Analysing growth and development of plants jointly using developmental growth stages

PubMed Central

Dambreville, Anaëlle; Lauri, Pierre-Éric; Normand, Frédéric; Guédon, Yann

2015-01-01

Background and Aims Plant growth, the increase of organ dimensions over time, and development, the change in plant structure, are often studied as two separate processes. However, there is structural and functional evidence that these two processes are strongly related. The aim of this study was to investigate the co-ordination between growth and development using mango trees, which have well-defined developmental stages. Methods Developmental stages, determined in an expert way, and organ sizes, determined from objective measurements, were collected during the vegetative growth and flowering phases of two cultivars of mango, Mangifera indica. For a given cultivar and growth unit type (either vegetative or flowering), a multistage model based on absolute growth rate sequences deduced from the measurements was first built, and then growth stages deduced from the model were compared with developmental stages. Key Results Strong matches were obtained between growth stages and developmental stages, leading to a consistent definition of integrative developmental growth stages. The growth stages highlighted growth asynchronisms between two topologically connected organs, namely the vegetative axis and its leaves. Conclusions Integrative developmental growth stages emphasize that developmental stages are closely related to organ growth rates. The results are discussed in terms of the possible physiological processes underlying these stages, including plant hydraulics, biomechanics and carbohydrate partitioning. PMID:25452250

The enactment stage of end-of-life decision-making for children.

PubMed

Sullivan, Jane Elizabeth; Gillam, Lynn Heather; Monagle, Paul Terence

2018-01-11

Typically pediatric end-of-life decision-making studies have examined the decision-making process, factors, and doctors' and parents' roles. Less attention has focussed on what happens after an end-of-life decision is made; that is, decision enactment and its outcome. This study explored the views and experiences of bereaved parents in end-of-life decision-making for their child. Findings reported relate to parents' experiences of acting on their decision. It is argued that this is one significant stage of the decision-making process. A qualitative methodology was used. Semi-structured interviews were conducted with bereaved parents, who had discussed end-of-life decisions for their child who had a life-limiting condition and who had died. Data were thematically analysed. Twenty-five bereaved parents participated. Findings indicate that, despite differences in context, including the child's condition and age, end-of-life decision-making did not end when an end-of-life decision was made. Enacting the decision was the next stage in a process. Time intervals between stages and enactment pathways varied, but the enactment was always distinguishable as a separate stage. Decision enactment involved making further decisions - parents needed to discern the appropriate time to implement their decision to withdraw or withhold life-sustaining medical treatment. Unexpected events, including other people's actions, impacted on parents enacting their decision in the way they had planned. Several parents had to re-implement decisions when their child recovered from serious health issues without medical intervention. Significance of results A novel, critical finding was that parents experienced end-of-life decision-making as a sequence of interconnected stages, the final stage being enactment. The enactment stage involved further decision-making. End-of-life decision-making is better understood as a process rather than a discrete once-off event. The enactment stage has particular emotional and practical implications for parents. Greater understanding of this stage can improve clinician's support for parents as they care for their child.

Willing to Wait: Elevated Reward-Processing EEG Activity Associated with a Greater Preference for Larger-But-Delayed Rewards

PubMed Central

Pornpattananangkul, Narun; Nusslock, Robin

2016-01-01

While almost everyone discounts the value of future rewards over immediate rewards, people differ in their so-called delay-discounting. One of the several factors that may explain individual differences in delay-discounting is reward-processing. To study individual-differences in reward-processing, however, one needs to consider the heterogeneity of neural-activity at each reward-processing stage. Here using EEG, we separated reward-related neural activity into distinct reward-anticipation and reward-outcome stages using time-frequency characteristics. Thirty-seven individuals completed a behavioral delay-discounting task. Reward-processing EEG activity was assessed using a separate reward-learning task, called a reward time-estimation task. During this task, participants were instructed to estimate time duration and were provided performance feedback on a trial-by-trial basis. Participants received monetary-reward for accurate-performance on Reward trials, but not on No-Reward trials. Reward trials, relative to No-Reward trials, enhanced EEG activity during both reward-anticipation stage (including, cued-locked delta power during cue-evaluation and pre-feedback alpha suppression during feedback-anticipation) and at the reward-outcome stage (including, feedback-locked delta, theta and beta power). Moreover, all of these EEG indices correlated with behavioral performance in the time-estimation task, suggesting their essential roles in learning and adjusting performance to maximize winnings in a reward-learning situation. Importantly, enhanced EEG power during Reward trials for 1) pre-feedback alpha suppression, 2) feedback-locked theta and 3) feedback-locked beta was associated with a greater preference for larger-but-delayed rewards. Results highlight the association between a stronger preference toward larger-but-delayed rewards and enhanced reward-processing. Moreover, our reward-processing EEG indices detail the specific stages of reward-processing where these associations occur. PMID:27477630

Synthesis of Virtual Environments for Aircraft Community Noise Impact Studies

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Sullivan, Brenda M.

2005-01-01

A new capability has been developed for the creation of virtual environments for the study of aircraft community noise. It is applicable for use with both recorded and synthesized aircraft noise. When using synthesized noise, a three-stage process is adopted involving non-real-time prediction and synthesis stages followed by a real-time rendering stage. Included in the prediction-based source noise synthesis are temporal variations associated with changes in operational state, and low frequency fluctuations that are present under all operating conditions. Included in the rendering stage are the effects of spreading loss, absolute delay, atmospheric absorption, ground reflections, and binaural filtering. Results of prediction, synthesis and rendering stages are presented.

A Study of Religious Faith and the Ethical Decision Making Process

DTIC Science & Technology

2007-09-01

Piaget , 1965; and Rest, 1986) leading to the stage models of moral development . Moral development is the change in how people think about ethical...the environment (Coleman & Wilkins, 2004, p. 512). Jean Piaget (1965) showed how young boys developed morally in stages through observing them...decisions” (Kohlberg, 1981, p. 412). Kohlberg continued with his stage development theory to eventually include a Stage 7 (Kohlberg, 1981, p. 310

Operations research methods improve chemotherapy patient appointment scheduling.

PubMed

Santibáñez, Pablo; Aristizabal, Ruben; Puterman, Martin L; Chow, Vincent S; Huang, Wenhai; Kollmannsberger, Christian; Nordin, Travis; Runzer, Nancy; Tyldesley, Scott

2012-12-01

Clinical complexity, scheduling restrictions, and outdated manual booking processes resulted in frequent clerical rework, long waitlists for treatment, and late appointment notification for patients at a chemotherapy clinic in a large cancer center in British Columbia, Canada. A 17-month study was conducted to address booking, scheduling and workload issues and to develop, implement, and evaluate solutions. A review of scheduling practices included process observation and mapping, analysis of historical appointment data, creation of a new performance metric (final appointment notification lead time), and a baseline patient satisfaction survey. Process improvement involved discrete event simulation to evaluate alternative booking practice scenarios, development of an optimization-based scheduling tool to improve scheduling efficiency, and change management for implementation of process changes. Results were evaluated through analysis of appointment data, a follow-up patient survey, and staff surveys. Process review revealed a two-stage scheduling process. Long waitlists and late notification resulted from an inflexible first-stage process. The second-stage process was time consuming and tedious. After a revised, more flexible first-stage process and an automated second-stage process were implemented, the median percentage of appointments exceeding the final appointment notification lead time target of one week was reduced by 57% and median waitlist size decreased by 83%. Patient surveys confirmed increased satisfaction while staff feedback reported reduced stress levels. Significant operational improvements can be achieved through process redesign combined with operations research methods.

Selectivity in associative learning: a cognitive stage framework for blocking and cue competition phenomena

PubMed Central

Boddez, Yannick; Haesen, Kim; Baeyens, Frank; Beckers, Tom

2014-01-01

Blocking is the most important phenomenon in the history of associative learning theory: for over 40 years, blocking has inspired a whole generation of learning models. Blocking is part of a family of effects that are typically termed “cue competition” effects. Common amongst all cue competition effects is that a cue-outcome relation is poorly learned or poorly expressed because the cue is trained in the presence of an alternative predictor or cause of the outcome. We provide an overview of the cognitive processes involved in cue competition effects in humans and propose a stage framework that brings these processes together. The framework contends that the behavioral display of cue competition is cognitively construed following three stages that include (1) an encoding stage, (2) a retention stage, and (3) a performance stage. We argue that the stage framework supports a comprehensive understanding of cue competition effects. PMID:25429280

The excavation stage of basin formation - A qualitative model

NASA Technical Reports Server (NTRS)

Croft, S. K.

1981-01-01

One of the most complex problems in planetary geology and geophysics is the determination of the nature of the impact cratering processes at scales of tens to thousands of kilometers that produce the complex morphological structures of multiring basins. The cratering process is frequently considered to be divided into three stages, including a short high-pressure stage of initial contact between the projectile and the planetary crust, a longer excavation or cratering flow stage culminating in the formation of a transient crater, and a still longer modification stage during which the transient crater is modified into the observed final geologic form. The transient crater may be considered as the initial boundary condition of the modification stage. In the present investigation, the nature of the transient crater is indicated by the cratering flow field determined from numerical simulations of the excavation stage. Attention is given to empirical and theoretical scaling.

Second stage gasifier in staged gasification and integrated process

DOEpatents

Liu, Guohai; Vimalchand, Pannalal; Peng, Wan Wang

2015-10-06

A second stage gasification unit in a staged gasification integrated process flow scheme and operating methods are disclosed to gasify a wide range of low reactivity fuels. The inclusion of second stage gasification unit operating at high temperatures closer to ash fusion temperatures in the bed provides sufficient flexibility in unit configurations, operating conditions and methods to achieve an overall carbon conversion of over 95% for low reactivity materials such as bituminous and anthracite coals, petroleum residues and coke. The second stage gasification unit includes a stationary fluidized bed gasifier operating with a sufficiently turbulent bed of predefined inert bed material with lean char carbon content. The second stage gasifier fluidized bed is operated at relatively high temperatures up to 1400.degree. C. Steam and oxidant mixture can be injected to further increase the freeboard region operating temperature in the range of approximately from 50 to 100.degree. C. above the bed temperature.

A thermochemical-biochemical hybrid processing of lignocellulosic biomass for producing fuels and chemicals.

PubMed

Shen, Yanwen; Jarboe, Laura; Brown, Robert; Wen, Zhiyou

2015-12-01

Thermochemical-biological hybrid processing uses thermochemical decomposition of lignocellulosic biomass to produce a variety of intermediate compounds that can be converted into fuels and chemicals through microbial fermentation. It represents a unique opportunity for biomass conversion as it mitigates some of the deficiencies of conventional biochemical (pretreatment-hydrolysis-fermentation) and thermochemical (pyrolysis or gasification) processing. Thermochemical-biological hybrid processing includes two pathways: (i) pyrolysis/pyrolytic substrate fermentation, and (ii) gasification/syngas fermentation. This paper provides a comprehensive review of these two hybrid processing pathways, including the characteristics of fermentative substrates produced in the thermochemical stage and microbial utilization of these compounds in the fermentation stage. The current challenges of these two biomass conversion pathways include toxicity of the crude pyrolytic substrates, the inhibition of raw syngas contaminants, and the mass-transfer limitations in syngas fermentation. Possible approaches for mitigating substrate toxicities are discussed. The review also provides a summary of the current efforts to commercialize hybrid processing. Copyright © 2015 Elsevier Inc. All rights reserved.

Initial Science Teacher Education in Portugal: The Thoughts of Teacher Educators about the Effects of the Bologna Process

ERIC Educational Resources Information Center

Leite, Laurinda; Dourado, Luís; Morgado, Sofia

2016-01-01

Between the 1980s and 2007, Portugal used to have one-stage (5-year period) initial teacher education (ITE) programs. In 2007 and consistent with the Bologna process guidelines, Portuguese teacher education moved toward a two-stage model, which includes a 3-year undergraduate program of subject matter that leads to a "licenciatura" (or…

Analysing growth and development of plants jointly using developmental growth stages.

PubMed

Dambreville, Anaëlle; Lauri, Pierre-Éric; Normand, Frédéric; Guédon, Yann

2015-01-01

Plant growth, the increase of organ dimensions over time, and development, the change in plant structure, are often studied as two separate processes. However, there is structural and functional evidence that these two processes are strongly related. The aim of this study was to investigate the co-ordination between growth and development using mango trees, which have well-defined developmental stages. Developmental stages, determined in an expert way, and organ sizes, determined from objective measurements, were collected during the vegetative growth and flowering phases of two cultivars of mango, Mangifera indica. For a given cultivar and growth unit type (either vegetative or flowering), a multistage model based on absolute growth rate sequences deduced from the measurements was first built, and then growth stages deduced from the model were compared with developmental stages. Strong matches were obtained between growth stages and developmental stages, leading to a consistent definition of integrative developmental growth stages. The growth stages highlighted growth asynchronisms between two topologically connected organs, namely the vegetative axis and its leaves. Integrative developmental growth stages emphasize that developmental stages are closely related to organ growth rates. The results are discussed in terms of the possible physiological processes underlying these stages, including plant hydraulics, biomechanics and carbohydrate partitioning. © The Author 2014. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Pre-Osteoarthritis

PubMed Central

Brittberg, Mats; Eriksson, Karl; Jurvelin, Jukka S.; Lindahl, Anders; Marlovits, Stefan; Möller, Per; Richardson, James B.; Steinwachs, Matthias; Zenobi-Wong, Marcy

2015-01-01

Objective An attempt to define pre-osteoarthritis (OA) versus early OA and definitive osteoarthritis. Methods A group of specialists in the field of cartilage science and treatment was formed to consider the nature of OA onset and its possible diagnosis. Results Late-stage OA, necessitating total joint replacement, is the end stage of a biological process, with many previous earlier stages. Early-stage OA has been defined and involves structural changes identified by arthroscopy or radiography. The group argued that before the “early-stage OA” there must exist a stage where cellular processes, due to the presence of risk factors, have kicked into action but have not yet resulted in structural changes. The group suggested that this stage could be called “pre-osteoarthritis” (pre-OA). Conclusions The group suggests that defining points of initiation for OA in the knee could be defined, for example, by traumatic episodes or surgical meniscectomy. Such events may set in motion metabolic processes that could be diagnosed by modern MRI protocols or arthroscopy including probing techniques before structural changes of early OA have developed. Preventive measures should preferably be applied at this pre-OA stage in order to stop the projected OA “epidemic.” PMID:26175861

The role of the striatum in rule application: the model of Huntington's disease at early stage.

PubMed

Teichmann, Marc; Dupoux, Emmanuel; Kouider, Sid; Brugières, Pierre; Boissé, Marie-Françoise; Baudic, Sophie; Cesaro, Pierre; Peschanski, Marc; Bachoud-Lévi, Anne-Catherine

2005-05-01

The role of the basal ganglia, and more specifically of the striatum, in language is still debated. Recent studies have proposed that linguistic abilities involve two distinct types of processes: the retrieving of stored information, implicating temporal lobe areas, and the application of combinatorial rules, implicating fronto-striatal circuits. Studies of patients with focal lesions and neurodegenerative diseases have suggested a role for the striatum in morphological rule application, but functional imaging studies found that the left caudate was involved in syntactic processing and not morphological processing. In the present study, we tested the view that the basal ganglia are involved in rule application and not in lexical retrieving in a model of striatal dysfunction, namely Huntington's disease at early stages. We assessed the rule-lexicon dichotomy in the linguistic domain with morphology (conjugation of non-verbs and verbs) and syntax (sentence comprehension) and in a non-linguistic domain with arithmetic operations (subtraction and multiplication). Thirty Huntington's disease patients (15 at stage I and 15 at stage II) and 20 controls matched for their age and cultural level were included in this study. Huntington's disease patients were also assessed using the Unified Huntington's Disease Rating Scale (UHDRS) and MRI. We found that early Huntington's disease patients were impaired in rule application in the linguistic and non-linguistic domains (morphology, syntax and subtraction), whereas they were broadly spared with lexical processing. The pattern of performance was similar in patients at stage I and stage II, except that stage II patients were more impaired in all tasks assessing rules and had in addition a very slight impairment in the lexical condition of conjugation. Finally, syntactic rule abilities correlated with all markers of the disease evolution including bicaudate ratio and performance in executive function, whereas there was no correlation with arithmetic and morphological abilities. Together, this suggests that the striatum is involved in rule processing more than in lexical processing and that it extends to linguistic and non-linguistic domains. These results are discussed in terms of domain-specific versus domain-general processes of rule application.

Secure ADS-B authentication system and method

NASA Technical Reports Server (NTRS)

Viggiano, Marc J (Inventor); Valovage, Edward M (Inventor); Samuelson, Kenneth B (Inventor); Hall, Dana L (Inventor)

2010-01-01

A secure system for authenticating the identity of ADS-B systems, including: an authenticator, including a unique id generator and a transmitter transmitting the unique id to one or more ADS-B transmitters; one or more ADS-B transmitters, including a receiver receiving the unique id, one or more secure processing stages merging the unique id with the ADS-B transmitter's identification, data and secret key and generating a secure code identification and a transmitter transmitting a response containing the secure code and ADSB transmitter's data to the authenticator; the authenticator including means for independently determining each ADS-B transmitter's secret key, a receiver receiving each ADS-B transmitter's response, one or more secure processing stages merging the unique id, ADS-B transmitter's identification and data and generating a secure code, and comparison processing comparing the authenticator-generated secure code and the ADS-B transmitter-generated secure code and providing an authentication signal based on the comparison result.

The ergonomic process of an automotive company in Brazil: a study case.

PubMed

Bustos, Carolina; Fischer, Daniela; Ballardin, Lucimara; Nielsen, Rudolf

2012-01-01

The goal of this paper is to present the ergonomic process of an automotive company, whose focus is on the adaptation of the work conditions to the psychophysiological characteristics of its employees. The planning and the development of the ergonomic actions took place in three distinctive stages: ergonomic analysis of the work post (stage 1), ergonomic adaptations (stage 2) and Ergonomic Committee (stage 3). The activities started in June 2006 and have lasted to the current date, keeping a permanent improving process. The procedure adopted was based on the ergonomic analysis methodology proposed by Wisner (1994:1997) and the stages of the Ergonomic Analysis of Work presented in the 17 NR Regulatory Manual (MET, 2002). The paper's approach focused on the voluntary participation of workers from different areas and different hierarchical levels of the organization throughout all the stages of the process. The methodological procedures included descriptive research techniques, exploratory and qualitative research criteria, background and guidelines available in literature and legislation, as well as company information. Among the main results it can be mentioned the satisfaction of the employees regarding the appropriate work conditions, cultural and organizational changes and the creation of an Ergonomic Committee in the company.

Process for oxidation of hydrogen halides to elemental halogens

DOEpatents

Lyke, Stephen E.

1992-01-01

An improved process for generating an elemental halogen selected from chlorine, bromine or iodine, from a corresponding hydrogen halide by absorbing a molten salt mixture, which includes sulfur, alkali metals and oxygen with a sulfur to metal molar ratio between 0.9 and 1.1 and includes a dissolved oxygen compound capable of reacting with hydrogen halide to produce elemental halogen, into a porous, relatively inert substrate to produce a substrate-supported salt mixture. Thereafter, the substrate-supported salt mixture is contacted (stage 1) with a hydrogen halide while maintaining the substrate-supported salt mixture during the contacting at an elevated temperature sufficient to sustain a reaction between the oxygen compound and the hydrogen halide to produce a gaseous elemental halogen product. This is followed by purging the substrate-supported salt mixture with steam (stage 2) thereby recovering any unreacted hydrogen halide and additional elemental halogen for recycle to stage 1. The dissolved oxygen compound is regenerated in a high temperature (stage 3) and an optical intermediate temperature stage (stage 4) by contacting the substrate-supported salt mixture with a gas containing oxygen whereby the dissolved oxygen compound in the substrate-supported salt mixture is regenerated by being oxidized to a higher valence state.

Role of temporal processing stages by inferior temporal neurons in facial recognition.

PubMed

Sugase-Miyamoto, Yasuko; Matsumoto, Narihisa; Kawano, Kenji

2011-01-01

In this review, we focus on the role of temporal stages of encoded facial information in the visual system, which might enable the efficient determination of species, identity, and expression. Facial recognition is an important function of our brain and is known to be processed in the ventral visual pathway, where visual signals are processed through areas V1, V2, V4, and the inferior temporal (IT) cortex. In the IT cortex, neurons show selective responses to complex visual images such as faces, and at each stage along the pathway the stimulus selectivity of the neural responses becomes sharper, particularly in the later portion of the responses. In the IT cortex of the monkey, facial information is represented by different temporal stages of neural responses, as shown in our previous study: the initial transient response of face-responsive neurons represents information about global categories, i.e., human vs. monkey vs. simple shapes, whilst the later portion of these responses represents information about detailed facial categories, i.e., expression and/or identity. This suggests that the temporal stages of the neuronal firing pattern play an important role in the coding of visual stimuli, including faces. This type of coding may be a plausible mechanism underlying the temporal dynamics of recognition, including the process of detection/categorization followed by the identification of objects. Recent single-unit studies in monkeys have also provided evidence consistent with the important role of the temporal stages of encoded facial information. For example, view-invariant facial identity information is represented in the response at a later period within a region of face-selective neurons. Consistent with these findings, temporally modulated neural activity has also been observed in human studies. These results suggest a close correlation between the temporal processing stages of facial information by IT neurons and the temporal dynamics of face recognition.

Role of Temporal Processing Stages by Inferior Temporal Neurons in Facial Recognition

PubMed Central

Sugase-Miyamoto, Yasuko; Matsumoto, Narihisa; Kawano, Kenji

2011-01-01

In this review, we focus on the role of temporal stages of encoded facial information in the visual system, which might enable the efficient determination of species, identity, and expression. Facial recognition is an important function of our brain and is known to be processed in the ventral visual pathway, where visual signals are processed through areas V1, V2, V4, and the inferior temporal (IT) cortex. In the IT cortex, neurons show selective responses to complex visual images such as faces, and at each stage along the pathway the stimulus selectivity of the neural responses becomes sharper, particularly in the later portion of the responses. In the IT cortex of the monkey, facial information is represented by different temporal stages of neural responses, as shown in our previous study: the initial transient response of face-responsive neurons represents information about global categories, i.e., human vs. monkey vs. simple shapes, whilst the later portion of these responses represents information about detailed facial categories, i.e., expression and/or identity. This suggests that the temporal stages of the neuronal firing pattern play an important role in the coding of visual stimuli, including faces. This type of coding may be a plausible mechanism underlying the temporal dynamics of recognition, including the process of detection/categorization followed by the identification of objects. Recent single-unit studies in monkeys have also provided evidence consistent with the important role of the temporal stages of encoded facial information. For example, view-invariant facial identity information is represented in the response at a later period within a region of face-selective neurons. Consistent with these findings, temporally modulated neural activity has also been observed in human studies. These results suggest a close correlation between the temporal processing stages of facial information by IT neurons and the temporal dynamics of face recognition. PMID:21734904

Behavioral, demographic, psychosocial, and sociocultural concomitants of stage of change for physical activity behavior in a mixed-culture sample.

PubMed

Cardinal, Bradley J; Lee, Jong-Young; Kim, Young-Ho; Lee, Hyo; Li, Kin-Kit; Si, Qi

2009-01-01

Examine behavioral, demographic, psychosocial, and sociocultural concomitants of the stages of change for physical activity behavior among college students in South Korea (n = 221) and the United States (n = 166). Measures obtained in this cross-sectional study included age; body mass index; nationality; gender; exercise behavior; processes of change; decisional balance; self-efficacy; stage of change; and predisposing, reinforcing, and enabling factors. The amount of variance explained for stage of change by the transtheoretical model constructs (i.e., decisional balance, processes of change, self-efficacy) ranged from 11% to 29% (all p < .001), whereas the predisposing (2%; p = .052), reinforcing (3%; p = .06), and enabling (5%; p < .001) factors were not as important. In multivariate ordinal logistic regression analysis, gender (odds ratio [OR] = 3.3; p < .001), gender by nationality interaction (OR = .27; p < .01), weekly exercise behavior (OR = 1.04; p < .001), and behavioral processes of change (OR = 1.12; p < .001) were each significant concomitants of the stages of change. In terms of physical activity behavior, South Korean women were more likely than South Korean men to be in the early stages, whereas American men were slightly more likely to be in the early stages than American women when all the concomitants were accounted for. Among the psychosocial stage of change concomitants, only the behavioral processes of change were found to be important.

Integrating Evidence From Systematic Reviews, Qualitative Research, and Expert Knowledge Using Co-Design Techniques to Develop a Web-Based Intervention for People in the Retirement Transition

PubMed Central

O'Brien, Nicola; Heaven, Ben; Teal, Gemma; Evans, Elizabeth H; Cleland, Claire; Moffatt, Suzanne; Sniehotta, Falko F; White, Martin; Mathers, John C

2016-01-01

Background Integrating stakeholder involvement in complex health intervention design maximizes acceptability and potential effectiveness. However, there is little methodological guidance about how to integrate evidence systematically from various sources in this process. Scientific evidence derived from different approaches can be difficult to integrate and the problem is compounded when attempting to include diverse, subjective input from stakeholders. Objective The intent of the study was to describe and appraise a systematic, sequential approach to integrate scientific evidence, expert knowledge and experience, and stakeholder involvement in the co-design and development of a complex health intervention. The development of a Web-based lifestyle intervention for people in retirement is used as an example. Methods Evidence from three systematic reviews, qualitative research findings, and expert knowledge was compiled to produce evidence statements (stage 1). Face validity of these statements was assessed by key stakeholders in a co-design workshop resulting in a set of intervention principles (stage 2). These principles were assessed for face validity in a second workshop, resulting in core intervention concepts and hand-drawn prototypes (stage 3). The outputs from stages 1-3 were translated into a design brief and specification (stage 4), which guided the building of a functioning prototype, Web-based intervention (stage 5). This prototype was de-risked resulting in an optimized functioning prototype (stage 6), which was subject to iterative testing and optimization (stage 7), prior to formal pilot evaluation. Results The evidence statements (stage 1) highlighted the effectiveness of physical activity, dietary and social role interventions in retirement; the idiosyncratic nature of retirement and well-being; the value of using specific behavior change techniques including those derived from the Health Action Process Approach; and the need for signposting to local resources. The intervention principles (stage 2) included the need to facilitate self-reflection on available resources, personalization, and promotion of links between key lifestyle behaviors. The core concepts and hand-drawn prototypes (stage 3) had embedded in them the importance of time use and work exit planning, personalized goal setting, and acceptance of a Web-based intervention. The design brief detailed the features and modules required (stage 4), guiding the development of wireframes, module content and functionality, virtual mentors, and intervention branding (stage 5). Following an iterative process of intervention testing and optimization (stage 6), the final Web-based intervention prototype of LEAP (Living, Eating, Activity, and Planning in retirement) was produced (stage 7). The approach was resource intensive and required a multidisciplinary team. The design expert made an invaluable contribution throughout the process. Conclusions Our sequential approach fills an important methodological gap in the literature, describing the stages and techniques useful in developing an evidence-based complex health intervention. The systematic and rigorous integration of scientific evidence, expert knowledge and experience, and stakeholder input has resulted in an intervention likely to be acceptable and feasible. PMID:27489143

Integrating Evidence From Systematic Reviews, Qualitative Research, and Expert Knowledge Using Co-Design Techniques to Develop a Web-Based Intervention for People in the Retirement Transition.

PubMed

O'Brien, Nicola; Heaven, Ben; Teal, Gemma; Evans, Elizabeth H; Cleland, Claire; Moffatt, Suzanne; Sniehotta, Falko F; White, Martin; Mathers, John C; Moynihan, Paula

2016-08-03

Integrating stakeholder involvement in complex health intervention design maximizes acceptability and potential effectiveness. However, there is little methodological guidance about how to integrate evidence systematically from various sources in this process. Scientific evidence derived from different approaches can be difficult to integrate and the problem is compounded when attempting to include diverse, subjective input from stakeholders. The intent of the study was to describe and appraise a systematic, sequential approach to integrate scientific evidence, expert knowledge and experience, and stakeholder involvement in the co-design and development of a complex health intervention. The development of a Web-based lifestyle intervention for people in retirement is used as an example. Evidence from three systematic reviews, qualitative research findings, and expert knowledge was compiled to produce evidence statements (stage 1). Face validity of these statements was assessed by key stakeholders in a co-design workshop resulting in a set of intervention principles (stage 2). These principles were assessed for face validity in a second workshop, resulting in core intervention concepts and hand-drawn prototypes (stage 3). The outputs from stages 1-3 were translated into a design brief and specification (stage 4), which guided the building of a functioning prototype, Web-based intervention (stage 5). This prototype was de-risked resulting in an optimized functioning prototype (stage 6), which was subject to iterative testing and optimization (stage 7), prior to formal pilot evaluation. The evidence statements (stage 1) highlighted the effectiveness of physical activity, dietary and social role interventions in retirement; the idiosyncratic nature of retirement and well-being; the value of using specific behavior change techniques including those derived from the Health Action Process Approach; and the need for signposting to local resources. The intervention principles (stage 2) included the need to facilitate self-reflection on available resources, personalization, and promotion of links between key lifestyle behaviors. The core concepts and hand-drawn prototypes (stage 3) had embedded in them the importance of time use and work exit planning, personalized goal setting, and acceptance of a Web-based intervention. The design brief detailed the features and modules required (stage 4), guiding the development of wireframes, module content and functionality, virtual mentors, and intervention branding (stage 5). Following an iterative process of intervention testing and optimization (stage 6), the final Web-based intervention prototype of LEAP (Living, Eating, Activity, and Planning in retirement) was produced (stage 7). The approach was resource intensive and required a multidisciplinary team. The design expert made an invaluable contribution throughout the process. Our sequential approach fills an important methodological gap in the literature, describing the stages and techniques useful in developing an evidence-based complex health intervention. The systematic and rigorous integration of scientific evidence, expert knowledge and experience, and stakeholder input has resulted in an intervention likely to be acceptable and feasible.

Assessing the impact of electronic health records as an enabler of hospital quality and patient satisfaction.

PubMed

Jarvis, Benjamin; Johnson, Tricia; Butler, Peter; O'Shaughnessy, Kathryn; Fullam, Francis; Tran, Lac; Gupta, Richa

2013-10-01

To assess the impact of using an advanced electronic health record (EHR) on hospital quality and patient satisfaction. This retrospective, cross-sectional analysis was conducted in 2012 to evaluate the association between advanced EHR use (Healthcare Information Management Systems Society [HIMSS] Stage 6 or 7 as of December 2012) and estimated process and experience of care scores for hospitals under the Medicare Hospital Value-Based Purchasing Program, using data from the American Hospital Association for 2008 to 2010. Generalized linear regression models were fit to test the association between advanced EHR use with process of care and experience of care, controlling for hospital characteristics. In a second analysis, the models included variables to account for HIMSS stage of advanced EHR use. The study included 2,988 hospitals, with 248 (8.3%) classified as advanced EHR users (HIMSS Stage 6 or 7). After controlling for hospital characteristics, advanced EHR use was associated with a 4.2-point-higher process of care score (P < .001). Hospitals with Stage 7 EHRs had 11.7 points higher process of care scores, but Stage 6 users had scores that were not substantially different from those of nonadvanced users. There was no significant difference in estimated experience of care scores by level of advanced EHR use. This study evaluated the effectiveness of the U.S. federal government's investment in hospital information technology infrastructure. Results suggest that the most advanced EHRs have the greatest payoff in improving clinical process of care scores, without detrimentally impacting the patient experience.

An Interactive Procedure to Preserve the Desired Edges during the Image Processing of Noise Reduction

NASA Astrophysics Data System (ADS)

Hsu, Chih-Yu; Huang, Hsuan-Yu; Lee, Lin-Tsang

2010-12-01

The paper propose a new procedure including four stages in order to preserve the desired edges during the image processing of noise reduction. A denoised image can be obtained from a noisy image at the first stage of the procedure. At the second stage, an edge map can be obtained by the Canny edge detector to find the edges of the object contours. Manual modification of an edge map at the third stage is optional to capture all the desired edges of the object contours. At the final stage, a new method called Edge Preserved Inhomogeneous Diffusion Equation (EPIDE) is used to smooth the noisy images or the previously denoised image at the first stage for achieving the edge preservation. The Optical Character Recognition (OCR) results in the experiments show that the proposed procedure has the best recognition result because of the capability of edge preservation.

A multi-stage compartmental model for HIV-infected individuals: II--application to insurance functions and health-care costs.

PubMed

Billard, L; Dayananda, P W A

2014-03-01

Stochastic population processes have received a lot of attention over the years. One approach focuses on compartmental modeling. Billard and Dayananda (2012) developed one such multi-stage model for epidemic processes in which the possibility that individuals can die at any stage from non-disease related causes was also included. This extra feature is of particular interest to the insurance and health-care industries among others especially when the epidemic is HIV/AIDS. Rather than working with numbers of individuals in each stage, they obtained distributional results dealing with the waiting time any one individual spent in each stage given the initial stage. In this work, the impact of the HIV/AIDS epidemic on several functions relevant to these industries (such as adjustments to premiums) is investigated. Theoretical results are derived, followed by a numerical study. Copyright © 2014 Elsevier Inc. All rights reserved.

Taking Brief Strategic Family Therapy from Bench to Trench: Evidence Generation Across Translational Phases.

PubMed

Horigian, Viviana E; Anderson, Austen R; Szapocznik, José

2016-09-01

In this article, we review the research evidence generated over 40 years on Brief Strategic Family Therapy illustrating the NIH stages of intervention development and highlighting the translational process. Basic research (Stage 0) led to the discovery of the characteristics of the population and the nature of the problems that needed to be addressed. This step informed the selection of an intervention model that addressed the problems presented by the population, but in a fashion that was congruent with the population's culture, defined in terms of its value orientations. From this basic research, an intervention that integrated structural and strategic elements was selected and refined through testing (Stage I). The second stage of translation (Stage II) included efficacy trials of a specialized engagement module that responded to challenges to the provision of services. It also included several other efficacy trials that documented the effects of the intervention, mostly in research settings or with research therapists. Stages III/IV in the translational process led to the testing of the effectiveness of the intervention in real-world settings with community therapists and some oversight from the developer. This work revealed that an implementation/organizational intervention was required to achieve fidelity and sustainability of the intervention in real-world settings. The work is currently in Stage V in which new model development led to an implementation intervention that can ensure fidelity and sustainability. Future research will evaluate the effectiveness of the current implementation model in increasing adoption, fidelity, and long-term sustainability in real-world settings. © 2016 Family Process Institute.

Coal liquefaction process

DOEpatents

Maa, Peter S.

1978-01-01

A process for liquefying a particulate coal feed to produce useful petroleum-like liquid products which comprises contacting; in a series of two or more coal liquefaction zones, or stages, graded with respect to temperature, an admixture of a polar compound; or compounds, a hydrogen donor solvent and particulate coal, the total effluent being passed in each instance from a low temperature zone, or stage to the next succeeding higher temperature zone, or stage, of the series. The temperature within the initial zone, or stage, of the series is maintained about 70.degree. F and 750.degree. F and the temperature within the final zone, or stage, is maintained between about 750.degree. F and 950.degree. F. The residence time within the first zone, or stage, ranges, generally, from about 20 to about 150 minutes and residence time within each of the remaining zones, or stages, of the series ranges, generally, from about 10 minutes to about 70 minutes. Further steps of the process include: separating the product from the liquefaction zone into fractions inclusive of a liquid solvent fraction; hydrotreating said liquid solvent fraction in a hydrogenation zone; and recycling the hydrogenated liquid solvent mixture to said coal liquefaction zones.

Multiscale spectral nanoscopy

DOEpatents

Yang, Haw; Welsher, Kevin

2016-11-15

A system and method for non-invasively tracking a particle in a sample is disclosed. The system includes a 2-photon or confocal laser scanning microscope (LSM) and a particle-holding device coupled to a stage with X-Y and Z position control. The system also includes a tracking module having a tracking excitation laser, X-Y and Z radiation-gathering components configured to detect deviations of the particle in an X-Y and Z directions. The system also includes a processor coupled to the X-Y and Z radiation gathering components, generate control signals configured to drive the stage X-Y and Z position controls to track the movement of the particle. The system may also include a synchronization module configured to generate LSM pixels stamped with stage position and a processing module configured to generate a 3D image showing the 3D trajectory of a particle using the LSM pixels stamped with stage position.

Bicarbonate Transport During Enamel Maturation.

PubMed

Yin, Kaifeng; Paine, Michael L

2017-11-01

Amelogenesis (tooth enamel formation) is a biomineralization process consisting primarily of two stages (secretory stage and maturation stage) with unique features. During the secretory stage, the inner epithelium of the enamel organ (i.e., the ameloblast cells) synthesizes and secretes enamel matrix proteins (EMPs) into the enamel space. The protein-rich enamel matrix forms a highly organized architecture in a pH-neutral microenvironment. As amelogenesis transitions to maturation stage, EMPs are degraded and internalized by ameloblasts through endosomal-lysosomal pathways. Enamel crystallite formation is initiated early in the secretory stage, however, during maturation stage the more rapid deposition of calcium and phosphate into the enamel space results in a rapid expansion of crystallite length and mineral volume. During maturation-stage amelogenesis, the pH value of enamel varies considerably from slightly above neutral to acidic. Extracellular acid-base balance during enamel maturation is tightly controlled by ameloblast-mediated regulatory networks, which include significant synthesis and movement of bicarbonate ions from both the enamel papillary layer cells and ameloblasts. In this review we summarize the carbonic anhydrases and the carbonate transporters/exchangers involved in pH regulation in maturation-stage amelogenesis. Proteins that have been shown to be instrumental in this process include CA2, CA6, CFTR, AE2, NBCe1, SLC26A1/SAT1, SLC26A3/DRA, SLC26A4/PDS, SLC26A6/PAT1, and SLC26A7/SUT2. In addition, we discuss the association of miRNA regulation with bicarbonate transport in tooth enamel formation.

Functional characterization of the Drosophila MRP (mitochondrial RNA processing) RNA gene.

PubMed

Schneider, Mary D; Bains, Anupinder K; Rajendra, T K; Dominski, Zbigniew; Matera, A Gregory; Simmonds, Andrew J

2010-11-01

MRP RNA is a noncoding RNA component of RNase mitochondrial RNA processing (MRP), a multi-protein eukaryotic endoribonuclease reported to function in multiple cellular processes, including ribosomal RNA processing, mitochondrial DNA replication, and cell cycle regulation. A recent study predicted a potential Drosophila ortholog of MRP RNA (CR33682) by computer-based genome analysis. We have confirmed the expression of this gene and characterized the phenotype associated with this locus. Flies with mutations that specifically affect MRP RNA show defects in growth and development that begin in the early larval period and end in larval death during the second instar stage. We present several lines of evidence demonstrating a role for Drosophila MRP RNA in rRNA processing. The nuclear fraction of Drosophila MRP RNA localizes to the nucleolus. Further, a mutant strain shows defects in rRNA processing that include a defect in 5.8S rRNA processing, typical of MRP RNA mutants in other species, as well as defects in early stages of rRNA processing.

Dataset of quantitative spectral EEG of different stages of kindling acquisition in rats.

PubMed

Jalilifar, Mostafa; Yadollahpour, Ali

2018-02-01

The data represented here are in relation with the manuscript "Quantitative assessments of extracellular EEG to classify specific features of main phases of seizure acquisition based on kindling model in Rat" (Jalilifar et al., 2017) [1] which quantitatively classified different main stages of the kindling process based on their electrophysiological characteristics using EEG signal processing. The data in the graphical form reported the contribution of different sub bands of EEG in different stages of kindling- induced epileptogenesis. Only EEG signals related to stages 1-2 (initial seizure stages (ISSs)), 3 (localized seizure stage (LSS)), and 4-5 (generalized seizure stages (GSSs) were transferred into frequency function by Fast Fourier Transform (FFT) and their power spectrum and power of each sub bands including delta (1-4 Hz), Theta (4-8 Hz), alpha (8-12 Hz), beta (12-28 Hz), gamma (28-40 Hz) were calculated with MATLAB 2013b. Accordingly, all results were obtained quantitatively which can contribute to reduce the errors in the behavioral assessments.

Application of the Transtheoretical Model of behavior change to the physical activity behavior of WIC mothers.

PubMed

Fahrenwald, Nancy L; Walker, Susan Noble

2003-01-01

This descriptive-correlational study examined the Transtheoretical Model (TTM) of behavior change in relationship to the physical activity behavior of mothers receiving assistance from the Women, Infants, and Children program. A purposive sample (N = 30) of six women at each of the five stages of readiness for behavior change was used. Relationships between stage of behavior change (measured using the Stage of Exercise Adoption tool) and other TTM constructs were examined. The constructs and corresponding instruments included physical activity behavior (Seven-Day Physical Activity Recall), pros, cons, decisional balance (Exercise Benefits/Barriers Scale and two open-ended questions), self-efficacy (Self-efficacy for Exercise scale), and processes of behavior change (Processes of Exercise Adoption tool and the Social Support for Exercise scale). Significant relationships were found between stage of behavior change and two physical activity energy expenditure indices (rs = 0.71-0.73, p < 0.01), daily minutes of moderate to very hard physical activity (rs = 0.81, p < 0.01), pros (rs = 0.56, p < 0.01), cons (rs = -0.52, p < 0.05), decisional balance (rs = 0.56, p < 0.01), and self-efficacy (rs = 0.56, p < 0.01). Use of the 10 processes of change differed by stage of change. Pros to physical activity included a sense of accomplishment, increased strength, stress relief, and getting in shape after pregnancy. Cons included fatigue, childcare, and cold weather. Results support the TTM as relevant to WIC mothers and suggest strategies to increase physical activity in this population.

An Information Processing View of Field Dependence-Independence.

ERIC Educational Resources Information Center

Davis, J. Kent; Cochran, Kathryn F.

1989-01-01

Discusses field dependence-independence from an information processing perspective. Topics discussed include field dependence theory, stages of information processing, developmental issues and implications, and future directions. The information reviewed indicates that field-independent individuals are more efficient than field-dependent…

Materials, Processes and Manufacturing in Ares 1 Upper Stage: Integration with Systems Design and Development

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.

2008-01-01

Ares I Crew Launch Vehicle Upper Stage is designed and developed based on sound systems engineering principles. Systems Engineering starts with Concept of Operations and Mission requirements, which in turn determine the launch system architecture and its performance requirements. The Ares I-Upper Stage is designed and developed to meet these requirements. Designers depend on the support from materials, processes and manufacturing during the design, development and verification of subsystems and components. The requirements relative to reliability, safety, operability and availability are also dependent on materials availability, characterization, process maturation and vendor support. This paper discusses the roles and responsibilities of materials and manufacturing engineering during the various phases of Ares IUS development, including design and analysis, hardware development, test and verification. Emphasis is placed how materials, processes and manufacturing support is integrated over the Upper Stage Project, both horizontally and vertically. In addition, the paper describes the approach used to ensure compliance with materials, processes, and manufacturing requirements during the project cycle, with focus on hardware systems design and development.

If Anything Can Go Wrong, Maybe It Will.

ERIC Educational Resources Information Center

Wager, Jane C.; Rayner, Gail T.

Thirty personnel involved in various stages of the Training Extension Course (TEC) design, development, and distribution process were interviewed by telephone to determine the major problems perceived within each stage of the program, which provides validated extension training wherever U.S. soldiers are stationed. Those interviewed included TEC…

Word Recognition: Theoretical Issues and Instructional Hints.

ERIC Educational Resources Information Center

Smith, Edward E.; Kleiman, Glenn M.

Research on adult readers' word recognition skills is used in this paper to develop a general information processing model of reading. Stages of the model include feature extraction, interpretation, lexical access, working memory, and integration. Of those stages, particular attention is given to the units of interpretation, speech recoding and…

36 CFR 73.9 - World Heritage criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... within a cultural area of the world, on developments in architecture or technology, monumental arts, town... significant stage(s) in human history; or (v) Be an outstanding example of a traditional human settlement or... history, including the record of life, significant on-going geological processes in the development of...

Ares I Crew Launch Vehicle Upper Stage Element Overview

NASA Technical Reports Server (NTRS)

McArthur, J. Craig

2008-01-01

This viewgraph presentation gives an overview of NASA's Ares I Crew Launch Vehicle Upper Stage Element. The topics include: 1) What is NASA s Mission?; 2) NASA s Exploration Roadmap What is our time line?; 3) Building on a Foundation of Proven Technologies Launch Vehicle Comparisons; 4) Ares I Upper Stage; 5) Upper Stage Primary Products; 6) Ares I Upper Stage Development Approach; 7) What progress have we made?; 8) Upper Stage Subsystem Highlights; 9) Structural Testing; 10) Common Bulkhead Processing; 11) Stage Installation at Stennis Space Center; 12) Boeing Producibility Team; 13) Upper Stage Low Cost Strategy; 14) Ares I and V Production at Michoud Assembly Facility (MAF); 15) Merged Manufacturing Flow; and 16) Manufacturing and Assembly Weld Tools.

Process for conversion of lignin to reformulated, partially oxygenated gasoline

DOEpatents

Shabtai, Joseph S.; Zmierczak, Wlodzimierz W.; Chornet, Esteban

2001-01-09

A high-yield process for converting lignin into reformulated, partially oxygenated gasoline compositions of high quality is provided. The process is a two-stage catalytic reaction process that produces a reformulated, partially oxygenated gasoline product with a controlled amount of aromatics. In the first stage of the process, a lignin feed material is subjected to a base-catalyzed depolymerization reaction, followed by a selective hydrocracking reaction which utilizes a superacid catalyst to produce a high oxygen-content depolymerized lignin product mainly composed of alkylated phenols, alkylated alkoxyphenols, and alkylbenzenes. In the second stage of the process, the depolymerized lignin product is subjected to an exhaustive etherification reaction, optionally followed by a partial ring hydrogenation reaction, to produce a reformulated, partially oxygenated/etherified gasoline product, which includes a mixture of substituted phenyl/methyl ethers, cycloalkyl methyl ethers, C.sub.7 -C.sub.10 alkylbenzenes, C.sub.6 -C.sub.10 branched and multibranched paraffins, and alkylated and polyalkylated cycloalkanes.

Current strategies with 1-stage prosthetic breast reconstruction

PubMed Central

2015-01-01

Background 1-stage prosthetic breast reconstruction is gaining traction as a preferred method of breast reconstruction in select patients who undergo mastectomy for cancer or prevention. Methods Critical elements to the procedure including patient selection, technique, surgical judgment, and postoperative care were reviewed. Results Outcomes series reveal that in properly selected patients, direct-to-implant (DTI) reconstruction has similar low rates of complications and high rates of patient satisfaction compared to traditional 2-stage reconstruction. Conclusions 1-stage prosthetic breast reconstruction may be the procedure of choice in select patients undergoing mastectomy. Advantages include the potential for the entire reconstructive process to be complete in one surgery, the quick return to normal activities, and lack of donor site morbidity. PMID:26005643

Countercurrent direct contact heat exchange process and system

DOEpatents

Wahl, III, Edward F.; Boucher, Frederic B.

1979-01-01

Recovery of energy from geothermal brines and other hot water sources by direct contact heat exchange with a working fluid, such as a hydrocarbon working fluid, e.g. isobutane. The process and system consists of a plurality of stages, each stage including mixing and settling units. In the first stage, hot brine and arm working fluid are intimately mixed and passed into a settler wherein the brine settles to the bottom of the settler and the hot working fluid rises to the top. The hot working fluid is passed to a heat engine or turbine to produce work and the working fluid is then recycled back into the system. The system is comprised of a series of stages each containing a settler and mixer, and wherein the working fluid and the brine flow in a countercurrent manner through the stages to recover the heat from the brine in increments and raise the temperature of the working fluid in increments.

Estimating Total Electron Content Using 1,000+ GPS Receivers

NASA Technical Reports Server (NTRS)

Komjathy, Attila; Mannucci, Anthony

2006-01-01

A computer program uses data from more than 1,000 Global Positioning System (GPS) receivers in an Internet-accessible global network to generate daily estimates of the global distribution of vertical total electron content (VTEC) of the ionosphere. This program supersedes an older program capable of processing readings from only about 200 GPS receivers. This program downloads the data via the Internet, then processes the data in three stages. In the first stage, raw data from a global subnetwork of about 200 receivers are preprocessed, station by station, in a Kalman-filter-based least-squares estimation scheme that estimates satellite and receiver differential biases for these receivers and for satellites. In the second stage, an observation equation that incorporates the results from the first stage and the raw data from the remaining 800 receivers is solved to obtain the differential biases for these receivers. The only remaining error sources for which an account cannot be given are multipath and receiver noise contributions. The third stage is a postprocessing stage in which all the processed data are combined and used to generate new data products, including receiver differential biases and global and regional VTEC maps and animations.

Two-stage anaerobic digestion enables heavy metal removal.

PubMed

Selling, Robert; Håkansson, Torbjörn; Björnsson, Lovisa

2008-01-01

To fully exploit the environmental benefits of the biogas process, the digestate should be recycled as biofertiliser to agriculture. This practice can however be jeopardized by the presence of unwanted compounds such as heavy metals in the digestate. By using two-stage digestion, where the first stage includes hydrolysis/acidification and liquefaction of the substrate, heavy metals can be transferred to the leachate. From the leachate, metals can then be removed by adsorption. In this study, up to 70% of the Ni, 40% of the Zn and 25% of the Cd present in maize was removed when the leachate from hydrolysis was circulated over a macroporous polyacrylamide column for 6 days. For Cu and Pb, the mobilization in the hydrolytic stage was lower which resulted in a low removal. A more efficient two-stage process with improved substrate hydrolysis would give lower pH and/or longer periods with low pH in the hydrolytic stage. This is likely to increase metal mobilisation, and would open up for an excellent opportunity of heavy metal removal.

Process for conversion of lignin to reformulated hydrocarbon gasoline

DOEpatents

Shabtai, Joseph S.; Zmierczak, Wlodzimierz W.; Chornet, Esteban

1999-09-28

A process for converting lignin into high-quality reformulated hydrocarbon gasoline compositions in high yields is disclosed. The process is a two-stage, catalytic reaction process that produces a reformulated hydrocarbon gasoline product with a controlled amount of aromatics. In the first stage, a lignin material is subjected to a base-catalyzed depolymerization reaction in the presence of a supercritical alcohol as a reaction medium, to thereby produce a depolymerized lignin product. In the second stage, the depolymerized lignin product is subjected to a sequential two-step hydroprocessing reaction to produce a reformulated hydrocarbon gasoline product. In the first hydroprocessing step, the depolymerized lignin is contacted with a hydrodeoxygenation catalyst to produce a hydrodeoxygenated intermediate product. In the second hydroprocessing step, the hydrodeoxygenated intermediate product is contacted with a hydrocracking/ring hydrogenation catalyst to produce the reformulated hydrocarbon gasoline product which includes various desirable naphthenic and paraffinic compounds.

A Four-Stage Model for Planning Computer-Based Instruction.

ERIC Educational Resources Information Center

Morrison, Gary R.; Ross, Steven M.

1988-01-01

Describes a flexible planning process for developing computer based instruction (CBI) in which the CBI design is implemented on paper between the lesson design and the program production. A four-stage model is explained, including (1) an initial flowchart, (2) storyboards, (3) a detailed flowchart, and (4) an evaluation. (16 references)…

2D biological representations with reduced speckle obtained from two perpendicular ultrasonic arrays.

PubMed

Rodriguez-Hernandez, Miguel A; Gomez-Sacristan, Angel; Sempere-Payá, Víctor M

2016-04-29

Ultrasound diagnosis is a widely used medical tool. Among the various ultrasound techniques, ultrasonic imaging is particularly relevant. This paper presents an improvement to a two-dimensional (2D) ultrasonic system using measurements taken from perpendicular planes, where digital signal processing techniques are used to combine one-dimensional (1D) A-scans were acquired by individual transducers in arrays located in perpendicular planes. An algorithm used to combine measurements is improved based on the wavelet transform, which includes a denoising step during the 2D representation generation process. The inclusion of this new denoising stage generates higher quality 2D representations with a reduced level of speckling. The paper includes different 2D representations obtained from noisy A-scans and compares the improvements obtained by including the denoising stage.

Emotion and attention: event-related brain potential studies.

PubMed

Schupp, Harald T; Flaisch, Tobias; Stockburger, Jessica; Junghöfer, Markus

2006-01-01

Emotional pictures guide selective visual attention. A series of event-related brain potential (ERP) studies is reviewed demonstrating the consistent and robust modulation of specific ERP components by emotional images. Specifically, pictures depicting natural pleasant and unpleasant scenes are associated with an increased early posterior negativity, late positive potential, and sustained positive slow wave compared with neutral contents. These modulations are considered to index different stages of stimulus processing including perceptual encoding, stimulus representation in working memory, and elaborate stimulus evaluation. Furthermore, the review includes a discussion of studies exploring the interaction of motivated attention with passive and active forms of attentional control. Recent research is reviewed exploring the selective processing of emotional cues as a function of stimulus novelty, emotional prime pictures, learned stimulus significance, and in the context of explicit attention tasks. It is concluded that ERP measures are useful to assess the emotion-attention interface at the level of distinct processing stages. Results are discussed within the context of two-stage models of stimulus perception brought out by studies of attention, orienting, and learning.

Effect of ripeness stage during processing on Listeria monocytogenes growth on fresh-cut 'Conference' pears.

PubMed

Colás-Medà, Pilar; Abadias, Maribel; Alegre, Isabel; Usall, Josep; Viñas, Inmaculada

2015-08-01

There are several factors that affect the shelf life of fresh-cut fruit, including the cultivar, the ripeness stage of the fruit during processing and the fruit's storage atmosphere and temperature. The effect of fruit ripeness during processing on the survival and growth of Listeria monocytogenes on fresh-cut 'Conference' pear slices at different temperatures (5, 10 and 20 °C) was studied. The four ripeness stages studied in this work (assessed by a fruit's firmness) were mature-green (54-60 N), partially ripe (43-53 N), ripe (31-42 N) and overripe (<31 N). In our studies, pH, acidity and soluble solids content did not significantly change during conditioning at 20 °C. L. monocytogenes grew under all experimental conditions, showing an increase of approximately 2 log CFU g(-1) after 8 days of storage at 5 °C. There were significant differences in the L. monocytogenes population between different ripeness stages at the end of the experiments at 10 and 20 °C. Regardless of the ripeness stage of a fresh-cut pear, the growth potential of L. monocytogenes increased with increasing temperature. A pear's ripeness stage during processing is an important consideration to ensure the quality of a fresh-cut pear, but it is not as important for preventing L. monocytogenes growth at common storage temperatures. Copyright © 2015 Elsevier Ltd. All rights reserved.

A real time ECG signal processing application for arrhythmia detection on portable devices

NASA Astrophysics Data System (ADS)

Georganis, A.; Doulgeraki, N.; Asvestas, P.

2017-11-01

Arrhythmia describes the disorders of normal heart rate, which, depending on the case, can even be fatal for a patient with severe history of heart disease. The purpose of this work is to develop an application for heart signal visualization, processing and analysis in Android portable devices e.g. Mobile phones, tablets, etc. The application is able to retrieve the signal initially from a file and at a later stage this signal is processed and analysed within the device so that it can be classified according to the features of the arrhythmia. In the processing and analysing stage, different algorithms are included among them the Moving Average and Pan Tompkins algorithm as well as the use of wavelets, in order to extract features and characteristics. At the final stage, testing is performed by simulating our application in real-time records, using the TCP network protocol for communicating the mobile with a simulated signal source. The classification of ECG beat to be processed is performed by neural networks.

Integrated butanol recovery for an advanced biofuel: current state and prospects.

PubMed

Xue, Chuang; Zhao, Jing-Bo; Chen, Li-Jie; Bai, Feng-Wu; Yang, Shang-Tian; Sun, Jian-Xin

2014-04-01

Butanol has recently gained increasing interest due to escalating prices in petroleum fuels and concerns on the energy crisis. However, the butanol production cost with conventional acetone-butanol-ethanol fermentation by Clostridium spp. was higher than that of petrochemical processes due to the low butanol titer, yield, and productivity in bioprocesses. In particular, a low butanol titer usually leads to an extremely high recovery cost. Conventional biobutanol recovery by distillation is an energy-intensive process, which has largely restricted the economic production of biobutanol. This article thus reviews the latest studies on butanol recovery techniques including gas stripping, liquid-liquid extraction, adsorption, and membrane-based techniques, which can be used for in situ recovery of inhibitory products to enhance butanol production. The productivity of the fermentation system is improved efficiently using the in situ recovery technology; however, the recovered butanol titer remains low due to the limitations from each one of these recovery technologies, especially when the feed butanol concentration is lower than 1 % (w/v). Therefore, several innovative multi-stage hybrid processes have been proposed and are discussed in this review. These hybrid processes including two-stage gas stripping and multi-stage pervaporation have high butanol selectivity, considerably higher energy and production efficiency, and should outperform the conventional processes using single separation step or method. The development of these new integrated processes will give a momentum for the sustainable production of industrial biobutanol.

National and State Writing Tests: The Writing Process Betrayed

ERIC Educational Resources Information Center

Schuster, Edgar H.

2004-01-01

State academic standards broadly support the writing process, including the planning (prewriting), drafting, revising, editing, and publishing (sharing) stages. There is also widespread recognition that a valuable part of the process is conferencing, either between teacher and student, student and student (often referred to as peer feedback), or…

Comprehensive assessment of the L-lysine production process from fermentation of sugarcane molasses.

PubMed

Anaya-Reza, Omar; Lopez-Arenas, Teresa

2017-07-01

L-Lysine is an essential amino acid that can be produced by chemical processes from fossil raw materials, as well as by microbial fermentation, the latter being a more efficient and environmentally friendly procedure. In this work, the production process of L-lysine-HCl is studied using a systematic approach based on modeling and simulation, which supports decision making in the early stage of process design. The study considers two analysis stages: first, the dynamic analysis of the fermentation reactor, where the conversion of sugars from sugarcane molasses to L-lysine with a strain of Corynebacterium glutamicum is carried out. In this stage, the operation mode (either batch or fed batch) and operating conditions of the fermentation reactor are defined to reach the maximum technical criteria. Afterwards, the second analysis stage relates to the industrial production process of L-lysine-HCl, where the fermentation reactor, upstream processing, and downstream processing are included. In this stage, the influence of key parameters on the overall process performance is scrutinized through the evaluation of several technical, economic, and environmental criteria, to determine a profitable and sustainable design of the L-lysine production process. The main results show how the operating conditions, process design, and selection of evaluation criteria can influence in the conceptual design. The best plant design shows maximum product yield (0.31 g L-lysine/g glucose) and productivity (1.99 g/L/h), achieving 26.5% return on investment (ROI) with a payback period (PBP) of 3.8 years, decreasing water and energy consumption, and with a low potential environmental impact (PEI) index.

Relationship between early and late stages of information processing: an event-related potential study

PubMed Central

Portella, Claudio; Machado, Sergio; Arias-Carrión, Oscar; Sack, Alexander T.; Silva, Julio Guilherme; Orsini, Marco; Leite, Marco Antonio Araujo; Silva, Adriana Cardoso; Nardi, Antonio E.; Cagy, Mauricio; Piedade, Roberto; Ribeiro, Pedro

2012-01-01

The brain is capable of elaborating and executing different stages of information processing. However, exactly how these stages are processed in the brain remains largely unknown. This study aimed to analyze the possible correlation between early and late stages of information processing by assessing the latency to, and amplitude of, early and late event-related potential (ERP) components, including P200, N200, premotor potential (PMP) and P300, in healthy participants in the context of a visual oddball paradigm. We found a moderate positive correlation among the latency of P200 (electrode O2), N200 (electrode O2), PMP (electrode C3), P300 (electrode PZ) and the reaction time (RT). In addition, moderate negative correlation between the amplitude of P200 and the latencies of N200 (electrode O2), PMP (electrode C3), P300 (electrode PZ) was found. Therefore, we propose that if the secondary processing of visual input (P200 latency) occurs faster, the following will also happen sooner: discrimination and classification process of this input (N200 latency), motor response processing (PMP latency), reorganization of attention and working memory update (P300 latency), and RT. N200, PMP, and P300 latencies are also anticipated when higher activation level of occipital areas involved in the secondary processing of visual input rise (P200 amplitude). PMID:23355929

Hanford Spent Nuclear Fuel Project recommended path forward

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulton, J.C.

The Spent Nuclear Fuel Project (the Project), in conjunction with the U.S. Department of Energy-commissioned Independent Technical Assessment (ITA) team, has developed engineered alternatives for expedited removal of spent nuclear fuel, including sludge, from the K Basins at Hanford. These alternatives, along with a foreign processing alternative offered by British Nuclear Fuels Limited (BNFL), were extensively reviewed and evaluated. Based on these evaluations, a Westinghouse Hanford Company (WHC) Recommended Path Forward for K Basins spent nuclear fuel has been developed and is presented in Volume I of this document. The recommendation constitutes an aggressive series of projects to construct andmore » operate systems and facilities to safely retrieve, package, transport, process, and store K Basins fuel and sludge. The overall processing and storage scheme is based on the ITA team`s proposed passivation and vault storage process. A dual purpose staging and vault storage facility provides an innovative feature which allows accelerated removal of fuel and sludge from the basins and minimizes programmatic risks beyond any of the originally proposed alternatives. The projects fit within a regulatory and National Environmental Policy Act (NEPA) overlay which mandates a two-phased approach to construction and operation of the needed facilities. The two-phase strategy packages and moves K Basins fuel and sludge to a newly constructed Staging and Storage Facility by the year 2000 where it is staged for processing. When an adjoining facility is constructed, the fuel is cycled through a stabilization process and returned to the Staging and Storage Facility for dry interim (40-year) storage. The estimated total expenditure for this Recommended Path Forward, including necessary new construction, operations, and deactivation of Project facilities through 2012, is approximately $1,150 million (unescalated).« less

A Descriptive Study of Decision-Making Conversations during Pediatric Intensive Care Unit Family Conferences.

PubMed

Smith, Michael A; Clayman, Marla L; Frader, Joel; Arenson, Melanie; Haber-Barker, Natalie; Ryan, Claire; Emanuel, Linda; Michelson, Kelly

2018-06-19

Little is known about how decision-making conversations occur during pediatric intensive care unit (PICU) family conferences (FCs). Describe the decision-making process and implementation of shared decision making (SDM) during PICU FCs. Observational study. University-based tertiary care PICU, including 31 parents and 94 PICU healthcare professionals involved in FCs. We recorded, transcribed, and analyzed 14 PICU FCs involving decision-making discussions. We used a modified grounded theory and content analysis approach to explore the use of traditionally described stages of decision making (DM) (information exchange, deliberation, and determining a plan). We also identified the presence or absence of predefined SDM elements. DM involved the following modified stages: information exchange; information-oriented deliberation; plan-oriented deliberation; and determining a plan. Conversations progressed through stages in a nonlinear manner. For the main decision discussed, all conferences included a presentation of the clinical issues, treatment alternatives, and uncertainty. A minority of FCs included assessing the family's understanding (21%), assessing the family's need for input from others (28%), exploring the family's desired decision-making role (35%), and eliciting the family's opinion (42%). In the FCs studied, we found that DM is a nonlinear process. We also found that several SDM elements that could provide information about parents' perspectives and needs did not always occur, identifying areas for process improvement.

Two stage fluid bed-plasma gasification process for solid waste valorisation: Technical review and preliminary thermodynamic modelling of sulphur emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrin, Shane, E-mail: shane.morrin@ucl.ac.uk; Advanced Plasma Power, South Marston Business park, Swindon, SN3 4DE; Lettieri, Paola, E-mail: p.lettieri@ucl.ac.uk

2012-04-15

Highlights: Black-Right-Pointing-Pointer We investigate sulphur during MSW gasification within a fluid bed-plasma process. Black-Right-Pointing-Pointer We review the literature on the feed, sulphur and process principles therein. Black-Right-Pointing-Pointer The need for research in this area was identified. Black-Right-Pointing-Pointer We perform thermodynamic modelling of the fluid bed stage. Black-Right-Pointing-Pointer Initial findings indicate the prominence of solid phase sulphur. - Abstract: Gasification of solid waste for energy has significant potential given an abundant feed supply and strong policy drivers. Nonetheless, significant ambiguities in the knowledge base are apparent. Consequently this study investigates sulphur mechanisms within a novel two stage fluid bed-plasma gasification process.more » This paper includes a detailed review of gasification and plasma fundamentals in relation to the specific process, along with insight on MSW based feedstock properties and sulphur pollutant therein. As a first step to understanding sulphur partitioning and speciation within the process, thermodynamic modelling of the fluid bed stage has been performed. Preliminary findings, supported by plant experience, indicate the prominence of solid phase sulphur species (as opposed to H{sub 2}S) - Na and K based species in particular. Work is underway to further investigate and validate this.« less

Coupling effect and control strategies of the maglev dual-stage inertially stabilization system based on frequency-domain analysis.

PubMed

Lin, Zhuchong; Liu, Kun; Zhang, Li; Zeng, Delin

2016-09-01

Maglev dual-stage inertially stabilization (MDIS) system is a newly proposed system which combines a conventional two-axis gimbal assembly and a 5-DOF (degree of freedom) magnetic bearing with vernier tilting capacity to perform dual-stage stabilization for the LOS of the suspended optical instrument. Compared with traditional dual-stage system, maglev dual-stage system exhibits different characteristics due to the negative position stiffness of the magnetic forces, which introduces additional coupling in the dual stage control system. In this paper, the coupling effect on the system performance is addressed based on frequency-domain analysis, including disturbance rejection, fine stage saturation and coarse stage structural resonance suppression. The difference between various control strategies is also discussed, including pile-up(PU), stabilize-follow (SF) and stabilize-compensate (SC). A number of principles for the design of a maglev dual stage system are proposed. A general process is also suggested, which leads to a cost-effective design striking a balance between high performance and complexity. At last, a simulation example is presented to illustrate the arguments in the paper. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

The Process of People Gold Mining in Paningkaban Village Banyumas Indonesia

NASA Astrophysics Data System (ADS)

Muslihudin; Bambang, Azis Nur; Hendarto, Eko; Putranto, Thomas Triadi

2018-02-01

Gold mining in Paningkaban Banyumas conducted by the community is called the People gold mining. At the beginning, many miners from outside the region have involved and transferred of method, technic and knowledge about gold mining to local people. The aim of the study is to identify the existing process of public gold mining. The method of the study is qualitative by using observation and interview. The result showed that the mining process are: 1. Determining the location of mining well; in this determination there are two references; rational and intuition 2. Mining; at this stage, a deep well is drawn about 50-100 meters that leads vertically and horizontally. It is the most high-risk stage because of work accidents that occurred and potentially environment destruction. 3. Pulverization; this stage is classified as the lowest level of difficulty and risk, therefore in this work many woman included. 4. Rolling; in this stage involves enough technology, electrical mechanic and energy with the dynamo and using mercury that potentially contaminate environment. 5. Filtering; this stage is a quite risky because the workers contact directly with mercury. 6. Burning; is the shortest process to separate mercury with gold grains. 7. Sales to local buyer guided by the international gold market in every Thursday.

Identifying risk event in Indonesian fresh meat supply chain

NASA Astrophysics Data System (ADS)

Wahyuni, H. C.; Vanany, I.; Ciptomulyono, U.

2018-04-01

The aim of this paper is to identify risk issues in Indonesian fresh meat supply chain from the farm until to the “plate”. The critical points for food safety in physical fresh meat product flow are also identified. The paper employed one case study in the Indonesian fresh meat company by conducting observations and in-depth three stages of interviews. At the first interview, the players, process, and activities in the fresh meat industry were identified. In the second interview, critical points for food safety were recognized. The risk events in each player and process were identified in the last interview. The research will be conducted in three stages, but this article focuses on risk identification process (first stage) only. The second stage is measuring risk and the third stage focuses on determining the value of risk priority. The results showed that there were four players in the fresh meat supply chain: livestock (source), slaughter (make), distributor and retail (deliver). Each player has different activities and identified 16 risk events in the fresh meat supply chain. Some of the strategies that can be used to reduce the occurrence of such risks include improving the ability of laborers on food safety systems, improving cutting equipment and distribution processes

Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins

NASA Astrophysics Data System (ADS)

Martin, Ffion A.; Warrior, Nicholas A.; Simacek, Pavel; Advani, Suresh; Hughes, Adrian; Darlington, Roger; Senan, Eissa

2018-03-01

Very short manufacture cycle times are required if continuous carbon fibre and epoxy composite components are to be economically viable solutions for high volume composite production for the automotive industry. Here, a manufacturing process variant of resin transfer moulding (RTM), targets a reduction of in-mould manufacture time by reducing the time to inject and cure components. The process involves two stages; resin injection followed by compression. A flow simulation methodology using an RTM solver for the process has been developed. This paper compares the simulation prediction to experiments performed using industrial equipment. The issues encountered during the manufacturing are included in the simulation and their sensitivity to the process is explored.

A Study of Social Work Students' Knowledge and Perceptions of Stages of Latino Immigration

ERIC Educational Resources Information Center

Held, Mary Lehman; Cuellar, Matthew J.; Cook Heffron, Laurie

2018-01-01

Latino immigrants encounter distinct hardships at each stage of the immigration process, including stressors that occur in the home countries, during travel, and on settlement, which correspond with poorer mental health status. Yet, much of social work education and service delivery centers only on postsettlement needs. This exploratory study…

Performance improvement of a centrifugal compressor stage by using different vaned diffusers

NASA Astrophysics Data System (ADS)

Zhang, Y. C.; Kong, X. Z.; Li, F.; Sun, W.; Chen, Q. G.

2013-12-01

The vaneless diffuser (VLD) is usually adopted in the traditional design of the multi-stage centrifugal compressor because of the stage's match problem. The drawback of the stage with vaneless diffusers is low efficiency. In order to increase the efficiency and at the same time, induce no significant decline in the operating range of the stage, three different types of vaned diffusers are designed and numerically investigated: the traditional vaned diffuser (TVD), the low-solidity cascade diffuser (LSD) and the partial-height vane diffuser (PVD). These three types of vaned diffusers have different influences on the performance of the centrifugal compressor. In the present investigation, the first part investigates the performance of a centrifugal compressor stage with three different vaned diffusers. The second part studies the influences of the height and the position of partial height vanes on the stage performance, and discusses the matching problem between the PVD and the downstream return channel. The stage investigated in this paper includes the impeller, the diffuser, the bend and the return channel. In the process of numerical investigation, the flow is assumed to be steady, and this process includes calculation and simulation. The calculation of 3-D turbulent flow in the stage uses the commercial CFD code NUMECA together with the Spalart-Allmaras turbulence model. The simulation of the computational region includes the impeller passages, the diffuser passages and return channel passages. The structure and surrounding region are assumed to have a perfect cyclic symmetry, so the single channel model and periodic boundary condition are applied at the middle of the passage, that is to reduce the calculation region to only one region. The investigation showed that the low-solidity cascade diffuser would be a better choice as a middle course for the first stage of the multistage centrifugal compressor. Besides, the influences of the height and the position of partial height vanes on the stage performance are intensively investigated and concluded at the design point, the isentropic efficiency and the static pressure ratio of the stage are improved with the increasing of the partial vane's height, and that installing the half-height vanes on the shroud side the stage would obtain a more uniform diffuser outflow and a better aerodynamic performance.

Media Screening for Obtaining Haematococcus pluvialis Red Motile Macrozooids Rich in Astaxanthin and Fatty Acids

PubMed Central

Butler, Thomas O.; McDougall, Gordon J.; Campbell, Raymond; Stanley, Michele S.; Day, John G.

2017-01-01

Astaxanthin from Haematococcus pluvialis is commercially produced in a two-stage process, involving green vegetative (macrozooid) and red aplanospore stages. This approach has been scaled up to an industrial process but constraints limit its commercial success and profitability, including: contamination issues, high pigment extraction costs, requirements for high light levels and photo-bleaching in the red stage. However, in addition to the aplanospore stage, this alga can produce astaxanthin in vegetative palmelloid and motile macrozooid cells. In this study, a two-stage process utilising different media in the green stage, with subsequent re-suspension in medium without nitrate was employed to optimise the formation of red motile macrozooids. Optimal growth in the green phase was obtained on cultivation under mixotrophic conditions in EG:JM media followed by re-suspension in medium without nitrate resulting in red motile macrozooids with an astaxanthin content of 2.74% (78.4% of total carotenoids) and a lipid content of 35.3% (rich in unsaturated fatty acids. It is envisaged that the red motile macrozooids could be harvested and fed as a whole-cell product directly in the animal feed and aquaculture sectors, or used as a blend of carotenoids and polyunsaturated fatty acids (PUFAs) in nutraceutical products. PMID:29278377

Media Screening for Obtaining Haematococcus pluvialis Red Motile Macrozooids Rich in Astaxanthin and Fatty Acids.

PubMed

Butler, Thomas O; McDougall, Gordon J; Campbell, Raymond; Stanley, Michele S; Day, John G

2017-12-26

Astaxanthin from Haematococcus pluvialis is commercially produced in a two-stage process, involving green vegetative (macrozooid) and red aplanospore stages. This approach has been scaled up to an industrial process but constraints limit its commercial success and profitability, including: contamination issues, high pigment extraction costs, requirements for high light levels and photo-bleaching in the red stage. However, in addition to the aplanospore stage, this alga can produce astaxanthin in vegetative palmelloid and motile macrozooid cells. In this study, a two-stage process utilising different media in the green stage, with subsequent re-suspension in medium without nitrate was employed to optimise the formation of red motile macrozooids. Optimal growth in the green phase was obtained on cultivation under mixotrophic conditions in EG:JM media followed by re-suspension in medium without nitrate resulting in red motile macrozooids with an astaxanthin content of 2.74% (78.4% of total carotenoids) and a lipid content of 35.3% (rich in unsaturated fatty acids. It is envisaged that the red motile macrozooids could be harvested and fed as a whole-cell product directly in the animal feed and aquaculture sectors, or used as a blend of carotenoids and polyunsaturated fatty acids (PUFAs) in nutraceutical products.

Neural Network Modeling for Gallium Arsenide IC Fabrication Process and Device Characteristics.

NASA Astrophysics Data System (ADS)

Creech, Gregory Lee, I.

This dissertation presents research focused on the utilization of neurocomputing technology to achieve enhanced yield and effective yield prediction in integrated circuit (IC) manufacturing. Artificial neural networks are employed to model complex relationships between material and device characteristics at critical stages of the semiconductor fabrication process. Whole wafer testing was performed on the starting substrate material and during wafer processing at four critical steps: Ohmic or Post-Contact, Post-Recess, Post-Gate and Final, i.e., at completion of fabrication. Measurements taken and subsequently used in modeling include, among others, doping concentrations, layer thicknesses, planar geometries, layer-to-layer alignments, resistivities, device voltages, and currents. The neural network architecture used in this research is the multilayer perceptron neural network (MLPNN). The MLPNN is trained in the supervised mode using the generalized delta learning rule. It has one hidden layer and uses continuous perceptrons. The research focuses on a number of different aspects. First is the development of inter-process stage models. Intermediate process stage models are created in a progressive fashion. Measurements of material and process/device characteristics taken at a specific processing stage and any previous stages are used as input to the model of the next processing stage characteristics. As the wafer moves through the fabrication process, measurements taken at all previous processing stages are used as input to each subsequent process stage model. Secondly, the development of neural network models for the estimation of IC parametric yield is demonstrated. Measurements of material and/or device characteristics taken at earlier fabrication stages are used to develop models of the final DC parameters. These characteristics are computed with the developed models and compared to acceptance windows to estimate the parametric yield. A sensitivity analysis is performed on the models developed during this yield estimation effort. This is accomplished by analyzing the total disturbance of network outputs due to perturbed inputs. When an input characteristic bears no, or little, statistical or deterministic relationship to the output characteristics, it can be removed as an input. Finally, neural network models are developed in the inverse direction. Characteristics measured after the final processing step are used as the input to model critical in-process characteristics. The modeled characteristics are used for whole wafer mapping and its statistical characterization. It is shown that this characterization can be accomplished with minimal in-process testing. The concepts and methodologies used in the development of the neural network models are presented. The modeling results are provided and compared to the actual measured values of each characteristic. An in-depth discussion of these results and ideas for future research are presented.

Nutrition intervention group program based on preaction-stage-oriented change processes of the Transtheoretical Model promotes long-term reduction in dietary fat intake.

PubMed

Finckenor, M; Byrd-Bredbenner, C

2000-03-01

To develop and evaluate the long-term effectiveness of an intervention program, based on preaction-stage-oriented change processes of the Transtheoretical Model of Behavior Change, that could be delivered in a group setting to help participants lower dietary fat intake. An enhanced version of the nonequivalent control group experimental design was used. Entire sections of an undergraduate introductory nutrition science course were assigned to an experimental, pretest/posttest control, or posttest-only control group. Daily fat intake and stage of change of the experimental and pretest/posttest control groups were determined at the pretest and posttest and 1-year later at a follow-up test. Every 1 to 2 weeks during the study, stage of change of the experimental group was assessed. Daily fat intake of the experimental group was assessed at study midpoint. Daily fat intake and stage of change of the posttest-only control group was determined at the posttest. Pretest results were used to place participants of the experimental and pretest/posttest control groups in either the preaction stage (i.e., precontemplation, contemplation, or preparation) or the action/maintenance stage. The sample consisted of 38, 30, and 42 undergraduate students who were assigned to the experimental, pretest/posttest control, and posttest-only control groups, respectively. The experimental group participated in a group-based, dietary fat intake intervention that included a series of 11 lessons taught over a 14-week period. Each lesson was based on 1 or 2 of the preaction-stage-oriented change processes of the Transtheoretical Model. Data were evaluated to determine the effects of the intervention program on long-term dietary fat reduction and stage of change progression. Analysis of variance, repeated-measures analysis of variance, and paired t tests. For pretest and posttest dietary fat intake scores, stage and time were significant, and there was a significant time-by-stage interaction. Time was significant for pretest and posttest stage scores. Subjects in the preaction-stage experimental group significantly increased their mean stage of change and reduced their fat intake between the pretest and posttest; these changes persisted for 1 year. Pretest/posttest control group participants who began in a preaction stage also significantly increased their mean stage and reduced fat intake by the posttest, but these changes did not endure until the follow-up test. This intervention program produced an enduring, significant reduction in mean dietary fat consumption and a significant progression in mean stage of change of subjects in the experimental group who were in the preaction stage. It may be appropriate to design group interventions to use preaction stage processes rather than the more traditionally used action and maintenance stages change processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report compares the energy use, oil use and emissions of electric vehicles (EVs) with those of conventional, gasoline- powered vehicles (CVs) over the total life cycle of the vehicles. The various stages included in the vehicles` life cycles include vehicle manufacture, fuel production, and vehicle operation. Disposal is not included. An inventory of the air emissions associated with each stage of the life cycle is estimated. Water pollutants and solid wastes are reported for individual processes, but no comprehensive inventory is developed. Volume II contains additional details on the vehicle, utility, and materials analyses and discusses several details ofmore » the methodology.« less

Validating commercial remote sensing and spatial information (CRS&SI) technologies for streamlining environmental and planning processes in transportation projects.

DOT National Transportation Integrated Search

2010-03-01

Transportation corridor-planning processes are well understood, and consensus exists among practitioners : about common practices for stages and tasks included in traditional EIS approaches. However, traditional approaches do : not typically employ f...

Willing to wait: Elevated reward-processing EEG activity associated with a greater preference for larger-but-delayed rewards.

PubMed

Pornpattananangkul, Narun; Nusslock, Robin

2016-10-01

While almost everyone discounts the value of future rewards over immediate rewards, people differ in their so-called delay-discounting. One of the several factors that may explain individual differences in delay-discounting is reward-processing. To study individual-differences in reward-processing, however, one needs to consider the heterogeneity of neural-activity at each reward-processing stage. Here using EEG, we separated reward-related neural activity into distinct reward-anticipation and reward-outcome stages using time-frequency characteristics. Thirty-seven individuals first completed a behavioral delay-discounting task. Then reward-processing EEG activity was assessed using a separate reward-learning task, called a reward time-estimation task. During this EEG task, participants were instructed to estimate time duration and were provided performance feedback on a trial-by-trial basis. Participants received monetary-reward for accurate-performance on Reward trials, but not on No-Reward trials. Reward trials, relative to No-Reward trials, enhanced EEG activity during both reward-anticipation (including, cued-locked delta power during cue-evaluation and pre-feedback alpha suppression during feedback-anticipation) and reward-outcome (including, feedback-locked delta, theta and beta power) stages. Moreover, all of these EEG indices correlated with behavioral performance in the time-estimation task, suggesting their essential roles in learning and adjusting performance to maximize winnings in a reward-learning situation. Importantly, enhanced EEG power during Reward trials, as reflected by stronger 1) pre-feedback alpha suppression, 2) feedback-locked theta and 3) feedback-locked beta, was associated with a greater preference for larger-but-delayed rewards in a separate, behavioral delay-discounting task. Results highlight the association between a stronger preference toward larger-but-delayed rewards and enhanced reward-processing. Moreover, our reward-processing EEG indices detail the specific stages of reward-processing where these associations occur. Copyright © 2016 Elsevier Ltd. All rights reserved.

30 CFR 251.12 - Submission, inspection, and selection of geophysical data and information collected under a...

Code of Federal Regulations, 2010 CFR

2010-07-01

... information, and interpreted geophysical information including, but not limited to, shallow and deep subbottom...) You must notify the Regional Director, in writing, when you complete the initial processing and interpretation of any geophysical data and information. Initial processing is the stage of processing where the...

Process for the synthesis of aliphatic alcohol-containing mixtures

DOEpatents

Greene, Marvin I.; Gelbein, Abraham P.

1984-01-01

A process for the synthesis of mixtures which include saturated aliphatic alcohols is disclosed. In the first step of the process, the first catalyst activation stage, a catalyst, which comprises the oxides of copper, zinc, aluminum, potassium and one or two additional metals selected from the group consisting of chromium, magnesium, cerium, cobalt, thorium and lanthanum, is partially activated. In this step, a reducing gas stream, which includes hydrogen and at least one inert gas, flows past the catalyst at a space velocity of up to 5,000 liters (STP) per hour, per kilogram of catalyst. The partially activated catalyst is then subjected to the second step of the process, second-stage catalyst activation. In this step, the catalyst is contacted by an activation gas stream comprising hydrogen and carbon monoxide present in a volume ratio of 0.5:1 and 4:1, respectively, at a temperature of 200.degree. to 450.degree. C. and a pressure of between 35 and 200 atmospheres. The activation gas flows at a space velocity of from 1,000 to 20,000 liters (STP) per hour, per kilogram of catalyst. Second-stage activation continues until the catalyst is contacted with at least 500,000 liters (STP) of activation gas per kilogram of catalyst. The fully activated catalyst, in the third step of the process, contacts a synthesis gas stream comprising hydrogen and carbon monoxide.

Process for the synthesis of aliphatic alcohol-containing mixtures

DOEpatents

Greene, M.I.; Gelbein, A.P.

1984-10-16

A process for the synthesis of mixtures which include saturated aliphatic alcohols is disclosed. In the first step of the process, the first catalyst activation stage, a catalyst, which comprises the oxides of copper, zinc, aluminum, potassium and one or two additional metals selected from the group consisting of chromium, magnesium, cerium, cobalt, thorium and lanthanum, is partially activated. In this step, a reducing gas stream, which includes hydrogen and at least one inert gas, flows past the catalyst at a space velocity of up to 5,000 liters (STP) per hour, per kilogram of catalyst. The partially activated catalyst is then subjected to the second step of the process, second-stage catalyst activation. In this step, the catalyst is contacted by an activation gas stream comprising hydrogen and carbon monoxide present in a volume ratio of 0.5:1 and 4:1, respectively, at a temperature of 200 to 450 C and a pressure of between 35 and 200 atmospheres. The activation gas flows at a space velocity of from 1,000 to 20,000 liters (STP) per hour, per kilogram of catalyst. Second-stage activation continues until the catalyst is contacted with at least 500,000 liters (STP) of activation gas per kilogram of catalyst. The fully activated catalyst, in the third step of the process, contacts a synthesis gas stream comprising hydrogen and carbon monoxide.

Psychiatric Discharge Process

PubMed Central

Alghzawi, Hamzah M.

2012-01-01

Background. Integration of research evidence into clinical nursing practice is essential for the delivery of high-quality nursing care. Discharge planning is an essential process in psychiatric nursing field, in order to prevent recurrent readmission to psychiatric units. Objective. The purpose of this paper is to perform literature overview on psychiatric discharge planning, in order to develop evidence-based practice guideline of psychiatric discharge plan. Methods. A search of electronic databases was conducted. The search process aimed to locate different levels of evidence. Inclusion criteria were studies including outcomes related to prevention of readmission as stability in the community, studies investigating the discharge planning process in acute psychiatric wards, and studies that included factors that impede discharge planning and factors that aid timely discharge. On the other hand, exclusion criteria were studies in which discharge planning was discussed as part of a multi faceted intervention and was not the main focus of the review. Result. Studies met inclusion criteria were mainly literature reviews, consensus statements, and descriptive studies. All of these studies are considered at the lower levels of evidence. Conclusion. This review demonstrated that discharge planning based on general principles (evidence based principles) should be applied during psychiatric discharge planning to make this discharge more effective. Depending on this review, it could be concluded that effective discharge planning includes main three stages; initial discharge meeting, regular discharge meeting(s), and leaving from hospital and discharge day. Each stage of them has requirements should be accomplished be go to the next stage. PMID:23762767

Process for control of pollutants generated during coal gasification

DOEpatents

Frumerman, Robert; Hooper, Harold M.

1979-01-01

The present invention is directed to an improvement in the coal gasification process that effectively eliminates substantially all of the environmental pollutants contained in the producer gas. The raw producer gas is passed through a two-stage water scrubbing arrangement with the tars being condensed essentially water-free in the first stage and lower boiling condensables, including pollutant laden water, being removed in the second stage. The pollutant-laden water is introduced into an evaporator in which about 95 percent of the water is vaporized and introduced as steam into the gas producer. The condensed tars are combusted and the resulting products of combustion are admixed with the pollutant-containing water residue from the evaporator and introduced into the gas producer.

Model-based software process improvement

NASA Technical Reports Server (NTRS)

Zettervall, Brenda T.

1994-01-01

The activities of a field test site for the Software Engineering Institute's software process definition project are discussed. Products tested included the improvement model itself, descriptive modeling techniques, the CMM level 2 framework document, and the use of process definition guidelines and templates. The software process improvement model represents a five stage cyclic approach for organizational process improvement. The cycles consist of the initiating, diagnosing, establishing, acting, and leveraging phases.

Study on HOPE Management Mode of Coal Enterprises Based on Systematic Thinking

NASA Astrophysics Data System (ADS)

Zhaoran, Zhang; Tianzhu, Zhang; Wenjing, Tong

2018-02-01

The extensive management mode of coal enterprises is no longer applicable to the demand of enterprise development under the new economic situation. Combined with the characteristics of coal mine production, based on the system of thinking, integration of lean, people, comprehensive, job management theory, formed HOPE management model, including a core system and three support systems and 18 elements. There are three stages in the development and implementation of this model. To 6S site management for the initial stage to job process reengineering for the intermediate stage to post value process control for the advanced stage. The successful implementation of HOPE model in coal enterprises needs comprehensive control from five aspects: lean culture construction, flattening organizational structure, cost control system, performance appraisal system and lean information management platform. HOPE model can be implemented smoothly and make “win-win” between enterprises and employees.

Toward a Neural Chronometry for the Aesthetic Experience of Music

PubMed Central

Brattico, Elvira; Bogert, Brigitte; Jacobsen, Thomas

2013-01-01

Music is often studied as a cognitive domain alongside language. The emotional aspects of music have also been shown to be important, but views on their nature diverge. For instance, the specific emotions that music induces and how they relate to emotional expression are still under debate. Here we propose a mental and neural chronometry of the aesthetic experience of music initiated and mediated by external and internal contexts such as intentionality, background mood, attention, and expertise. The initial stages necessary for an aesthetic experience of music are feature analysis, integration across modalities, and cognitive processing on the basis of long-term knowledge. These stages are common to individuals belonging to the same musical culture. The initial emotional reactions to music include the startle reflex, core “liking,” and arousal. Subsequently, discrete emotions are perceived and induced. Presumably somatomotor processes synchronizing the body with the music also come into play here. The subsequent stages, in which cognitive, affective, and decisional processes intermingle, require controlled cross-modal neural processes to result in aesthetic emotions, aesthetic judgments, and conscious liking. These latter aesthetic stages often require attention, intentionality, and expertise for their full actualization. PMID:23641223

High speed preamplifier circuit, detection electronics, and radiation detection systems therefrom

DOEpatents

Riedel, Richard A [Knoxville, TN; Wintenberg, Alan L [Knoxville, TN; Clonts, Lloyd G [Knoxville, TN; Cooper, Ronald G [Oak Ridge, TN

2010-09-21

A preamplifier circuit for processing a signal provided by a radiation detector includes a transimpedance amplifier coupled to receive a current signal from a detector and generate a voltage signal at its output. A second amplification stage has an input coupled to an output of the transimpedance amplifier for providing an amplified voltage signal. Detector electronics include a preamplifier circuit having a first and second transimpedance amplifier coupled to receive a current signal from a first and second location on a detector, respectively, and generate a first and second voltage signal at respective outputs. A second amplification stage has an input coupled to an output of the transimpedance amplifiers for amplifying the first and said second voltage signals to provide first and second amplified voltage signals. A differential output stage is coupled to the second amplification stage for receiving the first and second amplified voltage signals and providing a pair of outputs from each of the first and second amplified voltage signals. Read out circuitry has an input coupled to receive both of the pair of outputs, the read out circuitry having structure for processing each of the pair of outputs, and providing a single digital output having a time-stamp therefrom.

Radiation detection system

DOEpatents

Riedel, Richard A [Knoxville, TN; Wintenberg, Alan L [Knoxville, TN; Clonts, Lloyd G [Knoxville, TN; Cooper, Ronald G [Oak Ridge, TN

2012-02-14

A preamplifier circuit for processing a signal provided by a radiation detector includes a transimpedance amplifier coupled to receive a current signal from a detector and generate a voltage signal at its output. A second amplification stage has an input coupled to an output of the transimpedance amplifier for providing an amplified voltage signal. Detector electronics include a preamplifier circuit having a first and second transimpedance amplifier coupled to receive a current signal from a first and second location on a detector, respectively, and generate a first and second voltage signal at respective outputs. A second amplification stage has an input coupled to an output of the transimpedance amplifiers for amplifying the first and said second voltage signals to provide first and second amplified voltage signals. A differential output stage is coupled to the second amplification stage for receiving the first and second amplified voltage signals and providing a pair of outputs from each of the first and second amplified voltage signals. Read out circuitry has an input coupled to receive both of the pair of outputs, the read out circuitry having structure for processing each of the pair of outputs, and providing a single digital output having a time-stamp therefrom.

Influence of early attentional modulation on working memory

PubMed Central

Gazzaley, Adam

2011-01-01

It is now established that attention influences working memory (WM) at multiple processing stages. This liaison between attention and WM poses several interesting empirical questions. Notably, does attention impact WM via its influences on early perceptual processing? If so, what are the critical factors at play in this attention-perception-WM interaction. I review recent data from our laboratory utilizing a variety of techniques (electroencephalography (EEG), functional MRI (fMRI) and transcranial magnetic stimulation (TMS)), stimuli (features and complex objects), novel experimental paradigms, and research populations (younger and older adults), which converge to support the conclusion that top-down modulation of visual cortical activity at early perceptual processing stages (100–200 ms after stimulus onset) impacts subsequent WM performance. Factors that affect attentional control at this stage include cognitive load, task practice, perceptual training, and aging. These developments highlight the complex and dynamic relationships among perception, attention, and memory. PMID:21184764

Ares I-X Best Estimated Trajectory Analysis and Results

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; Beck, Roger E.; Starr, Brett R.; Derry, Stephen D.; Brandon, Jay; Olds, Aaron D.

2011-01-01

The Ares I-X trajectory reconstruction produced best estimated trajectories of the flight test vehicle ascent through stage separation, and of the first and upper stage entries after separation. The trajectory reconstruction process combines on-board, ground-based, and atmospheric measurements to produce the trajectory estimates. The Ares I-X vehicle had a number of on-board and ground based sensors that were available, including inertial measurement units, radar, air-data, and weather balloons. However, due to problems with calibrations and/or data, not all of the sensor data were used. The trajectory estimate was generated using an Iterative Extended Kalman Filter algorithm, which is an industry standard processing algorithm for filtering and estimation applications. This paper describes the methodology and results of the trajectory reconstruction process, including flight data preprocessing and input uncertainties, trajectory estimation algorithms, output transformations, and comparisons with preflight predictions.

Ares I-X Best Estimated Trajectory and Comparison with Pre-Flight Predictions

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; Beck, Roger E.; Derry, Stephen D.; Brandon, Jay M.; Starr, Brett R.; Tartabini, Paul V.; Olds, Aaron D.

2011-01-01

The Ares I-X trajectory reconstruction produced best estimated trajectories of the flight test vehicle ascent through stage separation, and of the first and upper stage entries after separation. The trajectory reconstruction process combines on-board, ground-based, and atmospheric measurements to produce the trajectory estimates. The Ares I-X vehicle had a number of on-board and ground based sensors that were available, including inertial measurement units, radar, air- data, and weather balloons. However, due to problems with calibrations and/or data, not all of the sensor data were used. The trajectory estimate was generated using an Iterative Extended Kalman Filter algorithm, which is an industry standard processing algorithm for filtering and estimation applications. This paper describes the methodology and results of the trajectory reconstruction process, including flight data preprocessing and input uncertainties, trajectory estimation algorithms, output transformations, and comparisons with preflight predictions.

The pathway between conflict and reconciliation: coexistence as an evolutionary process.

PubMed

Sluzki, Carlos E

2010-02-01

A normative sequence of six stages is proposed to describe the process of evolution from open conflict to harmonious coexistence, as well at its devolution from the latter to the former. The stages may be termed Confrontation, Truce, Collaboration, Cooperation, Interdependence and Integration. Each of the six stages constitutes an amalgam of practices, narratives and prevalent emotions in a relational "game" that tends to resist change. At the stage of Confrontation, each party assumes that any act of the other is motivated by ill intent, and active hostility prevails. In Truce or Freeze, acts of hostility are curtailed by a real or virtual "neutral zone" controlled by powerful third parties. The dominant emotions are resentment, anger, and mistrust. Collaboration retains some assumptions of ill intent while certain activities in common are carried out. The third party looses visibility, and the dominant emotions include ambivalence. Cooperation entails the assumption of neutral intent of self and other, while activities in common are planned and carried out. Key emotions include cautious compassion for the other. Interdependence is characterized by active involvement in planning toward the common good. The dominant emotions are trust and forgiveness. At the other end of the spectrum, parties at the stage of Integration are actively involved in projects aimed at the common good and each supports the other's growth. The dominant emotions are solidarity and a friendly trust. Movement from one stage to another shares certain characteristics with other complex systems. For professionals aiming to facilitate evolutionary change, whether in interpersonal or in international relations, the systemic cohesion of each stage constitutes the main challenge, and the promise of similar cohesion at the next stage provides the main hope.

More Than the Ten Rational Thinking Processes.

ERIC Educational Resources Information Center

Torrance, E. Paul

1980-01-01

The 10 rational processes (which include recalling and imagining, classifying and generalizing, comparing and evaluating, analyzing and synthesizing, and deducting and inferring) are examined from a cultural and historical perspective, with particular emphasis on the suprarational aspects of creative thinking. A three stage model for facilitating…

How to Conduct Ethnographic Research

ERIC Educational Resources Information Center

Sangasubana, Nisaratana

2011-01-01

The purpose of this paper is to describe the process of conducting ethnographic research. Methodology definition and key characteristics are given. The stages of the research process are described including preparation, data gathering and recording, and analysis. Important issues such as reliability and validity are also discussed.

Cautioning Health-Care Professionals.

PubMed

Stroebe, Margaret; Schut, Henk; Boerner, Kathrin

2017-03-01

Science and practice seem deeply stuck in the so-called stage theory of grief. Health-care professionals continue to "prescribe" stages. Basically, this perspective endorses the idea that bereaved people go through a set pattern of specific reactions over time following the death of a loved one. It has frequently been interpreted prescriptively, as a progression that bereaved persons must follow in order to adapt to loss. It is of paramount importance to assess stage theory, not least in view of the current status of the maladaptive "persistent complex bereavement-related disorder" as a category for further research in DSM-5. We therefore review the status and value of this approach. It has remained hugely influential among researchers as well as practitioners across recent decades, but there has also been forceful opposition. Major concerns include the absence of sound empirical evidence, conceptual clarity, or explanatory potential. It lacks practical utility for the design or allocation of treatment services, and it does not help identification of those at risk or with complications in the grieving process. Most disturbingly, the expectation that bereaved persons will, even should, go through stages of grieving can be harmful to those who do not. Following such lines of reasoning, we argue that stage theory should be discarded by all concerned (including bereaved persons themselves); at best, it should be relegated to the realms of history. There are alternative models that better represent grieving processes. We develop guidelines to enhance such a move beyond the stage approach in both theory and practice.

Cautioning Health-Care Professionals

PubMed Central

Schut, Henk; Boerner, Kathrin

2017-01-01

Science and practice seem deeply stuck in the so-called stage theory of grief. Health-care professionals continue to “prescribe” stages. Basically, this perspective endorses the idea that bereaved people go through a set pattern of specific reactions over time following the death of a loved one. It has frequently been interpreted prescriptively, as a progression that bereaved persons must follow in order to adapt to loss. It is of paramount importance to assess stage theory, not least in view of the current status of the maladaptive “persistent complex bereavement-related disorder” as a category for further research in DSM-5. We therefore review the status and value of this approach. It has remained hugely influential among researchers as well as practitioners across recent decades, but there has also been forceful opposition. Major concerns include the absence of sound empirical evidence, conceptual clarity, or explanatory potential. It lacks practical utility for the design or allocation of treatment services, and it does not help identification of those at risk or with complications in the grieving process. Most disturbingly, the expectation that bereaved persons will, even should, go through stages of grieving can be harmful to those who do not. Following such lines of reasoning, we argue that stage theory should be discarded by all concerned (including bereaved persons themselves); at best, it should be relegated to the realms of history. There are alternative models that better represent grieving processes. We develop guidelines to enhance such a move beyond the stage approach in both theory and practice. PMID:28355991

Assessment of stage of change, decisional balance, self-efficacy, and use of processes of change of low-income parents for increasing servings of fruits and vegetables to preschool-aged children.

PubMed

Hildebrand, Deana A; Betts, Nancy M

2009-01-01

Use the Transtheoretical Model of Behavior Change (TTM) to determine the proportionate stage of change of low-income parents and primary caregivers (PPC) for increasing accessibility, measured as servings served, of fruits and vegetables (FV) to their preschool-aged children and evaluate response differences for theoretical constructs. Cross-sectional, quantitative survey design consisting of staging algorithm, construct scales, and food frequency questionnaire. Rural and urban communities in a southwestern state of the United States. 238 low-income PPC enrolled in federal nutrition education programs were recruited from group nutrition education sessions. Stage of change using a staging algorithm, TTM constructs of processes of change, decisional balance, and self-efficacy measured by multiple-item scales using Likert response, and fruit and vegetable servings served using a food frequency questionnaire. Descriptive analysis, Pearson's chi-square, analyses of variance with Tukey's Honestly Significant Difference post hoc test, and principal component function analysis. Of the surveyed PPC, 43% were in precontemplation/contemplation stages, and 29% were in the preparation stage for increasing FV accessibility (measured by servings served) to their preschool-aged children. PPC in the action/maintenance stages evidenced greater use of behavioral processes and had higher self-efficacy scores compared to PPC in precontemplation/contemplation and preparation stages. Interventions aimed at increasing FV accessibility for preschool-aged children should be tailored to meet PPCs' stage of change. Interventions targeting PPC in precontemplation/contemplation stages should use methods to share ideas for planning meals and snacks to include FV. Interventions for PPC in the preparation stage should aim to build skills in quick preparation of economical FV, address parental role modeling of FV consumption, and encourage goal setting. Learning formats providing social support may prove effective in prevention of behavior relapse for PPC in action/maintenance stages.

Temporal dynamics of reward anticipation in the human brain.

PubMed

Zhang, Yuanyuan; Li, Qi; Wang, Zhao; Liu, Xun; Zheng, Ya

2017-09-01

Reward anticipation is a complex process including cue evaluation, motor preparation, and feedback anticipation. The present study investigated whether these psychological processes were dissociable on neural dynamics in terms of incentive valence and approach motivation. We recorded EEG when participants were performing a monetary incentive delay task, and found a cue-P3 during the cue-evaluation stage, a contingent negative variation (CNV) during the motor-preparation stage, and a stimulus-preceding negativity (SPN) during the feedback-anticipation stage. Critically, both the cue-P3 and SPN exhibited an enhanced sensitivity to gain versus loss anticipation, which was not observed for the CNV. Moreover, both the cue-P3 and SPN, instead of the CNV, for gain anticipation selectively predicted the participants' approach motivation as measured in a following effort expenditure for rewards task, particularly when reward uncertainty was maximal. Together, these results indicate that reward anticipation consists of several sub-stages, each with distinct functional significance, thus providing implications for neuropsychiatric diseases characterized by dysfunction in anticipatory reward processing. Copyright © 2017 Elsevier B.V. All rights reserved.

Investigation on the removal of H2S from microwave pyrolysis of sewage sludge by an integrated two-stage system.

PubMed

Zhang, Jun; Tian, Yu; Yin, Linlin; Zuo, Wei; Gong, Zhenlong; Zhang, Jie

2017-08-01

In this study, an integrated two-stage system, including the in-situ catalytic microwave pyrolysis (ICMP) and subsequent catalytic wet oxidation (CWO) processes, was proposed to remove H 2 S released from microwave-induced pyrolysis of sewage sludge. The emission profile and H 2 S removal from the pyrolysis of raw sewage sludge (SS) and sewage sludge spiked with conditioner CaO (SS-CaO) were investigated. The results showed that CaO played a positive role on sulfur fixation during the pyrolysis process. It was found that SS-CaO (10 wt.%) contributed to about 35% of H 2 S removal at the first stage (ICMP process). Additionally, the CWO process was demonstrated to have promising potential for posttreatment of remaining H 2 S gas. At the Fe 3+ concentration of 30 g/L, the maximum H 2 S removal efficiency of 94.8% was obtained for a single Fe 3+ /Cu 2+ solution. Finally, at the pyrolysis temperature of 800 °C, 99.7% of H 2 S was eliminated by the integrated two-stage system meeting the discharge standard of China. Therefore, the integrated two-stage system of ICMP + CWO may provide a promising strategy to remove H 2 S dramatically for the biomass pyrolysis industry.

CFD-Modeling of the Multistage Gasifier Capacity of 30 KW

NASA Astrophysics Data System (ADS)

Levin, A. A.; Kozlov, A. N.; Svishchev, D. A.; Donskoy, I. G.

2017-11-01

Single-stage fuel gasification processes have been developed and widely studied in Russia and abroad throughout the 20th century. They are fundamental to the creation and design of modern gas generator equipment. Many studies have shown that single-stage gasification process, have already reached the limit of perfection, which was a significant improvement in their performance becomes impossible and unprofitable. The most fully meet modern technical requirements of multistage gasification technology. In the first step of the process, is organized allothermic biomass pyrolysis using heat of exhaust gas and generating power plant. At this stage, the yield of volatile products (gas and tar) of fuel. In the second step, the layer of fuel is, the tar is decomposed by the action of hot air and steam, steam-gas mixture is formed further reacts with the charcoal in the third process stage. The paper presents a model developed by the authors of the multi-stage gasifier for wood chips. The model is made with the use of CFD-modeling software package (COMSOL Multiphisics). To describe the kinetics of wood pyrolysis and gasification of charcoal studies were carried out using a set of simultaneous thermal analysis. For this complex developed original methods of interpretation of measurements, including methods of technical analysis of fuels and determine the parameters of the detailed kinetics and mechanism of pyrolysis.

Expert study to select indicators of the occurrence of emerging mycotoxin hazards.

PubMed

Kandhai, M C; Booij, C J H; Van der Fels-Klerx, H J

2011-01-01

This article describes a Delphi-based expert judgment study aimed at the selection of indicators to identify the occurrence of emerging mycotoxin hazards related to Fusarium spp. in wheat supply chains. A panel of 29 experts from 12 European countries followed a holistic approach to evaluate the most important indicators for different chain stages (growth, transport and storage, and processing) and their relative importance. After three e-mailing rounds, the experts reached consensus on the most important indicators for each of the three stages: wheat growth, transport and storage, and processing. For wheat growth, these indicators include: relative humidity/rainfall, crop rotation, temperature, tillage practice, water activity of the kernels, and crop variety/cultivar. For the transport and storage stage, they include water activity in the kernels, relative humidity, ventilation, temperature, storage capacity, and logistics. For wheat processing, indicators include quality data, fraction of the cereal used, water activity in the kernels, quality management and traceability systems, and carryover of contamination. The indicators selected in this study can be used in an identification system for the occurrence of emerging mycotoxin hazards in wheat supply chains. Such a system can be used by risk managers within governmental (related) organizations and/or the food and feed industry in order to react proactively to the occurrence of these emerging mycotoxins. © 2010 Society for Risk Analysis.

Practical Ideas for Teaching Writing as a Process at the High School and College Levels. 1997 Revised Edition.

ERIC Educational Resources Information Center

Olson, Carol Booth, Comp.

The concept of writing as process has revolutionized the way many view composition, and this book is organized by the stages of that process. Each section begins with a well-known author presenting specific techniques, followed by commentaries which include testimonials, applications of writing techniques, and descriptions of strategy…

Toward a space materials systems program

NASA Technical Reports Server (NTRS)

Vontiesenhausen, G. F.

1981-01-01

A program implementation model is presented which covers the early stages of space material processing and manufacturing. The model includes descriptions of major program elements, development and experiment requirements in space materials processing and manufacturing, and an integration of the model into NASA's long range plans as well as its evolution from present Materials Processing in Space plans.

Experiments with Sensor Motes and Java-DSP

ERIC Educational Resources Information Center

Kwon, Homin; Berisha, V.; Atti, V.; Spanias, A.

2009-01-01

Distributed wireless sensor networks (WSNs) are being proposed for various applications including defense, security, and smart stages. The introduction of hardware wireless sensors in a signal processing education setting can serve as a paradigm for data acquisition, collaborative signal processing, or simply as a platform for obtaining,…

Central Pain Processing in Early-Stage Parkinson's Disease: A Laser Pain fMRI Study

PubMed Central

Petschow, Christine; Scheef, Lukas; Paus, Sebastian; Zimmermann, Nadine; Schild, Hans H.; Klockgether, Thomas; Boecker, Henning

2016-01-01

Background & Objective Pain is a common non-motor symptom in Parkinson’s disease. As dopaminergic dysfunction is suggested to affect intrinsic nociceptive processing, this study was designed to characterize laser-induced pain processing in early-stage Parkinson’s disease patients in the dopaminergic OFF state, using a multimodal experimental approach at behavioral, autonomic, imaging levels. Methods 13 right-handed early-stage Parkinson’s disease patients without cognitive or sensory impairment were investigated OFF medication, along with 13 age-matched healthy control subjects. Measurements included warmth perception thresholds, heat pain thresholds, and central pain processing with event-related functional magnetic resonance imaging (erfMRI) during laser-induced pain stimulation at lower (E = 440 mJ) and higher (E = 640 mJ) target energies. Additionally, electrodermal activity was characterized during delivery of 60 randomized pain stimuli ranging from 440 mJ to 640 mJ, along with evaluation of subjective pain ratings on a visual analogue scale. Results No significant differences in warmth perception thresholds, heat pain thresholds, electrodermal activity and subjective pain ratings were found between Parkinson’s disease patients and controls, and erfMRI revealed a generally comparable activation pattern induced by laser-pain stimuli in brain areas belonging to the central pain matrix. However, relatively reduced deactivation was found in Parkinson’s disease patients in posterior regions of the default mode network, notably the precuneus and the posterior cingulate cortex. Conclusion Our data during pain processing extend previous findings suggesting default mode network dysfunction in Parkinson’s disease. On the other hand, they argue against a genuine pain-specific processing abnormality in early-stage Parkinson’s disease. Future studies are now required using similar multimodal experimental designs to examine pain processing in more advanced stages of Parkinson’s disease. PMID:27776130

Multi-stage FE simulation of hot ring rolling

NASA Astrophysics Data System (ADS)

Wang, C.; Geijselaers, H. J. M.; van den Boogaard, A. H.

2013-05-01

As a unique and important member of the metal forming family, ring rolling provides a cost effective process route to manufacture seamless rings. Applications of ring rolling cover a wide range of products in aerospace, automotive and civil engineering industries [1]. Above the recrystallization temperature of the material, hot ring rolling begins with the upsetting of the billet cut from raw stock. Next a punch pierces the hot upset billet to form a hole through the billet. This billet, referred to as preform, is then rolled by the ring rolling mill. For an accurate simulation of hot ring rolling, it is crucial to include the deformations, stresses and strains from the upsetting and piercing process as initial conditions for the rolling stage. In this work, multi-stage FE simulations of hot ring rolling process were performed by mapping the local deformation state of the workpiece from one step to the next one. The simulations of upsetting and piercing stages were carried out by 2D axisymmetric models using adaptive remeshing and element erosion. The workpiece for the ring rolling stage was subsequently obtained after performing a 2D to 3D mapping. The commercial FE package LS-DYNA was used for the study and user defined subroutines were implemented to complete the control algorithm. The simulation results were analyzed and also compared with those from the single-stage FE model of hot ring rolling.

The Utility of Stage-specific Mid-to-late Drosophila Follicle Isolation

PubMed Central

Spracklen, Andrew J.; Tootle, Tina L.

2013-01-01

Drosophila oogenesis or follicle development has been widely used to advance the understanding of complex developmental and cell biologic processes. This methods paper describes how to isolate mid-to-late stage follicles (Stage 10B-14) and utilize them to provide new insights into the molecular and morphologic events occurring during tight windows of developmental time. Isolated follicles can be used for a variety of experimental techniques, including in vitro development assays, live imaging, mRNA expression analysis and western blot analysis of proteins. Follicles at Stage 10B (S10B) or later will complete development in culture; this allows one to combine genetic or pharmacologic perturbations with in vitro development to define the effects of such manipulations on the processes occurring during specific periods of development. Additionally, because these follicles develop in culture, they are ideally suited for live imaging studies, which often reveal new mechanisms that mediate morphological events. Isolated follicles can also be used for molecular analyses. For example, changes in gene expression that result from genetic perturbations can be defined for specific developmental windows. Additionally, protein level, stability, and/or posttranslational modification state during a particular stage of follicle development can be examined through western blot analyses. Thus, stage-specific isolation of Drosophila follicles provides a rich source of information into widely conserved processes of development and morphogenesis. PMID:24326735

Dental caries and pulpal disease.

PubMed

Zero, Domenick T; Zandona, Andrea Ferreira; Vail, Mychel Macapagal; Spolnik, Kenneth J

2011-01-01

This article reviews the diagnostic process, from the first clinically evident stages of the caries process to development of pulpal pathosis. The caries diagnostic process includes 4 interconnected components-staging caries lesion severity, assessing caries lesion activity, and risk assessments at the patient and tooth surface level - which modify treatment decisions for the patient. Pulpal pathosis is diagnosed as reversible pulpitis, irreversible pulpitis (asymptomatic), irreversible pulpitis (symptomatic), and pulp necrosis. Periapical disease is diagnosed as symptomatic apical periodontitis, asymptomatic apical periodontitis, acute apical abscess, and chronic apical abscess. Ultimately, the goal of any diagnosis should be to achieve better treatment decisions and health outcomes for the patient. Copyright © 2011 Elsevier Inc. All rights reserved.

Ares I Upper Stage Update

NASA Technical Reports Server (NTRS)

Davis, Daniel J.

2010-01-01

These presentation slides review the progress in the development of the Ares I upper stage. The development includes development of a manufacturing and processing assembly that will reduce the time required over 100 days, development of a weld tool that is a robotic tool that is the largest welder of its kind in the United States, development of avionics and software, and development of logisitics and operations systems.

Evaluating implementation of the World Health Organization's Strategic Approach to strengthening sexual and reproductive health policies and programs to address unintended pregnancy and unsafe abortion.

PubMed

Rashid, Shusmita; Moore, Julia E; Timmings, Caitlyn; Vogel, Joshua P; Ganatra, Bela; Khan, Dina N; Sayal, Radha; Metin Gülmezoglu, A; Straus, Sharon E

2017-11-21

We conducted a process evaluation to assess how the World Health Organization's (WHO) Strategic Approach to strengthening sexual and reproductive health policies and programs ("the SA") was used in 15 countries that requested WHO's technical support in addressing unintended pregnancy and unsafe abortion. The SA is a three-stage planning, policy, and program implementation process. We used the social ecological model (SEM) to analyze the contextual factors that influenced SA implementation. We used a two-phased sequential approach to data collection and analysis. In Phase A, we conducted a document and literature review and synthesized data thematically. In Phase B, we conducted interviews with stakeholders who used the SA in the countries of interest. We used a qualitative method triangulation technique to analyze and combine data from both phases to understand how the SA was implemented in each country. Data from 145 documents and 19 interviews described the SA process and activities in each country. All 15 countries completed Stage 1 activities. The activities of Stage 1 determined activities in subsequent stages and varied across countries. Following Stage 1, some countries focused on reforming policies to improve access to sexual and reproductive health (SRH) services whereas others focused on improving provider-level capacity to enhance SRH service quality and improving community-level SRH education. We identified factors across SEM levels that affected SA implementation, including individual- and community-level perceptions of using the SA and the recommendations that emerged from its use, organizational capacity to conduct SA activities, and how well these activities aligned with the existing political climate. Stakeholders perceived SA implementation to be country-driven and systematic in bringing attention to important SRH issues in their countries. We identified key success factors for influencing the individual, organization, and system change required for implementing the SA. These include sustaining stakeholder engagement for all SA stages, monitoring and reporting on activities, and leveraging activities and outputs from each SA stage to obtain technical and financial support for subsequent stages. Results may be used to optimize ongoing implementation efforts to improve access to and the quality of SRH services.

Analog CMOS design for optical coherence tomography signal detection and processing.

PubMed

Xu, Wei; Mathine, David L; Barton, Jennifer K

2008-02-01

A CMOS circuit was designed and fabricated for optical coherence tomography (OCT) signal detection and processing. The circuit includes a photoreceiver, differential gain stage and lock-in amplifier based demodulator. The photoreceiver consists of a CMOS photodetector and low noise differential transimpedance amplifier which converts the optical interference signal into a voltage. The differential gain stage further amplifies the signal. The in-phase and quadrature channels of the lock-in amplifier each include an analog mixer and switched-capacitor low-pass filter with an external mixer reference signal. The interferogram envelope and phase can be extracted with this configuration, enabling Doppler OCT measurements. A sensitivity of -80 dB is achieved with faithful reproduction of the interferometric signal envelope. A sample image of finger tip is presented.

Handbook for Educational Buildings Planning. Educational Building and Equipment 9.

ERIC Educational Resources Information Center

Almeida, Rodolfo

Stages in the educational facility planning process are presented in this handbook, with a second focus on implementation. Four chapters provide information on the four cycles of the planning process, which include analysis and diagnosis, research and development, planning and programming, and implementation and evaluation. Characteristics of an…

Fuel and fuel blending components from biomass derived pyrolysis oil

DOEpatents

McCall, Michael J.; Brandvold, Timothy A.; Elliott, Douglas C.

2012-12-11

A process for the conversion of biomass derived pyrolysis oil to liquid fuel components is presented. The process includes the production of diesel, aviation, and naphtha boiling point range fuels or fuel blending components by two-stage deoxygenation of the pyrolysis oil and separation of the products.

The Cultural Adaptation Process during a Short-Term Study Abroad Experience in Swaziland

ERIC Educational Resources Information Center

Conner, Nathan W.; Roberts, T. Grady

2015-01-01

Globalization continuously shapes our world and influences post-secondary education. This study explored the cultural adaptation process of participants during a short-term study abroad program. Participants experienced stages which included initial feelings, cultural uncertainty, cultural barriers, cultural negativity, academic and career growth,…

Referent Communication in Chronic Schizophrenia

ERIC Educational Resources Information Center

Kantorowitz, David A.; Cohen, Bertram D.

1977-01-01

Thirty chronic schizophrenics (15 process and 15 reactive) and 15 normal control speakers described colors displayed in three-chip sets containing a referent and two nonreferent colors. Concludes that poor communication accuracy in long-term schizophrenics results from failure to include a self-editing stage as a part of the communication process.…

Modeling the Innovation-Decision Process: Dissemination and Adoption of a Motivational Interviewing Preparatory Procedure in Addiction Outpatient Clinics

PubMed Central

Walitzer, Kimberly S.; Dermen, Kurt H.; Barrick, Christopher; Shyhalla, Kathleen

2015-01-01

Widespread adoption of empirically-supported treatment innovations has the potential to improve effectiveness of treatment received by individuals with substance use disorders. However, the process of disseminating such innovations has been complex, slow, and difficult. We empirically describe the dissemination and adoption of a treatment innovation – an alcohol-treatment preparatory therapeutic procedure based on motivational interviewing (MI) – in the context of Rogers’ (2003) five stages of innovation-decision process (knowledge, persuasion, decision, implementation and confirmation). To this end, 145 randomly-chosen outpatient addiction treatment clinics in New York State received an onsite visit from a project trainer delivering one of three randomly-assigned dissemination intensities: a 15-minute, a half-day or a full-day presentation. Across these clinics, 141 primary administrators and 837 clinicians completed questionnaires assessing aspects of five innovation-decision stages. At each clinic, questionnaire administration occurred immediately pre- and post-dissemination, as well as one and six months after dissemination. Consistent with Rogers’ theory, earlier stages of the innovation-decision process predicted later stages. As hypothesized, dissemination intensity predicted clinicians’ post-dissemination knowledge. Clinician baseline characteristics (including gender, pre-dissemination knowledge regarding the MI preparatory technique, education, case load, beliefs regarding the nature of alcohol problems, and beliefs and behavior with regard to therapeutic style) predicted knowledge and persuasion stage variables. One baseline clinic characteristic (i.e., clinic mean beliefs and behavior regarding an MI-consistent therapeutic style) predicted implementation stage variables. Findings suggest that dissemination strategies should accommodate clinician and clinic characteristics. PMID:25934460

Understanding Motivation to Implement Smoking Bans among Mothers with a Hospitalized Infant

PubMed Central

Stotts, Angela L.; Klawans, Michelle R.; Northrup, Thomas F.; Villarreal, Yolanda; Hovell, Melbourne F.

2016-01-01

Objective Secondhand smoke exposure (SHSe) poses risks to hospitalized children upon discharge and no uniformly effective interventions have been identified. Understanding change-related processes and social-contextual factors related to motivation for implementing home and car smoking bans may inform interventions to reduce infant SHSe among mothers with a hospitalized infant. Methods In this cross-sectional, secondary analysis, mothers of neonatal ICU infants who reported smoking or living with a smoker (N=205) were assigned to stages of change (pre-contemplation, contemplation, preparation, or action) based on behaviors and intentions for establishing smoking bans in their homes and cars. Processes of change (POC) for SHSe reduction practices, self-efficacy, depressive symptoms, generalized anxiety, and social support for not smoking in the home were examined across all four stages. Results The majority of mothers were in the action stage for having a home smoking ban in place (55%); only 35% of participants were in action for a car smoking ban. POC use differed across the stages of change for having a home ban (p=0.004) and car ban (p=0.02), with earlier stages using fewer overall and relatively fewer cognitive/affective processes. Earlier stage women also reported lower self-efficacy to change, less familial and partner support for in-home smoking bans, and more depressive symptoms. Conclusions Novel intervention targets were identified, including cognitive/affective change processes, mental health, and familial/social contingencies for implementing SHSe protective practices. Creative ways in which to affect change at the individual and household level are needed in order to fully address the complexity of child SHSe. PMID:26914262

Framework for Multidisciplinary Analysis, Design, and Optimization with High-Fidelity Analysis Tools

NASA Technical Reports Server (NTRS)

Orr, Stanley A.; Narducci, Robert P.

2009-01-01

A plan is presented for the development of a high fidelity multidisciplinary optimization process for rotorcraft. The plan formulates individual disciplinary design problems, identifies practical high-fidelity tools and processes that can be incorporated in an automated optimization environment, and establishes statements of the multidisciplinary design problem including objectives, constraints, design variables, and cross-disciplinary dependencies. Five key disciplinary areas are selected in the development plan. These are rotor aerodynamics, rotor structures and dynamics, fuselage aerodynamics, fuselage structures, and propulsion / drive system. Flying qualities and noise are included as ancillary areas. Consistency across engineering disciplines is maintained with a central geometry engine that supports all multidisciplinary analysis. The multidisciplinary optimization process targets the preliminary design cycle where gross elements of the helicopter have been defined. These might include number of rotors and rotor configuration (tandem, coaxial, etc.). It is at this stage that sufficient configuration information is defined to perform high-fidelity analysis. At the same time there is enough design freedom to influence a design. The rotorcraft multidisciplinary optimization tool is built and substantiated throughout its development cycle in a staged approach by incorporating disciplines sequentially.

Iterative Design and Testing for the Development of a Game-Based Chlamydia Awareness Intervention: A Pilot Study.

PubMed

Jiang, Rui; McKanna, James; Calabrese, Samantha; Seif El-Nasr, Magy

2017-08-01

Herein we describe a methodology for developing a game-based intervention to raise awareness of Chlamydia and other sexually transmitted infections among youth in Boston's underserved communities. We engaged in three design-based experiments. These utilized mixed methods, including playtesting and assessment methods, to examine the overall effectiveness of the game. In this case, effectiveness is defined as (1) engaging the target group, (2) increasing knowledge about Chlamydia, and (3) changing attitudes toward Chlamydia testing. These three experiments were performed using participants from different communities and with slightly different versions of the game, as we iterated through the design/feedback process. Overall, participants who played the game showed a significant increase in participants' knowledge of Chlamydia compared with those in the control group (P = 0.0002). The version of the game, including elements specifically targeting systemic thinking, showed significant improvement in participants' intent to get tested compared with the version of the game without such elements (Stage 2: P > 0.05; Stage 3: P = 0.0045). Furthermore, during both Stage 2 and Stage 3, participants showed high levels of enjoyment, mood, and participation and moderate levels of game engagement and social engagement. During Stage 3, however, participants' game engagement (P = 0.0003), social engagement (P = 0.0003), and participation (P = 0.0003) were significantly higher compared with those of Stage 2. Thus, we believe that motivation improvements from Stage 2 to 3 were also effective. Finally, participants' overall learning effectiveness was correlated with their prepositive affect (r = 0.52) and their postproblem hierarchy (r = -0.54). The game improved considerably from its initial conception through three stages of iterative design and feedback. Our assessment methods for each stage targeted and integrated learning, health, and engagement outcomes. Lessons learned through this iterative design process are a great contribution to the games for health community, especially in targeting the development of health and learning goals through game design.

Field of study variation throughout the college pipeline and its effect on the earnings gap: Differences between ethnic and immigrant groups in Israel.

PubMed

Alon, Sigal

2015-07-01

This study demonstrates the analytical leverage gained from considering the entire college pipeline-including the application, admission and graduation stages-in examining the economic position of various groups upon labor market entry. The findings, based on data from three elite universities in Israel, reveal that the process that shapes economic inequality between different ethnic and immigrant groups is not necessarily cumulative. Field of study stratification does not expand systematically from stage to stage and the position of groups on the field of study hierarchy at each stage is not entirely explained by academic preparation. Differential selection and attrition processes, as well as ambition and aspirations, also shape the position of ethnic groups in the earnings hierarchy and generate a non-cumulative pattern. These findings suggest that a cross-sectional assessment of field of study inequality at the graduation stage can generate misleading conclusions about group-based economic inequality among workers with a bachelor's degree. Copyright © 2015 Elsevier Inc. All rights reserved.

Calcic soils and calcretes in the southwestern United States

USGS Publications Warehouse

Bachman, George Odell; Machette, Michael N.

1977-01-01

Secondary calcium carbonate of diverse origins, 'caliche' of many authors, is widespread in the southwestern United States. 'Caliche' includes various carbonates such as calcic soils and products of groundwater cementation. The term 'caliche' is generally avoided in this report in favor of such terms as calcrete, calcic soils, and pervasively cemented deposits. Criteria for the recognition of various types of calcrete of diverse origins include field relations and laboratory data. Calcic soils provide a comprehensive set of characteristics that aid in their recognition in the field. These characteristics include a distinctive morphology that is zoned horizontally and can frequently be traced over tens to hundreds of square kilometers. The major process in the formation of pedogenic calcrete and calic soils is the leaching of calcium carbonate from upper soil horizons by downward percolating soil solutions and reprecipitation of the carbonate in alluvial horizons near the base of the soil profile. The formation of pedogenic calcrete involves many factors including climate, source of carbonate, and tectonic stability of the geomorphic surface on which the calcrete is deposited. Most of the carbonate in pedogenic calcrete is probably derived from windblown sand, dust, and rain. Calcic soils and pedogenic calcretes follow a six-stage sequence morphologic development and is based on a classification devised by Gile, Peterson and Grossman in 1966. The .six morphologic stages of carbonate deposition in soils are related to the relative age of the soil and are as follows: I. The first or youngest stage includes filamentous or faint coatings of carbonate on detrital grains. II. The second stage includes pebble coatings which are continuous; firm carbonate nodules are few to common. III. The third stage includes coalesced nodules which occur in a friable or disseminated carbonate matrix. IV. The fourth stage includes platy, firmly cemented matrix which engulfs nodules; horizon is plugged to downward moving solutions. V. The fifth stage includes soils which are platy to tabular, dense, strongly cemented. A well-developed laminar layer occurs on the upper surface. VI. The sixth and most advanced stage is massive, multilaminar, and strongly cemented calcrete with abundant pisoliths, the upper surface of which may be brecciated. Pisoliths may indicate many generations of brecciation and reformation. In general calcic soils include stages I through III and are friable to moderately indurated; whereas pedogenic calcretes include stages IV through VI and are dense and strongly indurated. In a single pedon the morphologic stage of carbonate deposition decreases downward in the profile. The stage of development may be used in local regions for correlation and determination of relative ages of soils and geomorphic surfaces. Some structures observed in pedogenic calcretes may be present in other types of calcrete but the horizontal zonation typical of deposits of soil processes is absent. Laminar structure in particular is not restricted to pedogenic deposits and is common in many varieties of calcrete. Very little chemical change occurs in the noncalcareous nonclayey fractions of calcretes with age; but clay minerals within calcretes undergo a complex history of authigenesis. There is a depletion of magnesium in the calcareous portion and an enrichment of magnesium in the clayey portion of a calcrete with age. In keeping with this relationship, montmorillonite, or mixed layer montmorillonite-illite, is common in younger calcretes; whereas the high magnesium-silicate clays, sepiolite and palygorskite, are common in older calcretes. This indicates that the magnesium depleted from the carbonate is redistributed authigenically in clay minerals. The mobility of carbonate introduces many problems in attempts to date calcretes directly. Although the relative ages of soils within a province may be determined by quant

Transformation of an academic medical center: lessons learned from restructuring and downsizing.

PubMed

Woodard, B; Fottler, M D; Kilpatrick, A O

1999-01-01

This article reviews management literature on health care transformation and describes the processes, including restructuring, job redesign, and downsizing, involved in one academic medical center's experience. The article concludes with lessons learned at each of the stages of the transformation process: planning, implementation, and process continuation. Managerial implications for similar transformation efforts in other health care organizations are suggested.

SLI Artist's Concept-Stage Separation

NASA Technical Reports Server (NTRS)

2002-01-01

NASA's Marshall Space Flight Center in Huntsville, Alabama, manages the Space Launch Initiative (SLI), NASA's priority developmental program focused on empowering America's leadership in space. SLI includes commercial, higher education and defense partnerships and contracts to offer widespread participation in both the risk and success of developing our nation's next-generation reusable launch vehicle. This photo depicts an artist's concept of a future second-generation launch vehicle during separation of stages. For SLI, architecture definition includes all components of the next-generation reusable launch system: Earth-to-orbit vehicles (the Space Shuttle is the first-generation earth-to-orbit vehicle), crew transfer vehicles, transfer stages, ground processing systems, flight operations systems, and development of business case strategies. Three contractor teams have each been funded to develop potential second generation reusable launch system architectures: The Boeing Company of Seal Beach, California; Lockheed Martin Corporation of Denver, Colorado; a team including Northrop Grumman of El Segundo, California; and Orbital Sciences Corporation of Dulles, Virginia.

Confocal Analysis of Nuclear Lamina Behavior during Male Meiosis and Spermatogenesis in Drosophila melanogaster.

PubMed

Fabbretti, Fabiana; Iannetti, Ilaria; Guglielmi, Loredana; Perconti, Susanna; Evangelistella, Chiara; Proietti De Santis, Luca; Bongiorni, Silvia; Prantera, Giorgio

2016-01-01

Lamin family proteins are structural components of a filamentous framework, the nuclear lamina (NL), underlying the inner membrane of nuclear envelope. The NL not only plays a role in nucleus mechanical support and nuclear shaping, but is also involved in many cellular processes including DNA replication, gene expression and chromatin positioning. Spermatogenesis is a very complex differentiation process in which each stage is characterized by nuclear architecture dramatic changes, from the early mitotic stage to the sperm differentiation final stage. Nevertheless, very few data are present in the literature on the NL behavior during this process. Here we show the first and complete description of NL behavior during meiosis and spermatogenesis in Drosophila melanogaster. By confocal imaging, we characterized the NL modifications from mitotic stages, through meiotic divisions to sperm differentiation with an anti-laminDm0 antibody against the major component of the Drosophila NL. We observed that continuous changes in the NL structure occurred in parallel with chromatin reorganization throughout the whole process and that meiotic divisions occurred in a closed context. Finally, we analyzed NL in solofuso meiotic mutant, where chromatin segregation is severely affected, and found the strict correlation between the presence of chromatin and that of NL.

Confocal Analysis of Nuclear Lamina Behavior during Male Meiosis and Spermatogenesis in Drosophila melanogaster

PubMed Central

Fabbretti, Fabiana; Iannetti, Ilaria; Guglielmi, Loredana; Perconti, Susanna; Evangelistella, Chiara; Proietti De Santis, Luca; Bongiorni, Silvia; Prantera, Giorgio

2016-01-01

Lamin family proteins are structural components of a filamentous framework, the nuclear lamina (NL), underlying the inner membrane of nuclear envelope. The NL not only plays a role in nucleus mechanical support and nuclear shaping, but is also involved in many cellular processes including DNA replication, gene expression and chromatin positioning. Spermatogenesis is a very complex differentiation process in which each stage is characterized by nuclear architecture dramatic changes, from the early mitotic stage to the sperm differentiation final stage. Nevertheless, very few data are present in the literature on the NL behavior during this process. Here we show the first and complete description of NL behavior during meiosis and spermatogenesis in Drosophila melanogaster. By confocal imaging, we characterized the NL modifications from mitotic stages, through meiotic divisions to sperm differentiation with an anti-laminDm0 antibody against the major component of the Drosophila NL. We observed that continuous changes in the NL structure occurred in parallel with chromatin reorganization throughout the whole process and that meiotic divisions occurred in a closed context. Finally, we analyzed NL in solofuso meiotic mutant, where chromatin segregation is severely affected, and found the strict correlation between the presence of chromatin and that of NL. PMID:26963718

Nurses' role and care practices in decision-making regarding artificial ventilation in late stage pulmonary disease.

PubMed

Jerpseth, Heidi; Dahl, Vegard; Nortvedt, Per; Halvorsen, Kristin

2017-11-01

Decisions regarding whether or not to institute mechanical ventilation during the later stages of chronic obstructive pulmonary disease is challenging both ethically, emotionally and medically. Caring for these patients is a multifaceted process where nurses play a crucial role. Research question and design: We have investigated how nurses experienced their own role in decision-making processes regarding mechanical ventilation in later stages of chronic obstructive pulmonary disease and how they consider the patients' role in these processes. We applied a qualitative approach, with six focus-group interviews of nurses (n = 26). Ethical considerations: The Regional Committees for Medical and Health Research Ethics approved the study. Voluntary informed consent was obtained. The nurses found themselves operating within a cure-directed treatment culture wherein they were unable to stand up for the caring values. They perceived their roles and responsibilities in decision-making processes regarding mechanical ventilation to patients as unclear and unsatisfactory. They also experienced inadequate interdisciplinary cooperation. Lack of communication skills, the traditional hierarchical hospital culture together with operating in a medical-orientated treatment culture where caring values is rated as less important might explain the nurses' absence in participation in the decision about mechanical ventilation. To be able to advocate for the patients' and their own right to be included in decision-making processes, nurses need an awareness of their own responsibilities. This requires personal courage, leadership who are capable of organising common interpersonal meetings and willingness on the part of the physicians to include and value the nurses' participation in decision-making processes.

Developing End-of-Training Entrustable Professional Activities for Psychiatry: Results and Methodological Lessons.

PubMed

Young, John Q; Hasser, Caitlin; Hung, Erick K; Kusz, Martin; O'Sullivan, Patricia S; Stewart, Colin; Weiss, Andrea; Williams, Nancy

2018-07-01

To develop entrustable professional activities (EPAs) for psychiatry and to demonstrate an innovative, validity-enhancing methodology that may be relevant to other specialties. A national task force employed a three-stage process from May 2014 to February 2017 to develop EPAs for psychiatry. In stage 1, the task force used an iterative consensus-driven process to construct proposed EPAs. Each included a title, full description, and relevant competencies. In stage 2, the task force interviewed four nonpsychiatric experts in EPAs and further revised the EPAs. In stage 3, the task force performed a Delphi study of national experts in psychiatric education and assessment. All survey participants completed a brief training program on EPAs. Quantitative and qualitative analysis led to further modifications. Essentialness was measured on a five-point scale. EPAs were included if the content validity index was at least 0.8 and the lower end of the asymmetric confidence interval was not lower than 4.0. Stages 1 and 2 yielded 24 and 14 EPAs, respectively. In stage 3, 31 of the 39 invited experts participated in both rounds of the Delphi study. Round 1 reduced the proposed EPAs to 13. Ten EPAs met the inclusion criteria in Round 2. The final EPAs provide a strong foundation for competency-based assessment in psychiatry. Methodological features such as critique by nonpsychiatry experts, a national Delphi study with frame-of-reference training, and stringent inclusion criteria strengthen the content validity of the findings and may serve as a model for future efforts in other specialties.

The automated multi-stage substructuring system for NASTRAN

NASA Technical Reports Server (NTRS)

Field, E. I.; Herting, D. N.; Herendeen, D. L.; Hoesly, R. L.

1975-01-01

The substructuring capability developed for eventual installation in Level 16 is now operational in a test version of NASTRAN. Its features are summarized. These include the user-oriented, Case Control type control language, the automated multi-stage matrix processing, the independent direct access data storage facilities, and the static and normal modes solution capabilities. A complete problem analysis sequence is presented with card-by-card description of the user input.

The experience of living with advanced-stage cancer: a thematic synthesis of the literature.

PubMed

García-Rueda, N; Carvajal Valcárcel, A; Saracíbar-Razquin, M; Arantzamendi Solabarrieta, M

2016-07-01

The aim of the study was to understand the experience of people living with advanced-stage cancer through literature. The search included The Cochrane Library, PubMed, PsycInfo, CINAHL and Cuiden. Thirteen studies were included. A qualitative meta-synthesis was conducted. One thread emerged from the thematic synthesis: the desire to live as normally as possible, despite being aware of the proximity of death. Three themes also emerged: "a process that is unique" with its four sub-themes; "support network" and "health context," each of them having two sub-themes. This study concludes that living with advanced-stage cancer is a unique and complex process which has both positive and negative aspects. The review provides a comprehensive view of the experience, which considers the importance of the support network and the health context in which the person lives. In this study, "normalcy" is the adjustment to the new reality and living as closely as possible to the way one lived before the disease, while developing a new relationship with being finite and death. A better understanding of the experience of living with advanced-stage cancer will help health professionals to identify the needs of the patients in order to plan individual, high-quality care. © 2016 John Wiley & Sons Ltd.

Transcriptome analysis on the exoskeleton formation in early developmetal stages and reconstruction scenario in growth-moulting in Litopenaeus vannamei.

PubMed

Gao, Yi; Wei, Jiankai; Yuan, Jianbo; Zhang, Xiaojun; Li, Fuhua; Xiang, Jianhai

2017-04-24

Exoskeleton construction is an important issue in shrimp. To better understand the molecular mechanism of exoskeleton formation, development and reconstruction, the transcriptome of the entire developmental process in Litopenaeus vannamei, including nine early developmental stages and eight adult-moulting stages, was sequenced and analysed using Illumina RNA-seq technology. A total of 117,539 unigenes were obtained, with 41.2% unigenes predicting the full-length coding sequence. Gene Ontology, Clusters of Orthologous Group (COG), the Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis and functional annotation of all unigenes gave a better understanding of the exoskeleton developmental process in L. vannamei. As a result, more than six hundred unigenes related to exoskeleton development were identified both in the early developmental stages and adult-moulting. A cascade of sequential expression events of exoskeleton-related genes were summarized, including exoskeleton formation, regulation, synthesis, degradation, mineral absorption/reabsorption, calcification and hardening. This new insight on major transcriptional events provide a deep understanding for exoskeleton formation and reconstruction in L. vannamei. In conclusion, this is the first study that characterized the integrated transcriptomic profiles cover the entire exoskeleton development from zygote to adult-moulting in a crustacean, and these findings will serve as significant references for exoskeleton developmental biology and aquaculture research.

Free and cued memory in relation to biomarker-defined abnormalities in clinically normal older adults and those at risk for Alzheimer's disease.

PubMed

Papp, Kathryn V; Amariglio, Rebecca E; Mormino, Elizabeth C; Hedden, Trey; Dekhytar, Maria; Johnson, Keith A; Sperling, Reisa A; Rentz, Dorene M

2015-07-01

Furthering our understanding of the relationship between amyloidosis (Aβ), neurodegeneration (ND), and cognition is imperative for early identification and early intervention of Alzheimer's disease (AD). However, the subtle cognitive decline differentially associated with each biomarker-defined stage of preclinical AD has yet to be fully characterized. Recent work indicates that different components of memory performance (free and cued recall) may be differentially specific to memory decline in prodromal AD. We sought to examine the relationship between free and cued recall paradigms, in addition to global composites of memory, executive functioning, and processing speed in relation to stages of preclinical AD. A total of 260 clinically normal (CN) older adults (CDR=0) from the Harvard Aging Brain study were grouped according to preclinical AD stages including Stage 0 (Aβ-/ND-), Stage 1 (Aβ+/ND-), Stage 2 (Aβ+/ND+), and suspected non-Alzheimer's associated pathology (SNAP; Aβ-/ND+). General linear models controlling for age, sex, and education were used to assess for stage-based performance differences on cognitive composites of executive functioning, processing speed, and memory in addition to free and cued delayed recall on the Selective Reminding Test (SRT) and Memory Capacity Test (MCT). Global memory performance differed between preclinical stages with Stage 2 performing worse compared with Stage 0. When examining free and cued paradigms by memory test, only the MCT (and not the SRT) revealed group differences. More specifically, Stage 1 was associated with decrements in free recall compared with Stage 0 while Stage 2 was associated with decrements in both free and cued recall. There was a trend for the SNAP group to perform worse on free recall compared with Stage 0. Finally, there was no association between preclinical stage and global composites of executive functioning or processing speed. Clinically normal older adults with underlying evidence of amyloidosis and neurodegeneration exhibit subtle, yet measurable differences in memory performance, but only on a challenging associative test. The sensitivity of free vs. cued memory paradigms may be dependent on preclinical stage such that reduced free recall is associated with amyloidosis alone (Stage 1) while a decline in cued recall may represent progression to amyloidosis and neurodegeneration (Stage 2). These findings may have practical applications for clinical assessment and clinical trial design. Copyright © 2015. Published by Elsevier Ltd.

Free and Cued Memory in relation to Biomarker-Defined Abnormalities in Clinically Normal Older Adults and Those at Risk for Alzheimer’s Disease

PubMed Central

Papp, Kathryn V.; Amariglio, Rebecca E.; Mormino, Elizabeth; Hedden, Trey; Dekhytar, Maria; Johnson, Keith A.; Sperling, Reisa A.; Rentz, Dorene M.

2015-01-01

Objectives Furthering our understanding of the relationship between amyloidosis (Aβ), neurodegeneration (ND), and cognition is imperative for early identification and early intervention of Alzheimer’s disease (AD). However, the subtle cognitive decline differentially associated with each biomarker-defined stage of preclinical AD has yet to be fully characterized. Recent work indicates that different components of memory performance (free and cued recall) may be differentially specific to memory decline in prodromal AD. We sought to examine the relationship between free and cued recall paradigms, in addition to global composites of memory, executive functioning, and processing speed in relation to stages of preclinical AD. Methods A total of 260 clinically normal (CN) older adults (CDR=0) from the Harvard Aging Brain study were grouped according to preclinical AD stages including Stage 0 (Aβ−/ND−), Stage 1 (Aβ+/ND−), Stage 2 (Aβ+/ND+), and suspected non-Alzheimer’s associated pathology (SNAP; Aβ−/ND+). General linear models controlling for age, sex, and education were used to assess for stage-based performance differences on cognitive composites of executive functioning, processing speed, and memory in addition to free and cued delayed recall on the Selective Reminding Test (SRT) and Memory Capacity Test (MCT). Results Global memory performance differed between preclinical stages with Stage 2 performing worse compared with Stage 0. When examining free and cued paradigms by memory test, only the MCT (and not the SRT) revealed group differences. More specifically, Stage 1 was associated with decrements in free recall compared with Stage 0 while Stage 2 was associated with decrements in both free and cued recall. There was a trend for the SNAP group to perform worse on free recall compared with Stage 0. Finally, there was no association between preclinical stage and global composites of executive functioning or processing speed. Conclusions Clinically normal older adults with underlying evidence of amyloidosis and neurodegeneration exhibit subtle, yet measurable differences in memory performance, but only on a challenging associative test. The sensitivity of free vs. cued memory paradigms may be dependent on preclinical stage such that reduced free recall is associated with amyloidosis alone (Stage 1) while a decline in cued recall may represent progression to amyloidosis and neurodegeneration (Stage 2). These findings may have practical applications for clinical assessment and clinical trial design. PMID:26002757

Titanium nitride formation by a dual-stage femtosecond laser process

NASA Astrophysics Data System (ADS)

Hammouti, S.; Holybee, B.; Zhu, W.; Allain, J. P.; Jurczyk, B.; Ruzic, D. N.

2018-06-01

Formation of TiN by femtosecond laser processing in controlled gas atmosphere is reported. A dual-stage process was designed and aimed to first remove and restructure the native oxide layer of titanium surface through laser irradiation under an argon-controlled atmosphere, and then to maximize titanium nitride formation through an irradiation under a nitrogen reactive environment. An extensive XPS study was performed to identify and quantify laser-induced titanium surface chemistry modifications after a single-stage laser process (Ar and N2 individually), and a dual-stage laser process. The importance of each step that composes the dual-stage laser process was demonstrated and leads to the dual-stage laser process for the formation of TiO, Ti2O3 and TiN. In this study, the largest nitride formation occurs for the dual stage process with laser conditions at 4 W/1.3 J cm-2 under argon and 5 W/1.6 J cm-2 under nitrogen, yielding a total TiN composition of 8.9%. Characterization of both single-stage and dual-stage laser process-induced surface morphologies has been performed as well, leading to the observation of a wide range of hierarchical surface structures such as high-frequency ripples, grooves, protuberances and pillow-like patterns. Finally, water wettability was assessed by means of contact angle measurements on untreated titanium surface, and titanium surfaces resulting from either single-stage laser process or dual-stage laser process. Dual-stage laser process allows a transition of titanium surface, from phobic (93°) to philic (35°), making accessible both hydrophilic and chemically functionalized hierarchical surfaces.

A Centrifugal Contactor Design to Facilitate Remote Replacement

DOE Office of Scientific and Technical Information (OSTI.GOV)

David H. Meikrantz; Jack. D. Law; Troy G. Garn

2011-03-01

Advanced designs of nuclear fuel recycling and radioactive waste treatment plants are expected to include more ambitious goals for solvent extraction based separations including; higher separations efficiency, high-level waste minimization, and a greater focus on continuous processes to minimize cost and footprint. Therefore, Annular Centrifugal Contactors (ACCs) are destined to play a more important role for such future processing schemes. This work continues the development of remote designs for ACCs that can process the large throughputs needed for future nuclear fuel recycling and radioactive waste treatment plants. A three stage, 12.5 cm diameter rotor module has been constructed and ismore » being evaluated for use in highly radioactive environments. This prototype assembly employs three standard CINC V-05 clean-in-place (CIP) units modified for remote service and replacement via new methods of connection for solution inlets, outlets, drain and CIP. Hydraulic testing and functional checks were successfully conducted and then the prototype was evaluated for remote handling and maintenance. Removal and replacement of the center position V-05R contactor in the three stage assembly was demonstrated using an overhead rail mounted PaR manipulator. Initial evaluation indicates a viable new design for interconnecting and cleaning individual stages while retaining the benefits of commercially reliable ACC equipment. Replacement of a single stage via remote manipulators and tools is estimated to take about 30 minutes, perhaps fast enough to support a contactor change without loss of process equilibrium. The design presented in this work is scalable to commercial ACC models from V-05 to V-20 with total throughput rates ranging from 20 to 650 liters per minute.« less

Developmental Transcriptome for a Facultatively Eusocial Bee, Megalopta genalis

PubMed Central

Jones, Beryl M.; Wcislo, William T.; Robinson, Gene E.

2015-01-01

Transcriptomes provide excellent foundational resources for mechanistic and evolutionary analyses of complex traits. We present a developmental transcriptome for the facultatively eusocial bee Megalopta genalis, which represents a potential transition point in the evolution of eusociality. A de novo transcriptome assembly of Megalopta genalis was generated using paired-end Illumina sequencing and the Trinity assembler. Males and females of all life stages were aligned to this transcriptome for analysis of gene expression profiles throughout development. Gene Ontology analysis indicates that stage-specific genes are involved in ion transport, cell–cell signaling, and metabolism. A number of distinct biological processes are upregulated in each life stage, and transitions between life stages involve shifts in dominant functional processes, including shifts from transcriptional regulation in embryos to metabolism in larvae, and increased lipid metabolism in adults. We expect that this transcriptome will provide a useful resource for future analyses to better understand the molecular basis of the evolution of eusociality and, more generally, phenotypic plasticity. PMID:26276382

Developmental Transcriptome for a Facultatively Eusocial Bee, Megalopta genalis.

PubMed

Jones, Beryl M; Wcislo, William T; Robinson, Gene E

2015-08-14

Transcriptomes provide excellent foundational resources for mechanistic and evolutionary analyses of complex traits. We present a developmental transcriptome for the facultatively eusocial bee Megalopta genalis, which represents a potential transition point in the evolution of eusociality. A de novo transcriptome assembly of Megalopta genalis was generated using paired-end Illumina sequencing and the Trinity assembler. Males and females of all life stages were aligned to this transcriptome for analysis of gene expression profiles throughout development. Gene Ontology analysis indicates that stage-specific genes are involved in ion transport, cell-cell signaling, and metabolism. A number of distinct biological processes are upregulated in each life stage, and transitions between life stages involve shifts in dominant functional processes, including shifts from transcriptional regulation in embryos to metabolism in larvae, and increased lipid metabolism in adults. We expect that this transcriptome will provide a useful resource for future analyses to better understand the molecular basis of the evolution of eusociality and, more generally, phenotypic plasticity. Copyright © 2015 Jones et al.

[Artificial intelligence in sleep analysis (ARTISANA)--modelling visual processes in sleep classification].

PubMed

Schwaibold, M; Schöller, B; Penzel, T; Bolz, A

2001-05-01

We describe a novel approach to the problem of automated sleep stage recognition. The ARTISANA algorithm mimics the behaviour of a human expert visually scoring sleep stages (Rechtschaffen and Kales classification). It comprises a number of interacting components that imitate the stepwise approach of the human expert, and artificial intelligence components. On the basis of parameters extracted at 1-s intervals from the signal curves, artificial neural networks recognize the incidence of typical patterns, e.g. delta activity or K complexes. This is followed by a rule interpretation stage that identifies the sleep stage with the aid of a neuro-fuzzy system while taking account of the context. Validation studies based on the records of 8 patients with obstructive sleep apnoea have confirmed the potential of this approach. Further features of the system include the transparency of the decision-taking process, and the flexibility of the option for expanding the system to cover new patterns and criteria.

Apparatus and method for two-stage oxidation of wastes

DOEpatents

Fleischman, Scott D.

1995-01-01

An apparatus and method for oxidizing wastes in a two-stage process. The apparatus includes an oxidation device, a gas-liquid contacting column and an electrocell. In the first stage of the process, wastes are heated in the presence of air to partially oxidize the wastes. The heated wastes produce an off-gas stream containing oxidizable materials. In the second stage, the off-gas stream is cooled and flowed through the contacting column, where the off-gas stream is contacted with an aqueous acid stream containing an oxidizing agent having at least two positive valence states. At least a portion of the oxidizable materials are transferred to the acid stream and destroyed by the oxidizing agent. During oxidation, the valence of the oxidizing agent is decreased from its higher state to its lower state. The acid stream is flowed to the electrocell, where an electric current is applied to the stream to restore the oxidizing agent to its higher valence state. The regenerated acid stream is recycled to the contacting column.

Multi-stage circulating fluidized bed syngas cooling

DOEpatents

Liu, Guohai; Vimalchand, Pannalal; Guan, Xiaofeng; Peng, WanWang

2016-10-11

A method and apparatus for cooling hot gas streams in the temperature range 800.degree. C. to 1600.degree. C. using multi-stage circulating fluid bed (CFB) coolers is disclosed. The invention relates to cooling the hot syngas from coal gasifiers in which the hot syngas entrains substances that foul, erode and corrode heat transfer surfaces upon contact in conventional coolers. The hot syngas is cooled by extracting and indirectly transferring heat to heat transfer surfaces with circulating inert solid particles in CFB syngas coolers. The CFB syngas coolers are staged to facilitate generation of steam at multiple conditions and hot boiler feed water that are necessary for power generation in an IGCC process. The multi-stage syngas cooler can include internally circulating fluid bed coolers, externally circulating fluid bed coolers and hybrid coolers that incorporate features of both internally and externally circulating fluid bed coolers. Higher process efficiencies can be realized as the invention can handle hot syngas from various types of gasifiers without the need for a less efficient precooling step.

Research on the discharge characteristics for water tree in crosslinked polyethylene cable based on plasma-chemical model

NASA Astrophysics Data System (ADS)

Fan, Yang; Qi, Yang; Bing, Gao; Rong, Xia; Yanjie, Le; Iroegbu, Paul Ikechukwu

2018-03-01

Water tree is the predominant defect in high-voltage crosslinked polyethylene cables. The microscopic mechanism in the discharge process is not fully understood; hence, a drawback is created towards an effective method to evaluate the insulation status. In order to investigate the growth of water tree, a plasma-chemical model is developed. The dynamic characteristics of the discharge process including voltage waveform, current waveform, electron density, electric potential, and electric field intensity are analyzed. Our results show that the distorted electric field is the predominant contributing factor of electron avalanche formation, which inevitably leads to the formation of pulse current. In addition, it is found that characteristic parameters such as the pulse width and pulse number have a great relevance to the length of water tree. Accordingly, the growth of water tree can be divided into the initial stage, development stage, and pre-breakdown stage, which provides a reference for evaluating the deteriorated stages of crosslinked polyethylene cables.

Yeast community associated with the solid state fermentation of traditional Chinese Maotai-flavor liquor.

PubMed

Wu, Qun; Chen, Liangqiang; Xu, Yan

2013-09-02

Yeasts are the most important group of microorganisms contributing to liquor quality in the solid-state fermentation process of Chinese Maotai-flavor liquor. There occurred a complex yeast community structure during this process, including stages of Daqu (the starter) making, stacking fermentation on the ground and liquor fermentation in the pits. In the Daqu making stage, few yeast strains accumulated. However, the stacking fermentation stage accumulated nine yeast species with different physio-biochemical characteristics. But only four species kept dominant until liquor fermentation, which were Zygosaccharomyces bailii, Saccharomyces cerevisiae, Pichia membranifaciens, and Schizosaccharomyces pombe, implying their important functions in liquor making. The four species tended to inhabit in different locations of the stack and pits during stacking and liquor fermentation, due to the condition heterogeneity of the solid-state fermentation, including the different fermentation temperature profiles and oxygen density in different locations. Moreover, yeast population was much larger in the upper layer than that in the middle and bottom layers in liquor fermentation, which was in accordance with the profile of reducing sugar consumption and ethanol production. This was a systematical investigation of yeast community structure dynamics in the Maotai-flavor liquor fermentation process. It would be of help to understand the fermentative mechanism in solid-state fermentation for Maotai-flavor liquor. © 2013.

The stages of driving cessation for people with dementia: needs and challenges.

PubMed

Liddle, Jacki; Bennett, Sally; Allen, Shelley; Lie, David C; Standen, Bradene; Pachana, Nancy A

2013-12-01

The impact of dementia on safe driving is well recognized and is generally accepted that all people with dementia are likely to need to cease driving at some stage in the disease process. Both driving and driving cessation can have poor outcomes for people with dementia and their caregivers in terms of health, safety, community access, and well-being. Although approaches to facilitate better outcomes from driving cessation are being developed, the processes of driving cessation for people with dementia are still not fully understood. Within a descriptive phenomenological framework, semi-structured interviews were undertaken with key stakeholders, including retired drivers with dementia, family members, and health professionals. Findings from four retired drivers with dementia, 11 caregivers, and 15 health professionals characterized driving cessation for people with dementia as a process with three stages and associated challenges and needs. The early stage involved worried waiting, balancing safety with impending losses, and the challenge of knowing when to stop. The crisis stage involved risky driving or difficult transportation, acute adjustment to cessation and life without driving, and relationship conflict. The post-cessation stage was described as a long journey with ongoing battles and adjustments as well as decreased life space, and was affected by the disease progression and the exhaustion of caregiver. The concept of stages of driving cessation for people with dementia could be used to develop new approaches or adapt existing approaches to driving cessation. Interventions would need to be individualized, optimally timed, and address grief, explore realistic alternative community access, and simultaneously maintain key relationships and provide caregiver support.

Formation of the Foreign Language Discursive Competence of Pedagogical Faculties Students in the Process of Intercultural Dialogue

ERIC Educational Resources Information Center

Ponomarenko, Larisa N.; Zlobina, Irina S.; Galitskih, Elena O.; Rublyova, Olga S.

2017-01-01

The article presents the main ideas of concept of foreign language discursive competence formation among university and secondary school students by means of intercultural dialogue. The concept includes fundamental principles, activity stages of educational process, and criteria of foreign language discursive competence formation. Innovation of…

Marketing an Information Service: A Case Study of the OECS Economic Affairs Secretariat Documentation Centre.

ERIC Educational Resources Information Center

Evan-Wong, Sue; de Freitas, Claudette

1995-01-01

Presents a methodology for marketing an information service which focuses on including information users in the strategic marketing planning process. Identifies the following stages of a marketing planning process: analysis of the environment, information audit, information needs assessment, market opportunity analysis, tactical marketing program,…

Bone Marrow Aspiration and Biopsy

MedlinePlus

... point out the need for further investigation. For example, a patient with decreased red blood cells (RBCs) ... and/or staged with this process. A few examples include: Leukemia — cancer of the blood cells Anemia — ...

Symmetrical and Asymmetrical Interactions between Facial Expressions and Gender Information in Face Perception.

PubMed

Liu, Chengwei; Liu, Ying; Iqbal, Zahida; Li, Wenhui; Lv, Bo; Jiang, Zhongqing

2017-01-01

To investigate the interaction between facial expressions and facial gender information during face perception, the present study matched the intensities of the two types of information in face images and then adopted the orthogonal condition of the Garner Paradigm to present the images to participants who were required to judge the gender and expression of the faces; the gender and expression presentations were varied orthogonally. Gender and expression processing displayed a mutual interaction. On the one hand, the judgment of angry expressions occurred faster when presented with male facial images; on the other hand, the classification of the female gender occurred faster when presented with a happy facial expression than when presented with an angry facial expression. According to the evoked-related potential results, the expression classification was influenced by gender during the face structural processing stage (as indexed by N170), which indicates the promotion or interference of facial gender with the coding of facial expression features. However, gender processing was affected by facial expressions in more stages, including the early (P1) and late (LPC) stages of perceptual processing, reflecting that emotional expression influences gender processing mainly by directing attention.

Some ways of plants wastes utilization in bioregenerative life support systems

NASA Astrophysics Data System (ADS)

Kovaleva, N. P.; Tikhomirov, A. A.; Tirranen, L. S.; Ushakova, S. A.; Zolotukhin, I. G.; Anischenko, O. V.

In works on experimental modeling of bioregenerative life support systems BLSS carried out at Institute of Biophysics Russian Academy of Science Siberian Branch SB RAS the possibility of increase of a system closure degree under the condition of inedible plant biomass return into the organic matter turnover was demonstrated At the same time when radish inedible biomass was subjected to biological oxidation in soil-like substrate SLS after its drying then wheat straw was subjected to stepwise processing including mushrooms growing stage Mushrooms cultivation facilitated to lignin destruction and quicker straw decomposition On the other hand mushrooms growing required additional technological procedures leading to complication of a technological chain of straw processing The purpose of this work is to study the possibility of exclusion of mushrooms growing stage under straw pretreatment for its further use as an equivalent of radish edible biomass grown on SLS To solve the problem put by the radish cenosis in a conveyer regime was grown The conveyer included radish four ages with the conveyer step equal to 7 days The experiment consisted of two successive stages On the first stage radish was grown without straw addition into SLS control To return mineral elements into SLS the biomass grown was restored in SLS On the second stage inedible radish biomass and wheat straw were returned into SLS in the quantity equivalent to edible biomass The possibility of the method described was estimated according to plant productivity microbiological

Quantitative Experimental Study of Defects Induced by Process Parameters in the High-Pressure Die Cast Process

NASA Astrophysics Data System (ADS)

Sharifi, P.; Jamali, J.; Sadayappan, K.; Wood, J. T.

2018-05-01

A quantitative experimental study of the effects of process parameters on the formation of defects during solidification of high-pressure die cast magnesium alloy components is presented. The parameters studied are slow-stage velocity, fast-stage velocity, intensification pressure, and die temperature. The amount of various defects are quantitatively characterized. Multiple runs of the commercial casting simulation package, ProCAST™, are used to model the mold-filling and solidification events. Several locations in the component including knit lines, last-to-fill region, and last-to-solidify region are identified as the critical regions that have a high concentration of defects. The area fractions of total porosity, shrinkage porosity, gas porosity, and externally solidified grains are separately measured. This study shows that the process parameters, fluid flow and local solidification conditions, play major roles in the formation of defects during HPDC process.

Improvement of the System of Training of Specialists by University for Coal Mining Enterprises

NASA Astrophysics Data System (ADS)

Mikhalchenko, Vadim; Seredkina, Irina

2017-11-01

In the article the ingenious technique of the Quality Function Deployment with reference to the process of training of specialists with higher education by university is considered. The method is based on the step-by-step conversion of customer requirements into specific organizational, meaningful and functional transformations of the technological process of the university. A fully deployed quality function includes four stages of tracking customer requirements while creating a product: product planning and design, process design, production design. The Quality Function Deployment can be considered as one of the methods for optimizing the technological processes of training of specialists with higher education in the current economic conditions. Implemented at the initial stages of the life cycle of the technological process, it ensures not only the high quality of the "product" of graduate school, but also the fullest possible satisfaction of consumer's requests and expectations.

X-ray emission from high temperature plasmas

NASA Technical Reports Server (NTRS)

Harries, W. L.

1977-01-01

The physical processes occurring in plasma focus devices were investigated with particular emphasis on X-ray emission. Topics discussed include: trajectories of high energy electrons; detection of ion trajectories; spatial distribution of neutron emission; space and time resolved emission of hard X-rays from a plasma focus; the staged plasma focus as a variation of the hypocloidal pinch; formation of current sheets in a staged plasma focus; and X-ray and neutron emission from a staged plasma focus. The possibility of operating dense plasma-focus type devices in multiple arrays beyond the scaling law for a single gun is discussed.

Connecting to Get Things Done: A Conceptual Model of the Process Used to Respond to Bias Incidents

ERIC Educational Resources Information Center

LePeau, Lucy A.; Morgan, Demetri L.; Zimmerman, Hilary B.; Snipes, Jeremy T.; Marcotte, Beth A.

2016-01-01

In this study, we interviewed victims of bias incidents and members of a bias response team to investigate the process the team used to respond to incidents. Incidents included acts of sexism, homophobia, and racism on a large, predominantly White research university in the Midwest. Data were analyzed using a 4-stage coding process. The emergent…

Impact of dementia on cancer discovery and pain.

PubMed

Iritani, Shuji; Tohgi, Mizuho; Miyata, Hiroaki; Ohi, Gen

2011-03-01

Dementia is clinically noted to influence both reporting and experience of cancer pains. However, no systemic evaluation of this aspect has been reported. The aim of the present study was to retrospectively evaluate how dementia modified the cancer discovery process, frequency of cancer pain reports and analgesic-narcotic use at a large psychiatric hospital. We reviewed all the records of cancer patients with and without dementia treated at the surgical ward of Matsuzawa Hospital from 1993 to 2004. Psychiatric diseases other than dementia, brain metastasis and alcoholism, as well as leukaemia and skin cancer, were excluded. Patients' communicativeness as to pain was ascertained from nursing records. A total of 134 cancer patients with and without dementia (50 demented and 84 non-demented) were included. Demented patients were accidentally discovered to have cancer (48%) or by an unexpected unfolding of clinical signs (44%), whereas most non-demented patients (63%) voluntarily sought medical evaluation (P= 0.000). Overall, 76% of non-demented patients had cancer pains (stages I and II, 64%; stages III and IV, 84%), whereas just 22% of demented patients had cancer pains (stages I and II, 16%; stages III and IV, 26%; P= 0.000). Non-demented patients showed stage-dependent requirements for both non-narcotic analgesics (stages I and II, 64%; stages III and IV, 84%) and narcotics (stages I and II, 0%; stages III and IV, 41%). Demented patients required much less analgesics (stages I and II, 11%; stages III and IV, 13%), with only one stage IV patient requiring narcotics (P= 0.000). Dementia greatly modifies the cancer discovery process, reduces prevalence of cancer pain and analgesic requirement. © 2011 The Authors. Psychogeriatrics © 2011 Japanese Psychogeriatric Society.

Understanding motivation to implement smoking bans among mothers with a hospitalized infant.

PubMed

Stotts, Angela L; Klawans, Michelle R; Northrup, Thomas F; Villarreal, Yolanda; Hovell, Melbourne F

2016-07-01

Secondhand smoke exposure (SHSe) poses risks to hospitalized children upon discharge and no uniformly effective interventions have been identified. Understanding change-related processes and social-contextual factors related to motivation for implementing home and car smoking bans may inform interventions to reduce infant SHSe among mothers with a hospitalized infant. In this cross-sectional, secondary analysis, mothers of neonatal ICU infants who reported smoking or living with a smoker (N=205) were assigned to stages of change (pre-contemplation, contemplation, preparation, or action) based on behaviors and intentions for establishing smoking bans in their homes and cars. Processes of change (POC) for SHSe reduction practices, self-efficacy, depressive symptoms, generalized anxiety, and social support for not smoking in the home were examined across all four stages. The majority of mothers were in the action stage for having a home smoking ban in place (55%); only 35% of participants were in action for a car smoking ban. POC use differed across the stages of change for having a home ban (p=0.004) and car ban (p=0.02), with earlier stages using fewer overall and relatively fewer cognitive/affective processes. Earlier stage women also reported lower self-efficacy to change, less familial and partner support for in-home smoking bans, and more depressive symptoms. Novel intervention targets were identified, including cognitive/affective change processes, mental health, and familial/social contingencies for implementing SHSe protective practices. Creative ways in which to affect change at the individual and household level are needed in order to fully address the complexity of child SHSe. Copyright © 2016 Elsevier Ltd. All rights reserved.

The methodology of database design in organization management systems

NASA Astrophysics Data System (ADS)

Chudinov, I. L.; Osipova, V. V.; Bobrova, Y. V.

2017-01-01

The paper describes the unified methodology of database design for management information systems. Designing the conceptual information model for the domain area is the most important and labor-intensive stage in database design. Basing on the proposed integrated approach to design, the conceptual information model, the main principles of developing the relation databases are provided and user’s information needs are considered. According to the methodology, the process of designing the conceptual information model includes three basic stages, which are defined in detail. Finally, the article describes the process of performing the results of analyzing user’s information needs and the rationale for use of classifiers.

Effect of interface reaction and diffusion on stress-oxidation coupling at high temperature

NASA Astrophysics Data System (ADS)

Yue, Mengkun; Dong, Xuelin; Fang, Xufei; Feng, Xue

2018-04-01

High-temperature structural materials undergo oxidation during the service, and stress would generate in the oxide film. Understanding the coupling effect between stress and oxidation contributes to the understanding of material degradation and failure during the oxidation process. Here, we propose a model to investigative the coupling effect of stress and oxidation at high temperature by considering the three-stage oxidation process, where both the interface reaction and the diffusion process are present. The governing equations including the oxidation kinetics and stress equilibrium for isothermal oxidation under stress-oxidation coupling effect have been derived. The theory is validated by comparing with the experimental results of SiO2 grown on Si substrate. Results show that the coupling of stress and oxidation influences the growth of the oxide film by affecting all three stages of the oxidation process.

Perspectives on the design of safer nanomaterials and manufacturing processes

NASA Astrophysics Data System (ADS)

Geraci, Charles; Heidel, Donna; Sayes, Christie; Hodson, Laura; Schulte, Paul; Eastlake, Adrienne; Brenner, Sara

2015-09-01

A concerted effort is being made to insert Prevention through Design principles into discussions of sustainability, occupational safety and health, and green chemistry related to nanotechnology. Prevention through Design is a set of principles, which includes solutions to design out potential hazards in nanomanufacturing including the design of nanomaterials, and strategies to eliminate exposures and minimize risks that may be related to the manufacturing processes and equipment at various stages of the lifecycle of an engineered nanomaterial.

Modeling the Fate of Groundwater Contaminants Resulting from Leakage of Butanol-blended Fuel

DTIC Science & Technology

2010-03-01

aviation turbine and automotive engines is an organic liquid comprised of numerous hydrocarbons that may include paraffins, naphthenes , and aromatics...process, known as either hydroprocessing or hydrotreating, consists of two stages. In the first stage, oxygen is removed from oil. In the second...66. Namocatcat, J.A., J. Fang, M.J. Barcelona, A.T.O. Quibuyen, and T.A. Abrajano. Trimethylbenzoic acids as metabolite signatures in the

Surface Composition Influence on Internal Gas Flow at Large Knudsen Numbers

DTIC Science & Technology

2000-07-09

situated in an ultra high vacuum system . The system is supplied with means of gas phase, surface CP585, Rarefied Gas Dynamics: 22nd International...control and gas flow measuring system . The experimental procedure consists in a few stages. The first stage includes surface preparation process at...solid body system , Proceedings 20-th Int. Symp. Rarefied Gas Dynamics, Peking University Press, Beijing, China, 1997, pp. 387-391. 3. Lord, R.G

An overview of the dynamics of the Volcanic Paroxysmal Explosive Activity, and related seismicity, at andesitic and dacitic volcanoes (1960-2010)

NASA Astrophysics Data System (ADS)

Zobin, Vyacheslav M.

2018-05-01

Understanding volcanic paroxysmal explosive activity requires the knowledge of many associated processes. An overview of the dynamics of paroxysmal explosive eruptions (PEEs) at andesitic and dacitic volcanoes occurring between 1960 and 2010 is presented here. This overview is based mainly on a description of the pre-eruptive and eruptive events, as well as on the related seismic measurements. The selected eruptions are grouped according to their Volcanic Explosivity Index (VEI). A first group includes three eruptions of VEI 5-6 (Mount St. Helens, 1980; El Chichón, 1982, and Pinatubo, 1991) and a second group includes three eruptions of VEI 3 (Usu volcano, 1977; Soufriere Hills Volcano (SHV), 1996, and Volcán de Colima, 2005). The PEEs of the first group have similarity in their developments that allows to propose a 5-stage scheme of their dynamics process. Between these stages are: long (more than 120 years) period of quiescence (stage 1), preliminary volcano-tectonic (VT) earthquake swarm (stage 2), period of phreatic explosions (stage 3) and then, PEE appearance (stage 4). It was shown also that the PEEs of this group during their Plinian stage "triggered" the earthquake sequences beneath the volcanic structures with the maximum magnitude of earthquakes proportional to the volume of ejecta of PEEs (stage 5). Three discussed PEEs of the second group with lower VEI developed in more individual styles, not keeping within any general scheme. Among these, one PEE (SHV) may be considered as partly following in development to the PEEs of the first group, having stages 1, 3 and 4. The PEEs of Usu volcano and of Volcán de Colima had no preliminary long-term stages of quiescence. The PEE at Usu volcano came just at the end of the preceding short swarm of VT earthquakes. At Volcán de Colima, no preceding swarm of VT occurred. This absence of any regularity in development of lower VEI eruptions may refer, among other reasons, to different conditions of opening of the magmatic conduit during these eruptions.

An Improved Effective Cost Review Process for Value Engineering

PubMed Central

Joo, D. S.; Park, J. I.

2014-01-01

Second-look value engineering (VE) is an approach that aims to lower the costs of products for which target costs are not being met during the production stage. Participants in second-look VE typically come up with a variety of ideas for cost cutting, but the outcomes often depend on their levels of experience, and not many good alternatives are available during the production stage. Nonetheless, good ideas have been consistently generated by VE experts. This paper investigates past second-look VE cases and the thinking processes of VE experts and proposes a cost review process as a systematic means of investigating cost-cutting ideas. This cost review process includes the use of an idea checklist and a specification review process. In addition to presenting the process, this paper reports on its feasibility, based on its introduction into a VE training course as part of a pilot study. The results indicate that the cost review process is effective in generating ideas for later analysis. PMID:25580459

An improved effective cost review process for value engineering.

PubMed

Joo, D S; Park, J I

2014-01-01

Second-look value engineering (VE) is an approach that aims to lower the costs of products for which target costs are not being met during the production stage. Participants in second-look VE typically come up with a variety of ideas for cost cutting, but the outcomes often depend on their levels of experience, and not many good alternatives are available during the production stage. Nonetheless, good ideas have been consistently generated by VE experts. This paper investigates past second-look VE cases and the thinking processes of VE experts and proposes a cost review process as a systematic means of investigating cost-cutting ideas. This cost review process includes the use of an idea checklist and a specification review process. In addition to presenting the process, this paper reports on its feasibility, based on its introduction into a VE training course as part of a pilot study. The results indicate that the cost review process is effective in generating ideas for later analysis.

Categorization for Faces and Tools—Two Classes of Objects Shaped by Different Experience—Differs in Processing Timing, Brain Areas Involved, and Repetition Effects

PubMed Central

Kozunov, Vladimir; Nikolaeva, Anastasia; Stroganova, Tatiana A.

2018-01-01

The brain mechanisms that integrate the separate features of sensory input into a meaningful percept depend upon the prior experience of interaction with the object and differ between categories of objects. Recent studies using representational similarity analysis (RSA) have characterized either the spatial patterns of brain activity for different categories of objects or described how category structure in neuronal representations emerges in time, but never simultaneously. Here we applied a novel, region-based, multivariate pattern classification approach in combination with RSA to magnetoencephalography data to extract activity associated with qualitatively distinct processing stages of visual perception. We asked participants to name what they see whilst viewing bitonal visual stimuli of two categories predominantly shaped by either value-dependent or sensorimotor experience, namely faces and tools, and meaningless images. We aimed to disambiguate the spatiotemporal patterns of brain activity between the meaningful categories and determine which differences in their processing were attributable to either perceptual categorization per se, or later-stage mentalizing-related processes. We have extracted three stages of cortical activity corresponding to low-level processing, category-specific feature binding, and supra-categorical processing. All face-specific spatiotemporal patterns were associated with bilateral activation of ventral occipito-temporal areas during the feature binding stage at 140–170 ms. The tool-specific activity was found both within the categorization stage and in a later period not thought to be associated with binding processes. The tool-specific binding-related activity was detected within a 210–220 ms window and was located to the intraparietal sulcus of the left hemisphere. Brain activity common for both meaningful categories started at 250 ms and included widely distributed assemblies within parietal, temporal, and prefrontal regions. Furthermore, we hypothesized and tested whether activity within face and tool-specific binding-related patterns would demonstrate oppositely acting effects following procedural perceptual learning. We found that activity in the ventral, face-specific network increased following the stimuli repetition. In contrast, tool processing in the dorsal network adapted by reducing its activity over the repetition period. Altogether, we have demonstrated that activity associated with visual processing of faces and tools during the categorization stage differ in processing timing, brain areas involved, and in their dynamics underlying stimuli learning. PMID:29379426

Categorization for Faces and Tools-Two Classes of Objects Shaped by Different Experience-Differs in Processing Timing, Brain Areas Involved, and Repetition Effects.

PubMed

Kozunov, Vladimir; Nikolaeva, Anastasia; Stroganova, Tatiana A

2017-01-01

The brain mechanisms that integrate the separate features of sensory input into a meaningful percept depend upon the prior experience of interaction with the object and differ between categories of objects. Recent studies using representational similarity analysis (RSA) have characterized either the spatial patterns of brain activity for different categories of objects or described how category structure in neuronal representations emerges in time, but never simultaneously. Here we applied a novel, region-based, multivariate pattern classification approach in combination with RSA to magnetoencephalography data to extract activity associated with qualitatively distinct processing stages of visual perception. We asked participants to name what they see whilst viewing bitonal visual stimuli of two categories predominantly shaped by either value-dependent or sensorimotor experience, namely faces and tools, and meaningless images. We aimed to disambiguate the spatiotemporal patterns of brain activity between the meaningful categories and determine which differences in their processing were attributable to either perceptual categorization per se , or later-stage mentalizing-related processes. We have extracted three stages of cortical activity corresponding to low-level processing, category-specific feature binding, and supra-categorical processing. All face-specific spatiotemporal patterns were associated with bilateral activation of ventral occipito-temporal areas during the feature binding stage at 140-170 ms. The tool-specific activity was found both within the categorization stage and in a later period not thought to be associated with binding processes. The tool-specific binding-related activity was detected within a 210-220 ms window and was located to the intraparietal sulcus of the left hemisphere. Brain activity common for both meaningful categories started at 250 ms and included widely distributed assemblies within parietal, temporal, and prefrontal regions. Furthermore, we hypothesized and tested whether activity within face and tool-specific binding-related patterns would demonstrate oppositely acting effects following procedural perceptual learning. We found that activity in the ventral, face-specific network increased following the stimuli repetition. In contrast, tool processing in the dorsal network adapted by reducing its activity over the repetition period. Altogether, we have demonstrated that activity associated with visual processing of faces and tools during the categorization stage differ in processing timing, brain areas involved, and in their dynamics underlying stimuli learning.

A case study of the change process of integrating technology into an elementary science methods course from 1997 to 2003

NASA Astrophysics Data System (ADS)

Hsu, Pi-Sui

The purpose of this qualitative case study was to provide a detailed description of the change process of technology integration into a science methods course, SCIED 458, as well as to interpret and analyze essential issues involved in the change process and examine how these factors influenced the change process. This study undertook qualitative research that employed case study research design. In-depth interviewing and review of the documents were two major data collection methods in this study. Participants included the three key faculty members in the science education program, a former graduate student who participated in writing the Link-to-Learn grant proposal, a former graduate student who taught SCIED 458, and two current graduate students who were teaching SCIED 458. A number of data analysis strategies were used in this study; these strategies included (1) coding for different periods of time and project categories and roles of people, (2) identifying themes, trends and coding for patterns, (3) reducing the data for analysis of trends and synthesizing and summarizing the data, and (4) integrating the data into one analytical framework. The findings indicated that this change process had evolved through the stages of adoption and diffusion, implementation, and institutionalization and a number of strategies facilitated the changes in individual stages, including the formation of a leadership team in the early stages, gradual adoption of technology tools, use of powerful pedagogy and methodology, the formation of a research community, and separation of technology training and subject teaching. The findings also indicated the essential factors and systems that interacted with each other and sustained the change process; these included a transformational shared leadership team, the formation of a learning and research community, reduced resistance of the elementary prospective teachers to technology, availability of university resources, involvement of the local school districts, support of the state department of education, recognition of the professional organizations, creation of partnerships with software companies, and technology advancements in society. A framework for integrating technology was presented to assist school reformers and instructional designers in initiating, implementing, and sustaining the changes due to technology integration in a systemic manner.

Developing teaching process for enhancing students' mathematical problem solving in the 21st century through STEM education

NASA Astrophysics Data System (ADS)

Prawvichien, Sutthaporn; Siripun, Kulpatsorn; Yuenyong, Chokchai

2018-01-01

The STEM education could provide the context for students' learning in the 21st century. The Mathematical problem solving requires a context which simulates real life in order to give students experience of the power of mathematics in the world around them. This study aimed to develop the teaching process for enhancing students' mathematical problem solving in the 21st century through STEM education. The paper will clarify the STEM learning activities about graph theories regarding on the 6 steps of engineering design process. These include identify a challenge, exploring ideas, designing and planning, doing and developing, test and evaluate, and present the solution. The learning activities will start from the Identify a challenge stage which provides the northern part of Thailand flooding situation in order to set the students' tasks of develop the solutions of providing the routes of fastest moving people away from the flooding areas. The explore ideas stage will provide activities for enhance students to learn some knowledge based for designing the possible solutions. This knowledge based could focus on measuring, geometry, graph theory, and mathematical process. The design and plan stage will ask students to model the city based on the map and then provide the possible routes. The doing and development stage will ask students to develop the routes based on their possible model. The test and evaluating will ask students to clarify how to test and evaluate the possible routes, and then test it. The present solution stage will ask students to present the whole process of designing routes. Then, the paper will discuss how these learning activities could enhance students' mathematical problem solving. The paper may have implication for STEM education in school setting.

Theta oscillations are sensitive to both early and late conflict processing stages: effects of alcohol intoxication.

PubMed

Kovacevic, Sanja; Azma, Sheeva; Irimia, Andrei; Sherfey, Jason; Halgren, Eric; Marinkovic, Ksenija

2012-01-01

Prior neuroimaging evidence indicates that decision conflict activates medial and lateral prefrontal and parietal cortices. Theoretical accounts of cognitive control highlight anterior cingulate cortex (ACC) as a central node in this network. However, a better understanding of the relative primacy and functional contributions of these areas to decision conflict requires insight into the neural dynamics of successive processing stages including conflict detection, response selection and execution. Moderate alcohol intoxication impairs cognitive control as it interferes with the ability to inhibit dominant, prepotent responses when they are no longer correct. To examine the effects of moderate intoxication on successive processing stages during cognitive control, spatio-temporal changes in total event-related theta power were measured during Stroop-induced conflict. Healthy social drinkers served as their own controls by participating in both alcohol (0.6 g/kg ethanol for men, 0.55 g/kg women) and placebo conditions in a counterbalanced design. Anatomically-constrained magnetoencephalography (aMEG) approach was applied to complex power spectra for theta (4-7 Hz) frequencies. The principal generator of event-related theta power to conflict was estimated to ACC, with contributions from fronto-parietal areas. The ACC was uniquely sensitive to conflict during both early conflict detection, and later response selection and execution stages. Alcohol attenuated theta power to conflict across successive processing stages, suggesting that alcohol-induced deficits in cognitive control may result from theta suppression in the executive network. Slower RTs were associated with attenuated theta power estimated to ACC, indicating that alcohol impairs motor preparation and execution subserved by the ACC. In addition to their relevance for the currently prevailing accounts of cognitive control, our results suggest that alcohol-induced impairment of top-down strategic processing underlies poor self-control and inability to refrain from drinking.

Development and testing of study tools and methods to examine ethnic bias and clinical decision-making among medical students in New Zealand: The Bias and Decision-Making in Medicine (BDMM) study.

PubMed

Harris, Ricci; Cormack, Donna; Curtis, Elana; Jones, Rhys; Stanley, James; Lacey, Cameron

2016-07-11

Health provider racial/ethnic bias and its relationship to clinical decision-making is an emerging area of research focus in understanding and addressing ethnic health inequities. Examining potential racial/ethnic bias among medical students may provide important information to inform medical education and training. This paper describes the development, pretesting and piloting of study content, tools and processes for an online study of racial/ethnic bias (comparing Māori and New Zealand European) and clinical decision-making among final year medical students in New Zealand (NZ). The study was developed, pretested and piloted using a staged process (eight stages within five phases). Phase 1 included three stages: 1) scoping and conceptual framework development; 2) literature review and identification of potential measures and items; and, 3) development and adaptation of study content. Three main components were identified to assess different aspects of racial/ethnic bias: (1) implicit racial/ethnic bias using NZ-specific Implicit Association Tests (IATs); (2) explicit racial/ethnic bias using direct questions; and, (3) clinical decision-making, using chronic disease vignettes. Phase 2 (stage 4) comprised expert review and refinement. Formal pretesting (Phase 3) included construct testing using sorting and rating tasks (stage 5) and cognitive interviewing (stage 6). Phase 4 (stage 7) involved content revision and building of the web-based study, followed by pilot testing in Phase 5 (stage 8). Materials identified for potential inclusion performed well in construct testing among six participants. This assisted in the prioritisation and selection of measures that worked best in the New Zealand context and aligned with constructs of interest. Findings from the cognitive interviewing (nine participants) on the clarity, meaning, and acceptability of measures led to changes in the final wording of items and ordering of questions. Piloting (18 participants) confirmed the overall functionality of the web-based questionnaire, with a few minor revisions made to the final study. Robust processes are required in the development of study content to assess racial/ethnic bias in order to optimise the validity of specific measures, ensure acceptability and minimise potential problems. This paper has utility for other researchers in this area by informing potential development approaches and identifying possible measurement tools.

Development and morphogenesis of human wrist joint during embryonic and early fetal period

PubMed Central

Hita-Contreras, Fidel; Martínez-Amat, Antonio; Ortiz, Raúl; Caba, Octavio; Álvarez, Pablo; Prados, José C; Lomas-Vega, Rafael; Aránega, Antonia; Sánchez-Montesinos, Indalecio; Mérida-Velasco, Juan A

2012-01-01

The development of the human wrist joint has been studied widely, with the main focus on carpal chondrogenesis, ligaments and triangular fibrocartilage. However, there are some discrepancies concerning the origin and morphogenetic time-table of these structures, including nerves, muscles and vascular elements. For this study we used serial sections of 57 human embryonic (n = 30) and fetal (n = 27) specimens from O’Rahilly stages 17–23 and 9–14 weeks, respectively. The following phases in carpal morphogenesis have been established: undifferentiated mesenchyme (stage 17), condensated mesenchyme (stages 18 and 19), pre-chondrogenic (stages 19 and 20) and chondrogenic (stages 21 and over). Carpal chondrification and osteogenic processes are similar, starting with capitate and hamate (stage 19) and ending with pisiform (stage 22). In week 14, a vascular bud penetrates into the lunate cartilaginous mold, early sign of the osteogenic process that will be completed after birth. In stage 18, median, ulnar and radial nerves and thenar eminence appear in the hand plate. In stage 21, there are indications of the interosseous muscles, and in stage 22 flexor digitorum superficialis, flexor digitorum profundus and lumbrical muscles, transverse carpal ligament and collateral ligaments emerge. In stage 23, the articular disc, radiocarpal and ulnocarpal ligaments and deep palmar arterial arch become visible. Radiate carpal and interosseous ligaments appear in week 9, and in week 10, dorsal radiocarpal ligament and articular capsule are evident. Finally, synovial membrane is observed in week 13. We have performed a complete analysis of the morphogenesis of the structures of the human wrist joint. Our results present new data on nervous and arterial elements and provide the basis for further investigations on anatomical pathology, comparative morphology and evolutionary anthropology. PMID:22428933

Checklist of Library Building Design Considerations. Fourth Edition.

ERIC Educational Resources Information Center

Sannwald, William W.

This checklist serves as a guide during various stages of a library design process to help ensure that all needed spaces and functions are included, to help enable the evaluation of existing library spaces as part of a library's needs assessment process, and to help provide data and support to the library in presentations that might be made to…

Manualization of Occupational Therapy Using Ayres Sensory Integration® for Autism.

PubMed

Hunt, Joanne; van Hooydonk, Elke; Faller, Patricia; Mailloux, Zoe; Schaaf, Roseann

2017-07-01

This article reports on the development of a Stage 3 manual (following pilot effectiveness study) for implementing occupational therapy using Ayres Sensory Integration® (OT/ASI) for children with autism spectrum disorders to enhance participation in daily occupations. Three stakeholder groups were surveyed to aid in translation of manual from research to practice (i.e., Stage 3 manual) and an expert consensus meeting was held to finalize recommendations. Data indicated that the manuals usability could be improved by including a section on frequently encountered problems and solutions, and by including video case examples. Also recommended were greater chapter uniformity, improved clarity of forms and charts, and inclusion of a glossary. Changes were made and subject to expert review and consensus using modified Delphi process. The Stage 3 manual has been rigorously vetted and is ready for practice and research replication.

Optimal synthesis and design of the number of cycles in the leaching process for surimi production.

PubMed

Reinheimer, M Agustina; Scenna, Nicolás J; Mussati, Sergio F

2016-12-01

Water consumption required during the leaching stage in the surimi manufacturing process strongly depends on the design and the number and size of stages connected in series for the soluble protein extraction target, and it is considered as the main contributor to the operating costs. Therefore, the optimal synthesis and design of the leaching stage is essential to minimize the total annual cost. In this study, a mathematical optimization model for the optimal design of the leaching operation is presented. Precisely, a detailed Mixed Integer Nonlinear Programming (MINLP) model including operating and geometric constraints was developed based on our previous optimization model (NLP model). Aspects about quality, water consumption and main operating parameters were considered. The minimization of total annual costs, which considered a trade-off between investment and operating costs, led to an optimal solution with lesser number of stages (2 instead of 3 stages) and higher volumes of the leaching tanks comparing with previous results. An analysis was performed in order to investigate how the optimal solution was influenced by the variations of the unitary cost of fresh water, waste treatment and capital investment.

VIIRS day-night band gain and offset determination and performance

NASA Astrophysics Data System (ADS)

Geis, J.; Florio, C.; Moyer, D.; Rausch, K.; De Luccia, F. J.

2012-09-01

On October 28th, 2011, the Visible-Infrared Imaging Radiometer Suite (VIIRS) was launched on-board the Suomi National Polar-orbiting Partnership (NPP) spacecraft. The instrument has 22 spectral bands: 14 reflective solar bands (RSB), 7 thermal emissive bands (TEB), and a Day Night Band (DNB). The DNB is a panchromatic, solar reflective band that provides visible through near infrared (IR) imagery of earth scenes with radiances spanning 7 orders of magnitude. In order to function over this large dynamic range, the DNB employs a focal plane array (FPA) consisting of three gain stages: the low gain stage (LGS), the medium gain stage (MGS), and the high gain stage (HGS). The final product generated from a DNB raw data record (RDR) is a radiance sensor data record (SDR). Generation of the SDR requires accurate knowledge of the dark offsets and gain coefficients for each DNB stage. These are measured on-orbit and stored in lookup tables (LUT) that are used during ground processing. This paper will discuss the details of the offset and gain measurement, data analysis methodologies, the operational LUT update process, and results to date including a first look at trending of these parameters over the early life of the instrument.

Two-Stage Categorization in Brand Extension Evaluation: Electrophysiological Time Course Evidence

PubMed Central

Wang, Xiaoyi

2014-01-01

A brand name can be considered a mental category. Similarity-based categorization theory has been used to explain how consumers judge a new product as a member of a known brand, a process called brand extension evaluation. This study was an event-related potential study conducted in two experiments. The study found a two-stage categorization process reflected by the P2 and N400 components in brand extension evaluation. In experiment 1, a prime–probe paradigm was presented in a pair consisting of a brand name and a product name in three conditions, i.e., in-category extension, similar-category extension, and out-of-category extension. Although the task was unrelated to brand extension evaluation, P2 distinguished out-of-category extensions from similar-category and in-category ones, and N400 distinguished similar-category extensions from in-category ones. In experiment 2, a prime–probe paradigm with a related task was used, in which product names included subcategory and major-category product names. The N400 elicited by subcategory products was more significantly negative than that elicited by major-category products, with no salient difference in P2. We speculated that P2 could reflect the early low-level and similarity-based processing in the first stage, whereas N400 could reflect the late analytic and category-based processing in the second stage. PMID:25438152

Treatment stage associated changes in cellular and molecular microbial markers during the production of drinking water at the Vansjø water works.

PubMed

Charnock, Colin; Otterholt, Eli; Nordlie, Anne-Lise

2015-09-15

The production of a drinking water that meets current aesthetic, microbiological and chemical standards, generally requires a combination of mechanical purification and disinfection in a multi-component treatment chain. Treatment choices and optimisation of water processing is best informed by using markers (including microbiological parameters) which indicate how each stage contributes to the production of the potable water. The present study combines culture-based and a number of culture-independent analyses to indicate what is happening at each stage of a state-of-the-art water treatment chain at Vansjø near the city of Moss in Norway. We show that particularly clarification with flotation and post-chlorination have profound and positive effects on water quality with respect to the removal and inactivation of microbes. Post-chlorination achieved better disinfection of the water than UV-treatment and was of paramount importance, as the penultimate step filtration through granular activated shed microbes to the water. Cloning and sequencing showed that some clones present in the raw water were detected at all stages in the treatment process, perhaps providing examples of microbes breaching physically all barriers in the treatment process. Results from the study should be useful in the improvement and maintenance of the treatment process at the Vansjø plant and others. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of a New Remote Handling Design for High Throughput Annular Centrifugal Contactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

David H. Meikrantz; Troy G. Garn; Jack D. Law

2009-09-01

Advanced designs of nuclear fuel recycling plants are expected to include more ambitious goals for aqueous based separations including; higher separations efficiency, high-level waste minimization, and a greater focus on continuous processes to minimize cost and footprint. Therefore, Annular Centrifugal Contactors (ACCs) are destined to play a more important role for such future processing schemes. Previous efforts defined and characterized the performance of commercial 5 cm and 12.5 cm single-stage ACCs in a “cold” environment. The next logical step, the design and evaluation of remote capable pilot scale ACCs in a “hot” or radioactive environment was reported earlier. This reportmore » includes the development of remote designs for ACCs that can process the large throughput rates needed in future nuclear fuel recycling plants. Novel designs were developed for the remote interconnection of contactor units, clean-in-place and drain connections, and a new solids removal collection chamber. A three stage, 12.5 cm diameter rotor module has been constructed and evaluated for operational function and remote handling in highly radioactive environments. This design is scalable to commercial CINC ACC models from V-05 to V-20 with total throughput rates ranging from 20 to 650 liters per minute. The V-05R three stage prototype was manufactured by the commercial vendor for ACCs in the U.S., CINC mfg. It employs three standard V-05 clean-in-place (CIP) units modified for remote service and replacement via new methods of connection for solution inlets, outlets, drain and CIP. Hydraulic testing and functional checks were successfully conducted and then the prototype was evaluated for remote handling and maintenance suitability. Removal and replacement of the center position V-05R ACC unit in the three stage prototype was demonstrated using an overhead rail mounted PaR manipulator. This evaluation confirmed the efficacy of this innovative design for interconnecting and cleaning individual stages while retaining the benefits of commercially reliable ACC equipment for remote applications in the nuclear industry. Minor modifications and suggestions for improved manual remote servicing by the remote handling specialists were provided but successful removal and replacement was demonstrated in the first prototype.« less

The fatty acid biosynthesis enzyme FabI plays a key role in the development of liver-stage malarial parasites.

PubMed

Yu, Min; Kumar, T R Santha; Nkrumah, Louis J; Coppi, Alida; Retzlaff, Silke; Li, Celeste D; Kelly, Brendan J; Moura, Pedro A; Lakshmanan, Viswanathan; Freundlich, Joel S; Valderramos, Juan-Carlos; Vilcheze, Catherine; Siedner, Mark; Tsai, Jennifer H-C; Falkard, Brie; Sidhu, Amar Bir Singh; Purcell, Lisa A; Gratraud, Paul; Kremer, Laurent; Waters, Andrew P; Schiehser, Guy; Jacobus, David P; Janse, Chris J; Ager, Arba; Jacobs, William R; Sacchettini, James C; Heussler, Volker; Sinnis, Photini; Fidock, David A

2008-12-11

The fatty acid synthesis type II pathway has received considerable interest as a candidate therapeutic target in Plasmodium falciparum asexual blood-stage infections. This apicoplast-resident pathway, distinct from the mammalian type I process, includes FabI. Here, we report synthetic chemistry and transfection studies concluding that Plasmodium FabI is not the target of the antimalarial activity of triclosan, an inhibitor of bacterial FabI. Disruption of fabI in P. falciparum or the rodent parasite P. berghei does not impede blood-stage growth. In contrast, mosquito-derived, FabI-deficient P. berghei sporozoites are markedly less infective for mice and typically fail to complete liver-stage development in vitro. This defect is characterized by an inability to form intrahepatic merosomes that normally initiate blood-stage infections. These data illuminate key differences between liver- and blood-stage parasites in their requirements for host versus de novo synthesized fatty acids, and create new prospects for stage-specific antimalarial interventions.

[Structure and ultrastructure of the ovary of Cichlasoma urophthalmus (Osteichthyes: Cichlidae)].

PubMed

Viedma, Rubí; Franco, Jonathan; Bedia, Carlos; Guedea Fernández, Guadalupe; Villa Zevallos, Héctor Barrera; Barrera Escorcia, Héctor

2011-06-01

The study of the normal development, differentiation, structure and function of various components of developing follicles in the ovaries of numerous fish species have been a consistent focus of comparative reproduction. The structural and ultrastructural features of gonads from Cichlasoma urophthalmus have received scarce attention. In this work, we realized a descriptive study of female gonads of Cichlasoma urophthalmus. A total of 40 samples were collected in the Veracruz Alvarado Lagoon, Mexico in 2007-2008 period including the windy, dry and rainy seasons. Female gonads were extracted and a portion was fixed in 4% formaldehyde for treatment for routine histology hematoxylin and eosin (HE) and another part was processed for transmission electron microscopy (TEM). The gonads were fixed in 3% glutaraldehyde and 2% osmium tetroxide, followed by dehydrated in ethanol 50%, 70%, 80%, 95% and 100% for inclusion in Epon, thin sections were then prepared and were contrasted with lead citrate and uranyl acetate. The process of oocyte development can be divided into five distinct stages (formation of oocytes from oogonia, primary growth, lipid stage, vitellogenesis and maturation). In this work, we found that the primary growth stage is characterized by intense RNA synthesis and the differentiation of the vitelline envelope. Secondary growth starts with the accumulation of lipid droplets in the oocyte cytoplasm (lipid stage), which is then followed by massive uptake and processing of proteins into yolk platelets (vitellogenic stage). During the maturation stage, the lipid inclusions coalesce into a single oil droplet, and hydrolysis of the yolk platelets leads to the formation of a homogeneous mass of fluid yolk in mature eggs. In conclusion, further studies should elucidate structure and ultrastructural changes in the ovarian follicular components, in C. urophthalmus during different stages of oocyte growth.

The Masterson Approach with play therapy: a parallel process between mother and child.

PubMed

Mulherin, M A

2001-01-01

This paper discusses a case in which the Masterson Approach was used with play therapy to treat a child with a developing personality disorder. It describes the parallel progression of the child and mother in adjunct therapy throughout a six-year period. The unique value of the Masterson Approach is that it provides the therapist with a framework and tool to diagnose and treat a child during the dynamic process of play. The case describes the mother-child dyad throughout therapy. It traces their parallel processes that involve separation, individuation, rapprochement, and the recovery of real self-capacities. Each stage of treatment is described, including verbal interventions. The child's internal affective state and intrapsychic structure during the various stages of treatment are illustrated by representative pictures.

Reading Aloud: Discrete Stage(s) Redux

PubMed Central

Robidoux, Serje; Besner, Derek

2017-01-01

Interactive activation accounts of processing have had a broad and deep influence on cognitive psychology, particularly so in the context of computational accounts of reading aloud at the single word level. Here we address the issue of whether such a framework can simulate the joint effects of stimulus quality and word frequency (which have been shown to produce both additive and interactive effects depending on the context). We extend previous work on this question by considering an alternative implementation of a stimulus quality manipulation, and the role of interactive activation. Simulations with a version of the Dual Route Cascaded model (a model with interactive activation dynamics along the lexical route) demonstrate that the model is unable to simulate the entire pattern seen in human performance. We discuss how a hybrid interactive activation model that includes some context dependent staged processing could accommodate these data. PMID:28289395

Production and recovery of monosaccharides from lignocellulose hot water extracts in a pulp mill biorefinery.

PubMed

Sainio, Tuomo; Kallioinen, Mari; Nakari, Olli; Mänttäri, Mika

2013-05-01

Processing of hemicelluloses obtained with pressurized hot water extraction (PHWE) from Scots pine to monosaccharides and other chemicals was investigated experimentally. A process scheme consisting of ultrafiltration, acid hydrolysis, and chromatographic separation was proposed and evaluated. A two-stage ultrafiltration was found necessary for efficient fractionation of the wood extract. It was shown that the monosaccharides can be released from a concentrated hemicellulose fraction with sulfuric acid hydrolysis without a significant loss of yield due to decomposition of monosaccharides. Acid hydrolysate was successfully fractionated with ion exchange chromatography and the hydrolysis acid was recovered for reuse. The product fractions obtained include polyphenols and high molar mass hemicelluloses (from UF stage 1), arabinose (from UF stage 2), as well as acetic acid and a mixture of monosaccharides (xylose, galactose, mannose, glucose) from chromatography. Copyright © 2012 Elsevier Ltd. All rights reserved.

Making Me Feel Comfortable: Developing Trust in the Nurse for Mexican Americans.

PubMed

Jones, Sharon M

2015-11-01

Trust (confianza) is an important component of patient-centered care and culturally competent care and a major element in the Hispanic culture. The aim of this study was to conceptualize the process of the development of interpersonal trust by hospitalized patients in their nurses. Using the grounded theory method, English-speaking Mexican American patients (N = 22) were interviewed. The core category was Making Me Feel Comfortable. The cyclical process included a beginning stage (Having Needs, Relying on the Nurse), middle stage (Coming Across to Me, Taking Care of Me, Connecting), and end point (Feeling Confianza) with two outcomes (Confiding in the Nurse, Taking Away the Negative). Anytime there was a negative element during the middle stage, this element halted any further development of trust with the nurse. Unique findings were related to Hispanic cultural values of familism and personalismo. The findings have implications which impact patient safety and quality care. © The Author(s) 2014.

Effect of the bread-making process on zearalenone levels.

PubMed

Heidari, Sara; Milani, Jafar; Nazari, Seyed Saman Seyed Jafar

2014-01-01

The effects of the bread-making process including fermentation with Saccharomyces cerevisiae and lactic acid bacteria (Lactobacillus casei, Lactobacillus rhamnosus, Lactobacillus acidophilus and Lactobacillus fermentum) and baking at 200°C on zearalenone (ZEA) levels were investigated. Standard solutions of ZEA were added to flour and then loaves of bread were prepared. Sourdough and three types of yeast including active dry yeast, instant dry yeast and compressed yeast were used for the fermentation of dough. ZEA levels in flour, dough and bread were determined by HPLC with fluorescence detection after extraction and clean-up on an immunoaffinity column. The highest reduction in levels of ZEA was found in the first fermentation (first proof), while the lowest reduction was observed in the baking stage. In addition, the results showed that compressed yeast had the maximum reduction potential on ZEA levels even at the baking stage.

Membrane thickening aerobic digestion processes.

PubMed

Woo, Bryen

2014-01-01

Sludge management accounts for approximately 60% of the total wastewater treatment plant expenditure and laws for sludge disposal are becoming increasingly stringent, therefore much consideration is required when designing a solids handling process. A membrane thickening aerobic digestion process integrates a controlled aerobic digestion process with pre-thickening waste activated sludge using membrane technology. This process typically features an anoxic tank, an aerated membrane thickener operating in loop with a first-stage digester followed by second-stage digestion. Membrane thickening aerobic digestion processes can handle sludge from any liquid treatment process and is best for facilities obligated to meet low total phosphorus and nitrogen discharge limits. Membrane thickening aerobic digestion processes offer many advantages including: producing a reusable quality permeate with minimal levels of total phosphorus and nitrogen that can be recycled to the head works of a plant, protecting the performance of a biological nutrient removal liquid treatment process without requiring chemical addition, providing reliable thickening up to 4% solids concentration without the use of polymers or attention to decanting, increasing sludge storage capacities in existing tanks, minimizing the footprint of new tanks, reducing disposal costs, and providing Class B stabilization.

Framework for culturally competent decisionmaking in child welfare.

PubMed

Cohen, Elena P

2003-01-01

This article provides a framework to understand the cultural, social, political, and economic factors that affect decisionmaking when working with ethnically and racially diverse families in the child welfare system. The article describes external factors affecting the decisionmaking process, including community environment, agency structure, and family characteristics. It then reviews the core stages of the casework process, describing key decisions during intake, assessment, service planning, implementation, evaluation, and closure. Although the framework is based on casework process in the child welfare system, it can be adapted to other child-serving systems, including education, mental health, and juvenile justice.

Development of the 10-11 July 2015 two-stage sequence of multiple emplacements of pyroclastic density currents at Volcán de Colima, México: Insight from associated seismic signals

NASA Astrophysics Data System (ADS)

Zobin, Vyacheslav M.

2018-02-01

The 10-11 July 2015 partial collapses of the lava dome in the crater of Volcán de Colima, México, were accompanied by a sequence of two-stage multiple PDCs, separated by a 15-h interval, with a total bulk volume of 14.2 × 106 m3 of fragmentary material and runout distances reaching 9.1 and 10.3 km, respectively (Reyes-Dávila et al., 2016). Broad-band seismic signals, associated with the PDCs and recorded at seismic station EZ5 installed at a distance of 4 km from the crater, were used for analysis of the 20-h eruption process. This process included two stages of the multiple PDCs emplacements, two one-hour periods of preliminary events to each of the stages, and the inter-stage period. Analysis of seismic signals allowed us to identify the types of volcanic events composing this eruption episode and estimate their quantitative characteristics and spectral parameters of generated seismic signals. It was shown that the seismic signals produced by PDCs emplacements, recorded during the two stages, were characterized by different characteristics. The second stage PDCs had radiated greater seismic energy than the PDCs emplaced during the first stage. Spectral analysis of the seismic signals, produced by PDCs, indicates a clearly separation in frequency content at 1.95 Hz between the higher-frequency events of the first stage and the lower-frequency events of the second stage of the PDCs emplacements. The obtained difference in the spectral contents of the seismic signals, produced by the movement of two multiple PDCs, may be supposed as a consequence of the proposed relative difference in the volumes of the PDCs of two multiple sequences due to a difference in the level of radiated seismic energy and a change in bottom conditions of the ravines during their passing along the ravines. Results of seismic study were used in discussion of the nature of the two-stage eruptive process.

[The relationship between fat intake behavior and psychological impact factor in adolescent].

PubMed

Fang, Mingzhu; Zhang, Jie; Wu, Xian; Huang, Xianhong; Gu, Fang; Qu, Xuping; Xu, Liangwen

2015-02-01

To learn the dietary fat intake behavior status and influencing psychological factors in teenagers. According to the multi-stage stratified cluster sampling method, students were recruited from middle and high schools in Hangzhou, Wuhan and Xi'an from March to May, 2012. Chinese version of adolescent dietary fat intake behavior of psychological measurement scales was utilized in field investigations with 3 448 effective questionnaires. Under the transtheoretical model, the status quo of teenagers fat intake behavior was analyzed and it shows the relationship between stages and psychological variables, including strategy of change, decision balance and self-efficacy. In the 3 448 participants, the proportion of girls were 52.4% (1 806/3 448) and boys were 47.6% (1 642/3 448), while the mean age was (14.85 ± 1.46). There are significant differences among distributed stages of behavior change, grouped by gender, grade and region (χ(2) values were 33.59, 20.53, 27.92, P < 0.001). In different gender groups, the number of boys in precontemplation came to the first and accounted for 24.2% (438/1 806), and the number of girls were more in contemplation and preparation stage, which accounted for 49.5% (813/1 642), and it was the least both in the action stage with the ratio 12.1% (218/1 806) and 14.7% (241/1 642) respectively; in different grade groups, the numbers of student in middle school and high school were the largest in contemplation and precontemplation stage, accounted for 24.9% (494/1 986) and 23.4% (343/1 462); and among different regions, the proportion in precontemplation, contemplation and preparation stage was not a few, and this ratio in Hangzhou, Wuhan, Xi'an area was 70.6% (801/1 135), 61.7% (649/1 052) and 68.8% (867/1 261), respectively. The number in action stage was the least of all, which were 144, 147, 168, respectively. Ordinal logistic mode showed that the four variables, including the scores of process of change, decision balance (pros), decision balance (cons) and self-efficacy, were factors which significantly affected the stages of behavior change, which showed a significant difference (F values were 155.12, 19.86, 44.59, 94.27, P < 0.001) in different stages. From precontemplation stage to action stage, the score of the process of change, decision balance (pros) and self-efficacy showed an upward trend, and achieved the highest score in the action stage (from 32.6 ± 12.8, 8.4 ± 2.9, 19.7 ± 6.9 to 48.4 ± 12.6, 10.1 ± 2.5, 25.9 ± 6.9, respectively); contrarily, the decision balance (cons) decreased with the development of behavioral stage (from 14.7 ± 4.4 to 12.2 ± 3.9). Post hoc comparison also found that the score of process of change, decision balance (pros) and self-efficacy after action stages were higher than those before action, while the score of decisional balance (cons) in the precontemplation stage was higher than that in the other 4 stages. Fat intake behavior in teenagers showed different stages, whose psychological factors had significant influences, with decision balance (pros) hindered the progress of stages of behavior change, while other three factors played a positive role.

Improvement in visual search with practice: mapping learning-related changes in neurocognitive stages of processing.

PubMed

Clark, Kait; Appelbaum, L Gregory; van den Berg, Berry; Mitroff, Stephen R; Woldorff, Marty G

2015-04-01

Practice can improve performance on visual search tasks; the neural mechanisms underlying such improvements, however, are not clear. Response time typically shortens with practice, but which components of the stimulus-response processing chain facilitate this behavioral change? Improved search performance could result from enhancements in various cognitive processing stages, including (1) sensory processing, (2) attentional allocation, (3) target discrimination, (4) motor-response preparation, and/or (5) response execution. We measured event-related potentials (ERPs) as human participants completed a five-day visual-search protocol in which they reported the orientation of a color popout target within an array of ellipses. We assessed changes in behavioral performance and in ERP components associated with various stages of processing. After practice, response time decreased in all participants (while accuracy remained consistent), and electrophysiological measures revealed modulation of several ERP components. First, amplitudes of the early sensory-evoked N1 component at 150 ms increased bilaterally, indicating enhanced visual sensory processing of the array. Second, the negative-polarity posterior-contralateral component (N2pc, 170-250 ms) was earlier and larger, demonstrating enhanced attentional orienting. Third, the amplitude of the sustained posterior contralateral negativity component (SPCN, 300-400 ms) decreased, indicating facilitated target discrimination. Finally, faster motor-response preparation and execution were observed after practice, as indicated by latency changes in both the stimulus-locked and response-locked lateralized readiness potentials (LRPs). These electrophysiological results delineate the functional plasticity in key mechanisms underlying visual search with high temporal resolution and illustrate how practice influences various cognitive and neural processing stages leading to enhanced behavioral performance. Copyright © 2015 the authors 0270-6474/15/355351-09$15.00/0.

Reward processing in neurodegenerative disease

PubMed Central

Perry, David C.; Kramer, Joel H.

2015-01-01

Representation of reward value involves a distributed network including cortical and subcortical structures. Because neurodegenerative illnesses target specific anatomic networks that partially overlap with the reward circuit they would be predicted to have distinct impairments in reward processing. This review presents the existing evidence of reward processing changes in neurodegenerative diseases including mild cognitive impairment, Alzheimer's disease, frontotemporal dementia, amyotrophic lateral sclerosis, Parkinson's disease, and Huntington's disease, as well as in healthy aging. Carefully distinguishing the different aspects of reward processing (primary rewards, secondary rewards, reward-based learning, and reward-based decision-making) and using tasks that differentiate the stages of processing reward will lead to improved understanding of this fundamental process and clarify a contributing cause of behavioral change in these illnesses. PMID:24417286

Plagiarism Detection for Indonesian Language using Winnowing with Parallel Processing

NASA Astrophysics Data System (ADS)

Arifin, Y.; Isa, S. M.; Wulandhari, L. A.; Abdurachman, E.

2018-03-01

The plagiarism has many forms, not only copy paste but include changing passive become active voice, or paraphrasing without appropriate acknowledgment. It happens on all language include Indonesian Language. There are many previous research that related with plagiarism detection in Indonesian Language with different method. But there are still some part that still has opportunity to improve. This research proposed the solution that can improve the plagiarism detection technique that can detect not only copy paste form but more advance than that. The proposed solution is using Winnowing with some addition process in pre-processing stage. With stemming processing in Indonesian Language and generate fingerprint in parallel processing that can saving time processing and produce the plagiarism result on the suspected document.

Discontinuing Medications: A Novel Approach for Revising the Prescribing Stage of the Medication-Use Process

PubMed Central

Bain, Kevin T.; Holmes, Holly M.; Beers, Mark H.; Maio, Vittorio; Handler, Steven M.; Pauker, Stephen G.

2009-01-01

Thousands of Americans are injured or die each year from adverse drug reactions, many of which are preventable. The burden of harm conveyed by the use of medications is a significant public health problem and, therefore, improving the medication-use process is a priority. Recent and ongoing efforts to improve the medication-use process focus primarily on improving medication prescribing, and not much emphasis has been put on improving medication discontinuation. A formalized approach for rationally discontinuing medications is a necessary antecedent to improving medication safety and improving the nation’s quality of care. This paper proposes a conceptual framework for revising the prescribing stage of the medication-use process to include discontinuing medications. This framework has substantial practice and research implications, especially for the clinical care of older persons, who are particularly susceptible to the adverse effects of medications. PMID:18771457

The Silkworm (Bombyx mori) microRNAs and Their Expressions in Multiple Developmental Stages

PubMed Central

Luo, Qibin; Cai, Yimei; Lin, Wen-chang; Chen, Huan; Yang, Yue; Hu, Songnian; Yu, Jun

2008-01-01

Background MicroRNAs (miRNAs) play crucial roles in various physiological processes through post-transcriptional regulation of gene expressions and are involved in development, metabolism, and many other important molecular mechanisms and cellular processes. The Bombyx mori genome sequence provides opportunities for a thorough survey for miRNAs as well as comparative analyses with other sequenced insect species. Methodology/Principal Findings We identified 114 non-redundant conserved miRNAs and 148 novel putative miRNAs from the B. mori genome with an elaborate computational protocol. We also sequenced 6,720 clones from 14 developmental stage-specific small RNA libraries in which we identified 35 unique miRNAs containing 21 conserved miRNAs (including 17 predicted miRNAs) and 14 novel miRNAs (including 11 predicted novel miRNAs). Among the 114 conserved miRNAs, we found six pairs of clusters evolutionarily conserved cross insect lineages. Our observations on length heterogeneity at 5′ and/or 3′ ends of nine miRNAs between cloned and predicted sequences, and three mature forms deriving from the same arm of putative pre-miRNAs suggest a mechanism by which miRNAs gain new functions. Analyzing development-related miRNAs expression at 14 developmental stages based on clone-sampling and stem-loop RT PCR, we discovered an unusual abundance of 33 sequences representing 12 different miRNAs and sharply fluctuated expression of miRNAs at larva-molting stage. The potential functions of several stage-biased miRNAs were also analyzed in combination with predicted target genes and silkworm's phenotypic traits; our results indicated that miRNAs may play key regulatory roles in specific developmental stages in the silkworm, such as ecdysis. Conclusions/Significance Taking a combined approach, we identified 118 conserved miRNAs and 151 novel miRNA candidates from the B. mori genome sequence. Our expression analyses by sampling miRNAs and real-time PCR over multiple developmental stages allowed us to pinpoint molting stages as hotspots of miRNA expression both in sorts and quantities. Based on the analysis of target genes, we hypothesized that miRNAs regulate development through a particular emphasis on complex stages rather than general regulatory mechanisms. PMID:18714353

Subsystem Hazard Analysis Methodology for the Ares I Upper Stage Source Controlled Items

NASA Technical Reports Server (NTRS)

Mitchell, Michael S.; Winner, David R.

2010-01-01

This article describes processes involved in developing subsystem hazard analyses for Source Controlled Items (SCI), specific components, sub-assemblies, and/or piece parts, of the NASA ARES I Upper Stage (US) project. SCIs will be designed, developed and /or procured by Boeing as an end item or an off-the-shelf item. Objectives include explaining the methodology, tools, stakeholders and products involved in development of these hazard analyses. Progress made and further challenges in identifying potential subsystem hazards are also provided in an effort to assist the System Safety community in understanding one part of the ARES I Upper Stage project.

Heat pump apparatus

DOEpatents

Nelson, Paul A.; Horowitz, Jeffrey S.

1983-01-01

A heat pump apparatus including a compact arrangement of individual tubular reactors containing hydride-dehydride beds in opposite end sections, each pair of beds in each reactor being operable by sequential and coordinated treatment with a plurality of heat transfer fluids in a plurality of processing stages, and first and second valves located adjacent the reactor end sections with rotatable members having multiple ports and associated portions for separating the hydride beds at each of the end sections into groups and for simultaneously directing a plurality of heat transfer fluids to the different groups. As heat is being generated by a group of beds, others are being regenerated so that heat is continuously available for space heating. As each of the processing stages is completed for a hydride bed or group of beds, each valve member is rotated causing the heat transfer fluid for the heat processing stage to be directed to that bed or group of beds. Each of the end sections are arranged to form a closed perimeter and the valve member may be rotated repeatedly about the perimeter to provide a continuous operation. Both valves are driven by a common motor to provide a coordinated treatment of beds in the same reactors. The heat pump apparatus is particularly suitable for the utilization of thermal energy supplied by solar collectors and concentrators but may be used with any source of heat, including a source of low-grade heat.

Physical activity in patients with advanced-stage cancer: a systematic review of the literature.

PubMed

Albrecht, Tara A; Taylor, Ann Gill

2012-06-01

The importance of physical activity for chronic disease prevention and management has become generally well accepted. The number of research interventions and publications examining the benefits of physical activity for patients with cancer has been rising steadily. However, much of that research has focused on the impact of physical activity either prior to or early in the cancer diagnosis, treatment, and survivorship process. Research focusing on the effects of physical activity, specifically for patients with advanced-stage cancer and poorer prognostic outcomes, has been addressed only recently. The purpose of this article is to examine the state of the science for physical activity in the advanced-stage disease subset of the cancer population. Exercise in a variety of intensities and forms, including yoga, walking, biking, and swimming, has many health benefits for people, including those diagnosed with cancer. Research has shown that, for people with cancer (including advanced-stage cancer), exercise can decrease anxiety, stress, and depression while improving levels of pain, fatigue, shortness of breath, constipation, and insomnia. People diagnosed with cancer should discuss with their oncologist safe, easy ways they can incorporate exercise into their daily lives.

Mechanisms important to later stages of streamer system development

NASA Astrophysics Data System (ADS)

Lehtinen, N. G.; Carlson, B.; Kochkin, P.; Østgaard, N.

2017-12-01

Typical streamer modeling focuses on the propagation of the streamer head and thus neglects processes such as electron detachment, electron energy relaxation, and thermalization of the electron energy distribution. These mechanisms, however, may become important at later stages of streamer system development, in particular following streamer collisions. We present a model of a later-stage streamer system development which includes these processes. A linear analysis suggests that these processes under some conditions can lead to new effects, such as excitation of waves similar to striations in the positive column of a glow discharge. Such instabilities do not occur if these mechanisms are neglected under the same conditions, although previous modeling suggested existence of wave-like phenomena during the streamer propagation [Luque et al, 2016, doi:10.1002/2015JA022234]. In the sea-level pressure air, the obtained striation-like waves may manifest as very high frequency range (>10 MHz) oscillations in plasma parameters and may have been detected in the electrode current and electromagnetic radiation measurements during laboratory spark experiments. We discuss whether the longitudinal electric field in such waves can efficiently transfer energy to charged particles, because such a process may play a role in production of x-rays.

Methodological proposal for the remediation of a site affected by phosphogypsum deposits

NASA Astrophysics Data System (ADS)

Martínez-Sanchez, M. J.; Perez-Sirvent, C.; Bolivar, J. P.; Garcia-Tenorio, R.

2012-04-01

The accumulation of phosphogysum (PY) produces a well known environmental problems. The proposals for the remediation of these sites require multidisciplinary and very specific studies. Since they cover large areas a sampling design specifically outlined for each case is necessary in order the contaminants, transfer pathways and particular processes can be correctly identified. In addition to a suitable sampling of the soil, aquatic medium and biota, appropriate studies of the space-temporal variations by means of control samples are required. Two different stages should be considered: 1.- Diagnostic stage This stage includes preliminary studies, identification of possible sources of radiosotopes, design of the appropriate sampling plan, hydrogeological study, characterization and study of the space-temporal variability of radioisotopes and other contaminants, as well as the risk assessement for health and ecosystems, that depends on the future use of the site. 2.- Remediation proposal stage It comprises the evaluation and comparison of the different procedures for the decontamination/remediation, including models experiments at the laboratory. To this respect, the preparation and detailed study of a small scale pilot project is a task of particular relevance. In this way the suitability of the remediating technology can be checked, and its performance optimized. These two stages allow a technically well-founded proposal to be presented to the Organisms or Institutions in charge of the problem and facilitate decision-making. It both stages be included in a social communication campaign in order the final proposal be accepted by stakeholders.

International and Interdisciplinary Identification of Health Care Transition Outcomes.

PubMed

Fair, Cynthia; Cuttance, Jessica; Sharma, Niraj; Maslow, Gary; Wiener, Lori; Betz, Cecily; Porter, Jerlym; McLaughlin, Suzanne; Gilleland-Marchak, Jordan; Renwick, Amy; Naranjo, Diana; Jan, Sophia; Javalkar, Karina; Ferris, Maria

2016-03-01

There is a lack of agreement on what constitutes successful outcomes for the process of health care transition (HCT) among adolescent and young adults with special health care needs. To present HCT outcomes identified by a Delphi process with an interdisciplinary group of participants. A Delphi method involving 3 stages was deployed to refine a list of HCT outcomes. This 18-month study (from January 5, 2013, of stage 1 to July 3, 2014, of stage 3) included an initial literature search, expert interviews, and then 2 waves of a web-based survey. On this survey, 93 participants from outpatient, community-based, and primary care clinics rated the importance of the top HCT outcomes identified by the Delphi process. Analyses were performed from July 5, 2014, to December 5, 2014. Health care transition outcomes of adolescents and young adults with special health care needs. Importance ratings of identified HCT outcomes rated on a Likert scale from 1 (not important) to 9 (very important). The 2 waves of surveys included 117 and 93 participants as the list of outcomes was refined. Transition outcomes were refined by the 3 waves of the Delphi process, with quality of life being the highest-rated outcome with broad agreement. The 10 final outcomes identified included individual outcomes (quality of life, understanding the characteristics of conditions and complications, knowledge of medication, self-management, adherence to medication, and understanding health insurance), health services outcomes (attending medical appointments, having a medical home, and avoidance of unnecessary hospitalization), and a social outcome (having a social network). Participants indicated that different outcomes were likely needed for individuals with cognitive disabilities. Quality of life is an important construct relevant to HCT. Future research should identify valid measures associated with each outcome and further explore the role that quality of life plays in the HCT process. Achieving consensus is a critical step toward the development of reliable and objective comparisons of HCT outcomes across clinical conditions and care delivery locations.

Assembly of 5.5-Meter Diameter Developmental Barrel Segments for the Ares I Upper Stage

NASA Technical Reports Server (NTRS)

Carter, Robert W.

2011-01-01

Full scale assembly welding of Ares I Upper Stage 5.5-Meter diameter cryogenic tank barrel segments has been performed at the Marshall Space Flight Center (MSFC). One full-scale developmental article produced under the Ares 1 Upper Stage project is the Manufacturing Demonstration Article (MDA) Barrel. This presentation will focus on the welded assembly of this barrel section, and associated lessons learned. Among the MDA articles planned on the Ares 1 Program, the Barrel was the first to be completed, primarily because the process of manufacture from piece parts (barrel panels) utilized the most mature friction stir process planned for use on the Ares US program: Conventional fixed pin Friction Stir Welding (FSW). This process is in use on other space launch systems, including the Shuttle s External Tank, the Delta IV common booster core, the Delta II, and the Atlas V rockets. The goals for the MDA Barrel development were several fold: 1) to prove out Marshall Space Flight Center s new Vertical Weld Tool for use in manufacture of cylindrical barrel sections, 2) to serve as a first run for weld qualification to a new weld specification, and 3) to provide a full size cylindrical section for downstream use in precision cleaning and Spray-on Foam Insulation development. The progression leading into the welding of the full size barrel included sub scale panel welding, subscale cylinder welding, a full length confidence weld, and finally, the 3 seamed MDA barrel processing. Lessons learned on this MDA program have been carried forward into the production tooling for the Ares 1 US Program, and in the use of the MSFC VWT in processing other large scale hardware, including two 8.4 meter diameter Shuttle External Tank barrel sections that are currently being used in structural analysis to validate shell buckling models.

A step-by-step translation of evidence into a psychosocial intervention for everyday activities in dementia: a focus group study.

PubMed

Giebel, Clarissa M; Challis, David; Hooper, Nigel M; Ferris, Sally

2018-03-01

In order to increase the efficacy of psychosocial interventions in dementia, a step-by-step process translating evidence and public engagement should be adhered to. This paper describes such a process by involving a two-stage focus group with people with dementia (PwD), informal carers, and staff. Based on previous evidence, general aspects of effective interventions were drawn out. These were tested in the first stage of focus groups, one with informal carers and PwD and one with staff. Findings from this stage helped shape the intervention further specifying its content. In the second stage, participants were consulted about the detailed components. The extant evidence base and focus groups helped to identify six practical and situation-specific elements worthy of consideration in planning such an intervention, including underlying theory and personal motivations for participation. Carers, PwD, and staff highlighted the importance of rapport between practitioners and PwD prior to commencing the intervention. It was also considered important that the intervention would be personalised to each individual. This paper shows how valuable public involvement can be to intervention development, and outlines a process of public involvement for future intervention development. The next step would be to formally test the intervention.

Randomized Trial of a Lifestyle Physical Activity Intervention for Breast Cancer Survivors: Effects on Transtheoretical Model Variables.

PubMed

Scruggs, Stacie; Mama, Scherezade K; Carmack, Cindy L; Douglas, Tommy; Diamond, Pamela; Basen-Engquist, Karen

2018-01-01

This study examined whether a physical activity intervention affects transtheoretical model (TTM) variables that facilitate exercise adoption in breast cancer survivors. Sixty sedentary breast cancer survivors were randomized to a 6-month lifestyle physical activity intervention or standard care. TTM variables that have been shown to facilitate exercise adoption and progress through the stages of change, including self-efficacy, decisional balance, and processes of change, were measured at baseline, 3 months, and 6 months. Differences in TTM variables between groups were tested using repeated measures analysis of variance. The intervention group had significantly higher self-efficacy ( F = 9.55, p = .003) and perceived significantly fewer cons of exercise ( F = 5.416, p = .025) at 3 and 6 months compared with the standard care group. Self-liberation, counterconditioning, and reinforcement management processes of change increased significantly from baseline to 6 months in the intervention group, and self-efficacy and reinforcement management were significantly associated with improvement in stage of change. The stage-based physical activity intervention increased use of select processes of change, improved self-efficacy, decreased perceptions of the cons of exercise, and helped participants advance in stage of change. These results point to the importance of using a theory-based approach in interventions to increase physical activity in cancer survivors.

Computer simulations in the high school: students' cognitive stages, science process skills and academic achievement in microbiology

NASA Astrophysics Data System (ADS)

Huppert, J.; Michal Lomask, S.; Lazarowitz, R.

2002-08-01

Computer-assisted learning, including simulated experiments, has great potential to address the problem solving process which is a complex activity. It requires a highly structured approach in order to understand the use of simulations as an instructional device. This study is based on a computer simulation program, 'The Growth Curve of Microorganisms', which required tenth grade biology students to use problem solving skills whilst simultaneously manipulating three independent variables in one simulated experiment. The aims were to investigate the computer simulation's impact on students' academic achievement and on their mastery of science process skills in relation to their cognitive stages. The results indicate that the concrete and transition operational students in the experimental group achieved significantly higher academic achievement than their counterparts in the control group. The higher the cognitive operational stage, the higher students' achievement was, except in the control group where students in the concrete and transition operational stages did not differ. Girls achieved equally with the boys in the experimental group. Students' academic achievement may indicate the potential impact a computer simulation program can have, enabling students with low reasoning abilities to cope successfully with learning concepts and principles in science which require high cognitive skills.

Adaptation and validation of indicators concerning the sterilization process of supplies in Primary Health Care services.

PubMed

Passos, Isis Pienta Batista Dias; Padoveze, Maria Clara; Roseira, Camila Eugênia; de Figueiredo, Rosely Moralez

2015-01-01

to adapt and validate, by expert consensus, a set of indicators used to assess the sterilization process of dental, medical and hospital supplies to be used in PHC services. qualitative methodological study performed in two stages. The first stage included a focal group composed of experts to adapt the indicators to be used in PHC. In the second stage, the indicators were validated using a 4-point Likert scale, which was completed by judges. A Content Validity Index of ≥ 0.75 was considered to show approval of the indicators. the adaptations implemented by the focal group mainly referred to the physical structure, inclusion of dental care professionals, inclusion of chemical disinfection, and replacement of the hot air and moist heat sterilization methods. The validation stage resulted in an index of 0.96, which ranged from 0.90 to 1.00, for the components of the indicators. the judges considered the indicators after adaptation to be validated. Even though there may be differences among items processed around the world, there certainly are common characteristics, especially in countries with economic and cultural environments similar to Brazil. The inclusion of these indicators to assess the safety of healthcare supplies used in PHC services should be considered.

[Soil hydrolase characteristics in late soil-thawing period in subalpine/alpine forests of west Sichuan].

PubMed

Tan, Bo; Wu, Fu-Zhong; Yang, Wan-Qin; Yu, Sheng; Yang, Yu-Lian; Wang, Ao

2011-05-01

Late soil-thawing period is a critical stage connecting winter and growth season. The significant temperature fluctuation at this stage might have strong effects on soil ecological processes. In order to understand the soil biochemical processes at this stage in the subalpine/alpine forests of west Sichuan, soil samples were collected from the representative forests including primary fir forest, fir and birch mixed forest, and secondary fir forest in March 5-April 25, 2009, with the activities of soil invertase, urease, and phosphatase (neutral, acid and alkaline phosphatases) measured. In soil frozen period, the activities of the three enzymes in test forests still kept relatively higher. With the increase of soil temperature, the activities of hydrolases at the early stage of soil-thawing decreased rapidly after a sharp increase, except for neutral phosphatease. Thereafter, there was an increase in the activities of urease and phosphatase. Relative to soil mineral layer, soil organic layer had higher hydrolase activity in late soil-thawing period, and showed more obvious responses to the variation of soil temperature.

Influence of asymmetric magnetic perturbation on the nonlinear evolution of double tearing modes

NASA Astrophysics Data System (ADS)

Xiong, G. Z.; Wang, L.; Li, X. Q.; Liu, H. F.; Tang, C. J.; Huang, J.; Zhang, X.; Wang, X. Q.

2017-06-01

The effects of asymmetric magnetic perturbation on the triggering and evolution of double tearing modes (DTMs) are investigated using nonlinear magnetohydrodynamics simulations in a slab geometry. We find that for reversed magnetic shear plasmas the resistive reconnection process induced by the initial perturbation at one rational surface can drive a new island at the other rational surface with the same mode number. The four typical states of the mode for the time evolution are found, and include: (i) a linear growth stage; (ii) a linear/nonlinear stable stage; (iii) an interactively driving stage; and (iv) a symmetric DTM stage. These differ from previous simulation results. Moreover, nonlinear DTM growth is found to strongly depend on the asymmetric magnetic perturbation, particularly in the early nonlinear phase. The initial perturbation strength scale of island width suggests that the left island enters into a Sweet-Parker growth process when the right island is sufficiently large to effectively drive the other. These results predict that although externally applied magnetic perturbations can suppress the neoclassical tearing mode they can also trigger new instabilities such as asymmetric DTMs.

Processing and Prolonged 500 C Testing of 4H-SiC JFET Integrated Circuits with Two Levels of Metal Interconnect

NASA Technical Reports Server (NTRS)

Spry, David J.; Neudeck, Philip G.; Chen, Liangyu; Lukco, Dorothy; Chang, Carl W.; Beheim, Glenn M.; Krasowski, Michael J.; Prokop, Norman F.

2015-01-01

Complex integrated circuit (IC) chips rely on more than one level of interconnect metallization for routing of electrical power and signals. This work reports the processing and testing of 4H-SiC junction field effect transistor (JFET) prototype ICs with two levels of metal interconnect capable of prolonged operation at 500 C. Packaged functional circuits including 3-and 11-stage ring oscillators, a 4-bit digital to analog converter, and a 4-bit address decoder and random access memory cell have been demonstrated at 500 C. A 3-stage oscillator functioned for over 3000 hours at 500 C in air ambient.

Combined processing of lead concentrates

NASA Astrophysics Data System (ADS)

Kubasov, V. L.; Paretskii, V. M.; Sidorin, G. N.; Travkin, V. F.

2013-06-01

A combined scheme of processing of lead concentrates with the production of pure metallic lead and the important components containing in these concentrates is considered. This scheme includes sulfating roasting of the lead concentrates and two-stage leaching of the formed cinder with the formation of a sulfate solution and lead sulfate. When transformed into a carbonate form, lead sulfate is used for the production of pure metallic lead. Silver, indium, copper, cadmium, nickel, cobalt, and other important components are separately extracted from a solution. At the last stage, zinc is extracted by either extraction followed by electrolytic extraction of a metal or the return of the forming solution of sulfuric acid to cinder leaching.

Waste Management Decision-Making Process During a Homeland Security Incident Response

EPA Pesticide Factsheets

A step-by-step guide on how to make waste management-related decisions including how waste can be minimized, collected and treated, as well as where waste can be sent for staging, storage and final disposal.

28 CFR 541.6 - Mentally ill inmates.

Code of Federal Regulations, 2014 CFR

2014-07-01

... are mentally ill at any stage of the discipline process, you will be examined by mental health staff... evidence presented by mental health staff. ... Discipline Hearing Officer will make this decision based on evidence, including evidence presented by mental...

28 CFR 541.6 - Mentally ill inmates.

Code of Federal Regulations, 2011 CFR

2011-07-01

... are mentally ill at any stage of the discipline process, you will be examined by mental health staff... evidence presented by mental health staff. ... Discipline Hearing Officer will make this decision based on evidence, including evidence presented by mental...

28 CFR 541.6 - Mentally ill inmates.

Code of Federal Regulations, 2012 CFR

2012-07-01

... are mentally ill at any stage of the discipline process, you will be examined by mental health staff... evidence presented by mental health staff. ... Discipline Hearing Officer will make this decision based on evidence, including evidence presented by mental...

28 CFR 541.6 - Mentally ill inmates.

Code of Federal Regulations, 2013 CFR

2013-07-01

... are mentally ill at any stage of the discipline process, you will be examined by mental health staff... evidence presented by mental health staff. ... Discipline Hearing Officer will make this decision based on evidence, including evidence presented by mental...

Dilemmas across different overseas liver transplant stages: Taiwan transplant recipient families' perspectives.

PubMed

Chen, H-M; Hu, R-H; Shih, F-Jong; Shih, F-J

2012-03-01

This study aimed to explore the dilemmas of Taiwanese overseas liver transplant recipient families (OLTRF) across three overseas liver transplant (OLT) stages in Taiwan and Mainland China. An exploratory qualitative method was employed using a purposive sample of OLTRF, who received guided face-to-face, semistructured interviews. Data were subjected to content analysis. Nineteen OLTRF (15 female, 4 male) aged between 29 and 71 years (mean 55.1) for 19 patients with end-stage liver diseases were interviewed. OLT stages including predeparture stage (first stage), stay in China stage (second stage), and reentry to Taiwan stage (third stage). Ten kinds of dilemmas were encountered: (1) unable to get transplantation immediately (first to second stages); (2) dilemma of choosing overseas transplantation (first to second stages); (3) uncertainty about the transplantation outcomes (second to third stages); (4) care pressure (second to third stages); (5) poor diet adaptation (second to third stages); (6) lack of trust in the medical care quality (second stage); (7) worry about not fulfilling family responsibilities (second stage); (8) lack of information (all stages); (9) financial pressure (all stages); and (10) frustration when seeking medical care (all stages). Taiwanese OLTRF's perspectives of their dilemmas through the OLT process were first revealed in this study. Both Western and Eastern health professionals might be empowered by better understanding of OLTRF's living experiences and concerns during the stages of overseas liver transplantation. Copyright © 2012 Elsevier Inc. All rights reserved.

Identification of conserved genes triggering puberty in European sea bass males (Dicentrarchus labrax) by microarray expression profiling.

PubMed

Blázquez, Mercedes; Medina, Paula; Crespo, Berta; Gómez, Ana; Zanuy, Silvia

2017-06-05

Spermatogenesis is a complex process characterized by the activation and/or repression of a number of genes in a spatio-temporal manner. Pubertal development in males starts with the onset of the first spermatogenesis and implies the division of primary spermatogonia and their subsequent entry into meiosis. This study is aimed at the characterization of genes involved in the onset of puberty in European sea bass, and constitutes the first transcriptomic approach focused on meiosis in this species. European sea bass testes collected at the onset of puberty (first successful reproduction) were grouped in stage I (resting stage), and stage II (proliferative stage). Transition from stage I to stage II was marked by an increase of 11ketotestosterone (11KT), the main fish androgen, whereas the transcriptomic study resulted in 315 genes differentially expressed between the two stages. The onset of puberty induced 1) an up-regulation of genes involved in cell proliferation, cell cycle and meiosis progression, 2) changes in genes related with reproduction and growth, and 3) a down-regulation of genes included in the retinoic acid (RA) signalling pathway. The analysis of GO-terms and biological pathways showed that cell cycle, cell division, cellular metabolic processes, and reproduction were affected, consistent with the early events that occur during the onset of puberty. Furthermore, changes in the expression of three RA nuclear receptors point at the importance of the RA-signalling pathway during this period, in agreement with its role in meiosis. The results contribute to boost our knowledge of the early molecular and endocrine events that trigger pubertal development and the onset of spermatogenesis in fish. These include an increase in 11KT plasma levels and changes in the expression of several genes involved in cell proliferation, cell cycle progression, meiosis or RA-signalling pathway. Moreover, the results can be applied to study meiosis in this economically important fish species for Mediterranean countries, and may help to develop tools for its sustainable aquaculture.

Gallium arsenide processing for gate array logic

NASA Technical Reports Server (NTRS)

Cole, Eric D.

1989-01-01

The development of a reliable and reproducible GaAs process was initiated for applications in gate array logic. Gallium Arsenide is an extremely important material for high speed electronic applications in both digital and analog circuits since its electron mobility is 3 to 5 times that of silicon, this allows for faster switching times for devices fabricated with it. Unfortunately GaAs is an extremely difficult material to process with respect to silicon and since it includes the arsenic component GaAs can be quite dangerous (toxic) especially during some heating steps. The first stage of the research was directed at developing a simple process to produce GaAs MESFETs. The MESFET (MEtal Semiconductor Field Effect Transistor) is the most useful, practical and simple active device which can be fabricated in GaAs. It utilizes an ohmic source and drain contact separated by a Schottky gate. The gate width is typically a few microns. Several process steps were required to produce a good working device including ion implantation, photolithography, thermal annealing, and metal deposition. A process was designed to reduce the total number of steps to a minimum so as to reduce possible errors. The first run produced no good devices. The problem occurred during an aluminum etch step while defining the gate contacts. It was found that the chemical etchant attacked the GaAs causing trenching and subsequent severing of the active gate region from the rest of the device. Thus all devices appeared as open circuits. This problem is being corrected and since it was the last step in the process correction should be successful. The second planned stage involves the circuit assembly of the discrete MESFETs into logic gates for test and analysis. Finally the third stage is to incorporate the designed process with the tested circuit in a layout that would produce the gate array as a GaAs integrated circuit.

Transcriptome profiling of the whitefly Bemisia tabaci reveals stage-specific gene expression signatures for thiamethoxam resistance

PubMed Central

Yang, N; Xie, W; Jones, CM; Bass, C; Jiao, X; Yang, X; Liu, B; Li, R; Zhang, Y

2013-01-01

Bemisia tabaci has developed high levels of resistance to many insecticides including the neonicotinoids and there is strong evidence that for some compounds resistance is stage-specific. To investigate the molecular basis of B. tabaci resistance to the neonicotinoid thiamethoxam we used a custom whitefly microarray to compare gene expression in the egg, nymph and adult stages of a thiamethoxam-resistant strain (TH-R) with a susceptible strain (TH-S). Gene ontology and bioinformatic analyses revealed that in all life stages many of the differentially expressed transcripts encoded enzymes involved in metabolic processes and/or metabolism of xenobiotics. Several of these are candidate resistance genes and include the cytochrome P450 CYP6CM1, which has been shown to confer resistance to several neonicotinoids previously, a P450 belonging to the Cytochrome P450s 4 family and a glutathione S-transferase (GST) belonging to the sigma class. Finally several ATP-binding cassette transporters of the ABCG subfamily were highly over-expressed in the adult stage of the TH-R strain and may play a role in resistance by active efflux. Here, we evaluated both common and stage-specific gene expression signatures and identified several candidate resistance genes that may underlie B. tabaci resistance to thiamethoxam. PMID:23889345

Testing the Causal Mediation Component of Dodge's Social Information Processing Model of Social Competence and Depression

ERIC Educational Resources Information Center

Possel, Patrick; Seemann, Simone; Ahrens, Stefanie; Hautzinger, Martin

2006-01-01

In Dodge's model of "social information processing" depression is the result of a linear sequence of five stages of information processing ("Annu Rev Psychol" 44: 559-584, 1993). These stages follow a person's reaction to situational stimuli, such that each stage of information processing mediates the relationship between earlier and later stages.…

The PREP pipeline: standardized preprocessing for large-scale EEG analysis.

PubMed

Bigdely-Shamlo, Nima; Mullen, Tim; Kothe, Christian; Su, Kyung-Min; Robbins, Kay A

2015-01-01

The technology to collect brain imaging and physiological measures has become portable and ubiquitous, opening the possibility of large-scale analysis of real-world human imaging. By its nature, such data is large and complex, making automated processing essential. This paper shows how lack of attention to the very early stages of an EEG preprocessing pipeline can reduce the signal-to-noise ratio and introduce unwanted artifacts into the data, particularly for computations done in single precision. We demonstrate that ordinary average referencing improves the signal-to-noise ratio, but that noisy channels can contaminate the results. We also show that identification of noisy channels depends on the reference and examine the complex interaction of filtering, noisy channel identification, and referencing. We introduce a multi-stage robust referencing scheme to deal with the noisy channel-reference interaction. We propose a standardized early-stage EEG processing pipeline (PREP) and discuss the application of the pipeline to more than 600 EEG datasets. The pipeline includes an automatically generated report for each dataset processed. Users can download the PREP pipeline as a freely available MATLAB library from http://eegstudy.org/prepcode.

[Experience of importation of equipment for research in the ELSA-Brasil].

PubMed

Almeida, Cristiana Paula Matos de; Aquino, Estela M L; Mota, Eduardo L A; Mota, Fábio Batista; Braga, Valéria Cerqueira Campos; Ladeira, Roberto Marini; Silva, Gabriela Feiden; Souza, Angelita Gomes de; Oliveira, Rosalba

2013-06-01

Policies that promote research in health were established in the last decade, developing the Brazilian scientific production. This development has not been accompanied by an improvement in the legal-institutional framework, thus hindering the development of research projects, including equipment importation activities. The present study aimed to analyze the equipment importation process for the Brazilian Longitudinal Study for Adult Health (ELSA-Brasil). A case study was performed with data collected from internal ELSA-Brasil documents in five Investigation Centers and their respective supporting foundations. The following importation documents were analyzed: pulse wave velocity, bioimaging and retinography. Additionally, non-structured interviews with researchers and key informers were conducted in the foundations. Data were treated and organized into three stages: administrative-operational, exchange rate, and fiscal. Lengths of duration of these stages were calculated comparatively among centers. The need to standardize equipment in a multicenter study required a joint action of implementing institutions and foundations. Of all pieces of equipment analyzed, the first stage was administrative-operational, with a varying duration (minimum of eight, maximum of 101, and mean of 55 days) which was longer when legal opinions were included. The second stage was the exchange rate, which was longer than the former and did not pose any obstacles to the process (minimum of 11, maximum of 381, and mean of 196 days). The third stage was fiscal, which was the longest one (minimum of 43, maximum of 388, and mean of 215.5 days), due to the release of equipment without registration into the country. There were other factors that posed obstacles: inexperience of investigation centers and institutions in networking; inadequacy of the national legislation on scientific research particularities; and the lack of specialized professionals in scientific project management. The results show the slowness of the equipment importation process in Brazil, especially due to legal, bureaucratic and managerial obstacles.

Theoretical approaches to lightness and perception.

PubMed

Gilchrist, Alan

2015-01-01

Theories of lightness, like theories of perception in general, can be categorized as high-level, low-level, and mid-level. However, I will argue that in practice there are only two categories: one-stage mid-level theories, and two-stage low-high theories. Low-level theories usually include a high-level component and high-level theories include a low-level component, the distinction being mainly one of emphasis. Two-stage theories are the modern incarnation of the persistent sensation/perception dichotomy according to which an early experience of raw sensations, faithful to the proximal stimulus, is followed by a process of cognitive interpretation, typically based on past experience. Like phlogiston or the ether, raw sensations seem like they must exist, but there is no clear evidence for them. Proximal stimulus matches are postperceptual, not read off an early sensory stage. Visual angle matches are achieved by a cognitive process of flattening the visual world. Likewise, brightness (luminance) matches depend on a cognitive process of flattening the illumination. Brightness is not the input to lightness; brightness is slower than lightness. Evidence for an early (< 200 ms) mosaic stage is shaky. As for cognitive influences on perception, the many claims tend to fall apart upon close inspection of the evidence. Much of the evidence for the current revival of the 'new look' is probably better explained by (1) a natural desire of (some) subjects to please the experimenter, and (2) the ease of intuiting an experimental hypothesis. High-level theories of lightness are overkill. The visual system does not need to know the amount of illumination, merely which surfaces share the same illumination. This leaves mid-level theories derived from the gestalt school. Here the debate seems to revolve around layer models and framework models. Layer models fit our visual experience of a pattern of illumination projected onto a pattern of reflectance, while framework models provide a better account of illusions and failures of constancy. Evidence for and against these approaches is reviewed.

Improvement Strategies at Six Culturally Different Schools. Final Report FY91-FY95, Leadership for Change Project.

ERIC Educational Resources Information Center

Fuentes, Nancy; And Others

School leaders have begun to understand that "change is a process." Leaders must facilitate change, not merely disseminate or direct it. This publication presents findings of the Leadership for Change Project (LFC). The LFC studied six sites at different stages of the school-improvement process, including two "developmental" sites in Arkansas and…

Application of image processing on struvite recovery from swine wastewater by using the fluidized bed.

PubMed

Ye, Zhi-Long; Deng, Yujun; Ye, Xin; Lou, Yaoyin; Chen, Shaohua

2018-01-01

Fluidized granulation is one of the common methods used in wastewater treatment and resource recovery with harvesting millimeter-scale large particles. Presently, effective methods are lacking to measure the fluidized granules ranging from micro- to millimeter scales, with the consequence of ineffectively controlling and optimizing the granulation process. In this work, recovering struvite (MgNH 4 PO 4 ·6H 2 O) from swine wastewater by using a fluidized bed was taken as an example. Image processing was applied to analyze the properties of different types of struvite granules, including morphology, particle size distribution, number density and mass concentration. Four stages of the struvite crystal evolution were therefore defined: aggregation, aggregate compaction, cluster-agglomerating and coating growth. These stages could occur simultaneously or sequentially. Up-flow rates of 30-80 mm/s in the fluidized bed sustained 600-876 g/L granular solids. Results revealed that the coating-growth granules were formed with compact aggregates or cluster-agglomerating granules as the nuclei. The growth rates for the different types of particles, including population growth, mass increase and particle size enlargement, were determined. In final, a schematic illustration for struvite granulation process is also presented.

Process for the physical segregation of minerals

DOEpatents

Yingling, Jon C.; Ganguli, Rajive

2004-01-06

With highly heterogeneous groups or streams of minerals, physical segregation using online quality measurements is an economically important first stage of the mineral beneficiation process. Segregation enables high quality fractions of the stream to bypass processing, such as cleaning operations, thereby reducing the associated costs and avoiding the yield losses inherent in any downstream separation process. The present invention includes various methods for reliably segregating a mineral stream into at least one fraction meeting desired quality specifications while at the same time maximizing yield of that fraction.

Environmental impact of mushroom compost production.

PubMed

Leiva, Francisco; Saenz-Díez, Juan-Carlos; Martínez, Eduardo; Jiménez, Emilio; Blanco, Julio

2016-09-01

This research analyses the environmental impact of the creation of Agaricus bisporus compost packages. The composting process is the intermediate stage of the mushroom production process, subsequent to the mycelium cultivation stage and prior to the fruiting bodies cultivation stage. A full life cycle assessment model of the Agaricus bisporus composting process has been developed through the identification and analysis of the inputs-outputs and energy consumption of the activities involved in the production process. The study has been developed based on data collected from a plant during a 1 year campaign, thereby obtaining accurate information used to analyse the environmental impact of the process. A global analysis of the main stages of the process shows that the process that has the greatest impact in most categories is the compost batch preparation process. This is due to an increased consumption of energy resources by the machinery that mixes the raw materials to create the batch. At the composting process inside the tunnel stage, the activity that has the greatest impact in almost all categories studied is the initial stage of composting. This is due to higher energy consumption during the process compared to the other stages. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Bridging the gap: facilities and technologies for development of early stage therapeutic mAb candidates.

PubMed

Munro, Trent P; Mahler, Stephen M; Huang, Edwin P; Chin, David Y; Gray, Peter P

2011-01-01

Therapeutic monoclonal antibodies (mAbs) currently dominate the biologics marketplace. Development of a new therapeutic mAb candidate is a complex, multistep process and early stages of development typically begin in an academic research environment. Recently, a number of facilities and initiatives have been launched to aid researchers along this difficult path and facilitate progression of the next mAb blockbuster. Complementing this, there has been a renewed interest from the pharmaceutical industry to reconnect with academia in order to boost dwindling pipelines and encourage innovation. In this review, we examine the steps required to take a therapeutic mAb from discovery through early stage preclinical development and toward becoming a feasible clinical candidate. Discussion of the technologies used for mAb discovery, production in mammalian cells and innovations in single-use bioprocessing is included. We also examine regulatory requirements for product quality and characterization that should be considered at the earliest stages of mAb development. We provide details on the facilities available to help researchers and small-biotech build value into early stage product development, and include examples from within our own facility of how technologies are utilized and an analysis of our client base.

Validation of design procedure and performance modeling of a heat and fluid transport field experiment in the unsaturated zone

NASA Astrophysics Data System (ADS)

Nir, A.; Doughty, C.; Tsang, C. F.

Validation methods which developed in the context of deterministic concepts of past generations often cannot be directly applied to environmental problems, which may be characterized by limited reproducibility of results and highly complex models. Instead, validation is interpreted here as a series of activities, including both theoretical and experimental tests, designed to enhance our confidence in the capability of a proposed model to describe some aspect of reality. We examine the validation process applied to a project concerned with heat and fluid transport in porous media, in which mathematical modeling, simulation, and results of field experiments are evaluated in order to determine the feasibility of a system for seasonal thermal energy storage in shallow unsaturated soils. Technical details of the field experiments are not included, but appear in previous publications. Validation activities are divided into three stages. The first stage, carried out prior to the field experiments, is concerned with modeling the relevant physical processes, optimization of the heat-exchanger configuration and the shape of the storage volume, and multi-year simulation. Subjects requiring further theoretical and experimental study are identified at this stage. The second stage encompasses the planning and evaluation of the initial field experiment. Simulations are made to determine the experimental time scale and optimal sensor locations. Soil thermal parameters and temperature boundary conditions are estimated using an inverse method. Then results of the experiment are compared with model predictions using different parameter values and modeling approximations. In the third stage, results of an experiment performed under different boundary conditions are compared to predictions made by the models developed in the second stage. Various aspects of this theoretical and experimental field study are described as examples of the verification and validation procedure. There is no attempt to validate a specific model, but several models of increasing complexity are compared with experimental results. The outcome is interpreted as a demonstration of the paradigm proposed by van der Heijde, 26 that different constituencies have different objectives for the validation process and therefore their acceptance criteria differ also.

Automatic Sleep Stage Determination by Multi-Valued Decision Making Based on Conditional Probability with Optimal Parameters

NASA Astrophysics Data System (ADS)

Wang, Bei; Sugi, Takenao; Wang, Xingyu; Nakamura, Masatoshi

Data for human sleep study may be affected by internal and external influences. The recorded sleep data contains complex and stochastic factors, which increase the difficulties for the computerized sleep stage determination techniques to be applied for clinical practice. The aim of this study is to develop an automatic sleep stage determination system which is optimized for variable sleep data. The main methodology includes two modules: expert knowledge database construction and automatic sleep stage determination. Visual inspection by a qualified clinician is utilized to obtain the probability density function of parameters during the learning process of expert knowledge database construction. Parameter selection is introduced in order to make the algorithm flexible. Automatic sleep stage determination is manipulated based on conditional probability. The result showed close agreement comparing with the visual inspection by clinician. The developed system can meet the customized requirements in hospitals and institutions.

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies

PubMed Central

2018-01-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers’ particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices. PMID:29862314

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies.

PubMed

Haas, Emily J

2018-03-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers' particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices.

A two-stage model of fracture of rocks

USGS Publications Warehouse

Kuksenko, V.; Tomilin, N.; Damaskinskaya, E.; Lockner, D.

1996-01-01

In this paper we propose a two-stage model of rock fracture. In the first stage, cracks or local regions of failure are uncorrelated occur randomly throughout the rock in response to loading of pre-existing flaws. As damage accumulates in the rock, there is a gradual increase in the probability that large clusters of closely spaced cracks or local failure sites will develop. Based on statistical arguments, a critical density of damage will occur where clusters of flaws become large enough to lead to larger-scale failure of the rock (stage two). While crack interaction and cooperative failure is expected to occur within clusters of closely spaced cracks, the initial development of clusters is predicted based on the random variation in pre-existing Saw populations. Thus the onset of the unstable second stage in the model can be computed from the generation of random, uncorrelated damage. The proposed model incorporates notions of the kinetic (and therefore time-dependent) nature of the strength of solids as well as the discrete hierarchic structure of rocks and the flaw populations that lead to damage accumulation. The advantage offered by this model is that its salient features are valid for fracture processes occurring over a wide range of scales including earthquake processes. A notion of the rank of fracture (fracture size) is introduced, and criteria are presented for both fracture nucleation and the transition of the failure process from one scale to another.

eHealth adoption factors in medical hospitals: A focus on the Netherlands.

PubMed

Faber, Sander; van Geenhuizen, Marina; de Reuver, Mark

2017-04-01

Despite strong policy interest in eHealth, actual adoption in many European hospitals is low. This study develops and tests in a preliminary way an organisational eHealth adoption model rooted in several adoption frameworks to improve understanding of this phenomenon. The model is explored through a survey among hospitals in the Netherlands using a Structural Equation Modelling (SEM) approach. Specific attention is paid to measurement of organisational readiness and to adoption as a process including different stages. Our results suggest a sharp decrease in the adoption process by hospitals after the stage of interest/commitment. Adoption tends to be significantly affected by size of the hospital, organisational readiness including technical aspects, and top management support. eHealth adoption tends to be not a linear process nor a linear function of contextual antecedents. Organisational readiness is an important antecedent for eHealth adoption. The paper concludes with organisational strategies and policies to foster eHealth adoption in hospitals and suggestions for future study. Copyright © 2017 Elsevier B.V. All rights reserved.

Preserving Self: Theorizing the Social and Psychological Processes of Living With Parkinson Disease.

PubMed

Vann-Ward, Terrie; Morse, Janice M; Charmaz, Kathy

2017-06-01

The purpose of this constructivist grounded theory article is to identify, explore, and theorize the social and psychological processes used by people with Parkinson disease. Analytic procedures generated the five-stage theory of Preserving self of people with Parkinson disease: (a) making sense of symptoms, (b) defining turning points, (c) experiencing identity dilemmas, (d) reconnecting the self, and (e) envisioning a future. Reminders of former selves and capabilities were painful; participants desperately sought normalcy. Participants developed creative methods for maintaining independence but frequently overestimated their abilities and took risks. Participants were 15 men and 10 women (ages 40-95), most of whom lived with their families. Disease status was ascertained through medication logs and two scales: Hoehn and Yahr staging and Activities of Daily Living. Data included 62 in-depth interviews, nonparticipant observation, and participant photos, videos, and related documents. Recommendations were derived from the theory to support processes of Preserving Self as interventions designed to reduce the loss of self and to enhance Preserving self. These recommendations included developing relationships, teaching expected and unexpected feelings and behaviors, and involvement with sensory integrating activities.

K-Shell Photoionization of Nickel Ions Using R-Matrix

NASA Technical Reports Server (NTRS)

Witthoeft, M. C.; Bautista, M. A.; Garcia, J.; Kallman, T. R.; Mendoza, C.; Palmeri, P.; Quinet, P.

2011-01-01

We present R-matrix calculations of photoabsorption and photoionization cross sections across the K edge of the Li-like to Ca-like ions stages of Ni. Level-resolved, Breit-Pauli calculations were performed for the Li-like to Na-like stages. Term-resolved calculations, which include the mass-velocity and Darwin relativistic corrections, were performed for the Mg-like to Ca-like ion stages. This data set is extended up to Fe-like Ni using the distorted wave approximation as implemented by AUTOSTRUCTURE. The R-matrix calculations include the effects of radiative and Auger dampings by means of an optical potential. The damping processes affect the absorption resonances converging to the K thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the K-shell photoionization threshold. These data are important for the modeling of features found in photoionized plasmas.

Speed of feedforward and recurrent processing in multilayer networks of integrate-and-fire neurons.

PubMed

Panzeri, S; Rolls, E T; Battaglia, F; Lavis, R

2001-11-01

The speed of processing in the visual cortical areas can be fast, with for example the latency of neuronal responses increasing by only approximately 10 ms per area in the ventral visual system sequence V1 to V2 to V4 to inferior temporal visual cortex. This has led to the suggestion that rapid visual processing can only be based on the feedforward connections between cortical areas. To test this idea, we investigated the dynamics of information retrieval in multiple layer networks using a four-stage feedforward network modelled with continuous dynamics with integrate-and-fire neurons, and associative synaptic connections between stages with a synaptic time constant of 10 ms. Through the implementation of continuous dynamics, we found latency differences in information retrieval of only 5 ms per layer when local excitation was absent and processing was purely feedforward. However, information latency differences increased significantly when non-associative local excitation was included. We also found that local recurrent excitation through associatively modified synapses can contribute significantly to processing in as little as 15 ms per layer, including the feedforward and local feedback processing. Moreover, and in contrast to purely feed-forward processing, the contribution of local recurrent feedback was useful and approximately this rapid even when retrieval was made difficult by noise. These findings suggest that cortical information processing can benefit from recurrent circuits when the allowed processing time per cortical area is at least 15 ms long.

Design and DSP implementation of star image acquisition and star point fast acquiring and tracking

NASA Astrophysics Data System (ADS)

Zhou, Guohui; Wang, Xiaodong; Hao, Zhihang

2006-02-01

Star sensor is a special high accuracy photoelectric sensor. Attitude acquisition time is an important function index of star sensor. In this paper, the design target is to acquire 10 samples per second dynamic performance. On the basis of analyzing CCD signals timing and star image processing, a new design and a special parallel architecture for improving star image processing are presented in this paper. In the design, the operation moving the data in expanded windows including the star to the on-chip memory of DSP is arranged in the invalid period of CCD frame signal. During the CCD saving the star image to memory, DSP processes the data in the on-chip memory. This parallelism greatly improves the efficiency of processing. The scheme proposed here results in enormous savings of memory normally required. In the scheme, DSP HOLD mode and CPLD technology are used to make a shared memory between CCD and DSP. The efficiency of processing is discussed in numerical tests. Only in 3.5ms is acquired the five lightest stars in the star acquisition stage. In 43us, the data in five expanded windows including stars are moved into the internal memory of DSP, and in 1.6ms, five star coordinates are achieved in the star tracking stage.

Application of annular centrifugal contactors in the hot test of the improved total partitioning process for high level liquid waste.

PubMed

Duan, Wuhua; Chen, Jing; Wang, Jianchen; Wang, Shuwei; Feng, Xiaogui; Wang, Xinghai; Li, Shaowei; Xu, Chao

2014-08-15

High level liquid waste (HLLW) produced from the reprocessing of the spent nuclear fuel still contains moderate amounts of uranium, transuranium (TRU) actinides, (90)Sr, (137)Cs, etc., and thus constitutes a permanent hazard to the environment. The partitioning and transmutation (P&T) strategy has increasingly attracted interest for the safe treatment and disposal of HLLW, in which the partitioning of HLLW is one of the critical technical issues. An improved total partitioning process, including a TRPO (tri-alkylphosphine oxide) process for the removal of actinides, a CESE (crown ether strontium extraction) process for the removal of Sr, and a CECE (calixcrown ether cesium extraction) process for the removal of Cs, has been developed to treat Chinese HLLW. A 160-hour hot test of the improved total partitioning process was carried out using 72-stage 10-mm-dia annular centrifugal contactors (ACCs) and genuine HLLW. The hot test results showed that the average DFs of total α activity, Sr and Cs were 3.57 × 10(3), 2.25 × 10(4) and 1.68 × 10(4) after the hot test reached equilibrium, respectively. During the hot test, 72-stage 10-mm-dia ACCs worked stable, continuously with no stage failing or interruption of the operation. Copyright © 2014 Elsevier B.V. All rights reserved.

The change in prevalence of Campylobacter on chicken carcasses during processing: a systematic review.

PubMed

Guerin, M T; Sir, C; Sargeant, J M; Waddell, L; O'Connor, A M; Wills, R W; Bailey, R H; Byrd, J A

2010-05-01

A systematic review was conducted to evaluate the change in prevalence of Campylobacter on chicken carcasses during processing. A structured literature search of 8 electronic databases using the key words for "Campylobacter," "chicken," and "processing" identified 1,734 unique citations. Abstracts were screened for relevance by 2 independent reviewers. Thirty-two studies described prevalence at more than one stage during processing and were included in this review. Of the studies that described the prevalence of Campylobacter on carcasses before and after specific stages of processing, the chilling stage had the greatest number of studies (9), followed by washing (6), defeathering (4), scalding (2), and evisceration (1). Studies that sampled before and after scalding or chilling, or both, showed that the prevalence of Campylobacter generally decreased immediately after the stage (scalding: 20.0 to 40.0% decrease; chilling: 100.0% decrease to 26.6% increase). The prevalence of Campylobacter increased after defeathering (10.0 to 72.0%) and evisceration (15.0%). The prevalence after washing was inconsistent among studies (23.0% decrease to 13.3% increase). Eleven studies reported the concentration of Campylobacter, as well as, or instead of, the prevalence. Studies that sampled before and after specific stages of processing showed that the concentration of Campylobacter decreased after scalding (minimum decrease of 1.3 cfu/g, maximum decrease of 2.9 cfu/mL), evisceration (0.3 cfu/g), washing (minimum 0.3 cfu/mL, maximum 1.1 cfu/mL), and chilling (minimum 0.2 cfu/g, maximum 1.7 cfu/carcass) and increased after defeathering (minimum 0.4 cfu/g, maximum 2.9 cfu/mL). Available evidence is sparse and suggests more data are needed to understand the magnitude and mechanism by which the prevalence and concentration of Campylobacter changes during processing. This understanding should help researchers and program developers identify the most likely points in processing to implement effective control efforts. For example, if contamination will occur during defeathering and likely during evisceration, critical control points postevisceration are likely to have a greater effect on the end product going to the consumer.

Silicon production process evaluations

NASA Technical Reports Server (NTRS)

1982-01-01

Engineering design of the third distillation column in the process was accomplished. The initial design is based on a 94.35% recovery of dichlorosilane in the distillate and a 99.9% recovery of trichlorosilane in the bottoms. The specified separation is achieved at a reflux ratio of 15 with 20 trays (equilibrium stages). Additional specifications and results are reported including equipment size, temperatures and pressure. Specific raw material requirements necessary to produce the silicon in the process are presented. The primary raw materials include metallurgical grade silicon, silicon tetrachloride, hydrogen, copper (catalyst) and lime (waste treatment). Hydrogen chloride is produced as by product in the silicon deposition. Cost analysis of the process was initiated during this reporting period.

Invasive Plants on Rangelands: a Global Threat

USDA-ARS?s Scientific Manuscript database

Invasive plant species are spreading and invading rangelands at an unprecedented rate costing ranchers billions of dollars to control invasive plants each year. In its simplest form, the invasion process has four primary stages, including introduction, establishment, spread and colonization. Th...

U.S. EPA'S RESEARCH ON LIFE-CYCLE ANALYSIS

EPA Science Inventory

Life-cycle analysis (LCA) consists of looking at a product, process or activity from its inception through its completion. or consumer products, this includes the stages of raw material acquisition, manufacturing and fabrication, distribution, consumer use/reuse and final disposa...

Plasma regenerated particulate trap and NO.sub.x reduction system

DOEpatents

Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.; Brusasco, Raymond M.

2000-01-01

A non-catalytic two-stage process for removal of NO.sub.x and particulates from engine exhaust comprises a first stage that plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons, and a second stage, which preferably occurs simultaneously with the first stage, that converts NO.sub.2 and carbon soot particles to respective environmentally benign gases that include N.sub.2 and CO.sub.2. By preconverting NO to NO.sub.2 in the first stage, the efficiency of the second stage for NO.sub.x reduction is enhanced while carbon soot from trapped particulates is simultaneously converted to CO.sub.2 when reacting with the NO.sub.2 (that converts to N.sub.2). For example, an internal combustion engine exhaust is connected by a pipe to a chamber where carbon-containing particulates are electrostatically trapped or filtered and a non-thermal plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons. Volatile hydrocarbons (C.sub.x H.sub.y) from the trapped particulates are oxidized in the plasma and the remaining soot from the particulates reacts with the NO.sub.2 to convert NO.sub.2 to N.sub.2, and the soot to CO.sub.2. The nitrogen exhaust components remain in the gas phase throughout the process, with no accompanying adsorption.

Managing patient complaints in China: a qualitative study in Shanghai

PubMed Central

Jiang, Yishi; Ying, Xiaohua; Zhang, Qian; Tang, Sirui Rae; Kane, Sumit; Mukhopadhyay, Maitrayee; Qian, Xu

2014-01-01

Objectives To examine the handling system for patient complaints and to identify existing barriers that are associated with effective management of patient complaints in China. Setting Key stakeholders of the handling system for patient complaints at the national, Shanghai municipal and hospital levels in China. Participants 35 key informants including policymakers, hospital managers, healthcare providers, users and other stakeholders in Shanghai. Primary and secondary outcome measures Semistructured interviews were conducted to understand the process of handling patient complaints and factors affecting the process and outcomes of patient complaint management. Results The Chinese handling system for patient complaints was established in the past decade. Hospitals shoulder the most responsibility of patient complaint handling. Barriers to effective management of patient complaints included service users’ low awareness of the systems in the initial stage of the process; poor capacity and skills of healthcare providers, incompetence and powerlessness of complaint handlers and non-transparent exchange of information during the process of complaint handling; conflicts between relevant actors and regulations and unjustifiable complaints by patients during solution settlements; and weak enforcement of regulations, deficient information for managing patient complaints and unwillingness of the hospitals to effectively handle complaints in the postcomplaint stage. Conclusions Barriers to the effective management of patient complaints vary at the different stages of complaint handling and perspectives on these barriers differ between the service users and providers. Information, procedure design, human resources, system arrangement, unified legal system and regulations and factors shaping the social context all play important roles in effective patient complaint management. PMID:25146715

Surface defect detection in tiling Industries using digital image processing methods: analysis and evaluation.

PubMed

Karimi, Mohammad H; Asemani, Davud

2014-05-01

Ceramic and tile industries should indispensably include a grading stage to quantify the quality of products. Actually, human control systems are often used for grading purposes. An automatic grading system is essential to enhance the quality control and marketing of the products. Since there generally exist six different types of defects originating from various stages of tile manufacturing lines with distinct textures and morphologies, many image processing techniques have been proposed for defect detection. In this paper, a survey has been made on the pattern recognition and image processing algorithms which have been used to detect surface defects. Each method appears to be limited for detecting some subgroup of defects. The detection techniques may be divided into three main groups: statistical pattern recognition, feature vector extraction and texture/image classification. The methods such as wavelet transform, filtering, morphology and contourlet transform are more effective for pre-processing tasks. Others including statistical methods, neural networks and model-based algorithms can be applied to extract the surface defects. Although, statistical methods are often appropriate for identification of large defects such as Spots, but techniques such as wavelet processing provide an acceptable response for detection of small defects such as Pinhole. A thorough survey is made in this paper on the existing algorithms in each subgroup. Also, the evaluation parameters are discussed including supervised and unsupervised parameters. Using various performance parameters, different defect detection algorithms are compared and evaluated. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Novel Real-Time Diagnosis of the Freezing Process Using an Ultrasonic Transducer

PubMed Central

Tseng, Yen-Hsiang; Cheng, Chin-Chi; Cheng, Hong-Ping; Lee, Dasheng

2015-01-01

The freezing stage governs several critical parameters of the freeze drying process and the quality of the resulting lyophilized products. This paper presents an integrated ultrasonic transducer (UT) in a stainless steel bottle and its application to real-time diagnostics of the water freezing process. The sensor was directly deposited onto the stainless steel bottle using a sol-gel spray technique. It could operate at temperature range from −100 to 400 °C and uses an ultrasonic pulse-echo technique. The progression of the freezing process, including water-in, freezing point and final phase change of water, were all clearly observed using ultrasound. The ultrasonic signals could indicate the three stages of the freezing process and evaluate the cooling and freezing periods under various processing conditions. The temperature was also adopted for evaluating the cooling and freezing periods. These periods increased with water volume and decreased with shelf temperature (i.e., speed of freezing). This study demonstrates the effectiveness of the ultrasonic sensor and technology for diagnosing and optimizing the process of water freezing to save energy. PMID:25946629

Double-Vacuum-Bag Process for Making Resin-Matrix Composites

NASA Technical Reports Server (NTRS)

Bradford, Larry J.

2007-01-01

A double-vacuum-bag process has been devised as a superior alternative to a single-vacuum-bag process used heretofore in making laminated fiber-reinforced resin-matrix composite-material structural components. This process is applicable to broad classes of high-performance matrix resins including polyimides and phenolics that emit volatile compounds (solvents and volatile by-products of resin-curing chemical reactions) during processing. The superiority of the double-vacuum-bag process lies in enhanced management of the volatile compounds. Proper management of volatiles is necessary for making composite-material components of high quality: if not removed and otherwise properly managed, volatiles can accumulate in interior pockets as resins cure, thereby forming undesired voids in the finished products. The curing cycle for manufacturing a composite laminate containing a reactive resin matrix usually consists of a two-step ramp-and-hold temperature profile and an associated single-step pressure profile as shown in Figure 1. The lower-temperature ramp-and-hold step is known in the art as the B stage. During the B stage, prepregs are heated and volatiles are generated. Because pressure is not applied at this stage, volatiles are free to escape. Pressure is applied during the higher-temperature ramp-and-hold step to consolidate the laminate and impart desired physical properties to the resin matrix. The residual volatile content and fluidity of the resin at the beginning of application of consolidation pressure are determined by the temperature and time parameters of the B stage. Once the consolidation pressure is applied, residual volatiles are locked in. In order to produce a void-free, high-quality laminate, it is necessary to design the curing cycle to obtain the required residual fluidity and the required temperature at the time of application of the consolidation pressure.

World Calibration Center for VOC (WCC-VOC), a new Facility for the WMO-GAW-Programme

NASA Astrophysics Data System (ADS)

Rappenglueck, B.-

2002-12-01

Volatile organic compounds (VOC) are recognized to be important precursors of tropospheric ozone as well as other oxidants and organic aerosols. In order to design effective control measures for the reduction of photooxidants, photochemical processes have to be understood and the sources of the precursors known. Reliable and representative measurements of VOCs are necessary to describe the anthropogenic and biogenic sources, to follow the photochemical degradation of VOCs in the troposphere. Measurement of VOCs is of key importance for the understanding of tropospheric chemistry. Tropospheric VOCs have been one of the recommended measurements to be made within the GAW programme. The purpose will be to monitor their atmospheric abundance, to characterize the various compounds with regard to anthropogenic and biogenic sources and to evaluate their role in the tropospheric ozone formation process. An international WMO/GAW panel of experts for VOC measurements developed the rational and objectives for this GAW activity and recommended the configuration and required activities of the WCC-VOC. In reflection of the complexity of VOC measurements and the current status of measurement technology, a "staged" approach was adopted. Stage 1 measurements: C2-C9 hydrocarbons, including alkanes, alkenes, alkynes, dienes and monocyclics. (The WCC-VOC operates currently under this mode). Stage 2 measurements: C10-C14 hydrocarbons, including higher homologs of the Stage 1 set as well as biogenic hydrocarbon compounds. Stage 3 measurements: Oxygenated VOCs, including alcohols, carbonyls, carboxylic acids. The Quality Assurance/Science Activity Centre (QA/SAC) Germany currently has established the World Calibration Centre for VOC (WCC-VOC). The WCC-VOC has operated in the research mode und has become operational recently. From now on, the WCC-VOC conducts one round-robin calibration audit per year at all global stations that measure VOCs and assists other stations in setting up VOC measurement capabilities. Furthermore, the WCC-VOC will promote inter-com-parison experiments with networks related to other programmes, notably EMEP and IGAC.

Applying a punch with microridges in multistage deep drawing processes.

PubMed

Lin, Bor-Tsuen; Yang, Cheng-Yu

2016-01-01

The developers of high aspect ratio components aim to minimize the processing stages in deep drawing processes. This study elucidates the application of microridge punches in multistage deep drawing processes. A microridge punch improves drawing performance, thereby reducing the number of stages required in deep forming processes. As an example, the original eight-stage deep forming process for a copper cylindrical cup with a high aspect ratio was analyzed by finite element simulation. Microridge punch designs were introduced in Stages 4 and 7 to replace the original punches. In addition, Stages 3 and 6 were eliminated. Finally, these changes were verified through experiments. The results showed that the microridge punches reduced the number of deep drawing stages yielding similar thickness difference percentages. Further, the numerical and experimental results demonstrated good consistency in the thickness distribution.

Numerosity processing in early visual cortex.

PubMed

Fornaciai, Michele; Brannon, Elizabeth M; Woldorff, Marty G; Park, Joonkoo

2017-08-15

While parietal cortex is thought to be critical for representing numerical magnitudes, we recently reported an event-related potential (ERP) study demonstrating selective neural sensitivity to numerosity over midline occipital sites very early in the time course, suggesting the involvement of early visual cortex in numerosity processing. However, which specific brain area underlies such early activation is not known. Here, we tested whether numerosity-sensitive neural signatures arise specifically from the initial stages of visual cortex, aiming to localize the generator of these signals by taking advantage of the distinctive folding pattern of early occipital cortices around the calcarine sulcus, which predicts an inversion of polarity of ERPs arising from these areas when stimuli are presented in the upper versus lower visual field. Dot arrays, including 8-32dots constructed systematically across various numerical and non-numerical visual attributes, were presented randomly in either the upper or lower visual hemifields. Our results show that neural responses at about 90ms post-stimulus were robustly sensitive to numerosity. Moreover, the peculiar pattern of polarity inversion of numerosity-sensitive activity at this stage suggested its generation primarily in V2 and V3. In contrast, numerosity-sensitive ERP activity at occipito-parietal channels later in the time course (210-230ms) did not show polarity inversion, indicating a subsequent processing stage in the dorsal stream. Overall, these results demonstrate that numerosity processing begins in one of the earliest stages of the cortical visual stream. Copyright © 2017 Elsevier Inc. All rights reserved.

Enabling and Enhancing Space Mission Success and Reduction of Risk through the Application of an Integrated Data Architecture

NASA Technical Reports Server (NTRS)

Brummett, Robert C.

2008-01-01

The engineering phases of design, development, test, and evaluation (DDT and E) and subsequent planning, preparation, and operation (Ops) of space vehicles in a complex and distributed environment requires massive and continuous flows of information across the enterprise and across temporal stages of the vehicle lifecycle. The resulting capabilities at each subsequent stage depend in part on the capture, preparation, storage, and subsequent provision of information from prior stages. The United States National Aeronautics and Space Administration (NASA) is currently designing a fleet of new vehicles that will replace the Space Shuttle and expand space operations and exploration capabilities. This includes the 2 stage human rated lift vehicle Ares 1 and its associated crew vehicle the Orion, and a service module; the heavy lift cargo vehicle, Ares 5, and an associated cargo stage known as the Earth Departure Stage; and a Lunar Lander vehicle that contains a descent stage, and ascent stage, and a habitation module. A variety of concurrent assorted ground operations infrastructure including software and facilities are also being developed, assorted technology and assembly designs and development for equipment such as EVA suits, life support systems, command and control technologies are also in the pipeline. The development is occurring in a distributed manner, with project deliverables being contributed by a large and diverse assortment of vendors and most space faring nations. Critical information about all of the components, software, and procedures must be shared during the DDT and E phases and then made readily available to the mission operations staff for access during the planning, preparation, and operations phases, and also need to be readily available for system to system interactions. The Constellation Data Systems Project (CxDS) is identifying the needs, and designing and deploying systems and processes to support these needs. This paper details the steps and processes that NASA is applying within the Constellation Program to manage this data and information, and to insure that the correct information is available, correctly annotated, and can be provisioned digitally to enhance response times, and support engineering analysis and anomaly resolution.

Demography of Principals' Work and School Improvement: Content Validity of Kentucky's Standards and Indicators for School Improvement (SISI)

ERIC Educational Resources Information Center

Lindle, Jane Clark; Stalion, Nancy; Young, Lu

2005-01-01

Kentucky's accountability system includes a school-processes audit known as Standards and Indicators for School Improvement (SISI), which is in a nascent stage of validation. Content validity methods include comparison to instruments measuring similar constructs as well as other techniques such as job analysis. This study used a two-phase process…

Using decision mapping to inform the development of a stated choice survey to elicit youth preferences for sexual and reproductive health and HIV services in rural Malawi.

PubMed

Michaels-Igbokwe, Christine; Lagarde, Mylene; Cairns, John; Terris-Prestholt, Fern

2014-03-01

The process of designing and developing discrete choice experiments (DCEs) is often under reported. The need to adequately report the results of qualitative work used to identify attributes and levels used in a DCE is recognised. However, one area that has received relatively little attention is the exploration of the choice question of interest. This paper provides a case study of the process used to design a stated preference survey to assess youth preferences for integrated sexual and reproductive health (SRH) and HIV outreach services in Malawi. Development and design consisted of six distinct but overlapping and iterative stages. Stage one was a review of the literature. Stage two involved developing a decision map to conceptualise the choice processes involved. Stage three included twelve focus group discussions with young people aged 15-24 (n = 113) and three key informant interviews (n = 3) conducted in Ntcheu District, Malawi. Stage four involved analysis of qualitative data and identification of potential attributes and levels. The choice format and experimental design were selected in stages five and six. The results of the literature review were used to develop a decision map outlining the choices that young people accessing SRH services may face. For youth that would like to use services two key choices were identified: the choice between providers and the choice of service delivery attributes within a provider type. Youth preferences for provider type are best explored using a DCE with a labelled design, while preferences for service delivery attributes associated with a particular provider are better understood using an unlabelled design. Consequently, two DCEs were adopted to jointly assess preferences in this context. Used in combination, the results of the literature review, the decision mapping process and the qualitative work provided robust approach to designing the DCEs individually and as complementary pieces of work. Copyright © 2014 Elsevier Ltd. All rights reserved.

Experimental studies the evolution of stress-strain state in structured rock specimens under uniaxial loading

NASA Astrophysics Data System (ADS)

Oparin, Viktor; Tsoy, Pavel; Usoltseva, Olga; Semenov, Vladimir

2014-05-01

The aim of this study was to analyze distribution and development of stress-stress state in structured rock specimens subject to uniaxial loading to failure. Specific attention was paid to possible oscillating motion of structural elements of the rock specimens under constraints (pre-set stresses at the boundaries of the specimens) and the kinetic energy fractals. The detailed studies into the micro-level stress-strain state distribution and propagation over acting faces of rock specimens subject to uniaxial loading until failure, using automated digital speckle photography analyzer ALMEC-tv, have shown that: • under uniaxial stiff loading of prismatic sandstone, marble and sylvinite specimens on the Instron-8802 servohydraulic testing machine at the mobile grip displacement rate 0.02-0.2 mm/min, at a certain level of stressing, low-frequency micro-deformation processes originate in the specimens due to slow (quasi-static) force; • the amplitude of that deformation-wave processes greatly depends on the micro-loading stage: — at the elastic deformation stage, under the specimen stress lower than half ultimate strength of the specimen, there are no oscillations of microstrains; —at the nonlinearly elastic deformation stage, under stress varied from 0.5 to 1 ultimate strength of the specimens, the amplitudes of microstrains grow, including the descending stage 3; the oscillation frequency f=0.5-4 Hz; —at the residual strength stage, the amplitudes of the microstrains drop abruptly (3-5 times) as against stages 2 and 3; • in the elements of the scanned specimen surface in the region with the incipient crack, the microstrain rate amplitudes are a few times higher than in the undamged surface region of the same specimen. Sometimes, deformation rate greatly grows with increase in the load. The authors have used the energy scanning function of the deformation-wave processes in processing experimental speckle-photography data on the surface of the test specimen subject to loading until failure.

When math operations have visuospatial meanings versus purely symbolic definitions: Which solving stages and brain regions are affected?

PubMed

Pyke, Aryn A; Fincham, Jon M; Anderson, John R

2017-06-01

How does processing differ during purely symbolic problem solving versus when mathematical operations can be mentally associated with meaningful (here, visuospatial) referents? Learners were trained on novel math operations (↓, ↑), that were defined strictly symbolically or in terms of a visuospatial interpretation (operands mapped to dimensions of shaded areas, answer = total area). During testing (scanner session), no visuospatial representations were displayed. However, we expected visuospatially-trained learners to form mental visuospatial representations for problems, and exhibit distinct activations. Since some solution intervals were long (~10s) and visuospatial representations might only be instantiated in some stages during solving, group differences were difficult to detect when treating the solving interval as a whole. However, an HSMM-MVPA process (Anderson and Fincham, 2014a) to parse fMRI data identified four distinct problem-solving stages in each group, dubbed: 1) encode; 2) plan; 3) compute; and 4) respond. We assessed stage-specific differences across groups. During encoding, several regions implicated in general semantic processing and/or mental imagery were more active in visuospatially-trained learners, including: bilateral supramarginal, precuneus, cuneus, parahippocampus, and left middle temporal regions. Four of these regions again emerged in the computation stage: precuneus, right supramarginal/angular, left supramarginal/inferior parietal, and left parahippocampal gyrus. Thus, mental visuospatial representations may not just inform initial problem interpretation (followed by symbolic computation), but may scaffold on-going computation. In the second stage, higher activations were found among symbolically-trained solvers in frontal regions (R. medial and inferior and L. superior) and the right angular and middle temporal gyrus. Activations in contrasting regions may shed light on solvers' degree of use of symbolic versus mental visuospatial strategies, even in absence of behavioral differences. Copyright © 2017 Elsevier Inc. All rights reserved.

A review of blepharochalasis and other causes of the lax, wrinkled eyelid.

PubMed

Held, J L; Schneiderman, P

1990-02-01

Cosmetically unappealing lax, wrinkled eyelid skin may result from various processes including connective tissue diseases, natural aging, and blepharochalasis. Since the end-stage eyelid changes due to several different processes are similar, the presence or absence of prior chronic or recurrent eyelid edema is an important differentiating point. We review blepharochalasis and provide a logical approach to its differential diagnosis.

Manufacturing process applications team (MATeam)

NASA Technical Reports Server (NTRS)

Bangs, E. R.

1980-01-01

The objectives and activities of an aerospace technology transfer group are outlined and programs in various stages of progress are described including the orbital tube flaring device, infrared proximity sensor for robot positioning, laser stripping magnet wire, infrared imaging as welding process tracking system, carbide coating of cutting tools, nondestructive fracture toughness testing of titanium welds, portable solar system for agricultural applications, and an anerobic methane gas generator.

[Using (1)H-nuclear magnetic resonance metabolomics and gene ontology to establish pathological staging model for esophageal cancer patients].

PubMed

Chen, X; Wang, K; Chen, W; Jiang, H; Deng, P C; Li, Z J; Peng, J; Zhou, Z Y; Yang, H; Huang, G X; Zeng, J

2016-07-01

By combining the metabolomics and computational biology, to explore the relationship between metabolic phenotype and pathological stage in esophageal cancer patients, to find the mechanism of metabolic network disturbance and develop a new method for fast preoperative clinical staging. A prospective cohort study (from April 2013 to January 2016) was conducted. The preoperative patients from Sichuan Provincial People's Hospital, who were diagnosed with esophageal cancer from May 2013 to April 2014 were included, and their serum samples were collected to detect (1)H-nuclear magnetic resonance (NMR) metabolomics for the purpose of drawing the metabolic fingerprinting in different stages of patients with esophageal cancer. The data were processed with these methods-principal components analysis: partial least squares regression and support vector machine, for the exploration of the enzyme-gene network regulatory mechanism in abnormal esophageal cancer metabolic network regulation and to build the quantitative prediction model of esophageal cancer staging in the end. All data were processed on high-performance computing platforms Matalab. The comparison of data had used Wilcoxon test, variance analysis, χ(2) test and Fisher exact test. Twenty patients with different stages of esophageal cancer were included; and their serum metabolic fingerprinting could differentiate different tumor stages. There were no difference among the five teams in the age (F=1.086, P>0.05), the body mass index (F=1.035, P>0.05), the distance from the incisors to tumor (F=1.078, P>0.05). Among the patients with different TNM stages, there was a significant difference in plasma metabolome. Compared to ⅡB, ⅢA, Ⅳstage patients, increased levels of butanone, ethanol amine, homocysteine, hydroxy acids and estriol, together with decreased levels of glycoprotein, creatine, choline, isobutyricacid, alanine, leucine, valine, were observed inⅠB, ⅡA stage patients. Four metabolic markers (ethanol amine, hydroxy-propionic acid, homocysteine and estriol) were eventually selected. gene ontology analysis showed that 54 enzymes and genes regulated the 4 key metabolic markers. The quantitative prediction model of esophageal cancer staging based on esophageal cancer NMR spectrum were established. Cross-validation results showed that the predicted effect was good (root mean square error=5.3, R(2)=0.47, P=0.036). The systems biology approaches based on metabolomics and enzyme-gene regulatory network analysis can be used to quantify the metabolic network disturbance of patients with advanced esophageal cancer, and to predict preoperative clinical staging of esophageal cancer patients by plasma NMR metabolomics.

Multispecies lottery competition: a diffusion analysis

USGS Publications Warehouse

Hatfield, J.S.; Chesson, P.L.; Tuljapurkar, S.; Caswell, H.

1997-01-01

The lottery model is a stochastic competition model designed for space-limited communities of sedentary organisms. Examples of such communities include coral reef fishes, aquatic sessile organisms, and many plant communities. Explicit conditions for the coexistence of two species and the stationary distribution of the two-species model were determined previously using an approximation with a diffusion process. In this chapter, a diffusion approximation is presented for the multispecies model for communities of two or more species, and a stage-structured model is investigated. The stage-structured model would be more reasonable for communities of long-lived species such as trees in a forest in which recruitment and death rates depend on the age or stage of the individuals.

[Orange Platform].

PubMed

Toba, Kenji

2017-07-01

The Organized Registration for the Assessment of dementia on Nationwide General consortium toward Effective treatment in Japan (ORANGE platform) is a recently established nationwide clinical registry for dementia. This platform consists of multiple registries of patients with dementia stratified by the following clinical stages: preclinical, mild cognitive impairment, early-stage, and advanced-stage dementia. Patients will be examined in a super-longitudinal fashion, and their lifestyle, social background, genetic risk factors, and required care process will be assessed. This project is also notable because the care registry includes information on the successful, comprehensive management of patients with dementia. Therefore, this multicenter prospective cohort study will contribute participants to all clinical trials for Alzheimer's disease as well as improve the understanding of individuals with dementia.

Raising Butterflies from Your Own Garden.

ERIC Educational Resources Information Center

Howley-Pfeifer, Patricia

2002-01-01

Describes how raising monarch, black swallowtail, and mourning cloak butterflies in a kindergarten class garden can provide opportunities for observation experiences. Includes detailed steps for instruction and describes stages of growth. Excerpts children's journal dictations to illustrate ways to support the discovery process. Describes related…

Tomato seeds maturity detection system based on chlorophyll fluorescence

NASA Astrophysics Data System (ADS)

Li, Cuiling; Wang, Xiu; Meng, Zhijun

2016-10-01

Chlorophyll fluorescence intensity can be used as seed maturity and quality evaluation indicator. Chlorophyll fluorescence intensity of seed coats is tested to judge the level of chlorophyll content in seeds, and further to judge the maturity and quality of seeds. This research developed a detection system of tomato seeds maturity based on chlorophyll fluorescence spectrum technology, the system included an excitation light source unit, a fluorescent signal acquisition unit and a data processing unit. The excitation light source unit consisted of two high power LEDs, two radiators and two constant current power supplies, and it was designed to excite chlorophyll fluorescence of tomato seeds. The fluorescent signal acquisition unit was made up of a fluorescence spectrometer, an optical fiber, an optical fiber scaffolds and a narrowband filter. The data processing unit mainly included a computer. Tomato fruits of green ripe stage, discoloration stage, firm ripe stage and full ripe stage were harvested, and their seeds were collected directly. In this research, the developed tomato seeds maturity testing system was used to collect fluorescence spectrums of tomato seeds of different maturities. Principal component analysis (PCA) method was utilized to reduce the dimension of spectral data and extract principal components, and PCA was combined with linear discriminant analysis (LDA) to establish discriminant model of tomato seeds maturity, the discriminant accuracy was greater than 90%. Research results show that using chlorophyll fluorescence spectrum technology is feasible for seeds maturity detection, and the developed tomato seeds maturity testing system has high detection accuracy.

Low intensity laser therapy: the clinical approach

NASA Astrophysics Data System (ADS)

Kahn, Fred

2006-02-01

Recently, there has been significant improvement in the process of research and application of Low Intensity Laser Therapy (LILT). Despite this positive direction, a wide discrepancy between the research component and clinical understanding of the technology remains. In our efforts to achieve better clinical results and more fully comprehend the mechanisms of interaction between light and cells, further studies are required. The clinical results presented in this paper are extrapolated from a wide range of musculoskeletal problems including degenerative osteoarthritis, repetitive motion injuries, sports injuries, etc. The paper includes three separate clinical studies comprising 151, 286 and 576 consecutive patient discharges at our clinic. Each patient studied received a specific course of treatment that was designed for that individual and was modified on a continuing basis as the healing process advanced. On each visit, clinical status correlation with the duration, dosage and other parameters was carried out. The essentials of the treatment consisted of a three stage approach. This involved a photon stream emanating from a number of specified gallium-aluminum-arsenide diodes; stage one, red light array, stage two consisting of an array of infrared diodes and stage three consisting of the application of an infrared laser diode probe. On average, each of these groups required less than 10 treatments per patient and resulted in a significant improvement / cure rate greater than 90% in all conditions treated. This report clearly demonstrates the benefits of LILT, indicating that it should be more widely adapted in all medical therapeutic settings.

Molecular cloning and mRNA expression pattern of Sox10 in Paramisgurnus dabryanus.

PubMed

Xia, Xiaohua; Chen, Jianjun; Zhang, Linxia; Du, Qiyan; Sun, Jinsheng; Chang, Zhongjie

2013-04-01

A number of genetic studies have established that Sox10 involved in a wide range of developmental processes including sex differentiation and neurogenesis in vertebrates. A Sox10 homologue was cloned from brain of Paramisgurnus dabryanus by using homologous cloning and RACE method, designated as PdSox10. The full-length cDNA of PdSox10 contains a 312 bp 5' UTR, a 1,476 bp open reading frame (ORF) encoding 492 amino acids and a 262 bp 3' UTR (Accession no.: JQ217143). The overall topology of the phylogenetic tree shows that the PdSox10 fits within the Sox10 clade. During embryogenesis, PdSox10 gene seemed to be de novo synthesized in the embryos from gastrulae stage. From the somitogenesis stage and thereafter, distinct expression of PdSox10 was observed in the medial neural tube, extending from the hindbrain through the posterior trunk. In adult, PdSox10 mRNA was detected primarily in the gonads, as well as in brain and heart by RT-PCR. In situ hybridization on gonadal sections further demonstrated that PdSox10 is expressed especially in premature germ cells, in early perinucleolus stage oocytes and cortical-alveolar stage oocytes in ovaries and in spermatogonia and spermatocytes in testes. These preliminary findings suggested that PdSox10 is highly conserved during vertebrate evolution and involved in a wide range of developmental processes including neurogenesis and sex differentiation in vertebrates.

Process cost and facility considerations in the selection of primary cell culture clarification technology.

PubMed

Felo, Michael; Christensen, Brandon; Higgins, John

2013-01-01

The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes <1,000 L, clarification using multi-stage depth filtration offers cost savings compared to clarification using centrifugation. For bioreactor volumes >5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

Stages of Behavioral Change for Reducing Sodium Intake in Korean Consumers: Comparison of Characteristics Based on Social Cognitive Theory.

PubMed

Ahn, So-Hyun; Kwon, Jong Sook; Kim, Kyungmin; Kim, Hye-Kyeong

2017-07-27

High sodium intake increases the risk of cardiovascular disease. Given the importance of behavioral changes to reducing sodium intake, this study aims to investigate the stages of change and the differences in cognitive and behavioral characteristics by stage in Korean consumers. Adult participants ( N = 3892) completed a questionnaire on the stages of behavioral change, recognition of social efforts, outcome expectancy, barriers to practice, nutrition knowledge and dietary behaviors, and self-efficiency related to reduced sodium intake. The numbers of participants in each stage of behavioral change for reducing sodium intake was 29.5% in the maintenance stage, 19.5% in the action stage, and 51.0% in the preaction stage that included the precontemplation, contemplation, and preparation stages. Multiple logistic regression showed that the factors differentiating the three stages were recognizing a supportive social environment, perceived barriers to the practice of reducing sodium intake, and self-efficacy to be conscious of sodium content and to request less salt when eating out. Purchasing experience of sodium-reduced products for salty foods, knowledge of the recommended intake of salt and the difference between sodium and salt, and improving dietary habits of eating salted fish, processed food, and salty snacks were factors for being in the action stage versus the preaction stage. These findings suggest that tailored intervention according to the characteristics of each stage is helpful in reducing sodium intake.

Genome-wide identification and characterization of auxin response factor (ARF) family genes related to flower and fruit development in papaya (Carica papaya L.).

PubMed

Liu, Kaidong; Yuan, Changchun; Li, Haili; Lin, Wanhuang; Yang, Yanjun; Shen, Chenjia; Zheng, Xiaolin

2015-11-05

Auxin and auxin signaling are involved in a series of developmental processes in plants. Auxin Response Factors (ARFs) is reported to modulate the expression of target genes by binding to auxin response elements (AuxREs) and influence the transcriptional activation of down-stream target genes. However, how ARF genes function in flower development and fruit ripening of papaya (Carica papaya L.) is largely unknown. In this study, a comprehensive characterization and expression profiling analysis of 11 C. papaya ARF (CpARF) genes was performed using the newly updated papaya reference genome data. We analyzed CpARF expression patterns at different developmental stages. CpARF1, CpARF2, CpARF4, CpARF5, and CpARF10 showed the highest expression at the initial stage of flower development, but decreased during the following developmental stages. CpARF6 expression increased during the developmental process and reached its peak level at the final stage of flower development. The expression of CpARF1 increased significantly during the fruit ripening stages. Many AuxREs were included in the promoters of two ethylene signaling genes (CpETR1 and CpETR2) and three ethylene-synthesis-related genes (CpACS1, CpACS2, and CpACO1), suggesting that CpARFs might be involved in fruit ripening via the regulation of ethylene signaling. Our study provided comprehensive information on ARF family in papaya, including gene structures, chromosome locations, phylogenetic relationships, and expression patterns. The involvement of CpARF gene expression changes in flower and fruit development allowed us to understand the role of ARF-mediated auxin signaling in the maturation of reproductive organs in papaya.

Human Factors Operability Timeline Analysis to Improve the Processing Flow of the Orion Spacecraft

NASA Technical Reports Server (NTRS)

Schlierf, Roland; Stambolian, Damon B.; Miller, Darcy; Posanda, Juan; Haddock, Mike; Haddad, Mike; Tran, Donald; Henderson, Gena; Barth, Tim

2010-01-01

The Constellation Program (CxP) Orion vehicle goes through several areas and stages of processing before its launched at the Kennedy Space Center. In order to have efficient and effective processing, all of the activities need to be analyzed. This was accomplished by first developing a timeline of events that included each activity, and then each activity was analyzed by operability experts and human factors experts with spacecraft processing experience. This papers focus is to explain the results and the process for developing this human factors operability timeline analysis to improve the processing flow of Orion.

Processing and Prolonged 500 C Testing of 4H-SiC JFET Integrated Circuits with Two Levels of Metal Interconnect

NASA Technical Reports Server (NTRS)

Spry, David J.; Neudeck, Philip G.; Chen, Liangyu; Lukco, Dorothy; Chang, Carl W.; Beheim, Glenn M.; Krasowski, Michael J.; Prokop, Norman F.

2015-01-01

Complex integrated circuit (IC) chips rely on more than one level of interconnect metallization for routing of electrical power and signals. This work reports the processing and testing of 4H-SiC junction field effect transistor (JFET) prototype IC's with two levels of metal interconnect capable of prolonged operation at 500 C. Packaged functional circuits including 3- and 11-stage ring oscillators, a 4-bit digital to analog converter, and a 4-bit address decoder and random access memory cell have been demonstrated at 500 C. A 3-stage oscillator functioned for over 3000 hours at 500 C in air ambient. Improved reproducibility remains to be accomplished.

Analog Signal Pre-Processing For The Fermilab Main Injector BPM Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saewert, A. L.; Rapisarda, S. M.; Wendt, M.

2006-11-20

An analog signal pre-processing scheme was developed, in the framework of the Fermilab Main Injector Beam Position Monitor (BPM) Upgrade, to interface BPM pickup signals to the new digital receiver based read-out system. A key component is the 8-channel electronics module, which uses separate frequency-selective gain stages to acquire 53 MHz bunched proton and 2.5 MHz antiproton signals. Related hardware includes a filter and combiner box to sum pickup electrode signals in the tunnel. A controller module allows local/remote control of gain settings and activation of gain stages and supplies test signals. Theory of operation, system overview, and some designmore » details are presented, as well as first beam measurements of the prototype hardware.« less

(Why) Does Evolution Favour Embryogenesis?

PubMed

Rensing, Stefan A

2016-07-01

Complex multicellular organisms typically possess life cycles in which zygotes (formed by gamete fusion) and meiosis occur. Canonical animal embryogenesis describes development from zygote to birth. It involves polarisation of the egg/zygote, asymmetric cell divisions, establishment of axes, symmetry breaking, formation of organs, and parental nutrition (at least in early stages). Similar developmental patterns have independently evolved in other eukaryotic lineages, including land plants and brown algae. The question arises whether embryo-like structures and associated developmental processes recurrently emerge because they are local optima of the evolutionary landscape. To understand which evolutionary principles govern complex multicellularity, we need to analyse why and how similar processes evolve convergently - von Baer's and Haeckel's phylotypic stage revisited in other phyla. Copyright © 2016 Elsevier Ltd. All rights reserved.

A noninterference blade vibration measurement system for gas turbine engines

NASA Astrophysics Data System (ADS)

Watkins, William B.; Chi, Ray M.

1987-06-01

A noninterfering blade vibration system has been demonstrated in tests of a gas turbine first stage fan. Conceptual design of the system, including its theory, design of case mounted probes, and data acquisition and signal processing hardware was done in a previous effort. The current effort involved instrumentation of an engine fan stage with strain gages; data acquisition using shaft-mounted reference and case-mounted optical probes; recording of data on a wideband tape recorder; and posttest processing using off-line analysis in a facility computer and a minicomputer-based readout system designed for near- real-time readout. Results are presented in terms of true blade vibration frequencies, time and frequency dependent vibration amplitudes and comparison of the optical noninterference results with strain gage readings.

Inequality, poverty and development.

PubMed

Ahluwalia, M S

1976-12-01

Dicussion explores the nature of the relationship between the distribution of income and the process of development on the basis of cross country data on income inequality. The results presented are based on a sample of 60 countries, including 40 developing countries, 14 developed countries, and 6 socialist countries. The approach adopted is essentially exploratory. Multivariate regression analysis was used to estimate cross country relationships between the income shares of different percentile groups and selected variables reflecting aspects of the development process which are likely to influence income inequality. The estimated equations are then used as a basis for broad generalizations about the relationship between income distribution and development. There was strong support for the proposition that relative inequaltiy increases substantially in the early stages of development, with a reversal of this tendency in the later stages. The propositions held whether the sample was restricted to developing countries or expanded to include developed and socialist countries. The process was most prolonged for the poorest group. There were a number of processes occurring "pari passu" with development which were correlated with income inequality and which can plausibly be interpreted as causal. These were intersectoral shifts in the structure of production, expansion in education attainment and skill level of the labor force; and reduction in the growth of population. The operation of these processes appeared to explain some of the improvement in income distribution observed in the later stages of development, but they did not serve to explain the marked deterioration observed in the earlier stages. The cross section results failed to support the stronger hypothesis that the deterioration in relative inequality reflected a prolonged absolute impoverishment of large sections of the population in the course of development. The cross country pattern showed average absolute incomes of the lower percentile groups rising as per capita gross national product rises, although slower than for upper income groups. The cross section results failed to support the view that a faster rate of growth is systematically associated with higher inequality than can be expected given the state of development realized. An appendix identifies data sources and problems.

Human trafficking and health: a conceptual model to inform policy, intervention and research.

PubMed

Zimmerman, Cathy; Hossain, Mazeda; Watts, Charlotte

2011-07-01

Human trafficking is an international crime renowned for extreme forms of violence against women, men and children. Although trafficking-related violence has been well-documented, the health of trafficked persons has been a largely neglected topic. For people who are trafficked, health risks and consequences may begin before they are recruited into the trafficking process, continue throughout the period of exploitation and persist even after individuals are released. Policy-making, service provision and research often focus narrowly on criminal violations that occur during the period of exploitation, regularly overlooking the health implications of trafficking. Similarly, the public health sector has not yet incorporated human trafficking as a health concern. We present a conceptual model that highlights the migratory and exploitative nature of a multi-staged trafficking process, which includes: 'recruitment', travel-transit', 'exploitation' and 'integration' or 'reintegration', and for some trafficked persons, 'detention' and 're-trafficking' stages. Trafficked persons may suffer from physical, sexual and psychological harm, occupational hazards, legal restrictions and difficulties associated with being marginalised or stigmatised. Researchers and decision-makers will benefit from a theoretical approach that conceptualizes trafficking and health as a multi-staged process of cumulative harm. To address a health risk such as trafficking, which spans geographical boundaries and involves multiple sectors, including immigration and law enforcement, labour, social and health services, interventions must be coordinated between nations and across sectors to promote the protection and recovery of people who are trafficked. Copyright © 2011 Elsevier Ltd. All rights reserved.

[Technical efficiency of traditional hospitals and public enterprises in Andalusia (Spain)].

PubMed

Herrero Tabanera, Luis; Martín Martín, José Jesús; López del Amo González, Ma del Puerto

2015-01-01

To assess the technical efficiency of traditional public hospitals without their own legal identity and subject to administrative law, and that of public enterprise hospitals, with their own legal identities and partly governed by private law, all of them belonging to the taxypayer-funded health system of Andalusia during the period 2005 -2008. The study included the 32 publicly-owned hospitals in Andalusia during the period 2005-2008. The method consisted of two stages. In the first stage, the indices of technical efficiency of the hospitals were calculated using Data Envelopment Analysis, and the change in total factor productivity was estimated using the Malmquist index. The results were compared according to perceived quality, and a sensitivity analysis was conducted through an auxiliary model and bootstrapping. In the second stage, a bivariate analysis was performed between hospital efficiency and organization type. Public enterprises were more efficient than traditional hospitals (on average by over 10%) in each of the study years. Nevertheless, a process of convergence was observed between the two types of organizations because, while the efficiency of traditional hospitals increased slightly (by 0.50%) over the study period, the performance of public enterprises declined by over 2%. The possible reasons for the greater efficiency of public enterprises include their greater budgetary and employment flexibility. However, the convergence process observed points to a process of mutual learning that is not necessarily efficient. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Ovarian follicular development in the hawksbill turtle (Cheloniidae: Eretmochelys imbricata L.).

PubMed

Pérez-Bermúdez, Emir; Ruiz-Urquiola, Ariel; Lee-González, Idania; Petric, Benjamin; Almaguer-Cuenca, Nilda; Sanz-Ochotorena, Ana; Espinosa-López, Georgina

2012-12-01

Ovarian follicular development is an essential process in the determination of maturation stages associated with size. This association acquires importance when managing populations of threatened species. We histologically processed 11 prepubescent ovaries, four pubescent ovaries, and one breeding adult ovary with vitellogenic follicles using specific staining techniques to identify the follicular stages of Eretmochelys imbricata. Follicular stages were compared with maturation stages [including straight carapace length (SCL)]. The ovary presented several germinal beds and a lacunar system less histochemically and morphologically heterogeneous than that of crocodiles. During previtellogenesis (four stages), the oocyte grows rapidly due to the strong transcriptional activity of lampbrush chromosomes and numerous nucleoli, and the strong metabolism associated with lipid synthesis. The Stage III ooplasm showed a Sudan positive band. This stage was the most frequent in all ovarian sections and it was independent of maximal follicular stage. Stage IV, more frequent in pubescent and adult ovaries, presented a lipid vacuole-rich ooplasm and a broadening of the zona pellucida and the theca. The vitellogenesis begins with the penetration and accumulation of spherical glycoprotein yolk platelets and chemically neutral lipid droplets which are observed to be mixed, but spatially and chemically segregated. Both the yolk platelets and lipid droplets increase in size, density, and proximity to the periphery of the oocyte due to their coalescence. The SCL of the immature females did not determine the maximal follicular stage nor its frequency in the ovaries. Straight carapace length turned out to be an imprecise measure in identifying the presence of follicular stages in females larger than the minimum legal size limit in Cuba. Consequently, for a national conservation program to be successful, it must emphasize the critically endangered status of E. imbricata, as well as the maturity of the most frequent hawksbill sizes encountered in the Cuban archipelago fishery. Copyright © 2012 Wiley Periodicals, Inc.

The Mediator Complex and Transcription Elongation

PubMed Central

Conaway, Ronald C.; Conaway, Joan Weliky

2013-01-01

Background Mediator is an evolutionarily conserved multisubunit RNA polymerase II (Pol II) coregulatory complex. Although Mediator was initially found to play a critical role in regulation of the initiation of Pol II transcription, recent studies have brought to light an expanded role for Mediator at post-initiation stages of transcription. Scope of review We provide a brief description of the structure of Mediator and its function in the regulation of Pol II transcription initiation, and we summarize recent findings implicating Mediator in the regulation of various stages of Pol II transcription elongation. Major conclusions Emerging evidence is revealing new roles for Mediator in nearly all stages of Pol II transcription, including initiation, promoter escape, elongation, pre-mRNA processing, and termination. General significance Mediator plays a central role in the regulation of gene expression by impacting nearly all stages of mRNA synthesis. PMID:22983086

Staged regenerative sorption heat pump

NASA Technical Reports Server (NTRS)

Jones, Jack A. (Inventor)

1995-01-01

A regenerative adsorbent heat pump process and system for cooling and heating a space. A sorbent is confined in a plurality of compressors of which at least four are first stage and at least four are second stage. The first stage operates over a first pressure region and the second stage over a second pressure region which is higher than the first. Sorbate from the first stage enters the second stage. The sorbate loop includes a condenser, expansion valve, evaporator and the compressors. A single sorbate loop can be employed for single-temperature-control such as air conditioning and heating. Two sorbate loops can be used for two-temperature-control as in a refrigerator and freezer. The evaporator temperatures control the freezer and refrigerator temperatures. Alternatively the refrigerator temperature can be cooled by the freezer with one sorbate loop. A heat transfer fluid is circulated in a closed loop which includes a radiator and the compressors. Low temperature heat is exhausted by the radiator. High temperature heat is added to the heat transfer fluid entering the compressors which are desorbing vapor. Heat is transferred from compressors which are sorbing vapor to the heat transfer fluid, and from the heat transfer fluid to the compressors which are desorbing vapor. Each compressor is subjected to the following phases, heating to its highest temperature, cooling down from its highest temperature, cooling to its lowest temperature, and warming up from its lowest temperature. The phases are repeated to complete a cycle and regenerate heat.

FRAMEWORK FOR ASSESSING RISKS OF ...

EPA Pesticide Factsheets

The Framework for Children's Health Risk Assessment report can serve as a resource on children's health risk assessment and it addresses the need to provide a comprehensive and consistent framework for considering children in risk assessments at EPA. This framework lays out the process, points to existing published sources for more detailed information on life stage-specific considerations, and includes web links to specific online publications and relevant Agency science policy papers, guidelines and guidance. The document emphasizes the need to take into account the potential exposures to environmental agents during preconception and all stages of development and focuses on the relevant adverse health outcomes that may occur as a result of such exposures. This framework is not an Agency guideline, but rather describes the overall structure and the components considered important for children's health risk assessment. The document describes an approach that includes problem formulation, analysis, and risk characterization, and also builds on Agency experience assessing risk to susceptible populations. The problem formulation step focuses on the life stage-specific nature of the analysis to include scoping and screening level questions for hazard characterization, dose response and exposure assessment. The risk characterization step recognizes the need to consider life stage-specific risks and explicitly describes the uncertainties and variability in the d

The Transformation Process in Nurses Caring for Dying Patients.

PubMed

Huang, Ching-Chi; Chen, Jih-Yuan; Chiang, Hsien-Hsien

2016-06-01

Despite the recent increase in attention to end-of-life hospice care, little empirical evidence regarding the process of emotional or mental transformation in caregivers is available. This study explores the transformative process that occurs in nurses because of the spiritual suffering and conflict associated with after caring for dying patients. A phenomenological approach was used to investigate eight nurses (27-40 years old) working in the hospice ward of a medical center in Taipei. Data were collected through open-ended questions using semistructured interviews and were analyzed reflectively. A three-stage transformation in the emotional processes of participants was observed. In the first stage, the participants experienced acute emotional suffering because of facing the death of their patients, potentially exacerbated by their own memories of losing family members. In the second stage, the participants adopted coping strategies to improve self-care. These strategies included attempting to soothe patients, helping patients face or deal with unfulfilled business, and participating in funeral or memorial services. In the third stage, the participants learned to provide better care through emancipatory reflection and a reassertion of responsibilities toward the self, patients, and patient families. After the third stage, the initial emotional impact morphed into a medium for self-strengthening, and participants became more adept at detecting patient needs and at providing care to complete the transformational process fully. Emotional suffering was the primary factor that induced participants to transform their personal and professional selves. Adequate emotional self-management, dialogue with other nurses, and personal reflection are crucial actions that nurses may use to cultivate personal growth, implement ethical practice, interact with other nurses, and engage in personal reflection. Strategies such as caring for patients, implementing reflective nursing practices, focusing on patient needs, and utilizing past experiences enable nurses to develop a heightened sense of responsibility and awareness, thus empowering them to take better care of themselves and their patients.

Micro electro-mechanical heater

DOEpatents

Oh, Yunje; Asif, Syed Amanulla Syed; Cyrankowski, Edward; Warren, Oden Lee

2016-04-19

A sub-micron scale property testing apparatus including a test subject holder and heating assembly. The assembly includes a holder base configured to couple with a sub-micron mechanical testing instrument and electro-mechanical transducer assembly. The assembly further includes a test subject stage coupled with the holder base. The test subject stage is thermally isolated from the holder base. The test subject stage includes a stage subject surface configured to receive a test subject, and a stage plate bracing the stage subject surface. The stage plate is under the stage subject surface. The test subject stage further includes a heating element adjacent to the stage subject surface, the heating element is configured to generate heat at the stage subject surface.

Micro electro-mechanical heater

DOEpatents

Oh, Yunje; Asif, Syed Amanulla Syed; Cyrankowski, Edward; Warren, Oden Lee

2017-09-12

A sub-micron scale property testing apparatus including a test subject holder and heating assembly. The assembly includes a holder base configured to couple with a sub-micron mechanical testing instrument and electro-mechanical transducer assembly. The assembly further includes a test subject stage coupled with the holder base. The test subject stage is thermally isolated from the holder base. The test subject stage includes a stage subject surface configured to receive a test subject, and a stage plate bracing the stage subject surface. The stage plate is under the stage subject surface. The test subject stage further includes a heating element adjacent to the stage subject surface, the heating element is configured to generate heat at the stage subject surface.

Identifying medication error chains from critical incident reports: a new analytic approach.

PubMed

Huckels-Baumgart, Saskia; Manser, Tanja

2014-10-01

Research into the distribution of medication errors usually focuses on isolated stages within the medication use process. Our study aimed to provide a novel process-oriented approach to medication incident analysis focusing on medication error chains. Our study was conducted across a 900-bed teaching hospital in Switzerland. All reported 1,591 medication errors 2009-2012 were categorized using the Medication Error Index NCC MERP and the WHO Classification for Patient Safety Methodology. In order to identify medication error chains, each reported medication incident was allocated to the relevant stage of the hospital medication use process. Only 25.8% of the reported medication errors were detected before they propagated through the medication use process. The majority of medication errors (74.2%) formed an error chain encompassing two or more stages. The most frequent error chain comprised preparation up to and including medication administration (45.2%). "Non-consideration of documentation/prescribing" during the drug preparation was the most frequent contributor for "wrong dose" during the administration of medication. Medication error chains provide important insights for detecting and stopping medication errors before they reach the patient. Existing and new safety barriers need to be extended to interrupt error chains and to improve patient safety. © 2014, The American College of Clinical Pharmacology.

Recovery in Psychosis: A Delphi Study With Experts by Experience

PubMed Central

Law, Heather; Morrison, Anthony P.

2014-01-01

This study aimed to establish consensus about the meaning of recovery among individuals with experience of psychosis. A Delphi approach was utilized to allow a large sample of service users to be anonymously consulted about their views on recovery. Service users were invited to take part in a 3-stage consultation process. A total of 381 participants gave their views on recovery in the main stage of this study, with 100 of these taking part in the final review stage. The final list of statements about recovery included 94 items, which were rated as essential or important by >80% of respondents. These statements covered items which define recovery, factors which help recovery, factors which hinder recovery, and factors which show that someone is recovering. As far as we are aware, it is the first study to identify areas of consensus in relation to definitions of recovery from a service user perspective, which are typically reported to be an idiosyncratic process. Implications and recommendations for clinical practice and future research are discussed. PMID:24727194

Space Launch System Booster Separation Aerodynamic Database Development and Uncertainty Quantification

NASA Technical Reports Server (NTRS)

Chan, David T.; Pinier, Jeremy T.; Wilcox, Floyd J., Jr.; Dalle, Derek J.; Rogers, Stuart E.; Gomez, Reynaldo J.

2016-01-01

The development of the aerodynamic database for the Space Launch System (SLS) booster separation environment has presented many challenges because of the complex physics of the ow around three independent bodies due to proximity e ects and jet inter- actions from the booster separation motors and the core stage engines. This aerodynamic environment is dicult to simulate in a wind tunnel experiment and also dicult to simu- late with computational uid dynamics. The database is further complicated by the high dimensionality of the independent variable space, which includes the orientation of the core stage, the relative positions and orientations of the solid rocket boosters, and the thrust lev- els of the various engines. Moreover, the clearance between the core stage and the boosters during the separation event is sensitive to the aerodynamic uncertainties of the database. This paper will present the development process for Version 3 of the SLS booster separa- tion aerodynamic database and the statistics-based uncertainty quanti cation process for the database.

Micellar casein concentrate production with a 3X, 3-stage, uniform transmembrane pressure ceramic membrane process at 50°C.

PubMed

Hurt, E; Zulewska, J; Newbold, M; Barbano, D M

2010-12-01

The production of serum protein (SP) and micellar casein from skim milk can be accomplished using microfiltration (MF). Potential commercial applications exist for both SP and micellar casein. Our research objective was to determine the total SP removal and SP removal for each stage, and the composition of retentates and permeates, for a 3×, continuous bleed-and-feed, 3-stage, uniform transmembrane pressure (UTP) system with 0.1-μm ceramic membranes, when processing pasteurized skim milk at 50°C with 2 stages of water diafiltration. For each of 4 replicates, about 1,100 kg of skim milk was pasteurized (72°C, 16s) and processed at 3× through the UTP MF system. Retentate from stage 1 was cooled to <4°C and stored until the next processing day, when it was diluted with reverse osmosis water back to a 1× concentration and again processed through the MF system (stage 2) to a 3× concentration. The retentate from stage 2 was stored at <4°C, and, on the next processing day, was diluted with reverse osmosis water back to a 1× concentration, before running through the MF system at 3× for a total of 3 stages. The retentate and permeate from each stage were analyzed for total nitrogen, noncasein nitrogen, and nonprotein nitrogen using Kjeldahl methods; sodium dodecyl sulfate-PAGE analysis was also performed on the retentates from each stage. Theoretically, a 3-stage, 3× MF process could remove 97% of the SP from skim milk, with a cumulative SP removal of 68 and 90% after the first and second stages, respectively. The cumulative SP removal using a 3-stage, 3× MF process with a UTP system with 0.01-μm ceramic membranes in this experiment was 64.8 ± 0.8, 87.8 ± 1.6, and 98.3 ± 2.3% for the first, second, and third stages, respectively, when calculated using the mass of SP removed in the permeate of each stage. Various methods of calculation of SP removal were evaluated. Given the analytical limitations in the various methods for measuring SP removal, calculation of SP removal based on the mass of SP in the skim milk (determined by Kjeldahl) and the mass SP present in all of the permeate produced by the process (determined by Kjeldahl) provided the best estimate of SP removal for an MF process. Copyright © 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Oxygen radical absorbance capacity of different varieties of strawberry and the antioxidant stability in storage.

PubMed

Li, Chunyang; Huang, Wu-Yang; Wang, Xing-Na; Liu, Wen-Xu

2013-01-25

Total antioxidant capacity of different varieties of strawberry (Ningfeng, Ningyu, Zijin 4, Toyonoka, Benihope, Sweet Charlie) in different developmental stages (including green unripe stages, half red stages, and red ripe stages) was investigated by oxygen radical absorbance capacity (ORAC) assay. In addition, effects of the antioxidant properties of strawberry stored at 4 °C or -18 °C for a period of five months were studied. The results showed that antioxidant capacity of strawberry changed based on tested part, developmental stage, variety, and time of collection. Calyces had significantly higher ORAC values compared with fruits. Strawberry fruits had higher ORAC values during the green unripe stages than the half red stages and red ripe stages. Strawberries got higher ORAC values during short-time storage, and then decreased during long-time storage. Samples stored at -18 °C exhibited higher antioxidant capacity than those stored at 4 °C, while vacuum treatment could further increase ORAC values. The results indicated the potential market role of strawberries as a functional food and could provide great value in preventing oxidation reaction in food processing and storage for the dietary industry.

Method and system for dual resolution translation stage

DOEpatents

Halpin, John Michael

2014-04-22

A dual resolution translation stage includes a stage assembly operable to receive an optical element and a low resolution adjustment device mechanically coupled to the stage assembly. The dual resolution stage also includes an adjustable pivot block mechanically coupled to the stage assembly. The adjustable pivot block includes a pivot shaft. The dual resolution stage further includes a lever arm mechanically coupled to the adjustable pivot block. The lever arm is operable to pivot about the pivot shaft. The dual resolution stage additionally includes a high resolution adjustment device mechanically coupled to the lever arm and the stage assembly.

Technology-Supported Change: A Staff Development Opportunity.

ERIC Educational Resources Information Center

Bradshaw, Lynn K.

1997-01-01

Implementing technology in a classroom is a personal process that varies from teacher to teacher. The Concerns-Based Adoption Model identifies seven stages of concern that teachers may experience, from awareness to refocusing ideas. Innovative staff development strategies include establishing organizational structures to support technological and…

A Free Entry and Exit Experiment.

ERIC Educational Resources Information Center

Garratt, Rod

2000-01-01

Describes a two-stage experiment where students play the role of farmers who must select one of four markets (corn, wheat, rice, or soybeans). Demonstrates the process leading to equilibrium in a multimarket setting. Includes an appendix with the farmer profit chart and homework exercises. (CMK)

Transtheoretical Model of Change during Travel Behavior Interventions: An Integrative Review.

PubMed

Friman, Margareta; Huck, Jana; Olsson, Lars E

2017-05-30

This study aims to identify the relevant empirical work, to synthesize its findings, and to thus attain a general understanding of the application of the Transtheoretical Model (TTM) in transport behavior research. An integrative literature review was used to determine whether or not the implemented interventions impact the stages and processes of travel behavior change. Data was collected from different databases. English language articles published between 2002 and 2017 were included. After sequentially narrowing the search and removing duplicates, 53 relevant papers remained, 13 of which fulfilled the stated criteria of constituting a transport intervention study using the TTM as a reference frame. The final 13 studies were classified and categorized according to stages and processes in the TTM. Findings showed that none of the interventions met the method requirements for a proper evaluation of design and outcome measurement. Reporting did not follow a standardized structure desirable when enabling comparative analyses. Allowing for these shortcomings, it is inferred that positive travel behavior changes have been obtained during some interventions. Importantly, although it was stated that the empirical studies were based on the TTM, the included interventions were implemented irrespective of the individual's stage of change. For future research, it will be necessary to conduct evaluations of higher quality.

Transtheoretical Model of Change during Travel Behavior Interventions: An Integrative Review

PubMed Central

Friman, Margareta; Huck, Jana; Olsson, Lars E.

2017-01-01

This study aims to identify the relevant empirical work, to synthesize its findings, and to thus attain a general understanding of the application of the Transtheoretical Model (TTM) in transport behavior research. An integrative literature review was used to determine whether or not the implemented interventions impact the stages and processes of travel behavior change. Data was collected from different databases. English language articles published between 2002 and 2017 were included. After sequentially narrowing the search and removing duplicates, 53 relevant papers remained, 13 of which fulfilled the stated criteria of constituting a transport intervention study using the TTM as a reference frame. The final 13 studies were classified and categorized according to stages and processes in the TTM. Findings showed that none of the interventions met the method requirements for a proper evaluation of design and outcome measurement. Reporting did not follow a standardized structure desirable when enabling comparative analyses. Allowing for these shortcomings, it is inferred that positive travel behavior changes have been obtained during some interventions. Importantly, although it was stated that the empirical studies were based on the TTM, the included interventions were implemented irrespective of the individual’s stage of change. For future research, it will be necessary to conduct evaluations of higher quality. PMID:28556810

Assessing the Queuing Process Using Data Envelopment Analysis: an Application in Health Centres.

PubMed

Safdar, Komal A; Emrouznejad, Ali; Dey, Prasanta K

2016-01-01

Queuing is one of the very important criteria for assessing the performance and efficiency of any service industry, including healthcare. Data Envelopment Analysis (DEA) is one of the most widely-used techniques for performance measurement in healthcare. However, no queue management application has been reported in the health-related DEA literature. Most of the studies regarding patient flow systems had the objective of improving an already existing Appointment System. The current study presents a novel application of DEA for assessing the queuing process at an Outpatients' department of a large public hospital in a developing country where appointment systems do not exist. The main aim of the current study is to demonstrate the usefulness of DEA modelling in the evaluation of a queue system. The patient flow pathway considered for this study consists of two stages; consultation with a doctor and pharmacy. The DEA results indicated that waiting times and other related queuing variables included need considerable minimisation at both stages.

Identification of defense-related genes newly-associated with tomato flower abscission.

PubMed

Meir, Shimon; Philosoph-Hadas, Sonia; Sundaresan, Srivignesh; Selvaraj, K S Vijay; Burd, Shaul; Ophir, Ron; Kochanek, K S Bettina; Reid, Michael S; Jiang, Cai-Zhong; Lers, Amnon

2011-04-01

The current abscission model suggests the formation of a post-abscission trans-differentiation of a protective layer as the last step of the process. The present report expands the repertoire of genes activated in the tomato flower abscission zone (AZ), which are likely to be involved in defense responses. We identified four different defense-related genes, including: Cysteine-type endopeptidase, α-Dioxygenase 1 (α-DOX1), HopW-1-1-Interacting protein2 (WIN2), and Stomatal-derived factor-2 (SDF2), that are newly-associated with the late stage of the abscission process. The late expression of these genes, induced at 8-14 h after flower removal when pedicel abscission was already in progress, was AZ-specific, and was inhibited by treatments that prevented pedicel abscission, including 1-methylcyclopropene pretreatment or IAA application. This information supports the activation of different defense responses and strategies at the late abscission stages, which may enable efficient protection of the exposed tissue toward different environmental stresses.

Integration of Treatment Innovation Planning and Implementation: Strategic Process Models and Organizational Challenges

PubMed Central

Lehman, Wayne E. K.; Simpson, D. Dwayne; Knight, Danica K.; Flynn, Patrick M.

2015-01-01

Sustained and effective use of evidence-based practices in substance abuse treatment services faces both clinical and contextual challenges. Implementation approaches are reviewed that rely on variations of plan-do-study-act (PDSA) cycles, but most emphasize conceptual identification of core components for system change strategies. A 2-phase procedural approach is therefore presented based on the integration of TCU models and related resources for improving treatment process and program change. Phase 1 focuses on the dynamics of clinical services, including stages of client recovery (cross-linked with targeted assessments and interventions), as the foundations for identifying and planning appropriate innovations to improve efficiency and effectiveness. Phase 2 shifts to the operational and organizational dynamics involved in implementing and sustaining innovations (including the stages of training, adoption, implementation, and practice). A comprehensive system of TCU assessments and interventions for client and program-level needs and functioning are summarized as well, with descriptions and guidelines for applications in practical settings. PMID:21443294

Neurobiological correlates of cognitions in fear and anxiety: a cognitive-neurobiological information-processing model.

PubMed

Hofmann, Stefan G; Ellard, Kristen K; Siegle, Greg J

2012-01-01

We review likely neurobiological substrates of cognitions related to fear and anxiety. Cognitive processes are linked to abnormal early activity reflecting hypervigilance in subcortical networks involving the amygdala, hippocampus, and insular cortex, and later recruitment of cortical regulatory resources, including activation of the anterior cingulate cortex and prefrontal cortex to implement avoidant response strategies. Based on this evidence, we present a cognitive-neurobiological information-processing model of fear and anxiety, linking distinct brain structures to specific stages of information processing of perceived threat.

A 4H Silicon Carbide Gate Buffer for Integrated Power Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ericson, N; Frank, S; Britton, C

2014-02-01

A gate buffer fabricated in a 2-mu m 4H silicon carbide (SiC) process is presented. The circuit is composed of an input buffer stage with a push-pull output stage, and is fabricated using enhancement mode N-channel FETs in a process optimized for SiC power switching devices. Simulation and measurement results of the fabricated gate buffer are presented and compared for operation at various voltage supply levels, with a capacitive load of 2 nF. Details of the design including layout specifics, simulation results, and directions for future improvement of this buffer are presented. In addition, plans for its incorporation into anmore » isolated high-side/low-side gate-driver architecture, fully integrated with power switching devices in a SiC process, are briefly discussed. This letter represents the first reported MOSFET-based gate buffer fabricated in 4H SiC.« less

Spatiotemporal Dynamics of Bilingual Word Processing

PubMed Central

Leonard, Matthew K.; Brown, Timothy T.; Travis, Katherine E.; Gharapetian, Lusineh; Hagler, Donald J.; Dale, Anders M.; Elman, Jeffrey L.; Halgren, Eric

2009-01-01

Studies with monolingual adults have identified successive stages occurring in different brain regions for processing single written words. We combined magnetoencephalography and magnetic resonance imaging to compare these stages between the first (L1) and second (L2) languages in bilingual adults. L1 words in a size judgment task evoked a typical left-lateralized sequence of activity first in ventral occipitotemporal cortex (VOT: previously associated with visual word-form encoding), and then ventral frontotemporal regions (associated with lexico-semantic processing). Compared to L1, words in L2 activated right VOT more strongly from ~135 ms; this activation was attenuated when words became highly familiar with repetition. At ~400ms, L2 responses were generally later than L1, more bilateral, and included the same lateral occipitotemporal areas as were activated by pictures. We propose that acquiring a language involves the recruitment of right hemisphere and posterior visual areas that are not necessary once fluency is achieved. PMID:20004256

Integrative analyses of human reprogramming reveal dynamic nature of induced pluripotency

PubMed Central

Cacchiarelli, Davide; Trapnell, Cole; Ziller, Michael J.; Soumillon, Magali; Cesana, Marcella; Karnik, Rahul; Donaghey, Julie; Smith, Zachary D.; Ratanasirintrawoot, Sutheera; Zhang, Xiaolan; Ho Sui, Shannan J.; Wu, Zhaoting; Akopian, Veronika; Gifford, Casey A.; Doench, John; Rinn, John L.; Daley, George Q.; Meissner, Alexander; Lander, Eric S.; Mikkelsen, Tarjei S.

2015-01-01

Summary Induced pluripotency is a promising avenue for disease modeling and therapy, but the molecular principles underlying this process, particularly in human cells, remain poorly understood due to donor-to-donor variability and intercellular heterogeneity. Here we constructed and characterized a clonal, inducible human reprogramming system that provides a reliable source of cells at any stage of the process. This system enabled integrative transcriptional and epigenomic analysis across the human reprogramming timeline at high resolution. We observed distinct waves of gene network activation, including the ordered reactivation of broad developmental regulators followed by early embryonic patterning genes and culminating in the emergence of a signature reminiscent of pre-implantation stages. Moreover, complementary functional analyses allowed us to identify and validate novel regulators of the reprogramming process. Altogether, this study sheds light on the molecular underpinnings of induced pluripotency in human cells and provides a robust cell platform for further studies. PMID:26186193

Autoheated thermophilic aerobic digestion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deeny, K.; Hahn, H.; Leonhard, D.

1991-10-01

Autothermal thermophilic aerobic digestion (ATAD) is first and foremost a digestion process, the primary purpose of which is to decompose a portion of the waste organic solids generated from wastewater treatment. As a result of the high operating temperature, digestion is expected to occur within a short time period (6 days) and accomplish a high degree of pathogen reduction. ATAD systems are two-stage aerobic digestion processes that operate under thermophilic temperature conditions (40 to 80C) without supplemental heat. Like composting, the systems rely on the conservation of heat released during digestion itself to attain and sustain the desired operating temperature.more » Typical ATAD systems operate at 55C and may reach temperatures of 60 to 65C in the second-stage reactor. Perhaps because of the high operating temperature, this process has been referred to as Liquid Composting.' Major advantages associated with thermophilic operation include high biological reaction rates and a substantial degree of pathogen reduction.« less

Investigating co-combustion characteristics of bamboo and wood.

PubMed

Liang, Fang; Wang, Ruijuan; Jiang, Changle; Yang, Xiaomeng; Zhang, Tao; Hu, Wanhe; Mi, Bingbing; Liu, Zhijia

2017-11-01

To investigate co-combustion characteristics of bamboo and wood, moso bamboo and masson pine were torrefied and mixed with different blend ratios. The combustion process was examined by thermogravimetric analyzer (TGA). The results showed the combustion process of samples included volatile emission and oxidation combustion as well as char combustion. The main mass loss of biomass blends occurred at volatile emission and oxidation combustion stage, while that of torrefied biomass occurred at char combustion stage. With the increase of bamboo content, characteristic temperatures decreased. Compared with untreated biomass, torrefied biomass had a higher initial and burnout temperature. With the increase of heating rates, combustion process of samples shifted to higher temperatures. Compared with non-isothermal models, activation energy obtained from isothermal model was lower. The result is helpful to promote development of co-combustion of bamboo and masson pine wastes. Copyright © 2017 Elsevier Ltd. All rights reserved.

The ideas about advanced life support and affecting factors at the end-stage of life in a hospital in Turkey.

PubMed

Albayrak, Turgay; Şencan, İrfan; Akça, Ömer; Koç, Esra Meltem; Aksoy, Hilal; Ünsal, Selim; Bülbül, İskender; Bahadır, Adem; Kasım, İsmail; Kahveci, Rabia; Özkara, Adem

2017-01-01

The participation of the people in health decisions may be structured in various levels. One of these is participation in decisions for the treatment. "Advanced directives" is one of the examples for the participation in decisions for the treatment. We wanted to determine the decisions on advanced life support at the end-stage of life in case of a life-threatening illness for the people themselves and their first degree relatives and the factors effecting these decisions. The cross-sectional study was conducted with volunteers among patients and patient relatives who applied to all polyclinics of the Ankara Numune Training and Research Hospital except the emergency, oncology and psychiatry polyclinics between 15.12.2012 and 15.03.2013. A questionnaire, the Hospital Anxiety Depression (HAD) scale, and Templer's Death Anxiety Scale (TDA) were applied to all individuals. SPSS for Win. Ver. 17.0 and MS-Excel 2010 Starter software bundles were used for all statistical analysis and calculations. The participants want both themselves and their first degree relatives included in end-stage decision-making process. Therefore, the patients and their families should be informed adequately during decision making process and quality communication must be provided. Participants who have given their end-stage decisions previously want to be treated according to these decisions. This desire can just be possible by advanced directives.When moral and material loads of end-stage process are taken into consideration, countries, in which advanced directives are practiced, should be examined well and participants' desire should be evaluated in terms of practicability.

Modeling metabolism and stage-specific growth of Plasmodium falciparum HB3 during the intraerythrocytic developmental cycle.

PubMed

Fang, Xin; Reifman, Jaques; Wallqvist, Anders

2014-10-01

The human malaria parasite Plasmodium falciparum goes through a complex life cycle, including a roughly 48-hour-long intraerythrocytic developmental cycle (IDC) in human red blood cells. A better understanding of the metabolic processes required during the asexual blood-stage reproduction will enhance our basic knowledge of P. falciparum and help identify critical metabolic reactions and pathways associated with blood-stage malaria. We developed a metabolic network model that mechanistically links time-dependent gene expression, metabolism, and stage-specific growth, allowing us to predict the metabolic fluxes, the biomass production rates, and the timing of production of the different biomass components during the IDC. We predicted time- and stage-specific production of precursors and macromolecules for P. falciparum (strain HB3), allowing us to link specific metabolites to specific physiological functions. For example, we hypothesized that coenzyme A might be involved in late-IDC DNA replication and cell division. Moreover, the predicted ATP metabolism indicated that energy was mainly produced from glycolysis and utilized for non-metabolic processes. Finally, we used the model to classify the entire tricarboxylic acid cycle into segments, each with a distinct function, such as superoxide detoxification, glutamate/glutamine processing, and metabolism of fumarate as a byproduct of purine biosynthesis. By capturing the normal metabolic and growth progression in P. falciparum during the IDC, our model provides a starting point for further elucidation of strain-specific metabolic activity, host-parasite interactions, stress-induced metabolic responses, and metabolic responses to antimalarial drugs and drug candidates.

Numerical and experimental analysis of a ducted propeller designed by a fully automated optimization process under open water condition

NASA Astrophysics Data System (ADS)

Yu, Long; Druckenbrod, Markus; Greve, Martin; Wang, Ke-qi; Abdel-Maksoud, Moustafa

2015-10-01

A fully automated optimization process is provided for the design of ducted propellers under open water conditions, including 3D geometry modeling, meshing, optimization algorithm and CFD analysis techniques. The developed process allows the direct integration of a RANSE solver in the design stage. A practical ducted propeller design case study is carried out for validation. Numerical simulations and open water tests are fulfilled and proved that the optimum ducted propeller improves hydrodynamic performance as predicted.

Effect of filter media size, mass flow rate and filtration stage number in a moving-bed granular filter on the yield and properties of bio-oil from fast pyrolysis of biomass.

PubMed

Paenpong, Chaturong; Inthidech, Sudsakorn; Pattiya, Adisak

2013-07-01

Fast pyrolysis of cassava rhizome was performed in a bench-scale fluidised-bed reactor unit incorporated with a cross-flow moving-bed granular filter. The objective of this research was to examine several process parameters including the granular size (425-1160 μm) and mass flow rate (0-12 g/min) as well as the number of the filtration stages (1-2 stages) on yields and properties of bio-oil. The results showed that the bio-oil yield decreased from 57.7 wt.% to 42.0-49.2 wt.% when increasing the filter media size, the mass flow rate and the filtration stage number. The effect of the process parameters on various properties of bio-oil is thoroughly discussed. In general, the bio-oil quality in terms of the solids content, ash content, initial viscosity, viscosity change and ageing rate could be enhanced by the hot vapour granular filtration. Therefore, bio-oil of high stability could be produced by the pyrolysis reactor configuration designed in this work. Copyright © 2013 Elsevier Ltd. All rights reserved.

Israeli co-retorting of coal and oil shale would break even at 22/barrel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Work is being carried out at the Hebrew University of Jerusalem on co-retorting of coal and oil shale. The work is funded under a cooperative agreement with the US Department of Energy. The project is exploring the conversion of US eastern high-sulfur bituminous coal in a split-stage, fluidized-bed reactor. Pyrolysis occurs in the first stage and char combustion in the second stage. These data for coal will be compared with similar data from the same reactor fueled by high-sulfur eastern US oil shale and Israeli oil shales. The project includes research at three major levels: pyrolysis in lab-scale fluidized-bed reactor;more » retorting in split-stage, fluidized-bed bench-scale process (1/4 tpd); and scale-up, preparation of full-size flowchart, and economic evaluation. In the past year's research, a preliminary economic evaluation was completed for a scaled-up process using a feed of high-sulfur coal and carbonate-containing Israeli oil shale. A full-scale plant in Israel was estimated to break even at an equivalent crude oil price of $150/ton ($22/barrel).« less

Identification of Key Pathways and Genes in the Dynamic Progression of HCC Based on WGCNA.

PubMed

Yin, Li; Cai, Zhihui; Zhu, Baoan; Xu, Cunshuan

2018-02-14

Hepatocellular carcinoma (HCC) is a devastating disease worldwide. Though many efforts have been made to elucidate the process of HCC, its molecular mechanisms of development remain elusive due to its complexity. To explore the stepwise carcinogenic process from pre-neoplastic lesions to the end stage of HCC, we employed weighted gene co-expression network analysis (WGCNA) which has been proved to be an effective method in many diseases to detect co-expressed modules and hub genes using eight pathological stages including normal, cirrhosis without HCC, cirrhosis, low-grade dysplastic, high-grade dysplastic, very early and early, advanced HCC and very advanced HCC. Among the eight consecutive pathological stages, five representative modules are selected to perform canonical pathway enrichment and upstream regulator analysis by using ingenuity pathway analysis (IPA) software. We found that cell cycle related biological processes were activated at four neoplastic stages, and the degree of activation of the cell cycle corresponded to the deterioration degree of HCC. The orange and yellow modules enriched in energy metabolism, especially oxidative metabolism, and the expression value of the genes decreased only at four neoplastic stages. The brown module, enriched in protein ubiquitination and ephrin receptor signaling pathways, correlated mainly with the very early stage of HCC. The darkred module, enriched in hepatic fibrosis/hepatic stellate cell activation, correlated with the cirrhotic stage only. The high degree hub genes were identified based on the protein-protein interaction (PPI) network and were verified by Kaplan-Meier survival analysis. The novel five high degree hub genes signature that was identified in our study may shed light on future prognostic and therapeutic approaches. Our study brings a new perspective to the understanding of the key pathways and genes in the dynamic changes of HCC progression. These findings shed light on further investigations.

Quartz resonator processing system

DOEpatents

Peters, Roswell D. M.

1983-01-01

Disclosed is a single chamber ultra-high vacuum processing system for the oduction of hermetically sealed quartz resonators wherein electrode metallization and sealing are carried out along with cleaning and bake-out without any air exposure between the processing steps. The system includes a common vacuum chamber in which is located a rotatable wheel-like member which is adapted to move a plurality of individual component sets of a flat pack resonator unit past discretely located processing stations in said chamber whereupon electrode deposition takes place followed by the placement of ceramic covers over a frame containing a resonator element and then to a sealing stage where a pair of hydraulic rams including heating elements effect a metallized bonding of the covers to the frame.

Localising semantic and syntactic processing in spoken and written language comprehension: an Activation Likelihood Estimation meta-analysis.

PubMed

Rodd, Jennifer M; Vitello, Sylvia; Woollams, Anna M; Adank, Patti

2015-02-01

We conducted an Activation Likelihood Estimation (ALE) meta-analysis to identify brain regions that are recruited by linguistic stimuli requiring relatively demanding semantic or syntactic processing. We included 54 functional MRI studies that explicitly varied the semantic or syntactic processing load, while holding constant demands on earlier stages of processing. We included studies that introduced a syntactic/semantic ambiguity or anomaly, used a priming manipulation that specifically reduced the load on semantic/syntactic processing, or varied the level of syntactic complexity. The results confirmed the critical role of the posterior left Inferior Frontal Gyrus (LIFG) in semantic and syntactic processing. These results challenge models of sentence comprehension highlighting the role of anterior LIFG for semantic processing. In addition, the results emphasise the posterior (but not anterior) temporal lobe for both semantic and syntactic processing. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

Lysine Acetylation in Sexual Stage Malaria Parasites Is a Target for Antimalarial Small Molecules

PubMed Central

Trenholme, Katharine; Marek, Linda; Duffy, Sandra; Pradel, Gabriele; Fisher, Gillian; Hansen, Finn K.; Skinner-Adams, Tina S.; Butterworth, Alice; Ngwa, Che Julius; Moecking, Jonas; Goodman, Christopher D.; McFadden, Geoffrey I.; Sumanadasa, Subathdrage D. M.; Fairlie, David P.; Avery, Vicky M.

2014-01-01

Therapies to prevent transmission of malaria parasites to the mosquito vector are a vital part of the global malaria elimination agenda. Primaquine is currently the only drug with such activity; however, its use is limited by side effects. The development of transmission-blocking strategies requires an understanding of sexual stage malaria parasite (gametocyte) biology and the identification of new drug leads. Lysine acetylation is an important posttranslational modification involved in regulating eukaryotic gene expression and other essential processes. Interfering with this process with histone deacetylase (HDAC) inhibitors is a validated strategy for cancer and other diseases, including asexual stage malaria parasites. Here we confirm the expression of at least one HDAC protein in Plasmodium falciparum gametocytes and show that histone and nonhistone protein acetylation occurs in this life cycle stage. The activity of the canonical HDAC inhibitors trichostatin A (TSA) and suberoylanilide hydroxamic acid (SAHA; Vorinostat) and a panel of novel HDAC inhibitors on early/late-stage gametocytes and on gamete formation was examined. Several compounds displayed early/late-stage gametocytocidal activity, with TSA being the most potent (50% inhibitory concentration, 70 to 90 nM). In contrast, no inhibitory activity was observed in P. falciparum gametocyte exflagellation experiments. Gametocytocidal HDAC inhibitors caused hyperacetylation of gametocyte histones, consistent with a mode of action targeting HDAC activity. Our data identify HDAC inhibitors as being among a limited number of compounds that target both asexual and sexual stage malaria parasites, making them a potential new starting point for gametocytocidal drug leads and valuable tools for dissecting gametocyte biology. PMID:24733477

Characterization and potential role of microRNA in the Chinese dominant malaria mosquito Anopheles sinensis (Diptera: Culicidae) throughout four different life stages.

PubMed

Feng, Xinyu; Wu, Jiatong; Zhou, Shuisen; Wang, Jingwen; Hu, Wei

2018-01-01

microRNAs (miRNAs) are one kind of small non-coding RNAs widely distributed in insects. Many studies have shown that miRNAs play critical roles in development, differentiation, apoptosis, and innate immunity. However, there are a few reports describing miRNAs in Anopheles sinensis , the most common, and one of the dominant malaria mosquito in China. Here, we investigated the global miRNA expression profile across four different developmental stages including embryo, larval, pupal, and adult stages using Illumina Hiseq 2500 sequencing. In total, 164 miRNAs were obtained out of 107.46 million raw sequencing reads. 99 of them identified as known miRNAs, and the remaining 65 miRNAs were considered as novel. By analyzing the read counts of miRNAs in all developmental stages, 95 miRNAs showed stage-specific expression (q < 0.01 and |log2 (fold change)| > 1) in consecutive stages, indicating that these miRNAs may be involved in critical physiological activity during development. Sixteen miRNAs were identified to be commonly dysregulated throughout four developmental stages. Many miRNAs showed stage-specific expression, such as asi-miR-2943 was exclusively expressed in the embryo stage, and asi-miR-1891 could not be detected in larval stage. The expression of six selected differentially expressed miRNAs identified by qRT-PCR were consistent with our sequencing results. Furthermore, 5296 and 1902 target genes were identified for the dysregulated 68 known and 27 novel miRNAs respectively by combining miRanda and RNAhybrid prediction. GO annotation and KEGG pathway analysis for the predicted genes of dysregulated miRNAs revealed that they might be involved in a broad range of biological processes related with the development, such as membrane, organic substance transport and several key pathways including protein processing in endoplasmic reticulum, propanoate metabolism and folate biosynthesis. Thirty-two key miRNAs were identified by microRNA-gene network analysis. The present study represents the first global characterization of An. sinensis miRNAs in its four developmental stages. The presence and differential expression of An. sinensis miRNAs imply that such miRNAs may play critical roles in An. sinensis life cycle. A better understanding of the functions of these miRNAs will have great implication for the effective control of vector population and therefore interrupting malaria transmission.

Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald Boring; Roger Lew; Thomas Ulrich

2014-03-01

As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how themore » process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.« less

The awareness and want matrix with adoption gap ratio analysis for e-service diffusion effect.

PubMed

Liang, Te-Hsin

2011-03-01

Since the hierarchical stages of a customer purchasing decision or innovation adoption process are interrelated, an analysis of all their stages, including awareness, want, and adoption, in relation to product or service diffusion, is urgently needed. Therefore, this study proposes the use of an awareness and want matrix, together with an adoption gap ratio analysis, to assess the effectiveness of innovation and technology diffusion for e-services. This study also conducts an empirical test on the promotion performance evaluation of 12 e-services promoted by the Taiwanese government.

The Surface Layer Mechanical Condition and Residual Stress Forming Model in Surface Plastic Deformation Process with the Hardened Body Effect Consideration

NASA Astrophysics Data System (ADS)

Mahalov, M. S.; Blumenstein, V. Yu

2017-10-01

The mechanical condition and residual stresses (RS) research and computational algorithms creation in complex types of loading on the product lifecycle stages relevance is shown. The mechanical state and RS forming finite element model at surface plastic deformation strengthening machining, including technological inheritance effect, is presented. A model feature is the production previous stages obtained transformation properties consideration, as well as these properties evolution during metal particles displacement through the deformation space in the present loading step.

InSight Atlas V Centaur Stage Offload

NASA Image and Video Library

2018-01-31

Inside Building B7525 at Vandenberg Air Force Base in California, the Centaur upper stage for a United Launch Alliance Atlas V rocket is offloaded from a transport truck. The launch vehicle will send NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, or InSight, spacecraft to land on Mars. InSight is the first mission to explore the Red Planet's deep interior. It will investigate processes that shaped the rocky planets of the inner solar system including Earth. Liftoff from Vandenberg is scheduled for May 5, 2018.

Radioisotope studies in cardiology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biersack, H.J.; Cox, P.H.

1985-01-01

In this text, reviews of all available techniques in this field have been collected, including methods that are still in the developmental stage. After a discussion of the pathophysiology of myocardial perfusion, metabolism, and recent developments in instrumentation, particular chapters are devoted to data processing, radipharmaceuticals, and labelled metabolites. Special references are made to cardiac blood-pool imaging, including evaluations of global and regional ventricular functions and reguritation volumes.

Composting of sewage sludge with solid fraction of digested pulp from agricultural biogas plant

NASA Astrophysics Data System (ADS)

Czekała, Wojciech; Dach, Jacek; Przybył, Jacek; Mazurwiekiwcz, Jakub; Janczak, Damian; Lewicki, Andrzej; Smurzyńska, Anna; Kozłowski, Kamil

2018-02-01

Sewage sludge management is an important element of environmental protection. Composting and anaerobic digestion are the biological conversion methods for sewage sludge management. Mass and volume reduction is a result of a properly composted process. Solid fraction of digested pulp can be use as co-substrate, because it is good structural material. The aim of the study was to determine the possibility of composting sewage sludge with a solid fraction of digestate. The compost mix consisted of 25 kilograms of sewage sludge and 20 kilograms solid fraction of digestate in fresh mass. The experiment was carried out in laboratory conditions. Bioreactors of 165 dm3 volume were used. The experiment included two stages. Stage I took place in bioreactors and lasted until the cooling phase of the compost was complete. Stage II included compost maturation for a period of eight months (to 287 day of composting). The reduction of mass obtained at the end of Stage I amounted 30.2%. At the end of Stage II, it was 86.7% relative to the initial weight of the compost. The maximum value of temperature was 75.1°C. Studies have shown that sludge with a solid fraction of digestate can be a suitable substrate for composting with sewage sludge.

Powder compaction in systems of bimodal distribution

NASA Technical Reports Server (NTRS)

Chattopadhyay, A. K.; Whittemore, O. J., Jr.

1973-01-01

The compaction of mixtures involving different particle sizes is discussed. The various stages of the compaction process include the rearrangement of particles, the filling of the interstices of the large particles by the smaller ones, and the change in particle size and shape upon further densification through the application of pressure. Experimental approaches and equipment used for compacting material are discussed together with the theoretical relations of the compacting process.

Method and apparatus for converting and removing organosulfur and other oxidizable compounds from distillate fuels, and compositions obtained thereby

DOEpatents

D'Alessandro, Robert N.; Tarabocchia, John; Jones, Jerald Andrew; Bonde, Steven E.; Leininger, Stefan

2010-10-26

The present disclosure is directed to a multi-stage system and a process utilizing said system with the design of reducing the sulfur-content in a liquid comprising hydrocarbons and organosulfur compounds. The process comprising at least one of the following states: (1) an oxidation stage; (2) an extraction state; (3) a raffinate washing stage; (4) a raffinate polishing stage; (5) a solvent recovery stage; (6) a solvent purification stage; and (7) a hydrocarbon recovery stage. The process for removing sulfur-containing hydrocarbons from gas oil, which comprises oxidizing gas oil comprising hydrocarbons and organosulfur compounds to obtain a product gas oil.

The PREP pipeline: standardized preprocessing for large-scale EEG analysis

PubMed Central

Bigdely-Shamlo, Nima; Mullen, Tim; Kothe, Christian; Su, Kyung-Min; Robbins, Kay A.

2015-01-01

The technology to collect brain imaging and physiological measures has become portable and ubiquitous, opening the possibility of large-scale analysis of real-world human imaging. By its nature, such data is large and complex, making automated processing essential. This paper shows how lack of attention to the very early stages of an EEG preprocessing pipeline can reduce the signal-to-noise ratio and introduce unwanted artifacts into the data, particularly for computations done in single precision. We demonstrate that ordinary average referencing improves the signal-to-noise ratio, but that noisy channels can contaminate the results. We also show that identification of noisy channels depends on the reference and examine the complex interaction of filtering, noisy channel identification, and referencing. We introduce a multi-stage robust referencing scheme to deal with the noisy channel-reference interaction. We propose a standardized early-stage EEG processing pipeline (PREP) and discuss the application of the pipeline to more than 600 EEG datasets. The pipeline includes an automatically generated report for each dataset processed. Users can download the PREP pipeline as a freely available MATLAB library from http://eegstudy.org/prepcode. PMID:26150785

[Combined application of multiple fluorescence in research on the degradation of fluoranthene by potassium ferrate].

PubMed

Li, Si; Yu, Dan-Ni; Ji, Fang-Ying; Zhou, Guang-Ming; He, Qiang

2012-11-01

The degradation of fluoranthene was researched by combined means of multiple fluorescence spectra, including emission, synchronous, excitation emission matrix (EEM), time-scan and photometry. The characteristics of the degradation and fluoranthene molecular changes within the degradation's process were also discussed according to the information about the degradation provided by all of the fluorescence spectra mentioned above. The equations of fluoranthene's degradation by potassium ferrate were obtained on the bases of fitting time-scan fluorescence curves at different time, and the degradation's kinetic was speculated accordingly. From the experimental results, multiple fluorescence data commonly reflected that it had same degradation rate at the same reaction time. t = 10 s, and the degradation rate is -55%, t = 25 s, -81%, t = 40 s, -91%. No new fluorescent characteristic was observed within every degradation' stage. The reaction stage during t < or = 20 s was crucial, in which the degradation process is closest to linear relationship. After this beginning stage, the linear relationship deviated gradually with the development of the degradation process. The degradation of fluoranthene by potassium ferrate was nearly in accord with the order of the first order reaction.

Proteomics Identification of Potential Candidates Involved in Cell Proliferation for Early Stage of Brain Regeneration in the Adult Zebrafish.

PubMed

Lim, Fei Tieng; Ogawa, Satoshi; Smith, A Ian; Parhar, Ishwar S

2017-02-01

The central nervous system (CNS) of the non-mammalian vertebrates has better neuroregenerative capability as compared with the mammalian CNS. Regeneration of habenula was observed 40 days after damage in zebrafish. During the early stage of regeneration, we found a significant increase of apoptotic cells on day-1 post-damage and of proliferative cells on day-3 post-damage. To identify the molecular factor(s) involved in the early stages of neuroregeneration, differentially expressed proteins during sham, 20- and 40-h post-habenula damage were investigated by proteomic approach by using two-dimensional differential gel electrophoresis (2D-DIGE) coupled with Matrix-Assisted Laser Desorption/Ionization-Time-of-Flight (MALDI-ToF) and tandem mass spectrometry. Protein profiles revealed 17 differentially (>1.5-fold) expressed proteins: 10 upregulated, 4 downregulated, 2 proteins were found to be downregulated at the early stage but upregulated at a later stage, and 1 protein was found to be upregulated at 2 different time points. All proteins identified can be summarized under few molecular processes involved in the early stages of neuroregeneration in zebrafish CNS: apoptosis regulation (Wnt inhibitory factor 1 [WIF1]), neuroprotection (metallothionein), cell proliferation (Spred2, ependymin, Lhx1, and Wnts), differentiation (Spred2, Lhx9, and Wnts), and morphogenesis (cytoplasmic actins and draculin). These protein profiling results suggest that drastic molecular changes occur in the neuroregenerative process during this period, which includes cell proliferation, differentiation, and protection.

Two stage heterotrophy/photoinduction culture of Scenedesmus incrassatulus: potential for lutein production.

PubMed

Flórez-Miranda, Liliana; Cañizares-Villanueva, Rosa Olivia; Melchy-Antonio, Orlando; Martínez-Jerónimo, Fernando; Flores-Ortíz, Cesar Mateo

2017-11-20

A biomass production process including two stages, heterotrophy/photoinduction (TSHP), was developed to improve biomass and lutein production by the green microalgae Scenedesmus incrassatulus. To determine the effects of different nitrogen sources (yeast extract and urea) and temperature in the heterotrophic stage, experiments using shake flask cultures with glucose as the carbon source were carried out. The highest biomass productivity and specific pigment concentrations were reached using urea+vitamins (U+V) at 30°C. The first stage of the TSHP process was done in a 6L bioreactor, and the inductions in a 3L airlift photobioreactor. At the end of the heterotrophic stage, S. incrassatulus achieved the maximal biomass concentration, increasing from 7.22gL -1 to 17.98gL -1 with an increase in initial glucose concentration from 10.6gL -1 to 30.3gL -1 . However, the higher initial glucose concentration resulted in a lower specific growth rate (μ) and lower cell yield (Y x/s ), possibly due to substrate inhibition. After 24h of photoinduction, lutein content in S. incrassatulus biomass was 7 times higher than that obtained at the end of heterotrophic cultivation, and the lutein productivity was 1.6 times higher compared with autotrophic culture of this microalga. Hence, the two-stage heterotrophy/photoinduction culture is an effective strategy for high cell density and lutein production in S. incrassatulus. Copyright © 2017. Published by Elsevier B.V.

Waste management of printed wiring boards: a life cycle assessment of the metals recycling chain from liberation through refining.

PubMed

Xue, Mianqiang; Kendall, Alissa; Xu, Zhenming; Schoenung, Julie M

2015-01-20

Due to economic and societal reasons, informal activities including open burning, backyard recycling, and landfill are still the prevailing methods used for electronic waste treatment in developing countries. Great efforts have been made, especially in China, to promote formal approaches for electronic waste management by enacting laws, developing green recycling technologies, initiating pilot programs, etc. The formal recycling process can, however, engender environmental impact and resource consumption, although information on the environmental loads and resource consumption is currently limited. To quantitatively assess the environmental impact of the processes in a formal printed wiring board (PWB) recycling chain, life cycle assessment (LCA) was applied to a formal recycling chain that includes the steps from waste liberation through materials refining. The metal leaching in the refining stage was identified as a critical process, posing most of the environmental impact in the recycling chain. Global warming potential was the most significant environmental impact category after normalization and weighting, followed by fossil abiotic depletion potential, and marine aquatic eco-toxicity potential. Scenario modeling results showed that variations in the power source and chemical reagents consumption had the greatest influence on the environmental performance. The environmental impact from transportation used for PWB collection was also evaluated. The results were further compared to conventional primary metals production processes, highlighting the environmental benefit of metal recycling from waste PWBs. Optimizing the collection mode, increasing the precious metals recovery efficiency in the beneficiation stage and decreasing the chemical reagents consumption in the refining stage by effective materials liberation and separation are proposed as potential improvement strategies to make the recycling chain more environmentally friendly. The LCA results provide environmental information for the improvement of future integrated technologies and electronic waste management.

Preparation of Term Papers Based upon a Research-Process Model.

ERIC Educational Resources Information Center

Feldmann, Rodney Mansfield; Schloman, Barbara Frick

1990-01-01

Described is an alternative method of term paper preparation which provides a step-by-step sequence of assignments and provides feedback to the students at all stages in the preparation of the report. An example of this model is provided including 13 sequential assignments. (CW)

A Primer on Adventure Education in the Camp Setting.

ERIC Educational Resources Information Center

Nei, Eric

2003-01-01

Basic concepts of experiential learning theory are presented to assist camp directors in choosing knowledgeable staff and developing successful adventure programs. These concepts include assessment of learner (camper) readiness, activity sequencing, learning cycle, comfort zone, activity framing, task goals versus process goals, and five stages of…

Matching Expectations for Successful University Student Volunteering

ERIC Educational Resources Information Center

Paull, Megan; Omari, Maryam; MacCallum, Judith; Young, Susan; Walker, Gabrielle; Holmes, Kirsten; Haski-Leventha, Debbie; Scott, Rowena

2017-01-01

Purpose: The purpose of this paper is to demonstrate the importance of expectation formation and matching for university student volunteers and their hosts. Design/methodology/approach: This research involved a multi-stage data collection process including interviews with student volunteers, and university and host representatives from six…

The Role of e-Portfolios in Supporting Productive Learning

ERIC Educational Resources Information Center

Yang, Min; Tai, Mui; Lim, Cher Ping

2016-01-01

e-Portfolios are a form of authentic assessment with formative functions that include showcasing and sharing learning artifacts, documenting reflective learning processes, connecting learning across various stages and enabling frequent feedback for improvements. This paper examines how e-portfolios take up these formative roles to support…

7 CFR 319.59-1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... processing. Hay. Host crops cut and dried for feeding to livestock. Hay cut after reaching the dough stage may contain mature kernels of the host crop. Host crops. Plants or plant parts, including grain, seed..., and a seed. Seed. Wheat (Triticum aestivum), durum wheat (Triticum durum), and triticale (Triticum...

Career Education Programs That Work.

ERIC Educational Resources Information Center

Interinstitutional Consortium for Career Education, Salem, OR.

This handbook contains thirty abstracts of career education programs that summarize techniques, processes, activities, and materials that have been used by students and teachers. The handbook, which was designed for use after the planning stages, includes items for kindergarten through grade twelve that can be related to various subject matter…

Supporting Language Arts Innovations That Endure (Reading Leadership).

ERIC Educational Resources Information Center

Sanacore, Joseph

1996-01-01

Discusses how language arts educators can promote enduring change, including the need for continuous cooperation, collaboration, and reflection; the active involvement of all the stakeholders during every stage of nurturing visions; and how to support this complex growth process with flexibility and with an enduring commitment. (SR)

The Odd Fish Story

ERIC Educational Resources Information Center

Essley, Roger

2005-01-01

Essley was a "different learner," and now he works in schools showing teachers how visual/verbal tools can help all students, including their "different learners," succeed. One valuable tool is storyboarding, a process by which students build a story through visual stages--drafts, conferences, revisions--before writing even begins. Essley shares…

The role of bank collapse on tidal creek ontogeny: A novel process-based model for bank retreat

NASA Astrophysics Data System (ADS)

Gong, Zheng; Zhao, Kun; Zhang, Changkuan; Dai, Weiqi; Coco, Giovanni; Zhou, Zeng

2018-06-01

Bank retreat in coastal tidal flats plays a primary role on the planimetric shape of tidal creeks and is commonly driven by both flow-induced bank erosion and gravity-induced bank collapse. However, existing modelling studies largely focus on bank erosion and overlook bank collapse. We build a bank retreat model coupling hydrodynamics, bank erosion and bank collapse. To simulate the process of bank collapse, a stress-deformation model is utilized to calculate the stress variation of bank soil after bank erosion, and the Mohr-Coulomb failure criterion is then applied to evaluate the stability of the tidal creek bank. Results show that the bank failure process can be categorized into three stages, i.e., shear failure at the bank toe (stage I), tensile failure on the bank top (stage II), and sectional cracking from the bank top to the toe (stage III). With only bank erosion, the planimetric shapes of tidal creeks are funneled due to the gradually seaward increasing discharge. In contrast to bank erosion, bank collapse is discontinuous, and the contribution of bank collapse to bank retreat can reach 85%, highlighting that the expansion of tidal creeks can be dominated by bank collapse process. The planimetric shapes of tidal creeks are funneled with a much faster expansion rate when bank collapse is considered. Overall, this study makes a further step toward more physical and realistic simulation of bank retreat in estuarine and coastal settings and the developed bank collapse module can be readily included in other morphodynamic models.

Improving the performance of enzymes in hydrolysis of high solids paper pulp derived from MSW.

PubMed

Puri, Dhivya J; Heaven, Sonia; Banks, Charles J

2013-01-01

The research aimed to improve the overall conversion efficiency of the CTec® family of enzymes by identifying factors that lead to inhibition and seeking methods to overcome these through process modification and manipulation. The starting material was pulp derived from municipal solid waste and processed in an industrial-scale washing plant. Analysis of the pulp by acid hydrolysis showed a ratio of 55 : 12 : 6 : 24 : 3 of glucan : xylan : araban/galactan/mannan : lignin : ash. At high total solids content (>18.5% TS) single-stage enzyme hydrolysis gave a maximum glucan conversion of 68%. It was found that two-stage hydrolysis could give higher conversion if sugar inhibition was removed by an intermediate fermentation step between hydrolysis stages. This, however, was not as effective as direct removal of the sugar products, including xylose, by washing of the residual pulp at pH 5. This improved the water availability and allowed reactivation of the pulp-bound enzymes. Inhibition of enzyme activity could further be alleviated by replenishment of β-glucosidase which was shown to be removed during the wash step. The two-stage hydrolysis process developed could give an overall glucan conversion of 88%, with an average glucose concentration close to 8% in 4 days, thus providing an ideal starting point for ethanol fermentation with a likely yield of 4 wt%. This is a significant improvement over a single-step process. This hydrolysis configuration also provides the potential to recover the sugars associated with residual solids which are diluted when washing hydrolysed pulp.

Oxidizing Roasting Performances of Coke Fines Bearing Brazilian Specularite Pellets

NASA Astrophysics Data System (ADS)

Chun, Tiejun; Zhu, Deqing

2016-06-01

Oxidized pellets, consisting of Brazilian specularite fines and coke fines, were prepared by disc pelletizer using bentonite as binder. The roasting process of pellets includes preheating stage and firing stage. The compressive strength of preheated pellets and fired pellets reached the peak value at 1.5% coke fines dosage. During the initial stage of preheating, some original Fe2O3 was reduced to Fe3O4 because of partial reduction atmosphere in pellet. During the later stage of preheating and firing stage, coke fines were burnt out, and the secondary Fe2O3 (new generation Fe2O3) was generated due to the re-oxidization of Fe3O4, which improved the recrystallization of Fe2O3. Compared with the fired pellets without adding coke fines, fired pellets with 1.5% coke fines exhibited the comparable RSI (reduction swelling index) and RDI+3.15 mm (reduction degradation index), and slightly lower RI (reducibility index).

The stages of the international drug control system.

PubMed

Carstairs, Catherine

2005-01-01

This paper argues that the history of the international drug control system of the League of Nations/United Nations can be divided into three cumulative stages. The first stage, the supply stage, dates back to early part of the 20th century, and aimed to reduce the supply of drugs through careful monitoring and trade regulations. This has remained the dominant control strategy. In the middle of the century, demand control, in the form of treatment and criminalization of the individual user, began to appear. This was the least successful stage. Finally, in the 1980s, the dangers of the drug traffic assumed an important place on the international agenda and measures to reduce drug-related organized crime were enacted. To date, this has been a process of proliferation of regulatory strategies. Recently, new challenges to the international drug control system have emerged, including well-funded non-governmental organizations critical of the war on drugs, and the adoption of harm reduction measures in national policies around the world.

Design and Control of a Micro/Nano Load Stage for In-Situ AFM Observation and Nanoscale Structural and Mechanical Characterization of MWCNT-Epoxy Composites

NASA Astrophysics Data System (ADS)

Leininger, Wyatt Christopher

Nanomaterial composites hold improvement potential for many materials. Improvements arise through known material behaviors and unique nanoscale effects to improve performance in areas including elastic modulus and damping as well as various processes, and products. Review of research spurred development of a load-stage. The load stage could be used independently, or in conjunction with an AFM to investigate bulk and nanoscale material mechanics. The effect of MWCNT content on structural damping, elastic modulus, toughness, loss modulus, and glass transition temperature was investigated using the load stage, AMF, and DMA. Initial investigation showed elastic modulus increased 23% with 1wt.% MWCNT versus pure epoxy and in-situ imaging observed micro/nanoscale deformation. Dynamic capabilities of the load stage were investigated as a method to achieve higher stress than available through DMA. The system showed energy dissipation across all reinforce levels, with 480% peak for the 1wt.% MWCNT material vs. the neat epoxy at 1Hz.

Exploration of mineral resource deposits based on analysis of aerial and satellite image data employing artificial intelligence methods

NASA Astrophysics Data System (ADS)

Osipov, Gennady

2013-04-01

We propose a solution to the problem of exploration of various mineral resource deposits, determination of their forms / classification of types (oil, gas, minerals, gold, etc.) with the help of satellite photography of the region of interest. Images received from satellite are processed and analyzed to reveal the presence of specific signs of deposits of various minerals. Course of data processing and making forecast can be divided into some stages: Pre-processing of images. Normalization of color and luminosity characteristics, determination of the necessary contrast level and integration of a great number of separate photos into a single map of the region are performed. Construction of semantic map image. Recognition of bitmapped image and allocation of objects and primitives known to system are realized. Intelligent analysis. At this stage acquired information is analyzed with the help of a knowledge base, which contain so-called "attention landscapes" of experts. Used methods of recognition and identification of images: a) combined method of image recognition, b)semantic analysis of posterized images, c) reconstruction of three-dimensional objects from bitmapped images, d)cognitive technology of processing and interpretation of images. This stage is fundamentally new and it distinguishes suggested technology from all others. Automatic registration of allocation of experts` attention - registration of so-called "attention landscape" of experts - is the base of the technology. Landscapes of attention are, essentially, highly effective filters that cut off unnecessary information and emphasize exactly the factors used by an expert for making a decision. The technology based on denoted principles involves the next stages, which are implemented in corresponding program agents. Training mode -> Creation of base of ophthalmologic images (OI) -> Processing and making generalized OI (GOI) -> Mode of recognition and interpretation of unknown images. Training mode includes noncontact registration of eye motion, reconstruction of "attention landscape" fixed by the expert, recording the comments of the expert who is a specialist in the field of images` interpretation, and transfer this information into knowledge base.Creation of base of ophthalmologic images (OI) includes making semantic contacts from great number of OI based on analysis of OI and expert's comments.Processing of OI and making generalized OI (GOI) is realized by inductive logic algorithms and consists in synthesis of structural invariants of OI. The mode of recognition and interpretation of unknown images consists of several stages, which include: comparison of unknown image with the base of structural invariants of OI; revealing of structural invariants in unknown images; ynthesis of interpretive message of the structural invariants base and OI base (the experts` comments stored in it). We want to emphasize that the training mode does not assume special involvement of experts to teach the system - it is realized in the process of regular experts` work on image interpretation and it becomes possible after installation of a special apparatus for non contact registration of experts` attention. Consequently, the technology, which principles is described there, provides fundamentally new effective solution to the problem of exploration of mineral resource deposits based on computer analysis of aerial and satellite image data.

Method and apparatus for removing coarse unentrained char particles from the second stage of a two-stage coal gasifier

DOEpatents

Donath, Ernest E.

1976-01-01

A method and apparatus for removing oversized, unentrained char particles from a two-stage coal gasification process so as to prevent clogging or plugging of the communicating passage between the two gasification stages. In the first stage of the process, recycled process char passes upwardly while reacting with steam and oxygen to yield a first stage synthesis gas containing hydrogen and oxides of carbon. In the second stage, the synthesis gas passes upwardly with coal and steam which react to yield partially gasified char entrained in a second stage product gas containing methane, hydrogen, and oxides of carbon. Agglomerated char particles, which result from caking coal particles in the second stage and are too heavy to be entrained in the second stage product gas, are removed through an outlet in the bottom of the second stage, the particles being separated from smaller char particles by a counter-current of steam injected into the outlet.

Cruise Stage of NASA's InSight Spacecraft

NASA Image and Video Library

2017-08-28

Lockheed Martin spacecraft specialists check the cruise stage of NASA's InSight spacecraft in this photo taken June 22, 2017, in a Lockheed Martin clean room facility in Littleton, Colorado. The cruise stage will provide vital functions during the flight from Earth to Mars, and then will be jettisoned before the InSight lander, enclosed in its aeroshell, enters Mars' atmosphere. The InSight mission (for Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) is scheduled to launch in May 2018 and land on Mars Nov. 26, 2018. It will investigate processes that formed and shaped Mars and will help scientists better understand the evolution of our inner solar system's rocky planets, including Earth. https://photojournal.jpl.nasa.gov/catalog/PIA21845

[Staged oncological screening with TG test].

PubMed

Bakhlaev, I E; Ageenko, A I; Rolik, I S

2006-01-01

The authors present their analysis of screening methods used for early diagnostics of cancer of various localization and for detection of high-risk individuals. They offer a program of step-by-step screening that makes it possible to cover more population with prophylactic examination and to reduce the need for special examination methods. TG-test is a universal and the most informative blastomatous process indicator at any stage, including the preclinical one. The practical screening results double the revealing rate of oncopathology and allow for three-fold reduction in the diagnostic costs compared with standard methods of cancer diagnostics. The medical efficiency of the oncological screening is high; in one third of the examined patients a tumor is diagnosed at the preclinical stage.

The Diverse Roles of Hydrogel Mechanics in Injectable Stem Cell Transplantation.

PubMed

Foster, Abbygail A; Marquardt, Laura M; Heilshorn, Sarah C

2017-02-01

Stem cell delivery by local injection has tremendous potential as a regenerative therapy but has seen limited clinical success. Several mechanical challenges hinder therapeutic efficacy throughout all stages of cell transplantation, including mechanical forces during injection and loss of mechanical support post-injection. Recent studies have begun exploring the use of biomaterials, in particular hydrogels, to enhance stem cell transplantation by addressing the often-conflicting mechanical requirements associated with each stage of the transplantation process. This review explores recent biomaterial approaches to improve the therapeutic efficacy of stem cells delivered through local injection, with a focus on strategies that specifically address the mechanical challenges that result in cell death and/or limit therapeutic function throughout the stages of transplantation.

Comparative assessment of single-stage and two-stage anaerobic digestion for the treatment of thin stillage.

PubMed

Nasr, Noha; Elbeshbishy, Elsayed; Hafez, Hisham; Nakhla, George; El Naggar, M Hesham

2012-05-01

A comparative evaluation of single-stage and two-stage anaerobic digestion processes for biomethane and biohydrogen production using thin stillage was performed to assess the impact of separating the acidogenic and methanogenic stages on anaerobic digestion. Thin stillage, the main by-product from ethanol production, was characterized by high total chemical oxygen demand (TCOD) of 122 g/L and total volatile fatty acids (TVFAs) of 12 g/L. A maximum methane yield of 0.33 L CH(4)/gCOD(added) (STP) was achieved in the two-stage process while a single-stage process achieved a maximum yield of only 0.26 L CH(4)/gCOD(added) (STP). The separation of acidification stage increased the TVFAs to TCOD ratio from 10% in the raw thin stillage to 54% due to the conversion of carbohydrates into hydrogen and VFAs. Comparison of the two processes based on energy outcome revealed that an increase of 18.5% in the total energy yield was achieved using two-stage anaerobic digestion. Copyright © 2012 Elsevier Ltd. All rights reserved.

[The EMECAM protocol: an analysis of the short-term effect of air pollution on mortality. Estudio Multicéntrico Español sobre la Relación entre la Contaminación Atmosférica u la Mortalidad].

PubMed

Pérez-Hoyos, S; Sáez Zafra, M; Barceló, M A; Cambra, C; Figueiras Guzmán, A; Ordóñez, J M; Guillén Grima, F; Ocaña, R; Bellido, J; Cirera Suárez, L; López, A A; Rodríguez, V; Alcalá Nalvaiz, T; Ballester Díez, F

1999-01-01

The aim of this study is to Mortality show the protocol of analysis which was set out as part of the EMECAM Project, illustrating the application thereof to the effect of pollution has on the mortality in the city of Valencia. The response variables considered will be the daily deaths rate resulting from all causes, except external ones. The explicative variables are the daily series of different pollutants (black smoke, SO2, NO2, CO, O3). As possible confusion variables, weather factors, structural factors and weekly cases of flu are taken into account. A Poisson regression model is built up for each one of the four deaths series in two stages. In the first stage, a baseline model is fitted using the possible confusion variables. In the second stage, the pollution variables or the time legs thereof are included, controlling the residual autocorrelation by including mortality time lags. The process of fitting the baseline model is as follows: 1) Include the significant sinusoidal terms up to the sixth order. 2) Include the significant temperature or temperature squared terms with the time lags thereof up to the 7th order. 3) Repeat this process with the relative humidity. 4) Add in the significant terms of calendar years, daily tendency and tendency squared. 5) The days of the week as dummy variables are always included in the model. 6) Include the holidays and the significant time lags of up to two weeks of flu. Following the reassessment of the model, each one of the pollutants and the time lags thereof up to the fifth order are proven out. The impact is analyzed by six-month periods, including interaction terms.

Stages of Behavioral Change for Reducing Sodium Intake in Korean Consumers: Comparison of Characteristics Based on Social Cognitive Theory

PubMed Central

Ahn, So-hyun; Kwon, Jong Sook; Kim, Kyungmin; Kim, Hye-Kyeong

2017-01-01

High sodium intake increases the risk of cardiovascular disease. Given the importance of behavioral changes to reducing sodium intake, this study aims to investigate the stages of change and the differences in cognitive and behavioral characteristics by stage in Korean consumers. Adult participants (N = 3892) completed a questionnaire on the stages of behavioral change, recognition of social efforts, outcome expectancy, barriers to practice, nutrition knowledge and dietary behaviors, and self-efficiency related to reduced sodium intake. The numbers of participants in each stage of behavioral change for reducing sodium intake was 29.5% in the maintenance stage, 19.5% in the action stage, and 51.0% in the preaction stage that included the precontemplation, contemplation, and preparation stages. Multiple logistic regression showed that the factors differentiating the three stages were recognizing a supportive social environment, perceived barriers to the practice of reducing sodium intake, and self-efficacy to be conscious of sodium content and to request less salt when eating out. Purchasing experience of sodium-reduced products for salty foods, knowledge of the recommended intake of salt and the difference between sodium and salt, and improving dietary habits of eating salted fish, processed food, and salty snacks were factors for being in the action stage versus the preaction stage. These findings suggest that tailored intervention according to the characteristics of each stage is helpful in reducing sodium intake. PMID:28749441

Photons from the early stages of relativistic heavy-ion collisions

NASA Astrophysics Data System (ADS)

Oliva, L.; Ruggieri, M.; Plumari, S.; Scardina, F.; Peng, G. X.; Greco, V.

2017-07-01

We present results about photon-production in relativistic heavy-ion collisions. The main novelty of our study is the calculation of the contribution of the early-stage photons to the photon spectrum. The initial stage is modeled by an ensemble of classical gluon fields which decay to a quark-gluon plasma via the Schwinger mechanism, and the evolution of the system is studied by coupling classical field equations to relativistic kinetic theory; photon production is then computed by including the pertinent collision processes into the collision integral. We find that the contribution of the early-stage photons to the direct photon spectrum is substantial for pT≈2 GeV and higher, the exact value depending on the collision energy; therefore, we identify this part of the photon spectrum as the sign of the early stage. Moreover, the amount of photons produced during the early stage is not negligible with respect to those produced by a thermalized quark-gluon plasma: We support the idea that there is no dark age in relativistic heavy-ion collisions.

Parametric Design within an Atomic Design Process (ADP) applied to Spacecraft Design

NASA Astrophysics Data System (ADS)

Ramos Alarcon, Rafael

This thesis describes research investigating the development of a model for the initial design of complex systems, with application to spacecraft design. The design model is called an atomic design process (ADP) and contains four fundamental stages (specifications, configurations, trade studies and drivers) that constitute the minimum steps of an iterative process that helps designers find a feasible solution. Representative design models from the aerospace industry are reviewed and are compared with the proposed model. The design model's relevance, adaptability and scalability features are evaluated through a focused design task exercise with two undergraduate teams and a long-term design exercise performed by a spacecraft payload team. The implementation of the design model is explained in the context in which the model has been researched. This context includes the organization (a student-run research laboratory at the University of Michigan), its culture (academically oriented), members that have used the design model and the description of the information technology elements meant to provide support while using the model. This support includes a custom-built information management system that consolidates relevant information that is currently being used in the organization. The information is divided in three domains: personnel development history, technical knowledge base and laboratory operations. The focused study with teams making use of the design model to complete an engineering design exercise consists of the conceptual design of an autonomous system, including a carrier and a deployable lander that form the payload of a rocket with an altitude range of over 1000 meters. Detailed results from each of the stages of the design process while implementing the model are presented, and an increase in awareness of good design practices in the teams while using the model are explained. A long-term investigation using the design model consisting of the successful characterization of an imaging system for a spacecraft is presented. The spacecraft is designed to take digital color images from low Earth orbit. The dominant drivers from each stage of the design process are indicated as they were identified, with the accompanying hardware development leading to the final configuration that comprises the flight spacecraft.

Multispectral simulation environment for modeling low-light-level sensor systems

NASA Astrophysics Data System (ADS)

Ientilucci, Emmett J.; Brown, Scott D.; Schott, John R.; Raqueno, Rolando V.

1998-11-01

Image intensifying cameras have been found to be extremely useful in low-light-level (LLL) scenarios including military night vision and civilian rescue operations. These sensors utilize the available visible region photons and an amplification process to produce high contrast imagery. It has been demonstrated that processing techniques can further enhance the quality of this imagery. For example, fusion with matching thermal IR imagery can improve image content when very little visible region contrast is available. To aid in the improvement of current algorithms and the development of new ones, a high fidelity simulation environment capable of producing radiometrically correct multi-band imagery for low- light-level conditions is desired. This paper describes a modeling environment attempting to meet these criteria by addressing the task as two individual components: (1) prediction of a low-light-level radiance field from an arbitrary scene, and (2) simulation of the output from a low- light-level sensor for a given radiance field. The radiance prediction engine utilized in this environment is the Digital Imaging and Remote Sensing Image Generation (DIRSIG) model which is a first principles based multi-spectral synthetic image generation model capable of producing an arbitrary number of bands in the 0.28 to 20 micrometer region. The DIRSIG model is utilized to produce high spatial and spectral resolution radiance field images. These images are then processed by a user configurable multi-stage low-light-level sensor model that applies the appropriate noise and modulation transfer function (MTF) at each stage in the image processing chain. This includes the ability to reproduce common intensifying sensor artifacts such as saturation and 'blooming.' Additionally, co-registered imagery in other spectral bands may be simultaneously generated for testing fusion and exploitation algorithms. This paper discusses specific aspects of the DIRSIG radiance prediction for low- light-level conditions including the incorporation of natural and man-made sources which emphasizes the importance of accurate BRDF. A description of the implementation of each stage in the image processing and capture chain for the LLL model is also presented. Finally, simulated images are presented and qualitatively compared to lab acquired imagery from a commercial system.

Study of gas production from shale reservoirs with multi-stage hydraulic fracturing horizontal well considering multiple transport mechanisms.

PubMed

Guo, Chaohua; Wei, Mingzhen; Liu, Hong

2018-01-01

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no systematical work has been conducted considering all reasonable transport mechanisms. And there are very few works on sensitivity studies of uncertain parameters using real parameter ranges. Hence, a detailed and systematic study of reservoir simulation with MsFHW is still necessary. In this paper, a dual porosity model was constructed to estimate the effect of parameters on shale gas production with MsFHW. The simulation model was verified with the available field data from the Barnett Shale. The following mechanisms have been considered in this model: viscous flow, slip flow, Knudsen diffusion, and gas desorption. Langmuir isotherm was used to simulate the gas desorption process. Sensitivity analysis on SGRs' production performance with MsFHW has been conducted. Parameters influencing shale gas production were classified into two categories: reservoir parameters including matrix permeability, matrix porosity; and hydraulic fracture parameters including hydraulic fracture spacing, and fracture half-length. Typical ranges of matrix parameters have been reviewed. Sensitivity analysis have been conducted to analyze the effect of the above factors on the production performance of SGRs. Through comparison, it can be found that hydraulic fracture parameters are more sensitive compared with reservoir parameters. And reservoirs parameters mainly affect the later production period. However, the hydraulic fracture parameters have a significant effect on gas production from the early period. The results of this study can be used to improve the efficiency of history matching process. Also, it can contribute to the design and optimization of hydraulic fracture treatment design in unconventional SGRs.

Study of gas production from shale reservoirs with multi-stage hydraulic fracturing horizontal well considering multiple transport mechanisms

PubMed Central

Wei, Mingzhen; Liu, Hong

2018-01-01

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no systematical work has been conducted considering all reasonable transport mechanisms. And there are very few works on sensitivity studies of uncertain parameters using real parameter ranges. Hence, a detailed and systematic study of reservoir simulation with MsFHW is still necessary. In this paper, a dual porosity model was constructed to estimate the effect of parameters on shale gas production with MsFHW. The simulation model was verified with the available field data from the Barnett Shale. The following mechanisms have been considered in this model: viscous flow, slip flow, Knudsen diffusion, and gas desorption. Langmuir isotherm was used to simulate the gas desorption process. Sensitivity analysis on SGRs’ production performance with MsFHW has been conducted. Parameters influencing shale gas production were classified into two categories: reservoir parameters including matrix permeability, matrix porosity; and hydraulic fracture parameters including hydraulic fracture spacing, and fracture half-length. Typical ranges of matrix parameters have been reviewed. Sensitivity analysis have been conducted to analyze the effect of the above factors on the production performance of SGRs. Through comparison, it can be found that hydraulic fracture parameters are more sensitive compared with reservoir parameters. And reservoirs parameters mainly affect the later production period. However, the hydraulic fracture parameters have a significant effect on gas production from the early period. The results of this study can be used to improve the efficiency of history matching process. Also, it can contribute to the design and optimization of hydraulic fracture treatment design in unconventional SGRs. PMID:29320489

Evaluation on levels and conversion profiles of DON, 3-ADON, and 15-ADON during bread making process.

PubMed

Wu, Li; Wang, Bujun

2015-10-15

The present study investigated the changes and conversion profiles of DON, its conjugations 3-ADON, and 15-ADON during bread making process, by spiking targeted mycotoxin standards to Fusarium mycotoxins-free wheat flour. No significant (p < 0.05) changes of DON levels were observed during dough preparation stages, including kneading, fermentation, and proofing. A reduction of DON level ranged from 4% to 14% was observed during baking process. The main thermal degradation products of DON, namely norDON A, B, C, and F were detected in the bread crust. Regarding ADONs, decreases of 20-40% for 3-ADON and 28-60% for 15-ADON were found during fermentation stage, and further losses of ADONs were observed after proofing process. Although ADONs levels gained an increase after baking. This study demonstrated that ADONs were converted to DON, while no ADONs were detectable in DON spiked samples during bread making process. The mechanism that ADONs could be converted into DON is unclear so far. Copyright © 2015. Published by Elsevier Ltd.

An empirical analysis of strategy implementation process and performance of construction companies

NASA Astrophysics Data System (ADS)

Zaidi, F. I.; Zawawi, E. M. A.; Nordin, R. M.; Ahnuar, E. M.

2018-02-01

Strategy implementation is known as action stage where it is to be considered as the most difficult stage in strategic planning. Strategy implementation can influence the whole texture of a company including its performance. The aim of this research is to provide the empirical relationship between strategy implementation process and performance of construction companies. This research establishes the strategy implementation process and how it influences the performance of construction companies. This research used quantitative method approached via questionnaire survey. Respondents were G7 construction companies in Klang Valley, Selangor. Pearson correlation analysis indicate a strong positive relationship between strategy implementation process and construction companies’ performance. The most importance part of strategy implementation process is to provide sufficient training for employees which directly influence the construction companies’ profit growth and employees’ growth. This research results will benefit top management in the construction companies to conduct strategy implementation in their companies. This research may not reflect the whole construction industry in Malaysia. Future research may be resumed to small and medium grades contractors and perhaps in other areas in Malaysia.

Information in general medical practices: the information processing model.

PubMed

Crowe, Sarah; Tully, Mary P; Cantrill, Judith A

2010-04-01

The need for effective communication and handling of secondary care information in general practices is paramount. To explore practice processes on receiving secondary care correspondence in a way that integrates the information needs and perceptions of practice staff both clinical and administrative. Qualitative study using semi-structured interviews with a wide range of practice staff (n = 36) in nine practices in the Northwest of England. Analysis was based on the framework approach using N-Vivo software and involved transcription, familiarization, coding, charting, mapping and interpretation. The 'information processing model' was developed to describe the six stages involved in practice processing of secondary care information. These included the amendment or updating of practice records whilst simultaneously or separately actioning secondary care recommendations, using either a 'one-step' or 'two-step' approach, respectively. Many factors were found to influence each stage and impact on the continuum of patient care. The primary purpose of processing secondary care information is to support patient care; this study raises the profile of information flow and usage within practices as an issue requiring further consideration.

Vernier But Not Grating Acuity Contributes to an Early Stage of Visual Word Processing.

PubMed

Tan, Yufei; Tong, Xiuhong; Chen, Wei; Weng, Xuchu; He, Sheng; Zhao, Jing

2018-03-28

The process of reading words depends heavily on efficient visual skills, including analyzing and decomposing basic visual features. Surprisingly, previous reading-related studies have almost exclusively focused on gross aspects of visual skills, while only very few have investigated the role of finer skills. The present study filled this gap and examined the relations of two finer visual skills measured by grating acuity (the ability to resolve periodic luminance variations across space) and Vernier acuity (the ability to detect/discriminate relative locations of features) to Chinese character-processing as measured by character form-matching and lexical decision tasks in skilled adult readers. The results showed that Vernier acuity was significantly correlated with performance in character form-matching but not visual symbol form-matching, while no correlation was found between grating acuity and character processing. Interestingly, we found no correlation of the two visual skills with lexical decision performance. These findings provide for the first time empirical evidence that the finer visual skills, particularly as reflected in Vernier acuity, may directly contribute to an early stage of hierarchical word processing.

Quantitative Proteomics Analysis of Streptomyces coelicolor Development Demonstrates That Onset of Secondary Metabolism Coincides with Hypha Differentiation*

PubMed Central

Manteca, Angel; Sanchez, Jesus; Jung, Hye R.; Schwämmle, Veit; Jensen, Ole N.

2010-01-01

Streptomyces species produce many clinically important secondary metabolites, including antibiotics and antitumorals. They have a complex developmental cycle, including programmed cell death phenomena, that makes this bacterium a multicellular prokaryotic model. There are two differentiated mycelial stages: an early compartmentalized vegetative mycelium (first mycelium) and a multinucleated reproductive mycelium (second mycelium) arising after programmed cell death processes. In the present study, we made a detailed proteomics analysis of the distinct developmental stages of solid confluent Streptomyces coelicolor cultures using iTRAQ (isobaric tags for relative and absolute quantitation) labeling and LC-MS/MS. A new experimental approach was developed to obtain homogeneous samples at each developmental stage (temporal protein analysis) and also to obtain membrane and cytosolic protein fractions (spatial protein analysis). A total of 345 proteins were quantified in two biological replicates. Comparative bioinformatics analyses revealed the switch from primary to secondary metabolism between the initial compartmentalized mycelium and the multinucleated hyphae. PMID:20224110

Determination of the Pb, Cr, and Cd distribution patterns with various chlorine additives in the bottom ashes of a low-temperature two-stage fluidized bed incinerator by chemical sequential extraction.

PubMed

Peng, Tzu-Huan; Lin, Chiou-Liang; Wey, Ming-Yen

2015-09-15

A novel low-temperature two-stage fluidized bed (LTTSFB) incinerator has been successfully developed to control heavy-metal emissions during municipal solid waste (MSW) treatment. However, the characteristics of the residual metal patterns during this process are still unclear. The aim of this study was to investigate the metal patterns in the different partitions of the LTTSFB bottom ash by chemical sequential extraction. Artificial waste was used to simulate the MSW. Different parameters including the first-stage temperature, chloride additives, and operating gas velocity were also considered. Results indicated that during the low-temperature treatment process, a high metal mobility phase exists in the first-stage sand bed. The main patterns of Cd, Pb, and Cr observed were the water-soluble, exchangeable, and residual forms, respectively. With the different Cl additives, the results showed that polyvinyl chloride addition increased metal mobility in the LTTSFB bottom ash, while, sodium chloride addition may have reduced metal mobility due to the formation of eutectic material. The second-stage sand bed was found to have a lower risk of metal leaching. The results also suggested that, the residual ashes produced by the LTTSFB system must be taken into consideration given their high metal mobility. Copyright © 2015 Elsevier B.V. All rights reserved.

Bacterial community shift for monitoring the co-composting of oil palm empty fruit bunch and palm oil mill effluent anaerobic sludge.

PubMed

Zainudin, Mohd Huzairi Mohd; Ramli, Norhayati; Hassan, Mohd Ali; Shirai, Yoshihito; Tashiro, Kosuke; Sakai, Kenji; Tashiro, Yukihiro

2017-06-01

A recently developed rapid co-composting of oil palm empty fruit bunch (OPEFB) and palm oil mill effluent (POME) anaerobic sludge is beginning to attract attention from the palm oil industry in managing the disposal of these wastes. However, a deeper understanding of microbial diversity is required for the sustainable practice of the co-compositing process. In this study, an in-depth assessment of bacterial community succession at different stages of the pilot scale co-composting of OPEFB-POME anaerobic sludge was performed using 454-pyrosequencing, which was then correlated with the changes of physicochemical properties including temperature, oxygen level and moisture content. Approximately 58,122 of 16S rRNA gene amplicons with more than 500 operational taxonomy units (OTUs) were obtained. Alpha diversity and principal component analysis (PCoA) indicated that bacterial diversity and distributions were most influenced by the physicochemical properties of the co-composting stages, which showed remarkable shifts of dominant species throughout the process. Species related to Devosia yakushimensis and Desemzia incerta are shown to emerge as dominant bacteria in the thermophilic stage, while Planococcus rifietoensis correlated best with the later stage of co-composting. This study proved the bacterial community shifts in the co-composting stages corresponded with the changes of the physicochemical properties, and may, therefore, be useful in monitoring the progress of co-composting and compost maturity.

Processing of Swarm Accelerometer Data into Thermospheric Neutral Densities

NASA Astrophysics Data System (ADS)

Doornbos, E.; Siemes, C.; Encarnacao, J.; Peřestý, R.; Grunwaldt, L.; Kraus, J.; Holmdahl Olsen, P. E.; van den IJssel, J.; Flury, J.; Apelbaum, G.

2015-12-01

The Swarm satellites were launched on 22 November 2013 and carry accelerometers and GPS receivers as part of their scientific payload. The GPS receivers are not only used for locating the position and time of the magnetic measurements, but also for determining non-gravitational forces like drag and radiation pressure acting on the spacecraft. The accelerometers measure these forces directly, at much finer resolution than the GPS receivers, from which thermospheric neutral densities and potentially winds can be derived. Unfortunately, the acceleration measurements suffer from a variety of disturbances, the most prominent being slow temperature-induced bias variations and sudden bias changes. These disturbances have caused a significant delay of the accelerometer data release. In this presentation, we describe the new three-stage processing that is required for transforming the disturbed acceleration measurements into scientifically valuable thermospheric neutral densities. In the first stage, the sudden bias changes in the acceleration measurements are removed using a dedicated software tool. The second stage is the calibration of the accelerometer measurements against the non-gravitational accelerations derived from the GPS receiver, which includes the correction for the slow temperature-induced bias variations. The third stage consists of transforming the corrected and calibrated accelerations into thermospheric neutral densities. We describe the methods used in each stage, highlight the difficulties encountered, and comment on the quality of the thermospheric neutral density data set, which covers the geomagnetic storm on 17 March 2015.

Pulse-Flow Microencapsulation System

NASA Technical Reports Server (NTRS)

Morrison, Dennis R.

2006-01-01

The pulse-flow microencapsulation system (PFMS) is an automated system that continuously produces a stream of liquid-filled microcapsules for delivery of therapeutic agents to target tissues. Prior microencapsulation systems have relied on batch processes that involve transfer of batches between different apparatuses for different stages of production followed by sampling for acquisition of quality-control data, including measurements of size. In contrast, the PFMS is a single, microprocessor-controlled system that performs all processing steps, including acquisition of quality-control data. The quality-control data can be used as real-time feedback to ensure the production of large quantities of uniform microcapsules.

Analog signal pre-processing for the Fermilab Main Injector BPM upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saewert, A.L.; Rapisarda, S.M.; Wendt, M.

2006-05-01

An analog signal pre-processing scheme was developed, in the framework of the Fermilab Main Injector Beam Position Monitor (BPM) Upgrade, to interface BPM pickup signals to the new digital receiver based read-out system. A key component is the 8-channel electronics module, which uses separate frequency selective gain stages to acquire 53 MHz bunched proton, and 2.5 MHz anti-proton signals. Related hardware includes a filter and combiner box to sum pickup electrode signals in the tunnel. A controller module allows local/remote control of gain settings and activation of gain stages, and supplies test signals. Theory of operation, system overview, and somemore » design details are presented, as well as first beam measurements of the prototype hardware.« less

One-dimensional analysis of supersonic two-stage HVOF process

NASA Astrophysics Data System (ADS)

Katanoda, Hiroshi; Hagi, Junichi; Fukuhara, Minoru

2009-12-01

The one-dimensional calculation of the gas/particle flows of a supersonic two-stage high-velocity oxy-fuel (HVOF) thermal spray process was performed. The internal gas flow was solved by numerically integrating the equations of the quasi-one-dimensional flow including the effects of pipe friction and heat transfer. As for the supersonic jet flow, semi-empirical equations were used to obtain the gas velocity and temperature along the center line. The velocity and temperature of the particle were obtained by an one-way coupling method. The material of the spray particle selected in this study is ultra high molecular weight polyethylene (UHMWPE). The temperature distributions in the spherical UHMWPE particles of 50 and 150µm accelerated and heated by the supersonic gas flow was clarified.

Analyzing MER Uplink Reports

NASA Technical Reports Server (NTRS)

Savin, Stephen C.

2005-01-01

The MER project includes two rovers working simultaneously on opposite sides of Mars each receiving commands only once a day. Creating this uplink is critical, since a failed uplink means a lost day and a waste of money. Examining the process of creating this uplink, I tracked the use of the system developed for requesting observations as well as the development, from stage to stage, in forming an activity plan. I found the system for requesting observations was commonly misused, if used at all. There are half a dozen reports to document the creation of the uplink plan and often there are discrepancies among them. Despite this, the uplink process worked very well and MER has been one of the most successful missions for NASA in recent memory. Still it is clear there is room for improvement.

An Integrated Hot-Stage Microscope-Direct Analysis in Real Time-Mass Spectrometry System for Studying the Thermal Behavior of Materials.

PubMed

Ashton, Gage P; Harding, Lindsay P; Parkes, Gareth M B

2017-12-19

This paper describes a new analytical instrument that combines a precisely temperature-controlled hot-stage with digital microscopy and Direct Analysis in Real Time-mass spectrometry (DART-MS) detection. The novelty of the instrument lies in its ability to monitor processes as a function of temperature through the simultaneous recording of images, quantitative color changes, and mass spectra. The capability of the instrument was demonstrated through successful application to four very varied systems including profiling an organic reaction, decomposition of silicone polymers, and the desorption of rhodamine B from an alumina surface. The multidimensional, real-time analytical data provided by this instrument allow for a much greater insight into thermal processes than could be achieved previously.

Numerical investigation of shock induced bubble collapse in water

NASA Astrophysics Data System (ADS)

Apazidis, N.

2016-04-01

A semi-conservative, stable, interphase-capturing numerical scheme for shock propagation in heterogeneous systems is applied to the problem of shock propagation in liquid-gas systems. The scheme is based on the volume-fraction formulation of the equations of motion for liquid and gas phases with separate equations of state. The semi-conservative formulation of the governing equations ensures the absence of spurious pressure oscillations at the material interphases between liquid and gas. Interaction of a planar shock in water with a single spherical bubble as well as twin adjacent bubbles is investigated. Several stages of the interaction process are considered, including focusing of the transmitted shock within the deformed bubble, creation of a water-hammer shock as well as generation of high-speed liquid jet in the later stages of the process.

Effect of hot isostatic pressing on the structure and properties of cast polycrystalline gas-turbine blades made of nickel superalloys

NASA Astrophysics Data System (ADS)

Beresnev, A. G.

2012-05-01

A concept of a two-stage hot isostatic pressing (HIP) cycle is developed for castings made of nickel superalloys in order to minimize plastic deformation and the recrystallization ability of their structure. At the first stage of the cycle, diffusion pore dissolution is predominant due to the motion of vacancies toward grain boundaries in a polycrystal; at the second stage, retained coarse pores are filled during plastic deformation. The effect of uniform compression pressure during HIP and microstructure defects on the vacancy diffusion in nickel superalloys is estimated. A two-stage HIP regime is developed for processing of cast gas-turbine engine blades made of a ZhS6U alloy in order to substantially decrease the shrinkage porosity and to increase the high-temperature characteristics, including the creep and fatigue resistance.

Agricultural landscapes dynamic at the North-West of Russia

NASA Astrophysics Data System (ADS)

Guzel, N.

2012-04-01

The process of reduction of agrolandscapes has taken place some decades in the North-Western European Russia. During 100 last years the area of agricultural lands have reduced in 1,4 times on the Karelian Isthmus. The most part of it had been abandoned after change of State border after of the Second World War. The processes of overgrowing of the former agricultural lands are studied on the landscapes base. The types of landscapes are distinguished on the based of the morphological relief symptoms, characteristics of the structure rock and the humid regime. Agricultural lands occupy landscapes such as kames, sandy, sandy-loam, clayey plains, sometimes with excess moistening, sandy fluvioglacial plains, loamy morainic plains, mesotrophic and evtrophic peat-bogs. Four stages can be revealed. I - (period to 20 years after termination of agricultural use) - grass-herb meadow with unclosed brush II - (20 - 40) - shrub layer with closed or low-closed canopy and unclosed or low closed small-leaved regrowth III - (40 - 80) - closed small-leaved forest, sometime including the coniferous trees IY - predomination of the coniferous on small-leaved trees Reestablish vegetation successions can be realised by different ways, with different rate, including various trees and ecological groups of species in different landscapes. In the different sites many traits in common are discovered during this processes. The processes taking place in soil of abandoned agricultural lands are expressed more poorly than in vegetation as soil is more "conservative" element of landscape. Now most area occupies former agricultural lands, inhering on III stage and presenting itself small-leaved forest. Over the last decade because of a change in the socio-political situation there has emerged a tendency towards an increase in the area of the cultivated land in the Karelian Isthmus including the secondary development of previously abandoned lands. However, this process is going on spontaneously; there are quite a few cases of the use of woodland valuable in recreational and forestry respects for dacha or country-cottage construction. From fast change the pattern of ownership on ground is necessary urgent inventory of being available ground resources, including with the purposes of creation of new especially protected territories. It is important to emphasise, that to guards should be subject not only sites so-called quot.; untouched quot.; a nature, but also area with different overgrowth succession stages agricultural lands, where biodiversity raises.

Staging in bipolar disorder: from theoretical framework to clinical utility.

PubMed

Berk, Michael; Post, Robert; Ratheesh, Aswin; Gliddon, Emma; Singh, Ajeet; Vieta, Eduard; Carvalho, Andre F; Ashton, Melanie M; Berk, Lesley; Cotton, Susan M; McGorry, Patrick D; Fernandes, Brisa S; Yatham, Lakshmi N; Dodd, Seetal

2017-10-01

Illness staging is widely utilized in several medical disciplines to help predict course or prognosis, and optimize treatment. Staging models in psychiatry in general, and bipolar disorder in particular, depend on the premise that psychopathology moves along a predictable path: an at-risk or latency stage, a prodrome progressing to a first clinical threshold episode, and one or more recurrences with the potential to revert or progress to late or end-stage manifestations. The utility and validity of a staging model for bipolar disorder depend on its linking to clinical outcome, treatment response and neurobiological measures. These include progressive biochemical, neuroimaging and cognitive changes, and potentially stage-specific differences in response to pharmacological and psychosocial treatments. Mechanistically, staging models imply the presence of an active disease process that, if not remediated, can lead to neuroprogression, a more malignant disease course and functional deterioration. Biological elements thought to be operative in bipolar disorder include a genetic diathesis, physical and psychic trauma, epigenetic changes, altered neurogenesis and apoptosis, mitochondrial dysfunction, inflammation, and oxidative stress. Many available agents, such as lithium, have effects on these targets. Staging models also suggest the utility of stage-specific treatment approaches that may not only target symptom reduction, but also impede illness neuroprogression. These treatment approaches range from prevention for at-risk individuals, to early intervention strategies for prodromal and newly diagnosed individuals, complex combination therapy for rapidly recurrent illness, and palliative-type approaches for those at chronic, late stages of illness. There is hope that prompt initiation of potentially disease modifying therapies may preclude or attenuate the cognitive and structural changes seen in the later stages of bipolar disorder. The aims of this paper are to: a) explore the current level of evidence supporting the descriptive staging of the syndromal pattern of bipolar disorder; b) describe preliminary attempts at validation; c) make recommendations for the direction of further studies; and d) provide a distillation of the potential clinical implications of staging in bipolar disorder within a broader transdiagnostic framework. © 2017 World Psychiatric Association.

[Role of an educational-and-methodological complex in the optimization of teaching at the stage of additional professional education of physicians in the specialty "anesthesiology and reanimatology"].

PubMed

Buniatian, A A; Sizova, Zh M; Vyzhigina, M A; Shikh, E V

2010-01-01

An educational-and-methodological complex (EMC) in the specialty 'Anesthesiology and Reanimatology", which promotes manageability, flexibility, and dynamism of an educational process, is of great importance in solving the problem in the systematization of knowledge and its best learning by physicians at a stage of additional professional education (APE). EMC is a set of educational-and-methodological materials required to organize and hold an educational process for the advanced training of anesthesiologists and resuscitation specialists at the stage of APE. EMC includes a syllabus for training in the area "Anesthesiology and Reanimatology" by the appropriate training pattern (certification cycles, topical advanced training cycles); a work program for training in the specialty "Anesthesiology and Reanimatology"; a work curriculums for training in allied specialties (surgery, traumatology and orthopedics, obstetrics and gynecology, and pediatrics); work programs on basic disciplines (pharmacology, normal and pathological physiology, normal anatomy, chemistry and biology); working programs on the area "Public health care and health care service", guidelines for the teacher; educational-and-methodological materials for the student; and quiz programs. The main point of EMC in the specialty "Anesthesiology and Reanimatology" is a work program. Thus, educational-and-methodological and teaching materials included into the EMC in the specialty 'Anesthesiology and Reanimatology" should envisage the logically successive exposition of a teaching material, the use of currently available methods and educational facilities, which facilitates the optimization of training of anesthesiologists and resuscitation specialists at the stage of APE.

Student Co-Inquirers: The Challenges and Benefits of Inclusive Research

ERIC Educational Resources Information Center

Welikala, Thushari; Atkin, Chris

2014-01-01

This article focuses on the process of conducting a research project which explored the university student experience across three different geopolitical contexts using students studying at an English university as co-inquirers. The project sample included students at different stages of their university experience (undergraduate, postgraduate and…

Urban development applications project. Urban technology transfer study

NASA Technical Reports Server (NTRS)

1975-01-01

Technology transfer is defined along with reasons for attempting to transfer technology. Topics discussed include theoretical models, stages of the innovation model, communication process model, behavior of industrial organizations, problem identification, technology search and match, establishment of a market mechanism, applications engineering, commercialization, and management of technology transfer.

Tissue-specific Regulation of Porcine Prolactin Receptor Expression by Estrogen, Progesterone and Prolactin

USDA-ARS?s Scientific Manuscript database

Prolactin (PRL) acts through its receptor (PRLR) via both endocrine and local paracrine/autocrine pathways to regulate biological processes including reproduction and lactation. We analyzed the tissue and stage of gestation-specific regulation of PRL and PRLR expression in various tissues of pigs. ...

7 CFR 201.72 - Production of all classes of certified seed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... stages of certification including seeding, harvesting, processing, and labeling of the seed. (b) The unit... 7 Agriculture 3 2012-01-01 2012-01-01 false Production of all classes of certified seed. 201.72... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED...

7 CFR 201.72 - Production of all classes of certified seed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... stages of certification including seeding, harvesting, processing, and labeling of the seed. (b) The unit... 7 Agriculture 3 2013-01-01 2013-01-01 false Production of all classes of certified seed. 201.72... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED...

7 CFR 201.72 - Production of all classes of certified seed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... stages of certification including seeding, harvesting, processing, and labeling of the seed. (b) The unit... 7 Agriculture 3 2010-01-01 2010-01-01 false Production of all classes of certified seed. 201.72... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED...

7 CFR 201.72 - Production of all classes of certified seed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... stages of certification including seeding, harvesting, processing, and labeling of the seed. (b) The unit... 7 Agriculture 3 2014-01-01 2014-01-01 false Production of all classes of certified seed. 201.72... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED...

7 CFR 201.72 - Production of all classes of certified seed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... stages of certification including seeding, harvesting, processing, and labeling of the seed. (b) The unit... 7 Agriculture 3 2011-01-01 2011-01-01 false Production of all classes of certified seed. 201.72... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED...

The forgotten stage of forest succession: early-successional ecosystems on forest sites

Treesearch

Mark E. Swanson; Jerry F. Franklin; Robert L. Beschta; Charles M. Crisafulli; Dominick A. DellaSala; Richard L. Hutto; David B. Lindenmayer; Frederick J. Swanson

2010-01-01

Early-successional forest ecosystems that develop after stand-replacing or partial disturbances are diverse in species, processes, and structure. Post-disturbance ecosystems are also often rich in biological legacies, including surviving organisms and organically derived structures, such as woody debris. These legacies and postdisturbance plant communities provide...

Understanding Grief & Loss.

ERIC Educational Resources Information Center

Parker, Judith

1995-01-01

Although death is the one certainty in life, death or the grieving process is rarely discussed. Grief includes physical, emotional, spiritual, and psychological reactions to loss, and is not limited to feelings about death. Grief can be the response to loss of home or country, separation or displacement, and changes resulting from new life stages.…

From Flowers to Worms: Understanding Nature's Cycle.

ERIC Educational Resources Information Center

Texas Child Care, 1995

1995-01-01

Gardening helps children learn how plants sprout, grow, bloom, and then wither away, leaving seeds behind. Participating in this natural process allows children to experience the stages of life. Suggested gardening activities include studying dandelions, focusing on culture for garden plant selection, and constructing a worm box or worm terrarium…

Qualitative Analysis on Stage: Making the Research Process More Public.

ERIC Educational Resources Information Center

Anfara, Vincent A., Jr.; Brown, Kathleen M.

The increased use of qualitative research methods has spurred interest in developing formal standards for assessing its validity. These standards, however, fall short if they do not include public disclosure of methods as a criterion. The researcher must be accountable in documenting the actions associated with establishing internal validity…

The Role of Individualism-Collectivism in the Individual Creative Process

ERIC Educational Resources Information Center

Yao, Xiang; Wang, Shuhong; Dang, Junhua; Wang, Lei

2012-01-01

This study is among the first to examine how individuals' cultural value orientations impact 2 separate stages of creativity: idea generation and idea implementation. A total of 247 Chinese employees completed questionnaires including individualism-collectivism culture orientation and their idea generation behavior. Supervisor ratings of idea…

AQAK: A Library Anxiety Scale for Undergraduate Students

ERIC Educational Resources Information Center

Anwar, Mumtaz A.; Al-Qallaf, Charlene L.; Al-Kandari, Noriah M.; Al-Ansari, Husain A.

2012-01-01

The library environment has drastically changed since 1992 when Bostick's Library Anxiety Scale was developed. This project aimed to develop a scale specifically for undergraduate students. A three-stage study was conducted, using students of Kuwait University. A variety of statistical measures, including factor analysis, were used to process the…

Reengineering Activities in K-8 Classrooms: Focus on Formative Feedback

ERIC Educational Resources Information Center

Foster, Patrick N.

2006-01-01

Almost every K-8 technology activity includes feedback. Technology teachers generally view the input-process-output paradigm as being incomplete. A step toward completion would be the inclusion of a "feedback" component incorporating reengineering. This article provides an example of how one activity evolved through several stages to include…

Prosodic Encoding in Silent Reading.

ERIC Educational Resources Information Center

Wilkenfeld, Deborah

In silent reading, short-memory tasks, such as semantic and syntactic processing, require a stage of phonetic encoding between visual representation and the actual extraction of meaning, and this encoding includes prosodic as well as segmental features. To test for this suprasegmental coding, an experiment was conducted in which subjects were…

Early, Equivalent ERP Masked Priming Effects for Regular and Irregular Morphology

ERIC Educational Resources Information Center

Morris, Joanna; Stockall, Linnaea

2012-01-01

Converging evidence from behavioral masked priming (Rastle & Davis, 2008), EEG masked priming (Morris, Frank, Grainger, & Holcomb, 2007) and single word MEG (Zweig & Pylkkanen, 2008) experiments has provided robust support for a model of lexical processing which includes an early, automatic, visual word form based stage of morphological parsing…

Common Ground: An Interactive Visual Exploration and Discovery for Complex Health Data

DTIC Science & Technology

2015-04-01

working with Intermountain Healthcare on a new rich dataset extracted directly from medical notes using natural language processing ( NLP ) algorithms...probabilities based on a state- of-the-art NLP classifiers. At that stage the data did not include geographic information or temporal information but we

Behavior Psychology in the Schools: Innovations in Evaluation, Support, and Consultation.

ERIC Educational Resources Information Center

Luiselli, James K., Ed.; Diament, Charles, Ed.

This volume of "Behavior Psychology in the Schools," discusses key topics in behavioral consultations in public school settings. Following an introduction, articles include: (1) "Focus, Scope, and Practice of Behavioral Consultation to Public Schools" (James K. Luiselli), which describes a four-stage process of consultation and…

[Assessment of the validity and reliability of the processes of change scale based on the transtheoretical model of vegetable consumption behavior in Japanese male workers].

PubMed

Kushida, Osamu; Murayama, Nobuko

2012-12-01

A core construct of the Transtheoretical model is that the processes and stages of change are strongly related to observable behavioral changes. We created the Processes of Change Scale of vegetable consumption behavior and examined the validity and reliability of this scale. In September 2009, a self-administered questionnaire was administered to male Japanese employees, aged 20-59 years, working at 20 worksites in Niigata City in Japan. The stages of change (precontempration, contemplation, preparation, action, and maintenance stage) were measured using 2 items that assessed participants' current implementation of the target behavior (eating 5 or more servings of vegetables per day) and their readiness to change their habits. The Processes of Change Scale of vegetable consumption behavior comprised 10 items assessing 5 cognitive processes (consciousness raising, emotional arousal, environmental reevaluation, self-reevaluation, and social liberation) and 5 behavioral processes (commitment, rewards, helping relationships, countering, and environment control). Each item was selected from an existing scale. Decisional balance (pros [2 items] and cons [2 items]), and self-efficacy (3 items) were also assessed, because these constructs were considered to be relevant to the processes of change. The internal consistency reliability of the scale was examined using Cronbach's alpha. Its construct validity was examined using a factor analysis of the processes of change, decisional balance, and self-efficacy variables, while its criterion-related validity was determined by assessing the association between the scale scores and the stages of change. The data of 527 (out of 600) participants (mean age, 41.1 years) were analyzed. Results indicated that the Processes of Change Scale had sufficient internal consistency reliability (Cronbach's alpha: cognitive processes=0.722, behavioral processes=0.803). The processes of change were divided into 2 factors: "consciousness raising, emotional arousal, environmental reevaluation, self-reevaluation, commitment, rewards, helping relationships, and social liberation" and "countering and environment control" in the factor analysis. Moreover, each construct--the processes of change, decisional balance, and self-efficacy--could be classified into different factors. The scores for cognitive processes were higher in the contemplation and preparation stages than in the precontemplation stage (P<0.05). Scores for behavioral processes increased from the precontemplation stage to the preparation stages (P<0.05), and were higher in the action + maintenance stage than in the precontemplation stage (P< 0.05). For male workers, the Processes of Change Scale has sufficient validity and reliability, as demonstrated by the internal fitness and the construct and criterion-related validity of the scale found in this study.

Transcriptomic Analysis of Grapevine (cv. Summer Black) Leaf, Using the Illumina Platform

PubMed Central

Pervaiz, Tariq; Haifeng, Jia; Salman Haider, Muhammad; Cheng, Zhang; Cui, Mengjie; Wang, Mengqi; Cui, Liwen; Wang, Xicheng; Fang, Jinggui

2016-01-01

Proceeding to illumina sequencing, determining RNA integrity numbers for poly RNA were separated from each of the four developmental stages of cv. Summer Black leaves by using Illumina HiSeq™ 2000. The sums of 272,941,656 reads were generated from vitis vinifera leaf at four different developmental stages, with more than 27 billion nucleotides of the sequence data. At each growth stage, RNA samples were indexed through unique nucleic acid identifiers and sequenced. KEGG annotation results depicted that the highest number of transcripts in 2,963 (2Avs4A) followed by 1Avs4A (2,920), and 3Avs4A (2,294) out of 15,614 (71%) transcripts were recorded. In comparison, a total of 1,532 transcripts were annotated in GOs, including Cellular component, with the highest number in “Cell part” 251 out of 353 transcripts (71.1%), followed by intracellular organelle 163 out of 353 transcripts (46.2%), while in molecular function and metabolic process 375 out of 525 (71.4%) transcripts, multicellular organism process 40 out of 525 (7.6%) transcripts in biological process were most common in 1Avs2A. While in case of 1Avs3A, cell part 476 out of 662 transcripts (71.9%), and membrane-bounded organelle 263 out of 662 transcripts (39.7%) were recorded in Cellular component. In the grapevine transcriptome, during the initial stages of leaf development 1Avs2A showed single transcript was down-regulated and none of them were up-regulated. While in comparison of 1A to 3A showed one up-regulated (photosystem II reaction center protein C) and one down regulated (conserved gene of unknown function) transcripts, during the hormone regulating pathway namely SAUR-like auxin-responsive protein family having 2 up-regulated and 7 down-regulated transcripts, phytochrome-associated protein showed 1 up-regulated and 9 down-regulated transcripts, whereas genes associated with the Leucine-rich repeat protein kinase family protein showed 7 up-regulated and 1 down-regulated transcript, meanwhile Auxin Resistant 2 has single up-regulated transcript in second developmental stage, although 3 were down-regulated at lateral growth stages (3A and 4A). In the present study, 489 secondary metabolic pathways related genes were identified during leaf growth, which mainly includes alkaloid (40), anthocyanins (21), Diterpenoid (144), Monoterpenoid (90) and Flavonoids (93). Quantitative real-time PCR was applied to validate 10 differentially expressed transcripts patterns from flower, leaf and fruit metabolic pathways at different growth stages. PMID:26824474

A new gnathiid (Crustacea: Isopoda) parasitizing two species of requiem sharks from Lizard Island, Great Barrier Reef, Australia.

PubMed

Coetzee, Maryke L; Smit, Nico J; Grutter, Alexandra S; Davies, Angela J

2008-06-01

Third-stage juveniles (praniza 3) of Gnathia grandilaris n. sp. were collected from the gill filaments and septa of 5 requiem sharks, including a white tip reef shark, Triaenodon obesus, and 4 grey reef sharks, Carcharhinus amblyrhynchos, at Lizard Island, Great Barrier Reef, Australia, in March 2002. Some juvenile gnathiids were then maintained in fresh sea water until they molted to adults. Adult males appeared 19 days following detachment of juveniles from host fishes, but no juveniles molted successfully into females. The current description is based, therefore, on bright field and scanning electron microscopy observations of adult males and third-stage juveniles. Unique features of the male include the triangular-shaped inferior medio-frontal process, 2 areolae on the dorsal surface of the pylopod, and a slender pleotelson (twice as long as wide) with lateral concavities. The third-stage juvenile has distinctive white pigmentation on the black pereon when alive, while the mandible has 9 triangular backwardly directed teeth. This species has the largest male and third-stage juvenile of any Gnathia spp. from Australia and of any gnathiid isopods associated with elasmobranchs.

Bridging the gap

PubMed Central

Mahler, Stephen M; Huang, Edwin P; Chin, David Y; Gray, Peter P

2011-01-01

Therapeutic monoclonal antibodies (mAbs) currently dominate the biologics marketplace. Development of a new therapeutic mAb candidate is a complex, multistep process and early stages of development typically begin in an academic research environment. Recently, a number of facilities and initiatives have been launched to aid researchers along this difficult path and facilitate progression of the next mAb blockbuster. Complementing this, there has been a renewed interest from the pharmaceutical industry to reconnect with academia in order to boost dwindling pipelines and encourage innovation. In this review, we examine the steps required to take a therapeutic mAb from discovery through early stage preclinical development and toward becoming a feasible clinical candidate. Discussion of the technologies used for mAb discovery, production in mammalian cells and innovations in single-use bioprocessing is included. We also examine regulatory requirements for product quality and characterization that should be considered at the earliest stages of mAb development. We provide details on the facilities available to help researchers and small-biotech build value into early stage product development, and include examples from within our own facility of how technologies are utilized and an analysis of our client base. PMID:21822050

Expression pattern of phb2 and its potential function in spermatogenesis of scallop ( Chlamys farreri)

NASA Astrophysics Data System (ADS)

Han, Tiantian; Ma, Xiaoshi; Liang, Shaoshuai; Gao, Beibei; Zhang, Zhifeng

2015-12-01

Prohibitin (PHB) participates in several biological processes including apoptosis, transcription regulation and suppression of cell proliferation in mammals. In this study, we cloned the full-length cDNA of prohibitin 2 ( Cf-phb2) from the testis of scallop ( Chlamys farreri). The deduced amino acid sequence presented a characteristic of PHB family with the PHB domain, and clustered with PHB2 of other species. Temporal and spatial expression of Cf-phb2 in testis during the reproductive cycle was detected by quantitative real-time PCR (qRT-PCR) and in situ hybridization. The expression of Cf-phb2 in the testis increased when testis developed from the resting stage to mature stage. The mRNA abundance of Cf-phb2 was the highest at mature stage, which was about 15-fold higher than that at proliferative stage. The expression of Cf-phb2 could be detected by in situ hybridization in all types of germ cells in testis, including spermatogonia, spermatocytes, spermatids and spermatozoa. The intensity of the signal increased with the spermatogenesis and was the highest in spermatids, which suggested that CF-PHB2 might affect the spermatogenesis of C. farreri.

Pulsed excimer laser processing for cost-effective solar cells

NASA Technical Reports Server (NTRS)

Wong, David C.

1985-01-01

The application of excimer laser in the fabrication of photovoltaic devices was investigated extensively. Processes included junction formation, laser assisted chemical vapor deposition metallization, and laser assisted chemical vapor deposition surface passivation. Results demonstrated that implementation of junction formation by laser annealing in production is feasible because of excellent control in junction depth and quality. Both metallization and surface passivation, however, were found impractical to be considered for manufacturing at this stage.

A Quantitative Acetylomic Analysis of Early Seed Development in Rice (Oryza sativa L.).

PubMed

Wang, Yifeng; Hou, Yuxuan; Qiu, Jiehua; Li, Zhiyong; Zhao, Juan; Tong, Xiaohong; Zhang, Jian

2017-06-27

PKA (protein lysine acetylation) is a critical post-translational modification that regulates various developmental processes, including seed development. However, the acetylation events and dynamics on a proteomic scale in this process remain largely unknown, especially in rice early seed development. We report the first quantitative acetylproteomic study focused on rice early seed development by employing a mass spectral-based (MS-based), label-free approach. A total of 1817 acetylsites on 1688 acetylpeptides from 972 acetylproteins were identified in pistils and seeds at three and seven days after pollination, including 268 acetyproteins differentially acetylated among the three stages. Motif-X analysis revealed that six significantly enriched motifs, such as (DxkK), (kH) and (kY) around the acetylsites of the identified rice seed acetylproteins. Differentially acetylated proteins among the three stages, including adenosine diphosphate (ADP) -glucose pyrophosphorylases (AGPs), PDIL1-1 (protein disulfide isomerase like 1-1), hexokinases, pyruvate dehydrogenase complex (PDC) and numerous other regulators that are extensively involved in the starch and sucrose metabolism, glycolysis/gluconeogenesis, tricarboxylic acid (TCA) cycle and photosynthesis pathways during early seed development. This study greatly expanded the rice acetylome dataset, and shed novel insight into the regulatory roles of PKA in rice early seed development.

Stage line diagram: an age-conditional reference diagram for tracking development.

PubMed

van Buuren, Stef; Ooms, Jeroen C L

2009-05-15

This paper presents a method for calculating stage line diagrams, a novel type of reference diagram useful for tracking developmental processes over time. Potential fields of applications include: dentistry (tooth eruption), oncology (tumor grading, cancer staging), virology (HIV infection and disease staging), psychology (stages of cognitive development), human development (pubertal stages) and chronic diseases (stages of dementia). Transition probabilities between successive stages are modeled as smoothly varying functions of age. Age-conditional references are calculated from the modeled probabilities by the mid-P value. It is possible to eliminate the influence of age by calculating standard deviation scores (SDS). The method is applied to the empirical data to produce reference charts on secondary sexual maturation. The mean of the empirical SDS in the reference population is close to zero, whereas the variance depends on age. The stage line diagram provides quick insight into both status (in SDS) and tempo (in SDS/year) of development of an individual child. Other measures (e.g. height SDS, body mass index SDS) from the same child can be added to the chart. Diagrams for sexual maturation are available as a web application at http://vps.stefvanbuuren.nl/puberty. The stage line diagram expresses status and tempo of discrete changes on a continuous scale. Wider application of these measures scores opens up new analytic possibilities. (c) 2009 John Wiley & Sons, Ltd.

Environmental Variability and Fluctuation of Coccidioidomycosis (Valley Fever) In California: Based on a New Framework Involving Fungal Life Cycle

NASA Astrophysics Data System (ADS)

Jia, S.; Okin, G. S.; Shafir, S. C.

2013-12-01

Coccidioidomycosis (valley fever), caused by inhalation of spores from pathogenic fungus includingCoccidiodes immitis (C. immitis) and Coccidioides posadasii (C. posadasii), is a disease endemic to arid regions in the southwest US, as well as parts of Central and South America. With a projected increase of drought in this region, an improved understanding of environmental factors behind the outbreaks of coccidioidomycosis will enable the prediction of coccidioidomycosis in a changing climate regime. Previous research shows the infections correlate with climate conditions including precipitation, temperature, and dust. However, most studies focus only on the environmental conditions of fungus growth, which is the first stage in the fungal life cycle. In contrast, we extend the analysis to the following two stages in the life cycle, arthrospore formation and dispersal, to form a better model to predict the disease outbreaks. Besides climate conditions, we use relative spectral mixture analysis (RSMA) based on MODIS MOD43 nadir BRDF adjusted reflectance (NBAR) data to derive the relative dynamics of green vegetation, non-photosynthetic vegetation and bare soil coverage as better indicators of soil moisture, which is important for arthospore formation and dispersal. After detecting the hotspots of disease outbreaks, we correlate seasonal incidence from 2000 to 2010 with the environmental variables zero to eight seasons before to obtain candidates for stepwise regression. Regression result shows a seasonal difference in the leading explanatory variables. Such difference indicates the different seasonal main influential process from fungal life cycle. C. immitis (fungus responsible for coccidioidomycosis outbreaks in California) growth explains outbreaks in winter and fall better than other two stages in the life cycle, while arthospore formation is more responsible for spring and summer outbreaks. As the driest season, summer has the largest area related with arthospore dispersal. The seasonal difference of main influential process relates to the length of lags between the outbreaks and stages in fungal life cycle. During wet seasons of California including winter and fall, outbreaks are less correlated with the short-lag process such as dispersal of arthospores because of high soil moisture. In contrast, the long-lag process like C.immitis growth is influential on outbreaks in wet seasons. The arthospore formation, especially during the latest dry season (with a lag less than one year), is more responsible for outbreaks in spring and summer, when the influence of C. immitis growth is dampened by time. However, arthospores formed and preserved years ago may introduce uncertainty to the seasonal lag patterns. The long lags also exist in outbreaks related to arthospore formation. By including all three stages of fungal life cycle, we formed a more comprehensive framework in explaining the relationship between environmental conditions and disease outbreaks. Such analysis can be extended to a finer temporal resolution (e.g. per month) to obtain a clearer picture between environmental variability and coccidioidomycosis fluctuation.

Formation of the Archean crust of the ancient Vodlozero domain (Baltic shield)

NASA Astrophysics Data System (ADS)

Arestova, N. A.; Chekulaev, V. P.; Lobach-Zhuchenko, S. B.; Kucherovskii, G. A.

2015-03-01

The available geological, petrological, and isotopic data on Archean rocks of the Baltic shield are used to analyze the formation of the crust of the ancient Vodlozero domain. This made it possible to reveal the succession of endogenic processes in different parts of the domain and correlate them between each other. Several stages of magmatic processes reflecting changes in magma-generation environments are definable in the crust formation. The earliest stages of magmatism (3.24 and 3.13-3.15 Ga) are mostly represented by rocks of the tonalite-trondhjemite-granodiorite association. The next stage of endogenic activity (3020-2900 Ma) was marked by the formation of volcanics of the komatiite-basalt and andesite-dacite associations constituting greenstone belts in marginal parts of the Vodlozero domain and basic dikes accompanied by layered pyroxenite-norite-diorite intrusion in its central part. These basic bodies crossing earlier tonalities were formed in extension settings related to the formation of the mantle plume, which is confirmed by the rock composition. This stage culminated in the formation of trondhjemites at margins of greenstone structure. The next stage of endogenic activity commenced at 2890-2840 Ma by the emplacement of high-magnesian gabbro and diorite dikes in the western margin of the domain, where they cross rocks of the tonalitetrondhjemite association. This stage was marked by the formation of intermediate-acid subvolcanic bodies and dikes as well as basite intrusions including the layered and differentiated Semch intrusion, the largest one in the Vodlozero domain. The stage culminated at approximately 2850 Ma in the emplacement of tonalities of the limited distribution being represented by the Shilos massif in the north of the domain and Shal'skii massif on the eastern shore of Lake Onega. The important stage in the geological history of the Vodlozero domain is the formation of the intracratonic Matkalakhta greenstone belt at approximately 2.8 Ga, which includes arenite quartzite and graywackes and polymictic conglomerates developed in the Lake Oster area in addition to volcanics. These rocks indicate a stable tectonic regime, which resulted in deep erosion of the crust. The emplacement of sanukitoids (2.73-2.74 Ga) as well as subsequent two-feldspar granites (2.68-2.70 Ga) and basite dikes (2.61-2.65 Ga) may be considered as resulting from the plume influence on the relatively stabilized sialic crust of the Baltic shield.

Guidelines for safe handling of hazardous drugs: A systematic review

PubMed Central

Bernabeu-Martínez, Mari A.; Ramos Merino, Mateo; Santos Gago, Juan M.; Álvarez Sabucedo, Luis M.; Wanden-Berghe, Carmina

2018-01-01

Objective To review the scientific literature related to the safe handling of hazardous drugs (HDs). Method Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. Results In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Conclusions Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion. PMID:29750798

Guidelines for safe handling of hazardous drugs: A systematic review.

PubMed

Bernabeu-Martínez, Mari A; Ramos Merino, Mateo; Santos Gago, Juan M; Álvarez Sabucedo, Luis M; Wanden-Berghe, Carmina; Sanz-Valero, Javier

2018-01-01

To review the scientific literature related to the safe handling of hazardous drugs (HDs). Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion.

Verification of a rapid mooring and foundation design tool

DOE PAGES

Weller, Sam D.; Hardwick, Jon; Gomez, Steven; ...

2018-02-15

Marine renewable energy devices require mooring and foundation systems that suitable in terms of device operation and are also robust and cost effective. In the initial stages of mooring and foundation development a large number of possible configuration permutations exist. Filtering of unsuitable designs is possible using information specific to the deployment site (i.e. bathymetry, environmental conditions) and device (i.e. mooring and/or foundation system role and cable connection requirements). The identification of a final solution requires detailed analysis, which includes load cases based on extreme environmental statistics following certification guidance processes. Static and/or quasi-static modelling of the mooring and/or foundationmore » system serves as an intermediate design filtering stage enabling dynamic time-domain analysis to be focused on a small number of potential configurations. Mooring and foundation design is therefore reliant on logical decision making throughout this stage-gate process. The open-source DTOcean (Optimal Design Tools for Ocean Energy Arrays) Tool includes a mooring and foundation module, which automates the configuration selection process for fixed and floating wave and tidal energy devices. As far as the authors are aware, this is one of the first tools to be developed for the purpose of identifying potential solutions during the initial stages of marine renewable energy design. While the mooring and foundation module does not replace a full design assessment, it provides in addition to suitable configuration solutions, assessments in terms of reliability, economics and environmental impact. This article provides insight into the solution identification approach used by the module and features the verification of both the mooring system calculations and the foundation design using commercial software. Several case studies are investigated: a floating wave energy converter and several anchoring systems. It is demonstrated that the mooring and foundation module is able to provide device and/or site developers with rapid mooring and foundation design solutions to appropriate design criteria.« less

Verification of a rapid mooring and foundation design tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weller, Sam D.; Hardwick, Jon; Gomez, Steven

Marine renewable energy devices require mooring and foundation systems that suitable in terms of device operation and are also robust and cost effective. In the initial stages of mooring and foundation development a large number of possible configuration permutations exist. Filtering of unsuitable designs is possible using information specific to the deployment site (i.e. bathymetry, environmental conditions) and device (i.e. mooring and/or foundation system role and cable connection requirements). The identification of a final solution requires detailed analysis, which includes load cases based on extreme environmental statistics following certification guidance processes. Static and/or quasi-static modelling of the mooring and/or foundationmore » system serves as an intermediate design filtering stage enabling dynamic time-domain analysis to be focused on a small number of potential configurations. Mooring and foundation design is therefore reliant on logical decision making throughout this stage-gate process. The open-source DTOcean (Optimal Design Tools for Ocean Energy Arrays) Tool includes a mooring and foundation module, which automates the configuration selection process for fixed and floating wave and tidal energy devices. As far as the authors are aware, this is one of the first tools to be developed for the purpose of identifying potential solutions during the initial stages of marine renewable energy design. While the mooring and foundation module does not replace a full design assessment, it provides in addition to suitable configuration solutions, assessments in terms of reliability, economics and environmental impact. This article provides insight into the solution identification approach used by the module and features the verification of both the mooring system calculations and the foundation design using commercial software. Several case studies are investigated: a floating wave energy converter and several anchoring systems. It is demonstrated that the mooring and foundation module is able to provide device and/or site developers with rapid mooring and foundation design solutions to appropriate design criteria.« less

Cultural and Linguistic Adaptation of a Healthy Diet Text Message Intervention for Hispanic Adults

PubMed Central

Cameron, Linda D.; Durazo, Arturo; Ramirez, A. Susana; Corona, Roberto; Ultreras, Mayra; Piva, Sonia

2017-01-01

Hispanics represent a critical target for culturally-adapted diet interventions. In this formative research, we translated HealthyYouTXT, an mHealth program developed by the U.S. National Cancer Institute, into HealthyYouTXT en Español, a linguistically and culturally appropriate version for Spanish speakers. We report a three-stage, mixed-methods process through which we culturally adapted the text messages, evaluated their acceptability, and revised the program based on the findings. In Stage 1, we conducted initial translations and adaptations of the text libraries using an iterative, principle-guided process. In Stage 2, we used mixed methods including focus groups and surveys with 109 Hispanic adults to evaluate the acceptability and cultural appropriateness of the program. Further, we used survey data to evaluate whether Self-Determination Theory factors (used to develop HealthyYouTXT) of autonomous motivation, controlled motivation, and amotivation and Hispanic cultural beliefs about familism, fatalism, and destiny predict program interest and its perceived efficacy. Mixed-methods analyses revealed substantial interest in HealthyYouTXT, with most participants expressing substantial interest in using it and viewing it as highly efficacious. Both cultural beliefs (i.e., beliefs in destiny and, for men, high familism) and SDT motivations (i.e., autonomy) predicted HealthyYouTXT evaluations, suggesting utility in emphasizing them in messages. Higher destiny beliefs predicted lower interest and perceived efficacy, suggesting they could impede program use. In Stage 3, we implemented the mixed-methods findings to generate a revised HealthyYouTXT en Español. The emergent linguistic principles and multi-stage, multi-methods process can be applied beneficially in health communication adaptations. PMID:28248628

The ideas about advanced life support and affecting factors at the end-stage of life in a hospital in Turkey

PubMed Central

Albayrak, Turgay; Şencan, İrfan; Akça, Ömer; Aksoy, Hilal; Ünsal, Selim; Bülbül, İskender; Bahadır, Adem; Kasım, İsmail; Kahveci, Rabia; Özkara, Adem

2017-01-01

Background The participation of the people in health decisions may be structured in various levels. One of these is participation in decisions for the treatment. “Advanced directives” is one of the examples for the participation in decisions for the treatment. Aim We wanted to determine the decisions on advanced life support at the end-stage of life in case of a life-threatening illness for the people themselves and their first degree relatives and the factors effecting these decisions. Design and setting The cross-sectional study was conducted with volunteers among patients and patient relatives who applied to all polyclinics of the Ankara Numune Training and Research Hospital except the emergency, oncology and psychiatry polyclinics between 15.12.2012 and 15.03.2013. Method A questionnaire, the Hospital Anxiety Depression (HAD) scale, and Templer’s Death Anxiety Scale (TDA) were applied to all individuals. SPSS for Win. Ver. 17.0 and MS-Excel 2010 Starter software bundles were used for all statistical analysis and calculations. Results The participants want both themselves and their first degree relatives included in end-stage decision-making process. Therefore, the patients and their families should be informed adequately during decision making process and quality communication must be provided. Conclusion Participants who have given their end-stage decisions previously want to be treated according to these decisions. This desire can just be possible by advanced directives.When moral and material loads of end-stage process are taken into consideration, countries, in which advanced directives are practiced, should be examined well and participants’ desire should be evaluated in terms of practicability. PMID:28732071

Consensus Statements for Management of Barrett’s Dysplasia and Early-Stage Esophageal Adenocarcinoma, Based on a Delphi Process

PubMed Central

BENNETT, CATHY; VAKIL, NIMISH; BERGMAN, JACQUES; HARRISON, REBECCA; ODZE, ROBERT; VIETH, MICHAEL; SANDERS, SCOTT; GAY, LAURA; PECH, OLIVER; LONGCROFT–WHEATON, GAIUS; ROMERO, YVONNE; INADOMI, JOHN; TACK, JAN; CORLEY, DOUGLAS A.; MANNER, HENDRIK; GREEN, SUSI; DULAIMI, DAVID AL; ALI, HAYTHEM; ALLUM, BILL; ANDERSON, MARK; CURTIS, HOWARD; FALK, GARY; FENNERTY, M. BRIAN; FULLARTON, GRANT; KRISHNADATH, KAUSILIA; MELTZER, STEPHEN J.; ARMSTRONG, DAVID; GANZ, ROBERT; CENGIA, GIANPAOLO; GOING, JAMES J.; GOLDBLUM, JOHN; GORDON, CHARLES; GRABSCH, HEIKE; HAIGH, CHRIS; HONGO, MICHIO; JOHNSTON, DAVID; FORBES–YOUNG, RICKY; KAY, ELAINE; KAYE, PHILIP; LERUT, TONI; LOVAT, LAURENCE B.; LUNDELL, LARS; MAIRS, PHILIP; SHIMODA, TADAKUZA; SPECHLER, STUART; SONTAG, STEPHEN; MALFERTHEINER, PETER; MURRAY, IAIN; NANJI, MANOJ; POLLER, DAVID; RAGUNATH, KRISH; REGULA, JAROSLAW; CESTARI, RENZO; SHEPHERD, NEIL; SINGH, RAJVINDER; STEIN, HUBERT J.; TALLEY, NICHOLAS J.; GALMICHE, JEAN–PAUL; THAM, TONY C. K.; WATSON, PETER; YERIAN, LISA; RUGGE, MASSIMO; RICE, THOMAS W.; HART, JOHN; GITTENS, STUART; HEWIN, DAVID; HOCHBERGER, JUERGEN; KAHRILAS, PETER; PRESTON, SEAN; SAMPLINER, RICHARD; SHARMA, PRATEEK; STUART, ROBERT; WANG, KENNETH; WAXMAN, IRVING; ABLEY, CHRIS; LOFT, DUNCAN; PENMAN, IAN; SHAHEEN, NICHOLAS J.; CHAK, AMITABH; DAVIES, GARETH; DUNN, LORNA; FALCK–YTTER, YNGVE; DECAESTECKER, JOHN; BHANDARI, PRADEEP; ELL, CHRISTIAN; GRIFFIN, S. MICHAEL; ATTWOOD, STEPHEN; BARR, HUGH; ALLEN, JOHN; FERGUSON, MARK K.; MOAYYEDI, PAUL; JANKOWSKI, JANUSZ A. Z.

2017-01-01

BACKGROUND & AIMS Esophageal adenocarcinoma (EA) is increasingly common among patients with Barrett’s esophagus (BE). We aimed to provide consensus recommendations based on the medical literature that clinicians could use to manage patients with BE and low-grade dysplasia, high-grade dysplasia (HGD), or early-stage EA. METHODS We performed an international, multidisciplinary, systematic, evidence-based review of different management strategies for patients with BE and dysplasia or early-stage EA. We used a Delphi process to develop consensus statements. The results of literature searches were screened using a unique, interactive, Web-based data-sifting platform; we used 11,904 papers to inform the choice of statements selected. An a priori threshold of 80% agreement was used to establish consensus for each statement. RESULTS Eighty-one of the 91 statements achieved consensus despite generally low quality of evidence, including 8 clinical statements: (1) specimens from endoscopic resection are better than biopsies for staging lesions, (2) it is important to carefully map the size of the dysplastic areas, (3) patients that receive ablative or surgical therapy require endoscopic follow-up, (4) high-resolution endoscopy is necessary for accurate diagnosis, (5) endoscopic therapy for HGD is preferred to surveillance, (6) endoscopic therapy for HGD is preferred to surgery, (7) the combination of endoscopic resection and radiofrequency ablation is the most effective therapy, and (8) after endoscopic removal of lesions from patients with HGD, all areas of BE should be ablated. CONCLUSIONS We developed a data-sifting platform and used the Delphi process to create evidence-based consensus statements for the management of patients with BE and early-stage EA. This approach identified important clinical features of the diseases and areas for future studies. PMID:22537613

Lysine acetylation in sexual stage malaria parasites is a target for antimalarial small molecules.

PubMed

Trenholme, Katharine; Marek, Linda; Duffy, Sandra; Pradel, Gabriele; Fisher, Gillian; Hansen, Finn K; Skinner-Adams, Tina S; Butterworth, Alice; Ngwa, Che Julius; Moecking, Jonas; Goodman, Christopher D; McFadden, Geoffrey I; Sumanadasa, Subathdrage D M; Fairlie, David P; Avery, Vicky M; Kurz, Thomas; Andrews, Katherine T

2014-07-01

Therapies to prevent transmission of malaria parasites to the mosquito vector are a vital part of the global malaria elimination agenda. Primaquine is currently the only drug with such activity; however, its use is limited by side effects. The development of transmission-blocking strategies requires an understanding of sexual stage malaria parasite (gametocyte) biology and the identification of new drug leads. Lysine acetylation is an important posttranslational modification involved in regulating eukaryotic gene expression and other essential processes. Interfering with this process with histone deacetylase (HDAC) inhibitors is a validated strategy for cancer and other diseases, including asexual stage malaria parasites. Here we confirm the expression of at least one HDAC protein in Plasmodium falciparum gametocytes and show that histone and nonhistone protein acetylation occurs in this life cycle stage. The activity of the canonical HDAC inhibitors trichostatin A (TSA) and suberoylanilide hydroxamic acid (SAHA; Vorinostat) and a panel of novel HDAC inhibitors on early/late-stage gametocytes and on gamete formation was examined. Several compounds displayed early/late-stage gametocytocidal activity, with TSA being the most potent (50% inhibitory concentration, 70 to 90 nM). In contrast, no inhibitory activity was observed in P. falciparum gametocyte exflagellation experiments. Gametocytocidal HDAC inhibitors caused hyperacetylation of gametocyte histones, consistent with a mode of action targeting HDAC activity. Our data identify HDAC inhibitors as being among a limited number of compounds that target both asexual and sexual stage malaria parasites, making them a potential new starting point for gametocytocidal drug leads and valuable tools for dissecting gametocyte biology. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

The genome and transcriptome of the enteric parasite Entamoeba invadens, a model for encystation

PubMed Central

2013-01-01

Background Several eukaryotic parasites form cysts that transmit infection. The process is found in diverse organisms such as Toxoplasma, Giardia, and nematodes. In Entamoeba histolytica this process cannot be induced in vitro, making it difficult to study. In Entamoeba invadens, stage conversion can be induced, but its utility as a model system to study developmental biology has been limited by a lack of genomic resources. We carried out genome and transcriptome sequencing of E. invadens to identify molecular processes involved in stage conversion. Results We report the sequencing and assembly of the E. invadens genome and use whole transcriptome sequencing to characterize changes in gene expression during encystation and excystation. The E. invadens genome is larger than that of E. histolytica, apparently largely due to expansion of intergenic regions; overall gene number and the machinery for gene regulation are conserved between the species. Over half the genes are regulated during the switch between morphological forms and a key signaling molecule, phospholipase D, appears to regulate encystation. We provide evidence for the occurrence of meiosis during encystation, suggesting that stage conversion may play a key role in recombination between strains. Conclusions Our analysis demonstrates that a number of core processes are common to encystation between distantly related parasites, including meiosis, lipid signaling and RNA modification. These data provide a foundation for understanding the developmental cascade in the important human pathogen E. histolytica and highlight conserved processes more widely relevant in enteric pathogens. PMID:23889909

The direct liquefaction proof of concept program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstratingmore » optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.« less

Equity in interviews: do personal characteristics impact on admission interview scores?

PubMed

Lumb, Andrew B; Homer, Matthew; Miller, Amy

2010-11-01

Research indicates that some social groups are disadvantaged by medical school selection systems. The stage(s) of a selection process at which this occurs is unknown, but at interview, when applicant and interviewer are face-to-face, there is potential for social bias to occur. We performed a detailed audit of the interview process for a single-entry year to a large UK medical school. Our audit included investigating the personal characteristics of both interviewees and interviewers to find out whether any of these factors, including the degree of social matching between individual pairs of interviewees and interviewers, influenced the interview scores awarded. A total of 320 interviewers interviewed 734 applicants, providing complete data for 2007 interviewer-interviewee interactions. The reliability of the interview process was estimated using generalisability theory at 0.82-0.87. For both interviewers and interviewees, gender, ethnic background, socio-economic group and type of school attended had no influence on the interview scores awarded or achieved. Staff and student interviewer marks did not differ significantly. Although numbers in each group of staff interviewers were too small for formal statistical analysis, there were no obvious differences in marks awarded between different medical specialties or between interviewers with varying amounts of interviewing experience. Our data provide reassurance that the interview does not seem to be the stage of selection at which some social groups are disadvantaged. These results support the continued involvement of senior medical students in the interview process. Despite the lack of evidence that an interview is useful for predicting future academic or clinical success, most medical schools continue to use interviews as a fundamental component of their selection process. Our study has shown that at least this arguably misplaced reliance upon interviewing is not introducing further social bias into the selection system. © Blackwell Publishing Ltd 2010.

Universal description of III-V/Si epitaxial growth processes

NASA Astrophysics Data System (ADS)

Lucci, I.; Charbonnier, S.; Pedesseau, L.; Vallet, M.; Cerutti, L.; Rodriguez, J.-B.; Tournié, E.; Bernard, R.; Létoublon, A.; Bertru, N.; Le Corre, A.; Rennesson, S.; Semond, F.; Patriarche, G.; Largeau, L.; Turban, P.; Ponchet, A.; Cornet, C.

2018-06-01

Here, we experimentally and theoretically clarify III-V/Si crystal growth processes. Atomically resolved microscopy shows that monodomain three-dimensional islands are observed at the early stages of AlSb, AlN, and GaP epitaxy on Si, independently of misfit. It is also shown that complete III-V/Si wetting cannot be achieved in most III-V/Si systems. Surface/interface contributions to the free-energy variations are found to be prominent over strain relief processes. We finally propose a general and unified description of III-V/Si growth processes, including a description of the formation of antiphase boundaries.

Advanced Space Transportation Program (ASTP)

NASA Image and Video Library

2002-10-01

NASA's Marshall Space Flight Center in Huntsville, Alabama, manages the Space Launch Initiative (SLI), NASA's priority developmental program focused on empowering America's leadership in space. SLI includes commercial, higher education and defense partnerships and contracts to offer widespread participation in both the risk and success of developing our nation's next-generation reusable launch vehicle. This photo depicts an artist's concept of a future second-generation launch vehicle during separation of stages. For SLI, architecture definition includes all components of the next-generation reusable launch system: Earth-to-orbit vehicles (the Space Shuttle is the first-generation earth-to-orbit vehicle), crew transfer vehicles, transfer stages, ground processing systems, flight operations systems, and development of business case strategies. Three contractor teams have each been funded to develop potential second generation reusable launch system architectures: The Boeing Company of Seal Beach, California; Lockheed Martin Corporation of Denver, Colorado; a team including Northrop Grumman of El Segundo, California; and Orbital Sciences Corporation of Dulles, Virginia.

Converting baker's waste into alcohol. Revised final progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halsey, R.; Wilson, P.B.

All types of baker's waste (including waste from candy manufacturers) can be converted into alcohol to be used as a fuel. All types of waste at any stage in process can be converted, such as: basic ingredients (including floor sweepings); dry mixes (including floor sweepings); dough at any stage; partially or fully cooked products; and day old returned products. The basic steps are the same, only the initial preparation will vary slightly. The variation will be: amount of water to be added and amount and type of nutrients (if any) to be added. The basic steps are: slurrying, liquefying tomore » put starch into liquid state, saccharifying to convert starch into fermentable sugars, fermentation to convert sugars into alcohol, and distillation to separate the alcohol from the mash. Each step is discussed in detail along with problems that may arise. Directions are given and materials (enzymes, yeast, etc.) and equipment are descibed briefly.« less

Validating a Measure of Stages of Change in Career Development

ERIC Educational Resources Information Center

Hammond, Marie S.; Michael, Tony; Luke, Charles

2017-01-01

Research on the processes of change in career development has focused on developmental stages rather than processes. This manuscript reports on the development and validation of the stages of change-career development scale, adapted from McConnaughy, Prochaska, & Velicer (1983) measure of stages of change in psychotherapy. Data from 875…

Characteristics of liver fibrosis with different etiologies using a fully quantitative fibrosis assessment tool.

PubMed

Wu, Q; Zhao, X; You, H

2017-05-18

This study aimed to test the diagnostic performance of a fully quantitative fibrosis assessment tool for liver fibrosis in patients with chronic hepatitis B (CHB), primary biliary cirrhosis (PBC) and non-alcoholic steatohepatitis (NASH). A total of 117 patients with liver fibrosis were included in this study, including 50 patients with CHB, 49 patients with PBC and 18 patients with NASH. All patients underwent liver biopsy (LB). Fibrosis stages were assessed by two experienced pathologists. Histopathological images of LB slices were processed by second harmonic generation (SHG)/two-photon excited fluorescence (TPEF) microscopy without staining, a system called qFibrosis (quantitative fibrosis) system. Altogether 101 quantitative features of the SHG/TPEF images were acquired. The parameters of aggregated collagen in portal, septal and fibrillar areas increased significantly with stages of liver fibrosis in PBC and CHB (P<0.05), but the same was not found for parameters of distributed collagen (P>0.05). There was a significant correlation between parameters of aggregated collagen in portal, septal and fibrillar areas and stages of liver fibrosis from CHB and PBC (P<0.05), but no correlation was found between the distributed collagen parameters and the stages of liver fibrosis from those patients (P>0.05). There was no significant correlation between NASH parameters and stages of fibrosis (P>0.05). For CHB and PBC patients, the highest correlation was between septal parameters and fibrosis stages, the second highest was between portal parameters and fibrosis stages and the lowest correlation was between fibrillar parameters and fibrosis stages. The correlation between the septal parameters of the PBC and stages is significantly higher than the parameters of the other two areas (P<0.05). The qFibrosis candidate parameters based on CHB were also applicable for quantitative analysis of liver fibrosis in PBC patients. Different parameters should be selected for liver fibrosis assessment in different stages of PBC compared with CHB.

Characteristics of liver fibrosis with different etiologies using a fully quantitative fibrosis assessment tool

PubMed Central

Wu, Q.; Zhao, X.; You, H.

2017-01-01

This study aimed to test the diagnostic performance of a fully quantitative fibrosis assessment tool for liver fibrosis in patients with chronic hepatitis B (CHB), primary biliary cirrhosis (PBC) and non-alcoholic steatohepatitis (NASH). A total of 117 patients with liver fibrosis were included in this study, including 50 patients with CHB, 49 patients with PBC and 18 patients with NASH. All patients underwent liver biopsy (LB). Fibrosis stages were assessed by two experienced pathologists. Histopathological images of LB slices were processed by second harmonic generation (SHG)/two-photon excited fluorescence (TPEF) microscopy without staining, a system called qFibrosis (quantitative fibrosis) system. Altogether 101 quantitative features of the SHG/TPEF images were acquired. The parameters of aggregated collagen in portal, septal and fibrillar areas increased significantly with stages of liver fibrosis in PBC and CHB (P<0.05), but the same was not found for parameters of distributed collagen (P>0.05). There was a significant correlation between parameters of aggregated collagen in portal, septal and fibrillar areas and stages of liver fibrosis from CHB and PBC (P<0.05), but no correlation was found between the distributed collagen parameters and the stages of liver fibrosis from those patients (P>0.05). There was no significant correlation between NASH parameters and stages of fibrosis (P>0.05). For CHB and PBC patients, the highest correlation was between septal parameters and fibrosis stages, the second highest was between portal parameters and fibrosis stages and the lowest correlation was between fibrillar parameters and fibrosis stages. The correlation between the septal parameters of the PBC and stages is significantly higher than the parameters of the other two areas (P<0.05). The qFibrosis candidate parameters based on CHB were also applicable for quantitative analysis of liver fibrosis in PBC patients. Different parameters should be selected for liver fibrosis assessment in different stages of PBC compared with CHB. PMID:28538834

Effects of population succession on demographic and genetic processes: predictions and tests in the daylily Hemerocallis thunbergii (Liliaceae).

PubMed

Chung, Mi Yoon; Nason, John D; Chung, Myong Gi

2007-07-01

Spatial genetic structure within plant populations is influenced by variation in demographic processes through space and time, including a population's successional status. To determine how demographic structure and fine-scale genetic structure (FSGS) change with stages in a population's successional history, we studied Hemerocallis thunbergii (Liliaceae), a nocturnal flowering and hawkmoth-pollinated herbaceous perennial with rapid population turnover dynamics. We examined nine populations assigned to three successive stages of population succession: expansion, maturation, and senescence. We developed stage-specific expectations for within-population demographic and genetic structure, and then for each population quantified the spatial aggregation of individuals and genotypes using spatial autocorrelation methods (nonaccumulative O-ring and kinship statistics, respectively), and at the landscape level measured inbreeding and genetic structure using Wright's F-statistics. Analyses using the O-ring statistic revealed significant aggregation of individuals at short spatial scales in expanding and senescing populations, in particular, which may reflect restricted seed dispersal around maternal individuals combined with relatively low local population densities at these stages. Significant FSGS was found for three of four expanding, no mature, and only one senescing population, a pattern generally consistent with expectations of successional processes. Although allozyme genetic diversity was high within populations (mean %P = 78.9 and H(E) = 0.281), landscape-level differentiation among sites was also high (F(ST) = 0.166) and all populations exhibited a significant deficit of heterozygotes relative to Hardy-Weinberg expectations (range F = 0.201-0.424, mean F(IS) = 0.321). Within populations, F was not correlated with the degree of FSGS, thus suggesting inbreeding due primarily to selfing as opposed to mating among close relatives in spatially structured populations. Our results demonstrate considerable variation in the spatial distribution of individuals and patterns and magnitude of FSGS in H. thunbergii populations across the landscape. This variation is generally consistent with succession-stage-specific differences in ecological processes operating within these populations.

Thermodynamic performance of multi-stage gradational lead screw vacuum pump

NASA Astrophysics Data System (ADS)

Zhao, Fan; Zhang, Shiwei; Sun, Kun; Zhang, Zhijun

2018-02-01

As a kind of dry mechanical vacuum pump, the twin-screw vacuum pump has an outstanding pumping performance during operation, widely used in the semiconductor industry. Compared with the constant lead screw (CLS) vacuum pump, the gradational lead screw (GLS) vacuum pump is more popularly applied in recent years. Nevertheless, not many comparative studies on the thermodynamic performance of GLS vacuum pump can be found in the literature. Our study focuses on one type of GLS vacuum pump, the multi-stage gradational lead screw (MGLS) vacuum pump, gives a detailed description of its construction and illustrates it with the drawing. Based on the structural analysis, the thermodynamic procedure is divided into four distinctive processes, including sucking process, transferring (compressing) process, backlashing process and exhausting process. The internal mechanism of each process is qualitatively illustrated and the mathematical expressions of seven thermodynamic parameters are given under the ideal situation. The performance curves of MGLS vacuum pump are plotted by MATLAB software and compared with those of the CLS vacuum pump in the same case. The results can well explain why the MGLS vacuum pump has more favorable pumping performance than the CLS vacuum pump in saving energy, reducing noise and heat dissipation.

Review of enhanced processes for anaerobic digestion treatment of sewage sludge

NASA Astrophysics Data System (ADS)

Liu, Xinyuan; Han, Zeyu; Yang, Jie; Ye, Tianyi; Yang, Fang; Wu, Nan; Bao, Zhenbo

2018-02-01

Great amount of sewage sludge had been produced each year, which led to serious environmental pollution. Many new technologies had been developed recently, but they were hard to be applied in large scales. As one of the traditional technologies, anaerobic fermentation process was capable of obtaining bioenergy by biogas production under the functions of microbes. However, the anaerobic process is facing new challenges due to the low fermentation efficiency caused by the characteristics of sewage sludge itself. In order to improve the energy yield, the enhancement technologies including sewage sludge pretreatment process, co-digestion process, high-solid digestion process and two-stage fermentation process were widely studied in the literatures, which were introduced in this article.

Implementing a framework for goal setting in community based stroke rehabilitation: a process evaluation.

PubMed

Scobbie, Lesley; McLean, Donald; Dixon, Diane; Duncan, Edward; Wyke, Sally

2013-05-24

Goal setting is considered 'best practice' in stroke rehabilitation; however, there is no consensus regarding the key components of goal setting interventions or how they should be optimally delivered in practice. We developed a theory-based goal setting and action planning framework (G-AP) to guide goal setting practice. G-AP has 4 stages: goal negotiation, goal setting, action planning & coping planning and appraisal & feedback. All stages are recorded in a patient-held record. In this study we examined the implementation, acceptability and perceived benefits of G-AP in one community rehabilitation team with people recovering from stroke. G-AP was implemented for 6 months with 23 stroke patients. In-depth interviews with 8 patients and 8 health professionals were analysed thematically to investigate views of its implementation, acceptability and perceived benefits. Case notes of interviewed patients were analysed descriptively to assess the fidelity of G-AP implementation. G-AP was mostly implemented according to protocol with deviations noted at the planning and appraisal and feedback stages. Each stage was felt to make a useful contribution to the overall process; however, in practice, goal negotiation and goal setting merged into one stage and the appraisal and feedback stage included an explicit decision making component. Only two issues were raised regarding G-APs acceptability: (i) health professionals were concerned about the impact of goal non-attainment on patient's well-being (patients did not share their concerns), and (ii) some patients and health professionals found the patient-held record unhelpful. G-AP was felt to have a positive impact on patient goal attainment and professional goal setting practice. Collaborative partnerships between health professionals and patients were apparent throughout the process. G-AP has been perceived as both beneficial and broadly acceptable in one community rehabilitation team; however, implementation of novel aspects of the framework was inconsistent. The regulatory function of goal non-attainment and the importance of creating flexible partnerships with patients have been highlighted. Further development of the G-AP framework, training package and patient held record is required to address the specific issues highlighted by this process evaluation. Further evaluation of G-AP is required across diverse community rehabilitation settings.

GPU Acceleration of DSP for Communication Receivers.

PubMed

Gunther, Jake; Gunther, Hyrum; Moon, Todd

2017-09-01

Graphics processing unit (GPU) implementations of signal processing algorithms can outperform CPU-based implementations. This paper describes the GPU implementation of several algorithms encountered in a wide range of high-data rate communication receivers including filters, multirate filters, numerically controlled oscillators, and multi-stage digital down converters. These structures are tested by processing the 20 MHz wide FM radio band (88-108 MHz). Two receiver structures are explored: a single channel receiver and a filter bank channelizer. Both run in real time on NVIDIA GeForce GTX 1080 graphics card.

Materials Characterization of Additively Manufactured Components for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Carter, Robert; Draper, Susan; Locci, Ivan; Lerch, Bradley; Ellis, David; Senick, Paul; Meyer, Michael; Free, James; Cooper, Ken; Jones, Zachary

2015-01-01

To advance Additive Manufacturing (AM) technologies for production of rocket propulsion components the NASA Glenn Research Center (GRC) is applying state of the art characterization techniques to interrogate microstructure and mechanical properties of AM materials and components at various steps in their processing. The materials being investigated for upper stage rocket engines include titanium, copper, and nickel alloys. Additive manufacturing processes include laser powder bed, electron beam powder bed, and electron beam wire fed processes. Various post build thermal treatments, including Hot Isostatic Pressure (HIP), have been studied to understand their influence on microstructure, mechanical properties, and build density. Micro-computed tomography, electron microscopy, and mechanical testing in relevant temperature environments has been performed to develop relationships between build quality, microstructure, and mechanical performance at temperature. A summary of GRC's Additive Manufacturing roles and experimental findings will be presented.

Material Characterization of Additively Manufactured Components for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Carter, Robert; Draper, Susan; Locci, Ivan; Lerch, Bradley; Ellis, David; Senick, Paul; Meyer, Michael; Free, James; Cooper, Ken; Jones, Zachary

2015-01-01

To advance Additive Manufacturing (AM) technologies for production of rocket propulsion components the NASA Glenn Research Center (GRC) is applying state of the art characterization techniques to interrogate microstructure and mechanical properties of AM materials and components at various steps in their processing. The materials being investigated for upper stage rocket engines include titanium, copper, and nickel alloys. Additive manufacturing processes include laser powder bed, electron beam powder bed, and electron beam wire fed processes. Various post build thermal treatments, including Hot Isostatic Pressure (HIP), have been studied to understand their influence on microstructure, mechanical properties, and build density. Micro-computed tomography, electron microscopy, and mechanical testing in relevant temperature environments has been performed to develop relationships between build quality, microstructure, and mechanical performance at temperature. A summary of GRCs Additive Manufacturing roles and experimental findings will be presented.

Modeling heart rate variability including the effect of sleep stages

NASA Astrophysics Data System (ADS)

Soliński, Mateusz; Gierałtowski, Jan; Żebrowski, Jan

2016-02-01

We propose a model for heart rate variability (HRV) of a healthy individual during sleep with the assumption that the heart rate variability is predominantly a random process. Autonomic nervous system activity has different properties during different sleep stages, and this affects many physiological systems including the cardiovascular system. Different properties of HRV can be observed during each particular sleep stage. We believe that taking into account the sleep architecture is crucial for modeling the human nighttime HRV. The stochastic model of HRV introduced by Kantelhardt et al. was used as the initial starting point. We studied the statistical properties of sleep in healthy adults, analyzing 30 polysomnographic recordings, which provided realistic information about sleep architecture. Next, we generated synthetic hypnograms and included them in the modeling of nighttime RR interval series. The results of standard HRV linear analysis and of nonlinear analysis (Shannon entropy, Poincaré plots, and multiscale multifractal analysis) show that—in comparison with real data—the HRV signals obtained from our model have very similar properties, in particular including the multifractal characteristics at different time scales. The model described in this paper is discussed in the context of normal sleep. However, its construction is such that it should allow to model heart rate variability in sleep disorders. This possibility is briefly discussed.

Design of high reliability organizations in health care.

PubMed

Carroll, J S; Rudolph, J W

2006-12-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

Towards multi-field D-brane inflation in a warped throat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Heng-Yu; Gong, Jinn-Ouk; Koyama, Kazuya

2010-11-01

We study the inflationary dynamics in a model of slow-roll inflation in warped throat. Inflation is realized by the motion of a D-brane along the radial direction of the throat, and at later stages instabilities develop in the angular directions. We closely investigate both the single field potential relevant for the slow-roll phase, and the full multi-field one including the angular modes which becomes important at later stages. We study the main features of the instability process, discussing its possible consequences and identifying the vacua towards which the angular modes are driven.

InSight Atlas V Centaur Stage Prep for Transport

NASA Image and Video Library

2018-02-27

At Vandenberg Air Force Base in California, a cover is installed on a Centaur upper stage in preparation for its transport to Space Launch Complex 3. The Centaur will be mounted atop a United Launch Alliance Atlas V rocket to boost NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, or InSight, mission to land on Mars. InSight is the first mission to explore the Red Planet's deep interior. It will investigate processes that shaped the rocky planets of the inner solar system including Earth. Liftoff is scheduled for May 5, 2018.

Temporary stages and motivational variables: Two complementary perspectives in the help-seeking process for mental disorders.

PubMed

Del Valle Del Valle, Gema; Carrió, Carmen; Belloch, Amparo

2017-10-09

Help-seeking for mental disorders is a complex process, which includes different temporary stages, and in which the motivational variables play an especially relevant role. However, there is a lack of instruments to evaluate in depth both the temporary and motivational variables involved in the help-seeking process. This study aims to analyse in detail these two sets of variables, using a specific instrument designed for the purpose, to gain a better understanding of the process of treatment seeking. A total of 152 patients seeking treatment in mental health outpatient clinics of the NHS were individually interviewed: 71 had Obsessive-Compulsive Disorder, 21 had Agoraphobia, 18 had Major Depressive Disorder), 20 had Anorexia Nervosa, and 22 had Cocaine Dependence. The patients completed a structured interview assessing the help-seeking process. Disorder severity and quality of life was also assessed. The patients with agoraphobia and with major depression took significantly less time in recognising their mental health symptoms. Similarly, patients with major depression were faster in seeking professional help. Motivational variables were grouped in 3 sets: motivators for seeking treatment, related to the negative impact of symptoms on mood and to loss of control over symptoms; motivators for delaying treatment, related to minimisation of the disorder; and stigma-associated variables. The results support the importance of considering the different motivational variables involved in the several stages of the help-seeking process. The interview designed to that end has shown its usefulness in this endeavour. Copyright © 2017 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

[The clinical and microbiological characteristics of oropharyngeal candidiasis in the HIV-infected patients at the late stages of the disease].

PubMed

Charushin, A O; Elovikov, A M; Charushina, I P; Vorob'eva, N N; Katretskaya, G G

Oropharyngeal candidiasis in 512 HIV-infected patients at the late stages of the disease was studied with special reference to the clinical and microbiological characteristics of this condition. The diagnosis was established based on the results of the clinical and microbiological examination of the patients including investigation of the tissue samples taken from the oral cavity and the throat with the use of the device specially developed for this purpose. It was shown that the disease existed in various clinical forms the most common of which were monocomponent pathology represented by pseudomembranous candidiasis in 37.5±2.14% of the patients, the two-component mixed form (pseudomembranous candidiasis with concomitant angular chelitis) diagnosed in 27.5±1.97% cases, and the ternary form (the combination of pseudomembranous candidiasis, acute atrophic process, and angular chelitis) documented in 11.9±1.43% patients. The main clinical features of the disease included the combination of its various forms, multiple localization of the pathological process, and its polymorphous manifestations. Changes in the clinical course of oropharyngeal candidiasis associated with the progression of HIV from the 4A to the 4B stage were detected for the first time. They were shown to be accompanied by variations in the species composition and concentration of fungal flora in the crypts of the palatine tonsils and its sensitivity to fluconazole therapy.

Effective System for Automatic Bundle Block Adjustment and Ortho Image Generation from Multi Sensor Satellite Imagery

NASA Astrophysics Data System (ADS)

Akilan, A.; Nagasubramanian, V.; Chaudhry, A.; Reddy, D. Rajesh; Sudheer Reddy, D.; Usha Devi, R.; Tirupati, T.; Radhadevi, P. V.; Varadan, G.

2014-11-01

Block Adjustment is a technique for large area mapping for images obtained from different remote sensingsatellites.The challenge in this process is to handle huge number of satellite imageries from different sources with different resolution and accuracies at the system level. This paper explains a system with various tools and techniques to effectively handle the end-to-end chain in large area mapping and production with good level of automation and the provisions for intuitive analysis of final results in 3D and 2D environment. In addition, the interface for using open source ortho and DEM references viz., ETM, SRTM etc. and displaying ESRI shapes for the image foot-prints are explained. Rigorous theory, mathematical modelling, workflow automation and sophisticated software engineering tools are included to ensure high photogrammetric accuracy and productivity. Major building blocks like Georeferencing, Geo-capturing and Geo-Modelling tools included in the block adjustment solution are explained in this paper. To provide optimal bundle block adjustment solution with high precision results, the system has been optimized in many stages to exploit the full utilization of hardware resources. The robustness of the system is ensured by handling failure in automatic procedure and saving the process state in every stage for subsequent restoration from the point of interruption. The results obtained from various stages of the system are presented in the paper.

Cleaner Production of Ti Powder by a Two-Stage Aluminothermic Reduction Process

NASA Astrophysics Data System (ADS)

Zhao, Kun; Wang, Yaowu; Feng, Naixiang

2017-10-01

A two-stage aluminothermic reduction process for preparing Ti powder under vacuum conditions using Na2TiF6 was investigated. An Al-Ti master alloy and a clean cryolite were simultaneously obtained as co-products. The first-stage reduction was an exothermic process that occurred at approximately 660°C. The Al and O contents of the Ti powder product were 0.18 wt.% and 0.35 wt.%, respectively, with an average particle size <74 μm. Ti(IV), Ti(III), and metallic Ti were present in the Ti-containing cryolite produced by the first-stage reduction, at a total content of approximately 3.13 wt.%. After second-stage reduction, the Ti elemental contents of the clean cryolite were reduced to 0.002 wt.%. The Al-Ti master alloy obtained by second-stage reduction was composed of Al and TiAl3. The mechanisms involved in these reduction processes were also examined.

Preferential processing of self-relevant stimuli occurs mainly at the perceptual and conscious stages of information processing.

PubMed

Tacikowski, P; Ehrsson, H H

2016-04-01

Self-related stimuli, such as one's own name or face, are processed faster and more accurately than other types of stimuli. However, what remains unknown is at which stage of the information processing hierarchy this preferential processing occurs. Our first aim was to determine whether preferential self-processing involves mainly perceptual stages or also post-perceptual stages. We found that self-related priming was stronger than other-related priming only because of perceptual prime-target congruency. Our second aim was to dissociate the role of conscious and unconscious factors in preferential self-processing. To this end, we compared the "self" and "other" conditions in trials where primes were masked or unmasked. In two separate experiments, we found that self-related priming was stronger than other-related priming but only in the unmasked trials. Together, our results suggest that preferential access to the self-concept occurs mainly at the perceptual and conscious stages of the stimulus processing hierarchy. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

[Influence of different processing methods and mature stages on 3,29-dibenzoyl rarounitriol of Trichosanthes kirilowii seeds].

PubMed

Liu, Jin-Na; Xie, Xiao-Liang; Yang, Tai-Xin; Zhang, Cun-Li; Jia, Dong-Sheng; Liu, Ming; Wen, Chun-Xiu

2014-04-01

To study the different mature stages and the best processing methods on the quality of Trichosanthes kirilowii seeds. The content of 3,29-dibenzoyl rarounitriol in Trichosanthes kirilowii seeds was determined by HPLC. The sample of different mature stages such as immature, near mature and fully mature and processed by different methods were studied. Fully mature Trichosanthes kirilowii seeds were better than the immatured, and the best processing method was dried under 60degrees C, the content of 3,29-dibenzoyl rarounitriol reached up to 131.63microlg/mL. Different processing methods and different mature stages had a significant influence on the quality of Trichosanthes kirilowii seeds.

An Agenda for Research on the Sustainability of Public Health Programs

PubMed Central

Dearing, James W.

2011-01-01

Funders of programs in public health and community health are increasingly concerned about the sustainability of changes they initiate. Despite a recent increase in sustainability research and evaluation, this literature has not developed a widely used paradigm for conducting research that can accumulate into generalizable findings. We provide guidance for research and evaluation of health program sustainability, including definitions and types of sustainability, specifications and measurements of dependent variables, definitions of independent variables or factors that influence sustainability, and suggestions for designs for research and data collection. We suggest viewing sustainability research as a further stage in the translation or dissemination of research-based interventions into practice. This perspective emphasizes ongoing relationships with earlier stages of a broader diffusion framework, including adoption and implementation processes. PMID:21940916

Computational Fluid Dynamics (CFD) applications in rocket propulsion analysis and design

NASA Technical Reports Server (NTRS)

Mcconnaughey, P. K.; Garcia, R.; Griffin, L. W.; Ruf, J. H.

1993-01-01

Computational Fluid Dynamics (CFD) has been used in recent applications to affect subcomponent designs in liquid propulsion rocket engines. This paper elucidates three such applications for turbine stage, pump stage, and combustor chamber geometries. Details of these applications include the development of a high turning airfoil for a gas generator (GG) powered, liquid oxygen (LOX) turbopump, single-stage turbine using CFD as an integral part of the design process. CFD application to pump stage design has emphasized analysis of inducers, impellers, and diffuser/volute sections. Improvements in pump stage impeller discharge flow uniformity have been seen through CFD optimization on coarse grid models. In the area of combustor design, recent CFD analysis of a film cooled ablating combustion chamber has been used to quantify the interaction between film cooling rate, chamber wall contraction angle, and geometry and their effects of these quantities on local wall temperature. The results are currently guiding combustion chamber design and coolant flow rate for an upcoming subcomponent test. Critical aspects of successful integration of CFD into the design cycle includes a close-coupling of CFD and design organizations, quick turnaround of parametric analyses once a baseline CFD benchmark has been established, and the use of CFD methodology and approaches that address pertinent design issues. In this latter area, some problem details can be simplified while retaining key physical aspects to maintain analytical integrity.

Feature ranking and rank aggregation for automatic sleep stage classification: a comparative study.

PubMed

Najdi, Shirin; Gharbali, Ali Abdollahi; Fonseca, José Manuel

2017-08-18

Nowadays, sleep quality is one of the most important measures of healthy life, especially considering the huge number of sleep-related disorders. Identifying sleep stages using polysomnographic (PSG) signals is the traditional way of assessing sleep quality. However, the manual process of sleep stage classification is time-consuming, subjective and costly. Therefore, in order to improve the accuracy and efficiency of the sleep stage classification, researchers have been trying to develop automatic classification algorithms. Automatic sleep stage classification mainly consists of three steps: pre-processing, feature extraction and classification. Since classification accuracy is deeply affected by the extracted features, a poor feature vector will adversely affect the classifier and eventually lead to low classification accuracy. Therefore, special attention should be given to the feature extraction and selection process. In this paper the performance of seven feature selection methods, as well as two feature rank aggregation methods, were compared. Pz-Oz EEG, horizontal EOG and submental chin EMG recordings of 22 healthy males and females were used. A comprehensive feature set including 49 features was extracted from these recordings. The extracted features are among the most common and effective features used in sleep stage classification from temporal, spectral, entropy-based and nonlinear categories. The feature selection methods were evaluated and compared using three criteria: classification accuracy, stability, and similarity. Simulation results show that MRMR-MID achieves the highest classification performance while Fisher method provides the most stable ranking. In our simulations, the performance of the aggregation methods was in the average level, although they are known to generate more stable results and better accuracy. The Borda and RRA rank aggregation methods could not outperform significantly the conventional feature ranking methods. Among conventional methods, some of them slightly performed better than others, although the choice of a suitable technique is dependent on the computational complexity and accuracy requirements of the user.

Generalized model for k -core percolation and interdependent networks

NASA Astrophysics Data System (ADS)

Panduranga, Nagendra K.; Gao, Jianxi; Yuan, Xin; Stanley, H. Eugene; Havlin, Shlomo

2017-09-01

Cascading failures in complex systems have been studied extensively using two different models: k -core percolation and interdependent networks. We combine the two models into a general model, solve it analytically, and validate our theoretical results through extensive simulations. We also study the complete phase diagram of the percolation transition as we tune the average local k -core threshold and the coupling between networks. We find that the phase diagram of the combined processes is very rich and includes novel features that do not appear in the models studying each of the processes separately. For example, the phase diagram consists of first- and second-order transition regions separated by two tricritical lines that merge and enclose a two-stage transition region. In the two-stage transition, the size of the giant component undergoes a first-order jump at a certain occupation probability followed by a continuous second-order transition at a lower occupation probability. Furthermore, at certain fixed interdependencies, the percolation transition changes from first-order → second-order → two-stage → first-order as the k -core threshold is increased. The analytic equations describing the phase boundaries of the two-stage transition region are set up, and the critical exponents for each type of transition are derived analytically.

Utilizing individual fish biomass and relative abundance models to map environmental niche associations of adult and juvenile targeted fishes.

PubMed

Galaiduk, Ronen; Radford, Ben T; Harvey, Euan S

2018-06-21

Many fishes undergo ontogenetic habitat shifts to meet their energy and resource needs as they grow. Habitat resource partitioning and patterns of habitat connectivity between conspecific fishes at different life-history stages is a significant knowledge gap. Species distribution models were used to examine patterns in the relative abundance, individual biomass estimates and environmental niche associations of different life stages of three iconic West Australian fishes. Continuous predictive maps describing the spatial distribution of abundance and individual biomass of the study species were created as well predictive hotspot maps that identify possible areas for aggregation of individuals of similar life stages of multiple species (i.e. spawning grounds, fisheries refugia or nursery areas). The models and maps indicate that processes driving the abundance patterns could be different from the body size associated demographic processes throughout an individual's life cycle. Incorporating life-history in the spatially explicit management plans can ensure that critical habitat of the vulnerable stages (e.g. juvenile fish, spawning stock) is included within proposed protected areas and can enhance connectivity between various functional areas (e.g. nursery areas and adult populations) which, in turn, can improve the abundance of targeted species as well as other fish species relying on healthy ecosystem functioning.

Processes and Stages of Differentiation in European Higher Education

ERIC Educational Resources Information Center

Goglio, Valentina; Regini, Marino

2017-01-01

In this article we discuss processes of internal differentiation that have characterised European higher education systems in the last 50 years. We argue that these processes have gone through two main stages and in two different directions, each of which is showing its limits in the long run. Therefore, we expect a third stage of differentiation,…

Co-processing of carbonaceous solids and petroleum oil

DOEpatents

Gupta, Avinash; Greene, Marvin I.

1992-01-01

In a process for producing distillates from coal by a first stage thermal liquefaction followed by a catalytic hydrogenation, liquefaction solvent is added at points spaced over the length of the thermal liquefaction heater. Coal may be co-processed with petroleum oil by adding pre-hydrogenated oil to the first stage or unhydrogenated oil to the second stage.

A rule-based automatic sleep staging method.

PubMed

Liang, Sheng-Fu; Kuo, Chin-En; Hu, Yu-Han; Cheng, Yu-Shian

2012-03-30

In this paper, a rule-based automatic sleep staging method was proposed. Twelve features including temporal and spectrum analyses of the EEG, EOG, and EMG signals were utilized. Normalization was applied to each feature to eliminating individual differences. A hierarchical decision tree with fourteen rules was constructed for sleep stage classification. Finally, a smoothing process considering the temporal contextual information was applied for the continuity. The overall agreement and kappa coefficient of the proposed method applied to the all night polysomnography (PSG) of seventeen healthy subjects compared with the manual scorings by R&K rules can reach 86.68% and 0.79, respectively. This method can integrate with portable PSG system for sleep evaluation at-home in the near future. Copyright © 2012 Elsevier B.V. All rights reserved.

Adolescent Experiences with the Vaginal Ring

PubMed Central

Epstein, Laura B.; Sokal-Gutierrez, Karen; Ivey, Susan L.; Raine, Tina; Auerswald, Colette

2011-01-01

Purpose To understand racial/ethnic minority adolescent females’ experiences with the vaginal ring. Methods We conducted in-depth interviews with a clinic-based sample of 32 young women aged 15–24 years who had used the vaginal ring. Results Qualitative analysis using grounded theory revealed that adolescents undergo a multi-stage process when trying the ring and adopting ring use. These stages include hearing about the ring, initial reactions, first experiences with insertion and removal, and first sexual experiences. Adolescents subsequently enter an assessment and adjustment stage in which they decide whether to adopt or discontinue ring use. Ultimately they share their experiences with friends. Conclusions The model developed provides a context within which providers may advise adolescents as they begin use of the ring. Some specific recommendations are offered. PMID:18565439

The common transcriptional subnetworks of the grape berry skin in the late stages of ripening.

PubMed

Ghan, Ryan; Petereit, Juli; Tillett, Richard L; Schlauch, Karen A; Toubiana, David; Fait, Aaron; Cramer, Grant R

2017-05-30

Wine grapes are important economically in many countries around the world. Defining the optimum time for grape harvest is a major challenge to the grower and winemaker. Berry skins are an important source of flavor, color and other quality traits in the ripening stage. Senescent-like processes such as chloroplast disorganization and cell death characterize the late ripening stage. To better understand the molecular and physiological processes involved in the late stages of berry ripening, RNA-seq analysis of the skins of seven wine grape cultivars (Cabernet Franc, Cabernet Sauvignon, Merlot, Pinot Noir, Chardonnay, Sauvignon Blanc and Semillon) was performed. RNA-seq analysis identified approximately 2000 common differentially expressed genes for all seven cultivars across four different berry sugar levels (20 to 26 °Brix). Network analyses, both a posteriori (standard) and a priori (gene co-expression network analysis), were used to elucidate transcriptional subnetworks and hub genes associated with traits in the berry skins of the late stages of berry ripening. These independent approaches revealed genes involved in photosynthesis, catabolism, and nucleotide metabolism. The transcript abundance of most photosynthetic genes declined with increasing sugar levels in the berries. The transcript abundance of other processes increased such as nucleic acid metabolism, chromosome organization and lipid catabolism. Weighted gene co-expression network analysis (WGCNA) identified 64 gene modules that were organized into 12 subnetworks of three modules or more and six higher order gene subnetworks. Some gene subnetworks were highly correlated with sugar levels and some subnetworks were highly enriched in the chloroplast and nucleus. The petal R package was utilized independently to construct a true small-world and scale-free complex gene co-expression network model. A subnetwork of 216 genes with the highest connectivity was elucidated, consistent with the module results from WGCNA. Hub genes in these subnetworks were identified including numerous members of the core circadian clock, RNA splicing, proteolysis and chromosome organization. An integrated model was constructed linking light sensing with alternative splicing, chromosome remodeling and the circadian clock. A common set of differentially expressed genes and gene subnetworks from seven different cultivars were examined in the skin of the late stages of grapevine berry ripening. A densely connected gene subnetwork was elucidated involving a complex interaction of berry senescent processes (autophagy), catabolism, the circadian clock, RNA splicing, proteolysis and epigenetic regulation. Hypotheses were induced from these data sets involving sugar accumulation, light, autophagy, epigenetic regulation, and fruit development. This work provides a better understanding of berry development and the transcriptional processes involved in the late stages of ripening.

The Effect of Aging on the Stages of Processing in a Choice Reaction Time Task

ERIC Educational Resources Information Center

Simon, J. Richard; Pouraghabagher, A. Reza

1978-01-01

Two experiments were conducted to determine the effect of aging on encoding and response selection stages of a choice reaction time task. Results suggested reducing stimulus discriminability may affect information processing prior to the encoding stage, but the encoding stage is the primary locus of the slowing which accompanied aging. (Author)

[Fibroblast growth factors and their effects in pancreas organogenesis].

PubMed

Gnatenko, D A; Kopantzev, E P; Sverdlov, E D

2017-05-01

Fibroblast growth factors (FGF) - growth factors that regulate many important biological processes, including proliferation and differentiation of embryonic cells during organogenesis. In this review, we will summarize current information about the involvement of FGFs in the pancreas organogenesis. Pancreas organogenesis is a complex process, which involves constant signaling from mesenchymal tissue. This orchestrates the activation of various regulator genes at specific stages, determining the specification of progenitor cells. Alterations in FGF/FGFR signaling pathway during this process lead to incorrect activation of the master genes, which leads to different pathologies during pancreas development. Understanding the full picture about role of FGF factors in pancreas development will make it possible to more accurately understand their role in other pathologies of this organ, including carcinogenesis.

Multi-stage volcanic island flank collapses with coeval explosive caldera-forming eruptions.

PubMed

Hunt, James E; Cassidy, Michael; Talling, Peter J

2018-01-18

Volcanic flank collapses and explosive eruptions are among the largest and most destructive processes on Earth. Events at Mount St. Helens in May 1980 demonstrated how a relatively small (<5 km 3 ) flank collapse on a terrestrial volcano could immediately precede a devastating eruption. The lateral collapse of volcanic island flanks, such as in the Canary Islands, can be far larger (>300 km 3 ), but can also occur in complex multiple stages. Here, we show that multistage retrogressive landslides on Tenerife triggered explosive caldera-forming eruptions, including the Diego Hernandez, Guajara and Ucanca caldera eruptions. Geochemical analyses were performed on volcanic glasses recovered from marine sedimentary deposits, called turbidites, associated with each individual stage of each multistage landslide. These analyses indicate only the lattermost stages of subaerial flank failure contain materials originating from respective coeval explosive eruption, suggesting that initial more voluminous submarine stages of multi-stage flank collapse induce these aforementioned explosive eruption. Furthermore, there are extended time lags identified between the individual stages of multi-stage collapse, and thus an extended time lag between the initial submarine stages of failure and the onset of subsequent explosive eruption. This time lag succeeding landslide-generated static decompression has implications for the response of magmatic systems to un-roofing and poses a significant implication for ocean island volcanism and civil emergency planning.

In search of how people change. Applications to addictive behaviors.

PubMed

Prochaska, J O; DiClemente, C C; Norcross, J C

1992-09-01

How people intentionally change addictive behaviors with and without treatment is not well understood by behavioral scientists. This article summarizes research on self-initiated and professionally facilitated change of addictive behaviors using the key trans-theoretical constructs of stages and processes of change. Modification of addictive behaviors involves progression through five stages--pre-contemplation, contemplation, preparation, action, and maintenance--and individuals typically recycle through these stages several times before termination of the addiction. Multiple studies provide strong support for these stages as well as for a finite and common set of change processes used to progress through the stages. Research to date supports a trans-theoretical model of change that systematically integrates the stages with processes of change from diverse theories of psychotherapy.

What makes us think? A three-stage dual-process model of analytic engagement.

PubMed

Pennycook, Gordon; Fugelsang, Jonathan A; Koehler, Derek J

2015-08-01

The distinction between intuitive and analytic thinking is common in psychology. However, while often being quite clear on the characteristics of the two processes ('Type 1' processes are fast, autonomous, intuitive, etc. and 'Type 2' processes are slow, deliberative, analytic, etc.), dual-process theorists have been heavily criticized for being unclear on the factors that determine when an individual will think analytically or rely on their intuition. We address this issue by introducing a three-stage model that elucidates the bottom-up factors that cause individuals to engage Type 2 processing. According to the model, multiple Type 1 processes may be cued by a stimulus (Stage 1), leading to the potential for conflict detection (Stage 2). If successful, conflict detection leads to Type 2 processing (Stage 3), which may take the form of rationalization (i.e., the Type 1 output is verified post hoc) or decoupling (i.e., the Type 1 output is falsified). We tested key aspects of the model using a novel base-rate task where stereotypes and base-rate probabilities cued the same (non-conflict problems) or different (conflict problems) responses about group membership. Our results support two key predictions derived from the model: (1) conflict detection and decoupling are dissociable sources of Type 2 processing and (2) conflict detection sometimes fails. We argue that considering the potential stages of reasoning allows us to distinguish early (conflict detection) and late (decoupling) sources of analytic thought. Errors may occur at both stages and, as a consequence, bias arises from both conflict monitoring and decoupling failures. Copyright © 2015 Elsevier Inc. All rights reserved.

Cultural adaptation and health literacy refinement of a brief depression intervention for Latinos in a low-resource setting.

PubMed

Ramos, Zorangelí; Alegría, Margarita

2014-04-01

Few studies addressing the mental health needs of Latinos describe how interventions are tailored or culturally adapted to address the needs of their target population. Without reference to this process, efforts to replicate results and provide working models of the adaptation process for other researchers are thwarted. The purpose of this article is to describe the process of a cultural adaptation that included accommodations for health literacy of a brief telephone cognitive-behavioral depression intervention for Latinos in low-resource settings. We followed a five-stage approach (i.e., information gathering, preliminary adaptation, preliminary testing, adaptation, and refinement) as described by Barrera, Castro, Strycker, and Toobert (2013) to structure our process. Cultural adaptations included condensation of the sessions, review, and modifications of materials presented to participants including the addition of visual aids, culturally relevant metaphors, values, and proverbs. Feedback from key stakeholders, including clinician and study participants, was fundamental to the adaptation process. Areas for further inquiry and adaptation identified in our process include revisions to the presentation of "cognitive restructuring" to participants and the inclusion of participant beliefs about the cause of their depression. Cultural adaptation is a dynamic process, requiring numerous refinements to ensure that an intervention is tailored and relevant to the target population.

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability.

PubMed

Liu, Tongjun; Williams, Daniel L; Pattathil, Sivakumar; Li, Muyang; Hahn, Michael G; Hodge, David B

2014-04-03

A two-stage chemical pretreatment of corn stover is investigated comprising an NaOH pre-extraction followed by an alkaline hydrogen peroxide (AHP) post-treatment. We propose that conventional one-stage AHP pretreatment can be improved using alkaline pre-extraction, which requires significantly less H2O2 and NaOH. To better understand the potential of this approach, this study investigates several components of this process including alkaline pre-extraction, alkaline and alkaline-oxidative post-treatment, fermentation, and the composition of alkali extracts. Mild NaOH pre-extraction of corn stover uses less than 0.1 g NaOH per g corn stover at 80°C. The resulting substrates were highly digestible by cellulolytic enzymes at relatively low enzyme loadings and had a strong susceptibility to drying-induced hydrolysis yield losses. Alkaline pre-extraction was highly selective for lignin removal over xylan removal; xylan removal was relatively minimal (~20%). During alkaline pre-extraction, up to 0.10 g of alkali was consumed per g of corn stover. AHP post-treatment at low oxidant loading (25 mg H2O2 per g pre-extracted biomass) increased glucose hydrolysis yields by 5%, which approached near-theoretical yields. ELISA screening of alkali pre-extraction liquors and the AHP post-treatment liquors demonstrated that xyloglucan and β-glucans likely remained tightly bound in the biomass whereas the majority of the soluble polymeric xylans were glucurono (arabino) xylans and potentially homoxylans. Pectic polysaccharides were depleted in the AHP post-treatment liquor relative to the alkaline pre-extraction liquor. Because the already-low inhibitor content was further decreased in the alkaline pre-extraction, the hydrolysates generated by this two-stage pretreatment were highly fermentable by Saccharomyces cerevisiae strains that were metabolically engineered and evolved for xylose fermentation. This work demonstrates that this two-stage pretreatment process is well suited for converting lignocellulose to fermentable sugars and biofuels, such as ethanol. This approach achieved high enzymatic sugars yields from pretreated corn stover using substantially lower oxidant loadings than have been reported previously in the literature. This pretreatment approach allows for many possible process configurations involving novel alkali recovery approaches and novel uses of alkaline pre-extraction liquors. Further work is required to identify the most economical configuration, including process designs using techno-economic analysis and investigating processing strategies that economize water use.

Development of water quality standards criteria. [for consumables (spacecrew supplies)

NASA Technical Reports Server (NTRS)

1976-01-01

Qualitative and semiquantitative analyses were made of volatile organic compounds in water supplies collected at various stages of processing in the space station prototype vacuum compression distillation unit to evaluate the process and the product water. Additional evaluation was made of specific ingredients required to adequately enhance the taste of the reclaimed water. A concept for the in-flight addition of these ingredients was developed. Revisions to previously recommended potable water criteria and specifications are included.

Lean Six Sigma Challenges and Opportunities

DTIC Science & Technology

2008-02-13

five key stages: Define, Measure, Analyze, Improve, and Control ( DMAIC ). During the ‘Define’ stage, participants identify the process that will be...that wastes time and effort. 4 The ‘Measure’ stage of DMAIC documents the measure of time or quantity of activities that occur at this stage of...chosen to be implemented. In the final ‘Control’ stage of the DMAIC methodology, the purpose is to ensure that benefits from the improved process

[Clinical Handling of Patients with Dissociative Disorders].

PubMed

Okano, Kenichiro

2015-01-01

This paper discusses the way informed psychiatrists are expected to handle dissociative patients in clinical situations, with a specific focus on dissociative identity disorders and dissociative fugue. On the initial interview with dissociative patients, information on their history of trauma and any nascent dissociative symptoms in their childhood should be carefully obtained. Their level of stress in their current life should also be assessed in order to understand their symptomatology, as well as to predict their future clinical course. A psychoeducational approach is crucial; it might be helpful to give information on dissociative disorder to these patients as well as their family members in order to promote their adherence to treatment. Regarding the symptomatology of dissociative disorders, detailed symptoms and the general clinical course are presented. It was stressed that dissociative identity disorder and dissociative fugue, the most high-profile dissociative disorders, are essentially different in their etiology and clinical presentation. Dissociative disorders are often confused with and misdiagnosed as psychotic disorders, such as schizophrenia. Other conditions considered in terms of the differential diagnosis include borderline personality disorder as well as temporal lobe epilepsy. Lastly, the therapeutic approach to dissociative identity disorder is discussed. Each dissociative identity should be understood as potentially representing some traumatically stressful event in the past. The therapist should be careful not to excessively promote the creation or elaboration of any dissociative identities. Three stages are proposed in the individual psychotherapeutic process. In the initial stage, a secure environment and stabilization of symptoms should be sought. The second stage consists of aiding the "host" personality to make use of other more adaptive coping skills in their life. The third stage involves coaching as well as continuous awareness of their comorbid psychiatric conditions. Lastly, factors preventing the patients' smooth recovery process are mentioned. They include their contact with past and current aggressors, chronic and ongoing stress within the family, including abuse and violence, and comorbid conditions such as depression and chronic medical conditions.

Defining process design space for monoclonal antibody cell culture.

PubMed

Abu-Absi, Susan Fugett; Yang, LiYing; Thompson, Patrick; Jiang, Canping; Kandula, Sunitha; Schilling, Bernhard; Shukla, Abhinav A

2010-08-15

The concept of design space has been taking root as a foundation of in-process control strategies for biopharmaceutical manufacturing processes. During mapping of the process design space, the multidimensional combination of operational variables is studied to quantify the impact on process performance in terms of productivity and product quality. An efficient methodology to map the design space for a monoclonal antibody cell culture process is described. A failure modes and effects analysis (FMEA) was used as the basis for the process characterization exercise. This was followed by an integrated study of the inoculum stage of the process which includes progressive shake flask and seed bioreactor steps. The operating conditions for the seed bioreactor were studied in an integrated fashion with the production bioreactor using a two stage design of experiments (DOE) methodology to enable optimization of operating conditions. A two level Resolution IV design was followed by a central composite design (CCD). These experiments enabled identification of the edge of failure and classification of the operational parameters as non-key, key or critical. In addition, the models generated from the data provide further insight into balancing productivity of the cell culture process with product quality considerations. Finally, process and product-related impurity clearance was evaluated by studies linking the upstream process with downstream purification. Production bioreactor parameters that directly influence antibody charge variants and glycosylation in CHO systems were identified.

Modelling of Two-Stage Methane Digestion With Pretreatment of Biomass

NASA Astrophysics Data System (ADS)

Dychko, A.; Remez, N.; Opolinskyi, I.; Kraychuk, S.; Ostapchuk, N.; Yevtieieva, L.

2018-04-01

Systems of anaerobic digestion should be used for processing of organic waste. Managing the process of anaerobic recycling of organic waste requires reliable predicting of biogas production. Development of mathematical model of process of organic waste digestion allows determining the rate of biogas output at the two-stage process of anaerobic digestion considering the first stage. Verification of Konto's model, based on the studied anaerobic processing of organic waste, is implemented. The dependencies of biogas output and its rate from time are set and may be used to predict the process of anaerobic processing of organic waste.

Insulation Cork Boards-Environmental Life Cycle Assessment of an Organic Construction Material.

PubMed

Silvestre, José D; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D; Durão, Vera

2016-05-20

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A "cradle-to-cradle" environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows ( i.e. , uptakes and emissions), including sensitivity analysis of this procedure; at the production stage-the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation-the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date "cradle-to-cradle" environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards.

Responses to salinity stress in bivalves: Evidence of ontogenetic changes in energetic physiology on Cerastoderma edule.

PubMed

Peteiro, Laura G; Woodin, Sarah A; Wethey, David S; Costas-Costas, Damian; Martínez-Casal, Arantxa; Olabarria, Celia; Vázquez, Elsa

2018-05-29

Estuarine bivalves are especially susceptible to salinity fluctuations. Stage-specific sensibilities may influence the structure and spatial distribution of the populations. Here we investigate differences on the energetic strategy of thread drifters (3-4 mm) and sedentary settlers (9-10 mm) of Cerastoderma edule over a wide range of salinities. Several physiological indicators (clearance, respiration and excretion rates, O:N) were measured during acute (2 days) and acclimated responses (7 days of exposure) for both size classes. Our results revealed a common lethal limit for both developmental stages (Salinity 15) but a larger physiological plasticity of thread drifters than sedentary settlers. Acclimation processes in drifters were initiated after 2 days of exposure and they achieved complete acclimation by day 7. Sedentary settlers delay acclimation and at day 7 feeding activity had not resumed and energetic losses through respiration and excretion were higher at the lowest salinity treatment. Different responses facing salinity stress might be related to differences in habitat of each stage. For sedentary settlers which occupy relatively stable niches, energy optimisation include delaying the initiation of the energetically expensive acclimation processes while drifters which occupy less stable environments require a more flexible process which allow them to optimize energy acquisition as fast as possible.

Forming characteristics of artificial aging Al-Mg-Si-Cu sheet alloys

NASA Astrophysics Data System (ADS)

Klos, Artur; Kellner, Sven; Wortberg, Daniel; Walter, Philipp; Bassi, Corrado; Merklein, Marion

2017-10-01

AA6111 is a commonly used aluminum alloy for body-in-white (BIW) components with good bake-hardening response, high strength and excellent formability. For industrial applications various process strategies are considered to reach strength of about 250 MPa in the final body part with that type of alloy. The purpose of this paper is to discuss recent process strategies of high-strength AA6111 sheets to evaluate the forming characteristics, precipitation kinetics dissolution and mechanical properties in the final condition. The forming behavior is investigated by four potential process chains after single-stage or multi-stage heat treatment including T4 (pre-aged at > 80 °C after quenching), T61 (T4 + artificial aged at 120-150 °C for 10-18 h), T6 (T4 + artificial aged at 180-220°C up to 12 h) and PFHT (T4 + post form heat treatment at 205°C for 30 min). The experimental input for characterization of the formability consists of tensile tests, bending tests and drawing tests. Differential Scanning Calorimetry (DSC) is used, to correlate the forming behavior with the precipitation distribution in the advanced stages of aging. The study shows that the forming behavior is strongly dependent on the condition the alloy.

An Assessment of Regional Variations in Martian Modified Impact Crater Morphology

NASA Astrophysics Data System (ADS)

Craddock, Robert A.; Bandeira, Lourenço.; Howard, Alan D.

2018-03-01

Impact craters on Mars have been extensively modified by ancient geologic processes that may have included rainfall and surface runoff, snow and ice, denudation by lava flows, burial by eolian material, or others. Many of these processes can leave distinct signatures on the morphometry of the modified impact crater as well as the surrounding landscape. To look for signs of potential regional differences in crater modification processes, we conducted an analysis of different morphometric parameters related to modified impact craters located in the Margaritifer Sinus, Sinus Sabaeus, Iapygia, Mare Tyrrhenum, Aeolis, and Eridania quadrangles, including depth, crater wall slope, crater floor slope, the curvature between the interior wall and the crater floor slope, and the curvature between the interior wall and surrounding landscape. A Welch's t test analysis comparing these parameters shows that fresh impact craters (Type 4) have consistent morphologies regardless of their geographic location examined in this study, which is not unexpected. Modified impact craters both in the initial (Type 3) and terminal stages (Type 1) of modification also have statistically consistent morphologies. This would suggest that the processes that operated in the late Noachian were globally ubiquitous, and that modified craters eventually reached a stable crater morphology. However, craters preserved in advanced (but not terminal) stages of modification (Type 2) have morphologies that vary across the quadrangles. It is possible that these variations reflect spatial differences in the types and intensity of geologic processes that operated during the Noachian, implying that the ancient climate also varied across regions.

Multifunctional two-stage riser fluid catalytic cracking process.

PubMed

Zhang, Jinhong; Shan, Honghong; Chen, Xiaobo; Li, Chunyi; Yang, Chaohe

This paper described the discovering process of some shortcomings of the conventional fluid catalytic cracking (FCC) process and the proposed two-stage riser (TSR) FCC process for decreasing dry gas and coke yields and increasing light oil yield, which has been successfully applied in 12 industrial units. Furthermore, the multifunctional two-stage riser (MFT) FCC process proposed on the basis of the TSR FCC process was described, which were carried out by the optimization of reaction conditions for fresh feedstock and cycle oil catalytic cracking, respectively, by the coupling of cycle oil cracking and light FCC naphtha upgrading processes in the second-stage riser, and the specially designed reactor for further reducing the olefin content of gasoline. The pilot test showed that it can further improve the product quality, increase the diesel yield, and enhance the conversion of heavy oil.

Staging in bipolar disorder: from theoretical framework to clinical utility

PubMed Central

Berk, Michael; Post, Robert; Ratheesh, Aswin; Gliddon, Emma; Singh, Ajeet; Vieta, Eduard; Carvalho, Andre F.; Ashton, Melanie M.; Berk, Lesley; Cotton, Susan M.; McGorry, Patrick D.; Fernandes, Brisa S.; Yatham, Lakshmi N.; Dodd, Seetal

2017-01-01

Illness staging is widely utilized in several medical disciplines to help predict course or prognosis, and optimize treatment. Staging models in psychiatry in general, and bipolar disorder in particular, depend on the premise that psychopathology moves along a predictable path: an at‐risk or latency stage, a prodrome progressing to a first clinical threshold episode, and one or more recurrences with the potential to revert or progress to late or end‐stage manifestations. The utility and validity of a staging model for bipolar disorder depend on its linking to clinical outcome, treatment response and neurobiological measures. These include progressive biochemical, neuroimaging and cognitive changes, and potentially stage‐specific differences in response to pharmacological and psychosocial treatments. Mechanistically, staging models imply the presence of an active disease process that, if not remediated, can lead to neuroprogression, a more malignant disease course and functional deterioration. Biological elements thought to be operative in bipolar disorder include a genetic diathesis, physical and psychic trauma, epigenetic changes, altered neurogenesis and apoptosis, mitochondrial dysfunction, inflammation, and oxidative stress. Many available agents, such as lithium, have effects on these targets. Staging models also suggest the utility of stage‐specific treatment approaches that may not only target symptom reduction, but also impede illness neuroprogression. These treatment approaches range from prevention for at‐risk individuals, to early intervention strategies for prodromal and newly diagnosed individuals, complex combination therapy for rapidly recurrent illness, and palliative‐type approaches for those at chronic, late stages of illness. There is hope that prompt initiation of potentially disease modifying therapies may preclude or attenuate the cognitive and structural changes seen in the later stages of bipolar disorder. The aims of this paper are to: a) explore the current level of evidence supporting the descriptive staging of the syndromal pattern of bipolar disorder; b) describe preliminary attempts at validation; c) make recommendations for the direction of further studies; and d) provide a distillation of the potential clinical implications of staging in bipolar disorder within a broader transdiagnostic framework. PMID:28941093

Technical Report on Modeling for Quasispecies Abundance Inference with Confidence Intervals from Metagenomic Sequence Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

McLoughlin, K.

2016-01-11

The overall aim of this project is to develop a software package, called MetaQuant, that can determine the constituents of a complex microbial sample and estimate their relative abundances by analysis of metagenomic sequencing data. The goal for Task 1 is to create a generative model describing the stochastic process underlying the creation of sequence read pairs in the data set. The stages in this generative process include the selection of a source genome sequence for each read pair, with probability dependent on its abundance in the sample. The other stages describe the evolution of the source genome from itsmore » nearest common ancestor with a reference genome, breakage of the source DNA into short fragments, and the errors in sequencing the ends of the fragments to produce read pairs.« less

Incorporating Risk Assessment and Inherently Safer Design Practices into Chemical Engineering Education

ERIC Educational Resources Information Center

Seay, Jeffrey R.; Eden, Mario R.

2008-01-01

This paper introduces, via case study example, the benefit of including risk assessment methodology and inherently safer design practices into the curriculum for chemical engineering students. This work illustrates how these tools can be applied during the earliest stages of conceptual process design. The impacts of decisions made during…

Language Issues in Literacy and Bilingual/Multicultural Education. Harvard Educational Review Reprint. Series No. 22.

ERIC Educational Resources Information Center

Minami, Masahiko, Ed.; Kennedy, Bruce P., Ed.

This collection of articles related to language issues and literacy and bilingual and multicultural education include the following: "Three Processes in the Child's Acquisition of Syntax" (Roger Brown and Ursula Bellugi); "Pre-School Children's Knowledge of English Phonology" (Charles Read); "Stages in Language Development and Reading Exposure"…

Numbers and Policy in Care for People with Intellectual Disability in the United Kingdom

ERIC Educational Resources Information Center

Glover, Gyles

2015-01-01

Background: Statements or commitments making use of numbers have an important place in government policy. They appear at all stages of the policy process: campaigning, formulation, monitoring and evaluation. Many types of sources are involved including research studies, national survey information, routine operational data collections and special…

Getting Inside Knowledge: The Application of Entwistle's Model of Surface/Deep Processing in Producing Open Learning Materials.

ERIC Educational Resources Information Center

Evans, Barbara; Honour, Leslie

1997-01-01

Reports on a study that required student teachers training in business education to produce open learning materials on intercultural communication. Analysis of stages and responses to this assignment revealed a distinction between "deep" and "surface" learning. Includes charts delineating the characteristics of these two types…

Developing Children's Literary Resources

ERIC Educational Resources Information Center

Peng, Chew Fong

2012-01-01

The Malay literary materials and resources for early childhood in Malaysia are still in the infant stage and have not been expanded to include the main references or developed into big book form. The children literature in our market is not published based on educational philosophy and research, but it is produced based on profit. The process of…

From Passive Acceptance to Active Commitment: A Model of Feminist Identity Development for Women.

ERIC Educational Resources Information Center

Downing, Nancy E.; Roush, Kristin L.

1985-01-01

Presents a model of feminist identity development for women, derived, in part, from Cross's (1971) theory of Black identity development. The stages in this process include passive acceptance, revelation, embeddedness-emanation, synthesis, and active commitment. Implications of the model are outlined for women, nonsexist and feminist…

Large-scale analysis of antisense transcription in wheat using the Affymetrix GeneChip Wheat Genome Array

USDA-ARS?s Scientific Manuscript database

Natural antisense transcripts (NATs) are transcripts of the opposite DNA strand to the sense-strand either at the same locus (cis-encoded) or a different locus (trans-encoded). They can affect gene expression at multiple stages including transcription, RNA processing and transport, and translation....

State of Student Aid and Higher Education in Texas, 2016

ERIC Educational Resources Information Center

Fernandez, Chris; Fletcher, Carla; Klepfer, Kasey

2016-01-01

Texas Guaranteed Student Loan Corporation (TG) provides critical support to schools, students, and borrowers at every stage of the federal student aid process--from providing information on how to pay for a higher education including financial aid options, to facilitating successful loan repayment after graduation. This 2016 issue of "State…

State of Student Aid and Higher Education in Texas

ERIC Educational Resources Information Center

Creusere, Marlena; Fletcher, Carla; Klepfer, Kasey; Norman, Patricia

2015-01-01

TG provides critical support to schools, students, and borrowers at every stage of the federal student aid process--from providing information on how to pay for a higher education including financial aid options, to facilitating successful loan repayment after graduation. This issue of "State of Student Aid and Higher Education in Texas"…

International Student Guide to U.S. Community Colleges, 2007-2008

ERIC Educational Resources Information Center

American Association of Community Colleges (NJ1), 2007

2007-01-01

This guide was produced for prospective students considering studying in the United States. The guide is organized to help students through all stages of the process, including learning about the U.S. higher education system, finding the right college, benefits of attending community college, obtaining a student visa, estimating expenses, living…

Rotating Biological Contactors (RBC's). Student Manual. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Zickefoose, Charles S.

This student manual provides the textual material for a unit on rotating biological contactors (RBC's). Topic areas considered include: (1) flow patterns of water through RBC installations; (2) basic concepts (shaft and stage); (3) characteristics of biomass; (4) mechanical features (bearings, mechanical drive systems, and air drive systems); (5)…

Grievance and Arbitration Practices and Decisions in Schools: Outcomes of Rational Decision Making?

ERIC Educational Resources Information Center

Osborne-Lampkin, La'Tara

2010-01-01

Some researchers suggest that grievance procedures and the arbitration process are effective tools that encourage careful decision making by school districts and administrative staff in the handling of personnel decisions (Shipley, 1974). Others contend that grievance procedures, which typically include arbitration as the final stage of the…

State of Student Aid and Higher Education in Texas, 2017

ERIC Educational Resources Information Center

Fernandez, Chris; Fletcher, Carla; Klepfer, Kasey

2017-01-01

The Texas Guaranteed Student Loan Corporation (TG) offers critical support to schools, students, and borrowers at every stage of the federal student aid process--from providing information on how to pay for a higher education, including financial aid options, to facilitating successful loan repayment after graduation. As part of that support, this…

Embedding Marketing in International Campus Development: Lessons from UK Universities

ERIC Educational Resources Information Center

Lewis, Vicky

2016-01-01

This paper provides recommendations for embedding a market- and marketing-informed approach within the development process for a new international campus. It includes a brief outline of the current global profile of international campuses (as one form of transnational education) before highlighting the role of marketing at key stages of campus…

Can Videogames Be Used to Develop the Infant Stage Educational Curriculum?

ERIC Educational Resources Information Center

Marín Díaz, Verónica; Martín-Párraga, Javier

2014-01-01

The utilization of videogames is not too common due to their consideration as an element that interferes with the educational and learning process. Thus, few teachers are ready to include videogames as didactic tools. Nevertheless, some educators who consider that they have a potential to become didactic tools are progressively adopting videogames…

Medical Informatics Specialty in the Developed English-Speaking Countries: The Terminology Comparative Analysis

ERIC Educational Resources Information Center

Kobryn, Nadia

2015-01-01

The article studies the development process of medical informatics specialty terminology as the ground for further research into foreign countries' experience, including the Canadian one, of specialists' professional training in the field of MI. The study determines the origin and chief stages of the formation and development of the medical…

Conversations with God: Prayer and Bargaining in Adjustment to Disability

ERIC Educational Resources Information Center

Rodriguez, Valerie J.; Glover-Graf, Noreen M.; Blanco, E. Lisette

2013-01-01

The role of religiosity and spirituality in the process of adjustment to disability is of increasing interest to rehabilitation professionals. Beginning with the Kubler-Ross models of grief and adjustment to disability and terminal illness, a number of stage models have included spiritual and religious interactions as a part of the adjustment…

Operative planning of functional sessions for multisatellite observation and communication systems

NASA Astrophysics Data System (ADS)

Darnopykh, Valeriy V.; Malyshev, Veniamin V.

2012-04-01

An important control aspect of modern satellite observation and communication systems is the control of the functional processes. Functional sessions proceed under conditions of restricted technical ability, large amounts or information to be processed by the on-board equipment, practice inequality of the received information, intentions of system management and operators, interests of customers and other factors. A large number of spacecrafts (SC) in orbital constellation is one of the most important factors affecting the functional process also. Besides that some modern projects of satellite systems are multifunctional that is mixed operations of observation and communication. Therefore the functioning of SC on-board equipment must be accurately co-ordinate. That is why the problem of operative planning the functioning of these systems, while directly affecting the efficiency of the system, is very complex and actual at present. A methodical approach and software package for operative planning of functional processes for satellite observation and communication systems, including multifunctional projects, are considered in the paper. The base scheme of this approach consists of four main stages: stage 1—modeling of SC orbital kinematics and dynamics; stage 2—modeling of system functional processes with all kind of restrictions and criterion function values; stage 3—solving an optimization tasks by numerical applicable algorithms and constructing the optimal (or accuracy) plans; stage 4—repeated plan optimization (different variants) and analyzing. Such scheme is the result of authors practical research which have been realized during last 15 years by the operative planning as for any kinds of single SC as for satellite systems with different structure of orbital constellation. The research helps to unify the procedure of operative planning, to formulate basic principles and approaches for its solving, to develop special software package. The main aspects of the approach proposed are illustrated in the paper. The results of the calculations of applied planning problems are presented. The objects of research in these problems are: projects of CBERS observation systems (1-3 SC) and projects of Iridium (66 SC) global communication system.

Cross-sectional analysis of penile length in males 13 to 15 years old according to pubertal development stages.

PubMed

Soydan, Hasan; Akyol, İlker; Ates, Ferhat; Yilmaz, Omer; Dursun, Furkan; Baykal, Kadir

2012-10-01

Genital development is affected by pubertal process to a great extent, and puberty is a complex phenomenon that is influenced by multiple factors resulting in individual differences. We studied penile length and its relationship to pubertal stage in boys 13 to 15 years old. Healthy boys who were candidates for military high school were evaluated between June and July 2011. Age, residence and body mass index were recorded. Stretched penile length was measured. Pubic hair was assessed according to Tanner and Marshall staging. Genital puberty stage was defined by measurement of testicular volume with Prader orchidometer. Relationship of penile length to age, residence, pubertal stages and body mass index was evaluated statistically. A total of 1,539 boys were included in the study. Mean ages and number of patients according to genital stage were as follows. Mean age was 14 years for genital stage 1 (5 patients), 13.9 years (range 13 to 15) for stage 2 (194), 14.07 years (13 to 15) for stage 3 (965) and 14.11 years (13 to 15) for stage 4 (375). Linear regression analysis revealed a significant effect of body mass index, genital stage and pubic hair stage on penile length (p <0.001) but no significant effect of age or residence. Mean penile length was significantly different among different age groups and among pubertal stages. However, mean penile lengths of different age groups within the same pubertal stage were similar. Penile length during puberty should be evaluated individually according to the current pubertal stage. Our study offers a reliable reference table of penile length for pubertal age group. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Integration of treatment innovation planning and implementation: strategic process models and organizational challenges.

PubMed

Lehman, Wayne E K; Simpson, D Dwayne; Knight, Danica K; Flynn, Patrick M

2011-06-01

Sustained and effective use of evidence-based practices in substance abuse treatment services faces both clinical and contextual challenges. Implementation approaches are reviewed that rely on variations of plan-do-study-act (PDSA) cycles, but most emphasize conceptual identification of core components for system change strategies. A two-phase procedural approach is therefore presented based on the integration of Texas Christian University (TCU) models and related resources for improving treatment process and program change. Phase 1 focuses on the dynamics of clinical services, including stages of client recovery (cross-linked with targeted assessments and interventions), as the foundations for identifying and planning appropriate innovations to improve efficiency and effectiveness. Phase 2 shifts to the operational and organizational dynamics involved in implementing and sustaining innovations (including the stages of training, adoption, implementation, and practice). A comprehensive system of TCU assessments and interventions for client and program-level needs and functioning are summarized as well, with descriptions and guidelines for applications in practical settings. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

Studying dynamic processes in liquids by TEM/STEM/DTEM

NASA Astrophysics Data System (ADS)

Abellan, Patricia; Evans, James; Woehl, Taylor; Jungjohann, Katherine; Parent, Lucas; Arslan, Ilke; Ristenpart, William; Browning, Nigel; Mater. Sci. Group Team; Microsc. Group Team; Catal. Sci. Group Collaboration; Ristenpart Res. Group Collaboration

2013-03-01

In order to study dynamic phenomena such as corrosion or catalysis, extreme environmental conditions must be reproduced around the specimen - these include high-temperatures, high-pressures, specific oxidizing/reducing atmospheres or a liquid environment. The use of environmental stages specifically designed to fit in any transmission electron microscope (TEM) allows us to apply the distinct capabilities of each instrument to study dynamic processes. Localized gas/fluid conditions are created around the sample and separated from the high vacuum inside the microscope using hermetically sealed windowed-cells. Advanced capabilities of these techniques include spatial resolutions of ~1 Angstrom or better in aberration corrected instruments or temporal resolutions in the microsecond-nanosecond range in a dynamic TEM (DTEM). Here, unique qualities of the DTEM that benefit the in-situ experiments with gas/fluid environmental cells will be discussed. We also present our results with a liquid stage allowing atomic resolution imaging of nanomaterials in a colloidal suspension, core EEL spectra acquisition, continuous flow, controlled growth of nanocrystals and systematic calibration of the effect of the electron dose on silver nuclei formation.

The Influence of Different Representations on Solving Concentration Problems at Elementary School

NASA Astrophysics Data System (ADS)

Liu, Chia-Ju; Shen, Ming-Hsun

2011-10-01

This study investigated the students' learning process of the concept of concentration at the elementary school level in Taiwan. The influence of different representational types on the process of proportional reasoning was also explored. The participants included nineteen third-grade and eighteen fifth-grade students. Eye-tracking technology was used in conducting the experiment. The materials were adapted from Noelting's (1980a) "orange juice test" experiment. All problems on concentration included three stages (the intuitive, the concrete operational, and the formal operational), and each problem was displayed in iconic and symbolic representations. The data were collected through eye-tracking technology and post-test interviews. The results showed that the representational types influenced students' solving of concentration problems. Furthermore, the data on eye movement indicated that students used different strategies or rules to solve concentration problems at the different stages of the problems with different representational types. This study is intended to contribute to the understanding of elementary school students' problem-solving strategies and the usability of eye-tracking technology in related studies.

A generalized disjunctive programming framework for the optimal synthesis and analysis of processes for ethanol production from corn stover.

PubMed

Scott, Felipe; Aroca, Germán; Caballero, José Antonio; Conejeros, Raúl

2017-07-01

The aim of this study is to analyze the techno-economic performance of process configurations for ethanol production involving solid-liquid separators and reactors in the saccharification and fermentation stage, a family of process configurations where few alternatives have been proposed. Since including these process alternatives creates a large number of possible process configurations, a framework for process synthesis and optimization is proposed. This approach is supported on kinetic models fed with experimental data and a plant-wide techno-economic model. Among 150 process configurations, 40 show an improved MESP compared to a well-documented base case (BC), almost all include solid separators and some show energy retrieved in products 32% higher compared to the BC. Moreover, 16 of them also show a lower capital investment per unit of ethanol produced per year. Several of the process configurations found in this work have not been reported in the literature. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simulation Of Assembly Processes With Technical Of Virtual Reality

NASA Astrophysics Data System (ADS)

García García, Manuel; Arenas Reina, José Manuel; Lite, Alberto Sánchez; Sebastián Pérez, Miguel Ángel

2009-11-01

Virtual reality techniques use at industrial processes provides a real approach to product life cycle. For components manual assembly, the use of virtual surroundings facilitates a simultaneous engineering in which variables such as human factors and productivity take a real act. On the other hand, in the actual phase of industrial competition it is required a rapid adjustment to client needs and to market situation. In this work it is analyzed the assembly of the front components of a vehicle using virtual reality tools and following up a product-process design methodology which includes every life service stage. This study is based on workstations design, taking into account productive and human factors from the ergonomic point of view implementing a postural study of every assembly operation, leaving the rest of stages for a later study. Design is optimized applying this methodology together with the use of virtual reality tools. It is also achieved a 15% reduction on time assembly and of 90% reduction in muscle—skeletal diseases at every assembly operation.

A review of risk management process in construction projects of developing countries

NASA Astrophysics Data System (ADS)

Bahamid, R. A.; Doh, S. I.

2017-11-01

In the construction industry, risk management concept is a less popular technique. There are three main stages in the systematic approach to risk management in construction industry. These stages include: a) risk response; b) risk analysis and evaluation; and c) risk identification. The high risk related to construction business affects each of its participants; while operational analysis and management of construction related risks remain an enormous task to practitioners of the industry. This paper tends towards reviewing the existing literature on construction project risk managements in developing countries specifically on risk management process. The literature lacks ample risk management process approach capable of capturing risk impact on diverse project objectives. This literature review aims at discovering the frequently used techniques in risk identification and analysis. It also attempts to identify response to clarifying the different classifications of risk sources in the existing literature of developing countries, and to identify the future research directions on project risks in the area of construction in developing countries.

Power generation based on biomass by combined fermentation and gasification--a new concept derived from experiments and modelling.

PubMed

Methling, Torsten; Armbrust, Nina; Haitz, Thilo; Speidel, Michael; Poboss, Norman; Braun-Unkhoff, Marina; Dieter, Heiko; Kempter-Regel, Brigitte; Kraaij, Gerard; Schliessmann, Ursula; Sterr, Yasemin; Wörner, Antje; Hirth, Thomas; Riedel, Uwe; Scheffknecht, Günter

2014-10-01

A new concept is proposed for combined fermentation (two-stage high-load fermenter) and gasification (two-stage fluidised bed gasifier with CO2 separation) of sewage sludge and wood, and the subsequent utilisation of the biogenic gases in a hybrid power plant, consisting of a solid oxide fuel cell and a gas turbine. The development and optimisation of the important processes of the new concept (fermentation, gasification, utilisation) are reported in detail. For the gas production, process parameters were experimentally and numerically investigated to achieve high conversion rates of biomass. For the product gas utilisation, important combustion properties (laminar flame speed, ignition delay time) were analysed numerically to evaluate machinery operation (reliability, emissions). Furthermore, the coupling of the processes was numerically analysed and optimised by means of integration of heat and mass flows. The high, simulated electrical efficiency of 42% including the conversion of raw biomass is promising for future power generation by biomass. Copyright © 2014 Elsevier Ltd. All rights reserved.

Testing Processability Theory in L2 Spanish: Can Readiness or Markedness Predict Development?

ERIC Educational Resources Information Center

Bonilla, Carrie L.

2012-01-01

The goal of this dissertation is to test the five stages of Processability Theory (PT) for second language (L2) learners of Spanish and investigate how instruction can facilitate the development through the stages. PT details five fixed stages in the acquisition of L2 morphosyntax based on principles of speech processing (Levelt, 1989) and modeled…

Development of a two-stage in vitro model system to investigate the mineralization mechanisms involved in idiopathic stone formation: stage 1-biomimetic Randall's plaque using decellularized porcine kidneys.

PubMed

Lovett, Archana C; Khan, Saeed R; Gower, Laurie B

2018-05-18

Idiopathic calcium oxalate (CaOx) stone formers form stones that are commonly attached to calcium phosphate (CaP) deposits in the renal tissue, known as Randall's plaques (RP). Plaques are suggested to originate in the renal tubular basement membrane, where they exhibit a morphology of concentrically laminated apatitic spherules, while in the interstitial regions, the collagen fibrils and vesicles become mineralized. We hypothesize that these minerals might form by non-classical crystallization mechanisms, such as via amorphous precursors, some of which might originate from a polymer-induced liquid-precursor (PILP) process. Thus, our goal is to identify mineralogical 'signatures' of various stone formation mechanisms. To do this for idiopathic CaOx stones, we are developing a two-stage model system of CaP-CaOx composite stones, consisting of stage (1) CaP mineralized plaque, followed by stage (2) CaOx overgrowth into a stone. For the studies presented here, decellularized porcine kidneys were mineralized with CaP using polyaspartic acid or the protein osteopontin (OPN) to induce the PILP process and create biomimetic RP. Analysis of the PILP-mineralized tissues shows features that resemble the native plaques, including mineral spherules and collagen with intrafibrillar mineral. In contrast, the classical crystallization produced large apatitic spherulites, which is a very different morphology, but one which is also found in some stones. An alternative hypothesis regarding Randall's plaque, and if or when it becomes pathological, is discussed.

Therapeutic enhancement: nursing intervention category for patients diagnosed with Readiness for Therapeutic Regimen Management.

PubMed

Kelly, Cynthia W

2008-04-01

To present a new nursing intervention category called therapeutic enhancement. Fewer than half of North Americans follow their physician's recommendations for diet and exercise, even when such are crucial to their health or recovery. It is imperative that nurses consider new ways to promote healthy behaviours. Therapeutic enhancement is intended to provide such a fresh approach. Traditional intervention techniques focusing on education, contracts, social support and more frequent interaction with physicians appear not to be effective when used alone. Successful strategies have been multidisciplinary; and have included interventions by professional nurses who assist patients to understand their disease and the disease process and that helps them to develop disease-management and self-management skills. Therapeutic enhancement incorporates The Stages of Change Theory, Commitment to Health Theory, Motivational Interviewing techniques and instrumentation specifically designed for process evaluation of health-promoting interventions. This is a critical review of approaches that, heretofore, have not been synthesised in a single published article. Based on the commonly used Stages of Change model, therapeutic enhancement is useful for patients who are at the action stage of change. Using therapeutic enhancement as well as therapeutic strategies identified in Stages of Change Theory, such as contingency management, helping relationships, counterconditioning, stimulus control and Motivational Interviewing techniques, nursing professionals can significantly increase the chances of patients moving from action to the maintenance stage of change for a specific health behaviour. Using the nursing intervention category, therapeutic enhancement can increase caregivers' success in helping patients maintain healthy behaviours.

Characterization of the cork oak transcriptome dynamics during acorn development.

PubMed

Miguel, Andreia; de Vega-Bartol, José; Marum, Liliana; Chaves, Inês; Santo, Tatiana; Leitão, José; Varela, Maria Carolina; Miguel, Célia M

2015-06-25

Cork oak (Quercus suber L.) has a natural distribution across western Mediterranean regions and is a keystone forest tree species in these ecosystems. The fruiting phase is especially critical for its regeneration but the molecular mechanisms underlying the biochemical and physiological changes during cork oak acorn development are poorly understood. In this study, the transcriptome of the cork oak acorn, including the seed, was characterized in five stages of development, from early development to acorn maturation, to identify the dominant processes in each stage and reveal transcripts with important functions in gene expression regulation and response to water. A total of 80,357 expressed sequence tags (ESTs) were de novo assembled from RNA-Seq libraries representative of the several acorn developmental stages. Approximately 7.6 % of the total number of transcripts present in Q. suber transcriptome was identified as acorn specific. The analysis of expression profiles during development returned 2,285 differentially expressed (DE) transcripts, which were clustered into six groups. The stage of development corresponding to the mature acorn exhibited an expression profile markedly different from other stages. Approximately 22 % of the DE transcripts putatively code for transcription factors (TF) or transcriptional regulators, and were found almost equally distributed among the several expression profile clusters, highlighting their major roles in controlling the whole developmental process. On the other hand, carbohydrate metabolism, the biological pathway most represented during acorn development, was especially prevalent in mid to late stages as evidenced by enrichment analysis. We further show that genes related to response to water, water deprivation and transport were mostly represented during the early (S2) and the last stage (S8) of acorn development, when tolerance to water desiccation is possibly critical for acorn viability. To our knowledge this work represents the first report of acorn development transcriptomics in oaks. The obtained results provide novel insights into the developmental biology of cork oak acorns, highlighting transcripts putatively involved in the regulation of the gene expression program and in specific processes likely essential for adaptation. It is expected that this knowledge can be transferred to other oak species of great ecological value.

Neural Differentiation of Embryonic Stem Cells In Vitro: A Road Map to Neurogenesis in the Embryo

PubMed Central

Abranches, Elsa; Silva, Margarida; Pradier, Laurent; Schulz, Herbert; Hummel, Oliver; Henrique, Domingos; Bekman, Evguenia

2009-01-01

Background The in vitro generation of neurons from embryonic stem (ES) cells is a promising approach to produce cells suitable for neural tissue repair and cell-based replacement therapies of the nervous system. Available methods to promote ES cell differentiation towards neural lineages attempt to replicate, in different ways, the multistep process of embryonic neural development. However, to achieve this aim in an efficient and reproducible way, a better knowledge of the cellular and molecular events that are involved in the process, from the initial specification of neuroepithelial progenitors to their terminal differentiation into neurons and glial cells, is required. Methodology/Principal Findings In this work, we characterize the main stages and transitions that occur when ES cells are driven into a neural fate, using an adherent monolayer culture system. We established improved conditions to routinely produce highly homogeneous cultures of neuroepithelial progenitors, which organize into neural tube-like rosettes when they acquire competence for neuronal production. Within rosettes, neuroepithelial progenitors display morphological and functional characteristics of their embryonic counterparts, namely, apico-basal polarity, active Notch signalling, and proper timing of production of neurons and glia. In order to characterize the global gene activity correlated with each particular stage of neural development, the full transcriptome of different cell populations that arise during the in vitro differentiation protocol was determined by microarray analysis. By using embryo-oriented criteria to cluster the differentially expressed genes, we define five gene expression signatures that correlate with successive stages in the path from ES cells to neurons. These include a gene signature for a primitive ectoderm-like stage that appears after ES cells enter differentiation, and three gene signatures for subsequent stages of neural progenitor development, from an early stage that follows neural induction to a final stage preceding terminal differentiation. Conclusions/Significance Overall, our work confirms and extends the cellular and molecular parallels between monolayer ES cell neural differentiation and embryonic neural development, revealing in addition novel aspects of the genetic network underlying the multistep process that leads from uncommitted cells to differentiated neurons. PMID:19621087

Research in the design of high-performance reconfigurable systems

NASA Technical Reports Server (NTRS)

Slotnick, D. L.; Mcewan, S. D.; Spry, A. J.

1984-01-01

An initial design for the Bit Processor (BP) referred to in prior reports as the Processing Element or PE has been completed. Eight BP's, together with their supporting random-access memory, a 64 k x 9 ROM to perform addition, routing logic, and some additional logic, constitute the components of a single stage. An initial stage design is given. Stages may be combined to perform high-speed fixed or floating point arithmetic. Stages can be configured into a range of arithmetic modules that includes bit-serial one or two-dimensional arrays; one or two dimensional arrays fixed or floating point processors; and specialized uniprocessors, such as long-word arithmetic units. One to eight BP's represent a likely initial chip level. The Stage would then correspond to a first-level pluggable module. As both this project and VLSI CAD/CAM progress, however, it is expected that the chip level would migrate upward to the stage and, perhaps, ultimately the box level. The BP RAM, consisting of two banks, holds only operands and indices. Programs are at the box (high-level function) and system level. At the system level initial effort has been concentrated on specifying the tools needed to evaluate design alternatives.