Engineering Design Handbook. Joining of Advanced Composites

DTIC Science & Technology

1979-03-01

4.50 " Traversing Mechanisms.. .. . .. .. .. . .. .. .. .. .. .. . .. . .. . .. .. . $ 4.50 Wheeled Amphibians...o < ., ~ tO .... ., ;> < 0 DENOTES 1-IN. SCARF b. DENOTES 1-1/2-IN. SCARF CLOSED SYMBOL DENOTES RUNOUT 2.0 ~-----------L...PATTERN 0 DENOTES 2-IN. LAP, 0/45/-45/0 PATTERN b. DENOTES 2-IN. LAP, 45/0/0/-45 PATTERN CLOSED SYMBOL DENOTES RUNOUT b.----•:. • 0

Producing Quantum Dots by Spray Pyrolysis

NASA Technical Reports Server (NTRS)

Banger, Kulbinder; Jin, Michael H.; Hepp, Aloysius

2006-01-01

An improved process for making nanocrystallites, commonly denoted quantum dots (QDs), is based on spray pyrolysis. Unlike the process used heretofore, the improved process is amenable to mass production of either passivated or non-passivated QDs, with computer control to ensure near uniformity of size.

The Process Communication Model: Understanding Ourselves and Others.

ERIC Educational Resources Information Center

Gilbert, Michael

1996-01-01

The Process Communication Model is based on personality types (reactors, persisters, workaholics, dreamers, rebels, and promoters) denoting different sets of behaviors, perceptions, and motivators that influence individual learning and teaching styles. The model is comprehensive and process-oriented, covering interaction styles, communication…

Adsorption of malachite green by magnetic litchi pericarps: A response surface methodology investigation.

PubMed

Zheng, Hao; Qi, Jinqiu; Jiang, Ruixue; Gao, Yan; Li, Xiaochen

2015-10-01

In this work, we synthesized a novel magnetic adsorbent containing litchi pericarps, denoted as MLP, for the removal of malachite green (MG) from solution. The factors influencing MG adsorption, such as contact time, adsorbent dosage, and initial dye concentration, were optimized using the Box-Behnken response surface methodology (RSM). The adsorption isotherms as well as the kinetics and thermodynamics of the adsorption of MG onto MLP are discussed. The results showed that MLP has a maximum adsorption efficiency of 99.5% when the temperature, pH, contact time, adsorbent dosage, and initial MG concentration were optimally set as 25 °C, 6.0, 66.69 min, 5.14 g/L, and 150 mg/L, respectively. The best model to describe this process is the Langmuir isotherm, with the maximum adsorption capacity being 70.42 mg/g. In addition, the kinetics of MG adsorption onto MLP followed a pseudo-second-order model; moreover, thermodynamic analysis suggested that MG adsorption onto MLP is spontaneous and endothermic. Finally, it was found that the new magnetic adsorbent can be separated easily and rapidly from mixed solutions in the presence of an external magnetic field. Copyright © 2015 Elsevier Ltd. All rights reserved.

Spatial representations elicit dual-coding effects in mental imagery.

PubMed

Verges, Michelle; Duffy, Sean

2009-08-01

Spatial aspects of words are associated with their canonical locations in the real world. Yet little research has tested whether spatial associations denoted in language comprehension generalize to their corresponding images. We directly tested the spatial aspects of mental imagery in picture and word processing (Experiment 1). We also tested whether spatial representations of motion words produce similar perceptual-interference effects as demonstrated by object words (Experiment 2). Findings revealed that words denoting an upward spatial location produced slower responses to targets appearing at the top of the display, whereas words denoting a downward spatial location produced slower responses to targets appearing at the bottom of the display. Perceptual-interference effects did not obtain for pictures or for words lacking a spatial relation. These findings provide greater empirical support for the perceptual-symbols system theory (Barsalou, 1999, 2008). Copyright © 2009 Cognitive Science Society, Inc.

Gas chemical adsorption characterization of lanthanide hexafluoroacetylacetonates

DOE PAGES

Stratz, S. Adam; Jones, Steven J.; Mullen, Austin D.; ...

2017-03-21

Newly-established adsorption enthalpy and entropy values of 12 lanthanide hexafluoroacetylacetonates, denoted Ln[hfac] 4, along with the experimental and theoretical methodology used to obtain these values, are presented for the first time. The results of this work can be used in conjunction with theoretical modeling techniques to optimize a large-scale gas-phase separation experiment using isothermal chromatography. The results to date indicate average adsorption enthalpy and entropy values of the 12 Ln[hfac] 4 complexes ranging from -33 to -139 kJ/mol K and -299 to -557 J/mol, respectively.

Sandwork

ERIC Educational Resources Information Center

Mechling, Jay

2016-01-01

For Sigmund Freud, the terms "dreamwork" and "jokework" denoted the process by which the mind displaces social and psychological anxieties and permits them to emerge disguised in dreams and jokes. This article posits a similar process for "sandwork." Examining the ways people play with sand in its three basic…

Simplified bipartite concepts of functioning and disability recommended for interdisciplinary use of the ICF.

PubMed

Thyberg, Mikael; Arvidsson, Patrik; Thyberg, Ingrid; Nordenfelt, Lennart

2015-01-01

To argue for and propose bipartite concepts of functioning and disability, to tally with the structure of the ICF classification list, concepts of social models and clinical needs. The ICF concepts are discussed in relation to the history of ideas regarding disability concepts and the needs for such concepts in interdisciplinary rehabilitation. Bipartite concepts are presented; they refer to actual functioning, simply body functions/structures and participation, including functioning in standardized environments. Participation refers to actually performed "activities", with "activities" simply denoting things that people may do. Bipartite concepts are congruent with the ICF classification and the structure of social models of disability, suitable for clinical and interdisciplinary use and easy to understand. The issue of standardized environments represents a methodological issue rather than the conceptual issue of defining functioning and disability. An individual perspective on activity and activity limitations, i.e. the middle part of the tripartite ICF concept, is somewhat similar to concepts of traditional language that were regarded as too generalizing already in 1912, when the interactional concept of "disability in a social sense" was introduced in rehabilitation practices. Bipartite concepts of functioning and disability are recommended for interdisciplinary use of the ICF. The ICF classification is useful, but the ICF concept of activities in an individual perspective is confusing. We suggest a use of the term "activities" simply to denote things that people may do and "participation" to denote actually performed activities. Estimations of ability should be explicit about how they are related to environmental factors.

Modeling of heat and mass transfer processes for the gap-lyophilization system using the mannitol-trehalose-NaCl formulation.

PubMed

Kuu, Wei Y; Doty, Mark J; Nisipeanu, Eugen; Rebbeck, Christine L; Cho, Yong K; Smit, Mark H

2014-09-01

Gap freezing (GF) is a new concept that was developed to reduce the primary drying time using an alternative freezing process. The purpose of this investigation was to determine the gap-tray heat transfer coefficient, Kgtr , and to investigate the effect of gap lyophilization on cycle reduction of a mannitol-trehalose-NaCl (MTN) formulation. The values of Kgtr were measured using the product temperature profiles in three different configurations: (1) shelf freezing followed by shelf drying (denoted as SF-SD), (2) GF followed by SD (denoted as GF-SD), and (3) GF followed by gap drying (denoted as GF-GD). For the lyophilization cycle using shelf drying (SF-SD), 80% of the heat transferred during primary drying was from the bottom shelf to the vial, versus 20% via radiation from the top shelf. For the lyophilization cycle using gap drying (GF-GD), only 37% of the heat transferred during primary drying was from the bottom shelf to the vial versus 63% via radiation from the top shelf. Furthermore, GF in conjunction with annealing significantly reduces the dry layer resistance of the MTN formulation, which is the opposite of what was observed with a conventional freezing cycle. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

A non-linear dimension reduction methodology for generating data-driven stochastic input models

NASA Astrophysics Data System (ADS)

Ganapathysubramanian, Baskar; Zabaras, Nicholas

2008-06-01

Stochastic analysis of random heterogeneous media (polycrystalline materials, porous media, functionally graded materials) provides information of significance only if realistic input models of the topology and property variations are used. This paper proposes a framework to construct such input stochastic models for the topology and thermal diffusivity variations in heterogeneous media using a data-driven strategy. Given a set of microstructure realizations (input samples) generated from given statistical information about the medium topology, the framework constructs a reduced-order stochastic representation of the thermal diffusivity. This problem of constructing a low-dimensional stochastic representation of property variations is analogous to the problem of manifold learning and parametric fitting of hyper-surfaces encountered in image processing and psychology. Denote by M the set of microstructures that satisfy the given experimental statistics. A non-linear dimension reduction strategy is utilized to map M to a low-dimensional region, A. We first show that M is a compact manifold embedded in a high-dimensional input space Rn. An isometric mapping F from M to a low-dimensional, compact, connected set A⊂Rd(d≪n) is constructed. Given only a finite set of samples of the data, the methodology uses arguments from graph theory and differential geometry to construct the isometric transformation F:M→A. Asymptotic convergence of the representation of M by A is shown. This mapping F serves as an accurate, low-dimensional, data-driven representation of the property variations. The reduced-order model of the material topology and thermal diffusivity variations is subsequently used as an input in the solution of stochastic partial differential equations that describe the evolution of dependant variables. A sparse grid collocation strategy (Smolyak algorithm) is utilized to solve these stochastic equations efficiently. We showcase the methodology by constructing low-dimensional input stochastic models to represent thermal diffusivity in two-phase microstructures. This model is used in analyzing the effect of topological variations of two-phase microstructures on the evolution of temperature in heat conduction processes.

To Event: Toward a Post-Constructivist of Theorizing and Researching the Living Curriculum as Event-in-the-Making

ERIC Educational Resources Information Center

Roth, Wolff-Michael

2013-01-01

In this article, I (1) argue for approaching processes, events-in-the-making, by means of process categories--to learn, to teach--not by means of categories that denote differences in state and (2) exemplify doing and writing research consistent with process philosophy. To understand process we must not think, research, and write them in terms of…

Film/Adhesive Processing Module for Fiber-Placement Processing of Composites

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce

2007-01-01

An automated apparatus has been designed and constructed that enables the automated lay-up of composite structures incorporating films, foils, and adhesives during the automated fiber-placement process. This apparatus, denoted a film module, could be used to deposit materials in film or thin sheet form either simultaneously when laying down the fiber composite article or in an independent step.

Defining Business Communication Using the Movie "The Insider" as Mediator of Students' Thought Processes.

ERIC Educational Resources Information Center

Rodriguez-Talavera, Leticia

Business communication is different from other domains in that its contextual meaning requires previous metacognitive mediation of signs. The communicative process in business is aimed at accomplishing a specific outcome. Various forms of meaning come into play in business communication such as denotative, connotative, stylistic, affective,…

EOS MLS Level 1B Data Processing, Version 2.2

NASA Technical Reports Server (NTRS)

Perun, Vincent; Jarnot, Robert; Pickett, Herbert; Cofield, Richard; Schwartz, Michael; Wagner, Paul

2009-01-01

A computer program performs level- 1B processing (the term 1B is explained below) of data from observations of the limb of the Earth by the Earth Observing System (EOS) Microwave Limb Sounder (MLS), which is an instrument aboard the Aura spacecraft. This software accepts, as input, the raw EOS MLS scientific and engineering data and the Aura spacecraft ephemeris and attitude data. Its output consists of calibrated instrument radiances and associated engineering and diagnostic data. [This software is one of several computer programs, denoted product generation executives (PGEs), for processing EOS MLS data. Starting from level 0 (representing the aforementioned raw data, the PGEs and their data products are denoted by alphanumeric labels (e.g., 1B and 2) that signify the successive stages of processing.] At the time of this reporting, this software is at version 2.2 and incorporates improvements over a prior version that make the code more robust, improve calibration, provide more diagnostic outputs, improve the interface with the Level 2 PGE, and effect a 15-percent reduction in file sizes by use of data compression.

Automated Analysis of Stateflow Models

NASA Technical Reports Server (NTRS)

Bourbouh, Hamza; Garoche, Pierre-Loic; Garion, Christophe; Gurfinkel, Arie; Kahsaia, Temesghen; Thirioux, Xavier

2017-01-01

Stateflow is a widely used modeling framework for embedded and cyber physical systems where control software interacts with physical processes. In this work, we present a framework a fully automated safety verification technique for Stateflow models. Our approach is two-folded: (i) we faithfully compile Stateflow models into hierarchical state machines, and (ii) we use automated logic-based verification engine to decide the validity of safety properties. The starting point of our approach is a denotational semantics of State flow. We propose a compilation process using continuation-passing style (CPS) denotational semantics. Our compilation technique preserves the structural and modal behavior of the system. The overall approach is implemented as an open source toolbox that can be integrated into the existing Mathworks Simulink Stateflow modeling framework. We present preliminary experimental evaluations that illustrate the effectiveness of our approach in code generation and safety verification of industrial scale Stateflow models.

Modelling insights on the partition of evapotranspiration components across biomes

NASA Astrophysics Data System (ADS)

Fatichi, Simone; Pappas, Christoforos

2017-04-01

Recent studies using various methodologies have found a large variability (from 35 to 90%) in the ratio of transpiration to total evapotranspiration (denoted as T:ET) across biomes or even at the global scale. Concurrently, previous results suggest that T:ET is independent of mean precipitation and has a positive correlation with Leaf Area Index (LAI). We used the mechanistic ecohydrological model, T&C, with a refined process-based description of soil resistance and a detailed treatment of canopy biophysics and ecophysiology, to investigate T:ET across multiple biomes. Contrary to observation-based estimates, simulation results highlight a well-constrained range of mean T:ET across biomes that is also robust to perturbations of the most sensitive parameters. Simulated T:ET was confirmed to be independent of average precipitation, while it was found to be uncorrelated with LAI across biomes. Higher values of LAI increase evaporation from interception but suppress ground evaporation with the two effects largely cancelling each other in many sites. These results offer mechanistic, model-based, evidence to the ongoing research about the range of T:ET and the factors affecting its magnitude across biomes.

Shape recognition contributions to figure-ground reversal: which route counts?

PubMed

Peterson, M A; Harvey, E M; Weidenbacher, H J

1991-11-01

Observers viewed upright and inverted versions of figure-ground stimuli, in which Gestalt variables specified that the center was figure. In upright versions, the surround was high in denotivity, in that most viewers agreed it depicted the same shape; in inverted versions, the surround was low in denotivity. The surround was maintained as figure longer and was more likely to be obtained as figure when the stimuli were upright rather than inverted. In four experiments, these effects reflected inputs to figure-ground computations from orientation-specific shape representations only. To account for these findings, a nonratiomorphic mechanism is proposed that enables shape recognition processes before figure-ground relationships are determined.

Facile synthesis of upconversion nanoparticles with high purity using lanthanide oleate compounds

NASA Astrophysics Data System (ADS)

Kang, Ning; Ai, Chao-Chao; Zhou, Ya-Ming; Wang, Zuo; Ren, Lei

2018-02-01

A novel strategy for preparing highly pure NaYF4-based upconversion nanoparticles (UCNPs) was developed using lanthanide oleate compounds [Ln(OA)3] as the precursor, denoted as the Ln-OA preparation method. Compared to the conventional solvothermal method for synthesizing UCNPs using lanthanide chloride compounds (LnCl3) as the precursor (denoted as the Ln-Cl method), the Ln-OA strategy exhibited the merits of high purity, reduced purification process and a uniform size in preparing core and core-shell UCNPs excited by a 980 or 808 nm near infrared (NIR) laser. This work sheds new insight on the preparation of UCNPs and promotes their application in biomedical fields.

Brady's Geothermal Field - Map of DAS, Nodal, Vibroseis and Reftek Station Deployment

DOE Data Explorer

Kurt Feigl

2016-10-15

Map of DAS, nodal, vibroseis and Reftek stations during March 2016 deployment. The plot on the left has nodal stations labeled; the plot on the right has vibroseis observations labeled. Stations are shown in map-view using Brady's rotated X-Y coordinates with side plots denoting elevation with respect to the WGS84 ellipsoid. Blue circles denote vibroseis data, x symbols denote DAS (cyan for horizontal and magenta for vertical), black asterisks denote Reftek data, and red plus signs denote nodal data. This map can be found on UW-Madison's askja server at /PoroTomo/DATA/MAPS/Deployment_Stations.pdf

Anaerobic Digestion in a Flooded Densified Leachbed

NASA Technical Reports Server (NTRS)

Chynoweth, David P.; Teixeira, Arthur A.; Owens, John M.; Haley, Patrick J.

2009-01-01

A document discusses the adaptation of a patented biomass-digesting process, denoted sequential batch anaerobic composting (SEBAC), to recycling of wastes aboard a spacecraft. In SEBAC, high-solids-content biomass wastes are converted into methane, carbon dioxide, and compost.

Finding-specific display presets for computed radiography soft-copy reading.

PubMed

Andriole, K P; Gould, R G; Webb, W R

1999-05-01

Much work has been done to optimize the display of cross-sectional modality imaging examinations for soft-copy reading (i.e., window/level tissue presets, and format presentations such as tile and stack modes, four-on-one, nine-on-one, etc). Less attention has been paid to the display of digital forms of the conventional projection x-ray. The purpose of this study is to assess the utility of providing presets for computed radiography (CR) soft-copy display, based not on the window/level settings, but on processing applied to the image optimized for visualization of specific findings, pathologies, etc (i.e., pneumothorax, tumor, tube location). It is felt that digital display of CR images based on finding-specific processing presets has the potential to: speed reading of digital projection x-ray examinations on soft copy; improve diagnostic efficacy; standardize display across examination type, clinical scenario, important key findings, and significant negatives; facilitate image comparison; and improve confidence in and acceptance of soft-copy reading. Clinical chest images are acquired using an Agfa-Gevaert (Mortsel, Belgium) ADC 70 CR scanner and Fuji (Stamford, CT) 9000 and AC2 CR scanners. Those demonstrating pertinent findings are transferred over the clinical picture archiving and communications system (PACS) network to a research image processing station (Agfa PS5000), where the optimal image-processing settings per finding, pathologic category, etc, are developed in conjunction with a thoracic radiologist, by manipulating the multiscale image contrast amplification (Agfa MUSICA) algorithm parameters. Soft-copy display of images processed with finding-specific settings are compared with the standard default image presentation for 50 cases of each category. Comparison is scored using a 5-point scale with the positive scale denoting the standard presentation is preferred over the finding-specific processing, the negative scale denoting the finding-specific processing is preferred over the standard presentation, and zero denoting no difference. Processing settings have been developed for several findings including pneumothorax and lung nodules, and clinical cases are currently being collected in preparation for formal clinical trials. Preliminary results indicate a preference for the optimized-processing presentation of images over the standard default, particularly by inexperienced radiology residents and referring clinicians.

Evaluative judgments are based on evaluative information: Evidence against meaning change in evaluative context effects.

PubMed

Kaplan, M F

1975-07-01

Trait adjectives commonly employed in person perception studies have both evaluative and denotative meanings. Evaluative ratings of single traits shift with variations in the context of other traits ascribed to the stimulus person; the extent to which denotative changes underlie these evaluative context effects has been a theoretical controversy. In the first experiment, it was shown that context effects on quantitative ratings of denotation can be largely accounted for by evaluative halo effects. In the second experiment, increasing the denotative relatedness of context traits to the test trait didnot increase the effect of the context. Only the evaluative meaning of the context affected evaluation of the rated test trait. These studies suggest that the denotative relationship between a test adjective and its context has little influence on context effects in person perception, and that denotative meaning changes do not mediate context effects. Instead, evaluative judgments appear to be based on evaluative meaning.

Multidisciplinary analysis and design of printed wiring boards

NASA Astrophysics Data System (ADS)

Fulton, Robert E.; Hughes, Joseph L.; Scott, Waymond R., Jr.; Umeagukwu, Charles; Yeh, Chao-Pin

1991-04-01

Modern printed wiring board design depends on electronic prototyping using computer-based simulation and design tools. Existing electrical computer-aided design (ECAD) tools emphasize circuit connectivity with only rudimentary analysis capabilities. This paper describes a prototype integrated PWB design environment denoted Thermal Structural Electromagnetic Testability (TSET) being developed at Georgia Tech in collaboration with companies in the electronics industry. TSET provides design guidance based on enhanced electrical and mechanical CAD capabilities including electromagnetic modeling testability analysis thermal management and solid mechanics analysis. TSET development is based on a strong analytical and theoretical science base and incorporates an integrated information framework and a common database design based on a systematic structured methodology.

Helping Standards Make the Grade.

ERIC Educational Resources Information Center

Guskey, Thomas R.

2001-01-01

Educators can develop fair and accurate standards-based grading/reporting by switching to criterion-referenced grading practices; using differentiated criteria (denoting product, process, and progress); clarifying the purpose of each reporting tool; and developing a reporting form that identifies standards, facilitates interpretation, and…

An Analysis of Escort Formations

DTIC Science & Technology

1992-03-01

error sum of squares" is denoted by SSPE and calculated by SSpE (yjj -) 2 J (5.13) where j = denotes unique design points, and i = denotes the...observations The difference between SSE and SSPE represents the deviation between the observations and the model due to inadequacies in the model. This...difference is called sum of squares due to lack of fit and denoted by SSLF. 5.18 The ratio of SSLF to SSPE , each divided by its respective degrees of freedom

Modeling of Microstructure Evolution During the Thermomechanical Processing of Titanium Alloys (Preprint)

DTIC Science & Technology

2008-07-01

Tailoring the Properties of Aluminum and Titanium Alloys", Deformation, Processing, and Structure , G. Krauss, ed., ASM International, Materials Park, OH...1984, pp. 279-354. 51. G.W. Kuhlman, "A Critical Appraisal of Thermomechanical Processing of Structural Titanium Alloys", Microstructure/ Property ... titanium alloys is heavily dependent on the allotropic transformation from a hexagonal-close-packed crystal structure (denoted as alpha phase) found at

Synthetic-Type Control Charts for Time-Between-Events Monitoring

PubMed Central

Yen, Fang Yen; Chong, Khoo Michael Boon; Ha, Lee Ming

2013-01-01

This paper proposes three synthetic-type control charts to monitor the mean time-between-events of a homogenous Poisson process. The first proposed chart combines an Erlang (cumulative time between events, Tr) chart and a conforming run length (CRL) chart, denoted as Synth-Tr chart. The second proposed chart combines an exponential (or T) chart and a group conforming run length (GCRL) chart, denoted as GR-T chart. The third proposed chart combines an Erlang chart and a GCRL chart, denoted as GR-Tr chart. By using a Markov chain approach, the zero- and steady-state average number of observations to signal (ANOS) of the proposed charts are obtained, in order to evaluate the performance of the three charts. The optimal design of the proposed charts is shown in this paper. The proposed charts are superior to the existing T chart, Tr chart, and Synth-T chart. As compared to the EWMA-T chart, the GR-T chart performs better in detecting large shifts, in terms of the zero- and steady-state performances. The zero-state Synth-T4 and GR-Tr (r = 3 or 4) charts outperform the EWMA-T chart for all shifts, whereas the Synth-Tr (r = 2 or 3) and GR-T 2 charts perform better for moderate to large shifts. For the steady-state process, the Synth-Tr and GR-Tr charts are more efficient than the EWMA-T chart in detecting small to moderate shifts. PMID:23755231

Listening and Message Interpretation

ERIC Educational Resources Information Center

Edwards, Renee

2011-01-01

Message interpretation, the notion that individuals assign meaning to stimuli, is related to listening presage, listening process, and listening product. As a central notion of communication, meaning includes (a) denotation and connotation, and (b) content and relational meanings, which can vary in ambiguity and vagueness. Past research on message…

Color adaptation induced from linguistic description of color

PubMed Central

Zheng, Liling; Huang, Ping; Zhong, Xiao; Li, Tianfeng; Mo, Lei

2017-01-01

Recent theories propose that language comprehension can influence perception at the low level of perceptual system. Here, we used an adaptation paradigm to test whether processing language caused color adaptation in the visual system. After prolonged exposure to a color linguistic context, which depicted red, green, or non-specific color scenes, participants immediately performed a color detection task, indicating whether they saw a green color square in the middle of a white screen or not. We found that participants were more likely to perceive the green color square after listening to discourses denoting red compared to discourses denoting green or conveying non-specific color information, revealing that language comprehension caused an adaptation aftereffect at the perceptual level. Therefore, semantic representation of color may have a common neural substrate with color perception. These results are in line with the simulation view of embodied language comprehension theory, which predicts that processing language reactivates the sensorimotor systems that are engaged during real experience. PMID:28358807

Color adaptation induced from linguistic description of color.

PubMed

Zheng, Liling; Huang, Ping; Zhong, Xiao; Li, Tianfeng; Mo, Lei

2017-01-01

Recent theories propose that language comprehension can influence perception at the low level of perceptual system. Here, we used an adaptation paradigm to test whether processing language caused color adaptation in the visual system. After prolonged exposure to a color linguistic context, which depicted red, green, or non-specific color scenes, participants immediately performed a color detection task, indicating whether they saw a green color square in the middle of a white screen or not. We found that participants were more likely to perceive the green color square after listening to discourses denoting red compared to discourses denoting green or conveying non-specific color information, revealing that language comprehension caused an adaptation aftereffect at the perceptual level. Therefore, semantic representation of color may have a common neural substrate with color perception. These results are in line with the simulation view of embodied language comprehension theory, which predicts that processing language reactivates the sensorimotor systems that are engaged during real experience.

A non-linear dimension reduction methodology for generating data-driven stochastic input models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ganapathysubramanian, Baskar; Zabaras, Nicholas

Stochastic analysis of random heterogeneous media (polycrystalline materials, porous media, functionally graded materials) provides information of significance only if realistic input models of the topology and property variations are used. This paper proposes a framework to construct such input stochastic models for the topology and thermal diffusivity variations in heterogeneous media using a data-driven strategy. Given a set of microstructure realizations (input samples) generated from given statistical information about the medium topology, the framework constructs a reduced-order stochastic representation of the thermal diffusivity. This problem of constructing a low-dimensional stochastic representation of property variations is analogous to the problem ofmore » manifold learning and parametric fitting of hyper-surfaces encountered in image processing and psychology. Denote by M the set of microstructures that satisfy the given experimental statistics. A non-linear dimension reduction strategy is utilized to map M to a low-dimensional region, A. We first show that M is a compact manifold embedded in a high-dimensional input space R{sup n}. An isometric mapping F from M to a low-dimensional, compact, connected set A is contained in R{sup d}(d<

Land-Cover Trends of the Southern California Mountains Ecoregion

USGS Publications Warehouse

Soulard, Christopher E.; Raumann, Christian G.; Wilson, Tamara S.

2007-01-01

This report presents an assessment of land-use and land-cover (LU/LC) change in the Southern California Mountains ecoregion for the period 1973-2001. The Southern California Mountains is one of 84 Level-III ecoregions as defined by the U.S. Environmental Protection Agency (EPA). Ecoregions have served as a spatial framework for environmental resource management, denoting areas that contain a geographically distinct assemblage of biotic and abiotic phenomena including geology, physiography, vegetation, climate, soils, land use, wildlife, and hydrology. The established Land Cover Trends methodology generates estimates of change for ecoregions using a probability sampling approach and change-detection analysis of thematic land-cover images derived from Landsat satellite imagery.

10 CFR 1703.102 - Definitions; words denoting number, gender and tense.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Definitions; words denoting number, gender and tense. 1703... § 1703.102 Definitions; words denoting number, gender and tense. Agency record is a record in the... singular; the present tense includes the future tense; and words of one gender include the other gender. ...

10 CFR 1703.102 - Definitions; words denoting number, gender and tense.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Definitions; words denoting number, gender and tense. 1703... § 1703.102 Definitions; words denoting number, gender and tense. Agency record is a record in the... singular; the present tense includes the future tense; and words of one gender include the other gender. ...

10 CFR 1703.102 - Definitions; words denoting number, gender and tense.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Definitions; words denoting number, gender and tense. 1703... § 1703.102 Definitions; words denoting number, gender and tense. Agency record is a record in the... singular; the present tense includes the future tense; and words of one gender include the other gender. ...

10 CFR 1703.102 - Definitions; words denoting number, gender and tense.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Definitions; words denoting number, gender and tense. 1703... § 1703.102 Definitions; words denoting number, gender and tense. Agency record is a record in the... singular; the present tense includes the future tense; and words of one gender include the other gender. ...

10 CFR 1703.102 - Definitions; words denoting number, gender and tense.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Definitions; words denoting number, gender and tense. 1703... § 1703.102 Definitions; words denoting number, gender and tense. Agency record is a record in the... singular; the present tense includes the future tense; and words of one gender include the other gender. ...

77 FR 4822 - Western Hemisphere Travel Initiative: Designation of an Approved Native American Tribal Card...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... Tribe of Idaho as an Acceptable Document To Denote Identity and Citizenship AGENCY: U.S. Customs and... to denote identity and citizenship of Kootenai Tribe members entering the United States from... other document or combination of documents as the Secretary deems sufficient to denote identity and...

What's in a Name? Denotation, Connotation, and "A Boy Named Sue"

ERIC Educational Resources Information Center

Lawton, Bessie

2011-01-01

Language choice--specifically word choice--is an important topic on a basic communication or public speaking course. One sub-topic under "Language" involves understanding the difference between denotation and connotation. Denotation refers to a word's definition, while connotation refers to the emotions associated with the word. Speakers need to…

Signal processing in ultrasound. [for diagnostic medicine

NASA Technical Reports Server (NTRS)

Le Croissette, D. H.; Gammell, P. M.

1978-01-01

Signal is the term used to denote the characteristic in the time or frequency domain of the probing energy of the system. Processing of this signal in diagnostic ultrasound occurs as the signal travels through the ultrasonic and electrical sections of the apparatus. The paper discusses current signal processing methods, postreception processing, display devices, real-time imaging, and quantitative measurements in noninvasive cardiology. The possibility of using deconvolution in a single transducer system is examined, and some future developments using digital techniques are outlined.

Fundamental plasma emission involving ion sound waves

NASA Technical Reports Server (NTRS)

Cairns, Iver H.

1987-01-01

The theory for fundamental plasma emission by the three-wave processes L + or - S to T (where L, S and T denote Langmuir, ion sound and transverse waves, respectively) is developed. Kinematic constraints on the characteristics and growth lengths of waves participating in the wave processes are identified. In addition the rates, path-integrated wave temperatures, and limits on the brightness temperature of the radiation are derived.

Activating Event Knowledge

ERIC Educational Resources Information Center

Hare, Mary; Jones, Michael; Thomson, Caroline; Kelly, Sarah; McRae, Ken

2009-01-01

An increasing number of results in sentence and discourse processing demonstrate that comprehension relies on rich pragmatic knowledge about real-world events, and that incoming words incrementally activate such knowledge. If so, then even outside of any larger context, nouns should activate knowledge of the generalized events that they denote or…

The Polyanalytic Ginibre Ensembles

NASA Astrophysics Data System (ADS)

Haimi, Antti; Hedenmalm, Haakan

2013-10-01

For integers n, q=1,2,3,… , let Pol n, q denote the -linear space of polynomials in z and , of degree ≤ n-1 in z and of degree ≤ q-1 in . We supply Pol n, q with the inner product structure of the resulting Hilbert space is denoted by Pol m, n, q . Here, it is assumed that m is a positive real. We let K m, n, q denote the reproducing kernel of Pol m, n, q , and study the associated determinantal process, in the limit as m, n→+∞ while n= m+O(1); the number q, the degree of polyanalyticity, is kept fixed. We call these processes polyanalytic Ginibre ensembles, because they generalize the Ginibre ensemble—the eigenvalue process of random (normal) matrices with Gaussian weight. There is a physical interpretation in terms of a system of free fermions in a uniform magnetic field so that a fixed number of the first Landau levels have been filled. We consider local blow-ups of the polyanalytic Ginibre ensembles around points in the spectral droplet, which is here the closed unit disk . We obtain asymptotics for the blow-up process, using a blow-up to characteristic distance m -1/2; the typical distance is the same both for interior and for boundary points of . This amounts to obtaining the asymptotical behavior of the generating kernel K m, n, q . Following (Ameur et al. in Commun. Pure Appl. Math. 63(12):1533-1584, 2010), the asymptotics of the K m, n, q are rather conveniently expressed in terms of the Berezin measure (and density) [Equation not available: see fulltext.] For interior points | z|<1, we obtain that in the weak-star sense, where δ z denotes the unit point mass at z. Moreover, if we blow up to the scale of m -1/2 around z, we get convergence to a measure which is Gaussian for q=1, but exhibits more complicated Fresnel zone behavior for q>1. In contrast, for exterior points | z|>1, we have instead that , where is the harmonic measure at z with respect to the exterior disk . For boundary points, | z|=1, the Berezin measure converges to the unit point mass at z, as with interior points, but the blow-up to the scale m -1/2 exhibits quite different behavior at boundary points compared with interior points. We also obtain the asymptotic boundary behavior of the 1-point function at the coarser local scale q 1/2 m -1/2.

Satellite-Derived Management Zones

NASA Technical Reports Server (NTRS)

Lepoutre, Damien; Layrol, Laurent

2005-01-01

The term "satellite-derived management zones" (SAMZ) denotes agricultural management zones that are subdivisions of large fields and that are derived from images of the fields acquired by instruments aboard Earth-orbiting satellites during approximately the past 15 years. "SAMZ" also denotes the methodology and the software that implements the methodology for creating such zones. The SAMZ approach is one of several products of continuing efforts to realize a concept of precision agriculture, which involves optimal variations in seeding, in application of chemicals, and in irrigation, plus decisions to farm or not to farm certain portions of fields, all in an effort to maximize profitability in view of spatial and temporal variations in the growth and health of crops, and in the chemical and physical conditions of soils. As used here, "management zone" signifies, more precisely, a subdivision of a field within which the crop-production behavior is regarded as homogeneous. From the perspective of precision agriculture, management zones are the smallest subdivisions between which the seeding, application of chemicals, and other management parameters are to be varied. In the SAMZ approach, the main sources of data are the archives of satellite imagery that have been collected over the years for diverse purposes. One of the main advantages afforded by the SAMZ approach is that the data in these archives can be reused for purposes of precision agriculture at low cost. De facto, these archives contain information on all sources of variability within a field, including weather, crop types, crop management, soil types, and water drainage patterns. The SAMZ methodology involves the establishment of a Web-based interface based on an algorithm that generates management zones automatically and quickly from archival satellite image data in response to requests from farmers. A farmer can make a request by either uploading data describing a field boundary to the Web site or else drawing the boundary on a reference image. Hence, a farmer can start to engage in precision farming shortly after gaining access to the Web site, without the need for incurring the high costs of conventional precision-agriculture data-collection practices that include collecting soil samples, mapping electrical conductivity of soil, and compiling multiyear crop-yield data. Given the boundary of a field, a SAMZ server computes the zones within the field in a three-stage process. In the first stage, a vector-valued image of the field is constructed by assembling, from the archives, the equivalent of a stack of the available images of the field (see figure). In the second stage, the vector-valued image is analyzed by use of a wavelet transform that detects spatial variations considered significant for precision farming while suppressing small-scale heterogeneities that are regarded as insignificant. In the third stage, a segmentation algorithm assembles the zones from smaller regions that have been identified in the wavelet analysis.

SAMZ: Satellite-Derived Management Zones

NASA Technical Reports Server (NTRS)

2004-01-01

The term "satellite-derived management zones" (SAMZ) denotes agricultural management zones that are subdivisions of large fields and that are derived from images of the fields acquired by instruments aboard Earth orbiting satellites during approximately the past 15 years. "SAMZ" also denotes the methodology and the software that implements the methodology for creating such zones. The SAMZ approach is one of several products of continuing efforts to realize a concept of precision agriculture, which involves optimal variations in seeding, in application of chemicals, and in irrigation, plus decisions to farm or not to farm certain portions of fields, all in an effort to maximize profitability in view of spatial and temporal variations in the growth and health of crops and in the chemical and physical conditions of soils. As used here, "management zone" signifies, more precisely, a subdivision of a field within which the crop production behavior is regarded as homogeneous. From the perspective of precision agriculture, management zones are the smallest subdivisions between which the seeding, application of chemicals, and other management parameters are to be varied. In the SAMZ approach, the main sources of data are the archives of satellite imagery that have been collected over the years for diverse purposes. One of the main advantages afforded by the SAMZ approach is that the data in these archives can be reused for purposes of precision agriculture at low cost. De facto, these archives contain information on all sources of variability within a field, including weather, crop types, crop management, soil types, and water drainage patterns. The SAMZ methodology involves the establishment of a Web-based interface based on an algorithm that generates management zones automatically and quickly from archival satellite image data in response to requests from farmers. A farmer can make a request by either uploading data describing a field boundary to the Web site or else drawing the boundary on a reference image. Hence, a farmer can start to engage in precision farming shortly after gaining access to the Web site, without need for incurring the high costs of conventional precision-agriculture data-collection practices that include collecting soil samples, mapping electrical conductivity of soil, and compiling multi-year crop-yield data. Given the boundary of a field, a SAMZ server computes the zones within the field in a three-stage process. In the first stage, a vector-valued image of the field is constructed by assembling, from the archives, the equivalent of a stack of the available images of the field (see figure). In the second stage, the vector-valued image is analyzed by use of a wavelet transform that detects spatial variations considered significant for precision farming while suppressing small-scale heterogeneities that are regarded as insignificant. In the third stage, a segmentation algorithm assembles the zones from smaller regions that have been identified in the wavelet analysis.

Neoliberal Social Inclusion? The Agenda of the Australian Universities Community Engagement Alliance

ERIC Educational Resources Information Center

Peacock, David

2012-01-01

University-community engagement (UCE) represents a hybrid discourse and a set of practices within contemporary higher education. As a modality of research and teaching, "engagement" denotes the process of universities forming partnerships with external communities for the promised generation of mutually beneficial and socially responsive…

Visual Literacy: A Vital Skill in the Process of Rhetorical Criticism.

ERIC Educational Resources Information Center

Flory, Joyce

"Visual literacy" denotes the abilities, competencies, and skills necessary to accurately intercept, interpret, understand, and create communication in visual modes. The term also refers to a popular movement of both students and teachers (e.g., Visual Literacy Association, Action for Children's Television, The Screen Educator's Society) who wish…

Validating and Optimizing the Effects of Model Progression in Simulation-Based Inquiry Learning

ERIC Educational Resources Information Center

Mulder, Yvonne G.; Lazonder, Ard W.; de Jong, Ton; Anjewierden, Anjo; Bollen, Lars

2012-01-01

Model progression denotes the organization of the inquiry learning process in successive phases of increasing complexity. This study investigated the effectiveness of model progression in general, and explored the added value of either broadening or narrowing students' possibilities to change model progression phases. Results showed that…

Experimental demonstration of the anti-maser

NASA Astrophysics Data System (ADS)

Mazzocco, Anthony; Aviles, Michael; Andrews, Jim; Dawson, Nathan; Crescimanno, Michael

2012-10-01

We denote by ``anti-maser'' a coherent perfect absorption (CPA) process in the radio frequency domain. We demonstrate several experimental realizations of the anti-maser suitable for an advanced undergraduate laboratory. Students designed, assembled and tested these devices, as well as the inexpensive laboratory setup and experimental protocol for displaying various CPA phenomenon.

Family Preferences for Childcare in Central Kentucky

ERIC Educational Resources Information Center

Vanover, Sarah Helen Taylor

2016-01-01

Early childhood professionals have established a set list of characteristics that denote a high quality early care and education environment for children under the age of kindergarten, but these may not be the same characteristics that parents consider in the decision-making process. The researcher used survey research to obtain quantitative…

Ground Vibration Test of the Aerostructure Test Wing 2

NASA Technical Reports Server (NTRS)

Herrera, Claudia; Moholt, Matthew

2009-01-01

The Aerostructures Test Wing (ATW) was developed to test unique concepts for flutter prediction and control synthesis. A follow-on to the successful ATW, denoted ATW2, was fabricated as a test bed to validate a variety of instrumentation in flight and to collect data for development of advanced signal processing algorithms for flutter prediction and aviation safety. As a means to estimate flutter speed, a ground vibration test (GVT) was performed. The results of a GVT are typically utilized to update structural dynamics finite element (FE) models used for flutter analysis. In this study, two GVT methodologies were explored to determine which nodes provide the best sensor locations: (i) effective independence and (ii) kinetic energy sorting algorithms. For measurement, ten and twenty sensors were used for three and 10 target test modes. A total of six accelerometer configurations measured frequencies and mode shapes. This included locations used in the original ATW GVT. Moreover, an optical measurement system was used to acquire data without mass effects added by conventional sensors. A considerable frequency shift was observed in comparing the data from the accelerometers to the optical data. The optical data provided robust data for use of the ATW2 finite element model update.

Midwives and the Computerization of Perinatal Data Entry: The Theory of Beneficial Engagement.

PubMed

Craswell, Alison; Moxham, Lorna; Broadbent, Marc

2016-10-01

Theory building in nursing and midwifery both to explain and inform practice is important to advance these professions via provision of a theoretical foundation. This research explored the process of perinatal data entry undertaken by midwives to explore the impact of the movement from paper to computer collection of data. Use of grounded theory methodology enabled theory building, leading to a theoretical understanding of the phenomenon and development of the Theory of Beneficial Engagement grounded in the data. Methods involved in-depth semistructured interviews with 15 users of perinatal data systems. Participants were recruited from 12 different healthcare locations and were utilizing three different electronic systems for data entry. The research question that guided the study focused on examining the influences of using the computer for perinatal data entry. Findings indicated that qualities particular to some midwives denoted engagement with perinatal data entry, suggesting a strong desire to enter complete, timely, and accurate data. The Theory of Beneficial Engagement provides a model of user engagement with systems for perinatal data entry consistent with other theories of engagement. The theory developed describes this phenomenon in a simple, elegant manner that can be applied to other areas where mandatory data entry is undertaken.

Neuro-Analogical Gate Tuning of Trajectory Data Fusion for a Mecanum-Wheeled Special Needs Chair

PubMed Central

ElSaharty, M. A.; zakzouk, Ezz Eldin

2017-01-01

Trajectory tracking of mobile wheeled chairs using internal shaft encoder and inertia measurement unit(IMU), exhibits several complications and accumulated errors in the tracking process due to wheel slippage, offset drift and integration approximations. These errors can be realized when comparing localization results from such sensors with a camera tracking system. In long trajectory tracking, such errors can accumulate and result in significant deviations which make data from these sensors unreliable for tracking. Meanwhile the utilization of an external camera tracking system is not always a feasible solution depending on the implementation environment. This paper presents a novel sensor fusion method that combines the measurements of internal sensors to accurately predict the location of the wheeled chair in an environment. The method introduces a new analogical OR gate structured with tuned parameters using multi-layer feedforward neural network denoted as “Neuro-Analogical Gate” (NAG). The resulting system minimize any deviation error caused by the sensors, thus accurately tracking the wheeled chair location without the requirement of an external camera tracking system. The fusion methodology has been tested with a prototype Mecanum wheel-based chair, and significant improvement over tracking response, error and performance has been observed. PMID:28045973

Sintering-resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Zhanyong; Schweitzer, Neil; League, Aaron

2016-02-17

Developing supported single-site catalysts is an important goal in heterogeneous catalysis, since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based MOF, NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a metal–organic framework (MOF) (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation. The structure of the active sites in Ni-AIM is proposed, revealing its single-site nature. More importantly, due to themore » organic linker used to construct the MOF support, the Ni ions stay isolated throughout the hydrogenation catalysis, in accord with its long-term stability. A quantum chemical characterization of the catalyst and the catalytic process complements the experimental results. With validation of computational modeling protocols, we further targeted ethylene oligomerization catalysis by Ni-AIM guided by theoretical prediction. Given the generality of the AIM methodology, this emerging class of materials should prove ripe for the discovery of new catalysts for the transformation of volatile substrates.« less

76 FR 33776 - Western Hemisphere Travel Initiative: Designation of an Approved Native American Tribal Card...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-09

... Yaqui Tribe as an Acceptable Document To Denote Identity and Citizenship AGENCY: U.S. Customs and Border... Initiative. The approved card may be used to denote identity and U.S. citizenship of Pascua Yaqui members... denote identity and citizenship for all travel into the United States. See 8 U.S.C. 1185 note. On April 3...

Topic shift impairs pronoun resolution during sentence comprehension: Evidence from event-related potentials.

PubMed

Xu, Xiaodong; Zhou, Xiaolin

2016-02-01

This study investigated how topic shift and topic continuation influence pronoun interpretation in Chinese. ERPs recorded on pronouns in topic structure showed stronger and earlier late positive responses (P600) for the topic-shift than for the topic-continuation conditions. However, in nontopic structure where the subject (denoting only subjecthood), rather than the topic (denoting both topichood and subjecthood), acted as the antecedent of the pronoun, almost indistinguishable P600 responses were obtained on the pronoun regardless of whether it was referring to the subject (i.e., subject continuation) or the object (i.e., subject shift). Moreover, stronger and earlier P600 responses were elicited by pronouns in the topic-shift than in the subject-shift conditions, although there was no difference between the topic-continuation and the subject-continuation conditions. These findings suggest that topic shift results in greater difficulty in the resolution stage of referential processing, although the bonding process is not sensitive to the manipulation of topic status, and that topic has a privileged cognitive status relative to other nontopic entities (e.g., subject) in real-time language processing. © 2015 Society for Psychophysiological Research.

Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

PubMed

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Lineage dynamics and mutation-selection balance in non-adapting asexual populations

NASA Astrophysics Data System (ADS)

Pénisson, Sophie; Sniegowski, Paul D.; Colato, Alexandre; Gerrish, Philip J.

2013-02-01

In classical population genetics, mutation-selection balance refers to the equilibrium frequency of a deleterious allele established and maintained under two opposing forces: recurrent mutation, which tends to increase the frequency of the allele; and selection, which tends to decrease its frequency. In a haploid population, if μ denotes the per capita rate of production of the deleterious allele by mutation and s denotes the selective disadvantage of carrying the allele, then the classical mutation-selection balance frequency of the allele is approximated by μ/s. This calculation assumes that lineages carrying the mutant allele in question—the ‘focal allele’—do not accumulate deleterious mutations linked to the focal allele. In principle, indirect selection against the focal allele caused by such additional mutations can decrease the frequency of the focal allele below the classical mutation-selection balance. This effect of indirect selection will be strongest in an asexual population, in which the entire genome is in linkage. Here, we use an approach based on a multitype branching process to investigate this effect, analyzing lineage dynamics under mutation, direct selection, and indirect selection in a non-adapting asexual population. We find that the equilibrium balance between recurrent mutation to the focal allele and the forces of direct and indirect selection against the focal allele is closely approximated by γμ/(s + U) (s = 0 if the focal allele is neutral), where γ ≈ eθθ-(ω+θ)(ω + θ)(Γ(ω + θ) - Γ(ω + θ,θ)), \\theta =U/\\tilde {s}, and \\omega =s/\\tilde {s}; U denotes the genomic deleterious mutation rate and \\tilde {s} denotes the geometric mean selective disadvantage of deleterious mutations elsewhere on the genome. This mutation-selection balance for asexual populations can remain surprisingly invariant over wide ranges of the mutation rate.

Curve and Polygon Evolution Techniques for Image Processing

DTIC Science & Technology

2002-01-01

iterative image registration technique with an application to stereo vision. IJCAI, pages 674–679, 1981. 127 [93] R . Malladi , J.A. Sethian, and B.C...Notation A digital image to be processed is a 2-Dimensional (2-D) function denoted by I , I : ! R , where R2 is the domain of the function. Processing a...function Io(x; y), which depends on two spatial variables, x 2 R , and y 2 R , via a partial differential equation (PDE) takes the form; It = A(I; Ix

A Compressed Sensing Based Ultra-Wideband Communication System

DTIC Science & Technology

2009-06-01

principle, most of the processing at the receiver can be moved to the transmitter—where energy consumption and computation are sufficient for many advanced...extended to continuous time signals. We use ∗ to denote the convolution process in a linear time-invariant (LTI) system. Assume that there is an analog...Filter Channel Low Rate A/D Processing Sparse Bit Sequence UWB Pulse Generator α̂ Waves)(RadioGHz 5 MHz125 θ Ψ Φ y θ̂ 1 ˆ arg min s.t. yθ

Revealing evolutionary pathways by fitness landscape reconstruction.

PubMed

Kogenaru, Manjunatha; de Vos, Marjon G J; Tans, Sander J

2009-01-01

The concept of epistasis has since long been used to denote non-additive fitness effects of genetic changes and has played a central role in understanding the evolution of biological systems. Owing to an array of novel experimental methodologies, it has become possible to experimentally determine epistatic interactions as well as more elaborate genotype-fitness maps. These data have opened up the investigation of a host of long-standing questions in evolutionary biology, such as the ruggedness of fitness landscapes and the accessibility of mutational trajectories, the evolution of sex, and the origin of robustness and modularity. Here we review this recent and timely marriage between systems biology and evolutionary biology, which holds the promise to understand evolutionary dynamics in a more mechanistic and predictive manner.

3D Geo: An Alternative Approach

NASA Astrophysics Data System (ADS)

Georgopoulos, A.

2016-10-01

The expression GEO is mostly used to denote relation to the earth. However it should not be confined to what is related to the earth's surface, as other objects also need three dimensional representation and documentation, like cultural heritage objects. They include both tangible and intangible ones. In this paper the 3D data acquisition and 3D modelling of cultural heritage assets are briefly described and their significance is also highlighted. Moreover the organization of such information, related to monuments and artefacts, into relational data bases and its use for various purposes, other than just geometric documentation is also described and presented. In order to help the reader understand the above, several characteristic examples are presented and their methodology explained and their results evaluated.

A Comparison of Abstract Writing Style between English and Chinese

ERIC Educational Resources Information Center

Zhou, Xiaoying; Liao, Hangjie

2018-01-01

In this paper the authors conducted a comprehensive study on English abstract writing style. Abstraction is the process of forming a theoretical concept based on the observation and classification of object things. This concept has no definite denotation. However in specific situation it can be clearly understood. In English, writing an abstract…

On the Role of Entailment Patterns and Scalar Implicatures in the Processing of Numerals

ERIC Educational Resources Information Center

Panizza, Daniele; Chierchia, Gennaro; Clifton, Charles, Jr.

2009-01-01

There has been much debate, in both the linguistics and the psycholinguistics literature, concerning numbers and the interpretation of number denoting determiners ("numerals"). Such debate concerns, in particular, the nature and distribution of upper-bounded ("exact") interpretations vs. lower-bounded ("at-least") construals. In the present paper…

Reflections on Doing Inclusive Research in the "Making Life Good in the Community" Study

ERIC Educational Resources Information Center

Bigby, Christine; Frawley, Patsie

2010-01-01

Background: The involvement of people with intellectual disability in research is framed as inclusive, denoting their active participation in its processes. However, questions are raised about ownership and control, genuineness of involvement, and the need for honest accounts to develop practice. Such issues are particularly pressing in Australia,…

System Identification of an on Orbit Spacecraft’s Antenna Dynamics

DTIC Science & Technology

2009-06-01

10  II. Background Information ...boxes denote the 20 modes of the flexible antenna structure, all of which are in parallel. The information for the modes (gain, natural frequency...thoughts and processes of the writer. Chapter 2 reviews what information is available for the various elements of signal analysis and system

ERP Evidence for Telicity Effects on Syntactic Processing in Garden-Path Sentences

ERIC Educational Resources Information Center

Malaia, Evguenia; Wilbur, Ronnie B.; Weber-Fox, Christine

2009-01-01

Verbs contain multifaceted information about both the semantics of an action, and potential argument structures. Linguistic theory classifies verbs according to whether the denoted action has an inherent (telic) end-point ("fall," "awaken"), or whether it is considered homogenous, or atelic ("read," "worship"). The aim of our study was to examine…

Dockside Tarts and Modesty Boards: A Review of Recent Policy on Sexualisation

ERIC Educational Resources Information Center

Bragg, Sara

2012-01-01

In recent years, the "sexualisation of childhood" has moved into the centre ground of public policy and debate internationally, despite the conceptual confusions and inadequate evidence surrounding the processes denoted by the term. This paper focuses primarily on the most recent of several UK government-commissioned reviews and reports,…

A Role for the Motor System in Binding Abstract Emotional Meaning

PubMed Central

Carota, Francesca; Hauk, Olaf; Mohr, Bettina; Pulvermüller, Friedemann

2012-01-01

Sensorimotor areas activate to action- and object-related words, but their role in abstract meaning processing is still debated. Abstract emotion words denoting body internal states are a critical test case because they lack referential links to objects. If actions expressing emotion are crucial for learning correspondences between word forms and emotions, emotion word–evoked activity should emerge in motor brain systems controlling the face and arms, which typically express emotions. To test this hypothesis, we recruited 18 native speakers and used event-related functional magnetic resonance imaging to compare brain activation evoked by abstract emotion words to that by face- and arm-related action words. In addition to limbic regions, emotion words indeed sparked precentral cortex, including body-part–specific areas activated somatotopically by face words or arm words. Control items, including hash mark strings and animal words, failed to activate precentral areas. We conclude that, similar to their role in action word processing, activation of frontocentral motor systems in the dorsal stream reflects the semantic binding of sign and meaning of abstract words denoting emotions and possibly other body internal states. PMID:21914634

Pulmonary disorder and present nuclear denotation: A brief summary

PubMed Central

Wiwanitkit, Viroj

2011-01-01

There are many health effects caused by leaked radiation from damaged reactors of a nuclear power plant. However, the effect on pulmonary system is not reported much. Focusing on the present nuclear denotation crisis in Japan, it is wise to review on the specific issue of pulmonary disorder and nuclear denotation. Several disorders of interest, including malignancy and non-malignancy disorders, are mentioned in the literature. PMID:21760839

Office Automation: A Look Beyond Word Processing.

DTIC Science & Technology

1983-06-01

implying the type and nature of work performed by white-collar employees , and "products" will denote the techniques and type of equipment necessary...REPORT & PERIOD COVERED Office Automation: A Look Beyond Master’s Thesis Word Processing June 1983 6. PERFORMING ORG. REPORT NUMUER 7. AUTYOH) S...look at the problems of implementing an automated office and the possible impact it can have on human office workers. The purpose of this thesis is thus

Representation mutations from standard genetic codes

NASA Astrophysics Data System (ADS)

Aisah, I.; Suyudi, M.; Carnia, E.; Suhendi; Supriatna, A. K.

2018-03-01

Graph is widely used in everyday life especially to describe model problem and describe it concretely and clearly. In addition graph is also used to facilitate solve various kinds of problems that are difficult to be solved by calculation. In Biology, graph can be used to describe the process of protein synthesis in DNA. Protein has an important role for DNA (deoxyribonucleic acid) or RNA (ribonucleic acid). Proteins are composed of amino acids. In this study, amino acids are related to genetics, especially the genetic code. The genetic code is also known as the triplet or codon code which is a three-letter arrangement of DNA nitrogen base. The bases are adenine (A), thymine (T), guanine (G) and cytosine (C). While on RNA thymine (T) is replaced with Urasil (U). The set of all Nitrogen bases in RNA is denoted by N = {C U, A, G}. This codon works at the time of protein synthesis inside the cell. This codon also encodes the stop signal as a sign of the stop of protein synthesis process. This paper will examine the process of protein synthesis through mathematical studies and present it in three-dimensional space or graph. The study begins by analysing the set of all codons denoted by NNN such that to obtain geometric representations. At this stage there is a matching between the sets of all nitrogen bases N with Z 2 × Z 2; C=(\\overline{0},\\overline{0}),{{U}}=(\\overline{0},\\overline{1}),{{A}}=(\\overline{1},\\overline{0}),{{G}}=(\\overline{1},\\overline{1}). By matching the algebraic structure will be obtained such as group, group Klein-4,Quotien group etc. With the help of Geogebra software, the set of all codons denoted by NNN can be presented in a three-dimensional space as a multicube NNN and also can be represented as a graph, so that can easily see relationship between the codon.

Telemetry Attributes Transfer Standard (TMATS) Handbook

DTIC Science & Technology

2013-02-01

interpretations of TMATS files so that all parties will benefit from its usage. The RCC gives special acknowledgement for production of this document to the...denoted with a *R-CH10* shall indicate the minimum required RCC IRIG 106, Chapter 10 TMATS Setup Record attributes. b. Code names denoted with a * RO ...supported data channel dependent. c. Code names denoted with a * RO -PAK shall indicate the RCC IRIG 106, Chapter 10 TMATS Setup Record attributes

Large Deviations for Stationary Probabilities of a Family of Continuous Time Markov Chains via Aubry-Mather Theory

NASA Astrophysics Data System (ADS)

Lopes, Artur O.; Neumann, Adriana

2015-05-01

In the present paper, we consider a family of continuous time symmetric random walks indexed by , . For each the matching random walk take values in the finite set of states ; notice that is a subset of , where is the unitary circle. The infinitesimal generator of such chain is denoted by . The stationary probability for such process converges to the uniform distribution on the circle, when . Here we want to study other natural measures, obtained via a limit on , that are concentrated on some points of . We will disturb this process by a potential and study for each the perturbed stationary measures of this new process when . We disturb the system considering a fixed potential and we will denote by the restriction of to . Then, we define a non-stochastic semigroup generated by the matrix , where is the infinifesimal generator of . From the continuous time Perron's Theorem one can normalized such semigroup, and, then we get another stochastic semigroup which generates a continuous time Markov Chain taking values on . This new chain is called the continuous time Gibbs state associated to the potential , see (Lopes et al. in J Stat Phys 152:894-933, 2013). The stationary probability vector for such Markov Chain is denoted by . We assume that the maximum of is attained in a unique point of , and from this will follow that . Thus, here, our main goal is to analyze the large deviation principle for the family , when . The deviation function , which is defined on , will be obtained from a procedure based on fixed points of the Lax-Oleinik operator and Aubry-Mather theory. In order to obtain the associated Lax-Oleinik operator we use the Varadhan's Lemma for the process . For a careful analysis of the problem we present full details of the proof of the Large Deviation Principle, in the Skorohod space, for such family of Markov Chains, when . Finally, we compute the entropy of the invariant probabilities on the Skorohod space associated to the Markov Chains we analyze.

PASCO: Structural panel analysis and sizing code: Users manual - Revised

NASA Technical Reports Server (NTRS)

Anderson, M. S.; Stroud, W. J.; Durling, B. J.; Hennessy, K. W.

1981-01-01

A computer code denoted PASCO is described for analyzing and sizing uniaxially stiffened composite panels. Buckling and vibration analyses are carried out with a linked plate analysis computer code denoted VIPASA, which is included in PASCO. Sizing is based on nonlinear mathematical programming techniques and employs a computer code denoted CONMIN, also included in PASCO. Design requirements considered are initial buckling, material strength, stiffness and vibration frequency. A user's manual for PASCO is presented.

Objects as closures: Abstract semantics of object oriented languages

NASA Technical Reports Server (NTRS)

Reddy, Uday S.

1989-01-01

We discuss denotational semantics of object-oriented languages, using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin, in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

Ballistics Tests of Fibrous Concrete Dome and Plate Specimens

DTIC Science & Technology

1976-04-01

x 0.22 x 1 in. chopped steel fibers from U.S. Steel. KG denotes 1 in. fiberglass fibers from Owens - Corning . Table 3 Dome Test Results Test Fiber...1 in. drawn steel fibers Innii National Standard. FG denotes fiberglass fibers from Owens - Corning . Table 4b 30-Callber Machine Gun Plate Teat...drawn steel fibers from National Standard. FG denotes fiberglass fibers from Owens - Corning . { ♦ Tabk4c 45-Callbcr Pbtol Plate Teat Reantti lypeof

[Conflict as a reality and a cultural challenge in the practice of nurses' management].

PubMed

Prochnow, Adelina Giacomelli; Leite, Joséte Luzia; Erdmann, Alacoque Lorenzini; Trevizan, Maria Auxiliadora

2007-12-01

The practice of nurses' management is permeated by conflicts that can be interpreted through culture references. The objective of this study is to denote cultural specificities, analyzed according to Geertz's Cultural Interpretative Theory, that are expressed as conflicts in the scope of nurses' management at a University Hospital. The results denoted the incorporation of ideological elements and mechanisms of control and power, whose origin can be seen in the way in which the work is organized. The application of policies based on the profession's very values was observed. Practices highlight a cultural construction that elucidates some understandings regarding cognitive, social and behavioral processes, because they organize the interpretations and the answers to the events of nurses' practices in management. The results of this study point out the importance of organizational culture in the practice of Nursing management in the face of labor uncertainties in the complexity of a hospital environment.

The Interplay between Value and Relatedness as Bases for Metacognitive Monitoring and Control: Evidence for Agenda-Based Monitoring

ERIC Educational Resources Information Center

Soderstrom, Nicholas C.; McCabe, David P.

2011-01-01

Two experiments are reported examining how value and relatedness interact to influence metacognitive monitoring and control processes. Participants studied unrelated and related word pairs, each accompanied by point values denoting how important the items were to remember. These values were presented either before or after each pair in a…

Student Responses to the Women's Reclamation Work in the Philosophy of Education

ERIC Educational Resources Information Center

Wojcik, Teresa Genevieve; Titone, Connie

2013-01-01

Reclamation work denotes the process of uncovering the lost contributions of women to the philosophy of education, analyzing their works, making them accessible to a larger audience, and (re)introducing them to the historical record and canon. Since the 1970s, scholars have been engaged in the reclamation work, thus making available to students,…

Evidence for impulsive solar wind plasma penetration through the dayside magnetopause

NASA Astrophysics Data System (ADS)

Lundin, R.; Sauvaud, J.-A.; Rème, H.; Balogh, A.; Dandouras, I.; Bosqued, J. M.; Carlson, C.; Parks, G. K.; Möbius, E.; Kistler, L. M.; Klecker, B.; Amata, E.; Formisano, V.; Dunlop, M.; Eliasson, L.; Korth, A.; Lavraud, B.; McCarthy, M.

2003-02-01

This paper presents in situ observational evidence from the Cluster Ion Spectrometer (CIS) on Cluster of injected solar wind "plasma clouds" protruding into the day-side high-latitude magnetopause. The plasma clouds, presumably injected by a transient process through the day-side magnetopause, show characteristics implying a generation mechanism denoted impulsive penetration (Lemaire and Roth, 1978).

Cumulative Culture and Future Thinking: Is Mental Time Travel a Prerequisite to Cumulative Cultural Evolution?

ERIC Educational Resources Information Center

Vale, G. L.; Flynn, E. G.; Kendal, R. L.

2012-01-01

Cumulative culture denotes the, arguably, human capacity to build on the cultural behaviors of one's predecessors, allowing increases in cultural complexity to occur such that many of our cultural artifacts, products and technologies have progressed beyond what a single individual could invent alone. This process of cumulative cultural evolution…

Medium of Instruction in Asia: Context, Processes and Outcomes

ERIC Educational Resources Information Center

Hamid, M. Obaidul; Nguyen, Hoa Thi Mai; Baldauf, Richard B., Jr.

2013-01-01

One major impact of globalisation on education is denoted by the growing trend to use English, the global language, as a medium of instruction (MOI) in emerging polities that are trying to enhance their English-speaking capacities. This article emphasises developing an understanding of MOI from a language policy and planning as well as an…

Parameter inference from hitting times for perturbed Brownian motion.

PubMed

Tamborrino, Massimiliano; Ditlevsen, Susanne; Lansky, Peter

2015-07-01

A latent internal process describes the state of some system, e.g. the social tension in a political conflict, the strength of an industrial component or the health status of a person. When this process reaches a predefined threshold, the process terminates and an observable event occurs, e.g. the political conflict finishes, the industrial component breaks down or the person dies. Imagine an intervention, e.g., a political decision, maintenance of a component or a medical treatment, is initiated to the process before the event occurs. How can we evaluate whether the intervention had an effect? To answer this question we describe the effect of the intervention through parameter changes of the law governing the internal process. Then, the time interval between the start of the process and the final event is divided into two subintervals: the time from the start to the instant of intervention, denoted by S, and the time between the intervention and the threshold crossing, denoted by R. The first question studied here is: What is the joint distribution of (S,R)? The theoretical expressions are provided and serve as a basis to answer the main question: Can we estimate the parameters of the model from observations of S and R and compare them statistically? Maximum likelihood estimators are calculated and applied on simulated data under the assumption that the process before and after the intervention is described by the same type of model, i.e. a Brownian motion, but with different parameters. Also covariates and handling of censored observations are incorporated into the statistical model, and the method is illustrated on lung cancer data.

Objects as closures - Abstract semantics of object oriented languages

NASA Technical Reports Server (NTRS)

Reddy, Uday S.

1988-01-01

The denotational semantics of object-oriented languages is discussed using the concept of closure widely used in (semi) functional programming to encapsulate side effects. It is shown that this denotational framework is adequate to explain classes, instantiation, and inheritance in the style of Simula as well as SMALLTALK-80. This framework is then compared with that of Kamin (1988), in his recent denotational definition of SMALLTALK-80, and the implications of the differences between the two approaches are discussed.

Preloading To Accelerate Slow-Crack-Growth Testing

NASA Technical Reports Server (NTRS)

Gyekenyesi, John P.; Choi, Sung R.; Pawlik, Ralph J.

2004-01-01

An accelerated-testing methodology has been developed for measuring the slow-crack-growth (SCG) behavior of brittle materials. Like the prior methodology, the accelerated-testing methodology involves dynamic fatigue ( constant stress-rate) testing, in which a load or a displacement is applied to a specimen at a constant rate. SCG parameters or life prediction parameters needed for designing components made of the same material as that of the specimen are calculated from the relationship between (1) the strength of the material as measured in the test and (2) the applied stress rate used in the test. Despite its simplicity and convenience, dynamic fatigue testing as practiced heretofore has one major drawback: it is extremely time-consuming, especially at low stress rates. The present accelerated methodology reduces the time needed to test a specimen at a given rate of applied load, stress, or displacement. Instead of starting the test from zero applied load or displacement as in the prior methodology, one preloads the specimen and increases the applied load at the specified rate (see Figure 1). One might expect the preload to alter the results of the test and indeed it does, but fortunately, it is possible to account for the effect of the preload in interpreting the results. The accounting is done by calculating the normalized strength (defined as the strength in the presence of preload the strength in the absence of preload) as a function of (1) the preloading factor (defined as the preload stress the strength in the absence of preload) and (2) a SCG parameter, denoted n, that is used in a power-law crack-speed formulation. Figure 2 presents numerical results from this theoretical calculation.

Adaptive Sensing and Fusion of Multi-Sensor Data and Historical Information

DTIC Science & Technology

2009-11-06

integrate MTL and semi-supervised learning into a single framework , thereby exploiting two forms of contextual information. A key new objective of the...this report we integrate MTL and semi-supervised learning into a single framework , thereby exploiting two forms of contextual information. A key new...process [8], denoted as X ∼ BeP (B), where B is a measure on Ω. If B is continuous, X is a Poisson process with intensity B and can be constructed as X = N

Assessing and simulation of membrane technology for modifying starchy wastewater treatment

NASA Astrophysics Data System (ADS)

Hedayati Moghaddam, Amin; Hazrati, Hossein; Sargolzaei, Javad; Shayegan, Jalal

2017-10-01

In this study, a hydrophilic polyethersulfone membrane was used to modify the expensive and low efficient conventional treatment method of wheat starch production that would result in a cleaner starch production process. To achieve a cleaner production, the efficiency of starch production was enhanced and the organic loading rate of wastewater that was discharged into treatment system was decreased, simultaneously. To investigate the membrane performance, the dependency of rejection factor and permeate flux on operative parameters such as temperature, flow rate, concentration, and pH of feed were studied. Response surface methodology (RSM) has been applied to arrange the experimental layout which reduced the number of experiments and also the interactions between the parameters were considered. The maximum achieved rejection factor and permeate flux were 97.5% and 2.42 L min-1 m-2, respectively. Furthermore, a fuzzy inference system was selected to model the non-linear relations between input and output variable which cannot easily explained by physical models. The best agreement between the experimental and predicted data for permeate flux was denoted by correlation coefficient index ( R 2) of 0.9752 and mean square error (MSE) of 0.0072 where defuzzification operator was center of rotation (centroid). Similarly, the maximum R 2 for rejection factor was 0.9711 where the defuzzification operator was mean of maxima (mom).

A Developmental Study of Conceptual, Semantic Differential, and Acoustical Dimensions as Encoding Categories in Short-Term Memory. Final Report.

ERIC Educational Resources Information Center

Pender, Nola J.

The purpose of this research was to investigate developmental changes in encoding processes. It attempted to determine the extent to which children of varying ages utilize semantic (denotative or connotative) and acoustical encoding categories in a short-term memory task. It appears to be a reasonable assumption that as associational hierarchies…

DNA breaks and end resection measured genome-wide by end sequencing | Center for Cancer Research

Cancer.gov

About the Cover The cover depicts a ribbon of DNA portrayed as a city skyline. The central gap in the landscape localizes to the precise site of the DNA break. The features surrounding the break denote the processing of DNA-end structures (end-resection) emanating from the break location. Cover artwork by Ethan Tyler, NIH. Abstract

Verbs in the lexicon: Why is hitting easier than breaking?

PubMed

McKoon, Gail; Love, Jessica

2011-11-01

Adult speakers use verbs in syntactically appropriate ways. For example, they know implicitly that the boy hit at the fence is acceptable but the boy broke at the fence is not. We suggest that this knowledge is lexically encoded in semantic decompositions. The decomposition for break verbs (e.g. crack, smash) is hypothesized to be more complex than that for hit verbs (e.g. kick, kiss). Specifically, the decomposition of a break verb denotes that "an entity changes state as the result of some external force" whereas the decomposition for a hit verb denotes only that "an entity potentially comes in contact with another entity." In this article, verbs of the two types were compared in a lexical decision experiment - Experiment 1 - and they were compared in sentence comprehension experiments with transitive sentences (e.g. the car hit the bicycle and the car broke the bicycle) - Experiments 2 and 3. In Experiment 1, processing times were shorter for the hit than the break verbs and in Experiments 2 and 3, processing times were shorter for the hit sentences than the break sentences, results that are in accord with the complexities of the postulated semantic decompositions.

Differential Global Positioning System (DGPS) for Flight Testing (Global Positioning System Differentiel (DGPS) pour les Essais en vol)

DTIC Science & Technology

2008-10-01

pseudorange measurement, ρi p denotes the geometric distance between the stations and satellite, dti denotes the receiver’s clock offsets, di p, denotes the...the DGPS data quality. For this purpose a number of over-sea flight legs were included in the trials. The ASHTECH DGPS altitude data output was both...12 where a short leg of a flight trial is represented (the full horizontal track is shown in Figure C-13). Figure C-12: Latitude Error (TANS – 3

A Modular Mixed Signal VLSI Design Approach for Digital Radar Applications

DTIC Science & Technology

2007-03-01

convenience, denote e−j 2π N nk by WN , so equation (2.2) becomes: X(k) = N−1∑ n=0 x(n)W knN , k = 0, 1, 2, ..., N − 1 (2.3) which can be expanded into... Speech , and Signal Processing, 1994. ICASSP-94., 1994 IEEE International Conference on, 3, 1994. 18. Soliman, Samir S. and Mandyam D. Srinath

40 CFR 80.1425 - Renewable Identification Numbers (RINs).

Code of Federal Regulations, 2012 CFR

2012-07-01

... follows: (1) D has the value of 3 to denote fuel categorized as cellulosic biofuel. (2) D has the value of... categorized as advanced biofuel. (4) D has the value of 6 to denote fuel categorized as renewable fuel. (5) D...

40 CFR 80.1425 - Renewable Identification Numbers (RINs).

Code of Federal Regulations, 2011 CFR

2011-07-01

... follows: (1) D has the value of 3 to denote fuel categorized as cellulosic biofuel. (2) D has the value of... categorized as advanced biofuel. (4) D has the value of 6 to denote fuel categorized as renewable fuel. (5) D...

40 CFR 80.1425 - Renewable Identification Numbers (RINs).

Code of Federal Regulations, 2010 CFR

2010-07-01

... follows: (1) D has the value of 3 to denote fuel categorized as cellulosic biofuel. (2) D has the value of... categorized as advanced biofuel. (4) D has the value of 6 to denote fuel categorized as renewable fuel. (5) D...

40 CFR 80.1425 - Renewable Identification Numbers (RINs).

Code of Federal Regulations, 2014 CFR

2014-07-01

... follows: (1) D has the value of 3 to denote fuel categorized as cellulosic biofuel. (2) D has the value of... categorized as advanced biofuel. (4) D has the value of 6 to denote fuel categorized as renewable fuel. (5) D...

40 CFR 80.1425 - Renewable Identification Numbers (RINs).

Code of Federal Regulations, 2013 CFR

2013-07-01

... follows: (1) D has the value of 3 to denote fuel categorized as cellulosic biofuel. (2) D has the value of... categorized as advanced biofuel. (4) D has the value of 6 to denote fuel categorized as renewable fuel. (5) D...

Anaphoric Descriptions

ERIC Educational Resources Information Center

Beller, Charley

2013-01-01

The study of definite descriptions has been a central part of research in linguistics and philosophy of language since Russell's seminal work "On Denoting" (Russell 1905). In that work Russell quickly dispatches analyses of denoting expressions with forms like "no man," "some man," "a man," and "every…

Complex Waves on 1D, 2D, and 3D Periodic Arrays of Lossy and Lossless Magnetodielectric Spheres

DTIC Science & Technology

2010-05-16

magnetic) dipole field. The radius of the spheres is denoted by a, and t he relative permittivity and permeability of the spheres are denoted by fr and...1-’" respectively, where fr and I-’r are in general complex. We denote the separation between the centers of adjacent spheres by d, take the z axis...fT and JJ.’i-ff become reciprocals) , both (~fT and J.’’i- fr should approach the value of + 1. However, a little t.hought and numerical examples

Effect of template in MCM-41 on the adsorption of aniline from aqueous solution.

PubMed

Yang, Xinxin; Guan, Qingxin; Li, Wei

2011-11-01

The effect of the surfactant template cetyltrimethylammonium bromide (CTAB) in MCM-41 on the adsorption of aniline was investigated. Various MCM-41 samples were prepared by controlling template removal using an extraction method. The samples were then used as adsorbents for the removal of aniline from aqueous solution. The results showed that the MCM-41 samples with the template partially removed (denoted as C-MCM-41) exhibited better adsorption performance than MCM-41 with the template completely removed (denoted as MCM-41). The reason for this difference may be that the C-MCM-41 samples had stronger hydrophobic properties and selectivity for aniline because of the presence of the template. The porosity and cationic sites generated by the template play an important role in the adsorption process. The optimal adsorbent with moderate template was achieved by changing the ratio of extractant; it has the potential for promising applications in the field of water pollution control. Copyright © 2011 Elsevier Ltd. All rights reserved.

The impact and determinants of the energy paradigm on economic growth in European Union.

PubMed

Andrei, Jean Vasile; Mieila, Mihai; Panait, Mirela

2017-01-01

Contemporary economies are strongly reliant on energy and analyzing the determining factors that trigger the changes in energy paradigm and their impact upon economic growth is a topical research subject. Our contention is that energy paradigm plays a major role in achieving the sustainable development of contemporary economies. In order to prove this the panel data methodology of research was employed, namely four panel unit root tests (LLC, IPS, F-ADF and F-PP) aiming to reveal the connections and relevance among 17 variables denoting energy influence on economic development. Moreover, it was introduced a specific indicator to express energy consumption per capita. Our findings extend the classical approach of the changes in energy paradigm and their impact upon economic growth and offer a comprehensive analysis which surpasses the practices and policy decisions in the field.

Children's knowledge of the earth: a new methodological and statistical approach.

PubMed

Straatemeier, Marthe; van der Maas, Han L J; Jansen, Brenda R J

2008-08-01

In the field of children's knowledge of the earth, much debate has concerned the question of whether children's naive knowledge-that is, their knowledge before they acquire the standard scientific theory-is coherent (i.e., theory-like) or fragmented. We conducted two studies with large samples (N=328 and N=381) using a new paper-and-pencil test, denoted the EARTH (EArth Representation Test for cHildren), to discriminate between these two alternatives. We performed latent class analyses on the responses to the EARTH to test mental models associated with these alternatives. The naive mental models, as formulated by Vosniadou and Brewer, were not supported by the results. The results indicated that children's knowledge of the earth becomes more consistent as children grow older. These findings support the view that children's naive knowledge is fragmented.

The Early Impact of an Administrative Processing Fee on Manuscript Submissions at The Journal of Bone & Joint Surgery.

PubMed

Nwachukwu, Benedict U; Schairer, William W; So, Conan; Bernstein, Jaime L; Herndon, James; Dodwell, Emily R

2016-10-05

There was a dramatic increase in the volume of manuscripts submitted to The Journal of Bone & Joint Surgery (JBJS) between 2009 and 2012. This resulted in increased journal administrative costs. To offset this financial burden, in May 2013, JBJS started charging authors an administrative processing fee at the time of submission. The purpose of this study was to assess the impact of the administrative fee on the volume and characteristics of manuscripts submitted to JBJS. Our analysis included 866 manuscripts submitted to JBJS between November 2012 and November 2013. We compared manuscripts submitted 6 months prior to fee implementation and prior to the announcement (denoted as the baseline group), in the several months prior to fee implementation but after the fee implementation announcement (denoted as the fee announcement group), and in the 6 months after fee implementation (denoted as the fee implementation group). Manuscripts were reviewed for institutional and author demographic characteristics, as well as for general study characteristics. In the first full calendar year (2014) after the implementation of the fee, the annual volume of submissions to JBJS declined by 33.5% compared with the annual submission volume in 2010 to 2012. In a comparative analysis, the geographical region of origin (p = 0.003), level of evidence (p < 0.0001), funding, and specialty differed between the 3 submission periods. However, subgroup analyses demonstrated that differences were attributable to the fee announcement group and that there were few important differences between the baseline and fee implementation groups. Reporting of funding information improved significantly between the baseline and fee implementation groups; in the post-fee implementation period, studies were more likely to have declared no external funding source (p = 0.001). The administrative processing fee at JBJS has been associated with a decrease in submission volume, but, overall, there has not been a change in the characteristics of studies submitted. However, decreased overall volume implies a decrease in the absolute number of high-level studies submitted to the journal. Administrative processing fees at high-volume journals may be a financially viable way to offset high administrative costs without substantially changing the characteristics of submitted articles. Copyright © 2016 by The Journal of Bone and Joint Surgery, Incorporated.

Acute Stressor Effects on Goal-Directed Action in Rats

ERIC Educational Resources Information Center

Braun, Stephanie; Hauber, Wolfgang

2013-01-01

Here we examined effects of acute stressors that involve either systemic coadministration of corticosterone/yohimbine (3 mg/kg each) to increase glucocorticoid/noradrenaline activity (denoted as "pharmacological" stressor) or one or several distinct restraint stressors (denoted as "single" vs. "multiple" stressor) on…

Polyimide-Foam/Aerogel Composites for Thermal Insulation

NASA Technical Reports Server (NTRS)

Williams, Martha; Fesmire, James; Sass, Jared; Smith, Trent; Weoser. Erol

2009-01-01

Composites of specific types of polymer foams and aerogel particles or blankets have been proposed to obtain thermal insulation performance superior to those of the neat polyimide foams. These composites have potential to also provide enhanced properties for vibration dampening or acoustic attenuation. The specific type of polymer foam is denoted "TEEK-H", signifying a series, denoted H, within a family of polyimide foams that were developed at NASA s Langley Research Center and are collectively denoted TEEK (an acronym of the inventors names). The specific types of aerogels include Nanogel aerogel particles from Cabot Corporation in Billerica, MA. and of Spaceloft aerogel blanket from Aspen Aerogels in Northborough, MA. The composites are inherently flame-retardant and exceptionally thermally stable. There are numerous potential uses for these composites, at temperatures from cryogenic to high temperatures, in diverse applications that include aerospace vehicles, aircraft, ocean vessels, buildings, and industrial process equipment. Some low-temperature applications, for example, include cryogenic storage and transfer or the transport of foods, medicines, and chemicals. Because of thermal cycling, aging, and weathering most polymer foams do not perform well at cryogenic temperatures and will undergo further cracking over time. The TEEK polyimides are among the few exceptions to this pattern, and the proposed composites are intended to have all the desirable properties of TEEK-H foams, plus improved thermal performance along with enhanced vibration or acoustic-attenuation performance. A composite panel as proposed would be fabricated by adding an appropriate amount of TEEK friable balloons into a mold to form a bottom layer. A piece of flexible aerogel blanket material, cut to the desired size and shape, would then be placed on the bottom TEEK layer and sandwiched between another top layer of polyimide friable balloons so that the aerogel blanket would become completely encased in an outer layer of TEEK friable balloons. Optionally, the process could be further repeated to produce multiple aerogel-blanket layers interspersed with and encased by TEEK friable balloons.

Performance Comparison of Superresolution Array Processing Algorithms. Revised

DTIC Science & Technology

1998-06-15

plane waves is finite is the MUSIC algorithm [16]. MUSIC , which denotes Multiple Signal Classification, is an extension of the method of Pisarenko [18... MUSIC Is but one member of a class of methods based upon the decomposition of covariance data into eigenvectors and eigenvalues. Such techniques...techniques relative to the classical methods, however, results for MUSIC are included in this report. All of the techniques reviewed have application to

Spontaneity and Equilibrium: Why "?G < 0 Denotes a Spontaneous Process" and "?G = 0 Means the System Is at Equilibrium" Are Incorrect

ERIC Educational Resources Information Center

Raff, Lionel M.

2014-01-01

The fundamental criteria for chemical reactions to be spontaneous in a given direction are generally incorrectly stated as ?G < 0 or ?A < 0 in most introductory chemistry textbooks and even in some more advanced texts. Similarly, the criteria for equilibrium are also misstated as being ?G = 0 or ?A = 0. Following a brief review of the…

Receptive Fields and the Reconstruction of Visual Information.

DTIC Science & Technology

1985-09-01

depending on the noise . Thus our model would suggest that the interpolation filters for deblurring are playing a role in Ii hyperacuity. This is novel...of additional precision in the information can be obtained by a process of deblurring , which could be relevant to hyperacuity. It also provides an... impulse of heat diffuses into increasingly larger Gaussian distributions as time proceeds. Mathematically, let f(x) denote the initial temperature

6th Annual National Small Business Conference

DTIC Science & Technology

2009-06-03

Extension Partnership – MIT Lean Advancement Initiative – Customers • Lean Tools – Value Stream Mapping – Kaizen Events Center for Management...Blue denotes kaizen events Most suppliers did not have in-house lean capability therefore the OEM and customer facilitated the events 36 Center for...Management & Economic Research 37 Kaizen Events • Kaizen is the process of: – Identifying & eliminating waste – as quickly as possible – at the

Nanometrization of Lanthanide-Based Coordination Polymers.

PubMed

Neaime, Chrystelle; Daiguebonne, Carole; Calvez, Guillaume; Freslon, Stéphane; Bernot, Kevin; Grasset, Fabien; Cordier, Stéphane; Guillou, Olivier

2015-11-23

Heteronuclear lanthanide-based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare-earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non-toxic polyols. Bulk powders of the formula [Ln2-2x Ln'2x (bdc)3 ⋅4 H2 O]∞ (where H2 bdc denotes 1,4-benzene-dicarboxylic acid, 0≤x≤1, and Ln and Ln' denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light-scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide-based coordination polymers. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

77 FR 2829 - Energy Conservation Program: Test Procedure for Television Sets

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

... provisions designed to improve energy efficiency. (All references to EPCA refer to the statute as amended... also provides that the test procedure shall be reasonably designed to produce test results which... facility one is denoted with numerical values, while the data from test facility two is denoted with...

18 CFR 1.102 - Words denoting number, gender and so forth.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Words denoting number, gender and so forth. 1.102 Section 1.102 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES OF GENERAL APPLICABILITY Definitions and...

18 CFR 1.102 - Words denoting number, gender and so forth.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Words denoting number, gender and so forth. 1.102 Section 1.102 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES OF GENERAL APPLICABILITY Definitions and...

18 CFR 1.102 - Words denoting number, gender and so forth.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Words denoting number, gender and so forth. 1.102 Section 1.102 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES OF GENERAL APPLICABILITY Definitions and...

18 CFR 1.102 - Words denoting number, gender and so forth.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Words denoting number, gender and so forth. 1.102 Section 1.102 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES OF GENERAL APPLICABILITY Definitions and...

UAV and Computer Vision in 3D Modeling of Cultural Heritage in Southern Italy

NASA Astrophysics Data System (ADS)

Barrile, Vincenzo; Gelsomino, Vincenzo; Bilotta, Giuliana

2017-08-01

On the Waterfront Italo Falcomatà of Reggio Calabria you can admire the most extensive tract of the walls of the Hellenistic period of ancient city of Rhegion. The so-called Greek Walls are one of the most significant and visible traces of the past linked to the culture of Ancient Greece in the site of Reggio Calabria territory. Over the years this stretch of wall has always been a part, to the reconstruction of Reggio after the earthquake of 1783, the outer walls at all times, restored countless times, to cope with the degradation of the time and the adjustments to the technical increasingly innovative and sophisticated siege. They were the subject of several studies on history, for the study of the construction techniques and the maintenance and restoration of the same. This note describes the methodology for the implementation of a three-dimensional model of the Greek Walls conducted by the Geomatics Laboratory, belonging to DICEAM Department of University “Mediterranea” of Reggio Calabria. 3D modeling we made is based on imaging techniques, such as Digital Photogrammetry and Computer Vision, by using a drone. The acquired digital images were then processed using commercial software Agisoft PhotoScan. The results denote the goodness of the technique used in the field of cultural heritage, attractive alternative to more expensive and demanding techniques such as laser scanning.

Hybrid imaging: Instrumentation and Data Processing

NASA Astrophysics Data System (ADS)

Cal-Gonzalez, Jacobo; Rausch, Ivo; Shiyam Sundar, Lalith K.; Lassen, Martin L.; Muzik, Otto; Moser, Ewald; Papp, Laszlo; Beyer, Thomas

2018-05-01

State-of-the-art patient management frequently requires the use of non-invasive imaging methods to assess the anatomy, function or molecular-biological conditions of patients or study subjects. Such imaging methods can be singular, providing either anatomical or molecular information, or they can be combined, thus, providing "anato-metabolic" information. Hybrid imaging denotes image acquisitions on systems that physically combine complementary imaging modalities for an improved diagnostic accuracy and confidence as well as for increased patient comfort. The physical combination of formerly independent imaging modalities was driven by leading innovators in the field of clinical research and benefited from technological advances that permitted the operation of PET and MR in close physical proximity, for example. This review covers milestones of the development of various hybrid imaging systems for use in clinical practice and small-animal research. Special attention is given to technological advances that helped the adoption of hybrid imaging, as well as to introducing methodological concepts that benefit from the availability of complementary anatomical and biological information, such as new types of image reconstruction and data correction schemes. The ultimate goal of hybrid imaging is to provide useful, complementary and quantitative information during patient work-up. Hybrid imaging also opens the door to multi-parametric assessment of diseases, which will help us better understand the causes of various diseases that currently contribute to a large fraction of healthcare costs.

A note on subtrees rooted along the primary path of a binary tree

USGS Publications Warehouse

Troutman, B.M.; Karlinger, M.R.

1993-01-01

Let Fn denote the set of rooted binary plane trees with n external nodes, for given T???Fn let ui(T) be the altitude i node along the primary path of T, and let ??i(T) denote the number of external nodes in the induced subtree rooted at ui(T). We set ??i(T) = 0 if i is greater than the length of the primary path of T. We prove limn?????? ???i???x/n En{??i}/???i

Defining and Measuring Spirituality in South African Specialist Psychiatry.

PubMed

Janse van Rensburg, A B R; Poggenpoel, M; Myburgh, C P H; Szabo, C P

2015-10-01

To define the meaning of "spirituality" in a South African phenomenological, theory-generating qualitative inquiry, theory construction methodology was used. This refers to the tradition of nursing theory development, where a central core concept identified from the integrated data-in this case, interviews and the literature content-had to be defined. A major focus of the study was to distinguish spirituality from religion. The denotative and connotative meanings of "spirituality" were explored to establish the components for a definition. The attributes of this definition included that spirituality constitutes a "quality", a "journey", a "relationship" as well as a "capacity". While these items derived from this local definition of spirituality can be proposed for inclusion in a questionnaire for measuring spirituality in a South African context, the limits of the scope of the explorative qualitative inquiry from which it was derived must be considered.

The impact and determinants of the energy paradigm on economic growth in European Union

PubMed Central

Mieila, Mihai; Panait, Mirela

2017-01-01

Contemporary economies are strongly reliant on energy and analyzing the determining factors that trigger the changes in energy paradigm and their impact upon economic growth is a topical research subject. Our contention is that energy paradigm plays a major role in achieving the sustainable development of contemporary economies. In order to prove this the panel data methodology of research was employed, namely four panel unit root tests (LLC, IPS, F-ADF and F-PP) aiming to reveal the connections and relevance among 17 variables denoting energy influence on economic development. Moreover, it was introduced a specific indicator to express energy consumption per capita. Our findings extend the classical approach of the changes in energy paradigm and their impact upon economic growth and offer a comprehensive analysis which surpasses the practices and policy decisions in the field. PMID:28301505

Unipacs: A Language Arts Curriculum Theory, Abstractions, Statements in Context, and Language Change; And Instructional Packets: Symbol-Referent, Denotation and Connotation, Appropriateness, Dialect, Occasion, and Form and Media.

ERIC Educational Resources Information Center

Madison Public Schools, WI.

Based on the belief that the most appropriate focus of a language arts curriculum is the process and content of communication, these several unipacs (instructional packets) explore some essential elements of communication which should be incorporated into a curricular theory: (1) abstraction , which is the assertion that words may be classified as…

Alloys For Corrosive, Hydrogen-Rich Environments

NASA Technical Reports Server (NTRS)

Mcpherson, William B.; Bhat, Biliyar N.; Chen, Po-Shou; Kuruvilla, A. K.; Panda, Binayak

1993-01-01

"NASA-23" denotes class of alloys resisting both embrittlement by hydrogen and corrosion. Weldable and castable and formed by such standard processes as rolling, forging, and wire drawing. Heat-treated to obtain desired combinations of strength and ductility in ranges of 100 to 180 kpsi yield strength, 120 to 200 kpsi ultimate tensile strength, and 10 to 30 percent elongation at break. Used in place of most common aerospace structural alloy, Inconel(R) 718.

Signal Feature Analysis Using Neural Networks & Psychoacoustics

DTIC Science & Technology

1993-05-01

large class file on the DAT recording . This processing produced signals which ranged in length from 13200 and 39650 points. The extractions produced ... recorded . This signal set, denoted as "Air" signals , lacked the parameter of angle but added the parameter of striker (metal, plastic, and wood...the subjects were recorded . These became r.4 w data for confusion matrices which described how often a subject confused the class of a signal

The Suffix "-oso" in Central American Spanish.

ERIC Educational Resources Information Center

Scavnicky, Gary Eugene A.

1982-01-01

Examines the lexical formative "-oso," which is added to nominal and verbal roots to form adjectives to denote possession of the quality contained in the primitive, in Central American Spanish. Concludes it is used with traditional Spanish denotations and has undergone various semantic shifts and is being applied to roots in a completely…

18 CFR 1.102 - Words denoting number, gender and so forth.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., gender and so forth. 1.102 Section 1.102 Conservation of Power and Water Resources FEDERAL ENERGY... Rules of Construction § 1.102 Words denoting number, gender and so forth. In determining the meaning of...) Words of one gender include the other gender. [Order 225, 47 FR 19022, May 3, 1982] ...

The MIMIC Method with Scale Purification for Detecting Differential Item Functioning

ERIC Educational Resources Information Center

Wang, Wen-Chung; Shih, Ching-Lin; Yang, Chih-Chien

2009-01-01

This study implements a scale purification procedure onto the standard MIMIC method for differential item functioning (DIF) detection and assesses its performance through a series of simulations. It is found that the MIMIC method with scale purification (denoted as M-SP) outperforms the standard MIMIC method (denoted as M-ST) in controlling…

Metastability of Reversible Random Walks in Potential Fields

NASA Astrophysics Data System (ADS)

Landim, C.; Misturini, R.; Tsunoda, K.

2015-09-01

Let be an open and bounded subset of , and let be a twice continuously differentiable function. Denote by the discretization of , , and denote by the continuous-time, nearest-neighbor, random walk on which jumps from to at rate . We examine in this article the metastable behavior of among the wells of the potential F.

Investigation of Large Scale Cortical Models on Clustered Multi-Core Processors

DTIC Science & Technology

2013-02-01

with the bias node ( gray ) denoted as ww and the weights associated with the remaining first layer nodes (black) denoted as W. In forming the overall...Implementation of RBF network on GPU Platform 3.5.1 The Cholesky decomposition algorithm We need to invert the matrix multiplication GTG to

On the ordinary quiver of the symmetric group over a field of characteristic 2

NASA Astrophysics Data System (ADS)

Martin, Stuart; Russell, Lee

1997-11-01

Let [fraktur S]n and [fraktur A]n denote the symmetric and alternating groups of degree n[set membership][open face N] respectively. Let p be a prime number and let F be an arbitrary field of characteristic p. We say that a partition of n is p-regular if no p (non-zero) parts of it are equal; otherwise we call it p-singular. Let S[lambda]F denote the Specht module corresponding to [lambda]. For [lambda] a p-regular partition of n let D[lambda]F denote the unique irreducible top factor of S[lambda]F. Denote by [Delta][lambda]F =D[lambda]F [downward arrow][fraktur A]n its restriction to [fraktur A]n. Recall also that, over F, the ordinary quiver of the modular group algebra FG is a finite directed graph defined as follows: the vertices are labelled by the set of all simple FG-modules, L1, [ctdot], Lr, and the number of arrows from Li to Lj equals dimFExtFG(Li, Lj). The quiver gives important information about the block structure of G.

Using Multi-Objective Genetic Programming to Synthesize Stochastic Processes

NASA Astrophysics Data System (ADS)

Ross, Brian; Imada, Janine

Genetic programming is used to automatically construct stochastic processes written in the stochastic π-calculus. Grammar-guided genetic programming constrains search to useful process algebra structures. The time-series behaviour of a target process is denoted with a suitable selection of statistical feature tests. Feature tests can permit complex process behaviours to be effectively evaluated. However, they must be selected with care, in order to accurately characterize the desired process behaviour. Multi-objective evaluation is shown to be appropriate for this application, since it permits heterogeneous statistical feature tests to reside as independent objectives. Multiple undominated solutions can be saved and evaluated after a run, for determination of those that are most appropriate. Since there can be a vast number of candidate solutions, however, strategies for filtering and analyzing this set are required.

On the Computation of Optimal Designs for Certain Time Series Models with Applications to Optimal Quantile Selection for Location or Scale Parameter Estimation.

DTIC Science & Technology

1981-07-01

process is observed over all of (0,1], the reproducing kernel Hilbert space (RKHS) techniques developed by Parzen (1961a, 1961b) 2 may be used to construct...covariance kernel,R, for the process (1.1) is the reproducing kernel for a reproducing kernel Hilbert space (RKHS) which will be denoted as H(R) (c.f...2.6), it is known that (c.f. Eubank, Smith and Smith (1981a, 1981b)), i) H(R) is a Hilbert function space consisting of functions which satisfy for fEH

Observation of the helicity-selection-rule suppressed decay of the χc 2 charmonium state

NASA Astrophysics Data System (ADS)

Ablikim, M.; Achasov, M. N.; Ahmed, S.; Ai, X. C.; Albayrak, O.; Albrecht, M.; Ambrose, D. J.; Amoroso, A.; An, F. F.; An, Q.; Bai, J. Z.; Bakina, O.; Baldini Ferroli, R.; Ban, Y.; Bennett, D. W.; Bennett, J. V.; Berger, N.; Bertani, M.; Bettoni, D.; Bian, J. M.; Bianchi, F.; Boger, E.; Boyko, I.; Briere, R. A.; Cai, H.; Cai, X.; Cakir, O.; Calcaterra, A.; Cao, G. F.; Cetin, S. A.; Chai, J.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, J. C.; Chen, M. L.; Chen, S.; Chen, S. J.; Chen, X.; Chen, X. R.; Chen, Y. B.; Chu, X. K.; Cibinetto, G.; Dai, H. L.; Dai, J. P.; Dbeyssi, A.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Destefanis, M.; de Mori, F.; Ding, Y.; Dong, C.; Dong, J.; Dong, L. Y.; Dong, M. Y.; Dou, Z. L.; Du, S. X.; Duan, P. F.; Fan, J. Z.; Fang, J.; Fang, S. S.; Fang, X.; Fang, Y.; Farinelli, R.; Fava, L.; Feldbauer, F.; Felici, G.; Feng, C. Q.; Fioravanti, E.; Fritsch, M.; Fu, C. D.; Gao, Q.; Gao, X. L.; Gao, Y.; Gao, Z.; Garzia, I.; Goetzen, K.; Gong, L.; Gong, W. X.; Gradl, W.; Greco, M.; Gu, M. H.; Gu, Y. T.; Guan, Y. H.; Guo, A. Q.; Guo, L. B.; Guo, R. P.; Guo, Y.; Guo, Y. P.; Haddadi, Z.; Hafner, A.; Han, S.; Hao, X. Q.; Harris, F. A.; He, K. L.; Heinsius, F. H.; Held, T.; Heng, Y. K.; Holtmann, T.; Hou, Z. L.; Hu, C.; Hu, H. M.; Hu, T.; Hu, Y.; Huang, G. S.; Huang, J. S.; Huang, X. T.; Huang, X. Z.; Huang, Z. L.; Hussain, T.; Ikegami Andersson, W.; Ji, Q.; Ji, Q. P.; Ji, X. B.; Ji, X. L.; Jiang, L. W.; Jiang, X. S.; Jiang, X. Y.; Jiao, J. B.; Jiao, Z.; Jin, D. P.; Jin, S.; Johansson, T.; Julin, A.; Kalantar-Nayestanaki, N.; Kang, X. L.; Kang, X. S.; Kavatsyuk, M.; Ke, B. C.; Kiese, P.; Kliemt, R.; Kloss, B.; Kolcu, O. B.; Kopf, B.; Kornicer, M.; Kupsc, A.; Kühn, W.; Lange, J. S.; Lara, M.; Larin, P.; Leithoff, H.; Leng, C.; Li, C.; Li, Cheng; Li, D. M.; Li, F.; Li, F. Y.; Li, G.; Li, H. B.; Li, H. J.; Li, J. C.; Li, Jin; Li, K.; Li, K.; Li, Lei; Li, P. R.; Li, Q. Y.; Li, T.; Li, W. D.; Li, W. G.; Li, X. L.; Li, X. N.; Li, X. Q.; Li, Y. B.; Li, Z. B.; Liang, H.; Liang, Y. F.; Liang, Y. T.; Liao, G. R.; Lin, D. X.; Liu, B.; Liu, B. J.; Liu, C. X.; Liu, D.; Liu, F. H.; Liu, Fang; Liu, Feng; Liu, H. B.; Liu, H. H.; Liu, H. H.; Liu, H. M.; Liu, J.; Liu, J. B.; Liu, J. P.; Liu, J. Y.; Liu, K.; Liu, K. Y.; Liu, L. D.; Liu, P. L.; Liu, Q.; Liu, S. B.; Liu, X.; Liu, Y. B.; Liu, Y. Y.; Liu, Z. A.; Liu, Zhiqing; Loehner, H.; Long, Y. F.; Lou, X. C.; Lu, H. J.; Lu, J. G.; Lu, Y.; Lu, Y. P.; Luo, C. L.; Luo, M. X.; Luo, T.; Luo, X. L.; Lyu, X. R.; Ma, F. C.; Ma, H. L.; Ma, L. L.; Ma, M. M.; Ma, Q. M.; Ma, T.; Ma, X. N.; Ma, X. Y.; Ma, Y. M.; Maas, F. E.; Maggiora, M.; Malik, Q. A.; Mao, Y. J.; Mao, Z. P.; Marcello, S.; Messchendorp, J. G.; Mezzadri, G.; Min, J.; Min, T. J.; Mitchell, R. E.; Mo, X. H.; Mo, Y. J.; Morales Morales, C.; Muchnoi, N. Yu.; Muramatsu, H.; Musiol, P.; Nefedov, Y.; Nerling, F.; Nikolaev, I. B.; Ning, Z.; Nisar, S.; Niu, S. L.; Niu, X. Y.; Olsen, S. L.; Ouyang, Q.; Pacetti, S.; Pan, Y.; Patteri, P.; Pelizaeus, M.; Peng, H. P.; Peters, K.; Pettersson, J.; Ping, J. L.; Ping, R. G.; Poling, R.; Prasad, V.; Qi, H. R.; Qi, M.; Qian, S.; Qiao, C. F.; Qin, L. Q.; Qin, N.; Qin, X. S.; Qin, Z. H.; Qiu, J. F.; Rashid, K. H.; Redmer, C. F.; Ripka, M.; Rong, G.; Rosner, Ch.; Ruan, X. D.; Sarantsev, A.; Savrié, M.; Schnier, C.; Schoenning, K.; Shan, W.; Shao, M.; Shen, C. P.; Shen, P. X.; Shen, X. Y.; Sheng, H. Y.; Song, W. M.; Song, X. Y.; Sosio, S.; Spataro, S.; Sun, G. X.; Sun, J. F.; Sun, S. S.; Sun, X. H.; Sun, Y. J.; Sun, Y. Z.; Sun, Z. J.; Sun, Z. T.; Tang, C. J.; Tang, X.; Tapan, I.; Thorndike, E. H.; Tiemens, M.; Uman, I.; Varner, G. S.; Wang, B.; Wang, B. L.; Wang, D.; Wang, D. Y.; Wang, K.; Wang, L. L.; Wang, L. S.; Wang, M.; Wang, P.; Wang, P. L.; Wang, W.; Wang, W. P.; Wang, X. F.; Wang, Y.; Wang, Y. D.; Wang, Y. F.; Wang, Y. Q.; Wang, Z.; Wang, Z. G.; Wang, Z. H.; Wang, Z. Y.; Wang, Z. Y.; Weber, T.; Wei, D. H.; Weidenkaff, P.; Wen, S. P.; Wiedner, U.; Wolke, M.; Wu, L. H.; Wu, L. J.; Wu, Z.; Xia, L.; Xia, L. G.; Xia, Y.; Xiao, D.; Xiao, H.; Xiao, Z. J.; Xie, Y. G.; Xie, Y. H.; Xiu, Q. L.; Xu, G. F.; Xu, J. J.; Xu, L.; Xu, Q. J.; Xu, Q. N.; Xu, X. P.; Yan, L.; Yan, W. B.; Yan, W. C.; Yan, Y. H.; Yang, H. J.; Yang, H. X.; Yang, L.; Yang, Y. X.; Ye, M.; Ye, M. H.; Yin, J. H.; You, Z. Y.; Yu, B. X.; Yu, C. X.; Yu, J. S.; Yuan, C. Z.; Yuan, Y.; Yuncu, A.; Zafar, A. A.; Zeng, Y.; Zeng, Z.; Zhang, B. X.; Zhang, B. Y.; Zhang, C. C.; Zhang, D. H.; Zhang, H. H.; Zhang, H. Y.; Zhang, J.; Zhang, J. J.; Zhang, J. L.; Zhang, J. Q.; Zhang, J. W.; Zhang, J. Y.; Zhang, J. Z.; Zhang, K.; Zhang, L.; Zhang, S. Q.; Zhang, X. Y.; Zhang, Y.; Zhang, Y.; Zhang, Y. H.; Zhang, Y. N.; Zhang, Y. T.; Zhang, Yu; Zhang, Z. H.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, G.; Zhao, J. W.; Zhao, J. Y.; Zhao, J. Z.; Zhao, Lei; Zhao, Ling; Zhao, M. G.; Zhao, Q.; Zhao, Q. W.; Zhao, S. J.; Zhao, T. C.; Zhao, Y. B.; Zhao, Z. G.; Zhemchugov, A.; Zheng, B.; Zheng, J. P.; Zheng, W. J.; Zheng, Y. H.; Zhong, B.; Zhou, L.; Zhou, X.; Zhou, X. K.; Zhou, X. R.; Zhou, X. Y.; Zhu, K.; Zhu, K. J.; Zhu, S.; Zhu, S. H.; Zhu, X. L.; Zhu, Y. C.; Zhu, Y. S.; Zhu, Z. A.; Zhuang, J.; Zotti, L.; Zou, B. S.; Zou, J. H.; Besiii Collaboration

2017-12-01

The decays of χc 2→K+K-π0, KSK±π∓, and π+π-π0 are studied with the ψ (3686 ) data samples collected with the Beijing Spectrometer (BESIII). For the first time, the branching fractions of χc 2→K*K ¯, χc 2→a2±(1320 )π∓/a20(1320 )π0 , and χc 2→ρ (770 )±π∓ are measured. Here, K*K ¯ denotes both K*±K∓ and its isospin-conjugated process K*0K¯ 0+c .c . , and K* denotes the resonances K*(892 ), K2*(1430 ), and K3*(1780 ). The observations indicate a strong violation of the helicity selection rule in χc 2 decays into vector and pseudoscalar meson pairs. The measured branching fractions of χc 2→K*(892 )K ¯ are more than ten times larger than the upper limit of χc 2→ρ (770 )±π∓, which is so far the first direct observation of a significant U -spin symmetry breaking effect in charmonium decays.

Transformation of OODT CAS to Perform Larger Tasks

NASA Technical Reports Server (NTRS)

Mattmann, Chris; Freeborn, Dana; Crichton, Daniel; Hughes, John; Ramirez, Paul; Hardman, Sean; Woollard, David; Kelly, Sean

2008-01-01

A computer program denoted OODT CAS has been transformed to enable performance of larger tasks that involve greatly increased data volumes and increasingly intensive processing of data on heterogeneous, geographically dispersed computers. Prior to the transformation, OODT CAS (also alternatively denoted, simply, 'CAS') [wherein 'OODT' signifies 'Object-Oriented Data Technology' and 'CAS' signifies 'Catalog and Archive Service'] was a proven software component used to manage scientific data from spaceflight missions. In the transformation, CAS was split into two separate components representing its canonical capabilities: file management and workflow management. In addition, CAS was augmented by addition of a resource-management component. This third component enables CAS to manage heterogeneous computing by use of diverse resources, including high-performance clusters of computers, commodity computing hardware, and grid computing infrastructures. CAS is now more easily maintainable, evolvable, and reusable. These components can be used separately or, taking advantage of synergies, can be used together. Other elements of the transformation included addition of a separate Web presentation layer that supports distribution of data products via Really Simple Syndication (RSS) feeds, and provision for full Resource Description Framework (RDF) exports of metadata.

A Lifetime Measurement of the Exclusive Charged and Neutral B Meson States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cammerata, Jeffrey Donald

1996-01-01

This thesis reports a measurement of the charged and neutral B lifetimes using the decay modes B → ΨK where B symbolizes B u or B d, Ψ denotes J/Ψ or Ψ(2S), and K denotes K Kmore » $$0\\atop{s}$$, or K* (892).« less

On Fibonacci Numbers Which Are Elliptic Korselt Numbers

DTIC Science & Technology

2014-11-17

1, where (a|p) denotes the Legendre symbol of a with respect to p, then the order of group of points on E modulo p denoted #E(Fp), equals p+1. In...Fibonacci sequence, polynomials and the Euler function”, Indag. Math. (N.S.) 17 (2006), 611–625. [8] F. Luca and I. E. Shparlinski, “On the counting

Body Schematics: On the Role of the Body Schema in Embodied Lexical-Semantic Representations

ERIC Educational Resources Information Center

Rueschemeyer, Shirley-Ann; Pfeiffer, Christian; Bekkering, Harold

2010-01-01

Words denoting manipulable objects activate sensorimotor brain areas, likely reflecting action experience with the denoted objects. In particular, these sensorimotor lexical representations have been found to reflect the way in which an object is used. In the current paper we present data from two experiments (one behavioral and one neuroimaging)…

77 FR 34463 - Endangered and Threatened Wildlife and Plants; Listing 38 Species on Molokai, Lanai, and Maui as...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... section 4 of the Endangered Species Act of 1973, as amended (Act) (16 U.S.C. 1531 et seq.), including...'' denotes endangered status under the Act; ``C'' denotes a species currently on the candidate list... Endangered Plants: Bidens campylotheca ssp. kookoolau Proposed--Endangered Proposed. pentamera. (C). Bidens...

75 FR 22586 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of General...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... asterisks, or wild cards, denote color or other features that do not affect energy performance.) DOE notes...****, ZFGP21HZ****. The asterisks, or wild cards, denote color or other features that do not affect energy performance. GE incorporates herein the original humidity sensor waiver petition and has attached the petition...

Relational Learning in a Context of Transposition: A Review

ERIC Educational Resources Information Center

Lazareva, Olga F.

2012-01-01

In a typical transposition task, an animal is presented with a single pair of stimuli (for example, S3+S4-, where plus and minus denote reward and nonreward and digits denote stimulus location on a sensory dimension such as size). Subsequently, an animal is presented with a testing pair that contains a previously reinforced or nonreinforced…

78 FR 11154 - Large Residential Washers From the Republic of Korea: Countervailing Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... externally mounted steel frame at least six inches high that is designed to house a coin/token operated... ``stacked washer-dryers'' denotes distinct washing and drying machines that are built on a unitary frame and... of steel and is assembled with security fasteners;\\8\\ or \\7\\ ``Payment system electronics'' denotes a...

Identification of Ischemic Regions in a Rat Model of Stroke

PubMed Central

Popp, Anke; Jaenisch, Nadine; Witte, Otto W.; Frahm, Christiane

2009-01-01

Background Investigations following stroke first of all require information about the spatio-temporal dimension of the ischemic core as well as of perilesional and remote affected tissue. Here we systematically evaluated regions differently impaired by focal ischemia. Methodology/Principal Findings Wistar rats underwent a transient 30 or 120 min suture-occlusion of the middle cerebral artery (MCAO) followed by various reperfusion times (2 h, 1 d, 7 d, 30 d) or a permanent MCAO (1 d survival). Brains were characterized by TTC, thionine, and immunohistochemistry using MAP2, HSP72, and HSP27. TTC staining reliably identifies the infarct core at 1 d of reperfusion after 30 min MCAO and at all investigated times following 120 min and permanent MCAO. Nissl histology denotes the infarct core from 2 h up to 30 d after transient as well as permanent MCAO. Absent and attenuated MAP2 staining clearly identifies the infarct core and perilesional affected regions at all investigated times, respectively. HSP72 denotes perilesional areas in a limited post-ischemic time (1 d). HSP27 detects perilesional and remote impaired tissue from post-ischemic day 1 on. Furthermore a simultaneous expression of HSP72 and HSP27 in perilesional neurons was revealed. Conclusions/Significance TTC and Nissl staining can be applied to designate the infarct core. MAP2, HSP72, and HSP27 are excellent markers not only to identify perilesional and remote areas but also to discriminate affected neuronal and glial populations. Moreover markers vary in their confinement to different reperfusion times. The extent and consistency of infarcts increase with prolonged occlusion of the MCA. Therefore interindividual infarct dimension should be precisely assessed by the combined use of different markers as described in this study. PMID:19274095

Supporting the Virtual Soldier With a Physics-Based Software Architecture

DTIC Science & Technology

2005-06-01

simple approach taken here). Rather, this paper demonstrates how existing solution schemes can rapidly expand; it embraces all theoretical solution... bodyj . In (5) the superscript ’T’ accompanying a vector denotes the transposition of the vector. The constraint force and moment are defined as F C=Z1 a a...FE codes as there are meshes, and the requested MD code. This is described next. Exactly how the PM instantiated each physics process became an issue

Analysis of dengue fever risk using geostatistics model in bone regency

NASA Astrophysics Data System (ADS)

Amran, Stang, Mallongi, Anwar

2017-03-01

This research aim is to analysis of dengue fever risk based on Geostatistics model in Bone Regency. Risk levels of dengue fever are denoted by parameter of Binomial distribution. Effect of temperature, rainfalls, elevation, and larvae abundance are investigated through Geostatistics model. Bayesian hierarchical method is used in estimation process. Using dengue fever data in eleven locations this research shows that temperature and rainfall have significant effect of dengue fever risk in Bone regency.

Photoinduced Reductive Elimination of H2 from the Nitrogenase Dihydride (Janus) State Involves a FeMo-cofactor-H2 Intermediate.

PubMed

Lukoyanov, Dmitriy; Khadka, Nimesh; Dean, Dennis R; Raugei, Simone; Seefeldt, Lance C; Hoffman, Brian M

2017-02-20

N 2 reduction by nitrogenase involves the accumulation of four reducing equivalents at the active site FeMo-cofactor to form a state with two [Fe-H-Fe] bridging hydrides (denoted E 4 (4H), the Janus intermediate), and we recently demonstrated that the enzyme is activated to cleave the N≡N triple bond by the reductive elimination (re) of H 2 from this state. We are exploring a photochemical approach to obtaining atomic-level details of the re activation process. We have shown that, when E 4 (4H) at cryogenic temperatures is subjected to 450 nm irradiation in an EPR cavity, it cleanly undergoes photoinduced re of H 2 to give a reactive doubly reduced intermediate, denoted E 4 (2H)*, which corresponds to the intermediate that would form if thermal dissociative re loss of H 2 preceded N 2 binding. Experiments reported here establish that photoinduced re primarily occurs in two steps. Photolysis of E 4 (4H) generates an intermediate state that undergoes subsequent photoinduced conversion to [E 4 (2H)* + H 2 ]. The experiments, supported by DFT calculations, indicate that the trapped intermediate is an H 2 complex on the ground adiabatic potential energy suface that connects E 4 (4H) with [E 4 (2H)* + H 2 ]. We suggest that this complex, denoted E 4 (H 2 ; 2H), is a thermally populated intermediate in the catalytically central re of H 2 by E 4 (4H) and that N 2 reacts with this complex to complete the activated conversion of [E 4 (4H) + N 2 ] into [E 4 (2N2H) + H 2 ].

Photoinduced Reductive Elimination of H 2 from the Nitrogenase Dihydride (Janus) State Involves a FeMo-cofactor-H 2 Intermediate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lukoyanov, Dmitriy; Khadka, Nimesh; Dean, Dennis R.

N2 reduction by nitrogenase involves the accumulation of four reducing equivalents at the active site FeMo-cofactor to form a state with two [Fe-H-Fe] bridging hydrides (denoted E4(4H), the Janus intermediate), and we recently demonstrated that the enzyme is activated to cleave the N≡N triple bond by the reductive elimination (re) of H2 from this state. We are exploring a photochemical approach to obtaining atomic-level details of the re activation process. We have shown that when E4(4H) at cryogenic temperatures is subjected to 450 nm irradiation in an EPR cavity, it cleanly undergoes photoinduced re of H2 to give a reactivemore » doubly-reduced intermediate, denoted E4(2H)*, which corresponds to the intermediate that would form if thermal dissociative re loss of H2 preceded N2 binding. Experiments reported here establish that photoinduced re occurs in two steps. Photolysis of E4(4H) generates an intermediate state that undergoes subsequent photoinduced conversion to [E4(2H)* + H2]. The experiments, supported by DFT calculation, indicate that the trapped intermediate is an H2 complex on the ground adiabatic potential energy suface that connects E4(4H) with [E4(2H)* + H2]. We suggest this complex, denoted E4(H2; 2H), is a thermally populated intermediate in the catalytically central re of H2 by E4(4H), and that N2 reacts with this complex to complete the activated conversion of [E4(4H) + N2] into [E4(2N2H) + H2].« less

Liquid phase catalytic hydrodebromination of tetrabromobisphenol A on supported Pd catalysts

NASA Astrophysics Data System (ADS)

Wu, Ke; Zheng, Mengjia; Han, Yuxiang; Xu, Zhaoyi; Zheng, Shourong

2016-07-01

Tetrabromobisphenol A (TBBPA) is a widely used brominated flame retardant and reductive debromination is an effective method for the abatement of TBBPA pollution. In this study, Pd catalysts supported on TiO2, CeO2, Al2O3 and SiO2 were prepared by the impregnation (the resulting catalyst denoted as im-Pd/support), deposition-precipitation (the resulting catalyst denoted as dp-Pd/support), and photo-deposition (the resulting catalyst denoted as pd-Pd/support) methods. The catalysts were characterized by N2 adsorption-desorption isotherm, X-ray diffraction, transmission electron microscopy, measurement of zeta potential, CO chemisorption, and X-ray photoelectron spectroscopy. The results showed that at an identical Pd loading amount (2.0 wt.%) Pd particle size in dp-Pd/TiO2 was much smaller than those in im-Pd/TiO2 and pd-Pd/TiO2. Pd particle size of the dp-Pd/TiO2 catalyst increased with Pd loading amount. Additionally, Pd particles in the dp-Pd/TiO2 catalysts were positively charged due to the strong metal-support interaction, whereas the cationization effect was gradually attenuated with the increase of Pd loading amount. For the liquid phase catalytic hydrodebromination (HDB) of TBBPA, tri-bromobisphenol A (tri-BBPA), di-bromobisphenol A (di-BBPA), and mono-bromobisphenol A (mono-BBPA) were identified as the intermediate products, indicative of a stepwise debromination process. The catalytic HDB of TBBPA followed the Langmuir-Hinshelwood model, reflecting an adsorption enhanced catalysis mechanism. At an identical Pd loading amount, the Pd catalyst supported on TiO2 exhibited a much higher catalytic activity than those on other supports. Furthermore, dp-Pd/TiO2 was found to be more active than im-Pd/TiO2 and pd-Pd/TiO2.

Sol-Gel Process for Making Pt-Ru Fuel-Cell Catalysts

NASA Technical Reports Server (NTRS)

Narayanan, Sekharipuram; Valdez, Thomas; Kumta, Prashant; Kim, Y.

2005-01-01

A sol-gel process has been developed as a superior alternative to a prior process for making platinum-ruthenium alloy catalysts for electro-oxidation of methanol in fuel cells. The starting materials in the prior process are chloride salts of platinum and ruthenium. The process involves multiple steps, is time-consuming, and yields a Pt-Ru product that has relatively low specific surface area and contains some chloride residue. Low specific surface area translates to incomplete utilization of the catalytic activity that might otherwise be available, while chloride residue further reduces catalytic activity ("poisons" the catalyst). In contrast, the sol-gel process involves fewer steps and less time, does not leave chloride residue, and yields a product of greater specific area and, hence, greater catalytic activity. In this sol-gel process (see figure), the starting materials are platinum(II) acetylacetonate [Pt(C5H7O2)2, also denoted Pt-acac] and ruthenium(III) acetylacetonate [Ru(C5H7O2)3, also denoted Ru-acac]. First, Pt-acac and Ru-acac are dissolved in acetone at the desired concentrations (typically, 0.00338 moles of each salt per 100 mL of acetone) at a temperature of 50 C. A solution of 25 percent tetramethylammonium hydroxide [(CH3)4NOH, also denoted TMAH] in methanol is added to the Pt-acac/Ruacac/ acetone solution to act as a high-molecular-weight hydrolyzing agent. The addition of the TMAH counteracts the undesired tendency of Pt-acac and Ru-acac to precipitate as separate phases during the subsequent evaporation of the solvent, thereby helping to yield a desired homogeneous amorphous gel. The solution is stirred for 10 minutes, then the solvent is evaporated until the solution becomes viscous, eventually transforming into a gel. The viscous gel is dried in air at a temperature of 170 C for about 10 hours. The dried gel is crushed to make a powder that is the immediate precursor of the final catalytic product. The precursor powder is converted to the final product in a controlled-atmosphere heat treatment. Desirably, the final product is a phase-pure (Pt phase only) Pt-Ru powder with a high specific surface area. The conditions of the controlled- atmosphere heat are critical for obtaining the aforementioned desired properties. A typical heat treatment that yields best results for a catalytic alloy of equimolar amounts of Pt and Ru consists of at least two cycles of heating to a temperature of 300 C and holding at 300 C for several hours, all carried out in an atmosphere of 1 percent O2 and 99 percent N2. The resulting powder consists of crystallites with typical linear dimensions of <10 nm. Tests have shown that the powder is highly effective in catalyzing the electro-oxidation of methanol.

77 FR 75988 - Notice of Final Determination of Sales at Less Than Fair Value: Large Residential Washers From...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... externally mounted steel frame at least six inches high that is designed to house a coin/token operated... washer-dryers'' denotes distinct washing and drying machines that are built on a unitary frame and share... of steel and is assembled with security fasteners;\\7\\ or \\6\\ ``Payment system electronics'' denotes a...

77 FR 76288 - Notice of Final Determination of Sales at Less Than Fair Value: Large Residential Washers from...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-27

... externally mounted steel frame at least six inches high that is designed to house a coin/token operated... ``stacked washer-dryers'' denotes distinct washing and drying machines that are built on a unitary frame and... of steel and is assembled with security fasteners;\\7\\ or \\6\\ ``Payment system electronics'' denotes a...

Simultaneous Surface Modification and Chemical Reduction of Graphene Oxide Using Glucose.

PubMed

Pan, Hui; Liu, Ruiqi; Li, Guanglong; Wang, Xiaodong; Ding, Tao

2018-05-01

In this paper, we develop a simple and facile approach to prepare graphene nanosheets through chemical reduction with glucose as reducing agent and modification agent. The reduced and modified graphene by glucose (denoted as g-rGO) was characterized with techniques of Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectra, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), etc. It is found that, besides the desired reduction capability to graphene oxide (denoted as GO), glucose plays an important role as a modifying reagent in stabilizing the as-prepared graphene nanosheets simultaneously and the g-rGO exhibits good dispersibility and stability in water and waterborne polyurethane matrix (denoted as WPU). Moreover, the g-rGO can improve evidently the mechanical properties, weather ability and water resistance of WPU.

Decision Support Tools for Munitions Response Performance Prediction and Risk Assessment

DTIC Science & Technology

2016-09-01

then given by m̂ = ( GTG )−1GTdobs = G†dobs (6) with (7) G† = ( GTG )−1GT denoting the pseudo-inverse. In this formulation, the model vector at location r...estimate for observed data dobs as m̂ = ( GTG )−1GTdobs = G†dobs (3) with G† = ( GTG )−1GT denoting the pseudo-inverse. The dependence of G on the estimated

Digitally Controlled Analog Signal Processing

DTIC Science & Technology

1988-04-01

each analog switch. The third is the parasiti - capacitance at the output (the capacitor side) of each analog switch. This last is of concern only when a...21) where fk (x) tf H(wk) -H(wk) for k = 1, 2,... n, and x denotes the vector containing n-+ I transfer function coefficients, a, a2 ,... am, and bl...b2, .... bt that are non-zero. We wish to solve this system of equations for x, the vector of unknown transfer function coefficients. The modified

Proceedings of the Conference on the Design of Experiments in Army Research Development and Testing (32nd)

DTIC Science & Technology

1987-06-01

number of series among the 63 which were identified as a particular ARIMA form and were "best" modeled by a particular technique. Figure 1 illustrates a...th time from xe’s. The integrbted autoregressive - moving average model , denoted by ARIMA (p,d,q) is a result of combining d-th differencing process...Experiments, (4) Data Analysis and Modeling , (5) Theory and Probablistic Inference, (6) Fuzzy Statistics, (7) Forecasting and Prediction, (8) Small Sample

The Effect of Nitrogen and Titanium on the Toughness of High Strength Saw Weld Deposits

DTIC Science & Technology

1989-05-12

2.3 CCT diagram for typical SAW steel welds [8]. 26 Figure 2.4 Oxygen and nitrogen levels expected from several arc 31 welding processes [10]. Figure...alloyed ferritic weld metal such formation is achieved if the CCT diagram is displaced towards longer times. However, it is worth noting that too large...dilution and cooling rate [5]. In this context, the CCT diagram is often used to denote the transformations that occur in weld metal samples which

Restoration algorithms for imaging through atmospheric turbulence

DTIC Science & Technology

2017-02-18

the Fourier spectrum of each frame. The reconstructed image is then obtained by taking the inverse Fourier transform of the average of all processed...with wipξq “ Gσp|Fpviqpξq|pq řM j“1Gσp|Fpvjqpξq|pq , where F denotes the Fourier transform (ξ are the frequencies) and Gσ is a Gaussian filter of...a combination of SIFT [26] and ORSA [14] algorithms) in order to remove affine transformations (translations, rotations and homothety). The authors

Understanding Enterprise Systems' Impact(s) on Business Relationships

NASA Astrophysics Data System (ADS)

Ekman, Peter; Thilenius, Peter

Enterprise systems (ESs), i.e. standardized applications supplied from software vendors such as SAP or Oracle, have been extensively employed by companies during the last decade. Today all Fortune 500 companies have, or are in the process of installing, this kind of information system (Seddon et al. 2003). A wide-spread denotation for these applications is enterprise resource planning (ERP) systems. But the broad utilization use of these software packages in business is rendering this labelling too narrow (Davenport 2000).

Preparation, characterization and application of dispersible and spherical Nano-SiO2@Copolymer nanocomposite in leather tanning

NASA Astrophysics Data System (ADS)

Pan, Hui; Li, Guang-Long; Liu, Rui-Qi; Wang, Su-Xia; Wang, Xiao-Dong

2017-12-01

Dispersible and spherical silica nanoparticles (nano-SiO2) were prepared with tetraethyl silicate and different surface-modifiers via a simple method. The silica nanoparticles surface-modified with methacryloxy (propyl) trimethoxysilane (denoted as MPS-SiO2), dimethyl diallyl ammoniumchloride (denoted as DMDAAC-SiO2) and poly (methacrylic acid) (denoted as PMAA-SiO2) which are known as hydrophobic, amphiphilic and hydrophilic modifiers, respectively, exhibited excellent dispersibility in various solvents or polymer matrix. The obtained bare silica nanoparticles, MPS-SiO2, DMDAAC-SiO2 and PMAA-SiO2 were characterized by Fourier transform infrared spectra (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and scanning electron microscope (SEM). A series of nanocomposites (denoted as SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P and PMAA-SiO2/P, respectively) were also prepared with the bare or surface-modified silica nanoparticles and methacrylic acid-co-acrylamide-co-acrylonitrile-co-salicylic acid tetrabasic copolymer (denoted as PMAAS) and applied in leather tanning. Compared with those of the leather tanned with the commercial acrylic resin (CHINATAN OM) and pure tetrabasic copolymer tanning agents, the physical and mechanical properties, rheological properties and thermal stabilities of the leather treated with SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P or PMAA-SiO2/P founded to be improved in a significant way. Moreover, the highest shrinkage temperature of the wet-white sheepskin tanned with PMAA-SiO2/P reached to 76 °C and the thickness increase reached to 105%.

High Order Numerical Methods for the Investigation of the Two Dimensional Richtmyer-Meshkov Instability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Don, W-S; Gotllieb, D; Shu, C-W

2001-11-26

For flows that contain significant structure, high order schemes offer large advantages over low order schemes. Fundamentally, the reason comes from the truncation error of the differencing operators. If one examines carefully the expression for the truncation error, one will see that for a fixed computational cost that the error can be made much smaller by increasing the numerical order than by increasing the number of grid points. One can readily derive the following expression which holds for systems dominated by hyperbolic effects and advanced explicitly in time: flops = const * p{sup 2} * k{sup (d+1)(p+1)/p}/E{sup (d+1)/p} where flopsmore » denotes floating point operations, p denotes numerical order, d denotes spatial dimension, where E denotes the truncation error of the difference operator, and where k denotes the Fourier wavenumber. For flows that contain structure, such as turbulent flows or any calculation where, say, vortices are present, there will be significant energy in the high values of k. Thus, one can see that the rate of growth of the flops is very different for different values of p. Further, the constant in front of the expression is also very different. With a low order scheme, one quickly reaches the limit of the computer. With the high order scheme, one can obtain far more modes before the limit of the computer is reached. Here we examine the application of spectral methods and the Weighted Essentially Non-Oscillatory (WENO) scheme to the Richtmyer-Meshkov Instability. We show the intricate structure that these high order schemes can calculate and we show that the two methods, though very different, converge to the same numerical solution indicating that the numerical solution is very likely physically correct.« less

The Photoconversion of Phytochrome Includes an Unproductive Shunt Reaction Pathway.

PubMed

Buhrke, David; Kuhlmann, Uwe; Michael, Norbert; Hildebrandt, Peter

2018-03-05

Phytochromes are modular bimodal photoswitches that control gene expression for morphogenetic processes in plants. These functions are triggered by photoinduced conversions between the inactive and active states of the photosensory module, denoted as Pr and Pfr, respectively. In the present time-resolved resonance Raman spectroscopic study of bacterial representatives of this photoreceptor family, we demonstrate that these phototransformations do not represent linear processes but include a branching reaction back to the initial state, prior to (de)activation of the output module. Thus, only a fraction of the photoreceptors undergoing the phototransformations can initiate the downstream signaling process, consistent with phytochrome's function as a sensor for more durable changes of light conditions. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Synergy Model at Work in a Military ICU in Iraq

DTIC Science & Technology

2008-01-01

competency) and vulnerability (a patient characteristic ) are described for the care of an Arab female child with 45% burns from an improvised explosive...participation in care (a patient characteristic denoting engagement in as- pects of care) [1], and resiliency (a patient charac- teristic denoting the...her care that one could fully appreciate the synergistic relationship between linking the nurse competency of diversity and the patient characteristic of

Development of Advanced Constitutive Models for Plain and Reinforced Concrete.

DTIC Science & Technology

1986-04-01

V * . . . . .. .. ,.*,*..~.*,..*.*.*..*.*..~...*.,*. - -. .. . . d .. . . . . . . . . . ~ --. % S ...surface, Figure D .5, be denoted as [ v ( s )]. Further, let ef (i = 1 to 3) denote the unit orthogonal base vectors of a rectangular Cartesian reference system...astic parts according to d .. = de. d ?. ( D -2) ij Ij I j one obtains d ? =1 n + S ni [ v ( ] ( D -3) where s i • e n, n 9 e ( D -4) In the case of

PHLUX: Photographic Flux Tools for Solar Glare and Flux

DOE Office of Scientific and Technical Information (OSTI.GOV)

2010-12-02

A web-based tool to a) analytically and empirically quantify glare from reflected light and determine the potential impact (e.g., temporary flash blindness, retinal burn), and b) produce flux maps for central receivers. The tool accepts RAW digital photographs of the glare source (for hazard assessment) or the receiver (for flux mapping), as well as a photograph of the sun for intensity and size scaling. For glare hazard assessment, the tool determines the retinal irradiance (W/cm2) and subtended source angle for an observer and plots the glare source on a hazard spectrum (i.e., low-potential for flash blindness impact, potential for flashmore » blindness impact, retinal burn). For flux mapping, the tool provides a colored map of the receiver scaled by incident solar flux (W/m2) and unwraps the physical dimensions of the receiver while accounting for the perspective of the photographer (e.g., for a flux map of a cylindrical receiver, the horizontal axis denotes receiver angle in degrees and the vertical axis denotes vertical position in meters; for a flat panel receiver, the horizontal axis denotes horizontal position in meters and the vertical axis denotes vertical position in meters). The flux mapping capability also allows the user to specify transects along which the program plots incident solar flux on the receiver.« less

Understanding measurement in light of its origins.

PubMed

Humphry, Stephen

2013-01-01

During the course of history, the natural sciences have seen the development of increasingly convenient short-hand symbolic devices for denoting physical quantities. These devices ultimately took the form of physical algebra. However, the convenience of algebra arguably came at a cost - a loss of the clarity of direct insights by Euclid, Galileo, and Newton into natural quantitative relations. Physical algebra is frequently interpreted as ordinary algebra; i.e., it is interpreted as though symbols denote (a) numbers and operations on numbers, as opposed to (b) physical quantities and quantitative relations. The paper revisits the way in which Newton understood and expressed physical definitions and laws. Accordingly, it reviews a compact form of notation that has been used to denote both: (a) ratios of physical quantities; and (b) compound ratios, involving two or more kinds of quantity. The purpose is to show that it is consistent with historical developments to regard physical algebra as a device for denoting relations among ratios. Understood in the historical context, the objective of measurement is to establish that a physical quantity stands in a specific ratio to another quantity of the same kind. To clarify the meaning of measurement in terms of the historical origins of physics carries basic implications for the way in which measurement is understood and approached. Possible implications for the social sciences are considered.

Observation of the helicity-selection-rule suppressed decay of the χ c 2 charmonium state

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ablikim, M.; Achasov, M. N.; Ahmed, S.

Tmore » he decays of χ c 2 → K +K -π 0, K SK ±π ∓, and π +π -π 0 are studied with the ψ ( 3686 ) data samples collected with the Beijing Spectrometer (BESIII). For the first time, the branching fractions of χ c 2 → K*$$\\bar{K}$$ , χ c 2 → $$a_2^±$$(1320)π ∓/$$a_2^0$$(1320)π 0, and χ c 2 → ρ( 770 ) ±π ∓ are measured. Here, K*$$\\bar{K}$$ denotes both K* ±K ∓ and its isospin-conjugated process K* 0$$\\bar{K}$$ 0+c.c., and K* denotes the resonances K*(892), $$K_2^*$$(1430), and $$K_3^*$$(1780). he observations indicate a strong violation of the helicity selection rule in χ c 2 decays into vector and pseudoscalar meson pairs. he measured branching fractions of χ c 2 → K*(892)$$\\bar{K}$$ are more than ten times larger than the upper limit of χ c 2 → ρ ( 770 ) ±π ∓, which is so far the first direct observation of a significant U -spin symmetry breaking effect in charmonium decays.« less

Observation of the helicity-selection-rule suppressed decay of the χ c 2 charmonium state

DOE PAGES

Ablikim, M.; Achasov, M. N.; Ahmed, S.; ...

2017-12-01

Tmore » he decays of χ c 2 → K +K -π 0, K SK ±π ∓, and π +π -π 0 are studied with the ψ ( 3686 ) data samples collected with the Beijing Spectrometer (BESIII). For the first time, the branching fractions of χ c 2 → K*$$\\bar{K}$$ , χ c 2 → $$a_2^±$$(1320)π ∓/$$a_2^0$$(1320)π 0, and χ c 2 → ρ( 770 ) ±π ∓ are measured. Here, K*$$\\bar{K}$$ denotes both K* ±K ∓ and its isospin-conjugated process K* 0$$\\bar{K}$$ 0+c.c., and K* denotes the resonances K*(892), $$K_2^*$$(1430), and $$K_3^*$$(1780). he observations indicate a strong violation of the helicity selection rule in χ c 2 decays into vector and pseudoscalar meson pairs. he measured branching fractions of χ c 2 → K*(892)$$\\bar{K}$$ are more than ten times larger than the upper limit of χ c 2 → ρ ( 770 ) ±π ∓, which is so far the first direct observation of a significant U -spin symmetry breaking effect in charmonium decays.« less

From master slave interferometry to complex master slave interferometry: theoretical work

NASA Astrophysics Data System (ADS)

Rivet, Sylvain; Bradu, Adrian; Maria, Michael; Feuchter, Thomas; Leick, Lasse; Podoleanu, Adrian

2018-03-01

A general theoretical framework is described to obtain the advantages and the drawbacks of two novel Fourier Domain Optical Coherence Tomography (OCT) methods denoted as Master/Slave Interferometry (MSI) and its extension denoted as Complex Master/Slave Interferometry (CMSI). Instead of linearizing the digital data representing the channeled spectrum before a Fourier transform can be applied to it (as in OCT standard methods), channeled spectrum is decomposed on the basis of local oscillations. This replaces the need for linearization, generally time consuming, before any calculation of the depth profile in the range of interest. In this model two functions, g and h, are introduced. The function g describes the modulation chirp of the channeled spectrum signal due to nonlinearities in the decoding process from wavenumber to time. The function h describes the dispersion in the interferometer. The utilization of these two functions brings two major improvements to previous implementations of the MSI method. The paper details the steps to obtain the functions g and h, and represents the CMSI in a matrix formulation that enables to implement easily this method in LabVIEW by using parallel programming with multi-cores.

Evolving rule-based systems in two medical domains using genetic programming.

PubMed

Tsakonas, Athanasios; Dounias, Georgios; Jantzen, Jan; Axer, Hubertus; Bjerregaard, Beth; von Keyserlingk, Diedrich Graf

2004-11-01

To demonstrate and compare the application of different genetic programming (GP) based intelligent methodologies for the construction of rule-based systems in two medical domains: the diagnosis of aphasia's subtypes and the classification of pap-smear examinations. Past data representing (a) successful diagnosis of aphasia's subtypes from collaborating medical experts through a free interview per patient, and (b) correctly classified smears (images of cells) by cyto-technologists, previously stained using the Papanicolaou method. Initially a hybrid approach is proposed, which combines standard genetic programming and heuristic hierarchical crisp rule-base construction. Then, genetic programming for the production of crisp rule based systems is attempted. Finally, another hybrid intelligent model is composed by a grammar driven genetic programming system for the generation of fuzzy rule-based systems. Results denote the effectiveness of the proposed systems, while they are also compared for their efficiency, accuracy and comprehensibility, to those of an inductive machine learning approach as well as to those of a standard genetic programming symbolic expression approach. The proposed GP-based intelligent methodologies are able to produce accurate and comprehensible results for medical experts performing competitive to other intelligent approaches. The aim of the authors was the production of accurate but also sensible decision rules that could potentially help medical doctors to extract conclusions, even at the expense of a higher classification score achievement.

Construction of Hybrid Supercapacitor-Batteries with dual-scale shelled architecture.

PubMed

Qian, Zhongyu; Peng, Tao; Wang, Jun; Qu, Liangti

2014-07-01

Pseudocapacitors bridge the gap between supercapacitors and batteries. Controllable microstructures grown on substrates have achieved success with regard to energy storage. However, traditional designs have only focused on the surface of scaffolds, which results in high specific capacitance values for the electroactive material rather than the electrodes. Inspired by slurry-casting, a dual-scale shell-structured NiCo2 O4 on nickel foam was assembled by using a simple and flexible solution-based strategy. First, NiCo2 O4 nanosheets covering the Ni foam skeleton surface loosely (the sample is denoted as 'pasted') is obtained by a solution-grown and 'dip-and-dry' process (in a cobalt-nickel hydroxide solution) followed by annealing. Secondly, the NiCo2 O4 nanosheets are filled in the pores of the Ni scaffold (the obtained material is denoted as 'tailored') through chemical bath deposition process followed by annealing. The capacitance per weight of electroactive materials is not outstanding (1029 F g(-1) at 10 mA cm(-2) ), but is competitive with regard to area (3.23 F cm(-2) at 10 mA cm(-2) ). However, features in the cycling performance imply that the electrode exhibits a hybrid supercapacitor-battery behavior and that thermodynamic hysteresis promotes the 'breaking' and 'fusing' behavior of the material. The overall design highlights a new pathway to step out from surface to space. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

On the usage of classical nucleation theory in quantification of the impact of bacterial INP on weather and climate

NASA Astrophysics Data System (ADS)

Sahyoun, Maher; Wex, Heike; Gosewinkel, Ulrich; Šantl-Temkiv, Tina; Nielsen, Niels W.; Finster, Kai; Sørensen, Jens H.; Stratmann, Frank; Korsholm, Ulrik S.

2016-08-01

Bacterial ice-nucleating particles (INP) are present in the atmosphere and efficient in heterogeneous ice-nucleation at temperatures up to -2 °C in mixed-phase clouds. However, due to their low emission rates, their climatic impact was considered insignificant in previous modeling studies. In view of uncertainties about the actual atmospheric emission rates and concentrations of bacterial INP, it is important to re-investigate the threshold fraction of cloud droplets containing bacterial INP for a pronounced effect on ice-nucleation, by using a suitable parameterization that describes the ice-nucleation process by bacterial INP properly. Therefore, we compared two heterogeneous ice-nucleation rate parameterizations, denoted CH08 and HOO10 herein, both of which are based on classical-nucleation-theory and measurements, and use similar equations, but different parameters, to an empirical parameterization, denoted HAR13 herein, which considers implicitly the number of bacterial INP. All parameterizations were used to calculate the ice-nucleation probability offline. HAR13 and HOO10 were implemented and tested in a one-dimensional version of a weather-forecast-model in two meteorological cases. Ice-nucleation-probabilities based on HAR13 and CH08 were similar, in spite of their different derivation, and were higher than those based on HOO10. This study shows the importance of the method of parameterization and of the input variable, number of bacterial INP, for accurately assessing their role in meteorological and climatic processes.

The CMC/3DPNS computer program for prediction of three-dimensional, subsonic, turbulent aerodynamic juncture region flow. Volume 3: Programmers' manual

NASA Technical Reports Server (NTRS)

Orzechowski, J. A.

1982-01-01

The CMC fluid mechanics program system was developed to transmit the theoretical evolution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. A detailed view of the code from the standpoint of a computer programmer's use is presented. A system macroflow chart and detailed flow charts of several routines necessary to interact with a theoretican/user to modify the operation of this program are presented. All subroutines and details of usage, primarily for input and output routines are described. Integer and real scalars and a cross reference list denoting subroutine usage for these scalars are outlined. Entry points in dynamic storage vector IZ; the lengths of each vector accompanying the scalar definitions are described. A listing of the routines peculiar to the standard test case and a listing of the input deck and printout for this case are included.

Scale structure: Processing Minimum Standard and Maximum Standard Scalar Adjectives

PubMed Central

Frazier, Lyn; Clifton, Charles; Stolterfoht, Britta

2008-01-01

Gradable adjectives denote a function that takes an object and returns a measure of the degree to which the object possesses some gradable property (Kennedy, 1999). Scales, ordered sets of degrees, have begun to be studied systematically in semantics (Kennedy, to appear, Kennedy & McNally, 2005, Rotstein & Winter, 2004). We report four experiments designed to investigate the processing of absolute adjectives with a maximum standard (e.g., clean) and their minimum standard antonyms (dirty). The central hypothesis is that the denotation of an absolute adjective introduces a ‘standard value’ on a scale as part of the normal comprehension of a sentence containing the adjective (the “Obligatory Scale” hypothesis). In line with the predictions of Kennedy and McNally (2005) and Rotstein and Winter (2004), maximum standard adjectives and minimum standard adjectives systematically differ from each other when they are combined with minimizing modifiers like slightly, as indicated by speeded acceptability judgments. An eye movement recording study shows that, as predicted by the Obligatory Scale hypothesis, the penalty due to combining slightly with a maximum standard adjective can be observed during the processing of the sentence; the penalty is not the result of some after-the-fact inferencing mechanism. Further, a type of ‘quantificational variability effect’ may be observed when a quantificational adverb (mostly) is combined with a minimum standard adjective in sentences like The dishes are mostly dirty, which may receive either a degree interpretation (e.g. 80% dirty) or a quantity interpretation (e.g., 80% of the dishes are dirty). The quantificational variability results provide suggestive support for the Obligatory Scale hypothesis by showing that the standard of a scalar adjective influences the preferred interpretation of other constituents in the sentence. PMID:17376422

A Note on the Application of the Extended Bernoulli Equation

DTIC Science & Technology

1999-02-01

as OV s ... - Vp „ _ = -±L L + VO , (2) Dt p where DIDt denotes the material derivative (discussed in following section); V is the vector...force potential; V is the vector gradient operator; s (J is the deviatoric-stress tensor arising from any type of elasto-viscoplastic constitutive...behavior; and s ^j is index notation for dsy/dxp denoting the following vector condensation of the deviatoric-stress tensor: ds ds ds

Infant Abusive Head Trauma in a Military Cohort

DTIC Science & Technology

2013-01-01

parent under whom the child is insured. b Enlisted personnel are denoted as “E”; higher numbers indicate a higher pay grade. 672 GUMBS et al to... parent under whom the child is insured. c Enlisted personnel are denoted as “E”; higher numbers indicate a higher pay grade. ARTICLE PEDIATRICS Volume...infants at the highest risk. Parental characteristics associated with AHT include stress, young age, and current military service. However, a

Formation of Ground Truth Databases and Related Studies and Regional Seismic Monitoring Research

DTIC Science & Technology

2006-06-01

denoted by black circles) and those derived by the combined use of both IRIS and revised IDC for all 70 Chinese events. Arrows point towards the...IRIS data provide a large number of additional Lg amvals. Figure 45. Differences in epicentral location between the original REB (denoted by black ...Washington, USA Haystack Fork , Wyoming, USA Hells Canyon, Colorado, USA Hiawatha Road, Colorado, USA Hockley, Texas, USA Hailey, Idaho, USA Honiara

Dissociative Recombination Chemistry and Plasma Dynamics

DTIC Science & Technology

2008-06-16

the fractional square of product momentum with product momentum vectors . Qx and Qy denote the degenerate bend two-body dissociation limits...with product momentum vectors . Qx and Qy denote the degenerate bend normal modes for C2v symmetry H2D and HD2 isomers of H3. symmetry for the Qx...heavy (D atom) products in general receive a greater partitioning of energy than the light product. This may have important implications for

Vision-Based UAV Flight Control and Obstacle Avoidance

DTIC Science & Technology

2006-01-01

denoted it by Vb = (Vb1, Vb2 , Vb3). Fig. 2 shows the block diagram of the proposed vision-based motion analysis and obstacle avoidance system. We denote...structure analysis often involve computation- intensive computer vision tasks, such as feature extraction and geometric modeling. Computation-intensive...First, we extract a set of features from each block. 2) Second, we compute the distance between these two sets of features. In conventional motion

Robust diamond-like Fe-Si network in the zero-strain Na xFeSiO 4 cathode

DOE PAGES

Ye, Zhuo; Zhao, Xin; Li, Shouding; ...

2016-07-14

Sodium orthosilicates Na 2 MSiO 4 ( M denotes transition metals) have attracted much attention due to the possibility of exchanging two electrons per formula unit. In this work, we report a group of sodium iron orthosilicates Na 2FeSiO 4. Their crystal structures are characterized by a diamond-like Fe-Si network. The Fe-Si network is quite robust against the charge/discharge process, which explains the high structural stability observed in experiment. Furthermore, using the density functional theory within the GGA + U framework and X-ray diffraction studies, the crystal structures and structural stabilities during the sodium extraction/re-insertion process are systematically investigated.

Side-Chain Liquid Crystalline Poly(meth)acrylates with Bent-Core Mesogens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen,X.; Tenneti, K.; Li, C.

2007-01-01

We report the design, synthesis, and characterization of side-chain liquid crystalline (LC) poly(meth)acrylates with end-on bent-core liquid crystalline (BCLC) mesogens. Both conventional free radical polymerization and atom transfer radical polymerization have been used to synthesize these liquid crystalline polymers (LCP). The resulting polymers exhibit thermotropic LC behavior. Differential scanning calorimetry, thermopolarized light microscopy, wide-angle X-ray diffraction, and small-angle X-ray scattering were used to characterize the LC structure of both monomers and polymers. The electro-optic (EO) measurement was carried out by applying a triangular wave and measuring the LC EO response. SmCP (Smectic C indicates the LC molecules are tilted withmore » respect to the layer normal; P denotes polar ordering) phases were observed for both monomers and polymers. In LC monomers, typical antiferroelectric switching was observed. In the ground state, SmCP{sub A} (A denotes antiferroelectric) was observed which switched to SmCP{sub F} (F denotes ferroelectric) upon applying an electric field. In the corresponding LCP, a unique bilayer structure was observed, which is different from the reported BCLC bilayer SmCG (G denotes generated) phase. Most of the LCPs did not switch upon applying electric field while weak AF switching was observed in a low molecular weight poly{l_brace}3'-[4-(4-n-dodecyloxybenzoyloxy)benzoyloxy]-4-(12-acryloyloxydodecyloxy)benzoyloxybiphenyl{r_brace} sample.« less

An Evaluation of the Air Force Institute of Technology Student Selection Criteria

DTIC Science & Technology

1989-09-01

total score on the GMAT TOEFL Student’s score on the Test of English as a Foreign Language • denotes an indicator variable 2( Criterion Variable The...students, scores on the TOEFL . Any other possible predictors were not chosen because they are not used in the student selection process and therefore would...GMATQ 722 32.66 6.46 11.00 54.00 GMATT 731 537.07 68.84 275.00 740.00 TOEFL 59 521.46 128.87 80.00 780.00 * Effective October 1,1981, the maximimum

The Journal of Physical Chemistry A. Time-Dependent Quantum Molecular Dynamics Workshop, Brian Head, Utah, March 13-17, 1999. Volume 103, Number 47

DTIC Science & Technology

1999-11-25

reactions the situation is more complicated since many of the modes are in the process of changing from free rotors to nearly harmonic bending motions ...are dihedral angles between the CH3 planes and the CC axis (see text). Heavy solid contours denote repulsive regions ( energies higher than that of...while vi is the source term describing the rate of formation of ethane in energy state i from the free methyl radicals. The effective bimolecular

Regional business cycle synchronization through expectations

NASA Astrophysics Data System (ADS)

Onozaki, Tamotsu; Yanagita, Tatsuo; Kaizoji, Taisei; Toyabe, Kazutaka

2007-09-01

This paper provides an example in which regional business cycles may synchronize via producers’ expectations, even though there is no interregional trade, by means of a system of globally coupled, noninvertible maps. We concentrate on the dependence of the dynamics on a parameter η which denotes the inverse of price elasticity of demand. Simulation results show that several phases (the short transient, the complete asynchronous, the long transient and the intermediate transient) appear one after another as η increases. In the long transient phase, the intermittent clustering process with a long chaotic transient appears repeatedly.

LGL1 modulates proliferation, apoptosis, and migration of human fetal lung fibroblasts.

PubMed

Zhang, Hui; Sweezey, Neil B; Kaplan, Feige

2015-02-15

Rapid growth and formation of new gas exchange units (alveogenesis) are hallmarks of the perinatal lung. Bronchopulmonary dysplasia (BPD), common in very premature infants, is characterized by premature arrest of alveogenesis. Mesenchymal cells (fibroblasts) regulate both lung branching and alveogenesis through mesenchymal-epithelial interactions. Temporal or spatial deficiency of late-gestation lung 1/cysteine-rich secretory protein LD2 (LGL1/CRISPLD2), expressed in and secreted by lung fibroblasts, can impair both lung branching and alveogenesis (LGL1 denotes late gestation lung 1 protein; LGL1 denotes the human gene; Lgl1 denotes the mouse/rat gene). Absence of Lgl1 is embryonic lethal. Lgl1 levels are dramatically reduced in oxygen toxicity rat models of BPD, and heterozygous Lgl1(+/-) mice exhibit features resembling human BPD. To explore the role of LGL1 in mesenchymal-epithelial interactions in developing lung, we developed a doxycycline (DOX)-inducible RNA-mediated LGL1 knockdown cellular model in human fetal lung fibroblasts (MRC5(LGL1KD)). We assessed the impact of LGL1 on cell proliferation, cell migration, apoptosis, and wound healing. DOX-induced MRC5(LGL1KD) suppressed cell growth and increased apoptosis of annexin V(+) staining cells and caspase 3/7 activity. LGL1-conditioned medium increased migration of fetal rat primary lung epithelial cells and human airway epithelial cells. Impaired healing by MRC5(LGL1KD) cells of a wound model was attenuated by addition of LGL1-conditioned medium. Suppression of LGL1 was associated with dysregulation of extracellular matrix genes (downregulated MMP1, ColXVα1, and ELASTIN) and proapoptosis genes (upregulated BAD, BAK, CASP2, and TNFRSF1B) and inhibition of 44/42MAPK phosphorylation. Our findings define a role for LGL1 in fibroblast expansion and migration, epithelial cell migration, and mesenchymal-epithelial signaling, key processes in fetal lung development. Copyright © 2015 the American Physiological Society.

Pathfinder 2: In Situ Design Cost Trades (IDCT) Tool

DTIC Science & Technology

2003-05-01

collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT...Cost Analysis box in the center of the figure is represented as an ICOM box where input, controls , output, and mechanisms are denoted on each of the...characteristics (e.g. mission profile, maintenance plan). All of these are received in some form from domain experts. Controls are denoted at the top of the

Medic - Chest Pain: A Decision Support Program for the Management of Acute Chest Pain (User’s Manual)

DTIC Science & Technology

1989-10-05

musculoskeletal chest pain; b) pleurisy ; c) pulmonary erbolus; d) mediastinal emphysema a) Musculoskeletal chest pain and the pain of costochondritis denote muscle...includes mild A-22 analgesics/anti-inflammatory drugs, heat therapy, and rest. b) Pleurisy denotes inflammation of the pleura. It may be seen in the...setting of bronchitis or pneumonia. The symptoms of both assist in differentiating pleurisy fru pneumothorax. In the absence of signs of pneumonia or

The Choice of Discount Rate Applicable to Government Resource Use: Theory and Limitations

DTIC Science & Technology

1987-12-01

print money , which necessarily makes government securities less risky to the individuals purchasing them than private securities are. This leads to a...the case of allocating a fixed initial sum of money over a T-period horizon. Let M denote the amount of money available for investment at time t - 0...amount of money available for government investment at 36 time t - 0 under a one-shot investment plan, and let r" denote the opportunity cost rate of

Bialgebra deformations and algebras of trees

NASA Technical Reports Server (NTRS)

Grossman, Robert; Radford, David

1991-01-01

Let A denote a bialgebra over a field k and let A sub t = A((t)) denote the ring of formal power series with coefficients in A. Assume that A is also isomorphic to a free, associative algebra over k. A simple construction is given which makes A sub t a bialgebra deformation of A. In typical applications, A sub t is neither commutative nor cocommutative. In the terminology of Drinfeld, (1987), A sub t is a quantum group. This construction yields quantum groups associated with families of trees.

Quadratic Hadamard Memories II. Adaptive Stochastic Content. Addressable Memory

DTIC Science & Technology

1990-07-01

No. 6429 Issued by Army Missile Command Under Contract # DAAH1-88-C-0887 D T IC Technical Report #2 E LEC SlD Approved for public release...integrate the N coupled nonlinear 0 differential equations, something I cannot do. In the proportional region these equations d 5 can be integrated in spite...is summed, but Uav a is not. Indices are used as follows. i, j, and k denote components in input space. a, b, c, d , and p denote components in the

Acoustic Metadata Management and Transparent Access to Networked Oceanographic Data Sets

DTIC Science & Technology

2011-09-30

Roberts in Pat Halpin’s lab, integrating the Marine Geospatial Ecology (GeoEco) toolset into our database services. While there is a steep...noise bands. The lower box at each site denotes the 1-6 kHz band while the upper box denotes 6-96 kHz band. Lad seamount has deployments at two sites...N00014-11-1-0697 http://cetus.ucsd.edu Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of

A new class of random processes with application to helicopter noise

NASA Technical Reports Server (NTRS)

Hardin, Jay C.; Miamee, A. G.

1989-01-01

The concept of dividing random processes into classes (e.g., stationary, locally stationary, periodically correlated, and harmonizable) has long been employed. A new class of random processes is introduced which includes many of these processes as well as other interesting processes which fall into none of the above classes. Such random processes are denoted as linearly correlated. This class is shown to include the familiar stationary and periodically correlated processes as well as many other, both harmonizable and non-harmonizable, nonstationary processes. When a process is linearly correlated for all t and harmonizable, its two-dimensional power spectral density S(x) (omega 1, omega 2) is shown to take a particularly simple form, being non-zero only on lines such that omega 1 to omega 2 = + or - r(k) where the r(k's) are (not necessarily equally spaced) roots of a characteristic function. The relationship of such processes to the class of stationary processes is examined. In addition, the application of such processes in the analysis of typical helicopter noise signals is described.

A new class of random processes with application to helicopter noise

NASA Technical Reports Server (NTRS)

Hardin, Jay C.; Miamee, A. G.

1989-01-01

The concept of dividing random processes into classes (e.g., stationary, locally stationary, periodically correlated, and harmonizable) has long been employed. A new class of random processes is introduced which includes many of these processes as well as other interesting processes which fall into none of the above classes. Such random processes are denoted as linearly correlated. This class is shown to include the familiar stationary and periodically correlated processes as well as many other, both harmonizable and non-harmonizable, nonstationary processes. When a process is linearly correlated for all t and harmonizable, its two-dimensional power spectral density S(x)(omega 1, omega 2) is shown to take a particularly simple form, being non-zero only on lines such that omega 1 to omega 2 = + or - r(k) where the r(k's) are (not necessarily equally spaced) roots of a characteristic function. The relationship of such processes to the class of stationary processes is examined. In addition, the application of such processes in the analysis of typical helicopter noise signals is described.

Influence of the ultrasound-assisted synthesis of Cu-BTC metal-organic frameworks nanoparticles on uptake and release properties of rifampicin.

PubMed

Abbasi, Amir Reza; Rizvandi, Maryam

2018-01-01

In this work, we study uptake and release properties of rifampicin (denoted henceforth as Rif) from ultrasound-assisted synthesis Cu-BTC nanoparticles in comparison with bulk Cu-BTC and activated carbon. To explore the absorption ability of the Cu-BTC to Rif, fresh sample of Cu-BTC was immersed in an aqueous solution of Rif and were monitored in real time with UV/vis spectroscopy. Results show that the adsorbed quantity of Rif over nano Cu-BTC (denoted henceforth as I) is much higher than those over a bulk Cu-BTC (denoted henceforth as II) and activated carbon. In compound I and all of the nano-MOFs the channel length is decreased so that the amount of adsorption is increased a little. The samples were characterized with X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and UV/vis spectroscopy. Copyright © 2017 Elsevier B.V. All rights reserved.

Word learning mechanisms.

PubMed

He, Angela Xiaoxue; Arunachalam, Sudha

2017-07-01

How do children acquire the meanings of words? Many word learning mechanisms have been proposed to guide learners through this challenging task. Despite the availability of rich information in the learner's linguistic and extralinguistic input, the word-learning task is insurmountable without such mechanisms for filtering through and utilizing that information. Different kinds of words, such as nouns denoting object concepts and verbs denoting event concepts, require to some extent different kinds of information and, therefore, access to different kinds of mechanisms. We review some of these mechanisms to examine the relationship between the input that is available to learners and learners' intake of that input-that is, the organized, interpreted, and stored representations they form. We discuss how learners segment individual words from the speech stream and identify their grammatical categories, how they identify the concepts denoted by these words, and how they refine their initial representations of word meanings. WIREs Cogn Sci 2017, 8:e1435. doi: 10.1002/wcs.1435 This article is categorized under: Linguistics > Language Acquisition Psychology > Language. © 2017 Wiley Periodicals, Inc.

On Maximizing the Lifetime of Wireless Sensor Networks by Optimally Assigning Energy Supplies

PubMed Central

Asorey-Cacheda, Rafael; García-Sánchez, Antonio Javier; García-Sánchez, Felipe; García-Haro, Joan; Gonzalez-Castaño, Francisco Javier

2013-01-01

The extension of the network lifetime of Wireless Sensor Networks (WSN) is an important issue that has not been appropriately solved yet. This paper addresses this concern and proposes some techniques to plan an arbitrary WSN. To this end, we suggest a hierarchical network architecture, similar to realistic scenarios, where nodes with renewable energy sources (denoted as primary nodes) carry out most message delivery tasks, and nodes equipped with conventional chemical batteries (denoted as secondary nodes) are those with less communication demands. The key design issue of this network architecture is the development of a new optimization framework to calculate the optimal assignment of renewable energy supplies (primary node assignment) to maximize network lifetime, obtaining the minimum number of energy supplies and their node assignment. We also conduct a second optimization step to additionally minimize the number of packet hops between the source and the sink. In this work, we present an algorithm that approaches the results of the optimization framework, but with much faster execution speed, which is a good alternative for large-scale WSN networks. Finally, the network model, the optimization process and the designed algorithm are further evaluated and validated by means of computer simulation under realistic conditions. The results obtained are discussed comparatively. PMID:23939582

Functionally different PIN proteins control auxin flux during bulbil development in Agave tequilana

PubMed Central

Abraham Juárez, María Jazmín; Hernández Cárdenas, Rocío; Santoyo Villa, José Natzul; O’Connor, Devin; Sluis, Aaron; Hake, Sarah; Ordaz-Ortiz, José; Terry, Leon; Simpson, June

2015-01-01

In Agave tequilana, reproductive failure or inadequate flower development stimulates the formation of vegetative bulbils at the bracteoles, ensuring survival in a hostile environment. Little is known about the signals that trigger this probably unique phenomenon in agave species. Here we report that auxin plays a central role in bulbil development and show that the localization of PIN1-related proteins is consistent with altered auxin transport during this process. Analysis of agave transcriptome data led to the identification of the A. tequilana orthologue of PIN1 (denoted AtqPIN1) and a second closely related gene from a distinct clade reported as ‘Sister of PIN1’ (denoted AtqSoPIN1). Quantitative real-time reverse transcription–PCR (RT-qPCR) analysis showed different patterns of expression for each gene during bulbil formation, and heterologous expression of the A. tequilana PIN1 and SoPIN1 genes in Arabidopsis thaliana confirmed functional differences between these genes. Although no free auxin was detected in induced pedicel samples, changes in the levels of auxin precursors were observed. Taken as a whole, the data support the model that AtqPIN1 and AtqSoPIN1 have co-ordinated but distinct functions in relation to auxin transport during the initial stages of bulbil formation. PMID:25911746

Sound Symbolism in the Languages of Australia

PubMed Central

Haynie, Hannah; Bowern, Claire; LaPalombara, Hannah

2014-01-01

The notion that linguistic forms and meanings are related only by convention and not by any direct relationship between sounds and semantic concepts is a foundational principle of modern linguistics. Though the principle generally holds across the lexicon, systematic exceptions have been identified. These “sound symbolic” forms have been identified in lexical items and linguistic processes in many individual languages. This paper examines sound symbolism in the languages of Australia. We conduct a statistical investigation of the evidence for several common patterns of sound symbolism, using data from a sample of 120 languages. The patterns examined here include the association of meanings denoting “smallness” or “nearness” with front vowels or palatal consonants, and the association of meanings denoting “largeness” or “distance” with back vowels or velar consonants. Our results provide evidence for the expected associations of vowels and consonants with meanings of “smallness” and “proximity” in Australian languages. However, the patterns uncovered in this region are more complicated than predicted. Several sound-meaning relationships are only significant for segments in prominent positions in the word, and the prevailing mapping between vowel quality and magnitude meaning cannot be characterized by a simple link between gradients of magnitude and vowel F2, contrary to the claims of previous studies. PMID:24752356

On maximizing the lifetime of Wireless Sensor Networks by optimally assigning energy supplies.

PubMed

Asorey-Cacheda, Rafael; García-Sánchez, Antonio Javier; García-Sánchez, Felipe; García-Haro, Joan; González-Castano, Francisco Javier

2013-08-09

The extension of the network lifetime of Wireless Sensor Networks (WSN) is an important issue that has not been appropriately solved yet. This paper addresses this concern and proposes some techniques to plan an arbitrary WSN. To this end, we suggest a hierarchical network architecture, similar to realistic scenarios, where nodes with renewable energy sources (denoted as primary nodes) carry out most message delivery tasks, and nodes equipped with conventional chemical batteries (denoted as secondary nodes) are those with less communication demands. The key design issue of this network architecture is the development of a new optimization framework to calculate the optimal assignment of renewable energy supplies (primary node assignment) to maximize network lifetime, obtaining the minimum number of energy supplies and their node assignment. We also conduct a second optimization step to additionally minimize the number of packet hops between the source and the sink. In this work, we present an algorithm that approaches the results of the optimization framework, but with much faster execution speed, which is a good alternative for large-scale WSN networks. Finally, the network model, the optimization process and the designed algorithm are further evaluated and validated by means of computer simulation under realistic conditions. The results obtained are discussed comparatively.

Enhancing reproducibility: Failures from Reproducibility Initiatives underline core challenges.

PubMed

Mullane, Kevin; Williams, Michael

2017-08-15

Efforts to address reproducibility concerns in biomedical research include: initiatives to improve journal publication standards and peer review; increased attention to publishing methodological details that enable experiments to be reconstructed; guidelines on standards for study design, implementation, analysis and execution; meta-analyses of multiple studies within a field to synthesize a common conclusion and; the formation of consortia to adopt uniform protocols and internally reproduce data. Another approach to addressing reproducibility are Reproducibility Initiatives (RIs), well-intended, high-profile, systematically peer-vetted initiatives that are intended to replace the traditional process of scientific self-correction. Outcomes from the RIs reported to date have questioned the usefulness of this approach, particularly when the RI outcome differs from other independent self-correction studies that have reproduced the original finding. As a failed RI attempt is a single outcome distinct from the original study, it cannot provide any definitive conclusions necessitating additional studies that the RI approach has neither the ability nor intent of conducting making it a questionable replacement for self-correction. A failed RI attempt also has the potential to damage the reputation of the author of the original finding. Reproduction is frequently confused with replication, an issue that is more than semantic with the former denoting "similarity" and the latter an "exact copy" - an impossible outcome in research because of known and unknown technical, environmental and motivational differences between the original and reproduction studies. To date, the RI framework has negatively impacted efforts to improve reproducibility, confounding attempts to determine whether a research finding is real. Copyright © 2017 Elsevier Inc. All rights reserved.

Aerodynamic Design Using Neural Networks

NASA Technical Reports Server (NTRS)

Rai, Man Mohan; Madavan, Nateri K.

2003-01-01

The design of aerodynamic components of aircraft, such as wings or engines, involves a process of obtaining the most optimal component shape that can deliver the desired level of component performance, subject to various constraints, e.g., total weight or cost, that the component must satisfy. Aerodynamic design can thus be formulated as an optimization problem that involves the minimization of an objective function subject to constraints. A new aerodynamic design optimization procedure based on neural networks and response surface methodology (RSM) incorporates the advantages of both traditional RSM and neural networks. The procedure uses a strategy, denoted parameter-based partitioning of the design space, to construct a sequence of response surfaces based on both neural networks and polynomial fits to traverse the design space in search of the optimal solution. Some desirable characteristics of the new design optimization procedure include the ability to handle a variety of design objectives, easily impose constraints, and incorporate design guidelines and rules of thumb. It provides an infrastructure for variable fidelity analysis and reduces the cost of computation by using less-expensive, lower fidelity simulations in the early stages of the design evolution. The initial or starting design can be far from optimal. The procedure is easy and economical to use in large-dimensional design space and can be used to perform design tradeoff studies rapidly. Designs involving multiple disciplines can also be optimized. Some practical applications of the design procedure that have demonstrated some of its capabilities include the inverse design of an optimal turbine airfoil starting from a generic shape and the redesign of transonic turbines to improve their unsteady aerodynamic characteristics.

Optimal index related to the shoreline dynamics during a storm: the case of Jesolo beach

NASA Astrophysics Data System (ADS)

Archetti, Renata; Paci, Agnese; Carniel, Sandro; Bonaldo, Davide

2016-05-01

The paper presents an application of shoreline monitoring aimed at understanding the response of a beach to single storms and at identifying its typical behaviour, in order to be able to predict shoreline changes and to properly plan the defence of the shore zone. On the study area, in Jesolo beach (northern Adriatic Sea, Italy), a video monitoring station and an acoustic wave and current profiler were installed in spring 2013, recording, respectively, images and hydrodynamic data. The site lacks previous detailed hydrodynamic and morphodynamic data. Variations in the shoreline were quantified in combination with available near-shore wave conditions, making it possible to analyse the relationship between the shoreline displacement and the wave features. Results denote characteristic patterns of beach response to storm events, and highlight the importance of improving beach protection in this zone, notwithstanding the many interventions experimented in the last decades. A total of 31 independent storm events were selected during the period October 2013-October 2014, and for each of them synthetic indexes based on storm duration, energy and maximum wave height were developed and estimated. It was found that the net shoreline displacements during a storm are well correlated with the total wave energy associated to the considered storm by an empirical power law equation. A sub-selection of storms in the presence of an artificial dune protecting the beach (in the winter season) was examined in detail, allowing to conclude that the adoption of this coastal defence strategy in the study area can reduce shoreline retreat during a storm. This type of intervention can sometimes contribute to prolonging overall stability not only in the replenished zone but also in downdrift areas. The implemented methodology, which confirms to be economically attractive if compared to more traditional monitoring systems, proves to be a valuable system to monitor beach erosive processes and provide detailed indications on how to better plan beach-maintenance activities. The presented methodology and the proposed results can therefore be used as a basis for improving the collaboration between coastal scientists and managers to solve beach erosion problems, in locations where data are scattered and sporadic.

Estimating magnitude and frequency of floods using the PeakFQ 7.0 program

USGS Publications Warehouse

Veilleux, Andrea G.; Cohn, Timothy A.; Flynn, Kathleen M.; Mason, Jr., Robert R.; Hummel, Paul R.

2014-01-01

Flood-frequency analysis provides information about the magnitude and frequency of flood discharges based on records of annual maximum instantaneous peak discharges collected at streamgages. The information is essential for defining flood-hazard areas, for managing floodplains, and for designing bridges, culverts, dams, levees, and other flood-control structures. Bulletin 17B (B17B) of the Interagency Advisory Committee on Water Data (IACWD; 1982) codifies the standard methodology for conducting flood-frequency studies in the United States. B17B specifies that annual peak-flow data are to be fit to a log-Pearson Type III distribution. Specific methods are also prescribed for improving skew estimates using regional skew information, tests for high and low outliers, adjustments for low outliers and zero flows, and procedures for incorporating historical flood information. The authors of B17B identified various needs for methodological improvement and recommended additional study. In response to these needs, the Advisory Committee on Water Information (ACWI, successor to IACWD; http://acwi.gov/, Subcommittee on Hydrology (SOH), Hydrologic Frequency Analysis Work Group (HFAWG), has recommended modest changes to B17B. These changes include adoption of a generalized method-of-moments estimator denoted the Expected Moments Algorithm (EMA) (Cohn and others, 1997) and a generalized version of the Grubbs-Beck test for low outliers (Cohn and others, 2013). The SOH requested that the USGS implement these changes in a user-friendly, publicly accessible program.

Quenching or Bursting: Star Formation Acceleration—A New Methodology for Tracing Galaxy Evolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, D. Christopher; Darvish, Behnam; Seibert, Mark

We introduce a new methodology for the direct extraction of galaxy physical parameters from multiwavelength photometry and spectroscopy. We use semianalytic models that describe galaxy evolution in the context of large-scale cosmological simulation to provide a catalog of galaxies, star formation histories, and physical parameters. We then apply models of stellar population synthesis and a simple extinction model to calculate the observable broadband fluxes and spectral indices for these galaxies. We use a linear regression analysis to relate physical parameters to observed colors and spectral indices. The result is a set of coefficients that can be used to translate observedmore » colors and indices into stellar mass, star formation rate, and many other parameters, including the instantaneous time derivative of the star formation rate, which we denote the Star Formation Acceleration (SFA), We apply the method to a test sample of galaxies with GALEX photometry and SDSS spectroscopy, deriving relationships between stellar mass, specific star formation rate, and SFA. We find evidence for a mass-dependent SFA in the green valley, with low-mass galaxies showing greater quenching and higher-mass galaxies greater bursting. We also find evidence for an increase in average quenching in galaxies hosting an active galactic nucleus. A simple scenario in which lower-mass galaxies accrete and become satellite galaxies, having their star-forming gas tidally and/or ram-pressure stripped, while higher-mass galaxies receive this gas and react with new star formation, can qualitatively explain our results.« less

Fuzzy Integration of Support Vector Regression Models for Anticipatory Control of Complex Energy Systems

DOE PAGES

Alamaniotis, Miltiadis; Agarwal, Vivek

2014-04-01

Anticipatory control systems are a class of systems whose decisions are based on predictions for the future state of the system under monitoring. Anticipation denotes intelligence and is an inherent property of humans that make decisions by projecting in future. Likewise, artificially intelligent systems equipped with predictive functions may be utilized for anticipating future states of complex systems, and therefore facilitate automated control decisions. Anticipatory control of complex energy systems is paramount to their normal and safe operation. In this paper a new intelligent methodology integrating fuzzy inference with support vector regression is introduced. Our proposed methodology implements an anticipatorymore » system aiming at controlling energy systems in a robust way. Initially a set of support vector regressors is adopted for making predictions over critical system parameters. Furthermore, the predicted values are fed into a two stage fuzzy inference system that makes decisions regarding the state of the energy system. The inference system integrates the individual predictions into a single one at its first stage, and outputs a decision together with a certainty factor computed at its second stage. The certainty factor is an index of the significance of the decision. The proposed anticipatory control system is tested on a real world set of data obtained from a complex energy system, describing the degradation of a turbine. Results exhibit the robustness of the proposed system in controlling complex energy systems.« less

Quenching or Bursting: Star Formation Acceleration—A New Methodology for Tracing Galaxy Evolution

NASA Astrophysics Data System (ADS)

Martin, D. Christopher; Gonçalves, Thiago S.; Darvish, Behnam; Seibert, Mark; Schiminovich, David

2017-06-01

We introduce a new methodology for the direct extraction of galaxy physical parameters from multiwavelength photometry and spectroscopy. We use semianalytic models that describe galaxy evolution in the context of large-scale cosmological simulation to provide a catalog of galaxies, star formation histories, and physical parameters. We then apply models of stellar population synthesis and a simple extinction model to calculate the observable broadband fluxes and spectral indices for these galaxies. We use a linear regression analysis to relate physical parameters to observed colors and spectral indices. The result is a set of coefficients that can be used to translate observed colors and indices into stellar mass, star formation rate, and many other parameters, including the instantaneous time derivative of the star formation rate, which we denote the Star Formation Acceleration (SFA), We apply the method to a test sample of galaxies with GALEX photometry and SDSS spectroscopy, deriving relationships between stellar mass, specific star formation rate, and SFA. We find evidence for a mass-dependent SFA in the green valley, with low-mass galaxies showing greater quenching and higher-mass galaxies greater bursting. We also find evidence for an increase in average quenching in galaxies hosting an active galactic nucleus. A simple scenario in which lower-mass galaxies accrete and become satellite galaxies, having their star-forming gas tidally and/or ram-pressure stripped, while higher-mass galaxies receive this gas and react with new star formation, can qualitatively explain our results.

Intelligent systems/software engineering methodology - A process to manage cost and risk

NASA Technical Reports Server (NTRS)

Friedlander, Carl; Lehrer, Nancy

1991-01-01

A systems development methodology is discussed that has been successfully applied to the construction of a number of intelligent systems. This methodology is a refinement of both evolutionary and spiral development methodologies. It is appropriate for development of intelligent systems. The application of advanced engineering methodology to the development of software products and intelligent systems is an important step toward supporting the transition of AI technology into aerospace applications. A description of the methodology and the process model from which it derives is given. Associated documents and tools are described which are used to manage the development process and record and report the emerging design.

Camera Geo calibration Using an MCMC Approach (Author’s Manuscript)

DTIC Science & Technology

2016-08-19

calibration problem that supports priors over camera parameters and constraints that relate image anno - tations, camera geometry, and a geographic...Θi+1|Θi) = Ndim∏ j =1 1 σj φ ( Θi+1, j −Θi, j σj ) , where σj denotes the sampling step size on the j -th dimen- sion, and φ(x) denotes the PDF of the...image calibration,” Imaging for Crime Detection and Prevention, 2013. 1 [2] Haipeng Zhang, Mohammed Korayem, David J Crandall, and Gretchen LeBuhn

Analysis of an Hp-Non-conforming Discontinuous Galerkin Spectral Element Method for Wave

DTIC Science & Technology

2011-04-01

Scientific Computing, 36 (2008), pp. 351–390. [25] Eleuterio F . Toro , Riemann Solvers and Numerical Methods for Fluid Dynamics, Springer, 1999. [26...denoted by ñ, and the contravariant flux [15] is defined as F̃i = Jeai · F , i = 1, 2, 3, with ai as the contravariant basis vectors. We now describe...wave propagation case by the following definitions, q = ( E v ) ∈ V, Q = ( I 0 0 ρI ) , g = ( 0 f ) ∈ V, with I denoting the fourth-order identity tensor

The utility of health and wealth.

PubMed

Levy, Moshe; Nir, Adi Rizansky

2012-03-01

Tradeoffs between health and wealth are among the most important decisions individuals make, and are central to social and economic policy. Yet, only a few studies have investigated the utility of health and wealth empirically. This paper investigates this utility function both theoretically and empirically. We conduct detailed personal interviews with 180 cancer patients, and also obtain questionnaires from 132 diabetes patients. We find strong support for the utility function U(h, w)=h·log(w), where h denotes health and w denotes wealth. Copyright © 2012 Elsevier B.V. All rights reserved.

Factor Analysis for Spectral Reconnaissance and Situational Understanding

DTIC Science & Technology

2016-07-11

Number: Xiao Fu 0.40 0.40 1 Sub Contractors (DD882) Names of Faculty Supported Names of Under Graduate students supported Names of Personnel receiving...stationary point of Problem (10). The proof is as follows. For notational convenience, let X = [C, HT , (D′)T ], w = [w1, . . . , wK ] T , and denote g(X,w...10). The proof is as follows. For notational convenience, let X = [C, HT , (D′)T ], w = [w1, . . . , wK ] T , and denote g(X,w) = h(X) + λ K ∑ k=1

Moderate Deviation Principles for Stochastic Differential Equations with Jumps

DTIC Science & Technology

2014-01-15

N ŕ’"(dt; dy) and the controls ’" : X [0; T ] ! [0;1) are predictable processes satisfying LT (’") Ma2 (") for some constantM . Here LT denotes...space. Although in the moderate deviations problem one has the stronger bound LT (’") Ma2 (") on the cost of controls, the mere tightness of ’" does not...suitable quadratic form. For " > 0 and M ə, consider the spaces SM+;" : = f’ : X [0; T ]! R+j LT (’) Ma2 (")g (2.5) SM" : = f : X [0; T ]! Rj

Calligraphic Poling of Ferroelectric Material

NASA Technical Reports Server (NTRS)

Mohageg, Makan; Strekalov, Dmitry; Savchenkov, Anatoliy; Matsko, Adrey; Maleki, Lute; Iltchenko, Vladimir

2007-01-01

Calligraphic poling is a technique for generating an arbitrary, possibly complex pattern of localized reversal in the direction of permanent polarization in a wafer of LiNbO3 or other ferroelectric material. The technique is so named because it involves a writing process in which a sharp electrode tip is moved across a surface of the wafer to expose the wafer to a polarizing electric field in the desired pattern. The technique is implemented by use of an apparatus, denoted a calligraphic poling machine (CPM), that includes the electrode and other components as described in more detail below.

Using Constructivist Case Study Methodology to Understand Community Development Processes: Proposed Methodological Questions to Guide the Research Process

ERIC Educational Resources Information Center

Lauckner, Heidi; Paterson, Margo; Krupa, Terry

2012-01-01

Often, research projects are presented as final products with the methodologies cleanly outlined and little attention paid to the decision-making processes that led to the chosen approach. Limited attention paid to these decision-making processes perpetuates a sense of mystery about qualitative approaches, particularly for new researchers who will…

The primacy of the good midwife in midwifery services: an evolving theory of professionalism in midwifery.

PubMed

Halldorsdottir, Sigridur; Karlsdottir, Sigfridur Inga

2011-12-01

Theory is the acknowledged foundation to practise methodology, professional identity and growth of formalized knowledge. It has been noted that practice must not only be evidence-based but also theory-based. Hence, midwifery must be theory based because theories serve as a broad framework for practice and may also articulate the goals of a profession and core values. In this paper, an evolving theory on the empowerment of childbearing women is introduced, where the midwife's professionalism is central. The theory is synthesized from nine datasets and scholarly work, and then more than three hundred studies were reviewed for clarification and confirmation. According to the theory, the midwife's professionalism is constructed from five main aspects: The professional midwife cares for the childbearing woman and her family. This caring within the professional domain is seen as the core of midwifery. The professional midwife is professionally competent. This professional competence must always have primacy for the sake of safety of woman and child. The professional midwife has professional wisdom and knows how to apply it. Professional wisdom is a new concept used to denote the interplay of knowledge and experience. The professional midwife has interpersonal competence, is capable of empowering communication and positive partnership with the woman and her family. The professional midwife develops herself both personally and professionally, which is the prerequisite for true professionalism. This evolving theory must be regularly reconstructed in the light of current knowledge within midwifery. It is an attempt to identify and articulate the processes and components of the art and science of midwifery practice in an endeavour of continuing the discipline's development by assisting in the understanding and practice of creating further theoretical discourse, processes and products for midwifery practice. The theory has implications for midwifery education and practice. © 2011 The Authors. Scandinavian Journal of Caring Sciences © 2011 Nordic College of Caring Science.

An exponential time-integrator scheme for steady and unsteady inviscid flows

NASA Astrophysics Data System (ADS)

Li, Shu-Jie; Luo, Li-Shi; Wang, Z. J.; Ju, Lili

2018-07-01

An exponential time-integrator scheme of second-order accuracy based on the predictor-corrector methodology, denoted PCEXP, is developed to solve multi-dimensional nonlinear partial differential equations pertaining to fluid dynamics. The effective and efficient implementation of PCEXP is realized by means of the Krylov method. The linear stability and truncation error are analyzed through a one-dimensional model equation. The proposed PCEXP scheme is applied to the Euler equations discretized with a discontinuous Galerkin method in both two and three dimensions. The effectiveness and efficiency of the PCEXP scheme are demonstrated for both steady and unsteady inviscid flows. The accuracy and efficiency of the PCEXP scheme are verified and validated through comparisons with the explicit third-order total variation diminishing Runge-Kutta scheme (TVDRK3), the implicit backward Euler (BE) and the implicit second-order backward difference formula (BDF2). For unsteady flows, the PCEXP scheme generates a temporal error much smaller than the BDF2 scheme does, while maintaining the expected acceleration at the same time. Moreover, the PCEXP scheme is also shown to achieve the computational efficiency comparable to the implicit schemes for steady flows.

Using heuristic algorithms for capacity leasing and task allocation issues in telecommunication networks under fuzzy quality of service constraints

NASA Astrophysics Data System (ADS)

Huseyin Turan, Hasan; Kasap, Nihat; Savran, Huseyin

2014-03-01

Nowadays, every firm uses telecommunication networks in different amounts and ways in order to complete their daily operations. In this article, we investigate an optimisation problem that a firm faces when acquiring network capacity from a market in which there exist several network providers offering different pricing and quality of service (QoS) schemes. The QoS level guaranteed by network providers and the minimum quality level of service, which is needed for accomplishing the operations are denoted as fuzzy numbers in order to handle the non-deterministic nature of the telecommunication network environment. Interestingly, the mathematical formulation of the aforementioned problem leads to the special case of a well-known two-dimensional bin packing problem, which is famous for its computational complexity. We propose two different heuristic solution procedures that have the capability of solving the resulting nonlinear mixed integer programming model with fuzzy constraints. In conclusion, the efficiency of each algorithm is tested in several test instances to demonstrate the applicability of the methodology.

Intelligent-based Structural Damage Detection Model

NASA Astrophysics Data System (ADS)

Lee, Eric Wai Ming; Yu, Kin Fung

2010-05-01

This paper presents the application of a novel Artificial Neural Network (ANN) model for the diagnosis of structural damage. The ANN model, denoted as the GRNNFA, is a hybrid model combining the General Regression Neural Network Model (GRNN) and the Fuzzy ART (FA) model. It not only retains the important features of the GRNN and FA models (i.e. fast and stable network training and incremental growth of network structure) but also facilitates the removal of the noise embedded in the training samples. Structural damage alters the stiffness distribution of the structure and so as to change the natural frequencies and mode shapes of the system. The measured modal parameter changes due to a particular damage are treated as patterns for that damage. The proposed GRNNFA model was trained to learn those patterns in order to detect the possible damage location of the structure. Simulated data is employed to verify and illustrate the procedures of the proposed ANN-based damage diagnosis methodology. The results of this study have demonstrated the feasibility of applying the GRNNFA model to structural damage diagnosis even when the training samples were noise contaminated.

ATLAS: An advanced PCR-method for routine visualization of telomere length in Saccharomyces cerevisiae.

PubMed

Zubko, Elena I; Shackleton, Jennifer L; Zubko, Mikhajlo K

2016-12-01

Measuring telomere length is essential in telomere biology. Southern blot hybridization is the predominant method for measuring telomere length in the genetic model Saccharomyces cerevisiae. We have further developed and refined a telomere PCR approach, which was rarely used previously (mainly in specific telomeric projects), into a robust method allowing direct visualisation of telomere length differences in routine experiments with S. cerevisiae, and showing a strong correlation of results with data obtained by Southern blot hybridization. In this expanded method denoted as ATLAS (A-dvanced T-elomere L-ength A-nalysis in S. cerevisiae), we have introduced: 1) set of new primers annealing with high specificity to telomeric regions on five different chromosomes; 2) new approach for designing reverse telomere primers that is based on the ligation of an adaptor of a fixed size to telomeric ends. ATLAS can be used at the scale of individual assays and high-throughput approaches. This simple, time/cost-effective and reproducible methodology will complement Southern blot hybridization and facilitate further progress in telomere research. Copyright © 2016 Elsevier B.V. All rights reserved.

Inverse dynamics of underactuated mechanical systems: A simple case study and experimental verification

NASA Astrophysics Data System (ADS)

Blajer, W.; Dziewiecki, K.; Kołodziejczyk, K.; Mazur, Z.

2011-05-01

Underactuated systems are featured by fewer control inputs than the degrees-of-freedom, m < n. The determination of an input control strategy that forces such a system to complete a set of m specified motion tasks is a challenging task, and the explicit solution existence is conditioned to differential flatness of the problem. The flatness-based solution denotes that all the 2 n states and m control inputs can be algebraically expressed in terms of the m specified outputs and their time derivatives up to a certain order, which is in practice attainable only for simple systems. In this contribution the problem is posed in a more practical way as a set of index-three differential-algebraic equations, and the solution is obtained numerically. The formulation is then illustrated by a two-degree-of-freedom underactuated system composed of two rotating discs connected by a torsional spring, in which the pre-specified motion of one of the discs is actuated by the torque applied to the other disc, n = 2 and m = 1. Experimental verification of the inverse simulation control methodology is reported.

Eye-Tracking as a Tool in Process-Oriented Reading Test Validation

ERIC Educational Resources Information Center

Solheim, Oddny Judith; Uppstad, Per Henning

2011-01-01

The present paper addresses the continuous need for methodological reflection on how to validate inferences made on the basis of test scores. Validation is a process that requires many lines of evidence. In this article we discuss the potential of eye tracking methodology in process-oriented reading test validation. Methodological considerations…

Ferrotoroidial propertiesof Non-Crystallographic Pointgroups

NASA Astrophysics Data System (ADS)

Sireesha, G.; Devi, S. Uma; Yamini Sankar, CH.

2017-08-01

Primary ferroic crystals are the crystals with domain states that are distinguished by properties like spontaneous magnetization, strain, or polarisation. Secondary ferroic crystals are the crystals with domain states that are distinguished by piezoelectric tensor and they are named as Ferromagnetotoroidic (eV2), Ferromagnetoelastic (aeV [V2]) crystals respectively. Here “e” denotes zero rank tensor that changes under spatial inversion, “a” denotes zero rank tensor that changes under time inversion, and “V” denotes a polar vector. Recent observations (Van Aken et al., 2007) identified the fourth type of primary ferroic crystals, a ferrotoroidic crystal with domains distinguished by a toroidial moment. The number of independent constants of quasi crystals is theoretically derived by Wenge Yang et al., (1995). He also formulated the number of independent components of any physical property tensor of quasi crystals using group representation theory. This paper accounts the effect of symmetry on some ferrotoroidial properties of quasi Crystals with 5-fold, 8-fold, 10-fold and 12-fold symmetries using group theoretical methods. Also the number of independent constants is calculated and tabulated that helps in describing the ferrotoroidial properties.

Exponent and scrambling index of double alternate circular snake graphs

NASA Astrophysics Data System (ADS)

Rahmayanti, Sri; Pasaribu, Valdo E.; Nasution, Sawaluddin; Liani Salnaz, Sishi

2018-01-01

A graph is primitive if it contains a cycle of odd length. The exponent of a primitive graph G, denoted by exp(G), is the smallest positive integer k such that for each pair of vertices u and v in G there is a uv-walk length k. The scrambling index of a primitive graph G, denoted by k(G), is the smallest positive integer k such that for each pair of vertices u and v in G there is a uv-walk of length 2k. For an even positive integer n and an odd positive integer r, a (n,r)-double alternate circular snake graph, denoted by DA(C r,n ), is a graph obtained from a path u 1 u 2 ... u n by replacing each edge of the form u 2i u 2i+1 by two different r-cycles. We study the exponent and scrambling index of DA(C r,n ) and show that exp(DA(C r,n )) = n + r - 4 and k(DA(C r,n )) = (n + r - 3)/2.

Single machine total completion time minimization scheduling with a time-dependent learning effect and deteriorating jobs

NASA Astrophysics Data System (ADS)

Wang, Ji-Bo; Wang, Ming-Zheng; Ji, Ping

2012-05-01

In this article, we consider a single machine scheduling problem with a time-dependent learning effect and deteriorating jobs. By the effects of time-dependent learning and deterioration, we mean that the job processing time is defined by a function of its starting time and total normal processing time of jobs in front of it in the sequence. The objective is to determine an optimal schedule so as to minimize the total completion time. This problem remains open for the case of -1 < a < 0, where a denotes the learning index; we show that an optimal schedule of the problem is V-shaped with respect to job normal processing times. Three heuristic algorithms utilising the V-shaped property are proposed, and computational experiments show that the last heuristic algorithm performs effectively and efficiently in obtaining near-optimal solutions.

Overview of the Integrated Programs for Aerospace Vehicle Design (IPAD) project

NASA Technical Reports Server (NTRS)

Venneri, S. L.

1983-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of data base management technology and associated software for integrated company wide management of engineering and manufacturing information. Results to date on the IPAD project include an in depth documentation of a representative design process for a large engineering project, the definition and design of computer aided design software needed to support that process, and the release of prototype software to manage engineering information. This paper provides an overview of the IPAD project and summarizes progress to date and future plans.

Separation and Sealing of a Sample Container Using Brazing

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Rivellini, Tommaso P.; Wincentsen, James E.; Gershman, Robert

2007-01-01

A special double-wall container and a process for utilizing the container are being developed to enable (1) acquisition of a sample of material in a dirty environment that may include a biological and/or chemical hazard; (2) sealing a lid onto the inner part of the container to hermetically enclose the sample; (3) separating the resulting hermetic container from the dirty environment; and (4) bringing that hermetic container, without any biological or chemical contamination of its outer surface, into a clean environment. The process is denoted S(exp 3)B (separation, seaming, and sealing using brazing) because sealing of the sample into the hermetic container, separating the container from the dirty environment, and bringing the container with a clean outer surface into the clean environment are all accomplished simultaneously with a brazing operation.

Development of economic consequence methodology for process risk analysis.

PubMed

Zadakbar, Omid; Khan, Faisal; Imtiaz, Syed

2015-04-01

A comprehensive methodology for economic consequence analysis with appropriate models for risk analysis of process systems is proposed. This methodology uses loss functions to relate process deviations in a given scenario to economic losses. It consists of four steps: definition of a scenario, identification of losses, quantification of losses, and integration of losses. In this methodology, the process deviations that contribute to a given accident scenario are identified and mapped to assess potential consequences. Losses are assessed with an appropriate loss function (revised Taguchi, modified inverted normal) for each type of loss. The total loss is quantified by integrating different loss functions. The proposed methodology has been examined on two industrial case studies. Implementation of this new economic consequence methodology in quantitative risk assessment will provide better understanding and quantification of risk. This will improve design, decision making, and risk management strategies. © 2014 Society for Risk Analysis.

Reliability Centered Maintenance - Methodologies

NASA Technical Reports Server (NTRS)

Kammerer, Catherine C.

2009-01-01

Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

Information technology security system engineering methodology

NASA Technical Reports Server (NTRS)

Childs, D.

2003-01-01

A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

Coherence of the Geomagnetic Field and Implications for Noise Reduction Using Mesospheric Magnetometry

DTIC Science & Technology

2016-09-01

denoted K1 and K2 ). On the night of July 11-12, the fourth groundstation was located south of Peridot, AZ (denoted P) and on the night of July 12...Airport K1 (July 11-12) K2 (July 12-13) 33.0464 110.9051 Stewart Observatory ST1 (July 11-12) ST2 (July 12-13) 32.4169 110.7326 Tucson USGS...120 98 27 0 Table 4. Separation of various groundstations for the night of July 12-13. Distance (km) Location T K2 ST2 TUC2 T 0 31 98 125 K2

Semantic Domains and Denotational Semantics

DTIC Science & Technology

1989-02-14

are continuous functions PL N -* PN FL :PN -PN such that IL 0 %FL = id and T1/L o IL -- id. Then the function RL (r,s) = TLo 4L represents the constant...would actually reduce the abstractness of denotations. The popularity of continuations seems to be partly due to the accompanying notational convenience...R.L ’ES.(~’ , r) s’)] ( rl (s))) (ext~ rl , _L R ,S’ E S). (g(r’, r2), ’]r( )) (S[Sile)(SIS1Je) S[ < S > =Ae E Env. fix(Ah R -, R. Ar E R. ext[As E S

Feature space trajectory for distorted-object classification and pose estimation in synthetic aperture radar

NASA Astrophysics Data System (ADS)

Casasent, David P.; Shenoy, Rajesh

1997-10-01

Classification and pose estimation of distorted input objects are considered. The feature space trajectory representation of distorted views of an object is used with a new eigenfeature space. For a distorted input object, the closest trajectory denotes the class of the input and the closest line segment on it denotes its pose. If an input point is too far from a trajectory, it is rejected as clutter. New methods for selecting Fukunaga-Koontz discriminant vectors, the number of dominant eigenvectors per class and for determining training, and test set compatibility are presented.

Phoenix, a High-Performance UNIX with an Emphasis on Dynamic Modification, Real-Time Response and Survivability

DTIC Science & Technology

1988-12-02

Include Area Code) I22c. OFIICE 5YMBOL Dr. David W. Hislop I I DD FORM 1473,84 MAR d3 APR edition may oe used until exnausteo. SECURITY CLASSIFICATION OF...Emulator for Performance Evaluation, CommUicanions ofILheACM23, 2 (Feb. 1980 ), 71-80. (4) Wirth, N., Microprocessor Architectures: A Comparison Based on...byte-addressing and has a 16-bit word 1980 decimal size. 3764B octal (denoted by the trailing "B") OCADH hexadeci’nal (denoted by the mailing "H") 1.1

A Three-Stage Colonel Blotto Game with Applications to Cyber-Physical Security

DTIC Science & Technology

2014-03-15

joint measure over the space Ri. Let µi ∈ ℘(Ri) be the strategy of Player i. Then, we let Prk #µi denote the marginal of µi on the k th battlefield. A...solely on the marginal distributions ( Prk #µ1,Pr k #µ2). The resources available to the players and the number of battlefields are common knowledge...Ri) → 2℘(Ri) denote a set-valued map (correspon- dence), defined as Ψi(µi) := { µ̃i ∈ ℘(Ri) : supp(µ̃i) = supp(µi) and Prk #µ̃i = Pr k #µi for all k

Stress Analysis of Adhesively Bonded Repairs to Fibre Composite Structures,

DTIC Science & Technology

1981-03-01

which is bonded to a thin sheet of fibre composite material. The x and y axes are taken in a plane parallel to the midsurface of the sheet with the z...SHEET vI X1 FIG. 1 AXIS SYSTEM IN PATCH related to the displacements at the midsurface of the patch, which we will denote by uo, vo and w, and the...displacements at the midsurface of the sheet, which we will denote by u, vs and w, by the following expression: T ( =uo - us +f7 ’ f/fg + (VO - v, +f 7 3)f4

Localized orbital corrections applied to thermochemical errors in density functional theory: The role of basis set and application to molecular reactions

NASA Astrophysics Data System (ADS)

Goldfeld, Dahlia A.; Bochevarov, Arteum D.; Friesner, Richard A.

2008-12-01

This paper is a logical continuation of the 22 parameter, localized orbital correction (LOC) methodology that we developed in previous papers [R. A. Friesner et al., J. Chem. Phys. 125, 124107 (2006); E. H. Knoll and R. A. Friesner, J. Phys. Chem. B 110, 18787 (2006).] This methodology allows one to redress systematic density functional theory (DFT) errors, rooted in DFT's inherent inability to accurately describe nondynamical correlation. Variants of the LOC scheme, in conjunction with B3LYP (denoted as B3LYP-LOC), were previously applied to enthalpies of formation, ionization potentials, and electron affinities and showed impressive reduction in the errors. In this paper, we demonstrate for the first time that the B3LYP-LOC scheme is robust across different basis sets [6-31G∗, 6-311++G(3df,3pd), cc-pVTZ, and aug-cc-pVTZ] and reaction types (atomization reactions and molecular reactions). For example, for a test set of 70 molecular reactions, the LOC scheme reduces their mean unsigned error from 4.7 kcal/mol [obtained with B3LYP/6-311++G(3df,3pd)] to 0.8 kcal/mol. We also verified whether the LOC methodology would be equally successful if applied to the promising M05-2X functional. We conclude that although M05-2X produces better reaction enthalpies than B3LYP, the LOC scheme does not combine nearly as successfully with M05-2X than with B3LYP. A brief analysis of another functional, M06-2X, reveals that it is more accurate than M05-2X but its combination with LOC still cannot compete in accuracy with B3LYP-LOC. Indeed, B3LYP-LOC remains the best method of computing reaction enthalpies.

Functionally different PIN proteins control auxin flux during bulbil development in Agave tequilana.

PubMed

Abraham Juárez, María Jazmín; Hernández Cárdenas, Rocío; Santoyo Villa, José Natzul; O'Connor, Devin; Sluis, Aaron; Hake, Sarah; Ordaz-Ortiz, José; Terry, Leon; Simpson, June

2015-07-01

In Agave tequilana, reproductive failure or inadequate flower development stimulates the formation of vegetative bulbils at the bracteoles, ensuring survival in a hostile environment. Little is known about the signals that trigger this probably unique phenomenon in agave species. Here we report that auxin plays a central role in bulbil development and show that the localization of PIN1-related proteins is consistent with altered auxin transport during this process. Analysis of agave transcriptome data led to the identification of the A. tequilana orthologue of PIN1 (denoted AtqPIN1) and a second closely related gene from a distinct clade reported as 'Sister of PIN1' (denoted AtqSoPIN1). Quantitative real-time reverse transcription-PCR (RT-qPCR) analysis showed different patterns of expression for each gene during bulbil formation, and heterologous expression of the A. tequilana PIN1 and SoPIN1 genes in Arabidopsis thaliana confirmed functional differences between these genes. Although no free auxin was detected in induced pedicel samples, changes in the levels of auxin precursors were observed. Taken as a whole, the data support the model that AtqPIN1 and AtqSoPIN1 have co-ordinated but distinct functions in relation to auxin transport during the initial stages of bulbil formation. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

A Dioxane Template for Highly Selective Epoxy Alcohol Cyclizations

PubMed Central

Mousseau, James J.; Morten, Christopher J.

2013-01-01

Ladder polyether natural products are a class of natural products denoted by their high functional group density and large number of well-defined stereocenters. They comprise the toxic component of harmful algal blooms (HABs), having significant negative economic and environmental ramifications. However, their mode of action, namely blocking various cellular ion channels, also denotes their promise as potential anticancer agents. Understanding their potential mode of biosynthesis will not only help with developing ways to limit the damage of HABs, but would also facilitate the synthesis of a range of analogues with interesting biological activity. 1,3-Dioxan-5-ol substrates display remarkable ‘enhanced template effects’ in water-promoted epoxide cyclization processes en route to the synthesis of these ladder polyether natural products. In many cases they provide near complete endo to exo selectivity in the cyclization of epoxy alcohols, thereby strongly favouring the formation of tetrahydropyran (THP) over tetrahydrofuran (THF) rings. The effects of various Brønsted and Lewis acidic and basic conditions are explored to demonstrate the superior selectivity of the template over the previously reported THP-based epoxy alcohols. In addition, the consideration of other synthetic routes are also considered with the goal of gaining rapid access to a plethora of potential starting materials applicable towards the synthesis of ladder polyethers. Finally, cascade sequences with polyepoxides are investigated, further demonstrating the versatility of this new reaction template. PMID:23775936

Hierarchical carbon-coated acanthosphere-like Li4Ti5O12 microspheres for high-power lithium-ion batteries

NASA Astrophysics Data System (ADS)

Sha, Yujing; Xu, Xiaomin; Li, Li; Cai, Rui; Shao, Zongping

2016-05-01

In this work, carbon-coated hierarchical acanthosphere-like Li4Ti5O12 microspheres (denoted as AM-LTO) were prepared via a two-step hydrothermal process with low-cost glucose as the organic carbon source. The hierarchical porous microspheres had open structures with diameters of 4-6 μm, which consisted of a bunch of willow leaf-like nanosheets. Each nanosheet was comprised of Li4Ti5O12 nanoparticles that are 20 nm in size and coated by a thin carbon layer. When applied as the anode material for lithium-ion batteries (LIBs), the AM-LTO presented outstanding rate and cycling performance due to its unique morphologies. A high capacity of 145.6 mAh g-1 was achieved for AM-LTO at a rate of 40C (1C = 175 mAh g-1). In contrast, the sample synthesized without glucose as carbon source (denoted as S-LTO) experienced an obvious structural collapse during the hydrothermal reaction and presented a specific capacity of only 67 mAh g-1 at 1C, which further decreased to 14 mAh g-1 at 40C. Further morphological growth of the acanthosphere-like Li4Ti5O12 microspheres and their excellent performance as an anode in LIBs were also discussed in this work.

Higgs mediated CLFV processes μN(eN)→τX via gluon operators

NASA Astrophysics Data System (ADS)

Takeuchi, Michihisa; Uesaka, Yuichi; Yamanaka, Masato

2017-09-01

We revisit charged lepton flavor violating (CLFV) scattering processes ℓi N → τX (ℓi ∋ e , μ) mediated by Higgs. We point out that a new subprocess ℓi g → τg via the effective interactions of Higgs and gluon gives the dominant contribution to ℓi N → τX for an incident beam energy of Eℓ ≲ 1 TeV in fixed target experiments. Furthermore, in the light of quark number conservation, we consider quark pair-production processes ℓi g → τq q bar (q denotes quarks) instead of ℓi q → τq. This corrects the threshold energy of each subprocess contributing to σ (ℓi N → τX). Reevaluation of σ (ℓi N → τX) including all of relevant subprocesses shows that the search for ℓi N → τX could serve a complementary opportunity with other relevant processes to shed light on the Higgs CLFV.

Empowerment: a conceptual discussion.

PubMed

Tengland, Per-Anders

2008-06-01

The concept of 'empowerment' is used frequently in a number of professional areas, from psychotherapy to social work. But even if the same term is used, it is not always clear if the concept denotes the same goals or the same practice in these various fields. The purpose of this paper is to clarify the discussion and to find a plausible and useful definition of the concept that is suitable for work in various professions. Several suggestions are discussed in the paper, for example control over life or health, autonomy, ability, self-efficacy, self-esteem, and freedom, and it is concluded that there are two plausible complementary uses, one as a goal and one as a process or approach. Empowerment as a goal is to have control over the determinants of one's quality of life, and empowerment as a process is to create a professional relation where the client or community takes control over the change process, determining both the goals of this process and the means to use.

Equidistribution for Nonuniformly Expanding Dynamical Systems, and Application to the Almost Sure Invariance Principle

NASA Astrophysics Data System (ADS)

Korepanov, Alexey

2017-12-01

Let {T : M \\to M} be a nonuniformly expanding dynamical system, such as logistic or intermittent map. Let {v : M \\to R^d} be an observable and {v_n = \\sum_{k=0}^{n-1} v circ T^k} denote the Birkhoff sums. Given a probability measure {μ} on M, we consider v n as a discrete time random process on the probability space {(M, μ)} . In smooth ergodic theory there are various natural choices of {μ} , such as the Lebesgue measure, or the absolutely continuous T-invariant measure. They give rise to different random processes. We investigate relation between such processes. We show that in a large class of measures, it is possible to couple (redefine on a new probability space) every two processes so that they are almost surely close to each other, with explicit estimates of "closeness". The purpose of this work is to close a gap in the proof of the almost sure invariance principle for nonuniformly hyperbolic transformations by Melbourne and Nicol.

Distinct neural processes are engaged in the modulation of mimicry by social group-membership and emotional expressions.

PubMed

Rauchbauer, Birgit; Majdandžić, Jasminka; Hummer, Allan; Windischberger, Christian; Lamm, Claus

2015-09-01

People often spontaneously engage in copying each other's postures and mannerisms, a phenomenon referred to as behavioral mimicry. Social psychology experiments indicate that mimicry denotes an implicit affiliative signal flexibly regulated in response to social requirements. Yet, the mediating processes and neural underpinnings of such regulation are largely unexplored. The present functional magnetic resonance imaging (fMRI) study examined mimicry regulation by combining an automatic imitation task with facial stimuli, varied on two social-affective dimensions: emotional expression (angry vs happy) and ethnic group membership (in- vs out-group). Behavioral data revealed increased mimicry when happy and when out-group faces were shown. Imaging results revealed that mimicry regulation in response to happy faces was associated with increased activation in the right temporo-parietal junction (TPJ), right dorsal premotor cortex (dPMC), and right superior parietal lobule (SPL). Mimicry regulation in response to out-group faces was related to increased activation in the left ventral premotor cortex (vPMC) and inferior parietal lobule (IPL), bilateral anterior insula, and mid-cingulate cortex (MCC). We suggest that mimicry in response to happy and to out-group faces is driven by distinct affiliative goals, and that mimicry regulation to attain these goals is mediated by distinct neuro-cognitive processes. Higher mimicry in response to happy faces seems to denote reciprocation of an affiliative signal. Higher mimicry in response to out-group faces, reflects an appeasement attempt towards an interaction partner perceived as threatening (an interpretation supported by implicit measures showing that out-group members are more strongly associated with threat). Our findings show that subtle social cues can result in the implicit regulation of mimicry. This regulation serves to achieve distinct affiliative goals, is mediated by different regulatory processes, and relies on distinct parts of an overarching network of task-related brain areas. Our findings shed new light on the neural mechanisms underlying the interplay between implicit action control and social cognition. Copyright © 2015 Elsevier Ltd. All rights reserved.

Epidemic spreading and global stability of an SIS model with an infective vector on complex networks

NASA Astrophysics Data System (ADS)

Kang, Huiyan; Fu, Xinchu

2015-10-01

In this paper, we present a new SIS model with delay on scale-free networks. The model is suitable to describe some epidemics which are not only transmitted by a vector but also spread between individuals by direct contacts. In view of the biological relevance and real spreading process, we introduce a delay to denote average incubation period of disease in a vector. By mathematical analysis, we obtain the epidemic threshold and prove the global stability of equilibria. The simulation shows the delay will effect the epidemic spreading. Finally, we investigate and compare two major immunization strategies, uniform immunization and targeted immunization.

Highly efficient chiral resolution of DL-arginine by cocrystal formation followed by recrystallization under preferential-enrichment conditions.

PubMed

Iwama, Sekai; Kuyama, Kazunori; Mori, Yuko; Manoj, Kochunnoonny; Gonnade, Rajesh G; Suzuki, Katsuaki; Hughes, Colan E; Williams, P Andrew; Harris, Kenneth D M; Veesler, Stéphane; Takahashi, Hiroki; Tsue, Hirohito; Tamura, Rui

2014-08-11

An excellent chiral symmetry-breaking spontaneous enantiomeric resolution phenomenon, denoted preferential enrichment, was observed on recrystallization of the 1:1 cocrystal of dl-arginine and fumaric acid, which is classified as a racemic compound crystal with a high eutectic ee value (>95 %), under non-equilibrium crystallization conditions. On the basis of temperature-controlled video microscopy and in situ time-resolved solid-state (13) C NMR spectroscopic studies on the crystallization process, a new mechanism of phase transition that can induce preferential enrichment is proposed. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance of the hybrid MLPNN based VE (hMLPNN-VE) for the nonlinear PMR channels

NASA Astrophysics Data System (ADS)

Wongsathan, Rati; Phakphisut, Watid; Supnithi, Pornchai

2018-05-01

This paper proposes a hybrid of multilayer perceptron neural network (MLPNN) and Volterra equalizer (VE) denoted hMLPNN-VE in nonlinear perpendicular magnetic recording (PMR) channels. The proposed detector integrates the nonlinear product terms of the delayed readback signals generated from the VE into the nonlinear processing of the MLPNN. The detection performance comparison is evaluated in terms of the tradeoff between the bit error rate (BER), complexity and reliability for a nonlinear Volterra channel at high normalized recording density. The proposed hMLPNN-VE outperforms MLPNN based equalizer (MLPNNE), VE and the conventional partial response maximum likelihood (PRML) detector.

Thirteenth Annual Lenna Frances Cooper Memorial Lecture: Nutrition education-what comes next?

PubMed

Robinson, C H

1976-08-01

Education for normal nutrition must include preventive measures against the principal health problems of the day, namely cardiovascular and gastrointestinal diseases. Preventive nutrition denotes a sufficiency of all nutrients for normal metabolic processes and the avoidance of excesses of calories, salurated fat, cholesterol, simple carbohydrates, and refined foods. The dietitian is uniquely qualified to interpret nutritional science and to apply it to daily food choices by people and must assume leadership in all program development for nutrition education, including nutrition education programs in the nation's schools. For effective, preventive nutrition education, new perspectives are needed to overcome the limitations of the simplistic, traditional approach.

International Conference of Defects in Semiconductors (19th), ICDS, Held in Aveiro, Portugal on July 21-25, 1997, Pt. 3

DTIC Science & Technology

1998-01-23

2 1 ■1 WWW .; 0 100 200 300 400 0 100 200 300 400 0 100 200 300 400 co (Mrad/s) Fig. 1 Characteristic EFG corresponding to type II...results for 1/T -» 0. Materials Science Forum Vols. 258-263 1355 ent, and the quasi-Fermi level, eF, is pinned to the DX level position, eDX . eB...denoted by E plus index. For single electron processes, s = E). The pressure dependence of eDX is shown by squares in Fig. 4. The dashed line shows the

Structure and dynamics of Earth's lower mantle.

PubMed

Garnero, Edward J; McNamara, Allen K

2008-05-02

Processes within the lowest several hundred kilometers of Earth's rocky mantle play a critical role in the evolution of the planet. Understanding Earth's lower mantle requires putting recent seismic and mineral physics discoveries into a self-consistent, geodynamically feasible context. Two nearly antipodal large low-shear-velocity provinces in the deep mantle likely represent chemically distinct and denser material. High-resolution seismological studies have revealed laterally varying seismic velocity discontinuities in the deepest few hundred kilometers, consistent with a phase transition from perovskite to post-perovskite. In the deepest tens of kilometers of the mantle, isolated pockets of ultralow seismic velocities may denote Earth's deepest magma chamber.

Local Risk-Minimization for Defaultable Claims with Recovery Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biagini, Francesca, E-mail: biagini@mathematik.uni-muenchen.de; Cretarola, Alessandra, E-mail: alessandra.cretarola@dmi.unipg.it

We study the local risk-minimization approach for defaultable claims with random recovery at default time, seen as payment streams on the random interval [0,{tau} Logical-And T], where T denotes the fixed time-horizon. We find the pseudo-locally risk-minimizing strategy in the case when the agent information takes into account the possibility of a default event (local risk-minimization with G-strategies) and we provide an application in the case of a corporate bond. We also discuss the problem of finding a pseudo-locally risk-minimizing strategy if we suppose the agent obtains her information only by observing the non-defaultable assets.

Metabolism, obesity and the metabolic syndrome.

PubMed

Persson, Pontus B; Bondke Persson, Anja

2018-05-13

The current obesity epidemic has not only spread from Western to developing economies, but is affecting ever younger individuals. While oftentimes blamed on a slow metabolism or a hereditary component, one might consider whether family recipes and dietary habits are hereditary to a much higher degree than slow metabolism or big bones could ever be. Education is critical, so how do we explain metabolism to a layman, e.g. a parent of an obese child? - Metabolism denotes all the processes, which turn nutrients from our food into energy. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

A Study of Seismic Wave Propagation at Regional Distances in Five Areas of the World

DTIC Science & Technology

1982-02-08

5.60 CA18 740425 08 56 42.8 17.195S 70.683W 29 5.20 CA20 740706 07 04 25.1 22.128S 64.294W 15 4.30 CA27 741031 08 58 20.9 15.438S 71.050W 50 5.00...earthquake with mb - 5. Natural earthquakes are denoted as circles and rock bursts as triangles, 7 Logarithmic plots of A/T (amplitudes divided by 29 periods...propagation paths are denoted by symbols shown in the legend. 29 Trace amplitudes of S in South America, plotted 61 n against epicentral distance

Transverse-mode beam splitter of a light beam and its application to quantum cryptography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sasada, Hiroyuki; Okamoto, Megumi

2003-07-01

We have theoretically and experimentally studied how a Mach-Zehnder interferometer with an additional mirror transforms a light beam composed of the second lowest transverse modes, HG{sub 10}, HG{sub 01}, LG{sub 01}, and LG{sub 0-1} (HG denotes Hermite-Gaussian mode; LG denotes Laguerre-Gaussian mode). In certain conditions, the interferometer divides the incident beam into the HG{sub 10} and HG{sub 01} components as a transverse-mode beam splitter. We propose a practical device involving the two interferometers for quantum cryptography, in which a photon carries two bits corresponding to the polarization and the transverse mode.

Elliptic Integrals in the Minkowski Plane

DTIC Science & Technology

1991-05-09

factorial Pochhammer notation F(a + k) (a)k - (a) Let F(a, b , c denote the hypergeometric function. Assume c - a - b = d , where d is a positive...integer. Then in a neighborhood of C = 1 , ((d) F(a+ b+d) d-1 (a)n (b)n )n(22) F(a , b , a + b + d , () = E~ )rb+ 0-’)n( ) r(a +d) r(b +d) n =O0( ’d’ n...axes a , b and eccentriaty e = c where c = Ta2 - b2 . Let P denote one of the foci of the ellipse. Then (26) 1 1 1 2 and(26) ar+(K, P) 2 -er F(- 1

CONFERENCE Proceedings of the computer Aided System Design and Simulation (50th) Held in Cesme/Ismir, Turkey on 22-25 May 1990 (Systeme de Conception Aide par Ordinateur et Simulation)

DTIC Science & Technology

1990-05-01

vital problem. During flight conditions a sensor, or a combination of sensors might undergo a failure, causing the loss of sensor signals that are...by solving the optimization problem max I k - k I(Z 00 (55) d(zk) e n V~ l where k denotes the nominal sensor gains and I1.11 denotes the weighted I...the Weapon System. Parameters like volume and weight have to be approximately defined at the begining of this phase. It is equally important to obtain

Synthesis of Asynchronous Systems from Data Flow Specifications

DTIC Science & Technology

1993-12-01

Sarma B. K. Vrudhula, UA-ECE ISI/RR-93-366 December 1993 DTIC S ELECTE APR 2 81994 U G D!MC QUA& f n MC’W". 1 S INFORMATION SCIENCES 3101822-1511...wire data types is denoted by nb, where n is a positive integer. 3. Group data types are denoted by (g1,g2,.. . , g ,), where each gi is a null data type...During the manipulation of a DFG, a data type may be reduced to an equiv- alent data type. (gl) is equivalent to g1 , and (g1,g2,. . . , g 3 i--9,g9,gj+1

Children acquire the later-greater principle after the cardinal principle

PubMed Central

Le Corre, Mathieu

2014-01-01

Many have proposed that the acquisition of the cardinal principle is a result of the discovery of the numerical significance of the order of the number words in the count list. However, this need not be the case. Indeed, the cardinal principle does not state anything about the numerical significance of the order of the number words. It only states that the last word of a correct count denotes the numerosity of the counted set. Here we test whether the acquisition of the cardinal principle involves the discovery of the later-greater principle – i.e., that the order of the number words corresponds to the relative size of the numerosities they denote. Specifically, we tested knowledge of verbal numerical comparisons (e.g., Is “ten” more than “six”?) in children who had recently learned the cardinal principle. We find that these children can compare number words between “six” and “ten” only if they have mapped them onto non-verbal representations of numerosity. We suggest that this means that the acquisition of the cardinal principle does not involve the discovery of the correspondence between the order of the number words and the relative size of the numerosities they denote. PMID:24372336

Children acquire the later-greater principle after the cardinal principle.

PubMed

Le Corre, Mathieu

2014-06-01

Many have proposed that the acquisition of the cardinal principle (CP) is a result of the discovery of the numerical significance of the order of the number words in the count list. However, this need not be the case. Indeed, the CP does not state anything about the numerical significance of the order of the number words. It only states that the last word of a correct count denotes the numerosity of the counted set. Here, we test whether the acquisition of the CP involves the discovery of the later-greater principle - that is, that the order of the number words corresponds to the relative size of the numerosities they denote. Specifically, we tested knowledge of verbal numerical comparisons (e.g., Is 'ten' more than 'six'?) in children who had recently learned the CP. We find that these children can compare number words between 'six' and 'ten' only if they have mapped them onto non-verbal representations of numerosity. We suggest that this means that the acquisition of the CP does not involve the discovery of the correspondence between the order of the number words and the relative size of the numerosities they denote. © 2013 The British Psychological Society.

Local metric dimension of circulant graph c i r c (n :1 ,2 ,…,n/+1 2 )

NASA Astrophysics Data System (ADS)

Rimadhany, Ruzika; Darmaji

2017-08-01

Let G be a connected graph with two vertices u and v. The distance between u and v, denoted by d(u, v), is defined as length of the shortest path from u to v in G. For an ordered set W = {w1, w2, w3, … , wk} of k distinct vertices in a nontrivial connected graph G, the representation of a vertex v of V(G) respect to W is r(v|W) = (d(v, w1), d(v, w2), … , d(v, wk)). The set W is a resolving set of G if r(v|W) for each vertex v ∈ V(G) is distinct. A resolving set of minimum cardinality is a metric dimension and denoted by dim(G). The set W is a local resolving set of G if r(v|W) for every two adjacent vertices of V(G) is distinct. The minimum cardinality of local resolving set of G is a local metric dimension and denoted by ldim(G). In this research, we determine local metric dimension of circulant graph c i r c (n :1 ,2 ,3 ,…,n/+1 2 ) .

A negotiation methodology and its application to cogeneration planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, S.M.; Liu, C.C.; Luu, S.

Power system planning has become a complex process in utilities today. This paper presents a methodology for integrated planning with multiple objectives. The methodology uses a graphical representation (Goal-Decision Network) to capture the planning knowledge. The planning process is viewed as a negotiation process that applies three negotiation operators to search for beneficial decisions in a GDN. Also, the negotiation framework is applied to the problem of planning for cogeneration interconnection. The simulation results are presented to illustrate the cogeneration planning process.

P-Code-Enhanced Encryption-Mode Processing of GPS Signals

NASA Technical Reports Server (NTRS)

Young, Lawrence; Meehan, Thomas; Thomas, Jess B.

2003-01-01

A method of processing signals in a Global Positioning System (GPS) receiver has been invented to enable the receiver to recover some of the information that is otherwise lost when GPS signals are encrypted at the transmitters. The need for this method arises because, at the option of the military, precision GPS code (P-code) is sometimes encrypted by a secret binary code, denoted the A code. Authorized users can recover the full signal with knowledge of the A-code. However, even in the absence of knowledge of the A-code, one can track the encrypted signal by use of an estimate of the A-code. The present invention is a method of making and using such an estimate. In comparison with prior such methods, this method makes it possible to recover more of the lost information and obtain greater accuracy.

LC3- and p62-based biochemical methods for the analysis of autophagy progression in mammalian cells.

PubMed

Jiang, Peidu; Mizushima, Noboru

2015-03-01

Autophagy is an intracellular degradation system that delivers cytoplasmic materials to the lysosome or vacuole. This system plays a crucial role in various physiological and pathological processes in living organisms ranging from yeast to mammals. Thus, an accurate and reliable measure of autophagic activity is necessary. However, autophagy involves dynamic and complicated processes that make it difficult to analyze. The term "autophagic flux" is used to denote overall autophagic degradation (i.e., delivery of autophagic cargo to the lysosome) rather than autophagosome formation. Immunoblot analysis of LC3 and p62/SQSTM1, among other proteins, has been widely used to monitor autophagic flux. Here, we describe basic protocols to measure the levels of endogenous LC3 and p62 by immunoblotting in cultured mammalian cells. Copyright © 2014 Elsevier Inc. All rights reserved.

Autophagic Regulation of Lipid Homeostasis in Cardiometabolic Syndrome.

PubMed

Yang, Mingjie; Zhang, Yingmei; Ren, Jun

2018-01-01

As an important protein quality control process, autophagy is essential for the degradation and removal of long-lived or injured cellular components and organelles. Autophagy is known to participate in a number of pathophysiological processes including cardiometabolic syndrome. Recent findings have shown compelling evidence for the intricate interplay between autophagy and lipid metabolism. Autophagy serves as a major regulator of lipid homeostasis while lipid can also influence autophagosome formation and autophagic signaling. Lipophagy is a unique form of selective autophagy and functions as a fundamental mechanism for clearance of lipid excess in atherosclerotic plaques. Ample of evidence has denoted a novel therapeutic potential for autophagy in deranged lipid metabolism and management of cardiometabolic diseases such as atherosclerosis and diabetic cardiomyopathy. Here we will review the interplays between cardiac autophagy and lipid metabolism in an effort to seek new therapeutic options for cardiometabolic diseases.

Preserved visual lexicosemantics in global aphasia: a right-hemisphere contribution?

PubMed

Gold, B T; Kertesz, A

2000-12-01

Extensive testing of a patient, GP, who encountered large-scale destruction of left-hemisphere (LH) language regions was undertaken in order to address several issues concerning the ability of nonperisylvian areas to extract meaning from printed words. Testing revealed recognition of superordinate boundaries of animals, tools, vegetables, fruit, clothes, and furniture. GP was able to distinguish proper names from other nouns and from nonwords. GP was also able to differentiate words representing living things from those denoting nonliving things. The extent of LH infarct resulting in a global impairment to phonological and syntactic processing suggests LH specificity for these functions but considerable right-hemisphere (RH) participation in visual lexicosemantic processing. The relative preservation of visual lexicosemantic abilities despite severe impairment to all aspects of phonological coding demonstrates the importance of the direct route to the meaning of single printed words.

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... analysis methodology being used. (5) The employer shall establish a system to promptly address the team's... the decision as to the appropriate PHA methodology to use. All PHA methodologies are subject to... be developed in conjunction with the process hazard analysis in sufficient detail to support the...

Methodology of Diagnostics of Interethnic Relations and Ethnosocial Processes

ERIC Educational Resources Information Center

Maximova, Svetlana G.; Noyanzina, Oksana Ye.; Omelchenko, Daria A.; Maximov, Maxim B.; Avdeeva, Galina C.

2016-01-01

The purpose of this study was to research the methodological approaches to the study of interethnic relations and ethno-social processes. The analysis of the literature was conducted in three main areas: 1) the theoretical and methodological issues of organizing the research of inter-ethnic relations, allowing to highlight the current…

Applying Statistical Process Quality Control Methodology to Educational Settings.

ERIC Educational Resources Information Center

Blumberg, Carol Joyce

A subset of Statistical Process Control (SPC) methodology known as Control Charting is introduced. SPC methodology is a collection of graphical and inferential statistics techniques used to study the progress of phenomena over time. The types of control charts covered are the null X (mean), R (Range), X (individual observations), MR (moving…

A Matrix Approach to Software Process Definition

NASA Technical Reports Server (NTRS)

Schultz, David; Bachman, Judith; Landis, Linda; Stark, Mike; Godfrey, Sally; Morisio, Maurizio; Powers, Edward I. (Technical Monitor)

2000-01-01

The Software Engineering Laboratory (SEL) is currently engaged in a Methodology and Metrics program for the Information Systems Center (ISC) at Goddard Space Flight Center (GSFC). This paper addresses the Methodology portion of the program. The purpose of the Methodology effort is to assist a software team lead in selecting and tailoring a software development or maintenance process for a specific GSFC project. It is intended that this process will also be compliant with both ISO 9001 and the Software Engineering Institute's Capability Maturity Model (CMM). Under the Methodology program, we have defined four standard ISO-compliant software processes for the ISC, and three tailoring criteria that team leads can use to categorize their projects. The team lead would select a process and appropriate tailoring factors, from which a software process tailored to the specific project could be generated. Our objective in the Methodology program is to present software process information in a structured fashion, to make it easy for a team lead to characterize the type of software engineering to be performed, and to apply tailoring parameters to search for an appropriate software process description. This will enable the team lead to follow a proven, effective software process and also satisfy NASA's requirement for compliance with ISO 9001 and the anticipated requirement for CMM assessment. This work is also intended to support the deployment of sound software processes across the ISC.

Using experts feedback in clinical case resolution and arbitration as accuracy diagnosis methodology.

PubMed

Rodríguez-González, Alejandro; Torres-Niño, Javier; Valencia-Garcia, Rafael; Mayer, Miguel A; Alor-Hernandez, Giner

2013-09-01

This paper proposes a new methodology for assessing the efficiency of medical diagnostic systems and clinical decision support systems by using the feedback/opinions of medical experts. The methodology behind this work is based on a comparison between the expert feedback that has helped solve different clinical cases and the expert system that has evaluated these same cases. Once the results are returned, an arbitration process is carried out in order to ensure the correctness of the results provided by both methods. Once this process has been completed, the results are analyzed using Precision, Recall, Accuracy, Specificity and Matthews Correlation Coefficient (MCC) (PRAS-M) metrics. When the methodology is applied, the results obtained from a real diagnostic system allow researchers to establish the accuracy of the system based on objective facts. The methodology returns enough information to analyze the system's behavior for each disease in the knowledge base or across the entire knowledge base. It also returns data on the efficiency of the different assessors involved in the evaluation process, analyzing their behavior in the diagnostic process. The proposed work facilitates the evaluation of medical diagnostic systems, having a reliable process based on objective facts. The methodology presented in this research makes it possible to identify the main characteristics that define a medical diagnostic system and their values, allowing for system improvement. A good example of the results provided by the application of the methodology is shown in this paper. A diagnosis system was evaluated by means of this methodology, yielding positive results (statistically significant) when comparing the system with the assessors that participated in the evaluation process of the system through metrics such as recall (+27.54%) and MCC (+32.19%). These results demonstrate the real applicability of the methodology used. Copyright © 2013 Elsevier Ltd. All rights reserved.

Absolute Salinity, ''Density Salinity'' and the Reference-Composition Salinity Scale: present and future use in the seawater standard TEOS-10

NASA Astrophysics Data System (ADS)

Wright, D. G.; Pawlowicz, R.; McDougall, T. J.; Feistel, R.; Marion, G. M.

2011-01-01

Salinity plays a key role in the determination of the thermodynamic properties of seawater and the new TEOS-101 standard provides a consistent and effective approach to dealing with relationships between salinity and these thermodynamic properties. However, there are a number of practical issues that arise in the application of TEOS-10, both in terms of accuracy and scope, including its use in the reduction of field data and in numerical models. First, in the TEOS-10 formulation for IAPSO Standard Seawater, the Gibbs function takes the Reference Salinity as its salinity argument, denoted SR, which provides a measure of the mass fraction of dissolved material in solution based on the Reference Composition approximation for Standard Seawater. We discuss uncertainties in both the Reference Composition and the Reference-Composition Salinity Scale on which Reference Salinity is reported. The Reference Composition provides a much-needed fixed benchmark but modified reference states will inevitably be required to improve the representation of Standard Seawater for some studies. However, the Reference-Composition Salinity Scale should remain unaltered to provide a stable representation of salinity for use with the TEOS-10 Gibbs function and in climate change detection studies. Second, when composition anomalies are present in seawater, no single salinity variable can fully represent the influence of dissolved material on the thermodynamic properties of seawater. We consider three distinct representations of salinity that have been used in previous studies and discuss the connections and distinctions between them. One of these variables provides the most accurate representation of density possible as well as improvements over Reference Salinity for the determination of other thermodynamic properties. It is referred to as "Density Salinity" and is represented by the symbol SAdens; it stands out as the most appropriate representation of salinity for use in dynamical physical oceanography. The other two salinity variables provide alternative measures of the mass fraction of dissolved material in seawater. "Solution Salinity", denoted SAsoln, is the most obvious extension of Reference Salinity to allow for composition anomalies; it provides a direct estimate of the mass fraction of dissolved material in solution. "Added-Mass Salinity", denoted SAadd, is motivated by a method used to report laboratory experiments; it represents the component of dissolved material added to Standard Seawater in terms of the mass of material before it enters solution. We also discuss a constructed conservative variable referred to as "Preformed Salinity", denoted S∗, which will be useful in process-oriented numerical modelling studies. Finally, a conceptual framework for the incorporation of composition anomalies in numerical models is presented that builds from studies in which composition anomalies are simply ignored up to studies in which the influences of composition anomalies are accounted for using the results of biogeochemical models. 1TEOS-10: international Thermodynamic Equation of Seawater 2010, http://www.teos-10.org/.

Absolute Salinity, "Density Salinity" and the Reference-Composition Salinity Scale: present and future use in the seawater standard TEOS-10

NASA Astrophysics Data System (ADS)

Wright, D. G.; Pawlowicz, R.; McDougall, T. J.; Feistel, R.; Marion, G. M.

2010-08-01

Salinity plays a key role in the determination of the thermodynamic properties of seawater and the new TEOS-101 standard provides a consistent and effective approach to dealing with relationships between salinity and these thermodynamic properties. However, there are a number of practical issues that arise in the application of TEOS-10, both in terms of accuracy and scope, including its use in the reduction of field data and in numerical models. First, in the TEOS-10 formulation for IAPSO Standard Seawater, the Gibbs function takes the Reference Salinity as its salinity argument, denoted SR, which provides a measure of the mass fraction of dissolved material in solution based on the Reference Composition approximation for Standard Seawater. We discuss uncertainties in both the Reference Composition and the Reference-Composition Salinity Scale on which Reference Salinity is reported. The Reference Composition provides a much-needed fixed benchmark but modified reference states will inevitably be required to improve the representation of Standard Seawater for some studies. The Reference-Composition Salinity Scale should remain unaltered to provide a stable representation of salinity for use with the TEOS-10 Gibbs function and in climate change detection studies. Second, when composition anomalies are present in seawater, no single salinity variable can fully represent the influence of dissolved material on the thermodynamic properties of seawater. We consider three distinct representations of salinity that have been used in previous studies and discuss the connections and distinctions between them. One of these variables provides the most accurate representation of density possible as well as improvements over Reference Salinity for the determination of other thermodynamic properties. It is referred to as "Density Salinity" and is represented by the symbol SAdens; it stands out as the most appropriate representation of salinity for use in dynamical physical oceanography. The other two salinity variables provide alternative measures of the mass fraction of dissolved material in seawater. "Solution Salinity", denoted SAsoln, is the most obvious extension of Reference Salinity to allow for composition anomalies; it provides a direct estimate of the mass fraction of dissolved material in solution. "Added-Mass Salinity", denoted SAadd, is motivated by a method used to report laboratory experiments; it represents the component of dissolved material added to Standard Seawater in terms of the mass of material before it enters solution. We also discuss a constructed conservative variable referred to as "Preformed Salinity", denoted S*, which will be useful in process-oriented numerical modelling studies. Finally, a conceptual framework for the incorporation of composition anomalies in numerical models is presented that builds from studies in which composition anomalies are simply ignored up to studies in which the influences of composition anomalies are accounted for using the results of biogeochemical models. 1TEOS-10: international thermodynamic equation of seawater 2010, http://www.teos-10.org.

Comment on "An Assessment of the ICE-6G_C (VM5a) Glacial Isostatic Adjustment Model" by Purcell et al.

NASA Astrophysics Data System (ADS)

Richard Peltier, W.; Argus, Donald F.; Drummond, Rosemarie

2018-02-01

The most recently published model of the glacial isostatic adjustment process in the ICE-NG (VMX) sequence from the University of Toronto, denoted ICE-6G_C (VM5a), was originally developed to degree and order 256 in spherical harmonics and has been shown to provide accurate fits to a voluminous database of GPS observations from North America, Eurasia, and Antarctica, to time dependent gravity data being provided by the GRACE satellites, and to radiocarbon-dated relative sea level histories through the Holocene epoch. The authors of the Purcell et al. (2016, https://doi.org/10.1002/2015JB012742) paper have suggested this model to be flawed. We have produced a further version of our model, denoted ICE-6G_D (VM5a), by employing the same BEDMAP2 bathymetry for the Southern Ocean as employed in their analysis which has somewhat reduced the differences between our results. However, significant physically important differences remain, including the magnitude of present-day vertical crustal motion in the embayments and in the spectrum of Stokes coefficients for present-day geoid height time dependence which continues to "flatten" at high spherical harmonic degree. We explore the reasons for these differences and trace them to the use by Purcell et al. of a loading history for the embayments that differs significantly from that tabulated for both the original and modified versions of our model.

Ag-nanoparticles-decorated NiO-nanoflakes grafted Ni-nanorod arrays stuck out of porous AAO as effective SERS substrates.

PubMed

Zhou, Qitao; Meng, Guowen; Huang, Qing; Zhu, Chuhong; Tang, Haibin; Qian, Yiwu; Chen, Bin; Chen, Bensong

2014-02-28

NiO-nanoflakes (NiO-NFs) grafted Ni-nanorod (Ni-NR) arrays stuck out of the porous anodic aluminum oxide (AAO) template are achieved by a combinatorial process of AAO-confined electrodeposition of Ni-NRs, selectively etching part of the AAO template to expose the Ni-NRs, wet-etching the exposed Ni-NRs in ammonia to obtain Ni(OH)2-NFs grafted onto the cone-shaped Ni-NRs, and annealing to transform Ni(OH)2-NFs in situ into NiO-NFs. By top-view sputtering, Ag-nanoparticles (Ag-NPs) are decorated on each NiO-NFs grafted Ni-NR (denoted as NiO-NFs@Ni-NR). The resultant Ag-NPs-decorated NiO-NFs@Ni-NR (denoted as Ag-NPs@NiO-NFs@Ni-NR) arrays exhibit not only strong surface-enhanced Raman scattering (SERS) activity but also reproducible SERS-signals over the whole array. It is demonstrated that the strong SERS-activity is mainly ascribed to the high density of sub-10 nm gaps (hot spots) between the neighboring Ag-NPs, the semiconducting NiO-NFs induced chemical enhancement effect, and the lightning rod effect of the cone-shaped Ni-NRs. The three-level hierarchical nanostructure arrays stuck out of the AAO template can be utilized to probe polychlorinated biphenyls (PCBs, a kind of global environmental hazard) with a concentration as low as 5 × 10(-6) M, showing promising potential in SERS-based rapid detection of organic environmental pollutants.

Marxism in Vygotskian approaches to cultural studies of science education

NASA Astrophysics Data System (ADS)

Lima Junior, Paulo; Ostermann, Fernanda; Rezende, Flavia

2014-09-01

In this paper we initially address the main categories of Marxism, illustrating how Vygotsky has appropriated them as mediational meta-theoretical tools for building concepts for his psychological approach. In order to investigate the influence of Marxism in cultural studies of science education, we make an account of how current research, sustained by Vygotsky's original and successor theories, has been appropriating meta-theoretical categories of dialectical materialism. Once we identified Cultural Studies of Science Education as a journal that would probably concentrate papers that follow these perspectives, we decided to take it as the context of this study. In the process of selecting the corpus to be reviewed from the editions published from 2006 to 2011, we have found that 16 % of the articles that matched keywords denoting frameworks related to the Vygotskian tradition developed and appropriated the categories of dialectical materialism. The quality and originality of contemporary development of CHAT denote that this framework has been playing a very important role in recent expansion of Vygotskian approaches to research in science education. Among the papers that we considered to develop and appropriate Vygotskian frameworks, incompletion in the appropriation of meta-theoretical categories of dialectical materialism and the misusage of dialectics intertwined with dialogism were highlighted. Our findings suggest that overcoming these limitations can enhance political analysis of sociocultural phenomena in the context of science education. It also represents a strengthening of the role of dialectical materialism in expanding sociocultural perspectives toward a better articulation between individual and institutional-centered analyses.

New insights into name category-related effects: is the Age of Acquisition a possible factor?

PubMed

Adorni, Roberta; Proverbio, Alice Mado

2009-07-29

Electrophysiological, hemodynamic and neuropsychological studies have provided evidence of dissociation in the way words belonging to different semantic categories (e.g., animals, tools, actions) are represented in the brain. The aim of the present study was to investigate whether a word's semantic domain may affect the amplitude and latency of ERP components, independently of any other factor. EEGs were recorded from 16 volunteers engaged in a lexical decision task (word/non-word discrimination) involving 100 words (flora and fauna names). This task allowed us to evaluate differences in processing between words belonging to different categories (fauna vs. flora) independently of task demands. All stimuli were balanced in terms of length, frequency of occurrence, familiarity and imageability. Low Resolution Electromagnetic Tomography (LORETA) was performed on ERP difference waves of interest. Our findings showed that the two categories were discriminated as early as 200 ms post-stimulus, with larger responses to flora names over the left occipito-temporal areas, namely BA37 and BA20. Category-related ERP differences were also observed in the amplitudes of the later centro-parietal N400, posterior P300 and anterior LP components. Behavioral responses to words denoting fauna were more accurate than to words denoting flora. Overall, it seems that it was easier to access the lexical properties of fauna, probably because of their biologically relevant status. The results are discussed in the light of the possible role played by different factors.

Querying databases of trajectories of differential equations: Data structures for trajectories

NASA Technical Reports Server (NTRS)

Grossman, Robert

1989-01-01

One approach to qualitative reasoning about dynamical systems is to extract qualitative information by searching or making queries on databases containing very large numbers of trajectories. The efficiency of such queries depends crucially upon finding an appropriate data structure for trajectories of dynamical systems. Suppose that a large number of parameterized trajectories gamma of a dynamical system evolving in R sup N are stored in a database. Let Eta is contained in set R sup N denote a parameterized path in Euclidean Space, and let the Euclidean Norm denote a norm on the space of paths. A data structure is defined to represent trajectories of dynamical systems, and an algorithm is sketched which answers queries.

Rational-Spline Subroutines

NASA Technical Reports Server (NTRS)

Schiess, James R.; Kerr, Patricia A.; Smith, Olivia C.

1988-01-01

Smooth curves drawn among plotted data easily. Rational-Spline Approximation with Automatic Tension Adjustment algorithm leads to flexible, smooth representation of experimental data. "Tension" denotes mathematical analog of mechanical tension in spline or other mechanical curve-fitting tool, and "spline" as denotes mathematical generalization of tool. Program differs from usual spline under tension, allows user to specify different values of tension between adjacent pairs of knots rather than constant tension over entire range of data. Subroutines use automatic adjustment scheme that varies tension parameter for each interval until maximum deviation of spline from line joining knots less than or equal to amount specified by user. Procedure frees user from drudgery of adjusting individual tension parameters while still giving control over local behavior of spline.

Corrigendum: The Ehrlich–Schwoebel barrier on an oxide surface: a combined Monte-Carlo and in situ scanning tunneling microscopy approach (2015 Nanotechnology 45 455705)

DOE PAGES

Vasudevan, Rama K.; Tselev, Alexander; Baddorf, Arthur P.; ...

2016-03-23

For this corrigendum, it has been brought to our attention by T R J Bollmann (University of Twente) of typographic errors in our recently submitted manuscript that make reading and understanding of the model difficult. Finally, on Page 4, the text immediately after equation (2), 'where k is an integer denoting one of the five possible' should be modified to read 'where k is an integer denoting the possible steps that can be taken by the adatom (including the possibility of no step), e.g. five possible in the case of the symmetries available in this case'.

Proving refinement transformations using extended denotational semantics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winter, V.L.; Boyle, J.M.

1996-04-01

TAMPR is a fully automatic transformation system based on syntactic rewrites. Our approach in a correctness proof is to map the transformation into an axiomatized mathematical domain where formal (and automated) reasoning can be performed. This mapping is accomplished via an extended denotational semantic paradigm. In this approach, the abstract notion of a program state is distributed between an environment function and a store function. Such a distribution introduces properties that go beyond the abstract state that is being modeled. The reasoning framework needs to be aware of these properties in order to successfully complete a correctness proof. This papermore » discusses some of our experiences in proving the correctness of TAMPR transformations.« less

Development of an Optimization Methodology for the Aluminum Alloy Wheel Casting Process

NASA Astrophysics Data System (ADS)

Duan, Jianglan; Reilly, Carl; Maijer, Daan M.; Cockcroft, Steve L.; Phillion, Andre B.

2015-08-01

An optimization methodology has been developed for the aluminum alloy wheel casting process. The methodology is focused on improving the timing of cooling processes in a die to achieve improved casting quality. This methodology utilizes (1) a casting process model, which was developed within the commercial finite element package, ABAQUS™—ABAQUS is a trademark of Dassault Systèms; (2) a Python-based results extraction procedure; and (3) a numerical optimization module from the open-source Python library, Scipy. To achieve optimal casting quality, a set of constraints have been defined to ensure directional solidification, and an objective function, based on the solidification cooling rates, has been defined to either maximize, or target a specific, cooling rate. The methodology has been applied to a series of casting and die geometries with different cooling system configurations, including a 2-D axisymmetric wheel and die assembly generated from a full-scale prototype wheel. The results show that, with properly defined constraint and objective functions, solidification conditions can be improved and optimal cooling conditions can be achieved leading to process productivity and product quality improvements.

Interference and facilitation in overt speech production investigated with event-related potentials.

PubMed

Hirschfeld, Gerrit; Jansma, Bernadette; Bölte, Jens; Zwitserlood, Pienie

2008-08-06

We report an event-related potential study investigating the neural basis of interference and facilitation in the picture-word interference paradigm with immediate overt naming. We used the high temporal resolution of the electrophysiological response to dissociate general and specific interference processes, by comparing unrelated word distractors to nonlinguistic (a row of Xs), surface feature denoting, and category member distractors. Our results first indicate that the increased naming latencies for linguistic relative to nonlinguistic distractors are because of general conflict-monitoring processes, associated with early event-related potential effects (120-220 ms) and increased activity in the anterior cingulate cortex. Next, distractors specifying a surface feature of the picture seem to facilitate its identification within the same time window, which involves widespread networks. Finally, nonlinguistic and surface feature distractors also reduced the N400 amplitude, relative to unrelated word distractors. Taken together our results support the view that several distinct processes give rise to the reaction time results often observed in picture naming.

Mathematical values in the processing of Chinese numeral classifiers and measure words.

PubMed

Her, One-Soon; Chen, Ying-Chun; Yen, Nai-Shing

2017-01-01

A numeral classifier is required between a numeral and a noun in Chinese, which comes in two varieties, sortal classifer (C) and measural classifier (M), also known as 'classifier' and 'measure word', respectively. Cs categorize objects based on semantic attributes and Cs and Ms both denote quantity in terms of mathematical values. The aim of this study was to conduct a psycholinguistic experiment to examine whether participants process C/Ms based on their mathematical values with a semantic distance comparison task, where participants judged which of the two C/M phrases was semantically closer to the target C/M. Results showed that participants performed more accurately and faster for C/Ms with fixed values than the ones with variable values. These results demonstrated that mathematical values do play an important role in the processing of C/Ms. This study may thus shed light on the influence of the linguistic system of C/Ms on magnitude cognition.

A nitric oxide concentration clamp.

PubMed

Zhelyaskov, V R; Godwin, D W

1999-10-01

We report a new method of generating nitric oxide (NO) that possesses several advantages for experimental use. This method consists of a photolysis chamber where NO is released by illuminating photolabile NO donors with light from a xenon lamp, in conjunction with feedback control. Control of the photolysis light was achieved by selectively gating light projected through a shutter before the light was launched into a light guide that conveyed the light to the photolysis chamber. By gating the light in proportion to a sensor that reported nearly instantaneous concentration from the photolysis chamber, a criterion NO concentration could be achieved, which could be easily adjusted to higher or lower criterion levels. To denote the similarity of this process with the electrophysiological process of voltage clamp, we term this process a concentration "clamp." This development enhances the use of the fiber-optic-based system for NO delivery and should enable the execution of experiments where the in situ concentration of NO is particularly critical, such as in biological preparations. Copyright 1999 Academic Press.

Thermal nanostructure: An order parameter multiscale ensemble approach

NASA Astrophysics Data System (ADS)

Cheluvaraja, S.; Ortoleva, P.

2010-02-01

Deductive all-atom multiscale techniques imply that many nanosystems can be understood in terms of the slow dynamics of order parameters that coevolve with the quasiequilibrium probability density for rapidly fluctuating atomic configurations. The result of this multiscale analysis is a set of stochastic equations for the order parameters whose dynamics is driven by thermal-average forces. We present an efficient algorithm for sampling atomistic configurations in viruses and other supramillion atom nanosystems. This algorithm allows for sampling of a wide range of configurations without creating an excess of high-energy, improbable ones. It is implemented and used to calculate thermal-average forces. These forces are then used to search the free-energy landscape of a nanosystem for deep minima. The methodology is applied to thermal structures of Cowpea chlorotic mottle virus capsid. The method has wide applicability to other nanosystems whose properties are described by the CHARMM or other interatomic force field. Our implementation, denoted SIMNANOWORLD™, achieves calibration-free nanosystem modeling. Essential atomic-scale detail is preserved via a quasiequilibrium probability density while overall character is provided via predicted values of order parameters. Applications from virology to the computer-aided design of nanocapsules for delivery of therapeutic agents and of vaccines for nonenveloped viruses are envisioned.

Moving sociohydrology forward: a synthesis across studies

NASA Astrophysics Data System (ADS)

Troy, T. J.; Konar, M.; Srinivasan, V.; Thompson, S.

2015-08-01

Sociohydrology is the study of coupled human-water systems, building on the premise that water and human systems co-evolve: the state of the water system feeds back onto the human system, and vice versa, a situation denoted as "two-way coupling". A recent special issue in HESS/ESD, "Predictions under change: water, earth, and biota in the Anthropocene", includes a number of sociohydrologic publications that allow for a survey of the current state of understanding of sociohydrology and the dynamics and feedbacks that couple water and human systems together, of the research methodologies being employed to date, and of the normative and ethical issues raised by the study of sociohydrologic systems. Although sociohydrology is concerned with coupled human-water systems, the feedback may be filtered by a connection through natural or social systems, for example, the health of a fishery or through the global food trade, and therefore it may not always be possible to treat the human-water system in isolation. As part of a larger complex system, sociohydrology can draw on tools developed in the social-ecological and complex systems literature to further our sociohydrologic knowledge, and this is identified as a ripe area of future research.

Standardization of a Volumetric Displacement Measurement for Two-Body Abrasion Scratch Test Data Analysis

NASA Technical Reports Server (NTRS)

Kobrick, Ryan L.; Klaus, David M.; Street, Kenneth W., Jr.

2010-01-01

A limitation has been identified in the existing test standards used for making controlled, two-body abrasion scratch measurements based solely on the width of the resultant score on the surface of the material. A new, more robust method is proposed for analyzing a surface scratch that takes into account the full three-dimensional profile of the displaced material. To accomplish this, a set of four volume displacement metrics are systematically defined by normalizing the overall surface profile to statistically denote the area of relevance, termed the Zone of Interaction (ZOI). From this baseline, depth of the trough and height of the ploughed material are factored into the overall deformation assessment. Proof of concept data were collected and analyzed to demonstrate the performance of this proposed methodology. This technique takes advantage of advanced imaging capabilities that now allow resolution of the scratched surface to be quantified in greater detail than was previously achievable. A quantified understanding of fundamental particle-material interaction is critical to anticipating how well components can withstand prolonged use in highly abrasive environments, specifically for our intended applications on the surface of the Moon and other planets or asteroids, as well as in similarly demanding, harsh terrestrial settings

Objective Assessment of Image Quality VI: Imaging in Radiation Therapy

PubMed Central

Barrett, Harrison H.; Kupinski, Matthew A.; Müeller, Stefan; Halpern, Howard J.; Morris, John C.; Dwyer, Roisin

2015-01-01

Earlier work on Objective Assessment of Image Quality (OAIQ) focused largely on estimation or classification tasks in which the desired outcome of imaging is accurate diagnosis. This paper develops a general framework for assessing imaging quality on the basis of therapeutic outcomes rather than diagnostic performance. By analogy to Receiver Operating Characteristic (ROC) curves and their variants as used in diagnostic OAIQ, the method proposed here utilizes the Therapy Operating Characteristic or TOC curves, which are plots of the probability of tumor control vs. the probability of normal-tissue complications as the overall dose level of a radiotherapy treatment is varied. The proposed figure of merit is the area under the TOC curve, denoted AUTOC. This paper reviews an earlier exposition of the theory of TOC and AUTOC, which was specific to the assessment of image-segmentation algorithms, and extends it to other applications of imaging in external-beam radiation treatment as well as in treatment with internal radioactive sources. For each application, a methodology for computing the TOC is presented. A key difference between ROC and TOC is that the latter can be defined for a single patient rather than a population of patients. PMID:24200954

Gold metal liquid-like droplets.

PubMed

Smirnov, Evgeny; Scanlon, Micheál D; Momotenko, Dmitry; Vrubel, Heron; Méndez, Manuel A; Brevet, Pierre-Francois; Girault, Hubert H

2014-09-23

Simple methods to self-assemble coatings and films encompassing nanoparticles are highly desirable in many practical scenarios, yet scarcely any examples of simple, robust approaches to coat macroscopic droplets with continuous, thick (multilayer), reflective and stable liquid nanoparticle films exist. Here, we introduce a facile and rapid one-step route to form films of reflective liquid-like gold that encase macroscopic droplets, and we denote these as gold metal liquid-like droplets (MeLLDs). The present approach takes advantage of the inherent self-assembly of gold nanoparticles at liquid-liquid interfaces and the increase in rates of nanoparticle aggregate trapping at the interface during emulsification. The ease of displacement of the stabilizing citrate ligands by appropriate redox active molecules that act as a lubricating molecular glue is key. Specifically, the heterogeneous interaction of citrate stabilized aqueous gold nanoparticles with the lipophilic electron donor tetrathiafulvalene under emulsified conditions produces gold MeLLDs. This methodology relies exclusively on electrochemical reactions, i.e., the oxidation of tetrathiafulvalene to its radical cation by the gold nanoparticle, and electrostatic interactions between the radical cation and nanoparticles. The gold MeLLDs are reversibly deformable upon compression and decompression and kinetically stable for extended periods of time in excess of a year.

Investigating gender differences in alcohol problems: a latent trait modeling approach.

PubMed

Nichol, Penny E; Krueger, Robert F; Iacono, William G

2007-05-01

Inconsistent results have been found in research investigating gender differences in alcohol problems. Previous studies of gender differences used a wide range of methodological techniques, as well as limited assortments of alcohol problems. Parents (1,348 men and 1,402 women) of twins enrolled in the Minnesota Twin Family Study answered questions about a wide range of alcohol problems. A latent trait modeling technique was used to evaluate gender differences in the probability of endorsement at the problem level and for the overall 105-problem scale. Of the 34 problems that showed significant gender differences, 29 were more likely to be endorsed by men than women with equivalent overall alcohol problem levels. These male-oriented symptoms included measures of heavy drinking, duration of drinking, tolerance, and acting out behaviors. Nineteen symptoms were denoted for removal to create a scale that favored neither gender in assessment. Significant gender differences were found in approximately one-third of the symptoms assessed and in the overall scale. Further examination of the nature of gender differences in alcohol problem symptoms should be undertaken to investigate whether a gender-neutral scale should be created or if men and women should be assessed with separate criteria for alcohol dependence and abuse.

Using continuous process improvement methodology to standardize nursing handoff communication.

PubMed

Klee, Kristi; Latta, Linda; Davis-Kirsch, Sallie; Pecchia, Maria

2012-04-01

The purpose of this article was to describe the use of continuous performance improvement (CPI) methodology to standardize nurse shift-to-shift handoff communication. The goals of the process were to standardize the content and process of shift handoff, improve patient safety, increase patient and family involvement in the handoff process, and decrease end-of-shift overtime. This article will describe process changes made over a 4-year period as result of application of the plan-do-check-act procedure, which is an integral part of the CPI methodology, and discuss further work needed to continue to refine this critical nursing care process. Copyright © 2012 Elsevier Inc. All rights reserved.

Spatial Phase Coding for Incoherent Optical Processors

NASA Technical Reports Server (NTRS)

Tigin, D. V.; Lavrentev, A. A.; Gary, C. K.

1994-01-01

In this paper we introduce spatial phase coding of incoherent optical signals for representing signed numbers in optical processors and present an experimental demonstration of this coding technique. If a diffraction grating, such as an acousto-optic cell, modulates a stream of light, the image of the grating can be recovered from the diffracted beam. The position of the grating image, or more precisely its phase, can be used to denote the sign of the number represented by the diffracted light. The intensity of the light represents the magnitude of the number. This technique is more economical than current methods in terms of the number of information channels required to represent a number and the amount of post processing required.

Collaborative Filtering Based on Sequential Extraction of User-Item Clusters

NASA Astrophysics Data System (ADS)

Honda, Katsuhiro; Notsu, Akira; Ichihashi, Hidetomo

Collaborative filtering is a computational realization of “word-of-mouth” in network community, in which the items prefered by “neighbors” are recommended. This paper proposes a new item-selection model for extracting user-item clusters from rectangular relation matrices, in which mutual relations between users and items are denoted in an alternative process of “liking or not”. A technique for sequential co-cluster extraction from rectangular relational data is given by combining the structural balancing-based user-item clustering method with sequential fuzzy cluster extraction appraoch. Then, the tecunique is applied to the collaborative filtering problem, in which some items may be shared by several user clusters.

Institutional design and utilization of evaluation: a contribution to a theory of evaluation influence based on Swiss experience.

PubMed

Balthasar, Andreas

2009-06-01

Growing interest in the institutionalization of evaluation in the public administration raises the question as to which institutional arrangement offers optimal conditions for the utilization of evaluations. Institutional arrangement denotes the formal organization of processes and competencies, together with procedural rules, that are applicable independently of individual evaluation projects. It reflects the evaluation practice of an institution and defines the distance between evaluators and evaluees. This article outlines the results of a broad-based study of all 300 or so evaluations that the Swiss Federal Administration completed from 1999 to 2002. On this basis, it derives a theory of the influence of institutional factors on the utilization of evaluations.

Potential Functions and the Characterization of Economics-Based Information

NASA Astrophysics Data System (ADS)

Haven, Emmanuel

2015-10-01

The formulation of quantum mechanics as a diffusion process by Nelson (Phys Rev 150:1079-1085, 1966) provides for an interesting approach on how we may transit from classical mechanics into quantum mechanics. Besides the presence of the real potential function, another type of potential function (often denoted as `quantum potential') forms an intrinsic part of this theory. In this paper we attempt to show how both types of potential functions can have a use in a resolutely macroscopic context like financial asset pricing. We are particularly interested in uncovering how the `quantum potential' can add to the economics-based relevant information which is already supplied by the real potential function.

Agile Software Development in the Department of Defense Environment

DTIC Science & Technology

2017-03-31

Research Methodology .............................................................................................. 17 Research Hypothesis...acquisition framework to enable greater adoption of Agile methodologies . Overview of the Research Methodology The strategy for this study was to...guidance. 17 Chapter 3 – Research Methodology This chapter defines the research methodology and processes used in the study, in an effort to

On the total rainbow connection of the wheel related graphs

NASA Astrophysics Data System (ADS)

Hasan, M. S.; Slamin; Dafik; Agustin, I. H.; Alfarisi, R.

2018-04-01

Let G = (V(G), E(G)) be a nontrivial connected graph with an edge coloring c : E(G) → {1, 2, …, l}, l ɛ N, with the condition that the adjacent edges may be colored by the same colors. A path P in G is called rainbow path if no two edges of P are colored the same. The smallest number of colors that are needed to make G rainbow edge-connected is called the rainbow edge-connection of G, denoted by rc(G). A vertex-colored graph is rainbow vertex-connected if any two vertices are connected by a path whose internal vertices have distinct colors. The smallest number of colors that are needed to make G rainbow vertex-connected is called the rainbow vertex-connection of G, denoted by rvc(G). A total-colored path is total-rainbow if edges and internal vertices have distinct colours. The minimum number of colour required to color the edges and vertices of G is called the total rainbow connection number of G, denoted by trc(G). In this paper, we determine the total rainbow connection number of some wheel related graphs such as gear graph, antiweb-gear graph, infinite class of convex polytopes, sunflower graph, and closed-sunflower graph.

Homochiral coordination polymers with helixes and metal clusters based on lactate derivatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Zhong-Xuan, E-mail: xuzhongxuan4201@163.com; Ma, Yu-Lu; Lv, Guo-ling

2017-05-15

Utilizing the lactic acid derivatives (R)-4-(1-carboxyethoxy)benzoic acid (denoted: (R)-H{sub 2}CBA) and (S)-4-(1-carboxyethoxy)benzoic acid (denoted: (S)-H{sub 2}CBA)as chiral linkers to self-assemble with 4, 4′-bipyridine (denoted: BIP) and Cd(II) ions, a couple of three-dimensional homochiral coordination polymers, namely [Cd{sub 3}((R)-CBA){sub 3} (BIP){sub 2}(H{sub 2}O)]·xGuest (1-D) and [Cd{sub 3}((S)-CBA){sub 3}(BIP){sub 2}(H{sub 2}O)]·xGuest (1-L), have been synthesized under solvothermal reaction condition. Single crystal X-ray diffraction analysis reveals the two complexes contain single helical chains based on enantiopure ligands and cadmium clusters. Moreover, some physical characteristics such as PXRD, thermal stability, solid-state circular dichroism (CD) and luminescent were also investigated. - Graphical abstract: Utilizing enantiomericmore » lactic acid derivatives (R)-H{sub 2}CBA and (S)-H{sub 2}CBA to assemble with Cd{sup 2+} ions and ancillary BIP ligands, a couple of 3D homochiral coordination polymers with metal clusters and helical chains have been prepared by hydrothermal reaction. - Highlights: • Chiral lactic acid derivative. • Enantiomeric coordination polymer. • Helical chain. • Trinuclear cadmium cluster.« less

Novel adipokinetic hormones in the kissing bugs Rhodnius prolixus, Triatoma infestans, Dipetalogaster maxima and Panstrongylus megistus.

PubMed

Marco, Heather G; Simek, Petr; Clark, Kevin D; Gäde, Gerd

2013-03-01

Peptides of the adipokinetic hormone (AKH)/red pigment-concentrating hormone (RPCH) family were isolated and sequenced from the retrocerebral corpora cardiaca of four kissing bugs which are all vectors of the protozoan Trypanosoma cruzi responsible for Chagas' disease. The sequence of three novel AKHs were deduced from the multiple MS(N) electrospray mass data: the octapeptide pGlu-Leu-Thr-Phe-Ser-Thr-Asp-Trp amide (denoted Rhopr-AKH) in Rhodnius prolixus and Panstrongylus megistus, the nonapeptide pGlu-Leu-Thr-Phe-Thr-Pro-Asn-Trp-Gly amide (denoted Triin-AKH) in Triatoma infestans and the decapeptide pGlu-Leu-Thr-Phe-Ser-Asp-Gly-Trp-Gly-Asn amide (denoted Dipma-AKH) in Dipetalogaster maxima. The sequences were confirmed by identical behavior of natural and synthetic forms in reversed-phase HPLC and by CID-MS mass spectra. Conspecific injections of a dose of 10 pmol of the respective synthetic peptides resulted in a small but significant increase of the lipid concentration in the hemolymph. These experiments suggest that AKHs in kissing bugs act to regulate lipid metabolism, possibly during dispersal flights which is one of the mechanisms whereby the insects reach new outbreak areas. Copyright © 2012 Elsevier Inc. All rights reserved.

Chemical Stability and Biological Properties of Plasma-Sprayed CaO-SiO2-ZrO2 Coatings

NASA Astrophysics Data System (ADS)

Liang, Ying; Xie, Youtao; Ji, Heng; Huang, Liping; Zheng, Xuebin

2010-12-01

In this work, calcia-stabilized zirconia powders were coated by silica derived from tetraethoxysilane (TEOS) hydrolysis. After calcining at 1400 °C, decalcification of calcia-stabilized zirconia by silica occurred and powders composed of Ca2SiO4, ZrO2, and CaZrO3 were prepared. We produced three kinds of powders with different Ca2SiO4 contents [20 wt.% (denoted as CZS2), 40 wt.% (denoted as CZS4), and 60 wt.% (denoted as CZS6)]. The obtained powders were sprayed onto Ti-6Al-4V substrates using atmospheric plasma spraying. The microstructure of the powders and coatings were analyzed. The dissolution rates of the coatings were assessed by monitoring the ions release and mass losses after immersion in Tris-HCl buffer solution. Results showed that the chemical stability of the coatings were significantly improved compared with pure calcium silicate coatings, and increased with the increase of Zr contents. The CZS4 coating showed not only good apatite-formation ability in simulated body fluid, but also well attachment and proliferation capability for the canine bone marrow stem cells. Results presented here indicate that plasma-sprayed CZS4 coating has medium dissolution rate and good biological properties, suggesting its potential use as bone implants.

Distributed Software for Observations in the Near Infrared

NASA Astrophysics Data System (ADS)

Gavryusev, V.; Baffa, C.; Giani, E.

We have developed an integrated system that performs astronomical observations in Near Infrared bands operating two-dimensional instruments at the Italian National Infrared Facility's \\htmllink{ARNICA}{http://helios.arcetri.astro.it:/home/idefix/Mosaic/ instr/arnica/arnica.html} and \\htmllink{LONGSP}{http://helios.arcetri.astro.it:/home/idefix/Mosaic/ instr/longsp/longsp.html}. This software consists of several communicating processes, generally executed across a network, as well as on a single computer. The user interface is organized as widget-based X11 client. The interprocess communication is provided by sockets and uses TCP/IP. The processes denoted for control of hardware (telescope and other instruments) should be executed currently on a PC dedicated for this task under DESQview/X, while all other components (user interface, tools for the data analysis, etc.) can also work under UNIX\\@. The hardware independent part of software is based on the Athena Widget Set and is compiled by GNU C to provide maximum portability.

Gauge invariant perturbations of the Schwarzschild spacetime

NASA Astrophysics Data System (ADS)

Thompson, Jonathan E.; Chen, Hector; Whiting, Bernard F.

2017-09-01

Beginning with the pioneering work of Regge and Wheeler (1957 Phys. Rev. 108 1063), there have been many studies of perturbations away from the Schwarzschild spacetime background. In particular several authors Moncrief (1974 Ann. Phys. 88 323), Sachs (1964 Relativity, Groups and Topology (New York: Gordon and Breach)) and Brizuela et al (2007 Phys. Rev. D 76 024004) have investigated gauge invariant quantities of the Regge-Wheeler (RW) formalism. Steven Detweiler also investigated perturbations of Schwarzschild in his own formalism, introducing his own gauge choice which he denoted the ‘easy (EZ) gauge’, and which he was in the process of adapting for use in the second-order self-force problem. We present here a compilation of some of his working results, arising from notes for which there seems to have been no manuscript in preparation. In particular, we outline Detweiler’s formalism, list the gauge invariant quantities he used, and explain the process by which he found them.

Preparation of Pt Nanocatalyst on Carbon Materials via a Reduction Reaction of a Pt Precursor in a Drying Process.

PubMed

Lee, Jae-Young; Lee, Woo-Kum; Rim, Hyung-Ryul; Joung, Gyu-Bum; Weidner, John W; Lee, Hong-Ki

2016-06-01

Platinum (Pt) nanocatalyst for a proton-exchange membrane fuel cell (PEMFC) was prepared on a carbon black particle or a graphite particle coated with a nafion polymer via a reduction of platinum(II) bis(acetylacetonate) denoted as Pt(acac)2 as a Pt precursor in a drying process. Sublimed Pt(acac)2 adsorbed on the nafion-coated carbon materials was reduced to Pt nanoparticles in a glass reactor at 180 degrees C of N2 atmosphere. The morphology of Pt nanoparticles on carbon materials was observed by scanning electron microscopy (SEM) and the distribution of Pt nanoparticles was done by transmission electron microscopy (TEM). The particle size was estimated by analyzing the TEM image using an image analyzer. It was found that nano-sized Pt particles were deposited on the surface of carbon materials, and the number density and the average particle size increased with increasing reduction time.

Parylene C as a Sacrificial Material for Microfabrication

NASA Technical Reports Server (NTRS)

Beamesderfer, Michael

2005-01-01

Parylene C has been investigated for use as a sacrificial material in microfabrication. Although Parylene C cannot be patterned lithographically like photoresists, it nevertheless extends the range of processing options by offering a set of properties that are suitable for microfabrication and are complementary to those of photoresists. The compatibility of Parylene C with several microfabrication processes was demonstrated in experiments in which a thin film of Parylene C was deposited on a silicon wafer, then several thin metal films were deposited and successfully patterned, utilizing the Parylene C pads as a sacrificial layer. The term "parylene" -- a contraction of "poly(para-xylene)" -- denotes a family of vapor-deposited polymers. In Parylene C (the most common form of parylene), a chlorine atom is substituted for one of the hydrogen atoms on the benzene ring of each para-xylene moiety. Heretofore, parylenes have been used as conformal coating materials in diverse applications.

Characterization of lycopene hydrocolloidal structure induced by tomato processing.

PubMed

Jazaeri, Sahar; Mohammadi, Abdorreza; Kermani, Amir Mehrabi Panah; Paliyath, Gopinadhan; Kakuda, Yukio

2018-04-15

Tomato juice and paste are special type of dispersions, composed of suspended particles (pulp) dispersed in a colloidal liquid medium (serum). The bright red appearance of soluble solid separated by high speed centrifugation denoted the presence of lycopene in this fraction. Since lycopene is a hydrophobic compound it is not expected to appear in the water soluble fraction. HPLC analysis indicated presence of substantial amount of lycopene in soluble fraction which was confirmed by the appearance of lycopene crystals when observed under Transmission Electron Microscope (TEM). Considerable amount of pectin in the soluble fraction led to hypothesis that pectin facilitated the formation of hydrocolloidal system of suspended lycopene during processing. Enzyme treatment confirmed this hypothesis when pectinase effectively disrupted colloidal system and precipitated lycopene. Necessity of the divalent ions to retain the suspension signified the electrostatic interactions in the matrix surrounding lycopene crystals. Copyright © 2017 Elsevier Ltd. All rights reserved.

Social projection increases for positive targets: ascertaining the effect and exploring its antecedents.

PubMed

Machunsky, Maya; Toma, Claudia; Yzerbyt, Vincent; Corneille, Olivier

2014-10-01

Social projection denotes the attribution of characteristics of the self to others and, therefore, increases perceived self-other similarity. The present research tests the assumption that positive but not negative targets elicit social projection. Earlier research has attributed an effect of target valence to mere consistency principles of judgment and has, thus, questioned projection processes to be the origin of self-other similarity. Building on more recent evidence, we suggest that target valence influences self-other similarity above and beyond a consistent response behavior. The results of three experiments in which target valence was manipulated through evaluative conditioning and by smiling versus neutral facial expression support our hypothesis. We discuss how cognitive versus motivated processes can account for these findings and suggest a new conceptualization of social projection whereby projection is a means to regulate social distance. © 2014 by the Society for Personality and Social Psychology, Inc.

Corrigendum: direct adjustment for confounding by smoking reduces radiation-related cancer risk estimates of mortality among male nuclear workers in Japan, 1999-2010.

PubMed

Kudo, Shin'ichi; Ishida, Jun'ichi; Yoshimoto, Keiko; Mizuno, Shoichi; Ohshima, Sumio; Furuta, Hiroshige; Kasagi, Fumiyoshi

2018-05-30

We found some trivial errors which might confuse reader. The errors can be identified as the following two types. (1) The one is that misuse of "ERR" and "ERR/Sv". We denoted "Table 4 shows ERRs/Sv and 90% CIs ..." in line 7 of page 366. While we denoted "ERR and 90% CI for all cancers, excluding leukaemia, by dose category ..." in title of Table 4. The values described in Table 4 were ERR by dose category and not ERR/Sv. In addition, the explanation about the model that derived ERR by dose category is better to be added. Therefore, the description mentioned above should be changed as follows. (Misprinted) Table 4 shows ERRs/Sv and 90% CIs for all cancers excluding leukaemia by dose category. (Corrected) Table 4 shows ERRs which were defined as follow equation and 90% CIs for all cancers excluding leukaemia by dose category. λ=λ0 (a,c,y,r,s)exp(α1z1+α2z2+α3z3) (1+βi di) where di is the dose category, and βi is the ERR by dose category. The lowest dose category was set as reference. (2) The other were errors in surface caput of several tables. We described "ERR without adjustment for smoking" and "ERR with adjustment for smoking" in Table 4. These are correct description. However, "ERR with adjustment for smoking" was described as "For smoking" in Table 2. In addition, "Without adjustment" and "With adjustment" denoted in the surface caput of Table 5, 6, 7 should be denoted as "Without adjustment for smoking" and "With adjustment for smoking". The author wishes to apologies for the errors. . Creative Commons Attribution license.

A neuro-inspired spike-based PID motor controller for multi-motor robots with low cost FPGAs.

PubMed

Jimenez-Fernandez, Angel; Jimenez-Moreno, Gabriel; Linares-Barranco, Alejandro; Dominguez-Morales, Manuel J; Paz-Vicente, Rafael; Civit-Balcells, Anton

2012-01-01

In this paper we present a neuro-inspired spike-based close-loop controller written in VHDL and implemented for FPGAs. This controller has been focused on controlling a DC motor speed, but only using spikes for information representation, processing and DC motor driving. It could be applied to other motors with proper driver adaptation. This controller architecture represents one of the latest layers in a Spiking Neural Network (SNN), which implements a bridge between robotics actuators and spike-based processing layers and sensors. The presented control system fuses actuation and sensors information as spikes streams, processing these spikes in hard real-time, implementing a massively parallel information processing system, through specialized spike-based circuits. This spike-based close-loop controller has been implemented into an AER platform, designed in our labs, that allows direct control of DC motors: the AER-Robot. Experimental results evidence the viability of the implementation of spike-based controllers, and hardware synthesis denotes low hardware requirements that allow replicating this controller in a high number of parallel controllers working together to allow a real-time robot control.

A Neuro-Inspired Spike-Based PID Motor Controller for Multi-Motor Robots with Low Cost FPGAs

PubMed Central

Jimenez-Fernandez, Angel; Jimenez-Moreno, Gabriel; Linares-Barranco, Alejandro; Dominguez-Morales, Manuel J.; Paz-Vicente, Rafael; Civit-Balcells, Anton

2012-01-01

In this paper we present a neuro-inspired spike-based close-loop controller written in VHDL and implemented for FPGAs. This controller has been focused on controlling a DC motor speed, but only using spikes for information representation, processing and DC motor driving. It could be applied to other motors with proper driver adaptation. This controller architecture represents one of the latest layers in a Spiking Neural Network (SNN), which implements a bridge between robotics actuators and spike-based processing layers and sensors. The presented control system fuses actuation and sensors information as spikes streams, processing these spikes in hard real-time, implementing a massively parallel information processing system, through specialized spike-based circuits. This spike-based close-loop controller has been implemented into an AER platform, designed in our labs, that allows direct control of DC motors: the AER-Robot. Experimental results evidence the viability of the implementation of spike-based controllers, and hardware synthesis denotes low hardware requirements that allow replicating this controller in a high number of parallel controllers working together to allow a real-time robot control. PMID:22666004

An evaluation of the effect of JPEG, JPEG2000, and H.264/AVC on CQR codes decoding process

NASA Astrophysics Data System (ADS)

Vizcarra Melgar, Max E.; Farias, Mylène C. Q.; Zaghetto, Alexandre

2015-02-01

This paper presents a binarymatrix code based on QR Code (Quick Response Code), denoted as CQR Code (Colored Quick Response Code), and evaluates the effect of JPEG, JPEG2000 and H.264/AVC compression on the decoding process. The proposed CQR Code has three additional colors (red, green and blue), what enables twice as much storage capacity when compared to the traditional black and white QR Code. Using the Reed-Solomon error-correcting code, the CQR Code model has a theoretical correction capability of 38.41%. The goal of this paper is to evaluate the effect that degradations inserted by common image compression algorithms have on the decoding process. Results show that a successful decoding process can be achieved for compression rates up to 0.3877 bits/pixel, 0.1093 bits/pixel and 0.3808 bits/pixel for JPEG, JPEG2000 and H.264/AVC formats, respectively. The algorithm that presents the best performance is the H.264/AVC, followed by the JPEG2000, and JPEG.

Child Mortality Estimation: Accelerated Progress in Reducing Global Child Mortality, 1990–2010

PubMed Central

Hill, Kenneth; You, Danzhen; Inoue, Mie; Oestergaard, Mikkel Z.; Hill, Kenneth; Alkema, Leontine; Cousens, Simon; Croft, Trevor; Guillot, Michel; Pedersen, Jon; Walker, Neff; Wilmoth, John; Jones, Gareth

2012-01-01

Monitoring development indicators has become a central interest of international agencies and countries for tracking progress towards the Millennium Development Goals. In this review, which also provides an introduction to a collection of articles, we describe the methodology used by the United Nations Inter-agency Group for Child Mortality Estimation to track country-specific changes in the key indicator for Millennium Development Goal 4 (MDG 4), the decline of the under-five mortality rate (the probability of dying between birth and age five, also denoted in the literature as U5MR and 5 q 0). We review how relevant data from civil registration, sample registration, population censuses, and household surveys are compiled and assessed for United Nations member states, and how time series regression models are fitted to all points of acceptable quality to establish the trends in U5MR from which infant and neonatal mortality rates are generally derived. The application of this methodology indicates that, between 1990 and 2010, the global U5MR fell from 88 to 57 deaths per 1,000 live births, and the annual number of under-five deaths fell from 12.0 to 7.6 million. Although the annual rate of reduction in the U5MR accelerated from 1.9% for the period 1990–2000 to 2.5% for the period 2000–2010, it remains well below the 4.4% annual rate of reduction required to achieve the MDG 4 goal of a two-thirds reduction in U5MR from its 1990 value by 2015. Thus, despite progress in reducing child mortality worldwide, and an encouraging increase in the pace of decline over the last two decades, MDG 4 will not be met without greatly increasing efforts to reduce child deaths. PMID:22952441

Design of experiments enhanced statistical process control for wind tunnel check standard testing

NASA Astrophysics Data System (ADS)

Phillips, Ben D.

The current wind tunnel check standard testing program at NASA Langley Research Center is focused on increasing data quality, uncertainty quantification and overall control and improvement of wind tunnel measurement processes. The statistical process control (SPC) methodology employed in the check standard testing program allows for the tracking of variations in measurements over time as well as an overall assessment of facility health. While the SPC approach can and does provide researchers with valuable information, it has certain limitations in the areas of process improvement and uncertainty quantification. It is thought by utilizing design of experiments methodology in conjunction with the current SPC practices that one can efficiently and more robustly characterize uncertainties and develop enhanced process improvement procedures. In this research, methodologies were developed to generate regression models for wind tunnel calibration coefficients, balance force coefficients and wind tunnel flow angularities. The coefficients of these regression models were then tracked in statistical process control charts, giving a higher level of understanding of the processes. The methodology outlined is sufficiently generic such that this research can be applicable to any wind tunnel check standard testing program.

A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques

NASA Astrophysics Data System (ADS)

Schmidt, S.; Heyns, P. S.; de Villiers, J. P.

2018-02-01

In this paper, a fault diagnostic methodology is developed which is able to detect, locate and trend gear faults under fluctuating operating conditions when only vibration data from a single transducer, measured on a healthy gearbox are available. A two-phase feature extraction and modelling process is proposed to infer the operating condition and based on the operating condition, to detect changes in the machine condition. Information from optimised machine and operating condition hidden Markov models are statistically combined to generate a discrepancy signal which is post-processed to infer the condition of the gearbox. The discrepancy signal is processed and combined with statistical methods for automatic fault detection and localisation and to perform fault trending over time. The proposed methodology is validated on experimental data and a tacholess order tracking methodology is used to enhance the cost-effectiveness of the diagnostic methodology.

When is good, good enough? Methodological pragmatism for sustainable guideline development.

PubMed

Browman, George P; Somerfield, Mark R; Lyman, Gary H; Brouwers, Melissa C

2015-03-06

Continuous escalation in methodological and procedural rigor for evidence-based processes in guideline development is associated with increasing costs and production delays that threaten sustainability. While health research methodologists are appropriately responsible for promoting increasing rigor in guideline development, guideline sponsors are responsible for funding such processes. This paper acknowledges that other stakeholders in addition to methodologists should be more involved in negotiating trade-offs between methodological procedures and efficiency in guideline production to produce guidelines that are 'good enough' to be trustworthy and affordable under specific circumstances. The argument for reasonable methodological compromise to meet practical circumstances is consistent with current implicit methodological practice. This paper proposes a conceptual tool as a framework to be used by different stakeholders in negotiating, and explicitly reporting, reasonable compromises for trustworthy as well as cost-worthy guidelines. The framework helps fill a transparency gap in how methodological choices in guideline development are made. The principle, 'when good is good enough' can serve as a basis for this approach. The conceptual tool 'Efficiency-Validity Methodological Continuum' acknowledges trade-offs between validity and efficiency in evidence-based guideline development and allows for negotiation, guided by methodologists, of reasonable methodological compromises among stakeholders. Collaboration among guideline stakeholders in the development process is necessary if evidence-based guideline development is to be sustainable.

Toward High-Performance and Low-Cost Hydrogen Evolution Reaction Electrocatalysts: Nanostructuring Cobalt Phosphide (CoP) Particles on Carbon Fiber Paper.

PubMed

Yu, Shu Hearn; Chua, Daniel H C

2018-05-02

In this communication, we facily fabricated nanostructured CoP particles (150 to 200 nm) on carbon fiber paper (CFP) for hydrogen evolution reaction (HER) by a simple two-step process via a green route. In the first step, crystalline Co 3 O 4 nanocubes (150-200 nm) were loaded on CFP through a hydrothermal process at low temperature (120 °C). Interestingly, crystalline Co 3 O 4 nanocubes with a size 150-200 nm exhibited different growth mechanisms in contrast to the crystalline Co 3 O 4 nanocubes with a size <100 nm reported earlier. In the second step, these crystalline Co 3 O 4 nanocubes were converted to catalytically active CoP particles through chemical vapor deposition (CVD) phosphorization (denoted as CoP/CFP-H). Remarkably, CoP/CFP-H exhibited a low Tafel slope of 49.7 mV/dec and only required overpotentials of 128.1, 144.4, and 190.8 mV to drive geometric current densities of -10, -20, and -100 mA cm -2 , respectively. Besides, the CoP/CFP-H also demonstrated an excellent durability in an acidic environment under 2000 sweeps at a high scan rate (100 mV s -1 ) and a 24 h chronopotentiometry testing. For comparison, CoP was also fabricated through the electrodeposition method, followed by CVD phosphorization (denoted as CoP/CFP-E). It was found that the latter had exhibited inferior activity compared to CoP/CFP-H. The good performances of CoP/CFP-H are essentially due to the rational designs of electrode: (i) the applications of highly HER active CoP electrocatalyst, (ii) the intimate contact of nanostructured CoP on carbon fibers, and (iii) the large electrochemical surface area at electrocatalyst/electrolyte interface due to the large retaining of particles features after phosphorization. Notably, the intermediate Co 3 O 4 /CFP can serve as a platform to develop other cobalt-based functional materials.

Reengineering the Acquisition/Procurement Process: A Methodology for Requirements Collection

NASA Technical Reports Server (NTRS)

Taylor, Randall; Vanek, Thomas

2011-01-01

This paper captures the systematic approach taken by JPL's Acquisition Reengineering Project team, the methodology used, challenges faced, and lessons learned. It provides pragmatic "how-to" techniques and tools for collecting requirements and for identifying areas of improvement in an acquisition/procurement process or other core process of interest.

Speciated mercury at marine, coastal, and inland sites in New England - Part 2: Relationships with atmospheric physical parameters

NASA Astrophysics Data System (ADS)

Mao, H.; Talbot, R.; Hegarty, J.; Koermer, J.

2011-10-01

Long-term continuous measurements of gaseous elemental mercury (Hgo), reactive gaseous mercury (RGM), and particulate phase mercury (Hgp) were conducted at coastal (Thompson Farm, denoted as TF), marine (Appledore Island, denoted as AI), and elevated inland (Pac Monadnock, denoted as PM) monitoring sites of the AIRMAP Observing Network. Diurnal, seasonal, annual, and interannual variability in Hgo, RGM, and Hgp from the three distinctly different environments were characterized and compared in Part 1. Here in Part 2 relationships between speciated mercury (i.e., Hgo, RGM, and Hgp) and climate variables (e.g., temperature, wind speed, humidity, solar radiation, and precipitation) were examined. The best point-to-point correlations were found between Hgo and temperature in summer at TF and spring at PM, but there was no similar correlation at AI. Subsets of data demonstrated regional impacts of episodic dynamic processes such as strong cyclonic systems on ambient levels of Hgo at all three sites, possibly through enhanced oceanic evasion of Hgo. A tendency of higher levels of RGM and Hgp was identified in spring and summer under sunny conditions in all environments. Specifically, the 10th, 25th, median, 75th, and 90th percentile mixing ratios of RGM and Hgp increased with stronger solar radiation at both the coastal and marine sites. These metrics decreased with increasing wind speed at AI indicating enhanced loss of RGM and Hgp through deposition. RGM and Hgp levels correlated with temperature positively in spring, summer and fall at the coastal and marine locations. In the coastal region relationships between RGM and relative humidity suggested a clear decreasing tendency in all metrics from <40% to 100% relative humidity in all seasons especially in spring, compared to less variability in the marine environment. The effect of precipitation on RGM at coastal and marine locations was similar. At the coastal site, RGM levels were a factor of 3-4 higher under dry conditions than rainy conditions in all seasons. In winter RGM mixing ratios appeared to be mostly above the limit of detection (LOD) during snowfalls suggesting less scavenging efficiency of snow. Mixing ratios of Hgp at the coastal and marine sites remained above the LOD under rainy conditions. Precipitation had negligible impact on the magnitude and pattern of diurnal variation of Hgp in all seasons in the marine environment.

Scanning Terahertz Heterodyne Imaging Systems

NASA Technical Reports Server (NTRS)

Siegel, Peter; Dengler, Robert

2007-01-01

Scanning terahertz heterodyne imaging systems are now at an early stage of development. In a basic scanning terahertz heterodyne imaging system, (see Figure 1) two far-infrared lasers generate beams denoted the local-oscillator (LO) and signal that differ in frequency by an amount, denoted the intermediate frequency (IF), chosen to suit the application. The LO beam is sent directly to a mixer as one of two inputs. The signal beam is focused to a spot on or in the specimen. After transmission through or reflection from the specimen, the beams are focused to a spot on a terahertz mixer, which extracts the IF outputs. The specimen is mounted on a translation stage, by means of which the focal spot is scanned across the specimen to build up an image.

On the dynamics of composition of entire functions

NASA Astrophysics Data System (ADS)

Singh, Anand Prakash

2003-01-01

Let f be an entire function. For n in {bb N}, let f(n) denote the nth iterate of f. The set [ F(f)=\\{z:(f^n) is normal in some neighbourhood of z\\} ] is the Fatou set or the set of normality and its complement J(f) is the Julia set. If U is a component of F(f), then f(U) lies in some component V of F(f). If U_ncap U_m=phi for n ≠ m where U_n denotes the component of F(f) which contains f(n(U)) , then U is called a wandering domain, else U is called a pre-periodic domain, and if U_n = U for some n in {bb N} then U is called periodic domain.

Querying databases of trajectories of differential equations 2: Index functions

NASA Technical Reports Server (NTRS)

Grossman, Robert

1991-01-01

Suppose that a large number of parameterized trajectories (gamma) of a dynamical system evolving in R sup N are stored in a database. Let eta is contained R sup N denote a parameterized path in Euclidean space, and let parallel to center dot parallel to denote a norm on the space of paths. A data structures and indices for trajectories are defined and algorithms are given to answer queries of the following forms: Query 1. Given a path eta, determine whether eta occurs as a subtrajectory of any trajectory gamma from the database. If so, return the trajectory; otherwise, return null. Query 2. Given a path eta, return the trajectory gamma from the database which minimizes the norm parallel to eta - gamma parallel.

EJ IWG Promising Practices for EJ Methodologies in NEPA Reviews

EPA Pesticide Factsheets

Report of methodologies gleaned from current agency practices identified by the NEPA Committee. These methodologies are concerning the interface of environmental justice considerations through NEPA processes.

The Statistical point of view of Quality: the Lean Six Sigma methodology

PubMed Central

Viti, Andrea; Terzi, Alberto

2015-01-01

Six Sigma and Lean are two quality improvement methodologies. The Lean Six Sigma methodology is applicable to repetitive procedures. Therefore, the use of this methodology in the health-care arena has focused mainly on areas of business operations, throughput, and case management and has focused on efficiency outcomes. After the revision of methodology, the paper presents a brief clinical example of the use of Lean Six Sigma as a quality improvement method in the reduction of the complications during and after lobectomies. Using Lean Six Sigma methodology, the multidisciplinary teams could identify multiple modifiable points across the surgical process. These process improvements could be applied to different surgical specialties and could result in a measurement, from statistical point of view, of the surgical quality. PMID:25973253

The Statistical point of view of Quality: the Lean Six Sigma methodology.

PubMed

Bertolaccini, Luca; Viti, Andrea; Terzi, Alberto

2015-04-01

Six Sigma and Lean are two quality improvement methodologies. The Lean Six Sigma methodology is applicable to repetitive procedures. Therefore, the use of this methodology in the health-care arena has focused mainly on areas of business operations, throughput, and case management and has focused on efficiency outcomes. After the revision of methodology, the paper presents a brief clinical example of the use of Lean Six Sigma as a quality improvement method in the reduction of the complications during and after lobectomies. Using Lean Six Sigma methodology, the multidisciplinary teams could identify multiple modifiable points across the surgical process. These process improvements could be applied to different surgical specialties and could result in a measurement, from statistical point of view, of the surgical quality.

Effect of pores formation process and oxygen plasma treatment to hydroxyapatite formation on bioactive PEEK prepared by incorporation of precursor of apatite.

PubMed

Yabutsuka, Takeshi; Fukushima, Keito; Hiruta, Tomoko; Takai, Shigeomi; Yao, Takeshi

2017-12-01

When bioinert substrates with fine-sized pores are immersed in a simulated body fluid (SBF) and the pH value or the temperature is increased, fine particles of calcium phosphate, which the authors denoted as 'precursor of apatite' (PrA), are formed in the pores. By this method, hydroxyapatite formation ability can be provided to various kinds of bioinert materials. In this study, the authors studied fabrication methods of bioactive PEEK by using the above-mentioned process. First, the fine-sized pores were formed on the surface of the PEEK substrate by H 2 SO 4 treatment. Next, to provide hydrophilic property to the PEEK, the surfaces of the PEEK were treated with O 2 plasma. Finally, PrA were formed in the pores by the above-mentioned process, which is denoted as 'Alkaline SBF' treatment, and the bioactive PEEK was obtained. By immersing in SBF with the physiological condition, hydroxyapatite formation was induced on the whole surface of the substrate within 1day. The formation of PrA directly contributed to hydroxyapatite formation ability. By applying the O 2 plasma treatment, hydroxyapatite formation was uniformly performed on the whole surface of the substrate. The H 2 SO 4 treatment contributed to a considerable enhancement of adhesive strength of the formed hydroxyapatite layer formed in SBF because of the increase of surface areas of the substrate. As a comparative study, the sandblasting method was applied as the pores formation process instead of the H 2 SO 4 treatment. Although hydroxyapatite formation was provided also in this case, however, the adhesion of the formed hydroxyapatite layer to the substrate was not sufficient even if the O 2 plasma treatment was conducted. This result indicates that the fine-sized pores should be formed on the whole surface of the substrate uniformly to achieve high adhesive strength of the hydroxyapatite layer. Therefore, it is considered that the H 2 SO 4 treatment before the O 2 plasma and the 'Alkaline SBF' treatment is an important factor to achieve high adhesive strength of hydroxyapatite layer to the PEEK substrate. This material is expected to be a candidate for next-generation implant materials with high bioactivity. Copyright © 2017 Elsevier B.V. All rights reserved.

A case study of three Puerto Rico-Statewide Systemic Initiative intermediate science teachers' views on and use of performance assessment

NASA Astrophysics Data System (ADS)

Pico, Rene Antonio, II

The purpose of this study was to investigate how teachers perceived and used performance assessment in the science classroom. Ms. Sanchez, Mrs. Irizarry, and Mrs. Bonnin, seventh grade teachers, participated in the study. Five research questions regarding the use of performance assessment were generated from these areas of inquiry: (a) teachers' views, (b) teachers' concerns, (c) teachers' level of use, (d) teachers' perceived facilitators, and (e) teachers' perceived barriers. Qualitative research methodologies were employed to collect and analyze the data. These included the use of informal interviews, a demographic survey, the Stage of Concern Questionnaire (Hall, George and Rutherford, 1979), the Level of Use Interview protocol (Loucks et al., 1975) and the study of artifacts. Performance assessment was defined by the three teachers as a dynamic process requiring the use of manipulatives in which students are involved as working participants in their own learning. Mrs. Irizarry and Mrs. Bonnin, described performance assessment with a broader range of possible executions, implying the use of tasks that allowed teachers to observe student behavior ranging from simple written responses to work collected over time. Ms. Sanchez defined assessment mainly on the basis of the use of equipment, instruments and materials in science. Ms. Sanchez reflected low intensity in the Levels of Concerns (Hall, George and Rutherford, 1979), suggesting that she felt at ease when working with performance assessment. Mrs. Irizarry and Mrs. Bonnin reflected definite commitment with the innovation. A major similarity was found in the areas of Refocusing (SoC 6), and Collaboration (SoC 5) denoting an interest in exploring and trying new alternatives. Ms. Sanchez and Mrs. Bonnin demonstrated characteristics of a well established routine or pattern in the Level of Use (Loucks et al., 1975) of performance assessment, while Mrs. Irizarry explored alternatives further and established a stronger process of modification. Two major facilitators to the use of performance assessment were perceived: (a) the provision of equipment and materials by the project; and (b) the support of colleagues. Two major barriers were perceived: (a) the time required to implement the tasks; and (b) the students' lack of knowledge and experience executing tasks.

A 60-year reconstructed high-resolution local meteorological data set in Central Sahel (1950-2009): evaluation, analysis and application to land surface modelling

NASA Astrophysics Data System (ADS)

Leauthaud, Crystele; Cappelaere, Bernard; Demarty, Jérôme; Guichard, Françoise; Velluet, Cécile; Kergoat, Laurent; Vischel, Théo; Grippa, Manuela; Mouhaimouni, Mohammed; Bouzou Moussa, Ibrahim; Mainassara, Ibrahim; Sultan, Benjamin

2017-04-01

The Sahel has experienced strong climate variability in the past decades. Understanding its implications for natural and cultivated ecosystems is pivotal in a context of high population growth and mainly agriculture-based livelihoods. However, efforts to model processes at the land-atmosphere interface are hindered, particularly when the multi-decadal timescale is targeted, as climatic data are scarce, largely incomplete and often unreliable. This study presents the generation of a long-term, high-temporal resolution, multivariate local climatic data set for Niamey, Central Sahel. The continuous series spans the period 1950-2009 at a 30-min timescale and includes ground station-based meteorological variables (precipitation, air temperature, relative and specific humidity, air pressure, wind speed, downwelling long- and short-wave radiation) as well as process-modelled surface fluxes (upwelling long- and short-wave radiation,latent, sensible and soil heat fluxes and surface temperature). A combination of complementary techniques (linear/spline regressions, a multivariate analogue method, artificial neural networks and recursive gap filling) was used to reconstruct missing meteorological data. The complete surface energy budget was then obtained for two dominant land cover types, fallow bush and millet, by applying the meteorological forcing data set to a finely field-calibrated land surface model. Uncertainty in reconstructed data was expressed by means of a stochastic ensemble of plausible historical time series. Climatological statistics were computed at sub-daily to decadal timescales and compared with local, regional and global data sets such as CRU and ERA-Interim. The reconstructed precipitation statistics, ˜1°C increase in mean annual temperature from 1950 to 2009, and mean diurnal and annual cycles for all variables were in good agreement with previous studies. The new data set, denoted NAD (Niamey Airport-derived set) and publicly available, can be used to investigate the water and energy cycles in Central Sahel, while the methodology can be applied to reconstruct series at other stations. The study has been published in Int. J. Climatol. (2016), DOI: 10.1002/joc.4874

Vascular Access Procedures

MedlinePlus

... have a personal story about radiology? Share your patient story here Pediatric Content Some imaging tests and treatments have special pediatric considerations. The teddy bear denotes child-specific content. Related ...

[Qualitative research methodology in health care].

PubMed

Bedregal, Paula; Besoain, Carolina; Reinoso, Alejandro; Zubarew, Tamara

2017-03-01

Health care research requires different methodological approaches such as qualitative and quantitative analyzes to understand the phenomena under study. Qualitative research is usually the least considered. Central elements of the qualitative method are that the object of study is constituted by perceptions, emotions and beliefs, non-random sampling by purpose, circular process of knowledge construction, and methodological rigor throughout the research process, from quality design to the consistency of results. The objective of this work is to contribute to the methodological knowledge about qualitative research in health services, based on the implementation of the study, “The transition process from pediatric to adult services: perspectives from adolescents with chronic diseases, caregivers and health professionals”. The information gathered through the qualitative methodology facilitated the understanding of critical points, barriers and facilitators of the transition process of adolescents with chronic diseases, considering the perspective of users and the health team. This study allowed the design of a transition services model from pediatric to adult health services based on the needs of adolescents with chronic diseases, their caregivers and the health team.

DESIGNING PROCESSES FOR ENVIRONMENTAL PROBLEMS

EPA Science Inventory

Designing for the environment requires consideration of environmental impacts. The Generalized WAR Algorithm is the methodology that allows the user to evaluate the potential environmental impact of the design of a chemical process. In this methodology, chemicals are assigned val...

Automated Methodologies for the Design of Flow Diagrams for Development and Maintenance Activities

NASA Astrophysics Data System (ADS)

Shivanand M., Handigund; Shweta, Bhat

The Software Requirements Specification (SRS) of the organization is a text document prepared by strategic management incorporating the requirements of the organization. These requirements of ongoing business/ project development process involve the software tools, the hardware devices, the manual procedures, the application programs and the communication commands. These components are appropriately ordered for achieving the mission of the concerned process both in the project development and the ongoing business processes, in different flow diagrams viz. activity chart, workflow diagram, activity diagram, component diagram and deployment diagram. This paper proposes two generic, automatic methodologies for the design of various flow diagrams of (i) project development activities, (ii) ongoing business process. The methodologies also resolve the ensuing deadlocks in the flow diagrams and determine the critical paths for the activity chart. Though both methodologies are independent, each complements other in authenticating its correctness and completeness.

The chemical interpretation and practice of linear solvation energy relationships in chromatography.

PubMed

Vitha, Mark; Carr, Peter W

2006-09-08

This review focuses on the use of linear solvation energy relationships (LSERs) to understand the types and relative strength of the chemical interactions that control retention and selectivity in the various modes of chromatography ranging from gas chromatography to reversed phase and micellar electrokinetic capillary chromatography. The most recent, widely accepted symbolic representation of the LSER model, as proposed by Abraham, is given by the equation: SP=c + eE + sS + aA + bB + vV, in which, SP can be any free energy related property. In chromatography, SP is most often taken as logk' where k' is the retention factor. The letters E, S, A, B, and V denote solute dependent input parameters that come from scales related to a solute's polarizability, dipolarity (with some contribution from polarizability), hydrogen bond donating ability, hydrogen bond accepting ability, and molecular size, respectively. The e-, s-, a-, b-, and v-coefficients and the constant, c, are determined via multiparameter linear least squares regression analysis of a data set comprised of solutes with known E, S, A, B, and V values and which span a reasonably wide range in interaction abilities. Thus, LSERs are designed to probe the type and relative importance of the interactions that govern solute retention. In this review, we include a synopsis of the various solvent and solute scales in common use in chromatography. More importantly, we emphasize the development and physico-chemical basis of - and thus meaning of - the solute parameters. After establishing the meaning of the parameters, we discuss their use in LSERs as applied to understanding the intermolecular interactions governing various gas-liquid and liquid-liquid phase equilibria. The gas-liquid partition process is modeled as the sum of an endoergic cavity formation/solvent reorganization process and exoergic solute-solvent attractive forces, whereas the partitioning of a solute between two solvents is thermodynamically equivalent to the difference in two gas/liquid solution processes. We end with a set of recommendations and advisories for conducting LSER studies, stressing the proper chemical and statistical application of the methodology. We intend that these recommendations serve as a guide for future studies involving the execution, statistical evaluation, and chemical interpretation of LSERs.

Novel density functional methodology for the computation of accurate electronic and thermodynamic properties of molecular systems and improved long-range behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kafafi, S.A.

1998-12-10

A novel general purpose density functional methodology for the computation of accurate electronic and thermodynamic properties of molecules and improved long-range behavior is reported. Assuming the separability of the exchange (E{sub x}) and correlation (E{sub c}) contributions to the total exchange-correlation energy functional (E{sub xc}), the E{sub x} term consists of a hybrid mixture of 37.5% Hartree-Fock exchange and the appropriate local spin density exchange using the adiabatic connection formula. He demonstrated that E{sub x} and its corresponding potential V{sub x} [=dE{sub x}/d{rho}(r)] have the proper asymptotic limits at r = 0 and r {r_arrow} {infinity}, E{sub c} consists ofmore » the Vosko, Wilk, and Nusair formula for the free-electron gas correlation energy and a generalized gradient approximation term with one adjustable parameter. V{sub c} [=dE{sub c}/d{rho}(r)] was shown to obey the r {r_arrow} {infinity} limit of the corresponding potential derived from exact atomic exchange-correlation computations; namely, V{sub c} is proportional to r{sup {minus}4}. Most importantly, he demonstrated that, at r values where dispersion forces are operating, V{sub c} is proportional to 1/r{sup n} (n = 4, 6, 8, {hor_ellipsis}). The reported method was denoted by K2-BVWN because it used two adjustable parameters in its formulation. The K2-BVWN scheme scales as N{sup 3}, where N is the number of basis functions, compared to {approximately}N{sup 7} for Gaussian-2 (G2) ab initio theory and related methods, {approximately}N{sup 5} for Barone`s mPW1,3PW, and {approximately}N{sup 4} for Becke`s three-parameter density functional approaches. The G2 data set complemented by the reported molecular systems investigated in this work was recommended as a critical test for evaluating novel ab initio and density functional methodologies. The K2-BVWN method has been implemented in the Gaussian series of programs.« less

A Data Preparation Methodology in Data Mining Applied to Mortality Population Databases.

PubMed

Pérez, Joaquín; Iturbide, Emmanuel; Olivares, Víctor; Hidalgo, Miguel; Martínez, Alicia; Almanza, Nelva

2015-11-01

It is known that the data preparation phase is the most time consuming in the data mining process, using up to 50% or up to 70% of the total project time. Currently, data mining methodologies are of general purpose and one of their limitations is that they do not provide a guide about what particular task to develop in a specific domain. This paper shows a new data preparation methodology oriented to the epidemiological domain in which we have identified two sets of tasks: General Data Preparation and Specific Data Preparation. For both sets, the Cross-Industry Standard Process for Data Mining (CRISP-DM) is adopted as a guideline. The main contribution of our methodology is fourteen specialized tasks concerning such domain. To validate the proposed methodology, we developed a data mining system and the entire process was applied to real mortality databases. The results were encouraging because it was observed that the use of the methodology reduced some of the time consuming tasks and the data mining system showed findings of unknown and potentially useful patterns for the public health services in Mexico.

Performance in physiology evaluation: possible improvement by active learning strategies.

PubMed

Montrezor, Luís H

2016-12-01

The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages interaction with their peers, and stimulates thinking about physiological mechanisms. This study examined the performance of medical students on physiology over four semesters with and without active engagement methodologies. Four activities were used: a puzzle, a board game, a debate, and a video. The results show that engaging in activities with active methodologies before a physiology cognitive monitoring test significantly improved student performance compared with not performing the activities. We integrate the use of these methodologies with classic lectures, and this integration appears to improve the teaching/learning process in the discipline of physiology and improves the integration of physiology with cardiology and neurology. In addition, students enjoy the activities and perform better on their evaluations when they use them. Copyright © 2016 The American Physiological Society.

49 CFR 38.4 - Miscellaneous instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... are subject to conventional engineering tolerances for material properties and field conditions... that applies only when the conditions described are present. (3) May denotes an option or alternative...

Magnetic Resonance (MR) Defecography

MedlinePlus

... have a personal story about radiology? Share your patient story here Pediatric Content Some imaging tests and treatments have special pediatric considerations. The teddy bear denotes child-specific content. Related ...

Modeling Business Processes in Public Administration

NASA Astrophysics Data System (ADS)

Repa, Vaclav

During more than 10 years of its existence business process modeling became a regular part of organization management practice. It is mostly regarded. as a part of information system development or even as a way to implement some supporting technology (for instance workflow system). Although I do not agree with such reduction of the real meaning of a business process, it is necessary to admit that information technologies play an essential role in business processes (see [1] for more information), Consequently, an information system is inseparable from a business process itself because it is a cornerstone of the general basic infrastructure of a business. This fact impacts on all dimensions of business process management. One of these dimensions is the methodology that postulates that the information systems development provide the business process management with exact methods and tools for modeling business processes. Also the methodology underlying the approach presented in this paper has its roots in the information systems development methodology.

Additive Manufacturing of Functional Elements on Sheet Metal

NASA Astrophysics Data System (ADS)

Schaub, Adam; Ahuja, Bhrigu; Butzhammer, Lorenz; Osterziel, Johannes; Schmidt, Michael; Merklein, Marion

Laser Beam Melting (LBM) process with its advantages of high design flexibility and free form manufacturing methodology is often applied limitedly due to its low productivity and unsuitability for mass production compared to conventional manufacturing processes. In order to overcome these limitations, a hybrid manufacturing methodology is developed combining the additive manufacturing process of laser beam melting with sheet forming processes. With an interest towards aerospace and medical industry, the material in focus is Ti-6Al-4V. Although Ti-6Al-4V is a commercially established material and its application for LBM process has been extensively investigated, the combination of LBM of Ti-6Al-4V with sheet metal still needs to be researched. Process dynamics such as high temperature gradients and thermally induced stresses lead to complex stress states at the interaction zone between the sheet and LBM structure. Within the presented paper mechanical characterization of hybrid parts will be performed by shear testing. The association of shear strength with process parameters is further investigated by analyzing the internal structure of the hybrid geometry at varying energy inputs during the LBM process. In order to compare the hybrid manufacturing methodology with conventional fabrication, the conventional methodologies subtractive machining and state of the art Laser Beam Melting is evaluated within this work. These processes will be analyzed for their mechanical characteristics and productivity by determining the build time and raw material consumption for each case. The paper is concluded by presenting the characteristics of the hybrid manufacturing methodology compared to alternative manufacturing technologies.

Topological ferrimagnetic behaviours of coordination polymers containing manganese(II) chains with mixed azide and carboxylate bridges and alternating F/AF/AF'/AF'/AF interactions.

PubMed

Wang, Yan-Qin; Liu, Hou-Ting; Qi, Yan; Gao, En-Qing

2014-08-21

Two Mn(ii) complexes with azide and a new zwitterionic tetracarboxylate ligand 1,2,4,5-tetrakis(4-carboxylatopyridinium-1-methylene)benzene (L(1)), {[Mn5(L(1))2(N3)8(OH)2]·12H2O}n () and {[Mn5(L(1))2(N3)8(H2O)2](ClO4)2·6H2O}n (), have been synthesized and characterized crystallographically and magnetically. and contain similar alternating chains constructed by azide and carboxylate bridges. The independent sets of bridges alternate in an ABCCB sequence between adjacent Mn(ii) ions: (EO-N3)2 double bridges (EO = end-on) (denoted as A), [(EO-N3)(OCO)2] triple bridges (denoted as B) and [(EO-N3)(OCO)] double bridges (denoted as C). The alternating chains are interlinked into 2D coordination networks by the tetrapyridinium spacers. Magnetic studies demonstrate that the magnetic coupling through the double EO azide bridges is ferromagnetic and that through mixed azide/carboxylate bridges is antiferromagnetic. The unprecedented F/AF/AF'/AF'/AF coupling sequence along the chain dictates an uncompensated ground spin state (S = 5/2 per Mn5 unit) and leads to one-dimensional topological ferrimagnetism, which features a minimum in the χT versus T plot.

Will farmers intend to cultivate Provitamin A genetically modified (GM) cassava in Nigeria? Evidence from a k-means segmentation analysis of beliefs and attitudes.

PubMed

Oparinde, Adewale; Abdoulaye, Tahirou; Mignouna, Djana Babatima; Bamire, Adebayo Simeon

2017-01-01

Analysis of market segments within a population remains critical to agricultural systems and policy processes for targeting new innovations. Patterns in attitudes and intentions toward cultivating Provitamin A GM cassava are examined through the use of a combination of behavioural theory and k-means cluster analysis method, investigating the interrelationship among various behavioural antecedents. Using a state-level sample of smallholder cassava farmers in Nigeria, this paper identifies three distinct classes of attitude and intention denoted as low opposition, medium opposition and high opposition farmers. It was estimated that only 25% of the surveyed population of farmers was highly opposed to cultivating Provitamin A GM cassava.

Sentiment analysis in twitter data using data analytic techniques for predictive modelling

NASA Astrophysics Data System (ADS)

Razia Sulthana, A.; Jaithunbi, A. K.; Sai Ramesh, L.

2018-04-01

Sentiment analysis refers to the task of natural language processing to determine whether a piece of text contains subjective information and the kind of subjective information it expresses. The subjective information represents the attitude behind the text: positive, negative or neutral. Understanding the opinions behind user-generated content automatically is of great concern. We have made data analysis with huge amount of tweets taken as big data and thereby classifying the polarity of words, sentences or entire documents. We use linear regression for modelling the relationship between a scalar dependent variable Y and one or more explanatory variables (or independent variables) denoted X. We conduct a series of experiments to test the performance of the system.

An ultrashort mixing length micromixer: the shear superposition micromixer.

PubMed

Bottausci, Frédéric; Cardonne, Caroline; Meinhart, Carl; Mezić, Igor

2007-03-01

We report for the first time a laminar high-performance continuous micromixing process of two fluids over a length of 200 microns in under 10 milliseconds achieved by an optimization of the control parameters amplitude and frequency in the mixing device denoted as 'Shear Superposition Micromixer'. We improve mixing time by approximately 5 orders of magnitude over diffusion-limited mixing. The data indicate that rapid mixing is a result of the combined action of Taylor-Aris dispersion in the main and secondary microchannels and unsteady vortex motion that occurs at finite Reynolds number, which occurs above a threshold amplitude and frequency. The mixing performance is quantified using micron-resolution particle image velocimetry (micro-PIV) and computational fluid dynamics (CFD) simulations.

Status and Assessments of CSR GRACE Level-2 Data Products

NASA Astrophysics Data System (ADS)

Bettadpur, Srinivas; Kang, Zhigui; Nagel, Peter; Pastor, Rick; Poole, Steve; Ries, John; Save, Himanshu

2015-04-01

The joint NASA/DLR GRACE mission has successfully operated for more than 13 years, and has provided a remarkable record of global mass flux due to a large variety of geophysical and climate processes at various spatio-temporal scales. The University of Texas Center for Space Research (CSR) hosts the mission PI, and is responsible for delivery of operational (presently denoted as Release-05 or RL05) gravity field data products. In addition, CSR generates and distributes a variety of other gravity field data products, including products generated from the use of satellite laser ranging data. This poster will provide an overview of all these data products, their relative quality, potential applications, and future plans for their development and delivery.

Nitrogen-doped mesoporous carbon-armored cobalt nanoparticles as efficient hydrogen evolving electrocatalysts.

PubMed

Tang, Duihai; Li, Kuo; Zhang, Wenting; Qiao, Zhen-An; Zhu, Junjiang; Zhao, Zhen

2018-03-15

A series of Co nanoparticles embedded, N-doped mesoporous carbons have been synthesized through chelate-assisted co-assembly strategy followed by thermal treatment. The preparation is based on an assembly process, with evaporation of an ethanol-water solution containing melamine formaldehyde resin (MF resin) as carbon source, nitrogen source, and chelating agent. Moreover, F127 and Co(NO 3 ) 2 are used as template and metallic precursor, respectively. The Co nanoparticles embedded, N-doped mesoporous carbon annealed at 800 °C (denoted as MFCo800) shows high electrocatalytic activity for hydrogen evolution reaction (HER) with high current density and low overpotential, which has the ability to operate in both acidic and alkaline electrolytes. Copyright © 2017. Published by Elsevier Inc.

Will farmers intend to cultivate Provitamin A genetically modified (GM) cassava in Nigeria? Evidence from a k-means segmentation analysis of beliefs and attitudes

PubMed Central

Abdoulaye, Tahirou; Mignouna, Djana Babatima; Bamire, Adebayo Simeon

2017-01-01

Analysis of market segments within a population remains critical to agricultural systems and policy processes for targeting new innovations. Patterns in attitudes and intentions toward cultivating Provitamin A GM cassava are examined through the use of a combination of behavioural theory and k-means cluster analysis method, investigating the interrelationship among various behavioural antecedents. Using a state-level sample of smallholder cassava farmers in Nigeria, this paper identifies three distinct classes of attitude and intention denoted as low opposition, medium opposition and high opposition farmers. It was estimated that only 25% of the surveyed population of farmers was highly opposed to cultivating Provitamin A GM cassava. PMID:28700605

Effects of predation efficiencies on the dynamics of a tritrophic food chain.

PubMed

Cassinari, Maria Paola; Groppi, Maria; Tebaldi, Claudio

2007-07-01

In this paper the dynamics of a tritrophic food chain (resource, consumer, top predator) is investigated, with particular attention not only to equilibrium states but also to cyclic behaviours that the system may exhibit. The analysis is performed in terms of two bifurcation parameters, denoted by p and q, which measure the efficiencies of the interaction processes. The persistence of the system is discussed, characterizing in the (p; q) plane the regions of existence and stability of biologically significant steady states and those of existence of limit cycles. The bifurcations occurring are discussed, and their implications with reference to biological control problems are considered. Examples of the rich dynamics exhibited by the model, including a chaotic regime, are described.

Monomorphism of cytidine (Cyd) vs. polymorphism of 2'deoxycytidine (dCyd). Structural and functional consequences

NASA Astrophysics Data System (ADS)

Wiewiórowski, M.; Alejska, M.; Malinowska, N.; Bratek-Wiewiórowska, M. D.

1997-12-01

It has been found that 2'deoxycytidine (dCyd) crystallizes in different forms, denoted dCyd A, dCyd B and dCyd C·H 2O. In the crystal lattice of the newly discovered form dCydC·H 2O there is a crystalline water molecule present. The monohydrate of dCydC, under suitable conditions (RT, over P 2O 5, 48h), undergoes transformation into the fully dehydrated form—dCydC anhydro. The whole process of de- and re-hydratation has been observed by FTIR-PAS spectroscopy. The nature of the differences and similarities between structural and functional properties of crystalline forms of 2'dCyd and Cyd molecules has been discussed.

Detection of free liquid in drums of radioactive waste. [Patent application

DOEpatents

Not Available

1979-10-16

A nondestructive thermal imaging method for detecting the presence of a liquid such as water within a sealed container is described. The process includes application of a low amplitude heat pulse to an exterior surface area of the container, terminating the heat input and quickly mapping the resulting surface temperatures. The various mapped temperature values can be compared with those known to be normal for the container material and substances in contact. The mapped temperature values show up in different shades of light or darkness that denote different physical substances. The different substances can be determined by direct observation or by comparison with known standards. The method is particularly applicable to the detection of liquids above solidified radioactive wastes stored in sealed containers.

Application Of The Iberdrola Licensing Methodology To The Cofrentes BWR-6 110% Extended Power Up-rate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mata, Pedro; Fuente, Rafael de la; Iglesias, Javier

Iberdrola (spanish utility) and Iberdrola Ingenieria (engineering branch) have been developing during the last two years the 110% Extended Power Up-rate Project (EPU 110%) for Cofrentes BWR-6. IBERDROLA has available an in-house design and licensing reload methodology that has been approved by the Spanish Nuclear Regulatory Authority. This methodology has been already used to perform the nuclear design and the reload licensing analysis for Cofrentes cycles 12 to 14. The methodology has been also applied to develop a significant number of safety analysis of the Cofrentes Extended Power Up-rate including: Reactor Heat Balance, Core and Fuel performance, Thermal Hydraulic Stability,more » ECCS LOCA Evaluation, Transient Analysis, Anticipated Transient Without Scram (ATWS) and Station Blackout (SBO) Since the scope of the licensing process of the Cofrentes Extended Power Up-rate exceeds the range of analysis included in the Cofrentes generic reload licensing process, it has been required to extend the applicability of the Cofrentes licensing methodology to the analysis of new transients. This is the case of the TLFW transient. The content of this paper shows the benefits of having an in-house design and licensing methodology, and describes the process to extend the applicability of the methodology to the analysis of new transients. The case of analysis of Total Loss of Feedwater with the Cofrentes Retran Model is included as an example of this process. (authors)« less

7 CFR 58.159 - Terms.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and odor which is detectable. (e) Extraneous matter. Foreign substances, such as filth, hair, insects...-in-Place.” (h) Mechanical cleaning. Denotes cleaning solely by circulation and/or flowing chemical...

7 CFR 58.159 - Terms.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and odor which is detectable. (e) Extraneous matter. Foreign substances, such as filth, hair, insects...-in-Place.” (h) Mechanical cleaning. Denotes cleaning solely by circulation and/or flowing chemical...

7 CFR 58.159 - Terms.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and odor which is detectable. (e) Extraneous matter. Foreign substances, such as filth, hair, insects...-in-Place.” (h) Mechanical cleaning. Denotes cleaning solely by circulation and/or flowing chemical...

Molecular dynamics simulations of the diffusion and coalescence of helium in tungsten

NASA Astrophysics Data System (ADS)

Zhou, Y. L.; Wang, J.; Hou, Q.; Deng, A. H.

2014-03-01

Molecular dynamics (MD) simulations are performed on the diffusion and coalescence of helium in tungsten. A new method for determining the effective capture radii (ECRs) and the dissociation energies of helium-related defects is proposed in this work. It is observed that the ECR of an interstitial helium atom trapping helium interstitials (denoted as He-Hen, n = 1-3) decreases with increasing temperature, except for He-He2 at T < 400 K. The traditional view that the ECR is approximately equal to the lattice constant, which has been widely used in kinetic Monte Carlo (KMC) and rate theory (RT) models, is only valid in some cases. However, the ECR between an interstitial helium atom and a substitutional helium atom (denoted as He-HeV) always approximates the third nearest-neighbor tetrahedral positions of the HeV. The diffusion coefficients Dn for helium clusters are also investigated. He2 migrates more quickly than a single He atom does at T < 400 K, whereas the diffusion path of He2 changes at higher temperatures. Another counterintuitive observation is that D5 > D3 > D4 at T < 500 K, which can be attributed to the disordered structure of He5. The Arrhenius relation describes the diffusion of Hen well in the temperature range from 300 K to 550 K, whereas the diffusion is not a standard thermally activated process at higher temperatures. Taken together, these results help elucidate the initial stage of helium bubble formation in tungsten as well as the requirements of long-term evolution methods such as KMC or RT models.

[Optimization of process of icraiin be hydrolyzed to Baohuoside I by cellulase based on Plackett-Burman design combined with CCD response surface methodology].

PubMed

Song, Chuan-xia; Chen, Hong-mei; Dai, Yu; Kang, Min; Hu, Jia; Deng, Yun

2014-11-01

To optimize the process of Icraiin be hydrolyzed to Baohuoside I by cellulase by Plackett-Burman design combined with Central Composite Design (CCD) response surface methodology. To select the main influencing factors by Plackett-Burman design, using CCD response surface methodology to optimize the process of Icraiin be hydrolyzed to Baohuoside I by cellulase. Taking substrate concentration, the pH of buffer and reaction time as independent variables, with conversion rate of icariin as dependent variable,using regression fitting of completely quadratic response surface between independent variable and dependent variable,the optimum process of Icraiin be hydrolyzed to Baohuoside I by cellulase was intuitively analyzed by 3D surface chart, and taking verification tests and predictive analysis. The best enzymatic hydrolytic process was as following: substrate concentration 8. 23 mg/mL, pH 5. 12 of buffer,reaction time 35. 34 h. The optimum process of Icraiin be hydrolyzed to Baohuoside I by cellulase is determined by Plackett-Burman design combined with CCD response surface methodology. The optimized enzymatic hydrolytic process is simple, convenient, accurate, reproducible and predictable.

A Novel Methodology for Improving Plant Pest Surveillance in Vineyards and Crops Using UAV-Based Hyperspectral and Spatial Data.

PubMed

Vanegas, Fernando; Bratanov, Dmitry; Powell, Kevin; Weiss, John; Gonzalez, Felipe

2018-01-17

Recent advances in remote sensed imagery and geospatial image processing using unmanned aerial vehicles (UAVs) have enabled the rapid and ongoing development of monitoring tools for crop management and the detection/surveillance of insect pests. This paper describes a (UAV) remote sensing-based methodology to increase the efficiency of existing surveillance practices (human inspectors and insect traps) for detecting pest infestations (e.g., grape phylloxera in vineyards). The methodology uses a UAV integrated with advanced digital hyperspectral, multispectral, and RGB sensors. We implemented the methodology for the development of a predictive model for phylloxera detection. In this method, we explore the combination of airborne RGB, multispectral, and hyperspectral imagery with ground-based data at two separate time periods and under different levels of phylloxera infestation. We describe the technology used-the sensors, the UAV, and the flight operations-the processing workflow of the datasets from each imagery type, and the methods for combining multiple airborne with ground-based datasets. Finally, we present relevant results of correlation between the different processed datasets. The objective of this research is to develop a novel methodology for collecting, processing, analising and integrating multispectral, hyperspectral, ground and spatial data to remote sense different variables in different applications, such as, in this case, plant pest surveillance. The development of such methodology would provide researchers, agronomists, and UAV practitioners reliable data collection protocols and methods to achieve faster processing techniques and integrate multiple sources of data in diverse remote sensing applications.

Improved Method of Manufacturing SiC Devices

NASA Technical Reports Server (NTRS)

Okojie, Robert S.

2005-01-01

The phrase, "common-layered architecture for semiconductor silicon carbide" ("CLASSiC") denotes a method of batch fabrication of microelectromechanical and semiconductor devices from bulk silicon carbide. CLASSiC is the latest in a series of related methods developed in recent years in continuing efforts to standardize SiC-fabrication processes. CLASSiC encompasses both institutional and technological innovations that can be exploited separately or in combination to make the manufacture of SiC devices more economical. Examples of such devices are piezoresistive pressure sensors, strain gauges, vibration sensors, and turbulence-intensity sensors for use in harsh environments (e.g., high-temperature, high-pressure, corrosive atmospheres). The institutional innovation is to manufacture devices for different customers (individuals, companies, and/or other entities) simultaneously in the same batch. This innovation is based on utilization of the capability for fabrication, on the same substrate, of multiple SiC devices having different functionalities (see figure). Multiple customers can purchase shares of the area on the same substrate, each customer s share being apportioned according to the customer s production-volume requirement. This makes it possible for multiple customers to share costs in a common foundry, so that the capital equipment cost per customer in the inherently low-volume SiC-product market can be reduced significantly. One of the technological innovations is a five-mask process that is based on an established set of process design rules. The rules provide for standardization of the fabrication process, yet are flexible enough to enable multiple customers to lay out masks for their portions of the SiC substrate to provide for simultaneous batch fabrication of their various devices. In a related prior method, denoted multi-user fabrication in silicon carbide (MUSiC), the fabrication process is based largely on surface micromachining of poly SiC. However, in MUSiC one cannot exploit the superior sensing, thermomechanical, and electrical properties of single-crystal 6H-SiC or 4H-SiC. As a complement to MUSiC, the CLASSiC five-mask process can be utilized to fabricate multiple devices in bulk single-crystal SiC of any polytype. The five-mask process makes fabrication less complex because it eliminates the need for large-area deposition and removal of sacrificial material. Other innovations in CLASSiC pertain to selective etching of indium tin oxide and aluminum in connection with multilayer metallization. One major characteristic of bulk micromachined microelectromechanical devices is the presence of three-dimensional (3D) structures. Any 3D recesses that already exist at a given step in a fabrication process usually make it difficult to apply a planar coat of photoresist for metallization and other subsequent process steps. To overcome this difficulty, the CLASSiC process includes a reversal of part of the conventional flow: Metallization is performed before the recesses are etched.

A Nursing Process Methodology.

ERIC Educational Resources Information Center

Ryan-Wenger, Nancy M.

1990-01-01

A nursing methodology developed by the faculty at The Ohio State University teaches nursing students problem-solving techniques applicable to any nursing situation. It also provides faculty and students with a basis for measuring students' progress and ability in applying the nursing process. (Author)

Risk Assessment Methodology for Hazardous Waste Management (1998)

EPA Pesticide Factsheets

A methodology is described for systematically assessing and comparing the risks to human health and the environment of hazardous waste management alternatives. The methodology selects and links appropriate models and techniques for performing the process.

Bridging the gap between neurocognitive processing theory and performance validity assessment among the cognitively impaired: a review and methodological approach.

PubMed

Leighton, Angela; Weinborn, Michael; Maybery, Murray

2014-10-01

Bigler (2012) and Larrabee (2012) recently addressed the state of the science surrounding performance validity tests (PVTs) in a dialogue highlighting evidence for the valid and increased use of PVTs, but also for unresolved problems. Specifically, Bigler criticized the lack of guidance from neurocognitive processing theory in the PVT literature. For example, individual PVTs have applied the simultaneous forced-choice methodology using a variety of test characteristics (e.g., word vs. picture stimuli) with known neurocognitive processing implications (e.g., the "picture superiority effect"). However, the influence of such variations on classification accuracy has been inadequately evaluated, particularly among cognitively impaired individuals. The current review places the PVT literature in the context of neurocognitive processing theory, and identifies potential methodological factors to account for the significant variability we identified in classification accuracy across current PVTs. We subsequently evaluated the utility of a well-known cognitive manipulation to provide a Clinical Analogue Methodology (CAM), that is, to alter the PVT performance of healthy individuals to be similar to that of a cognitively impaired group. Initial support was found, suggesting the CAM may be useful alongside other approaches (analogue malingering methodology) for the systematic evaluation of PVTs, particularly the influence of specific neurocognitive processing components on performance.

Using Dual-Task Methodology to Dissociate Automatic from Nonautomatic Processes Involved in Artificial Grammar Learning

ERIC Educational Resources Information Center

Hendricks, Michelle A.; Conway, Christopher M.; Kellogg, Ronald T.

2013-01-01

Previous studies have suggested that both automatic and intentional processes contribute to the learning of grammar and fragment knowledge in artificial grammar learning (AGL) tasks. To explore the relative contribution of automatic and intentional processes to knowledge gained in AGL, we utilized dual-task methodology to dissociate automatic and…

Toward a Collective Approach to Course Evaluation in Curriculum Development, A Contemporary Perspective

ERIC Educational Resources Information Center

Nyabero, Charles

2016-01-01

The purpose of this article was to explore on how course evaluation, decision making process, the methodology of evaluation and various roles of evaluation interact in the process of curriculum development. In the process of this exploration, the characteristics the types of evaluation, purposes of course evaluation, methodology of evaluation,…

How to Measure the Intervention Process? An Assessment of Qualitative and Quantitative Approaches to Data Collection in the Process Evaluation of Organizational Interventions

PubMed Central

Abildgaard, Johan S.; Saksvik, Per Ø.; Nielsen, Karina

2016-01-01

Organizational interventions aiming at improving employee health and wellbeing have proven to be challenging to evaluate. To analyze intervention processes two methodological approaches have widely been used: quantitative (often questionnaire data), or qualitative (often interviews). Both methods are established tools, but their distinct epistemological properties enable them to illuminate different aspects of organizational interventions. In this paper, we use the quantitative and qualitative process data from an organizational intervention conducted in a national postal service, where the Intervention Process Measure questionnaire (N = 285) as well as an extensive interview study (N = 50) were used. We analyze what type of knowledge about intervention processes these two methodologies provide and discuss strengths and weaknesses as well as potentials for mixed methods evaluation methodologies. PMID:27713707

How to Measure the Intervention Process? An Assessment of Qualitative and Quantitative Approaches to Data Collection in the Process Evaluation of Organizational Interventions.

PubMed

Abildgaard, Johan S; Saksvik, Per Ø; Nielsen, Karina

2016-01-01

Organizational interventions aiming at improving employee health and wellbeing have proven to be challenging to evaluate. To analyze intervention processes two methodological approaches have widely been used: quantitative (often questionnaire data), or qualitative (often interviews). Both methods are established tools, but their distinct epistemological properties enable them to illuminate different aspects of organizational interventions. In this paper, we use the quantitative and qualitative process data from an organizational intervention conducted in a national postal service, where the Intervention Process Measure questionnaire ( N = 285) as well as an extensive interview study ( N = 50) were used. We analyze what type of knowledge about intervention processes these two methodologies provide and discuss strengths and weaknesses as well as potentials for mixed methods evaluation methodologies.

What's in a name? Coming to terms with the child's linguistic environment.

PubMed

Saxton, Matthew

2008-08-01

This article reviews the proliferation of terms that have been coined to denote the language environment of the young child. It is argued that terms are often deployed by researchers without due consideration of their appropriateness for particular empirical studies. It is further suggested that just three of the dozen or more available terms meet the needs of child language researchers in most instances: CHILD-DIRECTED SPEECH, INFANT-DIRECTED SPEECH AND EXPOSURE LANGUAGE. The phenomena denoted by these terms are then considered. The term register is generally borrowed for this purpose from sociolinguistics. However, close inspection of this concept reveals that the notion of register needs to be constrained, in specified ways, in order to be of any real value within the field of child language research.

Effect of different types of commercial feed meal on the growth forms of Barbonymus schwanenfeldii (Lampam) in Chini Lake, Malaysia

NASA Astrophysics Data System (ADS)

Mansour, Omran; Idris, Mushrifah; Das, Simon Kumar

2016-11-01

This study was carried out at Tasik Chini where the effects of different feeds on growth form of B. schwanenfeldii were calculated using length weight relationship analysis (W = aLb). The results denotes that feeding high protein diet (32% protein) fish represent positive allometric growth (b > 3) while feeding lower protein diet (23 and 28% protein) fish represent negative allometric (b < 3) growth. The calculated condition factor values also denotes similar trends, feeding high protein diet fish represent better condition (K=51) compared to fed on lower protein diet. The data obtained from this study suggests to culture B. schwanenfeldii with high protein diet (32%) which will facilitate better growth form and condition consequently optimize the production of this commercially important fish species.

Compact stars in the non-minimally coupled electromagnetic fields to gravity

NASA Astrophysics Data System (ADS)

Sert, Özcan

2018-03-01

We investigate the gravitational models with the non-minimal Y(R)F^2 coupled electromagnetic fields to gravity, in order to describe charged compact stars, where Y( R) denotes a function of the Ricci curvature scalar R and F^2 denotes the Maxwell invariant term. We determine two parameter family of exact spherically symmetric static solutions and the corresponding non-minimal model without assuming any relation between energy density of matter and pressure. We give the mass-radius, electric charge-radius ratios and surface gravitational redshift which are obtained by the boundary conditions. We reach a wide range of possibilities for the parameters k and α in these solutions. Lastly we show that the models can describe the compact stars even in the more simple case α =3.

A prototype computerized synthesis methodology for generic space access vehicle (SAV) conceptual design

NASA Astrophysics Data System (ADS)

Huang, Xiao

2006-04-01

Today's and especially tomorrow's competitive launch vehicle design environment requires the development of a dedicated generic Space Access Vehicle (SAV) design methodology. A total of 115 industrial, research, and academic aircraft, helicopter, missile, and launch vehicle design synthesis methodologies have been evaluated. As the survey indicates, each synthesis methodology tends to focus on a specific flight vehicle configuration, thus precluding the key capability to systematically compare flight vehicle design alternatives. The aim of the research investigation is to provide decision-making bodies and the practicing engineer a design process and tool box for robust modeling and simulation of flight vehicles where the ultimate performance characteristics may hinge on numerical subtleties. This will enable the designer of a SAV for the first time to consistently compare different classes of SAV configurations on an impartial basis. This dissertation presents the development steps required towards a generic (configuration independent) hands-on flight vehicle conceptual design synthesis methodology. This process is developed such that it can be applied to any flight vehicle class if desired. In the present context, the methodology has been put into operation for the conceptual design of a tourist Space Access Vehicle. The case study illustrates elements of the design methodology & algorithm for the class of Horizontal Takeoff and Horizontal Landing (HTHL) SAVs. The HTHL SAV design application clearly outlines how the conceptual design process can be centrally organized, executed and documented with focus on design transparency, physical understanding and the capability to reproduce results. This approach offers the project lead and creative design team a management process and tool which iteratively refines the individual design logic chosen, leading to mature design methods and algorithms. As illustrated, the HTHL SAV hands-on design methodology offers growth potential in that the same methodology can be continually updated and extended to other SAV configuration concepts, such as the Vertical Takeoff and Vertical Landing (VTVL) SAV class. Having developed, validated and calibrated the methodology for HTHL designs in the 'hands-on' mode, the report provides an outlook how the methodology will be integrated into a prototype computerized design synthesis software AVDS-PrADOSAV in a follow-on step.

Improving ED specimen TAT using Lean Six Sigma.

PubMed

Sanders, Janet H; Karr, Tedd

2015-01-01

Lean and Six Sigma are continuous improvement methodologies that have garnered international fame for improving manufacturing and service processes. Increasingly these methodologies are demonstrating their power to also improve healthcare processes. The purpose of this paper is to discuss a case study for the application of Lean and Six Sigma tools in the reduction of turnaround time (TAT) for Emergency Department (ED) specimens. This application of the scientific methodologies uncovered opportunities to improve the entire ED to lab system for the specimens. This case study provides details on the completion of a Lean Six Sigma project in a 1,000 bed tertiary care teaching hospital. Six Sigma's Define, Measure, Analyze, Improve, and Control methodology is very similar to good medical practice: first, relevant information is obtained and assembled; second, a careful and thorough diagnosis is completed; third, a treatment is proposed and implemented; and fourth, checks are made to determine if the treatment was effective. Lean's primary goal is to do more with less work and waste. The Lean methodology was used to identify and eliminate waste through rapid implementation of change. The initial focus of this project was the reduction of turn-around-times for ED specimens. However, the results led to better processes for both the internal and external customers of this and other processes. The project results included: a 50 percent decrease in vials used for testing, a 50 percent decrease in unused or extra specimens, a 90 percent decrease in ED specimens without orders, a 30 percent decrease in complete blood count analysis (CBCA) Median TAT, a 50 percent decrease in CBCA TAT Variation, a 10 percent decrease in Troponin TAT Variation, a 18.2 percent decrease in URPN TAT Variation, and a 2-5 minute decrease in ED registered nurses rainbow draw time. This case study demonstrated how the quantitative power of Six Sigma and the speed of Lean worked in harmony to improve the blood draw process for a 1,000 bed tertiary care teaching hospital. The blood draw process is a standard process used in hospitals to collect blood chemistry and hematology information for clinicians. The methods used in this case study demonstrated valuable and practical applications of process improvement methodologies that can be used for any hospital process and/or service environment. While this is not the first case study that has demonstrated the use of continuous process improvement methodologies to improve a hospital process, it is unique in the way in which it utilizes the strength of the project focussed approach that adheres more to the structure and rigor of Six Sigma and relied less on the speed of lean. Additionally, the application of these methodologies in healthcare is emerging research.

A Quantitative Examination of Critical Success Factors Comparing Agile and Waterfall Project Management Methodologies

ERIC Educational Resources Information Center

Pedersen, Mitra

2013-01-01

This study investigated the rate of success for IT projects using agile and standard project management methodologies. Any successful project requires use of project methodology. Specifically, large projects require formal project management methodologies or models, which establish a blueprint of processes and project planning activities. This…

7 CFR 58.159 - Terms.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Regional feed flavors, such as alfalfa, clover, silage, or similar feeds or grasses (weed flavors, such as...-in-Place.” (h) Mechanical cleaning. Denotes cleaning solely by circulation and/or flowing chemical...

7 CFR 58.159 - Terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Regional feed flavors, such as alfalfa, clover, silage, or similar feeds or grasses (weed flavors, such as...-in-Place.” (h) Mechanical cleaning. Denotes cleaning solely by circulation and/or flowing chemical...

Computer-Aided Sensor Development Focused on Security Issues.

PubMed

Bialas, Andrzej

2016-05-26

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research.

Computer-Aided Sensor Development Focused on Security Issues

PubMed Central

Bialas, Andrzej

2016-01-01

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research. PMID:27240360

The Devil is in the Concepts: Lessons Learned from World War II Planning Staffs for Transitioning from Conceptual to Detailed Planning

DTIC Science & Technology

2017-05-25

the planning process. Current US Army doctrine links conceptual planning to the Army Design Methodology and detailed planning to the Military...Decision Making Process. By associating conceptual and detailed planning with doctrinal methodologies , it is easy to regard the transition as a set period...plans into detailed directives resulting in changes to the operational environment. 15. SUBJECT TERMS Design; Army Design Methodology ; Conceptual

Characteristic of nitrous oxide production in partial denitrification process with high nitrite accumulation.

PubMed

Du, Rui; Peng, Yongzhen; Cao, Shenbin; Wang, Shuying; Niu, Meng

2016-03-01

Nitrous oxide (N2O) production during the partial denitrification process with nitrate (NO3(-)-N) to nitrite (NO2(-)-N) transformation ratio of 80% was investigated in this study. Results showed that N2O was seldom observed before complete depletion of NO3(-)-N, but it was closely related to the reduction of NO2(-)-N rather than NO3(-)-N. High COD/NO3(-)-N was in favor of N2O production in partial denitrification with high NO2(-)-N accumulation. It was seriously enhanced at constant acidic pH due to the free nitrous acid (FNA) inhibition. However, the N2O production was much lower at initial pH of 5.5 and 6.5 due to the pH increase during denitrification process. Significantly, the pH turning point could be chosen as a controlled parameter to denote the end of NO3(-)-N reduction, which could not only achieve high NO2(-)-N accumulation but also decrease the N2O production significantly for practical application. Copyright © 2015 Elsevier Ltd. All rights reserved.

The integration of emotional and symbolic components in multimodal communication

PubMed Central

Mehu, Marc

2015-01-01

Human multimodal communication can be said to serve two main purposes: information transfer and social influence. In this paper, I argue that different components of multimodal signals play different roles in the processes of information transfer and social influence. Although the symbolic components of communication (e.g., verbal and denotative signals) are well suited to transfer conceptual information, emotional components (e.g., non-verbal signals that are difficult to manipulate voluntarily) likely take a function that is closer to social influence. I suggest that emotion should be considered a property of communicative signals, rather than an entity that is transferred as content by non-verbal signals. In this view, the effect of emotional processes on communication serve to change the quality of social signals to make them more efficient at producing responses in perceivers, whereas symbolic components increase the signals’ efficiency at interacting with the cognitive processes dedicated to the assessment of relevance. The interaction between symbolic and emotional components will be discussed in relation to the need for perceivers to evaluate the reliability of multimodal signals. PMID:26217280

Identifying potential misfit items in cognitive process of learning engineering mathematics based on Rasch model

NASA Astrophysics Data System (ADS)

Ataei, Sh; Mahmud, Z.; Khalid, M. N.

2014-04-01

The students learning outcomes clarify what students should know and be able to demonstrate after completing their course. So, one of the issues on the process of teaching and learning is how to assess students' learning. This paper describes an application of the dichotomous Rasch measurement model in measuring the cognitive process of engineering students' learning of mathematics. This study provides insights into the perspective of 54 engineering students' cognitive ability in learning Calculus III based on Bloom's Taxonomy on 31 items. The results denote that some of the examination questions are either too difficult or too easy for the majority of the students. This analysis yields FIT statistics which are able to identify if there is data departure from the Rasch theoretical model. The study has identified some potential misfit items based on the measurement of ZSTD where the removal misfit item was accomplished based on the MNSQ outfit of above 1.3 or less than 0.7 logit. Therefore, it is recommended that these items be reviewed or revised to better match the range of students' ability in the respective course.

Evaluation of the effect of roasting process on the energy transition and the crystalline structures of Arabica, Robusta, and Liberica coffee from Jambi Indonesia

NASA Astrophysics Data System (ADS)

Perdana, B. M.; Manihuruk, R.; Ashyar, R.; Heriyanti; Sutrisno

2018-04-01

The effect of the roasting process has been evaluated to determine of the energy transition and the crystalline structure of three types of coffee, Arabica, Robusta, and Liberica coffee both green and roasted coffee with the roasted temperature at 200°C and 230°C. The crystalline structure of the coffee was evaluated with X-ray powder diffraction (XRD). The result exposes that the three types of green coffee showed that an amorphous structure whereas the roasted coffee denotes a crystal structure of sucrose. The varied temperature in the roasting process leads to changes in the crystal structure shown by the peak shift of 2θ for all types of coffee. The added cations, such as Fe2+, Ca2+, and Mg2+ ions on Liberica coffee induced of changes in the crystal structures, which are assigned by the peak shift, that imply of metal ions of the sucrose complexes happened in the solution, except for the addition of Mg2+ ion.

Enhanced electronic and electrochemical properties of core-shelled V2O5-Pt nanowires

NASA Astrophysics Data System (ADS)

Pan, Ko-Ying; Wei, Da-Hua

2018-01-01

Platinum nanoparticles (Pt NPs) were decorated on vanadium pentoxide nanowires (V2O5 NWs) to form the core-shelled vanadium-platinum nanowires (Pt@V2O5 NWs) and their electrochemical activities for methanol oxidation were investigated. The synthetic procedure involved the synthesis of abundant vanadium pentoxide nanowires (V2O5 NWs) by a direct vapor-solid growth process (VS method), followed by atomic layer depositions (ALD) of platinum nanoparticles (Pt NPs) onto the V2O5 NWs. After the physical examinations, three designed deposition parameters (50, 100 and 150 cycles) of Pt NPs onto the V2O5 NWs by ALD process were successful. From the measurements of current-voltage (I-V) and cyclic voltammetry (CV) curves respectively, both the conductivity and the ratio of the forward anodic peak current (IF) to the reverse anodic peak current (IR) are enhancing proportionately to the deposition cycles of ALD process, which denotes that coating Pt atomic layers onto V2O5 nanowires indeed improves the catalytic performances than that of pure V2O5 nanowires.

Time-compressed spoken word primes crossmodally enhance processing of semantically congruent visual targets.

PubMed

Mahr, Angela; Wentura, Dirk

2014-02-01

Findings from three experiments support the conclusion that auditory primes facilitate the processing of related targets. In Experiments 1 and 2, we employed a crossmodal Stroop color identification task with auditory color words (as primes) and visual color patches (as targets). Responses were faster for congruent priming, in comparison to neutral or incongruent priming. This effect also emerged for different levels of time compression of the auditory primes (to 30 % and 10 % of the original length; i.e., 120 and 40 ms) and turned out to be even more pronounced under high-perceptual-load conditions (Exps. 1 and 2). In Experiment 3, target-present or -absent decisions for brief target displays had to be made, thereby ruling out response-priming processes as a cause of the congruency effects. Nevertheless, target detection (d') was increased by congruent primes (30 % compression) in comparison to incongruent or neutral primes. Our results suggest semantic object-based auditory-visual interactions, which rapidly increase the denoted target object's salience. This would apply, in particular, to complex visual scenes.

Auto-Generated Semantic Processing Services

NASA Technical Reports Server (NTRS)

Davis, Rodney; Hupf, Greg

2009-01-01

Auto-Generated Semantic Processing (AGSP) Services is a suite of software tools for automated generation of other computer programs, denoted cross-platform semantic adapters, that support interoperability of computer-based communication systems that utilize a variety of both new and legacy communication software running in a variety of operating- system/computer-hardware combinations. AGSP has numerous potential uses in military, space-exploration, and other government applications as well as in commercial telecommunications. The cross-platform semantic adapters take advantage of common features of computer- based communication systems to enforce semantics, messaging protocols, and standards of processing of streams of binary data to ensure integrity of data and consistency of meaning among interoperating systems. The auto-generation aspect of AGSP Services reduces development time and effort by emphasizing specification and minimizing implementation: In effect, the design, building, and debugging of software for effecting conversions among complex communication protocols, custom device mappings, and unique data-manipulation algorithms is replaced with metadata specifications that map to an abstract platform-independent communications model. AGSP Services is modular and has been shown to be easily integrable into new and legacy NASA flight and ground communication systems.

Psychoanalysis of maturescence (definition, metapsychology, and clinical practice).

PubMed

Montero, Mag Guillermo Julio

2015-12-01

This article offers an entirely new way of addressing middle age or mid-life. It uses the neologism maturescence to denote this process's metapsychological feature, and it proposes a meta-psychology of maturescence in order to allow a 'direct understanding of maturescence' instead of the 'indirect understanding of maturescence', which psychoanalytic literature generally alludes to. The paper examines somatic processes specific to male and female climacterics and is focused on to the tension between the soma and the body. It examines the drive increase that Freud posed in climacterics and the somatic climacteric imbalance that begets specific drive activity demanding psychic work, with very different pathways depending on the individual's specific working-through activity. It discusses what happens to the individual when he/she is no longer able to procreate and begins to age; why this process is equivalent for individuals who had children and for others who could not or did not. This somatic event provides a universal constant from which it is possible to understand any individual variable. Copyright © 2015 Institute of Psychoanalysis.

Prediction of Tensile Strength of Friction Stir Weld Joints with Adaptive Neuro-Fuzzy Inference System (ANFIS) and Neural Network

NASA Technical Reports Server (NTRS)

Dewan, Mohammad W.; Huggett, Daniel J.; Liao, T. Warren; Wahab, Muhammad A.; Okeil, Ayman M.

2015-01-01

Friction-stir-welding (FSW) is a solid-state joining process where joint properties are dependent on welding process parameters. In the current study three critical process parameters including spindle speed (??), plunge force (????), and welding speed (??) are considered key factors in the determination of ultimate tensile strength (UTS) of welded aluminum alloy joints. A total of 73 weld schedules were welded and tensile properties were subsequently obtained experimentally. It is observed that all three process parameters have direct influence on UTS of the welded joints. Utilizing experimental data, an optimized adaptive neuro-fuzzy inference system (ANFIS) model has been developed to predict UTS of FSW joints. A total of 1200 models were developed by varying the number of membership functions (MFs), type of MFs, and combination of four input variables (??,??,????,??????) utilizing a MATLAB platform. Note EFI denotes an empirical force index derived from the three process parameters. For comparison, optimized artificial neural network (ANN) models were also developed to predict UTS from FSW process parameters. By comparing ANFIS and ANN predicted results, it was found that optimized ANFIS models provide better results than ANN. This newly developed best ANFIS model could be utilized for prediction of UTS of FSW joints.

Utilization of Lean Methodology to Refine Hiring Practices in a Clinical Research Center Setting

ERIC Educational Resources Information Center

Johnson, Marcus R.; Bullard, A. Jasmine; Whitley, R. Lawrence

2018-01-01

Background & Aims: Lean methodology is a continuous process improvement approach that is used to identify and eliminate unnecessary steps (or waste) in a process. It increases the likelihood that the highest level of value possible is provided to the end-user, or customer, in the form of the product delivered through that process. Lean…

7 CFR 301.75-1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... nursery stock maintained in climate-controlled greenhouses in 4-or 6-inch diameter pots until it is sold... denoting change of fruit variety. Infected. Containing bacteria that cause citrus canker. Infestation. The...

7 CFR 301.75-1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... nursery stock maintained in climate-controlled greenhouses in 4-or 6-inch diameter pots until it is sold... denoting change of fruit variety. Infected. Containing bacteria that cause citrus canker. Infestation. The...

7 CFR 301.75-1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... nursery stock maintained in climate-controlled greenhouses in 4-or 6-inch diameter pots until it is sold... denoting change of fruit variety. Infected. Containing bacteria that cause citrus canker. Infestation. The...

Fiber-Scanned Microdisplays

NASA Technical Reports Server (NTRS)

Crossman-Bosworth, Janet; Seibel, Eric

2010-01-01

Helmet- and head-mounted display systems, denoted fiber-scanned microdisplays, have been proposed to provide information in an "augmented reality" format (meaning that the information would be optically overlaid on the user's field of view).

An industrial ecology approach to municipal solid waste ...

EPA Pesticide Factsheets

Municipal solid waste (MSW) can be viewed as a feedstock for industrial ecology inspired conversions of wastes to valuable products and energy. The industrial ecology principle of symbiotic processes using waste streams for creating value-added products is applied to MSW, with examples suggested for various residual streams. A methodology is presented to consider individual waste-to-energy or waste-to-product system synergies, evaluating the economic and environmental issues associated with each system. Steps included in the methodology include identifying waste streams, specific waste components of interest, and conversion technologies, plus steps for determining the economic and environmental effects of using wastes and changes due to transport, administrative handling, and processing. In addition to presenting the methodology, technologies for various MSW input streams are categorized as commercialized or demonstrated to provide organizations that are considering processes for MSW with summarized information. The organization can also follow the methodology to analyze interesting processes. Presents information useful for analyzing the sustainability of alternatives for the management of municipal solid waste.

Weighted Ensemble Simulation: Review of Methodology, Applications, and Software.

PubMed

Zuckerman, Daniel M; Chong, Lillian T

2017-05-22

The weighted ensemble (WE) methodology orchestrates quasi-independent parallel simulations run with intermittent communication that can enhance sampling of rare events such as protein conformational changes, folding, and binding. The WE strategy can achieve superlinear scaling-the unbiased estimation of key observables such as rate constants and equilibrium state populations to greater precision than would be possible with ordinary parallel simulation. WE software can be used to control any dynamics engine, such as standard molecular dynamics and cell-modeling packages. This article reviews the theoretical basis of WE and goes on to describe successful applications to a number of complex biological processes-protein conformational transitions, (un)binding, and assembly processes, as well as cell-scale processes in systems biology. We furthermore discuss the challenges that need to be overcome in the next phase of WE methodological development. Overall, the combined advances in WE methodology and software have enabled the simulation of long-timescale processes that would otherwise not be practical on typical computing resources using standard simulation.

A prototype software methodology for the rapid evaluation of biomanufacturing process options.

PubMed

Chhatre, Sunil; Francis, Richard; O'Donovan, Kieran; Titchener-Hooker, Nigel J; Newcombe, Anthony R; Keshavarz-Moore, Eli

2007-10-01

A three-layered simulation methodology is described that rapidly evaluates biomanufacturing process options. In each layer, inferior options are screened out, while more promising candidates are evaluated further in the subsequent, more refined layer, which uses more rigorous models that require more data from time-consuming experimentation. Screening ensures laboratory studies are focused only on options showing the greatest potential. To simplify the screening, outputs of production level, cost and time are combined into a single value using multi-attribute-decision-making techniques. The methodology was illustrated by evaluating alternatives to an FDA (U.S. Food and Drug Administration)-approved process manufacturing rattlesnake antivenom. Currently, antivenom antibodies are recovered from ovine serum by precipitation/centrifugation and proteolyzed before chromatographic purification. Alternatives included increasing the feed volume, replacing centrifugation with microfiltration and replacing precipitation/centrifugation with a Protein G column. The best alternative used a higher feed volume and a Protein G step. By rapidly evaluating the attractiveness of options, the methodology facilitates efficient and cost-effective process development.

A new index of flat breaststroke propulsion: a comparison of elite men and women.

PubMed

Seifert, L; Chollet, D

2005-03-01

This study examined arm and leg coordination and propulsion during the flat breaststroke in nine elite male and eight elite female swimmers over three race paces (200 m, 100 m and 50 m). Coordination was expressed using four temporal gaps (T1, T2, T3, T4), which described the continuity between the propulsive phases of the limbs, as recorded on a video device (50 Hz). Glide duration was denoted T1, the time between the beginning of arm and leg recovery was denoted T2, the time between the end of arm and the leg recovery was denoted T3, and the time between 90 degrees of flexion during arm recovery and 90 degrees during leg recovery was denoted T4. Using these temporal gaps, four stroke phases (propulsion, glide, recovery and leg insweep) could be followed over a complete arm and leg stroke. The total duration of arm and leg propulsion was assessed by a new index of flat breaststroke propulsion (IFBP). Velocity, stroke rate and stroke length were also calculated for each pace. The elite swimmers showed short T2, T3 and T4; moreover, T1 decreased when the pace increased. Expertise in the flat breaststroke was thus characterized by synchronized arm and leg recoveries and increased continuity in the arm and leg propulsions with increasing velocity. Differences between the sexes in the spatio-temporal parameters were possibly due to anthropometric differences (the men were heavier, older and taller than the women) and different motor organization linked to arm and leg coordination (shorter T3, body glide and body recovery, and greater body propulsion and higher IFBP in the men). The men's propulsive actions showed greater continuity, particularly in the sprint. The best men adopted a superposition coordination and thus had the ability to overcome very great active drag. Temporal gap measurement and the IFBP are practical indicators of arm and leg coordination and propulsion that can be exploited by coaches and swimmers to increase the continuity between propulsive actions during the flat breaststroke.

Technologies and practices for maintaining and publishing earth science vocabularies

NASA Astrophysics Data System (ADS)

Cox, Simon; Yu, Jonathan; Williams, Megan; Giabardo, Fabrizio; Lowe, Dominic

2015-04-01

Shared vocabularies are a key element in geoscience data interoperability. Many organizations curate vocabularies, with most Geologic Surveys having a long history of development of lexicons and authority tables. However, their mode of publication is heterogeneous, ranging from PDFs and HTML web pages, spreadsheets and CSV, through various user-interfaces, and public and private APIs. Content maintenance ranges from tightly-governed and externally opaque, through various community processes, all the way to crowd-sourcing ('folksonomies'). Meanwhile, there is an increasing expectation of greater harmonization and vocabulary re-use, which create requirements for standardized content formalization and APIs, along with transparent content maintenance and versioning. We have been trialling a combination of processes and software dealing with vocabulary formalization, registration, search and linking. We use the Simplified Knowledge Organization System (SKOS) to provide a generic interface to content. SKOS is an RDF technology for multi-lingual, hierarchical vocabularies, oriented around 'concepts' denoted by URIs, and thus consistent with Linked Open Data. SKOS may be mixed in with classes and properties from specialized ontologies which provide a more specific interface when required. We have developed a suite of practices and techniques for conversion of content from the source technologies and styles into SKOS, largely based on spreadsheet manipulation before RDF conversion, and SPARQL afterwards. The workflow for each vocabulary must be adapted to match the specific inputs. In linked data applications, two requirements are paramount for user confidence: (i) the URI that denotes a vocabulary item is persistent, and should be dereferenceable indefinitely; (ii) the history and status of the resource denoted by a URI must be available. This is implemented by the Linked Data Registry (LDR), originally developed for the World Meteorological Organization and the UK Environment Agency, and now adapted and enhanced for deployment by CSIRO and the Australian Bureau of Meteorology. The LDR applies a standard content registration paradigm to RDF data, also including a delegation mode that enables a system to register (endorse) externally managed content. The locally managed RDF is exposed on a SPARQL endpoint. The registry implementation enables a flexible interaction pattern to support various specific content publication workflows, with the key feature of making the content externally accessible through a standard interface alongside its history, previous versions, and status. SPARQL is the standard low-level API for RDF including SKOS. On top of this we have developed SISSvoc, a SKOS-based RESTful API. This has been used it to deploy a number of vocabularies on behalf of the IUGS, ICS, NERC, OGC, the Australian Government, and CSIRO projects. Applications like SISSvoc Search provide a simple search UI on top of one or more SISSvoc sources. Together, these components provide a powerful and flexible system for providing earth science vocabularies for the community, consistent with semantic web and linked-data principles.

Currently available methodologies for the processing of intravascular ultrasound and optical coherence tomography images.

PubMed

Athanasiou, Lambros; Sakellarios, Antonis I; Bourantas, Christos V; Tsirka, Georgia; Siogkas, Panagiotis; Exarchos, Themis P; Naka, Katerina K; Michalis, Lampros K; Fotiadis, Dimitrios I

2014-07-01

Optical coherence tomography and intravascular ultrasound are the most widely used methodologies in clinical practice as they provide high resolution cross-sectional images that allow comprehensive visualization of the lumen and plaque morphology. Several methods have been developed in recent years to process the output of these imaging modalities, which allow fast, reliable and reproducible detection of the luminal borders and characterization of plaque composition. These methods have proven useful in the study of the atherosclerotic process as they have facilitated analysis of a vast amount of data. This review presents currently available intravascular ultrasound and optical coherence tomography processing methodologies for segmenting and characterizing the plaque area, highlighting their advantages and disadvantages, and discusses the future trends in intravascular imaging.

A Novel Methodology for Improving Plant Pest Surveillance in Vineyards and Crops Using UAV-Based Hyperspectral and Spatial Data

PubMed Central

Vanegas, Fernando; Weiss, John; Gonzalez, Felipe

2018-01-01

Recent advances in remote sensed imagery and geospatial image processing using unmanned aerial vehicles (UAVs) have enabled the rapid and ongoing development of monitoring tools for crop management and the detection/surveillance of insect pests. This paper describes a (UAV) remote sensing-based methodology to increase the efficiency of existing surveillance practices (human inspectors and insect traps) for detecting pest infestations (e.g., grape phylloxera in vineyards). The methodology uses a UAV integrated with advanced digital hyperspectral, multispectral, and RGB sensors. We implemented the methodology for the development of a predictive model for phylloxera detection. In this method, we explore the combination of airborne RGB, multispectral, and hyperspectral imagery with ground-based data at two separate time periods and under different levels of phylloxera infestation. We describe the technology used—the sensors, the UAV, and the flight operations—the processing workflow of the datasets from each imagery type, and the methods for combining multiple airborne with ground-based datasets. Finally, we present relevant results of correlation between the different processed datasets. The objective of this research is to develop a novel methodology for collecting, processing, analysing and integrating multispectral, hyperspectral, ground and spatial data to remote sense different variables in different applications, such as, in this case, plant pest surveillance. The development of such methodology would provide researchers, agronomists, and UAV practitioners reliable data collection protocols and methods to achieve faster processing techniques and integrate multiple sources of data in diverse remote sensing applications. PMID:29342101

A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

ERIC Educational Resources Information Center

De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

2015-01-01

Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

Meta-analysis of cancer gene expression signatures reveals new cancer genes, SAGE tags and tumor associated regions of co-regulation

PubMed Central

Kavak, Erşen; Ünlü, Mustafa; Nistér, Monica; Koman, Ahmet

2010-01-01

Cancer is among the major causes of human death and its mechanism(s) are not fully understood. We applied a novel meta-analysis approach to multiple sets of merged serial analysis of gene expression and microarray cancer data in order to analyze transcriptome alterations in human cancer. Our methodology, which we denote ‘COgnate Gene Expression patterNing in tumours’ (COGENT), unmasked numerous genes that were differentially expressed in multiple cancers. COGENT detected well-known tumor-associated (TA) genes such as TP53, EGFR and VEGF, as well as many multi-cancer, but not-yet-tumor-associated genes. In addition, we identified 81 co-regulated regions on the human genome (RIDGEs) by using expression data from all cancers. Some RIDGEs (28%) consist of paralog genes while another subset (30%) are specifically dysregulated in tumors but not in normal tissues. Furthermore, a significant number of RIDGEs are associated with GC-rich regions on the genome. All assembled data is freely available online (www.oncoreveal.org) as a tool implementing COGENT analysis of multi-cancer genes and RIDGEs. These findings engender a deeper understanding of cancer biology by demonstrating the existence of a pool of under-studied multi-cancer genes and by highlighting the cancer-specificity of some TA-RIDGEs. PMID:20621981

The Relationship Between Executive Functions and Language Abilities in Children: A Latent Variables Approach

PubMed Central

Park, Ji Sook; Gangopadhyay, Ishanti; Davidson, Meghan M.; Weismer, Susan Ellis

2017-01-01

Purpose We aimed to outline the latent variables approach for measuring nonverbal executive function (EF) skills in school-age children, and to examine the relationship between nonverbal EF skills and language performance in this age group. Method Seventy-one typically developing children, ages 8 through 11, participated in the study. Three EF components, inhibition, updating, and task-shifting, were each indexed using 2 nonverbal tasks. A latent variables approach was used to extract latent scores that represented each EF construct. Children were also administered common standardized language measures. Multiple regression analyses were conducted to examine the relationship between EF and language skills. Results Nonverbal updating was associated with the Receptive Language Index on the Clinical Evaluation of Language Fundamentals–Fourth Edition (CELF-4). When composites denoting lexical–semantic and syntactic abilities were derived, nonverbal inhibition (but not shifting or updating) was found to predict children's syntactic abilities. These relationships held when the effects of age, IQ, and socioeconomic status were controlled. Conclusions The study makes a methodological contribution by explicating a method by which researchers can use the latent variables approach when measuring EF performance in school-age children. The study makes a theoretical and a clinical contribution by suggesting that language performance may be related to domain-general EFs. PMID:28306755

On the Impact of Anomalous Noise Events on Road Traffic Noise Mapping in Urban and Suburban Environments.

PubMed

Orga, Ferran; Alías, Francesc; Alsina-Pagès, Rosa Ma

2017-12-23

Noise pollution is a critical factor affecting public health, the relationship between road traffic noise (RTN) and several diseases in urban areas being especially disturbing. The Environmental Noise Directive 2002/49/EC and the CNOSSOS-EU framework are the main instruments of the European Union to identify and combat noise pollution, requiring Member States to compose and publish noise maps and noise management action plans every five years. Nowadays, the noise maps are starting to be tailored by means of Wireless Acoustic Sensor Networks (WASN). In order to exclusively monitor the impact of RTN on the well-being of citizens through WASN-based approaches, those noise sources unrelated to RTN denoted as Anomalous Noise Events (ANEs) should be removed from the noise map generation. This paper introduces an analysis methodology considering both Signal-to-Noise Ratio (SNR) and duration of ANEs to evaluate their impact on the A-weighted equivalent RTN level calculation for different integration times. The experiments conducted on 9 h of real-life data from the WASN-based DYNAMAP project show that both individual high-impact events and aggregated medium-impact events bias significantly the equivalent noise levels of the RTN map, making any derived study about public health impact inaccurate.

Discrimination of Dynamic Tactile Contact by Temporally Precise Event Sensing in Spiking Neuromorphic Networks

PubMed Central

Lee, Wang Wei; Kukreja, Sunil L.; Thakor, Nitish V.

2017-01-01

This paper presents a neuromorphic tactile encoding methodology that utilizes a temporally precise event-based representation of sensory signals. We introduce a novel concept where touch signals are characterized as patterns of millisecond precise binary events to denote pressure changes. This approach is amenable to a sparse signal representation and enables the extraction of relevant features from thousands of sensing elements with sub-millisecond temporal precision. We also proposed measures adopted from computational neuroscience to study the information content within the spiking representations of artificial tactile signals. Implemented on a state-of-the-art 4096 element tactile sensor array with 5.2 kHz sampling frequency, we demonstrate the classification of transient impact events while utilizing 20 times less communication bandwidth compared to frame based representations. Spiking sensor responses to a large library of contact conditions were also synthesized using finite element simulations, illustrating an 8-fold improvement in information content and a 4-fold reduction in classification latency when millisecond-precise temporal structures are available. Our research represents a significant advance, demonstrating that a neuromorphic spatiotemporal representation of touch is well suited to rapid identification of critical contact events, making it suitable for dynamic tactile sensing in robotic and prosthetic applications. PMID:28197065

Ecological and physiological thermal niches to understand distribution of Chagas disease vectors in Latin America.

PubMed

DE LA Vega, G J; Schilman, P E

2018-03-01

In order to assess how triatomines (Hemiptera, Reduviidae), Chagas disease vectors, are distributed through Latin America, we analysed the relationship between the ecological niche and the limits of the physiological thermal niche in seven species of triatomines. We combined two methodological approaches: species distribution models, and physiological tolerances. First, we modelled the ecological niche and identified the most important abiotic factor for their distribution. Then, thermal tolerance limits were analysed by measuring maximum and minimum critical temperatures, upper lethal temperature, and 'chill-coma recovery time'. Finally, we used phylogenetic independent contrasts to analyse the link between limiting factors and the thermal tolerance range for the assessment of ecological hypotheses that provide a different outlook for the geo-epidemiology of Chagas disease. In triatomines, thermo-tolerance range increases with increasing latitude mainly due to better cold tolerances, suggesting an effect of thermal selection. In turn, physiological analyses show that species reaching southernmost areas have a higher thermo-tolerance than those with tropical distributions, denoting that thermo-tolerance is limiting the southern distribution. Understanding the latitudinal range along its physiological limits of disease vectors may prove useful to test ecological hypotheses and improve strategies and efficiency of vector control at the local and regional levels. © 2017 The Royal Entomological Society.

State reference design and saturated control of doubly-fed induction generators under voltage dips

NASA Astrophysics Data System (ADS)

Tilli, Andrea; Conficoni, Christian; Hashemi, Ahmad

2017-04-01

In this paper, the stator/rotor currents control problem of doubly-fed induction generator under faulty line voltage is carried out. Common grid faults cause a steep decline in the line voltage profile, commonly denoted as voltage dip. This point is critical for such kind of machines, having their stator windings directly connected to the grid. In this respect, solid methodological nonlinear control theory arguments are exploited and applied to design a novel controller, whose main goal is to improve the system behaviour during voltage dips, endowing it with low voltage ride through capability, a fundamental feature required by modern Grid Codes. The proposed solution exploits both feedforward and feedback actions. The feedforward part relies on suitable reference trajectories for the system internal dynamics, which are designed to prevent large oscillations in the rotor currents and command voltages, excited by line perturbations. The feedback part uses state measurements and is designed according to Linear Matrix Inequalities (LMI) based saturated control techniques to further reduce oscillations, while explicitly accounting for the system constraints. Numerical simulations verify the benefits of the internal dynamics trajectory planning, and the saturated state feedback action, in crucially improving the Doubly-Fed Induction Machine response under severe grid faults.

The Relationship Between Executive Functions and Language Abilities in Children: A Latent Variables Approach.

PubMed

Kaushanskaya, Margarita; Park, Ji Sook; Gangopadhyay, Ishanti; Davidson, Meghan M; Weismer, Susan Ellis

2017-04-14

We aimed to outline the latent variables approach for measuring nonverbal executive function (EF) skills in school-age children, and to examine the relationship between nonverbal EF skills and language performance in this age group. Seventy-one typically developing children, ages 8 through 11, participated in the study. Three EF components, inhibition, updating, and task-shifting, were each indexed using 2 nonverbal tasks. A latent variables approach was used to extract latent scores that represented each EF construct. Children were also administered common standardized language measures. Multiple regression analyses were conducted to examine the relationship between EF and language skills. Nonverbal updating was associated with the Receptive Language Index on the Clinical Evaluation of Language Fundamentals-Fourth Edition (CELF-4). When composites denoting lexical-semantic and syntactic abilities were derived, nonverbal inhibition (but not shifting or updating) was found to predict children's syntactic abilities. These relationships held when the effects of age, IQ, and socioeconomic status were controlled. The study makes a methodological contribution by explicating a method by which researchers can use the latent variables approach when measuring EF performance in school-age children. The study makes a theoretical and a clinical contribution by suggesting that language performance may be related to domain-general EFs.

Retarded ejaculation in men: an overview of psychological and neurobiological insights.

PubMed

Waldinger, Marcel D; Schweitzer, Dave H

2005-06-01

Disorders of orgasm and ejaculation are erroneously mixed up in the DSM-IV classification system. Male Orgasmic Disorder to denote "delayed ejaculation" is inadequate as orgasm and ejaculation represent clinical expressions of different neurobiological phenomena. Unfortunately, the DSM-IV criteria for delayed ejaculation were accepted regardless of any research with appropriate methodology and design. The psychological approach and associated psychotherapy to solve this problem is rather disappointing. The neurobiological approach, which started with animal studies, has demonstrated various neurotransmitters with the potency to inhibit ejaculation. Indeed, several experimental drugs have been tested in rats, showing the successful acceleration of ejaculation. We propose that human research should start with the development of an operational definition of delayed ejaculation. To achieve this goal, we propose unselected epidemiological stopwatch studies which also provide information on the prevalence and incidence of delayed ejaculation in men. Currently, no effective and safe drugs are available to accelerate ejaculation time in men. The best way to treat lifelong delayed ejaculation is, thus far, to inform the patients about biological and psychological inhibiting factors which they need to avoid, and to remain critical about unrealistic expectations from psychotherapy. Psychotherapy may be useful in subgroups, particularly in the absence of effective and safe drugs.

On the Impact of Anomalous Noise Events on Road Traffic Noise Mapping in Urban and Suburban Environments

PubMed Central

2017-01-01

Noise pollution is a critical factor affecting public health, the relationship between road traffic noise (RTN) and several diseases in urban areas being especially disturbing. The Environmental Noise Directive 2002/49/EC and the CNOSSOS-EU framework are the main instruments of the European Union to identify and combat noise pollution, requiring Member States to compose and publish noise maps and noise management action plans every five years. Nowadays, the noise maps are starting to be tailored by means of Wireless Acoustic Sensor Networks (WASN). In order to exclusively monitor the impact of RTN on the well-being of citizens through WASN-based approaches, those noise sources unrelated to RTN denoted as Anomalous Noise Events (ANEs) should be removed from the noise map generation. This paper introduces an analysis methodology considering both Signal-to-Noise Ratio (SNR) and duration of ANEs to evaluate their impact on the A-weighted equivalent RTN level calculation for different integration times. The experiments conducted on 9 h of real-life data from the WASN-based DYNAMAP project show that both individual high-impact events and aggregated medium-impact events bias significantly the equivalent noise levels of the RTN map, making any derived study about public health impact inaccurate. PMID:29295492

Assessment of multiple constructs of social integration for older adults living in nursing homes.

PubMed

Leedahl, Skye N; Sellon, Alicia; Chapin, Rosemary K

2018-07-01

A variety of terms and measures have been used in the literature to denote being socially integrated, and many studies of older adults focus on only social networks or social support and often only include those living in the community. The purpose of this study was to assess multiple constructs of social integration (i.e., social networks, social capital, social support, and social engagement) for older adults in nursing homes. Data were collected from 140 older adults at 30 nursing homes in Kansas. We interviewed older adults' in-person using a survey questionnaire, and used multilevel confirmatory factor analysis to analyze the data. The final model that included the four constructs had acceptable fit (χ 2  = 174.71; df = 112; p < .01; CFI = .93; RMSEA = .06; SRMR-W = .06; SRMR-B = .12). The results showed that the proposed model was supported at the individual level. At the between-level, social networks and social support were supported. Study results have methodological and practice/policy implications for the study of older adults in long term care settings. In particular, this study contributes to understanding how to operationally define and differentiate social integration variables in studies of older adults, particularly when study data are hierarchical.

Extracting a mix parameter from 2D radiography of variable density flow

NASA Astrophysics Data System (ADS)

Kurien, Susan; Doss, Forrest; Livescu, Daniel

2017-11-01

A methodology is presented for extracting quantities related to the statistical description of the mixing state from the 2D radiographic image of a flow. X-ray attenuation through a target flow is given by the Beer-Lambert law which exponentially damps the incident beam intensity by a factor proportional to the density, opacity and thickness of the target. By making reasonable assumptions for the mean density, opacity and effective thickness of the target flow, we estimate the contribution of density fluctuations to the attenuation. The fluctuations thus inferred may be used to form the correlation of density and specific-volume, averaged across the thickness of the flow in the direction of the beam. This correlation function, denoted by b in RANS modeling, quantifies turbulent mixing in variable density flows. The scheme is tested using DNS data computed for variable-density buoyancy-driven mixing. We quantify the deficits in the extracted value of b due to target thickness, Atwood number, and modeled noise in the incident beam. This analysis corroborates the proposed scheme to infer the mix parameter from thin targets at moderate to low Atwood numbers. The scheme is then applied to an image of counter-shear flow obtained from experiments at the National Ignition Facility. US Department of Energy.

Cognitive Load and Listening Effort: Concepts and Age-Related Considerations.

PubMed

Lemke, Ulrike; Besser, Jana

2016-01-01

Listening effort has been recognized as an important dimension of everyday listening, especially with regard to the comprehension of spoken language. At constant levels of comprehension performance, the level of effort exerted and perceived during listening can differ considerably across listeners and situations. In this article, listening effort is used as an umbrella term for two different types of effort that can arise during listening. One of these types is processing effort, which is used to denote the utilization of "extra" mental processing resources in listening conditions that are adverse for an individual. A conceptual description is introduced how processing effort could be defined in terms of situational influences, the listener's auditory and cognitive resources, and the listener's personal state. Also, the proposed relationship between processing effort and subjectively perceived listening effort is discussed. Notably, previous research has shown that the availability of mental resources, as well as the ability to use them efficiently, changes over the course of adult aging. These common age-related changes in cognitive abilities and their neurocognitive organization are discussed in the context of the presented concept, especially regarding situations in which listening effort may be increased for older people.

A Design Methodology for Medical Processes.

PubMed

Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

2016-01-01

Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

Do Italian Companies Manage Work-Related Stress Effectively? A Process Evaluation in Implementing the INAIL Methodology

PubMed Central

Di Tecco, Cristina; Ronchetti, Matteo; Ghelli, Monica; Russo, Simone; Persechino, Benedetta

2015-01-01

Studies on Intervention Process Evaluation are attracting growing attention in the literature on interventions linked to stress and the wellbeing of workers. There is evidence that some elements relating to the process and content of an intervention may have a decisive role in implementing it by facilitating or hindering the effectiveness of the results. This study aimed to provide a process evaluation on interventions to assess and manage risks related to work-related stress using a methodological path offered by INAIL. The final sample is composed of 124 companies participating to an interview on aspects relating to each phase of the INAIL methodological path put in place to implement the intervention. INAIL methodology has been defined as useful in the process of assessing and managing the risks related to work-related stress. Some factors related to the process (e.g., implementation of a preliminary phase, workers' involvement, and use of external consultants) showed a role in significant differences that emerged in the levels of risk, particularly in relation to findings from the preliminary assessment. Main findings provide information on the key aspects of process and content that are useful in implementing an intervention for assessing and managing risks related to work-related stress. PMID:26504788

Do Italian Companies Manage Work-Related Stress Effectively? A Process Evaluation in Implementing the INAIL Methodology.

PubMed

Di Tecco, Cristina; Ronchetti, Matteo; Ghelli, Monica; Russo, Simone; Persechino, Benedetta; Iavicoli, Sergio

2015-01-01

Studies on Intervention Process Evaluation are attracting growing attention in the literature on interventions linked to stress and the wellbeing of workers. There is evidence that some elements relating to the process and content of an intervention may have a decisive role in implementing it by facilitating or hindering the effectiveness of the results. This study aimed to provide a process evaluation on interventions to assess and manage risks related to work-related stress using a methodological path offered by INAIL. The final sample is composed of 124 companies participating to an interview on aspects relating to each phase of the INAIL methodological path put in place to implement the intervention. INAIL methodology has been defined as useful in the process of assessing and managing the risks related to work-related stress. Some factors related to the process (e.g., implementation of a preliminary phase, workers' involvement, and use of external consultants) showed a role in significant differences that emerged in the levels of risk, particularly in relation to findings from the preliminary assessment. Main findings provide information on the key aspects of process and content that are useful in implementing an intervention for assessing and managing risks related to work-related stress.

7 CFR 301.75-1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... nursery stock maintained in climate-controlled greenhouses in 4-or 6-inch diameter pots until it is sold... ditch, hedgerow, open space, or sign or marker denoting change of fruit variety. Infected. Containing...

7 CFR 301.75-1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... nursery stock maintained in climate-controlled greenhouses in 4-or 6-inch diameter pots until it is sold... ditch, hedgerow, open space, or sign or marker denoting change of fruit variety. Infected. Containing...

Environmental Risk Assessment of dredging processes - application to Marin harbour (NW Spain)

NASA Astrophysics Data System (ADS)

Gómez, A. G.; García Alba, J.; Puente, A.; Juanes, J. A.

2014-04-01

A methodological procedure to estimate the environmental risk of dredging operations in aquatic systems has been developed. Environmental risk estimations are based on numerical models results, which provide an appropriated spatio-temporal framework analysis to guarantee an effective decision-making process. The methodological procedure has been applied on a real dredging operation in the port of Marin (NW Spain). Results from Marin harbour confirmed the suitability of the developed methodology and the conceptual approaches as a comprehensive and practical management tool.

Another Breakthrough, Another Baby Thrown out with the Bathwater

ERIC Educational Resources Information Center

Bell, David M.

2009-01-01

"Process-oriented pedagogy: facilitation, empowerment, or control?" claims that process-oriented pedagogy (POP) represents the methodological perspective of most practising teachers and that outcomes-based education (OBE) poses a real and present danger to stakeholder autonomy. Whereas POP may characterize methodological practices in the inner…

A POLLUTION REDUCTION METHODOLOGY FOR CHEMICAL PROCESS SIMULATORS

EPA Science Inventory

A pollution minimization methodology was developed for chemical process design using computer simulation. It is based on a pollution balance that at steady state is used to define a pollution index with units of mass of pollution per mass of products. The pollution balance has be...

Methodology for assessing the effectiveness of access management techniques : executive summary.

DOT National Transportation Integrated Search

1998-09-14

A methodology for assessing the effectiveness of access management techniques on suburban arterial highways is developed. The methodology is described as a seven-step process as follows: (1) establish the purpose of the analysis (2) establish the mea...

How to convince your manager to invest in an HIS preimplementation methodology for appraisal of material, process and human costs and benefits.

PubMed Central

Bossard, B.; Renard, J. M.; Capelle, P.; Paradis, P.; Beuscart, M. C.

2000-01-01

Investing in information technology has become a crucial process in hospital management today. Medical and administrative managers are faced with difficulties in measuring medical information technology costs and benefits due to the complexity of the domain. This paper proposes a preimplementation methodology for evaluating and appraising material, process and human costs and benefits. Based on the users needs and organizational process analysis, the methodology provides an evaluative set of financial and non financial indicators which can be integrated in a decision making and investment evaluation process. We describe the first results obtained after a few months of operation for the Computer-Based Patient Record (CPR) project. Its full acceptance, in spite of some difficulties, encourages us to diffuse the method for the entire project. PMID:11079851

A Framework for Preliminary Design of Aircraft Structures Based on Process Information. Part 1

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1998-01-01

This report discusses the general framework and development of a computational tool for preliminary design of aircraft structures based on process information. The described methodology is suitable for multidisciplinary design optimization (MDO) activities associated with integrated product and process development (IPPD). The framework consists of three parts: (1) product and process definitions; (2) engineering synthesis, and (3) optimization. The product and process definitions are part of input information provided by the design team. The backbone of the system is its ability to analyze a given structural design for performance as well as manufacturability and cost assessment. The system uses a database on material systems and manufacturing processes. Based on the identified set of design variables and an objective function, the system is capable of performing optimization subject to manufacturability, cost, and performance constraints. The accuracy of the manufacturability measures and cost models discussed here depend largely on the available data on specific methods of manufacture and assembly and associated labor requirements. As such, our focus in this research has been on the methodology itself and not so much on its accurate implementation in an industrial setting. A three-tier approach is presented for an IPPD-MDO based design of aircraft structures. The variable-complexity cost estimation methodology and an approach for integrating manufacturing cost assessment into design process are also discussed. This report is presented in two parts. In the first part, the design methodology is presented, and the computational design tool is described. In the second part, a prototype model of the preliminary design Tool for Aircraft Structures based on Process Information (TASPI) is described. Part two also contains an example problem that applies the methodology described here for evaluation of six different design concepts for a wing spar.

Combined Mitochondrial and Nuclear Markers Revealed a Deep Vicariant History for Leopoldamys neilli, a Cave-Dwelling Rodent of Thailand

PubMed Central

Latinne, Alice; Waengsothorn, Surachit; Rojanadilok, Prateep; Eiamampai, Krairat; Sribuarod, Kriangsak; Michaux, Johan R.

2012-01-01

Background Historical biogeography and evolutionary processes of cave taxa have been widely studied in temperate regions. However, Southeast Asian cave ecosystems remain largely unexplored despite their high scientific interest. Here we studied the phylogeography of Leopoldamys neilli, a cave-dwelling murine rodent living in limestone karsts of Thailand, and compared the molecular signature of mitochondrial and nuclear markers. Methodology/Principal Findings We used a large sampling (n = 225) from 28 localities in Thailand and a combination of mitochondrial and nuclear markers with various evolutionary rates (two intronic regions and 12 microsatellites). The evolutionary history of L. neilli and the relative role of vicariance and dispersal were investigated using ancestral range reconstruction analysis and Approximate Bayesian computation (ABC). Both mitochondrial and nuclear markers support a large-scale population structure of four main groups (west, centre, north and northeast) and a strong finer structure within each of these groups. A deep genealogical divergence among geographically close lineages is observed and denotes a high population fragmentation. Our findings suggest that the current phylogeographic pattern of this species results from the fragmentation of a widespread ancestral population and that vicariance has played a significant role in the evolutionary history of L. neilli. These deep vicariant events that occurred during Plio-Pleistocene are related to the formation of the Central Plain of Thailand. Consequently, the western, central, northern and northeastern groups of populations were historically isolated and should be considered as four distinct Evolutionarily Significant Units (ESUs). Conclusions/Significance Our study confirms the benefit of using several independent genetic markers to obtain a comprehensive and reliable picture of L. neilli evolutionary history at different levels of resolution. The complex genetic structure of Leopoldamys neilli is supported by congruent mitochondrial and nuclear markers and has been influenced by the geological history of Thailand during Plio-Pleistocene. PMID:23118888

The clustering of galaxies in the completed SDSS-III Baryon Oscillation Spectroscopic Survey: towards a computationally efficient analysis without informative priors

NASA Astrophysics Data System (ADS)

Pellejero-Ibanez, Marcos; Chuang, Chia-Hsun; Rubiño-Martín, J. A.; Cuesta, Antonio J.; Wang, Yuting; Zhao, Gongbo; Ross, Ashley J.; Rodríguez-Torres, Sergio; Prada, Francisco; Slosar, Anže; Vazquez, Jose A.; Alam, Shadab; Beutler, Florian; Eisenstein, Daniel J.; Gil-Marín, Héctor; Grieb, Jan Niklas; Ho, Shirley; Kitaura, Francisco-Shu; Percival, Will J.; Rossi, Graziano; Salazar-Albornoz, Salvador; Samushia, Lado; Sánchez, Ariel G.; Satpathy, Siddharth; Seo, Hee-Jong; Tinker, Jeremy L.; Tojeiro, Rita; Vargas-Magaña, Mariana; Brownstein, Joel R.; Nichol, Robert C.; Olmstead, Matthew D.

2017-07-01

We develop a new computationally efficient methodology called double-probe analysis with the aim of minimizing informative priors (those coming from extra probes) in the estimation of cosmological parameters. Using our new methodology, we extract the dark energy model-independent cosmological constraints from the joint data sets of the Baryon Oscillation Spectroscopic Survey (BOSS) galaxy sample and Planck cosmic microwave background (CMB) measurements. We measure the mean values and covariance matrix of {R, la, Ωbh2, ns, log(As), Ωk, H(z), DA(z), f(z)σ8(z)}, which give an efficient summary of the Planck data and two-point statistics from the BOSS galaxy sample. The CMB shift parameters are R=√{Ω _m H_0^2} r(z_*) and la = πr(z*)/rs(z*), where z* is the redshift at the last scattering surface, and r(z*) and rs(z*) denote our comoving distance to the z* and sound horizon at z*, respectively; Ωb is the baryon fraction at z = 0. This approximate methodology guarantees that we will not need to put informative priors on the cosmological parameters that galaxy clustering is unable to constrain, I.e. Ωbh2 and ns. The main advantage is that the computational time required for extracting these parameters is decreased by a factor of 60 with respect to exact full-likelihood analyses. The results obtained show no tension with the flat Λ cold dark matter (ΛCDM) cosmological paradigm. By comparing with the full-likelihood exact analysis with fixed dark energy models, on one hand we demonstrate that the double-probe method provides robust cosmological parameter constraints that can be conveniently used to study dark energy models, and on the other hand we provide a reliable set of measurements assuming dark energy models to be used, for example, in distance estimations. We extend our study to measure the sum of the neutrino mass using different methodologies, including double-probe analysis (introduced in this study), full-likelihood analysis and single-probe analysis. From full-likelihood analysis, we obtain Σmν < 0.12 (68 per cent), assuming ΛCDM and Σmν < 0.20 (68 per cent) assuming owCDM. We also find that there is degeneracy between observational systematics and neutrino masses, which suggests that one should take great care when estimating these parameters in the case of not having control over the systematics of a given sample.

An approach to quantitative sustainability assessment in the early stages of process design.

PubMed

Tugnoli, Alessandro; Santarelli, Francesco; Cozzani, Valerio

2008-06-15

A procedure was developed for the quantitative assessment of key performance indicators suitable for the sustainability analysis of alternative processes, mainly addressing the early stages of process design. The methodology was based on the calculation of a set of normalized impact indices allowing a direct comparison of the additional burden of each process alternative on a selected reference area. Innovative reference criteria were developed to compare and aggregate the impact indicators on the basis of the site-specific impact burden and sustainability policy. An aggregation procedure also allows the calculation of overall sustainability performance indicators and of an "impact fingerprint" of each process alternative. The final aim of the method is to support the decision making process during process development, providing a straightforward assessment of the expected sustainability performances. The application of the methodology to case studies concerning alternative waste disposal processes allowed a preliminary screening of the expected critical sustainability impacts of each process. The methodology was shown to provide useful results to address sustainability issues in the early stages of process design.

IPAD project overview

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace-Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of technology and associated software for integrated company-wide management of engineering information. The project has been underway since 1976 under the guidance of an Industry Technical Advisory Board (ITAB) composed of representatives of major engineering and computer companies and in close collaboration with the Air Force Integrated Computer-Aided Manufacturing (ICAM) program. Results to date on the IPAD project include an in-depth documentation of a representative design process for a large engineering project, the definition and design of computer-aided design software needed to support that process, and the release of prototype software to integrate selected design functions. Ongoing work concentrates on development of prototype software to manage engineering information, and initial software is nearing release.

Technical support for creating an artificial intelligence system for feature extraction and experimental design

NASA Technical Reports Server (NTRS)

Glick, B. J.

1985-01-01

Techniques for classifying objects into groups or clases go under many different names including, most commonly, cluster analysis. Mathematically, the general problem is to find a best mapping of objects into an index set consisting of class identifiers. When an a priori grouping of objects exists, the process of deriving the classification rules from samples of classified objects is known as discrimination. When such rules are applied to objects of unknown class, the process is denoted classification. The specific problem addressed involves the group classification of a set of objects that are each associated with a series of measurements (ratio, interval, ordinal, or nominal levels of measurement). Each measurement produces one variable in a multidimensional variable space. Cluster analysis techniques are reviewed and methods for incuding geographic location, distance measures, and spatial pattern (distribution) as parameters in clustering are examined. For the case of patterning, measures of spatial autocorrelation are discussed in terms of the kind of data (nominal, ordinal, or interval scaled) to which they may be applied.

A best on-line algorithm for single machine scheduling the equal length jobs with the special chain precedence and delivery time

NASA Astrophysics Data System (ADS)

Gu, Cunchang; Mu, Yundong

2013-03-01

In this paper, we consider a single machine on-line scheduling problem with the special chains precedence and delivery time. All jobs arrive over time. The chains chainsi arrive at time ri , it is known that the processing and delivery time of each job on the chain satisfy one special condition CD a forehand: if the job J(i)j is the predecessor of the job J(i)k on the chain chaini, then they satisfy p(i)j = p(i)k = p >= qj >= qk , i = 1,2, ---,n , where pj and qj denote the processing time and the delivery time of the job Jj respectively. Obviously, if the arrival jobs have no chains precedence, it shows that the length of the corresponding chain is 1. The objective is to minimize the time by which all jobs have been delivered. We provide an on-line algorithm with a competitive ratio of √2 , and the result is the best possible.

Effect of processing on physicochemical characteristics and bioefficacy of β-lactoglobulin-epigallocatechin-3-gallate complexes.

PubMed

Lestringant, Pauline; Guri, Anilda; Gülseren, Ibrahim; Relkin, Perla; Corredig, Milena

2014-08-20

Varying amounts of epigallocatechin-3-gallate (EGCG) were encapsulated in β-lactoglobulin (β-Lg) nanoparticles, either native or processed, denoted as heated or desolvated protein. The stability, physical properties, and bioactivity of the β-Lg-EGCG complexes were tested. Native β-Lg-EGCG complexes showed comparable stability and binding efficacy (EGCG/β-Lg molar ratio of 1:1) to heated β-Lg nanoparticles (1% and 5% protein w/w). The sizes of heated and desolvated β-Lg nanoparticles were comparable, but the latter showed the highest binding affinity for EGCG. The presence of EGCG complexed with β-Lg did not affect the interfacial tension of the protein when tested at the soy oil-water interface but caused a decrease in dilational elasticity. All β-Lg complexes (native, heated, or desolvated) showed a decrease in cellular proliferation similar to that of free ECGC. In summary, protein-EGCG complexes did not alter the bioefficacy of EGCG and contributed to increased stability with storage, demonstrating the potential benefits of nanoencapsulation.

An explanatory heuristic gives rise to the belief that words are well suited for their referents.

PubMed

Sutherland, Shelbie L; Cimpian, Andrei

2015-10-01

The mappings between the words of a language and their meanings are arbitrary. There is, for example, nothing inherently dog-like about the word dog. And yet, building on prior evidence (e.g., Brook, 1970; Piaget, 1967), the six studies reported here (N=1062) suggest that both children and (at least to some extent) adults see a special "fit" between objects and their names, as if names were particularly suitable or appropriate for the objects they denote. These studies also provide evidence for a novel proposal concerning the source of these nominal fit beliefs. Specifically, beliefs about nominal fit may be a byproduct of the heuristic processes that people use to make sense of the world more generally (Cimpian & Salomon, 2014a). In sum, the present studies provide new insights into how people conceive of language and demonstrate that these conceptions are rooted in the processes that underlie broader explanatory reasoning. Copyright © 2015 Elsevier B.V. All rights reserved.

Spatial-temporal-covariance-based modeling, analysis, and simulation of aero-optics wavefront aberrations.

PubMed

Vogel, Curtis R; Tyler, Glenn A; Wittich, Donald J

2014-07-01

We introduce a framework for modeling, analysis, and simulation of aero-optics wavefront aberrations that is based on spatial-temporal covariance matrices extracted from wavefront sensor measurements. Within this framework, we present a quasi-homogeneous structure function to analyze nonhomogeneous, mildly anisotropic spatial random processes, and we use this structure function to show that phase aberrations arising in aero-optics are, for an important range of operating parameters, locally Kolmogorov. This strongly suggests that the d5/3 power law for adaptive optics (AO) deformable mirror fitting error, where d denotes actuator separation, holds for certain important aero-optics scenarios. This framework also allows us to compute bounds on AO servo lag error and predictive control error. In addition, it provides us with the means to accurately simulate AO systems for the mitigation of aero-effects, and it may provide insight into underlying physical processes associated with turbulent flow. The techniques introduced here are demonstrated using data obtained from the Airborne Aero-Optics Laboratory.

Transferring the entatic-state principle to copper photochemistry

NASA Astrophysics Data System (ADS)

Dicke, B.; Hoffmann, A.; Stanek, J.; Rampp, M. S.; Grimm-Lebsanft, B.; Biebl, F.; Rukser, D.; Maerz, B.; Göries, D.; Naumova, M.; Biednov, M.; Neuber, G.; Wetzel, A.; Hofmann, S. M.; Roedig, P.; Meents, A.; Bielecki, J.; Andreasson, J.; Beyerlein, K. R.; Chapman, H. N.; Bressler, C.; Zinth, W.; Rübhausen, M.; Herres-Pawlis, S.

2018-03-01

The entatic state denotes a distorted coordination geometry of a complex from its typical arrangement that generates an improvement to its function. The entatic-state principle has been observed to apply to copper electron-transfer proteins and it results in a lowering of the reorganization energy of the electron-transfer process. It is thus crucial for a multitude of biochemical processes, but its importance to photoactive complexes is unexplored. Here we study a copper complex—with a specifically designed constraining ligand geometry—that exhibits metal-to-ligand charge-transfer state lifetimes that are very short. The guanidine-quinoline ligand used here acts on the bis(chelated) copper(I) centre, allowing only small structural changes after photoexcitation that result in very fast structural dynamics. The data were collected using a multimethod approach that featured time-resolved ultraviolet-visible, infrared and X-ray absorption and optical emission spectroscopy. Through supporting density functional calculations, we deliver a detailed picture of the structural dynamics in the picosecond-to-nanosecond time range.

The autobiography of addiction: autobiographical reasoning and psychological adjustment in abstinent alcoholics.

PubMed

Dunlop, William L; Tracy, Jessica L

2013-01-01

The narration of drinking experiences plays a central role in many alcohol rehabilitation programmes, yet few researchers have considered whether alcoholics' stories about such experiences relate to their psychological adjustment. Here we examine the extent to which drinking stories of abstinent alcoholics reflect autobiographical reasoning processes denoting self-change and self-stability, and whether these processes are associated with adjustment. Participants who revealed a positive self-change in their narratives about drinking demonstrated higher levels of self-esteem, authentic pride, and mental health compared to those who did not. In contrast, those who implied a sense of self-stability in their narratives demonstrated higher levels of hubristic pride and aggression, and poorer mental health. These results suggest that narrating positive self-change in the wake of substance abuse may underlie psychological adjustment, whereas establishing self-stability in these experiences may impede adjustment. More broadly, these findings underscore the importance of recognising the multi-dimensional nature of autobiographical reasoning.

Investigation and process optimization of SONOS cell's drain disturb in 2-transistor structure flash arrays

NASA Astrophysics Data System (ADS)

Xu, Zhaozhao; Qian, Wensheng; Chen, Hualun; Xiong, Wei; Hu, Jun; Liu, Donghua; Duan, Wenting; Kong, Weiran; Na, Wei; Zou, Shichang

2017-03-01

The mechanism and distribution of drain disturb (DD) are investigated in silicon-oxide-nitride-oxide-silicon (SONOS) flash cells. It is shown that DD is the only concern in this paper. First, the distribution of trapped charge in nitride layer is found to be non-localized (trapped in entire nitride layer along the channel) after programming. Likewise, the erase is also non-localized. Then, the main disturb mechanism: Fowler Nordheim tunneling (FNT) has been confirmed in this paper with negligible disturb effect from hot-hole injection (HHI). And then, distribution of DD is confirmed to be non-localized similarly, which denotes that DD exists in entire tunneling oxide (Oxide for short). Next, four process optimization ways are proposed for minimization of DD, and VTH shift is measured. It reveals that optimized lightly doped drain (LDD), halo, and channel implant are required for the fabrication of a robust SONOS cell. Finally, data retention and endurance of the optimized SONOS are demonstrated.

The Perfect Process Storm: Integration of CMMI, Agile, and Lean Six Sigma

DTIC Science & Technology

2012-12-01

struggled over the past few decades with a blizzard of process improvement methodologies such as Total Quality Manage- ment (TQM), Kaizen , JIT...the Japanese Kaizen system, targeting quality, effort, employee involvement, willingness to change, communication, and elimina- tion of waste in...blizzard of process improvement methodologies such as Total Quality Management (TQM), Kaizen , JIT Production, and Re-Engineering. These operations are

Earth Atmosphere Observations taken by the Expedition 35 Crew

NASA Image and Video Library

2013-04-03

Earth atmosphere observation taken by the Expedition 35 crew aboard the ISS. The colors roughly denote the layers of the atmosphere (the orange troposphere, the white stratosphere, and the blue mesosphere).

Instruments for Water Quality Monitoring

ERIC Educational Resources Information Center

Ballinger, Dwight G.

1972-01-01

Presents information regarding available instruments for industries and agencies who must monitor numerous aquatic parameters. Charts denote examples of parameters sampled, testing methods, range and accuracy of test methods, cost analysis, and reliability of instruments. (BL)

33 CFR 161.21 - Automated reporting.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) PORTS AND WATERWAYS SAFETY VESSEL TRAFFIC MANAGEMENT Vessel Movement Reporting System § 161.21 Automated... Centers denoted in Table 161.12(c) of this part. (b) Should an AIS become non-operational, while or prior...

Finite-time blow-up for quasilinear degenerate Keller-Segel systems of parabolic-parabolic type

NASA Astrophysics Data System (ADS)

Hashira, Takahiro; Ishida, Sachiko; Yokota, Tomomi

2018-05-01

This paper deals with the quasilinear degenerate Keller-Segel systems of parabolic-parabolic type in a ball of RN (N ≥ 2). In the case of non-degenerate diffusion, Cieślak-Stinner [3,4] proved that if q > m + 2/N, where m denotes the intensity of diffusion and q denotes the nonlinearity, then there exist initial data such that the corresponding solution blows up in finite time. As to the case of degenerate diffusion, it is known that a solution blows up if q > m + 2/N (see Ishida-Yokota [13]); however, whether the blow-up time is finite or infinite has been unknown. This paper gives an answer to the unsolved problem. Indeed, the finite-time blow-up of energy solutions is established when q > m + 2/N.

Whakapapa, genealogy and genetics.

PubMed

Evans, Donald

2012-05-01

This paper provides part of an analysis of the use of the Maori term whakapapa in a study designed to test the compatibility and commensurability of views of members of the indigenous culture of New Zealand with other views of genetic technologies extant in the country. It is concerned with the narrow sense of whakapapa as denoting biological ancestry, leaving the wider sense of whakapapa as denoting cultural identity for discussion elsewhere. The phenomenon of genetic curiosity is employed to facilitate this comparison. Four levels of curiosity are identified, in the Maori data, which penetrate more or less deeply into the psyche of individuals, affecting their health and wellbeing. These phenomena are compared with non-Maori experiences and considerable commonalities are discovered together with a point of marked difference. The results raise important questions for the ethical application of genetic technologies. © 2010 Blackwell Publishing Ltd.

On "spirituality," "religion," and "religions": a concept analysis.

PubMed

Lazenby, J Mark

2010-12-01

With increasing research on the role of religion and spirituality in the well-being of cancer patients, it is important to define distinctly the concepts that researchers use in these studies. Using the philosophies of Frege and James, this essay argues that the terms "religion" and "spirituality" denote the same concept, a concept that is identified with the Peace/Meaning subscale of the Functional Assessment of Chronic Illness Therapy--Spiritual Well-being Scale (FACIT-Sp). The term "Religions" denotes the concept under which specific religious systems are categorized. This article shows how muddling these concepts causes researchers to make claims that their findings do not support, and it ends in suggesting that future research must include universal measures of the concept of religion/spirituality in order to investigate further the role of interventions in the spiritual care of people living with cancer.

Polymorphic Contracts

NASA Astrophysics Data System (ADS)

Belo, João Filipe; Greenberg, Michael; Igarashi, Atsushi; Pierce, Benjamin C.

Manifest contracts track precise properties by refining types with predicates - e.g., {x : Int |x > 0 } denotes the positive integers. Contracts and polymorphism make a natural combination: programmers can give strong contracts to abstract types, precisely stating pre- and post-conditions while hiding implementation details - for example, an abstract type of stacks might specify that the pop operation has input type {x :α Stack |not ( empty x )} . We formalize this combination by defining FH, a polymorphic calculus with manifest contracts, and establishing fundamental properties including type soundness and relational parametricity. Our development relies on a significant technical improvement over earlier presentations of contracts: instead of introducing a denotational model to break a problematic circularity between typing, subtyping, and evaluation, we develop the metatheory of contracts in a completely syntactic fashion, omitting subtyping from the core system and recovering it post facto as a derived property.

A Look Inside Hurricane Alma

NASA Technical Reports Server (NTRS)

2002-01-01

Hurricane season in the eastern Pacific started off with a whimper late last month as Alma, a Category 2 hurricane, slowly made its way up the coast of Baja California, packing sustained winds of 110 miles per hour and gusts of 135 miles per hour. The above image of the hurricane was acquired on May 29, 2002, and displays the rainfall rates occurring within the storm. Click the image above to see an animated data visualization (3.8 MB) of the interior of Hurricane Alma. The images of the clouds seen at the beginning of the movie were retrieved from the National Oceanic and Atmospheric Association's (NOAA's) Geostationary Orbiting Environmental Satellite (GOES) network. As the movie continues, the clouds are peeled away to reveal an image of rainfall levels in the hurricane. The rainfall data were obtained by the Precipitation Radar aboard NASA's Tropical Rainfall Measuring Mission (TRMM) satellite. The Precipitation Radar bounces radio waves off of clouds to retrieve a reading of the number of large, rain-sized droplets within the clouds. Using these data, scientists can tell how much precipitation is occurring within and beneath a hurricane. In the movie, yellow denotes areas where 0.5 inches of rain is falling per hour, green denotes 1 inch per hour, and red denotes over 2 inches per hour. (Please note that high resolution still images of Hurricane Alma are available in the NASA Visible Earth in TIFF format.) Image and animation courtesy Lori Perkins, NASA Goddard Space Flight Center Scientific Visualization Studio

Effects of pore structure and electrolyte on the capacitive characteristics of steam- and KOH-activated carbons for supercapacitors

NASA Astrophysics Data System (ADS)

Wu, Feng-Chin; Tseng, Ru-Ling; Hu, Chi-Chang; Wang, Chen-Ching

Four kinds of activated carbons (denoted as ACs) with specific surface area of ca. 1050 m 2 g -1 were fabricated from fir wood and pistachio shell by means of steam activation or chemical activation with KOH. Pore structures of ACs were characterized by a t-plot method based on N 2 adsorption isotherms. The amount of mesopores within KOH-activated carbons ranged from 9.2 to 15.3% while 33.3-49.5% of mesopores were obtained for the steam-activated carbons. The pore structure, surface functional groups, and raw materials of ACs, as well as pH and the supporting electrolyte were also found to be significant factors determining the capacitive characteristics of ACs. The excellent capacitive characteristics in both acidic and neutral media and the weak dependence of the specific capacitance on the scan rate of cyclic voltammetry (CV) for the ACs derived from the pistachio shell with steam activation (denoted as P-H 2O-AC) revealed their promising potential in the application of supercapacitors. The ACs derived from fir wood with KOH activation (denoted as F-KOH-AC), on the other hand, showed the best capacitive performance in H 2SO 4 due to excellent reversibility and high specific capacitance (180 F g -1 measured at 10 mV s -1), which is obviously larger than 100 F g -1 (a typical value of activated carbons with specific surface areas equal to/above 1000 m 2 g -1).

Bonding and magnetic response properties of several toroid structures. Insights of the role of Ni2S2 as a building block from relativistic density functional theory calculations.

PubMed

Muñoz-Castro, Alvaro

2011-10-06

Relativistic density functional calculations were carried out on several nickel toroid mercaptides of the general formula [Ni(μ-SR)(2)](n), with the aim to characterize and analyze their stability and magnetic response properties, in order to gain more insights into their stabilization and size-dependent behavior. The Ni-ligand interaction has been studied by means projected density of states and energy decomposition analysis, which denotes its stabilizing character. The graphical representation of the response to an external magnetic field is applied for the very first time taking into account the spin-orbit term. This map allows one to clearly characterize the magnetic behavior inside and in the closeness of the toroid structure showing the prescence of paratropic ring currents inside the Ni(n) ring, and by contrast, diatropic currents confined in each Ni(2)S(2) motif denoting an aromatic behavior (in terms of magnetic criteria). The calculated data suggests that the Ni(2)S(2) moiety can be regarded as a stable constructing block, which can afford several toroid structures of different nuclearities in agreement with that reported in the experimental literature. In addition, the effects of the relativistic treatment over the magnetic response properties on these lighter compounds are denoted by comparing nonrelativistic, scalar relativistic, and scalar plus spin-orbit relativistic treatments, showing their acting, although nonpronunced, role.

What is a sports injury?

PubMed

Timpka, Toomas; Jacobsson, Jenny; Bickenbach, Jerome; Finch, Caroline F; Ekberg, Joakim; Nordenfelt, Lennart

2014-04-01

Current sports injury reporting systems lack a common conceptual basis. We propose a conceptual foundation as a basis for the recording of health problems associated with participation in sports, based on the notion of impairment used by the World Health Organization. We provide definitions of sports impairment concepts to represent the perspectives of health services, the participants in sports and physical exercise themselves, and sports institutions. For each perspective, the duration of the causative event is used as the norm for separating concepts into those denoting impairment conditions sustained instantly and those developing gradually over time. Regarding sports impairment sustained in isolated events, 'sports injury' denotes the loss of bodily function or structure that is the object of observations in clinical examinations; 'sports trauma' is defined as an immediate sensation of pain, discomfort or loss of functioning that is the object of athlete self-evaluations; and 'sports incapacity' is the sidelining of an athlete because of a health evaluation made by a legitimate sports authority that is the object of time loss observations. Correspondingly, sports impairment caused by excessive bouts of physical exercise is denoted as 'sports disease' (overuse syndrome) when observed by health service professionals during clinical examinations, 'sports illness' when observed by the athlete in self-evaluations, and 'sports sickness' when recorded as time loss from sports participation by a sports body representative. We propose a concerted development effort in this area that takes advantage of concurrent ontology management resources and involves the international sporting community in building terminology systems that have broad relevance.

[Systemic inflammation: theoretical and methodological approaches to description of general pathological process model. Part 3. Backgroung for nonsyndromic approach].

PubMed

Gusev, E Yu; Chereshnev, V A

2013-01-01

Theoretical and methodological approaches to description of systemic inflammation as general pathological process are discussed. It is shown, that there is a need of integration of wide range of types of researches to develop a model of systemic inflammation.

Understanding Teachers' Cognitive Processes during Online Professional Learning: A Methodological Comparison

ERIC Educational Resources Information Center

Beach, Pamela; Willows, Dale

2017-01-01

This study examined the effectiveness of three types of think aloud methods for understanding elementary teachers' cognitive processes as they used a professional development website. A methodology combining a retrospective think aloud procedure with screen capture technology (referred to as the virtual revisit) was compared with concurrent and…

Duoethnography: A New Research Methodology for Mathematics Education

ERIC Educational Resources Information Center

Rapke, Tina Kathleen

2014-01-01

I have developed an adaptation of the emerging duoethnography methodology that allows me to draw on my processes of creating mathematics, interpret these processes for what they might mean for classrooms, and explore/reconceptualize my complementary and competing perspectives as a mathematician and an educator. This article includes a…

A Tool for Creating Healthier Workplaces: The Conducivity Process

ERIC Educational Resources Information Center

Karasek, Robert A.

2004-01-01

The conducivity process, a methodology for creating healthier workplaces by promoting conducive production, is illustrated through the use of the "conducivity game" developed in the NordNet Project in Sweden, which was an action research project to test a job redesign methodology. The project combined the "conducivity" hypotheses about a…

Methodological challenges when doing research that includes ethnic minorities: a scoping review.

PubMed

Morville, Anne-Le; Erlandsson, Lena-Karin

2016-11-01

There are challenging methodological issues in obtaining valid and reliable results on which to base occupational therapy interventions for ethnic minorities. The aim of this scoping review is to describe the methodological problems within occupational therapy research, when ethnic minorities are included. A thorough literature search yielded 21 articles obtained from the scientific databases PubMed, Cinahl, Web of Science and PsychInfo. Analysis followed Arksey and O'Malley's framework for scoping reviews, applying content analysis. The results showed methodological issues concerning the entire research process from defining and recruiting samples, the conceptual understanding, lack of appropriate instruments, data collection using interpreters to analyzing data. In order to avoid excluding the ethnic minorities from adequate occupational therapy research and interventions, development of methods for the entire research process is needed. It is a costly and time-consuming process, but the results will be valid and reliable, and therefore more applicable in clinical practice.

Towards Methodologies for Building Knowledge-Based Instructional Systems.

ERIC Educational Resources Information Center

Duchastel, Philippe

1992-01-01

Examines the processes involved in building instructional systems that are based on artificial intelligence and hypermedia technologies. Traditional instructional systems design methodology is discussed; design issues including system architecture and learning strategies are addressed; and a new methodology for building knowledge-based…

FINDING A METHOD FOR THE MADNESS: A COMPARATIVE ANALYSIS OF STRATEGIC DESIGN METHODOLOGIES

DTIC Science & Technology

2017-06-01

FINDING A METHOD FOR THE MADNESS: A COMPARATIVE ANALYSIS OF STRATEGIC DESIGN METHODOLOGIES BY AMANDA DONNELLY A THESIS...work develops a comparative model for strategic design methodologies, focusing on the primary elements of vision, time, process, communication and...collaboration, and risk assessment. My analysis dissects and compares three potential design methodologies including, net assessment, scenarios and

Effects-Based Operations in the Cyber Domain

DTIC Science & Technology

2017-05-03

as the joint targeting methodology . The description that Batschelet gave the traditional targeting methodology included a process of, “Decide, Detect...technology, requires new planning and methodology to fight back. This paper evaluates current Department of Defense doctrine to look at ways to conduct...developing its cyber tactics, techniques, and procedures, which, includes various targeting methodologies , such as the use of effects-based

Integrating automated support for a software management cycle into the TAME system

NASA Technical Reports Server (NTRS)

Sunazuka, Toshihiko; Basili, Victor R.

1989-01-01

Software managers are interested in the quantitative management of software quality, cost and progress. An integrated software management methodology, which can be applied throughout the software life cycle for any number purposes, is required. The TAME (Tailoring A Measurement Environment) methodology is based on the improvement paradigm and the goal/question/metric (GQM) paradigm. This methodology helps generate a software engineering process and measurement environment based on the project characteristics. The SQMAR (software quality measurement and assurance technology) is a software quality metric system and methodology applied to the development processes. It is based on the feed forward control principle. Quality target setting is carried out before the plan-do-check-action activities are performed. These methodologies are integrated to realize goal oriented measurement, process control and visual management. A metric setting procedure based on the GQM paradigm, a management system called the software management cycle (SMC), and its application to a case study based on NASA/SEL data are discussed. The expected effects of SMC are quality improvement, managerial cost reduction, accumulation and reuse of experience, and a highly visual management reporting system.

How to do a grounded theory study: a worked example of a study of dental practices

PubMed Central

2011-01-01

Background Qualitative methodologies are increasingly popular in medical research. Grounded theory is the methodology most-often cited by authors of qualitative studies in medicine, but it has been suggested that many 'grounded theory' studies are not concordant with the methodology. In this paper we provide a worked example of a grounded theory project. Our aim is to provide a model for practice, to connect medical researchers with a useful methodology, and to increase the quality of 'grounded theory' research published in the medical literature. Methods We documented a worked example of using grounded theory methodology in practice. Results We describe our sampling, data collection, data analysis and interpretation. We explain how these steps were consistent with grounded theory methodology, and show how they related to one another. Grounded theory methodology assisted us to develop a detailed model of the process of adapting preventive protocols into dental practice, and to analyse variation in this process in different dental practices. Conclusions By employing grounded theory methodology rigorously, medical researchers can better design and justify their methods, and produce high-quality findings that will be more useful to patients, professionals and the research community. PMID:21902844

How to do a grounded theory study: a worked example of a study of dental practices.

PubMed

Sbaraini, Alexandra; Carter, Stacy M; Evans, R Wendell; Blinkhorn, Anthony

2011-09-09

Qualitative methodologies are increasingly popular in medical research. Grounded theory is the methodology most-often cited by authors of qualitative studies in medicine, but it has been suggested that many 'grounded theory' studies are not concordant with the methodology. In this paper we provide a worked example of a grounded theory project. Our aim is to provide a model for practice, to connect medical researchers with a useful methodology, and to increase the quality of 'grounded theory' research published in the medical literature. We documented a worked example of using grounded theory methodology in practice. We describe our sampling, data collection, data analysis and interpretation. We explain how these steps were consistent with grounded theory methodology, and show how they related to one another. Grounded theory methodology assisted us to develop a detailed model of the process of adapting preventive protocols into dental practice, and to analyse variation in this process in different dental practices. By employing grounded theory methodology rigorously, medical researchers can better design and justify their methods, and produce high-quality findings that will be more useful to patients, professionals and the research community.

Tracer methodology: an appropriate tool for assessing compliance with accreditation standards?

PubMed

Bouchard, Chantal; Jean, Olivier

2017-10-01

Tracer methodology has been used by Accreditation Canada since 2008 to collect evidence on the quality and safety of care and services, and to assess compliance with accreditation standards. Given the importance of this methodology in the accreditation program, the objective of this study is to assess the quality of the methodology and identify its strengths and weaknesses. A mixed quantitative and qualitative approach was adopted to evaluate consistency, appropriateness, effectiveness and stakeholder synergy in applying the methodology. An online questionnaire was sent to 468 Accreditation Canada surveyors. According to surveyors' perceptions, tracer methodology is an effective tool for collecting useful, credible and reliable information to assess compliance with Qmentum program standards and priority processes. The results show good coherence between methodology components (appropriateness of the priority processes evaluated, activities to evaluate a tracer, etc.). The main weaknesses are the time constraints faced by surveyors and management's lack of cooperation during the evaluation of tracers. The inadequate amount of time allowed for the methodology to be applied properly raises questions about the quality of the information obtained. This study paves the way for a future, more in-depth exploration of the identified weaknesses to help the accreditation organization make more targeted improvements to the methodology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Advanced glossmeters for industrial applications

NASA Astrophysics Data System (ADS)

Kuivalainen, Kalle; Oksman, Antti; Juuti, Mikko; Myller, Kari; Peiponen, Kai-Erik

2010-05-01

In this paper, we present three new types of diffractive-optical-element (DOE)-based glossmeters (DOGs) that have been developed for both laboratory and online local specular gloss measurements of objects in industrial processes. The three are denoted as the handheld wireless glossmeter, µDOG two-dimensional (2D) and µDOG one-dimensional (1D), respectively. These glossmeters are designed to operate under conditions where gloss measurement with conventional glossmeters is impossible or difficult, or when fine structures of the gloss over a surface are an issue. Here, we show the applicability of the handheld glossmeter and µDOG 2D in the inspection of gloss from rough stainless steel plates finished by different machining methods. We also briefly introduce the concept of online gauge µDOG 1D for gloss assessment in industrial measurement environments.

EUV lithography for 30nm half pitch and beyond: exploring resolution, sensitivity, and LWR tradeoffs

NASA Astrophysics Data System (ADS)

Putna, E. Steve; Younkin, Todd R.; Chandhok, Manish; Frasure, Kent

2009-03-01

The International Technology Roadmap for Semiconductors (ITRS) denotes Extreme Ultraviolet (EUV) lithography as a leading technology option for realizing the 32nm half-pitch node and beyond. Readiness of EUV materials is currently one high risk area according to assessments made at the 2008 EUVL Symposium. The main development issue regarding EUV resist has been how to simultaneously achieve high sensitivity, high resolution, and low line width roughness (LWR). This paper describes the strategy and current status of EUV resist development at Intel Corporation. Data is presented utilizing Intel's Micro-Exposure Tool (MET) examining the feasibility of establishing a resist process that simultaneously exhibits <=30nm half-pitch (HP) L/S resolution at <=10mJ/cm2 with <=4nm LWR.

EUV lithography for 22nm half pitch and beyond: exploring resolution, LWR, and sensitivity tradeoffs

NASA Astrophysics Data System (ADS)

Putna, E. Steve; Younkin, Todd R.; Caudillo, Roman; Chandhok, Manish

2010-04-01

The International Technology Roadmap for Semiconductors (ITRS) denotes Extreme Ultraviolet (EUV) lithography as a leading technology option for realizing the 22nm half pitch node and beyond. Readiness of EUV materials is currently one high risk area according to recent assessments made at the 2009 EUVL Symposium. The main development issue regarding EUV resist has been how to simultaneously achieve high sensitivity, high resolution, and low line width roughness (LWR). This paper describes the strategy and current status of EUV resist development at Intel Corporation. Data collected utilizing Intel's Micro-Exposure Tool (MET) is presented in order to examine the feasibility of establishing a resist process that simultaneously exhibits <=22nm half-pitch (HP) L/S resolution at <= 12.5mJ/cm2 with <= 4nm LWR.

Reversible pressure pre-amorphization of a piezochromic metal-organic framework.

PubMed

Andrzejewski, M; Casati, N; Katrusiak, A

2017-11-07

The piezochromic metal-organic framework Co 2 (Bdc) 2 Dabco·4DMF·H 2 O (Bdc denotes 1,4-benzenedicarboxylate, Dabco - 1,4-diazabicyclo[2.2.2]octane, and DMF - dimethylformamide) under ambient conditions is tetragonal (phase α) and at about 1.9 GPa undergoes a strong pressure-induced shortening of translational correlations in the sample. A broad gradual pre-amorphization process starting at about 0.7 GPa reduces the tetragonal symmetry and is described as phase β. The pre-amorphization mechanism involves several competing distortions of the Bdc linkers and Co(ii)-coordination schemes. These in turn, affect the crystal field around the cations and their optical absorption. The compression strongly affects the VIS absorption of this piezochromic compound visibly changing its colour from blue to red.

A critical review of RHIC experimental results

NASA Astrophysics Data System (ADS)

Trainor, Thomas A.

2014-07-01

The relativistic heavy-ion collider (RHIC) was constructed to achieve an asymptotic state of nuclear matter in heavy-ion collisions, a near-ideal gas of deconfined quarks and gluons denoted quark-gluon plasma or QGP. RHIC collisions are indeed very different from the hadronic processes observed at the Bevalac and AGS, but high-energy elementary-collision mechanisms are also non-hadronic. The two-component model (TCM) combines measured properties of elementary collisions with the Glauber eikonal model to provide an alternative asymptotic limit for A-A collisions. RHIC data have been interpreted to indicate formation of a strongly-coupled QGP (sQGP) or "perfect liquid". In this review, I consider the experimental evidence that seems to support such conclusions and alternative evidence that may conflict with those conclusions and suggest different interpretations.

CP-odd Higgs boson production in eγ collisions

NASA Astrophysics Data System (ADS)

Sasaki, Ken; Uematsu, Tsuneo

2018-06-01

We investigate the CP-odd Higgs boson production via two-photon processes in eγ collisions. The CP-odd Higgs boson, which we denote as A0, is expected to appear in the Two-Higgs Doublet Models (2HDM) as a minimal extension of Higgs sector for which the Minimal Supersymmetric Standard Model (MSSM) is a special case. The scattering amplitude for eγ → eA0 is evaluated at the electroweak one-loop level. The dominant contribution comes from top-quark loops when A0 boson is rather light and tan ⁡ β is not large. There are no contributions from the W-boson and Z-boson loops nor the scalar top-quark (stop) loops. The differential cross section for the A0 production is analyzed.

The modulation of delta responses in the interaction of brightness and emotion.

PubMed

Kurt, Pınar; Eroğlu, Kübra; Bayram Kuzgun, Tubanur; Güntekin, Bahar

2017-02-01

The modulation of delta oscillations (0.5-3.5Hz) by emotional stimuli is reported. Physical attributes such as color, brightness and spatial frequency of emotional visual stimuli have crucial effect on the perception of complex scene. Brightness is intimately related with emotional valence. Here we explored the effect of brightness on delta oscillatory responses upon presentation of pleasant, unpleasant and neutral pictures. We found that bright unpleasant pictures elicited lower amplitude of delta response than original unpleasant pictures. The electrophysiological finding of the study was in accordance with behavioral data. These results denoted the importance of delta responses on the examination of the association between perceptual and conceptual processes while in the question of brightness and emotion. Copyright © 2016 Elsevier B.V. All rights reserved.

Indirect calculation of monoclonal antibodies in nanoparticles using the radiolabeling process with technetium 99 metastable as primary factor: Alternative methodology for the entrapment efficiency.

PubMed

Helal-Neto, Edward; Cabezas, Santiago Sánchez; Sancenón, Félix; Martínez-Máñez, Ramón; Santos-Oliveira, Ralph

2018-05-10

The use of monoclonal antibodies (Mab) in the current medicine is increasing. Antibody-drug conjugates (ADCs) represents an increasingly and important modality for treating several types of cancer. In this area, the use of Mab associated with nanoparticles is a valuable strategy. However, the methodology used to calculate the Mab entrapment, efficiency and content is extremely expensive. In this study we developed and tested a novel very simple one-step methodology to calculate monoclonal antibody entrapment in mesoporous silica (with magnetic core) nanoparticles using the radiolabeling process as primary methodology. The magnetic core mesoporous silica were successfully developed and characterised. The PXRD analysis at high angles confirmed the presence of magnetic cores in the structures and transmission electron microscopy allowed to determine structures size (58.9 ± 8.1 nm). From the isotherm curve, a specific surface area of 872 m 2 /g was estimated along with a pore volume of 0.85 cm 3 /g and an average pore diameter of 3.15 nm. The radiolabeling process to proceed the indirect determination were well-done. Trastuzumab were successfully labeled (>97%) with Tc-99m generating a clear suspension. Besides, almost all the Tc-99m used (labeling the trastuzumab) remained trapped in the surface of the mesoporous silica for a period as long as 8 h. The indirect methodology demonstrated a high entrapment in magnetic core mesoporous silica surface of Tc-99m-traztuzumab. The results confirmed the potential use from the indirect entrapment efficiency methodology using the radiolabeling process, as a one-step, easy and cheap methodology. Copyright © 2018 Elsevier B.V. All rights reserved.

Methodology for assessing the effectiveness of access management techniques : final report, September 14, 1998.

DOT National Transportation Integrated Search

1998-09-14

A methodology for assessing the effectiveness of access management techniques on suburban arterial highways is developed. The methodology is described as a seven-step process as follows: (1) establish the purpose of the analysis (2) establish the mea...

Data Centric Development Methodology

ERIC Educational Resources Information Center

Khoury, Fadi E.

2012-01-01

Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

Towards a Quantum Computer?

NASA Astrophysics Data System (ADS)

Bellac, Michel Le

2014-11-01

In everyday life, practically all the information which is processed, exchanged or stored is coded in the form of discrete entities called bits, which take two values only, by convention 0 and 1. With the present technology for computers and optical fibers, bits are carried by electrical currents and electromagnetic waves corresponding to macroscopic fluxes of electrons and photons, and they are stored in memories of various kinds, for example, magnetic memories. Although quantum physics is the basic physics which underlies the operation of a transistor (Chapter 6) or of a laser (Chapter 4), each exchanged or processed bit corresponds to a large number of elementary quantum systems, and its behavior can be described classically due to the strong interaction with the environment (Chapter 9). For about thirty years, physicists have learned to manipulate with great accuracy individual quantum systems: photons, electrons, neutrons, atoms, and so forth, which opens the way to using two-state quantum systems, such as the polarization states of a photon (Chapter 2) or the two energy levels of an atom or an ion (Chapter 4) in order to process, exchange or store information. In § 2.3.2, we used the two polarization states of a photon, vertical (V) and horizontal (H), to represent the values 0 and 1 of a bit and to exchange information. In what follows, it will be convenient to use Dirac's notation (see Appendix A.2.2 for more details), where a vertical polarization state is denoted by |V> or |0> and a horizontal one by |H> or |1>, while a state with arbitrary polarization will be denoted by |ψ>. The polarization states of a photon give one possible realization of a quantum bit, or for short a qubit. Thanks to the properties of quantum physics, quantum computers using qubits, if they ever exist, would outperform classical computers for some specific, but very important, problems. In Sections 8.1 and 8.2, we describe some typical quantum algorithms and, in order to do so, we shall not be able to avoid some technical developments. However, these two sections may be skipped in a first reading, as they are not necessary for understanding the more general considerations of Sections 8.3 and 8.4.

Stimulated Recall Methodology for Assessing Work System Barriers and Facilitators in Family-Centered Rounds in a Pediatric Hospital

PubMed Central

Carayon, Pascale; Li, Yaqiong; Kelly, Michelle M.; DuBenske, Lori L.; Xie, Anping; McCabe, Brenna; Orne, Jason; Cox, Elizabeth D.

2014-01-01

Human factors and ergonomics methods are needed to redesign healthcare processes and support patient-centered care, in particular for vulnerable patients such as hospitalized children. We implemented and evaluated a stimulated recall methodology for collective confrontation in the context of family-centered rounds. Five parents and five healthcare team members reviewed video records of their bedside rounds, and were then interviewed using the stimulated recall methodology to identify work system barriers and facilitators in family-centered rounds. The evaluation of the methodology was based on a survey of the participants, and a qualitative analysis of interview data in light of the work system model of Smith and Carayon (1989; 2000). Positive survey feedback from the participants was received. The stimulated recall methodology identified barriers and facilitators in all work system elements. Participatory ergonomics methods such as the stimulated recall methodology allow a range of participants, including parents and children, to participate in healthcare process improvement. PMID:24894378

One size does not fit all: face emotion processing impairments in semantic dementia, behavioural-variant frontotemporal dementia and Alzheimer's disease are mediated by distinct cognitive deficits.

PubMed

Miller, Laurie A; Hsieh, Sharpley; Lah, Suncica; Savage, Sharon; Hodges, John R; Piguet, Olivier

2012-01-01

Patients with frontotemporal dementia (both behavioural variant [bvFTD] and semantic dementia [SD]) as well as those with Alzheimer's disease (AD) show deficits on tests of face emotion processing, yet the mechanisms underlying these deficits have rarely been explored. We compared groups of patients with bvFTD (n = 17), SD (n = 12) or AD (n = 20) to an age- and education-matched group of healthy control subjects (n = 36) on three face emotion processing tasks (Ekman 60, Emotion Matching and Emotion Selection) and found that all three patient groups were similarly impaired. Analyses of covariance employed to partial out the influences of language and perceptual impairments, which frequently co-occur in these patients, provided evidence of different underlying cognitive mechanisms. These analyses revealed that language impairments explained the original poor scores obtained by the SD patients on the Ekman 60 and Emotion Selection tasks, which involve verbal labels. Perceptual deficits contributed to Emotion Matching performance in the bvFTD and AD patients. Importantly, all groups remained impaired on one task or more following these analyses, denoting a primary emotion processing disturbance in these dementia syndromes. These findings highlight the multifactorial nature of emotion processing deficits in patients with dementia.

The use of concept maps during knowledge elicitation in ontology development processes – the nutrigenomics use case

PubMed Central

Castro, Alexander Garcia; Rocca-Serra, Philippe; Stevens, Robert; Taylor, Chris; Nashar, Karim; Ragan, Mark A; Sansone, Susanna-Assunta

2006-01-01

Background Incorporation of ontologies into annotations has enabled 'semantic integration' of complex data, making explicit the knowledge within a certain field. One of the major bottlenecks in developing bio-ontologies is the lack of a unified methodology. Different methodologies have been proposed for different scenarios, but there is no agreed-upon standard methodology for building ontologies. The involvement of geographically distributed domain experts, the need for domain experts to lead the design process, the application of the ontologies and the life cycles of bio-ontologies are amongst the features not considered by previously proposed methodologies. Results Here, we present a methodology for developing ontologies within the biological domain. We describe our scenario, competency questions, results and milestones for each methodological stage. We introduce the use of concept maps during knowledge acquisition phases as a feasible transition between domain expert and knowledge engineer. Conclusion The contributions of this paper are the thorough description of the steps we suggest when building an ontology, example use of concept maps, consideration of applicability to the development of lower-level ontologies and application to decentralised environments. We have found that within our scenario conceptual maps played an important role in the development process. PMID:16725019

Factors that affect implementation of a nurse staffing directive: results from a qualitative multi-case evaluation.

PubMed

Robinson, Claire H; Annis, Ann M; Forman, Jane; Krein, Sarah L; Yankey, Nicholas; Duffy, Sonia A; Taylor, Beth; Sales, Anne E

2016-08-01

To assess implementation of the Veterans Health Administration staffing methodology directive. In 2010 the Veterans Health Administration promulgated a staffing methodology directive for inpatient nursing units to address staffing and budget forecasting. A qualitative multi-case evaluation approach assessed staffing methodology implementation. Semi-structured telephone interviews were conducted from March - June 2014 with Nurse Executives and their teams at 21 facilities. Interviews focused on the budgeting process, implementation experiences, use of data, leadership support, and training. An implementation score was created for each facility using a 4-point rating scale. The scores were used to select three facilities (low, medium and high implementation) for more detailed case studies. After analysing interview summaries, the evaluation team developed a four domain scoring structure: (1) integration of staffing methodology into budget development; (2) implementation of the Directive elements; (3) engagement of leadership and staff; and (4) use of data to support the staffing methodology process. The high implementation facility had leadership understanding and endorsement of staffing methodology, confidence in and ability to work with data, and integration of staffing methodology results into the budgeting process. The low implementation facility reported poor leadership engagement and little understanding of data sources and interpretation. Implementation varies widely across facilities. Implementing staffing methodology in facilities with complex and changing staffing needs requires substantial commitment at all organizational levels especially for facilities that have traditionally relied on historical levels to budget for staffing. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Risk-based Methodology for Validation of Pharmaceutical Batch Processes.

PubMed

Wiles, Frederick

2013-01-01

In January 2011, the U.S. Food and Drug Administration published new process validation guidance for pharmaceutical processes. The new guidance debunks the long-held industry notion that three consecutive validation batches or runs are all that are required to demonstrate that a process is operating in a validated state. Instead, the new guidance now emphasizes that the level of monitoring and testing performed during process performance qualification (PPQ) studies must be sufficient to demonstrate statistical confidence both within and between batches. In some cases, three qualification runs may not be enough. Nearly two years after the guidance was first published, little has been written defining a statistical methodology for determining the number of samples and qualification runs required to satisfy Stage 2 requirements of the new guidance. This article proposes using a combination of risk assessment, control charting, and capability statistics to define the monitoring and testing scheme required to show that a pharmaceutical batch process is operating in a validated state. In this methodology, an assessment of process risk is performed through application of a process failure mode, effects, and criticality analysis (PFMECA). The output of PFMECA is used to select appropriate levels of statistical confidence and coverage which, in turn, are used in capability calculations to determine when significant Stage 2 (PPQ) milestones have been met. The achievement of Stage 2 milestones signals the release of batches for commercial distribution and the reduction of monitoring and testing to commercial production levels. Individuals, moving range, and range/sigma charts are used in conjunction with capability statistics to demonstrate that the commercial process is operating in a state of statistical control. The new process validation guidance published by the U.S. Food and Drug Administration in January of 2011 indicates that the number of process validation batches or runs required to demonstrate that a pharmaceutical process is operating in a validated state should be based on sound statistical principles. The old rule of "three consecutive batches and you're done" is no longer sufficient. The guidance, however, does not provide any specific methodology for determining the number of runs required, and little has been published to augment this shortcoming. The paper titled "Risk-based Methodology for Validation of Pharmaceutical Batch Processes" describes a statistically sound methodology for determining when a statistically valid number of validation runs has been acquired based on risk assessment and calculation of process capability.

Speciated mercury at marine, coastal, and inland sites in New England - Part 2: Relationships with atmospheric physical parameters

NASA Astrophysics Data System (ADS)

Mao, H.; Talbot, R.; Hegarty, J.; Koermer, J.

2012-05-01

Long-term continuous measurements of gaseous elemental mercury (Hg0), reactive gaseous mercury (RGM), and particulate phase mercury (HgP) were conducted at coastal (Thompson Farm, denoted as TF), marine (Appledore Island, denoted as AI), and elevated inland rural (Pac Monadnock, denoted as PM) monitoring sites of the AIRMAP Observing Network. Diurnal, seasonal, annual, and interannual variability in Hg0, RGM, and HgP from the three distinctly different environments were characterized and compared in Part 1. Here in Part 2 relationships between speciated mercury (i.e., Hg0, RGM, and HgP) and climate variables (e.g., temperature, wind speed, humidity, solar radiation, and precipitation) were examined. The best point-to-point correlations were found between Hg0 and temperature in summer at TF and spring at PM, but there was no similar correlation at AI. Subsets of data demonstrated regional impacts of episodic dynamic processes such as strong cyclonic systems on ambient levels of Hg0 at all three sites, possibly through enhanced oceanic evasion of Hg0. A tendency of higher levels of RGM and HgP was identified in spring and summer under sunny conditions in all environments. Specifically, the 10th, 25th, median, 75th, and 90th percentile mixing ratios of RGM and HgP increased with stronger solar radiation at both the coastal and marine sites. These metrics decreased with increasing wind speed at AI indicating enhanced loss of RGM and HgP through deposition. RGM and HgP levels correlated with temperature positively in spring, summer and fall at the coastal and marine locations. At the coastal site relationships between RGM and relative humidity suggested a clear decreasing tendency in all metrics from <40% to 100% relative humidity in all seasons especially in spring, compared to less variability in the marine environment. The effect of precipitation on RGM at coastal and marine locations was similar. At the coastal site, RGM levels were a factor of 3-4 to two orders of magnitude higher under dry conditions than rainy conditions in all seasons. In winter RGM mixing ratios appeared to be mostly above the limit of detection (LOD) during snowfalls suggesting less scavenging efficiency of snow. Mixing ratios of HgP at the coastal and marine sites remained above the LOD under rainy conditions. Precipitation had negligible impact on the magnitude and pattern of diurnal variation of HgP in all seasons in the marine environment.

A Fairy-Tale Landscape

NASA Image and Video Library

2008-05-29

Fun, fairy-tale nicknames have been assigned to features in this animated view of the workspace reachable by the robotic arm of NASA Phoenix Mars Lander. For example, Sleepy Hollow denotes a trench and Headless designates a rock.

ECOREGIONS OF TEXAS

EPA Science Inventory

Ecoregions denote areas of general similarity in ecosystems and in the type, quality, and quantity of environmental resources. They are designed to serve as a spatial framework for the research, assessment, management, and monitoring of ecosystems and ecosystem components. Ecore...

Lexique et grammaire des sentiments: les causatifs (Lexicon and the Grammar of Feeling: Causatives)

ERIC Educational Resources Information Center

Debyser, F.

1976-01-01

Examines syntactic and semantic constructions of French verbs denoting and causing emotions; and lists these verbs according to infinitive, "active" adjective, and "passive" adjective. (Text is in French.) (AM)

Options for Hardening FinFETS with Flowable Oxide Between Fins

DTIC Science & Technology

2017-03-01

thus hardening by process is needed. Using the methodology of CV measurements on inexpensive experimental blanket oxides we have determined options...NY 10598 Abstract: A methodology using radiation-induced charge measurements by CV techniques on blanket oxides is shown to aid in the choice...of process options for hardening FinFETs. Net positive charge in flowable oxides was reduced by 50 % using a simple non -intrusive process change

Transforming the patient care environment with Lean Six Sigma and realistic evaluation.

PubMed

Black, Jason

2009-01-01

Lean Six Sigma (LSS) is a structured methodology for transforming processes, but it does not fully consider the complex social interactions that cause processes to form in hospital organizations. By combining LSS implementations with the concept of Realistic Evaluation, a methodology that promotes change by assessing and considering the individual characteristics of an organization's social environment, successful and sustainable process improvement is more likely.

Staff Training for Business Process Improvement: The Benefit of Role-Plays in the Case of KreditSim

ERIC Educational Resources Information Center

Borner, Rene; Moormann, Jurgen; Wang, Minhong

2012-01-01

Purpose: The paper aims to explore staff's experience with role-plays using the example of training bank employees in Six Sigma as a major methodology for business process improvement. Design/methodology/approach: The research is based on a case study. A role-play, KreditSim, is used to simulate a loan approval process that has to be improved by…

Lean methodology: supporting battlefield medical fitness by cutting process waste.

PubMed

Huggins, Elaine J

2010-01-01

Healthcare has long looked at decreasing risk in communication and patient care processes. Increasing the simplicity in communication and patient care process is a newer concept contained in Lean methodology. Lean is a strategy for achieving improvement in performance through the elimination of steps that use resources without contributing to customer value. This is known as cutting waste or nonvalue added steps. This article outlines how the use of Lean improved a key process that supports battlefield medical fitness.

Potassium Sodium Niobate-Based Lead-Free Piezoelectric Multilayer Ceramics Co-Fired with Nickel Electrodes.

PubMed

Kawada, Shinichiro; Hayashi, Hiroyuki; Ishii, Hideki; Kimura, Masahiko; Ando, Akira; Omiya, Suetake; Kubodera, Noriyuki

2015-11-03

Although lead-free piezoelectric ceramics have been extensively studied, many problems must still be overcome before they are suitable for practical use. One of the main problems is fabricating a multilayer structure, and one solution attracting growing interest is the use of lead-free multilayer piezoelectric ceramics. The paper reviews work that has been done by the authors on lead-free alkali niobate-based multilayer piezoelectric ceramics co-fired with nickel inner electrodes. Nickel inner electrodes have many advantages, such as high electromigration resistance, high interfacial strength with ceramics, and greater cost effectiveness than silver palladium inner electrodes. However, widely used lead zirconate titanate-based ceramics cannot be co-fired with nickel inner electrodes, and silver palladium inner electrodes are usually used for lead zirconate titanate-based piezoelectric ceramics. A possible alternative is lead-free ceramics co-fired with nickel inner electrodes. We have thus been developing lead-free alkali niobate-based multilayer ceramics co-fired with nickel inner electrodes. The normalized electric-field-induced thickness strain ( S max / E max ) of a representative alkali niobate-based multilayer ceramic structure with nickel inner electrodes was 360 pm/V, where S max denotes the maximum strain and E max denotes the maximum electric field. This value is about half that for the lead zirconate titanate-based ceramics that are widely used. However, a comparable value can be obtained by stacking more ceramic layers with smaller thicknesses. In the paper, the compositional design and process used to co-fire lead-free ceramics with nickel inner electrodes are introduced, and their piezoelectric properties and reliabilities are shown. Recent advances are introduced, and future development is discussed.

Temporary ipsilateral stiff shoulder after operative fixation of distal radial fractures.

PubMed

Cha, Soo Min; Shin, Hyun Dae; Hwang, Sung Jin

2017-06-01

This study was conducted to identify variables affecting the development of temporary stiff shoulder after operative fixation for distal radial fractures (DRF). The study retrospectively analyzed 167 patients who had undergone internal fixation using volar locking plate for DRF between 2010 and 2013. Group 1 was denoted as the "normal group," and group 2 was denoted as the "stiff shoulder group." Basic demographic factors evaluated included age, sex, bone mineral density (BMD), and the dominancy. Also investigated were radiologic variables, including concurrent fractures of the styloid process, positive ulnar variances, classification of DRF, and morphologic type of the distal radioulnar joint. Finally, the type of plate, methods used for postoperative protection, and time of union were analyzed. Group 1 consisted of 114 patients, and group 2 consisted of 53 patients. On overall univariate analysis, BMD, hand dominancy, and the protective methods after plating were significantly different between the 2 groups. On multivariate analysis, a lower BMD and injury on the nondominant side were significant factors for shoulder stiffness. Stiffness was significantly higher in patients with a mean BMD < -2.6 than in patients with a mean BMD ≥ -2.6. At the final follow-up, all of the 53 patients in group 2 were relieved of the symptoms of a stiff shoulder. A lower BMD and injury on the nondominant distal radius were distinct factors for the development of a stiff shoulder after operative fixation in DRF. Fortunately, nonoperative treatments, such as stretching exercises/injections, were useful for the relief of these symptoms in the short-term follow-up. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Potassium Sodium Niobate-Based Lead-Free Piezoelectric Multilayer Ceramics Co-Fired with Nickel Electrodes

PubMed Central

Kawada, Shinichiro; Hayashi, Hiroyuki; Ishii, Hideki; Kimura, Masahiko; Ando, Akira; Omiya, Suetake; Kubodera, Noriyuki

2015-01-01

Although lead-free piezoelectric ceramics have been extensively studied, many problems must still be overcome before they are suitable for practical use. One of the main problems is fabricating a multilayer structure, and one solution attracting growing interest is the use of lead-free multilayer piezoelectric ceramics. The paper reviews work that has been done by the authors on lead-free alkali niobate-based multilayer piezoelectric ceramics co-fired with nickel inner electrodes. Nickel inner electrodes have many advantages, such as high electromigration resistance, high interfacial strength with ceramics, and greater cost effectiveness than silver palladium inner electrodes. However, widely used lead zirconate titanate-based ceramics cannot be co-fired with nickel inner electrodes, and silver palladium inner electrodes are usually used for lead zirconate titanate-based piezoelectric ceramics. A possible alternative is lead-free ceramics co-fired with nickel inner electrodes. We have thus been developing lead-free alkali niobate-based multilayer ceramics co-fired with nickel inner electrodes. The normalized electric-field-induced thickness strain (Smax/Emax) of a representative alkali niobate-based multilayer ceramic structure with nickel inner electrodes was 360 pm/V, where Smax denotes the maximum strain and Emax denotes the maximum electric field. This value is about half that for the lead zirconate titanate-based ceramics that are widely used. However, a comparable value can be obtained by stacking more ceramic layers with smaller thicknesses. In the paper, the compositional design and process used to co-fire lead-free ceramics with nickel inner electrodes are introduced, and their piezoelectric properties and reliabilities are shown. Recent advances are introduced, and future development is discussed. PMID:28793646