40 CFR 63.1322 - Batch process vents-reference control technology.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 12 2013-07-01 2013-07-01 false Batch process vents-reference control... (CONTINUED) National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins § 63.1322 Batch process vents—reference control technology. (a) Batch process vents. The owner or...

Innovation for maintenance technology improvements

NASA Technical Reports Server (NTRS)

Shives, T. R. (Editor); Willard, W. A. (Editor)

1982-01-01

A group of 34 submitted entries (32 papers and 2 abstracts) from the 33rd meeting of the Mechanical Failures Prevention Group whose subject was maintenance technology improvement through innovation. Areas of special emphasis included maintenance concepts, maintenance analysis systems, improved maintenance processes, innovative maintenance diagnostics and maintenance indicators, and technology improvements for power plant applications.

A Protocol Analysis of the Influence of Technology on Students' Actions, Verbal Commentary, and Thought Processes During the Performance of Acid-Base Titrations.

ERIC Educational Resources Information Center

Nakhleh, Mary B.; Krajcik, Joseph S.

1993-01-01

From an analysis of 14 secondary student's actions and thought processes, it was found that technology's level of information affected the focus of student observations. The microcomputer group focused primarily on the graph while other groups exhibited multiple foci. The discussion data also reveal that students have three main ideas about how…

Group decision making with the analytic hierarchy process in benefit-risk assessment: a tutorial.

PubMed

Hummel, J Marjan; Bridges, John F P; IJzerman, Maarten J

2014-01-01

The analytic hierarchy process (AHP) has been increasingly applied as a technique for multi-criteria decision analysis in healthcare. The AHP can aid decision makers in selecting the most valuable technology for patients, while taking into account multiple, and even conflicting, decision criteria. This tutorial illustrates the procedural steps of the AHP in supporting group decision making about new healthcare technology, including (1) identifying the decision goal, decision criteria, and alternative healthcare technologies to compare, (2) structuring the decision criteria, (3) judging the value of the alternative technologies on each decision criterion, (4) judging the importance of the decision criteria, (5) calculating group judgments, (6) analyzing the inconsistency in judgments, (7) calculating the overall value of the technologies, and (8) conducting sensitivity analyses. The AHP is illustrated via a hypothetical example, adapted from an empirical AHP analysis on the benefits and risks of tissue regeneration to repair small cartilage lesions in the knee.

Incorporating DSA in multipatterning semiconductor manufacturing technologies

NASA Astrophysics Data System (ADS)

Badr, Yasmine; Torres, J. A.; Ma, Yuansheng; Mitra, Joydeep; Gupta, Puneet

2015-03-01

Multi-patterning (MP) is the process of record for many sub-10nm process technologies. The drive to higher densities has required the use of double and triple patterning for several layers; but this increases the cost of the new processes especially for low volume products in which the mask set is a large percentage of the total cost. For that reason there has been a strong incentive to develop technologies like Directed Self Assembly (DSA), EUV or E-beam direct write to reduce the total number of masks needed in a new technology node. Because of the nature of the technology, DSA cylinder graphoepitaxy only allows single-size holes in a single patterning approach. However, by integrating DSA and MP into a hybrid DSA-MP process, it is possible to come up with decomposition approaches that increase the design flexibility, allowing different size holes or bar structures by independently changing the process for every patterning step. A simple approach to integrate multi-patterning with DSA is to perform DSA grouping and MP decomposition in sequence whether it is: grouping-then-decomposition or decomposition-then-grouping; and each of the two sequences has its pros and cons. However, this paper describes why these intuitive approaches do not produce results of acceptable quality from the point of view of design compliance and we highlight the need for custom DSA-aware MP algorithms.

DEMONSTRATION BULLETIN: TERRA KLEEN SOLVENT EXTRACTION TECHNOLOGY - TERRA-KLEEN RESPONSE GROUP, INC.

EPA Science Inventory

The Terra-Kleen Solvent Extraction Technology was developed by Terra-Kleen Response Group, Inc., to remove polychlorinated biphenyls (PCB) and other organic constituents from contaminated soil. This batch process system uses a proprietary solvent at ambient temperatures to treat ...

Influences on selection of assistive technology for young children in South Africa: perspectives from rehabilitation professionals.

PubMed

van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin

2017-12-20

Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive technology and users within the particular context. Facilitating the availability of assistive technology for trial during assessment and/or for a period afterwards will increase the likelihood that appropriate recommendations for assistive technology are made.

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

Designing the Group Use Videodisc: Socializing Communication Technology.

ERIC Educational Resources Information Center

Acker, Stephen R.; Gordon, Joan M.

1987-01-01

Indicates that students were favorably impressed with their videodisc learning experience, though the process of reaching consensus seemed to require the re-ordering of individual rankings. Discusses the relationships between design strategy, student interaction in the learning process, and funding educational technology. (JD)

Consumer concerns and expectations about novel food processing technologies: effects on product liking.

PubMed

Cardello, Armand V

2003-06-01

Eighty-eight consumers participated in a blind pre-test in which they rated their baseline preference for chocolate pudding, their liking of three tasted brands of chocolate pudding, and their level of concern for 20 different food processing and preservation technologies. All returned one month later and tasted the same puddings, but this time they were informed that they had been processed by one of several different novel or traditional food processing techniques. Different sub-groups were informed of the name of the process, the name plus a factual description of the process, or the name, the factual description, plus a benefit statement. Ratings of expected liking were obtained before and after viewing the samples, but before tasting them. Finally, subjects tasted and rated the products for actual liking and a sub-group rated their concern levels for the same 20 technologies rated in the pre-test. Pre-test results showed females to have significantly higher concern levels for all technologies. Individuals who had demonstrated a willingness to consume foods processed by one novel technology (irradiation) had lower concern ratings for all technologies. Ratings of concern were negatively correlated with expected liking for products believed to be processed by the technologies. Expected liking ratings were positively influenced by visual exposure to the product and by a safety and benefit statement. Linear regression of the change in product liking as a function of whether products were better or worse than expected supported an assimilation model of the effect of disconfirmed expectations on liking/disliking. Lastly, post-test concern levels for many of the technologies were reduced by participation in the study.

Terra-Kleen Response Group, Inc. Solvent Extraction Technology Rapid Commercialization Initiative Report

EPA Science Inventory

Terra-Kleen Response Group Inc. (Terra-Kleen), has commercialized a solvent extraction technology that uses a proprietary extraction solvent to transfer organic constituents from soil to a liquid phase in a batch process at ambient temperatures. The proprietary solvent has a rel...

Software Technology Transfer and Export Control.

DTIC Science & Technology

1981-01-01

development projects of their own. By analogy, a Soviet team might be able to repeat the learning experience of the ADEPT-50 junior staff...recommendations concerning product form and further study . The posture of this group has been to consider software technology and its transfer as a process...and views of the Software Subgroup of Technical Working Group 7 (Computers) of the Critical Technologies Project . The work reported

40 CFR 63.126 - Transfer operations provisions-reference control technology.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Wastewater § 63.126 Transfer operations provisions—reference control technology. (a) For each Group 1... control device. (1) Each vapor collection system shall be designed and operated to collect the organic... process, fuel gas system, or control device shall be operating. (b) For each Group 1 transfer rack the...

Applying graphics user interface ot group technology classification and coding at the Boeing aerospace company

NASA Astrophysics Data System (ADS)

Ness, P. H.; Jacobson, H.

1984-10-01

The thrust of 'group technology' is toward the exploitation of similarities in component design and manufacturing process plans to achieve assembly line flow cost efficiencies for small batch production. The systematic method devised for the identification of similarities in component geometry and processing steps is a coding and classification scheme implemented by interactive CAD/CAM systems. This coding and classification scheme has led to significant increases in computer processing power, allowing rapid searches and retrievals on the basis of a 30-digit code together with user-friendly computer graphics.

Technology Access for Arkansans: Project TAARK. Proceedings of the Planning Conference Held at DeGray Lodge (DeGray State Park, Arkansas, March 22-23, 1989).

ERIC Educational Resources Information Center

VanBiervliet, Alan; Parette, Howard P., Jr.

The Technology Access for Arkansans (TAARK) project has focused on identifying the need for and quality of technology provisions for the disabled in the state, disseminating information, and developing a state plan. This paper summarizes meetings held by six study groups formed to facilitate the planning process. Each group was assigned a specific…

Spontaneous Group Learning in Ambient Learning Environments

NASA Astrophysics Data System (ADS)

Bick, Markus; Jughardt, Achim; Pawlowski, Jan M.; Veith, Patrick

Spontaneous Group Learning is a concept to form and facilitate face-to-face, ad-hoc learning groups in collaborative settings. We show how to use Ambient Intelligence to identify, support, and initiate group processes. Learners' positions are determined by widely used technologies, e.g., Bluetooth and WLAN. As a second step, learners' positions, tasks, and interests are visualized. Finally, a group process is initiated supported by relevant documents and services. Our solution is a starting point to develop new didactical solutions for collaborative processes.

The Influence of Interactive Multimedia Technology to Enhance Achievement Students on Practice Skills in Mechanical Technology

NASA Astrophysics Data System (ADS)

Made Rajendra, I.; Made Sudana, I.

2018-01-01

Interactive multimedia technology empowers the educational process by means of increased interaction between teachers and the students. The utilization of technology in the instructional media development has an important role in the increase of the quality of teaching and learning achievements of students. The application of multimedia technology in the instructional media development is able to integrate aspects of knowledge and skills. The success of multimedia technology has revolutionized teaching and learning methods. The design of the study was quasi-experimental with pre and post. The instrument used is the form of questionnaires and tests This study reports research findings indicated that there is a significance difference between the mean performances of students in the experimental group than those students in the control group. The students in the experimental group performed better in mechanical technology practice and in retention test than those in the control group. The study recommended that multimedia instructional tool is an effective tool to enhance achievement students on practice skills in mechanical Technology.

The impact of video technology on learning: A cooking skills experiment.

PubMed

Surgenor, Dawn; Hollywood, Lynsey; Furey, Sinéad; Lavelle, Fiona; McGowan, Laura; Spence, Michelle; Raats, Monique; McCloat, Amanda; Mooney, Elaine; Caraher, Martin; Dean, Moira

2017-07-01

This study examines the role of video technology in the development of cooking skills. The study explored the views of 141 female participants on whether video technology can promote confidence in learning new cooking skills to assist in meal preparation. Prior to each focus group participants took part in a cooking experiment to assess the most effective method of learning for low-skilled cooks across four experimental conditions (recipe card only; recipe card plus video demonstration; recipe card plus video demonstration conducted in segmented stages; and recipe card plus video demonstration whereby participants freely accessed video demonstrations as and when needed). Focus group findings revealed that video technology was perceived to assist learning in the cooking process in the following ways: (1) improved comprehension of the cooking process; (2) real-time reassurance in the cooking process; (3) assisting the acquisition of new cooking skills; and (4) enhancing the enjoyment of the cooking process. These findings display the potential for video technology to promote motivation and confidence as well as enhancing cooking skills among low-skilled individuals wishing to cook from scratch using fresh ingredients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Energy technology evaluation report: Energy security

NASA Astrophysics Data System (ADS)

Koopman, R.; Lamont, A.; Schock, R.

1992-09-01

Energy security was identified in the National Energy Strategy (NES) as a major issue for the Department of Energy (DOE). As part of a process designed by the DOE to identify technologies important to implementing the NES, an expert working group was convened to consider which technologies can best contribute to reducing the nation's economic vulnerability to future disruptions of world oil supplies, the working definition of energy security. Other working groups were established to deal with economic growth, environmental quality, and technical foundations. Energy Security working group members were chosen to represent as broad a spectrum of energy supply and end-use technologies as possible and were selected for their established reputations as experienced experts with an ability to be objective. The time available for this evaluation was very short. The group evaluated technologies using criteria taken from the NES which can be summarized for energy security as follows: diversifying sources of world oil supply so as to decrease the increasing monopoly status of the Persian Gulf region; reducing the importance of oil use in the US economy to diminish the impact of future disruptions in oil supply; and increasing the preparedness of the US to deal with oil supply disruptions by having alternatives available at a known price. The result of the first phase of the evaluation process was the identification of technology groups determined to be clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were mostly within the high leverage areas of oil and gas supply and transportation demand but also included hydrogen utilization, biomass, diversion resistant nuclear power, and substitute industrial feedstocks.

Implementation of Quality Management in Core Service Laboratories

PubMed Central

Creavalle, T.; Haque, K.; Raley, C.; Subleski, M.; Smith, M.W.; Hicks, B.

2010-01-01

CF-28 The Genetics and Genomics group of the Advanced Technology Program of SAIC-Frederick exists to bring innovative genomic expertise, tools and analysis to NCI and the scientific community. The Sequencing Facility (SF) provides next generation short read (Illumina) sequencing capacity to investigators using a streamlined production approach. The Laboratory of Molecular Technology (LMT) offers a wide range of genomics core services including microarray expression analysis, miRNA analysis, array comparative genome hybridization, long read (Roche) next generation sequencing, quantitative real time PCR, transgenic genotyping, Sanger sequencing, and clinical mutation detection services to investigators from across the NIH. As the technology supporting this genomic research becomes more complex, the need for basic quality processes within all aspects of the core service groups becomes critical. The Quality Management group works alongside members of these labs to establish or improve processes supporting operations control (equipment, reagent and materials management), process improvement (reengineering/optimization, automation, acceptance criteria for new technologies and tech transfer), and quality assurance and customer support (controlled documentation/SOPs, training, service deficiencies and continual improvement efforts). Implementation and expansion of quality programs within unregulated environments demonstrates SAIC-Frederick's dedication to providing the highest quality products and services to the NIH community.

The Conceptualization of the Mathematical Modelling Process in Technology-Aided Environment

ERIC Educational Resources Information Center

Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The aim of the study is to conceptualize the technology-aided mathematical modelling process in the frame of cognitive modelling perspective. The grounded theory approach was adopted in the study. The research was conducted with seven groups consisting of nineteen prospective mathematics teachers. The data were collected from the video records of…

"I Tolerate Technology--I Don't Embrace It": Instructor Surprise and Sensemaking in a Technology-Rich Learning Environment

ERIC Educational Resources Information Center

Fairchild, Jennifer L.; Meiners, Eric B.; Violette, Jayne L.

2016-01-01

Assuming a dialectical approach to technology and pedagogy, this study explores sensemaking processes for instructors teaching in a technologically enhanced college classroom environment. Through a series of semi-structured individual and group interviews, seven instructors provided narrative accounts of the problems encountered with progressive…

Social process and the assessment of a new imaging technique.

PubMed

Blume, S S

1993-01-01

Each group involved in the development of a new medical technology constantly assesses the value of the emergent technique in terms of the group's own specific goals and conventions. The history of infrared thermography demonstrates the social nature of this assessment process.

Health technology assessment process of a cardiovascular medical device in four different settings.

PubMed

Olry de Labry Lima, Antonio; Espín Balbino, Jaime; Lemgruber, Alexandre; Caro Martínez, Araceli; García-Mochón, Leticia; Martín Ruiz, Eva; Lessa, Fernanda

2017-10-01

Health technology assessment (HTA) is a tool to help the decision-making process. The aim is to describe methods and processes used in the reimbursement decision making for drug-eluting stents (DES) in four different settings. DES as a technology under study was selected according to different criteria, all of them agreed by a working group. A survey of key informants was designed. DES was evaluated following well-structured HTA processes. Nonetheless, scope for improvement was observed in relation to the data considered for the final decision, the transparency and inclusiveness of the process as well as in the methods employed. An attempt to describe the HTA processes of a well-known medical device.

What Librarians Need to Know to Survive in an Age of Technology.

ERIC Educational Resources Information Center

Malinconico, S. Michael

1992-01-01

Discusses the changing library environment, with greater reliance on technology; and describes relevant skills for librarians, including communicating with nonlibrarians, working with group processes, understanding the capabilities of information-handling technologies, and developing management and marketing abilities. (21 references) (EA)

40 CFR 65.3 - Compliance with standards and operation and maintenance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...)(4)(i) and (ii) do not apply to Group 2A or Group 2B process vents. Compliance with design, equipment... include, but are not limited to, air pollution control technologies, recovery technologies, work practices... control devices are not required but may be used if available. This paragraph (a)(3) does not apply to...

40 CFR 65.3 - Compliance with standards and operation and maintenance requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...)(4)(i) and (ii) do not apply to Group 2A or Group 2B process vents. Compliance with design, equipment... include, but are not limited to, air pollution control technologies, recovery technologies, work practices... control devices are not required but may be used if available. This paragraph (a)(3) does not apply to...

Using a Technology-Based Case to Aid in Improving Assessment

ERIC Educational Resources Information Center

Zelin, Robert C., II

2008-01-01

This paper describes how a technology-based case using Microsoft Access can aid in the assessment process. A case was used in lieu of giving a final examination in an Accounting Information Systems course. Students worked in small groups to design a database-driven payroll system for a hypothetical company. Each group submitted its results along…

Sustainable and consumer-friendly emerging technologies for application within the meat industry: An overview.

PubMed

Troy, Declan J; Ojha, Kumari Shikha; Kerry, Joseph P; Tiwari, Brijesh K

2016-10-01

New and emerging robust technologies can play an important role in ensuring a more resilient meat value chain and satisfying consumer demands and needs. This paper outlines various novel thermal and non-thermal technologies which have shown potential for meat processing applications. A number of process analytical techniques which have shown potential for rapid, real-time assessment of meat quality are also discussed. The commercial uptake and consumer acceptance of novel technologies in meat processing have been subjects of great interest over the past decade. Consumer focus group studies have shown that consumer expectations and liking for novel technologies, applicable to meat processing applications, vary significantly. This overview also highlights the necessity for meat processors to address consumer risk-benefit perceptions, knowledge and trust in order to be commercially successful in the application of novel technologies within the meat sector. Copyright © 2016. Published by Elsevier Ltd.

The use of conferencing technologies to support drug policy group knowledge exchange processes: an action case approach.

PubMed

Househ, Mowafa Said; Kushniruk, Andre; Maclure, Malcolm; Carleton, Bruce; Cloutier-Fisher, Denise

2011-04-01

To describe experiences, lessons and the implications related to the use of conferencing technology to support three drug policy research groups within a three-year period, using the action case research method. An action case research field study was executed. Three different drug policy groups participated: research, educator, and decision-maker task groups. There were a total of 61 participants in the study. The study was conducted between 2004 and 2007. Each group used audio-teleconferencing, web-conferencing or both to support their knowledge exchange activities. Data were collected over three years and consisted of observation notes, interviews, and meeting transcripts. Content analysis was used to analyze the data using NIVIO qualitative data analysis software. The study found six key lessons regarding the impact of conferencing technologies on knowledge exchange within drug policy groups. We found that 1) groups adapt to technology to facilitate group communication, 2) web-conferencing communication is optimal under certain conditions, 3) audio conferencing is convenient, 4) web-conferencing forces group interactions to be "within text", 5) facilitation contributes to successful knowledge exchange, and 6) technology impacts information sharing. This study highlights lessons related to the use of conferencing technologies to support distant knowledge exchange within drug policy groups. Key lessons from this study can be used by drug policy groups to support successful knowledge exchange activities using conferencing technologies. 2010 Elsevier Ireland Ltd. All rights reserved.

Application of Technology to Cognitive Development.

ERIC Educational Resources Information Center

Wilson, Louise

This report presents a summary of research being conducted at the University of Minnesota in which new technologies are being applied to development of cognition in hearing impaired learners. The study involved an application of concept analysis, information-processing theories, and group-based interactive technology in the teaching of…

Examining Educational Climate Change Technology: How Group Inquiry Work with Realistic Scientific Technology Alters Classroom Learning

ERIC Educational Resources Information Center

Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

2018-01-01

This study with 79 students in Montreal, Quebec, compared the educational use of a National Aeronautics and Space Administration (NASA) global climate model (GCM) to climate education technologies developed for classroom use that included simpler interfaces and processes. The goal was to show how differing climate education technologies succeed…

Effect of technology on aging perception.

PubMed

Juárez, Ma Rodrigo; González, Víctor M; Favela, Jesús

2018-06-01

Technology can assist older adults to maintain an active lifestyle. To better understand the effect that technology has on aging perception, we conducted two studies. In the first study, through supraliminal priming, we analyzed the effects of aging- and technology-related stimuli on age estimation. In the second study, we conducted a technological intervention with a group of elders who used four interactive devices and analyzed effects on perceived aging. Results showed that technology-related stimuli did not affect estimated age. From the second study, we generated a sociotechnical model that explains the processes connecting technology use with successful aging. We concluded that the use of technology affects aging perception, although it depends on whether the elder people have a proactive attitude toward their aging process a priori.

Consumer perspectives on assistive technology outcomes.

PubMed

Lenker, James A; Harris, Frances; Taugher, Mary; Smith, Roger O

2013-09-01

The current study explored domains of assistive technology (AT) device outcomes that are most valued by AT users. A secondary objective was to identify elements in the device acquisition process that affect outcomes. Focus groups were conducted at geographically dispersed locations within the USA. The groups were moderated by experienced AT practitioners who followed a detailed procedure emphasizing a nominal group facilitation technique. Twenty-four adult AT users, representing a range of ages and disability populations, participated in four focus groups. Many had over 15 years of experience with multiple device types. Qualitative analysis yielded 13 threads that embodied salient outcome domains (e.g. independence, subjective well-being, participation in work and school, cost-effectiveness) and key factors associated with the device acquisition process (e.g. lengthy periods of frustration, variable quality of service providers). Ironically, these data were evoked only after the term "outcomes" was omitted from focus group questions. AT outcomes studies are needed that report data regarding (a) the impact of AT on participation, (b) costs of AT provision and (c) key elements in the AT service delivery process. Future studies will be further strengthened to the extent that their methodologies actively assimilate consumer perspectives. Implications for Rehabilitation Consumers highly value the impact of AT devices on their independence, subjective well-being and participation in work and school. The process of acquiring assistive technology devices is often lengthy and frustrating for consumers. Future AT outcomes research should report descriptive data regarding service delivery processes, as well as long-term impacts for consumers. Practitioners and researchers should avoid the use of potentially confusing professional jargon when administering surveys to consumers.

Technology and Community Behavior in Online Environments

NASA Astrophysics Data System (ADS)

Blanchard, Anita L.; Markus, M. Lynne

The literature on virtual or online communities contains two largely disjoint bodies of scholarship. One, which we call the “communities” literature, is concerned primarily with the social and psychological processes observable within groups of people that interact regularly in online environments. The other, concerned primarily with the effects of technological environments on individual and group behavior, we call the “environments” literature.

Technology Needs to Support Future Mars Exploration

NASA Technical Reports Server (NTRS)

Nilsen, Erik N.; Baker, John; Lillard, Randolph P.

2013-01-01

The Mars Program Planning Group (MPPG) under the direction of Dr. Orlando Figueroa, was chartered to develop options for a program-level architecture for robotic exploration of Mars consistent with the objective to send humans to Mars in the 2030's. Scientific pathways were defined for future exploration, and multiple architectural options were developed that meet current science goals and support the future human exploration objectives. Integral to the process was the identification of critical technologies which enable the future scientific and human exploration goals. This paper describes the process for technology capabilities identification and examines the critical capability needs identified in the MPPG process. Several critical enabling technologies that have been identified to support the robotic exploration goals and with potential feedforward application to human exploration goals. Potential roadmaps for the development and validation of these technologies are discussed, including options for subscale technology demonstrations of future human exploration technologies on robotic missions.

Examining Educational Climate Change Technology: How Group Inquiry Work with Realistic Scientific Technology Alters Classroom Learning

NASA Astrophysics Data System (ADS)

Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

2018-04-01

This study with 79 students in Montreal, Quebec, compared the educational use of a National Aeronautics and Space Administration (NASA) global climate model (GCM) to climate education technologies developed for classroom use that included simpler interfaces and processes. The goal was to show how differing climate education technologies succeed and fail at getting students to evolve in their understanding of anthropogenic global climate change (AGCC). Many available climate education technologies aim to convey key AGCC concepts or Earth systems processes; the educational GCM used here aims to teach students the methods and processes of global climate modeling. We hypothesized that challenges to learning about AGCC make authentic technology-enabled inquiry important in developing accurate understandings of not just the issue but how scientists research it. The goal was to determine if student learning trajectories differed between the comparison and treatment groups based on whether each climate education technology allowed authentic scientific research. We trace learning trajectories using pre/post exams, practice quizzes, and written student reflections. To examine the reasons for differing learning trajectories, we discuss student pre/post questionnaires, student exit interviews, and 535 min of recorded classroom video. Students who worked with a GCM demonstrated learning trajectories with larger gains, higher levels of engagement, and a better idea of how climate scientists conduct research. Students who worked with simpler climate education technologies scored lower in the course because of lower levels of engagement with inquiry processes that were perceived to not actually resemble the work of climate scientists.

[The characteristics of medical technologies in emergency medical care hospital].

PubMed

Murakhovskiĭ, A G; Babenko, A I; Bravve, Iu I; Tataurova, E A

2013-01-01

The article analyzes the implementation of major 12 diagnostic and 17 treatment technologies applied during medical care of patients with 12 key nosology forms of diseases in departments of the emergency medical care hospital No 2 of Omsk. It is established that key groups of technologies in the implementation of diagnostic process are the laboratory clinical diagnostic analyses and common diagnostic activities at reception into hospital and corresponding departments. The percentage of this kind of activities is about 78.3% of all diagnostic technologies. During the realization of treatment process the priority technologies are common curative and rehabilitation activities, intensive therapy activities and clinical diagnostic monitoring activities. All of them consist 80.1% of all curative technologies.

A Comparative Analysis of Preferred Learning and Teaching Styles for Engineering, Industrial, and Technology Education Students and Faculty

ERIC Educational Resources Information Center

Katsioloudis, Petros; Fantz, Todd D.

2012-01-01

In the spring semester of 2010, a materials process course was selected as a means to perform a preferred learning style research study. This course was selected because it contained three groups of students: technology education, engineering technology, and industrial technology. The researchers believed that the differences in the students'…

The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

ERIC Educational Resources Information Center

Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

2013-01-01

This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

Actor Diversity and Interactions in the Development of Banana Hybrid Varieties in Uganda: Implications for Technology Uptake

ERIC Educational Resources Information Center

Sanya, Losira Nasirumbi; Sseguya, Haroon; Kyazze, Florence Birungi; Baguma, Yona; Kibwika, Paul

2018-01-01

Purpose: We examine the nature of networks through which new hybrid banana varieties (HBVs) in Uganda are developed, and how different actors engage in the technology development process. Design/methodology/approach: We collected the data through 20 key informant interviews and 5 focus group discussions with actors involved in the process. We…

Making Technology Ready: Integrated Systems Health Management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Oliver, Patrick J.

2007-01-01

This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

Engineering Design and Automation in the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wantuck, P. J.; Hollen, R. M.

2002-01-01

This paper provides an overview of some design and automation-related projects ongoing within the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory. AET uses a diverse set of technical capabilities to develop and apply processes and technologies to applications for a variety of customers both internal and external to the Laboratory. The Advanced Recovery and Integrated Extraction System (ARIES) represents a new paradigm for the processing of nuclear material from retired weapon systems in an environment that seeks to minimize the radiation dose to workers. To achieve this goal, ARIES relies upon automation-based features to handle and processmore » the nuclear material. Our Chemical Process Development Team specializes in fuzzy logic and intelligent control systems. Neural network technology has been utilized in some advanced control systems developed by team members. Genetic algorithms and neural networks have often been applied for data analysis. Enterprise modeling, or discrete event simulation, as well as chemical process simulation has been employed for chemical process plant design. Fuel cell research and development has historically been an active effort within the AET organization. Under the principal sponsorship of the Department of Energy, the Fuel Cell Team is now focusing on technologies required to produce fuel cell compatible feed gas from reformation of a variety of conventional fuels (e.g., gasoline, natural gas), principally for automotive applications. This effort involves chemical reactor design and analysis, process modeling, catalyst analysis, as well as full scale system characterization and testing. The group's Automation and Robotics team has at its foundation many years of experience delivering automated and robotic systems for nuclear, analytical chemistry, and bioengineering applications. As an integrator of commercial systems and a developer of unique custom-made systems, the team currently supports the automation needs of many Laboratory programs.« less

15 CFR 750.4 - Procedures for processing license applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... interagency groups established to provide expertise and coordinate interagency consultation. These interagency groups consist of: (i) The Missile Technology Export Control Group (MTEC). The MTEC, chaired by the... paper copy. (d) Review by other agencies and/or interagency groups. (1) Within 10 days of receipt of a...

15 CFR 750.4 - Procedures for processing license applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... interagency groups established to provide expertise and coordinate interagency consultation. These interagency groups consist of: (i) The Missile Technology Export Control Group (MTEC). The MTEC, chaired by the... paper copy. (d) Review by other agencies and/or interagency groups. (1) Within 10 days of receipt of a...

15 CFR 750.4 - Procedures for processing license applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... interagency groups established to provide expertise and coordinate interagency consultation. These interagency groups consist of: (i) The Missile Technology Export Control Group (MTEC). The MTEC, chaired by the... paper copy. (d) Review by other agencies and/or interagency groups. (1) Within 10 days of receipt of a...

15 CFR 750.4 - Procedures for processing license applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... interagency groups established to provide expertise and coordinate interagency consultation. These interagency groups consist of: (i) The Missile Technology Export Control Group (MTEC). The MTEC, chaired by the... paper copy. (d) Review by other agencies and/or interagency groups. (1) Within 10 days of receipt of a...

15 CFR 750.4 - Procedures for processing license applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... interagency groups established to provide expertise and coordinate interagency consultation. These interagency groups consist of: (i) The Missile Technology Export Control Group (MTEC). The MTEC, chaired by the... paper copy. (d) Review by other agencies and/or interagency groups. (1) Within 10 days of receipt of a...

[REACTIVE CHANGES IN SPINAL CORD MOTONEURONS AFTER SCIATIC NERVE INJURY AFTER HIGH-FREQUENCY ELECTROSURGICAL INSTRUMENT APPLICATION].

PubMed

Korsak, A; Chaikovsky, Yu; Sokurenko, L; Likhodiievskyi, V; Neverovskyi, A

2016-02-01

A new experimental model for tissues connection at peripheral nerve injury site in form of tissues welding was designed. In current study we investigated motoneuron state 1, 3, 6 and 12 weeks after peripheral nerve injury and surgical repair with high-frequency electrosurgical technology. Spinal cord sections was stained by Nissl method and observed with light microscopy. We found that postoperative period in animals from experimental groups characterized by qualitative changes in neurons from spinal motor centers that can be interpreted as compensatory processes as response to alteration. In animals from group with high-frequency electrosurgical technology usage stabilization processes passes more quickly comparatively to animals with epineural sutures. High-frequency electrosurgical technology usage provides less harmful effects on motoneurons than epineural suturing.

Patient safety and technology-driven medication - A qualitative study on how graduate nursing students navigate through complex medication administration.

PubMed

Orbæk, Janne; Gaard, Mette; Fabricius, Pia; Lefevre, Rikke S; Møller, Tom

2015-05-01

The technology-driven medication process is complex, involving advanced technologies, patient participation and increased safety measures. Medication administration errors are frequently reported, with nurses implicated in 26-38% of in-hospital cases. This points to the need for new ways of educating nursing students in today's medication administration. To explore nursing students' experiences and competences with the technology-driven medication administration process. 16 pre-graduate nursing students were included in two focus group interviews which were recorded, transcribed and analyzed using the systematic horizontal phenomenological-hermeneutic template methodology. The interviews uncovered that understanding the technologies; professionalism and patient safety are three crucial elements in the medication process. The students expressed positivity and confidence in using technology, but were fearful of committing serious medication errors. From the nursing students' perspective, experienced nurses deviate from existing guidelines, leaving them feeling isolated in practical learning situations. Having an unclear nursing role model for the technology-driven medication process, nursing students face difficulties in identifying and adopting best practices. The impact of using technology on the frequency, type and severity of medication errors; the technologies implications on nursing professionalism and the nurses ability to secure patient adherence to the medication process, still remains to be studied. Copyright © 2014 Elsevier Ltd. All rights reserved.

Identifying research needs for wheelchair transfers in the built environment.

PubMed

Crytzer, Theresa Marie; Cooper, Rory; Jerome, Genevieve; Koontz, Alicia

2017-02-01

The purpose of this study is to describe the results of focus groups held during the Independent Wheelchair Transfer (IWT) Workgroup. The aims were to facilitate exchange of ideas on (1) the impact of the built environment on the wheelchair transfer process within the community (i.e. moving from wheelchair to and from other surfaces (e.g. furniture, toilet seat, bath bench, car seat) to participate in daily activities), (2) wheelchair users' needs during transfers in the built environment, and (3) future research directions. Live web-based conferencing using Adobe Connect technology (Clarix Technologies, Inc., Pittsford, NY) was utilized to conduct three focus groups composed of experts in the field of assistive technology. Investigators independently reviewed focus group meeting transcripts and used qualitative methods to identify main themes. Thirty-one experts in assistive technology and related fields participated in focus groups. Nine main themes were found including the effect of transfer skills training, space considerations in the built environment, wheelchair configuration, and the interaction between the built environment, user preferences, and transfer techniques. All groups raised issues about the transfer process in areas of the built environment with limited access, the effect of wheelchair users' transfer techniques, and user preferences during transfers. The area of independent transfers is multi-faceted and several factors require consideration when contemplating environmental changes to improve accessibility for wheelchair users. Obvious opportunity exists for research which could lead to advances in transfer technology, environments, and techniques for wheelchair users. Implications for Rehabilitation Tremendous opportunities for research collaborations in the field of assistive technology: To develop new terminology to describe wheelchair transfers. To improve the design of the built environment for wheelchair users. To investigate wheelchair transfer training techniques.

Usability of clinical decision support system as a facilitator for learning the assistive technology adaptation process.

PubMed

Danial-Saad, Alexandra; Kuflik, Tsvi; Weiss, Patrice L Tamar; Schreuer, Naomi

2016-01-01

The aim of this study was to evaluate the usability of Ontology Supported Computerized Assistive Technology Recommender (OSCAR), a Clinical Decision Support System (CDSS) for the assistive technology adaptation process, its impact on learning the matching process, and to determine the relationship between its usability and learnability. Two groups of expert and novice clinicians (total, n = 26) took part in this study. Each group filled out system usability scale (SUS) to evaluate OSCAR's usability. The novice group completed a learning questionnaire to assess OSCAR's effect on their ability to learn the matching process. Both groups rated OSCAR's usability as "very good", (M [SUS] = 80.7, SD = 11.6, median = 83.7) by the novices, and (M [SUS] = 81.2, SD = 6.8, median = 81.2) by the experts. The Mann-Whitney results indicated that no significant differences were found between the expert and novice groups in terms of OSCAR's usability. A significant positive correlation existed between the usability of OSCAR and the ability to learn the adaptation process (rs = 0.46, p = 0.04). Usability is an important factor in the acceptance of a system. The successful application of user-centered design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically in developing other systems. Implications for Rehabilitation Creating a CDSS with a focus on its usability is an important factor for its acceptance by its users. Successful usability outcomes can impact the learning process of the subject matter in general, and the AT prescription process in particular. The successful application of User-Centered Design principles during the development of OSCAR may serve as a case study that models the significant elements to be considered, theoretically and practically. The study emphasizes the importance of close collaboration between the developers and the end users.

Telematics and Electronic Communication and Their Effect on Educational Space. [Brief No.] 3.

ERIC Educational Resources Information Center

Morton, James E.

A telematics and electronic communication task group examines technology's influence on the educational process as well as the physical classroom, and the needs and concerns these new technologies bring to architects and educators in designing an adaptable classroom. Technology and the classroom are examined in the following areas: the use of…

Young Children's Views of the Technology Process: An Exploratory Study

ERIC Educational Resources Information Center

Milne, Louise; Edwards, Richard

2013-01-01

This paper describes an exploratory study of an aspect of the technological knowledge of two groups of five-year-old students in their first year at school. Their emerging understandings of the steps required to develop a new product were investigated through a series of interviews. A theoretical framework linking technological knowledge to "funds…

Investigation of Techno-Stress Levels of Teachers Who Were Included in Technology Integration Processes

ERIC Educational Resources Information Center

Çoklar, Ahmet Naci; Efilti, Erkan; Sahin, Yusef Levent; Akçay, Arif

2016-01-01

Techno-stress is defined as a modern adaptation disorder resulting from the failure in coping with new technologies in a healthy way. Techno-stress affects many occupational groups, including teachers. FATIH project and many other previous studies conducted in Turkey in recent years have necessitated the use of technology for teachers. The present…

Experiments with Analytic Centers: A confluence of data, tools and help in using them.

NASA Astrophysics Data System (ADS)

Little, M. M.; Crichton, D. J.; Hines, K.; Cole, M.; Quam, B. M.

2017-12-01

Traditional repositories have been primarily focused on data stewardship. Over the past two decades, data scientists have attempted to overlay a superstructure to make these repositories more amenable to analysis tasks, with limited success. This poster will summarize lessons learned and some realizations regarding what it takes to create an analytic center. As the volume of Earth Science data grows and the sophistication of analytic tools improves, a pattern has emerged that indicates different science communities uniquely apply a selection of tools to the data to produce scientific results. Infrequently do the experiences of one group help steer other groups. How can the information technology community seed these domains with tools that conform to the thought processes and experiences of that particular science group? What types of succcessful technology infusions have occured and how does technology get adopted. AIST has been experimenting with the management of this analytic center process; this paper will summarize the results and indicate a direction for future infusion attempts.

Advanced technology for America's future in space

NASA Technical Reports Server (NTRS)

1990-01-01

In response to Recommendation 8 of the Augustine Committee Report, NASA's Office of Aeronautics, Exploration and Technology (OAET) developed a proposed 'Integrated Technology Plan for the Civil Space Program' that entails substantial changes in the processes, structure and the content of NASA's space research and technology program. The Space Systems and Technology Advisory Committee (SSTAC, a subcommittee of the NASA Advisory Committee) and several other senior, expert, informed advisory groups conducted a review of NASA's proposed Integrated Technology Plan (ITP). This review was in response to the specific request in Recommendation 8 that 'NASA utilize an expert, outside review process, managed from headquarters, to assist in the allocation of technology funds'. This document, the final report from that review, addresses: (1) summary recommendations; (2) mission needs; (3) the integrated technology plan; (4) summary reports of the technical panels; and (5) conclusions and observations.

Selection of shuttle payload data processing drivers for the data system new technology study

NASA Technical Reports Server (NTRS)

1976-01-01

An investigation of all payloads in the IBM disciplines and the selection of driver payloads within each discipline are described. The driver payloads were selected on the basis of their data processing requirements. These requirements are measured by a weighting scheme. The total requirements for each discipline are estimated by use of the technology payload model. The driver selection process which was both a payload by payload comparison and a comparison of expected groupings of payloads was examined.

Materials processing in space program tasks-supplement

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1983-01-01

An overview of the program scope for managers and scientists in industry, university, and government communities is provided. An introductory description of the program, its history, strategy, and overall goals; identification of the organizational structures and people involved; and a description of each research task, together with a list of recent publications are included. The tasks are grouped into six categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies; combustion experiments; and experimental technology.

Statistical process management: An essential element of quality improvement

NASA Astrophysics Data System (ADS)

Buckner, M. R.

Successful quality improvement requires a balanced program involving the three elements that control quality: organization, people and technology. The focus of the SPC/SPM User's Group is to advance the technology component of Total Quality by networking within the Group and by providing an outreach within Westinghouse to foster the appropriate use of statistic techniques to achieve Total Quality. SPM encompasses the disciplines by which a process is measured against its intrinsic design capability, in the face of measurement noise and other obscuring variability. SPM tools facilitate decisions about the process that generated the data. SPM deals typically with manufacturing processes, but with some flexibility of definition and technique it accommodates many administrative processes as well. The techniques of SPM are those of Statistical Process Control, Statistical Quality Control, Measurement Control, and Experimental Design. In addition, techniques such as job and task analysis, and concurrent engineering are important elements of systematic planning and analysis that are needed early in the design process to ensure success. The SPC/SPM User's Group is endeavoring to achieve its objectives by sharing successes that have occurred within the member's own Westinghouse department as well as within other US and foreign industry. In addition, failures are reviewed to establish lessons learned in order to improve future applications. In broader terms, the Group is interested in making SPM the accepted way of doing business within Westinghouse.

Process Consultancy. The Demand for Consultancy on Group Processes in the Open University--Implications of Change (Report No. 59). Process Consultancy within the Open University 1981-1991 (Report No. 61).

ERIC Educational Resources Information Center

Nicodemus, Robert

The two reports combined here provide introductory information on consultancy work at Great Britain's Open University Institution of Educational Technology. The approach at the institution was influenced by the theories and methods developed at the Tavistock Institute of Human Relations and applied to group relations training. It is noted that the…

Impact E-Learning Platform Moodle on the Physic's Learning Process in the High School's Students

NASA Astrophysics Data System (ADS)

Torres-Montealban, Jonas; Ruiz-Chavarria, Gregorio; Gomez-Lozoya, Enrique Armando

2011-03-01

As a didactic proposal, moodle e-learning platform was implemented in one of two Physics High School's group at UACH, in order to show how the use of new technologies can improve the learning progress linked to physics concepts. As a result, the first group worked at the same time with inside class activities as well as outside resources from the moodle e-platform. The second group only worked with inside class activities. This teaching application was developed in six sections. Section I defines the educational framework. Section II identifies the key physic's concepts to be studied in each proposed activity. Section III describes the didactic model. Section IV displays the compared results between similarities and differences in both groups. Section VI shows the gathered information in order to be discussed as a topic related on how new technologies improve the Physic's learning process in the high school' students.

A virtual team group process.

PubMed

Bell, Marnie; Robertson, Della; Weeks, Marlene; Yu, Deborah

2002-01-01

Virtual teams are a phenomenon of the Information Era and their existence in health care is anticipated to increase with technology enhancements such as telehealth and groupware. The mobilization and support of high performing virtual teams are important for leading knowledge-based health professionals in the 21st century. Using an adapted McGrath group development model, the four staged maturation process of a virtual team consisting of four masters students is explored in this paper. The team's development is analyzed addressing the interaction of technology with social and task dynamics. Throughout the project, leadership competencies of value to the group that emerged were demonstrated and incorporated into the development of a leadership competency assessment instrument. The demonstration of these competencies illustrated how they were valued and internalized by the group. In learning about the work of this virtual team, the reader will gain understanding of how leadership impacts virtual team performance.

[Effect of fluoride concentration on the corrosion behavior of cobalt-chromium alloy fabricated by two different technology processes].

PubMed

Qiuxia, Yang; Ying, Yang; Han, Xu; Di, Wu; Ke, Guo

2016-02-01

This study aims to determine the effect of fluoride concentration on the corrosion behavior of cobalt-chromium alloy fabricated by two different technology processes in a simulated oral environment. A total of 15 specimens were employed with selective laser melting (SLM) and another 15 for traditional casting (Cast) in cobalt-chromium alloy powders and blocks with the same material composition. The corrosion behavior of the specimens was studied by potentiodynamic polarization test under different oral environments with varying solubilities of fluorine (0, 0.05%, and 0.20% for each) in acid artificial saliva (pH = 5.0). The specimens were soaked in fluorine for 24 h, and the surface microstructure was observed under a field emission scanning electron microscope after immersing the specimens in the test solution at constant temperature. The corrosion potential (Ecorr) value of the cobalt-chromium alloy cast decreased with increasing fluoride concentration in acidic artificial saliva. The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes changed significantly when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, Icorr, and Rp values of the cobalt-chromium alloy fabricated by two different technology processes exhibited a statistically significant difference. The Icorr value of the cobalt-chromium alloy cast was higher than that in the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P < 0.05). The Ecorr, tRp alues of the cobalt-chromium alloy cast were lower htan those of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20% (P< 0 .05). Fluoride ions adversely affected the corrosion resistance of the cobalt-chromium alloy fabricated by two different technology processes. The corrosion resistance of the cobalt-chromium alloy cast was worse than that of the SLM group cobalt-chromium alloy when the fluoride concentration was 0.20%.

Integration of e-learning technologies in an interprofessional health science course.

PubMed

Carbonaro, Mike; King, Sharla; Taylor, Elizabeth; Satzinger, Franziska; Snart, Fern; Drummond, Jane

2008-02-01

Advances in information and communication technology are influencing instructional formats and delivery modes for post secondary teaching and learning. The purpose of this study was to determine whether interprofessional team process skills traditionally taught in a small group face-to-face classroom setting could be taught in a blended learning environment; without compromising the pedagogical approach and collaborative Group Investigation Model (Sharan & Sharan 1992) used in the course. A required interprofessional team development course designed to teach health science students (Medicine, Nursing, Pharmacy, Occupational Therapy, Physical Therapy, Dentistry, Dental Hygiene, Medical Laboratory Science, and Nutrition) team process skills was redesigned from a 100% face-to-face delivery format to a blended learning format where 70% of the instruction was delivered using a new synchronous virtual classroom technology (Elluminate www.elluminate.com) in conjunction with asynchronous technology (WebCT). It was hypothesized there would be no significant difference between the blended learning format and the traditional face-to-face format in the development of interprofessional team knowledge, skills and attitudes. The two formats were evaluated on demographic information, computer experience, and interprofessional team attitudes, knowledge and skills. The three main findings are: (a) no significant differences between student groups on achieving team process skills, (b) an observation of differences between the groups on team dynamics, and (c) a more positive achievement of course learning objectives perceived by students in the blended learning class. The results provide evidence to support our blended learning format without compromising pedagogy. They also suggest that this format enhances students' perceptions of their learning.

Systems Factorial Technology provides new insights on global-local information processing in autism spectrum disorders.

PubMed

Johnson, Shannon A; Blaha, Leslie M; Houpt, Joseph W; Townsend, James T

2010-02-01

Previous studies of global-local processing in autism spectrum disorders (ASDs) have indicated mixed findings, with some evidence of a local processing bias, or preference for detail-level information, and other results suggesting typical global advantage, or preference for the whole or gestalt. Findings resulting from this paradigm have been used to argue for or against a detail focused processing bias in ASDs, and thus have important theoretical implications. We applied Systems Factorial Technology, and the associated Double Factorial Paradigm (both defined in the text), to examine information processing characteristics during a divided attention global-local task in high-functioning individuals with an ASD and typically developing controls. Group data revealed global advantage for both groups, contrary to some current theories of ASDs. Information processing models applied to each participant revealed that task performance, although showing no differences at the group level, was supported by different cognitive mechanisms in ASD participants compared to controls. All control participants demonstrated inhibitory parallel processing and the majority demonstrated a minimum-time stopping rule. In contrast, ASD participants showed exhaustive parallel processing with mild facilitatory interactions between global and local information. Thus our results indicate fundamental differences in the stopping rules and channel dependencies in individuals with an ASD.

Head of the Class: How Teachers Learn Technology Best.

ERIC Educational Resources Information Center

McKenzie, Jamie

2001-01-01

Educational technology is not about spread sheeting, word processing, or slick, "PowerPointless" student performances. Professional development should focus on curriculum-based teaching and learning strategies that enhance daily practice. Like gardening, fertilizer is needed via informal support systems, study groups, mentors, help…

Interim report deliverable 3.2 : focus group management process of the restricted use technology study

DOT National Transportation Integrated Search

2005-09-30

The Altarum Institute, under contract to the Michigan Department of Transportation (MDOT), currently is engaged in a project called the Altarum Restricted Use Technology Study. This study, an 18-month effort, seeks to apply restricted use techn...

Prospects for Policy Advances in Science and Technology in the Gulf Arab States: "The Role for International Partnerships"

ERIC Educational Resources Information Center

Hajjar, David P.; Moran, George W.; Siddiqi, Afreen; Richardson, Joshua E.; Anadon, Laura D.; Narayanamurti, Venkatesh

2014-01-01

Science, technology, engineering and mathematics (STEM) policies in the Gulf Arab States are as diverse as the individual economies and political processes that characterize its member states. During the past decade, a number of expert review groups have argued that science and technology policy needs to be reformed and revitalized in the Gulf…

An Investigation into the Secondary Schools In-Service Teachers' Selected Variables on Interactive Computer Technology (ICT) Competency

ERIC Educational Resources Information Center

Adodo, S. O.

2012-01-01

The use of computer technologies has come to stay, an individual, group of individual and society who is yet to recognize this fact is merely living. The introduction of Information and Communication Technology (ICT) into the education industry has caused transformation in instructional process. The study investigated the in-service teachers…

Exploring information technology adoption by family physicians: survey instrument valuation.

PubMed Central

Dixon, D. R.; Stewart, M.

2000-01-01

As the information needs of family physicians become more complex, there will be a greater need to successfully implement the technologies needed to manage that information. The ability to stratify primary care physicians can enable the implementation process to be more efficient. This research tested a new instrument on 101 family physicians, and was able to stratify physicians into high, intermediate, and low information technology (IT) usage groups. It is expected that this stratification would allow managers of IT implementation to target specific adoption strategies for each group. The instrument is available from ddixon@julian.uwo.ca. PMID:11079870

40 CFR 63.1332 - Emissions averaging provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... other controls for a Group 1 storage vessel, batch process vent, aggregate batch vent stream, continuous... in control after November 15, 1990. (2) Group 1 emission points, identified in paragraph (c)(3) of... applicable reference control technology or standard and the emissions allowed for the Group 1 emission point...

40 CFR 63.1332 - Emissions averaging provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... other controls for a Group 1 storage vessel, batch process vent, aggregate batch vent stream, continuous... in control after November 15, 1990. (2) Group 1 emission points, identified in paragraph (c)(3) of... reference control technology or standard and the emissions allowed for the Group 1 emission point. Said...

Application of the polystyrene model made by 3-D printing rapid prototyping technology for operation planning in revision lumbar discectomy.

PubMed

Li, Chao; Yang, Mingyuan; Xie, Yang; Chen, Ziqiang; Wang, Chuanfeng; Bai, Yushu; Zhu, Xiaodong; Li, Ming

2015-05-01

The objective was to evaluate the effectiveness of 3-D rapid prototyping technology in revision lumbar discectomy. 3-D rapid prototyping technology has not been reported in the treatment of revision lumbar discectomy. Patients with recurrent lumbar disc herniation who were preparing to undergo revision lumbar discectomy from a single center between January 2011 and 2013 were included in this analysis. Patients were divided into two groups. In group A, 3-D printing technology was used to create subject-specific lumbar vertebral models in the preoperative planning process. Group B underwent lumbar revision as usual. Preoperative and postoperative clinical outcomes were compared between groups included operation time, perioperative blood loss, postoperative complications, Oswestry Disability Index (ODI), Japan Orthopaedics Association (JOA) scores, and visual analogue scale (VAS) scores for back pain and leg pain. A total of 37 patients were included in this study (Group A = 15, Group B = 22). Group A had a significantly shorter operation time (106.53 ± 11.91 vs. 131.92 ± 10.81 min, P < 0.001) and significantly less blood loss (341.67 ± 49.45 vs. 466.77 ± 71.46 ml, P < 0.001). There was no difference between groups for complication rate. There were also no differences between groups for any clinical metric. Using the 3-D printing technology before revision lumbar discectomy may reduce the operation time and the perioperative blood loss. There does not appear to be a benefit to using the technology with respect to clinical outcomes. Future prospective studies are needed to further elucidate the efficacy of this emerging technology.

Online interprofessional learning: the student experience.

PubMed

Miers, Margaret E; Clarke, Brenda A; Pollard, Katherine C; Rickaby, Caroline E; Thomas, Judith; Turtle, Ann

2007-10-01

Health and social care students in a faculty in the United Kingdom learn together in an interprofessional module through online discussion boards. The module assessment encourages engagement with technology and with group members through peer review. An evaluation of student experience of the module gathered data from 48 students participating in 10 online groups. Analysis of contributions to discussion boards, and transcripts of interviews with 20 students revealed differing levels of participation between individuals and groups. Many students were apprehensive about the technology and there were different views about the advantages and disadvantages of online learning. Students interacted in a supportive manner. Group leadership was seen as associated with maintaining motivation to complete work on time. Students reported benefiting from the peer review process but were uncomfortable with critiquing each other's work. Sensitivity about group process may have inhibited the level of critical debate. Nevertheless the module brought together students from different professions and different sites. Examples of sharing professional knowledge demonstrated successful interprofessional collaboration online.

New technology continues to invade healthcare. What are the strategic implications/outcomes?

PubMed

Smith, Coy

2004-01-01

Healthcare technology continues to advance and be implemented in healthcare organizations. Nurse executives must strategically evaluate the effectiveness of each proposed system or device using a strategic planning process. Clinical information systems, computer-chip-based clinical monitoring devices, advanced Web-based applications with remote, wireless communication devices, clinical decision support software--all compete for capital and registered nurse salary dollars. The concept of clinical transformation is developed with new models of care delivery being supported by technology rather than driving care delivery. Senior nursing leadership's role in clinical transformation and healthcare technology implementation is developed. Proposed standards, expert group action, business and consumer groups, and legislation are reviewed as strategic drivers in the development of an electronic health record and healthcare technology. A matrix of advancing technology and strategic decision-making parameters are outlined.

An Exploration of Closure as a Factor Influencing Group Member Satisfaction: Implications for Applications of Group Support Technology in Education.

ERIC Educational Resources Information Center

Small, Ruth V.; Venkatesh, Murali

Research that identifies factors that facilitate information processing and enhance performance without reducing group confidence and decision satisfaction may influence future development of groupwork systems. This paper contains a review of the literature on cognitive and motivational issues in both group decision-making and learning contexts…

Toward a new information infrastructure in health technology assessment: communication, design, process, and results.

PubMed

Neikter, Susanna Allgurin; Rehnqvist, Nina; Rosén, Måns; Dahlgren, Helena

2009-12-01

The aim of this study was to facilitate effective internal and external communication of an international network and to explore how to support communication and work processes in health technology assessment (HTA). STRUCTURE AND METHODS: European network for Health Technology Assessment (EUnetHTA) connected sixty-four HTA Partner organizations from thirty-three countries. User needs in the different steps of the HTA process were the starting point for developing an information system. A step-wise, interdisciplinary, creative approach was used in developing practical tools. An Information Platform facilitated the exchange of scientific information between Partners and with external target groups. More than 200 virtual meetings were set up during the project using an e-meeting tool. A Clearinghouse prototype was developed with the intent to offering a single point of access to HTA relevant information. This evolved into a next step not planned from the outset: Developing a running HTA Information System including several Web-based tools to support communication and daily HTA processes. A communication strategy guided the communication effort, focusing on practical tools, creating added value, involving stakeholders, and avoiding duplication of effort. Modern technology enables a new information infrastructure for HTA. The potential of information and communication technology was used as a strategic tool. Several target groups were represented among the Partners, which supported collaboration and made it easier to identify user needs. A distinctive visual identity made it easier to gain and maintain visibility on a limited budget.

Nondestructive Evaluation Technology Working Group Report (IDA/OSD R&M (Institute for Defense Analyses/Office of the Secretary of Defense Reliability and Maintainability Study).

DTIC Science & Technology

1983-08-01

evaluating surface residual stresses in ferromagnetic materials, but until recently has - been considered too time consuming for production application. Fast...generic residual stress , X-ray, image processing, neutron processing, neutron radiography, vibrothermography, nuclear magnetic resonance 20. ABSTRACT...studied, this technology study effort would not have been possible within the time and resources available. P-3 i La

Technological Effects on Interpersonal Communication: A Classroom Activity.

ERIC Educational Resources Information Center

Vandehaar, Debb

Noting that few scholars have examined specifically how technology is affecting basic communication processes, students in interpersonal, small group, and advanced presentational forms classes studied the systems model of interpersonal communication. The systems model described by P. Emmert and W.C. Donaghy includes the following components:…

Automatic process control in anaerobic digestion technology: A critical review.

PubMed

Nguyen, Duc; Gadhamshetty, Venkataramana; Nitayavardhana, Saoharit; Khanal, Samir Kumar

2015-10-01

Anaerobic digestion (AD) is a mature technology that relies upon a synergistic effort of a diverse group of microbial communities for metabolizing diverse organic substrates. However, AD is highly sensitive to process disturbances, and thus it is advantageous to use online monitoring and process control techniques to efficiently operate AD process. A range of electrochemical, chromatographic and spectroscopic devices can be deployed for on-line monitoring and control of the AD process. While complexity of the control strategy ranges from a feedback control to advanced control systems, there are some debates on implementation of advanced instrumentations or advanced control strategies. Centralized AD plants could be the answer for the applications of progressive automatic control field. This article provides a critical overview of the available automatic control technologies that can be implemented in AD processes at different scales. Copyright © 2015 Elsevier Ltd. All rights reserved.

Applications of Space-Age Technology in Anthropology

NASA Technical Reports Server (NTRS)

1991-01-01

The papers in this volume were presented at a conference entitled, 'Applications of Space-Age Technology in Anthropology,' held November 28, 1990, at NASA's Science and Technology Laboratory. One reason for this conference was to facilitate information exchange among a diverse group of anthropologists. Much of the research in anthropology that has made use of satellite image processing, geographical information systems, and global positioning systems has been known to only a small group of practitioners. A second reason for this conference was to promote scientific dialogue between anthropologists and professionals outside of anthropology. It is certain that both the development and proper application of new technologies will only result from greater cooperation between technicians and 'end-users.' Anthropologists can provide many useful applications to justify the costs of new technological development.

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

Metals and Ceramics Division annual progress report, October 1, 1978-June 30, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, S.

Research is reported concerning: (1) engineering materials including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuels fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy and properties, radiation effects and microstructural analysis, metastable and superconducting materials, structure and properties of surfaces, theoretical research, and x-ray research and applications. Highlights of the work of the metallographic group and the current status of the High-Temperature Materials Laboratory (HTML) and the Materials and Structures Technology Management Center (MSTMC) aremore » presented. (FS)« less

Enhancing clinical teaching with information technologies: what can we do right now?

PubMed

Sandroni, S

1997-09-01

Effective small-group clinical teaching requires recognizing the challenges posed by clinical settings, mastering certain teaching skills, and responding to the needs of what is often a diverse group of learners. Information technologies can enhance clinical teaching by increasing the amount of relevant clinical information available to learners, allowing for the rapid integration of needed information into the teaching encounter, facilitating information processing within small groups, and helping to compensate for the many discontinuities inherent in today's clinical teaching environment. However, as many clinical teachers look toward future implementations of advanced, totally integrated medical information systems, they often overlook information technologies they have at hand right now--e.g., CD-ROM textbooks--that can measurably enhance their teaching. The author describes the "real-world" use of several available technologies (for example, "bookmarking" MEDLINE access points) and offers suggestions for how they might be used by faculty in clinical settings.

Cold plasma processing to improve food safety

USDA-ARS?s Scientific Manuscript database

Cold plasma is an antimicrobial process being developed for application as a food processing technology. This novel intervention is the subject of an expanding research effort by groups around the world. A variety of devices can be used to generate cold plasma and apply it to the food commodity bein...

Content validation using an expert panel: assessment process for assistive technology adopted by farmers with disabilities.

PubMed

Mathew, S N; Field, W E; French, B F

2011-07-01

This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.

How Pictorial Knowledge Representations Mediate Collaborative Knowledge Construction in Groups

ERIC Educational Resources Information Center

Naykki, Piia; Jarvela, Sanna

2008-01-01

This study investigates the process of collaborative knowledge construction when technology and pictorial knowledge representations are used for visualizing individual and groups' shared ideas. The focus of the study is on how teacher-students contribute to the group's collaborative knowledge construction and use each other's ideas and tools as an…

Seven Processes that Enable NASA Software Engineering Technologies

NASA Technical Reports Server (NTRS)

Housch, Helen; Godfrey, Sally

2011-01-01

This slide presentation reviews seven processes that NASA uses to ensure that software is developed, acquired and maintained as specified in the NPR 7150.2A requirement. The requirement is to ensure that all software be appraised for the Capability Maturity Model Integration (CMMI). The enumerated processes are: (7) Product Integration, (6) Configuration Management, (5) Verification, (4) Software Assurance, (3) Measurement and Analysis, (2) Requirements Management and (1) Planning & Monitoring. Each of these is described and the group(s) that are responsible is described.

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH).

PubMed

García-Rojo, Marcial; Gonçalves, Luís; Blobel, Bernd

2012-01-01

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH) is a European COST Action that has been running from 2007 to 2011. COST Actions are funded by the COST (European Cooperation in the field of Scientific and Technical Research) Agency, supported by the Seventh Framework Programme for Research and Technological Development (FP7), of the European Union. EURO-TELEPATH's main objectives were evaluating and validating the common technological framework and communication standards required to access, transmit and manage digital medical records by pathologists and other medical professionals in a networked environment. The project was organized in four working groups. orking Group 1 "Business modeling in pathology" has designed main pathology processes - Frozen Study, Formalin Fixed Specimen Study, Telepathology, Cytology, and Autopsy -using Business Process Modeling Notation (BPMN). orking Group 2 "Informatics standards in pathology" has been dedicated to promoting the development and application of informatics standards in pathology, collaborating with Integrating the Healthcare Enterprise (IHE), Digital Imaging and Communications in Medicine (DICOM), Health Level Seven (HL7), and other standardization bodies. Working Group 3 "Images: Analysis, Processing, Retrieval and Management" worked on the use of virtual or digital slides that are fostering the use of image processing and analysis in pathology not only for research purposes, but also in daily practice. Working Group 4 "Technology and Automation in Pathology" was focused on studying the adequacy of current existing technical solutions, including, e.g., the quality of images obtained by slide scanners, or the efficiency of image analysis applications. Major outcome of this action are the collaboration with international health informatics standardization bodies to foster the development of standards for digital pathology, offering a new approach for workflow analysis, based in business process modeling. Health terminology standardization research has become a topic of high interest. Future research work should focus on standardization of automatic image analysis and tissue microarrays imaging.

Motivating At-Risk Students through Computer-based Cooperative Learning Activities.

ERIC Educational Resources Information Center

Gan, Siowck-Lee

1999-01-01

Malaysian at-risk students trained in information-technology skills were appointed to lead cooperative-learning groups engaged in computer-search activities. Activities were structured to incorporate individual accountability, positive interdependence and interaction, collaborative skills, and group processing. Motivation, self-confidence,…

New technology for food systems and security.

PubMed

Yau, N J Newton

2009-01-01

In addition to product trade, technology trade has become one of the alternatives for globalization action around the world. Although not all technologies employed on the technology trade platform are innovative technologies, the data base of international technology trade still is a good indicator for observing innovative technologies around world. The technology trade data base from Sinew Consulting Group (SCG) Ltd. was employed as an example to lead the discussion on security or safety issues that may be caused by these innovative technologies. More technologies related to processing, functional ingredients and quality control technology of food were found in the data base of international technology trade platform. The review was conducted by categorizing technologies into the following subcategories in terms of safety and security issues: (1) agricultural materials/ingredients, (2) processing/engineering, (3) additives, (4) packaging/logistics, (5) functional ingredients, (6) miscellaneous (include detection technology). The author discusses examples listed for each subcategory, including GMO technology, nanotechnology, Chinese medicine based functional ingredients, as well as several innovative technologies. Currently, generation of innovative technology advance at a greater pace due to cross-area research and development activities. At the same time, more attention needs to be placed on the employment of these innovative technologies.

Fingerprint pattern restoration by digital image processing techniques.

PubMed

Wen, Che-Yen; Yu, Chiu-Chung

2003-09-01

Fingerprint evidence plays an important role in solving criminal problems. However, defective (lacking information needed for completeness) or contaminated (undesirable information included) fingerprint patterns make identifying and recognizing processes difficult. Unfortunately. this is the usual case. In the recognizing process (enhancement of patterns, or elimination of "false alarms" so that a fingerprint pattern can be searched in the Automated Fingerprint Identification System (AFIS)), chemical and physical techniques have been proposed to improve pattern legibility. In the identifying process, a fingerprint examiner can enhance contaminated (but not defective) fingerprint patterns under guidelines provided by the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group on Imaging Technology (SWGIT), and an AFIS working group within the National Institute of Justice. Recently, the image processing techniques have been successfully applied in forensic science. For example, we have applied image enhancement methods to improve the legibility of digital images such as fingerprints and vehicle plate numbers. In this paper, we propose a novel digital image restoration technique based on the AM (amplitude modulation)-FM (frequency modulation) reaction-diffusion method to restore defective or contaminated fingerprint patterns. This method shows its potential application to fingerprint pattern enhancement in the recognizing process (but not for the identifying process). Synthetic and real images are used to show the capability of the proposed method. The results of enhancing fingerprint patterns by the manual process and our method are evaluated and compared.

Use of technology with health care providers: perspectives from urban youth.

PubMed

Lindstrom Johnson, Sarah; Tandon, S Darius; Trent, Maria; Jones, Vanya; Cheng, Tina L

2012-06-01

To evaluate urban youths' use of and access to technology and solicit their opinions about using technology with healthcare providers. Urban youth (aged 14-24 years) were invited to participate in focus groups in which a trained focus group facilitator used a survey and a structured guide to elicit responses regarding the foregoing objective. All sessions were audiotaped and transcribed. Emergent themes were determined with the assistance of Atlas TI. Survey data were analyzed in SPSS (SPSS Inc, Chicago, Illinois). Eight focus groups including 82 primarily low-income urban African-American adolescents and young adults (mean age, 18.5 years) were completed. The participants reported fairly high access to and use of technology. However, they expressed some concerns regarding the use of technology with healthcare providers. Many worried about the confidentiality of conversations conducted using technology. Face-to-face meetings with a healthcare provider were preferred by most participants, who felt that the information provided would be better tailored to their individual needs and more credible. Although urban youth were high users of technology, they expressed reservations about using technology with health care providers. When developing new technology communication and information dissemination strategies, it is critical to understand and address these concerns while involving young people in the research and development process. Copyright © 2012 Mosby, Inc. All rights reserved.

High efficiency solar cell processing

NASA Technical Reports Server (NTRS)

Ho, F.; Iles, P. A.

1985-01-01

At the time of writing, cells made by several groups are approaching 19% efficiency. General aspects of the processing required for such cells are discussed. Most processing used for high efficiency cells is derived from space-cell or concentrator cell technology, and recent advances have been obtained from improved techniques rather than from better understanding of the limiting mechanisms. Theory and modeling are fairly well developed, and adequate to guide further asymptotic increases in performance of near conventional cells. There are several competitive cell designs with promise of higher performance ( 20%) but for these designs further improvements are required. The available cell processing technology to fabricate high efficiency cells is examined.

Educational Technology Classics: Educational Technology Doesn't Really Exist

ERIC Educational Resources Information Center

Silvern, Leonard C.

2013-01-01

The improvement of a professional group is due, in part, to its ability for introspection and self-evaluation. This is essentially the process of "analyzing" the profession as it currently is practiced, identifying necessary changes and improvements, and "synthesizing" or creating a new image or model of the profession to…

Exploring resistance to implementation of welfare technology in municipal healthcare services - a longitudinal case study.

PubMed

Nilsen, Etty R; Dugstad, Janne; Eide, Hilde; Gullslett, Monika Knudsen; Eide, Tom

2016-11-15

Industrialized and welfare societies are faced with vast challenges in the field of healthcare in the years to come. New technological opportunities and implementation of welfare technology through co-creation are considered part of the solution to this challenge. Resistance to new technology and resistance to change is, however, assumed to rise from employees, care receivers and next of kin. The purpose of this article is to identify and describe forms of resistance that emerged in five municipalities during a technology implementation project as part of the care for older people. This is a longitudinal, single-embedded case study with elements of action research, following an implementation of welfare technology in the municipal healthcare services. Participants included staff from the municipalities, a network of technology developers and a group of researchers. Data from interviews, focus groups and participatory observation were analysed. Resistance to co-creation and implementation was found in all groups of stakeholders, mirroring the complexity of the municipal context. Four main forms of resistance were identified: 1) organizational resistance, 2) cultural resistance, 3) technological resistance and 4) ethical resistance, each including several subforms. The resistance emerges from a variety of perceived threats, partly parallel to, partly across the four main forms of resistance, such as a) threats to stability and predictability (fear of change), b) threats to role and group identity (fear of losing power or control) and c) threats to basic healthcare values (fear of losing moral or professional integrity). The study refines the categorization of resistance to the implementation of welfare technology in healthcare settings. It identifies resistance categories, how resistance changes over time and suggests that resistance may play a productive role when the implementation is organized as a co-creation process. This indicates that the importance of organizational translation between professional cultures should not be underestimated, and supports research indicating that focus on co-initiation in the initial phase of implementation projects may help prevent different forms of resistance in complex co-creation processes.

40 CFR 63.7522 - Can I use emissions averaging to comply with this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... monitored for each averaging group; (iii) The specific control technology or pollution prevention measure to... section. You may not include new boilers or process heaters in an emissions average. (b) For a group of... heater in the averaging group, the emission rate achieved during the initial compliance test for the HAP...

40 CFR 63.7522 - Can I use emissions averaging to comply with this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... monitored for each averaging group; (iii) The specific control technology or pollution prevention measure to... section. You may not include new boilers or process heaters in an emissions average. (b) For a group of... heater in the averaging group, the emission rate achieved during the initial compliance test for the HAP...

Research, Development and Demonstration (RD&D) Needs for Light Water Reactor (LWR) Technologies A Report to the Reactor Technology Subcommittee of the Nuclear Energy Advisory Committee (NEAC) Office of Nuclear Energy U.S. Department of Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCarthy, Kathryn A.; Adams, Bradley J.

The LWR RD&D Working Group developed a detailed list of RD&D suggestions and recommendations, which are provided in Appendix D. The Working Group then undertook a systematic ranking process, described in Appendix E. The results of the ranking process are not meant to be a strict set of priorities, but rather should provide insight into how the items generally ranked within the Working Group. Future discussions and investigation into these items could provide information that would support a change in these priorities or in their emphasis. The results of this prioritization are provided below. Note that in general, many RD&Dmore » ideas are applicable to both new Advanced Light Water Reactor (ALWR) plants and currently operating plants.« less

PD-atricians: Leveraging Physicians and Participatory Design to Develop Novel Clinical Information Tools

PubMed Central

Pollack, Ari H; Miller, Andrew; Mishra, Sonali R.; Pratt, Wanda

2016-01-01

Participatory design, a method by which system users and stakeholders meaningfully contribute to the development of a new process or technology, has great potential to revolutionize healthcare technology, yet has seen limited adoption. We conducted a design session with eleven physicians working to create a novel clinical information tool utilizing participatory design methods. During the two-hour session, the physicians quickly engaged in the process and generated a large quantity of information, informing the design of a future tool. By utilizing facilitators experienced in design methodology, with detailed domain expertise, and well integrated into the healthcare organization, the participatory design session engaged a group of users who are often disenfranchised with existing processes as well as health information technology in general. We provide insight into why participatory design works with clinicians and provide guiding principles for how to implement these methods in healthcare organizations interested in advancing health information technology. PMID:28269900

[The virtual environment of a research group: the tutors' perspective].

PubMed

Prado, Cláudia; Casteli, Christiane Pereira Martins; Lopes, Tania Oliveira; Kobayashi, Rika M; Peres, Heloísa Helena Ciqueto; Leite, Maria Madalena Januário

2012-02-01

The Grupo de Estudos e Pesquisas de Tecnologia da Informação nos Processos de Trabalho em Enfermagem (Study and Research Group for Information Technology in the Nursing Working Processes, GEPETE) has the purpose of producing and socializing knowledge in information technology and health and nursing communication, making associations with research groups in this field and promoting student participation. This study was performed by the group tutors with the objective to report on the development of the virtual learning environment (VLE) and the tutors' experience as mediators of a research group using the Moodle platform. To do this, a VLE was developed and pedagogical mediation was performed following the theme of mentoring. An initial diagnosis was made of the difficulties in using this technology in interaction and communication, which permitted the proposal of continuing to use the platform as a resource to support research activities, offer lead researchers the mechanisms to socialize projects and offer the possibility of giving advice at a distance.

Beyond Coordination: Joint Planning and Program Execution. The IHPRPT Materials Working Group

NASA Technical Reports Server (NTRS)

Stropki, Michael A.; Cleyrat, Danial A.; Clinton, Raymond G., Jr.; Rogacki, John R. (Technical Monitor)

2000-01-01

"Partnership is more than just coordination," stated then-Commander of the Air Force Research Laboratory (AFRL), Major General Dick Paul (USAF-Ret), at this year's National Space and Missile Materials Symposium. His comment referred to the example of the joint planning and program execution provided by the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Materials Working Group (IMWG). Most people agree that fiscal pressures imposed by shrinking budgets have made it extremely difficult to build upon our existing technical capabilities. In times of sufficient budgets, building advanced systems poses no major difficulties. However, with today's budgets, realizing enhanced capabilities and developing advanced systems often comes at an unaffordable cost. Overcoming this problem represents both a challenge and an opportunity to develop new business practices that allow us to develop advanced technologies within the restrictions imposed by current funding levels. Coordination of technology developments between different government agencies and organizations is a valuable tool for technology transfer. However, rarely do the newly developed technologies have direct applicability to other ongoing programs. Technology requirements are typically determined up-front during the program planning stage so that schedule risk can be minimized. The problem with this process is that the costs associated with the technology development are often borne by a single program. Additionally, the potential exists for duplication of technical effort. Changing this paradigm is a difficult process but one that can be extremely worthwhile should the right opportunity arise. The IMWG is one such example where NASA, the DoD, and industry have developed joint requirements that are intended to satisfy multiple program needs. More than mere coordination, the organizations comprising the group come together as partners, sharing information and resources, proceeding from a joint roadmap.

Process Analytical Technology (PAT): batch-to-batch reproducibility of fermentation processes by robust process operational design and control.

PubMed

Gnoth, S; Jenzsch, M; Simutis, R; Lübbert, A

2007-10-31

The Process Analytical Technology (PAT) initiative of the FDA is a reaction on the increasing discrepancy between current possibilities in process supervision and control of pharmaceutical production processes and its current application in industrial manufacturing processes. With rigid approval practices based on standard operational procedures, adaptations of production reactors towards the state of the art were more or less inhibited for long years. Now PAT paves the way for continuous process and product improvements through improved process supervision based on knowledge-based data analysis, "Quality-by-Design"-concepts, and, finally, through feedback control. Examples of up-to-date implementations of this concept are presented. They are taken from one key group of processes in recombinant pharmaceutical protein manufacturing, the cultivations of genetically modified Escherichia coli bacteria.

GOCI Level-2 Processing Improvements and Cloud Motion Analysis

NASA Technical Reports Server (NTRS)

Robinson, Wayne D.

2015-01-01

The Ocean Biology Processing Group has been working with the Korean Institute of Ocean Science and Technology (KIOST) to process geosynchronous ocean color data from the GOCI (Geostationary Ocean Color Instrument) aboard the COMS (Communications, Ocean and Meteorological Satellite). The level-2 processing program, l2gen has GOCI processing as an option. Improvements made to that processing are discussed here as well as a discussion about cloud motion effects.

Extrusion Processing of Raw Food Materials and by-products: A Review.

PubMed

Offiah, Vivian; Kontogiorgos, Vassilis; Falade, Kolawole O

2018-05-22

Extrusion technology has rapidly transformed the food industry with its numerous advantages over other processing methods. It offers a platform for processing different products from various food groups by modifying minor or major ingredients and processing conditions. Although cereals occupy a large portion of the extruded foods market, several other types of raw materials have been used. Extrusion processing of various food groups, including cereals and pseudo cereals, roots and tubers, pulses and oilseeds, fruits and vegetables, and animal products, as well as structural and nutritional changes in these food matrices are reviewed. Value addition by extrusion to food processing wastes and by-products from fruits and vegetables, dairy, meat and seafood, cereals and residues from starch, syrup and alcohol production, and oilseed processing are also discussed. Extrusion presents an economical technology for incorporating food processing residues and by-products back into the food stream. In contemporary scenarios, rising demand for extruded products with functional ingredients, attributed to evolving lifestyles and preferences, have led to innovations in the form, texture, color and content of extruded products. Information presented in this review would be of importance to processors and researchers as they seek to enhance nutritional quality and delivery of extruded products.

Legitimation problems of participatory processes in technology assessment and technology policy.

PubMed

Saretzki, Thomas

2012-11-01

Since James Carroll (1971) made a strong case for "participatory technology", scientists, engineers, policy-makers and the public at large have seen quite a number of different approaches to design and implement participatory processes in technology assessment and technology policy. As these participatory experiments and practices spread over the last two decades, one could easily get the impression that participation turned from a theoretical normative claim to a working practice that goes without saying. Looking beyond the well-known forerunners and considering the ambivalent experiences that have been made under different conditions in various places, however, the "if" and "how" of participation are still contested issues when questions of technology are on the agenda. Legitimation problems indicate that attempts to justify participation in a given case have not been entirely successful in the eyes of relevant groups among the sponsors, participants, organizers or observers. Legitimation problems of participatory processes in technology assessment and technology policy vary considerably, and they do so not only with the two domains and the ways of their interrelation or the specific features of the participatory processes. If we ask whether or not participation is seen as problematic in technology assessment and technology policy-making and in what sense it is being evaluated as problematic, then we find that the answer depends also on the approaches and criteria that have been used to legitimize or delegitimize the call for a specific design of participation.

78 FR 20625 - Spent Nuclear Fuel Management at the Savannah River Site

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... processing is a chemical separations process that involves dissolving spent fuel in nitric acid and... Engineering Laboratory Environmental Restoration and Waste Management Programs Final Environmental Impact... chemical properties, and radionuclide inventory. The fuel groups and the seven technologies that could be...

Report To The Secretary Of Defense-Task Group On A Culture Of Savings: Implementing Behavior Change In DoD

DTIC Science & Technology

2011-01-01

Shared Services in the Public Sector - Accenture Shared Services in Government - AT Kearney – 2009 Global Shared Services Survey Results - Deloitte... Shared Services - a Benchmark Study - The Johnson Group – Economics of Business Process Outsourcing - Technology Association of Georgia – State of... Shared Services and Business Process Outsourcing - Accenture – Public Sector Outsourcing Surge in 2010 - National Outsourcing Association – Naval

The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

PubMed

Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

2016-05-01

Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

JPRS Report, Soviet Union. World Economy & International Relations, No. 12, December 1988.

DTIC Science & Technology

1989-04-18

conditions of scientific and technological progress is considered to be the main factor influencing such process. Leading companies are trying to...departments, groups etc. Project teams are widely used when a new kind of product is developed or when R and D or technological problems are to be...medium-sized partners are integrated into a single scientific and technological entity by big companies. Cooperation in production is also important

Report of the In Situ Resources Utilization Workshop

NASA Technical Reports Server (NTRS)

Fairchild, Kyle (Editor); Mendell, Wendell W. (Editor)

1988-01-01

The results of a workshop of 50 representatives from the public and private sector which investigated the potential joint development of the key technologies and mechanisms that will enable the permanent habitation of space are presented. The workshop is an initial step to develop a joint public/private assessment of new technology requirements of future space options, to share knowledge on required technologies that may exist in the private sector, and to investigate potential joint technology development opportunities. The majority of the material was produced in 5 working groups: (1) Construction, Assembly, Automation and Robotics; (2) Prospecting, Mining, and Surface Transportation; (3) Biosystems and Life Support; (4) Materials Processing; and (5) Innovative Ventures. In addition to the results of the working groups, preliminary technology development recommendations to assist in near-term development priority decisions are presented. Finally, steps are outlined for potential new future activities and relationships among the public, private, and academic sectors.

Dynamics of Change in Research Work: Constructing a New Research Area in a Research Group.

ERIC Educational Resources Information Center

Saari, Eveliina; Miettinen, Reijo

2001-01-01

Studies how an aerosol technology research group constructed a research agenda for itself and how its activity was changed in the process. Analyzes the development of the production of ultrafine particles and employs the concept of mediated activity. (Contains 29 references.) (DDR)

Virtual Team Communication and Collaboration in Army and Corporate Applications

DTIC Science & Technology

2009-06-12

Sharmila Pixy Ferri , 49-75. Hershey, PA: Idea Group Inc. Brown, Frederic J. 2006. Building high-performing commander leader teams: Intensive collaboration...Process, Technologies and Practice eds. Susan Hayes Godar and Sharmila Pixy Ferri , 49- 75. Hershey, Pennsylvania: Idea Group Inc. DeMarie, Samuel M. 2000

75 FR 55593 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

... Behavioral Processes Integrated Review Group; Motor Function, Speech and Rehabilitation Study Section. Date... and Imaging Technologies Study Section. Date: October 7-8, 2010. Time: 8:30 a.m. to 5 p.m. Agenda: To... Review Group; Drug Discovery and Mechanisms of Antimicrobial Resistance Study Section. Date: October 14...

Open Source Radiation Hardened by Design Technology

NASA Technical Reports Server (NTRS)

Shuler, Robert

2016-01-01

The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

Development of an Applied Framework for Understanding Health Information Technology in Nursing Homes.

PubMed

Degenholtz, Howard B; Resnick, Abby; Lin, Michael; Handler, Steven

2016-05-01

There is growing evidence that Health Information Technology (HIT) can play a role in improving quality of care and increasing efficiency in the nursing home setting. Most research in this area, however, has examined whether nursing homes have or use any of a list of available technologies. We sought to develop an empirical framework for understanding the intersection between specific uses of HIT and clinical care processes. Using the nominal group technique, we conducted a series of focus groups with different types of personnel who work in nursing homes (administrators, directors of nursing, physicians, mid-level practitioners, consultant pharmacists, and aides). The resulting framework identified key domain areas that can benefit from HIT: transfer of data, regulatory compliance, quality improvement, structured clinical documentation, medication use process, and communication. The framework can be used to guide both descriptive and normative research. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Research and Development of External Occultor Technology for the Direct Observation of Extrasolar Planetary Systems : JPL Starshades Project

NASA Technical Reports Server (NTRS)

Franz, Herbert; Stadeler, Mehnert

2012-01-01

Our group conducted work during the Summer of 2012 assembling and developing JPL's Starshades Project under the Technology Development for Exoplanet Missions(TDEM) initiative created by NASA, specifically TDEM stage 2. The goal of the work conducted at JPL by our group was to construct four occultor petals, the main optical components of the Starshade, for the analysis of joint deployment characteristics and of mechanical strain. A Starshade is an optical structure measuring approximately 30 meters in diameter that uses the effects of light diffraction off sheer edges, light scattering, and negative interference between waves to negate all on-axis light in a telescope's image, providing very high contrast that allows planets orbiting a target star to be observed. We completed our engineering goals in the time span of 10 weeks, during which the assembly processes of manufacture, alignment, and structural bonding took place. The Starshade technology and construction process is further discussed in the body of this paper.

Public perceptions of the risks of an unfamiliar technology: The case of using nuclear energy sources for space missions

NASA Astrophysics Data System (ADS)

Maharik, Michael

This thesis addresses the public perception of the risk of a technology not widely known to laypeople. Its aims were (1) to characterize public perceptions of the risk of using nuclear energy in space and decisions related to this risk, and (2) to extend the 'mental model' methodology to studying public perception of unfamiliar, risky technologies. A model of the physical processes capable of creating risks from using nuclear energy sources in space was first constructed. Then, knowledge and beliefs related to this topic were elicited from three different groups of people. The generality of the findings was examined in a constructive replication with environmentally-oriented people. The possibility of involving the public in decision-making processes related to engineering macro-design was then investigated. Finally, a communication regarding these risk processes was developed and evaluated in an experiment comparing it with communications produced by NASA. Although they included large portions of the expert model, people's beliefs also had gaps and misconceptions. Respondents often used scientific terms without a clear understanding of what they meant. Respondents' mental models sometimes contained scattered and inconsistent entries. The impact of pre-existing mental models was clearly seen. Different groups of people had different patterns of knowledge and beliefs. Nevertheless, respondents expressed reasonable and coherent opinions on choices among engineering options. The CMU brochure, derived from the study of readers' existing mental models, provided a better risk communication tool than NASA's material, reflecting primarily experts' perspective. The better performance of subjects reading either brochure generally reflected adding knowledge on issues that they had not previously known, rather than correcting wrong beliefs. The communication study confirmed a hypothesis that improving knowledge on risk processes related to the use of a technology causes a more favorable attitude towards that technology. Recommendations related to the design and targeting of risk communication, and to public participation in decision-making on using new and risky technologies, are derived. Additional studies that will elicit laypeople's definitions of risk related to specific technologies, and link their detailed understanding of risk-development processes to the perceived dimensions of risk, are suggested.

[Classification and organization technologies in public health].

PubMed

Filatov, V B; Zhiliaeva, E P; Kal'fa, Iu I

2000-01-01

The authors discuss the impact and main characteristics of organization technologies in public health and the processes of their development and evaluation. They offer an original definition of the notion "organization technologies" with approaches to their classification. A system of logical bases is offered, which can be used for classification. These bases include the level of organization maturity and stage of development of organization technology, its destination to a certain level of management, type of influence and concentration of trend, mechanism of effect, functional group, and methods of development.

Sensors for process control Focus Team report

NASA Astrophysics Data System (ADS)

At the Semiconductor Technology Workshop, held in November 1992, the Semiconductor Industry Association (SIA) convened 179 semiconductor technology experts to assess the 15-year outlook for the semiconductor manufacturing industry. The output of the Workshop, a document entitled 'Semiconductor Technology: Workshop Working Group Reports,' contained an overall roadmap for the technology characteristics envisioned in integrated circuits (IC's) for the period 1992-2007. In addition, the document contained individual roadmaps for numerous key areas in IC manufacturing, such as film deposition, thermal processing, manufacturing systems, exposure technology, etc. The SIA Report did not contain a separate roadmap for contamination free manufacturing (CFM). A key component of CFM for the next 15 years is the use of sensors for (1) defect reduction, (2) improved product quality, (3) improved yield, (4) improved tool utilization through contamination reduction, and (5) real time process control in semiconductor fabrication. The objective of this Focus Team is to generate a Sensors for Process Control Roadmap. Implicit in this objective is the identification of gaps in current sensor technology so that research and development activity in the sensor industry can be stimulated to develop sensor systems capable of meeting the projected roadmap needs. Sensor performance features of interest include detection limit, specificity, sensitivity, ease of installation and maintenance, range, response time, accuracy, precision, ease and frequency of calibration, degree of automation, and adaptability to in-line process control applications.

The process group approach to reliable distributed computing

NASA Technical Reports Server (NTRS)

Birman, Kenneth P.

1992-01-01

The difficulty of developing reliable distribution software is an impediment to applying distributed computing technology in many settings. Experience with the ISIS system suggests that a structured approach based on virtually synchronous process groups yields systems that are substantially easier to develop, exploit sophisticated forms of cooperative computation, and achieve high reliability. Six years of research on ISIS, describing the model, its implementation challenges, and the types of applications to which ISIS has been applied are reviewed.

[The study of functional status in the perception of visual information depending on the method of technical color mixing on LCD and DLP projectors technology].

PubMed

Merkulova, A G; Osokina, E S; Bukhtiiarov, I V

2014-10-01

The case of compare two ways of projection color visual images, characterized by different spatial-temporal characteristics of visual stimuli, presents the methodology and the set of techniques. Received comparative data, identifying risks of regulation disorder of the functional state and development general, mental and visual fatigue during prolonged strenuous visual activity, according to two types of test tasks, which are the most typical for the use of modern projectors to work with the audience, both inthe process of implementation of learning technologies and the collective take responsible decisions by expert groups that control of complex technological processes.

Visual Information Processing for Television and Telerobotics

NASA Technical Reports Server (NTRS)

Huck, Friedrich O. (Editor); Park, Stephen K. (Editor)

1989-01-01

This publication is a compilation of the papers presented at the NASA conference on Visual Information Processing for Television and Telerobotics. The conference was held at the Williamsburg Hilton, Williamsburg, Virginia on May 10 to 12, 1989. The conference was sponsored jointly by NASA Offices of Aeronautics and Space Technology (OAST) and Space Science and Applications (OSSA) and the NASA Langley Research Center. The presentations were grouped into three sessions: Image Gathering, Coding, and Advanced Concepts; Systems; and Technologies. The program was organized to provide a forum in which researchers from industry, universities, and government could be brought together to discuss the state of knowledge in image gathering, coding, and processing methods.

Electrochemical carbon dioxide concentrator advanced technology tasks

NASA Technical Reports Server (NTRS)

Schneider, J. J.; Schubert, F. H.; Hallick, T. M.; Woods, R. R.

1975-01-01

Technology advancement studies are reported on the basic electrochemical CO2 removal process to provide a basis for the design of the next generation cell, module and subsystem hardware. An Advanced Electrochemical Depolarized Concentrator Module (AEDCM) is developed that has the characteristics of low weight, low volume, high CO2, removal, good electrical performance and low process air pressure drop. Component weight and noise reduction for the hardware of a six man capacity CO2 collection subsystem was developed for the air revitalization group of the Space Station Prototype (SSP).

Introduction and uptake of new medical technologies in the Australian health care system: a qualitative study.

PubMed

Gallego, Gisselle; Casey, Robert; Norman, Richard; Goodall, Stephen

2011-10-01

The aim of this study was to explore the views and perceptions of stakeholders about the current national health technology assessment process conducted by the Medical Services Advisory Committee (MSAC) and its role in the uptake and diffusion of new medical technologies in Australia. Data collection occurred over a nine month period (August 2008-April 2009). Twenty in-depth, semi-structured interviews were conducted with individuals from four stakeholders groups: (i) MSAC members and evaluators, (ii) academic and health technology assessment experts, (iii) medical industry representatives and (iv) medical specialists. Interviews were digitally recorded, transcribed verbatim and coded using a constant comparative method. Respondents expressed a consensus opinion that the MSAC process is generally fair and transparent, and has been increasingly so over time. The process was described as "flexible" and "intuitive" yet also "idiosyncratic" due to the nature of the technologies being appraised. Approval by MSAC was generally reported to be increasingly important once a technology becomes more widely used. While successful MSAC approval was felt to be important for widespread distribution of a new technology, it was viewed more as a "facilitator of the uptake of new technologies" as opposed to a primary "driver" of technology uptake. Instead, other factors were identified as providing the actual impetus for the uptake of new technologies, with MSAC approval and reimbursement eventually helping facilitate more widespread diffusion. MSAC's decision making process is perceived as fair but with room for improvement. Its role in the uptake and diffusion of new medical technologies in Australia is limited. MSAC does not act as a barrier to significant market penetration of new procedures and medical technologies. However reimbursement is a trigger for increased use. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Virtual care policy recommendations for patient-centred primary care: findings of a consensus policy dialogue using a nominal group technique.

PubMed

Shaw, James; Jamieson, Trevor; Agarwal, Payal; Griffin, Bailey; Wong, Ivy; Bhatia, R Sacha

2017-01-01

Background The development of new virtual care technologies (including telehealth and telemedicine) is growing rapidly, leading to a number of challenges related to health policy and planning for health systems around the world. Methods We brought together a diverse group of health system stakeholders, including patient representatives, to engage in policy dialogue to set health system priorities for the application of virtual care in the primary care sector in the Province of Ontario, Canada. We applied a nominal group technique (NGT) process to determine key priorities, and synthesized these priorities with group discussion to develop recommendations for virtual care policy. Methods included a structured priority ranking process, open-ended note-taking, and thematic analysis to identify priorities. Results Recommendations were summarized under the following themes: (a) identify clear health system leadership to embed virtual care strategies into all aspects of primary and community care; (b) make patients the focal point of health system decision-making; (c) leverage incentives to achieve meaningful health system improvements; and (d) building virtual care into streamlined workflows. Two key implications of our policy dialogue are especially relevant for an international audience. First, shifting the dialogue away from technology toward more meaningful patient engagement will enable policy planning for applications of technology that better meet patients' needs. Second, a strong conceptual framework on guiding the meaningful use of technology in health care settings is essential for intelligent planning of virtual care policy. Conclusions Policy planning for virtual care needs to shift toward a stronger focus on patient engagement to understand patients' needs.

Variable Discretisation for Anomaly Detection using Bayesian Networks

DTIC Science & Technology

2017-01-01

UNCLASSIFIED DST- Group –TR–3328 1 Introduction Bayesian network implementations usually require each variable to take on a finite number of mutually...UNCLASSIFIED Variable Discretisation for Anomaly Detection using Bayesian Networks Jonathan Legg National Security and ISR Division Defence Science...and Technology Group DST- Group –TR–3328 ABSTRACT Anomaly detection is the process by which low probability events are automatically found against a

Scanning Hardwood Lumber for Processing and Grading - What To Do Now and Why

Treesearch

D. Earl Kline; Richard Conners; Philip A. Araman

1997-01-01

A cooperative effort between Virginia Tech, the USDA Forest Service, and the industry has led to the development of a new scanning technology to automatically detect lumber grading features that affect the value of the end product. This effort has resulted in several commercial scanning systems now available through Group Seven Systems and Nova Technologies. These...

Educational Technology in Europe: Current Issues from the Learning Sciences Perspectives

ERIC Educational Resources Information Center

Cress, Ulrike

2012-01-01

The article describes Web 2.0 as a revolutionary technology for actual learning. Using the example of the Wikipedia article about Fukushima, it discusses emergent processes of knowledge building and explains how they can be used for learning purposes. The examples make it obvious that it is the social system that makes groups work so effectively.…

The Open University System of Brazil: A Study of Learner Support Facilities in the Northern, North-Eastern and Southern Regions

ERIC Educational Resources Information Center

Da Cruz Duran, Maria Renata; Da Costa, Celso José; Amiel, Tel

2014-01-01

Since June 2011, research on the Open University System of Brazil's (UAB's) official evaluation processes relating to learner support facilities has been carried out by the Teachers' Training, New Information, Communication and Technologies research group, which is linked to the Laboratory of New Technologies for Teaching at Fluminense Federal…

Students' Guided Reinvention of Definition of Limit of a Sequence with Interactive Technology

ERIC Educational Resources Information Center

Flores, Alfinio; Park, Jungeun

2016-01-01

In a course emphasizing interactive technology, 19 students, including 18 mathematics education majors, mostly in their first year, reinvented the definition of limit of a sequence while working in small cooperative groups. The class spent four sessions of 75 minutes each on a cyclical process of guided reinvention of the definition of limit of a…

All-printed capacitors with continuous solution dispensing technology

NASA Astrophysics Data System (ADS)

Ge, Yang; Plötner, Matthias; Berndt, Andreas; Kumar, Amit; Voit, Brigitte; Pospiech, Doris; Fischer, Wolf-Joachim

2017-09-01

Printed electronics have been introduced into the commercial markets in recent years. Various printing technologies have emerged aiming to process printed electronic devices with low cost, environmental friendliness, and compatibility with large areas and flexible substrates. The aim of this study is to propose a continuous solution dispensing technology for processing all-printed thin-film capacitors on glass substrates using a leading-edge printing instrument. Among all printing technologies, this study provides concrete proof of the following outstanding advantages of this technology: high tolerance to inks, high throughput, low cost, and precise pattern transfers. Ag nanoparticle ink based on glycol ethers was used to print the electrodes. To obtain dielectric ink, a copolymer powder of poly(methyl methacrylate-co-benzoylphenyl methacrylate) containing crosslinkable side groups was dissolved in anisole. Various layouts were designed to support multiple electronic applications. Scanning electron microscopy and atomic force microscopy were used to investigate the all-printed capacitor layers formed using the proposed process. Additionally, the printed capacitors were electrically characterized under direct current and alternating current. The measured electrical properties of the printed capacitors were consistent with the theoretical results.

Active Classroom Participation in a Group Scribbles Primary Science Classroom

ERIC Educational Resources Information Center

Chen, Wenli; Looi, Chee-Kit

2011-01-01

A key stimulus of learning efficacy for students in the classroom is active participation and engagement in the learning process. This study examines the nature of teacher-student and student-student discourse when leveraged by an interactive technology--Group Scribbles (GS) in a Primary 5 Science classroom in Singapore which supports rapid…

Assessment and Support of the Idea Co-Construction Process that Influences Collaboration

ERIC Educational Resources Information Center

Gweon, Gahgene

2012-01-01

Research in team science suggests strategies for addressing difficulties that groups face when working together. This dissertation examines how student teams work in project based learning (PBL) environments, with the goal of creating strategies and technology to improve collaboration. The challenge of working in such a group is that the members…

Partial connectivity increases cultural accumulation within groups.

PubMed

Derex, Maxime; Boyd, Robert

2016-03-15

Complex technologies used in most human societies are beyond the inventive capacities of individuals. Instead, they result from a cumulative process in which innovations are gradually added to existing cultural traits across many generations. Recent work suggests that a population's ability to develop complex technologies is positively affected by its size and connectedness. Here, we present a simple computer-based experiment that compares the accumulation of innovations by fully and partially connected groups of the same size in a complex fitness landscape. We find that the propensity to learn from successful individuals drastically reduces cultural diversity within fully connected groups. In comparison, partially connected groups produce more diverse solutions, and this diversity allows them to develop complex solutions that are never produced in fully connected groups. These results suggest that explanations of ancestral patterns of cultural complexity may need to consider levels of population fragmentation and interaction patterns between partially isolated groups.

Partial connectivity increases cultural accumulation within groups

PubMed Central

Boyd, Robert

2016-01-01

Complex technologies used in most human societies are beyond the inventive capacities of individuals. Instead, they result from a cumulative process in which innovations are gradually added to existing cultural traits across many generations. Recent work suggests that a population’s ability to develop complex technologies is positively affected by its size and connectedness. Here, we present a simple computer-based experiment that compares the accumulation of innovations by fully and partially connected groups of the same size in a complex fitness landscape. We find that the propensity to learn from successful individuals drastically reduces cultural diversity within fully connected groups. In comparison, partially connected groups produce more diverse solutions, and this diversity allows them to develop complex solutions that are never produced in fully connected groups. These results suggest that explanations of ancestral patterns of cultural complexity may need to consider levels of population fragmentation and interaction patterns between partially isolated groups. PMID:26929364

OAST Space Theme Workshop. Volume 3: Working group summary. 2: Data handling, communications (E-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

Technologies required to support the stated OAST thrust to increase information return by X1000, while reducing costs by a factor of 10 are identified. The most significant driver is the need for an overall end-to-end data system management technology. Maximum use of LSI component technology and trade-offs between hardware and software are manifest in most all considerations of technology needs. By far, the greatest need for data handling technology was identified for the space Exploration and Global Services themes. Major advances are needed in NASA's ability to provide cost effective mass reduction of space data, and automated assessment of earth looking imagery, with a concomitant reduction in cost per useful bit. A combined approach embodying end-to-end system analysis, with onboard data set selection, onboard data processing, highly parallel image processing (both ground and space), low cost, high capacity memories, and low cost user data distribution systems would be necessary.

Physico-chemical foundations underpinning microarray and next-generation sequencing experiments

PubMed Central

Harrison, Andrew; Binder, Hans; Buhot, Arnaud; Burden, Conrad J.; Carlon, Enrico; Gibas, Cynthia; Gamble, Lara J.; Halperin, Avraham; Hooyberghs, Jef; Kreil, David P.; Levicky, Rastislav; Noble, Peter A.; Ott, Albrecht; Pettitt, B. Montgomery; Tautz, Diethard; Pozhitkov, Alexander E.

2013-01-01

Hybridization of nucleic acids on solid surfaces is a key process involved in high-throughput technologies such as microarrays and, in some cases, next-generation sequencing (NGS). A physical understanding of the hybridization process helps to determine the accuracy of these technologies. The goal of a widespread research program is to develop reliable transformations between the raw signals reported by the technologies and individual molecular concentrations from an ensemble of nucleic acids. This research has inputs from many areas, from bioinformatics and biostatistics, to theoretical and experimental biochemistry and biophysics, to computer simulations. A group of leading researchers met in Ploen Germany in 2011 to discuss present knowledge and limitations of our physico-chemical understanding of high-throughput nucleic acid technologies. This meeting inspired us to write this summary, which provides an overview of the state-of-the-art approaches based on physico-chemical foundation to modeling of the nucleic acids hybridization process on solid surfaces. In addition, practical application of current knowledge is emphasized. PMID:23307556

Environmental, technical and technological aspects of hazardous waste management in Poland

NASA Astrophysics Data System (ADS)

Pyssa, Justyna

2017-10-01

The issue of recovery and disposal of hazardous waste is not a new concern. The waste comes from various processes and technologies and therefore the bigger emphasis should be placed on reducing quantities of generated hazardous waste (which is often connected with changes in the technology of manufacturing a given product) and limitation of their negative influence on natural environment. Plants specializing in waste processing processes should meet the so-called cardinal triad of conditions deciding on the full success of investment, and namely: economic effectiveness, ecological efficiency and social acceptance. The structure of generation of hazardous waste in EU-28 has been presented in the paper. Methods of hazardous waste disposal in Poland have been discussed. Economic and ecological criteria for the selection of technology of hazardous waste disposal have been analyzed. The influence of the hazardous waste on the environment is also presented. For four groups of waste, which are currently stored, alternative methods of disposal have been proposed.

Hybridity as a process of technology's 'translation': customizing a national Electronic Patient Record.

PubMed

Petrakaki, Dimitra; Klecun, Ela

2015-01-01

This paper explores how national Electronic Patient Record (EPR) systems are customized in local settings and, in particular, how the context of their origin plays out with the context of their use. It shows how representations of healthcare organizations and of local clinical practice are built into EPR systems within a complex context whereby different stakeholder groups negotiate to produce an EPR package that aims to meet both local and generic needs. The paper draws from research into the implementation of the National Care Record Service, a part of the National Programme for Information Technology (NPfIT), in the English National Health Service (NHS). The paper makes two arguments. First, customization of national EPR is a distributed process that involves cycles of 'translation', which span across geographical, cultural and professional boundaries. Second, 'translation' is an inherently political process during which hybrid technology gets consolidated. The paper concludes, that hybrid technology opens up possibilities for standardization of healthcare. Copyright © 2014 Elsevier Ltd. All rights reserved.

Wastewater recycling technology for fermentation in polyunsaturated fatty acid production.

PubMed

Song, Xiaojin; Ma, Zengxin; Tan, Yanzhen; Zhang, Huidan; Cui, Qiu

2017-07-01

To reduce fermentation-associated wastewater discharge and the cost of wastewater treatment, which further reduces the total cost of DHA and ARA production, this study first analyzed the composition of wastewater from Aurantiochytrium (DHA) and Mortierella alpina (ARA) fermentation, after which wastewater recycling technology for these fermentation processes was developed. No negative effects of DHA and ARA production were observed when the two fermentation wastewater methods were cross-recycled. DHA and ARA yields were significantly inhibited when the wastewater from the fermentation process was directly reused. In 5-L fed-batch fermentation experiments, using this cross-recycle technology, the DHA and ARA yields were 30.4 and 5.13gL -1 , respectively, with no significant changes (P>0.05) compared to the control group, and the water consumption was reduced by half compared to the traditional process. Therefore, this technology has great potential in industrial fermentation for polyunsaturated fatty acid production. Copyright © 2017 Elsevier Ltd. All rights reserved.

How do we evaluate the cost of healthcare technology?

NASA Astrophysics Data System (ADS)

Nobel, Joel J.

1994-12-01

Five critical questions apply when evaluating the cost of healthcare technology: Who is asking the question (of how to evaluate healthcare costs)? For what purpose? What is the nature of the decision that must be made? At what state of a technology's development and diffusion are the questions being posed? What type of technology is stimulating the questions? A large number of organizations, both national and international, are engaged in technology assessment, and constructive disagreement improves the overall quality of those assessments. Current cost measurements tools such as cost-utility analysis, cost-benefit analysis, cost- effectiveness analysis, and outcomes research are weak and ineffective. Recently, pharmaceutical manufacturers have adopted more global cost-effectiveness studies. Technology assessments will ultimately focus on examining the relative cost-effectiveness of alternative technologies for a specific pathology or examining the relative cost-effectiveness of alternative technologies for a specific pathology or DRG. In addition to the traditional healthcare facility--hospital, outpatient facility, or group practice, group purchasing organizations are also asking about cost-effectiveness of healthcare. ECRI's SELECTTM process, unlike less effective technology assessments, takes into account real-world user experience data and life-cycle cost analysis in addition to detailed comparisons of technical features and performance.

Technology adoption and implementation in organisations: comparative case studies of 12 English NHS Trusts

PubMed Central

Ahmad, Raheelah; Holmes, Alison

2012-01-01

Objectives To understand organisational technology adoption (initiation, adoption decision, implementation) by looking at the different types of innovation knowledge used during this process. Design Qualitative, multisite, comparative case study design. Setting One primary care and 11 acute care organisations (trusts) across all health regions in England in the context of infection prevention and control. Participants and data analysis 121 semistructured individual and group interviews with 109 informants, involving clinical and non-clinical staff from all organisational levels and various professional groups. Documentary evidence and field notes were also used. 38 technology adoption processes were analysed using an integrated approach combining inductive and deductive reasoning. Main findings Those involved in the process variably accessed three types of innovation knowledge: ‘awareness’ (information that an innovation exists), ‘principles’ (information about an innovation's functioning principles) and ‘how-to’ (information required to use an innovation properly at individual and organisational levels). Centralised (national, government-led) and local sources were used to obtain this knowledge. Localised professional networks were preferred sources for all three types of knowledge. Professional backgrounds influenced an asymmetric attention to different types of innovation knowledge. When less attention was given to ‘how-to’ compared with ‘principles’ knowledge at the early stages of the process, this contributed to 12 cases of incomplete implementation or discontinuance after initial adoption. Conclusions Potential adopters and change agents often overlooked or undervalued ‘how-to’ knowledge. Balancing ‘principles’ and ‘how-to’ knowledge early in the innovation process enhanced successful technology adoption and implementation by considering efficacy as well as strategic, structural and cultural fit with the organisation's context. This learning is critical given the policy emphasis for health organisations to be innovation-ready. PMID:22492183

New technology and regional studies in human ecology: A Papua New Guinea example

NASA Technical Reports Server (NTRS)

Morren, George E. B., Jr.

1991-01-01

Two key issues in using technologies such as digital image processing and geographic information systems are a conceptually and methodologically valid research design and the exploitation of varied sources of data. With this realized, the new technologies offer anthropologists the opportunity to test hypotheses about spatial and temporal variations in the features of interest within a regionally coherent mosaic of social groups and landscapes. Current research on the Mountain OK of Papua New Guinea is described with reference to these issues.

Describing functional requirements for knowledge sharing communities

NASA Technical Reports Server (NTRS)

Garrett, Sandra; Caldwell, Barrett

2002-01-01

Human collaboration in distributed knowledge sharing groups depends on the functionality of information and communication technologies (ICT) to support performance. Since many of these dynamic environments are constrained by time limits, knowledge must be shared efficiently by adapting the level of information detail to the specific situation. This paper focuses on the process of knowledge and context sharing with and without mediation by ICT, as well as issues to be resolved when determining appropriate ICT channels. Both technology-rich and non-technology examples are discussed.

Illumina Production Sequencing at the DOE Joint Genome Institute - Workflow and Optimizations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarver, Angela; Fern, Alison; Diego, Matthew San

2010-06-18

The U.S. Department of Energy (DOE) Joint Genome Institute?s (JGI) Production Sequencing group is committed to the generation of high-quality genomic DNA sequence to support the DOE mission areas of renewable energy generation, global carbon management, and environmental characterization and clean-up. Within the JGI?s Production Sequencing group, the Illumina Genome Analyzer pipeline has been established as one of three sequencing platforms, along with Roche/454 and ABI/Sanger. Optimization of the Illumina pipeline has been ongoing with the aim of continual process improvement of the laboratory workflow. These process improvement projects are being led by the JGI?s Process Optimization, Sequencing Technologies, Instrumentation&more » Engineering, and the New Technology Production groups. Primary focus has been on improving the procedural ergonomics and the technicians? operating environment, reducing manually intensive technician operations with different tools, reducing associated production costs, and improving the overall process and generated sequence quality. The U.S. DOE JGI was established in 1997 in Walnut Creek, CA, to unite the expertise and resources of five national laboratories? Lawrence Berkeley, Lawrence Livermore, Los Alamos, Oak Ridge, and Pacific Northwest ? along with HudsonAlpha Institute for Biotechnology. JGI is operated by the University of California for the U.S. DOE.« less

Vehicle health management technology needs

NASA Technical Reports Server (NTRS)

Hammond, Walter E.; Jones, W. G.

1992-01-01

Background material on vehicle health management (VHM) and health monitoring/control is presented. VHM benefits are described and a list of VHM technology needs that should be pursued is presented. The NASA funding process as it impacts VHM technology funding is touched upon, and the VHM architecture guidelines for generic launch vehicles are described. An example of a good VHM architecture, design, and operational philosophy as it was conceptualized for the National Launch System program is presented. Consideration is given to the Strategic Avionics Technology Working Group's role in VHM, earth-to-orbit, and space vehicle avionics technology development considerations, and some actual examples of VHM benefits for checkout are given.

Technology Being Developed at Lawrence Berkeley National Laboratory: Ultra-Low- Emission Combustion Technologies for Heat and Power Generation

NASA Technical Reports Server (NTRS)

Cheng, Robert K.

2001-01-01

The Combustion Technologies Group at Lawrence Berkeley National Laboratory has developed simple, low-cost, yet robust combustion technologies that may change the fundamental design concept of burners for boilers and furnaces, and injectors for gas turbine combustors. The new technologies utilize lean premixed combustion and could bring about significant pollution reductions from commercial and industrial combustion processes and may also improve efficiency. The technologies are spinoffs of two fundamental research projects: An inner-ring burner insert for lean flame stabilization developed for NASA- sponsored reduced-gravity combustion experiments. A low-swirl burner developed for Department of Energy Basic Energy Sciences research on turbulent combustion.

The influence of expert opinions on the selection of wastewater treatment alternatives: a group decision-making approach.

PubMed

Kalbar, Pradip P; Karmakar, Subhankar; Asolekar, Shyam R

2013-10-15

The application of multiple-attribute decision-making (MADM) to real life decision problems suggests that avoiding the loss of information through scenario-based approaches and including expert opinions in the decision-making process are two major challenges that require more research efforts. Recently, a wastewater treatment technology selection effort has been made with a 'scenario-based' method of MADM. This paper focuses on a novel approach to incorporate expert opinions into the scenario-based decision-making process, as expert opinions play a major role in the selection of treatment technologies. The sets of criteria and the indicators that are used consist of both qualitative and quantitative criteria. The group decision-making (GDM) approach that is implemented for aggregating expert opinions is based on an analytical hierarchy process (AHP), which is the most widely used MADM method. The pairwise comparison matrices (PCMs) for qualitative criteria are formed based on expert opinions, whereas, a novel approach is proposed for generating PCMs for quantitative criteria. It has been determined that the experts largely prefer natural treatment systems because they are more sustainable in any scenario. However, PCMs based on expert opinions suggest that advanced technologies such as the sequencing batch reactor (SBR) can also be appropriate for a given decision scenario. The proposed GDM approach is a rationalized process that will be more appropriate in realistic scenarios where multiple stakeholders with local and regional societal priorities are involved in the selection of treatment technology. Copyright © 2013 Elsevier Ltd. All rights reserved.

Patterns of Scaffolding in Computer-Mediated Collaborative Inquiry

ERIC Educational Resources Information Center

Lakkala, Minna; Muukkonen, Hanni; Hakkarainen, Kai

2005-01-01

There is wide agreement on the importance of scaffolding for student learning. Yet, models of individual and face-to-face scaffolding are not necessarily applicable to educational settings in which a group of learners is pursuing a process of inquiry mediated by technology. The scaffolding needed for such a process may be examined from three…

Towards Online Delivery of Process-Oriented Guided Inquiry Learning Techniques in Information Technology Courses

ERIC Educational Resources Information Center

Trevathan, Jarrod; Myers, Trina

2013-01-01

Process-Oriented Guided Inquiry Learning (POGIL) is a technique used to teach in large lectures and tutorials. It invokes interaction, team building, learning and interest through highly structured group work. Currently, POGIL has only been implemented in traditional classroom settings where all participants are physically present. However,…

Technology assessment or technology harassment: The attacks on science and technology

NASA Technical Reports Server (NTRS)

Green, L., Jr.

1972-01-01

The manner in which technology is being assessed by various groups and individuals is discussed. Attacks on science and technology (specifically military uses and funding), and the disillusionment of the public with the lack of relevance of science to the public interest and with the infallible wisdom of scientists are described. The effects of the fear of environmental pollution are emphasized. It is concluded that the important issues of science, technology, and public policy will require a pluralistic definition of the public interest by open adversary proceedings. It is also felt that the danger is not that new technology will receive inadequate assessment for possible deleterious secondary effects, but that harassment by an overemotional political process may prevent its coming to fruition.

Community-based assessment and planning of energy futures

NASA Astrophysics Data System (ADS)

Carnes, S. A.

1981-04-01

The decentralized solar energy technology assessment program is discussed. Four communities were involved in an assessment of the compatibility of diverse conservation and renewable energy supply technologies and community values and goals and in community planning for the implementation of compatible energy demand and supply alternatives. The community approach has several basic components: (1) recruiting and organizing for the assessment planning process; (2) collection and analysis of data related to community energy use and indigenous renewable energy resources; (3) creation and maintenance of a community education and information program; (4) development of policies favorable to the development of preferred community futures; and (5) development of implementation or action strategies. The role of public participation, group decision making techniques, the role of technical information in citizen and group decision making, and linkage between assessment planning and the relevant policy process are emphasized.

Perspectives of healthcare practitioners: An exploration of interprofessional communication using electronic medical records.

PubMed

Bardach, Shoshana H; Real, Kevin; Bardach, David R

2017-05-01

Contemporary state-of-the-art healthcare facilities are incorporating technology into their building design to improve communication and patient care. However, technological innovations may also have unintended consequences. This study seeks to better understand how technology influences interprofessional communication within a hospital setting based in the United States. Nine focus groups were conducted including a range of healthcare professions. The focus groups explored practitioners' experiences working on two floors of a newly designed hospital and included questions about the ways in which technology shaped communication with other healthcare professionals. All focus groups were recorded, transcribed, and coded to identify themes. Participant responses focused on the electronic medical record, and while some benefits of the electronic medical record were discussed, participants indicated use of the electronic medical record has resulted in a reduction of in-person communication. Different charting approaches resulted in barriers to communication between specialties and reduced confidence that other practitioners had received one's notes. Limitations in technology-including limited computer availability, documentation complexity, and sluggish sign-in processes-also were identified as barriers to effective and timely communication between practitioners. Given the ways in which technology shapes interprofessional communication, future research should explore how to create standardised electronic medical record use across professions at the optimal level to support communication and patient care.

Study on the key alignment technology of the catadioptric optical system

NASA Astrophysics Data System (ADS)

Song, Chong; Fu, Xing; Fu, Xi-hong; Kang, Xiao-peng; Liu, Kai

2017-02-01

Optical system alignment has a great influence on the whole system accuracy. In this paper, the processing of optical system alignment was mainly studied, the processing method of optics on the primary and secondary mirrors, front correction lens group and behind correction lens group with high precision centering lathe and internal focusing telescope. Then using the height indicator complete the system alignment of the primary mirror, secondary mirror, front correction group and behind correction group. Finally, based on the zygo interferometer detect the wavefront information. Using this alignment program for catadioptric optical system, the wavefront aberration of optical system, focal length, modulation transfer function (MTF) and other technical indicators have reached the requirements.

Research on cognitive, social and cultural processes of written communication.

PubMed

Arroyo González, Rosario; Salvador Mata, Francisco

2009-08-01

This article compiles the investigations carried out by a Research Group of the University of Granada, Spain. Its different projects on writing's cognitive social and cultural processes have been supported by the Spanish Government. This line of research joined together linguistic, psychological, social and cultural contributions to the development of writing from the 1970s. Currently, this line of research develops in collaboration with other European Universities: (a) Interuniversity Centre for Research On Cognitive Processing in Natural and Artificial Systems (ECONA), "La Sapienza" University of Rome (Italy); (b) Anadolu University, (Eskisehir, Turkey); (c) Coimbra University (Portugal); (d) University of Zaragoza (Spain); (e) the Institute of Education of the University of London (United Kingdom). The aforementioned collaboration is materializing into projects like the International Master on Multilingual Writing: Cognitive, Intercultural and Technological Processes of Written Communication ( http://www.multilingualwriting.com ) and the International Congress: Writing in the twenty-first Century: Cognition, Multilinguisim and Technologies, held in Granada ( http://www.asprogrades.org ). This research line is focussed on the development of strategies in writing development, basic to train twenty-first century societies' citizens. In these societies, participation in production media, social exchange and the development of multilingual written communication skills through new computer technologies spread multicultural values. In order to fulfil the social exigencies, it is needed to have the collaboration of research groups for designing and applying international research projects.

Window encapsulation in car industry by using the 50 {Omega} RF technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, J.P.; Barboteau, M.; Collet, L.

Throughout the world car industry has been using window encapsulation for a few years now. This technology is mainly used in production lines and is called RIM for polyurethane reaction injection moulding. This technology, however brings about some problems such as: glass breaking during mould closure, high production cost, systematic rough edges. The PSA Group (Peugeot-Citroen), a pioneer in this field, in collaboration with SAIREM has launched a new innovating process for window encapsulation by using the 50 {Omega} RF technology for gelling PVC Plastisol. The study was followed by an industrial prototype. Industrial equipment was then installed at WEBASTOmore » HEULIEZ for window encapsulation of the sunshine roof for the Citroen Xantia. The authors describe the principle of window encapsulation and the different existing processes. They describe the 50 {Omega} RF technology, an industrial installation and the constraints of this technology in order to get maximum efficiency. In the conclusion they present a technical and economical analysis of the different solutions for window encapsulation. They also present the advantages of the 50 {Omega} RF technology and the new opportunities it offers.« less

Looking for Science and Mathematics in All the Right Places: Using Mobile Technologies as Culturally-Sensitive Pedagogical Tools to Capture Generative Images

ERIC Educational Resources Information Center

Arreguin-Anderson, Maria G.; Ruiz, Elsa Cantu

2013-01-01

The exploration into cultural practices occurring in households has become more fluid and transparent process thanks to the presence of mobile technologies that allow members of a group to capture daily occurrences. This case study explored ways in which three Latino preservice teachers used mobile devices to discover connections between…

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies

PubMed Central

2018-01-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers’ particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices. PMID:29862314

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies.

PubMed

Haas, Emily J

2018-03-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers' particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices.

Creating Joint Representations of Collaborative Problem Solving with Multi-Touch Technology

ERIC Educational Resources Information Center

Mercier, E.; Higgins, S.

2014-01-01

Multi-touch surfaces have the potential to change the nature of computer-supported collaborative learning, allowing more equitable access to shared digital content. In this paper, we explore how large multi-touch tables can be used by groups of students as an external representation of their group interaction processes. Video data from 24 groups…

What Factors Affect the Way Teams Interact in an On-Line Graduate Course?

ERIC Educational Resources Information Center

Ingram, K. W.; Conley, C.; McDonald, S.; Parker, V.; Rivers, J.

This study examined how adult graduate students made use of technology to mediate group interactions and processes in an online learning environment, also noting why individual groups of students chose particular tools and methods. The online course was delivered using a third-party course management tool. The structure of the course and the use…

Teaching Reform of Course Group Regarding Theory and Design of Mechanisms Based on MATLAB Technology

ERIC Educational Resources Information Center

Shen, Yi; Yuan, Mingxin; Wang, Mingqiang

2013-01-01

Considering that the course group regarding theory and design of mechanisms is characterized by strong engineering application background and the students generally feel very boring and tedious during the learning process, some teaching reforms for the theory and design of mechanisms are carried out to improve the teaching effectiveness in this…

[Oocytes cryopreservation: in which circumstances? Who should pay? Approaches amongst attending IVF physicians and researchers in the field of bioethics and health regulation].

PubMed

Malkiel, Avishay; Chinitz, David; Lehmann, Lisa Soleymani; Brezis, Mayer

2010-10-01

In recent years there have been significant advances in the process of oocyte cryopreservation. Advanced techniques including vitrification have seen increasing success rates of fertilization. These successes warrant renewed public consideration and debate on several issues: In what circumstances? Who should pay? How should the process be regulated? Our goals were to examine the approach to oocyte cryopreservation amongst attending in-vitro fertilization (IVF) physicians and amongst researchers in the field of bioethics and health regulation. Questionnaires regarding egg freezing were given to physicians heading IVF departments in Israel, and to bioethics researchers / health care administrators. Among the two groups questioned, there is strong support (80%) for the freezing of oocytes for personal circumstances, which may not be purely medical. Despite this support, there appears to be a difference in reasoning for this support. While most physicians see no reason to inhibit using the technology, bioethicists attend to the conflict between personal liberties and potentially troubling ethical consequences on society when utilizing these technologies. There is an additional discrepancy between the groups concerning regulation. Physicians prefer regulation by administrative means, while bioethicists would prefer regulation by Laws. Despite widespread support of oocyte cryopreservation for personal reasons among the two groups questioned, their views arise from different rationales. implementation of egg freezing technologies requires careful interdisciplinary discussion in order to consider the various medical, ethical, and sociological factors that these technologies will incur.

Care networking: a study of technical mediations in a home telecare service.

PubMed

Correa, Gonzalo; Domènech, Miquel

2013-07-22

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor-network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships.

Care Networking: A Study of Technical Mediations in a Home Telecare Service

PubMed Central

Correa, Gonzalo; Domènech, Miquel

2013-01-01

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor—network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships. PMID:23880730

Status report on the land processes aircraft science management operations working group

NASA Technical Reports Server (NTRS)

Lawless, James G.; Mann, Lisa J.

1991-01-01

Since its inception three years ago, the Land Processes Aircraft Science Management Operations Working Group (MOWG) provided recommendations on the optimal use of the Agency's aircraft in support of the Land Processes Science Program. Recommendations covered topics such as aircraft and sensor usage, development of long-range plans, Multisensor Airborne Campaigns (MAC), program balance, aircraft sensor databases, new technology and sensor development, and increased University scientist participation in the program. Impacts of these recommendations improved the efficiency of various procedures including the flight request process, tracking of flight hours, and aircraft usage. The group also created a bibliography focused on publications produced by Land Processes scientists from the use of the aircraft program, surveyed NASA funded PI's on their participation in the aircraft program, and developed a planning template for multi-sensor airborne campaigns. Benefits from these activities are summarized.

Challenges in the development and reimbursement of personalized medicine-payer and manufacturer perspectives and implications for health economics and outcomes research: a report of the ISPOR personalized medicine special interest group.

PubMed

Faulkner, Eric; Annemans, Lieven; Garrison, Lou; Helfand, Mark; Holtorf, Anke-Peggy; Hornberger, John; Hughes, Dyfrig; Li, Tracy; Malone, Daniel; Payne, Katherine; Siebert, Uwe; Towse, Adrian; Veenstra, David; Watkins, John

2012-12-01

Personalized medicine technologies can improve individual health by delivering the right dose of the right drug to the right patient at the right time but create challenges in deciding which technologies offer sufficient value to justify widespread diffusion. Personalized medicine technologies, however, do not neatly fit into existing health technology assessment and reimbursement processes. In this article, the Personalized Medicine Special Interest Group of the International Society for Pharmacoeconomics and Outcomes Research evaluated key development and reimbursement considerations from the payer and manufacturer perspectives. Five key areas in which health economics and outcomes research best practices could be developed to improve value assessment, reimbursement, and patient access decisions for personalized medicine have been identified. These areas are as follows: 1 research prioritization and early value assessment, 2 best practices for clinical evidence development, 3 best practices for health economic assessment, 4 addressing health technology assessment challenges, and 5 new incentive and reimbursement approaches for personalized medicine. Key gaps in health economics and outcomes research best practices, decision standards, and value assessment processes are also discussed, along with next steps for evolving health economics and outcomes research practices in personalized medicine. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Internet-based profiler system as integrative framework to support translational research

PubMed Central

Kim, Robert; Demichelis, Francesca; Tang, Jeffery; Riva, Alberto; Shen, Ronglai; Gibbs, Doug F; Mahavishno, Vasudeva; Chinnaiyan, Arul M; Rubin, Mark A

2005-01-01

Background Translational research requires taking basic science observations and developing them into clinically useful tests and therapeutics. We have developed a process to develop molecular biomarkers for diagnosis and prognosis by integrating tissue microarray (TMA) technology and an internet-database tool, Profiler. TMA technology allows investigators to study hundreds of patient samples on a single glass slide resulting in the conservation of tissue and the reduction in inter-experimental variability. The Profiler system allows investigator to reliably track, store, and evaluate TMA experiments. Here within we describe the process that has evolved through an empirical basis over the past 5 years at two academic institutions. Results The generic design of this system makes it compatible with multiple organ system (e.g., prostate, breast, lung, renal, and hematopoietic system,). Studies and folders are restricted to authorized users as required. Over the past 5 years, investigators at 2 academic institutions have scanned 656 TMA experiments and collected 63,311 digital images of these tissue samples. 68 pathologists from 12 major user groups have accessed the system. Two groups directly link clinical data from over 500 patients for immediate access and the remaining groups choose to maintain clinical and pathology data on separate systems. Profiler currently has 170 K data points such as staining intensity, tumor grade, and nuclear size. Due to the relational database structure, analysis can be easily performed on single or multiple TMA experimental results. The TMA module of Profiler can maintain images acquired from multiple systems. Conclusion We have developed a robust process to develop molecular biomarkers using TMA technology and an internet-based database system to track all steps of this process. This system is extendable to other types of molecular data as separate modules and is freely available to academic institutions for licensing. PMID:16364175

Internet-based Profiler system as integrative framework to support translational research.

PubMed

Kim, Robert; Demichelis, Francesca; Tang, Jeffery; Riva, Alberto; Shen, Ronglai; Gibbs, Doug F; Mahavishno, Vasudeva; Chinnaiyan, Arul M; Rubin, Mark A

2005-12-19

Translational research requires taking basic science observations and developing them into clinically useful tests and therapeutics. We have developed a process to develop molecular biomarkers for diagnosis and prognosis by integrating tissue microarray (TMA) technology and an internet-database tool, Profiler. TMA technology allows investigators to study hundreds of patient samples on a single glass slide resulting in the conservation of tissue and the reduction in inter-experimental variability. The Profiler system allows investigator to reliably track, store, and evaluate TMA experiments. Here within we describe the process that has evolved through an empirical basis over the past 5 years at two academic institutions. The generic design of this system makes it compatible with multiple organ system (e.g., prostate, breast, lung, renal, and hematopoietic system,). Studies and folders are restricted to authorized users as required. Over the past 5 years, investigators at 2 academic institutions have scanned 656 TMA experiments and collected 63,311 digital images of these tissue samples. 68 pathologists from 12 major user groups have accessed the system. Two groups directly link clinical data from over 500 patients for immediate access and the remaining groups choose to maintain clinical and pathology data on separate systems. Profiler currently has 170 K data points such as staining intensity, tumor grade, and nuclear size. Due to the relational database structure, analysis can be easily performed on single or multiple TMA experimental results. The TMA module of Profiler can maintain images acquired from multiple systems. We have developed a robust process to develop molecular biomarkers using TMA technology and an internet-based database system to track all steps of this process. This system is extendable to other types of molecular data as separate modules and is freely available to academic institutions for licensing.

Use of Electronic Technologies to Promote Community and Personal Health for Individuals Unconnected to Health Care Systems

PubMed Central

Crilly, John F.; Volpe, Fred

2011-01-01

Ensuring health care services for populations outside the mainstream health care system is challenging for all providers. But developing the health care infrastructure to better serve such unconnected individuals is critical to their health care status, to third-party payers, to overall cost savings in public health, and to reducing health disparities. Our increasingly sophisticated electronic technologies offer promising ways to more effectively engage this difficult to reach group and increase its access to health care resources. This process requires developing not only newer technologies but also collaboration between community leaders and health care providers to bring unconnected individuals into formal health care systems. We present three strategies to reach vulnerable groups, outline benefits and challenges, and provide examples of successful programs. PMID:21566023

Discovery of Implementation Factors That Lead to Technology Adoption in Long-Term Care.

PubMed

Schoville, Rhonda R

2017-10-01

The current exploratory, qualitative study discovered and clarified implementation factors that led to technology adoption in long-term care (LTC). The Integrated Technology Implementation model guided the study of an electronic health record used in three LTC settings. Thirty key stakeholders (i.e., directors of nursing, nurses, and certified nurse aides) participated in focus groups or interviews. Findings indicated experiences were more similar than different among groups and facilities. Five major implementation themes supported by a variety of minor themes were identified. Implications for nursing include that leaders must be knowledgeable and committed to the change and engage staff throughout the implementation process. In addition, various communication and education strategies are required. [Journal of Gerontological Nursing, 43(10), 21-26.]. Copyright 2017, SLACK Incorporated.

Future Space Transportation Technology: Prospects and Priorities

NASA Technical Reports Server (NTRS)

Billie, Matt; Reed, Lisa; Harris, David

2003-01-01

The Transportation Working Group (TWG) was chartered by the NASA Exploration Team (NEXT) to conceptualize, define, and advocate within NASA the space transportation architectures and technologies required to enable the human and robotic exploration and development of space envisioned by the NEXT. In 2002, the NEXT tasked the TWG to assess exploration space transportation requirements versus current and prospective Earth-to-Orbit (ETO) and in-space transportation systems, technologies, and research, in order to identify investment gaps and recommend priorities. The result was a study now being incorporated into future planning by the NASA Space Architect and supporting organizations. This paper documents the process used to identify exploration space transportation investment gaps, as well as the group's recommendations for closing these gaps and prioritizing areas of future investment for NASA work on advanced propulsion systems.

Involving patients in health technology funding decisions: stakeholder perspectives on processes used in Australia.

PubMed

Lopes, Edilene; Street, Jackie; Carter, Drew; Merlin, Tracy

2016-04-01

Governments use a variety of processes to incorporate public perspectives into policymaking, but few studies have evaluated these processes from participants' point of view. The objective of this study was twofold: to understand the perspectives of selected stakeholders with regard to involvement processes used by Australian Advisory Committees to engage the public and patients; and to identify barriers and facilitators to participation. Twelve semi-structured interviews were conducted with representatives of different stakeholder groups involved in health technology funding decisions in Australia. Data were collected and analysed using a theoretical framework created by Rowe and Frewer, but adapted to more fully acknowledge issues of power and influence. Stakeholder groups disagreed as to what constitutes effective and inclusive patient involvement. Barriers reported by interviewees included poor communication, a lack of transparency, unworkable deadlines, and inadequate representativeness. Also described were problems associated with defining the task for patients and their advocates and with the timing of patient input in the decision-making process. Interviewees suggested that patient participation could be improved by increasing the number of patient organizations engaged in processes and including those organizations at different stages of decision making, especially earlier. The different evaluations made by stakeholder groups appear to be underpinned by contrasting conceptions of public involvement and its value, in line with Graham Martin's work which distinguishes between 'technocratic' and 'democratic' public involvement. Understanding stakeholders' perspectives and the contrasting conceptions of public involvement could foster future agreement on which processes should be used to involve the public in decision making. © 2015 John Wiley & Sons Ltd.

Effect of an imaging-based streamlined electronic healthcare process on quality and costs.

PubMed

Bui, Alex A T; Taira, Ricky K; Goldman, Dana; Dionisio, John David N; Aberle, Denise R; El-Saden, Suzie; Sayre, James; Rice, Thomas; Kangarloo, Hooshang

2004-01-01

A streamlined process of care supported by technology and imaging may be effective in managing the overall healthcare process and costs. This study examined the effect of an imaging-based electronic process of care on costs and rates of hospitalization, emergency room (ER) visits, specialist diagnostic referrals, and patient satisfaction. A healthcare process was implemented for an employer group, highlighting improved patient access to primary care plus routine use of imaging and teleconsultation with diagnostic specialists. An electronic infrastructure supported patient access to physicians and communication among healthcare providers. The employer group, a self-insured company, manages a healthcare plan for its employees and their dependents: 4,072 employees were enrolled in the test group, and 7,639 in the control group. Outcome measures for expenses and frequency of hospitalizations, ER visits, traditional specialist referrals, primary care visits, and imaging utilization rates were measured using claims data over 1 year. Homogeneity tests of proportions were performed with a chi-square statistic, mean differences were tested by two-sample t-tests. Patient satisfaction with access to healthcare was gauged using results from an independent firm. Overall per member/per month costs post-implementation were lower in the enrolled population (126 dollars vs 160 dollars), even though occurrence of chronic/expensive diseases was higher in the enrolled group (18.8% vs 12.2%). Lower per member/per month costs were seen for inpatient (33.29 dollars vs 35.59 dollars); specialist referrals (21.36 dollars vs 26.84 dollars); and ER visits (3.68 dollars vs 5.22 dollars). Moreover, the utilization rate for hospital admissions, ER visits, and traditional specialist referrals were significantly lower in the enrolled group, although primary care and imaging utilization were higher. Comparison to similar employer groups showed that the company's costs were lower than national averages (119.24 dollars vs 146.32 dollars), indicating that the observed result was not attributable to normalization effects. Patient satisfaction with access to healthcare ranked in the top 21st percentile. A streamlined healthcare process supported by technology resulted in higher patient satisfaction and cost savings despite improved access to primary care and higher utilization of imaging.

Chemical Looping Technology: Oxygen Carrier Characteristics.

PubMed

Luo, Siwei; Zeng, Liang; Fan, Liang-Shih

2015-01-01

Chemical looping processes are characterized as promising carbonaceous fuel conversion technologies with the advantages of manageable CO2 capture and high energy conversion efficiency. Depending on the chemical looping reaction products generated, chemical looping technologies generally can be grouped into two types: chemical looping full oxidation (CLFO) and chemical looping partial oxidation (CLPO). In CLFO, carbonaceous fuels are fully oxidized to CO2 and H2O, as typically represented by chemical looping combustion with electricity as the primary product. In CLPO, however, carbonaceous fuels are partially oxidized, as typically represented by chemical looping gasification with syngas or hydrogen as the primary product. Both CLFO and CLPO share similar operational features; however, the optimum process configurations and the specific oxygen carriers used between them can vary significantly. Progress in both CLFO and CLPO is reviewed and analyzed with specific focus on oxygen carrier developments that characterize these technologies.

[Robot--a member of (re)habilitation team].

PubMed

Krasnik, Rastislava; Mikov, Aleksandra; Golubović, Spela; Komazec, Zoran; Komazec, Slobodanka Lemajić

2012-01-01

The rehabilitation process involves a whole team of experts who participate in it over a long period oftime. The Intensive development of science and technology has made it possible to design a number of robots which are used for therapeutic purposes and participate in the rehabilitation process. During the long history of technological development of mankind, a number of conceptual and technological solutions for the construction of robots have been known. By using robots in medical rehabilitation it is possible to implement the rehabilitation of peripheral and central motor neurons by increasing the motivation of patients for further recovery and effectiveness of therapy. The paper presents some technological solutions for robot-assisted rehabilitation of patients of different age groups and some possibilities of its use in the treatment. Using robots in standard physiotherapy protocols that involve a number of repetitions, exact dosage, quality design and adaptability to each individual patient leads to the significant progress in the rehabilitation of patients.

What does meaningful look like? A qualitative study of patient engagement at the Pan-Canadian Oncology Drug Review: perspectives of reviewers and payers.

PubMed

Rozmovits, Linda; Mai, Helen; Chambers, Alexandra; Chan, Kelvin

2018-04-01

Objectives While there is wide support for patient engagement in health technology assessment, determining what constitutes meaningful (as opposed to tokenistic) engagement is complex. This paper explores reviewer and payer perceptions of what constitutes meaningful patient engagement in the Pan-Canadian Oncology Drug Review process. Methods Qualitative interview study comprising 24 semi-structured telephone interviews. A qualitative descriptive approach, employing the technique of constant comparison, was used to produce a thematic analysis. Results Submissions from patient advocacy groups were seen as meaningful when they provided information unavailable from other sources. This included information not collected in clinical trials, information relevant to clinical trade-offs and information about aspects of lived experience such as geographic differences and patient and carer priorities. In contrast, patient submissions that relied on emotional appeals or lacked transparency about their own methods were seen as detracting from the meaningfulness of patient engagement by conflating health technology assessment with other functions of patient advocacy groups such as fundraising or public awareness campaigns, and by failing to provide credible information relevant to deliberations. Conclusions This study suggests that misalignment of stakeholder expectations remains an issue even for a well-regarded health technology assessment process that has promoted patient engagement since its inception. Support for the technical capacity of patient groups to participate in health technology assessment is necessary but not sufficient to address this issue fully. There is a fundamental tension between the evidence-based nature of health technology assessment and the experientially oriented culture of patient advocacy. Divergent notions of what constitutes evidence and how it should be used must also be addressed.

NIST biometric evaluations and developments

NASA Astrophysics Data System (ADS)

Garris, Michael D.; Wilson, Charles L.

2005-05-01

This paper presents an R&D framework used by the National Institute of Standards and Technology (NIST) for biometric technology testing and evaluation. The focus of this paper is on fingerprint-based verification and identification. Since 9-11 the NIST Image Group has been mandated by Congress to run a program for biometric technology assessment and biometric systems certification. Four essential areas of activity are discussed: 1) developing test datasets, 2) conducting performance assessment; 3) technology development; and 4) standards participation. A description of activities and accomplishments are provided for each of these areas. In the process, methods of performance testing are described and results from specific biometric technology evaluations are presented. This framework is anticipated to have broad applicability to other technology and application domains.

Health technology funding decision-making processes around the world: the same, yet different.

PubMed

Stafinski, Tania; Menon, Devidas; Philippon, Donald J; McCabe, Christopher

2011-06-01

All healthcare systems routinely make resource allocation decisions that trade off potential health gains to different patient populations. However, when such trade-offs relate to the introduction of new, promising health technologies, perceived 'winners' and 'losers' are more apparent. In recent years, public scrutiny over such decisions has intensified, raising the need to better understand how they are currently made and how they might be improved. The objective of this paper is to critically review and compare current processes for making health technology funding decisions at the regional, state/provincial and national level in 20 countries. A comprehensive search for published, peer-reviewed and grey literature describing actual national, state/provincial and regional/institutional technology decision-making processes was conducted. Information was extracted by two independent reviewers and tabulated to facilitate qualitative comparative analyses. To identify strengths and weaknesses of processes identified, websites of corresponding organizations were searched for commissioned reviews/evaluations, which were subsequently analysed using standard qualitative methods. A total of 21 national, four provincial/state and six regional/institutional-level processes were found. Although information on each one varied, they could be grouped into four sequential categories: (i) identification of the decision problem; (ii) information inputs; (iii) elements of the decision-making process; and (iv) public accountability and decision implementation. While information requirements of all processes appeared substantial and decision-making factors comprehensive, the way in which they were utilized was often unclear, as were approaches used to incorporate social values or equity arguments into decisions. A comprehensive inventory of approaches to implementing the four main components of all technology funding decision-making processes was compiled, from which areas for future work or research aimed at improving the acceptability of decisions were identified. They include the explication of decision criteria and social values underpinning processes.

Task Group on a Culture of Savings: Implementing Behavior Change in DoD

DTIC Science & Technology

2011-01-01

Robert Hale Task Group Chairman – Navy Future Personnel and Pay Solution (FPPS) - Business Case November 30, 2009 – Case for Shared Services in the...Public Sector - Accenture Shared Services in Government - AT Kearney – 2009 Global Shared Services Survey Results - Deloitte – Shared Services - a...Benchmark Study - The Johnson Group – Economics of Business Process Outsourcing - Technology Association of Georgia – State of Shared Services and Business

MIT Laboratory for Computer Science Progress Report 20 - July 1982 - Jun 1983,

DTIC Science & Technology

1984-07-01

system by the Programming Technology Group. Research in the second and largest area entitled Machines, Languages , and Systems, strives to discover and...utilization and cost effectiveness . For example, the Programming Methodology Group and the Real Time Systems Group are developing languages and...100 Megabits per second when implemented with the 1.2[im. n- well cMOS process. 3. LANGUAGES 3.1. Demand Driven Evaluation In his engineer’s thesis

Overview of MSFC's Applied Fluid Dynamics Analysis Group Activities

NASA Technical Reports Server (NTRS)

Garcia, Roberto; Griffin, Lisa; Williams, Robert

2002-01-01

This viewgraph report presents an overview of activities and accomplishments of NASA's Marshall Space Flight Center's Applied Fluid Dynamics Analysis Group. Expertise in this group focuses on high-fidelity fluids design and analysis with application to space shuttle propulsion and next generation launch technologies. Topics covered include: computational fluid dynamics research and goals, turbomachinery research and activities, nozzle research and activities, combustion devices, engine systems, MDA development and CFD process improvements.

STEM learning on electricity using arduino-phet based experiment to improve 8th grade students’ STEM literacy

NASA Astrophysics Data System (ADS)

Prima, E. C.; Oktaviani, T. D.; Sholihin, H.

2018-05-01

Technology is the application of scientific knowledge for practical purposes, especially in industry. One way to support the development of the technology is by integrating the use of technology and build the technology with the learning process in the form of STEM (science, technology, engineering, mathematics) Learning approach. Applying STEM Learning could improve Students’ STEM Literacy. The learning approach is applied in every aspect of Learning including the application of STEM Learning in the lesson plan and worksheet. The method used in this research is weak experimental method. One group class (N=15) is taken and learn using STEM Learning approach. The topic choosen is the electricity topic which is separated into electrical circuit and parameters. The learning process is separated into 3 meetings. 15 Students are given a STEM Literacy test item before and after the lesson. The result of the normalized gain shows there are improvement in students’ STEM Literacy by < \\overline{g}> 0.16 categorieed as low improvement. The most higher improvement is the students’ technology literacy, because students learn using the same technology in every meeting. This factor influences students’ technology literacy so the result is higher than another.

Silicon microelectronic field-emissive devices for advanced display technology

NASA Astrophysics Data System (ADS)

Morse, J. D.

1993-03-01

Field-emission displays (FED's) offer the potential advantages of high luminous efficiency, low power consumption, and low cost compared to AMLCD or CRT technologies. An LLNL team has developed silicon-point field emitters for vacuum triode structures and has also used thin-film processing techniques to demonstrate planar edge-emitter configurations. LLNL is interested in contributing its experience in this and other FED-related technologies to collaborations for commercial FED development. At LLNL, FED development is supported by computational capabilities in charge transport and surface/interface modeling in order to develop smaller, low-work-function field emitters using a variety of materials and coatings. Thin-film processing, microfabrication, and diagnostic/test labs permit experimental exploration of emitter and resistor structures. High field standoff technology is an area of long-standing expertise that guides development of low-cost spacers for FEDS. Vacuum sealing facilities are available to complete the FED production engineering process. Drivers constitute a significant fraction of the cost of any flat-panel display. LLNL has an advanced packaging group that can provide chip-on-glass technologies and three-dimensional interconnect generation permitting driver placement on either the front or the back of the display substrate.

Guiding the process of health technology disinvestment.

PubMed

Ibargoyen-Roteta, Nora; Gutiérrez-Ibarluzea, Iñaki; Asua, José

2010-12-01

To develop a guideline for health technology disinvestment. The Nominal Group Technique was used to determine relevant aspects of disinvestment decision-making. Ideas reaching consensus and previous Spanish guidelines on the acquisition of new health technologies (GANT) and new genetic tests (GEN) structures were used to develop the domains and contents of GuNFT (Guideline for Not Funding Health Technologies). The draft was peer reviewed by local and international experts and their suggestions were incorporated to the first GuNFT version. Thirty-five ideas reached consensus. The most relevant ones referred to the reasons for disinvesting in a technology and the key aspects that would facilitate disinvestment acceptance. Considering both consensus ideas and GANT and GEN guidelines, the first GuNFT draft was elaborated. After the review process, section numbers and contents were changed. The resulting GuNFT guideline was finally divided into six domains related to: (1) general preliminary recommendations, (2) completing the application form, (3) checking and prioritising applications, (4) assessment, (5) final decision and (6) action plan design. A software was also developed to facilitate GuNFT implementation. Disinvestment should be a guided process. Accordingly, we present the first guideline for that purpose. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Unawareness to Production, Dropout to Innovator--Primary Teachers' Understanding and Use of a Science, Technology and Society Approach to Science Teaching

ERIC Educational Resources Information Center

Rollnick, Marissa; Dlamini, Betty T.; Bradley, John

2015-01-01

This paper investigates the process of teacher change in a group of 8 primary school teachers during their exposure to a science, technology and society (STS) approach to teaching Science in Swaziland. The research aimed to establish the effect of support given to teachers in using the approach through a series of workshops, followed by a 5-week…

Exploring nurses' reactions to a novel technology to support acute health care delivery.

PubMed

Kent, Bridie; Redley, Bernice; Wickramasinghe, Nilmini; Nguyen, Lemai; Taylor, Nyree J; Moghimi, Hoda; Botti, Mari

2015-08-01

To explore nurses' reactions to new novel technology for acute health care. Past failures of technology developers to deliver products that meet nurses' needs have led to resistance and reluctance in the technology adoption process. Thus, involving nurses in a collaborative process from early conceptualisation serves to inform design reflective upon current clinical practice, facilitating the cementing of 'vision' and expectations of the technology. An exploratory descriptive design to capture nurses' immediate impressions. Four focus groups (52 nurses from medical and surgical wards at two hospitals in Australia; one private and one public). Nursing reactions towards the new technology illustrated a variance in barrier and enabler comments across multiple domains of the Theoretical Domains Framework. Most challenging for nurses were the perceived threat to their clinical skill, and the potential capability of the novel technology to capture their clinical workflow. Enabling reactions included visions that this could help integrate care between departments; help management and support of nursing processes; and coordinating their patients care between clinicians. Nurses' reactions differed across hospital sites, influenced by their experiences of using technology. For example, Site 1 nurses reported wide variability in their distribution of barrier and enabling comments and nurses at Site 2, where technology was prevalent, reported mostly positive responses. This early involvement offered nursing input and facilitated understanding of the potential capabilities of novel technology to support nursing work, particularly the characteristics seen as potentially beneficial (enabling technology) and those conflicting (barrier technology) with the delivery of both safe and effective patient care. Collaborative involvement of nurses from the early conceptualisation of technology development brings benefits that increase the likelihood of successful use of a tool intended to support the delivery of safe and efficient patient care. © 2015 John Wiley & Sons Ltd.

The process group approach to reliable distributed computing

NASA Technical Reports Server (NTRS)

Birman, Kenneth P.

1991-01-01

The difficulty of developing reliable distributed software is an impediment to applying distributed computing technology in many settings. Experience with the ISIS system suggests that a structured approach based on virtually synchronous process groups yields systems which are substantially easier to develop, fault-tolerance, and self-managing. Six years of research on ISIS are reviewed, describing the model, the types of applications to which ISIS was applied, and some of the reasoning that underlies a recent effort to redesign and reimplement ISIS as a much smaller, lightweight system.

Computer-mediated interdisciplinary teams: theory and reality.

PubMed

Vroman, Kerryellen; Kovacich, Joann

2002-05-01

The benefit of experience, tempered with the wisdom of hindsight and 5 years of text-based, asynchronous, computer-mediated, interdisciplinary team communications, provides the energy, insights and data shared in this article. Through the theoretical lens of group dynamics and the epistemology of interdisciplinary teaming, we analyze the interactions of a virtual interdisciplinary team to provide an understanding and appreciation of collaborative interdisciplinary communication in the context of interactive technologies. Whilst interactive technologies may require new patterns of language similar to that of learning a foreign language, what is communicated in the interdisciplinary team process does not change. Most important is the recognition that virtual teams, similar to their face-to-face counterparts, undergo the same challenges of interdisciplinary teaming and group developmental processes of formation: forming, storming, norming, performing, and transforming. After examining these dynamics of communication and collaboration in the context of the virtual team, the article concludes with guidelines facilitating interdisciplinary team computer-mediated communication.

Issues and challenges of involving users in medical device development.

PubMed

Bridgelal Ram, Mala; Grocott, Patricia R; Weir, Heather C M

2008-03-01

User engagement has become a central tenet of health-care policy. This paper reports on a case study in progress that highlights user engagement in the research process in relation to medical device development. To work with a specific group of medical device users to uncover unmet needs, translating these into design concepts, novel technologies and products. To validate a knowledge transfer model that may be replicated for a range of medical device applications and user groups. In depth qualitative case study to elicit and analyse user needs. The focus is on identifying design concepts for medical device applications from unmet needs, and validating these in an iterative feedback loop to the users. The case study has highlighted three interrelated challenges: ensuring unmet needs drive new design concepts and technology development; managing user expectations and managing the research process. Despite the challenges, active participation of users is crucial to developing usable and clinically effective devices.

Learner Views about Cooperative Learning in Social Learning Networks

ERIC Educational Resources Information Center

Cankaya, Serkan; Yunkul, Eyup

2018-01-01

The purpose of this study was to reveal the attitudes and views of university students about the use of Edmodo as a cooperative learning environment. In the research process, the students were divided into groups of 4 or 5 within the scope of a course given in the department of Computer Education and Instructional Technology. For each group,…

Next Generation Astronomical Data Processing using Big Data Technologies from the Apache Software Foundation

NASA Astrophysics Data System (ADS)

Mattmann, Chris

2014-04-01

In this era of exascale instruments for astronomy we must naturally develop next generation capabilities for the unprecedented data volume and velocity that will arrive due to the veracity of these ground-based sensor and observatories. Integrating scientific algorithms stewarded by scientific groups unobtrusively and rapidly; intelligently selecting data movement technologies; making use of cloud computing for storage and processing; and automatically extracting text and metadata and science from any type of file are all needed capabilities in this exciting time. Our group at NASA JPL has promoted the use of open source data management technologies available from the Apache Software Foundation (ASF) in pursuit of constructing next generation data management and processing systems for astronomical instruments including the Expanded Very Large Array (EVLA) in Socorro, NM and the Atacama Large Milimetre/Sub Milimetre Array (ALMA); as well as for the KAT-7 project led by SKA South Africa as a precursor to the full MeerKAT telescope. In addition we are funded currently by the National Science Foundation in the US to work with MIT Haystack Observatory and the University of Cambridge in the UK to construct a Radio Array of Portable Interferometric Devices (RAPID) that will undoubtedly draw from the rich technology advances underway. NASA JPL is investing in a strategic initiative for Big Data that is pulling in these capabilities and technologies for astronomical instruments and also for Earth science remote sensing. In this talk I will describe the above collaborative efforts underway and point to solutions in open source from the Apache Software Foundation that can be deployed and used today and that are already bringing our teams and projects benefits. I will describe how others can take advantage of our experience and point towards future application and contribution of these tools.

FIELD TESTING & OPTIMIZATION OF CO2/SAND FRACTURING TECHNOLOGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond L. Mazza

2004-11-30

These contract efforts involved the demonstration of a unique liquid free stimulation technology which was, at the beginning of these efforts, in 1993 unavailable in the US. The process had been developed, and patented in Canada in 1981, and held promise for stimulating liquid sensitive reservoirs in the US. The technology differs from that conventionally used in that liquid carbon dioxide (CO{sub 2}), instead of water is the base fluid. The CO{sub 2} is pumped as a liquid and then vaporizes at reservoir conditions, and because no other liquids or chemicals are used, a liquid free fracture is created. Themore » process requires a specialized closed system blender to mix the liquid CO{sub 2} with proppant under pressure. These efforts were funded to consist of up to 21 cost-shared stimulation events. Because of the vagaries of CO{sub 2} supplies, service company support and operator interest only 19 stimulation events were performed in Montana, New Mexico, and Texas. Final reports have been prepared for each of the four demonstration groups, and the specifics of those demonstrations are summarized. A summary of the demonstrations of a novel liquid-free stimulation process which was performed in four groups of ''Candidate Wells'' situated in Crockett Co., TX; San Juan Co., NM; Phillips Co., MT; and Blaine Co., MT. The stimulation process which employs CO{sub 2} as the working fluid and the production responses were compared with those from wells treated with conventional stimulation technologies, primarily N{sub 2} foam, excepting those in Blaine Co., MT where the reservoir pressure is too low to clean up spent stimulation liquids. A total of 19 liquid-free CO{sub 2}/sand stimulations were performed in 16 wells and the production improvements were generally uneconomic.« less

An integrative review of communication between parents and nurses of hospitalized technology-dependent children.

PubMed

Giambra, Barbara K; Stiffler, Deborah; Broome, Marion E

2014-12-01

With advances in health care, the population of children who are technology-dependent is increasing and, therefore, the need for nurses to understand how best to engage in communication with the parents of these children is critical. Shared communication between the parents of hospitalized technology-dependent children and their nurses is essential to provide optimal care for the child. The components and behaviors of the parent-nurse communication process that improve mutual understanding of optimal care for the child had not previously been examined. Among parents of hospitalized technology-dependent children and their nurses, what communication behaviors, components, concepts, or processes improve mutual understanding of optimal care for the child? An integrative review of both qualitative and quantitative studies was conducted. Key words including communication, hospitalized, nurse, parent, pediatric, and technology-dependent were used to search databases such as Cumulative Index to Nursing and Allied Health and Medline for years 2000-2014. The data regarding the process of parent-nurse communication were extracted as they related to the mutual understanding of optimal care for the child. The data were grouped into themes and compared across studies, designs, populations, and settings. Six articles were identified that provided information regarding the processes of shared communication among the parents of hospitalized technology-dependent children and their nurses. Providing clear information, involving parents in care decisions, trust and respect for each other's expertise, caring attitudes, advocacy, and role negotiation were all found to be important factors in shared parent-nurse communication. The results of this integrative review inform our understanding of the parent-nurse communication process. The findings provide nurses with an understanding of strategies to better engage in respectful, engaging, and intentional communication with parents of hospitalized technology-dependent children and improve patient outcomes. © 2014 Sigma Theta Tau International.

Applications of aerospace technology

NASA Technical Reports Server (NTRS)

Rouse, Doris J.

1984-01-01

The objective of the Research Triangle Institute Technology Transfer Team is to assist NASA in achieving widespread utilization of aerospace technology in terrestrial applications. Widespread utilization implies that the application of NASA technology is to benefit a significant sector of the economy and population of the Nation. This objective is best attained by stimulating the introduction of new or improved commercially available devices incorporating aerospace technology. A methodology is presented for the team's activities as an active transfer agent linking NASA Field Centers, industry associations, user groups, and the medical community. This methodology is designed to: (1) identify priority technology requirements in industry and medicine, (2) identify applicable NASA technology that represents an opportunity for a successful solution and commercial product, (3) obtain the early participation of industry in the transfer process, and (4) successfully develop a new product based on NASA technology.

A Cluster Randomized Controlled Trial on the Effects of Technology-aided Testing and Feedback on Physical Activity and Biological Age Among Employees in a Medium-sized Enterprise.

PubMed

Liukkonen, Mika; Nygård, Clas-Håkan; Laukkanen, Raija

2017-12-01

It has been suggested that engaging technology can empower individuals to be more proactive about their health and reduce their health risks. The aim of the present intervention was to study the effects of technology-aided testing and feedback on physical activity and biological age of employees in a middle-sized enterprise. In all, 121 employees (mean age 42 ± 10 years) participated in the 12-month three-arm cluster randomized trial. The fitness measurement process (Body Age) determined the participants' biological age in years. Physical activity was measured with the International Physical Activity Questionnaire Short Form. Physical activity did not change during the intervention. Biological age (better fitness) improved in all groups statistically significantly ( p  < 0.001), but with no interaction effects. The mean changes (years) in the groups were -2.20 for the controls, -2.83 for the group receiving their biological age and feedback, and -2.31 for the group receiving their biological age, feedback, and a training computer. Technology-aided testing with feedback does not seem to change the amount of physical activity but may enhance physical fitness measured by biological age.

Case study: technology initiative led to advanced lead optimization screening processes at Bristol-Myers Squibb, 2004-2009.

PubMed

Zhang, Litao; Cvijic, Mary Ellen; Lippy, Jonathan; Myslik, James; Brenner, Stephen L; Binnie, Alastair; Houston, John G

2012-07-01

In this paper, we review the key solutions that enabled evolution of the lead optimization screening support process at Bristol-Myers Squibb (BMS) between 2004 and 2009. During this time, technology infrastructure investment and scientific expertise integration laid the foundations to build and tailor lead optimization screening support models across all therapeutic groups at BMS. Together, harnessing advanced screening technology platforms and expanding panel screening strategy led to a paradigm shift at BMS in supporting lead optimization screening capability. Parallel SAR and structure liability relationship (SLR) screening approaches were first and broadly introduced to empower more-rapid and -informed decisions about chemical synthesis strategy and to broaden options for identifying high-quality drug candidates during lead optimization. Copyright © 2012 Elsevier Ltd. All rights reserved.

Real-time SHVC software decoding with multi-threaded parallel processing

NASA Astrophysics Data System (ADS)

Gudumasu, Srinivas; He, Yuwen; Ye, Yan; He, Yong; Ryu, Eun-Seok; Dong, Jie; Xiu, Xiaoyu

2014-09-01

This paper proposes a parallel decoding framework for scalable HEVC (SHVC). Various optimization technologies are implemented on the basis of SHVC reference software SHM-2.0 to achieve real-time decoding speed for the two layer spatial scalability configuration. SHVC decoder complexity is analyzed with profiling information. The decoding process at each layer and the up-sampling process are designed in parallel and scheduled by a high level application task manager. Within each layer, multi-threaded decoding is applied to accelerate the layer decoding speed. Entropy decoding, reconstruction, and in-loop processing are pipeline designed with multiple threads based on groups of coding tree units (CTU). A group of CTUs is treated as a processing unit in each pipeline stage to achieve a better trade-off between parallelism and synchronization. Motion compensation, inverse quantization, and inverse transform modules are further optimized with SSE4 SIMD instructions. Simulations on a desktop with an Intel i7 processor 2600 running at 3.4 GHz show that the parallel SHVC software decoder is able to decode 1080p spatial 2x at up to 60 fps (frames per second) and 1080p spatial 1.5x at up to 50 fps for those bitstreams generated with SHVC common test conditions in the JCT-VC standardization group. The decoding performance at various bitrates with different optimization technologies and different numbers of threads are compared in terms of decoding speed and resource usage, including processor and memory.

Selecting appropriate wastewater treatment technologies using a choosing-by-advantages approach.

PubMed

Arroyo, Paz; Molinos-Senante, María

2018-06-01

Selecting the most sustainable wastewater treatment (WWT) technology among possible alternatives is a very complex task because the choice must integrate economic, environmental, and social criteria. Traditionally, several multi-criteria decision-making approaches have been applied, with the most often used being the analytical hierarchical process (AHP). However, AHP allows users to offset poor environmental and/or social performance with low cost. To overcome this limitation, our study examines a choosing-by-advantages (CBA) approach to rank seven WWT technologies for secondary WWT. CBA results were compared with results obtained by using the AHP approach. The rankings of WWT alternatives differed, depending on whether the CBA or AHP approach was used, which highlights the importance of the method used to support decision-making processes, particularly ones that rely on subjective interpretations by experts. This paper uses a holistic perspective to demonstrate the benefits of using the CBA approach to support a decision-making process when a group of experts must come to a consensus in selecting the most suitable WWT technology among several available. Copyright © 2017 Elsevier B.V. All rights reserved.

Emerging CFD technologies and aerospace vehicle design

NASA Technical Reports Server (NTRS)

Aftosmis, Michael J.

1995-01-01

With the recent focus on the needs of design and applications CFD, research groups have begun to address the traditional bottlenecks of grid generation and surface modeling. Now, a host of emerging technologies promise to shortcut or dramatically simplify the simulation process. This paper discusses the current status of these emerging technologies. It will argue that some tools are already available which can have positive impact on portions of the design cycle. However, in most cases, these tools need to be integrated into specific engineering systems and process cycles to be used effectively. The rapidly maturing status of unstructured and Cartesian approaches for inviscid simulations makes suggests the possibility of highly automated Euler-boundary layer simulations with application to loads estimation and even preliminary design. Similarly, technology is available to link block structured mesh generation algorithms with topology libraries to avoid tedious re-meshing of topologically similar configurations. Work in algorithmic based auto-blocking suggests that domain decomposition and point placement operations in multi-block mesh generation may be properly posed as problems in Computational Geometry, and following this approach may lead to robust algorithmic processes for automatic mesh generation.

Patient-centered applications: use of information technology to promote disease management and wellness. A white paper by the AMIA knowledge in motion working group.

PubMed

Demiris, George; Afrin, Lawrence B; Speedie, Stuart; Courtney, Karen L; Sondhi, Manu; Vimarlund, Vivian; Lovis, Christian; Goossen, William; Lynch, Cecil

2008-01-01

Advances in information technology (IT) enable a fundamental redesign of health care processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to patient-centric applications. This white paper defines key principles and challenges for designers, policy makers, and evaluators of patient-centered technologies for disease management and prevention. It reviews current and emerging trends; highlights challenges related to design, evaluation, reimbursement and usability; and reaches conclusions for next steps that will advance the domain.

Patient-centered Applications: Use of Information Technology to Promote Disease Management and Wellness. A White Paper by the AMIA Knowledge in Motion Working Group

PubMed Central

Demiris, George; Afrin, Lawrence B.; Speedie, Stuart; Courtney, Karen L.; Sondhi, Manu; Vimarlund, Vivian; Lovis, Christian; Goossen, William; Lynch, Cecil

2008-01-01

Advances in information technology (IT) enable a fundamental redesign of health care processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to patient-centric applications. This white paper defines key principles and challenges for designers, policy makers, and evaluators of patient-centered technologies for disease management and prevention. It reviews current and emerging trends; highlights challenges related to design, evaluation, reimbursement and usability; and reaches conclusions for next steps that will advance the domain. PMID:17947617

The perceived familiarity gap hypothesis: examining how media attention and reflective integration relate to perceived familiarity with nanotechnology in Singapore

NASA Astrophysics Data System (ADS)

Lee, Edmund W. J.; Ho, Shirley S.

2015-05-01

Public level of familiarity with nanotechnology partly determines their acceptance or rejection of the technology. This study examines the differential influence of public attention to science news in the media and reflective integration on perceived familiarity with nanotechnology among people in the higher and lower socioeconomic status (SES) groups in Singapore. Significant three-way interactions among education, science news attention, and reflective integration variables were found. Attention to television science news narrowed the level of perceived familiarity with nanotechnology between the higher and lower SES groups for those who engaged in high elaborative processing. Science newspaper attention, on the other hand, widened the familiarity gap between the higher and lower SES groups among those who engaged in high elaborative processing. Two-way interaction among education and elaborative processing were found—elaborative processing closed the familiarity gap between higher and lower SES groups. Theoretical and practical implications were discussed.

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

NASA Astrophysics Data System (ADS)

Niño, Ely Dannier V.

2013-11-01

These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for making possible this international meeting of researchers. It should be noted that the event organized by UIS and UPB universities, through their research groups FITEK and GINTEP, was a very significant contribution to the national and international scientific community, achieving the interaction of different research groups from academia and business sector. On behalf of the research groups GINTEP - UPB and FITEK - UIS, we greatly appreciate the support provided by the Sponsors, who allowed to continue with the dream of research. Ely Dannier V-Nitilde no The Editor The PDF file also contains a list of committees and sponsors.

Flattening filter-free accelerators: a report from the AAPM Therapy Emerging Technology Assessment Work Group.

PubMed

Xiao, Ying; Kry, Stephen F; Popple, Richard; Yorke, Ellen; Papanikolaou, Niko; Stathakis, Sotirios; Xia, Ping; Huq, Saiful; Bayouth, John; Galvin, James; Yin, Fang-Fang

2015-05-08

This report describes the current state of flattening filter-free (FFF) radiotherapy beams implemented on conventional linear accelerators, and is aimed primarily at practicing medical physicists. The Therapy Emerging Technology Assessment Work Group of the American Association of Physicists in Medicine (AAPM) formed a writing group to assess FFF technology. The published literature on FFF technology was reviewed, along with technical specifications provided by vendors. Based on this information, supplemented by the clinical experience of the group members, consensus guidelines and recommendations for implementation of FFF technology were developed. Areas in need of further investigation were identified. Removing the flattening filter increases beam intensity, especially near the central axis. Increased intensity reduces treatment time, especially for high-dose stereotactic radiotherapy/radiosurgery (SRT/SRS). Furthermore, removing the flattening filter reduces out-of-field dose and improves beam modeling accuracy. FFF beams are advantageous for small field (e.g., SRS) treatments and are appropriate for intensity-modulated radiotherapy (IMRT). For conventional 3D radiotherapy of large targets, FFF beams may be disadvantageous compared to flattened beams because of the heterogeneity of FFF beam across the target (unless modulation is employed). For any application, the nonflat beam characteristics and substantially higher dose rates require consideration during the commissioning and quality assurance processes relative to flattened beams, and the appropriate clinical use of the technology needs to be identified. Consideration also needs to be given to these unique characteristics when undertaking facility planning. Several areas still warrant further research and development. Recommendations pertinent to FFF technology, including acceptance testing, commissioning, quality assurance, radiation safety, and facility planning, are presented. Examples of clinical applications are provided. Several of the areas in which future research and development are needed are also indicated.

The Effect of Guided-Inquiry Instruction on 6th Grade Turkish Students' Achievement, Science Process Skills, and Attitudes toward Science

ERIC Educational Resources Information Center

Koksal, Ela Ayse; Berberoglu, Giray

2014-01-01

The purpose of this study is to investigate the effectiveness of guided-inquiry approach in science classes over existing science and technology curriculum in developing content-based science achievement, science process skills, and attitude toward science of grade level 6 students in Turkey. Non-equivalent control group quasi-experimental design…

Towards Effective Group Work Assessment: Even What You Don't See Can Bias You

ERIC Educational Resources Information Center

Gweon, Gahgene; Jun, Soojin; Finger, Susan; Rosé, Carolyn Penstein

2017-01-01

In project-based learning (PBL) courses, which are common in design and technology education, instructors regard both the process and the final product to be important. However, conducting an accurate assessment for process feedback is not an easy task because instructors of PBL courses often have to make judgments based on a limited view of group…

40 CFR Table 8 to Subpart U of... - Summary of Compliance Alternative Requirements for the Back-End Process Provisions

Code of Federal Regulations, 2011 CFR

2011-07-01

... Requirements for the Back-End Process Provisions 8 Table 8 to Subpart U of Part 63 Protection of Environment...: Group I Polymers and Resins Pt. 63, Subpt. U, Table 8 Table 8 to Subpart U of Part 63—Summary of... be monitored Requirements Compliance Using Stripping Technology, Demonstrated through Periodic...

40 CFR Table 8 to Subpart U of... - Summary of Compliance Alternative Requirements for the Back-End Process Provisions

Code of Federal Regulations, 2010 CFR

2010-07-01

... Requirements for the Back-End Process Provisions 8 Table 8 to Subpart U of Part 63 Protection of Environment...: Group I Polymers and Resins Pt. 63, Subpt. U, Table 8 Table 8 to Subpart U of Part 63—Summary of... be monitored Requirements Compliance Using Stripping Technology, Demonstrated through Periodic...

40 CFR Table 8 to Subpart U of... - Summary of Compliance Alternative Requirements for the Back-End Process Provisions

Code of Federal Regulations, 2014 CFR

2014-07-01

... Requirements for the Back-End Process Provisions 8 Table 8 to Subpart U of Part 63 Protection of Environment...: Group I Polymers and Resins Pt. 63, Subpt. U, Table 8 Table 8 to Subpart U of Part 63—Summary of... be monitored Requirements Compliance Using Stripping Technology, Demonstrated through Periodic...

40 CFR Table 8 to Subpart U of... - Summary of Compliance Alternative Requirements for the Back-End Process Provisions

Code of Federal Regulations, 2012 CFR

2012-07-01

... Requirements for the Back-End Process Provisions 8 Table 8 to Subpart U of Part 63 Protection of Environment...: Group I Polymers and Resins Pt. 63, Subpt. U, Table 8 Table 8 to Subpart U of Part 63—Summary of... be monitored Requirements Compliance Using Stripping Technology, Demonstrated through Periodic...

40 CFR Table 8 to Subpart U of... - Summary of Compliance Alternative Requirements for the Back-End Process Provisions

Code of Federal Regulations, 2013 CFR

2013-07-01

... Requirements for the Back-End Process Provisions 8 Table 8 to Subpart U of Part 63 Protection of Environment...: Group I Polymers and Resins Pt. 63, Subpt. U, Table 8 Table 8 to Subpart U of Part 63—Summary of... be monitored Requirements Compliance Using Stripping Technology, Demonstrated through Periodic...

Making the right decisions about new technologies: a perspective on criteria and preferences in hospitals.

PubMed

Gurtner, Sebastian

2014-01-01

Decision makers in hospitals are regularly faced with choices about the adoption of new technologies. Wrong decisions lead to a waste of resources and can have serious effects on the patients' and hospital's well-being. The goal of this research was to contribute to the understanding of decision making in hospitals. This study produced insights regarding relevant decision criteria and explored their specific relevance. An initial empirical survey was used to collect the relevant criteria for technological decision making in hospitals. In total, 220 experts in the field of health technology assessment from 34 countries participated in the survey. As a second step, the abovementioned criteria were used to form the basis of an analytic hierarchy process model. A group of 115 physicians, medical technical assistants, and other staff, all of whom worked in the field of radiooncology, prioritized the criteria. An analysis of variance was performed to explore differences among groups in terms of institutional and personal categorization variables. The first part of the research revealed seven key criteria for technological decision making in hospitals. The analytic hierarchy process model revealed that organizational impact was the most important criterion, followed by budget impact. The analysis of variance indicated that there were differences in the perceptions of the importance of the identified criteria. This exploration of the criteria for technological decision making in hospitals will help decision makers consider all of the relevant aspects, leading to more structured and rational decisions. For the optimal resource allocation, all of the relevant stakeholder perspectives and local issues must be considered appropriately.

Taming hazardous chemistry in flow: the continuous processing of diazo and diazonium compounds.

PubMed

Deadman, Benjamin J; Collins, Stuart G; Maguire, Anita R

2015-02-02

The synthetic utilities of the diazo and diazonium groups are matched only by their reputation for explosive decomposition. Continuous processing technology offers new opportunities to make and use these versatile intermediates at a range of scales with improved safety over traditional batch processes. In this minireview, the state of the art in the continuous flow processing of reactive diazo and diazonium species is discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mobil cuts the alcohol out of oxygenate production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, A.

1992-04-15

Mobil Corp. has unveiled a new etherification technology that can produce fuel oxygenated based only on olefinic refinery streams and water. The process has the potential to allow refiners to produce oxygenates without having to rely on an external supply of alcohols such as methanol or ethanol. Mobil has developed the technology around a new oxygenate, disopropyl ether (DIPE), based on propylene. However, the process has also been tested using mixed propylene/C{sub 4} and straight C{sub 4} streams, says Michael J. McNally, manager of Mobil`s Motor Gasoline Group (Paulsboro, NJ), producing ethers analogous to methyl tert-butyl ether (MTBE).

Fair Oaks Dairy Farms Cellulosic Ethanol Technology Review Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrew Wold; Robert Divers

2011-06-23

At Fair Oaks Dairy, dried manure solids (''DMS'') are currently used as a low value compost. United Power was engaged to evaluate the feasibility of processing these DMS into ethanol utilizing commercially available cellulosic biofuels conversion platforms. The Fair Oaks Dairy group is transitioning their traditional ''manure to methane'' mesophilic anaerobic digester platform to an integrated bio-refinery centered upon thermophilic digestion. Presently, the Digested Manure Solids (DMS) are used as a low value soil amendment (compost). United Power evaluated the feasibility of processing DMS into higher value ethanol utilizing commercially available cellulosic biofuels conversion platforms. DMS was analyzed and overmore » 100 potential technology providers were reviewed and evaluated. DMS contains enough carbon to be suitable as a biomass feedstock for conversion into ethanol by gasification technology, or as part of a conversion process that would include combined heat and power. In the first process, 100% of the feedstock is converted into ethanol. In the second process, the feedstock is combusted to provide heat to generate electrical power supporting other processes. Of the 100 technology vendors evaluated, a short list of nine technology providers was developed. From this, two vendors were selected as finalists (one was an enzymatic platform and one was a gasification platform). Their selection was based upon the technical feasibility of their systems, engineering expertise, experience in commercial or pilot scale operations, the ability or willingness to integrate the system into the Fair Oaks Biorefinery, the know-how or experience in producing bio-ethanol, and a clear path to commercial development.« less

Stakeholder identification of advanced technology opportunities at international ports of entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, S.K.; Icerman, L.

As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5)more » inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.« less

The acquisition of inquiry skills and computer skills by 8th grade urban middle school students in a technology-supported environment

NASA Astrophysics Data System (ADS)

Ruffin, Monya Aisha

The evolution of increased global accessibility and dependency on computer technologies has revolutionized most aspects of everyday life, including a rapid transformation of 21st century schools. Current changes in education reflect the need for the integration of effective computer technologies in school curricula. The principal objective of this investigation was to examine the acquisition of computer skills and inquiry skills by urban eighth grade students in a technology-supported environment. The study specifically focused on students' ability to identify, understand, and work through the process of scientific inquiry, while also developing computer technology tool skills. The unique component of the study was its contextualization within a local historically significant setting---an African-American cemetery. Approximately seventy students, in a local middle school, participated in the five-week treatment. Students conducted research investigations on site and over the Internet, worked in collaborative groups, utilized technology labs, and received inquiry and computer technology instruction. A mixed method design employing quantitative and qualitative methods was used. Two pilot studies conducted in an after-school science club format helped sharpen the research question, data collection methods, and survey used in the school-based study. Complete sets of data from pre and post surveys and journals were collected from sixty students. Six students were randomly selected to participate in in-depth focus group interviews. Researcher observations and inferences were also included in the analysis. The research findings showed that, after the treatment, students: (a) acquired more inquiry skills and computer skills, (b) broadened their basic conceptual understanding and perspective about science, (c) engaged actively in a relevant learning process, (d) created tangible evidence of their inquiry skills and computer skills, and (e) recalled and retained more details about the inquiry process and the computer technology tools (when they attended at least 80% of the treatment sessions). The findings indicated that project-based, technology-supported experiences allowed students to learn content in an interdisciplinary way (building on culturally relevant local histories) and provided enjoyable learning opportunities for students and teachers. Participation in the treatment encouraged students to think beyond the technical aspects of technology and relate its relevancy and usefulness to solving scientific queries.

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program

NASA Technical Reports Server (NTRS)

Kaufman, J. W. (Editor)

1980-01-01

The purpose of the first scientific working group meeting was fourfold: (1) to identify flight test options for engineering verification of the MSFC Doppler Lidar; (2) to identify flight test options for gathering data for scientific/technology applications; (3) to identify additional support equipment needed on the CV 990 aircraft for the flight tests; and (4) to identify postflight data processing and data sets requirements. The working group identified approximately ten flight options for gathering data on atmospheric dynamics processes, including turbulence, valley breezes, and thunderstorm cloud anvil and cold air outflow dynamics. These test options will be used as a basis for planning the fiscal year 1981 tests of the Doppler Lidar system.

Nitrogen-Doped Carbon Fiber Paper by Active Screen Plasma Nitriding and Its Microwave Heating Properties.

PubMed

Zhu, Naishu; Ma, Shining; Sun, Xiaofeng

2016-12-28

In this paper, active screen plasma nitriding (ASPN) treatment was performed on polyacrylonitrile carbon fiber papers. Electric resistivity and microwave loss factor of carbon fiber were described to establish the relationship between processing parameters and fiber's ability to absorb microwaves. The surface processing effect of carbon fiber could be characterized by dynamic thermal mechanical analyzer testing on composites made of carbon fiber. When the process temperature was at 175 °C, it was conducive to obtaining good performance of dynamical mechanical properties. The treatment provided a way to change microwave heating properties of carbon fiber paper by performing different treatment conditions, such as temperature and time parameters. Atomic force microscope, scanning electron microscope, and X-ray photoelectron spectroscopy analysis showed that, during the course of ASPN treatment on carbon fiber paper, nitrogen group was introduced and silicon group was removed. The treatment of nitrogen-doped carbon fiber paper represented an alternative promising candidate for microwave curing materials used in repairing and heating technology, furthermore, an efficient dielectric layer material for radar-absorbing structure composite in metamaterial technology.

A Systems Thinking Approach to Engineering Challenges of Military Systems-of-Systems

DTIC Science & Technology

2016-09-01

UNCLASSIFIED UNCLLASIFIED A Systems Thinking Approach to Engineering Challenges of Military Systems -of- Systems Pin Chen and Mark...Unewisse Joint & Operations Analysis Division Defence Science and Technology Group DST-Group-TR-3271 ABSTRACT System (s)-of- Systems (SoS...their products and outcomes. This report introduces a systems thinking-based approach, SoS thinking, which offers a language and a thoughtful process

Replication in the Harp File System

DTIC Science & Technology

1981-07-01

Shrira Michael Williams iadly 1991 © Massachusetts Institute of Technology (To appear In the Proceedings of the Thirteenth ACM Symposium on Operating...S., Spector, A. Z., and Thompson, D. S. Distributed Logging for Transaction Processing. ACM Special Interest Group on Management of Data 1987 Annual ...System. USENIX Conference Proceedings , June, 1990, pp. 63-71. 15. Hagmann, R. Reimplementing the Cedar File System Using Logging and Group Commit

Using the Analytic Hierarchy Process (AHP) to understand the most important factors to design and evaluate a telehealth system for Parkinson's disease.

PubMed

Cancela, Jorge; Fico, Giuseppe; Arredondo Waldmeyer, Maria T

2015-01-01

The assessment of a new health technology is a multidisciplinary and multidimensional process, which requires a complex analysis and the convergence of different stakeholders into a common decision. This task is even more delicate when the assessment is carried out in early stage of development processes, when the maturity of the technology prevents conducting a large scale trials to evaluate the cost effectiveness through classic health economics methods. This lack of information may limit the future development and deployment in the clinical practice. This work aims to 1) identify the most relevant user needs of a new medical technology for managing and monitoring Parkinson's Disease (PD) patients and to 2) use these user needs for a preliminary assessment of a specific system called PERFORM, as a case study. Analytic Hierarchy Process (AHP) was used to design a hierarchy of 17 needs, grouped into 5 categories. A total of 16 experts, 6 of them with a clinical background and the remaining 10 with a technical background, were asked to rank these needs and categories. On/Off fluctuations detection, Increase wearability acceptance, and Increase self-management support have been identified as the most relevant user needs. No significant differences were found between the clinician and technical groups. These results have been used to evaluate the PERFORM system and to identify future areas of improvement. First of all, the AHP contributed to the elaboration of a unified hierarchy, integrating the needs of a variety of stakeholders, promoting the discussion and the agreement into a common framework of evaluation. Moreover, the AHP effectively supported the user need elicitation as well as the assignment of different weights and priorities to each need and, consequently, it helped to define a framework for the assessment of telehealth systems for PD management and monitoring. This framework can be used to support the decision-making process for the adoption of new technologies in PD.

Using the Analytic Hierarchy Process (AHP) to understand the most important factors to design and evaluate a telehealth system for Parkinson's disease

PubMed Central

2015-01-01

Background The assessment of a new health technology is a multidisciplinary and multidimensional process, which requires a complex analysis and the convergence of different stakeholders into a common decision. This task is even more delicate when the assessment is carried out in early stage of development processes, when the maturity of the technology prevents conducting a large scale trials to evaluate the cost effectiveness through classic health economics methods. This lack of information may limit the future development and deployment in the clinical practice. This work aims to 1) identify the most relevant user needs of a new medical technology for managing and monitoring Parkinson's Disease (PD) patients and to 2) use these user needs for a preliminary assessment of a specific system called PERFORM, as a case study. Methods Analytic Hierarchy Process (AHP) was used to design a hierarchy of 17 needs, grouped into 5 categories. A total of 16 experts, 6 of them with a clinical background and the remaining 10 with a technical background, were asked to rank these needs and categories. Results On/Off fluctuations detection, Increase wearability acceptance, and Increase self-management support have been identified as the most relevant user needs. No significant differences were found between the clinician and technical groups. These results have been used to evaluate the PERFORM system and to identify future areas of improvement. Conclusions First of all, the AHP contributed to the elaboration of a unified hierarchy, integrating the needs of a variety of stakeholders, promoting the discussion and the agreement into a common framework of evaluation. Moreover, the AHP effectively supported the user need elicitation as well as the assignment of different weights and priorities to each need and, consequently, it helped to define a framework for the assessment of telehealth systems for PD management and monitoring. This framework can be used to support the decision-making process for the adoption of new technologies in PD. PMID:26391847

The Type and Impact of Evidence Review Group Exploratory Analyses in the NICE Single Technology Appraisal Process.

PubMed

Carroll, Christopher; Kaltenthaler, Eva; Hill-McManus, Daniel; Scope, Alison; Holmes, Michael; Rice, Stephen; Rose, Micah; Tappenden, Paul; Woolacott, Nerys

2017-06-01

As part of the UK National Institute for Health and Care Excellence (NICE) single technology appraisal process, independent evidence review groups (ERGs) critically appraise a company's submission relating to a specific technology and indication. To explore the type of additional exploratory analyses conducted by ERGs and their impact on the recommendations made by NICE. The 100 most recently completed single technology appraisals with published guidance were selected for inclusion. A content analysis of relevant documents was undertaken to identify and extract relevant data, and narrative synthesis was used to rationalize and present these data. The types of exploratory analysis conducted in relation to companies' models were fixing errors, addressing violations, addressing matters of judgment, and the provision of a new, ERG-preferred base case. Ninety-three of the 100 ERG reports contained at least one of these analyses. The most frequently reported type of analysis in these 93 ERG reports related to the category "Matters of judgment," which was reported in 83 reports (89%). At least one of the exploratory analyses conducted and reported by an ERG is mentioned in 97% of NICE appraisal consultation documents and 94% of NICE final appraisal determinations, and had a clear influence on recommendations in 72% of appraisal consultation documents and 47% of final appraisal determinations. These results suggest that the additional analyses undertaken by ERGs in the appraisal of company submissions are highly influential in the policy-making and decision-making process. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

[Multi-criteria decision analysis for health technology resource allocation and assessment: so far and so near?

PubMed

Campolina, Alessandro Gonçalves; Soárez, Patrícia Coelho De; Amaral, Fábio Vieira do; Abe, Jair Minoro

2017-10-26

Multi-criteria decision analysis (MCDA) is an emerging tool that allows the integration of relevant factors for health technology assessment (HTA). This study aims to present a summary of the methodological characteristics of MCDA: definitions, approaches, applications, and implementation stages. A case study was conducted in the São Paulo State Cancer Institute (ICESP) in order to understand the perspectives of decision-makers in the process of drafting a recommendation for the incorporation of technology in the Brazilian Unified National Health System (SUS), through a report by the Brazilian National Commission for the Incorporation of Technologies in the SUS (CONITEC). Paraconsistent annotated evidential logic Eτ was the methodological approach adopted in the study, since it can serve as an underlying logic for constructs capable of synthesizing objective information (from the scientific literature) and subjective information (from experts' values and preferences in the area of knowledge). It also allows the incorporation of conflicting information (contradictions), as well as vague and even incomplete information in the valuation process, resulting from imperfection of the available scientific evidence. The method has the advantages of allowing explicit consideration of the criteria that influenced the decision, facilitating follow-up and visualization of process stages, allowing assessment of the contribution of each criterion separately, and in aggregate, to the decision's outcome, facilitating the discussion of diverging perspectives by different stakeholder groups, and increasing the understanding of the resulting recommendations. The use of an explicit MCDA approach should facilitate conflict mediation and optimize participation by different stakeholder groups.

Modelling of additive manufacturing processes: a review and classification

NASA Astrophysics Data System (ADS)

Stavropoulos, Panagiotis; Foteinopoulos, Panagis

2018-03-01

Additive manufacturing (AM) is a very promising technology; however, there are a number of open issues related to the different AM processes. The literature on modelling the existing AM processes is reviewed and classified. A categorization of the different AM processes in process groups, according to the process mechanism, has been conducted and the most important issues are stated. Suggestions are made as to which approach is more appropriate according to the key performance indicator desired to be modelled and a discussion is included as to the way that future modelling work can better contribute to improving today's AM process understanding.

A thematic analysis of the strengths and weaknesses of manufacturers' submissions to the NICE Single Technology Assessment (STA) process.

PubMed

Carroll, Christopher; Kaltenthaler, Eva; FitzGerald, Patrick; Boland, Angela; Dickson, Rumona

2011-10-01

The NICE Single Technology Appraisal (STA) process in the UK has been underway for five years. Evidence Review Groups (ERGs) critically appraise submissions from manufacturers on the clinical and cost effectiveness of new technologies. This study analysed the ERGs' assessment of the strengths and weaknesses of 30 manufacturers' submissions to the STA process. Thematic analysis was performed on the textual descriptions of the strengths and weakness of manufacturer submissions, as outlined by the ERGs in their reports. Various themes emerged from the data. These themes related to the processes applied in the submissions; the content of the submission (e.g. the amount and quality of evidence); the reporting of the submissions' review and analysis processes; the reliability and validity of the submissions' findings; and how far the submission had satisfied the STA process objectives. STA submissions could be improved if attention were paid to transparency in the reporting, conduct and justification of review and modelling processes and analyses, as well as greater robustness in the choice of data and closer adherence to the scope or decision problem. Where this adherence is not possible, more detailed justification of the choice of evidence or data is required. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Social and personal normative influences on healthcare professionals to use information technology: Towards a more robust social ergonomics

PubMed Central

Holden, Richard J

2011-01-01

Social structures and processes are increasingly acknowledged and studied within the human factors/ergonomics (HFE) discipline. At the same time, social phenomena are rarely the focus of HFE work, leaving a knowledge gap. The present study directly addresses social and personal normative forces that influence technology use and performance. Social and personal normative influence to use electronic health records (EHR) were investigated using semi-structured qualitative interviews with 20 attending physicians at two US hospitals. Analyses used a comprehensive framework based on leading social scientific theories and revealed numerous sources of influence, including hospital administration, colleagues, patients, clinical and professional groups, government, and one’s self. Influence was achieved through different means and invoked different psychological processes. Findings motivate a new view of professionals’ technology use as a highly social process occurring in a social context, with implications for research, policy, design, and in general the development of a robust social ergonomics. PMID:23066349

Social and personal normative influences on healthcare professionals to use information technology: Towards a more robust social ergonomics.

PubMed

Holden, Richard J

2012-09-01

Social structures and processes are increasingly acknowledged and studied within the human factors/ergonomics (HFE) discipline. At the same time, social phenomena are rarely the focus of HFE work, leaving a knowledge gap. The present study directly addresses social and personal normative forces that influence technology use and performance. Social and personal normative influence to use electronic health records (EHR) were investigated using semi-structured qualitative interviews with 20 attending physicians at two US hospitals. Analyses used a comprehensive framework based on leading social scientific theories and revealed numerous sources of influence, including hospital administration, colleagues, patients, clinical and professional groups, government, and one's self. Influence was achieved through different means and invoked different psychological processes. Findings motivate a new view of professionals' technology use as a highly social process occurring in a social context, with implications for research, policy, design, and in general the development of a robust social ergonomics.

Real time diffuse reflectance polarisation spectroscopy imaging to evaluate skin microcirculation

NASA Astrophysics Data System (ADS)

O'Doherty, Jim; Henricson, Joakim; Nilsson, Gert E.; Anderson, Chris; Leahy, Martin J.

2007-07-01

This article describes the theoretical development and design of a real-time microcirculation imaging system, an extension from a previously technology developed by our group. The technology utilises polarisation spectroscopy, a technique used in order to selectively gate photons returning from various compartments of human skin tissue, namely from the superficial layers of the epidermis, and the deeper backscattered light from the dermal matrix. A consumer-end digital camcorder captures colour data with three individual CCDs, and a custom designed light source consisting of a 24 LED ring light provides broadband illumination over the 400 nm - 700 nm wavelength region. Theory developed leads to an image processing algorithm, the output of which scales linearly with increasing red blood cell (RBC) concentration. Processed images are displayed online in real-time at a rate of 25 frames s -1, at a frame size of 256 x 256 pixels, and is limited only by computer RAM memory and processing speed. General demonstrations of the technique in vivo display several advantages over similar technology.

Industrial platforms--a unique feature of the European Commission's biotechnology R&D programme.

PubMed

Aguilar, A; Ingemansson, T; Hogan, S; Magnien, E

1998-09-01

The European Commission's research, technological development and demonstration programmes aim to strengthen European research and technological development, and to increase the competitiveness of European industries. The creation and development of Industrial Platforms play an important role in these processes by improving the transition from research to commercial application. Industrial Platforms are technology-based industrial groupings established by industry with the aims of enabling the exploitation or dissemination of research results, encouraging academic-industrial collaborations and providing their members with a means of voicing their opinion on present and future research policies.

Achieving a competitive advantage through referral management.

PubMed

D'Amaro, R; Thomas, C S

1989-01-01

The physician remains the primary referral source in medical service. Referral patterns, in turn, reflect interactions between referring physicians and consultants which relate to quality of care, costs, and personal factors such as age and common training. Referrals initiated by patients relate to the desire to seek a second opinion and are heavily influenced by other family members. Alterations in the referral process are emerging due to cost escalation, the emergence of large payor groupings and aggregation of physicians into larger group settings. Strategies to manage the referral process include enhanced communications using new telecommunication technology and joint ventures with hospitals.

Innovative medical devices and hospital decision making: a study comparing the views of hospital pharmacists and physicians.

PubMed

Billaux, Mathilde; Borget, Isabelle; Prognon, Patrice; Pineau, Judith; Martelli, Nicolas

2016-06-01

Objectives Many university hospitals have developed local health technology assessment processes to guide informed decisions about new medical devices. However, little is known about stakeholders' perceptions and assessment of innovative devices. Herein, we investigated the perceptions regarding innovative medical devices of their chief users (physicians and surgeons), as well as those of hospital pharmacists, because they are responsible for the purchase and management of sterile medical devices. We noted the evaluation criteria used to assess and select new medical devices and suggestions for improving local health technology assessment processes indicated by the interviewees. Methods We randomly selected 18 physicians and surgeons (nine each) and 18 hospital pharmacists from 18 French university hospitals. Semistructured interviews were conducted between October 2012 and August 2013. Responses were coded separately by two researchers. Results Physicians and surgeons frequently described innovative medical devices as 'new', 'safe' and 'effective', whereas hospital pharmacists focused more on economic considerations and considered real innovative devices to be those for which no equivalent could be found on the market. No significant difference in evaluation criteria was found between these groups of professionals. Finally, hospital pharmacists considered the management of conflicts of interests in local health technology assessment processes to be an issue, whereas physicians and surgeons did not. Conclusions The present study highlights differences in perceptions related to professional affiliation. The findings suggest several ways in which current practices for local health technology assessment in French university hospitals could be improved and studied. What is known about the topic? Hospitals are faced with ever-growing demands for innovative and costly medical devices. To help hospital management deal with technology acquisition issues, hospital-based health technology assessment has been developed to support decisions. However, little is known about the different perceptions of innovative medical devices among practitioners and how different perceptions may affect decision making. What does this paper add? This paper compares and understands the perceptions of two groups of health professionals concerning innovative devices in the university hospital environment. What are the implications for practitioners? Such a comparison of viewpoints could facilitate improvements in current practices and decision-making processes in local health technology assessment for these medical products.

Patient-Centered mHealth Living Donor Transplant Education Program for African Americans: Development and Analysis

PubMed Central

Sieverdes, John Christopher; Nemeth, Lynne S; Magwood, Gayenell S; Baliga, Prabhakar K; Chavin, Kenneth D; Brunner-Jackson, Brenda; Patel, Sachin K; Ruggiero, Kenneth J

2015-01-01

Background There is a critical need to expand the pool of available kidneys for African Americans who are on the transplant wait-list due to the disproportionally lower availability of deceased donor kidneys compared with other races/ethnic groups. Encouraging living donation is one method to fill this need. Incorporating mHealth strategies may be a way to deliver educational and supportive services to African American transplant-eligible patients and improve reach to those living in remote areas or unable to attend traditional group-session-based programs. Before program development, it is essential to perform formative research with target populations to determine acceptability and cultivate a patient-centered and culturally relevant approach to be used for program development. Objective The objectives of this study were to investigate African American kidney transplant recipients’ and kidney donors’/potential donors’ attitudes and perceptions toward mobile technology and its viability in an mHealth program aimed at educating patients about the process of living kidney donation. Methods Using frameworks from the technology acceptance model and self-determination theory, 9 focus groups (n=57) were administered to African Americans at a southeastern medical center, which included deceased/living donor kidney recipients and living donors/potential donors. After a demonstration of a tablet-based video education session and explanation of a group-based videoconferencing session, focus groups examined members’ perceptions about how educational messages should be presented on topics pertaining to the process of living kidney donation and the transplantation. Questionnaires were administered on technology use and perceptions of the potential program communication platform. Transcripts were coded and themes were examined using NVivo 10 software. Results Qualitative findings found 5 major themes common among all participants. These included the following: (1) strong support for mobile technology use; (2) different media formats were preferred; (3) willingness to engage in video chats, but face-to-face interaction sometimes preferred; (4) media needs to be user friendly; (5) high prevalence of technology access. Our results show that recipients were willing to spend more time on education than the donors group, they wanted to build conversation skills to approach others, and preferred getting information from many sources, whereas the donor group wanted to hear from other living donors. The questionnaires revealed 85% or more of the sample scored 4+ on a 5-point Likert scale, which indicates high degree of interest to use the proposed program, belief that other mHealth technologies would help with adherence to medical regimens, and doctors would make regimen adjustments quicker. In addition, high utilization of mobile technology was reported; 71.9% of the participants had a mobile phone and 43.9% had a tablet. Conclusions Our study supports the use of an mHealth education platform for African Americans to learn about living donation. However, potential recipients and potential donors have differing needs, and therefore, programs should be tailored to each target audience. PMID:26265532

Enhancing the Communication Process of Suddenly Speechless Patients in the Critical Care Setting

PubMed Central

Rowe, Meredeth; Thomas, Loris; Shuster, Jonathan; Koeppel, Brent; Cairns, Paula

2015-01-01

Background Sudden speechlessness is common in critically ill patients with airway intubation or head and neck cancer surgery. Sudden inability to speak poses significant challenges for hospitalized patients as strategies to facilitate communication are often limited and unreliable. Technology- based communication interventions have the potential to facilitate the communication process of hospitalized patients experiencing health events resulting in sudden speechlessness. Methods A quasi-experimental, 4-cohort (control and intervention) repeated measures design was used, with data points occurring daily up to 10 days. The study was conducted in adult critical care units and participants were followed as they were transferred to other units within institutions selected for the study. The impact of a technology-based communication system (intervention) in comparison with a control group (Usual care + Urgent Button) was evaluated. Patient communication outcomes pertinent to communication with nursing staff evaluated in this study included: perception of communication ease, satisfaction with methods used for communication, and frustration with communication. Results A comparison of the intervention and control group indicates that subjects in the intervention group reported lower mean frustration levels (-2.68, SE=0.17; 95% CI -3.02 to -2.34, p=<0.001), and a higher mean satisfaction level (0.59, SE=0.16; 95% CI 0.27 to 0.91; p<0.0001) with use of the communication intervention. Consistent increase of perception of communication ease over the hospital stay was reported by subjects in the intervention group. Conclusions This study facilitated the evaluation of a bedside technology-based communication intervention tailored to the needs of critically ill suddenly speechless patients. PMID:27134237

Preparing for the changing role of instructional technologies in medical education.

PubMed

Robin, Bernard R; McNeil, Sara G; Cook, David A; Agarwal, Kathryn L; Singhal, Geeta R

2011-04-01

As part of an international faculty development conference in February 2010, a working group of medical educators and physicians discussed the changing role of instructional technologies and made recommendations for supporting faculty in using these technologies in medical education. The resulting discussion highlighted ways technology is transforming the entire process of medical education and identified several converging trends that have implications for how medical educators might prepare for the next decade. These trends include the explosion of new information; all information, including both health knowledge and medical records, becoming digital; a new generation of learners; the emergence of new instructional technologies; and the accelerating rate of change, especially related to technology. The working group developed five recommendations that academic health leaders and policy makers may use as a starting point for dealing with the instructional technology challenges facing medical education over the next decade. These recommendations are (1) using technology to provide/support experiences for learners that are not otherwise possible-not as a replacement for, but as a supplement to, face-to-face experiences, (2) focusing on fundamental principles of teaching and learning rather than learning specific technologies in isolation, (3) allocating a variety of resources to support the appropriate use of instructional technologies, (4) supporting faculty members as they adopt new technologies, and (5) providing funding and leadership to enhance electronic infrastructure to facilitate sharing of resources and instructional ideas. © by the Association of American Medical Colleges.

Fire Hazard Assessment in Supporting Fire Protection System Design of a Chemical Process Facility

DTIC Science & Technology

1996-08-01

CSDP/Studies/FireHaz –i– 3/28/97 FIRE HAZARD ASSESSMENT IN SUPPORTING FIRE PROTECTION SYSTEM DESIGN OF A CHEMICAL PROCESS FACILITY Ali Pezeshk...Joseph Chang, Dwight Hunt, and Peter Jahn Parsons Infrastructure & Technology Group, Inc. Pasadena, California 91124 ABSTRACT Because fires in a chemical ...Assessment in Supporting Fire Protection System Design of a Chemical Process Facility 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Nurses' Experiences of an Initial and Reimplemented Electronic Health Record Use.

PubMed

Chang, Chi-Ping; Lee, Ting-Ting; Liu, Chia-Hui; Mills, Mary Etta

2016-04-01

The electronic health record is a key component of healthcare information systems. Currently, numerous hospitals have adopted electronic health records to replace paper-based records to document care processes and improve care quality. Integrating healthcare information system into traditional nursing daily operations requires time and effort for nurses to become familiarized with this new technology. In the stages of electronic health record implementation, smooth adoption can streamline clinical nursing activities. In order to explore the adoption process, a descriptive qualitative study design and focus group interviews were conducted 3 months after and 2 years after electronic health record system implementation (system aborted 1 year in between) in one hospital located in southern Taiwan. Content analysis was performed to analyze the interview data, and six main themes were derived, in the first stage: (1) liability, work stress, and anticipation for electronic health record; (2) slow network speed, user-unfriendly design for learning process; (3) insufficient information technology/organization support; on the second stage: (4) getting used to electronic health record and further system requirements, (5) benefits of electronic health record in time saving and documentation, (6) unrealistic information technology competence expectation and future use. It concluded that user-friendly design and support by informatics technology and manpower backup would facilitate this adoption process as well.

A novel safety device with metal counter meshing gears discriminator directly driven by axial flux permanent magnet micromotors based on MEMS technology

NASA Astrophysics Data System (ADS)

Zhang, Weiping; Chen, Wenyuan; Zhao, Xiaolin; Li, Shengyong; Jiang, Yong

2005-08-01

In a novel safety device based on MEMS technology for high consequence systems, the discriminator consists of two groups of metal counter meshing gears and two pawl/ratchet wheel mechanisms. Each group of counter meshing gears is onepiece and driven directly by an axial flux permanent magnet micromotor respectively. The energy-coupling element is an optical shutter with two collimators and a coupler wheel. The safety device's probability is less than 1/106. It is fabricated by combination of an LiGA-like process and precision mechanical engineering. The device has simple structure, few dynamic problems, high strength and strong reliability.

Algorithm-Based Motion Magnification for Video Processing in Urological Laparoscopy.

PubMed

Adams, Fabian; Schoelly, Reto; Schlager, Daniel; Schoenthaler, Martin; Schoeb, Dominik S; Wilhelm, Konrad; Hein, Simon; Wetterauer, Ulrich; Miernik, Arkadiusz

2017-06-01

Minimally invasive surgery is in constant further development and has replaced many conventional operative procedures. If vascular structure movement could be detected during these procedures, it could reduce the risk of vascular injury and conversion to open surgery. The recently proposed motion-amplifying algorithm, Eulerian Video Magnification (EVM), has been shown to substantially enhance minimal object changes in digitally recorded video that is barely perceptible to the human eye. We adapted and examined this technology for use in urological laparoscopy. Video sequences of routine urological laparoscopic interventions were recorded and further processed using spatial decomposition and filtering algorithms. The freely available EVM algorithm was investigated for its usability in real-time processing. In addition, a new image processing technology, the CRS iimotion Motion Magnification (CRSMM) algorithm, was specifically adjusted for endoscopic requirements, applied, and validated by our working group. Using EVM, no significant motion enhancement could be detected without severe impairment of the image resolution, motion, and color presentation. The CRSMM algorithm significantly improved image quality in terms of motion enhancement. In particular, the pulsation of vascular structures could be displayed more accurately than in EVM. Motion magnification image processing technology has the potential for clinical importance as a video optimizing modality in endoscopic and laparoscopic surgery. Barely detectable (micro)movements can be visualized using this noninvasive marker-free method. Despite these optimistic results, the technology requires considerable further technical development and clinical tests.

Modernization of the NASA scientific and technical information program

NASA Technical Reports Server (NTRS)

Cotter, Gladys A.; Hunter, Judy F.; Ostergaard, K.

1993-01-01

The NASA Scientific and Technical Information Program utilizes a technology infrastructure assembled in the mid 1960s to late 1970s to process and disseminate its information products. When this infrastructure was developed it placed NASA as a leader in processing STI. The retrieval engine for the STI database was the first of its kind and was used as the basis for developing commercial, other U.S., and foreign government agency retrieval systems. Due to the combination of changes in user requirements and the tremendous increase in technological capabilities readily available in the marketplace, this infrastructure is no longer the most cost-effective or efficient methodology available. Consequently, the NASA STI Program is pursuing a modernization effort that applies new technology to current processes to provide near-term benefits to the user. In conjunction with this activity, we are developing a long-term modernization strategy designed to transition the Program to a multimedia, global 'library without walls.' Critical pieces of the long-term strategy include streamlining access to sources of STI by using advances in computer networking and graphical user interfaces; creating and disseminating technical information in various electronic media including optical disks, video, and full text; and establishing a Technology Focus Group to maintain a current awareness of emerging technology and to plan for the future.

COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

PubMed

Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

2015-10-01

The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

Toward an agent-based patient-physician model for the adoption of continuous glucose monitoring technology.

PubMed

Verella, J Tipan; Patek, Stephen D

2009-03-01

Health care is a major component of the U.S. economy, and tremendous research and development efforts are directed toward new technologies in this arena. Unfortunately few tools exist for predicting outcomes associated with new medical products, including whether new technologies will find widespread use within the target population. Questions of technology adoption are rife within the diabetes technology community, and we particularly consider the long-term prognosis for continuous glucose monitoring (CGM) technology. We present an approach to the design and analysis of an agent model that describes the process of CGM adoption among patients with type 1 diabetes mellitus (T1DM), their physicians, and related stakeholders. We particularly focus on patient-physician interactions, with patients discovering CGM technology through word-of-mouth communication and through advertising, applying pressure to their physicians in the context of CGM device adoption, and physicians, concerned about liability, looking to peers for a general level of acceptance of the technology before recommending CGM to their patients. Repeated simulation trials of the agent-based model show that the adoption process reflects the heterogeneity of the adopting community. We also find that the effect of the interaction between patients and physicians is agents. Each physician, say colored by the nature of the environment as defined by the model parameters. We find that, by being able to represent the diverse perspectives of different types of stakeholders, agent-based models can offer useful insights into the adoption process. Models of this sort may eventually prove to be useful in helping physicians, other health care providers, patient advocacy groups, third party payers, and device manufacturers understand the impact of their decisions about new technologies. (c) 2009 Diabetes Technology Society.

Application of 3D Rapid Prototyping Technology in Posterior Corrective Surgery for Lenke 1 Adolescent Idiopathic Scoliosis Patients

PubMed Central

Yang, Mingyuan; Li, Chao; Li, Yanming; Zhao, Yingchuan; Wei, Xianzhao; Zhang, Guoyou; Fan, Jianping; Ni, Haijian; Chen, Ziqiang; Bai, Yushu; Li, Ming

2015-01-01

Abstract A retrospective study to evaluate the effectiveness of 3-dimensional rapid prototyping (3DRP) technology in corrective surgery for Lenke 1 adolescent idiopathic scoliosis (AIS) patients. 3DRP technology has been widely used in medical field; however, no study has been performed on the effectiveness of 3DRP technology in corrective surgery for Lenke 1 AIS patients. Lenke 1 AIS patients who were preparing to undergo posterior corrective surgery from a single center between January 2010 and January 2012 were included in this analysis. Patients were divided into 2 groups. In group A, 3-dimensional (3D) printing technology was used to create subject-specific spine models in the preoperative planning process. Group B underwent posterior corrective surgery as usual (by free hand without image guidance). Perioperative and postoperative clinical outcomes were compared between 2 groups, including operation time, perioperative blood loss, transfusion volume, postoperative hemoglobin (Hb), postoperative complications, and length of hospital stay. Radiological outcomes were also compared, including the assessment of screw placement, postoperative Cobb angle, coronal balance, sagittal vertical axis, thoracic kyphosis, and lumbar lordosis. Subgroup was also performed according to the preoperative Cobb angle: mean Cobb angle <50° and mean Cobb angle >50°. Besides, economic evaluation was also compared between 2 groups. A total of 126 patients were included in this study (group A, 50 and group B, 76). Group A had significantly shorter operation time, significantly less blood loss and transfusion volume, and higher postoperative Hb (all, P < 0.001). However, no significant differences were observed in complication rate, length of hospital stay, and postoperative radiological outcomes between 2 groups (all, P>0.05). There was also no significant difference in misplacement of screws in total populations (16.90% vs 18.82%, P = 0.305), whereas a low misplacement rate of pedicle screws was observed in patients whose mean Cobb angle was >50° (9.15% vs 13.03%, P = 0.02). Besides, using 3DRP increased the economic burden of patients (157,000 ± 9948.85 Ren Min Bi (RMB) vs 152,500 ± 11,445.52 RMB, P = 0.03). Using the 3D printing technology before posterior corrective surgery might reduce the operation time, perioperative blood loss, and transfusion volume. There did not appear to be a benefit to using this technology with respect to complication rate and postoperative radiological outcomes; however, 3D technology could reduce the misplacement rate in patients whose preoperative mean Cobb angle was >50°. Besides, it also increased the patients’ hospital cost. Therefore, future prospective studies are needed to elucidate the efficacy of this emerging technology. PMID:25715261

Manufacturing process applications team (MATeam)

NASA Technical Reports Server (NTRS)

Bangs, E. R.

1980-01-01

The objectives and activities of an aerospace technology transfer group are outlined and programs in various stages of progress are described including the orbital tube flaring device, infrared proximity sensor for robot positioning, laser stripping magnet wire, infrared imaging as welding process tracking system, carbide coating of cutting tools, nondestructive fracture toughness testing of titanium welds, portable solar system for agricultural applications, and an anerobic methane gas generator.

The effects of work-related values on communication between R and D groups, part 1. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Douds, C. F.

1970-01-01

The research concerned with the liaison, interface, coupling, and technology transfer processes that occur in research and development is reported. Overviews of the functions of communication and coupling in the R and D processes, and the theoretical considerations of coupling, communication, and values are presented along with descriptions of the field research program and the instrumentation.

The Value of Harmonizing Multiple Improvement Technologies: A Process Improvement Professional’s View

DTIC Science & Technology

2008-03-01

maturity models and ISO standards, specifically CMMI, CMMI-ACQ and ISO 12207 . Also, the improvement group supplemented their selection of these...compliant with the technologies and standards that are important to the business. Lockheed Martin IS&GS has integrated CMMI, EIA 632, ISO 12207 , and Six...geographically dispersed organization. [Siviy 07-1] Northrop Grumman Mission Systems has integrated CMMI, ISO 9001, AS9100, and Six Sigma, as well as a

Department of Defense Advisory Group on Electron Devices. Special Technology Area Review on Microwave Packaging Technology. Appendix

DTIC Science & Technology

1993-02-01

sintered in hydrogen furnace at very high temperatures . Multiple furnace firing occurs until the binders are removed and part density is achieved "* Process...and base Low temperature co-fired ceramic - Metallized for shielding and grounding - Low resistance thick-film metallization - High thermal resistance...ESPECIALLY LOW TEMPERATURE COFIRED CERAMIC CERAMICS HIGH THERMAL CONDUCTIVITY,MATCHED GaAS AND SILICON SUBSTRATE MATERIALS I I,1Z#A,17Mr1 J, TI

Wireless Sensor Needs Defined by SBIR Topics

NASA Technical Reports Server (NTRS)

Studor, George F.

2010-01-01

This slide presentation reviews the needs for wireless sensor technology from various U.S. government agencies as exhibited by an analysis of Small Business Innovation Research (SBIR) solicitations. It would appear that a multi-agency group looking at overlapping wireless sensor needs and technology projects is desired. Included in this presentation is a review of the NASA SBIR process, and an examination of some of the SBIR projects from NASA, and other agencies that involve wireless sensor development

DARPA Technical Accomplishments. Volume 2. An Historical Review of Selected DARPA Projects

DTIC Science & Technology

1991-04-01

Deputy Director, respectively, of the ARPA Tactical Technology Office, arranged a workshop on tactical systems and technology at the Naval Undersea ...experiment.7 The signal processing for ARTEMIS, and later for LASA, was done by IBM. In the late 1960s the National Academy’s Committee on Undersea Warfare...conducted a Summer Study to review potential advances in undersea surveillance, at the request of the Navy. Among other things this group recommended

Using Six Sigma to Accelerate the Adoption of CMMI for Optimal Results

DTIC Science & Technology

2004-10-01

Findings Path forward © 2004 by Carnegie Mellon University Version 1.0 page 5 Carnegie Mellon S oftware Engineer ing Inst itute Software & IT Best...Related Technology ( COBIT ) Secondary priority • architecture best practices and Design for Six Sigma Primary audiences • Software Engineering Process Groups...itute Context of Findings While our focus was on CMMI, ITIL, and COBIT , we gathered information on other technologies “in play.” • The list included

Meyerhoff Scholars Program: a strengths-based, institution-wide approach to increasing diversity in science, technology, engineering, and mathematics.

PubMed

Maton, Kenneth I; Pollard, Shauna A; McDougall Weise, Tatiana V; Hrabowski, Freeman A

2012-01-01

The Meyerhoff Scholars Program at the University of Maryland, Baltimore County is widely viewed as a national model of a program that enhances the number of underrepresented minority students who pursue science, technology, engineering, and mathematics PhDs. The current article provides an overview of the program and the institution-wide change process that led to its development, as well as a summary of key outcome and process evaluation research findings. African American Meyerhoff students are 5× more likely than comparison students to pursue a science, technology, engineering, and mathematics PhD. Program components viewed by the students as most beneficial include financial scholarship, being a part of the Meyerhoff Program community, the Summer Bridge program, study groups, and summer research. Qualitative findings from interviews and focus groups demonstrate the importance of the Meyerhoff Program in creating a sense of belonging and a shared identity, encouraging professional development, and emphasizing the importance of academic skills. Among Meyerhoff students, several precollege and college factors have emerged as predictors of successful entrance into a PhD program in the science, technology, engineering, and mathematics fields, including precollege research excitement, precollege intrinsic math/science motivation, number of summer research experiences during college, and college grade point average. Limitations of the research to date are noted, and directions for future research are proposed. © 2012 Mount Sinai School of Medicine.

[Methodological approach to designing a telecare system for pre-dialysis and peritoneal dialysis patients].

PubMed

Calvillo-Arbizu, Jorge; Roa-Romero, Laura M; Milán-Martín, José A; Aresté-Fosalba, Nuria; Tornero-Molina, Fernando; Macía-Heras, Manuel; Vega-Díaz, Nicanor

2014-01-01

A major obstacle that hinders the implementation of technological solutions in healthcare is the rejection of developed systems by users (healthcare professionals and patients), who consider that they do not adapt to their real needs. (1) To design technological architecture for the telecare of nephrological patients by applying a methodology that prioritises the involvement of users (professionals and patients) throughout the design and development process; (2) to show how users' needs can be determined and addressed by means of technology, increasing the acceptance level of the final systems. In order to determine the main current needs in Nephrology, a group of Spanish Nephrology Services was involved. Needs were recorded through semi-structured interviews with the medical team and questionnaires for professionals and patients. A set of requirements were garnered from professionals and patients. In parallel, the group of biomedical engineers identified requirements for patient telecare from a technological perspective. All of these requirements drove the design of modular architecture for the telecare of peritoneal dialysis and pre-dialysis patients. This work shows how it is possible to involve users in the whole process of design and development of a system. The result of this work is the design of adaptable modular architecture for the telecare of nephrological patients and it addresses the preferences and needs of patient and professional users consulted.

Text mining factor analysis (TFA) in green tea patent data

NASA Astrophysics Data System (ADS)

Rahmawati, Sela; Suprijadi, Jadi; Zulhanif

2017-03-01

Factor analysis has become one of the most widely used multivariate statistical procedures in applied research endeavors across a multitude of domains. There are two main types of analyses based on factor analysis: Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA). Both EFA and CFA aim to observed relationships among a group of indicators with a latent variable, but they differ fundamentally, a priori and restrictions made to the factor model. This method will be applied to patent data technology sector green tea to determine the development technology of green tea in the world. Patent analysis is useful in identifying the future technological trends in a specific field of technology. Database patent are obtained from agency European Patent Organization (EPO). In this paper, CFA model will be applied to the nominal data, which obtain from the presence absence matrix. While doing processing, analysis CFA for nominal data analysis was based on Tetrachoric matrix. Meanwhile, EFA model will be applied on a title from sector technology dominant. Title will be pre-processing first using text mining analysis.

APPLICATION, PERFORMANCE, AND COSTS OF ...

EPA Pesticide Factsheets

A critical review of biological treatment processes for remediation of contaminated soils is presented. The focus of the review is on documented cost and performance of biological treatment technologies demonstrated at full- or field-scale. Some of the data were generated by the U.S. Environmental Protection Agency's (EPA's) Bioremediation in the Field Program, jointly supported by EPA's Office of Research and Development, EPA's Office of Solid Waste and Emergency Waste, and the EPA Regions through the Superfund Innovative Technology Evaluation Program (SITE) Program. Military sites proved to be another fertile data source. Technologies reviewed in this report include both ex-situ processes, (land treatment, biopile/biocell treatment, composting, and bioslurry reactor treatment) and in-situ alternatives (conventional bioventing, enhanced or cometabolic bioventing, anaerobic bioventing, bioslurping, phytoremediation, and natural attenuation). Targeted soil contaminants at the documented sites were primarily organic chemicals, including BTEX, petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), chlorinated aliphatic hydrocarbons (CAHs), organic solvents, polychlorinated biphenyls (PCBs), pesticides, dioxin, and energetics. The advantages, limitations, and major cost drivers for each technology are discussed. Box and whisker plots are used to summarize before and after concentrations of important contaminant groups for those technologies consider

Post-genomic science: cross-disciplinary and large-scale collaborative research and its organizational and technological challenges for the scientific research process.

PubMed

Welsh, Elaine; Jirotka, Marina; Gavaghan, David

2006-06-15

We examine recent developments in cross-disciplinary science and contend that a 'Big Science' approach is increasingly evident in the life sciences-facilitated by a breakdown of the traditional barriers between academic disciplines and the application of technologies across these disciplines. The first fruits of 'Big Biology' are beginning to be seen in, for example, genomics, (bio)-nanotechnology and systems biology. We suggest that this has profound implications for the research process and presents challenges both in technological design, in the provision of infrastructure and training, in the organization of research groups, and in providing suitable research funding mechanisms and reward systems. These challenges need to be addressed if the promise of this approach is to be fully realized. In this paper, we will draw on the work of social scientists to understand how these developments in science and technology relate to organizational culture, organizational change and the context of scientific work. We seek to learn from previous technological developments that seemed to offer similar potential for organizational and social change.

Managing Process Improvement: A Guidebook for Implementing Change Version 01.00.06

DTIC Science & Technology

1993-12-01

and Competitive Position. Cambridge, 1982 Massachusetts: Massachusetts Institute of Technology. Egan, Gerard Change-Agent Skills B: Managing ... Innovation & Change. San 1988 Diego, California: Pfeiffer & Company. Fowler, Priscilla, and Software Engineering Group Guide. CMU/SEI-90-TR-24. Stan Rifkin

Scientific computations section monthly report, November 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buckner, M.R.

1993-12-30

This progress report from the Savannah River Technology Center contains abstracts from papers from the computational modeling, applied statistics, applied physics, experimental thermal hydraulics, and packaging and transportation groups. Specific topics covered include: engineering modeling and process simulation, criticality methods and analysis, plutonium disposition.

An evaluation of the use of microcomputer-based laboratory instruction on middle school students' concept attainment and attitudes towards computer-based instruction

NASA Astrophysics Data System (ADS)

Osio, Sergio Albina

The advent of instructional technology has become an integral part of the learning process, thought by many to be a vital component in the reform of science instruction. Microcomputer-Based Laboratory (MBL) is an instructional technology environment in which a computer is connected through its Universal Serial Box (USB) port or an interface (for older models) with sensors to control the experiment, collect data, and generate and interpret graphs. In this study, MBL tools and instructions were used to design an instructional program that integrated ideas in teaching thinking skills so that middle school students from varying levels of differentiated achievement could categorize and create concepts grounded on the Concept Attainment Model of teaching. Data were collected and analyzed based on the procedures of a one-group pretest-posttest experimental design and two research questions. The study provided a quantitative correlation of variables such as MBL to students' pretest-posttest total scores; pretest-posttest total scores to the levels of differentiated achievement and treatment groups. Likewise, a modified student-computer-attitude survey was administered to evaluate students' attitude toward the use of computer technologies. The research findings revealed a 9.1% increase in test scores in the three concepts of investigation; multiple increases in test scores in the three levels of differentiated achievement (22.2% for regular science group, 6.2% for accelerated science group students, and 1% for sheltered science group); and 11.1% mean difference between the MHL group and traditional laboratory group. Simultaneously, participants showed a positive significance of 77% feeling of comfort and confidence towards the use of computer technologies. Eventually, the great potential of MBL technology could play an important role in the reform of science education in the schools of the second largest Unified School District in the country today.

Using IT to improve quality at NewYork-Presybterian Hospital: a requirements-driven strategic planning process.

PubMed

Kuperman, Gilad J; Boyer, Aurelia; Cole, Curt; Forman, Bruce; Stetson, Peter D; Cooper, Mary

2006-01-01

At NewYork-Presbyterian Hospital, we are committed to the delivery of high quality care. We have implemented a strategic planning process to determine the information technology initiatives that will best help us improve quality. The process began with the creation of a Clinical Quality and IT Committee. The Committee identified 2 high priority goals that would enable demonstrably high quality care: 1) excellence at data warehousing, and 2) optimal use of automated clinical documentation to capture encounter-related quality and safety data. For each high priority goal, a working group was created to develop specific recommendations. The Data Warehousing subgroup has recommended the implementation of an architecture management process and an improved ability for users to get access to aggregate data. The Structured Documentation subgroup is establishing recommendations for a documentation template creation process. The strategic planning process at times is slow, but assures that the organization is focusing on the information technology activities most likely to lead to improved quality.

Using IT to Improve Quality at NewYork-Presybterian Hospital: A Requirements-Driven Strategic Planning Process

PubMed Central

Kuperman, Gilad J.; Boyer, Aurelia; Cole, Curt; Forman, Bruce; Stetson, Peter D.; Cooper, Mary

2006-01-01

At NewYork-Presbyterian Hospital, we are committed to the delivery of high quality care. We have implemented a strategic planning process to determine the information technology initiatives that will best help us improve quality. The process began with the creation of a Clinical Quality and IT Committee. The Committee identified 2 high priority goals that would enable demonstrably high quality care: 1) excellence at data warehousing, and 2) optimal use of automated clinical documentation to capture encounter-related quality and safety data. For each high priority goal, a working group was created to develop specific recommendations. The Data Warehousing subgroup has recommended the implementation of an architecture management process and an improved ability for users to get access to aggregate data. The Structured Documentation subgroup is establishing recommendations for a documentation template creation process. The strategic planning process at times is slow, but assures that the organization is focusing on the information technology activities most likely to lead to improved quality. PMID:17238381

The relationship between three-dimensional imaging and group decision making: an exploratory study.

PubMed

Litynski, D M; Grabowski, M; Wallace, W A

1997-07-01

This paper describes an empirical investigation of the effect of three dimensional (3-D) imaging on group performance in a tactical planning task. The objective of the study is to examine the role that stereoscopic imaging can play in supporting face-to-face group problem solving and decision making-in particular, the alternative generation and evaluation processes in teams. It was hypothesized that with the stereoscopic display, group members would better visualize the information concerning the task environment, producing open communication and information exchanges. The experimental setting was a tactical command and control task, and the quality of the decisions and nature of the group decision process were investigated with three treatments: 1) noncomputerized, i.e., topographic maps with depth cues; 2) two-dimensional (2-D) imaging; and 3) stereoscopic imaging. The results were mixed on group performance. However, those groups with the stereoscopic displays generated more alternatives and spent less time on evaluation. In addition, the stereoscopic decision aid did not interfere with the group problem solving and decision-making processes. The paper concludes with a discussion of potential benefits, and the need to resolve demonstrated weaknesses of the technology.

Using Multimedia Technology to Build a Community of Practice: Pre-Service Teachers' and Digital Storytelling in South Africa

ERIC Educational Resources Information Center

Chigona, Agnes

2013-01-01

Employing the theory of Community of Practice (CoP), this paper shows how the use of multimedia led a group of pre-service teachers to build a community of practice in the process of completing their individual digital stories for assessment. The paper is focused on a group of diverse pre-service teachers doing their final year at a teacher…

Technologies for physical activity self-monitoring: a study of differences between users and non-users

PubMed Central

Åkerberg, Anna; Söderlund, Anne; Lindén, Maria

2017-01-01

Background Different kinds of physical activity (PA) self-monitoring technologies are used today to monitor and motivate PA behavior change. The user focus is essential in the development process of this technology, including potential future users such as representatives from the group of non-users. There is also a need to study whether there are differences between the groups of users and non-users. The aims of this study were to investigate possible differences between users and non-users regarding their opinions about PA self-monitoring technologies and to investigate differences in demographic variables between the groups. Materials and methods Participants were randomly selected from seven municipalities in central Sweden. In total, 107 adults responded to the Physical Activity Products Questionnaire, which consisted of 22 questions. Results Significant differences between the users and non-users were shown for six of the 20 measurement-related items: measures accurately (p=0.007), measures with high precision (p=0.024), measures distance (p=0.020), measures speed (p=0.003), shows minutes of activity (p=0.004), and shows geographical position (p=0.000). Significant differences between the users and non-users were also found for two of the 29 encouragement items: measures accurately (p=0.001) and has long-term memory (p=0.019). Significant differences between the groups were also shown for level of education (p=0.030) and level of physical exercise (p=0.037). Conclusion With a few exceptions, the users and the non-users in this study had similar opinions about PA self-monitoring technologies. Because this study showed significant differences regarding level of education and level of physical exercise, these demographic variables seemed more relevant to investigate than differences in opinions about the PA self-monitoring technologies. PMID:28280399

A PROCESS OF PRIORITIZING TOPICS FOR HEALTH TECHNOLOGY ASSESSMENT IN KAZAKHSTAN.

PubMed

Kosherbayeva, Lyazzat; Hailey, David; Kurakbaev, Kural; Tabarov, Adlet; Kumar, Ainur; Gutzskaya, Gulnara; Stepkina, Elena

2016-01-01

The aim of this study was to develop criteria for the prioritization of topics for health technology assessment (HTA) in the healthcare system of Kazakhstan. Initial proposals for criteria were suggested through consultation with Ministry of Health (MoH) policy areas. These were refined through a workshop attended by HTA department staff, persons from medical universities and research institutes, and MoH policy makers. The workshop included discussion on methods used in international HTA practice. Opinions of participants on selection of criteria from those specified in a review of prioritization processes were used to define a list for inclusion in an instrument for routine use. A scoring system was established in later discussion. Selected criteria for HTA prioritization were burden of disease, availability of alternative technology, clinical effectiveness, economic efficiency, budget impact, and ethical, legal, and/or psychosocial aspects. For each criterion, a health technology under consideration is given a score from 3 (High) to 1 (Low). The total score determines whether the technology is of high to medium priority or of low priority. Determination of priorities for assessment, using the instrument, should be carried out by an expert group appointed by the MoH. The process was applied in 2014 to a selection of topics, and three health technologies were chosen for full assessments. Criteria for prioritization have evolved with development of the HTA program in Kazakhstan. A method for HTA prioritization has been developed that is easy to apply, requires comparatively few resources, and is compatible with processes required by the MoH.

Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

NASA Astrophysics Data System (ADS)

Gnanakkan, Dionysius Joseph

This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions in Biology documented by American Association for the Advancement of Science. The sample consisted of eight teachers: four rural public school teachers, two public selective enrollment school teachers, and two private school teachers. Each teacher was followed for two Units of instruction. Data collected included classroom observations, field notes, student assignments and tests, teacher interviews, and pre-and post-misconception assessments. Paired t-tests were done to analyze the pre-post test data at a significance level of 0.05 and the qualitative data was analyzed using the constant comparative method. Each case study was characterized and then a cross-case analyses was done to find common themes across the different cases. Teachers were found to use the learning technologies as a tool to supplement instruction to visualize abstract processes, collect data, and explore abstract concepts and processes. Teachers were found to situate learning, use scaffolding and questioning and make students work in collaborative groups. The genetics, photosynthesis, and evolution misconceptions were better alleviated than cellular respiration. Student work that was collected demonstrated a superficial understanding of the concepts under discussion even when they had misconceptions. The teachers used the learning technologies in their classrooms for a variety of reasons: visual illustrations, time-saving measure to collect data, best way to collect data, engaging and fun for students and the interactive nature of the visualization tools and models. The study's findings had many implications for research, professional development, teacher education, teaching practice, administrators, and learning technology developers. More detailed research within similar school settings (public, charter, and private) is needed to verify the common findings across the different cases in this study. An implication is that learning technology integration could be modeled with instructional scaffolds and questioning and incorporating higher order thinking tasks. Learning technology developers should consider the collaborative learning groups while developing these technologies.

No Heat Spray Drying Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beetz, Charles

No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. Inmore » short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.« less

Artificial organs versus regenerative medicine: is it true?

PubMed

Nosé, Yukihiko; Okubo, Hisashi

2003-09-01

Individuals engaged in the fields of artificial kidney and artificial heart have often mistakenly stated that "the era of artificial organs is over; regenerative medicine is the future." Contrarily, we do not believe artificial organs and regenerative medicine are different medical technologies. As a matter of fact, artificial organs developed during the last 50 years have been used as a bridge to regeneration. The only difference between regenerative medicine and artificial organs is that artificial organs for the bridge to regeneration promote tissue regeneration in situ, instead of outside the body (for example, vascular prostheses, neuroprostheses, bladder substitutes, skin prostheses, bone prostheses, cartilage prostheses, ligament prostheses, etc.). All of these artificial organs are successful because tissue regeneration over a man-made prosthesis is established inside the patient's body (artificial organs to support regeneration). Another usage of the group of artificial organs for the bridge to regeneration is to sustain the functions of the patient's diseased organs during the regeneration process of the body's healthy tissues and/or organs. This particular group includes artificial kidney, hepatic assist, respiratory assist, and circulatory assist. Proof of regeneration of these healthy tissues and/or organs is demonstrated in the short-term recovery of end-stage organ failure patients (artificial organs for bridge to regeneration). A third group of artificial organs for the bridge to regeneration accelerates the regenerating process of the patient's healthy tissues and organs. This group includes neurostimulators, artificial blood (red cells) blood oxygenators, and plasmapheresis devices, including hemodiafiltrators. So-called "therapeutic artificial organs" fall into this category (artificial organs to accelerate regeneration). Thus, almost all of today's artificial organs are useful in the bridge to regeneration of healthy natural tissues and organs. It does not matter whether these tissues are cultivated inside or outside the patient's body. Thus, we strongly believe in the need for joint development programs between artificial organ technologies and regenerative medicine technologies. In particular, the importance of using both man-made substitute organ technologies and natural tissue-derived substitute organ technologies is stressed for improved medical care in the future.

Unraveling the development of scientific literacy: Domain-specific inquiry support in a system of cognitive and social interactions

NASA Astrophysics Data System (ADS)

Tabak, Iris Ellen

The goal of this dissertation was to study how to harness technological tools in service of establishing a climate of inquiry in science classrooms. The research is a design experiment drawing on sociocultural and cognitive theory. As part of the BGuILE project, I developed software to support observational research of natural selection, and a complementary high school unit on evolution. Focusing on urban schools, I employed interpretive methods to examine learning as it unfolds in the classroom. I present design principles for realizing a climate of inquiry in technology-infused classrooms. This research contributes to technology design, teaching practice and educational and cognitive research. My pedagogical approach, Domain-Specific Strategic Support (DSSS), helps students analyze and synthesize primary data by making experts' considerations of content knowledge explicit. Students query data by constructing questions from a selection of comparison and variable types that are privileged in the domain. Students organize their data according to evidence categories that comprise a natural selection argument. I compared the inquiry process of contrastive cases: an honor group, a regular group and a lower track group. DSSS enabled students at different achievement levels to set up systematic comparisons, and construct empirically-based explanations. Prior knowledge and inquiry experience influenced spontaneous strategy use. Teacher guidance compensated for lack of experience, and enabled regular level students to employ strategies as frequently as honor students. I extend earlier research by proposing a taxonomy of both general and domain-specific reflective inquiry strategies. I argue that software, teacher and curriculum work in concert to sustain a climate of inquiry. Teachers help realize the potential that technological tools invite. Teachers reinforce software supports by encouraging students utilize technological tools, and by modeling their use. They also establish classroom norms that reflect scientific values. Discussions at the computer allow teachers to provide just-in-time guidance on inquiry actions. Whole class discussions afford sharing insights across groups, and relating finding to normative knowledge. Pretest to posttest improvements in both conceptual and strategic knowledge suggest that DSSS helps reconcile the tension that can exist between content and process goals in inquiry settings.

Effect of processing technologies on the allergenicity of food products.

PubMed

Jiménez-Saiz, Rodrigo; Benedé, Sara; Molina, Elena; López-Expósito, Iván

2015-01-01

Heat treatment has been used since ancient times for food processing, first to ensure the safety of food and its storage, but also to transform its characteristics (in its raw form) and obtain new textures, flavors, or novel foods. However, the transformation experienced by food components when heated, or processed, can dramatically affect the allergenicity of food, either reducing or increasing it. To date, most of the articles published dealing with the changes in the potential allergenicity of food are focused on heat treatment and the Maillard reaction. However, it is also important to give prominence to other group of new technologies developed nowadays, such as high-pressure processing, microwaves and food irradiation. These techniques are not likely to replace traditional processing methods, but they are becoming attractive for the food industry due to different reasons, and it is expected in the near future to have different products on the market processed with these new technologies at an affordable cost. Moreover, other biochemical modifications, particularly enzymatic cross-linking of proteins, have attracted wide-spread attention and will be considered as well in this review, because of its great opportunities to induce protein modification and thus affect food allergenicity. Together with the effect of processing of food allergens, this review will place special attention on gastroduodenal digestion of processed allergens, which directly affects their allergenicity.

A testpart for interdisciplinary analyses in micro production engineering

DOE PAGES

Möhring, H. -C.; Kersting, P.; Carmignato, S.; ...

2015-04-26

In 2011, a round robin test was initiated within the group of CIRP Research Affiliates. The aim was to establish a platform for linking interdisciplinary research in order to share the expertise and experiences of participants all over the world. This paper introduces a testpart which has been designed to allow an analysis of different manufacturing technologies, simulation methods, machinery and metrology as well as process and production planning aspects. Current investigations are presented focusing on the machining and additive processes to produce the geometry, simulation approaches, machine analysis, and a comparison of measuring technologies. Challenges and limitations regarding themore » manufacturing and evaluation of the testpart features by the applied methods are discussed.« less

Digital Denture Fabrication in Pre- and Postdoctoral Education: A Survey of U.S. Dental Schools.

PubMed

Fernandez, Monica A; Nimmo, Arthur; Behar-Horenstein, Linda S

2016-01-01

To survey chairs of prosthodontics or restorative departments and program directors of postdoctoral prosthodontic programs in the United States regarding digital denture fabrication. The key objectives of the survey were to identify the current trends in complete denture fabrication using CAD/CAM technology and to determine how and to what extent this technique is taught and used in U.S. pre- and postdoctoral prosthodontic programs. An invitation to participate in an online survey was sent to 52 prosthodontics/restorative chairs of U.S. dental schools and to all of the 50 program directors of postdoctoral prosthodontics programs. A version of the survey with the same questions was sent to a national sample of prosthodontics/restorative chairs and program directors of postdoctoral prosthodontics. The 20-item survey took approximately 15 minutes to complete. Dependent samples paired t-test was run on items that were the same in both surveys. The response rate for the survey was 63% for department chairs and 44% for program directors. All respondents with the exception of one department chair were aware of CAD/CAM technology used for denture fabrication. More than half of the program directors (52.4%) compared to 12.1% of chairs have incorporated some aspects of CAD/CAM denture fabrication technology into their curriculum. When asked if the fabrication cost prevented introducing this technology in the predoctoral/postdoctoral curriculum, 52.4% of the department chairs affirmed this response compared to 12.1% of the program directors. There was a significant difference between groups when asked if they had incorporated the CAD/CAM denture fabrication technique into the postgraduate/predoctoral curriculum. Department chairs reported less usage of CAD/CAM technology. Only 12.1% of department chairs reported using some aspects of CAD/CAM technology in the predoctoral curriculum compared to 52.4% in the postdoctoral curriculum (F = 13.528, p ≤ 0.001). While this technology is used in four predoctoral clinics, none of the chairs reported including CAD/CAM denture fabrication in their preclinical complete denture courses. For the schools using the technology, 33.3% of postdoctoral and 30.3% of predoctoral programs use it to make a denture with a try-in step; however, 19% of the postdoctoral and 18.2% of predoctoral programs process the dentures without a try-in appointment. Slightly less than half (42.9%) of graduate programs are using the technology to make just the denture bases. Only a small proportion (10% or less) of the total number of dentures processed in post- and predoctoral programs are made using CAD/CAM technology. The proportion of postdoctoral programs that process cases using CAD/CAM technology was significantly higher than in predoctoral programs (F = 5.106, p ≤ 0.028). Many schools indicated that they are in a "trial phase" to evaluate the technique, especially at the predoctoral level. Also, 19% (n = 4) of postdoctoral and 15.2% (n = 5) of predoctoral respondents have created continuing education courses. Of postdoctoral programs, 38.1% (n = 8) plan to introduce this technology at some point in the near future (next 1 to 4 years); 27.3% of predoctoral programs plan to as well. All program directors and department chairs who participated in the survey are aware of this technology with the exception of one department chair. More than half of the program directors reported that they have incorporated this technology in their curricula compared to only 12% of department chairs. Currently, only 10% or less of complete denture cases are processed using the CAD/CAM technology, at either the post- or predoctoral levels. Both groups reported that the main use of this technology is for the fabrication of denture bases and for processing dentures including the try-in step. The majority of respondents in both groups indicated they plan to add digital denture fabrication into their curricula within the next 1 to 4 years. © 2015 by the American College of Prosthodontists.

Distributed control network for optogenetic experiments

NASA Astrophysics Data System (ADS)

Kasprowicz, G.; Juszczyk, B.; Mankiewicz, L.

2014-11-01

Nowadays optogenetic experiments are constructed to examine social behavioural relations in groups of animals. A novel concept of implantable device with distributed control network and advanced positioning capabilities is proposed. It is based on wireless energy transfer technology, micro-power radio interface and advanced signal processing.

2005 5th Annual CMMI Technology Conference and User Group. Volume 4: Thursday

DTIC Science & Technology

2005-11-17

Identification and Involvement in the CMMI, Mr. James R. Armstrong , Systems and Software Consortium Ensuring the Right Process is Deployed Right...Customer-Driven Organization Chart Marketing Management: Analysis, Planning, Implementation and Control Philip Kotler © Prentice Hall Being Customer

Speech Processing.

DTIC Science & Technology

1983-05-01

The VDE system developed had the capability of recognizing up to 248 separate words in syntactic structures. 4 The two systems described are isolated...size, weight, and power consumption of VDE devices (See Fig. 19). 8. DUU and NATU Advisory Groups on Voice Technology At the present time, two major

OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

NASA Astrophysics Data System (ADS)

Gabor, A.; Jivanescu, A.; Zaharia, C.; Hategan, S.; Topala, F. I.; Levai, C. M.; Negrutiu, M. L.; Sinescu, C.; Duma, V.-F.; Bradu, A.; Podoleanu, A. Gh.

2016-03-01

Digital impressions were introduced to overcome some of the obstacles due to traditional impression materials and techniques. The aim of this in vitro study is to compare the accuracy of all ceramic crowns obtained with digital impression and CAD-CAM technology with the accuracy of those obtained with conventional impression techniques. Two groups of 10 crowns each have been considered. The digital data obtained from Group 1 have been processed and the all-ceramic crowns were milled with a CAD/CAM technology (CEREC MCX, Sirona). The all ceramic crowns in Group 2 were obtained with the classical technique of pressing (emax, Ivoclar, Vivadent). The evaluation of the marginal adaptation was performed with Time Domain Optical Coherence Tomography (TD OCT), working at a wavelength of 1300 nm. Tri-dimensional (3D) reconstructions of the selected areas were obtained. Based on the findings in this study, one may conclude that the marginal accuracy of all ceramic crowns fabricated with digital impression and the CAD/CAM technique is superior to the conventional impression technique.

A Method for Co-Designing Theory-Based Behaviour Change Systems for Health Promotion.

PubMed

Janols, Rebecka; Lindgren, Helena

2017-01-01

A methodology was defined and developed for designing theory-based behaviour change systems for health promotion that can be tailored to the individual. Theories from two research fields were combined with a participatory action research methodology. Two case studies applying the methodology were conducted. During and between group sessions the participants created material and designs following the behaviour change strategy themes, which were discussed, analysed and transformed into a design of a behaviour change system. Theories in behavioural change and persuasive technology guided the data collection, data analyses, and the design of a behaviour change system. The methodology has strong emphasis on the target group's participation in the design process. The different aspects brought forward related to behaviour change strategies defined in literature on persuasive technology, and the dynamics of these are associated to needs and motivation defined in literature on behaviour change. It was concluded that the methodology aids the integration of theories into a participatory action research design process, and aids the analyses and motivations of design choices.

COINS: A composites information database system

NASA Technical Reports Server (NTRS)

Siddiqi, Shahid; Vosteen, Louis F.; Edlow, Ralph; Kwa, Teck-Seng

1992-01-01

An automated data abstraction form (ADAF) was developed to collect information on advanced fabrication processes and their related costs. The information will be collected for all components being fabricated as part of the ACT program and include in a COmposites INformation System (COINS) database. The aim of the COINS development effort is to provide future airframe preliminary design and fabrication teams with a tool through which production cost can become a deterministic variable in the design optimization process. The effort was initiated by the Structures Technology Program Office (STPO) of the NASA LaRC to implement the recommendations of a working group comprised of representatives from the commercial airframe companies. The principal working group recommendation was to re-institute collection of composite part fabrication data in a format similar to the DOD/NASA Structural Composites Fabrication Guide. The fabrication information collection form was automated with current user friendly computer technology. This work in progress paper describes the new automated form and features that make the form easy to use by an aircraft structural design-manufacturing team.

Self-assembling electroactive hydrogels for flexible display technology

NASA Astrophysics Data System (ADS)

Jones, Scott L.; Hou Wong, Kok; Thordarson, Pall; Ladouceur, François

2010-12-01

We have assessed the potential of self-assembling hydrogels for use in conformal displays. The self-assembling process can be used to alter the transparency of the material to all visible light due to scattering by fibres. The reversible transition is shown to be of low energy by differential scanning calorimetry. For use in technology it is imperative that this transition is controlled electrically. We have thus synthesized novel self-assembling hydrogelator molecules which contain an electroactive group. The well-known redox couple of anthraquinone/anthrahydroquinone has been used as the hydrophobic component for a series of small molecule gelators. They are further functionalized with peptide combinations of L-phenylalanine and glycine to provide the hydrophilic group to complete 'head-tail' models of self-assembling gels. The gelation and electroactive characteristics of the series were assessed. Cyclic voltammetry shows the reversible redox cycle to be only superficially altered by functionalization. Additionally, spectroelectrochemical measurements show a reversible transparency and colour change induced by the redox process.

Automated Space Processing Payloads Study. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1975-01-01

An investigation is described which examined the extent to which the experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts are defined which make extensive use of automation technology. Topics covered include experiment requirements and hardware data, capabilities and characteristics of industrial automation equipment and controls, payload grouping, automated payload conceptual design, space processing payload preliminary design, automated space processing payloads for early shuttle missions, and cost and scheduling.

Optimize Use of Space Research and Technology for Medical Devices

NASA Technical Reports Server (NTRS)

Minnifield, Nona K.

2012-01-01

systems, and cutting-edge component technologies to conduct a wide range of scientific observations and measurements. These technologies are also considered for practical applications that benefit society in remarkable ways. At NASA Goddard, the technology transfer initiative promotes matching technologies from Earth and space science needs to targeted industry sectors. This requires clear knowledge of industry needs and priorities and social demands. The process entails matching mature technologies where there are known innovation challenges and good opportunities for matching technology needs. This requires creative thinking and takes commitment of time and resources. Additionally, we also look at applications for known hot industry or societal needs. Doing so has given us occasion to host discussions with representatives from industry, academia, government organizations, and societal special interest groups about the application of NASA Goddard technologies for devices used in medical monitoring and detection tools. As a result, partnerships have been established. Innovation transpired when new products were enabled because of NASA Goddard research and technology programs.

Lessons learned in acquiring new regulations for shipping advanced electric vehicle batteries

NASA Astrophysics Data System (ADS)

Henriksen, Gary; Hammel, Carol; Altemos, Edward A.

1994-12-01

In 1990, the Electric and Hybrid Propulsion Division of the US Department of Energy established its ad hoc EV Battery Readiness Working Group to identify regulatory barriers to the commercialization of advanced EV battery technologies and facilitate the removal of these barriers. A Shipping Sub-Working Group (SSWG) was formed to address the regulatory issues associated with the domestic and international shipment of these new battery technologies. The SSWG invites major industrial developers of advanced battery technologies to join as members and work closely with appropriate domestic and international regulatory authorities to develop suitable regulations and procedures for the safe transport of these new battery technologies. This paper describes the domestic and international regulatory processes for the transport of dangerous goods; reviews the status of shipping regulations for sodium-beta and lithium batteries; and delineates the lessons learned to date in this process. The sodium-beta battery family was the first category of advanced EV batteries to be addressed by the SSWG. It includes both sodium/sulfur and sodium/metal chloride batteries. Their efforts led to the establishment of a UN number (UN 3292) in the UN Recommendations, for cold cells and batteries, and establishment of a US Department of Transportation general exemption (DOT-E-10917) covering cold and hot batteries, as well as cold cells. The lessons learned for sodium-beta batteries, over the period of 1990--94, are now being applied to the development of regulations for shipping a new generation of lithium battery technologies (lithium-polymer and lithium-aluminum/iron sulfide batteries).

Extraction of latent images from printed media

NASA Astrophysics Data System (ADS)

Sergeyev, Vladislav; Fedoseev, Victor

2015-12-01

In this paper we propose an automatic technology for extraction of latent images from printed media such as documents, banknotes, financial securities, etc. This technology includes image processing by adaptively constructed Gabor filter bank for obtaining feature images, as well as subsequent stages of feature selection, grouping and multicomponent segmentation. The main advantage of the proposed technique is versatility: it allows to extract latent images made by different texture variations. Experimental results showing performance of the method over another known system for latent image extraction are given.

Manufacturing the Future: Federal Priorities for Manufacturing Research and Development. Report of the Interagency Working Group on Manufacturing R&D, Committee on Technology, National Science and Technology Council

DTIC Science & Technology

2008-03-01

and virtual elimination of vehicular emissions of pollutants and greenhouse gases. Low- cost, high-volume manufacturing processes and development...intended to help achieve energy security and virtually eliminate vehicular emissions of pollutants and greenhouse gases. This goal is being pursued...the coolant system, for example, and the humidification system must be integrated with the air blower. Construction of the power plant is usually

JPRS Report, Science & Technology, Europe & Latin America

DTIC Science & Technology

1987-12-21

situated among these lattice components. The substitution of trivalent lanthanium with bivalent barium or strontium leads to a charge deficit which can...Engineering, Ferranti, J.K. Lasers, Welding Institute, and UK AEA Culham; the French firms Cilas (CGE Group) and Crouzet, the French Ministry of Research...uses lasers for cutting and welding processes and for heat and photochemical processing. 8615 CSO: 3698/MO15 42 METALLURGICAL INDUSTRIES WEST EUROPE

Software Process Improvement Journey: IBM Australia Application Management Services

DTIC Science & Technology

2005-03-01

learned from its successes and mistakes and then applied that learning to the next project . 28 CMU/SEI-2005-TR...worldwide re- quirements for project management and quality; it was the organization’s staff members who played a part in the development of the ...environ- ment and that it involves personnel from a variety of areas, ideally not part of the group that developed the technology or process

Atomic-order thermal nitridation of group IV semiconductors for ultra-large-scale integration

NASA Astrophysics Data System (ADS)

Murota, Junichi; Le Thanh, Vinh

2015-03-01

One of the main requirements for ultra-large-scale integration (ULSI) is atomic-order control of process technology. Our concept of atomically controlled processing for group IV semiconductors is based on atomic-order surface reaction control in Si-based CVD epitaxial growth. On the atomic-order surface nitridation of a few nm-thick Ge/about 4 nm-thick Si0.5Ge0.5/Si(100) by NH3, it is found that N atoms diffuse through nm-order thick Ge layer into Si0.5Ge0.5/Si(100) substrate and form Si nitride, even at 500 °C. By subsequent H2 heat treatment, although N atomic amount in Ge layer is reduced drastically, the reduction of the Si nitride is slight. It is suggested that N diffusion in Ge layer is suppressed by the formation of Si nitride and that Ge/atomic-order N layer/Si1-xGex/Si (100) heterostructure is formed. These results demonstrate the capability of CVD technology for atomically controlled nitridation of group IV semiconductors for ultra-large-scale integration. Invited talk at the 7th International Workshop on Advanced Materials Science and Nanotechnology IWAMSN2014, 2-6 November, 2014, Ha Long, Vietnam.

Revitalized militarily critical technologies program

NASA Astrophysics Data System (ADS)

Wick, Raymond V.

2005-04-01

The Department of Defense (DoD) Militarily Critical Technologies Program (MCTP) provides a systematic, ongoing assessment and analysis of goods and technologies to determine those that would permit significant advances in the development, production and use of military capabilities of potential adversaries and those that are being developed worldwide that have the potential to significantly enhance or degrade US military capabilities in the future. The program's objective is to characterize the technologies, including quantitative values and parameters, and assess worldwide technology capabilities. The MCTP is composed of two sets of documents, the well known and often referenced one, the MCTL, and a second one, a more recently added list called the Developing Science and Technologies List (DSTL). Both are products of the MCTP process, however, the later is primarily used by DDR&E and other government organizations and agencies to aid in the prioritization and understanding of new technologies being developed worldwide. Technologies are selected for the MCTL and the DSTL through the deliberation and consensus of Technology Working Groups (TWGs). TWGs continually screen technologies and nominate items to be added or removed from the MCTL and the DSTL as appropriate. Working within an informal structure, TWG members are composed of government, industry and academia subject matter experts, who strive to produce precise and objective analyses across each technology areas. This process and details of the current MCTP are outlined in this poster paper. This paper focuses on the solid state laser technology area, using it as an example of the MCTP's product of assessing, identifying, and quantifying militarily critical technology parameters.

Acetylene terminated matrix resins

NASA Technical Reports Server (NTRS)

Goldfarb, I. J.; Lee, Y. C.; Arnold, F. E.; Helminiak, T. E.

1985-01-01

The synthesis of resins with terminal acetylene groups has provided a promising technology to yield high performance structural materials. Because these resins cure through an addition reaction, no volatile by-products are produced during the processing. The cured products have high thermal stability and good properties retention after exposure to humidity. Resins with a wide variety of different chemical structures between the terminal acetylene groups are synthesized and their mechanical properties studied. The ability of the acetylene cured polymers to give good mechanical properties is demonstrated by the resins with quinoxaline structures. Processibility of these resins can be manipulated by varying the chain length between the acetylene groups or by blending in different amounts of reactive deluents. Processing conditions similar to the state-of-the-art epoxy can be attained by using backbone structures like ether-sulfone or bis-phenol-A. The wide range of mechanical properties and processing conditions attainable by this class of resins should allow them to be used in a wide variety of applications.

[Technology and disciplinary fields: cytotechnicians and implementation of the Pap test in Brazil].

PubMed

Teixeira, Luiz Antonio; Pumar, Leticia

2014-01-01

The implementation of the Pap test as a primary technology in the control of cervical cancer in Brazil was the result of choices, agreements and disputes among certain professional groups, including physicians from various specialisations, pharmacists, biologists, biomedical scientists and cytotechnologists. The first part of the paper describes the process of formulating Brazil's first screening campaigns using the Pap smear, and the subsequent emergence of the profession of cytotechnology, whose practitioners interpret this test. Second, based on questions raised by international historiography in the field of science and technology, we explore in detail how the adoption of the Pap smear transpired within the Brazilian context, focussing on the debates among the various professional groups with an interest in the suitability of the test and on the relationships between the public and private healthcare sectors. We show that the professional career of cytotechnologists and the way in which the Pap smear has been implemented as a central technology for cervical cancer screening in Brazil have been shaped by the conflicting views of this technology held by different disciplines as well as by the relationship between these disciplines and labour market dynamics.

1001619

NASA Image and Video Library

2010-09-15

SAMUEL SMITH (WELD TECHNICIAN, JACOBS ESTS GROUP/ALL POINTS) AND ANDRÉ PASEUR (WELD TECHNICIAN, JACOBS ESTS GROUP/ERC) DISPLAY TWO PROCESS DEMONSTRATION ARTICLES – A 9-FOOT BUTT WELD (FOREGROUND) AND A HEXAGON FABRICATED FROM FRICTION STIR WELDED PLATES (BACKGROUND) – THAT WERE FABRICATED FROM 6AL-4V TITANIUM (ELI) USING THERMAL STIR WELDING. THIS WORK WAS PERFORMED FOR A NASA TECHNOLOGY TRANSFER INDUSTRIAL PARTNER (KEYSTONE SYNERGETIC ENTERPRISES, INC.) IN SUPPORT OF A PROJECT FOR THE U.S. NAVY

"Hedge Your Bets": Technology's Role in Young Gay Men's Relationship Challenges.

PubMed

McKie, Raymond M; Milhausen, Robin R; Lachowsky, Nathan J

2017-01-01

Technology is playing an increasingly pervasive role among young gay men in the process of meeting potential romantic or sexual partners. We investigated challenges posed by technology related to young gay men's relationships. Focus groups (n = 9) of young gay men aged 18-24 (n = 43) were transcribed verbatim, and thematic analysis was used to identify two major themes regarding challenges to relationship development and maintenance. Subthemes include unrealistic expectations of relationships, inauthentic self-presentation online, sexual primacy over romance, increased opportunities for infidelity, and jealousy. The implications of this study for sexual education and sexual health promotion are discussed.

A Novel Group Engagement Score for Virtual Learning Environments

ERIC Educational Resources Information Center

Castellanos, Jorge; Haya, Pablo A.; Urquiza-Fuentes, Jaime

2017-01-01

STEM (Science, Technology, Engineering, and Math) education is currently receiving much attention from governments and educational institutions. Our work is based on active learning and video-based learning approaches to support STEM education. Here, we aimed to increase students' engagement through reflective processes that embrace video…

Managing the space sciences

NASA Technical Reports Server (NTRS)

1995-01-01

In April 1994 the National Research Council received a request from NASA that the NRC's Space Studies Board provide guidance on questions relating to the management of NASA's programs in the space sciences. The issues raised in the request closely reflect questions posed in the agency's fiscal year 1994 Senate appropriations report. These questions included the following: Should all the NASA space science programs be gathered into a 'National Institute for Space Science'? What other organizational changes might be made to improve the coordination and oversight of NASA space science programs? What processes should be used for establishing interdisciplinary science priorities based on scientific merit and other criteria, while ensuring opportunities for newer fields and disciplines to emerge? And what steps could be taken to improve utilization of advanced technologies in future space scienc missions? This report details the findings of the Committee on the Future of Space Science (FOSS) and its three task groups: the Task Group on Alternative Organizations, Task Group on Research Prioritization, and the Task Group on Technology.

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

NASA Astrophysics Data System (ADS)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

Assistive Technology Provision Within the Navajo Nation

PubMed Central

Ripat, Jacquie D.

2014-01-01

In this study we explored the factors that affect assistive technology (AT) provision within the Navajo Nation using a qualitative approach to inquiry. Focus groups were held in which AT users discussed their awareness of AT and their need for, use of, and satisfaction with AT devices and services. Twenty-eight individuals who used wheelchairs, orthotics or prosthetics, hearing aids, communication aids, vision aids, and other AT participated in one of seven focus groups. Seven AT providers discussed the facilitators and barriers that affect AT provision. The findings revealed six themes common to both stakeholder groups and two additional themes for AT users. The central theme for AT users centered on (not) feeling understood; the central theme for AT providers revolved around the processes, activities, and roles the providers engaged in at times for different clients. Activities to increase awareness and to promote successful AT provision and satisfaction with AT devices were proposed. PMID:25147224

Group-oriented coordination models for distributed client-server computing

NASA Technical Reports Server (NTRS)

Adler, Richard M.; Hughes, Craig S.

1994-01-01

This paper describes group-oriented control models for distributed client-server interactions. These models transparently coordinate requests for services that involve multiple servers, such as queries across distributed databases. Specific capabilities include: decomposing and replicating client requests; dispatching request subtasks or copies to independent, networked servers; and combining server results into a single response for the client. The control models were implemented by combining request broker and process group technologies with an object-oriented communication middleware tool. The models are illustrated in the context of a distributed operations support application for space-based systems.

Investing in New Technology in Pulmonary Medicine: Navigating the Tortuous Path to Success.

PubMed

Kruklitis, Robert; French, Kim; Cangelosi, Michael Joseph; Kovitz, Kevin L

2017-09-01

The introduction of new technologies offers the promise to advance medicine. This occurs alongside improved efforts to control costs of health care by hospital administrators, the Centers for Medicare & Medicaid Services' (CMS) pivot to value programs, and commercial payers' efforts to reduce reimbursement. These trends present a challenge for the pulmonologist, among others, who must navigate increasingly complex and highly scrutinized evaluation processes used to secure new technology (NT). Health-care providers are turning toward value assessments while simultaneously tasked with the mission of offering state of the art technologies and services. Pulmonologists desiring NT are thus faced with increased scrutiny in their evaluation of costs and clinical data to support investments. Consideration of this scrutiny and further evidence to temper the evaluation will improve the likelihood of adoption and patient access to clinically impactful technology. The identification of this evidence may provide a comprehensive view of the clinical and economic benefits of such technologies to both administrators and pulmonary clinicians. It is imperative that all parties involved in the decision process work collaboratively to deploy value added and clinically impactful technologies. Although a physician group might invest in such NT, the capital required often leads such decisions to a larger organization such as a hospital, health-care system, or privately owned entity. This article aims to provide a framework for pulmonary clinicians to better understand the processes that purchasers use to evaluate NT, the pressures that influence their consideration, and what resources may be leveraged toward success. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Status of pre-processing of waste electrical and electronic equipment in Germany and its influence on the recovery of gold.

PubMed

Chancerel, Perrine; Bolland, Til; Rotter, Vera Susanne

2011-03-01

Waste electrical and electronic equipment (WEEE) contains gold in low but from an environmental and economic point of view relevant concentration. After collection, WEEE is pre-processed in order to generate appropriate material fractions that are sent to the subsequent end-processing stages (recovery, reuse or disposal). The goal of this research is to quantify the overall recovery rates of pre-processing technologies used in Germany for the reference year 2007. To achieve this goal, facilities operating in Germany were listed and classified according to the technology they apply. Information on their processing capacity was gathered by evaluating statistical databases. Based on a literature review of experimental results for gold recovery rates of different pre-processing technologies, the German overall recovery rate of gold at the pre-processing level was quantified depending on the characteristics of the treated WEEE. The results reveal that - depending on the equipment groups - pre-processing recovery rates of gold of 29 to 61% are achieved in Germany. Some practical recommendations to reduce the losses during pre-processing could be formulated. Defining mass-based recovery targets in the legislation does not set incentives to recover trace elements. Instead, the priorities for recycling could be defined based on other parameters like the environmental impacts of the materials. The implementation of measures to reduce the gold losses would also improve the recovery of several other non-ferrous metals like tin, nickel, and palladium.

Eco-Balance analysis of the disused lead-acid-batteries recycling technology

NASA Astrophysics Data System (ADS)

Kamińska, Ewa; Kamiński, Tomasz

2017-10-01

The article presents the results of the eco-balance analysis of the disused lead-acid batteries recycling process. Test-dedicated technology offers the possibility to recover other elements, for example, polypropylene of the battery case or to obtain crystalline sodium sulphate. The life cycle assessment was made using ReCiPe and IMPACT2002 + methods. The results are shown as environmental points [Pt]. The results are shown in the environmental categories, specific for each of the methods grouped in the impact categories. 1 Mg of the processed srap was a dopted as the functional unit. The results of the analyses indicate that recycling processes may provide the environmental impact of recycling technology less harmful. Repeated use of lead causes that its original sources are not explored. Similarly, the use of granule production-dedicated polypropylene extracted from battery casings that are used in the plastics industry, has environmental benefits. Due to the widespread use of lead-acid batteries, the attention should be paid to their proper utilization, especially in terms of heavy metals, especially lead. According to the calculations, the highest level of environmental benefits from the use of lead from secondary sources in the production of new products, was observed in the refining process.

The process of decision-making in home-care case management: implications for the introduction of universal assessment and information technology.

PubMed

Egan, Mary; Wells, Jennie; Byrne, Kerry; Jaglal, Susan; Stolee, Paul; Chesworth, Bert M; Hillier, Loretta M

2009-07-01

Increasingly, jurisdictions are adopting universal assessment procedures and information technology to aid in healthcare data collection and care planning. Before their potential can be realised, a better understanding is needed of how these systems can best be used to support clinical practice. We investigated the decision-making process and information needs of home-care case managers in Ontario, Canada, prior to the widespread use of universal assessment, with a view of determining how universal assessment and information technology could best support this work. Three focus groups and two individual interviews were conducted; questioning focused on decision-making in the post-acute care of individuals recovering from a hip fracture. We found that case managers' decisional process was one of a clinician-broker, combining clinical expertise and information about local services to support patient goals within the context of limited resources. This process represented expert decision-making, and the case managers valued their ability to carry out non-standardised interviews and override system directives when they noted that data may be misleading. Clear information needs were found in four areas: services available outside of their regions, patient medical information, patient pre-morbid functional status and partner/spouse health and functional status. Implications for the use of universal assessment are discussed. Recommendations are made for further research to determine the impact of universal assessment and information technology on the process and outcome of home-care case manager decision-making.

Community views and perspectives on public engagement in health technology assessment decision making.

PubMed

Wortley, Sally; Tong, Allison; Howard, Kirsten

2017-03-01

Objectives The aim of the present study was to describe community views and perspectives on public engagement processes in Australian health technology assessment (HTA) decision making. Methods Six focus groups were held in Sydney (NSW, Australia) as part of a broad program of work on public engagement and HTA. Eligible participants were aged ≥18 years and spoke English. Participants were asked about their views and perspectives of public engagement in the HTA decision-making process, with responses analysed using a public participation framework. Results Fifty-eight participants aged 19-71 years attended the focus groups. Responses from the public indicated that they wanted public engagement in HTA to include a diversity of individuals, be independent and transparent, involve individuals early in the process and ensure that public input is meaningful and useful to the process. This was consistent with the public participation framework. Perceived shortcomings of the current public engagement process were also identified, namely the lack of awareness of the HTA system in the general population and the need to acknowledge the role different groups of stakeholders or 'publics' can have in the process. Conclusions The public do see a role for themselves in the HTA decision-making process. This is distinct to the involvement of patients and carers. It is important that any future public engagement strategy in this field distinguishes between stakeholder groups and outline approaches that will involve members of the public in the decision-making process, especially if public expectations of involvement in healthcare decision-making continue to increase. What is known about this topic? The views and perspectives of patients and consumers are important in the HTA decision-making process. There is a move to involve the broader community, particularly as decisions become increasingly complex and resources more scarce. What does this paper add? It not been known to what extent, or at what points, the community would like to be engaged with the HTA decision-making process. The present study adds to the evidence base on this topic by identifying features of engagement that may be important in determining the extent of wider public involvement. It is clear that the community expects the system to be transparent, for patients to be involved early in specific processes and the wider community to be able to contribute to the broader vision of the healthcare system. What are the implications for practitioners? A formalised strategy is needed to include the public voice into health technology decisions. With the current level of reform in the healthcare sector and the focus on creating a sustainable healthcare system, there is a real opportunity to implement an approach that not only informs patients and the community of the challenges, but includes and incorporates their views into these decisions. This will assist in developing and adapting policy that is relevant and meets the needs of the population.

Using the stepladder technique to facilitate the performance of audioconferencing groups.

PubMed

Rogelberg, Steven G; O'Connor, Matthew S; Sederburg, Matthew

2002-10-01

Organizational workforces are becoming increasingly dispersed. To facilitate communications among individuals or groups of people located in a number of different locations, teleconferencing technologies, such as audioconferencing, have been developed. The authors examined whether a structural group intervention, the stepladder technique, can facilitate the task performance of 4-person groups (n = 52) when using audioconferencing. Consistent with research conducted on face-to-face groups, the stepladder technique was found to facilitate the decision-making performance of groups interacting via audioconference. The authors postulated that certain structural elements of the stepladder technique compensate for obstacles inherent in nonvisual communications. Supplementary analyses examined best member influence and the existence of order of entry effects into the stepladder process.

Technology-mediated therapy for chronic pain management: the challenges of adapting behavior change interventions for delivery with pervasive communication technology.

PubMed

Rosser, Benjamin A; McCullagh, Paul; Davies, Richard; Mountain, Gail A; McCracken, Lance; Eccleston, Christopher

2011-04-01

Adapting therapeutic practice from traditional face-to-face exchange to remote technology-based delivery presents challenges for the therapist, patient, and technical writer. This article documents the process of therapy adaptation and the resultant specification for the SMART2 project-a technology-based self-management system for assisting long-term health conditions, including chronic pain. Focus group discussions with healthcare professionals and patients were conducted to inform selection of therapeutic objectives and appropriate technology. Pertinent challenges are identified, relating to (1) reduction and definition of therapeutic objectives, and (2) how to approach adaptation of therapy to a form suited to technology delivery. The requirement of the system to provide dynamic and intelligent responses to patient experience and behavior is also emphasized. Solutions to these challenges are described in the context of the SMART2 technology-based intervention. More explicit discussion and documentation of therapy adaptation to technology-based delivery within the literature is encouraged.

Academic Primer Series: Key Papers About Teaching with Technology.

PubMed

Boysen-Osborn, Megan; Cooney, Robert; Gottlieb, Michael; Chan, Teresa M; Brown, Aaron; King, Andrew; Tobias, Adam; Thoma, Brent

2017-06-01

Modern learners have immediate, unlimited access to a wide variety of online resources . To appeal to this current generation of learners, educators must embrace the use of technology. However, educators must balance newer, novel technologies with traditional methods to achieve the best learning outcomes. Therefore, we aimed to review several papers useful for faculty members wishing to incorporate technology into instructional design. We identified a broad list of papers relevant to teaching and learning with technology within the online discussions of the Academic Life in Emergency Medicine (ALiEM) Faculty Incubator. This list was augmented with suggestions by a guest expert (BT) and an open call on Twitter (tagged with the #meded and #FOAMed hashtags) yielding 24 papers. We then conducted a modified three-round Delphi process within the authorship group, including junior and senior faculty members, to identify the most impactful papers. We pared the list of 24 papers to five that were most highly rated. Two were research papers and three were commentaries or editorials. The authorship group reviewed and summarized these papers with specific consideration to their value to junior educators and faculty developers. This is a key reading list for junior faculty members and faculty developers interested in teaching with technology. The commentary contextualizes the importance of these papers for medical educators, to optimize use of technology in their teaching or incorporate into faculty development.

Academic Primer Series: Key Papers About Teaching with Technology

PubMed Central

Boysen-Osborn, Megan; Cooney, Robert; Gottlieb, Michael; Chan, Teresa M.; Brown, Aaron; King, Andrew; Tobias, Adam; Thoma, Brent

2017-01-01

Introduction Modern learners have immediate, unlimited access to a wide variety of online resources. To appeal to this current generation of learners, educators must embrace the use of technology. However, educators must balance newer, novel technologies with traditional methods to achieve the best learning outcomes. Therefore, we aimed to review several papers useful for faculty members wishing to incorporate technology into instructional design. Methods We identified a broad list of papers relevant to teaching and learning with technology within the online discussions of the Academic Life in Emergency Medicine (ALiEM) Faculty Incubator. This list was augmented with suggestions by a guest expert (BT) and an open call on Twitter (tagged with the #meded and #FOAMed hashtags) yielding 24 papers. We then conducted a modified three-round Delphi process within the authorship group, including junior and senior faculty members, to identify the most impactful papers. Results We pared the list of 24 papers to five that were most highly rated. Two were research papers and three were commentaries or editorials. The authorship group reviewed and summarized these papers with specific consideration to their value to junior educators and faculty developers. Conclusion This is a key reading list for junior faculty members and faculty developers interested in teaching with technology. The commentary contextualizes the importance of these papers for medical educators, to optimize use of technology in their teaching or incorporate into faculty development. PMID:28611895

Yield impact for wafer shape misregistration-based binning for overlay APC diagnostic enhancement

NASA Astrophysics Data System (ADS)

Jayez, David; Jock, Kevin; Zhou, Yue; Govindarajulu, Venugopal; Zhang, Zhen; Anis, Fatima; Tijiwa-Birk, Felipe; Agarwal, Shivam

2018-03-01

The importance of traditionally acceptable sources of variation has started to become more critical as semiconductor technologies continue to push into smaller technology nodes. New metrology techniques are needed to pursue the process uniformity requirements needed for controllable lithography. Process control for lithography has the advantage of being able to adjust for cross-wafer variability, but this requires that all processes are close in matching between process tools/chambers for each process. When this is not the case, the cumulative line variability creates identifiable groups of wafers1 . This cumulative shape based effect is described as impacting overlay measurements and alignment by creating misregistration of the overlay marks. It is necessary to understand what requirements might go into developing a high volume manufacturing approach which leverages this grouping methodology, the key inputs and outputs, and what can be extracted from such an approach. It will be shown that this line variability can be quantified into a loss of electrical yield primarily at the edge of the wafer and proposes a methodology for root cause identification and improvement. This paper will cover the concept of wafer shape based grouping as a diagnostic tool for overlay control and containment, the challenges in implementing this in a manufacturing setting, and the limitations of this approach. This will be accomplished by showing that there are identifiable wafer shape based signatures. These shape based wafer signatures will be shown to be correlated to overlay misregistration, primarily at the edge. It will also be shown that by adjusting for this wafer shape signal, improvements can be made to both overlay as well as electrical yield. These improvements show an increase in edge yield, and a reduction in yield variability.

Innovative technologies for asbestos removal, treatment and recycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bossart, S.J.; Kasper, K.M.

This paper will provide an overview of the Office of Science and Technology`s Decontamination and Decommissioning (D & D) Focus Area`s investment in development and demonstration of innovative technologies for asbestos treatment, removal and recycle. The paper will cover the market opportunities for asbestos abatement, major regulations covering asbestos abatement, baseline technologies used by DOE for removal of asbestos, asbestos-related technology needs submitted by DOE`s Site Technology Coordinating Groups, and asbestos development and demonstration projects supported by the D & D Focus Area and other organizations. Based on the Environmental Management Integrated Database, there are about five million cubic feetmore » of asbestos within the DOE Weapons Complex that will be abated by 2030. DOE has three main forms of asbestos: transite used in building construction, thermal pipe insulation, and floor tile. The D & D Focus Area has or is supporting three projects in asbestos removal, and three projects on destruction of asbestos fibers by chemical and thermal treatment. In asbestos removal, the D & D Focus Area is investigating a robot which removes asbestos insulation from pipes; a laser cutting technology which melts asbestos fibers while cutting insulated pipes; and a vacuum system which removes thermal insulation sandwiched between panels of transite. For destruction of asbestos fibers, the D & D Focus Area is supporting development and demonstration of a trailer-mounted process which destroys asbestos fibers by a combination of thermal and chemical treatment; a three-step process which removes organic and radioactive contaminants from the asbestos prior to decomposing the asbestos fibers by acid attack; and an in situ chemical treatment process to convert asbestos fibers into a non-regulated material.« less

Technology Transfer: Marketing Tomorrow's Technology

NASA Technical Reports Server (NTRS)

Tcheng, Erene

1995-01-01

The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers all of the research efforts conducted at Langley, my studies with TAG were ab!e to provide me an excellent overview of Langley's contribution to the aeronautics industry.

Thermal imaging as a smartphone application: exploring and implementing a new concept

NASA Astrophysics Data System (ADS)

Yanai, Omer

2014-06-01

Today's world is going mobile. Smartphone devices have become an important part of everyday life for billions of people around the globe. Thermal imaging cameras have been around for half a century and are now making their way into our daily lives. Originally built for military applications, thermal cameras are starting to be considered for personal use, enabling enhanced vision and temperature mapping for different groups of professional individuals. Through a revolutionary concept that turns smartphones into fully functional thermal cameras, we have explored how these two worlds can converge by utilizing the best of each technology. We will present the thought process, design considerations and outcome of our development process, resulting in a low-power, high resolution, lightweight USB thermal imaging device that turns Android smartphones into thermal cameras. We will discuss the technological challenges that we faced during the development of the product, and what are the system design decisions taken during the implementation. We will provide some insights we came across during this development process. Finally, we will discuss the opportunities that this innovative technology brings to the market.

Changing the way employee benefit communications are produced: outsourcing, a more efficient, less costly process.

PubMed

Herren, K

1995-12-01

Outsourcing may offer employers an efficient, cost-effective way to produce employee benefit communications. It offers a way to utilize the latest technology to produce personalized benefit statements or to target an announcement of benefit changes to a specific group of employees.

Activities of the Remote Sensing Information Sciences Research Group

NASA Technical Reports Server (NTRS)

Estes, J. E.; Botkin, D.; Peuquet, D.; Smith, T.; Star, J. L. (Principal Investigator)

1984-01-01

Topics on the analysis and processing of remotely sensed data in the areas of vegetation analysis and modelling, georeferenced information systems, machine assisted information extraction from image data, and artificial intelligence are investigated. Discussions on support field data and specific applications of the proposed technologies are also included.

To the Critics, the Spoils.

ERIC Educational Resources Information Center

Harris, Rick

1995-01-01

In a partnership between several tool companies and vocational high schools, students in construction technology classes give new products a fair and rigorous workout at a fraction of the cost of focus groups. The process allows companies to expose their products to students who, in turn, provide critical evaluation of the tools. (JOW)

Foundations for a Team Oriented Curriculum

ERIC Educational Resources Information Center

Neal, Brandi; Martz, Ben

2016-01-01

The business world today values collaboration and team work skills such as those found in the area of project management, business process reengineering, quality circles, etc. In response, the use of group projects permeates many curricula today with varying consequences and levels of success. Technology claims to enhance collaboration in…

TQL, A Case Study of Implementation into the Operational Fleet

DTIC Science & Technology

1992-06-18

Methods, Poka - Yoke (mistake proofing of a process), Total Preventive Maintenance, and Group Technology and Quality Circles. All of these methods can be...Thomas, What Every Manager Should Know About Quality, 1991, Marcel Dekker,inc. 9. Poka - Yoke , 1987, Productivity Press. 67 B. STATISTICAL METHODS: 1

The Educational and Professional Trajectories of Working Young People

ERIC Educational Resources Information Center

Cherednichenko, G. A.

2012-01-01

The dynamism of social processes, the development of technologies, and the modernization of industrial production require raising the education and qualifications of blue-collar workers, particularly working young people. This accounts for the focus on problems of that group's formation, their integration into society, their acquisition and…

Maine Leading Initiative for Multistate Tech. Buys

ERIC Educational Resources Information Center

Cavanagh, Sean

2013-01-01

A group of states has joined forces to arrange the purchase of an unusually comprehensive set of educational-technology devices and services, in a compact that could foreshadow other cooperative efforts by state and local governments attempting to turn the digital-procurement process to their advantage. The initial partners in the multistate…

Constant Change: The Ever-Evolving Personal Learning Environment

ERIC Educational Resources Information Center

Torres Kompen, Ricardo; Monguet, Josep Ma.; Brigos, Miguel

2015-01-01

There are several definitions for the term "personal learning environment" (PLE); in this article, PLE refers to a group of web technologies, with various degrees of integration and interaction, that helps users and learners manage the flow of information that relates to the learning process, the creation of knowledge, and the…

A Kid-Built Classroom Library. Curriculum Boosters. Technology.

ERIC Educational Resources Information Center

Cooper, Laurie K.

1994-01-01

Elementary students can help turn the classroom book collection into a well-organized library using the classroom computer. In the process, they get practice in cooperative-learning groups as they work with both electronic and card catalogs. The article explains how to use computers to create an electronic catalog. (SM)

Location negative priming effects in children with developmental dyslexia: An event-related potential study.

PubMed

Ma, Yujun; Wang, Enguo; Yuan, Tian; Zhao, Guo Xiang

2016-08-01

As the reading process is inseparable from working memory, inhibition, and other higher cognitive processes, the deep cognitive processing defects that are associated with dyslexia may be due to defective distraction inhibition systems. In this study, we used event-related potential technology to explore the source of negative priming effects in children with developmental dyslexia and in a group of healthy children for comparison. We found that the changes in the average response times in the negative priming and control conditions were consistent across the two groups, while the negative priming effects differed significantly between the groups. The magnitude of the negative priming effect was significantly different between the two groups, with the magnitude being significantly higher in the control group than it was in the developmental dyslexia group. These results indicate that there are deficits in distraction inhibition in children with developmental dyslexia. In terms of the time course of processing, inhibition deficits in the dyslexia group appeared during early-stage cognition selection and lasted through the response selection phase. Regarding the cerebral cortex locations, early-stage cognition selection was mainly located in the parietal region, while late-stage response selection was mainly located in the frontal and central regions. The results of our study may help further our understanding of the intrinsic causes of developmental dyslexia. Copyright © 2016 Elsevier Ltd. All rights reserved.

Safety and Security Interface Technology Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

Safety and Security Interface Technology Initiative Mr. Kevin J. Carroll Dr. Robert Lowrie, Dr. Micheal Lehto BWXT Y12 NSC Oak Ridge, TN 37831 865-576-2289/865-241-2772 carrollkj@y12.doe.gov Work Objective. Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. “Supporting Excellence in Operations Through Safety Analysis,” (workshop theme)more » includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is “Safeguards/Security Integration with Safety.” This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis/Security Documentation Integration, Configuration Control, and development of a shared ‘tool box’ of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated implementation plan includes: (1) A recommended process for handling the documentation of the security and safety disciplines, including an appropriate change control process and participation by all stakeholders. (2) A means to package security systems with sufficient information to help expedite the flow of that system through the process. In addition, a means to share successes among sites, to include information and safety basis to the extent such information is transportable. (3) Identification of key security systems and associated essential security elements being installed and an arrangement for the sites installing these systems to host an appropriate team to review a specific system and determine what information is exportable. (4) Identification of the security systems’ essential elements and appropriate controls required for testing of these essential elements in the facility. (5) The ability to help refine and improve an agreed to control set at the manufacture stage.« less

[Consensus conferences in Israel--a collaborative model for national policy making].

PubMed

Tal, Orna; Oberlander, Shira; Siebzehner, Miri I

2014-07-01

The determination of an integrated national policy on controversial issues is a challenge for health systems worldwide. A common method to reach agreements for national policies in different countries throughout the world is group discussion that involves all stakeholders. A structured model of discussion on medical technologies started in the 1970s, mostly in North America, spreading to Europe and in the last decade also crossed borders to India, South America and Israel. Public discussion in the format of a consensus conference is a complex process that includes a thorough literature review for technology assessment, combining academic information using a technique of close consultation with experts, extensive panel discussion and dialogue with representatives of the public. At the end of the process a broad consensus is determined facilitating national-level policy implementation. The multiple factors involved, the issues addressed, the nature of the health system where the intended results will be applied, as well as political and social characteristics, produce variations among different countries. Therefore, this process requires flexibility in adjusting the classic model according to the awakening needs. The advantages of this method include encouraging the appropriate utilization of existing technologies, contemporary assessment by leading experts, aligning between all involved parties, public sharing and more. The initial model of the consensus conference was implemented in an orderly, systematic, structured process which allowed broad discussion, and many factors for thorough preparation. The disadvantages are its complexity, length and cost. In order to cope with the dynamics of the health system in israel, forcing policymakers to make decisions in real time, parts of the model were adjusted to address the issues arising in the system. Hence, a new process was developed--a derivative of the original Israeli model, with an emphasis on professional reviews, group discussion, and involvement of leading factors in the system. The participation of patients and the public in the process requires a thorough examination.

Selection criteria and facilitation training for the study of groupware

NASA Technical Reports Server (NTRS)

Robichaux, Barry P.

1993-01-01

Computer support for planning and decision making groups is a growing trend in the 90s. Groupware is a name often applied to group software and has been defined as 'computer-based systems that support groups engaged in a common task (or goal) and that provide an interface to a shared environment'. Unlike most single-user software, groupware assists user groups in their collaboration, coordination, and communication efforts. This paper focuses on groupware to support the meeting process. These systems are often called group decision support systems (GDSS), electronic meeting systems (EMS), or group support systems (GSS). The term 'meeting support groupware' is used here to include any computer-based system to support meetings. In order to understand this technology, one must first understand groups, what they do and the problems they face, and groupware, a wide range of technology to support group work. Guidelines for selecting groups for study as part of an overall research plan are provided in this document. These were taken from the literature and from persons for whom the information in this paper was targeted. Also, guidelines for facilitation training are discussed. Familiarity with known and accepted techniques are the principle duties of the facilitator and any form of training must include practice in using these techniques.

Differences in influence patterns between groups predicting the adoption of a solar disinfection technology for drinking water in Bolivia.

PubMed

Moser, Stephanie; Mosler, Hans-Joachim

2008-08-01

The lack of safe drinking water is one of the major problems faced by developing countries. The consequences of contaminated water are diseases such as diarrhea, one of the main causes of infant mortality. Because of its simplicity, solar water-disinfection technology provides a good way of treating water at the household level. Despite its obvious advantages and considerable promotional activities, this innovation has had rather a slow uptake. We conducted a field survey in which 644 households in Bolivia were interviewed in order to gain insights on motivations that resulted in adopting the technology. The aim was to examine possible differences in the predictors for adopting this technology during the diffusion process using the theory of innovation diffusion. Our findings indicate that early adoption was predicted by increased involvement in the topic of drinking water and that adoption in the middle of the diffusion process was predicted by increased involvement by opinion leaders and by recognition of a majority who supported the technology. Finally, late adoption was predicted by recognition that a majority had already adopted. Suggestions for future promotional strategies are outlined.

Multi-criteria development and incorporation into decision tools for health technology adoption.

PubMed

Poulin, Paule; Austen, Lea; Scott, Catherine M; Waddell, Cameron D; Dixon, Elijah; Poulin, Michelle; Lafrenière, René

2013-01-01

When introducing new health technologies, decision makers must integrate research evidence with local operational management information to guide decisions about whether and under what conditions the technology will be used. Multi-criteria decision analysis can support the adoption or prioritization of health interventions by using criteria to explicitly articulate the health organization's needs, limitations, and values in addition to evaluating evidence for safety and effectiveness. This paper seeks to describe the development of a framework to create agreed-upon criteria and decision tools to enhance a pre-existing local health technology assessment (HTA) decision support program. The authors compiled a list of published criteria from the literature, consulted with experts to refine the criteria list, and used a modified Delphi process with a group of key stakeholders to review, modify, and validate each criterion. In a workshop setting, the criteria were used to create decision tools. A set of user-validated criteria for new health technology evaluation and adoption was developed and integrated into the local HTA decision support program. Technology evaluation and decision guideline tools were created using these criteria to ensure that the decision process is systematic, consistent, and transparent. This framework can be used by others to develop decision-making criteria and tools to enhance similar technology adoption programs. The development of clear, user-validated criteria for evaluating new technologies adds a critical element to improve decision-making on technology adoption, and the decision tools ensure consistency, transparency, and real-world relevance.

IMPROVING THE EFFECTIVENESS AND EFFICIENCY OF EVIDENCE PRODUCTION FOR HEALTH TECHNOLOGY ASSESSMENT.

PubMed

Facey, Karen; Henshall, Chris; Sampietro-Colom, Laura; Thomas, Sarah

2015-01-01

Health Technology Assessment (HTA) needs to address the challenges posed by high cost, effective technologies, expedited regulatory approaches, and the opportunities provided by collaborative real-world evaluation of technologies. The Health Technology Assessment International (HTAi) Policy Forum met to consider these issues and the implications for evidence production to inform HTA. This paper shares their discussion to stimulate further debate. A background paper, presentations, group discussions, and stakeholder role play at the 2015 HTAi Policy Forum meeting informed this paper. HTA has an important role to play in helping improve evidence production and ensuring that the health service is ready to adopt effective technologies. It needs to move from simply informing health system decisions to also working actively to align stakeholder expectations about realistic evidence requirements. Processes to support dialogue over the health technology life cycle need to be developed that are mindful of limited resources, operate across jurisdictions and learn from past processes. Collaborations between health technology developers and health systems in different countries should be encouraged to develop evidence that will inform decision making. New analytical techniques emerging for real-world data should be harnessed to support modeling for HTA. A paradigm shift (to "Health Innovation System 2.0") is suggested where HTA adopts a more central, proactive role to support alignment within and amongst stakeholders over the whole life cycle of the technology. This could help ensure that evidence production is better aligned with patient and health system needs and so is more effective and efficient.

The effectiveness of technology-based patient education on self-reported deprivation of liberty among people with severe mental illness: a randomized controlled trial.

PubMed

Kuosmanen, Lauri; Välimäki, Maritta; Joffe, Grigori; Pitkänen, Anneli; Hätönen, Heli; Patel, Anita; Knapp, Martin

2009-01-01

Deprivation of liberty (DL) in psychiatric inpatient care is common worldwide. As liberty is a central element of patients' rights, there is a need to develop most effective methods supporting patients' personal liberty. The article presents initial results from a study to determine the effectiveness of an information technology (IT)-based patient education programme on patients' experiences of being deprived of their liberty during their in-hospital stay. An overall sample of 311 patients with schizophrenia spectrum psychosis was randomized into three groups: an intervention group with needs-based computerized patient education, a patient education group with conventional education and a control group with standard care. Data on the general experience of DL were collected at baseline and during the patient discharge process. In general, all patients experienced less DL at the time of their discharge. The change in patients' experiences of their DL did not differ statistically between the three groups. Male patients in the standard care group were significantly more likely to drop out of the study than female patients. Although technology-based patient education was not found to be superior to other approaches, we did not find any reason to inhibit its utilization in patient care among persons with severe mental health problems. From the healthcare organizations' perspective, a cost-effectiveness analysis is needed, as the IT education was slightly more time-consuming.

Training Older Adults to Use Tablet Computers: Does It Enhance Cognitive Function?

PubMed

Chan, Micaela Y; Haber, Sara; Drew, Linda M; Park, Denise C

2016-06-01

Recent evidence shows that engaging in learning new skills improves episodic memory in older adults. In this study, older adults who were computer novices were trained to use a tablet computer and associated software applications. We hypothesize that sustained engagement in this mentally challenging training would yield a dual benefit of improved cognition and enhancement of everyday function by introducing useful skills. A total of 54 older adults (age 60-90) committed 15 hr/week for 3 months. Eighteen participants received extensive iPad training, learning a broad range of practical applications. The iPad group was compared with 2 separate controls: a Placebo group that engaged in passive tasks requiring little new learning; and a Social group that had regular social interaction, but no active skill acquisition. All participants completed the same cognitive battery pre- and post-engagement. Compared with both controls, the iPad group showed greater improvements in episodic memory and processing speed but did not differ in mental control or visuospatial processing. iPad training improved cognition relative to engaging in social or nonchallenging activities. Mastering relevant technological devices have the added advantage of providing older adults with technological skills useful in facilitating everyday activities (e.g., banking). This work informs the selection of targeted activities for future interventions and community programs. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America.

Training Older Adults to Use Tablet Computers: Does It Enhance Cognitive Function?

PubMed Central

Chan, Micaela Y.; Haber, Sara; Drew, Linda M.; Park, Denise C.

2016-01-01

Purpose of the Study: Recent evidence shows that engaging in learning new skills improves episodic memory in older adults. In this study, older adults who were computer novices were trained to use a tablet computer and associated software applications. We hypothesize that sustained engagement in this mentally challenging training would yield a dual benefit of improved cognition and enhancement of everyday function by introducing useful skills. Design and Methods: A total of 54 older adults (age 60-90) committed 15 hr/week for 3 months. Eighteen participants received extensive iPad training, learning a broad range of practical applications. The iPad group was compared with 2 separate controls: a Placebo group that engaged in passive tasks requiring little new learning; and a Social group that had regular social interaction, but no active skill acquisition. All participants completed the same cognitive battery pre- and post-engagement. Results: Compared with both controls, the iPad group showed greater improvements in episodic memory and processing speed but did not differ in mental control or visuospatial processing. Implications: iPad training improved cognition relative to engaging in social or nonchallenging activities. Mastering relevant technological devices have the added advantage of providing older adults with technological skills useful in facilitating everyday activities (e.g., banking). This work informs the selection of targeted activities for future interventions and community programs. PMID:24928557

High resolution image processing on low-cost microcomputers

NASA Technical Reports Server (NTRS)

Miller, R. L.

1993-01-01

Recent advances in microcomputer technology have resulted in systems that rival the speed, storage, and display capabilities of traditionally larger machines. Low-cost microcomputers can provide a powerful environment for image processing. A new software program which offers sophisticated image display and analysis on IBM-based systems is presented. Designed specifically for a microcomputer, this program provides a wide-range of functions normally found only on dedicated graphics systems, and therefore can provide most students, universities and research groups with an affordable computer platform for processing digital images. The processing of AVHRR images within this environment is presented as an example.

The effects of inquiry instruction on student learning in technology-based undergraduate chemistry laboratories

NASA Astrophysics Data System (ADS)

Meade, Karen Marie

The purpose of this study was to identify conceptual and attitudinal effects of inquiry learning in technology-based undergraduate chemistry laboratories. There were 428 participants who were registered in general chemistry laboratory at the University of Iowa in the Spring of 2002. Conceptual and attitudinal pretest and posttest results were quantitative in nature. Qualitative results were collected from questionnaires and focus groups. Quantitative data were analyzed using a repeated measures analysis of variance to identify differences between treatment groups. A high-inquiry treatment group was open-ended and required student decisions regarding data collection, data representation, and interpretation. The low-inquiry treatment involved collaboration and traditional learning strategies. Major findings of this study were: (1) Pretest to posttest conceptual gains were significant for both treatment groups. Low-inquiry students performed significantly better on exploration questions than high-inquiry students. (2) Process skills developed at higher levels for high-inquiry students than low-inquiry students. (3) Positive attitudes decreased significantly for all students from pretest to posttest. More favorable attitudes toward science enjoyment and the ability to do well in science were found for high-inquiry students. More favorable attitudes toward science enjoyment and the ability to do well in science were found for low-inquiry males and high-inquiry females. (4) More favorable attitudes toward the nature of science caused by use of the learning cycle were reported by high-inquiry students. (5) Low-inquiry students reported more favorable attitudes toward technologies in the laboratory than did high-inquiry students. Favorable attitudes toward the use of infrared spectrometers and unfavorable attitudes toward the use of pH meters were reported by both treatment groups. (6) More formal reasoning skills were reported by high-inquiry students. Both groups reported that looking for patterns was a common theme in the laboratories. Hypotheses were reported as rarely used by both treatment groups. These findings are significant because they indicate that inquiry activities positively affect attitudes toward science, gender equality, and contribute to the development of formal reasoning skills and process skills.

Digital Learning As Enhanced Learning Processing? Cognitive Evidence for New insight of Smart Learning.

PubMed

Di Giacomo, Dina; Ranieri, Jessica; Lacasa, Pilar

2017-01-01

Large use of technology improved quality of life across aging and favoring the development of digital skills. Digital skills can be considered an enhancing to human cognitive activities. New research trend is about the impact of the technology in the elaboration information processing of the children. We wanted to analyze the influence of technology in early age evaluating the impact on cognition. We investigated the performance of a sample composed of n. 191 children in school age distributed in two groups as users: high digital users and low digital users. We measured the verbal and visuoperceptual cognitive performance of children by n. 8 standardized psychological tests and ad hoc self-report questionnaire. Results have evidenced the influence of digital exposition on cognitive development: the cognitive performance is looked enhanced and better developed: high digital users performed better in naming, semantic, visual memory and logical reasoning tasks. Our finding confirms the data present in literature and suggests the strong impact of the technology using not only in the social, educational and quality of life of the people, but also it outlines the functionality and the effect of the digital exposition in early age; increased cognitive abilities of the children tailor digital skilled generation with enhanced cognitive processing toward to smart learning.

Improving Patient Experience and Primary Care Quality for Patients With Complex Chronic Disease Using the Electronic Patient-Reported Outcomes Tool: Adopting Qualitative Methods Into a User-Centered Design Approach.

PubMed

Steele Gray, Carolyn; Khan, Anum Irfan; Kuluski, Kerry; McKillop, Ian; Sharpe, Sarah; Bierman, Arlene S; Lyons, Renee F; Cott, Cheryl

2016-02-18

Many mHealth technologies do not meet the needs of patients with complex chronic disease and disabilities (CCDDs) who are among the highest users of health systems worldwide. Furthermore, many of the development methodologies used in the creation of mHealth and eHealth technologies lack the ability to embrace users with CCDD in the specification process. This paper describes how we adopted and modified development techniques to create the electronic Patient-Reported Outcomes (ePRO) tool, a patient-centered mHealth solution to help improve primary health care for patients experiencing CCDD. This paper describes the design and development approach, specifically the process of incorporating qualitative research methods into user-centered design approaches to create the ePRO tool. Key lessons learned are offered as a guide for other eHealth and mHealth research and technology developers working with complex patient populations and their primary health care providers. Guided by user-centered design principles, interpretive descriptive qualitative research methods were adopted to capture user experiences through interviews and working groups. Consistent with interpretive descriptive methods, an iterative analysis technique was used to generate findings, which were then organized in relation to the tool design and function to help systematically inform modifications to the tool. User feedback captured and analyzed through this method was used to challenge the design and inform the iterative development of the tool. Interviews with primary health care providers (n=7) and content experts (n=6), and four focus groups with patients and carers (n=14) along with a PICK analysis-Possible, Implementable, (to be) Challenged, (to be) Killed-guided development of the first prototype. The initial prototype was presented in three design working groups with patients/carers (n=5), providers (n=6), and experts (n=5). Working group findings were broken down into categories of what works and what does not work to inform modifications to the prototype. This latter phase led to a major shift in the purpose and design of the prototype, validating the importance of using iterative codesign processes. Interpretive descriptive methods allow for an understanding of user experiences of patients with CCDD, their carers, and primary care providers. Qualitative methods help to capture and interpret user needs, and identify contextual barriers and enablers to tool adoption, informing a redesign to better suit the needs of this diverse user group. This study illustrates the value of adopting interpretive descriptive methods into user-centered mHealth tool design and can also serve to inform the design of other eHealth technologies. Our approach is particularly useful in requirements determination when developing for a complex user group and their health care providers.

Myoelectric signal processing for control of powered limb prostheses.

PubMed

Parker, P; Englehart, K; Hudgins, B

2006-12-01

Progress in myoelectric control technology has over the years been incremental, due in part to the alternating focus of the R&D between control methodology and device hardware. The technology has over the past 50 years or so moved from single muscle control of a single prosthesis function to muscle group activity control of multifunction prostheses. Central to these changes have been developments in the means of extracting information from the myoelectric signal. This paper gives an overview of the myoelectric signal processing challenge, a brief look at the challenge from an historical perspective, the state-of-the-art in myoelectric signal processing for prosthesis control, and an indication of where this field is heading. The paper demonstrates that considerable progress has been made in providing clients with useful and reliable myoelectric communication channels, and that exciting work and developments are on the horizon.

Automatic mine detection based on multiple features

NASA Astrophysics Data System (ADS)

Yu, Ssu-Hsin; Gandhe, Avinash; Witten, Thomas R.; Mehra, Raman K.

2000-08-01

Recent research sponsored by the Army, Navy and DARPA has significantly advanced the sensor technologies for mine detection. Several innovative sensor systems have been developed and prototypes were built to investigate their performance in practice. Most of the research has been focused on hardware design. However, in order for the systems to be in wide use instead of in limited use by a small group of well-trained experts, an automatic process for mine detection is needed to make the final decision process on mine vs. no mine easier and more straightforward. In this paper, we describe an automatic mine detection process consisting of three stage, (1) signal enhancement, (2) pixel-level mine detection, and (3) object-level mine detection. The final output of the system is a confidence measure that quantifies the presence of a mine. The resulting system was applied to real data collected using radar and acoustic technologies.

Process change evaluation framework for allogeneic cell therapies: impact on drug development and commercialization.

PubMed

Hassan, Sally; Huang, Hsini; Warren, Kim; Mahdavi, Behzad; Smith, David; Jong, Simcha; Farid, Suzanne S

2016-04-01

Some allogeneic cell therapies requiring a high dose of cells for large indication groups demand a change in cell expansion technology, from planar units to microcarriers in single-use bioreactors for the market phase. The aim was to model the optimal timing for making this change. A development lifecycle cash flow framework was created to examine the implications of process changes to microcarrier cultures at different stages of a cell therapy's lifecycle. The analysis performed under assumptions used in the framework predicted that making this switch earlier in development is optimal from a total expected out-of-pocket cost perspective. From a risk-adjusted net present value view, switching at Phase I is economically competitive but a post-approval switch can offer the highest risk-adjusted net present value as the cost of switching is offset by initial market penetration with planar technologies. The framework can facilitate early decision-making during process development.

Significances of Multimedia Technologies Training

NASA Astrophysics Data System (ADS)

Zhang, Fulei

The use of multimedia technologies in education has enabled teachers to simulate final outcomes and assist s-tudents in applying knowledge learned from textbooks, thereby compensating for the deficiency of traditional teach- ing methods. It is important to examine how effective these technologies are in practical use. This study developed online learning-teaching resource platforms using Flash multimedia, providing interactive and integrated features in an easy-to-use user interface, in order to discuss Computer-Aided Drawing (CAD). The study utilized a teaching experiment with a non-equivalent pretest-posttest control group design to test and discuss students' professional cognition, operating skill cognition, and level of learning satisfaction during the learning process. No significant differences emerged between the groups in regards to professional cognition or operation skills cognition. However, a significant difference in learning satisfaction was noted, indicating that the coursework with multimedia Flash produced greater satisfaction than with traditional learning methods. Results are explained in detail and recommendations for further research provided.

Lessons learned in deploying software estimation technology and tools

NASA Technical Reports Server (NTRS)

Panlilio-Yap, Nikki; Ho, Danny

1994-01-01

Developing a software product involves estimating various project parameters. This is typically done in the planning stages of the project when there is much uncertainty and very little information. Coming up with accurate estimates of effort, cost, schedule, and reliability is a critical problem faced by all software project managers. The use of estimation models and commercially available tools in conjunction with the best bottom-up estimates of software-development experts enhances the ability of a product development group to derive reasonable estimates of important project parameters. This paper describes the experience of the IBM Software Solutions (SWS) Toronto Laboratory in selecting software estimation models and tools and deploying their use to the laboratory's product development groups. It introduces the SLIM and COSTAR products, the software estimation tools selected for deployment to the product areas, and discusses the rationale for their selection. The paper also describes the mechanisms used for technology injection and tool deployment, and concludes with a discussion of important lessons learned in the technology and tool insertion process.

Technical Transformation of Biodefense Vaccines

PubMed Central

Lu, Shan; Wang, Shixia

2013-01-01

Biodefense vaccines are developed against a diverse group of pathogens. Vaccines were developed for some of these pathogens a long time ago but they are facing new challenges to move beyond the old manufacturing technologies. New vaccines to be developed against other pathogens have to determine whether to follow traditional vaccination strategies or to seek new approaches. Advances in basic immunology and recombinant DNA technology have fundamentally transformed the process of formulating a vaccine concept, optimizing protective antigens, and selecting the most effective vaccine delivery approach for candidate biodefense vaccines. PMID:19837293

Structural dynamics technology research in NASA: Perspective on future needs

NASA Technical Reports Server (NTRS)

1979-01-01

The perspective of a NASA ad hoc study group on future research needs in structural dynamics within the aerospace industry is presented. The common aspects of the design process across the industry are identified and the role of structural dynamics is established through a discussion of various design considerations having their basis in structural dynamics. The specific structural dynamics issues involved are identified and assessed as to their current technological status and trends. Projections of future requirements based on this assessment are made and areas of research to meet them are identified.

The Building Bridges Project: Involving Older Adults in the Design of a Communication Technology to Support Peer-to-Peer Social Engagement

NASA Astrophysics Data System (ADS)

Wherton, Joseph; Prendergast, David

There are a variety of factors that can lead to social isolation and loneliness in old age, including decline in physical and mental health, as well as change to social environment. The Building Bridges project explores how communication technology can help older adults remain socially connected. This paper will first provide an overview of a prototype communication system designed to support peer-to-peer group interaction. A description of the user-centered design process will be provided to demonstrate the importance of involving older adults at the earliest stages. The implications for designing new technology for older adults are discussed.

Machine intelligence and robotics: Report of the NASA study group. Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

A brief overview of applications of machine intelligence and robotics in the space program is given. These space exploration robots, global service robots to collect data for public service use on soil conditions, sea states, global crop conditions, weather, geology, disasters, etc., from Earth orbit, space industrialization and processing technologies, and construction of large structures in space. Program options for research, advanced development, and implementation of machine intelligence and robot technology for use in program planning are discussed. A vigorous and long-range program to incorporate and keep pace with state of the art developments in computer technology, both in spaceborne and ground-based computer systems is recommended.

Compound management beyond efficiency.

PubMed

Burr, Ian; Winchester, Toby; Keighley, Wilma; Sewing, Andreas

2009-06-01

Codeveloping alongside chemistry and in vitro screening, compound management was one of the first areas in research recognizing the need for efficient processes and workflows. Material management groups have centralized, automated, miniaturized and, importantly, found out what not to do with compounds. While driving down cost and improving quality in storage and processing, researchers still face the challenge of interfacing optimally with changing business processes, in screening groups, and with external vendors and focusing on biologicals in many companies. Here we review our strategy to provide a seamless link between compound acquisition and screening operations and the impact of material management on quality of the downstream processes. Although this is driven in part by new technologies and improved quality control within material management, redefining team structures and roles also drives job satisfaction and motivation in our teams with a subsequent positive impact on cycle times and customer feedback.

Characterization and Evaluation of Lunar Regolith and Simulants

NASA Technical Reports Server (NTRS)

Cross, William M.; Murphy, Gloria A.

2010-01-01

A NASA-ESMD (National Aeronautics and Space Administration-Exploration Systems Mission Directorate) funded senior design project "Mineral Separation Technology for Lunar Regolith Simulant Production" is directed toward designing processes to produce Simulant materials as close to lunar regolith as possible. The eight undergraduate (junior and senior) students involved are taking a systems engineering design approach to identifying the most pressing concerns in simulant needs, then designing subsystems and processing strategies to meet these needs using terrestrial materials. This allows the students to, not only learn the systems engineering design process, but also, to make a significant contribution to an important NASA ESMD project. This paper will primarily be focused on the implementation aspect, particularly related to the systems engineering process, of this NASA EMSD senior design project. In addition comparison of the NASA ESMD group experience to the implementation of systems engineering practices into a group of existing design projects is given.

Application of ANP and DEMATEL to evaluate the decision-making of municipal solid waste management in Metro Manila.

PubMed

Tseng, Ming-Lang

2009-09-01

A municipal solid waste management (MSW) expert group was consulted in order to mirror how government officials might reach an effective solution regarding municipal solid waste management in Metro Manila. A critical issue regarding this is how the expert group can better evaluate and select a favorable MSW management solution using a series of criteria. MSW management solution selection is a multiple criteria decision-making (MCDM) problem, which requires the consideration of a large number of complex criteria. A robust MCDM method should consider the interactions among these criteria. The analytic network process (ANP) is a relatively new MCDM method which can deal with all kinds of interactions systematically. The Decision Making Trial and Evaluation Laboratory (DEMATEL) not only can convert the relations between cause and effect of criteria into a structural model, but also can be used as a way to handle the inner dependences within a set of criteria. Hence, this paper applies an effective solution based on a combined ANP and DEMATEL method to assist the expert group evaluating different MSW management solutions. According to the results, the best solution is for each city to have its own type of thermal process technology and resource recovery facility before landfill rather than entering a joint venture with enterprises or going into build-operate-transfer projects in order to be able to construct thermal process technologies and resource recovery facilities.

Administrative and Technical Support for the U.S. Army Medical Research and Development Command Joint Working Group on Medical Chemical Defense

DTIC Science & Technology

1989-08-01

microproces;qor databaAing systems for monitoring project and contract reports and program technology trans. fers, coordinating and providing administratIvo ...The JWGD 3 annual planning process generally included: - Program review by the JWGD’ membership at quarterly meetings, which consisted of the review...Office developed the program planning and budget documents associated with the planning process outlined above. Program project databases and

The Effect of Guided-Inquiry Instruction on 6th Grade Turkish Students' Achievement, Science Process Skills, and Attitudes Toward Science

NASA Astrophysics Data System (ADS)

Koksal, Ela Ayse; Berberoglu, Giray

2014-01-01

The purpose of this study is to investigate the effectiveness of guided-inquiry approach in science classes over existing science and technology curriculum in developing content-based science achievement, science process skills, and attitude toward science of grade level 6 students in Turkey. Non-equivalent control group quasi-experimental design was used to investigate the treatment effect. There were 162 students in the experimental group and 142 students in the control group. Both the experimental and control group students took the Achievement Test in Reproduction, Development, and Growth in Living Things (RDGLT), Science Process Skills Test, and Attitudes Toward Science Questionnaire, as pre-test and post-test. Repeated analysis of variance design was used in analyzing the data. Both the experimental and control group students were taught in RDGLT units for 22 class hours. The results indicated the positive effect of guided-inquiry approach on the Turkish students' cognitive as well as affective characteristics. The guided inquiry enhanced the experimental group students' understandings of the science concepts as well as the inquiry skills more than the control group students. Similarly, the experimental group students improved their attitudes toward science more than the control group students as a result of treatment. The guided inquiry seems a transition between traditional teaching method and student-centred activities in the Turkish schools.

QWIP development status at Thales Research and Technology

NASA Astrophysics Data System (ADS)

Costard, Eric; Nedelcu, Alexandru; Marcadet, Xavier; Belhaire, Eric; Bois, Philippe

2006-05-01

Standard GaAs/AlGaAs Quantum Well Infrared Photodetectors (QWIP) are now seriously considered as a technological choice for the 3 rd generation of thermal imagers. Since 2001, the THALES Group has been manufacturing sensitive arrays using QWIP technology based on AsGa techniques through THALES Research and Technology Laboratory. This QWIP technology allows the realisation of large staring arrays for Thermal Imagers (TI) working in the Infrared region of the spectrum. A review of the current QWIP products is presented (LWIR, MWIR and dual color FPAs). The main advantage of this GaAs detector technology is that it is also used for other commercial devices. The duality of this QWIP technology has lead to important improvements over the last ten years and it reaches now an undeniable level of maturity. As a result, the processing of large substrate and a good characteristic uniformity, which are the key parameters for reaching high production yield, are already achieved. Concerning the defective pixels, the main common features are a high operability (above 99.9%) and a low number of clusters including a maximum of 5 dead pixels. Another advantage of this III-V technology is the versatility of the design and processing phases. It allows customizing both the quantum structure and the pixel architecture in order to fulfill the requirements of any specific applications. The spectral response of QWIPs is intrinsically resonant but the quantum structure can be designed for a given detection wavelength window ranging from MWIR, LWIR to VLWIR.

Targeted Technology Transfer to US Independents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald F. Duttlinger; E. Lance Cole

2006-09-29

The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. Coordinated from a Headquarters (HQ) office in Houston, PTTC maintains an active grassroots program executed by 10 Regional Lead Organizations (RLOs) and two satellite offices (Figure 1). Regional Directors interact with domestic oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and cooperative outreach efforts. HQ facilitates inter-regional technology transfer and implements a comprehensive communications program.more » Active volunteers on the National Board and in Producer Advisory Groups (PAGs) in each of the 10 regions focus effort in areas that will create the most impact for domestic producers. Focused effort by dedicated individuals across the country has enabled PTTC to achieve the milestones outlined in Appendix A.« less

Metabolon, Inc.

PubMed

Ryals, John; Lawton, Kay; Stevens, Daniel; Milburn, Michael

2007-07-01

Metabolon is an emerging technology company developing proprietary analytical methods and software for biomarker discovery using metabolomics. The company's aim is to measure all small molecules (<1500 Da) in a biological sample. These small-molecule compounds include biochemicals of cellular metabolism and xenobiotics from diet and environment. Our proprietary mLIMStrade mark system contains advanced metabolomic software and automated data-processing tools that use a variety of data-analysis and quality-control algorithms to convert raw mass-spectrometry data to identified, quantitated compounds. Metabolon's primary focus is a fee-for-service business that exploits this technology for pharmaceutical and biotechnology companies, with additional clients in the consumer goods, cosmetics and agricultural industries. Fee-for-service studies are often collaborations with groups that employ a variety of technologies for biomarker discovery. Metabolon's goal is to develop technology that will automatically analyze any sample for the small-molecule components present and become a standard technology for applications in health and related sciences.

Evolution, Nature, Uses and Issues in the Creation of Local School District Comprehensive Information Systems.

ERIC Educational Resources Information Center

Hathaway, Walter E.

Efficient and convenient comprehensive information systems, long kept from coming into being by a variety of obstacles, are now made possible by the concept of distributive processing and the technology of micro- and mini-computer networks. Such systems can individualize instruction, group students efficiently, cut administrative costs, streamline…

Outsourcing Cataloging, Authority Work, and Physical Processing: A Checklist of Considerations.

ERIC Educational Resources Information Center

Kascus, Marie A., Ed.; Hale, Dawn, Ed.

Due to automation technology, financial restrictions, and resultant downsizing, library managers have increasingly relied on the services of contractors, rather than in-house staff, to accomplish different technical services operations. Contracted services may range from a small project for a selected group of materials to a large project for…

Naval Surface Warfare Center Dahlgren Division Technical Digest. Advanced Materials Technology

DTIC Science & Technology

1993-09-01

of Prins1 2’h3 ated TL glow curve plus a contribution from and Novakov ,12 these peaks are interpreted to the phototransfer process. arise from the... Novakov , T., "X-ray Photoelectron Spectra cist in the Radiation and Molecular Orbital Interpretation of the Valence Dosimetry Group. Since Band

EMERGING TECHNOLOGY BULLETIN: DEVELOPMENT OF A PHOTOTHERMAL DETOXIFICATION UNIT - ENVIRONMENTAL SCIENCE AND ENGINEERING GROUP - UNIVERSITY OF DAYTON RESEARCH INSTITUTE

EPA Science Inventory

The University of Dayton Research Institute has developed a novel photochemical process embodied in a device called a Photothermal Detoxification Unit (PDU) which offers an efficient means of destroying hazardous organic wastes. The PDU, which overcomes the problems of slow react...

Adding to Your Teaching Repertoire: Integrating Action Research into the Lesson Plans

ERIC Educational Resources Information Center

Basham, Matthew J.; Yankowy, Barbara

2015-01-01

As today's students become more technologically savvy, social, and collaborative using social media, there are new and innovative techniques educators can use in the classroom. For example, action research is a newer technique using collaborative group processes, drawing upon the experiences of the individuals to promote positive results. This…

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The International Unconventional Gas Symposium was held on May 14--20, 1995 in Tuscaloosa, Alabama where 52 reports were presented. These reports are grouped in this proceedings under: geology and resources; mine degasification and safety; international developments; reservoir characterization/coal science; and environmental/legal and regulatory. Each report has been processed separately for inclusion in the Energy Science and Technology Database.

Tele-Learning and Distance Learning Re-Engineering Process.

ERIC Educational Resources Information Center

Cruz, Dulce Marcia; de Moraes, Marialice; Barcia, Ricardo Miranda

The adoption and use of new interactive technologies in Distance Education, especially Tele-learning is a growing tendency in the most advanced countries. Nowadays, this tendency is so strong that being interactive is seen as a necessary pre-condition. Some reasons for this are a the growing perceived value of group-working; the popularization of…

Case Study on the Use of Microcomputers in Primary Schools in Bar-le-Duc (France).

ERIC Educational Resources Information Center

Dieschbourg, Robert

1988-01-01

Examines a project which involves the introduction of computer science into elementary schools to create an awareness of data processing as an intellectual, technological, and socio-cultural phenomenon. Concludes that the early computer experience and group work involved in the project enhances student social and psychological development. (GEA)

Evaluation Method for an App Involving Kitchen Activities.

PubMed

Burzagli, Laura; Gaggioli, Andrea

2017-01-01

An app, developed for the national Italian project "Design for all", is evaluated here. This app supports the user in most of his/her cooking activities. The evaluation process integrates different technologies, such as expert interview, cognitive walkthrough and focus group, to consider different aspects that include, but are not limited to, usability and accessibility.

Exploring Student Reflective Practice during a Mathematical Modelling Challenge

ERIC Educational Resources Information Center

Redmond, Trevor; Sheehy, Joanne; Brown, Raymond; Kanasa, Harry

2012-01-01

This paper seeks to compare the reflective writings of two cohorts of students (Year 4/5 and Year 8/9) participating in mathematical modelling challenges. Whilst the reflections of the younger cohort were results oriented, the older cohort's reflections spoke more to the affective domain, group processes, the use of technology and the acquisition…

Knowledge Ecologies in Fragile Online Learning Environments. Research: Information and Communication Technologies

ERIC Educational Resources Information Center

Henning, Elizabeth; Van der Westhuizen, Duan; Diseko, Rabaitse

2005-01-01

This article gives an account of an inquiry into two different postgraduate student groups' ways of engaging with a virtual learning environment. Using a variety of data sources, including learning artefacts, interview data, open-ended qualitative questionnaires and online discussion postings, the inquiry captured processes of engagement of the…

Ion implantation in group III-nitride semiconductors: a tool for doping and defect studies

NASA Astrophysics Data System (ADS)

Zolper, J. C.

1997-06-01

Ion implantation is a flexible process technology for introducing an array of doping or compensating impurities into semiconductors. As the crystal quality of the group III-nitride materials continues to improve, ion implantation is playing an enabling role in exploring new dopant species and device structures. In this paper we review the recent developments in ion implantation processing of these materials with a particular emphasis on how this technology has brought new understanding to this materials system. In particular, the use of ion implantation to characterize impurity luminescence, doping, and compensation in III-nitride materials is reviewed. In addition, we address the nature of implantation induced damage in GaN which demonstrates a very strong resistance to amorphization while at the same time forming damage that is not easily removed by thermal annealing. Finally, we review the coupling of implantation with high temperature rapid thermal annealing to better understand the thermal stability of these materials and the redistribution properties of the common dopant (Si, O, Be, Mg, Ca, and Zn).

76 FR 66327 - Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... Management, Inc., Corporate Service Group, Information Technology (IT) Division, Including On-Site Leased... Information Management, Inc., Corporate Service Group, Information Technology (IT) Division, including on-site... location of Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

Information technology Governance standards on mobile applications for fishing zone based onCobIT 5 Framework in Majene

NASA Astrophysics Data System (ADS)

Palalloi, Irfan Andi; Anwar, Azwar; Syarifuddin

2018-05-01

Most of the activities of Majene regency society dominant as a fisherman, by and large, they work based on the hereditary experiences of their ancestors. This is proven by fishery industry statistic that highest from other industry with 18,30 % in the distribution of the gross regional domestic product. In each specific case, utilization of technology becomes a necessity that plays a key role. Adoption of technology for fishermen groups in use of GPSequipment has frequently committed by the government also non-profit organization go through training and mentoring. Nowadays there are some modern mobile applications has been developed by government agency assist the group of fishermen handy on managing their fishing activity. Such us ZPPI data row from Lapan Satelite, nelpinwas also known as smart fisheries, infrastructure development for space oceanography (indeso). However, all of them carry out of the risk and problems on the user side. One of them related toaccuracy and reliability. In this research, we elaborate technical factor, governance, through Cobit framework and analyze the best practice standardfor implementing the technology. All in all, the result presented of the governance standard on control and implementing technology under customer dimension in information technology governance on the standard process to ensure benefit delivery for implementing mobile application fishery in DKP Majene regency.

KSC-2012-6215

NASA Image and Video Library

2012-11-08

CAPE CANAVERAL, Fla. -- Inside a laboratory in the Engineering Development Laboratory, or EDL, at NASA’s Kennedy Space Center in Florida, research physicist Phil Metzger describes lunar excavators and soil processing technologies to a group of Society of Physics students. About 800 graduate and undergraduate physics students toured Kennedy facilities. A group of about 40 students toured laboratories in the Operations and Checkout Building and the EDL during their visit. The physics students were in Orlando for the 2012 Quadrennial Physics Congress. Photo credit: NASA/Cory Huston

KSC-2012-6216

NASA Image and Video Library

2012-11-08

CAPE CANAVERAL, Fla. -- Inside a laboratory in the Engineering Development Laboratory, or EDL, at NASA’s Kennedy Space Center in Florida, research physicist Phil Metzger describes lunar excavators and soil processing technologies to a group of Society of Physics students. About 800 graduate and undergraduate physics students toured Kennedy facilities. A group of about 40 students toured laboratories in the Operations and Checkout Building and the EDL during their visit. The physics students were in Orlando for the 2012 Quadrennial Physics Congress. Photo credit: NASA/Cory Huston

High performance thermal imaging for the 21st century

NASA Astrophysics Data System (ADS)

Clarke, David J.; Knowles, Peter

2003-01-01

In recent years IR detector technology has developed from early short linear arrays. Such devices require high performance signal processing electronics to meet today's thermal imaging requirements for military and para-military applications. This paper describes BAE SYSTEMS Avionics Group's Sensor Integrated Modular Architecture thermal imager which has been developed alongside the group's Eagle 640×512 arrays to provide high performance imaging capability. The electronics architecture also supprots High Definition TV format 2D arrays for future growth capability.

Development of utility generic functional requirements for electronic work packages and computer-based procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna

The Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative is a step toward a vision of implementing an eWP framework that includes many types of eWPs. This will enable immediate paper-related cost savings in work management and provide a path to future labor efficiency gains through enhanced integration and process improvement in support of the Nuclear Promise (Nuclear Energy Institute 2016). The NEWPER initiative was organized by the Nuclear Information Technology Strategic Leadership (NITSL) group, which is an organization that brings together leaders from the nuclear utility industry and regulatory agencies to address issues involved with information technology usedmore » in nuclear-power utilities. NITSL strives to maintain awareness of industry information technology-related initiatives and events and communicates those events to its membership. NITSL and LWRS Program researchers have been coordinating activities, including joint organization of NEWPER-related meetings and report development. The main goal of the NEWPER initiative was to develop a set of utility generic functional requirements for eWP systems. This set of requirements will support each utility in their process of identifying plant-specific functional and non-functional requirements. The NEWPER initiative has 140 members where the largest group of members consists of 19 commercial U.S. nuclear utilities and eleven of the most prominent vendors of eWP solutions. Through the NEWPER initiative two sets of functional requirements were developed; functional requirements for electronic work packages and functional requirements for computer-based procedures. This paper will describe the development process as well as a summary of the requirements.« less

No-Oven, No-Autoclave Composite Processing

NASA Technical Reports Server (NTRS)

Rauscher, Michael D.

2015-01-01

Very large composite structures, such as those used in NASA's Space Launch System, push the boundaries imposed by current autoclaves. New technology is needed to maintain composite performance and free manufacturing engineers from the restraints of curing equipment size limitations. Recent efforts on a Phase II project by Cornerstone Research Group, Inc. (CRG), have advanced the technology and manufacturing readiness levels of a unique two-part epoxy resin system. Designed for room-temperature infusion of a dry carbon preform, the system includes a no-heat-added cure that delivers 350 F composite performance in a matter of hours. This no-oven, no-autoclave (NONA) composite processing eliminates part-size constraints imposed by infrastructure and lowers costs by increasing throughput and reducing capital-specific, process-flow bottlenecks. As a result of the Phase II activity, NONA materials and processes were used to make high-temperature composite tooling suitable for further production of carbon-epoxy laminates and honeycomb/ sandwich-structure composites with an aluminum core. The technology platform involves tooling design, resin infusion processing, composite part design, and resin chemistry. The various technology elements are combined to achieve a fully cured part. The individual elements are not unusual, but they are combined in such a way that enables proper management of the heat generated by the epoxy resin during cure. The result is a self-cured carbon/ epoxy composite part that is mechanically and chemically stable at temperatures up to 350 F. As a result of the successful SBIR effort, CRG has launched NONA Composites as a spinoff subsidiary. The company sells resin to end users, fabricates finished goods for customers, and sells composite tooling made with NONA materials and processes to composite manufacturers.

Public preferences for engagement in Health Technology Assessment decision-making: protocol of a mixed methods study.

PubMed

Wortley, Sally; Tong, Allison; Lancsar, Emily; Salkeld, Glenn; Howard, Kirsten

2015-07-14

Much attention in recent years has been given to the topic of public engagement in health technology assessment (HTA) decision-making. HTA organizations spend substantial resources and time on undertaking public engagement, and numerous studies have examined challenges and barriers to engagement in the decision-making process however uncertainty remains as to optimal methods to incorporate the views of the public in HTA decision-making. Little research has been done to ascertain whether current engagement processes align with public preferences and to what extent their desire for engagement is dependent on the question being asked by decision-makers or the characteristics of the decision. This study will examine public preferences for engagement in Australian HTA decision-making using an exploratory mixed methods design. The aims of this study are to: 1) identify characteristics about HTA decisions that are important to the public in determining whether public engagement should be undertaken on a particular topic, 2) determine which decision characteristics influence public preferences for the extent, or type of public engagement, and 3) describe reasons underpinning these preferences. Focus group participants from the general community, aged 18-70 years, will be purposively sampled from the Australian population to ensure a wide range of demographic groups. Each focus group will include a general discussion on public engagement as well as a ranking exercise using a modified nominal group technique (NGT). The NGT will inform the design of a discrete choice study to quantitatively assess public preferences for engagement in HTA decision-making. The proposed research seeks to investigate under what circumstances and how the public would like their views and preferences to be considered in health technology assessments. HTA organizations regularly make decisions about when and how public engagement should occur but without consideration of the public's preferences on the method and extent of engagement. This information has the potential to assist decision-makers in tailoring engagement approaches, and may be particularly useful in decisions with potential for conflict where clarification of public values and preferences could strengthen the decision-making process.

Biomass waste-to-energy valorisation technologies: a review case for banana processing in Uganda.

PubMed

Gumisiriza, Robert; Hawumba, Joseph Funa; Okure, Mackay; Hensel, Oliver

2017-01-01

Uganda's banana industry is heavily impeded by the lack of cheap, reliable and sustainable energy mainly needed for processing of banana fruit into pulp and subsequent drying into chips before milling into banana flour that has several uses in the bakery industry, among others. Uganda has one of the lowest electricity access levels, estimated at only 2-3% in rural areas where most of the banana growing is located. In addition, most banana farmers have limited financial capacity to access modern solar energy technologies that can generate sufficient energy for industrial processing. Besides energy scarcity and unreliability, banana production, marketing and industrial processing generate large quantities of organic wastes that are disposed of majorly by unregulated dumping in places such as swamps, thereby forming huge putrefying biomass that emit green house gases (methane and carbon dioxide). On the other hand, the energy content of banana waste, if harnessed through appropriate waste-to-energy technologies, would not only solve the energy requirement for processing of banana pulp, but would also offer an additional benefit of avoiding fossil fuels through the use of renewable energy. The potential waste-to-energy technologies that can be used in valorisation of banana waste can be grouped into three: Thermal (Direct combustion and Incineration), Thermo-chemical (Torrefaction, Plasma treatment, Gasification and Pyrolysis) and Biochemical (Composting, Ethanol fermentation and Anaerobic Digestion). However, due to high moisture content of banana waste, direct application of either thermal or thermo-chemical waste-to-energy technologies is challenging. Although, supercritical water gasification does not require drying of feedstock beforehand and can be a promising thermo-chemical technology for gasification of wet biomass such as banana waste, it is an expensive technology that may not be adopted by banana farmers in Uganda. Biochemical conversion technologies are reported to be more eco-friendly and appropriate for waste biomass with high moisture content such as banana waste. Uganda's banana industrialisation is rural based with limited technical knowledge and economic capability to setup modern solar technologies and thermo-conversions for drying banana fruit pulp. This review explored the advantages of various waste-to-energy technologies as well as their shortfalls. Anaerobic digestion stands out as the most feasible and appropriate waste-to-energy technology for solving the energy scarcity and waste burden in banana industry. Finally, potential options for the enhancement of anaerobic digestion of banana waste were also elucidated.

Understanding managerial behaviour during initial steps of a clinical information system adoption

PubMed Central

2011-01-01

Background While the study of the information technology (IT) implementation process and its outcomes has received considerable attention, the examination of pre-adoption and pre-implementation stages of configurable IT uptake appear largely under-investigated. This paper explores managerial behaviour during the periods prior the effective implementation of a clinical information system (CIS) by two Canadian university multi-hospital centers. Methods Adopting a structurationist theoretical stance and a case study research design, the processes by which CIS managers' patterns of discourse contribute to the configuration of the new technology in their respective organizational contexts were longitudinally examined over 33 months. Results Although managers seemed to be aware of the risks and organizational impact of the adoption of a new clinical information system, their decisions and actions over the periods examined appeared rather to be driven by financial constraints and power struggles between different groups involved in the process. Furthermore, they largely emphasized technological aspects of the implementation, with organizational dimensions being put aside. In view of these results, the notion of 'rhetorical ambivalence' is proposed. Results are further discussed in relation to the significance of initial decisions and actions for the subsequent implementation phases of the technology being configured. Conclusions Theoretical and empirically grounded, the paper contributes to the underdeveloped body of literature on information system pre-implementation processes by revealing the crucial role played by managers during the initial phases of a CIS adoption. PMID:21682885

Study types and reliability of Real World Evidence compared with experimental evidence used in Polish reimbursement decision-making processes.

PubMed

Wilk, N; Wierzbicka, N; Skrzekowska-Baran, I; Moćko, P; Tomassy, J; Kloc, K

2017-04-01

The aim of this study was to identify the relationship and impact between Real World Evidence (RWE) and experimental evidence (EE) in Polish decision-making processes for the drugs from selected Anatomical Therapeutic Chemical (ATC) groups. Descriptive study. A detailed analysis was performed for 58 processes from five ATC code groups in which RWE for effectiveness, or effectiveness and safety were cited in Agency for Health Technology Assessment and Tariff System's (AOTMiT) documents published between January 2012 and September 2015: Verification Analysis of AOTMiT, Statement of the Transparency Council of AOTMiT, and Recommendation of the President of AOTMiT. In 62% of the cases, RWE supported the EE and confirmed its main conclusions. The majority of studies in the EE group showed to be RCTs (97%), and the RWE group included mainly cohort studies (89%). There were more studies without a control group within RWE compared with the EE group (10% vs 1%). Our results showed that EE are more often assessed using Jadad, NICE or NOS scale by AOTMiT compared with RWE (93% vs 48%). When the best evidence within a given decision-making process is analysed, half of RWE and two-thirds of EE are considered high quality evidence. RWE plays an important role in the decision-making processes on public funding of drugs in Poland, contributing to nearly half (45%) of all the evidence considered. There exist such processes in which the proportion of RWE is dominant, with one process showing RWE as the only evidence presented. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and Their Technologies to Further Enable Interoperability

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Nichols, Kelvin F.

2006-01-01

To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative a requirement to standardize and control the naming conventions of very disparate systems and technologies are emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation Initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation Initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and birds of a feather activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another

To Pluto by way of a postage stamp

NASA Technical Reports Server (NTRS)

Staehle, Robert L.; Terrile, Richard J.; Weinstein, Stacy S.

1994-01-01

In this time of constrained budgets, the primary question facing planetary explorers is not 'Can we do it?' but 'Can we do it cheaply?' Taunted by words on a postage stamp, a group of mission designers at the Jet Propulsion Laboratory is struggling to find a cheap way to go to Pluto. Three primary goals were set by the science community: (1) imaging of Pluto and Charon, (2) mapping their surface composition, and (3) characterizing Pluto's atmosphere. The spacecraft will be designed around these primary goals. With the help of the Advanced Technology Insertion (ATI) process $5 million was alloted for two years to shop for lightweight components and subsystems using new technology never tried on a planetary mission. The process for this search and development is described.

78 FR 1265 - Dana Holding Corporation; Power Technologies Group Division; Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

...; Power Technologies Group Division; Including On-Site Leased Workers From Manpower Milwaukee, WI; Notice... former workers of Dana Holding Company, Power Technologies Group Division, Milwaukee, Wisconsin (subject... reconsideration investigation, I determine that workers of Dana Holding Company, Power Technologies Group Division...

Study of the combinatorial impact of empathy and emotion on the processing of conflicts of interest with the event-related potential technique.

PubMed

He, Xiaoli; Zhang, Ni

2017-01-01

Studies have found that empathy is important in moral development and violence suppression, and emotion also affects empathy. However, the combinatorial effect of emotion and empathy on the processing of conflicts is not known. A total of 44 undergraduate students (23 in low-empathy group and 21 in high-empathy group) were enrolled in this study. They were subjected to positive, negative, and neutral emotion evoking, as well as conflicting or nonconflicting proposals. Event-related potential technology was used to study the combinatorial effects of empathy and emotion on the processing of conflict of interest. We found that under the influence of a positive emotion, both low- and high-empathy groups exhibited lower rejection rates. In the context of conflict, individuals in the high-empathy group showed fewer refusals under positive emotion. In the low-empathy group, there was no significant difference between responses to different emotions, but conflicting proposals induced more negative medial frontal negativity than nonconflicting proposals. Individuals in the low-empathy group showed different late positive potentials when responding to different types of proposals under both neutral and negative emotions, whereas those in the high-empathy group only showed different late positive potentials responding to different types of proposals under negative emotion. Our results indicate that under positive emotion, individuals with low empathy show less difference in processing either conflicting or nonconflicting proposals, whereas under negative emotion, individuals with high empathy show enhanced motivation toward nonconflicting proposals.

Improving Evaluation to Address the Unintended Consequences of Health Information Technology:. a Position Paper from the Working Group on Technology Assessment & Quality Development.

PubMed

Magrabi, F; Ammenwerth, E; Hyppönen, H; de Keizer, N; Nykänen, P; Rigby, M; Scott, P; Talmon, J; Georgiou, A

2016-11-10

With growing use of IT by healthcare professionals and patients, the opportunity for any unintended effects of technology to disrupt care health processes and outcomes is intensified. The objectives of this position paper by the IMIA Working Group (WG) on Technology Assessment and Quality Development are to highlight how our ongoing initiatives to enhance evaluation are also addressing the unintended consequences of health IT. Review of WG initiatives Results: We argue that an evidence-based approach underpinned by rigorous evaluation is fundamental to the safe and effective use of IT, and for detecting and addressing its unintended consequences in a timely manner. We provide an overview of our ongoing initiatives to strengthen study design, execution and reporting by using evaluation frameworks and guidelines which can enable better characterization and monitoring of unintended consequences, including the Good Evaluation Practice Guideline in Health Informatics (GEP-HI) and the Statement on Reporting of Evaluation Studies in Health Informatics (STARE-HI). Indicators to benchmark the adoption and impact of IT can similarly be used to monitor unintended effects on healthcare structures, processes and outcome. We have also developed EvalDB, a web-based database of evaluation studies to promulgate evidence about unintended effects and are developing the content for courses to improve training in health IT evaluation. Evaluation is an essential ingredient for the effective use of IT to improve healthcare quality and patient safety. WG resources and skills development initiatives can facilitate a proactive and evidence-based approach to detecting and addressing the unintended effects of health IT.

What is the impact of disease prevalence upon health technology assessment?

PubMed

Rotily, Michel; Roze, Stéphane

2013-12-01

As national budgets for health care will remain under stress for the foreseeable future, health technology assessment (HTA) aimed at offering guidance to policy-making will have an increasing role to play in optimizing resources. The emergence of new treatment paradigms and health technologies, and the prevalence studies which determine when a disease is a current or future burden for patients and the community are in the roots of the HTA process. Analysing studies on screening test strategies and health care policy, this paper revisits two key concepts in epidemiology, prevalence and incidence, in order to show their major impact upon HTA. Utilization of the predictive values of screening tests that include prevalence in their calculations, and analysing all options for screening strategies are necessary in HTA. Cost-effectiveness analyses and statistical models should include potential externalities, especially the impact of prevention and treatment on infectious disease prevalence. Beyond estimates of cost-effectiveness ratios, decision makers also need to know by how much their annual health care budget is likely to increase or decrease in the years following the emergence of new technologies: hence the importance of incidence- or prevalence-based economic evaluations. As new paradigms are occurring, especially in the field of oncology, with treatments targeted to 'small' groups of patients identified through genetic testing, prevalence data are strongly needed. Precise estimates of disease prevalence, in general populations as well as in risk or targeted groups, will therefore be necessary to improve HTA process. Copyright © 2013 Elsevier Ltd. All rights reserved.

An On-line Technology Information System (OTIS) for Advanced Life Support

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Boulanger, Richard; Hogan, John A.; Rodriquez, Luis

2003-01-01

OTIS is an on-line communication platform designed for smooth flow of technology information between advanced life support (ALS) technology developers, researchers, system analysts, and managers. With pathways for efficient transfer of information, several improvements in the ALS Program will result. With OTIS, it will be possible to provide programmatic information for technology developers and researchers, technical information for analysts, and managerial decision support. OTIS is a platform that enables the effective research, development, and delivery of complex systems for life support. An electronic data collection form has been developed for the solid waste element, drafted by the Solid Waste Working Group. Forms for other elements (air revitalization, water recovery, food processing, biomass production and thermal control) will also be developed, based on lessons learned from the development of the solid waste form. All forms will be developed by consultation with other working groups, comprised of experts in the area of interest. Forms will be converted to an on-line data collection interface that technology developers will use to transfer information into OTIS. Funded technology developers will log in to OTIS annually to complete the element- specific forms for their technology. The type and amount of information requested expands as the technology readiness level (TRL) increases. The completed forms will feed into a regularly updated and maintained database that will store technology information and allow for database searching. To ensure confidentiality of proprietary information, security permissions will be customized for each user. Principal investigators of a project will be able to designate certain data as proprietary and only technical monitors of a task, ALS Management, and the principal investigator will have the ability to view this information. The typical OTIS user will be able to read all non-proprietary information about all projects.Interaction with the database will occur over encrypted connections, and data will be stored on the server in an encrypted form. Implementation of OTIS will initiate a community-accessible repository of technology development information. With OTIS, ALS element leads and managers will be able to carry out informed technology selection for programmatic decisions. OTIS will also allow analysts to make accurate evaluations of technology options. Additionally, the range and specificity of information solicited will help educate technology developers of program needs. With augmentation, OTIS reporting is capable of replacing the current fiscal year-end reporting process. Overall, the system will enable more informed R&TD decisions and more rapid attainment of ALS Program goals.

A mobile diabetes management and educational system for type-2 diabetics in Saudi Arabia (SAED).

PubMed

Alotaibi, Mohammed M; Istepanian, Robert; Philip, Nada

2016-01-01

Diabetes is a chronic disease, with high prevalence across many nations, which is characterized by elevated level of blood glucose and risk of acute and chronic complication. The Kingdom of Saudi Arabia (KSA) has one of the highest levels of diabetes prevalence globally. It is well-known that the treatment of diabetes is complex process and requires both lifestyle change and clear pharmacologic treatment plan. To avoid the complication from diabetes, the effective behavioural change and extensive education and self-management is one of the key approaches to alleviate such complications. However, this process is lengthy and expensive. The recent studies on the user of smart phone technologies for diabetes self-management have proven to be an effective tool in controlling hemoglobin (HbA1c) levels especially in type-2 diabetic (T2D) patients. However, to date no reported study addressed the effectiveness of this approach in the in Saudi patients. This study investigates the impact of using mobile health technologies for the self-management of diabetes in Saudi Arabia. In this study, an intelligent mobile diabetes management system (SAED), tailored for T2D patients in KSA was developed. A pilot study of the SAED system was conducted in Saudi Arabia with 20 diabetic patients for 6 months duration. The patients were randomly categorized into a control group who did not use the SAED system and an intervention group whom used the SAED system for their diabetes management during this period. At the end of the follow-up period, the HbA1c levels in the patients in both groups were measure together with a diabetes knowledge test was also conducted to test the diabetes awareness of the patients. The results of SAED pilot study showed that the patients in the intervention group were able to significantly decrease their HbA1c levels compared to the control group. The SAED system also enhanced the diabetes awareness amongst the patients in the intervention group during the trial period. These outcomes confirm the global studies on the effectiveness of smart phone technologies in diabetes management. The significance of the study is that this was one of the first such studies conducted on Saudi patients and of their acceptance for such technology in their diabetes self-management treatment plans. The pilot study of the SAED system showed that a mobile health technology can significantly improve the HbA1C levels among Saudi diabetic and improve their disease management plans. The SAED system can also be an effective and low-cost solution in improving the quality of life of diabetic patients in the Kingdom considering the high level of prevalence and the increasing economic burden of this disease.

A National Research Council Evaluation of the Department of Energy's Marine and Hydrokinetic Resource Assessments

NASA Astrophysics Data System (ADS)

Glickson, D.; Holmes, K. J.; Cooke, D.

2012-12-01

Marine and hydrokinetic (MHK) resources are increasingly becoming part of energy regulatory, planning, and marketing activities in the U.S. and elsewhere. In particular, state-based renewable portfolio standards and federal production and investment tax credits have led to an increased interest in the possible deployment of MHK technologies. The Energy Policy Act of 2005 (Public Law 109-58) directed the Department of Energy (DOE) to estimate the size of the MHK resource base. In order to help DOE prioritize its overall portfolio of future research, increase the understanding of the potential for MHK resource development, and direct MHK device and/or project developers to locations of greatest promise, the DOE Wind and Water Power Program requested that the National Research Council (NRC) provide an evaluation of the detailed assessments being conducted by five individual resource assessment groups. These resource assessment groups were contracted to estimate the amount of extractable energy from wave, tidal, ocean current, ocean thermal energy conversion, and riverine resources. Performing these assessments requires that each resource assessment group estimate the average power density of the resource base, as well as the basic technology characteristics and spatial and temporal constituents that convert power into electricity for that resource. The NRC committee evaluated the methodologies, technologies, and assumptions associated with each of these resource assessments. The committee developed a conceptual framework for delineating the processes used to develop the assessment results requested by the DOE, with definitions of the theoretical, technical, and practical resource to clarify elements of the overall resource assessment process. This allowed the NRC committee to make a comparison of different methods, terminology, and processes among the five resource assessment groups. The committee concluded that the overall approach taken by the wave resource and tidal resource assessment groups is a useful contribution to understanding the distribution and possible magnitude of energy sources from waves and tides in U.S. waters, but had concerns regarding the usefulness of aggregating the analysis to produce a "single number" estimate of the total national or regional theoretical and technical resource base. The committee had further concerns about the methodologies and assumptions within each assessment, as well as the limited scope of validation exercises. An interim report was released in July 2011, and the committee's final report will be released in Fall 2012.;

Microbial trophic interactions and mcrA gene expression in monitoring of anaerobic digesters.

PubMed

Alvarado, Alejandra; Montañez-Hernández, Lilia E; Palacio-Molina, Sandra L; Oropeza-Navarro, Ricardo; Luévanos-Escareño, Miriam P; Balagurusamy, Nagamani

2014-01-01

Anaerobic digestion (AD) is a biological process where different trophic groups of microorganisms break down biodegradable organic materials in the absence of oxygen. A wide range of AD technologies is being used to convert livestock manure, municipal and industrial wastewaters, and solid organic wastes into biogas. AD gains importance not only because of its relevance in waste treatment but also because of the recovery of carbon in the form of methane, which is a renewable energy and is used to generate electricity and heat. Despite the advances on the engineering and design of new bioreactors for AD, the microbiology component always poses challenges. Microbiology of AD processes is complicated as the efficiency of the process depends on the interactions of various trophic groups involved. Due to the complex interdependence of microbial activities for the functionality of the anaerobic bioreactors, the genetic expression of mcrA, which encodes a key enzyme in methane formation, is proposed as a parameter to monitor the process performance in real time. This review evaluates the current knowledge on microbial groups, their interactions, and their relationship to the performance of anaerobic biodigesters with a focus on using mcrA gene expression as a tool to monitor the process.

Advanced research and technology program for advanced high pressure oxygen-hydrogen rocket propulsion

NASA Technical Reports Server (NTRS)

Marsik, S. J.; Morea, S. F.

1985-01-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Advanced research and technology programs for advanced high-pressure oxygen-hydrogen rocket propulsion

NASA Technical Reports Server (NTRS)

Marsik, S. J.; Morea, S. F.

1985-01-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Advanced research and technology programs for advanced high-pressure oxygen-hydrogen rocket propulsion

NASA Astrophysics Data System (ADS)

Marsik, S. J.; Morea, S. F.

1985-03-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

The Space Shuttle focused-technology program - Lessons learned

NASA Technical Reports Server (NTRS)

Fitzgerald, P. E., Jr.; Gabris, E. A.

1983-01-01

The results of a focused technology program (FTP), its management structure, the development of the Space Shuttle, and lessons applicable to future space programs such as a space station are discussed. A committee was formed by NASA in 1969 to define the technologies necessary for a reusable spacecraft. Basic and applied research assessments were featured at the beginning of the process. Working groups were established to cover all necessary areas, e.g., Operations, Structures and Materials, Aerothermodynamics, etc., and tasks were distributed to appropriate NASA centers. Funding was drawn from existing budgets. The FTP proceeded successfully because of an understanding of the respective roles of industry and government, the willingness of industry to invest early in a new technology, and the unclassified status of information generated by the program. The in-house design and technology transfer methods that brought the project to a technology demonstration phase are explored, noting the necessity for users to take part in the development within their field.

The globalization of technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, P.P.

1991-01-01

The past two decades have seen dramatic change in the distribution and organization of corporate technical activities worldwide. Japan's rapid ascent to the status of technological superpower, the steady rise in technical strength of Europe's leading economies, and the rapid growth in technical competence of an expanding group of newly industrialized nations have put an end to the era of U.S. technological supremacy. Meanwhile, a rapid expansion of private foreign direct investment and a proliferation of international corporate alliances have increased the economic and technological interdependence of industrialized nations. As a result of these changes, the process of technology development,more » application, and diffusion in a growing number of industries has become increasingly globalized. The following figures document this trend, which will have far-reaching implications for U.S. business practices and federal competitiveness policies. The diagrams address R and D personnel per 10,000 labor force, nondefense R and D spending, high-technology exports, investments in other countries, foreign investment in the United States, and transnational alliances.« less

Metal Separations and Recovery in the Mining Industry

NASA Astrophysics Data System (ADS)

Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

2012-11-01

Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

Exploring the Analytical Processes of Intelligence Analysts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chin, George; Kuchar, Olga A.; Wolf, Katherine E.

We present an observational case study in which we investigate and analyze the analytical processes of intelligence analysts. Participating analysts in the study carry out two scenarios where they organize and triage information, conduct intelligence analysis, report results, and collaborate with one another. Through a combination of artifact analyses, group interviews, and participant observations, we explore the space and boundaries in which intelligence analysts work and operate. We also assess the implications of our findings on the use and application of relevant information technologies.

From Flavr Savr Tomatoes to Stem Cell Therapy: Young People's Understandings of Gene Technology, 15 Years on

NASA Astrophysics Data System (ADS)

Lewis, Jenny

2014-02-01

This paper explores knowledge and understanding of basic genetics and gene technologies in school students who have been taught to a `science for all' National Curriculum and compares 482 students in 1995 (gene technology was a new and rapidly developing area of science with potential to impact on everyday life; the first cohort of students had been taught to the National Curriculum for Science) with 154 students in 2011 (genomics had replaced gene technology as a rapidly developing area of science with potential to impact on everyday life; science as a core subject within the National Curriculum was well established). These studies used the same questions, with the same age group (14-16) across the same (full) ability range; in addition the 2011 sample were asked about stem cells, stem cell technology and epigenetics. Students in 2011 showed: better knowledge of basic genetics but continuing difficulty in developing coherent explanatory frameworks; a good understanding of the nature of stem cells but no understanding of the process by which such cells become specialised; better understanding of different genetic technologies but also a wider range of misunderstandings and confusions (both between different genetic technologies and with other biological processes); continuing difficulty in evaluating potential veracity of short `news' items but greater awareness of ethical issues and the range of factors (including knowledge of genetics) which could be drawn on when justifying a view or coming to a decision. Implications for a `science for all' curriculum are considered.

Digital communication between clinician and patient and the impact on marginalised groups: a realist review in general practice.

PubMed

Huxley, Caroline J; Atherton, Helen; Watkins, Jocelyn Anstey; Griffiths, Frances

2015-12-01

Increasingly, the NHS is embracing the use of digital communication technology for communication between clinicians and patients. Policymakers deem digital clinical communication as presenting a solution to the capacity issues currently faced by general practice. There is some concern that these technologies may exacerbate existing inequalities in accessing health care. It is not known what impact they may have on groups who are already marginalised in their ability to access general practice. To assess the potential impact of the availability of digital clinician-patient communication on marginalised groups' access to general practice in the UK. Realist review in general practice. A four-step realist review process was used: to define the scope of the review; to search for and scrutinise evidence; to extract and synthesise evidence; and to develop a narrative, including hypotheses. Digital communication has the potential to overcome the following barriers for marginalised groups: practical access issues, previous negative experiences with healthcare service/staff, and stigmatising reactions from staff and other patients. It may reduce patient-related barriers by offering anonymity and offers advantages to patients who require an interpreter. It does not impact on inability to communicate with healthcare professionals or on a lack of candidacy. It is likely to work best in the context of a pre-existing clinician-patient relationship. Digital communication technology offers increased opportunities for marginalised groups to access health care. However, it cannot remove all barriers to care for these groups. It is likely that they will remain disadvantaged relative to other population groups after their introduction. © British Journal of General Practice 2015.

Does applying technology throughout the medication use process improve patient safety with antineoplastics?

PubMed

Bubalo, Joseph; Warden, Bruce A; Wiegel, Joshua J; Nishida, Tess; Handel, Evelyn; Svoboda, Leanne M; Nguyen, Lam; Edillo, P Neil

2014-12-01

Medical errors, in particular medication errors, continue to be a troublesome factor in the delivery of safe and effective patient care. Antineoplastic agents represent a group of medications highly susceptible to medication errors due to their complex regimens and narrow therapeutic indices. As the majority of these medication errors are frequently associated with breakdowns in poorly defined systems, developing technologies and evolving workflows seem to be a logical approach to provide added safeguards against medication errors. This article will review both the pros and cons of today's technologies and their ability to simplify the medication use process, reduce medication errors, improve documentation, improve healthcare costs and increase provider efficiency as relates to the use of antineoplastic therapy throughout the medication use process. Several technologies, mainly computerized provider order entry (CPOE), barcode medication administration (BCMA), smart pumps, electronic medication administration record (eMAR), and telepharmacy, have been well described and proven to reduce medication errors, improve adherence to quality metrics, and/or improve healthcare costs in a broad scope of patients. The utilization of these technologies during antineoplastic therapy is weak at best and lacking for most. Specific to the antineoplastic medication use system, the only technology with data to adequately support a claim of reduced medication errors is CPOE. In addition to the benefits these technologies can provide, it is also important to recognize their potential to induce new types of errors and inefficiencies which can negatively impact patient care. The utilization of technology reduces but does not eliminate the potential for error. The evidence base to support technology in preventing medication errors is limited in general but even more deficient in the realm of antineoplastic therapy. Though CPOE has the best evidence to support its use in the antineoplastic population, benefit from many other technologies may have to be inferred based on data from other patient populations. As health systems begin to widely adopt and implement new technologies it is important to critically assess their effectiveness in improving patient safety. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Inquiry-Based Integrated Science Education: Implementation of Local Content “Soil Washing” Project To Improve Junior High School Students’ Environmental Literacy

NASA Astrophysics Data System (ADS)

Syifahayu

2017-02-01

The study was conducted based on teaching and learning problems led by conventional method that had been done in the process of learning science. It gave students lack opportunities to develop their competence and thinking skills. Consequently, the process of learning science was neglected. Students did not have opportunity to improve their critical attitude and creative thinking skills. To cope this problem, the study was conducted using Project-Based Learning model through inquiry-based science education about environment. The study also used an approach called Sains Lingkungan and Teknologi masyarakat - “Saling Temas” (Environmental science and Technology in Society) which promoted the local content in Lampung as a theme in integrated science teaching and learning. The study was a quasi-experimental with pretest-posttest control group design. Initially, the subjects were given a pre-test. The experimental group was given inquiry learning method while the control group was given conventional learning. After the learning process, the subjects of both groups were given post-test. Quantitative analysis was performed using the Mann-Whitney U-test and also a qualitative descriptive. Based on the result, environmental literacy skills of students who get inquiry learning strategy, with project-based learning model on the theme soil washing, showed significant differences. The experimental group is better than the control group. Data analysis showed the p-value or sig. (2-tailed) is 0.000 <α = 0.05 with the average N-gain of experimental group is 34.72 and control group is 16.40. Besides, the learning process becomes more meaningful.

Wind Systems for Pumping Water: A Training Manual. No. T-25.

ERIC Educational Resources Information Center

Eschenbach, Willis

This document was prepared as a training manual for people interested in developing appropriate technological approaches to using wind power to pump water. The training program is divided into two basic formats, one in which a session focuses on the design process and participants are expected to do some design work in groups, and another which…

The Effect of Scaffolding Students' Context-Generating Cognitive Activity in Technology-Enhanced Case-Based Learning

ERIC Educational Resources Information Center

Demetriadis, S. N.; Papadopoulos, P. M.; Stamelos, I. G.; Fischer, F.

2008-01-01

This study investigates the hypothesis that students' learning and problem-solving performance in ill-structured domains can be improved, if elaborative question prompts are used to activate students' context-generating cognitive processes, during case study. Two groups of students used a web-based learning environment to criss-cross and study…

Foreign Scholars' Theoretical Approaches to Using Social Networks as Educational Strategies

ERIC Educational Resources Information Center

Pazyura, Natalia

2017-01-01

Modern trends in development of information and communication technologies change many aspects in the process of education: from the role of participants to the forms and methods of knowledge delivery. ICTs make it possible to develop students' creative potential. The emergence of online social groups was an important event in the sphere of…

Policy Learning to Internationalize European Science: Possibilities and Limitations of Open Coordination

ERIC Educational Resources Information Center

Tamtik, Merli; Sá, Creso M.

2014-01-01

Mutual learning exercises have become increasingly employed in Europe over the last decade. This study examines the policy learning process in the area of internationalization of science and technology, which has been targeted as a priority for Europe. Through a case study of the open method of coordination expert group in this area, the analysis…

Applying Web-Based Co-Regulated Learning to Develop Students' Learning and Involvement in a Blended Computing Course

ERIC Educational Resources Information Center

Tsai, Chia-Wen

2015-01-01

This research investigated, via quasi-experiments, the effects of web-based co-regulated learning (CRL) on developing students' computing skills. Two classes of 68 undergraduates in a one-semester course titled "Applied Information Technology: Data Processing" were chosen for this research. The first class (CRL group, n = 38) received…

Research planning criteria for regenerative life-support systems applicable to space habitats

NASA Technical Reports Server (NTRS)

Spurlock, J.; Cooper, W.; Deal, P.; Harlan, A.; Karel, M.; Modell, M.; Moe, P.; Phillips, J.; Putnam, D.; Quattrone, P.

1979-01-01

The second phase of analyses that were conducted by the Life Support Systems Group of the 1977 NASA Ames Summer Study is described. This phase of analyses included a preliminary review of relevant areas of technology that can contribute to the development of closed life-support systems for space habitats, the identification of research options in these areas of technology, and the development of guidelines for an effective research program. The areas of technology that were studied included: (1) nutrition, diet, and food processing; (2) higher plant agriculture; (3) animal agriculture; (4) waste conversion and resource recovery; and (5) system stability and safety. Results of these analyses, including recommended research options and criteria for establishing research priorities among these many options, are discussed.

Study on the Property Change of Rhizoma Coptidis and Its Ginger Juice Processed Products Based on 5-Ht Level and Brain Tissues Morphology of Rats

NASA Astrophysics Data System (ADS)

Zhong, Lingyun; Tong, Hengli; Lv, Mu; Deng, Yufen

2017-09-01

According to the theory of traditional Chinese Medicine (TCM), all Chinese materia medica need to be processed using Pao zhi which is a processing technology before being used in clinic. Ginger juice, made from dried or fresh ginger, is one of the main TCM processing accessories and always used to help change some Chinese materia medica’s properties for its warm or hot nature. The purpose of this paper is to discuss the influence of ginger juice on Rhizoma Coptidis (RC) by determining 5-hydroxytryptamine (5-HT) content and observing morphological changes in the harns tissue of rats. Raw Rhizoma Coptidis (RRC), fresh ginger juice processed Rhizoma Coptidis (FGJPRC), dried juice processed Rhizoma Coptidis (DGJPRC), dried ginger juice (DGJ) and fresh ginger juice (FGJ) were prepared using appropriate methods. Immunohistochemical staining was used to observe the distribution of 5-HT and fluorescence spectrophotometry was applied to determine 5-hydroxytryptamine content in the brain tissue of rats. 5 - HT in brain tissue of the rats of RRC group was distributed most densely, with the highest content. Compared to the blank group, RRC and different ginger processed RC groups could lead to increasing content of 5-HT in rat encephalon, and significant differences in RRC. Compared with the RRC, the 5-HT content in rat encephalon in DGJPRC, FGJPRC, FGJ and DGJ groups reduced, and DGJPRC, FGJPRC groups showed significant difference, FGJ and DGJ groups showed extreme significant differences. The research showed that processing with hot, warm accessories would moderate the cold nature of RC. The cold and hot nature of Traditional Chinese Materia Medica could be expressed by the difference of 5-HT contents and morphological changes of rats’ brain tissue. Simultaneously, the research showed the different excipient of ginger juice would have different effects on the processing of RC.

Obama Kennedy Space Center Visit

NASA Image and Video Library

2010-04-14

President Barack Obama, left, Air Force Col. Lee Rosen, Commander, 45th Launch Group, center, and SpaceX CEO Elon Musk talk with Dr. John P. Holdren is Assistant to the President for Science and Technology during a tour of the commercial rocket processing facility of Space Exploration Technologies, known as SpaceX, at Cape Canaveral Air Force Station, Cape Canaveral, Fla. on Thursday, April 15, 2010. Obama also visited the NASA Kennedy Space Center to deliver remarks on the bold new course the administration is charting to maintain U.S. leadership in human space flight. Photo Credit: (NASA/Bill Ingalls)

Scaling up Dietary Data for Decision-Making in Low-Income Countries: New Technological Frontiers.

PubMed

Bell, Winnie; Colaiezzi, Brooke A; Prata, Cathleen S; Coates, Jennifer C

2017-11-01

Dietary surveys in low-income countries (LICs) are hindered by low investment in the necessary research infrastructure, including a lack of basic technology for data collection, links to food composition information, and data processing. The result has been a dearth of dietary data in many LICs because of the high cost and time burden associated with dietary surveys, which are typically carried out by interviewers using pencil and paper. This study reviewed innovative dietary assessment technologies and gauged their suitability to improve the quality and time required to collect dietary data in LICs. Predefined search terms were used to identify technologies from peer-reviewed and gray literature. A total of 78 technologies were identified and grouped into 6 categories: 1 ) computer- and tablet-based, 2 ) mobile-based, 3 ) camera-enabled, 4 ) scale-based, 5 ) wearable, and 6 ) handheld spectrometers. For each technology, information was extracted on a number of overarching factors, including the primary purpose, mode of administration, and data processing capabilities. Each technology was then assessed against predetermined criteria, including requirements for respondent literacy, battery life, requirements for connectivity, ability to measure macro- and micronutrients, and overall appropriateness for use in LICs. Few technologies reviewed met all the criteria, exhibiting both practical constraints and a lack of demonstrated feasibility for use in LICs, particularly for large-scale, population-based surveys. To increase collection of dietary data in LICs, development of a contextually adaptable, interviewer-administered dietary assessment platform is recommended. Additional investments in the research infrastructure are equally important to ensure time and cost savings for the user.

Scaling up Dietary Data for Decision-Making in Low-Income Countries: New Technological Frontiers

PubMed Central

Bell, Winnie; Colaiezzi, Brooke A; Prata, Cathleen S

2017-01-01

Dietary surveys in low-income countries (LICs) are hindered by low investment in the necessary research infrastructure, including a lack of basic technology for data collection, links to food composition information, and data processing. The result has been a dearth of dietary data in many LICs because of the high cost and time burden associated with dietary surveys, which are typically carried out by interviewers using pencil and paper. This study reviewed innovative dietary assessment technologies and gauged their suitability to improve the quality and time required to collect dietary data in LICs. Predefined search terms were used to identify technologies from peer-reviewed and gray literature. A total of 78 technologies were identified and grouped into 6 categories: 1) computer- and tablet-based, 2) mobile-based, 3) camera-enabled, 4) scale-based, 5) wearable, and 6) handheld spectrometers. For each technology, information was extracted on a number of overarching factors, including the primary purpose, mode of administration, and data processing capabilities. Each technology was then assessed against predetermined criteria, including requirements for respondent literacy, battery life, requirements for connectivity, ability to measure macro- and micronutrients, and overall appropriateness for use in LICs. Few technologies reviewed met all the criteria, exhibiting both practical constraints and a lack of demonstrated feasibility for use in LICs, particularly for large-scale, population-based surveys. To increase collection of dietary data in LICs, development of a contextually adaptable, interviewer-administered dietary assessment platform is recommended. Additional investments in the research infrastructure are equally important to ensure time and cost savings for the user. PMID:29141974

Surface contamination analysis technology team overview

NASA Astrophysics Data System (ADS)

Burns, H. Dewitt, Jr.

1996-11-01

The surface contamination analysis technology (SCAT) team was originated as a working roup of NASA civil service, Space Shuttle contractor, and university groups. Participating members of the SCAT Team have included personnel from NASA Marshall Space Flight Center's Materials and Processes Laboratory and Langley Research Center's Instrument Development Group; contractors-Thiokol Corporation's Inspection Technology Group, AC Engineering support contractor, Aerojet, SAIC, and Lockheed MArtin/Oak Ridge Y-12 support contractor and Shuttle External Tank prime contractor; and the University of Alabama in Huntsville's Center for Robotics and Automation. The goal of the SCAT team as originally defined was to develop and integrate a multi-purpose inspection head for robotic application to in-process inspection of contamination sensitive surfaces. One area of interest was replacement of ozone depleting solvents currently used for surface cleanliness verification. The team approach brought together the appropriate personnel to determine what surface inspection techniques were applicable to multi-program surface cleanliness inspection. Major substrates of interest were chosen to simulate space shuttle critical bonding surface or surfaces sensitive to contamination such as fuel system component surfaces. Inspection techniques evaluated include optically stimulated electron emission or photoelectron emission; Fourier transform infrared spectroscopy; near infrared fiber optic spectroscopy; and, ultraviolet fluorescence. Current plans are to demonstrate an integrated system in MSFC's Productivity Enhancement Complex within five years from initiation of this effort in 1992. Instrumentation specifications and designs developed under this effort include a portable diffuse reflectance FTIR system built by Surface Optics Corporation and a third generation optically stimulated electron emission system built by LaRC. This paper will discuss the evaluation of the various techniques on a number of substrate materials contaminated with hydrocarbons, silicones, and fluorocarbons. Discussion will also include standards development for instrument calibration and testing.

Technologies for network-centric C4ISR

NASA Astrophysics Data System (ADS)

Dunkelberger, Kirk A.

2003-07-01

Three technologies form the heart of any network-centric command, control, communication, intelligence, surveillance, and reconnaissance (C4ISR) system: distributed processing, reconfigurable networking, and distributed resource management. Distributed processing, enabled by automated federation, mobile code, intelligent process allocation, dynamic multiprocessing groups, check pointing, and other capabilities creates a virtual peer-to-peer computing network across the force. Reconfigurable networking, consisting of content-based information exchange, dynamic ad-hoc routing, information operations (perception management) and other component technologies forms the interconnect fabric for fault tolerant inter processor and node communication. Distributed resource management, which provides the means for distributed cooperative sensor management, foe sensor utilization, opportunistic collection, symbiotic inductive/deductive reasoning and other applications provides the canonical algorithms for network-centric enterprises and warfare. This paper introduces these three core technologies and briefly discusses a sampling of their component technologies and their individual contributions to network-centric enterprises and warfare. Based on the implied requirements, two new algorithms are defined and characterized which provide critical building blocks for network centricity: distributed asynchronous auctioning and predictive dynamic source routing. The first provides a reliable, efficient, effective approach for near-optimal assignment problems; the algorithm has been demonstrated to be a viable implementation for ad-hoc command and control, object/sensor pairing, and weapon/target assignment. The second is founded on traditional dynamic source routing (from mobile ad-hoc networking), but leverages the results of ad-hoc command and control (from the contributed auctioning algorithm) into significant increases in connection reliability through forward prediction. Emphasis is placed on the advantages gained from the closed-loop interaction of the multiple technologies in the network-centric application environment.

Beyond nutrient-based food indices: a data mining approach to search for a quantitative holistic index reflecting the degree of food processing and including physicochemical properties.

PubMed

Fardet, Anthony; Lakhssassi, Sanaé; Briffaz, Aurélien

2018-01-24

Processing has major impacts on both the structure and composition of food and hence on nutritional value. In particular, high consumption of ultra-processed foods (UPFs) is associated with increased risks of obesity and diabetes. Unfortunately, existing food indices only focus on food nutritional content while failing to consider either food structure or the degree of processing. The objectives of this study were thus to link non-nutrient food characteristics (texture, water activity (a w ), glycemic and satiety potentials (FF), and shelf life) to the degree of processing; search for associations between these characteristics with nutritional composition; search for a holistic quantitative technological index; and determine quantitative rules for a food to be defined as UPF using data mining. Among the 280 most widely consumed foods by the elderly in France, 139 solid/semi-solid foods were selected for textural and a w measurements, and classified according to three degrees of processing. Our results showed that minimally-processed foods were less hyperglycemic, more satiating, had better nutrient profile, higher a w , shorter shelf life, lower maximum stress, and higher energy at break than UPFs. Based on 72 food variables, multivariate analyses differentiated foods according to their degree of processing. Then technological indices including food nutritional composition, a w , FF and textural parameters were tested against technological groups. Finally, a LIM score (nutrients to limit) ≥8 per 100 kcal and a number of ingredients/additives >4 are relevant, but not sufficient, rules to define UPFs. We therefore suggest that food health potential should be first defined by its degree of processing.

Improving Patient Experience and Primary Care Quality for Patients With Complex Chronic Disease Using the Electronic Patient-Reported Outcomes Tool: Adopting Qualitative Methods Into a User-Centered Design Approach

PubMed Central

Khan, Anum Irfan; Kuluski, Kerry; McKillop, Ian; Sharpe, Sarah; Bierman, Arlene S; Lyons, Renee F; Cott, Cheryl

2016-01-01

Background Many mHealth technologies do not meet the needs of patients with complex chronic disease and disabilities (CCDDs) who are among the highest users of health systems worldwide. Furthermore, many of the development methodologies used in the creation of mHealth and eHealth technologies lack the ability to embrace users with CCDD in the specification process. This paper describes how we adopted and modified development techniques to create the electronic Patient-Reported Outcomes (ePRO) tool, a patient-centered mHealth solution to help improve primary health care for patients experiencing CCDD. Objective This paper describes the design and development approach, specifically the process of incorporating qualitative research methods into user-centered design approaches to create the ePRO tool. Key lessons learned are offered as a guide for other eHealth and mHealth research and technology developers working with complex patient populations and their primary health care providers. Methods Guided by user-centered design principles, interpretive descriptive qualitative research methods were adopted to capture user experiences through interviews and working groups. Consistent with interpretive descriptive methods, an iterative analysis technique was used to generate findings, which were then organized in relation to the tool design and function to help systematically inform modifications to the tool. User feedback captured and analyzed through this method was used to challenge the design and inform the iterative development of the tool. Results Interviews with primary health care providers (n=7) and content experts (n=6), and four focus groups with patients and carers (n=14) along with a PICK analysis—Possible, Implementable, (to be) Challenged, (to be) Killed—guided development of the first prototype. The initial prototype was presented in three design working groups with patients/carers (n=5), providers (n=6), and experts (n=5). Working group findings were broken down into categories of what works and what does not work to inform modifications to the prototype. This latter phase led to a major shift in the purpose and design of the prototype, validating the importance of using iterative codesign processes. Conclusions Interpretive descriptive methods allow for an understanding of user experiences of patients with CCDD, their carers, and primary care providers. Qualitative methods help to capture and interpret user needs, and identify contextual barriers and enablers to tool adoption, informing a redesign to better suit the needs of this diverse user group. This study illustrates the value of adopting interpretive descriptive methods into user-centered mHealth tool design and can also serve to inform the design of other eHealth technologies. Our approach is particularly useful in requirements determination when developing for a complex user group and their health care providers. PMID:26892952

Stakeholder analysis methodologies resource book

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babiuch, W.M.; Farhar, B.C.

1994-03-01

Stakeholder analysis allows analysts to identify how parties might be affected by government projects. This process involves identifying the likely impacts of a proposed action and stakeholder groups affected by that action. Additionally, the process involves assessing how these groups might be affected and suggesting measures to mitigate any adverse effects. Evidence suggests that the efficiency and effectiveness of government actions can be increased and adverse social impacts mitigated when officials understand how a proposed action might affect stakeholders. This report discusses how to conduct useful stakeholder analyses for government officials making decisions on energy-efficiency and renewable-energy technologies and theirmore » commercialization. It discusses methodological issues that may affect the validity and reliability of findings, including sampling, generalizability, validity, ``uncooperative`` stakeholder groups, using social indicators, and the effect of government regulations. The Appendix contains resource directories and a list of specialists in stakeholder analysis and involvement.« less

Form control in atmospheric pressure plasma processing of ground fused silica

NASA Astrophysics Data System (ADS)

Li, Duo; Wang, Bo; Xin, Qiang; Jin, Huiliang; Wang, Jun; Dong, Wenxia

2014-08-01

Atmospheric Pressure Plasma Processing (APPP) using inductively coupled plasma has demonstrated that it can achieve comparable removal rate on the optical surface of fused silica under the atmosphere pressure and has the advantage of inducing no sub-surface damage for its non-contact and chemical etching mechanism. APPP technology is a cost effective way, compared with traditional mechanical polishing, magnetorheological finishing and ion beam figuring. Thus, due to these advantages, this technology is being tested to fabricate large aperture optics of fused silica to help shorten the polishing time in optics fabrication chain. Now our group proposes to use inductively coupled plasma processing technology to fabricate ground surface of fused silica directly after the grinding stage. In this paper, form control method and several processing parameters are investigated to evaluate the removal efficiency and the surface quality, including the robustness of removal function, velocity control mode and tool path strategy. However, because of the high heat flux of inductively coupled plasma, the removal depth with time can be non-linear and the ground surface evolvement will be affected. The heat polishing phenomenon is founded. The value of surface roughness is reduced greatly, which is very helpful to reduce the time of follow-up mechanical polishing. Finally, conformal and deterministic polishing experiments are analyzed and discussed. The form error is less 3%, before and after the APPP, when 10μm depth of uniform removal is achieved on a 60×60mm ground fused silica. Also, a basin feature is fabricated to demonstrate the figuring capability and stability. Thus, APPP is a promising technology in processing the large aperture optics.

Development of smartphone applications for nutrition and physical activity behavior change.

PubMed

Hebden, Lana; Cook, Amelia; van der Ploeg, Hidde P; Allman-Farinelli, Margaret

2012-08-22

Young adults (aged 18 to 35) are a population group at high risk for weight gain, yet we know little about how to intervene in this group. Easy access to treatment and support with self-monitoring of their behaviors may be important. Smartphones are gaining in popularity with this population group and software applications ("apps") used on these mobile devices are a novel technology that can be used to deliver brief health behavior change interventions directly to individuals en masse, with potentially favorable cost-utility. However, existing apps for modifying nutrition or physical activity behaviors may not always reflect best practice guidelines for weight management. This paper describes the process of developing four apps aimed at modifying key lifestyle behaviors associated with weight gain during young adulthood, including physical activity, and consumption of take-out foods (fast food), fruit and vegetables, and sugar-sweetened drinks. The development process involved: (1) deciding on the behavior change strategies, relevant guidelines, graphic design, and potential data collection; (2) selecting the platform (Web-based versus native); (3) creating the design, which required decisions about the user interface, architecture of the relational database, and programming code; and (4) testing the prototype versions with the target audience (young adults aged 18 to 35). The four apps took 18 months to develop, involving the fields of marketing, nutrition and dietetics, physical activity, and information technology. Ten subjects provided qualitative feedback about using the apps. The slow running speed of the apps (due to a reliance on an active Internet connection) was the primary issue identified by this group, as well as the requirement to log in to the apps. Smartphone apps may be an innovative medium for delivering individual health behavior change intervention en masse, but researchers must give consideration to the target population, available technologies, existing commercial apps, and the possibility that their use will be irregular and short-lived.

Development of Smartphone Applications for Nutrition and Physical Activity Behavior Change

PubMed Central

Cook, Amelia; van der Ploeg, Hidde P; Allman-Farinelli, Margaret

2012-01-01

Background Young adults (aged 18 to 35) are a population group at high risk for weight gain, yet we know little about how to intervene in this group. Easy access to treatment and support with self-monitoring of their behaviors may be important. Smartphones are gaining in popularity with this population group and software applications (“apps”) used on these mobile devices are a novel technology that can be used to deliver brief health behavior change interventions directly to individuals en masse, with potentially favorable cost-utility. However, existing apps for modifying nutrition or physical activity behaviors may not always reflect best practice guidelines for weight management. Objective This paper describes the process of developing four apps aimed at modifying key lifestyle behaviors associated with weight gain during young adulthood, including physical activity, and consumption of take-out foods (fast food), fruit and vegetables, and sugar-sweetened drinks. Methods The development process involved: (1) deciding on the behavior change strategies, relevant guidelines, graphic design, and potential data collection; (2) selecting the platform (Web-based versus native); (3) creating the design, which required decisions about the user interface, architecture of the relational database, and programming code; and (4) testing the prototype versions with the target audience (young adults aged 18 to 35). Results The four apps took 18 months to develop, involving the fields of marketing, nutrition and dietetics, physical activity, and information technology. Ten subjects provided qualitative feedback about using the apps. The slow running speed of the apps (due to a reliance on an active Internet connection) was the primary issue identified by this group, as well as the requirement to log in to the apps. Conclusions Smartphone apps may be an innovative medium for delivering individual health behavior change intervention en masse, but researchers must give consideration to the target population, available technologies, existing commercial apps, and the possibility that their use will be irregular and short-lived. PMID:23611892

Low Quality Natural Gas Sulfur Removal and Recovery CNG Claus Sulfur Recovery Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klint, V.W.; Dale, P.R.; Stephenson, C.

1997-10-01

Increased use of natural gas (methane) in the domestic energy market will force the development of large non-producing gas reserves now considered to be low quality. Large reserves of low quality natural gas (LQNG) contaminated with hydrogen sulfide (H{sub 2}S), carbon dioxide (CO{sub 2}) and nitrogen (N) are available but not suitable for treatment using current conventional gas treating methods due to economic and environmental constraints. A group of three technologies have been integrated to allow for processing of these LQNG reserves; the Controlled Freeze Zone (CFZ) process for hydrocarbon / acid gas separation; the Triple Point Crystallizer (TPC) processmore » for H{sub 2}S / C0{sub 2} separation and the CNG Claus process for recovery of elemental sulfur from H{sub 2}S. The combined CFZ/TPC/CNG Claus group of processes is one program aimed at developing an alternative gas treating technology which is both economically and environmentally suitable for developing these low quality natural gas reserves. The CFZ/TPC/CNG Claus process is capable of treating low quality natural gas containing >10% C0{sub 2} and measurable levels of H{sub 2}S and N{sub 2} to pipeline specifications. The integrated CFZ / CNG Claus Process or the stand-alone CNG Claus Process has a number of attractive features for treating LQNG. The processes are capable of treating raw gas with a variety of trace contaminant components. The processes can also accommodate large changes in raw gas composition and flow rates. The combined processes are capable of achieving virtually undetectable levels of H{sub 2}S and significantly less than 2% CO in the product methane. The separation processes operate at pressure and deliver a high pressure (ca. 100 psia) acid gas (H{sub 2}S) stream for processing in the CNG Claus unit. This allows for substantial reductions in plant vessel size as compared to conventional Claus / Tail gas treating technologies. A close integration of the components of the CNG Claus process also allow for use of the methane/H{sub 2}S separation unit as a Claus tail gas treating unit by recycling the CNG Claus tail gas stream. This allows for virtually 100 percent sulfur recovery efficiency (virtually zero SO{sub 2} emissions) by recycling the sulfur laden tail gas to extinction. The use of the tail gas recycle scheme also deemphasizes the conventional requirement in Claus units to have high unit conversion efficiency and thereby make the operation much less affected by process upsets and feed gas composition changes. The development of these technologies has been ongoing for many years and both the CFZ and the TPC processes have been demonstrated at large pilot plant scales. On the other hand, prior to this project, the CNG Claus process had not been proven at any scale. Therefore, the primary objective of this portion of the program was to design, build and operate a pilot scale CNG Claus unit and demonstrate the required fundamental reaction chemistry and also demonstrate the viability of a reasonably sized working unit.« less

Safeguarding the process of drug administration with an emphasis on electronic support tools

PubMed Central

Seidling, Hanna M; Lampert, Anette; Lohmann, Kristina; Schiele, Julia T; Send, Alexander J F; Witticke, Diana; Haefeli, Walter E

2013-01-01

Aims The aim of this work is to understand the process of drug administration and identify points in the workflow that resulted in interventions by clinical information systems in order to improve patient safety. Methods To identify a generic way to structure the drug administration process we performed peer-group discussions and supplemented these discussions with a literature search for studies reporting errors in drug administration and strategies for their prevention. Results We concluded that the drug administration process might consist of up to 11 sub-steps, which can be grouped into the four sub-processes of preparation, personalization, application and follow-up. Errors in drug handling and administration are diverse and frequent and in many cases not caused by the patient him/herself, but by family members or nurses. Accordingly, different prevention strategies have been set in place with relatively few approaches involving e-health technology. Conclusions A generic structuring of the administration process and particular error-prone sub-steps may facilitate the allocation of prevention strategies and help to identify research gaps. PMID:24007450

Review on CNC-Rapid Prototyping

NASA Astrophysics Data System (ADS)

Z, M. Nafis O.; Y, Nafrizuan M.; A, Munira M.; J, Kartina

2012-09-01

This article reviewed developments of Computerized Numerical Control (CNC) technology in rapid prototyping process. Rapid prototyping (RP) can be classified into three major groups; subtractive, additive and virtual. CNC rapid prototyping is grouped under the subtractive category which involves material removal from the workpiece that is larger than the final part. Richard Wysk established the use of CNC machines for rapid prototyping using sets of 2½-D tool paths from various orientations about a rotary axis to machine parts without refixturing. Since then, there are few developments on this process mainly aimed to optimized the operation and increase the process capabilities to stand equal with common additive type of RP. These developments include the integration between machining and deposition process (hybrid RP), adoption of RP to the conventional machine and optimization of the CNC rapid prototyping process based on controlled parameters. The article ended by concluding that the CNC rapid prototyping research area has a vast space for improvement as in the conventional machining processes. Further developments and findings will enhance the usage of this method and minimize the limitation of current approach in building a prototype.

The impact of health information technology on disparity of process of care.

PubMed

Lee, Jinhyung

2015-04-01

Disparities in the quality of health care and treatment among racial or ethnic groups can result from unequal access to medical care, disparate treatments for similar severities of symptoms, and wide divergence in general health status among individuals. Such disparities may be eliminated through better use of health information technology (IT). Investment in health IT could foster better coordinated care, improve guideline compliance, and reduce the likelihood of redundant testing, thereby encouraging more equitable treatment for underprivileged populations. However, there is little research exploring the impact of health IT investment on disparities of process of care. This study examines the impact of health IT investment on waiting times - from admission to the date of first principle procedure - among different racial and ethnic groups, using patient and hospital data for the state of California collected from 2001 to 2007. The final sample includes 14,056,930 patients admitted with medical diseases to 316 unique, acute-care hospitals over a seven-year period. The linear random intercept and slope model was employed to examine the impacts of health IT investment on waiting time, while controlling for patient, disease, and hospital characteristics. Greater health IT investment was associated with shorter waiting times, and the reduction in waiting times was greater for non-White than for White patients. This indicates that minority populations could benefit from health IT investment with regard to process of care. Investments in health IT may reduce disparities in process of care.

Development of a perfusion reversed-phase high performance liquid chromatography method for the characterisation of maize products using multivariate analysis.

PubMed

Rodriguez-Nogales, J M; Garcia, M C; Marina, M L

2006-02-03

A perfusion reversed-phase high performance liquid chromatography (RP-HPLC) method has been designed to allow rapid (3.4 min) separations of maize proteins with high resolution. Several factors, such as extraction conditions, temperature, detection wavelength and type and concentration of ion-pairing agent were optimised. A fine optimisation of the gradient elution was also performed by applying experimental design. Commercial maize products for human consumption (flours, precocked flours, fried snacks and extruded snacks) were characterised for the first time by perfusion RP-HPLC and their chromatographic profiles allowed a differentiation among products relating the different technological process used for their preparation. Furthermore, applying discriminant analysis makes it possible to group the samples according with the technological process suffered by maize products, obtaining a good prediction in 92% of the samples.

Assessment of Student Learning in Modern Experiments in the Introductory Calculus-Based Physics Labs

NASA Astrophysics Data System (ADS)

Woodahl, Brian; Ross, John; Lang, Sarah; Scott, Derek; Williams, Jeremy

2010-10-01

With the advent of newer microelectronic sensors it's now possible to modernize introductory physics labs with the latest technology and this may allow for enhanced student participation/learning in the experiments. For example, force plate sensors can digitize and record the force on an object, later it can be analyzed in detail (i.e, impulse from force vs. time). Small 3-axis accelerometers can record 3-dim, time-dependent acceleration of objects undergoing complex motions. These devices are small, fairly easy to use, and importantly, are likely to enhance student learning by ``personalizing'' data collection, i.e. making the student an active part of the measurement process and no longer a passive observer. To assess whether these new high-tech labs enhance student learning, we have implemented pre- and post- test sessions to measure the effectiveness of student learning. Four of our calculus-based lab sections were used: Two sections the control group, using the previous ``old technology'' labs, the other two, the experimental group, using the new ``modern technology'' labs. Initial returns of assessment data offer some surprising insight.

Application of sperm sorting and associated reproductive technology for wildlife management and conservation.

PubMed

O'Brien, J K; Steinman, K J; Robeck, T R

2009-01-01

Efforts toward the conservation and captive breeding of wildlife can be enhanced by sperm sorting and associated reproductive technologies such as sperm cryopreservation and artificial insemination (AI). Sex ratio management is of particular significance to species which naturally exist in female-dominated social groups. A bias of the sex ratio towards females of these species will greatly assist in maintaining socially cohesive groups and minimizing male-male aggression. Another application of this technology potentially exists for endangered species, as the preferential production of females can enable propagation of those species at a faster rate. The particular assisted reproductive technology (ART) used in conjunction with sperm sorting for the production of offspring is largely determined by the quality and quantity of spermatozoa following sorting and preservation processes. Regardless of the ART selected, breeding decisions involving sex-sorted spermatozoa should be made in conjunction with appropriate genetic management. Zoological-based research on reproductive physiology and assisted reproduction, including sperm sorting, is being conducted on numerous terrestrial and marine mammals. The wildlife species for which the technology has undergone the most advance is the bottlenose dolphin. AI using sex-sorted fresh or frozen-thawed spermatozoa has become a valuable tool for the genetic and reproductive management of captive bottlenose dolphins with six pre-sexed calves, all of the predetermined sex born to date.

EarthCube - A Community-led, Interdisciplinary Collaboration for Geoscience Cyberinfrastructure

NASA Astrophysics Data System (ADS)

Dick, Cindy; Allison, Lee

2016-04-01

The US NSF EarthCube Test Enterprise Governance Project completed its initial two-year long process to engage the community and test a demonstration governing organization with the goal of facilitating a community-led process on designing and developing a geoscience cyberinfrastructure. Conclusions are that EarthCube is viable, has engaged a broad spectrum of end-users and contributors, and has begun to foster a sense of urgency around the importance of open and shared data. Levels of trust among participants are growing. At the same time, the active participants in EarthCube represent a very small sub-set of the larger population of geoscientists. Results from Stage I of this project have impacted NSF decisions on the direction of the EarthCube program. The overall tone of EarthCube events has had a constructive, problem-solving orientation. The technical and organizational elements of EarthCube are poised to support a functional infrastructure for the geosciences community. The process for establishing shared technological standards has notable progress but there is a continuing need to expand technological and cultural alignment. Increasing emphasis is being given to the interdependencies among EarthCube funded projects. The newly developed EarthCube Technology Plan highlights important progress in this area by five working groups focusing on: 1. Use cases; 2. Funded project gap analysis; 3. Testbed development; 4. Standards; and 5. Architecture. The EarthCube governance implementing processes to facilitate community convergence on a system architecture, which is expected to emerge naturally from a set of data principles, user requirements, science drivers, technology capabilities, and domain needs.

Proton-Coupled Electron Transfer in Organic Synthesis: Fundamentals, Applications, and Opportunities

PubMed Central

Miller, David C.; Tarantino, Kyle T.; Knowles, Robert R.

2016-01-01

Proton-coupled electron transfers (PCETs) are unconventional redox processes in which both protons and electrons are exchanged, often in a concerted elementary step. While PCET is now recognized to play a central a role in biological redox catalysis and inorganic energy conversion technologies, its applications in organic synthesis are only beginning to be explored. In this chapter we aim to highlight the origins, development and evolution of PCET processes most relevant to applications in organic synthesis. Particular emphasis is given to the ability of PCET to serve as a non-classical mechanism for homolytic bond activation that is complimentary to more traditional hydrogen atom transfer processes, enabling the direct generation of valuable organic radical intermediates directly from their native functional group precursors under comparatively mild catalytic conditions. The synthetically advantageous features of PCET reactivity are described in detail, along with examples from the literature describing the PCET activation of common organic functional groups. PMID:27573270

Development of archetypes for non-ranking classification and comparison of European National Health Technology Assessment systems.

PubMed

Allen, Nicola; Pichler, Franz; Wang, Tina; Patel, Sundip; Salek, Sam

2013-12-01

European countries are increasingly utilising health technology assessment (HTA) to inform reimbursement decision-making. However, the current European HTA environment is very diverse, and projects are already underway to initiate a more efficient and aligned HTA practice within Europe. This study aims to identify a non-ranking method for classifying the diversity of European HTA agencies process and the organisational architecture of the national regulatory review to reimbursement systems. Using a previously developed mapping methodology, this research created process maps to describe national processes for regulatory review to reimbursement for 33 European jurisdictions. These process maps enabled the creation of 2 HTA taxonomic sets. The confluence of the two taxonomic sets was subsequently cross-referenced to identify 10 HTA archetype groups. HTA is a young, rapidly evolving field and it can be argued that optimal practices for performing HTA are yet to emerge. Therefore, a non-ranking classification approach could objectively characterise and compare the diversity observed in the current European HTA environment. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

How can students contribute? A qualitative study of active student involvement in development of technological learning material for clinical skills training.

PubMed

Haraldseid, Cecilie; Friberg, Febe; Aase, Karina

2016-01-01

Policy initiatives and an increasing amount of the literature within higher education both call for students to become more involved in creating their own learning. However, there is a lack of studies in undergraduate nursing education that actively involve students in developing such learning material with descriptions of the students' roles in these interactive processes. Explorative qualitative study, using data from focus group interviews, field notes and student notes. The data has been subjected to qualitative content analysis. Active student involvement through an iterative process identified five different learning needs that are especially important to the students: clarification of learning expectations, help to recognize the bigger picture, stimulation of interaction, creation of structure, and receiving context- specific content. The iterative process involvement of students during the development of new technological learning material will enhance the identification of important learning needs for students. The use of student and teacher knowledge through an adapted co-design process is the most optimal level of that involvement.

Prospects for development of hydrocarbon raw materials resources reproduction

NASA Astrophysics Data System (ADS)

Vertakova, Y. V.; Babich, T. N.; Polozhentseva, Y. S.; Zvyagintsev, G. L.

2017-10-01

The article presents data on the influence of factors in the field of innovative technology of thermocatalytic depolymerization of solid household wastes (SHW) on the efficiency and prospects for the development of technogenic hydrocarbon raw materials resource reproduction. Process thermodynamics, reactions kinetics, the mechanism of thermolysis of secondary polymers in organic solvents have been studied by means of laboratory experiments. It is shown that different morphological groups of wastes dissolve practically at the same rate at temperatures of 250-310°C. A homogeneous product is formed in the liquid phase; the spread of values for the elements lies in the interval of 1.5-4.5 %; technological requirements of the stages of formation of boiler fuels are satisfied. Using the principles of patent analysis, new techniques of processing household waste components are proposed. The basics of energy-efficient and energy-saving processes of technogenic hydrocarbon raw materials resource reproduction have been laid. The possibility of increasing the production payback and intensification is shown. Ecological and demographic safety for population and technical and economic benefits from SHW processing are achieved.

77 FR 21587 - Pratt and Whitney; A Subsidiary of United Technologies Corporation Cheshire Engine Center...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... Whitney A Subsidiary of United Technologies Corporation Far Group and Experimental Test Group East... Technologies Corporation, FAR Group and Experimental Test Group, supplies/supports and operates as an extension... Test Group. The amended notice applicable to TA-W-75,152 is hereby issued as follows: ``All workers of...

Percutaneous Steerable Robotic Tool Delivery Platform and Metal MEMS Device for Tissue Manipulation and Approximation: Closure of Patent Foramen Ovale in an Animal Model

PubMed Central

Vasilyev, Nikolay V.; Gosline, Andrew H.; Butler, Evan; Lang, Nora; Codd, Patrick J.; Yamauchi, Haruo; Feins, Eric N.; Folk, Chris R.; Cohen, Adam L.; Chen, Richard; Zurakowski, David; del Nido, Pedro J.; Dupont, Pierre E

2013-01-01

Background Beating-heart image-guided intracardiac interventions have been evolving rapidly. To extend the domain of catheter-based and transcardiac interventions into reconstructive surgery, a new robotic tool delivery platform (TDP) and tissue approximation device have been developed. Initial results employing these tools to perform patent foramen ovale (PFO) closure are described. Methods and Results A robotic TDP comprised of superelastic metal tubes provides the capability of delivering and manipulating tools and devices inside the beating heart. A new device technology is also presented that utilizes a metal-based MicroElectroMechanical Systems (MEMS) manufacturing process to produce fully-assembled and fully-functional millimeter-scale tools. As a demonstration of both technologies, a PFO creation and closure was performed in a swine model. In the first group of animals (N=10), a preliminary study was performed. The procedural technique was validated with a transcardiac handheld delivery platform and epicardial echocardiography, video-assisted cardioscopy and fluoroscopy. In the second group (N=9), the procedure was performed percutaneously using the robotic TDP under epicardial echocardiography and fluoroscopy imaging. All PFO’s were completely closed in the first group. In the second group, the PFO was not successfully created in 1 animal, and the defects were completely closed in 6 of the 8 remaining animals. Conclusions In contrast to existing robotic catheter technologies, the robotic TDP utilizes a combination of stiffness and active steerability along its length to provide the positioning accuracy and force application capability necessary for tissue manipulation. In combination with a MEMS tool technology, it can enable reconstructive procedures inside the beating heart. PMID:23899870

Mobile platform for treatment of stroke: A case study of tele-assistance

PubMed Central

Torres Zenteno, Arturo Henry; Fernández, Francisco; Palomino-García, Alfredo; Moniche, Francisco; Escudero, Irene; Jiménez-Hernández, M Dolores; Caballero, Auxiliadora; Escobar-Rodriguez, Germán; Parra, Carlos

2015-01-01

This article presents the technological solution of a tele-assistance process for stroke patients in acute phase in the Seville metropolitan area. The main objective of this process is to reduce time from symptom onset to treatment of acute phase stroke patients by means of telemedicine, regarding mobility between an intensive care unit ambulance and an expert center and activating the pre-hospital care phase. The technological platform covering the process has been defined following an interoperability model based on standards and with a focus on service-oriented architecture focus. Messaging definition has been designed according to the reference model of the CEN/ISO 13606, messages content follows the structure of archetypes. An XDS-b (Cross-Enterprise Document Sharing-b) transaction messaging has been designed according to Integrating the Healthcare Enterprise profile for archetype notifications and update enquiries.This research has been performed by a multidisciplinary group. The Virgen del Rocío University Hospital acts as Reference Hospital and the Public Company for Healthcare as mobility surroundings. PMID:25975806

Developing Technological Pedagogical Content Knowledge (TPACK) in Animal Physiology

NASA Astrophysics Data System (ADS)

Pusparini, F.; Riandi, R.; Sriyati, S.

2017-09-01

The purpose of this study is to describe pre-service teacher’s learning during lecturing Animal Physiology and investigate it’s impact on pre-service teacher’s technological pedagogical content knowledge (TPACK). How was the lecturing process can improve TPACK of preservice teacher on Biology education espescially in Animal Physiology. There are four experiment classes using Solomon four group design, there are pedagogic treatment, content treatment and technological treatment, the last class without any treatment. Both quantitative and qualitative data were collected. Quantitative data were collected through a questionaire of TPACK. Qualitative data were collected through a lesson plan and teaching simulation. Findings has revealed that participants experienced significant gains in all TPACK constructs. Both of pedagogic and technology treatment is better than others, but pedagogical treatment didn’t also increase PCK most of participants. Findings has implications for teacher education programs to be a professional teachers and for researchers interested.

Developing Technological Pedagogical Content Knowledge (TPACK) in Animal Physiology

NASA Astrophysics Data System (ADS)

Pusparini, F.; Riandi, R.; Sriyati, S.

2017-09-01

The purpose of this study is to describe preservice teacher’s learning during lecturing Animal Physiology and investigate it’s impact on preservice teacher’s technological pedagogical content knowledge (TPACK). How was the lecturing process can improve TPACK of preservice teacher on Biology education espescially in Animal Physiology. There are four experiment classes using Solomon four group design, there are pedagogic treatment, content treatment and technological treatment, the last class without any treatment. Both quantitative and qualitative data were collected. Quantitative data were collected through a questionaire of TPACK. Qualitative data were collected through a lesson plan and teaching simulation. Findings has revealed that participants experienced significant gains in all TPACK constructs. Both of pedagogic and technology treatment is better than others, but pedagogical treatment didn’t also increase PCK most of participants. Findings has implications for teacher education programs to be a professional teachers and for researchers interested.

An innovative capstone health care informatics clinical residency: Interprofessional team collaboration.

PubMed

Custis, Laura M; Hawkins, Shelley Y; Thomason, Tanna R

2017-03-01

Integrated information systems and wireless technology have been increasingly incorporated into health care organizations with the premise that information technology will promote safe, high-quality, cost-effective patient care. With the advancement of technology, the level of expertise necessary to assume health care information technology roles has escalated. The purpose of this article is to describe a clinical residency project whereby students in a graduate degree health care informatics program successfully fulfilled program competencies through a faculty-lead research project focused on the use of home telehealth with a group of heart failure patients. Through the use of Donabedian's framework of structure, process, and outcomes, the health care informatics students completed essential learning activities deemed essential for transition into the role of an informatics specialist. Health care informatics educational leaders are encouraged to adapt this template of applied learning into their practices.

Technology User Groups and Early Childhood Education: A Preliminary Study

ERIC Educational Resources Information Center

Parette, Howard P.; Hourcade, Jack J.; Blum, Craig; Watts, Emily H.; Stoner, Julia B.; Wojcik, Brian W.; Chrismore, Shannon B.

2013-01-01

This article presents a preliminary examination of the potential of Technology User Groups as a professional development venue for early childhood education professionals in developing operational and functional competence in using hardware and software components of a Technology toolkit. Technology user groups are composed of varying numbers of…

Technological viewpoints (frames) about electronic prescribing in physician practices.

PubMed

Agarwal, Ritu; Angst, Corey M; DesRoches, Catherine M; Fischer, Michael A

2010-01-01

Physician practices may adopt and use electronic prescribing (eRx) in response to mandates, incentives, and perceived value of the technology. Yet, for the most part, diffusion has been limited and geographically confined, and even when adopted, use of eRx in many practices has been low. One explanation for this phenomenon is that decision-makers in the practices possess different technological viewpoints (frames) related to eRx and these frames have formed the basis for the adoption decision, expectations about the technology, and patterns of use. In this study eRx technological frames were examined. Focus groups, direct observation, and semi-structured interviews were conducted with physicians, practice managers, nurses, and other medical staff. Focus groups were observed, taped, transcribed, and analyzed to reveal themes. These themes guided the observational visits and subsequent interviews. A triangulation process was used to confirm the findings. Seven frames emerged from the qualitative analysis ranging from positive to neutral to negative: (1) eRx as an efficiency and effectiveness enhancing tool; (2) eRx as the harbinger of new practices; (3) eRx as core to the clinical workflow; (4) eRx as an administrative tool; (5) eRx: the artifact; (6) eRx as a necessary evil; and (7) eRx as an unwelcome disruption. Frames provide a unique perspective within which to explore the adoption and use of eRx and may explain why perceptions of value vary greatly. Some frames facilitate effective use of eRx while others impose barriers. Electronic prescribing can be viewed as a transitional technology on the path to greater digitization at the physician practice level. Understanding the impact of technological frames on the effectiveness of eRx use may provide lessons for the implementation of future health information technology innovations.

Technological viewpoints (frames) about electronic prescribing in physician practices

PubMed Central

Agarwal, Ritu; DesRoches, Catherine M; Fischer, Michael A

2010-01-01

Objective Physician practices may adopt and use electronic prescribing (eRx) in response to mandates, incentives, and perceived value of the technology. Yet, for the most part, diffusion has been limited and geographically confined, and even when adopted, use of eRx in many practices has been low. One explanation for this phenomenon is that decision-makers in the practices possess different technological viewpoints (frames) related to eRx and these frames have formed the basis for the adoption decision, expectations about the technology, and patterns of use. In this study eRx technological frames were examined. Design Focus groups, direct observation, and semi-structured interviews were conducted with physicians, practice managers, nurses, and other medical staff. Measurements Focus groups were observed, taped, transcribed, and analyzed to reveal themes. These themes guided the observational visits and subsequent interviews. A triangulation process was used to confirm the findings. Results Seven frames emerged from the qualitative analysis ranging from positive to neutral to negative: (1) eRx as an efficiency and effectiveness enhancing tool; (2) eRx as the harbinger of new practices; (3) eRx as core to the clinical workflow; (4) eRx as an administrative tool; (5) eRx: the artifact; (6) eRx as a necessary evil; and (7) eRx as an unwelcome disruption. Conclusion Frames provide a unique perspective within which to explore the adoption and use of eRx and may explain why perceptions of value vary greatly. Some frames facilitate effective use of eRx while others impose barriers. Electronic prescribing can be viewed as a transitional technology on the path to greater digitization at the physician practice level. Understanding the impact of technological frames on the effectiveness of eRx use may provide lessons for the implementation of future health information technology innovations. PMID:20595310

Pyrometallurgical Recovery of Platinum Group Metals from Spent Catalysts

NASA Astrophysics Data System (ADS)

Peng, Zhiwei; Li, Zhizhong; Lin, Xiaolong; Tang, Huimin; Ye, Lei; Ma, Yutian; Rao, Mingjun; Zhang, Yuanbo; Li, Guanghui; Jiang, Tao

2017-09-01

As an important secondary resource with abundant platinum group metals (PGMs), spent catalysts demand recycling for both economic and environmental benefits. This article reviews the main pyrometallurgical processes for PGM recovery from spent catalysts. Existing processes, including smelting, vaporization, and sintering processes, are discussed based in part on a review of the physiochemical characteristics of PGMs in spent catalysts. The smelting technology, which produces a PGM-containing alloy, is significantly influenced by the addition of various collectors, such as lead, copper, iron, matte, or printed circuit board (PCB), considering their chemical affinities for PGMs. The vaporization process can recover PGMs in vapor form at low temperatures (250-700°C), but it suffers high corrosion and potential environmental and health risks as a result of involvement of the hazardous gases, mainly Cl2 and CO. The sintering process serves as a reforming means for recycling of the spent catalysts by in situ reduction of their oxidized PGMs components. Among these processes, the smelting process seems more promising although its overall performance can be further improved by seeking a suitable target-oriented collector and flux, together with proper pretreatment and process intensification using an external field.

Health and Wellness Technology Use by Historically Underserved Health Consumers: Systematic Review

PubMed Central

Perchonok, Jennifer

2012-01-01

Background The implementation of health technology is a national priority in the United States and widely discussed in the literature. However, literature about the use of this technology by historically underserved populations is limited. Information on culturally informed health and wellness technology and the use of these technologies to reduce health disparities facing historically underserved populations in the United States is sparse in the literature. Objective To examine ways in which technology is being used by historically underserved populations to decrease health disparities through facilitating or improving health care access and health and wellness outcomes. Methods We conducted a systematic review in four library databases (PubMed, PsycINFO, Web of Science, and Engineering Village) to investigate the use of technology by historically underserved populations. Search strings consisted of three topics (eg, technology, historically underserved populations, and health). Results A total of 424 search phrases applied in the four databases returned 16,108 papers. After review, 125 papers met the selection criteria. Within the selected papers, 30 types of technology, 19 historically underserved groups, and 23 health issues were discussed. Further, almost half of the papers (62 papers) examined the use of technology to create effective and culturally informed interventions or educational tools. Finally, 12 evaluation techniques were used to assess the technology. Conclusions While the reviewed studies show how technology can be used to positively affect the health of historically underserved populations, the technology must be tailored toward the intended population, as personally relevant and contextually situated health technology is more likely than broader technology to create behavior changes. Social media, cell phones, and videotapes are types of technology that should be used more often in the future. Further, culturally informed health information technology should be used more for chronic diseases and disease management, as it is an innovative way to provide holistic care and reminders to otherwise underserved populations. Additionally, design processes should be stated regularly so that best practices can be created. Finally, the evaluation process should be standardized to create a benchmark for culturally informed health information technology. PMID:22652979

Users perspectives on interactive distance technology enabling home-based motor training for stroke patients.

PubMed

Ehn, Maria; Hansson, Pär; Sjölinder, Marie; Boman, Inga-Lill; Folke, Mia; Sommerfeld, Disa; Borg, Jörgen; Palmcrantz, Susanne

2015-01-01

The aim of this work has been to develop a technical support enabling home-based motor training after stroke. The basis for the work plan has been to develop an interactive technical solution supporting three different groups of stroke patients: (1) patients with stroke discharged from hospital with support from neuro team; (2) patients with stroke whose support from neuro team will be phased out and (3) patients living with impaired motor functions long-term. The technology has been developed in close collaboration with end-users using a method earlier evaluated and described [12]. This paper describes the main functions of the developed technology. Further, results from early user-tests with end-users, performed to identify needs for improvements to be carried out during further technical development. The developed technology will be tested further in a pilot study of the safety and, usefulness of the technology when applied as a support for motor training in three different phases of the post-stroke rehabilitation process.

Technologies and Applications of Airborne Power Ultrasound in Food Processing

NASA Astrophysics Data System (ADS)

Gallego-Juárez, Juan A.; Riera, Enrique

Applications of ultrasonic waves are generally divided into two groups: low intensity and high intensity. Low-intensity applications are those wherein the objective is to obtain information about the propagation medium without producing any modification of its state. On the contrary, high-intensity applications are those wherein ultrasonic energy is used to produce permanent changes in the treated medium.

External Group Coaching and Mentoring: Building a Research Community of Practice at a University of Technology

ERIC Educational Resources Information Center

Maritz, Jeanette; Visagie, Retha; Johnson, Bernadette

2013-01-01

Globally, a clarion call has been made for higher education institutions to establish creative and effective research capacity-building systems with the purpose of developing a next generation of scholars. The training and skills development of a researcher entail a process of increasing levels of participation in diverse communities of practice.…

Technical Proceedings fo the Symposium on Military Information Systems Engineering (Panel 11 on Information Processing Technology, Defence Research Group).

DTIC Science & Technology

1991-12-27

session. The following gives the flavour of the comments made. 17. Prototyping captures requirements. The prototype exercises requirements and allows the...can modify the data in a given sub-set. These sub-sets can be used as granules of database distribu- tion in order to simplify access control. (3

Frontiers in Educational Computing. Association for Educational Data Systems Annual Convention Proceedings (21st, Portland, Oregon, May 9-13, 1983).

ERIC Educational Resources Information Center

Association for Educational Data Systems, Washington, DC.

The 98 papers in this collection examine a wide variety of topics related to the latest technological developments as they apply to the educational process. Papers are grouped to reflect common, broad areas of interest, representing the instructional, administrative, and computer science divisions of the Association for Educational Data Systems…

2016 Summer Series - Terry Fong - Planetary Exploration Reinvented

NASA Image and Video Library

2016-07-07

The allure of deep space drives humanity’s curiosity to further explore the universe, but the risks associated with spaceflight are still limiting. Technological advancements in robotics and data processing are pushing the envelope of Human planetary exploration and habitation. Dr. Terry Fong from the NASA Ames’ Intelligent Robotics Group will describe how we are reinventing the approach to explore the universe.

Using Neural Net Technology To Enhance the Efficiency of a Computer Adaptive Testing Application.

ERIC Educational Resources Information Center

Van Nelson, C.; Henriksen, Larry W.

The potential for computer adaptive testing (CAT) has been well documented. In order to improve the efficiency of this process, it may be possible to utilize a neural network, or more specifically, a back propagation neural network. The paper asserts that in order to accomplish this end, it must be shown that grouping examinees by ability as…

Handling Disruptive Innovations in HE: Lessons from Two Contrasting Case Studies

ERIC Educational Resources Information Center

Powell, Stephen; Olivier, Bill; Yuan, Li

2015-01-01

This article aims to show how Higher Education Institutions (HEIs) can recognise and best respond to a disruptive innovation. A disruptive innovation creates a new business model using a new process and usually a new technology to offer a product or service with new features and/or lower cost and initially addresses a group of people who are…

A Case Study on the Reforms of Dance in Higher Education in Taiwan

ERIC Educational Resources Information Center

Tai, Juan-Ann

2012-01-01

This case study focuses on a group of teachers' and students' opinions regarding the recent reforms in the dance department of Tainan University of Technology (TUT) in Taiwan. The author uses Pierre Bourdieu's theory of forms of capital and symbolic violence to probe for the motivation, process and consequences of the changes brought about by…

Energy Smart Schools--Applied Research, Field Testing, and Technology Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nebiat Solomon; Robin Vieira; William L. Manz

2004-12-01

The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among statemore » and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.« less

The effectiveness of Family Science and Technology Workshops on parental involvement, student achievement, and student curiosity

NASA Astrophysics Data System (ADS)

Kosten, Lora Bechard

The literature suggests that parental involvement in schools results in positive changes in students and that schools need to provide opportunities for parents to share in the learning process. Workshops are an effective method of engaging parents in the education of their children. This dissertation studies the effects of voluntary Family Science and Technology Workshops on elementary children's science interest and achievement, as well as on parents' collaboration in their child's education. The study involved 35 second and third-grade students and their parents who volunteered to participate. The parental volunteers were randomly assigned to either the control group (children attending the workshops without a parent) or the treatment group (children attending the workshops with a parent). The study was conducted in the Fall of 1995 over a four-week period. The Analysis of Variance (ANOVA) and Kruskal-Wallis tests were used to determine the effects of the workshops on children's science achievement and science curiosity, as well as on parents' involvement with their child's education. The study revealed that there was no significant statistical difference at the.05 level between the treatment/control groups in children's science achievement or science curiosity, or in parent's involvement with their children's education. However, the study did focus parental attention on effective education and points the way to more extensive research in this critical learning area. This dual study, that is, the effects of teaching basic technology to young students with the support of their parents, reflects the focus of the Salve Regina University Ph.D. program in which technology is examined in its effects on humans. In essence, this program investigates what it means to be human in an age of advanced technology.

Digital communication between clinician and patient and the impact on marginalised groups: a realist review in general practice

PubMed Central

Huxley, Caroline J; Atherton, Helen; Watkins, Jocelyn Anstey; Griffiths, Frances

2015-01-01

Background Increasingly, the NHS is embracing the use of digital communication technology for communication between clinicians and patients. Policymakers deem digital clinical communication as presenting a solution to the capacity issues currently faced by general practice. There is some concern that these technologies may exacerbate existing inequalities in accessing health care. It is not known what impact they may have on groups who are already marginalised in their ability to access general practice. Aim To assess the potential impact of the availability of digital clinician–patient communication on marginalised groups’ access to general practice in the UK. Design and setting Realist review in general practice. Method A four-step realist review process was used: to define the scope of the review; to search for and scrutinise evidence; to extract and synthesise evidence; and to develop a narrative, including hypotheses. Results Digital communication has the potential to overcome the following barriers for marginalised groups: practical access issues, previous negative experiences with healthcare service/staff, and stigmatising reactions from staff and other patients. It may reduce patient-related barriers by offering anonymity and offers advantages to patients who require an interpreter. It does not impact on inability to communicate with healthcare professionals or on a lack of candidacy. It is likely to work best in the context of a pre-existing clinician–patient relationship. Conclusion Digital communication technology offers increased opportunities for marginalised groups to access health care. However, it cannot remove all barriers to care for these groups. It is likely that they will remain disadvantaged relative to other population groups after their introduction. PMID:26622034

Technology-enhanced focus groups as a component of instrument development.

PubMed

Strout, Tania D; DiFazio, Rachel L; Vessey, Judith A

2017-06-22

Background Bullying is a critical public health problem and a screening tool for use in healthcare is needed. Focus groups are a common tool for generating qualitative data when developing an instrument and evidence suggests that technology-enhanced focus groups can be effective in simultaneously engaging participants from diverse settings. Aim To examine the use of technology-enhanced focus groups in generating an item pool to develop a youth-bullying screening tool. Discussion The authors explore methodological and ethical issues related to conducting technology-enhanced focus groups, drawing on their experience in developing a youth-bullying measure. They conducted qualitative focus groups with professionals from the front lines of bullying response and intervention. They describe the experience of conducting technology-enhanced focus group sessions, focusing on the methodological and ethical issues that researchers engaging in similar work may encounter. Challenges associated with this methodology include establishing rapport among participants, privacy concerns and limited non-verbal communication. Conclusion The use of technology-enhanced focus groups can be valuable in obtaining rich data from a wide variety of disciplines and contexts. Organising these focus groups was inexpensive and preferred by the study's participants. Implications for practice Researchers should consider using technology-enhanced focus groups to generate data to develop health-related measurement tools.

Materials processing in space program tasks

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1982-01-01

Active research areas as of the end of the fiscal year 1982 of the Materials Processing in Space Program, NASA-Office of Space and Terrestrial Applications, involving several NASA centers and other organizations are highlighted to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The program is described as well as its history, strategy and overall goal; the organizational structures and people involved are identified and each research task is described together with a list of recent publications. The tasks are grouped into four categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies.

Nanotube Production Devices Expand Research Capabilities

NASA Technical Reports Server (NTRS)

2012-01-01

In order for the Hubble Space Telescope to take incredible, never-seen-before shots of celestial bodies and then send them back to Earth, the spacecraft needs power. While in orbit, Hubble cannot plug into an electrical outlet or stop at a store for some batteries. One of the ways NASA supplies power aboard a spacecraft is by harnessing energy from the most powerful entity in the solar system: the Sun. Since the 1960s, photovoltaic technology, or technology that converts sunlight into electricity, has been instrumental in the exploration of space. To build upon existing photovoltaic technology, NASA s Glenn Research Center has worked on a variety of innovative designs and materials to incorporate into photovoltaic cells, the building blocks of solar power systems. One of these materials is the carbon nanotube - a tiny structure about 50,000 times finer than the average human hair, with notably high electrical and thermal conductivity and an extreme amount of mechanical strength. Such properties give carbon nanotubes great potential to enhance the reliability of power generation and storage devices in space and on Earth. Dennis J. Flood, the branch chief of the photovoltaic division at Glenn in the 1990s, was looking into using carbon nanotubes to improve the efficiency of solar cells when he ran into a major roadblock - high-quality carbon nanotubes were not readily available. To address this problem, one of the chemists in Flood s group came up with a process and system for growing them. A senior chemist at Glenn, Aloysius F. Hepp, devised an injection chemical vapor deposition process using a specific organometallic catalyst in a two-zone furnace. Hepp's group found the unique process produced high-quality carbon nanotubes with less than 5 percent metal impurity. In addition, the process was more efficient than existing techniques, as it eliminated pre-patterning of the substrate used for growing the nanotubes, a timely and cost-prohibitive step.

The potential of technology for enhancing individual placement and support supported employment.

PubMed

Lord, Sarah E; McGurk, Susan R; Nicholson, Joanne; Carpenter-Song, Elizabeth A; Tauscher, Justin S; Becker, Deborah R; Swanson, Sarah J; Drake, Robert E; Bond, Gary R

2014-06-01

The potential of technology to enhance delivery and outcomes of Individual Placement and Support (IPS) supported employment. IPS supported employment has demonstrated robust success for improving rates of competitive employment among individuals with psychiatric disabilities. Still, a majority of those with serious mental illnesses are not employed (Bond, Drake, & Becker, 2012). The need to promote awareness of IPS and expand services is urgent. In this study, we describe ways that technologies may enhance delivery of IPS supported employment across the care continuum and stakeholder groups. Directions for research are highlighted. published literature, clinical observations, IPS learning collaborative. Technology has the potential to enhance direct service as well as workflow in the IPS supported employment process, which may lead to improved fidelity and client outcomes. Mobile and cloud technologies open opportunities for collaboration, self-directed care, and ongoing support to help clients obtain and maintain meaningful employment. Research is needed to evaluate efficacy of technology-based approaches for promoting client employment outcomes, to identify provider and organization barriers to using technology for IPS delivery, and to determine effective strategies for implementing technology with IPS in different settings and with diverse client audiences.

The Potential of Technology for Enhancing Individual Placement and Support Supported Employment

PubMed Central

Lord, Sarah E.; McGurk, Susan R.; Nicholson, Joanne; Carpenter-Song, Elizabeth A.; Tauscher, Justin S.; Becker, Deborah R.; Swanson, Sarah J.; Drake, Robert E.; Bond, Gary R.

2015-01-01

Topic The potential of technology to enhance delivery and outcomes of Individual Placement and Support (IPS) supported employment. Purpose IPS supported employment has demonstrated robust success for improving rates of competitive employment among individuals with psychiatric disabilities. Still, a majority of those with serious mental illnesses are not employed (Bond, Drake, & Becker, 2012). The need to promote awareness of IPS and expand services is urgent. In this study, we describe ways that technologies may enhance delivery of IPS supported employment across the care continuum and stakeholder groups. Directions for research are highlighted. Sources Used published literature, clinical observations, IPS learning collaborative. Conclusions and Implications for Practice Technology has the potential to enhance direct service as well as workflow in the IPS supported employment process, which may lead to improved fidelity and client outcomes. Mobile and cloud technologies open opportunities for collaboration, self-directed care, and ongoing support to help clients obtain and maintain meaningful employment. Research is needed to evaluate efficacy of technology-based approaches for promoting client employment outcomes, to identify provider and organization barriers to using technology for IPS delivery, and to determine effective strategies for implementing technology with IPS in different settings and with diverse client audiences. PMID:24912058

The review of recent carbonate minerals processing technology

NASA Astrophysics Data System (ADS)

Solihin

2018-02-01

Carbonate is one of the groups of minerals that can be found in relatively large amount in the earth crust. The common carbonate minerals are calcium carbonate (calcite, aragonite, depending on its crystal structure), magnesium carbonate (magnesite), calcium-magnesium carbonate (dolomite), and barium carbonate (barite). A large amount of calcite can be found in many places in Indonesia such as Padalarang, Sukabumi, and Tasikmalaya (West Java Provence). Dolomite can be found in a large amount in Gresik, Lamongan, and Tuban (East Java Provence). Magnesite is quite rare in Indonesia, and up to the recent years it can only be found in Padamarang Island (South East Sulawesi Provence). The carbonate has been being exploited through open pit mining activity. Traditionally, calcite can be ground to produce material for brick production, be carved to produce craft product, or be roasted to produce lime for many applications such as raw materials for cement, flux for metal smelting, etc. Meanwhile, dolomite has traditionally been used as a raw material to make brick for local buildings and to make fertilizer for coconut oil plant. Carbonate minerals actually consist of important elements needed by modern application. Calcium is one of the elements needed in artificial bone formation, slow release fertilizer synthesis, dielectric material production, etc. Magnesium is an important material in automotive industry to produce the alloy for vehicle main parts. It is also used as alloying element in the production of special steel for special purpose. Magnesium oxide can be used to produce slow release fertilizer, catalyst and any other modern applications. The aim of this review article is to present in brief the recent technology in processing carbonate minerals. This review covers both the technology that has been industrially proven and the technology that is still in research and development stage. One of the industrially proven technologies to process carbonate mineral is the production of magnesium metals from dolomite. The discussion is emphasized to the requirements of certain aspects prior to the application of this technology in Indonesia. Other technologies that are still in research and development stage are also presented and discussed. The discussion is aimed to find further possible research and development in carbonate processing.

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders.

PubMed

Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M

2016-05-03

There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale.

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders

PubMed Central

Wouters, Eveline JM; Luijkx, Katrien G; Vrijhoef, Hubertus JM

2016-01-01

Background There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. Objective To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Methods Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Results Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults’ needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Conclusions Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale. PMID:27143097

HOSPITAL-BASED HEALTH TECHNOLOGY ASSESSMENT IN IRAN.

PubMed

Mohtasham, Farideh; Majdzadeh, Reza; Jamshidi, Ensiyeh

2017-01-01

Hospitals with health technology assessment (HTA) programs have reported its positive effects on the management of resources and costs. This study aimed to identify the barriers faced by hospital-based HTA (HBHTA) in Iran by inductive content analysis of stakeholders' and decision-makers' points of view. The key individuals and organizations that could provide rich, relevant, and diverse data in response to the research question were purposively selected for the interviews and focus group discussion. Twelve stakeholders from seven public hospitals participated in the interviews. Another eighteen stakeholders from twelve HBHTA-related organizations took part in the focus group discussion. Most of the hospitals' senior management team did not feel the need for HBHTA and believed that in Iran a systematic process like HTA faces many challenges. The stakeholders participating in this study highlighted the significance of certain points that needed to be addressed before establishing HBHTA in Iran.

Research on cultivating medical students' self-learning ability using teaching system integrated with learning analysis technology.

PubMed

Luo, Hong; Wu, Cheng; He, Qian; Wang, Shi-Yong; Ma, Xiu-Qiang; Wang, Ri; Li, Bing; He, Jia

2015-01-01

Along with the advancement of information technology and the era of big data education, using learning process data to provide strategic decision-making in cultivating and improving medical students' self-learning ability has become a trend in educational research. Educator Abuwen Toffler said once, the illiterates in the future may not be the people not able to read and write, but not capable to know how to learn. Serving as educational institutions cultivating medical students' learning ability, colleges and universities should not only instruct specific professional knowledge and skills, but also develop medical students' self-learning ability. In this research, we built a teaching system which can help to restore medical students' self-learning processes and analyze their learning outcomes and behaviors. To evaluate the effectiveness of the system in supporting medical students' self-learning, an experiment was conducted in 116 medical students from two grades. The results indicated that problems in self-learning process through this system was consistent with problems raised from traditional classroom teaching. Moreover, the experimental group (using this system) acted better than control group (using traditional classroom teaching) to some extent. Thus, this system can not only help medical students to develop their self-learning ability, but also enhances the ability of teachers to target medical students' questions quickly, improving the efficiency of answering questions in class.

Discovering Network Structure Beyond Communities

NASA Astrophysics Data System (ADS)

Nishikawa, Takashi; Motter, Adilson E.

2011-11-01

To understand the formation, evolution, and function of complex systems, it is crucial to understand the internal organization of their interaction networks. Partly due to the impossibility of visualizing large complex networks, resolving network structure remains a challenging problem. Here we overcome this difficulty by combining the visual pattern recognition ability of humans with the high processing speed of computers to develop an exploratory method for discovering groups of nodes characterized by common network properties, including but not limited to communities of densely connected nodes. Without any prior information about the nature of the groups, the method simultaneously identifies the number of groups, the group assignment, and the properties that define these groups. The results of applying our method to real networks suggest the possibility that most group structures lurk undiscovered in the fast-growing inventory of social, biological, and technological networks of scientific interest.

Maintaining patients' social contacts through displaying nonverbal awareness information on mobile devices.

PubMed

Ruschin, Detlef

2015-01-01

Awareness systems had been invented for supporting groups collaborating simultaneously over a network. They provide each group member with real-time information about the state of affairs on the remote locations of the other members. Awareness systems have also been observed to help remote collaborators develop the same shared sense of community that often emerges within co-located work groups, and this effect of creating or maintaining group cohesion is an important goal in itself. Purely social awareness systems can be employed by any kind of group, e.g. families, without shared work tasks. As a means of preventing loneliness they can be regarded as examples of biomedical technology. In this paper a demonstrator of an awareness-enhanced instant messaging system for elderly living alone is described along with assumptions about group processes that led to its specification.

Information technology systems in public sector health facilities in developing countries: the case of South Africa

PubMed Central

2013-01-01

Background The public healthcare sector in developing countries faces many challenges including weak healthcare systems and under-resourced facilities that deliver poor outcomes relative to total healthcare expenditure. Global references demonstrate that information technology has the ability to assist in this regard through the automation of processes, thus reducing the inefficiencies of manually driven processes and lowering transaction costs. This study examines the impact of hospital information systems implementation on service delivery, user adoption and organisational culture within two hospital settings in South Africa. Methods Ninety-four interviews with doctors, nurses and hospital administrators were conducted in two public sector tertiary healthcare facilities (in two provinces) to record end-user perceptions. Structured questionnaires were used to conduct the interviews with both qualitative and quantitative information. Results Noteworthy differences were observed among the three sample groups of doctors, nurses and administrators as well as between our two hospital groups. The impact of automation in terms of cost and strategic value in public sector hospitals is shown to have yielded positive outcomes with regard to patient experience, hospital staff workflow enhancements, and overall morale in the workplace. Conclusion The research provides insight into the reasons for investing in system automation, the associated outcomes, and organisational factors that impact the successful adoption of IT systems. In addition, it finds that sustainable success in these initiatives is as much a function of the technology as it is of the change management function that must accompany the system implementation. PMID:23347433

Information technology systems in public sector health facilities in developing countries: the case of South Africa.

PubMed

Cline, Gregory B; Luiz, John M

2013-01-24

The public healthcare sector in developing countries faces many challenges including weak healthcare systems and under-resourced facilities that deliver poor outcomes relative to total healthcare expenditure. Global references demonstrate that information technology has the ability to assist in this regard through the automation of processes, thus reducing the inefficiencies of manually driven processes and lowering transaction costs. This study examines the impact of hospital information systems implementation on service delivery, user adoption and organisational culture within two hospital settings in South Africa. Ninety-four interviews with doctors, nurses and hospital administrators were conducted in two public sector tertiary healthcare facilities (in two provinces) to record end-user perceptions. Structured questionnaires were used to conduct the interviews with both qualitative and quantitative information. Noteworthy differences were observed among the three sample groups of doctors, nurses and administrators as well as between our two hospital groups. The impact of automation in terms of cost and strategic value in public sector hospitals is shown to have yielded positive outcomes with regard to patient experience, hospital staff workflow enhancements, and overall morale in the workplace. The research provides insight into the reasons for investing in system automation, the associated outcomes, and organisational factors that impact the successful adoption of IT systems. In addition, it finds that sustainable success in these initiatives is as much a function of the technology as it is of the change management function that must accompany the system implementation.

The Still Bay and Howiesons Poort at Sibudu and Blombos: Understanding Middle Stone Age Technologies.

PubMed

Soriano, Sylvain; Villa, Paola; Delagnes, Anne; Degano, Ilaria; Pollarolo, Luca; Lucejko, Jeannette J; Henshilwood, Christopher; Wadley, Lyn

2015-01-01

The classification of archaeological assemblages in the Middle Stone Age of South Africa in terms of diversity and temporal continuity has significant implications with respect to recent cultural evolutionary models which propose either gradual accumulation or discontinuous, episodic processes for the emergence and diffusion of cultural traits. We present the results of a systematic technological and typological analysis of the Still Bay assemblages from Sibudu and Blombos. A similar approach is used in the analysis of the Howiesons Poort (HP) assemblages from Sibudu seen in comparison with broadly contemporaneous assemblages from Rose Cottage and Klasies River Cave 1A. Using our own and published data from other sites we report on the diversity between stone artifact assemblages and discuss to what extent they can be grouped into homogeneous lithic sets. The gradual evolution of debitage techniques within the Howiesons Poort sequence with a progressive abandonment of the HP technological style argues against the saltational model for its disappearance while the technological differences between the Sibudu and Blombos Still Bay artifacts considerably weaken an interpretation of similarities between the assemblages and their grouping into the same cultural unit. Limited sampling of a fragmented record may explain why simple models of cultural evolution do not seem to apply to a complex reality.

The Still Bay and Howiesons Poort at Sibudu and Blombos: Understanding Middle Stone Age Technologies

PubMed Central

Soriano, Sylvain; Villa, Paola; Delagnes, Anne; Degano, Ilaria; Pollarolo, Luca; Lucejko, Jeannette J.; Henshilwood, Christopher; Wadley, Lyn

2015-01-01

The classification of archaeological assemblages in the Middle Stone Age of South Africa in terms of diversity and temporal continuity has significant implications with respect to recent cultural evolutionary models which propose either gradual accumulation or discontinuous, episodic processes for the emergence and diffusion of cultural traits. We present the results of a systematic technological and typological analysis of the Still Bay assemblages from Sibudu and Blombos. A similar approach is used in the analysis of the Howiesons Poort (HP) assemblages from Sibudu seen in comparison with broadly contemporaneous assemblages from Rose Cottage and Klasies River Cave 1A. Using our own and published data from other sites we report on the diversity between stone artifact assemblages and discuss to what extent they can be grouped into homogeneous lithic sets. The gradual evolution of debitage techniques within the Howiesons Poort sequence with a progressive abandonment of the HP technological style argues against the saltational model for its disappearance while the technological differences between the Sibudu and Blombos Still Bay artifacts considerably weaken an interpretation of similarities between the assemblages and their grouping into the same cultural unit. Limited sampling of a fragmented record may explain why simple models of cultural evolution do not seem to apply to a complex reality. PMID:26161665

[Educational geronto-technology for ostomized seniors from a complexity perspective].

PubMed

Barros, Edaiane Joana Lima; Santos, Silvana Sidney Costa; Gomes, Giovana Calcagno; Erdmann, Alacoque Lorenzini

2012-06-01

We aimed to present the educational booklet as a geronto-technological product for caring for ostomized seniors from a complexity perspective. This was accomplished in the second semester of 2007 in a hospital in the south of Brazil. The data were collected through interviews and presented in the form of an educational booklet. The booklet was validated by ostomized seniors and by a nurse who had been working with these elderly patients. The booklet was presented as a geronto-technology able to help ostomized seniors and their families understand the rights of ostomized people; concepts and types of stomas; care of ostomy; and the importance of the family and the support group for care. In conclusion, the educational booklet is presented as a health promotion tool which makes the health educative process easier.

Semantic Technologies and Bio-Ontologies.

PubMed

Gutierrez, Fernando

2017-01-01

As information available through data repositories constantly grows, the need for automated mechanisms for linking, querying, and sharing data has become a relevant factor both in research and industry. This situation is more evident in research fields such as the life sciences, where new experiments by different research groups are constantly generating new information regarding a wide variety of related study objects. However, current methods for representing information and knowledge are not suited for machine processing. The Semantic Technologies are a set of standards and protocols that intend to provide methods for representing and handling data that encourages reusability of information and is machine-readable. In this chapter, we will provide a brief introduction to Semantic Technologies, and how these protocols and standards have been incorporated into the life sciences to facilitate dissemination and access to information.

Techniques and recommendations for the inclusion of users with autism in the design of assistive technologies.

PubMed

Francis, Peter; Mellor, David; Firth, Lucy

2009-01-01

The increasing numbers of technology platforms offer opportunities to develop new visual assistive aids for people with autism. However, their involvement in the design of such aids is critical to their short-term uptake and longer term use. Using a three-round Delphi study involving seven Australian psychologists specializing in treating people with autism, the authors explored the utility of four techniques that might be implemented to involve users with autism in the design process. The authors found that individual users from the target group would be likely to respond differently to the techniques and that no technique was clearly better than any other. Recommendations for using these techniques to involve individuals with autism in the design of assistive technologies are suggested.

Organizational and technological insight as important factors for successful implementation of IT.

PubMed

Nikula, R E

1999-01-01

Politicians and hospital management in Sweden and Denmark focus on IT and especially Electronic Patient Record, EPR as a tool for changes that will lead to better economy as well as better quality and service to the patients. These changes are not direct effects of the new medium for patient records but indirect effects due to the possibilities embedded in the new technology. To ensure that the implementation is successful, i.e. leads to changes in organization structure and workflow, we need tools to prepare clinicians and management. The focus of this paper is the individual insight in technology and organization and it proposes a model to assess and categorize the possibilities of individuals and groups to participate in and make an implementation process powerful.

Recent Cooperative Research Activities of HDD and Flexible Media Transport Technologies in Japan

NASA Astrophysics Data System (ADS)

Ono, Kyosuke

This paper presents the recent status of industry-university cooperative research activities in Japan on the mechatronics of information storage and input/output equipment. There are three research committees for promoting information exchange on technical problems and research topics of head-disk interface in hard disk drives (HDD), flexible media transport and image printing processes which are supported by the Japan Society of Mechanical Engineering (JSME), the Japanese Society of Tribologists (JAST) and the Japan Society of Precision Engineering (JSPE). For hard disk drive technology, the Storage Research Consortium (SRC) is supporting more than 40 research groups in various different universities to perform basic research for future HDD technology. The past and present statuses of these activities are introduced, particularly focusing on HDD and flexible media transport mechanisms.

Microbial trophic interactions and mcrA gene expression in monitoring of anaerobic digesters

PubMed Central

Alvarado, Alejandra; Montañez-Hernández, Lilia E.; Palacio-Molina, Sandra L.; Oropeza-Navarro, Ricardo; Luévanos-Escareño, Miriam P.; Balagurusamy, Nagamani

2014-01-01

Anaerobic digestion (AD) is a biological process where different trophic groups of microorganisms break down biodegradable organic materials in the absence of oxygen. A wide range of AD technologies is being used to convert livestock manure, municipal and industrial wastewaters, and solid organic wastes into biogas. AD gains importance not only because of its relevance in waste treatment but also because of the recovery of carbon in the form of methane, which is a renewable energy and is used to generate electricity and heat. Despite the advances on the engineering and design of new bioreactors for AD, the microbiology component always poses challenges. Microbiology of AD processes is complicated as the efficiency of the process depends on the interactions of various trophic groups involved. Due to the complex interdependence of microbial activities for the functionality of the anaerobic bioreactors, the genetic expression of mcrA, which encodes a key enzyme in methane formation, is proposed as a parameter to monitor the process performance in real time. This review evaluates the current knowledge on microbial groups, their interactions, and their relationship to the performance of anaerobic biodigesters with a focus on using mcrA gene expression as a tool to monitor the process. PMID:25429286

The 2010 AOP Workshop Summary Report

NASA Technical Reports Server (NTRS)

Hooker, Stanford B.; Morrow, John H.; Brown, James W.; Firestone, Elaine R.

2011-01-01

The rationale behind the current workshop, which was hosted by Biospherical Instruments Inc. (BSI), was to update the community and get community input with respect to the following: topics not addressed during the first workshop, specifically the processing of above-water apparent optical property (AOP data) within the Processing of Radiometric Observations of Seawater using Information Technologies (PROSIT) architecture; PROSIT data processing issues that have developed or tasks that have been completed, since the first workshop; and NASA instrumentation developments, both above- and in-water, that are relevant to both workshops and next generation mission planning. The workshop emphasized presentations on new AOP instrumentation, desired and required features for processing above-water measurements of the AOPs of seawater, working group discussions, and a community update for the in-water data processing already present in PROSIT. The six working groups were organized as follows: a) data ingest and data products; b) required and desired features for optically shallow and optically deep waters; c) contamination rejection (clouds), corrections, and data filtering; d) sun photometry and polarimetry; e) instrumentation networks; and f) hyperspectral versus fixed-wavelength sensors. The instrumentation networks working group was intended to provide more detailed information about desired and required features of autonomous sampling systems. Plenary discussions produced a number of recommendations for evolving and documenting PROSIT.

Group-based variant calling leveraging next-generation supercomputing for large-scale whole-genome sequencing studies.

PubMed

Standish, Kristopher A; Carland, Tristan M; Lockwood, Glenn K; Pfeiffer, Wayne; Tatineni, Mahidhar; Huang, C Chris; Lamberth, Sarah; Cherkas, Yauheniya; Brodmerkel, Carrie; Jaeger, Ed; Smith, Lance; Rajagopal, Gunaretnam; Curran, Mark E; Schork, Nicholas J

2015-09-22

Next-generation sequencing (NGS) technologies have become much more efficient, allowing whole human genomes to be sequenced faster and cheaper than ever before. However, processing the raw sequence reads associated with NGS technologies requires care and sophistication in order to draw compelling inferences about phenotypic consequences of variation in human genomes. It has been shown that different approaches to variant calling from NGS data can lead to different conclusions. Ensuring appropriate accuracy and quality in variant calling can come at a computational cost. We describe our experience implementing and evaluating a group-based approach to calling variants on large numbers of whole human genomes. We explore the influence of many factors that may impact the accuracy and efficiency of group-based variant calling, including group size, the biogeographical backgrounds of the individuals who have been sequenced, and the computing environment used. We make efficient use of the Gordon supercomputer cluster at the San Diego Supercomputer Center by incorporating job-packing and parallelization considerations into our workflow while calling variants on 437 whole human genomes generated as part of large association study. We ultimately find that our workflow resulted in high-quality variant calls in a computationally efficient manner. We argue that studies like ours should motivate further investigations combining hardware-oriented advances in computing systems with algorithmic developments to tackle emerging 'big data' problems in biomedical research brought on by the expansion of NGS technologies.

The Effect of Adaptive Nonlinear Frequency Compression on Phoneme Perception.

PubMed

Glista, Danielle; Hawkins, Marianne; Bohnert, Andrea; Rehmann, Julia; Wolfe, Jace; Scollie, Susan

2017-12-12

This study implemented a fitting method, developed for use with frequency lowering hearing aids, across multiple testing sites, participants, and hearing aid conditions to evaluate speech perception with a novel type of frequency lowering. A total of 8 participants, including children and young adults, participated in real-world hearing aid trials. A blinded crossover design, including posttrial withdrawal testing, was used to assess aided phoneme perception. The hearing aid conditions included adaptive nonlinear frequency compression (NFC), static NFC, and conventional processing. Enabling either adaptive NFC or static NFC improved group-level detection and recognition results for some high-frequency phonemes, when compared with conventional processing. Mean results for the distinction component of the Phoneme Perception Test (Schmitt, Winkler, Boretzki, & Holube, 2016) were similar to those obtained with conventional processing. Findings suggest that both types of NFC tested in this study provided a similar amount of speech perception benefit, when compared with group-level performance with conventional hearing aid technology. Individual-level results are presented with discussion around patterns of results that differ from the group average.