Equal channel angular extrusion for bulk processing of Fe–Co–2V soft magnetic alloys, part II: Texture analysis and magnetic properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kustas, Andrew B.; Michael, Joseph R.; Susan, Don F.

In Part I, equal channel angular extrusion (ECAE) was demonstrated as a novel, simple-shear deformation process for producing bulk forms of the low ductility Fe–Co–2V (Hiperco 50A®) soft ferromagnetic alloy with refined grain sizes. Microstructures and mechanical properties were discussed. In this Part II contribution, the crystallographic textures and quasi-static magnetic properties of ECAE-processed Hiperco were characterized. The textures were of a simple-shear character defined by partial {110} and <111> fibers inclined relative to the extrusion direction, in agreement with the expectations for simple-shear deformation textures of BCC metals. These textures were observed throughout all processing conditions and only slightlymore » reduced in intensity by subsequent recrystallization heat treatments. Characterization of the magnetic properties revealed a lower coercivity and higher permeability for ECAE-processed Hiperco specimens relative to the conventionally processed and annealed Hiperco bar. In conclusion, the effects of the resultant microstructure and texture on the coercivity and permeability magnetic properties are discussed.« less

The Planning of Change. Third Edition.

ERIC Educational Resources Information Center

Bennis, Warren G., Ed.; And Others

This collection of essays discusses some of the models employed in the analysis of change processes. Part I provides a history of strategies for social change. Part II explores the meaning and use of systems models used to diagnose change situations. Part III deals with the intervention modes, and Part IV explores the dilemmas confronted by agents…

Medical Devices; General Hospital and Personal Use Devices; Classification of the Image Processing Device for Estimation of External Blood Loss. Final order.

PubMed

2017-12-20

The Food and Drug Administration (FDA or we) is classifying the image processing device for estimation of external blood loss into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the image processing device for estimation of external blood loss' classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Recent Economic Perspectives on Political Economy, Part I*

PubMed Central

Dewan, Torun; Shepsle, Kenneth A.

2013-01-01

In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23990686

Part I. improve flame retardant textile. Part II. novel approach layer-by-layer processing for flame retardant textile.

USDA-ARS?s Scientific Manuscript database

In this presentation, new approaches for flame retardant textile by using supercritical carbon dioxide (scCO2) and layer-by-layer processing will be discussed. Due to its environmentally benign character, the scCO2 is considered in green chemistry as a substitute for organic solvents in chemical rea...

How to unlock the benefits of MRP (materiel requirements planning) II and Just-in-Time.

PubMed

Jacobi, M A

1994-05-01

Manufacturing companies need to use the best and most applicable parts of MRP II and JIT to run their businesses effectively. MRP II provides the methodology to plan and control the total resources of the company and focuses on the processes that add value to their customers' products. It is the cornerstone of total quality management, as it reduces the variability and costly activities in the communication and subsequent execution of the required steps from customer order to shipment. JIT focuses on simplifying the total business operation and execution of business processes. MRP II and JIT are the foundations for successful manufacturing businesses.

40 CFR Appendix to Part 240 - Recommended Bibliography

Code of Federal Regulations, 2011 CFR

2011-07-01

... Part 240 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Pt. 240, App. Appendix to Part 240—Recommended Bibliography 1. The Solid Waste Disposal Act as amended; Title II of Pub. L. 89-272, 89th Cong., S. 306, Oct. 20...

Instrumentation: Photodiode Array Detectors in UV-VIS Spectroscopy. Part II.

ERIC Educational Resources Information Center

Jones, Dianna G.

1985-01-01

A previous part (Analytical Chemistry; v57 n9 p1057A) discussed the theoretical aspects of diode ultraviolet-visual (UV-VIS) spectroscopy. This part describes the applications of diode arrays in analytical chemistry, also considering spectroelectrochemistry, high performance liquid chromatography (HPLC), HPLC data processing, stopped flow, and…

Team effort: the nuclear medicine decision making process. Part II.

PubMed

Tsuchiyama, S

1991-06-01

This two part article examines the nuclear medicine purchase of Baptist Memorial Hospital in Memphis, the largest private hospital in the nation. Part I (May 1991) focused on what their needs were. This concluding installment looks at the committee mechanism itself and the reasoning that went behind their decisions.

Part I. Improved flame retardant textiles. Part II. Novel approach to layer-by-layer processing for flame retardant textiles.

USDA-ARS?s Scientific Manuscript database

In this presentation, new approaches for flame retardant textile by using supercritical carbon dioxide (scCO2) and layer-by-layer processing will be discussed. Due to its environmentally benign character, the scCO2 is considered in green chemistry as a substitute for organic solvents in chemical re...

Exploring Innovation Processes from a Complexity Perspective. Part II. Experiences from the Subsea Increased Oil Recovery Case

ERIC Educational Resources Information Center

Aasen, Tone Merethe Berg; Johannessen, Stig

2007-01-01

In this second part of the papers, exploring innovation processes from a complexity perspective, we present an empirical example to strengthen further the relevance of the approach. The example draws on a longitudinal research initiative conducted in cooperation with the Norwegian petroleum company Statoil ASA. We conducted our research into the…

Use of a Process Analysis Tool for Diagnostic Study on Fine Particulate Matter Predictions in the U.S.-Part II: Analysis and Sensitivity Simulations

EPA Science Inventory

Following the Part I paper that described an application of the U.S. EPA Models-3/Community Multiscale Air Quality (CMAQ) modeling system to the 1999 Southern Oxidants Study episode, this paper presents results from process analysis (PA) using the PA tool embedded in CMAQ and s...

The Microcomputerization of Business Schools. Part I: General Strategies, Lessons, and Issues. Part II: A Case Study of the UCLA Graduate School of Management.

ERIC Educational Resources Information Center

Frand, Jason L.

Part I (General Strategies, Lessons and Issues) of this two-part analysis of the microcomputerization process describes strategies schools have followed in their microcomputerization efforts and the lessons and issues that have emerged. Part I covers the following: strategies for introducing microcomputers into the curriculum (the saturation,…

Classroom Demonstrations of Polymer Principles Part II. Polymer Formation.

ERIC Educational Resources Information Center

Rodriguez, F.; And Others

1987-01-01

This is part two in a series on classroom demonstrations of polymer principles. Described is how large molecules can be assembled from subunits (the process of polymerization). Examples chosen include both linear and branched or cross-linked molecules. (RH)

Terrorism Information Sharing and the Nationwide Suspicious Activity Report Initiative: Background and Issues for Congress

DTIC Science & Technology

2009-11-05

December_23_2008_Final.pdf. 46 Ibid. 47 Federated search is the process of performing a simultaneous real-time search of multiple diverse and distributed...sources from a single search page, with the federated search engine acting as intermediary. See Sol Lederman, “A Federated Search Primer, Part II...at http://www.altsearchengines.com/2009/01/12/a- federated - search -primer-part-ii-of- iii/ 48 Examples of this controversy can be found at Alice

Research and Development: A Complex Relationship Part I [and] Part II.

ERIC Educational Resources Information Center

Pollard, John Douglas Edward

Part 1 of this document describes the background, format, and early groundwork that went into the development of a test sponsored entirely by private enterprise. The discipline imposed by a financial bottom line imposes special pressures but also offers new opportunities. This private enterprise model is a multi-constructional process where…

The new production theory for health care through clinical reengineering: a study of clinical guidelines--Part II.

PubMed

Sharp, J R

1995-01-01

In Part I of this two-part article, in the December 1994 issue of the journal, the author discussed the manufacturing theories of Peter Drucker in terms of their applicability for the health care field. He concluded that Drucker's four principles and practices of manufacturing--statistical quality control, manufacturing accounting, modular organization, and systems approach--do have application to the health care system. Clinical guidelines, a variation on the Drucker theory, are a specific example of the manufacturing process in health. The performance to date of some guidelines and their implications for the health care reform debate are discussed in Part II of the article.

Morphological evidence for local microcircuits in rat vestibular maculae

NASA Technical Reports Server (NTRS)

Ross, M. D.

1997-01-01

Previous studies suggested that intramacular, unmyelinated segments of vestibular afferent nerve fibers and their large afferent endings (calyces) on type I hair cells branch. Many of the branches (processes) contain vesicles and are presynaptic to type II hair cells, other processes, intramacular nerve fibers, and calyces. This study used serial section transmission electron microscopy and three-dimensional reconstruction methods to document the origins and distributions of presynaptic processes of afferents in the medial part of the adult rat utricular macula. The ultrastructural research focused on presynaptic processes whose origin and termination could be observed in a single micrograph. Results showed that calyces had 1) vesiculated, spine-like processes that invaginated type I cells and 2) other, elongate processes that ended on type II cells pre- as well as postsynaptically. Intramacular, unmyelinated segments of afferent nerve fibers gave origin to branches that were presynaptic to type II cells, calyces, calyceal processes, and other nerve fibers in the macula. Synapses with type II cells occurred opposite subsynaptic cisternae (C synapses); all other synapses were asymmetric. Vesicles were pleomorphic but were differentially distributed according to process origin. Small, clear-centered vesicles, approximately 40-60 nm in diameter, predominated in processes originating from afferent nerve fibers and basal parts of calyces. Larger vesicles approximately 70-120 nm in diameter having approximately 40-80 nm electron-opaque cores were dominant in processes originating from the necks of calyces. Results are interpreted to indicate the existence of a complex system of intrinsic feedforward (postsynaptic)-feedback (presynaptic) connections in a network of direct and local microcircuits. The morphological findings support the concept that maculae dynamically preprocess linear acceleratory information before its transmission to the central nervous system.

A framework for the continual improvement of behavioral healthcare. Part II--Policy for leadership.

PubMed

Redelheim, P S; Pomeroy, L H; Batalden, P

1994-01-01

In the first part of this article, published in the November/December 1993 issue of Behavioral Healthcare Tomorrow, the authors presented a framework for understanding the process of continuous quality improvement in the behavioral healthcare setting. Four elements of continual improvement were identified: underlying knowledge, policy for leadership, tools and methods, and daily work applications. They showed how traditional professional knowledge of one's subject, discipline and values must be augmented by improvement knowledge--which quality improvement guru W. Edwards Deming calls "the system of profound knowledge." In Part II, they focus on the second element of continual improvement, the importance of organizational leadership.

76 FR 31453 - Special Conditions: Gulfstream Model GVI Airplane; Single-Occupant Side-Facing Seats

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

.... SID TTI data must be processed as defined in Federal Motor Vehicle Safety Standard (FMVSS) part 571...). Pass/fail injury assessments: TTI and pelvic acceleration. 2. One longitudinal test with the Hybrid II... pelvic acceleration. 3. Vertical (14g) test with modified Hybrid II ATDs using existing pass/fail...

40 CFR 65.3 - Compliance with standards and operation and maintenance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...)(4)(i) and (ii) do not apply to Group 2A or Group 2B process vents. Compliance with design, equipment, work practice, and operational standards, including those for equipment leaks, shall be determined... this part. (5) Design, equipment, work practice, or operational standards. Paragraphs (b)(5)(i) and (ii...

Guidelines for implementing automation in a hospital laboratory setting--part II.

PubMed

Rodriques, Sarina

2007-03-28

Laboratories entering into a discussion regarding automation of their facility have a number of key issues that need to be considered right away. What is the financial impact going to be? How do we know which processes we should automate and which ones we shouldn't? Which vendor is going to best align with the goals of our organization? Developing a thorough and robust plan at the start of the automation process is vital to the overall success of the project. It requires dedicated staff members who are willing to do the research, crunch the numbers, and present the data effectively. In Part II of this manuscript, issues such as cost analyses, business plans, and purchasing decisions are each covered thoroughly.

7 CFR 2902.31 - Greases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... using soaps, polymers or other solids, or other thickeners. (2) Greases for which preferred procurement applies are: (i) Food grade greases. Lubricants that are designed for use on food-processing equipment as... parts and equipment in locations in which there is exposure of the lubricated part to food. (ii...

7 CFR 2902.31 - Greases.

Code of Federal Regulations, 2011 CFR

2011-01-01

... using soaps, polymers or other solids, or other thickeners. (2) Greases for which preferred procurement applies are: (i) Food grade greases. Lubricants that are designed for use on food-processing equipment as... parts and equipment in locations in which there is exposure of the lubricated part to food. (ii...

Environmental Compliance Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-02-01

The Guide is intended to assist Department of Energy personnel by providing information on the NEPA process, the processes of other environmental statutes that bear on the NEPA process, the timing relationships between the NEPA process and these other processes, as well as timing relationships between the NEPA process and the development process for policies, programs, and projects. This information should be helpful not only in formulating environmental compliance plans but also in achieving compliance with NEPA and various other environmental statutes. The Guide is divided into three parts with related appendices: Part I provides guidance for developing environmental compliancemore » plans for DOE actions; Part II is devoted to NEPA with detailed flowcharts depicting the compliance procedures required by CEQ regulations and Department of Energy NEPA Guidelines; and Part III contains a series of flowcharts for other Federal environmental requirements that may apply to DOE projects.« less

Insertion and assembly of the precursor of subunit II into the photosystem I complex may precede its processing.

PubMed Central

Cohen, Y; Steppuhn, J; Herrmann, R G; Yalovsky, S; Nechushtai, R

1992-01-01

The biogenesis and assembly of subunit II of photosystem I (PSI) (psaD gene product) were studied and characterized. The precursor and the mature form were produced in vitro and incubated with intact plastids or isolated thylakoids. Following import of the precursor into isolated plastids, mostly the mature form of subunit II was found in the thylakoids. However, when the processing activity was inhibited only the precursor form was present in the membranes. The precursor was processed by a stromal peptidase and processing could occur before or after insertion of the precursor into the thylakoids. Following insertion into isolated thylakoids, both the precursor and the mature form of subunit II were confined to the PSI complex. Insertion of the mature form of subunit II was much less efficient than that of the precursor. Kinetic studies showed that the precursor was inserted into the membrane. Only at a later stage, the mature form began to accumulate. These results suggest that in vivo the precursor of subunit II is inserted and embedded in the thylakoids, as part of the PSI complex. Only later, it is processed to the mature form through the action of a stromal peptidase. Images PMID:1740118

Education and the Brain; The Seventy-seventh Yearbook of the National Society for the Study of Education. Part II.

ERIC Educational Resources Information Center

Chall, Jeanne S., Ed.; Mirsky, Allan F., Ed.

The brain sciences and education is the topic for this yearbook volume, which is divided into five parts. Part one consists of an introduction to the brain sciences that is a primer on the neuroanatomy, neurochemistry, and neurophysiology of the brain. Part two contains chapters on some of the basic processes of the brain: attention, cognition,…

Cavity Processing and Preparation of 650 MHz Elliptical Cell Cavities for PIP-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rowe, Allan; Chandrasekaran, Saravan Kumar; Grassellino, Anna

The PIP-II project at Fermilab requires fifteen 650 MHz SRF cryomodules as part of the 800 MeV LINAC that will provide a high intensity proton beam to the Fermilab neutrino program. A total of fifty-seven high-performance SRF cavities will populate the cryomodules and will operate in both pulsed and continuous wave modes. These cavities will be processed and prepared for performance testing utilizing adapted cavity processing infrastructure already in place at Fermilab and Argonne. The processing recipes implemented for these structures will incorporate state-of-the art processing and cleaning techniques developed for 1.3 GHz SRF cavities for the ILC, XFEL, andmore » LCLS-II projects. This paper describes the details of the processing recipes and associated chemistry, heat treatment, and cleanroom processes at the Fermilab and Argonne cavity processing facilities. This paper also presents single and multi-cell cavity test results with quality factors above 5·10¹⁰ and accelerating gradients above 30 MV/m.« less

76 FR 39443 - National Environmental Policy Act; Santa Susana Field Laboratory

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

... analysis and consultation. These include surveys for wildlife, critical habitat, rare plants, wetlands, and..., Bravo, Coca, and Delta. Area II and the LOX Plant portion of Area I were acquired by NASA from the U.S... Area II and a portion of Area I (LOX Plant) of SSFL. As part of the environmental review process...

Source Physics Experiment Phase II, Dry Alluvium Geology (DAG) Experiments Using Nitromethane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Traeger, Scott R.

Need to provide briefing to the State of Nevada as part of the Permitting process for the Nevada Chemical Accident Prevention Program (CAPP) for use of nitromethane at the NNSS. This document will be accessible to the public as part of the CAPP program.

DIY Soundcard Based Temperature Logging System. Part II: Applications

ERIC Educational Resources Information Center

Nunn, John

2016-01-01

This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes. [For "DIY Soundcard Based Temperature Logging System. Part I: Design," see EJ1114124.

Activated Sludge. Selected Instructional Activities and References. Instructional Resources Monograph Series.

ERIC Educational Resources Information Center

Shepard, Clinton L.; Walasek, James B.

This monograph contains a variety of selected materials related to wastewater treatment and water quality education and instruction. Part I presents a brief discussion of the activated sludge process in wastewater treatment operations. Part II, Instructional Units, contains selected portions of existing programs which may be utilized in…

1992 NACUBO Endowment Study.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

This report presents the results of a 1992 study of the performance and management of college and university endowments. Part I offers succinct information on the data collection process, provides definitions, and explains the formula used in the analysis. Part II presents the report's exhibits in two sections. The first section describes: (1)…

GCC Master Plan, 1988-89.

ERIC Educational Resources Information Center

Germanna Community Coll., Locust Grove, VA.

In 1989, Germanna Community College (GCC) developed this comprehensive master plan to strengthen its planning process. Part I provides an overview of the development of the master plan, the mission statement of the Virginia Community College System (VCCS), and the mission and purpose statements of GCC. Part II summarizes demographic trends based…

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2010 CFR

2010-07-01

... manufacture and processing in the special production area. All manufacturing, processing, and use operations... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part... production area, the ambient air concentration of the new chemical substance during manufacture, processing...

Development of an Integrated, Computer-Based Bibliographical Data System for a Large University Library. Annual Report to the National Science Foundation from the University of Chicago Library, 1966/67.

ERIC Educational Resources Information Center

Fussler, Herman; Payne, Charles T.

Part I is a discussion of the following project tasks: A) development of an on-line, real-time bibliographic data processing system; B) implementation in library operations; C) character sets; D) Project MARC; E) circulation; and F) processing operation studies. Part II is a brief discussion of efforts to work out cooperative library systems…

Connecting the Dots--From Planning to Implementation: Translating Commitments into Action in a Strategic Planning Process

ERIC Educational Resources Information Center

Mieso, Rob Roba

2010-01-01

This study examines the implementation of the Commitments to Action (CTAs) that were developed for the Outreach Institutional Initiative (OII) as part of the 2006 strategic planning process at De Anza College. Although the strategic planning process identified four Institutional Initiatives (IIs) [Outreach, Individualized Attention to Student…

Process-based modeling of temperature and water profiles in the seedling recruitment zone: Part II. Seedling emergence timing

USDA-ARS?s Scientific Manuscript database

Predictions of seedling emergence timing for spring wheat are facilitated by process-based modeling of the microsite environment in the shallow seedling recruitment zone. Hourly temperature and water profiles within the recruitment zone for 60 days after planting were simulated from the process-base...

Technical Information on the Carbonation of the EBR-II Reactor, Summary Report Part 1: Laboratory Experiments and Application to EBR-II Secondary Sodium System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven R. Sherman

Residual sodium is defined as sodium metal that remains behind in pipes, vessels, and tanks after the bulk sodium metal has been melted and drained from such components. The residual sodium has the same chemical properties as bulk sodium, and differs from bulk sodium only in the thickness of the sodium deposit. Typically, sodium is considered residual when the thickness of the deposit is less than 5-6 cm. This residual sodium must be removed or deactivated when a pipe, vessel, system, or entire reactor is permanently taken out of service, in order to make the component or system safer and/ormore » to comply with decommissioning regulations. As an alternative to the established residual sodium deactivation techniques (steam-and-nitrogen, wet vapor nitrogen, etc.), a technique involving the use of moisture and carbon dioxide has been developed. With this technique, sodium metal is converted into sodium bicarbonate by reacting it with humid carbon dioxide. Hydrogen is emitted as a by-product. This technique was first developed in the laboratory by exposing sodium samples to humidified carbon dioxide under controlled conditions, and then demonstrated on a larger scale by treating residual sodium within the Experimental Breeder Reactor II (EBR-II) secondary cooling system, followed by the primary cooling system, respectively. The EBR-II facility is located at the Idaho National Laboratory (INL) in southeastern Idaho, U.S.A. This report is Part 1 of a two-part report. It is divided into three sections. The first section describes the chemistry of carbon dioxide-water-sodium reactions. The second section covers the laboratory experiments that were conducted in order to develop the residual sodium deactivation process. The third section discusses the application of the deactivation process to the treatment of residual sodium within the EBR-II secondary sodium cooling system. Part 2 of the report, under separate cover, describes the application of the technique to residual sodium treatment within the EBR-II primary sodium cooling system and related systems.« less

A State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Drafting (Graphic Communications). Part I--Basic. Part II--Specialty Programs. Section A (Mechanical Drafting and Design). Section B (Architectural Drafting and Design).

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

A two-part articulation instructional objective guide for drafting (graphic communications) is provided. Part I contains summary information on seven blocks (courses) of instruction. They are as follow: introduction; basic technical drafting; problem solving in graphics; reproduction processes; freehand drawing and sketching; graphics composition;…

Coastal Foredune Evolution, Part 1: Environmental Factors and Forcing Processes Affecting Morphological Evolution

DTIC Science & Technology

2017-02-01

ERDC/CHL CHETN-II-56 February 2017 Approved for public release; distribution is unlimited. Coastal Foredune Evolution, Part 1: Environmental... Coastal and Hydraulics Engineering Technical Note (CHETN) is the first of two CHETNs focused on improving technologies to forecast coastal foredune...morphodynamic evolution of coastal foredunes. Part 2 reviews modeling approaches to forecast these changes and develops a probabilistic modeling framework to

31 CFR 25.303 - Closing procedure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Closing procedure. 25.303 Section 25... Closing procedure. (a) FMS loans held by DSAA. (1) After the Treasury has processed Parts I and II of a... person identified in Part V of the prepayment application to establish a Closing Date mutually agreeable...

Focus On Impact for a Profit-Driven Medical Practice. Part II: Six Processes You Can Use to Maximize and Capitalize on the Uniqueness of Your Practice.

PubMed

Lipton-Dibner, Wendy

2015-01-01

This article presents the second part of the proven Focus on Impact strategic model for practice growth. It spotlights six specific processes you can use to maximize and capitalize on the uniqueness of your practice to increase revenues, enhance patient care and service, improve executive team alignment and intra- and interdepartmental teamwork, and dramatically reduce conflict and stress among practice personnel.

No-Oven, No-Autoclave Composite Processing

NASA Technical Reports Server (NTRS)

Rauscher, Michael D.

2015-01-01

Very large composite structures, such as those used in NASA's Space Launch System, push the boundaries imposed by current autoclaves. New technology is needed to maintain composite performance and free manufacturing engineers from the restraints of curing equipment size limitations. Recent efforts on a Phase II project by Cornerstone Research Group, Inc. (CRG), have advanced the technology and manufacturing readiness levels of a unique two-part epoxy resin system. Designed for room-temperature infusion of a dry carbon preform, the system includes a no-heat-added cure that delivers 350 F composite performance in a matter of hours. This no-oven, no-autoclave (NONA) composite processing eliminates part-size constraints imposed by infrastructure and lowers costs by increasing throughput and reducing capital-specific, process-flow bottlenecks. As a result of the Phase II activity, NONA materials and processes were used to make high-temperature composite tooling suitable for further production of carbon-epoxy laminates and honeycomb/ sandwich-structure composites with an aluminum core. The technology platform involves tooling design, resin infusion processing, composite part design, and resin chemistry. The various technology elements are combined to achieve a fully cured part. The individual elements are not unusual, but they are combined in such a way that enables proper management of the heat generated by the epoxy resin during cure. The result is a self-cured carbon/ epoxy composite part that is mechanically and chemically stable at temperatures up to 350 F. As a result of the successful SBIR effort, CRG has launched NONA Composites as a spinoff subsidiary. The company sells resin to end users, fabricates finished goods for customers, and sells composite tooling made with NONA materials and processes to composite manufacturers.

40 CFR 279.12 - Prohibitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 279.82(c). (c) Burning in particular units. Off-specification used oil fuel may be burned for energy... new products, including the component parts of products, by mechanical or chemical processes; (ii...

40 CFR 279.12 - Prohibitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... § 279.82(c). (c) Burning in particular units. Off-specification used oil fuel may be burned for energy... new products, including the component parts of products, by mechanical or chemical processes; (ii...

Advanced Information Processing. Volume I. Student's Materials. Curriculum Improvement Project. Region II.

ERIC Educational Resources Information Center

Stanford, Linda

This course curriculum is intended for use in an advanced information processing course. It builds on the skills developed in the previous information processing course but goes one step further by requiring students to perform in a simulated office environment and improve their decision-making skills. This volume contains two parts of the…

Benchmark matrix and guide: Part II.

PubMed

1991-01-01

In the last issue of the Journal of Quality Assurance (September/October 1991, Volume 13, Number 5, pp. 14-19), the benchmark matrix developed by Headquarters Air Force Logistics Command was published. Five horizontal levels on the matrix delineate progress in TQM: business as usual, initiation, implementation, expansion, and integration. The six vertical categories that are critical to the success of TQM are leadership, structure, training, recognition, process improvement, and customer focus. In this issue, "Benchmark Matrix and Guide: Part II" will show specifically how to apply the categories of leadership, structure, and training to the benchmark matrix progress levels. At the intersection of each category and level, specific behavior objectives are listed with supporting behaviors and guidelines. Some categories will have objectives that are relatively easy to accomplish, allowing quick progress from one level to the next. Other categories will take considerable time and effort to complete. In the next issue, Part III of this series will focus on recognition, process improvement, and customer focus.

Behind the scene with the fathead team: Part II. In-lab flow through exposures and “omics” to complement effects based monitoring in the Duluth-Superior Harbor.

EPA Science Inventory

As part of a research team focused on aquatic toxicity testing using fathead minnows as a model species, this presentation is the second of a three-part series, giving an overview of the types of field and laboratory studies as well as sample processing our team conducts at the U...

Using magnetic levitation for non-destructive quality control of plastic parts.

PubMed

Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

2015-03-04

Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Blade System Design Study. Part II, final project report (GEC).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffin, Dayton A.

2009-05-01

As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract periodmore » began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being used in innovative prototype blades of 9-m and 30-m length, as well as other non-wind related structures.« less

21 CFR 150.160 - Fruit preserves and jams.

Code of Federal Regulations, 2012 CFR

2012-04-01

... added for any processing or packing or canning, or otherwise added to such fruit. (ii) In the case of fruit prepared by the removal, in whole or in part, of pits, seeds, skins, cores, or other parts; the... pits and seeds are removed therefrom; the weight of such fruit, exclusive of the weight of such pits...

21 CFR 150.160 - Fruit preserves and jams.

Code of Federal Regulations, 2013 CFR

2013-04-01

... added for any processing or packing or canning, or otherwise added to such fruit. (ii) In the case of fruit prepared by the removal, in whole or in part, of pits, seeds, skins, cores, or other parts; the... pits and seeds are removed therefrom; the weight of such fruit, exclusive of the weight of such pits...

21 CFR 150.160 - Fruit preserves and jams.

Code of Federal Regulations, 2011 CFR

2011-04-01

... added for any processing or packing or canning, or otherwise added to such fruit. (ii) In the case of fruit prepared by the removal, in whole or in part, of pits, seeds, skins, cores, or other parts; the... pits and seeds are removed therefrom; the weight of such fruit, exclusive of the weight of such pits...

The President's 1978 National Urban Policy Report; A Biennial Report to the Congress Submitted Pursuant to Sections 702 and 703(a), National Urban Policy and New Communities Development Act, as Amended in 1977.

ERIC Educational Resources Information Center

Department of Housing and Urban Development, Washington, DC.

This report describes the process of drawing up a national urban policy, summarizes the views presented at various forums, and sketches much of the data and analyses relied upon by urban policymakers. Part I summarizes the process of American urbanization leading to the emergence of a new stage in urban development. Part II describes changing…

A review of breast tomosynthesis. Part II. Image reconstruction, processing and analysis, and advanced applications

PubMed Central

Sechopoulos, Ioannis

2013-01-01

Many important post-acquisition aspects of breast tomosynthesis imaging can impact its clinical performance. Chief among them is the reconstruction algorithm that generates the representation of the three-dimensional breast volume from the acquired projections. But even after reconstruction, additional processes, such as artifact reduction algorithms, computer aided detection and diagnosis, among others, can also impact the performance of breast tomosynthesis in the clinical realm. In this two part paper, a review of breast tomosynthesis research is performed, with an emphasis on its medical physics aspects. In the companion paper, the first part of this review, the research performed relevant to the image acquisition process is examined. This second part will review the research on the post-acquisition aspects, including reconstruction, image processing, and analysis, as well as the advanced applications being investigated for breast tomosynthesis. PMID:23298127

Assessing ethical problem solving by reasoning rather than decision making.

PubMed

Tsai, Tsuen-Chiuan; Harasym, Peter H; Coderre, Sylvain; McLaughlin, Kevin; Donnon, Tyrone

2009-12-01

The assessment of ethical problem solving in medicine has been controversial and challenging. The purposes of this study were: (i) to create a new instrument to measure doctors' decisions on and reasoning approach towards resolving ethical problems; (ii) to evaluate the scores generated by the new instrument for their reliability and validity, and (iii) to compare doctors' ethical reasoning abilities between countries and among medical students, residents and experts. This study used 15 clinical vignettes and the think-aloud method to identify the processes and components involved in ethical problem solving. Subjects included volunteer ethics experts, postgraduate Year 2 residents and pre-clerkship medical students. The interview data were coded using the instruments of the decision score and Ethical Reasoning Inventory (ERI). The ERI assessed the quality of ethical reasoning for a particular case (Part I) and for an individual globally across all the vignettes (Part II). There were 17 Canadian and 32 Taiwanese subjects. Based on the Canadian standard, the decision scores between Taiwanese and Canadian subjects differed significantly, but made no discrimination among the three levels of expertise. Scores on the ERI Parts I and II, which reflect doctors' reasoning quality, differed between countries and among different levels of expertise in Taiwan, providing evidence of construct validity. In addition, experts had a greater organised knowledge structure and considered more relevant variables in the process of arriving at ethical decisions than did residents or students. The reliability of ERI scores was 0.70-0.99 on Part I and 0.75-0.80 on Part II. Expertise in solving ethical problems could not be differentiated by the decisions made, but could be differentiated according to the reasoning used to make those decisions. The difference between Taiwanese and Canadian experts suggests that cultural considerations come into play in the decisions that are made in the course of providing humane care to patients.

Final Report for Dynamic Models for Causal Analysis of Panel Data. Models for Change in Quantitative Variables, Part III: Estimation from Panel Data. Part II, Chapter 5.

ERIC Educational Resources Information Center

Hannan, Michael T.

This document is part of a series of chapters described in SO 011 759. Addressing the problems of studying change and the change process, the report argues that sociologists should study coupled changes in qualitative and quantitative outcomes (e.g., marital status and earnings). The author presents a model for sociological studies of change in…

Final Report for Dynamic Models for Causal Analysis of Panel Data. Models for Change in Quantitative Variables, Part I Deterministic Models. Part II, Chapter 3.

ERIC Educational Resources Information Center

Hannan, Michael T.

This document is part of a series of chapters described in SO 011 759. Addressing the question of effective models to measure change and the change process, the author suggests that linear structural equation systems may be viewed as steady state outcomes of continuous-change models and have rich sociological grounding. Two interpretations of the…

Continuous quality improvement at work: the first team--Part II.

PubMed

Bolt, B J; Lehany-Trese, A M; Williams, T P

1995-01-01

This second part of a two-part article follows Cape Canaveral Hospital's first continuous quality improvement team through the processes of goal setting, system analysis, data gathering, and problem resolution in the area of patients' assignment to observation status. The team's primary goal was data-driven improvement. As detailed here, the team's solution to improve the use of observation status is both time-efficient and offers opportunities for financial gain.

Strategic planning for hotel operations: The Ritz-Carlton Hotel Company (Part II).

PubMed

Shriver, S J

1993-01-01

The Ritz-Carlton Hotel Company won the Malcolm Baldrige National Quality Award in 1992. One key to its success is its strategic planning process. In this second part of a two-part article, Stephen Shriver concludes his review of the Ritz-Carlton's approach to strategic planning. Shriver begins by outlining some key steps in plan development and goes on to describe how the Ritz-Carlton disseminates, implements, and evaluates the plan.

Part I: Virtual Laboratory versus Traditional Laboratory: Which Is More Effective for Teaching Electrochemistry? Part II: The Green Synthesis of Aurones Using a Deep Eutectic Solvent

ERIC Educational Resources Information Center

Hawkins, Ian C.

2013-01-01

The role of the teaching laboratory in science education has been debated over the last century. The goals and purposes of the laboratory are still debated and while most science educators consider laboratory a vital part of the education process, they differ widely on the purposes for laboratory and what methods should be used to teach…

32 CFR 651.51 - The final phase.

Code of Federal Regulations, 2010 CFR

2010-07-01

... proposed action). (3) The three categories of impacts are as follows: (i) Direct. (ii) Indirect. (iii... through reference to their coverage elsewhere (40 CFR 1501.7(a)(3)). (c) As part of the scoping process...

Waste Water Management and Infectious Disease. Part II: Impact of Waste Water Treatment

ERIC Educational Resources Information Center

Cooper, Robert C.

1975-01-01

The ability of various treatment processes, such as oxidation ponds, chemical coagulation and filtration, and the soil mantle, to remove the agents of infectious disease found in waste water is discussed. The literature concerning the efficiency of removal of these organisms by various treatment processes is reviewed. (BT)

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

Cultural Resources Investigations at Redstone Arsenal, Madison County, Alabama. Volume II.

DTIC Science & Technology

1980-01-01

was an infant or child . Parts of broken pottery vessels were found with two of the burials. I As mentioned above, ceramics were relatively infrequent...ai-j- IL is also due to a certain amiount of I tI ’rt ie 1(a ao -- tilit- iV! t-ri i process does not porn i t an extant I ii tfel to !, -,I) Ip it

The Dendritic Cell Major Histocompatibility Complex II (MHC II) Peptidome Derives from a Variety of Processing Pathways and Includes Peptides with a Broad Spectrum of HLA-DM Sensitivity*

PubMed Central

Clement, Cristina C.; Becerra, Aniuska; Yin, Liusong; Zolla, Valerio; Huang, Liling; Merlin, Simone; Follenzi, Antonia; Shaffer, Scott A.; Stern, Lawrence J.; Santambrogio, Laura

2016-01-01

The repertoire of peptides displayed in vivo by MHC II molecules derives from a wide spectrum of proteins produced by different cell types. Although intracellular endosomal processing in dendritic cells and B cells has been characterized for a few antigens, the overall range of processing pathways responsible for generating the MHC II peptidome are currently unclear. To determine the contribution of non-endosomal processing pathways, we eluted and sequenced over 3000 HLA-DR1-bound peptides presented in vivo by dendritic cells. The processing enzymes were identified by reference to a database of experimentally determined cleavage sites and experimentally validated for four epitopes derived from complement 3, collagen II, thymosin β4, and gelsolin. We determined that self-antigens processed by tissue-specific proteases, including complement, matrix metalloproteases, caspases, and granzymes, and carried by lymph, contribute significantly to the MHC II self-peptidome presented by conventional dendritic cells in vivo. Additionally, the presented peptides exhibited a wide spectrum of binding affinity and HLA-DM susceptibility. The results indicate that the HLA-DR1-restricted self-peptidome presented under physiological conditions derives from a variety of processing pathways. Non-endosomal processing enzymes add to the number of epitopes cleaved by cathepsins, altogether generating a wider peptide repertoire. Taken together with HLA-DM-dependent and-independent loading pathways, this ensures that a broad self-peptidome is presented by dendritic cells. This work brings attention to the role of “self-recognition” as a dynamic interaction between dendritic cells and the metabolic/catabolic activities ongoing in every parenchymal organ as part of tissue growth, remodeling, and physiological apoptosis. PMID:26740625

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

A Process Evaluation of Project Developmental Continuity. Interim Report II, Part A: Program Case Studies. Volume 2.

ERIC Educational Resources Information Center

Spencer, Lynn, Ed.

These 7 case studies are part of a series of documents on the evaluation of Project Developmental Continuity (PDC), a Head Start demonstration program aimed at providing educational and developmental continuity between children's Head Start and primary school experiences. Each case study reviews the planning year at a PDC demonstration site in one…

A Process Evaluation of Project Developmental Continuity. Interim Report II, Part A: Program Case Studies. Volume I.

ERIC Educational Resources Information Center

Spencer, Lynn, Ed.

These 8 case studies are part of a series of documents on the evaluation of Project Developmental Continuity (PDC), a Head Start demonstration program aimed at providing educational and developmental continuity between children's Head Start and primary school experiences. Each case study reviews the planning year at a PDC demonstration site in one…

Facilitating Understanding of the Purine Nucleotide Cycle and the One-Carbon Pool: Part II--Metabolism of the One-Carbon Pool

ERIC Educational Resources Information Center

Arinze, Ifeanyi J.

2005-01-01

Some metabolic processes such as glycolysis, gluconeogenesis, and lipogenesis are readily understood because they are circumscribed in metabolic pathways that have clearly identifiable beginning points, end products, and other features. Other metabolic pathways that do not appear to be straightforward pose difficulties for students. In part I of…

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part II: Low-Velocity Thermal Spray Coatings

NASA Astrophysics Data System (ADS)

Luo, Xiaotao; Smith, Gregory M.; Sampath, Sanjay

2018-02-01

In this two-part study, uniaxial tensile testing was used to evaluate coating/substrate bonding and compared with traditional ASTM C633 bond pull test results for thermal spray (TS) coated steel laminates. In Part I, the rationale, methodology, and applicability of the test to high-velocity TS coatings were demonstrated. In this Part II, the method was investigated for low-velocity TS processes (air plasma spray and arc spray) on equivalent materials. Ni and Ni-5wt.%Al coatings were deposited on steel substrates with three different roughness levels and tested using both uniaxial tensile and ASTM C633 methods. The results indicate the uniaxial tensile approach provides useful information about the nature of the coating/substrate bonding and goes beyond the traditional bond pull test in providing insightful information on the load sharing processes across the interface. Additionally, this proposed methodology alleviates some of the longstanding shortcomings and potentially reduces error associated with the traditional ASTM C633 test. The mechanisms governing the load transfer between the substrate and the coating were investigated, and the influence of Al in the coating material evaluated.

Quality assurance, an administrative means to a managerial end: Part IV.

PubMed

Clark, G B

1992-01-01

This is the fourth and final part of a series of articles on laboratory quality surveillance. Part I addressed the historical background of medical quality assurance. Part II covered surveillance guidelines of the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) and the College of American Pathologists with emphasis on quality assurance (QA) and the ten-step process. Part III focused on the JCAHO transition from QA to quality assessment and improvement. Part IV concludes the series by discussing the systematic identification of quality indicators in the total quality management and continuous quality improvement environment.

40 CFR 279.12 - Prohibitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF USED OIL Applicability § 279.12 Prohibitions. (a) Surface impoundment prohibition... new products, including the component parts of products, by mechanical or chemical processes; (ii...

DIY soundcard based temperature logging system. Part II: applications

NASA Astrophysics Data System (ADS)

Nunn, John

2016-11-01

This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes.

VizieR Online Data Catalog: SNe II light curves & spectra from the CfA (Hicken+, 2017)

NASA Astrophysics Data System (ADS)

Hicken, M.; Friedman, A. S.; Blondin, S.; Challis, P.; Berlind, P.; Calkins, M.; Esquerdo, G.; Matheson, T.; Modjaz, M.; Rest, A.; Kirshner, R. P.

2018-01-01

Since all of the optical photometry reported here was produced as part of the CfA3 and CfA4 processing campaigns, see Hicken+ (2009, J/ApJ/700/331) and Hicken+ (2012, J/ApJS/200/12) for greater details on the instruments, observations, photometry pipeline, calibration, and host-galaxy subtraction used to create the CfA SN II light curves. (8 data files).

Waste Isolation Pilot Plant (WIPP) conceptual design report. Part I: executive summary. Part II: facilities and system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-01

The pilot plant is developed for ERDA low-level contact-handled transuranic waste, ERDA remote-handled intermediate-level transuranic waste, and for high-level waste experiments. All wastes placed in the WIPP arrive at the site processed and packaged; no waste processing is done at the WIPP. All wastes placed into the WIPP are retrievable. The proposed site for WIPP lies 26 miles east of Carlsbad, New Mexico. This document includes the executive summary and a detailed description of the facilities and systems. (DLC)

Service Delivery to the Handicapped: The Role of the Federal Procurement Process. Part II. Selecting Contractors by Competitive Award.

ERIC Educational Resources Information Center

Donaldosn, William S.; Stephens, Thomas M.

1979-01-01

Sections address the RFP/IFB (Request for Proposals/Invitation for Bids) process and procedures for selecting the "best" contract. In reviewing the federal procurement code, and the recent decision of the Government Accounting Office, particularly regarding the NIMIS (National Instructional Materials Information System contract), inconsistencies…

Predictive modeling of infrared radiative heating in tomato dry-peeling process: Part II. Model validation and sensitivity analysis

USDA-ARS?s Scientific Manuscript database

A predictive mathematical model was developed to simulate heat transfer in a tomato undergoing double sided infrared (IR) heating in a dry-peeling process. The aims of this study were to validate the developed model using experimental data and to investigate different engineering parameters that mos...

Military Curricula for Vocational & Technical Education. Metals Processing Specialist, Blocks I and II, Classroom Course 13-5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These curriculum materials are the first section of a four-part, secondary-postsecondary-level course in metals processing. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Block I, Introduction to Oxyacetylene Welding,…

High solid fed-batch butanol fermentation with simultaneous product recovery: part II - process integration.

USDA-ARS?s Scientific Manuscript database

In these studies liquid hot water (LHW) pretreated and enzymatically hydrolyzed Sweet Sorghum Bagasse (SSB) hydrolyzates were fermented in a fed-batch reactor. As reported in the preceding paper, the culture was not able to ferment the hydrolyzate I in a batch process due to presence of high level o...

Writing for publication Part II--The writing process.

PubMed

Clarke, L K

1999-01-01

You have selected a topic, gathered resources, and identified your target audience. The next step is to begin to write and organize your ideas. Initiating the actual writing process can be intimidating, especially for a novice author. This portion of the writing for publication series focuses on helping the writer to organize ideas and get started.

Heat and moisture fluxes within a nighttime maritime stratus cloud during CASP II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gultepe, I.; Issac, G.

Stratus clouds in the lower part of the atmosphere over the ocean or land can play an important role in boundary layer processes and in climate change. Physical, dynamical, and radiative processes within marine stratus clouds on both cloud and regional scale are studied for the first time during the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) (Albrecht et al., 1988). These clouds can effect the nowcasting, pollution transfer, and radiative processes (Nicholls and Leighton, 1986). Similar to the FIRE stratus project, the Canadian Atlantic Storms Program (CASP) II field project was planned to obtain a bettermore » understanding of cloud physical, dynamical, radiative characteristics, and mesoscale structure of Canadian east coast storms. Here the dynamical and microphysical data, and a radiative transfer model are used to better understand a developing nighttime stratus cloud over the ocean during CASP II which took place over Atlantic Canada. Observations collected by the Convair aircraft of the National Research Council (NRC) of Canada during the CASP II field project on February 6, 1991 are presented.« less

Processing and problems in manufacturing a Ti-modified Nb/sub 3/Sn MJR billet. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, W.K.; Smathers, D.; Geno, J.D.

1985-06-18

This report is submitted to complete Task II of University of California Order Number 4321405. Task I had Teledyne Wah Chang Albany (TWCA) assemble and process by the Modified Jelly Roll (MJR) method a Ti-modified Nb/sub 3/Sn superconductor billet. This billet was identified as M103 by TWCA. The billet matrix is nominally composed of copper 13.5 wt % tin bronze sheet and niobium 1.2 wt % titanium expanded metal with a volume ratio of three parts bronze to one part niobium alloy. All processing steps and problems encountered in manufacturing billet M103 are described in this report.

40 CFR 52.2465 - Original identification of plan section.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 2FSD, and pre-dryer 3FSD from Part IV, Rule EX-4, Section 4.41(i) until December 15, 1981, submitted on...) Appendix K (7) Appendix N (8) Appendix P (9) Appendix R I., II.B., II.D., II.E., II.F., II.G., II.H., II.I...) Amendments to Part I, Subpart 1.01 (Certain Terms Defined) and to Part IV, Section 4.52 (former Section 4.705...

Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

NASA Astrophysics Data System (ADS)

Brunner, Robert

2014-04-01

In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

Born to run: control of transcription elongation by RNA polymerase II.

PubMed

Chen, Fei Xavier; Smith, Edwin R; Shilatifard, Ali

2018-05-08

The dynamic regulation of transcription elongation by RNA polymerase II (Pol II) is an integral part of the implementation of gene expression programmes during development. In most metazoans, the majority of transcribed genes exhibit transient pausing of Pol II at promoter-proximal regions, and the release of Pol II into gene bodies is controlled by many regulatory factors that respond to environmental and developmental cues. Misregulation of the elongation stage of transcription is implicated in cancer and other human diseases, suggesting that mechanistic understanding of transcription elongation control is therapeutically relevant. In this Review, we discuss the features, establishment and maintenance of Pol II pausing, the transition into productive elongation, the control of transcription elongation by enhancers and by factors of other cellular processes, such as topoisomerases and poly(ADP-ribose) polymerases (PARPs), and the potential of therapeutic targeting of the elongation stage of transcription by Pol II.

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part 504—Fuel Price Computation (a) Introduction. This appendix provides the equations and parameters...

40 CFR Appendix II to Part 1048 - Large Spark-ignition (SI) Composite Transient Cycle

Code of Federal Regulations, 2010 CFR

2010-07-01

... Transient Cycle II Appendix II to Part 1048 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY.... 1048, App. II Appendix II to Part 1048—Large Spark-ignition (SI) Composite Transient Cycle The following table shows the transient duty-cycle for engines that are not constant-speed engines, as described...

Modeling adsorption of copper(II), cobalt(II) and nickel(II) metal ions from aqueous solution onto a new carboxylated sugarcane bagasse. Part II: Optimization of monocomponent fixed-bed column adsorption.

PubMed

Xavier, Amália Luísa Pedrosa; Adarme, Oscar Fernando Herrera; Furtado, Laís Milagres; Ferreira, Gabriel Max Dias; da Silva, Luis Henrique Mendes; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius Alves

2018-04-15

In the second part of this series of studies, the monocomponent adsorption of Cu 2+ , Co 2+ and Ni 2+ onto STA adsorbent in a fixed-bed column was investigated and optimized using a 2 2 central composite design. The process variables studied were: initial metal ion concentration and spatial time, and the optimized responses were: adsorption capacity of the bed (Q max ), efficiency of the adsorption process (EAP), and effective use of the bed (H). The higher Q max for Cu 2+ , Co 2+ and Ni 2+ were 1.060, 0.800 and 1.029 mmol/g, respectively. The breakthrough curves were modeled by the original Thomas and Bohart-Adams models. The changes in enthalpy (Δ ads H°) of adsorption of the metal ions onto STA were determined by isothermal titration calorimetry (ITC). The values of Δ ads H° were in the range of 3.0-6.8 kJ/mol, suggesting that the adsorption process involved physisorption. Desorption (E des ) and re-adsorption (E re-ads ) of metal ions from the STA adsorbent were also investigated in batch mode, and the optimum conditions were applied for three cycles of adsorption/desorption in a fixed bed column. For these cycles, the lowest values of E des and E re-ads were 95 and 92.3%, respectively, showing that STA is a promising candidate for real applications on a large scale. Copyright © 2018 Elsevier Inc. All rights reserved.

40 CFR Appendix II to Part 261 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false [Reserved] II Appendix II to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix II to Part 261 [Reserved] ...

The International Apostolate of Jesuit Education: Recent Developments and Contemporary Challenges

ERIC Educational Resources Information Center

Mesa, Jose

2013-01-01

Jesuit education has gone to a renewal process in recent decades as a response to the Vatican Council II and the Society of Jesus's own call for renovation. This process has been conceived as part of our living tradition that began with the "Ratio Studiorum" and the opening of many schools and universities through the world in the late…

Survey Instrument Validity Part II: Validation of a Survey Instrument Examining Athletic Trainers' Knowledge and Practice Beliefs Regarding Exertional Heat Stroke

ERIC Educational Resources Information Center

Burton, Laura J.; Mazerolle, Stephanie M.

2011-01-01

Objective: The purpose of this article is to discuss the process of developing and validating an instrument to investigate an athletic trainer's attitudes and behaviors regarding the recognition and treatment of exertional heat stroke. Background: Following up from our initial paper, which discussed the process of survey instrument design and…

Problem solving strategies integrated into nursing process to promote clinical problem solving abilities of RN-BSN students.

PubMed

Wang, Jing-Jy; Lo, Chi-Hui Kao; Ku, Ya-Lie

2004-11-01

A set of problem solving strategies integrated into nursing process in nursing core courses (PSNP) was developed for students enrolled in a post-RN baccalaureate nursing program (RN-BSN) in a university in Taiwan. The purpose of this study, therefore, was to evaluate the effectiveness of PSNP on students' clinical problem solving abilities. The one-group post-test design with repeated measures was used. In total 114 nursing students with 47 full-time students and 67 part-time students participated in this study. The nursing core courses were undertaken separately in three semesters. After each semester's learning, students would start their clinical practice, and were asked to submit three written nursing process recordings during each clinic. Assignments from the three practices were named post-test I, II, and III sequentially, and provided the data for this study. The overall score of problem solving indicated that score on the post-test III was significantly better than that on post-test I and II, meaning both full-time and part-time students' clinical problem solving abilities improved at the last semester. In conclusion, problem-solving strategies integrated into nursing process designed for future RN-BSN students are recommendable.

Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects.

PubMed

Scarlett, Nicola Vivienne Yorke; Tyson, Peter; Fraser, Darren; Mayo, Sheridan; Maksimenko, Anton

2016-07-01

Synchrotron X-ray tomography (SXRT) has been applied to the study of defects within three-dimensional printed titanium parts. These parts were made using the Arcam EBM(®) (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V) as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. The samples represent a selection of complex shapes with a variety of internal morphologies. Inspection via SXRT has revealed a number of defects which may not otherwise have been seen. The location and nature of such defects combined with detailed knowledge of the process conditions can contribute to understanding the interplay between design and manufacturing strategy. This fundamental understanding may subsequently be incorporated into process modelling, prediction of properties and the development of robust methodologies for the production of defect-free parts.

40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... (APXi). If an alternate fuel other than coal is proposed the source or the derivation of the index must...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

Producing thin strips by twin-roll casting—part I: Process aspects and quality issues

NASA Astrophysics Data System (ADS)

Li, Ben Q.

1995-05-01

This two-part paper discusses recent advances in research and development for the direct production of coilable thin strips by twin-roll casting in both the aluminum and steel industries. While the former is empowering the casters to approach the theoretical productivity limit, the latter is striving to put pilot casters into commercial operation. These intensive R&D efforts are derived from the advantages, both economic and metallurgical, offered by the process. As twin-roll casting combines solidification and hot rolling into a single operation, the process requires low capital investment and low operational cost. Also, because of the high solidification rate attained in the process, the thin strips produced have a refined metallurgical structure, characterized by columnar and equiaxed zones with fine intermetallic particles. The enthusiasm about twin-roll casting is now being spread worldwide. This paper focuses on the process aspects and quality control of twin-roll casting. Part II, which will appear in the August issue, will review process modeling and pilot-plant development activities.

Role transition from caregiver to case manager--Part II.

PubMed

Schmitt, Nancy

2006-01-01

This two-part article explores the process of role transition as it pertains to nurses moving from roles of caregivers to roles of case managers. Part 1 of the article presented a theoretical model that demonstrated the interplay of significant factors in the process of role transition and discussed how this model could be used to examine nurses' experience of this transition. Part 2 presents findings from a qualitative study involving interview and focus group data contributed by nurses who have made the transition from caregiver to case manager. Data point to specific tensions experienced by these nurses, which are associated with time-task orientation, interactions and relationships, business culture and objectives, and self-image and professional identity. Recommendations for preparing and supporting nurses through this role are also offered.

Managing an Academic Library. Parts I and II.

ERIC Educational Resources Information Center

Werner, Gloria; Brudvig, Glenn

1985-01-01

Describes management experiences at University of California--Los Angeles (UCLA), University of Minnesota Biomedical Library, and California Institute of Technology. Discussions include development of ORION (UCLA's online technical processing and information system); organizational changes occurring as result of large-scale automation;…

Researching Political Education Programmes in Schools and Colleges: Part II.

ERIC Educational Resources Information Center

Allen, Garth

1979-01-01

Introduces findings from an investigation of political education in schools and colleges in the United Kingdom. It focuses on describing and analyzing political learning processes, political socialization, political learning experiences in the classroom, and problems which beset political education programs. (DB)

Michigan Department of Transportation state planning and research part II program : research and implementation manual [revised June 2014].

DOT National Transportation Integrated Search

2014-06-01

The Research and Implementation Manual describes the administrative processes used by : Research Administration to develop and implement the Michigan Department of Transportation : (MDOT) research program. Contents of this manual include a discussion...

Certification of the European Reference Soil Set (IRMM-443--EUROSOILS). Part II. Soil-pH in suspensions of water and CaCl2.

PubMed

Gawlik, B M; Lamberty, A; Pauwels, J; Blum, W E H; Mentler, A; Bussian, B; Eklo, O; Fox, K; Kördel, W; Hennecke, D; Maurer, T; Perrin-Ganier, C; Romero-Taboada, E; Szabo, G; Muntau, H

2003-08-01

IRMM-443 re-groups a set of six European Reference Soils (EUROSOILS), which had been certified for their adsorption coefficients for atrazine, 2,4-D and lindane (Certification of the European Reference Soil Set (IRMM-443-EUROSOILS)-Part I. Adsorption coefficients for atrazine, 2,4-D and lindane. Sci Total Environ, in press). The certification of these parameters was complemented by an additional certification of pH in suspension as well by the determination of indicative values for total nitrogen, organic and total carbon content. While Part I explained the principles of the value assignment process and discussed their application to the adsorption coefficients, Part II presents the certified values for pH as well as the indicative values for N(tot), C(tot) and C(org). In addition, the assessment of uncertainty components for stability and homogeneity, which have been included in the final uncertainty budget, is discussed.

The Tölz Temporal Topography Study: mapping the visual field across the life span. Part II: cognitive factors shaping visual field maps.

PubMed

Poggel, Dorothe A; Treutwein, Bernhard; Calmanti, Claudia; Strasburger, Hans

2012-08-01

Part I described the topography of visual performance over the life span. Performance decline was explained only partly by deterioration of the optical apparatus. Part II therefore examines the influence of higher visual and cognitive functions. Visual field maps for 95 healthy observers of static perimetry, double-pulse resolution (DPR), reaction times, and contrast thresholds, were correlated with measures of visual attention (alertness, divided attention, spatial cueing), visual search, and the size of the attention focus. Correlations with the attentional variables were substantial, particularly for variables of temporal processing. DPR thresholds depended on the size of the attention focus. The extraction of cognitive variables from the correlations between topographical variables and participant age substantially reduced those correlations. There is a systematic top-down influence on the aging of visual functions, particularly of temporal variables, that largely explains performance decline and the change of the topography over the life span.

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

Tunable, Flexible and Efficient Optimization of Control Pulses for Superconducting Qubits, part II - Applications

NASA Astrophysics Data System (ADS)

AsséMat, Elie; Machnes, Shai; Tannor, David; Wilhelm-Mauch, Frank

In part I, we presented the theoretic foundations of the GOAT algorithm for the optimal control of quantum systems. Here in part II, we focus on several applications of GOAT to superconducting qubits architecture. First, we consider a control-Z gate on Xmons qubits with an Erf parametrization of the optimal pulse. We show that a fast and accurate gate can be obtained with only 16 parameters, as compared to hundreds of parameters required in other algorithms. We present numerical evidences that such parametrization should allow an efficient in-situ calibration of the pulse. Next, we consider the flux-tunable coupler by IBM. We show optimization can be carried out in a more realistic model of the system than was employed in the original study, which is expected to further simplify the calibration process. Moreover, GOAT reduced the complexity of the optimal pulse to only 6 Fourier components, composed with analytic wrappers.

[Bayesian statistics in medicine -- part II: main applications and inference].

PubMed

Montomoli, C; Nichelatti, M

2008-01-01

Bayesian statistics is not only used when one is dealing with 2-way tables, but it can be used for inferential purposes. Using the basic concepts presented in the first part, this paper aims to give a simple overview of Bayesian methods by introducing its foundation (Bayes' theorem) and then applying this rule to a very simple practical example; whenever possible, the elementary processes at the basis of analysis are compared to those of frequentist (classical) statistical analysis. The Bayesian reasoning is naturally connected to medical activity, since it appears to be quite similar to a diagnostic process.

Planning and conducting meetings effectively, part I: planning a meeting.

PubMed

Harolds, Jay

2011-12-01

Meetings are held by leaders for many purposes, including conveying information, raising morale, asking for opinions, brain storming, making people part of the problem-solving process, building trust, getting to a consensus, and making decisions. However, many meetings waste time, some undermine the leader's power, and some decrease morale. Part I of this series of articles gives some tips on basic planning for decision-making meetings. Part II of this series of articles analyzes selected components of decision-making meetings. Part III of this series will be on how the chairperson keeps decision-making meetings on track to make them efficient and productive.

The r-process Pattern of a Bright, Highly r-process-enhanced Metal-poor Halo Star at [Fe/H] ∼ ‑2

NASA Astrophysics Data System (ADS)

Sakari, Charli M.; Placco, Vinicius M.; Hansen, Terese; Holmbeck, Erika M.; Beers, Timothy C.; Frebel, Anna; Roederer, Ian U.; Venn, Kim A.; Wallerstein, George; Davis, Christopher Evan; Farrell, Elizabeth M.; Yong, David

2018-02-01

A high-resolution spectroscopic analysis is presented for a new highly r-process-enhanced ([Eu/Fe] = 1.27, [Ba/Eu] = ‑0.65), very metal-poor ([Fe/H] = ‑2.09), retrograde halo star, RAVE J153830.9–180424, discovered as part of the R-Process Alliance survey. At V = 10.86, this is the brightest and most metal-rich r-II star known in the Milky Way halo. Its brightness enables high-S/N detections of a wide variety of chemical species that are mostly created by the r-process, including some infrequently detected lines from elements like Ru, Pd, Ag, Tm, Yb, Lu, Hf, and Th, with upper limits on Pb and U. This is the most complete r-process census in a very metal-poor r-II star. J1538–1804 shows no signs of s-process contamination, based on its low [Ba/Eu] and [Pb/Fe]. As with many other r-process-enhanced stars, J1538–1804's r-process pattern matches that of the Sun for elements between the first, second, and third peaks, and does not exhibit an actinide boost. Cosmo-chronometric age-dating reveals the r-process material to be quite old. This robust main r-process pattern is a necessary constraint for r-process formation scenarios (of particular interest in light of the recent neutron star merger, GW170817), and has important consequences for the origins of r-II stars. Additional r-I and r-II stars will be reported by the R-Process Alliance in the near future.

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

Time frequency analysis of olfactory induced EEG-power change.

PubMed

Schriever, Valentin Alexander; Han, Pengfei; Weise, Stefanie; Hösel, Franziska; Pellegrino, Robert; Hummel, Thomas

2017-01-01

The objective of the present study was to investigate the usefulness of time-frequency analysis (TFA) of olfactory-induced EEG change with a low-cost, portable olfactometer in the clinical investigation of smell function. A total of 78 volunteers participated. The study was composed of three parts where olfactory stimuli were presented using a custom-built olfactometer. Part I was designed to optimize the stimulus as well as the recording conditions. In part II EEG-power changes after olfactory/trigeminal stimulation were compared between healthy participants and patients with olfactory impairment. In Part III the test-retest reliability of the method was evaluated in healthy subjects. Part I indicated that the most effective paradigm for stimulus presentation was cued stimulus, with an interstimulus interval of 18-20s at a stimulus duration of 1000ms with each stimulus quality presented 60 times in blocks of 20 stimuli each. In Part II we found that central processing of olfactory stimuli analyzed by TFA differed significantly between healthy controls and patients even when controlling for age. It was possible to reliably distinguish patients with olfactory impairment from healthy individuals at a high degree of accuracy (healthy controls vs anosmic patients: sensitivity 75%; specificity 89%). In addition we could show a good test-retest reliability of TFA of chemosensory induced EEG-power changes in Part III. Central processing of olfactory stimuli analyzed by TFA reliably distinguishes patients with olfactory impairment from healthy individuals at a high degree of accuracy. Importantly this can be achieved with a simple olfactometer.

14 CFR 417.111 - Launch plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... controls identified by a launch operator's ground safety analysis and implementation of the ground safety.... (ii) For each toxic propellant, any hazard controls and process constraints determined under the... classification and compatibility group as defined by part 420 of this chapter. (3) A graphic depiction of the...

75 FR 29507 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

... of Commodities for Foreign Donation. OMB Control Number: 0560-0258. Summary of Collection: 7 CFR part 1496, Procurement of Processed Agricultural Commodities for Donation under Title II, Public Law 480 is... Credit Corporation (CCC) for donation overseas under various food aid authorities. The information...

Michigan Department of Transportation state planning and research part II program : research and implementation manual [revision 3: October 2015].

DOT National Transportation Integrated Search

2015-01-01

The Research and Implementation Manual describes the administrative processes used by Research Administration to develop and implement the Michigan Department of Transportation (MDOT) research program. Contents of this manual include a discussion of ...

Tracking cotton fiber quality throughout a stipper harvester: Part II

USDA-ARS?s Scientific Manuscript database

Cotton fiber quality begins to degrade naturally with the opening of the boll and mechanical harvesting processes are perceived to exacerbate fiber degradation. Previous research indicates that stripper harvested cotton generally has lower fiber quality and higher foreign matter content than picker ...

Mississippi Department of Transportation Research Division peer exchange II final report : September 24-26, 2002.

DOT National Transportation Integrated Search

2009-01-01

A peer exchange can discuss general research management, or the agency can focus on certain parts of the research process. MDOT chose to focus on four themes: 1) Current Research Organization, 2) Identifying improvements That Streamline the Research ...

Improving the two-step remediation process for CCA-treated wood. Part II, Evaluating bacterial nutrient sources

Treesearch

Carol A. Clausen

2004-01-01

Remediation processes for recovery and reuse of chromated-copper-arsenate-(CCA) treated wood are not gaining wide acceptance because they are more expensive than landfill disposal. One reason is the high cost of the nutrient medium used to culture the metal tolerant bacterium, Bacillus licheniformis, which removes 70-100% of the copper, chromium, and arsenic from CCA-...

40 CFR 63.1034 - Closed vent systems and control devices; or emissions routed to a fuel gas system or process...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Closed vent systems and control devices; or emissions routed to a fuel gas system or process standards. 63.1034 Section 63.1034 Protection... stringent. The 20 parts per million by volume standard is not applicable to the provisions of § 63.1016. (ii...

40 CFR 63.1034 - Closed vent systems and control devices; or emissions routed to a fuel gas system or process...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Closed vent systems and control devices; or emissions routed to a fuel gas system or process standards. 63.1034 Section 63.1034 Protection... stringent. The 20 parts per million by volume standard is not applicable to the provisions of § 63.1016. (ii...

Tensegrity II. How structural networks influence cellular information processing networks

NASA Technical Reports Server (NTRS)

Ingber, Donald E.

2003-01-01

The major challenge in biology today is biocomplexity: the need to explain how cell and tissue behaviors emerge from collective interactions within complex molecular networks. Part I of this two-part article, described a mechanical model of cell structure based on tensegrity architecture that explains how the mechanical behavior of the cell emerges from physical interactions among the different molecular filament systems that form the cytoskeleton. Recent work shows that the cytoskeleton also orients much of the cell's metabolic and signal transduction machinery and that mechanical distortion of cells and the cytoskeleton through cell surface integrin receptors can profoundly affect cell behavior. In particular, gradual variations in this single physical control parameter (cell shape distortion) can switch cells between distinct gene programs (e.g. growth, differentiation and apoptosis), and this process can be viewed as a biological phase transition. Part II of this article covers how combined use of tensegrity and solid-state mechanochemistry by cells may mediate mechanotransduction and facilitate integration of chemical and physical signals that are responsible for control of cell behavior. In addition, it examines how cell structural networks affect gene and protein signaling networks to produce characteristic phenotypes and cell fate transitions during tissue development.

Methods for Fault Detection, Diagnostics and Prognostics for Building Systems - A Review Part II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katipamula, Srinivas; Brambley, Michael R.

This paper provides the second part of an overview of fault detection, diagnostics, and prognostics (FDD&P) starting with descriptions of the fundamental processes and some important definitions. This is followed by a review of FDD&P research in the HVAC&R field, and the paper concludes with discussions of the current state of applications in buildings and likely contributions to operating and maintaining buildings in the future.

Computer Assistance in Information Work. Part I: Conceptual Framework for Improving the Computer/User Interface in Information Work. Part II: Catalog of Acceleration, Augmentation, and Delegation Functions in Information Work.

ERIC Educational Resources Information Center

Paisley, William; Butler, Matilda

This study of the computer/user interface investigated the role of the computer in performing information tasks that users now perform without computer assistance. Users' perceptual/cognitive processes are to be accelerated or augmented by the computer; a long term goal is to delegate information tasks entirely to the computer. Cybernetic and…

Optimizing Vacuum Assisted Resin Transfer Moulding (VARTM) Processing Parameters to Improve Part Quality

NASA Astrophysics Data System (ADS)

Polowick, Christopher

The Low Cost Composites (LCC) group at Carleton University is studying out-of-autoclave composite manufacturing processes such as Vacuum Assisted Resin Transfer Moulding (VARTM) and Closed Cavity Bag Moulding (CCBM). These processes are used to produce inexpensive and high performance components for the GeoSurv II, an Unmanned Aerial Vehicle (UAV) being developed at Carleton University. This research has focused on optimizing VARTM processing parameters to reduce the weight and improve the strength and surface finish of GeoSurv II composite components. A simulation was developed to model resin flow through in VARTM infusions and was used to simulate mould filling and resin emptying of the GeoSurv II inverted V-empennage and mission avionics hatch. The resin infusion schemes of these parts were designed to ensure full preform resin saturation, and minimize thickness variations. An experimental study of the effects of the presence of a corner on composite thickness, void content, and strength was conducted. It was found that inside corners result in local increases in thickness and void content due to poor preform compaction. A novel bagging technique was developed to improve corner compaction, and this technique was shown to reduce thickness variability and void content. The strength, void content, and thickness variation were found to be heavily dependent on corner radius, with corner radii greater than 6.4 mm displaying the greatest improvement in performance for the layups considered. The design of the empennage and hatch mould incorporated the results of this study to improve the quality of these components.

Electronic Noise and Fluctuations in Solids

NASA Astrophysics Data System (ADS)

Kogan, Sh.

2008-07-01

Preface; Part I. Introduction. Some Basic Concepts of the Theory of Random Processes: 1. Probability density functions. Moments. Stationary processes; 2. Correlation function; 3. Spectral density of noise; 4. Ergodicity and nonergodicity of random processes; 5. Random pulses and shot noise; 6. Markov processes. General theory; 7. Discrete Markov processes. Random telegraph noise; 8. Quasicontinuous (Diffusion-like) Markov processes; 9. Brownian motion; 10. Langevin approach to the kinetics of fluctuations; Part II. Fluctuation-Dissipation Relations in Equilibrium Systems: 11. Derivation of fluctuation-dissipation relations; 12. Equilibrium noise in quasistationary circuits. Nyquist theorem; 13. Fluctuations of electromagnetic fields in continuous media; Part III. Fluctuations in Nonequilibrium Gases: 14. Some basic concepts of hot-electrons' physics; 15. Simple model of current fluctuations in a semiconductor with hot electrons; 16. General kinetic theory of quasiclassical fluctuations in a gas of particles. The Boltzmann-Langevin equation; 17. Current fluctuations and noise temperature; 18. Current fluctuations and diffusion in a gas of hot electrons; 19. One-time correlation in nonequilibrium gases; 20. Intervalley noise in multivalley semiconductors; 21. Noise of hot electrons emitting optical phonons in the streaming regime; 22. Noise in a semiconductor with a postbreakdown stable current filament; Part IV. Generation-recombination noise: 23. G-R noise in uniform unipolar semiconductors; 24. Noise produced by recombination and diffusion; Part V. Noise in quantum ballistic systems: 25. Introduction; 26. Equilibrium noise and shot noise in quantum conductors; 27. Modulation noise in quantum point contacts; 28. Transition from a ballistic conductor to a macroscopic one; 29. Noise in tunnel junctions; Part VI. Resistance noise in metals: 30. Incoherent scattering of electrons by mobile defects; 31. Effect of mobile scattering centers on the electron interference pattern; 32. Fluctuations of the number of diffusing scattering centers; 33. Temperature fluctuations and the corresponding noise; Part VII. Noise in strongly disordered conductors: 34. Basic ideas of the percolation theory; 35. Resistance fluctuations in percolation systems. 36. Experiments; Part VIII. Low-frequency noise with an 1/f-type spectrum and random telegraph noise: 37. Introduction; 38. Some general properties of 1/f noise; 39. Basic models of 1/f noise; 40./f noise in metals; 41. Low-frequency noise in semiconductors; 42. Magnetic noise in spin glasses and some other magnetic systems; 43. Temperature fluctuations as a possible source of 1/f noise; 44. Random telegraph noise; 45. Fluctuations with 1/f spectrum in other systems; 46. General conclusions on 1/f noise; Part IX. Noise in Superconductors and Superconducting Structures: 47. Noise in Josephson junctions; 48. Noise in type II superconductors; References; Subject index.

SOLVENT-BASED TO WATERBASED ADHESIVE-COATED SUBSTRATE RETROFIT - VOLUME II: PROCESS OVERVIEW

EPA Science Inventory

This volume presents initial results of a study to identify the issues and barriers associated with retrofitting existing solvent-based equipment to accept waterbased adhesives as part of an EPA effort to improve equipment cleaning in the coated and laminated substrate manufactur...

42 CFR 423.32 - Enrollment process.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the following occurs: (i) The individual successfully enrolls in another PDP or MA-PD plan; (ii) The... as of January 1, 2006, and receive Part D benefits offered by that plan until one of the conditions... implement passive enrollment procedures. (1) Passive enrollment procedures. Individuals will be considered...

42 CFR 423.32 - Enrollment process.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the following occurs: (i) The individual successfully enrolls in another PDP or MA-PD plan; (ii) The... as of January 1, 2006, and receive Part D benefits offered by that plan until one of the conditions... implement passive enrollment procedures. (1) Passive enrollment procedures. Individuals will be considered...

42 CFR 423.32 - Enrollment process.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the following occurs: (i) The individual successfully enrolls in another PDP or MA-PD plan; (ii) The... as of January 1, 2006, and receive Part D benefits offered by that plan until one of the conditions... implement passive enrollment procedures. (1) Passive enrollment procedures. Individuals will be considered...

Use of bovine catalase and manganese dioxide for elimination of hydrogen peroxide from partly oxidized aqueous solutions of aromatic molecules - Unexpected complications

NASA Astrophysics Data System (ADS)

Kovács, Krisztina; Sági, Gyuri; Takács, Erzsébet; Wojnárovits, László

2017-10-01

Being a toxic substance, hydrogen peroxide (H2O2) formed during application of advanced oxidation processes disturbs the biological assessment of the treated solutions. Therefore, its removal is necessary when the concentration exceeds the critical level relevant to the biological tests. In this study, H2O2 removal was tested using catalase enzyme or MnO2 as catalysts and the concentration changes were measured by the Cu(II)/phenanthroline method. MnO2 and Cu(II) were found to react not only with H2O2 but also with the partly oxidized intermediates formed in the hydroxyl radical induced degradation of aromatic antibiotic and pesticide compounds. Catalase proved to be a milder oxidant, it did not show significant effects on the composition of organic molecules. The Cu(II)/phenanthroline method gives the correct H2O2 concentration only in the absence of easily oxidizable compounds, e.g. certain phenol type molecules.

Studies on Hot-Melt Prepregging on PRM-II-50 Polyimide Resin with Graphite Fibers

NASA Technical Reports Server (NTRS)

Shin, E. Eugene; Sutter, James K.; Juhas, John; Veverka, Adrienne; Klans, Ojars; Inghram, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Zoha, John; Bubnick, Jim

2004-01-01

A second generation PMR (in situ Polymerization of Monomer Reactants) polyimide resin PMR-II-50, has been considered for high temperature and high stiffness space propulsion composites applications for its improved high temperature performance. As part of composite processing optimization, two commercial prepregging methods: solution vs. hot-melt processes were investigated with M40J fabrics from Toray. In a previous study a systematic chemical, physical, thermal and mechanical characterization of these composites indicated the poor resin-fiber interfacial wetting, especially for the hot-melt process, resulted in poor composite quality. In order to improve the interfacial wetting, optimization of the resin viscosity and process variables were attempted in a commercial hot-melt prepregging line. In addition to presenting the results from the prepreg quality optimization trials, the combined effects of the prepregging method and two different composite cure methods, i.e. hot press vs. autoclave on composite quality and properties are discussed.

Studies on Hot-Melt Prepregging of PMR-II-50 Polyimide Resin with Graphite Fibers

NASA Technical Reports Server (NTRS)

Shin, E. Eugene; Sutter, James K.; Juhas, John; Veverka, Adrienne; Klans, Ojars; Inghram, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Zoha, John; Bubnick, Jim

2003-01-01

A Second generation PMR (in situ Polymerization of Monomer Reactants) polyimide resin, PMR-II-50, has been considered for high temperature and high stiffness space propulsion composites applications for its improved high temperature performance. As part of composite processing optimization, two commercial prepregging methods: solution vs. hot-melt processes were investigated with M40J fabrics from Toray. In a previous study a systematic chemical, physical, thermal and mechanical characterization of these composites indicated that poor resin-fiber interfacial wetting, especially for the hot-melt process, resulted in poor composite quality. In order to improve the interfacial wetting, optimization of the resin viscosity and process variables were attempted in a commercial hot-melt prepregging line. In addition to presenting the results from the prepreg quality optimization trials, the combined effects of the prepregging method and two different composite cure methods, i.e., hot press vs. autoclave on composite quality and properties are discussed.

Simulating neutron star mergers as r-process sources in ultrafaint dwarf galaxies

NASA Astrophysics Data System (ADS)

Safarzadeh, Mohammadtaher; Scannapieco, Evan

2017-10-01

To explain the high observed abundances of r-process elements in local ultrafaint dwarf (UFD) galaxies, we perform cosmological zoom simulations that include r-process production from neutron star mergers (NSMs). We model star formation stochastically and simulate two different haloes with total masses ≈108 M⊙ at z = 6. We find that the final distribution of [Eu/H] versus [Fe/H] is relatively insensitive to the energy by which the r-process material is ejected into the interstellar medium, but strongly sensitive to the environment in which the NSM event occurs. In one halo, the NSM event takes place at the centre of the stellar distribution, leading to high levels of r-process enrichment such as seen in a local UFD, Reticulum II (Ret II). In a second halo, the NSM event takes place outside of the densest part of the galaxy, leading to a more extended r-process distribution. The subsequent star formation occurs in an interstellar medium with shallow levels of r-process enrichment that results in stars with low levels of [Eu/H] compared to Ret II stars even when the maximum possible r-process mass is assumed to be ejected. This suggests that the natal kicks of neutron stars may also play an important role in determining the r-process abundances in UFD galaxies, a topic that warrants further theoretical investigation.

Modeling Neutron stars as r-process sources in Ultra Faint Dwarf galaxies

NASA Astrophysics Data System (ADS)

Safarzadeh, Mohammadtaher; Scannapieco, Evan

2018-06-01

To explain the high observed abundances of r-process elements in local ultrafaint dwarf (UFD) galaxies, we perform cosmological zoom simulations that include r-process production from neutron star mergers (NSMs). We model star formation stochastically and simulate two different haloes with total masses ≈108 M⊙ at z = 6. We find that the final distribution of [Eu/H] versus [Fe/H] is relatively insensitive to the energy by which the r-process material is ejected into the interstellar medium, but strongly sensitive to the environment in which the NSM event occurs. In one halo, the NSM event takes place at the centre of the stellar distribution, leading to high levels of r-process enrichment such as seen in a local UFD, Reticulum II (Ret II). In a second halo, the NSM event takes place outside of the densest part of the galaxy, leading to a more extended r-process distribution. The subsequent star formation occurs in an interstellar medium with shallow levels of r-process enrichment that results in stars with low levels of [Eu/H] compared to Ret II stars even when the maximum possible r-process mass is assumed to be ejected. This suggests that the natal kicks of neutron stars may also play an important role in determining the r-process abundances in UFD galaxies, a topic that warrants further theoretical investigation.

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 27 2011-07-01 2011-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 27 2014-07-01 2014-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 28 2012-07-01 2012-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 28 2013-07-01 2013-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

An Analysis of Full Scale Measurements on M/V Stewart J. Cort during the 1979 and 1980 Trial Programs. Parts I and II.

DTIC Science & Technology

1982-02-01

IKCuNITY CLASSIFICATION OF Tm4iS IMAGE (Vrhn Dot& Entered) .,.-’- . . . . . ... .. ... " . . ...... ....... .. . . . . . . . . TABLE OF CONTENTS...11-19 APPENDIX D: BASIC PROCESSING ............................... 11-21 APPENDIX E: SIMULATION OF DATA...equipment previously developed, and an on-board data processing system. These full scale ship trials were the first in history with the objective of directly

A Goal Congruity Model of Role Entry, Engagement, and Exit: Understanding Communal Goal Processes in STEM Gender Gaps.

PubMed

Diekman, Amanda B; Steinberg, Mia; Brown, Elizabeth R; Belanger, Aimee L; Clark, Emily K

2017-05-01

The goal congruity perspective provides a theoretical framework to understand how motivational processes influence and are influenced by social roles. In particular, we invoke this framework to understand communal goal processes as proximal motivators of decisions to engage in science, technology, engineering, and mathematics (STEM). STEM fields are not perceived as affording communal opportunities to work with or help others, and understanding these perceived goal affordances can inform knowledge about differences between (a) STEM and other career pathways and (b) women's and men's choices. We review the patterning of gender disparities in STEM that leads to a focus on communal goal congruity (Part I), provide evidence for the foundational logic of the perspective (Part II), and explore the implications for research and policy (Part III). Understanding and transmitting the opportunities for communal goal pursuit within STEM can reap widespread benefits for broadening and deepening participation.

Functional Integration

NASA Astrophysics Data System (ADS)

Cartier, Pierre; DeWitt-Morette, Cecile

2006-11-01

Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

Functional Integration

NASA Astrophysics Data System (ADS)

Cartier, Pierre; DeWitt-Morette, Cecile

2010-06-01

Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

Sensors, Volume 3, Part II, Chemical and Biochemical Sensors Part II

NASA Astrophysics Data System (ADS)

Göpel, Wolfgang; Jones, T. A.; Kleitz, Michel; Lundström, Ingemar; Seiyama, Tetsuro

1997-06-01

'Sensors' is the first self-contained series to deal with the whole area of sensors. It describes general aspects, technical and physical fundamentals, construction, function, applications and developments of the various types of sensors. This is the second of two volumes focusing on chemical and biochemical sensors. It includes a detailed description of biosensors which often make use of transducer properties of the basic sensors and usually have additional biological components. This volume provides a unique overview of the applications, the possibilities and limitations of sensors in comparison with conventional instrumentation in analytical chemistry. Specific facettes of applications are presented by specialists from different fields including environmental, biotechnological, medical, or chemical process control. This book is an indispensable reference work for both specialits and newcomers, researchers and developers.

Management strategies to effect change in intensive care units: lessons from the world of business. Part II. Quality-improvement strategies.

PubMed

Gershengorn, Hayley B; Kocher, Robert; Factor, Phillip

2014-03-01

The success of quality-improvement projects relies heavily on both project design and the metrics chosen to assess change. In Part II of this three-part American Thoracic Society Seminars series, we begin by describing methods for determining which data to collect, tools for data presentation, and strategies for data dissemination. As Avedis Donabedian detailed a half century ago, defining metrics in healthcare can be challenging; algorithmic determination of the best type of metric (outcome, process, or structure) can help intensive care unit (ICU) managers begin this process. Choosing appropriate graphical data displays (e.g., run charts) can prompt discussions about and promote quality improvement. Similarly, dashboards/scorecards are useful in presenting performance improvement data either publicly or privately in a visually appealing manner. To have compelling data to show, ICU managers must plan quality-improvement projects well. The second portion of this review details four quality-improvement tools-checklists, Six Sigma methodology, lean thinking, and Kaizen. Checklists have become commonplace in many ICUs to improve care quality; thinking about how to maximize their effectiveness is now of prime importance. Six Sigma methodology, lean thinking, and Kaizen are techniques that use multidisciplinary teams to organize thinking about process improvement, formalize change strategies, actualize initiatives, and measure progress. None originated within healthcare, but each has been used in the hospital environment with success. To conclude this part of the series, we demonstrate how to use these tools through an example of improving the timely administration of antibiotics to patients with sepsis.

Alternative Schools. An Analysis of Their Impact on Administrators: Part II

ERIC Educational Resources Information Center

Sachs, David; Codding, Judy

1976-01-01

Extensive interviews with school personnel of alternative programs reveal that it is in the process of defining their essence with regard to decision-making, admissions, policies, responsibility, freedom, calendars, and programs vs. school identity that planning problems arise. (A related document is EA 507 273.) (Author/MLF)

Athletic Training Student Socialization Part II: Socializing the Professional Master's Athletic Training Student

ERIC Educational Resources Information Center

Mazerolle, Stephanie M.; Bowman, Thomas G.; Dodge, Thomas M.

2014-01-01

Context: Professional socialization is a key process in the professional development of athletic training students. Literature has focused on many perspectives regarding socialization and has primarily focused on the undergraduate level. Objective: Gain insights from the program director at professional master's (PM) athletic training programs on…

PLASMA POLYMER FILMS AS ADHESION PROMOTING PRIMERS FOR ALUMINUM. PART II: STRENGTH AND DURABILITY OF LAP JOINTS

EPA Science Inventory

Plasma polymerized hexamethyldisiloxane (HMDSO) films (~800 A in thickness) were deposited onto 6111-T4 aluminum substrates in radio frequency and microwave powered reactors and used as primers for structural adhesive bonding. Processing variables such as substrate pre-treatment,...

42 CFR 423.32 - Enrollment process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... individual successfully enrolls in another PDP or MA-PD plan; (ii) The individual voluntarily disenrolls from... under this part as of December 31, 2005, remain enrolled in that plan as of January 1, 2006, and receive... a plan poses potential harm to plan members, CMS may implement passive enrollment procedures. (1...

42 CFR 423.32 - Enrollment process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... individual successfully enrolls in another PDP or MA-PD plan; (ii) The individual voluntarily disenrolls from... under this part as of December 31, 2005, remain enrolled in that plan as of January 1, 2006, and receive... a plan poses potential harm to plan members, CMS may implement passive enrollment procedures. (1...

Rural Virginia Development Foundation: The Making of an Institution. Publication 302-002.

ERIC Educational Resources Information Center

Deaton, Brady J.; And Others

The publication describes the process which created the Rural Virginia Development Foundation and the potential contribution it holds for the agricultural sector of Virginia's economy and for the state's rural communities. Following an introduction, Part II provides background, operating assumptions, and principal justification for the Foundation;…

40 CFR 725.205 - Persons who may report under this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... viable improvement of a product already on the market; or (ii) The researcher has sought or is seeking... microorganism, including as part of a mixture, is processed, distributed in commerce, or used, for any commercial purpose other than research and development. (e) Quantities of the inactivated microorganism, or...

Woody biomass supply from thinnings to reduce fire hazard in the U.S. West and its potential impact on regional wood markets

Treesearch

Kenneth E. Skog; Peter J. Ince; Henry Spelter; Andi Kramp; R. James Barbour

2008-01-01

Part I of this paper identifies timberland areas in 12 western states where thinning treatments are judged to be needed to reduce fire hazard and may ?pay for themselves?? at a scale to make investment in forest product processing a realistic option. We also estimate amounts of biomass removed and costs of removal. Part II of this paper estimates the market impact if...

Hazardous Waste Minimization Initiation Decision Report. Volume 1

DTIC Science & Technology

1988-06-01

different treatment and disposal practices for spent caustic materials. In some cases, the material is placed in drums and sent to DRMO for disposal or to a...often available. As at some Navy facilities, waste caustic may be neutralized with spent acid at the process line with the effluent sent to the IWTP...3-111 PART II - Spent Battery Electrolyte .... 3-112 PART III- Battery Acid Sludges ........ 3-113 3.13.3 Disposal of Wastes from Battery Repair and

Child impulsiveness-inattention, early peer experiences, and the development of early onset conduct problems.

PubMed

Snyder, James; Prichard, Joy; Schrepferman, Lynn; Patrick, M Renee; Stoolmiller, Mike

2004-12-01

The conjoint influence of child impulsiveness-inattention (I/I) and peer relationships on growth trajectories of conduct problems was assessed in a community sample of 267 boys and girls. I/I reliably predicted teacher- and parent-reported conduct problems at kindergarten entry and growth in those problems over the next 2 years for boys and girls. The relation of boys' I/I to conduct problems was mediated, in part, by peer rejection and involvement in coercive exchanges with peers. The relation of girls' I/I to conduct problems was less clearly mediated by peer processes, but peer difficulties had additive effects. The impact of peer relationships on trajectories of conduct problems was apparent to parents as well as to teachers. Although I/I increments risk for early and persisting conduct problems in concert with poor peer relationships, it does so in complex and gender-specific ways.

Paraho environmental data. Part I. Process characterization. Par II. Air quality. Part III. Water quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heistand, R.N.; Atwood, R.A.; Richardson, K.L.

1980-06-01

From 1973 to 1978, Development Engineering, Inc. (DEI), a subsidiary of Paraho Development Corporation, demostrated the Paraho technology for surface oil shale retorting at Anvil Points, Colorado. A considerable amount of environmentally-related research was also conducted. This body of data represents the most comprehensive environmental data base relating to surface retorting that is currently available. In order to make this information available, the DOE Office of Environment has undertaken to compile, assemble, and publish this environmental data. The compilation has been prepared by DEI. This report includes the process characterization, air quality, and water quality categories.

An Analysis of a Finite Element Method for Convection-Diffusion Problems. Part II. A Posteriori Error Estimates and Adaptivity.

DTIC Science & Technology

1983-03-01

AN ANALYSIS OF A FINITE ELEMENT METHOD FOR CONVECTION- DIFFUSION PROBLEMS PART II: A POSTERIORI ERROR ESTIMATES AND ADAPTIVITY by W. G. Szymczak Y 6a...PERIOD COVERED AN ANALYSIS OF A FINITE ELEMENT METHOD FOR final life of the contract CONVECTION- DIFFUSION PROBLEM S. Part II: A POSTERIORI ERROR ...Element Method for Convection- Diffusion Problems. Part II: A Posteriori Error Estimates and Adaptivity W. G. Szvmczak and I. Babu~ka# Laboratory for

Design and Analysis of A Multi-Backend Database System for Performance Improvement, Functionality Expansion and Capacity Growth. Part II.

DTIC Science & Technology

1981-08-01

of Transactions ..... . 29 5.5.2 Attached Execution of Transactions ........ ... 29 5.5.3 The Choice of Transaction Execution for Access Control...basic access control mech- anism for statistical security and value-dependent security. In Section 5.5, * we describe the process of execution of ...the process of request execution with access control for in- sert and non-insert requests in MDBS. We recall again (see Chapter 4) that the process

Processing of copper converter slag for metals reclamation: Part II: mineralogical study.

PubMed

Deng, Tong; Ling, Yunhan

2004-10-01

Chemical and mineralogical characterizations of a copper converter slag, and its products obtained by curing with strong sulphuric acid and leaching with hot water, were carried out using ore microscopy, scanning electronic microscopy with energy dispersive spectrometry, wave-length dispersive X-ray fluorescence spectrometry, X-ray diffractometry and chemical phase analysis, which provided necessary information to develop a new process for treating such slag and further understanding of the chemical and mineralogical changes in the process.

Molecular mechanisms and signaling pathways of angiotensin II-induced muscle wasting: potential therapeutic targets for cardiac cachexia.

PubMed

Yoshida, Tadashi; Tabony, A Michael; Galvez, Sarah; Mitch, William E; Higashi, Yusuke; Sukhanov, Sergiy; Delafontaine, Patrice

2013-10-01

Cachexia is a serious complication of many chronic diseases, such as congestive heart failure (CHF) and chronic kidney disease (CKD). Many factors are involved in the development of cachexia, and there is increasing evidence that angiotensin II (Ang II), the main effector molecule of the renin-angiotensin system (RAS), plays an important role in this process. Patients with advanced CHF or CKD often have increased Ang II levels and cachexia, and angiotensin-converting enzyme (ACE) inhibitor treatment improves weight loss. In rodent models, an increase in systemic Ang II leads to weight loss through increased protein breakdown, reduced protein synthesis in skeletal muscle and decreased appetite. Ang II activates the ubiquitin-proteasome system via generation of reactive oxygen species and via inhibition of the insulin-like growth factor-1 signaling pathway. Furthermore, Ang II inhibits 5' AMP-activated protein kinase (AMPK) activity and disrupts normal energy balance. Ang II also increases cytokines and circulating hormones such as tumor necrosis factor-α, interleukin-6, serum amyloid-A, glucocorticoids and myostatin, which regulate muscle protein synthesis and degradation. Ang II acts on hypothalamic neurons to regulate orexigenic/anorexigenic neuropeptides, such as neuropeptide-Y, orexin and corticotropin-releasing hormone, leading to reduced appetite. Also, Ang II may regulate skeletal muscle regenerative processes. Several clinical studies have indicated that blockade of Ang II signaling via ACE inhibitors or Ang II type 1 receptor blockers prevents weight loss and improves muscle strength. Thus the RAS is a promising target for the treatment of muscle atrophy in patients with CHF and CKD. This article is part of a Directed Issue entitled: Molecular basis of muscle wasting. Copyright © 2013 Elsevier Ltd. All rights reserved.

Walla Walla District History. Part 3. 1975-80

DTIC Science & Technology

1980-01-01

1 to acceptance of the project by fishery agencies, the local people, and the State of , I daho . II By 1980 i nsta 11 ati on of all three new units...the I daho water plan II that the future growth and quality of life in Idaho depends, in large measure, upon the acceptance and adoption of a...funds was deferred. 32 Nonetheless, the states of Washington and I daho began the comp 1 i cated process of se 1 ect i ng a site acceptable to both

Refining of Military Jet Fuels from Shale Oil. Part II. Volume II. (In Situ Shale Oil Process Data).

DTIC Science & Technology

1982-03-01

SPEC Meeting Specifications OXY Test Series on In Situ Shale Oil z P Pressure (P + N) Paraffins and Naphthenes PRO Test Series on Above Ground Shale Oil...LV 6/ 12.0 Naphthenes , LV% (Aromatics, LV %/ 11.8 Gross Heating Value, Btu/lb 19,720 19,068 -73- TABLE 111-29. CRUDE SHALE: OIL HYDROTREATING SERIES M...Wt % - Ramabottomn Carbon -1.34 IParaffins (P-IN), LV % (71.1) -IOlef ins, LV % 9.4 i ~ Naphthenes , LV% - Aromatics, LV % 19.5 - Gross Heating Value

Origin of the F685 and F695 fluorescence in photosystem II.

PubMed

Andrizhiyevskaya, Elena G; Chojnicka, Agnieszka; Bautista, James A; Diner, Bruce A; van Grondelle, Rienk; Dekker, Jan P

2005-06-01

The emission spectra of CP47-RC and core complexes of Photosystem II (PS II) were measured at different temperatures and excitation wavelengths in order to establish the origin of the emission and the role of the core antenna in the energy transfer and charge separation processes in PS II. Both types of particles reveal strong dependences of spectral shape and yield on temperature. The results indicate that the well-known F-695 emission at 77 K arises from excitations that are trapped on a red-absorbing CP47 chlorophyll, whereas the F-685 nm emission at 77 K arises from excitations that are transferred slowly from 683 nm states in CP47 and CP43 to the RC, where they are trapped by charge separation. We conclude that F-695 at 77 K originates from the low-energy part of the inhomogeneous distribution of the 690 nm absorbing chlorophyll of CP47, while at 4 K the fluorescence originates from the complete distribution of the 690 nm chlorophyll of CP47 and from the low-energy part of the inhomogeneous distribution of one or more CP43 chlorophylls.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device).

PubMed

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-02-16

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements.

Local spectrum analysis of field propagation in an anisotropic medium. Part II. Time-dependent fields.

PubMed

Tinkelman, Igor; Melamed, Timor

2005-06-01

In Part I of this two-part investigation [J. Opt. Soc. Am. A 22, 1200 (2005)], we presented a theory for phase-space propagation of time-harmonic electromagnetic fields in an anisotropic medium characterized by a generic wave-number profile. In this Part II, these investigations are extended to transient fields, setting a general analytical framework for local analysis and modeling of radiation from time-dependent extended-source distributions. In this formulation the field is expressed as a superposition of pulsed-beam propagators that emanate from all space-time points in the source domain and in all directions. Using time-dependent quadratic-Lorentzian windows, we represent the field by a phase-space spectral distribution in which the propagating elements are pulsed beams, which are formulated by a transient plane-wave spectrum over the extended-source plane. By applying saddle-point asymptotics, we extract the beam phenomenology in the anisotropic environment resulting from short-pulsed processing. Finally, the general results are applied to the special case of uniaxial crystal and compared with a reference solution.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device)

PubMed Central

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-01-01

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements. PMID:28212348

Production of Copper-Plated Beamline Bellows and Spools for LCLS-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Katherine M.; Carpenter, Brian C.; Daly, Ed

The SLAC National Accelerator Laboratory is currently constructing a major upgrade to its accelerator, the Linac Coherent Light Source II (LCLS-II). Several Department of Energy national laboratories, including the Thomas Jefferson National Accelerator Facility (JLab) and Fermi National Accelerator Laboratory (FNAL), are participating in this project. The 1.3-GHz cryomodules for this project consist of eight cavities separated by bellows (expansion joints) and spools (tube sections), which are copper plated for RF conduction. JLab is responsible for procurement of these bellows and spools, which are delivered to JLab and FNAL for assembly into cryomodules. Achieving accelerator-grade copper plating is always amore » challenge and requires careful specification of requirements and application of quality control processes. Due to the demanding technical requirements of this part, JLab implemented procurement strategies to make the process more efficient as well as provide process redundancy. This paper discusses the manufacturing challenges that were encountered and resolved, as well as the strategies that were employed to minimize the impact of any technical issues.« less

Copper and the oxidation of hemoglobin: a comparison of horse and human hemoglobins.

PubMed

Rifkind, J M; Lauer, L D; Chiang, S C; Li, N C

1976-11-30

Oxidation studies of hemoglobin by Cu(II) indicate that for horse hemoglobin, up to a Cu(II)/heme molar ratio of 0.5, all of the Cu(II) added is used to rapidly oxidize the heme. On the other hand, most of the Cu(II) added to human hemoglobin at low Cu(II)/heme molar ratios is unable to oxidize the heme. Only at Cu(II)/heme molar ratios greater than 0.5 does the amount of oxidation per added Cu(II) approach that of horse hemoglobin. At the same time, binding studies indicate that human hemoglobin has an additional binding site involving one copper for every two hemes, which has a higher copper affinity than the single horse hemoglobin binding site. The Cu(II) oxidation of human hemoglobin is explained utilizing this additional binding site by a mechanism where a transfer of electrons cannot occur between the heme and the Cu(II) bound to the high affinity human binding site. The electron transfer must involve the Cu(II) bound to the lower affinity human hemoglobin binding site, which is similar to the only horse hemoglobin site. The involvement of beta-2 histidine in the binding of this additional copper is indicated by a comparison of the amino acid sequences of various hemoglobins which possess the additional site, with the amino acid sequences of hemoglobins which do not possess the additional site. Zn(II), Hg(II), and N-ethylmaleimide (NEM) are found to decrease the Cu(II) oxidation of hemoglobin. The sulfhydryl reagents, Hg(II) and NEM, produce a very dramatic decrease in the rate of oxidation, which can only be explained by an effect on the rate for the actual transfer of electrons between the Cu(II) and the Fe(II). The effect of Zn(II) is much smaller and can, for the most part, be explained by the increased oxygen affinity, which affects the ligand dissociation process that must precede the electron transfer process.

A Survey of Optometry Graduates to Determine Practice Patterns: Part II: Licensure and Practice Establishment Experiences.

ERIC Educational Resources Information Center

Bleimann, Robert L.; Smith, Lee W.

1985-01-01

A summary of Part II of a two-volume study of optometry graduates conducted by the Association of Schools and Colleges of Optometry is presented. Part II includes the analysis of the graduates' licensure and practice establishment experiences. (MLW)

Development of self-healing polymers via amine-epoxy chemistry: II. Systematic evaluation of self-healing performance

NASA Astrophysics Data System (ADS)

Zhang, He; Yang, Jinglei

2014-06-01

Part I of this study (H Zhang and J Yang 2014 Smart Mater. Struct. 23 065003) reported the preparation and characterization of epoxy microcapsules (EP-capsules) and amine loaded hollow glass bubbles (AM-HGBs), and the modeling of a two-part self-healing system. In part II, the self-healing performance of this material system is systematically investigated. Various factors including the ratio, the total concentration and the size of the two carriers are studied as well as the healing temperature and the post heat treatment process. The best healing performance is obtained at a ratio of 1:3 of EP-capsules to AM-HGBs. It is observed that a higher concentration of larger carriers, together with a higher healing temperature, enables better healing behavior. Healing efficiency of up to 93% is obtained in these systems. In addition, post heat treatment decreases the healing efficiency due to stoichiometric mismatch of healing agents caused by leakage of amine in the HGBs at elevated temperature.

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries

PubMed Central

Yewdell, Jonathan W.

2009-01-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process. PMID:18401347

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries.

PubMed

Yewdell, Jonathan W

2008-06-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process.

42 CFR 423.128 - Dissemination of Part D plan information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... plan sponsor's toll free customer service line or by accessing the plan sponsor's internet Web site. (8... redetermination processes via an Internet Web site; and (iii) A system that transmits codes to network pharmacies...— (1) A toll-free customer call center that— (i) Is open during usual business hours. (ii) Provides...

Evaluation of the Texas Technology Immersion Pilot: First-Year Results

ERIC Educational Resources Information Center

Shapley, Kelly; Sheehan, Daniel; Sturges, Keith; Caranikas-Walker, Fanny; Huntsberger, Briana; Maloney, Catherine

2006-01-01

The Technology Immersion Pilot (TIP) sets forth a vision for technology immersion in Texas public schools. The Texas Education Agency (TEA) directed nearly $14 million in federal Title II, Part D monies toward funding a wireless learning environment for high-need middle schools through a competitive grant process. A concurrent research project…

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2014 CFR

2014-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2012 CFR

2012-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2013 CFR

2013-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2011 CFR

2011-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

EVOLUTION OF PARTICLE NUMBER DISTRIBUTION NEAR ROADWAYS. PART II: THE ROAD-TO-AMBIENT PROCESS (R827352C011)

EPA Science Inventory

The 'road-to-ambient' evolution of particle number distributions near the 405 and 710 freeways in Los Angeles, California, in both summer and winter, were analyzed and then simulated by a multi-component sectional aerosol dynamic model. Condensation/evaporation and dilution we...

75 FR 6422 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-09

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving Proposed Rule Change... Incorporated NYSE Rule 411(a)(ii)(5) as Part of the Process of Developing the Consolidated FINRA Rulebook February 2, 2010. On December 4, 2009, the Financial Industry Regulatory Authority, Inc. (``FINRA'') (f/k/a...

Technology Insertion-Engineering Services Process Characterization Task Order No. 1 (Block II). Database Documentation Book for OC-ALC MABPAB

DTIC Science & Technology

1989-09-11

1 -33 , 057T6-028 . SPACER. . . ............. ......... .. .. 2 -34 1= 063 . BEARING, Needle (60380) (BAC- BIOB -317) ... ..... . . 1 -35 60... BIOB -317).......... -35 69-10330-6 . STOP (Optional 69-10330-4).... ............ • • • (ATTACHING PARTS) -36 NAS679A3W . NUT

Teacher Effectiveness Research. Part II: Special Topics. Bibliographies in Education No. 78.

ERIC Educational Resources Information Center

Gilliss, Geraldine; Moll, Marita

This 723-item bibliography lists materials on teacher effectiveness research published from 1978 to early 1984. Reference to some earlier works of significance is also included. Teacher effectiveness research is here defined to include principally studies conducted in the presage-context-process-product tradition in an attempt to determine…

Intelligent Information Retrieval: Diagnosing Information Need. Part II. Uncertainty Expansion in a Prototype of a Diagnostic IR Tool.

ERIC Educational Resources Information Center

Cole, Charles; Cantero, Pablo; Sauve, Diane

1998-01-01

Outlines a prototype of an intelligent information-retrieval tool to facilitate information access for an undergraduate seeking information for a term paper. Topics include diagnosing the information need, Kuhlthau's information-search-process model, Shannon's mathematical theory of communication, and principles of uncertainty expansion and…

Mathematics in Marine Botany: Examples of the Modelling Process. Part II: Continuous Models.

ERIC Educational Resources Information Center

Nyman, Melvin A.; Brown, Murray T.

1996-01-01

Describes some continuous models for growth of the seaweed Macrocystis pyrifera. Uses observed growth rates over several months to derive first-order differential equations as models for growth rates of individual fronds. The nature of the solutions is analyzed and comparison between these theoretical results and documented characteristics of…

40 CFR 725.975 - EPA approval of alternative control measures.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional... equivalency to EPA under this part must submit the request to EPA (via CDX) using e-PMN software. See 40 CFR 720.40(a)(2)(ii) for information on how to obtain e-PMN software. Support documents related to these...

Family Finance Education; An Interdisciplinary Approach. Volume II.

ERIC Educational Resources Information Center

Gibbs, Mary S., Ed.; And Others, Eds.

Volume II of a two-part series related to family finance education provides materials for study and discussion in the 1968 workshop. In Part I, members of the advisory council present their viewpoints concerning an interdisciplinary approach to education in family finance. Part II presents basic and current information related to principal areas…

Development of Simultaneous Corrosion Barrier and Optimized Microstructure in FeCrAl Heat-Resistant Alloy for Energy Applications. Part II: The Optimized Creep-Resistant Microstructure

NASA Astrophysics Data System (ADS)

Pimentel, G.; Aranda, M. M.; Chao, J.; González-Carrasco, J. L.; Capdevila, C.

2015-09-01

The first part of this two-part study reported the possibility of simultaneously generating a dense, self-healing α-alumina layer by thermal oxidation and a coarse-grained microstructure with a potential goodness for high-temperature creep resistance in a FeCrAl oxide dispersion-strengthened ferritic alloy that was cold deformed after hot rolling and extrusion. In this second part, the factors affecting the formation of the coarse-grained microstructure such as strain gradients induced during the rolling process are analyzed. It is concluded that larger strain gradients lead to more refined and more isotropic grain structures.

On the Processing of Spalling Experiments. Part II: Identification of Concrete Fracture Energy in Dynamic Tension

NASA Astrophysics Data System (ADS)

Lukić, Bratislav B.; Saletti, Dominique; Forquin, Pascal

2017-12-01

This paper presents a second part of the study aimed at investigating the fracture behavior of concrete under high strain rate tensile loading. The experimental method together with the identified stress-strain response of three tests conducted on ordinary concrete have been presented in the paper entitled Part I (Forquin and Lukić in Journal of Dynamic Behavior of Materials, 2017. https://doi.org/10.1007/s40870-017-0135-1). In the present paper, Part II, the investigation is extended towards directly determining the specific fracture energy of each observed fracture zone by visualizing the dynamic cracking process with a temporal resolution of 1 µs. Having access to temporal displacement fields of the sample surface, it is possible to identify the fracture opening displacement (FOD) and the fracture opening velocity of any principle (open) and secondary (closed) fracture at each measurement instance, that may or may not lead to complete physical failure of the sample. Finally, the local Stress-FOD curves were obtained for each observed fracture zone, opposed to previous works where indirect measurements were used. The obtained results indicated a much lower specific fracture energy compared to the results often found in the literature. Furthermore, numerical simulations were performed with a damage law to evaluate the validity of the proposed experimental data processing and compare it to the most often used one in the previous works. The results showed that the present method can reliably predict the specific fracture energy needed to open one macro-fracture and suggested that indirect measurement techniques can lead to an overestimate of specific fracture energy due to the stringent assumption of linear elasticity up-to the peak and the inability of having access to the real post-peak change of axial stress.

Reaction Mechanisms of Metals with Hydrogen Sulfide and Thiols in Model Wine. Part 1: Copper-Catalyzed Oxidation.

PubMed

Kreitman, Gal Y; Danilewicz, John C; Jeffery, David W; Elias, Ryan J

2016-05-25

Sulfidic off-odors as a result of hydrogen sulfide (H2S) and low-molecular-weight thiols are commonly encountered in wine production. These odors are usually removed by the process of Cu(II) fining, a process that remains poorly understood. The present study aims to elucidate the underlying mechanisms by which Cu(II) interacts with H2S and thiol compounds (RSH) under wine-like conditions. Copper complex formation was monitored along with H2S, thiol, oxygen, and acetaldehyde concentrations after the addition of Cu(II) (50 or 100 μM) to air-saturated model wine solutions containing H2S, cysteine, 6-sulfanylhexan-1-ol, or 3-sulfanylhexan-1-ol (300 μM each). The presence of H2S and thiols in excess to Cu(II) led to the rapid formation of ∼1.4:1 H2S/Cu and ∼2:1 thiol/Cu complexes, resulting in the oxidation of H2S and thiols and reduction of Cu(II) to Cu(I), which reacted with oxygen. H2S was observed to initially oxidize rather than form insoluble copper sulfide. The proposed reaction mechanisms provide insight into the extent to which H2S can be selectively removed in the presence of thiols in wine.

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false NRC and EPA Requirements for Preclosure Repository... SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and EPA Requirements for Preclosure Repository Performance Under proposed 40 CFR part 191, subpart A...

46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

Code of Federal Regulations, 2013 CFR

2013-10-01

.../cm2. ......do kPa 1×10 3 N/m 2. Temperature Degree Celsius °C 5/9 (°F-32). Viscosity milli-Pascal... 46 Shipping 5 2013-10-01 2013-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153... common metric Force Newton N 0.225 lbs. Length Meter m 39.37 in. Centimeter cm .3937 in. Pressure Pascal...

46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

Code of Federal Regulations, 2012 CFR

2012-10-01

.../cm2. ......do kPa 1×10 3 N/m 2. Temperature Degree Celsius °C 5/9 (°F-32). Viscosity milli-Pascal... 46 Shipping 5 2012-10-01 2012-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153... common metric Force Newton N 0.225 lbs. Length Meter m 39.37 in. Centimeter cm .3937 in. Pressure Pascal...

46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

Code of Federal Regulations, 2014 CFR

2014-10-01

.../cm2. ......do kPa 1×10 3 N/m 2. Temperature Degree Celsius °C 5/9 (°F-32). Viscosity milli-Pascal... 46 Shipping 5 2014-10-01 2014-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153... common metric Force Newton N 0.225 lbs. Length Meter m 39.37 in. Centimeter cm .3937 in. Pressure Pascal...

78 FR 9057 - Medicare Program; Request for Information on the Use of Clinical Quality Measures (CQMs) Reported...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

... Part II: Lifelong Learning and Self-Assessment Part III: Cognitive Expertise Part IV: Practice...: Licensure and Professional Standing Part II: Lifelong Learning and Self-Assessment Part III: Cognitive...\\ The MOC assesses physicians' commitment to lifelong learning according to the following six core...

Fate of nuclear material during subsequent steps of the kinetin-induced PCD in apical parts of Vicia faba ssp. minor seedling roots.

PubMed

Kaźmierczak, Andrzej; Soboska, Kamila

2018-07-01

In animals during apoptosis, the best examined type of programmed cell death (PCD), three main phases are distinguished: (i) specification (signaling), (ii) killing and (iii) execution one. It has bean postulated that plant PCD also involves three subsequent phases: (i) transmission of death signals to cells (signaling), (ii) initiation of killing processes and (iii) destruction of cells. One of the most important hallmarks of animal and plant PCD are those regarding nucleus, not thoroughly studied in plants so far. To study kinetin-induced PCD (Kin-PCD) in the context of nuclear material faith, 2-cm apical parts of Vicia faba ssp. minor seedling roots were used. Applied assays involving spectrophotometry, transmission electron microscopy, fluorescence and white light microscopy allowed to examine metabolic and cytomorphologic hallmarks such as changes in DNA content, ssDNA formation and activity of acidic and basic nucleases (DNases and RNases) as well as malformations and fragmentation of nucleoli and nuclei. The obtained results concerning the PCD hallmarks and influence of ZnSO 4 on Kin-PCD allowed us to confirmed presence of specification/signaling, killing and execution/degradation phases of the process and broaden the knowledge about processes affecting nuclei during PCD. Copyright © 2018 Elsevier Ltd. All rights reserved.

3-D Reconstruction of Macular Type II Cell Innervation Patterns in Space-Flight and Control Rats

NASA Technical Reports Server (NTRS)

Ross, Muriel Dorothy; Montgomery, K.; Linton, S.; Cheng, R.; Tomko, David L. (Technical Monitor)

1995-01-01

A semiautomated method for reconstructing objects from serial thin sections has been developed in the Biocomputation Center. The method is being used to completely, for the first time, type II hair cells and their innervations. The purposes are to learn more about the fundamental circuitry of the macula on Earth and to determine whether changes in connectivities occur under space flight conditions. Data captured directly from a transmission electron microscope via a video camera are sent to a graphics workstation. There, the digitized micrographs are mosaicked into sections and contours are traced, registered and displayed by semiautomated methods. Current reconstructions are of type II cells from the medial part of rat maculas collected in-flight on the Space Life Sciences-2 mission, 4.5 hrs post-flight, and from a ground control. Results show that typical type II cells receive processes from tip to six nearby calyces or afferents. Nearly all processes are elongated and have bouton-like enlargements; some have numerous vesicles. Multiple (2 to 4) processes from a single calyx to a type II cell are common, and approximately 1/3 of the processes innervale 2 or 3 type II cells or a neighboring cluster. From 2% to 6% of the cells resemble type I cells morphologically but have demi-calyces. Thus far, increments in synaptic number in type II cells of flight rats are prominent along processes that supply two hair cells. It is clear that reconstruction methods provide insights into details of macular circuitry not obtainable by other techniques. The results demonstrate a morphological basis for interactions between adjacent receptive fields through feed back-feed forward connections, and for dynamic alterations in receptive field range and activity during preprocessing of linear acceleratory information by the maculas. The reconstruction method we have developed will find further applications in the study of the details of neuronal architecture of more complex systems, to seek out shared organizational properties or neuronal networks and to understand better localization of synaptic changes in altered environments.

40 CFR Appendix II to Part 86 - Temperature Schedules

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

40 CFR Appendix II to Part 86 - Temperature Schedules

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

40 CFR Appendix II to Part 86 - Temperature Schedules

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

40 CFR Appendix II to Part 86 - Temperature Schedules

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

Improvements in Cz silicon PV module manufacturing

NASA Astrophysics Data System (ADS)

King, Richard R.; Mitchell, Kim W.; Jester, Theresa L.

1997-02-01

Work focused on reducing the cost per watt of Cz Si photovoltaic modules under Phase I of Siemens Solar Industries' DOE/NREL PVMaT 4A subcontract is described. Module cost components are analyzed and solutions to high-cost items are discussed in terms of specific module designs. The approaches of using larger cells and modules to reduce per-part processing cost, and of minimizing yield loss are particularly leveraging. Yield components for various parts of the fabrication process and various types of defects are shown, and measurements of the force required to break wafers throughout the cell fabrication sequence are given. The most significant type of yield loss is mechanical breakage. The implementation of statistical process control on key manufacturing processes at Siemens Solar Industries is described. Module configurations prototyped during Phase I of this project and scheduled to begin production in Phase II have a projected cost per watt reduction of 19%.

Modifying the electronic and optical properties of carbon nanotubes

NASA Astrophysics Data System (ADS)

Kinder, Jesse M.

The intrinsic electronic and optical properties of carbon nanotubes make them promising candidates for circuit elements and LEDs in nanoscale devices. However, applied fields and interactions with the environment can modify these intrinsic properties. This dissertation is a theoretical study of perturbations to an ideal carbon nanotube. It illustrates how transport and optical properties of carbon nanotubes can be adversely affected or intentionally modified by the local environment. The dissertation is divided into three parts. Part I analyzes the effect of a transverse electric field on the single-electron energy spectrum of semiconducting carbon nanotubes. Part II analyzes the effect of the local environment on selection rules and decay pathways relevant to dark excitons. Part III is a series of 26 appendices. Two different models for a transverse electric field are introduced in Part I. The first is a uniform field perpendicular to the nanotube axis. This model suggests the field has little effect on the band gap until it exceeds a critical value that can be tuned with strain or a magnetic field. The second model is a transverse field localized to a small region along the nanotube axis. The field creates a pair of exponentially localized bound states but has no effect on the band gap for particle transport. Part II explores the physics of dark excitons in carbon nanotubes. Two model calculations illustrate the effect of the local environment on allowed optical transitions and nonradiative recombination pathways. The first model illustrates the role of inversion symmetry in the optical spectrum. Broken inversion symmetry may explain low-lying peaks in the exciton spectrum of boron nitride nanotubes and localized photoemission around impurities and interfaces in carbon nanotubes. The second model in Part II suggests that free charge carriers can mediate an efficient nonradiative decay process for dark excitons in carbon nanotubes. The appendices in Part III provide background material and details of calculations relevant to the main text. These appendices may be useful to researchers new to the study of carbon nanotubes.

46 CFR 160.132-13 - Approval inspections and tests for prototype davits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... reviewed under § 160.132-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.132-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

46 CFR 160.115-13 - Approval inspections and tests for prototype winches.

Code of Federal Regulations, 2012 CFR

2012-10-01

... reviewed under § 160.115-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.115-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

46 CFR 160.115-13 - Approval inspections and tests for prototype winches.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reviewed under § 160.115-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.115-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

46 CFR 160.115-13 - Approval inspections and tests for prototype winches.

Code of Federal Regulations, 2013 CFR

2013-10-01

... reviewed under § 160.115-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.115-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

46 CFR 160.132-13 - Approval inspections and tests for prototype davits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... reviewed under § 160.132-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.132-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

46 CFR 160.132-13 - Approval inspections and tests for prototype davits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reviewed under § 160.132-9 of this subpart; and (C) When welding is part of the construction process, is constructed by the welding procedure and materials as per the plans reviewed under § 160.132-9 of this subpart and the welders are appropriately qualified; (ii) Assuring that the quality-assurance program of the...

Mineral scale management. Part II, Fundamental chemistry

Treesearch

Alan W. Rudie; Peter W. Hart

2006-01-01

The mineral scale that deposits in digesters and bleach plants is formed by a chemical precipitation process.As such, it is accurately modeled using the solubility product equilibrium constant. Although solubility product identifies the primary conditions that must be met for a scale problem to exist, the acid-base equilibria of the scaling anions often control where...

Evaluation of the Texas Technology Immersion Pilot: Findings from the Second Year

ERIC Educational Resources Information Center

Shapley, Kelly; Sheehan, Daniel; Maloney, Catherine; Caranikas-Walker, Fanny; Huntsberger, Briana; Sturges, Keith

2007-01-01

The Technology Immersion Pilot (TIP) sets forth a vision for technology immersion in Texas public schools. The Texas Education Agency (TEA) originally directed more than $14.5 million in federal Title II, Part D monies toward funding a wireless learning environment for high-need middle schools through a competitive grant process. A concurrent…

Institutional Approaches to Innovation and Change (II): The Configurational Perspective on Institution Building.

ERIC Educational Resources Information Center

Bhola, H. S.

Institution building is considered as a process amenable to both explanation and design if a generic "grammar of artifactual action" is used. The Configurational Theory of Innovation Diffusion model (CLER) is introduced and used to demonstrate how the world of the institution builder could be ordered as part of such grammar for designing…

75 FR 47269 - Pilot Program for Waiver of Patent Owner's Statement in Ex Parte Reexamination Proceedings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... expected to form a portion of the data used in the decision making processes in phases II and III. Dated... likely to improve efficiency. Such changes may include internal procedural changes, rule making that... notice will take effect on August 5, 2010. FOR FURTHER INFORMATION CONTACT: Robert A. Clarke, Kenneth M...

25 CFR 224.55 - Is information a tribe submits throughout the TERA process under this part subject to disclosure...

Code of Federal Regulations, 2013 CFR

2013-04-01

... THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Procedures for Obtaining Tribal Energy... required the information to be submitted, and, if so, how substantial competitive harm or other business harm would likely result from release of the information; or (ii) Whether the tribe provided the...

25 CFR 224.55 - Is information a tribe submits throughout the TERA process under this part subject to disclosure...

Code of Federal Regulations, 2010 CFR

2010-04-01

... THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Procedures for Obtaining Tribal Energy... required the information to be submitted, and, if so, how substantial competitive harm or other business harm would likely result from release of the information; or (ii) Whether the tribe provided the...

25 CFR 224.55 - Is information a tribe submits throughout the TERA process under this part subject to disclosure...

Code of Federal Regulations, 2011 CFR

2011-04-01

... THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Procedures for Obtaining Tribal Energy... required the information to be submitted, and, if so, how substantial competitive harm or other business harm would likely result from release of the information; or (ii) Whether the tribe provided the...

25 CFR 224.55 - Is information a tribe submits throughout the TERA process under this part subject to disclosure...

Code of Federal Regulations, 2014 CFR

2014-04-01

... THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Procedures for Obtaining Tribal Energy... required the information to be submitted, and, if so, how substantial competitive harm or other business harm would likely result from release of the information; or (ii) Whether the tribe provided the...

Community Health Education in Developing Countries. Appropriate Technologies for Development. Manual M-8.

ERIC Educational Resources Information Center

American Public Health Association, Washington, DC.

This manual was developed for those interested in promoting change to improve health conditions of their communities. Parts I and II focus on fundamental health education processes and discuss techniques and approaches for working with community members to plan and develop programs that are responsive to the community's expressed needs and goals.…

NASA EEE Parts and Advanced Interconnect Program (AIP)

NASA Technical Reports Server (NTRS)

Gindorf, T.; Garrison, A.

1996-01-01

none given From Program Objectives: I. Accelerate the readiness of new technologies through development of validation, assessment and test method/tools II. Provide NASA Projects infusion paths for emerging technologies III. Provide NASA Projects technology selection, application and validation guidelines for harware and processes IV. Disseminate quality assurance, reliability, validation, tools and availability information to the NASA community.

17 CFR 405.2 - Reports to be made by registered government securities brokers and dealers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... government securities broker or dealer shall file Part I of Form BD-Y2K (§ 249.618 of this title) prepared as..., shall file Part II of Form BD-Y2K (§ 249.618 of this title). Part II of Form BD-Y2K shall address each... registered government securities broker or dealer that was not required to file Part II of Form BD-Y2K under...

Basic Services for Children: A Continuing Search for Learning Priorities. A Dossier for Initiating a Dialogue--Part II, 1978. Experiments and Innovations in Education No. 37.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

Both parts I and II of the dossier are collections of selected activities directed toward the deprived young in a developing world. This book, part II, departs from its predecessor in that it takes a more global view of education services to both children and adults in developing countries. Part A discusses the philosophy and scope of the dossier.…

Energy information data base: report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-09-01

Each report processed by the US DOE Technical Information Center is identified by a unique report number consisting of a code plus a sequential number. In most cases, the code identifies the originating installation. In some cases, it identifies a specific program or a type of publication. Listed in this publication are all codes that have been used by DOE in cataloging reports. This compilation consists of two parts. Part I is an alphabetical listing of report codes identified with the issuing installations that have used the codes. Part II is an alphabetical listing of installations identified with codes eachmore » has used. (RWR)« less

Transient state kinetic investigation of ferritin iron release

NASA Astrophysics Data System (ADS)

Ciasca, G.; Papi, M.; Chiarpotto, M.; Rodio, M.; Campi, G.; Rossi, C.; De Sole, P.; Bianconi, A.

2012-02-01

Increased iron concentration in tissues appears to be a factor in the genesis and development of inflammatory and degenerative diseases. By means of real-time small angle x-ray scattering measurements, we studied the kinetics of iron release from the ferritin inorganic core as a function of time and distance from the iron core centre. Accordingly, the iron release process follows a three step model: (i) a defect nucleation in the outer part of the mineral core, (ii) the diffusion of the reducing agent towards the inner part of the core, and (iii) the erosion of the core from the inner to the outer part.

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

[The influence of C-taurine antioxidant complex on biochemical blood parameters in the process of treatment of patients with diabetes mellitus of type II with nonproliferative diabetic retinopathy].

PubMed

Lekishvili, S E

2014-02-01

The purpose of this investigation is to study the effect of C- taurine complex of antioxidants on blood biochemical parameters in the process of treatment of patients with diabetes mellitus of type II with NPDR. 68 patients (136 eyes) were enrolled in the study. The monitoring of the patient lasted for 3 months. The character of changes of the basic visual functions has been examined. The patients were divided into 2 groups (main and control). Treatment of patients with main group conducted antioxidant complex Taurine + Vitamin C for 42 days. namely. Thus, we have revealed antioxidant activity of the combination of taurine and vitamin C with positive effect on the indexes of carbohydrate, lipid metabolism and hepatoprotective characteristics in patients with diabetes mellitus type II with NPDR. Taking into consideration the peculiarities of correlation relationships between functional, clinical and biochemical parameters and the results of experimental studies on animal it is acceptable to use Taurine complex + Vitamin C as part of conservative treatment of patients with diabetes mellitus type II with NPDR.

Processing of two latent membrane protein 1 MHC class I epitopes requires tripeptidyl peptidase II involvement.

PubMed

Diekmann, Jan; Adamopoulou, Eleni; Beck, Olaf; Rauser, Georg; Lurati, Sarah; Tenzer, Stefan; Einsele, Hermann; Rammensee, Hans-Georg; Schild, Hansjörg; Topp, Max S

2009-08-01

The EBV Ag latent membrane protein 1 (LMP1) has been described as a potential target for T cell immunotherapy in EBV-related malignancies. However, only a few CD8(+) T cell epitopes are known, and the benefit of LMP1-specific T cell immunotherapy has not yet been proven. In this work, we studied the processing of the two LMP1 HLA-A02-restricted epitopes, YLLEMLRWL and YLQQNWWTL. We found that target cells endogenously expressing the native LMP1 are not recognized by CTLs specific for these epitopes because the N-terminal part of LMP1 limits the efficiency of epitope generation. We further observed that the proteasome is not required for the generation of both epitopes and that the YLLEMLRWL epitope seems to be destroyed by the proteasome, because blocking of proteasomal activities enhanced specific CTL activation. Activation of LMP1-specific CTLs could be significantly reduced after inhibition of the tripeptidyl peptidase II, suggesting a role for this peptidase in the processing of both epitopes. Taken together, our results demonstrate that the MHC class I-restricted LMP1 epitopes studied in this work are two of very few epitopes known to date to be processed proteasome independently by tripeptidyl peptidase II.

40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Laboratory Testing II.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld engines with the following steady-state duty cycle: G3 mode No. Engine speed a Torque(percent) b Weighting...

AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

ScienceCinema

None

2017-12-09

Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

Anaerobic microbial redox processes in a landfill leachate contaminated aquifer (Grindsted, Denmark)

NASA Astrophysics Data System (ADS)

Ludvigsen, L.; Albrechtsen, H.-J.; Heron, G.; Bjerg, P. L.; Christensen, T. H.

1998-10-01

The distribution of anaerobic microbial redox processes was investigated along a 305 m long transect of a shallow landfill-leachate polluted aquifer. By unamended bioassays containing sediment and groundwater, 37 samples were investigated with respect to methane production, sulfate, iron, and manganese reduction, and denitrification. Methane production was restricted to the most reduced part of the plume with rates of 0.003-0.055 nmol CH 4/g dry weight/day. Sulfate reduction was observed at rates of maximum 1.8 nmol SO 42-/g dry weight/day along with methane production in the plume, but sulfate reduction was also observed further downgradient of the landfill. Iron reduction at rates of 5-19 nmol Fe(II)/g dry weight/day was observed in only a few samples, but this may be related to a high detection limit for the iron reducing bioassay. Manganese reduction at rates of maximum 2.4 nmol Mn(II)/g dry weight/day and denitrification at rates of 0.2-37 nmol N 2O-N/g dry weight/day were observed in the less reduced part of the plume. All the redox processes were microbial processes. In many cases, several redox processes took place simultaneously, but in all samples one process dominated accounting for more than 70% of the equivalent carbon conversion. The bioassays showed that the redox zones in the plume identified from the groundwater composition (e.g. as methanogenic and sulfate reducing) locally hosted also other redox processes (e.g. iron reduction). This may have implications for the potential of the redox zone to degrade trace amounts of organic chemicals and suggests that unamended bioassays may be an important supplement to other approaches in characterizing the redox processes in an anaerobic plume.

Bonding thermoplastic polymers

DOEpatents

Wallow, Thomas I [Fremont, CA; Hunter, Marion C [Livermore, CA; Krafcik, Karen Lee [Livermore, CA; Morales, Alfredo M [Livermore, CA; Simmons, Blake A [San Francisco, CA; Domeier, Linda A [Danville, CA

2008-06-24

We demonstrate a new method for joining patterned thermoplastic parts into layered structures. The method takes advantage of case-II permeant diffusion to generate dimensionally controlled, activated bonding layers at the surfaces being joined. It is capable of producing bonds characterized by cohesive failure while preserving the fidelity of patterned features in the bonding surfaces. This approach is uniquely suited to production of microfluidic multilayer structures, as it allows the bond-forming interface between plastic parts to be precisely manipulated at micrometer length scales. The bond enhancing procedure is easily integrated in standard process flows and requires no specialized equipment.

Subseabed disposal program annual report, January-December 1980. Volume II. Appendices (principal investigator progress reports). Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinga, K.R.

Volume II of the sixth annual report describing the progress and evaluating the status of the Subseabed Disposal Program contains the appendices referred to in Volume I, Summary and Status. Because of the length of Volume II, it has been split into two parts for publication purposes. Part 1 contains Appendices A-Q; Part 2 contains Appendices R-MM. Separate abstracts have been prepared for each appendix for inclusion in the Energy Data Base.

Using 3D range cameras for crime scene documentation and legal medicine

NASA Astrophysics Data System (ADS)

Cavagnini, Gianluca; Sansoni, Giovanna; Trebeschi, Marco

2009-01-01

Crime scene documentation and legal medicine analysis are part of a very complex process which is aimed at identifying the offender starting from the collection of the evidences on the scene. This part of the investigation is very critical, since the crime scene is extremely volatile, and once it is removed, it can not be precisely created again. For this reason, the documentation process should be as complete as possible, with minimum invasiveness. The use of optical 3D imaging sensors has been considered as a possible aid to perform the documentation step, since (i) the measurement is contactless and (ii) the process required to editing and modeling the 3D data is quite similar to the reverse engineering procedures originally developed for the manufacturing field. In this paper we show the most important results obtained in the experimentation.

Bayesian Probability Theory

NASA Astrophysics Data System (ADS)

von der Linden, Wolfgang; Dose, Volker; von Toussaint, Udo

2014-06-01

Preface; Part I. Introduction: 1. The meaning of probability; 2. Basic definitions; 3. Bayesian inference; 4. Combinatrics; 5. Random walks; 6. Limit theorems; 7. Continuous distributions; 8. The central limit theorem; 9. Poisson processes and waiting times; Part II. Assigning Probabilities: 10. Transformation invariance; 11. Maximum entropy; 12. Qualified maximum entropy; 13. Global smoothness; Part III. Parameter Estimation: 14. Bayesian parameter estimation; 15. Frequentist parameter estimation; 16. The Cramer-Rao inequality; Part IV. Testing Hypotheses: 17. The Bayesian way; 18. The frequentist way; 19. Sampling distributions; 20. Bayesian vs frequentist hypothesis tests; Part V. Real World Applications: 21. Regression; 22. Inconsistent data; 23. Unrecognized signal contributions; 24. Change point problems; 25. Function estimation; 26. Integral equations; 27. Model selection; 28. Bayesian experimental design; Part VI. Probabilistic Numerical Techniques: 29. Numerical integration; 30. Monte Carlo methods; 31. Nested sampling; Appendixes; References; Index.

Report submitted to the trail smelter arbitral tribunal. Part I. Operational features of trail smelter. Part II. Meteorological investigations in Columbia River Valley near trail, by E. Wendell Hewson, Consulting Meteorologist to trail smelter, and Gerald C. Gill, Meteorological Service of Canada. Part III. Provisional regulations adopted during trail period and their effectiveness. Appendix. Final regime prescribed by tribunal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dean, R.S.; Swain, R.E.

1944-01-01

The toxic effects of SO/sub 2/ emitted by a metals smelter at Trail, British Columbia, on vegetation in parts of Washington State during 1900 to 1938, compensation paid, the effectiveness of remedial measures, and studies on the influence of meteorological conditions on atmospheric diffusion processes in the region are reviewed. The findings of an Arbitral Tribunal set up by the USA and Canadian governments in 1935 are reported. (CH)

Fourth - generation languages. Volume 2. Representative 4GLs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, J.

1986-01-01

The chapters in Part II each describe one representative product marketed by a vendor other than IBM. (Volume III of this work covers IBM languages.) The chapters in Part II cover the following 4GLs: ADS/ONLINE, APPLICATION FACTORY, DATATRIEVE, FOCUS, IDEAL, INTELLECT, MANTIS, MIMER, NATURAL, NOMAD2, RAMIS II, SYSTEM W, and USE-IT. The Perspective section of Part II presents a general overview of the product and describes its role in the marketplace. The Tutorial section describes how a user employs the language in application development.

40 CFR Appendix II to Part 1042 - Steady-State Duty Cycles

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Steady-State Duty Cycles II Appendix..., App. II Appendix II to Part 1042—Steady-State Duty Cycles (a) The following duty cycles apply as specified in § 1042.505(b)(1): (1) The following duty cycle applies for discrete-mode testing: E3 mode No...

40 CFR Table 2 to Subpart II of... - Volatile Organic HAP (VOHAP) Limits for Marine Coatings

Code of Federal Regulations, 2013 CFR

2013-07-01

... for Marine Coatings 2 Table 2 to Subpart II of Part 63 Protection of Environment ENVIRONMENTAL... (Surface Coating) Pt. 63, Subpt. II, Table 2 Table 2 to Subpart II of Part 63—Volatile Organic HAP (VOHAP) Limits for Marine Coatings Coating category VOHAP limits a,b,c Grams/liter coating (minus water and...

40 CFR Table 2 to Subpart II of... - Volatile Organic HAP (VOHAP) Limits for Marine Coatings

Code of Federal Regulations, 2012 CFR

2012-07-01

... for Marine Coatings 2 Table 2 to Subpart II of Part 63 Protection of Environment ENVIRONMENTAL... (Surface Coating) Pt. 63, Subpt. II, Table 2 Table 2 to Subpart II of Part 63—Volatile Organic HAP (VOHAP) Limits for Marine Coatings Coating category VOHAP limits a,b,c Grams/liter coating (minus water and...

40 CFR Table 2 to Subpart II of... - Volatile Organic HAP (VOHAP) Limits for Marine Coatings

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Marine Coatings 2 Table 2 to Subpart II of Part 63 Protection of Environment ENVIRONMENTAL... (Surface Coating) Pt. 63, Subpt. II, Table 2 Table 2 to Subpart II of Part 63—Volatile Organic HAP (VOHAP) Limits for Marine Coatings Coating category VOHAP limits a b c Grams/liter coating (minus water and...

40 CFR Table 2 to Subpart II of... - Volatile Organic HAP (VOHAP) Limits for Marine Coatings

Code of Federal Regulations, 2010 CFR

2010-07-01

... for Marine Coatings 2 Table 2 to Subpart II of Part 63 Protection of Environment ENVIRONMENTAL... (Surface Coating) Pt. 63, Subpt. II, Table 2 Table 2 to Subpart II of Part 63—Volatile Organic HAP (VOHAP) Limits for Marine Coatings Coating category VOHAP limits a,b,c Grams/liter coating (minus water and...

40 CFR Table 2 to Subpart II of... - Volatile Organic HAP (VOHAP) Limits for Marine Coatings

Code of Federal Regulations, 2011 CFR

2011-07-01

... for Marine Coatings 2 Table 2 to Subpart II of Part 63 Protection of Environment ENVIRONMENTAL... (Surface Coating) Pt. 63, Subpt. II, Table 2 Table 2 to Subpart II of Part 63—Volatile Organic HAP (VOHAP) Limits for Marine Coatings Coating category VOHAP limits a,b,c Grams/liter coating (minus water and...

31 CFR Appendix II to Part 13 - Form of Bill for Reimbursement

Code of Federal Regulations, 2010 CFR

2010-07-01

... title) of ______ (Country) to participate in the work of ______ (International Organization) or occurring at the _______ (Permanent or observer mission) to ______ (International organization) during the.... II Appendix II to Part 13—Form of Bill for Reimbursement I hereby request that ______ (Governmental...

Interactions of the "piano-stool" [ruthenium(II)(η(6) -arene)(quinolone)Cl](+) complexes with water; DFT computational study.

PubMed

Zábojníková, Tereza; Cajzl, Radim; Kljun, Jakob; Chval, Zdeněk; Turel, Iztok; Burda, Jaroslav V

2016-07-15

Full optimizations of stationary points along the reaction coordinate for the hydration of several quinolone Ru(II) half-sandwich complexes were performed in water environment using the B3PW91/6-31+G(d)/PCM/UAKS method. The role of diffuse functions (especially on oxygen) was found crucial for correct geometries along the reaction coordinate. Single-point (SP) calculations were performed at the B3LYP/6-311++G(2df,2pd)/DPCM/saled-UAKS level. In the first part, two possible reaction mechanisms-associative and dissociative were compared. It was found that the dissociative mechanism of the hydration process is kinetically slightly preferred. Another important conclusion concerns the reaction channels. It was found that substitution of chloride ligand (abbreviated in the text as dechlorination reaction) represents energetically and kinetically the most feasible pathway. In the second part the same hydration reaction was explored for reactivity comparison of the Ru(II)-complexes with several derivatives of nalidixic acid: cinoxacin, ofloxacin, and (thio)nalidixic acid. The hydration process is about four orders of magnitude faster in a basic solution compared to neutral/acidic environment with cinoxacin and nalidixic acid as the most reactive complexes in the former and latter environments, respectively. The explored hydration reaction is in all cases endergonic; nevertheless the endergonicity is substantially lower (by ∼6 kcal/mol) in basic environment. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2012 CFR

2012-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

20 CFR 408.1045 - What procedures apply if you request an ALJ hearing?

Code of Federal Regulations, 2013 CFR

2013-04-01

... CERTAIN WORLD WAR II VETERANS Determinations and the Administrative Review Process Administrative Law... section. (b) Exceptions. (1) In § 416.1446(b)(1), the last sentence does not apply under this part. (2) In § 416.1452(a)(1)(i), the words “supplemental security income” are deemed to read “SVB.” (3) In § 416...

20 CFR 408.1045 - What procedures apply if you request an ALJ hearing?

Code of Federal Regulations, 2010 CFR

2010-04-01

... CERTAIN WORLD WAR II VETERANS Determinations and the Administrative Review Process Administrative Law... section. (b) Exceptions. (1) In § 416.1446(b)(1), the last sentence does not apply under this part. (2) In § 416.1452(a)(1)(i), the words “supplemental security income” are deemed to read “SVB.” (3) In § 416...

20 CFR 408.1045 - What procedures apply if you request an ALJ hearing?

Code of Federal Regulations, 2011 CFR

2011-04-01

... CERTAIN WORLD WAR II VETERANS Determinations and the Administrative Review Process Administrative Law... section. (b) Exceptions. (1) In § 416.1446(b)(1), the last sentence does not apply under this part. (2) In § 416.1452(a)(1)(i), the words “supplemental security income” are deemed to read “SVB.” (3) In § 416...

20 CFR 408.1045 - What procedures apply if you request an ALJ hearing?

Code of Federal Regulations, 2012 CFR

2012-04-01

... CERTAIN WORLD WAR II VETERANS Determinations and the Administrative Review Process Administrative Law... section. (b) Exceptions. (1) In § 416.1446(b)(1), the last sentence does not apply under this part. (2) In § 416.1452(a)(1)(i), the words “supplemental security income” are deemed to read “SVB.” (3) In § 416...

20 CFR 408.1045 - What procedures apply if you request an ALJ hearing?

Code of Federal Regulations, 2014 CFR

2014-04-01

... CERTAIN WORLD WAR II VETERANS Determinations and the Administrative Review Process Administrative Law... section. (b) Exceptions. (1) In § 416.1446(b)(1), the last sentence does not apply under this part. (2) In § 416.1452(a)(1)(i), the words “supplemental security income” are deemed to read “SVB.” (3) In § 416...

Electronic health records in an occupational health setting-Part II. Global deployment.

PubMed

Bey, Jean M; de Magalhães, Josiane S; Bojórquez, Lorena; Lin, Karen

2013-03-01

Electronic medical record systems are being used by more multi-national corporations. This article describes one corporation's considerations and process in successfully deploying a global electronic medical record system to international facilities in Brazil, Mexico, Singapore, and Taiwan. This article summarizes feedback from the experiences of occupational health nurse superusers in these countries. Copyright 2013, SLACK Incorporated.

A Bookless Library, Part II: Managing Access Services with No In-House Collections

ERIC Educational Resources Information Center

Sewell, Bethany B.

2013-01-01

In the spring of 2011, the Penrose Library at the University of Denver began the process of storing all materials, services, and staff to temporary locations in preparation for a building renovation project. The library was faced with the challenge of delivering all materials from an off-site storage facility within two hours of request. A new…

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2011 CFR

2011-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2013 CFR

2013-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2014 CFR

2014-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

Association Between National Board Dental Examination Part II Scores and Comprehensive Examinations at Harvard School of Dental Medicine.

PubMed

Lee, Min Kyeong; Allareddy, Veerasathpurush; Howell, T Howard; Karimbux, Nadeem Y

2011-01-01

Harvard School of Dental Medicine (HSDM) uses a hybrid problem-based approach to teaching in the predoctoral program. The objective structured clinical examination (OSCE) is a formative examination designed to assess the performance of students in the problem-based learning (PBL) curriculum. At HSDM three comprehensive examinations with OSCE components are administered during the third and fourth years of clinical training. The National Board Dental Examination (NBDE) Part II is taken in the final year of the predoctoral program. This study examines the association between the NBDE Part II and the comprehensive exams held at HSDM. Predoctoral students from the HSDM classes of 2005 and 2006 were included in this study. The outcome variable of interest was the scores obtained by students in the NBDE Part II, and the main independent variable of interest was the performance of students in the comprehensive exams (honors, pass, make-up exam to pass). The Mann-Whitney U-test was used to examine the association between the grades obtained in the each of the three comprehensive exams and the NBDE Part II scores. Multivariable linear regression analysis was also used to examine the association between the NBDE Part II scores and the comprehensive exam grades. The effect of potential confounding factors including age, sex, and race/ethnicity was adjusted. The results suggest that students who performed well in the comprehensive exams performed better on the NBDE Part II, even after adjusting for confounding factors. Future studies will examine the long-term impact of PBL on postdoctoral plans and career choices.

Ada Integrated Environment II Computer Program Development Specification. Part 1.

DTIC Science & Technology

1981-12-01

34Programmable" access 3.2.5.5 controls ; provision for privileged 3.2.5.6 user. 3.3.1 3.3.3 4.1.2.11 3.7.1.2 KDBS - 3.2.5.7 Capability to archive data base...CM -1 1 PHASE I SOW REQUIREMENTS A - SPEC B5 -SPEC 4.111. 3.7.2 1Compiler -331 aMAPSE shall include a mechanism for 1 Linker -3.2.5 aautomatic stub...19 3.2.5.5 Process Administrator The Process Administrator controls the executions of logically concurrent MAPSE processes. The KFW Interface Package

A Study of Mandarin Loanwords: Lexical Stratification, Adaptation and Factors

ERIC Educational Resources Information Center

Kim, Tae Eun

2012-01-01

This dissertation is about Chinese loanwords. It is mainly divided into two parts. Part I is a general discussion about loanwords in Chinese; Chapter I and II belong to the first part. Part II is a discussion about the analyses of Mandarin loanwords originating from English. Chapter III, IV, and V are all related to the second part. Chapter VI is…

Network Centric Operations (NCO) Case Study. The British Approach to Low-Intensity Operations: Part 2

DTIC Science & Technology

2007-02-12

Imperial War Museum Sound Archive, Accession No. 16397 (6 January 1996 ) 46 Jackson, p .45 47 Nagl, p .66-7 48 Stubbs, p .71 49 Nagl, p .93 Part II 16...Coogan, The Troubles, (London: Arrow, 1996 ), p .145 Part II 61 of 246 but there really appeared to be nothing in between to provide workable...Psychological Ops Capability Since 1945’, British Army Review, December 1996 , p .5 Part II 62 of 246 weakness caused by the lack of both numbers and

Chemicals and Structural Foams to Neutralize or Defeat Anti-Personnel Mines

DTIC Science & Technology

1990-10-01

first-level goals in LD. This shows the basic approach used for this analysis. I OVERALL GOALi Select Best Foam System II Best Foam Product Best Delivery...pouring back and forth three times would have three steps for that part of the process, plus any other motions, such as pulling off the lid, and...i B-II I I I I I I :’½ j> I I I I 3 Typical Tilt-Rod AP Mine I I I I I I Typical Pull Firing Pin Device H I I I I I I I iPrsu -SniiePatcCsdMn I i

Cattaraugus Creek Harbor, New York General Design Memorandum. Phase II. (Detailed Design). Volume II. Appendix E. Littoral Processes and Sedimentation in the Cattaraugus Embayment, New York. Appendix F. Sediment Transport in Cattaraugus Creek.

DTIC Science & Technology

1976-03-01

beaches than any other part of the southeastern shoreline of Lake Erie . It is the only major sand accumulation zone with the exception of Presque Isle , in...52 20. Photographs of zonal site #10. 54 21. Photograph and map of zonal site #11, Presque Isle , Pa. 57 F22. Photographs and beach profiles at zonal...site #11. 59 23. Photograph of zonal site #12, the recurved spit area on Presque Isle , Pa. 62 24. Block diagram of recurved spit area of Presque Isle

20 CFR 408.101 - What is this part about?

Code of Federal Regulations, 2011 CFR

2011-04-01

....101 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II... (Special Benefits for Certain World War II Veterans) established a program for the payment of benefits to certain World War II veterans. The regulations in this part are divided into the following subparts...

20 CFR 408.101 - What is this part about?

Code of Federal Regulations, 2014 CFR

2014-04-01

....101 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II... (Special Benefits for Certain World War II Veterans) established a program for the payment of benefits to certain World War II veterans. The regulations in this part are divided into the following subparts...

20 CFR 408.101 - What is this part about?

Code of Federal Regulations, 2013 CFR

2013-04-01

....101 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II... (Special Benefits for Certain World War II Veterans) established a program for the payment of benefits to certain World War II veterans. The regulations in this part are divided into the following subparts...

20 CFR 408.101 - What is this part about?

Code of Federal Regulations, 2012 CFR

2012-04-01

....101 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II... (Special Benefits for Certain World War II Veterans) established a program for the payment of benefits to certain World War II veterans. The regulations in this part are divided into the following subparts...

Impact of a commercial glyphosate formulation on adsorption of Cd(II) and Pb(II) ions on paddy soil.

PubMed

Divisekara, T; Navaratne, A N; Abeysekara, A S K

2018-05-01

Use of glyphosate as a weedicide on rice cultivation has been a controversial issue in Sri Lanka, due to the hypothesis that the metal complexes of commercial glyphosate is one of the causative factors of Chronic Kidney Disease of unknown aetiology (CKDu) prevalent in some parts of Sri Lanka. The effect of commercial glyphosate on the adsorption and desorption of Cd(II) and Pb(II) ions on selective paddy soil studied using batch experiments, over a wide concentration range, indicates that the Langmuir adsorption isotherm model is obeyed at low initial metal ion concentrations while the Freundlich adsorption isotherm model obeys at high metal ion concentrations in the presence and absence of glyphosate. For all cases, adsorption of both Cd(II) and Pb(II) ions obeys pseudo second order kinetics, suggesting that initial adsorption is a chemisorption process. In the presence of glyphosate formulation, the extent of adsorption of Cd(II) and Pb(II) ions on soil is decreased, while their desorption is increased at high concentrations of glyphosate. Low concentrations of glyphosate formulation do not significantly affect the desorption of metal ions from soil. Reduction of adsorption leads to enhance the concentration of Cd(II) and Pb(II) ions in the aqueous phase when in contact with soil. Copyright © 2018 Elsevier Ltd. All rights reserved.

Rotational and translational diffusions of fluorescent probes during gelation process

NASA Astrophysics Data System (ADS)

Hattori, Yusuke; Panizza, Pascal; Letamendia, Louis; Ushiki, Hideharu

2006-04-01

Gelation process has been investigated by using light scattering techniques in recent years. We measured both of rotational and translational motions of fluorescent probes during gelation process. The measurements were performed after the temperature quenched at 30 °C. As the results, rotational diffusion coefficient of fluorescein was decreased after 6.0 × 10 4 s and energy transfer rate was reduced after 2.0 × 10 4 s. We sorted the gelation process into the following three parts, (I) pre-gelation, (II) reduction of translational diffusion (aging), and (III) reduction of rotational diffusion with saturating translational diffusion (post-gelation). The time scale of the process was completely different from the results of other methods.

12 CFR Appendix II to Part 27 - Information for Government Monitoring Purposes

Code of Federal Regulations, 2010 CFR

2010-01-01

... II Appendix II to Part 27 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY... Monitoring Purposes The following language is approved by the Comptroller of the Currency and will satisfy... used separately. This information may also be provided orally by the applicant. The following...

40 CFR Appendix II to Part 86 - Temperature Schedules

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Temperature Schedules II Appendix II... to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

25 CFR 547.1 - What is the purpose of this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.1 What is the purpose of this part... other technologic aids in connection with the play of Class II games. This part establishes the minimum...

25 CFR 547.1 - What is the purpose of this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.1 What is the purpose of this part... other technologic aids in connection with the play of Class II games. This part establishes the minimum...

25 CFR 547.1 - What is the purpose of this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.1 What is the purpose of this part... other technologic aids in connection with the play of Class II games. This part establishes the minimum...

Restricted dog leucocyte antigen (DLA) class II haplotypes and genotypes in Beagles.

PubMed

Soutter, Francesca; Kennedy, Lorna J; Ollier, William E R; Solano-Gallego, Laia; Catchpole, Brian

2015-03-01

Beagles are commonly used in vaccine trials as part of the regulatory approval process. Genetic restriction within this breed and the impact this might have on vaccine responses are rarely considered. This study was designed to characterise diversity of dog leucocyte antigen (DLA) class II genes in a breeding colony of laboratory Beagles, whose offspring are used in vaccine studies. DLA haplotypes were determined by PCR and sequence-based typing from genomic DNA extracted from blood. Breeding colony Beagles had significantly different DLA haplotype frequencies in comparison with pet Beagles and both groups showed limited DLA diversity. Restricted DLA class II genetic variability within Beagles might result in selective antigen presentation and vaccine responses that are not necessarily representative of those seen in other dog breeds. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Some biodiversity points and suggestions for the Myanmar Protected Area System

Treesearch

Daniel H. Henning

2007-01-01

This paper is divided into a brief background section followed by Part I: Biodiversity Points, and Part II: Suggestions that are needed for the ecological integrity of actual and potential protected areas in Myanmar. Part I consists of general and Myanmar Biodiversity Considerations, and Part II consists of the following suggestions: (l) international financial and...

Understanding Medicines: Conceptual Analysis of Nurses' Needs for Knowledge and Understanding of Pharmacology (Part I). Understanding Medicines: Extending Pharmacology Education for Dependent and Independent Prescribing (Part II).

ERIC Educational Resources Information Center

Leathard, Helen L.

2001-01-01

Part I reviews what nurses need to know about the administration and prescription of medicines. Part II addresses drug classifications, actions and effects, and interactions. Also discussed are the challenges pharmacological issues pose for nursing education. (SK)

Estimating Welfare Effects Consistent with Forward-Looking Behavior. Part I: Lessons from a Simulation Exercise. Part II: Empirical Results.

ERIC Educational Resources Information Center

Keane, Michael P.; Wolpin, Kenneth I.

2002-01-01

Part I uses simulations of a model of welfare participation and women's fertility decisions, showing that increases in per-child payments have substantial impact on fertility. Part II uses estimations of decision rules of forward-looking women regarding welfare participation, fertility, marriage, work, and schooling. (SK)

40 CFR 63.117 - Process vent provisions-reporting and recordkeeping requirements for group and TRE determinations...

Code of Federal Regulations, 2010 CFR

2010-07-01

... period of the performance testing. (ii) For an incinerator, the percent reduction of organic HAP or TOC... organic HAP or TOC (parts per million by volume, by compound) determined as specified in § 63.116(c) of... fuel and is not mixed with the primary fuel, the percent reduction of organic HAP or TOC, or the...

Career Ladders and Teacher Incentives: The Utah Experiment. Part II: Case Studies. Final Report: Secretary's Discretionary Program Implementation Grant to Develop Teacher Incentive Structures.

ERIC Educational Resources Information Center

Peterson, Ken; Kauchak, Don

This volume, the second of two reports on development of teacher incentive structures, presents case studies of a career ladder design and teacher evaluation experiment in four Utah school districts. Case studies examined relationships among career ladder features, process variables, and career ladder effectiveness, which is defined in terms of…

MANUFACTURING PROCESS FUNCTIONS--I. AN ALTERNATIVE MODEL AND ITS COMPARISON WITH EXISTING FUNCTIONS (AND)II. SELECTION OF TRAINEES AND CONTROL OF THEIR PROGRESS.

ERIC Educational Resources Information Center

GLOVER, J.H.

THE CHIEF OBJECTIVE OF THIS STUDY OF SPEED-SKILL ACQUISITION WAS TO FIND A MATHEMATICAL MODEL CAPABLE OF SIMPLE GRAPHIC INTERPRETATION FOR INDUSTRIAL TRAINING AND PRODUCTION SCHEDULING AT THE SHOP FLOOR LEVEL. STUDIES OF MIDDLE SKILL DEVELOPMENT IN MACHINE AND VEHICLE ASSEMBLY, AIRCRAFT PRODUCTION, SPOOLMAKING AND THE MACHINING OF PARTS CONFIRMED…

40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a) The...

40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a) The...

40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a) The...

40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a) The...

Improved Tubulars for Better Economics in Deep Gas Well Drilling Using Microwave Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinesh Agrawal

2006-09-30

The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joiningmore » (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.« less

Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinesh Agrawal; Paul Gigl; Mark Hunt

2007-07-31

The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joiningmore » (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.« less

An integrated toolbox for processing and analysis of remote sensing data of inland and coastal waters - atmospheric correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haan, J.F. de; Kokke, J.M.M.; Hoogenboom, H.J.

1997-06-01

Deriving thematic maps of water quality parameters from a remote sensing image requires a number of processing steps, such as calibration, atmospheric correction, air-water interface correction, and application of water quality algorithms. A prototype version of an integrated software environment has recently been developed that enables the user to perform and control these processing steps. Major parts of this environment are: (i) access to the MODTRAN 3 radiative transfer code, (ii) a database of water quality algorithms, and (iii) a spectral library of Dutch coastal and inland waters, containing subsurface irradiance reflectance spectra and associated water quality parameters. The atmosphericmore » correction part of this environment is discussed here. It is shown that this part can be used to accurately retrieve spectral signatures of inland water for wavelengths between 450 and 750 nm, provided in situ measurements are used to determine atmospheric model parameters. Assessment of the usefulness of the completely integrated software system in an operational environment requires a revised version that is presently being developed.« less

Stochastic theory of nonequilibrium steady states and its applications. Part I

NASA Astrophysics Data System (ADS)

Zhang, Xue-Juan; Qian, Hong; Qian, Min

2012-01-01

The concepts of equilibrium and nonequilibrium steady states are introduced in the present review as mathematical concepts associated with stationary Markov processes. For both discrete stochastic systems with master equations and continuous diffusion processes with Fokker-Planck equations, the nonequilibrium steady state (NESS) is characterized in terms of several key notions which are originated from nonequilibrium physics: time irreversibility, breakdown of detailed balance, free energy dissipation, and positive entropy production rate. After presenting this NESS theory in pedagogically accessible mathematical terms that require only a minimal amount of prerequisites in nonlinear differential equations and the theory of probability, it is applied, in Part I, to two widely studied problems: the stochastic resonance (also known as coherent resonance) and molecular motors (also known as Brownian ratchet). Although both areas have advanced rapidly on their own with a vast amount of literature, the theory of NESS provides them with a unifying mathematical foundation. Part II of this review contains applications of the NESS theory to processes from cellular biochemistry, ranging from enzyme catalyzed reactions, kinetic proofreading, to zeroth-order ultrasensitivity.

Curriculum Redesign in Veterinary Medicine: Part II.

PubMed

Macik, Maria L; Chaney, Kristin P; Turner, Jacqueline S; Rogers, Kenita S; Scallan, Elizabeth M; Korich, Jodi A; Fowler, Debra; Keefe, Lisa M

Curricular review is considered a necessary component for growth and enhancement of academic programs and requires time, energy, creativity, and persistence from both faculty and administration. On a larger scale, a comprehensive redesign effort involves forming a dedicated faculty redesign team, developing program learning outcomes, mapping the existing curriculum, and reviewing the curriculum in light of collected stakeholder data. The faculty of the Texas A&M University College of Veterinary Medicine & Biomedical Sciences (TAMU) recently embarked on a comprehensive curriculum redesign effort through partnership with the university's Center for Teaching Excellence. Using a previously developed evidence-based model of program redesign, TAMU created a process for use in veterinary medical education, which is described in detail in the first part of this article series. An additional component of the redesign process that is understated, yet vital for success, is faculty buy-in and support. Without faculty engagement, implementation of data-driven curricular changes stemming from program evaluation may be challenging. This second part of the article series describes the methodology for encouraging faculty engagement through the final steps of the redesign initiative and the lessons learned by TAMU through the redesign process.

ESCRT-II controls retinal axon growth by regulating DCC receptor levels and local protein synthesis

PubMed Central

Konopacki, Filip A.; Dwivedy, Asha; Bellon, Anaïs; Blower, Michael D.

2016-01-01

Endocytosis and local protein synthesis (LPS) act coordinately to mediate the chemotropic responses of axons, but the link between these two processes is poorly understood. The endosomal sorting complex required for transport (ESCRT) is a key regulator of cargo sorting in the endocytic pathway, and here we have investigated the role of ESCRT-II, a critical ESCRT component, in Xenopus retinal ganglion cell (RGC) axons. We show that ESCRT-II is present in RGC axonal growth cones (GCs) where it co-localizes with endocytic vesicle GTPases and, unexpectedly, with the Netrin-1 receptor, deleted in colorectal cancer (DCC). ESCRT-II knockdown (KD) decreases endocytosis and, strikingly, reduces DCC in GCs and leads to axon growth and guidance defects. ESCRT-II-depleted axons fail to turn in response to a Netrin-1 gradient in vitro and many axons fail to exit the eye in vivo. These defects, similar to Netrin-1/DCC loss-of-function phenotypes, can be rescued in whole (in vitro) or in part (in vivo) by expressing DCC. In addition, ESCRT-II KD impairs LPS in GCs and live imaging reveals that ESCRT-II transports mRNAs in axons. Collectively, our results show that the ESCRT-II-mediated endocytic pathway regulates both DCC and LPS in the axonal compartment and suggest that ESCRT-II aids gradient sensing in GCs by coupling endocytosis to LPS. PMID:27248654

Dissecting Diversity Part II

ERIC Educational Resources Information Center

Matthews, Frank

2005-01-01

This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the…

Intelligence-led crime scene processing. Part I: Forensic intelligence.

PubMed

Ribaux, Olivier; Baylon, Amélie; Roux, Claude; Delémont, Olivier; Lock, Eric; Zingg, Christian; Margot, Pierre

2010-02-25

Forensic science is generally defined as the application of science to address questions related to the law. Too often, this view restricts the contribution of science to one single process which eventually aims at bringing individuals to court while minimising risk of miscarriage of justice. In order to go beyond this paradigm, we propose to refocus the attention towards traces themselves, as remnants of a criminal activity, and their information content. We postulate that traces contribute effectively to a wide variety of other informational processes that support decision making in many situations. In particular, they inform actors of new policing strategies who place the treatment of information and intelligence at the centre of their systems. This contribution of forensic science to these security oriented models is still not well identified and captured. In order to create the best condition for the development of forensic intelligence, we suggest a framework that connects forensic science to intelligence-led policing (part I). Crime scene attendance and processing can be envisaged within this view. This approach gives indications about how to structure knowledge used by crime scene examiners in their effective practice (part II). 2009 Elsevier Ireland Ltd. All rights reserved.

40 CFR Appendix B to Subpart II of... - Maximum Allowable Thinning Rates as a Function of As Supplied VOC Content and Thinner Density

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 11 2013-07-01 2013-07-01 false Maximum Allowable Thinning Rates as a Function of As Supplied VOC Content and Thinner Density B Appendix B to Subpart II of Part 63 Protection of... Shipbuilding and Ship Repair (Surface Coating) Pt. 63, Subpt. II, App. B Appendix B to Subpart II of Part 63...

40 CFR Appendix B to Subpart II to... - Maximum Allowable Thinning Rates as a Function of As Supplied VOC Content and Thinner Density

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Maximum Allowable Thinning Rates as a Function of As Supplied VOC Content and Thinner Density B Appendix B to Subpart II to Part 63 Protection of... Shipbuilding and Ship Repair (Surface Coating) Pt. 63, Subpt. II, App. B Appendix B to Subpart II to Part 63...

Analysis of photosystem II biogenesis in cyanobacteria.

PubMed

Heinz, Steffen; Liauw, Pasqual; Nickelsen, Jörg; Nowaczyk, Marc

2016-03-01

Photosystem II (PSII), a large multisubunit membrane protein complex found in the thylakoid membranes of cyanobacteria, algae and plants, catalyzes light-driven oxygen evolution from water and reduction of plastoquinone. Biogenesis of PSII requires coordinated assembly of at least 20 protein subunits, as well as incorporation of various organic and inorganic cofactors. The stepwise assembly process is facilitated by numerous protein factors that have been identified in recent years. Further analysis of this process requires the development or refinement of specific methods for the identification of novel assembly factors and, in particular, elucidation of the unique role of each. Here we summarize current knowledge of PSII biogenesis in cyanobacteria, focusing primarily on the impact of methodological advances and innovations. This article is part of a Special Issue entitled Organization and dynamics of bioenergetic systems in bacteria, edited by Conrad Mullineaux. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of Sterilization Process and Storage on the Antioxidative Properties of Runner Bean.

PubMed

Wołosiak, Rafał; Drużyńska, Beata; Piecyk, Małgorzata; Majewska, Ewa; Worobiej, Elwira

2018-06-11

In this study, we investigated the effect of standard preservation of bean seeds on changes in contents and activity of their selected components: dry matter, ash, different forms of nitrogen, composition of protein fractions; total phenolics and condensed tannins; ability to chelate iron(II) ions; antiradical activity against ABTS •+ and DPPH • ; and capability for inhibiting autoxidation and enzymatic oxidation of linoleic acid. The conducted technological process caused various changes in contents of nitrogen forms and partial loss of phenolic compounds. The antiradical and antioxidative activity of the extracts decreased significantly, while an increase was observed in their ability to chelate Fe(II). These changes were due to the migration of active compounds to the brine, and to their structural transformations and degradation. Longer storage of the sterilized product caused restoration of part of the antiradical activity of the seeds.

The Utilization of the Microflora Indigenous to and Present in Oil-Bearing Formations to Selectively Plug the More Porous Zones Thereby Increasing Oil Recovery During Waterflooding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Lewis R.; Byrnes, Martin J.; Stephens, James O.

This project was designed to demonstrate that a microbially enhanced oil recovery process (MEOR), developed in part under DOE Contract No. DE-AC22-90BC14665, will increase oil recovery from fluvial dominated deltaic oil reservoirs. The process involves stimulating the in-situ indigenous microbial population in the reservoir to grow in the more permeable zones, thus diverting flow to other areas of the reservoir, thereby increasing the effectiveness of the waterflood. This five and a half year project is divided into three phases, Phase I, Planning and Analysis (9 months), Phase II, Implementation (45 months), and Phase III, Technology Transfer (12 months). Phase Imore » was completed and reported in the first annual report. This fifth annual report covers the completion of Phase II and the first six months of Phase III.« less

Experimental power density distribution benchmark in the TRIGA Mark II reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snoj, L.; Stancar, Z.; Radulovic, V.

2012-07-01

In order to improve the power calibration process and to benchmark the existing computational model of the TRIGA Mark II reactor at the Josef Stefan Inst. (JSI), a bilateral project was started as part of the agreement between the French Commissariat a l'energie atomique et aux energies alternatives (CEA) and the Ministry of higher education, science and technology of Slovenia. One of the objectives of the project was to analyze and improve the power calibration process of the JSI TRIGA reactor (procedural improvement and uncertainty reduction) by using absolutely calibrated CEA fission chambers (FCs). This is one of the fewmore » available power density distribution benchmarks for testing not only the fission rate distribution but also the absolute values of the fission rates. Our preliminary calculations indicate that the total experimental uncertainty of the measured reaction rate is sufficiently low that the experiments could be considered as benchmark experiments. (authors)« less

Chimeric Lyssavirus Glycoproteins with Increased Immunological Potential

PubMed Central

Jallet, Corinne; Jacob, Yves; Bahloul, Chokri; Drings, Astrid; Desmezieres, Emmanuel; Tordo, Noël; Perrin, Pierre

1999-01-01

The rabies virus glycoprotein molecule (G) can be divided into two parts separated by a flexible hinge: the NH2 half (site II part) containing antigenic site II up to the linear region (amino acids [aa] 253 to 275 encompassing epitope VI [aa 264]) and the COOH half (site III part) containing antigenic site III and the transmembrane and cytoplasmic domains. The structural and immunological roles of each part were investigated by cell transfection and mouse DNA-based immunization with homogeneous and chimeric G genes formed by fusion of the site II part of one genotype (GT) with the site III part of the same or another GT. Various site II-site III combinations between G genes of PV (Pasteur virus strain) rabies (GT1), Mokola (GT3), and EBL1 (European bat lyssavirus 1 [GT5]) viruses were tested. Plasmids pGPV-PV, pGMok-Mok, pGMok-PV, and pGEBL1-PV induced transient expression of correctly transported and folded antigens in neuroblastoma cells and virus-neutralizing antibodies against parental viruses in mice, whereas, pG-PVIII (site III part only) and pGPV-Mok did not. The site III part of PV (GT1) was a strong inducer of T helper cells and was very effective at presenting the site II part of various GTs. Both parts are required for correct folding and transport of chimeric G proteins which have a strong potential value for immunological studies and development of multivalent vaccines. Chimeric plasmid pGEBL1-PV broadens the spectrum of protection against European lyssavirus genotypes (GT1, GT5, and GT6). PMID:9847325

Unlearning Established Organizational Routines--Part II

ERIC Educational Resources Information Center

Fiol, C. Marlena; O'Connor, Edward J.

2017-01-01

Purpose: The purpose of Part II of this two-part paper is to uncover important differences in the nature of the three unlearning subprocesses, which call for different leadership interventions to motivate people to move through them. Design/methodology/approach: The paper draws on research in behavioral medicine and psychology to demonstrate that…

Delivery of cancer therapeutics to extracellular and intracellular targets: Determinants, barriers, challenges and opportunities.

PubMed

Au, Jessie L-S; Yeung, Bertrand Z; Wientjes, Michael G; Lu, Ze; Wientjes, M Guillaume

2016-02-01

Advances in molecular medicine have led to identification of worthy cellular and molecular targets located in extracellular and intracellular compartments. Effectiveness of cancer therapeutics is limited in part by inadequate delivery and transport in tumor interstitium. Parts I and II of this report give an overview on the kinetic processes in delivering therapeutics to their intended targets, the transport barriers in tumor microenvironment and extracellular matrix (TME/ECM), and the experimental approaches to overcome such barriers. Part III discusses new concepts and findings concerning nanoparticle-biocorona complex, including the effects of TME/ECM. Part IV outlines the challenges in animal-to-human translation of cancer nanotherapeutics. Part V provides an overview of the background, current status, and the roles of TME/ECM in immune checkpoint inhibition therapy, the newest cancer treatment modality. Part VI outlines the development and use of multiscale computational modeling to capture the unavoidable tumor heterogeneities, the multiple nonlinear kinetic processes including interstitial and transvascular transport and interactions between cancer therapeutics and TME/ECM, in order to predict the in vivo tumor spatiokinetics of a therapeutic based on experimental in vitro biointerfacial interaction data. Part VII provides perspectives on translational research using quantitative systems pharmacology approaches. Copyright © 2015 Elsevier B.V. All rights reserved.

A novel TBP-TAF complex on RNA polymerase II-transcribed snRNA genes.

PubMed

Zaborowska, Justyna; Taylor, Alice; Roeder, Robert G; Murphy, Shona

2012-01-01

Initiation of transcription of most human genes transcribed by RNA polymerase II (RNAP II) requires the formation of a preinitiation complex comprising TFIIA, B, D, E, F, H and RNAP II. The general transcription factor TFIID is composed of the TATA-binding protein and up to 13 TBP-associated factors. During transcription of snRNA genes, RNAP II does not appear to make the transition to long-range productive elongation, as happens during transcription of protein-coding genes. In addition, recognition of the snRNA gene-type specific 3' box RNA processing element requires initiation from an snRNA gene promoter. These characteristics may, at least in part, be driven by factors recruited to the promoter. For example, differences in the complement of TAFs might result in differential recruitment of elongation and RNA processing factors. As precedent, it already has been shown that the promoters of some protein-coding genes do not recruit all the TAFs found in TFIID. Although TAF5 has been shown to be associated with RNAP II-transcribed snRNA genes, the full complement of TAFs associated with these genes has remained unclear. Here we show, using a ChIP and siRNA-mediated approach, that the TBP/TAF complex on snRNA genes differs from that found on protein-coding genes. Interestingly, the largest TAF, TAF1, and the core TAFs, TAF10 and TAF4, are not detected on snRNA genes. We propose that this snRNA gene-specific TAF subset plays a key role in gene type-specific control of expression.

Agricultural solid waste for sorption of metal ions, part II: competitive assessment in multielemental solution and lake water.

PubMed

Milani, Priscila Aparecida; Consonni, João Luiz; Labuto, Geórgia; Carrilho, Elma Neide Vasconcelos Martins

2018-03-20

Sugarcane bagasse and hydroponic lettuce roots were used as biosorbents for the removal of Cu(II), Fe(II), Mn(II), and Zn(II) from multielemental solutions and lake water, in batch processes. These biomasses were studied in natura (lettuce roots, NLR, and sugarcane bagasse, NSB) and chemically modified with HNO 3 (lettuce roots, MLR, and sugarcane bagasse, MSB). The results showed higher adsorption efficiency for MSB and either NLR or MLR. The maximum adsorption capacities (q max ) in multielemental solution for Cu(II), Fe(II), Mn(II), and Zn(II) were 35.86, 31.42, 3.33, and 24.07 mg/g for NLR; 25.36, 27.95, 14.06, and 6.43 mg/g for MLR; 0.92, 3.94, 0.03, and 0.18 mg/g for NSB; and 54.11, 6.52, 16.7, and 1.26 mg/g for MSB, respectively. The kinetic studies with chemically modified biomasses indicated that sorption was achieved in the first 5 min and reached equilibrium around 30 min. Sorption of Cu(II), Fe(II), Mn(II), and Zn(II) in lake water by chemically modified biomasses was 24.31, 14.50, 8.03, and 8.21 mg/g by MLR, and 13.15, 10.50, 6.10, and 5.14 mg/g by MSB, respectively. These biosorbents are promising and low costs agricultural residues, and as for lettuce roots, these showed great potential even with no chemical modification.

Utilization of ICP/OES for the determination of trace metal binding to different humic fractions.

PubMed

de la Rosa, G; Peralta-Videa, J R; Gardea-Torresdey, J L

2003-02-28

In this study, the use of inductively coupled plasma/optical emission spectrometry (ICP/OES) to determine multi-metal binding to three biomasses, Sphagnum peat moss, humin and humic acids is reported. All the investigations were performed under part per billion (ppb) concentrations. Batch pH profile experiments were performed using multi-metal solutions of Cd(II), Cu(II), Pb(II), Ni(II), Cr(III) and Cr(VI). The results showed that at pH 2 and 3, the metal affinity of the three biomasses exposed to the multi-metal solution that included Cr(III) presented the following order: Cu(II), Pb(II)>Ni(II)>Cr(III)>Cd(II). On the other hand, when Cr(VI) was in the heavy metal mixture, Sphagnum peat moss and humin showed the following affinity: Cu(II), Pb(II)>Ni(II)>Cr(VI)>Cd(II); however, the affinity of the humic acids was: Cu(II)>Pb(II), Cr(VI)>Ni(II)>Cd(II). The results demonstrated that pH values of 4 and 5 were the most favorable for the heavy metal binding process. At pH 5, all the metals, except for Cr(VI), were bound between 90 and 100% to the three biomasses. However, the binding capacity of humic acids decreased at pH 6 in the presence of Cr(VI). The results showed that the ICP/OES permits the determination of heavy metal binding to organic matter at ppb concentration. These results will be very useful in understanding the role of humic substances in the fate and transport of heavy metals, and thus could provide information to develop new methodologies for the removal of low concentrations of toxic heavy metals from contaminated waters.

Solvent Refined Coal (SRC) process. Research and development report No. 53, interim report No. 29, August-November, 1978. Volume VI. Process development unit studies. Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1980-01-01

This report presents the results of seven SRC-II runs on Process Development Unit P99 feeding Pittsburgh Seam coal. Four of these runs (Runs 41-44) were made feeding coal from the Robinson Run Mine and three (Runs 45-47) were made feeding a second shipment of coal from the Powhatan No. 5 Mine. This work showed that both these coals are satisfactory feedstocks for the SRC-II process. Increasing dissolver outlet hydrogen partial pressure from approximately 1300 to about 1400 psia did not have a significant effect on yields from Robinson Run coal, but simultaneously increasing coal concentration in the feed slurry frommore » 25 to 30 wt% and decreasing the percent recycle solids from 21% to 17% lowered distillate yields. With the Powhatan coal, a modest increase in the boiling temperature (approximately 35/sup 0/F) at the 10% point) of the process solvent had essentially no effect on product yields, while lowering the average dissolver temperature from 851/sup 0/F to 842/sup 0/F reduced gas yield.« less

14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

Code of Federal Regulations, 2010 CFR

2010-01-01

... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

Code of Federal Regulations, 2013 CFR

2013-01-01

... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

Code of Federal Regulations, 2012 CFR

2012-01-01

... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

Code of Federal Regulations, 2014 CFR

2014-01-01

... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

Code of Federal Regulations, 2011 CFR

2011-01-01

... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

40 CFR Appendix B to Subpart A of... - Class II Controlled Substances a

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Class II Controlled Substances a B Appendix B to Subpart A of Part 82 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED..., Subpt. A, App. B Appendix B to Subpart A of Part 82—Class II Controlled Substances a Controlled...

40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Propulsion Marine... Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a) The following duty cycle applies for discrete-mode testing: E4 Mode No. Enginespeed 1 Torque(percent) 2...

40 CFR Appendix II to Part 1039 - Steady-State Duty Cycles

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Steady-State Duty Cycles II Appendix... Appendix II to Part 1039—Steady-State Duty Cycles (a) The following duty cycles apply for constant-speed engines: (1) The following duty cycle applies for discrete-mode testing: D2 mode number Engine speed...

Coordinator(a) de Servicios Clinicos. Parte I (Unidad I-IV). Parte II (Unidad V-VI). Guia. Documento de Trabajo (Clinical Services Coordinator. Part I. Units I-IV. Part II. Units V-VI. Guide. Working Document).

ERIC Educational Resources Information Center

Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

This guide is intended for instructing secondary students in the occupation of clinical services coordinator in a hospital. The first part contains four units on the following subjects: the occupation of clinical services coordinator; interpersonal relationships; ethical/legal aspects; and communications (telephone, intercom, and others). For each…

Oceanography: the present and future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brewer, P.G.

This volume is the proceedings of a symposium held September 29 to October 2, 1980 at Woods Hole, Massachusetts, commemorating the 50th anniversary of the founding of the Woods Hole Oceanographic Institution. The book is the companion volume to ''Oceanography: the Past'' also published by Springer-Verlag. The papers are organized not by conventional disciplinary topics but by the ''scale'' of the oceanographic process: Part I, Small and Local Scale Oceanography; Part II, Regional Scale Oceanography; Part III, Global Scale Oceanography; and Part IV, The Human Scale. The articles presented, however, do not summarize such projects but give recognizable disciplinary summariesmore » and predictions in line with the subtitle of the book. In general, the articles are classed by this scale concept, although ''Shoreline Research'' by Pilkey and ''The Oceans Nearby'' by Murphy are better placed in the section The Human Scale and Bolin's ''Changing Global Biogeochemistry'' switched from The Human Scale to Global Scale as indicated by the title. This volume should be of value to marine geologists and geochemists, sedimentologists, and public-interest (environmental) geologists interested in oceanographic processes.« less

The use of dialdehyde starch derivatives in the phytoremediation of soils contaminated with heavy metals.

PubMed

Antonkiewicz, Jacek; Para, Andrzej

2016-01-01

Products of the reaction between dialdehyde starch and Y-NH2 compounds (e.g. semicarbazide or hydrazine) are effective ligands for metal ions. The usefulness of these derivatives was tested in the experiment, both in terms of the immobilization of heavy metal ions in soil and the potential application in phytoextraction processes. The experimental model comprised maize and the ions of such metals as: Zn(II), Pb(II), Cu(II), Cd(II), and Ni(II). The amount of maize yield, as well as heavy metal content and uptake by the aboveground parts and roots of maize, were studied during a three-year pot experiment. The results of the study indicate the significant impact of heavy metals on reduced yield and increased heavy metal content in maize. Soil-applied dialdehyde starch derivatives resulted in lower yields, particularly disemicarbazone (DASS), but in heavy metal-contaminated soils they largely limited the negative impact of these metals both on yielding and heavy metal content in plants, particularly dihydrazone (DASH). It was demonstrated that the application of dihydrazone (DASH) to a soil polluted with heavy metals boosted the uptake of Zn, Pb, Cu, and Cd from the soil, hence there is a possibility to use this compound in the phytoextraction of these metals from the soil. Decreased Ni uptake was also determined, hence the possibility of using this compound in the immobilization of this metal. The study showed that dialdehyde starch disemicarbazone was ineffective in the discussed processes.

The Physics of Energy

NASA Astrophysics Data System (ADS)

Jaffe, Robert L.; Taylor, Washington

2018-01-01

Part I. Basic Energy Physics and Uses: 1. Introduction; 2. Mechanical energy; 3. Electromagnetic energy; 4. Waves and light; 5. Thermodynamics I: heat and thermal energy; 6. Heat transfer; 7. Introduction to quantum physics; 8. Thermodynamics II: entropy and temperature; 9. Energy in matter; 10. Thermal energy conversion; 11. Internal combustion engines; 12. Phase-change energy conversion; 13. Thermal power and heat extraction cycles; Part II. Energy Sources: 14. The forces of nature; 15. Quantum phenomena in energy systems; 16. An overview of nuclear power; 17. Structure, properties and decays of nuclei; 18. Nuclear energy processes: fission and fusion; 19. Nuclear fission reactors and nuclear fusion experiments; 20. Ionizing radiation; 21. Energy in the universe; 22. Solar energy: solar production and radiation; 23. Solar energy: solar radiation on Earth; 24. Solar thermal energy; 25. Photovoltaic solar cells; 26. Biological energy; 27. Ocean energy flow; 28. Wind: a highly variable resource; 29. Fluids – the basics; 30. Wind turbines; 31. Energy from moving water: hydro, wave, tidal, and marine current power; 32. Geothermal energy; 33. Fossil fuels; Part III. Energy System Issues and Externalities: 34. Energy and climate; 35. Earth's climate: past, present, and future; 36. Energy efficiency, conservation, and changing energy sources; 37. Energy storage; 38. Electricity generation and transmission.

Evaluation of estimated energy conservation measure costs and benefits in the residential multifamily sector

NASA Astrophysics Data System (ADS)

1982-09-01

Supporting data for a policy review to determine how the multifamily buildings subsector is responding to market signals was sought. What role, if any, the federal government should play in encouraging conservation in multifamily buildings is discussed. The policy review seeks to develop an understanding of the current level of and trends in energy conservation activity in multifamily housing. The availability of the required data is determined and information in a form which facilitates its use by policy analysts is compiled. The results are presented in four parts. Part I provides an overview. Part II presents, in tabular form, the cost of selected retrofit items and the resulting energy and cost savings. As an aid to understanding the data in Part II, the salient assumptions underlying the data are also included in this part. Part III describes how the data in Part II were developed.

40 CFR Table II-1 to Subpart II of... - Emission Factors

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Emission Factors II Table II-1 to Subpart II of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment Pt. 98, Subpt. II, Table II-1...

40 CFR Table II-1 to Subpart II of... - Emission Factors

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Emission Factors II Table II-1 to Subpart II of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment Pt. 98, Subpt. II, Table II-1...

42 CFR 423.509 - Termination of contract by CMS.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Part D plan in writing 90 days before the intended date of the termination. (ii) The Part D plan... sponsor; (B) The Part D plan sponsor experiences financial difficulties so severe that its ability to make...)(4) of this section. (ii) CMS notifies the MA organization in writing that its contract will be...

5 CFR 330.602 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... equivalent) or below who: (i) Received a reduction in force (RIF) separation notice under part 351 of this... positions; and (ii) Received a RIF separation notice under part 351 of this chapter or a notice of proposed...); or (ii) Received a RIF notice of separation under part 351 of this chapter or a notice of proposed...

5 CFR 330.602 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... equivalent) or below who: (i) Received a reduction in force (RIF) separation notice under part 351 of this... positions; and (ii) Received a RIF separation notice under part 351 of this chapter or a notice of proposed...); or (ii) Received a RIF notice of separation under part 351 of this chapter or a notice of proposed...

5 CFR 330.602 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... equivalent) or below who: (i) Received a reduction in force (RIF) separation notice under part 351 of this... positions; and (ii) Received a RIF separation notice under part 351 of this chapter or a notice of proposed...); or (ii) Received a RIF notice of separation under part 351 of this chapter or a notice of proposed...

Market Analysis and Consumer Impacts Source Document. Part II. Review of Motor Vehicle Market and Consumer Expenditures on Motor Vehicle Transportation

DOT National Transportation Integrated Search

1980-12-01

This source document on motor vehicle market analysis and consumer impacts consists of three parts. Part II consists of studies and review on: motor vehicle sales trends; motor vehicle fleet life and fleet composition; car buying patterns of the busi...

Calculus of Elementary Functions, Part II. Teacher's Commentary. Revised Edition.

ERIC Educational Resources Information Center

Herriot, Sarah T.; And Others

This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This teacher's guide is for Part II of the course. It is designed to follow Part I of the text. The guide contains background information, suggested instructional…

Calculus of Elementary Functions, Part II. Student Text. Revised Edition.

ERIC Educational Resources Information Center

Herriot, Sarah T.; And Others

This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This text, Part II, contains material designed to follow Part I. Chapters included in this text are: (6) Derivatives of Exponential and Related Functions; (7) Area and…

Microprocessor mediates transcriptional termination of long noncoding RNA transcripts hosting microRNAs.

PubMed

Dhir, Ashish; Dhir, Somdutta; Proudfoot, Nick J; Jopling, Catherine L

2015-04-01

MicroRNAs (miRNAs) play a major part in the post-transcriptional regulation of gene expression. Mammalian miRNA biogenesis begins with cotranscriptional cleavage of RNA polymerase II (Pol II) transcripts by the Microprocessor complex. Although most miRNAs are located within introns of protein-coding transcripts, a substantial minority of miRNAs originate from long noncoding (lnc) RNAs, for which transcript processing is largely uncharacterized. We show, by detailed characterization of liver-specific lnc-pri-miR-122 and genome-wide analysis in human cell lines, that most lncRNA transcripts containing miRNAs (lnc-pri-miRNAs) do not use the canonical cleavage-and-polyadenylation pathway but instead use Microprocessor cleavage to terminate transcription. Microprocessor inactivation leads to extensive transcriptional readthrough of lnc-pri-miRNA and transcriptional interference with downstream genes. Consequently we define a new RNase III-mediated, polyadenylation-independent mechanism of Pol II transcription termination in mammalian cells.

Modified level II streambed-scour analysis for structure I-65-85-5527 crossing Sugar Creek in Johnson County, Indiana

USGS Publications Warehouse

Robinson, B.A.; Voelker, D.C.; Miller, R.L.

1997-01-01

Level II scour evaluations follow a process in which hydrologic, hydraulic, and sediment transport data are evaluated to calculate the depth of scour that may result when a given discharge is routed through a bridge opening. The results of the modified Level II analysis for structure 1-65-85-5527 on Interstate 65 crossing Sugar Creek in Johnson County, Indiana, are presented. The site is near the town of Amity in the southeastern part of Johnson County. Scour depths were computed with the Water Surface PROfile model, version V050196, which incorporates the scour-calculation procedures outlined in Hydraulic Engineering Circular No. 18. Total scour depths at the piers were approximately 26.8 feet for the modeled discharge of 26,000 cubic feet per second and approximately 30.8 feet for the modeled discharge of 34,100 cubic feet per second

Modified level II streambed-scour analysis for structure I-74-32-4946 crossing Sugar Creek in Montgomery County, Indiana

USGS Publications Warehouse

Miller, R.L.; Robinson, B.A.; Voelker, D.C.

1997-01-01

Level II scour evaluations follow a process in which hydrologic, hydraulic, and sedient-transport data are evaluated to calculate the depth of scour that may result when given discharge is routed through a bridge opening. The results of the modified Levell II analysis for structure I-74-32-4946 on Interstate 74 crossing Sugar Creek in Montgomery County, Indiana are presented. The site is near the town of Crawfordsville in the central part of Montgomery County. Scour depths were computed with the Water Surface PROfile model, version V050196, which incorporates the scour-calculation procedures outlined in Hydraulic Engineering Circular No. 18. Total scour depths at the piers were approximately 13.0 feet for the modeled discharge of 3,000  cubic feet per second and approximately 15.1 feet for the modeled discharge of 41,900 cubic feet per second.

Strawman II. Recommendations for a regulatory program for mining waste and materials under Subtitle D of the Resource Conservation and Recovery Act. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-05-21

The package, referred to as 'Strawman II', is a working document that represents EPA's latest staff position on an effective program to regulate wastes and other materials uniquely associated with noncoal mining. Strawman II does not represent a proposed rule. The package consists of two parts: (1) the Foreward, which describes the pre-rulemaking Strawman process, a background and overview of the mining waste program as envisioned in the package, and discussions of major issues concerning the program and its scope; and (2) the Regulatory Approach, presented as '40 CFR XXX, XXY, and XXZ' to reflect how the program might appearmore » in regulatory language. Discussions and amplifications of specific points are also interspersed throughout the Regulatory Approach. EPA encourages all interested parties to convey their views on any and all aspects of the program concept.« less

Diagnostics for a waste processing plasma arc furnace (invited) (abstract)a)

NASA Astrophysics Data System (ADS)

Woskov, P. P.

1995-01-01

Maintaining the quality of our environment has become an important goal of society. As part of this goal new technologies are being sought to clean up hazardous waste sites and to treat ongoing waste streams. A 1 MW pilot scale dc graphite electrode plasma arc furnace (Mark II) has been constructed at MIT under a joint program among Pacific Northwest Laboratory (PNL), MIT, and Electro-Pyrolysis, Inc. (EPI)c) for the remediation of buried wastes in the DOE complex. A key part of this program is the development of new and improved diagnostics to study, monitor, and control the entire waste remediation process for the optimization of this technology and to safeguard the environment. Continuous, real time diagnostics are needed for a variety of the waste process parameters. These parameters include internal furnace temperatures, slag fill levels, trace metals content in the off-gas stream, off-gas molecular content, feed and slag characterization, and off-gas particulate size, density, and velocity distributions. Diagnostics are currently being tested at MIT for the first three parameters. An active millimeter-wave radiometer with a novel, rotatable graphite waveguide/mirror antenna system has been implemented on Mark II for the measurement of surface emission and emissivity which can be used to determine internal furnace temperatures and fill levels. A microwave torch plasma is being evaluated for use as a excitation source in the furnace off-gas stream for continuous atomic emission spectroscopy of trace metals. These diagnostics should find applicability not only to waste remediation, but also to other high temperature processes such as incinerators, power plants, and steel plants.

Continental shelf processes affecting the oceanography of the South Atlantic Bight: Progress report, June 1, 1987 to May 31, 1988. [FLEX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atkinson, L.P.

This study of continental shelf processes affecting the oceanography of the South Atlantic Bight (SAB) is part of the interdisciplinary DOE-sponsored South Atlantic Bight Program. Our part of the program involves hydrographic and nutrient characteristics of the region. Current research efforts in the SAB Program are being focused on the inner shelf region where effects of bottom friction, local wind forcing, river and estuarine discharge, and tides, which are all small scale processes, are important. Our major accomplishment during the past year was the completion of the FLEX (Fall Experiment) field study. Since most of our data collection is computerized,more » preliminary hydrographic data analysis was done on board ship during the cruise and preliminary results are available. These results will be presented in this report. We are just beginning our standard data processing and data analysis procedures. We continued the processing and analysis of SPREX data collected during April 1985. Work has also continued on the older GABEX I and II data sets. 8 refs., 19 figs., 2 tabs.« less

A Guide to IRUS-II Application Development

DTIC Science & Technology

1989-09-01

Stallard (editors). Research and Develo; nent in Natural Language b’nderstan,;ng as Part of t/i Strategic Computing Program . chapter 3, pages 27-34...Development in Natural Language Processing in the Strategic Computing Program . Compi-nrional Linguistics 12(2):132-136. April-June, 1986. [24] Sidner. C.L...assist developers interested in adapting IRUS-11 to new application domains Chapter 2 provides a general introduction and overviev ,. Chapter 3 describes

Verification of Concurrent Programs. Part II. Temporal Proof Principles.

DTIC Science & Technology

1981-09-01

not modify any of the shared program variables. In order to ensure the correct synchronization between the processes we use three semaphore variables...direct, simple, and intuitive rides for the establishment of these properties. rhey usually replace long but repetitively similar chains of primitive ...modify the variables on which Q actually depends. A typical case is that of semaphores . We have the following property: The Semaphore Variable Rule

Trends in lumber processing in the Western United States. Part II: Overrun and lumber recovery factors.

Treesearch

Charles E. Keegan; Todd A. Morgan; Keith A. Blatner; Jean M. Daniels

2010-01-01

This article describes trends in three measures of lumber recovery for sawmills in the western United States: lumber overrun (LO), lumber recovery factor (LRF), and cubic lumber recovery (CLR). All states and regions showed increased LO during the last three decades. Oregon and Montana had the highest LO at 107 and 100 percent, respectively. Alaska had the lowest LO at...

Environmental Impact Analysis Process. Deployment Area Selection and Land Withdrawal/Acquisition DEIS. Chapter III. Part II. Affected Environment.

DTIC Science & Technology

1980-12-01

tridentata, A. nova, and A. arbriscula), sticky-leaved rabbitbrush (Chrysothamnus viscidiflorus) and Mormon tea ( Ephedra viridis ). The Sevier River contains...Chrysothamnus nauseosus), and Mormon tea ( Ephedra spp). Shifts in dominance occur locally in response to topographic and geographic variances. In general...divaricata), Nevada ephedra ( Ephedra nevadensis), Mojave yucca (Yucca schidigera), and spiny menodora (Menodora spinescens). Creosote brush scrub occurs

Modelling the drying of three-dimensional pulp moulded structures. Part II, Drying data obtained from flat panels using virgin and recycled paper fibre

Treesearch

John F. Hunt; Margit Tamasy-Bano; Heike Nyist

1999-01-01

A three-dimensional structural panel, called FPL Spaceboard, was developed at the USDA Forest Products Laboratory. Spaceboard panels have been formed using a variety of fibrous materials using either a wet- or dry-forming process. Geometrically, the panel departs from the traditional two-dimensional flat panel by integrally forming an array of perpendicular ribs and...

Cognitive Styles and the Social Order. Final Report, Part II. O.E.O. Study B00-5135, "Thought, Race, and Opportunity."

ERIC Educational Resources Information Center

TenHouten, Warren D.

This report presents data developed for testing the theory that there are social processes which result in differing cognitive styles for subdominant and dominant social groups. The results of surveys of black and white persons in an urban area, of white rural farmers, and Hopi Indians are presented. The research attempts to integrate data and…

Feature Reinforcement Learning: Part I. Unstructured MDPs

NASA Astrophysics Data System (ADS)

Hutter, Marcus

2009-12-01

General-purpose, intelligent, learning agents cycle through sequences of observations, actions, and rewards that are complex, uncertain, unknown, and non-Markovian. On the other hand, reinforcement learning is well-developed for small finite state Markov decision processes (MDPs). Up to now, extracting the right state representations out of bare observations, that is, reducing the general agent setup to the MDP framework, is an art that involves significant effort by designers. The primary goal of this work is to automate the reduction process and thereby significantly expand the scope of many existing reinforcement learning algorithms and the agents that employ them. Before we can think of mechanizing this search for suitable MDPs, we need a formal objective criterion. The main contribution of this article is to develop such a criterion. I also integrate the various parts into one learning algorithm. Extensions to more realistic dynamic Bayesian networks are developed in Part II (Hutter, 2009c). The role of POMDPs is also considered there.

The year 2012 in the European Heart Journal-Cardiovascular Imaging. Part II.

PubMed

Plein, Sven; Knuuti, Juhani; Edvardsen, Thor; Saraste, Antti; Piérard, Luc A; Maurer, Gerald; Lancellotti, Patrizio

2013-07-01

The part II of the best of the European Heart Journal - Cardiovascular Imaging in 2012 specifically focuses on studies of valvular heart diseases, heart failure, cardiomyopathies, and congenital heart diseases.

Quantum Social Science

NASA Astrophysics Data System (ADS)

Haven, Emmanuel; Khrennikov, Andrei

2013-01-01

Preface; Part I. Physics Concepts in Social Science? A Discussion: 1. Classical, statistical and quantum mechanics: all in one; 2. Econophysics: statistical physics and social science; 3. Quantum social science: a non-mathematical motivation; Part II. Mathematics and Physics Preliminaries: 4. Vector calculus and other mathematical preliminaries; 5. Basic elements of quantum mechanics; 6. Basic elements of Bohmian mechanics; Part III. Quantum Probabilistic Effects in Psychology: Basic Questions and Answers: 7. A brief overview; 8. Interference effects in psychology - an introduction; 9. A quantum-like model of decision making; Part IV. Other Quantum Probabilistic Effects in Economics, Finance and Brain Sciences: 10. Financial/economic theory in crisis; 11. Bohmian mechanics in finance and economics; 12. The Bohm-Vigier Model and path simulation; 13. Other applications to economic/financial theory; 14. The neurophysiological sources of quantum-like processing in the brain; Conclusion; Glossary; Index.

Building human resources capability in health care: a global analysis of best practice--Part III.

PubMed

Zairi, M

1998-01-01

This is the last part of a series of three papers which discussed very comprehensively best practice applications in human resource management by drawing special inferences to the healthcare context. It emerged from parts I and II that high performing organisations plan and intend to build sustainable capability through a systematic consideration of the human element as the key asset and through a continuous process of training, developing, empowering and engaging people in all aspects of organisational excellence. Part III brings this debate to a close by demonstrating what brings about organisational excellence and proposes a road map for effective human resource development and management, based on world class standards. Healthcare human resource professionals can now rise to the challenge and plan ahead for building organisational capability and sustainable performance.

Caring communications: how technology enhances interpersonal relations, Part II.

PubMed

Simpson, Roy L

2008-01-01

Part I of this 2-part series about technology's role in interpersonal communications examined how humans interact; proposed a caring theory of communication, collaboration, and conflict resolution; and delineated ways that technology--in general--supports this carative model of interpersonal relations. Part II will examine the barriers to adoption of carative technologies, describe the core capabilities required to overcome them, and discuss specific technologies that can support carative interpersonal relationships.

The new production theory for health care through clinical reengineering: a study of clinical guidelines--Part I.

PubMed

Sharp, J R

1994-12-01

Drucker writes that the emerging theory of manufacturing includes four principles and practices: statistical quality control, manufacturing accounting, modular organization, and systems approach. SQC is a rigorous, scientific method of identifying variation in the quality and productivity of a given production process, with an emphasis on improvement. The new manufacturing economics intends to integrate the production strategy with the business strategy in order to account for the biggest portions of costs that the old methods did not assess: time and automation. Production operations that are both standardized and flexible will allow the organization to keep up with changes in design, technology, and the market. The return on innovation in this environment is predicated on a modular arrangement of flexible steps in the process. Finally, the systems approach sees the entire process as being integrated in converting goods or services into economic satisfaction. There is now a major restructuring of the U.S. health care industry, and the incorporation of these four theories into health care reform would appear to be essential. This two-part article will address two problems: Will Drucker's theories relate to health care (Part I)? Will the "new manufacturing" in health care (practice guidelines) demonstrate cost, quality, and access changes that reform demands (Part II)?

Simulation and experimental studies of operators` decision styles and crew composition while using an ecological and traditional user interface for the control room of a nuclear power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meshkati, N.; Buller, B.J.; Azadeh, M.A.

1995-04-01

The goal of this research is threefold: (1) use of the Skill-, Rule-, and Knowledge-based levels of cognitive control -- the SRK framework -- to develop an integrated information processing conceptual framework (for integration of workstation, job, and team design); (2) to evaluate the user interface component of this framework -- the Ecological display; and (3) to analyze the effect of operators` individual information processing behavior and decision styles on handling plant disturbances plus their performance on, and preference for, Traditional and Ecological user interfaces. A series of studies were conducted. In Part I, a computer simulation model and amore » mathematical model were developed. In Part II, an experiment was designed and conducted at the EBR-II plant of the Argonne National Laboratory-West in Idaho Falls, Idaho. It is concluded that: the integrated SRK-based information processing model for control room operations is superior to the conventional rule-based model; operators` individual decision styles and the combination of their styles play a significant role in effective handling of nuclear power plant disturbances; use of the Ecological interface results in significantly more accurate event diagnosis and recall of various plant parameters, faster response to plant transients, and higher ratings of subject preference; and operators` decision styles affect on both their performance and preference for the Ecological interface.« less

Kick, Glide, Pole! Cross-Country Skiing Fun (Part II)

ERIC Educational Resources Information Center

Duoos, Bridget A.

2012-01-01

Part I of Kick, Glide, Pole! Cross-Country Skiing Fun, which was published in last issue, discussed how to select cross-country ski equipment, dress for the activity and the biomechanics of the diagonal stride. Part II focuses on teaching the diagonal stride technique and begins with a progression of indoor activities. Incorporating this fun,…

An Occupation and Participation Approach to Reading Intervention (OPARI) Part II: Pilot Clinical Application

ERIC Educational Resources Information Center

Grajo, Lenin C.; Candler, Catherine

2016-01-01

The Occupation and Participation Approach to Reading Intervention (OPARI) is an intervention approach for children with reading difficulties that emphasizes reading as an important occupation of children. Part I presented the theoretical basis of the OPARI. Part II describes a pilot clinical application of the OPARI. Guided by Schkade and…

Screening tool for oropharyngeal dysphagia in stroke - Part I: evidence of validity based on the content and response processes.

PubMed

Almeida, Tatiana Magalhães de; Cola, Paula Cristina; Pernambuco, Leandro de Araújo; Magalhães, Hipólito Virgílio; Magnoni, Carlos Daniel; Silva, Roberta Gonçalves da

2017-08-17

The aim of the present study was to identify the evidence of validity based on the content and response process of the Rastreamento de Disfagia Orofaríngea no Acidente Vascular Encefálico (RADAVE; "Screening Tool for Oropharyngeal Dysphagia in Stroke"). The criteria used to elaborate the questions were based on a literature review. A group of judges consisting of 19 different health professionals evaluated the relevance and representativeness of the questions, and the results were analyzed using the Content Validity Index. In order to evidence validity based on the response processes, 23 health professionals administered the screening tool and analyzed the questions using a structured scale and cognitive interview. The RADAVE structured to be applied in two stages. The first version consisted of 18 questions in stage I and 11 questions in stage II. Eight questions in stage I and four in stage II did not reach the minimum Content Validity Index, requiring reformulation by the authors. The cognitive interview demonstrated some misconceptions. New adjustments were made and the final version was produced with 12 questions in stage I and six questions in stage II. It was possible to develop a screening tool for dysphagia in stroke with adequate evidence of validity based on content and response processes. Both validity evidences obtained so far allowed to adjust the screening tool in relation to its construct. The next studies will analyze the other evidences of validity and the measures of accuracy.

Efficacy and Safety of Ashwagandha (Withania somnifera (L.) Dunal) Root Extract in Improving Memory and Cognitive Functions.

PubMed

Choudhary, Dnyanraj; Bhattacharyya, Sauvik; Bose, Sekhar

2017-11-02

Cognitive decline is often associated with the aging process. Ashwagandha (Withania somnifera (L.) Dunal) has long been used in the traditional Ayurvedic system of medicine to enhance memory and improve cognition. This pilot study was designed to evaluate the efficacy and safety of ashwagandha (Withania somnifera (L.) Dunal) in improving memory and cognitive functioning in adults with mild cognitive impairment (MCI). A prospective, randomized, double-blind, placebo-controlled study was conducted in 50 adults. Subjects were treated with either ashwagandha-root extract (300 mg twice daily) or placebo for eight weeks. After eight weeks of study, the ashwagandha treatment group demonstrated significant improvements compared with the placebo group in both immediate and general memory, as evidenced by Wechsler Memory Scale III subtest scores for logical memory I (p = 0.007), verbal paired associates I (p = 0.042), faces I (p = 0.020), family pictures I (p = 0.006), logical memory II (p = 0.006), verbal paired associates II (p = 0.031), faces II (p = 0.014), and family pictures II (p = 0.006). The treatment group also demonstrated significantly greater improvement in executive function, sustained attention, and information-processing speed as indicated by scores on the Eriksen Flanker task (p = 0.002), Wisconsin Card Sort test (p = 0.014), Trail-Making test part A (p = 0.006), and the Mackworth Clock test (p = 0.009). Ashwagandha may be effective in enhancing both immediate and general memory in people with MCI as well as improving executive function, attention, and information processing speed.

76 FR 17781 - Guidance Under Section 1502; Amendment of Matching Rule for Certain Gains on Member Stock...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

... for part 1 continues to read in part as follows: Authority: 26 U.S.C. 7805. * * * 0 Par. 2. Section 1.1502-13 is amended by revising paragraphs (c)(6)(ii)(C)(2) and (c)(6)(ii)(D)(1) to read as follows: Sec. 1.1502-13 Intercompany transactions. * * * * * (c) * * * (6) * * * (ii) * * * (C) * * * (2) Effect...

Corporate liability: security and violence--Part II.

PubMed

Fiesta, J

1996-04-01

A hospital can be held liable for injuries resulting from failure to provide adequate, reasonable security Part II of "corporate Liability: Security and Violence" addresses negligent hiring and supervision practices, injury and domestic violence in the workplace and communication procedures.

Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

ERIC Educational Resources Information Center

Perkins, W. D.

1987-01-01

This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

Interim waste storage for the Integral Fast Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benedict, R.W.; Phipps, R.D.; Condiff, D.W.

1991-01-01

The Integral Fast Reactor (IFR), which Argonne National Laboratory is developing, is an innovative liquid metal breeder reactor that uses metallic fuel and has a close coupled fuel recovery process. A pyrochemical process is used to separate the fission products from the actinide elements. These actinides are used to make new fuel for the reactor. As part of the overall IFR development program, Argonne has refurbished an existing Fuel Cycle Facility at ANL-West and is installing new equipment to demonstrate the remote reprocessing and fabrication of fuel for the Experimental Breeder Reactor II (EBR-II). During this demonstration the wastes thatmore » are produced will be treated and packaged to produce waste forms that would be typical of future commercial operations. These future waste forms would, assuming Argonne development goals are fulfilled, be essentially free of long half-life transuranic isotopes. Promising early results indicate that actinide extraction processes can be developed to strip these isotopes from waste stream and return them to the IFR type reactors for fissioning. 1 fig.« less

Sporting Goods. Part I: Hunting and Fishing Equipment and Part II: Athletic, Marine, and Camping Equipment. A Distributive Education Manual.

ERIC Educational Resources Information Center

Day, Bill D., Comp.

These manuals were prepared to introduce students to the fundamentals of hunting and fishing (Part I) and sports requiring athletic, marine and camping equipment (Part II). The sports salesman is in the position of offering a service to the customer, and he can best do so by understanding the sports and the variety of products which may be sold to…

Interactive Macroeconomics

NASA Astrophysics Data System (ADS)

Di Guilmi, Corrado; Gallegati, Mauro; Landini, Simone

2017-04-01

Preface; List of tables; List of figures, 1. Introduction; Part I. Methodological Notes and Tools: 2. The state space notion; 3. The master equation; Part II. Applications to HIA Based Models: 4. Financial fragility and macroeconomic dynamics I: heterogeneity and interaction; 5. Financial fragility and macroeconomic Dynamics II: learning; Part III. Conclusions: 6. Conclusive remarks; Part IV. Appendices and Complements: Appendix A: Complements to Chapter 3; Appendix B: Solving the ME to solve the ABM; Appendix C: Specifying transition rates; Index.

Design of two-dimensional channels with prescribed velocity distributions along the channel walls

NASA Technical Reports Server (NTRS)

Stanitz, John D

1953-01-01

A general method of design is developed for two-dimensional unbranched channels with prescribed velocities as a function of arc length along the channel walls. The method is developed for both compressible and incompressible, irrotational, nonviscous flow and applies to the design of elbows, diffusers, nozzles, and so forth. In part I solutions are obtained by relaxation methods; in part II solutions are obtained by a Green's function. Five numerical examples are given in part I including three elbow designs with the same prescribed velocity as a function of arc length along the channel walls but with incompressible, linearized compressible, and compressible flow. One numerical example is presented in part II for an accelerating elbow with linearized compressible flow, and the time required for the solution by a Green's function in part II was considerably less than the time required for the same solution by relaxation methods in part I.

A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling.

PubMed

Deng, Qianwang; Gong, Guiliang; Gong, Xuran; Zhang, Like; Liu, Wei; Ren, Qinghua

2017-01-01

Flexible job-shop scheduling problem (FJSP) is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP) characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II) for multiobjective FJSP (MO-FJSP) with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N , in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed.

A Bee Evolutionary Guiding Nondominated Sorting Genetic Algorithm II for Multiobjective Flexible Job-Shop Scheduling

PubMed Central

Deng, Qianwang; Gong, Xuran; Zhang, Like; Liu, Wei; Ren, Qinghua

2017-01-01

Flexible job-shop scheduling problem (FJSP) is an NP-hard puzzle which inherits the job-shop scheduling problem (JSP) characteristics. This paper presents a bee evolutionary guiding nondominated sorting genetic algorithm II (BEG-NSGA-II) for multiobjective FJSP (MO-FJSP) with the objectives to minimize the maximal completion time, the workload of the most loaded machine, and the total workload of all machines. It adopts a two-stage optimization mechanism during the optimizing process. In the first stage, the NSGA-II algorithm with T iteration times is first used to obtain the initial population N, in which a bee evolutionary guiding scheme is presented to exploit the solution space extensively. In the second stage, the NSGA-II algorithm with GEN iteration times is used again to obtain the Pareto-optimal solutions. In order to enhance the searching ability and avoid the premature convergence, an updating mechanism is employed in this stage. More specifically, its population consists of three parts, and each of them changes with the iteration times. What is more, numerical simulations are carried out which are based on some published benchmark instances. Finally, the effectiveness of the proposed BEG-NSGA-II algorithm is shown by comparing the experimental results and the results of some well-known algorithms already existed. PMID:28458687

Angiotensin II activates collagen type I gene in the renal vasculature of transgenic mice during inhibition of nitric oxide synthesis: evidence for an endothelin-mediated mechanism.

PubMed

Boffa, J J; Tharaux, P L; Placier, S; Ardaillou, R; Dussaule, J C; Chatziantoniou, C

1999-11-02

Hypertension is frequently associated with renal vascular fibrosis. The purpose of this study was to investigate whether angiotensin II (Ang II) is involved in this fibrogenic process. Experiments were performed on transgenic mice harboring the luciferase gene under the control of the collagen I-alpha(2) chain promoter [procolalpha(2)(I)]. Hypertension was induced by chronic inhibition of NO synthesis (N(G)-nitro-L-arginine methyl ester, L-NAME). Procolalpha(2)(I) activity started to increase in the renal vasculature after 4 weeks of L-NAME treatment (P<0.01) and at 14 weeks reached 3- and 8-fold increases over control in afferent arterioles and glomeruli, respectively (P<0.001). Losartan, an AT(1) receptor antagonist, given simultaneously with L-NAME prevented the increase of procolalpha(2)(I) levels and attenuated the development of renal vascular fibrosis without normalizing systolic pressure increase. Because we found previously that endothelin mediated renal vascular fibrosis in the L-NAME model, the interaction between Ang II, endothelin, and procolalpha(2)(I) was investigated in ex vivo and short-term in vivo experiments. In both conditions, the Ang II-induced activation of procolalpha(2)(I) in renal cortex was blocked by an endothelin receptor antagonist. During chronic inhibition of NO, the collagen I gene becomes activated, leading to the development of renal vascular fibrosis. Ang II is a major player in this fibrogenic process, and its effect on collagen I gene is independent of systemic hemodynamics and is at least partly mediated by the profibrogenic action of endothelin.

Hybrid generative-discriminative approach to age-invariant face recognition

NASA Astrophysics Data System (ADS)

Sajid, Muhammad; Shafique, Tamoor

2018-03-01

Age-invariant face recognition is still a challenging research problem due to the complex aging process involving types of facial tissues, skin, fat, muscles, and bones. Most of the related studies that have addressed the aging problem are focused on generative representation (aging simulation) or discriminative representation (feature-based approaches). Designing an appropriate hybrid approach taking into account both the generative and discriminative representations for age-invariant face recognition remains an open problem. We perform a hybrid matching to achieve robustness to aging variations. This approach automatically segments the eyes, nose-bridge, and mouth regions, which are relatively less sensitive to aging variations compared with the rest of the facial regions that are age-sensitive. The aging variations of age-sensitive facial parts are compensated using a demographic-aware generative model based on a bridged denoising autoencoder. The age-insensitive facial parts are represented by pixel average vector-based local binary patterns. Deep convolutional neural networks are used to extract relative features of age-sensitive and age-insensitive facial parts. Finally, the feature vectors of age-sensitive and age-insensitive facial parts are fused to achieve the recognition results. Extensive experimental results on morphological face database II (MORPH II), face and gesture recognition network (FG-NET), and Verification Subset of cross-age celebrity dataset (CACD-VS) demonstrate the effectiveness of the proposed method for age-invariant face recognition well.

Stem mortality in surface fires: Part II, experimental methods for characterizing the thermal response of tree stems to heating by fires

Treesearch

D. M. Jimenez; B. W. Butler; J. Reardon

2003-01-01

Current methods for predicting fire-induced plant mortality in shrubs and trees are largely empirical. These methods are not readily linked to duff burning, soil heating, and surface fire behavior models. In response to the need for a physics-based model of this process, a detailed model for predicting the temperature distribution through a tree stem as a function of...

I. Cognitive and Instructional Factors Relating to Students' Development of Personal Models of Chemical Systems in the General Chemistry Laboratory II. Solvation in Supercritical Carbon Dioxide/Ethanol Mixtures Studied by Molecular Dynamics Simulation

ERIC Educational Resources Information Center

Anthony, Seth

2014-01-01

Part I: Students' participation in inquiry-based chemistry laboratory curricula, and, in particular, engagement with key thinking processes in conjunction with these experiences, is linked with success at the difficult task of "transfer"--applying their knowledge in new contexts to solve unfamiliar types of problems. We investigate…

Refining of Military Jet Fuels from Shale Oil. Part II. Volume III. Above Ground Shale Oil Process Data.

DTIC Science & Technology

1982-03-01

system. Regenerator flue gas composi- tion, spent catalyst carbon content and regenerated cata- lyst content are monitored for material balance purposes...and good material balance closures obtained. During each run pro- duct gas samples, regenerator flue gas samples, spent and -85- regenerated...TEMPERATURE DEPENDENCE OF DENITROGENATION AT 2 LHSV ON CO/MO ......................... 26 111-2 TEMPERATURE DEPENDENCE OF DESULFURIZATION AT 2 LHSV ON

[Resistant starches. Part II. Physico-chemical and technological aspects solution medico-biological problems].

PubMed

Iur'ev, V P; Gapparov, M M; Vasserman, L A; Genkina, N K

2006-01-01

This paper is a review of the recent literature data related to structure, composition and physico-chemical properties of starches as well as the special methods of processing of the starch containing raw sources producing the food products with increasing content of resistant starches. The prognosis is made about usefulness of such resistant starches for control of some metabolic disorder in human organism and for prophylactic aims.

40 CFR Appendix II to Part 257 - Appendix II to Part 257

Code of Federal Regulations, 2014 CFR

2014-07-01

... are only add-on in nature. Beta ray irradiation: Sludge is irradiated with beta rays from an accelerator at dosages of at least 1.0 megarad at room temperature (ca. 20 °C). Gamma ray irradiation: Sludge...

40 CFR Appendix II to Part 257 - Appendix II to Part 257

Code of Federal Regulations, 2010 CFR

2010-07-01

... are only add-on in nature. Beta ray irradiation: Sludge is irradiated with beta rays from an accelerator at dosages of at least 1.0 megarad at room temperature (ca. 20 °C). Gamma ray irradiation: Sludge...

40 CFR Appendix II to Part 257 - Appendix II to Part 257

Code of Federal Regulations, 2011 CFR

2011-07-01

... are only add-on in nature. Beta ray irradiation: Sludge is irradiated with beta rays from an accelerator at dosages of at least 1.0 megarad at room temperature (ca. 20 °C). Gamma ray irradiation: Sludge...

40 CFR Appendix II to Part 257 - Appendix II to Part 257

Code of Federal Regulations, 2012 CFR

2012-07-01

... are only add-on in nature. Beta ray irradiation: Sludge is irradiated with beta rays from an accelerator at dosages of at least 1.0 megarad at room temperature (ca. 20 °C). Gamma ray irradiation: Sludge...

40 CFR Appendix II to Part 257 - Appendix II to Part 257

Code of Federal Regulations, 2013 CFR

2013-07-01

... are only add-on in nature. Beta ray irradiation: Sludge is irradiated with beta rays from an accelerator at dosages of at least 1.0 megarad at room temperature (ca. 20 °C). Gamma ray irradiation: Sludge...

Higher Education in Poland Part II: Rules of Admissions, Student Activities, and Curriculums. Bulletin, 1964, No. 22. OE-14099

ERIC Educational Resources Information Center

Rosen, Seymour M.; Apanasewicz, Nellie

1964-01-01

The previously published "Higher Education in Poland, Part I: Organization and Administration," and the present volume constitute an Office of Education study on the Polish system of higher learning. Part II explains the functioning of Polish institutions under control of the Ministry of Higher Education and other ministries, and…

The Mental Health Recovery Movement and Family Therapy, Part II: A Collaborative, Appreciative Approach for Supporting Mental Health Recovery

ERIC Educational Resources Information Center

Gehart, Diane R.

2012-01-01

A continuation of Part I, which introduced mental health recovery concepts to family therapists, Part II of this article outlines a collaborative, appreciative approach for working in recovery-oriented contexts. This approach draws primarily upon postmodern therapies, which have numerous social justice and strength-based practices that are easily…

Institutional Self-Analysis and Long-Range Planning in a Small Liberal Arts College. Part II-- Study Procedure.

ERIC Educational Resources Information Center

Frame, Stanley M.

In the Spring of 1969, Bethany Nazarene College started an intensive self evaluation effort, called the Ten-Year Advance Study. Part I of the report, the Study Design, was published in October 1969. This study, Part II, relates the study activities, the methodology, and sources consulted. The effort involved over 120 administrators, faculty,…

Learning To Read with Private Pete & Sailor Sam in World War II.

ERIC Educational Resources Information Center

Sticht, Thomas G.

Since thousands of the men who entered military service during World War II were illiterate, the Army developed an "Army Reader," a four-part series featuring Private Pete, that led learners through literacy levels 1-4. Part 1 introduced Private Pete and talked about the things the men experienced when they entered the Army. Part 2…

Respiratory chain complex II as general sensor for apoptosis.

PubMed

Grimm, Stefan

2013-05-01

I review here the evidence that complex II of the respiratory chain (RC) constitutes a general sensor for apoptosis induction. This concept emerged from work on neurodegenerative diseases and from recent data on metabolic alterations in cancer cells affecting the RC and in particular on mutations of complex II subunits. It is also supported by experiments with many anticancer compounds that compared the apoptosis sensitivities of complex II-deficient versus WT cells. These results are explained by the mechanistic understanding of how complex II mediates the diverse range of apoptosis signals. This protein aggregate is specifically activated for apoptosis by pH change as a common and early feature of dying cells. This leads to the dissociation of its SDHA and SDHB subunits from the remaining membrane-anchored subunits and the consequent block of it enzymatic SQR activity, while its SDH activity, which is contained in the SDHA/SDHB subcomplex, remains intact. The uncontrolled SDH activity then generates excessive amounts of reactive oxygen species for the demise of the cell. Future studies on these mitochondrial processes will help refine this model, unravel the contribution of mutations in complex II subunits as the cause of degenerative neurological diseases and tumorigenesis, and aid in discovering novel interference options. This article is part of a Special Issue entitled: Respiratory complex II: Role in cellular physiology and disease. Copyright © 2012 Elsevier B.V. All rights reserved.

An exploratory study of live vs. web-based delivery of a phlebotomy program.

PubMed

Fydryszewski, Nadine A; Scanlan, Craig; Guiles, H Jesse; Tucker, Ann

2010-01-01

Changes in student population and increased Web-based education offerings provided the impetus to assess pedagogy, cognitive outcomes and perceptions of course quality. This study explored cognitive outcomes and students' perception of course quality related to the Seven Principles for Good Practice in Undergraduate Education between live classroom delivery, compared to a Web-based delivery of a phlebotomy program. Quasi-experimental; students self-selected to enroll in live or Web-based program. For cognitive outcomes, no significant difference was found between the groups. Student perception of course quality differed only for Principle One (student-instructor contact). Students in the live classroom rated Principle One higher for the Part I course compared to the Web-based group. For the Part II course, there was no significant difference in perception of course quality related to any of the Seven Principles. The more constructivist pedagogy in the Part II course did not improve cognitive outcomes however, it may have contributed to knowledge retention. The live group rated Principle One in the Part II course evaluation relatively the same as they did for the Part I course evaluation. However, the Web-based group rated Principle One considerable higher for the Part II course than for Part I course. Future studies with a larger sample could explore improved course quality assessment instruments.

KSC-02pd0031

NASA Image and Video Library

2002-01-17

KENNEDY SPACE CENTER, FLA. -- Workers in the Vertical Processing Facility help guide the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System onto a payload carrier. NICMOS II is part of the payload on mission STS-109, the Hubble Servicing Telescope Mission. It is a new experimental cooling system consisting of a compressor and tiny turbines. With the experimental cryogenic system, NASA hopes to re-cool the infrared detectors to below -315 degrees F (-193 degrees Celsius). NICMOS II was previously tested aboard STS-95 in 1998. It could extend the life of the Hubble Space Telescope by several years. Astronauts aboard Columbia on mission STS-109 will be replacing the original NICMOS with the newer version. Launch of mission STS-109 is scheduled for Feb. 28, 2002

KSC-02pd0037

NASA Image and Video Library

2002-01-22

KENNEDY SPACE CENTER, FLA. -- The NICMOS II radiator is ready for checkout in the Vertical Processing Facility. The Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System is part of the payload on mission STS-109, the Hubble Servicing Telescope mission. NICMOS is a new experimental cooling system consisting of a compressor and tiny turbines. With the experimental cryogenic system, NASA hopes to re-cool the infrared detectors to below -315 degrees F (-193 degrees Celsius). NICMOS II was previously tested aboard STS-95 in 1998. NICMOS could extend the life of the Hubble Space Telescope by several years. Astronauts aboard Columbia on mission STS-109 will be replacing the original NICMOS with the newer version. Launch of Columbia is scheduled Feb. 28, 2002

KSC-02pd0029

NASA Image and Video Library

2002-01-17

KENNEDY SPACE CENTER, FLA. -- Workers in the Vertical Processing Facility test the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System, part of the payload on mission STS-109, the Hubble Servicing Telescope Mission. The worker at right is using a black light. NICMOS II is a new experimental cooling system consisting of a compressor and tiny turbines. With the experimental cryogenic system, NASA hopes to re-cool the infrared detectors to below -315 degrees F (-193 degrees Celsius). NICMOS II was previously tested aboard STS-95 in 1998. It could extend the life of the Hubble Space Telescope by several years. Astronauts aboard Columbia on mission STS-109 will be replacing the original NICMOS with the newer version. Launch of mission STS-109 is scheduled for Feb. 28, 2002

KSC-02pd0025

NASA Image and Video Library

2002-01-17

KENNEDY SPACE CENTER, FLA. -- Workers in the Vertical Processing Facility wheel a container with the NICMOS II across the floor. The Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System is part of the payload on mission STS-109, the Hubble Servicing Telescope Mission. NICMOS is a new experimental cooling system consisting of a compressor and tiny turbines. With the experimental cryogenic system, NASA hopes to re-cool the infrared detectors to below -315 degrees F (-193 degrees Celsius). NICMOS II was previously tested aboard STS-95 in 1998. It could extend the life of the Hubble Space Telescope by several years. Astronauts aboard Columbia on mission STS-109 will be replacing the original NICMOS with the newer version. Launch of mission STS-109 is scheduled for Feb. 28, 2002

The people side of MRP (materiel requirements planning).

PubMed

Lunn, T

1994-05-01

A montage of ideas and concepts have been successfully used to train and motivate people to use MRP II systems more effectively. This is important today because many companies are striving to achieve World Class Manufacturing status. Closed loop Materiel Requirements Planning (MRP) systems are an integral part of the process of continuous improvement. Successfully using a formal management planning system, such as MRP II, is a fundamental stepping stone on the path toward World Class Excellence. Included in this article are techniques that companies use to reduce lead time, simplify bills of materiel, and improve schedule adherence. These and other steps all depend on the people who use the system. The focus will be on how companies use the MRP tool more effectively.

Ni(II) biosorption by Cassia fistula (Golden Shower) biomass.

PubMed

Hanif, Muhammad Asif; Nadeem, Raziya; Bhatti, Haq Nawaz; Ahmad, Najum Rashid; Ansari, Tariq Mehmood

2007-01-10

Cassia fistula is a fast-growing, medium-sized, deciduous tree which is now widely cultivated worldwide as an ornamental tree for its beautiful showy yellow flowers. Methods are required to reuse fallen leaves, branches, stem bark and pods when they start getting all over lawn. This investigation studies the use of these non-useful parts of C. fistula as naturally occurring biosorbent for the batch removal of Ni(II) in a well stirred system under different experimental conditions. The data showed that the maximum pH (pHmax) for efficient sorption of Ni(II) was 6 at which evaluated biosorbent dosage, biosorbent particle size, initial concentrations of Ni(II) and sorption time were 0.1 g/100 mL, <0.255 mm, up to 200 mg/L and 720 min, respectively. The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The Langmuir isotherm model fitted well to data of Ni(II) biosorption by C. fistula biomass as compared to the model of Freundlich. The kinetic studies showed that the sorption rates could be described better by a second order expression than by a more commonly applied Lagergren equation. The magnitude of the Gibbs free energy values indicates spontaneous nature of the sorption process. The sorption ability of C. fistula biomass for Ni(II) removal tends to be in the order: leaves

Angiotensin Converting Enzyme Regulates Cell Proliferation and Migration

PubMed Central

Carvalho, Clarissa Coelho; Florentino, Rodrigo Machado; França, Andressa; Matias, Eveline; Guimarães, Paola Bianchi; Batista, Carolina; Freire, Valder; Carmona, Adriana Karaoglanovic; Pesquero, João Bosco; de Paula, Ana Maria; Foureaux, Giselle; Leite, Maria de Fatima

2016-01-01

Background The angiotensin-I converting enzyme (ACE) plays a central role in the renin-angiotensin system, acting by converting the hormone angiotensin-I to the active peptide angiotensin-II (Ang-II). More recently, ACE was shown to act as a receptor for Ang-II, and its expression level was demonstrated to be higher in melanoma cells compared to their normal counterparts. However, the function that ACE plays as an Ang-II receptor in melanoma cells has not been defined yet. Aim Therefore, our aim was to examine the role of ACE in tumor cell proliferation and migration. Results We found that upon binding to ACE, Ang-II internalizes with a faster onset compared to the binding of Ang-II to its classical AT1 receptor. We also found that the complex Ang-II/ACE translocates to the nucleus, through a clathrin-mediated process, triggering a transient nuclear Ca2+ signal. In silico studies revealed a possible interaction site between ACE and phospholipase C (PLC), and experimental results in CHO cells, demonstrated that the β3 isoform of PLC is the one involved in the Ca2+ signals induced by Ang-II/ACE interaction. Further studies in melanoma cells (TM-5) showed that Ang-II induced cell proliferation through ACE activation, an event that could be inhibited either by ACE inhibitor (Lisinopril) or by the silencing of ACE. In addition, we found that stimulation of ACE by Ang-II caused the melanoma cells to migrate, at least in part due to decreased vinculin expression, a focal adhesion structural protein. Conclusion ACE activation regulates melanoma cell proliferation and migration. PMID:27992423

DOE Office of Scientific and Technical Information (OSTI.GOV)

United States. Bonneville Power Administration.

In regard to the proposed Tenaska Washington II Generation Project, the goal of the Bonneville Power Administration`s (BPA) Environmental Impact Statement (EIS) public involvement process is to determine the issues to be examined and pertinent analyses to be conducted and to solicit comments on the content and quality of information presented in the Draft Environmental Impact Statement (DEIS). Comments and questions are solicited from the public and government agencies during the scoping process and during the comment period and public hearing on the DEIS, to find out what is of most concern to them. The end product of the publicmore » involvement process is the Comment Report which follows in part of this volume on Public Involvement.« less

Combined mesophilic anaerobic and thermophilic aerobic digestion process for high-strength food wastewater to increase removal efficiency and reduce sludge discharge.

PubMed

Jang, H M; Park, S K; Ha, J H; Park, J M

2014-01-01

In this study, a process that combines the mesophilic anaerobic digestion (MAD) process with thermophilic aerobic digestion (TAD) for high-strength food wastewater (FWW) treatment was developed to examine the removal of organic matter and methane production. All effluent discharged from the MAD process was separated into solid and liquid portions. The liquid part was discarded and the sludge part was passed to the TAD process for further degradation. Then, the digested sludge from the TAD process was recycled back to the MAD unit to achieve low sludge discharge from the combined process. The reactor combination was operated in two phases: during Phase I, 40 d of total hydraulic retention time (HRT) was applied; during Phase II, 20 d was applied. HRT of the TAD process was fixed at 5 d. For a comparison, a control process (single-stage MAD) was operated with the same HRTs of the combined process. Our results indicated that the combined process showed over 90% total solids, volatile solids and chemical oxygen demand removal efficiencies. In addition, the combined process showed a significantly higher methane production rate than that of the control process. Consequently, the experimental data demonstrated that the combined MAD-TAD process was successfully employed for high-strength FWW treatment with highly efficient organic matter reduction and methane production.

Matematicas Para El Primer Ciclo Secundario, Volumen II (Parte 2). Traduccion Preliminar de la Edicion en Ingles Revisada. (Mathematics for Junior High School, Volume II, Part 2. Preliminary Translation of the Revised English Edition).

ERIC Educational Resources Information Center

Anderson, R. D.; And Others

This is part two of a two-part SMSG mathematics text for junior high school students. Key ideas emphasized are structure of arithmetic from an algebraic viewpoint, the real number system as a progressing development, and metric and non-metric relations in geometry. Chapter topics include real numbers, similar triangles, variation, polyhedrons,…

Revised Olweus Bully/Victim Questionnaire: evaluation in visually impaired.

PubMed

Gothwal, Vijaya K; Sumalini, Rebecca; Irfan, Shaik Mohammad; Giridhar, Avula; Bharani, Seelam

2013-08-01

To explore the psychometric properties of the revised Olweus Bully/Victim Questionnaire (OBVQ) in children with visual impairment (VI) using Rasch analysis. One hundred fifty Indian children with VI between 8 and 16 years (mean age, 11.6 years; 69% male; mean acuity in the better eye of 0.80 logMAR [Snellen, 20/126]) were administered the revised OBVQ. The 40-item revised OBVQ was developed to assess victimization (i.e., being bullied) and bullying (bullying others) in normally sighted schoolchildren. Only 16 items are used for Rasch analysis and are divided into two parts: I (victimization, eight items) and II (bullying others, eight items). Separate Rasch analysis was conducted for both parts, and the psychometric properties investigated included behavior of rating scale, extent to which the items measured a single construct (unidimensionality by fit statistics and principal component analysis [PCA] of residuals); ability to discriminate among participants' victimization and bullying behaviors (measurement precision as assessed by person separation reliability [PSR] minimum recommended value, 0.80); and targeting of items to participants' victimization and bullying. Response categories were misused for both parts I and II, which required repair before further analysis. Measurement precision was inadequate for both parts (PSR, 0.64 for part I and 0.19 for part II), indicating poor discriminatory ability. All items fit the Rasch model well in part I, indicating unidimensionality that was further confirmed using PCA of residuals. However, an item misfit in part II that required deletion following which the remaining items fit and PCA of residuals also supported unidimensionality. Targeting was -0.58 logits for part I, indicating that the items were matched well with the participants' victimization. By comparison, targeting was suboptimal for part II (-1.97 logits). In its current state, the revised OBVQ is not a valid psychometric instrument to assess victimization and bullying among children with VI.

AUTOMOTIVE DIESEL MAINTENANCE L. UNIT XII, PART I--MAINTAINING THE FUEL SYSTEM (PART II), CUMMINS DIESEL ENGINE, PART II--UNIT INSTALLATION (ENGINE).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM AND THE PROCEDURES FOR DIESEL ENGINE INSTALLATION. TOPICS ARE FUEL FLOW CHARACTERISTICS, PTG FUEL PUMP, PREPARATION FOR INSTALLATION, AND INSTALLING ENGINE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH…

Literacy and Deaf Students in Taiwan: Issues, Practices and Directions for Future Research--Part II

ERIC Educational Resources Information Center

Liu, Hsiu Tan; Andrews, Jean F.; Liu, Chun Jung

2014-01-01

In Part I, we underscore the issues surrounding young deaf and hard of hearing (DHH) learners of literacy in Taiwan who use sign to support their learning of Chinese literacy. We also described the linguistic features of Chinese writing and the visual codes used by DHH children. In Part II, we describe the reading and writing practices used with…

PICASSO: an end-to-end image simulation tool for space and airborne imaging systems II. Extension to the thermal infrared: equations and methods

NASA Astrophysics Data System (ADS)

Cota, Stephen A.; Lomheim, Terrence S.; Florio, Christopher J.; Harbold, Jeffrey M.; Muto, B. Michael; Schoolar, Richard B.; Wintz, Daniel T.; Keller, Robert A.

2011-10-01

In a previous paper in this series, we described how The Aerospace Corporation's Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) tool may be used to model space and airborne imaging systems operating in the visible to near-infrared (VISNIR). PICASSO is a systems-level tool, representative of a class of such tools used throughout the remote sensing community. It is capable of modeling systems over a wide range of fidelity, anywhere from conceptual design level (where it can serve as an integral part of the systems engineering process) to as-built hardware (where it can serve as part of the verification process). In the present paper, we extend the discussion of PICASSO to the modeling of Thermal Infrared (TIR) remote sensing systems, presenting the equations and methods necessary to modeling in that regime.

Stochastic foundations of undulatory transport phenomena: generalized Poisson-Kac processes—part III extensions and applications to kinetic theory and transport

NASA Astrophysics Data System (ADS)

Giona, Massimiliano; Brasiello, Antonio; Crescitelli, Silvestro

2017-08-01

This third part extends the theory of Generalized Poisson-Kac (GPK) processes to nonlinear stochastic models and to a continuum of states. Nonlinearity is treated in two ways: (i) as a dependence of the parameters (intensity of the stochastic velocity, transition rates) of the stochastic perturbation on the state variable, similarly to the case of nonlinear Langevin equations, and (ii) as the dependence of the stochastic microdynamic equations of motion on the statistical description of the process itself (nonlinear Fokker-Planck-Kac models). Several numerical and physical examples illustrate the theory. Gathering nonlinearity and a continuum of states, GPK theory provides a stochastic derivation of the nonlinear Boltzmann equation, furnishing a positive answer to the Kac’s program in kinetic theory. The transition from stochastic microdynamics to transport theory within the framework of the GPK paradigm is also addressed.

48 CFR 3415.406-3 - Part II-Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Part II-Contract clauses. 3415.406-3 Section 3415.406-3 Federal Acquisition Regulations System DEPARTMENT OF EDUCATION ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Solicitation and...

Matematicas Para El Primer Ciclo Secundario, Volumen II (Parte 1). Traduccion Preliminar de la Edicion en Ingles Revisada. (Mathematics for Junior High School, Volume II, Part 1. Preliminary Translation of the Revised English Edition).

ERIC Educational Resources Information Center

Anderson, R. D.; And Others

This is part one of a two-part SMSG mathematics text for junior high school students. Key ideas emphasized are structure of arithmetic from an algebraic viewpoint, the real number system as a progressing development, and metric and non-metric relations in geometry. Chapter topics include number line and coordinates, equations, scientific notation,…

Part I: Steady States in Two-Species Particle Aggregation. Part II: Sparse Representations for Multiscale PDE

DTIC Science & Technology

2015-03-01

University of California Los Angeles Part I: Steady States in Two-Species Particle Aggregation Part II: Sparse Representations for Multiscale PDE A ...Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a ...penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE MAR 2015

Interactive Cadastral Boundary Delineation from Uav Data

NASA Astrophysics Data System (ADS)

Crommelinck, S.; Höfle, B.; Koeva, M. N.; Yang, M. Y.; Vosselman, G.

2018-05-01

Unmanned aerial vehicles (UAV) are evolving as an alternative tool to acquire land tenure data. UAVs can capture geospatial data at high quality and resolution in a cost-effective, transparent and flexible manner, from which visible land parcel boundaries, i.e., cadastral boundaries are delineable. This delineation is to no extent automated, even though physical objects automatically retrievable through image analysis methods mark a large portion of cadastral boundaries. This study proposes (i) a methodology that automatically extracts and processes candidate cadastral boundary features from UAV data, and (ii) a procedure for a subsequent interactive delineation. Part (i) consists of two state-of-the-art computer vision methods, namely gPb contour detection and SLIC superpixels, as well as a classification part assigning costs to each outline according to local boundary knowledge. Part (ii) allows a user-guided delineation by calculating least-cost paths along previously extracted and weighted lines. The approach is tested on visible road outlines in two UAV datasets from Germany. Results show that all roads can be delineated comprehensively. Compared to manual delineation, the number of clicks per 100 m is reduced by up to 86 %, while obtaining a similar localization quality. The approach shows promising results to reduce the effort of manual delineation that is currently employed for indirect (cadastral) surveying.

Introduction to the AdS/CFT Correspondence

NASA Astrophysics Data System (ADS)

Nąstase, Horaǧiu

2015-09-01

Preface; Introduction; Part I. Background: 1. Elements of quantum field theory and gauge theory; 2. Basics of general relativity. Anti-de Sitter space; 3. Basics of supersymmetry; 4. Basics of supergravity; 5. Kaluza-Klein dimensional reduction; 6. Black holes and p-branes; 7. String theory actions and spectra; 8. Elements of conformal field theory; 9. D-branes; Part II. Basics of AdS/CFT for N = 4 SYM vs AdS5 × S5: 10. The AdS/CFT correspondence: motivation, definition and spectra; 11. Witten prescription and 3-point correlator calculations; 12. Holography in Lorentzian signature: Poincaré and global; 13. Solitonic objects in AdS/CFT; 14. Quarks and the Wilson loop; 15. Finite temperature and N = 4 SYM plasmas; 16. Scattering processes and gravitational shockwave limit; 17. The pp-wave correspondence; 18. Spin chains; Part III. AdS/CFT Developments and Gauge-Gravity Dualities: 19. Other conformal cases; 20. The 3 dimensional ABJM model vs. AdS4 × CP3; 21. Gravity duals; 22. Holographic renormalization; 23. RG flow between fixed points; 24. Phenomenological gauge-gravity duality I: AdS/QCD; 25. Phenomenological gauge-gravity duality II: AdS/CMT; 26. Gluon scattering: the Alday-Maldacena prescription; 27. Holographic entanglement entropy: the Ryu-Takayanagi prescription.

STAT3 balances myocyte hypertrophy vis-à-vis autophagy in response to Angiotensin II by modulating the AMPKα/mTOR axis.

PubMed

Chen, Lei; Zhao, Lin; Samanta, Anweshan; Mahmoudi, Seyed Morteza; Buehler, Tanner; Cantilena, Amy; Vincent, Robert J; Girgis, Magdy; Breeden, Joshua; Asante, Samuel; Xuan, Yu-Ting; Dawn, Buddhadeb

2017-01-01

Signal transducers and activators of transcription 3 (STAT3) is known to participate in various cardiovascular signal transduction pathways, including those responsible for cardiac hypertrophy and cytoprotection. However, the role of STAT3 signaling in cardiomyocyte autophagy remains unclear. We tested the hypothesis that Angiotensin II (Ang II)-induced cardiomyocyte hypertrophy is effected, at least in part, through STAT3-mediated inhibition of cellular autophagy. In H9c2 cells, Ang II treatment resulted in STAT3 activation and cellular hypertrophy in a dose-dependent manner. Ang II enhanced autophagy, albeit without impacting AMPKα/mTOR signaling or cellular ADP/ATP ratio. Pharmacologic inhibition of STAT3 with WP1066 suppressed Ang II-induced myocyte hypertrophy and mRNA expression of hypertrophy-related genes ANP and β-MHC. These molecular events were recapitulated in cells with STAT3 knockdown. Genetic or pharmacologic inhibition of STAT3 significantly increased myocyte ADP/ATP ratio and enhanced autophagy through AMPKα/mTOR signaling. Pharmacologic activation and inhibition of AMPKα attenuated and exaggerated, respectively, the effects of Ang II on ANP and β-MHC gene expression, while concomitant inhibition of STAT3 accentuated the inhibition of hypertrophy. Together, these data indicate that novel nongenomic effects of STAT3 influence myocyte energy status and modulate AMPKα/mTOR signaling and autophagy to balance the transcriptional hypertrophic response to Ang II stimulation. These findings may have significant relevance for various cardiovascular pathological processes mediated by Ang II signaling.

Schwertmannite stability in anoxic Fe(II)-rich aqueous solution

NASA Astrophysics Data System (ADS)

Paikaray, Susanta; Schröder, Christian; Peiffer, Stefan

2017-11-01

Schwertmannite (SHM) is a powerful scavenger for As(III) leading to As(III)-enriched precipitates around acid mine drainage environments that may become exposed to aqueous Fe(II). In this study we have investigated the stability of pure SHM and SHM containing 0.92 wt% As(III) under Fe(II)aq-rich (0.4-1.0 mM) anoxic conditions using XRD, SEM, Mössbauer and FTIR spectroscopic techniques. Schwertmannite transformation proceeded through an alkalinity-driven pathway releasing sulfate and a Fe(II)-catalyzed pathway that generated lepidocrocite and goethite at pH 6 and 6.9 in the presence of 1 mM Fe(II)aq. Lepidocrocite was found to be needle shaped if the SHM contained As(III) and platy for pure SHM. Goethite had a poor degree of crystallinity in As(III) containing SHM. Pre-adsorption of As(III) inhibited the extent of SHM transformation. Fe(II) sorption onto SHM was pH dependent and reflected a sorption edge with complete consumption at pH 6.9, while only ∼20% were adsorbed at pH 5. Surface coverage with Fe(II) appears to be the key parameter controlling extent and products of the transformation process. As(III) concentrations in solution are controlled by two mechanisms: (1) exchange of As(III) for sulfate upon alkalinity-driven transformation of schwertmannite and (2) re-adsorption to new phases formed upon Fe(II)-catalyzed transformation. The adsorbed As(III) has inhibited the extent of transformation and was partly released with the maximum release at pH 5 (0.5%) in the absence of Fe(II)aq.

STAT3 balances myocyte hypertrophy vis-à-vis autophagy in response to Angiotensin II by modulating the AMPKα/mTOR axis

PubMed Central

Samanta, Anweshan; Mahmoudi, Seyed Morteza; Buehler, Tanner; Cantilena, Amy; Vincent, Robert J.; Girgis, Magdy; Breeden, Joshua; Asante, Samuel; Xuan, Yu-Ting

2017-01-01

Signal transducers and activators of transcription 3 (STAT3) is known to participate in various cardiovascular signal transduction pathways, including those responsible for cardiac hypertrophy and cytoprotection. However, the role of STAT3 signaling in cardiomyocyte autophagy remains unclear. We tested the hypothesis that Angiotensin II (Ang II)-induced cardiomyocyte hypertrophy is effected, at least in part, through STAT3-mediated inhibition of cellular autophagy. In H9c2 cells, Ang II treatment resulted in STAT3 activation and cellular hypertrophy in a dose-dependent manner. Ang II enhanced autophagy, albeit without impacting AMPKα/mTOR signaling or cellular ADP/ATP ratio. Pharmacologic inhibition of STAT3 with WP1066 suppressed Ang II-induced myocyte hypertrophy and mRNA expression of hypertrophy-related genes ANP and β-MHC. These molecular events were recapitulated in cells with STAT3 knockdown. Genetic or pharmacologic inhibition of STAT3 significantly increased myocyte ADP/ATP ratio and enhanced autophagy through AMPKα/mTOR signaling. Pharmacologic activation and inhibition of AMPKα attenuated and exaggerated, respectively, the effects of Ang II on ANP and β-MHC gene expression, while concomitant inhibition of STAT3 accentuated the inhibition of hypertrophy. Together, these data indicate that novel nongenomic effects of STAT3 influence myocyte energy status and modulate AMPKα/mTOR signaling and autophagy to balance the transcriptional hypertrophic response to Ang II stimulation. These findings may have significant relevance for various cardiovascular pathological processes mediated by Ang II signaling. PMID:28686615

U.S. Geological Survey Trace Elements and related reports through 1954

USGS Publications Warehouse

Smith, Harriet G. Brown; Blatcher, Virginia K.

1955-01-01

This report supersedes TEI-400, "U.S. Geological Survey Trace Elements and related reports through 1953." Part I is a numerical list of U.S. Geological Survey Trace Elements Investigations and Memorandum reports. This part lists not only reports (followed by a date) that have been transmitted to the U.S> Atomic Energy Commission, but also reports in preparation (followed by an asterisk) for which tentative titles were available on December 31, 1954. If a report, or portion of a report, has been published, the fact is indicated by the abbreviation of the medium of publication. (See also Part II.) Part II is a reference guide to Trace Elements and related reports that are available to the public (this part supersedes Part I of Bulletin 1019-B). These reports are grouped according to the type of publication or release. If a report, or portion of the report, has been published in more than one form, appropriate cross-references are given to indicate the other forms of publication. Abstracts published in Nuclear Science Abstracts are not included in Part II; however, if the abstract of a Trace Elements report has been published in NSA, the fact is indicated in Part I. Publications in process on December 31, 1954, are designated by an asterisk. Part III is a finding list of states, areas, and subjects and supersedes Part II of Bulletin 1019-B. It is based on information derived mostly from the titles of reports and, where titles are of general nature, from a cursory review of the reports. This list is not a complete index of the information given in Trace Elements and related reports, but is designed to find subjects of major interest, Because of the numerous entries for Colorado and Utah, information has been listed by counties and, where possible, by subject under these states. Other states have county listings only if a county is included in the title of a report; otherwise, area may be listed separately under the state. Major subjects are listed separately in the index and also, where appropriate under states. Analytical methods and subjects related to analytical research are listed under Analytical Methods and Research, but not separately throughout the index. Most mineralogic studies are included under the heading Mineralogy, but are not necessarily listed according to location. Part IV is an author index. The words “with” and “and” are used to indicate seniority of authorship. For example, a listing of Smith and Brown indicated that Smith is the senior author. A listing of Smith with Brown indicates that Brown is the senior author. In both parts III and IV all Trace Elements reports are listed, as well as other related reports that have not been issued as Trace Elements reports. The following abbreviations have been used: TEI, Trace Elements Investigations report; TEM, Trace Elements Memorandum report; OF, open file; TIS, Technical Information Service release; C, Circular; B, Bulletin; P, Professional Paper; MC, Maps and Charts; J, Journal; and NSA, Nuclear Science Abstracts.

McKenzie River Subbasin Assessment, Technical Report 2000.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alsea Geospatial, Inc.

2000-02-01

This document details the findings of the McKenzie River Subbasin Assessment team. The goal of the subbasin assessment is to provide an ecological assessment of the McKenzie River Floodplain, identification of conservation and restoration opportunities, and discussion of the influence of some upstream actions and processes. This Technical Report can be viewed in conjunction with the McKenzie River Subbasin Summary or as a stand-alone document. The purpose of the technical report is to detail the methodology and findings of the consulting team that the observations and recommendations in the summary document are based on. This part, Part I, provides anmore » introduction to the subbasin and a general overview. Part II details the specific findings of the science team. Part III provides an explanation and examples of how to use the data that has been developed through this assessment to aid in prioritizing restoration activities. Part III also includes the literature cited and appendices.« less

Redox process catalysed by growing crystal-strengite, FePO4,2H2O, crystallizing from solution with iron(II) and hydroxylamine

NASA Astrophysics Data System (ADS)

Lundager Madsen, Hans Erik

2014-09-01

In an attempt to grow pure crystals of the iron(II) phosphate vivianite, Fe3(PO4)2,8H2O, from a solution of Mohr's salt, Fe(NH4)2(SO4)2,6H2O, added to a solution of ammonium phosphate, hydroxylammonium chloride, NH3OHCl, was added to the iron(II) stock solution to eliminate oxidation of iron(II) by oxygen from the air. However, the effect turned out to be the opposite of the expected: whereas hydroxylamine reduces iron(III) in bulk solution, it acted as a strong oxidant in the presence of growing iron phosphate crystals, causing the crystallization of the iron(III) phosphate strengite, FePO4,2H2O, as the only solid phase. Evidently the crystal surface catalyses oxidation of iron(II) by hydroxylamine. The usual composite kinetics of spiral growth and surface nucleation was found. The surface-nucleation part yielded edge free energy λ in the range 12-45 pJ/m, virtually independent of temperature and in the range typical for phosphates of divalent metals. The scatter of values for λ presumably arises from contributions from different crystal forms to the overall growth rate. The low mean value points to strong adsorption of iron(II), which is subsequently oxidized at the crystal surface, forming strengite. The state of the system did not tend to thermodynamic equilibrium, but to a metastable state, presumably controlled by the iron(II) rich surface layer of the crystal. In addition to crystal growth, it was possible to measure nucleation kinetics by light scattering (turbidimetry). A point of transition from heterogeneous to homogeneous nucleation was found, and from the results for the homogeneous domain a rather precise value of crystal surface free energy γ=55 mJ/m2 was found. This is a relatively low value as well, indicating that the redox process plays a role already at the nucleation stage.

Academic Earmarks--Parts I & II. Hearings before the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Third Congress, First Session (June 16; September 15, 1993).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

These hearings examined testimony on the practice of academic earmarking by the U.S. Congress, the process of allocating federal funds to academic projects or institutions based upon the influence of one or more members of Congress who favor the funding, rather than on the specific merits of the project or institution. Oral and written testimony…

Transplantation of Cadaver Tissues and Organs. Part 15. Chapter 338

DTIC Science & Technology

1984-01-09

different individuals should preferentially be nonviable and cleansed * •of cellular debris. * N moral and legal issues most often surround the...there is a minority who view such a position as immoral,that the individual expires only when all vegetative function ceases. 3 i Ii i ŕ " Donald J...Drug Adminstration in 1982 has ruled processed bone * as a "device", which qualifies under the Federal Food, Drug and Cosmetic Act, Medical Device

KSC00vafbdig003

NASA Image and Video Library

2000-06-27

A crated National Oceanic and Atmospheric Administration (NOAA-L) satellite is moved inside the B16-10 spacecraft processing hangar at Vandenberg Air Force Base, Calif. NOAA-L is part of the Polar-Orbiting Operational Environmental Satellite (POES) program that provides atmospheric measurements of temperature, humidity, ozone and cloud images, tracking weather patterns that affect the global weather and climate. The launch of the NOAA-L satellite is scheduled no earlier than Sept. 12 aboard a Lockheed Martin Titan II rocket

KSC00vafbdig004

NASA Image and Video Library

2000-06-27

Inside the B16-10 spacecraft processing hangar at Vandenberg Air Force Base, Calif., workers oversee the uncrating of the National Oceanic and Atmospheric Administration (NOAA-L) satellite. NOAA-L is part of the Polar-Orbiting Operational Environmental Satellite (POES) program that provides atmospheric measurements of temperature, humidity, ozone and cloud images, tracking weather patterns that affect the global weather and climate. The launch of the NOAA-L satellite is scheduled no earlier than Sept. 12 aboard a Lockheed Martin Titan II rocket

JPRS Report, Soviet Union, Political Affairs, Preparations for the 19th Party Conference, Part II.

DTIC Science & Technology

1988-10-30

aspects of society’s life have been laid. The goal of restructuring is to reveal fully the humanist nature and creative might of socialism. The...restructuring. At the same time, the process of restructuring is proceed- ing in a contradictory fashion , via the overcoming of difficulties and a...1988 CENTRAL COMMITTEE THESES The first encouraging results have appeared in the cre- ation of examples of modern equipment and technology . The

Expression of vesicular glutamate transporters, VGluT1 and VGluT2, in axon terminals of nociceptive primary afferent fibers in the superficial layers of the medullary and spinal dorsal horns of the rat.

PubMed

Li, Jin-Lian; Fujiyama, Fumino; Kaneko, Takeshi; Mizuno, Noboru

2003-03-10

We examined immunohistochemically whether the vesicular glutamate transporters (VGluTs), VGluT1 and VGluT2, might be expressed in synaptic terminals of nociceptive primary afferent fibers within laminae I and II of the medullary and spinal dorsal horns of the rat. VGluT1 immunoreactivity (IR) was intense in the inner part of lamina II but weak in lamina I and the outer part of lamina II. VGluT2-IR was most intense in lamina I and the outer part of lamina II. Expression of VGluTs in synaptic terminals was confirmed by dual immunofluorescence histochemistry for VGluTs and synaptophysin. Expression of VGluTs in axon terminals of primary afferent fibers terminating in laminae I and II was also confirmed immunohistochemically after unilateral dorsal rhizotomy. The dual immunofluorescence histochemistry indicated expression of VGluTs in substance P (SP)-containing axon terminals in lamina I and the outer part of lamina II. Electron microscopy confirmed the coexpression of VGluTs and SP in axon terminals within laminae I and II; VGluTs was associated with round synaptic vesicles at the asymmetric synapses. It was further observed that isolectin IB4, a marker for unmyelinated axons, often bound with VGluT2-immunopositive structures but rarely with VGluT1-immunopositive structures in lamina II. Thus, the results indicated in laminae I and II of the medullary and spinal dorsal horns that both VGluT1 and VGluT2 were expressed in axon terminals of primary afferent fibers, including SP-containing nociceptive fibers and that VGluT in unmyelinated primary afferent fibers terminating in lamina II was primarily VGluT2. Copyright 2003 Wiley-Liss, Inc.

Nursing Care of Patients Undergoing Chemotherapy Desensitization: Part I.

PubMed

Jakel, Patricia; Carsten, Cynthia; Braskett, Melinda; Carino, Arvie

2016-02-01

Hypersensitivity reactions to chemotherapeutic agents can cause the discontinuation of first-line therapies. Chemotherapy desensitization is a safe, but labor-intensive, process to administer these important medications. A desensitization protocol can enable a patient to receive the entire target dose of a medication, even if the patient has a history of severe infusion reactions. In this article, the authors explain the pathophysiology of hypersensitivity reactions and describe the recent development of desensitization protocols in oncology. In part II of this article, which will appear in the April 2016 issue of the Clinical Journal of Oncology Nursing, the authors will give a detailed account of how a desensitization protocol is performed at an academic medical center.
.

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit G: Resources for Managerial Assistance. Research and Development Series No. 194 B-7.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing business. Unit G focuses on obtaining managerial…

Innovative Culture, Part 2: Virtual Consultancies - Engaging Talent

DTIC Science & Technology

2016-01-21

Innovative Culture, Part II: Virtual Consultancies – Engaging Talent January 21, 2016 These are the final briefing slides as approved by...Engaging Talent (Innovative Culture, Part II) – Aims to facilitate and capitalize on the vast capacity for internal consultancy within the DoD...for talent with an industry model that values – and makes effective use of – young, fresh, innovative voices  With a huge uniformed workforce

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit A: Developing the Business Plan. Research and Development Series No. 194 B-1.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit A focuses on developing a business…

Criticality safety strategy and analysis summary for the fuel cycle facility electrorefiner at Argonne National Laboratory West

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariani, R.D.; Benedict, R.W.; Lell, R.M.

1996-05-01

As part of the termination activities of Experimental Breeder Reactor II (EBR-II) at Argonne National Laboratory (ANL) West, the spent metallic fuel from EBR-II will be treated in the fuel cycle facility (FCF). A key component of the spent-fuel treatment process in the FCF is the electrorefiner (ER) in which the actinide metals are separated from the active metal fission products and the reactive bond sodium. In the electrorefining process, the metal fuel is anodically dissolved into a high-temperature molten salt, and refined uranium or uranium/plutonium products are deposited at cathodes. The criticality safety strategy and analysis for the ANLmore » West FCF ER is summarized. The FCF ER operations and processes formed the basis for evaluating criticality safety and control during actinide metal fuel refining. To show criticality safety for the FCF ER, the reference operating conditions for the ER had to be defined. Normal operating envelopes (NOEs) were then defined to bracket the important operating conditions. To keep the operating conditions within their NOEs, process controls were identified that can be used to regulate the actinide forms and content within the ER. A series of operational checks were developed for each operation that will verify the extent or success of an operation. The criticality analysis considered the ER operating conditions at their NOE values as the point of departure for credible and incredible failure modes. As a result of the analysis, FCF ER operations were found to be safe with respect to criticality.« less

40 CFR 52.1078 - Extensions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... second generation On-board Diagnostics (OBD-II) equipped motor vehicles as part of its inspection and...-II checks (for 1996-and-newer OBD-II equipped vehicles) as an element of the Commonwealth's I/M...

Student Performance on the NBME Part II Subtest and Subject Examination in Obstetrics-Gynecology.

ERIC Educational Resources Information Center

Metheny, William P.; Holzman, Gerald B.

1988-01-01

Comparison of the scores of 342 third-year medical students on the National Board of Medical Examiners subject examination and the Part II subtest on obstetrics-gynecology found significantly better performance on the former, suggesting a need to interpret the scores differently. (Author/MSE)

Analysis of Vietnamization: Summary and Evaluation

DTIC Science & Technology

1973-11-01

Ellsberg, Daniel . Some Lessons from Failure in Vietnam, P-4036. Santa Monica: The RAND Corp., July 1969. Fulbright, J. William (ed.). The Vietnam...34 Chira and North Vietnam: Two Revolutionary Paths, " Part I, Current Scene, Vol. IX, No. II (Nov 7, 1971), Part II, Current Scene. Vol. IX, No. IZ (Doc 7

26 CFR 1.856-2 - Limitations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TAXES Real Estate Investment Trusts § 1.856-2 Limitations. (a) Effective date. The provisions of part II... estate investment trust beginning after December 31, 1960. (b) Election. Under the provisions of section 856(c)(1), a trust, even though it satisfies the other requirements of part II of subchapter M for the...

[Individual Types Reactivity of EEG Oscillations in Effective Heart Rhythm Biofeedback Parameters in Adolescents and Young People in the North].

PubMed

Krivonogova, E V; Poskotinova, L V; Demin, D B

2015-01-01

A single session of heart rate variability (HRV) biofeedback in apparently healthy young people and adolescents aged 14-17 years in order to increase vagal effects on heart rhythm and also electroencephalograms were carried out. Different variants of EEG spectral power during the successful HRV biofeedback session were identified. In the case of I variant of EEG activity the increase of power spectrum of alpha-, betal-, theta-components takes place in all parts of the brain. In the case of II variant of EEG activity the reduction of power spectrum of alpha-, betal-, theta-activity in all parts of the brain was observed. I and II variants of EEG activity cause more intensive regime of cortical-subcortical interactions. During the III variant of EEG activity the successful biofeedback is accompanied by increase of alpha activity in the central, front and anteriofrontal brain parts and so indicates the formation of thalamocortical relations of neural network in order to optimize the vegetal regulation of heart function. There was an increase in alpha- and beta1-activity in the parietal, central, frontal and temporal brain parts during the IV variant of EEG activity and so that it provides the relief of neural networks communication for information processing. As a result of V variance of EEG activity there was the increase of power spectrum of theta activity in the central and frontal parts of both cerebral hemispheres, so it was associated with the cortical-hippocampal interactions to achieve a successful biofeedback.

Medical devices; radiology devices; reclassification of full-field digital mammography system. Final rule.

PubMed

2010-11-05

The Food and Drug Administration (FDA) is announcing the reclassification of the full-field digital mammography (FFDM) system from class III (premarket approval) to class II (special controls). The device type is intended to produce planar digital x-ray images of the entire breast; this generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component parts, and accessories. The special control that will apply to the device is the guidance document entitled "Class II Special Controls Guidance Document: Full-Field Digital Mammography System." FDA is reclassifying the device into class II (special controls) because general controls along with special controls will provide a reasonable assurance of safety and effectiveness of the device. Elsewhere in this issue of the Federal Register, FDA is announcing the availability of the guidance document that will serve as the special control for this device.

Flotation of metal-loaded clay anion exchangers. Part II: the case of arsenates.

PubMed

Lazaridis, N K; Hourzemanoglou, A; Matis, K A

2002-04-01

Hydrotalcite-like materials, or otherwise termed layered double hydroxides, are clays with an ability to remove anions. As they usually are in powder form, these sorbents often present appreciable problems in the solid/liquid separation process following the sorption stage. Sorptive flotation of metal-loaded particles was investigated in this paper, as an alternative two-stage process. In the sorption process, satisfactory removals of arsenic(V) were obtained onto synthetic hydrotalcite particles from water. The effect of some parameters, like the solution ionic strength, concentrations, temperature, etc. was examined. During the second stage of the process, hydrotalcite fine particles were removed from the liquid phase by dispersed-air flotation; various surfactants were tested in relation to the ionic strength of the solution. The combined process of sorptive flotation provides promising results for arsenic removal.

Modeling and development of a superfluid magnetic pump with no moving parts

NASA Astrophysics Data System (ADS)

Jahromi, Amir Eshraghniaye; Miller, Franklin; Nellis, Gregory

2012-06-01

Current state of the art sub Kelvin Superfluid Stirling Refrigerators and Pulse tube Superfluid Refrigerators use multiple bellows pistons to execute the cycle. These types of displacers can be replaced by a newly introduced pump, a Superfluid Magnetic Pump, with no moving parts. Integration of this pump in the Pulse tube Superfluid Refrigeration system will make it a sub Kelvin Stirling refrigeration system free of any moving parts that is suitable for use in space cooling applications. The Superfluid Magnetic Pump consists of a canister that contains Gadolinium Gallium Garnet particles that is surrounded by a superconducting magnetic coil. The driving mechanism of this pump is the fountain effect in He II. A qualitative description of one cycle operation of the Superfluid Magnetic Pump is presented followed by a numerical model for each process of the cycle.

The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Böhringer, Hans; Chon, Gayoung; Trümper, Joachim

As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10{sup −12} erg s{sup −1} cm{sup −2} (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS IImore » cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ {sub 8} and Ω{sub m}, yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.« less

Calpain-10 Activity Underlies Angiotensin II-Induced Aldosterone Production in an Adrenal Glomerulosa Cell Model

PubMed Central

Seremwe, Mutsa; Schnellmann, Rick G.

2015-01-01

Aldosterone is a steroid hormone important in the regulation of blood pressure. Aberrant production of aldosterone results in the development and progression of diseases including hypertension and congestive heart failure; therefore, a complete understanding of aldosterone production is important for developing more effective treatments. Angiotensin II (AngII) regulates steroidogenesis, in part through its ability to increase intracellular calcium levels. Calcium can activate calpains, proteases classified as typical or atypical based on the presence or absence of penta-EF-hands, which are involved in various cellular responses. We hypothesized that calpain, in particular calpain-10, is activated by AngII in adrenal glomerulosa cells and underlies aldosterone production. Our studies showed that pan-calpain inhibitors reduced AngII-induced aldosterone production in 2 adrenal glomerulosa cell models, primary bovine zona glomerulosa and human adrenocortical carcinoma (HAC15) cells, as well as CYP11B2 expression in the HAC15 cells. Although AngII induced calpain activation in these cells, typical calpain inhibitors had no effect on AngII-elicited aldosterone production, suggesting a lack of involvement of classical calpains in this process. However, an inhibitor of the atypical calpain, calpain-10, decreased AngII-induced aldosterone production. Consistent with this result, small interfering RNA (siRNA)-mediated knockdown of calpain-10 inhibited aldosterone production and CYP11B2 expression, whereas adenovirus-mediated overexpression of calpain-10 resulted in increased AngII-induced aldosterone production. Our results indicate that AngII-induced activation of calpain-10 in glomerulosa cells underlies aldosterone production and identify calpain-10 or its downstream pathways as potential targets for the development of drug therapies for the treatment of hypertension. PMID:25836666

Recovery in soccer : part ii-recovery strategies.

PubMed

Nédélec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Gregory

2013-01-01

In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue, and then to regain performance faster and reduce the risk of injury. Fatigue following competition is multifactorial and mainly related to dehydration, glycogen depletion, muscle damage and mental fatigue. Recovery strategies should consequently be targeted against the major causes of fatigue. Strategies reviewed in part II of this article were nutritional intake, cold water immersion, sleeping, active recovery, stretching, compression garments, massage and electrical stimulation. Some strategies such as hydration, diet and sleep are effective in their ability to counteract the fatigue mechanisms. Providing milk drinks to players at the end of competition and a meal containing high-glycaemic index carbohydrate and protein within the hour following the match are effective in replenishing substrate stores and optimizing muscle-damage repair. Sleep is an essential part of recovery management. Sleep disturbance after a match is common and can negatively impact on the recovery process. Cold water immersion is effective during acute periods of match congestion in order to regain performance levels faster and repress the acute inflammatory process. Scientific evidence for other strategies reviewed in their ability to accelerate the return to the initial level of performance is still lacking. These include active recovery, stretching, compression garments, massage and electrical stimulation. While this does not mean that these strategies do not aid the recovery process, the protocols implemented up until now do not significantly accelerate the return to initial levels of performance in comparison with a control condition. In conclusion, scientific evidence to support the use of strategies commonly used during recovery is lacking. Additional research is required in this area in order to help practitioners establish an efficient recovery protocol immediately after matchplay, but also for the following days. Future studies could focus on the chronic effects of recovery strategies, on combinations of recovery protocols and on the effects of recovery strategies inducing an anti-inflammatory or a pro-inflammatory response.

Microbial Iron(II) Oxidation in Littoral Freshwater Lake Sediment: The Potential for Competition between Phototrophic vs. Nitrate-Reducing Iron(II)-Oxidizers

PubMed Central

Melton, E. D.; Schmidt, C.; Kappler, A.

2012-01-01

The distribution of neutrophilic microbial iron oxidation is mainly determined by local gradients of oxygen, light, nitrate and ferrous iron. In the anoxic top part of littoral freshwater lake sediment, nitrate-reducing and phototrophic Fe(II)-oxidizers compete for the same e− donor; reduced iron. It is not yet understood how these microbes co-exist in the sediment and what role they play in the Fe cycle. We show that both metabolic types of anaerobic Fe(II)-oxidizing microorganisms are present in the same sediment layer directly beneath the oxic-anoxic sediment interface. The photoferrotrophic most probable number counted 3.4·105 cells·g−1 and the autotrophic and mixotrophic nitrate-reducing Fe(II)-oxidizers totaled 1.8·104 and 4.5·104 cells·g−1 dry weight sediment, respectively. To distinguish between the two microbial Fe(II) oxidation processes and assess their individual contribution to the sedimentary Fe cycle, littoral lake sediment was incubated in microcosm experiments. Nitrate-reducing Fe(II)-oxidizing bacteria exhibited a higher maximum Fe(II) oxidation rate per cell, in both pure cultures and microcosms, than photoferrotrophs. In microcosms, photoferrotrophs instantly started oxidizing Fe(II), whilst nitrate-reducing Fe(II)-oxidizers showed a significant lag-phase during which they probably use organics as e− donor before initiating Fe(II) oxidation. This suggests that they will be outcompeted by phototrophic Fe(II)-oxidizers during optimal light conditions; as phototrophs deplete Fe(II) before nitrate-reducing Fe(II)-oxidizers start Fe(II) oxidation. Thus, the co-existence of the two anaerobic Fe(II)-oxidizers may be possible due to a niche space separation in time by the day-night cycle, where nitrate-reducing Fe(II)-oxidizers oxidize Fe(II) during darkness and phototrophs play a dominant role in Fe(II) oxidation during daylight. Furthermore, metabolic flexibility of Fe(II)-oxidizing microbes may play a paramount role in the conservation of the sedimentary Fe cycle. PMID:22666221

KSC-02pd0032

NASA Image and Video Library

2002-01-17

KENNEDY SPACE CENTER, FLA. -- In the Vertical Processing Facility, workers help guide the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System into an protective enclosure on a payload carrier. NICMOS II is part of the payload on mission STS-109, the Hubble Servicing Telescope Mission. It is a new experimental cooling system consisting of a compressor and tiny turbines. With the experimental cryogenic system, NASA hopes to re-cool the infrared detectors to below -315 degrees F (-193 degrees Celsius). NICMOS II was previously tested aboard STS-95 in 1998. It could extend the life of the Hubble Space Telescope by several years. Astronauts aboard Columbia on mission STS-109 will be replacing the original NICMOS with the newer version. Launch of mission STS-109 is scheduled for Feb. 28, 2002

Art Therapy and Cognitive Processing Therapy for Combat-Related PTSD: A Randomized Controlled Trial

PubMed Central

Campbell, Melissa; Decker, Kathleen P.; Kruk, Kerry; Deaver, Sarah P.

2018-01-01

This randomized controlled trial was designed to determine if art therapy in conjunction with Cognitive Processing Therapy (CPT) was more effective for reducing symptoms of combat posttraumatic stress disorder (PTSD) than CPT alone. Veterans (N = 11) were randomized to receive either individual CPT, or individual CPT in conjunction with individual art therapy. PTSD Checklist–Military Version and Beck Depression Inventory–II scores improved with treatment in both groups with no significant difference in improvement between the experimental and control groups. Art therapy in conjunction with CPT was found to improve trauma processing and veterans considered it to be an important part of their treatment as it provided healthy distancing, enhanced trauma recall, and increased access to emotions. PMID:29332989

Airflow analyses using thermal imaging in Arizona's Meteor Crater as part of METCRAX II

NASA Astrophysics Data System (ADS)

Grudzielanek, A. Martina; Vogt, Roland; Cermak, Jan; Maric, Mateja; Feigenwinter, Iris; Whiteman, C. David; Lehner, Manuela; Hoch, Sebastian W.; Krauß, Matthias G.; Bernhofer, Christian; Pitacco, Andrea

2016-04-01

In October 2013 the second Meteor Crater Experiment (METCRAX II) took place at the Barringer Meteorite Crater (aka Meteor Crater) in north central Arizona, USA. Downslope-windstorm-type flows (DWF), the main research objective of METCRAX II, were measured by a comprehensive set of meteorological sensors deployed in and around the crater. During two weeks of METCRAX II five infrared (IR) time lapse cameras (VarioCAM® hr research & VarioCAM® High Definition, InfraTec) were installed at various locations on the crater rim to record high-resolution images of the surface temperatures within the crater from different viewpoints. Changes of surface temperature are indicative of air temperature changes induced by flow dynamics inside the crater, including the DWF. By correlating thermal IR surface temperature data with meteorological sensor data during intensive observational periods the applicability of the IR method of representing flow dynamics can be assessed. We present evaluation results and draw conclusions relative to the application of this method for observing air flow dynamics in the crater. In addition we show the potential of the IR method for METCRAX II in 1) visualizing airflow processes to improve understanding of these flows, and 2) analyzing cold-air flows and cold-air pooling.

The Evaluation of High Temperature Adhesive Bonding Processes for Rocket Engine Combustion Chamber Applications

NASA Technical Reports Server (NTRS)

McCray, Daniel; Smith, Jeffrey; Rice, Brian; Blohowiak, Kay; Anderson, Robert; Shin, E. Eugene; McCorkle, Linda; Sutter, James

2003-01-01

NASA Glenn Research Center is currently evaluating the possibility of using high- temperature polymer matrix composites to reinforce the combustion chamber of a rocket engine. One potential design utilizes a honeycomb structure composed of a PMR-II- 50/M40J 4HS composite facesheet and titanium honeycomb core to reinforce a stainless steel shell. In order to properly fabricate this structure, adhesive bond PMR-II-50 composite. Proper prebond surface preparation is critical in order to obtain an acceptable adhesive bond. Improperly treated surfaces will exhibit decreased bond strength and durability, especially in metallic bonds where interface are susceptible to degradation due to heat and moisture. Most treatments for titanium and stainless steel alloys require the use of strong chemicals to etch and clean the surface. This processes are difficult to perform due to limited processing facilities as well as safety and environmental risks and they do not consistently yield optimum bond durability. Boeing Phantom Works previously developed sol-gel surface preparations for titanium alloys using a PETI-5 based polyimide adhesive. In support of part of NASA Glenn Research Center, UDRI and Boeing Phantom Works evaluated variations of this high temperature sol-gel surface preparation, primer type, and primer cure conditions on the adhesion performance of titanium and stainless steel using Cytec FM 680-1 polyimide adhesive. It was also found that a modified cure cycle of the FM 680-1 adhesive, i.e., 4 hrs at 370 F in vacuum + post cure, significantly increased the adhesion strength compared to the manufacturer's suggested cure cycle. In addition, the surface preparation of the PMR-II-50 composite was evaluated in terms of surface cleanness and roughness. This presentation will discuss the results of strength and durability testing conducted on titanium, stainless steel, and PMR-II-50 composite adherends to evaluate possible bonding processes.

Department of Defense Index of Specifications and Standards. Part 1. Alphabetical Listing

DTIC Science & Technology

1989-07-01

the Basic DODISS Part II. PART II, Numerical Listing reflects all active documents in document number sequence within document type. The alphabetic...NPFC 106) 5801 Tabor Avenue P ’ - elphia, PA 19120 "The use Index is mandatory on all military activities . This mandatory provision i as thiat the...Class, is also available as follows: Military Activities : Commanding Officer Naval Publications and Forms Center (ATTN: NPODS) 5801 Tabor Avenue

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit E: Choosing the Type of Ownership. Research and Development Series No. 194 B-5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit E focuses on the three major types of…

Bases of Classification of Geometric Concepts Used by Children of Varying Characteristics. Report from the Project on Situational Variables and Efficiency of Concept Learning. Part II.

ERIC Educational Resources Information Center

Wiviott, Suzanne Pasch

This document, Part II of a two-part study, is the summary chapter of a report which sought to ascertain the relationship of grade level, achievement level, sex, and method of presentation to the various bases by which children classify geometric concepts. Two tasks, administered consecutively to 96 subjects in grades five, eight, and eleven,…

Starting a hospital-based home health agency: Part II--Key success factors.

PubMed

Montgomery, P

1993-09-01

In Part II of a three-part series, the financial, technological and legislative issues of a hospital-based home health-agency are discussed. Beginning a home healthcare service requires intensive research to answer key environmental and operational questions--need, competition, financial projections, initial start-up costs and the impact of delayed depreciation. Assessments involving technology, staffing, legislative and regulatory issues can help project service volume, productivity and cost-control.

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit F: How to Finance the Business. Research and Development Series No. 194 B-6.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit F focuses on financing the business. It…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit B: Where to Locate the Business. Research and Development Series No. 194 B-2.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is on establishing a business. Unit B focuses on choosing a business…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit D: Government Regulations and Small Businesses. Research and Development Series No. 194 B-4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit D focuses on business regulations at…

PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit C: Legal Issues and Small Business. Research and Development Series No. 194 B-3.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit C focuses on legal issues that affect…

Neural representation of objects in space: a dual coding account.

PubMed Central

Humphreys, G W

1998-01-01

I present evidence on the nature of object coding in the brain and discuss the implications of this coding for models of visual selective attention. Neuropsychological studies of task-based constraints on: (i) visual neglect; and (ii) reading and counting, reveal the existence of parallel forms of spatial representation for objects: within-object representations, where elements are coded as parts of objects, and between-object representations, where elements are coded as independent objects. Aside from these spatial codes for objects, however, the coding of visual space is limited. We are extremely poor at remembering small spatial displacements across eye movements, indicating (at best) impoverished coding of spatial position per se. Also, effects of element separation on spatial extinction can be eliminated by filling the space with an occluding object, indicating that spatial effects on visual selection are moderated by object coding. Overall, there are separate limits on visual processing reflecting: (i) the competition to code parts within objects; (ii) the small number of independent objects that can be coded in parallel; and (iii) task-based selection of whether within- or between-object codes determine behaviour. Between-object coding may be linked to the dorsal visual system while parallel coding of parts within objects takes place in the ventral system, although there may additionally be some dorsal involvement either when attention must be shifted within objects or when explicit spatial coding of parts is necessary for object identification. PMID:9770227

High-energy emissions from the gamma-ray binary LS 5039

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takata, J.; Leung, Gene C. K.; Cheng, K. S.

2014-07-20

We study mechanisms of multi-wavelength emissions (X-ray, GeV, and TeV gamma-rays) from the gamma-ray binary LS 5039. This paper is composed of two parts. In the first part, we report on results of observational analysis using 4 yr data of the Fermi Large Area Telescope. Due to the improvement of instrumental response function and increase of the statistics, the observational uncertainties of the spectrum in the ∼100-300 MeV bands and >10 GeV bands are significantly improved. The present data analysis suggests that the 0.1-100 GeV emissions from LS 5039 contain three different components: (1) the first component contributes to <1more » GeV emissions around superior conjunction, (2) the second component dominates in the 1-10 GeV energy bands, and (3) the third component is compatible with the lower-energy tail of the TeV emissions. In the second part, we develop an emission model to explain the properties of the phase-resolved emissions in multi-wavelength observations. Assuming that LS 5039 includes a pulsar, we argue that emissions from both the magnetospheric outer gap and the inverse-Compton scattering process of cold-relativistic pulsar wind contribute to the observed GeV emissions. We assume that the pulsar is wrapped by two kinds of termination shock: Shock-I due to the interaction between the pulsar wind and the stellar wind and Shock-II due to the effect of the orbital motion. We propose that the X-rays are produced by the synchrotron radiation at the Shock-I region and the TeV gamma-rays are produced by the inverse-Compton scattering process at the Shock-II region.« less

Proglucagons in vertebrates: Expression and processing of multiple genes in a bony fish.

PubMed

Busby, Ellen R; Mommsen, Thomas P

2016-09-01

In contrast to mammals, where a single proglucagon (PG) gene encodes three peptides: glucagon, glucagon-like peptide 1 and glucagon-like peptide 2 (GLP-1; GLP-2), many non-mammalian vertebrates carry multiple PG genes. Here, we investigate proglucagon mRNA sequences, their tissue expression and processing in a diploid bony fish. Copper rockfish (Sebastes caurinus) express two independent genes coding for distinct proglucagon sequences (PG I, PG II), with PG II lacking the GLP-2 sequence. These genes are differentially transcribed in the endocrine pancreas, the brain, and the gastrointestinal tract. Alternative splicing identified in rockfish is only one part of this complex regulation of the PG transcripts: the system has the potential to produce two glucagons, four GLP-1s and a single GLP-2, or any combination of these peptides. Mass spectrometric analysis of partially purified PG-derived peptides in endocrine pancreas confirms translation of both PG transcripts and differential processing of the resulting peptides. The complex differential regulation of the two PG genes and their continued presence in this extant teleostean fish strongly suggests unique and, as yet largely unidentified, roles for the peptide products encoded in each gene. Copyright © 2016 Elsevier Inc. All rights reserved.

The expression and function of cathepsin E in dendritic cells.

PubMed

Chain, Benjamin M; Free, Paul; Medd, Patrick; Swetman, Claire; Tabor, Alethea B; Terrazzini, Nadia

2005-02-15

Cathepsin E is an aspartic proteinase that has been implicated in Ag processing within the class II MHC pathway. In this study, we document the presence of cathepsin E message and protein in human myeloid dendritic cells, the preeminent APCs of the immune system. Cathepsin E is found in a perinuclear compartment, which is likely to form part of the endoplasmic reticulum, and also a peripheral compartment just beneath the cell membrane, with a similar distribution to that of Texas Red-dextran within 2 min of endocytosis. To investigate the function of cathepsin E in processing, a new soluble targeted inhibitor was synthesized by linking the microbial aspartic proteinase inhibitor pepstatin to mannosylated BSA via a cleavable disulfide linker. This inhibitor was shown to block cathepsin D/E activity in cell-free assays and within dendritic cells. The inhibitor blocked the ability of dendritic cells from wild-type as well as cathepsin D-deficient mice to present intact OVA, but not an OVA-derived peptide, to cognate T cells. The data therefore support the hypothesis that cathepsin E has an important nonredundant role in the class II MHC Ag processing pathway within dendritic cells.

The Naval Postgraduate School SECURE ARCHIVAL STORAGE SYSTEM. Part II. Segment and Process Management Implementation.

DTIC Science & Technology

1981-03-01

Research Instructor of Computer Scienr-. Reviewed by: Released by: WILLIAM M. TOLLES Department puter Science Dean of Research 4c t SECURITY...Lyle A. Cox, Roger R. Schell, and Sonja L. Perdue 9. PERFORMING ORGANIZATION NAME ANO ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA A WORK UNIT... Computer Networks, Operating Systems, Computer Security 20. AftUrCT (Cnthm, w v re eae old* It n..*p and idm 0 F W blk ..m.m.o’) ",A_;he security

Military Doctrine, and Maxims of Napoleon, A Bibliography of Periodical Articles.

DTIC Science & Technology

1984-10-01

0041-770X. ....- S. . ..... -79 PART II - DOCTRINE -1. USA ANDERSON, NORMAN J. "A Statement of Doctrine," NCG, 47:10. November 1963. "Army 86...Process," MILRVW, 64:46-57, January 1984. KRAUSE, MICHAEL D..~ - "Arthur L. Wagner : Doctrine and Lessons from the Past," MILRVW, 58:53-9, November...June 1927. b. Democratic Republic of Germany (DDR). BELL, RAYMOND E. "Armor Development in the Weimar Republic," MILRVW, 47:12-7, March 1967. c

A Bee Guide to Complying with the Safe Drinking Water Act

DTIC Science & Technology

1991-08-01

disinfectants commonly used in water treatment. These disinfectants include chlorine, chloramine , chlorine dioxide, and ozone. Existing toxicological...to water systems that add a disinfectant (oxidant, such as chlorine, chlorine dioxide, chloramines or ozone) to any part of the treatment process. 6...AL-TR-1 991-0075 AD-A242 509 ^tLECTE II AR M A BEE GUIDE TO COMPLYING WITH THE S SAFE DRINKING WATER ACT T R Q John G. Garland III, Major, USAF, BSCN

NOAA-L satellite arrives at Vandenberg AFB

NASA Technical Reports Server (NTRS)

2000-01-01

A crated National Oceanic and Atmospheric Administration (NOAA-L) satellite is moved inside the B16-10 spacecraft processing hangar at Vandenberg Air Force Base, Calif. NOAA-L is part of the Polar- Orbiting Operational Environmental Satellite (POES) program that provides atmospheric measurements of temperature, humidity, ozone and cloud images, tracking weather patterns that affect the global weather and climate. The launch of the NOAA-L satellite is scheduled no earlier than Sept. 12 aboard a Lockheed Martin Titan II rocket. NOAA-L satellite arrives at Vandenberg AFB

NASA Technical Reports Server (NTRS)

2000-01-01

Inside the B16-10 spacecraft processing hangar at Vandenberg Air Force Base, Calif., workers oversee the uncrating of the National Oceanic and Atmospheric Administration (NOAA-L) satellite. NOAA-L is part of the Polar-Orbiting Operational Environmental Satellite (POES) program that provides atmospheric measurements of temperature, humidity, ozone and cloud images, tracking weather patterns that affect the global weather and climate. The launch of the NOAA-L satellite is scheduled no earlier than Sept. 12 aboard a Lockheed Martin Titan II rocket. «