An Analytical Overview of Spirituality in NANDA-I Taxonomies.

PubMed

Mesquita, Ana Cláudia; Caldeira, Sílvia; Chaves, Erika; Carvalho, Emilia Campos de

2017-03-01

To discuss the approach of spirituality in NANDA-I taxonomies, based on the elements that characterize this phenomenon. This study was based on concepts that are usually adopted in the literature for defining spirituality and on the analysis of the NANDA-I taxonomies from I to III. Spirituality is included in all taxonomies but all three are missing some attributes to guarantee the completeness of this dimension for nursing diagnosis. Taxonomy III makes different approaches to spirituality and some inconsistencies. Contribute to the development and review of the new proposal for taxonomy. Discutir a abordagem à espiritualidade nas taxonomias da NANDA-I, baseada nos elementos que caracterizam este fenômeno. MÉTODOS: Este estudo foi baseado em conceitos usualmente adotados na literatura de enfermagem para definir espiritualidade e na análise das taxonomias da NANDA-I, desde a I à III. A espiritualidade está incluída nas taxonomias, porém estas carecem de atributos do seu conceito. CONCLUSÕES: A taxonomia III faz diferentes abordagens à espiritualidade, porém com algumas inconsistências identificadas. IMPLICAÇÕES PARA A ENFERMAGEM: Esta análise pode contribuir para o desenvolvimento e revisão da taxonomia III. © 2017 NANDA International, Inc.

The development of communication skills and the teacher's performance in the nursing student's perspective.

PubMed

Oliveira, Karime Rodrigues Emilio de; Braga, Eliana Mara

2016-06-01

To understand experiences in the development of communication skills and the teacher's role in this teaching-learning process under the perspective of undergraduate nursing students by considering two types of curriculum organization. Descriptive study with a qualitative approach conducted in two public schools located in São Paulo state, Brazil. Data were collected by means of self-completed forms from 81 students in the second and fourth years of the undergraduate program. Results were analyzed in light of Content Analysis. Results showed that the development of such skills is related to: students' individual characteristics, patients' characteristics, those of the health-disease process, the health-care team's profile and the theoretical knowledge acquired on communication in health-care provision and nursing. The teacher's role was perceived as one that supports and encourages interactions with patients and health-care teams by teaching and providing orientation about interpersonal communication. Students identify and value the importance of their teachers' performance in the development and acquisition of communication skills. Additionally, students who experience active teaching-learning methodologies acknowledge the teacher as essential to provide opportunities for students to express their knowledge and thoughts. Compreender, sob a ótica de graduandos de enfermagem, as experiências no desenvolvimento de habilidades comunicativas e a atuação do professor neste processo de ensino-aprendizagem, considerando dois tipos de organização curricular. Pesquisa descritiva com abordagem qualitativa, realizada em duas instituições de ensino públicas, situadas no interior do estado de São Paulo, Brasil. A coleta dos dados foi realizada pelo autopreenchimento de formulário por 81 alunos de segundo e quartos anos da graduação. Os resultados foram analisados à luz da Análise de Conteúdo. Revelaram que o desenvolvimento desta habilidade está relacionado à: características individuais dos alunos, dos pacientes, do processo saúde-doença, perfil da equipe e dos conhecimentos teóricos sobre comunicação em saúde e em enfermagem. O papel do professor foi percebido apoiando e incentivando as interações com pacientes e equipes de saúde e ensinando e orientando sobre comunicação interpessoal. Os alunos identificam e valorizam a importância da atuação de seus professores no desenvolvimento e aquisição de habilidades comunicativas. Além disso, os estudantes que vivenciaram as metodologias ativas de ensino-aprendizagem reconhecem o docente essencial para oportunizar a expressão de conhecimentos e pensamentos dos alunos.

Analysis of suffering at work in Family Health Support Centers.

PubMed

Nascimento, Débora Dupas Gonçalves do; Oliveira, Maria Amélia de Campos

2016-01-01

Analyzing the work process in the Family Health Support Center. An exploratory, descriptive case study using a qualitative approach. Focus groups were conducted with 20 workers of a Family Health Support Center, and the empirical material was subjected to content analysis technique and analyzed in light of Work Psychodynamics. The category of suffering is presented herein as arising from the dialectical contradiction between actual work and prescribed work, from resistance to the Family Health Support Center's proposal and a lack of understanding of their role; due to an immediatist and curative culture of the users and the Family Health Strategy; of the profile, overload and identification with work. The dialectical contradiction between expectations from Family Health Strategy teams and the work in the Family Health Support Center compromises its execution and creates suffering for workers. Analisar o processo de trabalho no Núcleo de Apoio à Saúde da Família. Estudo de caso exploratório, descritivo e de abordagem qualitativa. Grupos focais foram realizados com 20 trabalhadores do Núcleo de Apoio à Saúde da Família, o material empírico foi submetido à técnica de análise de conteúdo e analisado à luz da Psicodinâmica do Trabalho. Apresenta-se aqui a categoria sofrimento que neste estudo decorre da contradição dialética entre o trabalho real e o trabalho prescrito, da resistência à proposta do Núcleo de Apoio à Saúde da Família e da falta de compreensão de seu papel; da cultura imediatista e curativa do usuário e da Estratégia Saúde da Família; do perfil, sobrecarga e identificação com o trabalho. A contradição dialética entre expectativas das equipes da Estratégia Saúde da Família e o trabalho no Núcleo de Apoio à Saúde da Família compromete sua efetivação e gera sofrimento aos trabalhadores.

AIDS and jail: social representations of women in freedom deprivation situations.

PubMed

Trigueiro, Débora Raquel Soares Guedes; Almeida, Sandra Aparecida de; Monroe, Aline Aparecida; Costa, Gilka Paiva Oliveira; Bezerra, Valéria Peixoto; Nogueira, Jordana de Almeida

2016-01-01

To graspthe AIDS social representations built by freedom-deprived women. Descriptive study with a quali-quantitative approach that involved 174 convicted women in a women's prison in a capital city of the Brazilian northeastern region. Aword-association test was applied in October and November 2014, using AIDS as a stimulus. The corpuswas processed usingIramuteq software. Descending Hierarchical Classification and Correspondence Factor Analysis were applied. The content that comprises the social representation of AIDS was influenced by the prison context, which was pervaded by a lack of assistance, lack of knowledge, discrimination, and suffering that disclosed vulnerability to HIV/AIDS factors such as unprotected sex and object sharing. This underlines the stigma and fear of the illness, in addition to favoring and supporting negative feelings and a sense of rejection. To consider the use of this representational amalgam to ensure a comprehensive, contextualized care can help redirect practices, motivate self-care practices, and reduce prejudiced attitudes. Apreenderas representações sociais sobre a aids construídas por mulheres privadas de liberdade. Estudo descritivo, com abordagem quali-quantitativa que envolveu 174 apenadas de Presídio Feminino situado em capital do nordeste brasileiro. Aplicou-se o Teste de Associação Livre de Palavras, em outubro e novembro de 2014, utilizando-se do estímulo aids. O corpus foi processado pelo software Iramuteq, sendo efetuadas a Classificação Hierárquica Descendente e Análise Fatorial de Correspondência. Os conteúdos que compõem a representação social sobre aids são influenciados pelo contexto prisional, permeado dedesassistência, desconhecimento, discriminação e condições de sofrimento, revelando fatores de vulnerabilidade ao HIV/Aids como atividade sexual desprotegida e compartilhamento de objetos; reiterando o estigma e o temor à doença; e favorecendo e sustentando sentimentos negativos e de rejeição. Considerar este amálgama representacional na garantia de um cuidado integral e contextualizado pode contribuir para redirecionar práticas, motivar condutas de autocuidado e reduzir atitudes preconceituosas.

Seismic ground motion scenarios in Lower Tagus Valley Basin

NASA Astrophysics Data System (ADS)

Borges, José; Torres, Ricardo; Furtado, José; Silva, Hugo; Caldeira, Bento; Pinto, Carlos; Bezzeghoud, Mourad; Carvalho, João

2013-04-01

Throughout its history the Lower Tagus Valley (LTV) has been struck by several earthquakes which produced important material damage and loss of lives: The 1st of November 1755 Lisbon earthquake and the 1969 earthquake (Mw=7.3), located in the SW Iberia Margin and the 1344, 1531 and 1909 (M= 6 to 7) with epicenter located inside the LTV basin. Since this region is the most highly populated region in Portugal, it is expected that an earthquake of similar magnitude of those that have occurred in the past will cause an enormous destruction and casualties. This fact makes LTV a high priority area for earthquake research in Portugal. In order to overcome the problems related to the absence of geological outcrops, low slip-rates (<0,4 mm/year) and the processes of sedimentation and erosion, we use in this work seismic reflection profiles, potential field data, soundings, wells and geological cartography to obtain a map of the main seismogenic structures and to characterize their seismic potential [1]. Moreover, a 3D structural model has been developed for de LTV based on Seismic reflection, Seismic Noise and potential field data [2,3]. In order to improve assessment of the seismic hazard in the LTV basin, we simulate long-period (0-1 Hz) ground motion time histories for a suite of scenarios earthquakes (Mw =5.5 to 7) within the basin, using fault geometries and the 3D seismic velocity structure based on the previous mentioned works. References [1] Pinto, Carlos C. (2011). Identification of Seismogenic Structures in the Lower Tagus Basin. Master Thesis, Universidade de Évora, 128 pp. [2] Torres, R.J.G., (2012). Modelo de velocidade da Bacia do Vale do Tejo: uma abordagem baseada no estudo do ruído sísmico ambiental, Master Thesis, Universidade de Évora, 83pp. [3] Furtado, J.A (2010). Confirmação do modelo da estrutura 3D do Vale Inverior do Tejo a partir de dados de ruído sísmico ambiente, Master Thesis, Universidade de Évora, 136pp.

Terms of the specialized nursing language for the care of ostomates.

PubMed

Carvalho, Carina Maris Gaspar; Cubas, Marcia Regina; Nóbrega, Maria Miriam Lima da

2017-01-01

to identify terms of the specialized nursing language for the care of ostomates from the literature of the area, and to map the identified terms with terms of the International Classification for Nursing Practice (ICNP®). descriptive study of quantitative approach guided by the guidelines for the elaboration of terminology subsets of the ICNP®. The terms were collected in 49 scientific articles, extracted using a computational tool, selected according to the relevance for the theme, and normalized and mapped with the ICNP®. 20,668 terms were extracted. The standardization process resulted in 425 relevant terms (151 were constant in ICNP® and 274 were not contained in ICNP®), of which 154 were similar, 19 were more comprehensive, 50 were more restricted, and 51 were not in concordance. the use of standardized language can minimize the ambiguities and redundancies identified in the mapping. The existence of terms not in concordance with the ICNP® reinforces the need for constant updating of this classification. identificar termos da linguagem especializada de enfermagem para o cuidado à pessoa ostomizada, a partir da literatura da área; e mapear os termos identificados com termos da Classificação Internacional para a Prática de Enfermagem (CIPE®). étodo: pesquisa descritiva, de abordagem quantitativa, orientada pelas diretrizes para a elaboração de subconjuntos terminológicos da CIPE®. Os termos foram coletados em 49 artigos científicos, extraídos com uso de ferramenta computacional, selecionados de acordo com a pertinência ao tema, normalizados e mapeados com a CIPE®. foram extraídos 20.668 termos. A normalização resultou em 425 termos pertinentes, sendo: 151 termos constantes e 274 não constantes na CIPE®; dos quais 154 similares, 19 mais abrangentes, 50 mais restritos e 51 sem concordância. o uso de linguagem padronizada pode minimizar ambiguidades e redundâncias identificadas no mapeamento. A existência de termos sem concordância com a CIPE® reforça a necessidade de atualização constante dessa classificação.

Quality control method to measure predator evasion in wild and mass-reared Mediterranean fruit flies (Diptera: Tephritidae)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendrichs, M.; Wornoayporn, V.; Hendrichs, J.

Sterile male insects, mass-reared and released as part of sterile insect technique (SIT) programs, must survive long enough in the field to mature sexually and compete effectively with wild males for wild females. An often reported problem in Mediterranean fruit fly (medfly) Ceratitis capitata (Wiedemann) SIT programs is that numbers of released sterile males decrease rapidly in the field for various reasons, including losses to different types of predators. This is a serious issue in view that most operational programs release sterile flies at an age when they are still immature. Previous field and field-cage tests have confirmed that fliesmore » of laboratory strains are less able to evade predators than wild flies. Such tests involve, however, considerable manipulation and observation of predators and are therefore not suitable for routine measurements of predator evasion. Here we describe a simple quality control method with aspirators to measure agility in medflies and show that this parameter is related to the capacity of flies to evade predators. Although further standardization of the test is necessary to allow more accurate inter-strain comparisons, results confirm the relevance of measuring predator evasion in mass-reared medfly strains. Besides being a measure of this sterile male quality parameter, the described method could be used for the systematic selection of strains with a higher capacity for predator evasion. (author) [Spanish] Insectos machos esteriles criados en forma masiva para ser liberados en programas que utilizan la tecnica del insecto esteril (TIE), tienen que tener la capacidad de sobrevivir en el campo el tiempo necesario para poder madurar sexualmente y competir efectivamente con los machos silvestres por hembras silvestres. Un problema frecuentemente reportado por dichos programas de la mosca del Mediterraneo, Ceratitis capitata (Wiedemann), es que el numero de machos esteriles de laboratorio liberados en el campo, decrecen rapidamente por varias razones, incluyendo perdidas debidas a diferentes tipos de depredadores. Estudios anteriores conducidos en el campo, y en jaulas de campo, han confirmado que las cepas de machos de laboratorio tienen menos capacidad de evadir depredadores que los machos silvestres. Estos estudios involucran, sin embargo, una considerable cantidad de manipulacion y observacion de depredadores, por lo que no son adecuados para ser usados como medidas rutinarias en los programas de cria masiva. Aqui describimos un metodo sencillo de control de calidad usando aspiradores para medir agilidad en la mosca del Mediterraneo y mostramos que este parametro esta relacionado a la capacidad de la moscas a evadir a depredadores. Aunque aun es necesario refinar la estandarizacion de este metodo para permitir la comparacion entre cepas, los resultados confirman la importancia de tener un metodo rutinario para medir la capacidad de evasion de depredadores en cepas de cria de laboratorio de la mosca del Mediterraneo. Ademas de medir este parametro de control de calidad de los machos esteriles, el metodo descrito podria tambien ser usado para la seleccion sistematica de cepas con una mayor capacidad de evasion de depredadores. (author)« less

Fuzzy model to estimate the number of hospitalizations for asthma and pneumonia under the effects of air pollution.

PubMed

Chaves, Luciano Eustáquio; Nascimento, Luiz Fernando Costa; Rizol, Paloma Maria Silva Rocha

2017-06-22

Predict the number of hospitalizations for asthma and pneumonia associated with exposure to air pollutants in the city of São José dos Campos, São Paulo State. This is a computational model using fuzzy logic based on Mamdani's inference method. For the fuzzification of the input variables of particulate matter, ozone, sulfur dioxide and apparent temperature, we considered two relevancy functions for each variable with the linguistic approach: good and bad. For the output variable number of hospitalizations for asthma and pneumonia, we considered five relevancy functions: very low, low, medium, high and very high. DATASUS was our source for the number of hospitalizations in the year 2007 and the result provided by the model was correlated with the actual data of hospitalization with lag from zero to two days. The accuracy of the model was estimated by the ROC curve for each pollutant and in those lags. In the year of 2007, 1,710 hospitalizations by pneumonia and asthma were recorded in São José dos Campos, State of São Paulo, with a daily average of 4.9 hospitalizations (SD = 2.9). The model output data showed positive and significant correlation (r = 0.38) with the actual data; the accuracies evaluated for the model were higher for sulfur dioxide in lag 0 and 2 and for particulate matter in lag 1. Fuzzy modeling proved accurate for the pollutant exposure effects and hospitalization for pneumonia and asthma approach. Prever o número de internações por asma e pneumonia associadas à exposição a poluentes do ar no município em São José dos Campos, estado de São Paulo. Trata-se de um modelo computacional que utiliza a lógica fuzzy baseado na técnica de inferência de Mamdani. Para a fuzzificação das variáveis de entrada material particulado, ozônio, dióxido de enxofre e temperatura aparente foram consideradas duas funções de pertinência para cada variável com abordagem linguísticas: bom e ruim. Para a variável de saída número internações por asma e pneumonia, foram consideradas cinco funções de pertinências: muito baixo, baixo, médio, alto e muito alto. O número de internações no ano de 2007 foi obtido do Datasus e o resultado fornecido pelo modelo foi correlacionado com os dados reais de internação com defasagem (lag) de zero a dois dias. A acurácia do modelo foi estimada pela curva ROC para cada poluente e nestas defasagens. No ano de 2007 foram registradas 1.710 internações por pneumonia e asma em São José dos Campos, SP, com média diária de 4,9 internações (dp = 2,9). Os dados de saída do modelo mostraram correlação positiva e significativa (r = 0,38) com os dados reais; as acurácias avaliadas para o modelo foram maiores para o dióxido de enxofre nos lag 0 e 2 e para o material particulado no lag 1. Modelagem fuzzy se mostrou acurada para a abordagem de efeitos da exposição aos poluentes e internação por pneumonia e asma.

Surgical correction of ectopic penis and scrotum associated with bilateral orchidopexy.

PubMed

Sobral, Daniel Santos Rocha; Silva, Helder Damásio da; Damázio, Eulálio

2017-01-01

Ectopic penis is usually associated with penoscrotal transposition, and it is rarely observed in isolation. We report a surgical approach for an extremely rare case. A 10-year-old male patient with bilateral cryptorchidism and ectopic penis and scrotum in perineal area, with no penoscrotal transposition, representing an association not yet described in literature. A previous orchiopexy failed due to ectopic scrotum. By means of an inverted Y incision, the penis was mobilized and a perineal skin flap in form of a testicular sac was prepared. Finally orchiopexy was performed. The surgery was essential to treat cryptorchidism and to improve the self-image of the patient. RESUMO O pênis ectópico geralmente ocorre associado à transposição peno-escrotal, sendo raro isoladamente. Relatamos uma abordagem cirúrgica para um caso extremamente raro. Tratava-se de paciente do sexo masculino, 10 anos, com criptorquidia bilateral e pênis e escroto ectópicos, na região perineal, sem transposição peno-escrotal, representando uma associação ainda não descrita na literatura. Orquidopexia prévia sem sucesso, devido à ectopia do escroto. Por meio de uma incisão em Y invertido, mobilizou-se o pênis e preparou-se um retalho da pele perineal em forma de bolsa testicular. Por fim, realizou-se a orquidopexia. A cirurgia foi fundamental para tratar a criptorquidia e promover ganho na autoimagem do paciente.

Teaching astronomy mediated by information and communication technologies: a preliminary approach

NASA Astrophysics Data System (ADS)

Rosa, R. H. L.; Voelzke, M. R.

2014-08-01

O presente trabalho é parte preliminar de um estudo mais amplo em nível de doutorado sobre o ensino de astronomia mediado pelas tecnologias da informação e comunicação, utilizando dispositivos compactos, móveis e pessoais. Este estudo também faz parte do projeto institucional do CEFETMG sobre ambientes diversificados de aprendizagem sob fomento da agência estadual FAPEMIG (Fundação de Amparo à Pesquisa do Estado de Minas Gerais). Esta apresentação aborda o resultado das concepções prévias de estudantes em relação a conhecimentos básicos de astronomia, ligados à percepção e observação direta do céu. Três turmas de estudantes de 1ª série e uma turma de 3ª série do ensino integrado médio técnico da Educação Básica, Técnica e Tecnológica (EBTT) do CEFETMG Campus II - Belo Horizonte/MG foram submetidas a uma avaliação prévia através de questionário estruturado. Este questionário foi elaborado de forma a abordar a percepção dos estudantes em relação aos recursos gráficos (figuras e desenhos) representativos de conhecimentos básicos de astronomia, comuns em livros didáticos. Após a análise dos resultados desta avaliação, organizou-se uma estratégia de intervenção didática em sala de aula sobre o conteúdo de astronomia, utilizando-se de recursos de mediação baseados nas tecnologias da informação e comunicação. Os temas selecionados para esta estratégia didática foram relacionados aos assuntos básicos de astronomia em que ocorreu maior nível de desconhecimento dos estudantes. Os estudantes foram submetidos a avaliação posterior elaborada com os mesmos pressupostos da avaliação prévia. A análise dos resultados foi realizada a partir dos pressupostos da aprendizagem significativa (Ausubel; Novak e Hanesian, 1983). O ensino de astronomia por mediação das tecnologias da informação e comunicação indica uma alternativa preliminar aos trabalhos de campo usuais orientados na prática escolar, tais como, visita a planetários e a observatórios. Os estudantes ficaram muito sensibilizados pela possibilidade de percepção do céu em tempo real e à luz do dia dentro da sala de aula no contexto escolar. Os resultados deste levantamento preliminar indicam que os níveis de ensino fundamental e médio não foram capazes de internalizar conhecimentos básicos de astronomia, a despeito das orientações específicas contidas nos documentos oficiais da educação básica brasileira (Brasil, 1997 e 2000). Os estudantes pesquisados apresentaram conhecimentos e concepções rudimentares sobre o tema astronomia básica, indicando a ausência de abordagem do tema astronomia, tampouco de observação direta do céu em trabalhos de campo escolares na educação básica. Finalmente, esta abordagem didática suscitou nos estudantes grande interesse para futuros trabalhos de observação de campo. D.P. Ausubel; J.D. Novak; H. Hanesian. Psicología Educativa: un punto de vista cognoscitivo. México: Trillas, 1983. BRASIL. Secretaria de Educação Básica. Parâmetros Curriculares Nacionais: Ensino Fundamental (PCN), 1997, e Ensino Médio (PCNEM), 2000. Brasília. MEC/SEB.

Paradox of life among survivors of bladder cancer and treatments.

PubMed

Lopes, Miriam; Nascimento, Lucila Castanheira; Zago, Márcia Maria Fontão

2016-04-01

To interpret the meanings attributed to the experience of bladder cancer among survivors in therapeutic follow-up. Qualitative methodological approach, based on medical anthropology and narrative methodology. After approval by the research ethics committee of a public university hospital, data were collected from January 2014 to February 2015, by means of recorded semi-structured interviews, direct observation and field journal entries on daily immersion with a group of six men and six women, aged between 57 and 82 years, in therapeutic follow-up. Narratives were analyzed by means of inductive thematic analysis. The meanings revealed difficulties with the processes of disease and treatment, such as breakdown of normal life, uncertainty about the future due to possible recurrence of the disease, difficulty with continuity of care and emotional control, relating it to conflicting ways of understanding the present life. Thus, the meaning of this narrative synthesis is paradox. Interpretation of the meaning of experience with bladder cancer among patients provides nurses with a comprehensive view of care, which encompasses biological, psychological and social dimensions, and thereby systematizes humanized care. Interpretar o significado atribuído à experiência do câncer de bexiga entre sobreviventes em seguimento terapêutico. Empregou-se a abordagem metodológica qualitativa, embasado pela antropologia médica e método narrativo. Após aprovação do Comitê de Ética, os dados foram coletados de janeiro 2014 a fevereiro de 2015, por meio de entrevistas semiestruturadas gravadas, observação direta e registros no diário de imersão com grupo de seis homens e seis mulheres, entre 57 e 82 anos, em seguimento terapêutico em um hospital público universitário. As narrativas foram analisadas por meio da análise temática indutiva. Os sentidos revelam as dificuldades com o processo da doença e do tratamento, como rupturas na vida, futuro incerto pela possibilidade de recidiva da doença, continuidade do tratamento e controle emocional, relacionando-se com as ponderações contraditórias da vida atual. Assim, o significado desta síntese narrativa é de paradoxo. A interpretação do significado da experiência com câncer de bexiga entre os adoecidos permite ao enfermeiro um olhar integralizado do cuidado que perpasse as dimensões biopsicossociais dos adoecidos e, com isso, sistematize a assistência de maneira humanizada.

Subluxação da mandíbula para abordagem de bifurcação carotídea alta em paciente com parotidite por contraste iodado: relato de caso e revisão de literatura

PubMed Central

dos Santos, Reinaldo Benevides; Queiroz, André Brito; Fidelis, Ronald José Ribeiro; Lopes, Cicero Fidelis; de Araújo, José Siqueira

2017-01-01

Resumo A doença aterosclerótica das carótidas extracranianas pode resultar em complicações com alta morbidade e mortalidade. A avaliação pré-operatória com exames contrastados de imagem é associada a complicações como a parotidite, além das já bem conhecidas reações alérgicas e da disfunção renal. A bifurcação carotídea alta e a doença aterosclerótica de extensão cranial costumam ser fatores limitantes para o tratamento cirúrgico convencional. Entretanto, quando há contraindicação ao uso de contraste iodado ou impossibilidade do tratamento endovascular, há a necessidade do conhecimento de técnicas cirúrgicas que permitam a realização da endarterectomia com segurança. A subluxação da mandíbula se mostrou uma técnica adjuvante segura e efetiva, de fácil execução e reprodutibilidade, possibilitando o acesso a bifurcações carotídeas altas com boa exposição do campo cirúrgico e permitindo a realização da endarterectomia conforme a técnica padrão. Apresentamos o caso de uma paciente com bifurcação carotídea alta e com limitações para uso do contraste iodado que foi submetida a endarterectomia carotídea após subluxação de mandíbula. PMID:29930669

Palliative care and nursing in dissertations and theses in Portugal: a bibliometric study.

PubMed

Ferreira, Maria Amélia Leite; Pereira, Alexandra Manuela Nogueira de Andrade; Martins, José Carlos Amado; Barbieri-Figueiredo, Maria do Céu

2016-04-01

To identify the academic scientific production on palliative care in master dissertations and PhD theses carried out by nurses in Portugal. A descriptive retrospective study of bibliometric type with search for the abstracts available in repositories of higher education institutions in the period 2000-2014. Of the 1814 papers identified, 249 met the inclusion criteria (ten doctoral theses and 239 master dissertations). The most representative methodological approach was quantitative (31.35%) and the most studied area was family/informal caregiver (20.69%). The most studied target population were the students/health professionals (38.51%). The academic scientific production in this area has been growing in spite of the need for continued investment in order to fill the identified gaps. Identificar a produção científica académica sobre cuidados paliativos nos estudos de mestrados e doutoramentos efetuados por enfermeiros em Portugal. Estudo descritivo e retrospetivo, do tipo bibliométrico, recorrendo aos resumos disponíveis nos repositórios das instituições de ensino superior no período 2000-2014. Dos 1814 trabalhos identificados, 249 corresponderam aos critérios de inclusão (10 teses de doutoramento e 239 dissertações de mestrado). A abordagem metodológica mais representativa é a quantitativa (31,35%), a área mais estudada foi a família/cuidador informal (20,69%) e a população-alvo mais estudada foram os estudantes/profissionais de saúde (38,51%). A produção científica académica nessa área tem vindo a crescer. Embora exista necessidade de investimento contínuo de forma a colmatar as lacunas identificadas.

Sobre o uso das séries de Puiseux em mecanica celeste

NASA Astrophysics Data System (ADS)

Miloni, O. I.

2003-08-01

Neste trabalho é apresentada uma demonstração do uso dos diferentes desenvolvimentos em séries para as equações de perturbação em Mecânica Celeste no marco Hamiltoniano. Em trabalhos clássicos como os de Poincaré (Poincaré, 1893) por exemplo, já esta planteado o uso de potências não inteiras no pequeno parâmetro, o que evidencia a não analiticidade das funções quando uma ressonância ocorre. Nestes trabalhos os desenvolvimentos são na raíz quadrada da massa de Júpiter (o pequeno parâmetro). Mais recentemente (Ferraz-Mello, 1985) outros tipos de desenvolvimentos foram aplicados modificando substancialmente as ordens de grandeza e a velocidade de convergência das séries. Com esta abordagem, os desenvolvimentos foram expressados em termos da raíz cúbica do pequeno parâmetro. Neste trabalho apresentamos um enfoque geral, onde os diferentes tipos de desenvolvimentos em séries de Puiseux (Valiron, 1950) são obtidos a partir da aplicação de Teorema de Preparação de Weierstrass (Goursat, 1916) considerando a equação de Hamilton-Jacobi como uma equação algébrica. Os resultados são aplicados ao problema restrito dos três corpos em ressonância de primeira ordem e, dependendo da grandeza da excentricidade do asteróide em relação à de Júpiter, obtemos os diferentes desenvolvimentos, em raíz quadrada ou raíz cúbica da massa de Júpiter.

A Concepção de Universo entre Alunos do Ensino Médio de São Paulo e suas Fontes de Aquisição

NASA Astrophysics Data System (ADS)

Araújo, M. A. A.; Elias, D. C. N.; Amaral, L. H.; Araújo, M. S. T.; Voelzke, M. R.

2006-08-01

Nesse trabalho procurou-se identificar por meio de um questionário as concepções de Universo, de espaço e tempo que sustentam a visão de mundo de um grupo de 270 estudantes de Ensino Médio, pertencentes a três escolas de São Paulo. As questões relacionadas aos conhecimentos prévios dos estudantes permitiram constatar que há pouco conhecimento acerca dos temas investigados, destacando-se que apenas 20% dos alunos foram capazes de relacionar as semanas com as fases da lua, enquanto 28% associaram as estações do ano à inclinação do eixo de rotação da Terra e 23% tinham noções das distâncias entre objetos celestes próximos da Terra. Enquanto 56% conseguiram relacionar o Big Bang com a origem do Universo, verificou-se que 37% reconheciam ano-luz como unidade de distância e 60% concebiam o Sol como uma estrela. No que se refere às fontes de aquisição que proporcionaram esses conhecimentos, apesar de 60% dos alunos indicarem a escola como principal fonte dos conhecimentos de Ast! ronomia, verificou-se claramente que para a maioria dos alunos seus conceitos ainda são inadequados, havendo necessidade de aprimoramento da abordagem desses conteúdos, pois apesar de popular, a Astronomia ainda é veiculada de maneira pouco esclarecedora e com imprecisões. Nesse contexto, são discutidas algumas possíveis contribuições que podem ser dadas para o ensino de Astronomia pelo uso das ferramentas computacionais nas escolas.

Robotic-assisted modified retroauricular cervical approach: initial experience in Latin America.

PubMed

Chulam, Thiago Celestino; Lira, Renan Bezerra; Kowalski, Luiz Paulo

2016-01-01

to evaluate the thickness of the gastric wall at the time of intra gastric balloon (IGB) placement, at the time of its withdrawal and one month after withdrawal. fifteen morbidly obese patients underwent the introduction of IGB under general anesthesia. In all patients, there was infusion of 500ml of distilled water in the balloon for the test. Measurements of the thickness of the gastric wall were made in the antrum, body and proximal body, using a radial echoendoscope with a frequency of 12MHz and maximum zoom, and its own balloon inflated with 5ml of distilled water. the presence of IGB led to increased wall thickness of the gastric body by expanding the muscle layer. These changes were apparently transient, since 30 days after the balloon withdrawal there was a tendency to return of the wall thickness values ​​observed before the balloon insertion. the use of intragastric balloon for the treatment of obesity determines transient increase in the wall thickness of the gastric body caused by expanded muscle layer. A preocupação com a melhoria dos resultados estéticos e funcionais sem comprometimento dos resultados oncológicos na cirurgia de cabeça e pescoço tem aumentado significativamente. Os procedimentos minimamente invasivos e principalmente aqueles que utilizam a tecnologia robótica permitiram o desenvolvimento de novas abordagens, incluindo o acesso retroauricular, que agora é usado rotineiramente, especialmente na Coréia do Sul. A presente nota irá ilustrar a técnica e a experiência inicial na América Latina, demonstrando que esta abordagem é viável, segura e eficaz oncologicamente, podendo ser utilizada em casos selecionados com um benefício estético evidente.

On Ensino de Astronomia: Desafios para Implantação

NASA Astrophysics Data System (ADS)

Faria, R. Z.; Voelzke, M. R.

2008-09-01

Em 2002 o ensino de Astronomia foi proposto como um dos temas estruturadores pelos Parâmetros Curriculares Nacionais e sugerido como facilitador para que o aluno compreendesse a Física como construção humana e parte do seu mundo vivencial, mas raramente seus conceitos foram ensinados. A presente pesquisa discute dois aspectos relacionados à abordagem de Astronomia. O primeiro aspecto é se ela está sendo abordada pelos professores do Ensino Médio e o segundo, aborda a maneira como ela está sendo ensinada. Optou-se pela aplicação de um questionário a partir do 2° semestre de 2006 e durante o ano de 2007 com professores que ministram a disciplina de Física, os quais trabalham em escolas estaduais em Rio Grande da Serra, Ribeirão Pires e Mauá no estado São Paulo. Dos 66,2% dos professores que responderam ao questionário nos municípios de Rio Grande da Serra, Ribeirão Pires e Mauá, 57,4% não aplicaram nenhum tópico de astronomia, 70,2% não utilizaram laboratório, 89,4% não utilizaram qualquer tipo de programa computacional, 83,0% nunca fizeram visitas com alunos a museus e planetários e 38,3% não indicaram qualquer tipo de livro ou revista referente à astronomia aos seus alunos. Mesmo considerando a Astronomia um conteúdo potencialmente significativo, esta não fez parte dos planejamentos escolares. Portanto são necessárias propostas que visem estratégias para a educação continuada dos professores como, por exemplo, cursos específicos sobre o ensino em Astronomia.

Developing and Testing of a Software Prototype to Support Diagnostic Reasoning of Nursing Students.

PubMed

de Sousa, Vanessa Emille Carvalho; de Oliveira Lopes, Marcos Venícios; Keenan, Gail M; Lopez, Karen Dunn

2018-04-01

To design and test educational software to improve nursing students' diagnostic reasoning through NANDA-I-based clinical scenarios. A mixed method approach was used and included content validation by a panel of 13 experts and prototype testing by a sample of 56 students. Experts' suggestions included writing adjustments, new response options, and replacement of clinical information on the scenarios. Percentages of students' correct answers were 65.7%, 62.2%, and 60.5% for related factors, defining characteristics, and nursing diagnoses, respectively. Full development of this software shows strong potential for enhancing students' diagnostic reasoning. New graduates may be able to apply diagnostic reasoning more rapidly by exercising their diagnostic skills within this software. Desenvolver e testar um protótipo de software educativo para melhorar o raciocínio diagnóstico de estudantes de enfermagem. MÉTODOS: Uma abordagem mista foi utilizada e incluiu validação de conteúdo por 13 experts e testagem do protótipo por 56 estudantes. Sugestões dos experts incluíram ajustes na escrita, inclusão de novas opções de resposta e substituição de dados clínicos nos cenários. Os percentuais de respostas corretas dos estudantes foram 65,7%, 62,2% e 60,5% para fatores relacionados, características definidoras e diagnósticos de enfermagem respectivamente. CONCLUSÃO: O desenvolvimento deste software tem um forte potencial para melhorar o raciocínio diagnóstico de estudantes. IMPLICAÇÕES PARA A PRÁTICA EM ENFERMAGEM: Através deste software, enfermeiros poderão ser capazes de exercitar o raciocínio diagnóstico e aplicá-lo mais rapidamente. © 2016 NANDA International, Inc.

Nursing workload for cancer patients under palliative care.

PubMed

Fuly, Patrícia Dos Santos Claro; Pires, Livia Márcia Vidal; Souza, Claudia Quinto Santos de; Oliveira, Beatriz Guitton Renaud Baptista de; Padilha, Katia Grillo

2016-01-01

To verify the nursing workload required by cancer patients undergoing palliative care and possible associations between the demographic and clinical characteristics of the patients and the nursing workload. This is a quantitative, cross-sectional, prospective study developed in the Connective Bone Tissue (TOC) clinics of Unit II of the Brazilian National Cancer Institute José Alencar Gomes da Silva with patients undergoing palliative care. Analysis of 197 measures of the Nursing Activities Score (NAS) revealed a mean score of 43.09% and an association between the performance status of patients undergoing palliative care and the mean NAS scores. The results of the study point to the need to resize the team of the unit. The NAS has proven to be a useful tool in oncologic clinical units for patients undergoing palliative care. Verificar a carga de trabalho de enfermagem requerida por pacientes com câncer sob cuidados paliativos e possíveis associações entre as características demográficas e clínicas dos pacientes e a carga de trabalho de enfermagem. Trata-se de um estudo de abordagem quantitativa, transversal, prospectivo, desenvolvido na clínica de Tecido Ósseo Conectivo (TOC) da Unidade II do Instituto Nacional de Câncer José Alencar Gomes da Silva, com pacientes em cuidados paliativos. A análise de 197 medidas do Nursing Activities Score (NAS) revelou um escore médio de 43,09% e uma associação entre a performance status de pacientes em cuidados paliativos com os valores médios do NAS. Os resultados do estudo apontam para a necessidade de redimensionamento da equipe da Unidade. O NAS mostrou-se um instrumento passível de utilização em unidades clínicas oncológicas, com pacientes em cuidados paliativos.

Inclusion of Astronomy Themes in an Inovative Approach of Informal Physics Teaching for High School Students. (Spanish Title: Inclusión de Temas Astronómicos en Uma Abordaje Innovadora de la Enseñanza Informal de Física Para Estudiantes de Secumdaria.) Inclusão de Temas Astronômicos Numa Abordagem Inovadora do Ensino Informal de Física Para Estudantes do Ensino Médio

NASA Astrophysics Data System (ADS)

Tiara Mota, Aline; de Morais Bonomini, Iracema Ariel; Meloni Martins Rosado, Ricardo

2009-12-01

The current work reports on an experience on Astronomy education at the Federal University of Itajubá through an extra-curricular course offered for High School students. This initiative was motivated by the low attention paid to the Astronomy subjects at this stage of the Brazilian Formal Education, in spite that the National Curricular Parameters (PCN and PCN+, in Brazil) point out the importance of their inclusion Este artículo relata una experiencia en la enseñanza de la astronomía efectuada en la Universidad Federal de Itajubá en la forma de un curso de extensión orientado para los estudiantes del colegio secundario. Esta iniciativa surgió de constatar la poca atención dada a la Astronomía en esta etapa de la Educación formal brasileña, a pesar que los Parámetros Curriculares Nacionales (PCN y PCN+, en Brasil) destacan la importancia de su inclusión. Este artigo relata uma experiência em ensino de Astronomia realizada na Universidade Federal de Itajubá na forma de um curso de extensão voltado para alunos do Ensino Médio. Esta iniciativa surgiu da pouca atenção que se dá à Astronomia nesta etapa da Educação embora os Parâmetros Curriculares Nacionais (PCN e PCN+) apontem a importância de sua inclusão.

Use of technologies in intravenous therapy: contributions to a safer practice.

PubMed

Moreira, Ana Paula Amorim; Escudeiro, Cristina Lavoyer; Christovam, Bárbara Pompeu; Silvino, Zenith Rosa; Carvalho, Márglory Fraga de; Silva, Roberto Carlos Lyra da

2017-01-01

To identify what are the difficulties of the nursing staff in the management of technologies during intravenous therapy (IVT) and discuss the difficulties identified under the perspective of patient's safety. Descriptive study of qualitative approach with data collected by semi-structured interview and analyzed by the Alceste software. The greatest difficulty of cognitive and technical emphasis was the lack of training; and regarding administrative emphasis, the greatest difficulty was the lack of material and human resources. Infusion pumps and their proper use were highlighted as the technological resource that most contributed to patient safety. The lack of training is presented as the greatest difficulty of nursing professionals and permeates safety issues of both patient and professional when using the hard technologies in IVT. Training is essential to the development of techniques, considered nursing tools. Identificar quais são as dificuldades da equipe de Enfermagem no manejo das tecnologias durante a terapia intravenosa (TIV) e discutir as dificuldades identificadas sob a perspectiva da segurança do paciente. abordagem qualitativa, do tipo descritivo com dados coletados por entrevista semiestruturada e analisados pelo programa Alceste. A maior dificuldade de ênfase cognitiva e técnica foi a falta de treinamento; e de ênfase administrativa, foi a falta de recursos materiais e humanos. As bombas de infusão e sua utilização adequada foram destacadas como o recurso tecnológico que mais contribuiu para a segurança do paciente. A falta de treinamento é apresentada como a maior dificuldade dos profissionais de Enfermagem e permeia as questões de segurança do paciente e do profissional ao utilizar as tecnologias duras na TIV. O treinamento é imprescindível para o desenvolvimento das técnicas, consideradas como ferramentas do fazer da Enfermagem.

SIMPLIFIED LAPAROSCOPIC GASTRIC BYPASS WITH GASTROJEJUNAL LINEAR MECHANICAL ANASTOMOSIS: TECHNICAL ASPECTS.

PubMed

Palermo, Mariano; Serra, Edgardo

Gastric bypass is a restrictive and malabsorptive surgery. The restrictive part consists in the creation of a small gastric pouch. The gastrointestinal bypass serves as the malabsorptive element. To describe a simplified gastric bypass approach for morbid obese patients, showing our results, and also remarking the importance of this technique for reducing the learning curve. The patient is positioned in a split legs position and carefully strapped to the operating room table, with the surgeon between the patient's legs. Five trocars are inserted after pneumoperitoneum at the umbilicus. Dissection of the esophagogastric angle and lesser curvature is mandatory before the gastric pouch manufacturing. This pouch is done with two blue load staplers. Using a blue load linear stapler inserted only half way into the hole in the pouch is used to perform the gastrojejunal anastomosis and in order to create an anastomosis that is about 2 cm in length. A side-to-side jejunojejunostomy is done with a white load linear stapler. The last step of the gastric bypass consists in the cut of the jejunum between the two anastomosis with a white load linear stapler. Blue test is performed in order to detect leaks. From January 2012 to December 2015, 415 simplified RYGB were performed. Gender: 67% female and 33 % males. Average of BMI 44.7. Mean age was 42 years old. Mean operative time 79 min. 39 % of this sample had T2 diabetes. Regarding complications were observed, one fistula, one gastrojejunal stenosis and one obstruction due to a bezoar. The described technique is a simplified approach in which all the anastomosis are performed in the upper part of the abdomen, allowing the surgeons to be more systematized and avoiding them to make mistakes in the confection of the Roux-en-Y anastomosis. This simplified gastric bypass is a safe and reproducible technique. Bypass gástrico é cirurgia restritiva e malabsortiva. A parte restritiva consiste na criação de uma pequena bolsa gástrica. O bypass gastrointestinal serve como o elemento malabsortivo. Descrever uma abordagem de bypass gástrico simplificado para pacientes obesos mórbidos, mostrando os resultados, e também destacando a importância desta técnica para reduzir a curva de aprendizagem. O paciente é posicionado em posição de pernas abertas e cuidadosamente amarrado à mesa da sala de operação com o cirurgião entre as pernas. Cinco trocárteres são inseridos após pneumoperitônio no umbigo. Dissecção do ângulo esofagogástrico e curvatura menor é obrigatória antes da realização da bolsa gástrica. Esta bolsa é feita com dois grampeadores de carga azuis. Usando um grampeador carga linear azul inserido apenas a meio caminho para dentro do orifício na bolsa é executada a anastomose gastrojejunal a fim de criar anastomose de cerca de 2 cm de comprimento. Jejunojejunostomia laretolateral é feita com um grampeador carga linear branca. A última etapa do bypass gástrico consiste no corte do jejuno entre as duas anastomoses com um grampeador carga linear branco. Teste de azul é realizado de modo a detectar vazamentos. De janeiro de 2012 a dezembro de 2015, foram realizadas 415 RYGB simplificadas. Gênero: 67% homens e 33% mulheres. A média do IMC foi de 44,7 e a de idade 42 anos. A média de tempo operatório foi de 79 min. 39% desta amostra tinha diabete melito tipo 2. Quanto às complicações foram observadas uma fístula, uma estenose gastrojejunal e uma obstrução devido à bezoar. A técnica descrita é uma abordagem simplificada, na qual todas as anastomoses são realizadas na parte superior do abdome, permitindo aos cirurgiões serem mais sistematizados e evitando cometerem erros na confecção da anastomose em Y-de-Roux. Este bypass gástrico simplificado é técnica segura e reprodutível.

Costs of the Smoking Cessation Program in Brazil.

PubMed

Mendes, Andréa Cristina Rosa; Toscano, Cristiana Maria; Barcellos, Rosilene Marques de Souza; Ribeiro, Alvaro Luis Pereira; Ritzel, Jonas Bohn; Cunha, Valéria de Souza; Duncan, Bruce Bartholow

2016-11-10

To assess the costs of the Smoking Cessation Program in the Brazilian Unified Health System and estimate the cost of its full implementation in a Brazilian municipality. The intensive behavioral therapy and treatment for smoking cessation includes consultations, cognitive-behavioral group therapy sessions, and use of medicines. The costs of care and management of the program were estimated using micro-costing methods. The full implementation of the program in the municipality of Goiania, Goias was set as its expansion to meet the demand of all smokers motivated to quit in the municipality that would seek care at Brazilian Unified Health System. We considered direct medical and non-medical costs: human resources, medicines, consumables, general expenses, transport, travels, events, and capital costs. We included costs of federal, state, and municipal levels. The perspective of the analysis was that from the Brazilian Unified Health System. Sensitivity analysis was performed by varying parameters concerning the amount of activities and resources used. Data sources included a sample of primary care health units, municipal and state secretariats of health, and the Brazilian Ministry of Health. The costs were estimated in Brazilian Real (R$) for the year of 2010. The cost of the program in Goiania was R$429,079, with 78.0% regarding behavioral therapy and treatment of smoking. The cost per patient was R$534, and, per quitter, R$1,435. The full implementation of the program in the municipality of Goiania would generate a cost of R$20.28 million to attend 35,323 smokers. The Smoking Cessation Program has good performance in terms of cost per patient that quit smoking. In view of the burden of smoking in Brazil, the treatment for smoking cessation must be considered as a priority in allocating health resources. Analisar os custos do Programa de Tratamento do Tabagismo no Sistema Único de Saúde e estimar o custo de sua implementação plena em um município brasileiro. A abordagem intensiva e tratamento do tabagismo engloba consultas, sessões de terapia cognitivo-comportamental em grupo e uso de medicamentos. Os custos do atendimento e gerenciamento do programa foram estimados utilizando a metodologia do microcusteio. A implementação plena do programa no município de Goiânia, Goiás, foi definida como sua expansão para suprir a demanda de todos os fumantes motivados a parar de fumar no município que seriam atendidos pelo Sistema Único de Saúde. Foram considerados custos médicos e não médicos diretos: recursos humanos, medicamentos, material de consumo, despesas gerais, transporte, viagens, eventos e custos de capital. Foram incluídos custos dos níveis federal, estadual e municipal de gestão. A perspectiva da análise foi a do Sistema Único de Saúde. Análise de sensibilidade foi realizada variando parâmetros referentes à quantidade de atividades e aos recursos utilizados. As fontes de dados incluíram uma amostra de unidades de saúde da Atenção Primária, secretarias de saúde municipal e estadual e Ministério da Saúde. Os custos foram estimados em reais (R$) para o ano de 2010. O custo do programa em Goiânia foi de R$429.079, sendo 78,0% referentes à abordagem e tratamento do tabagismo. O custo por paciente foi de R$534 e, por paciente que deixou de fumar, de R$1.435. A implementação plena do programa no município de Goiânia geraria custo de R$20,28 milhões, para atender 35.323 fumantes. O Programa de Tratamento do Tabagismo tem bom desempenho em termos de custo por paciente que deixa de fumar. Tendo em vista a carga do tabagismo no Brasil, o tratamento para cessação de fumar deve ser considerado prioritário ao se programar a alocação de recursos de saúde.

Experiences in the Family Health Strategy: demands and vulnerabilities in the territory.

PubMed

Pinto, Antonio Germane Alves; Jorge, Maria Salete Bessa; Marinho, Mirna Neyara Alexandre de Sá Barreto; Vidal, Emery Ciana Figueirêdo; Aquino, Priscila de Souza; Vidal, Eglídia Carla Figueirêdo

2017-01-01

To understand the daily demands of Family Health Strategy in clinical practice of the team and social vulnerabilities of community territory. Research with qualitative approach, in a critical-reflexive perspective, held with two teams of the Family Health Strategy, in the city of Fortaleza, State of Ceará, Brazil. The participants were 22 users and 19 health professionals from the basic health network. Data from the interviews and observation were analyzed under the assumptions of critical hermeneutics. We highlight the unveiling of sufferings and daily clashes, the influence of social determinants on health and psychosocial demands, limits and possibilities of everyday clinical practice. The clinic attention must recognize the perceptions and living conditions by listening and promoting health in the community. Compreender as demandas cotidianas da Estratégia Saúde da Família na prática clínica da equipe e as vulnerabilidades sociais do território comunitário. Pesquisa com abordagem qualitativa, numa perspectiva crítico-reflexiva, realizada com duas equipes da Estratégia Saúde da Família, no município de Fortaleza, Estado do Ceará, Brasil. Os participantes foram 22 usuários e 19 profissionais de saúde da rede básica de saúde. Os dados das entrevistas e observação foram analisados sob os pressupostos da hermenêutica crítica. Evidenciam-se o desvelamento de sofrimentos e enfrentamentos cotidianos, a influência dos determinantes sociais na saúde e as demandas psicossociais, limites e possibilidades da prática clínica cotidiana. Considera-se que a atenção clínica deve reconhecer as percepções e condições de vida pela escuta e ações de promoção de saúde na comunidade.

Uma Visão do Universo Segundo um Grupo de Alunos do Ensino Médio de São Paulo

NASA Astrophysics Data System (ADS)

Elias, D. S.; Araújo, M.; Amaral, L. H.; Voelzke, M. R.; Araújo, M.

2005-08-01

A astronomia, embora seja uma ciência popular, com inúmeras descobertas de interesse público, ainda é apresentada desconsiderando-se os aspectos históricos e científicos relacionados ao seu desenvolvimento, sendo geralmente veiculada nos meios de comunicação de maneira pouco esclarecedora e não raro com imprecisões. Neste trabalho analisou-se a concepção de um grupo de estudantes de Ensino Médio sobre conceitos de astronomia, visando identificar sua visão de mundo a respeito do Universo, envolvendo idéias sobre espaço e tempo. Para issso, foi aplicado um questionário em três escolas da grande São Paulo em um espaço amostral de 270 alunos. Constatou-se que, embora o ensino de astronomia esteja previsto nos PCNEM, os resultados obtidos na pesquisa mostram que há grande deficiência no conhecimento dos temas investigados. Nesse sentido, verificou-se que apenas 20% dos alunos eram capazes de relacionar a sucessão das semanas com as fases da lua, enquanto 28% associaram as estações do ano à inclinação do eixo de rotação da Terra. Por outro lado, somente 23% dos alunos tinham noções das distâncias entre os objetos celestes próximos da Terra e 56% conseguiram relacionar o Big Bang com a origem do Universo. Finalmente, constatou-se que 37% reconheciam o ano-luz como uma unidade de distância e 60% reconheciam o Sol como sendo uma estrela. Apesar de 60% dos alunos indicarem que a escola é a principal fonte para aquisição dos conhecimentos de astronomia, conclui-se que seus conceitos nessa área ainda são inadequados, havendo necessidade de ampliação e aprimoramento da abordagem desses conteúdos nos ambientes escolares.

Virtual learning object and environment: a concept analysis.

PubMed

Salvador, Pétala Tuani Candido de Oliveira; Bezerril, Manacés Dos Santos; Mariz, Camila Maria Santos; Fernandes, Maria Isabel Domingues; Martins, José Carlos Amado; Santos, Viviane Euzébia Pereira

2017-01-01

To analyze the concept of virtual learning object and environment according to Rodgers' evolutionary perspective. Descriptive study with a mixed approach, based on the stages proposed by Rodgers in his concept analysis method. Data collection occurred in August 2015 with the search of dissertations and theses in the Bank of Theses of the Coordination for the Improvement of Higher Education Personnel. Quantitative data were analyzed based on simple descriptive statistics and the concepts through lexicographic analysis with support of the IRAMUTEQ software. The sample was made up of 161 studies. The concept of "virtual learning environment" was presented in 99 (61.5%) studies, whereas the concept of "virtual learning object" was presented in only 15 (9.3%) studies. A virtual learning environment includes several and different types of virtual learning objects in a common pedagogical context. Analisar o conceito de objeto e de ambiente virtual de aprendizagem na perspectiva evolucionária de Rodgers. Estudo descritivo, de abordagem mista, realizado a partir das etapas propostas por Rodgers em seu modelo de análise conceitual. A coleta de dados ocorreu em agosto de 2015 com a busca de dissertações e teses no Banco de Teses e Dissertações da Coordenação de Aperfeiçoamento de Pessoal de Nível Superior. Os dados quantitativos foram analisados a partir de estatística descritiva simples e os conceitos pela análise lexicográfica com suporte do IRAMUTEQ. A amostra é constituída de 161 estudos. O conceito de "ambiente virtual de aprendizagem" foi apresentado em 99 (61,5%) estudos, enquanto o de "objeto virtual de aprendizagem" em apenas 15 (9,3%). Concluiu-se que um ambiente virtual de aprendizagem reúne vários e diferentes tipos de objetos virtuais de aprendizagem em um contexto pedagógico comum.

Religiosity and spirituality as resilience strategies among long-living older adults in their daily lives.

PubMed

Reis, Luana Araújo Dos; Menezes, Tânia Maria de Oliva

2017-01-01

to investigate religiosity and spirituality as a resilience strategy for the long-living older adults in their daily lives. Qualitative research of phenomenological approach based on Martin Heidegger thoughts. Interviews were conducted with 14 older adults registered at a family health unit in the city of Jequié, BA, Brazil. The data were analyzed in the light of Being and Time. The results revealed that God occupies a central position in their lives, and the reading of the bible, praying the rosary and prayers are resilience strategies used for coping with unfavorable situations, recovery and/or maintenance of health, personal and family protection, and, above all, the experience of a satisfactory aging. Religiosity and spirituality were presented as an important resilience strategy in the existence of older adults, showing that through them it is possible to achieve well-being and cope with health and social problems. Desvelar a religiosidade e espiritualidade nas estratégias de resiliência do idoso longevo no cotidiano. Pesquisa qualitativa de abordagem fenomenológica fundamentada no pensamento de Martin Heidegger. Foram realizadas entrevistas com 14 pessoas idosas longevas cadastradas em uma unidade de saúde da família no município de Jequié, BA, Brasil. Os dados foram analisados à luz de Ser e Tempo. Desvelaram que Deus ocupa uma posição central em suas vidas, e a leitura da bíblia, a reza do terço e a oração são estratégias de resiliência utilizadas para o enfretamento de situações desfavoráveis, a recuperação e/ou manutenção da saúde, a proteção pessoal e familiar e, sobretudo, a vivência de uma velhice satisfatória. A religiosidade e espiritualidade foram desveladas como importante estratégia de resiliência no existir da pessoa idosa longeva, sinalizando que, por meio dela, é possível alcançar o bem-estar e enfrentar problemas de saúde e sociais.

Occupational Burnout Syndrome in the nursing context: an integrative literature review.

PubMed

Medeiros-Costa, Mateus Estevam; Maciel, Regina Heloísa; Rêgo, Denise Pereira do; Lima, Lucimar Lucas de; Silva, Maria Eliziane Pinto da; Freitas, Julyana Gomes

2017-07-20

To characterize the scientific production on Burnout Syndrome in the Nursingcontext, systematizing the location where the studies were carried out, the related constructs, the employed methods and their main results. An integrative review of the literature with a bibliometric approach of articles published in Portuguese, Spanish and English between 2005 and 2016. 106 articles wereincluded. Mostinvolvedprevalence, and were descriptive, quantitative studies performed in hospitals.The Southeastern and Southern regions of Brazil had the largest number of publications, and stress was the construct most related to burnout.Most of the studies used the Maslach Burnout Inventory to investigate the presence of the syndrome. New case-control and cohort studies should be carried out.Qualitative-exploratory studies are necessary to better understand Burnout Syndrome among nursing professionals usingfocus groups or interviews, as well as comparative causal studies, with the purpose of exploring the syndrome'smanifestations. Caracterizar a produção científica sobre a Síndrome do Esgotamento Profissionalno contexto da enfermagem, sistematizando os locais onde as pesquisas foram realizadas, os construtos relacionados, os métodos empregados e seus principais resultados. Revisão integrativa da literatura, com abordagem bibliométrica, em artigos na língua portuguesa, espanhola e inglesa publicados entre 2005 e 2016. Foram selecionados 106 artigos.A maioria estudos de prevalência, descritivos, quantitativos e realizados em hospitais. Nas regiões Sudeste e Sul do Brasil encontram-se o maior número de publicações, sendo o estresse o construto mais relacionado com o esgotamento profissional. A maior parte dos estudos utilizou o Maslach Burnout Inventory como meio de averiguação da presença da síndrome. Novos estudos de caso controle e coorte devem ser realizados. Pesquisas de cunho qualitativo-exploratório são necessárias para poder compreender melhor a Síndrome do Esgotamento Profissionalentre os profissionais de enfermagem com grupos focais ou entrevistas, como também pesquisas causais comparativas, com o intuito de explorar as manifestações da síndrome.

Cosmoeducação: uma proposta para o ensino de astronomia

NASA Astrophysics Data System (ADS)

Medeiros, L. A. L.; Jafelice, L. C.

2003-08-01

Entende-se por cosmoeducação o desenvolvimento vivencial da unidade homem-cosmo. Este conceito é norteado pela psicologia transpessoal, que estuda o ser humano em sua totalidade, onde suas relações ecológicas e cósmicas são de grande importância. Constata-se uma necessidade latente no ser humano moderno em resgatar uma relação holística com o Universo. Neste trabalho exploramos meios de cultivar a consciência de que o ser humano constitui parte integrante do cosmo e se relaciona com este com o objetivo de promover em si uma percepção ambiental mais ampla. Nossa hipótese de trabalho inicial foi que o ensino de conteúdos básicos em astronomia realizado através de uma abordagem holística, que incorpore práticas vivenciais correlacionadas àqueles conteúdos, pode despertar no indivíduo sua identidade cósmica. O método que utilizamos é o fenomenológico e o universo desta pesquisa é um grupo de estudantes da disciplina de Astronomia (Curso de Licenciatura em Geografia/UFRN), onde realizamos observação participante, entrevistas, depoimentos e as práticas vivenciais mencionadas. Neste caso estamos desenvolvendo e adaptando exercícios de algumas técnicas terapêuticas de psicologia transpessoal, que um de nós (LALM) tem aplicado no contexto clínico, para trabalhar aspectos cognitivos envolvidos naquele processo de conscientização cósmica. Resultados parciais claramente referendam a hipótese inicial. Um resultado a destacar é fruto de uma dinâmica de representação corporal interiorizada do eclipse lunar, envolvendo um pequeno grupo daqueles estudantes, na qual conteúdos míticos afloraram de maneira espontânea e contundente para todos, sugerindo ressonância, ou pelo menos isomorfismo, entre o macro e o microcosmo. Este e outros resultados são discutidos em detalhe neste trabalho. (PPGECNM/UFRN; PRONEX/FINEP; NUPA/USP; Temáticos/FAPESP).

Use of alcohol and other drugs among male university students and its meanings.

PubMed

Dázio, Eliza Maria Rezende; Zago, Márcia Maria Fontão; Fava, Silvana Maria Coelho Leite

2016-01-01

To understand the meanings that male university students assign to the condition of users of alcohol and other drugs. An exploratory study using a qualitative approach, with inductive analysis of the content of semi-structured interviews applied to 20 male university students from a public university in the southeast region of Brazil, grounded on the theoretical-methodological referential of interpretive anthropology and ethnographic method. Data were construed using content inductive analysis for two topics: use of alcohol and/or drugs as an outlet; and use of alcohol and/or other drugs: an alternative for belonging and identity. Male university students share the rules of their sociocultural environment that values the use of alcohol and/or other drugs as a way of dealing with the demands and stress ensuing from the everyday university life, and to build identity and belong to this social context, reinforcing the influence of culture. Compreender os significados atribuídos pelos universitários do sexo masculino à condição de usuários de álcool e outras drogas. Estudo exploratório de abordagem qualitativa, com análise de conteúdo indutiva de entrevistas semiestruturadas de 20 universitários do sexo masculino, matriculados em uma universidade pública da região sudeste do Brasil, fundamentado no referencial teórico-metodológico da Antropologia Interpretativa e do método etnográfico. Os dados foram interpretados com a análise de conteúdo indutiva em dois temas: O uso do álcool e/ou drogas como válvula de escape; O uso do álcool e/ou outras drogas: alternativa para o pertencimento e para a identidade. Os universitários do sexo masculino compartilham normas de seu meio sociocultural, que valorizam o uso de álcool e/ou outras drogas, como uma forma de lidar com as exigências e o estresse da vida universitária, criar uma identidade e ter pertencimento neste contexto social, reforçando a influência da cultura.

Promoting oral care in the preschool child: effects of a playful learning intervention.

PubMed

Sigaud, Cecília Helena de Siqueira; Santos, Bruna Rodrigues Dos; Costa, Priscila; Toriyama, Aurea Tamami Minagawa

2017-01-01

To compare the number of appropriate behaviors for tooth brushing before and after a playful learning intervention with preschool children. A quasi-experimental, quantitative, before and after study design was conducted in an early childhood educational institution, with children between three and five years of age. The intervention consisted of three meetings with educational activities about tooth brushing, whose outcome was evaluated by means of observation of ten behaviors suitable for tooth brushing. Forty-four children participated in the study. The mean of adequate behaviors was 4.4 before the intervention, and 8.5 after the intervention. A significant increase in the adoption of appropriate behaviors for tooth brushing (p <0.01) was identified. Nurses can enhance oral health promotion actions with preschoolers in preschool institution using playful learning interventions. Comparar o número de comportamentos adequados para a escovação de dentes antes e após uma intervenção educativa lúdica com pré-escolares. Estudo quase-experimental, do tipo antes-depois, com abordagem quantitativa e conduzido em instituição de educação infantil com crianças entre três e cinco anos de idade. A intervenção consistiu em três encontros com atividades educativas lúdicas sobre escovação de dentes, cujo efeito foi avaliado por meio da observação de dez comportamentos adequados para a escovação dos dentes. Participaram do estudo 44 crianças. A média de comportamentos adequados foi de 4,4 antes da intervenção e 8,5 após a mesma. Houve um aumento significativo na adoção de comportamentos adequados para a escovação de dentes (p < 0,01). Por meio de intervenções educativas lúdicas, recomenda-se que os enfermeiros potencializem as ações de promoção da saúde bucal com pré-escolares em instituições de educação infantil.

Falls in long-term care institutions for elderly people: protocol validation.

PubMed

Baixinho, Cristina Rosa Soares Lavareda; Dixe, Maria Dos Anjos Coelho Rodrigues; Henriques, Maria Adriana Pereira

2017-01-01

To validate the content of a fall management risk protocol in long-term institutions for elderly people. Methodological, quanti-qualitative study using the Delphi technique. The tool, based on the literature, was sent electronically to obtain consensus among the 14 experts that meet the defined inclusion criteria. The 27 indicators of the protocol are organized in three dimensions: prepare for the institutionalization (IRA=.88); manage the risk of falls throughout the institutionalization (IRA=.9); and lead the communication and formation (IRA=1), with a CVI=.91. Two rounds were performed to get a consensus superior to 80% in every item. The values obtained in the reliability test (>0.8) show that the protocol can be used to meet the intended goal. The next step is the clinic validation of the protocol with residents of long-term care institutions for elderly people. Validar o conteúdo de um protocolo para a gestão do risco de queda em Instituições de Longa Permanência para Idosos. Estudo metodológico, de abordagem quantiqualitativa, utilizando a técnica de Delphi. O instrumento, construído com base na literatura, foi enviado por via electrónica, para obter consenso entre os 14 peritos que respeitam os critérios de inclusão definidos. Os 27 indicadores do protocolo estão organizados em três dimensões: Preparar a Institucionalização (IRA=,88); Gerir o Risco de Queda ao longo da Institucionalização (IRA=,9) e Liderar a comunicação e formação (IRA=1), com um CVI=,91. Foram efetuadas duas rodadas para se obter consenso superior a 80% em todos os itens. Os valores obtidos no teste de fidedignidade (>0,8) atestam que o protocolo pode ser utilizado para atingir o fim que se pretende. A próxima etapa é a validação clínica do protocolo com idosos residentes em Instituições de Longa Permanência para Idosos.

Um enfoque antropológico para o ensino de astronomia no nível médio

NASA Astrophysics Data System (ADS)

Costa, G. B.; Jafelice, L. C.

2003-08-01

Há uma enorme carência de materiais didático-pedagógicos em astronomia para professores do ensino médio, sobretudo materiais que explorem também aspectos humanísticos. A origem do Universo é um bom exemplo desta constatação central. Embora tal origem teve explicações culturais diversas, os professores não têm informações sobre isso e muito menos material que trabalhe diferentes visões de mundo e treinamento que os capacite a abordá-las devidamente. Conseqüentemente o ensino de astronomia costuma ser tecnicista e dissociado do aspecto humano que alimenta o grande interesse e curiosidade que esses temas despertam. Aqui apresentamos propostas visando contribuir para reverter esse quadro e trabalhamos distintas visões de Universo: espontâneas, autóctones e científicas. Desenvolvemos práticas, materiais instrucionais e textos para viabilizar a adoção de um enfoque antropológico para o ensino de astronomia no nível médio, no qual as culturas humanística e científica sejam integradas de uma maneira contextualizada e eficaz para aquele ensino. Estas propostas foram aplicadas em um curso de treinamento para professores da rede pública de diferentes disciplinas. A receptividade dos professores à abordagem proposta e os resultados alcançados foram muito estimulantes. Destes, destacamos: produção de roteiros de atividades; desenvolvimento de práticas didático-pedagógicas específicas (e.g., encenação de mitos; dança primordial guarani; "criação" de constelações e interpretações pluriculturais; etc.); e sugestões concretas para a efetiva realização de um ensino interdisciplinar contextualizado, onde questões cosmogônicas servem de mote para iniciar tal ensino. Discutimos estes resultados e como o enfoque adotado pode instrumentalizar os professores para leituras de mundo que incluem naturalmente aspectos culturais, sociais e históricos associados aos temas estudados. (PPGECNM/UFRN; PRONEX/FINEP; NUPA/USP; Temáticos/FAPESP)

Assessment of the usability of a digital learning technology prototype for monitoring intracranial pressure.

PubMed

Carvalho, Lilian Regina de; Évora, Yolanda Dora Martinez; Zem-Mascarenhas, Silvia Helena

2016-08-29

to assess the usability of a digital learning technology prototype as a new method for minimally invasive monitoring of intracranial pressure. descriptive study using a quantitative approach on assessing the usability of a prototype based on Nielsen's ten heuristics. Four experts in the area of Human-Computer interaction participated in the study. the evaluation delivered eight violated heuristics and 31 usability problems in the 32 screens of the prototype. the suggestions of the evaluators were critical for developing an intuitive, user-friendly interface and will be included in the final version of the digital learning technology. avaliar a usabilidade de um protótipo educacional digital sobre um novo método para monitoração da pressão intracraniana de forma minimamente invasivo para enfermeiros e médicos. estudo descritivo com abordagem quantitativa sobre a avaliação de usabilidade de um protótipo com base nas dez Heurísticas de Nielsen. Participaram quatro especialistas da área de Interação Humano Computador. a avaliação resultou em oito heurísticas violadas e 31 problemas de usabilidade nas 32 telas do protótipo. as sugestões dos avaliadores foram cruciais para o desenvolvimento de uma interface amigável e intuitiva e serão consideradas na versão final da tecnologia educacional digital. evaluar la usabilidad de un prototipo educacional digital sobre un nuevo método para monitorización de la presión intracraneal, de manera mínimamente invasiva. estudio descriptivo con abordaje cuantitativo sobre la evaluación de usabilidad de un prototipo con base en las diez reglas Heurísticas de Nielsen. Participaron cuatro especialistas del área de Interacción Humana Computador. la evaluación resultó en ocho reglas heurísticas violadas y 31 problemas de usabilidad en las 32 pantallas del prototipo. las sugestiones de los evaluadores fueron cruciales para el desarrollo de una interfaz amigable e intuitiva y éstas serán consideradas en la versión final de la tecnología educacional digital.

Care management: agreement between nursing prescriptions and patients' care needs.

PubMed

Faeda, Marília Silveira; Perroca, Márcia Galan

2016-08-08

analyze agreement between nursing prescriptions recorded in medical files and patients' care needs; investigate the correlation between the nurses' professional background and agreement of prescriptions. descriptive study with quantitative and documentary approach conducted in the medical clinic, surgical, and specialized units of a university hospital in the interior of São Paulo, Brazil. The new validated version of a Patient Classification Instrument was used and 380 nursing prescriptions written at the times of hospital admission and discharge were assessed. 75% of the nursing prescriptions items were compatible with the patients' care needs. Only low correlation between nursing prescription agreement and professional background was found. the nursing prescriptions did not fully meet the care needs of patients. The care context and work process should be analyzed to enable more effective prescriptions, while strategies to assess the care needs of patients are recommended. analisar a concordância entre prescrições de enfermagem, registradas nos prontuários, e as necessidades de cuidados dos pacientes; investigar a correlação entre o perfil profissional dos enfermeiros e a concordância das prescrições. estudo descritivo com abordagem quantitativa e documental, realizado em unidades de clínica médica, cirúrgica e especializada de um hospital de ensino, no interior do Estado de São Paulo. Foi aplicada a nova versão validada do Instrumento de Classificação de Pacientes e, posteriormente, investigadas 380 prescrições de enfermagem no momento da admissão e alta hospitalar. foi identificado que 75% dos itens das prescrições de enfermagem estavam compatíveis com as necessidades cuidativas dos pacientes. Encontrou-se baixa correlação entre a concordância da prescrição de enfermagem e o perfil profissional. as prescrições de enfermagem não estão sendo realizadas, em sua totalidade, em consonância com as necessidades dos pacientes. Para possibilitar prescrições mais efetivas, recomenda-se análise do contexto assistencial e processo de trabalho e o uso de estratégias avaliativas das necessida¬des de cuidados dos pacientes. analizar la concordancia entre prescripciones de enfermería, registradas en las fichas médicas, y las necesidades de cuidados de los pacientes; investigar la correlación entre el perfil profesional de los enfermeros y la concordancia de las prescripciones. estudio descriptivo con abordaje cuantitativo y documental, realizado en unidades de clínica médica, quirúrgica y especializada de un hospital de enseñanza, en el interior del Estado de Sao Paulo. Fue aplicada la nueva versión validada del Instrumento de Clasificación de Pacientes y, posteriormente, investigadas 380 prescripciones de enfermería en el momento de la admisión y alta hospitalaria. fue identificado que 75% de los ítems de las prescripciones de enfermería eran compatibles con las necesidades de cuidados de los pacientes. Se encontró baja correlación entre la concordancia de la prescripción de enfermería y el perfil profesional. las prescripciones de enfermería no están siendo realizadas, en su totalidad, en consonancia con las necesidades de los pacientes. Para posibilitar prescripciones más efectivas, se recomienda analizar el contexto asistencial y el proceso de trabajo y el uso de estrategias de evaluación de las necesidades de cuidados de los pacientes.

Ensino de astronomia e óptica: é possível fazê-lo de forma contextualizada no nível médio?

NASA Astrophysics Data System (ADS)

Sobrinho, A. A.; Jafelice, L. C.

2003-08-01

Discutimos nossa participação em um curso de treinamento para professores de diversas disciplinas do ensino médio. Nossa preocupação básica foi desenvolver instrumentos educacionais adequados para levar à sala de aula, nesse nível de ensino, de forma contextualizada, questionamentos freqüentes dos alunos sobre astronomia e sua relação com tecnologia e sociedade. Encaminhamos questões como: a evolução da astronomia, suas relações com outros ramos do conhecimento humano e conseqüentes aplicações; avanços na tecnologia dos instrumentos ópticos versus a importância da observação do céu a olho nu; a relação entre olho humano, luneta e telescópio; e desenvolvimento da tecnologia espacial e sua influência em nosso cotidiano. Objetivamos com isto fazer um resgate histórico e pedagógico das aplicações e observações do céu no cenário escolar, destacando a relação entre eventos astronômicos, olho humano, instrumentos mediadores e suas contextualizações históricas e sociais. Produtos desta abordagem foram o desenvolvimento e a adaptação de práticas e materiais instrucionais diversos (e.g., "espelhos" de isopor e "raios luminosos" de bolinhas de gude; montagens envolvendo velas, lasers, lentes e espelhos; desmonte e análise de peças de um telescópio; etc.). Além disto, como outro resultado deste trabalho, elaboramos textos sobre história da astronomia e da óptica para atividades em classe. Com estas ações visamos facilitar a concretização de conceitos físicos envolvidos, exemplificar um ensino contextualizado e interdisciplinar motivado por temas astronômicos e favorecer que práticas e discussões feitas com os treinandos possam ser transpostas para a sala de aula. A reação dos professores às práticas propostas foi bastante positiva. Todos esses aspectos são discutidos em detalhe neste trabalho. (PPGECNM/UFRN; PRONEX/FINEP; NUPA/USP; Temáticos/FAPESP)

Using the Bologna Score to assess normal delivery healthcare.

PubMed

Carvalho, Isaiane da Silva; Brito, Rosineide Santana de

2016-01-01

Describing the obstetric care provided in public maternity hospitals during normal labour using the Bologna Score in the city of Natal, Northeastern Brazil. A quantitative cross-sectional study conducted with 314 puerperal women. Data collection was carried out consecutively during the months of March to July 2014. Prenatal care was provided to 95.9% of the mothers, beginning around the 1st trimester of pregnancy (72.3%) and having seven or more consultations (51%). Spontaneous vaginal delivery was planned for 88.2% women. All laboring women were assisted by a health professional, mostly by a physician (80.6%), and none of them obtained 5 points on the Bologna Score due to the small percentage of births in non-supine position (0.3%) and absence of a partogram (2.2%). A higher number of episiotomies were observed among primiparous women (75.5%). The score obtained using the Bologna Index was low. Thus, it is necessary to improve and readjust the existing obstetrical model. Descrever a assistência obstétrica prestada em maternidades públicas municipais durante o parto normal na cidade de Natal, Nordeste do Brasil, com uso do Índice de Bologna. Estudo transversal com abordagem quantitativa, desenvolvido com 314 puérperas. A coleta de dados processou-se de forma consecutiva durante os meses de março a julho de 2014. A assistência pré-natal foi prestada a 95,9% das puérperas, com início em torno do 1º trimestre de gestação (72,3%) e realização de sete ou mais consultas (51%). O parto vaginal espontâneo foi planejado para 88,2% mulheres. Todas as parturientes foram assistidas por um profissional de saúde, especialmente pelo médico (80,6%) e nenhuma obteve 5 pontos no Índice de Bologna em virtude dos baixos percentuais de partos em posição não supina (0,3%) e ausência do partograma (2,2%). Houve maior número de episiotomias em primíparas (75,5%). A pontuação obtida por meio do Índice de Bologna foi baixa. Desse modo, é preciso melhorar e readequar o modelo obstétrico vigente.

Relational technologies as instruments of care in the Family Health Strategy.

PubMed

Abreu, Tatiana Fernandes Kerches de; Amendola, Fernanda; Trovo, Monica Martins

2017-01-01

This article aims to identify the relational technologies used by Family Health Strategy nurses in their daily work when treating patients. Descriptive and cross-sectional study with qualitative approach; conducted between May and July 2015, in three Basic Health Units of the Southern Region of the Municipality of São Paulo, with 19 nurses of the Family Health Strategy. Data were collected through a semi-structured interview, and the speeches were fully transcribed and analyzed according to the technique of content analysis. From the speeches of the participants, three categories emerged, showing the unawareness of the concept, but the valorization of its use; which are the relational technologies used by the participating nurses (communication, listening, empathy and welcoming reception), as well as the report of barriers to the use of relational technologies. Although the nurses value the use of relational technologies, the participants denoted unawareness of the nomenclature and its associated concepts, suggesting superficiality in the understanding and use of these instruments in the context of care in the Family Health Strategy. Identificar as tecnologias relacionais utilizadas por enfermeiros de Estratégia Saúde da Família em seu cotidiano de trabalho no atendimento aos usuários. Estudo descritivo, transversal, com abordagem qualitativa; desenvolvido entre maio e julho de 2015, em três Unidades Básicas de Saúde da Região Sul do Município de São Paulo, com 19 enfermeiros da Estratégia Saúde da Família. Os dados foram coletados por meio de entrevista semiestruturada, e os discursos foram transcritos na íntegra, analisados segundo a técnica de análise de conteúdo. Das falas dos participantes, surgiram três categorias, que evidenciam o desconhecimento do conceito, mas valorização do uso; quais são as tecnologias relacionais utilizadas pelos enfermeiros participantes (comunicação, escuta, empatia e acolhimento), além do relato de barreiras para a utilização de tecnologias relacionais. Embora valorizem a utilização de tecnologias relacionais, os participantes denotaram desconhecer a nomenclatura e os conceitos associados, sugerindo superficialidade na compreensão e utilização dessas ferramentas no contexto de atendimento na Estratégia Saúde da Família.

Microstructure design of titanate-based electroceramics =

NASA Astrophysics Data System (ADS)

Amaral, Luis Miguel de Almeida

Electrocerâmicos sao uma classe de materiais avancados com propriedades electricas valiosas para aplicacoes. Estas propriedades sao geralmente muito dependentes da microestrutura dos materiais. Portanto, o objectivo geral deste trabalho e investigar o desenho da resposta dielectrica de filmes espessos obtidos por Deposicao Electroforetica (EPD) e cerâmicos monoliticos, atraves do controlo da evolucao da microestrutura durante a sinterizacao de electrocerâmicos a base de titanatos. Aplicacoes sem fios na industria microelectronica e de comunicacoes, em rapido crescimento, tornaram-se um importante mercado para os fabricantes de semicondutores. Devido a constante necessidade de miniaturizacao, reducao de custos e maior funcionalidade e integracao, a tecnologia de filmes espessos esta a tornar-se uma abordagem de processamento de materiais funcionais cada vez mais importante. Uma tecnica adequada neste contexto e EPD. Os filmes espessos resultantes necessitam de um passo subsequente de sinterizacao que e afectada pelo substrato subjacente, tendo este um forte efeito sobre a evolucao da microestrutura. Relacionado com a miniaturizacao e a discriminacao do sinal, materiais dielectricos usados como componentes operando a frequencias das microondas em aplicacoes na industria microelectronica de comunicacoes devem apresentar baixas perdas dielectricas e elevadas permitividade dielectrica e estabilidade com a temperatura. Materiais do sistema BaO-Ln2O3- TiO2 (BLnT: Ln = La ou Nd), como BaLa4Ti4O15 (BLT) e Ba4.5Nd9Ti18O54 (BNT), cumprem esses requisitos e sao interessantes para aplicacoes, por exemplo, em estacoes de base para comunicacoes moveis ou em ressonadores para telefones moveis, onde a miniaturizacao dos dispositivos e muito importante. Por sua vez, o titanato de estroncio (SrTiO3, STO) e um ferroelectrico incipiente com constante dielectrica elevada e baixas perdas, que encontra aplicacao em, por exemplo, condensadores de camada interna, tirando partido de fronteiras de grao altamente resistivas. A dependencia da permitividade dielectrica do campo electrico aplicado torna este material muito interessante para aplicacoes em dispositivos de microondas sintonizaveis. Materiais a base de STO sao tambem interessantes para aplicacoes termoelectricas, que podem contribuir para a reducao da actual dependencia de combustiveis fosseis por meio da geracao de energia a partir de calor desaproveitado. No entanto, as mesmas fronteiras de grao resistivas sao um obstaculo relativamente a eficiencia do STO para aplicacoes termoelectricas. (Abstract shortened by ProQuest.).

Evaluation of the performance of actions and outcomes in primary health care.

PubMed

Miclos, Paula Vitali; Calvo, Maria Cristina Marino; Colussi, Claudia Flemming

2017-01-01

The objective of this study has been to evaluate the performance of the primary care of Brazilian municipalities in relation to health actions and outcomes. This is an evaluative, cross-sectional research, with a quantitative approach, aimed at the identification of the efficiency frontier of the primary care in health actions and outcomes in Brazilian municipalities. Secondary data have been collected from the Programa Nacional de Melhoria do Acesso e da Qualidade da Atenção Básica (National Program for Improving Access and Quality of Primary Care) and the Department of Informatics of the Brazilian Unified Health System, in 2012. The data envelopment analysis tool has been used for variable returns to scale with product orientation. Municipalities have been analyzed by population size, and small municipalities have presented a high percentage of inefficiency for both models. The analysis of efficiency has indicated the existence of a higher percentage of effective municipalities in the model of health actions than in the model of health outcomes. Avaliar o desempenho da atenção básica dos municípios brasileiros quanto a ações e resultados em saúde. Pesquisa avaliativa, transversal, com abordagem quantitativa, para identificar a fronteira de eficiência da atenção básica em ações e resultados em saúde nos municípios brasileiros. Foi realizada coleta de dados secundários a partir do Programa Nacional de Melhoria do Acesso e da qualidade da Atenção Básica e do Departamento de Informática do Sistema Único de Saúde, no ano de 2012. Utilizou-se a ferramenta análise envoltória de dados para retornos variáveis de escala com orientação para produto. Os municípios foram analisados por porte populacional e verificou-se que para ambos os modelos, os municípios de pequeno porte apresentaram alto percentual de ineficiência. A análise da eficiência indicou a existência de um percentual maior de municípios eficientes no modelo de ações em saúde do que no modelo de resultados em saúde.

Geriatric care: ways and means of providing comfort.

PubMed

Ribeiro, Patricia Cruz Pontifice Sousa Valente; Marques, Rita Margarida Dourado; Ribeiro, Marta Pontifice

2017-01-01

To know the ways and means of comfort perceived by the older adults hospitalized in a medical service. Ethnographic study with a qualitative approach. We conducted semi-structured interviews with 22 older adults and participant observation of care situations. The ways and means of providing comfort are centered on strategies for promoting care mobilized by nurses and recognized by patients(clarifying/informing, positive interaction/communication, music therapy, touch, smile, unconditional presence, empathy/proximity relationship, integrating the older adult or the family as partner in the care, relief of discomfort through massage/mobilization/therapy) and on particular moments of comfort (the first contact, the moment of personal hygiene, and the visit of the family), which constitute the foundation of care/comfort. Geriatric care is built on the relationship that is established and complete with meaning, and is based on the meeting/interaction between the actors under the influence of the context in which they are inserted. The different ways and means of providing comfort aim to facilitate/increase care, relieve discomfort and/or invest in potential comfort. Conhecer os modos e formas de confortar percecionadas pelos idosos hospitalizados num serviço de medicina. Estudo etnográfico com abordagem qualitativa. Realizamos entrevistas semiestruturadas com 22 doentes idosos e observação participante nas situações de cuidados. Os modos e formas de confortar centram-se em estratégias promotoras de conforto mobilizadas pelo enfermeiro e reconhecidas pelos doentes (informação/esclarecimento, interação/comunicação positiva, toque, sorriso, presença incondicional, integração do idoso/família nos cuidados e o alívio de desconfortos através da massagem/mobilização/terapêutica) e em momentos particulares de conforto (contato inaugural, visita da família., cuidados de higiene e arranjo pessoal), que se constituem como alicerces do cuidar/cuidado confortador. O cuidado geriátrico edifica-se na relação que se desenvolve, atribuída de sentido, e assenta-se num encontro/interação entre os atores sob influência do contexto em que está inserido. Os diferentes modos e formas de confortar objetivam facilitar/aumentar o conforto, aliviar o desconforto e/ou investir no conforto potencial.

Abundância química de simbióticas na direção do bojo galáctico

NASA Astrophysics Data System (ADS)

Luna, G. J. M.; Costa, R. D. D.

2003-08-01

O estudo da distribuição de metalicidades de gigantes K no Bojo indica um largo intervalo com valores entre 0.1 a 10 vezes o valor solar. As razões elementais Ca/Fe, Si/Fe, Mg/Fe são típicas de estrelas do halo, apontando para um processo rápido de enriquecimento, via estrelas masssivas (SN's tipo II). No entanto, este cenário não combina com os resultados derivados de nebulosas planetárias do bojo tais como os de Ratag et al. (1992, A&A,255,270), Cuisinier et al.(2000, A&A,353, 543), Escudero e Costa (2001, A&A,380, 300),que obtêm abundâncias análogas às do disco. Neste cenário, o estudo de estrelas simbióticas possibilita uma abordagem particularmente apropriada para o problema das abundâncias químicas de estrelas de massa intermediária em estágios avançados da evoluçao estelar. Apresentamos aqui os resultados da determinacão das abundâncias do grupo do CNO numa extensa amostra de simbióticas do bojo. Aliás, com a disponibilidade de espectros no visível determinamos também abundâncias de Ar, Ne, S e He, fundamentais para analisar os processos de enriquecimento químico ocorridos ao longo da evolução estelar, bem como a evolução química do meio interestelar. Com os espectros UV do satelite IUE obtivemos abundâncias de C, necessárias no estudo da evolução dos sistemas. As relaçoes C/N-O/N mostram que o material nebular é produto do vento da componente gigante e não dos eventos de nova que às vezes acontecem nestes sistemas, como foi mostrado por Nussbaumer et al (1988,A&A,198,179). As abundâncias de Ar, S, Ne e O são compativeis com resultados de fontes no disco e bojo, seguindo o gradiente proposto por muitos autores na literatura a partir de diferentes objetos como cefeidas, nebulosas planetárias e anãs G. (CAPES,FAPESP,CNPq)

Understanding the curriculum the light of training guiding health in Brazil.

PubMed

Moraes, Bibiana Arantes; Costa, Nilce Maria da Silva

2016-06-01

To analyze Pedagogical Projects Courses (PPCs) from the healthcare field in light of the National Curriculum Standards (NCS) policies on healthcare training. Exploratory descriptive study of qualitative approach, in which were carried out analyzes of PPPs of Nursing, Pharmacy, Medicine, Nutrition and Dentistry of a federal university in the Midwest region of Brazil. As technical analysis of documentary sources, adopted the content analysis in the thematic mode. The analysis of PPC showed the general aspects of PPC as the course features the historical percursso and construction, professional skills and competences required for professional performance and the guiding principles of formation characterized by technical, professional practice, articulation theory/ practice, interdisciplinarity and ethical / social training. PPC presented is consistent with the proposals set out in DCN and carry training policies in health in Brazil, providing adequate training for health professionals, the demands of the population and the National Health System. Analisar os Projetos Pedagógicos de Cursos (PPC) da área da saúde à luz das Diretrizes Curriculares Nacionais (DCN) e das políticas indutoras de formação em saúde do Brasil. Pesquisa descritiva exploratória de abordagem qualitativa, na qual foram realizadas análises dos PPC dos cursos de Enfermagem, Farmácia, Medicina, Nutrição e Odontologia de uma instituição federal de ensino superior da região Centro-Oeste do Brasil. Como técnica de análises das fontes documentais, adotou-se a análise de conteúdo, na modalidade temática. As análises dos PPC evidenciaram os aspectos gerais dos PPC como as características do curso, o percursso histórico e sua construção, habilidades e competências profissionais requeridas para o desempenho profissional e os princípios norteadores da formação caracterizados pela técnica, prática profissional, articulação teoria/prática, interdisciplinaridade e formação ética/social. Os PPC apresentaram-se condizentes com as propostas previstas nas DCN e com as políticas indutoras de formação em saúde do Brasil, proporcionando a formação adequada para os profissionais de saúde, as demandas da população e do Sistema Único de Saúde.

On The Black Sea Surozhian

NASA Astrophysics Data System (ADS)

Caraivan, Glicherie; Corneliu, Cerchia

2016-04-01

Some Black Sea researchers still support the idea of no other connection to the Mediterranean Sea between LGM and Karangatian Stage (Riss - Wurm). We try to clarify the source of these disagreements. C14 AMS age data (HERAS Project) made on undisturbed samples from a new Mamaia drilling hole where compared with the classical Black Sea stratigraphic schemes. A first transgressive event (Zone D) is found between 38.00 - 20.20 m depth. Zone D4 shows a fairly rapid rise of sea level, about 10 m below the present one indicating an inner shelf marine polyhaline environment. AMS age data show 14C ages between 53690 - 47359 y (MIS 1), corresponding to the "Surozhian Beds" of Popov. The "beach rock" from Zone E marks the decrease of the sea level after the maximum reached in Zone D4. Zone E mollusc shells AMS data, indicate 14C ages of 48724 - 44604 y, suggesting a long-time reworked material from the previous D4 zone sediments, and represents the beginning of the "regressive Tarkankutian" sequence.The Last Glacial Maximum (LGM) led to the retreat of the sea level down to about 100 m below the current one (27-17 ky BP), followed by an retreat of the shoreline to the present position. At the beginning of the Holocene - MIS 1 (8408-8132 cal. y BP), Black Sea brackish water level grew rapidly, up to -14 m below the present one (Zone F: 22, 57-20, 20 m). Zone F deposits could be correlated with the Bugazian strata. Then, a continuous rising of the Black Sea level is recorded up to a maximum of -2 m under the present one, about 6789 - 7063 cal. y BP, when a transgressive spurt ("Neolithic transgression") may have taken place. After that, given a weak Danubian sedimentary input, coastal erosion intensified. The coarse sandy sediments were reworked and pushed over the previous peat deposits, and suggest a classical "sedimentary regression", not a sea-level decrease. During the last 1.5 ky, sea level has risen towards the current one. Previous C14 dates from "Karangatian stratotypes", show ages between 27390 - 42120 y BP. Our AMS C14 data on Surozhian mollusk indicate ages between 47359 - 53690 cal. y BP. We argue that "Surozhian" is likely the classic "Karangatian" defined by Nevesskaia that does not correspond to the Riss-Wurm, but to the Middle Wurm instead. The generally accepted "Karangatian", placed in the Riss-Wurm interval is much older. Similarly, the Surozhian (transgressive) cannot be Tarhankutian (regressive). References Caraivan, G., 2010. Studiul sedimentologic al depozitelor de plajǎ si de selful intern al M\\varii Negre între Portița si Tuzla. [Sedimentological Study of Beach and Inner Shelf Romanian Black Sea Deposits]. Ex Ponto, Constanta. (In Romanian) Caraivan, G., Fulga, C., Opreanu, P., 2012. Upper Quaternary evolution of the Mamaia Lake area (Romanian Black Sea shore). Quaternary International 261: 14-20. Caraivan, G., Opreanu, P., Voinea, V., Pojar, I., Sava, T., Giosan, L. „Holocene landscape changes and human communities' migration in the western part of the Black Sea (Mamaia Lake area)", In: IGCP 610 Proceedings of the Third Plenary Conference, Astrakhan, Russia, 22-30 September 2015. Giosan L.et al, 2012. Early Anthropogenic Transformation of the Danube-Black Sea System. Sci Rep. 2012; 2:582 Nevesskaia, L.A. 1965. Pozdrecetverticinîe dvustvorcestîe molluski Cernogo Moria, ih sistematica i ekologhia, Trudî Pal. Inst., 105, Moskva. Shcherbakov, F.A., Koreneva, E.V., and Zabelina, E.K., 1977. Stratigrafiia pozdnechetvertichnykh otlozhenii Chernogo moria [Stratigraphy of the Late Quaternary deposits in the Black Sea]. In Pozdnechetvertichnaia istoriia i sedimentogenez okrainikh i vnutrennikh morei [Late-Quaternary History and Sedimentogenesis in Marginal and Inland Seas]. Nauka, Moscow, pp. 46-51. Yanko-Hombach, V.V., 2007. Controversy over Noah's Flood in the Black Sea: Geological and foraminiferal evidence from the shelf. In Yanko-Hombach, V., Gilbert, A.S., Panin, N., and Dolukanov, P.M. (eds.), [The Black Sea Flood Question: Changes in Coastline, Climate and Human Settlement]. Springer, Dordrecht, pp. 149-203. Semenenko, V. N.; Kovaliuh, N.N., 1973. Absoliutnîi vozrast verhnecertverticinîh otlojenii Azovo-Cernomorskogo basseina po dannîm radiouglerodnogo analiza, Gheologhiceskii jurnal, T 33, 6, 11-17. [Upper Quaternary sediments absolute radiocarbon age data from the Azovian - Black Sea Basin]. Journal of Geology,T 33, 6, 11-17.

Structure and work process in primary care and hospitalizations for sensitive conditions.

PubMed

Araujo, Waleska Regina Machado; Queiroz, Rejane Christine de Sousa; Rocha, Thiago Augusto Hernandes; Silva, Núbia Cristina da; Thumé, Elaine; Tomasi, Elaine; Facchini, Luiz Augusto; Thomaz, Erika Barbara Abreu Fonseca

2017-08-17

The objective of this study is to investigate whether the characteristics of the structure of primary health units and the work process of primary care teams are associated with the number of hospitalizations for primary care sensitive conditions. In this ecological study, we have analyzed data of Brazilian municipalities related to sociodemographic characteristics, coverage of care programs, structure of primary health units, and work process of primary care teams. We have obtained the data from the first cycle of the Brazilian Program for Improving Access and Quality of the Primary Care, of the Department of Information Technology of the Brazilian Unified Health System, the Brazilian Institute of Geography and Statistics, and the United Nations Development Programme. The associations have been estimated using negative binomial regression coefficients (β) and respective 95% confidence intervals, with a hierarchical approach in three levels (alpha = 5%). In the adjusted analysis for the outcome in 2013, in the distal level, the coverage of the Bolsa Família Program (β = -0.001) and private insurance (β = -0.01) had a negative association, and the human development index (β = 1.13), the proportion of older adults (β = 0.05) and children under the age of five (β = 0.05), and the coverage of the Community Health Agent Strategy (β = 0.002) showed positive association with hospitalizations for primary care sensitive conditions. In the intermediate level, minimum hours (β = -0.14) and availability of vaccines (β = -0.16) showed a negative association, and availability of medications showed a positive association (β = 0.16). In the proximal level, only the variable of matrix support (β = 0.10) showed a positive association. The variables in the adjusted analysis of the number of hospitalizations for primary care sensitive conditions in 2014 presented the same association as in 2013. The characteristics of the structure of primary health units and the work process of the primary care teams impact the number of hospitalizations for primary care sensitive conditions in Brazilian municipalities. Investigar se características da estrutura das unidades básicas de saúde e do processo de trabalho das equipes de atenção básica estão associadas ao número de internações por condições sensíveis à atenção primária. Neste estudo ecológico, foram analisados dados de municípios brasileiros relativos a características sociodemográficas, de cobertura de programas assistenciais, de estrutura das unidades básicas de saúde e processo de trabalho das equipes de atenção básica. Os dados foram obtidos do primeiro ciclo do Programa de Melhoria do Acesso e Qualidade da Atenção Básica, do Departamento de Informática do Sistema Único de Saúde, do Instituto Brasileiro de Geografia e Estatística e do Programa das Nações Unidas. Estimaram-se as associações por meio de coeficientes de regressão binomial negativa (β) e respectivos intervalos de confiança a 95%, com abordagem hierarquizada em três blocos (alpha = 5%). Na análise ajustada, para o desfecho em 2013, no bloco distal, a cobertura do Programa Bolsa Família (β = -0,001) e de plano privado (β = -0,01) apresentaram associação negativa; e o índice de desenvolvimento humano (β = 1,13), a proporção de pessoa idosa (β = 0,05) e de menor de cinco anos (β = 0,05) e a cobertura da Estratégia de Agentes Comunitários de Saúde (β = 0,002) mostraram associação positiva com internações por condições sensíveis à atenção primária. No bloco intermediário, apresentaram associação negativa o horário mínimo (β = -0,14) e a disponibilidade de vacina (β = -0,16); e associação positiva, a disponibilidade de medicamentos (β = 0,16). No bloco proximal, apenas a variável apoio matricial (β = 0,10) mostrou associação positiva. Na análise ajustada do número de internações por condições sensíveis à atenção primária em 2014, as variáveis apresentaram o mesmo sentido de associação de 2013. Características da estrutura das unidades básicas de saúde e do processo de trabalho das equipes de atenção básica impactam no número de internações por condições sensíveis à atenção primária nos municípios brasileiros.

Evaluation in health: participatory methodology and involvement of municipal managers.

PubMed

Almeida, Cristiane Andrea Locatelli de; Tanaka, Oswaldo Yoshimi

2016-08-04

To analyze scopes and limits of the use of participatory methodology of evaluation with municipal health managers and administrators. Qualitative research with health policymakers and managers of the Comissão Intergestores Regional (CIR - Regional Interagency Commission) of a health region of the state of Sao Paulo in Brazil. Representatives from seven member cities participated in seven workshops facilitated by the researchers, with the aim of assessing a specific problem of the care line, which would be used as a tracer of the system integrality. The analysis of the collected empirical material was based on the hermeneutic-dialectic methodology and aimed at the evaluation of the applied participatory methodology, according to its capacity of promoting a process of assessment capable to be used as a support for municipal management. With the participatory approach of evaluation, we were able to promote in-depth discussions with the group, especially related to the construction of integral care and to the inclusion of the user's perspective in decision-making, linked to the search for solution to concrete problems of managers. By joint exploration, the possibility of using data from electronic information systems was opened, as well as information coming directly from the users of the services, to enhance discussions and negotiations between partners. The participants were disbelievers of the replication potential of this type of evaluation without the direct monitoring of the academy, given the difficulty of organizing the process in everyday life, already taken by emergency and political issues. Evaluations of programs and services carried out within the Regional Interagency Commission, starting from the local interest and facilitating the involvement of its members by the use of participatory methodologies, can contribute to the construction of integral care. To the extent that the act of evaluating stay invested with greater significance to the local actors, its involvement with the evaluations at the federal level can also be stimulated. Analisar alcances e limites do uso de metodologia participativa de avaliação junto a gestores e gerentes municipais de saúde. Pesquisa qualitativa com gestores e gerentes de saúde da Comissão Intergestores Regional de uma região de saúde do estado de São Paulo. Representantes de sete municípios membros participaram de sete oficinas facilitadas pelos pesquisadores, com o objetivo de avaliar um problema específico da linha de cuidados sob a perspectiva da integralidade. A análise do material empírico coletado baseou-se na metodologia hermenêutica-dialética e visou a avaliação da metodologia participativa aplicada, segundo sua capacidade de promover um processo de avaliação passível de ser utilizado como suporte à gestão municipal. Com a abordagem participativa de avaliação, foi possível promover debates em profundidade com o grupo, principalmente relacionados à construção da integralidade da atenção e à inclusão da perspectiva do usuário na tomada de decisão, de forma vinculada à busca de solução para problemas concretos dos gestores. Mediante a exploração conjunta, foi aberta a possibilidade de utilização de dados advindos dos sistemas eletrônicos de informação, bem como de informações advindas diretamente dos usuários dos serviços, para enriquecer debates e negociações entre parceiros. Os participantes se mostraram descrentes do potencial de replicação deste tipo de avaliação sem o acompanhamento direto da academia, dada a dificuldade de organização do processo no cotidiano, já tomado por questões emergenciais e políticas. Avaliações de programas e serviços realizadas no âmbito da Comissão Intergestores Regional, partindo do interesse local e facilitando o envolvimento de seus membros pelo uso de metodologias participativas, podem contribuir para a construção da integralidade do cuidado. Na medida em que o ato de avaliar fique investido de maior significado para os atores locais, seu envolvimento com as avaliações em nível federal poderá ser também estimulado.

Moral Distress in Family Health Strategy: experiences expressed by daily life.

PubMed

Cardoso, Cecília Maria Lima; Pereira, Maria Odete; Moreira, Danielle de Araújo; Tibães, Hanna Beatriz Bacelar; Ramos, Flávia Regina Souza; Brito, Maria José Menezes

2016-06-01

Understanding the Moral Suffering experiences expressed in the daily life of the Family Health Strategy. This is a case study with a qualitative approach, conducted between August and October 2014 in a municipality of Minas Gerais. The sample was represented by 28 professionals of family health teams. Data were collected through interviews with semi-structured questionnaires, observation, projective technique and submitted to thematic content analysis. The results indicate that routine issues of the health care system lead professionals to experience a challenging practice in dealing with daily situations that contradict their ethical precepts and can compromise the quality of work, becoming triggers of Moral Distress. Social vulnerabilities such as domestic violence, poor socioeconomic conditions and organizational weaknesses of the health system were the main triggers of Moral Distress. Therefore, it is necessary to amplify this reflection by workers of the Family Health Strategy, aiming to encourage the minimization of suffering experiences, considering their ethical values. Compreender as vivências de Sofrimento Moral expressas no cotidiano da Estratégia de Saúde da Família. Trata-se de um estudo de caso com abordagem qualitativa, realizado entre os meses de agosto a outubro de 2014, cujo cenário foi um município de Minas Gerais. Participaram 28 profissionais das equipes de saúde da família. Os dados foram coletados por meio de entrevistas com roteiro semiestruturado, observação, técnica projetiva e, submetidos à análise de conteúdo temática. Os resultados apontaram que as questões rotineiras do serviço de saúde levam os profissionais a vivenciarem uma prática desafiadora ao lidarem diariamente com situações que contradizem seus preceitos éticos capazes de comprometer a qualidade do trabalho tornando-se disparadores de Sofrimento Moral. As vulnerabilidades sociais, como violência doméstica e condições socioeconômicas precárias, além das fragilidades organizacionais do Sistema de Saúde, foram os principais geradores de Sofrimento Moral. Assim, considera-se necessária a reflexão ampliada sobre a temática por parte dos trabalhadores da Estratégia de Saúde da Família, com intuito de propiciar a minimização de vivências de sofrimento e uma prática profissional em consonância com seus valores éticos.

Mouthpiece ventilation in Duchenne muscular dystrophy: a rescue strategy for noncompliant patients.

PubMed

Fiorentino, Giuseppe; Annunziata, Anna; Cauteruccio, Rosa; Frega, Gianfranco Scotto di; Esquinas, Antonio

2016-01-01

To evaluate mouthpiece ventilation (MPV) in patients with Duchenne muscular dystrophy (DMD) who are noncompliant with noninvasive ventilation (NIV). We evaluated four young patients with DMD who had previously refused to undergo NIV. Each patient was reassessed and encouraged to try MPV. The four patients tolerated MPV well and were compliant with NIV at home. MPV proved to be preferable and more comfortable than NIV with any other type of interface. Two of the patients required overnight NIV and eventually agreed to use a nasal mask during the night. The advantages of MPV over other types of NIV include fewer speech problems, better appearance, and less impact on the patient, eliminating the risk of skin breakdown, gastric distension, conjunctivitis, and claustrophobia. The use of a mouthpiece interface should be always considered in patients with DMD who need to start NIV, in order to promote a positive approach and a rapid acceptance of NIV. Using MPV during the daytime makes patients feel safe and more likely to use NIV at night. In addition, MPV increases treatment compliance for those who refuse to use other types of interfaces. Avaliar a ventilação bucal (VB) em pacientes com distrofia muscular de Duchenne (DMD) não aderentes à ventilação não invasiva (VNI). Foram avaliados quatro pacientes jovens com DMD que anteriormente recusaram-se a se submeter à VNI. Cada paciente foi reavaliado e encorajado a tentar VB. Os quatro pacientes toleraram bem a VB e aderiram ao uso de VNI em casa. O uso de VB provou ser uma alternativa preferível e mais confortável que o uso de VNI com qualquer outro tipo de interface. Dois dos pacientes necessitaram de VNI noturna e eventualmente aceitaram utilizar uma máscara nasal durante a noite. As vantagens da VB sobre outros tipos de VNI incluem menores problemas na fala, melhor aparência e menor impacto no paciente, eliminando o risco de lesões na pele, distensão gástrica, conjuntivite e claustrofobia. O uso da interface bucal sempre deve ser considerado em pacientes com DMD que necessitam iniciar VNI a fim de promover uma abordagem positiva e uma rápida aceitação da VNI. O uso diurno de VB faz com que os pacientes sintam-se seguros e mais propensos a utilizar VNI à noite. Além disso, a VB aumenta a adesão ao tratamento naqueles pacientes que se recusam a utilizar outros tipos de interfaces.

Nurses in post-operative heart surgery: professional competencies and organization strategies.

PubMed

Santos, Ana Paula Azevedo; Camelo, Silvia Helena Henriques; Santos, Fabiana Cristina Dos; Leal, Laura Andrian; Silva, Beatriz Regina da

2016-01-01

To analyze nurses' competencies with regard to their work in post-operative heart surgery and the strategies implemented to mobilize these competencies. This was an exploratory study with a qualitative approach and a methodological design of collective case study. It was carried out in three post-operative heart surgery units, consisting of 18 nurses. Direct observation and semi-structured interviews were employed to collect data. Data were construed through thematic analysis. nine competencies were found, as follows: theoretical-practical knowledge; high-complexity nursing care; nursing supervision; leadership in nursing; decision making; conflict management; personnel management; material and financial resources management; and on-job continued education. Organizational and individual strategies were employed to develop and improve competencies such as regular offerings of courses and lectures, in addition to the individual pursuit for knowledge and improvement. the study is expected to lead future nurses and training centers to evaluate the need for furthur training required to work in cardiac units, and also the need for implementing programs aimed at developing the competencies of these professionals. Analisar as competências dos enfermeiros para atuarem no pós-operatório de cirurgia cardíaca e estratégias implementadas para a mobilização dessas competências. Estudo exploratório, com abordagem qualitativa e desenho metodológico estudo de caso coletivo. Foi realizado em três unidades pós-operatórias de cirurgias cardíacas, com 18 enfermeiros. Na coleta de dados utilizou-se observação direta e entrevista semiestruturada. Para interpretação dos dados optou-se pela análise temática. Foram identificadas nove competências, sendo: conhecimento teórico-prático, cuidados de enfermagem de alta complexidade, supervisão e liderança em enfermagem, tomada de decisão, gerenciamento de conflitos, de recursos humanos, materiais, financeiros e educação continuada em serviço. Estratégias organizacionais e individuais são realizadas a fim de desenvolver e aprimorar competências, tais como: oferecimento de cursos e palestras periodicamente, além da busca individual por conhecimento e aperfeiçoamento. O estudo deve provocar a reflexão de futuros enfermeiros e dos centros formadores quanto à formação necessária para atuar em unidades cardíacas e sobre a necessidade de implementação de programas que visam desenvolver competências nestes profissionais.

EFFECTIVE INDICATORS FOR SCIENCE INTERNATIONALIZATION.

PubMed

Cunha-Melo, José Renan da

2015-01-01

To review of concepts and actions that aim to analyze the effects of internationalization of science and education, with emphasis in the medical field and its basement in development policies adopted by nations, exploring the potential for international interdisciplinary cooperation of each laboratory, department, university or institute. Search of indicators to assess the degree of internationalization of universities and research institutes in several interconnected levels: organizational, regional, sectoral and global, and policy-making in science, technology innovation and higher education. Scientific research is still carried out individually, but is now much more closely integrated with other social processes. The scientist is no longer a stranger who is allowed to surrender to his hobby to do what it wants. Internationalization of research and medical education, although it is among the topics of greatest need, as the globalized world, is difficult activity to be assessed. The leaders seem to have understood that the knowledge societies, leading to economic policy based on knowledge, can result in economic and social progress of nations. This fact has motivated increasingly the incentive to actions aimed at addressing global problems (eg health, climate change) by funding research that generates new knowledge. The consensus is that the internationalization of science is desirable and necessary for the sustainable development of nations. However it cannot be done only by encouraging and promoting the outward students and researchers abroad. It is necessary, in addition, offer conditions to foreign researchers and students teachers to work in collaboration with Brazilian and raise the country to international scientific standards. Apresentar revisão dos conceitos e ações que objetivam analisar os efeitos da internacionalização da ciência e da educação, com ênfase na área médica e seu embasamento nas políticas de desenvolvimento adotadas pelas nações, explorando o potencial para cooperação internacional interdisciplinar de cada laboratório, departamento, universidade ou instituto. Procura de indicadores que possam avaliar o grau de internacionalização das universidades e institutos de pesquisa em vários níveis interconectados: organizacional, regional, setorial e global e para definição de políticas nas áreas de ciência, tecnologia inovação e educação superior. A pesquisa científica ainda é realizada individualmente, mas está atualmente muito mais intimamente integrada a outros processos sociais. O cientista não é mais um estranho que tem permissão para entregar-se ao seu passatempo de fazer aquilo que bem entende. Internacionalização da pesquisa e da educação médica, embora esteja entre os tópicos de maior reconhecimento como sendo necessidade do mundo globalizado, é atividade difícil de ser avaliada. Os governantes parecem ter entendido que as sociedades do conhecimento, induzindo a política econômica baseada no conhecimento pode resultar em progresso econômico e social das nações. Esse fato tem motivado de forma crescente o incentivo às ações que visam a abordagem de problemas globais (e.g. saúde, mudanças climáticas) pelo financiamento da pesquisa que gera conhecimento novo. É consenso que a internacionalização da ciência é desejável e necessária para o desenvolvimento sustentável das nações. Entretanto ela não pode ser feita somente incentivando e fomentando a ida de estudantes e pesquisadores para o exterior. É preciso, em adição, oferecer condições a professores pesquisadores e estudantes estrangeiros para que possam atuar em colaboração com os brasileiros e elevar o país aos padrões científicos internacionais.

The impact of the use of different types of gloves and bare hands for preparation of clean surgical instruments.

PubMed

Bruna, Camila Quartim de Moraes; Souza, Rafael Queiroz de; Massaia, Irineu Francisco Silva; Cruz, Áurea Silveira; Graziano, Kazuko Uchikawa

2016-10-10

to determine if there are differences on the safety of the preparation of clean surgical instruments using different types of gloves and bare hands and evaluate the microbiological load of these preparations without gloves. laboratory procedure with a pragmatic approach, in which the samples were handled with different types of gloves and bare hands. In addition, cytotoxicity assays were carried out by means of the agar diffusion method. Further samples were subjected to microbiological analysis after being handled without gloves. none of the samples showed cytotoxic effect. All microbiological cultures showed growth of microorganisms, but no microorganism has been recovered after autoclaving. there were no differences in the cytotoxic responses regarding the use of different types of gloves and bare hands in the handling of clean surgical instruments, which could entail iatrogenic risk. It is noteworthy that the use of gloves involves increase in the costs of process and waste generation, and the potential allergenic risk to latex. determinar se existe diferenças na segurança do preparo de instrumentais cirúrgicos relacionada ao uso de distintos tipos de luvas e das mãos nuas no preparo, e avaliar a carga microbiológica destes preparados sem luvas. experimento laboratorial com abordagem pragmática, onde amostras foram manipuladas com diferentes tipos de luvas e com as mãos nuas, elaborado teste de citotoxicidade por meio da difusão em ágar. Outras Amostras sofreram análise microbiológica após serem manipuladas sem luvas. nenhuma das amostras apresentou efeito citotóxico. Todas as culturas microbiológicas apresentaram crescimento de microrganismos, embora nenhum microrganismo tenha sido recuperado após a autoclavação. não houve diferenças nas respostas citotóxicas relacionadas ao uso de diferentes tipos de luvas e das mãos nuas na manipulação do instrumental cirúrgico limpo que sinalizasse risco de iatrogenia. Ressalta-se que o uso de luvas implica em aumento dos custos do processo e da geração de resíduos, além do potencial risco alergênico ao látex. determinar si existen diferencias en la seguridad de la preparación del instrumental quirúrgico relacionadas con el uso de diferentes tipos de guantes y de las manos desnudas y evaluar la carga microbiológica de estos preparados sin guantes. experimento de laboratorio con enfoque pragmático, en el que las muestras fueron manejadas con diferentes tipos de guantes y las manos desnudas. Además, un ensayo de citotoxicidad se llevó a cabo mediante el método de difusión en agar. Otras muestras fueron sometidas a análisis microbiológico después de haber sido manipuladas sin guantes. ninguna de las muestras presentó efecto citotóxico. Todos los cultivos microbiológicos mostraron crecimiento de microorganismos, pero ningún microorganismo ha sido recuperado después de la esterilización en autoclave. no hubo diferencias en las respuestas citotóxicas con respecto al uso de diferentes tipos de guantes y de las manos desnudas en el manejo del instrumental quirúrgico limpio, lo que podría conllevar riesgo de yatrogenia. Es de destacar que el uso de guantes implica un aumento de los costos del proceso y la generación de residuos, además del potencial riesgo alergénico al látex.

The family experience of care in chronic situation.

PubMed

Bellato, Roseney; Araújo, Laura Filomena Santos de; Dolina, Janderléia Valéria; Musquim, Cleciene Dos Anjos; Corrêa, Geovana Hagata de Lima Souza Thaines

2016-06-01

An essay that aims to reflect on the family experience of care in chronic situation, increasing the understanding of the family as the primary caregiver. It is based on comprehensive approach in studies conducted in three matrix searches from family care experiences. We have taken three axes to organize our reflections: a) conformation of family care in chronic situation, highlighting the multiple costs incurred to the family, which can exhaust the potential of care and establish or increase its vulnerability if it is not backed by networks support and sustenance; b) family rearrangements for the care, giving visibility to care cores in which many loved family members share the care, dynamic, plural and changeable way; c) self care modeling family care, pointing to the range of possibilities of the person taking care of diseased conditions supported by people close to them. We learn that the family takes care of itself in everyday life and in the illness experience, creating networks that can provide you support and sustenance. Thus, professionals in health practices should shape up in a longitudinal and very personal way, by reference to the family care, supporting him in what is his own. Ensaio que tem por objetivo refletir sobre a experiência familiar de cuidado na situação crônica, ampliando a compreensão da família como cuidadora primária. Embasa-se em estudos de abordagem compreensiva realizados em três pesquisas matriciais que abordaram experiências familiares de cuidado. Tomamos três eixos para organizar nossas reflexões: a) conformação do cuidado familiar na situação crônica, destacando os múltiplos custos gerados à família, que podem exaurir seus potenciais de cuidado, instaurando ou ampliando sua vulnerabilidade se não for amparada por redes de apoio e sustentação; b) rearranjos familiares para o cuidado, dando visibilidade aos núcleos de cuidado compartilhados pelos diversos entes familiares, de modo dinâmico, plural e mutável; c) cuidado próprio modelando o cuidado familiar, apontando a gama de condições de possibilidades da pessoa adoecida se cuidar apoiada pelas pessoas que lhe são próximas. Compreendemos que a família cuida de si e de seus entes no bojo da vida, assim como na experiência de adoecimento, tecendo redes que a sustentem ao longo do tempo. As práticas profissionais em saúde precisam modelar-se, então, tendo por referência o cuidado familiar, amparando-o naquilo que lhe seja próprio.

Velocity and structural model of the Lower Tagus Basin according to the study of environmental seismic noise

NASA Astrophysics Data System (ADS)

Gomes Torres, Ricardo Jorge; Furtado, José Augusto; Gonçalves Silva, Hugo; Borges, José Fernando; Caldeira, Bento; Bezzeghoud, Mourad; Carvalho, João

2013-04-01

Along his history the Lower Tagus Valley (LTV) region was shaken by several earthquakes, some of them produced in large ruptures of offshore structures located southwest of the Portuguese coastline. Among these is the Lisbon earthquake of 1 November 1755 (M~8.5-8.7), and other moderates earthquakes that were produced by local sources such as the 1344 (M6.0), 1531 (M7.1) and 1909 (M6.0) earthquakes. Previous simulations [1] have shown high velocity amplification in the region. The model used in the simulations was updated from low to high resolution using all the new available geophysical and geotechnical data on the area (seismic reflection, aeromagnetic, gravimetric, deep wells and geological outcrops) [2]. To confirm this model in the areas where it was derived by potential field methods we use broadband ambient noise measurements collected in about 200 points along seven profiles on the LTV basin, six perpendicular and one parallel to the basin axis. We applied the horizontal to vertical (H/V) spectral ratio method [3] to the seismic noise profiles in order to estimate the distribution of amplification in the basin. The H/V curves obtained reveals the existence of two low frequency peaks centered on 0.2 and 1 Hz [4]. These peaks are strongly related with the thickness of Cenozoic and alluvial sediments. The velocity model obtained by inversion of the H/V curves is in good agreement with borehole data, and results obtained using seismic reflection and gravimetric methods. However, aeromagnetic data overestimates the depth of the base of Cenozoic in the areas where it overlies directly the paleozoic basement, which we attribute either to the existence of Mesozoic units or higher magnetic susceptibilities than expected for the Paleozoic. References: [1] Bezzeghoud, M., Borges, J.F., M., Caldeira (2011). Ground motion simulations of the SW Iberia margin: rupture directivity and earth structure effects. Natural Hazards, pages 1-17. doi:10.1007/s11069-011-9925-2 [2] Torres, R.J.G., (2012). Modelo de velocidade da Bacia do Vale do Tejo: uma abordagem baseada no estudo do ruído sísmico ambiental, Master Thesis, Universidade de Évora, 83pp. [3] Nakamura, Y., 1989. A method for dynamic characteristics estimations of subsurface using microtremors on the ground surface, Quarterly Report, RTRI, Japan, v. 30, p. 25-33. [4] J.A. Furtado, Confirmação do modelo da estrutura 3D do Vale Inverior do Tejo a partir de dados de ruído sísmico ambiente, Master Thesis, Universidade de Évora, 136pp, 2010.

Cross-cultural adaptation and validation of the teamwork climate scale.

PubMed

Silva, Mariana Charantola; Peduzzi, Marina; Sangaleti, Carine Teles; Silva, Dirceu da; Agreli, Heloise Fernandes; West, Michael A; Anderson, Neil R

2016-08-22

To adapt and validate the Team Climate Inventory scale, of teamwork climate measurement, for the Portuguese language, in the context of primary health care in Brazil. Methodological study with quantitative approach of cross-cultural adaptation (translation, back-translation, synthesis, expert committee, and pretest) and validation with 497 employees from 72 teams of the Family Health Strategy in the city of Campinas, SP, Southeastern Brazil. We verified reliability by the Cronbach's alpha, construct validity by the confirmatory factor analysis with SmartPLS software, and correlation by the job satisfaction scale. We problematized the overlap of items 9, 11, and 12 of the "participation in the team" factor and the "team goals" factor regarding its definition. The validation showed no overlapping of items and the reliability ranged from 0.92 to 0.93. The confirmatory factor analysis indicated suitability of the proposed model with distribution of the 38 items in the four factors. The correlation between teamwork climate and job satisfaction was significant. The version of the scale in Brazilian Portuguese was validated and can be used in the context of primary health care in the Country, constituting an adequate tool for the assessment and diagnosis of teamwork. Adaptar e validar a escala Team Climate Invetory, de medida do clima de trabalho em equipe, para o idioma português, no contexto da atenção primária à saúde no Brasil. Estudo metodológico com abordagem quantitativa de adaptação transcultural (tradução, retrotradução, síntese, comitê de especialistas e pré-teste) e validação com 497 trabalhadores de 72 equipes da Estratégia Saúde da Família no município de Campinas, São Paulo. Verificou-se confiabilidade pelo alfa de Cronbach, validade de construto pela análise fatorial confirmatória pelo software SmartPLS e correlação com escala de satisfação no trabalho. Foi problematizado a sobreposição dos itens 9, 11 e 12 do fator participação na equipe e o fator objetivos da equipe no tocante à sua definição. A validação mostrou que não houve sobreposição dos itens e a confiabilidade variou entre 0,92 a 0,93. A análise fatorial confirmatória indicou adequação do modelo proposto com distribuição dos 38 itens nos quatro fatores. A correlação entre clima de trabalho em equipe e satisfação no trabalho foi significativa. A versão da escala em português falado no Brasil foi validada e pode ser utilizada no contexto da atenção primária à saúde no País, constituindo ferramenta adequada para a avaliação e diagnóstico do trabalho em equipe.

Primary Health Care: care coordinator in regionalized networks?

PubMed

Almeida, Patty Fidelis de; Santos, Adriano Maia Dos

2016-12-22

To analyze the breadth of care coordination by Primary Health Care in three health regions. This is a quantitative and qualitative case study. Thirty-one semi-structured interviews with municipal, regional and state managers were carried out, besides a cross-sectional survey with the administration of questionnaires to physicians (74), nurses (127), and a representative sample of users (1,590) of Estratégia Saúde da Família (Family Health Strategy) in three municipal centers of health regions in the state of Bahia. Primary Health Care as first contact of preference faced strong competition from hospital outpatient and emergency services outside the network. Issues related to access to and provision of specialized care were aggravated by dependence on the private sector in the regions, despite progress observed in institutionalizing flows starting out from Primary Health Care. The counter-referral system was deficient and interprofessional communication was scarce, especially concerning services provided by the contracted network. Coordination capacity is affected both by the fragmentation of the regional network and intrinsic problems in Primary Health Care, which poorly supported in its essential attributes. Although the health regions have common problems, Primary Health Care remains a subject confined to municipal boundaries. Analisar o alcance da coordenação do cuidado pela Atenção Primária à Saúde em três regiões de saúde. Trata-se de estudo de caso, com abordagem quantitativa e qualitativa. Foram realizadas 31 entrevistas semiestruturadas com gestores municipais, regionais e estaduais e estudo transversal com aplicação de questionários para médicos (74), enfermeiros (127) e amostra representativa de usuários (1.590) da Estratégia Saúde da Família em três municípios-sede de regiões de saúde do estado da Bahia. A função de porta de entrada preferencial pela Atenção Primária à Saúde deparava-se com forte concorrência de serviços ambulatoriais hospitalares e de pronto-atendimento, desarticulados da rede. Problemas de acesso e oferta de atenção especializada eram agravados pela dependência do setor privado nas regiões, ainda que tenham sido observados avanços na institucionalização de fluxos desde a Atenção Primária à Saúde. A contrarreferência era deficiente e a comunicação interprofissional escassa, principalmente quando o usuário era atendido na rede contratada ou conveniada. A capacidade de coordenação mostra-se afetada tanto pela fragmentação da rede regional, quanto por problemas intrínsecos à Atenção Primária à Saúde, pouco fortalecida em seus atributos essenciais. Apesar de as regiões de saúde apresentarem problemas em comum, a Atenção Primária à Saúde continua sendo um tema circunscrito aos limites municipais.

Analysis of obese patients' medical conditions in the pre and postoperative periods of bariatric surgery.

PubMed

Rêgo, Anderson DA Silva; Zulin, Aline; Scolari, Sandro; Marcon, Sônia Silva; Radovanovic, Cremilde Aparecida Trindade

2017-01-01

to compare the clinical conditions of obese patients in the pre and postoperative period of bariatric surgery. we carried out a descriptive, retrospective, quantitative study by consulting the charts of 134 patients who underwent bariatric surgery in the period from 2009 to 2014. We collected the data between September and November 2015. We performed a descriptive statistical analysis and comparative analysis of anthropometric, metabolic, biochemical and clinical variables, considering six months before and after surgery. the majority of the patients were female (91.8%), with a higher prevalence (35%) in the age group 18-29 years old, complete high-school education (65.6%) and grade III obesity (60.4%). Six months after surgery, weight and lipid profile reduction were significant in both genders, but the impact on biochemical, anthropometric, metabolic and clinical parameters was significant only in female subjects, with a reduction in morbidities associated with obesity, such as arterial hypertension, diabetes mellitus, dyslipidemia and metabolic syndrome and in the use of drugs to control them. bariatric surgery was effective in weight loss, with improvements in anthropometric, metabolic and biochemical parameters and in the reduction of morbidities associated with obesity. comparar as condições clínicas de pacientes obesos em período pré e pós-operatório de cirurgia bariátrica. estudo descritivo, retrospectivo, de abordagem quantitativa, por meio de consulta ao prontuário de 134 pacientes submetidos à cirurgia bariátrica no período de 2009 a 2014. Os dados foram coletados entre os meses de setembro e novembro de 2015. Foi realizada análise estatística descritiva e comparativa das variáveis antropométricas, metabólicas, bioquímicas e clínicas, considerando seis meses antes e após a cirurgia. a maioria dos pacientes era do sexo feminino (91,8%), com maior prevalência (35%) na faixa etária de 18 aos 29 anos, com ensino médio completo (65,6%) e obesidade grau III (60,4%). Seis meses após a cirurgia, a redução do peso e o perfil lipídico foram significativos em ambos os sexos, mas o impacto nos parâmetros bioquímicos, antropométricos, metabólicos e clínicos foi significativo apenas nos indivíduos do sexo feminino, com redução das morbidades associadas à obesidade como hipertensão arterial, diabetes mellitus, dislipidemia e síndrome metabólica e na utilização de medicamentos. a cirurgia bariátrica foi eficaz na perda ponderal de peso, com melhoras nos parâmetros antropométricos, metabólicos e bioquímicos e na redução de morbidades associadas à obesidade.

Culture-bound syndromes in migratory contexts: the case of Bolivian immigrants.

PubMed

Roldán-Chicano, María Teresa; Fernández-Rufete, José; Hueso-Montoro, César; García-López, María Del Mar; Rodríguez-Tello, Javier; Flores-Bienert, María Dolores

2017-07-10

to describe the culture-bound syndromes maintained by Bolivian immigrants in the new migratory context and analyze the care processes of these health problems. qualitative research with an ethnographic methodological approach. Sample: 27 Bolivian immigrants. In-depth interviews and participatory observation were the strategies used for data collection. Data were classified and categorized into logical schemes manually and using the ATLAS-ti program v.5. susto, "wayras", amartelo, pasmo de sol, pasmo de luna and pasmo de sereno are some of the folk illnesses that affect the Bolivian immigrants and that they have to treat in the new migratory context. in the new environment, the group under study preserves culture-bound syndromes that are common in their country of origin. The care strategies used for these health problems are adapted to the resources of the new context and based on interactions with the domestic environment, biomedicine and traditional medicine. It was observed the need for the health professionals to realize that the efficacy of certain therapies occurs within the scope of cultural beliefs and not in that of the scientific evidence. descrever as síndromes vinculadas à cultura mantidas pelos imigrantes bolivianos no novo contexto migratório e analisar os processos de cuidado para esses problemas de saúde. projeto de pesquisa de natureza qualitativa e com abordagem metodológica etnográfica. Amostra: 27 imigrantes bolivianos. As estratégias para a coleta de dados foram as entrevistas em profundidade e a observação participativa. Os dados foram classificados e categorizados em esquemas lógicos manualmente e por meio do programa ATLAS-ti v.5. o susto, os "wayras", o amartelo (tristeza), o pasmo de sol, o pasmo de lua e o pasmo de sereno são algumas das síndromes de caráter popular que acometem os imigrantes bolivianos, e que eles tratam no novo contexto migratório. no novo ambiente, as síndromes vinculadas à cultura, comuns em seu país de origem, são mantidas pelo grupo estudado. As formas de cuidado para esses problemas de saúde são adaptadas aos recursos do novo contexto e baseadas em interações com o ambiente doméstico, a biomedicina e a medicina tradicional. Foi constatada a necessidade de que os profissionais de saúde reconheçam que a eficácia de determinadas terapias se dá no âmbito das crenças culturais e não no âmbito da comprovação científica. describir los síndromes de filiación cultural que mantienen los inmigrantes bolivianos en el nuevo contexto migratorio y analizar los procesos de atención de estos padecimientos. diseño de investigación de carácter cualitativo con enfoque metodológico etnográfico. Muestra: 27 inmigrantes bolivianos. Las estrategias para recoger datos fueron las entrevistas en profundidad y la observación participante. Los datos se categorizaron y ordenaron en esquemas lógicos manualmente y a través del programa ATLAS-ti v.5. el susto, los "wayras", el amartelo, el pasmo de sol, el pasmo de luna y el pasmo de sereno son algunos de los síndromes de carácter folk que los inmigrantes bolivianos padecen y tratan en el nuevo contexto migratorio. en el nuevo entorno, el colectivo estudiado mantiene síndromes de filiación cultural comunes en su país de origen. Las formas de atención de éstos padecimientos se adaptan a los recursos del nuevo contexto y se basan en transacciones con el ámbito doméstico, la biomedicina y la medicina tradicional. Se constata la necesidad de que el profesional sanitario reconozca que la efectividad percibida de ciertas terapias opera dentro del ámbito de las creencias culturales y no en el de la evidencia científica.

Fatigue in children and adolescents with cancer from the perspective of health professionals.

PubMed

Silva, Michele Cristina Miyauti da; Lopes, Luís Carlos; Nascimento, Lucila Castanheira; Lima, Regina Aparecida Garcia de

2016-08-29

to investigate health professionals' knowledge about the concept, assessment and intervention in fatigue in children and adolescents with cancer. exploratory study with qualitative approach, with 53 health professionals (10 nurses, 33 assistant nurses, 3 physicians, 3 nutritionists, 2 psychologists and 2 physical therapists). Semi structured interviews were held, which were recorded and analyzed by means of inductive thematic content analysis. the data were organized around three themes: knowledge of health professionals about fatigue; identification of fatigue and interventions to relieve fatigue. the results indicate the health professionals' limited knowledge about fatigue, as well as the lack of investment in their training and continuing education. Most of all, the lack of research on the theme in the Brazilian context remains a barrier to support improvements in care for this symptom in children and adolescents with cancer. investigar quais conhecimentos os profissionais de saúde têm acerca do conhecimento, avaliação e intervenção sobre a fadiga em crianças e adolescentes com câncer. estudo exploratório com abordagem qualitativa, realizado com 53 profissionais de saúde (10 enfermeiros, 33 auxiliares de enfermagem, 3 médicos, 3 nutricionistas, 2 psicólogos e 2 fisioterapeutas). Foram conduzidas entrevistas semiestruturadas as quais foram gravadas e analisadas por meio do modelo de análise de conteúdo do tipo temática indutiva. os dados foram organizados ao redor de três temas: conhecimento dos profissionais da saúde sobre fadiga; identificação da fadiga e intervenções para o alívio da fadiga. os achados apontam para o conhecimento limitado dos profissionais de saúde sobre fadiga, bem como para o pouco investimento em educação continuada e permanente. Sobretudo, a escassez de estudos sobre o assunto no cenário brasileiro ainda é uma barreira para oferecer subsídios para melhoria deste sintoma em crianças e adolescentes com câncer. investigar cuales conocimientos los profesionales de salud poseen acerca del conocimiento, la evaluación e intervención sobre la fatiga en niños y adolescentes con cáncer. estudio exploratorio con aproximación cualitativa, desarrollado con 53 profesionales de salud (10 enfermeros, 33 auxiliares de enfermería, 3 médicos, 3 nutricionistas, 2 psicólogos y 2 fisioterapeutas). Fueron conducidas entrevistas semi-estructuradas, que fueron grabadas y analizadas mediante el modelo de análisis de contenido del tipo temático inductivo. los datos fueron organizados alrededor de tres temas: conocimiento de los profesionales de la salud acerca de la fatiga; identificación de la fatiga e intervenciones para el alivio de la fatiga. los hallazgos indican el conocimiento limitado de los profesionales de salud sobre fatiga, además de la poca inversión en educación continuada y permanente. Sobretodo, la escasez de estudios sobre el tema en el escenario brasileño sigue siendo una barrera para ofrecer apoyo para mejorar este síntoma en niños y adolescentes con cáncer.

Comparative study of knowledge about oral cancer among undergraduate dental students.

PubMed

Silva, Samara Ribeiro da; Juliano, Yara; Novo, Neil Ferreira; Weinfeld, Ilan

2016-01-01

To evaluate and compare the knowledge of dental undergraduate students about oral cancer. The students were divided into two groups according to semester attended in the undergraduate course: Group A, the first semester; and Group B, seventh semester. They were asked to answer a questionnaire about epidemiology, risk factors, clinical aspects, therapeutic solutions and oral self-examination. For statistical analysis, the Fisher's exact test, the Cochran's G test and Kendall's concordance test were used, with significance level set at 0.05. Regarding the prevalent sex, only 8.0% of Group A and 56.0% of Group B judged males as the frequent affected by the disease (p=0.0006). In terms of age, 84.0% of the Group B and 44.0% of the Group A estimated that most cases were diagnosed over 40 years (p=0.0072). Smoking was identified as the major risk factor for 64.0% and 91.6% of Groups A and B, respectively (p=0.0110). On issues related to sex, ethnicity, age, risk factors, self-examination, treatment, professional responsible for treatment and profile of an individual with the disease, the seventh-semester showed significantly higher correct answer percentages than first-semester undergraduates. There was significant correlation between the right and wrong answers given by first and seventh semester students, making necessary a specific approach directed to their lack of knowledge. Avaliar e comparar o conhecimento de acadêmicos de odontologia sobre câncer bucal. Os acadêmicos foram divididos em dois grupos, de acordo com o semestre cursado na graduação: Grupo A, primeiro semestre; e Grupo B: sétimo semestre. Eles foram convidados a responderem um questionário referente a epidemiologia, fatores de risco, aspectos clínicos, soluções terapêuticas e autoexame bucal. Para a análise estatística dos resultados, foram utilizados o teste exato de Fisher, o teste G de Cochran e o teste de concordância de Kendall, com nível de significância estabelecido em 0,05. Somente 8,0% do Grupo A e 56,0% do Grupo B julgaram o sexo masculino como aquele frequentemente acometido pela lesão (p=0,0006). Em relação à faixa etária, 84,0% do Grupo B e 44,0% do Grupo A estimaram que a maioria dos casos era diagnosticada acima dos 40 anos (p=0,0072). O tabagismo foi apontado como principal fator de risco por 64,0% e 91,6% dos alunos dos Grupos A e B, respectivamente (p=0,0110). Nas questões referentes a sexo, etnia, faixa etária, fatores de risco, autoexame, tratamento, profissional responsável pelo tratamento e perfil de um indivíduo portador da lesão, os alunos do sétimo semestre apresentaram percentagens de respostas corretas significantemente maiores que as dos discentes do primeiro semestre. Houve significativa concordância entre os erros e acertos dos discentes do primeiro e sétimo semestres, sendo necessária uma abordagem específica direcionada à deficiência por eles apresentadas.

MINIMALLY INVASIVE SURGERY FOR GASTRIC CANCER: TIME TO CHANGE THE PARADIGM.

PubMed

Barchi, Leandro Cardoso; Jacob, Carlos Eduardos; Bresciani, Cláudio José Caldas; Yagi, Osmar Kenji; Mucerino, Donato Roberto; Lopasso, Fábio Pinatel; Mester, Marcelo; Ribeiro-Júnior, Ulysses; Dias, André Roncon; Ramos, Marcus Fernando Kodama Pertille; Cecconello, Ivan; Zilberstein, Bruno

2016-01-01

Minimally invasive surgery widely used to treat benign disorders of the digestive system, has become the focus of intense study in recent years in the field of surgical oncology. Since then, the experience with this kind of approach has grown, aiming to provide the same oncological outcomes and survival to conventional surgery. Regarding gastric cancer, surgery is still considered the only curative treatment, considering the extent of resection and lymphadenectomy performed. Conventional surgery remains the main modality performed worldwide. Notwithstanding, the role of the minimally invasive access is yet to be clarified. To evaluate and summarize the current status of minimally invasive resection of gastric cancer. A literature review was performed using Medline/PubMed, Cochrane Library and SciELO with the following headings: gastric cancer, minimally invasive surgery, robotic gastrectomy, laparoscopic gastrectomy, stomach cancer. The language used for the research was English. 28 articles were considered, including randomized controlled trials, meta-analyzes, prospective and retrospective cohort studies. Minimally invasive gastrectomy may be considered as a technical option in the treatment of early gastric cancer. As for advanced cancer, recent studies have demonstrated the safety and feasibility of the laparoscopic approach. Robotic gastrectomy will probably improve outcomes obtained with laparoscopy. However, high cost is still a barrier to its use on a large scale. A cirurgia minimamente invasiva amplamente usada para tratar doenças benignas do aparelho digestivo, tornou-se o foco de intenso estudo nos últimos anos no campo da oncologia cirúrgica. Desde então, a experiência com este tipo de abordagem tem crescido, com o objetivo de fornecer os mesmos resultados oncológicos e sobrevivência à cirurgia convencional. Em relação ao câncer gástrico, o tratamento cirúrgico ainda é considerado o único tratamento curativo, considerando a extensão da ressecção e linfadenectomia realizada. A gastrectomia convencional continua a ser a principal modalidade realizada em todo o mundo. Não obstante, o papel do acesso minimamente invasivo tem ainda de ser esclarecido. Avaliar e resumir o estado atual da ressecção minimamente invasiva do câncer gástrico. Foi realizada revisão da literatura utilizando as bases Medline/PubMed, Cochrane Library e SciELO com os seguintes descritores: câncer gástrico, cirurgia minimamente invasiva, gastrectomia robótica, gastrectomia laparoscópica, neoplasia de estômago. A língua usada para a pesquisa foi o inglês. Foram considerados para elaboração desta revisão 28 artigos, entre eles ensaios clínicos randomizados, metanálises, estudos coorte prospectivos e retrospectivos. A gastrectomia minimamente invasiva é opção técnica no tratamento do câncer gástrico precoce. Quanto ao câncer avançado, estudos recentes têm demonstrado a segurança e a viabilidade do acesso videolaparoscópico. A gastrectomia robótica provavelmente melhorará os resultados obtidos com a laparoscopia. Porém, o alto custo ainda é impedimento para sua utilização em larga escala.

Cultural adaptation and validation of an instrument on barriers for the use of research results.

PubMed

Ferreira, Maria Beatriz Guimarães; Haas, Vanderlei José; Dantas, Rosana Aparecida Spadoti; Felix, Márcia Marques Dos Santos; Galvão, Cristina Maria

2017-03-02

to culturally adapt The Barriers to Research Utilization Scale and to analyze the metric validity and reliability properties of its Brazilian Portuguese version. methodological research conducted by means of the cultural adaptation process (translation and back-translation), face and content validity, construct validity (dimensionality and known groups) and reliability analysis (internal consistency and test-retest). The sample consisted of 335 nurses, of whom 43 participated in the retest phase. the validity of the adapted version of the instrument was confirmed. The scale investigates the barriers for the use of the research results in clinical practice. Confirmatory factorial analysis demonstrated that the Brazilian Portuguese version of the instrument is adequately adjusted to the dimensional structure the scale authors originally proposed. Statistically significant differences were observed among the nurses holding a Master's or Doctoral degree, with characteristics favorable to Evidence-Based Practice, and working at an institution with an organizational cultural that targets this approach. The reliability showed a strong correlation (r ranging between 0.77 and 0.84, p<0.001) and the internal consistency was adequate (Cronbach's alpha ranging between 0.77 and 0.82). the Brazilian Portuguese version of The Barriers Scale was valid and reliable in the group studied. efectuar la adaptación cultural del instrumento The Barriers to Research Utilization Scale, y analizar propiedades métricas de validez y confiabilidad de su versión para portugués brasileño. investigación metodológica conducida mediante el proceso de adaptación cultural (traducción y retrotraducción), validez de faz y contenido, validez de constructo (dimensionalidad y grupos conocidos) y análisis de fiabilidad (consistencia interna y test-retest). La muestra incluyó 335 enfermeros, de los cuales 43 participaron de la etapa retest. la validez de la versión adaptada del instrumento fue confirmada, la escala investiga las barreras para la utilización de resultados de investigación en la práctica clínica. El análisis factorial confirmatorio demostró que la versión del instrumento para el portugués brasileño está adecuadamente ajustado a la estructura dimensional originalmente propuesta por los autores de la escala. Fueron observadas diferencias estadísticamente significantes entre los enfermeros con título de maestría o doctorado, con características favorables a la Práctica Basada en Evidencias, y actuantes en institución con cultura organizacional dirigida hacia tal aproximación. La fiabilidad presentó correlación fuerte (r variando entre 0,77 y 0,84, p<0,001) y la consistencia interna fue adecuada (alfa de Cronbach variando entre 0,77 y 0,82). la versión para el portugués brasileño del instrumento The Barriers Scale se mostró válida y confiable en el grupo estudiado. realizar adaptação cultural do instrumento The Barriers to Research Utilization Scale, e analisar propriedades métricas de validade e confiabilidade da sua versão para o português brasileiro. pesquisa metodológica conduzida por meio do processo de adaptação cultural (tradução e retrotradução), validade de face e conteúdo, validade de construto (dimensionalidade e grupos conhecidos) e análise da confiabilidade (consistência interna e teste-reteste). A amostra foi composta de 335 enfermeiros, desses, 43 participaram da etapa reteste. a validade da versão adaptada do instrumento foi confirmada, a escala investiga as barreiras para a utilização de resultados de pesquisa na prática clínica. A análise fatorial confirmatória demonstrou que a versão do instrumento para o português brasileiro está adequadamente ajustada à estrutura dimensional originalmente proposta pelos autores da escala. Observou-se diferenças estatisticamente significantes entre os enfermeiros mestres ou doutores, com características favoráveis a Prática Baseada em Evidências, e atuantes em instituição com cultura organizacional direcionada para tal abordagem. A confiabilidade apresentou correlação forte (r variando entre 0,77e 0,84, p<0,001) e a consistência interna foi adequada (alfa de Cronbach variando entre 0,77 e 0,82) . a versão para o português brasileiro do instrumento The Barriers Scale demonstrou-se válida e confiável no grupo estudado.

Silver segregation in Ag/a-C nanocomposite coatings for potential application as antibacterial surfaces

NASA Astrophysics Data System (ADS)

Manninen, Noora Kristiina Alves de Sousa

O desenvolvimento de superficies antibacterianas representa um desafio atual em diferentes aplicacoes industriais, nomeadamente, dispositivos medicos, embalagens alimentares, texteis e sistemas de tratamento de agua. A maioria das bacterias existe em biofilmes que aderem fortemente a diferentes tipos de superficies uma vez que esta adesao representa um mecanismo estrategico de sobrevivencia. O fenomeno da adesao e colonizacao microbiana resulta na falha de diferentes dispositivos e componentes utilizados nas aplicacoes acima mencionadas, tendo como consequencia perdas economicas elevadas e representando tambem um problema de saude publica quando se tratam de aplicacoes como dispositivos medicos ou embalagens alimentares. Neste sentido, ao longo das ultimas decadas o desenvolvimento de superficies antibacterianas tem sido considerada uma estrategia emergente no desenvolvimento de materiais mais eficientes a serem aplicados em diferentes sectores. O objetivo da presente tese consiste no desenvolvimento e caracterizacao de revestimentos nanocompositos multifuncionais baseados em revestimentos de carbono amorfo dopado com nanoparticulas de prata (Ag/a-C) para potencial aplicacao em superficies antibacterianas. A Ag e atualmente considerada como o agente bactericida mais promissor e eficiente, sendo que as nanoparticulas de prata representam o material mais comercializado na area da nanotecnologia. A estrategia de modificacao superficial com revestimentos baseados em carbono amorfo (a-C) tem-se tornado popular do ponto de vista industrial essencialmente, devido entre outras propriedades, a sua resistencia ao desgaste tribologico excecional, que permite combinar uma elevada dureza com um baixo coeficiente de atrito, elevada estabilidade quimica, resistencia a corrosao e biocompatibilidade em diferentes aplicacoes biomedicas. Na atualidade os revestimentos de a-C sao utilizados em diferentes aplicacoes industriais nomeadamente dispositivos medicos, laminas de barbear e diferentes componentes mecanicos sujeitos a elevado desgaste tribologico. Neste sentido, a combinacao das propriedades intrinsecas destes materiais pode ser considerada uma abordagem promissora para o desenvolvimento de revestimentos multifuncionais, os quais podem ser aplicados em diferentes produtos, nomeadamente, dispositivos medicos. Na presente tese os revestimentos nanocompositos de Ag/a-C sao depositados por dois metodos distintos: (i) pulverizacao catodica em magnetrao e (ii) combinacao da pulverizacao catodica em magnetrao para deposicao da camada de a-C e condensacao em atmosfera inerte para a incorporacao simultanea de nanoparticulas de Ag na matrix de carbono. Os metodos acima mencionados sao comparados em relacao a uniformidade dos revestimentos depositados, permitindo efetuar a escolha do metodo de deposicao mais eficaz (pulverizacao catodica em magnetrao). Os revestimentos nanocompositos de Ag/a-C sao caraterizados relativamente a sua estrutura, estabilidade termodinamica em condicoes ambientais e propriedades funcionais (comportamento tribologico e atividade antibacteriana). O trabalho central da tese e focado na caraterizacao de revestimentos Ag/a-C contendo 20% at. de Ag, com diferentes espessuras e diferentes estruturas em multicamada. Os resultados sugerem que os revestimentos Ag/a-C sao instaveis mesmo em condicoes ambientais, sendo observado que a Ag e forma nanofibras entre as fronteiras das colunas, as quais recobrem a superficie do revestimento poucas semanas apos a producao. O processo de formacao de nanofibras e promovido pela humidade, sendo que, as particulas crescem atraves de um processo de coalescencia. As propriedades funcionais sugerem que os revestimentos Ag/a-C sao promissores do ponto de vista de actividade antibacteriana, a qual esta relacionada com a sua ionizacao. Os testes tribologicos revelam que em ambiente nao lubrificado a presenca da Ag promove a degradacao dos revestimentos a-C, contudo, em meios biologicos que simulam o liquido sinovial, presente nas articulacoes da anca, o comportamento tribologico e semelhante aos revestimentos a-C.

Urban versus rural lifestyle in adolescents: associations between environment, physical activity levels and sedentary behavior.

PubMed

Regis, Manuela Ferreira; Oliveira, Luciano Machado Ferreira Tenório de; Santos, Ana Raquel Mendes Dos; Leonidio, Ameliane da Conceição Reubens; Diniz, Paula Rejane Beserra; Freitas, Clara Maria Silvestre Monteiro de

2016-01-01

To analyze the levels of physical activity and sedentary behavior in adolescents living in urban and rural areas. An epidemiological, cross-section study with quantitative design, carried out at the regional level. The sample comprised 6,234 students aged 14 to 19 years, selected using random cluster sampling. The χ2 test and binary logistic regression were used in the analysis. A total of 74.5% of adolescents lived in urban areas. After adjustment, rural residents spent less time watching television (odds ratio - OR: 0.45; 95% confidence interval - 95%CI: 0.39-0.52), using a computer and/or playing video games (OR: 0.30; 95%CI: 0.22-0.42), or sitting down (OR: 0.66; 95%CI: 0.54-0.80); chose passive leisure less often (OR: 0.83; 95%IC: 0.72-0.95) and were less likely to be classified as insufficiently active (OR: 0.88; 95%IC: 0.78-0.99) when compared to urban residents, regardless of sex or age. The fact that adolescents living in rural areas who did not work were more likely to be classified as insufficiently active (OR: 2.59; 95%CI: 2.07-3.24) emphasized the significant role of occupation in physical activity levels in this group. Adolescents living in rural areas were less exposed to the sedentary behaviors, chose more active leisure, and had higher levels of physical activity. Place of residence and occupation may play a major role in youth lifestyle. Analisar os níveis de atividade física e o comportamento sedentário em adolescentes das áreas urbanas e rurais. Estudo epidemiológico, transversal, com abordagem quantitativa e abrangência estadual, cuja amostra foi constituída por 6.234 estudantes (14 a 19 anos), selecionados por meio de uma estratégia de amostragem aleatória de conglomerados. As análises foram realizadas por meio do teste χ2 e da regressão logística binária. Na amostra, 74,5% dos adolescentes eram residentes em área urbana. Após o ajuste, constatou-se que os adolescentes oriundos da área rural usavam menos televisão (odds ratio - OR: 0,45; intervalo de confiança de 95% - IC95%: 0,39-0,52), computador e/ou videogame (OR: 0,30; IC95%: 0,22-0,42), passavam menos tempo sentados (OR: 0,66; IC95%: 0,54-0,80), optaram menos pelo lazer passivo (OR: 0,83; IC95%: 0,72-0,95) e tinham menos chances de serem classificados como insuficientes ativos (OR: 0,88; IC95%: 0,78-0,99), quando comparados àqueles que residiam na área urbana, independentemente do sexo e da idade. Os adolescentes da área rural que não trabalhavam apresentaram mais chances de serem classificados como insuficientemente ativos (OR: 2,59; IC95%: 2,07-3,24), mostrando que a ocupação tinha um papel importante no nível de atividade física deste grupo. Os adolescentes residentes na área rural estiveram menos expostos aos comportamentos sedentários, optaram mais por um lazer ativo e apresentaram um melhor nível de atividade física, podendo a zona de domicílio e a ocupação influenciar no estilo de vida deles.

Astronomy in the Classroom: Why? (Spanish Title: Astronomía en la Clase: ¿Por Qué?) Astronomia na Sala de Aula: Por Quê?

NASA Astrophysics Data System (ADS)

Daros Gama, Leandro; Bagdonas Henrique, Alexandre

2010-07-01

There are many discussions about the relevance of the topics covered in classes. One subject in particular is the focus of this essay: astronomy. In what sense and to what extent it would be worth to teach it in science or other kind of classes? In this paper we discuss some aspects of the advantages of dealing with this area of knowledge in schools, taking into account the epistemological and axiological dimensions of astronomy, in light of the vision of science as an intelligent dialogue with the world (Bachelard), in addition to the "problematization" knowledge of Paulo Freire. We propose that in fact the Astronomy does not need to be seen as just a new set of contents to be taught, but appears as a set of motivational contents for historical-philosophical discussions, and permit the discussion of concepts of other disciplines. Numerosas discusiones se están llevando a cabo acerca de la pertinencia de los temas tradicionalmente tratados en las clases. Uno de los temas, en particular, es el foco de este ensayo: la astronomía. ¿En qué sentido y en qué medida sería conveniente tratarla en clase, ya sea en clases de ciencias naturales, específicamente en las de astronomía o asignaturas afines? Elaboramos en este artículo algunos aspectos de las ventajas de tratar esta área del conocimiento en las escuelas, teniendo en cuenta las dimensiones epistemológica y axiológica de la astronomía, a la luz de la visión de la ciencia como un diálogo inteligente con el mundo (Bachelard), además de la propuesta del conocimiento "problematizador" de Paulo Freire. Proponemos que en realidad la astronomía no tiene por qué ser vista sólo como un nuevo conjunto de contenidos que se enseñan, sino que aparece como un conjunto de temas de motivación para el debate histórico-filosófico y para permitir la discusión de los conceptos típicos de otras disciplinas. Muitas discussões vêm acontecendo sobre a relevância dos temas abordados em sala de aula. Um tema, em particular, é foco deste ensaio: a astronomia. Em que sentido e em que medida valeria a pena abordá-la em aulas, seja de ciências, seja de astronomia especificamente, ou em disciplinas afins? Discutimos neste texto alguns aspectos das vantagens de se tratar essa área do conhecimento nas escolas, levando em conta as dimensões epistemológica e axiológica da astronomia, à luz da visão da ciência como um diálogo inteligente com o mundo, de Bachelard, além da proposta de problematização do conhecimento, de Paulo Freire. Proporemos que de fato a astronomia não precisa ser vista como apenas um novo conjunto de conteúdos a serem ensinados, mas figura como conjunto de temas motivadores para discussões histórico-filosóficas, além de permitir a abordagem de conceitos típicos de outras disciplinas.

Development and validation of the Hospitality Axiological Scale for Humanization of Nursing Care.

PubMed

Galán González-Serna, José María; Ferreras-Mencia, Soledad; Arribas-Marín, Juan Manuel

2017-08-03

to develop and validate a scale to evaluate nursing attitudes in relation to hospitality for the humanization of nursing care. Participants: the sample consisted of 499 nursing professionals and undergraduate students of the final two years of the Bachelor of Science in Nursing program. the instrument has been developed and validated to evaluate the ethical values related to hospitality using a methodological approach. Subsequently, a model was developed to measure the dimensions forming the construct hospitality. the Axiological Hospitality Scale showed a high internal consistency, with Cronbach's Alpha=0.901. The validation of the measuring instrument was performed using factorial, exploratory and confirmatory analysis techniques with high goodness of fit measures. the developed instrument showed an adequate validity and a high internal consistency. Based on the consistency of its psychometric properties, it is possible to affirm that the scale provides a reliable measurement of the hospitality. It was also possible to determine the dimensions or sources that embrace it: respect, responsibility, quality and transpersonal care. desenvolver e validar uma escala que permita avaliar a atitude dos enfermeiros em termos de hospitalidade, visando a humanização da enfermagem.Participantes: a amostra foi constituída por 499 profissionais e estudantes de enfermagem dos dois últimos anos do curso de graduação em Enfermagem. utilizando-seuma abordagem metodológica, foi desenvolvido e validado um instrumento para avaliar os valores éticos relacionados com a hospitalidade. Subsequentemente, foi formulado um modelo para mediras dimensões que constituem o construto hospitalidade. a Escala Axiológica de Hospitalidade mostrou uma consistência interna elevada, com Alfa de Cronbach=0,901. A validação do instrumento de medição foi realizada usando-se métodos de análise fatorial, exploratória e confirmatória, que apresentaram bons índices de qualidade de ajuste. o instrumento desenvolvido apresentou uma validade adequada e uma consistência interna elevada. Com base na consistência de suas propriedades psicométricas, é possível afirmar que a escala proporciona uma medida confiável da hospitalidade. Também foi possível determinar as dimensões ou fontes que a compõem: o respeito, a responsabilidade, a qualidade e o cuidado transpessoal. desarrollar y validar una escala que permita evaluar la actitud enfermera ante la hospitalidad para la humanización de enfermería. Participantes: la muestra la componen 499 profesionales de enfermería y estudiantes de los dos últimos niveles académicos de la titulación de Grado en Enfermería. mediante abordaje metodológico, se ha desarrollado y validado un instrumento para evaluar valores éticos relacionados con la hospitalidad. Posteriormente, se ha formulado un modelo de medida de las dimensiones que conforman el constructo hospitalidad. la Escala Axiológica de la Hospitalidad ha mostrado una alta consistencia interna, con un Alfa de Cronbach=0.901. La validación del instrumento de medida se realizó mediante las técnicas de análisis factorial, exploratorio y confirmatorio, que presentaron unos buenos índices de bondad de ajuste. el instrumento desarrollado ha presentado una adecuada validez y una alta consistencia interna. Sus adecuadas propiedades psicométricas permiten afirmar que la escala aporta una medición fiable de la hospitalidad. También ha permitido determinar las dimensiones o fuentes que la conforman: el respeto, la responsabilidad, la calidad y el cuidado transpersonal.

Accuracy of probabilistic and deterministic record linkage: the case of tuberculosis.

PubMed

Oliveira, Gisele Pinto de; Bierrenbach, Ana Luiza de Souza; Camargo, Kenneth Rochel de; Coeli, Cláudia Medina; Pinheiro, Rejane Sobrino

2016-08-22

To analyze the accuracy of deterministic and probabilistic record linkage to identify TB duplicate records, as well as the characteristics of discordant pairs. The study analyzed all TB records from 2009 to 2011 in the state of Rio de Janeiro. A deterministic record linkage algorithm was developed using a set of 70 rules, based on the combination of fragments of the key variables with or without modification (Soundex or substring). Each rule was formed by three or more fragments. The probabilistic approach required a cutoff point for the score, above which the links would be automatically classified as belonging to the same individual. The cutoff point was obtained by linkage of the Notifiable Diseases Information System - Tuberculosis database with itself, subsequent manual review and ROC curves and precision-recall. Sensitivity and specificity for accurate analysis were calculated. Accuracy ranged from 87.2% to 95.2% for sensitivity and 99.8% to 99.9% for specificity for probabilistic and deterministic record linkage, respectively. The occurrence of missing values for the key variables and the low percentage of similarity measure for name and date of birth were mainly responsible for the failure to identify records of the same individual with the techniques used. The two techniques showed a high level of correlation for pair classification. Although deterministic linkage identified more duplicate records than probabilistic linkage, the latter retrieved records not identified by the former. User need and experience should be considered when choosing the best technique to be used. Analisar a acurácia das técnicas determinística e probabilística para identificação de registros duplicados de tuberculose, assim como as características dos pares discordantes. Foram analisados todos os registros de tuberculose no período de 2009 a 2011 do estado do Rio de Janeiro. Foi desenvolvido algoritmo para relacionamento determinístico, usando conjunto de 70 regras, a partir da combinação de fragmentos das variáveis-chave com ou sem modificações (Soundex ou substring). Cada regra era formada por três ou mais fragmentos. Para a abordagem probabilística, foi necessário estabelecer ponto de corte para o escore, acima do qual os links seriam classificados automaticamente como pertencentes ao mesmo indivíduo. O ponto de corte foi obtido por meio do relacionamento da base de dados Sistema de Informação de Agravos de Notificação - Tuberculose com ela mesma, posterior revisão manual e curvas ROC e precision-recall. Foram calculadas a sensibilidade e especificidade para análise de acurácia. A acurácia variou de 87,2% a 95,2% para sensibilidade e 99,8% a 99,9% para especificidade para as técnicas probabilística e determinística, respectivamente. A presença de valores faltantes para as variáveis-chave e o baixo percentual da medida de similaridade para o nome e data de nascimento foram os principais responsáveis pela não identificação dos registros do mesmo indivíduo pelas técnicas utilizadas. As duas técnicas apresentam alta concordância para a classificação como par. Apesar de a técnica determinística ter identificado mais registros duplicados que a probabilística, a segunda recuperou registros não identificados pela primeira. A necessidade e a experiência do usuário devem ser consideradas para a escolha da técnica a ser utilizada.

Phenotypes of asthma in low-income children and adolescents: cluster analysis.

PubMed

Cabral, Anna Lucia Barros; Sousa, Andrey Wirgues; Mendes, Felipe Augusto Rodrigues; Carvalho, Celso Ricardo Fernandes de

2017-01-01

Studies characterizing asthma phenotypes have predominantly included adults or have involved children and adolescents in developed countries. Therefore, their applicability in other populations, such as those of developing countries, remains indeterminate. Our objective was to determine how low-income children and adolescents with asthma in Brazil are distributed across a cluster analysis. We included 306 children and adolescents (6-18 years of age) with a clinical diagnosis of asthma and under medical treatment for at least one year of follow-up. At enrollment, all the patients were clinically stable. For the cluster analysis, we selected 20 variables commonly measured in clinical practice and considered important in defining asthma phenotypes. Variables with high multicollinearity were excluded. A cluster analysis was applied using a twostep agglomerative test and log-likelihood distance measure. Three clusters were defined for our population. Cluster 1 (n = 94) included subjects with normal pulmonary function, mild eosinophil inflammation, few exacerbations, later age at asthma onset, and mild atopy. Cluster 2 (n = 87) included those with normal pulmonary function, a moderate number of exacerbations, early age at asthma onset, more severe eosinophil inflammation, and moderate atopy. Cluster 3 (n = 108) included those with poor pulmonary function, frequent exacerbations, severe eosinophil inflammation, and severe atopy. Asthma was characterized by the presence of atopy, number of exacerbations, and lung function in low-income children and adolescents in Brazil. The many similarities with previous cluster analyses of phenotypes indicate that this approach shows good generalizability. Estudos que caracterizam fenótipos de asma predominantemente incluem adultos ou foram realizados em crianças e adolescentes de países desenvolvidos; portanto, sua aplicabilidade em outras populações, tais como as de países em desenvolvimento, permanece indeterminada. Nosso objetivo foi determinar como crianças e adolescentes asmáticas de baixa renda no Brasil são distribuídos através de uma análise de clusters. Foram incluídos 306 crianças e adolescentes (6-18 anos de idade) com diagnóstico clínico de asma e sob tratamento médico por pelo menos um ano de acompanhamento. No momento da inclusão, todos os pacientes estavam clinicamente estáveis. Vinte variáveis comumente determinadas na prática clínica e consideradas importantes na definição dos fenótipos de asma foram selecionadas para a análise de clusters. As variáveis com alta multicolinearidade foram excluídas. Uma análise de clusters foi realizada utilizando-se um teste aglomerativo em duas etapas e log-likelihood distance measure. Três clusters foram definidos para nossa população. O cluster 1 (n = 94) incluiu indivíduos com função pulmonar normal, inflamação eosinofílica leve, poucas exacerbações, início mais tardio da asma e atopia leve. O cluster 2 (n = 87) incluiu pacientes com função pulmonar normal, número moderado de exacerbações, início precoce da asma, inflamação eosinofílica mais grave e atopia moderada. O cluster 3 (n = 108) incluiu pacientes com função pulmonar ruim, exacerbações frequentes, inflamação eosinofílica e atopia graves. A asma foi caracterizada por presença de atopia, número de exacerbações e função pulmonar em crianças e adolescentes de baixa renda no Brasil. As muitas semelhanças entre esta e outras análises de clusters de fenótipos indicam que essa abordagem apresenta boa generalização.

Prevalence and factors associated with human brucellosis in livestock professionals.

PubMed

Mufinda, Franco Cazembe; Boinas, Fernando; Nunes, Carla

2017-06-22

The objective of this study is to estimate the seroprevalence of human brucellosis in livestock professionals and analyze the factors associated with brucellosis focusing on sociodemographic variables and the variables of knowledge and practices related to the characteristics of the activities carried out in livestock. This is a cross-sectional seroepidemiological study with a population of 131 workers of butchers, slaughter rooms, and slaughterhouse and 192 breeders sampled randomly in Namibe province, Angola. The data were obtained from the collection of blood and use of questionnaires. The laboratory tests used were rose bengal and slow agglutination. The questionnaire allowed us to collect sociodemographic information and, specifically on brucellosis, it incorporated questions about knowledge, attitudes, and behaviors of livestock professionals. In addition to the descriptive statistical approach, we used the Chi-square test of independence, Fisher's test, and logistic regression models, using a significance level of 10%. The general weighted prevalence of brucellosis was 15.6% (95%CI 13.61-17.50), being it 5.3% in workers and 16.7% (95%CI 11.39-21.93) in breeders. The statistical significance was observed between human seroprevalence and category (worker and breeder) (p < 0.001) and education level (p = 0.032), start of activity (p = 0079), and service location (p = 0.055). In a multivariate context, the positive factor associated with brucellosis in professionals was the professional category (OR = 3.54; 95%CI 1.57-8.30, related to breeders in relation to workers). Human brucellosis in livestock professionals is prevalent in Namibe province (15.6%), where the professional category was the most important factor. The seroprevalence levels detected are high when compared with those found in similar studies. Estimar a seroprevalência da brucelose humana em profissionais da pecuária e analisar os factores associados à brucelose com foco em variáveis sociodemográficas, de conhecimento e práticas relativas às características das actividades desenvolvidas na pecuária. Estudo transversal seroepidemiológico em população de 131 trabalhadores de talhos, salas de abate e matadouro e 192 criadores amostrados aleatoriamente na província do Namibe, Angola. Os dados foram obtidos por meio de colheita de sangue e aplicação de questionário. Os testes laboratoriais utilizados foram o Rosa de Bengala e a aglutinação lenta em tubos. O questionário permitiu recolher informação sociodemográfica e, especificamente sobre a brucelose, incorporou questões sobre conhecimento, atitudes e comportamentos dos profissionais da pecuária. Além da abordagem estatística descritiva, foram utilizados os testes de Independência do Qui-quadrado, Fisher e modelos de regressão logística, utilizando um nível de significância de 10%. A prevalência geral ponderada da brucelose foi de 15.6% (IC95% 13.61-17.50), sendo 5.3% em trabalhadores e 16.7% (IC95% 11.39-21.93) em criadores. A significância estatística foi observada entre a seroprevalência humana e a categoria (trabalhador e criador) (p < 0.001) e o nível de instrução (p = 0.032), início de actividade (p = 0.079) e local de serviço (p = 0.055). Em um contexto multivariado, o factor positivamente associado à brucelose em profissionais foi a categoria profissional (OR = 3.54; IC95% 1.57-8.30, relativo aos criadores em relação a trabalhadores). A brucelose humana em profissionais da pecuária é prevalente na província do Namibe (15.6%), onde a categoria profissional foi o factor mais relevante. Os níveis de seroprevalência detectados são elevados se comparados com outros encontrados em estudos semelhantes.

Evaluation of thermochemical biomass conversion in fluidized bed =

NASA Astrophysics Data System (ADS)

Neves, Daniel dos Santos Felix das

Dado o aumento acelerado dos precos dos combustiveis fosseis e as incertezas quanto a sua disponibilidade futura, tem surgido um novo interesse nas tecnologias da biomassa aplicadas a producao de calor, eletricidade ou combustiveis sinteticos. Nao obstante, para a conversao termoquimica de uma particula de biomassa solida concorrem fenomenos bastante complexos que levam, em primeiro lugar, a secagem do combustivel, depois a pirolise e finalmente a combustao ou gasificacao propriamente ditas. Uma descricao relativamente incompleta de alguns desses estagios de conversao constitui ainda um obstaculo ao desenvolvimento das tecnologias que importa ultrapassar. Em particular, a presenca de elevados conteudos de materia volatil na biomassa poe em evidencia o interesse pratico do estudo da pirolise. A importância da pirolise durante a combustao de biomassa foi evidenciada neste trabalho atraves de ensaios realizados num reator piloto de leito fluidizado borbulhante. Verificou-se que o processo ocorre em grande parte a superficie do leito com chamas de difusao devido a libertacao de volateis, o que dificulta o controlo da temperatura do reator acima do leito. No caso da gasificacao de biomassa a pirolise pode inclusivamente determinar a eficiencia quimica do processo. Isso foi mostrado neste trabalho durante ensaios de gasificacao num reator de leito fluidizado de 2MWth, onde um novo metodo de medicao permitiu fechar o balanco de massa ao gasificador e monitorizar o grau de conversao da biomassa. A partir destes resultados tornou-se clara a necessidade de descrever adequadamente a pirolise de biomassa com vista ao projeto e controlo dos processos. Em aplicacoes de engenharia ha particular interesse na estequiometria e propriedades dos principais produtos piroliticos. Neste trabalho procurou-se responder a esta necessidade, inicialmente atraves da estruturacao de dados bibliograficos sobre rendimentos de carbonizado, liquidos piroliticos e gases, assim como composicoes elementares e poderes calorificos. O resultado traduziu-se num conjunto de parâmetros empiricos de interesse pratico que permitiram elucidar o comportamento geral da pirolise de biomassa numa gama ampla de condicoes operatorias. Para alem disso, propos-se um modelo empirico para a composicao dos volateis que pode ser integrado em modelos compreensivos de reatores desde que os parâmetros usados sejam adequados ao combustivel ensaiado. Esta abordagem despoletou um conjunto de ensaios de pirolise com varias biomassas, lenhina e celulose, e temperaturas entre os 600 e 975ºC. Elevadas taxas de aquecimento do combustivel foram alcancadas em reatores laboratoriais de leito fluidizado borbulhante e leito fixo, ao passo que um sistema termo-gravimetrico permitiu estudar o efeito de taxas de aquecimento mais baixas. Os resultados mostram que, em condicoes tipicas de processos de combustao e gasificacao, a quantidade de volateis libertada da biomassa e pouco influenciada pela temperatura do reator mas varia bastante entre combustiveis. Uma analise mais aprofundada deste assunto permitiu mostrar que o rendimento de carbonizado esta intimamente relacionado com o racio O/C do combustivel original, sendo proposto um modelo simples para descrever esta relacao. Embora a quantidade total de volateis libertada seja estabelecida pela composicao da biomassa, a respetiva composicao quimica depende bastante da temperatura do reator. Rendimentos de especies condensaveis (agua e especies orgânicas), CO2 e hidrocarbonetos leves descrevem um maximo relativamente a temperatura para dar lugar a CO e H2 as temperaturas mais altas. Nao obstante, em certas gamas de temperatura, os rendimentos de algumas das principais especies gasosas (e.g. CO, H2, CH4) estao bem correlacionados entre si, o que permitiu desenvolver modelos empiricos que minimizam o efeito das condicoes operatorias e, ao mesmo tempo, realcam o efeito do combustivel na composicao do gas. Em suma, os ensaios de pirolise realizados neste trabalho permitiram constatar que a estequiometria da pirolise de biomassa se relaciona de varias formas com a composicao elementar do combustivel original o que levanta varias possibilidades para a avaliacao e projeto de processos de combustao e gasificacao de biomassa.

Life-cycle optimization model for distributed generation in buildings

NASA Astrophysics Data System (ADS)

Safaei, Amir

O setor da construcao e responsavel por uma grande parte do consumo de energia e emissoes na Uniao Europeia. A Geracao Distribuida (GD) de energia, nomeadamente atraves de sistemas de cogeracao e tecnologias solares, representa um papel importante no futuro energetico deste setor. A otimizacao do funcionamento dos sistemas de cogeracao e uma tarefa complexa, devido as diversas variaveis em jogo, designadamente: os diferentes tipos de necessidades energeticas (eletricidade, aquecimento e arrefecimento), os precos dinamicos dos combustiveis (gas natural) e da eletricidade, e os custos fixos e variaveis dos diferentes sistemas de GD. Tal torna-se mais complexo considerando a natureza flutuante das tecnologias solares termicas e fotovoltaicas. Ao mesmo tempo, a liberalizacao do mercado da eletricidade permite exportar para a rede, a electricidade gerada localmente. Adicionalmente, a operacao estrategica de um sistema de GD deve atender aos quadros politicos nacionais, se tiver como objetivo beneficiar de tais regimes. Alem disso, considerando os elevados impactes ambientais do setor da construcao, qualquer avaliacao energetica de edificios rigorosa deve tambem integrar aspetos ambientais, utilizando uma abordagem de Ciclo de Vida (CV). Uma avaliacao de Ciclo de Vida (ACV) completa de um sistema de GD deve incluir as fases relativas a operacao e construcao do sistema, bem como os impactes associados a producao dos combustiveis. Foram analisadas as emissoes da producao de GN, as quais variam de acordo com a origem, tipo (convencional ou nao-convencional), e estado (na forma de GN Liquefeito (GNL) ou gas). Do mesmo modo, o impacte dos sistemas solares e afetado pela meteorologia e radiacao solar, de acordo com a sua localizacao geografica. Sendo assim, uma avaliacao adequada dos sistemas de GD exige um modelo de ACV adequado a localizacao geografica (Portugal), integrando tambem a producao de combustivel (GN), tendo em conta as suas diferentes fontes de abastecimento. O principal objetivo desta tese de doutoramento foi desenvolver um modelo para otimizar o desenho e operacao de sistemas de GD para o setor da construcao de edificios comerciais em Portugal, considerando os respetivos Impactes de Ciclo de Vida (IAVC) e Custos de Ciclo de Vida (CCV), de modo a satisfazer as necessidades energeticas do edificio. Tres tipos de tecnologias de cogeracao (Micro-Turbinas, Motores de combustao interna, e Celulas combustiveis de Oxido solido), e dois tipos de tecnologias de energia solar, solar termica e fotovoltaica, constituem os sistemas de GD que sao acoplados aos sistemas convencionais. Foi desenvolvido um modelo de CV, tendo em conta todos os impactes relacionados com a construcao e operacao dos sistemas de energia, bem como os processos a montante relacionados com a producao do GN. Em particular, o mix de GN consumido em Portugal em 2011 foi identificado (60% da Nigeria, 40% da Argelia) e os impactes relativos a cada uma das vias de abastecimento foram avaliados separadamente para quatro categorias de impacte ambiental: Consumo de Energia Primaria (CEP), Gases com Efeito de Estufa (GEE), acidificacao, e eutrofizacao. Devido a importancia das emissoes de GEE na formulacao de politicas, foi tambem realizada uma analise de incerteza as emissoes de GEE do GN fornecido a Portugal. Foi desenvolvido um modelo matematico, em linguagem de Programacao General Algebraic Modeling System (GAMS), que utiliza os resultados da ACV dos sistemas de energia e as suas implicacoes economicas para minimizar o CCV e IACV ao longo de um horizonte de planeamento definido pelo decisor. Foram derivadas fronteiras otimas de Pareto, representando as relacoes entre o tipo de IACV (CEP, GEE, acidificacao, eutrofizacao) e CCV decorrentes da satisfacao das necessidades energeticas do edificio. Para aumentar a robustez do modelo, dada a incerteza dos precos dos combustiveis (GN e eletricidade), foi desenvolvido um modelo de custos robusto para os sistemas de GD, que e menos afetado por perturbacoes relativas aos custos de combustivel. A aplicacao do modelo proposto foi testada num caso de estudo real, um edificio comercial localizado na cidade de Coimbra, em Portugal.

Transforming Collaborative Process Models into Interface Process Models by Applying an MDA Approach

NASA Astrophysics Data System (ADS)

Lazarte, Ivanna M.; Chiotti, Omar; Villarreal, Pablo D.

Collaborative business models among enterprises require defining collaborative business processes. Enterprises implement B2B collaborations to execute these processes. In B2B collaborations the integration and interoperability of processes and systems of the enterprises are required to support the execution of collaborative processes. From a collaborative process model, which describes the global view of the enterprise interactions, each enterprise must define the interface process that represents the role it performs in the collaborative process in order to implement the process in a Business Process Management System. Hence, in this work we propose a method for the automatic generation of the interface process model of each enterprise from a collaborative process model. This method is based on a Model-Driven Architecture to transform collaborative process models into interface process models. By applying this method, interface processes are guaranteed to be interoperable and defined according to a collaborative process.

Extensible packet processing architecture

DOEpatents

Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

2013-08-20

A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

Processed and ultra-processed foods are associated with lower-quality nutrient profiles in children from Colombia.

PubMed

Cornwell, Brittany; Villamor, Eduardo; Mora-Plazas, Mercedes; Marin, Constanza; Monteiro, Carlos A; Baylin, Ana

2018-01-01

To determine if processed and ultra-processed foods consumed by children in Colombia are associated with lower-quality nutrition profiles than less processed foods. We obtained information on sociodemographic and anthropometric variables and dietary information through dietary records and 24 h recalls from a convenience sample of the Bogotá School Children Cohort. Foods were classified into three categories: (i) unprocessed and minimally processed foods, (ii) processed culinary ingredients and (iii) processed and ultra-processed foods. We also examined the combination of unprocessed foods and processed culinary ingredients. Representative sample of children from low- to middle-income families in Bogotá, Colombia. Children aged 5-12 years in 2011 Bogotá School Children Cohort. We found that processed and ultra-processed foods are of lower dietary quality in general. Nutrients that were lower in processed and ultra-processed foods following adjustment for total energy intake included: n-3 PUFA, vitamins A, B12, C and E, Ca and Zn. Nutrients that were higher in energy-adjusted processed and ultra-processed foods compared with unprocessed foods included: Na, sugar and trans-fatty acids, although we also found that some healthy nutrients, including folate and Fe, were higher in processed and ultra-processed foods compared with unprocessed and minimally processed foods. Processed and ultra-processed foods generally have unhealthy nutrition profiles. Our findings suggest the categorization of foods based on processing characteristics is promising for understanding the influence of food processing on children's dietary quality. More studies accounting for the type and degree of food processing are needed.

Dynamic control of remelting processes

DOEpatents

Bertram, Lee A.; Williamson, Rodney L.; Melgaard, David K.; Beaman, Joseph J.; Evans, David G.

2000-01-01

An apparatus and method of controlling a remelting process by providing measured process variable values to a process controller; estimating process variable values using a process model of a remelting process; and outputting estimated process variable values from the process controller. Feedback and feedforward control devices receive the estimated process variable values and adjust inputs to the remelting process. Electrode weight, electrode mass, electrode gap, process current, process voltage, electrode position, electrode temperature, electrode thermal boundary layer thickness, electrode velocity, electrode acceleration, slag temperature, melting efficiency, cooling water temperature, cooling water flow rate, crucible temperature profile, slag skin temperature, and/or drip short events are employed, as are parameters representing physical constraints of electroslag remelting or vacuum arc remelting, as applicable.

On Intelligent Design and Planning Method of Process Route Based on Gun Breech Machining Process

NASA Astrophysics Data System (ADS)

Hongzhi, Zhao; Jian, Zhang

2018-03-01

The paper states an approach of intelligent design and planning of process route based on gun breech machining process, against several problems, such as complex machining process of gun breech, tedious route design and long period of its traditional unmanageable process route. Based on gun breech machining process, intelligent design and planning system of process route are developed by virtue of DEST and VC++. The system includes two functional modules--process route intelligent design and its planning. The process route intelligent design module, through the analysis of gun breech machining process, summarizes breech process knowledge so as to complete the design of knowledge base and inference engine. And then gun breech process route intelligently output. On the basis of intelligent route design module, the final process route is made, edited and managed in the process route planning module.

Gasoline from coal in the state of Illinois: feasibility study. Volume I. Design. [KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-01-01

Volume 1 describes the proposed plant: KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process, and also with ancillary processes, such as oxygen plant, shift process, RECTISOL purification process, sulfur recovery equipment and pollution control equipment. Numerous engineering diagrams are included. (LTN)

Performing a local reduction operation on a parallel computer

DOEpatents

Blocksome, Michael A; Faraj, Daniel A

2013-06-04

A parallel computer including compute nodes, each including two reduction processing cores, a network write processing core, and a network read processing core, each processing core assigned an input buffer. Copying, in interleaved chunks by the reduction processing cores, contents of the reduction processing cores' input buffers to an interleaved buffer in shared memory; copying, by one of the reduction processing cores, contents of the network write processing core's input buffer to shared memory; copying, by another of the reduction processing cores, contents of the network read processing core's input buffer to shared memory; and locally reducing in parallel by the reduction processing cores: the contents of the reduction processing core's input buffer; every other interleaved chunk of the interleaved buffer; the copied contents of the network write processing core's input buffer; and the copied contents of the network read processing core's input buffer.

Performing a local reduction operation on a parallel computer

DOEpatents

Blocksome, Michael A.; Faraj, Daniel A.

2012-12-11

A parallel computer including compute nodes, each including two reduction processing cores, a network write processing core, and a network read processing core, each processing core assigned an input buffer. Copying, in interleaved chunks by the reduction processing cores, contents of the reduction processing cores' input buffers to an interleaved buffer in shared memory; copying, by one of the reduction processing cores, contents of the network write processing core's input buffer to shared memory; copying, by another of the reduction processing cores, contents of the network read processing core's input buffer to shared memory; and locally reducing in parallel by the reduction processing cores: the contents of the reduction processing core's input buffer; every other interleaved chunk of the interleaved buffer; the copied contents of the network write processing core's input buffer; and the copied contents of the network read processing core's input buffer.

Situation awareness acquired from monitoring process plants - the Process Overview concept and measure.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-07-01

We introduce Process Overview, a situation awareness characterisation of the knowledge derived from monitoring process plants. Process Overview is based on observational studies of process control work in the literature. The characterisation is applied to develop a query-based measure called the Process Overview Measure. The goal of the measure is to improve coupling between situation and awareness according to process plant properties and operator cognitive work. A companion article presents the empirical evaluation of the Process Overview Measure in a realistic process control setting. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA based on data collected by process experts. Practitioner Summary: The Process Overview Measure is a query-based measure for assessing operator situation awareness from monitoring process plants in representative settings.

43 CFR 2804.19 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false How will BLM process my Processing... process my Processing Category 6 application? (a) For Processing Category 6 applications, you and BLM must enter into a written agreement that describes how BLM will process your application. The final agreement...

43 CFR 2804.19 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false How will BLM process my Processing... process my Processing Category 6 application? (a) For Processing Category 6 applications, you and BLM must enter into a written agreement that describes how BLM will process your application. The final agreement...

Process Correlation Analysis Model for Process Improvement Identification

PubMed Central

Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data. PMID:24977170

Process correlation analysis model for process improvement identification.

PubMed

Choi, Su-jin; Kim, Dae-Kyoo; Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data.

Cleanliness of Ti-bearing Al-killed ultra-low-carbon steel during different heating processes

NASA Astrophysics Data System (ADS)

Guo, Jian-long; Bao, Yan-ping; Wang, Min

2017-12-01

During the production of Ti-bearing Al-killed ultra-low-carbon (ULC) steel, two different heating processes were used when the converter tapping temperature or the molten steel temperature in the Ruhrstahl-Heraeus (RH) process was low: heating by Al addition during the RH decarburization process and final deoxidation at the end of the RH decarburization process (process-I), and increasing the oxygen content at the end of RH decarburization, heating and final deoxidation by one-time Al addition (process-II). Temperature increases of 10°C by different processes were studied; the results showed that the two heating processes could achieve the same heating effect. The T.[O] content in the slab and the refining process was better controlled by process-I than by process-II. Statistical analysis of inclusions showed that the numbers of inclusions in the slab obtained by process-I were substantially less than those in the slab obtained by process-II. For process-I, the Al2O3 inclusions produced by Al added to induce heating were substantially removed at the end of decarburization. The amounts of inclusions were substantially greater for process-II than for process-I at different refining stages because of the higher dissolved oxygen concentration in process-II. Industrial test results showed that process-I was more beneficial for improving the cleanliness of molten steel.

Application of agent-based system for bioprocess description and process improvement.

PubMed

Gao, Ying; Kipling, Katie; Glassey, Jarka; Willis, Mark; Montague, Gary; Zhou, Yuhong; Titchener-Hooker, Nigel J

2010-01-01

Modeling plays an important role in bioprocess development for design and scale-up. Predictive models can also be used in biopharmaceutical manufacturing to assist decision-making either to maintain process consistency or to identify optimal operating conditions. To predict the whole bioprocess performance, the strong interactions present in a processing sequence must be adequately modeled. Traditionally, bioprocess modeling considers process units separately, which makes it difficult to capture the interactions between units. In this work, a systematic framework is developed to analyze the bioprocesses based on a whole process understanding and considering the interactions between process operations. An agent-based approach is adopted to provide a flexible infrastructure for the necessary integration of process models. This enables the prediction of overall process behavior, which can then be applied during process development or once manufacturing has commenced, in both cases leading to the capacity for fast evaluation of process improvement options. The multi-agent system comprises a process knowledge base, process models, and a group of functional agents. In this system, agent components co-operate with each other in performing their tasks. These include the description of the whole process behavior, evaluating process operating conditions, monitoring of the operating processes, predicting critical process performance, and providing guidance to decision-making when coping with process deviations. During process development, the system can be used to evaluate the design space for process operation. During manufacture, the system can be applied to identify abnormal process operation events and then to provide suggestions as to how best to cope with the deviations. In all cases, the function of the system is to ensure an efficient manufacturing process. The implementation of the agent-based approach is illustrated via selected application scenarios, which demonstrate how such a framework may enable the better integration of process operations by providing a plant-wide process description to facilitate process improvement. Copyright 2009 American Institute of Chemical Engineers

Electricity from sunlight. [low cost silicon for solar cells

NASA Technical Reports Server (NTRS)

Yaws, C. L.; Miller, J. W.; Lutwack, R.; Hsu, G.

1978-01-01

The paper discusses a number of new unconventional processes proposed for the low-cost production of silicon for solar cells. Consideration is given to: (1) the Battelle process (Zn/SiCl4), (2) the Battelle process (SiI4), (3) the Silane process, (4) the Motorola process (SiF4/SiF2), (5) the Westinghouse process (Na/SiCl4), (6) the Dow Corning process (C/SiO2), (7) the AeroChem process (SiCl4/H atom), and the Stanford process (Na/SiF4). Preliminary results indicate that the conventional process and the SiI4 processes cannot meet the project goal of $10/kg by 1986. Preliminary cost evaluation results for the Zn/SiCl4 process are favorable.

Composing Models of Geographic Physical Processes

NASA Astrophysics Data System (ADS)

Hofer, Barbara; Frank, Andrew U.

Processes are central for geographic information science; yet geographic information systems (GIS) lack capabilities to represent process related information. A prerequisite to including processes in GIS software is a general method to describe geographic processes independently of application disciplines. This paper presents such a method, namely a process description language. The vocabulary of the process description language is derived formally from mathematical models. Physical processes in geography can be described in two equivalent languages: partial differential equations or partial difference equations, where the latter can be shown graphically and used as a method for application specialists to enter their process models. The vocabulary of the process description language comprises components for describing the general behavior of prototypical geographic physical processes. These process components can be composed by basic models of geographic physical processes, which is shown by means of an example.

Process-based tolerance assessment of connecting rod machining process

NASA Astrophysics Data System (ADS)

Sharma, G. V. S. S.; Rao, P. Srinivasa; Surendra Babu, B.

2016-06-01

Process tolerancing based on the process capability studies is the optimistic and pragmatic approach of determining the manufacturing process tolerances. On adopting the define-measure-analyze-improve-control approach, the process potential capability index ( C p) and the process performance capability index ( C pk) values of identified process characteristics of connecting rod machining process are achieved to be greater than the industry benchmark of 1.33, i.e., four sigma level. The tolerance chain diagram methodology is applied to the connecting rod in order to verify the manufacturing process tolerances at various operations of the connecting rod manufacturing process. This paper bridges the gap between the existing dimensional tolerances obtained via tolerance charting and process capability studies of the connecting rod component. Finally, the process tolerancing comparison has been done by adopting a tolerance capability expert software.

Intranode data communications in a parallel computer

DOEpatents

Archer, Charles J; Blocksome, Michael A; Miller, Douglas R; Ratterman, Joseph D; Smith, Brian E

2014-01-07

Intranode data communications in a parallel computer that includes compute nodes configured to execute processes, where the data communications include: allocating, upon initialization of a first process of a computer node, a region of shared memory; establishing, by the first process, a predefined number of message buffers, each message buffer associated with a process to be initialized on the compute node; sending, to a second process on the same compute node, a data communications message without determining whether the second process has been initialized, including storing the data communications message in the message buffer of the second process; and upon initialization of the second process: retrieving, by the second process, a pointer to the second process's message buffer; and retrieving, by the second process from the second process's message buffer in dependence upon the pointer, the data communications message sent by the first process.

Intranode data communications in a parallel computer

DOEpatents

Archer, Charles J; Blocksome, Michael A; Miller, Douglas R; Ratterman, Joseph D; Smith, Brian E

2013-07-23

Intranode data communications in a parallel computer that includes compute nodes configured to execute processes, where the data communications include: allocating, upon initialization of a first process of a compute node, a region of shared memory; establishing, by the first process, a predefined number of message buffers, each message buffer associated with a process to be initialized on the compute node; sending, to a second process on the same compute node, a data communications message without determining whether the second process has been initialized, including storing the data communications message in the message buffer of the second process; and upon initialization of the second process: retrieving, by the second process, a pointer to the second process's message buffer; and retrieving, by the second process from the second process's message buffer in dependence upon the pointer, the data communications message sent by the first process.

Canadian Libraries and Mass Deacidification.

ERIC Educational Resources Information Center

Pacey, Antony

1992-01-01

Considers the advantages and disadvantages of six mass deacidification processes that libraries can use to salvage printed materials: the Wei T'o process, the Diethyl Zinc (DEZ) process, the FMC (Lithco) process, the Book Preservation Associates (BPA) process, the "Bookkeeper" process, and the "Lyophilization" process. The…

A new process sensitivity index to identify important system processes under process model and parametric uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Heng; Ye, Ming; Walker, Anthony P.

Hydrological models are always composed of multiple components that represent processes key to intended model applications. When a process can be simulated by multiple conceptual-mathematical models (process models), model uncertainty in representing the process arises. While global sensitivity analysis methods have been widely used for identifying important processes in hydrologic modeling, the existing methods consider only parametric uncertainty but ignore the model uncertainty for process representation. To address this problem, this study develops a new method to probe multimodel process sensitivity by integrating the model averaging methods into the framework of variance-based global sensitivity analysis, given that the model averagingmore » methods quantify both parametric and model uncertainty. A new process sensitivity index is derived as a metric of relative process importance, and the index includes variance in model outputs caused by uncertainty in both process models and model parameters. For demonstration, the new index is used to evaluate the processes of recharge and geology in a synthetic study of groundwater reactive transport modeling. The recharge process is simulated by two models that converting precipitation to recharge, and the geology process is also simulated by two models of different parameterizations of hydraulic conductivity; each process model has its own random parameters. The new process sensitivity index is mathematically general, and can be applied to a wide range of problems in hydrology and beyond.« less

Depth-of-processing effects on priming in stem completion: tests of the voluntary-contamination, conceptual-processing, and lexical-processing hypotheses.

PubMed

Richardson-Klavehn, A; Gardiner, J M

1998-05-01

Depth-of-processing effects on incidental perceptual memory tests could reflect (a) contamination by voluntary retrieval, (b) sensitivity of involuntary retrieval to prior conceptual processing, or (c) a deficit in lexical processing during graphemic study tasks that affects involuntary retrieval. The authors devised an extension of incidental test methodology--making conjunctive predictions about response times as well as response proportions--to discriminate among these alternatives. They used graphemic, phonemic, and semantic study tasks, and a word-stem completion test with incidental, intentional, and inclusion instructions. Semantic study processing was superior to phonemic study processing in the intentional and inclusion tests, but semantic and phonemic study processing produced equal priming in the incidental test, showing that priming was uncontaminated by voluntary retrieval--a conclusion reinforced by the response-time data--and that priming was insensitive to prior conceptual processing. The incidental test nevertheless showed a priming deficit following graphemic study processing, supporting the lexical-processing hypothesis. Adding a lexical decision to the 3 study tasks eliminated the priming deficit following graphemic study processing, but did not influence priming following phonemic and semantic processing. The results provide the first clear evidence that depth-of-processing effects on perceptual priming can reflect lexical processes, rather than voluntary contamination or conceptual processes.

Improving operational anodising process performance using simulation approach

NASA Astrophysics Data System (ADS)

Liong, Choong-Yeun; Ghazali, Syarah Syahidah

2015-10-01

The use of aluminium is very widespread, especially in transportation, electrical and electronics, architectural, automotive and engineering applications sectors. Therefore, the anodizing process is an important process for aluminium in order to make the aluminium durable, attractive and weather resistant. This research is focused on the anodizing process operations in manufacturing and supplying of aluminium extrusion. The data required for the development of the model is collected from the observations and interviews conducted in the study. To study the current system, the processes involved in the anodizing process are modeled by using Arena 14.5 simulation software. Those processes consist of five main processes, namely the degreasing process, the etching process, the desmut process, the anodizing process, the sealing process and 16 other processes. The results obtained were analyzed to identify the problems or bottlenecks that occurred and to propose improvement methods that can be implemented on the original model. Based on the comparisons that have been done between the improvement methods, the productivity could be increased by reallocating the workers and reducing loading time.

Value-driven process management: using value to improve processes.

PubMed

Melnyk, S A; Christensen, R T

2000-08-01

Every firm can be viewed as consisting of various processes. These processes affect everything that the firm does from accepting orders and designing products to scheduling production. In many firms, the management of processes often reflects considerations of efficiency (cost) rather than effectiveness (value). In this article, we introduce a well-structured process for managing processes that begins not with the process, but rather with the customer and the product and the concept of value. This process progresses through a number of steps which include issues such as defining value, generating the appropriate metrics, identifying the critical processes, mapping and assessing the performance of these processes, and identifying long- and short-term areas for action. What makes the approach presented in this article so powerful is that it explicitly links the customer to the process and that the process is evaluated in term of its ability to effectively serve the customers.

Method for routing events from key strokes in a multi-processing computer systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhodes, D.A.; Rustici, E.; Carter, K.H.

1990-01-23

The patent describes a method of routing user input in a computer system which concurrently runs a plurality of processes. It comprises: generating keycodes representative of keys typed by a user; distinguishing generated keycodes by looking up each keycode in a routing table which assigns each possible keycode to an individual assigned process of the plurality of processes, one of which processes being a supervisory process; then, sending each keycode to its assigned process until a keycode assigned to the supervisory process is received; sending keycodes received subsequent to the keycode assigned to the supervisory process to a buffer; next,more » providing additional keycodes to the supervisory process from the buffer until the supervisory process has completed operation; and sending keycodes stored in the buffer to processes assigned therewith after the supervisory process has completedoperation.« less

Issues Management Process Course # 38401

DOE Office of Scientific and Technical Information (OSTI.GOV)

Binion, Ula Marie

The purpose of this training it to advise Issues Management Coordinators (IMCs) on the revised Contractor Assurance System (CAS) Issues Management (IM) process. Terminal Objectives: Understand the Laboratory’s IM process; Understand your role in the Laboratory’s IM process. Learning Objectives: Describe the IM process within the context of the CAS; Describe the importance of implementing an institutional IM process at LANL; Describe the process flow for the Laboratory’s IM process; Apply the definition of an issue; Use available resources to determine initial screening risk levels for issues; Describe the required major process steps for each risk level; Describe the personnelmore » responsibilities for IM process implementation; Access available resources to support IM process implementation.« less

Social network supported process recommender system.

PubMed

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

[Definition and stabilization of processes I. Management processes and support in a Urology Department].

PubMed

Pascual, Carlos; Luján, Marcos; Mora, José Ramón; Chiva, Vicente; Gamarra, Manuela

2015-01-01

The implantation of total quality management models in clinical departments can better adapt to the 2009 ISO 9004 model. An essential part of implantation of these models is the establishment of processes and their stabilization. There are four types of processes: key, management, support and operative (clinical). Management processes have four parts: process stabilization form, process procedures form, medical activities cost estimation form and, process flow chart. In this paper we will detail the creation of an essential process in a surgical department, such as the process of management of the surgery waiting list.

T-Check in Technologies for Interoperability: Business Process Management in a Web Services Context

DTIC Science & Technology

2008-09-01

UML Sequence Diagram) 6  Figure 3:   BPMN Diagram of the Order Processing Business Process 9  Figure 4:   T-Check Process for Technology Evaluation 10...Figure 5:  Notional System Architecture 12  Figure 6:  Flow Chart of the Order Processing Business Process 14  Figure 7:  Order Processing Activities...features. Figure 3 (created with Intalio BPMS Designer [Intalio 2008]) shows a BPMN view of the Order Processing business process that is used in the

A case study: application of statistical process control tool for determining process capability and sigma level.

PubMed

Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

2012-01-01

Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical process control study on process. Interpretation of such a study provides information about stability, process variability, changing of trends, and quantification of process ability against defective production. Comparative evaluation of critical quality attributes by Pareto charts provides the least capable and most variable process that is liable for improvement. Statistical process control thus proves to be an important tool for six sigma-capable process development and continuous quality improvement.

A practical approach for exploration and modeling of the design space of a bacterial vaccine cultivation process.

PubMed

Streefland, M; Van Herpen, P F G; Van de Waterbeemd, B; Van der Pol, L A; Beuvery, E C; Tramper, J; Martens, D E; Toft, M

2009-10-15

A licensed pharmaceutical process is required to be executed within the validated ranges throughout the lifetime of product manufacturing. Changes to the process, especially for processes involving biological products, usually require the manufacturer to demonstrate that the safety and efficacy of the product remains unchanged by new or additional clinical testing. Recent changes in the regulations for pharmaceutical processing allow broader ranges of process settings to be submitted for regulatory approval, the so-called process design space, which means that a manufacturer can optimize his process within the submitted ranges after the product has entered the market, which allows flexible processes. In this article, the applicability of this concept of the process design space is investigated for the cultivation process step for a vaccine against whooping cough disease. An experimental design (DoE) is applied to investigate the ranges of critical process parameters that still result in a product that meets specifications. The on-line process data, including near infrared spectroscopy, are used to build a descriptive model of the processes used in the experimental design. Finally, the data of all processes are integrated in a multivariate batch monitoring model that represents the investigated process design space. This article demonstrates how the general principles of PAT and process design space can be applied for an undefined biological product such as a whole cell vaccine. The approach chosen for model development described here, allows on line monitoring and control of cultivation batches in order to assure in real time that a process is running within the process design space.

Processing approaches to cognition: the impetus from the levels-of-processing framework.

PubMed

Roediger, Henry L; Gallo, David A; Geraci, Lisa

2002-01-01

Processing approaches to cognition have a long history, from act psychology to the present, but perhaps their greatest boost was given by the success and dominance of the levels-of-processing framework. We review the history of processing approaches, and explore the influence of the levels-of-processing approach, the procedural approach advocated by Paul Kolers, and the transfer-appropriate processing framework. Processing approaches emphasise the procedures of mind and the idea that memory storage can be usefully conceptualised as residing in the same neural units that originally processed information at the time of encoding. Processing approaches emphasise the unity and interrelatedness of cognitive processes and maintain that they can be dissected into separate faculties only by neglecting the richness of mental life. We end by pointing to future directions for processing approaches.

Global Sensitivity Analysis for Process Identification under Model Uncertainty

NASA Astrophysics Data System (ADS)

Ye, M.; Dai, H.; Walker, A. P.; Shi, L.; Yang, J.

2015-12-01

The environmental system consists of various physical, chemical, and biological processes, and environmental models are always built to simulate these processes and their interactions. For model building, improvement, and validation, it is necessary to identify important processes so that limited resources can be used to better characterize the processes. While global sensitivity analysis has been widely used to identify important processes, the process identification is always based on deterministic process conceptualization that uses a single model for representing a process. However, environmental systems are complex, and it happens often that a single process may be simulated by multiple alternative models. Ignoring the model uncertainty in process identification may lead to biased identification in that identified important processes may not be so in the real world. This study addresses this problem by developing a new method of global sensitivity analysis for process identification. The new method is based on the concept of Sobol sensitivity analysis and model averaging. Similar to the Sobol sensitivity analysis to identify important parameters, our new method evaluates variance change when a process is fixed at its different conceptualizations. The variance considers both parametric and model uncertainty using the method of model averaging. The method is demonstrated using a synthetic study of groundwater modeling that considers recharge process and parameterization process. Each process has two alternative models. Important processes of groundwater flow and transport are evaluated using our new method. The method is mathematically general, and can be applied to a wide range of environmental problems.

A new process sensitivity index to identify important system processes under process model and parametric uncertainty

DOE PAGES

Dai, Heng; Ye, Ming; Walker, Anthony P.; ...

2017-03-28

A hydrological model consists of multiple process level submodels, and each submodel represents a process key to the operation of the simulated system. Global sensitivity analysis methods have been widely used to identify important processes for system model development and improvement. The existing methods of global sensitivity analysis only consider parametric uncertainty, and are not capable of handling model uncertainty caused by multiple process models that arise from competing hypotheses about one or more processes. To address this problem, this study develops a new method to probe model output sensitivity to competing process models by integrating model averaging methods withmore » variance-based global sensitivity analysis. A process sensitivity index is derived as a single summary measure of relative process importance, and the index includes variance in model outputs caused by uncertainty in both process models and their parameters. Here, for demonstration, the new index is used to assign importance to the processes of recharge and geology in a synthetic study of groundwater reactive transport modeling. The recharge process is simulated by two models that convert precipitation to recharge, and the geology process is simulated by two models of hydraulic conductivity. Each process model has its own random parameters. Finally, the new process sensitivity index is mathematically general, and can be applied to a wide range of problems in hydrology and beyond.« less

A new process sensitivity index to identify important system processes under process model and parametric uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Heng; Ye, Ming; Walker, Anthony P.

A hydrological model consists of multiple process level submodels, and each submodel represents a process key to the operation of the simulated system. Global sensitivity analysis methods have been widely used to identify important processes for system model development and improvement. The existing methods of global sensitivity analysis only consider parametric uncertainty, and are not capable of handling model uncertainty caused by multiple process models that arise from competing hypotheses about one or more processes. To address this problem, this study develops a new method to probe model output sensitivity to competing process models by integrating model averaging methods withmore » variance-based global sensitivity analysis. A process sensitivity index is derived as a single summary measure of relative process importance, and the index includes variance in model outputs caused by uncertainty in both process models and their parameters. Here, for demonstration, the new index is used to assign importance to the processes of recharge and geology in a synthetic study of groundwater reactive transport modeling. The recharge process is simulated by two models that convert precipitation to recharge, and the geology process is simulated by two models of hydraulic conductivity. Each process model has its own random parameters. Finally, the new process sensitivity index is mathematically general, and can be applied to a wide range of problems in hydrology and beyond.« less

Social Network Supported Process Recommender System

PubMed Central

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced. PMID:24672309

A model for process representation and synthesis. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Thomas, R. H.

1971-01-01

The problem of representing groups of loosely connected processes is investigated, and a model for process representation useful for synthesizing complex patterns of process behavior is developed. There are three parts, the first part isolates the concepts which form the basis for the process representation model by focusing on questions such as: What is a process; What is an event; Should one process be able to restrict the capabilities of another? The second part develops a model for process representation which captures the concepts and intuitions developed in the first part. The model presented is able to describe both the internal structure of individual processes and the interface structure between interacting processes. Much of the model's descriptive power derives from its use of the notion of process state as a vehicle for relating the internal and external aspects of process behavior. The third part demonstrates by example that the model for process representation is a useful one for synthesizing process behavior patterns. In it the model is used to define a variety of interesting process behavior patterns. The dissertation closes by suggesting how the model could be used as a semantic base for a very potent language extension facility.

Process and Post-Process: A Discursive History.

ERIC Educational Resources Information Center

Matsuda, Paul Kei

2003-01-01

Examines the history of process and post-process in composition studies, focusing on ways in which terms, such as "current-traditional rhetoric,""process," and "post-process" have contributed to the discursive construction of reality. Argues that use of the term post-process in the context of second language writing needs to be guided by a…

Improving operational anodising process performance using simulation approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liong, Choong-Yeun, E-mail: lg@ukm.edu.my; Ghazali, Syarah Syahidah, E-mail: syarah@gapps.kptm.edu.my

The use of aluminium is very widespread, especially in transportation, electrical and electronics, architectural, automotive and engineering applications sectors. Therefore, the anodizing process is an important process for aluminium in order to make the aluminium durable, attractive and weather resistant. This research is focused on the anodizing process operations in manufacturing and supplying of aluminium extrusion. The data required for the development of the model is collected from the observations and interviews conducted in the study. To study the current system, the processes involved in the anodizing process are modeled by using Arena 14.5 simulation software. Those processes consist ofmore » five main processes, namely the degreasing process, the etching process, the desmut process, the anodizing process, the sealing process and 16 other processes. The results obtained were analyzed to identify the problems or bottlenecks that occurred and to propose improvement methods that can be implemented on the original model. Based on the comparisons that have been done between the improvement methods, the productivity could be increased by reallocating the workers and reducing loading time.« less

Feller processes: the next generation in modeling. Brownian motion, Lévy processes and beyond.

PubMed

Böttcher, Björn

2010-12-03

We present a simple construction method for Feller processes and a framework for the generation of sample paths of Feller processes. The construction is based on state space dependent mixing of Lévy processes. Brownian Motion is one of the most frequently used continuous time Markov processes in applications. In recent years also Lévy processes, of which Brownian Motion is a special case, have become increasingly popular. Lévy processes are spatially homogeneous, but empirical data often suggest the use of spatially inhomogeneous processes. Thus it seems necessary to go to the next level of generalization: Feller processes. These include Lévy processes and in particular brownian motion as special cases but allow spatial inhomogeneities. Many properties of Feller processes are known, but proving the very existence is, in general, very technical. Moreover, an applicable framework for the generation of sample paths of a Feller process was missing. We explain, with practitioners in mind, how to overcome both of these obstacles. In particular our simulation technique allows to apply Monte Carlo methods to Feller processes.

Feller Processes: The Next Generation in Modeling. Brownian Motion, Lévy Processes and Beyond

PubMed Central

Böttcher, Björn

2010-01-01

We present a simple construction method for Feller processes and a framework for the generation of sample paths of Feller processes. The construction is based on state space dependent mixing of Lévy processes. Brownian Motion is one of the most frequently used continuous time Markov processes in applications. In recent years also Lévy processes, of which Brownian Motion is a special case, have become increasingly popular. Lévy processes are spatially homogeneous, but empirical data often suggest the use of spatially inhomogeneous processes. Thus it seems necessary to go to the next level of generalization: Feller processes. These include Lévy processes and in particular Brownian motion as special cases but allow spatial inhomogeneities. Many properties of Feller processes are known, but proving the very existence is, in general, very technical. Moreover, an applicable framework for the generation of sample paths of a Feller process was missing. We explain, with practitioners in mind, how to overcome both of these obstacles. In particular our simulation technique allows to apply Monte Carlo methods to Feller processes. PMID:21151931

AIRSAR Automated Web-based Data Processing and Distribution System

NASA Technical Reports Server (NTRS)

Chu, Anhua; vanZyl, Jakob; Kim, Yunjin; Lou, Yunling; Imel, David; Tung, Wayne; Chapman, Bruce; Durden, Stephen

2005-01-01

In this paper, we present an integrated, end-to-end synthetic aperture radar (SAR) processing system that accepts data processing requests, submits processing jobs, performs quality analysis, delivers and archives processed data. This fully automated SAR processing system utilizes database and internet/intranet web technologies to allow external users to browse and submit data processing requests and receive processed data. It is a cost-effective way to manage a robust SAR processing and archival system. The integration of these functions has reduced operator errors and increased processor throughput dramatically.

Simplified process model discovery based on role-oriented genetic mining.

PubMed

Zhao, Weidong; Liu, Xi; Dai, Weihui

2014-01-01

Process mining is automated acquisition of process models from event logs. Although many process mining techniques have been developed, most of them are based on control flow. Meanwhile, the existing role-oriented process mining methods focus on correctness and integrity of roles while ignoring role complexity of the process model, which directly impacts understandability and quality of the model. To address these problems, we propose a genetic programming approach to mine the simplified process model. Using a new metric of process complexity in terms of roles as the fitness function, we can find simpler process models. The new role complexity metric of process models is designed from role cohesion and coupling, and applied to discover roles in process models. Moreover, the higher fitness derived from role complexity metric also provides a guideline for redesigning process models. Finally, we conduct case study and experiments to show that the proposed method is more effective for streamlining the process by comparing with related studies.

Electrotechnologies to process foods

USDA-ARS?s Scientific Manuscript database

Electrical energy is being used to process foods. In conventional food processing plants, electricity drives mechanical devices and controls the degree of process. In recent years, several processing technologies are being developed to process foods directly with electricity. Electrotechnologies use...

Challenges associated with the implementation of the nursing process: A systematic review.

PubMed

Zamanzadeh, Vahid; Valizadeh, Leila; Tabrizi, Faranak Jabbarzadeh; Behshid, Mojghan; Lotfi, Mojghan

2015-01-01

Nursing process is a scientific approach in the provision of qualified nursing cares. However, in practice, the implementation of this process is faced with numerous challenges. With the knowledge of the challenges associated with the implementation of the nursing process, the nursing processes can be developed appropriately. Due to the lack of comprehensive information on this subject, the current study was carried out to assess the key challenges associated with the implementation of the nursing process. To achieve and review related studies on this field, databases of Iran medix, SID, Magiran, PUBMED, Google scholar, and Proquest were assessed using the main keywords of nursing process and nursing process systematic review. The articles were retrieved in three steps including searching by keywords, review of the proceedings based on inclusion criteria, and final retrieval and assessment of available full texts. Systematic assessment of the articles showed different challenges in implementation of the nursing process. Intangible understanding of the concept of nursing process, different views of the process, lack of knowledge and awareness among nurses related to the execution of process, supports of managing systems, and problems related to recording the nursing process were the main challenges that were extracted from review of literature. On systematically reviewing the literature, intangible understanding of the concept of nursing process has been identified as the main challenge in nursing process. To achieve the best strategy to minimize the challenge, in addition to preparing facilitators for implementation of nursing process, intangible understanding of the concept of nursing process, different views of the process, and forming teams of experts in nursing education are recommended for internalizing the nursing process among nurses.

Challenges associated with the implementation of the nursing process: A systematic review

PubMed Central

Zamanzadeh, Vahid; Valizadeh, Leila; Tabrizi, Faranak Jabbarzadeh; Behshid, Mojghan; Lotfi, Mojghan

2015-01-01

Background: Nursing process is a scientific approach in the provision of qualified nursing cares. However, in practice, the implementation of this process is faced with numerous challenges. With the knowledge of the challenges associated with the implementation of the nursing process, the nursing processes can be developed appropriately. Due to the lack of comprehensive information on this subject, the current study was carried out to assess the key challenges associated with the implementation of the nursing process. Materials and Methods: To achieve and review related studies on this field, databases of Iran medix, SID, Magiran, PUBMED, Google scholar, and Proquest were assessed using the main keywords of nursing process and nursing process systematic review. The articles were retrieved in three steps including searching by keywords, review of the proceedings based on inclusion criteria, and final retrieval and assessment of available full texts. Results: Systematic assessment of the articles showed different challenges in implementation of the nursing process. Intangible understanding of the concept of nursing process, different views of the process, lack of knowledge and awareness among nurses related to the execution of process, supports of managing systems, and problems related to recording the nursing process were the main challenges that were extracted from review of literature. Conclusions: On systematically reviewing the literature, intangible understanding of the concept of nursing process has been identified as the main challenge in nursing process. To achieve the best strategy to minimize the challenge, in addition to preparing facilitators for implementation of nursing process, intangible understanding of the concept of nursing process, different views of the process, and forming teams of experts in nursing education are recommended for internalizing the nursing process among nurses. PMID:26257793

Automated synthesis of image processing procedures using AI planning techniques

NASA Technical Reports Server (NTRS)

Chien, Steve; Mortensen, Helen

1994-01-01

This paper describes the Multimission VICAR (Video Image Communication and Retrieval) Planner (MVP) (Chien 1994) system, which uses artificial intelligence planning techniques (Iwasaki & Friedland, 1985, Pemberthy & Weld, 1992, Stefik, 1981) to automatically construct executable complex image processing procedures (using models of the smaller constituent image processing subprograms) in response to image processing requests made to the JPL Multimission Image Processing Laboratory (MIPL). The MVP system allows the user to specify the image processing requirements in terms of the various types of correction required. Given this information, MVP derives unspecified required processing steps and determines appropriate image processing programs and parameters to achieve the specified image processing goals. This information is output as an executable image processing program which can then be executed to fill the processing request.

Optimisation of shock absorber process parameters using failure mode and effect analysis and genetic algorithm

NASA Astrophysics Data System (ADS)

Mariajayaprakash, Arokiasamy; Senthilvelan, Thiyagarajan; Vivekananthan, Krishnapillai Ponnambal

2013-07-01

The various process parameters affecting the quality characteristics of the shock absorber during the process were identified using the Ishikawa diagram and by failure mode and effect analysis. The identified process parameters are welding process parameters (squeeze, heat control, wheel speed, and air pressure), damper sealing process parameters (load, hydraulic pressure, air pressure, and fixture height), washing process parameters (total alkalinity, temperature, pH value of rinsing water, and timing), and painting process parameters (flowability, coating thickness, pointage, and temperature). In this paper, the process parameters, namely, painting and washing process parameters, are optimized by Taguchi method. Though the defects are reasonably minimized by Taguchi method, in order to achieve zero defects during the processes, genetic algorithm technique is applied on the optimized parameters obtained by Taguchi method.

Methods, media and systems for managing a distributed application running in a plurality of digital processing devices

DOEpatents

Laadan, Oren; Nieh, Jason; Phung, Dan

2012-10-02

Methods, media and systems for managing a distributed application running in a plurality of digital processing devices are provided. In some embodiments, a method includes running one or more processes associated with the distributed application in virtualized operating system environments on a plurality of digital processing devices, suspending the one or more processes, and saving network state information relating to network connections among the one or more processes. The method further include storing process information relating to the one or more processes, recreating the network connections using the saved network state information, and restarting the one or more processes using the stored process information.

SEMICONDUCTOR TECHNOLOGY A signal processing method for the friction-based endpoint detection system of a CMP process

NASA Astrophysics Data System (ADS)

Chi, Xu; Dongming, Guo; Zhuji, Jin; Renke, Kang

2010-12-01

A signal processing method for the friction-based endpoint detection system of a chemical mechanical polishing (CMP) process is presented. The signal process method uses the wavelet threshold denoising method to reduce the noise contained in the measured original signal, extracts the Kalman filter innovation from the denoised signal as the feature signal, and judges the CMP endpoint based on the feature of the Kalman filter innovation sequence during the CMP process. Applying the signal processing method, the endpoint detection experiments of the Cu CMP process were carried out. The results show that the signal processing method can judge the endpoint of the Cu CMP process.

Composite faces are not (necessarily) processed coactively: A test using systems factorial technology and logical-rule models.

PubMed

Cheng, Xue Jun; McCarthy, Callum J; Wang, Tony S L; Palmeri, Thomas J; Little, Daniel R

2018-06-01

Upright faces are thought to be processed more holistically than inverted faces. In the widely used composite face paradigm, holistic processing is inferred from interference in recognition performance from a to-be-ignored face half for upright and aligned faces compared with inverted or misaligned faces. We sought to characterize the nature of holistic processing in composite faces in computational terms. We use logical-rule models (Fifić, Little, & Nosofsky, 2010) and Systems Factorial Technology (Townsend & Nozawa, 1995) to examine whether composite faces are processed through pooling top and bottom face halves into a single processing channel-coactive processing-which is one common mechanistic definition of holistic processing. By specifically operationalizing holistic processing as the pooling of features into a single decision process in our task, we are able to distinguish it from other processing models that may underlie composite face processing. For instance, a failure of selective attention might result even when top and bottom components of composite faces are processed in serial or in parallel without processing the entire face coactively. Our results show that performance is best explained by a mixture of serial and parallel processing architectures across all 4 upright and inverted, aligned and misaligned face conditions. The results indicate multichannel, featural processing of composite faces in a manner inconsistent with the notion of coactivity. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Fuzzy image processing in sun sensor

NASA Technical Reports Server (NTRS)

Mobasser, S.; Liebe, C. C.; Howard, A.

2003-01-01

This paper will describe how the fuzzy image processing is implemented in the instrument. Comparison of the Fuzzy image processing and a more conventional image processing algorithm is provided and shows that the Fuzzy image processing yields better accuracy then conventional image processing.

DESIGNING ENVIRONMENTAL, ECONOMIC AND ENERGY EFFICIENT CHEMICAL PROCESSES

EPA Science Inventory

The design and improvement of chemical processes can be very challenging. The earlier energy conservation, process economics and environmental aspects are incorporated into the process development, the easier and less expensive it is to alter the process design. Process emissio...

Reversing the conventional leather processing sequence for cleaner leather production.

PubMed

Saravanabhavan, Subramani; Thanikaivelan, Palanisamy; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni; Ramasami, Thirumalachari

2006-02-01

Conventional leather processing generally involves a combination of single and multistep processes that employs as well as expels various biological, inorganic, and organic materials. It involves nearly 14-15 steps and discharges a huge amount of pollutants. This is primarily due to the fact that conventional leather processing employs a "do-undo" process logic. In this study, the conventional leather processing steps have been reversed to overcome the problems associated with the conventional method. The charges of the skin matrix and of the chemicals and pH profiles of the process have been judiciously used for reversing the process steps. This reversed process eventually avoids several acidification and basification/neutralization steps used in conventional leather processing. The developed process has been validated through various analyses such as chromium content, shrinkage temperature, softness measurements, scanning electron microscopy, and physical testing of the leathers. Further, the performance of the leathers is shown to be on par with conventionally processed leathers through bulk property evaluation. The process enjoys a significant reduction in COD and TS by 53 and 79%, respectively. Water consumption and discharge is reduced by 65 and 64%, respectively. Also, the process benefits from significant reduction in chemicals, time, power, and cost compared to the conventional process.

Group processing in an undergraduate biology course for preservice teachers: Experiences and attitudes

NASA Astrophysics Data System (ADS)

Schellenberger, Lauren Brownback

Group processing is a key principle of cooperative learning in which small groups discuss their strengths and weaknesses and set group goals or norms. However, group processing has not been well-studied at the post-secondary level or from a qualitative or mixed methods perspective. This mixed methods study uses a phenomenological framework to examine the experience of group processing for students in an undergraduate biology course for preservice teachers. The effect of group processing on students' attitudes toward future group work and group processing is also examined. Additionally, this research investigated preservice teachers' plans for incorporating group processing into future lessons. Students primarily experienced group processing as a time to reflect on past performance. Also, students experienced group processing as a time to increase communication among group members and become motivated for future group assignments. Three factors directly influenced students' experiences with group processing: (1) previous experience with group work, (2) instructor interaction, and (3) gender. Survey data indicated that group processing had a slight positive effect on students' attitudes toward future group work and group processing. Participants who were interviewed felt that group processing was an important part of group work and that it had increased their group's effectiveness as well as their ability to work effectively with other people. Participants held positive views on group work prior to engaging in group processing, and group processing did not alter their atittude toward group work. Preservice teachers who were interviewed planned to use group work and a modified group processing protocol in their future classrooms. They also felt that group processing had prepared them for their future professions by modeling effective collaboration and group skills. Based on this research, a new model for group processing has been created which includes extensive instructor interaction and additional group processing sessions. This study offers a new perspective on the phenomenon of group processing and informs science educators and teacher educators on the effective implementation of this important component of small-group learning.

Properties of the Bivariate Delayed Poisson Process

DTIC Science & Technology

1974-07-01

and Lewis (1972) in their Berkeley Symposium paper and here their analysis of the bivariate Poisson processes (without Poisson noise) is carried... Poisson processes . They cannot, however, be independent Poisson processes because their events are associated in pairs by the displace- ment centres...process because its marginal processes for events of each type are themselves (univariate) Poisson processes . Cox and Lewis (1972) assumed a

The Application of Six Sigma Methodologies to University Processes: The Use of Student Teams

ERIC Educational Resources Information Center

Pryor, Mildred Golden; Alexander, Christine; Taneja, Sonia; Tirumalasetty, Sowmya; Chadalavada, Deepthi

2012-01-01

The first student Six Sigma team (activated under a QEP Process Sub-team) evaluated the course and curriculum approval process. The goal was to streamline the process and thereby shorten process cycle time and reduce confusion about how the process works. Members of this team developed flowcharts on how the process is supposed to work (by…

Impact of Radio Frequency Identification (RFID) on the Marine Corps’ Supply Process

DTIC Science & Technology

2006-09-01

Hypothetical Improvement Using a Real-Time Order Processing System Vice a Batch Order Processing System ................56 3. As-Is: The Current... Processing System Vice a Batch Order Processing System ................58 V. RESULTS ................................................69 A. SIMULATION...Time: Hypothetical Improvement Using a Real-Time Order Processing System Vice a Batch Order Processing System ................71 3. As-Is: The

Global-local processing relates to spatial and verbal processing: implications for sex differences in cognition.

PubMed

Pletzer, Belinda; Scheuringer, Andrea; Scherndl, Thomas

2017-09-05

Sex differences have been reported for a variety of cognitive tasks and related to the use of different cognitive processing styles in men and women. It was recently argued that these processing styles share some characteristics across tasks, i.e. male approaches are oriented towards holistic stimulus aspects and female approaches are oriented towards stimulus details. In that respect, sex-dependent cognitive processing styles share similarities with attentional global-local processing. A direct relationship between cognitive processing and global-local processing has however not been previously established. In the present study, 49 men and 44 women completed a Navon paradigm and a Kimchi Palmer task as well as a navigation task and a verbal fluency task with the goal to relate the global advantage (GA) effect as a measure of global processing to holistic processing styles in both tasks. Indeed participants with larger GA effects displayed more holistic processing during spatial navigation and phonemic fluency. However, the relationship to cognitive processing styles was modulated by the specific condition of the Navon paradigm, as well as the sex of participants. Thus, different types of global-local processing play different roles for cognitive processing in men and women.

21 CFR 113.83 - Establishing scheduled processes.

Code of Federal Regulations, 2012 CFR

2012-04-01

... competent processing authorities. If incubation tests are necessary for process confirmation, they shall... instituting the process. The incubation tests for confirmation of the scheduled processes should include the.... Complete records covering all aspects of the establishment of the process and associated incubation tests...

21 CFR 113.83 - Establishing scheduled processes.

Code of Federal Regulations, 2014 CFR

2014-04-01

... competent processing authorities. If incubation tests are necessary for process confirmation, they shall... instituting the process. The incubation tests for confirmation of the scheduled processes should include the.... Complete records covering all aspects of the establishment of the process and associated incubation tests...

21 CFR 113.83 - Establishing scheduled processes.

Code of Federal Regulations, 2013 CFR

2013-04-01

... competent processing authorities. If incubation tests are necessary for process confirmation, they shall... instituting the process. The incubation tests for confirmation of the scheduled processes should include the.... Complete records covering all aspects of the establishment of the process and associated incubation tests...

A mathematical study of a random process proposed as an atmospheric turbulence model

NASA Technical Reports Server (NTRS)

Sidwell, K.

1977-01-01

A random process is formed by the product of a local Gaussian process and a random amplitude process, and the sum of that product with an independent mean value process. The mathematical properties of the resulting process are developed, including the first and second order properties and the characteristic function of general order. An approximate method for the analysis of the response of linear dynamic systems to the process is developed. The transition properties of the process are also examined.

Standard services for the capture, processing, and distribution of packetized telemetry data

NASA Technical Reports Server (NTRS)

Stallings, William H.

1989-01-01

Standard functional services for the capture, processing, and distribution of packetized data are discussed with particular reference to the future implementation of packet processing systems, such as those for the Space Station Freedom. The major functions are listed under the following major categories: input processing, packet processing, and output processing. A functional block diagram of a packet data processing facility is presented, showing the distribution of the various processing functions as well as the primary data flow through the facility.

Assessment of hospital processes using a process mining technique: Outpatient process analysis at a tertiary hospital.

PubMed

Yoo, Sooyoung; Cho, Minsu; Kim, Eunhye; Kim, Seok; Sim, Yerim; Yoo, Donghyun; Hwang, Hee; Song, Minseok

2016-04-01

Many hospitals are increasing their efforts to improve processes because processes play an important role in enhancing work efficiency and reducing costs. However, to date, a quantitative tool has not been available to examine the before and after effects of processes and environmental changes, other than the use of indirect indicators, such as mortality rate and readmission rate. This study used process mining technology to analyze process changes based on changes in the hospital environment, such as the construction of a new building, and to measure the effects of environmental changes in terms of consultation wait time, time spent per task, and outpatient care processes. Using process mining technology, electronic health record (EHR) log data of outpatient care before and after constructing a new building were analyzed, and the effectiveness of the technology in terms of the process was evaluated. Using the process mining technique, we found that the total time spent in outpatient care did not increase significantly compared to that before the construction of a new building, considering that the number of outpatients increased, and the consultation wait time decreased. These results suggest that the operation of the outpatient clinic was effective after changes were implemented in the hospital environment. We further identified improvements in processes using the process mining technique, thereby demonstrating the usefulness of this technique for analyzing complex hospital processes at a low cost. This study confirmed the effectiveness of process mining technology at an actual hospital site. In future studies, the use of process mining technology will be expanded by applying this approach to a larger variety of process change situations. Copyright © 2016. Published by Elsevier Ireland Ltd.

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

NASA Technical Reports Server (NTRS)

Miller, L.

1974-01-01

A two year study of the major process variables associated with the manufacturing process for sealed, nickel-cadmium, areospace cells is summarized. Effort was directed toward identifying the major process variables associated with a manufacturing process, experimentally assessing each variable's effect, and imposing the necessary changes (optimization) and controls for the critical process variables to improve results and uniformity. A critical process variable associated with the sintered nickel plaque manufacturing process was identified as the manual forming operation. Critical process variables identified with the positive electrode impregnation/polarization process were impregnation solution temperature, free acid content, vacuum impregnation, and sintered plaque strength. Positive and negative electrodes were identified as a major source of carbonate contamination in sealed cells.

Monitoring autocorrelated process: A geometric Brownian motion process approach

NASA Astrophysics Data System (ADS)

Li, Lee Siaw; Djauhari, Maman A.

2013-09-01

Autocorrelated process control is common in today's modern industrial process control practice. The current practice of autocorrelated process control is to eliminate the autocorrelation by using an appropriate model such as Box-Jenkins models or other models and then to conduct process control operation based on the residuals. In this paper we show that many time series are governed by a geometric Brownian motion (GBM) process. Therefore, in this case, by using the properties of a GBM process, we only need an appropriate transformation and model the transformed data to come up with the condition needs in traditional process control. An industrial example of cocoa powder production process in a Malaysian company will be presented and discussed to illustrate the advantages of the GBM approach.

Meta-control of combustion performance with a data mining approach

NASA Astrophysics Data System (ADS)

Song, Zhe

Large scale combustion process is complex and proposes challenges of optimizing its performance. Traditional approaches based on thermal dynamics have limitations on finding optimal operational regions due to time-shift nature of the process. Recent advances in information technology enable people collect large volumes of process data easily and continuously. The collected process data contains rich information about the process and, to some extent, represents a digital copy of the process over time. Although large volumes of data exist in industrial combustion processes, they are not fully utilized to the level where the process can be optimized. Data mining is an emerging science which finds patterns or models from large data sets. It has found many successful applications in business marketing, medical and manufacturing domains The focus of this dissertation is on applying data mining to industrial combustion processes, and ultimately optimizing the combustion performance. However the philosophy, methods and frameworks discussed in this research can also be applied to other industrial processes. Optimizing an industrial combustion process has two major challenges. One is the underlying process model changes over time and obtaining an accurate process model is nontrivial. The other is that a process model with high fidelity is usually highly nonlinear, solving the optimization problem needs efficient heuristics. This dissertation is set to solve these two major challenges. The major contribution of this 4-year research is the data-driven solution to optimize the combustion process, where process model or knowledge is identified based on the process data, then optimization is executed by evolutionary algorithms to search for optimal operating regions.

5 CFR 1653.13 - Processing legal processes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 3 2014-01-01 2014-01-01 false Processing legal processes. 1653.13 Section 1653.13 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD COURT ORDERS AND LEGAL PROCESSES AFFECTING THRIFT SAVINGS PLAN ACCOUNTS Legal Process for the Enforcement of a Participant's Legal...

5 CFR 1653.13 - Processing legal processes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Processing legal processes. 1653.13 Section 1653.13 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD COURT ORDERS AND LEGAL PROCESSES AFFECTING THRIFT SAVINGS PLAN ACCOUNTS Legal Process for the Enforcement of a Participant's Legal...

A Search Algorithm for Generating Alternative Process Plans in Flexible Manufacturing System

NASA Astrophysics Data System (ADS)

Tehrani, Hossein; Sugimura, Nobuhiro; Tanimizu, Yoshitaka; Iwamura, Koji

Capabilities and complexity of manufacturing systems are increasing and striving for an integrated manufacturing environment. Availability of alternative process plans is a key factor for integration of design, process planning and scheduling. This paper describes an algorithm for generation of alternative process plans by extending the existing framework of the process plan networks. A class diagram is introduced for generating process plans and process plan networks from the viewpoint of the integrated process planning and scheduling systems. An incomplete search algorithm is developed for generating and searching the process plan networks. The benefit of this algorithm is that the whole process plan network does not have to be generated before the search algorithm starts. This algorithm is applicable to large and enormous process plan networks and also to search wide areas of the network based on the user requirement. The algorithm can generate alternative process plans and to select a suitable one based on the objective functions.

PyMS: a Python toolkit for processing of gas chromatography-mass spectrometry (GC-MS) data. Application and comparative study of selected tools.

PubMed

O'Callaghan, Sean; De Souza, David P; Isaac, Andrew; Wang, Qiao; Hodkinson, Luke; Olshansky, Moshe; Erwin, Tim; Appelbe, Bill; Tull, Dedreia L; Roessner, Ute; Bacic, Antony; McConville, Malcolm J; Likić, Vladimir A

2012-05-30

Gas chromatography-mass spectrometry (GC-MS) is a technique frequently used in targeted and non-targeted measurements of metabolites. Most existing software tools for processing of raw instrument GC-MS data tightly integrate data processing methods with graphical user interface facilitating interactive data processing. While interactive processing remains critically important in GC-MS applications, high-throughput studies increasingly dictate the need for command line tools, suitable for scripting of high-throughput, customized processing pipelines. PyMS comprises a library of functions for processing of instrument GC-MS data developed in Python. PyMS currently provides a complete set of GC-MS processing functions, including reading of standard data formats (ANDI- MS/NetCDF and JCAMP-DX), noise smoothing, baseline correction, peak detection, peak deconvolution, peak integration, and peak alignment by dynamic programming. A novel common ion single quantitation algorithm allows automated, accurate quantitation of GC-MS electron impact (EI) fragmentation spectra when a large number of experiments are being analyzed. PyMS implements parallel processing for by-row and by-column data processing tasks based on Message Passing Interface (MPI), allowing processing to scale on multiple CPUs in distributed computing environments. A set of specifically designed experiments was performed in-house and used to comparatively evaluate the performance of PyMS and three widely used software packages for GC-MS data processing (AMDIS, AnalyzerPro, and XCMS). PyMS is a novel software package for the processing of raw GC-MS data, particularly suitable for scripting of customized processing pipelines and for data processing in batch mode. PyMS provides limited graphical capabilities and can be used both for routine data processing and interactive/exploratory data analysis. In real-life GC-MS data processing scenarios PyMS performs as well or better than leading software packages. We demonstrate data processing scenarios simple to implement in PyMS, yet difficult to achieve with many conventional GC-MS data processing software. Automated sample processing and quantitation with PyMS can provide substantial time savings compared to more traditional interactive software systems that tightly integrate data processing with the graphical user interface.

Processing mode during repetitive thinking in socially anxious individuals: evidence for a maladaptive experiential mode.

PubMed

Wong, Quincy J J; Moulds, Michelle L

2012-12-01

Evidence from the depression literature suggests that an analytical processing mode adopted during repetitive thinking leads to maladaptive outcomes relative to an experiential processing mode. To date, in socially anxious individuals, the impact of processing mode during repetitive thinking related to an actual social-evaluative situation has not been investigated. We thus tested whether an analytical processing mode would be maladaptive relative to an experiential processing mode during anticipatory processing and post-event rumination. High and low socially anxious participants were induced to engage in either an analytical or experiential processing mode during: (a) anticipatory processing before performing a speech (Experiment 1; N = 94), or (b) post-event rumination after performing a speech (Experiment 2; N = 74). Mood, cognition, and behavioural measures were employed to examine the effects of processing mode. For high socially anxious participants, the modes had a similar effect on self-reported anxiety during both anticipatory processing and post-event rumination. Unexpectedly, relative to the analytical mode, the experiential mode led to stronger high standard and conditional beliefs during anticipatory processing, and stronger unconditional beliefs during post-event rumination. These experiments are the first to investigate processing mode during anticipatory processing and post-event rumination. Hence, these results are novel and will need to be replicated. These findings suggest that an experiential processing mode is maladaptive relative to an analytical processing mode during repetitive thinking characteristic of socially anxious individuals. Copyright © 2012 Elsevier Ltd. All rights reserved.

Using process elicitation and validation to understand and improve chemotherapy ordering and delivery.

PubMed

Mertens, Wilson C; Christov, Stefan C; Avrunin, George S; Clarke, Lori A; Osterweil, Leon J; Cassells, Lucinda J; Marquard, Jenna L

2012-11-01

Chemotherapy ordering and administration, in which errors have potentially severe consequences, was quantitatively and qualitatively evaluated by employing process formalism (or formal process definition), a technique derived from software engineering, to elicit and rigorously describe the process, after which validation techniques were applied to confirm the accuracy of the described process. The chemotherapy ordering and administration process, including exceptional situations and individuals' recognition of and responses to those situations, was elicited through informal, unstructured interviews with members of an interdisciplinary team. The process description (or process definition), written in a notation developed for software quality assessment purposes, guided process validation (which consisted of direct observations and semistructured interviews to confirm the elicited details for the treatment plan portion of the process). The overall process definition yielded 467 steps; 207 steps (44%) were dedicated to handling 59 exceptional situations. Validation yielded 82 unique process events (35 new expected but not yet described steps, 16 new exceptional situations, and 31 new steps in response to exceptional situations). Process participants actively altered the process as ambiguities and conflicts were discovered by the elicitation and validation components of the study. Chemotherapy error rates declined significantly during and after the project, which was conducted from October 2007 through August 2008. Each elicitation method and the subsequent validation discussions contributed uniquely to understanding the chemotherapy treatment plan review process, supporting rapid adoption of changes, improved communication regarding the process, and ensuing error reduction.

Modeling interdependencies between business and communication processes in hospitals.

PubMed

Brigl, Birgit; Wendt, Thomas; Winter, Alfred

2003-01-01

The optimization and redesign of business processes in hospitals is an important challenge for the hospital information management who has to design and implement a suitable HIS architecture. Nevertheless, there are no tools available specializing in modeling information-driven business processes and the consequences on the communication between information processing, tools. Therefore, we will present an approach which facilitates the representation and analysis of business processes and resulting communication processes between application components and their interdependencies. This approach aims not only to visualize those processes, but to also to evaluate if there are weaknesses concerning the information processing infrastructure which hinder the smooth implementation of the business processes.

Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production.

PubMed

Ott, Denise; Kralisch, Dana; Denčić, Ivana; Hessel, Volker; Laribi, Yosra; Perrichon, Philippe D; Berguerand, Charline; Kiwi-Minsker, Lioubov; Loeb, Patrick

2014-12-01

As the demand for new drugs is rising, the pharmaceutical industry faces the quest of shortening development time, and thus, reducing the time to market. Environmental aspects typically still play a minor role within the early phase of process development. Nevertheless, it is highly promising to rethink, redesign, and optimize process strategies as early as possible in active pharmaceutical ingredient (API) process development, rather than later at the stage of already established processes. The study presented herein deals with a holistic life-cycle-based process optimization and intensification of a pharmaceutical production process targeting a low-volume, high-value API. Striving for process intensification by transfer from batch to continuous processing, as well as an alternative catalytic system, different process options are evaluated with regard to their environmental impact to identify bottlenecks and improvement potentials for further process development activities. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Face to face with emotion: holistic face processing is modulated by emotional state.

PubMed

Curby, Kim M; Johnson, Kareem J; Tyson, Alyssa

2012-01-01

Negative emotions are linked with a local, rather than global, visual processing style, which may preferentially facilitate feature-based, relative to holistic, processing mechanisms. Because faces are typically processed holistically, and because social contexts are prime elicitors of emotions, we examined whether negative emotions decrease holistic processing of faces. We induced positive, negative, or neutral emotions via film clips and measured holistic processing before and after the induction: participants made judgements about cued parts of chimeric faces, and holistic processing was indexed by the interference caused by task-irrelevant face parts. Emotional state significantly modulated face-processing style, with the negative emotion induction leading to decreased holistic processing. Furthermore, self-reported change in emotional state correlated with changes in holistic processing. These results contrast with general assumptions that holistic processing of faces is automatic and immune to outside influences, and they illustrate emotion's power to modulate socially relevant aspects of visual perception.

5 CFR 581.203 - Information minimally required to accompany legal process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... accompany legal process. 581.203 Section 581.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... Process § 581.203 Information minimally required to accompany legal process. (a) Sufficient identifying information must accompany the legal process in order to enable processing by the governmental entity named...

5 CFR 581.203 - Information minimally required to accompany legal process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... accompany legal process. 581.203 Section 581.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... Process § 581.203 Information minimally required to accompany legal process. (a) Sufficient identifying information must accompany the legal process in order to enable processing by the governmental entity named...

5 CFR 581.203 - Information minimally required to accompany legal process.

Code of Federal Regulations, 2013 CFR

2013-01-01

... accompany legal process. 581.203 Section 581.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... Process § 581.203 Information minimally required to accompany legal process. (a) Sufficient identifying information must accompany the legal process in order to enable processing by the governmental entity named...

5 CFR 581.203 - Information minimally required to accompany legal process.

Code of Federal Regulations, 2012 CFR

2012-01-01

... accompany legal process. 581.203 Section 581.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... Process § 581.203 Information minimally required to accompany legal process. (a) Sufficient identifying information must accompany the legal process in order to enable processing by the governmental entity named...

5 CFR 581.203 - Information minimally required to accompany legal process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... accompany legal process. 581.203 Section 581.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT... Process § 581.203 Information minimally required to accompany legal process. (a) Sufficient identifying information must accompany the legal process in order to enable processing by the governmental entity named...

20 CFR 405.725 - Effect of expedited appeals process agreement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.725 Effect of expedited appeals process agreement. After an expedited appeals process agreement is... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Effect of expedited appeals process agreement...

Common and distinct networks for self-referential and social stimulus processing in the human brain.

PubMed

Herold, Dorrit; Spengler, Stephanie; Sajonz, Bastian; Usnich, Tatiana; Bermpohl, Felix

2016-09-01

Self-referential processing is a complex cognitive function, involving a set of implicit and explicit processes, complicating investigation of its distinct neural signature. The present study explores the functional overlap and dissociability of self-referential and social stimulus processing. We combined an established paradigm for explicit self-referential processing with an implicit social stimulus processing paradigm in one fMRI experiment to determine the neural effects of self-relatedness and social processing within one study. Overlapping activations were found in the orbitofrontal cortex and in the intermediate part of the precuneus. Stimuli judged as self-referential specifically activated the posterior cingulate cortex, the ventral medial prefrontal cortex, extending into anterior cingulate cortex and orbitofrontal cortex, the dorsal medial prefrontal cortex, the ventral and dorsal lateral prefrontal cortex, the left inferior temporal gyrus, and occipital cortex. Social processing specifically involved the posterior precuneus and bilateral temporo-parietal junction. Taken together, our data show, not only, first, common networks for both processes in the medial prefrontal and the medial parietal cortex, but also, second, functional differentiations for self-referential processing versus social processing: an anterior-posterior gradient for social processing and self-referential processing within the medial parietal cortex and specific activations for self-referential processing in the medial and lateral prefrontal cortex and for social processing in the temporo-parietal junction.

Using Unified Modelling Language (UML) as a process-modelling technique for clinical-research process improvement.

PubMed

Kumarapeli, P; De Lusignan, S; Ellis, T; Jones, B

2007-03-01

The Primary Care Data Quality programme (PCDQ) is a quality-improvement programme which processes routinely collected general practice computer data. Patient data collected from a wide range of different brands of clinical computer systems are aggregated, processed, and fed back to practices in an educational context to improve the quality of care. Process modelling is a well-established approach used to gain understanding and systematic appraisal, and identify areas of improvement of a business process. Unified modelling language (UML) is a general purpose modelling technique used for this purpose. We used UML to appraise the PCDQ process to see if the efficiency and predictability of the process could be improved. Activity analysis and thinking-aloud sessions were used to collect data to generate UML diagrams. The UML model highlighted the sequential nature of the current process as a barrier for efficiency gains. It also identified the uneven distribution of process controls, lack of symmetric communication channels, critical dependencies among processing stages, and failure to implement all the lessons learned in the piloting phase. It also suggested that improved structured reporting at each stage - especially from the pilot phase, parallel processing of data and correctly positioned process controls - should improve the efficiency and predictability of research projects. Process modelling provided a rational basis for the critical appraisal of a clinical data processing system; its potential maybe underutilized within health care.

Use of Analogies in the Study of Diffusion

ERIC Educational Resources Information Center

Letic, Milorad

2014-01-01

Emergent processes, such as diffusion, are considered more difficult to understand than direct processes. In physiology, most processes are presented as direct processes, so emergent processes, when encountered, are even more difficult to understand. It has been suggested that, when studying diffusion, misconceptions about random processes are the…

Is Analytic Information Processing a Feature of Expertise in Medicine?

ERIC Educational Resources Information Center

McLaughlin, Kevin; Rikers, Remy M.; Schmidt, Henk G.

2008-01-01

Diagnosing begins by generating an initial diagnostic hypothesis by automatic information processing. Information processing may stop here if the hypothesis is accepted, or analytical processing may be used to refine the hypothesis. This description portrays analytic processing as an optional extra in information processing, leading us to…

5 CFR 582.305 - Honoring legal process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Honoring legal process. 582.305 Section... GARNISHMENT OF FEDERAL EMPLOYEES' PAY Compliance With Legal Process § 582.305 Honoring legal process. (a) The agency shall comply with legal process, except where the process cannot be complied with because: (1) It...

5 CFR 582.305 - Honoring legal process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Honoring legal process. 582.305 Section... GARNISHMENT OF FEDERAL EMPLOYEES' PAY Compliance With Legal Process § 582.305 Honoring legal process. (a) The agency shall comply with legal process, except where the process cannot be complied with because: (1) It...

5 CFR 581.305 - Honoring legal process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Honoring legal process. 581.305 Section... GARNISHMENT ORDERS FOR CHILD SUPPORT AND/OR ALIMONY Compliance With Process § 581.305 Honoring legal process. (a) The governmental entity shall comply with legal process, except where the process cannot be...

5 CFR 581.305 - Honoring legal process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Honoring legal process. 581.305 Section... GARNISHMENT ORDERS FOR CHILD SUPPORT AND/OR ALIMONY Compliance With Process § 581.305 Honoring legal process. (a) The governmental entity shall comply with legal process, except where the process cannot be...

5 CFR 582.305 - Honoring legal process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Honoring legal process. 582.305 Section... GARNISHMENT OF FEDERAL EMPLOYEES' PAY Compliance With Legal Process § 582.305 Honoring legal process. (a) The agency shall comply with legal process, except where the process cannot be complied with because: (1) It...

5 CFR 581.305 - Honoring legal process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Honoring legal process. 581.305 Section... GARNISHMENT ORDERS FOR CHILD SUPPORT AND/OR ALIMONY Compliance With Process § 581.305 Honoring legal process. (a) The governmental entity shall comply with legal process, except where the process cannot be...

Articulating the Resources for Business Process Analysis and Design

ERIC Educational Resources Information Center

Jin, Yulong

2012-01-01

Effective process analysis and modeling are important phases of the business process management lifecycle. When many activities and multiple resources are involved, it is very difficult to build a correct business process specification. This dissertation provides a resource perspective of business processes. It aims at a better process analysis…

An Integrated Model of Emotion Processes and Cognition in Social Information Processing.

ERIC Educational Resources Information Center

Lemerise, Elizabeth A.; Arsenio, William F.

2000-01-01

Interprets literature on contributions of social cognitive and emotion processes to children's social competence in the context of an integrated model of emotion processes and cognition in social information processing. Provides neurophysiological and functional evidence for the centrality of emotion processes in personal-social decision making.…

Data Processing and First Products from the Hyperspectral Imager for the Coastal Ocean (HICO) on the International Space Station

DTIC Science & Technology

2010-04-01

NRL Stennis Space Center (NRL-SSC) for further processing using the NRL SSC Automated Processing System (APS). APS was developed for processing...have not previously developed automated processing for 73 hyperspectral ocean color data. The hyperspectral processing branch includes several

DISCRETE COMPOUND POISSON PROCESSES AND TABLES OF THE GEOMETRIC POISSON DISTRIBUTION.

DTIC Science & Technology

A concise summary of the salient properties of discrete Poisson processes , with emphasis on comparing the geometric and logarithmic Poisson processes . The...the geometric Poisson process are given for 176 sets of parameter values. New discrete compound Poisson processes are also introduced. These...processes have properties that are particularly relevant when the summation of several different Poisson processes is to be analyzed. This study provides the

Management of processes of electrochemical dimensional processing

NASA Astrophysics Data System (ADS)

Akhmetov, I. D.; Zakirova, A. R.; Sadykov, Z. B.

2017-09-01

In different industries a lot high-precision parts are produced from hard-processed scarce materials. Forming such details can only be acting during non-contact processing, or a minimum of effort, and doable by the use, for example, of electro-chemical processing. At the present stage of development of metal working processes are important management issues electrochemical machining and its automation. This article provides some indicators and factors of electrochemical machining process.

The Hyperspectral Imager for the Coastal Ocean (HICO): Sensor and Data Processing Overview

DTIC Science & Technology

2010-01-20

backscattering coefficients, and others. Several of these software modules will be developed within the Automated Processing System (APS), a data... Automated Processing System (APS) NRL developed APS, which processes satellite data into ocean color data products. APS is a collection of methods...used for ocean color processing which provide the tools for the automated processing of satellite imagery [1]. These tools are in the process of

[Study on culture and philosophy of processing of traditional Chinese medicines].

PubMed

Yang, Ming; Zhang, Ding-Kun; Zhong, Ling-Yun; Wang, Fang

2013-07-01

According to cultural views and philosophical thoughts, this paper studies the cultural origin, thinking modes, core principles, general regulation and methods of processing, backtracks processing's culture and history which contains generation and deduction process, experienced and promoting process, and core value, summarizes processing's basic principles which are directed by holistic, objective, dynamic, balanced and appropriate thoughts; so as to propagate cultural characteristic and philosophical wisdom of traditional Chinese medicine processing, to promote inheritance and development of processing and to ensure the maximum therapeutic value of Chinese medical clinical.

Containerless automated processing of intermetallic compounds and composites

NASA Technical Reports Server (NTRS)

Johnson, D. R.; Joslin, S. M.; Reviere, R. D.; Oliver, B. F.; Noebe, R. D.

1993-01-01

An automated containerless processing system has been developed to directionally solidify high temperature materials, intermetallic compounds, and intermetallic/metallic composites. The system incorporates a wide range of ultra-high purity chemical processing conditions. The utilization of image processing for automated control negates the need for temperature measurements for process control. The list of recent systems that have been processed includes Cr, Mo, Mn, Nb, Ni, Ti, V, and Zr containing aluminides. Possible uses of the system, process control approaches, and properties and structures of recently processed intermetallics are reviewed.

A continuous process for the development of Kodak Aerochrome Infrared Film 2443 as a negative

NASA Astrophysics Data System (ADS)

Klimes, D.; Ross, D. I.

1993-02-01

A process for the continuous dry-to-dry development of Kodak Aerochrome Infrared Film 2443 as a negative (CIR-neg) is described. The process is well suited for production processing of long film lengths. Chemicals from three commercial film processes are used with modifications. Sensitometric procedures are recommended for the monitoring of processing quality control. Sensitometric data and operational aerial exposures indicate that films developed in this process have approximately the same effective aerial film speed as films processed in the reversal process recommended by the manufacturer (Kodak EA-5). The CIR-neg process is useful when aerial photography is acquired for resources management applications which require print reproductions. Originals can be readily reproduced using conventional production equipment (electronic dodging) in black and white or color (color compensation).

Antibiotics with anaerobic ammonium oxidation in urban wastewater treatment

NASA Astrophysics Data System (ADS)

Zhou, Ruipeng; Yang, Yuanming

2017-05-01

Biofilter process is based on biological oxidation process on the introduction of fast water filter design ideas generated by an integrated filtration, adsorption and biological role of aerobic wastewater treatment process various purification processes. By engineering example, we show that the process is an ideal sewage and industrial wastewater treatment process of low concentration. Anaerobic ammonia oxidation process because of its advantage of the high efficiency and low consumption, wastewater biological denitrification field has broad application prospects. The process in practical wastewater treatment at home and abroad has become a hot spot. In this paper, anammox bacteria habitats and species diversity, and anaerobic ammonium oxidation process in the form of diversity, and one and split the process operating conditions are compared, focusing on a review of the anammox process technology various types of wastewater laboratory research and engineering applications, including general water quality and pressure filtrate sludge digestion, landfill leachate, aquaculture wastewater, monosodium glutamate wastewater, wastewater, sewage, fecal sewage, waste water salinity wastewater characteristics, research progress and application of the obstacles. Finally, we summarize the anaerobic ammonium oxidation process potential problems during the processing of the actual waste water, and proposed future research focus on in-depth study of water quality anammox obstacle factor and its regulatory policy, and vigorously develop on this basis, and combined process optimization.

Understanding scaling through history-dependent processes with collapsing sample space.

PubMed

Corominas-Murtra, Bernat; Hanel, Rudolf; Thurner, Stefan

2015-04-28

History-dependent processes are ubiquitous in natural and social systems. Many such stochastic processes, especially those that are associated with complex systems, become more constrained as they unfold, meaning that their sample space, or their set of possible outcomes, reduces as they age. We demonstrate that these sample-space-reducing (SSR) processes necessarily lead to Zipf's law in the rank distributions of their outcomes. We show that by adding noise to SSR processes the corresponding rank distributions remain exact power laws, p(x) ~ x(-λ), where the exponent directly corresponds to the mixing ratio of the SSR process and noise. This allows us to give a precise meaning to the scaling exponent in terms of the degree to which a given process reduces its sample space as it unfolds. Noisy SSR processes further allow us to explain a wide range of scaling exponents in frequency distributions ranging from α = 2 to ∞. We discuss several applications showing how SSR processes can be used to understand Zipf's law in word frequencies, and how they are related to diffusion processes in directed networks, or aging processes such as in fragmentation processes. SSR processes provide a new alternative to understand the origin of scaling in complex systems without the recourse to multiplicative, preferential, or self-organized critical processes.

Effects of Processing Parameters on the Forming Quality of C-Shaped Thermosetting Composite Laminates in Hot Diaphragm Forming Process

NASA Astrophysics Data System (ADS)

Bian, X. X.; Gu, Y. Z.; Sun, J.; Li, M.; Liu, W. P.; Zhang, Z. G.

2013-10-01

In this study, the effects of processing temperature and vacuum applying rate on the forming quality of C-shaped carbon fiber reinforced epoxy resin matrix composite laminates during hot diaphragm forming process were investigated. C-shaped prepreg preforms were produced using a home-made hot diaphragm forming equipment. The thickness variations of the preforms and the manufacturing defects after diaphragm forming process, including fiber wrinkling and voids, were evaluated to understand the forming mechanism. Furthermore, both interlaminar slipping friction and compaction behavior of the prepreg stacks were experimentally analyzed for showing the importance of the processing parameters. In addition, autoclave processing was used to cure the C-shaped preforms to investigate the changes of the defects before and after cure process. The results show that the C-shaped prepreg preforms with good forming quality can be achieved through increasing processing temperature and reducing vacuum applying rate, which obviously promote prepreg interlaminar slipping process. The process temperature and forming rate in hot diaphragm forming process strongly influence prepreg interply frictional force, and the maximum interlaminar frictional force can be taken as a key parameter for processing parameter optimization. Autoclave process is effective in eliminating voids in the preforms and can alleviate fiber wrinkles to a certain extent.

Assessment of Advanced Coal Gasification Processes

NASA Technical Reports Server (NTRS)

McCarthy, John; Ferrall, Joseph; Charng, Thomas; Houseman, John

1981-01-01

This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process; Bell Single-Stage High Mass Flux (HMF) Process; Cities Service/Rockwell (CS/R) Hydrogasification Process; Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences, strengths/weaknesses, and potential improvements to each process are identified. The AVCO HTG and the Bell HMF gasifiers share similarities with respect to: short residence time (SRT), high throughput rate, slagging and syngas as the initial raw product gas. The CS/R Hydrogasifier is also SRT but is non-slagging and produces a raw gas high in methane content. The Exxon CCG gasifier is a long residence time, catalytic, fluidbed reactor producing all of the raw product methane in the gasifier. The report makes the following assessments: 1) while each process has significant potential as coal gasifiers, the CS/R and Exxon processes are better suited for SNG production; 2) the Exxon process is the closest to a commercial level for near-term SNG production; and 3) the SRT processes require significant development including scale-up and turndown demonstration, char processing and/or utilization demonstration, and reactor control and safety features development.

Integrated Process Modeling-A Process Validation Life Cycle Companion.

PubMed

Zahel, Thomas; Hauer, Stefan; Mueller, Eric M; Murphy, Patrick; Abad, Sandra; Vasilieva, Elena; Maurer, Daniel; Brocard, Cécile; Reinisch, Daniela; Sagmeister, Patrick; Herwig, Christoph

2017-10-17

During the regulatory requested process validation of pharmaceutical manufacturing processes, companies aim to identify, control, and continuously monitor process variation and its impact on critical quality attributes (CQAs) of the final product. It is difficult to directly connect the impact of single process parameters (PPs) to final product CQAs, especially in biopharmaceutical process development and production, where multiple unit operations are stacked together and interact with each other. Therefore, we want to present the application of Monte Carlo (MC) simulation using an integrated process model (IPM) that enables estimation of process capability even in early stages of process validation. Once the IPM is established, its capability in risk and criticality assessment is furthermore demonstrated. IPMs can be used to enable holistic production control strategies that take interactions of process parameters of multiple unit operations into account. Moreover, IPMs can be trained with development data, refined with qualification runs, and maintained with routine manufacturing data which underlines the lifecycle concept. These applications will be shown by means of a process characterization study recently conducted at a world-leading contract manufacturing organization (CMO). The new IPM methodology therefore allows anticipation of out of specification (OOS) events, identify critical process parameters, and take risk-based decisions on counteractions that increase process robustness and decrease the likelihood of OOS events.

Effects of rigor status during high-pressure processing on the physical qualities of farm-raised abalone (Haliotis rufescens).

PubMed

Hughes, Brianna H; Greenberg, Neil J; Yang, Tom C; Skonberg, Denise I

2015-01-01

High-pressure processing (HPP) is used to increase meat safety and shelf-life, with conflicting quality effects depending on rigor status during HPP. In the seafood industry, HPP is used to shuck and pasteurize oysters, but its use on abalones has only been minimally evaluated and the effect of rigor status during HPP on abalone quality has not been reported. Farm-raised abalones (Haliotis rufescens) were divided into 12 HPP treatments and 1 unprocessed control treatment. Treatments were processed pre-rigor or post-rigor at 2 pressures (100 and 300 MPa) and 3 processing times (1, 3, and 5 min). The control was analyzed post-rigor. Uniform plugs were cut from adductor and foot meat for texture profile analysis, shear force, and color analysis. Subsamples were used for scanning electron microscopy of muscle ultrastructure. Texture profile analysis revealed that post-rigor processed abalone was significantly (P < 0.05) less firm and chewy than pre-rigor processed irrespective of muscle type, processing time, or pressure. L values increased with pressure to 68.9 at 300 MPa for pre-rigor processed foot, 73.8 for post-rigor processed foot, 90.9 for pre-rigor processed adductor, and 89.0 for post-rigor processed adductor. Scanning electron microscopy images showed fraying of collagen fibers in processed adductor, but did not show pressure-induced compaction of the foot myofibrils. Post-rigor processed abalone meat was more tender than pre-rigor processed meat, and post-rigor processed foot meat was lighter in color than pre-rigor processed foot meat, suggesting that waiting for rigor to resolve prior to processing abalones may improve consumer perceptions of quality and market value. © 2014 Institute of Food Technologists®

PROCESSING ALTERNATIVES FOR DESTRUCTION OF TETRAPHENYLBORATE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lambert, D; Thomas Peters, T; Samuel Fink, S

Two processes were chosen in the 1980's at the Savannah River Site (SRS) to decontaminate the soluble High Level Waste (HLW). The In Tank Precipitation (ITP) process (1,2) was developed at SRS for the removal of radioactive cesium and actinides from the soluble HLW. Sodium tetraphenylborate was added to the waste to precipitate cesium and monosodium titanate (MST) was added to adsorb actinides, primarily uranium and plutonium. Two products of this process were a low activity waste stream and a concentrated organic stream containing cesium tetraphenylborate and actinides adsorbed on monosodium titanate (MST). A copper catalyzed acid hydrolysis process wasmore » built to process (3, 4) the Tank 48H cesium tetraphenylborate waste in the SRS's Defense Waste Processing Facility (DWPF). Operation of the DWPF would have resulted in the production of benzene for incineration in SRS's Consolidated Incineration Facility. This process was abandoned together with the ITP process in 1998 due to high benzene in ITP caused by decomposition of excess sodium tetraphenylborate. Processing in ITP resulted in the production of approximately 1.0 million liters of HLW. SRS has chosen a solvent extraction process combined with adsorption of the actinides to decontaminate the soluble HLW stream (5). However, the waste in Tank 48H is incompatible with existing waste processing facilities. As a result, a processing facility is needed to disposition the HLW in Tank 48H. This paper will describe the process for searching for processing options by SRS task teams for the disposition of the waste in Tank 48H. In addition, attempts to develop a caustic hydrolysis process for in tank destruction of tetraphenylborate will be presented. Lastly, the development of both a caustic and acidic copper catalyzed peroxide oxidation process will be discussed.« less

Manufacturing Process Selection of Composite Bicycle’s Crank Arm using Analytical Hierarchy Process (AHP)

NASA Astrophysics Data System (ADS)

Luqman, M.; Rosli, M. U.; Khor, C. Y.; Zambree, Shayfull; Jahidi, H.

2018-03-01

Crank arm is one of the important parts in a bicycle that is an expensive product due to the high cost of material and production process. This research is aimed to investigate the potential type of manufacturing process to fabricate composite bicycle crank arm and to describe an approach based on analytical hierarchy process (AHP) that assists decision makers or manufacturing engineers in determining the most suitable process to be employed in manufacturing of composite bicycle crank arm at the early stage of the product development process to reduce the production cost. There are four types of processes were considered, namely resin transfer molding (RTM), compression molding (CM), vacuum bag molding and filament winding (FW). The analysis ranks these four types of process for its suitability in the manufacturing of bicycle crank arm based on five main selection factors and 10 sub factors. Determining the right manufacturing process was performed based on AHP process steps. Consistency test was performed to make sure the judgements are consistent during the comparison. The results indicated that the compression molding was the most appropriate manufacturing process because it has the highest value (33.6%) among the other manufacturing processes.

A System-Oriented Approach for the Optimal Control of Process Chains under Stochastic Influences

NASA Astrophysics Data System (ADS)

Senn, Melanie; Schäfer, Julian; Pollak, Jürgen; Link, Norbert

2011-09-01

Process chains in manufacturing consist of multiple connected processes in terms of dynamic systems. The properties of a product passing through such a process chain are influenced by the transformation of each single process. There exist various methods for the control of individual processes, such as classical state controllers from cybernetics or function mapping approaches realized by statistical learning. These controllers ensure that a desired state is obtained at process end despite of variations in the input and disturbances. The interactions between the single processes are thereby neglected, but play an important role in the optimization of the entire process chain. We divide the overall optimization into two phases: (1) the solution of the optimization problem by Dynamic Programming to find the optimal control variable values for each process for any encountered end state of its predecessor and (2) the application of the optimal control variables at runtime for the detected initial process state. The optimization problem is solved by selecting adequate control variables for each process in the chain backwards based on predefined quality requirements for the final product. For the demonstration of the proposed concept, we have chosen a process chain from sheet metal manufacturing with simplified transformation functions.

Quantitative analysis of geomorphic processes using satellite image data at different scales

NASA Technical Reports Server (NTRS)

Williams, R. S., Jr.

1985-01-01

When aerial and satellite photographs and images are used in the quantitative analysis of geomorphic processes, either through direct observation of active processes or by analysis of landforms resulting from inferred active or dormant processes, a number of limitations in the use of such data must be considered. Active geomorphic processes work at different scales and rates. Therefore, the capability of imaging an active or dormant process depends primarily on the scale of the process and the spatial-resolution characteristic of the imaging system. Scale is an important factor in recording continuous and discontinuous active geomorphic processes, because what is not recorded will not be considered or even suspected in the analysis of orbital images. If the geomorphic process of landform change caused by the process is less than 200 m in x to y dimension, then it will not be recorded. Although the scale factor is critical, in the recording of discontinuous active geomorphic processes, the repeat interval of orbital-image acquisition of a planetary surface also is a consideration in order to capture a recurring short-lived geomorphic process or to record changes caused by either a continuous or a discontinuous geomorphic process.

Remote Sensing Image Quality Assessment Experiment with Post-Processing

NASA Astrophysics Data System (ADS)

Jiang, W.; Chen, S.; Wang, X.; Huang, Q.; Shi, H.; Man, Y.

2018-04-01

This paper briefly describes the post-processing influence assessment experiment, the experiment includes three steps: the physical simulation, image processing, and image quality assessment. The physical simulation models sampled imaging system in laboratory, the imaging system parameters are tested, the digital image serving as image processing input are produced by this imaging system with the same imaging system parameters. The gathered optical sampled images with the tested imaging parameters are processed by 3 digital image processes, including calibration pre-processing, lossy compression with different compression ratio and image post-processing with different core. Image quality assessment method used is just noticeable difference (JND) subject assessment based on ISO20462, through subject assessment of the gathered and processing images, the influence of different imaging parameters and post-processing to image quality can be found. The six JND subject assessment experimental data can be validated each other. Main conclusions include: image post-processing can improve image quality; image post-processing can improve image quality even with lossy compression, image quality with higher compression ratio improves less than lower ratio; with our image post-processing method, image quality is better, when camera MTF being within a small range.

Microstructure and Texture of Al-2.5wt.%Mg Processed by Combining Accumulative Roll Bonding and Conventional Rolling

NASA Astrophysics Data System (ADS)

Gatti, J. R.; Bhattacharjee, P. P.

2014-12-01

Evolution of microstructure and texture during severe deformation and annealing was studied in Al-2.5%Mg alloy processed by two different routes, namely, monotonic Accumulative Roll Bonding (ARB) and a hybrid route combining ARB and conventional rolling (CR). For this purpose Al-2.5%Mg sheets were subjected to 5 cycles of monotonic ARB (equivalent strain (ɛeq) = 4.0) processing while in the hybrid route (ARB + CR) 3 cycle ARB-processed sheets were further deformed by conventional rolling to 75% reduction in thickness (ɛeq = 4.0). Although formation of ultrafine structure was observed in the two processing routes, the monotonic ARB—processed material showed finer microstructure but weak texture as compared to the ARB + CR—processed material. After complete recrystallization, the ARB + CR-processed material showed weak cube texture ({001}<100>) but the cube component was almost negligible in the monotonic ARB-processed material-processed material. However, the ND-rotated cube components were stronger in the monotonic ARB-processed material-processed material. The observed differences in the microstructure and texture evolution during deformation and annealing could be explained by the characteristic differences of the two processing routes.

Process Materialization Using Templates and Rules to Design Flexible Process Models

NASA Astrophysics Data System (ADS)

Kumar, Akhil; Yao, Wen

The main idea in this paper is to show how flexible processes can be designed by combining generic process templates and business rules. We instantiate a process by applying rules to specific case data, and running a materialization algorithm. The customized process instance is then executed in an existing workflow engine. We present an architecture and also give an algorithm for process materialization. The rules are written in a logic-based language like Prolog. Our focus is on capturing deeper process knowledge and achieving a holistic approach to robust process design that encompasses control flow, resources and data, as well as makes it easier to accommodate changes to business policy.

HMI conventions for process control graphics.

PubMed

Pikaar, Ruud N

2012-01-01

Process operators supervise and control complex processes. To enable the operator to do an adequate job, instrumentation and process control engineers need to address several related topics, such as console design, information design, navigation, and alarm management. In process control upgrade projects, usually a 1:1 conversion of existing graphics is proposed. This paper suggests another approach, efficiently leading to a reduced number of new powerful process graphics, supported by a permanent process overview displays. In addition a road map for structuring content (process information) and conventions for the presentation of objects, symbols, and so on, has been developed. The impact of the human factors engineering approach on process control upgrade projects is illustrated by several cases.

A novel processed food classification system applied to Australian food composition databases.

PubMed

O'Halloran, S A; Lacy, K E; Grimes, C A; Woods, J; Campbell, K J; Nowson, C A

2017-08-01

The extent of food processing can affect the nutritional quality of foodstuffs. Categorising foods by the level of processing emphasises the differences in nutritional quality between foods within the same food group and is likely useful for determining dietary processed food consumption. The present study aimed to categorise foods within Australian food composition databases according to the level of food processing using a processed food classification system, as well as assess the variation in the levels of processing within food groups. A processed foods classification system was applied to food and beverage items contained within Australian Food and Nutrient (AUSNUT) 2007 (n = 3874) and AUSNUT 2011-13 (n = 5740). The proportion of Minimally Processed (MP), Processed Culinary Ingredients (PCI) Processed (P) and Ultra Processed (ULP) by AUSNUT food group and the overall proportion of the four processed food categories across AUSNUT 2007 and AUSNUT 2011-13 were calculated. Across the food composition databases, the overall proportions of foods classified as MP, PCI, P and ULP were 27%, 3%, 26% and 44% for AUSNUT 2007 and 38%, 2%, 24% and 36% for AUSNUT 2011-13. Although there was wide variation in the classifications of food processing within the food groups, approximately one-third of foodstuffs were classified as ULP food items across both the 2007 and 2011-13 AUSNUT databases. This Australian processed food classification system will allow researchers to easily quantify the contribution of processed foods within the Australian food supply to assist in assessing the nutritional quality of the dietary intake of population groups. © 2017 The British Dietetic Association Ltd.

Process and domain specificity in regions engaged for face processing: an fMRI study of perceptual differentiation.

PubMed

Collins, Heather R; Zhu, Xun; Bhatt, Ramesh S; Clark, Jonathan D; Joseph, Jane E

2012-12-01

The degree to which face-specific brain regions are specialized for different kinds of perceptual processing is debated. This study parametrically varied demands on featural, first-order configural, or second-order configural processing of faces and houses in a perceptual matching task to determine the extent to which the process of perceptual differentiation was selective for faces regardless of processing type (domain-specific account), specialized for specific types of perceptual processing regardless of category (process-specific account), engaged in category-optimized processing (i.e., configural face processing or featural house processing), or reflected generalized perceptual differentiation (i.e., differentiation that crosses category and processing type boundaries). ROIs were identified in a separate localizer run or with a similarity regressor in the face-matching runs. The predominant principle accounting for fMRI signal modulation in most regions was generalized perceptual differentiation. Nearly all regions showed perceptual differentiation for both faces and houses for more than one processing type, even if the region was identified as face-preferential in the localizer run. Consistent with process specificity, some regions showed perceptual differentiation for first-order processing of faces and houses (right fusiform face area and occipito-temporal cortex and right lateral occipital complex), but not for featural or second-order processing. Somewhat consistent with domain specificity, the right inferior frontal gyrus showed perceptual differentiation only for faces in the featural matching task. The present findings demonstrate that the majority of regions involved in perceptual differentiation of faces are also involved in differentiation of other visually homogenous categories.

Process- and Domain-Specificity in Regions Engaged for Face Processing: An fMRI Study of Perceptual Differentiation

PubMed Central

Collins, Heather R.; Zhu, Xun; Bhatt, Ramesh S.; Clark, Jonathan D.; Joseph, Jane E.

2015-01-01

The degree to which face-specific brain regions are specialized for different kinds of perceptual processing is debated. The present study parametrically varied demands on featural, first-order configural or second-order configural processing of faces and houses in a perceptual matching task to determine the extent to which the process of perceptual differentiation was selective for faces regardless of processing type (domain-specific account), specialized for specific types of perceptual processing regardless of category (process-specific account), engaged in category-optimized processing (i.e., configural face processing or featural house processing) or reflected generalized perceptual differentiation (i.e. differentiation that crosses category and processing type boundaries). Regions of interest were identified in a separate localizer run or with a similarity regressor in the face-matching runs. The predominant principle accounting for fMRI signal modulation in most regions was generalized perceptual differentiation. Nearly all regions showed perceptual differentiation for both faces and houses for more than one processing type, even if the region was identified as face-preferential in the localizer run. Consistent with process-specificity, some regions showed perceptual differentiation for first-order processing of faces and houses (right fusiform face area and occipito-temporal cortex, and right lateral occipital complex), but not for featural or second-order processing. Somewhat consistent with domain-specificity, the right inferior frontal gyrus showed perceptual differentiation only for faces in the featural matching task. The present findings demonstrate that the majority of regions involved in perceptual differentiation of faces are also involved in differentiation of other visually homogenous categories. PMID:22849402

Achieving Continuous Manufacturing for Final Dosage Formation: Challenges and How to Meet Them May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Byrn, Stephen; Futran, Maricio; Thomas, Hayden; Jayjock, Eric; Maron, Nicola; Meyer, Robert F; Myerson, Allan S; Thien, Michael P; Trout, Bernhardt L

2015-03-01

We describe the key issues and possibilities for continuous final dosage formation, otherwise known as downstream processing or drug product manufacturing. A distinction is made between heterogeneous processing and homogeneous processing, the latter of which is expected to add more value to continuous manufacturing. We also give the key motivations for moving to continuous manufacturing, some of the exciting new technologies, and the barriers to implementation of continuous manufacturing. Continuous processing of heterogeneous blends is the natural first step in converting existing batch processes to continuous. In heterogeneous processing, there are discrete particles that can segregate, versus in homogeneous processing, components are blended and homogenized such that they do not segregate. Heterogeneous processing can incorporate technologies that are closer to existing technologies, where homogeneous processing necessitates the development and incorporation of new technologies. Homogeneous processing has the greatest potential for reaping the full rewards of continuous manufacturing, but it takes long-term vision and a more significant change in process development than heterogeneous processing. Heterogeneous processing has the detriment that, as the technologies are adopted rather than developed, there is a strong tendency to incorporate correction steps, what we call below "The Rube Goldberg Problem." Thus, although heterogeneous processing will likely play a major role in the near-term transformation of heterogeneous to continuous processing, it is expected that homogeneous processing is the next step that will follow. Specific action items for industry leaders are. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

An Analysis of the Air Force Government Operated Civil Engineering Supply Store Logistic System: How Can It Be Improved?

DTIC Science & Technology

1990-09-01

6 Logistics Systems ............ 7 GOCESS Operation . . . . . . . ..... 9 Work Order Processing . . . . ... 12 Job Order Processing . . . . . . . . . . 14...orders and job orders to the Material Control Section will be discussed separately. Work Order Processing . Figure 2 illustrates typical WO processing...logistics function. The JO processing is similar. Job Order Processing . Figure 3 illustrates typical JO processing in a GOCESS operation. As with WOs, this

Adaptive-optics optical coherence tomography processing using a graphics processing unit.

PubMed

Shafer, Brandon A; Kriske, Jeffery E; Kocaoglu, Omer P; Turner, Timothy L; Liu, Zhuolin; Lee, John Jaehwan; Miller, Donald T

2014-01-01

Graphics processing units are increasingly being used for scientific computing for their powerful parallel processing abilities, and moderate price compared to super computers and computing grids. In this paper we have used a general purpose graphics processing unit to process adaptive-optics optical coherence tomography (AOOCT) images in real time. Increasing the processing speed of AOOCT is an essential step in moving the super high resolution technology closer to clinical viability.

Data processing system for the Sneg-2MP experiment

NASA Technical Reports Server (NTRS)

Gavrilova, Y. A.

1980-01-01

The data processing system for scientific experiments on stations of the "Prognoz" type provides for the processing sequence to be broken down into a number of consecutive stages: preliminary processing, primary processing, secondary processing. The tasks of each data processing stage are examined for an experiment designed to study gamma flashes of galactic origin and solar flares lasting from several minutes to seconds in the 20 kev to 1000 kev energy range.

General RMP Guidance - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

OSHA's Process Safety Management (PSM) Guidance on providing complete and accurate written information concerning process chemicals, process technology, and process equipment; including process hazard analysis and material safety data sheets.

Elaboration Likelihood and the Counseling Process: The Role of Affect.

ERIC Educational Resources Information Center

Stoltenberg, Cal D.; And Others

The role of affect in counseling has been examined from several orientations. The depth of processing model views the efficiency of information processing as a function of the extent to which the information is processed. The notion of cognitive processing capacity states that processing information at deeper levels engages more of one's limited…

5 CFR 582.202 - Service of legal process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Service of legal process. 582.202 Section... GARNISHMENT OF FEDERAL EMPLOYEES' PAY Service of Legal Process § 582.202 Service of legal process. (a) A person using this part shall serve interrogatories and legal process on the agent to receive process as...

5 CFR 582.202 - Service of legal process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Service of legal process. 582.202 Section... GARNISHMENT OF FEDERAL EMPLOYEES' PAY Service of Legal Process § 582.202 Service of legal process. (a) A person using this part shall serve interrogatories and legal process on the agent to receive process as...

Information Processing Concepts: A Cure for "Technofright." Information Processing in the Electronic Office. Part 1: Concepts.

ERIC Educational Resources Information Center

Popyk, Marilyn K.

1986-01-01

Discusses the new automated office and its six major technologies (data processing, word processing, graphics, image, voice, and networking), the information processing cycle (input, processing, output, distribution/communication, and storage and retrieval), ergonomics, and ways to expand office education classes (versus class instruction). (CT)

Facial Speech Gestures: The Relation between Visual Speech Processing, Phonological Awareness, and Developmental Dyslexia in 10-Year-Olds

ERIC Educational Resources Information Center

Schaadt, Gesa; Männel, Claudia; van der Meer, Elke; Pannekamp, Ann; Friederici, Angela D.

2016-01-01

Successful communication in everyday life crucially involves the processing of auditory and visual components of speech. Viewing our interlocutor and processing visual components of speech facilitates speech processing by triggering auditory processing. Auditory phoneme processing, analyzed by event-related brain potentials (ERP), has been shown…

40 CFR 65.62 - Process vent group determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., or Group 2B) for each process vent. Group 1 process vents require control, and Group 2A and 2B... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Process vent group determination. 65... (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Process Vents § 65.62 Process vent group determination. (a) Group...

40 CFR 63.138 - Process wastewater provisions-performance standards for treatment processes managing Group 1...

Code of Federal Regulations, 2010 CFR

2010-07-01

.../or Table 9 compounds are similar and often identical. (3) Biological treatment processes. Biological treatment processes in compliance with this section may be either open or closed biological treatment processes as defined in § 63.111. An open biological treatment process in compliance with this section need...

5 CFR 581.202 - Service of process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Service of process. 581.202 Section 581... GARNISHMENT ORDERS FOR CHILD SUPPORT AND/OR ALIMONY Service of Process § 581.202 Service of process. (a) A... facilitate proper service of process on its designated agent(s). If legal process is not directed to any...

30 CFR 828.11 - In situ processing: Performance standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false In situ processing: Performance standards. 828... STANDARDS-IN SITU PROCESSING § 828.11 In situ processing: Performance standards. (a) The person who conducts in situ processing activities shall comply with 30 CFR 817 and this section. (b) In situ processing...

30 CFR 828.11 - In situ processing: Performance standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false In situ processing: Performance standards. 828... STANDARDS-IN SITU PROCESSING § 828.11 In situ processing: Performance standards. (a) The person who conducts in situ processing activities shall comply with 30 CFR 817 and this section. (b) In situ processing...

30 CFR 828.11 - In situ processing: Performance standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 3 2013-07-01 2013-07-01 false In situ processing: Performance standards. 828... STANDARDS-IN SITU PROCESSING § 828.11 In situ processing: Performance standards. (a) The person who conducts in situ processing activities shall comply with 30 CFR 817 and this section. (b) In situ processing...

30 CFR 828.11 - In situ processing: Performance standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false In situ processing: Performance standards. 828... STANDARDS-IN SITU PROCESSING § 828.11 In situ processing: Performance standards. (a) The person who conducts in situ processing activities shall comply with 30 CFR 817 and this section. (b) In situ processing...

30 CFR 828.11 - In situ processing: Performance standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 3 2014-07-01 2014-07-01 false In situ processing: Performance standards. 828... STANDARDS-IN SITU PROCESSING § 828.11 In situ processing: Performance standards. (a) The person who conducts in situ processing activities shall comply with 30 CFR 817 and this section. (b) In situ processing...

Processing Depth, Elaboration of Encoding, Memory Stores, and Expended Processing Capacity.

ERIC Educational Resources Information Center

Eysenck, Michael W.; Eysenck, M. Christine

1979-01-01

The effects of several factors on expended processing capacity were measured. Expended processing capacity was greater when information was retrieved from secondary memory than from primary memory, when processing was of a deep, semantic nature than when it was shallow and physical, and when processing was more elaborate. (Author/GDC)

Speed isn’t everything: Complex processing speed measures mask individual differences and developmental changes in executive control

PubMed Central

Cepeda, Nicholas J.; Blackwell, Katharine A.; Munakata, Yuko

2012-01-01

The rate at which people process information appears to influence many aspects of cognition across the lifespan. However, many commonly accepted measures of “processing speed” may require goal maintenance, manipulation of information in working memory, and decision-making, blurring the distinction between processing speed and executive control and resulting in overestimation of processing-speed contributions to cognition. This concern may apply particularly to studies of developmental change, as even seemingly simple processing speed measures may require executive processes to keep children and older adults on task. We report two new studies and a re-analysis of a published study, testing predictions about how different processing speed measures influence conclusions about executive control across the life span. We find that the choice of processing speed measure affects the relationship observed between processing speed and executive control, in a manner that changes with age, and that choice of processing speed measure affects conclusions about development and the relationship among executive control measures. Implications for understanding processing speed, executive control, and their development are discussed. PMID:23432836

The impact of working memory and the “process of process modelling” on model quality: Investigating experienced versus inexperienced modellers

NASA Astrophysics Data System (ADS)

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R.; Weber, Barbara

2016-05-01

A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling.

A new class of random processes with application to helicopter noise

NASA Technical Reports Server (NTRS)

Hardin, Jay C.; Miamee, A. G.

1989-01-01

The concept of dividing random processes into classes (e.g., stationary, locally stationary, periodically correlated, and harmonizable) has long been employed. A new class of random processes is introduced which includes many of these processes as well as other interesting processes which fall into none of the above classes. Such random processes are denoted as linearly correlated. This class is shown to include the familiar stationary and periodically correlated processes as well as many other, both harmonizable and non-harmonizable, nonstationary processes. When a process is linearly correlated for all t and harmonizable, its two-dimensional power spectral density S(x) (omega 1, omega 2) is shown to take a particularly simple form, being non-zero only on lines such that omega 1 to omega 2 = + or - r(k) where the r(k's) are (not necessarily equally spaced) roots of a characteristic function. The relationship of such processes to the class of stationary processes is examined. In addition, the application of such processes in the analysis of typical helicopter noise signals is described.

The impact of working memory and the “process of process modelling” on model quality: Investigating experienced versus inexperienced modellers

PubMed Central

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R.; Weber, Barbara

2016-01-01

A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling. PMID:27157858

A new class of random processes with application to helicopter noise

NASA Technical Reports Server (NTRS)

Hardin, Jay C.; Miamee, A. G.

1989-01-01

The concept of dividing random processes into classes (e.g., stationary, locally stationary, periodically correlated, and harmonizable) has long been employed. A new class of random processes is introduced which includes many of these processes as well as other interesting processes which fall into none of the above classes. Such random processes are denoted as linearly correlated. This class is shown to include the familiar stationary and periodically correlated processes as well as many other, both harmonizable and non-harmonizable, nonstationary processes. When a process is linearly correlated for all t and harmonizable, its two-dimensional power spectral density S(x)(omega 1, omega 2) is shown to take a particularly simple form, being non-zero only on lines such that omega 1 to omega 2 = + or - r(k) where the r(k's) are (not necessarily equally spaced) roots of a characteristic function. The relationship of such processes to the class of stationary processes is examined. In addition, the application of such processes in the analysis of typical helicopter noise signals is described.

The impact of working memory and the "process of process modelling" on model quality: Investigating experienced versus inexperienced modellers.

PubMed

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R; Weber, Barbara

2016-05-09

A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling.

Rapid Automatized Naming in Children with Dyslexia: Is Inhibitory Control Involved?

PubMed

Bexkens, Anika; van den Wildenberg, Wery P M; Tijms, Jurgen

2015-08-01

Rapid automatized naming (RAN) is widely seen as an important indicator of dyslexia. The nature of the cognitive processes involved in rapid naming is however still a topic of controversy. We hypothesized that in addition to the involvement of phonological processes and processing speed, RAN is a function of inhibition processes, in particular of interference control. A total 86 children with dyslexia and 31 normal readers were recruited. Our results revealed that in addition to phonological processing and processing speed, interference control predicts rapid naming in dyslexia, but in contrast to these other two cognitive processes, inhibition is not significantly associated with their reading and spelling skills. After variance in reading and spelling associated with processing speed, interference control and phonological processing was partialled out, naming speed was no longer consistently associated with the reading and spelling skills of children with dyslexia. Finally, dyslexic children differed from normal readers on naming speed, literacy skills, phonological processing and processing speed, but not on inhibition processes. Both theoretical and clinical interpretations of these results are discussed. Copyright © 2014 John Wiley & Sons, Ltd.

Feasibility of using continuous chromatography in downstream processing: Comparison of costs and product quality for a hybrid process vs. a conventional batch process.

PubMed

Ötes, Ozan; Flato, Hendrik; Winderl, Johannes; Hubbuch, Jürgen; Capito, Florian

2017-10-10

The protein A capture step is the main cost-driver in downstream processing, with high attrition costs especially when using protein A resin not until end of resin lifetime. Here we describe a feasibility study, transferring a batch downstream process to a hybrid process, aimed at replacing batch protein A capture chromatography with a continuous capture step, while leaving the polishing steps unchanged to minimize required process adaptations compared to a batch process. 35g of antibody were purified using the hybrid approach, resulting in comparable product quality and step yield compared to the batch process. Productivity for the protein A step could be increased up to 420%, reducing buffer amounts by 30-40% and showing robustness for at least 48h continuous run time. Additionally, to enable its potential application in a clinical trial manufacturing environment cost of goods were compared for the protein A step between hybrid process and batch process, showing a 300% cost reduction, depending on processed volumes and batch cycles. Copyright © 2017 Elsevier B.V. All rights reserved.

Non-Conscious Perception of Emotions in Psychiatric Disorders: The Unsolved Puzzle of Psychopathology.

PubMed

Lee, Seung A; Kim, Chai-Youn; Lee, Seung-Hwan

2016-03-01

Psychophysiological and functional neuroimaging studies have frequently and consistently shown that emotional information can be processed outside of the conscious awareness. Non-conscious processing comprises automatic, uncontrolled, and fast processing that occurs without subjective awareness. However, how such non-conscious emotional processing occurs in patients with various psychiatric disorders requires further examination. In this article, we reviewed and discussed previous studies on the non-conscious emotional processing in patients diagnosed with anxiety disorder, schizophrenia, bipolar disorder, and depression, to further understand how non-conscious emotional processing varies across these psychiatric disorders. Although the symptom profile of each disorder does not often overlap with one another, these patients commonly show abnormal emotional processing based on the pathology of their mood and cognitive function. This indicates that the observed abnormalities of emotional processing in certain social interactions may derive from a biased mood or cognition process that precedes consciously controlled and voluntary processes. Since preconscious forms of emotional processing appear to have a major effect on behaviour and cognition in patients with these disorders, further investigation is required to understand these processes and their impact on patient pathology.

Empirical evaluation of the Process Overview Measure for assessing situation awareness in process plants.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-03-01

The Process Overview Measure is a query-based measure developed to assess operator situation awareness (SA) from monitoring process plants. A companion paper describes how the measure has been developed according to process plant properties and operator cognitive work. The Process Overview Measure demonstrated practicality, sensitivity, validity and reliability in two full-scope simulator experiments investigating dramatically different operational concepts. Practicality was assessed based on qualitative feedback of participants and researchers. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA in full-scope simulator settings based on data collected on process experts. Thus, full-scope simulator studies can employ the Process Overview Measure to reveal the impact of new control room technology and operational concepts on monitoring process plants. Practitioner Summary: The Process Overview Measure is a query-based measure that demonstrated practicality, sensitivity, validity and reliability for assessing operator situation awareness (SA) from monitoring process plants in representative settings.

A Framework for Business Process Change Requirements Analysis

NASA Astrophysics Data System (ADS)

Grover, Varun; Otim, Samuel

The ability to quickly and continually adapt business processes to accommodate evolving requirements and opportunities is critical for success in competitive environments. Without appropriate linkage between redesign decisions and strategic inputs, identifying processes that need to be modified will be difficult. In this paper, we draw attention to the analysis of business process change requirements in support of process change initiatives. Business process redesign is a multifaceted phenomenon involving processes, organizational structure, management systems, human resource architecture, and many other aspects of organizational life. To be successful, the business process initiative should focus not only on identifying the processes to be redesigned, but also pay attention to various enablers of change. Above all, a framework is just a blueprint; management must lead change. We hope our modest contribution will draw attention to the broader framing of requirements for business process change.

Process Analytical Technology (PAT): batch-to-batch reproducibility of fermentation processes by robust process operational design and control.

PubMed

Gnoth, S; Jenzsch, M; Simutis, R; Lübbert, A

2007-10-31

The Process Analytical Technology (PAT) initiative of the FDA is a reaction on the increasing discrepancy between current possibilities in process supervision and control of pharmaceutical production processes and its current application in industrial manufacturing processes. With rigid approval practices based on standard operational procedures, adaptations of production reactors towards the state of the art were more or less inhibited for long years. Now PAT paves the way for continuous process and product improvements through improved process supervision based on knowledge-based data analysis, "Quality-by-Design"-concepts, and, finally, through feedback control. Examples of up-to-date implementations of this concept are presented. They are taken from one key group of processes in recombinant pharmaceutical protein manufacturing, the cultivations of genetically modified Escherichia coli bacteria.

When teams shift among processes: insights from simulation and optimization.

PubMed

Kennedy, Deanna M; McComb, Sara A

2014-09-01

This article introduces process shifts to study the temporal interplay among transition and action processes espoused in the recurring phase model proposed by Marks, Mathieu, and Zacarro (2001). Process shifts are those points in time when teams complete a focal process and change to another process. By using team communication patterns to measure process shifts, this research explores (a) when teams shift among different transition processes and initiate action processes and (b) the potential of different interventions, such as communication directives, to manipulate process shift timing and order and, ultimately, team performance. Virtual experiments are employed to compare data from observed laboratory teams not receiving interventions, simulated teams receiving interventions, and optimal simulated teams generated using genetic algorithm procedures. Our results offer insights about the potential for different interventions to affect team performance. Moreover, certain interventions may promote discussions about key issues (e.g., tactical strategies) and facilitate shifting among transition processes in a manner that emulates optimal simulated teams' communication patterns. Thus, we contribute to theory regarding team processes in 2 important ways. First, we present process shifts as a way to explore the timing of when teams shift from transition to action processes. Second, we use virtual experimentation to identify those interventions with the greatest potential to affect performance by changing when teams shift among processes. Additionally, we employ computational methods including neural networks, simulation, and optimization, thereby demonstrating their applicability in conducting team research. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Nitrous oxide and methane emissions from different treatment processes in full-scale municipal wastewater treatment plants.

PubMed

Rena, Y G; Wang, J H; Li, H F; Zhang, J; Qi, P Y; Hu, Z

2013-01-01

Nitrous oxide (N2O) and methane (CH4) are two important greenhouse gases (GHG) emitted from biological nutrient removal (BNR) processes in municipal wastewater treatment plants (WWTP). In this study, three typical biological wastewater treatment processes were studied in WWTP of Northern China: pre-anaerobic carrousel oxidation ditch (A+OD) process, pre-anoxic anaerobic-anoxic-oxic (A-A/ A/O) process and reverse anaerobic-anoxic-oxic (r-A/ A/O) process. The N2O and CH4 emissions from these three different processes were measured in every processing unit of each WWTP. Results showed that N2O and CH4 were mainly discharged during the nitrification/denitrification process and the anaerobic/anoxic treatment process, respectively and the amounts of their formation and release were significantly influenced by different BNR processes implemented in these WWTP. The N2O conversion ratio of r-A/ A/O process was the lowest among the three WWTP, which were 10.9% and 18.6% lower than that of A-A/A/O process and A+OD process, respectively. Similarly, the CH4 conversion ratio of r-A/ A/O process was the lowest among the three WWTP, which were 89. I% and 80.8% lower than that of A-A/ A/O process and A+OD process, respectively. The factors influencing N2O and CH4 formation and emission in the three WWTP were investigated to explain the difference between these processes. The nitrite concentration and oxidation-reduction potential (ORP) value were found to be the dominant influencing factors affecting N2O and CH4 production, respectively. The flow-based emission factors of N2O and CH4 of the WWTP were figured out for better quantification of GHG emissions and further technical assessments of mitigation options.

Effects of children's working memory capacity and processing speed on their sentence imitation performance.

PubMed

Poll, Gerard H; Miller, Carol A; Mainela-Arnold, Elina; Adams, Katharine Donnelly; Misra, Maya; Park, Ji Sook

2013-01-01

More limited working memory capacity and slower processing for language and cognitive tasks are characteristics of many children with language difficulties. Individual differences in processing speed have not consistently been found to predict language ability or severity of language impairment. There are conflicting views on whether working memory and processing speed are integrated or separable abilities. To evaluate four models for the relations of individual differences in children's processing speed and working memory capacity in sentence imitation. The models considered whether working memory and processing speed are integrated or separable, as well as the effect of the number of operations required per sentence. The role of working memory as a mediator of the effect of processing speed on sentence imitation was also evaluated. Forty-six children with varied language and reading abilities imitated sentences. Working memory was measured with the Competing Language Processing Task (CLPT), and processing speed was measured with a composite of truth-value judgment and rapid automatized naming tasks. Mixed-effects ordinal regression models evaluated the CLPT and processing speed as predictors of sentence imitation item scores. A single mediator model evaluated working memory as a mediator of the effect of processing speed on sentence imitation total scores. Working memory was a reliable predictor of sentence imitation accuracy, but processing speed predicted sentence imitation only as a component of a processing speed by number of operations interaction. Processing speed predicted working memory capacity, and there was evidence that working memory acted as a mediator of the effect of processing speed on sentence imitation accuracy. The findings support a refined view of working memory and processing speed as separable factors in children's sentence imitation performance. Processing speed does not independently explain sentence imitation accuracy for all sentence types, but contributes when the task requires more mental operations. Processing speed also has an indirect effect on sentence imitation by contributing to working memory capacity. © 2013 Royal College of Speech and Language Therapists.

Q-marker based strategy for CMC research of Chinese medicine: A case study of Panax Notoginseng saponins.

PubMed

Zhong, Yi; Zhu, Jieqiang; Yang, Zhenzhong; Shao, Qing; Fan, Xiaohui; Cheng, Yiyu

2018-01-31

To ensure pharmaceutical quality, chemistry, manufacturing and control (CMC) research is essential. However, due to the inherent complexity of Chinese medicine (CM), CMC study of CM remains a great challenge for academia, industry, and regulatory agencies. Recently, quality-marker (Q-marker) was proposed to establish quality standards or quality analysis approaches of Chinese medicine, which sheds a light on Chinese medicine's CMC study. Here manufacture processes of Panax Notoginseng Saponins (PNS) is taken as a case study and the present work is to establish a Q-marker based research strategy for CMC of Chinese medicine. The Q-markers of Panax Notoginseng Saponins (PNS) is selected and established by integrating chemical profile with pharmacological activities. Then, the key processes of PNS manufacturing are identified by material flow analysis. Furthermore, modeling algorithms are employed to explore the relationship between Q-markers and critical process parameters (CPPs) of the key processes. At last, CPPs of the key processes are optimized in order to improving the process efficiency. Among the 97 identified compounds, Notoginsenoside R 1 , ginsenoside Rg 1 , Re, Rb 1 and Rd are selected as the Q-markers of PNS. Our analysis on PNS manufacturing show the extraction process and column chromatography process are the key processes. With the CPPs of each process as the inputs and Q-markers' contents as the outputs, two process prediction models are built separately for the extraction process and column chromatography process of Panax notoginseng, which both possess good prediction ability. Based on the efficiency models of extraction process and column chromatography process we constructed, the optimal CPPs of both processes are calculated. Our results show that the Q-markers derived from CMC research strategy can be applied to analyze the manufacturing processes of Chinese medicine to assure product's quality and promote key processes' efficiency simultaneously. Copyright © 2018 Elsevier GmbH. All rights reserved.

PyMS: a Python toolkit for processing of gas chromatography-mass spectrometry (GC-MS) data. Application and comparative study of selected tools

PubMed Central

2012-01-01

Background Gas chromatography–mass spectrometry (GC-MS) is a technique frequently used in targeted and non-targeted measurements of metabolites. Most existing software tools for processing of raw instrument GC-MS data tightly integrate data processing methods with graphical user interface facilitating interactive data processing. While interactive processing remains critically important in GC-MS applications, high-throughput studies increasingly dictate the need for command line tools, suitable for scripting of high-throughput, customized processing pipelines. Results PyMS comprises a library of functions for processing of instrument GC-MS data developed in Python. PyMS currently provides a complete set of GC-MS processing functions, including reading of standard data formats (ANDI- MS/NetCDF and JCAMP-DX), noise smoothing, baseline correction, peak detection, peak deconvolution, peak integration, and peak alignment by dynamic programming. A novel common ion single quantitation algorithm allows automated, accurate quantitation of GC-MS electron impact (EI) fragmentation spectra when a large number of experiments are being analyzed. PyMS implements parallel processing for by-row and by-column data processing tasks based on Message Passing Interface (MPI), allowing processing to scale on multiple CPUs in distributed computing environments. A set of specifically designed experiments was performed in-house and used to comparatively evaluate the performance of PyMS and three widely used software packages for GC-MS data processing (AMDIS, AnalyzerPro, and XCMS). Conclusions PyMS is a novel software package for the processing of raw GC-MS data, particularly suitable for scripting of customized processing pipelines and for data processing in batch mode. PyMS provides limited graphical capabilities and can be used both for routine data processing and interactive/exploratory data analysis. In real-life GC-MS data processing scenarios PyMS performs as well or better than leading software packages. We demonstrate data processing scenarios simple to implement in PyMS, yet difficult to achieve with many conventional GC-MS data processing software. Automated sample processing and quantitation with PyMS can provide substantial time savings compared to more traditional interactive software systems that tightly integrate data processing with the graphical user interface. PMID:22647087

The Research Process on Converter Steelmaking Process by Using Limestone

NASA Astrophysics Data System (ADS)

Tang, Biao; Li, Xing-yi; Cheng, Han-chi; Wang, Jing; Zhang, Yun-long

2017-08-01

Compared with traditional converter steelmaking process, steelmaking process with limestone uses limestone to replace lime partly. A lot of researchers have studied about the new steelmaking process. There are much related research about material balance calculation, the behaviour of limestone in the slag, limestone powder injection in converter and application of limestone in iron and steel enterprises. The results show that the surplus heat of converter can meet the need of the limestone calcination, and the new process can reduce the steelmaking process energy loss in the whole steelmaking process, reduce carbon dioxide emissions, and improve the quality of the gas.

Gas processing handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-04-01

Brief details are given of processes including: BGC-Lurgi slagging gasification, COGAS, Exxon catalytic coal gasification, FW-Stoic 2-stage, GI two stage, HYGAS, Koppers-Totzek, Lurgi pressure gasification, Saarberg-Otto, Shell, Texaco, U-Gas, W-D.IGI, Wellman-Galusha, Westinghouse, and Winkler coal gasification processes; the Rectisol process; the Catacarb and the Benfield processes for removing CO/SUB/2, H/SUB/2s and COS from gases produced by the partial oxidation of coal; the selectamine DD, Selexol solvent, and Sulfinol gas cleaning processes; the sulphur-tolerant shift (SSK) process; and the Super-meth process for the production of high-Btu gas from synthesis gas.

Working on the Boundaries: Philosophies and Practices of the Design Process

NASA Technical Reports Server (NTRS)

Ryan, R.; Blair, J.; Townsend, J.; Verderaime, V.

1996-01-01

While systems engineering process is a program formal management technique and contractually binding, the design process is the informal practice of achieving the design project requirements throughout all design phases of the systems engineering process. The design process and organization are systems and component dependent. Informal reviews include technical information meetings and concurrent engineering sessions, and formal technical discipline reviews are conducted through the systems engineering process. This paper discusses and references major philosophical principles in the design process, identifies its role in interacting systems and disciplines analyses and integrations, and illustrates the process application in experienced aerostructural designs.

Chemical processing of lunar materials

NASA Technical Reports Server (NTRS)

Criswell, D. R.; Waldron, R. D.

1979-01-01

The paper highlights recent work on the general problem of processing lunar materials. The discussion covers lunar source materials, refined products, motivations for using lunar materials, and general considerations for a lunar or space processing plant. Attention is given to chemical processing through various techniques, including electrolysis of molten silicates, carbothermic/silicothermic reduction, carbo-chlorination process, NaOH basic-leach process, and HF acid-leach process. Several options for chemical processing of lunar materials are well within the state of the art of applied chemistry and chemical engineering to begin development based on the extensive knowledge of lunar materials.

Coordination and organization of security software process for power information application environment

NASA Astrophysics Data System (ADS)

Wang, Qiang

2017-09-01

As an important part of software engineering, the software process decides the success or failure of software product. The design and development feature of security software process is discussed, so is the necessity and the present significance of using such process. Coordinating the function software, the process for security software and its testing are deeply discussed. The process includes requirement analysis, design, coding, debug and testing, submission and maintenance. In each process, the paper proposed the subprocesses to support software security. As an example, the paper introduces the above process into the power information platform.

Sensor-based atomic layer deposition for rapid process learning and enhanced manufacturability

NASA Astrophysics Data System (ADS)

Lei, Wei

In the search for sensor based atomic layer deposition (ALD) process to accelerate process learning and enhance manufacturability, we have explored new reactor designs and applied in-situ process sensing to W and HfO 2 ALD processes. A novel wafer scale ALD reactor, which features fast gas switching, good process sensing compatibility and significant similarity to the real manufacturing environment, is constructed. The reactor has a unique movable reactor cap design that allows two possible operation modes: (1) steady-state flow with alternating gas species; or (2) fill-and-pump-out cycling of each gas, accelerating the pump-out by lifting the cap to employ the large chamber volume as ballast. Downstream quadrupole mass spectrometry (QMS) sampling is applied for in-situ process sensing of tungsten ALD process. The QMS reveals essential surface reaction dynamics through real-time signals associated with byproduct generation as well as precursor introduction and depletion for each ALD half cycle, which are then used for process learning and optimization. More subtle interactions such as imperfect surface saturation and reactant dose interaction are also directly observed by QMS, indicating that ALD process is more complicated than the suggested layer-by-layer growth. By integrating in real-time the byproduct QMS signals over each exposure and plotting it against process cycle number, the deposition kinetics on the wafer is directly measured. For continuous ALD runs, the total integrated byproduct QMS signal in each ALD run is also linear to ALD film thickness, and therefore can be used for ALD film thickness metrology. The in-situ process sensing is also applied to HfO2 ALD process that is carried out in a furnace type ALD reactor. Precursor dose end-point control is applied to precisely control the precursor dose in each half cycle. Multiple process sensors, including quartz crystal microbalance (QCM) and QMS are used to provide real time process information. The sensing results confirm the proposed surface reaction path and once again reveal the complexity of ALD processes. The impact of this work includes: (1) It explores new ALD reactor designs which enable the implementation of in-situ process sensors for rapid process learning and enhanced manufacturability; (2) It demonstrates in the first time that in-situ QMS can reveal detailed process dynamics and film growth kinetics in wafer-scale ALD process, and thus can be used for ALD film thickness metrology. (3) Based on results from two different processes carried out in two different reactors, it is clear that ALD is a more complicated process than normally believed or advertised, but real-time observation of the operational chemistries in ALD by in-situ sensors provides critical insight to the process and the basis for more effective process control for ALD applications.

Implicit Processes, Self-Regulation, and Interventions for Behavior Change.

PubMed

St Quinton, Tom; Brunton, Julie A

2017-01-01

The ability to regulate and subsequently change behavior is influenced by both reflective and implicit processes. Traditional theories have focused on conscious processes by highlighting the beliefs and intentions that influence decision making. However, their success in changing behavior has been modest with a gap between intention and behavior apparent. Dual-process models have been recently applied to health psychology; with numerous models incorporating implicit processes that influence behavior as well as the more common conscious processes. Such implicit processes are theorized to govern behavior non-consciously. The article provides a commentary on motivational and volitional processes and how interventions have combined to attempt an increase in positive health behaviors. Following this, non-conscious processes are discussed in terms of their theoretical underpinning. The article will then highlight how these processes have been measured and will then discuss the different ways that the non-conscious and conscious may interact. The development of interventions manipulating both processes may well prove crucial in successfully altering behavior.

All varieties of encoding variability are not created equal: Separating variable processing from variable tasks

PubMed Central

Huff, Mark J.; Bodner, Glen E.

2014-01-01

Whether encoding variability facilitates memory is shown to depend on whether item-specific and relational processing are both performed across study blocks, and whether study items are weakly versus strongly related. Variable-processing groups studied a word list once using an item-specific task and once using a relational task. Variable-task groups’ two different study tasks recruited the same type of processing each block. Repeated-task groups performed the same study task each block. Recall and recognition were greatest in the variable-processing group, but only with weakly related lists. A variable-processing benefit was also found when task-based processing and list-type processing were complementary (e.g., item-specific processing of a related list) rather than redundant (e.g., relational processing of a related list). That performing both item-specific and relational processing across trials, or within a trial, yields encoding-variability benefits may help reconcile decades of contradictory findings in this area. PMID:25018583

Continuous welding of unidirectional fiber reinforced thermoplastic tape material

NASA Astrophysics Data System (ADS)

Schledjewski, Ralf

2017-10-01

Continuous welding techniques like thermoplastic tape placement with in situ consolidation offer several advantages over traditional manufacturing processes like autoclave consolidation, thermoforming, etc. However, still there is a need to solve several important processing issues before it becomes a viable economic process. Intensive process analysis and optimization has been carried out in the past through experimental investigation, model definition and simulation development. Today process simulation is capable to predict resulting consolidation quality. Effects of material imperfections or process parameter variations are well known. But using this knowledge to control the process based on online process monitoring and according adaption of the process parameters is still challenging. Solving inverse problems and using methods for automated code generation allowing fast implementation of algorithms on targets are required. The paper explains the placement technique in general. Process-material-property-relationships and typical material imperfections are described. Furthermore, online monitoring techniques and how to use them for a model based process control system are presented.

Economics of polysilicon process: A view from Japan

NASA Technical Reports Server (NTRS)

Shimizu, Y.

1986-01-01

The production process of solar grade silicon (SOG-Si) through trichlorosilane (TCS) was researched in a program sponsored by New Energy Development Organization (NEDO). The NEDO process consists of the following two steps: TCS production from by-product silicon tetrachloride (STC) and SOG-Si formation from TCS using a fluidized bed reactor. Based on the data obtained during the research program, the manufacturing cost of the NEDO process and other polysilicon manufacturing processes were compared. The manufacturing cost was calculated on the basis of 1000 tons/year production. The cost estimate showed that the cost of producing silicon by all of the new processes is less than the cost by the conventional Siemens process. Using a new process, the cost of producing semiconductor grade silicon was found to be virtually the same with any to the TCS, diclorosilane, and monosilane processes when by-products were recycled. The SOG-Si manufacturing processes using the fluidized bed reactor, which needs further development, shows a greater probablility of cost reduction than the filament processes.

Autonomous Agents for Dynamic Process Planning in the Flexible Manufacturing System

NASA Astrophysics Data System (ADS)

Nik Nejad, Hossein Tehrani; Sugimura, Nobuhiro; Iwamura, Koji; Tanimizu, Yoshitaka

Rapid changes of market demands and pressures of competition require manufacturers to maintain highly flexible manufacturing systems to cope with a complex manufacturing environment. This paper deals with development of an agent-based architecture of dynamic systems for incremental process planning in the manufacturing systems. In consideration of alternative manufacturing processes and machine tools, the process plans and the schedules of the manufacturing resources are generated incrementally and dynamically. A negotiation protocol is discussed, in this paper, to generate suitable process plans for the target products real-timely and dynamically, based on the alternative manufacturing processes. The alternative manufacturing processes are presented by the process plan networks discussed in the previous paper, and the suitable process plans are searched and generated to cope with both the dynamic changes of the product specifications and the disturbances of the manufacturing resources. We initiatively combine the heuristic search algorithms of the process plan networks with the negotiation protocols, in order to generate suitable process plans in the dynamic manufacturing environment.

Implicit Processes, Self-Regulation, and Interventions for Behavior Change

PubMed Central

St Quinton, Tom; Brunton, Julie A.

2017-01-01

The ability to regulate and subsequently change behavior is influenced by both reflective and implicit processes. Traditional theories have focused on conscious processes by highlighting the beliefs and intentions that influence decision making. However, their success in changing behavior has been modest with a gap between intention and behavior apparent. Dual-process models have been recently applied to health psychology; with numerous models incorporating implicit processes that influence behavior as well as the more common conscious processes. Such implicit processes are theorized to govern behavior non-consciously. The article provides a commentary on motivational and volitional processes and how interventions have combined to attempt an increase in positive health behaviors. Following this, non-conscious processes are discussed in terms of their theoretical underpinning. The article will then highlight how these processes have been measured and will then discuss the different ways that the non-conscious and conscious may interact. The development of interventions manipulating both processes may well prove crucial in successfully altering behavior. PMID:28337164

Models of recognition: a review of arguments in favor of a dual-process account.

PubMed

Diana, Rachel A; Reder, Lynne M; Arndt, Jason; Park, Heekyeong

2006-02-01

The majority of computationally specified models of recognition memory have been based on a single-process interpretation, claiming that familiarity is the only influence on recognition. There is increasing evidence that recognition is, in fact, based on two processes: recollection and familiarity. This article reviews the current state of the evidence for dual-process models, including the usefulness of the remember/know paradigm, and interprets the relevant results in terms of the source of activation confusion (SAC) model of memory. We argue that the evidence from each of the areas we discuss, when combined, presents a strong case that inclusion of a recollection process is necessary. Given this conclusion, we also argue that the dual-process claim that the recollection process is always available is, in fact, more parsimonious than the single-process claim that the recollection process is used only in certain paradigms. The value of a well-specified process model such as the SAC model is discussed with regard to other types of dual-process models.

Integrating Thermal Tools Into the Mechanical Design Process

NASA Technical Reports Server (NTRS)

Tsuyuki, Glenn T.; Siebes, Georg; Novak, Keith S.; Kinsella, Gary M.

1999-01-01

The intent of mechanical design is to deliver a hardware product that meets or exceeds customer expectations, while reducing cycle time and cost. To this end, an integrated mechanical design process enables the idea of parallel development (concurrent engineering). This represents a shift from the traditional mechanical design process. With such a concurrent process, there are significant issues that have to be identified and addressed before re-engineering the mechanical design process to facilitate concurrent engineering. These issues also assist in the integration and re-engineering of the thermal design sub-process since it resides within the entire mechanical design process. With these issues in mind, a thermal design sub-process can be re-defined in a manner that has a higher probability of acceptance, thus enabling an integrated mechanical design process. However, the actual implementation is not always problem-free. Experience in applying the thermal design sub-process to actual situations provides the evidence for improvement, but more importantly, for judging the viability and feasibility of the sub-process.

[Monitoring method of extraction process for Schisandrae Chinensis Fructus based on near infrared spectroscopy and multivariate statistical process control].

PubMed

Xu, Min; Zhang, Lei; Yue, Hong-Shui; Pang, Hong-Wei; Ye, Zheng-Liang; Ding, Li

2017-10-01

To establish an on-line monitoring method for extraction process of Schisandrae Chinensis Fructus, the formula medicinal material of Yiqi Fumai lyophilized injection by combining near infrared spectroscopy with multi-variable data analysis technology. The multivariate statistical process control (MSPC) model was established based on 5 normal batches in production and 2 test batches were monitored by PC scores, DModX and Hotelling T2 control charts. The results showed that MSPC model had a good monitoring ability for the extraction process. The application of the MSPC model to actual production process could effectively achieve on-line monitoring for extraction process of Schisandrae Chinensis Fructus, and can reflect the change of material properties in the production process in real time. This established process monitoring method could provide reference for the application of process analysis technology in the process quality control of traditional Chinese medicine injections. Copyright© by the Chinese Pharmaceutical Association.

Method for automatically evaluating a transition from a batch manufacturing technique to a lean manufacturing technique

DOEpatents

Ivezic, Nenad; Potok, Thomas E.

2003-09-30

A method for automatically evaluating a manufacturing technique comprises the steps of: receiving from a user manufacturing process step parameters characterizing a manufacturing process; accepting from the user a selection for an analysis of a particular lean manufacturing technique; automatically compiling process step data for each process step in the manufacturing process; automatically calculating process metrics from a summation of the compiled process step data for each process step; and, presenting the automatically calculated process metrics to the user. A method for evaluating a transition from a batch manufacturing technique to a lean manufacturing technique can comprise the steps of: collecting manufacturing process step characterization parameters; selecting a lean manufacturing technique for analysis; communicating the selected lean manufacturing technique and the manufacturing process step characterization parameters to an automatic manufacturing technique evaluation engine having a mathematical model for generating manufacturing technique evaluation data; and, using the lean manufacturing technique evaluation data to determine whether to transition from an existing manufacturing technique to the selected lean manufacturing technique.

Process yield improvements with process control terminal for varian serial ion implanters

NASA Astrophysics Data System (ADS)

Higashi, Harry; Soni, Ameeta; Martinez, Larry; Week, Ken

Implant processes in a modern wafer production fab are extremely complex. There can be several types of misprocessing, i.e. wrong dose or species, double implants and missed implants. Process Control Terminals (PCT) for Varian 350Ds installed at Intel fabs were found to substantially reduce the number of misprocessing steps. This paper describes those misprocessing steps and their subsequent reduction with use of PCTs. Reliable and simple process control with serial process ion implanters has been in increasing demand. A well designed process control terminal greatly increases device yield by monitoring all pertinent implanter functions and enabling process engineering personnel to set up process recipes for simple and accurate system operation. By programming user-selectable interlocks, implant errors are reduced and those that occur are logged for further analysis and prevention. A process control terminal should also be compatible with office personal computers for greater flexibility in system use and data analysis. The impact from the capability of a process control terminal is increased productivity, ergo higher device yield.

An Aspect-Oriented Framework for Business Process Improvement

NASA Astrophysics Data System (ADS)

Pourshahid, Alireza; Mussbacher, Gunter; Amyot, Daniel; Weiss, Michael

Recently, many organizations invested in Business Process Management Systems (BPMSs) in order to automate and monitor their processes. Business Activity Monitoring is one of the essential modules of a BPMS as it provides the core monitoring capabilities. Although the natural step after process monitoring is process improvement, most of the existing systems do not provide the means to help users with the improvement step. In this paper, we address this issue by proposing an aspect-oriented framework that allows the impact of changes to business processes to be explored with what-if scenarios based on the most appropriate process redesign patterns among several possibilities. As the four cornerstones of a BPMS are process, goal, performance and validation views, these views need to be aligned automatically by any approach that intends to support automated improvement of business processes. Our framework therefore provides means to reflect process changes also in the other views of the business process. A health care case study presented as a proof of concept suggests that this novel approach is feasible.

Structure and Randomness of Continuous-Time, Discrete-Event Processes

NASA Astrophysics Data System (ADS)

Marzen, Sarah E.; Crutchfield, James P.

2017-10-01

Loosely speaking, the Shannon entropy rate is used to gauge a stochastic process' intrinsic randomness; the statistical complexity gives the cost of predicting the process. We calculate, for the first time, the entropy rate and statistical complexity of stochastic processes generated by finite unifilar hidden semi-Markov models—memoryful, state-dependent versions of renewal processes. Calculating these quantities requires introducing novel mathematical objects (ɛ -machines of hidden semi-Markov processes) and new information-theoretic methods to stochastic processes.

Combined mesophilic anaerobic and thermophilic aerobic digestion process for high-strength food wastewater to increase removal efficiency and reduce sludge discharge.

PubMed

Jang, H M; Park, S K; Ha, J H; Park, J M

2014-01-01

In this study, a process that combines the mesophilic anaerobic digestion (MAD) process with thermophilic aerobic digestion (TAD) for high-strength food wastewater (FWW) treatment was developed to examine the removal of organic matter and methane production. All effluent discharged from the MAD process was separated into solid and liquid portions. The liquid part was discarded and the sludge part was passed to the TAD process for further degradation. Then, the digested sludge from the TAD process was recycled back to the MAD unit to achieve low sludge discharge from the combined process. The reactor combination was operated in two phases: during Phase I, 40 d of total hydraulic retention time (HRT) was applied; during Phase II, 20 d was applied. HRT of the TAD process was fixed at 5 d. For a comparison, a control process (single-stage MAD) was operated with the same HRTs of the combined process. Our results indicated that the combined process showed over 90% total solids, volatile solids and chemical oxygen demand removal efficiencies. In addition, the combined process showed a significantly higher methane production rate than that of the control process. Consequently, the experimental data demonstrated that the combined MAD-TAD process was successfully employed for high-strength FWW treatment with highly efficient organic matter reduction and methane production.

Leading processes of patient care and treatment in hierarchical healthcare organizations in Sweden--process managers' experiences.

PubMed

Nilsson, Kerstin; Sandoff, Mette

2015-01-01

The purpose of this study is to gain better understanding of the roles and functions of process managers by describing Swedish process managers' experiences of leading processes involving patient care and treatment when working in a hierarchical health-care organization. This study is based on an explorative design. The data were gathered from interviews with 12 process managers at three Swedish hospitals. These data underwent qualitative and interpretative analysis with a modified editing style. The process managers' experiences of leading processes in a hierarchical health-care organization are described under three themes: having or not having a mandate, exposure to conflict situations and leading process development. The results indicate a need for clarity regarding process manager's responsibility and work content, which need to be communicated to all managers and staff involved in the patient care and treatment process, irrespective of department. There also needs to be an emphasis on realistic expectations and orientation of the goals that are an intrinsic part of the task of being a process manager. Generalizations from the results of the qualitative interview studies are limited, but a deeper understanding of the phenomenon was reached, which, in turn, can be transferred to similar settings. This study contributes qualitative descriptions of leading care and treatment processes in a functional, hierarchical health-care organization from process managers' experiences, a subject that has not been investigated earlier.

Information Technology Process Improvement Decision-Making: An Exploratory Study from the Perspective of Process Owners and Process Managers

ERIC Educational Resources Information Center

Lamp, Sandra A.

2012-01-01

There is information available in the literature that discusses information technology (IT) governance and investment decision making from an executive-level perception, yet there is little information available that offers the perspective of process owners and process managers pertaining to their role in IT process improvement and investment…

43 CFR 2884.17 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false How will BLM process my Processing...-WAY UNDER THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.17 How will BLM process my... written agreement that describes how BLM will process your application. The final agreement consists of a...

43 CFR 2884.17 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false How will BLM process my Processing...-WAY UNDER THE MINERAL LEASING ACT Applying for MLA Grants or TUPs § 2884.17 How will BLM process my... written agreement that describes how BLM will process your application. The final agreement consists of a...

15 CFR 15.3 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Acceptance of service of process. 15.3... Process § 15.3 Acceptance of service of process. (a) Except as otherwise provided in this subpart, any... employee by law is to be served personally with process. Service of process in this case is inadequate when...

Weaknesses in Applying a Process Approach in Industry Enterprises

NASA Astrophysics Data System (ADS)

Kučerová, Marta; Mĺkva, Miroslava; Fidlerová, Helena

2012-12-01

The paper deals with a process approach as one of the main principles of the quality management. Quality management systems based on process approach currently represents one of a proofed ways how to manage an organization. The volume of sales, costs and profit levels are influenced by quality of processes and efficient process flow. As results of the research project showed, there are some weaknesses in applying of the process approach in the industrial routine and it has been often only a formal change of the functional management to process management in many organizations in Slovakia. For efficient process management it is essential that companies take attention to the way how to organize their processes and seek for their continuous improvement.

Is Primary-Process Cognition a Feature of Hypnosis?

PubMed

Finn, Michael T; Goldman, Jared I; Lyon, Gyrid B; Nash, Michael R

2017-01-01

The division of cognition into primary and secondary processes is an important part of contemporary psychoanalytic metapsychology. Whereas primary processes are most characteristic of unconscious thought and loose associations, secondary processes generally govern conscious thought and logical reasoning. It has been theorized that an induction into hypnosis is accompanied by a predomination of primary-process cognition over secondary-process cognition. The authors hypothesized that highly hypnotizable individuals would demonstrate more primary-process cognition as measured by a recently developed cognitive-perceptual task. This hypothesis was not supported. In fact, low hypnotizable participants demonstrated higher levels of primary-process cognition. Exploratory analyses suggested a more specific effect: felt connectedness to the hypnotist seemed to promote secondary-process cognition among low hypnotizable participants.

[Dual process in large number estimation under uncertainty].

PubMed

Matsumuro, Miki; Miwa, Kazuhisa; Terai, Hitoshi; Yamada, Kento

2016-08-01

According to dual process theory, there are two systems in the mind: an intuitive and automatic System 1 and a logical and effortful System 2. While many previous studies about number estimation have focused on simple heuristics and automatic processes, the deliberative System 2 process has not been sufficiently studied. This study focused on the System 2 process for large number estimation. First, we described an estimation process based on participants’ verbal reports. The task, corresponding to the problem-solving process, consisted of creating subgoals, retrieving values, and applying operations. Second, we investigated the influence of such deliberative process by System 2 on intuitive estimation by System 1, using anchoring effects. The results of the experiment showed that the System 2 process could mitigate anchoring effects.

Object-processing neural efficiency differentiates object from spatial visualizers.

PubMed

Motes, Michael A; Malach, Rafael; Kozhevnikov, Maria

2008-11-19

The visual system processes object properties and spatial properties in distinct subsystems, and we hypothesized that this distinction might extend to individual differences in visual processing. We conducted a functional MRI study investigating the neural underpinnings of individual differences in object versus spatial visual processing. Nine participants of high object-processing ability ('object' visualizers) and eight participants of high spatial-processing ability ('spatial' visualizers) were scanned, while they performed an object-processing task. Object visualizers showed lower bilateral neural activity in lateral occipital complex and lower right-lateralized neural activity in dorsolateral prefrontal cortex. The data indicate that high object-processing ability is associated with more efficient use of visual-object resources, resulting in less neural activity in the object-processing pathway.

Process simulation for advanced composites production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allendorf, M.D.; Ferko, S.M.; Griffiths, S.

1997-04-01

The objective of this project is to improve the efficiency and lower the cost of chemical vapor deposition (CVD) processes used to manufacture advanced ceramics by providing the physical and chemical understanding necessary to optimize and control these processes. Project deliverables include: numerical process models; databases of thermodynamic and kinetic information related to the deposition process; and process sensors and software algorithms that can be used for process control. Target manufacturing techniques include CVD fiber coating technologies (used to deposit interfacial coatings on continuous fiber ceramic preforms), chemical vapor infiltration, thin-film deposition processes used in the glass industry, and coatingmore » techniques used to deposit wear-, abrasion-, and corrosion-resistant coatings for use in the pulp and paper, metals processing, and aluminum industries.« less

CDO budgeting

NASA Astrophysics Data System (ADS)

Nesladek, Pavel; Wiswesser, Andreas; Sass, Björn; Mauermann, Sebastian

2008-04-01

The Critical dimension off-target (CDO) is a key parameter for mask house customer, affecting directly the performance of the mask. The CDO is the difference between the feature size target and the measured feature size. The change of CD during the process is either compensated within the process or by data correction. These compensation methods are commonly called process bias and data bias, respectively. The difference between data bias and process bias in manufacturing results in systematic CDO error, however, this systematic error does not take into account the instability of the process bias. This instability is a result of minor variations - instabilities of manufacturing processes and changes in materials and/or logistics. Using several masks the CDO of the manufacturing line can be estimated. For systematic investigation of the unit process contribution to CDO and analysis of the factors influencing the CDO contributors, a solid understanding of each unit process and huge number of masks is necessary. Rough identification of contributing processes and splitting of the final CDO variation between processes can be done with approx. 50 masks with identical design, material and process. Such amount of data allows us to identify the main contributors and estimate the effect of them by means of Analysis of variance (ANOVA) combined with multivariate analysis. The analysis does not provide information about the root cause of the variation within the particular unit process, however, it provides a good estimate of the impact of the process on the stability of the manufacturing line. Additionally this analysis can be used to identify possible interaction between processes, which cannot be investigated if only single processes are considered. Goal of this work is to evaluate limits for CDO budgeting models given by the precision and the number of measurements as well as partitioning the variation within the manufacturing process. The CDO variation splits according to the suggested model into contributions from particular processes or process groups. Last but not least the power of this method to determine the absolute strength of each parameter will be demonstrated. Identification of the root cause of this variation within the unit process itself is not scope of this work.

Application of high-throughput mini-bioreactor system for systematic scale-down modeling, process characterization, and control strategy development.

PubMed

Janakiraman, Vijay; Kwiatkowski, Chris; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2015-01-01

High-throughput systems and processes have typically been targeted for process development and optimization in the bioprocessing industry. For process characterization, bench scale bioreactors have been the system of choice. Due to the need for performing different process conditions for multiple process parameters, the process characterization studies typically span several months and are considered time and resource intensive. In this study, we have shown the application of a high-throughput mini-bioreactor system viz. the Advanced Microscale Bioreactor (ambr15(TM) ), to perform process characterization in less than a month and develop an input control strategy. As a pre-requisite to process characterization, a scale-down model was first developed in the ambr system (15 mL) using statistical multivariate analysis techniques that showed comparability with both manufacturing scale (15,000 L) and bench scale (5 L). Volumetric sparge rates were matched between ambr and manufacturing scale, and the ambr process matched the pCO2 profiles as well as several other process and product quality parameters. The scale-down model was used to perform the process characterization DoE study and product quality results were generated. Upon comparison with DoE data from the bench scale bioreactors, similar effects of process parameters on process yield and product quality were identified between the two systems. We used the ambr data for setting action limits for the critical controlled parameters (CCPs), which were comparable to those from bench scale bioreactor data. In other words, the current work shows that the ambr15(TM) system is capable of replacing the bench scale bioreactor system for routine process development and process characterization. © 2015 American Institute of Chemical Engineers.

Consumers' conceptualization of ultra-processed foods.

PubMed

Ares, Gastón; Vidal, Leticia; Allegue, Gimena; Giménez, Ana; Bandeira, Elisa; Moratorio, Ximena; Molina, Verónika; Curutchet, María Rosa

2016-10-01

Consumption of ultra-processed foods has been associated with low diet quality, obesity and other non-communicable diseases. This situation makes it necessary to develop educational campaigns to discourage consumers from substituting meals based on unprocessed or minimally processed foods by ultra-processed foods. In this context, the aim of the present work was to investigate how consumers conceptualize the term ultra-processed foods and to evaluate if the foods they perceive as ultra-processed are in concordance with the products included in the NOVA classification system. An online study was carried out with 2381 participants. They were asked to explain what they understood by ultra-processed foods and to list foods that can be considered ultra-processed. Responses were analysed using inductive coding. The great majority of the participants was able to provide an explanation of what ultra-processed foods are, which was similar to the definition described in the literature. Most of the participants described ultra-processed foods as highly processed products that usually contain additives and other artificial ingredients, stressing that they have low nutritional quality and are unhealthful. The most relevant products for consumers' conceptualization of the term were in agreement with the NOVA classification system and included processed meats, soft drinks, snacks, burgers, powdered and packaged soups and noodles. However, some of the participants perceived processed foods, culinary ingredients and even some minimally processed foods as ultra-processed. This suggests that in order to accurately convey their message, educational campaigns aimed at discouraging consumers from consuming ultra-processed foods should include a clear definition of the term and describe some of their specific characteristics, such as the type of ingredients included in their formulation and their nutritional composition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rapid communication: Global-local processing affects recognition of distractor emotional faces.

PubMed

Srinivasan, Narayanan; Gupta, Rashmi

2011-03-01

Recent studies have shown links between happy faces and global, distributed attention as well as sad faces to local, focused attention. Emotions have been shown to affect global-local processing. Given that studies on emotion-cognition interactions have not explored the effect of perceptual processing at different spatial scales on processing stimuli with emotional content, the present study investigated the link between perceptual focus and emotional processing. The study investigated the effects of global-local processing on the recognition of distractor faces with emotional expressions. Participants performed a digit discrimination task with digits at either the global level or the local level presented against a distractor face (happy or sad) as background. The results showed that global processing associated with broad scope of attention facilitates recognition of happy faces, and local processing associated with narrow scope of attention facilitates recognition of sad faces. The novel results of the study provide conclusive evidence for emotion-cognition interactions by demonstrating the effect of perceptual processing on emotional faces. The results along with earlier complementary results on the effect of emotion on global-local processing support a reciprocal relationship between emotional processing and global-local processing. Distractor processing with emotional information also has implications for theories of selective attention.

Tomographical process monitoring of laser transmission welding with OCT

NASA Astrophysics Data System (ADS)

Ackermann, Philippe; Schmitt, Robert

2017-06-01

Process control of laser processes still encounters many obstacles. Although these processes are stable, a narrow process parameter window during the process or process deviations have led to an increase on the requirements for the process itself and on monitoring devices. Laser transmission welding as a contactless and locally limited joining technique is well-established in a variety of demanding production areas. For example, sensitive parts demand a particle-free joining technique which does not affect the inner components. Inline integrated non-destructive optical measurement systems capable of providing non-invasive tomographical images of the transparent material, the weld seam and its surrounding areas with micron resolution would improve the overall process. Obtained measurement data enable qualitative feedback into the system to adapt parameters for a more robust process. Within this paper we present the inline monitoring device based on Fourier-domain optical coherence tomography developed within the European-funded research project "Manunet Weldable". This device, after adaptation to the laser transmission welding process is optically and mechanically integrated into the existing laser system. The main target lies within the inline process control destined to extract tomographical geometrical measurement data from the weld seam forming process. Usage of this technology makes offline destructive testing of produced parts obsolete. 1,2,3,4

A quality-refinement process for medical imaging applications.

PubMed

Neuhaus, J; Maleike, D; Nolden, M; Kenngott, H-G; Meinzer, H-P; Wolf, I

2009-01-01

To introduce and evaluate a process for refinement of software quality that is suitable to research groups. In order to avoid constraining researchers too much, the quality improvement process has to be designed carefully. The scope of this paper is to present and evaluate a process to advance quality aspects of existing research prototypes in order to make them ready for initial clinical studies. The proposed process is tailored for research environments and therefore more lightweight than traditional quality management processes. Focus on quality criteria that are important at the given stage of the software life cycle. Usage of tools that automate aspects of the process is emphasized. To evaluate the additional effort that comes along with the process, it was exemplarily applied for eight prototypical software modules for medical image processing. The introduced process has been applied to improve the quality of all prototypes so that they could be successfully used in clinical studies. The quality refinement yielded an average of 13 person days of additional effort per project. Overall, 107 bugs were found and resolved by applying the process. Careful selection of quality criteria and the usage of automated process tools lead to a lightweight quality refinement process suitable for scientific research groups that can be applied to ensure a successful transfer of technical software prototypes into clinical research workflows.

Negative Binomial Process Count and Mixture Modeling.

PubMed

Zhou, Mingyuan; Carin, Lawrence

2015-02-01

The seemingly disjoint problems of count and mixture modeling are united under the negative binomial (NB) process. A gamma process is employed to model the rate measure of a Poisson process, whose normalization provides a random probability measure for mixture modeling and whose marginalization leads to an NB process for count modeling. A draw from the NB process consists of a Poisson distributed finite number of distinct atoms, each of which is associated with a logarithmic distributed number of data samples. We reveal relationships between various count- and mixture-modeling distributions and construct a Poisson-logarithmic bivariate distribution that connects the NB and Chinese restaurant table distributions. Fundamental properties of the models are developed, and we derive efficient Bayesian inference. It is shown that with augmentation and normalization, the NB process and gamma-NB process can be reduced to the Dirichlet process and hierarchical Dirichlet process, respectively. These relationships highlight theoretical, structural, and computational advantages of the NB process. A variety of NB processes, including the beta-geometric, beta-NB, marked-beta-NB, marked-gamma-NB and zero-inflated-NB processes, with distinct sharing mechanisms, are also constructed. These models are applied to topic modeling, with connections made to existing algorithms under Poisson factor analysis. Example results show the importance of inferring both the NB dispersion and probability parameters.

[Process management in the hospital pharmacy for the improvement of the patient safety].

PubMed

Govindarajan, R; Perelló-Juncá, A; Parès-Marimòn, R M; Serrais-Benavente, J; Ferrandez-Martí, D; Sala-Robinat, R; Camacho-Calvente, A; Campabanal-Prats, C; Solà-Anderiu, I; Sanchez-Caparrós, S; Gonzalez-Estrada, J; Martinez-Olalla, P; Colomer-Palomo, J; Perez-Mañosas, R; Rodríguez-Gallego, D

2013-01-01

To define a process management model for a hospital pharmacy in order to measure, analyse and make continuous improvements in patient safety and healthcare quality. In order to implement process management, Igualada Hospital was divided into different processes, one of which was the Hospital Pharmacy. A multidisciplinary management team was given responsibility for each process. For each sub-process one person was identified to be responsible, and a working group was formed under his/her leadership. With the help of each working group, a risk analysis using failure modes and effects analysis (FMEA) was performed, and the corresponding improvement actions were implemented. Sub-process indicators were also identified, and different process management mechanisms were introduced. The first risk analysis with FMEA produced more than thirty preventive actions to improve patient safety. Later, the weekly analysis of errors, as well as the monthly analysis of key process indicators, permitted us to monitor process results and, as each sub-process manager participated in these meetings, also to assume accountability and responsibility, thus consolidating the culture of excellence. The introduction of different process management mechanisms, with the participation of people responsible for each sub-process, introduces a participative management tool for the continuous improvement of patient safety and healthcare quality. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Distributed processing method for arbitrary view generation in camera sensor network

NASA Astrophysics Data System (ADS)

Tehrani, Mehrdad P.; Fujii, Toshiaki; Tanimoto, Masayuki

2003-05-01

Camera sensor network as a new advent of technology is a network that each sensor node can capture video signals, process and communicate them with other nodes. The processing task in this network is to generate arbitrary view, which can be requested from central node or user. To avoid unnecessary communication between nodes in camera sensor network and speed up the processing time, we have distributed the processing tasks between nodes. In this method, each sensor node processes part of interpolation algorithm to generate the interpolated image with local communication between nodes. The processing task in camera sensor network is ray-space interpolation, which is an object independent method and based on MSE minimization by using adaptive filtering. Two methods were proposed for distributing processing tasks, which are Fully Image Shared Decentralized Processing (FIS-DP), and Partially Image Shared Decentralized Processing (PIS-DP), to share image data locally. Comparison of the proposed methods with Centralized Processing (CP) method shows that PIS-DP has the highest processing speed after FIS-DP, and CP has the lowest processing speed. Communication rate of CP and PIS-DP is almost same and better than FIS-DP. So, PIS-DP is recommended because of its better performance than CP and FIS-DP.

EEG alpha synchronization is related to top-down processing in convergent and divergent thinking

PubMed Central

Benedek, Mathias; Bergner, Sabine; Könen, Tanja; Fink, Andreas; Neubauer, Aljoscha C.

2011-01-01

Synchronization of EEG alpha activity has been referred to as being indicative of cortical idling, but according to more recent evidence it has also been associated with active internal processing and creative thinking. The main objective of this study was to investigate to what extent EEG alpha synchronization is related to internal processing demands and to specific cognitive process involved in creative thinking. To this end, EEG was measured during a convergent and a divergent thinking task (i.e., creativity-related task) which once were processed involving low and once involving high internal processing demands. High internal processing demands were established by masking the stimulus (after encoding) and thus preventing further bottom-up processing. Frontal alpha synchronization was observed during convergent and divergent thinking only under exclusive top-down control (high internal processing demands), but not when bottom-up processing was allowed (low internal processing demands). We conclude that frontal alpha synchronization is related to top-down control rather than to specific creativity-related cognitive processes. Frontal alpha synchronization, which has been observed in a variety of different creativity tasks, thus may not reflect a brain state that is specific for creative cognition but can probably be attributed to high internal processing demands which are typically involved in creative thinking. PMID:21925520

Kennedy Space Center Payload Processing

NASA Technical Reports Server (NTRS)

Lawson, Ronnie; Engler, Tom; Colloredo, Scott; Zide, Alan

2011-01-01

This slide presentation reviews the payload processing functions at Kennedy Space Center. It details some of the payloads processed at KSC, the typical processing tasks, the facilities available for processing payloads, and the capabilities and customer services that are available.

Improving the Document Development Process: Integrating Relational Data and Statistical Process Control.

ERIC Educational Resources Information Center

Miller, John

1994-01-01

Presents an approach to document numbering, document titling, and process measurement which, when used with fundamental techniques of statistical process control, reveals meaningful process-element variation as well as nominal productivity models. (SR)

USE OF INDICATOR ORGANISMS FOR DETERMINING PROCESS EFFECTIVENESS

EPA Science Inventory

Wastewaters, process effluents and treatment process residuals contain a variety of microorganisms. Many factors influence their densities as they move through collection systems and process equipment. Biological treatment systems rely on the catabolic processes of such microor...

Food processing by high hydrostatic pressure.

PubMed

Yamamoto, Kazutaka

2017-04-01

High hydrostatic pressure (HHP) process, as a nonthermal process, can be used to inactivate microbes while minimizing chemical reactions in food. In this regard, a HHP level of 100 MPa (986.9 atm/1019.7 kgf/cm 2 ) and more is applied to food. Conventional thermal process damages food components relating color, flavor, and nutrition via enhanced chemical reactions. However, HHP process minimizes the damages and inactivates microbes toward processing high quality safe foods. The first commercial HHP-processed foods were launched in 1990 as fruit products such as jams, and then some other products have been commercialized: retort rice products (enhanced water impregnation), cooked hams and sausages (shelf life extension), soy sauce with minimized salt (short-time fermentation owing to enhanced enzymatic reactions), and beverages (shelf life extension). The characteristics of HHP food processing are reviewed from viewpoints of nonthermal process, history, research and development, physical and biochemical changes, and processing equipment.

[Near infrared spectroscopy based process trajectory technology and its application in monitoring and controlling of traditional Chinese medicine manufacturing process].

PubMed

Li, Wen-Long; Qu, Hai-Bin

2016-10-01

In this paper, the principle of NIRS (near infrared spectroscopy)-based process trajectory technology was introduced.The main steps of the technique include:① in-line collection of the processes spectra of different technics; ② unfolding of the 3-D process spectra;③ determination of the process trajectories and their normal limits;④ monitoring of the new batches with the established MSPC (multivariate statistical process control) models.Applications of the technology in the chemical and biological medicines were reviewed briefly. By a comprehensive introduction of our feasibility research on the monitoring of traditional Chinese medicine technical process using NIRS-based multivariate process trajectories, several important problems of the practical applications which need urgent solutions are proposed, and also the application prospect of the NIRS-based process trajectory technology is fully discussed and put forward in the end. Copyright© by the Chinese Pharmaceutical Association.

Recollection is a continuous process: implications for dual-process theories of recognition memory.

PubMed

Mickes, Laura; Wais, Peter E; Wixted, John T

2009-04-01

Dual-process theory, which holds that recognition decisions can be based on recollection or familiarity, has long seemed incompatible with signal detection theory, which holds that recognition decisions are based on a singular, continuous memory-strength variable. Formal dual-process models typically regard familiarity as a continuous process (i.e., familiarity comes in degrees), but they construe recollection as a categorical process (i.e., recollection either occurs or does not occur). A continuous process is characterized by a graded relationship between confidence and accuracy, whereas a categorical process is characterized by a binary relationship such that high confidence is associated with high accuracy but all lower degrees of confidence are associated with chance accuracy. Using a source-memory procedure, we found that the relationship between confidence and source-recollection accuracy was graded. Because recollection, like familiarity, is a continuous process, dual-process theory is more compatible with signal detection theory than previously thought.

A qualitative assessment of a random process proposed as an atmospheric turbulence model

NASA Technical Reports Server (NTRS)

Sidwell, K.

1977-01-01

A random process is formed by the product of two Gaussian processes and the sum of that product with a third Gaussian process. The resulting total random process is interpreted as the sum of an amplitude modulated process and a slowly varying, random mean value. The properties of the process are examined, including an interpretation of the process in terms of the physical structure of atmospheric motions. The inclusion of the mean value variation gives an improved representation of the properties of atmospheric motions, since the resulting process can account for the differences in the statistical properties of atmospheric velocity components and their gradients. The application of the process to atmospheric turbulence problems, including the response of aircraft dynamic systems, is examined. The effects of the mean value variation upon aircraft loads are small in most cases, but can be important in the measurement and interpretation of atmospheric turbulence data.

Metals Recovery from Artificial Ore in Case of Printed Circuit Boards, Using Plasmatron Plasma Reactor

PubMed Central

Szałatkiewicz, Jakub

2016-01-01

This paper presents the investigation of metals production form artificial ore, which consists of printed circuit board (PCB) waste, processed in plasmatron plasma reactor. A test setup was designed and built that enabled research of plasma processing of PCB waste of more than 700 kg/day scale. The designed plasma process is presented and discussed. The process in tests consumed 2 kWh/kg of processed waste. Investigation of the process products is presented with their elemental analyses of metals and slag. The average recovery of metals in presented experiments is 76%. Metals recovered include: Ag, Au, Pd, Cu, Sn, Pb, and others. The chosen process parameters are presented: energy consumption, throughput, process temperatures, and air consumption. Presented technology allows processing of variable and hard-to-process printed circuit board waste that can reach up to 100% of the input mass. PMID:28773804

Characterisation and Processing of Some Iron Ores of India

NASA Astrophysics Data System (ADS)

Krishna, S. J. G.; Patil, M. R.; Rudrappa, C.; Kumar, S. P.; Ravi, B. P.

2013-10-01

Lack of process characterization data of the ores based on the granulometry, texture, mineralogy, physical, chemical, properties, merits and limitations of process, market and local conditions may mislead the mineral processing entrepreneur. The proper implementation of process characterization and geotechnical map data will result in optimized sustainable utilization of resource by processing. A few case studies of process characterization of some Indian iron ores are dealt with. The tentative ascending order of process refractoriness of iron ores is massive hematite/magnetite < marine black iron oxide sands < laminated soft friable siliceous ore fines < massive banded magnetite quartzite < laminated soft friable clayey aluminous ore fines < massive banded hematite quartzite/jasper < massive clayey hydrated iron oxide ore < manganese bearing iron ores massive < Ti-V bearing magnetite magmatic ore < ferruginous cherty quartzite. Based on diagnostic process characterization, the ores have been classified and generic process have been adopted for some Indian iron ores.

Measuring health care process quality with software quality measures.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2012-01-01

Existing quality models focus on some specific diseases, clinics or clinical areas. Although they contain structure, process, or output type measures, there is no model which measures quality of health care processes comprehensively. In addition, due to the not measured overall process quality, hospitals cannot compare quality of processes internally and externally. To bring a solution to above problems, a new model is developed from software quality measures. We have adopted the ISO/IEC 9126 software quality standard for health care processes. Then, JCIAS (Joint Commission International Accreditation Standards for Hospitals) measurable elements were added to model scope for unifying functional requirements. Assessment (diagnosing) process measurement results are provided in this paper. After the application, it was concluded that the model determines weak and strong aspects of the processes, gives a more detailed picture for the process quality, and provides quantifiable information to hospitals to compare their processes with multiple organizations.

Thermal Stir Welding: A New Solid State Welding Process

NASA Technical Reports Server (NTRS)

Ding, R. Jeffrey

2003-01-01

Thermal stir welding is a new welding process developed at NASA's Marshall Space Flight Center in Huntsville, AL. Thermal stir welding is similar to friction stir welding in that it joins similar or dissimilar materials without melting the parent material. However, unlike friction stir welding, the heating, stirring and forging elements of the process are all independent of each other and are separately controlled. Furthermore, the heating element of the process can be either a solid-state process (such as a thermal blanket, induction type process, etc), or, a fusion process (YG laser, plasma torch, etc.) The separation of the heating, stirring, forging elements of the process allows more degrees of freedom for greater process control. This paper introduces the mechanics of the thermal stir welding process. In addition, weld mechanical property data is presented for selected alloys as well as metallurgical analysis.

Thermal Stir Welding: A New Solid State Welding Process

NASA Technical Reports Server (NTRS)

Ding, R. Jeffrey; Munafo, Paul M. (Technical Monitor)

2002-01-01

Thermal stir welding is a new welding process developed at NASA's Marshall Space Flight Center in Huntsville, AL. Thermal stir welding is similar to friction stir welding in that it joins similar or dissimilar materials without melting the parent material. However, unlike friction stir welding, the heating, stirring and forging elements of the process are all independent of each other and are separately controlled. Furthermore, the heating element of the process can be either a solid-state process (such as a thermal blanket, induction type process, etc), or, a fusion process (YG laser, plasma torch, etc.) The separation of the heating, stirring, forging elements of the process allows more degrees of freedom for greater process control. This paper introduces the mechanics of the thermal stir welding process. In addition, weld mechanical property data is presented for selected alloys as well as metallurgical analysis.

Metals Recovery from Artificial Ore in Case of Printed Circuit Boards, Using Plasmatron Plasma Reactor.

PubMed

Szałatkiewicz, Jakub

2016-08-10

This paper presents the investigation of metals production form artificial ore, which consists of printed circuit board (PCB) waste, processed in plasmatron plasma reactor. A test setup was designed and built that enabled research of plasma processing of PCB waste of more than 700 kg/day scale. The designed plasma process is presented and discussed. The process in tests consumed 2 kWh/kg of processed waste. Investigation of the process products is presented with their elemental analyses of metals and slag. The average recovery of metals in presented experiments is 76%. Metals recovered include: Ag, Au, Pd, Cu, Sn, Pb, and others. The chosen process parameters are presented: energy consumption, throughput, process temperatures, and air consumption. Presented technology allows processing of variable and hard-to-process printed circuit board waste that can reach up to 100% of the input mass.

The origins of levels-of-processing effects in a conceptual test: evidence for automatic influences of memory from the process-dissociation procedure.

PubMed

Bergerbest, Dafna; Goshen-Gottstein, Yonatan

2002-12-01

In three experiments, we explored automatic influences of memory in a conceptual memory task, as affected by a levels-of-processing (LoP) manipulation. We also explored the origins of the LoP effect by examining whether the effect emerged only when participants in the shallow condition truncated the perceptual processing (the lexical-processing hypothesis) or even when the entire word was encoded in this condition (the conceptual-processing hypothesis). Using the process-dissociation procedure and an implicit association-generation task, we found that the deep encoding condition yielded higher estimates of automatic influences than the shallow condition. In support of the conceptual processing hypothesis, the LoP effect was found even when the shallow task did not lead to truncated processing of the lexical units. We suggest that encoding for meaning is a prerequisite for automatic processing on conceptual tests of memory.

Impact of dental orientation given to mothers during pregnancy on oral health of their children.

PubMed

Rigo, Lilian; Dalazen, Jaqueline; Garbin, Raíssa Rigo

2016-01-01

To analyze the perception of mothers about oral health of their children, as well as to check the influence of demographic variables, perception and preventive practice in oral health of mothers regarding guidance received during pregnancy. Quantitative and cross-sectional field study, with a non-probability sample formed by all mothers who attended the primary healthcare unit of Ijuí (RS), Brazil, from January to July 2014, comprising a sample of 79 women. Self-applied questionnaires were given to these mothers. Data analysis was carried out using descriptive and inferential statistics, the χ2 test at a significance level of 5%. The mothers who received dental orientation during pregnancy had greater perception of oral health of their children. The mean age of mothers was 26 years, most of them attended high school education (32.9%) and worked outside the home (60.8%). There was a statistically significant relation between the outcome variable, dental orientation during pregnancy, and the independent variables: schooling level of mothers, occupation, baby's first visit to the dentist, duration of breastfeeding, beginning of baby's tooth brushing and knowledge about dental decay (p<0.005). Mothers with higher schooling levels and who worked outside the home had more knowledge about oral care, because they received dental orientation during pregnancy. The dental guidance during pregnancy influences the mother in the procedures adopted with their children, as to early oral hygiene, first dentist appointment, duration of breastfeeding, knowledge about the factors that lead to dental decay. Analisar a percepção das mães em relação à saúde bucal de seus filhos, bem como verificar a influência das variáveis demográficas, de percepção e prática preventiva em saúde bucal das mães, na orientação odontológica recebida durante a gestação. Pesquisa de campo com abordagem quantitativa e delineamento transversal. A amostragem foi não probabilística com todas as mães que frequentaram o posto de saúde do município de Ijuí (RS), de janeiro a julho de 2014, compondo uma amostra de 79 mulheres. Foram distribuídos questionários autoaplicativos às mães participantes da pesquisa. A análise dos dados foi feita através de estatística descritiva e inferencial, pelo teste do χ2 com nível de significância de 5%. Mães que receberam orientação odontológica durante a gestação tiveram maior percepção sobre a saúde bucal de seus filhos. A média de idade das mães foi 26 anos, e a maioria delas frequentou o ensino médio completo (32,9%) e trabalhava fora de casa (60,8%). Houve uma relação estatisticamente significativa entre a variável desfecho, orientação odontológica durante a gestação e as variáveis independentes: escolaridade das mães, ocupação, primeira visita do bebê ao dentista, tempo de amamentação natural, início da escovação do bebê e conhecimento sobre a cárie dentária (p<0,005). As mães com maior nível de escolaridade e que trabalhavam fora de casa tinham mais conhecimento sobre atenção odontológica, pois receberam orientação odontológica na gestação. A orientação odontológica recebida na gestação influencia as mães nos procedimentos adotados com seus filhos, em relação ao início da higienização bucal, primeira consulta ao dentista, tempo de amamentação, o conhecimento sobre os fatores que levam ao aparecimento da cárie dentária.

Different Cultures in Astronomy Education and Their Meanings in the Classroom. (Spanish Title: Las Diferentes Culturas en la Educación en Astronomía y Sus Significados EN EL Aula. ) As Diferentes Culturas na Educação em Astronomia E Seus Significados em Sala de Aula

NASA Astrophysics Data System (ADS)

Pereira de Barros, Vicente; Bovolenta Ovigli, Daniel Fernando

2014-12-01

This paper is a reflection about the use of History of Science in the curriculum of formal education, through the discussion concerning cultural elements of several ethnic groups in Brazil, in actions related to astronomy education. The work was developed in the framework of an extension course and the analysis undertaken here refers to a meeting that discussed didactic sequences relating to that theme, based on the Brazilian law 11.645/2008, which states the obligation to present the subject "African-brazilian and indigenous History and Culture" in the official curriculum. The extension action was developed with teachers who teach Natural Sciences, in São Paulo state, discussing issues related to the use of History of Science and the relationship with cosmogonies from Iorubá and Tupi peoples, highlighting how they can enhance the work with Astronomy(ies) in the classroom. It was observed that the participants had not yet presented these themes in their classes and also did not participate in training courses that discussed these subjects. Este artículo presenta una reflexión sobre el uso de la historia de la ciencia en el currículo de la educación formal, a través de la discusión sobre el uso de los elementos culturales de los grupos étnicos en Brasil, en acciones relacionadas con la educación en astronomía. El trabajo se desarrolló en el marco de un curso de extensión y el análisis realizado aquí se refiere a un encuentro en el cual se abordaron secuencias didácticas relacionadas con ese tema, sobre la base de la ley brasilera 11.645/2008 que dispone la obligatoriedad del tema "Historia y Cultura africana e indígena en el Brasil" en el currículo oficial. La acción de extensión se desarrolló con los profesores de ciencias naturales en el interior del estado de São Paulo, discutiendo temas relacionados con el uso de la historia de la ciencia y la relación con las cosmogonías de los pueblos Iorubá y Tupi, que muestra cómo se puede mejorar el trabajo con Astronomía(s) en la clase. Se observó que los participantes todavía no habían presentado estos temas en sus clases y tampoco habían participado en cursos de formación que abordaran estos temas. O presente trabalho apresenta uma reflexão acerca da utilização da História da Ciência no currículo da educação formal, por meio da discussão relativa ao emprego de elementos culturais de grupos étnicos em ações voltadas à educação em Astronomia. O trabalho foi desenvolvido no âmbito de um curso de extensão e a análise aqui empreendida refere-se a um encontro que abordou sequências didáticas relativas àquele tema, com fundamento na lei 11.645/2008 e a obrigatoriedade de abordagem da temática "História e Cultura Afro-Brasileira e Indígena" no currículo oficial. A ação de extensão ocorreu junto a professores que ensinam Ciências da Natureza, no interior do estado de São Paulo, discutindo-se temas relativos ao uso de História da Ciência e o relacionamento com cosmogonias oriundas dos povos Iorubá e Tupi, evidenciando como podem enriquecer o trabalho com a(s) Astronomia(s) em sala de aula. Observou-se que os participantes ainda não haviam apresentado estes temas em suas aulas e, igualmente, não participaram de cursos de formação que contemplassem a referida temática.

Astrophysics in Schools: Playing with Observational Data. (Spanish Title: Astrofísica Escolar: Jugando con Datos Observacionales.) Astrofísica Escolar: Brincando com Dados Observacionais

NASA Astrophysics Data System (ADS)

Navone, Hugo D.; Scancich, Miriam; Vázquez, Rubén A.

2011-07-01

The use of observational records in the design of teaching sequences in Astrophysics in High Schools is quite uncommon. It is also uncommon the thematic approach within the context provided by Nature of Science. Besides these shortcomings, we should also consider the lack of proposals to use the computer as a laboratory from which nature is studied. These aspects expose the existence of a disconnection between school science and scientist's science, establishing the need for simple educational projects that promote interdisciplinary dialogue between the two fields of knowledge. Based on these assumptions, this paper presents the school reformulation of the redshift-distance problem as addressed by Hubble in his diagram, and explores the main educational dimensions emerging from it. The proposal is directed not only for senior students of high school and/or early 1st year students at University level, but also for students and teachers from teacher training colleges. Practical evidence shows that this proposal is viable, mobilizes interests about issues of Astrophysics and promotes a ludic and cooperative character among students. La utilización de registros observacionales en el diseño de secuencias didácticas en Astrofísica Escolar no es algo usual en el ámbito de la escuela media. Tampoco lo es el abordaje de temáticas desde el contexto que provee Naturaleza de la Ciencia. A estas carencias se le suma la falta de propuestas que hagan intervenir a la computadora como un laboratorio desde el cual se interpela a la naturaleza. Los aspectos mencionados exponen la existencia de un desajuste entre ciencia escolar y ciencia experta estableciendo la necesidad de elaborar proyectos educativos sencillos que promuevan el diálogo interdisciplinar entre ambos campos del conocimiento. Partiendo de estos presupuestos, en este trabajo se presenta la reformulación escolar del problema abordado por Hubble -que diera lugar al diagrama que lleva su nombre- y se exploran las principales dimensiones educativas que emergen del mismo. La propuesta está destinada a alumnos del último año de nivel medio y primeros años de la universidad, y a estudiantes y profesores de Institutos de Formación Docente. Las puestas en práctica realizadas muestran que la propuesta es viable, que moviliza inquietudes en torno a temáticas de Astrofísica y que se fortalece al adquirir un carácter lúdico y cooperativo. A utilização de registros observacionais na construção de seqüências didáticas em Astrofísica Escolar não é algo usual no ensino médio. Tampouco o é uma abordagem de temáticas dentro do contexto da Natureza da Ciência. Agrega-se a estas carências a falta de propostas que estimulem a utilização do computador como um laboratório para estudar a natureza. Os aspectos mencionados expõem a existência de um desajuste entre ciência escolar e ciência avançada, estabelecendo a necessidade de elaborar projetos educativos simples que promovam o diálogo interdisciplinar entre ambos campos do conhecimento. Partindo destes pressupostos, este trabalho apresenta a reformulação escolar do problema abordado por Hubble -a relação entre redshift e distância das galáxias- e se exploram as principais dimensões educativas que emergem do mesmo. A proposta está destinada a alunos do último ano do nível médio, primeiros anos do curso superior e a estudantes e professores de Institutos de Formação Docente. As atividades práticas realizadas mostram que a proposta é viável, que mobiliza inquietudes em torno da temática e da Astrofísica e que se fortalece ao adquirir um caráter lúdico e cooperativo.

Contribution of Oswaldo Paulo Forattini to public health: analysis of scientific production.

PubMed

Reis, Juliana Gonçalves; Kobayashi, Keilla Miki; Ueno, Helene Mariko; Ribeiro, Cristiane Martins; Cardoso, Telma Abdalla de Oliveira

2016-12-22

To analyze the main characteristics of the scientific production of Oswaldo Paulo Forattini, researcher and, for 40 years, editor of Revista de Saúde Pública. Descriptive study with bibliometric approach conducted in three steps. (1) identification of bibliographic records using the following search strategy: "Oswaldo Paulo Forattini" OR "Forattini OP" OR "Forattini" up information sources Google Scholar, Web of Science, and PubMed, in July 2016, which retrieved 867 records. (2) composition of research corpus, in which we included 351 bibliographic records of articles, books, book chapters, editorials, book reviews, informative notes and annual reports of the RSP and excluded 516 duplicates and acknowledgement notes, obituary notes, and nonretrievable citations. (3) data organization and analysis, in which we built databases for descriptive analysis and development of the MeSH coauthors and terms networks in VOSviewer software. For analysis of editorials, three reviewers read the full text of each editorial and categorized them according to subject, historical context and perspectives, relating them with historical milestones. Forattini's scientific production occurred from 1946 to 2009, most consisting of articles (n = 218; 62.1%), editorials (n = 43; 12.3%), and books (n = 13; 3.7%). The main subjects were Culicidae (36.8%), Triatominae (12.5%), and Epidemiology (10.0%). The coauthors of articles were his professors, colleagues of his generation, and graduate students. His editorials addressed critical reflections on the production of knowledge, research priorities, and factors that contributed to or hindered progress. The scope of subjects is broad, referring to socioeconomic and scientific development, public health issues in developed countries, or global health. The analysis shows Forattini's commitment with public health, research with vectors, training of researchers, and scientific communication. Analisar as principais características da produção científica de Oswaldo Paulo Forattini, pesquisador e, por 40 anos, editor da Revista de Saúde Pública. Estudo descritivo com abordagem bibliométrica realizado em três etapas. (1) Identificação dos registros bibliográficos, utilizando a seguinte estratégia de busca: "Oswaldo Paulo Forattini" OR "Forattini OP" OR "Forattini O" nas fontes de informação Google Scholar, Web of Science e PubMed, em julho de 2016, o que recuperou 867 registros. (2) Composição do corpus da pesquisa, na qual foram incluídos 351 registros bibliográficos de artigos, livros, capítulos de livros, editoriais, resenhas de livros, notas informativas e relatórios anuais da RSP e excluídos 516 duplicatas e notas de agradecimento, notas de obituários e citações não recuperáveis. (3) Organização e análise dos dados, na qual foram construídos bancos de dados para análise descritiva e elaboração das redes de coautores e de termos do MeSH no software VOSviewer. Para análise dos editoriais, três revisores leram o texto completo de cada editorial e os categorizaram segundo assunto, contexto histórico e perspectivas, relacionando-o com marcos históricos. A produção científica de Forattini ocorreu de 1946 a 2009, a maioria composta por artigos (n = 218; 62,1%), editoriais (n = 43; 12,3%) e livros (n = 13; 3,7%). Os principais assuntos foram Culicidae (36,8%), Triatominae (12,5%) e Epidemiologia (10,0%). Os coautores dos artigos foram seus mestres, colegas de sua geração e alunos de pós-graduação. Seus editoriais abordaram reflexões críticas sobre a produção de conhecimento, prioridades em pesquisa e fatores que contribuíam ou desfavoreciam o progresso. O escopo dos assuntos é amplo, remetendo ao desenvolvimento científico e socioeconômico, questões de saúde pública em países desenvolvidos ou saúde global. A análise mostra o comprometimento de Forattini com a saúde pública, na pesquisa com vetores, na formação de pesquisadores e na comunicação científica.

FROM COMPLEX EVOLVING TO SIMPLE: CURRENT REVISIONAL AND ENDOSCOPIC PROCEDURES FOLLOWING BARIATRIC SURGERY.

PubMed

Zorron, Ricardo; Galvão-Neto, Manoel Passos; Campos, Josemberg; Branco, Alcides José; Sampaio, José; Junghans, Tido; Bothe, Claudia; Benzing, Christian; Krenzien, Felix

Roux-en-Y gastric bypass (RYGB) is a standard therapy in bariatric surgery. Sleeve gastrectomy and gastric banding, although with good results in the literature, are showing higher rates of treatment failure to reduce obesity-associated morbidity and body weight. Other problems after bariatric may occur, as band erosion, gastroesophageal reflux disease and might be refractory to medication. Therefore, a laparoscopic conversion to a RYGB can be an effective alternative, as long as specific indications for revision are fulfilled. The objective of this study was to analyse own and literature data on revisional bariatric procedures to evaluate best alternatives to current practice. Institutional experience and systematic review from the literature on revisional bariatric surgery. Endoscopic procedures are recently applied to ameliorate failure and complications of bariatric procedures. Therapy failure following RYGB occurs in up to 20%. Transoral outlet reduction is currently an alternative method to reduce the gastrojejunal anastomosis. The diameter and volume of sleeve gastrectomy can enlarge as well, which can be reduced by endoscopic full-thickness sutures longitudinally. Dumping syndrome and severe hypoglycemic episodes (neuroglycopenia) can be present in patients following RYGB. The hypoglycemic episodes have to be evaluated and usually can be treated conventionally. To avoid partial pancreatectomy or conversion to normal anatomy, a new laparoscopic approach with remnant gastric resection and jejunal interposition can be applied in non-responders alternatively. Hypoglycemic episodes are ameliorated while weight loss is sustained. Revisional and endoscopic procedures following bariatric surgery in patients with collateral symptomatic or treatment failure can be applied. Conventional non-surgical approaches should have been applied intensively before a revisional surgery will be indicated. Former complex surgical revisional procedures are evolving to less complicated endoscopic solutions. Bypass gástrico em Y-de-Roux (BGYR) é procedimento padrão em cirurgia bariátrica. Gastrectomia vertical e banda gástrica, embora com bons resultados na literatura, estão mostrando taxas mais elevadas de insucesso no tratamento para reduzir a morbidade associada à obesidade e peso corporal. Outros problemas pós-operatórios podem ocorrer, como a erosão da banda, e doença do refluxo gastroesofágico refratária à medicação. Portanto, conversão laparoscópica para BGYR pode ser alternativa eficaz, desde que indicações específicas para a revisão sejam cumpridas. Analisar os nossos dados e os da literatura sobre procedimentos bariátricos revisionais para avaliar melhores alternativas para a prática atual. Foram efetuados experiência institucional e revisão sistemática da literatura sobre cirurgia bariátrica revisional. Procedimentos endoscópicos estão sendo aplicados recentemente para melhorar a falha e complicações de procedimentos bariátricos. Falha terapêutica após BGYR ocorre em até 20%. A redução transoral é atualmente um método alternativo para reduzir a anastomose gastrojejunal. A gastrectomia vertical pode apresentar aumento de volume e do diâmetro do pouch , o qual podem ser reduzidos por meio de sutura total endoscópica longitudinal. Síndrome de dumping e episódios de hipoglicemia grave (neuroglicopenia) podem estar presentes nos pacientes com BGYR. Os episódios hipoglicêmicos devem ser avaliados e geralmente podem ser tratados convencionalmente. Para evitar pancreatectomia parcial ou conversão à anatomia normal, uma nova abordagem laparoscópica com ressecção do remanescente gástrico e interposição de jejuno, pode ser aplicada como alternativa em não-respondedores. Episódios de hipoglicemia melhoram, enquanto a perda de peso é mantida. Procedimentos revisionais endoscópicos podem ser aplicados após cirurgia bariátrica em pacientes com sintomas colaterais ou na falha do tratamento. Abordagens convencionais não-cirúrgicas devem ser aplicadas intensivamente antes que uma operação revisional seja indicada. Antigos procedimentos cirúrgicos revisionais complexos estão evoluindo para soluções endoscópicas menos complicadas.

Good practices in collecting umbilical cord and placental blood.

PubMed

Lopes, Lauren Auer; Bernardino, Elizabeth; Crozeta, Karla; Guimarães, Paulo Ricardo Bittencourt

2016-08-18

to identify the factors related to the quality of umbilical cord and placental blood specimens, and define best practices for their collection in a government bank of umbilical cord and placental blood. this was a descriptive study, quantitative approach, performed at a government umbilical cord and placental blood bank, in two steps: 1) verification of the obstetric, neonatal and operational factors, using a specific tool for gathering data as non-participant observers; 2) definition of best practices by grouping non-conformities observed before, during and after blood collection. The data was analyzed using descriptive statistics and the following statistical software: Statistica(r) and R(r). while there was a correlation with obstetrical and neonatal factors, there was a larger correlation with operational factors, resulting in the need to adjust the professional practices of the nursing staff and obstetrical team involved in collecting this type of blood. Based on these non-conformities we defined best practices for nurses before, during and after blood collection. the best practices defined in this study are an important management tool for the work of nurses in obtaining blood specimens of high cell quality. identificar fatores relacionados à qualidade das amostras do sangue de cordão umbilical e placentário e definir boas práticas para sua coleta em um banco público de sangue de cordão umbilical e placentário. pesquisa descritiva, abordagem quantitativa, realizada em um banco público de sangue de cordão umbilical e placentário, desenvolvida em duas etapas: 1) verificação dos fatores obstétricos, neonatais e operacionais, obtidos por coleta em instrumento próprio e observação não participante; 2) definição das boas práticas, por meio do agrupamento de não-conformidades observadas antes, durante e após a coleta do sangue. Os dados foram analisados por meio da estatística descritiva, utilizando-se dos softwares Statistica(r) e R(r). houve correlação da influência dos fatores obstétricos e neonatais em menor escala quando comparados aos fatores operacionais, resultando na necessidade de readequar a prática profissional do enfermeiro e da equipe obstétrica envolvida no processo da coleta desse tipo de sangue. A partir das não-conformidades foram definidas boas práticas para o enfermeiro antes, durante e após a coleta. as boas práticas definidas neste estudo são importante ferramenta gerencial para o trabalho do enfermeiro na obtenção de amostras de sangue com alta qualidade celular. identificar factores relacionados a la calidad de las muestras de la sangre del cordón umbilical y de la placenta y definir buenas prácticas para su recolección en un banco público de sangre del cordón umbilical y de la placenta. investigación - descriptiva, abordaje cuantitativo, realizada en un banco público de sangre - del cordón umbilical y de la placenta, desarrollada en dos etapas: 1) verificación de los factores obstétricos, neonatales y operacionales, obtenidos por recolección con instrumento propio y observación no participante; 2) definición de las buenas prácticas, por medio del agrupamiento de no-conformidades observadas antes, durante y después de la recolección de la sangre. Los datos fueron analizados por medio de la estadística descriptiva, utilizando los softwares Statistica(r) y R(r). hubo correlación de la influencia de los factores obstétricos y neonatales en menor escala cuando comparados a los factores operacionales, resultando en la necesidad de readecuar la práctica profesional del enfermero y del equipo obstétrico que participa en el proceso de la recolección de ese tipo de sangre. A partir de las no-conformidades fueron definidas buenas prácticas para el enfermero antes, durante y después de la recolección. las buenas prácticas definidas en este estudio son importante herramienta administrativa para el trabajo del enfermero en la obtención de muestras de sangre con alta calidad celular.

Management changes resulting from hospital accreditation.

PubMed

Oliveira, João Lucas Campos de; Gabriel, Carmen Silvia; Fertonani, Hosanna Pattrig; Matsuda, Laura Misue

2017-03-02

to analyze managers and professionals' perceptions on the changes in hospital management deriving from accreditation. descriptive study with qualitative approach. The participants were five hospital quality managers and 91 other professionals from a wide range of professional categories, hierarchical levels and activity areas at four hospitals in the South of Brazil certified at different levels in the Brazilian accreditation system. They answered the question "Tell me about the management of this hospital before and after the Accreditation". The data were recorded, fully transcribed and transported to the software ATLAS.ti, version 7.1 for access and management. Then, thematic content analysis was applied within the reference framework of Avedis Donabedian's Evaluation in Health. one large family was apprehended, called "Management Changes Resulting from the Accreditation: perspectives of managers and professionals" and five codes, related to the management changes in the operational, structural, financial and cost; top hospital management and quality management domains. the management changes in the hospital organizations resulting from the Accreditation were broad, multifaceted and in line with the improvements of the service quality. analizar las percepciones de gestores y trabajadores sobre los cambios en la gestión hospitalaria resultantes de la Acreditación. estudio descriptivo con aproximación cualitativa. Participaron cinco gestores de calidad hospitalaria y otros 91 trabajadores de las más diversas categorías profesionales, niveles jerárquicos y áreas de actuación de cuatro hospitales del sur de Brasil certificados por la Acreditación nacional de diferentes niveles, que contestaron la pregunta "Cuéntame sobre la gestión de este hospital, antes y después de la Acreditación". Los datos fueron grabados, transcritos por completo y transportados para acceso y manoseo en el software ATLAS.ti, versión 7.1. A seguir, fue aplicado el análisis de contenido, modalidad temática, a la luz del referencial de la Evaluación en Salud de Avedis Donabedian. fue aprendida una gran categoría temática (family), llamada "Cambios Gerenciales Resultantes de la Acreditación: perspectivas de gestores y trabajadores" y cinco subcategorías (codes), relacionadas a los cambios gerenciales en las esferas operacional; estructural; financiera y de costo; en la alta gestión hospitalaria; y en la gestión de calidad. los cambios gerenciales en las organizaciones hospitalarias, resultantes de la Acreditación, fueron amplias, polifacéticas y coherentes con las mejoras en la calidad de los servicios. analisar as percepções de gestores e trabalhadores sobre as mudanças no gerenciamento hospitalar advindas da Acreditação. estudo descritivo com abordagem qualitativa. Participaram cinco gestores da qualidade hospitalar e outros 91 trabalhadores das mais diversas categorias profissionais, níveis hierárquicos e áreas de atuação de quatro hospitais do sul do Brasil certificados pela Acreditação nacional de diferentes níveis, que responderam à questão "Fale-me sobre o gerenciamento deste hospital, antes e depois da Acreditação". Os dados foram gravados, transcritos na íntegra e transportados para acesso e manejo no software ATLAS.ti, versão 7.1. Após isso, procedeu-se a análise de conteúdo, modalidade temática, sustentada à luz do referencial da Avaliação em Saúde de Avedis Donabedian. apreendeu-se uma grande categoria temática (family), denominada "Mudanças Gerenciais Advindas da Acreditação: perspectivas de gestores e trabalhadores" e cinco subcategorias (codes), relacionadas às mudanças gerenciais no âmbito operacional; estrutural; financeiro e de custo; na alta gestão hospitalar; e na gestão da qualidade. as mudanças gerenciais nas organizações hospitalares, advindas da Acreditação, se mostraram amplas, multifacetadas e coadunam às melhorais da qualidade nos serviços.

MANAGEMENT OF ACUTE SEVERE ULCERATIVE COLITIS: A CLINICAL UPDATE.

PubMed

Sobrado, Carlos Walter; Sobrado, Lucas Faraco

2016-01-01

Acute severe colitis is a potentially lethal medical emergency and, even today, its treatment remains a challenge for clinicians and surgeons. Intravenous corticoid therapy, which was introduced into the therapeutic arsenal in the 1950s, continues to be the first-line treatment and, for patients who are refractory to this, the rescue therapy may consist of clinical measures or emergency colectomy. To evaluate the indications for and results from drug rescue therapy (cyclosporine, infliximab and tacrolimus), and to suggest a practical guide for clinical approaches. The literature was reviewed using the Medline/PubMed, Cochrane library and SciELO databases, and additional information from institutional websites of interest, by cross-correlating the following keywords: acute severe colitis, fulminating colitis and treatment. Treatments for acute severe colitis have avoided colectomy in 60-70% of the cases, provided that they have been started early on, with multidisciplinary follow-up. Despite the adverse effects of intravenous cyclosporine, this drug has been indicated in cases of greater severity with an imminent risk of colectomy, because of its fast action, short half-life and absence of increased risk of surgical complications. Therapy using infliximab has been reserved for less severe cases and those in which immunosuppressants are being or have been used (AZA/6-MP). Indication of biological agents has recently been favored because of their ease of therapeutic use, their good short and medium-term results, the possibility of maintenance therapy and also their action as a "bridge" for immunosuppressant action (AZA/6-MP). Colectomy has been reserved for cases in which there is still no response five to seven days after rescue therapy and in cases of complications (toxic megacolon, profuse hemorrhage and perforation). Patients with a good response to rescue therapy who do not undergo emergency operations should be considered for maintenance therapy using azathioprine. A surgical procedure is indicated for selected cases. A colite aguda grave é emergência médica, potencialmente letal e o seu tratamento permanece ainda nos dias de hoje um desafio para o clínico e cirurgião. A corticoterapia intravenosa introduzida no arsenal terapêutico na década de 50 permanece como primeira linha de tratamento, e nos pacientes refratários a tal medida, a terapia de resgate pode ser com medidas clínicas ou colectomia de urgência. Avaliar os resultados da terapia de resgate medicamentosa (ciclosporina, infliximabe e tracolimus), suas indicações e resultados, e sugerir um guia prático para abordagem clínica. Foi realizada revisão na literatura utilizando as bases Medline/Pubmed, Cochrane Library, Scielo, e informações adicionais em sites institucionais de interesse cruzando os descritores: colite aguda grave, colite fulminante e tratamento. O tratamento da colite aguda grave tem evitado a colectomia em 60- 70% dos casos, desde que iniciado precocemente e com acompanhamento multidisciplinar. A ciclosporina intravenosa apesar de seus efeitos adversos, tem sido indicada naqueles casos mais graves com risco iminente de colectomia, pela sua rapidez de ação, meia-vida curta, e não aumentar os riscos de complicações cirúrgicas. A terapia com infliximabe tem sido reservada para os casos menos graves e naqueles em uso ou já expostos a imunossupressores (AZA/6-MP). A facilidade terapêutica, seus bons resultados a curto e médio prazo, a possibilidade de terapia de manutenção e também por agir como "ponte" para ação de imunossupressores (AZA/6-MP) tem recentemente favorecido a indicação de biológicos. A colectomia fica reservada para casos que não apresentaram resposta a terapia de resgate após cinco a sete dias de tratamento e nas complicações (megacólon tóxico, hemorragia profusa e perfuração). s: Os pacientes com boa resposta à terapia de resgate e não submetidos à operações de urgência, deverão ser considerados para terapia de manutenção com azatioprina, sendo procedimento cirúrgico indicado para casos selecionados.

Exploring business process modelling paradigms and design-time to run-time transitions

NASA Astrophysics Data System (ADS)

Caron, Filip; Vanthienen, Jan

2016-09-01

The business process management literature describes a multitude of approaches (e.g. imperative, declarative or event-driven) that each result in a different mix of process flexibility, compliance, effectiveness and efficiency. Although the use of a single approach over the process lifecycle is often assumed, transitions between approaches at different phases in the process lifecycle may also be considered. This article explores several business process strategies by analysing the approaches at different phases in the process lifecycle as well as the various transitions.

System Engineering Concept Demonstration, Process Model. Volume 3

DTIC Science & Technology

1992-12-01

Process or Process Model The System Engineering process must be the enactment of the aforementioned definitions. Therefore, a process is an enactment of a...Prototype Tradeoff Scenario demonstrates six levels of abstraction in the Process Model. The Process Model symbology is explained within the "Help" icon ...dnofing no- ubeq t"vidi e /hn -am-a. lmi IzyuO ..pu Row _e._n au"c.ue-w’ ’- anuiildyidwile b ie htplup ?~imsav D symbo ,,ue,.dvu ,,dienl Flw s--..,fu..I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eun, H.C.; Cho, Y.Z.; Choi, J.H.

A regeneration process of LiCl-KCl eutectic waste salt generated from the pyrochemical process of spent nuclear fuel has been studied. This regeneration process is composed of a chemical conversion process and a vacuum distillation process. Through the regeneration process, a high efficiency of renewable salt recovery can be obtained from the waste salt and rare earth nuclides in the waste salt can be separated as oxide or phosphate forms. Thus, the regeneration process can contribute greatly to a reduction of the waste volume and a creation of durable final waste forms. (authors)

An open system approach to process reengineering in a healthcare operational environment.

PubMed

Czuchry, A J; Yasin, M M; Norris, J

2000-01-01

The objective of this study is to examine the applicability of process reengineering in a healthcare operational environment. The intake process of a mental healthcare service delivery system is analyzed systematically to identify process-related problems. A methodology which utilizes an open system orientation coupled with process reengineering is utilized to overcome operational and patient related problems associated with the pre-reengineered intake process. The systematic redesign of the intake process resulted in performance improvements in terms of cost, quality, service and timing.

Developing the JPL Engineering Processes

NASA Technical Reports Server (NTRS)

Linick, Dave; Briggs, Clark

2004-01-01

This paper briefly recounts the recent history of process reengineering at the NASA Jet Propulsion Laboratory, with a focus on the engineering processes. The JPL process structure is described and the process development activities of the past several years outlined. The main focus of the paper is on the current process structure, the emphasis on the flight project life cycle, the governance approach that lead to Flight Project Practices, and the remaining effort to capture process knowledge at the detail level of the work group.

Water-saving liquid-gas conditioning system

DOEpatents

Martin, Christopher; Zhuang, Ye

2014-01-14

A method for treating a process gas with a liquid comprises contacting a process gas with a hygroscopic working fluid in order to remove a constituent from the process gas. A system for treating a process gas with a liquid comprises a hygroscopic working fluid comprising a component adapted to absorb or react with a constituent of a process gas, and a liquid-gas contactor for contacting the working fluid and the process gas, wherein the constituent is removed from the process gas within the liquid-gas contactor.

Model for Simulating a Spiral Software-Development Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Curley, Charles; Nayak, Umanath

2010-01-01

A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code), productivity (number of lines of code per hour), and number of defects per source line of code. The user provides the number of resources, the overall percent of effort that should be allocated to each process step, and the number of desired staff members for each step. The output of PATT includes the size of the product, a measure of effort, a measure of rework effort, the duration of the entire process, and the numbers of injected, detected, and corrected defects as well as a number of other interesting features. In the development of the present model, steps were added to the IEEE 12207 waterfall process, and this model and its implementing software were made to run repeatedly through the sequence of steps, each repetition representing an iteration in a spiral process. Because the IEEE 12207 model is founded on a waterfall paradigm, it enables direct comparison of spiral and waterfall processes. The model can be used throughout a software-development project to analyze the project as more information becomes available. For instance, data from early iterations can be used as inputs to the model, and the model can be used to estimate the time and cost of carrying the project to completion.

Magnitude processing of symbolic and non-symbolic proportions: an fMRI study.

PubMed

Mock, Julia; Huber, Stefan; Bloechle, Johannes; Dietrich, Julia F; Bahnmueller, Julia; Rennig, Johannes; Klein, Elise; Moeller, Korbinian

2018-05-10

Recent research indicates that processing proportion magnitude is associated with activation in the intraparietal sulcus. Thus, brain areas associated with the processing of numbers (i.e., absolute magnitude) were activated during processing symbolic fractions as well as non-symbolic proportions. Here, we investigated systematically the cognitive processing of symbolic (e.g., fractions and decimals) and non-symbolic proportions (e.g., dot patterns and pie charts) in a two-stage procedure. First, we investigated relative magnitude-related activations of proportion processing. Second, we evaluated whether symbolic and non-symbolic proportions share common neural substrates. We conducted an fMRI study using magnitude comparison tasks with symbolic and non-symbolic proportions, respectively. As an indicator for magnitude-related processing of proportions, the distance effect was evaluated. A conjunction analysis indicated joint activation of specific occipito-parietal areas including right intraparietal sulcus (IPS) during proportion magnitude processing. More specifically, results indicate that the IPS, which is commonly associated with absolute magnitude processing, is involved in processing relative magnitude information as well, irrespective of symbolic or non-symbolic presentation format. However, we also found distinct activation patterns for the magnitude processing of the different presentation formats. Our findings suggest that processing for the separate presentation formats is not only associated with magnitude manipulations in the IPS, but also increasing demands on executive functions and strategy use associated with frontal brain regions as well as visual attention and encoding in occipital regions. Thus, the magnitude processing of proportions may not exclusively reflect processing of number magnitude information but also rather domain-general processes.

[Alcohol-purification technology and its particle sedimentation process in manufactory of Fufang Kushen injection].

PubMed

Liu, Xiaoqian; Tong, Yan; Wang, Jinyu; Wang, Ruizhen; Zhang, Yanxia; Wang, Zhimin

2011-11-01

Fufang Kushen injection was selected as the model drug, to optimize its alcohol-purification process and understand the characteristics of particle sedimentation process, and to investigate the feasibility of using process analytical technology (PAT) on traditional Chinese medicine (TCM) manufacturing. Total alkaloids (calculated by matrine, oxymatrine, sophoridine and oxysophoridine) and macrozamin were selected as quality evaluation markers to optimize the process of Fufang Kushen injection purification with alcohol. Process parameters of particulate formed in the alcohol-purification, such as the number, density and sedimentation velocity, were also determined to define the sedimentation time and well understand the process. The purification process was optimized as that alcohol is added to the concentrated extract solution (drug material) to certain concentration for 2 times and deposited the alcohol-solution containing drug-material to sediment for some time, i.e. 60% alcohol deposited for 36 hours, filter and then 80% -90% alcohol deposited for 6 hours in turn. The content of total alkaloids was decreased a little during the depositing process. The average settling time of particles with the diameters of 10, 25 microm were 157.7, 25.2 h in the first alcohol-purified process, and 84.2, 13.5 h in the second alcohol-purified process, respectively. The optimized alcohol-purification process remains the marker compositions better and compared with the initial process, it's time saving and much economy. The manufacturing quality of TCM-injection can be controlled by process. PAT pattern must be designed under the well understanding of process of TCM production.

Application of volume-retarded osmosis and low-pressure membrane hybrid process for water reclamation.

PubMed

Im, Sung-Ju; Choi, Jungwon; Lee, Jung-Gil; Jeong, Sanghyun; Jang, Am

2018-03-01

A new concept of volume-retarded osmosis and low-pressure membrane (VRO-LPM) hybrid process was developed and evaluated for the first time in this study. Commercially available forward osmosis (FO) and ultrafiltration (UF) membranes were employed in a VRO-LPM hybrid process to overcome energy limitations of draw solution (DS) regeneration and production of permeate in the FO process. To evaluate its feasibility as a water reclamation process, and to optimize the operational conditions, cross-flow FO and dead-end mode UF processes were individually evaluated. For the FO process, a DS concentration of 0.15 g mL -1 of polysulfonate styrene (PSS) was determined to be optimal, having a high flux with a low reverse salt flux. The UF membrane with a molecular weight cut-off of 1 kDa was chosen for its high PSS rejection in the LPM process. As a single process, UF (LPM) exhibited a higher flux than FO, but this could be controlled by adjusting the effective membrane area of the FO and UF membranes in the VRO-LPM system. The VRO-LPM hybrid process only required a circulation pump for the FO process. This led to a decrease in the specific energy consumption of the VRO-LPM process for potable water production, that was similar to the single FO process. Therefore, the newly developed VRO-LPM hybrid process, with an appropriate DS selection, can be used as an energy efficient water production method, and can outperform conventional water reclamation processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quality control process improvement of flexible printed circuit board by FMEA

NASA Astrophysics Data System (ADS)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Formulating poultry processing sanitizers from alkaline salts of fatty acids

USDA-ARS?s Scientific Manuscript database

Though some poultry processing operations remove microorganisms from carcasses; other processing operations cause cross-contamination that spreads microorganisms between carcasses, processing water, and processing equipment. One method used by commercial poultry processors to reduce microbial contam...

Fabrication Process for Cantilever Beam Micromechanical Switches

DTIC Science & Technology

1993-08-01

Beam Design ................................................................... 13 B. Chemistry and Materials Used in Cantilever Beam Process...7 3. Photomask levels and composite...pp 410-413. 5 2. Cantilever Beam Fabrication Process The beam fabrication process incorporates four different photomasking levels with 62 processing

Reports of planetary geology program, 1983

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1984-01-01

Several areas of the Planetary Geology Program were addressed including outer solar system satellites, asteroids, comets, Venus, cratering processes and landform development, volcanic processes, aeolian processes, fluvial processes, periglacial and permafrost processes, geomorphology, remote sensing, tectonics and stratigraphy, and mapping.

Cognitive Processes in Discourse Comprehension: Passive Processes, Reader-Initiated Processes, and Evolving Mental Representations

ERIC Educational Resources Information Center

van den Broek, Paul; Helder, Anne

2017-01-01

As readers move through a text, they engage in various types of processes that, if all goes well, result in a mental representation that captures their interpretation of the text. With each new text segment the reader engages in passive and, at times, reader-initiated processes. These processes are strongly influenced by the readers'…

The Use of Knowledge Based Decision Support Systems in Reengineering Selected Processes in the U. S. Marine Corps

DTIC Science & Technology

2001-09-01

measurable benefit in terms of process efficiency and effectiveness, business process reengineering (BPR) is becoming increasingly important. BPR suggests...technology by businesses in hopes of achieving a measurable benefit in terms of process efficiency and effectiveness, business process...KOPER-LITE ........................................13 E. HOW MIGHT THE MILITARY BENEFIT FROM PROCESS REENGINEERING EFFORTS

30 CFR 206.181 - How do I establish processing costs for dual accounting purposes when I do not process the gas?

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounting purposes when I do not process the gas? 206.181 Section 206.181 Mineral Resources MINERALS... Processing Allowances § 206.181 How do I establish processing costs for dual accounting purposes when I do not process the gas? Where accounting for comparison (dual accounting) is required for gas production...

Conceptual models of information processing

NASA Technical Reports Server (NTRS)

Stewart, L. J.

1983-01-01

The conceptual information processing issues are examined. Human information processing is defined as an active cognitive process that is analogous to a system. It is the flow and transformation of information within a human. The human is viewed as an active information seeker who is constantly receiving, processing, and acting upon the surrounding environmental stimuli. Human information processing models are conceptual representations of cognitive behaviors. Models of information processing are useful in representing the different theoretical positions and in attempting to define the limits and capabilities of human memory. It is concluded that an understanding of conceptual human information processing models and their applications to systems design leads to a better human factors approach.

Industrial application of semantic process mining

NASA Astrophysics Data System (ADS)

Espen Ingvaldsen, Jon; Atle Gulla, Jon

2012-05-01

Process mining relates to the extraction of non-trivial and useful information from information system event logs. It is a new research discipline that has evolved significantly since the early work on idealistic process logs. Over the last years, process mining prototypes have incorporated elements from semantics and data mining and targeted visualisation techniques that are more user-friendly to business experts and process owners. In this article, we present a framework for evaluating different aspects of enterprise process flows and address practical challenges of state-of-the-art industrial process mining. We also explore the inherent strengths of the technology for more efficient process optimisation.

Reliability and performance of a system-on-a-chip by predictive wear-out based activation of functional components

DOEpatents

Cher, Chen-Yong; Coteus, Paul W; Gara, Alan; Kursun, Eren; Paulsen, David P; Schuelke, Brian A; Sheets, II, John E; Tian, Shurong

2013-10-01

A processor-implemented method for determining aging of a processing unit in a processor the method comprising: calculating an effective aging profile for the processing unit wherein the effective aging profile quantifies the effects of aging on the processing unit; combining the effective aging profile with process variation data, actual workload data and operating conditions data for the processing unit; and determining aging through an aging sensor of the processing unit using the effective aging profile, the process variation data, the actual workload data, architectural characteristics and redundancy data, and the operating conditions data for the processing unit.

Fuzzy control of burnout of multilayer ceramic actuators

NASA Astrophysics Data System (ADS)

Ling, Alice V.; Voss, David; Christodoulou, Leo

1996-08-01

To improve the yield and repeatability of the burnout process of multilayer ceramic actuators (MCAs), an intelligent processing of materials (IPM-based) control system has been developed for the manufacture of MCAs. IPM involves the active (ultimately adaptive) control of a material process using empirical or analytical models and in situ sensing of critical process states (part features and process parameters) to modify the processing conditions in real time to achieve predefined product goals. Thus, the three enabling technologies for the IPM burnout control system are process modeling, in situ sensing and intelligent control. This paper presents the design of an IPM-based control strategy for the burnout process of MCAs.

Direct access inter-process shared memory

DOEpatents

Brightwell, Ronald B; Pedretti, Kevin; Hudson, Trammell B

2013-10-22

A technique for directly sharing physical memory between processes executing on processor cores is described. The technique includes loading a plurality of processes into the physical memory for execution on a corresponding plurality of processor cores sharing the physical memory. An address space is mapped to each of the processes by populating a first entry in a top level virtual address table for each of the processes. The address space of each of the processes is cross-mapped into each of the processes by populating one or more subsequent entries of the top level virtual address table with the first entry in the top level virtual address table from other processes.

Biotechnology in Food Production and Processing

NASA Astrophysics Data System (ADS)

Knorr, Dietrich; Sinskey, Anthony J.

1985-09-01

The food processing industry is the oldest and largest industry using biotechnological processes. Further development of food products and processes based on biotechnology depends upon the improvement of existing processes, such as fermentation, immobilized biocatalyst technology, and production of additives and processing aids, as well as the development of new opportunities for food biotechnology. Improvements are needed in the characterization, safety, and quality control of food materials, in processing methods, in waste conversion and utilization processes, and in currently used food microorganism and tissue culture systems. Also needed are fundamental studies of the structure-function relationship of food materials and of the cell physiology and biochemistry of raw materials.

What is a good public participation process? Five perspectives from the public.

PubMed

Webler, T; Tuler, S; Krueger, R

2001-03-01

It is now widely accepted that members of the public should be involved in environmental decision-making. This has inspired many to search for principles that characterize good public participation processes. In this paper we report on a study that identifies discourses about what defines a good process. Our case study was a forest planning process in northern New England and New York. We employed Q methodology to learn how participants characterize a good process differently, by selecting, defining, and privileging different principles. Five discourses, or perspectives, about good process emerged from our study. One perspective emphasizes that a good process acquires and maintains popular legitimacy. A second sees a good process as one that facilitates an ideological discussion. A third focuses on the fairness of the process. A fourth perspective conceptualizes participatory processes as a power struggle--in this instance a power play between local land-owning interests and outsiders. A fifth perspective highlights the need for leadership and compromise. Dramatic differences among these views suggest an important challenge for those responsible for designing and carrying out public participation processes. Conflicts may emerge about process designs because people disagree about what is good in specific contexts.

Alternating event processes during lifetimes: population dynamics and statistical inference.

PubMed

Shinohara, Russell T; Sun, Yifei; Wang, Mei-Cheng

2018-01-01

In the literature studying recurrent event data, a large amount of work has been focused on univariate recurrent event processes where the occurrence of each event is treated as a single point in time. There are many applications, however, in which univariate recurrent events are insufficient to characterize the feature of the process because patients experience nontrivial durations associated with each event. This results in an alternating event process where the disease status of a patient alternates between exacerbations and remissions. In this paper, we consider the dynamics of a chronic disease and its associated exacerbation-remission process over two time scales: calendar time and time-since-onset. In particular, over calendar time, we explore population dynamics and the relationship between incidence, prevalence and duration for such alternating event processes. We provide nonparametric estimation techniques for characteristic quantities of the process. In some settings, exacerbation processes are observed from an onset time until death; to account for the relationship between the survival and alternating event processes, nonparametric approaches are developed for estimating exacerbation process over lifetime. By understanding the population dynamics and within-process structure, the paper provide a new and general way to study alternating event processes.

Process mining in oncology using the MIMIC-III dataset

NASA Astrophysics Data System (ADS)

Prima Kurniati, Angelina; Hall, Geoff; Hogg, David; Johnson, Owen

2018-03-01

Process mining is a data analytics approach to discover and analyse process models based on the real activities captured in information systems. There is a growing body of literature on process mining in healthcare, including oncology, the study of cancer. In earlier work we found 37 peer-reviewed papers describing process mining research in oncology with a regular complaint being the limited availability and accessibility of datasets with suitable information for process mining. Publicly available datasets are one option and this paper describes the potential to use MIMIC-III, for process mining in oncology. MIMIC-III is a large open access dataset of de-identified patient records. There are 134 publications listed as using the MIMIC dataset, but none of them have used process mining. The MIMIC-III dataset has 16 event tables which are potentially useful for process mining and this paper demonstrates the opportunities to use MIMIC-III for process mining in oncology. Our research applied the L* lifecycle method to provide a worked example showing how process mining can be used to analyse cancer pathways. The results and data quality limitations are discussed along with opportunities for further work and reflection on the value of MIMIC-III for reproducible process mining research.

Research on the technique of large-aperture off-axis parabolic surface processing using tri-station machine and its applicability.

PubMed

Zhang, Xin; Luo, Xiao; Hu, Haixiang; Zhang, Xuejun

2015-09-01

In order to process large-aperture aspherical mirrors, we designed and constructed a tri-station machine processing center with a three station device, which bears vectored feed motion of up to 10 axes. Based on this processing center, an aspherical mirror-processing model is proposed, in which each station implements traversal processing of large-aperture aspherical mirrors using only two axes, while the stations are switchable, thus lowering cost and enhancing processing efficiency. The applicability of the tri-station machine is also analyzed. At the same time, a simple and efficient zero-calibration method for processing is proposed. To validate the processing model, using our processing center, we processed an off-axis parabolic SiC mirror with an aperture diameter of 1450 mm. The experimental results indicate that, with a one-step iterative process, the peak to valley (PV) and root mean square (RMS) of the mirror converged from 3.441 and 0.5203 μm to 2.637 and 0.2962 μm, respectively, where the RMS reduced by 43%. The validity and high accuracy of the model are thereby demonstrated.

Patterning of Indium Tin Oxide Films

NASA Technical Reports Server (NTRS)

Immer, Christopher

2008-01-01

A relatively rapid, economical process has been devised for patterning a thin film of indium tin oxide (ITO) that has been deposited on a polyester film. ITO is a transparent, electrically conductive substance made from a mixture of indium oxide and tin oxide that is commonly used in touch panels, liquid-crystal and plasma display devices, gas sensors, and solar photovoltaic panels. In a typical application, the ITO film must be patterned to form electrodes, current collectors, and the like. Heretofore it has been common practice to pattern an ITO film by means of either a laser ablation process or a photolithography/etching process. The laser ablation process includes the use of expensive equipment to precisely position and focus a laser. The photolithography/etching process is time-consuming. The present process is a variant of the direct toner process an inexpensive but often highly effective process for patterning conductors for printed circuits. Relative to a conventional photolithography/ etching process, this process is simpler, takes less time, and is less expensive. This process involves equipment that costs less than $500 (at 2005 prices) and enables patterning of an ITO film in a process time of less than about a half hour.

Assessment of Process Capability: the case of Soft Drinks Processing Unit

NASA Astrophysics Data System (ADS)

Sri Yogi, Kottala

2018-03-01

The process capability studies have significant impact in investigating process variation which is important in achieving product quality characteristics. Its indices are to measure the inherent variability of a process and thus to improve the process performance radically. The main objective of this paper is to understand capability of the process being produced within specification of the soft drinks processing unit, a premier brands being marketed in India. A few selected critical parameters in soft drinks processing: concentration of gas volume, concentration of brix, torque of crock has been considered for this study. Assessed some relevant statistical parameters: short term capability, long term capability as a process capability indices perspective. For assessment we have used real time data of soft drinks bottling company which is located in state of Chhattisgarh, India. As our research output suggested reasons for variations in the process which is validated using ANOVA and also predicted Taguchi cost function, assessed also predicted waste monetarily this shall be used by organization for improving process parameters. This research work has substantially benefitted the organization in understanding the various variations of selected critical parameters for achieving zero rejection.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dafler, J.R.; Sinnott, J.; Novil, M.

The first phase of a study to identify candidate processes and products suitable for future exploitation using high-temperature solar energy is presented. This phase has been principally analytical, consisting of techno-economic studies, thermodynamic assessments of chemical reactions and processes, and the determination of market potentials for major chemical commodities that use significant amounts of fossil resources today. The objective was to identify energy-intensive processes that would be suitable for the production of chemicals and fuels using solar energy process heat. Of particular importance was the comparison of relative costs and energy requirements for the selected solar product versus costs formore » the product derived from conventional processing. The assessment methodology used a systems analytical approach to identify processes and products having the greatest potential for solar energy-thermal processing. This approach was used to establish the basis for work to be carried out in subsequent phases of development. It has been the intent of the program to divide the analysis and process identification into the following three distinct areas: (1) process selection, (2) process evaluation, and (3) ranking of processes. Four conventional processes were selected for assessment namely, methanol synthesis, styrene monomer production, vinyl chloride monomer production, and terephthalic acid production.« less

An Application of X-Ray Fluorescence as Process Analytical Technology (PAT) to Monitor Particle Coating Processes.

PubMed

Nakano, Yoshio; Katakuse, Yoshimitsu; Azechi, Yasutaka

2018-06-01

An attempt to apply X-Ray Fluorescence (XRF) analysis to evaluate small particle coating process as a Process Analytical Technologies (PAT) was made. The XRF analysis was used to monitor coating level in small particle coating process with at-line manner. The small particle coating process usually consists of multiple coating processes. This study was conducted by a simple coating particles prepared by first coating of a model compound (DL-methionine) and second coating by talc on spherical microcrystalline cellulose cores. The particles with two layered coating are enough to demonstrate the small particle coating process. From the result by the small particle coating process, it was found that the XRF signal played different roles, resulting that XRF signals by first coating (layering) and second coating (mask coating) could demonstrate the extent with different mechanisms for the coating process. Furthermore, the particle coating of the different particle size has also been investigated to evaluate size effect of these coating processes. From these results, it was concluded that the XRF could be used as a PAT in monitoring particle coating processes and become powerful tool in pharmaceutical manufacturing.

Single-Run Single-Mask Inductively-Coupled-Plasma Reactive-Ion-Etching Process for Fabricating Suspended High-Aspect-Ratio Microstructures

NASA Astrophysics Data System (ADS)

Yang, Yao-Joe; Kuo, Wen-Cheng; Fan, Kuang-Chao

2006-01-01

In this work, we present a single-run single-mask (SRM) process for fabricating suspended high-aspect-ratio structures on standard silicon wafers using an inductively coupled plasma-reactive ion etching (ICP-RIE) etcher. This process eliminates extra fabrication steps which are required for structure release after trench etching. Released microstructures with 120 μm thickness are obtained by this process. The corresponding maximum aspect ratio of the trench is 28. The SRM process is an extended version of the standard process proposed by BOSCH GmbH (BOSCH process). The first step of the SRM process is a standard BOSCH process for trench etching, then a polymer layer is deposited on trench sidewalls as a protective layer for the subsequent structure-releasing step. The structure is released by dry isotropic etching after the polymer layer on the trench floor is removed. All the steps can be integrated into a single-run ICP process. Also, only one mask is required. Therefore, the process complexity and fabrication cost can be effectively reduced. Discussions on each SRM step and considerations for avoiding undesired etching of the silicon structures during the release process are also presented.

Auditory-musical processing in autism spectrum disorders: a review of behavioral and brain imaging studies.

PubMed

Ouimet, Tia; Foster, Nicholas E V; Tryfon, Ana; Hyde, Krista L

2012-04-01

Autism spectrum disorder (ASD) is a complex neurodevelopmental condition characterized by atypical social and communication skills, repetitive behaviors, and atypical visual and auditory perception. Studies in vision have reported enhanced detailed ("local") processing but diminished holistic ("global") processing of visual features in ASD. Individuals with ASD also show enhanced processing of simple visual stimuli but diminished processing of complex visual stimuli. Relative to the visual domain, auditory global-local distinctions, and the effects of stimulus complexity on auditory processing in ASD, are less clear. However, one remarkable finding is that many individuals with ASD have enhanced musical abilities, such as superior pitch processing. This review provides a critical evaluation of behavioral and brain imaging studies of auditory processing with respect to current theories in ASD. We have focused on auditory-musical processing in terms of global versus local processing and simple versus complex sound processing. This review contributes to a better understanding of auditory processing differences in ASD. A deeper comprehension of sensory perception in ASD is key to better defining ASD phenotypes and, in turn, may lead to better interventions. © 2012 New York Academy of Sciences.

Discrete State Change Model of Manufacturing Quality to Aid Assembly Process Design

NASA Astrophysics Data System (ADS)

Koga, Tsuyoshi; Aoyama, Kazuhiro

This paper proposes a representation model of the quality state change in an assembly process that can be used in a computer-aided process design system. In order to formalize the state change of the manufacturing quality in the assembly process, the functions, operations, and quality changes in the assembly process are represented as a network model that can simulate discrete events. This paper also develops a design method for the assembly process. The design method calculates the space of quality state change and outputs a better assembly process (better operations and better sequences) that can be used to obtain the intended quality state of the final product. A computational redesigning algorithm of the assembly process that considers the manufacturing quality is developed. The proposed method can be used to design an improved manufacturing process by simulating the quality state change. A prototype system for planning an assembly process is implemented and applied to the design of an auto-breaker assembly process. The result of the design example indicates that the proposed assembly process planning method outputs a better manufacturing scenario based on the simulation of the quality state change.

Effect of simulated mechanical recycling processes on the structure and properties of poly(lactic acid).

PubMed

Beltrán, F R; Lorenzo, V; Acosta, J; de la Orden, M U; Martínez Urreaga, J

2018-06-15

The aim of this work is to study the effects of different simulated mechanical recycling processes on the structure and properties of PLA. A commercial grade of PLA was melt compounded and compression molded, then subjected to two different recycling processes. The first recycling process consisted of an accelerated ageing and a second melt processing step, while the other recycling process included an accelerated ageing, a demanding washing process and a second melt processing step. The intrinsic viscosity measurements indicate that both recycling processes produce a degradation in PLA, which is more pronounced in the sample subjected to the washing process. DSC results suggest an increase in the mobility of the polymer chains in the recycled materials; however the degree of crystallinity of PLA seems unchanged. The optical, mechanical and gas barrier properties of PLA do not seem to be largely affected by the degradation suffered during the different recycling processes. These results suggest that, despite the degradation of PLA, the impact of the different simulated mechanical recycling processes on the final properties is limited. Thus, the potential use of recycled PLA in packaging applications is not jeopardized. Copyright © 2017 Elsevier Ltd. All rights reserved.

Consumption of ultra-processed foods predicts diet quality in Canada.

PubMed

Moubarac, Jean-Claude; Batal, M; Louzada, M L; Martinez Steele, E; Monteiro, C A

2017-01-01

This study describes food consumption patterns in Canada according to the types of food processing using the Nova classification and investigates the association between consumption of ultra-processed foods and the nutrient profile of the diet. Dietary intakes of 33,694 individuals from the 2004 Canadian Community Health Survey aged 2 years and above were analyzed. Food and drinks were classified using Nova into unprocessed or minimally processed foods, processed culinary ingredients, processed foods and ultra-processed foods. Average consumption (total daily energy intake) and relative consumption (% of total energy intake) provided by each of the food groups were calculated. Consumption of ultra-processed foods according to sex, age, education, residential location and relative family revenue was assessed. Mean nutrient content of ultra-processed foods and non-ultra-processed foods were compared, and the average nutrient content of the overall diet across quintiles of dietary share of ultra-processed foods was measured. In 2004, 48% of calories consumed by Canadians came from ultra-processed foods. Consumption of such foods was high amongst all socioeconomic groups, and particularly in children and adolescents. As a group, ultra-processed foods were grossly nutritionally inferior to non-ultra-processed foods. After adjusting for covariates, a significant and positive relationship was found between the dietary share of ultra-processed foods and the content in carbohydrates, free sugars, total and saturated fats and energy density, while an inverse relationship was observed with the dietary content in protein, fiber, vitamins A, C, D, B6 and B12, niacin, thiamine, riboflavin, as well as zinc, iron, magnesium, calcium, phosphorus and potassium. Lowering the dietary share of ultra-processed foods and raising consumption of hand-made meals from unprocessed or minimally processed foods would substantially improve the diet quality of Canadian. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of Statistical Process Control Methodology for an Environmentally Compliant Surface Cleaning Process in a Bonding Laboratory

NASA Technical Reports Server (NTRS)

Hutchens, Dale E.; Doan, Patrick A.; Boothe, Richard E.

1997-01-01

Bonding labs at both MSFC and the northern Utah production plant prepare bond test specimens which simulate or witness the production of NASA's Reusable Solid Rocket Motor (RSRM). The current process for preparing the bonding surfaces employs 1,1,1-trichloroethane vapor degreasing, which simulates the current RSRM process. Government regulations (e.g., the 1990 Amendments to the Clean Air Act) have mandated a production phase-out of a number of ozone depleting compounds (ODC) including 1,1,1-trichloroethane. In order to comply with these regulations, the RSRM Program is qualifying a spray-in-air (SIA) precision cleaning process using Brulin 1990, an aqueous blend of surfactants. Accordingly, surface preparation prior to bonding process simulation test specimens must reflect the new production cleaning process. The Bonding Lab Statistical Process Control (SPC) program monitors the progress of the lab and its capabilities, as well as certifies the bonding technicians, by periodically preparing D6AC steel tensile adhesion panels with EA-91 3NA epoxy adhesive using a standardized process. SPC methods are then used to ensure the process is statistically in control, thus producing reliable data for bonding studies, and identify any problems which might develop. Since the specimen cleaning process is being changed, new SPC limits must be established. This report summarizes side-by-side testing of D6AC steel tensile adhesion witness panels and tapered double cantilevered beams (TDCBs) using both the current baseline vapor degreasing process and a lab-scale spray-in-air process. A Proceco 26 inches Typhoon dishwasher cleaned both tensile adhesion witness panels and TDCBs in a process which simulates the new production process. The tests were performed six times during 1995, subsequent statistical analysis of the data established new upper control limits (UCL) and lower control limits (LCL). The data also demonstrated that the new process was equivalent to the vapor degreasing process.

Evaluation of stabilization techniques for ion implant processing

NASA Astrophysics Data System (ADS)

Ross, Matthew F.; Wong, Selmer S.; Minter, Jason P.; Marlowe, Trey; Narcy, Mark E.; Livesay, William R.

1999-06-01

With the integration of high current ion implant processing into volume CMOS manufacturing, the need for photoresist stabilization to achieve a stable ion implant process is critical. This study compares electron beam stabilization, a non-thermal process, with more traditional thermal stabilization techniques such as hot plate baking and vacuum oven processing. The electron beam processing is carried out in a flood exposure system with no active heating of the wafer. These stabilization techniques are applied to typical ion implant processes that might be found in a CMOS production process flow. The stabilization processes are applied to a 1.1 micrometers thick PFI-38A i-line photoresist film prior to ion implant processing. Post stabilization CD variation is detailed with respect to wall slope and feature integrity. SEM photographs detail the effects of the stabilization technique on photoresist features. The thermal stability of the photoresist is shown for different levels of stabilization and post stabilization thermal cycling. Thermal flow stability of the photoresist is detailed via SEM photographs. A significant improvement in thermal stability is achieved with the electron beam process, such that photoresist features are stable to temperatures in excess of 200 degrees C. Ion implant processing parameters are evaluated and compared for the different stabilization methods. Ion implant system end-station chamber pressure is detailed as a function of ion implant process and stabilization condition. The ion implant process conditions are detailed for varying factors such as ion current, energy, and total dose. A reduction in the ion implant systems end-station chamber pressure is achieved with the electron beam stabilization process over the other techniques considered. This reduction in end-station chamber pressure is shown to provide a reduction in total process time for a given ion implant dose. Improvements in the ion implant process are detailed across several combinations of current and energy.

The prevalence of medial coronoid process disease is high in lame large breed dogs and quantitative radiographic assessments contribute to the diagnosis.

PubMed

Mostafa, Ayman; Nolte, Ingo; Wefstaedt, Patrick

2018-06-05

Medial coronoid process disease is a common leading cause of thoracic limb lameness in dogs. Computed tomography and arthroscopy are superior to radiography to diagnose medial coronoid process disease, however, radiography remains the most available diagnostic imaging modality in veterinary practice. Objectives of this retrospective observational study were to describe the prevalence of medial coronoid process disease in lame large breed dogs and apply a novel method for quantifying the radiographic changes associated with medial coronoid process and subtrochlear-ulnar region in Labrador and Golden Retrievers with confirmed medial coronoid process disease. Purebred Labrador and Golden Retrievers (n = 143, 206 elbows) without and with confirmed medial coronoid process disease were included. The prevalence of medial coronoid process disease in lame large breed dogs was calculated. Mediolateral and craniocaudal radiographs of elbows were analyzed to assess the medial coronoid process length and morphology, and subtrochlear-ulnar width. Mean grayscale value was calculated for radial and subtrochlear-ulnar zones. The prevalence of medial coronoid process disease was 20.8%. Labrador and Golden Retrievers were the most affected purebred dogs (29.6%). Elbows with confirmed medial coronoid process disease had short (P < 0.0001) and deformed (∼95%) medial coronoid process, with associated medial coronoid process osteophytosis (7.5%). Subtrochlear-ulnar sclerosis was evidenced in ∼96% of diseased elbows, with a significant increase (P < 0.0001) in subtrochlear-ulnar width and standardized grayscale value. Radial grayscale value did not differ between groups. Periarticular osteophytosis was identified in 51.4% of elbows with medial coronoid process disease. Medial coronoid process length and morphology, and subtrochlear-ulnar width and standardized grayscale value varied significantly in dogs with confirmed medial coronoid process disease compared to controls. Findings indicated that medial coronoid process disease has a high prevalence in lame large breed dogs and that quantitative radiographic assessments can contribute to the diagnosis. © 2018 American College of Veterinary Radiology.

The role of rational and experiential processing in influencing the framing effect.

PubMed

Stark, Emily; Baldwin, Austin S; Hertel, Andrew W; Rothman, Alexander J

2017-01-01

Research on individual differences and the framing effect has focused primarily on how variability in rational processing influences choice. However, we propose that measuring only rational processing presents an incomplete picture of how participants are responding to framed options, as orthogonal individual differences in experiential processing might be relevant. In two studies, we utilize the Rational Experiential Inventory, which captures individual differences in rational and experiential processing, to investigate how both processing types influence decisions. Our results show that differences in experiential processing, but not rational processing, moderated the effect of frame on choice. We suggest that future research should more closely examine the influence of experiential processing on making decisions, to gain a broader understanding of the conditions that contribute to the framing effect.

Study and Analysis of The Robot-Operated Material Processing Systems (ROMPS)

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.

1996-01-01

This is a report presenting the progress of a research grant funded by NASA for work performed during 1 Oct. 1994 - 31 Sep. 1995. The report deals with the development and investigation of potential use of software for data processing for the Robot Operated Material Processing System (ROMPS). It reports on the progress of data processing of calibration samples processed by ROMPS in space and on earth. First data were retrieved using the I/O software and manually processed using MicroSoft Excel. Then the data retrieval and processing process was automated using a program written in C which is able to read the telemetry data and produce plots of time responses of sample temperatures and other desired variables. LabView was also employed to automatically retrieve and process the telemetry data.

Application of statistical process control and process capability analysis procedures in orbiter processing activities at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Safford, Robert R.; Jackson, Andrew E.; Swart, William W.; Barth, Timothy S.

1994-01-01

Successful ground processing at KSC requires that flight hardware and ground support equipment conform to specifications at tens of thousands of checkpoints. Knowledge of conformance is an essential requirement for launch. That knowledge of conformance at every requisite point does not, however, enable identification of past problems with equipment, or potential problem areas. This paper describes how the introduction of Statistical Process Control and Process Capability Analysis identification procedures into existing shuttle processing procedures can enable identification of potential problem areas and candidates for improvements to increase processing performance measures. Results of a case study describing application of the analysis procedures to Thermal Protection System processing are used to illustrate the benefits of the approaches described in the paper.

Separate cortical networks involved in music perception: preliminary functional MRI evidence for modularity of music processing.

PubMed

Schmithorst, Vincent J

2005-04-01

Music perception is a quite complex cognitive task, involving the perception and integration of various elements including melody, harmony, pitch, rhythm, and timbre. A preliminary functional MRI investigation of music perception was performed, using a simplified passive listening task. Group independent component analysis (ICA) was used to separate out various components involved in music processing, as the hemodynamic responses are not known a priori. Various components consistent with auditory processing, expressive language, syntactic processing, and visual association were found. The results are discussed in light of various hypotheses regarding modularity of music processing and its overlap with language processing. The results suggest that, while some networks overlap with ones used for language processing, music processing may involve its own domain-specific processing subsystems.

Industrial implementation of spatial variability control by real-time SPC

NASA Astrophysics Data System (ADS)

Roule, O.; Pasqualini, F.; Borde, M.

2016-10-01

Advanced technology nodes require more and more information to get the wafer process well setup. The critical dimension of components decreases following Moore's law. At the same time, the intra-wafer dispersion linked to the spatial non-uniformity of tool's processes is not capable to decrease in the same proportions. APC systems (Advanced Process Control) are being developed in waferfab to automatically adjust and tune wafer processing, based on a lot of process context information. It can generate and monitor complex intrawafer process profile corrections between different process steps. It leads us to put under control the spatial variability, in real time by our SPC system (Statistical Process Control). This paper will outline the architecture of an integrated process control system for shape monitoring in 3D, implemented in waferfab.

Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

NASA Technical Reports Server (NTRS)

Biess, J. J.; Yu, Y.; Middlebrook, R. D.; Schoenfeld, A. D.

1974-01-01

A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks.

Laser displacement sensor to monitor the layup process of composite laminate production

NASA Astrophysics Data System (ADS)

Miesen, Nick; Groves, Roger M.; Sinke, Jos; Benedictus, Rinze

2013-04-01

Several types of flaw can occur during the layup process of prepreg composite laminates. Quality control after the production process checks the end product by testing the specimens for flaws which are included during the layup process or curing process, however by then these flaws are already irreversibly embedded in the laminate. This paper demonstrates the use of a laser displacement sensor technique applied during the layup process of prepreg laminates for in-situ flaw detection, for typical flaws that can occur during the composite production process. An incorrect number of layers and fibre wrinkling are dominant flaws during the process of layup. These and other dominant flaws have been modeled to determine the requirements for an in-situ monitoring during the layup process of prepreg laminates.

Levels of integration in cognitive control and sequence processing in the prefrontal cortex.

PubMed

Bahlmann, Jörg; Korb, Franziska M; Gratton, Caterina; Friederici, Angela D

2012-01-01

Cognitive control is necessary to flexibly act in changing environments. Sequence processing is needed in language comprehension to build the syntactic structure in sentences. Functional imaging studies suggest that sequence processing engages the left ventrolateral prefrontal cortex (PFC). In contrast, cognitive control processes additionally recruit bilateral rostral lateral PFC regions. The present study aimed to investigate these two types of processes in one experimental paradigm. Sequence processing was manipulated using two different sequencing rules varying in complexity. Cognitive control was varied with different cue-sets that determined the choice of a sequencing rule. Univariate analyses revealed distinct PFC regions for the two types of processing (i.e. sequence processing: left ventrolateral PFC and cognitive control processing: bilateral dorsolateral and rostral PFC). Moreover, in a common brain network (including left lateral PFC and intraparietal sulcus) no interaction between sequence and cognitive control processing was observed. In contrast, a multivariate pattern analysis revealed an interaction of sequence and cognitive control processing, such that voxels in left lateral PFC and parietal cortex showed different tuning functions for tasks involving different sequencing and cognitive control demands. These results suggest that the difference between the process of rule selection (i.e. cognitive control) and the process of rule-based sequencing (i.e. sequence processing) find their neuronal underpinnings in distinct activation patterns in lateral PFC. Moreover, the combination of rule selection and rule sequencing can shape the response of neurons in lateral PFC and parietal cortex.

Levels of Integration in Cognitive Control and Sequence Processing in the Prefrontal Cortex

PubMed Central

Bahlmann, Jörg; Korb, Franziska M.; Gratton, Caterina; Friederici, Angela D.

2012-01-01

Cognitive control is necessary to flexibly act in changing environments. Sequence processing is needed in language comprehension to build the syntactic structure in sentences. Functional imaging studies suggest that sequence processing engages the left ventrolateral prefrontal cortex (PFC). In contrast, cognitive control processes additionally recruit bilateral rostral lateral PFC regions. The present study aimed to investigate these two types of processes in one experimental paradigm. Sequence processing was manipulated using two different sequencing rules varying in complexity. Cognitive control was varied with different cue-sets that determined the choice of a sequencing rule. Univariate analyses revealed distinct PFC regions for the two types of processing (i.e. sequence processing: left ventrolateral PFC and cognitive control processing: bilateral dorsolateral and rostral PFC). Moreover, in a common brain network (including left lateral PFC and intraparietal sulcus) no interaction between sequence and cognitive control processing was observed. In contrast, a multivariate pattern analysis revealed an interaction of sequence and cognitive control processing, such that voxels in left lateral PFC and parietal cortex showed different tuning functions for tasks involving different sequencing and cognitive control demands. These results suggest that the difference between the process of rule selection (i.e. cognitive control) and the process of rule-based sequencing (i.e. sequence processing) find their neuronal underpinnings in distinct activation patterns in lateral PFC. Moreover, the combination of rule selection and rule sequencing can shape the response of neurons in lateral PFC and parietal cortex. PMID:22952762

Flow chemistry using milli- and microstructured reactors-from conventional to novel process windows.

PubMed

Illg, Tobias; Löb, Patrick; Hessel, Volker

2010-06-01

The terminology Novel Process Window unites different methods to improve existing processes by applying unconventional and harsh process conditions like: process routes at much elevated pressure, much elevated temperature, or processing in a thermal runaway regime to achieve a significant impact on process performance. This paper is a review of parts of IMM's works in particular the applicability of above mentioned Novel Process Windows on selected chemical reactions. First, general characteristics of microreactors are discussed like excellent mass and heat transfer and improved mixing quality. Different types of reactions are presented in which the use of microstructured devices led to an increased process performance by applying Novel Process Windows. These examples were chosen to demonstrate how chemical reactions can benefit from the use of milli- and microstructured devices and how existing protocols can be changed toward process conditions hitherto not applicable in standard laboratory equipment. The used milli- and microstructured reactors can also offer advantages in other areas, for example, high-throughput screening of catalysts and better control of size distribution in a particle synthesis process by improved mixing, etc. The chemical industry is under continuous improvement. So, a lot of research is being done to synthesize high value chemicals, to optimize existing processes in view of process safety and energy consumption and to search for new routes to produce such chemicals. Leitmotifs of such undertakings are often sustainable development(1) and Green Chemistry(2).

Fast but fleeting: adaptive motor learning processes associated with aging and cognitive decline.

PubMed

Trewartha, Kevin M; Garcia, Angeles; Wolpert, Daniel M; Flanagan, J Randall

2014-10-01

Motor learning has been shown to depend on multiple interacting learning processes. For example, learning to adapt when moving grasped objects with novel dynamics involves a fast process that adapts and decays quickly-and that has been linked to explicit memory-and a slower process that adapts and decays more gradually. Each process is characterized by a learning rate that controls how strongly motor memory is updated based on experienced errors and a retention factor determining the movement-to-movement decay in motor memory. Here we examined whether fast and slow motor learning processes involved in learning novel dynamics differ between younger and older adults. In addition, we investigated how age-related decline in explicit memory performance influences learning and retention parameters. Although the groups adapted equally well, they did so with markedly different underlying processes. Whereas the groups had similar fast processes, they had different slow processes. Specifically, the older adults exhibited decreased retention in their slow process compared with younger adults. Within the older group, who exhibited considerable variation in explicit memory performance, we found that poor explicit memory was associated with reduced retention in the fast process, as well as the slow process. These findings suggest that explicit memory resources are a determining factor in impairments in the both the fast and slow processes for motor learning but that aging effects on the slow process are independent of explicit memory declines. Copyright © 2014 the authors 0270-6474/14/3413411-11$15.00/0.

Parallel Activation in Bilingual Phonological Processing

ERIC Educational Resources Information Center

Lee, Su-Yeon

2011-01-01

In bilingual language processing, the parallel activation hypothesis suggests that bilinguals activate their two languages simultaneously during language processing. Support for the parallel activation mainly comes from studies of lexical (word-form) processing, with relatively less attention to phonological (sound) processing. According to…

OCLC-MARC Tape Processing: A Functional Analysis.

ERIC Educational Resources Information Center

Miller, Bruce Cummings

1984-01-01

Analyzes structure of, and data in, the OCLC-MARC record in the form delivered via OCLC's Tape Subscription Service, and outlines important processing functions involved: "unreadable tapes," duplicate records and deduping, match processing, choice processing, locations processing, "automatic" and "input" stamps,…

7 Processes that Enable NASA Software Engineering Technologies: Value-Added Process Engineering

NASA Technical Reports Server (NTRS)

Housch, Helen; Godfrey, Sally

2011-01-01

The presentation reviews Agency process requirements and the purpose, benefits, and experiences or seven software engineering processes. The processes include: product integration, configuration management, verification, software assurance, measurement and analysis, requirements management, and planning and monitoring.

Risk-based Strategy to Determine Testing Requirement for the Removal of Residual Process Reagents as Process-related Impurities in Bioprocesses.

PubMed

Qiu, Jinshu; Li, Kim; Miller, Karen; Raghani, Anil

2015-01-01

The purpose of this article is to recommend a risk-based strategy for determining clearance testing requirements of the process reagents used in manufacturing biopharmaceutical products. The strategy takes account of four risk factors. Firstly, the process reagents are classified into two categories according to their safety profile and history of use: generally recognized as safe (GRAS) and potential safety concern (PSC) reagents. The clearance testing of GRAS reagents can be eliminated because of their safe use historically and process capability to remove these reagents. An estimated safety margin (Se) value, a ratio of the exposure limit to the estimated maximum reagent amount, is then used to evaluate the necessity for testing the PSC reagents at an early development stage. The Se value is calculated from two risk factors, the starting PSC reagent amount per maximum product dose (Me), and the exposure limit (Le). A worst-case scenario is assumed to estimate the Me value, that is common. The PSC reagent of interest is co-purified with the product and no clearance occurs throughout the entire purification process. No clearance testing is required for this PSC reagent if its Se value is ≥1; otherwise clearance testing is needed. Finally, the point of the process reagent introduction to the process is also considered in determining the necessity of the clearance testing for process reagents. How to use the measured safety margin as a criterion for determining PSC reagent testing at process characterization, process validation, and commercial production stages are also described. A large number of process reagents are used in the biopharmaceutical manufacturing to control the process performance. Clearance testing for all of the process reagents will be an enormous analytical task. In this article, a risk-based strategy is described to eliminate unnecessary clearance testing for majority of the process reagents using four risk factors. The risk factors included in the strategy are (i) safety profile of the reagents, (ii) the starting amount of the process reagents used in the manufacturing process, (iii) the maximum dose of the product, and (iv) the point of introduction of the process reagents in the process. The implementation of the risk-based strategy can eliminate clearance testing for approximately 90% of the process reagents used in the manufacturing processes. This science-based strategy allows us to ensure patient safety and meet regulatory agency expectations throughout the product development life cycle. © PDA, Inc. 2015.

Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Saima, E-mail: saima.ali@aalto.fi; Hannula, Simo-Pekka

Titania nanotube (TNT) powders are prepared by rapid break down anodization (RBA) in a 0.1 M perchloric acid (HClO{sub 4}) solution (Process 1), and ethylene glycol (EG) mixture with HClO{sub 4} and water (Process 2). A study of the as-prepared and calcined TNT powders obtained by both processes is implemented to evaluate and compare the morphology, crystal structure, specific surface area, and the composition of the nanotubes. Longer TNTs are formed in Process 1, while comparatively larger pore diameter and wall thickness are obtained for the nanotubes prepared by Process 2. The TNTs obtained by Process 1 are converted tomore » nanorods at 350 °C, while nanotubes obtained by Process 2 preserve tubular morphology till 350 °C. In addition, the TNTs prepared by an aqueous electrolyte have a crystalline structure, whereas the TNTs obtained by Process 2 are amorphous. Samples calcined till 450 °C have XRD peaks from the anatase phase, while the rutile phase appears at 550 °C for the TNTs prepared by both processes. The Raman spectra also show clear anatase peaks for all samples except the as-prepared sample obtained by Process 2, thus supporting the XRD findings. FTIR spectra reveal the presence of O-H groups in the structure for the TNTs obtained by both processes. However, the presence is less prominent for annealed samples. Additionally, TNTs obtained by Process 2 have a carbonaceous impurity present in the structure attributed to the electrolyte used in that process. While a negligible weight loss is typical for TNTs prepared from aqueous electrolytes, a weight loss of 38.6% in the temperature range of 25–600 °C is found for TNTs prepared in EG electrolyte (Process 2). A large specific surface area of 179.2 m{sup 2} g{sup −1} is obtained for TNTs prepared by Process 1, whereas Process 2 produces nanotubes with a lower specific surface area. The difference appears to correspond to the dimensions of the nanotubes obtained by the two processes. - Graphical abstract: Titania nanotube powders prepared by Process 1 and Process 2 have different crystal structure and specific surface area. - Highlights: • Titania nanotube (TNT) powder is prepared in low water organic electrolyte. • Characterization of TNT powders prepared from aqueous and organic electrolyte. • TNTs prepared by Process 1 are crystalline with higher specific surface area. • TNTs obtained by Process 2 have carbonaceous impurities in the structure.« less

A processing approach to the working memory/long-term memory distinction: evidence from the levels-of-processing span task.

PubMed

Rose, Nathan S; Craik, Fergus I M

2012-07-01

Recent theories suggest that performance on working memory (WM) tasks involves retrieval from long-term memory (LTM). To examine whether WM and LTM tests have common principles, Craik and Tulving's (1975) levels-of-processing paradigm, which is known to affect LTM, was administered as a WM task: Participants made uppercase, rhyme, or category-membership judgments about words, and immediate recall of the words was required after every 3 or 8 processing judgments. In Experiment 1, immediate recall did not demonstrate a levels-of-processing effect, but a subsequent LTM test (delayed recognition) of the same words did show a benefit of deeper processing. Experiment 2 showed that surprise immediate recall of 8-item lists did demonstrate a levels-of-processing effect, however. A processing account of the conditions in which levels-of-processing effects are and are not found in WM tasks was advanced, suggesting that the extent to which levels-of-processing effects are similar between WM and LTM tests largely depends on the amount of disruption to active maintenance processes. 2012 APA, all rights reserved

Emotional words can be embodied or disembodied: the role of superficial vs. deep types of processing

PubMed Central

Abbassi, Ensie; Blanchette, Isabelle; Ansaldo, Ana I.; Ghassemzadeh, Habib; Joanette, Yves

2015-01-01

Emotional words are processed rapidly and automatically in the left hemisphere (LH) and slowly, with the involvement of attention, in the right hemisphere (RH). This review aims to find the reason for this difference and suggests that emotional words can be processed superficially or deeply due to the involvement of the linguistic and imagery systems, respectively. During superficial processing, emotional words likely make connections only with semantically associated words in the LH. This part of the process is automatic and may be sufficient for the purpose of language processing. Deep processing, in contrast, seems to involve conceptual information and imagery of a word’s perceptual and emotional properties using autobiographical memory contents. Imagery and the involvement of autobiographical memory likely differentiate between emotional and neutral word processing and explain the salient role of the RH in emotional word processing. It is concluded that the level of emotional word processing in the RH should be deeper than in the LH and, thus, it is conceivable that the slow mode of processing adds certain qualities to the output. PMID:26217288

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

PubMed Central

Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

2010-01-01

Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

Adaptive memory: determining the proximate mechanisms responsible for the memorial advantages of survival processing.

PubMed

Burns, Daniel J; Burns, Sarah A; Hwang, Ana J

2011-01-01

J. S. Nairne, S. R. Thompson, and J. N. S. Pandeirada (2007) suggested that our memory systems may have evolved to help us remember fitness-relevant information and showed that retention of words rated for their relevance to survival is superior to that of words encoded under other deep processing conditions. The authors present 4 experiments that uncover the proximate mechanisms likely responsible. The authors obtained a recall advantage for survival processing compared with conditions that promoted only item-specific processing or only relational processing. This effect was eliminated when control conditions encouraged both item-specific and relational processing. Data from separate measures of item-specific and relational processing generally were consistent with the view that the memorial advantage for survival processing results from the encoding of both types of processing. Although the present study suggests the proximate mechanisms for the effect, the authors argue that survival processing may be fundamentally different from other memory phenomena for which item-specific and relational processing differences have been implicated. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

Implementation of quality by design toward processing of food products.

PubMed

Rathore, Anurag S; Kapoor, Gautam

2017-05-28

Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

Energy saving processes for nitrogen removal in organic wastewater from food processing industries in Thailand.

PubMed

Johansen, N H; Suksawad, N; Balslev, P

2004-01-01

Nitrogen removal from organic wastewater is becoming a demand in developed communities. The use of nitrite as intermediate in the treatment of wastewater has been largely ignored, but is actually a relevant energy saving process compared to conventional nitrification/denitrification using nitrate as intermediate. Full-scale results and pilot-scale results using this process are presented. The process needs some additional process considerations and process control to be utilized. Especially under tropical conditions the nitritation process will round easily, and it must be expected that many AS treatment plants in the food industry already produce NO2-N. This uncontrolled nitrogen conversion can be the main cause for sludge bulking problems. It is expected that sludge bulking problems in many cases can be solved just by changing the process control in order to run a more consequent nitritation. Theoretically this process will decrease the oxygen consumption for oxidation by 25% and the use of carbon source for the reduction will be decreased by 40% compared to the conventional process.

Application of Ozone MBBR Process in Refinery Wastewater Treatment

NASA Astrophysics Data System (ADS)

Lin, Wang

2018-01-01

Moving Bed Biofilm Reactor (MBBR) is a kind of sewage treatment technology based on fluidized bed. At the same time, it can also be regarded as an efficient new reactor between active sludge method and the biological membrane method. The application of ozone MBBR process in refinery wastewater treatment is mainly studied. The key point is to design the ozone +MBBR combined process based on MBBR process. The ozone +MBBR process is used to analyze the treatment of concentrated water COD discharged from the refinery wastewater treatment plant. The experimental results show that the average removal rate of COD is 46.0%~67.3% in the treatment of reverse osmosis concentrated water by ozone MBBR process, and the effluent can meet the relevant standard requirements. Compared with the traditional process, the ozone MBBR process is more flexible. The investment of this process is mainly ozone generator, blower and so on. The prices of these items are relatively inexpensive, and these costs can be offset by the excess investment in traditional activated sludge processes. At the same time, ozone MBBR process has obvious advantages in water quality, stability and other aspects.

Models of recognition: A review of arguments in favor of a dual-process account

PubMed Central

DIANA, RACHEL A.; REDER, LYNNE M.; ARNDT, JASON; PARK, HEEKYEONG

2008-01-01

The majority of computationally specified models of recognition memory have been based on a single-process interpretation, claiming that familiarity is the only influence on recognition. There is increasing evidence that recognition is, in fact, based on two processes: recollection and familiarity. This article reviews the current state of the evidence for dual-process models, including the usefulness of the remember/know paradigm, and interprets the relevant results in terms of the source of activation confusion (SAC) model of memory. We argue that the evidence from each of the areas we discuss, when combined, presents a strong case that inclusion of a recollection process is necessary. Given this conclusion, we also argue that the dual-process claim that the recollection process is always available is, in fact, more parsimonious than the single-process claim that the recollection process is used only in certain paradigms. The value of a well-specified process model such as the SAC model is discussed with regard to other types of dual-process models. PMID:16724763

Emotional words can be embodied or disembodied: the role of superficial vs. deep types of processing.

PubMed

Abbassi, Ensie; Blanchette, Isabelle; Ansaldo, Ana I; Ghassemzadeh, Habib; Joanette, Yves

2015-01-01

Emotional words are processed rapidly and automatically in the left hemisphere (LH) and slowly, with the involvement of attention, in the right hemisphere (RH). This review aims to find the reason for this difference and suggests that emotional words can be processed superficially or deeply due to the involvement of the linguistic and imagery systems, respectively. During superficial processing, emotional words likely make connections only with semantically associated words in the LH. This part of the process is automatic and may be sufficient for the purpose of language processing. Deep processing, in contrast, seems to involve conceptual information and imagery of a word's perceptual and emotional properties using autobiographical memory contents. Imagery and the involvement of autobiographical memory likely differentiate between emotional and neutral word processing and explain the salient role of the RH in emotional word processing. It is concluded that the level of emotional word processing in the RH should be deeper than in the LH and, thus, it is conceivable that the slow mode of processing adds certain qualities to the output.

Techno-economic analysis of biocatalytic processes for production of alkene expoxides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borole, Abhijeet P

2007-01-01

A techno-economic analysis of two different bioprocesses was conducted, one for the conversion of propylene to propylene oxide (PO) and other for conversion of styrene to styrene expoxide (SO). The first process was a lipase-mediated chemo-enzymatic reaction, whereas the second one was a one-step enzymatic process using chloroperoxidase. The PO produced through the chemo-enzymatic process is a racemic product, whereas the latter process (based on chloroperoxidase) produces an enantio-pure product. The former process thus falls under the category of high-volume commodity chemical (PO); whereas the latter is a low-volume, high-value product (SO).A simulation of the process was conducted using themore » bioprocess engineering software SuperPro Designer v6.0 (Intelligen, Inc., Scotch Plains, NJ) to determine the economic feasibility of the process. The purpose of the exercise was to compare biocatalytic processes with existing chemical processes for production of alkene expoxides. The results show that further improvements are needed in improving biocatalyst stability to make these bioprocesses competitive with chemical processes.« less

The representation of conceptual knowledge: visual, auditory, and olfactory imagery compared with semantic processing.

PubMed

Palmiero, Massimiliano; Di Matteo, Rosalia; Belardinelli, Marta Olivetti

2014-05-01

Two experiments comparing imaginative processing in different modalities and semantic processing were carried out to investigate the issue of whether conceptual knowledge can be represented in different format. Participants were asked to judge the similarity between visual images, auditory images, and olfactory images in the imaginative block, if two items belonged to the same category in the semantic block. Items were verbally cued in both experiments. The degree of similarity between the imaginative and semantic items was changed across experiments. Experiment 1 showed that the semantic processing was faster than the visual and the auditory imaginative processing, whereas no differentiation was possible between the semantic processing and the olfactory imaginative processing. Experiment 2 revealed that only the visual imaginative processing could be differentiated from the semantic processing in terms of accuracy. These results showed that the visual and auditory imaginative processing can be differentiated from the semantic processing, although both visual and auditory images strongly rely on semantic representations. On the contrary, no differentiation is possible within the olfactory domain. Results are discussed in the frame of the imagery debate.

Working memory load eliminates the survival processing effect.

PubMed

Kroneisen, Meike; Rummel, Jan; Erdfelder, Edgar

2014-01-01

In a series of experiments, Nairne, Thompson, and Pandeirada (2007) demonstrated that words judged for their relevance to a survival scenario are remembered better than words judged for a scenario not relevant on a survival dimension. They explained this survival-processing effect by arguing that nature "tuned" our memory systems to process and remember fitness-relevant information. Kroneisen and Erdfelder (2011) proposed that it may not be survival processing per se that facilitates recall but the richness and distinctiveness with which information is encoded. To further test this account, we investigated how the survival processing effect is affected by cognitive load. If the survival processing effect is due to automatic processes or, alternatively, if survival processing is routinely prioritized in dual-task contexts, we would expect this effect to persist under cognitive load conditions. If the effect relies on cognitively demanding processes like richness and distinctiveness of encoding, however, the survival processing benefit should be hampered by increased cognitive load during encoding. Results were in line with the latter prediction, that is, the survival processing effect vanished under dual-task conditions.

E-learning process maturity level: a conceptual framework

NASA Astrophysics Data System (ADS)

Rahmah, A.; Santoso, H. B.; Hasibuan, Z. A.

2018-03-01

ICT advancement is a sure thing with the impact influencing many domains, including learning in both formal and informal situations. It leads to a new mindset that we should not only utilize the given ICT to support the learning process, but also improve it gradually involving a lot of factors. These phenomenon is called e-learning process evolution. Accordingly, this study attempts to explore maturity level concept to provide the improvement direction gradually and progression monitoring for the individual e-learning process. Extensive literature review, observation, and forming constructs are conducted to develop a conceptual framework for e-learning process maturity level. The conceptual framework consists of learner, e-learning process, continuous improvement, evolution of e-learning process, technology, and learning objectives. Whilst, evolution of e-learning process depicted as current versus expected conditions of e-learning process maturity level. The study concludes that from the e-learning process maturity level conceptual framework, it may guide the evolution roadmap for e-learning process, accelerate the evolution, and decrease the negative impact of ICT. The conceptual framework will be verified and tested in the future study.

Heat input and accumulation for ultrashort pulse processing with high average power

NASA Astrophysics Data System (ADS)

Finger, Johannes; Bornschlegel, Benedikt; Reininghaus, Martin; Dohrn, Andreas; Nießen, Markus; Gillner, Arnold; Poprawe, Reinhart

2018-05-01

Materials processing using ultrashort pulsed laser radiation with pulse durations <10 ps is known to enable very precise processing with negligible thermal load. However, even for the application of picosecond and femtosecond laser radiation, not the full amount of the absorbed energy is converted into ablation products and a distinct fraction of the absorbed energy remains as residual heat in the processed workpiece. For low average power and power densities, this heat is usually not relevant for the processing results and dissipates into the workpiece. In contrast, when higher average powers and repetition rates are applied to increase the throughput and upscale ultrashort pulse processing, this heat input becomes relevant and significantly affects the achieved processing results. In this paper, we outline the relevance of heat input for ultrashort pulse processing, starting with the heat input of a single ultrashort laser pulse. Heat accumulation during ultrashort pulse processing with high repetition rate is discussed as well as heat accumulation for materials processing using pulse bursts. In addition, the relevance of heat accumulation with multiple scanning passes and processing with multiple laser spots is shown.

Defining and reconstructing clinical processes based on IHE and BPMN 2.0.

PubMed

Strasser, Melanie; Pfeifer, Franz; Helm, Emmanuel; Schuler, Andreas; Altmann, Josef

2011-01-01

This paper describes the current status and the results of our process management system for defining and reconstructing clinical care processes, which contributes to compare, analyze and evaluate clinical processes and further to identify high cost tasks or stays. The system is founded on IHE, which guarantees standardized interfaces and interoperability between clinical information systems. At the heart of the system there is BPMN, a modeling notation and specification language, which allows the definition and execution of clinical processes. The system provides functionality to define healthcare information system independent clinical core processes and to execute the processes in a workflow engine. Furthermore, the reconstruction of clinical processes is done by evaluating an IHE audit log database, which records patient movements within a health care facility. The main goal of the system is to assist hospital operators and clinical process managers to detect discrepancies between defined and actual clinical processes and as well to identify main causes of high medical costs. Beyond that, the system can potentially contribute to reconstruct and improve clinical processes and enhance cost control and patient care quality.

Process qualification and testing of LENS deposited AY1E0125 D-bottle brackets.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atwood, Clinton J.; Smugeresky, John E.; Jew, Michael

2006-11-01

The LENS Qualification team had the goal of performing a process qualification for the Laser Engineered Net Shaping{trademark}(LENS{reg_sign}) process. Process Qualification requires that a part be selected for process demonstration. The AY1E0125 D-Bottle Bracket from the W80-3 was selected for this work. The repeatability of the LENS process was baselined to determine process parameters. Six D-Bottle brackets were deposited using LENS, machined to final dimensions, and tested in comparison to conventionally processed brackets. The tests, taken from ES1E0003, included a mass analysis and structural dynamic testing including free-free and assembly-level modal tests, and Haversine shock tests. The LENS brackets performedmore » with very similar characteristics to the conventionally processed brackets. Based on the results of the testing, it was concluded that the performance of the brackets made them eligible for parallel path testing in subsystem level tests. The testing results and process rigor qualified the LENS process as detailed in EER200638525A.« less

Sustainability assessment of shielded metal arc welding (SMAW) process

NASA Astrophysics Data System (ADS)

Alkahla, Ibrahim; Pervaiz, Salman

2017-09-01

Shielded metal arc welding (SMAW) process is one of the most commonly employed material joining processes utilized in the various industrial sectors such as marine, ship-building, automotive, aerospace, construction and petrochemicals etc. The increasing pressure on manufacturing sector wants the welding process to be sustainable in nature. The SMAW process incorporates several types of inputs and output streams. The sustainability concerns associated with SMAW process are linked with the various input and output streams such as electrical energy requirement, input material consumptions, slag formation, fumes emission and hazardous working conditions associated with the human health and occupational safety. To enhance the environmental performance of the SMAW welding process, there is a need to characterize the sustainability for the SMAW process under the broad framework of sustainability. Most of the available literature focuses on the technical and economic aspects of the welding process, however the environmental and social aspects are rarely addressed. The study reviews SMAW process with respect to the triple bottom line (economic, environmental and social) sustainability approach. Finally, the study concluded recommendations towards achieving economical and sustainable SMAW welding process.

Decontamination and disposal of PCB wastes.

PubMed Central

Johnston, L E

1985-01-01

Decontamination and disposal processes for PCB wastes are reviewed. Processes are classed as incineration, chemical reaction or decontamination. Incineration technologies are not limited to the rigorous high temperature but include those where innovations in use of oxident, heat transfer and residue recycle are made. Chemical processes include the sodium processes, radiant energy processes and low temperature oxidations. Typical processing rates and associated costs are provided where possible. PMID:3928363

Logistics Control Facility: A Normative Model for Total Asset Visibility in the Air Force Logistics System

DTIC Science & Technology

1994-09-01

IIssue Computers, information systems, and communication systems are being increasingly used in transportation, warehousing, order processing , materials...inventory levels, reduced order processing times, reduced order processing costs, and increased customer satisfaction. While purchasing and transportation...process, the speed in which crders are processed would increase significantly. Lowering the order processing time in turn lowers the lead time, which in

Definition and documentation of engineering processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, G.W.

1997-11-01

This tutorial is an extract of a two-day workshop developed under the auspices of the Quality Engineering Department at Sandia National Laboratories. The presentation starts with basic definitions and addresses why processes should be defined and documented. It covers three primary topics: (1) process considerations and rationale, (2) approach to defining and documenting engineering processes, and (3) an IDEFO model of the process for defining engineering processes.

Method for enhanced atomization of liquids

DOEpatents

Thompson, Richard E.; White, Jerome R.

1993-01-01

In a process for atomizing a slurry or liquid process stream in which a slurry or liquid is passed through a nozzle to provide a primary atomized process stream, an improvement which comprises subjecting the liquid or slurry process stream to microwave energy as the liquid or slurry process stream exits the nozzle, wherein sufficient microwave heating is provided to flash vaporize the primary atomized process stream.

Rethinking a Negative Event: The Affective Impact of Ruminative versus Imagery-Based Processing of Aversive Autobiographical Memories.

PubMed

Slofstra, Christien; Eisma, Maarten C; Holmes, Emily A; Bockting, Claudi L H; Nauta, Maaike H

2017-01-01

Ruminative (abstract verbal) processing during recall of aversive autobiographical memories may serve to dampen their short-term affective impact. Experimental studies indeed demonstrate that verbal processing of non-autobiographical material and positive autobiographical memories evokes weaker affective responses than imagery-based processing. In the current study, we hypothesized that abstract verbal or concrete verbal processing of an aversive autobiographical memory would result in weaker affective responses than imagery-based processing. The affective impact of abstract verbal versus concrete verbal versus imagery-based processing during recall of an aversive autobiographical memory was investigated in a non-clinical sample ( n  = 99) using both an observational and an experimental design. Observationally, it was examined whether spontaneous use of processing modes (both state and trait measures) was associated with impact of aversive autobiographical memory recall on negative and positive affect. Experimentally, the causal relation between processing modes and affective impact was investigated by manipulating the processing mode during retrieval of the same aversive autobiographical memory. Main findings were that higher levels of trait (but not state) measures of both ruminative and imagery-based processing and depressive symptomatology were positively correlated with higher levels of negative affective impact in the observational part of the study. In the experimental part, no main effect of processing modes on affective impact of autobiographical memories was found. However, a significant moderating effect of depressive symptomatology was found. Only for individuals with low levels of depressive symptomatology, concrete verbal (but not abstract verbal) processing of the aversive autobiographical memory did result in weaker affective responses, compared to imagery-based processing. These results cast doubt on the hypothesis that ruminative processing of aversive autobiographical memories serves to avoid the negative emotions evoked by such memories. Furthermore, findings suggest that depressive symptomatology is associated with the spontaneous use and the affective impact of processing modes during recall of aversive autobiographical memories. Clinical studies are needed that examine the role of processing modes during aversive autobiographical memory recall in depression, including the potential effectiveness of targeting processing modes in therapy.

Active pharmaceutical ingredient (API) production involving continuous processes--a process system engineering (PSE)-assisted design framework.

PubMed

Cervera-Padrell, Albert E; Skovby, Tommy; Kiil, Søren; Gani, Rafiqul; Gernaey, Krist V

2012-10-01

A systematic framework is proposed for the design of continuous pharmaceutical manufacturing processes. Specifically, the design framework focuses on organic chemistry based, active pharmaceutical ingredient (API) synthetic processes, but could potentially be extended to biocatalytic and fermentation-based products. The method exploits the synergic combination of continuous flow technologies (e.g., microfluidic techniques) and process systems engineering (PSE) methods and tools for faster process design and increased process understanding throughout the whole drug product and process development cycle. The design framework structures the many different and challenging design problems (e.g., solvent selection, reactor design, and design of separation and purification operations), driving the user from the initial drug discovery steps--where process knowledge is very limited--toward the detailed design and analysis. Examples from the literature of PSE methods and tools applied to pharmaceutical process design and novel pharmaceutical production technologies are provided along the text, assisting in the accumulation and interpretation of process knowledge. Different criteria are suggested for the selection of batch and continuous processes so that the whole design results in low capital and operational costs as well as low environmental footprint. The design framework has been applied to the retrofit of an existing batch-wise process used by H. Lundbeck A/S to produce an API: zuclopenthixol. Some of its batch operations were successfully converted into continuous mode, obtaining higher yields that allowed a significant simplification of the whole process. The material and environmental footprint of the process--evaluated through the process mass intensity index, that is, kg of material used per kg of product--was reduced to half of its initial value, with potential for further reduction. The case-study includes reaction steps typically used by the pharmaceutical industry featuring different characteristic reaction times, as well as L-L separation and distillation-based solvent exchange steps, and thus constitutes a good example of how the design framework can be useful to efficiently design novel or already existing API manufacturing processes taking advantage of continuous processes. Copyright © 2012 Elsevier B.V. All rights reserved.

On the facilitative effects of face motion on face recognition and its development

PubMed Central

Xiao, Naiqi G.; Perrotta, Steve; Quinn, Paul C.; Wang, Zhe; Sun, Yu-Hao P.; Lee, Kang

2014-01-01

For the past century, researchers have extensively studied human face processing and its development. These studies have advanced our understanding of not only face processing, but also visual processing in general. However, most of what we know about face processing was investigated using static face images as stimuli. Therefore, an important question arises: to what extent does our understanding of static face processing generalize to face processing in real-life contexts in which faces are mostly moving? The present article addresses this question by examining recent studies on moving face processing to uncover the influence of facial movements on face processing and its development. First, we describe evidence on the facilitative effects of facial movements on face recognition and two related theoretical hypotheses: the supplementary information hypothesis and the representation enhancement hypothesis. We then highlight several recent studies suggesting that facial movements optimize face processing by activating specific face processing strategies that accommodate to task requirements. Lastly, we review the influence of facial movements on the development of face processing in the first year of life. We focus on infants' sensitivity to facial movements and explore the facilitative effects of facial movements on infants' face recognition performance. We conclude by outlining several future directions to investigate moving face processing and emphasize the importance of including dynamic aspects of facial information to further understand face processing in real-life contexts. PMID:25009517

Comparison of property between two Viking Seismic tapes

NASA Astrophysics Data System (ADS)

Yamamoto, Y.; Yamada, R.

2016-12-01

Tthe restoration work of the seismometer data onboard Viking Lander 2 is still continuing. Originally, the data were processed and archived both in MIT and UTIG separately, and each data is accessible via the Internet today. Their file formats to store the data are different, but both of them are currently readable due to the continuous investigation. However, there is some inconsistency between their data although most of their data are highly consistent. To understand the differences, the knowledge of archiving and off-line processing of spacecraft is required because these differences are caused by the off-line processing.The data processing of spacecraft often requires merge and sort processing of raw data. The merge processing is normally performed to eliminate duplicated data, and the sort processing is performed to fix data order. UTIG did not seem to perform these merge and sort processing. Therefore, the UTIG processed data remain duplication. The MIT processed data did these merge and sort processing, but the raw data sometimes include wrong time tags, and it cannot be fixed strictly after sort processing. Also, the MIT processed data has enough documents to understand metadata, while UTIG data has a brief instruction. Therefore, both of MIT and UTIG data are treated complementary. A better data set can be established using both of them. In this presentation, we would show the method to build a better data set of Viking Lander 2 seismic data.

Holistic processing, contact, and the other-race effect in face recognition.

PubMed

Zhao, Mintao; Hayward, William G; Bülthoff, Isabelle

2014-12-01

Face recognition, holistic processing, and processing of configural and featural facial information are known to be influenced by face race, with better performance for own- than other-race faces. However, whether these various other-race effects (OREs) arise from the same underlying mechanisms or from different processes remains unclear. The present study addressed this question by measuring the OREs in a set of face recognition tasks, and testing whether these OREs are correlated with each other. Participants performed different tasks probing (1) face recognition, (2) holistic processing, (3) processing of configural information, and (4) processing of featural information for both own- and other-race faces. Their contact with other-race people was also assessed with a questionnaire. The results show significant OREs in tasks testing face memory and processing of configural information, but not in tasks testing either holistic processing or processing of featural information. Importantly, there was no cross-task correlation between any of the measured OREs. Moreover, the level of other-race contact predicted only the OREs obtained in tasks testing face memory and processing of configural information. These results indicate that these various cross-race differences originate from different aspects of face processing, in contrary to the view that the ORE in face recognition is due to cross-race differences in terms of holistic processing. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Process monitoring and visualization solutions for hot-melt extrusion: a review.

PubMed

Saerens, Lien; Vervaet, Chris; Remon, Jean Paul; De Beer, Thomas

2014-02-01

Hot-melt extrusion (HME) is applied as a continuous pharmaceutical manufacturing process for the production of a variety of dosage forms and formulations. To ensure the continuity of this process, the quality of the extrudates must be assessed continuously during manufacturing. The objective of this review is to provide an overview and evaluation of the available process analytical techniques which can be applied in hot-melt extrusion. Pharmaceutical extruders are equipped with traditional (univariate) process monitoring tools, observing barrel and die temperatures, throughput, screw speed, torque, drive amperage, melt pressure and melt temperature. The relevance of several spectroscopic process analytical techniques for monitoring and control of pharmaceutical HME has been explored recently. Nevertheless, many other sensors visualizing HME and measuring diverse critical product and process parameters with potential use in pharmaceutical extrusion are available, and were thoroughly studied in polymer extrusion. The implementation of process analytical tools in HME serves two purposes: (1) improving process understanding by monitoring and visualizing the material behaviour and (2) monitoring and analysing critical product and process parameters for process control, allowing to maintain a desired process state and guaranteeing the quality of the end product. This review is the first to provide an evaluation of the process analytical tools applied for pharmaceutical HME monitoring and control, and discusses techniques that have been used in polymer extrusion having potential for monitoring and control of pharmaceutical HME. © 2013 Royal Pharmaceutical Society.

Process for improving metal production in steelmaking processes

DOEpatents

Pal, Uday B.; Gazula, Gopala K. M.; Hasham, Ali

1996-01-01

A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements.

Materials processing in space: Early experiments

NASA Technical Reports Server (NTRS)

Naumann, R. J.; Herring, H. W.

1980-01-01

The characteristics of the space environment were reviewed. Potential applications of space processing are discussed and include metallurgical processing, and processing of semiconductor materials. The behavior of fluid in low gravity is described. The evolution of apparatus for materials processing in space was reviewed.

Abhijit Dutta | NREL

Science.gov Websites

Techno-economic analysis Process model development for existing and conceptual processes Detailed heat integration Economic analysis of integrated processes Integration of process simulation learnings into control ;Conceptual Process Design and Techno-Economic Assessment of Ex Situ Catalytic Fast Pyrolysis of Biomass: A

7 CFR 52.806 - Color.

Code of Federal Regulations, 2012 CFR

2012-01-01

... PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1... cherries that vary markedly from this color due to oxidation, improper processing, or other causes, or that... to oxidation, improper processing, or other causes, or that are undercolored, does not exceed the...

7 CFR 52.806 - Color.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1... cherries that vary markedly from this color due to oxidation, improper processing, or other causes, or that... to oxidation, improper processing, or other causes, or that are undercolored, does not exceed the...

Meat Processing.

ERIC Educational Resources Information Center

Legacy, Jim; And Others

This publication provides an introduction to meat processing for adult students in vocational and technical education programs. Organized in four chapters, the booklet provides a brief overview of the meat processing industry and the techniques of meat processing and butchering. The first chapter introduces the meat processing industry and…

40 CFR 60.2025 - What if my chemical recovery unit is not listed in § 60.2020(n)?

Code of Federal Regulations, 2011 CFR

2011-07-01

... materials that are recovered. (3) A description (including a process flow diagram) of the process in which... process. (4) A description (including a process flow diagram) of the chemical constituent recovery process...

40 CFR 60.2025 - What if my chemical recovery unit is not listed in § 60.2020(n)?

Code of Federal Regulations, 2012 CFR

2012-07-01

... materials that are recovered. (3) A description (including a process flow diagram) of the process in which... process. (4) A description (including a process flow diagram) of the chemical constituent recovery process...

40 CFR 60.2025 - What if my chemical recovery unit is not listed in § 60.2020(n)?

Code of Federal Regulations, 2010 CFR

2010-07-01

... materials that are recovered. (3) A description (including a process flow diagram) of the process in which... process. (4) A description (including a process flow diagram) of the chemical constituent recovery process...

40 CFR 60.2558 - What if a chemical recovery unit is not listed in § 60.2555(n)?

Code of Federal Regulations, 2012 CFR

2012-07-01

... materials that are recovered. (3) A description (including a process flow diagram) of the process in which... process. (4) A description (including a process flow diagram) of the chemical constituent recovery process...

Integrated decontamination process for metals

DOEpatents

Snyder, Thomas S.; Whitlow, Graham A.

1991-01-01

An integrated process for decontamination of metals, particularly metals that are used in the nuclear energy industry contaminated with radioactive material. The process combines the processes of electrorefining and melt refining to purify metals that can be decontaminated using either electrorefining or melt refining processes.

Case Studies in Continuous Process Improvement

NASA Technical Reports Server (NTRS)

Mehta, A.

1997-01-01

This study focuses on improving the SMT assembly process in a low-volume, high-reliability environment with emphasis on fine pitch and BGA packages. Before a process improvement is carried out, it is important to evaluate where the process stands in terms of process capability.

Mathematical Model of Nonstationary Separation Processes Proceeding in the Cascade of Gas Centrifuges in the Process of Separation of Multicomponent Isotope Mixtures

NASA Astrophysics Data System (ADS)

Orlov, A. A.; Ushakov, A. A.; Sovach, V. P.

2017-03-01

We have developed and realized on software a mathematical model of the nonstationary separation processes proceeding in the cascades of gas centrifuges in the process of separation of multicomponent isotope mixtures. With the use of this model the parameters of the separation process of germanium isotopes have been calculated. It has been shown that the model adequately describes the nonstationary processes in the cascade and is suitable for calculating their parameters in the process of separation of multicomponent isotope mixtures.

International Best Practices for Pre-Processing and Co-Processing Municipal Solid Waste and Sewage Sludge in the Cement Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasanbeigi, Ali; Lu, Hongyou; Williams, Christopher

The purpose of this report is to describe international best practices for pre-processing and coprocessing of MSW and sewage sludge in cement plants, for the benefit of countries that wish to develop co-processing capacity. The report is divided into three main sections. Section 2 describes the fundamentals of co-processing, Section 3 describes exemplary international regulatory and institutional frameworks for co-processing, and Section 4 describes international best practices related to the technological aspects of co-processing.

Thermochemical water decomposition processes

NASA Technical Reports Server (NTRS)

Chao, R. E.

1974-01-01

Thermochemical processes which lead to the production of hydrogen and oxygen from water without the consumption of any other material have a number of advantages when compared to other processes such as water electrolysis. It is possible to operate a sequence of chemical steps with net work requirements equal to zero at temperatures well below the temperature required for water dissociation in a single step. Various types of procedures are discussed, giving attention to halide processes, reverse Deacon processes, iron oxide and carbon oxide processes, and metal and alkali metal processes. Economical questions are also considered.

Voyager image processing at the Image Processing Laboratory

NASA Astrophysics Data System (ADS)

Jepsen, P. L.; Mosher, J. A.; Yagi, G. M.; Avis, C. C.; Lorre, J. J.; Garneau, G. W.

1980-09-01

This paper discusses new digital processing techniques as applied to the Voyager Imaging Subsystem and devised to explore atmospheric dynamics, spectral variations, and the morphology of Jupiter, Saturn and their satellites. Radiometric and geometric decalibration processes, the modulation transfer function, and processes to determine and remove photometric properties of the atmosphere and surface of Jupiter and its satellites are examined. It is exhibited that selected images can be processed into 'approach at constant longitude' time lapse movies which are useful in observing atmospheric changes of Jupiter. Photographs are included to illustrate various image processing techniques.

Voyager image processing at the Image Processing Laboratory

NASA Technical Reports Server (NTRS)

Jepsen, P. L.; Mosher, J. A.; Yagi, G. M.; Avis, C. C.; Lorre, J. J.; Garneau, G. W.

1980-01-01

This paper discusses new digital processing techniques as applied to the Voyager Imaging Subsystem and devised to explore atmospheric dynamics, spectral variations, and the morphology of Jupiter, Saturn and their satellites. Radiometric and geometric decalibration processes, the modulation transfer function, and processes to determine and remove photometric properties of the atmosphere and surface of Jupiter and its satellites are examined. It is exhibited that selected images can be processed into 'approach at constant longitude' time lapse movies which are useful in observing atmospheric changes of Jupiter. Photographs are included to illustrate various image processing techniques.

A novel process control method for a TT-300 E-Beam/X-Ray system

NASA Astrophysics Data System (ADS)

Mittendorfer, Josef; Gallnböck-Wagner, Bernhard

2018-02-01

This paper presents some aspects of the process control method for a TT-300 E-Beam/X-Ray system at Mediscan, Austria. The novelty of the approach is the seamless integration of routine monitoring dosimetry with process data. This allows to calculate a parametric dose for each production unit and consequently a fine grain and holistic process performance monitoring. Process performance is documented in process control charts for the analysis of individual runs as well as historic trending of runs of specific process categories over a specified time range.

A minimally processed dietary pattern is associated with lower odds of metabolic syndrome among Lebanese adults.

PubMed

Nasreddine, Lara; Tamim, Hani; Itani, Leila; Nasrallah, Mona P; Isma'eel, Hussain; Nakhoul, Nancy F; Abou-Rizk, Joana; Naja, Farah

2018-01-01

To (i) estimate the consumption of minimally processed, processed and ultra-processed foods in a sample of Lebanese adults; (ii) explore patterns of intakes of these food groups; and (iii) investigate the association of the derived patterns with cardiometabolic risk. Cross-sectional survey. Data collection included dietary assessment using an FFQ and biochemical, anthropometric and blood pressure measurements. Food items were categorized into twenty-five groups based on the NOVA food classification. The contribution of each food group to total energy intake (TEI) was estimated. Patterns of intakes of these food groups were examined using exploratory factor analysis. Multivariate logistic regression analysis was used to evaluate the associations of derived patterns with cardiometabolic risk factors. Greater Beirut area, Lebanon. Adults ≥18 years (n 302) with no prior history of chronic diseases. Of TEI, 36·53 and 27·10 % were contributed by ultra-processed and minimally processed foods, respectively. Two dietary patterns were identified: the 'ultra-processed' and the 'minimally processed/processed'. The 'ultra-processed' consisted mainly of fast foods, snacks, meat, nuts, sweets and liquor, while the 'minimally processed/processed' consisted mostly of fruits, vegetables, legumes, breads, cheeses, sugar and fats. Participants in the highest quartile of the 'minimally processed/processed' pattern had significantly lower odds for metabolic syndrome (OR=0·18, 95 % CI 0·04, 0·77), hyperglycaemia (OR=0·25, 95 % CI 0·07, 0·98) and low HDL cholesterol (OR=0·17, 95 % CI 0·05, 0·60). The study findings may be used for the development of evidence-based interventions aimed at encouraging the consumption of minimally processed foods.

Increasing patient safety and efficiency in transfusion therapy using formal process definitions.

PubMed

Henneman, Elizabeth A; Avrunin, George S; Clarke, Lori A; Osterweil, Leon J; Andrzejewski, Chester; Merrigan, Karen; Cobleigh, Rachel; Frederick, Kimberly; Katz-Bassett, Ethan; Henneman, Philip L

2007-01-01

The administration of blood products is a common, resource-intensive, and potentially problem-prone area that may place patients at elevated risk in the clinical setting. Much of the emphasis in transfusion safety has been targeted toward quality control measures in laboratory settings where blood products are prepared for administration as well as in automation of certain laboratory processes. In contrast, the process of transfusing blood in the clinical setting (ie, at the point of care) has essentially remained unchanged over the past several decades. Many of the currently available methods for improving the quality and safety of blood transfusions in the clinical setting rely on informal process descriptions, such as flow charts and medical algorithms, to describe medical processes. These informal descriptions, although useful in presenting an overview of standard processes, can be ambiguous or incomplete. For example, they often describe only the standard process and leave out how to handle possible failures or exceptions. One alternative to these informal descriptions is to use formal process definitions, which can serve as the basis for a variety of analyses because these formal definitions offer precision in the representation of all possible ways that a process can be carried out in both standard and exceptional situations. Formal process definitions have not previously been used to describe and improve medical processes. The use of such formal definitions to prospectively identify potential error and improve the transfusion process has not previously been reported. The purpose of this article is to introduce the concept of formally defining processes and to describe how formal definitions of blood transfusion processes can be used to detect and correct transfusion process errors in ways not currently possible using existing quality improvement methods.

Chemical interaction matrix between reagents in a Purex based process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brahman, R.K.; Hennessy, W.P.; Paviet-Hartmann, P.

2008-07-01

The United States Department of Energy (DOE) is the responsible entity for the disposal of the United States excess weapons grade plutonium. DOE selected a PUREX-based process to convert plutonium to low-enriched mixed oxide fuel for use in commercial nuclear power plants. To initiate this process in the United States, a Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) is under construction and will be operated by Shaw AREVA MOX Services at the Savannah River Site. This facility will be licensed and regulated by the U.S. Nuclear Regulatory Commission (NRC). A PUREX process, similar to the one used at La Hague,more » France, will purify plutonium feedstock through solvent extraction. MFFF employs two major process operations to manufacture MOX fuel assemblies: (1) the Aqueous Polishing (AP) process to remove gallium and other impurities from plutonium feedstock and (2) the MOX fuel fabrication process (MP), which processes the oxides into pellets and manufactures the MOX fuel assemblies. The AP process consists of three major steps, dissolution, purification, and conversion, and is the center of the primary chemical processing. A study of process hazards controls has been initiated that will provide knowledge and protection against the chemical risks associated from mixing of reagents over the life time of the process. This paper presents a comprehensive chemical interaction matrix evaluation for the reagents used in the PUREX-based process. Chemical interaction matrix supplements the process conditions by providing a checklist of any potential inadvertent chemical reactions that may take place. It also identifies the chemical compatibility/incompatibility of the reagents if mixed by failure of operations or equipment within the process itself or mixed inadvertently by a technician in the laboratories. (aut0010ho.« less

Ultra-processed foods have the worst nutrient profile, yet they are the most available packaged products in a sample of New Zealand supermarkets.

PubMed

Luiten, Claire M; Steenhuis, Ingrid Hm; Eyles, Helen; Ni Mhurchu, Cliona; Waterlander, Wilma E

2016-02-01

To examine the availability of packaged food products in New Zealand supermarkets by level of industrial processing, nutrient profiling score (NPSC), price (energy, unit and serving costs) and brand variety. Secondary analysis of cross-sectional survey data on packaged supermarket food and non-alcoholic beverages. Products were classified according to level of industrial processing (minimally, culinary and ultra-processed) and their NPSC. Packaged foods available in four major supermarkets in Auckland, New Zealand. Packaged supermarket food products for the years 2011 and 2013. The majority (84% in 2011 and 83% in 2013) of packaged foods were classified as ultra-processed. A significant positive association was found between the level of industrial processing and NPSC, i.e., ultra-processed foods had a worse nutrient profile (NPSC=11.63) than culinary processed foods (NPSC=7.95), which in turn had a worse nutrient profile than minimally processed foods (NPSC=3.27), P<0.001. No clear associations were observed between the three price measures and level of processing. The study observed many variations of virtually the same product. The ten largest food manufacturers produced 35% of all packaged foods available. In New Zealand supermarkets, ultra-processed foods comprise the largest proportion of packaged foods and are less healthy than less processed foods. The lack of significant price difference between ultra- and less processed foods suggests ultra-processed foods might provide time-poor consumers with more value for money. These findings highlight the need to improve the supermarket food supply by reducing numbers of ultra-processed foods and by reformulating products to improve their nutritional profile.

Trends in consumption of ultra-processed foods and obesity in Sweden between 1960 and 2010.

PubMed

Juul, Filippa; Hemmingsson, Erik

2015-12-01

To investigate how consumption of ultra-processed foods has changed in Sweden in relation to obesity. Nationwide ecological analysis of changes in processed foods along with corresponding changes in obesity. Trends in per capita food consumption during 1960-2010 were investigated using data from the Swedish Board of Agriculture. Food items were classified as group 1 (unprocessed/minimally processed), group 2 (processed culinary ingredients) or group 3 (3·1, processed food products; and 3·2, ultra-processed products). Obesity prevalence data were pooled from the peer-reviewed literature, Statistics Sweden and the WHO Global Health Observatory. Nationwide analysis in Sweden, 1960-2010. Swedish nationals aged 18 years and older. During the study period consumption of group 1 foods (minimal processing) decreased by 2 %, while consumption of group 2 foods (processed ingredients) decreased by 34 %. Consumption of group 3·1 foods (processed food products) increased by 116 % and group 3·2 foods (ultra-processed products) increased by 142 %. Among ultra-processed products, there were particularly large increases in soda (315 %; 22 v. 92 litres/capita per annum) and snack foods such as crisps and candies (367 %; 7 v. 34 kg/capita per annum). In parallel to these changes in ultra-processed products, rates of adult obesity increased from 5 % in 1980 to over 11 % in 2010. The consumption of ultra-processed products (i.e. foods with low nutritional value but high energy density) has increased dramatically in Sweden since 1960, which mirrors the increased prevalence of obesity. Future research should clarify the potential causal role of ultra-processed products in weight gain and obesity.

Differential Phonological and Semantic Modulation of Neurophysiological Responses to Visual Word Recognition.

PubMed

Drakesmith, Mark; El-Deredy, Wael; Welbourne, Stephen

2015-01-01

Reading words for meaning relies on orthographic, phonological and semantic processing. The triangle model implicates a direct orthography-to-semantics pathway and a phonologically mediated orthography-to-semantics pathway, which interact with each other. The temporal evolution of processing in these routes is not well understood, although theoretical evidence predicts early phonological processing followed by interactive phonological and semantic processing. This study used electroencephalography-event-related potential (ERP) analysis and magnetoencephalography (MEG) source localisation to identify temporal markers and the corresponding neural generators of these processes in early (∼200 ms) and late (∼400 ms) neurophysiological responses to visual words, pseudowords and consonant strings. ERP showed an effect of phonology but not semantics in both time windows, although at ∼400 ms there was an effect of stimulus familiarity. Phonological processing at ~200 ms was localised to the left occipitotemporal cortex and the inferior frontal gyrus. At 400 ms, there was continued phonological processing in the inferior frontal gyrus and additional semantic processing in the anterior temporal cortex. There was also an area in the left temporoparietal junction which was implicated in both phonological and semantic processing. In ERP, the semantic response at ∼400 ms appeared to be masked by concurrent processes relating to familiarity, while MEG successfully differentiated these processes. The results support the prediction of early phonological processing followed by an interaction of phonological and semantic processing during word recognition. Neuroanatomical loci of these processes are consistent with previous neuropsychological and functional magnetic resonance imaging studies. The results also have implications for the classical interpretation of N400-like responses as markers for semantic processing.

Basic abnormalities in visual processing affect face processing at an early age in autism spectrum disorder.

PubMed

Vlamings, Petra Hendrika Johanna Maria; Jonkman, Lisa Marthe; van Daalen, Emma; van der Gaag, Rutger Jan; Kemner, Chantal

2010-12-15

A detailed visual processing style has been noted in autism spectrum disorder (ASD); this contributes to problems in face processing and has been directly related to abnormal processing of spatial frequencies (SFs). Little is known about the early development of face processing in ASD and the relation with abnormal SF processing. We investigated whether young ASD children show abnormalities in low spatial frequency (LSF, global) and high spatial frequency (HSF, detailed) processing and explored whether these are crucially involved in the early development of face processing. Three- to 4-year-old children with ASD (n = 22) were compared with developmentally delayed children without ASD (n = 17). Spatial frequency processing was studied by recording visual evoked potentials from visual brain areas while children passively viewed gratings (HSF/LSF). In addition, children watched face stimuli with different expressions, filtered to include only HSF or LSF. Enhanced activity in visual brain areas was found in response to HSF versus LSF information in children with ASD, in contrast to control subjects. Furthermore, facial-expression processing was also primarily driven by detail in ASD. Enhanced visual processing of detailed (HSF) information is present early in ASD and occurs for neutral (gratings), as well as for socially relevant stimuli (facial expressions). These data indicate that there is a general abnormality in visual SF processing in early ASD and are in agreement with suggestions that a fast LSF subcortical face processing route might be affected in ASD. This could suggest that abnormal visual processing is causative in the development of social problems in ASD. Copyright © 2010 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

[Contention on the theory of processing techniques of Chinese materia medica in the Ming-Qing period].

PubMed

Chen, Bin; Jia, Tianzhu

2015-03-01

On the basis of the golden stage of development of processing techniques of medicinals in the Song dynasty, the theory and techniques of processing in the Ming-Qing dynasties developed and accomplished further. The knowledge of some physicians on the processing of common medicinal, such as Radix rehmannia and Radixophiopogonis, was questioned, with new idea of processing methods put forward and argued against those insisting traditional ones, marking the progress of the art of processing. By reviewing the contention of technical theory of medicinal processing in the Ming-Qing period, useful references can be provided for the inheritance and development of the traditional art of processing medicinals.

Process Feasibility Study in Support of Silicon Material, Task 1

NASA Technical Reports Server (NTRS)

Li, K. Y.; Hansen, K. C.; Yaws, C. L.

1979-01-01

During this reporting period, major activies were devoted to process system properties, chemical engineering and economic analyses. Analyses of process system properties was continued for materials involved in the alternate processes under consideration for solar cell grade silicon. The following property data are reported for silicon tetrafluoride: critical constants, vapor pressure, heat of varporization, heat capacity, density, surface tension, viscosity, thermal conductivity, heat of formation and Gibb's free energy of formation. Chemical engineering analysis of the BCL process was continued with primary efforts being devoted to the preliminary process design. Status and progress are reported for base case conditions; process flow diagram; reaction chemistry; material and energy balances; and major process equipment design.

Technology and development requirements for advanced coal conversion systems

NASA Technical Reports Server (NTRS)

1981-01-01

A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.

The s-process in massive stars: the Shell C-burning contribution

NASA Astrophysics Data System (ADS)

Pignatari, Marco; Gallino, R.; Baldovin, C.; Wiescher, M.; Herwig, F.; Heger, A.; Heil, M.; Käppeler, F.

In massive stars the s¡ process (slow neutron capture process) is activated at different tempera- tures, during He¡ burning and during convective shell C¡ burning. At solar metallicity, the neu- tron capture process in the convective C¡ shell adds a substantial contribution to the s¡ process yields made by the previous core He¡ burning, and the final results carry the signature of both processes. With decreasing metallicity, the contribution of the C¡ burning shell to the weak s¡ process rapidly decreases, because of the effect of the primary neutron poisons. On the other hand, also the s¡ process efficiency in the He core decreases with metallicity.

Clean-up and disposal process of polluted sediments from urban rivers.

PubMed

He, P J; Shao, L M; Gu, G W; Bian, C L; Xu, C

2001-10-01

In this paper, the discussion is concentrated on the properties of the polluted sediments and the combination of clean-up and disposal process for the upper layer heavily polluted sediments with good flowability. Based on the systematic analyses of various clean-up processes, a suitable engineering process has been evaluated and recommended. The process has been applied to the river reclamation in Yangpu District of Shanghai City, China. An improved centrifuge is used for dewatering the dredged sludge, which plays an important role in the combination of clean-up and disposal process. The assessment of the engineering process shows its environmental and technical economy feasibility, which is much better than that of traditional dredging-disposal processes.

Adopting software quality measures for healthcare processes.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2009-01-01

In this study, we investigated the adoptability of software quality measures for healthcare process measurement. Quality measures of ISO/IEC 9126 are redefined from a process perspective to build a generic healthcare process quality measurement model. Case study research method is used, and the model is applied to a public hospital's Entry to Care process. After the application, weak and strong aspects of the process can be easily observed. Access audibility, fault removal, completeness of documentation, and machine utilization are weak aspects and these aspects are the candidates for process improvement. On the other hand, functional completeness, fault ratio, input validity checking, response time, and throughput time are the strong aspects of the process.

Business process modeling in healthcare.

PubMed

Ruiz, Francisco; Garcia, Felix; Calahorra, Luis; Llorente, César; Gonçalves, Luis; Daniel, Christel; Blobel, Bernd

2012-01-01

The importance of the process point of view is not restricted to a specific enterprise sector. In the field of health, as a result of the nature of the service offered, health institutions' processes are also the basis for decision making which is focused on achieving their objective of providing quality medical assistance. In this chapter the application of business process modelling - using the Business Process Modelling Notation (BPMN) standard is described. Main challenges of business process modelling in healthcare are the definition of healthcare processes, the multi-disciplinary nature of healthcare, the flexibility and variability of the activities involved in health care processes, the need of interoperability between multiple information systems, and the continuous updating of scientific knowledge in healthcare.

Survey of the US materials processing and manufacturing in space program

NASA Technical Reports Server (NTRS)

Mckannan, E. C.

1981-01-01

To promote potential commercial applications of low-g technology, the materials processing and manufacturing in space program is structured to: (1) analyze the scientific principles of gravitational effects on processes used in producing materials; (2) apply the research toward the technology used to control production process (on Earth or in space, as appropriate); and (3) establish the legal and managerial framework for commercial ventures. Presently federally funded NASA research is described as well as agreements for privately funded commercial activity, and a proposed academic participation process. The future scope of the program and related capabilities using ground based facilities, aircraft, sounding rockets, and space shuttles are discussed. Areas of interest described include crystal growth; solidification of metals and alloys; containerless processing; fluids and chemical processes (including biological separation processes); and processing extraterrestrial materials.

On the fractal characterization of Paretian Poisson processes

NASA Astrophysics Data System (ADS)

Eliazar, Iddo I.; Sokolov, Igor M.

2012-06-01

Paretian Poisson processes are Poisson processes which are defined on the positive half-line, have maximal points, and are quantified by power-law intensities. Paretian Poisson processes are elemental in statistical physics, and are the bedrock of a host of power-law statistics ranging from Pareto's law to anomalous diffusion. In this paper we establish evenness-based fractal characterizations of Paretian Poisson processes. Considering an array of socioeconomic evenness-based measures of statistical heterogeneity, we show that: amongst the realm of Poisson processes which are defined on the positive half-line, and have maximal points, Paretian Poisson processes are the unique class of 'fractal processes' exhibiting scale-invariance. The results established in this paper are diametric to previous results asserting that the scale-invariance of Poisson processes-with respect to physical randomness-based measures of statistical heterogeneity-is characterized by exponential Poissonian intensities.

Mobil process converts methanol to high-quality synthetic gasoline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, A.

1978-12-11

If production of gasoline from coal becomes commercially attractive in the United States, a process under development at the Mobil Research and Development Corp. may compete with better known coal liquefaction processes. Mobil process converts methanol to high-octane, unleaded gasoline; methanol can be produced commercially from coal. If gasoline is the desired product, the Mobil process offers strong technical and cost advantages over H-coal, Exxon donor solvent, solvent-refined coal, and Fischer--Tropsch processes. The cost analysis, contained in a report to the Dept. of Energy, concludes that the Mobil process produces more-expensive liquid products than any other liquefaction process except Fischer--Tropsch.more » But Mobil's process produces ready-to-use gasoline, while the others produce oils which require further expensive refining to yield gasoline. Disadvantages and advantages are discussed.« less

Using Waste Heat for External Processes (English/Chinese) (Fact Sheet) (in Chin3se; English)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Chinese translation of the Using Waste Heat for External Processes fact sheet. Provides suggestions on how to use waste heat in industrial applications. The temperature of exhaust gases from fuel-fired industrial processes depends mainly on the process temperature and the waste heat recovery method. Figure 1 shows the heat lost in exhaust gases at various exhaust gas temperatures and percentages of excess air. Energy from gases exhausted from higher temperature processes (primary processes) can be recovered and used for lower temperature processes (secondary processes). One example is to generate steam using waste heat boilers for the fluid heaters used inmore » petroleum crude processing. In addition, many companies install heat exchangers on the exhaust stacks of furnaces and ovens to produce hot water or to generate hot air for space heating.« less

In-situ acoustic signature monitoring in additive manufacturing processes

NASA Astrophysics Data System (ADS)

Koester, Lucas W.; Taheri, Hossein; Bigelow, Timothy A.; Bond, Leonard J.; Faierson, Eric J.

2018-04-01

Additive manufacturing is a rapidly maturing process for the production of complex metallic, ceramic, polymeric, and composite components. The processes used are numerous, and with the complex geometries involved this can make quality control and standardization of the process and inspection difficult. Acoustic emission measurements have been used previously to monitor a number of processes including machining and welding. The authors have identified acoustic signature measurement as a potential means of monitoring metal additive manufacturing processes using process noise characteristics and those discrete acoustic emission events characteristic of defect growth, including cracks and delamination. Results of acoustic monitoring for a metal additive manufacturing process (directed energy deposition) are reported. The work investigated correlations between acoustic emissions and process noise with variations in machine state and deposition parameters, and provided proof of concept data that such correlations do exist.

NPTool: Towards Scalability and Reliability of Business Process Management

NASA Astrophysics Data System (ADS)

Braghetto, Kelly Rosa; Ferreira, João Eduardo; Pu, Calton

Currently one important challenge in business process management is provide at the same time scalability and reliability of business process executions. This difficulty becomes more accentuated when the execution control assumes complex countless business processes. This work presents NavigationPlanTool (NPTool), a tool to control the execution of business processes. NPTool is supported by Navigation Plan Definition Language (NPDL), a language for business processes specification that uses process algebra as formal foundation. NPTool implements the NPDL language as a SQL extension. The main contribution of this paper is a description of the NPTool showing how the process algebra features combined with a relational database model can be used to provide a scalable and reliable control in the execution of business processes. The next steps of NPTool include reuse of control-flow patterns and support to data flow management.

A new intuitionistic fuzzy rule-based decision-making system for an operating system process scheduler.

PubMed

Butt, Muhammad Arif; Akram, Muhammad

2016-01-01

We present a new intuitionistic fuzzy rule-based decision-making system based on intuitionistic fuzzy sets for a process scheduler of a batch operating system. Our proposed intuitionistic fuzzy scheduling algorithm, inputs the nice value and burst time of all available processes in the ready queue, intuitionistically fuzzify the input values, triggers appropriate rules of our intuitionistic fuzzy inference engine and finally calculates the dynamic priority (dp) of all the processes in the ready queue. Once the dp of every process is calculated the ready queue is sorted in decreasing order of dp of every process. The process with maximum dp value is sent to the central processing unit for execution. Finally, we show complete working of our algorithm on two different data sets and give comparisons with some standard non-preemptive process schedulers.

Achieving continuous manufacturing for final dosage formation: challenges and how to meet them. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Byrn, Stephen; Futran, Maricio; Thomas, Hayden; Jayjock, Eric; Maron, Nicola; Meyer, Robert F; Myerson, Allan S; Thien, Michael P; Trout, Bernhardt L

2015-03-01

We describe the key issues and possibilities for continuous final dosage formation, otherwise known as downstream processing or drug product manufacturing. A distinction is made between heterogeneous processing and homogeneous processing, the latter of which is expected to add more value to continuous manufacturing. We also give the key motivations for moving to continuous manufacturing, some of the exciting new technologies, and the barriers to implementation of continuous manufacturing. Continuous processing of heterogeneous blends is the natural first step in converting existing batch processes to continuous. In heterogeneous processing, there are discrete particles that can segregate, versus in homogeneous processing, components are blended and homogenized such that they do not segregate. Heterogeneous processing can incorporate technologies that are closer to existing technologies, where homogeneous processing necessitates the development and incorporation of new technologies. Homogeneous processing has the greatest potential for reaping the full rewards of continuous manufacturing, but it takes long-term vision and a more significant change in process development than heterogeneous processing. Heterogeneous processing has the detriment that, as the technologies are adopted rather than developed, there is a strong tendency to incorporate correction steps, what we call below "The Rube Goldberg Problem." Thus, although heterogeneous processing will likely play a major role in the near-term transformation of heterogeneous to continuous processing, it is expected that homogeneous processing is the next step that will follow. Specific action items for industry leaders are: Form precompetitive partnerships, including industry (pharmaceutical companies and equipment manufacturers), government, and universities. These precompetitive partnerships would develop case studies of continuous manufacturing and ideally perform joint-technology development, including development of small-scale equipment and processes. Develop ways to invest internally in continuous manufacturing. How best to do this will depend on the specifics of a given organization, in particular the current development projects. Upper managers will need to energize their process developers to incorporate continuous manufacturing in at least part of their processes to gain experience and demonstrate directly the benefits. Training of continuous manufacturing technologies, organizational approaches, and regulatory approaches is a key area that industrial leaders should pursue together. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

25 CFR 42.4 - What are alternative dispute resolution processes?

Code of Federal Regulations, 2010 CFR

2010-04-01

... What are alternative dispute resolution processes? Alternative dispute resolution (ADR) processes are... action. (a) ADR processes may: (1) Include peer adjudication, mediation, and conciliation; and (2... that these practices are readily identifiable. (b) For further information on ADR processes and how to...

25 CFR 42.4 - What are alternative dispute resolution processes?

Code of Federal Regulations, 2011 CFR

2011-04-01

... What are alternative dispute resolution processes? Alternative dispute resolution (ADR) processes are... action. (a) ADR processes may: (1) Include peer adjudication, mediation, and conciliation; and (2... that these practices are readily identifiable. (b) For further information on ADR processes and how to...

Characterization of Nonhomogeneous Poisson Processes Via Moment Conditions.

DTIC Science & Technology

1986-08-01

Poisson processes play an important role in many fields. The Poisson process is one of the simplest counting processes and is a building block for...place of independent increments. This provides a somewhat different viewpoint for examining Poisson processes . In addition, new characterizations for

West Valley demonstration project: Alternative processes for solidifying the high-level wastes

NASA Astrophysics Data System (ADS)

Holton, L. K.; Larson, D. E.; Partain, W. L.; Treat, R. L.

1981-10-01

Two pretreatment approaches and several waste form processes for radioactive wastes were selected for evaluation. The two waste treatment approaches were the salt/sludge separation process and the combined waste process. Both terminal and interim waste form processes were studied.

Process for improving metal production in steelmaking processes

DOEpatents

Pal, U.B.; Gazula, G.K.M.; Hasham, A.

1996-06-18

A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements. 6 figs.

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

Enhancing Manufacturing Process Education via Computer Simulation and Visualization

ERIC Educational Resources Information Center

Manohar, Priyadarshan A.; Acharya, Sushil; Wu, Peter

2014-01-01

Industrially significant metal manufacturing processes such as melting, casting, rolling, forging, machining, and forming are multi-stage, complex processes that are labor, time, and capital intensive. Academic research develops mathematical modeling of these processes that provide a theoretical framework for understanding the process variables…

9 CFR 318.304 - Operations in the thermal processing area.

Code of Federal Regulations, 2013 CFR

2013-01-01

... factor over the specified thermal processing operation times. Temperature/time recording devices shall... minimum initial temperatures and operating procedures for thermal processing equipment, shall be posted in... available to the thermal processing system operator and the inspector. (b) Process indicators and retort...

9 CFR 318.304 - Operations in the thermal processing area.

Code of Federal Regulations, 2012 CFR

2012-01-01

... factor over the specified thermal processing operation times. Temperature/time recording devices shall... minimum initial temperatures and operating procedures for thermal processing equipment, shall be posted in... available to the thermal processing system operator and the inspector. (b) Process indicators and retort...

9 CFR 318.304 - Operations in the thermal processing area.

Code of Federal Regulations, 2014 CFR

2014-01-01

... factor over the specified thermal processing operation times. Temperature/time recording devices shall... minimum initial temperatures and operating procedures for thermal processing equipment, shall be posted in... available to the thermal processing system operator and the inspector. (b) Process indicators and retort...

9 CFR 318.304 - Operations in the thermal processing area.

Code of Federal Regulations, 2011 CFR

2011-01-01

... factor over the specified thermal processing operation times. Temperature/time recording devices shall... minimum initial temperatures and operating procedures for thermal processing equipment, shall be posted in... available to the thermal processing system operator and the inspector. (b) Process indicators and retort...

20 CFR 404.926 - Agreement in expedited appeals process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DISABILITY INSURANCE (1950- ) Determinations, Administrative Review Process, and Reopening of Determinations and Decisions Expedited Appeals Process § 404.926 Agreement in expedited appeals process. If you meet... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Agreement in expedited appeals process. 404...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

75 FR 16388 - Approval and Promulgation of Implementation Plans; Commonwealth of Kentucky: Prevention of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... ``chemical process plants'' that produce ethanol through a natural fermentation process (hereafter referred... for excluding ``chemical process plants'' that produce ethanol through a natural fermentation process... facilities that produce ethanol by natural fermentation processes. Kentucky's February 5, 2010, SIP...

Process for selecting engineering tools : applied to selecting a SysML tool.

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Spain, Mark J.; Post, Debra S.; Taylor, Jeffrey L.

2011-02-01

Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

Process of discharging charge-build up in slag steelmaking processes

DOEpatents

Pal, Uday B.; Gazula, Gopala K. M.; Hasham, Ali

1994-01-01

A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag-containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements.

40 CFR 408.170 - Applicability; description of the Alaskan mechanized salmon processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Alaskan mechanized salmon processing subcategory. 408.170 Section 408.170 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Mechanized Salmon Processing Subcategory § 408.170 Applicability; description of the Alaskan mechanized salmon processing subcategory. The provisions of this subpart are...

40 CFR 408.170 - Applicability; description of the Alaskan mechanized salmon processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Alaskan mechanized salmon processing subcategory. 408.170 Section 408.170 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Mechanized Salmon Processing Subcategory § 408.170 Applicability; description of the Alaskan mechanized salmon processing subcategory. The provisions of this subpart are...

Business Process Modeling: Perceived Benefits

NASA Astrophysics Data System (ADS)

Indulska, Marta; Green, Peter; Recker, Jan; Rosemann, Michael

The process-centered design of organizations and information systems is globally seen as an appropriate response to the increased economic pressure on organizations. At the methodological core of process-centered management is process modeling. However, business process modeling in large initiatives can be a time-consuming and costly exercise, making it potentially difficult to convince executive management of its benefits. To date, and despite substantial interest and research in the area of process modeling, the understanding of the actual benefits of process modeling in academia and practice is limited. To address this gap, this paper explores the perception of benefits derived from process modeling initiatives, as reported through a global Delphi study. The study incorporates the views of three groups of stakeholders - academics, practitioners and vendors. Our findings lead to the first identification and ranking of 19 unique benefits associated with process modeling. The study in particular found that process modeling benefits vary significantly between practitioners and academics. We argue that the variations may point to a disconnect between research projects and practical demands.

Off-target model based OPC

NASA Astrophysics Data System (ADS)

Lu, Mark; Liang, Curtis; King, Dion; Melvin, Lawrence S., III

2005-11-01

Model-based Optical Proximity correction has become an indispensable tool for achieving wafer pattern to design fidelity at current manufacturing process nodes. Most model-based OPC is performed considering the nominal process condition, with limited consideration of through process manufacturing robustness. This study examines the use of off-target process models - models that represent non-nominal process states such as would occur with a dose or focus variation - to understands and manipulate the final pattern correction to a more process robust configuration. The study will first examine and validate the process of generating an off-target model, then examine the quality of the off-target model. Once the off-target model is proven, it will be used to demonstrate methods of generating process robust corrections. The concepts are demonstrated using a 0.13 μm logic gate process. Preliminary indications show success in both off-target model production and process robust corrections. With these off-target models as tools, mask production cycle times can be reduced.

Burst of virus infection and a possibly largest epidemic threshold of non-Markovian susceptible-infected-susceptible processes on networks

NASA Astrophysics Data System (ADS)

Liu, Qiang; Van Mieghem, Piet

2018-02-01

Since a real epidemic process is not necessarily Markovian, the epidemic threshold obtained under the Markovian assumption may be not realistic. To understand general non-Markovian epidemic processes on networks, we study the Weibullian susceptible-infected-susceptible (SIS) process in which the infection process is a renewal process with a Weibull time distribution. We find that, if the infection rate exceeds 1 /ln(λ1+1 ) , where λ1 is the largest eigenvalue of the network's adjacency matrix, then the infection will persist on the network under the mean-field approximation. Thus, 1 /ln(λ1+1 ) is possibly the largest epidemic threshold for a general non-Markovian SIS process with a Poisson curing process under the mean-field approximation. Furthermore, non-Markovian SIS processes may result in a multimodal prevalence. As a byproduct, we show that a limiting Weibullian SIS process has the potential to model bursts of a synchronized infection.

How does processing affect storage in working memory tasks? Evidence for both domain-general and domain-specific effects.

PubMed

Jarrold, Christopher; Tam, Helen; Baddeley, Alan D; Harvey, Caroline E

2011-05-01

Two studies that examine whether the forgetting caused by the processing demands of working memory tasks is domain-general or domain-specific are presented. In each, separate groups of adult participants were asked to carry out either verbal or nonverbal operations on exactly the same processing materials while maintaining verbal storage items. The imposition of verbal processing tended to produce greater forgetting even though verbal processing operations took no longer to complete than did nonverbal processing operations. However, nonverbal processing did cause forgetting relative to baseline control conditions, and evidence from the timing of individuals' processing responses suggests that individuals in both processing groups slowed their responses in order to "refresh" the memoranda. Taken together the data suggest that processing has a domain-general effect on working memory performance by impeding refreshment of memoranda but can also cause effects that appear domain-specific and that result from either blocking of rehearsal or interference.

Semantic and self-referential processing of positive and negative trait adjectives in older adults

PubMed Central

Glisky, Elizabeth L.; Marquine, Maria J.

2008-01-01

The beneficial effects of self-referential processing on memory have been demonstrated in numerous experiments with younger adults but have rarely been studied in older individuals. In the present study we tested young people, younger-older adults, and older-older adults in a self-reference paradigm, and compared self-referential processing to general semantic processing. Findings indicated that older adults over the age of 75 and those with below average episodic memory function showed a decreased benefit from both semantic and self-referential processing relative to a structural baseline condition. However, these effects appeared to be confined to the shared semantic processes for the two conditions, leaving the added advantage for self-referential processing unaffected These results suggest that reference to the self engages qualitatively different processes compared to general semantic processing. These processes seem relatively impervious to age and to declining memory and executive function, suggesting that they might provide a particularly useful way for older adults to improve their memories. PMID:18608973

The time course of attentional modulation on emotional conflict processing.

PubMed

Zhou, Pingyan; Yang, Guochun; Nan, Weizhi; Liu, Xun

2016-01-01

Cognitive conflict resolution is critical to human survival in a rapidly changing environment. However, emotional conflict processing seems to be particularly important for human interactions. This study examined whether the time course of attentional modulation on emotional conflict processing was different from cognitive conflict processing during a flanker task. Results showed that emotional N200 and P300 effects, similar to colour conflict processing, appeared only during the relevant task. However, the emotional N200 effect preceded the colour N200 effect, indicating that emotional conflict can be identified earlier than cognitive conflict. Additionally, a significant emotional N100 effect revealed that emotional valence differences could be perceived during early processing based on rough aspects of input. The present data suggest that emotional conflict processing is modulated by top-down attention, similar to cognitive conflict processing (reflected by N200 and P300 effects). However, emotional conflict processing seems to have more time advantages during two different processing stages.

Seeing the forest for the trees: Networked workstations as a parallel processing computer

NASA Technical Reports Server (NTRS)

Breen, J. O.; Meleedy, D. M.

1992-01-01

Unlike traditional 'serial' processing computers in which one central processing unit performs one instruction at a time, parallel processing computers contain several processing units, thereby, performing several instructions at once. Many of today's fastest supercomputers achieve their speed by employing thousands of processing elements working in parallel. Few institutions can afford these state-of-the-art parallel processors, but many already have the makings of a modest parallel processing system. Workstations on existing high-speed networks can be harnessed as nodes in a parallel processing environment, bringing the benefits of parallel processing to many. While such a system can not rival the industry's latest machines, many common tasks can be accelerated greatly by spreading the processing burden and exploiting idle network resources. We study several aspects of this approach, from algorithms to select nodes to speed gains in specific tasks. With ever-increasing volumes of astronomical data, it becomes all the more necessary to utilize our computing resources fully.

Design and application of process control charting methodologies to gamma irradiation practices

NASA Astrophysics Data System (ADS)

Saylor, M. C.; Connaghan, J. P.; Yeadon, S. C.; Herring, C. M.; Jordan, T. M.

2002-12-01

The relationship between the contract irradiation facility and the customer has historically been based upon a "PASS/FAIL" approach with little or no quality metrics used to gage the control of the irradiation process. Application of process control charts, designed in coordination with mathematical simulation of routine radiation processing, can provide a basis for understanding irradiation events. By using tools that simulate the physical rules associated with the irradiation process, end-users can explore process-related boundaries and the effects of process changes. Consequently, the relationship between contractor and customer can evolve based on the derived knowledge. The resulting level of mutual understanding of the irradiation process and its resultant control benefits both the customer and contract operation, and provides necessary assurances to regulators. In this article we examine the complementary nature of theoretical (point kernel) and experimental (dosimetric) process evaluation, and the resulting by-product of improved understanding, communication and control generated through the implementation of effective process control charting strategies.

Launch Site Computer Simulation and its Application to Processes

NASA Technical Reports Server (NTRS)

Sham, Michael D.

1995-01-01

This paper provides an overview of computer simulation, the Lockheed developed STS Processing Model, and the application of computer simulation to a wide range of processes. The STS Processing Model is an icon driven model that uses commercial off the shelf software and a Macintosh personal computer. While it usually takes one year to process and launch 8 space shuttles, with the STS Processing Model this process is computer simulated in about 5 minutes. Facilities, orbiters, or ground support equipment can be added or deleted and the impact on launch rate, facility utilization, or other factors measured as desired. This same computer simulation technology can be used to simulate manufacturing, engineering, commercial, or business processes. The technology does not require an 'army' of software engineers to develop and operate, but instead can be used by the layman with only a minimal amount of training. Instead of making changes to a process and realizing the results after the fact, with computer simulation, changes can be made and processes perfected before they are implemented.

Is the processing of affective prosody influenced by spatial attention? an ERP study

PubMed Central

2013-01-01

Background The present study asked whether the processing of affective prosody is modulated by spatial attention. Pseudo-words with a neutral, happy, threatening, and fearful prosody were presented at two spatial positions. Participants attended to one position in order to detect infrequent targets. Emotional prosody was task irrelevant. The electro-encephalogram (EEG) was recorded to assess processing differences as a function of spatial attention and emotional valence. Results Event-related potentials (ERPs) differed as a function of emotional prosody both when attended and when unattended. While emotional prosody effects interacted with effects of spatial attention at early processing levels (< 200 ms), these effects were additive at later processing stages (> 200 ms). Conclusions Emotional prosody, therefore, seems to be partially processed outside the focus of spatial attention. Whereas at early sensory processing stages spatial attention modulates the degree of emotional voice processing as a function of emotional valence, emotional prosody is processed outside of the focus of spatial attention at later processing stages. PMID:23360491

Becoming a Lunari or Taiyo expert: learned attention to parts drives holistic processing of faces.

PubMed

Chua, Kao-Wei; Richler, Jennifer J; Gauthier, Isabel

2014-06-01

Faces are processed holistically, but the locus of holistic processing remains unclear. We created two novel races of faces (Lunaris and Taiyos) to study how experience with face parts influences holistic processing. In Experiment 1, subjects individuated Lunaris wherein the top, bottom, or both face halves contained diagnostic information. Subjects who learned to attend to face parts exhibited no holistic processing. This suggests that individuation only leads to holistic processing when the whole face is attended. In Experiment 2, subjects individuated both Lunaris and Taiyos, with diagnostic information in complementary face halves of the two races. Holistic processing was measured with composites made of either diagnostic or nondiagnostic face parts. Holistic processing was only observed for composites made from diagnostic face parts, demonstrating that holistic processing can occur for diagnostic face parts that were never seen together. These results suggest that holistic processing is an expression of learned attention to diagnostic face parts. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Applications of colored petri net and genetic algorithms to cluster tool scheduling

NASA Astrophysics Data System (ADS)

Liu, Tung-Kuan; Kuo, Chih-Jen; Hsiao, Yung-Chin; Tsai, Jinn-Tsong; Chou, Jyh-Horng

2005-12-01

In this paper, we propose a method, which uses Coloured Petri Net (CPN) and genetic algorithm (GA) to obtain an optimal deadlock-free schedule and to solve re-entrant problem for the flexible process of the cluster tool. The process of the cluster tool for producing a wafer usually can be classified into three types: 1) sequential process, 2) parallel process, and 3) sequential parallel process. But these processes are not economical enough to produce a variety of wafers in small volume. Therefore, this paper will propose the flexible process where the operations of fabricating wafers are randomly arranged to achieve the best utilization of the cluster tool. However, the flexible process may have deadlock and re-entrant problems which can be detected by CPN. On the other hand, GAs have been applied to find the optimal schedule for many types of manufacturing processes. Therefore, we successfully integrate CPN and GAs to obtain an optimal schedule with the deadlock and re-entrant problems for the flexible process of the cluster tool.

Extending BPM Environments of Your Choice with Performance Related Decision Support

NASA Astrophysics Data System (ADS)

Fritzsche, Mathias; Picht, Michael; Gilani, Wasif; Spence, Ivor; Brown, John; Kilpatrick, Peter

What-if Simulations have been identified as one solution for business performance related decision support. Such support is especially useful in cases where it can be automatically generated out of Business Process Management (BPM) Environments from the existing business process models and performance parameters monitored from the executed business process instances. Currently, some of the available BPM Environments offer basic-level performance prediction capabilities. However, these functionalities are normally too limited to be generally useful for performance related decision support at business process level. In this paper, an approach is presented which allows the non-intrusive integration of sophisticated tooling for what-if simulations, analytic performance prediction tools, process optimizations or a combination of such solutions into already existing BPM environments. The approach abstracts from process modelling techniques which enable automatic decision support spanning processes across numerous BPM Environments. For instance, this enables end-to-end decision support for composite processes modelled with the Business Process Modelling Notation (BPMN) on top of existing Enterprise Resource Planning (ERP) processes modelled with proprietary languages.

Improving the process of process modelling by the use of domain process patterns

NASA Astrophysics Data System (ADS)

Koschmider, Agnes; Reijers, Hajo A.

2015-01-01

The use of business process models has become prevalent in a wide area of enterprise applications. But while their popularity is expanding, concerns are growing with respect to their proper creation and maintenance. An obvious way to boost the efficiency of creating high-quality business process models would be to reuse relevant parts of existing models. At this point, however, limited support exists to guide process modellers towards the usage of appropriate model content. In this paper, a set of content-oriented patterns is presented, which is extracted from a large set of process models from the order management and manufacturing production domains. The patterns are derived using a newly proposed set of algorithms, which are being discussed in this paper. The authors demonstrate how such Domain Process Patterns, in combination with information on their historic usage, can support process modellers in generating new models. To support the wider dissemination and development of Domain Process Patterns within and beyond the studied domains, an accompanying website has been set up.

Visual Motion Perception and Visual Attentive Processes.

DTIC Science & Technology

1988-04-01

88-0551 Visual Motion Perception and Visual Attentive Processes George Spering , New YorkUnivesity A -cesson For DTIC TAB rant AFOSR 85-0364... Spering . HIPSt: A Unix-based image processing syslem. Computer Vision, Graphics, and Image Processing, 1984,25. 331-347. ’HIPS is the Human Information...Processing Laboratory’s Image Processing System. 1985 van Santen, Jan P. It, and George Spering . Elaborated Reichardt detectors. Journal of the Optical

Some functional limit theorems for compound Cox processes

NASA Astrophysics Data System (ADS)

Korolev, Victor Yu.; Chertok, A. V.; Korchagin, A. Yu.; Kossova, E. V.; Zeifman, Alexander I.

2016-06-01

An improved version of the functional limit theorem is proved establishing weak convergence of random walks generated by compound doubly stochastic Poisson processes (compound Cox processes) to Lévy processes in the Skorokhod space under more realistic moment conditions. As corollaries, theorems are proved on convergence of random walks with jumps having finite variances to Lévy processes with variance-mean mixed normal distributions, in particular, to stable Lévy processes.

Some functional limit theorems for compound Cox processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korolev, Victor Yu.; Institute of Informatics Problems FRC CSC RAS; Chertok, A. V.

2016-06-08

An improved version of the functional limit theorem is proved establishing weak convergence of random walks generated by compound doubly stochastic Poisson processes (compound Cox processes) to Lévy processes in the Skorokhod space under more realistic moment conditions. As corollaries, theorems are proved on convergence of random walks with jumps having finite variances to Lévy processes with variance-mean mixed normal distributions, in particular, to stable Lévy processes.

37 CFR 205.12 - Process served on the Register of Copyrights or an employee in his or her official capacity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROCESSES Service of Process § 205.12 Process served on the Register of Copyrights or an employee in his or... and mode of service. (d) The Office will accept service of process for an employee only when the legal... procedure. Service of process in this case is inadequate when made only on the General Counsel. An employee...

GOCI Level-2 Processing Improvements and Cloud Motion Analysis

NASA Technical Reports Server (NTRS)

Robinson, Wayne D.

2015-01-01

The Ocean Biology Processing Group has been working with the Korean Institute of Ocean Science and Technology (KIOST) to process geosynchronous ocean color data from the GOCI (Geostationary Ocean Color Instrument) aboard the COMS (Communications, Ocean and Meteorological Satellite). The level-2 processing program, l2gen has GOCI processing as an option. Improvements made to that processing are discussed here as well as a discussion about cloud motion effects.

CrossTalk. The Journal of Defense Software Engineering. Volume 25, Number 3

DTIC Science & Technology

2012-06-01

OMG) standard Business Process Modeling and Nota- tion ( BPMN ) [6] graphical notation. I will address each of these: identify and document steps...to a value stream map using BPMN and textual process narratives. The resulting process narratives or process metadata includes key information...objectives. Once the processes are identified we can graphically document them capturing the process using BPMN (see Figure 1). The BPMN models

Evidence for the contribution of a threshold retrieval process to semantic memory.

PubMed

Kempnich, Maria; Urquhart, Josephine A; O'Connor, Akira R; Moulin, Chris J A

2017-10-01

It is widely held that episodic retrieval can recruit two processes: a threshold context retrieval process (recollection) and a continuous signal strength process (familiarity). Conversely the processes recruited during semantic retrieval are less well specified. We developed a semantic task analogous to single-item episodic recognition to interrogate semantic recognition receiver-operating characteristics (ROCs) for a marker of a threshold retrieval process. We fitted observed ROC points to three signal detection models: two models typically used in episodic recognition (unequal variance and dual-process signal detection models) and a novel dual-process recollect-to-reject (DP-RR) signal detection model that allows a threshold recollection process to aid both target identification and lure rejection. Given the nature of most semantic questions, we anticipated the DP-RR model would best fit the semantic task data. Experiment 1 (506 participants) provided evidence for a threshold retrieval process in semantic memory, with overall best fits to the DP-RR model. Experiment 2 (316 participants) found within-subjects estimates of episodic and semantic threshold retrieval to be uncorrelated. Our findings add weight to the proposal that semantic and episodic memory are served by similar dual-process retrieval systems, though the relationship between the two threshold processes needs to be more fully elucidated.

The Processing of Somatosensory Information Shifts from an Early Parallel into a Serial Processing Mode: A Combined fMRI/MEG Study.

PubMed

Klingner, Carsten M; Brodoehl, Stefan; Huonker, Ralph; Witte, Otto W

2016-01-01

The question regarding whether somatosensory inputs are processed in parallel or in series has not been clearly answered. Several studies that have applied dynamic causal modeling (DCM) to fMRI data have arrived at seemingly divergent conclusions. However, these divergent results could be explained by the hypothesis that the processing route of somatosensory information changes with time. Specifically, we suggest that somatosensory stimuli are processed in parallel only during the early stage, whereas the processing is later dominated by serial processing. This hypothesis was revisited in the present study based on fMRI analyses of tactile stimuli and the application of DCM to magnetoencephalographic (MEG) data collected during sustained (260 ms) tactile stimulation. Bayesian model comparisons were used to infer the processing stream. We demonstrated that the favored processing stream changes over time. We found that the neural activity elicited in the first 100 ms following somatosensory stimuli is best explained by models that support a parallel processing route, whereas a serial processing route is subsequently favored. These results suggest that the secondary somatosensory area (SII) receives information regarding a new stimulus in parallel with the primary somatosensory area (SI), whereas later processing in the SII is dominated by the preprocessed input from the SI.

Selection of Sustainable Processes using Sustainability ...

EPA Pesticide Factsheets

Chemical products can be obtained by process pathways involving varying amounts and types of resources, utilities, and byproduct formation. When such competing process options such as six processes for making methanol as are considered in this study, it is necessary to identify the most sustainable option. Sustainability of a chemical process is generally evaluated with indicators that require process and chemical property data. These indicators individually reflect the impacts of the process on areas of sustainability, such as the environment or society. In order to choose among several alternative processes an overall comparative analysis is essential. Generally net profit will show the most economic process. A mixed integer optimization problem can also be solved to identify the most economic among competing processes. This method uses economic optimization and leaves aside the environmental and societal impacts. To make a decision on the most sustainable process, the method presented here rationally aggregates the sustainability indicators into a single index called sustainability footprint (De). Process flow and economic data were used to compute the indicator values. Results from sustainability footprint (De) are compared with those from solving a mixed integer optimization problem. In order to identify the rank order of importance of the indicators, a multivariate analysis is performed using partial least square variable importance in projection (PLS-VIP)

Improvement of hospital processes through business process management in Qaem Teaching Hospital: A work in progress.

PubMed

Yarmohammadian, Mohammad H; Ebrahimipour, Hossein; Doosty, Farzaneh

2014-01-01

In a world of continuously changing business environments, organizations have no option; however, to deal with such a big level of transformation in order to adjust the consequential demands. Therefore, many companies need to continually improve and review their processes to maintain their competitive advantages in an uncertain environment. Meeting these challenges requires implementing the most efficient possible business processes, geared to the needs of the industry and market segments that the organization serves globally. In the last 10 years, total quality management, business process reengineering, and business process management (BPM) have been some of the management tools applied by organizations to increase business competiveness. This paper is an original article that presents implementation of "BPM" approach in the healthcare domain that allows an organization to improve and review its critical business processes. This project was performed in "Qaem Teaching Hospital" in Mashhad city, Iran and consists of four distinct steps; (1) identify business processes, (2) document the process, (3) analyze and measure the process, and (4) improve the process. Implementing BPM in Qaem Teaching Hospital changed the nature of management by allowing the organization to avoid the complexity of disparate, soloed systems. BPM instead enabled the organization to focus on business processes at a higher level.

The Processing of Somatosensory Information Shifts from an Early Parallel into a Serial Processing Mode: A Combined fMRI/MEG Study

PubMed Central

Klingner, Carsten M.; Brodoehl, Stefan; Huonker, Ralph; Witte, Otto W.

2016-01-01

The question regarding whether somatosensory inputs are processed in parallel or in series has not been clearly answered. Several studies that have applied dynamic causal modeling (DCM) to fMRI data have arrived at seemingly divergent conclusions. However, these divergent results could be explained by the hypothesis that the processing route of somatosensory information changes with time. Specifically, we suggest that somatosensory stimuli are processed in parallel only during the early stage, whereas the processing is later dominated by serial processing. This hypothesis was revisited in the present study based on fMRI analyses of tactile stimuli and the application of DCM to magnetoencephalographic (MEG) data collected during sustained (260 ms) tactile stimulation. Bayesian model comparisons were used to infer the processing stream. We demonstrated that the favored processing stream changes over time. We found that the neural activity elicited in the first 100 ms following somatosensory stimuli is best explained by models that support a parallel processing route, whereas a serial processing route is subsequently favored. These results suggest that the secondary somatosensory area (SII) receives information regarding a new stimulus in parallel with the primary somatosensory area (SI), whereas later processing in the SII is dominated by the preprocessed input from the SI. PMID:28066197

A quality by design study applied to an industrial pharmaceutical fluid bed granulation.

PubMed

Lourenço, Vera; Lochmann, Dirk; Reich, Gabriele; Menezes, José C; Herdling, Thorsten; Schewitz, Jens

2012-06-01

The pharmaceutical industry is encouraged within Quality by Design (QbD) to apply science-based manufacturing principles to assure quality not only of new but also of existing processes. This paper presents how QbD principles can be applied to an existing industrial pharmaceutical fluid bed granulation (FBG) process. A three-step approach is presented as follows: (1) implementation of Process Analytical Technology (PAT) monitoring tools at the industrial scale process, combined with multivariate data analysis (MVDA) of process and PAT data to increase the process knowledge; (2) execution of scaled-down designed experiments at a pilot scale, with adequate PAT monitoring tools, to investigate the process response to intended changes in Critical Process Parameters (CPPs); and finally (3) the definition of a process Design Space (DS) linking CPPs to Critical to Quality Attributes (CQAs), within which product quality is ensured by design, and after scale-up enabling its use at the industrial process scale. The proposed approach was developed for an existing industrial process. Through enhanced process knowledge established a significant reduction in product CQAs, variability already within quality specifications ranges was achieved by a better choice of CPPs values. The results of such step-wise development and implementation are described. Copyright © 2012 Elsevier B.V. All rights reserved.

Potato processing scenario in India: Industrial constraints, future projections, challenges ahead and remedies - A review.

PubMed

Marwaha, R S; Pandey, S K; Kumar, Dinesh; Singh, S V; Kumar, Parveen

2010-03-01

Indian potato (Solanum tuberosum L.) processing industry has emerged fast due to economic liberalization coupled with growing urbanization, expanding market options and development of indegenous processing varieties. India's first potato processing varieties 'Kufri Chipsona-1' and 'Kufri Chipsona-2' were developed in 1998, followed by an improved processing variety 'Kufri Chipsona-3' in 2005 for the Indian plains and first chipping variety 'Kufri Himsona' for the hills. These varieties have >21% tuber dry matter content, contain low reducing sugars (<0.1% on fresh wt) and are most suitable for producing chips, French fries and dehydrated products. The availability of these varieties and standardization of storage techniques for processing potatoes at 10-12°C with sprout suppressant isopropyl N-(3-chlorophenyl) carbamate have revolutionized the processing scenario within a short span of 10 years. Currently about 4% of total potato produce is being processed in organized and unorganized sector. Potato processing industry mainly comprises 4 segments: potato chips, French fries, potato flakes/powder and other processed products. However, potato chips still continue to be the most popular processed product. The major challenge facing the industries lies in arranging round the year supply of processing varieties at reasonable price for their uninterrupted operation, besides several others which have been discussed at length and addressed with concrete solutions.

Six sigma: process of understanding the control and capability of ranitidine hydrochloride tablet.

PubMed

Chabukswar, Ar; Jagdale, Sc; Kuchekar, Bs; Joshi, Vd; Deshmukh, Gr; Kothawade, Hs; Kuckekar, Ab; Lokhande, Pd

2011-01-01

The process of understanding the control and capability (PUCC) is an iterative closed loop process for continuous improvement. It covers the DMAIC toolkit in its three phases. PUCC is an iterative approach that rotates between the three pillars of the process of understanding, process control, and process capability, with each iteration resulting in a more capable and robust process. It is rightly said that being at the top is a marathon and not a sprint. The objective of the six sigma study of Ranitidine hydrochloride tablets is to achieve perfection in tablet manufacturing by reviewing the present robust manufacturing process, to find out ways to improve and modify the process, which will yield tablets that are defect-free and will give more customer satisfaction. The application of six sigma led to an improved process capability, due to the improved sigma level of the process from 1.5 to 4, a higher yield, due to reduced variation and reduction of thick tablets, reduction in packing line stoppages, reduction in re-work by 50%, a more standardized process, with smooth flow and change in coating suspension reconstitution level (8%w/w), a huge cost reduction of approximately Rs.90 to 95 lakhs per annum, an improved overall efficiency by 30% approximately, and improved overall quality of the product.

Friction spinning - Twist phenomena and the capability of influencing them

NASA Astrophysics Data System (ADS)

Lossen, Benjamin; Homberg, Werner

2016-10-01

The friction spinning process can be allocated to the incremental forming techniques. The process consists of process elements from both metal spinning and friction welding. The selective combination of process elements from these two processes results in the integration of friction sub-processes in a spinning process. This implies self-induced heat generation with the possibility of manufacturing functionally graded parts from tube and sheets. Compared with conventional spinning processes, this in-process heat treatment permits the extension of existing forming limits and also the production of more complex geometries. Furthermore, the defined adjustment of part properties like strength, grain size/orientation and surface conditions can be achieved through the appropriate process parameter settings and consequently by setting a specific temperature profile in combination with the degree of deformation. The results presented from tube forming start with an investigation into the resulting twist phenomena in flange processing. In this way, the influence of the main parameters, such as rotation speed, feed rate, forming paths and tool friction surface, and their effects on temperature, forces and finally the twist behavior are analyzed. Following this, the significant correlations with the parameters and a new process strategy are set out in order to visualize the possibility of achieving a defined grain texture orientation.

Statistical process control: A feasibility study of the application of time-series measurement in early neurorehabilitation after acquired brain injury.

PubMed

Markovic, Gabriela; Schult, Marie-Louise; Bartfai, Aniko; Elg, Mattias

2017-01-31

Progress in early cognitive recovery after acquired brain injury is uneven and unpredictable, and thus the evaluation of rehabilitation is complex. The use of time-series measurements is susceptible to statistical change due to process variation. To evaluate the feasibility of using a time-series method, statistical process control, in early cognitive rehabilitation. Participants were 27 patients with acquired brain injury undergoing interdisciplinary rehabilitation of attention within 4 months post-injury. The outcome measure, the Paced Auditory Serial Addition Test, was analysed using statistical process control. Statistical process control identifies if and when change occurs in the process according to 3 patterns: rapid, steady or stationary performers. The statistical process control method was adjusted, in terms of constructing the baseline and the total number of measurement points, in order to measure a process in change. Statistical process control methodology is feasible for use in early cognitive rehabilitation, since it provides information about change in a process, thus enabling adjustment of the individual treatment response. Together with the results indicating discernible subgroups that respond differently to rehabilitation, statistical process control could be a valid tool in clinical decision-making. This study is a starting-point in understanding the rehabilitation process using a real-time-measurements approach.

Acid and alkaline solubilization (pH shift) process: a better approach for the utilization of fish processing waste and by-products.

PubMed

Surasani, Vijay Kumar Reddy

2018-05-22

Several technologies and methods have been developed over the years to address the environmental pollution and nutritional losses associated with the dumping of fish processing waste and low-cost fish and by-products. Despite the continuous efforts put in this field, none of the developed technologies was successful in addressing the issues due to various technical problems. To solve the problems associated with the fish processing waste and low-value fish and by-products, a process called pH shift/acid and alkaline solubilization process was developed. In this process, proteins are first solubilized using acid and alkali followed by precipitating them at their isoelectric pH to recover functional and stable protein isolates from underutilized fish species and by-products. Many studies were conducted using pH shift process to recover proteins from fish and fish by-products and found to be most successful in recovering proteins with increased yields than conventional surimi (three cycle washing) process and with good functional properties. In this paper, problems associated with conventional processing, advantages and principle of pH shift processing, effect of pH shift process on the quality and storage stability of recovered isolates, applications protein isolates, etc. are discussed in detail for better understanding.

Six Sigma: Process of Understanding the Control and Capability of Ranitidine Hydrochloride Tablet

PubMed Central

Chabukswar, AR; Jagdale, SC; Kuchekar, BS; Joshi, VD; Deshmukh, GR; Kothawade, HS; Kuckekar, AB; Lokhande, PD

2011-01-01

The process of understanding the control and capability (PUCC) is an iterative closed loop process for continuous improvement. It covers the DMAIC toolkit in its three phases. PUCC is an iterative approach that rotates between the three pillars of the process of understanding, process control, and process capability, with each iteration resulting in a more capable and robust process. It is rightly said that being at the top is a marathon and not a sprint. The objective of the six sigma study of Ranitidine hydrochloride tablets is to achieve perfection in tablet manufacturing by reviewing the present robust manufacturing process, to find out ways to improve and modify the process, which will yield tablets that are defect-free and will give more customer satisfaction. The application of six sigma led to an improved process capability, due to the improved sigma level of the process from 1.5 to 4, a higher yield, due to reduced variation and reduction of thick tablets, reduction in packing line stoppages, reduction in re-work by 50%, a more standardized process, with smooth flow and change in coating suspension reconstitution level (8%w/w), a huge cost reduction of approximately Rs.90 to 95 lakhs per annum, an improved overall efficiency by 30% approximately, and improved overall quality of the product. PMID:21607050

The consequence of spatial visual processing dysfunction caused by traumatic brain injury (TBI).

PubMed

Padula, William V; Capo-Aponte, Jose E; Padula, William V; Singman, Eric L; Jenness, Jonathan

2017-01-01

A bi-modal visual processing model is supported by research to affect dysfunction following a traumatic brain injury (TBI). TBI causes dysfunction of visual processing affecting binocularity, spatial orientation, posture and balance. Research demonstrates that prescription of prisms influence the plasticity between spatial visual processing and motor-sensory systems improving visual processing and reducing symptoms following a TBI. The rationale demonstrates that visual processing underlies the functional aspects of binocularity, balance and posture. The bi-modal visual process maintains plasticity for efficiency. Compromise causes Post Trauma Vision Syndrome (PTVS) and Visual Midline Shift Syndrome (VMSS). Rehabilitation through use of lenses, prisms and sectoral occlusion has inter-professional implications in rehabilitation affecting the plasticity of the bi-modal visual process, thereby improving binocularity, spatial orientation, posture and balance Main outcomes: This review provides an opportunity to create a new perspective of the consequences of TBI on visual processing and the symptoms that are often caused by trauma. It also serves to provide a perspective of visual processing dysfunction that has potential for developing new approaches of rehabilitation. Understanding vision as a bi-modal process facilitates a new perspective of visual processing and the potentials for rehabilitation following a concussion, brain injury or other neurological events.

Improved compliance by BPM-driven workflow automation.

PubMed

Holzmüller-Laue, Silke; Göde, Bernd; Fleischer, Heidi; Thurow, Kerstin

2014-12-01

Using methods and technologies of business process management (BPM) for the laboratory automation has important benefits (i.e., the agility of high-level automation processes, rapid interdisciplinary prototyping and implementation of laboratory tasks and procedures, and efficient real-time process documentation). A principal goal of the model-driven development is the improved transparency of processes and the alignment of process diagrams and technical code. First experiences of using the business process model and notation (BPMN) show that easy-to-read graphical process models can achieve and provide standardization of laboratory workflows. The model-based development allows one to change processes quickly and an easy adaption to changing requirements. The process models are able to host work procedures and their scheduling in compliance with predefined guidelines and policies. Finally, the process-controlled documentation of complex workflow results addresses modern laboratory needs of quality assurance. BPMN 2.0 as an automation language to control every kind of activity or subprocess is directed to complete workflows in end-to-end relationships. BPMN is applicable as a system-independent and cross-disciplinary graphical language to document all methods in laboratories (i.e., screening procedures or analytical processes). That means, with the BPM standard, a communication method of sharing process knowledge of laboratories is also available. © 2014 Society for Laboratory Automation and Screening.

Minimally processed foods are more satiating and less hyperglycemic than ultra-processed foods: a preliminary study with 98 ready-to-eat foods.

PubMed

Fardet, Anthony

2016-05-18

Beyond nutritional composition, food structure is increasingly recognized to play a role in food health potential, notably in satiety and glycemic responses. Food structure is also highly dependent on processing conditions. The hypothesis for this study is, based on a data set of 98 ready-to-eat foods, that the degree of food processing would correlate with the satiety index (SI) and glycemic response. Glycemic response was evaluated according to two indices: the glycemic index (GI) and a newly designed index, the glycemic glucose equivalent (GGE). The GGE indicates how a quantity of a certain food affects blood glucose levels by identifying the amount of food glucose that would have an effect equivalent to that of the food. Then, foods were clustered within three processing groups based on the international NOVA classification: (1) raw and minimally processed foods; (2) processed foods; and (3) ultra-processed foods. Ultra-processed foods are industrial formulations of substances extracted or derived from food and additives, typically with five or more and usually many (cheap) ingredients. The data were correlated by nonparametric Spearman's rank correlation coefficient on quantitative data. The main results show strong correlations between GGE, SI and the degree of food processing, while GI is not correlated with the degree of processing. Thus, the more food is processed, the higher the glycemic response and the lower its satiety potential. The study suggests that complex, natural, minimally and/or processed foods should be encouraged for consumption rather than highly unstructured and ultra-processed foods when choosing weakly hyperglycemic and satiating foods.

Consumption of ultra-processed foods and socioeconomic position: a cross-sectional analysis of the Brazilian Longitudinal Study of Adult Health.

PubMed

Simões, Bárbara Dos Santos; Cardoso, Letícia de Oliveira; Benseñor, Isabela Judith Martins; Schmidt, Maria Inês; Duncan, Bruce Bartholow; Luft, Vivian Cristine; Molina, Maria Del Carmen Bisi; Barreto, Sandhi Maria; Levy, Renata Bertazzi; Giatti, Luana

2018-03-05

The objective of the study was to estimate the contribution of ultra-processed foods to total caloric intake and investigate whether it differs according to socioeconomic position. We analyzed baseline data from the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil 2008-2010; N = 14.378) and data on dietary intake using a food frequency questionnaire, assigning it into three categories: unprocessed or minimally processed foods and processed culinary ingredients, processed foods, and ultra-processed foods. We measured the associations between socioeconomic position (education, per capita household income, and occupational social class) and the percentage of caloric contribution of ultra-processed foods, using generalized linear regression models adjusted for age and sex. Unprocessed or minimally processed foods and processed culinary ingredients contributed to 65.7% of the total caloric intake, followed by ultra-processed foods (22.7%). After adjustments, the percentage of caloric contribution of ultra-processed foods was 20% lower among participants with incomplete elementary school when compared to postgraduates. Compared to individuals from upper income classes, the caloric contribution of ultra-processed foods was 10%, 15% and 20% lower among the ones from the three lowest income, respectively. The caloric contribution of ultra-processed foods was also 7%, 12%, 12%, and 17% lower among participants in the lowest occupational social class compared to those from high social classes. Results suggest that the caloric contribution of ultra-processed foods is higher among individuals from high socioeconomic positions with a dose-response relationship for the associations.

Executive control over unconscious cognition: attentional sensitization of unconscious information processing

PubMed Central

Kiefer, Markus

2012-01-01

Unconscious priming is a prototypical example of an automatic process, which is initiated without deliberate intention. Classical theories of automaticity assume that such unconscious automatic processes occur in a purely bottom-up driven fashion independent of executive control mechanisms. In contrast to these classical theories, our attentional sensitization model of unconscious information processing proposes that unconscious processing is susceptible to executive control and is only elicited if the cognitive system is configured accordingly. It is assumed that unconscious processing depends on attentional amplification of task-congruent processing pathways as a function of task sets. This article provides an overview of the latest research on executive control influences on unconscious information processing. I introduce refined theories of automaticity with a particular focus on the attentional sensitization model of unconscious cognition which is specifically developed to account for various attentional influences on different types of unconscious information processing. In support of the attentional sensitization model, empirical evidence is reviewed demonstrating executive control influences on unconscious cognition in the domains of visuo-motor and semantic processing: subliminal priming depends on attentional resources, is susceptible to stimulus expectations and is influenced by action intentions and task sets. This suggests that even unconscious processing is flexible and context-dependent as a function of higher-level executive control settings. I discuss that the assumption of attentional sensitization of unconscious information processing can accommodate conflicting findings regarding the automaticity of processes in many areas of cognition and emotion. This theoretical view has the potential to stimulate future research on executive control of unconscious processing in healthy and clinical populations. PMID:22470329

Model-dependence of neutrino emissivities and neutrino luminosities of neutron stars from the direct Urca processes and the modified Urca processes

NASA Astrophysics Data System (ADS)

Yin, Peng; Fan, Xiaohua; Dong, Jianmin; Guo, Wenmei; Zuo, Wei

2017-05-01

The neutrino emissivities in β-stable neutron star matter from the direct Urca (DU) processes and the modified Urca (MU) processes have been investigated by adopting 26 Skyrme interactions. Several physical quantities related to the MU processes and the DU processes have been calculated and discussed. The model-dependence of the neutrino emissivities from the DU processes is found to stem mainly from the model-dependence of the effective mass, while the neutrino emissivities from the MU processes are determined by the competition between the effects of the symmetry energy and the effective mass. Besides, we have investigated the total neutrino luminosities of neutron stars, with the masses of 1.2 , 1.4 , 1.6 and 1.8M⊙, from the DU processes and the MU processes. The neutrino luminosity of a neutron star is found to be primarily determined by whether the electron DU process is allowed or not. As long as the electron DU process can occur, the total luminosity turns out to be 5 to 8 orders of magnitude larger as compared with the case that the DU process is forbidden, which indicates that the strongest model-dependence of the neutrino luminosity comes from that of the symmetry energy and the equation of state (EOS) of neutron star matter. In the case that the DU processes are allowed, the discrepancy of the calculated neutrino luminosity using various Skyrme interactions remains noticeable, which is essentially attributed to the model-dependence of the symmetry energy, the EOS of NS matter and the effective masses.

Executive control over unconscious cognition: attentional sensitization of unconscious information processing.

PubMed

Kiefer, Markus

2012-01-01

Unconscious priming is a prototypical example of an automatic process, which is initiated without deliberate intention. Classical theories of automaticity assume that such unconscious automatic processes occur in a purely bottom-up driven fashion independent of executive control mechanisms. In contrast to these classical theories, our attentional sensitization model of unconscious information processing proposes that unconscious processing is susceptible to executive control and is only elicited if the cognitive system is configured accordingly. It is assumed that unconscious processing depends on attentional amplification of task-congruent processing pathways as a function of task sets. This article provides an overview of the latest research on executive control influences on unconscious information processing. I introduce refined theories of automaticity with a particular focus on the attentional sensitization model of unconscious cognition which is specifically developed to account for various attentional influences on different types of unconscious information processing. In support of the attentional sensitization model, empirical evidence is reviewed demonstrating executive control influences on unconscious cognition in the domains of visuo-motor and semantic processing: subliminal priming depends on attentional resources, is susceptible to stimulus expectations and is influenced by action intentions and task sets. This suggests that even unconscious processing is flexible and context-dependent as a function of higher-level executive control settings. I discuss that the assumption of attentional sensitization of unconscious information processing can accommodate conflicting findings regarding the automaticity of processes in many areas of cognition and emotion. This theoretical view has the potential to stimulate future research on executive control of unconscious processing in healthy and clinical populations.

27 CFR 21.62 - Formula No. 35-A.

Code of Federal Regulations, 2011 CFR

2011-04-01

... vaccines. 344.Processing medicinal chemicals (including alkaloids). 349.Miscellaneous drug processing (including manufacture of pills). 358.Processing miscellaneous chemicals. 359.Processing miscellaneous...

Ultra-processed foods and the nutritional dietary profile in Brazil

PubMed Central

Louzada, Maria Laura da Costa; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Baraldi, Larissa Galastri; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean-Claude; Cannon, Geoffrey; Monteiro, Carlos Augusto

2015-01-01

OBJECTIVE To assess the impact of consuming ultra-processed foods on the nutritional dietary profile in Brazil. METHODS Cross-sectional study conducted with data from the module on individual food consumption from the 2008-2009 Pesquisa de Orçamentos Familiares (POF – Brazilian Family Budgets Survey). The sample, which represented the section of the Brazilian population aged 10 years or over, involved 32,898 individuals. Food consumption was evaluated by two 24-hour food records. The consumed food items were classified into three groups: natural or minimally processed, including culinary preparations with these foods used as a base; processed; and ultra-processed. RESULTS The average daily energy consumption per capita was 1,866 kcal, with 69.5% being provided by natural or minimally processed foods, 9.0% by processed foods and 21.5% by ultra-processed food. The nutritional profile of the fraction of ultra-processed food consumption showed higher energy density, higher overall fat content, higher saturated and trans fat, higher levels of free sugar and less fiber, protein, sodium and potassium, when compared to the fraction of consumption related to natural or minimally processed foods. Ultra-processed foods presented generally unfavorable characteristics when compared to processed foods. Greater inclusion of ultra-processed foods in the diet resulted in a general deterioration in the dietary nutritional profile. The indicators of the nutritional dietary profile of Brazilians who consumed less ultra-processed foods, with the exception of sodium, are the stratum of the population closer to international recommendations for a healthy diet. CONCLUSIONS The results from this study highlight the damage to health that is arising based on the observed trend in Brazil of replacing traditional meals, based on natural or minimally processed foods, with ultra-processed foods. These results also support the recommendation of avoiding the consumption of these kinds of foods. PMID:26176747

Ultra-processed foods and the nutritional dietary profile in Brazil.

PubMed

Costa Louzada, Maria Laura da; Martins, Ana Paula Bortoletto; Canella, Daniela Silva; Baraldi, Larissa Galastri; Levy, Renata Bertazzi; Claro, Rafael Moreira; Moubarac, Jean-Claude; Cannon, Geoffrey; Monteiro, Carlos Augusto

2015-01-01

OBJECTIVE To assess the impact of consuming ultra-processed foods on the nutritional dietary profile in Brazil. METHODS Cross-sectional study conducted with data from the module on individual food consumption from the 2008-2009 Pesquisa de Orçamentos Familiares (POF - Brazilian Family Budgets Survey). The sample, which represented the section of the Brazilian population aged 10 years or over, involved 32,898 individuals. Food consumption was evaluated by two 24-hour food records. The consumed food items were classified into three groups: natural or minimally processed, including culinary preparations with these foods used as a base; processed; and ultra-processed. RESULTS The average daily energy consumption per capita was 1,866 kcal, with 69.5% being provided by natural or minimally processed foods, 9.0% by processed foods and 21.5% by ultra-processed food. The nutritional profile of the fraction of ultra-processed food consumption showed higher energy density, higher overall fat content, higher saturated and trans fat, higher levels of free sugar and less fiber, protein, sodium and potassium, when compared to the fraction of consumption related to natural or minimally processed foods. Ultra-processed foods presented generally unfavorable characteristics when compared to processed foods. Greater inclusion of ultra-processed foods in the diet resulted in a general deterioration in the dietary nutritional profile. The indicators of the nutritional dietary profile of Brazilians who consumed less ultra-processed foods, with the exception of sodium, are the stratum of the population closer to international recommendations for a healthy diet. CONCLUSIONS The results from this study highlight the damage to health that is arising based on the observed trend in Brazil of replacing traditional meals, based on natural or minimally processed foods, with ultra-processed foods. These results also support the recommendation of avoiding the consumption of these kinds of foods.

Chemomics-based marker compounds mining and mimetic processing for exploring chemical mechanisms in traditional processing of herbal medicines, a continuous study on Rehmanniae Radix.

PubMed

Zhou, Li; Xu, Jin-Di; Zhou, Shan-Shan; Shen, Hong; Mao, Qian; Kong, Ming; Zou, Ye-Ting; Xu, Ya-Yun; Xu, Jun; Li, Song-Lin

2017-12-29

Exploring processing chemistry, in particular the chemical transformation mechanisms involved, is a key step to elucidate the scientific basis in traditional processing of herbal medicines. Previously, taking Rehmanniae Radix (RR) as a case study, the holistic chemome (secondary metabolome and glycome) difference between raw and processed RR was revealed by integrating hyphenated chromatographic techniques-based targeted glycomics and untargeted metabolomics. Nevertheless, the complex chemical transformation mechanisms underpinning the holistic chemome variation in RR processing remain to be extensively clarified. As a continuous study, here a novel strategy by combining chemomics-based marker compounds mining and mimetic processing is proposed for further exploring the chemical mechanisms involved in herbal processing. First, the differential marker compounds between raw and processed herbs were rapidly discovered by untargeted chemomics-based mining approach through multivariate statistical analysis of the chemome data obtained by integrated metabolomics and glycomics analysis. Second, the marker compounds were mimetically processed under the simulated physicochemical conditions as in the herb processing, and the final reaction products were chemically characterized by targeted chemomics-based mining approach. Third, the main chemical transformation mechanisms involved were clarified by linking up the original marker compounds and their mimetic processing products. Using this strategy, a set of differential marker compounds including saccharides, glycosides and furfurals in raw and processed RR was rapidly found, and the major chemical mechanisms involved in RR processing were elucidated as stepwise transformations of saccharides (polysaccharides, oligosaccharides and monosaccharides) and glycosides (iridoid glycosides and phenethylalcohol glycosides) into furfurals (glycosylated/non-glycosylated hydroxymethylfurfurals) by deglycosylation and/or dehydration. The research deliverables indicated that the proposed strategy could advance the understanding of RR processing chemistry, and therefore may be considered a promising approach for delving into the scientific basis in traditional processing of herbal medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

MOPEX: a software package for astronomical image processing and visualization

NASA Astrophysics Data System (ADS)

Makovoz, David; Roby, Trey; Khan, Iffat; Booth, Hartley

2006-06-01

We present MOPEX - a software package for astronomical image processing and display. The package is a combination of command-line driven image processing software written in C/C++ with a Java-based GUI. The main image processing capabilities include creating mosaic images, image registration, background matching, point source extraction, as well as a number of minor image processing tasks. The combination of the image processing and display capabilities allows for much more intuitive and efficient way of performing image processing. The GUI allows for the control over the image processing and display to be closely intertwined. Parameter setting, validation, and specific processing options are entered by the user through a set of intuitive dialog boxes. Visualization feeds back into further processing by providing a prompt feedback of the processing results. The GUI also allows for further analysis by accessing and displaying data from existing image and catalog servers using a virtual observatory approach. Even though originally designed for the Spitzer Space Telescope mission, a lot of functionalities are of general usefulness and can be used for working with existing astronomical data and for new missions. The software used in the package has undergone intensive testing and benefited greatly from effective software reuse. The visualization part has been used for observation planning for both the Spitzer and Herschel Space Telescopes as part the tool Spot. The visualization capabilities of Spot have been enhanced and integrated with the image processing functionality of the command-line driven MOPEX. The image processing software is used in the Spitzer automated pipeline processing, which has been in operation for nearly 3 years. The image processing capabilities have also been tested in off-line processing by numerous astronomers at various institutions around the world. The package is multi-platform and includes automatic update capabilities. The software package has been developed by a small group of software developers and scientists at the Spitzer Science Center. It is available for distribution at the Spitzer Science Center web page.

Process simulation of modified dry grind ethanol plant with recycle of pretreated and enzymatically hydrolyzed distillers' grains.

PubMed

Kim, Youngmi; Mosier, Nathan; Ladisch, Michael R

2008-08-01

Distillers' grains (DG), a co-product of a dry grind ethanol process, is an excellent source of supplemental proteins in livestock feed. Studies have shown that, due to its high polymeric sugar contents and ease of hydrolysis, the distillers' grains have potential as an additional source of fermentable sugars for ethanol fermentation. The benefit of processing the distillers' grains to extract fermentable sugars lies in an increased ethanol yield without significant modification in the current dry grind technology. Three different potential configurations of process alternatives in which pretreated and hydrolyzed distillers' grains are recycled for an enhanced overall ethanol yield are proposed and discussed in this paper based on the liquid hot water (LHW) pretreatment of distillers' grains. Possible limitations of each proposed process are also discussed. This paper presents a compositional analysis of distillers' grains, as well as a simulation of the modified dry grind processes with recycle of distillers' grains. Simulated material balances for the modified dry grind processes are established based on the base case assumptions. These balances are compared to the conventional dry grind process in terms of ethanol yield, compositions of its co-products, and accumulation of fermentation inhibitors. Results show that 14% higher ethanol yield is achievable by processing and hydrolyzing the distillers' grains for additional fermentable sugars, as compared to the conventional dry grind process. Accumulation of fermentation by-products and inhibitory components in the proposed process is predicted to be 2-5 times higher than in the conventional dry grind process. The impact of fermentation inhibitors is reviewed and discussed. The final eDDGS (enhanced dried distillers' grains) from the modified processes has 30-40% greater protein content per mass than DDGS, and its potential as a value-added process is also analyzed. While the case studies used to illustrate the process simulation are based on LHW pretreated DG, the process simulation itself provides a framework for evaluation of the impact of other pretreatments.

Ultra-processed food products and obesity in Brazilian households (2008-2009).

PubMed

Canella, Daniela Silva; Levy, Renata Bertazzi; Martins, Ana Paula Bortoletto; Claro, Rafael Moreira; Moubarac, Jean-Claude; Baraldi, Larissa Galastri; Cannon, Geoffrey; Monteiro, Carlos Augusto

2014-01-01

Production and consumption of industrially processed food and drink products have risen in parallel with the global increase in overweight and obesity and related chronic non-communicable diseases. The objective of this study was to analyze the relationship between household availability of processed and ultra-processed products and the prevalence of excess weight (overweight plus obesity) and obesity in Brazil. The study was based on data from the 2008-2009 Household Budget Survey involving a probabilistic sample of 55,970 Brazilian households. The units of study were household aggregates (strata), geographically and socioeconomically homogeneous. Multiple linear regression models were used to assess the relationship between the availability of processed and ultra-processed products and the average of Body Mass Index (BMI) and the percentage of individuals with excess weight and obesity in the strata, controlling for potential confounders (socio-demographic characteristics, percentage of expenditure on eating out of home, and dietary energy other than that provided by processed and ultra-processed products). Predictive values for prevalence of excess weight and obesity were estimated according to quartiles of the household availability of dietary energy from processed and ultra-processed products. The mean contribution of processed and ultra-processed products to total dietary energy availability ranged from 15.4% (lower quartile) to 39.4% (upper quartile). Adjusted linear regression coefficients indicated that household availability of ultra-processed products was positively associated with both the average BMI and the prevalence of excess weight and obesity, whereas processed products were not associated with these outcomes. In addition, people in the upper quartile of household consumption of ultra-processed products, compared with those in the lower quartile, were 37% more likely to be obese. Greater household availability of ultra-processed food products in Brazil is positively and independently associated with higher prevalence of excess weight and obesity in all age groups in this cross-sectional study.

Ultra-Processed Food Products and Obesity in Brazilian Households (2008–2009)

PubMed Central

Canella, Daniela Silva; Levy, Renata Bertazzi; Martins, Ana Paula Bortoletto; Claro, Rafael Moreira; Moubarac, Jean-Claude; Baraldi, Larissa Galastri; Cannon, Geoffrey; Monteiro, Carlos Augusto

2014-01-01

Background Production and consumption of industrially processed food and drink products have risen in parallel with the global increase in overweight and obesity and related chronic non-communicable diseases. The objective of this study was to analyze the relationship between household availability of processed and ultra-processed products and the prevalence of excess weight (overweight plus obesity) and obesity in Brazil. Methods The study was based on data from the 2008–2009 Household Budget Survey involving a probabilistic sample of 55,970 Brazilian households. The units of study were household aggregates (strata), geographically and socioeconomically homogeneous. Multiple linear regression models were used to assess the relationship between the availability of processed and ultra-processed products and the average of Body Mass Index (BMI) and the percentage of individuals with excess weight and obesity in the strata, controlling for potential confounders (socio-demographic characteristics, percentage of expenditure on eating out of home, and dietary energy other than that provided by processed and ultra-processed products). Predictive values for prevalence of excess weight and obesity were estimated according to quartiles of the household availability of dietary energy from processed and ultra-processed products. Results The mean contribution of processed and ultra-processed products to total dietary energy availability ranged from 15.4% (lower quartile) to 39.4% (upper quartile). Adjusted linear regression coefficients indicated that household availability of ultra-processed products was positively associated with both the average BMI and the prevalence of excess weight and obesity, whereas processed products were not associated with these outcomes. In addition, people in the upper quartile of household consumption of ultra-processed products, compared with those in the lower quartile, were 37% more likely to be obese. Conclusion Greater household availability of ultra-processed food products in Brazil is positively and independently associated with higher prevalence of excess weight and obesity in all age groups in this cross-sectional study. PMID:24667658

Implementation of Integrated System Fault Management Capability

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Schmalzel, John; Morris, Jon; Smith, Harvey; Turowski, Mark

2008-01-01

Fault Management to support rocket engine test mission with highly reliable and accurate measurements; while improving availability and lifecycle costs. CORE ELEMENTS: Architecture, taxonomy, and ontology (ATO) for DIaK management. Intelligent Sensor Processes; Intelligent Element Processes; Intelligent Controllers; Intelligent Subsystem Processes; Intelligent System Processes; Intelligent Component Processes.