Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Assessment of the effect of No Stay, Bent Stay or Straight Stay when the Clothe the Soldier Rucksack is Worn with the Fragmentation Vest

DTIC Science & Technology

2006-02-01

effets de différents renforts de sac à dos (renforts droits, renforts courbés et aucun renfort) sur la...supérieures au seuil de tolérance de la peau et des muscles sous-jacents, et elles pourraient causer des lésions sur la peau et des ecchymoses. Assessment...présente évaluation portait sur cette pratique et visait à déterminer les effets de différents renforts de sac à dos (renforts droits, renforts courbés

A Survey of Serious Aircraft Accidents Involving Fatigue Fracture. Volume 1. Fixed-Wing Aircraft (Etude sur des Accidents Importants d’Avions du aux Effets des Fractures de Fatigue. Volume 1. Effets sur des Avions).

DTIC Science & Technology

1983-04-01

Bureau of Standards. NTS3 National Transportation Safety Board (USA). NTSB AAR NTSB Aircraft Accident Report. NZ AAR New Zealand Aircraft Accident Report...NZ AI New Zealand Accident Investigation Bureau. 0 -5- RAN Royal Australian Navy RAAI Royal Australian Air Force RAF Royal Air Force, UK S Substantial...Ice land Iraq Ireland Jamaica (1966 -1981) Japan (1973 - Feb. 81) Kenya Lethoso Malaysia Ma law i Mal ta Mexico Netherlands New Zealand Norway

Evaluation d'impact sur la santé et évaluation d'impact sur l'équité en santé : éventail de pratiques et questions de recherche.

PubMed

Villeval, Mélanie; Bidault, Elsa; Lang, Thierry

2016-09-01

L'Evaluation d'Impact sur la Santé (EIS) se développe au niveau international et est encore au stade émergent en France. Elle vise à évaluer les effets positifs et négatifs potentiels d'un projet, d'un programme ou d'une politique sur la santé. L'objectif est de produire des recommandations en direction des décideurs, afin d'en maximiser les effets positifs et d'en diminuer les effets négatifs. L'EIS est un moyen particulièrement intéressant d'action sur les déterminants de la santé au-delà des comportements individuels et du système de santé. Les politiques de logement, de transport, de solidarité, économiques, etc. ont, en effet, des impacts souvent non prévus sur la santé. Au-delà des effets sur la santé, l'EIS doit aussi permettre d'apprécier la distribution de ces effets dans la population.Si la préoccupation pour l'équité en santé est centrale dans l'EIS, elle reste cependant difficilement traduite en pratique. Face à cette difficulté, des démarches d'évaluation d'impact ont été développées pour renforcer la prise en compte de l'équité à chaque étape de l'EIS ou « Equity Focused Health Impact Assessment », ou prendre en compte les impacts sur les inégalités de santé de façon spécifique. Ainsi, l'Evaluation de l'Impact sur l'Equité en Santé (EIES) semble, par exemple, particulièrement intéressante pour évaluer l'impact sur les inégalités de projets dans le champ sanitaire.L'EIS et l'EIES posent de nombreuses questions de recherche, notamment autour de la réunion, dans une même démarche, du politique, du citoyen et de l'expert. La participation des populations vulnérables potentiellement affectées par la politique évaluée est une valeur centrale de l'EIS, mais pose des questions d'acceptabilité sociale. La collaboration avec les décideurs politiques est également un enjeu majeur. Les difficultés méthodologiques, notamment de quantification des impacts, peuvent constituer des freins à la promotion de la démarche auprès des décideurs. © The Author(s) 2015.

Les effets bénéfiques de l'accompagnement du patient cancéreux: particularités du Maroc

PubMed Central

Lkhoyaali, Sihame; Aitelhaj, Meryem; Errihani, Hassan

2014-01-01

Au Maroc la majorité des patients âgés cancéreux sont pris en charge par leurs proches l'accompagnement des patients est à l'origine de conséquences émotionnelles psychiques et financières négatives mais en contrepartie il est à l'origine de plusieurs effets bénéfiques à savoir un resserrement des liens familiaux, une surestime du soi et il est la source d'un bien-être affectif et spirituel qui permet de faire face à la maladie. PMID:25722766

Development of a Dynamic Biomechanical Model for Load Carriage: Phase IV Part C1: Assessment of Pressure Measurement Systems on Flat Surfaces for use in Human Load Carriage

DTIC Science & Technology

2005-08-01

iv Sommaire Les études sur les effets de la pression de contact produite par une charge d’un sac à dos sont essentielles, étant...mobilité des soldats et amenuiser leur capacité de combat. Afin de mieux comprendre les effets de la pression d’un sac à dos sur le confort et la... de mesure de pression qui pourraient être utilisés pour établir les valeurs de tolérance de la peau aux pressions durant le transport d’une charge

Consequences experimentales des effets des fluctuations du vide sur la fluorescence parametrique et la generation du second harmonique en milieu confine

NASA Astrophysics Data System (ADS)

Robichaud, Luc

Les fluctuations du vide, qui consistent en l'apparition momentanee de particules, ce qui est permit par le principe d'incertitude de Heisenberg, joue un role primordial dans les processus photoniques, en particulier les processus non-lineaires. Par la manipulation de ces fluctuations du vide a l'aide de confinement optique, on retrouve deux phenomenes particuliers : l'intensification de la fluorescence parametrique (Walker, 2008) et l'inhibition de la generation du second harmonique (Collette, 2013). Dans ce travail, on presente les resultats dans le cas classique ; c'est-a-dire sans fluctuations du vide et confinement. Par la suite, on presente les effets des fluctuations du vide et du confinement, ce qui mene aux deux effets mentionnes. Dans le cas de la fluorescence parametrique, le bruit quantique sur le champ interne et externe est calcule, le role du desaccord de phase dans le modele est expose et une generalisation tridimensionnelle est etudiee afin de generaliser la conception du modele d'un cas unidimensionnel a un cas tridimensionnel planaire. Dans le cas de la generation du second harmonique, les difficultes d'un modele purement tridimensionnel sont exposees et ensuite le cas limite planaire est etudie.

Gravitational lensing in observational cosmology

NASA Astrophysics Data System (ADS)

Nottale, L.

This paper reviews some previous theoretical and observational results concerning the various effects of gravitational lensing, and also presents still unpublished results in this field. The theoretical section deals with the Optical Scalar Equation (OSE) approach. We recall the form of these equations, which relate the deformations of the cross sectional area of a light beam to the material and energetic distribution it encounters, via the two basic contributions to lensing, the matter or Ricci term and the shear term. The introduction of a new distance, the optical distance, allows to write the OSE in a simplified way from which new solutions are easily derived. We demonstrate here that a general form may be obtained for the amplification formula in the exact relativistic treatment, provided the Universe is assumed to be Friedmannian in the mean. New results are also presented concerning the probability distribution of amplifications, the relation from matter term to shear terms (the first ones give the mean of the second ones) and the problem of energy conservation. We recall how our method let to an analytical formula yielding the amplification by any number of lenses placed anywhere along the line of sight and present new general solutions for lensing by large scale density inhomogeneities. The gravitational redshift effects are also considered, either due to the crossing by photons of inhomogeneities, or intrinsic to them ; generalized solutions to the last problem are given. Some observational evidence concerning various lensing effects, either statistical or applying to individual sources, are considered. We first recall how the dependence of the amplification formula on the various physical parameters points towards the optimisation of lensing by very rich clusters of galaxies lying at redshifts around 0.7, which may give rise to very large amplifications for reasonable values of the density parameter. Recent results concerning a statistical effect of amplification of Brightest Cluster Galaxies by foreground clusters are analysed, including the discussion of a selection effect precisely due to gravitational luminosity amplification. It results in an artificial increase of the deceleration parameter of the Universe measured from the Hubble diagram of these objects. We recall our proposal that the sample of distant 3C radiogalaxies of redshift > 1 is strongly perturbed by lensing effects, mostly by foreground clusters of galaxies (i.e. only the luminosity is changed without image multiplication), but also for some objects by galaxies, producing gravitational mirages. The case of 3C324, for which definite evidence for multiple imaging has been recently obtained, is described, including detailed modelling of the lensing configuration. We present a highly significant statistical effect of lensing on absorption line QSOs due to matter lying at the absorption redshifts. Microlensing is also considered, and we recall our recent proposal that the variability of some among the OVV QSOs turning to BL Lac at maximum brightness, like the eruptive object 0846 +51W1, is a consequence of microlensing by stars or compact objects constituting foreground galaxy halos. Finally, discrepant redshift associations are considered. We recall how the case of anomalous quintets of galaxies have been explained by the gravitational lensing effects of quartets halos on background galaxies. Then we present evidence that the Arp QSO-galaxy associations may be the result of the combined lensing effects of several superposed galaxies, groups and clusters. Cet article présente une revue de certains résultats théoriques et observationnels concernant les divers effets de lentille gravitationnelle, complétée par des résultats nouveaux non encore publiés. Dans la partie théorique, nous considérons essentiellement l'approche relativiste employant les équations scalaires optiques. La forme de ces équations est rappelée : elles relient les diverses déformations subies par la section d'un faisceau lumineux au cours de sa propagation, à la distribution matérielle et énergétique qu'il rencontre sur son trajet entre la source et l'observateur. Les deux contributions aux effets d'optique apparaissant dans ces équations (et leurs solutions) sont les termes de matière et les termes de cisaillement. Nous montrons comment une nouvelle distance peut être introduite, la distance optique, en fonction de laquelle les équations se simplifient et de nouvelles solutions analytiques peuvent être établies. En particulier, nous démontrons que la formule d'amplification gravitationnelle peut s'écrire sous une forme très générale sous la simple hypothèse que l'Univers est en moyenne de type Friedmann-Robertson-Walker. De nouveaux résultats sont aussi présentés concernant la distribution de probabilité des amplifications, les rapports entre termes de matière et termes de cisaillement (les premiers donnant la moyenne des seconds), et le problème de la conservation de l'énergie. Nous rappelons comment une formule analytique peut être obtenue pour des amplifications multiples et présentons des solutions nouvelles au problème de l'amplification par des hétérogénéités à très grande échelle. Enfin, les effets de décalages spectraux gravitationnels sont aussi considérés, qu'ils soient dus à des effets de traversée d'excès de densité, ou intrinsèques à ceux-ci ; dans ce dernier cas, une généralisation de solutions déjà connues est proposée. On considère ensuite le problème de la mise en évidence observationnelle des divers effets d'optique gravitationnelle, qu'ils soient de nature statistique ou qu'ils concernent des objets individuels. A la suite d'une analyse décrivant la dépendance de la formule d'amplification en fonction des différents paramètres y intervenant, nous insistons tout particulièrement sur le rôle cosmologique que jouent probablement les amas de galaxies très riches de décalages spectraux autour de 0,7 qui peuvent donner lieu à des amplifications quasi-infinies. La mise en évidence récente d'un effet statistique d'amplification par des amas d'avant-plan sur les galaxies les plus brillantes des amas est rappelée, ainsi que celle d'un important effet de sélection observationnel, précisément dû aux amplifications, qui augmente artificiellement la valeur de q0 mesurée à partir du diagramme de Hubble. L'extrapolation de cet effet à des objets plus lointains nous a conduit à proposer que les radiogalaxies lointaines du catalogue 3C de z < 1 étaient fortement affectées par les effets de lentille gravitationnelle, essentiellement par les amas (qui les amplifient la plupart du temps sans multiplication d'image), mais aussi dans certains cas par des galaxies qui peuvent alors provoquer des effets de mirage. Le cas de 3C324, pour lequel des preuves observationelles de multiplication d'image ont été récemment obtenues, est analysé en particulier ; un modèle détaillé en est présenté. Un autre effet statistique récemment démontré concerne les quasars à raies d'absorption, dont la luminosité est fortement corrélée à l'amplification prédite par de la matière située aux décalages spectraux d'absorption. On considère également les effets de microlentille : nous rappelons notre proposition récente que la variabilité de certains OVVs tels que le BL Lac éruptif 0846 + 51W1 est une conséquence du passage d'étoiles ou d'objets compacts du halo de galaxies intervenantes devant les régions centrales d'un quasar. Le lien entre effets d'optique gravitationnelle et associations de décalages spectraux discordants est évoqué. Le cas des quintets de galaxies discordant a été récemment expliqué par les effets (amplification, agrandissement, changement de densité superficielle d'objets lointains) des halos de groupes compacts de galaxies. Nous démontrons pour finir que les associations QSOsgalaxies de Arp peuvent s'expliquer par les effets de lentille gravitationnelle combinés de plusieurs galaxies, groupes et amas vus en superposition.

Development of a Dynamic Biomechanical Model for Load Carriage: Phase V: Development of the Biomechanical Model by Means of the Portable Measurement System

DTIC Science & Technology

2005-05-01

Résumé La performance opérationnelle des soldats dépend d’un certain nombre de facteurs, dont la charge de travail physiologique, les effets ...particulièrement à la charge de travail physiologique et aux effets biomécaniques, et à perfectionner la mise au point d’un modèle biomécanique dynamique (DBM...on a créé une couche de peau possédant des propriétés appropriées pour le modèle de torse et on a réalisé la modélisation de tous les composants

Comparaison des effets des irradiations γ, X et UV dans les fibres optiques

NASA Astrophysics Data System (ADS)

Girard, S.; Ouerdane, Y.; Baggio, J.; Boukenter, A.; Meunier, J.-P.; Leray, J.-L.

2005-06-01

Les fibres optiques présentent de nombreux avantages incitant à les intégrer dans des applications devant résister aux environnements radiatifs associés aux domaines civil, spatial ou militaire. Cependant, leur exposition à un rayonnement entraîne la création de défauts ponctuels dans la silice amorphe pure ou dopée qui constitue les différentes parties de la fibre optique. Ces défauts causent, en particulier, une augmentation transitoire de l'atténuation linéique des fibres optiques responsable de la dégradation voire de la perte du signal propagé dans celles-ci. Dans cet article, nous comparons les effets de deux types d'irradiation: une impulsion X et une dose γ cumulée. Les effets de ces irradiations sont ensuite comparés avec ceux induits par une insolation ultraviolette (244 nm) sur les propriétés d'absorption des fibres optiques. Nous montrons qu'il existe des similitudes entre ces différentes excitations et qu'il est possible, sous certaines conditions, d'utiliser celles-ci afin d'évaluer la capacité de certaines fibres optiques à fonctionner dans un environnement nucléaire donné.

Antisuperconductors: Properties of Layered Compounds with Coupling

NASA Astrophysics Data System (ADS)

Carton, J.-P.; Lammert, P. E.; Prost, J.

1995-11-01

In this note, we consider properties of a hypothetical superconductor composed of Josephson-coupled microscopic layers with tunneling energy minimized at a phase difference of π. The non-zero phase offset in the ground state engenders an intriguing interplay between the superconductive ordering and structural lattice defects. Unusual magnetic properties are expected in the case of highly disordered crystals, which are consistent with observations of a “paramagnetic Meissner” or “Wohlleben” effect in high-T_c cuprate superconductors. Dans cette note, nous considérons les propriétés d'un supraconducteur hypothétique composé de couches microscopiques, couplées par effet Josephson, mais dont l'énergie de couplage est minimisée pour une différence de phase de π. L'état de base a des propriétés fascinantes dues à l'effet combiné de l'ordre supraconducteur et des défauts structuraux du cristal. Dans le cas de cristaux très désordonnés, on attend des propriétés magnétiques exceptionnelles, qui sont compatibles avec les observations dans quelques supraconducteurs cuprate haute-T_c d'un effet “Meissner paramagnétique” ou “Wohlleben”.

Etude par resistivite electrique du comportement d'un alliage amorphe Fe 40Ni 38Mo 4B 18 deforme par traction

NASA Astrophysics Data System (ADS)

Hoang, Long Phan; Sacovy, Paulette; Delaplace, Jean

1983-02-01

Des rubans d'alliages amorphes Metglas du type Fe 40Ni 38Mo 4B 18 à l'état brut de trempe ont été déformés par traction à la température ambiante et l'on a suivi les variations de la résistance électrique des échantillons au cours de la déformation. Il ressort de ces essais que la déformation plastique qui est de l'ordre de 0.5% avant rupture ne se produit pas de faĉon homogène dans l'échantillon. Les mesures électriques effectuées au cours de la déformation mettent en évidence dans le domaine élastique un effet d'élastorésistance, relativement important ( K ≠ 1); elles montrent que dans le domaine plastique la déformation permanente des échantillons s'accompagne d'une diminution de la résistivité électrique du matériau. Deux hypothèses sont discutées pour expliquer cet effet inattendu, l'un qui fait appel à l'existence de volumes libres, l'autre qui suppose une cristallisation localisée du matériau sous l'effet de la contrainte.

Nanoparticules d'or: De l'imagerie par resonance magnetique a la radiosensibilisation

NASA Astrophysics Data System (ADS)

Hebert, Etienne M.

Cette thèse approfondit l'étude de nanoparticules d'or de 5 nm de diamètre recouvertes de diamideéthanethioldiethylènetriaminepentacétate de gadolinium (DTDTPA:Gd), un agent de contraste pour l'imagerie par résonance magnétique (IRM). En guise de ciblage passif, la taille des nanoparticules a été contrôlée afin d'utiliser le réseau de néovaisseaux poreux et perméable des tumeurs. De plus les tumeurs ont un drainage lymphatique déficient qui permet aux nanoparticules de demeurer plus longtemps dans le milieu interstitiel de la tumeur. Les expériences ont été effectuées sur des souris Balb/c femelles portant des tumeurs MC7-L1. La concentration de nanoparticules a pu être mesurée à l'IRM in vivo. La concentration maximale se retrouvait à la fin de l'infusion de 10 min. La concentration s'élevait à 0.3 mM dans la tumeur et de 0.12 mM dans le muscle environnant. Les nanoparticules étaient éliminées avec une demi-vie de 22 min pour les tumeurs et de 20 min pour le muscle environnant. Les nanoparticules ont été fonctionnalisées avec le peptide Tat afin de leur conférer des propriétés de ciblage actif La rétention de ces nanoparticules a ainsi été augmentée de 1600 %, passant d'une demi-vie d'élimination de 22 min à 350 min. La survie des souris a été mesurée à l'aide de courbes Kaplan-Meier et d'un modèle mathématique évalue l'efficacité de traitements. Le modèle nous permet, à l'aide de la vitesse de croissance des tumeurs et de l'efficacité des traitements, de calculer la courbe de survie des spécimens. Un effet antagoniste a été observé au lieu de l'effet synergétique attendu entre une infusion de Au@DTDTPA:Gd et l'irradiation aux rayons X. L'absence d'effet synergétique a été attribuée à l'épaisseur du recouvrement de DTDTPA:Gd qui fait écran aux électrons produits par l'or. De plus, le moyen d'ancrage du recouvrement utilise des thiols qui peuvent s'avérer être des capteurs de radicaux. De plus, contrairement a ce qui était escompté, un effet chimiothérapeutique de ces nanoparticules a été observé in vitro et in vivo. Par contre, le mécanisme précis de cet effet est encore à être expliquer, mais on sait déjà que les nanoparticules d'or affectent les fonctions des macrophages ainsi que l'angiogenèse. MOTS-CLÉS : Radiosensibilisateur, Nanoparticules d'or, Agent de contraste pour l'IRM, Électrons de basses énergies, Kaplan-Meier, Effet chimiothérapeutique.

Parametrisation D'effets Non-Standard EN Phenomenologie Electrofaible

NASA Astrophysics Data System (ADS)

Maksymyk, Ivan

Cette these pat articles porte sur la parametrisation d'effets non standard en physique electrofaible. Dans chaque analyse, nous avons ajoute plusieurs operateurs non standard au lagrangien du modele standard electrofaible. Les operateurs non standard decrivent les nouveaux effets decoulant d'un modele sous-jacent non-specefie. D'emblee, le nombre d'operateurs non standard que l'on peut inclure dans une telle analyse est illimite. Mais pour une classe specifique de modeles sous-jacents, les effets non standard peuvent etre decrits par un nombre raisonnable d'operateurs. Dans chaque analyse nous avons developpe des expressions pour des observables electrofaibles, en fonction des coefficients des operateurs nouveaux. En effectuant un "fit" statistique sur un ensemble de donnees experimentales precises, nous avons obtenu des contraintes phenomenologiques sur ces coefficients. Dans "Model-Independent Global Constraints on New Physics", nous avons adopte des hypotheses tres peu contraignantes relatives aux modeles sous-jacents. Nous avons tronque le lagrangien effectif a la dimension cinq (inclusivement). Visant la plus grande generalite possible, nous avons admis des interactions qui ne respectent pas les symetries discretes (soit C, P et CP) ainsi que des interactions qui ne conservent pas la saveur. Le lagrangien effectif contient une quarantaine d'operateurs nouveaux. Nous avons determine que, pour la plupart des coefficients des nouveaux operateurs, les contraintes sont assez serrees (2 ou 3%), mais il y a des exceptions interessantes. Dans "Bounding Anomalous Three-Gauge-Boson Couplings", nous avons determine des contraintes phenomenologiques sur les deviations des couplages a trois bosons de jauge par rapport aux interactions prescrites par le modele standard. Pour ce faire, nous avons calcule les contributions indirectes des CTBJ non standard aux observables de basse energie. Puisque le lagrangien effectif est non-renormalisable, certaines difficultes techniques se posent: pour regulariser les integrales de Feynman les chercheurs se sont generalement servi de la methode de coupure, mais cette methode peut mener a des resultats incorrects. Nous avons opte pour une technique alternative: la regularisation dimensionnelle et la "soustraction minimale avec decouplage". Dans "Beyond S, T and U" nous presentons le formalisme STUVWX, qui est une extension du formalisme STU de Peskin et Takeuchi. Ces formalismes sont bases sur l'hypothese que la theorie sous-jacente se manifeste au moyen de self -energies de bosons de jauge. Ce type d'effet s'appelle 'oblique'. A la base du formalisme STU se trouve la supposition que l'echelle de la nouvelle physique, M, est beaucoup plus grande que q, l'echelle a laquelle on effectue des mesures. Il en resulte que les effets obliques se parametrisent par les trois variables S, T et U. Par contre, dans le formalisme STUVWX, nous avons admis la possibilite que M~ q. Dans "A Global Fit to Extended Oblique Parameters", nous avons effectue deux fits statistiques sur un ensemble de mesures electrofaibles de haute precision. Dans le premier fit, nous avons pose V=W=X=0, obtenant ainsi des contraintes pour l'ensemble {S,T,U}. Dans le second fit, nous avons inclus tous les six parametres.

Systemes Fermioniques a Basse Dimension D'espace: Supraconductivite, Effet Hall Quantique et Statistique Fractionnaire

NASA Astrophysics Data System (ADS)

Sakhi, Said

Cette these est constituee de trois sujets de recherche distincts. Les deux premiers articles traitent du phenomene de supraconductivite dans un modele bidimensionnel, dans le troisieme article on etudie l'action effective d'un systeme electronique soumis a l'effet d'un champ magnetique (systeme de Hall) et le dernier article examine la quantification d'un systeme de particules identiques en deux dimensions d'espace et la possibilite des anyons. Le modele qu'on analyse dans les deux premiers articles est un systeme fermionique dont les particules chargees et de masse nulle interagissent entre elles avcc un couplage attractif et fort. L'analyse de l'action effective decrivant la physique a basse energie nous permet d'examiner la structure de l'espace de phase. A temperature nulle, le parametre d'ordre du systeme prend une valeur moyenne non nulle. Consequemment, la symetrie continue U(1) du modele est spontanement brisee et il en resulte l'apparition d'un mode de Goldstone. En presence d'un champ electromagnetique externe, ce mode disparait et le champ de jauge acquiert une masse donc l'effet Meissner caracteristique d'un supraconducteur. Bien que le modele ne soit pas renormalisable dans le sens perturbatif, on montre qu'il l'est dans le cadre du developpement en 1/N ou N est le nombre d'especes fermioniques. En outre, on montre que l'inclusion des effets thermiques change radicalement le mecanisme de supraconductivite. En effet, on montre que la brisure spontanee de la symetrie U(1) n'est plus possible a temperature finie a cause de tres severes divergences infrarouges. Par contre, la dynamique des tourbillons (vortex) existant dans le plan devient essentielle. On montre que le phenomene de supraconductivite resulte du confinement de ces objets topologiques et que la temperature critique s'identifie a celle de Kosterlitz -Thouless. Ce mecanisme de supraconductivite presente l'avantage d'aboutir a un rapport gap a la temperature critique plus eleve que celui du modele de BCS et la non violation de la symetrie par renversement du temps et de l'espace contrairement au modele anyonique. Dans le troisieme article, on a developpe une methode systematique pour calculer les determinants fermioniques en presence d'un champ magnetique perpendiculaire au plan de confinement des particules. Aussi bien les effets thermiques que ceux dus aux impuretes sont pris en consideration dans cette methode. La technique est illustree dans le cas du systeme de Hall quantique. Finalement, dans le dernier article, on discute la quantification d'un systeme de particules identiques dans le plan. Apres avoir correctement defini l'espace de phase classique du systeme, l'analyse fait ressortir deux parametres fondamentaux denotes par theta et alpha. Le premier parametre theta est associe a l'intensite du flux magnetique localise au vertex du cone et definit la statistique des particules. Pour des valeurs arbitraires de theta on parle d'anyons. L'autre parametre alpha est associe a l'extension auto-adjointe de l'hamiltonien et ressort de l'unitarite de la theorie. On montre par un exemple explicite que alpha peut etre vu comme le vestige d'une interaction a tres courte distance (haute energie) entre les particules du systeme. Finalement, on montre que le groupe de symetrie du systeme avec extension auto -adjointe n'est plus SO(2,1) car le generateur de dilatation de ce groupe n'est plus compatible avec un parametre alpha arbitraire. (Abstract shortened by UMI.).

L'effet Hall Quantique

NASA Astrophysics Data System (ADS)

Samson, Thomas

Nous proposons une methode permettant d'obtenir une expression pour la conductivite de Hall de structures electroniques bidimensionnelles et nous examinons celle -ci a la limite d'une temperature nulle dans le but de verifier l'effet Hall quantique. Nous allons nous interesser essentiellement a l'effet Hall quantique entier et aux effets fractionnaires inferieurs a un. Le systeme considere est forme d'un gaz d'electrons en interaction faible avec les impuretes de l'echantillon. Le modele du gaz d'electrons consiste en un gaz bidimensionnel d'electrons sans spin expose perpendiculairement a un champ magnetique uniforme. Ce dernier est decrit par le potentiel vecteur vec{rm A} defini dans la jauge de Dingle ou jauge symetrique. Conformement au formalisme de la seconde quantification, l'hamiltonien de ce gaz est represente dans la base des etats a un-corps de Dingle |n,m> et exprime ainsi en terme des operateurs de creation et d'annihilation correspondants a_sp{ rm n m}{dag} et a _{rm n m}. Nous supposons de plus que les electrons du niveau fondamental de Dingle interagissent entre eux via le potentiel coulombien. La methode utilisee fait appel a une equation mai tresse a N-corps, de nature quantique et statistique, et verifiant le second principe de la thermodynamique. A partir de celle-ci, nous obtenons un systeme d'equations differentielles appele hierarchie d'equations quantique dont la resolution nous permet de determiner une equation a un-corps, dite de Boltzmann quantique, et dictant l'evolution de la moyenne statistique de l'operateur non-diagonal a _sp{rm n m}{dag } a_{rm n}, _{rm m}, sous l'action du champ electrique applique vec{rm E}(t). C'est sa solution Tr(p(t) a _sp{rm n m}{dag} a_{rm n},_ {rm m}), qui definit la relation de convolution entre la densite courant de Hall vec{rm J}_{rm H }(t) et le champ electrique vec {rm E}(t) dont la transformee de Laplace-Fourier du noyau nous fournit l'expression de la conductivite de Hall desiree. Pour une valeur de facteur d'occupation (nombre d'electrons/degenerescence des etats de Dingle) superieure a un, c'est-a-dire en absence d'interaction electron-electron, il nous sera facile d'evaluer cette conductivite a la limite d'une temperature nulle et de demontrer qu'elle tend vers l'une des valeurs quantiques qe^2/h conformement a l'effet Hall quantique entier. Cependant, pour une valeur du facteur d'occupation inferieure a un, c'est-a-dire en presence d'interaction electron-electron, nous ne pourrons evaluer cette limite et obtenir les resultats escomptes a cause de l'impossibilite de determiner l'un des termes impliques. Neanmoins, ce dernier etant de nature statistique, il pourra etre aisement mis en fonction du propagateur du gaz d'electrons dont on doit maintenant determiner une expression en regime effet Hall quantique fractionnaire. Apres avoir demontre l'impuissance de la theorie des perturbations, basee sur le theoreme de Wick et la technique des diagrammes de Feynman, a accomplir cette tache correctement, nous proposons une seconde methode. Celle -ci fait appel au formalisme de l'integrale fonctionnelle et a l'utilisation d'une transformation de Hubbard-Stratonovich generalisee permettant de substituer a l'interaction a deux-corps une interaction effective a un-corps. L'expression finale obtenue bien que non completement resolue, devrait pouvoir etre estimee par une bonne approximation analytique ou au pire numeriquement.

Test Methodology for Protection of Vehicle Occupants against Anti-Vehicular Landmine Effects (Methodologie d’essais pour la protection des occupants de vehicules contre les effets des mines terrestres anti-vehicules)

DTIC Science & Technology

2007-04-01

1 Chapter 1 – Introduction 1 - 1 1.1 Background and Problem Definition 1 - 1 1.1.1...Background 1 - 1 1.1.2 Problem Definition 1 -2 1.2 The Objective and Approach of the HFM-090/TG-25 1 -2 1.2.1 Objective 1 -2 1.2.2 Approach 1 -2 1.3...Organization of this Report 1 -3 1.4 References 1 -3 Chapter 2 – The Mine Detonation Process and Occupant Loading 2- 1 2.1 Introduction to Mines 2- 1 2.2

L’effet du yoga chez les patients atteints de cancer

PubMed Central

Côté, Andréanne; Daneault, Serge

2012-01-01

Résumé Objectif Déterminer si le yoga thérapeutique améliore la qualité de vie de patients atteints de cancer. Sources des données Recherche effectuée avec la base de données MEDLINE (1950–2010) en utilisant les mots-clés yoga, cancer et quality of life. Sélection des études Priorité accordée aux études cliniques randomisées contrôlées évaluant l’effet du yoga sur différents symptômes susceptibles de se présenter chez des patients atteints de cancer en Amérique du Nord. Synthèse Quatre études cliniques randomisées contrôlées ont d’abord été analysées, puis 2 études sans groupe-contrôle. Trois études réalisées en Inde et au Proche-Orient ont également apporté des éléments intéressants au plan méthodologique. Les interventions proposées comprenaient des séances de yoga d’une durée et d’une fréquence variables. Les paramètres mesurés variaient également d’une étude à l’autre. Plusieurs symptômes ont connu des améliorations significatives avec le yoga (meilleure qualité du sommeil, diminution des symptômes anxieux ou dépressifs, amélioration du bien-être spirituel, etc.). Il a aussi semblé que la qualité de vie, dans sa globalité ou dans certaines de ses composantes spécifiques, s’améliorait. Conclusion La variété des effets bénéfiques produits, l’absence d’effet secondaire et le rapport coût-bénéfice avantageux du yoga thérapeutique en fait une intervention intéressante à suggérer par les médecins de famille aux patients atteints de cancer. Certaines lacunes méthodologiques ont pu diminuer la puissance statistique des études présentées, à commencer par la taille restreinte des échantillons et par l’assiduité variable des patients soumis à l’intervention. Il est également possible que les échelles de mesure utilisées ne convenaient pas à ce type de situation et de clientèle pour qu’en soit dégagé un effet significatif. Toutefois, les commentaires favorables des participants recueillis au cours des études et leur degré d’appréciation et de bien-être donnent à penser qu’il faille poursuivre les recherches pour mieux en comprendre les mécanismes.

Le rôle médiateur du fonctionnement familial dans la relation entre l’adversité familiale et l’adaptation sociale des enfants d’âge préscolaire1

PubMed Central

Felli, M. C.; Parent, S.; Zelazo, P. D.; Tremblay, R. E.; Séguin, J. R.

2017-01-01

Résumé À la petite enfance, l’adaptation sociale de l’enfant dépend en partie des risques auxquels il est exposé dans son environnement. Toutefois, les mécanismes par lesquels les facteurs de risque opèrent leurs influences sur l’adaptation sociale de l’enfant sont peu documentés. Ainsi, cette étude examine dans un premier temps l’effet principal de l’adversité familiale, un cumul de facteurs de risque, sur les problèmes de comportement intériorisés et extériorisés, ainsi que sur la sécurité d’attachement des enfants d’âge préscolaire. Dans un deuxième temps, elle évalue le rôle médiateur du fonctionnement familial dans le lien entre l’adversité familiale et les problèmes de comportement de même qu’entre l’adversité familiale et la sécurité d’attachement des enfants d’âge préscolaire. Les 572 participants à l’étude (n=572) sont âgés entre cinq et 42 mois lors des mesures de l’adversité familiale et de 42 mois lors de la mesure des problèmes de comportement et du fonctionnement familial. Quatre-vingt d’entre eux (n=80) ont fait l’objet d’une mesure de sécurité d’attachement à 48 mois. Les résultats indiquent, d’abord, un effet principal de l’adversité familiale sur les problèmes de comportement intériorisés et extériorisés. Un effet médiateur significatif du fonctionnement familial est ensuite rapporté dans le lien entre l’adversité familiale et les problèmes de comportement intériorisés et extériorisés. Aucun effet significatif n’est observé pour la sécurité d’attachement des enfants de 48 mois. PMID:28567062

Cold pearl surfactant-based blends.

PubMed

Crombie, R L

1997-10-01

Pearlizing agents have been used for many years in cosmetic formulations to add a pearlescent effect. Cold pearl surfactant-based blends are mixtures of glycol stearates and surfactants which can be blended in the cold into a wide range of personal-care formulations to create a pearlescent lustre effect. Under controlled manufacturing conditions constant viscosities and crystalline characteristics can be obtained. The development of these blends has been driven by efforts to improve the economics of adding solid pearlizing agents directly into a hot mix formulation. This paper summarizes the history of pearlizers, describes their advantages and physical chemistry of the manufacturing process. Finally some suggestions for applications are given. Les agents nacrants sont utilises depuis de nombreuses annees dans les formulations cosmetiques pour ajouter un effet nacre. Les melanges a froid a base de tensioactif nacre sont des melanges de stearates de glycol et de tensioactifs qui peuvent etre melanges a froid dans une large gamme de formulations d'hygiene personnelle pour creer un effet de lustre nacre. On peut obtenir des viscosites et des proprietes cristallines constantes avec des conditions de fabrication maitrisees. Le developpement de ces melanges a ete porte par les efforts pour ameliorer les couts de l'ajout d'agents nacrants solides directement dans une formulation melangee de l'ajout d'agents nacrants solides directement dans une formulation melangee a chaud. Cet article resume l'histoire des agents nacrants, decrit leurs avantages et al physico-chimie du procede de fabrication. On emet a la fin cetaines suggestions d'applications.

Internal stresses, dislocation mobility and ductility

NASA Astrophysics Data System (ADS)

Saada, G.

1991-06-01

The description of plastic deformation must take into account individual mechanisms and heterogeneity of plastic strain. Influence of dislocation interaction with forest dislocations and of cross slip are connected with the organization of dipole walls. The latter are described and their development is explained as a consequence of edge effects. Applications are discussed. La description de la déformation plastique doit prendre en compte les interactions individuelles des dislocations et l'hétérogénéité à grande échelle de la déformation plastique. Les interactions des dislocations mobiles avec la forêt de dislocations, le glissement dévié, ont pour effet la création de parois dipolaires. Celles-ci sont décrites et leur développement est appliqué à partir des effets de bord.

Effets de l'humidite sur la propagation du delaminage dans un composite carbone/epoxy sollicite en mode mixte I/II

NASA Astrophysics Data System (ADS)

LeBlanc, Luc R.

Les materiaux composites sont de plus en plus utilises dans des domaines tels que l'aerospatiale, les voitures a hautes performances et les equipements sportifs, pour en nommer quelques-uns. Des etudes ont demontre qu'une exposition a l'humidite nuit a la resistance des composites en favorisant l'initiation et la propagation du delaminage. De ces etudes, tres peu traitent de l'effet de l'humidite sur l'initiation du delaminage en mode mixte I/II et aucune ne traite des effets de l'humidite sur le taux de propagation du delaminage en mode mixte I/II dans un composite. La premiere partie de cette these consiste a determiner les effets de l'humidite sur la propagation du delaminage lors d'une sollicitation en mode mixte I/II. Des eprouvettes d'un composite unidirectionnel de carbone/epoxy (G40-800/5276-1) ont ete immergees dans un bain d'eau distillee a 70°C jusqu'a leur saturation. Des essais experimentaux quasi-statiques avec des chargements d'une gamme de mixites des modes I/II (0%, 25%, 50%, 75% et 100%) ont ete executes pour determiner les effets de l'humidite sur la resistance au delaminage du composite. Des essais de fatigue ont ete realises, avec la meme gamme de mixite des modes I/II, pour determiner 1'effet de 1'humidite sur l'initiation et sur le taux de propagation du delaminage. Les resultats des essais en chargement quasi-statique ont demontre que l'humidite reduit la resistance au delaminage d'un composite carbone/epoxy pour toute la gamme des mixites des modes I/II, sauf pour le mode I ou la resistance au delaminage augmente apres une exposition a l'humidite. Pour les chargements en fatigue, l'humidite a pour effet d'accelerer l'initiation du delaminage et d'augmenter le taux de propagation pour toutes les mixites des modes I/II. Les donnees experimentales recueillies ont ete utilisees pour determiner lesquels des criteres de delaminage en statique et des modeles de taux de propagation du delaminage en fatigue en mode mixte I/II proposes dans la litterature representent le mieux le delaminage du composite etudie. Une courbe de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les criteres de delaminage en statique etudies. Une surface de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les modeles de taux de propagation en fatigue etudies. D'apres les ajustements, le meilleur critere de delaminage en statique est le critere B-K et le meilleur modele de propagation en fatigue est le modele de Kenane-Benzeggagh. Afin de predire le delaminage lors de la conception de pieces complexes, des modeles numeriques peuvent etre utilises. La prediction de la longueur de delaminage lors des chargements en fatigue d'une piece est tres importante pour assurer qu'une fissure interlaminaire ne va pas croitre excessivement et causer la rupture de cette piece avant la fin de sa duree de vie de conception. Selon la tendance recente, ces modeles sont souvent bases sur l'approche de zone cohesive avec une formulation par elements finis. Au cours des travaux presentes dans cette these, le modele de progression du delaminage en fatigue de Landry & LaPlante (2012) a ete ameliore en y ajoutant le traitement des chargements en mode mixte I/II et en y modifiant l'algorithme du calcul de la force d'entrainement maximale du delaminage. Une calibration des parametres de zone cohesive a ete faite a partir des essais quasi-statiques experimentaux en mode I et II. Des resultats de simulations numeriques des essais quasi-statiques en mode mixte I/II, avec des eprouvettes seches et humides, ont ete compares avec les essais experimentaux. Des simulations numeriques en fatigue ont aussi ete faites et comparees avec les resultats experimentaux du taux de propagation du delaminage. Les resultats numeriques des essais quasi-statiques et de fatigue ont montre une bonne correlation avec les resultats experimentaux pour toute la gamme des mixites des modes I/II etudiee.

Inhomogeneous magnesium hydride synthesized by low temperature ion implantation: weak localization effect

NASA Astrophysics Data System (ADS)

Nédellec, P.; Dumoulin, L.; Burger, J. P.; Bernas, H.; Köstler, H.; Traverse, A.

1993-11-01

Metastable MgHx hydride was prepared by H ion implantation into Mg films at 5 K. The resistivity and magnetoresistance temperature dependence reveal weak localization effects due to atomic disorder. At low hydrogen concentrations, x le 0.3, the conductivity varies as σ sim log(T), typical of two-dimensional weak localization behaviour. The resistivity is also very sensitive to the sample inhomogeneity, due to H diffusion, which can be modelled by introducing a temperature-dependent geometrical percolating factor G. At higher H concentrations, 0.7 le x le 3, after annealing at 20 K, 50 K and 110 K, the samples also exhibit weak localization but with three-dimensional behaviour i.e. a σ sim sqrt{T}. Our analysis is consistent with the existence of an inhomogeneous system formed by a mixture of two phases with contrasted conduction properties, one of which is a well-behaved metal, while the other displays the localization properties. The results lead us to identify the former phase to a non percolating superconducting phase at low temperature. Des films d'hydrure MgHx sont préparés, hors de l'équilibre thermodynamique, par implantation d'ions H dans des films de Mg maintenus à 5 K. La mesure de la résistance et de la magnétorésistance en fonction de la température met en évidence des effets importants de localisation électronique due au désordre atomique. Pour les faibles concentrations d'hydrogène, x le 0,3, la conductivité varie comme σ sim log(T), variation caractéristique d'un comportement dominé par les effets de localisation électronique faible à 2 dimensions. La résistivité est très sensible aux effets d'inhomogénéité, liés à la diffusion de H. Nous avons modélisé ces effets en introduisant un coefficient géométrique variant avec la température. Pour les concentrations plus élevées (0, 7 le x le 3), après un recuit à 20 K, 50 K et 110 K, les films montrent également des effets de localisation mais la conductivité varie maintenant comme σ sim sqrt{T}, caractéristique d'un comportement tridimensionnel. L'analyse des résultats est compatible avec l'hypothèse d'un système inhomogène formé du mélange de deux phases avec des propriétés électriques contrastées : un “mauvais métal" et un “bon métal" qui, à basse température, pourrait présenter un état supraconducteur non percolant.

Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

PubMed Central

Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

2012-01-01

HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d’ADG. Le risque de prise de poids, d’augmentation de l’indice de masse corporelle et de taux lipidiques anormaux est plus élevé à l’utilisation d’olanzapine, suivie de la clozapine et de la quétiapine. Quant au risque d’effets secondaires neurologiques des traitements, il est plus élevé à l’utilisation de rispéridone, d’olanzapine et d’aripiprazole. Des interventions de surveillance pertinentes des effets secondaires amélioreront la qualité des soins des enfants traités à l’aide de ces médicaments. PMID:24082813

Etude des melanges co-continus d'acide polylactique et d'amidon thermoplastique (PLA/TPS)

NASA Astrophysics Data System (ADS)

Chavez Garcia, Maria Graciela

Les melanges co-continus sont des melanges polymeriques ou chaque composant se trouve dans une phase continue. Pour cette raison, les caracteristiques de chacun des composants se combinent et il en resulte un materiau avec une morphologie et des proprietes particulieres. L'acide polylactique (PLA) et l'amidon thermoplastique (TPS) sont des biopolymeres qui proviennent de ressources renouvelables et qui sont biodegradables. Dans ce projet, differents melanges de PLA et TPS a une haute concentration de TPS ont ete prepares dans une extrudeuse bi-vis afin de generer des structures co-continues. Grace a la technique de lixiviation selective, le TPS est enleve pour creer une structure poreuse de PLA qui a pu etre analysee au moyen de la microtomographie R-X et de la microscopie electronique a balayage MEB. L'analyse des images 2D et 3D confirme la presence de la structure co-continue dans les melanges dont la concentration en TPS. se situe entre 66% et 80%. L'effet de deux plastifiants, le glycerol seul et le melange de glycerol et de sorbitol, dans la formulation de TPS est etudie dans ce travail. De plus, nous avons evalue l'effet du PLA greffe a l'anhydride maleique (PLAg) en tant que compatibilisant. On a trouve que la phase de TPS obtenue avec le glycerol est plus grande. L'effet de recuit sur la taille de phases est aussi analyse. Grace aux memes techniques d'analyse, on a etudie l'effet du procede de moulage par injection sur la morphologie. On a constate que les pieces injectees presentent une microstructure heterogene et differente entre la surface et le centre de la piece. Pres de la surface, une peau plus riche en PLA est presente et les phases de TPS y sont allongees sous forme de lamelles. Plus au centre de la piece, une morphologie plus cellulaire est observee pour chaque phase continue. L'effet des formulations sur les proprietes mecaniques a aussi ete etudie. Les pieces injectees dont la concentration de TPS est plus grande presentent une moindre resistance a la traction. La presence du compatibilisant dans la region co-continue affecte negativement cette resistance. En considerant que l'amidon est un biomateriau abondant, moins cher et plus rapidement biodegradable, son ajout dans le PLA presente l'avantage de reduire le cout tout en augmentant la vitesse de degradation du PLA. De plus, une structure continue poreuse de PLA produit par la technique de lixiviation selective a des applications potentielles soit comme materiau a degradation rapide ou encore, une fois la phase TPS retiree, comme substrat a porosite ouverte pour la fabrication de membranes, de supports cellulaires ou de filtres. Mots-cles : melanges immiscibles, acide polylactique, amidon thermoplastique, morphologie cocontinue, lixiviation selective, microtomographie R-X, materiau rigide poreux biodegradable.

Comportement instationnaire des thermoéléments à effet Peltier multi-étages

NASA Astrophysics Data System (ADS)

Monchoux, F.; Zély, D.; Cordier, A.

1995-01-01

The analysis of thermoelectric phenomena is possible based on non-equilibrium thermodynamics. Integration of the thermal balance equation leads to an analytical solution for the non-stationnary behaviour. The influence to Thomson effect is commmented. The model, introduced in the complete software TRNSYS, permits the modelling of complex systems including such elements in their thermal regulation. La thermodynamique des processus irréversibles permet l'analyse des phénomènes thermoélectriques. Par intégration de l'équation de bilan thermique, on a obtenu une solution analytique pour le régime non stationnaire donnant la température en tous points et le flux absorbé. On a analysé l'influence de l'effet Thomson. Le modèle a été inclu dans le code plus général TRNSYS qui permet la modélisation de systèmes complexes.

Effets optiques et structurels de l'implantation ionique dans des couches minces polymeres

NASA Astrophysics Data System (ADS)

Cottin, Pierre

The main goal of this work is to highlight the effect of ion implantation---a widely spread technique to modify chemical, electrical or optical properties of materials---on the third order nonlinear optical properties (chi (3)) of polymers. This study was limited to four polymers (PMMA, PVK, PVA, CA) for which we developed a fabrication process to obtain high optical quality thin films and controlled thickness compatible with ion implantation depth. Moreover, these polymers show different chemical structures and have in common to have very low nonlinear optical properties. Two faces of the problem were studied. First, the chemical structure of these polymers was characterized using ultraviolet and infrared spectroscopy before and after ion implantation and then was compared with which of intrinsic nonlinear optical polymers. These analysis have clearly shown that from one hand, ion implantation leads to a great number of bond breaks but from the other hand, it creates a high concentration of conjugated bonds characteristic of nonlinear optical polymers. Second, the third order nonlinear optical properties of ion implanted polymers were measured by nonlinear waveguide coupling and by third harmonic generation. For the first method, the coupling function was performed by a diffraction grating etched in a glass substrate whose fabrication process was developed in this particular case. In both cases, the used laser wave-length was 1064 nm with pulse duration of 30 ps and 5 ns respectively. The corresponding modelization for each of these techniques was established and numerically implemented. Both techniques have shown an increase of chi(3) for these polymers after ion implantation but however, they can not reach the performance of chemically designed nonlinear optical polymers. The best results were obtained for 50 keV helium implanted PMMA given |chi(3)(-3o; o, o, o)| = 7.2 x 10-21 m2.V-2 which is six time greater than the pristine material.

Target and Clutter Scattering and their Effects on Military Radar Performance: Electromagnetic Wave Propagation Panel Specialists Meeting Held in Ottawa, Canada on 6-9 May 1991 (Diffraction par les Cibles et le Fouillis et ses Effets sur les Performances des Radars Militaires)

DTIC Science & Technology

1991-09-01

In subsequent discussions, we shall classify a clutter process to be 2-7 predominantly Rayleigh if the value of f is less than 0.8, and the Pfa ...classified as "others’, the Pfa vs threshold curve , is closer to the Ricean model than to the Rayleigh model, and the value of the parameter 0 was usually...better, and for precipitation clutter the lattice was 4 to approximation of "...equally likely". PD and PFA are 6 dB bettor, here specified a 0.5 and 0.01

Effets des radiofréquences sur le système nerveux central chez lʼhomme : EEG, sommeil, cognition, vascularisation

NASA Astrophysics Data System (ADS)

Ghosn, Rania; Villégier, Anne-Sophie; Selmaoui, Brahim; Thuróczy, Georges; de Sèze, René

2013-05-01

Most of clinical studies on radiofrequency electromagnetic fields (RF) were directed at mobile phone-related exposures, usually at the level of the head, at their effect on some physiological functions including sleep, brain electrical activity (EEG), cognitive processes, brain vascularisation, and more generally on the cardiovascular and endocrine systems. They were frequently carried out on healthy adults. Effects on the amplitude of EEG alpha waves, mainly during sleep, look reproducible. It would however be important to define more precisely whether and how the absence of electromagnetic disturbance between RF exposure and the recording systems is checked. No consensus arises about cognitive effects. Some effects on cerebral vascularisation need complementary work.

Layered superconductors in a parallel field: on the mixed state at equilibrium

NASA Astrophysics Data System (ADS)

Carton, J. P.

1991-01-01

The model describes a set of superconducting planes weakly coupled by Josephson tunnelling. When a magnetic field is applied parallel to the layers and the temperature is low enough so that the interplane coherence length is smaller than the corresponding spacing a, vortex cores fit in between two adjacent planes. In this case the mixed state is studied for high and low fields. The results are consistent with an isosceles triangle picture for the unit cell of the vortex lattice. H_{c1allel} is found to be frac{\\varphi0}{4πλ_Jλ}lnfrac{λ}{a} where λ and λ_J are the two penetration lengths. Le modèle décrit un ensemble de plans supraconducteurs faiblement couplés par effet Josephson. Quand un champ magnétique est appliqué parallèlement aux couches et que la températures est assez basse pour que la longueur de cohérence entre plans soit inférieure à leur distance a, les coeurs de vortex s'ajustent entre deux plans consécutifs. L'état mixte est étudié dans ce cas pour des champs forts et des champs faibles. Les résultats sont compatibles avec un triangle isocèle comme cellule de base du réseau de vortex. On trouve H_{c1allel}=frac{\\varphi0}{4πλ_Jλ}lnλ/a ou λ et λ_J sont les deux longueurs de pénétration.

Effets non lineaires transversaux dans les guides d'ondes plans

NASA Astrophysics Data System (ADS)

Dumais, Patrick

Les effets non lineaires transversaux dus a l'effet Kerr optique non resonant sont etudies dans deux types de guides a geometrie plane. D'abord (au chapitre 2), l'emission de solitons spatiaux d'un guide de type canal est etudie historiquement, analytiquement et numeriquement dans le but d'en faire la conception et la fabrication, en AlGaAs, dans la region spectrale en deca de la moitie de la bande interdite de ce materiau, soit autour de 1,5 microns. Le composant, tel que concu, comporte une structure de multipuits quantiques. Le desordonnement local de cette structure permet une variation locale du coefficient Kerr dans le guide, ce qui mene a l'emission d'un soliton spatial au-dela d'une puissance optique de seuil. L'observation experimentale d'un changement en fonction de l'intensite du profil de champ a la sortie du guide realise est presentee. Deuxiemement (au chapitre 3) une technique de mesure du coefficient Kerr dans un guide plan est presentee. Cette technique consiste a mesurer le changement de transmission au travers d'un cache place a la sortie du guide en fonction de l'intensite crete a l'entree du guide plan. Une methode pour determiner les conditions optimales pour la sensibilite de la mesure est presentee, illustree de plusieurs exemples. Finalement, la realisation d'un oscillateur parametrique optique basee sur un cristal de niobate de lithium a domaines periodiquement inverses est presentee. La theorie des oscillateurs parametriques optiques est exposee avec une emphase sur la generation d'impulsions intenses a des longueurs d'onde autour de 1,5 microns a partir d'un laser Ti:saphir, dans le but d'obtenir une source pour faire les experiences sur l'emission solitonique.

Effet Bauschinger lors de la plasticité cyclique de l'aluminium pur monocristallin

NASA Astrophysics Data System (ADS)

Alhamany, A.; Chicois, J.; Fougères, R.; Hamel, A.

1992-08-01

This paper is concerned with the study of microscopic mechanisms which control the cyclic deformation of pure aluminium and especially with the analysis of the Bauschinger effect which appears in aluminium single crystals deformed by cyclic straining. Fatigue tests are performed on Al single crystals with the crystal axis parallel to [ overline{1}23] at room temperature, at plastic shear strain amplitudes in the range from 10^{-4} to 3× 10^{-3}. Mechanical saturation is not obtained at any strain level. Instead, a hardening-softening-secondary hardening sequence is found. The magnitude of the Bauschinger effect as the difference between yield stresses in traction and in compression, changes all along the fatigue loop and during the fatigue test. The Bauschinger effect disappears at two points of the fatigue loop, one in the traction part, the other in the compression one. At these points, the Bauschinger effect is inverted. Dislocation arrangement evolutions with fatigue conditions can explain the cyclic behaviour of Al single crystals. An heterogeneous dislocation distribution can be observed in the cyclically strained metal : dislocation tangles, long dislocation walls and dislocation cell walls, separated by dislocation poor channels appear in the material as a function of the cycle number. The long range internal stress necessary to ensure the compatibility of deformation between the hard and soft regions controls the observed Bauschinger effect. Ce travail s'inscrit dans le cadre de l'étude des mécanismes microsocopiques intervenant lors de la déformation cyclique de l'aluminium pur et concerne en particulier l'analyse de l'effet Bauschinger apparaissant au cours de la solliciation cyclique des monocristaux. L'étude a été menée à température ambiante sur des monocristaux d'aluminium pur orientés pour un glissement simple (axe [ overline{1}23] ), à des amplitudes de déformation plastique comprise entre 10^{-4} et quelques 10^{-3}. Nous n'avons pas obtenu de véritable saturation mécanique. Nous sommes en présence d'une séquence durcissement-adoucissement-durcissement secondaire. L'amplitude de l'effet Bauschinger considéré comme la différence entre les limites élastiques en traction et en compression mesurées selon une procédure appropriée, évolue le long d'une boucle de fatigue, s'annule pour deux points particuliers l'un en traction l'autre en compression. De part et d'autre de ces points, le signe de l'effet Bauschinger est inversé. Les microstructures des états fatigués sont caractérisés par une répartition hétérogène des dislocations constituée d'amas, de murs ou des parois, suivant le degré de déformation cyclique, séparés par des zones à faible densité de dislocations. Les contraintes internes liées aux incompatibilités de déformation résultant de cette répartition hétérogène des dislocations sont à l'origine de l'effet Bauschinger observé dans les monocristaux. Ces contraintes et l'évolution de la quantité de cellules de dislocations avec la fatigue expliquent le durcissement secondaire.

Deuterium Isotope Effects During HMX Combustion: Chemical Kinetic Burn Rate Control Mechanism Verified

DTIC Science & Technology

1989-01-01

experience de gen dieses Experiments. Der 10 KDIE-Wert legt nahe. dab die combustion statique. La valeur de l’effet isotopique primaire laisse...anomaler combustion globale. Des 6tudes publifes par ailleurs confirment cette KDIE-Wert bei 10,4 MPa wirL angegeben. Diese KDIE-Experimente hypoth~se

Effets pathogènes d'un faible débit de dose : la relation « dose effet »

NASA Astrophysics Data System (ADS)

Masse, Roland

2002-10-01

There is no evidence of pathogenic effects in human groups exposed to less than 100 mSv at low dose-rate. The attributed effects are therefore the result of extrapolations from higher doses. The validity of such extrapolations is discussed from the point of view of epidemiology as well as cellular and molecular biology. The Chernobyl accident resulted in large excess of thyroid cancers in children; it also raised the point that some actual sanitary effects among distressed populations might be a direct consequence of low doses. Studies under the control of UN have not confirmed this point identifying no dose-effect relationship and " severe socio-economic and psychological pressures… poverty, poor diet and living conditions, and lifestyle factors" as the main cause for depressed health. Some hypothesis are considered for explaining the dose-dependence and high prevalence of non-cancer causes of death among human groups exposed to more than 300 mSv. To cite this article: R. Masse, C. R. Physique 3 (2002) 1049-1058.

Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

NASA Astrophysics Data System (ADS)

Fall, H.; Charon, W.; Kouta, R.

2002-12-01

Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

Effets de la pollution de l’air sur la santé

PubMed Central

Abelsohn, Alan; Stieb, Dave M.

2011-01-01

Résumé Objectif Faire connaître aux médecins de famille les effets de la pollution atmosphérique sur la santé et indiquer quels conseils donner aux patients vulnérables pour qu’ils soient moins exposés. Sources de l’information On a consulté MEDLINE à l’aide des termes relatifs à la pollution atmosphérique et à ses effets indésirables. On a révisé les articles en anglais publiés entre janvier 2008 et décembre 2009. La plupart des études contenaient des preuves de niveau II. Principal message Au Canada, la pollution de l’air extérieur cause une morbidité et une mortalité importantes. Elle peut affecter le système respiratoire (exacerbation de l’asthme et de la maladie pulmonaire obstructive chronique) et le système cardiovasculaire (déclencher l’arythmie, l’insuffisance cardiaque et les AVC). La cote air santé (CAS) est un nouvel outil de communication mis au point par Santé Canada et Environnement Canada qui indique sur une échelle de 1 à 10, le risque pour la santé causé par la pollution atmosphérique. La CAS est largement diffusée dans les médias et cet outil pourrait être utile au médecin de famille pour inciter les patients à haut risque (comme ceux qui souffrent d’asthme, de maladie pulmonaire obstructive chronique ou d’insuffisance cardiaque) à réduire leur exposition à la pollution atmosphérique. Conclusion Le médecin de famille peut se servir de la CAS et de ses messages sur la santé pour enseigner aux asthmatiques et aux autres patients à risque élevé la façon de réduire les risques pour la santé causés par la pollution atmosphérique.

Le rôle du soutien parental dans la relation entre la victimisation homophobe, l’homophobie intériorisée et la détresse psychologique chez les jeunes de minorités sexuelles (JMS) : une approche de médiation modérée

PubMed Central

Bergeron, Félix-Antoine; Blais, Martin; Hébert, Martine

2016-01-01

Résumé Cet article explore le rôle modérateur du soutien parental dans les relations entre la victimisation homophobe, l’homophobie intériorisée et la détresse psychologique chez des jeunes de minorités sexuelles (JMS), que l’on dit aussi lesbiennes, gais, bisexuels ou en questionnement. Il vise à 1) documenter la prévalence des différentes formes de victimisation homophobe vécue par les JMS, et ce, selon le genre et l’âge et 2) à explorer l’effet modérateur du soutien parental dans la relation entre la victimisation homophobe, l’homophobie intériorisée et la détresse psychologique. Un échantillon de 228 JMS âgés de 14 à 22 ans, non exclusivement hétérosexuels, recrutés en milieu communautaire dans le cadre de l’enquête sur le Parcours Amoureux des Jeunes (PAJ) du Québec a été analysé. L’impact de la victimisation homophobe, du soutien parental, de l’homophobie intériorisée sur la détresse psychologique est exploré par un modèle de régression linéaire avec effets de médiation modérée. Le rôle modérateur du soutien parental est confirmé dans la relation entre la victimisation homophobe et la détresse psychologique. Ces variables peuvent constituer des leviers pour prévenir les effets négatifs des préjudices homophobes sur la santé mentale des JMS. PMID:26966851

Etude thermo-hydraulique de l'ecoulement du moderateur dans le reacteur CANDU-6

NASA Astrophysics Data System (ADS)

Mehdi Zadeh, Foad

Etant donne la taille (6,0 m x 7,6 m) ainsi que le domaine multiplement connexe qui caracterisent la cuve des reacteurs CANDU-6 (380 canaux dans la cuve), la physique qui gouverne le comportement du fluide moderateur est encore mal connue de nos jours. L'echantillonnage de donnees dans un reacteur en fonction necessite d'apporter des changements a la configuration de la cuve du reacteur afin d'y inserer des sondes. De plus, la presence d'une zone intense de radiations empeche l'utilisation des capteurs courants d'echantillonnage. En consequence, l'ecoulement du moderateur doit necessairement etre etudie a l'aide d'un modele experimental ou d'un modele numerique. Pour ce qui est du modele experimental, la fabrication et la mise en fonction de telles installations coutent tres cher. De plus, les parametres de la mise a l'echelle du systeme pour fabriquer un modele experimental a l'echelle reduite sont en contradiction. En consequence, la modelisation numerique reste une alternative importante. Actuellement, l'industrie nucleaire utilise une approche numerique, dite de milieu poreux, qui approxime le domaine par un milieu continu ou le reseau des tubes est remplace par des resistances hydrauliques distribuees. Ce modele est capable de decrire les phenomenes macroscopiques de l'ecoulement, mais ne tient pas compte des effets locaux ayant un impact sur l'ecoulement global, tel que les distributions de temperatures et de vitesses a proximite des tubes ainsi que des instabilites hydrodynamiques. Dans le contexte de la surete nucleaire, on s'interesse aux effets locaux autour des tubes de calandre. En effet, des simulations faites par cette approche predisent que l'ecoulement peut prendre plusieurs configurations hydrodynamiques dont, pour certaines, l'ecoulement montre un comportement asymetrique au sein de la cuve. Ceci peut provoquer une ebullition du moderateur sur la paroi des canaux. Dans de telles conditions, le coefficient de reactivite peut varier de maniere importante, se traduisant par l'accroissement de la puissance du reacteur. Ceci peut avoir des consequences majeures pour la surete nucleaire. Une modelisation CFD (Computational Fluid Dynamics) detaillee tenant compte des effets locaux s'avere donc necessaire. Le but de ce travail de recherche est de modeliser le comportement complexe de l'ecoulement du moderateur au sein de la cuve d'un reacteur nucleaire CANDU-6, notamment a proximite des tubes de calandre. Ces simulations servent a identifier les configurations possibles de l'ecoulement dans la calandre. Cette etude consiste ainsi a formuler des bases theoriques a l'origine des instabilites macroscopiques du moderateur, c.-a-d. des mouvements asymetriques qui peuvent provoquer l'ebullition du moderateur. Le defi du projet est de determiner l'impact de ces configurations de l'ecoulement sur la reactivite du reacteur CANDU-6.

Proprietes ionochromes et photochromes de derives du polythiophene

NASA Astrophysics Data System (ADS)

Levesque, Isabelle

La synthese et la caracterisation de derives regioreguliers du polythiophene ont ete effectuees en solution et sur des films minces. La spectroscopie UV-visible de ces derives a permis de constater qu'ils peuvent posseder des proprietes chromiques particulieres selon le stimulus auquel ils sont soumis. Par exemple, une augmentation de la temperature permet en effet aux polymeres de passer d'une couleur violette a jaune, et ce, a l'etat solide aussi bien qu'en solution. Ces proprietes chromiques semblent regies par une transition conformationnelle (plane a non-plane) de la chaine principale. Ce travail avait pour but de mieux comprendre l'influence de l'organisation des chaines laterales sur les transitions chromiques. Deux derives synthetises possedant des chaines laterales sensibles aux cations alcalins se sont averes etre ionochromes en plus d'etre thermochromes. Il s'agit d'un polymere comportant des chaines laterales de type oligo(oxyethylene) et d'un autre comportant un groupement ether couronne specifique aux ions lithium. Les effets chromiques observes sont expliques par des interactions non-covalentes des cations avec les atomes d'oxygene des chaines laterales dans le cas du premier polymere, et par l'insertion de l'ion Li + dans la cavite de l'ether couronne dans le cas du second polymere. Ces interactions semblent provoquer une diminution de l'organisation induisant ainsi une torsion de la chaine principale. Les deux polymeres semblent specifiques a certains cations et pourraient donc servir comme detecteurs optiques. La specificite aux ions Li+ du second polymere pourrait aussi permettre la conduction ionique, en plus de la conductivite electronique caracteristique des polythiophenes, ce qui pourrait s'averer utile dans le cas de batteries legeres entierement faites de polymeres et de sels de lithium. D'autres derives comportant des chaines laterales de type azobenzene se sont averes etre photochromes en plus d'etre thermochromes. Le groupement lateral a la possibilite de changer de configuration de la forme trans a la forme cis lorsqu'il est soumis a une irradiation dans le domaine de l'ultraviolet ce qui provoque, selon toute evidence, un effet marque sur l'organisation des chaines laterales. Cela induit alors une torsion de la chaine principale thiophene entrainant une diminution de conjugaison marquee. Ces effets peuvent etre exploites entre autres dans l'ecriture optique. Il s'est avere que le polymere irradie peu conjugue peut etre force a retourner a son etat initial conjugue tres rapidement par un traitement electrochimique simple. En conclusion, on a pu prouver qu'une modification dans l'organisation des chaines laterales par un stimulus exterieur affecte considerablement la conformation de la chaine principale. Cela porte a croire que les chaines laterales stabilisent une conformation particuliere des polythiophenes.

Modality effect in false recognition: evidence from Chinese characters.

PubMed

Mao, Wei Bin; Yang, Zhi Liang; Wang, Lin Song

2010-02-01

Using the Deese/Roediger-McDermott (DRM) false memory method, Smith and Hunt ( 1998 ) first reported the modality effect on false memory and showed that false recall from DRM lists was lower following visual study than following auditory study, which led to numerous studies on the mechanism of modality effect on false memory and provided many competing explanations. In the present experiment, the authors tested the modality effect in false recognition by using a blocked presentation condition and a random presentation condition. The present experiment found a modality effect different from the results of the previous research; namely, false recognition was shown to be greater following visual study than following auditory study, especially in the blocked presentation condition rather than in the random presentation condition. The authors argued that this reversed modality effect may be due to different encoding and processing characteristics between Chinese characters and English words. Compared with English words, visual graphemes of critical lures in Chinese lists are likely to be activated and encoded in participants' minds, thus it is more difficult for participants to discriminate later inner graphemes from those items presented in visual modality. Hence visual presentation could lead to more false recognition than auditory presentation in Chinese lists. The results in the present experiment demonstrated that semantic activation occurring during the encoding and retrieve phases played an important role in modality effect in false recognition, and our findings might be explained by the activation-monitoring account. Utilisant la méthode de fausse mémoire de Deese/Roediger-McDermott (DRM), Smith et Hunt ( 1998 ) ont d'abord rendu compte de l'effet de modalité sur la fausse mémoire et ils ont montré que le faux rappel à partir des listes de DRM était plus faible suivant une étude visuelle plutôt qu'une étude auditive. Ceci a mené à plusieurs études sur le mécanisme de l'effet de modalité sur la fausse mémoire, lesquelles ont fourni plusieurs explications concurrentes. Dans la présente expérience, les auteurs ont testé l'effet de modalité dans la fausse reconnaissance en utilisant une condition de présentation fixe et une condition de présentation aléatoire. Cette expérience a révélé un effet de modalité différent des résultats obtenus dans les recherches antérieures. En effet, la fausse reconnaissance était plus élevée suivant une étude visuelle plutôt qu'une étude auditive, spécialement dans la condition de présentation fixe. Les auteurs suggèrent que cet effet de modalité inverse peut être dû à des caractéristiques d'encodage et de processus différentes entre les caractères chinois et les mots anglais. Comparativement aux mots anglais, les graphèmes visuels des leurres critiques dans les listes chinoises sont susceptibles d'être activés et encodés dans l'esprit des participants, rendant plus difficile de discriminer les graphèmes intériorisés plus tard de ces items présentés dans la modalité visuelle. Ainsi, la présentation visuelle pourrait mener à davantage de fausse reconnaissance que la présentation auditive dans les listes chinoises. Les résultats de la présente expérience ont démontré que l'activation sémantique se produisait durant l'encodage et que la phase de retrait jouait un rôle important dans l'effet de modalité dans la fausse reconnaissance. Nos résultats peuvent être expliqués par la théorie activation-contrôle. Utilizando el método de Deese/Roediger-McDermott (DRM) de falsa mamoria, Smith y Hunt ( 1998 ) fueron los primeros en encontrar el efecto de modalidad en la falsa memoria y demostraron que los falsos recuerdos del listado DRM fueron más bajos después de un estudio visual que después de un estudio auditivo lo cual llevó a varios estudios sobre el mecanismo del efecto de la modalidad sobre falsos recuerdos y proporcionó varias explicaciones que compiten entre sí. En el presente trabajo, los autores estudiaron el efecto de la modalidad en el falso reconocimiento utilizando una condición de presentación en bloques y otra condición de presentación de forma aleatoria. El presente experimento encontró un efecto de la modalidad diferente de los resultados de los estudios anteriores. En concreto, el reconocimiento falso ha resultado ser mayor después del estudio visual que después del estudio auditivo, especialmente en caso de la presentación en bloques en comparación con la condición de presentación aleatoria. Los autores argumentan que este efecto inverso de la modalidad puede ser causado por diferentes características de codificación y procesamiento entre caracteres chinos y palabras inglesas. En comparación con las palabras inglesas, los grafemas visuales de las palabras críticas en chino tienen probabilidad de ser activadas y codificadas en las mentes de los participantes, por tanto, es más difícil discriminar posteriores grafemas internos de los que fueron presentados en la modalidad visual. Por tanto, la presentación visual podría conducir a más falsos reconocimientos que la presentación auditiva en los listados de palabras chinas. Los resultados del presente experimento demostraron que la activación semántica durante las fases de codificación y recuperación jugó un rol importante en el efecto de falso reconocimiento según modalidad y que nuestros resultados se pueden explicar teniendo en cuenta la activación y la vigilancia.

Taking Up Space: Museum Exploration in the Twenty-First Century

ERIC Educational Resources Information Center

Sutton, Tiffany

2007-01-01

Museums have become a crucible for questions of the role that traditional art and art history should play in contemporary art. Friedrich Nietzsche argued in the nineteenth century that museums can be no more than mausoleums for effete (fine) art. Over the course of the twentieth century, however, curators dispelled such blanket pessimism by…

Issues and Prospects of Effetive Implementation of New Secondary School Curriculum in Nigeria

ERIC Educational Resources Information Center

Ahmadi, Ali A.; Lukman, Ajibola A.

2015-01-01

This paper digs into the issues surrounding effective implementation of new secondary school curriculum in Nigeria. This is based on the feeling that 21st century education is characterized with a dramatic technological revolution. The paper therefore portrays education in the 21st century as a total departure from the factory-model education of…

Optics of a Double Focussing Magnetic Sector by Fringe Effect; OPTIQUE D'UN SECTEUR MAGNETIQUE A DOUBLE FOCALISATION PAR EFFET DE FRANCES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krafft, J.

1960-01-01

A general study is made of the optical elements of a double-fccusing magnetic sector by the fringe effect, with a view to its application to the monochromation of the proton, deuteron, or triton beam of the 1.4 Mev accelerator. (auth)

Investigations into the Power MOSFET SEGR Phenomenon and its Physical Mechanism

NASA Technical Reports Server (NTRS)

Swift, G. M.; Edmonds, L. E.; Miyahira, T.; Nichols, D. K.; Johnston, A. H.

1997-01-01

The state of understanding of the destructive SEGR event in power MOSFETs is relatively mature with large published efforts, both experimental and theoretical. However, gasps remain in the uderstanding of the phenomenon, including unexplained anomalies, emperical-only dependencies on some important device and incident ion physical parameters, and limited insight into latent effets.

The Cultivation of Ivy. A Saga of the College in America.

ERIC Educational Resources Information Center

Thelin, John R

The popular image of the Ivy League is one of a slightly awesome bastion of the well-born, well-bred, and soon-to-be-powerful or, less charitably, a haven for "the effete, unAmerican, and hopelessly bookish." This pervasive idea of collegiate personality is analyzed, tracing the evolution of the Ivy League from an incongruous array of…

Symetrie en energie des spectres de l'onde de densite de charge dans le 2-hydrogene seleniure de niobium

NASA Astrophysics Data System (ADS)

Behmand, Behnaz

Les mecanismes qui menent a la supraconductivite dans les supraconducteurs a haute temperature critique sont encore aujourd'hui mal compris contrairement a ceux dans les supraconducteurs conventionnels. Dans les hauts-Tc, certaines modulations de la densite d'etats electroniques coexistant avec la phase supraconductrice ont ete observees, ce qui engendre des questionnements sur leur role dans la supraconductivite. En fait, plusieurs types de modulation de la densite d'etats electroniques existent, comme par exemple l'onde de densite de charge et l'onde de densite de paires. Ces deux modulations, d'origines differentes et mesurables avec la technique de spectroscopie par effet tunnel, peuvent etre differenciees avec une etude de leur symetrie. Ce memoire consistera donc a presenter l'etude de la symetrie de l'onde de densite de charge dans le 2H-NbSe2 qui est presente dans la phase supraconductrice a 300 mK. Par contre, certaines difficultes liees au principe de mesure, soit l'effet de normalisation, nuisent a l'identification de cette symetrie. La methode, pour contourner ce probleme sera alors l'element clef de ce travail.

Accident D’Electrisation et Hemorragie Cerebro-Meningee : A Propos D’une Observation

PubMed Central

Chaibdraa, A.; Medjellakh, M.S.; Saouli, A.; Bentakouk, M.C.

2008-01-01

Summary L'électrisation est un évènement accidentel qui diffère des autres pathologies occasionnant des brûlures graves, à cause de ses spécificités qui traduisent d'une part la destruction du revêtement cutané, mais également les effets directs ou indirects du courant électrique sur tout tissu de l'organisme rencontré lors de son passage, en particulier le tissu nerveux. Les manifestations neurologiques centrales sont nombreuses, en relation avec les effets de l'électricité sur le parenchyme cérébral ou une lésion associée à l'électrisation. Nous rapportons l'observation d'une hémorragie cérébro-meningée survenant au 3ème jour d'une électrisation grave. Cette complication est bien documentée dans la littérature traitant des accidents d'électrisation post-foudroiement. N'ayant pas rencontré de cas similaire publié lors des accidents dus au courant industriel, nous présentons cette observation, qui soulève le problème du mécanisme physiopathologique de survenue, difficile à trancher. PMID:21991125

Nouvelles approches en theorie du champ moyen dynamique: le cas du pouvoir thermoelectrique et celui de l'effet orbital d'un champ magnetique

NASA Astrophysics Data System (ADS)

Arsenault, Louis-Francois

Les applications reliees a la generation d'energie motivent la recherche de materiaux ayant un fort pouvoir thermoelectrique (S). De plus, S nous renseigne sur certaines proprietes fondamentales des materiaux, comme, par exemple, la transition entre l'etat coherent et incoherent des quasi-particules lorsque la temperature augmente. Empiriquement, la presence de fortes interactions electron-electron peut mener a un pouvoir thermoelectrique geant. Nous avons donc etudie le modele le plus simple qui tient compte de ces fortes interactions, le modele de Hubbard. La theorie du champ moyen dynamique (DMFT) est tout indiquee dans ce cas. Nous nous sommes concentres sur un systeme tridimensionnel (3d) cubique a face centree (fcc), et ce, pour plusieurs raisons. A) Ce type de cristal est tres commun dans la nature. B) La DMFT donne de tres bons resultats en 3d et donc ce choix sert aussi de preuve de principe de la methode. C) Finalement, a cause de la frustration electronique intrinseque au fcc, celui-ci ne presente pas de symetrie particule-trou, ce qui est tres favorable a l'apparition d'une grande valeur de S. Ce travail demontre que lorsque le materiau est un isolant a demi-remplissage a cause des fortes interactions (isolant de Mott), il est possible d'obtenir de grands pouvoirs thermoelectriques en le dopant legerement. C'est un resultat pratique important. Du point de vue methodologique, nous avons montre comment la limite de frequence infinie de S et l'approche dite de Kelvin, qui considere la limite de frequence nulle avant la limite thermodynamique pour S, donnent des estimations fiables de la vraie limite continue (DC) dans les domaines de temperature appropriee. Ces deux approches facilitent grandement les calculs en court-circuit ant la necessite de recourir a de problematiques prolongements analytiques. Nous avons trouve que la methode de calcul a frequence infinie fonctionne bien lorsque les echelles d'energie sont relativement faibles. En d'autres termes, cette approche donne une bonne representation de S lorsque le systeme devient coherent. Les calculs montrent aussi que la formule Kelvin est precise lorsque la fonction spectrale des electrons devient incoherente, soit a plus haute temperature. Dans la limite Kelvin, S est essentiellement l'entropie par particule, tel que propose il y a longtemps. Nos resultats demontrent ainsi que la vision purement entropique de S est la bonne dans le regime incoherent, alors que dans le regime coherent, l'approche a frequence infinie est meilleure. Nous avons utilise une methode a la fine pointe, soit le Monte-Carlo quantique en temps continu pour resoudre la DMFT. Pour permettre une exploration rapide du diagramme de phase, nous avons du developper une nouvelle version de la methode des perturbations iterees pour qu'elle soit applicable aussi a forte interaction au-dela de la valeur critique de la transition de Mott. Un autre sujet a aussi ete aborde. L'effet orbital du champ magnetique dans les systemes electroniques fortement correles est une question tres importante et peu developpee. Cela est d'autant plus essentiel depuis la decouverte des oscillations quantiques dans les supraconducteurs a haute temperature (haut- Tc). Par desir de developper une methode la moins biaisee possible, nous avons derive la DMFT lorsqu'un champ se couplant a l'operateur energie cinetique par la substitution de Peierls est present. Ce type d'approche est necessaire pour comprendre entre autres l'effet de la physique de Mott sur des phenomenes tels que les oscillations quantiques. Nous avons obtenu un resultat tres important en demontrant rigoureusement que la relation d'auto-coherence de la DMFT et le systeme intermediaire d'impurete quantique restent les memes. L'effet du champ peut etre contenu dans la fonction de Green locale, ce qui constitue la grande difference avec le cas habituel. Ceci permet de continuer a utiliser les solutionneurs d'impuretes standards, qui sont de plus en plus puissants. Nous avons aussi developpe la methode pour le cas d'un empilement de plans bidimensionnels selon z, ce qui permet d'etudier l'effet orbital du champ dans des nanostructures et meme dans les materiaux massifs, si le nombre de plans est suffisant pour obtenir la limite tridimensionnelle. Mots cles : Pouvoir thermoelectrique, Theorie du Champ Moyen Dynamique, Modele de Hubbard, Effet orbital du champ magnetique, Electrons fortement correles, Materiaux quantiques, Theorie des perturbations iterees

Fibrillation auriculaire et activité physique

PubMed Central

Bosomworth, N. John

2015-01-01

Résumé Objectif Examiner les données probantes portant sur les effets de divers niveaux d’activité physique sur l’incidence de fibrillation auriculaire (FA) dans la population générale et chez les athlètes d’endurance. Sources des données Une recherche a initialement été menée sur PubMed à l’aide des titres MeSH ou des mots-de-texte anglais (avec descripteur de zone de recherche TIAB [title and abstract]) atrial fibrillation et exercise ou physical activity ou athlet* ou sport*, sans filtre additionnel. Le système GRADE (grading of recommendations, assessment, development, and evaluation) a été utilisé pour tirer les conclusions au sujet de la qualité et du niveau de preuve. Sélection des études Aucune étude d’intervention n’est ressortie de la recherche. Les études d’observation ont alors été jugées acceptables et, bien que des études prospectives de cohortes à long terme de plus grande envergure auraient été préférables, des essais cas-témoins ou transversaux ont aussi été inclus dans cette révision. Synthèse Les données disponibles laissent croire à un lien proportionnel à la dose entre l’exercice plus intense et l’incidence réduite de FA chez les femmes. Il en va de même pour les hommes dont le niveau d’activité physique est de faible à modéré. Chez les hommes seulement, l’activité intense est associée à un risque accru de FA et ce, dans la plupart des études, mais pas la totalité d’entre elles. Ce risque est modéré, le rapport de risque instantané étant de 1,29 dans l’une des études de meilleure qualité. Le risque de FA chez la plupart des personnes régulièrement actives est plus faible que le risque observé dans la population sédentaire appariée. Conclusion La fibrillation auriculaire est probablement moins fréquente à mesure que le niveau d’activité physique augmente, la relation dose-réponse étant démontrable. À toutes les intensités, l’exercice doit être encouragé pour ses effets sur le bien-être physique et la réduction de la mortalité. Chez les hommes qui pratiquent des activités vigoureuses, les effets bénéfiques sur la FA pourraient disparaître et le risque pourrait surpasser celui observé dans la population sédentaire; cependant les données probantes à cet effet ne sont ni robustes ni constantes. Ces hommes devraient être mis au courant de cette hausse modeste du risque s’ils choisissent de poursuivre leurs activités physiques vigoureuses.

Evaluation de L’Effet du Vieillissement des Equipages sur les Consequences du Decalage Horaire (Evaluation of Crew Members Aging on Jet-Lag Consequences)

DTIC Science & Technology

2000-08-01

Ergonomia , 1987, 30, 13 79- physique que psychologique. Cela tend A damontrer que 1393. dans des conditions militaires op~rationnelles, les 2...melatonin. Ergonomia , 1987, 30, 1379- 1393. 2 - BLOIS R, FEINBERG I., GAILLARD J.M., KUPFER D.J. and WEBB W.B. Sleep in normal and pathological aging

Electromagnetic Noise Interference and Compatibility

DTIC Science & Technology

1975-11-01

RADIO INTERFERENCE by C.Fengler 7 LES CHARGES ELECTROSTATIQUES ET LES PERTURBATIONS QU’ELLES ENTRAINENT DANS LES LIAISONS RADIOELECTRIQUES par...PAR LA TRANSMISSION DANS UN SYSTFJE INTEGRE AEROPORTE par r,.David et M.Vanneizel 31 Not available at time of priating Reference DIGITAL DATA...TRANSMISSION IN AIRCRAFT: EMC-PROBLEMS AND POSSIBLE SOLUTIONS by R.Rode 32 GENERATIONS El EFFETS DES TENSIONS PARASITES DE CONDUCTION ET DE RAVONNEMENT ENTRE

Impuretés et systèmes corrélés. Des chaînes aux cuprates supraconducteurs

NASA Astrophysics Data System (ADS)

Bobroff, J.

2005-01-01

Impurities and correlated systems Discovery of high TC superconductors has opened the new field of strongly correlated fermions physics. In these compounds, mostly transition metal oxides, strong correlations between electrons affect sharply their electronic properties. In order to determine accurately these correlations and their possible link with superconductivity, we study the effect of local defects such as non magnetic impurities. In fact, in the more simple case of insulating spin chains and ladders, these impurities induce a staggered magnetism in their neighborhood which reveals the underlying electronic correlations. Similar effects are observed in high TC superconductors, using local probes such as nuclear magnetic resonance. These observations allow to get a better understanding of both normal and superconducting state of these oxides, both full of surprises. La découverte des supraconducteurs à haute température critique a ouvert la voie à une nouvelle physique, celle des fermions fortement corrélés. Dans ces systèmes, le plus souvent des oxydes de métaux de transition, les fortes corrélations entre électrons affectent profondément leurs propriétés électroniques et induisent de nouveaux états originaux : liquides de spins, supraconductivité, etc. Pour mesurer ces corrélations et ainsi déterminer leur lien éventuel avec la supraconductivité, nous proposons d'étudier l'effet de défauts ponctuels tels que des impuretés non magnétiques. En effet, dans le cas plus simple de chaînes ou d'échelles de spin isolantes, ces impuretés induisent dans leur voisinage immédiat un magnétisme alterné révélateur des corrélations électroniques. Des effets semblables sont observés dans les supraconducteurs à haute température critique, grâce à des sondes locales comme la résonance magnétique nucléaire. Ces observations permettent de mieux comprendre à la fois l'état normal et supraconducteur de ces oxydes, tous deux riches en surprises.

Les hémodialysés HVC sont-ils vraiment des patients difficiles à traiter?

PubMed Central

Krati, Khadija; Cherquaoui, Hind; Oubaha, Sofia; Samlani, Zouhour

2015-01-01

L'hépatite C demeure la principale infection virale chez l'hémodialysé, dont la prise en charge thérapeutique ainsi que la gestion de ses effets secondaires restent difficiles. Il s'agit d'une étude rétrospective portant sur tous les patients atteints d'hépatite C chronique ayant une insuffisance rénale chronique sous hémodialyse, suivis au service de gastroentérologie au CHU Mohamed VI de Marrakech sur une période de Janvier 2004 à Décembre 2014. Sur un total de 355 cas d'hépatite virale C, 13 patients étaient hémodialysés (3,66%). Dix patients ont été traités, soit 76,94% des cas. Le traitement n’était pas indiqué chez 2 patients ayant une fibrose minime sans cytolyse. Il était contre-indiqué chez une patiente multitarée. Deux malades ont eu une réponse virologique rapide et 5 une réponse virologique précoce. Le taux de réponse virologique soutenue était de 40%, 30% des patients étaient non répondeurs. Le traitement fut arrêté chez 2 patientes pour effets secondaires sévères. Un seul patient a été candidat à une transplantation rénale. En analyse multivariée, la réponse virologique soutenue a été significativement associée à certains facteurs prédictifs de bonne réponse thérapeutique: Age jeune ≤40 ans (P=0,0057), fibrose minime F1-F2 (P=0,03), génotype non 1 (P=0,0064), charge virale préthérapeutique <800000 UI/ml (P=0,013), et l'absence d'arrêt thérapeutique (P=0,028). La gestion efficace des effets secondaires du traitement de HVC permet d'obtenir chez l'hémodialysé un taux de réponse virologique soutenue avoisinant celui de la population générale. PMID:27022433

Durcissement superficiel de la fonte grise Ft25 induit par un traitement de surface dans le moule

NASA Astrophysics Data System (ADS)

Bouitna, Mohamed; Boutarek-Zaourar, Naïma; Mansour, Samir; Chentouf, Samir Mourad; Mossang, Eric

2018-02-01

L'objectif de cette étude est la consolidation en surface de la fonte grise lamellaire Ft25 par un dépôt riche en manganèse en développant une méthode combinant en une seule opération l'élaboration et le traitement de surface dans le moule. Les effets de la granulométrie du ferro-manganèse (80 % Mn + 20 % Fe), ainsi que l'épaisseur des pièces en fontes sur les couches formées ont été étudiés. On a retenu trois granulométries du ferro-manganèse de 0,18 mm, 0,25 mm et 0,5 mm pour le traitement des pièces en fontes présentant des épaisseurs de 25 mm, 100 mm et 200 mm. Parmi les résultats obtenus, on distingue une consolidation des propriétés en surface induite par la formation d'une couche riche en manganèse continue et homogène. L'effet de la granulométrie du ferro-manganèse sur l'épaisseur de la couche traitée a été mis en évidence. La variation de l'épaisseur des couches formées diminue avec l'augmentation de la granulométrie du ferro-manganèse. Pour une pièce de 100 mm d'épaisseur, la couche formée est estimée à 350 μm pour une granulométrie de 0,18 alors qu'elle n'est que de 180 μm pour une granulométrie de 0,5. L'effet de l'épaisseur de la pièce n'est en revanche pas assez prononcé sur la taille des couches formées. Une amélioration nette de la résistance, à l'usure de la fonte traitée en relation avec les transformations en surface, a été mise en évidence.

Les neuropathies liées au VIH/SIDA: une étude clinique chez les patients infectés par le VIH au Centre d'Excellence VIH/SIDA de l'Université de Lubumbashi

PubMed Central

Kabongo, Joe Katabwa; Kaputu-Kalala-Malu, Célestin; Luboya, Oscar; Mutombo, Valerien; Ntambwe, Abel; Mapatano, Mala Ali; Mukendi, Kavulu Mayamba

2015-01-01

Introduction En vue d'améliorer la prise en charge des patients souffrant de neuropathie (NP) associées à l'infection HIV, nous avons essayé de déterminer le profil clinique des personnes souffrant de NP au cours du suivi thérapeutique de leur infection HIV. Méthodes Il s'agit d'une étude transversale (n= 101) menée au centre d'excellence depuis 1 an. Notre analyse est essentiellement clinique. Par un examen clinique minutieux, nous avons recherché tous les symptômes et signes cliniques des NP. Subjectivement, les douleurs dominent le tableau. Pour affiner leur diagnostic, nous avons utilisé l’échelle DN4 (Diagnostic des douleurs neuropathiques) et l’échelle EVA (Evaluation de la gravité des douleurs). Nous avons ensuite analysé nos données en fonction de certains autres facteurs épidémiologiques tels que le taux des CD4, le traitement anti-HIV etc. Résultats Les 101 patients représentent 3,12% de la cohorte générale; 53,3% des patients présentent une abolition des réflexes ostéotendineux des membres inférieurs; 77,89% présentent une hypoesthésie thermo algique en chaussette et en gants; 25% ont présenté une amyotrophie des membres inférieurs; 76,5% ont été soumis à un traitement antirétroviral contenant la stavudine; 11,7% ont pris la didanosine (DDI) et Abacavir (ABC). 84% ont une moyenne de CD4 de 292 cel/mm3. Conclusion La NP altère la qualité de vie de nos patients et diminue l'adhérence au traitement antirétroviral. Plusieurs facteurs sont incriminés dans la survenue de la NP, l'effet direct des antirétroviraux, l'effet inflammatoire dysimmunitaire, l'effet infectieux lié aux infections opportunistes. D'autres facteurs seront recherchés et analysés ultérieurement. PMID:26185582

NATO Human Resources (Manpower) Management (Gestion des ressources humaines (effectifs) de l’OTAN)

DTIC Science & Technology

2012-02-01

performances , la gestion des récompenses et du salaire, et la motivation du personnel. En conséquence, il faut que la gestion des ressources humaines...importance au fil du temps. Les ressources humaines, chargées à l’origine de l’embauche, du licenciement, de la paie et de la gestion des ...les effets des systèmes d’évaluation des performances ;

Afterrise: Deep Body Temperature Following Exercise

DTIC Science & Technology

1992-03-01

Egalement, les effets de la posture et des v~tements durant la recuperation et la temperature de la salle de recuperation furent examines. Cinq hommes se...chemise a manches courtes). Les temperatures rectales et de la peau furent mesurees A chaque minute durant les exercices et la r~cup~ration affectaient...overgarment. RESUME Cette etude fut entreprise pour documenter l’augmentation continue de la temperature rectale apres exercice dans la chaleur

Impact of Technologies on Learning in the Workplace. Final Report = L'effet des technologies d'apprentissage sur l'apprentissage a vie en milieu de travail.

ERIC Educational Resources Information Center

Dugas, Tim; Green, Lyndsay; Leckie, Norm

The use of learning technologies in the workplace and their impact on lifelong learning were examined. Data were collected from three sources: the literature on learning technologies and labor market trends affecting the adoption, implementation, and success of learning technologies in the workplace; case studies of 8 Canadian firms with 100 or…

Prevention des Toxicomanies Aupres des Filles avec des Problemes de Comportement: Effets a Court Terme (Prevention of Drug Addiction in Girls with Behavior Problems: Short-Term Effects).

ERIC Educational Resources Information Center

Vitaro, Frank; And Others

1992-01-01

This article, written in French, describes and evaluates the first phase of a program to prevent drug addiction among 110 fifth-grade girls with behavior problems in Montreal (Quebec, Canada). Evaluation of the instructional program showed positive results for student knowledge level, attitudes, and behaviors and supported program continuation…

Possibilité d'une nouvelle technologie de traitement des minerais de fer de l'Ouenza par radiométrie

NASA Astrophysics Data System (ADS)

Idres, A.; Bounouala, M.

2005-05-01

En l'absence d'une technologie fiable de traitement des haldes de minerais de fer, les caractéristiques minéralogiques et chimiques complexes et les effets néfastes des résidus miniers posent réellement un problème environnemental. A cet effet, une étude minéralogique et chimique du minerai de fer a été menée en utilisant des techniques multiples (microscopie optique, DRX, FX, MEB). En tenant compte de la nature des résidus, des échantillons représentatifs ont été testés par séparation radiométrique. Plusieurs paramètres ont été caractérisés tels que la vitesse de la bande transporteuse, le temps d'émission des rayons gamma et la granulométrie d'alimentation du procédé. Les résultats ainsi obtenus par cette méthode de séparation sont très significatifs en récupération et en teneur fer. Cependant, cette nouvelle technologie permet d'une part une meilleure valorisation des minerais de fer et d'autre part une réduction du tonnage stocké sur le carreau de la mine.

Effets tardifs d'une irradiation corporelle totale sur le métabolisme intraneuronal de la dopamine et de la sérotonine

NASA Astrophysics Data System (ADS)

Joubert, C.; Jacquet, N.; Lambert, F.; Martin, S.; Martin, C.

1998-04-01

Whole-body irradiation leads to delayed cognitive dysfunction which could result from perturbations of neurotransmission, specially the dopaminergic and the serotoninergic one. The aim of this study was to determine the concentrations of dopamine (DA), serotonin (5-HT) and their metabolites in three cerebral areas of rats, one month after (neutron-gamma) irradiation at 3.38Gy. An increase of DA, 5-HT, and their catabolites was observed. These effects are weak but observed in older rats. Au cours des mois suivant une irradiation corporell totale peuvent se manifester des troubles comportementaux qui pourraient être la conséquence d'altérations de la neuraotransmission, plus particulièrement de la transmission dopaminergique ou sérotoninergique. Nous avons recherché les variations des taux de dopamine (DA), de sérotonine (5-HT) et de leurs métabolites dans 3structures cérébrales 1 mois après une irradiation (neutron-gamma) à la dose de 3,38Gy. Les résultats préliminaires mettent en évidence une augmentation des taux de DA, de 5-HT et de leurs catabolites ; ces effets sont plus discrets mais similaires à ceux observés chez des animaux plus âgés.

Effet d'un champ magnétique uniforme sur les instabilités de Rayleigh-Bénard avec effet Soret

NASA Astrophysics Data System (ADS)

Ben Sassi, Mokhtar; Kaddeche, Slim; Abdennadher, Ali; Henry, Daniel; Hadid, Hamda Ben; Mojtabi, Abdelkader

2016-01-01

The effect of both magnitude and orientation of a uniform magnetic field on the critical transition occurring within an electrically conducting binary fluid layer, stratified in temperature and concentration, taking into account the Soret effect, is investigated numerically. For such a configuration, the results show that the critical thresholds corresponding to an arbitrary orientated magnetic field can be derived from those obtained for a vertical magnetic field and that the axes of the marginal cells are aligned with the horizontal component of the magnetic field. Moreover, an analytical study is conducted to investigate the impact of the magnetic field on long-wavelength instabilities. The effect of the magnetic field on such instabilities reveals a new phenomenon consisting in major changes of the unstable modes that lose their unicellular nature to regain their multi-roll characteristic, as it is the case without magnetic field for ψ <ψℓ0 = 131 Le / (34 - 131 Le). For a binary fluid characterized by a Lewis number Le and a separation factor ψ >ψℓ0, the value of the Hartmann number Haℓ (ψ , Le) corresponding to that transition responsible for a significant change in mass and heat transfer can be determined from the analytical relations derived in this work.

Analysis of electrical property changes of skin by oil-in-water emulsion components

PubMed Central

Jeong, CB; Han, JY; Cho, JC; Suh, KD; Nam, GW

2013-01-01

Synopsis ObjectivesAs the ‘Dry Skin Cycle’ produces continuous deterioration, cosmetic xerosis (flaky, dry skin) is one of the major concerns to most consumers. The purpose of this study was to investigate the moisturizing effect of oil-in-water (O/W) emulsion components. There are numerous types of oils, waxes, polyols and surfactants used as ingredients in skincare products. However, the moisturizing effect of each ingredient and understanding each use to make an effective moisturizing products are still not well understood. Methods To provide answers to these questions, we investigated the moisturizing effect of widely used 41 components (four different classes) in a simple O/W emulsion using capacitance methods. 106 different single oils, and combinations of oil with oil, wax, humectants, and surfactant were formulated and tested. Results In this study, we found that most of the O/W emulsion components had hydration effects on the skin. (i) The average relative water content increase (RWCI) rate of a single oil-based emulsion was 11.8 ± 5.2% (SE) and 7.9 ± 6.0% (SE) at 3 and 6 h, respectively. (ii) An oil combination emulsion showed an average RWCI rate similar to that of a single oil-based emulsion, 12.6 ± 6.0% (SE) and 12.1 ± 6.4% (SE) at 3 and 6 h, respectively (iii) A combination of waxes with oil showed an average RWCI rate of 16 ± 5.6% (SE) and 12.4 ± 4.5% (SE) at 3 and 6 h, respectively. (iv) Humectant combinations showed the highest average RWCI rate 28 ± 7.3% (SE) and 22.2 ± 7.5% (SE) at 3 and 6 h, respectively (v) Surfactant combinations had an average RWCI of 10.8 ± 4.5% (SE) and 6.0 ± 4.0% (SE) at 3 and 6 h, respectively. Conclusion Interestingly, it was difficult to find moisturizing power differences among samples in the same group. Only the humectants group showed significant differences among samples. Glycerine and urea showed significant skin hydration effects compared with other humectants. We also found a significant moisturizing effect by analysing the chemical functional groups; amide class had a higher hydration effect than betaines and disaccharides in humectants combination. Résumé Objectif Puisque le «cycle de la peau sèche” produit une détérioration continue, la xérose cosmétique (squameuse, peau sèche) est l’une des préoccupations majeures pour la plupart des consommateurs. Le but de cette étude était d’étudier l’effet hydratant des composants d’émulsions H / E. Il existe de nombreux types d’huiles, des cires, de polyols, et des tensioactifs utilisés comme ingrédients dans les produits de soins de la peau. Cependant, l’effet hydratant de chaque ingrédient et de leur utilisation dans des produits hydratants efficaces ne sont pas encore bien compris. MethodesPour apporter des réponses à ces questions, nous avons étudié l’effet hydratant des 41 éléments (4 classes différentes) largement utilisés dans une émulsion simple O/W en utilisant des méthodes de capacitance. 106 huiles individuelles différentes et des combinaisons d’huile avec de l’huile, de la cire, des humectants, et de tensioactifs ont été formulées et testées. ResultatsDans cette étude, nous avons constaté que la plupart des composants des émulsions huile-dans-eau (H/E) possédaient des effets d’hydratation de la peau. (i) Le taux moyen d’augmentation d’eau (RWCI = relative water content increase) d’une émulsion à base d’une seule huile était de 11,8 ± 5,2% (SE) et de 7,9 ± 6,0% (SE) à 3 et 6 h, respectivement. (ii) Une émulsion de combinaison d’huile montrait une RWCI similaire à celle d’une émulsion à base d’huile unique, 12,6 ± 6,0% (SE) et 12,1 ± 6,4% (SE) à 3 et 6 h, respectivement. (iii) Une combinaison des cires avec de l’huile présentait une RWCI de 16 ± 5,6% (SE) et 12,4 ± 4,5% (SE) à 3 et 6 h, respectivement. (iv) Les combinaisons d’humectant ont montré la plus forte augmentation avec +28 ± 7,3% (SE) et 22,2 ± 7,5% (SE) à 3 et 6 h, respectivement. (v) Les combinaisons de tensioactifs ont une RWCI moyenne de 10,8 ± 4,5% (SE) et de 6,0 ± 4,0% (SE) à 3 et 6 h, respectivement. ConclusionFait intéressant, il était difficile de trouver des différences de pouvoir d’hydratation entre les échantillons dans le même groupe. Seul le groupe des humectants a montré des différences significatives entre les échantillons. La glycérine et l’urée ont montré des effets significatifs sur l’hydratation de la peau par rapport aux autres humectants. Nous avons également constaté un effet hydratant important en analysant les groupes fonctionnels chimiques; la classe “amide” a eu un effet d’hydratation plus élevé que les bétaînes et disaccharides dans les combinaisons des humectants. PMID:23621673

Etude du champ magnetique dans les nuages moleculaires

NASA Astrophysics Data System (ADS)

Houde, Martin

2001-12-01

Ce travail est une étude du champ magnétique duns l'environnement circumstellaire des étoiles jeunes. Il a pour origine la certitude qu'avait l'auteur qu'il se devait d'être possible de détecter la présence d'un champ magnétique, et de possiblement le caractériser, par le biais d'observations de profils spectraux d'espèces moléculaires ioniques. Il en découle donc qu'un des buts principaux était de prouver que cela est effectivement possible. La thèse comporte alors des éléments théoriques et expérimentaux qui sont à la fois complémentaires et intimement liés. L'aspect théorique est basé sur l'interaction mutuelle que des particules neutres et chargées peuvent avoir l'une sur l'autre daps un plasma faiblement ionisé comme ceux existants daps les nuages moléculaires sites de formation stellaire. Il appert que la présence d'un champ magnétique a un effet direct sur le comportement des ions (via la force de Lorentz) et indirect sur les molécules neutres (via les nombreuses collisions entre les deux types de particules). Une telle interaction est, comme il est maintenant bien connu, présente dans les premières étapes de la formation dune étoile. Il s'agit bien sûr de la diffusion ambipolaire. Nous montrerons qu'il existe cependant un autre type de diffusion, jusqu'ici inconnue, qui se manifeste plus tard au tours de l'évolution des nuages moléculaires. Celle-ci peut avoir un effet dramatique sur l'apparence des profils spectraux (de rotation moléculaire) des espèces ioniques lorsque comparés à ceux qu'exhibent des espèces neutres coexistantes. Mais pour ce faire, il doit y avoir existence de mouvements organisés (des flots ou jets) de matière ou encore la présence de turbulence dans les régions considérées. Une distribution de vélocité du type maxwellienne ne révèlera pas la présence du champ magnétique. Les observations, qui ont pour but de confirmer la théorie, se situent dans le domaine des longueurs d'ondes millimétriques et sous- millimétriques. Plusieurs espèces moléculaires furent détectées dans un échantillon significatif de nuages moléculaires. L'effet prédit fut confirmé et ce peu importe si les raies observées sont opaques ou transparentes. Dans le dernier chapitre, nous considérerons une application intéressante où nous utiliserons la manifestation de cet effet (ou son manque) pour vérifier l'alignement préférentiel des flots bipolaires, qui accompagnent souvent la présence de proto- étoiles, avec le champ magnétique local.

Motion Cues in Flight Simulation and Simulator Induced Sickness

DTIC Science & Technology

1988-06-01

asseusod in a driving simulator by means of a response surface methodology central-composite design . The most salient finding of the study was that visual...across treatment conditions. For an orthogonal response surface methodology (IBM) design with only tro independent variables. it can be readily shown that...J.E.Fowikes 8 SESSION III - ETIOLOGICAL FACTORS IN SIMULATOR-INDUCED AFTER EFFETS THE USE OF VE& IIBULAR MODELS FOR DESIGN AND EVALUATION OF FLIGHT

Environmental Exposure and Design Criteria for Offshore Oil and Gas Structures

DTIC Science & Technology

1980-05-01

reliability ar_alysis. Because there are no clear lines of demarcation between them, these methods are often used in varying combinations. Sound ...cludes that OCSEA-P not now effe.tively contribute...to the accrual of sound scientific information adequate for OCS management." One reason for such a...procedures for resolving differences need to be developed. Sound and timely assessments of environmental exposure risks will require: 1) adequate levels of

A Snowball's Chance? Communities and Families Working To Prevent Youth Crime = Effet de boule de neige? Les communautes et les familles collaborent a la prevention de la criminalite chez les jeunes.

ERIC Educational Resources Information Center

Theilheimer, Ish, Ed.; Eisner, Kathy, Ed.

1996-01-01

This issue of the Canadian quarterly "Transitions," in French and English language versions, examines the prevention of youth crime, with a specific focus on activities, trends, and research dealing with Canadian families. Major articles in this issue are: (1) "A Snowball's Chance? Communities and Families Working to Prevent Youth…

Superomniphobic Surfaces for Military Applications: Nano- and Micro-Fabrication Methods. Chapter 1: Lithographic Fabrication of Surfaces with Different Microgeometries and Investigation of Their Wetting Behaviour

DTIC Science & Technology

2011-01-01

plus important, comparativement à une échelle plus large. Les résultats indiquent qu’un effet de cette nature est attribuable à des facteurs...par un angle de contact à l’avancement plus petit et un angle de contact au retrait plus important, comparativement à une échelle plus large. Les...Methods ............................................................................................................ 10 3.1 Experimental Design

Recherche universitaire et priorites nationales: l'effet du financement public sur la recherche energie solaire au Canada (University Research and National Priorities: The Effect of Public Financing on Solar Energy Research in Canada).

ERIC Educational Resources Information Center

Dalpe, Robert; Gingras, Yves

1990-01-01

The role of two main sources of university research financing in solar energy is examined to assess whether they oriented research in the direction of government programs. The strongest relationship appears to be in journal publication patterns. This scientific community has acquired the capacity to tap varying sources. (Author/MSE)

Studies on the liver sequestration of lymphocytes bearing membrane-associated galactose-terminal glycoconjugates: reversal with agents that effectively compete for the asialoglycoprotein receptor.

PubMed

Samlowski, W E; Spangrude, G J; Daynes, R A

1984-10-15

The removal of "effete" glycoproteins from the circulation represents a proposed physiologic role for the hepatocyte asialoglycoprotein receptor. Our experiments support the hypothesis that this receptor may also be directly involved in the removal from the circulation of cells bearing asialoglycoconjugates. We report that the enhanced liver localization of neuraminidase-treated lymphocytes can be competitively inhibited by the coinjection of asialofetuin (ASF). Fetuin itself was without effect. Competitive inhibition of the liver receptor allowed normal localization to lymphoid tissues of the enzyme-treated lymphocytes, a condition which persisted as long as free ASF was present in the circulation. Our studies support the concept that cell surface carbohydrates play an important role in the tissue distribution of circulating lymphocytes. The process of thymocyte maturation, bone marrow transplantation, and the adoptive immunotherapy with continuous T-cell lines represent conditions where recirculation potential may be influenced by the presence of galactose terminal glycoconjugates.

Platelet-, leucocyte- and red cell-derived microparticles in stored whole blood, with and without leucofiltration, with and without ionising radiation.

PubMed

Saito, Shunnichi; Nollet, Kenneth E; Ngoma, Alain M; Ono, Takako; Ohto, Hitoshi

2018-02-01

Storage lesion, including microparticle formation, has been partially characterised in whole blood, but not in all combinations of pre-storage leucofiltration and/or irradiation. Single-donor whole blood products were processed into four subunits: with and without leucofiltration, with and without X-irradiation (25 Gy). Platelet-, leucocyte-, and erythrocyte-derived microparticles and free haemoglobin were measured periodically throughout 42 days of storage. Pre-storage leucofiltration substantially reduced platelet- and leucocyte-derived microparticle counts throughout storage. Irradiation, in contrast, had no significant effect on microparticle counts. A gate for all microparticles showed a substantial time-dependent increase in unfiltered whole blood. A time-dependent increase in free haemoglobin was greatest in unfiltered, irradiated whole blood. This study indicates that leucofiltration can prevent the formation of leucocyte- and platelet-derived microparticles, and might reduce haemolysis in irradiated whole blood, either by removing factors that provoke haemolysis, or by selective retention of senescent or effete red cells most prone to haemolysis.

Etude experimentale des excitations topologiques de l'effet Hall quantique a nu = 1 dans les heterostructures semiconductrices a double puits quantique

NASA Astrophysics Data System (ADS)

Charlebois, Serge

De nombreux travaux theoriques et experimentaux ont ete publies sur les excitations topologiques de gaz electroniques bidimensionnels (GE2D), appellees skyrmions, dans le regime de l'effet Hall quantique a remplissage unitaire. On attend des excitations semblables appellees bimerons dans les systemes formes de deux GE2D couples. Contrairement au cas des GE2D simples, aucune experience n'a, a notre connaissance, presente la mesure d'une propriete specifique aux bimerons. Nous presentons dans cette these des travaux experimentaux ayant pour objectif l'etude d'excitations topologiques dans les heterostructures a double puits quantique. Une manifestation attendue (les bimerons est la presence d'une anisotropie dans la conductivite a travers une constriction. Nous avons concu un dispositif original a point de contact a trois grilles non-coplanaires. Ce dispositif a trois grilles a la particularite de permettre la creation d'une constriction etroite dans le double GE2D tout en permettant l'equilibrage de la densite electronique entre les deux puits dans l'etroit canal de conduction. Nous avons fabrique ce dispositif de taille submicronique par electrolithographie sur des heterostructures a double puits. Les dispositifs ainsi fabriques ont ete etudies a basse temperature (0.3K) et ont montre un fonctionnement conforme aux attentes. Les travaux n'ont pas permis de mettre en evidence une anisotropie de transport revelatrice de l'existence de bimerons. Cette these est a notre connaissance la premiere etude experimentale visant la realisation de l'experience d'anisotropie de transport et est ainsi une contribution significative a l'avancement des connaissances dans ce domaine. Les travaux theoriques que nous presentons ont permis de montrer l'effet des excitations topologiques sur la capacite grille-GE2D du systeme. Ces travaux ouvrent la voie de la detection des bimerons par l'intermediaire de la mesure de la capacite grille-GE2D ou encore de la susceptibilite electrique du GE2D. Poursuivant cet objectif, nous avons concu, realise et teste un dispositif de mesure in situ de la capacite grille-GE2D d'une heterostructure. Nous avons egalement suggere d'autres methodes experimentales pour la mise en evidence des bimerons par le couplage de la texture de pseudospin a la capacite du GE2D.

Report of the Working Group on Aerodynamics of Aircraft Afterbody.

DTIC Science & Technology

1986-06-01

14 I 21 2.1.71 Addy A.L. Experimeftal-Theoretical Correlation of Supersonic Jet-on Base Pressure for Cylindrical Afterbodies. J. Aircraft, Vol. 7, No...An Improved Experimental-Theoretical Base Pressure Cor- Addy A.L. relation for Conical and Cylindrical Afterbodies with Agrell J. Centered Propulsive...2.1.92 Carri~re P. Effet d’une Injection de Fluide dans l’Eau-Morte sur les Conditions de Recollement d’un Ecoulement Plan Supersonique. Comptes

Wind Tunnel Wall Corrections (la Correction des effets de paroi en soufflerie)

DTIC Science & Technology

1998-10-01

round holes drilled either normal to the wall surface or at a fixed angle to the normal. Variable porosity features have been implemented in several...walls (holes drilled at 60 deg from the normal), including variable porosity configurations and the effects of screens and splitter plates for edge-tone...Figure 5.68 Schematic of slender wing and the indicated gauge func- tions in anticipation of matching. As detailed in Malmuth and Cole [122], the problems

Quel effet de l’euro sur le commerce europeen des produits forestiers? Académie d’Agriculture de France, Notes Académiques

Treesearch

Joseph Buongiorno

2015-01-01

The objective of this study was to determine the effect of the monetary union on the trade of forest products between euro-using countries. A differential gravity model of bilateral trade flows was developed and estimated with data for the bilateral trade between 12 euro countries from 1988 to 2013, for commodity groups HS44 (wood and articles of wood), HS47 (pulp of...

Africa Civic Action Planning and Implementation Guide

DTIC Science & Technology

1988-03-17

transfert du titre de propriet4 ou. que les d~fectuosit~s provenant de la conception sont... transfert du * .~.titre prendra effet normalement. au point de chargement chez le * fabricant; et pour ].es articles de de’fense fournis sur les stocks...dition avant l~e transfert . du Ititre de proprie’t4. Si l~e "lieu de livraison" d~sign4 est autre que le point initial d’expe’d’tion, l~e

Pharmacogénétique: qu'en est-il au Maroc?

PubMed Central

Idrissi, Meryem Janati; Ouldim, Karim; Amarti, Afaf; El Hassouni, Mohamed; Khabbal, Youssef

2013-01-01

La pharmacogénétique est l’étude de l'influence des variations génétiques interindividuelles sur la réponse aux médicaments, avec le but d'améliorer la prise en charge des patients en visant une médecine personnalisée. Au fait le génome de deux personnes ne diffère que par 0.1% des 3.2 milliards de paires de bases, ce qui implique les effets indésirables des médicaments, qui ont un très important impact sur le plan clinique que sur le plan économique. Or cette dernière décennie ces effets indésirables ont pu être évités grâce aux tests pharmacogénétiques. Au Maroc, la recherche en pharmacogénétique commence à susciter l'intérêt des chercheurs avec quelques études. Une toute première étude en 1986, sur l'acétylation de l'isoniazide chez la population marocaine, suivie par deux autres en 2011 se focalisant sur le métabolisme du tacrolimus et des anti-vitamines K. Ainsi l'espoir maintenant est d'identifier les majoritaires polymorphismes génétiques affectant les patients marocains, afin de leur fournir une prise en charge adaptée. PMID:23785548

Kerr effect in the isotropic phase of a side-chain polymeric liquid crystal

NASA Astrophysics Data System (ADS)

Reys, V.; Dormoy, Y.; Collin, D.; Keller, P.; Martinoty, P.

1992-02-01

The birefringence induced by a pulsed electrical field was used to study the pretransitional effects associated with the isotropic phase of a side-chain polysiloxane. The results obtained show that these effects are characterised by a conventional value of the static exponent and an abnormal value of the dynamic exponent, which shows that the dynamic theory of low molecular weight liquid crystals does not apply. The results also reveal competition between the dipolar moments induced by the electrical field and the permanent moments of the mesogenic molecules. La biréfringence induite par un champ électrique impulsionnel a été utilisée pour étudier les effets prétransitionnels associés à la phase isotrope d'un polysiloxane à chaînes latérales. Les résultats obtenus montrent que ces effets sont caractérisés par une valeur classique de l'exposant statique et une valeur anormale de l'exposant dynamique. Ce dernier résultat montre que la théorie dynamique des cristaux liquides de bas poids moléculaire n'est pas applicable au cas présent. Les expériences mettent également en évidence une compétition entre les moments dipolaires induits par le champ électrique et les moments permanents des molécules mésogènes.

Excitations Élémentaires au Voisinage de la Surface de Séparation d'un Métal Normal et d'un Métal Supraconducteur

NASA Astrophysics Data System (ADS)

Saint-James, Par D.

On étudie le spectre d'excitation pour une couche de métal normal déposée sur un supraconducteur. On montre que si l'interaction attractive électron-électron est négligeable dans le métal normal, il n'y a pas de gap d'énergie dans le spectre d'excitation, même si l'épaisseur de la couche normale est petite. Une étude analogue, conduisant à une conclusion similaire, est menée pour deux supraconducteurs accolés et pour des sphères de métal normal baignant dans un supraconducteur. L'effet prévu pourrait expliquer quelques résultats particuliers observés dans des mesures d'effet tunnel dans des supraconducteurs durs. The excitation spectrum of a layer of normal metal (N) deposited on a superconducting substrate (S) is discussed. It is shown that if the electron-electron attractive interaction is negligibly small in (N) there is no energy gap in the excitation spectrum even if the thickness of the layer (N) is small. A similar study, with equivalent conclusions, has been carried out for two superconductors and for normal metal spheres embedded in a superconductor. The effect may possibly explain some peculiar results of tunnelling experiments on hard superconductors.

A new approach to process control using Instability Index

NASA Astrophysics Data System (ADS)

Weintraub, Jeffrey; Warrick, Scott

2016-03-01

The merits of a robust Statistical Process Control (SPC) methodology have long been established. In response to the numerous SPC rule combinations, processes, and the high cost of containment, the Instability Index (ISTAB) is presented as a tool for managing these complexities. ISTAB focuses limited resources on key issues and provides a window into the stability of manufacturing operations. ISTAB takes advantage of the statistical nature of processes by comparing the observed average run length (OARL) to the expected run length (ARL), resulting in a gap value called the ISTAB index. The ISTAB index has three characteristic behaviors that are indicative of defects in an SPC instance. Case 1: The observed average run length is excessively long relative to expectation. ISTAB > 0 is indicating the possibility that the limits are too wide. Case 2: The observed average run length is consistent with expectation. ISTAB near zero is indicating that the process is stable. Case 3: The observed average run length is inordinately short relative to expectation. ISTAB < 0 is indicating that the limits are too tight, the process is unstable or both. The probability distribution of run length is the basis for establishing an ARL. We demonstrate that the geometric distribution is a good approximation to run length across a wide variety of rule sets. Excessively long run lengths are associated with one kind of defect in an SPC instance; inordinately short run lengths are associated with another. A sampling distribution is introduced as a way to quantify excessively long and inordinately short observed run lengths. This paper provides detailed guidance for action limits on these run lengths. ISTAB as a statistical method of review facilitates automated instability detection. This paper proposes a management system based on ISTAB as an enhancement to more traditional SPC approaches.

Pharmacothérapie de la dépression chez les aînés

PubMed Central

Frank, Christopher

2014-01-01

Résumé Objectif Discuter du traitement pharmacologique de la dépression chez les personnes âgées, y compris le choix des antidépresseurs, le titrage de la dose, la surveillance de la réponse et des effets secondaires et le traitement des cas réfractaires. Sources des données Les lignes directrices de 2006 de la Canadian Coalition for Seniors’ Mental Health sur l’évaluation et le traitement de la dépression ont servi comme source principale. Pour recenser les articles publiés après les lignes directrices, on a procédé à une recherche documentaire dans MEDLINE de 2007 à 2012 à l’aide des expressions en anglais depression, treatment, drug therapy et elderly. Message principal Le but du traitement devrait être la rémission des symptômes. L’amélioration des symptômes peut être surveillée en fonction des objectifs du patient qu’on a identifiés ou en se servant d’outils cliniques comme le Patient Health Questionnaire–9. On devrait envisager le traitement en 3 étapes: l’étape du traitement aigu pour obtenir la rémission des symptômes, une étape de continuation pour prévenir la récurrence d’un même épisode de la maladie (rechute) et une étape de maintien (prophylaxie) pour prévenir de futurs épisodes (récurrence). Le dosage initial devrait être la moitié de la dose de départ habituelle chez l’adulte et il devrait être titré régulièrement jusqu’à ce que le patient réponde, jusqu’à ce que la dose maximale soit atteinte ou encore que les effets secondaires en limitent l’augmentation. Parmi les effets secondaires fréquents, on peut mentionner les chutes, la nausée, les étourdissements, les céphalées et, moins communément, l’hyponatrémie et des changements dans l’intervalle QT. Des stratégies pour changer ou augmenter les antidépresseurs sont présentées. Les patients plus âgés devraient être traités pendant au moins un an à compter de l’observation d’une amélioration clinique et ceux qui ont une dépression récurrente ou des symptômes sévères devraient continuer le traitement indéfiniment. La prise en charge de situations particulières comme une dépression profonde ou une dépression avec psychose est discutée, y compris le recours à une thérapie électroconvulsive. Les critères pour demander une consultation en psychiatrie gériatrique sont indiqués; par ailleurs, de nombreux médecins de famille n’ont pas aisément accès à une telle ressource ou à d’autres stratégies cliniques non pharmacologiques. Conclusion L’efficacité de la pharmacothérapie de la dépression n’est pas considérablement influencée par l’âge. L’identification de la dépression, le choix du traitement approprié, le tritrage des médicaments, la surveillance des effets secondaires et la durée suffisante du traitement amélioreront les résultats pour les patients plus âgés.

Developpement et validation d'un outil base sur l'acoustique geometrique pour le diagnostic du bruit de nacelle

NASA Astrophysics Data System (ADS)

Minard, Benoit

De nos jours, la problématique du bruit généré par les avions est devenue un point de développement important dans le domaine de l'aéronautique. C'est ainsi que de nombreuses études sont faites dans le domaine et une première approche consiste à modéliser de façon numérique ce bruit de manière à réduire de façon conséquente les coûts lors de la conception. C'est dans ce contexte qu'un motoriste a demandé à l'université de Sherbrooke, et plus particulièrement au groupe d'acoustique de l'Université de Sherbrooke (GAUS), de développer un outil de calcul de la propagation des ondes acoustiques dans les nacelles mais aussi pour l'étude des effets d'installation. Cet outil de prédiction leur permet de réaliser des études afin d'optimiser les traitements acoustiques (« liners »), la géométrie de ces nacelles pour des études portant sur l'intérieur de la nacelle et des études de positionnement des moteurs et de design pour les effets d'installation. L'objectif de ce projet de maîtrise était donc de poursuivre le travail réalisé par [gousset, 2011] sur l'utilisation d'une méthode de lancer de rayons pour l'étude des effets d'installation des moteurs d'avion. L'amélioration du code, sa rapidité, sa fiabilité et sa généralité étaient les objectifs principaux. Le code peut être utilisé avec des traitements acoustiques de surfaces («liners») et peut prendre en compte le phénomène de la diffraction par les arêtes et enfin peut être utilisé pour réaliser des études dans des environnements complexes tels que les nacelles d'avion. Le code développé fonctionne en 3D et procéde en 3 étapes : (1) Calcul des faisceaux initiaux (division d'une sphère, demi-sphère, maillage des surfaces de la géométrie) (2) Propagation des faisceaux dans l'environnement d'étude : calcul de toutes les caractéristiques des rayons convergents (amplitude, phase, nombre de réflexions, ...) (3) Reconstruction du champ de pression en un ou plusieurs points de l'espace à partir de rayons convergents (sommation des contributions de chaque rayon) : sommation cohérente. Le code (GA3DP) permet de prendre en compte les traitements de surface des parois, la directivité de la source, l'atténuation atmosphérique et la diffraction d'ordre 1. Le code a été validé en utilisant différentes méthodes telles que la méthode des sources-images, la méthode d'analyse modale ou encore la méthode des éléments finis de frontière. Un module Matlab a été créé spécialement pour l'étude des effets d'installation et intégré au code existant chez Pratt & Whitney Canada. Mots-clés : Acoustique géométrique - Ray-Tracing - Lancer de faisceaux - Diffraction - Sommation Cohérente - Niveau de Pression.

78 FR 67188 - Agency Information Collection Activities: Submitted for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... production method. 1206.259(c)(1)(ii) and (c)(2)(iii). Submit arm's-length and non- AUDIT PROCESS (See Note...-length AUDIT PROCESS (See Note). transportation contracts, production agreements, operating agreements...-length AUDIT PROCESS (See Note). power plant contracts, production and operating agreements and related...

78 FR 9732 - Agency Information Collection Activities: Submitted for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

...-length AUDIT PROCESS--See Note. transmission contracts, production and operating agreements and related... interest. 1206.354(n) Submit all arm's-length AUDIT PROCESS--See Note. power plant contracts, production... production method. 1206.458(c)(1)(iv) and (c)(2)(vi).. Submit arm's-length washing AUDIT PROCESS--See Note...

[Comparative study of cone-beam CT and spiral CT in measuring the length of styloid process].

PubMed

Song, Y S; Liu, L F

2018-06-19

Objective: To compare the difference of measuring the length of styloid process between spiral CT with high resolution and cone-beam CT(CBCT). Methods: Five specimens (including 5 pairs of styloid processes) were selected randomly from the Anatomy Laboratory of Otolaryngology Department, all the specimens underwent spiral CT with high resolution and cone-beam CT retrospectively.With the original DICOM data, the styloid processes were shown in one plate by multiple plate reconstruction technique, and later the length of styloid processes of each specimen were measured separately by software NNT Viewer (to CBCT) or Osrix (to spiral CT with high resolution). Results: The length of styloid processes measured by CBCT and spiral CT was (26.8±5.5) mm and (27.1±5.4) mm respectively, and there was no statistical difference between the two groups. Conclusion: In respect of measuring the length of styloid process, the CBCT has the same value in clinical practice comparing to spiral CT with high resolution.

Technical Evaluation Report on the Fluid Dynamics Panel Specialists’ Meeting on Effects of Adverse Weather on Aerodynamics (Les Effets des Conditions Meteorologiques Adverses sur l’Aerodynamique)

DTIC Science & Technology

1991-11-01

AD-A245 117 III~i~IIiiIiIIi~ifhII _________________________AGARD-R306 0 AGARD ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 4 7 RUE ANCELLE...REPRODUCE LEGIBLY. AGARD-AR-306 ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 7 RUE ANCELLE 92200 NEUILLY SUR SEINE FRANCE AGARD ADVISORY RIEPORT...Conditions NMeleorolovioiue,, Adverscs sur rAerodynarminiuc) - J.J. Reinrnann National ,\\cronautico and Space .\\drmintration L eip Research (Center

L'effet de la mise en page d'un livre sur le pairage du texte et de l'illustration par le jeune lecteur (The Effect of Book Layout on the Linking of Text and Illustrations by the Young Reader).

ERIC Educational Resources Information Center

Reinwein, Joachim

A study investigated the degree to which the page layout of a book affects the young reader's association of text with appropriate illustrations. Four hundred native French-speaking third-graders in eight Montreal (Canada) schools participated. In a third-grade text about animals, the names of the animals illustrated in pictures and other words…

CFD Simulations of a Ferry in Head Seas

DTIC Science & Technology

2011-03-01

la durée de vie en fatigue globale du navire. Il est important, pour la conception, l’exploitation et la gestion du cycle de ...vibration de frottement qui exerce une contrainte sur la structure de coque primaire et qui a un effet défavorable sur la durée de vie en fatigue globale du ...laquelle ne peut simuler directement la physique du tossage. Le présent rapport contient les résultats d’une étude faisant

Real-Time Adaptive Control of Mixing in a Plane Shear Layer

DTIC Science & Technology

1994-02-02

l’icoulement d’un fuide visqueux incompressible autour d’un cylinder fixe ou en rotation. Effet Magnus . J. Mdc. 14, 109-134. TANEDA, S. 1977 Visual study...Mokhtarian & Yokomizo 1990), and in lift enhancement schemes employing the Magnus effect (Swanson 1961). Rotation of all or part of a body may also have...coordinate system. In this work, the body-fitted grid is simply one of cylindrical polar coordinates and is time-independent, except for a = 3.25 where

RTO Meeting Proceedings 16, Aircraft Weapon System Compatibility and Integration held in Chester, United Kingdom, 28-30 September, 1998

DTIC Science & Technology

1999-04-01

project, there was a requirement to place a camera behind a each photogrammetric target in the image and for each cylindrically curved window...testing. T by the wind tunnel’s captive trajectory sting, U.S. wing open effets on the o erthnd, h e Navyengneer h e obervd sgnifcan difereces wing...Flying Qualities, Symposium on Aeroballistics, May 1981. Aerodynamics, and Structures disciplines benefit directly 6. Magnus , A. E., and Epton, M. A

Development of the Wake Behind a Circular Cylinder Impulsively Started into Rotatory and Rectilinear Motion: Intermediate Rotation Rates

DTIC Science & Technology

1991-01-01

cylindre fixe ou en rotation. Effet Magnus . J. Mec. 14, 109-134. Taneda, S. 1977 Visual study of unsteady separated flows around bodies. Prog. Aero...enhancement schemes employing the Magnus effect (Swanson 1961). Rotating all or part of a body may also have applications in active or feedback control of...and yt into the governing equations in the generalized coordinate system. In this study, the body-fitted grid is simply one of cylindrical polar

AFTERRISE: Deep Body Temperature Following Exercise

DTIC Science & Technology

1992-04-01

Egalement, les effets de la posture et des v~tements durant la r~cup~ration et la temperature de la salle de r~cup~ration furent examines. Cinq hommes...une chemise a manches courtes). Les tempdratures rectales et de la peau furent mesurdes & chaque minute durant les exercices et la r6cupdration...Ndcnillll~ l OLen 1+ 1DNfnce na~on~e :x DTIC Ss ELECTE FEB 5 1993DI C AFTERRISE: DEEP BODY TEMPERATURE FOLLOWING EXERCISE (U) by S. Tuck and A.A

Why Cold-Wet Makes One Feel Chilled: A Literature Review

DTIC Science & Technology

1988-06-01

froid et mouill6. On examine aussi l’effet de la radiation solaire , l’interaction entre la peau at l’humidit6, entre la peau et la temp~rature de mgme...directions, including back out into space. Aerosols of water in clouds reflect incident solar energy . The upper surface of a stratus cloud cover can reflect...earth than under clear conditions. Albedo, the fraction of the incident energy which is reflected by a surface, varies considerably with the terrain

Hygrothermal Effects in Continuous Fibre Reinforced Composites. Part 4. Mechanical Properties 2 - Fatigue and Time-Dependent Properties (Effets Hygrothermiques dans les Composites a Renfort de Fibre Continu. Partie 4. Proprietes Mecaniques 2 - Fatigue et Proprietes Dependant du Temps)

DTIC Science & Technology

1983-09-01

reduction of stress intensity at a crack tip due to Lreep was responsible for increasing the fatigue life during the "slow- fast " L .sts. As creep is clearly...Aeronautical Establishment Structures and Materials Laboratory SPONSORING AGENCY/AGENCE DE SUBVENTION 8 DATE FILE/DOSSIER LAB. ORDER PAGES FIGS/ DIAGRAMMES

Relativité générale et gravitation.

NASA Astrophysics Data System (ADS)

Elbaz, E.

Contents: 1. Description de l'univers observable. 2. Lemicro-univers des particules élémentaires. 3. Analyse tensorielle.4. Relativité restreinte. 5. Effet de la gravitation en relativité générale. 6. Équations d'Einstein. 7. Ondes gravitationnelles. 8. Champ de gravitation statique et isotrope. 9. Structures stellaires. 10. Champ de gravitation non statique isotrope. 11. Introduction à la dynamique cosmologique et au modèle standard de l'univers très primitif. 12. Perspectives actuelles.

The role of feedback information for calibration and attunement in perceiving length by dynamic touch.

PubMed

Withagen, Rob; Michaels, Claire F

2005-12-01

Two processes have been hypothesized to underlie improvement in perception: attunement and calibration. These processes were examined in a dynamic touch paradigm in which participants were asked to report the lengths of unseen, wielded rods differing in length, diameter, and material. Two experiments addressed whether feedback informs about the need for reattunement and recalibration. Feedback indicating actual length induced both recalibration and reattunement. Recalibration did not occur when feedback indicated only whether 2 rods were of the same length or of different lengths. Such feedback, however, did induce reattunement. These results suggest that attunement and calibration are dissociable processes and that feedback informs which is needed. The observed change in variable use has implications also for research on what mechanical variables underlie length perception by dynamic touch. (c) 2005 APA, all rights reserved.

Are Japanese groups more competitive than Japanese individuals? A cross-cultural validation of the interindividual-intergroup discontinuity effect.

PubMed

Takemura, Kosuke; Yuki, Masaki

2007-02-01

The interindividual-intergroup discontinuity effect is the tendency for relationships between groups to be more competitive than the relationships between individuals. It has been observed robustly in studies conducted in the United States, which is a society characterized as "individualistic." In this study, it was explored whether the effect was replicable in a "collectivistic" society such as Japan. From the traditional view in cross-cultural psychology, which emphasizes the collectivistic nature of East Asian peoples, it was expected that the discontinuity effect would be greater in Japan than in the United States. On the other hand, based on recent empirical findings suggesting that North Americans are no less group-oriented than East Asians, it was expected that the discontinuity effect would be no greater in Japan than in the United States. One hundred and sixty Japanese university students played a 10-trial repeated prisoner's dilemma game: 26 sessions of interindividual and 18 sessions of intergroup. Following exactly the procedure of prior experiments in the US, individuals and groups were allowed face-to-face communication with their opponents before making their decisions, and participants in the intergroup condition were further allowed to converse freely with their in-group members. Results replicated previous findings in the United States; groups made more competitive choices than did individuals. In addition, neither the magnitude of the discontinuity effect, nor the frequency of competitive choices made by the groups, were larger in Japan than they were in the majority of prior studies conducted in the United States. These findings suggest cross-cultural robustness of the interindividual-intergroup discontinuity effect. Also, interestingly, they contradict the simple distinction between individualism and collectivism. Implications for studies of culture and group processes are discussed. This research was supported by grants from the Center for the Study of Cultural and Ecological Foundations of the Mind, a 21(st) Century Center of Excellence Program at Hokkaido University. The authors would like to thank Dr. Laura Hernández-Guzmán, three anonymous reviewers, and Robin Cooper, Mark H. B. Radford, and Paul A. Wehr for their helpful comments on earlier versions of this article. They would also like to thank Dr. Chester A. Insko for his kind and valuable advice during the planning of this experiment as well as the interpretation of its results, Kaori Akaishi for her help with data collection, and, finally, colleagues at Hokkaido University who helped to recruit potential participants from their classes. L'effet de discontinuité entre les individus et entre les groupes est la tendance des relations entre les groupes à être plus compétitives que les relations entre les individus. Cet effet fut fermement démontré dans des études menées aux États-Unis, une société caractérisée d' «individualiste». Dans la présente étude, nous avons exploré dans quelle mesure l'effet était applicable à une société «collectiviste» comme le Japon. À partir du point de vue traditionnel de la psychologie interculturelle, laquelle met l'emphase sur la nature collectiviste des peuples de l'Asie de l'Est, il était attendu que l'effet de discontinuité allait être plus grand au Japon qu'aux États-Unis. D'un autre côté, se basant sur les données empiriques récentes qui suggèrent que les Nord-américains ne sont pas moins orientés vers le groupe que les Asiatiques de l'Est, il était attendu que l'effet de discontinuité ne serait pas plus important au Japon qu'aux États-Unis. Cent soixante étudiants universitaires japonais ont pris part à un jeu de dilemme de prisonnier de 10 essais répétés: 26 sessions entre individus et 18 sessions entre groupes. Suivant exactement la procédure des expériences menées précédemment aux États-Unis, les individus et les groupes avaient la permission de communiquer face-à-face avec leur opposant avant de prendre leur décision. De plus, les participants de la condition entre groupes avaient également la possibilité de converser librement avec les membres de leur propre groupe. Les résultats se sont révélés semblables à ceux des études antérieures réalisées aux États-Unis; les groupes ont fait des choix plus compétitifs que les individus. En outre, ni la magnitude de l'effet de discontinuité, ni la fréquence des choix compétitifs faits par les groupes n'étaient plus grands chez les Japonais comparativement à la majorité des études antérieures menées aux États-Unis. Ces résultats soutiennent la robustesse interculturelle de l'effet de discontinuité entre les individus et entre les groupes. Aussi, fait intéressant, ils contredisent la simple distinction entre l'individualisme et le collectivisme. Les implications pour des études sur les cultures et les processus de groupe sont discutées. El efecto de discontinuidad entre individuos y entre grupos es la tendencia a que las relaciones entre grupos sean más competitivas que las relaciones entre individuos. Se ha observado con insistencia en estudios conducidos en Estados Unidos, una sociedad caracterizada como "individualista". En el presente estudio, se exploró si el efecto se repetía en una sociedad "colectivista" como la japonesa. Desde la perspectiva tradicional de la psicología trans cultural, que subraya la naturaleza colectivista de los pueblos asiáticos, se esperaba que el efecto de discontinuidad fuese mayor en Japón que en Estados Unidos. Por otra parte, con base en los hallazgos empíricos recientes que sugieren que los estadounidenses no están menos orientados al grupo que los de este asiático, se esperaba que el efecto de discontinuidad no fuera mayor en Japón que en los Estados Unidos. Ciento sesenta estudiantes universitarios japoneses participaron en un juego del dilema de un prisionero de diez ensayos repetidos: veintiséis sesiones entre individuos y diez y ocho entre grupos. Siguiendo exactamente el procedimiento de los experimentos previos en los Estados Unidos, se permitió tanto a los individuos como a los grupos una comunicación cara a cara con sus oponentes antes de tomar sus decisiones, y se permitió a los participantes en la condición entre grupos que conversaran libremente con los miembros de su propio grupo. Los resultados repitieron los hallazgos previos en los Estados Unidos; los grupos hicieron elecciones más competitivas que los individuos. Además, ni la magnitud del efecto de discontinuidad ni la frecuencia de las elecciones competitivas de los grupos, fueron mayores en Japón que en la mayoría de los estudios previos en Estados Unidos. Estos hallazgos sugieren la robustez trans cultural del efecto de discontinuidad entre individuos y entre grupos. También, de manera interesante, contradicen la simple distinción entre individualismo y colectivismo. Se discutieron las implicaciones para los estudios sobre cultura y procesos grupales.

Information content versus word length in random typing

NASA Astrophysics Data System (ADS)

Ferrer-i-Cancho, Ramon; Moscoso del Prado Martín, Fermín

2011-12-01

Recently, it has been claimed that a linear relationship between a measure of information content and word length is expected from word length optimization and it has been shown that this linearity is supported by a strong correlation between information content and word length in many languages (Piantadosi et al 2011 Proc. Nat. Acad. Sci. 108 3825). Here, we study in detail some connections between this measure and standard information theory. The relationship between the measure and word length is studied for the popular random typing process where a text is constructed by pressing keys at random from a keyboard containing letters and a space behaving as a word delimiter. Although this random process does not optimize word lengths according to information content, it exhibits a linear relationship between information content and word length. The exact slope and intercept are presented for three major variants of the random typing process. A strong correlation between information content and word length can simply arise from the units making a word (e.g., letters) and not necessarily from the interplay between a word and its context as proposed by Piantadosi and co-workers. In itself, the linear relation does not entail the results of any optimization process.

Time and length scales within a fire and implications for numerical simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

TIESZEN,SHELDON R.

2000-02-02

A partial non-dimensionalization of the Navier-Stokes equations is used to obtain order of magnitude estimates of the rate-controlling transport processes in the reacting portion of a fire plume as a function of length scale. Over continuum length scales, buoyant times scales vary as the square root of the length scale; advection time scales vary as the length scale, and diffusion time scales vary as the square of the length scale. Due to the variation with length scale, each process is dominant over a given range. The relationship of buoyancy and baroclinc vorticity generation is highlighted. For numerical simulation, first principlesmore » solution for fire problems is not possible with foreseeable computational hardware in the near future. Filtered transport equations with subgrid modeling will be required as two to three decades of length scale are captured by solution of discretized conservation equations. By whatever filtering process one employs, one must have humble expectations for the accuracy obtainable by numerical simulation for practical fire problems that contain important multi-physics/multi-length-scale coupling with up to 10 orders of magnitude in length scale.« less

Neural Processing of Acoustic Duration and Phonological German Vowel Length: Time Courses of Evoked Fields in Response to Speech and Nonspeech Signals

ERIC Educational Resources Information Center

Tomaschek, Fabian; Truckenbrodt, Hubert; Hertrich, Ingo

2013-01-01

Recent experiments showed that the perception of vowel length by German listeners exhibits the characteristics of categorical perception. The present study sought to find the neural activity reflecting categorical vowel length and the short-long boundary by examining the processing of non-contrastive durations and categorical length using MEG.…

Malformations congénitales à Lubumbashi (République Démocratique du Congo): à propos de 72 cas observés et plaidoyer en faveur du développement d'un Registre National des Malformations Congénitales et d'un Centre National de Référence de Génétique Humaine

PubMed Central

Lubala, Toni Kasole; Shongo, Mick Yapongombo; Munkana, Arthur Ndundula; Mutombo, Augustin Mulangu; Mbuyi, Sébastien Musanzayi; wa Momat, Félix Kitenge

2012-01-01

En République Démocratique du Congo, les malformations congénitales constituent un véritable problème de santé publique. En effet, elles relancent le débat sur les effets de l'intensification de l'activité minière sur la santé de la reproduction. De 2009 à 2010, nous avons calculé une prévalence de 5.84 pour 1000 naissances. Les malformations du système nerveux central étaient les plus fréquentes (2.029 pour 1000) suivies des malformations des membres (1.055 pour 1000), et des fentes oro-faciales (0.811 pour 1000). Ces données sont certainement largement sous-estimées et les causes y relatives en République Démocratique du Congo ne sont ni surveillées, ni prévenues dans le cadre d'une politique gouvernementale. La mise en place d'un registre national et d'un centre national de génétique humaine de référence pourrait constituer un cadre rigoureux, organisé et structuré de surveillance et de prévention des malformations congénitales. PMID:23396951

Influence des traitements thermiques et de la microstructure sur les phénomènes de découplage dans les composés au bismuth

NASA Astrophysics Data System (ADS)

Nicolas, M.; Guyen van Huong, C. N.; Burger, J. P.; Dubon, A.; Fitoussi, J. P.; Laval, J. Y.

1991-11-01

a.c. susceptibility measurements and 3D electronic microscopy observation were carried out on three Bi-compounds (2212 and 2223). Depending on the annealing conditions, one observes lamellar-type materials organized either in a more or less dense structure of fine particles or in very large slabs. The a.c. susceptibility signals allow to separate the intergranular from the intragranular effects. The combined results obtained by both techniques lead us to conclude that the intergranular and the intragranular decoupling, induced by magnetic fields are of same nature, i.e. occur at the (BiO)2 slab. Nous avons couplé des mesures de susceptibilité altemative et d'observation au microscope électronique en 3D sur trois échantillons supraconducteurs au bismuth (2212 et 2223). Selon les conditions de recuit, on observe des matériaux de type lamellaire, organisés soit en une structure plus ou moins dense de fines particules, soit en larges plaquettes. L'étude des signaux de susceptibilité alternative χ' et χ'' permet de séparer les effets intergranulaires des effets intragranulaires. les résultats combinés des deux techniques nous ont conduit à conclure que les deux types de découplage (inter et intragranulaires), induits par les champs magnétiques sont de même nature, c'est-à-dire se produisent au niveau des bicouches (BiO)2.

Magnétochiralité et résonances stochastiques dans les lasers

NASA Astrophysics Data System (ADS)

Bonnet, C.; Bretenaker, F.; Brunel, M.; Chauvat, D.; Emile, O.; Lai, N. D.; Le Floch, A.; Ropars, G.; Ruchon, T.; Singh, K.; Thépot, J.-Y.; Vallet, M.

2002-06-01

Les états propres d'un laser constituent un outil de choix pour étudier les différents rôles joués par le bruit dans un système. D'une part, si on veut isoler un effet petit difficilement accessible par les méthodes classiques, ces états propres permettent de réaliser des mesures différentielles de haute précision, à condition de pouvoir éliminer les bruits mécaniques, optiques, électroniques. A titre d'exemple, nous avons utilisé les états propageant et contrapropageant d'un laser ionique en anneau pour mesurer une interaction fondamentale faible: la biréfringence magnétochirale. Cette "biréfringence" se manifeste en effet par une petite variation d'indice selon le sens de parcours de l'anneau, de l'ordre de Δ n.10^{-11}, indépendante de la polarisation. A l'opposé, les deux états propres d'un laser du type Fabry-Perot constituent un système idéal pour explorer les résonances stochastiques à deux dimensions. Les résonances stochastiques par inhibition et par rotation sont isolées en présence de bruits blancs gaussiens tant pour les bruits optiques que magnétiques. L'utilisation possible de l'émission spontanée comme bruit actif est démontrée.

Les fluctuations supraconductrices dans le compose praseodyme-cerium-oxyde de cuivre

NASA Astrophysics Data System (ADS)

Renaud, Jacques

Ce travail etudie les fluctuations supraconductrices dans le compose supraconducteur a haute temperature critique dope aux electrons Pr2-xCe xCuO4+delta. La technique utilisee pour sonder ces fluctuations est le transport electrique DC dans le plan ab. Il s'agit, a notre connaissance, de la premiere etude de ce type dans la classe generale des supraconducteurs a haute temperature critique dopes aux electrons et, plus particulierement, dans Pr2-xCe xCuO4+delta. De plus, l'etude est effectuee pour trois regimes de dopage, soit sous-dope x = 0.135, dopage optimal x = 0.15 et surdope x = 0.17. Les echantillons etudies sont des couches minces d'epaisseur plus grande que 100 nm crues par ablation laser. Les mesures electriques DC effectuees dans ce travail sont la resistance en reponse lineaire et les courbes IV en reponse non lineaire en fonction de la temperature. La mise en oeuvre experimentale de ces mesures a necessite une grande attention au filtrage et aux effets de chauffage a haut courant. Nous montrons que, sans cette attention, les donnees experimentales sont toujours erronees dans le regime pertinent pour nos echantillons. Les resultats pour le dopage optimal x = 0.15 sont expliques de facon tres convaincante dans le cadre de fluctuations purement 2D. D'abord, le regime des fluctuations gaussiennes est tres bien decrit par le modele d'Aslamazov-Larkin en deux dimensions. Ensuite, le regime de fluctuations critiques, se trouvant a plus basse temperature que le regime gaussien, est tres bien decrit par la physique 2D de Kosterlitz-Thouless. Dans cette analyse, les deux regimes ont des temperatures critiques coherentes entre elles, ce qui semble confirmer ce scenario 2D. Une analyse des donnees dans le cadre de fluctuations 3D est exploree mais donne des conclusions incoherentes. Les resultats pour les autres dopages sont qualitativement equivalents avec le dopage optimal et permettent donc une explication purement 2D. Par contre, contrairement au dopage optimal, les effets du desordre semblent etre tres importants. Une analyse detaillee de tous ces resultats semble indiquer que les signatures 2D in identifiees proviennent vraisemblablement de plans paralleles decouples formes d'environ 4 plans CuO2 couples. On discute de cette mise en ordre partielle comme une possible consequence d'une separation de phase isolante antiferromagnetique/supraconducteur. La largeur de la transition en fonction du dopage est aussi analysee dans le but de mettre en lumiere un possible effet du pseudogap. On montre que nos mesures ne supportent pas une telle interpretation.

Suivi après le traitement du cancer du sein

PubMed Central

Sisler, Jeffrey; Chaput, Geneviève; Sussman, Jonathan; Ozokwelu, Emmanuel

2016-01-01

Résumé Objectif Offrir aux médecins de famille un résumé des recommandations fondées sur les données probantes pour guider les soins aux survivantes traitées pour le cancer du sein. Qualité des données Une recherche documentaire a été effectuée dans MEDLINE entre 2000 et 2016 à l’aide des mots-clés anglais suivants : breast cancer, survivorship, follow-up care, aftercare, guidelines et survivorship care plans, en se concentrant sur la revue des lignes directrices publiées récemment par les organismes nationaux de cancérologie. Les données étaient de niveaux I à III. Message principal Les soins aux survivantes comportent 4 facettes : surveillance et dépistage, prise en charge des effets à long terme, promotion de la santé et coordination des soins. La surveillance des récidives ne se traduit que par une mammographie annuelle, et le dépistage d’autres cancers doit suivre les lignes directrices basées sur la population. La prise en charge des effets à long terme du cancer et de son traitement aborde des problèmes courants tels la douleur, la fatigue, le lymphœdème, la détresse et les effets indésirables des médicaments, de même que les préoccupations à long terme comme la santé du cœur et des os. La promotion de la santé met en relief les bienfaits de l’activité chez les survivantes du cancer, avec l’accent mis sur l’activité physique. Les soins aux survivantes sont de meilleure qualité lorsque divers services et professionnels de la santé participent aux soins, et le médecin de famille joue un rôle important dans la coordination des soins. Conclusion Les médecins de famille sont de plus en plus souvent les principaux fournisseurs de soins de suivi après le traitement du cancer du sein. Le cancer du sein doit être considéré comme une affection médicale chronique, même chez les femmes en rémission, et les patientes profitent de la même approche que celle utilisée pour les autres affections chroniques en soins de première ligne. PMID:27737992

GeoGebra Assist Discovery Learning Model for Problem Solving Ability and Attitude toward Mathematics

NASA Astrophysics Data System (ADS)

Murni, V.; Sariyasa, S.; Ardana, I. M.

2017-09-01

This study aims to describe the effet of GeoGebra utilization in the discovery learning model on mathematical problem solving ability and students’ attitude toward mathematics. This research was quasi experimental and post-test only control group design was used in this study. The population in this study was 181 of students. The sampling technique used was cluster random sampling, so the sample in this study was 120 students divided into 4 classes, 2 classes for the experimental class and 2 classes for the control class. Data were analyzed by using one way MANOVA. The results of data analysis showed that the utilization of GeoGebra in discovery learning can lead to solving problems and attitudes towards mathematics are better. This is because the presentation of problems using geogebra can assist students in identifying and solving problems and attracting students’ interest because geogebra provides an immediate response process to students. The results of the research are the utilization of geogebra in the discovery learning can be applied in learning and teaching wider subject matter, beside subject matter in this study.

Platelet-, leucocyte- and red cell-derived microparticles in stored whole blood, with and without leucofiltration, with and without ionising radiation

PubMed Central

Saito, Shunnichi; Ngoma, Alain M.; Ono, Takako; Ohto, Hitoshi

2018-01-01

Background Storage lesion, including microparticle formation, has been partially characterised in whole blood, but not in all combinations of pre-storage leucofiltration and/or irradiation. Materials and methods Single-donor whole blood products were processed into four subunits: with and without leucofiltration, with and without X-irradiation (25 Gy). Platelet-, leucocyte-, and erythrocyte-derived microparticles and free haemoglobin were measured periodically throughout 42 days of storage. Results Pre-storage leucofiltration substantially reduced platelet- and leucocyte-derived microparticle counts throughout storage. Irradiation, in contrast, had no significant effect on microparticle counts. A gate for all microparticles showed a substantial time-dependent increase in unfiltered whole blood. A time-dependent increase in free haemoglobin was greatest in unfiltered, irradiated whole blood. Discussion This study indicates that leucofiltration can prevent the formation of leucocyte- and platelet-derived microparticles, and might reduce haemolysis in irradiated whole blood, either by removing factors that provoke haemolysis, or by selective retention of senescent or effete red cells most prone to haemolysis. PMID:27893349

Effective ergodicity breaking in an exclusion process with varying system length

NASA Astrophysics Data System (ADS)

Schultens, Christoph; Schadschneider, Andreas; Arita, Chikashi

2015-09-01

Stochastic processes of interacting particles in systems with varying length are relevant e.g. for several biological applications. We try to explore what kind of new physical effects one can expect in such systems. As an example, we extend the exclusive queueing process that can be viewed as a one-dimensional exclusion process with varying length, by introducing Langmuir kinetics. This process can be interpreted as an effective model for a queue that interacts with other queues by allowing incoming and leaving of customers in the bulk. We find surprising indications for breaking of ergodicity in a certain parameter regime, where the asymptotic growth behavior depends on the initial length. We show that a random walk with site-dependent hopping probabilities exhibits qualitatively the same behavior.

Etude analytique et numérique de la réponse en vibration à hautes fréquences d'éprouvettes de fatigue vibratoire des métaux. Application aux aciers

NASA Astrophysics Data System (ADS)

Ben Aich, A.; El Kihel, B.; Kifani, A.; Sahban, F.

1994-07-01

In the present paper, the so-called " ultrasonic fatigue " or fatigue at very high frequency has been studied in the materials elastic behaviour case while neglecting the thermal effects that influence the mechanical fields. The determination of mechanical fields and specimen resonance length has been done both analytically and numerically. The numerical method used for this calculation is the finite element method (FEM). Martensitic steel " Soleil A2 " and austenitic steel " ICL 472 BC " have been considered in order to compare the two methods (analytical and numerical). It is shown that a perfect convergence is obtained between the two solutions. Dans le présent travail, la fatigue vibratoire a été étudiée dans le cas du comportement élastique des matériaux en négligeant les effets thermiques pouvant influencer les champs mécaniques. La détermination de ces champs et de la longueur de résonance des éprouvettes de fatigue a été faite analytiquement et numériquement. Le calcul numérique effectué se base sur la méthode des éléments finis. Dans le but d'une comparaison des solutions analytiques et numériques, deux aciers ont été considérés : un acier martensitique (Soleil A2) et un acier austénitique de type 18-10 (ICL 472 BC). Une parfaite convergence est obtenue entre les deux solutions.

Coracoid process x-ray investigation before Latarjet procedure: a radioanatomic study.

PubMed

Bachy, Manon; Lapner, Peter L C; Goutallier, Daniel; Allain, Jérôme; Hernigou, Phillipe; Bénichou, Jacques; Zilber, Sébastien

2013-12-01

The purpose of this study was to determine whether a preoperative radiologic assessment of the coracoid process is predictive of the amount of bone available for coracoid transfer by the Latarjet procedure. Thirty-five patients with anterior instability undergoing a Latarjet procedure were included. A preoperative radiologic assessment was performed with the Bernageau and true anteroposterior (true AP) views. The length of the coracoid process was measured on both radiographic views and the values were compared with the length of the bone block during surgery. Statistical analysis was carried out by ANOVA and Wilcoxon tests (P < .05). On radiologic examination, the mean coracoid process length was 29 ± 4 and 33 ± 4 mm on the Bernageau and true AP views, respectively. The mean bone block length during surgery was 21.6 ± 2.7 mm. A significant correlation was found (P = .032) between the coracoid process length on the true AP view and the intraoperative bone block length. Preoperative planning for the Latarjet procedure, including graft orientation and screw placement, requires knowledge of the length of coracoid bone available for transfer. This can be facilitated with the use of preoperative standard radiographs, thus avoiding computed tomography. This planning allows the detection of coracoid process anatomic variations or the analysis of the remaining part of the coracoid process after failure of a first Latarjet procedure to avoid an iliac bone graft. Radiologic preoperative coracoid process measurement is an easy, reliable method to aid preoperative planning of the Latarjet procedure in primary surgery and reoperations. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. All rights reserved.

Foreign Exchange Value-at-Risk with Multiple Currency Exposure: A Multivariate and Copula Generalized Autoregressive Conditional Heteroskedasticity Approach

DTIC Science & Technology

2014-11-01

du taux de change, et les responsables de la gestion interne se voient donc pressés de trouver des ... mesurer les effets négatifs que peuvent avoir les fluctuations mo- nétaires sur le budget et la planification du MDN, il faut connaître le poids des ...qualités comparables et qu’ils permettent d’effectuer une meilleure évaluation du risque qu’avec la méthode courante. On obtient désormais des estimations de

Swell Across the Continental Shelf

DTIC Science & Technology

2001-09-01

Arlington, VA The views expressed in this thesis are those of the author and do not reflect the official policy or position of the Department of Defense ...le terme de source, tandis que les effets de la réfraction et du levage causés par les variations de profondeur aux échelles sous-maille sont...précisement pris en compte grâce aux rayons pré- calculés. Ainsi ce modèle peut être appliqué à de vastes zones côtières avec des maillages

C3I for Crisis, Emergency and Consequence Management (C3I pour la gestion des crises, des urgences et de leurs consequences)

DTIC Science & Technology

2009-05-01

Quelque soit le contexte, l’aide à la décision passe par une analyse en profondeur de trois (3) aspects importants interdépendants, à savoir le...information, including suggestions for reducing this burden to Department of Defense , Washington Headquarters Services, Directorate for Information...type de menace, nécessite en effet d’adopter une approche collective de la sécurité étendue à une coopération avec de multiples organisations civiles

Biological Effects of Ionising Radiation and Countermeasures (Les effets biologiques des rayonnements ionisants et leurs contre-mesures)

DTIC Science & Technology

2018-01-01

promote cooperative research and information exchange, and secondly an in-house delivery business model where S&T activities are conducted in a NATO...Panel These Panels and Group are the power-house of the collaborative model and are made up of national representatives as well as recognised world...of Radiation Injury and Recovery 1-31 1.3.3.2 Mini-Pig Model of Acute Radiation Syndrome ( ARS ) 1-31 1.3.3.3 Medical Countermeasures (MedCM) 1-32

Hygrothermal Effects in Continuous Fibre Reinforced Composites. Part I. Thermal and Moisture Diffusion in Composite Materials (Effets Hygrothermiques dans les Composites a Renfort de Fibre Continu. Partie I. Diffusion de L’Humidite et de la Chaleur dans les Materiaux Composites)

DTIC Science & Technology

1983-01-01

considered important, complete, and a lasting contribution to existing knowledge. -’ Mechanical Engineering Reports (MS): Scientific and technical information...pertaining to investigations outside aeronautics considered important, complete, and a lasting contribution to existing knowledge. * AERONAUTICAL...NOTES (AN): Information les~s broad in scope but nevertheless of importance as a * contribution to existing knowledge. LABORATORY TECHNICAL REPORTS (LTR

Research on Modelling the Effects of Personal Hearing Protection and Communications Devices on Speech Intelligibility in Noise

DTIC Science & Technology

2011-06-01

performance ont été observées entre les différents groupes de sujets en ce qui a trait à l’effet du mode d’utilisation passif comparativement à l’écoute sans...work is staged over three fiscal/reporting periods as follows: Stage I (ending March 31st 2009): Design a Study Stage II (ending March 31st...under PWGSC Contract No. W7711-088145/001/TOR. It presents the study design and methods devised in Stage I, subjective and objective data collected

Process for fabricating continuous lengths of superconductor

DOEpatents

Kroeger, Donald M.; List, III, Frederick A.

1998-01-01

A process for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor precursor between said first substrate ribbon and said second substrates ribbon. The layered superconductor precursor is then heat treated to form a super conductor layer.

Constituent Length Affects Prosody and Processing for a Dative NP Ambiguity in Korean

ERIC Educational Resources Information Center

Hwang, Hyekyung; Schafer, Amy J.

2009-01-01

Two sentence processing experiments on a dative NP ambiguity in Korean demonstrate effects of phrase length on overt and implicit prosody. Both experiments controlled non-prosodic length factors by using long versus short proper names that occurred before the syntactically critical material. Experiment 1 found that long phrases induce different…

System for monitoring an industrial or biological process

DOEpatents

Gross, Kenneth C.; Wegerich, Stephan W.; Vilim, Rick B.; White, Andrew M.

1998-01-01

A method and apparatus for monitoring and responding to conditions of an industrial process. Industrial process signals, such as repetitive manufacturing, testing and operational machine signals, are generated by a system. Sensor signals characteristic of the process are generated over a time length and compared to reference signals over the time length. The industrial signals are adjusted over the time length relative to the reference signals, the phase shift of the industrial signals is optimized to the reference signals and the resulting signals output for analysis by systems such as SPRT.

System for monitoring an industrial or biological process

DOEpatents

Gross, K.C.; Wegerich, S.W.; Vilim, R.B.; White, A.M.

1998-06-30

A method and apparatus are disclosed for monitoring and responding to conditions of an industrial process. Industrial process signals, such as repetitive manufacturing, testing and operational machine signals, are generated by a system. Sensor signals characteristic of the process are generated over a time length and compared to reference signals over the time length. The industrial signals are adjusted over the time length relative to the reference signals, the phase shift of the industrial signals is optimized to the reference signals and the resulting signals output for analysis by systems such as SPRT. 49 figs.

Statistical characteristics of excess fiber length in loose tubes of optical cable

NASA Astrophysics Data System (ADS)

Andreev, Vladimir A.; Gavryushin, Sergey A.; Popov, Boris V.; Popov, Victor B.; Vazhdaev, Michael A.

2017-04-01

This paper presents an analysis of the data measurements of excess fiber length in the loose tubes of optical cable during the post-process quality control of ready-made products. At determining estimates of numerical characteristics of excess fiber length method of results processing of direct multiple equally accurate measurements has been used. The results of experimental research of the excess length value at the manufacturing technology of loose tube remains constant.

Study of Natural Fiber Breakage during Composite Processing

NASA Astrophysics Data System (ADS)

Quijano-Solis, Carlos Jafet

Biofiber-thermoplastic composites have gained considerable importance in the last century. To provide mechanical reinforcement to the polymer, fibers must be larger than a critical aspect ratio (length-to-width ratio). However, biofibers undergo breakage in length or width during processing, affecting their final aspect ratio in the composites. In this study, influence on biofiber breakage by factors related to processing conditions, fiber morphology and the flow type was investigated through: a) experiments using an internal mixer, a twin-screw extruder (TSE) or a capillary rheometer; and b) a Monte Carlo computer simulation. Composites of thermomechanical fibers of aspen or wheat straw mixed with polypropylene were studied. Internal mixer experiments analyzed wheat straw and two batches of aspen fibers, named AL and AS. AL fibers had longer average length. Processing variables included the temperature, rotors speed and fiber concentration. TSE experiments studied AL and AS fiber composites under various screws speeds, temperatures and feeding rates of the polymer and fibers. Capillary rheometers experiments determined AL fiber breakage in shear and elongational flows for composites processed at different concentrations, temperatures, and strain rates. Finally, the internal mixer experimental results where compared to Monte Carlo simulation predictions. The simulation focused on fiber length breakage due to fiber-polymer interactions. Internal mixer results showed that final fiber average length depended almost solely on processing conditions while final fiber average width depended on both processing conditions and initial fiber morphology. In the TSE, processing conditions as well as initial fiber length influenced final average length. TSE results showed that the fiber concentration regime seems to influence the effect of processing variables on fiber breakage. Capillary rheometer experiments demonstrated that biofiber breakage happens in both elongational and shear flows. In some cases, percentage of biofiber breakage in elongational flow is higher. In general, simulation predictions of final average lengths were in good agreement with experiments, indicating the importance of fiber-polymer interactions on fiber breakage. The largest discrepancies were obtained at higher fiber concentration composites; these differences might be resolved, in future simulations, by including the effect of fiber-fiber interactions.

L'effet des deformations plastiques severes sur les proprietes d'hydruration du magnesium

NASA Astrophysics Data System (ADS)

Lang, Julien

Le travail de recherche effectue durant mon projet de maitrise en physique a l'Universite du Quebec a Trois-Rivieres dans les laboratoires de l'Institut de Recherche sur l'Hydrogene etait de comparer l'effet du laminage a froid de la poudre de MgH2 avec celui du broyage mecanique. Nous avons etudie cette nouvelle technique en utilisant un laminoir vertical concu specialement pour laminer de la poudre. Nous avons lamine la poudre de MgH2 5, 25, 50 et 100 fois. La comparaison de la morphologie de la poudre de MgH 2 telle que recu du manufacturier et broye mecaniquement pendant 30 minutes avec celle de la poudre laminee ete faite a l'aide d'un microscope electronique a balayage. Nous avons par la suite mesure les proprietes de sorption d'hydrogene grace un appareil PCT de type Sievert. Nous avons aussi determine la structure cristalline par diffraction de rayons X. A partir de ces resultats, nous avons constate que le nombre optimal de laminages est de cinq et a les caracteristiques d'absorption/desorption d'hydrogene similaires a un broyage mecanique de 30 minutes. Nous avons aussi utilise les courbes de cinetiques d'absorption et de desorption d'hydrogene pour calculer l'etape limitative dans les reactions de sorption des echantillons lamines. Comme cinq laminages se font en environ 10 secondes, on voit que le laminage a froid est une technique plus interessante industriellement que le broyage mecanique a cause de l'important gain en temps et en energie.

Apport de la simulation numérique à la compréhension des mécanismes d'interaction de cavités dans le cadre de la modélisation de l'endommagement ductile sous sollicitation dynamique

NASA Astrophysics Data System (ADS)

Roy, G.; Buy, F.; Llorca, F.

2002-12-01

L'étude présentée s'inscrit dans le cadre d'une démarche menant à la construction d'un modèle analytique ou semi analytique de comportement élasto-visco-plastique endommageable, applicable aux chargements rencontrés en configuration d'impact violent et générant de l'écaillage ductile. La prise en compte des effets de compressibilité et de micro inertie est essentielle pour modéliser la phase de croissance. Des simulations numériques globales de la structure et locales à l'échelle des hétérogénéités permettent d'évaluer les niveaux de sollicitations dans les zones susceptibles de s'endommager, dévaluer des critères analytiques de germination de l'endommagement et de comprendre les mécanismes d'interaction entre les défauts. Les effets micro inertiels et de compressibilité sont ainsi mis en évidence dans les phases de germination et de coalescence des micro défauts. II s'agit ici d'une illustration non exhaustive de travaux engagés au CEA Valduc sur le tantale, dans le cadre d'une thèse [10]. Un programme matériaux en partenariat CEA-CNRS sur la modélisation multi échelles du comportement de structures a également été initié dans ce contexte.

Ex vivo accuracy of an apex locator using digital signal processing in primary teeth.

PubMed

Leonardo, Mário Roberto; da Silva, Lea Assed Bezerra; Nelson-Filho, Paulo; da Silva, Raquel Assed Bezerra; Lucisano, Marília Pacífico

2009-01-01

The purpose of this study was to evaluate ex vivo the accuracy an electronic apex locator during root canal length determination in primary molars. One calibrated examiner determined the root canal length in 15 primary molars (total=34 root canals) with different stages of root resorption. Root canal length was measured both visually with the placement of a K-file 1 mm short of the apical foramen or the apical resorption bevel, and electronically using an electronic apex locator (Digital Signal Processing). Data were analyzed statistically using the intraclass correlation (ICC) test. Comparing the actual and electronic root canal length measurements in the primary teeth showed a high correlation (ICC=0.95). The Digital Signal Processing apex locator is useful and accurate for apex foramen location during root canal length measurement in primary molars.

Neck linker length determines the degree of processivity in kinesin-1 and kinesin-2 motors.

PubMed

Shastry, Shankar; Hancock, William O

2010-05-25

Defining the mechanical and biochemical determinates of kinesin processivity is important for understanding how diverse kinesins are tuned for specific cellular functions. Because transmission of mechanical forces through the 14-18 amino acid neck linker domain underlies coordinated stepping, we investigated the role of neck linker length, charge, and structure in kinesin-1 and kinesin-2 motor behavior. For optimum comparison with kinesin-1, the KIF3A head and neck linker of kinesin-2 were fused to the kinesin-1 neck coil and rod. Extending the 14-residue kinesin-1 neck linker reduced processivity, and shortening the 17-residue kinesin-2 neck linker enhanced processivity. When a proline in the kinesin-2 neck linker was replaced, kinesin-1 and kinesin-2 run lengths scaled identically with neck linker length, despite moving at different speeds. In low-ionic-strength buffer, charge had a dominant effect on motor processivity, which resolves ongoing controversy regarding the effect of neck linker length on kinesin processivity. From stochastic simulations, the results are best explained by neck linker extension slowing strain-dependent detachment of the rear head along with diminishing strain-dependent inhibition of ATP binding. These results help delineate how interhead strain maximizes stepping and suggest that less processive kinesins are tuned to coordinate with other motors differently than the maximally processive kinesin-1. Copyright 2010 Elsevier Ltd. All rights reserved.

Effect of various digital processing algorithms on the measurement accuracy of endodontic file length.

PubMed

Kal, Betül Ilhan; Baksi, B Güniz; Dündar, Nesrin; Sen, Bilge Hakan

2007-02-01

The aim of this study was to compare the accuracy of endodontic file lengths after application of various image enhancement modalities. Endodontic files of three different ISO sizes were inserted in 20 single-rooted extracted permanent mandibular premolar teeth and standardized images were obtained. Original digital images were then enhanced using five processing algorithms. Six evaluators measured the length of each file on each image. The measurements from each processing algorithm and each file size were compared using repeated measures ANOVA and Bonferroni tests (P = 0.05). Paired t test was performed to compare the measurements with the true lengths of the files (P = 0.05). All of the processing algorithms provided significantly shorter measurements than the true length of each file size (P < 0.05). The threshold enhancement modality produced significantly higher mean error values (P < 0.05), while there was no significant difference among the other enhancement modalities (P > 0.05). Decrease in mean error value was observed with increasing file size (P < 0.05). Invert, contrast/brightness and edge enhancement algorithms may be recommended for accurate file length measurements when utilizing storage phosphor plates.

Evaluation d'une approche pedagogique respectant les facons d'apprendre des filles en sciences et en TIC en 9e annee au Nouveau-Brunswick

NASA Astrophysics Data System (ADS)

Lirette-Pitre, Nicole T.

2009-07-01

La reussite scolaire des filles les amene de plus en plus a poursuivre une formation postsecondaire et a exercer des professions qui demandent un haut niveau de connaissances et d'expertise scientifique. Toutefois, les filles demeurent toujours tres peu nombreuses a envisager une carriere en sciences (chimie et physique), en ingenierie ou en TIC (technologie d'information et de la communication), soit une carriere reliee a la nouvelle economie. Pour plusieurs filles, les sciences et les TIC ne sont pas des matieres scolaires qu'elles trouvent interessantes meme si elles y reussissent tres bien. Ces filles admettent que leurs experiences d'apprentissage en sciences et en TIC ne leur ont pas permis de developper un interet ni de se sentir confiante en leurs habiletes a reussir dans ces matieres. Par consequent, peu de filles choisissent de poursuivre leurs etudes postsecondaires dans ces disciplines. La theorie sociocognitive du choix carriere a ete choisie comme modele theorique pour mieux comprendre quelles variables entrent en jeu lorsque les filles choisissent leur carriere. Notre etude a pour objet la conception et l'evaluation de l'efficacite d'un materiel pedagogique concu specifiquement pour ameliorer les experiences d'apprentissage en sciences et en TIC des filles de 9e annee au Nouveau-Brunswick. L'approche pedagogique privilegiee dans notre materiel a mis en oeuvre des strategies pedagogiques issues des meilleures pratiques que nous avons identifiees et qui visaient particulierement l'augmentation du sentiment d'auto-efficacite et de l'interet des filles pour ces disciplines. Ce materiel disponible par Internet a l'adresse http://www.umoncton.ca/lirettn/scientic est directement en lien avec le programme d'etudes en sciences de la nature de 9e annee du Nouveau-Brunswick. L'evaluation de l'efficacite de notre materiel pedagogique a ete faite selon deux grandes etapes methodologiques: 1) l'evaluation de l'utilisabilite et de la convivialite du materiel et 2) l'evaluation de l'effet du materiel en fonction de diverses variables reliees a l'interet et au sentiment d'auto-efficacite des filles en sciences et en TIC. Cette recherche s'est inscrite dans un paradigme pragmatique de recherche. Le pragmatisme a guide nos choix en ce qui a trait au modele de recherche et des techniques utilisees. Cette recherche a associe a la fois des techniques qualitatives et quantitatives, particulierement en ce qui concerne la collecte et l'analyse de donnees. Les donnees recueillies dans la premiere etape de l'evaluation de l'utilisabilite et de la convivialite du materiel par les enseignantes et les enseignants de sciences et les filles ont revele que le materiel concu est tres utilisable et convivial. Toutefois quelques petites ameliorations seront apportees a une version subsequente afin de faciliter davantage la navigation. Quant a l'evaluation des effets du materiel concu sur les variables reliees au sentiment d'auto-efficacite et aux interets lors de l'etape quasi experimentale, nos donnees qualitatives ont indique que ce materiel a eu des effets positifs sur le sentiment d'auto-efficacite et sur les interets des filles qui l'ont utilise. Toutefois, nos donnees quantitatives n'ont pas permis d'inferer un lien causal direct entre l'utilisation du materiel et l'augmentation du sentiment d'auto-efficacite et des interets des filles en sciences et en TIC. A la lumiere des resultats obtenus, nous avons conclu que le materiel a eu les effets escomptes. Donc, nous recommandons la creation et l'utilisation de materiel de ce genre dans toutes les classes de sciences de la 6e annee a la 12e annee au Nouveau-Brunswick.

Hydrodynamic Coating of a Fiber

NASA Astrophysics Data System (ADS)

Quéré, D.; de Ryck, A.

We discuss how a solid (especially a fiber) is coated when drawn out of a bath of liquid. 1. For slow withdrawals out of pure viscous liquids, the data are found to be fitted by the famous Landau law: then, the coating results from a balance between viscosity and capillarity. For quicker withdrawals, the thickness of the entrained film suddenly diverges, at a velocity on order 1 m/s. Inertia is shown to be responsible for this effect. At still higher velocities, the thickness decreases with the velocity because the solid can only entrain the viscous boundary layer. 2. For complex fluids, surface effects are found in the low velocity regime: out of a surfactant solution, films are thicker than predicted by Landau, by a factor of order 2. The thickening factor is shown to be fixed by the Marangoni flow due to the presence of surfactants; out of an emulsion, the film can be enriched with oil , which can be understood by a simple model of capture; out of a polymer solution, a strong swelling of the film is observed if normal stresses are present. Hence, the problem has two families of solution: (i) at low velocity, the thickness of the layer is fixed by a balance between viscous and surface forces and thus is sensitive to the presence of surfactants, or other heterogeneities; (ii) at high velocity, inertia must be considered and the film thickness is fixed by the bulk properties of the liquid (density and viscosity). In these regimes, it is not affected by the presence of surfactants in the bath. Nous décrivons le dépôt de liquide sur un solide (le plus souvent une fibre) qui advient quand on tire ce solide d'un bain. 1. Si le retrait se fait lentement hors d'un liquide pur et visqueux, les données expérimentales suivent la loi de Landau : le dépôt résulte d'un compromis entre forces visqueuses et forces capillaires. Pour des retraits plus rapides, on observe que l'épaisseur du dépôt diverge, pour une vitesse de l'ordre du mètre par seconde. Nous montrons comment l'inertie du fluide engendre un tel effet. Plus vite encore, l'épaisseur décroît lentement avec la vitesse, le solide ne parvenant à entraîner avec lui que la couche limite visqueuse qu'il a mis en mouvement. 2. Pour des liquides complexes, des effets de surface sont observés dans le régime basse vitesse : hors d'une solution de tensioactifs, les films sont plus épais que ce que prévoit la loi de Landau, d'un facteur 2 environ. Nous montrons que l'épaississement est déterminé par l'écoulement Marangoni dû à la présence des tensioactifs ; hors d'une émulsion, le film peut être enrichi en huile, ce que l'on peut interpréter à l'aide d'un modèle de capture ; hors d'une solution de polymère, on observe un fort gonflement du film dès que la solution est semi-diluée, à cause de l'effet des contraintes normales (effet Weissenberg). Le problème étudié a donc deux familles de solution : (i) à basse vitesse, le dépôt résulte d'un compromis entre viscosité et capillarité, si bien qu'il est sensible à la présence dans le bain d'hétérogénéités (tensioactifs, gouttes d'huile) ; (ii) à plus grande vitesse, l'inertie doit être prise en compte et l'épaisseur du film est alors liée aux propriétés de volume du liquide (densité et viscosité).

Automatic Control Of Length Of Welding Arc

NASA Technical Reports Server (NTRS)

Iceland, William F.

1991-01-01

Nonlinear relationships among current, voltage, and length stored in electronic memory. Conceptual microprocessor-based control subsystem maintains constant length of welding arc in gas/tungsten arc-welding system, even when welding current varied. Uses feedback of current and voltage from welding arc. Directs motor to set position of torch according to previously measured relationships among current, voltage, and length of arc. Signal paths marked "calibration" or "welding" used during those processes only. Other signal paths used during both processes. Control subsystem added to existing manual or automatic welding system equipped with automatic voltage control.

Review of National Work Programme on the Long Term Effects of Sustained High G on the Cervical Spine (Analyse du programme de travail national : les effets long terme sur la colonne cervicale d’un nombre de G lev et prolong )

DTIC Science & Technology

2008-12-01

Prof. Karin Harms-Ringdahl, PhD, RPT Karolinska Institutet Department of Neurobiology, Care Sciences, and Society Division of Physiotherapy 23100...Äng Karolinska Institutet Department of Neurobiology, Care Sciences, and Society Division of Physiotherapy Alfred Nobels Allé 23100 SE-14183...report is in preparation. The RAF has an ongoing project (from August 2006 to September 2007) determining the need for physiotherapy for aircrew on the

Specialists Meeting on Wing-with-Stores Flutter

DTIC Science & Technology

1975-04-01

I, 150 -z20L0 250 00 350o PYLON COMPONENT MODE (PITCH4-) GENER~ALISED INERTIA A C, 2-20 FIG. 13. AIRCRAFT BENDING MODE FREQUENCI ES , FOR SfORES ON...ldgbre ddportance tandis Gus J ’effet inverse eut o’uorv6 pour ] es sections au- .elth du rdscteur. Calcul et exp~rionce oont v,-. lw. accord at...nontrent que i’interaction du r’~acteur sur i.aile eat trbs locale ot d’intensitC6 s;.ffismaaent faible pour pouvoir 6trc n~glii4e dana lea calculs do

Energy Security in Yemen

DTIC Science & Technology

2009-09-01

le présent rapport, nous analysons la sécurité du secteur énergétique et de son infrastructure au Yémen et nous examinons les répercussions...conflits. Toutefois, le problème fondamental du secteur de l‘énergie au Yémen est l‘épuisement des réserves pétrolières, menant à une réduction rapide des...niveaux de production de pétrole. Le déclin du secteur de l‘énergie dans ce pays aura un effet très négligeable sur les réserves énergétiques

Conference Proceedings on Effects of Adverse Weather on Aerodynamics Held in Toulouse, France on 29 April-1 May 1991 (Les Effets des Conditions Meteorologiques Adverses sur l’Aerodynamique)

DTIC Science & Technology

1991-12-01

and a refrigeration system and of a large, free jet wind tunnel. A schematic of the facil- heat exchanger that cools the air to temperatures as low ity...rotor testing turers, but correlations for heat and mass transfer over would involve the use of simulated ice applied to the wet airfoil surfaces are not...and also has incidence. A transient heat conduction the ability to introduce a correction for analysis applied around the rotor azimuth viscous effects

The Effect of Prolonged Military Activities in Man. Physiological and Biochemical Changes. Possible Means of Rapid Recuperation (les Effets d’activites mi1itaires prolongees sur l’homme. Changements physiologiques et biochimiques. Moyens possibles de recuperation rapide.)

DTIC Science & Technology

2001-03-01

possibilities to treat many groups in a repeated analysis the parametric methods were preferred. Student’s t-test has been used to identify significant...activation of the adrenal cortical glands and could therefore use the central POMC- serotonin pathway. This effect is observed in moderately trained...their unusual hours of arrival and departure deserves more study. It would be useful to know what selections they have and what they are making

Validation of an Acoustic Head Simulator for the Evaluation of Personal Hearing Protection Devices

DTIC Science & Technology

2004-11-01

et recouvert de peau artificielle. Les cavités de chaque côté permettent l’insertion de modules d’oreilles qui reproduisent les mécanismes des ...aux spécifications publiées. Ces différences n’ont pas influé sur la perte d’insertion. Après correction pour tenir compte des effets de la...un simulateur de tête époxy chargé d’aluminium et recouvert de peau artificielle. La tête est soutenue par un module de cou souple rattaché à un

Intellectual Property Rights: Lecture Series Held in London, (United Kingdom) on 21-22 October 1991, in Brussels (Belgium) on 24-25 October 1991 and in Arlington, Virginia on 6-7 November 1991

DTIC Science & Technology

1991-01-01

des rdalitfs diverses ct niouvantes sous I’cffet croisd des 6volutions techniques et &conomIques. I en rdsulte tine...r6le est croissant. Si un tel mouvement s’observe dans nombre de pays, cla ne signifie pas qu’il leur soit commun. En effet, la confrontation des ...conceptions nationales, voire rgionales, est dIdj engagdc en raison de l’internationalisation des activitds de transfert de technologies et de

Isotope effect in the organic superconductor β_H-(BEDT-TTF)2I3 where BEDT-TTF is bis (ethylenedithiotetrathiafulvalene)

NASA Astrophysics Data System (ADS)

Auban-Senzier, P.; Bourbonnais, C.; Jérome, D.; Lenoir, C.; Batail, P.; Canadell, E.; Buisson, J. P.; Lefrant, S.

1993-03-01

We have performed the simultaneous investigation of the isotope effect on the superconducting transition and on the Raman spectra in the organic superconductor β_H-(BEDT-TTF)2I3 (T_c = 8 K). For this purpose, we substitute ^{13}C for ^{12}C on the carbon sites of the central double bond of BEDT-TTF molecule. The isotope shifts measured by Raman experiments can be fairly well explained by standard molecular dynamics. However, the critical temperature is lowered by 0.2 K in the ^{13}C enriched material. We analyse the possible sources of this remarkable downward shift which leads to an isotope coefficient higher than the BCS value. The extended-Hückel calculations of the density of states for the two HOMO bands of β_H-(BEDT-TTF)2I3 do show that, within the framework of a weak coupling theory, its sizeable variation on the scale of ω_D cannot account for the observed isotope effect. On the other hand, we discuss how inelastic electronic scattering observed in resistivity measurements just above T_c can lead through a pair breaking mechanism to a sizeable increase of the isotope coefficient. Nous présentons une étude simultanée d'effet isotopique sur la transition supraconductrice et les spectres Raman dans le supraconducteur organique β_H-(BEDT-TTF)2I3 (T_c = 8 K). Pour cela, nous avons synthétisé le composé dans lequel les atomes de carbone de la double liaison centrale de la molécule BEDT-TTF sont substitués par l'isotope ^{13}C. Les déplacements isotopiques mesurés par spectroscopie Raman sont bien expliqués par la dynamique moléculaire standard. Cependant, la température critique est abaissée de 0.2 K dans le matériau enrichi en ^{13}C. Nous étudions les origines possibles de cet effet qui permet d'obtenir un coefficient isotopique supérieur à la valeur BCS. Des calculs de la densité d'états effectués par la méthode de Hückel étendue pour les deux bandes HOMO du composé montrent que, dans le cadre d'une théorie de couplage faible, son importante variation à l'échelle de ω_D ne peut expliquer l'effet observé. D'autre part, nous expliquons comment la diffusion électronique inélastique observée en résistivité juste au-dessus de T_c peut conduire via un mécanisme de brisure de paires, à une augmentation significative du coefficient isotopique.

Les recommandations thérapeutiques relatives aux effets secondaires extrapyramidaux associés à l’utilisation d’antipsychotiques de deuxième génération chez les enfants et les adolescents

PubMed Central

Pringsheim, Tamara; Doja, Asif; Belanger, Stacey; Patten, Scott

2012-01-01

HISTORIQUE ET OBJECTIF : L’utilisation d’antipsychotiques augmente chez les enfants. Le présent article visait à orienter les cliniciens quant à la prise en charge clinique des effets secondaires extrapyramidaux des antipsychotiques de deuxième génération. MÉTHODOLOGIE : Les publications, les entrevues avec des informateurs clés et des échanges avec les membres d’un groupe de discussion et les partenaires ont permis de déterminer les principaux secteurs cliniques d’orientation et les préférences quant à la structure des présentes recommandations. Les membres responsables des lignes directrices ont reçu le projet de recommandations, ont évalué l’information recueillie grâce à une analyse bibliographique systématique et ont utilisé un processus de groupe nominal pour parvenir à un consensus quant aux recommandations thérapeutiques. Les lignes directrices contiennent une description des anomalies neurologiques souvent observées avec l’utilisation d’antipsychotiques ainsi que les recommandations sur le moyen d’examiner et de quantifier ces anomalies. Une démarche séquentielle sur la prise en charge des anomalies neurologiques est présentée. RÉSULTATS : On peut observer plusieurs types de symptômes extrapyramidaux attribuables à l’utilisation d’antipsychotiques chez les enfants, y compris la dystonie aiguë, l’akathisie, le parkinsonisme et la dyskinésie tardive, toutes induites par les neuroleptiques, de même que la dystonie tardive, l’akathisie tardive et les dyskinésies de sevrage. La forte majorité des données probantes sur le traitement des troubles du mouvement induits par les antipsychotiques proviennent de patients adultes atteints de schizophrénie. Étant donné le peu de données pédiatriques, les recommandations découlent de publications portant tant sur des adultes que sur des enfants. Compte tenu des limites de généralisation des données provenant de sujets adultes pour des enfants, il faudrait évaluer ces recommandations d’après les avis d’experts plutôt que d’après les données probantes. CONCLUSION : Les cliniciens doivent savoir que les antipsychotiques de deuxième génération ont le potentiel d’induire des effets secondaires neurologiques et devraient faire preuve d’une extrême vigilance lorsqu’ils en prescrivent. PMID:24082814

Apport maternel chez la balane tropicale : Plasticite de l'allocation de la ressource trophique pour la production larvaire en conditions de limitation nutritionnelle et de stress environnemental

NASA Astrophysics Data System (ADS)

Freuchet, Florian

Dans le milieu marin, l'abondance du recrutement depend des processus qui vont affecter les adultes et le stock de larves. Sous l'influence de signaux fiables de la qualite de l'habitat, la mere peut augmenter (effet maternel anticipatoire, 'anticipatory mother effects', AME) ou reduire (effet maternel egoiste, 'selfish maternai effects', SME) la condition physiologique de la progeniture. Dans les zones tropicales, generalement plus oligotrophes, la ressource nutritive et la temperature sont deux composantes importantes pouvant limiter le recrutement. Les effets de l'apport nutritionnel et du stress thermique sur la production de larves et sur la stategie maternelle adoptee ont ete testes dans cette etude. Nous avons cible la balane Chthamalus bisinuatus (Pilsbry) comme modele biologique car el1e domine les zones intertidales superieures le long des cotes rocheuses du Sud-Est du Bresil (region tropicale). Les hypotheses de depart stipulaient que l'apport nutritionnel permet aux adultes de produire des larves de qualite elevee et que le stress thermique genere une ponte precoce, produisant des larves de faible qualite. Afin de tester ces hypotheses, des populations de C. bisinuatus ont ete elevees selon quatre groupes experimentaux differents, en combinant des niveaux d'apport nutritionnel (eleve et faible) et de stress thermique (stresse et non stresse). Des mesures de survie et de conditions physiologiques des adultes et des larves ont permis d'identifier les reponses parentales pouvant etre avantageuses dans un environnement tropical hostile. L'analyse des profils en acides gras a ete la methode utilisee pour evaluer la qualite physiologique des adultes et de larves. Les resultats du traitement alimentaire (fort ou faible apport nutritif), ne montrent aucune difference dans l'accumulation de lipides neutres, la taille des nauplii, l'effort de reproduction ou le temps de survie des nauplii en condition de jeune. Il semble que la faible ressource nutritive est compensee par les meres qui adoptent un modele AME qui se traduit par l'anticipation du milieu par les meres afin de produire des larves au phenotype approprie. A l'ajout d'un stress thermique, on observe des diminutions de 47% de la production de larves et celles-ci etaient 18 microm plus petites. Les meres semblent utiliser un modele SME caracterise par une diminution de la performance des larves. Suite a ces resultats, nous emettons l'hypothese qu'en zone subtropicale, comme sur les cotes de l'etat de Sao Paulo, l'elevation de la temperature subie par les balanes n'est, a priori, pas dommageable pour leur organisme si eIle est combinee a un apport nutritif suffisant.

Developpement d'outils quantitatifs pour le suivi par imagerie TEP/TDM de la reponse a la chimiotherapie et de sa toxicite

NASA Astrophysics Data System (ADS)

Croteau, Etienne

L'objectif de ce projet de doctorat est de developper des outils quantitatifs pour le suivi des traitements de chimiotherapie pour le cancer du sein et de leurs effets cardiotoxiques a l'aide de l'imagerie TEP dynamique. L'analyse cinetique en TEP dynamique permet l'evaluation de parametres biologiques in vivo. Cette analyse peut etre utilise pour caracteriser la reponse tumorale a la chimiotherapie et les effets secondaires nefastes qui peuvent en resulter. Le premier article de cette these decrit la mise au point des techniques d'analyse cinetique qui utilisent la fonction d'entree d'un radiotraceur derive de l'image dynamique. Des corrections de contamination radioactive externe (epanchement) et de l'effet de volume partiel ont ete necessaires pour standardiser l'analyse cinetique et la rendre quantitative. Le deuxieme article porte sur l'evaluation d'un nouveau radiotraceur myocardique. Le 11C-acetoacetate, un nouveau radiotraceur base sur un corps cetonique, a ete compare au 11C-acetate, couramment utilise en imagerie cardiaque TEP. L'utilisation de 3H-acetate et 14C-acetoacetate ont permis d'elucider la cinetique de ces traceurs depuis la fonction d'entree et la captation par les mitochondries cardiaques qui reflete la consommation en oxygene, jusqu'a la liberation de leurs principaux metabolites reciproques (3H20 et 14CO2). Le troisieme et dernier article de cette these presente l'integration d'un modele qui evalue la reserve cardiaque de perfusion et de consommation en oxygene. Un modele de cardiomyopathie a ete etabli a l'aide d'un agent chimiotherapeutique contre le cancer du sein, la doxorubicine, reconnu comme etant cardiotoxique. Un protocole de repos/effort a permis d'evaluer la capacite d'augmentation de perfusion et de consommation en oxygene par le coeur. La demonstration d'une reserve cardiaque reduite caracterise la cardiotoxicite. La derniere contribution de cette these porte sur la mise au point de methodes peu invasives pour mesurer la fonction d'entree en modele animal avec l'utilisation de l'artere caudale et un compteur microvolumetrique, la bi-modalite TEP/IRM dynamique avec le Gd-DTPA et l'etablissement d'un modele d'evaluation simultane de cardiotoxicite et reponse tumorale chez la souris. Le developpement d'outils d'analyse TEP dans l'evaluation de la cardiotoxicite lors de traitements du canter du sein permet de mieux comprendre la relation entre les dommages mitochondriaux et la diminution de la fraction d'ejection. Mots cles : Tomographie d'emission par positrons (TEP), analyses cinetiques, IIC-acetate, 11Cacetoacetate, cardiotoxicite.

High-performance liquid chromatography purification of homogenous-length RNA produced by trans cleavage with a hammerhead ribozyme.

PubMed Central

Shields, T P; Mollova, E; Ste Marie, L; Hansen, M R; Pardi, A

1999-01-01

An improved method is presented for the preparation of milligram quantities of homogenous-length RNAs suitable for nuclear magnetic resonance or X-ray crystallographic structural studies. Heterogeneous-length RNA transcripts are processed with a hammerhead ribozyme to yield homogenous-length products that are then readily purified by anion exchange high-performance liquid chromatography. This procedure eliminates the need for denaturing polyacrylamide gel electrophoresis, which is the most laborious step in the standard procedure for large-scale production of RNA by in vitro transcription. The hammerhead processing of the heterogeneous-length RNA transcripts also substantially improves the overall yield and purity of the desired RNA product. PMID:10496226

Study on length distribution of ramie fibers

USDA-ARS?s Scientific Manuscript database

The extra-long length of ramie fibers and the high variation in fiber length has a negative impact on the spinning processes. In order to better study the feature of ramie fiber length, in this research, the probability density function of the mixture model applied in the characterization of cotton...

Microglial pathology.

PubMed

Streit, Wolfgang J; Xue, Qing-Shan; Tischer, Jasmin; Bechmann, Ingo

2014-09-26

This paper summarizes pathological changes that affect microglial cells in the human brain during aging and in aging-related neurodegenerative diseases, primarily Alzheimer's disease (AD). It also provides examples of microglial changes that have been observed in laboratory animals during aging and in some experimentally induced lesions and disease models. Dissimilarities and similarities between humans and rodents are discussed in an attempt to generate a current understanding of microglial pathology and its significance during aging and in the pathogenesis of Alzheimer dementia (AD). The identification of dystrophic (senescent) microglia has created an ostensible conflict with prior work claiming a role for activated microglia and neuroinflammation during normal aging and in AD, and this has raised a basic question: does the brain's immune system become hyperactive (inflamed) or does it become weakened (senescent) in elderly and demented people, and what is the impact on neuronal function and cognition? Here we strive to reconcile these seemingly contradictory notions by arguing that both low-grade neuroinflammation and microglial senescence are the result of aging-associated free radical injury. Both processes are damaging for microglia as they synergistically exhaust this essential cell population to the point where the brain's immune system is effete and unable to support neuronal function.

"Metamagnetoelectric" effect in multiferroics

NASA Astrophysics Data System (ADS)

Fouokeng, G. C.; Fodouop, F. Kuate; Tchoffo, M.; Fai, L. C.; Randrianantoandro, N.

2018-05-01

We present a theoretical calculation of magnetoelectric properties in a quasi-two dimensional spin chain externally controlled by a static electric field in y-direction and magnetic field in z-direction. Given the diversity of properties in functional materials and their applications in physics, the multiferroic model is investigated. By using the Fermi-Dirac statistics of quantum gases and the Landau theory, we assess the effects of the Dzyaloshinskii-Moriya interaction and the electric polarization on the magnetoelectric coupling that induces at low temperature the "metamagnetoelectric" effet, and likewise affects the ferroelectricity induced through symmetry mechanisms and magnetic properties of the multiferroic system. In fact, the variation of the induced polarisation due to spin arrangement through the Dzyaloshinskii-Moriya interaction gives rise to a multistep interdependent metamagnetic and metaelectric transitions which are settled up by the corresponding Dzyaloshinskii-Moriya parameter and the system then exhibits a spin gap that results from an electric and a magnetic demagnetization field range. This metamagnetoelectric effect observed in these multiferroic materials model is seem to be highly tunable via the external electric and magnetic fields and thus can be crucial in the design of new mechanisms for the processing and storage of data and other spintronic applications.

Strategies facilitant les tests en pre-certification pour la robustesse a l'egard des radiations =

NASA Astrophysics Data System (ADS)

Souari, Anis

Les effets des radiations cosmiques sur l'electronique embarquee preoccupent depuis. quelques decennies les chercheurs interesses par la robustesse des circuits integres. Plusieurs. recherches ont ete menees dans cette direction, principalement pour les applications spatiales. ou l’environnement de leur deploiement est hostile. En effet, ces environnements sont denses. en termes de particules qui, lorsqu’elles interagissent avec les circuits integres, peuvent. mener a leur dysfonctionnement, voir meme a leur destruction. De plus, les effets des. radiations s’accentuent pour les nouvelles generations des circuits integres ou la diminution. de la taille des transistors et l’augmentation de la complexite de ces circuits augmentent la. probabilite d’apparition des anomalies et par consequence la croissance des besoins de test. L’expansion de l’electronique grand public (commercial off-the-shelf, COTS) et l’adoption. de ces composants pour des applications critiques comme les applications avioniques et. spatiales incitent egalement les chercheurs a doubler les efforts de verification de la fiabilite. de ces circuits. Les COTS, malgre leurs meilleures caracteristiques en comparaison avec les. circuits durcis tolerants aux radiations qui sont couteux et en retard en termes de technologie. utilisee, sont vulnerables aux radiations. Afin d’ameliorer la fiabilite de ces circuits, une evaluation de leur vulnerabilite dans les. differents niveaux d’abstraction du flot de conception est recommandee. Ceci aide les. concepteurs a prendre les mesures de mitigation necessaires sur le design au niveau. d’abstraction en question. Enfin, afin de satisfaire les exigences de tolerance aux pannes, des. tests tres couteux de certification, obtenus a l’aide de bombardement de particules (protons, neutrons, etc.), sont necessaires. Dans cette these, nous nous interessons principalement a definir une strategie de precertification. permettant d’evaluer d’une facon realiste la sensibilite des circuits integres face. aux effets des radiations afin d’eviter d’envoyer des circuits non robustes a la phase tres. couteuse de la certification. Les circuits cibles par nos travaux sont les circuits integres. programmables par l’usager (FPGA) a base de memoire SRAM et le type de pannes ciblees, causees par les radiations, est les SEU (single event upset) consistant a un basculement de. l’etat logique d’un element de memoire a son complementaire. En effet, les FPGA a base de. memoire SRAM sont de plus en plus demandes par la communaute de l’aerospatial grace a. leurs caracteristiques de prototypage rapide et de reconfiguration sur site mais ils sont. vulnerables face aux radiations ou les SEU sont les pannes les plus frequentes dans les. elements de memoire de type SRAM. Nous proposons une nouvelle approche d’injection de. pannes par emulation permettant de mimer les effets des radiations sur la memoire de. configuration des FPGA et de generer des resultats les plus fideles possibles des resultats des. tests de certification. Cette approche est basee sur la consideration de la difference de. sensibilite des elements de memoire de configuration lorsqu’ils sont a l’etat '1' et a l’etat '0', observee sous des tests acceleres sous faisceaux de protons au renomme laboratoire. TRIUMF, dans la procedure de generation des sequences de test dans le but de mimer la. distribution des pannes dans la memoire de configuration. Les resultats des experimentations. de validation montrent que la strategie proposee est efficace et genere des resultats realistes. Ces resultats revelent que ne pas considerer la difference de sensibilite peut mener a une. sous-estimation de la sensibilite des circuits face aux radiations. Dans la meme optique d’optimisation de la procedure d’injection des pannes par emulation, a. savoir le test de pre-certification, nous proposons une methodologie permettant de maximiser. la detection des bits critiques (bits provoquant une defaillance fonctionnelle s’ils changent. d’etat) pour un nombre bien determine de SEU (qui est le modele de pannes adopte) ou de. maximiser la precision de l’estimation de nombre des bits critiques. Pour ce faire, une. classification des bits de configuration en differents ensembles est tout d’abord mise en. oeuvre, selon leur contenu, les ressources qu’ils configurent et leur criticite. Ensuite, une. evaluation de la sensibilite de chaque ensemble est accomplie. Enfin, la priorisation. d’injection des pannes dans les ensembles les plus sensibles est recommandee. Plusieurs. scenarios d’optimisation d’injection des pannes sont proposes et les resultats sont compares. avec ceux donnes par la methode conventionnelle d’injection aleatoire des pannes. La. methodologie d’optimisation proposee assure une amelioration de plus de deux ordres de. grandeur. Une derniere approche facilitant l’evaluation de la sensibilite des bits configurant les LUT. (look up table) de FPGA, les plus petites entites configurables du FPGA permettant. d’implementer des fonctions combinatoires, utilises par un design est presentee. Elle permet. l’identification facile et sans cout en termes d’utilisation du materiel ou d’outils externes des. bits des LUT. L’approche proposee est simple et efficace, offrant une couverture de pannes. de 100 % et applicable aux nouvelles generations des FPGA de Xilinx. Les approches proposees contribuent a repondre aux exigences du cahier des charges de cette. these et a achever les objectifs definis. Le realisme et la maximisation de l’estimation de la. vulnerabilite des circuits sous test offerts par les nouvelles approches assurent le. developpement d’une strategie de test en pre-certification efficace. En effet, la premiere. approche d’injection de pannes considerant la difference de sensibilite relative des elements. de memoire selon leur contenu genere des resultats donnant une erreur relative atteignant. 3.1 % quand compares aux resultats obtenus a TRIUMF alors que l’erreur relative donnee. par la comparaison des resultats d’une injection conventionnelle aleatoire de pannes avec. ceux de TRIUMF peut atteindre la valeur de 75 %. De plus, l’application de cette approche a. des circuits plus conventionnels montre que 2.3 fois plus d’erreurs sont detectees en. comparaison avec l’injection aleatoire des pannes. Ceci suggere que ne pas considerer la. difference de sensibilite relative dans la procedure d’emulation peut mener a une sousestimation. de la sensibilite du design face aux radiations. Les resultats de la deuxieme. approche proposee ont ete aussi compares aux resultats d’une injection aleatoire de pannes. L’approche proposee, maximisant le nombre des bits critiques inverses, permet d’atteindre. un facteur d’acceleration de 108 de la procedure d’injection des pannes en comparaison a. l’approche aleatoire. Elle permet aussi de minimiser l’erreur d’estimation du nombre des bits. critiques pour atteindre une valeur de ±1.1 % calculee pour un intervalle de confiance de. 95 % tandis que la valeur d’erreur d’estimation des bits critiques generee par l’approche. aleatoire d’injection des pannes pour le meme intervalle de confiance peut atteindre ±8.6 %. Enfin, la derniere approche proposee d’injection de pannes dans les LUT se distingue des. autres approches disponibles dans la litterature par sa simplicite tout en assurant une. couverture maximale de pannes de 100 %. En effet, l’approche proposee est independante. des outils externes permettant d’identifier les bits configurant les LUT qui sont obsoletes ou. ne supportent pas les nouvelles generations des FPGA. Elle agit directement sur les fichiers. generes par l’outil de synthese adopte.

Measurement of the Carbon Isotopic Composition of Methane Using Helicoidal Laser Eigenstates

NASA Astrophysics Data System (ADS)

Jacob, D.; Le Floch, A.; Bretenaker, F.; Guenot, P.

1996-06-01

The spatially generalized Jones matrix formalism is used to design a laser cavity to make intracavity measurements of the carbon isotopic composition of methane. the method is based on a double optical lever effect for helicoidally polarized eigenstates, permitting to measure successively the ^{12}CH_4 and ^{13}CH_4 concentrations. To choose the probed isotope, one simply tunes the frequency of the laser by Zeeman effect. The experiment exhibits a good agreement with the predictions and permits to measure the ^{13}CH4/^{12}CH_4 composition ratio of methane with an uncertainty of the order of ± 0.07% for a sample containing only 6× 10^{-9} mole of methane. On utilise le formalisme des matrices de Jones généralisées spatialement pour concevoir une cavité laser permettant la mesure intra-cavité de la composition isotopique du carbone présent dans le méthane. La méthode est fondée sur une double application de l'effet de levier optique pour les états propres hélicoïdaux, permettant de mesurer successivement les concentrations de ^{12}CH_4 et de ^{13}CH_4. Pour passer d'un isotope à l'autre, on ajuste simplement la fréquence du laser par effet Zeeman. L'expérience est en bon accord avec les prédictions et permet d'effectuer la mesure du rapport isotopique ^{13}CH4/^{12}CH_4 avec une fourchette d'incertitude de ± 0,07% pour des échantillons de gaz ne contenant que 6× 10^{-9} mole de méthane.

Propriétés électriques d'hétérostructures a-GaAs/c-GaAs(n) et de structures de type MIS a-GaAsN/c-GaAs(n)

NASA Astrophysics Data System (ADS)

Aguir, K.; Fennouh, A.; Carchano, H.; Lollman, D.

1995-10-01

Heterojunctions were fabricated by deposit of amorphous GaAs and GaAsN on c-GaAs. I(V) and C(V) measurements were performed to determine electrical properties of these structures. The a-GaAs/c-GaAs(n) heterojunctions present a p-n junction like behaviour. The characteristics of the a-GaAsN/c-GaAs(n) heterojunctions present a MIS like structure behaviour with some imperfections. A fixed positive charge was detected and a density of interface states of about 10^{11} eV^{-1}cm^{-2} was evaluated. L'étude porte sur des couches minces de GaAs et de GaAsN amorphes déposées par pulvérisation cathodique RF réactive sur des substrats de GaAs cristallin. Les caractéristiques électriques I(V) et C(V) ont été mesurées. Les hétérojonctions a-GaAs/c-GaAs(n) présentent un effet redresseur. Cet effet laisse place à une caractéristique symétrique avec une forte atténuation de l'intensité du courant pour les structures a-GaAsN/cGaAs(n). Les structures réalisées ont alors un comportement semblable à celui d'une structure MIS imparfaite. L'existence d'une charge positive fixe dans le a-GaAsN a été mise en évidence. La densité des états d'interface au milieu de la bande interdite est évaluée à quelques 10^{11} cm^{-2}eV^{-1}.

Linear and Non-Linear Piezoresistance Coefficients in Cubic Semiconductors. I. Theoretical Formulations

NASA Astrophysics Data System (ADS)

Durand, S.; Tellier, C. R.

1996-02-01

This paper constitutes the first part of a work devoted to applications of piezoresistance effects in germanium and silicon semiconductors. In this part, emphasis is placed on a formal explanation of non-linear effects. We propose a brief phenomenological description based on the multi-valleys model of semiconductors before to adopt a macroscopic tensorial model from which general analytical expressions for primed non-linear piezoresistance coefficients are derived. Graphical representations of linear and non-linear piezoresistance coefficients allows us to characterize the influence of the two angles of cut and of directions of alignment. The second part will primarily deal with specific applications for piezoresistive sensors. Cette publication constitue la première partie d'un travail consacré aux applications des effets piézorésistifs dans les semiconducteurs germanium et silicium. Cette partie traite essentiellement de la modélisation des effets non-linéaires. Après une description phénoménologique à partir du modèle de bande des semiconducteurs nous développons un modèle tensoriel macroscopique et nous proposons des équations générales analytiques exprimant les coefficients piézorésistifs non-linéaires dans des repères tournés. Des représentations graphiques des variations des coefficients piézorésistifs linéaires et non-linéaires permettent une pré-caractérisation de l'influence des angles de coupes et des directions d'alignement avant l'étude d'applications spécifiques qui feront l'objet de la deuxième partie.

Analyse de l'effet des courants induits sur l'impédance d'un système électromagnétique alimenté en tension BF ou HF. Utilisation de la méthode des circuits couplés

NASA Astrophysics Data System (ADS)

Maouche, B.; Feliachi, M.

1997-10-01

In this paper, a study of the interaction between the inductor and the load of an axisymmetrical induction device is proposed. This interaction concerns the effect of the eddy current on both the excitation current and on the system impedance. A half analytical model, based on a numerical discretization of the electromagnetic solution domain, is used. In each cell of the numerical discretization, an analytical calculation using the Moment Method (MM) is considered. In the case of strong skin effect (High Frequency: HF), the formulation makes use of the Impedance Boundary Condition (IBC); in the contrary case (Low Frequency: LF), the interior domain is discretized. Dans cet article nous proposons l'étude de l'influence d'une charge (induit) conductrice sur la répartition du courant inducteur ainsi que sur l'impédance du système. L'inducteur est à géométrie axisymétrique de forme solénoïdale ou pancake destiné au chauffage par induction. Une méthode semi-analytique, basée sur une discrétisation du domaine en mailles élémentaires auxquelles s'applique une formulation intégrale (Méthode des Circuits Couplés : MCC) des grandeurs électromagnétiques, est utilisée. Dans le cas où l'effet de peau est important (Haute Fréquence:HF), la formulation associe la Condition d'Impédance de Surface; dans le cas contraire (Basse Fréquence : BF), un maillage du domaine interne est pratiqué.

PubMed

Black, Amanda; Guilbert, Edith; Costescu, Dustin; Dunn, Sheila; Fisher, William; Kives, Sari; Mirosh, Melissa; Norman, Wendy V; Pymar, Helen; Reid, Robert; Roy, Geneviève; Varto, Hannah; Waddington, Ashley; Wagner, Marie-Soleil; Whelan, Anne Marie

2017-04-01

Mettre à la disposition des fournisseurs de soins des lignes directrices concernant le recours à des méthodes contraceptives pour prévenir la grossesse et la promotion d'une sexualité saine. Efficacité globale des méthodes contraceptives citées : évaluation de l'innocuité, des effets indésirables et de la baisse du taux de grossesse; effet des méthodes contraceptives citées sur la santé sexuelle et le bien-être général; disponibilité des méthodes contraceptives citées au Canada. RéSULTATS: Des recherches ont été effectuées dans MEDLINE et la base de données Cochrane afin d'en tirer les articles en anglais publiés entre janvier 1994 et décembre 2015 traitant de sujets liés à la contraception, à la sexualité et à la santé sexuelle, dans le but de mettre à jour le consensus canadien sur la contraception paru de février à avril 2004. Nous avons également passé en revue les publications pertinentes du gouvernement canadien, ainsi que les déclarations de principes issues d'organisations compétentes vouées à la santé et à la planification familiale. La qualité des résultats a été évaluée au moyen des critères décrits par le Groupe d'étude canadien sur les soins de santé préventifs. Les recommandations quant à la pratique sont classées en fonction de la méthode décrite dans le rapport du Groupe. DéCLARATIONS SOMMAIRES: RECOMMANDATIONS. Copyright © 2017. Published by Elsevier Inc.

Developmental Dyscalculia in Adults: Beyond Numerical Magnitude Impairment.

PubMed

De Visscher, Alice; Noël, Marie-Pascale; Pesenti, Mauro; Dormal, Valérie

2017-09-01

Numerous studies have tried to identify the core deficit of developmental dyscalculia (DD), mainly by assessing a possible deficit of the mental representation of numerical magnitude. Research in healthy adults has shown that numerosity, duration, and space share a partly common system of magnitude processing and representation. However, in DD, numerosity processing has until now received much more attention than the processing of other non-numerical magnitudes. To assess whether or not the processing of non-numerical magnitudes is impaired in DD, the performance of 15 adults with DD and 15 control participants was compared in four categorization tasks using numerosities, lengths, durations, and faces (as non-magnitude-based control stimuli). Results showed that adults with DD were impaired in processing numerosity and duration, while their performance in length and face categorization did not differ from controls' performance. Our findings support the idea of a nonsymbolic magnitude deficit in DD, affecting numerosity and duration processing but not length processing.

Short-term growth in head circumference and its relationship with supine length in healthy infants.

PubMed

Caino, Silvia; Kelmansky, Diana; Adamo, Paula; Lejarraga, Horacio

2010-01-01

Daily changes in height have been found to be a non-linear process. Its exact pattern is still controversial. In previous studies on 34 healthy children aged 0.32-12.99 years, we found that growth is a tri-phasic process: stasis, steep changes (or saltation) and continuous growth. There is very little information in the literature about daily changes in head circumference. The present study analysed growth in head circumference and supine length in eight healthy infants. Supine length and head circumference was measured five times a week during 151 days. Mean intra-observer technical error of measurement (TEM) for head circumference and supine length were 0.10 and 0.15 cm, respectively; smoothing techniques used were based on the TEM with a hard rejection criterion. The three types of events previously found in supine length are also present in head circumference. The number of steep changes was greater in supine length than in head circumference. Growth is a discontinuous and irregular process, present not only in long bones but also in skull bones. Although long-term growth curves of head circumference and supine length are different, when measured on a daily basis findings suggest that skull and long bones have a common pattern; the physiological basis needs future research.

Construction Process of the Length of [cube root of 2] by Paper Folding

ERIC Educational Resources Information Center

Guler, Hatice Kubra; Gurbuz, Mustafa Cagri

2018-01-01

The main purpose of this study is to investigate mathematics teachers' mathematical thinking process while they are constructing the length of [cube root of 2] by paper folding. To carry out this aim, two teachers--who are PhD. students--were interviewed one by one. During the construction, it was possible to observe the consolidation process of…

How current ginning processes affect fiber length uniformity index

USDA-ARS?s Scientific Manuscript database

There is a need to develop cotton ginning methods that improve fiber characteristics that are compatible with the newer and more efficient spinning technologies. A literature search produced recent studies that described how current ginning processes affect HVI fiber length uniformity index. Resul...

Multiple bottlenecks in hierarchical control of action sequences: what does "response selection" select in skilled typewriting?

PubMed

Yamaguchi, Motonori; Logan, Gordon D; Li, Vanessa

2013-08-01

Does response selection select words or letters in skilled typewriting? Typing performance involves hierarchically organized control processes: an outer loop that controls word level processing, and an inner loop that controls letter (or keystroke) level processing. The present study addressed whether response selection occurs in the outer loop or the inner loop by using the psychological refractory period (PRP) paradigm in which Task1 required typing single words and Task2 required vocal responses to tones. The number of letters (string length) in the words was manipulated to discriminate selection of words from selection of keystrokes. In Experiment 1, the PRP effect depended on string length of words in Task1, suggesting that response selection occurs in the inner loop. To assess contributions of the outer loop, the influence of string length was examined in a lexical-decision task that also involves word encoding and lexical access (Experiment 2), or to-be-typed words were preexposed so outer-loop processing could finish before typing started (Experiment 3). Response time for Task2 (RT2) did not depend on string length with lexical decision, and RT2 still depended on string length with typing preexposed strings. These results support the inner-loop locus of the PRP effect. In Experiment 4, typing was performed as Task2, and the effect of string length on typing RT interacted with stimulus onset asynchrony superadditively, implying that another bottleneck also exists in the outer loop. We conclude that there are at least two bottleneck processes in skilled typewriting. 2013 APA, all rights reserved

Perspectives on integrated modeling of transport processes in semiconductor crystal growth

NASA Technical Reports Server (NTRS)

Brown, Robert A.

1992-01-01

The wide range of length and time scales involved in industrial scale solidification processes is demonstrated here by considering the Czochralski process for the growth of large diameter silicon crystals that become the substrate material for modern microelectronic devices. The scales range in time from microseconds to thousands of seconds and in space from microns to meters. The physics and chemistry needed to model processes on these different length scales are reviewed.

Minimized state complexity of quantum-encoded cryptic processes

NASA Astrophysics Data System (ADS)

Riechers, Paul M.; Mahoney, John R.; Aghamohammadi, Cina; Crutchfield, James P.

2016-05-01

The predictive information required for proper trajectory sampling of a stochastic process can be more efficiently transmitted via a quantum channel than a classical one. This recent discovery allows quantum information processing to drastically reduce the memory necessary to simulate complex classical stochastic processes. It also points to a new perspective on the intrinsic complexity that nature must employ in generating the processes we observe. The quantum advantage increases with codeword length: the length of process sequences used in constructing the quantum communication scheme. In analogy with the classical complexity measure, statistical complexity, we use this reduced communication cost as an entropic measure of state complexity in the quantum representation. Previously difficult to compute, the quantum advantage is expressed here in closed form using spectral decomposition. This allows for efficient numerical computation of the quantum-reduced state complexity at all encoding lengths, including infinite. Additionally, it makes clear how finite-codeword reduction in state complexity is controlled by the classical process's cryptic order, and it allows asymptotic analysis of infinite-cryptic-order processes.

Unsteady Aerodynamics - Fundamentals and Applications of Aircraft Dynamics. Conference Proceedings of the Joint Symposium of the Fluid Dynamics and Flight Mechanics Panels Held in Goettingen, Federal Republic of Germany on 6-9 May 1985.

DTIC Science & Technology

1985-11-01

tourbillons daxe perpendicu-V laire A l’fcoulement principal) issu d’un profil occillant en Tamis dan;, do,, condition,, dn dorochagp dynamique. 5_10...a~rodyna- - mique sur R. A partir de cette analyse experimentale, une tentative de modelisation th~sorique des effets non *lin~ laires observes aux...cisaillement A la paroi d’un profil d’aile anim6 d’un mouvament harmonique parall~le ou parpandicu- laire A 1𔄀coulement non perturb~s", EUROMECH

Use or Reduction of Propagation and Noise Effects in Distributed Military Systems: Electromagnetic Wave Propagation Panel Symposium Held in Rethymno, Crete, Greece on 15-18 October 1990 (Utilisation ou Reduction des Effets de la Propagation et du Bruit dans les Systemes Militaires Distribues)

DTIC Science & Technology

1991-06-01

resolution are essential. The resulting frequency Paul A K., Anharmonic Frequency Analysis, pattern would be nonuniform and would change Mati. Comp...veloppement laire donnte par Ia relation empiri- de la trainte ainsi que Ie mouvemnent des par que 1231 ticules neutres dans Ia haute atmosph~re. log D...1515, 1973b. Bahar, E., Depolarization in nonuniform multi- layered structures--Full wave solutions, J. Math. Phys,, 15(2), 202-208, 1974, Ba , and M

Methode des Rayons avec Calcul d’Intensite Appliquee a la Propagation Anormale (Method of Ray Intensity Calculation as Applied to Anomalous Propagation),

DTIC Science & Technology

1986-06-01

D’INTENSITE 0 APPLIQUEE A LA PROPAGATION "ANORNALE" par D. Dion DEFENCE RESEARCH ESTABLISHMENT CENTRE DE RECHERCHES POUR LA DEFENSE VALCARTI ER 6- Tel: (418...faqon ils sont reli~s aux conditions atmosph~riques. Les ph~no- manes les plus importants A signaler sont les conduits et les "trous radio". En effet...6tant tr~s fr~quents en mer, 11 est d’int&rt pour la marine de rechercher des m~thodes simples permettant de les caract~riser. Des 6quations d’int

[Adverse effects of oxcarbazepine].

PubMed

Fang, Shu; Gong, Zhi-Cheng

2015-04-01

Oxcarbazepine is a new antiepileptic drug. The results of clinical trials suggest that oxcarbazepine is well tolerated and has less drug interactions. It is being used more and more widely in clinical practice, but its adverse effects should not be ignored. The most common adverse effects of oxcarbazepine are usually related to the central nervous system and digestive system, including fatigue, drowsiness, diplopia, dizziness, nausea and vomit. The common skin adverse reaction is rash. Long-term use of oxcarbazepine may also cause hyponatremia. This article reviews the literature from China and overseas about the adverse effets of oxcarbazepine over the last 10 years in order to find information about rational clinical use of oxcarbazepine.

Development of a Dynamic Biomechanical Model for Load Carriage: Phase 4, Parts A and B: Development of a Dynamic Biomechanical Model Version 2 of Human Load Carriage

DTIC Science & Technology

2005-08-01

de charge et de comprendre les effets des caractéristiques de conception de systèmes de transport de charge sur la santé et la mobilité humaines...supérieur et le torse inférieur et la force totale de contact. Les travaux sont en cours en vue de l’intégration d’une couche de peau , ce qui...permettrait d’examiner en détail l’interaction au niveau de l’interface équipement- peau . Le but consiste à évaluer les risques de

Effet des Plastifiants sur la Temperature de Transition Vitreuse, Tg, du Butadiene a Terminaison Hydroxy et du Polyazoture de Glycidyle - Simulations et Experiences (Effect of the Plasticizers on the Vitreous Transition Temperature, Tg, of the Butadiene to Termination Hydroxy and the Polyazoture of Glycidyle - Simulations and Experiences)

DTIC Science & Technology

2008-09-01

diverses temperatures 26 a) HTPB pur b) HTPB-DOA (polymere et plastifiant) c) GAP pur d) Gpl pur e)Gap-Gpl Liste des tableaux Tableau 1...Composition des mailles amorphes construites 11 Tableau 2. Proprietes des polymeres et plastifiants utilises 11 Tableau 3. Comparaisons entre les Tt...obtenues experimentalement, les T% publiees dans les ecrits scientifiques et celles predites a partir des 7"gdes composes purs 19 Tableau 4. Comparaison

Apparatus for fabricating continuous lengths of superconductor

DOEpatents

Kroeger, Donald M.; List, III, Frederick A.

2002-01-01

A process and apparatus for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor comprising a layer of said superconducting precursor powder between said first substrate ribbon and said second substrates ribbon. The layered superconductor is then heat treated to establish the superconducting phase of said superconductor precursor powder.

Apparatus for fabricating continuous lengths of superconductor

DOEpatents

Kroeger, Donald M.; List, III, Frederick A.

2001-01-01

A process and apparatus for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor comprising a layer of said superconducting precursor powder between said first substrate ribbon and said second substrates ribbon. The layered superconductor is then heat treated to establish the superconducting phase of said superconductor precursor powder.

Evaluation of the morphological characteristic and sex differences of sternum by multi-detector computed tomography.

PubMed

Ateşoğlu, Sibel; Deniz, Mustafa; Uslu, Ayşe İmge

2018-01-18

Sternum is one of the skeleton parts which have frequently congenital anomalies and variations are commonly used by researchers in determining sex. We evaluated the morphological characteristics and sex-related changes of the sternum in adult individuals using multidetector CT in our study. 200 adults (103 female and 97 male) aged between 18-87 years were evaluated. Utilizing the morphological characteristics of the sternum based on the multi-slice images; length, width and the thickness of Manubrium, length, width and the thickness of Corpus Sterni, total length of Sternum, Sternal angle, Sternal index, length of the xiphoid process, the thickness of xiphoid process, the number of indents of xiphoid process were measured and a total of 20 parameters were evaluated by adding age, height and weight to these variables. The mean length of the manubrium, the length of corpus sterni, the length of total sternum, sternal index, sternal angle were found in females 46.7±5.1,86.6±9.7, 133.1±1.1, 54.47±10.0 and 163.75±5.79; in males 51.2±6, 102.4±13.3, 154.1±13.1, 50.11±10.02 and 162.21±6.17, respectively. We found that Hyrtl's law and Sternal index did not provide adequate accuracy for sex determination in our patients. It has been detected that the length of the Manubrium alone is not helpful for individual samples. Total length of the sternum was found to be more reliable than the length of the Manubrium and the length of corpus Sterni. We determined Sternal cleft and Sternal foramen as 0.5% and 3.5%, respectively. We suggest that the Morphometric standards cannot be universally applied and can demonstrate individual differences. The standard rules must be implemented for every population.

Multi-length Scale Material Model Development for Armorgrade Composites

DTIC Science & Technology

2014-05-02

various microstructural features and processes , at different length- scales, to the macroscopic-level ballistic-penetration resistance of PPTA-based...fabric or PPTA-fiber-reinforced polymer-matrix composites. Specifically, the role of various material-synthesis-/fiber- processing -induced defects, as...well as defects induced during the weaving process , was investigated. The results obtained clearly revealed that 1. REPORT DATE (DD-MM-YYYY) 4. TITLE

Phosphatidylserine is a global immunosuppressive signal in efferocytosis, infectious disease, and cancer

PubMed Central

Birge, R B; Boeltz, S; Kumar, S; Carlson, J; Wanderley, J; Calianese, D; Barcinski, M; Brekken, R A; Huang, X; Hutchins, J T; Freimark, B; Empig, C; Mercer, J; Schroit, A J; Schett, G; Herrmann, M

2016-01-01

Apoptosis is an evolutionarily conserved and tightly regulated cell death modality. It serves important roles in physiology by sculpting complex tissues during embryogenesis and by removing effete cells that have reached advanced age or whose genomes have been irreparably damaged. Apoptosis culminates in the rapid and decisive removal of cell corpses by efferocytosis, a term used to distinguish the engulfment of apoptotic cells from other phagocytic processes. Over the past decades, the molecular and cell biological events associated with efferocytosis have been rigorously studied, and many eat-me signals and receptors have been identified. The externalization of phosphatidylserine (PS) is arguably the most emblematic eat-me signal that is in turn bound by a large number of serum proteins and opsonins that facilitate efferocytosis. Under physiological conditions, externalized PS functions as a dominant and evolutionarily conserved immunosuppressive signal that promotes tolerance and prevents local and systemic immune activation. Pathologically, the innate immunosuppressive effect of externalized PS has been hijacked by numerous viruses, microorganisms, and parasites to facilitate infection, and in many cases, establish infection latency. PS is also profoundly dysregulated in the tumor microenvironment and antagonizes the development of tumor immunity. In this review, we discuss the biology of PS with respect to its role as a global immunosuppressive signal and how PS is exploited to drive diverse pathological processes such as infection and cancer. Finally, we outline the rationale that agents targeting PS could have significant value in cancer and infectious disease therapeutics. PMID:26915293

Phosphatidylserine is a global immunosuppressive signal in efferocytosis, infectious disease, and cancer.

PubMed

Birge, R B; Boeltz, S; Kumar, S; Carlson, J; Wanderley, J; Calianese, D; Barcinski, M; Brekken, R A; Huang, X; Hutchins, J T; Freimark, B; Empig, C; Mercer, J; Schroit, A J; Schett, G; Herrmann, M

2016-06-01

Apoptosis is an evolutionarily conserved and tightly regulated cell death modality. It serves important roles in physiology by sculpting complex tissues during embryogenesis and by removing effete cells that have reached advanced age or whose genomes have been irreparably damaged. Apoptosis culminates in the rapid and decisive removal of cell corpses by efferocytosis, a term used to distinguish the engulfment of apoptotic cells from other phagocytic processes. Over the past decades, the molecular and cell biological events associated with efferocytosis have been rigorously studied, and many eat-me signals and receptors have been identified. The externalization of phosphatidylserine (PS) is arguably the most emblematic eat-me signal that is in turn bound by a large number of serum proteins and opsonins that facilitate efferocytosis. Under physiological conditions, externalized PS functions as a dominant and evolutionarily conserved immunosuppressive signal that promotes tolerance and prevents local and systemic immune activation. Pathologically, the innate immunosuppressive effect of externalized PS has been hijacked by numerous viruses, microorganisms, and parasites to facilitate infection, and in many cases, establish infection latency. PS is also profoundly dysregulated in the tumor microenvironment and antagonizes the development of tumor immunity. In this review, we discuss the biology of PS with respect to its role as a global immunosuppressive signal and how PS is exploited to drive diverse pathological processes such as infection and cancer. Finally, we outline the rationale that agents targeting PS could have significant value in cancer and infectious disease therapeutics.

Asymptotically optimum multialternative sequential procedures for discernment of processes minimizing average length of observations

NASA Astrophysics Data System (ADS)

Fishman, M. M.

1985-01-01

The problem of multialternative sequential discernment of processes is formulated in terms of conditionally optimum procedures minimizing the average length of observations, without any probabilistic assumptions about any one occurring process, rather than in terms of Bayes procedures minimizing the average risk. The problem is to find the procedure that will transform inequalities into equalities. The problem is formulated for various models of signal observation and data processing: (1) discernment of signals from background interference by a multichannel system; (2) discernment of pulse sequences with unknown time delay; (3) discernment of harmonic signals with unknown frequency. An asymptotically optimum sequential procedure is constructed which compares the statistics of the likelihood ratio with the mean-weighted likelihood ratio and estimates the upper bound for conditional average lengths of observations. This procedure is shown to remain valid as the upper bound for the probability of erroneous partial solutions decreases approaching zero and the number of hypotheses increases approaching infinity. It also remains valid under certain special constraints on the probability such as a threshold. A comparison with a fixed-length procedure reveals that this sequential procedure decreases the length of observations to one quarter, on the average, when the probability of erroneous partial solutions is low.

Le niobate de lithium a haute temperature pour les applications ultrasons =

NASA Astrophysics Data System (ADS)

De Castilla, Hector

L'objectif de ce travail de maitrise en sciences appliquees est de trouver puis etudier un materiau piezoelectrique qui est potentiellement utilisable dans les transducteurs ultrasons a haute temperature. En effet, ces derniers sont actuellement limites a des temperatures de fonctionnement en dessous de 300°C a cause de l'element piezoelectrique qui les compose. Palier a cette limitation permettrait des controles non destructifs par ultrasons a haute temperature. Avec de bonnes proprietes electromecaniques et une temperature de Curie elevee (1200°C), le niobate de lithium (LiNbO 3) est un bon candidat. Mais certaines etudes affirment que des processus chimiques tels que l'apparition de conductivite ionique ou l'emergence d'une nouvelle phase ne permettent pas son utilisation dans les transducteurs ultrasons au-dessus de 600°C. Cependant, d'autres etudes plus recentes ont montre qu'il pouvait generer des ultrasons jusqu'a 1000°C et qu'aucune conductivite n'etait visible. Une hypothese a donc emerge : une conductivite ionique est presente dans le niobate de lithium a haute temperature (>500°C) mais elle n'affecte que faiblement ses proprietes a hautes frequences (>100 kHz). Une caracterisation du niobate de lithium a haute temperature est donc necessaire afin de verifier cette hypothese. Pour cela, la methode par resonance a ete employee. Elle permet une caracterisation de la plupart des coefficients electromecaniques avec une simple spectroscopie d'impedance electrochimique et un modele reliant de facon explicite les proprietes au spectre d'impedance. Il s'agit de trouver les coefficients du modele permettant de superposer au mieux le modele avec les mesures experimentales. Un banc experimental a ete realise permettant de controler la temperature des echantillons et de mesurer leur impedance electrochimique. Malheureusement, les modeles actuellement utilises pour la methode par resonance sont imprecis en presence de couplages entre les modes de vibration. Cela implique de posseder plusieurs echantillons de differentes formes afin d'isoler chaque mode principal de vibration. De plus, ces modeles ne prennent pas bien en compte les harmoniques et modes en cisaillement. C'est pourquoi un nouveau modele analytique couvrant tout le spectre frequentiel a ete developpe afin de predire les resonances en cisaillement, les harmoniques et les couplages entre les modes. Neanmoins, certains modes de resonances et certains couplages ne sont toujours pas modelises. La caracterisation d'echantillons carres a pu etre menee jusqu'a 750°C. Les resultats confirment le caractere prometteur du niobate de lithium. Les coefficients piezoelectriques sont stables en fonction de la temperature et l'elasticite et la permittivite ont le comportement attendu. Un effet thermoelectrique ayant un effet similaire a de la conductivite ionique a ete observe ce qui ne permet pas de quantifier l'impact de ce dernier. Bien que des etudes complementaires soient necessaires, l'intensite des resonances a 750°C semble indiquer que le niobate de lithium peut etre utilise pour des applications ultrasons a hautes frequences (>100 kHz).

La projection par plasma : une revue

NASA Astrophysics Data System (ADS)

Fauchais, P.; Grimaud, A.; Vardelle, A.; Vardelle, M.

The quality of a plasma sprayed coating depends on numerous parameters that start to be understood due to the recent progresses in modelling and measurement techniques for plasma jets, momentum, heat and mass transfers between plasma and particles, the way the particules splat and cool down upon impact on the substrate or the previously deposited layers. In this paper, first are recalled the used measurement techniques and their limitations both for plasma jets and particles in flight. Then are underlined the importance of the different phenomena envolved in the transfers between plasma and particles such as steep temperature and chemical species density gradients around the particles, heat propagation phenomenon especially for ceramic particles and the connected evaporation effect, rarefaction effect which occurs even at atmospheric pressure. The problems related to the size and injection velocity distributions which determine the trajectory distributions and the heat treatments undergone by the particles are treated. The study of plasma generation shows on one hand for d.c. arc plasma torches the drastic influence on the plasma jets lengths and diameters of the gas injection chamber design, the gas nature, the design of the arc chamber and nozzle, the surrounding atmosphere (especially air pumping which cools down very fast the plasma) and on the other hand for RF plasmas the importance of the particle injection design to avoid the coupling between the RF discharge and the carrier gas with the particles. All these points are illustrated with examples of coatings of alumina, zirconia carbide and nickel particles. The way the particles splat is then studied with the chemical reactions in flight, the fast quenching of the particles and the resulting cristalline structures, the coating adhesion and also the residual stesses and their control through that of the temperature gradients into the coatings during spraying. At last a few actual and potential applications are presented in the fields of aeronautics and mechanics. La qualité d'un dépôt projete par plasma dépend de nombreux paramètres que l'on commence à mieux appréhender du fait des progrès de la modélisation et de la métrologie tant des écoulements plasmas que des transferts plasma-particules ou que des conditions d'écrasement et de refroidissement des particules lors de leur impact sur le substrat ou les couches déjà déposées. Les techniques de mesure utilisdes et leurs limitations sont d'abord rappelées tant pour les jets de plasma que pour les particules en vol et l'importance des différents phénomènes intervenant dans les transferts plasma-particules est soulignée : gradients de température et de concentration d'espèces chimiques très élevés autour des particules, effets de propagation de la chaleur, notamment pour les particules céramiques, effet d'évaporation, effet de raréfaction sensible dès la pression atmosphérique. Les problèmes de distribution de taille et de vitesse d'injection des particules sont également abordés car ils conditionnent les distributions de trajectoires et donc le traitement des particules dans le jet de plasma. La génération du plasma montre d'une part 1'influence considérable de l'injection du gaz, de sa nature, du dessin de la chambre d'arc et de la tuyère ainsi que du pompage de l'air ambiant sur la longueur des jets de plasma d'arc et d'autre part les problèmes d'injection pour éviter le couplage avec la décharge dans les jets de plasmas R.E Tout ceci est illustré avec des exemples de dépôt d'alumine, de zircone, de cermet carbure et de nickel. L'écrasement des particules est ensuite abordé avec les problèmes de réactions chimiques, de trempe ultra-rapide et donc de structure cristalline des dépôts, d'adhdsion mais aussi de containtes résiduelles et de leur contrôle via les gradients de température dans les dépôts pendant le tir. Enfin quelques applications actuelles sont présentées notamment pour l'aéronautique et la mécanique.

Cognitive inhibition of number/length interference in a Piaget-like task: evidence by combining ERP and MEG.

PubMed

Joliot, Marc; Leroux, Gaëlle; Dubal, Stéphanie; Tzourio-Mazoyer, Nathalie; Houdé, Olivier; Mazoyer, Bernard; Petit, Laurent

2009-08-01

We combined event-related potential (ERP) and magnetoencephalography (MEG) acquisition and analysis to investigate the electrophysiological markers of the inhibitory processes involved in the number/length interference in a Piaget-like numerical task. Eleven healthy subjects performed four gradually interfering conditions with the heuristic "length equals number" to be inhibited. Low resolution tomography reconstruction was performed on the combined grand averaged electromagnetic data at the early (N1, P1) and late (P2, N2, P3(early) and P3(late)) latencies. Every condition was analyzed at both scalp and regional brain levels. The inhibitory processes were visible on the late components of the electromagnetic brain activity. A right P2-related frontal orbital activation reflected the change of strategy in the inhibitory processes. N2-related SMA/cingulate activation revealed the first occurrence of the stimuli processing to be inhibited. Both P3 components revealed the working memory processes operating in a medial temporal complex and the mental imagery processes subtended by the precuneus. Simultaneous ERP and MEG signal acquisition and analysis allowed to describe the spatiotemporal patterns of neural networks involved in the inhibition of the "length equals number" interference. Combining ERP and MEG ensured a sensitivity which could be reached previously only through invasive intracortical recordings.

Parafoveal Processing Affects Outgoing Saccade Length during the Reading of Chinese

ERIC Educational Resources Information Center

Liu, Yanping; Reichle, Erik D.; Li, Xingshan

2015-01-01

Participants' eye movements were measured while reading Chinese sentences in which target-word frequency and the availability of parafoveal processing were manipulated using a gaze-contingent boundary paradigm. The results of this study indicate that preview availability and its interaction with word frequency modulated the length of the saccades…

CANAL EMERGES FROM EAST SIDE OF MTR BUILDING. "EXTRA" LENGTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CANAL EMERGES FROM EAST SIDE OF MTR BUILDING. "EXTRA" LENGTH WAS TO STORE SPENT FUEL THAT WOULD ACCUMULATE BEFORE THE CHEMICAL PROCESSING PLANT WAS READY TO PROCESS IT. INL NEGATIVE NO. 1659. Unknown Photographer, 3/9/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

75 FR 70279 - Agency Information Collection Activities: Submitted for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

...-length AUDIT PROCESS transmission contracts, See Note. production and operating agreements and related... production method. 1206.458(c)(1)(iv) and (c)(2)(vi).. Submit arm's-length washing AUDIT PROCESS contracts...). The Secretary is required by various laws to manage mineral resource production from Federal and...

Measurement of operator workload in an information processing task

NASA Technical Reports Server (NTRS)

Jenney, L. L.; Older, H. J.; Cameron, B. J.

1972-01-01

This was an experimental study to develop an improved methodology for measuring workload in an information processing task and to assess the effects of shift length and communication density (rate of information flow) on the ability to process and classify verbal messages. Each of twelve subjects was exposed to combinations of three shift lengths and two communication densities in a counterbalanced, repeated measurements experimental design. Results indicated no systematic variation in task performance measures or in other dependent measures as a function of shift length or communication density. This is attributed to the absence of a secondary loading task, an insufficiently taxing work schedule, and the lack of psychological stress. Subjective magnitude estimates of workload showed fatigue (and to a lesser degree, tension) to be a power function of shift length. Estimates of task difficulty and fatigue were initially lower but increased more sharply over time under low density than under high density conditions. An interpretation of findings and recommedations for furture research are included. This research has major implications to human workload problems in information processing of air traffic control verbal data.

Length distributions of Au-catalyzed III-V nanowires in different regimes of the diffusion-induced growth

NASA Astrophysics Data System (ADS)

Berdnikov, Y.; Zhiglinsky, A. A.; Rylkova, M. V.; Dubrovskii, V. G.

2017-11-01

We present a model for kinetic broadening effects on the length distributions of Au-catalyzed III-V nanowires obtained in the growth regime with adatom diffusion from the substrate and the nanowire sidewalls to the top. We observe three different regimes for the length distribution evolution with time. For short growth times, the length distribution is sub-Poissonian, converting to broader than Poissonian with increasing the mean length above a certain threshold value. After the diffusion flux from the nanowire sidewalls has stabilized, the length distribution variance increases linearly with the mean length, as in the Poissonian process.

Manipulation of Length and Lexicality Localizes the Functional Neuroanatomy of Phonological Processing in Adult Readers

PubMed Central

Church, Jessica A.; Balota, David A.; Petersen, Steven E.; Schlaggar, Bradley L.

2010-01-01

In a previous study of single word reading, regions in the left supramarginal gyrus and left angular gyrus showed positive BOLD activity in children but significantly less activity in adults for high-frequency words. This developmental decrease may reflect decreased reliance on phonological processing for familiar stimuli in adults. Therefore, in the present study, variables thought to influence phonological demand (string length and lexicality) were manipulated. Length and lexicality effects in the brain were explored using both ROI and whole-brain approaches. In the ROI analysis, the supramarginal and angular regions from the previous study were applied to this study. The supramarginal region showed a significant positive effect of length, consistent with a role in phonological processing, whereas the angular region showed only negative deflections from baseline with a strong effect of lexicality and other weaker effects. At the whole-brain level, varying effects of length and lexicality and their interactions were observed in 85 regions throughout the brain. The application of hierarchical clustering analysis to the BOLD time course data derived from these regions revealed seven clusters, with potentially revealing anatomical locations. Of note, a left angular gyrus region was the sole constituent of one cluster. Taken together, these findings in adult readers (1) provide support for a widespread set of brain regions affected by lexical variables, (2) corroborate a role for phonological processing in the left supramarginal gyrus, and (3) do not support a strong role for phonological processing in the left angular gyrus. PMID:20433237

Fast implementation of length-adaptive privacy amplification in quantum key distribution

NASA Astrophysics Data System (ADS)

Zhang, Chun-Mei; Li, Mo; Huang, Jing-Zheng; Patcharapong, Treeviriyanupab; Li, Hong-Wei; Li, Fang-Yi; Wang, Chuan; Yin, Zhen-Qiang; Chen, Wei; Keattisak, Sripimanwat; Han, Zhen-Fu

2014-09-01

Post-processing is indispensable in quantum key distribution (QKD), which is aimed at sharing secret keys between two distant parties. It mainly consists of key reconciliation and privacy amplification, which is used for sharing the same keys and for distilling unconditional secret keys. In this paper, we focus on speeding up the privacy amplification process by choosing a simple multiplicative universal class of hash functions. By constructing an optimal multiplication algorithm based on four basic multiplication algorithms, we give a fast software implementation of length-adaptive privacy amplification. “Length-adaptive” indicates that the implementation of privacy amplification automatically adapts to different lengths of input blocks. When the lengths of the input blocks are 1 Mbit and 10 Mbit, the speed of privacy amplification can be as fast as 14.86 Mbps and 10.88 Mbps, respectively. Thus, it is practical for GHz or even higher repetition frequency QKD systems.

Length adaptation of airway smooth muscle.

PubMed

Bossé, Ynuk; Sobieszek, Apolinary; Paré, Peter D; Seow, Chun Y

2008-01-01

Many types of smooth muscle, including airway smooth muscle (ASM), are capable of generating maximal force over a large length range due to length adaptation, which is a relatively rapid process in which smooth muscle regains contractility after experiencing a force decrease induced by length fluctuation. Although the underlying mechanism is unclear, it is believed that structural malleability of smooth muscle cells is essential for the adaptation to occur. The process is triggered by strain on the cell cytoskeleton that results in a series of yet undefined biochemical and biophysical events leading to restructuring of the cytoskeleton and contractile apparatus and consequently optimization of the overlap between the myosin and actin filaments. Although length adaptability is an intrinsic property of smooth muscle, maladaptation of ASM could result in excessive constriction of the airways and the inability of deep inspirations to dilate them. In this article, we describe the phenomenon of length adaptation in ASM and some possible underlying mechanisms that involve the myosin filament assembly and disassembly. We discuss a possible role of maladaptation of ASM in the pathogenesis of asthma. We believe that length adaptation in ASM is mediated by specific proteins and their posttranslational regulations involving covalent modifications, such as phosphorylation. The discovery of these molecules and the processes that regulate their activity will greatly enhance our understanding of the basic mechanisms of ASM contraction and will suggest molecular targets to alleviate asthma exacerbation related to excessive constriction of the airways.

Rayleigh instability at small length scales.

PubMed

Gopan, Nandu; Sathian, Sarith P

2014-09-01

The Rayleigh instability (also called the Plateau-Rayleigh instability) of a nanosized liquid propane thread is investigated using molecular dynamics (MD). The validity of classical predictions at small length scales is verified by comparing the temporal evolution of liquid thread simulated by MD against classical predictions. Previous works have shown that thermal fluctuations become dominant at small length scales. The role and influence of the stochastic nature of thermal fluctuations in determining the instability at small length scale is also investigated. Thermal fluctuations are seen to dominate and accelerate the breakup process only during the last stages of breakup. The simulations also reveal that the breakup profile of nanoscale threads undergo modification due to reorganization of molecules by the evaporation-condensation process.

A new approach to the study of therapeutic work in the transference.

PubMed

Pessier, J; Stuart, J

2000-02-01

This article proposes a new method for evaluating the effects of therapist and patient work in the transference. Work in the transference is often difficult for the patient, and may show a characteristic pattern of lag between a transference interpretation and its therapeutic effect. To account for this lag, we assessed patient responses to interpretations over the course of entire sessions. The narratives patients told about others, or Relationship Episodes (REs), were used as units of study. In a sample of three consecutive sessions taken from each of three psychodynamic cases, we identified several instances when transference work appeared to have an initial inhibitory effect, but facilitated progress over the course of the entire session. We recommend that to examine the effects of interpretations future studies use longer, more clinically meaningful segments of patient speech than have been used in the past. Dieser Beitrag propagiert eine neue Methode zur Evaluierung der Effekte von Übertragungsarbeit durch Therapeut und Patient. Arbeit in der Übertragung ist für den Patienten oftmals schwierig und zeigt häufig eine charakteristisches Muster von zeitlichen Verzögerungen bzgl. Übertragungsdeutungen und deren therapeutischen Effekten. Um diese zeitliche Verzögerung zu erklären, untersuchten wir die Reaktionen von Patienten auf derartige Deutungen im Verlauf ganzer Sitzungen. Narrative, in denen die Patienten über andere berichteten, also Beziehungsepisoden, dienten in dieser Studie als Einheit. In einter Stichprobe dreier aufeinanderfolgender Sitzugnen, die sich auf drei Fälle bezogen, identifizierten wir verschiedene Umstände, unter denen Übertragungsarbeit anfänglich einen hemmenden Affekt zu haben schien, letztlich aber den Gesamtverlauf der Sitzung günstig beeinflussten. Wir empfehlen, in Zukunft die Effekte von Übertragungsdeutungen auf der Basis längerer, klinische sinnvoller Segmente von Patientenäußerungen zu untersuchen als dies in der Vergangenheit der Fall war. Cet article propose une nouvelle méthode pour évaluer les effets du travail sur le transfert entre thérapeute et patient. Ce travail est souvent difficile pour le patient, et il peut y avoir un pattern caractéristique de délai entre une înterprétation de transfert et son effet thérapeutique. Pour expliquer ce délai, nous avons évalué les réponses des patients à des interprétatios au cours de séances entières. C'est les narrations des patients sur d'autres, ou Episodes Relationnels (ERs), qui ont constitué les unités de base de cette étude. Dans un échantillon de 3 séances consécutives venant de 3 cas psychodynamiques, nous avons identifié plusieurs moments où le traail sur le transfert semblait avoir un effet inhibitoire initial, mais favorisait le progrès en regardant la séance entière. Nous recommandons pour de futures études sur l'effet des interprétations de prendre des segments plus longs et cliniquement significatifs du récit du patient que ceux utilisés dans le passé. Este artículo propone un nuevo método para evaluar los efectos del trabajo de terapeuta y paciente en la transferencia. El trabajo en la transferencia es, con frecuencia, dificil para el paciente y puede mostrar un lapso característico entre una interpretación transferencial y sus efectos terapéuticos. Para explicar este lapso, hemos evaluado las respuestas del paciente a las interpretaciones a lo largo de sesiones enteras. Como unidad de estudio se usaron las narrativas de los pacientes acerca de otros, o sea, los episodios relacionales (REs). En una muestra de tres sesiones consecutivas tomadas de tres casos psicodinámicos, identificamos varioss casos en los que la trasferencia parecía tener un efecto inicial inhibitorio, aunque se vio que a lo largo de la sesión facilitaba el progreso. Recomendamos que, para examinar los efectos de las interpretaciones, los futuros estudios usen segmentos más largos y clínicamente más significativos del habia del paciente que los que se usaron en el pasado.

Neural Correlates of Temporal Auditory Processing in Developmental Dyslexia during German Vowel Length Discrimination: An fMRI Study

ERIC Educational Resources Information Center

Steinbrink, Claudia; Groth, Katarina; Lachmann, Thomas; Riecker, Axel

2012-01-01

This fMRI study investigated phonological vs. auditory temporal processing in developmental dyslexia by means of a German vowel length discrimination paradigm (Groth, Lachmann, Riecker, Muthmann, & Steinbrink, 2011). Behavioral and fMRI data were collected from dyslexics and controls while performing same-different judgments of vowel duration in…

The Cross-Script Length Effect: Further Evidence Challenging PDP Models of Reading Aloud

ERIC Educational Resources Information Center

Rastle, Kathleen; Havelka, Jelena; Wydell, Taeko N.; Coltheart, Max; Besner, Derek

2009-01-01

The interaction between length and lexical status is one of the key findings used in support of models of reading aloud that postulate a serial process in the orthography-to-phonology translation (B. S. Weekes, 1997). However, proponents of parallel models argue that this effect arises in peripheral visual or articulatory processes. The authors…

Large-scale evidence of dependency length minimization in 37 languages

PubMed Central

Futrell, Richard; Mahowald, Kyle; Gibson, Edward

2015-01-01

Explaining the variation between human languages and the constraints on that variation is a core goal of linguistics. In the last 20 y, it has been claimed that many striking universals of cross-linguistic variation follow from a hypothetical principle that dependency length—the distance between syntactically related words in a sentence—is minimized. Various models of human sentence production and comprehension predict that long dependencies are difficult or inefficient to process; minimizing dependency length thus enables effective communication without incurring processing difficulty. However, despite widespread application of this idea in theoretical, empirical, and practical work, there is not yet large-scale evidence that dependency length is actually minimized in real utterances across many languages; previous work has focused either on a small number of languages or on limited kinds of data about each language. Here, using parsed corpora of 37 diverse languages, we show that overall dependency lengths for all languages are shorter than conservative random baselines. The results strongly suggest that dependency length minimization is a universal quantitative property of human languages and support explanations of linguistic variation in terms of general properties of human information processing. PMID:26240370

The use of macroalgae (Gracilaria changii) as bio-adsorbent for Copper (II) removal

NASA Astrophysics Data System (ADS)

Lavania-Baloo; Idayu, Nordin; Umar Salihi, Ibrahim; Zainoddin, Jamari

2017-05-01

Biosorption of heavy metals using marine macroalgae biomass can be an effective process and alternative to conventional methods. Activated carbon was developed from macroalgae (Gracilaria changii) and used as adsorbents for the removal of copper (II) from wastewater. Gracilaria changii based activated carbon (GCBAC) was prepared using muffle furnace at a constant temperature of 300 °C for 1 hour. Batch adsorption experiments were conducted to investigate the effets of important parameters such as pH, contact time, initial metal concentration and adsorbent dosage on the removal of Cu (II) from synthetic aqueous solution. Batch adsorption study shows that removal of Cu (II) using GCBAC relied upon pH, contact time, initial metal concentration and GCBAC dosage. The optimum conditions parameters were found to be pH 6.0, time of 60 minutes and GCBAC dosage of 0.3 g, respectively. Adsorption data was described better by Freundlich isotherm model with R2 value of 0.7936. The maximum Cu (II) adsorption capacity of GCBAC was found to be 0.07 mg/g. The experimental adsorption data obtained fitted well into Pseudo-second-order kinetic model, with R2 value near unity. Thus, GCBAC can be used as an effective adsorbent for the removal of Cu (II) from aqueous solution.

Nanomatériaux : Une revue des définitions, des applications et des effets sur la santé. Comment implémenter un développement sûr

NASA Astrophysics Data System (ADS)

Gaffet, Eric

2011-09-01

Nanomaterials are an active area of research but also an economic sector in full expansion which addresses many application domains. For instance, French production for the most common nanomaterials (such as silica, titanium dioxide, carbon black) is in the hundreds of thousands of tons. As for any innovation, one must consider the risks and, if necessary, establish rules to protect consumer health and that of the worker. This article addresses in particular difficulties in defining these materials, the state of knowledge on human or environmental toxicity and requirements and agencies in charge of safety.

Effets thermique et hydrothermal de la coulée de basalte triasico-liasique sur les argiles du bassin d'Argana (Maroc)Thermal and hydrothermal effects of Triassic Liassic basalt flow deposition on clays (Agana Basin, Morocco)

NASA Astrophysics Data System (ADS)

Daoudi, Lahcen; Pot de Vin, Jean-Luc

Thermal and hydrothermal effects of Triassic-Liassic basalt flow deposition on sedimentary series of the Argana Basin are responsible for major modifications in detrital clays, until 20 m in depth. It expressed by transformation of detrital smectite to corrensite and moreover to chlorite, and by increasing illite crystallinity. On the 2 m of sediments located immediately under the flow, magnesium-rich hydrothermal fluids have caused precipitation of new mineral phases. To cite this article: L. Daoudi, J.-L. Pot de Vin, C. R. Geoscience 334 (2002) 463-468.

Studying Hostile, Deceptive, and Dangerous Surroundings: Report of a Workshop on Social Research Methods for Non-Permissive Environments (Etudier des Milieux Hostiles, Trompeurs et Dangereux - Rapport Concernant un Atelier sur les Methodes de Recherche Sociale an Milieu non Permissif)

DTIC Science & Technology

2010-08-01

des groupes de consultation pour déterminer l’effet des opérations communes sur la population locale. Ils ont établi des « mesures de rendement...fondées sur les relations avec les habitants et les résultats des groupes de consultation ainsi que des « mesures de production » basées sur la ...l’ethnographie de combat, et la recherche d’initié étranger peuvent aider à tracer les microcosmes sociaux dans un

The Effect of Mass, Wind Angle, and Erection Technique on the Aeroelastic Behaviour of a Cable-Stayed Bridge Model (Effet de la Masse, de L’Angle du Vent et de la Technique D’Erection sur le Comportement Aeroelastique d’une Marquette de Pont a Haubans).

DTIC Science & Technology

1987-09-01

response. An estimate of the buffeting response for the two cases is presented in Figure 4, using the theory of Irwin (Reference 7). Data acquisition was...values were obtained using the log decrement method by exciting the bridge in one mode and observing the decay of the response. Classical theory would...added mass or structural damping level. The addition of inertia to the deck would tend to lower the response according to classical vibration theory

Effects of Integrated Hearing Protection Headsets on the Quality of Radio Communications (Effets des Casques D’ecoute Munis d’un Dispositif Integre de Protection de L’Ouie sur la Qualite des Communications Radio)

DTIC Science & Technology

2009-07-01

National Defence, 2009 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2009 DRDC Toronto TR...Parallèlement, on a évalué le degré d’acceptation de l’utilisateur à l’aide d’un questionnaire. Méthode: Cinq hommes ayant un seuil d’audition...hearing protection and usability. Résumé …..... L’intelligibilité de la parole en provenance d’un poste radio personnel (PRR) muni de casques

Modelization des consequences possibles de la future demande bioenergetique mondiale pour le bois et les forest en France

Treesearch

Joseph Buongiorno; Ronald Raunikar; Shushuai Zhu

2011-01-01

L’article présente une exploration, menée au moyen d’un modèle mondial de la filière-bois, de l’effet sur la filière-bois française des modifications actuelles et prévisibles de la demande mondiale en énergie issue de la biomasse. Deux scénarios contrastés sont testés. Les résultats sont mis en perspective et soulignent le conflit potentiel entre usages du bois : bois...

A Random Matrix Theory Approach to National Procurement Spending: Applications to the CC130 Hercules Fleet Performance

DTIC Science & Technology

2010-08-01

indicateurs de rendement de haut niveau, ce qui donne à penser que la flotte a une réaction inélastique aux chocs de dépenses. Ces résultats révèlent...corrélations entre les données. DRDC CORA TM 2010-168 i Dr aft Co py This page intentionally left blank. ii DRDC CORA TM 2010-168 Dr aft Co py Executive ...celles qui sont observées dans les données ont peu d’effet sur le rendement. Nous pouvons conclure que l’entretien est très robuste ; les chocs de

Determination of aquifer roof extending under the sea from variable-density flow modelling of groundwater response to tidal loading: case study of the Jahe River Basin, Shandong Province, China

NASA Astrophysics Data System (ADS)

Cheng, Jianmei; Chen, Chongxi; Ji, Menrui

The main task of studies on salt-water intrusion into coastal confined aquifers is to predict the position of the fresh- salt-water interface, which can be determined from the length of the aquifer roof extending under the sea. Records of groundwater level affected by tides can be used to infer hydrological conditions and determine hydraulic parameters of an aquifer extending under the sea. In this paper, a three-dimensional, variable-density groundwater flow model has been developed to determine the equivalent roof length of an aquifer extending under the sea from the tidal-effected data of groundwater level in the Jahe River Basin, Shandong Province, China. The seaward boundary is obtained by converging hydraulic head fluctuations observed in drill holes with calculated values, and the aquifer parameters in the extending zone are estimated. The impacts of aquifer roof length and aquifer parameters on the fluctuation of tidal groundwater are studied. It is concluded that the length of the aquifer roof extending under the sea should correspond with certain aquifer parameters in the extrapolation zone. Therefore, the seaward boundary determined from tidal-effect information is the equivalent boundary in hydrodynamic characteristics rather than the true boundary of the confined aquifer Les sujets principaux des études d'instrusion saline dans les aquifères confinés en zone côtière sont la prédiction de la position de l'interface entre l'eau salée et l'eau fraîche, qui peut être déterminée à partir de l'extention du toit de l'aquifère sous la mer. Les enregistrements des niveaux des eaux souterraines influencés par les marées peuvent être utilisés pour préciser les conditions hydrologiques et déterminer les paramètres hydrauliques d'un aquifère possédant une extension sous la mer. Dans cet article, un modèle tridimensionnel comprenant des eaux souterraines de densité variable a été développé pour déterminer la longueur équivalente du toit d'un aquifère qui s'étend sous la mer à partir des données concernant les effets de marée sur les eaux souterraines dans le bassin de la rivière Jahe, dans la province de Shandong, Chine. La limite de salinité est déterminée en faisant converger les fluctuations des hauteurs piézométriques avec les valeurs calculées, et les paramètres de l'aquifère sont estimés dans la zone s'étendant sous la mer. L'incidence de la longueur de l'aquifère sous la mer sur les fluctuations des niveaux est étudiée. On en conclut que la longueur du toit de l'aquifère sous la mer peut correspondre à certains aquifères paramètres dans la zone d'extrapolation. Par conséquent, la limite de salinité déterminée à partir des effets de marée est l'équivalent d'une limite hydrodynamique plutôt que la véritable limite de l'aquifère. El principal objetivo de los estudios sobre intrusiones de agua salada en acuíferos costeros confinados es predecir la posición de la interfase agua dulce-agua salada, la cual puede determinarse a partir de la longitud del techo del acuífero que se extiende por debajo del mar. Los registros de niveles de agua subterránea afectados por las mareas puede utilizarse para inferir las condiciones hidrológicas y determinar los parámetros hidráulicos de un acuífero que se extiende por debajo del mar. En este artículo se ha desarrollado un modelo de flujo tri-dimensional de agua subterránea de densidad variable para determinar la longitud del techo equivalente de un acuífero que se extiende por debajo del mar a partir de datos, afectados por la marea, de niveles de agua subterránea en la Cuenca del Río Jahe, Provincia Shandong, China. El límite hacia el océano se obtiene por convergencia de fluctuaciones de presiones hidráulicas observadas en pozos con valores calculados, y se estiman los parámetros del acuífero en la zona extendida. Se estudian los impactos de la longitud del techo del acuífero y los parámetros del acuífero en la fluctuación del agua subterránea afectada por las mareas. Se concluye que la longitud del techo del acuífero que se extiende por debajo del mar debería corresponder con ciertos parámetros del acuífero en la zona de extrapolación. Por lo tanto, el límite hacia el océano determinado a partir de información de efectos de marea es el límite equivalente en características hidrodinámicas más que el límite real del acuífero confinado.

Evaluation of three aging techniques and back-calculated growth for introduced Blue Catfish from Lake Oconee, Georgia

USGS Publications Warehouse

Homer, Michael D.; Peterson, James T.; Jennings, Cecil A.

2015-01-01

Back-calculation of length-at-age from otoliths and spines is a common technique employed in fisheries biology, but few studies have compared the precision of data collected with this method for catfish populations. We compared precision of back-calculated lengths-at-age for an introducedIctalurus furcatus (Blue Catfish) population among 3 commonly used cross-sectioning techniques. We used gillnets to collect Blue Catfish (n = 153) from Lake Oconee, GA. We estimated ages from a basal recess, articulating process, and otolith cross-section from each fish. We employed the Frasier-Lee method to back-calculate length-at-age for each fish, and compared the precision of back-calculated lengths among techniques using hierarchical linear models. Precision in age assignments was highest for otoliths (83.5%) and lowest for basal recesses (71.4%). Back-calculated lengths were variable among fish ages 1–3 for the techniques compared; otoliths and basal recesses yielded variable lengths at age 8. We concluded that otoliths and articulating processes are adequate for age estimation of Blue Catfish.

The concomitant effects of phrase length and informational content in sentence comprehension.

PubMed

Thornton, R; MacDonald, M C; Arnold, J E

2000-03-01

Recent evidence suggests that phrase length plays a crucial role in modification ambiguities. Using a self-paced reading task, we extended these results by examining the additional pragmatic effects that length manipulations may exert. The results demonstrate that length not only modulates modification preferences directly, but that it also necessarily changes the informational content of a sentence, which itself affects modification preferences. Our findings suggest that the same length manipulation affects multiple sources of constraints, both structural and pragmatic, which can each exert differing effects on processing.

High resolution signal-processing method for extrinsic Fabry-Perot interferometric sensors

NASA Astrophysics Data System (ADS)

Xie, Jiehui; Wang, Fuyin; Pan, Yao; Wang, Junjie; Hu, Zhengliang; Hu, Yongming

2015-03-01

In this paper, a signal-processing method for optical fiber extrinsic Fabry-Perot interferometric sensors is presented. It achieves both high resolution and absolute measurement of the dynamic change of cavity length with low sampling points in wavelength domain. In order to improve the demodulation accuracy, the reflected interference spectrum is cleared by Discrete Wavelet Transform and adjusted by the Hilbert transform. Then the cavity length is interrogated by the cross correlation algorithm. The continuous tests show the resolution of cavity length is only 36.7 pm. Moreover, the corresponding resolution of cavity length is only 1 pm on the low frequency range below 420 Hz, and the corresponding power spectrum shows the possibility of detecting the ultra-low frequency signals based on spectra detection.

The primacy model: a new model of immediate serial recall.

PubMed

Page, M P; Norris, D

1998-10-01

A new model of immediate serial recall is presented: the primacy model. The primacy model stores order information by means of the assumption that the strength of activation of successive list items decreases across list position to form a primacy gradient. Ordered recall is supported by a repeated cycle of operations involving a noisy choice of the most active item followed by suppression of the chosen item. Word-length and list-length effects are attributed to a decay process that occurs both during input, when effective rehearsal is prevented, and during output. The phonological similarity effect is attributed to a second stage of processing at which phonological confusions occur. The primacy model produces accurate simulations of the effects of word length, list length, and phonological similarity.

Retrieval of long and short lists from long term memory: a functional magnetic resonance imaging study with human subjects.

PubMed

Zysset, S; Müller, K; Lehmann, C; Thöne-Otto, A I; von Cramon, D Y

2001-11-13

Previous studies have shown that reaction time in an item-recognition task with both short and long lists is a quadratic function of list length. This suggests that either different memory retrieval processes are implied for short and long lists or an adaptive process is involved. An event-related functional magnetic resonance imaging study with nine subjects and list lengths varying between 3 and 18 words was conducted to identify the underlying neuronal structures of retrieval from long and short lists. For the retrieval and processing of word-lists a single fronto-parietal network, including premotor, left prefrontal, left precuneal and left parietal regions, was activated. With increasing list length, no additional regions became involved in retrieving information from long-term memory, suggesting that not necessarily different, but highly adaptive retrieval processes are involved.

Testing a model of componential processing of multi-symbol numbers-evidence from measurement units.

PubMed

Huber, Stefan; Bahnmueller, Julia; Klein, Elise; Moeller, Korbinian

2015-10-01

Research on numerical cognition has addressed the processing of nonsymbolic quantities and symbolic digits extensively. However, magnitude processing of measurement units is still a neglected topic in numerical cognition research. Hence, we investigated the processing of measurement units to evaluate whether typical effects of multi-digit number processing such as the compatibility effect, the string length congruity effect, and the distance effect are also present for measurement units. In three experiments, participants had to single out the larger one of two physical quantities (e.g., lengths). In Experiment 1, the compatibility of number and measurement unit (compatible: 3 mm_6 cm with 3 < 6 and mm < cm; incompatible: 3 cm_6 mm with 3 < 6 but cm > mm) as well as string length congruity (congruent: 1 m_2 km with m < km and 2 < 3 characters; incongruent: 2 mm_1 m with mm < m, but 3 > 2 characters) were manipulated. We observed reliable compatibility effects with prolonged reaction times (RT) for incompatible trials. Moreover, a string length congruity effect was present in RT with longer RT for incongruent trials. Experiments 2 and 3 served as control experiments showing that compatibility effects persist when controlling for holistic distance and that a distance effect for measurement units exists. Our findings indicate that numbers and measurement units are processed in a componential manner and thus highlight that processing characteristics of multi-digit numbers generalize to measurement units. Thereby, our data lend further support to the recently proposed generalized model of componential multi-symbol number processing.

Relative contributions of neutral and non-neutral processes to clinal variation in calyx lobe length in the series Sakawanum (Asarum: Aristolochiaceae).

PubMed

Takahashi, Daiki; Teramine, Tsutomu; Sakaguchi, Shota; Setoguchi, Hiroaki

2018-01-25

Clines, the gradual variation in measurable traits along a geographical axis, play a major role in evolution and can contribute to our understanding of the relative roles of selective and neutral process in trait variation. Using genetic and morphological analyses, the relative contributions of neutral and non-neutral processes were explored to infer the evolutionary history of species of the series Sakawanum (genus Asarum), which shows significant clinal variation in calyx lobe length. A total of 27 populations covering the natural geographical distribution of the series Sakawanum were sampled. Six nuclear microsatellite markers were used to investigate genetic structure and genetic diversity. The lengths of calyx lobes of multiple populations were measured to quantify their geographical and taxonomic differentiation. To detect the potential impact of selective pressure, morphological differentiation was compared with genetic differentiation (QCT-FST comparison). Average calyx lobe length of A. minamitanianum was 124.11 mm, while that of A. costatum was 13.80 mm. Though gradually changing along the geographical axis within series, calyx lobe lengths were significantly differentiated among the taxa. Genetic differentiation between taxa was low (FST = 0.099), but a significant geographical structure along the morphological cline was detected. Except for one taxon pair, pairwise QCT values were significantly higher than the neutral genetic measures of FST and G'ST. Divergent selection may have driven the calyx lobe length variation in series Sakawanum taxa, although the underlying mechanism is still not clear. The low genetic differentiation indicates recent divergence and/or gene flows between geographically close taxa. These neutral processes would also affect the clinal variation in calyx lobe lengths. Overall, this study implies the roles of population history and divergent selection in shaping the current cline of a flower trait in the series Sakawanum. © The Author(s) 2017. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Testing an Alternative Method for Estimating the Length of Fungal Hyphae Using Photomicrography and Image Processing.

PubMed

Shen, Qinhua; Kirschbaum, Miko U F; Hedley, Mike J; Camps Arbestain, Marta

2016-01-01

This study aimed to develop and test an unbiased and rapid methodology to estimate the length of external arbuscular mycorrhizal fungal (AMF) hyphae in soil. The traditional visual gridline intersection (VGI) method, which consists in a direct visual examination of the intersections of hyphae with gridlines on a microscope eyepiece after aqueous extraction, membrane-filtration, and staining (e.g., with trypan blue), was refined. For this, (i) images of the stained hyphae were taken by using a digital photomicrography technique to avoid the use of the microscope and the method was referred to as "digital gridline intersection" (DGI) method; and (ii), the images taken in (i) were processed and the hyphal length was measured by using ImageJ software, referred to as the "photomicrography-ImageJ processing" (PIP) method. The DGI and PIP methods were tested using known grade lengths of possum fur. Then they were applied to measure the hyphal lengths in soils with contrasting phosphorus (P) fertility status. Linear regressions were obtained between the known lengths (Lknown) of possum fur and the values determined by using either the DGI (LDGI) (LDGI = 0.37 + 0.97 × Lknown, r2 = 0.86) or PIP (LPIP) methods (LPIP = 0.33 + 1.01 × Lknown, r2 = 0.98). There were no significant (P > 0.05) differences between the LDGI and LPIP values. While both methods provided accurate estimation (slope of regression being 1.0), the PIP method was more precise, as reflected by a higher value of r2 and lower coefficients of variation. The average hyphal lengths (6.5-19.4 m g-1) obtained by the use of these methods were in the range of those typically reported in the literature (3-30 m g-1). Roots growing in P-deficient soil developed 2.5 times as many hyphae as roots growing in P-rich soil (17.4 vs 7.2 m g-1). These tests confirmed that the use of digital photomicrography in conjunction with either the grid-line intersection principle or image processing is a suitable method for the measurement of AMF hyphal lengths in soils for comparative investigations.

An Optical Study of Processes in Hydrogen Flame in a Tube

DTIC Science & Technology

2002-07-01

growth of the hydrogen- flame length with the hydrogen flow rate was observed, whereas for a turbulent hydrogen jet (Reynolds number Re > 104 [5]), the... flame length remained almost constant and varied only weakly with the flow rate of hydrogen. For a subsonic jet flow, flame images display an...There are some data in the literature which show how the diffusive- flame length varies with the rate of hydrogen flow [4, 7]. The length of a

Minimization of dependency length in written English.

PubMed

Temperley, David

2007-11-01

Gibson's Dependency Locality Theory (DLT) [Gibson, E. 1998. Linguistic complexity: locality of syntactic dependencies. Cognition, 68, 1-76; Gibson, E. 2000. The dependency locality theory: A distance-based theory of linguistic complexity. In A. Marantz, Y. Miyashita, & W. O'Neil (Eds.), Image, Language, Brain (pp. 95-126). Cambridge, MA: MIT Press.] proposes that the processing complexity of a sentence is related to the length of its syntactic dependencies: longer dependencies are more difficult to process. The DLT is supported by a variety of phenomena in language comprehension. This raises the question: Does language production reflect a preference for shorter dependencies as well? I examine this question in a corpus study of written English, using the Wall Street Journal portion of the Penn Treebank. The DLT makes a number of predictions regarding the length of constituents in different contexts; these predictions were tested in a series of statistical tests. A number of findings support the theory: the greater length of subject noun phrases in inverted versus uninverted quotation constructions, the greater length of direct-object versus subject NPs, the greater length of postmodifying versus premodifying adverbial clauses, the greater length of relative-clause subjects within direct-object NPs versus subject NPs, the tendency towards "short-long" ordering of postmodifying adjuncts and coordinated conjuncts, and the shorter length of subject NPs (but not direct-object NPs) in clauses with premodifying adjuncts versus those without.

Investigation de l'anisotropie du gap supraconducteur dans les composes Ba(Fe(1-x)Co(x))2As2, Ba(1-x)K(x)Fe2As2, LiFeAs et Fe1-deltaTe(1-x)Se(x)

NASA Astrophysics Data System (ADS)

Reid, Jean-Philippe

ommaire La structure du gap supraconducteur et sa modulation sont intimement liees au potentiel d'interaction responsable de l'appariement des electrons d'un supraconducteur. Ainsi, l'etude de la structure du gap-SC et de sa modulation permettent de faire la lumiere sur la nature du mecanisme d'appariement des electrons. A cet egard, les resultats experimentaux des supraconducteurs a base de fer ne cadrent pas dans un seul ensemble, ce qui est en opposition au gap-SC universel des cuprates. Dans ce qui suit, nous presenterons une etude systematique du gap-SC pour plusieurs pnictides. En effet, en utilisant la conductivite thermique, une sonde directionnelle du gap-SC, nous avons ete en mesure de reveler la structure du gap-SC pour les composes suivants : Ba1-xKxFe 2As2, Ba(Fe1-xCo x)2As2, LiFeAs et Fe1-deltaTe 1-xSex. L'etude de ces quatre composes, de trois differentes familles structurales, a pu etablir un tableau partiel mais tres exhaustif de la structure du gap-SC de pnictides. En effet, tel qu'illustre dans cette these, ces quatre composes ne possedent aucun noeud dans leur structure du gap-SC a dopage optimal. Toutefois, a une concentration differente de celle optimale pour les composes K-Ba122 et Co-Ba122, des noeuds apparaissent sur la surface de Fermi, aux extremites 'du dome supraconducteur. Ceci suggere fortement que, pour ces composes, la presence de noeuds sur la surface de Fermi est nuisible a la phase supraconductrice. Mots-cles: Supraconducteurs a base de fer, Pnictides, Structure du gap supraconducteur, Conductivite thermique

L'effet de p53 sur la radiosensibilité des cellules humaines normales et cancéreuses

NASA Astrophysics Data System (ADS)

Little, J. B.; Li, C. Y.; Nagasawa, H.; Huang, H.

1998-04-01

The radiosensitivity of normal human fibroblasts in p53 dependent and associated with the loss of cells from the cycling population as the result of an irreversible G1 arrest; cells lacking normal p53 function show no arrest and are more radioresistant. Under conditions in which the repair potentially lethal radiation damage is facilitated, the fraction of cells arrested in G1 is reduced and survival is enhanced. The response of human tumor cells differs significantly. The radiation-induced G1 arrest is minimal or absent in p53+ tumor cells, and loss of normal p53 function has no consistent effect on their radiosensitivity. These results suggest that p53 status may not be a useful predictive marker for the response of human solid tumors to radiation therapy. La radiosensibilité des fibroblastes diploïdes humains est liée à l'expression de p53, et à la perte de cellules en cycle résultant d'un arrêt irréversible en phase G1 ; dans les cellules n'ayant pas une fonction p53 normale, on ne constate aucun arrêt, et elles sont plus radio-résistantes. Dans des conditions favorables à la réparation de lésions potentiellement léthales dues à l'irradiation, la proportion de cellules bloquées en phase G1 baisse, et les chances de survie sont accrues. Bien différente est la réaction des cellules cancéreuses humaines. Le blocage par irradiation en phase G1 est minime ou inexistant dans les cellules cancéreuses p53^+, et la perte de la fonction normale p53 n'a pas d'effet constant sur leur radiosensibilité. Ces résultats laissent penser que l'expression de p53 n'est pas un indice fiable permettant de prévoir la réaction des tumeurs solides à la radiothérapie.

Real-time particle size analysis using focused beam reflectance measurement as a process analytical technology tool for a continuous granulation-drying-milling process.

PubMed

Kumar, Vijay; Taylor, Michael K; Mehrotra, Amit; Stagner, William C

2013-06-01

Focused beam reflectance measurement (FBRM) was used as a process analytical technology tool to perform inline real-time particle size analysis of a proprietary granulation manufactured using a continuous twin-screw granulation-drying-milling process. A significant relationship between D20, D50, and D80 length-weighted chord length and sieve particle size was observed with a p value of <0.0001 and R(2) of 0.886. A central composite response surface statistical design was used to evaluate the effect of granulator screw speed and Comil® impeller speed on the length-weighted chord length distribution (CLD) and particle size distribution (PSD) determined by FBRM and nested sieve analysis, respectively. The effect of granulator speed and mill speed on bulk density, tapped density, Compressibility Index, and Flowability Index were also investigated. An inline FBRM probe placed below the Comil-generated chord lengths and CLD data at designated times. The collection of the milled samples for sieve analysis and PSD evaluation were coordinated with the timing of the FBRM determinations. Both FBRM and sieve analysis resulted in similar bimodal distributions for all ten manufactured batches studied. Within the experimental space studied, the granulator screw speed (650-850 rpm) and Comil® impeller speed (1,000-2,000 rpm) did not have a significant effect on CLD, PSD, bulk density, tapped density, Compressibility Index, and Flowability Index (p value > 0.05).

The processing of spatial information in short-term memory: insights from eye tracking the path length effect.

PubMed

Guérard, Katherine; Tremblay, Sébastien; Saint-Aubin, Jean

2009-10-01

Serial memory for spatial locations increases as the distance between successive stimuli locations decreases. This effect, known as the path length effect [Parmentier, F. B. R., Elford, G., & Maybery, M. T. (2005). Transitional information in spatial serial memory: Path characteristics affect recall performance. Journal of Experimental Psychology: Learning, Memory & Cognition, 31, 412-427], was investigated in a systematic manner using eye tracking and interference procedures to explore the mechanisms responsible for the processing of spatial information. In Experiment 1, eye movements were monitored during a spatial serial recall task--in which the participants have to remember the location of spatially and temporally separated dots on the screen. In the experimental conditions, eye movements were suppressed by requiring participants to incessantly move their eyes between irrelevant locations. Ocular suppression abolished the path length effect whether eye movements were prevented during item presentation or during a 7s retention interval. In Experiment 2, articulatory suppression was combined with a spatial serial recall task. Although articulatory suppression impaired performance, it did not alter the path length effect. Our results suggest that rehearsal plays a key role in serial memory for spatial information, though the effect of path length seems to involve other processes located at encoding, such as the time spent fixating each location and perceptual organization.

Improved method of step length estimation based on inverted pendulum model.

PubMed

Zhao, Qi; Zhang, Boxue; Wang, Jingjing; Feng, Wenquan; Jia, Wenyan; Sun, Mingui

2017-04-01

Step length estimation is an important issue in areas such as gait analysis, sport training, or pedestrian localization. In this article, we estimate the step length of walking using a waist-worn wearable computer named eButton. Motion sensors within this device are used to record body movement from the trunk instead of extremities. Two signal-processing techniques are applied to our algorithm design. The direction cosine matrix transforms vertical acceleration from the device coordinates to the topocentric coordinates. The empirical mode decomposition is used to remove the zero- and first-order skew effects resulting from an integration process. Our experimental results show that our algorithm performs well in step length estimation. The effectiveness of the direction cosine matrix algorithm is improved from 1.69% to 3.56% while the walking speed increased.

Mature clustered, regularly interspaced, short palindromic repeats RNA (crRNA) length is measured by a ruler mechanism anchored at the precursor processing site.

PubMed

Hatoum-Aslan, Asma; Maniv, Inbal; Marraffini, Luciano A

2011-12-27

Precise RNA processing is fundamental to all small RNA-mediated interference pathways. In prokaryotes, clustered, regularly interspaced, short palindromic repeats (CRISPR) loci encode small CRISPR RNAs (crRNAs) that protect against invasive genetic elements by antisense targeting. CRISPR loci are transcribed as a long precursor that is cleaved within repeat sequences by CRISPR-associated (Cas) proteins. In many organisms, this primary processing generates crRNA intermediates that are subject to additional nucleolytic trimming to render mature crRNAs of specific lengths. The molecular mechanisms underlying this maturation event remain poorly understood. Here, we defined the genetic requirements for crRNA primary processing and maturation in Staphylococcus epidermidis. We show that changes in the position of the primary processing site result in extended or diminished maturation to generate mature crRNAs of constant length. These results indicate that crRNA maturation occurs by a ruler mechanism anchored at the primary processing site. We also show that maturation is mediated by specific cas genes distinct from those genes involved in primary processing, showing that this event is directed by CRISPR/Cas loci.

Critical fiber length technique for composite manufacturing processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sivley, G.N.; Vandiver, T.L.; Dougherty, N.S.

1996-12-31

An improved injection technique for composite structures has been cooperatively developed by the U.S. Army Missile Command (MICOM) and Rockwell International (RI). This process simultaneously injects chopped fiberglass fibers and an epoxy resin matrix into a mold. Four injection techniques: (1){open_quotes}Little Willie{close_quotes} RTM system, (2) Pressure Vat system, (3) Pressure Vat system with vacuum assistance, and (4) Injection gun system, were investigated for use with a 304.8 mm x 304.8 mm x 5.08 mm (12 in x 12 in x 0.2 in) flat plaque mold. The driving factors in the process optimization included: fiber length, fiber weight, matrix viscosity, injectionmore » pressure, flow rate, and tool design. At fiber weights higher than 30 percent, the injection gun appears to have advantages over the other systems investigated. Results of an experimental investigation are reviewed in this paper. The investigation of injection techniques is the initial part of the research involved in a developing process, {open_quotes}Critical Fiber Length Technique{close_quotes}. This process will use the data collected in injection experiment along with mechanical properties derived from coupon test data to be incorporated into a composite material design code. The {open_quotes}Critical Fiber Length Technique{close_quotes} is part of a Cooperative Research and Development Agreement (CRADA) established in 1994 between MICOM and RI.« less

Manipulation of length and lexicality localizes the functional neuroanatomy of phonological processing in adult readers.

PubMed

Church, Jessica A; Balota, David A; Petersen, Steven E; Schlaggar, Bradley L

2011-06-01

In a previous study of single word reading, regions in the left supramarginal gyrus and left angular gyrus showed positive BOLD activity in children but significantly less activity in adults for high-frequency words [Church, J. A., Coalson, R. S., Lugar, H. M., Petersen, S. E., & Schlaggar, B. L. A developmental fMRI study of reading and repetition reveals changes in phonological and visual mechanisms over age. Cerebral Cortex, 18, 2054-2065, 2008]. This developmental decrease may reflect decreased reliance on phonological processing for familiar stimuli in adults. Therefore, in the present study, variables thought to influence phonological demand (string length and lexicality) were manipulated. Length and lexicality effects in the brain were explored using both ROI and whole-brain approaches. In the ROI analysis, the supramarginal and angular regions from the previous study were applied to this study. The supramarginal region showed a significant positive effect of length, consistent with a role in phonological processing, whereas the angular region showed only negative deflections from baseline with a strong effect of lexicality and other weaker effects. At the whole-brain level, varying effects of length and lexicality and their interactions were observed in 85 regions throughout the brain. The application of hierarchical clustering analysis to the BOLD time course data derived from these regions revealed seven clusters, with potentially revealing anatomical locations. Of note, a left angular gyrus region was the sole constituent of one cluster. Taken together, these findings in adult readers (1) provide support for a widespread set of brain regions affected by lexical variables, (2) corroborate a role for phonological processing in the left supramarginal gyrus, and (3) do not support a strong role for phonological processing in the left angular gyrus.

Size-tunable synthesis of SiO(2) nanotubes via a simple in situ templatelike process.

PubMed

Shen, Guozhen; Bando, Yoshio; Golberg, Dmitri

2006-11-23

SiO(2) nanotubes with tunable diameters and lengths have been successfully synthesized via a simple in situ templatelike process by thermal evaporation of SiO, ZnS, and GaN in a vertical induction furnace. The structure and morphologies were systematically investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectrometry. Studies found that both the diameters and lengths of the SiO(2) nanotubes can be effectively tuned by simply changing the reaction temperatures. The range of changes was from 30 nm (diameter) and several hundred micrometers (length) at 1450 degrees C to 100 nm (diameter) and 2-10 micrometers (length) at 1300 degrees C. Varying some other experimental parameters results in the formation of additional SiO(2)-based nanostructures, such as core-shell ZnS-SiO(2) nanocables, ZnS nanoparticle filled SiO(2) nanotubes, and fluffy SiO(2) spheres. Based on the observations, an in situ templatelike process was proposed to explain the possible growth mechanism.

Development of Grading Systems for Short-Length Lumber

Treesearch

Eugene M. Wengert; Robert W. Rice; James G. Schroeder

1987-01-01

The abundance of low grade hardwood timber and a shortage of high grade timber of many species has led to the examination of alternative processing methods for converting logs to lumber. However, present grading rules for short length lumber are not good predictors of the lumber's true value. A new method of grading short length lumber is proposed, with furniture...

Modeling the Length Effect: Specifying the Relation with Visual and Phonological Correlates of Reading

ERIC Educational Resources Information Center

van den Boer, Madelon; de Jong, Peter F.; Haentjens-van Meeteren, Marleen M.

2013-01-01

Beginning readers' reading latencies increase as words become longer. This length effect is believed to be a marker of a serial reading process. We examined the effects of visual and phonological skills on the length effect. Participants were 184 second-grade children who read 3- to 5-letter words and nonwords. Results indicated that reading…

Effects of Liner Length and Attenuation on NASA Langley Impedance Eduction

NASA Technical Reports Server (NTRS)

Jones, M. G.; Watson, W. R.

2016-01-01

This study explores the effects of liner length and attenuation on the CHE (convected Helmholtz equation) impedance eduction method, in which the surface impedance of an acoustic liner is inferred through an iterative process based on repeated solutions to the convected Helmholtz equation. Wire mesh-over-honeycomb and perforate-over-honeycomb acoustic liners are tested in the NASA Langley Grazing Flow Impedance Tube, and the resultant data are processed using two impedance eduction methods. The first is the CHE method, and the second is a direct method (labeled the KT method) that uses the Kumaresan and Tufts algorithm to compute the impedance directly. The CHE method has been extensively used for acoustic liner evaluation, but experiences anomalous behavior under some test conditions. It is postulated that the anomalies are related to the liner length and/or attenuation. Since the KT method only employs data measured over the length of the liner, it is expected to be unaffected by liner length. A comparison of results achieved with the two impedance eduction methods is used to explore the interactive effects of liner length and attenuation on the CHE impedance eduction method.

Percentiles of the run-length distribution of the Exponentially Weighted Moving Average (EWMA) median chart

NASA Astrophysics Data System (ADS)

Tan, K. L.; Chong, Z. L.; Khoo, M. B. C.; Teoh, W. L.; Teh, S. Y.

2017-09-01

Quality control is crucial in a wide variety of fields, as it can help to satisfy customers’ needs and requirements by enhancing and improving the products and services to a superior quality level. The EWMA median chart was proposed as a useful alternative to the EWMA \\bar{X} chart because the median-type chart is robust against contamination, outliers or small deviation from the normality assumption compared to the traditional \\bar{X}-type chart. To provide a complete understanding of the run-length distribution, the percentiles of the run-length distribution should be investigated rather than depending solely on the average run length (ARL) performance measure. This is because interpretation depending on the ARL alone can be misleading, as the process mean shifts change according to the skewness and shape of the run-length distribution, varying from almost symmetric when the magnitude of the mean shift is large, to highly right-skewed when the process is in-control (IC) or slightly out-of-control (OOC). Before computing the percentiles of the run-length distribution, optimal parameters of the EWMA median chart will be obtained by minimizing the OOC ARL, while retaining the IC ARL at a desired value.

Thick Filament Length and Isoform Composition Determine Self-Organized Contractile Units in Actomyosin Bundles

PubMed Central

Thoresen, Todd; Lenz, Martin; Gardel, Margaret L.

2013-01-01

Diverse myosin II isoforms regulate contractility of actomyosin bundles in disparate physiological processes by variations in both motor mechanochemistry and the extent to which motors are clustered into thick filaments. Although the role of mechanochemistry is well appreciated, the extent to which thick filament length regulates actomyosin contractility is unknown. Here, we study the contractility of minimal actomyosin bundles formed in vitro by mixtures of F-actin and thick filaments of nonmuscle, smooth, and skeletal muscle myosin isoforms with varied length. Diverse myosin II isoforms guide the self-organization of distinct contractile units within in vitro bundles with shortening rates similar to those of in vivo myofibrils and stress fibers. The tendency to form contractile units increases with the thick filament length, resulting in a bundle shortening rate proportional to the length of constituent myosin thick filament. We develop a model that describes our data, providing a framework in which to understand how diverse myosin II isoforms regulate the contractile behaviors of disordered actomyosin bundles found in muscle and nonmuscle cells. These experiments provide insight into physiological processes that use dynamic regulation of thick filament length, such as smooth muscle contraction. PMID:23442916

Estimating age at a specified length from the von Bertalanffy growth function

USGS Publications Warehouse

Ogle, Derek H.; Isermann, Daniel A.

2017-01-01

Estimating the time required (i.e., age) for fish in a population to reach a specific length (e.g., legal harvest length) is useful for understanding population dynamics and simulating the potential effects of length-based harvest regulations. The age at which a population reaches a specific mean length is typically estimated by fitting a von Bertalanffy growth function to length-at-age data and then rearranging the best-fit equation to solve for age at the specified length. This process precludes the use of standard frequentist methods to compute confidence intervals and compare estimates of age at the specified length among populations. We provide a parameterization of the von Bertalanffy growth function that has age at a specified length as a parameter. With this parameterization, age at a specified length is directly estimated, and standard methods can be used to construct confidence intervals and make among-group comparisons for this parameter. We demonstrate use of the new parameterization with two data sets.

Statistical modelling for precision agriculture: A case study in optimal environmental schedules for Agaricus Bisporus production via variable domain functional regression.

PubMed

Panayi, Efstathios; Peters, Gareth W; Kyriakides, George

2017-01-01

Quantifying the effects of environmental factors over the duration of the growing process on Agaricus Bisporus (button mushroom) yields has been difficult, as common functional data analysis approaches require fixed length functional data. The data available from commercial growers, however, is of variable duration, due to commercial considerations. We employ a recently proposed regression technique termed Variable-Domain Functional Regression in order to be able to accommodate these irregular-length datasets. In this way, we are able to quantify the contribution of covariates such as temperature, humidity and water spraying volumes across the growing process, and for different lengths of growing processes. Our results indicate that optimal oxygen and temperature levels vary across the growing cycle and we propose environmental schedules for these covariates to optimise overall yields.

Statistical modelling for precision agriculture: A case study in optimal environmental schedules for Agaricus Bisporus production via variable domain functional regression

PubMed Central

Panayi, Efstathios; Kyriakides, George

2017-01-01

Quantifying the effects of environmental factors over the duration of the growing process on Agaricus Bisporus (button mushroom) yields has been difficult, as common functional data analysis approaches require fixed length functional data. The data available from commercial growers, however, is of variable duration, due to commercial considerations. We employ a recently proposed regression technique termed Variable-Domain Functional Regression in order to be able to accommodate these irregular-length datasets. In this way, we are able to quantify the contribution of covariates such as temperature, humidity and water spraying volumes across the growing process, and for different lengths of growing processes. Our results indicate that optimal oxygen and temperature levels vary across the growing cycle and we propose environmental schedules for these covariates to optimise overall yields. PMID:28961254

Slower Perception Followed by Faster Lexical Decision in Longer Words: A Diffusion Model Analysis

PubMed Central

Oganian, Yulia; Froehlich, Eva; Schlickeiser, Ulrike; Hofmann, Markus J.; Heekeren, Hauke R.; Jacobs, Arthur M.

2016-01-01

Effects of stimulus length on reaction times (RTs) in the lexical decision task are the topic of extensive research. While slower RTs are consistently found for longer pseudo-words, a finding coined the word length effect (WLE), some studies found no effects for words, and yet others reported faster RTs for longer words. Moreover, the WLE depends on the orthographic transparency of a language, with larger effects in more transparent orthographies. Here we investigate processes underlying the WLE in lexical decision in German-English bilinguals using a diffusion model (DM) analysis, which we compared to a linear regression approach. In the DM analysis, RT-accuracy distributions are characterized using parameters that reflect latent sub-processes, in particular evidence accumulation and decision-independent perceptual encoding, instead of typical parameters such as mean RT and accuracy. The regression approach showed a decrease in RTs with length for pseudo-words, but no length effect for words. However, DM analysis revealed that the null effect for words resulted from opposing effects of length on perceptual encoding and rate of evidence accumulation. Perceptual encoding times increased with length for words and pseudo-words, whereas the rate of evidence accumulation increased with length for real words but decreased for pseudo-words. A comparison between DM parameters in German and English suggested that orthographic transparency affects perceptual encoding, whereas effects of length on evidence accumulation are likely to reflect contextual information and the increase in available perceptual evidence with length. These opposing effects may account for the inconsistent findings on WLEs. PMID:26779075

Slower Perception Followed by Faster Lexical Decision in Longer Words: A Diffusion Model Analysis.

PubMed

Oganian, Yulia; Froehlich, Eva; Schlickeiser, Ulrike; Hofmann, Markus J; Heekeren, Hauke R; Jacobs, Arthur M

2015-01-01

Effects of stimulus length on reaction times (RTs) in the lexical decision task are the topic of extensive research. While slower RTs are consistently found for longer pseudo-words, a finding coined the word length effect (WLE), some studies found no effects for words, and yet others reported faster RTs for longer words. Moreover, the WLE depends on the orthographic transparency of a language, with larger effects in more transparent orthographies. Here we investigate processes underlying the WLE in lexical decision in German-English bilinguals using a diffusion model (DM) analysis, which we compared to a linear regression approach. In the DM analysis, RT-accuracy distributions are characterized using parameters that reflect latent sub-processes, in particular evidence accumulation and decision-independent perceptual encoding, instead of typical parameters such as mean RT and accuracy. The regression approach showed a decrease in RTs with length for pseudo-words, but no length effect for words. However, DM analysis revealed that the null effect for words resulted from opposing effects of length on perceptual encoding and rate of evidence accumulation. Perceptual encoding times increased with length for words and pseudo-words, whereas the rate of evidence accumulation increased with length for real words but decreased for pseudo-words. A comparison between DM parameters in German and English suggested that orthographic transparency affects perceptual encoding, whereas effects of length on evidence accumulation are likely to reflect contextual information and the increase in available perceptual evidence with length. These opposing effects may account for the inconsistent findings on WLEs.

Traumatic stress: effects on the brain

PubMed Central

Bremner, J. Douglas

2006-01-01

Brain areas implicated in the stress response include the amygdala, hippocampus, and prefrontal cortex. Traumatic stress can be associated with lasting changes in these brain areas. Traumatic stress is associated with increased cortisol and norepinephrine responses to subsequent stressors. Antidepressants have effets on the hippocampus that counteract the effects of stress. Findings from animal studies have been extended to patients with post-traumatic stress disorder (PTSD) showing smaller hippocampal and anterior cingulate volumes, increased amygdala function, and decreased medial prefrontal/anterior cingulate function. In addition, patients with PTSD show increased cortisol and norepinephrine responses to stress. Treatments that are efficacious for PTSD show a promotion of neurogenesis in animal studies, as well as promotion of memory and increased hippocampal volume in PTSD. PMID:17290802

The World Congress of Paediatric Cardiology and Cardiac Surgery: a short factual history by Jane Somerville.

PubMed

Somerville, Jane

2012-12-01

The World Congress of Paediatric Cardiology and Cardiac Surgery has survived with minimal assets and simple organisation. Each congress is special, taking on the humour, flavour, and culture of the organising country. It is hard work for a few organisers and money is hard to raise. The steering committee works closely, fairly, and successfully, and even though accused of being secretive and effete that does not matter. It is efficient and produces successful, happy world congresses, where all involved with the speciality are welcome. With so many "grown-ups" with congenital heart disease, it is no longer just a paediatric problem - maybe the name of this congress must change again. Regardless, the flag must fly on.

Evaluating Multispectral Snowpack Reflectivity With Changing Snow Correlation Lengths

NASA Technical Reports Server (NTRS)

Kang, Do Hyuk; Barros, Ana P.; Kim, Edward J.

2016-01-01

This study investigates the sensitivity of multispectral reflectivity to changing snow correlation lengths. Matzler's ice-lamellae radiative transfer model was implemented and tested to evaluate the reflectivity of snow correlation lengths at multiple frequencies from the ultraviolet (UV) to the microwave bands. The model reveals that, in the UV to infrared (IR) frequency range, the reflectivity and correlation length are inversely related, whereas reflectivity increases with snow correlation length in the microwave frequency range. The model further shows that the reflectivity behavior can be mainly attributed to scattering rather than absorption for shallow snowpacks. The largest scattering coefficients and reflectivity occur at very small correlation lengths (approximately 10(exp -5 m) for frequencies higher than the IR band. In the microwave range, the largest scattering coefficients are found at millimeter wavelengths. For validation purposes, the ice-lamella model is coupled with a multilayer snow physics model to characterize the reflectivity response of realistic snow hydrological processes. The evolution of the coupled model simulated reflectivities in both the visible and the microwave bands is consistent with satellite-based reflectivity observations in the same frequencies. The model results are also compared with colocated in situ snow correlation length measurements (Cold Land Processes Field Experiment 2002-2003). The analysis and evaluation of model results indicate that the coupled multifrequency radiative transfer and snow hydrology modeling system can be used as a forward operator in a data-assimilation framework to predict the status of snow physical properties, including snow correlation length.

Solidification in direct metal deposition by LENS processing

NASA Astrophysics Data System (ADS)

Hofmeister, William; Griffith, Michelle

2001-09-01

Thermal imaging and metallographic analysis were used to study Laser Engineered Net Shaping (LENS™) processing of 316 stainless steel and H13 tool steel. The cooling rates at the solid-liquid interface were measured over a range of conduction conditions. The length scale of the molten zone controls cooling rates during solidification in direct metal deposition. In LENS processing, the molten zone ranges from 0.5 mm in length to 1.5 mm, resulting in cooling rates at the solid-liquid interface ranging from 200 6,000 Ks-1.

Modeling the effects of argument length and validity on inductive and deductive reasoning.

PubMed

Rotello, Caren M; Heit, Evan

2009-09-01

In an effort to assess models of inductive reasoning and deductive reasoning, the authors, in 3 experiments, examined the effects of argument length and logical validity on evaluation of arguments. In Experiments 1a and 1b, participants were given either induction or deduction instructions for a common set of stimuli. Two distinct effects were observed: Induction judgments were more affected by argument length, and deduction judgments were more affected by validity. In Experiment 2, fluency was manipulated by displaying the materials in a low-contrast font, leading to increased sensitivity to logical validity. Several variants of 1-process and 2-process models of reasoning were assessed against the results. A 1-process model that assumed the same scale of argument strength underlies induction and deduction was not successful. A 2-process model that assumed separate, continuous informational dimensions of apparent deductive validity and associative strength gave the more successful account. (c) 2009 APA, all rights reserved.

Optical coherence tomography imaging based on non-harmonic analysis

NASA Astrophysics Data System (ADS)

Cao, Xu; Hirobayashi, Shigeki; Chong, Changho; Morosawa, Atsushi; Totsuka, Koki; Suzuki, Takuya

2009-11-01

A new processing technique called Non-Harmonic Analysis (NHA) is proposed for OCT imaging. Conventional Fourier-Domain OCT relies on the FFT calculation which depends on the window function and length. Axial resolution is counter proportional to the frame length of FFT that is limited by the swept range of the swept source in SS-OCT, or the pixel counts of CCD in SD-OCT degraded in FD-OCT. However, NHA process is intrinsically free from this trade-offs; NHA can resolve high frequency without being influenced by window function or frame length of sampled data. In this study, NHA process is explained and applied to OCT imaging and compared with OCT images based on FFT. In order to validate the benefit of NHA in OCT, we carried out OCT imaging based on NHA with the three different sample of onion-skin,human-skin and pig-eye. The results show that NHA process can realize practical image resolution that is equivalent to 100nm swept range only with less than half-reduced wavelength range.

FibrilJ: ImageJ plugin for fibrils' diameter and persistence length determination

NASA Astrophysics Data System (ADS)

Sokolov, P. A.; Belousov, M. V.; Bondarev, S. A.; Zhouravleva, G. A.; Kasyanenko, N. A.

2017-05-01

Application of microscopy to evaluate the morphology and size of filamentous proteins and amyloids requires new and creative approaches to simplify and automate the image processing. The estimation of mean values of fibrils diameter, length and bending stiffness on micrographs is a major challenge. For this purpose we developed an open-source FibrilJ plugin for the ImageJ/FiJi program. It automatically recognizes the fibrils on the surface of a mica, silicon, gold or formvar film and further analyzes them to calculate the distribution of fibrils by diameters, lengths and persistence lengths. The plugin has been validated by the processing of TEM images of fibrils formed by Sup35NM yeast protein and artificially created images of rod-shape objects with predefined parameters. Novel data obtained by SEM for Sup35NM protein fibrils immobilized on silicon and gold substrates are also presented and analyzed.

On the physics of electron ejection from laser-irradiated overdense plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thévenet, M.; Vincenti, H.; Faure, J.

2016-06-15

Using 1D and 2D PIC simulations, we describe and model the backward ejection of electron bunches when a laser pulse reflects off an overdense plasma with a short density gradient on its front side. The dependence on the laser intensity and gradient scale length is studied. It is found that during each laser period, the incident laser pulse generates a large charge-separation field, or plasma capacitor, which accelerates an attosecond bunch of electrons toward vacuum. This process is maximized for short gradient scale lengths and collapses when the gradient scale length is comparable to the laser wavelength. We develop amore » model that reproduces the electron dynamics and the dependence on laser intensity and gradient scale length. This process is shown to be strongly linked with high harmonic generation via the Relativistic Oscillating Mirror mechanism.« less

A biological inspired fuzzy adaptive window median filter (FAWMF) for enhancing DNA signal processing.

PubMed

Ahmad, Muneer; Jung, Low Tan; Bhuiyan, Al-Amin

2017-10-01

Digital signal processing techniques commonly employ fixed length window filters to process the signal contents. DNA signals differ in characteristics from common digital signals since they carry nucleotides as contents. The nucleotides own genetic code context and fuzzy behaviors due to their special structure and order in DNA strand. Employing conventional fixed length window filters for DNA signal processing produce spectral leakage and hence results in signal noise. A biological context aware adaptive window filter is required to process the DNA signals. This paper introduces a biological inspired fuzzy adaptive window median filter (FAWMF) which computes the fuzzy membership strength of nucleotides in each slide of window and filters nucleotides based on median filtering with a combination of s-shaped and z-shaped filters. Since coding regions cause 3-base periodicity by an unbalanced nucleotides' distribution producing a relatively high bias for nucleotides' usage, such fundamental characteristic of nucleotides has been exploited in FAWMF to suppress the signal noise. Along with adaptive response of FAWMF, a strong correlation between median nucleotides and the Π shaped filter was observed which produced enhanced discrimination between coding and non-coding regions contrary to fixed length conventional window filters. The proposed FAWMF attains a significant enhancement in coding regions identification i.e. 40% to 125% as compared to other conventional window filters tested over more than 250 benchmarked and randomly taken DNA datasets of different organisms. This study proves that conventional fixed length window filters applied to DNA signals do not achieve significant results since the nucleotides carry genetic code context. The proposed FAWMF algorithm is adaptive and outperforms significantly to process DNA signal contents. The algorithm applied to variety of DNA datasets produced noteworthy discrimination between coding and non-coding regions contrary to fixed window length conventional filters. Copyright © 2017 Elsevier B.V. All rights reserved.

Telomere length analysis.

PubMed

Canela, Andrés; Klatt, Peter; Blasco, María A

2007-01-01

Most somatic cells of long-lived species undergo telomere shortening throughout life. Critically short telomeres trigger loss of cell viability in tissues, which has been related to alteration of tissue function and loss of regenerative capabilities in aging and aging-related diseases. Hence, telomere length is an important biomarker for aging and can be used in the prognosis of aging diseases. These facts highlight the importance of developing methods for telomere length determination that can be employed to evaluate telomere length during the human aging process. Telomere length quantification methods have improved greatly in accuracy and sensitivity since the development of the conventional telomeric Southern blot. Here, we describe the different methodologies recently developed for telomere length quantification, as well as their potential applications for human aging studies.

The effects of lumber length on part yields in gang-rip-first rough mills

Treesearch

Peter C. Hamner; Brian H. Bond; Janice K. Wiedenbeck

2002-01-01

The lumber processed in most rough mills typically arrives from vendors in packages of random width boards with lengths ranging from 8 to 16 feet. However, little attention has been given to analyzing how differences in board lengths affect rough mill yield given varying part-prioritization strategies and cutting bill scenarios. The objective of this study was to...

The Neurotopography of Written Word Production: An fMRI Investigation of the Distribution of Sensitivity to Length and Frequency

ERIC Educational Resources Information Center

Rapp, Brenda; Dufor, Olivier

2011-01-01

This research is directed at charting the neurotopography of the component processes of the spelling system by using fMRI to identify the neural substrates that are sensitive to the factors of lexical frequency and word length. In spelling, word frequency effects index orthographic long-term memory whereas length effects, as measured by the number…

An Imaging System for Automated Characteristic Length Measurement of Debrisat Fragments

NASA Technical Reports Server (NTRS)

Moraguez, Mathew; Patankar, Kunal; Fitz-Coy, Norman; Liou, J.-C.; Sorge, Marlon; Cowardin, Heather; Opiela, John; Krisko, Paula H.

2015-01-01

The debris fragments generated by DebriSat's hypervelocity impact test are currently being processed and characterized through an effort of NASA and USAF. The debris characteristics will be used to update satellite breakup models. In particular, the physical dimensions of the debris fragments must be measured to provide characteristic lengths for use in these models. Calipers and commercial 3D scanners were considered as measurement options, but an automated imaging system was ultimately developed to measure debris fragments. By automating the entire process, the measurement results are made repeatable and the human factor associated with calipers and 3D scanning is eliminated. Unlike using calipers to measure, the imaging system obtains non-contact measurements to avoid damaging delicate fragments. Furthermore, this fully automated measurement system minimizes fragment handling, which reduces the potential for fragment damage during the characterization process. In addition, the imaging system reduces the time required to determine the characteristic length of the debris fragment. In this way, the imaging system can measure the tens of thousands of DebriSat fragments at a rate of about six minutes per fragment, compared to hours per fragment in NASA's current 3D scanning measurement approach. The imaging system utilizes a space carving algorithm to generate a 3D point cloud of the article being measured and a custom developed algorithm then extracts the characteristic length from the point cloud. This paper describes the measurement process, results, challenges, and future work of the imaging system used for automated characteristic length measurement of DebriSat fragments.

Risky family processes prospectively forecast shorter telomere length mediated through negative emotions.

PubMed

Brody, Gene H; Yu, Tianyi; Shalev, Idan

2017-05-01

This study was designed to examine prospective associations of risky family environments with subsequent levels of negative emotions and peripheral blood mononuclear cell telomere length (TL), a marker of cellular aging. A second purpose was to determine whether negative emotions mediate the hypothesized link between risky family processes and diminished telomere length. Participants were 293 adolescents (age 17 years at the first assessment) and their primary caregivers. Caregivers provided data on risky family processes when the youths were age 17 years, youths reported their negative emotions at age 18 years, and youths' TL was assayed from a blood sample at age 22 years. The results revealed that (a) risky family processes forecast heightened negative emotions (β = .316, p < .001) and diminished TL (β = -.199, p = .003) among youths, (b) higher levels of negative emotions forecast shorter TL (β = -.187, p = .012), and (c) negative emotions served as a mediator connecting risky family processes with diminished TL (indirect effect = -0.012, 95% CI [-0.036, -0.002]). These findings are consistent with the hypothesis that risky family processes presage premature cellular aging through effects on negative emotions, with potential implications for lifelong health. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Concrete Crack Identification Using a UAV Incorporating Hybrid Image Processing.

PubMed

Kim, Hyunjun; Lee, Junhwa; Ahn, Eunjong; Cho, Soojin; Shin, Myoungsu; Sim, Sung-Han

2017-09-07

Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV) technologies combined with digital image processing have recently been applied to crack assessment to overcome the drawbacks of manual visual inspection. However, identification of crack information in terms of width and length has not been fully explored in the UAV-based applications, because of the absence of distance measurement and tailored image processing. This paper presents a crack identification strategy that combines hybrid image processing with UAV technology. Equipped with a camera, an ultrasonic displacement sensor, and a WiFi module, the system provides the image of cracks and the associated working distance from a target structure on demand. The obtained information is subsequently processed by hybrid image binarization to estimate the crack width accurately while minimizing the loss of the crack length information. The proposed system has shown to successfully measure cracks thicker than 0.1 mm with the maximum length estimation error of 7.3%.

Risky Family Processes Prospectively Forecast Shorter Telomere Length Mediated through Negative Emotions

PubMed Central

Brody, Gene H.; Yu, Tianyi; Shalev, Idan

2016-01-01

Objective This study was designed to examine prospective associations of risky family environments with subsequent levels of negative emotions and peripheral blood mononuclear cell telomere length (TL), a marker of cellular aging. A second purpose was to determine whether negative emotions mediate the hypothesized link between risky family processes and diminished telomere length. Methods Participants were 293 adolescents (age 17 years at the first assessment) and their primary caregivers. Caregivers provided data on risky family processes when the youths were age 17 years, youths reported their negative emotions at age 18 years, and youths’ TL was assayed from a blood sample at age 22 years. Results The results revealed that (a) risky family processes forecast heightened negative emotions (β = .316, p < .001) and diminished TL (β = −.199, p = .003) among youths, (b) higher levels of negative emotions forecast shorter TL (β = −.187, p = .012), and (c) negative emotions served as a mediator connecting risky family processes with diminished TL (indirect effect = −0.012, 95% CI [−0.036, −0.002]). Conclusions These findings are consistent with the hypothesis that risky family processes presage premature cellular aging through effects on negative emotions, with potential implications for lifelong health. PMID:27831704

Natural Length Scales Shape Liquid Phase Continuity in Unsaturated Flows

NASA Astrophysics Data System (ADS)

Assouline, S.; Lehmann, P. G.; Or, D.

2015-12-01

Unsaturated flows supporting soil evaporation and internal drainage play an important role in various hydrologic and climatic processes manifested at a wide range of scales. We study inherent natural length scales that govern these flow processes and constrain the spatial range of their representation by continuum models. These inherent length scales reflect interactions between intrinsic porous medium properties that affect liquid phase continuity, and the interplay among forces that drive and resist unsaturated flow. We have defined an intrinsic length scale for hydraulic continuity based on pore size distribution that controls soil evaporation dynamics (i.e., stage 1 to stage 2 transition). This simple metric may be used to delineate upper bounds for regional evaporative losses or the depth of soil-atmosphere interactions (in the absence of plants). A similar length scale governs the dynamics of internal redistribution towards attainment of field capacity, again through its effect on hydraulic continuity in the draining porous medium. The study provides a framework for guiding numerical and mathematical models for capillary flows across different scales considering the necessary conditions for coexistence of stationarity (REV), hydraulic continuity and intrinsic capillary gradients.

A Dual-Route Perspective on Brain Activation in Response to Visual Words: Evidence for a Length by Lexicality Interaction in the Visual Word Form Area (VWFA)

PubMed Central

Schurz, Matthias; Sturm, Denise; Richlan, Fabio; Kronbichler, Martin; Ladurner, Gunther; Wimmer, Heinz

2010-01-01

Based on our previous work, we expected the Visual Word Form Area (VWFA) in the left ventral visual pathway to be engaged by both whole-word recognition and by serial sublexical coding of letter strings. To examine this double function, a phonological lexical decision task (i.e., “Does xxx sound like an existing word?”) presented short and long letter strings of words, pseudohomophones, and pseudowords (e.g., Taxi, Taksi and Tazi). Main findings were that the length effect for words was limited to occipital regions and absent in the VWFA. In contrast, a marked length effect for pseudowords was found throughout the ventral visual pathway including the VWFA, as well as in regions presumably engaged by visual attention and silent-articulatory processes. The length by lexicality interaction on brain activation corresponds to well-established behavioral findings of a length by lexicality interaction on naming latencies and speaks for the engagement of the VWFA by both lexical and sublexical processes. PMID:19896538

A dual-route perspective on brain activation in response to visual words: evidence for a length by lexicality interaction in the visual word form area (VWFA).

PubMed

Schurz, Matthias; Sturm, Denise; Richlan, Fabio; Kronbichler, Martin; Ladurner, Gunther; Wimmer, Heinz

2010-02-01

Based on our previous work, we expected the Visual Word Form Area (VWFA) in the left ventral visual pathway to be engaged by both whole-word recognition and by serial sublexical coding of letter strings. To examine this double function, a phonological lexical decision task (i.e., "Does xxx sound like an existing word?") presented short and long letter strings of words, pseudohomophones, and pseudowords (e.g., Taxi, Taksi and Tazi). Main findings were that the length effect for words was limited to occipital regions and absent in the VWFA. In contrast, a marked length effect for pseudowords was found throughout the ventral visual pathway including the VWFA, as well as in regions presumably engaged by visual attention and silent-articulatory processes. The length by lexicality interaction on brain activation corresponds to well-established behavioral findings of a length by lexicality interaction on naming latencies and speaks for the engagement of the VWFA by both lexical and sublexical processes. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Measurement of minority carrier diffusion lengths in GaAs nanowires by a nanoprobe technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darbandi, A.; Watkins, S. P., E-mail: simonw@sfu.ca

Minority carrier diffusion lengths in both p-type and n-type GaAs nanowires were studied using electron beam induced current by means of a nanoprobe technique without lithographic processing. The diffusion lengths were determined for Au/GaAs rectifying junctions as well as axial p-n junctions. By incorporating a thin lattice-matched InGaP passivating shell, a 2-fold enhancement in the minority carrier diffusion lengths and one order of magnitude reduction in the surface recombination velocity were achieved.

Finite length Taylor Couette flow

NASA Technical Reports Server (NTRS)

Streett, C. L.; Hussaini, M. Y.

1987-01-01

Axisymmetric numerical solutions of the unsteady Navier-Stokes equations for flow between concentric rotating cylinders of finite length are obtained by a spectral collocation method. These representative results pertain to two-cell/one-cell exchange process, and are compared with recent experiments.

Effects of Varying Epoch Lengths, Wear Time Algorithms, and Activity Cut-Points on Estimates of Child Sedentary Behavior and Physical Activity from Accelerometer Data.

PubMed

Banda, Jorge A; Haydel, K Farish; Davila, Tania; Desai, Manisha; Bryson, Susan; Haskell, William L; Matheson, Donna; Robinson, Thomas N

2016-01-01

To examine the effects of accelerometer epoch lengths, wear time (WT) algorithms, and activity cut-points on estimates of WT, sedentary behavior (SB), and physical activity (PA). 268 7-11 year-olds with BMI ≥ 85th percentile for age and sex wore accelerometers on their right hips for 4-7 days. Data were processed and analyzed at epoch lengths of 1-, 5-, 10-, 15-, 30-, and 60-seconds. For each epoch length, WT minutes/day was determined using three common WT algorithms, and minutes/day and percent time spent in SB, light (LPA), moderate (MPA), and vigorous (VPA) PA were determined using five common activity cut-points. ANOVA tested differences in WT, SB, LPA, MPA, VPA, and MVPA when using the different epoch lengths, WT algorithms, and activity cut-points. WT minutes/day varied significantly by epoch length when using the NHANES WT algorithm (p < .0001), but did not vary significantly by epoch length when using the ≥ 20 minute consecutive zero or Choi WT algorithms. Minutes/day and percent time spent in SB, LPA, MPA, VPA, and MVPA varied significantly by epoch length for all sets of activity cut-points tested with all three WT algorithms (all p < .0001). Across all epoch lengths, minutes/day and percent time spent in SB, LPA, MPA, VPA, and MVPA also varied significantly across all sets of activity cut-points with all three WT algorithms (all p < .0001). The common practice of converting WT algorithms and activity cut-point definitions to match different epoch lengths may introduce significant errors. Estimates of SB and PA from studies that process and analyze data using different epoch lengths, WT algorithms, and/or activity cut-points are not comparable, potentially leading to very different results, interpretations, and conclusions, misleading research and public policy.

Establishment of a Method to Measure Length of the Ulnar Nerve and Standardize F-wave Values in Clinically Normal Beagles

PubMed Central

HIRASAWA, Shun; SHIMIZU, Miki; MARUI, Yuumi; KISHIMOTO, Miori; OKUNO, Seiichi

2014-01-01

We designed a new method of measuring the length of the ulnar nerve and determining standard values for F-wave parameters of the ulnar nerve in clinically normal beagles. Nerve length must be precisely measured to determine F-wave latency and conduction velocity. The length of the forelimb has served as the length of the ulnar nerve for F-wave assessments, but report indicates that F-wave latency is proportional to the length of the pathway traveled by nerve impulses. Therefore, we measured the surface distance from a stimulus point to the spinous process of the first thoracic vertebra (nerve length 1) and the anterior horn of the scapula (nerve length 2) as landmarks through the olecranon and the shoulder blade acromion. The correlation coefficients between the shortest F-wave latency and the length of nerves 1, 2 or the forelimb were 0.61, 0.7 and 0.58. Nerve length 2 generated the highest value. Furthermore, the anterior horn of the scapula was easily palpated in any dog regardless of well-fed body. We concluded that nerve length 2 was optimal for measuring the length of the ulnar nerve. PMID:25649942

Engineering Digestion: Multiscale Processes of Food Digestion.

PubMed

Bornhorst, Gail M; Gouseti, Ourania; Wickham, Martin S J; Bakalis, Serafim

2016-03-01

Food digestion is a complex, multiscale process that has recently become of interest to the food industry due to the developing links between food and health or disease. Food digestion can be studied by using either in vitro or in vivo models, each having certain advantages or disadvantages. The recent interest in food digestion has resulted in a large number of studies in this area, yet few have provided an in-depth, quantitative description of digestion processes. To provide a framework to develop these quantitative comparisons, a summary is given here between digestion processes and parallel unit operations in the food and chemical industry. Characterization parameters and phenomena are suggested for each step of digestion. In addition to the quantitative characterization of digestion processes, the multiscale aspect of digestion must also be considered. In both food systems and the gastrointestinal tract, multiple length scales are involved in food breakdown, mixing, absorption. These different length scales influence digestion processes independently as well as through interrelated mechanisms. To facilitate optimized development of functional food products, a multiscale, engineering approach may be taken to describe food digestion processes. A framework for this approach is described in this review, as well as examples that demonstrate the importance of process characterization as well as the multiple, interrelated length scales in the digestion process. © 2016 Institute of Food Technologists®

Improved cutback method measuring beat-length for high-birefringence optical fiber by fitting data of photoelectric signal

NASA Astrophysics Data System (ADS)

Shi, Zhi-Dong; Lin, Jian-Qiang; Bao, Huan-Huan; Liu, Shu; Xiang, Xue-Nong

2008-03-01

A photoelectric measurement system for measuring the beat length of birefringence fiber is set up including a set of rotating-wave-plate polarimeter using single photodiode. And two improved cutback methods suitable for measuring beat-length within millimeter range of high birefringence fiber are proposed through data processing technique. The cut length needs not to be restricted shorter than one centimeter so that the auto-cleaving machine is freely used, and no need to carefully operate the manually cleaving blade with low efficiency and poor success. The first method adopts the parameter-fitting to a saw-tooth function of tried beat length by the criterion of minimum square deviations, without special limitation on the cut length. The second method adopts linear-fitting in the divided length ranges, only restrict condition is the increment between different cut lengths less than one beat-length. For a section of holey high-birefringence fiber, we do experiments respectively by the two methods. The detecting error of beat-length is discussed and the advantage is compared.

Thick filament length and isoform composition determine self-organized contractile units in actomyosin bundles.

PubMed

Thoresen, Todd; Lenz, Martin; Gardel, Margaret L

2013-02-05

Diverse myosin II isoforms regulate contractility of actomyosin bundles in disparate physiological processes by variations in both motor mechanochemistry and the extent to which motors are clustered into thick filaments. Although the role of mechanochemistry is well appreciated, the extent to which thick filament length regulates actomyosin contractility is unknown. Here, we study the contractility of minimal actomyosin bundles formed in vitro by mixtures of F-actin and thick filaments of nonmuscle, smooth, and skeletal muscle myosin isoforms with varied length. Diverse myosin II isoforms guide the self-organization of distinct contractile units within in vitro bundles with shortening rates similar to those of in vivo myofibrils and stress fibers. The tendency to form contractile units increases with the thick filament length, resulting in a bundle shortening rate proportional to the length of constituent myosin thick filament. We develop a model that describes our data, providing a framework in which to understand how diverse myosin II isoforms regulate the contractile behaviors of disordered actomyosin bundles found in muscle and nonmuscle cells. These experiments provide insight into physiological processes that use dynamic regulation of thick filament length, such as smooth muscle contraction. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Influence of the power law index on the fiber breakage during injection molding by numerical simulations

NASA Astrophysics Data System (ADS)

Desplentere, Frederik; Six, Wim; Bonte, Hilde; Debrabandere, Eric

2013-04-01

In predictive engineering for polymer processes, the proper prediction of material microstructure from known processing conditions and constituent material properties is a critical step forward properly predicting bulk properties in the finished composite. Operating within the context of long-fiber thermoplastics (LFT, length > 15mm) this investigation concentrates on the influence of the power law index on the final fiber length distribution within the injection molded part. To realize this, the Autodesk Simulation Moldflow Insight Scandium 2013 software has been used. In this software, a fiber breakage algorithm is available from this release on. Using virtual material data with realistic viscosity levels allows to separate the influence of the power law index on the fiber breakage from the other material and process parameters. Applying standard settings for the fiber breakage parameters results in an obvious influence on the fiber length distribution through the thickness of the part and also as function of position in the part. Finally, the influence of the shear rate constant within the fiber breakage model has been investigated illustrating the possibility to fit the virtual fiber length distribution to the possible experimentally available data.

A multi-resolution analysis of lidar-DTMs to identify geomorphic processes from characteristic topographic length scales

NASA Astrophysics Data System (ADS)

Sangireddy, H.; Passalacqua, P.; Stark, C. P.

2013-12-01

Characteristic length scales are often present in topography, and they reflect the driving geomorphic processes. The wide availability of high resolution lidar Digital Terrain Models (DTMs) allows us to measure such characteristic scales, but new methods of topographic analysis are needed in order to do so. Here, we explore how transitions in probability distributions (pdfs) of topographic variables such as (log(area/slope)), defined as topoindex by Beven and Kirkby[1979], can be measured by Multi-Resolution Analysis (MRA) of lidar DTMs [Stark and Stark, 2001; Sangireddy et al.,2012] and used to infer dominant geomorphic processes such as non-linear diffusion and critical shear. We show this correlation between dominant geomorphic processes to characteristic length scales by comparing results from a landscape evolution model to natural landscapes. The landscape evolution model MARSSIM Howard[1994] includes components for modeling rock weathering, mass wasting by non-linear creep, detachment-limited channel erosion, and bedload sediment transport. We use MARSSIM to simulate steady state landscapes for a range of hillslope diffusivity and critical shear stresses. Using the MRA approach, we estimate modal values and inter-quartile ranges of slope, curvature, and topoindex as a function of resolution. We also construct pdfs at each resolution and identify and extract characteristic scale breaks. Following the approach of Tucker et al.,[2001], we measure the average length to channel from ridges, within the GeoNet framework developed by Passalacqua et al.,[2010] and compute pdfs for hillslope lengths at each scale defined in the MRA. We compare the hillslope diffusivity used in MARSSIM against inter-quartile ranges of topoindex and hillslope length scales, and observe power law relationships between the compared variables for simulated landscapes at steady state. We plot similar measures for natural landscapes and are able to qualitatively infer the dominant geomorphic processes. Also, we explore the variability in hillslope length scales as a function of hillslope diffusivity coefficients and critical shear stress in natural landscapes and show that we can infer signatures of dominant geomorphic processes by analyzing characteristic topographic length scales present in topography. References: Beven, K. and Kirkby, M. J.: A physically based variable contributing area model of basin hydrology, Hydrol. Sci. Bull., 24, 43-69, 1979 Howard, A. D. (1994). A detachment-limited model of drainage basin evolution.Water resources research, 30(7), 2261-2285. Passalacqua, P., Do Trung, T., Foufoula Georgiou, E., Sapiro, G., & Dietrich, W. E. (2010). A geometric framework for channel network extraction from lidar: Nonlinear diffusion and geodesic paths. Journal of Geophysical. Research: Earth Surface (2003-2012), 115(F1). Sangireddy, H., Passalacqua, P., Stark, C.P.(2012). Multi-resolution estimation of lidar-DTM surface flow metrics to identify characteristic topographic length scales, EP13C-0859: AGU Fall meeting 2012. Stark, C. P., & Stark, G. J. (2001). A channelization model of landscape evolution. American Journal of Science, 301(4-5), 486-512. Tucker, G. E., Catani, F., Rinaldo, A., & Bras, R. L. (2001). Statistical analysis of drainage density from digital terrain data. Geomorphology, 36(3), 187-202.

Fragmentation of cosmic-string loops

NASA Technical Reports Server (NTRS)

York, Thomas

1989-01-01

The fragmentation of cosmic string loops is discussed, and the results of a simulation of this process are presented. The simulation can evolve any of a large class of loops essentially exactly, including allowing fragments that collide to join together. Such reconnection enhances the production of small fragments, but not drastically. With or without reconnections, the fragmentation process produces a collection of nonself-intersecting loops whose typical length is on the order of the persistence length of the initial loop.

Concreteness effects in short-term memory: a test of the item-order hypothesis.

PubMed

Roche, Jaclynn; Tolan, G Anne; Tehan, Gerald

2011-12-01

The following experiments explore word length and concreteness effects in short-term memory within an item-order processing framework. This framework asserts order memory is better for those items that are relatively easy to process at the item level. However, words that are difficult to process benefit at the item level for increased attention/resources being applied. The prediction of the model is that differential item and order processing can be detected in episodic tasks that differ in the degree to which item or order memory are required by the task. The item-order account has been applied to the word length effect such that there is a short word advantage in serial recall but a long word advantage in item recognition. The current experiment considered the possibility that concreteness effects might be explained within the same framework. In two experiments, word length (Experiment 1) and concreteness (Experiment 2) are examined using forward serial recall, backward serial recall, and item recognition. These results for word length replicate previous studies showing the dissociation in item and order tasks. The same was not true for the concreteness effect. In all three tasks concrete words were better remembered than abstract words. The concreteness effect cannot be explained in terms of an item-order trade off. PsycINFO Database Record (c) 2011 APA, all rights reserved.

Modelling of dynamic contact length in rail grinding process

NASA Astrophysics Data System (ADS)

Zhi, Shaodan; Li, Jianyong; Zarembski, A. M.

2014-09-01

Rails endure frequent dynamic loads from the passing trains for supporting trains and guiding wheels. The accumulated stress concentrations will cause the plastic deformation of rail towards generating corrugations, contact fatigue cracks and also other defects, resulting in more dangerous status even the derailment risks. So the rail grinding technology has been invented with rotating grinding stones pressed on the rail with defects removal. Such rail grinding works are directed by experiences rather than scientifically guidance, lacking of flexible and scientific operating methods. With grinding control unit holding the grinding stones, the rail grinding process has the characteristics not only the surface grinding but also the running railway vehicles. First of all, it's important to analyze the contact length between the grinding stone and the rail, because the contact length is a critical parameter to measure the grinding capabilities of stones. Moreover, it's needed to build up models of railway vehicle unit bonded with the grinding stone to represent the rail grinding car. Therefore the theoretical model for contact length is developed based on the geometrical analysis. And the calculating models are improved considering the grinding car's dynamic behaviors during the grinding process. Eventually, results are obtained based on the models by taking both the operation parameters and the structure parameters into the calculation, which are suitable for revealing the process of rail grinding by combining the grinding mechanism and the railway vehicle systems.

Creation of current filaments in the solar corona

NASA Technical Reports Server (NTRS)

Mikic, Z.; Schnack, D. D.; Van Hoven, G.

1989-01-01

It has been suggested that the solar corona is heated by the dissipation of electric currents. The low value of the resistivity requires the magnetic field to have structure at very small length scales if this mechanism is to work. In this paper it is demonstrated that the coronal magnetic field acquires small-scale structure through the braiding produced by smooth, randomly phased, photospheric flows. The current density develops a filamentary structure and grows exponentially in time. Nonlinear processes in the ideal magnetohydrodynamic equations produce a cascade effect, in which the structure introduced by the flow at large length scales is transferred to smaller scales. If this process continues down to the resistive dissipation length scale, it would provide an effective mechanism for coronal heating.

A 640-MHz 32-megachannel real-time polyphase-FFT spectrum analyzer

NASA Technical Reports Server (NTRS)

Zimmerman, G. A.; Garyantes, M. F.; Grimm, M. J.; Charny, B.

1991-01-01

A polyphase fast Fourier transform (FFT) spectrum analyzer being designed for NASA's Search for Extraterrestrial Intelligence (SETI) Sky Survey at the Jet Propulsion Laboratory is described. By replacing the time domain multiplicative window preprocessing with polyphase filter processing, much of the processing loss of windowed FFTs can be eliminated. Polyphase coefficient memory costs are minimized by effective use of run length compression. Finite word length effects are analyzed, producing a balanced system with 8 bit inputs, 16 bit fixed point polyphase arithmetic, and 24 bit fixed point FFT arithmetic. Fixed point renormalization midway through the computation is seen to be naturally accommodated by the matrix FFT algorithm proposed. Simulation results validate the finite word length arithmetic analysis and the renormalization technique.

Microfabricated ommatidia using a laser induced self-writing process for high resolution artificial compound eye optical systems.

PubMed

Jung, Hyukjin; Jeong, Ki-Hun

2009-08-17

A microfabricated compound eye, comparable to a natural compound eye shows a spherical arrangement of integrated optical units called artificial ommatidia. Each consists of a self-aligned microlens and waveguide. The increase of waveguide length is imperative to obtain high resolution images through an artificial compound eye for wide field-of - view imaging as well as fast motion detection. This work presents an effective method for increasing the waveguide length of artificial ommatidium using a laser induced self-writing process in a photosensitive polymer resin. The numerical and experimental results show the uniform formation of waveguides and the increment of waveguide length over 850 microm. (c) 2009 Optical Society of America

Caracterisation de la cohesion de l'interface AMF/polymere dans une structure deformable adaptative

NASA Astrophysics Data System (ADS)

Fischer-Rousseau, Charles

Les structures déformables adaptatives (SDA) sont appelées à jouer un rôle important en aéronautique entre autres. Les alliages à mémoire de forme (AMF) sont un des candidats les plus prometteurs. Beaucoup de travail reste toutefois à faire avant que ces structures rencontrent les exigences élevées reliées à leur intégration dans un contexte aéronautique. Des travaux de recherche ont montré que la résistance à la décohésion de l’interface AMF/polymère peut être un élément limitant dans la performance des SDA. Dans ce travail, l’effet sur la résistance à la décohésion de l’interface AMF/polymère de divers traitements de surface, géométries de fil et types de polymère est évalué. La géométrie du fil est modifiée par une combinaison spécifique de laminage à froid et de recuit postdéformation qui maintient les propriétés de mémoire de forme tout en permettant de réduire l’aire de la section transversale du fil. Le traitement thermomécanique le plus prometteur est proposé. Une nouvelle méthode d’évaluation de la résistance à la décohésion est développée. Plutôt que de tester les fils en arrachement et de mesurer la force maximale, les tests en contraction sont basés sur la capacité des fils d’AMF à se contracter s’ils ont été encastrés dans un état tiré et qu’ils sont chauffés par effet Joule. L’hypothèse qu’on pose est que ces tests sont une meilleure approximation des conditions rencontrées dans une SDA, où les fils se contractent plutôt qu’ils sont arrachés par une force externe à la structure. Bien qu’une décohésion partielle ait été observée pour tous les échantillons, l’aire de la surface où il y a décohésion tait plus grande pour les échantillons avec une pré-déformation plus grande. Le front de décohésion a semblé cesser de progresser après les cycles de chauffage initiaux lorsque la vitesse de chauffage était faible. Un modèle numérique simulant la réponse thermique transitoire du polymère et du fil d’AMF lors d’un chauffage par effet Joule est programmé à l’aide du logiciel ANSYS. Le comportement du modèle est validé avec des résultats expérimentaux où des thermocouples encastrés dans l’échantillon permettent des mesures locales de la température. Les résultats calculés sont en accord avec les résultats expérimentaux d’un point de vue qualitatif, mais accusent des différences significatives d’un point de vue quantitatif. La mesure du champ de déformation à l’interface du fil et du polymère dans une SDA permettrait de développer et valider un modèle numérique prenant en compte l’effet mémoire de forme d’un fil encastré dans une matrice polymère. Dans ce but, une machine de traction miniature permettant l’analyse par microspectrométrie Raman in situ est présentée. Elle a une capacité de 1 kN et un déplacement maximal de 20 mm dans une enveloppe de conception totale de 160 mm de diamètre. La machine est conçue pour que le milieu de l’échantillon soit immobile grâce au fait que le mouvement des deux extrémités soit symétrique. Les résultats montrent que du travail supplémentaire est nécessaire avant de pouvoir encastrer des fils d’AMF dans une structure déformable adaptative. Mots-clés: décohésion, structure active, alliage à mémoire de forme, AMF, tests d’arrachement.

Effect of the length of the cycle on biodegradable polymer production and microbial community selection in a sequencing batch reactor.

PubMed

Dionisi, Davide; Majone, Mauro; Vallini, Giovanni; Gregorio, Simona Di; Beccari, Mario

2007-01-01

The effect of the length of the cycle on the enrichment and selection of mixed cultures in sequencing batch reactors (SBRs) has been studied, with the aim of biodegradable polymers (namely, polyhydroxyalkanoates (PHAs)) production from organic wastes. At a fixed feed concentration (20 gCOD/L) and organic loading rate (20 gCOD/L/day), the SBR was operated at different lengths of the cycle, in the range 1-8 h. Process performance was measured by considering the rates and yields of polymer storage and of the competing phenomenon of growth. The selected biomass was enriched with microorganisms that were able to store PHAs at high rates and yields only when the length of the cycle was 2 or 4 h, even though in these conditions the process was unstable. On the other hand, when the length of the cycle was 1 or 8 h, the dynamic response of the selected microorganisms was dominated by growth. The best process performance was characterized by storage rates in the range 500-600 mgCOD/gCOD/h and storage yields of 0.45-0.55 COD/COD. The corresponding productivity of the process was in the range 0.25-0.30 gPHA/L/h, the highest values obtained until now for mixed cultures. The microbial composition of the selected biomasses was analyzed through denaturing gradient gel electrophoresis (DGGE) and reverse-transcriptase denaturing gradient gel electrophoresis (RT-DGGE). The instability of the runs characterized by high storage rate was associated with a higher microbial heterogeneity compared to the runs with a stable growth response.

Numerical study on dusty shock reflection over a double wedge

NASA Astrophysics Data System (ADS)

Yin, Jingyue; Ding, Juchun; Luo, Xisheng

2018-01-01

The dusty shock reflection over a double wedge with different length scales is systematically studied using an adaptive multi-phase solver. The non-equilibrium effect caused by the particle relaxation is found to significantly influence the shock reflection process. Specifically, it behaves differently for double wedges with different length scales of the first wedge L1. For a double wedge with L1 relatively longer than the particle relaxation length λ, the equilibrium shock dominates the shock reflection and seven typical reflection processes are obtained, which is similar to the pure gas counterpart. For a double wedge with L1 shorter than λ, the non-equilibrium effect manifests more evidently, i.e., three parts of the dusty shock system including the frozen shock, the relaxation zone, and the equilibrium shock together dominate the reflection process. As a result, the shock reflection is far more complicated than the pure gas counterpart and eleven transition processes are found under various wedge angles. These findings give a complete description of all possible processes of dusty shock reflection over a double wedge and may be useful for better understanding the non-equilibrium shock reflection over complex structures.

Identification of full-length dentin matrix protein 1 in dentin and bone.

PubMed

Huang, Bingzhen; Maciejewska, Izabela; Sun, Yao; Peng, Tao; Qin, Disheng; Lu, Yongbo; Bonewald, Lynda; Butler, William T; Feng, Jian; Qin, Chunlin

2008-05-01

Dentin matrix protein 1 (DMP1) has been identified in the extracellular matrix (ECM) of dentin and bone as the processed NH(2)-terminal and COOH-terminal fragment. However, the full-length form of DMP1 has not been identified in these tissues. The focus of this investigation was to search for the intact full-length DMP1 in dentin and bone. We used two types of anti-DMP1 antibodies to identify DMP1: one type specifically recognizes the NH(2)-terminal region and the other type is only reactive to the COOH-terminal region of the DMP1 amino acid sequence. An approximately 105-kDa protein, extracted from the ECM of rat dentin and bone, was recognized by both types of antibodies; and the migration rate of this protein was identical to the recombinant mouse full-length DMP1 made in eukaryotic cells. We concluded that this approximately 105-kDa protein is the full-length form of DMP1, which is considerably less abundant than its processed fragments in the ECM of dentin and bone. We also detected the full-length form of DMP1 and its processed fragments in the extract of dental pulp/odontoblast complex dissected from rat teeth. In addition, immunofluorescence analysis showed that in MC3T3-E1 cells the NH(2)-terminal and COOH-terminal fragments of DMP1 are distributed differently. Our findings indicate that the majority of DMP1 must be cleaved within the cells that synthesize it and that minor amounts of uncleaved DMP1 molecules are secreted into the ECM of dentin and bone.

Time to stabilization in single leg drop jump landings: an examination of calculation methods and assessment of differences in sample rate, filter settings and trial length on outcome values.

PubMed

Fransz, Duncan P; Huurnink, Arnold; de Boode, Vosse A; Kingma, Idsart; van Dieën, Jaap H

2015-01-01

Time to stabilization (TTS) is the time it takes for an individual to return to a baseline or stable state following a jump or hop landing. A large variety exists in methods to calculate the TTS. These methods can be described based on four aspects: (1) the input signal used (vertical, anteroposterior, or mediolateral ground reaction force) (2) signal processing (smoothed by sequential averaging, a moving root-mean-square window, or fitting an unbounded third order polynomial), (3) the stable state (threshold), and (4) the definition of when the (processed) signal is considered stable. Furthermore, differences exist with regard to the sample rate, filter settings and trial length. Twenty-five healthy volunteers performed ten 'single leg drop jump landing' trials. For each trial, TTS was calculated according to 18 previously reported methods. Additionally, the effects of sample rate (1000, 500, 200 and 100 samples/s), filter settings (no filter, 40, 15 and 10 Hz), and trial length (20, 14, 10, 7, 5 and 3s) were assessed. The TTS values varied considerably across the calculation methods. The maximum effect of alterations in the processing settings, averaged over calculation methods, were 2.8% (SD 3.3%) for sample rate, 8.8% (SD 7.7%) for filter settings, and 100.5% (SD 100.9%) for trial length. Differences in TTS calculation methods are affected differently by sample rate, filter settings and trial length. The effects of differences in sample rate and filter settings are generally small, while trial length has a large effect on TTS values. Copyright © 2014 Elsevier B.V. All rights reserved.

Investigation on the durability of man-made vitreous fibers in rat lungs.

PubMed Central

Bellmann, B; Muhle, H; Kamstrup, O; Draeger, U F

1994-01-01

Two types of sized stonewool with median lengths of 6.7 and 10.1 microns and median diameters of 0.63 and 0.85 microns, and crocidolite with fibers of median length of 4.8 microns and median diameter of 0.18 microns were instilled intratracheally into female Wistar rats. A single dose of 2 mg in 0.3 ml saline was used for the stonewool samples and 0.1 mg in 0.3 ml saline for crocidolite. The evenness of distribution of fibers in the lung was checked by scanning electron microscopy (SEM). Five animals per group were sacrificed after 2 days, 1, 3, 6, and 12 months. After low-temperature ashing of the lungs about 200 fibers per animal were analyzed by SEM for length and diameter. The number and mass of fibers in the total lung were calculated. For the stonewool samples the decrease in the number of fibers in the lung ash followed approximately first order kinetics resulting in half-times of 90 and 120 days. The analysis of fiber number and diameter of different length fractions was used to estimate the contribution of three processes of fiber elimination: transport by macrophages for short fibers, breakage of fibers, and dissolution of fibers. (The process of transport by macrophages was found fastest for fibers with length < 2.5 microns). For the elimination of critical fibers with length > 5 microns, the breakage and dissolution were the most important processes. The breakage of fibers was predominant for one of the stonewool samples. The preferential type of the mechanism of fiber elimination is dependent on chemical composition and size distribution. PMID:7882927

Chemical Reactions in Turbulent Mixing Flows.

DTIC Science & Technology

1986-06-15

length from Reynolds and Schmidt numbers at high Reynolds number, 2. the linear dependence of flame length on the stoichiometric mixture ratio, and, 3...processes are unsteady and the observed large scale flame length fluctuations are the best evidence of the individual cascade. A more detailed examination...Damk~hler number. When the same ideas are used in a model of fuel jets burning in air, it explains (Broadwell 1982): 1. the independence of flame

JPL-ANTOPT antenna structure optimization program

NASA Technical Reports Server (NTRS)

Strain, D. M.

1994-01-01

New antenna path-length error and pointing-error structure optimization codes were recently added to the MSC/NASTRAN structural analysis computer program. Path-length and pointing errors are important measured of structure-related antenna performance. The path-length and pointing errors are treated as scalar displacements for statics loading cases. These scalar displacements can be subject to constraint during the optimization process. Path-length and pointing-error calculations supplement the other optimization and sensitivity capabilities of NASTRAN. The analysis and design functions were implemented as 'DMAP ALTERs' to the Design Optimization (SOL 200) Solution Sequence of MSC-NASTRAN, Version 67.5.

Redesigning a joint replacement program using Lean Six Sigma in a Veterans Affairs hospital.

PubMed

Gayed, Benjamin; Black, Stephen; Daggy, Joanne; Munshi, Imtiaz A

2013-11-01

In April 2009, an analysis of joint replacement surgical procedures at the Richard L. Roudebush Veterans Affairs Medical Center, Indianapolis, Indiana, revealed that total hip and knee replacements incurred $1.4 million in non-Veterans Affairs (VA) care costs with an average length of stay of 6.1 days during fiscal year 2008. The Joint Replacement Program system redesign project was initiated following the Vision-Analysis-Team-Aim-Map-Measure-Change-Sustain (VA-TAMMCS) model to increase efficiency, decrease length of stay, and reduce non-VA care costs. To determine the effectiveness of Lean Six Sigma process improvement methods applied in a VA hospital. Perioperative processes for patients undergoing total joint replacement were redesigned following the VA-TAMMCS model--the VA's official, branded method of Lean Six Sigma process improvement. A multidisciplinary team including the orthopedic surgeons, frontline staff, and executive management identified waste in the current processes and initiated changes to reduce waste and increase efficiency. Data collection included a 1-year baseline period and a 20-month sustainment period. The primary endpoint was length of stay; a secondary analysis considered non-VA care cost reductions. Length of stay decreased 36% overall, decreasing from 5.3 days during the preproject period to 3.4 days during the 20-month sustainment period (P < .001). Non-VA care was completely eliminated for patients undergoing total hip and knee replacement at the Richard L. Roudebush Veterans Affairs Medical Center, producing an estimated return on investment of $1 million annually when compared with baseline cost and volumes. In addition, the volume of total joint replacements at this center increased during the data collection period. The success of the Joint Replacement Program demonstrates that VA-TAMMCS is an effective tool for Lean and Six Sigma process improvement initiatives in a surgical practice, producing a 36% sustained reduction in length of stay and completely eliminating non-VA care for total hip and knee replacements while increasing total joint replacement volume at this medical center.

Contraction et filamentation des decharges micro-ondes entretenues a la pression atmospherique: Application a la detoxication des gaz a effet de serre

NASA Astrophysics Data System (ADS)

Kabouzi, Yassine

The remediation of greenhouse gases, such as perfluorinated compounds (PFCs), constitutes a major environmental concern. Plasmas operating at atmospheric pressure offer an efficient technology for the control of toxic and greenhouse gas emission. The two main objectives of the thesis were to investigate the mechanisms of contraction and filamentation in atmospheric-pressure microwave discharges, and to examine their influence on the plasma abatement process of PFC gases in these discharges. The finite thermal conductivity of the gas discharge is responsible for the gas nonuniform heating leading to a contracted discharge column. The gas thermal conductivity and the penetration depth of the microwave electric field in the plasma are shown to set the value of the plasma radius. The degree of contraction and filamentation of microwave discharges can be controlled, and even reduced, by modulating adequately the incident microwave power. The relaxation times of heat conduction and heat release are actually observed to be of the same magnitude, and correspond to the modulation period for which the discharge shows less contraction. PFC molecules are eliminated through their fragmentation by inelastic collisions with electrons and the subsequent oxidation of these fragments. Reformation of PFC molecules is the main process limiting the abatement efficiency in atmospheric-pressure microwave discharges. As a result of discharge radial contraction, a relative "colder" space between the plasma filament and the discharge tube wall favors PFC reformation and, therefore, lowers the destruction efficiency. The PFC destruction efficiency is found to increase with absorbed microwave power. Surface-wave microwave discharges sustained at atmospheric pressure prove to be an efficient and ecological solution for emission reduction of greenhouse gases.

Concrete Crack Identification Using a UAV Incorporating Hybrid Image Processing

PubMed Central

Lee, Junhwa; Ahn, Eunjong; Cho, Soojin; Shin, Myoungsu

2017-01-01

Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV) technologies combined with digital image processing have recently been applied to crack assessment to overcome the drawbacks of manual visual inspection. However, identification of crack information in terms of width and length has not been fully explored in the UAV-based applications, because of the absence of distance measurement and tailored image processing. This paper presents a crack identification strategy that combines hybrid image processing with UAV technology. Equipped with a camera, an ultrasonic displacement sensor, and a WiFi module, the system provides the image of cracks and the associated working distance from a target structure on demand. The obtained information is subsequently processed by hybrid image binarization to estimate the crack width accurately while minimizing the loss of the crack length information. The proposed system has shown to successfully measure cracks thicker than 0.1 mm with the maximum length estimation error of 7.3%. PMID:28880254

Superconductor-insulator transition in long MoGe nanowires.

PubMed

Kim, Hyunjeong; Jamali, Shirin; Rogachev, A

2012-07-13

The properties of one-dimensional superconducting wires depend on physical processes with different characteristic lengths. To identify the process dominant in the critical regime we have studied the transport properties of very narrow (9-20 nm) MoGe wires fabricated by advanced electron-beam lithography in a wide range of lengths, 1-25  μm. We observed that the wires undergo a superconductor-insulator transition (SIT) that is controlled by cross sectional area of a wire and possibly also by the width-to-thickness ratio. The mean-field critical temperature decreases exponentially with the inverse of the wire cross section. We observed that a qualitatively similar superconductor-insulator transition can be induced by an external magnetic field. Our results are not consistent with any currently known theory of the SIT. Some long superconducting MoGe nanowires can be identified as localized superconductors; namely, in these wires the one-electron localization length is much smaller than the length of a wire.

Electropolishing effect on roughness metrics of ground stainless steel: a length scale study

NASA Astrophysics Data System (ADS)

Nakar, Doron; Harel, David; Hirsch, Baruch

2018-03-01

Electropolishing is a widely-used electrochemical surface finishing process for metals. The electropolishing of stainless steel has vast commercial application, such as improving corrosion resistance, improving cleanness, and brightening. The surface topography characterization is performed using several techniques with different lateral resolutions and length scales, from atomic force microscopy in the nano-scale (<0.1 µm) to stylus and optical profilometry in the micro- and mesoscales (0.1 µm-1 mm). This paper presents an experimental length scale study of the surface texture of ground stainless steel followed by an electropolishing process in the micro and meso lateral scales. Both stylus and optical profilometers are used, and multiple cut-off lengths of the standard Gaussian filter are adopted. While the commonly used roughness amplitude parameters (Ra, Rq and Rz) fail to characterize electropolished textures, the root mean square slope (RΔq) is found to better describe the electropolished surfaces and to be insensitive to scale.

Dérive à la surface de l'océan sous l'effet des vagues

NASA Astrophysics Data System (ADS)

Ardhuin, Fabrice; Martin-Lauzer, François-Régis; Chapron, Bertrand; Craneguy, Philippe; Girard-Ardhuin, Fanny; Elfouhaily, Tanos

2004-09-01

We model the drift velocity near the ocean surface separating the motion induced by the local current, itself influenced by winds and waves, and the motion induced by the waves, which are generated by local and remote winds. Application to the drift of 'tar balls', following the sinking of the oil tanker Prestige-Nassau in November 2002, shows that waves contribute at least one third of the drift for pollutants floating 1 m below the surface, with a mean direction about 30° to the right of the wind-sea direction. Although not new, this result was previously obtained with specific models, whereas the formalism used here combines classical wave and circulation forecasting models. To cite this article: F. Ardhuin et al., C. R. Geoscience 336 (2004).

Amplification sans bruit d'images optiques

NASA Astrophysics Data System (ADS)

Gigan, S.; Delaubert, V.; Lopez, L.; Treps, N.; Maitre, A.; Fabre, C.

2004-11-01

Nous utilisons un Oscillateur Paramétrique Optique (OPO) pompé sous le seuil dans le but d'amplifier une image multimode transverse sans dégradation du rapport signal à bruit. Le dispositif expérimental met en œuvre un OPO de type II triplement résonant et semi-confocal pour le faisceau amplifié. L'existence d'effets quantiques lors de l'amplification multimode dans un tel dispositif a été montrée expérimentalement. Plus généralement, ceci nous a amené à étudier les propriétés quantiques transverses des faisceaux lumineux amplifiés. Une telle étude peut trouver des applications non seulement en imagerie, mais également dans le traitement quantique de l'information.

NATO Force Health Protection Requirements from Pre- to Post-Deployment: Population Health for the Military (Les besoins des forces de l’OTAN en matiere de soins de sante du pre-deploiement jusqu’au post-deploiement: la sante des populations militaires)

DTIC Science & Technology

2003-12-01

la dangerosité résultant d’un certain niveau d’exposition à un agent, ainsi que l’estimation des effets sur les populations après une exposition...grand que ce que peut accepter la société. 5) La phase de contrôle du risque se focalise sur les différentes mesures à prendre afin soit « de... les sections précédentes. Sur base de ce schéma, on peut envisager une stratégie globale de gestion des risques de santé au sein des Forces Armées

Ecoulement et mise en structure de suspensions macroscopiques

NASA Astrophysics Data System (ADS)

Petit, L.

In this review, we report the various experimental studies performed on suspensions of solid particules in liquids, and concerning the rheological behaviour of such systems and the ordering of particules under the applied velocity fields. The number of materials which are flowing suspensions (reagents in chemical engineering, paints while spreading, blood flow, muds in oil reservoir) gave rise to a number of experimental studies, especially in the last twenty years. The results show a wide variety of behaviour, even for systems of intermediate concentration. In addition, even for identical systems, the results depend of the type of flow. Then, it is clear that, in addition of the standard parameters which are to be taken into account, it is necessary to consider the type of flow the suspension is submitted to. The flow influences the spatial distribution of the particules, leading to their ordering or migration. These ordering or motions influence the flow, and then, the rheological behaviour of the whole system. So, there is a feedback mechanism from the ordering to the flow, which explains the experimental observations. Nous reportons dans cette revue les différentes études expérimentales réalisées sur les suspensions de particules solides dans un liquide et qui concernent le comportement rhéologique de ces systèmes ainsi que les mouvements des particules sous l'effet des champs de vitesse imposés. Ces mouvements peuvent conduire soit à des mises en structure, ou encore à des migrations des particules. L'importance du nombre de matériaux qui se présentent sous forme de suspension et qui sont mis en écoulement (réactif en génie chimique, peintures lors de leur mise en place, écoulement sanguin, boues dans les forages pétroliers,...) a motivé un grand nombre de travaux expérimentaux plus fondamentaux sur le sujet, particulièrement dans les vingt dernières années. Les résultats correspondants montrent une très grande diversité des comportements même pour les systèmes moyennement concentrés. Bien plus, pour des systèmes identiques, les résultats dépendent du type d'écoulement imposé. Ceci montre clairement, qu'à côté des facteurs standards qui sont à prendre en compte pour caractériser le comportement de tels systèmes (concentration de la phase solide, taille des particules, interactions entre particules, effets de diffusion,...), il est nécessaire de tenir compte de la nature de l'écoulement auquel est soumise la suspension. Cet écoulement modifie la distribution spatiale des particules, soit directement, soit par l'intermédiaire de différents mécanismes tels que écoulements secondaires, diffusion. Ces effets se traduisent par une mise en ordre des particules, ou bien à des mouvements de migration. Les structures ou les mouvements ainsi créés agissent à leur tour sur les propriétés de l'écoulement, et de là, sur le comportement rhéologique de l'ensemble du système. Il existe ainsi un mécanisme de rétroaction de la structure sur l'écoulement qui permet d'expliquer les comportements observés expérimentalement.

Fluctuations Magnetiques des Gaz D'electrons Bidimensionnels: Application AU Compose Supraconducteur LANTHANE(2-X) Strontium(x) Cuivre OXYGENE(4)

NASA Astrophysics Data System (ADS)

Benard, Pierre

Nous presentons une etude des fluctuations magnetiques de la phase normale de l'oxyde de cuivre supraconducteur La_{2-x}Sr _{x}CuO_4 . Le compose est modelise par le Hamiltonien de Hubbard bidimensionnel avec un terme de saut vers les deuxiemes voisins (modele tt'U). Le modele est etudie en utilisant l'approximation de la GRPA (Generalized Random Phase Approximation) et en incluant les effets de la renormalisation de l'interaction de Hubbard par les diagrammes de Brueckner-Kanamori. Dans l'approche presentee dans ce travail, les maximums du facteur de structure magnetique observes par les experiences de diffusion de neutrons sont associes aux anomalies 2k _{F} de reseau du facteur de structure des gaz d'electrons bidimensionnels sans interaction. Ces anomalies proviennent de la diffusion entre particules situees a des points de la surface de Fermi ou les vitesses de Fermi sont tangentes, et conduisent a des divergences dont la nature depend de la geometrie de la surface de Fermi au voisinage de ces points. Ces resultats sont ensuite appliques au modele tt'U, dont le modele de Hubbard usuel tU est un cas particulier. Dans la majorite des cas, les interactions ne determinent pas la position des maximums du facteur de structure. Le role de l'interaction est d'augmenter l'intensite des structures du facteur de structure magnetique associees a l'instabilite magnetique du systeme. Ces structures sont souvent deja presentes dans la partie imaginaire de la susceptibilite sans interaction. Le rapport d'intensite entre les maximums absolus et les autres structures du facteur de structure magnetique permet de determiner le rapport U_ {rn}/U_{c} qui mesure la proximite d'une instabilite magnetique. Le diagramme de phase est ensuite etudie afin de delimiter la plage de validite de l'approximation. Apres avoir discute des modes collectifs et de l'effet d'une partie imaginaire non-nulle de la self-energie, l'origine de l'echelle d'energie des fluctuations magnetiques est examinee. Il est ensuite demontre que le modele a trois bandes predit les memes resultats pour la position des structures du facteur de structure magnetique que le modele a une bande, dans la limite ou l'hybridation des orbitales des atomes d'oxygene des plans Cu-O_2 et l'amplitude de sauts vers les seconds voisins sont nulles. Il est de plus constate que l'effet de l'hybridation des orbitales des atomes d'oxygene est bien modelise par le terme de saut vers les seconds voisins. Meme si ils decrivent correctement le comportement qualitatif des maximums du facteur de structure magnetique, les modeles a trois bandes et a une bande ne permettent pas d'obtenir une position de ces structures conforme avec les mesures experimentales, si on suppose que la bande est rigide, c'est-a-dire que les parametres du Hamiltonien sont independants de la concentration de strontium. Ceci peut etre cause par la dependance des parametres du Hamiltonien sur la concentration de strontium. Finalement, les resultats sont compares avec les experiences de diffusion de neutrons et les autres theories, en particulier celles de Littlewood et al. (1993) et de Q. Si et al. (1993). La comparaison avec les resultats experimentaux pour le compose de lanthane suggere que le liquide de Fermi possede une surface de Fermi disjointe, et qu'il est situe pres d'une instabilite magnetique incommensurable.

Basic visual perceptual processes in children with typical development and cerebral palsy: The processing of surface, length, orientation, and position.

PubMed

Schmetz, Emilie; Magis, David; Detraux, Jean-Jacques; Barisnikov, Koviljka; Rousselle, Laurence

2018-03-02

The present study aims to assess how the processing of basic visual perceptual (VP) components (length, surface, orientation, and position) develops in typically developing (TD) children (n = 215, 4-14 years old) and adults (n = 20, 20-25 years old), and in children with cerebral palsy (CP) (n = 86, 5-14 years old) using the first four subtests of the Battery for the Evaluation of Visual Perceptual and Spatial processing in children. Experiment 1 showed that these four basic VP processes follow distinct developmental trajectories in typical development. Experiment 2 revealed that children with CP present global and persistent deficits for the processing of basic VP components when compared with TD children matched on chronological age and nonverbal reasoning abilities.

Cooperative and noncooperative magnetization reversal in alnicos

DOE PAGES

Skomski, Ralph; Ke, Liqin; Kramer, Matthew J.; ...

2017-02-08

Here, we investigate how magnetostatic interactions affect the coercivity of alnico-type magnets. Starting from exact micromagnetic relations, we also analyze two limits, namely cooperative reversal processes operative on short lengths scales and noncooperative reversal processes on long length scales. Furthermore, in alnicos, intrawire interactions are predominantly cooperative, whereas interwire effects are typically noncooperative. However, the transition between the regimes depends on feature size and hysteresis-loop shape, and interwire cooperative effects are largest for nearly rectangular loops. Our analysis revises the common shape-anisotropy interpretation of alnicos.

Nuclear test ban treaty verification: Improving test ban monitoring with empirical and model-based signal processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, David B.; Gibbons, Steven J.; Rodgers, Arthur J.

In this approach, small scale-length medium perturbations not modeled in the tomographic inversion might be described as random fields, characterized by particular distribution functions (e.g., normal with specified spatial covariance). Conceivably, random field parameters (scatterer density or scale length) might themselves be the targets of tomographic inversions of the scattered wave field. As a result, such augmented models may provide processing gain through the use of probabilistic signal sub spaces rather than deterministic waveforms.

Nuclear test ban treaty verification: Improving test ban monitoring with empirical and model-based signal processing

DOE PAGES

Harris, David B.; Gibbons, Steven J.; Rodgers, Arthur J.; ...

2012-05-01

In this approach, small scale-length medium perturbations not modeled in the tomographic inversion might be described as random fields, characterized by particular distribution functions (e.g., normal with specified spatial covariance). Conceivably, random field parameters (scatterer density or scale length) might themselves be the targets of tomographic inversions of the scattered wave field. As a result, such augmented models may provide processing gain through the use of probabilistic signal sub spaces rather than deterministic waveforms.

Optimised process for fabricating tapered long period gratings

NASA Astrophysics Data System (ADS)

Mullaney, K.; Staines, S. E.; James, S. W.; Tatam, R. P.

2017-04-01

The process of fabricating tapered long period gratings (TLPGs) using a CO2 laser is described. TLPGs with a period spacing of 378 μm, were fabricated by optimization of the taper waist diameter and careful control of the duty-cycle and its uniformity along the length of the grating. The 6-period TLPGs exhibited a pass-band insertion loss of 0.6 dB, resonance band extinction values of 3 dB and had a physical length of 2.27 mm.

Predictive Rate-Distortion for Infinite-Order Markov Processes

NASA Astrophysics Data System (ADS)

Marzen, Sarah E.; Crutchfield, James P.

2016-06-01

Predictive rate-distortion analysis suffers from the curse of dimensionality: clustering arbitrarily long pasts to retain information about arbitrarily long futures requires resources that typically grow exponentially with length. The challenge is compounded for infinite-order Markov processes, since conditioning on finite sequences cannot capture all of their past dependencies. Spectral arguments confirm a popular intuition: algorithms that cluster finite-length sequences fail dramatically when the underlying process has long-range temporal correlations and can fail even for processes generated by finite-memory hidden Markov models. We circumvent the curse of dimensionality in rate-distortion analysis of finite- and infinite-order processes by casting predictive rate-distortion objective functions in terms of the forward- and reverse-time causal states of computational mechanics. Examples demonstrate that the resulting algorithms yield substantial improvements.

Effects of plaque lengths on stent surface roughness.

PubMed

Syaifudin, Achmad; Takeda, Ryo; Sasaki, Katsuhiko

2015-01-01

The physical properties of the stent surface influence the effectiveness of vascular disease treatment after stent deployment. During the expanding process, the stent acquires high-level deformation that could alter either its microstructure or the magnitude of surface roughness. This paper constructed a finite element simulation to observe the changes in surface roughness during the stenting process. Structural transient dynamic analysis was performed using ANSYS, to identify the deformation after the stent is placed in a blood vessel. Two types of bare metal stents are studied: a Palmaz type and a Sinusoidal type. The relationship between plaque length and the changes in surface roughness was investigated by utilizing three different length of plaque; plaque length longer than the stent, shorter than the stent and the same length as the stent. In order to reduce computational time, 3D cyclical and translational symmetry was implemented into the FE model. The material models used was defined as a multilinear isotropic for stent and hyperelastic for the balloon, plaque and vessel wall. The correlation between the plastic deformation and the changes in surface roughness was obtained by intermittent pure tensile test using specimen whose chemical composition was similar to that of actual stent material. As the plastic strain is achieved from FE simulation, the surface roughness can be assessed thoroughly. The study found that the plaque size relative to stent length significantly influenced the critical changes in surface roughness. It was found that the length of stent which is equal to the plaque length was preferable due to the fact that it generated only moderate change in surface roughness. This effect was less influential to the Sinusoidal stent.

Aerosol based direct-write micro-additive fabrication method for sub-mm 3D metal-dielectric structures

NASA Astrophysics Data System (ADS)

Rahman, Taibur; Renaud, Luke; Heo, Deuk; Renn, Michael; Panat, Rahul

2015-10-01

The fabrication of 3D metal-dielectric structures at sub-mm length scale is highly important in order to realize low-loss passives and GHz wavelength antennas with applications in wearable and Internet-of-Things (IoT) devices. The inherent 2D nature of lithographic processes severely limits the available manufacturing routes to fabricate 3D structures. Further, the lithographic processes are subtractive and require the use of environmentally harmful chemicals. In this letter, we demonstrate an additive manufacturing method to fabricate 3D metal-dielectric structures at sub-mm length scale. A UV curable dielectric is dispensed from an Aerosol Jet system at 10-100 µm length scale and instantaneously cured to build complex 3D shapes at a length scale  <1 mm. A metal nanoparticle ink is then dispensed over the 3D dielectric using a combination of jetting action and tilted dispense head, also using the Aerosol Jet technique and at a length scale 10-100 µm, followed by the nanoparticle sintering. Simulation studies are carried out to demonstrate the feasibility of using such structures as mm-wave antennas. The manufacturing method described in this letter opens up the possibility of fabricating an entirely new class of custom-shaped 3D structures at a sub-mm length scale with potential applications in 3D antennas and passives.

Children and adolescents' performance on a medium-length/nonsemantic word-list test.

PubMed

Flores-Lázaro, Julio César; Salgado Soruco, María Alejandra; Stepanov, Igor I

2017-01-01

Word-list learning tasks are among the most important and frequently used tests for declarative memory evaluation. For example, the California Verbal Learning Test-Children's Version (CVLT-C) and Rey Auditory Verbal Learning Test provide important information about different cognitive-neuropsychological processes. However, the impact of test length (i.e., number of words) and semantic organization (i.e., type of words) on children's and adolescents' memory performance remains to be clarified, especially during this developmental stage. To explore whether a medium-length non-semantically organized test can produce the typical curvilinear performance that semantically organized tests produce, reflecting executive control, we studied and compared the cognitive performance of normal children and adolescents by utilizing mathematical modeling. The model is based on the first-order system transfer function and has been successfully applied to learning curves for the CVLT-C (15 words, semantically organized paradigm). Results indicate that learning nine semantically unrelated words produces typical curvilinear (executive function) performance in children and younger adolescents and that performance could be effectively analyzed with the mathematical model. This indicates that the exponential increase (curvilinear performance) of correctly learned words does not solely depend on semantic and/or length features. This type of test controls semantic and length effects and may represent complementary tools for executive function evaluation in clinical populations in which semantic and/or length processing are affected.

Process and apparatus for separation of components of a gas stream

DOEpatents

Bryan, Charles R.; Torczynski, John R.; Brady, Patrick V.; Gallis, Michail; Brooks, Carlton F.

2014-06-17

A process and apparatus for separating a gas mixture comprising providing a slot in a gas separation channel (conceptualized as a laterally elongated Clusius-Dickel column), having a length through which a net cross-flow of the gas mixture may be established; applying a higher temperature to one side of the channel and a lower temperature on an opposite side of the channel thereby causing thermal-diffusion and buoyant-convection flow to occur in the slot; and establishing a net cross-flow of a gas mixture comprising at least one higher density gas component and at least one lower density gas component along the length of the slot, wherein the cross-flow causes, in combination with the convection flow, a spiraling flow in the slot; and wherein the spiral flow causes an increasing amount of separation of the higher density gas from the lower density gas along the length of the channel. The process may use one or more slots and/or channels.

Density profiles of the exclusive queuing process

NASA Astrophysics Data System (ADS)

Arita, Chikashi; Schadschneider, Andreas

2012-12-01

The exclusive queuing process (EQP) incorporates the exclusion principle into classic queuing models. It is characterized by, in addition to the entrance probability α and exit probability β, a third parameter: the hopping probability p. The EQP can be interpreted as an exclusion process of variable system length. Its phase diagram in the parameter space (α,β) is divided into a convergent phase and a divergent phase by a critical line which consists of a curved part and a straight part. Here we extend previous studies of this phase diagram. We identify subphases in the divergent phase, which can be distinguished by means of the shape of the density profile, and determine the velocity of the system length growth. This is done for EQPs with different update rules (parallel, backward sequential and continuous time). We also investigate the dynamics of the system length and the number of customers on the critical line. They are diffusive or subdiffusive with non-universal exponents that also depend on the update rules.

Estimation of Kubo number and correlation length of fluctuating magnetic fields and pressure in BOUT + + edge pedestal collapse simulation

NASA Astrophysics Data System (ADS)

Kim, Jaewook; Lee, W.-J.; Jhang, Hogun; Kaang, H. H.; Ghim, Y.-C.

2017-10-01

Stochastic magnetic fields are thought to be as one of the possible mechanisms for anomalous transport of density, momentum and heat across the magnetic field lines. Kubo number and Chirikov parameter are quantifications of the stochasticity, and previous studies show that perpendicular transport strongly depends on the magnetic Kubo number (MKN). If MKN is smaller than one, diffusion process will follow Rechester-Rosenbluth model; whereas if it is larger than one, percolation theory dominates the diffusion process. Thus, estimation of Kubo number plays an important role to understand diffusion process caused by stochastic magnetic fields. However, spatially localized experimental measurement of fluctuating magnetic fields in a tokamak is difficult, and we attempt to estimate MKNs using BOUT + + simulation data with pedestal collapse. In addition, we calculate correlation length of fluctuating pressures and Chirikov parameters to investigate variation correlation lengths in the simulation. We, then, discuss how one may experimentally estimate MKNs.

Process and apparatus for separation of components of a gas stream

DOEpatents

Bryan, Charles R; Torczynski, John R; Brady, Patrick V; Gallis, Michail; Brooks, Carlton F

2013-09-17

A process and apparatus for separating a gas mixture comprising providing a slot in a gas separation channel (conceptualized as a laterally elongated Clusius-Dickel column), having a length through which a net cross-flow of the gas mixture may be established; applying a higher temperature to one side of the channel and a lower temperature on an opposite side of the channel thereby causing thermal-diffusion and buoyant-convection flow to occur in the slot; and establishing a net cross-flow of a gas mixture comprising at least one higher density gas component and at least one lower density gas component along the length of the slot, wherein the cross-flow causes, in combination with the convection flow, a spiraling flow in the slot; and wherein the spiral flow causes an increasing amount of separation of the higher density gas from the lower density gas along the length of the channel. The process may use one or more slots and/or channels.

The Effect of Scan Length on the Structure and Mechanical Properties of Electron Beam-Melted Ti-6Al-4V

NASA Astrophysics Data System (ADS)

Everhart, Wesley; Dinardo, Joseph; Barr, Christian

2017-02-01

Electron beam melting (EBM) is a powder bed fusion-based additive manufacturing process in which selective areas of a layer of powder are melted with an electron beam and a part is built layer by layer. EBM scanning strategies within the Arcam AB® A2X EBM system rely upon governing relationships between the scan length of the beam path, the beam current, and speed. As a result, a large parameter process window exists for Ti-6Al-4V. Many studies have reviewed various properties of EBM materials without accounting for this effect. The work performed in this study demonstrates the relationship between scan length and the resulting density, microstructure, and mechanical properties of EBM-produced Ti-6Al-4V using the scanning strategies set by the EBM control software. This emphasizes the criticality of process knowledge and careful experimental design, and provides an alternate explanation for reported orientation-influenced strength differences.

Process and apparatus for separation of components of a gas stream

DOEpatents

Bryan, Charles R; Torczynski, John R; Brady, Patrick V; Gallis, Michail; Brooks, Carlton F

2013-11-19

A process and apparatus for separating a gas mixture comprising providing a slot in a gas separation channel (conceptualized as a laterally elongated Clusius-Dickel column), having a length through which a net cross-flow of the gas mixture may be established; applying a higher temperature to one side of the channel and a lower temperature on an opposite side of the channel thereby causing thermal-diffusion and buoyant-convection flow to occur in the slot; and establishing a net cross-flow of a gas mixture comprising at least one higher density gas component and at least one lower density gas component along the length of the slot, wherein the cross-flow causes, in combination with the convection flow, a spiraling flow in the slot; and wherein the spiral flow causes an increasing amount of separation of the higher density gas from the lower density gas along the length of the channel. The process may use one or more slots and/or channels.

Deep Sequence Analysis of AgoshRNA Processing Reveals 3' A Addition and Trimming.

PubMed

Harwig, Alex; Herrera-Carrillo, Elena; Jongejan, Aldo; van Kampen, Antonius Hubertus; Berkhout, Ben

2015-07-14

The RNA interference (RNAi) pathway, in which microprocessor and Dicer collaborate to process microRNAs (miRNA), was recently expanded by the description of alternative processing routes. In one of these noncanonical pathways, Dicer action is replaced by the Argonaute2 (Ago2) slicer function. It was recently shown that the stem-length of precursor-miRNA or short hairpin RNA (shRNA) molecules is a major determinant for Dicer versus Ago2 processing. Here we present the results of a deep sequence study on the processing of shRNAs with different stem length and a top G·U wobble base pair (bp). This analysis revealed some unexpected properties of these so-called AgoshRNA molecules that are processed by Ago2 instead of Dicer. First, we confirmed the gradual shift from Dicer to Ago2 processing upon shortening of the hairpin length. Second, hairpins with a stem larger than 19 base pair are inefficiently cleaved by Ago2 and we noticed a shift in the cleavage site. Third, the introduction of a top G·U bp in a regular shRNA can promote Ago2-cleavage, which coincides with a loss of Ago2-loading of the Dicer-cleaved 3' strand. Fourth, the Ago2-processed AgoshRNAs acquire a short 3' tail of 1-3 A-nucleotides (nt) and we present evidence that this product is subsequently trimmed by the poly(A)-specific ribonuclease (PARN).

Deep Sequence Analysis of AgoshRNA Processing Reveals 3' A Addition and Trimming

PubMed Central

Harwig, Alex; Herrera-Carrillo, Elena; Jongejan, Aldo; van Kampen, Antonius Hubertus; Berkhout, Ben

2015-01-01

The RNA interference (RNAi) pathway, in which microprocessor and Dicer collaborate to process microRNAs (miRNA), was recently expanded by the description of alternative processing routes. In one of these noncanonical pathways, Dicer action is replaced by the Argonaute2 (Ago2) slicer function. It was recently shown that the stem-length of precursor-miRNA or short hairpin RNA (shRNA) molecules is a major determinant for Dicer versus Ago2 processing. Here we present the results of a deep sequence study on the processing of shRNAs with different stem length and a top G·U wobble base pair (bp). This analysis revealed some unexpected properties of these so-called AgoshRNA molecules that are processed by Ago2 instead of Dicer. First, we confirmed the gradual shift from Dicer to Ago2 processing upon shortening of the hairpin length. Second, hairpins with a stem larger than 19 base pair are inefficiently cleaved by Ago2 and we noticed a shift in the cleavage site. Third, the introduction of a top G·U bp in a regular shRNA can promote Ago2-cleavage, which coincides with a loss of Ago2-loading of the Dicer-cleaved 3' strand. Fourth, the Ago2-processed AgoshRNAs acquire a short 3' tail of 1–3 A-nucleotides (nt) and we present evidence that this product is subsequently trimmed by the poly(A)-specific ribonuclease (PARN). PMID:26172504

Chalcogenide glass microlenses by inkjet printing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez, Eric A.; Waldmann, Maike; Arnold, Craig B.

We demonstrate micrometer scale mid-IR lenses for integrated optics, using solution-based inkjet printing techniques and subsequent processing. Arsenic sulfide spherical microlenses with diameters of 10-350 {mu}m and focal lengths of 10-700 {mu}m have been fabricated. The baking conditions can be used to tune the precise focal length.

Fall Colors, Temperature, and Day Length

ERIC Educational Resources Information Center

Burton, Stephen; Miller, Heather; Roossinck, Carrie

2007-01-01

Along with the bright hues of orange, red, and yellow, the season of fall represents significant changes, such as day length and temperature. These changes provide excellent opportunities for students to use science process skills to examine how abiotic factors such as weather and temperature impact organisms. In this article, the authors describe…

An unusual alkylidyne homologation.

PubMed

Han, Yong-Shen; Hill, Anthony F; Kong, Richard Y

2018-02-27

The reaction of [W([triple bond, length as m-dash]CH)Br(CO) 2 (dcpe)] (dcpe = 1,2-bis(dicyclohexylphosphino)ethane) with t BuLi and SiCl 4 affords the trichlorosilyl ligated neopentylidyne complex [W([triple bond, length as m-dash]C t Bu)(SiCl 3 )(CO) 2 (dcpe)]. This slowly reacts with H 2 O to afford [W([triple bond, length as m-dash]CCH 2 t Bu)Cl 3 (dcpe)] and ultimately H 2 C[double bond, length as m-dash]CH t Bu via an unprecedented alkylidyne homologation in which coordinated CO is the source of the additional carbon atom with potential relevance to the Fischer-Tropsch process.

Study on optimum length of raw material in stainless steel high-lock nuts forging

NASA Astrophysics Data System (ADS)

Cheng, Meiwen; Liu, Fenglei; Zhao, Qingyun; Wang, Lidong

2018-04-01

Taking 302 stainless steel (1Cr18Ni9) high-lock nuts for research objects, adjusting the length of raw material, then using DEFORM software to simulate the isothermal forging process of each station and conducting the corresponding field tests to study the effects of raw material size on the stainless steel high-lock nuts forming performance. The tests show that the samples of each raw material length is basically the same as the results of the DEFORM software. When the length of the raw material is 10mm, the appearance size of the parts can meet the design requirements.

Mechanical properties of kinked silicon nanowires

NASA Astrophysics Data System (ADS)

Jing, Yuhang; Zhang, Chuan; Liu, Yingzhi; Guo, Licheng; Meng, Qingyuan

2015-04-01

Molecular dynamics simulations are used to investigate the mechanical properties of KSiNWs. Our results show that KSiNWs have a much larger fracture strain compared to straight SiNWs. The effects of the periodic length of KSiNWs with symmetric arms and the arm length of the KSiNW with asymmetric arms on the mechanical properties of KSiNWs are studied. The fracture stress of KSiNWs decrease as the periodic length increases. However, the fracture strain of KSiNWs is not dependent on the short periodic length and the fracture strain of KSiNWs will abruptly increase to very large value and then vary slightly as the periodic length increases. In addition, the fracture stress is not dependent on arm length while the fracture strain monotonically increases as the arm length increases. We also investigate the fracture process of KSiNWs. The results in this paper suggest that the KSiNWs with larger fracture strain can be a promising anode materials in high performance Li-ion batteries.

Biometrical relationships in developing eggs and neonates of Octopus vulgaris in relation to parental diet

NASA Astrophysics Data System (ADS)

Márquez, Lorenzo; Quintana, Daniel; Lorenzo, Antonio; Almansa, Eduardo

2013-09-01

Captive Octopus vulgaris adults were fed three mono-diets based on pilchard, crab and squid and allowed to grow until reproduction under controlled temperature. Spawns from each dietary treatment were isolated, and the embryonic development, egg length, width and wet weight, in addition to neonate dry weight, dorsal mantle length and ventral mantle length were monitored. Pilchard-diet spawns developed faster in terms of thermal time. Initial egg wet weight was higher for squid and crab diets. Irrespective of the parental diet, eggs passed through a swelling process so that egg width and wet weight increased in a nonlinear way, whereas egg length was left nearly unaffected. Egg length and initial wet weight showed a high correlation with neonate dry weight. Egg length, even at advanced incubation, can be used as a good proxy for neonate dry weight, this fact having potential implications for the ecological and aquaculture research on O. vulgaris.

In Planta Synthesis of Designer-Length Tobacco Mosaic Virus-Based Nano-Rods That Can Be Used to Fabricate Nano-Wires.

PubMed

Saunders, Keith; Lomonossoff, George P

2017-01-01

We have utilized plant-based transient expression to produce tobacco mosaic virus (TMV)-based nano-rods of predetermined lengths. This is achieved by expressing RNAs containing the TMV origin of assembly sequence (OAS) and the sequence of the TMV coat protein either on the same RNA molecule or on two separate constructs. We show that the length of the resulting nano-rods is dependent upon the length of the RNA that possesses the OAS element. By expressing a version of the TMV coat protein that incorporates a metal-binding peptide at its C-terminus in the presence of RNA containing the OAS we have been able to produce nano-rods of predetermined length that are coated with cobalt-platinum. These nano-rods have the properties of defined-length nano-wires that make them ideal for many developing bionanotechnological processes.

In Planta Synthesis of Designer-Length Tobacco Mosaic Virus-Based Nano-Rods That Can Be Used to Fabricate Nano-Wires

PubMed Central

Saunders, Keith; Lomonossoff, George P.

2017-01-01

We have utilized plant-based transient expression to produce tobacco mosaic virus (TMV)-based nano-rods of predetermined lengths. This is achieved by expressing RNAs containing the TMV origin of assembly sequence (OAS) and the sequence of the TMV coat protein either on the same RNA molecule or on two separate constructs. We show that the length of the resulting nano-rods is dependent upon the length of the RNA that possesses the OAS element. By expressing a version of the TMV coat protein that incorporates a metal-binding peptide at its C-terminus in the presence of RNA containing the OAS we have been able to produce nano-rods of predetermined length that are coated with cobalt-platinum. These nano-rods have the properties of defined-length nano-wires that make them ideal for many developing bionanotechnological processes. PMID:28878782

Predictors of telomere content in dragon lizards

NASA Astrophysics Data System (ADS)

Ballen, Cissy; Healey, Mo; Wilson, Mark; Tobler, Michael; Olsson, Mats

2012-08-01

Telomeres shorten as a consequence of DNA replication, in particular in cells with low production of telomerase and perhaps in response to physiological stress from exposure to reactive oxygen species, such as superoxide. This process of telomere attrition is countered by innate antioxidation, such as via the production of superoxide dismutase. We studied the inheritance of telomere length in the Australian painted dragon lizard ( Ctenophorus pictus) and the extent to which telomere length covaries with mass-corrected maternal reproductive investment, which reflects the level of circulating yolk precursor and antioxidant, vitellogenin. Our predictors of offspring telomere length explained 72 % of telomere variation (including interstitial telomeres if such are present). Maternal telomere length and reproductive investment were positively influencing offspring telomere length in our analyses, whereas flow cytometry-estimated superoxide level was negatively impacting offspring telomere length. We suggest that the effects of superoxide on hatchling telomere shortening may be partly balanced by transgenerational effects of vitellogenin antioxidation.

Identification des risques professionnels dans l'industrie textile en République Démocratique du Congo

PubMed Central

Kitronza, Panda Lukongo

2014-01-01

Introduction Le but de cette étude est de mettre en évidence les facteurs de risques professionnels liés aux conditions de travail. Méthodes Cette étude qualitative basée sur les entretiens de groupe a été réalisée par une équipe pluridisciplinaire dans l'industrie textile de la région du Est de la RDC; comprenant un médecin de travail, un médecin de santé publique, un toxicologue, deux infirmiers du centre hospitalier de l'usine, un représentant du comité d'hygiène et un technicien de prévention. La démarche méthodologique a consisté en des entretiens en groupe, des observations et visites guidées de lieux de travail de l'entreprise. Résultats Dans la culture du coton, les effets d'une forte exposition aux pesticides peuvent entraîner des intoxications aiguës, chroniques et voire le décès. Les autres risques sont les accidents de travail, les maladies professionnelles, les troubles psychologiques. Dans l'industrie, les travailleurs sont exposés aux risques liés à l'empoussiérage des fibres de coton, aux facteurs des risques traumatiques, physiques (bruits, vibration) et chimiques (acides forts, bases fortes, solvants et colorants minéraux), ainsi qu'aux risques psychosociaux. La pollution de l'environnement et l’écotoxicité inhérente à ces activités restent l'effet de l'usage des grandes quantités d'intrants agricoles, engrais et produits phytosanitaires. Conclusion Cette étude a permis de mettre en évidence les différents facteurs de risques auxquelles sont soumis les travailleurs textiles; ainsi que les risques environnementaux liés à cette activité. Cela est de nature à permettre la mise sur pied d'une stratégie efficace de prévention et de protection des travailleurs. PMID:25977736

La supraconductivité a 100 ans !

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lebrun, Philippe

2011-04-14

Il y a 100 ans, le 8 avril 1911, une découverte majeure était réalisée : celle de la supraconductivité. La supraconductivité est la caractéristique qu’ont certains métaux et alliages de perdre toute résistance électrique en dessous d’une température donnée. Cette renversante découverte, réalisée de manière presque fortuite par Kammerlingh Onnes de l’Université de Leyde (Pays-Bas) et son étudiant Gilles Holst, a ouvert un nouveau champ de recherche en physique et de fabuleuses perspectives d’applications technologiques. Du point de vue scientifique, la supraconductivité est en effet l’une des rares manifestations de la physique quantique à l’échelle macroscopique.  Du point de vuemore » des retombées techniques, elle est porteuse d’applications majeures dans le domaine de la santé, des communications et de l’énergie. 100 ans après, les physiciens n’ont toujours pas fini d’explorer ce phénomène et ses applications. Le CERN abrite des applications de la supraconductivité à des échelles inédites. L’accélérateur de particules LHC, avec ses milliers d’aimants supraconducteurs répartis sur 27 kilomètres de circonférence, est en effet la plus grande application mondiale de la supraconductivité. Il ne pourrait exister sans elle. Le CERN fête donc la découverte de la supraconductivité avec une conférence exceptionnelle donnée par Philippe Lebrun. Au cours de cette conférence, l’expérience historique de Kammerlingh Onnes sera reproduite. Philippe Lebrun racontera l’histoire de cette étonnante découverte, en la replaçant dans le contexte scientifique de l’époque. Il racontera les développements scientifiques et les applications du premier siècle de la supraconductivité. Conférence en français Merci de bien vouloir vous inscrire au : +41 22 767 76 76 ou cern.reception@cern.ch« less

Restauration fonctionnelle du rachis : effet du niveau initial de douleur sur les performances des sujets lombalgiques chroniques

PubMed Central

Caby, Isabelle; Olivier, N; Mendelek, F; Kheir, R Bou; Vanvelcenaher, J; Pelayo, P

2014-01-01

HISTORIQUE : La lombalgie chronique est une douleur lombaire persistante d’origine multifactorielle. Le niveau de douleur initial reste faiblement utilisé pour analyser et comparer les réponses des patients lombalgiques au programme de reconditionnement. OBJECTIFS : Apprécier et évaluer les réponses des sujets lombalgiques chroniques très douloureux à une prise en charge dynamique et intensive. MÉTHODOLOGIE : 144 sujets atteints de lombalgie chronique ont été inclus dans un programme de restauration fonctionnelle du rachis de 5 semaines. Les sujets ont été classés en deux groupes de niveau de douleur: un groupe atteint de douleur sévère (n = 28) et un groupe atteint de douleur légère à modérée (n = 106). L’ensemble des sujets ont bénéficié d’une prise en charge identique comprenant principalement de la kinésithérapie, de l’ergothérapie, du reconditionnement musculaire et cardio-vasculaire ainsi qu’un suivi psychologique. Les paramètres physiques (flexibilité, force musculaire) et psychologiques (qualité de vie) ont été mesurés avant (T0) et après le programme (T5sem). RÉSULTATS : L’ensemble des performances physiques et fonctionnelles des sujets très douloureux sont moins bonnes et le retentissement de la lombalgie sur la qualité de vie, pour ces mêmes sujets, est majoré à T0. Toutes les différences significatives constatées à T0 entre les deux groupes s’effacent à T5sem. CONCLUSIONS : Les sujets lombalgiques chroniques très douloureux répondent favorablement au programme dynamique et intensif. L’intensité douloureuse de la lombalgie n’aurait pas d’effet sur les réponses au programme. La restauration fonctionnelle du rachis apporterait aux sujets la possibilité de mieux gérer leur douleur quel que soit son niveau. PMID:25299476

Effets du Parecoxib dans la Prévention des Adhérences abdominales postopératoires: étude expérimentale randomisée chez les rats

PubMed Central

Arung, Willy; Tshilombo, François; Odimba, Etienne

2015-01-01

Introduction Bien d’études ont été menées sur les adhérences intrapéritonéales, mais aucune unanimité n'est encore acquise sur leur prévention. Le but de notre étude a été d’évaluer le potentiel effet d'un antiinflammatoire, parecoxib dans la prévention des adhérences ainsi que sur la cicatrisation chez des rats. Méthodes Dans un modèle expérimental d'adhérences postopératoires secondaires à des lésions péritonéales par brûlure, 30 rats furent randomisés en trois groupes suivant le mode d'administration de parecoxib (groupe contrôle; intrapéritonéal; intramusculaire. Résultats Le parecoxib a significativement diminué la quantité (p < .05) et la sévérité (p < .01) des adhérences postopératoires dans les deux modèles expérimentaux. Au total, 21 rats ont développé des adhérences, respectivement 9 (100%) dans le groupe A, 5 (50%) dans le groupe B et 7 (70%) dans le groupe C (p = 0.05). Du point de vue de la formation des adhérences au site du traumatisme, dix-neuf rats en ont développé: 9 (100%) dans le groupe A et 5 (50%) pour chacun de deux autres groupes B et C. Une différence significative a été constatée en comparant ces groupes deux à deux: A vs B (p < 0.05); A vs C (p < 0,05). Parecoxib n'a pas compromis la cicatrisation intestinale, ni cutanée. Conclusion Cette étude a montré que le parecoxib pouvait réduire la formation des adhérences postopératoires. La confirmation de la sécurité du parecoxib sur les anastomoses intestinales doit être investiguée au cours d'autres expérimentations. PMID:26966478

Developpement de mesures non destructives, par ondes ultrasonores, d'epaisseurs de fronts de solidification dans les reacteurs metallurgiques

NASA Astrophysics Data System (ADS)

Floquet, Jimmy

Dans les cuves d'electrolyse d'aluminium, le milieu de reaction tres corrosif attaque les parois de la cuve, ce qui diminue leur duree de vie et augmente les couts de production. Le talus, qui se forme sous l'effet des pertes de chaleur qui maintiennent un equilibre thermique dans la cuve, sert de protection naturelle a la cuve. Son epaisseur doit etre controlee pour maximiser cet effet. Advenant la resorption non voulue de ce talus, les degats generes peuvent s'evaluer a plusieurs centaines de milliers de dollars par cuve. Aussi, l'objectif est de developper une mesure ultrasonore de l'epaisseur du talus, car elle serait non intrusive et non destructive. La precision attendue est de l'ordre du centimetre pour des mesures d'epaisseurs comprenant 2 materiaux, allant de 5 a 20 cm. Cette precision est le facteur cle permettant aux industriels de controler l'epaisseur du talus de maniere efficace (maximiser la protection des parois tout en maximisant l'efficacite energetique du procede), par l'ajout d'un flux thermique. Cependant, l'efficacite d'une mesure ultrasonore dans cet environnement hostile reste a demontrer. Les travaux preliminaires ont permis de selectionner un transducteur ultrasonore a contact ayant la capacite a resister aux conditions de mesure (hautes temperatures, materiaux non caracterises...). Differentes mesures a froid (traite par analyse temps-frequence) ont permis d'evaluer la vitesse de propagation des ondes dans le materiau de la cuve en graphite et de la cryolite, demontrant la possibilite d'extraire l'information pertinente d'epaisseur du talus in fine. Fort de cette phase de caracterisation des materiaux sur la reponse acoustique des materiaux, les travaux a venir ont ete realises sur un modele reduit de la cuve. Le montage experimental, un four evoluant a 1050 °C, instrumente d'une multitude de capteurs thermique, permettra une comparaison de la mesure intrusive LVDT a celle du transducteur, dans des conditions proches de la mesure industrielle. Mots-cles : Ultrasons, CND, Haute temperature, Aluminium, Cuve d'electrolyse.

Solute-specific scaling of inorganic nitrogen and phosphorus uptake in streams

NASA Astrophysics Data System (ADS)

Hall, R. O., Jr.; Baker, M. A.; Rosi-Marshall, E. J.; Tank, J. L.; Newbold, J. D.

2013-11-01

Stream ecosystem processes such as nutrient cycling may vary with stream position in the network. Using a scaling approach, we examined the relationship between stream size and nutrient uptake length, which represents the mean distance that a dissolved solute travels prior to removal from the water column. Ammonium (NH4+) uptake length increased proportionally with stream size measured as specific discharge (discharge/stream width) with a scaling exponent = 1.01. In contrast, uptake lengths for nitrate (NO3-) and soluble reactive phosphorus (SRP) increased more rapidly than increases in specific discharge (scaling exponents = 1.19 for NO3- and 1.35 for SRP). Additionally, the ratio of inorganic nitrogen (N) uptake length to SRP uptake length declined with stream size; there was relatively lower demand for SRP compared to N as stream size increased. Finally, we related the scaling of uptake length with specific discharge to that of stream length using Hack's law and downstream hydraulic geometry. Ammonium uptake length increased less than proportionally with distance from the headwaters, suggesting a strong role for larger streams and rivers in regulating nutrient transport.

Transport Imaging of Spatial Distribution of Mobility-Lifetime (Micro Tau) Product in Bulk Semiconductors for Nuclear Radiation Detection

DTIC Science & Technology

2012-06-01

the diffusion length L and the mobility-lifetime product  from the luminescence distribution using the 2D model for transport imaging in bulk...C. Scandrett, and N. M. Haegel, “Three-dimensional transport imaging for the spatially resolved determination of carrier diffusion length in bulk...that allows measurements of the diffusion length and extraction of the  product in luminescent materials without the need for device processing

Knotting probability of a shaken ball-chain.

PubMed

Hickford, J; Jones, R; du Pont, S Courrech; Eggers, J

2006-11-01

We study the formation of knots on a macroscopic ball chain, which is shaken on a horizontal plate at 12 times the acceleration of gravity. We find that above a certain critical length, the knotting probability is independent of chain length, while the time to shake out a knot increases rapidly with chain length. The probability of finding a knot after a certain time is the result of the balance of these two processes. In particular, the knotting probability tends to a constant for long chains.

Paternal age and telomere length in twins: the germ stem cell selection paradigm

PubMed Central

Hjelmborg, Jacob B; Dalgård, Christine; Mangino, Massimo; Spector, Tim D; Halekoh, Ulrich; Möller, Sören; Kimura, Masayuki; Horvath, Kent; Kark, Jeremy D; Christensen, Kaare; Kyvik, Kirsten O; Aviv, Abraham

2015-01-01

Telomere length, a highly heritable trait, is longer in offspring of older fathers. This perplexing feature has been attributed to the longer telomeres in sperm of older men and it might be an ‘epigenetic’ mechanism through which paternal age plays a role in telomere length regulation in humans. Based on two independent (discovery and replication) twin studies, comprising 889 twin pairs, we show an increase in the resemblance of leukocyte telomere length between dizygotic twins of older fathers, which is not seen in monozygotic twins. This phenomenon might result from a paternal age-dependent germ stem cell selection process, whereby the selected stem cells have longer telomeres, are more homogenous with respect to telomere length, and share resistance to aging. PMID:25865872

Computing the Length of the Shortest Telomere in the Nucleus

NASA Astrophysics Data System (ADS)

Dao Duc, K.; Holcman, D.

2013-11-01

The telomere length can either be shortened or elongated by an enzyme called telomerase after each cell division. Interestingly, the shortest telomere is involved in controlling the ability of a cell to divide. Yet, its dynamics remains elusive. We present here a stochastic approach where we model this dynamics using a Markov jump process. We solve the forward Fokker-Planck equation to obtain the steady state distribution and the statistical moments of telomere lengths. We focus specifically on the shortest one and we estimate its length difference with the second shortest telomere. After extracting key parameters such as elongation and shortening dynamics from experimental data, we compute the length of telomeres in yeast and obtain as a possible prediction the minimum concentration of telomerase required to ensure a proper cell division.

A combined electron beam/optical lithography process step for the fabrication of sub-half-micron-gate-length MMIC chips

NASA Technical Reports Server (NTRS)

Sewell, James S.; Bozada, Christopher A.

1994-01-01

Advanced radar and communication systems rely heavily on state-of-the-art microelectronics. Systems such as the phased-array radar require many transmit/receive (T/R) modules which are made up of many millimeter wave - microwave integrated circuits (MMIC's). The heart of a MMIC chip is the Gallium Arsenide (GaAs) field-effect transistor (FET). The transistor gate length is the critical feature that determines the operating frequency of the radar system. A smaller gate length will typically result in a higher frequency. In order to make a phased array radar system economically feasible, manufacturers must be capable of producing very large quantities of small-gate-length MMIC chips at a relatively low cost per chip. This requires the processing of a large number of wafers with a large number of chips per wafer, minimum processing time, and a very high chip yield. One of the bottlenecks in the fabrication of MIMIC chips is the transistor gate definition. The definition of sub-half-micron gates for GaAs-based field-effect transistors is generally performed by direct-write electron beam lithography (EBL). Because of the throughput limitations of EBL, the gate-layer fabrication is conventionally divided into two lithographic processes where EBL is used to generate the gate fingers and optical lithography is used to generate the large-area gate pads and interconnects. As a result, two complete sequences of resist application, exposure, development, metallization and lift-off are required for the entire gate structure. We have baselined a hybrid process, referred to as EBOL (electron beam/optical lithography), in which a single application of a multi-level resist is used for both exposures. The entire gate structure, (gate fingers, interconnects and pads), is then formed with a single metallization and lift-off process. The EBOL process thus retains the advantages of the high-resolution E-beam lithography and the high throughput of optical lithography while essentially eliminating an entire lithography/metallization/lift-off process sequence. This technique has been proven to be reliable for both trapezoidal and mushroom gates and has been successfully applied to metal-semiconductor and high-electron-mobility field-effect transistor (MESFET and HEMT) wafers containing devices with gate lengths down to 0.10 micron and 75 x 75 micron gate pads. The yields and throughput of these wafers have been very high with no loss in device performance. We will discuss the entire EBOL process technology including the multilayer resist structure, exposure conditions, process sensitivities, metal edge definition, device results, comparison to the standard gate-layer process, and its suitability for manufacturing.

A combined electron beam/optical lithography process step for the fabrication of sub-half-micron-gate-length MMIC chips

NASA Astrophysics Data System (ADS)

Sewell, James S.; Bozada, Christopher A.

1994-02-01

Advanced radar and communication systems rely heavily on state-of-the-art microelectronics. Systems such as the phased-array radar require many transmit/receive (T/R) modules which are made up of many millimeter wave - microwave integrated circuits (MMIC's). The heart of a MMIC chip is the Gallium Arsenide (GaAs) field-effect transistor (FET). The transistor gate length is the critical feature that determines the operating frequency of the radar system. A smaller gate length will typically result in a higher frequency. In order to make a phased array radar system economically feasible, manufacturers must be capable of producing very large quantities of small-gate-length MMIC chips at a relatively low cost per chip. This requires the processing of a large number of wafers with a large number of chips per wafer, minimum processing time, and a very high chip yield. One of the bottlenecks in the fabrication of MIMIC chips is the transistor gate definition. The definition of sub-half-micron gates for GaAs-based field-effect transistors is generally performed by direct-write electron beam lithography (EBL). Because of the throughput limitations of EBL, the gate-layer fabrication is conventionally divided into two lithographic processes where EBL is used to generate the gate fingers and optical lithography is used to generate the large-area gate pads and interconnects. As a result, two complete sequences of resist application, exposure, development, metallization and lift-off are required for the entire gate structure. We have baselined a hybrid process, referred to as EBOL (electron beam/optical lithography), in which a single application of a multi-level resist is used for both exposures. The entire gate structure, (gate fingers, interconnects and pads), is then formed with a single metallization and lift-off process. The EBOL process thus retains the advantages of the high-resolution E-beam lithography and the high throughput of optical lithography while essentially eliminating an entire lithography/metallization/lift-off process sequence. This technique has been proven to be reliable for both trapezoidal and mushroom gates and has been successfully applied to metal-semiconductor and high-electron-mobility field-effect transistor (MESFET and HEMT) wafers containing devices with gate lengths down to 0.10 micron and 75 x 75 micron gate pads. The yields and throughput of these wafers have been very high with no loss in device performance. We will discuss the entire EBOL process technology including the multilayer resist structure, exposure conditions, process sensitivities, metal edge definition, device results, comparison to the standard gate-layer process, and its suitability for manufacturing.

Relationship between Slivering Point and Gas Generation Rules of 19-Perforation TEGDN Propellants with Different Length/Outside Diameter Ratios and Perforation Diameters

NASA Astrophysics Data System (ADS)

Xiao, Zhenggang; Xu, Fuming

2018-04-01

In order to investigate the relationship between the slivering point and burning progressivity, a set of 19-perforation propellants containing triethylene glycol dinitrate (TEGDN) with different lengths/outside diameter ratios and perforation diameters was prepared and tested in a closed vessel. The mass fraction of burnt propellant was derived from the recorded pressure-time history of 19-perforation TEGDN propellants in the closed vessel according to the gas state equation and the form function of tested propellants. Based on the form function calculation and the mass fraction of burnt propellant, instantaneous burning surface area and the burning rate were obtained. The influence of length/outside diameter ratios and perforation diameters on the progressive combustion performance is studied through the dynamic vivacity method. With an increase in the length/outsider diameter, the slivering point occurs earlier and the slivering process lasts longer. Further, the burning progressivity of surface area can be improved. For propellants with same length/outside diameter ratio, with a decreasing of perforation diameter, the slivering point lags behind and the burning progressivity becomes greater. The slivering point corresponds to the instantaneous burning area, which is related to the form function and total burning process as well. However, the total burning progressivity of propellant is a very comprehensive result of propellant under multiple actions, including the mass fraction of burnt propellant, grain size and burning rate at different pressure regions. The correlation between them can boost a better understanding on the interaction between grain size, slivering burning process and burning progressivity.

Optimization of injection molding process parameters for a plastic cell phone housing component

NASA Astrophysics Data System (ADS)

Rajalingam, Sokkalingam; Vasant, Pandian; Khe, Cheng Seong; Merican, Zulkifli; Oo, Zeya

2016-11-01

To produce thin-walled plastic items, injection molding process is one of the most widely used application tools. However, to set optimal process parameters is difficult as it may cause to produce faulty items on injected mold like shrinkage. This study aims at to determine such an optimum injection molding process parameters which can reduce the fault of shrinkage on a plastic cell phone cover items. Currently used setting of machines process produced shrinkage and mis-specified length and with dimensions below the limit. Thus, for identification of optimum process parameters, maintaining closer targeted length and width setting magnitudes with minimal variations, more experiments are needed. The mold temperature, injection pressure and screw rotation speed are used as process parameters in this research. For optimal molding process parameters the Response Surface Methods (RSM) is applied. The major contributing factors influencing the responses were identified from analysis of variance (ANOVA) technique. Through verification runs it was found that the shrinkage defect can be minimized with the optimal setting found by RSM.

Damage evolution analysis of coal samples under cyclic loading based on single-link cluster method

NASA Astrophysics Data System (ADS)

Zhang, Zhibo; Wang, Enyuan; Li, Nan; Li, Xuelong; Wang, Xiaoran; Li, Zhonghui

2018-05-01

In this paper, the acoustic emission (AE) response of coal samples under cyclic loading is measured. The results show that there is good positive relation between AE parameters and stress. The AE signal of coal samples under cyclic loading exhibits an obvious Kaiser Effect. The single-link cluster (SLC) method is applied to analyze the spatial evolution characteristics of AE events and the damage evolution process of coal samples. It is found that a subset scale of the SLC structure becomes smaller and smaller when the number of cyclic loading increases, and there is a negative linear relationship between the subset scale and the degree of damage. The spatial correlation length ξ of an SLC structure is calculated. The results show that ξ fluctuates around a certain value from the second cyclic loading process to the fifth cyclic loading process, but spatial correlation length ξ clearly increases in the sixth loading process. Based on the criterion of microcrack density, the coal sample failure process is the transformation from small-scale damage to large-scale damage, which is the reason for changes in the spatial correlation length. Through a systematic analysis, the SLC method is an effective method to research the damage evolution process of coal samples under cyclic loading, and will provide important reference values for studying coal bursts.

A cognitive model for multidigit number reading: Inferences from individuals with selective impairments.

PubMed

Dotan, Dror; Friedmann, Naama

2018-04-01

We propose a detailed cognitive model of multi-digit number reading. The model postulates separate processes for visual analysis of the digit string and for oral production of the verbal number. Within visual analysis, separate sub-processes encode the digit identities and the digit order, and additional sub-processes encode the number's decimal structure: its length, the positions of 0, and the way it is parsed into triplets (e.g., 314987 → 314,987). Verbal production consists of a process that generates the verbal structure of the number, and another process that retrieves the phonological forms of each number word. The verbal number structure is first encoded in a tree-like structure, similarly to syntactic trees of sentences, and then linearized to a sequence of number-word specifiers. This model is based on an investigation of the number processing abilities of seven individuals with different selective deficits in number reading. We report participants with impairment in specific sub-processes of the visual analysis of digit strings - in encoding the digit order, in encoding the number length, or in parsing the digit string to triplets. Other participants were impaired in verbal production, making errors in the number structure (shifts of digits to another decimal position, e.g., 3,040 → 30,004). Their selective deficits yielded several dissociations: first, we found a double dissociation between visual analysis deficits and verbal production deficits. Second, several dissociations were found within visual analysis: a double dissociation between errors in digit order and errors in the number length; a dissociation between order/length errors and errors in parsing the digit string into triplets; and a dissociation between the processing of different digits - impaired order encoding of the digits 2-9, without errors in the 0 position. Third, within verbal production, a dissociation was found between digit shifts and substitutions of number words. A selective deficit in any of the processes described by the model would cause difficulties in number reading, which we propose to term "dysnumeria". Copyright © 2017 Elsevier Ltd. All rights reserved.

Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (South Florida). Southern, Gulf, and Summer Flounders.

DTIC Science & Technology

1986-07-01

ridge of the head (Figure 11), the 46 days after hatching (at 8 to 11 body becomes increasingly compressed, m), and this process was completed and the...length (SL) or stages of summer flounder: (A) 12 h notochord length (tip of snout to after hatching, (B) 96 h after hatch- end of notochord ) (NL...at temperatures from 14.5 changes in osmoregulatory processes to 21.6 0C (58.1-70.90 F). Stokes that correspond to spawning (1977) found that

Thermal diffusivity study of aged Li-ion batteries using flash method

NASA Astrophysics Data System (ADS)

Nagpure, Shrikant C.; Dinwiddie, Ralph; Babu, S. S.; Rizzoni, Giorgio; Bhushan, Bharat; Frech, Tim

Advanced Li-ion batteries with high energy and power density are fast approaching compatibility with automotive demands. While the mechanism of operation of these batteries is well understood, the aging mechanisms are still under investigation. Investigation of aging mechanisms in Li-ion batteries becomes very challenging, as aging does not occur due to a single process, but because of multiple physical processes occurring at the same time in a cascading manner. As the current characterization techniques such as Raman spectroscopy, X-ray diffraction, and atomic force microscopy are used independent of each other they do not provide a comprehensive understanding of material degradation at different length (nm 2 to m 2) scales. Thus to relate the damage mechanisms of the cathode at mm length scale to micro/nanoscale, data at an intermediate length scale is needed. As such, we demonstrate here the use of thermal diffusivity analysis by flash method to bridge the gap between different length scales. In this paper we present the thermal diffusivity analysis of an unaged and aged cell. Thermal diffusivity analysis maps the damage to the cathode samples at millimeter scale lengths. Based on these maps we also propose a mechanism leading to the increase of the thermal diffusivity as the cells are aged.

Higher order spectra and their use in digital communication signal estimation

NASA Astrophysics Data System (ADS)

Yayci, Cihat

1995-03-01

This thesis compared the detection ability of the spectrogram, the 1-1/2D instantaneous power spectrum (l-1/2D(sub ips)), the bispectrum, and outer product (dyadic) representation for digitally modulated signals corrupted by additive white Gaussian noise. Four detection schemes were tried on noise free BPSK, QPSK, FSK, and OOK signals using different transform lengths. After determining the optimum transform length, each test signal is corrupted by additive white Gaussian noise. Different SNR levels were used to determine the lowest SNR level at which the message or the modulation type could be extracted. The optimal transform length was found to be the symbol duration when processing BPSK, OOK, and FSK via the spectrogram, the 1-1/2D(sub ips) or the bispectrum method. The best transform size for QPSK was half of the symbol length. For the outer product (dyadic) spectral representation, the best transform size was four times larger than the symbol length. For all processing techniques, with the exception of the other product representation, the minimum detectable SNR is about 15 dB for BPSK, FSK, and OOK signals and about 20 dB for QPSK signals. For the outer product spectral method, these values tend to be about 10 dB lower.

Words in Context: The Effects of Length, Frequency, and Predictability on Brain Responses During Natural Reading

PubMed Central

Schuster, Sarah; Hawelka, Stefan; Hutzler, Florian; Kronbichler, Martin; Richlan, Fabio

2016-01-01

Word length, frequency, and predictability count among the most influential variables during reading. Their effects are well-documented in eye movement studies, but pertinent evidence from neuroimaging primarily stem from single-word presentations. We investigated the effects of these variables during reading of whole sentences with simultaneous eye-tracking and functional magnetic resonance imaging (fixation-related fMRI). Increasing word length was associated with increasing activation in occipital areas linked to visual analysis. Additionally, length elicited a U-shaped modulation (i.e., least activation for medium-length words) within a brain stem region presumably linked to eye movement control. These effects, however, were diminished when accounting for multiple fixation cases. Increasing frequency was associated with decreasing activation within left inferior frontal, superior parietal, and occipito-temporal regions. The function of the latter region—hosting the putative visual word form area—was originally considered as limited to sublexical processing. An exploratory analysis revealed that increasing predictability was associated with decreasing activation within middle temporal and inferior frontal regions previously implicated in memory access and unification. The findings are discussed with regard to their correspondence with findings from single-word presentations and with regard to neurocognitive models of visual word recognition, semantic processing, and eye movement control during reading. PMID:27365297

Genetic Architecture of the Variation in Male-Specific Ossified Processes on the Anal Fins of Japanese Medaka.

PubMed

Kawajiri, Maiko; Fujimoto, Shingo; Yoshida, Kohta; Yamahira, Kazunori; Kitano, Jun

2015-10-28

Traits involved in reproduction evolve rapidly and show great diversity among closely related species. However, the genetic mechanisms that underlie the diversification of courtship traits are mostly unknown. Japanese medaka fishes (Oryzias latipes) use anal fins to attract females and to grasp females during courtship; the males have longer anal fins with male-specific ossified papillary processes on the fin rays. However, anal fin morphology varies between populations: the southern populations tend to have longer anal fins and more processes than the northern populations. In the present study, we conducted quantitative trait locus (QTL) mapping to investigate the genetic architecture underlying the variation in the number of papillary processes of Japanese medaka fish and compared the QTL with previously identified QTL controlling anal fin length. First, we found that only a few QTL were shared between anal fin length and papillary process number. Second, we found that the numbers of papillary processes on different fin rays often were controlled by different QTL. Finally, we produced another independent cross and found that some QTL were repeatable between the two crosses, whereas others were specific to only one cross. These results suggest that variation in the number of papillary processes is polygenic and controlled by QTL that are distinct from those controlling anal fin length. Thus, different courtship traits in Japanese medaka share a small number of QTL and have the potential for independent evolution. Copyright © 2015 Kawajiri et al.

Raman study of local ordering processes of solid n-alkanes

NASA Astrophysics Data System (ADS)

Hacura, A.; Zimnicka, B.; Wrzalik, R.

2016-02-01

The microphase separation of n-alkanes with different chain length was investigated by Raman spectroscopy for binary mixture rapidly quenched from the melt. The process was observed as a function of time. The first several minutes after solidification were crucial for the demixing process. For a few weeks old sample the orientational order parameters and were calculated based on the analysis of polarized spectra recorded in the area of the formed domains. The measured values are significantly greater than zero (from 0.17 to 0.32), which indicates the mutual parallel arrangement of the molecules in the domains composed of n-alkanes of the same chain length.

The Length of a Pestle: A Class Exercise in Measurement and Statistical Analysis.

ERIC Educational Resources Information Center

O'Reilly, James E.

1986-01-01

Outlines the simple exercise of measuring the length of an object as a concrete paradigm of the entire process of making chemical measurements and treating the resulting data. Discusses the procedure, significant figures, measurement error, spurious data, rejection of results, precision and accuracy, and student responses. (TW)

What Produces Television Attention and Attention Style? Genre, Situation, and Individual Differences as Predictors

ERIC Educational Resources Information Center

Hawkins, Robert P.; Pingree, Suzanne; Hitchon, Jacqueline; Radler, Barry; Gorham, Bradley W.; Kahlor, Leeann; Gilligan, Eileen; Serlin, Ronald C.; Schmidt, Toni; Kannaovakun, Prathana; Kolbeins, Gudbjorg Hildur

2005-01-01

Individual looks at television vary enormously in length, and this has previously indicated differences in ongoing cognitive processes. Furthermore, the relative frequency of looks of different lengths may indicate styles of attention to television. This article compares visual attention of 152 subjects across a variety of genres and examines…

Experimental study of switching in a rho-i(MQW)-eta vertical coupler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cavailles, J.A.; Erman, M.; Woodbridge, K.

1989-11-01

Electrically controlled switching in a vertically arranged directional coupler with GaAs/GaAIAs multiple quantum well waveguides is demonstrated. Coupling lengths and extinction parameters are determined by using a sample processed in such a way that injection conditions are well defined and that the coupler length can be varied continuously.

Mobile and embedded fast high resolution image stitching for long length rectangular monochromatic objects with periodic structure

NASA Astrophysics Data System (ADS)

Limonova, Elena; Tropin, Daniil; Savelyev, Boris; Mamay, Igor; Nikolaev, Dmitry

2018-04-01

In this paper we describe stitching protocol, which allows to obtain high resolution images of long length monochromatic objects with periodic structure. This protocol can be used for long length documents or human-induced objects in satellite images of uninhabitable regions like Arctic regions. The length of such objects can reach notable values, while modern camera sensors have limited resolution and are not able to provide good enough image of the whole object for further processing, e.g. using in OCR system. The idea of the proposed method is to acquire a video stream containing full object in high resolution and use image stitching. We expect the scanned object to have straight boundaries and periodic structure, which allow us to introduce regularization to the stitching problem and adapt algorithm for limited computational power of mobile and embedded CPUs. With the help of detected boundaries and structure we estimate homography between frames and use this information to reduce complexity of stitching. We demonstrate our algorithm on mobile device and show image processing speed of 2 fps on Samsung Exynos 5422 processor

Electronic working length determination in primary teeth by ProPex and Digital Signal Processing.

PubMed

Nelson-Filho, Paulo; Lucisano, Marcela Pacífico; Leonardo, Mário Roberto; da Silva, Raquel Assed Bezerra; da Silva, Léa Assed Bezerra

2010-12-01

The purpose of this study was to evaluate the accuracy of electronic apex locators Digital Signal Processing (DSP) and ProPex, for root canal length determination in primary teeth. Fifteen primary molars (a total of 34 root canals) were divided into two groups: Group I - without physiological resorption (n = 16); and Group II - with physiological resorption (n = 18). The length of each canal was measured by introducing a file until its tip was visible and then it was retracted 1 mm. For electronic measurement, the devices were set to 1 mm short of the apical resorption. The data were analysed statistically using the intraclass correlation coefficient (ICC). Results showed that the ICC was high for both electronic apex locators in all situations - with (ICC: DSP = 0.82 and Propex = 0.89) or without resorption (ICC: DSP = 0.92 and Propex = 0.90). Both apex locators were extremely accurate in determining the working length in primary teeth, both with or without physiological resorption. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

Importance of the Correlation between Width and Length in the Shape Analysis of Nanorods: Use of a 2D Size Plot To Probe Such a Correlation.

PubMed

Zhao, Zhihua; Zheng, Zhiqin; Roux, Clément; Delmas, Céline; Marty, Jean-Daniel; Kahn, Myrtil L; Mingotaud, Christophe

2016-08-22

Analysis of nanoparticle size through a simple 2D plot is proposed in order to extract the correlation between length and width in a collection or a mixture of anisotropic particles. Compared to the usual statistics on the length associated with a second and independent statistical analysis of the width, this simple plot easily points out the various types of nanoparticles and their (an)isotropy. For each class of nano-objects, the relationship between width and length (i.e., the strong or weak correlations between these two parameters) may suggest information concerning the nucleation/growth processes. It allows one to follow the effect on the shape and size distribution of physical or chemical processes such as simple ripening. Various electron microscopy pictures from the literature or from the authors' own syntheses are used as examples to demonstrate the efficiency and simplicity of the proposed 2D plot combined with a multivariate analysis. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modeling Menstrual Cycle Length and Variability at the Approach of Menopause Using Hierarchical Change Point Models

PubMed Central

Huang, Xiaobi; Elliott, Michael R.; Harlow, Siobán D.

2013-01-01

SUMMARY As women approach menopause, the patterns of their menstrual cycle lengths change. To study these changes, we need to jointly model both the mean and variability of cycle length. Our proposed model incorporates separate mean and variance change points for each woman and a hierarchical model to link them together, along with regression components to include predictors of menopausal onset such as age at menarche and parity. Additional complexity arises from the fact that the calendar data have substantial missingness due to hormone use, surgery, and failure to report. We integrate multiple imputation and time-to event modeling in a Bayesian estimation framework to deal with different forms of the missingness. Posterior predictive model checks are applied to evaluate the model fit. Our method successfully models patterns of women’s menstrual cycle trajectories throughout their late reproductive life and identifies change points for mean and variability of segment length, providing insight into the menopausal process. More generally, our model points the way toward increasing use of joint mean-variance models to predict health outcomes and better understand disease processes. PMID:24729638

Single-cell full-length total RNA sequencing uncovers dynamics of recursive splicing and enhancer RNAs.

PubMed

Hayashi, Tetsutaro; Ozaki, Haruka; Sasagawa, Yohei; Umeda, Mana; Danno, Hiroki; Nikaido, Itoshi

2018-02-12

Total RNA sequencing has been used to reveal poly(A) and non-poly(A) RNA expression, RNA processing and enhancer activity. To date, no method for full-length total RNA sequencing of single cells has been developed despite the potential of this technology for single-cell biology. Here we describe random displacement amplification sequencing (RamDA-seq), the first full-length total RNA-sequencing method for single cells. Compared with other methods, RamDA-seq shows high sensitivity to non-poly(A) RNA and near-complete full-length transcript coverage. Using RamDA-seq with differentiation time course samples of mouse embryonic stem cells, we reveal hundreds of dynamically regulated non-poly(A) transcripts, including histone transcripts and long noncoding RNA Neat1. Moreover, RamDA-seq profiles recursive splicing in >300-kb introns. RamDA-seq also detects enhancer RNAs and their cell type-specific activity in single cells. Taken together, we demonstrate that RamDA-seq could help investigate the dynamics of gene expression, RNA-processing events and transcriptional regulation in single cells.

Acid diffusion, standing waves, and information theory: a molecular-scale model of chemically amplified resist

NASA Astrophysics Data System (ADS)

Trefonas, Peter, III; Allen, Mary T.

1992-06-01

Shannon's information theory is adapted to analyze the photolithographic process, defining the mask pattern as the prior state. Definitions and constraints to the general theory are developed so that the information content at various stages of the lithographic process can be described. Its application is illustrated by exploring the information content within projected aerial images and resultant latent images. Next, a 3-dimensional molecular scale model of exposure, acid diffusion, and catalytic crosslinking in acid-hardened resists (AHR) is presented. In this model, initial positions of photogenerated acids are determined by probability functions generated from the aerial images and the local light intensity in the film. In order to simulate post-exposure baking processes, acids are diffused in a random walk manner, for which the catalytic chain length and the average distance between crosslinks can be set. Crosslink locations are defined in terms of the topologically minimized number required to link different chains. The size and location of polymer chains involved in a larger scale crosslinked network is established and related to polymer solubility. In this manner, the nature of the crosslinked latent image can be established. Good correlation with experimental data is found for the calculated percent insolubilization as a function of dose when the rms acid diffusion length is about 500 angstroms. Information analysis is applied in detail to the specific example of AHR chemistry. The information contained within the 3-D crosslinked latent image is explored as a function of exposure dose, catalytic chain length, average distance between crosslinks. Eopt (the exposure dose which optimizes the information contained within the latent image) was found to vary with catalytic chain length in a manner similar to that observed experimentally in a plot of E90 versus post-exposure bake time. Surprisingly, the information content of the crosslinked latent image remains high even when rms diffusion lengths are as long as 1500 angstroms. The information content of a standing wave is shown to decrease with increasing diffusion length, with essentially all standing wave information being lost at diffusion lengths greater than 450 angstroms. A unique mechanism for self-contrast enhancement and high resolution in AHR resist is proposed.

Persistance du 5ème arc aortique associé à une interruption de l’arche aortique

PubMed Central

Houssa, Mahdi Ait; Atmani, Noureddine; Bamous, Mehdi; Abdou, Abdessamad; Nya, Fouad; Seghrouchni, Anis; Amahzoune, Brahim; El Bekkali, Youssef; Drissi, Mohamed; Boulahya, Abdelatif

2017-01-01

Les auteurs rapportent un cas de persistance du 5ème arc aortique associé à une interruption totale de l'arche aortique. Ce cas clinique montre le piège diagnostic posé par la persistance du 5ème arc aortique et son effet bénéfique hémodynamique. Le tableau clinique était trompeur en préopératoire en raison de la persistance des pouls fémoraux et des signes cliniques d'un shunt gauche-droite via un large canal artériel. Le diagnostic a été redressé en peropératoire grâce au monitorage de la pression artérielle par un cathéter placé dans l'artère fémorale. PMID:29187934

Anaerobic sludge digestion in the presence of lactobacillus additive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghosh, S.; Klass, D.L.

1980-01-01

A laboratory evaluation of a lactobacillus fermentation product was performed to study its effects as an additive on the anaerobic digestion of sewage sludge under conventional and overloaded high-rate conditions. The overloaded conditions were those experienced in commercial municipal digesters. It was concluded from this work that the use of the additive at low concentrations permits digester operation at least up to double the loading of untreated digesters and at higher methane yields and volatile solids reductions without affecting effluent quality. The additive also imparts iproved digester stability and rapid response to loading rate and detention time excursions and upsets.more » The beneficial effets of the additive observed in the laboratory remain to be established with other feeds such as biomass, and in large-scale commercial digestion tests that are now in progress.« less

'Introspectionism' and the mythical origins of scientific psychology.

PubMed

Costall, Alan

2006-12-01

According to the majority of the textbooks, the history of modern, scientific psychology can be tidily encapsulated in the following three stages. Scientific psychology began with a commitment to the study of mind, but based on the method of introspection. Watson rejected introspectionism as both unreliable and effete, and redefined psychology, instead, as the science of behaviour. The cognitive revolution, in turn, replaced the mind as the subject of study, and rejected both behaviourism and a reliance on introspection. This paper argues that all three stages of this history are largely mythical. Introspectionism was never a dominant movement within modern psychology, and the method of introspection never went away. Furthermore, this version of psychology's history obscures some deep conceptual problems, not least surrounding the modern conception of "behaviour," that continues to make the scientific study of consciousness seem so weird.

Hémothorax spontané révélant une vascularite de Wegener chez une femme enceinte

PubMed Central

Serhane, Hind; Yassine, Msougar; Amro, Lamyae

2016-01-01

L’hémothorax spontané demeure une pathologie rare. Ses étiologies sont multiples mais restent parfois inconnues. Chez certains patients, la thoracotomie peut être le seul recours pour déterminer son origine. Les vascularites n’ont pas été rapporté comme cause habituelle des hémothorax spontanés. La grossesse ne semble pas avoir d’effet causal, ni aggravant des hémothorax spontanés, ni des vascularites. Nous rapportons une observation assez particulière d’une jeune patiente, présentant au cours de sa grossesse un hémothorax spontané secondaire à une vasularite de type Wegener, diagnostiquée par la biopsie pleurale faite au cours d’une thoracotomie exploratrice et confirmée par le dosage des ANCA. PMID:28154726

Cellular iron transport.

PubMed

Garrick, Michael D; Garrick, Laura M

2009-05-01

Iron has a split personality as an essential nutrient that also has the potential to generate reactive oxygen species. We discuss how different cell types within specific tissues manage this schizophrenia. The emphasis in enterocytes is on regulating the body's supply of iron by regulating transport into the blood stream. In developing red blood cells, adaptations in transport manage the body's highest flux of iron. Hepatocytes buffer the body's stock of iron. Macrophage recycle the iron from effete red cells among other iron management tasks. Pneumocytes provide a barrier to prevent illicit entry that, when at risk of breaching, leads to a need to handle the dangers in a fashion essentially shared with macrophage. We also discuss or introduce cell types including renal cells, neurons, other brain cells, and more where our ignorance, currently still vast, needs to be removed by future research.

Contrôle du marché informel à l’heure de la mondialisation des échanges. Le cas des antirétroviraux au Chili

PubMed Central

Brousselle, Astrid; Morales, Cristián

2013-01-01

Résumé Les nouveaux médicaments pour le VIH/sida ont créé des besoins d’accessibilité aux traitements que les gouvernements n’ont pas toujours réussi à couvrir. Il en résulte l’émergence d’un marché informel des ARV. Par l’analyse de la situation au Chili, nous traitons des différents créneaux d’approvisionnement, des conséquences de l’existence d’un tel marché, ainsi que des moyens envisageables pour réduire les effets indésirables. Les aspects tant microéconomiques que macroéconomiques concernant le marché et l’accessibilité aux médicaments sont abordés. PMID:23997580

Influence of fiber length on flexural and impact properties of Zalacca Midrib fiber/HDPE by compression molding

NASA Astrophysics Data System (ADS)

Pamungkas, Agil Fitri; Ariawan, Dody; Surojo, Eko; Triyono, Joko

2018-02-01

The aim of the research is to investigate the effect of fiber length on the flexural and impact properties of the composite of Zalacca Midrib Fiber (ZMF)/HDPE. The process of making composite was using compression molding method. The variation of fiber length were 1 mm, 3 mm, 5 mm, 7 mm and 9 mm, at 30% fiber volume fraction. The flexural and impact test according to ASTM D790 and ASTM D5941, respectively. Observing fracture surface was examained by using Scanning Electron Microscopy (SEM). The results showed that the flexural and impact strengths would be increase with the increase of fiber length.

VLBI geodesy - 2 parts-per-billion precision in length determinations for transcontinental baselines

NASA Technical Reports Server (NTRS)

Davis, J. L.; Herring, T. A.; Shapiro, I. I.

1988-01-01

VLBI was to make twenty-two independent measurements, between September 1984 and December 1986, of the length of the 3900-km baseline between the Mojave site in California and the Haystack/Westford site in Massachusetts. These experiments differ from the typical geodetic VLBI experiments in that a large fraction of observations is obtained at elevation angles between 4 and 10 deg. Data from these low elevation angles allow the vertical coordinate of site position, and hence the baseline length, to be estimated with greater precision. For the sixteen experiments processed thus far, the weighted root-mean-square scatter of the estimates of the baseline length is 8 mm.

A continuous analog of run length distributions reflecting accumulated fractionation events.

PubMed

Yu, Zhe; Sankoff, David

2016-11-11

We propose a new, continuous model of the fractionation process (duplicate gene deletion after polyploidization) on the real line. The aim is to infer how much DNA is deleted at a time, based on segment lengths for alternating deleted (invisible) and undeleted (visible) regions. After deriving a number of analytical results for "one-sided" fractionation, we undertake a series of simulations that help us identify the distribution of segment lengths as a gamma with shape and rate parameters evolving over time. This leads to an inference procedure based on observed length distributions for visible and invisible segments. We suggest extensions of this mathematical and simulation work to biologically realistic discrete models, including two-sided fractionation.

Comparative sacral morphology and the reconstructed tail lengths of five extinct primates: Proconsul heseloni, Epipliopithecus vindobonensis, Archaeolemur edwardsi, Megaladapis grandidieri, and Palaeopropithecus kelyus.

PubMed

Russo, Gabrielle A

2016-01-01

This study evaluated the relationship between the morphology of the sacrum-the sole bony link between the tail or coccyx and the rest of the body-and tail length (including presence/absence) and function using a comparative sample of extant mammals spanning six orders (Primates, Carnivora, Rodentia, Diprotodontia, Pilosa, Scandentia; N = 472). Phylogenetically-informed regression methods were used to assess how tail length varied with respect to 11 external and internal (i.e., trabecular) bony sacral variables with known or suspected biomechanical significance across all mammals, only primates, and only non-primates. Sacral variables were also evaluated for primates assigned to tail categories ('tailless,' 'nonprehensile short-tailed,' 'nonprehensile long-tailed,' and 'prehensile-tailed'). Compared to primates with reduced tail lengths, primates with longer tails generally exhibited sacra having larger caudal neural openings than cranial neural openings, and last sacral vertebrae with more mediolaterally-expanded caudal articular surfaces than cranial articular surfaces, more laterally-expanded transverse processes, more dorsally-projecting spinous processes, and larger caudal articular surface areas. Observations were corroborated by the comparative sample, which showed that shorter-tailed (e.g., Lynx rufus [bobcat]) and longer-tailed (e.g., Acinonyx jubatus [cheetah]) non-primate mammals morphologically converge with shorter-tailed (e.g., Macaca nemestrina) and longer-tailed (e.g., Macaca fascicularis) primates, respectively. 'Prehensile-tailed' primates exhibited last sacral vertebrae with more laterally-expanded transverse processes and greater caudal articular surface areas than 'nonprehensile long-tailed' primates. Internal sacral variables performed poorly compared to external sacral variables in analyses of extant primates, and were thus deemed less useful for making inferences concerning tail length and function in extinct primates. The tails lengths of five extinct primates were reconstructed from the external sacral variables: Archaeolemur edwardsi had a 'nonprehensile long tail,' Megaladapis grandidieri, Palaeopropithecus kelyus, and Epipliopithecus vindobonensis probably had 'nonprehensile short tails,' and Proconsul heseloni was 'tailless.' Copyright © 2015 Elsevier Ltd. All rights reserved.

The effect of stochastic modeling of ionospheric effect on the various lengths of baseline determination

NASA Astrophysics Data System (ADS)

Kwon, J.; Yang, H.

2006-12-01

Although GPS provides continuous and accurate position information, there are still some rooms for improvement of its positional accuracy, especially in the medium and long range baseline determination. In general, in case of more than 50 km baseline length, the effect of ionospheric delay is the one causing the largest degradation in positional accuracy. For example, the ionospheric delay in terms of double differenced mode easily reaches 10 cm with baseline length of 101 km. Therefore, many researchers have been tried to mitigate/reduce the effect using various modeling methods. In this paper, the optimal stochastic modeling of the ionospheric delay in terms of baseline length is presented. The data processing has been performed by constructing a Kalman filter with states of positions, ambiguities, and the ionospheric delays in the double differenced mode. Considering the long baseline length, both double differenced GPS phase and code observations are used as observables and LAMBDA has been applied to fix the ambiguities. Here, the ionospheric delay is stochastically modeled by well-known Gaussian, 1st and 3rd order Gauss-Markov process. The parameters required in those models such as correlation distance and time is determined by the least-square adjustment using ionosphere-only observables. Mainly the results and analysis from this study show the effect of stochastic models of the ionospheric delay in terms of the baseline length, models, and parameters used. In the above example with 101 km baseline length, it was found that the positional accuracy with appropriate ionospheric modeling (Gaussian) was about ±2 cm whereas it reaches about ±15 cm with no stochastic modeling. It is expected that the approach in this study contributes to improve positional accuracy, especially in medium and long range baseline determination.

Effects of Ionic Dependence of DNA Persistence Length on the DNA Condensation at Room Temperature

NASA Astrophysics Data System (ADS)

Mao, Wei; Liu, Yan-Hui; Hu, Lin; Xu, Hou-Qiang

2016-05-01

DNA persistence length is a key parameter for quantitative interpretation of the conformational properties of DNA and related to the bending rigidity of DNA. A series of experiments pointed out that, in the DNA condensation process by multivalent cations, the condensed DNA takes elongated coil or compact globule states and the population of the compact globule states increases with an increase in ionic concentration. At the same time, single molecule experiments carried out in solution with multivalent cations (such as spermidine, spermine) indicated that DNA persistence length strongly depends on the ionic concentration. In order to revolve the effects of ionic concentration dependence of persistence length on DNA condensation, a model including the ionic concentration dependence of persistence length and strong correlation of multivalent cation on DNA is provided. The autocorrelation function of the tangent vectors is found as an effective way to detect the ionic concentration dependence of toroidal conformations. With an increase in ion concentration, the first periodic oscillation contained in the autocorrelation function shifts, the number of segment contained in the first periodic oscillation decreases gradually. According to the experiments, the average long-axis length is defined to estimate the ionic concentration dependence of condensation process further. The relation between long-axis length and ionic concentration matches the experimental results qualitatively. Supported by National Natural Science Foundation of China under Grant Nos. 11047022, 11204045, 11464004 and 31360215; The Research Foundation from Ministry of Education of China (212152), Guizhou Provincial Tracking Key Program of Social Development (SY20123089, SZ20113069); The General Financial Grant from the China Postdoctoral Science Foundation (2014M562341); The Research Foundation for Young University Teachers from Guizhou University (201311); The West Light Foundation (2015) and College Innovation Talent Team of Guizhou Province, (2014) 32

Speech serial control in healthy speakers and speakers with hypokinetic or ataxic dysarthria: effects of sequence length and practice

PubMed Central

Reilly, Kevin J.; Spencer, Kristie A.

2013-01-01

The current study investigated the processes responsible for selection of sounds and syllables during production of speech sequences in 10 adults with hypokinetic dysarthria from Parkinson’s disease, five adults with ataxic dysarthria, and 14 healthy control speakers. Speech production data from a choice reaction time task were analyzed to evaluate the effects of sequence length and practice on speech sound sequencing. Speakers produced sequences that were between one and five syllables in length over five experimental runs of 60 trials each. In contrast to the healthy speakers, speakers with hypokinetic dysarthria demonstrated exaggerated sequence length effects for both inter-syllable intervals (ISIs) and speech error rates. Conversely, speakers with ataxic dysarthria failed to demonstrate a sequence length effect on ISIs and were also the only group that did not exhibit practice-related changes in ISIs and speech error rates over the five experimental runs. The exaggerated sequence length effects in the hypokinetic speakers with Parkinson’s disease are consistent with an impairment of action selection during speech sequence production. The absent length effects observed in the speakers with ataxic dysarthria is consistent with previous findings that indicate a limited capacity to buffer speech sequences in advance of their execution. In addition, the lack of practice effects in these speakers suggests that learning-related improvements in the production rate and accuracy of speech sequences involves processing by structures of the cerebellum. Together, the current findings inform models of serial control for speech in healthy speakers and support the notion that sequencing deficits contribute to speech symptoms in speakers with hypokinetic or ataxic dysarthria. In addition, these findings indicate that speech sequencing is differentially impaired in hypokinetic and ataxic dysarthria. PMID:24137121

Progress in second-generation HTS wire development and manufacturing

NASA Astrophysics Data System (ADS)

Selvamanickam, V.; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J.

2008-09-01

2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current × Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world’s first 2G device installed in the grid.

Dynamics of Phenanthrenequinone on Carbon Nano-Onion Surfaces Probed by Quasielastic Neutron Scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anjos, Daniela M; Mamontov, Eugene; Brown, Gilbert M

We used quasielastic neutron scattering (QENS) to study the dynamics of phenanthrenequinone (PQ) on the surface of onion-like carbon (OLC), or so called carbon onions, as a function of surface coverage and temperature. For both the high- and low-coverage samples, we observed two diffusion processes; a faster process and nearly an order of magnitude slower process. On the high-coverage surface, the slow diffusion process is of long-range translational character, whereas the fast diffusion process is spatially localized on the length scale of ~ 4.7 . On the low-coverage surface, both diffusion processes are spatially localized; on the same length scalemore » of ~ 4.7 for the fast diffusion and a somewhat larger length scale for the slow diffusion. Arrhenius temperature dependence is observed except for the long-range diffusion on the high-coverage surface. We attribute the fast diffusion process to the generic localized in-cage dynamics of PQ molecules, and the slow diffusion process to the long-range translational dynamics of PQ molecules, which, depending on the coverage, may be either spatially restricted, or long-range. On the low-coverage surface, uniform surface coverage is not attained, and the PQ molecules experience the effect of spatial constraints on their long-range translational dynamics. Unexpectedly, the dynamics of PQ molecules on OLC as a function of temperature and surface coverage bears qualitative resemblance to the dynamics of water molecules on oxide surfaces, including practically temperature-independent residence times for the low-coverage surface. The dynamics features that we observed may be universal across different classes of surface adsorbates.« less

Optimized Design of Spacer in Electrodialyzer Using CFD Simulation Method

NASA Astrophysics Data System (ADS)

Jia, Yuxiang; Yan, Chunsheng; Chen, Lijun; Hu, Yangdong

2018-06-01

In this study, the effects of length-width ratio and diversion trench of the spacer on the fluid flow behavior in an electrodialyzer have been investigated through CFD simulation method. The relevant information, including the pressure drop, velocity vector distribution and shear stress distribution, demonstrates the importance of optimized design of the spacer in an electrodialysis process. The results show width of the diversion trench has a great effect on the fluid flow compared with length. Increase of the diversion trench width could strength the fluid flow, but also increase the pressure drop. Secondly, the dead zone of the fluid flow decreases with increase of length-width ratio of the spacer, but the pressure drop increases with the increase of length-width ratio of the spacer. So the appropriate length-width ratio of the space should be moderate.

Effect of Pin Length on Hook Size and Joint Properties in Friction Stir Lap Welding of 7B04 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Wang, Min; Zhang, Huijie; Zhang, Jingbao; Zhang, Xiao; Yang, Lei

2014-05-01

Friction stir lap welding of 7B04 aluminum alloy was conducted in the present paper, and the effect of pin length on hook size and joint properties was investigated in detail. It is found that for each given set of process parameters, the size of hook defect on the advancing side shows an "M" type evolution trend as the pin length is increased. The affecting characteristics of pin length on joint properties are dependent on the heat input levels. When the heat input is low, the fracture strength is firstly increased to a peak value and then shows a decrease. When the heat input is relatively high, the evolution trend of fracture strength tends to exhibit a "W" type with increasing the pin length.

Nuclear Localization of Vascular Endothelial Growth Factor-D and Regulation of c-Myc–Dependent Transcripts in Human Lung Fibroblasts

PubMed Central

Pacheco-Rodriguez, Gustavo; Malide, Daniela; Meza-Carmen, Victor; Kato, Jiro; Cui, Ye; Padilla, Philip I.; Samidurai, Arun; Gochuico, Bernadette R.

2014-01-01

Lymphangiogenesis and angiogenesis are processes that are, in part, regulated by vascular endothelial growth factor (VEGF)-D. The formation of lymphatic structures has been implicated in multiple lung diseases, including pulmonary fibrosis. VEGF-D is a secreted protein produced by fibroblasts and macrophages, which induces lymphangiogenesis by signaling via VEGF receptor-3, and angiogenesis through VEGF receptor-2. VEGF-D contains a central VEGF homology domain, which is the biologically active domain, with flanking N- and C-terminal propeptides. Full-length VEGF-D (∼ 50 kD) is proteolytically processed in the extracellular space, to generate VEGF homology domain that contains the VEGF-D receptor–binding sites. Here, we report that, independent of its cell surface receptors, full-length VEGF-D accumulated in nuclei of fibroblasts, and that this process appears to increase with cell density. In nuclei, full-length VEGF-D associated with RNA polymerase II and c-Myc. In cells depleted of VEGF-D, the transcriptionally regulated genes appear to be modulated by c-Myc. These findings have potential clinical implications, as VEGF-D was found in fibroblast nuclei in idiopathic pulmonary fibrosis, a disease characterized by fibroblast proliferation. These findings are consistent with actions of full-length VEGF-D in cellular homeostasis in health and disease, independent of its receptors. PMID:24450584

Phenomenologie et caractérisation des supraconducteurs à haute T_c

NASA Astrophysics Data System (ADS)

Peyral, P.; Lebeau, C.; Rosenblatt, J.; Burin, J. P.; Raboutou, A.; Pena, Q.; Perrin, C.

1991-11-01

Transport properties of high T_c superconductors depend on the microscopic structure of the ideal material and on the mesoscopic characteristics of each sample. From an experimental point of view it is essential to separate their efrects. This can be done by describing quantitatively the resistive transition in zero field as a two-step process : a superconducting intragranular transition and an intergranular coherence transition. Well-known theories of critical fluctuations and Gaussian fluctuations allow us to obtain important characteristic parameters of the intragranular material such as the critical temperature, the normal resistivity and the width of the critical region. Les propriétés de transport des supraconducteurs dépendent à la fois de la structure microscopique du matériau idéal et des caractéristiques mésoscopiques (la granularité) de chaque échantillon. Du point de vue expérimental il est essentiel de pouvoir séparer leurs effet respectifs. Nous parvenons à cette séparation en décrivant quantitativement la transition résistive sous champ nul en deux étapes: supraconductrice intragranulaire et cohérente intergranulaire. Des théories connues des fluctuations critiques et gaussiennes nous permettent alors d'obtenir des paramètres importants pour la caractérisation du matériau intragranulaire, comme sa température critique, sa résistivité normale et la largeur de sa région critique.

Formation of unexpected silicon- and disiloxane-bridged multiferrocenyl derivatives bearing Si-O-CH[double bond, length as m-dash]CH2 and Si-(CH2)2C(CH3)3 substituents via cleavage of tetrahydrofuran and trapping of its ring fragments.

PubMed

Bruña, Sonia; González-Vadillo, Ana Mª; Ferrández, Marta; Perles, Josefina; Montero-Campillo, M Merced; Mó, Otilia; Cuadrado, Isabel

2017-09-12

The formation of a family of silicon- and siloxane-bridged multiferrocenyl derivatives carrying different functional groups attached to silicon, including Fc 2 (CH 3 ) 3 C(CH 2 ) 2 SiCH[double bond, length as m-dash]CH 2 (5), Fc 2 (CH 2 [double bond, length as m-dash]CH-O)SiCH[double bond, length as m-dash]CH 2 (6), Fc 2 (OH)SiCH[double bond, length as m-dash]CH 2 (7), Fc 2 (CH 2 [double bond, length as m-dash]CH-O)Si-O-Si(O-CH[double bond, length as m-dash]CH 2 )Fc 2 (8) and Fc 2 (CH 2 [double bond, length as m-dash]CH-O)Si-O-SiFc 3 (9) is described. Silyl vinyl ether molecules 6, 8 and 9 and the heteroleptic vinylsilane 5 resulted from the competing metathesis reaction of lithioferrocene (FcLi), CH 2 [double bond, length as m-dash]CH-OLi or (CH 3 ) 3 C(CH 2 ) 2 Li with the corresponding multifunctional chlorosilane, Cl 3 SiCH[double bond, length as m-dash]CH 2 or Cl 3 Si-O-SiCl 3 . The last two organolithium species have been likely formed in situ by fragmentation of the tetrahydrofuran solvent. Diferrocenylvinyloxyvinylsilane 6 is noteworthy since it represents a rare example of a redox-active silyl mononomer in which two different C[double bond, length as m-dash]C polymerisable groups are directly connected to silicon. The molecular structures of the silicon-containing multiferrocenyl species 5, 6, 8 and 9 have been investigated by single-crystal X-ray diffraction studies, demonstrating the capture and storage processes of two ring fragments resulting from the cleavage of cyclic THF in redox-active and stable crystalline organometallic compounds. From electrochemical studies we found that by changing the anion of the supporting electrolyte from [PF 6 ] - to [B(C 6 F 5 ) 4 ] - , the redox behaviour of tetrametallic disiloxane 8 can be switched from a poorly resolved multistep redox process to four consecutive well-separated one-electron oxidations, corresponding to the sequential oxidation of the four ferrocenyl moieties.

Coiled-coil length: Size does matter.

PubMed

Surkont, Jaroslaw; Diekmann, Yoan; Ryder, Pearl V; Pereira-Leal, Jose B

2015-12-01

Protein evolution is governed by processes that alter primary sequence but also the length of proteins. Protein length may change in different ways, but insertions, deletions and duplications are the most common. An optimal protein size is a trade-off between sequence extension, which may change protein stability or lead to acquisition of a new function, and shrinkage that decreases metabolic cost of protein synthesis. Despite the general tendency for length conservation across orthologous proteins, the propensity to accept insertions and deletions is heterogeneous along the sequence. For example, protein regions rich in repetitive peptide motifs are well known to extensively vary their length across species. Here, we analyze length conservation of coiled-coils, domains formed by an ubiquitous, repetitive peptide motif present in all domains of life, that frequently plays a structural role in the cell. We observed that, despite the repetitive nature, the length of coiled-coil domains is generally highly conserved throughout the tree of life, even when the remaining parts of the protein change, including globular domains. Length conservation is independent of primary amino acid sequence variation, and represents a conservation of domain physical size. This suggests that the conservation of domain size is due to functional constraints. © 2015 Wiley Periodicals, Inc.

Effect of double layers on magnetosphere-ionosphere coupling

NASA Technical Reports Server (NTRS)

Lysak, Robert L.; Hudson, Mary K.

1987-01-01

The Earth's auroral zone contains dynamic processes occurring on scales from the length of an auroral zone field line which characterizes Alfven wave propagation to the scale of microscopic processes which occur over a few Debye lengths. These processes interact in a time-dependent fashion since the current carried by the Alfven waves can excite microscopic turbulence which can in turn provide dissipation of the Alfven wave energy. This review will first describe the dynamic aspects of auroral current structures with emphasis on consequences for models of microscopic turbulence. A number of models of microscopic turbulence will be introduced into a large-scale model of Alfven wave propagation to determine the effect of various models on the overall structure of auroral currents. In particular, the effects of a double layer electric field which scales with the plasma temperature and Debye length is compared with the effect of anomalous resistivity due to electrostatic ion cyclotron turbulence in which the electric field scales with the magnetic field strength. It is found that the double layer model is less diffusive than in the resistive model leading to the possibility of narrow, intense current structures.

A fast processing route of aspheric polydimethylsiloxane lenses array (APLA) and optical characterization for smartphone microscopy

NASA Astrophysics Data System (ADS)

Fuh, Yiin-Kuen; Lai, Zheng-Hong

2017-02-01

A fast processing route of aspheric polydimethylsiloxane (PDMS) lenses array (APLA) is proposed via the combined effect of inverted gravitational and heat-assisted forces. The fabrication time can be dramatically reduced to 30 s, compared favorably to the traditional duration of 2 hours of repeated cycles of addition-curing processes. In this paper, a low-cost flexible lens can be fabricated by repeatedly depositing, inverting, curing a hanging transparent PDMS elastomer droplet on a previously deposited curved structure. Complex structures with aspheric curve features and various focal lengths can be successfully produced and the fabricated 4 types of APLA have various focal lengths in the range of 7.03 mm, 6.00 mm, 5.33 mm, and 4.43 mm, respectively. Empirically, a direct relationship between the PDMS volume and focal lengths of the lenses can be experimentally deducted. Using these fabricated APLA, an ordinary commercial smartphone camera can be easily transformed to a low-cost, portable digital microscopy (50×magnification) such that point of care diagnostic can be implemented pervasively.

Dynamic photoinduced realignment processes in photoresponsive block copolymer films: effects of the chain length and block copolymer architecture.

PubMed

Sano, Masami; Shan, Feng; Hara, Mitsuo; Nagano, Shusaku; Shinohara, Yuya; Amemiya, Yoshiyuki; Seki, Takahiro

2015-08-07

A series of block copolymers composed of an amorphous poly(butyl methacrylate) (PBMA) block connected with an azobenzene (Az)-containing liquid crystalline (PAz) block were synthesized by changing the chain length and polymer architecture. With these block copolymer films, the dynamic realignment process of microphase separated (MPS) cylinder arrays of PBMA in the PAz matrix induced by irradiation with linearly polarized light was studied by UV-visible absorption spectroscopy, and time-resolved grazing incidence small angle X-ray scattering (GI-SAXS) measurements using a synchrotron beam. Unexpectedly, the change in the chain length hardly affected the realignment rate. In contrast, the architecture of the AB-type diblock or the ABA-type triblock essentially altered the realignment feature. The strongly cooperative motion with an induction period before realignment was characteristic only for the diblock copolymer series, and the LPL-induced alignment change immediately started for triblock copolymers and the PAz homopolymer. Additionally, a marked acceleration in the photoinduced dynamic motions was unveiled in comparison with a thermal randomization process.

Infant Growth in Length Follows Prolonged Sleep and Increased Naps

PubMed Central

Lampl, Michelle; Johnson, Michael L.

2011-01-01

Study Objectives: The mechanisms underlying infant sleep irregularity are unknown. This study tests the hypothesis that sleep and episodic (saltatory) growth in infant length are temporally coupled processes. Study design: Daily parental diaries continuously recorded sleep onset and awakening for 23 infants (14 females) over 4-17 months (n = 5798 daily records). Multiple model-independent methods compared day-to-day sleep patterns and saltatory length growth. Measurements and Results: Approximate entropy (ApEn) quantified temporal irregularity in infant sleep patterns; breastfeeding and infant sex explained 44% of inter-individual variance (P = 0.001). Random effects mixed-model regression identified that saltatory length growth was associated with increased total daily sleep hours (P < 0.001) and number of sleep bouts (P = 0.001), with breastfeeding, infant sex, and age as covariates. Infant size and illness onset were non-contributory. CLUSTER analysis identified peaks in individual sleep of 4.5 more h and/or 3 more naps per day, compared to intervening intervals, that were non-randomly concordant with saltatory length growth for all individuals (P < 0.05), with a time lag of 0-4 days. Subject-specific probabilities of a growth saltation associated with sleep included a median odds ratio of 1.20 for each additional hour (n = 8, 95% CI 1.15 to 1.29) and 1.43 for each additional sleep bout (n = 12, 95% CI 1.21-2.03). Increased sleep bout duration predicted weight (P < 0.001) and abdominal skinfold accrual (P = 0.05) contingent on length growth, and truncal adiposity independent of growth (P < 0.001). Conclusions: Sleeping and length growth are temporally related biological processes, suggesting an integrated anabolic system. Infant behavioral state changes may reflect biological mechanisms underlying the timing and control of human growth. Citation: Lampl M; Johnson ML. Infant growth in length follows prolonged sleep and increased naps. SLEEP 2011;34(5):641-650. PMID:21532958

Sarcomere length-dependence of activity-dependent twitch potentiation in mouse skeletal muscle

PubMed Central

Rassier, Dilson E; MacIntosh, Brian R

2002-01-01

Background It has been reported that potentiation of a skeletal muscle twitch response is proportional to muscle length with a negative slope during staircase, and a positive slope during posttetanic potentiation. This study was done to directly compare staircase and posttetanic responses with measurement of sarcomere length to compare their length-dependence. Methods Mouse extensor digitorum longus (EDL) muscles were dissected to small bundles of fibers, which permit measurement of sarcomere length (SL), by laser diffraction. In vitro fixed-end contractions of EDL fiber bundles were elicited at 22°C and 35°C at sarcomere lengths ranging from 2.35 μm to 3.85 μm. Twitch contractions were assessed before and after 1.5 s of 75 Hz stimulation at 22°C or during 10 s of 10 Hz stimulation at 22°C or 35°C. Results Staircase potentiation was greater at 35°C than 22°C, and the relative magnitude of the twitch contraction (Pt*/Pt) was proportional to sarcomere length with a negative slope, over the range 2.3 μm – 3.7 μm. Linear regression yielded the following: Pt*/Pt = -0.59·SL+3.27 (r2 = 0.74); Pt*/Pt = -0.39·SL+2.34 (r2 = 0.48); and Pt*/Pt = -0.50·SL+2.45 (r2 = 0.80) for staircase at 35°C, and 22°C and posttetanic response respectively. Posttetanic depression rather than potentiation was present at long SL. This indicates that there may be two processes operating in these muscles to modulate the force: one that enhances and a second that depresses the force. Either or both of these processes may have a length-dependence of its mechanism. Conclusion There is no evidence that posttetanic potentiation is fundamentally different from staircase in these muscles. PMID:12475395

Geometrical properties of a discontinuity network in gneissic rock, a case study in high alpine terrain

NASA Astrophysics Data System (ADS)

Koppensteiner, Matthias; Zangerl, Christian

2017-04-01

For the purposes of estimating slope stability and investigating landslide formation processes, it is indispensable to obtain information about the discontinuity properties of the rock mass. These properties control failure processes, deformation behaviour and groundwater flow. Scanline measurements represent a systematic surveying method, however they make certain demands in case of natural outcorps in a high alpine terrain. The performance of the scanline method is tested and the thereby obtained and evaluated data is compared to findings from other studies. An area of a well exposed, fractured rock mass composed of granodioritic gneisses in the Oetztal-Stubai crytalline basement of the Alps (Austria) has been chosen to perform the investigations. Eight scanlines have been measured on a single hillside with varying lengths between 8 and 30 meters. The orientations of the scanlines have been varied in order to minimize the sampling bias associated with the angle between the scanlines and the intersected discontinuities. For every intersecting discontinuity at a certain tape length, the orientation, the trace length and the terminations of the trace have been recorded. Primarily, the discontinuity data from all scanlines have been analyzed with the software package Dips (Rocscience, 1989) in order to determine their allocation in sets. For the evaluation of the spacing and trace length properties, two scripts have been developed in the language Matlab (The MathWorks, 1984) to faciliate setwise processing of the entire dataset. Variation of the scanline directions and lengths returned homogeneous sample sizes for the individual discontinuity sets. Both, normal spacings and trace lengths show negative exponential distributions for all sets. A comparison of four different methods to estimate trace lengths show that the result is highly dependent on the chosen method itself. However, when the relation of the results for the respective sets within one of the methods is considered, the consistency is obvious. Scanline measurements and analyses provide siginificant results for discontinuity properties under the described circumstances. Considering sampling biases, the obtained dataset is even benefiting from the randomized sampling process, due to the natural terrain. The scanline survey provides a statistical database which can be used for rock mass characterization. Geometrical rock mass characterization is essential to model the in-situ block size distribution, to estimate the degree of fracturing and rock mass anisotropy for quarry oder tunnelling projects or define the mechanical rock mass properties based on classifications systems. The study should contribute a reference for the development and application of other methods for investigating discontinuity properties in instable rock masses.

A new method for analyzing the refill process and fabrication of a piezoelectric inkjet printing head for LCD color filter manufacturing

NASA Astrophysics Data System (ADS)

Moon, Kang Seok; Choi, Jung Hoon; Choi, Dong-June; Kim, Sun Ho; Hyo Ha, Man; Nam, Hyo-Jin; Kim, Min Soo

2008-12-01

This paper presents a method for analyzing the refill process of a piezoelectric inkjet printing head with a high firing frequency for color filter manufacturing. Theoretical and experimental studies on the equivalent length (Leq) versus jetting characteristics were performed. The new model has shown quantitatively the same result compared with a commercialized simulation code. Also it is identified that the refill time increases with the equivalent liquid length (Leq) because the viscous force increases. The inkjet printing head has been designed with a lumped model analysis and fabricated with a silicon wafer (1 0 0) by a MEMS process. To investigate how the equivalent length (Leq) influences the firing frequency, an experiment was conducted using a stroboscope. In the case of colorant ink, it is possible to eject an ink droplet up to 5 kHz with a 40 pl drop volume. On the other hand, the firing frequency calculated with the new model is about 3 kHz under the condition of the equivalent liquid length (Leq), 250 µm. The difference between the new model and experiment may be a result of a mismatch of initial meniscus position due to the meniscus oscillation. Experimentally the meniscus oscillation is observed through an optical measurement with a visualization apparatus and a transparent nozzle. Hence the efficiency of the new model may be enhanced in a high viscosity range. The methods for increasing the firing frequency are to reduce the equivalent length (Leq) and to modify the ink property. Because the former tends to decrease a viscous loss and the latter tends to increase a viscous damping, two parameters should be combined adequately within an allowable drop volume.

Light microscopy and image analysis of thin filament lengths utilizing dual probes on beef, chicken, and rabbit myofibrils.

PubMed

Ringkob, T P; Swartz, D R; Greaser, M L

2004-05-01

Image analysis procedures for immunofluorescence microscopy were developed to measure muscle thin filament lengths of beef, rabbit, and chicken myofibrils. Strips of beef cutaneous trunci, rectus abdominis, psoas, and masseter; chicken pectoralis; and rabbit psoas muscles were excised 5 to 30 min postmortem. Fluorescein phalloidin and rhodamine myosin subfragment-1 (S1) were used to probe the myofibril structure. Digital images were recorded with a cooled charge-coupled device controlled with IPLab Spectrum software (Signal Analytics Corp.) on a Macintosh operating system. The camera was attached to an inverted microscope, using both the phase-contrast and fluorescence illumination modes. Unfixed myofibrils incubated with fluorescein phalloidin showed fluorescence primarily at the Z-line and the tips of the thin filaments in the overlap region. Images were processed using IPLab and the National Institutes of Health's Image software. A region of interest was selected and scaled by a factor of 18.18, which enlarged the image from 11 pixels/microm to approximately 200 pixels/microm. An X-Y plot was exported to Spectrum 1.1 (Academic Software Development Group), where the signal was processed with a second derivative routine, so a cursor function could be used to measure length. Fixation before phalloidin incubation resulted in greatest intensity at the Z lines but a more-uniform staining over the remainder of the thin filament zone. High-resolution image capture and processing showed that thin filament lengths were significantly different (P < 0.01) among beef, rabbit, and chicken, with lengths of 1.28 to 1.32 microm, 1.16 microm, and 1.05 microm, respectively. Measurements using the S1 signal confirmed the phalloidin results. Fluorescent probes may be useful to study sarcomere structure and help explain species and muscle differences in meat texture.

Perception of Non-Native Consonant Length Contrast: The Role of Attention in Phonetic Processing

ERIC Educational Resources Information Center

Porretta, Vincent J.; Tucker, Benjamin V.

2015-01-01

The present investigation examines English speakers' ability to identify and discriminate non-native consonant length contrast. Three groups (L1 English No-Instruction, L1 English Instruction, and L1 Finnish control) performed a speeded forced-choice identification task and a speeded AX discrimination task on Finnish non-words (e.g.…

Pseudocromata, a new genus of Ochlerini based on a new species from Ecuador (Discocephalinae: Pentatomidae)

USDA-ARS?s Scientific Manuscript database

In addition to the carinate metasternum, in Cromata the labrum equals the length of the first labial segment, whereas in Pseudocromata the labrum equals the length of the first two labial segments. The males of Pseudocromata do not have the dorsal process extending from the 7th abdominal tergite fou...

Assessing Children's Understanding of Length Measurement: A Focus on Three Key Concepts

ERIC Educational Resources Information Center

Bush, Heidi

2009-01-01

In this article, the author presents three different tasks that can be used to assess students' understanding of the concept of length. Three important measurement concepts for students to understand are transitive reasoning, use of identical units, and iteration. In any teaching and learning process it is important to acknowledge students'…

"Serial" Effects in Parallel Models of Reading

ERIC Educational Resources Information Center

Chang, Ya-Ning; Furber, Steve; Welbourne, Stephen

2012-01-01

There is now considerable evidence showing that the time to read a word out loud is influenced by an interaction between orthographic length and lexicality. Given that length effects are interpreted by advocates of dual-route models as evidence of serial processing this would seem to pose a serious challenge to models of single word reading which…

Lumber recovery from incense-cedar in central California.

Treesearch

Pong W.Y.; James M. Cahill

1988-01-01

A sample of 130 incense-cedar (Libocedrus decurrens Torr.) trees was selected from the Eldorado National Forest in California. The trees were felled and bucked into 403 woods-length logs and processed through a sawmill cutting Shop and Common grades of lumber. Recovery estimates are shown for woods-length logs based on Scribner board-foot scale and...

Staying at the Top: Playing Position and Performance Affect Career Length in Professional Sport

ERIC Educational Resources Information Center

Baker, Joseph; Koz, Dan; Kungl, Ann-Marie; Fraser-Thomas, Jessica; Schorer, Jorg

2013-01-01

In an effort to understand the process of skill acquisition and decline, researchers have largely neglected a critical aspect of this development--maximizing time at the highest levels of achievement. This study examined length of career for professional athletes in basketball, football, ice hockey, and baseball and considers whether career length…

Phrase Length Matters: The Interplay between Implicit Prosody and Syntax in Korean "Garden Path" Sentences

ERIC Educational Resources Information Center

Hwang, Hyekyung; Steinhauer, Karsten

2011-01-01

In spoken language comprehension, syntactic parsing decisions interact with prosodic phrasing, which is directly affected by phrase length. Here we used ERPs to examine whether a similar effect holds for the on-line processing of written sentences during silent reading, as suggested by theories of "implicit prosody." Ambiguous Korean sentence…

HOT PRESSING WITH A TEMPERATURE GRADIENT

DOEpatents

Hausner, H.H.

1958-05-20

A method is described for producing powder metal compacts with a high length to width ratio, which are of substantially uniform density. The process consists in arranging a heating coil around the die and providing a temperature gradient along the length of the die with the highest temperature at the point of the compact farthest away from the ram or plunger.

Diameter sensors for tree-length harvesting systems

Treesearch

T.P. McDonald; Robert B. Rummer; T.E. Grift

2003-01-01

Most cut-to-length (CTL) harvesters provide sensors for measuring diameter of trees as they are cut and processed. Among other uses, this capability provides a data collection tool for marketing of logs in real time. Logs can be sorted and stacked based on up-to-date market information, then transportation systems optimized to route wood to proper destinations at...

Phrase Length and Prosody in On-Line Ambiguity Resolution

ERIC Educational Resources Information Center

Webman-Shafran, Ronit; Fodor, Janet Dean

2016-01-01

We investigated the processing of ambiguous double-PP constructions in Hebrew. Selection restrictions forced the first prepositional phrase (PP1) to attach low, but PP2 could attach maximally high to VP or maximally low to the NP inside PP1. A length contrast in PP2 was also examined. This construction affords more potential locations for prosodic…

Constraints on food chain length arising from regional metacommunity dynamics

PubMed Central

Calcagno, Vincent; Massol, François; Mouquet, Nicolas; Jarne, Philippe; David, Patrice

2011-01-01

Classical ecological theory has proposed several determinants of food chain length, but the role of metacommunity dynamics has not yet been fully considered. By modelling patchy predator–prey metacommunities with extinction–colonization dynamics, we identify two distinct constraints on food chain length. First, finite colonization rates limit predator occupancy to a subset of prey-occupied sites. Second, intrinsic extinction rates accumulate along trophic chains. We show how both processes concur to decrease maximal and average food chain length in metacommunities. This decrease is mitigated if predators track their prey during colonization (habitat selection) and can be reinforced by top-down control of prey vital rates (especially extinction). Moreover, top-down control of colonization and habitat selection can interact to produce a counterintuitive positive relationship between perturbation rate and food chain length. Our results show how novel limits to food chain length emerge in spatially structured communities. We discuss the connections between these constraints and the ones commonly discussed, and suggest ways to test for metacommunity effects in food webs. PMID:21367786

Effect of extending grating length and width on human visually evoked potentials.

PubMed

Mihaylova, Milena S; Hristov, Ivan; Racheva, Kalina; Totev, Tsvetalin; Mitov, Dimitar

2015-01-01

Visually evoked potentials (VEPs) were elicited by Gabor gratings with different lengths and widths at three spatial frequencies (SFs): low, 1.45 c/deg, medium, 2.9 c/deg and high, 5.8 c/deg and at a contrast 3 times above the detection threshold at each SF. An increase of grating length enhanced N1 amplitude at occipital and parietal positions stronger than the increase of grating width at aspect ratios (length : width) above 4:1. The stronger effect of stimulus length than width was reflected also in the amplitude of the later P1 component at central and parietal positions. The larger effect of stimulus length than width on the VEP amplitude was SF specific: it was stronger at 5.8 c/deg, smaller at 2.9 c/deg and vanished at 1.45 c/deg. The results obtained suggest anisotropy in the physiological mechanisms that underlie grating perception and involve bottom- up processes initiated in the occipital cortex.

Identification of 4th intercostal space using sternal notch to xiphoid length for accurate electrocardiogram lead placement.

PubMed

Day, Kevin; Oliva, Isabel; Krupinski, Elizabeth; Marcus, Frank

2015-01-01

Precordial ECG lead placement is difficult in obese patients with increased chest wall soft tissues due to inaccurate palpation of the intercostal spaces. We investigated whether the length of the sternum (distance between the sternal notch and xiphoid process) can accurately predict the location of the 4th intercostal space, which is the traditional location for V1 lead position. Fifty-five consecutive adult chest computed tomography examinations were reviewed for measurements. The sternal notch to right 4th intercostal space distance was 67% of the sternal notch to xiphoid process length with an overall correlation of r=0.600 (p<0.001). The above measurement may be utilized to locate the 4th intercostal space for accurate placement of the precordial electrodes in adults in whom the 4th intercostal space cannot be found by physical exam. Copyright © 2015 Elsevier Inc. All rights reserved.

Benchmarking sheath subgrid boundary conditions for macroscopic-scale simulations

NASA Astrophysics Data System (ADS)

Jenkins, T. G.; Smithe, D. N.

2015-02-01

The formation of sheaths near metallic or dielectric-coated wall materials in contact with a plasma is ubiquitous, often giving rise to physical phenomena (sputtering, secondary electron emission, etc) which influence plasma properties and dynamics both near and far from the material interface. In this paper, we use first-principles PIC simulations of such interfaces to formulate a subgrid sheath boundary condition which encapsulates fundamental aspects of the sheath behavior at the interface. Such a boundary condition, based on the capacitive behavior of the sheath, is shown to be useful in fluid simulations wherein sheath scale lengths are substantially smaller than scale lengths for other relevant physical processes (e.g. radiofrequency wavelengths), in that it enables kinetic processes associated with the presence of the sheath to be numerically modeled without explicit resolution of spatial and temporal sheath scales such as electron Debye length or plasma frequency.

Magnetic alloy nanowire arrays with different lengths: Insights into the crossover angle of magnetization reversal process

NASA Astrophysics Data System (ADS)

Samanifar, S.; Alikhani, M.; Almasi Kashi, M.; Ramazani, A.; Montazer, A. H.

2017-05-01

Nanoscale magnetic alloy wires are being actively investigated, providing fundamental insights into tuning properties in magnetic data storage and processing technologies. However, previous studies give trivial information about the crossover angle of magnetization reversal process in alloy nanowires (NWs). Here, magnetic alloy NW arrays with different compositions, composed of Fe, Co and Ni have been electrochemically deposited into hard-anodic aluminum oxide templates with a pore diameter of approximately 150 nm. Under optimized conditions of alumina barrier layer and deposition bath concentrations, the resulting alloy NWs with aspect ratio and saturation magnetization (Ms) up to 550 and 1900 emu cm-3, respectively, are systematically investigated in terms of composition, crystalline structure and magnetic properties. Using angular dependence of coercivity extracted from hysteresis loops, the reversal processes are evaluated, indicating non-monotonic behavior. The crossover angle (θc) is found to depend on NW length and Ms. At a constant Ms, increasing NW length decreases θc, thereby decreasing the involvement of vortex mode during the magnetization reversal process. On the other hand, decreasing Ms decreases θc in large aspect ratio (>300) alloy NWs. Phenomenologically, it is newly found that increasing Ni content in the composition decreases θc. The angular first-order reversal curve (AFORC) measurements including the irreversibility of magnetization are also investigated to gain a more detailed insight into θc.

[Regional anaesthesia as advantage in competition between hospitals. Strategic market analysis].

PubMed

Heller, A R; Bauer, K R; Eberlein-Gonska, M; Albrecht, D M; Koch, T

2009-05-01

The German Social Act V section sign 12 is aimed towards competition, efficiency and quality in healthcare. Because surgical departments are billing standard diagnosis-related group (DRG) case costs to health insurance companies, they claim best value for money for internal services. Thus, anaesthesia concepts are being closely scrutinized. The present analysis was performed to gain economic arguments for the strategic positioning of regional anaesthesia procedures into clinical pathways. Surgical procedures, which in 2005 had a relevant caseload in Germany, were chosen in which regional anaesthesia procedures (alone or in combination with general anaesthesia) could routinely be used. The structure of costs and earnings for hospital services, split by types and centres of cost, as well as by underlying procedures are contained in the annually updated public accessible dataset (DRG browser) of the German Hospital Reimbursement Institute (InEK). For the year 2005 besides own data, national anaesthesia staffing costs are available from the German Society of Anaesthesiology (DGAI). The curve of earnings per DRG can be calculated from the 2005 InEK browser. This curve intersects by the cost curve at the point of national mean length of stay. The cost curve was calculated by process-oriented distribution of cost centres over the length of stay and allows benchmarking within the national competitive environment. For comparison of process times data from our local database were used. While the InEK browser lacks process times, the cost positions 5.1-5.3 (staffing costs anaesthesia) and the national structure adjusted anaesthesia staffing costs 2005 as published by the DGAI, were used to calculate nationwide mean available anaesthesia times which were compared with own process times. Within the portfolio diagram of lengths of stay for each DRG and process times most procedures are located in the economic lower left, in particular those with high case mix (length of stay and anaesthesia times below reimbursement relevant national mean). The driver of increased earnings is shortening length of stay. Our use of regional anaesthesia is 5 to 10-fold higher than national benchmarks and may contribute to our advantageous position in national competition. The annual increases in profit per DRG range between EUR 1,706 and EUR 467,359 and compensate by far the investment of regional anaesthesia derived pain management, besides the advantage of increased patient satisfaction and avoidance of complications. Regional anaesthesia is a considerable value driver in clinical pathways by shortening length of stay. The present analysis further demonstrates that time for regional block performance is covered by anaesthesia reimbursement within the DRG costing schedule.

Paraxial design of an optical element with variable focal length and fixed position of principal planes.

PubMed

Mikš, Antonín; Novák, Pavel

2018-05-10

In this article, we analyze the problem of the paraxial design of an active optical element with variable focal length, which maintains the positions of its principal planes fixed during the change of its optical power. Such optical elements are important in the process of design of complex optical systems (e.g., zoom systems), where the fixed position of principal planes during the change of optical power is essential for the design process. The proposed solution is based on the generalized membrane tunable-focus fluidic lens with several membrane surfaces.

A comparison between conventional and digital radiography in root canal working length determination.

PubMed

Farida, Abesi; Maryam, Ehsani; Ali, Mirzapour; Ehsan, Moudi; Sajad, Yousefi; Soraya, Khafri

2013-01-01

Obtaining a correct working length is necessary for successful root canal treatment. The aim of this study was to compare conventional and digital radiography in measuring root canal working length. In this in vitro study 20 mesio buccal canal from maxillary first molars with moderate and severe curvature and 20 canal form anterior teeth with mild curvature were chosen and their working length were measured with number 15 k file (Maillefer, DENTSPLY, Germany). Then for each canal five radiographies were taken, three conventional radiographies using three methods of processing: Manual, automatic, and monobath solution; in addition to two other digital radiographies using CCD and PSP receptors. Two independent observers measured working length in each technique. Finally, the mean of working length in each group was compared with real working length using a paired T-test. Also a one-way ANOVA test was used for comparing the two groups. The level of statistical significance was P < 0.05. The results have shown that there was a high interobserver agreement on the measurements of the working length in conventional and digital radiography (P ≤ 0.001). Also there was no significant difference between conventional and digital radiography in measuring working length (P > 0.05). Therefore it was concluded that the accuracy of digital radiography is comparable with conventional radiography in measuring working length, so considering the advantages of the digital radiography, it can be used for working length determination.

Reversibility in Quantum Models of Stochastic Processes

NASA Astrophysics Data System (ADS)

Gier, David; Crutchfield, James; Mahoney, John; James, Ryan

Natural phenomena such as time series of neural firing, orientation of layers in crystal stacking and successive measurements in spin-systems are inherently probabilistic. The provably minimal classical models of such stochastic processes are ɛ-machines, which consist of internal states, transition probabilities between states and output values. The topological properties of the ɛ-machine for a given process characterize the structure, memory and patterns of that process. However ɛ-machines are often not ideal because their statistical complexity (Cμ) is demonstrably greater than the excess entropy (E) of the processes they represent. Quantum models (q-machines) of the same processes can do better in that their statistical complexity (Cq) obeys the relation Cμ >= Cq >= E. q-machines can be constructed to consider longer lengths of strings, resulting in greater compression. With code-words of sufficiently long length, the statistical complexity becomes time-symmetric - a feature apparently novel to this quantum representation. This result has ramifications for compression of classical information in quantum computing and quantum communication technology.

Study of injection moulded long glass fibre-reinforced polypropylene and the effect on the fibre length and orientation distribution

NASA Astrophysics Data System (ADS)

Parveeen, B.; Caton-Rose, P.; Costa, F.; Jin, X.; Hine, P.

2014-05-01

Long glass fibre (LGF) composites are extensively used in manufacturing to produce components with enhanced mechanical properties. Long fibres with length 12 to 25mm are added to a thermoplastic matrix. However severe fibre breakage can occur in the injection moulding process resulting in shorter fibre length distribution (FLD). The majority of this breakage occurs due to the melt experiencing extreme shear stress during the preparation and injection stage. Care should be taken to ensure that the longer fibres make it through the injection moulding process without their length being significantly degraded. This study is based on commercial 12 mm long glass-fibre reinforced polypropylene (PP) and short glass fibre Nylon. Due to the semi-flexiable behaviour of long glass fibres, the fibre orientation distribution (FOD) will differ from the orientation distribution of short glass fibre in an injection molded part. In order to investigate the effect the change in fibre length has on the fibre orientation distribution or vice versa, FOD data was measured using the 2D section image analyser. The overall purpose of the research is to show how the orientation distribution chnages in an injection moulded centre gated disc and end gated plaque geometry and to compare this data against fibre orientation predictions obtained from Autodesk Moldflow Simulation Insight.

Determining geometric error model parameters of a terrestrial laser scanner through Two-face, Length-consistency, and Network methods

PubMed Central

Wang, Ling; Muralikrishnan, Bala; Rachakonda, Prem; Sawyer, Daniel

2017-01-01

Terrestrial laser scanners (TLS) are increasingly used in large-scale manufacturing and assembly where required measurement uncertainties are on the order of few tenths of a millimeter or smaller. In order to meet these stringent requirements, systematic errors within a TLS are compensated in-situ through self-calibration. In the Network method of self-calibration, numerous targets distributed in the work-volume are measured from multiple locations with the TLS to determine parameters of the TLS error model. In this paper, we propose two new self-calibration methods, the Two-face method and the Length-consistency method. The Length-consistency method is proposed as a more efficient way of realizing the Network method where the length between any pair of targets from multiple TLS positions are compared to determine TLS model parameters. The Two-face method is a two-step process. In the first step, many model parameters are determined directly from the difference between front-face and back-face measurements of targets distributed in the work volume. In the second step, all remaining model parameters are determined through the Length-consistency method. We compare the Two-face method, the Length-consistency method, and the Network method in terms of the uncertainties in the model parameters, and demonstrate the validity of our techniques using a calibrated scale bar and front-face back-face target measurements. The clear advantage of these self-calibration methods is that a reference instrument or calibrated artifacts are not required, thus significantly lowering the cost involved in the calibration process. PMID:28890607

A Comparison of One Time Pad Random Key Generation using Linear Congruential Generator and Quadratic Congruential Generator

NASA Astrophysics Data System (ADS)

Apdilah, D.; Harahap, M. K.; Khairina, N.; Husein, A. M.; Harahap, M.

2018-04-01

One Time Pad algorithm always requires a pairing of the key for plaintext. If the length of keys less than a length of the plaintext, the key will be repeated until the length of the plaintext same with the length of the key. In this research, we use Linear Congruential Generator and Quadratic Congruential Generator for generating a random number. One Time Pad use a random number as a key for encryption and decryption process. Key will generate the first letter from the plaintext, we compare these two algorithms in terms of time speed encryption, and the result is a combination of OTP with LCG faster than the combination of OTP with QCG.

Cross-language perception of Japanese vowel length contrasts: comparison of listeners from different first language backgrounds.

PubMed

Tsukada, Kimiko; Hirata, Yukari; Roengpitya, Rungpat

2014-06-01

The purpose of this research was to compare the perception of Japanese vowel length contrasts by 4 groups of listeners who differed in their familiarity with length contrasts in their first language (L1; i.e., American English, Italian, Japanese, and Thai). Of the 3 nonnative groups, native Thai listeners were expected to outperform American English and Italian listeners, because vowel length is contrastive in their L1. Native Italian listeners were expected to demonstrate a higher level of accuracy for length contrasts than American English listeners, because the former are familiar with consonant (but not vowel) length contrasts (i.e., singleton vs. geminate) in their L1. A 2-alternative forced-choice AXB discrimination test that included 125 trials was administered to all the participants, and the listeners' discrimination accuracy (d') was reported. As expected, Japanese listeners were more accurate than all 3 nonnative groups in their discrimination of Japanese vowel length contrasts. The 3 nonnative groups did not differ from one another in their discrimination accuracy despite varying experience with length contrasts in their L1. Only Thai listeners were more accurate in their length discrimination when the target vowel was long than when it was short. Being familiar with vowel length contrasts in L1 may affect the listeners' cross-language perception, but it does not guarantee that their L1 experience automatically results in efficient processing of length contrasts in unfamiliar languages. The extent of success may be related to how length contrasts are phonetically implemented in listeners' L1.

Length oscillation mimicking periodic individual deep inspirations during tidal breathing attenuates force recovery and adaptation in airway smooth muscle.

PubMed

Raqeeb, Abdul; Solomon, Dennis; Paré, Peter D; Seow, Chun Y

2010-11-01

Airway smooth muscle (ASM) is able to generate maximal force under static conditions, and this isometric force can be maintained over a large length range due to length adaptation. The increased force at short muscle length could lead to excessive narrowing of the airways. Prolonged exposure of ASM to submaximal stimuli also increases the muscle's ability to generate force in a process called force adaptation. To date, the effects of length and force adaptation have only been demonstrated under static conditions. In the mechanically dynamic environment of the lung, ASM is constantly subjected to periodic stretches by the parenchyma due to tidal breathing and deep inspiration. It is not known whether force recovery due to muscle adaptation to a static environment could occur in a dynamic environment. In this study the effect of length oscillation mimicking tidal breathing and deep inspiration was examined. Force recovery after a length change was attenuated in the presence of length oscillation, except at very short lengths. Force adaptation was abolished by length oscillation. We conclude that in a healthy lung (with intact airway-parenchymal tethering) where airways are not allowed to narrow excessively, large stretches (associated with deep inspiration) may prevent the ability of the muscle to generate maximal force that would occur under static conditions irrespective of changes in mean length; mechanical perturbation on ASM due to tidal breathing and deep inspiration, therefore, is the first line of defense against excessive bronchoconstriction that may result from static length and force adaptation.

All-optical, thermo-optical path length modulation based on the vanadium-doped fibers.

PubMed

Matjasec, Ziga; Campelj, Stanislav; Donlagic, Denis

2013-05-20

This paper presents an all-fiber, fully-optically controlled, optical-path length modulator based on highly absorbing optical fiber. The modulator utilizes a high-power 980 nm pump diode and a short section of vanadium-co-doped single mode fiber that is heated through absorption and a non-radiative relaxation process. The achievable path length modulation range primarily depends on the pump's power and the convective heat-transfer coefficient of the surrounding gas, while the time response primarily depends on the heated fiber's diameter. An absolute optical length change in excess of 500 µm and a time-constant as short as 11 ms, were demonstrated experimentally. The all-fiber design allows for an electrically-passive and remote operation of the modulator. The presented modulator could find use within various fiber-optics systems that require optical (remote) path length control or modulation.

Unravelling the Gordian knot! Key processes impacting overwintering larval survival and growth: A North Sea herring case study

NASA Astrophysics Data System (ADS)

Hufnagl, Marc; Peck, Myron A.; Nash, Richard D. M.; Dickey-Collas, Mark

2015-11-01

Unraveling the key processes affecting marine fish recruitment will ultimately require a combination of field, laboratory and modelling studies. We combined analyzes of long-term (30-year) field data on larval fish abundance, distribution and length, and biophysical model simulations of different levels of complexity to identify processes impacting the survival and growth of autumn- and winter-spawned Atlantic herring (Clupea harengus) larvae. Field survey data revealed interannual changes in intensity of utilization of the five major spawning grounds (Orkney/Shetland, Buchan, Banks north, Banks south, and Downs) as well as spatio-temporal variability in the length and abundance of overwintered larvae. The mean length of larvae captured in post-winter surveys was negatively correlated to the proportion of larvae from the southern-most (Downs) winter-spawning component. Furthermore, the mean length of larvae originating from all spawning components has decreased since 1990 suggesting ecosystem-wide changes impacting larval growth potential, most likely due to changes in prey fields. A simple biophysical model assuming temperature-dependent growth and constant mortality underestimated larval growth rates suggesting that larval mortality rates steeply declined with increasing size and/or age during winter as no match with field data could be obtained. In contrast better agreement was found between observed and modelled post-winter abundance for larvae originating from four spawning components when a more complex, physiological-based foraging and growth model was employed using a suite of potential prey field and size-based mortality scenarios. Nonetheless, agreement between field and model-derived estimates was poor for larvae originating from the winter-spawned Downs component. In North Sea herring, the dominant processes impacting larval growth and survival appear to have shifted in time and space highlighting how environmental forcing, ecosystem state and other factors can form a Gordian knot of marine fish recruitment processes. We highlight gaps in process knowledge and recommend specific field, laboratory and modelling studies which, in our opinion, are most likely to unravel the dominant processes and advance predictive capacity of the environmental regulation of recruitment in autumn and winter-spawned fishes in temperate areas such as herring in the North Sea.

Potential for yield improvement in combined rip-first and crosscut-first rough mill processing

Treesearch

Ed Thomas; Urs Buehlmann

2016-01-01

Traditionally, lumber cutting systems in rough mills have either first ripped lumber into wide strips and then crosscut the resulting strips into component lengths (rip-first), or first crosscut the lumber into component lengths, then ripped the segments to the required widths (crosscut-first). Each method has its advantages and disadvantages. Crosscut-first typically...

Individual condition and stream temperature influences early maturation of rainbow and steelhead trout, Oncorhynchus mykiss

Treesearch

John R. McMillan; Jason B. Dunham; Gordon H. Reeves; Justin S. Mills; Chris E. Jordan

2012-01-01

Alternative male phenotypes in salmonine fishes arise from individuals that mature as larger and older anadromous marine-migrants or as smaller and younger freshwater residents. To better understand the processes influencing the expression of these phenotypes we examined the influences of growth in length (fork length) and whole body lipid content in rainbow trout (...

Intensity of geodynamic processes in the Lithuanian part of the Curonian Spit

NASA Astrophysics Data System (ADS)

Česnulevičius, Algimantas; Morkūnaitė, Regina; Bautrėnas, Artūras; Bevainis, Linas; Ovodas, Donatas

2017-06-01

The paper considers conditions and intensity of aeolian and dune slope transformation processes occurring in the wind-blown sand strips of the dunes of the Curonian Spit. An assessment of the intensity of aeolian processes was made based on the analysis of climatic factors and in situ observations. Transformations in aeolian relief forms were investigated based on the comparison of geodetic measurements and measurements of aerial photographs. Changes in micro-terraces of dune slopes were investigated through comparison of the results of repeated levelling and measurements of aerial photographs. The periods of weak, medium, and strong winds were distinguished, and sand moisture fluctuations affecting the beginning of aeolian processes were investigated. The wind-blown sand movements were found to start when sand moisture decreased by 2 % in the surface sand layer and by up to 5 % at a depth of 10 cm. In 2004-2016, the wind-blown sand movements affected the size of reference deflation relief forms: scarp length by 8 %, scarp width by 35 %, pothole length by 80 %, pothole width by 80 %, roll length by 17 %, roll width by 18 %, hollow length by 17 %, and hollow width by 39 %. The elementary relief forms in the leeward eastern slopes of the dunes experienced the strongest transformations. During a period of 5 months, the height of micro-terraces of the eastern slope of the Parnidis Dune changed from 0.05 to 0.64 cm. The change was related to fluctuations in precipitation intensity: in July-August 2016 the amount of precipitation increased 1.6-fold compared with the multiannual average, thus causing the change in the position of terrace ledges by 21 %.

Validation of New Process Models for Large Injection-Molded Long-Fiber Thermoplastic Composite Structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Jin, Xiaoshi; Wang, Jin

2012-02-23

This report describes the work conducted under the CRADA Nr. PNNL/304 between Battelle PNNL and Autodesk whose objective is to validate the new process models developed under the previous CRADA for large injection-molded LFT composite structures. To this end, the ARD-RSC and fiber length attrition models implemented in the 2013 research version of Moldflow was used to simulate the injection molding of 600-mm x 600-mm x 3-mm plaques from 40% glass/polypropylene (Dow Chemical DLGF9411.00) and 40% glass/polyamide 6,6 (DuPont Zytel 75LG40HSL BK031) materials. The injection molding was performed by Injection Technologies, Inc. at Windsor, Ontario (under a subcontract by Oakmore » Ridge National Laboratory, ORNL) using the mold offered by the Automotive Composite Consortium (ACC). Two fill speeds under the same back pressure were used to produce plaques under slow-fill and fast-fill conditions. Also, two gating options were used to achieve the following desired flow patterns: flows in edge-gated plaques and in center-gated plaques. After molding, ORNL performed measurements of fiber orientation and length distributions for process model validations. The structure of this report is as follows. After the Introduction (Section 1), Section 2 provides a summary of the ARD-RSC and fiber length attrition models. A summary of model implementations in the latest research version of Moldflow is given in Section 3. Section 4 provides the key processing conditions and parameters for molding of the ACC plaques. The validations of the ARD-RSC and fiber length attrition models are presented and discussed in Section 5. The conclusions will be drawn in Section 6.« less

All-fiber, long-active-length Fabry-Perot strain sensor.

PubMed

Pevec, Simon; Donlagic, Denis

2011-08-01

This paper presents a high-sensitivity, all-silica, all-fiber Fabry-Perot strain-sensor. The proposed sensor provides a long active length, arbitrary length of Fabry-Perot cavity, and low intrinsic temperature sensitivity. The sensor was micro-machined from purposely-developed sensor-forming fiber that is etched and directly spliced to the lead-in fiber. This manufacturing process has good potential for cost-effective, high-volume production. Its measurement range of over 3000 µε, and strain-resolution better than 1 µε were demonstrated by the application of a commercial, multimode fiber-based signal processor.

Reducing pre-operative length of stay for enterocutaneous fistula repair with a multi-disciplinary approach.

PubMed

Chamberlain, Mark; Dwyer, Rebecca

2015-01-01

Pre-operative assessment of complex surgical patients can be a lengthy process, albeit essential to minimise complication rates. In a tertiary referral unit specialising in the surgical repair of entercutaneous fistulas, a baseline audit revealed an average in-patient length of stay of 30.1 days, mainly caused by poor co-ordination between specialities. After the introduction of a weekly multi-disciplinary team meeting and the formalisation of a patient pathway, this admission length was reduced to 5.7 days (p<0.01), resulting in significant savings to the department.

Ultrasonic Relaxation Study of 1-Alkyl-3-methylimidazolium-Based Room-Temperature Ionic Liquids: Probing the Role of Alkyl Chain Length in the Cation.

PubMed

Zorębski, Michał; Zorębski, Edward; Dzida, Marzena; Skowronek, Justyna; Jężak, Sylwia; Goodrich, Peter; Jacquemin, Johan

2016-04-14

Ultrasound absorption spectra of four 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imides were determined as a function of the alkyl chain length on the cation from 1-propyl to 1-hexyl from 293.15 to 323.15 K at ambient pressure. Herein, the ultrasound absorption measurements were carried out using a standard pulse technique within a frequency range from 10 to 300 MHz. Additionally, the speed of sound, density, and viscosity have been measured. The presence of strong dissipative processes during the ultrasound wave propagation was found experimentally, i.e., relaxation processes in the megahertz range were observed for all compounds over the whole temperature range. The relaxation spectra (both relaxation amplitude and relaxation frequency) were shown to be dependent on the alkyl side chain length of the 1-alkyl-3-methylimidazolium ring. In most cases, a single-Debye model described the absorption spectra very well. However, a comparison of the determined spectra with the spectra of a few other imidazolium-based ionic liquids reported in the literature (in part recalculated in this work) shows that the complexity of the spectra increases rapidly with the elongation of the alkyl chain length on the cation. This complexity indicates that both the volume viscosity and the shear viscosity are involved in relaxation processes even in relatively low frequency ranges. As a consequence, the sound velocity dispersion is present at relatively low megahertz frequencies.

High-Throughput Image Analysis of Fibrillar Materials: A Case Study on Polymer Nanofiber Packing, Alignment, and Defects in Organic Field Effect Transistors.

PubMed

Persson, Nils E; Rafshoon, Joshua; Naghshpour, Kaylie; Fast, Tony; Chu, Ping-Hsun; McBride, Michael; Risteen, Bailey; Grover, Martha; Reichmanis, Elsa

2017-10-18

High-throughput discovery of process-structure-property relationships in materials through an informatics-enabled empirical approach is an increasingly utilized technique in materials research due to the rapidly expanding availability of data. Here, process-structure-property relationships are extracted for the nucleation, growth, and deposition of semiconducting poly(3-hexylthiophene) (P3HT) nanofibers used in organic field effect transistors, via high-throughput image analysis. This study is performed using an automated image analysis pipeline combining existing open-source software and new algorithms, enabling the rapid evaluation of structural metrics for images of fibrillar materials, including local orientational order, fiber length density, and fiber length distributions. We observe that microfluidic processing leads to fibers that pack with unusually high density, while sonication yields fibers that pack sparsely with low alignment. This is attributed to differences in their crystallization mechanisms. P3HT nanofiber packing during thin film deposition exhibits behavior suggesting that fibers are confined to packing in two-dimensional layers. We find that fiber alignment, a feature correlated with charge carrier mobility, is driven by increasing fiber length, and that shorter fibers tend to segregate to the buried dielectric interface during deposition, creating potentially performance-limiting defects in alignment. Another barrier to perfect alignment is the curvature of P3HT fibers; we propose a mechanistic simulation of fiber growth that reconciles both this curvature and the log-normal distribution of fiber lengths inherent to the fiber populations under consideration.

Optical lenses design and experimental investigations of a dynamic focusing unit for a CO2 laser scanning system

NASA Astrophysics Data System (ADS)

Chen, Wei; Xu, Yue; Zhang, Huaxin; Liu, Peng; Jiao, Guohua

2016-09-01

Laser scanners are critical components in material processing systems, such as welding, cutting, and drilling. To achieve high-accuracy processing, the laser spot size should be small and uniform in the entire objective flat field. However, traditional static focusing method using F-theta objective lens is limited by the narrow flat field. To overcome these limitations, a dynamic focusing unit consisting of two lenses is presented in this paper. The dual-lens system has a movable plano-concave lens and a fixed convex lens. As the location of the movable optical elements is changed, the focal length is shifted to keep a small focus spot in a broad flat processing filed. The optical parameters of the two elements are theoretical analyzed. The spot size is calculated to obtain the relationship between the moving length of first lens and the shift focus length of the system. Also, the Zemax model of the optical system is built up to verify the theoretical design and optimize the optical parameter. The proposed lenses are manufactured and a test system is built up to investigate their performances. The experimental results show the spot size is smaller than 450um in all the 500*500mm 2 filed with CO2 laser. Compared with the other dynamic focusing units, this design has fewer lenses and no focusing spot in the optical path. In addition, the focal length minimal changes with the shit of incident laser beam.

Key performance indicators in intensive care medicine. A retrospective matched cohort study.

PubMed

Kastrup, M; von Dossow, V; Seeling, M; Ahlborn, R; Tamarkin, A; Conroy, P; Boemke, W; Wernecke, K-D; Spies, Claudia

2009-01-01

Expert panel consensus was used to develop evidence-based process indicators that were independent risk factors for the main clinical outcome parameters of length of stay in the intensive care unit (ICU) and mortality. In a retrospective, matched data analysis of patients from five ICUs at a tertiary university hospital, agreed process indicators (sedation monitoring, pain monitoring, mean arterial pressure [MAP] >or= 60 mmHg, tidal volume [TV] or= 80 and or= 60 mmHg and BG >or= 80 mg/dl were relevant for survival. Linear regression of the 634 patients showed that analgesia monitoring, PIP or= 60 mmHg, BG >or= 80 mg/dl and

Dimensional threshold for fracture linkage and hooking

NASA Astrophysics Data System (ADS)

Lamarche, Juliette; Chabani, Arezki; Gauthier, Bertrand D. M.

2018-03-01

Fracture connectivity in rocks depends on spatial properties of the pattern including length, abundance and orientation. When fractures form a single-strike set, they hardly cross-cut each other and the connectivity is limited. Linkage probability increases with increasing fracture abundance and length as small fractures connect to each other to form longer ones. A process for parallel fracture linkage is the "hooking", where two converging fracture tips mutually deviate and then converge to connect due to the interaction of their crack-tip stresses. Quantifying the processes and conditions for fracture linkage in single-strike fracture sets is crucial to better predicting fluid flow in Naturally Fractured Reservoirs. For 1734 fractures in Permian shales of the Lodève Basin, SE France, we measured geometrical parameters in 2D, characterizing three stages of the hooking process: underlapping, overlapping and linkage. We deciphered the threshold values, shape ratios and limiting conditions to switch from one stage to another one. The hook set up depends on the spacing (S) and fracture length (Lh) with the relation S ≈ 0.15 Lh. Once the hooking is initiated, with the fracture deviation length (L) L ≈ 0.4 Lh, the fractures reaches the linkage stage only when the spacing is reduced to S ≈ 0.02 Lh and the convergence (C) is < 0.1 L. These conditions apply to multi-scale fractures with a shape ratio L/S = 10 and for fracture curvature of 10°-20°.

On the effective Stefan-Boltzmann law and the thermodynamic origin of the initial radiation density in warm inflation

NASA Astrophysics Data System (ADS)

Gim, Yongwan; Kim, Wontae

2018-01-01

In this presentation, we are going to explain the thermodynamic origin of warm inflation scenarios by using the effetive Stefan-Boltzmann law. In the warm inflation scenarios, radiation always exists to avoid the graceful exit problem, for which the radiation energy density should be assumed to be finite at the starting point of the warm inflation. To find out the origin of the non-vanishing initial radiation energy density, we derive an effective Stefan-Boltzmann law by considering the non-vanishing trace of the total energy-momentum tensors. The effective Stefan-Boltzmann law successfully shows where the initial radiation energy density is thermodynamically originated from. And by using the above effective Stefan-Boltzmann law, we also study the cosmological scalar perturbation, and obtain the sufficient radiation energy density in order for GUT baryogenesis at the end of inflation. This proceeding is based on Ref. [1

Effects of Self-Esteem and Mortality Salience on Attitudes Toward Canadian Security: Exploring the Significance of Implicit-Explicit and Personal-Collective Distinctions (Les Effets de L’Estime de soi et de la Pregnance de la Mort sur les Attitudes a L’Egard de la Securite Canadienne: Analyse de L’Importance des Distinctions entre Implicite et Explicite d’une Part et entre Personnel et Collectif D’Autre Part)

DTIC Science & Technology

2011-04-01

la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC Toronto TR... la gestion de la terreur, c’est parce que les êtres humains sont les seuls à posséder la capacité de comprendre la finitude de la vie qu’ils ont...entre autres l’adhésion à une vision du monde culturellement significative et un sentiment de sécurité basé sur l’estime de soi. À ce jour,

Fabrication de couches minces a memoire de forme et effets de l'irradiation ionique

NASA Astrophysics Data System (ADS)

Goldberg, Florent

1998-09-01

Nickel and titanium when combined in the right stoichiometric proportion (1:1) can form alloys showing the shape memory effect. Within the scope of this thesis, thin films of such alloys have been successfully produced by sputtering. Precise control of composition is crucial in order to obtain the shape memory effect. A combination of analytical tools which can accurately determine the behavior of such materials is also required (calorimetric analysis, crystallography, composition analysis, etc.). Rutherford backscattering spectrometry has been used for quantitative composition analysis. Thereafter irradiation of films with light ions (He+) of few MeV was shown to allow lowering of the characteristic premartensitic transformation temperatures while preserving the shape memory effect. Those results open the door to a new field of research, particularly for ion irradiation and its potential use as a tool to modify the thermomechanical behavior of shape memory thin film actuators.

La carence en vitamine D chez l'adulte au Gabon: cas isolé ou problème méconnu?

PubMed Central

Ntyonga-Pono, Marie-Pierrette

2014-01-01

La carence en vitamine D chez l'adulte est un sujet d'actualité à cause de ses multiples effets et de son extension de par le monde. Cependant elle est peu explorée au Gabon et en Afrique centrale en général. Le but de cet article qui rapporte trois cas documentés de carence en vitamine D chez l'adulte au Gabon, est d'attirer l'attention sur l'existence de ce problème même en zone équatoriale ensoleillée. Vu les implications de cette carence dans diverses pathologies osseuses, cardio-vasculaires, métaboliques, infectieuses, auto-immunes, néoplasiques..., des recherches plus approfondies sont nécessaires pour cerner le problème et prendre des mesures appropriées. PMID:25815104

Émission spontanée amplifiée (ÉSA) dans une structure à double cavité verticale (Bi-VCSEL)

NASA Astrophysics Data System (ADS)

Boucher, Y.; Gayraud, L.

2004-11-01

Nous présentons une étude théorique de l'Émission Spontanée Amplifiée dans une structure verticale à double cavité, décrite en termes de couplage d'ondes. Chaque cavité y est représentée par un saut de phase, tandis que les puits quantiques sont assimilés à des singularités de Dirac de la permittivité. Les sources sont prises en compte dans le cadre du formalisme des matrices de transfert étendues (3 × 3), qui inclut la saturation des zones actives sous l'effet du champ interne. Dans le plan spectral, celui-ci apparaît, au même titre que le champ émis, filtré par la fonction de transfert bimode de la structure.

Effet de l'énergie du faisceau d'ions servant à l'assistance du dépôt de matériaux organiques utilisés pour réaliser des diodes électroluminescentes

NASA Astrophysics Data System (ADS)

Antony, R.; Moliton, A.; Ratier, B.

1998-06-01

Light emitting diode based on the structure ITO/Alq3/Ca-Al lead to enhanced quantum efficiency when the Alq3 active layer is obtained by IBAD (Ion Beam Assisted Deposition): with Iodine ions, the optimization (quantum efficiency multiplied by a factor10) is obtained for an ion energy equal to 100eV. La réalisation de diodes électroluminescentes basées sur la structure ITO/Alq3/Ca-Al conduit à des performances améliorées lorsque le dépôt de la couche active Alq3 est effectué avec l'assistance d'un faisceau d'ions; l'optimisation (rendement quantique interne accru d'un ordre de grandeur) correspond à des ions Iode d'énergie 100eV.

The Harvard Automated Processing Pipeline for Electroencephalography (HAPPE): Standardized Processing Software for Developmental and High-Artifact Data.

PubMed

Gabard-Durnam, Laurel J; Mendez Leal, Adriana S; Wilkinson, Carol L; Levin, April R

2018-01-01

Electroenchephalography (EEG) recordings collected with developmental populations present particular challenges from a data processing perspective. These EEGs have a high degree of artifact contamination and often short recording lengths. As both sample sizes and EEG channel densities increase, traditional processing approaches like manual data rejection are becoming unsustainable. Moreover, such subjective approaches preclude standardized metrics of data quality, despite the heightened importance of such measures for EEGs with high rates of initial artifact contamination. There is presently a paucity of automated resources for processing these EEG data and no consistent reporting of data quality measures. To address these challenges, we propose the Harvard Automated Processing Pipeline for EEG (HAPPE) as a standardized, automated pipeline compatible with EEG recordings of variable lengths and artifact contamination levels, including high-artifact and short EEG recordings from young children or those with neurodevelopmental disorders. HAPPE processes event-related and resting-state EEG data from raw files through a series of filtering, artifact rejection, and re-referencing steps to processed EEG suitable for time-frequency-domain analyses. HAPPE also includes a post-processing report of data quality metrics to facilitate the evaluation and reporting of data quality in a standardized manner. Here, we describe each processing step in HAPPE, perform an example analysis with EEG files we have made freely available, and show that HAPPE outperforms seven alternative, widely-used processing approaches. HAPPE removes more artifact than all alternative approaches while simultaneously preserving greater or equivalent amounts of EEG signal in almost all instances. We also provide distributions of HAPPE's data quality metrics in an 867 file dataset as a reference distribution and in support of HAPPE's performance across EEG data with variable artifact contamination and recording lengths. HAPPE software is freely available under the terms of the GNU General Public License at https://github.com/lcnhappe/happe.

The Harvard Automated Processing Pipeline for Electroencephalography (HAPPE): Standardized Processing Software for Developmental and High-Artifact Data

PubMed Central

Gabard-Durnam, Laurel J.; Mendez Leal, Adriana S.; Wilkinson, Carol L.; Levin, April R.

2018-01-01

Electroenchephalography (EEG) recordings collected with developmental populations present particular challenges from a data processing perspective. These EEGs have a high degree of artifact contamination and often short recording lengths. As both sample sizes and EEG channel densities increase, traditional processing approaches like manual data rejection are becoming unsustainable. Moreover, such subjective approaches preclude standardized metrics of data quality, despite the heightened importance of such measures for EEGs with high rates of initial artifact contamination. There is presently a paucity of automated resources for processing these EEG data and no consistent reporting of data quality measures. To address these challenges, we propose the Harvard Automated Processing Pipeline for EEG (HAPPE) as a standardized, automated pipeline compatible with EEG recordings of variable lengths and artifact contamination levels, including high-artifact and short EEG recordings from young children or those with neurodevelopmental disorders. HAPPE processes event-related and resting-state EEG data from raw files through a series of filtering, artifact rejection, and re-referencing steps to processed EEG suitable for time-frequency-domain analyses. HAPPE also includes a post-processing report of data quality metrics to facilitate the evaluation and reporting of data quality in a standardized manner. Here, we describe each processing step in HAPPE, perform an example analysis with EEG files we have made freely available, and show that HAPPE outperforms seven alternative, widely-used processing approaches. HAPPE removes more artifact than all alternative approaches while simultaneously preserving greater or equivalent amounts of EEG signal in almost all instances. We also provide distributions of HAPPE's data quality metrics in an 867 file dataset as a reference distribution and in support of HAPPE's performance across EEG data with variable artifact contamination and recording lengths. HAPPE software is freely available under the terms of the GNU General Public License at https://github.com/lcnhappe/happe. PMID:29535597

Method and apparatus for timing of laser beams in a multiple laser beam fusion system

DOEpatents

Eastman, Jay M.; Miller, Theodore L.

1981-01-01

The optical path lengths of a plurality of comparison laser beams directed to impinge upon a common target from different directions are compared to that of a master laser beam by using an optical heterodyne interferometric detection technique. The technique consists of frequency shifting the master laser beam and combining the master beam with a first one of the comparison laser beams to produce a time-varying heterodyne interference pattern which is detected by a photo-detector to produce an AC electrical signal indicative of the difference in the optical path lengths of the two beams which were combined. The optical path length of this first comparison laser beam is adjusted to compensate for the detected difference in the optical path lengths of the two beams. The optical path lengths of all of the comparison laser beams are made equal to the optical path length of the master laser beam by repeating the optical path length adjustment process for each of the comparison laser beams. In this manner, the comparison laser beams are synchronized or timed to arrive at the target within .+-.1.times.10.sup.-12 second of each other.

Applications of dewetting in micro and nanotechnology.

PubMed

Gentili, Denis; Foschi, Giulia; Valle, Francesco; Cavallini, Massimiliano; Biscarini, Fabio

2012-06-21

Dewetting is a spontaneous phenomenon where a thin film on a surface ruptures into an ensemble of separated objects, like droplets, stripes, and pillars. Spatial correlations with characteristic distance and object size emerge spontaneously across the whole dewetted area, leading to regular motifs with long-range order. Characteristic length scales depend on film thickness, which is a convenient and robust technological parameter. Dewetting is therefore an attractive paradigm for organizing a material into structures of well-defined micro- or nanometre-size, precisely positioned on a surface, thus avoiding lithographical processes. This tutorial review introduces the reader to the physical-chemical basis of dewetting, shows how the dewetting process can be applied to different functional materials with relevance in technological applications, and highlights the possible strategies to control the length scales of the dewetting process.

AZTEC. Parallel Iterative method Software for Solving Linear Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchinson, S.; Shadid, J.; Tuminaro, R.

1995-07-01

AZTEC is an interactive library that greatly simplifies the parrallelization process when solving the linear systems of equations Ax=b where A is a user supplied n X n sparse matrix, b is a user supplied vector of length n and x is a vector of length n to be computed. AZTEC is intended as a software tool for users who want to avoid cumbersome parallel programming details but who have large sparse linear systems which require an efficiently utilized parallel processing system. A collection of data transformation tools are provided that allow for easy creation of distributed sparse unstructured matricesmore » for parallel solutions.« less

Cycles, scaling and crossover phenomenon in length of the day (LOD) time series

NASA Astrophysics Data System (ADS)

Telesca, Luciano

2007-06-01

The dynamics of the temporal fluctuations of the length of the day (LOD) time series from January 1, 1962 to November 2, 2006 were investigated. The power spectrum of the whole time series has revealed annual, semi-annual, decadal and daily oscillatory behaviors, correlated with oceanic-atmospheric processes and interactions. The scaling behavior was analyzed by using the detrended fluctuation analysis (DFA), which has revealed two different scaling regimes, separated by a crossover timescale at approximately 23 days. Flicker-noise process can describe the dynamics of the LOD time regime involving intermediate and long timescales, while Brownian dynamics characterizes the LOD time series for small timescales.

What is a melody? On the relationship between pitch and brightness of timbre.

PubMed

Cousineau, Marion; Carcagno, Samuele; Demany, Laurent; Pressnitzer, Daniel

2013-01-01

Previous studies showed that the perceptual processing of sound sequences is more efficient when the sounds vary in pitch than when they vary in loudness. We show here that sequences of sounds varying in brightness of timbre are processed with the same efficiency as pitch sequences. The sounds used consisted of two simultaneous pure tones one octave apart, and the listeners' task was to make same/different judgments on pairs of sequences varying in length (one, two, or four sounds). In one condition, brightness of timbre was varied within the sequences by changing the relative level of the two pure tones. In other conditions, pitch was varied by changing fundamental frequency, or loudness was varied by changing the overall level. In all conditions, only two possible sounds could be used in a given sequence, and these two sounds were equally discriminable. When sequence length increased from one to four, discrimination performance decreased substantially for loudness sequences, but to a smaller extent for brightness sequences and pitch sequences. In the latter two conditions, sequence length had a similar effect on performance. These results suggest that the processes dedicated to pitch and brightness analysis, when probed with a sequence-discrimination task, share unexpected similarities.

Conditional self-discrimination enhances dendritic spine number and dendritic length at prefrontal cortex and hippocampal neurons of rats.

PubMed

Penagos-Corzo, Julio C; Bonilla, Andrea; Rodríguez-Moreno, Antonio; Flores, Gonzalo; Negrete-Díaz, José V

2015-11-01

We studied conditional self-discrimination (CSD) in rats and compared the neuronal cytoarchitecture of untrained animals and rats that were trained in self-discrimination. For this purpose, we used thirty 10-week-old male rats were randomized into three groups: one control group and two conditioning groups: a comparison group (associative learning) and an experimental group (self-discrimination). At the end of the conditioning process, the experimental group managed to discriminate their own state of thirst. After the conditioning process, dendritic morphological changes in the pyramidal neurons of the prefrontal cortex and CA1 region of the dorsal hippocampus were evaluated using Golgi-Cox stain method and then analyzed by the Sholl method. Differences were found in total dendritic length and spine density. Animals trained in self-discrimination showed an increase in the dendritic length and the number of dendritic spines of neurons of the prefrontal cortex and CA1 region of the dorsal hippocampus. Our data suggest that conditional self-discrimination improves the connectivity of the prefrontal cortex and dorsal CA1, which has implications for memory and learning processes. © 2015 Wiley Periodicals, Inc.

Condensation on superhydrophobic surfaces: the role of local energy barriers and structure length scale.

PubMed

Enright, Ryan; Miljkovic, Nenad; Al-Obeidi, Ahmed; Thompson, Carl V; Wang, Evelyn N

2012-10-09

Water condensation on surfaces is a ubiquitous phase-change process that plays a crucial role in nature and across a range of industrial applications, including energy production, desalination, and environmental control. Nanotechnology has created opportunities to manipulate this process through the precise control of surface structure and chemistry, thus enabling the biomimicry of natural surfaces, such as the leaves of certain plant species, to realize superhydrophobic condensation. However, this "bottom-up" wetting process is inadequately described using typical global thermodynamic analyses and remains poorly understood. In this work, we elucidate, through imaging experiments on surfaces with structure length scales ranging from 100 nm to 10 μm and wetting physics, how local energy barriers are essential to understand non-equilibrium condensed droplet morphologies and demonstrate that overcoming these barriers via nucleation-mediated droplet-droplet interactions leads to the emergence of wetting states not predicted by scale-invariant global thermodynamic analysis. This mechanistic understanding offers insight into the role of surface-structure length scale, provides a quantitative basis for designing surfaces optimized for condensation in engineered systems, and promises insight into ice formation on surfaces that initiates with the condensation of subcooled water.

From fetus to adult--an allometric analysis of the giraffe vertebral column.

PubMed

van Sittert, Sybrand J; Skinner, John D; Mitchell, Graham

2010-09-15

As mammalian cervical vertebral count is almost always limited to seven, the vertebral column of the giraffe (Giraffa camelopardalis) provides an interesting study on scaling and adaptation to shape in light of these constraints. We have defined and described the growth rates of the lengths, widths, and heights of the vertebrae from fetal through neonatal life to maturity. We found that the disproportionate elongation of the cervical vertebrae is not a fetal process but occurs after birth, and that each cervical (C2-C7) vertebrae elongates at the same rate. C7 is able to specialize toward elongation as its function has been shifted to T1. We concluded that T1 is a transitional vertebra whose scaling exponent and length is between that of the cervical and thoracic series. Despite its transitional nature, T1 is still regarded as thoracic, as it possesses an articulating rib that attaches to the sternum. The other dimensions taken (width, height, and spinous process length) show that giraffe vertebral morphology exhibit adaptations to biomechanical strain, and we have underlined the importance of the thoracic spinous processes in supporting the head and neck. (c) 2010 Wiley-Liss, Inc.

Explaining the length threshold of polyglutamine aggregation

NASA Astrophysics Data System (ADS)

De Los Rios, Paolo; Hafner, Marc; Pastore, Annalisa

2012-06-01

The existence of a length threshold, of about 35 residues, above which polyglutamine repeats can give rise to aggregation and to pathologies, is one of the hallmarks of polyglutamine neurodegenerative diseases such as Huntington’s disease. The reason why such a minimal length exists at all has remained one of the main open issues in research on the molecular origins of such classes of diseases. Following the seminal proposals of Perutz, most research has focused on the hunt for a special structure, attainable only above the minimal length, able to trigger aggregation. Such a structure has remained elusive and there is growing evidence that it might not exist at all. Here we review some basic polymer and statistical physics facts and show that the existence of a threshold is compatible with the modulation that the repeat length imposes on the association and dissociation rates of polyglutamine polypeptides to and from oligomers. In particular, their dramatically different functional dependence on the length rationalizes the very presence of a threshold and hints at the cellular processes that might be at play, in vivo, to prevent aggregation and the consequent onset of the disease.

Distinct subsystems for the parafoveal processing of spatial and linguistic information during eye fixations in reading.

PubMed

Inhoff, Albrecht W; Radach, Ralph; Eiter, Brianna M; Juhasz, Barbara

2003-07-01

Two experiments examined readers' use of parafoveally obtained word length information for word recognition. Both experiments manipulated the length (number of constituent characters) of a parafoveally previewed target word so that it was either accurately or inaccurately specified. In Experiment 1, previews also either revealed or denied useful orthographic information. In Experiment 2, parafoveal targets were either high- or low-frequency words. Eye movement contingent display changes were used to show the intact target upon its fixation. Examination of target viewing duration showed completely additive effects of word length previews and of ortho-graphic previews in Experiment 1, viewing duration being shorter in the accurate-length and the orthographic preview conditions. Experiment 2 showed completely additive effects of word length and word frequency, target viewing being shorter in the accurate-length and the high-frequency conditions. Together these results indicate that functionally distinct subsystems control the use of parafoveally visible spatial and linguistic information in reading. Parafoveally visible spatial information appears to be used for two distinct extralinguistic computations: visual object selection and saccade specification.

Variety of neutron sensors based on scintillating glass waveguides

NASA Astrophysics Data System (ADS)

Bliss, Mary; Craig, Richard A.

1995-04-01

Pacific Northwest Laboratory (PNL) has fabricated cerium-activated lithium silicate glass scintillating fiber waveguide neutron sensors via a hot-downdraw process. These fibers typically have a transmission length (e-1 length) of greater than 2 meters. The underlying physics of, the properties of, and selected devices incorporating these fibers are described. These fibers constitute an enabling technology for a wide variety of neutron sensors.

Rough Mill Simulations Reveal That Productivity When Processing Short Lumber Can Be High

Treesearch

Janice K. Wiedenbeck; Philip A. Araman

1995-01-01

Handling rates and costs associated with using short-length lumber (less than 8 ft. long) in furniture and cabinet industry rough mills have been assumed to be prohibitive. Discrete-event systems simulation models of both a crosscut-first and gang-rip-first rough mill were built to measure the effect of lumber length on equipment utilization and the volume and value of...

The influence of the lysimeter filling on the soil monolith inside

NASA Astrophysics Data System (ADS)

Puetz, T.; Schilling, J.; Vereecken, H.

2009-04-01

In general, lysimeters are vessels containing disturbed or undisturbed soil blocks, for the most realistic scenario with regard to real outdoor conditions an undisturbed soil block so called soil monolith is preferable. The lower boundary condition was realized in two different ways: as a zero-tension lysimeter with a perforated bottom plate or as controlled lower boundary condition with a suction plate. The optimal surface area and the lysimeter length depend mainly on the scientific question. For cropped lysimeter experiments the lysimeter length has to reflect to a maximum root length. The base area is strongly connected to the scale of observation, whereby small-scale heterogeneity will be averaged using large base areas. For our experiments lysimeters with 2.5 m length, 2 m2 base area and with a wall thickness of the round vessel of 10 mm were used. A base frame weighted down by 120 t of concrete weights is necessary to press a lysimeter cylinder into the ground by the aid of a hydraulic press. The hydraulic press is connected with the base frame via chains. Because of the control of the four hydraulic cylinders a very precise vertical pressing process is guaranteed. To visualize the impact of the lysimeter filling on the intactness of the soil monolith a finite element computation was conducted. The finite element package ANSYS Release 11 was used to execute a nonlinear static analysis on a 2D-axisymmetric finite element model, to simulate the pressing process starting from a soil initial stress state and ending with the full length of the vessel driven into the soil, after which the hydraulic press and the concrete weights are deactivated and the vessel-surrounding soil is excavated. The numerical model of the pressing process considers among other things, a cap non-associative plasticity model with shear and volumetric hardening, soil to soil contact with cohesive zone modelling, soil to vessel contact with high friction, soil excavation using element birth and death and a stagger-loop over the complete pressing process to determine the actual cutting plane

Fracture process zone in granite

USGS Publications Warehouse

Zang, A.; Wagner, F.C.; Stanchits, S.; Janssen, C.; Dresen, G.

2000-01-01

In uniaxial compression tests performed on Aue granite cores (diameter 50 mm, length 100 mm), a steel loading plate was used to induce the formation of a discrete shear fracture. A zone of distributed microcracks surrounds the tip of the propagating fracture. This process zone is imaged by locating acoustic emission events using 12 piezoceramic sensors attached to the samples. Propagation velocity of the process zone is varied by using the rate of acoustic emissions to control the applied axial force. The resulting velocities range from 2 mm/s in displacement-controlled tests to 2 ??m/s in tests controlled by acoustic emission rate. Wave velocities and amplitudes are monitored during fault formation. P waves transmitted through the approaching process zone show a drop in amplitude of 26 dB, and ultrasonic velocities are reduced by 10%. The width of the process zone is ???9 times the grain diameter inferred from acoustic data but is only 2 times the grain size from optical crack inspection. The process zone of fast propagating fractures is wider than for slow ones. The density of microcracks and acoustic emissions increases approaching the main fracture. Shear displacement scales linearly with fracture length. Fault plane solutions from acoustic events show similar orientation of nodal planes on both sides of the shear fracture. The ratio of the process zone width to the fault length in Aue granite ranges from 0.01 to 0.1 inferred from crack data and acoustic emissions, respectively. The fracture surface energy is estimated from microstructure analysis to be ???2 J. A lower bound estimate for the energy dissipated by acoustic events is 0.1 J. Copyright 2000 by the American Geophysical Union.

Branch length estimation and divergence dating: estimates of error in Bayesian and maximum likelihood frameworks.

PubMed

Schwartz, Rachel S; Mueller, Rachel L

2010-01-11

Estimates of divergence dates between species improve our understanding of processes ranging from nucleotide substitution to speciation. Such estimates are frequently based on molecular genetic differences between species; therefore, they rely on accurate estimates of the number of such differences (i.e. substitutions per site, measured as branch length on phylogenies). We used simulations to determine the effects of dataset size, branch length heterogeneity, branch depth, and analytical framework on branch length estimation across a range of branch lengths. We then reanalyzed an empirical dataset for plethodontid salamanders to determine how inaccurate branch length estimation can affect estimates of divergence dates. The accuracy of branch length estimation varied with branch length, dataset size (both number of taxa and sites), branch length heterogeneity, branch depth, dataset complexity, and analytical framework. For simple phylogenies analyzed in a Bayesian framework, branches were increasingly underestimated as branch length increased; in a maximum likelihood framework, longer branch lengths were somewhat overestimated. Longer datasets improved estimates in both frameworks; however, when the number of taxa was increased, estimation accuracy for deeper branches was less than for tip branches. Increasing the complexity of the dataset produced more misestimated branches in a Bayesian framework; however, in an ML framework, more branches were estimated more accurately. Using ML branch length estimates to re-estimate plethodontid salamander divergence dates generally resulted in an increase in the estimated age of older nodes and a decrease in the estimated age of younger nodes. Branch lengths are misestimated in both statistical frameworks for simulations of simple datasets. However, for complex datasets, length estimates are quite accurate in ML (even for short datasets), whereas few branches are estimated accurately in a Bayesian framework. Our reanalysis of empirical data demonstrates the magnitude of effects of Bayesian branch length misestimation on divergence date estimates. Because the length of branches for empirical datasets can be estimated most reliably in an ML framework when branches are <1 substitution/site and datasets are > or =1 kb, we suggest that divergence date estimates using datasets, branch lengths, and/or analytical techniques that fall outside of these parameters should be interpreted with caution.

Morphological parameters for implantation of the screwless spring loop dynamic posterior spinous process stabilizing system.

PubMed

Song, Geun Soo; Lee, Yeon Soo

2015-07-01

This study aimed to quantify morphological characteristics of the posterior lumbar spinous process, which may affect stable implantation of screwless wire spring loops. Virtual implantations of a screwless wire spring loop onto pairs of lumbar spinous processes were performed for computed tomography (CT)-derived three-dimensional vertebral models of 40 Korean subjects. Morphological parameters of lumbar vertebrae 1 through 5 (L1-L5) were measured with regard to bone-implant interference. In males, the transspinous process fixation lengths decreased from 57.8±3.0mm to 48.8±3.2mm as the lumbar joints descend from L1-L2 to L4-L5, with those in females about 4.1±0.4mm shorter (p<0.05) than in males through all lumbar joints. The fixation angle on the sagittal plane varied from 105.0° to 101.3° relative to the transverse plane as the vertebrae descend. The clenched thickness in females was the least (6.7±1.2mm) for the L2 lower spinous process and the greatest (8.1±2.2mm) for the L4 upper spinous process; this was 1.0±10.3mm less than that for males at corresponding levels (p>0.05). The ratio of the spinous process clenched thickness to the transspinous fixation length increased from 0.133±0.016 to 0.196±0.076 for the upper spinous processes as the lumbar joints descend. The ratio of the spinous process clenched thickness to the transspinous fixation length varies, depending on gender and whether the clenched level is the upper or lower spinous process. These parameters related to the clenching fixation stability should be considered in development and implantations of the screwless wire spring loop. Copyright © 2015 Elsevier GmbH. All rights reserved.

Root growth during molar eruption in extant great apes.

PubMed

Kelley, Jay; Dean, Christopher; Ross, Sasha

2009-01-01

While there is gradually accumulating knowledge about molar crown formation and the timing of molar eruption in extant great apes, very little is known about root formation during the eruption process. We measured mandibular first and second molar root lengths in extant great ape osteological specimens that died while either the first or second molars were in the process of erupting. For most specimens, teeth were removed so that root lengths could be measured directly. When this was not possible, roots were measured radiographically. We were particularly interested in the variation in the lengths of first molar roots near the point of gingival emergence, so specimens were divided into early, middle and late phases of eruption based on the number of cusps that showed protein staining, with one or two cusps stained equated with immediate post-gingival emergence. For first molars at this stage, Gorilla has the longest roots, followed by Pongo and Pan. Variation in first molar mesial root lengths at this stage in Gorilla and Pan, which comprise the largest samples, is relatively low and represents no more than a few months of growth in both taxa. Knowledge of root length at first molar emergence permits an assessment of the contribution of root growth toward differences between great apes and humans in the age at first molar emergence. Root growth makes up a greater percentage of the time between birth and first molar emergence in humans than it does in any of the great apes. Copyright (c) 2009 S. Karger AG, Basel.

Horizontal Directional Drilling-Length Detection Technology While Drilling Based on Bi-Electro-Magnetic Sensing.

PubMed

Wang, Yudan; Wen, Guojun; Chen, Han

2017-04-27

The drilling length is an important parameter in the process of horizontal directional drilling (HDD) exploration and recovery, but there has been a lack of accurate, automatically obtained statistics regarding this parameter. Herein, a technique for real-time HDD length detection and a management system based on the electromagnetic detection method with a microprocessor and two magnetoresistive sensors employing the software LabVIEW are proposed. The basic principle is to detect the change in the magnetic-field strength near a current coil while the drill stem and drill-stem joint successively pass through the current coil forward or backward. The detection system consists of a hardware subsystem and a software subsystem. The hardware subsystem employs a single-chip microprocessor as the main controller. A current coil is installed in front of the clamping unit, and two magneto resistive sensors are installed on the sides of the coil symmetrically and perpendicular to the direction of movement of the drill pipe. Their responses are used to judge whether the drill-stem joint is passing through the clamping unit; then, the order of their responses is used to judge the movement direction. The software subsystem is composed of a visual software running on the host computer and a software running in the slave microprocessor. The host-computer software processes, displays, and saves the drilling-length data, whereas the slave microprocessor software operates the hardware system. A combined test demonstrated the feasibility of the entire drilling-length detection system.

Horizontal Directional Drilling-Length Detection Technology While Drilling Based on Bi-Electro-Magnetic Sensing

PubMed Central

Wang, Yudan; Wen, Guojun; Chen, Han

2017-01-01

The drilling length is an important parameter in the process of horizontal directional drilling (HDD) exploration and recovery, but there has been a lack of accurate, automatically obtained statistics regarding this parameter. Herein, a technique for real-time HDD length detection and a management system based on the electromagnetic detection method with a microprocessor and two magnetoresistive sensors employing the software LabVIEW are proposed. The basic principle is to detect the change in the magnetic-field strength near a current coil while the drill stem and drill-stem joint successively pass through the current coil forward or backward. The detection system consists of a hardware subsystem and a software subsystem. The hardware subsystem employs a single-chip microprocessor as the main controller. A current coil is installed in front of the clamping unit, and two magneto resistive sensors are installed on the sides of the coil symmetrically and perpendicular to the direction of movement of the drill pipe. Their responses are used to judge whether the drill-stem joint is passing through the clamping unit; then, the order of their responses is used to judge the movement direction. The software subsystem is composed of a visual software running on the host computer and a software running in the slave microprocessor. The host-computer software processes, displays, and saves the drilling-length data, whereas the slave microprocessor software operates the hardware system. A combined test demonstrated the feasibility of the entire drilling-length detection system. PMID:28448445

Non-local damage rheology and size effect

NASA Astrophysics Data System (ADS)

Lyakhovsky, V.

2011-12-01

We study scaling relations controlling the onset of transiently-accelerating fracturing and transition to dynamic rupture propagation in a non-local damage rheology model. The size effect is caused principally by growth of a fracture process zone, involving stress redistribution and energy release associated with a large fracture. This implies that rupture nucleation and transition to dynamic propagation are inherently scale-dependent processes. Linear elastic fracture mechanics (LEFM) and local damage mechanics are formulated in terms of dimensionless strain components and thus do not allow introducing any space scaling, except linear relations between fracture length and displacements. Generalization of Weibull theory provides scaling relations between stress and crack length at the onset of failure. A powerful extension of the LEFM formulation is the displacement-weakening model which postulates that yielding is complete when the crack wall displacement exceeds some critical value or slip-weakening distance Dc at which a transition to kinetic friction is complete. Scaling relations controlling the transition to dynamic rupture propagation in slip-weakening formulation are widely accepted in earthquake physics. Strong micro-crack interaction in a process zone may be accounted for by adopting either integral or gradient type non-local damage models. We formulate a gradient-type model with free energy depending on the scalar damage parameter and its spatial derivative. The damage-gradient term leads to structural stresses in the constitutive stress-strain relations and a damage diffusion term in the kinetic equation for damage evolution. The damage diffusion eliminates the singular localization predicted by local models. The finite width of the localization zone provides a fundamental length scale that allows numerical simulations with the model to achieve the continuum limit. A diffusive term in the damage evolution gives rise to additional damage diffusive time scale associated with the structural length scale. The ratio between two time scales associated with damage accumulation and diffusion, the damage diffusivity ratio, reflects the role of the diffusion-controlled delocalization. We demonstrate that localized fracturing occurs at the damage diffusivity ratio below certain critical value leading to a linear scaling between stress and crack length compatible with size effect for failures at crack initiation. A subseuqent quasi-static fracture growth is self-similar with increasing size of the process zone proportional to the fracture length. At a certain stage, controlled by dynamic weakening, the self-similarity breaks down and crack velocity significantly deviates from that predicted by the quasi-static regime, the size of the process zone decreases, and the rate of crack growth ceases to be controlled by the rate of damage increase. Furthermore, the crack speed approaches that predicted by the elasto-dynamic equation. The non-local damage rheology model predicts that the nucleation size of the dynamic fracture scales with fault zone thickness distance of the stress interraction.

Word processing during reading sentences in patients with schizophrenia: evidences from the eyetracking technique.

PubMed

Fernández, Gerardo; Sapognikoff, Marcelo; Guinjoan, Salvador; Orozco, David; Agamennoni, Osvaldo

2016-07-01

The current study analyze the effect of word properties (i.e., word length, word frequency and word predictability) on the eye movement behavior of patients with schizophrenia (SZ) compared to age-matched controls. 18 SZ patients and 40 age matched controls participated in the study. Eye movements were recorded during reading regular sentences by using the eyetracking technique. Eye movement analyses were performed using linear mixed models. Analysis of eye movements revealed that patients with SZ decreased the amount of single fixations, increased their total number of second pass fixations compared with healthy individuals (Controls). In addition, SZ patients showed an increase in gaze duration, compared to Controls. Interestingly, the effects of current word frequency and current word length processing were similar in Controls and SZ patients. The high rate of second pass fixations and its low rate in single fixation might reveal impairments in working memory when integrating neighbor words. In contrast, word frequency and length processing might require less complex mechanisms, which were functioning in SZ patients. To the best of our knowledge, this is the first study measuring how patients with SZ process dynamically well-defined words embedded in regular sentences. The findings suggest that evaluation of the resulting changes in eye movement behavior may supplement current symptom-based diagnosis. Copyright © 2016 Elsevier Inc. All rights reserved.

Chain-Length-Dependent Exciton Dynamics in Linear Oligothiophenes Probed Using Ensemble and Single-Molecule Spectroscopy.

PubMed

Kim, Tae-Woo; Kim, Woojae; Park, Kyu Hyung; Kim, Pyosang; Cho, Jae-Won; Shimizu, Hideyuki; Iyoda, Masahiko; Kim, Dongho

2016-02-04

Exciton dynamics in π-conjugated molecular systems is highly susceptible to conformational disorder. Using time-resolved and single-molecule spectroscopic techniques, the effect of chain length on the exciton dynamics in a series of linear oligothiophenes, for which the conformational disorder increased with increasing chain length, was investigated. As a result, extraordinary features of the exciton dynamics in longer-chain oligothiophene were revealed. Ultrafast fluorescence depolarization processes were observed due to exciton self-trapping in longer and bent chains. Increase in exciton delocalization during dynamic planarization processes was also observed in the linear oligothiophenes via time-resolved fluorescence spectra but was restricted in L-10T because of its considerable conformational disorder. Exciton delocalization was also unexpectedly observed in a bent chain using single-molecule fluorescence spectroscopy. Such delocalization modulates the fluorescence spectral shape by attenuating the 0-0 peak intensity. Collectively, these results provide significant insights into the exciton dynamics in conjugated polymers.

Impedance de surface dans les supraconducteurs quasi-bidimensionnels

NASA Astrophysics Data System (ADS)

Achkir, Driss Brice

Ce travail a caractere experimental et theorique vise l'etude de l'etat supraconducteur de trois familles de composes: les supraconducteurs conventionnels, les organiques et les cuprates YBCO. Pour ce faire, nous avons utilise une technique hyperfrequence, a savoir la mesure d'impedance de surface en fonction de la temperature et du champ magnetique. Dans les supraconducteurs conventionnels, nous avons mesure pour la premiere fois le pic de "coherence" dans la partie reelle de la conductivite. Bien que predit par la theorie BCS, ce pic n'avait pas ete clairement observe en raison de difficultes techniques liees a ce type d'experience. D'autre part, la theorie d'Eliashberg appliquee a la partie reelle de la conductivite du niobium nous a revele l'importance des mesures hyperfrequences pour mieux extraire la partie basse frequence de la densite spectrale alphasp2F(omega). Cette possibilite est attrayante puisque c'est precisement la region de frequences de alphasp2F(omega) ou les donnees d'effet tunnel sont imprecises. Les resultats obtenus sur la longueur de penetration dans les organiques et les cuprates ont permis de montrer que le gap presente des lignes de zeros au niveau de Fermi ou qu'il est, a tout le moins, fortement anisotrope. En effet, la dependance en temperature de la longueur de penetration dans les cristaux purs est lineaire a basse temperature et elle devient quadratique dans les cristaux dopes. Pour le cas des supraconducteurs organiques quasi-bidimensionnels (Et)sb2X, nous avons aussi observe un maximum sur la partie reelle de la conductivite qui n'a rien a voir avec un pic de coherence. Pour ces composes, nous avons effectue une des toutes premieres etudes des fluctuations supraconductrices en temperature et en champ magnetique. Nous montrons que la paraconductivite sigmasp' due aux fluctuations presente un comportement de type Aslamazov-Larkin de nature tridimensionnelle. Ces mesures sont appuyees par les resultats theoriques d'un modele Ginzburg-Landau dynamique que nous avons developpe. De plus, a partir de l'analyse des fluctuations, nous avons pu identifier le champ critique pour la transition resistive en champ et ainsi en deduire la transition de fonte du reseau de vortex dans le (Et)sb2Cu(SCN)sb2.

Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

NASA Astrophysics Data System (ADS)

Mejdi, Abderrazak

Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en compte. Les modeles developpes ont permis de conduire plusieurs etudes parametriques sur les proprietes vibro-acoustiques des structures d'avions facilitant ainsi la tache des concepteurs. Dans le cadre de cette these, un article a ete publie dans le Journal of Sound and Vibration et trois autres soumis, respectivement aux Journal of Acoustical Society of America, International Journal of Solid Mechanics et au Journal of Sound and Vibration Mots cles : structures raidies, composites, vibro-acoustique, perte par transmission.

Analyse des interactions energetiques entre un arena et son systeme de refrigeration

NASA Astrophysics Data System (ADS)

Seghouani, Lotfi

La presente these s'inscrit dans le cadre d'un projet strategique sur les arenas finance par le CRSNG (Conseil de Recherche en Sciences Naturelles et en Genie du Canada) qui a pour but principal le developpement d'un outil numerique capable d'estimer et d'optimiser la consommation d'energie dans les arenas et curlings. Notre travail s'inscrit comme une suite a un travail deja realise par DAOUD et coll. (2006, 2007) qui a developpe un modele 3D (AIM) en regime transitoire de l'arena Camilien Houde a Montreal et qui calcule les flux de chaleur a travers l'enveloppe du batiment ainsi que les distributions de temperatures et d'humidite durant une annee meteorologique typique. En particulier, il calcule les flux de chaleur a travers la couche de glace dus a la convection, la radiation et la condensation. Dans un premier temps nous avons developpe un modele de la structure sous la glace (BIM) qui tient compte de sa geometrie 3D, des differentes couches, de l'effet transitoire, des gains de chaleur du sol en dessous et autour de l'arena etudie ainsi que de la temperature d'entree de la saumure dans la dalle de beton. Par la suite le BIM a ete couple le AIM. Dans la deuxieme etape, nous avons developpe un modele du systeme de refrigeration (REFSYS) en regime quasi-permanent pour l'arena etudie sur la base d'une combinaison de relations thermodynamiques, de correlations de transfert de chaleur et de relations elaborees a partir de donnees disponibles dans le catalogue du manufacturier. Enfin le couplage final entre l'AIM +BIM et le REFSYS a ete effectue sous l'interface du logiciel TRNSYS. Plusieurs etudes parametriques on ete entreprises pour evaluer les effets du climat, de la temperature de la saumure, de l'epaisseur de la glace, etc. sur la consommation energetique de l'arena. Aussi, quelques strategies pour diminuer cette consommation ont ete etudiees. Le considerable potentiel de recuperation de chaleur au niveau des condenseurs qui peut reduire l'energie requise par le systeme de ventilation de l'arena a ete mis en evidence. Mots cles. Arena, Systeme de refrigeration, Consommation d'energie, Efficacite energetique, Conduction au sol, Performance annuelle.

Device and method for shortening reactor process tubes

DOEpatents

Frantz, C.E.; Alexander, W.K.; Lander, W.E.B.

A device and method are described for in situ shortening of nuclear reactor zirconium alloy process tubes which have grown as a result of radiation exposure. An upsetting technique is utilized which involves inductively heating a short band of a process tube with simultaneous application of an axial load sufficient to cause upsetting with an attendant decrease in length of the process tube.

Primary care visit length, quality, and satisfaction for standardized patients with depression.

PubMed

Geraghty, Estella M; Franks, Peter; Kravitz, Richard L

2007-12-01

The contribution of physician and organizational factors to visit length, quality, and satisfaction remains uncertain, in part, because of confounding by patient presentation. To determine associations among visit length, quality, and satisfaction when patient presentation is controlled. A factorial experiment using standardized patients to make primary care visits presenting with either major depression or adjustment disorder, and a musculoskeletal complaint. One hundred fifty-two primary care physicians, each seeing 2 standardized patients. Visit length was determined from surreptitiously obtained audiorecordings. Other key measures were derived from physician and standardized patient report. Mean visit length for 294 completed encounters was 22.3 minutes (range = 5.8-72.2, SD = 9.4). Key factors associated with visit length were: physician style (rho = 0.68 and 0.54 after multivariate adjustment), nonprofessional experience with depression (11% longer, 95% CI = 0-23%), practicing within an HMO (26% shorter, 95% CI = 61-90%), and greater practice volume (those working >9 half-day clinic sessions/week had 15% shorter visits than those working fewer than 6, 95% CI = 0-27%, and those seeing >12 patients/half-day had 27% shorter visits than those seeing <10 patients/half-day, 95% CI = 13-39%). Suicidal inquiry (a process-based quality-of-care measure for depression) was not associated with adjusted visit length. Satisfaction was linearly associated with visit length but not with suicide inquiry or follow-up interval. Despite experimental control for clinical presentation, wide variation in visit length persists, largely reflecting individual physician styles. Visit length is a significant determinant of standardized patient satisfaction.

Accounting for length-bias and selection effects in estimating the distribution of menstrual cycle length

PubMed Central

Lum, Kirsten J.; Sundaram, Rajeshwari; Louis, Thomas A.

2015-01-01

Prospective pregnancy studies are a valuable source of longitudinal data on menstrual cycle length. However, care is needed when making inferences of such renewal processes. For example, accounting for the sampling plan is necessary for unbiased estimation of the menstrual cycle length distribution for the study population. If couples can enroll when they learn of the study as opposed to waiting for the start of a new menstrual cycle, then due to length-bias, the enrollment cycle will be stochastically larger than the general run of cycles, a typical property of prevalent cohort studies. Furthermore, the probability of enrollment can depend on the length of time since a woman’s last menstrual period (a backward recurrence time), resulting in selection effects. We focus on accounting for length-bias and selection effects in the likelihood for enrollment menstrual cycle length, using a recursive two-stage approach wherein we first estimate the probability of enrollment as a function of the backward recurrence time and then use it in a likelihood with sampling weights that account for length-bias and selection effects. To broaden the applicability of our methods, we augment our model to incorporate a couple-specific random effect and time-independent covariate. A simulation study quantifies performance for two scenarios of enrollment probability when proper account is taken of sampling plan features. In addition, we estimate the probability of enrollment and the distribution of menstrual cycle length for the study population of the Longitudinal Investigation of Fertility and the Environment Study. PMID:25027273

Influence of solder joint length to the mechanical aspect during the thermal stress analysis

NASA Astrophysics Data System (ADS)

Tan, J. S.; Khor, C. Y.; Rahim, Wan Mohd Faizal Wan Abd; Ishak, Muhammad Ikman; Rosli, M. U.; Jamalludin, Mohd Riduan; Zakaria, M. S.; Nawi, M. A. M.; Aziz, M. S. Abdul; Ani, F. Che

2017-09-01

Solder joint is an important interconnector in surface mount technology (SMT) assembly process. The real time stress, strain and displacement of the solder joint is difficult to observe and assess the experiment. To tackle these problems, simulation analysis was employed to study the von Mises stress, strain and displacement in the thermal stress analysis by using Finite element based software. In this study, a model of leadless electronic package was considered. The thermal stress analysis was performed to investigate the effect of the solder length to those mechanical aspects. The simulation results revealed that solder length gives significant effect to the maximum von Mises stress to the solder joint. Besides, changes in solder length also influence the displacement of the solder joint in the thermal environment. The increment of the solder length significantly reduces the von Mises stress and strain on the solder joint. Thus, the understanding of the physical parameter for solder joint is important for engineer prior to designing the solder joint of the electronic component.

Critical Dipole Length for the Wetting Transition Due to Collective Water-dipoles Interactions

PubMed Central

Wang, Chunlei; Zhou, Bo; Tu, Yusong; Duan, Manyi; Xiu, Peng; Li, Jingye; Fang, Haiping

2012-01-01

The wetting behavior of water on the solid surfaces is fundamental to various physical, chemical and biological processes. Conventionally, the surface with charges or charge dipoles is hydrophilic, whereas the non-polar surface is hydrophobic though some exceptions were recently reported. Using molecular dynamics simulations, we show that there is a critical length of the charge dipoles on the solid surface. The solid surface still exhibited hydrophobic behavior when the dipole length was less than the critical value, indicating that the water molecules on the solid surface seemed not “feel” attractive interactions from the charge dipoles on the solid surface. Those unexpected observations result from the collective interactions between the water molecules and charge dipoles on the solid surface, where the steric exclusion effect between water molecules greatly reduces the water-dipole interactions. Remarkably, the steric exclusion effect is also important for surfaces with charge dipole lengths greater than this critical length. PMID:22496954

On the distribution of saliency.

PubMed

Berengolts, Alexander; Lindenbaum, Michael

2006-12-01

Detecting salient structures is a basic task in perceptual organization. Saliency algorithms typically mark edge-points with some saliency measure, which grows with the length and smoothness of the curve on which these edge-points lie. Here, we propose a modified saliency estimation mechanism that is based on probabilistically specified grouping cues and on curve length distributions. In this framework, the Shashua and Ullman saliency mechanism may be interpreted as a process for detecting the curve with maximal expected length. Generalized types of saliency naturally follow. We propose several specific generalizations (e.g., gray-level-based saliency) and rigorously derive the limitations on generalized saliency types. We then carry out a probabilistic analysis of expected length saliencies. Using ergodicity and asymptotic analysis, we derive the saliency distributions associated with the main curves and with the rest of the image. We then extend this analysis to finite-length curves. Using the derived distributions, we derive the optimal threshold on the saliency for discriminating between figure and background and bound the saliency-based figure-from-ground performance.

The Long and the Short of it: On the Nature and Origin of Functional Overlap Between Representations of Space and Time

PubMed Central

Srinivasan, Mahesh; Carey, Susan

2010-01-01

When we describe time, we often use the language of space (The movie was long; The deadline is approaching). Experiments 1–3 asked whether—as patterns in language suggest—a structural similarity between representations of spatial length and temporal duration is easier to access than one between length and other dimensions of experience, such as loudness. Adult participants were shown pairings of lines of different length with tones of different duration (Experiment 1) or tones of different loudness (Experiment 2). The length of the lines and duration or loudness of the tones was either positively or negatively correlated. Participants were better able to bind particular lengths and durations when they were positively correlated than when they were not, a pattern not observed for pairings of lengths and tone amplitudes, even after controlling for the presence of visual cues to duration in Experiment 1 (Experiment 3). This suggests that representations of length and duration may functionally overlap to a greater extent than representations of length and loudness. Experiments 4 and 5 asked whether experience with and mastery of words like long and short—which can flexibly refer to both space and time—itself creates this privileged relationship. Nine-month-old infants, like adults, were better able to bind representations of particular lengths and durations when these were positively correlated (Experiment 4), and failed to show this pattern for pairings of lengths and tone amplitudes (Experiment 5). We conclude that the functional overlap between representations of length and duration does not result from a metaphoric construction processes mediated by learning to flexibly use words such as long and short. We suggest instead that it may reflect an evolutionary recycling of spatial representations for more general purposes. PMID:20537324

Conception et realisation d'un echantillonneur de grande vitesse en technologie HIGFET (transistor a effet de champ avec heterostructure et grille isolee)

NASA Astrophysics Data System (ADS)

Tazlauanu, Mihai

The research work reported in this thesis details a new fabrication technology for high speed integrated circuits in the broadest sense, including original contributions to device modeling, circuit simulation, integrated circuit design, wafer fabrication, micro-physical and electrical characterization, process flow and final device testing as part of an electrical system. The primary building block of this technology is the heterostructure insulated gate field effect transistor, HIGFET. We used an InP/InGaAs epitaxial heterostructure to ensure a high charge carrier mobility and hence obtain a higher operating frequency than that currently possible for silicon devices. We designed and built integrated circuits with two system architectures. The first architecture integrates the clock signal generator with the sample and hold circuitry on the InP die, while the second is a hybrid architecture of an InP sample and hold assembled with an external clock signal generator made with ECL circuits on GaAs. To generate the clock signals on the same die with the sample and hold circuits, we developed a digital circuit family based on an original inverter, appropriate for depletion mode NMOS technology. We used this circuit to design buffer amplifiers and ring oscillators. Four mask sets produced in a Cadence environment, have permitted the fabrication of test and working devices. Each new mask generation has reflected the previous achievements and has implemented new structures and circuit techniques. The fabrication technology has undergone successive modifications and refinements to optimize device manufacturing. Particular attention has been paid to the technological robustness. The plasma enhanced etching process (RIE) had been used for an exhaustive study for the statistical simulation of the technological steps. Electrical measurements, performed on the experimental samples, have permitted the modeling of the devices, technological processing to be adjusted and circuit design improved. Electrical measurements performed on dedicated test structures, during the fabrication cycle, allowed the identification and correction of some technological problems (ohmic contacts, current leakage, interconnection integrity, and thermal instabilities). Feedback corrections were validated by dedicated experiments with the experimental effort optimized by statistical techniques (factorial fractional design). (Abstract shortened by UMI.)

Measurement of Debye length in laser-produced plasma.

NASA Technical Reports Server (NTRS)

Ehler, W.

1973-01-01

The Debye length of an expanded plasma created by placing an evacuated chamber with an entrance slit in the path of a freely expanding laser produced plasma was measured, using the slab geometry. An independent measurement of electron density together with the observed value for the Debye length also provided a means for evaluating the plasma electron temperature. This temperature has applications in ascertaining plasma conductivity and magnetic field necessary for confinement of the laser produced plasma. Also, the temperature obtained would be useful in analyzing electron-ion recombination rates in the expanded plasma and the dynamics of the cooling process of the plasma expansion.

Effective defect diffusion lengths in Ar-ion bombarded 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayu Aji, L. B.; Wallace, J. B.; Shao, L.

Above room temperature, SiC exhibits pronounced processes of diffusion and interaction of radiation-generated point defects. Here, we use the recently developed pulsed ion beam method to measure effective defect diffusion lengths in 3C-SiC bombarded in the temperature range of 25–200 °C with 500 keV Ar ions. Results reveal a diffusion length of ~10 nm, which exhibits a weak temperature dependence, changing from 9 to 13 nm with increasing temperature. Lastly, these results have important implications for understanding and predicting radiation damage in SiC and for the development of radiation-resistant materials via interface-mediated defect reactions.

Recent development of a jet-diffuser ejector

NASA Technical Reports Server (NTRS)

Alperin, M.; Wu, J. J.

1980-01-01

The paper considers thrust augmenting ejectors in which the processes of mixing and diffusion are partly carried out downstream of the ejector solid surfaces. A jet sheet surrounding the periphery of a widely diverging diffuser prevents separation and forms a gaseous, curved surface to provide effective diffuser ratio and additional length for mixing of primary and induced flows. Three-dimensional potential flow methods achieved a large reduction in the length of the associated solid surface; primary nozzle design further reduced the volume required by the jet-diffuser ejectors, resulting in thrust augmentation in excess of two, and an overall length of about 2 1/2 times the throat width.

Effective defect diffusion lengths in Ar-ion bombarded 3C-SiC

DOE PAGES

Bayu Aji, L. B.; Wallace, J. B.; Shao, L.; ...

2016-04-14

Above room temperature, SiC exhibits pronounced processes of diffusion and interaction of radiation-generated point defects. Here, we use the recently developed pulsed ion beam method to measure effective defect diffusion lengths in 3C-SiC bombarded in the temperature range of 25–200 °C with 500 keV Ar ions. Results reveal a diffusion length of ~10 nm, which exhibits a weak temperature dependence, changing from 9 to 13 nm with increasing temperature. Lastly, these results have important implications for understanding and predicting radiation damage in SiC and for the development of radiation-resistant materials via interface-mediated defect reactions.

Correlation between morphometry of the suprascapular notch and anthropometric measurements of the scapula.

PubMed

Polguj, M; Jędrzejewski, K S; Podgórski, M; Topol, M

2011-05-01

The concept of the study was to find the correlation between the morphometry of the suprascapular notch and basic anthropometric measurements of the human scapula. The measurements of the human scapulae included: morphological length and width, maximal width and length projection of scapular spine, length of acromion, and maximal length of the coracoid process. The glenoid cavity was measured in two perpendicular directions to evaluate its width and length. The width-length scapular and glenoid cavity indexes were calculated for every bone. In addition to standard anthropometric measurements two other measurements were defined and evaluated for every suprascapular notch: maximal depth (MD) and superior transverse diameter (STD). The superior transverse suprascapular ligament was completely ossified in 7% of cases. Ten (11.6%) scapulae had a discrete notch. In the studied material, in 21 (24.4%) scapulae the MD was longer than the STD. Two (2.3%) scapulae had equal maximal depth and superior transverse diameter. In 47 (57.7%) scapulae the superior transverse diameter was longer than the maximal depth. There was no statistically significant difference between anthropometric measurements in the group with higher MD and the group with higher STD. The maximal depth of the suprascapular notch negatively correlated with the scapular width-length index. The maximal depth of the scapular notch correlated with the morphological length of the scapulae.

Reducing liver transplant length of stay: a Lean Six Sigma approach.

PubMed

Toledo, Alexander H; Carroll, Tracy; Arnold, Emily; Tulu, Zeynep; Caffey, Tom; Kearns, Lauren E; Gerber, David A

2013-12-01

Organ transplant centers are under increasing scrutiny to maintain outcomes while controlling cost in a challenging population of patients. Throughout health care and transplant specifically, length of stay is used as a benchmark for both quality and resource utilization. To decrease our length of stay for liver transplant by using Lean Six Sigma methods. The Six Sigma DMAIC (Define, Measure, Analyze, Improve, Control) method was used to systematically analyze our process from transplant listing to hospital discharge after transplant, identifying many factors affecting length of stay. Adult, single-organ, primary liver transplant recipients between July 2008 and June 2012 were included in the study. Recipients with living donors or fulminant liver failure were excluded. Multiple interventions, including a clinical pathway and enhanced communication, were implemented. Length of stay after liver transplant and readmission after liver transplant.R ESULTS: Median length of stay decreased significantly from 11 days before the intervention to 8 days after the intervention. Readmission rate did not change throughout the study. The improved length of stay was maintained for 24 months after the study. Using a Lean Six Sigma approach, we were able to significantly decrease the length of stay of liver transplant patients. These results brought our center's outcomes in accordance with our goal and industry benchmark of 8 days. Clear expectations, improved teamwork, and a multidisciplinary clinical pathway were key elements in achieving and maintaining these gains.

Peripheral telomere length and hippocampal volume in adolescents with major depressive disorder.

PubMed

Henje Blom, E; Han, L K M; Connolly, C G; Ho, T C; Lin, J; LeWinn, K Z; Simmons, A N; Sacchet, M D; Mobayed, N; Luna, M E; Paulus, M; Epel, E S; Blackburn, E H; Wolkowitz, O M; Yang, T T

2015-11-10

Several studies have reported that adults with major depressive disorder have shorter telomere length and reduced hippocampal volumes. Moreover, studies of adult populations without major depressive disorder suggest a relationship between peripheral telomere length and hippocampal volume. However, the relationship of these findings in adolescents with major depressive disorder has yet to be explored. We examined whether adolescent major depressive disorder is associated with altered peripheral telomere length and hippocampal volume, and whether these measures relate to one another. In 54 unmedicated adolescents (13-18 years) with major depressive disorder and 63 well-matched healthy controls, telomere length was assessed from saliva using quantitative polymerase chain reaction methods, and bilateral hippocampal volumes were measured with magnetic resonance imaging. After adjusting for age and sex (and total brain volume in the hippocampal analysis), adolescents with major depressive disorder exhibited significantly shorter telomere length and significantly smaller right, but not left hippocampal volume. When corrected for age, sex, diagnostic group and total brain volume, telomere length was not significantly associated with left or right hippocampal volume, suggesting that these cellular and neural processes may be mechanistically distinct during adolescence. Our findings suggest that shortening of telomere length and reduction of hippocampal volume are already present in early-onset major depressive disorder and thus unlikely to be only a result of accumulated years of exposure to major depressive disorder.

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

Caracterisation experimentale de la transmission acoustique de structures aeronautiques

NASA Astrophysics Data System (ADS)

Pointel, Vincent

Le confort des passagers à l'intérieur des avions pendant le vol est un axe en voie d'amélioration constante. L'augmentation de la proportion des matériaux composites dans la fabrication des structures aéronautiques amène de nouvelles problématiques à résoudre. Le faible amortissement de ces structures, en contre partie de leur poids/raideur faible, est non favorable sur le plan acoustique, ce qui oblige les concepteurs à devoir trouver des moyens d'amélioration. De plus, les mécanismes de transmission du son au travers d'un système double paroi de type aéronautique ne sont pas complètement compris, c'est la raison qui motive cette étude. L'objectif principal de ce projet est de constituer une base de données pour le partenaire industriel de ce projet : Bombardier Aéronautique. En effet, les données expérimentales de performance d'isolation acoustique, de systèmes complets représentatifs d'un fuselage d'avion sont très rares dans la littérature scientifique. C'est pourquoi une méthodologie expérimentale est utilisée dans ce projet. Deux conceptions différentes de fuselage sont comparées. La première possède une peau (partie extérieure du fuselage) métallique raidie, alors que la deuxième est constituée d'un panneau sandwich composite. Dans les deux cas, un panneau de finition de fabrication sandwich est utilisé. Un traitement acoustique en laine de verre est placé à l'intérieur de chacun des fuselages. Des isolateurs vibratoires sont utilisés pour connecter les deux panneaux du fuselage. La simulation en laboratoire de la couche limite turbulente, qui est la source d'excitation prépondérante pendant la phase de vol, n'est pas encore possible hormis en soufflerie. C'est pourquoi deux cas d'excitation sont considérés pour essayer d'approcher cette sollicitation : une excitation mécanique (pot vibrant) et une acoustique (champ diffus). La validation et l'analyse des résultats sont effectuées par le biais des logiciels NOVA et VAONE, utilisés par le partenaire industriel de ce projet. Un des objectifs secondaires est de valider le modèle double paroi implémenté dans NOVA. L'investigation de l'effet de compression local du traitement acoustique, sur la perte par transmission d'une simple paroi, montre que cette action n'a aucun effet bénéfique notable. D'autre part, il apparaît que la raideur des isolateurs vibratoires a un lien direct avec les performances d'isolation du système double paroi. Le système double paroi avec peau composite semble moins sensible à ce paramètre. Le modèle double paroi de NOVA donne de bons résultats concernant le système double paroi avec une peau métallique. Des écarts plus importants sont observés en moyennes et hautes fréquences dans le cas du système avec une peau composite. Cependant, la bonne tendance de la prédiction au vu de la complexité de la structure est plutôt prometteuse. Mots-clés : Expérimental, avion, double paroi, panneaux composites, perte par transmission, transmission aérienne, transmission solidienne, isolateur vibratoire.

L'etude de l'InP et du GaP suite a l'implantation ionique de Mn et a un recuit thermique

NASA Astrophysics Data System (ADS)

Bucsa, Ioan Gigel

Cette these est dediee a l'etude des materiaux InMnP et GaMnP fabriques par implantation ionique et recuit thermique. Plus precisement nous avons investigue la possibilite de former par implantation ionique des materiaux homogenes (alliages) de InMnP et GaMnP contenant de 1 a 5 % atomiques de Mn qui seraient en etat ferromagnetique, pour des possibles applications dans la spintronique. Dans un premier chapitre introductif nous donnons les motivations de cette recherche et faisons une revue de la litterature sur ce sujet. Le deuxieme chapitre decrit les principes de l'implantation ionique, qui est la technique utilisee pour la fabrication des echantillons. Les effets de l'energie, fluence et direction du faisceau ionique sur le profil d'implantation et la formation des dommages seront mis en evidence. Aussi dans ce chapitre nous allons trouver des informations sur les substrats utilises pour l'implantation. Les techniques experimentales utilisees pour la caracterisation structurale, chimique et magnetique des echantillons, ainsi que leurs limitations sont presentees dans le troisieme chapitre. Quelques principes theoriques du magnetisme necessaires pour la comprehension des mesures magnetiques se retrouvent dans le chapitre 4. Le cinquieme chapitre est dedie a l'etude de la morphologie et des proprietes magnetiques des substrats utilises pour implantation et le sixieme chapitre, a l'etude des echantillons implantes au Mn sans avoir subi un recuit thermique. Notamment nous allons voir dans ce chapitre que l'implantation de Mn a plus que 1016 ions/cm 2 amorphise la partie implantee du materiau et le Mn implante se dispose en profondeur sur un profil gaussien. De point de vue magnetique les atomes implantes se trouvent dans un etat paramagnetique entre 5 et 300 K ayant le spin 5/2. Dans le chapitre 7 nous presentons les proprietes des echantillons recuits a basses temperatures. Nous allons voir que dans ces echantillons la couche implantee est polycristalline et les atomes de Mn sont toujours dans un etat paramagnetique. Dans les chapitres 8 et 9, qui sont les plus volumineux, nous presentons les resultats des mesures sur les echantillons recuits a hautes temperatures: il s'agit d'InP et du GaP implantes au Mn, dans le chapitre 8 et d'InP co-implante au Mn et au P, dans le chapitre 9. D'abord, dans le chapitre 8 nous allons voir que le recuit a hautes temperatures mene a une recristallisation epitaxiale du InMnP et du GaMnP; aussi la majorite des atomes de Mn se deplacent vers la surface a cause d'un effet de segregation. Dans les regions de la surface, concentres en Mn, les mesures XRD et TEM identifient la formation de MnP et d'In cristallin. Les mesures magnetiques identifient aussi la presence de MnP ferromagnetique. De plus dans ces mesures on trouve qu'environ 60 % du Mn implante est en etat paramagnetique avec la valeur du spin reduite par rapport a celle trouvee dans les echantillons non-recuits. Dans les echantillons InP co-implantes au Mn et au P la recristallisation est seulement partielle mais l'effet de segregation du Mn a la surface est beaucoup reduit. Dans ce cas plus que 50 % du Mn forme des particules MnP et le restant est en etat paramagnetique au spin 5/2, dilue dans la matrice de l'InP. Finalement dans le dernier chapitre, 10, nous presentons les conclusions principales auxquels nous sommes arrives et discutons les resultats et leurs implications. Mots cles: implantation ionique, InP, GaP, amorphisation, MnP, segregation, co-implantation, couche polycristalline, paramagnetisme, ferromagnetisme.

L'effet Peltier appliqué à la conception et la réalisation d'un nouveau capteur de débit massique

NASA Astrophysics Data System (ADS)

Wattiau, F.; Gaviot, E.; Thery, P.

1993-08-01

The present paper deals with design and realization of a new mass flow sensor using the Peltier effect. The sensor, shaped as a bimetallic printed circuit includes three continuous parallel strips coated with a great deal of metal plated spots. In such a device, the central track performs as a classical thermoelectrical circuitry whose both plated and uncoated parts provide the thermopile junctions. The two outer strips are subjected to electrical currents so as to generate numerous small thermal gradients owing to the Peltier effect. Then, the resulting differences in temperature induce a Seebeck e.m.f. on to the close inner strip acting as a receiver. The thermal coupling between transmitters and receiver tracks depends on any variation of the surrounding environment heat transfert coefficient. Therefore, such a device allows us to detect any shift in physical properties related to the apparent thermal conductivity. In the special case of a steady state fluid, the induced e.m.f. in the receiving track hinges on the thermal conductivity. When the fluid is in relative motion along the sensor, the velocity can be read out as a function of voltage. As an application, the thermoelectric circuit is placed in a tube conducting a fluid flow, in order to design a new mass flowmeter. Experimental results show that when subjected to a steady mass flow rate the e.m.f. remains still, even though the pressure is allowed to vary through the pipe. Actually, the supplied information depends only on the mass flow rate. The main advantage of this measurement method, when compared with classical hot wire devices, is that any change in the surrounding environment average temperature does not induce any significant shift on the output voltage. On the other hand, when operated in a wide temperature range, easy compensating techniques can be used to provide accurate and reliable performance over large temperature variations. Le travail présenté est relatif à la conception et la réalisation d'un nouveau capteur de débit massique basé sur l'effet Peltier. Le capteur en forme de circuit imprimé bimétallique, comporte plusieurs pistes métalliques continues parallèles entre elles et partiellement recouvertes par un grand nombre de dépôts électrolytiques de nature différente. Un tel circuit se comporte comme un circuit thermoélectrique classique dans lequel les parties homogènes non recouvertes par le dépôt électrolytique constituent le premier conducteur du couple, les parties plaquées constituant le second conducteur. La méthode de mesure consiste à faire passer un courant électrique dans une ou plusieurs pistes constituant le circuit émetteur de façon à générer par effet Peltier des gradients thermiques qui seront détectés par un circuit détecteur identique placé à proximité. Dans le cas particulier d'un fluide au repos, la f.e.m. détectée par le circuit détecteur dépend de la conductivité thermique du fluide. Lorsque le fluide est en mouvement relatif par rapport au circuit, il est possible de détecter une f.e.m. dépendant en grandeur et en signe de la vitesse d'écoulement du fluide. A titre d'application un capteur de débit massique a été réalisé en plaçant les circuits thermoélectriques dans une canalisation parcourue par le fluide en mouvement.

A high-throughput platform for population reformatting and mammalian expression of phage display libraries to enable functional screening as full-length IgG.

PubMed

Xiao, Xiaodong; Douthwaite, Julie A; Chen, Yan; Kemp, Ben; Kidd, Sara; Percival-Alwyn, Jennifer; Smith, Alison; Goode, Kate; Swerdlow, Bonnie; Lowe, David; Wu, Herren; Dall'Acqua, William F; Chowdhury, Partha S

Phage display antibody libraries are a rich resource for discovery of potential therapeutic antibodies. Single-chain variable fragment (scFv) libraries are the most common format due to the efficient display of scFv by phage particles and the ease by which soluble scFv antibodies can be expressed for high-throughput screening. Typically, a cascade of screening and triaging activities are performed, beginning with the assessment of large numbers of E. coli-expressed scFv, and progressing through additional assays with individual reformatting of the most promising scFv to full-length IgG. However, use of high-throughput screening of scFv for the discovery of full-length IgG is not ideal because of the differences between these molecules. Furthermore, the reformatting step represents a bottle neck in the process because each antibody has to be handled individually to preserve the unique VH and VL pairing. These problems could be resolved if populations of scFv could be reformatted to full-length IgG before screening without disrupting the variable region pairing. Here, we describe a novel strategy that allows the reformatting of diverse populations of scFv from phage selections to full-length IgG in a batch format. The reformatting process maintains the diversity and variable region pairing with high fidelity, and the resulted IgG pool enables high-throughput expression of IgG in mammalian cells and cell-based functional screening. The improved process led to the discovery of potent candidates that are comparable or better than those obtained by traditional methods. This strategy should also be readily applicable to Fab-based phage libraries. Our approach, Screening in Product Format (SiPF), represents a substantial improvement in the field of antibody discovery using phage display.

Local mechanical properties of LFT injection molded parts: Numerical simulations versus experiments

NASA Astrophysics Data System (ADS)

Desplentere, F.; Soete, K.; Bonte, H.; Debrabandere, E.

2014-05-01

In predictive engineering for polymer processes, the proper prediction of material microstructure from known processing conditions and constituent material properties is a critical step forward properly predicting bulk properties in the finished composite. Operating within the context of long-fiber thermoplastics (LFT, length < 15mm) this investigation concentrates on the prediction of the local mechanical properties of an injection molded part. To realize this, the Autodesk Simulation Moldflow Insight 2014 software has been used. In this software, a fiber breakage algorithm for the polymer flow inside the mold is available. Using well known micro mechanic formulas allow to combine the local fiber length with the local orientation into local mechanical properties. Different experiments were performed using a commercially available glass fiber filled compound to compare the measured data with the numerical simulation results. In this investigation, tensile tests and 3 point bending tests are considered. To characterize the fiber length distribution of the polymer melt entering the mold (necessary for the numerical simulations), air shots were performed. For those air shots, similar homogenization conditions were used as during the injection molding tests. The fiber length distribution is characterized using automated optical method on samples for which the matrix material is burned away. Using the appropriate settings for the different experiments, good predictions of the local mechanical properties are obtained.

Time-bin entangled photon pairs from spontaneous parametric down-conversion pumped by a cw multi-mode diode laser.

PubMed

Kwon, Osung; Park, Kwang-Kyoon; Ra, Young-Sik; Kim, Yong-Su; Kim, Yoon-Ho

2013-10-21

Generation of time-bin entangled photon pairs requires the use of the Franson interferometer which consists of two spatially separated unbalanced Mach-Zehnder interferometers through which the signal and idler photons from spontaneous parametric down-conversion (SPDC) are made to transmit individually. There have been two SPDC pumping regimes where the scheme works: the narrowband regime and the double-pulse regime. In the narrowband regime, the SPDC process is pumped by a narrowband cw laser with the coherence length much longer than the path length difference of the Franson interferometer. In the double-pulse regime, the longitudinal separation between the pulse pair is made equal to the path length difference of the Franson interferometer. In this paper, we propose another regime by which the generation of time-bin entanglement is possible and demonstrate the scheme experimentally. In our scheme, differently from the previous approaches, the SPDC process is pumped by a cw multi-mode (i.e., short coherence length) laser and makes use of the coherence revival property of such a laser. The high-visibility two-photon Franson interference demonstrates clearly that high-quality time-bin entanglement source can be developed using inexpensive cw multi-mode diode lasers for various quantum communication applications.

Performance characteristics of a batch service queueing system with functioning server failure and multiple vacations

NASA Astrophysics Data System (ADS)

Niranjan, S. P.; Chandrasekaran, V. M.; Indhira, K.

2018-04-01

This paper examines bulk arrival and batch service queueing system with functioning server failure and multiple vacations. Customers are arriving into the system in bulk according to Poisson process with rate λ. Arriving customers are served in batches with minimum of ‘a’ and maximum of ‘b’ number of customers according to general bulk service rule. In the service completion epoch if the queue length is less than ‘a’ then the server leaves for vacation (secondary job) of random length. After a vacation completion, if the queue length is still less than ‘a’ then the server leaves for another vacation. The server keeps on going vacation until the queue length reaches the value ‘a’. The server is not stable at all the times. Sometimes it may fails during functioning of customers. Though the server fails service process will not be interrupted.It will be continued for the current batch of customers with lower service rate than the regular service rate. The server will be repaired after the service completion with lower service rate. The probability generating function of the queue size at an arbitrary time epoch will be obtained for the modelled queueing system by using supplementary variable technique. Moreover various performance characteristics will also be derived with suitable numerical illustrations.

Length separation of single-walled carbon nanotubes and its impact on structural and electrical properties of wafer-level fabricated carbon nanotube-field-effect transistors

NASA Astrophysics Data System (ADS)

Böttger, Simon; Hermann, Sascha; Schulz, Stefan E.; Gessner, Thomas

2016-10-01

For an industrial realization of devices based on single-walled carbon nanotube (SWCNTs) such as field-effect transistors (FETs) it becomes increasingly important to consider technological aspects such as intrinsic device structure, integration process controllability as well as yield. From the perspective of a wafer-level integration technology, the influence of SWCNT length on the performance of short-channel CNT-FETs is demonstrated by means of a statistical and comparative study. Therefore, a methodological development of a length separation process based on size-exclusion chromatography was conducted in order to extract well-separated SWCNT dispersions with narrowed length distribution. It could be shown that short SWCNTs adversely affect integrability and reproducibility, underlined by a 25% decline of the integration yield with respect to long SWCNTs. Furthermore, it turns out that the significant changes in electrical performance are directly linked to a SWCNT chain formation in the transistor channel. In particular, CNT-FETs with long SWCNTs outperform reference and short SWCNTs with respect to hole mobility and subthreshold controllability by up to 300% and up to 140%, respectively. As a whole, this study provides a statistical and comparative analysis towards chain-less CNT-FETs fabricated with a wafer-level technology.

Superacid-Surfactant Exchange: Enabling Nondestructive Dispersion of Full-Length Carbon Nanotubes in Water.

PubMed

Wang, Peng; Kim, Mijin; Peng, Zhiwei; Sun, Chuan-Fu; Mok, Jasper; Lieberman, Anna; Wang, YuHuang

2017-09-26

Attaining aqueous solutions of individual, long single-walled carbon nanotubes is a critical first step for harnessing the extraordinary properties of these materials. However, the widely used ultrasonication-ultracentrifugation approach and its variants inadvertently cut the nanotubes into short pieces. The process is also time-consuming and difficult to scale. Here we present an unexpectedly simple solution to this decade-old challenge by directly neutralizing a nanotube-chlorosulfonic acid solution in the presence of sodium deoxycholate. This straightforward superacid-surfactant exchange eliminates the need for both ultrasonication and ultracentrifugation altogether, allowing aqueous solutions of individual nanotubes to be prepared within minutes and preserving the full length of the nanotubes. We found that the average length of the processed nanotubes is more than 350% longer than sonicated controls, with a significant fraction approaching ∼9 μm, a length that is limited by only the raw material. The nondestructive nature is manifested by an extremely low density of defects, bright and homogeneous photoluminescence in the near-infrared, and ultrahigh electrical conductivity in transparent thin films (130 Ω/sq at 83% transmittance), which well exceeds that of indium tin oxide. Furthermore, we demonstrate that our method is fully compatible with established techniques for sorting nanotubes by their electronic structures and can also be readily applied to graphene. This surprisingly simple method thus enables nondestructive aqueous solution processing of high-quality carbon nanomaterials at large-scale and low-cost with the potential for a wide range of fundamental studies and applications, including, for example, transparent conductors, near-infrared imaging, and high-performance electronics.

Cloned cows with short telomeres deliver healthy offspring with normal-length telomeres.

PubMed

Miyashita, Norikazu; Kubo, Yasuaki; Yonai, Miharu; Kaneyama, Kanako; Saito, Norio; Sawai, Ken; Minamihashi, Akira; Suzuki, Toshiyuki; Kojima, Toshiyuki; Nagai, Takashi

2011-10-01

Dolly, the first mammal cloned from a somatic cell, had shorter telomeres than age-matched controls and died at an early age because of disease. To investigate longevity and lifetime performance in cloned animals, we produced cloned cows with short telomeres using oviductal epithelial cells as donor cells. At 5 years of age, despite the presence of short telomeres, all cloned cows delivered multiple healthy offspring following artificial insemination with conventionally processed spermatozoa from noncloned bulls, and their milk production was comparable to that of donor cows. Moreover, this study revealed that the offspring had normal-length telomeres in their leukocytes and major organs. Thus, cloned animals have normal functional germ lines, and therefore germ line function can completely restore telomere lengths in clone gametes by telomerase activity, resulting in healthy offspring with normal-length telomeres.

Evaluation of bending rigidity behaviour of ultrasonic seaming on woven fabrics

NASA Astrophysics Data System (ADS)

Şevkan Macit, Ayşe; Tiber, Bahar

2017-10-01

In recent years ultrasonic seaming that is shown as an alternative method to conventional seaming has been investigated by many researchers. In our study, bending behaviour of this alternative method is examined by changing various parameters such as fabric type, seam type, roller type and seaming velocity. For this purpose fifteen types of sewn fabrics were tested according to bending rigidity test standard before and after washing processes and results were evaluated through SPSS statistical analyze programme. Consequently, bending length values of the ultrasonically sewn fabrics are found to be higher than the bending length values of conventionally sewn fabrics and the effects of seam type on bending length are seen statistically significant. Also it is observed that bending length values are in relationship with the rest of the parameters excluding roller type.

SAW correlator spread spectrum receiver

DOEpatents

Brocato, Robert W

2014-04-01

A surface acoustic wave (SAW) correlator spread-spectrum (SS) receiver is disclosed which utilizes a first demodulation stage with a chip length n and a second demodulation stage with a chip length m to decode a transmitted SS signal having a code length l=n.times.m which can be very long (e.g. up to 2000 chips or more). The first demodulation stage utilizes a pair of SAW correlators which demodulate the SS signal to generate an appropriate code sequence at an intermediate frequency which can then be fed into the second demodulation stage which can be formed from another SAW correlator, or by a digital correlator. A compound SAW correlator comprising two input transducers and a single output transducer is also disclosed which can be used to form the SAW correlator SS receiver, or for use in processing long code length signals.

Turbulence and entrainment length scales in large wind farms.

PubMed

Andersen, Søren J; Sørensen, Jens N; Mikkelsen, Robert F

2017-04-13

A number of large wind farms are modelled using large eddy simulations to elucidate the entrainment process. A reference simulation without turbines and three farm simulations with different degrees of imposed atmospheric turbulence are presented. The entrainment process is assessed using proper orthogonal decomposition, which is employed to detect the largest and most energetic coherent turbulent structures. The dominant length scales responsible for the entrainment process are shown to grow further into the wind farm, but to be limited in extent by the streamwise turbine spacing, which could be taken into account when developing farm layouts. The self-organized motion or large coherent structures also yield high correlations between the power productions of consecutive turbines, which can be exploited through dynamic farm control.This article is part of the themed issue 'Wind energy in complex terrains'. © 2017 The Author(s).

Turbulence and entrainment length scales in large wind farms

PubMed Central

2017-01-01

A number of large wind farms are modelled using large eddy simulations to elucidate the entrainment process. A reference simulation without turbines and three farm simulations with different degrees of imposed atmospheric turbulence are presented. The entrainment process is assessed using proper orthogonal decomposition, which is employed to detect the largest and most energetic coherent turbulent structures. The dominant length scales responsible for the entrainment process are shown to grow further into the wind farm, but to be limited in extent by the streamwise turbine spacing, which could be taken into account when developing farm layouts. The self-organized motion or large coherent structures also yield high correlations between the power productions of consecutive turbines, which can be exploited through dynamic farm control. This article is part of the themed issue ‘Wind energy in complex terrains’. PMID:28265028

Laser-zone Growth in a Ribbon-to-ribbon (RTR) Process Silicon Sheet Growth Development for the Large Area Silicon Sheet Task of the Low Cost Solar Array Project

NASA Technical Reports Server (NTRS)

Baghdadi, A.; Gurtler, R. W.; Legge, R.; Sopori, B.; Rice, M. J.; Ellis, R. J.

1979-01-01

A technique for growing limited-length ribbons continually was demonstrated. This Rigid Edge technique can be used to recrystallize about 95% of the polyribbon feedstock. A major advantage of this method is that only a single, constant length silicon ribbon is handled throughout the entire process sequence; this may be accomplished using cassettes similar to those presently in use for processing Czochralski waters. Thus a transition from Cz to ribbon technology can be smoothly affected. The maximum size being considered, 3 inches x 24 inches, is half a square foot, and will generate 6 watts for 12% efficiency at 1 sun. Silicon dioxide has been demonstrated as an effective, practical diffusion barrier for use during the polyribbon formation.

Micro- and mesoscopic process interactions in protein coagulation

NASA Astrophysics Data System (ADS)

San Biagio, P. L.; Martorana, V.; Emanuele, A.; Vaiana, S. M.; Manno, M.; Bulone, D.; Palma-Vittorelli, M. B.; Palma, M. U.

2000-04-01

It has recently been recognized that pathological protein coagulation is responsible for lethal pathologies as diverse as amyloidosis, Alzheimer and TSE. Understanding the coagulation mechanisms is therefore stirring great interest. In previous studies we have shown that on profoundly different systems coagulation is the result of a strong interaction between two processes on different length scales (mesoscopic and microscopic). Here we report experiments on bovine serum albumin (BSA) showing that the overall mechanism is the result of at least 3 distinct and strongly intertwined processes, on both length scales: molecular conformational changes, solution demixing and intermolecular crosslinking. This mechanism involves the statistical mechanics of protein-solvent interaction, its relation to the protein's landscape of configurational free energy and to the solution's thermodynamic stability, and its relation to the topological problem of crosslink-percolation, responsible for coagulation.

Double dynamic scaling in human communication dynamics

NASA Astrophysics Data System (ADS)

Wang, Shengfeng; Feng, Xin; Wu, Ye; Xiao, Jinhua

2017-05-01

In the last decades, human behavior has been deeply understanding owing to the huge quantities data of human behavior available for study. The main finding in human dynamics shows that temporal processes consist of high-activity bursty intervals alternating with long low-activity periods. A model, assuming the initiator of bursty follow a Poisson process, is widely used in the modeling of human behavior. Here, we provide further evidence for the hypothesis that different bursty intervals are independent. Furthermore, we introduce a special threshold to quantitatively distinguish the time scales of complex dynamics based on the hypothesis. Our results suggest that human communication behavior is a composite process of double dynamics with midrange memory length. The method for calculating memory length would enhance the performance of many sequence-dependent systems, such as server operation and topic identification.

Fired heater for coal liquefaction process

DOEpatents

Ying, David H. S.

1984-01-01

A fired heater for a coal liquefaction process is constructed with a heat transfer tube having U-bends at regular intervals along the length thereof to increase the slug frequency of the multi-phase mixture flowing therethrough to thereby improve the heat transfer efficiency.

Stochastic model for fatigue crack size and cost effective design decisions. [for aerospace structures

NASA Technical Reports Server (NTRS)

Hanagud, S.; Uppaluri, B.

1975-01-01

This paper describes a methodology for making cost effective fatigue design decisions. The methodology is based on a probabilistic model for the stochastic process of fatigue crack growth with time. The development of a particular model for the stochastic process is also discussed in the paper. The model is based on the assumption of continuous time and discrete space of crack lengths. Statistical decision theory and the developed probabilistic model are used to develop the procedure for making fatigue design decisions on the basis of minimum expected cost or risk function and reliability bounds. Selections of initial flaw size distribution, NDT, repair threshold crack lengths, and inspection intervals are discussed.

Computer analysis of three-dimensional morphological characteristics of the bile duct

NASA Astrophysics Data System (ADS)

Ma, Jinyuan; Chen, Houjin; Peng, Yahui; Shang, Hua

2017-01-01

In this paper, a computer image-processing algorithm for analyzing the morphological characteristics of bile ducts in Magnetic Resonance Cholangiopancreatography (MRCP) images was proposed. The algorithm consisted of mathematical morphology methods including erosion, closing and skeletonization, and a spline curve fitting method to obtain the length and curvature of the center line of the bile duct. Of 10 cases, the average length of the bile duct was 14.56 cm. The maximum curvature was in the range of 0.111 2.339. These experimental results show that using the computer image-processing algorithm to assess the morphological characteristics of the bile duct is feasible and further research is needed to evaluate its potential clinical values.

Small Angle Neutron Scattering Observation of Chain Retraction after a Large Step Deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.; Heinrich, M.; Pyckhout-Hintzen, W.

The process of retraction in entangled linear chains after a fast nonlinear stretch was detected from time-resolved but quenched small angle neutron scattering (SANS) experiments on long, well-entangled polyisoprene chains. The statically obtained SANS data cover the relevant time regime for retraction, and they provide a direct, microscopic verification of this nonlinear process as predicted by the tube model. Clear, quantitative agreement is found with recent theories of contour length fluctuations and convective constraint release, using parameters obtained mainly from linear rheology. The theory captures the full range of scattering vectors once the crossover to fluctuations on length scales belowmore » the tube diameter is accounted for.« less

Decreasing troponin turnaround time in the emergency department using the central laboratory: A process improvement study.

PubMed

Boelstler, Arlene M; Rowland, Ralph; Theoret, Jennifer; Takla, Robert B; Szpunar, Susan; Patel, Shraddha P; Lowry, Andrew M; Pena, Margarita E

2015-03-01

To implement collaborative process improvement measures to reduce emergency department (ED) troponin turnaround time (TAT) to less than 60min using central laboratory. This was an observational, retrospective data study. A multidisciplinary team from the ED and laboratory identified opportunities and developed a new workflow model. Process changes were implemented in ED patient triage, staffing, lab collection and processing. Data collected included TAT of door-to-order, order-to-collect, collect-to-received, received-to-result, door-to-result, ED length of stay, and hemolysis rate before (January-August, 2011) and after (September 2011-June 2013) process improvement. After process improvement and implementation of the new workflow model, decreased median TAT (in min) was seen in door-to-order (54 [IQR43] vs. 11 [IQR20]), order-to-collect (15 [IQR 23] vs. 10 [IQR12]), collect-to-received (6 [IQR8] vs. 5 [IQR5]), received-to-result (30 [IQR12] vs. 24 [IQR11]), and overall door-to-result (117 [IQR60] vs. 60 [IQR40]). A troponin TAT of <60min was realized beginning in May 2012 (59 [IQR39]). Hemolysis rates decreased (14.63±0.74 vs. 3.36±1.99, p<0.0001), as did ED length of stay (5.87±2.73h vs. 5.15±2.34h, p<0.0001). Conclusion Troponin TAT of <60min using a central laboratory was achieved with collaboration between the ED and the laboratory; additional findings include a decreased ED length of stay. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Device and method for shortening reactor process tubes

DOEpatents

Frantz, Charles E.; Alexander, William K.; Lander, Walter E. B.

1980-01-01

This disclosure describes a device and method for in situ shortening of nuclear reactor zirconium alloy process tubes which have grown as a result of radiation exposure. An upsetting technique is utilized which involves inductively heating a short band of a process tube with simultaneous application of an axial load sufficient to cause upsetting with an attendant decrease in length of the process tube.

Selecting Research Areas and Research Design Approaches in Distance Education: Process Issues

ERIC Educational Resources Information Center

Passi, B. K.; Mishra, Sudarshan

2004-01-01

The purpose of this paper is to study the process used for selecting research areas and methodological approaches in distance education in India. Experts from the field of distance education in India were interviewed at length, with the aim of collecting qualitative data on opinions on process-issues for selecting areas for research, research…

Short Shot Tower for Silicon

NASA Technical Reports Server (NTRS)

Bates, H. E.; Hill, D. M.; Jewett, D. N.

1983-01-01

Drop length necessary to convert molten silicon to shot reduced by proposed new process. Conversion of silicon from powder or chunks to shot often simplifies processing. Shot is more easily handled in most processing equipment. Drops of liquid silicon fall through protective cloud of argon, then through rapidly cooling bath of methanol, where they quickly turn into solid shot.

Co-processing of carbonaceous solids and petroleum oil

DOEpatents

Gupta, Avinash; Greene, Marvin I.

1992-01-01

In a process for producing distillates from coal by a first stage thermal liquefaction followed by a catalytic hydrogenation, liquefaction solvent is added at points spaced over the length of the thermal liquefaction heater. Coal may be co-processed with petroleum oil by adding pre-hydrogenated oil to the first stage or unhydrogenated oil to the second stage.

Determination of rational parameters for process of grinding materials pre-crushed by pressure in ball mill

NASA Astrophysics Data System (ADS)

Romanovich, A. A.; Romanovich, L. G.; Chekhovskoy, E. I.

2018-03-01

The article presents the results of experimental studies on the grinding process of a clinker preliminarily ground in press roller mills in a ball mill equipped with energy exchange devices. The authors studied the influence of the coefficients of loading for grinding bodies of the first and second mill chambers, their lengths, angles of inclination, and the mutual location of energy exchange devices (the ellipse segment and the double-acting blade) on the output parameters of the grinding process (productivity, drive power consumption and specific energy consumption). It is clarified that the best results of the disaggregation and grinding process, judging by the minimum specific energy consumption in the grinding of clinker with an anisotropic texture after force deformation between the rolls of a press roller shredder, are achieved at a certain angle of ellipse segment inclination; the length of the first chamber and the coefficients of loading the chambers with grinding bodies.

Modeling and Characterization of Damage Processes in Metallic Materials

NASA Technical Reports Server (NTRS)

Glaessgen, E. H.; Saether, E.; Smith, S. W.; Hochhalter, J. D.; Yamakov, V. I.; Gupta, V.

2011-01-01

This paper describes a broad effort that is aimed at understanding the fundamental mechanisms of crack growth and using that understanding as a basis for designing materials and enabling predictions of fracture in materials and structures that have small characteristic dimensions. This area of research, herein referred to as Damage Science, emphasizes the length scale regimes of the nanoscale and the microscale for which analysis and characterization tools are being developed to predict the formation, propagation, and interaction of fundamental damage mechanisms. Examination of nanoscale processes requires atomistic and discrete dislocation plasticity simulations, while microscale processes can be examined using strain gradient plasticity, crystal plasticity and microstructure modeling methods. Concurrent and sequential multiscale modeling methods are being developed to analytically bridge between these length scales. Experimental methods for characterization and quantification of near-crack tip damage are also being developed. This paper focuses on several new methodologies in these areas and their application to understanding damage processes in polycrystalline metals. On-going and potential applications are also discussed.

Spatial analysis of extension fracture systems: A process modeling approach

USGS Publications Warehouse

Ferguson, C.C.

1985-01-01

Little consensus exists on how best to analyze natural fracture spacings and their sequences. Field measurements and analyses published in geotechnical literature imply fracture processes radically different from those assumed by theoretical structural geologists. The approach adopted in this paper recognizes that disruption of rock layers by layer-parallel extension results in two spacing distributions, one representing layer-fragment lengths and another separation distances between fragments. These two distributions and their sequences reflect mechanics and history of fracture and separation. Such distributions and sequences, represented by a 2 ?? n matrix of lengthsL, can be analyzed using a method that is history sensitive and which yields also a scalar estimate of bulk extension, e (L). The method is illustrated by a series of Monte Carlo experiments representing a variety of fracture-and-separation processes, each with distinct implications for extension history. Resulting distributions of e (L)are process-specific, suggesting that the inverse problem of deducing fracture-and-separation history from final structure may be tractable. ?? 1985 Plenum Publishing Corporation.

Level-crossing statistics of the horizontal wind speed in the planetary surface boundary layer

NASA Astrophysics Data System (ADS)

Edwards, Paul J.; Hurst, Robert B.

2001-09-01

The probability density of the times for which the horizontal wind remains above or below a given threshold speed is of some interest in the fields of renewable energy generation and pollutant dispersal. However there appear to be no analytic or conceptual models which account for the observed power law form of the distribution of these episode lengths over a range of over three decades, from a few tens of seconds to a day or more. We reanalyze high resolution wind data and demonstrate the fractal character of the point process generated by the wind speed level crossings. We simulate the fluctuating wind speed by a Markov process which approximates the characteristics of the real (non-Markovian) wind and successfully generates a power law distribution of episode lengths. However, fundamental questions concerning the physical basis for this behavior and the connection between the properties of a continuous-time stochastic process and the fractal statistics of the point process generated by its level crossings remain unanswered.

Hydrological Storage Length Scales Represented by Remote Sensing Estimates of Soil Moisture and Precipitation

NASA Astrophysics Data System (ADS)

Akbar, Ruzbeh; Short Gianotti, Daniel; McColl, Kaighin A.; Haghighi, Erfan; Salvucci, Guido D.; Entekhabi, Dara

2018-03-01

The soil water content profile is often well correlated with the soil moisture state near the surface. They share mutual information such that analysis of surface-only soil moisture is, at times and in conjunction with precipitation information, reflective of deeper soil fluxes and dynamics. This study examines the characteristic length scale, or effective depth Δz, of a simple active hydrological control volume. The volume is described only by precipitation inputs and soil water dynamics evident in surface-only soil moisture observations. To proceed, first an observation-based technique is presented to estimate the soil moisture loss function based on analysis of soil moisture dry-downs and its successive negative increments. Then, the length scale Δz is obtained via an optimization process wherein the root-mean-squared (RMS) differences between surface soil moisture observations and its predictions based on water balance are minimized. The process is entirely observation-driven. The surface soil moisture estimates are obtained from the NASA Soil Moisture Active Passive (SMAP) mission and precipitation from the gauge-corrected Climate Prediction Center daily global precipitation product. The length scale Δz exhibits a clear east-west gradient across the contiguous United States (CONUS), such that large Δz depths (>200 mm) are estimated in wetter regions with larger mean precipitation. The median Δz across CONUS is 135 mm. The spatial variance of Δz is predominantly explained and influenced by precipitation characteristics. Soil properties, especially texture in the form of sand fraction, as well as the mean soil moisture state have a lesser influence on the length scale.