and historical periods, and a limited focus on intrapersonal processes and on health outcomes. Therefore, a revised model of coping with bereavement, the dual process model, is proposed. This model identifies two types of stressors, loss- and restoration-oriented, and a dynamic, regulatory coping process of oscillation, whereby the grieving individual at times confronts, at other times avoids, the different tasks of grieving. This model proposes that adaptive coping is composed of confrontation--avoidance of loss and restoration stressors. It also argues the need for dosage of grieving, that is, the need to take respite from dealing with either of these stressors, as an integral part of adaptive coping. Empirical research to support this conceptualization is discussed, and the model's relevance to the examination of complicated grief, analysis of subgroup phenomena, as well as interpersonal coping processes, is described.

Assessment of the Orion-SLS Interface Management Process in Achieving the EIA 731.1 Systems Engineering Capability Model Generic Practices Level 3 Criteria

NASA Technical Reports Server (NTRS)

Jellicorse, John J.; Rahman, Shamin A.

2016-01-01

NASA is currently developing the next generation crewed spacecraft and launch vehicle for exploration beyond earth orbit including returning to the Moon and making the transit to Mars. Managing the design integration of major hardware elements of a space transportation system is critical for overcoming both the technical and programmatic challenges in taking a complex system from concept to space operations. An established method of accomplishing this is formal interface management. In this paper we set forth an argument that the interface management process implemented by NASA between the Orion Multi-Purpose Crew Vehicle (MPCV) and the Space Launch System (SLS) achieves the Level 3 tier of the EIA 731.1 System Engineering Capability Model (SECM) for Generic Practices. We describe the relevant NASA systems and associated organizations, and define the EIA SECM Level 3 Generic Practices. We then provide evidence for our compliance with those practices. This evidence includes discussions of: NASA Systems Engineering Interface (SE) Management standard process and best practices; the tailoring of that process for implementation on the Orion to SLS interface; changes made over time to improve the tailored process, and; the opportunities to take the resulting lessons learned and propose improvements to our institutional processes and best practices. We compare this evidence against the practices to form the rationale for the declared SECM maturity level.

Scheduling real-time, periodic jobs using imprecise results

NASA Technical Reports Server (NTRS)

Liu, Jane W. S.; Lin, Kwei-Jay; Natarajan, Swaminathan

1987-01-01

A process is called a monotone process if the accuracy of its intermediate results is non-decreasing as more time is spent to obtain the result. The result produced by a monotone process upon its normal termination is the desired result; the error in this result is zero. External events such as timeouts or crashes may cause the process to terminate prematurely. If the intermediate result produced by the process upon its premature termination is saved and made available, the application may still find the result unusable and, hence, acceptable; such a result is said to be an imprecise one. The error in an imprecise result is nonzero. The problem of scheduling periodic jobs to meet deadlines on a system that provides the necessary programming language primitives and run-time support for processes to return imprecise results is discussed. This problem differs from the traditional scheduling problems since the scheduler may choose to terminate a task before it is completed, causing it to produce an acceptable but imprecise result. Consequently, the amounts of processor time assigned to tasks in a valid schedule can be less than the amounts of time required to complete the tasks. A meaningful formulation of this problem taking into account the quality of the overall result is discussed. Three algorithms for scheduling jobs for which the effects of errors in results produced in different periods are not cumulative are described, and their relative merits are evaluated.

Transition times between the extremum points of the current–voltage characteristic of a resonant tunneling diode with hysteresis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grishakov, K. S., E-mail: ksgrishakov@yahoo.com; Elesin, V. F.

A numerical solution to the problem of transient processes in a resonant tunneling diode featuring a current–voltage characteristic with hysteresis is found for the first time in the context of a coherent model (based on the coupled Schrödinger and Poisson equations) taking into account the Fermi distribution of electrons. The transitions from the high-current to the low-current state and vice versa, which result from the existence of hysteresis and are of great practical importance for ultrafast switches based on resonant tunneling diodes, are studied in detail. It is shown that the transition times for such processes initiated by the applicationmore » of a small voltage can significantly exceed the characteristic time ℏ/Γ (where G is the width of the resonance level). It is established for the first time that the transition time can be reduced and made as short as the characteristic time ℏ/Γ by applying a sufficiently high voltage. For the parameters of the resonant-tunnelingdiode structure considered in this study, the required voltage is about 0.01 V.« less

Energy Efficient Data Transmission for Sensors with Wireless Charging

PubMed Central

Luo, Junzhou; Wu, Weiwei; Gao, Hong

2018-01-01

This paper studies the problem of maximizing the energy utilization for data transmission in sensors with periodical wireless charging process while taking into account the thermal effect. Two classes of problems are analyzed: one is the case that wireless charging can process for only a limited period of time, and the other is the case that wireless charging can process for a long enough time. Algorithms are proposed to solve the problems and analysis of these algorithms are also provided. For the first problem, three subproblems are studied, and, for the general problem, we give an algorithm that can derive a performance bound of (1−12m)(OPT−E) compared to an optimal solution. In addition, for the second problem, we provide an algorithm with 2m2m−1OPT+1 performance bound for the general problem. Simulations confirm the analysis of the algorithms. PMID:29419770

Energy Efficient Data Transmission for Sensors with Wireless Charging.

PubMed

Fang, Xiaolin; Luo, Junzhou; Wu, Weiwei; Gao, Hong

2018-02-08

This paper studies the problem of maximizing the energy utilization for data transmission in sensors with periodical wireless charging process while taking into account the thermal effect. Two classes of problems are analyzed: one is the case that wireless charging can process for only a limited period of time, and the other is the case that wireless charging can process for a long enough time. Algorithms are proposed to solve the problems and analysis of these algorithms are also provided. For the first problem, three subproblems are studied, and, for the general problem, we give an algorithm that can derive a performance bound of ( 1 - 1 2 m ) ( O P T - E ) compared to an optimal solution. In addition, for the second problem, we provide an algorithm with 2 m 2 m - 1 O P T + 1 performance bound for the general problem. Simulations confirm the analysis of the algorithms.

The syntactic complexity of Russian relative clauses

PubMed Central

Fedorenko, Evelina; Gibson, Edward

2012-01-01

Although syntactic complexity has been investigated across dozens of studies, the available data still greatly underdetermine relevant theories of processing difficulty. Memory-based and expectation-based theories make opposite predictions regarding fine-grained time course of processing difficulty in syntactically constrained contexts, and each class of theory receives support from results on some constructions in some languages. Here we report four self-paced reading experiments on the online comprehension of Russian relative clauses together with related corpus studies, taking advantage of Russian’s flexible word order to disentangle predictions of competing theories. We find support for key predictions of memory-based theories in reading times at RC verbs, and for key predictions of expectation-based theories in processing difficulty at RC-initial accusative noun phrase (NP) objects, which corpus data suggest should be highly unexpected. These results suggest that a complete theory of syntactic complexity must integrate insights from both expectation-based and memory-based theories. PMID:24711687

High-pressure processing as emergent technology for the extraction of bioactive ingredients from plant materials.

PubMed

Jun, Xi

2013-01-01

High-pressure processing is a food processing technique that has shown great potentials in the food industry. Recently, it was developed to extract bioactive ingredients from plant materials, known as ultrahigh pressure extraction (UPE), taking advantages of time saving, higher extraction yields, fewer impurities in the extraction solution, minimal heat and can avoid thermal degradation on the activity and structure of bioactive components, and so on. This review provides an overview of the developments in the UPE of bioactive ingredients from plant material. Apart from a brief presentation of the theories of UPE and extraction equipment systems, the principal parameters that influence the extraction efficiency to be optimized in the UPE (e.g., solvent, pressure, temperature, extraction time, and the number of cycle) were discussed in detail, and finally the more recent applications of UPE for the extraction of active compounds from plant materials were summarized.

Review of critical flow rate, propagation of pressure pulse, and sonic velocity in two-phase media

NASA Technical Reports Server (NTRS)

Hsu, Y.

1972-01-01

For single-phase media, the critical discharge velocity, the sonic velocity, and the pressure pulse propagation velocity can be expressed in the same form by assuming isentropic, equilibria processes. In two-phase mixtures, the same concept is not valid due to the existence of interfacial transports of momentum, heat, and mass. Thus, the three velocities should be treated differently and separately for each particular condition, taking into account the various transport processes involved under that condition. Various attempts are reviewed to predict the critical discharge rate or the propagation velocities by considering slip ratio (momentum change), evaporation (mass and heat transport), flow pattern, etc. Experimental data were compared with predictions based on various theorems. The importance is stressed of the time required to achieve equilibrium as compared with the time available during the process, for example, of passing a pressure pulse.

Multi-tasking arbitration and behaviour design for human-interactive robots

NASA Astrophysics Data System (ADS)

Kobayashi, Yuichi; Onishi, Masaki; Hosoe, Shigeyuki; Luo, Zhiwei

2013-05-01

Robots that interact with humans in household environments are required to handle multiple real-time tasks simultaneously, such as carrying objects, collision avoidance and conversation with human. This article presents a design framework for the control and recognition processes to meet these requirements taking into account stochastic human behaviour. The proposed design method first introduces a Petri net for synchronisation of multiple tasks. The Petri net formulation is converted to Markov decision processes and processed in an optimal control framework. Three tasks (safety confirmation, object conveyance and conversation) interact and are expressed by the Petri net. Using the proposed framework, tasks that normally tend to be designed by integrating many if-then rules can be designed in a systematic manner in a state estimation and optimisation framework from the viewpoint of the shortest time optimal control. The proposed arbitration method was verified by simulations and experiments using RI-MAN, which was developed for interactive tasks with humans.

Developing a strategic plan for a neonatal nurse practitioner service.

PubMed

Lee, Laurie A; Jones, Luann R

2004-10-01

Neonatal nurse practitioners (NNPs) have been in practice for over 3 decades. More recently, NNPs have begun to take ownership for building their group practice models. The purpose of this article is to present a detailed case study demonstrating how one NNP group used a 4-phase strategic planning process to turn a crisis into an opportunity. The article describes data obtained during the strategic planning process from an informal national survey of NNP managers that focused on key benchmarks, such as role definition, responsibilities, protected nonclinical time, NNP salary and benefits, and educational and professional development support. Using the strategic planning process, the group defined mutually agreed upon minimum safe staffing levels for NNPs, interns, residents and neonatologists in their setting. Based on the data generated, the group successfully justified additional NNP positions and organizational support for 10% protected nonclinical time. A sample operational budget, comparison of 3 staffing scenarios, and a timeline are also provided.

ID card number detection algorithm based on convolutional neural network

NASA Astrophysics Data System (ADS)

Zhu, Jian; Ma, Hanjie; Feng, Jie; Dai, Leiyan

2018-04-01

In this paper, a new detection algorithm based on Convolutional Neural Network is presented in order to realize the fast and convenient ID information extraction in multiple scenarios. The algorithm uses the mobile device equipped with Android operating system to locate and extract the ID number; Use the special color distribution of the ID card, select the appropriate channel component; Use the image threshold segmentation, noise processing and morphological processing to take the binary processing for image; At the same time, the image rotation and projection method are used for horizontal correction when image was tilting; Finally, the single character is extracted by the projection method, and recognized by using Convolutional Neural Network. Through test shows that, A single ID number image from the extraction to the identification time is about 80ms, the accuracy rate is about 99%, It can be applied to the actual production and living environment.

Stress, Time Pressure, Strategy Selection and Math Anxiety in Mathematics: A Review of the Literature.

PubMed

Caviola, Sara; Carey, Emma; Mammarella, Irene C; Szucs, Denes

2017-01-01

We review how stress induction, time pressure manipulations and math anxiety can interfere with or modulate selection of problem-solving strategies (henceforth "strategy selection") in arithmetical tasks. Nineteen relevant articles were identified, which contain references to strategy selection and time limit (or time manipulations), with some also discussing emotional aspects in mathematical outcomes. Few of these take cognitive processes such as working memory or executive functions into consideration. We conclude that due to the sparsity of available literature our questions can only be partially answered and currently there is not much evidence of clear associations. We identify major gaps in knowledge and raise a series of open questions to guide further research.

Modeling environmental noise exceedances using non-homogeneous Poisson processes.

PubMed

Guarnaccia, Claudio; Quartieri, Joseph; Barrios, Juan M; Rodrigues, Eliane R

2014-10-01

In this work a non-homogeneous Poisson model is considered to study noise exposure. The Poisson process, counting the number of times that a sound level surpasses a threshold, is used to estimate the probability that a population is exposed to high levels of noise a certain number of times in a given time interval. The rate function of the Poisson process is assumed to be of a Weibull type. The presented model is applied to community noise data from Messina, Sicily (Italy). Four sets of data are used to estimate the parameters involved in the model. After the estimation and tuning are made, a way of estimating the probability that an environmental noise threshold is exceeded a certain number of times in a given time interval is presented. This estimation can be very useful in the study of noise exposure of a population and also to predict, given the current behavior of the data, the probability of occurrence of high levels of noise in the near future. One of the most important features of the model is that it implicitly takes into account different noise sources, which need to be treated separately when using usual models.

The Ebb and Flow of Filipino First-Time Fatherhood Transition Space: A Grounded Theory Study.

PubMed

Villamor, Neil Jupiter E; de Guzman, Allan B; Matienzo, Evangeline T

2016-11-01

Fatherhood, as a developmental process, is both a human experience and a text that needs to be read. For developing nations like the Philippines, little is known about the process undergone by first-time fathers on their transition to fatherhood, and how nurses can play a significant role in assisting them. This grounded theory study purported to conceptualize the multifaceted process of transition from the lens of Filipino first-time fathers' lived experiences. A total of 20 first-time fathers from Metro Manila, Philippines, were purposively selected to take part in an individual, semistructured, and in-depth interview. The Glaserian (classical) method of analysis was specifically used, and field texts were inductively analyzed using a repertory grid. Member checking and correspondence were done to validate the findings of the study. Six surfacing stages emerged relative to the process of transition. Interestingly, The B.R.I.D.G.E. Theory of First-Time Fatherhood Transition Space describes how these fathers progress from the beholding, reorganizing, inhibiting, delivering, grasping, and embracing phases toward successful transition. This emerged theoretical model can be used in framing health care programs where the needs of fathers during this period are met and addressed. Finally, it can also be used in guiding nurses in their provision of a more empathetic care for first-time fathers. © The Author(s) 2015.

Autonomous Acquisition of Science Quality Spectra from Unmanned Aerial Systems

NASA Technical Reports Server (NTRS)

Mandl, Daniel; Campbell, Petya; Sohlberg, Robert; Cappelaere, Pat; Ong, Lawrence

2017-01-01

This is a presentation on a technique for using Unmanned Aerial Systems with intelligent sensing to create science quality data. In this particular case, the team used two spectrometers with high spectral resolution and developed a technique to have the spectrometers self calibrate so that it is possible to take the measurements within the allocated 10 minute flight times. Because there is both upwelling and downwelling foreoptics on each of the two spectrometers, it becomes slow to set the calibration up for all four possibilities which relates to the integration time and then take the measurements. If light conditions change too rapidly then the measurements won't be scaled so that the spectra max is at least 85% of the instrument max but not saturated. This process was more difficult then it appeared due to the complexity of determining the integration time before light conditions changed and before the battery runs our of charge to fly the Unmanned Aerial System. This presentation goes over the results for the first few flight days and the planned future flight experiments.

Data acquisition and processing system for the HT-6M tokamak fusion experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shu, Y.T.; Liu, G.C.; Pang, J.Q.

1987-08-01

This paper describes a high-speed data acquisition and processing system which has been successfully operated on the HT-6M tokamak fusion experimental device. The system collects, archives and analyzes up to 512 kilobytes of data from each shot of the experiment. A shot lasts 50-150 milliseconds and occurs every 5-10 minutes. The system consists of two PDP-11/24 computer systems. One PDP-11/24 is used for real-time data taking and on-line data analysis. It is based upon five CAMAC crates organized into a parallel branch. Another PDP-11/24 is used for off-line data processing. Both data acquisition software RSX-DAS and data processing software RSX-DAPmore » have modular, multi-tasking and concurrent processing features.« less

Matrix decomposition graphics processing unit solver for Poisson image editing

NASA Astrophysics Data System (ADS)

Lei, Zhao; Wei, Li

2012-10-01

In recent years, gradient-domain methods have been widely discussed in the image processing field, including seamless cloning and image stitching. These algorithms are commonly carried out by solving a large sparse linear system: the Poisson equation. However, solving the Poisson equation is a computational and memory intensive task which makes it not suitable for real-time image editing. A new matrix decomposition graphics processing unit (GPU) solver (MDGS) is proposed to settle the problem. A matrix decomposition method is used to distribute the work among GPU threads, so that MDGS will take full advantage of the computing power of current GPUs. Additionally, MDGS is a hybrid solver (combines both the direct and iterative techniques) and has two-level architecture. These enable MDGS to generate identical solutions with those of the common Poisson methods and achieve high convergence rate in most cases. This approach is advantageous in terms of parallelizability, enabling real-time image processing, low memory-taken and extensive applications.

A real-time n/γ digital pulse shape discriminator based on FPGA.

PubMed

Li, Shiping; Xu, Xiufeng; Cao, Hongrui; Yuan, Guoliang; Yang, Qingwei; Yin, Zejie

2013-02-01

A FPGA-based real-time digital pulse shape discriminator has been employed to distinguish between neutrons (n) and gammas (γ) in the Neutron Flux Monitor (NFM) for International Thermonuclear Experimental Reactor (ITER). The discriminator takes advantages of the Field Programmable Gate Array (FPGA) parallel and pipeline process capabilities to carry out the real-time sifting of neutrons in n/γ mixed radiation fields, and uses the rise time and amplitude inspection techniques simultaneously as the discrimination algorithm to observe good n/γ separation. Some experimental results have been presented which show that this discriminator can realize the anticipated goals of NFM perfectly with its excellent discrimination quality and zero dead time. Copyright © 2012 Elsevier Ltd. All rights reserved.

Long-lasting quantum memories: Extending the coherence time of superconducting artificial atoms in the ultrastrong-coupling regime

NASA Astrophysics Data System (ADS)

Stassi, Roberto; Nori, Franco

2018-03-01

Quantum systems are affected by interactions with their environments, causing decoherence through two processes: pure dephasing and energy relaxation. For quantum information processing it is important to increase the coherence time of Josephson qubits and other artificial two-level atoms. We show theoretically that if the coupling between these qubits and a cavity field is longitudinal and in the ultrastrong-coupling regime, the system is strongly protected against relaxation. Vice versa, if the coupling is transverse and in the ultrastrong-coupling regime, the system is protected against pure dephasing. Taking advantage of the relaxation suppression, we show that it is possible to enhance their coherence time and use these qubits as quantum memories. Indeed, to preserve the coherence from pure dephasing, we prove that it is possible to apply dynamical decoupling. We also use an auxiliary atomic level to store and retrieve quantum information.

Digital pulse processing and electronic noise analysis for improving energy resolutions in planar TlBr detectors

NASA Astrophysics Data System (ADS)

Tada, Tsutomu; Hitomi, Keitaro; Tanaka, Tomonobu; Wu, Yan; Kim, Seong-Yun; Yamazaki, Hiromichi; Ishii, Keizo

2011-05-01

Digital pulse processing and electronic noise analysis are proposed for improving energy resolution in planar thallium bromide (TlBr) detectors. An energy resolution of 5.8% FWHM at 662 keV was obtained from a 0.5 mm thick planar TlBr detector at room temperature using a digitizer with a sampling rate of 100 MS/s and 8 bit resolution. The electronic noise in the detector-preamplifier system was measured as a function of pulse shaping time in order to investigate the optimum shaping time for the detector. The depth of interaction (DOI) in TlBr detectors for incident gamma-rays was determined by taking the ratio of pulse heights for fast-shaped to slow-shaped signals. FWHM energy resolution of the detector was improved from 5.8% to 4.2% by implementing depth correction and by using the obtained optimum shaping time.

Computer simulations and real-time control of ELT AO systems using graphical processing units

NASA Astrophysics Data System (ADS)

Wang, Lianqi; Ellerbroek, Brent

2012-07-01

The adaptive optics (AO) simulations at the Thirty Meter Telescope (TMT) have been carried out using the efficient, C based multi-threaded adaptive optics simulator (MAOS, http://github.com/lianqiw/maos). By porting time-critical parts of MAOS to graphical processing units (GPU) using NVIDIA CUDA technology, we achieved a 10 fold speed up for each GTX 580 GPU used compared to a modern quad core CPU. Each time step of full scale end to end simulation for the TMT narrow field infrared AO system (NFIRAOS) takes only 0.11 second in a desktop with two GTX 580s. We also demonstrate that the TMT minimum variance reconstructor can be assembled in matrix vector multiply (MVM) format in 8 seconds with 8 GTX 580 GPUs, meeting the TMT requirement for updating the reconstructor. Analysis show that it is also possible to apply the MVM using 8 GTX 580s within the required latency.

Hardware for dynamic quantum computing.

PubMed

Ryan, Colm A; Johnson, Blake R; Ristè, Diego; Donovan, Brian; Ohki, Thomas A

2017-10-01

We describe the hardware, gateware, and software developed at Raytheon BBN Technologies for dynamic quantum information processing experiments on superconducting qubits. In dynamic experiments, real-time qubit state information is fed back or fed forward within a fraction of the qubits' coherence time to dynamically change the implemented sequence. The hardware presented here covers both control and readout of superconducting qubits. For readout, we created a custom signal processing gateware and software stack on commercial hardware to convert pulses in a heterodyne receiver into qubit state assignments with minimal latency, alongside data taking capability. For control, we developed custom hardware with gateware and software for pulse sequencing and steering information distribution that is capable of arbitrary control flow in a fraction of superconducting qubit coherence times. Both readout and control platforms make extensive use of field programmable gate arrays to enable tailored qubit control systems in a reconfigurable fabric suitable for iterative development.

Time Alignment as a Necessary Step in the Analysis of Sleep Probabilistic Curves

NASA Astrophysics Data System (ADS)

Rošt'áková, Zuzana; Rosipal, Roman

2018-02-01

Sleep can be characterised as a dynamic process that has a finite set of sleep stages during the night. The standard Rechtschaffen and Kales sleep model produces discrete representation of sleep and does not take into account its dynamic structure. In contrast, the continuous sleep representation provided by the probabilistic sleep model accounts for the dynamics of the sleep process. However, analysis of the sleep probabilistic curves is problematic when time misalignment is present. In this study, we highlight the necessity of curve synchronisation before further analysis. Original and in time aligned sleep probabilistic curves were transformed into a finite dimensional vector space, and their ability to predict subjects' age or daily measures is evaluated. We conclude that curve alignment significantly improves the prediction of the daily measures, especially in the case of the S2-related sleep states or slow wave sleep.

United Space Alliance LLC Parachute Refurbishment Facility Model

NASA Technical Reports Server (NTRS)

Esser, Valerie; Pessaro, Martha; Young, Angela

2007-01-01

The Parachute Refurbishment Facility Model was created to reflect the flow of hardware through the facility using anticipated start and delivery times from a project level IV schedule. Distributions for task times were built using historical build data for SFOC work and new data generated for CLV/ARES task times. The model currently processes 633 line items from 14 SFOC builds for flight readiness, 16 SFOC builds returning from flight for defoul, wash, and dry operations, 12 builds for CLV manufacturing operations, and 1 ARES 1X build. Modeling the planned workflow through the PRF is providing a reliable way to predict the capability of the facility as well as the manpower resource need. Creating a real world process allows for real world problems to be identified and potential workarounds to be implemented in a safe, simulated world before taking it to the next step, implementation in the real world.

Biosynthesis of CdS nanoparticles: A fluorescent sensor for sulfate-reducing bacteria detection.

PubMed

Qi, Peng; Zhang, Dun; Zeng, Yan; Wan, Yi

2016-01-15

CdS nanoparticles were synthesized with an environmentally friendly method by taking advantage of the characteristic metabolic process of sulfate-reducing bacteria (SRB), and used as fluorescence labels for SRB detection. The presence of CdS nanoparticles was observed within and immediately surrounded bacterial cells, indicating CdS nanoparticles were synthesized both intracellularly and extracellularly. Moreover, fluorescent properties of microbial synthesized CdS nanoparticles were evaluated for SRB detection, and a linear relationship between fluorescence intensity and the logarithm of bacterial concentration was obtained in the range of from 1.0×10(2) to 1.0×10(7)cfu mL(-1). The proposed SRB detection method avoided the use of biological bio-recognition elements which are easy to lose their specific recognizing abilities, and the bacterial detection time was greatly shortened compared with the widely used MPN method which would take up to 15 days to accomplish the detection process. Copyright © 2015 Elsevier B.V. All rights reserved.

Temporal relation between top-down and bottom-up processing in lexical tone perception

PubMed Central

Shuai, Lan; Gong, Tao

2013-01-01

Speech perception entails both top-down processing that relies primarily on language experience and bottom-up processing that depends mainly on instant auditory input. Previous models of speech perception often claim that bottom-up processing occurs in an early time window, whereas top-down processing takes place in a late time window after stimulus onset. In this paper, we evaluated the temporal relation of both types of processing in lexical tone perception. We conducted a series of event-related potential (ERP) experiments that recruited Mandarin participants and adopted three experimental paradigms, namely dichotic listening, lexical decision with phonological priming, and semantic violation. By systematically analyzing the lateralization patterns of the early and late ERP components that are observed in these experiments, we discovered that: auditory processing of pitch variations in tones, as a bottom-up effect, elicited greater right hemisphere activation; in contrast, linguistic processing of lexical tones, as a top-down effect, elicited greater left hemisphere activation. We also found that both types of processing co-occurred in both the early (around 200 ms) and late (around 300–500 ms) time windows, which supported a parallel model of lexical tone perception. Unlike the previous view that language processing is special and performed by dedicated neural circuitry, our study have elucidated that language processing can be decomposed into general cognitive functions (e.g., sensory and memory) and share neural resources with these functions. PMID:24723863

A flexible software architecture for scalable real-time image and video processing applications

NASA Astrophysics Data System (ADS)

Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

2012-06-01

Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility because they are normally oriented towards particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse and inefficient execution on multicore processors. This paper presents a novel software architecture for real-time image and video processing applications which addresses these issues. The architecture is divided into three layers: the platform abstraction layer, the messaging layer, and the application layer. The platform abstraction layer provides a high level application programming interface for the rest of the architecture. The messaging layer provides a message passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of messages. The application layer provides a repository for reusable application modules designed for real-time image and video processing applications. These modules, which include acquisition, visualization, communication, user interface and data processing modules, take advantage of the power of other well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, we present different prototypes and applications to show the possibilities of the proposed architecture.

Rapid prototyping of SoC-based real-time vision system: application to image preprocessing and face detection

NASA Astrophysics Data System (ADS)

Jridi, Maher; Alfalou, Ayman

2017-05-01

By this paper, the major goal is to investigate the Multi-CPU/FPGA SoC (System on Chip) design flow and to transfer a know-how and skills to rapidly design embedded real-time vision system. Our aim is to show how the use of these devices can be benefit for system level integration since they make possible simultaneous hardware and software development. We take the facial detection and pretreatments as case study since they have a great potential to be used in several applications such as video surveillance, building access control and criminal identification. The designed system use the Xilinx Zedboard platform. The last is the central element of the developed vision system. The video acquisition is performed using either standard webcam connected to the Zedboard via USB interface or several camera IP devices. The visualization of video content and intermediate results are possible with HDMI interface connected to HD display. The treatments embedded in the system are as follow: (i) pre-processing such as edge detection implemented in the ARM and in the reconfigurable logic, (ii) software implementation of motion detection and face detection using either ViolaJones or LBP (Local Binary Pattern), and (iii) application layer to select processing application and to display results in a web page. One uniquely interesting feature of the proposed system is that two functions have been developed to transmit data from and to the VDMA port. With the proposed optimization, the hardware implementation of the Sobel filter takes 27 ms and 76 ms for 640x480, and 720p resolutions, respectively. Hence, with the FPGA implementation, an acceleration of 5 times is obtained which allow the processing of 37 fps and 13 fps for 640x480, and 720p resolutions, respectively.

Translating the Science of Measuring Ecosystems at a National Scale: Developing NEON's Online Learning Portal

NASA Astrophysics Data System (ADS)

Wasser, L. A.; Gram, W.; Goehring, L.

2014-12-01

"Big Data" are becoming increasingly common in many fields. The National Ecological Observatory Network (NEON) will be collecting data over the 30 years, using consistent, standardized methods across the United States. These freely available new data provide an opportunity for increased understanding of continental- and global scale processes such as changes in vegetation structure and condition, biodiversity and landuse. However, while "big data" are becoming more accessible and available, integrating big data into the university courses is challenging. New and potentially unfamiliar data types and associated processing methods, required to work with a growing diversity of available data, may warrant time and resources that present a barrier to classroom integration. Analysis of these big datasets may further present a challenge given large file sizes, and uncertainty regarding best methods to properly statistically summarize and analyze results. Finally, teaching resources, in the form of demonstrative illustrations, and other supporting media that might help teach key data concepts, take time to find and more time to develop. Available resources are often spread widely across multi-online spaces. This presentation will overview the development of NEON's collaborative University-focused online education portal. Portal content will include 1) videos and supporting graphics that explain key concepts related to NEON data products including collection methods, key metadata to consider and consideration of potential error and uncertainty surrounding data analysis; and 2) packaged "lab" activities that include supporting data to be used in an ecology, biology or earth science classroom. To facilitate broad use in classrooms, lab activities will take advantage of freely and commonly available processing tools, techniques and scripts. All NEON materials are being developed in collaboration with existing labs and organizations.

PS3 CELL Development for Scientific Computation and Research

NASA Astrophysics Data System (ADS)

Christiansen, M.; Sevre, E.; Wang, S. M.; Yuen, D. A.; Liu, S.; Lyness, M. D.; Broten, M.

2007-12-01

The Cell processor is one of the most powerful processors on the market, and researchers in the earth sciences may find its parallel architecture to be very useful. A cell processor, with 7 cores, can easily be obtained for experimentation by purchasing a PlayStation 3 (PS3) and installing linux and the IBM SDK. Each core of the PS3 is capable of 25 GFLOPS giving a potential limit of 150 GFLOPS when using all 6 SPUs (synergistic processing units) by using vectorized algorithms. We have used the Cell's computational power to create a program which takes simulated tsunami datasets, parses them, and returns a colorized height field image using ray casting techniques. As expected, the time required to create an image is inversely proportional to the number of SPUs used. We believe that this trend will continue when multiple PS3s are chained using OpenMP functionality and are in the process of researching this. By using the Cell to visualize tsunami data, we have found that its greatest feature is its power. This fact entwines well with the needs of the scientific community where the limiting factor is time. Any algorithm, such as the heat equation, that can be subdivided into multiple parts can take advantage of the PS3 Cell's ability to split the computations across the 6 SPUs reducing required run time by one sixth. Further vectorization of the code can allow for 4 simultanious floating point operations by using the SIMD (single instruction multiple data) capabilities of the SPU increasing efficiency 24 times.

Support for Online Calibration in the ALICE HLT Framework

NASA Astrophysics Data System (ADS)

Krzewicki, Mikolaj; Rohr, David; Zampolli, Chiara; Wiechula, Jens; Gorbunov, Sergey; Chauvin, Alex; Vorobyev, Ivan; Weber, Steffen; Schweda, Kai; Shahoyan, Ruben; Lindenstruth, Volker; ALICE Collaboration

2017-10-01

The ALICE detector employs sub detectors sensitive to environmental conditions such as pressure and temperature, e.g. the time projection chamber (TPC). A precise reconstruction of particle trajectories requires precise calibration of these detectors. Performing the calibration in real time in the HLT improves the online reconstruction and potentially renders certain offline calibration steps obsolete, speeding up offline physics analysis. For LHC Run 3, starting in 2020 when data reduction will rely on reconstructed data, online calibration becomes a necessity. In order to run the calibration online, the HLT now supports the processing of tasks that typically run offline. These tasks run massively in parallel on all HLT compute nodes and their output is gathered and merged periodically. The calibration results are both stored offline for later use and fed back into the HLT chain via a feedback loop in order to apply calibration information to the online track reconstruction. Online calibration and feedback loop are subject to certain time constraints in order to provide up-to-date calibration information and they must not interfere with ALICE data taking. Our approach to run these tasks in asynchronous processes enables us to separate them from normal data taking in a way that makes it failure resilient. We performed a first test of online TPC drift time calibration under real conditions during the heavy-ion run in December 2015. We present an analysis and conclusions of this first test, new improvements and developments based on this, as well as our current scheme to commission this for production use.

Fractionating the unitary notion of dissociation: disembodied but not embodied dissociative experiences are associated with exocentric perspective-taking

PubMed Central

Braithwaite, Jason J.; James, Kelly; Dewe, Hayley; Medford, Nick; Takahashi, Chie; Kessler, Klaus

2013-01-01

It has been argued that hallucinations which appear to involve shifts in egocentric perspective (e.g., the out-of-body experience, OBE) reflect specific biases in exocentric perspective-taking processes. Via a newly devised perspective-taking task, we examined whether such biases in perspective-taking were present in relation to specific dissociative anomalous body experiences (ABE) – namely the OBE. Participants also completed the Cambridge Depersonalization Scale (CDS; Sierra and Berrios, 2000) which provided measures of additional embodied ABE (unreality of self) and measures of derealization (unreality of surroundings). There were no reliable differences in the level of ABE, emotional numbing, and anomalies in sensory recall reported between the OBE and control group as measured by the corresponding CDS subscales. In contrast, the OBE group did provide significantly elevated measures of derealization (“alienation from surroundings” CDS subscale) relative to the control group. At the same time we also found that the OBE group was significantly more efficient at completing all aspects of the perspective-taking task relative to controls. Collectively, the current findings support fractionating the typically unitary notion of dissociation by proposing a distinction between embodied dissociative experiences and disembodied dissociative experiences – with only the latter being associated with exocentric perspective-taking mechanisms. Our findings – obtained with an ecologically valid task and a homogeneous OBE group – also call for a re-evaluation of the relationship between OBEs and perspective-taking in terms of facilitated disembodied experiences. PMID:24198776

How long did it take for life to begin and evolve to cyanobacteria?

NASA Technical Reports Server (NTRS)

Lazcano, A.; Miller, S. L.

1994-01-01

There is convincing paleontological evidence showing that stromatolite-building phototactic prokaryotes were already in existence 3.5 x 10(9) years ago. Late accretion impacts may have killed off life on our planet as late as 3.8 x 10(9) years ago. This leaves only 300 million years to go from the prebiotic soup to the RNA world and to cyanobacteria. However, 300 million years should be more than sufficient time. All known prebiotic reactions take place in geologically rapid time scales, and very slow prebiotic reactions are not feasible because the intermediate compounds would have been destroyed due to the passage of the entire ocean through deep-sea vents every 10(7) years or in even less time. Therefore, it is likely that self-replicating systems capable of undergoing Darwinian evolution emerged in a period shorter than the destruction rates of its components (<5 million years). The time for evolution from the first DNA/protein organisms to cyanobacteria is usually thought to be very long. However, the similarities of many enzymatic reactions, together with the analysis of the available sequence data, suggest that a significant number of the components involved in basic biological processes are the result of ancient gene duplication events. Assuming that the rate of gene duplication of ancient prokaryotes was comparable to today's present values, the development of a filamentous cyanobacterial-like genome would require approximately 7 x 10(6) years--or perhaps much less. Thus, in spite of the many uncertainties involved in the estimates of time for life to arise and evolve to cyanobacteria, we see no compelling reason to assume that this process, from the beginning of the primitive soup to cyanobacteria, took more than 10 million years.

Long-Term Water Quality Studies in a Eutrophic Lake Catchment: Slapton Ley, SW England

NASA Astrophysics Data System (ADS)

Burt, T. P.; Worrall, F.; Howden, N. J. K.

2014-12-01

Monitoring is the process by which we keep the behaviour of the environment in view, an essential way of discovering whether there are significant undesirable changes taking place. Long-term datasets reveal important patterns for scientists to explain and are essential for testing hypotheses undreamt of at the time monitoring scheme was set up. Many environmental processes take place over relatively long periods of time; very often, subtle processes are embedded within highly variable systems so that their weak signal cannot be extracted without a long record. Slapton Ley is a freshwater coastal lagoon in SW England. The Ley is part of a National Nature Reserve, wetland 116 ha in area which is divided into two basins: the Higher Ley (39 ha) is mainly reed swamp; the Lower Ley (77 ha) is open water. In the 1960s it became apparent that the Ley was becoming increasingly eutrophic. In order to gauge water, sediment and nutrient inputs into the lake, measurements began on the main catchments in late 1969. Continuous monitoring of discharge and a weekly water-sampling programme have been maintained by the Slapton Ley Field Centre ever since. The monitoring programme has been supplemented by a number of research projects which have sought to identify the salient hydrological processes operating within the Slapton catchments and to relate these to the delivery of sediment and solute to the stream system. The nitrate issue has been of particular interest at Slapton; although many longer series exist for large rivers like the Thames, the long record of nitrate data for the Slapton catchments is unique in Britain for small rural basins. Other issues to be explored will be the phosphorus legacy in lake sediments and a long-term decline in lake pH. The Slapton water quality record has confirmed that undesirable changes are taking place, revealed evidence of important patterns to be explained, allowed testing of new hypotheses (e.g. links with land-use change) and helped provide strategies for more successful management of the catchment area.

"I Wanna Go in the Phone": Literacy Acquisition, Informal Learning Processes, "Voice" and Mobile Phone Appropriation in a South African Township

ERIC Educational Resources Information Center

Velghe, Fie

2014-01-01

The uptake of mobile phones has been especially remarkable in the developing world. For the first time in history, people at the bottom of the income pyramid can also take part in the telecommunication society. Mobile phones can play a unique role in reaching those who are outside the scope of formal or institutionalised schooling and open doors…

Shared Savings Contracting for Reducing Energy Costs of Defense Facilities.

DTIC Science & Technology

1983-01-01

also needs additional -4 operation and maintenance help, especially if new equipment is involved. New equipment with sophisticated control technology...process may take time to develop and may be " difficult to integrate with existing financial control practices. For example, the regulations and...will seek a change order on the contract. The potential for such changes, if not controlled , seriously undermines the value of these contracts. DoD

How to Select Books for Teaching to Children: Taking a Critical Look at Books through a Pedagogical Lens

ERIC Educational Resources Information Center

Weih, Timothy G.

2015-01-01

The purpose of this paper is to guide the process of selecting meaningful books to use in pre-K-6 classrooms. With thousands of children's books being published each year, it is difficult for teachers to select which ones hold the most potential to inspire students towards a life time of reading pleasure and purpose. This paper outlines…

Musical Emotions: Functions, Origins, Evolution

DTIC Science & Technology

2010-01-01

might be contentious) neural mechanisms added to our perception of originally mechanical properties of ear. I’ll add that Helmholtz did not touch the main...significant part of conceptual perception is an unconscious process ; for example, visual perception takes about 150 ms, which is a long time when measured...missing in terms of neural mechanisms? How do children learn which words and sentences correspond to which objects and situations? Many psychologists

Possible directions of refining criteria of radiation safety of spaceflights

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovalev, Y.Y.; Petrov, V.M.; Sakovich, V.A.

The possibility of characterizing space flight radiation safety is considered using a value which is integrated over the flight time, takes into account the radiation processes in an irradiated body and averages the probability of adverse radiobiological effects with respect to the distribution of solar proton flares of varying intensity. The proposed characteristic is compared with the current standards with reference to a hypothetic interplanetary flight.

Man-Machine Interaction: Operator.

DTIC Science & Technology

1984-06-01

EASTER OF SCIENCI I COMPUTER SCIENCE Justification from the Distribution/ Availability Codes NAVal POSTGBADUATE SCHOOL Avail and/or June 1984 Dlst...Few pecple, if any, remember everything they see or hear but an anazingly large amount of material can be recalled years after it has been acquired...and skill, learning takes tine. The time required for the learning process will generally vary with the coaplexity of the material cr task he is

Developing an Interactive Augmented Reality System as a Complement to Plant Education and Comparing Its Effectiveness with Video Learning

ERIC Educational Resources Information Center

Chang, Rong-Chi; Chung, Liang-Yi; Huang, Yong-Ming

2016-01-01

The learning of plants has garnered considerable attention in recent years, but students often lack the motivation to learn about the process of plant growth. Also, students are not able to apply what they have learned in class in the form of observation, since plant growth takes a long time. In this study, we use augmented reality (AR) technology…

Exploring First-Time Community College Transfer Students' Perception of Their Experience as They Transition to a Large Public Four-Year Institution

ERIC Educational Resources Information Center

Sklyar, Eduard

2017-01-01

Transfer students are a growing cohort in higher education, with most of them aspiring to earn a bachelor's degree. However, only about 25% of all these students successfully transfer from a community college and receive a baccalaureate degree. The high attrition that takes place between the points of community college, the transfer process and…

Interim reliability evaluation program, Browns Ferry fault trees

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, M.E.

1981-01-01

An abbreviated fault tree method is used to evaluate and model Browns Ferry systems in the Interim Reliability Evaluation programs, simplifying the recording and displaying of events, yet maintaining the system of identifying faults. The level of investigation is not changed. The analytical thought process inherent in the conventional method is not compromised. But the abbreviated method takes less time, and the fault modes are much more visible.

Holographic optical assembly and photopolymerized joining of planar microspheres

DOE PAGES

Shaw, L. A.; Chizari, S.; Panas, R. M.; ...

2016-07-27

The aim of this research is to demonstrate a holographically driven photopolymerization process for joining colloidal particles to create planar microstructures fixed to a substrate, which can be monitored with real-time measurement. Holographic optical tweezers (HOT) have been used to arrange arrays of microparticles prior to this work; here we introduce a new photopolymerization process for rapidly joining simultaneously handled microspheres in a plane. Additionally, we demonstrate a new process control technique for efficiently identifying when particles have been successfully joined by measuring a sufficient reduction in the particles’ Brownian motion. Furthermore, this technique and our demonstrated joining approach enablemore » HOT technology to take critical steps toward automated additive fabrication of microstructures.« less

A Refrigerated Web Camera for Photogrammetric Video Measurement inside Biomass Boilers and Combustion Analysis

PubMed Central

Porteiro, Jacobo; Riveiro, Belén; Granada, Enrique; Armesto, Julia; Eguía, Pablo; Collazo, Joaquín

2011-01-01

This paper describes a prototype instrumentation system for photogrammetric measuring of bed and ash layers, as well as for flying particle detection and pursuit using a single device (CCD) web camera. The system was designed to obtain images of the combustion process in the interior of a domestic boiler. It includes a cooling system, needed because of the high temperatures in the combustion chamber of the boiler. The cooling system was designed using CFD simulations to ensure effectiveness. This method allows more complete and real-time monitoring of the combustion process taking place inside a boiler. The information gained from this system may facilitate the optimisation of boiler processes. PMID:22319349

A refrigerated web camera for photogrammetric video measurement inside biomass boilers and combustion analysis.

PubMed

Porteiro, Jacobo; Riveiro, Belén; Granada, Enrique; Armesto, Julia; Eguía, Pablo; Collazo, Joaquín

2011-01-01

This paper describes a prototype instrumentation system for photogrammetric measuring of bed and ash layers, as well as for flying particle detection and pursuit using a single device (CCD) web camera. The system was designed to obtain images of the combustion process in the interior of a domestic boiler. It includes a cooling system, needed because of the high temperatures in the combustion chamber of the boiler. The cooling system was designed using CFD simulations to ensure effectiveness. This method allows more complete and real-time monitoring of the combustion process taking place inside a boiler. The information gained from this system may facilitate the optimisation of boiler processes.

KSC-08pd0431

NASA Image and Video Library

2008-02-20

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis is towed into the Orbiter Processing Facility, or OPF, where processing Atlantis for another flight will take place. After a round trip of nearly 5.3 million miles, Atlantis and crew returned to Earth with a landing at 9:07 a.m. EST to complete the STS-122 mission. Towing normally begins within four hours after landing and is completed within six hours unless removal of time-sensitive experiments is required on the runway. In the OPF, turnaround processing procedures on Atlantis will include various post-flight deservicing and maintenance functions, which are carried out in parallel with payload removal and the installation of equipment needed for the next mission. Photo credit: NASA/Jack Pfaller

KSC-08pd0430

NASA Image and Video Library

2008-02-20

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis is towed toward the Orbiter Processing Facility, or OPF, where processing Atlantis for another flight will take place. After a round trip of nearly 5.3 million miles, Atlantis and crew returned to Earth with a landing at 9:07 a.m. EST to complete the STS-122 mission. Towing normally begins within four hours after landing and is completed within six hours unless removal of time-sensitive experiments is required on the runway. In the OPF, turnaround processing procedures on Atlantis will include various post-flight deservicing and maintenance functions, which are carried out in parallel with payload removal and the installation of equipment needed for the next mission. Photo credit: NASA/Jack Pfaller

Outpatient Waiting Time in Health Services and Teaching Hospitals: A Case Study in Iran

PubMed Central

Mohebbifar, Rafat; Hasanpoor, Edris; Mohseni, Mohammad; Sokhanvar, Mobin; Khosravizadeh, Omid; Isfahani, Haleh Mousavi

2014-01-01

Background: One of the most important indexes of the health care quality is patient’s satisfaction and it takes place only when there is a process based on management. One of these processes in the health care organizations is the appropriate management of the waiting time process. The aim of this study is the systematic analyzing of the outpatient waiting time. Methods: This descriptive cross sectional study conducted in 2011 is an applicable study performed in the educational and health care hospitals of one of the medical universities located in the north west of Iran. Since the distributions of outpatients in all the months were equal, sampling stage was used. 160 outpatients were studied and the data was analyzed by using SPSS software. Results: Results of the study showed that the waiting time for the outpatients of ophthalmology clinic with an average of 245 minutes for each patient allocated the maximum time among the other clinics for itself. Orthopedic clinic had the minimal waiting time including an average of 77 minutes per patient. The total average waiting time for each patient in the educational hospitals under this study was about 161 minutes. Conclusion: by applying some models, we can reduce the waiting time especially in the realm of time and space before the admission to the examination room. Utilizing the models including the one before admission, electronic visit systems via internet, a process model, six sigma model, queuing theory model and FIFO model, are the components of the intervention that reduces the outpatient waiting time. PMID:24373277

Real-Time Detection and Reading of LED/LCD Displays for Visually Impaired Persons

PubMed Central

Tekin, Ender; Coughlan, James M.; Shen, Huiying

2011-01-01

Modern household appliances, such as microwave ovens and DVD players, increasingly require users to read an LED or LCD display to operate them, posing a severe obstacle for persons with blindness or visual impairment. While OCR-enabled devices are emerging to address the related problem of reading text in printed documents, they are not designed to tackle the challenge of finding and reading characters in appliance displays. Any system for reading these characters must address the challenge of first locating the characters among substantial amounts of background clutter; moreover, poor contrast and the abundance of specular highlights on the display surface – which degrade the image in an unpredictable way as the camera is moved – motivate the need for a system that processes images at a few frames per second, rather than forcing the user to take several photos, each of which can take seconds to acquire and process, until one is readable. We describe a novel system that acquires video, detects and reads LED/LCD characters in real time, reading them aloud to the user with synthesized speech. The system has been implemented on both a desktop and a cell phone. Experimental results are reported on videos of display images, demonstrating the feasibility of the system. PMID:21804957

The Biggest Loser Thinks Long-Term: Recency as a Predictor of Success in Weight Management.

PubMed

Koritzky, Gilly; Rice, Chantelle; Dieterle, Camille; Bechara, Antoine

2015-01-01

Only a minority of participants in behavioral weight management lose weight significantly. The ability to predict who is likely to benefit from weight management can improve the efficiency of obesity treatment. Identifying predictors of weight loss can also reveal potential ways to improve existing treatments. We propose a neuro-psychological model that is focused on recency: the reliance on recent information at the expense of time-distant information. Forty-four weight-management patients completed a decision-making task and their recency level was estimated by a mathematical model. Impulsivity and risk-taking were also measured for comparison. Weight loss was measured in the end of the 16-week intervention. Consistent with our hypothesis, successful dieters (n = 12) had lower recency scores than unsuccessful ones (n = 32; p = 0.006). Successful and unsuccessful dieters were similar in their demographics, intelligence, risk taking, impulsivity, and delay of gratification. We conclude that dieters who process time-distant information in their decision making are more likely to lose weight than those who are high in recency. We argue that having low recency facilitates future-oriented thinking, and thereby contributes to behavior change treatment adherence. Our findings underline the importance of choosing the right treatment for every individual, and outline a way to improve weight-management processes for more patients.

Revising Lecture Notes: How Revision, Pauses, and Partners Affect Note Taking and Achievement

ERIC Educational Resources Information Center

Luo, Linlin; Kiewra, Kenneth A.; Samuelson, Lydia

2016-01-01

Note taking has been categorized as a two-stage process: the recording of notes and the review of notes. We contend that note taking might best involve a three-stage process where the missing stage is revision. This study investigated the benefits of revising lecture notes and addressed two questions: First, is revision more effective than…

Increasing Efficiency at the NTF by Optimizing Model AoA Positioning

NASA Technical Reports Server (NTRS)

Crawford, Bradley L.; Spells, Courtney

2006-01-01

The National Transonic Facility (NTF) at NASA Langley Research Center (LaRC) is a national resource for aeronautical research and development. The government, military and private industries rely on the capability of this facility for realistic flight data. Reducing the operation costs and keeping the NTF affordable is essential for aeronautics research. The NTF is undertaking an effort to reduce the time between data points during a pitch polar. This reduction is being driven by the operating costs of a cryogenic facility. If the time per data point can be reduced, a substantial cost savings can be realized from a reduction in liquid nitrogen (LN2) consumption. It is known that angle-of-attack (AoA) positioning is the longest lead-time item between points. In January 2005 a test was conducted at the NTF to determine the cause of the long lead-time so that an effort could be made to improve efficiency. The AoA signal at the NTF originates from onboard instrumentation then travels through a number of different systems including the signal conditioner, digital voltmeter, and the data system where the AoA angle is calculated. It is then fed into a closed loop control system that sets the model position. Each process along this path adds to the time per data point affecting the efficiency of the data taking process. Due to the nature of the closed loop feed back AoA control and the signal path, it takes approximately 18 seconds to take one pitch pause point with a typical AoA increment. Options are being investigated to reduce the time delay between points by modifying the signal path. These options include: reduced signal filtering, using analog channels instead of a digital volt meter (DVM), re-routing the signal directly to the AoA control computer and implementing new control algorithms. Each of these has potential to reduce the positioning time and together the savings could be significant. These timesaving efforts are essential but must be weighed against possible loss of data quality. For example, a reduction in filtering can introduce noise into the signal and using analog channels could result in some loss of accuracy. Data quality assessments need to be performed concurrently with timesaving techniques since data quality parameters are essential in maintaining facility integrity. This paper will highlight time saving efforts being undertaken or studied at the NTF. It will outline the instrumentation and computer systems involved in setting of the model pitch attitude then suggest changes to the process and discuss how these system changes would effect the time between data points. It also discusses the issue of data quality and how the potential efficiency changes in the system could affect it. Lastly, it will discuss the possibility of using an open loop control system and give some pros and cons of this method.

Deep nursing: a thoughtful, co-created nursing process.

PubMed

Griffiths, Colin

2017-03-30

This article examines some of the challenges in nursing practice experienced by patients and nurses in the UK and Ireland, and considers some of the associated stressors in the system. Nurses must respond to these challenges by crafting their own practice, and the article offers a blueprint for developing personal nursing practice through acceptance, paying detailed attention to patients, taking time with patients and personal reflection. It draws on innovations in learning disability practice to suggest that care should be jointly thought through and co-created by patients and nurses, and that this process of thoughtful engagement constitutes 'deep nursing'.

Successful integration of ergonomics into continuous improvement initiatives.

PubMed

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

The grief process for patient, family, and physician.

PubMed

Bruce, Christine A

2002-09-01

In the grieving process, patient, family, and health professionals have the same needs-rest, relaxation, nourishment, a sense of security, trust, hope in the future, and humor among them. Grief, defined as a shared, universal, and natural neuropsychobiologic expression in response to loss, is distinct from mourning, a practice that varies in expression across diverse cultures. To aid in an understanding of grief and its effects, the author looks at the models for grief proposed by Kubler-Ross, Bowlby, Parkes, Worden, and Wolfelt. Addressing patients' concerns requires physicians be empathic, attentive, and respective and have willingness to take time, be present, and listen.

Convexity of Ruin Probability and Optimal Dividend Strategies for a General Lévy Process

PubMed Central

Yuen, Kam Chuen; Shen, Ying

2015-01-01

We consider the optimal dividends problem for a company whose cash reserves follow a general Lévy process with certain positive jumps and arbitrary negative jumps. The objective is to find a policy which maximizes the expected discounted dividends until the time of ruin. Under appropriate conditions, we use some recent results in the theory of potential analysis of subordinators to obtain the convexity properties of probability of ruin. We present conditions under which the optimal dividend strategy, among all admissible ones, takes the form of a barrier strategy. PMID:26351655

Improved Heat Treatment Of Steel Alloy 4340

NASA Technical Reports Server (NTRS)

Cooper, Lawrence B.

1993-01-01

New process takes significantly less time than prior heat-treatment processes. Involves placing steel plate directly in furnace and heat-treating. Plate then quenched in slowly moving oil to reduce stresses. Any deflection then pressed out. Possible uses of 4340 steel include new and improved bulletproof vests for military and police personnel and armor for bulletproof automobiles for military, police, diplomatic, and private users. Also used in other military land vehicles as tanks and in both military and civilian aircraft. Lighter armorplate enables land vehicles and aircraft to attain greater speed and maneuverability, consume less fuel, and afford better protection from snipers or terrorists.

Changes in visual perspective influence brain activity patterns during cognitive perspective-taking of other people's pain.

PubMed

Vistoli, Damien; Achim, Amélie M; Lavoie, Marie-Audrey; Jackson, Philip L

2016-05-01

Empathy refers to our capacity to share and understand the emotional states of others. It relies on two main processes according to existing models: an effortless affective sharing process based on neural resonance and a more effortful cognitive perspective-taking process enabling the ability to imagine and understand how others feel in specific situations. Until now, studies have focused on factors influencing the affective sharing process but little is known about those influencing the cognitive perspective-taking process and the related brain activations during vicarious pain. In the present fMRI study, we used the well-known physical pain observation task to examine whether the visual perspective can influence, in a bottom-up way, the brain regions involved in taking others' cognitive perspective to attribute their level of pain. We used a pseudo-dynamic version of this classic task which features hands in painful or neutral daily life situations while orthogonally manipulating: (1) the visual perspective with which hands were presented (first-person versus third-person conditions) and (2) the explicit instructions to imagine oneself or an unknown person in those situations (Self versus Other conditions). The cognitive perspective-taking process was investigated by comparing Other and Self conditions. When examined across both visual perspectives, this comparison showed no supra-threshold activation. Instead, the Other versus Self comparison led to a specific recruitment of the bilateral temporo-parietal junction when hands were presented according to a first-person (but not third-person) visual perspective. The present findings identify the visual perspective as a factor that modulates the neural activations related to cognitive perspective-taking during vicarious pain and show that this complex cognitive process can be influenced by perceptual stages of information processing. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hard X-ray time profiles and acceleration processes in large solar flares

NASA Technical Reports Server (NTRS)

Bai, T.; Ramaty, R.

1979-01-01

The hard X-ray time profiles of the (1972) August 4 and 7 flares are investigated, taking into account a comparison of the time profiles of different energy channels. It is shown that for these flares the temporal features of the intensity profiles of higher energy channels are delayed with respect to those of channel 1. The delay time gradually increases to approximately 5 sec as the channel number increases from 1 to 5, and it jumps to approximately 15 sec for channels 6 and 7. A description is presented of a model in which the delay and other characteristics of the observed time profiles in channels 1-5 are self-consistently explained by the increase of the electron energy loss time with electron energy.

Scientific Research: What it Means to Me.

PubMed

Narlikar, Jayant V

2008-01-01

This article gives a personal perception of the author, of what scientific research means. Citing examples from the lives of all time greats like Newton, Kelvin and Maxwell he stresses the agonies of thinking up new ideas, the urge for creativity and the pleasure one derives from the process when it is completed. He then narrates instances from his own life that proved inspirational towards his research career. In his early studenthood, his parents and maternal uncle had widened his intellectual horizons while in later life his interaction with Fred Hoyle made him take up research challenges away from the beaten path. He concludes that taking up an anti-Establishment stand in research can create many logistical difficulties, but the rewards of success are all the more pleasing.

Modeling and analysis of several classes of self-oscillating inverters. I - State-plane representations. II - Model extension, classification, and duality relationships

NASA Technical Reports Server (NTRS)

Lee, F. C. Y.; Wilson, T. G.

1982-01-01

The present investigation is concerned with an important class of power conditioning networks, taking into account self-oscillating dc-to-square-wave transistor inverters. The considered circuits are widely used both as the principal power converting and processing means in many systems and as low-power analog-to-discrete-time converters for controlling the switching of the output-stage semiconductors in a variety of power conditioning systems. Aspects of piecewise-linear modeling are discussed, taking into consideration component models, and an equivalent-circuit model. Questions of singular point analysis and state plane representation are also investigated, giving attention to limit cycles, starting circuits, the region of attraction, a hard oscillator, and a soft oscillator.

Design of on-line system for measuring and tracking time of assembly

NASA Astrophysics Data System (ADS)

Senderská, Katarína; Mareš, Albert; Evin, Emil

2016-04-01

Manual assembly performed at assembly workstations nowadays still has a unique place in different kinds of production. To increase the productivity and quality of manual assembly it is necessary to analyse the existing workplaces and find ways to improve and streamline work done at these workplaces. The article deals with the design of a model for on-line analysis of a manual assembly process. The proposed model is based on the use of sensors or the so-called button-box and the use of software for recording and evaluating data. Based on the obtained data it is then possible to evaluate the time characteristics of the assembly process, aswell as to find sources of delays and mistakes and then take appropriate action to correct them.

Why Health Promotion Needs to Change.

PubMed

Terry, Paul E

2018-01-01

If you ask most health professionals why they do what they do, they invariably speak of being of service. And being of service, for population health workers, becomes ever more meaningful as our work touches ever more lives. To wit, "Kaizen," a Japanese term meaning "change for better," sits shoulder to shoulder with our life's purpose. Health promotion professionals are high performers getting great results but we need to start working on our work. What would it take to increase our impact by 50%? And when we change our processes to accomplish that, what would we change next to get another 50% improvement? Only by stepping back and examining our processes can we see the time and motion required to make what's working now work better and be more accessible to more people next time.

Real Time Phase Noise Meter Based on a Digital Signal Processor

NASA Technical Reports Server (NTRS)

Angrisani, Leopoldo; D'Arco, Mauro; Greenhall, Charles A.; Schiano Lo Morille, Rosario

2006-01-01

A digital signal-processing meter for phase noise measurement on sinusoidal signals is dealt with. It enlists a special hardware architecture, made up of a core digital signal processor connected to a data acquisition board, and takes advantage of a quadrature demodulation-based measurement scheme, already proposed by the authors. Thanks to an efficient measurement process and an optimized implementation of its fundamental stages, the proposed meter succeeds in exploiting all hardware resources in such an effective way as to gain high performance and real-time operation. For input frequencies up to some hundreds of kilohertz, the meter is capable both of updating phase noise power spectrum while seamlessly capturing the analyzed signal into its memory, and granting as good frequency resolution as few units of hertz.

Kinetics analysis and quantitative calculations for the successive radioactive decay process

NASA Astrophysics Data System (ADS)

Zhou, Zhiping; Yan, Deyue; Zhao, Yuliang; Chai, Zhifang

2015-01-01

The general radioactive decay kinetics equations with branching were developed and the analytical solutions were derived by Laplace transform method. The time dependence of all the nuclide concentrations can be easily obtained by applying the equations to any known radioactive decay series. Taking the example of thorium radioactive decay series, the concentration evolution over time of various nuclide members in the family has been given by the quantitative numerical calculations with a computer. The method can be applied to the quantitative prediction and analysis for the daughter nuclides in the successive decay with branching of the complicated radioactive processes, such as the natural radioactive decay series, nuclear reactor, nuclear waste disposal, nuclear spallation, synthesis and identification of superheavy nuclides, radioactive ion beam physics and chemistry, etc.

An improved grey model for the prediction of real-time GPS satellite clock bias

NASA Astrophysics Data System (ADS)

Zheng, Z. Y.; Chen, Y. Q.; Lu, X. S.

2008-07-01

In real-time GPS precise point positioning (PPP), real-time and reliable satellite clock bias (SCB) prediction is a key to implement real-time GPS PPP. It is difficult to hold the nuisance and inenarrable performance of space-borne GPS satellite atomic clock because of its high-frequency, sensitivity and impressionable, it accords with the property of grey model (GM) theory, i. e. we can look on the variable process of SCB as grey system. Firstly, based on limits of quadratic polynomial (QP) and traditional GM to predict SCB, a modified GM (1,1) is put forward to predict GPS SCB in this paper; and then, taking GPS SCB data for example, we analyzed clock bias prediction with different sample interval, the relationship between GM exponent and prediction accuracy, precision comparison of GM to QP, and concluded the general rule of different type SCB and GM exponent; finally, to test the reliability and validation of the modified GM what we put forward, taking IGS clock bias ephemeris product as reference, we analyzed the prediction precision with the modified GM, It is showed that the modified GM is reliable and validation to predict GPS SCB and can offer high precise SCB prediction for real-time GPS PPP.

[Treatment of substance dependence by a bio-cognitive model based on behavioral pharmacology].

PubMed

Hori, Toru; Komiyama, Tokutaro; Harada, Seiichi; Matsumoto, Takenori

2005-01-01

We have introduced cognitive behavior therapy (CBT) into the treatment of substance dependence patients, which involves disease education and focused group therapy to obtain insight into the taking behavior and to establish concrete countermeasures to prevent relapse. We have created a bio-cognitive model based on biological aspects to explain the pathology of substance dependence. 'Dependence' is a term in behavioral pharmacology defined as reinforced drug seeking and taking behavior. Changes in taking behavior are thought to occur due to the repetition of the reinforcement action of psychoactive substances in the reward system of the brain. Therefore, when intake desire is strong, it is hard for patients to control themselves, and there is a feature of difficulties considering the process of thinking in CBT. In other words, when craving becomes strong, a chain of behavior happens spontaneously, without schema, involving automatic thoughts. We think that the improvement of protracted withdrawal syndrome (PWS) and entire frontal lobe function are important in learning to discern distortion of cognition. When PWS is improved, a conflict is easy to bring about in the process of drug seeking and taking behavior. And, it is easy to execute avoidance plans (coping skills) which are established to cope with craving in advance. We think that a goal for treatment is to discern drug seeking and taking behavior with natural emotion. The recovery of PWS and frontal lobe dysfunction takes a long time with a serious dependence, so we must perform repetition of CBT. As the treatment introduction of involuntary admission cases is adequate or cases of 1 to 3 months of admission treatment based on voluntary admission are hard to treat, treatment to obtain insights into patients while carrying out repeated CBT using a bio-cognitive model and to improve PWS could be a possibility as one treatment for the pathology of diversified substance dependence.

On the possibility of producing true real-time retinal cross-sectional images using a graphics processing unit enhanced master-slave optical coherence tomography system.

PubMed

Bradu, Adrian; Kapinchev, Konstantin; Barnes, Frederick; Podoleanu, Adrian

2015-07-01

In a previous report, we demonstrated master-slave optical coherence tomography (MS-OCT), an OCT method that does not need resampling of data and can be used to deliver en face images from several depths simultaneously. In a separate report, we have also demonstrated MS-OCT's capability of producing cross-sectional images of a quality similar to those provided by the traditional Fourier domain (FD) OCT technique, but at a much slower rate. Here, we demonstrate that by taking advantage of the parallel processing capabilities offered by the MS-OCT method, cross-sectional OCT images of the human retina can be produced in real time. We analyze the conditions that ensure a true real-time B-scan imaging operation and demonstrate in vivo real-time images from human fovea and the optic nerve, with resolution and sensitivity comparable to those produced using the traditional FD-based method, however, without the need of data resampling.

Effects of stiffness and volume on the transit time of an erythrocyte through a slit.

PubMed

Salehyar, Sara; Zhu, Qiang

2017-06-01

By using a fully coupled fluid-cell interaction model, we numerically simulate the dynamic process of a red blood cell passing through a slit driven by an incoming flow. The model is achieved by combining a multiscale model of the composite cell membrane with a boundary element fluid dynamics model based on the Stokes flow assumption. Our concentration is on the correlation between the transit time (the time it takes to finish the whole translocation process) and different conditions (flow speed, cell orientation, cell stiffness, cell volume, etc.) that are involved. According to the numerical prediction (with some exceptions), the transit time rises as the cell is stiffened. It is also highly sensitive to volume increase inside the cell. In general, even slightly swollen cells (i.e., the internal volume is increased while the surface area of the cell kept unchanged) travel dramatically slower through the slit. For these cells, there is also an increased chance of blockage.

Clinical image processing engine

NASA Astrophysics Data System (ADS)

Han, Wei; Yao, Jianhua; Chen, Jeremy; Summers, Ronald

2009-02-01

Our group provides clinical image processing services to various institutes at NIH. We develop or adapt image processing programs for a variety of applications. However, each program requires a human operator to select a specific set of images and execute the program, as well as store the results appropriately for later use. To improve efficiency, we design a parallelized clinical image processing engine (CIPE) to streamline and parallelize our service. The engine takes DICOM images from a PACS server, sorts and distributes the images to different applications, multithreads the execution of applications, and collects results from the applications. The engine consists of four modules: a listener, a router, a job manager and a data manager. A template filter in XML format is defined to specify the image specification for each application. A MySQL database is created to store and manage the incoming DICOM images and application results. The engine achieves two important goals: reduce the amount of time and manpower required to process medical images, and reduce the turnaround time for responding. We tested our engine on three different applications with 12 datasets and demonstrated that the engine improved the efficiency dramatically.