Human Clinical-Grade Parthenogenetic ESC-Derived Dopaminergic Neurons Recover Locomotive Defects of Nonhuman Primate Models of Parkinson's Disease.

PubMed

Wang, Yu-Kai; Zhu, Wan-Wan; Wu, Meng-Hua; Wu, Yi-Hui; Liu, Zheng-Xin; Liang, Ling-Min; Sheng, Chao; Hao, Jie; Wang, Liu; Li, Wei; Zhou, Qi; Hu, Bao-Yang

2018-06-07

Clinical application of stem cell derivatives requires clinical-grade cells and sufficient preclinical proof of safety and efficacy, preferably in primates. We previously successfully established a clinical-grade human parthenogenetic embryonic stem cell (hPESC) line, but the suitability of its subtype-specific progenies for therapy is not clear. Here, we compared the function of clinical-grade hPESC-derived midbrain dopaminergic (DA) neurons in two canonical protocols in a primate Parkinson's disease (PD) model. We found that the grafts did not form tumors and produced variable but apparent behavioral improvement for at least 24 months in most monkeys in both groups. In addition, a slight DA increase in the striatum correlates with significant functional improvement. These results demonstrated that clinical-grade hPESCs can serve as a reliable source of cells for PD treatment. Our proof-of-concept findings provide preclinical data for China's first ESC-based phase I/IIa clinical study of PD (ClinicalTrials.gov number NCT03119636). Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Clinical-grade mesenchymal stromal cells produced under various good manufacturing practice processes differ in their immunomodulatory properties: standardization of immune quality controls.

PubMed

Menard, Cedric; Pacelli, Luciano; Bassi, Giulio; Dulong, Joelle; Bifari, Francesco; Bezier, Isabelle; Zanoncello, Jasmina; Ricciardi, Mario; Latour, Maelle; Bourin, Philippe; Schrezenmeier, Hubert; Sensebé, Luc; Tarte, Karin; Krampera, Mauro

2013-06-15

Clinical-grade mesenchymal stromal cells (MSCs) are usually expanded from bone marrow (BMMSCs) or adipose tissue (ADSCs) using processes mainly differing in the use of fetal calf serum (FCS) or human platelet lysate (PL). We aimed to compare immune modulatory properties of clinical-grade MSCs using a combination of fully standardized in vitro assays. BMMSCs expanded with FCS (BMMSC-FCS) or PL (BMMSC-PL), and ADSC-PL were analyzed in quantitative phenotypic and functional experiments, including their capacity to inhibit the proliferation of T, B, and NK cells. The molecular mechanisms supporting T-cell inhibition were investigated. These parameters were also evaluated after pre-stimulation of MSCs with inflammatory cytokines. BMMSC-FCS, BMMSC-PL, and ADSC-PL displayed significant differences in expression of immunosuppressive and adhesion molecules. Standardized functional assays revealed that resting MSCs inhibited proliferation of T and NK cells, but not B cells. ADSC-PL were the most potent in inhibiting T-cell growth, a property ascribed to interferon-γ-dependent indoleamine 2,3-dioxygenase activity. MSCs did not stimulate allogeneic T cell proliferation but were efficiently lysed by activated NK cells. The systematic use of quantitative and reproducible validation techniques highlights differences in immunological properties of MSCs produced using various clinical-grade processes. ADSC-PL emerge as a promising candidate for future clinical trials.

Clinical-Grade Mesenchymal Stromal Cells Produced Under Various Good Manufacturing Practice Processes Differ in Their Immunomodulatory Properties: Standardization of Immune Quality Controls

PubMed Central

Menard, Cedric; Pacelli, Luciano; Bassi, Giulio; Dulong, Joelle; Bifari, Francesco; Bezier, Isabelle; Zanoncello, Jasmina; Ricciardi, Mario; Latour, Maelle; Bourin, Philippe; Schrezenmeier, Hubert; Sensebé, Luc

2013-01-01

Clinical-grade mesenchymal stromal cells (MSCs) are usually expanded from bone marrow (BMMSCs) or adipose tissue (ADSCs) using processes mainly differing in the use of fetal calf serum (FCS) or human platelet lysate (PL). We aimed to compare immune modulatory properties of clinical-grade MSCs using a combination of fully standardized in vitro assays. BMMSCs expanded with FCS (BMMSC-FCS) or PL (BMMSC-PL), and ADSC-PL were analyzed in quantitative phenotypic and functional experiments, including their capacity to inhibit the proliferation of T, B, and NK cells. The molecular mechanisms supporting T-cell inhibition were investigated. These parameters were also evaluated after pre-stimulation of MSCs with inflammatory cytokines. BMMSC-FCS, BMMSC-PL, and ADSC-PL displayed significant differences in expression of immunosuppressive and adhesion molecules. Standardized functional assays revealed that resting MSCs inhibited proliferation of T and NK cells, but not B cells. ADSC-PL were the most potent in inhibiting T-cell growth, a property ascribed to interferon-γ-dependent indoleamine 2,3-dioxygenase activity. MSCs did not stimulate allogeneic T cell proliferation but were efficiently lysed by activated NK cells. The systematic use of quantitative and reproducible validation techniques highlights differences in immunological properties of MSCs produced using various clinical-grade processes. ADSC-PL emerge as a promising candidate for future clinical trials. PMID:23339531

The Computerized "Assistant Prof."

ERIC Educational Resources Information Center

Shough, J. Stuart

The computerized "Assistant Prof" program at the University of South Carolina at Spartanburg is written in Lotus 1-2-3 to aid college professors in all their various administrative duties. The program performs four distinctive functions: (1) record keeping; (2) form producing; (3) grade calculating; and (4) feedback of student class…

Higher-Order Theory for Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Aboudi, J.; Pindera, M. J.; Arnold, Steven M.

2001-01-01

Functionally graded materials (FGM's) are a new generation of engineered materials wherein the microstructural details are spatially varied through nonuniform distribution of the reinforcement phase(s). Engineers accomplish this by using reinforcements with different properties, sizes, and shapes, as well as by interchanging the roles of the reinforcement and matrix phases in a continuous manner (ref. 1). The result is a microstructure that produces continuously or discretely changing thermal and mechanical properties at the macroscopic or continuum scale. This new concept of engineering the material's microstructure marks the beginning of a revolution both in the materials science and mechanics of materials areas since it allows one, for the first time, to fully integrate the material and structural considerations into the final design of structural components. Functionally graded materials are ideal candidates for applications involving severe thermal gradients, ranging from thermal structures in advanced aircraft and aerospace engines to computer circuit boards. Owing to the many variables that control the design of functionally graded microstructures, full exploitation of the FGM's potential requires the development of appropriate modeling strategies for their response to combined thermomechanical loads. Previously, most computational strategies for the response of FGM's did not explicitly couple the material's heterogeneous microstructure with the structural global analysis. Rather, local effective or macroscopic properties at a given point within the FGM were first obtained through homogenization based on a chosen micromechanics scheme and then subsequently used in a global thermomechanical analysis.

Direct Metal Deposition of Functional Graded Structures in Ti- Al System

NASA Astrophysics Data System (ADS)

Shishkovsky, I.; Missemer, F.; Smurov, I.

A direct laser metal deposition (DLMD) technology with co-axial powder injection is used to fabricate a complex functional graded structure (FGS) fabrication. The aim of the study is to demonstrate the possibility to produce intermetallic phases in the Ti-Al powder systems in the course of a single-step DMD process. Besides, relationships between the main laser cladding parameters and the intermetallic phase structures of the built-up objects have been studied. In our research we applied the optical microscopy, X-ray analysis, microhardness measurement and SEM with EDX analysis of the laser-fabricated intermetallics. The discussion of the mechanisms of Ti x Al y (x,y = 1.3) intermetallic transformations in exothermal reactions is also offered in the report.

Scalable Production of Si Nanoparticles Directly from Low Grade Sources for Lithium-Ion Battery Anode.

PubMed

Zhu, Bin; Jin, Yan; Tan, Yingling; Zong, Linqi; Hu, Yue; Chen, Lei; Chen, Yanbin; Zhang, Qiao; Zhu, Jia

2015-09-09

Silicon, one of the most promising candidates as lithium-ion battery anode, has attracted much attention due to its high theoretical capacity, abundant existence, and mature infrastructure. Recently, Si nanostructures-based lithium-ion battery anode, with sophisticated structure designs and process development, has made significant progress. However, low cost and scalable processes to produce these Si nanostructures remained as a challenge, which limits the widespread applications. Herein, we demonstrate that Si nanoparticles with controlled size can be massively produced directly from low grade Si sources through a scalable high energy mechanical milling process. In addition, we systematically studied Si nanoparticles produced from two major low grade Si sources, metallurgical silicon (∼99 wt % Si, $1/kg) and ferrosilicon (∼83 wt % Si, $0.6/kg). It is found that nanoparticles produced from ferrosilicon sources contain FeSi2, which can serve as a buffer layer to alleviate the mechanical fractures of volume expansion, whereas nanoparticles from metallurgical Si sources have higher capacity and better kinetic properties because of higher purity and better electronic transport properties. Ferrosilicon nanoparticles and metallurgical Si nanoparticles demonstrate over 100 stable deep cycling after carbon coating with the reversible capacities of 1360 mAh g(-1) and 1205 mAh g(-1), respectively. Therefore, our approach provides a new strategy for cost-effective, energy-efficient, large scale synthesis of functional Si electrode materials.

Product recovery of ponderosa pine in Arizona and New Mexico.

Treesearch

Thomas D. Fahey; Janet K. Ayer. Sachet

1993-01-01

A mill recovery study of ponderosa pine in Arizona and New Mexico showed wide variation in quality within the resource. Lumber grade ranged widely by log grade and diameter, with a major difference within grade 5 logs between old growth and young growth. Old growth produced mostly Shop and Selects grades of lumber while young growth produced mostly Dimension grades of...

Effects of gravity on combustion synthesis of functionally graded biomaterials

NASA Astrophysics Data System (ADS)

Castillo, M.; Moore, J. J.; Schowengerdt, F. D.; Ayers, R. A.; Zhang, X.; Umakoshi, M.; Yi, H. C.; Guigne, J. Y.

2003-07-01

Combustion synthesis, or self-propagating, high temperature synthesis is currently being used at the Colorado School of Mines to produce advanced materials for biomedical applications. These biomaterials include ceramic, intermetallic, and metal-matrix composites for applications ranging from structural to oxidation- and wear-resistant materials, e.g., TiC-Ti, TiC-Cr 3C 2, MOSi 2-SiC, NiAl-TiB 2, to engineered porous composites, e.g., B 4C-Al 2O 3, Ti-TiB x, Ni-Ti, Ca 3(P0 4) 2 and glass-ceramic composites, e.g., CaO-SiO 2-BaO-Al 2O 3-TiB 2. The goal of the functionally graded biomaterials project is to develop new materials, graded in porosity and composition, which will combine the desirable mechanical properties of implant, e.g., NiTi, with the bone-growth enhancement properties of porous biodegradable ceramics, e.g., Ca 3(PO 4) 2. Recent experiments on the NASA parabolic flight (KC-135) aircraft have shown that gravity plays an important role in controlling the structure and properties of materials produced by combustion synthesis. The results of these studies, which will be presented at the conference, will provide valuable input to the design of experiments to be done in Space-DRUMS TM, a containerless materials processing facility scheduled to be placed on the International Space Station in 2003.

Longitudinal Growth on Curriculum-Based Measurements Mathematics Measures for Early Elementary Students

ERIC Educational Resources Information Center

Lembke, Erica; Lee, Young Sun; Park, Yoon Soo; Hampton, David

2016-01-01

This article describes a study addressing how Curriculum-Based Measurement mathematics measures function as screening tools for students in grades Kindergarten through 2 over time, and for students in different demographic groups. Specifically, the research questions were: (1) What growth rates are produced for Curriculum-Based Measurement early…

Cabozantinib S-malate in Treating Patients With Neuroendocrine Tumors Previously Treated With Everolimus That Are Locally Advanced, Metastatic, or Cannot Be Removed by Surgery

ClinicalTrials.gov

2018-03-12

Atypical Carcinoid Tumor; Carcinoid Tumor; Digestive System Neuroendocrine Neoplasm; Enterochromaffin Cell Serotonin-Producing Pancreatic Neuroendocrine Tumor; Functional Pancreatic Neuroendocrine Tumor; Intermediate Grade Lung Neuroendocrine Neoplasm; Low Grade Lung Neuroendocrine Neoplasm; Lung Atypical Carcinoid Tumor; Lung Carcinoid Tumor; Metastatic Digestive System Neuroendocrine Tumor G1; Neuroendocrine Neoplasm; Nonfunctional Pancreatic Neuroendocrine Tumor; Pancreatic Neuroendocrine Tumor; Stage IIIA Digestive System Neuroendocrine Tumor AJCC v7; Stage IIIB Digestive System Neuroendocrine Tumor AJCC v7; Stage IV Digestive System Neuroendocrine Tumor AJCC v7

The Fabrication of All-Solid-State Lithium-Ion Batteries via Spark Plasma Sintering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Xialu; Rechtin, Jack; Olevsky, Eugene

Spark plasma sintering (SPS) has been successfully used to produce all-solid-state lithium-ion batteries (ASSLibs). Both regular and functionally graded electrodes are implemented into novel three-layer and five-layer battery designs together with solid-state composite electrolyte. The electrical capacities and the conductivities of the SPS-processed ASSLibs are evaluated using the galvanostatic charge-discharge test. Experimental results have shown that, compared to the three-layer battery, the five-layer battery is able to improve energy and power densities. Scanning electron microscopy (SEM) is employed to examine the microstructures of the batteries especially at the electrode–electrolyte interfaces. It reveals that the functionally graded structure can eliminate themore » delamination effect at the electrode–electrolyte interface and, therefore, retains better performance.« less

The Fabrication of All-Solid-State Lithium-Ion Batteries via Spark Plasma Sintering

DOE PAGES

Wei, Xialu; Rechtin, Jack; Olevsky, Eugene

2017-09-14

Spark plasma sintering (SPS) has been successfully used to produce all-solid-state lithium-ion batteries (ASSLibs). Both regular and functionally graded electrodes are implemented into novel three-layer and five-layer battery designs together with solid-state composite electrolyte. The electrical capacities and the conductivities of the SPS-processed ASSLibs are evaluated using the galvanostatic charge-discharge test. Experimental results have shown that, compared to the three-layer battery, the five-layer battery is able to improve energy and power densities. Scanning electron microscopy (SEM) is employed to examine the microstructures of the batteries especially at the electrode–electrolyte interfaces. It reveals that the functionally graded structure can eliminate themore » delamination effect at the electrode–electrolyte interface and, therefore, retains better performance.« less

Development of a Novel Continuous Processing Technology for Functionally Graded Composite Energetic Materials Using an Inverse Design Procedure

DTIC Science & Technology

2006-01-01

is naturally suited to produce this type of gradient from one composition to another. Operating a twin screw extruder at one steady condition and...dynamically changing the ingredients to produce a new formulation will result in the extrudate changing from the original composition to second one...Because of the inherent backmixing in a twin screw extruder , an abrupt change in ingredients results in a more gradual change in the composition of

Lumber grade recovery from young ponderosa pine.

Treesearch

James E. Sowder

1953-01-01

Young ponderosa pine produces a good grade of common lumber, and close-grown trees produce better grades than those which were open-grown. This was shown by a study at the Pringle Falls Experimental Forest near Lapine in central Oregon.

Graded Multiple Choice Questions: Rewarding Understanding and Preventing Plagiarism

NASA Astrophysics Data System (ADS)

Denyer, G. S.; Hancock, D.

2002-08-01

This paper describes an easily implemented method that allows the generation and analysis of graded multiple-choice examinations. The technique, which uses standard functions in user-end software (Microsoft Excel 5+), can also produce several different versions of an examination that can be employed to prevent the reward of plagarism. The manuscript also discusses the advantages of having a graded marking system for the elimination of ambiguities, use in multi-step calculation questions, and questions that require extrapolation or reasoning. The advantages of the scrambling strategy, which maintains the same question order, is discussed with reference to student equity. The system provides a non-confrontational mechanism for dealing with cheating in large-class multiple-choice examinations, as well as providing a reward for problem solving over surface learning.

Price projections for selected grades of Douglas-fir lumber.

Treesearch

Richard W. Haynes; Thomas D. Fahey; Roger D. Fight

1988-01-01

Grade-specific price projections were developed for Douglas-fir lumber produced in the Douglas-fir region. These grade-specific price projections can be used as an aid in evaluating management practices that will affect the quality of saw logs that are produced.

Agricultural produce grading and sorting system using color CCD and new color identification algorithm

NASA Astrophysics Data System (ADS)

Wang, Dongsheng; Zou, Jizuo; Yang, Yunping; Dong, Jianhua; Zhang, Yuanxiang

1996-10-01

A high-speed automatic agricultural produce grading and sorting system using color CCD and new color identification algorithm has been developed. In a typical application, the system can sort almonds into tow output grades according to their color. Almonds ar rich in 18 kinds of amino acids and 13 kinds of micro minerals and vitamins and can be made into almond drink. In order to ensure the drink quality, almonds must be sorted carefully before being made into a drink. Using this system, almonds can be sorted into two grades: up to grade and below grade almonds or foreign materials. A color CCD inspects the almonds passing on a conveyor of rotating rollers, a color identification algorithm grades almonds and distinguishes foreign materials from almonds. Employing an elaborately designed mechanism, the below grade almonds and foreign materials can be removed effectively from the raw almonds. This system can be easily adapted for inspecting and sorting other kinds of agricultural produce such as peanuts, beans tomatoes and so on.

Multifunctional graded dielectrics fabricated using dry powder printing

NASA Astrophysics Data System (ADS)

Good, Austin J.; Roper, David; Good, Brandon; Yarlagadda, Shridhar; Mirotznik, Mark S.

2017-09-01

The ability to fabricate multifunctional devices that combine good structural properties with embedded electromagnetic functionality has many practical applications, including antireflective surfaces for structural radomes, load bearing conformal antennas, integrated RF transmission lines and passive beam forming networks. We describe here a custom made 3D printer that can print high dielectric constant ceramic powders within a low-loss structural composite substrate to produce mechanically robust parts with integrated graded dielectric properties. We fabricated a number of these parts and evaluated their anisotropic dielectric properties by determining the complete permittivity tensor of the printed samples as a function of local powder weight. This data was then experimentally validated using two practical examples: a Chebyshev antireflective stack and a 2D passive beamsteering network. The results of both electromagnetic systems displayed acceptable agreement between the simulated and measured results. This agreement shows that powder printing is a potential approach for fabricating spatially graded dielectric electromagnetic systems. This paper was submitted for review on 15 February 2017. The project is funded by the Office of Naval Research, Code 331.

High velocity continuous-flow reactor for the production of solar grade silicon

NASA Technical Reports Server (NTRS)

Woerner, L.

1977-01-01

The feasibility of a high volume, high velocity continuous reduction reactor as an economical means of producing solar grade silicon was tested. Bromosilanes and hydrogen were used as the feedstocks for the reactor along with preheated silicon particles which function both as nucleation and deposition sites. A complete reactor system was designed and fabricated. Initial preheating studies have shown the stability of tetrabromosilane to being heated as well as the ability to preheat hydrogen to the desired temperature range. Several test runs were made and some silicon was obtained from runs carried out at temperatures in excess of 1180 K.

Method and system using power modulation for maskless vapor deposition of spatially graded thin film and multilayer coatings with atomic-level precision and accuracy

DOEpatents

Montcalm, Claude [Livermore, CA; Folta, James Allen [Livermore, CA; Tan, Swie-In [San Jose, CA; Reiss, Ira [New City, NY

2002-07-30

A method and system for producing a film (preferably a thin film with highly uniform or highly accurate custom graded thickness) on a flat or graded substrate (such as concave or convex optics), by sweeping the substrate across a vapor deposition source operated with time-varying flux distribution. In preferred embodiments, the source is operated with time-varying power applied thereto during each sweep of the substrate to achieve the time-varying flux distribution as a function of time. A user selects a source flux modulation recipe for achieving a predetermined desired thickness profile of the deposited film. The method relies on precise modulation of the deposition flux to which a substrate is exposed to provide a desired coating thickness distribution.

A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties

NASA Astrophysics Data System (ADS)

Biermann, D.; Gausemeier, J.; Heim, H.-P.; Hess, S.; Petersen, M.; Ries, A.; Wagner, T.

2014-05-01

In this contribution a framework for the computer-aided planning and optimisation of functional graded components is presented. The framework is divided into three modules - the "Component Description", the "Expert System" for the synthetisation of several process chains and the "Modelling and Process Chain Optimisation". The Component Description module enhances a standard computer-aided design (CAD) model by a voxel-based representation of the graded properties. The Expert System synthesises process steps stored in the knowledge base to generate several alternative process chains. Each process chain is capable of producing components according to the enhanced CAD model and usually consists of a sequence of heating-, cooling-, and forming processes. The dependencies between the component and the applied manufacturing processes as well as between the processes themselves need to be considered. The Expert System utilises an ontology for that purpose. The ontology represents all dependencies in a structured way and connects the information of the knowledge base via relations. The third module performs the evaluation of the generated process chains. To accomplish this, the parameters of each process are optimised with respect to the component specification, whereby the result of the best parameterisation is used as representative value. Finally, the process chain which is capable of manufacturing a functionally graded component in an optimal way regarding to the property distributions of the component description is presented by means of a dedicated specification technique.

Polytomous Differential Item Functioning and Violations of Ordering of the Expected Latent Trait by the Raw Score

ERIC Educational Resources Information Center

DeMars, Christine E.

2008-01-01

The graded response (GR) and generalized partial credit (GPC) models do not imply that examinees ordered by raw observed score will necessarily be ordered on the expected value of the latent trait (OEL). Factors were manipulated to assess whether increased violations of OEL also produced increased Type I error rates in differential item…

Application of photocuring technique on wood surface and its prospects in Bangladesh

NASA Astrophysics Data System (ADS)

Bhattcacharia, S. K.; Khan, Mubarak A.

2005-07-01

Photocuring technique has unveiled a new horizon in polymer science. Application of photocuring technique on wood surface has enhanced the use of low grade wood. As Bangladesh is an overpopulated country, necessity of good quality wood is increasing day by day. So low grade wood, like Simul or Partex, locally produced particleboard, would come out with great use. As Partex board, produced from Jute sticks and various types of indigenous low grade wood and particle board are abundant in Bangladesh, so photocuring could play a major role to improve the quality of low grade wood and serve the nation. Already, a lot of research works were carried out by the local scientists to improve the wood surface using UV curing method. Different formulations were also developed by the local scientists using various oligomer, monomer and different types of additives. The used oligomers are epoxy, polyester, urethane, etc. and monomers of different functionalities and used additives are acrylic monomer, CaCO3, sand, MgSiO3, talc, etc. Thin films were prepared on glass plate with different formulations using UV radiation and different characteristics properties (pendulum hardness, abrasion, gloss (60° and 20°), microscratch hardness, weathering effect, adhesion strength, etc.) were studied. Now, a Pilot Plant has already been established with the financial assistance by the government of Bangladesh, worth US 3.5 million.

Vesicoureteral reflux in the primate IV: does reflux harm the kidney

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, J.A.; Fischman, N.H.; Thomas, R.

1982-09-01

It has been said that vesicoureteral reflux causes renal scarring because of intrarenal reflux. We studied reflux in the monkey because of its similarity to man, especially in regard to the incidence of vesicoureteral reflux and chronic pyelonephritis. High pressure moderate grade reflux was produced and renal function followed by means of quantitative renal camera studies using /sup 131/I hippuran. There was no change in renal function from sterile reflux even when intrarenal reflux occurred. When, however, infection was introduced, renal function decreased. We concluded that sterile moderate vesicoureteral or intrarenal reflux does not harm the kidney.

An evaluation of a coupled microstructural approach for the analysis of functionally graded composites via the finite-element method

NASA Technical Reports Server (NTRS)

Pindera, Marek-Jerzy; Dunn, Patrick

1995-01-01

A comparison is presented between the predictions of the finite-element analysis and a recently developed higher-order theory for functionally graded materials subjected to a thorough-thickness temperature gradient. In contrast to existing micromechanical theories that utilize classical (i.e., uncoupled) homogenization schemes to calculate micro-level and macro-level stress and displacement fields in materials with uniform or nonuniform fiber spacing (i.e., functionally graded materials), the new theory explicitly couples the microstructural details with the macrostructure of the composite. Previous thermo-elastic analysis has demonstrated that such coupling is necessary when: the temperature gradient is large with respect to the dimension of the reinforcement; the characteristic dimension of the reinforcement is large relative to the global dimensions of the composite and the number of reinforcing fibers or inclusions is small. In these circumstances, the standard micromechanical analyses based on the concept of the representative volume element used to determine average composite properties produce questionable results. The comparison between the predictions of the finite-element method and the higher-order theory presented herein establish the theory's accuracy in predicting thermal and stress fields within composites with a finite number of fibers in the thickness direction subjected to a thorough-thickness thermal gradient.

Fine-Grained Parcellation of Brain Connectivity Improves Differentiation of States of Consciousness During Graded Propofol Sedation.

PubMed

Liu, Xiaolin; Lauer, Kathryn K; Ward, B Douglas; Roberts, Christopher J; Liu, Suyan; Gollapudy, Suneeta; Rohloff, Robert; Gross, William; Xu, Zhan; Chen, Guangyu; Binder, Jeffrey R; Li, Shi-Jiang; Hudetz, Anthony G

2017-08-01

Conscious perception relies on interactions between spatially and functionally distinct modules of the brain at various spatiotemporal scales. These interactions are altered by anesthesia, an intervention that leads to fading consciousness. Relatively little is known about brain functional connectivity and its anesthetic modulation at a fine spatial scale. Here, we used functional imaging to examine propofol-induced changes in functional connectivity in brain networks defined at a fine-grained parcellation based on a combination of anatomical and functional features. Fifteen healthy volunteers underwent resting-state functional imaging in wakeful baseline, mild sedation, deep sedation, and recovery of consciousness. Compared with wakeful baseline, propofol produced widespread, dose-dependent functional connectivity changes that scaled with the extent to which consciousness was altered. The dominant changes in connectivity were associated with the frontal lobes. By examining node pairs that demonstrated a trend of functional connectivity change between wakefulness and deep sedation, quadratic discriminant analysis differentiated the states of consciousness in individual participants more accurately at a fine-grained parcellation (e.g., 2000 nodes) than at a coarse-grained parcellation (e.g., 116 anatomical nodes). Our study suggests that defining brain networks at a high granularity may provide a superior imaging-based distinction of the graded effect of anesthesia on consciousness.

Neurological function after total en bloc spondylectomy for thoracic spinal tumors.

PubMed

Murakami, Hideki; Kawahara, Norio; Demura, Satoru; Kato, Satoshi; Yoshioka, Katsuhito; Tomita, Katsuro

2010-03-01

Total en bloc spondylectomy (TES) for thoracic spinal tumors may in theory produce neurological dysfunction as a result of ischemic or mechanical damage to the spinal cord. Potential insults include preoperative embolization at 3 levels, intraoperative ligation of segmental arteries, nerve root ligation, and circumferential dural dissection. The purpose of this study was to assess neurological function after thoracic TES. The authors performed a retrospective review of 79 patients with thoracic-level spinal tumors that had been treated with TES between 1989 and 2006. Neurological function was retrospectively analyzed according to the Frankel grading system. Of the 79 cases, 26 involved primary tumors and 53 involved metastatic tumors. The number of excised vertebrae was 1 in 60 cases, 2 in 13, and >or= 3 in 6. The Frankel grade before surgery was B in 1 case, C in 16, D in 29, and E in 33. At the follow-up, the Frankel grade was C in 2 cases, D in 24, and E in 53. Of 46 cases with neurological deficits before surgery, neurological improvement of at least 1 Frankel grade was achieved in 25 cases (54.3%). Although the Frankel grade did not change in 21 patients, improvement in neurological symptoms within the same Frankel grade did occur in these patients. There were no cases of neurological deterioration. There was no neurological deterioration due to preoperative embolization, ligation of segmental arteries, or ligation of thoracic nerve roots. Each of the cases with preoperative neurological deficits showed improvement in neurological symptoms. Data in the current study clinically proved that TES is a safe operation with respect to spinal cord blood flow. In TES, the spinal cord is circumferentially decompressed and the spinal column is shortened. An increase in spinal cord blood flow due to spinal shortening in addition to decompression was considered to have brought about a resolution of neurological symptoms with TES.

40 CFR 421.222 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technical grade molybdenum plus vanadium plus pure grade molybdenum produced Arsenic 40.778 18.145 Chromium... vanadium plus pure grade molybdenum produced Arsenic 121.720 54.162 Chromium 25.625 10.483 Lead 24.460 11... times. (c) Vanadium decomposition wet air pollution control. BPT Limitations for the Secondary...

Friction Spinning—New Innovative Tool Systems For The Production of Complex Functionally Graded Workpieces

NASA Astrophysics Data System (ADS)

Homberg, Werner; Hornjak, Daniel

2011-05-01

Friction spinning is a new innovative and promising incremental forming technology implying high potential regarding the manufacturing of complex functionally graded workpieces and enhancing existing forming limits of conventional metal spinning processes. The friction spinning process is based on the integration of thermo-mechanical friction subprocesses in this incremental forming process. By choosing the appropriate process parameters, e.g. axial feed rate or relative motion, the contact conditions between tool and workpiece can be influenced in a defined way and, thus, a required temperature profile can be obtained. Friction spinning allows the extension of forming limits compared to conventional metal spinning in order to produce multifunctional components with locally varying properties and the manufacturing of e.g. complex hollow parts made of tubes, profiles, or sheet metals. In this way, it meets the demands regarding efficiency and the manufacturing of functionally graded lightweight components. There is e.g. the possibility of locally increasing the wall thickness in joining zones and, as a consequence, achieving higher quality of the joint at decreased expense. These products are not or only hardly producible by conventional processes so far. In order to benefit from the advantages and potentials of this new innovative process new tooling systems and concepts are indispensable which fulfill the special requirements of this thermo-mechanical process concerning thermal and tribological loads and which allow simultaneous and defined forming and friction operations. An important goal of the corresponding research work at the Chair of Forming and Machining Technology at the University of Paderborn is the development of tool systems that allow the manufacturing of such complex parts by simple uniaxial or sequential biaxial linear tool paths. In the paper, promising tool systems and geometries as well as results of theoretical and experimental research work (e.g. regarding the influence and interaction of process parameters on the workpiece quality) will be discussed. Furthermore, possibilities regarding the manufacturing of geometries (demonstrator workpieces) which are not or only hardly producible with conventional processes will be presented.

Determinants for grading Malaysian rice

NASA Astrophysics Data System (ADS)

ChePa, Noraziah; Yusoff, Nooraini; Ahmad, Norhayati

2016-08-01

Due to un-uniformity of rice grading practices in Malaysia, zones which actively producing rice in Malaysia are using their own way of grading rice. Rice grading is important in determining rice quality and its subsequent price in the market. It is an important process applied in the rice production industry with the purpose of ensuring that the rice produced for the market meets the quality requirements of consumer. Two important aspects that need to be considered in determining rice grades are grading technique and determinants to be used for grading (usually referred as rice attributes). This article proposes the list of determinants to be used in grading Malaysian rice. Determinants were explored through combination of extensive literature review and series of interview with the domain experts and practitioners. The proposed determinants are believed to be beneficial to BERNAS in improving the current Malaysian rice grading process.

Producing a Documentary in the Third Grade: Reaching All Students through Movie Making

ERIC Educational Resources Information Center

Fehn, Bruce; Heckart, Kimberly

2013-01-01

This article details the work of third grade teacher, co-author Kim Heckart, as she engaged her students in making historical documentaries: a project that succeeded in reaching all of her third-grade students. For the last five years, Kim has required students to make historical documentaries. As her students produced these works, Kim conversed…

Neurocomputational account of memory and perception: Thresholded and graded signals in the hippocampus.

PubMed

Elfman, Kane W; Aly, Mariam; Yonelinas, Andrew P

2014-12-01

Recent evidence suggests that the hippocampus, a region critical for long-term memory, also supports certain forms of high-level visual perception. A seemingly paradoxical finding is that, unlike the thresholded hippocampal signals associated with memory, the hippocampus produces graded, strength-based signals in perception. This article tests a neurocomputational model of the hippocampus, based on the complementary learning systems framework, to determine if the same model can account for both memory and perception, and whether it produces the appropriate thresholded and strength-based signals in these two types of tasks. The simulations showed that the hippocampus, and most prominently the CA1 subfield, produced graded signals when required to discriminate between highly similar stimuli in a perception task, but generated thresholded patterns of activity in recognition memory. A threshold was observed in recognition memory because pattern completion occurred for only some trials and completely failed to occur for others; conversely, in perception, pattern completion always occurred because of the high degree of item similarity. These results offer a neurocomputational account of the distinct hippocampal signals associated with perception and memory, and are broadly consistent with proposals that CA1 functions as a comparator of expected versus perceived events. We conclude that the hippocampal computations required for high-level perceptual discrimination are congruous with current neurocomputational models that account for recognition memory, and fit neatly into a broader description of the role of the hippocampus for the processing of complex relational information. © 2014 Wiley Periodicals, Inc.

Production of orthophosphate suspension fertilizers from wet-process acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, T.M.; Burnell, J.R.

1984-01-01

For many years, the Tennessee Valley Authority (TVA) has worked toward development of suspension fertilizers. TVA has two plants for production of base suspension fertilizers from wet-process orthophosphoric acid. One is a demonstration-scale plant where a 13-38-0 grade base suspension is produced by a three-stage ammoniation process. The other is a new batch-type pilot plant which is capable of producing high-grade base suspensions of various ratios and grades from wet-process acid. In this batch plant, suspensions and solutions can also be produced from solid intermediates.

Single-step laser deposition of functionally graded coating by dual ‘wire powder’ or ‘powder powder’ feeding—A comparative study

NASA Astrophysics Data System (ADS)

Syed, Waheed Ul Haq; Pinkerton, Andrew J.; Liu, Zhu; Li, Lin

2007-07-01

The creation of iron-copper (Fe-Cu) alloys has practical application in improving the surface heat conduction and corrosion resistance of, for example, conformal cooling channels in steel moulds, but is difficult to achieve because the elements have got low inter-solubility and are prone to solidification cracking. Previous work by these authors has reported a method to produce a graded iron-nickel-copper coating in a single-step by direct diode laser deposition (DLD) of nickel wire and copper powder as a combined feedstock. This work investigates whether dual powder feeds can be used in that process to afford greater geometric flexibility and compares attributes of the 'nickel wire and copper powder' and 'nickel powder and copper powder' processes for deposition on a H13 tool steel substrate. In wire-powder deposition, a higher temperature developed in the melt pool causing a clad with a smooth gradient structure. The nickel powder in powder-powder deposition did not impart much heat into the melt pool so the melt pool solidified with sharp composition boundaries due to single metal melting in some parts. In wire-powder experiments, a graded structure was obtained by varying the flow rates of wire and powder. However, a graded structure was not realised in powder-powder experiments by varying either the feed or the directions. Reasons for the differences and flow patterns in the melt pools and their effect on final part properties of parts produced are discussed.

Functionally Graded Multifunctional Hybrid Composites for Extreme Environments

DTIC Science & Technology

2010-02-01

Develop multifunctional FGHC with multiple layers: a ceramic thermal barrier layer, a graded ceramic /metal composite (GCMeC) layer and a high...AFOSR-MURI Functionally Graded Hybrid Composites Actively Cooled PMC White (UIUC) FGHC Fabrication Team Graded Ceramic Metal Composites (GCMeC...Composites Fabrication and Characterization of Bulk Ceramic MAX Phase and MAX–Metal Composites AFOSR-MURI Functionally Graded Hybrid Composites Mn

Grading of Student's Attainment: Purposes and Functions.

ERIC Educational Resources Information Center

Lysne, Anders

1984-01-01

Traces the history of grading and discusses the complex problem of evaluation and grading of student achievement. Reviews the various reference measures and notes the type of functions grades are supposed to serve. Cites seven alternatives to traditional grading. Concludes that "grades are the tail that wags the dog." (BRR)

Increased Production of Food-Grade d-Tagatose from d-Galactose by Permeabilized and Immobilized Cells of Corynebacterium glutamicum, a GRAS Host, Expressing d-Galactose Isomerase from Geobacillus thermodenitrificans.

PubMed

Shin, Kyung-Chul; Sim, Dong-Hyun; Seo, Min-Ju; Oh, Deok-Kun

2016-11-02

The generally recognized as safe microorganism Corynebacterium glutamicum expressing Geobacillus thermodenitrificans d-galactose isomerase (d-GaI) was an efficient host for the production of d-tagatose, a functional sweetener. The d-tagatose production at 500 g/L d-galactose by the host was 1.4-fold higher than that by Escherichia coli expressing d-GaI. The d-tagatose-producing activity of permeabilized C. glutamicum (PCG) cells treated with 1% (w/v) Triton X-100 was 2.1-fold higher than that of untreated cells. Permeabilized and immobilized C. glutamicum (PICG) cells in 3% (w/v) alginate showed a 3.1-fold longer half-life at 50 °C and 3.1-fold higher total d-tagatose concentration in repeated batch reactions than PCG cells. PICG cells, which produced 165 g/L d-tagatose after 3 h, with a conversion of 55% (w/w) and a productivity of 55 g/L/h, showed significantly higher d-tagatose productivity than that reported for other cells. Thus, d-tagatose production by PICG cells may be an economical process to produce food-grade d-tagatose.

Correlation between standard plate count and somatic cell count milk quality results for Wisconsin dairy producers.

PubMed

Borneman, Darand L; Ingham, Steve

2014-05-01

The objective of this study was to determine if a correlation exists between standard plate count (SPC) and somatic cell count (SCC) monthly reported results for Wisconsin dairy producers. Such a correlation may indicate that Wisconsin producers effectively controlling sanitation and milk temperature (reflected in low SPC) also have implemented good herd health management practices (reflected in low SCC). The SPC and SCC results for all grade A and B dairy producers who submitted results to the Wisconsin Department of Agriculture, Trade, and Consumer Protection, in each month of 2012 were analyzed. Grade A producer SPC results were less dispersed than grade B producer SPC results. Regression analysis showed a highly significant correlation between SPC and SCC, but the R(2) value was very small (0.02-0.03), suggesting that many other factors, besides SCC, influence SPC. Average SCC (across 12 mo) for grade A and B producers decreased with an increase in the number of monthly SPC results (out of 12) that were ≤ 25,000 cfu/mL. A chi-squared test of independence showed that the proportion of monthly SCC results >250,000 cells/mL varied significantly depending on whether the corresponding SPC result was ≤ 25,000 or >25,000 cfu/mL. This significant difference occurred in all months of 2012 for grade A and B producers. The results suggest that a generally consistent level of skill exists across dairy production practices affecting SPC and SCC. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Adolescents born prematurely with isolated grade 2 haemorrhage in the early 1990s face increased risks of learning challenges.

PubMed

Vohr, Betty R; Allan, Walter; Katz, Karol H; Schneider, Karen; Tucker, Richard; Ment, Laura R

2014-10-01

To compare the impact of low-grade haemorrhage on neurocognitive function in 16-year-old adolescents born preterm, by grade of intraventricular haemorrhage, and term controls. We evaluated 338 preterm adolescents (birth weight 600-1250 g) for intelligence, executive function and memory tasks. Eleven had grade 3-4 haemorrhage, 44 had grade 2, 31 had grade 1, and 251 had no haemorrhage. Group comparisons were made with 102 term age-matched controls, and regression models used to identify the risk that low-grade haemorrhage posed for cognitive, executive function and memory deficits. Preterm adolescents with grade 2 haemorrhage had higher deficit rates of verbal intelligence, receptive vocabulary, phonemic fluency, cognitive flexibility and phonological fluency than preterm adolescents with grade 1 or no haemorrhage, compared with term controls. After excluding preterm adolescents with both grade 2 haemorrhage and cystic periventricular leukomalacia, those with isolated grade 2 haemorrhage remained at greater risk of cognitive and executive function deficits than term controls and of cognitive deficits than preterm adolescents with no haemorrhage. Our findings suggest that preterm adolescents born in the early 1990s with isolated grade 2 haemorrhage are at increased risk of learning challenges, including cognitive and executive function deficits. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

7 CFR 989.702 - Minimum grade standards for packed raisins.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RAISINS PRODUCED FROM GRAPES GROWN IN CALIFORNIA Quality Control § 989.702 Minimum grade standards for... washed with water to assure a wholesome product. (2) Grades. (i) Marketing Order Grade A is a quality of... paragraph. (ii) Marketing Order Grade B is the quality of the Cluster Seedless raisins that have similar...

STUB - a manufacturing system for producing rough dimension cuttings from low-grade lumber

Treesearch

Edwin L. Lucas; Charles J. Gatchell

1976-01-01

A rough mill manufacturing system for producing high-value furniture parts from low-value raw material is described. Called STUB (Short Temporarily Upgraded Boards), the system is designed to convert low-grade hardwood lumber into rough dimension parts. Computer simulation trials showed that more than one-third of the volume of parts produced from No. 2 Common oak...

Lumber grade-yields for factory-grade northern red oak sawlogs

Treesearch

James G. Schroeder; Leland F. Hanks

1967-01-01

A report on results of sawing 556 northern red oak sawlogs at four sawmills in West Virginia and Virginia, and the distribution of grades for the standard factory lumber produced. Tabular data on actual yield and curved grade-yield percentages.

One-Dimensional and Two-Dimensional Analytical Solutions for Functionally Graded Beams with Different Moduli in Tension and Compression

PubMed Central

Li, Xue; Dong, Jiao

2018-01-01

The material considered in this study not only has a functionally graded characteristic but also exhibits different tensile and compressive moduli of elasticity. One-dimensional and two-dimensional mechanical models for a functionally graded beam with a bimodular effect were established first. By taking the grade function as an exponential expression, the analytical solutions of a bimodular functionally graded beam under pure bending and lateral-force bending were obtained. The regression from a two-dimensional solution to a one-dimensional solution is verified. The physical quantities in a bimodular functionally graded beam are compared with their counterparts in a classical problem and a functionally graded beam without a bimodular effect. The validity of the plane section assumption under pure bending and lateral-force bending is analyzed. Three typical cases that the tensile modulus is greater than, equal to, or less than the compressive modulus are discussed. The result indicates that due to the introduction of the bimodular functionally graded effect of the materials, the maximum tensile and compressive bending stresses may not take place at the bottom and top of the beam. The real location at which the maximum bending stress takes place is determined via the extreme condition for the analytical solution. PMID:29772835

Gut Microbiota Mediates the Protective Effects of Dietary Capsaicin against Chronic Low-Grade Inflammation and Associated Obesity Induced by High-Fat Diet

PubMed Central

Kang, Chao; Wang, Bin; Kaliannan, Kanakaraju; Wang, Xiaolan; Lang, Hedong; Hui, Suocheng; Huang, Li; Zhang, Yong; Zhou, Ming; Chen, Mengting

2017-01-01

ABSTRACT Metabolic endotoxemia originating from dysbiotic gut microbiota has been identified as a primary mediator for triggering the chronic low-grade inflammation (CLGI) responsible for the development of obesity. Capsaicin (CAP) is the major pungent bioactivator in chili peppers and has potent anti-obesity functions, yet the mechanisms linking this effect to gut microbiota remain obscure. Here we show that mice fed a high-fat diet (HFD) supplemented with CAP exhibit lower levels of metabolic endotoxemia and CLGI associated with lower body weight gain. High-resolution responses of the microbiota were examined by 16S rRNA sequencing, short-chain fatty acid (SCFA) measurements, and phylogenetic reconstruction of unobserved states (PICRUSt) analysis. The results showed, among others, that dietary CAP induced increased levels of butyrate-producing Ruminococcaceae and Lachnospiraceae, while it caused lower levels of members of the lipopolysaccharide (LPS)-producing family S24_7. Predicted function analysis (PICRUSt) showed depletion of genes involved in bacterial LPS synthesis in response to CAP. We further identified that inhibition of cannabinoid receptor type 1 (CB1) by CAP also contributes to prevention of HFD-induced gut barrier dysfunction. Importantly, fecal microbiota transplantation experiments conducted in germfree mice demonstrated that dietary CAP-induced protection against HFD-induced obesity is transferrable. Moreover, microbiota depletion by a cocktail of antibiotics was sufficient to block the CAP-induced protective phenotype against obesity, further suggesting the role of microbiota in this context. Together, our findings uncover an interaction between dietary CAP and gut microbiota as a novel mechanism for the anti-obesity effect of CAP acting through prevention of microbial dysbiosis, gut barrier dysfunction, and chronic low-grade inflammation. PMID:28536285

[Correspondence analysis between traditional commercial specifications and quantitative quality indices of Notopterygii Rhizoma et Radix].

PubMed

Jiang, Shun-Yuan; Sun, Hong-Bing; Sun, Hui; Ma, Yu-Ying; Chen, Hong-Yu; Zhu, Wen-Tao; Zhou, Yi

2016-03-01

This paper aims to explore a comprehensive assessment method combined traditional Chinese medicinal material specifications with quantitative quality indicators. Seventy-six samples of Notopterygii Rhizoma et Radix were collected on market and at producing areas. Traditional commercial specifications were described and assigned, and 10 chemical components and volatile oils were determined for each sample. Cluster analysis, Fisher discriminant analysis and correspondence analysis were used to establish the relationship between the traditional qualitative commercial specifications and quantitative chemical indices for comprehensive evaluating quality of medicinal materials, and quantitative classification of commercial grade and quality grade. A herb quality index (HQI) including traditional commercial specifications and chemical components for quantitative grade classification were established, and corresponding discriminant function were figured out for precise determination of quality grade and sub-grade of Notopterygii Rhizoma et Radix. The result showed that notopterol, isoimperatorin and volatile oil were the major components for determination of chemical quality, and their dividing values were specified for every grade and sub-grade of the commercial materials of Notopterygii Rhizoma et Radix. According to the result, essential relationship between traditional medicinal indicators, qualitative commercial specifications, and quantitative chemical composition indicators can be examined by K-mean cluster, Fisher discriminant analysis and correspondence analysis, which provide a new method for comprehensive quantitative evaluation of traditional Chinese medicine quality integrated traditional commodity specifications and quantitative modern chemical index. Copyright© by the Chinese Pharmaceutical Association.

Dispersion relations of elastic waves in one-dimensional piezoelectric/piezomagnetic phononic crystal with functionally graded interlayers.

PubMed

Guo, Xiao; Wei, Peijun; Lan, Man; Li, Li

2016-08-01

The effects of functionally graded interlayers on dispersion relations of elastic waves in a one-dimensional piezoelectric/piezomagnetic phononic crystal are studied in this paper. First, the state transfer equation of the functionally graded interlayer is derived from the motion equation by the reduction of order (from second order to first order). The transfer matrix of the functionally graded interlayer is obtained by solving the state transfer equation with the spatial-varying coefficient. Based on the transfer matrixes of the piezoelectric slab, the piezomagnetic slab and the functionally graded interlayers, the total transfer matrix of a single cell is obtained. Further, the Bloch theorem is used to obtain the resultant dispersion equations of in-plane and anti-plane Bloch waves. The dispersion equations are solved numerically and the numerical results are shown graphically. Five kinds of profiles of functionally graded interlayers between a piezoelectric slab and a piezomagnetic slab are considered. It is shown that the functionally graded interlayers have evident influences on the dispersion curves and the band gaps. Copyright © 2016 Elsevier B.V. All rights reserved.

Temperature dependence of the multistability of lactose utilization network of Escherichia coli

NASA Astrophysics Data System (ADS)

Nepal, Sudip; Kumar, Pradeep

Biological systems are capable of producing multiple states out of a single set of inputs. Multistability acts like a biological switch that allows organisms to respond differently to different environmental conditions and hence plays an important role in adaptation to changing environment. One of the widely studied gene regulatory networks underlying the metabolism of bacteria is the lactose utilization network, which exhibits a multistable behavior as a function of lactose concentration. We have studied the effect of temperature on multistability of the lactose utilization network at various concentrations of thio-methylgalactoside (TMG), a synthetic lactose. We find that while the lactose utilization network exhibits a bistable behavior for temperature T >20° C , a graded response arises for temperature T <=20° C. Furthermore, we construct a phase diagram of the graded and bistable response of lactose utilization network as a function of temperature and TMG concentration. Our results suggest that environmental conditions, in this case temperature, can alter the nature of cellular regulation of metabolism.

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Dissolving Sulfite Subcategory... dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or pollutant property Kg... dissolving sulfite pulp facilities where viscose grade pulp is produced] Pollutant or pollutant property Kg...

Differential Item Functioning by Gender on a Large-Scale Science Performance Assessment: A Comparison across Grade Levels.

ERIC Educational Resources Information Center

Holweger, Nancy; Taylor, Grace

The fifth-grade and eighth-grade science items on a state performance assessment were compared for differential item functioning (DIF) due to gender. The grade 5 sample consisted of 8,539 females and 8,029 males and the grade 8 sample consisted of 7,477 females and 7,891 males. A total of 30 fifth grade items and 26 eighth grade items were…

Effects of climate change on the economic output of the Longjing-43 tea tree, 1972-2013.

PubMed

Lou, Weiping; Sun, Shanlei; Wu, Lihong; Sun, Ke

2015-05-01

Based on phenological and economic output models established and meteorological data from 1972 to 2013, changes in the phenology, frost risk, and economic output of the Longjing-43 tea tree in the Yuezhou Longjing tea production area of China were evaluated. As the local climate has changed, the beginning dates of tea bud and leaf plucking of this cultivar in all five counties studied has advanced significantly by -1.28 to -0.88 days/decade, with no significant change in the risk of frost. The main tea-producing stages in the tea production cycle include the plucking periods for superfine, grade 1, and grade 2 buds and leaves. Among the five bud and leaf grades, the economic output of the plucking periods for superfine and grade 1 decreased significantly, that for grade 2 showed no significant change, and those for grades 3 and 4 increased significantly. The economic output of large-area tea plantations employing an average of 45 workers per hectare and producing superfine to grade 2 buds and leaves were significantly reduced by 6,745-8,829 yuan/decade/ha, depending on the county. Those tea farmers who planted tea trees on their own small land holdings and produced superfine to grade 4 tea buds and leaves themselves experienced no significant decline in economic output.

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... GUIDELINES AND STANDARDS (CONTINUED) THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Dissolving Sulfite... biocides: Subpart D [NSPS for dissolving sulfite pulp facilities where nitration grade pulp is produced... all times. Subpart D [NSPS for dissolving sulfite pulp facilities where viscose grade pulp is produced...

Mechanical and biological properties of the micro-/nano-grain functionally graded hydroxyapatite bioceramics for bone tissue engineering.

PubMed

Zhou, Changchun; Deng, Congying; Chen, Xuening; Zhao, Xiufen; Chen, Ying; Fan, Yujiang; Zhang, Xingdong

2015-08-01

Functionally graded materials (FGM) open the promising approach for bone tissue repair. In this study, a novel functionally graded hydroxyapatite (HA) bioceramic with micrograin and nanograin structure was fabricated. Its mechanical properties were tailored by composition of micrograin and nanograin. The dynamic mechanical analysis (DMA) indicated that the graded HA ceramics had similar mechanical property compared to natural bones. Their cytocompatibility was evaluated via fluorescent microscopy and MTT colorimetric assay. The viability and proliferation of rabbit bone marrow mesenchymal stem cells (BMSCs) on ceramics indicated that this functionally graded HA ceramic had better cytocompatibility than conventional HA ceramic. This study demonstrated that functionally graded HA ceramics create suitable structures to satisfy both the mechanical and biological requirements of bone tissues. Copyright © 2015 Elsevier Ltd. All rights reserved.

Lumber recovery from ponderosa pine in western Montana.

Treesearch

Marlin E. Plank

1982-01-01

Lumber grade yields and recovery ratios are shown for a sample of ponderosa pine (Pinus ponderosa Dougl. ex Laws.) in western Montana. About 9 percent of the lumber produced was in Select grades, 48 percent in Shop grades, and 43 percent in Common grades. Information on log scale and yield is presented in tables by log grade and diameter class....

40 CFR 430.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORY Dissolving Sulfite Subcategory § 430.42 Effluent limitations representing the degree of effluent... limitations for dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or... [BPT effluent limitations for dissolving sulfite pulp facilities where viscose grade pulp is produced...

40 CFR 430.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORY Dissolving Sulfite Subcategory § 430.42 Effluent limitations representing the degree of effluent... limitations for dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or... [BPT effluent limitations for dissolving sulfite pulp facilities where viscose grade pulp is produced...

40 CFR 430.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Dissolving Sulfite Subcategory § 430.42 Effluent limitations representing the degree of effluent reduction... limitations for dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or... [BPT effluent limitations for dissolving sulfite pulp facilities where viscose grade pulp is produced...

40 CFR 430.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORY Dissolving Sulfite Subcategory § 430.42 Effluent limitations representing the degree of effluent... limitations for dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or... [BPT effluent limitations for dissolving sulfite pulp facilities where viscose grade pulp is produced...

40 CFR 430.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Dissolving Sulfite Subcategory § 430.42 Effluent limitations representing the degree of effluent reduction... limitations for dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or... [BPT effluent limitations for dissolving sulfite pulp facilities where viscose grade pulp is produced...

Evaluating Sermons: The Function of Grades in Teaching Preaching

ERIC Educational Resources Information Center

Helsel, Carolyn Browning

2017-01-01

What are grades doing in a homiletics classroom? This article traces the function of grades through the broader history of the educational system in the United States and then makes suggestions for how grades can be used more effectively in teaching preaching. Beginning in the nineteenth century, teachers used grades to rank and motivate students,…

ALBI versus Child-Pugh grading systems for liver function in patients with hepatocellular carcinoma.

PubMed

Na, Seong K; Yim, Sun Y; Suh, Sang J; Jung, Young K; Kim, Ji H; Seo, Yeon S; Yim, Hyung J; Yeon, Jong E; Byun, Kwan S; Um, Soon H

2018-04-01

The prognostic performance of the albumin-bilirubin (ALBI) grade in hepatocellular carcinoma (HCC) as an objective method of assessing liver function was investigated. Data from 2099 patients with HCC in Korea were collected and analyzed retrospectively. The discriminative performance of ALBI grade was compared with Child-Pugh (C-P) grade for different stages or treatments. The median follow up duration was 16.2 months (range: 1.0-124.9). The median survival times were 49.7 months for C-P grade A (65.8%), 12.4 months for C-P grade B (25.5%), and 4.2 months for C-P grade C (8.6%) (P < 0.001). The median survival times were 84.2 months for ALBI grade 1 (32.8%), 25.5 months for ALBI grade 2 (53.5%), and 7.7 months for ALBI grade 3 (13.7%) (P < 0.001). In early UICC stages, ALBI grade showed better discriminative performance than C-P grade. In curative treatments, ALBI grade also showed better discriminative performance than C-P grade (Harrell's C: 0.624 (C-P grade) vs 0.667 [ALBI grade]). ALBI grade provided better prognostic performance in survival analysis and better distribution of the grades than C-P grade in HCC, suggesting that ALBI grade could be a good alternative grading system for liver function in patients with HCC. © 2018 Wiley Periodicals, Inc.

[Modulator effect of socio-emotional variables on training in elaboration strategies in Compulsory Secondary Education (CSE): paraphrase and applications].

PubMed

Martín-Antón, Luis Jorge; Carbonero Martín, Miguel Angel; Román Sánchez, José María

2012-02-01

The purpose of this work is to verify the modulation of motivation, self-concept, and causal attributions in the efficacy of a training program of strategies to elaborate information in the stage of Compulsory Secondary Education (CSE). We selected 328 students from CSE, 179 from second grade and 149 from fourth grade, and three measurement moments: pretest, posttest, and follow-up. The results indicate greater use of learning strategies by students with higher intrinsic motivation, in contrast to students with higher extrinsic motivation, who use learning strategies less frequently. With regard to self-concept, the results differ as a function of the course. In second grade, we found modulation of the variable Academic self-concept, whereas in fourth grade, such modulation is produced by General self-concept and Private self-concept. In general, there is a tendency towards more enduring significant improvements in students with medium and high self-concept, especially in their perception of the use of strategies or in complex tasks that involve relating the contents to be learned with experiences from their daily life. However, students with low self-concept significantly improve strategies associated with learning how to perform specific tasks.

Development of Ultraviolet (UV) Radiation Protective Fabric Using Combined Electrospinning and Electrospraying Technique

NASA Astrophysics Data System (ADS)

Sinha, Mukesh Kumar; Das, B. R.; Kumar, Kamal; Kishore, Brij; Prasad, N. Eswara

2017-06-01

The article reports a novel technique for functionization of nanoweb to develop ultraviolet (UV) radiation protective fabric. UV radiation protection effect is produced by combination of electrospinning and electrospraying technique. A nanofibrous web of polyvinylidene difluoride (PVDF) coated on polypropylene nonwoven fabric is produced by latest nanospider technology. Subsequently, web is functionalized by titanium dioxide (TiO2). The developed web is characterized for evaluation of surface morphology and other functional properties; mechanical, chemical, crystalline and thermal. An optimal (judicious) nanofibre spinning condition is achieved and established. The produced web is uniformly coated by defect free functional nanofibres in a continuous form of useable textile structural membrane for ultraviolet (UV) protective clothing. This research initiative succeeds in preparation and optimization of various nanowebs for UV protection. Field Emission Scanning Electron Microscope (FESEM) result reveals that PVDF webs photo-degradative behavior is non-accelerated, as compared to normal polymeric grade fibres. Functionalization with TiO2 has enhanced the photo-stability of webs. The ultraviolet protection factor of functionalized and non-functionalized nanowebs empirically evaluated to be 65 and 24 respectively. The developed coated layer could be exploited for developing various defence, para-military and civilian UV protective light weight clothing (tent, covers and shelter segments, combat suit, snow bound camouflaging nets). This research therefore, is conducted in an attempt to develop a scientific understanding of PVDF fibre coated webs for photo-degradation and applications for defence protective textiles. This technological research in laboratory scale could be translated into bulk productionization.

Functionally Graded Adhesives for Composite Joints

NASA Technical Reports Server (NTRS)

Stapleton, Scott E.; Waas, Anthony M.; Arnold, Steven M.

2012-01-01

Adhesives with functionally graded material properties are being considered for use in adhesively bonded joints to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. An enhanced joint finite element, which uses an analytical formulation to obtain exact shape functions, is used to model the joint. Furthermore, proof of concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint.

Deciphering the role of a coleopteran steering muscle via free flight stimulation.

PubMed

Sato, Hirotaka; Vo Doan, Tat Thang; Kolev, Svetoslav; Huynh, Ngoc Anh; Zhang, Chao; Massey, Travis L; van Kleef, Joshua; Ikeda, Kazuo; Abbeel, Pieter; Maharbiz, Michel M

2015-03-16

Testing hypotheses of neuromuscular function during locomotion ideally requires the ability to record cellular responses and to stimulate the cells being investigated to observe downstream behaviors [1]. The inability to stimulate in free flight has been a long-standing hurdle for insect flight studies. The miniaturization of computation and communication technologies has delivered ultra-small, radio-enabled neuromuscular recorders and stimulators for untethered insects [2-8]. Published stimulation targets include the areas in brain potentially responsible for pattern generation in locomotion [5], the nerve chord for abdominal flexion [9], antennal muscles [2, 10], and the flight muscles (or their excitatory junctions) [7, 11-13]. However, neither fine nor graded control of turning has been demonstrated in free flight, and responses to the stimulation vary widely [2, 5, 7, 9]. Technological limitations have precluded hypotheses of function validation requiring exogenous stimulation during flight. We investigated the role of a muscle involved in wing articulation during flight in a coleopteran. We set out to identify muscles whose stimulation produced a graded turning in free flight, a feat that would enable fine steering control not previously demonstrated. We anticipated that gradation might arise either as a function of the phase of muscle firing relative to the wing stroke (as in the classic fly b1 muscle [14, 15] or the dorsal longitudinal and ventral muscles of moth [16]), or due to regulated tonic control, in which phase-independent summation of twitch responses produces varying amounts of force delivered to the wing linkages [15, 17, 18]. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Arguments and Data in Favor of Minimum Grading

ERIC Educational Resources Information Center

Carifio, James; Carey, Theodore

2013-01-01

The arguments and for and against minimum grading systems have grown increasingly more intense and acrimonious in the past decade. However, there has been an absence of empirical data, theory and clear comparative analyses of conflicting points of view. Critics of minimum grading contend that the practice will produce grade inflation and social…

Biosurfactants, bioemulsifiers and exopolysaccharides from marine microorganisms.

PubMed

Satpute, Surekha K; Banat, Ibrahim M; Dhakephalkar, Prashant K; Banpurkar, Arun G; Chopade, Balu A

2010-01-01

Marine biosphere offers wealthy flora and fauna, which represents a vast natural resource of imperative functional commercial grade products. Among the various bioactive compounds, biosurfactant (BS)/bioemulsifiers (BE) are attracting major interest and attention due to their structural and functional diversity. The versatile properties of surface active molecules find numerous applications in various industries. Marine microorganisms such as Acinetobacter, Arthrobacter, Pseudomonas, Halomonas, Myroides, Corynebacteria, Bacillus, Alteromonas sp. have been studied for production of BS/BE and exopolysaccharides (EPS). Due to the enormity of marine biosphere, most of the marine microbial world remains unexplored. The discovery of potent BS/BE producing marine microorganism would enhance the use of environmental biodegradable surface active molecule and hopefully reduce total dependence or number of new application oriented towards the chemical synthetic surfactant industry. Our present review gives comprehensive information on BS/BE which has been reported to be produced by marine microorganisms and their possible potential future applications.

A Comparison of Four Techniques for Producing High-Grade Furniture Core Material From Low-Grade Yellow-Poplar

Treesearch

Philip A. Araman

1978-01-01

Four Methods of converting low-grade yellow-poplar lumber into high-grade furniture core material (lumber core) were compared. High-grade core material is used in tops, shelves, doors, and drawer fronts and only minor defects are allowed. Three gang-rip first and the conventional crosscut-first manufacturing sequences were evaluated in combination with 1 Common, 2A...

Processing, microstructure and mechanics of functionally graded Al A359/SiC(p) composite

NASA Astrophysics Data System (ADS)

Rodriguez-Castro, Ramon

2000-11-01

Metal matrix composites (MMCs) have great promise for high temperature, high strength, wear resistant applications. However, their brittleness has limited their use in load bearing applications. Functionally graded MMCs with a reinforcement concentration higher on the surface than in the interior offer new opportunities, as these materials will have high surface hardness as well as high resistance to crack growth towards the interior. In this dissertation the processing and mechanical properties of a functionally graded MMC are investigated. Rectangular blocks (100 mmx60 mmx50 mm) of functionally graded SiC particulate reinforced aluminum A359 matrix composite were prepared by centrifugal casting techniques. The reinforcement volume fraction profiles varied as the centrifugal force was applied, owing to the different densities of Al and SiC. The casting at 1300 rpm (angular velocity) had a well-mixed, refined microstructure with the maximum SiC volume fraction of 44% near the outer surface of the blocks. This surface exhibited an elevated hardness. The effect of SiC particulate reinforcement on strengthening of A359 Al alloy was experimentally studied by tensile testing specimens prepared from the cast blocks. There was a continuous increase in tensile and yield strength with increasing SiC volume fractions in the range of 0.20 to 0.30. On the contrary, there was a reduction in tensile and yield strength for SiC concentrations in the range of 0.30 to 0.40. The elasticity modulus increased with increasing SiC volume fractions in the whole reinforcement range (0.20--0.40). Fractographic analysis by SEM revealed a ductile failure process of void growth in the matrix, but the amount of the void growth was less when the SiC concentration was higher. SEM also revealed SiC reinforcement fracture and decohesion, with the particle fracture increasing with the particle concentration. Appropriate flat specimens with a continuously graded microstructure for fracture mechanics testing were machined from the cast blocks. No published work has reported specimens of similar characteristics (size of the specimens and continuous reinforcement gradation). Fracture mechanics of the composite specimens with the crack parallel to the gradation in elastic properties was studied to investigate the effect of the nonhomogeneous microstructure on fracture toughness. Fatigue pre-cracking was used and a limited amount of fatigue crack propagation data was gathered. Low values of DeltaKth and increased crack growth resistance in the Paris region were observed for the functionally graded composite compared to a homogeneous 20 vol% composite. R-curve (KR) behavior of fracture was investigated in the functionally graded composite. At elevated SiC concentrations (low values of crack length), limited dissipation of energy by restrained plastic deformation of the matrix at the crack tip produced low fracture toughness values. On the contrary, at longer crack lengths SiC content decreased and there was more absorption of energy, resulting in higher fracture toughness values. In addition, the crack growth resistance behavior of the FGM composite was compared to the corresponding behavior of an Al A359/SiCp 20 vol% homogeneous composite. The latter exhibited a declining KR-curve behavior whereas the FGM composite displayed an increasing KR-curve behavior. Consequently, this increasing crack growth resistance behavior displayed by the functionally graded Al A359/SiCp composite shows that tailored changes in the microstructure could circumvent the low toughness inherent in MMCs.

Surgical inflammatory stress: the embryo takes hold of the reins again

PubMed Central

2013-01-01

The surgical inflammatory response can be a type of high-grade acute stress response associated with an increasingly complex trophic functional system for using oxygen. This systemic neuro-immune-endocrine response seems to induce the re-expression of 2 extraembryonic-like functional axes, i.e. coelomic-amniotic and trophoblastic-yolk-sac-related, within injured tissues and organs, thus favoring their re-development. Accordingly, through the up-regulation of two systemic inflammatory phenotypes, i.e. neurogenic and immune-related, a gestational-like response using embryonic functions would be induced in the patient’s injured tissues and organs, which would therefore result in their repair. Here we establish a comparison between the pathophysiological mechanisms that are produced during the inflammatory response and the physiological mechanisms that are expressed during early embryonic development. In this way, surgical inflammation could be a high-grade stress response whose pathophysiological mechanisms would be based on the recapitulation of ontogenic and phylogenetic-related functions. Thus, the ultimate objective of surgical inflammation, as a gestational process, is creating new tissues/organs for repairing the injured ones. Since surgical inflammation and early embryonic development share common production mechanisms, the factors that hamper the wound healing reaction in surgical patients could be similar to those that impair the gestational process. PMID:23374964

The mineralogy of bauxite for producing smelter-grade alumina

NASA Astrophysics Data System (ADS)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

Assessment of Diastolic Function in Single Ventricle Patients Following the Fontan Procedure

PubMed Central

Margossian, Renee; Sleeper, Lynn A.; Pearson, Gail D.; Barker, Piers C.; Mertens, Luc; Quartermain, Michael D.; Su, Jason T.; Shirali, Girish; Chen, Shan; Colan, Steven D.

2016-01-01

Objectives Patients with functional single ventricles (FSV) following the Fontan procedure have abnormal cardiac mechanics. We sought to determine factors that influence diastolic function and to describe associations of diastolic function with current clinical status. Methods Echocardiograms were obtained as part of the Pediatric Heart Network Fontan Cross-Sectional Study. Diastolic function grade (DFG) was assessed as normal (grade 0), impaired relaxation (grade 1), pseudonormalization (grade 2), restrictive (grade 3). Studies were also classified dichotomously (restrictive pattern present or absent). Relationships between DFG and pre-Fontan variables (e.g., ventricular morphology, age at Fontan, history of volume-unloading surgery), and current status (e.g., systolic function, valvar regurgitation, exercise performance) were explored. Results DFG was calculable in 326/546 subjects (60%); mean age = 11.7±3.3 years. Overall, 32% of patients had grade 0, 9% grade 1, 37% grade 2, and 22% grade 3. Although there was no association between ventricular morphology and DFG, there was an association between ventricular morphology and E’, which was lowest in those with right ventricular morphology (p<.001); this association remained significant when using z-scores adjusted for age (p=<.001). DFG was associated with achieving maximal effort on exercise testing (p=.004); the majority (64%) of those not achieving maximal effort had DFG 2 or 3.No additional significant associations of DFG with laboratory or clinical measures were identified. Conclusion Assessment of diastolic function by current algorithms results in a high percentage of patients with abnormal DFG, but we found few clinically or statistically significant associations. This may imply a lack of impact of abnormal diastolic function upon clinical outcome in this cohort, or may indicate that the methodology may not be applicable to pediatric FSV patients. PMID:27624592

Machine grading of lumber : practical concerns for lumber producers

Treesearch

William L. Galligan; Kent A. McDonald

2000-01-01

Machine lumber grading has been applied in commercial operations in North America since 1963, and research has shown that machine grading can improve the efficient use of wood. However, industry has been reluctant to apply research findings without clear evidence that the change from visual to machine grading will be a profitable one. For instance, mill managers need...

[Analysis of commercial grades of Schisandrae Sphenantherae Fructus based on schisantherin].

PubMed

Wang, Zhen-Heng; Jin, Ling; Ma, Yi; Cui, Zhi-Jia; Li, Qian; Huang, De-Dong

2017-10-01

Schisandrae Sphenantherae Fructus, from different producing areas, were collected and divided into three grades. The moisture content and total ash were determined on the basis of the pharmacopoeia method, and schisantherin was determined by UPLC. The study is aimed to find the commercial specifications and grades of Schisandrae Sphenantherae Fructus based on schisantherin content. The results showed that the content of water, total ash and schisantherin of Schisandrae Sphenantherae Fructus from different producing areas qualified. There was no significant difference between different grades of schisandrin content, but the second-class were the highest, first-class and third-class were lower. It means that schisandrin content is not positive correlation to commercial grade. The study will be helpful to the production, management and clinical practice of Schisandrae Sphenantherae Fructus. Copyright© by the Chinese Pharmaceutical Association.

Comparative Incidence of Phlebitis Due to Buffered Cephalothin, Cephapirin, and Cefamandole

PubMed Central

Berger, Stephen; Ernst, E. Chaim; Barza, Michael

1976-01-01

Buffered cephalothin, cefamandole, and cephapirin were compared with respect to their tendency to produce phlebitis. Two grams of each agent was administered every 6 h for 4 days to 12 healthy volunteers in a double-blind crossover fashion. Approximately 50% of intravenous sites developed mild (grade 1) phlebitis and 25% developed moderate (grade 2) phlebitis. The frequency of grade 1 inflammation did not differ significantly among the three cephalosporins. The proportion of individuals eventually exhibiting grade 2 phelebitis was highest with cefamandole, lowest with cephalothin (P = 0.07), and intermediate with cephapirin; however, cephapirin required a substantially greater number of doses to produce grade 2 phelebitis than did the other two drugs. These findings, together with the results of other reports, suggest that interpretation of the phlebitogenic potential of these antibiotics must be made with caution. PMID:5053

Method to produce succinic acid from raw hydrolysates

DOEpatents

Donnelly, Mark I.; Sanville-Millard, Cynthia Y.; Nghiem, Nhuan Phu

2004-06-01

A method for producing succinic acid from industrial-grade hydrolysates is provided, comprising supplying an organism that contains mutations for the genes ptsG, pflB, and ldhA, allowing said organism to accumulate biomass, and allowing said organism to metabolize the hydrolysate. Also provided is a bacteria mutant characterized in that it produces succinic acid from substrate contained in industrial-grade hydrolysate in a ratio of between 0.6:1 and 1.3:1 succinic acid to substrate.

40 CFR 421.226 - Pretreatment standards for new sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... molybdenum produced Arsenic 27.120 12.097 Chromium 7.219 2.927 Lead 5.463 2.536 Nickel 10.731 7.219 Iron 23... technical grade molybdenum plus vanadium plus pure grade molybdenum produced Arsenic 80.952 36.108 Chromium...] [Reserved] Ammonia (as N) 24114.000 10600.000 (c) Vanadium decomposition wet air pollution control. PSNS for...

40 CFR 421.226 - Pretreatment standards for new sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... molybdenum produced Arsenic 27.120 12.097 Chromium 7.219 2.927 Lead 5.463 2.536 Nickel 10.731 7.219 Iron 23... technical grade molybdenum plus vanadium plus pure grade molybdenum produced Arsenic 80.952 36.108 Chromium...] [Reserved] Ammonia (as N) 24114.000 10600.000 (c) Vanadium decomposition wet air pollution control. PSNS for...

7 CFR 58.138 - Quality testing of milk from new producers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a plant for the first time or resuming shipment to a plant after a period of non-shipment. The milk... 7 Agriculture 3 2011-01-01 2011-01-01 false Quality testing of milk from new producers. 58.138... (CONTINUED) GRADING AND INSPECTION, GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF...

7 CFR 58.138 - Quality testing of milk from new producers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a plant for the first time or resuming shipment to a plant after a period of non-shipment. The milk... 7 Agriculture 3 2010-01-01 2010-01-01 false Quality testing of milk from new producers. 58.138... (CONTINUED) GRADING AND INSPECTION, GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF...

46 CFR 35.30-35 - Spark producing devices-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... water; (iv) Contain Grade E liquid and are closed and secured; or (v) Are spaces in which flammable... § 35.30-35 Spark producing devices—TB/ALL. (a) Where Grades A, B, C, and D liquid cargoes are involved... oil tanks, cargo pumprooms, or enclosed spaces immediately above or adjacent to bulk cargo tanks...

46 CFR 35.30-35 - Spark producing devices-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... water; (iv) Contain Grade E liquid and are closed and secured; or (v) Are spaces in which flammable... § 35.30-35 Spark producing devices—TB/ALL. (a) Where Grades A, B, C, and D liquid cargoes are involved... oil tanks, cargo pumprooms, or enclosed spaces immediately above or adjacent to bulk cargo tanks...

46 CFR 35.30-35 - Spark producing devices-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... water; (iv) Contain Grade E liquid and are closed and secured; or (v) Are spaces in which flammable... § 35.30-35 Spark producing devices—TB/ALL. (a) Where Grades A, B, C, and D liquid cargoes are involved... oil tanks, cargo pumprooms, or enclosed spaces immediately above or adjacent to bulk cargo tanks...

46 CFR 35.30-35 - Spark producing devices-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... water; (iv) Contain Grade E liquid and are closed and secured; or (v) Are spaces in which flammable... § 35.30-35 Spark producing devices—TB/ALL. (a) Where Grades A, B, C, and D liquid cargoes are involved... oil tanks, cargo pumprooms, or enclosed spaces immediately above or adjacent to bulk cargo tanks...

46 CFR 35.30-35 - Spark producing devices-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... water; (iv) Contain Grade E liquid and are closed and secured; or (v) Are spaces in which flammable... § 35.30-35 Spark producing devices—TB/ALL. (a) Where Grades A, B, C, and D liquid cargoes are involved... oil tanks, cargo pumprooms, or enclosed spaces immediately above or adjacent to bulk cargo tanks...

The Contribution of Executive Functions to Narrative Writing in Fourth Grade Children

ERIC Educational Resources Information Center

Drijbooms, Elise; Groen, Margriet A.; Verhoeven, Ludo

2015-01-01

The present study investigated the contribution of executive functions to narrative writing in fourth grade children, and evaluated to what extent executive functions contribute differentially to different levels of narrative composition. The written skills of 102 Dutch children in fourth grade were assessed using a narrative picture-elicitation…

Functional Expression of an Orchid Fragrance Gene in Lactococcus lactis

PubMed Central

Song, Adelene Ai Lian; Abdullah, Janna O.; Abdullah, Mohd Puad; Shafee, Norazizah; Rahim, Raha A.

2012-01-01

Vanda Mimi Palmer (VMP), an orchid hybrid of Vanda tesselata and Vanda Tan Chay Yan is a highly scented tropical orchid which blooms all year round. Previous studies revealed that VMP produces a variety of isoprenoid volatiles during daylight. Isoprenoids are well known to contribute significantly to the scent of most fragrant plants. They are a large group of secondary metabolites which may possess valuable characteristics such as flavor, fragrance and toxicity and are produced via two pathways, the mevalonate (MVA) pathway or/and the 2-C-methyl-D-erythritol-4-phosphate (MEP) pathway. In this study, a sesquiterpene synthase gene denoted VMPSTS, previously isolated from a floral cDNA library of VMP was cloned and expressed in Lactococcus lactis to characterize the functionality of the protein. L. lactis, a food grade bacterium which utilizes the mevalonate pathway for isoprenoid production was found to be a suitable host for the characterization of plant terpene synthases. Through recombinant expression of VMPSTS, it was revealed that VMPSTS produced multiple sesquiterpenes and germacrene D dominates its profile. PMID:22408409

Assessment of Liver Function in Patients With Hepatocellular Carcinoma: A New Evidence-Based Approach—The ALBI Grade

PubMed Central

Johnson, Philip J.; Berhane, Sarah; Kagebayashi, Chiaki; Satomura, Shinji; Teng, Mabel; Reeves, Helen L.; O'Beirne, James; Fox, Richard; Skowronska, Anna; Palmer, Daniel; Yeo, Winnie; Mo, Frankie; Lai, Paul; Iñarrairaegui, Mercedes; Chan, Stephen L.; Sangro, Bruno; Miksad, Rebecca; Tada, Toshifumi; Kumada, Takashi; Toyoda, Hidenori

2015-01-01

Purpose Most patients with hepatocellular carcinoma (HCC) have associated chronic liver disease, the severity of which is currently assessed by the Child-Pugh (C-P) grade. In this international collaboration, we identify objective measures of liver function/dysfunction that independently influence survival in patients with HCC and then combine these into a model that could be compared with the conventional C-P grade. Patients and Methods We developed a simple model to assess liver function, based on 1,313 patients with HCC of all stages from Japan, that involved only serum bilirubin and albumin levels. We then tested the model using similar cohorts from other geographical regions (n = 5,097) and other clinical situations (patients undergoing resection [n = 525] or sorafenib treatment for advanced HCC [n = 1,132]). The specificity of the model for liver (dys)function was tested in patients with chronic liver disease but without HCC (n = 501). Results The model, the Albumin-Bilirubin (ALBI) grade, performed at least as well as the C-P grade in all geographic regions. The majority of patients with HCC had C-P grade A disease at presentation, and within this C-P grade, ALBI revealed two classes with clearly different prognoses. Its utility in patients with chronic liver disease alone supported the contention that the ALBI grade was indeed an index of liver (dys)function. Conclusion The ALBI grade offers a simple, evidence-based, objective, and discriminatory method of assessing liver function in HCC that has been extensively tested in an international setting. This new model eliminates the need for subjective variables such as ascites and encephalopathy, a requirement in the conventional C-P grade. PMID:25512453

Lumber grade recoverey from Hawaii-grown robusta Eucalyptus logs

Treesearch

Roger G. Skolmen

1970-01-01

In part to supplement meager data on lumber grade yield of Hawaii-grown timber, 30 robusta eucalyptus logs were shipped to a Michigan sawmill for processing. The logs were from 12 trees in three different stands. The lumber produced was graded according to National Hardwood Lumber Association standards. The sample was too small to provide a basis for predicting grade...

Grading options for western hemlock "pulpwood" logs from southeastern Alaska.

Treesearch

David W. Green; Kent A. McDonald; John Dramm; Kenneth Kilborn

Properties and grade yield are estimated for structural lumber produced from No. 3, No. 4, and low-end No. 2 grade western hemlock logs of the type previously used primarily for the production of pulp chips. Estimates are given for production in the Structural Framing, Machine Stress Rating, and Laminating Stock grading systems. The information shows that significant...

Estimating the Effect on Grades of Using Multiple-Choice versus Constructive-Response Questions: Data from the Classroom

ERIC Educational Resources Information Center

Hickson, Stephen; Reed, W. Robert; Sander, Nicholas

2012-01-01

This study investigates the degree to which grades based solely on constructed-response (CR) questions differ from grades based solely on multiple-choice (MC) questions. If CR questions are to justify their higher costs, they should produce different grade outcomes than MC questions. We use a data set composed of thousands of observations on…

The natural limb is best: joint preservation and reconstruction by distraction osteogenesis for high-grade juxta-articular osteosarcomas.

PubMed

Tsuchiya, Hiroyuki; Abdel-Wanis, Mohamed E; Kitano, Shinji; Sakurakichi, Keisuke; Yamashiro, Teruhisa; Tomita, Katsuro

2002-01-01

This paper introduces an innovative technique of highly conservative limb-saving surgery for juxta-articular osteosarcoma. This technique consists of marginal tumour excision, joint preservation and reconstruction by distraction osteogenesis. Ten patients, with a mean age of 19.5 years and high-grade osteosarcoma, underwent this procedure. The distal femur and proximal tibia were affected in five patients each. After effective pre-operative chemotherapy, the tumour was excised with preservation of the epiphysis, the articular surface and the maximun amount of healthy soft tissue. This was followed by application of an external fixator. Bone transport was performed for seven patients and shortening-distraction for three. The limb function was rated excellent in seven patients, good in one and fair in two. At the final follow-up, three patients were dead after a mean of 25.3 months while seven patients remained free of disease with a mean follow-up of 55.4 months. Joint preservation and biological reconstruction through distraction osteogenesis can produce excellent and long-lasting functional results.

Design of Capillary Flows with Spatially Graded Porous Films

NASA Astrophysics Data System (ADS)

Joung, Young Soo; Figliuzzi, Bruno Michel; Buie, Cullen

2013-11-01

We have developed a new capillary tube model, consisting of multi-layered capillary tubes oriented in the direction of flow, to predict capillary speeds on spatially graded porous films. Capillary flows through thin porous media have been widely utilized for small size liquid transport systems. However, for most media it is challenging to realize arbitrary shapes and spatially functionalized micro-structures with variable flow properties. Therefore, conventional media can only be used for capillary flows obeying Washburn's equation and the modifications thereof. Given this background, we recently developed a method called breakdown anodization (BDA) to produce highly wetting porous films. The resulting surfaces show nearly zero contact angles and fast water spreading speed. Furthermore, capillary pressure and spreading diffusivity can be expressed as functions of capillary height when customized electric fields are used in BDA. From the capillary tube model, we derived a general capillary flow equation of motion in terms of capillary pressure and spreading diffusivity. The theoretical model shows good agreement with experimental capillary flows. The study will provide novel design methodologies for paper-based microfluidic devices.

Microstructure and Properties of Thermally Sprayed Functionally Graded Coatings for Polymeric Substrates

NASA Technical Reports Server (NTRS)

Ivosevic, M.; Knight, R.; Kalidindi, S. R.; Palmese, G. R.; Sutter, J. K.

2003-01-01

The use of polymer matrix composites (PMCs) in the gas flow path of advanced turbine engines offers significant benefits for aircraft engine performance but their useful lifetime is limited by their poor erosion resistance. High velocity oxy-fuel (HVOF) sprayed polymer/cermet functionally graded (FGM) coatings are being investigated as a method to address this technology gap by providing erosion and oxidation protection to polymer matrix composites. The FGM coating structures are based on a polyimide matrix filled with varying volume fractions of WC-Co. The graded coating architecture was produced using a combination of internal and external feedstock injection, via two computer-controlled powder feeders and controlled substrate preheating. Porosity, coating thickness and volume fraction of the WC-Co filler retained in the coatings were determined using standard metallographic techniques and computer image analysis. The pull-off strength (often referred to as the adhesive strength) of the coatings was evaluated according to the ASTM D 4541 standard test method, which measured the greatest normal tensile force that the coating could withstand. Adhesive/cohesive strengths were determined for three different types of coating structures and compared based on the maximum indicated load and the surface area loaded. The nature and locus of the fractures were characterized according to the percent of adhesive and/or cohesive failure, and the tested interfaces and layers involved were analyzed by Scanning Electron Microscopy.

Heparanase 2 expression inversely correlates with bladder carcinoma grade and stage

PubMed Central

Gross-Cohen, Miriam; Feld, Sari; Naroditsky, Inna; Nativ, Ofer; Ilan, Neta; Vlodavsky, Israel

2016-01-01

While the pro-tumorigenic function of heparanase is well taken, the role of its close homolog, heparanase 2 (Hpa2) in cancer is by far less investigated. Utilizing immunohistochemical analysis we found that Hpa2 is expressed by normal bladder transitional epithelium and its levels are decreased substantially in bladder cancer. Notably, tumors that retain high levels of Hpa2 were diagnosed as low grade (p=0.001) and low stage (p=0.002), suggesting that Hpa2 is required to preserve cell differentiation and halt cell motility. Indeed, migration of 5637 bladder carcinoma cells was attenuated significantly by exogenous addition of purified Hpa2, and over expression of Hpa2 in 5637 cells resulted in smaller tumors that were diagnosed as low grade. We also noted that tumors produced by Hpa2 over expressing cells are abundantly decorated with stromal cells and collagen deposition evident by Masson's/Trichrome staining, correlating with a marked increase in lysyl oxidase (LOX) staining. The association between Hpa2 and LOX was further confirmed clinically, because of the 16 cases that exhibited strong staining of Hpa2, 14 (87.5%) were also stained strongly for LOX (p=0.05). Collectively, our results suggest that Hpa2 functions as a tumor suppressor in bladder cancer, maintaining cellular differentiation and decreasing cell motility in a manner that appears to be independent of regulating heparanase activity. PMID:26968815

Shear bond strength comparison between conventional porcelain fused to metal and new functionally graded dental restorations after thermal-mechanical cycling.

PubMed

Henriques, B; Gonçalves, S; Soares, D; Silva, F S

2012-09-01

The aim of this study was to evaluate the effect of thermo-mechanical cycling on the metal-ceramic bond strength of conventional porcelain fused to metal restorations (PFM) and new functionally graded metal-ceramic dental restorations (FGMR). Two types of specimens were produced: PFM and FGMR specimens. PFM specimens were produced by conventional PFM technique. FGMR specimens were hot pressed and prepared with a metal/ceramic composite interlayer (50 M, vol%) at the metal-ceramic interface. They were manufactured and standardized in cylindrical format and then submitted to thermal (3000, 6000 and 12,000 cycles; between 5 °C and 60 °C; dwell time: 30s) and mechanical (25,000, 50,000 and 100,000 cycles under a load of 50 N; 1.6 Hz) cycling. The shear bond strength tests were performed in a universal testing machine (crosshead speed: 0.5mm/min), using a special device to concentrate the tension at the metal-ceramic interface and the load was applied until fracture. The metal-ceramic interfaces were examined with SEM/EDS prior to and after shear tests. The Young's modulus and hardness were measured across the interfaces of both types of specimens using nanoindentation tests. Data was analyzed with Shapiro-Wilk test to test the assumption of normality. The 2-way ANOVA was used to compare shear bond strength results (p<0.05). FGMR specimens showed significantly (p<0.001) higher shear bond strength results than PFM specimens, irrespective of fatigue conditions. Fatigue conditions significantly (p<0.05) affected the shear bond strength results. The analysis of surface fracture revealed adhesive fracture type for PFM specimens and mixed fracture type for FGMR specimens. Nanoindentation tests showed differences in mechanical properties measured across the metal-ceramic interface for the two types of specimens, namely Young's Modulus and hardness. This study showed significantly better performance of the new functionally graded restorations relative to conventional PFM restorations, under fatigue testing conditions and for the materials tested. Copyright © 2012 Elsevier Ltd. All rights reserved.

The right-hand side of the Jacobi identity: to be naught or not to be ?

NASA Astrophysics Data System (ADS)

Kiselev, Arthemy V.

2016-01-01

The geometric approach to iterated variations of local functionals -e.g., of the (master-)action functional - resulted in an extension of the deformation quantisation technique to the set-up of Poisson models of field theory. It also allowed of a rigorous proof for the main inter-relations between the Batalin-Vilkovisky (BV) Laplacian Δ and variational Schouten bracket [,]. The ad hoc use of these relations had been a known analytic difficulty in the BV- formalism for quantisation of gauge systems; now achieved, the proof does actually not require the assumption of graded-commutativity. Explained in our previous work, geometry's self- regularisation is rendered by Gel'fand's calculus of singular linear integral operators supported on the diagonal. We now illustrate that analytic technique by inspecting the validity mechanism for the graded Jacobi identity which the variational Schouten bracket does satisfy (whence Δ2 = 0, i.e., the BV-Laplacian is a differential acting in the algebra of local functionals). By using one tuple of three variational multi-vectors twice, we contrast the new logic of iterated variations - when the right-hand side of Jacobi's identity vanishes altogether - with the old method: interlacing its steps and stops, it could produce some non-zero representative of the trivial class in the top- degree horizontal cohomology. But we then show at once by an elementary counterexample why, in the frames of the old approach that did not rely on Gel'fand's calculus, the BV-Laplacian failed to be a graded derivation of the variational Schouten bracket.

Digital Writing Practices: A Close Look at One Grade Three Author

ERIC Educational Resources Information Center

Kervin, Lisa; Mantei, Jessica

2016-01-01

This paper reports on the digital writing practices of a Grade Three primary school student as he used an iPad to plan, produce and share digital texts. The case study acknowledges that writing is undergoing a period of great change in many classrooms and works to show how a student author has interpreted and produced digital texts with new…

Tentative Outlines of a Secondary School Mathematics Curriculum, Volume II. SMSG Working Paper.

ERIC Educational Resources Information Center

Stanford Univ., CA. School Mathematics Study Group.

This document is the report of a curriculum writing session, and covers three activities: (1) a textbook for grade seven, written using the outlines produced the previous year (SE 012 735), was reviewed and criticized; (2) the outlines for grades eight and nine, also produced the previous year, were completed in greater detail; and (3)…

A classification system for predicting pallet part quality from hardwood cants

Treesearch

E. Paul Craft; Kenneth R., Jr. Whitenack

1982-01-01

Producers who manufacture pallet parts from hardwood cants generally must purchase cants on the basis of existing structural timber grades that do not adequately reflect the quality of pallet parts produced from resawed cants. A system for classifying cants for pallet part production has been developed that more accurately reflects the parts grade mix that can be...

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part one: introduction, and mind-body exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Imoto, Aline Mizusaki; Toupin-April, Karine; Westby, Marie; Gallardo, Inmaculada C Álvarez; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; Angelis, Gino De; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective mind-body exercise programs and provide clinicians and patients with updated, high-quality recommendations concerning non-traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with mind-body exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+, D-) was used, based on statistical significance ( P < 0.5) and clinical importance (⩾15% improvement). The four high-quality studies identified demonstrated that various mind-body exercise programs are promising for improving the management of knee osteoarthritis. Hatha Yoga demonstrated significant improvement for pain relief (Grade B) and physical function (Grade C+). Tai Chi Qigong demonstrated significant improvement for quality of life (Grade B), pain relief (Grade C+) and physical function (Grade C+). Sun style Tai Chi gave significant improvement for pain relief (Grade B) and physical function (Grade B). Mind-body exercises are promising approaches to reduce pain, as well as to improve physical function and quality of life for individuals with knee osteoarthritis.

Readability Levels of Dental Patient Education Brochures.

PubMed

Boles, Catherine D; Liu, Ying; November-Rider, Debra

2016-02-01

The objective of this study was to evaluate dental patient education brochures produced since 2000 to determine if there is any change in the Flesch-Kincaid grade level readability. A convenience sample of 36 brochures was obtained for analysis of the readability of the patient education material on multiple dental topics. Readability was measured using the Flesch-Kincaid Grade Level through Microsoft Word. Pearson's correlation was used to describe the relationship among the factors of interest. Backward model selection of multiple linear regression model was used to investigate the relationship between Flesch-Kincaid Grade level and a set of predictors included in this study. A convenience sample (n=36) of dental education brochures produced from 2000 to 2014 showed a mean Flesch-Kincaid reading grade level of 9.15. Weak to moderate correlations existed between word count and grade level (r=0.40) and characters count and grade level (r=0.46); strong correlations were found between grade level and average words per sentence (r=0.70), average characters per word (r=0.85) and Flesch Reading Ease (r=-0.98). Only 1 brochure out of the sample met the recommended sixth grade reading level (Flesch-Kincaid Grade Level 5.7). Overall, the Flesch-Kincaid Grade Level of all brochures was significantly higher than the recommended sixth grade reading level (p<0.0001). The findings from this study demonstrated that there has generally been an improvement in the Flesch-Kincaid grade level readability of the brochures. However, the majority of the brochures analyzed are still testing above the recommended sixth grade reading level. Copyright © 2016 The American Dental Hygienists’ Association.

Reliability of Task-Based fMRI for Preoperative Planning: A Test-Retest Study in Brain Tumor Patients and Healthy Controls

PubMed Central

Morrison, Melanie A.; Churchill, Nathan W.; Cusimano, Michael D.; Schweizer, Tom A.; Das, Sunit; Graham, Simon J.

2016-01-01

Background Functional magnetic resonance imaging (fMRI) continues to develop as a clinical tool for patients with brain cancer, offering data that may directly influence surgical decisions. Unfortunately, routine integration of preoperative fMRI has been limited by concerns about reliability. Many pertinent studies have been undertaken involving healthy controls, but work involving brain tumor patients has been limited. To develop fMRI fully as a clinical tool, it will be critical to examine these reliability issues among patients with brain tumors. The present work is the first to extensively characterize differences in activation map quality between brain tumor patients and healthy controls, including the effects of tumor grade and the chosen behavioral testing paradigm on reliability outcomes. Method Test-retest data were collected for a group of low-grade (n = 6) and high-grade glioma (n = 6) patients, and for matched healthy controls (n = 12), who performed motor and language tasks during a single fMRI session. Reliability was characterized by the spatial overlap and displacement of brain activity clusters, BOLD signal stability, and the laterality index. Significance testing was performed to assess differences in reliability between the patients and controls, and low-grade and high-grade patients; as well as between different fMRI testing paradigms. Results There were few significant differences in fMRI reliability measures between patients and controls. Reliability was significantly lower when comparing high-grade tumor patients to controls, or to low-grade tumor patients. The motor task produced more reliable activation patterns than the language tasks, as did the rhyming task in comparison to the phonemic fluency task. Conclusion In low-grade glioma patients, fMRI data are as reliable as healthy control subjects. For high-grade glioma patients, further investigation is required to determine the underlying causes of reduced reliability. To maximize reliability outcomes, testing paradigms should be carefully selected to generate robust activation patterns. PMID:26894279

Fabrication and characterization of compositionally-graded shape memory alloy films

NASA Astrophysics Data System (ADS)

Cole, Daniel Paul

2009-12-01

The miniaturization of engineering devices has created interest in new actuation methods capable of high power and high frequency responses. Shape memory alloy (SMA) thin films have exhibited one of the highest power densities of any material used in these actuation schemes. However, they currently require complex thermomechanical training in order to be actuated, which becomes more difficult as devices approach the microscale. Previous studies have indicated that SMA films with compositional gradients have the added feature of an intrinsic two-way shape memory effect (SME). In this work, a new method for processing and characterizing compositionally-graded transformable thin films is presented. Graded NiTi SMA films were processed using magnetron sputtering. Single and multilayer graded films were deposited onto bulk NiTi substrates and single crystal silicon substrates, respectively. Annealing the films naturally produced a compositional gradient across the film-substrate or film-film interface through diffusion modification. The films were directly characterized using a combination of atomic force microscopy (AFM), x-ray diffraction and Auger electron spectroscopy. The compositional gradient was indirectly characterized by measuring the variation in mechanical properties as a function of depth using nanoindentation. The similarity of the indentation response on graded films of varying thickness was used to estimate the width of the graded interface. The nanoindentation response was predicted using an analysis that accounted for the transformation effects occurring under the tip during loading and the variation of elastic modulus resulting from the compositional gradient. The recovery mechanisms of the graded films are compared with homogeneous films using a new nanoscale technique. An AFM integrated with a heating and cooling stage was used to observe the recovery of inelastic deformation caused through nanoindentation. The graded films exhibited a two-way SME with a reduced hysteresis, while the homogeneous films exhibited the classical one-way SME. The fabrication and characterization techniques developed in this work have the potential to be applied to general graded and multi-layer film systems.

Grading and Academic Freedom: An English Academic's Angle on Hill's Contentious Triangle

ERIC Educational Resources Information Center

Buglear, John

2011-01-01

Following the dismissal of a Canadian professor over disputed grading practices, Hill produced his triangle model of competing interests of academics, administrators and students. In the UK, academic freedom in relation to grading is increasingly constrained reflecting more assertive institutional management supervising over-burdened academic…

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part two: strengthening exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Mizusaki Imoto, Aline; Toupin-April, Karine; Westby, Marie; Álvarez Gallardo, Inmaculada C; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective strengthening exercise programs and provide rehabilitation teams and patients with updated, high-quality recommendations concerning traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with strengthening exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+ or D-) was based on statistical significance ( p < 0.5) and clinical importance (⩾15% improvement). The 26 high-quality studies identified demonstrated that various strengthening exercise programs with/without other types of therapeutic exercises are generally effective for improving knee osteoarthritis management within a six-month period. Strengthening exercise programs demonstrated a significant improvement for pain relief (four Grade A, ten Grade B, two Grade C+), physical function (four Grade A, eight Grade B) and quality of life (three Grade B). Strengthening in combination with other types of exercises (coordination, balance, functional) showed a significant improvement in pain relief (three Grade A, 11 Grade B, eight Grade C+), physical function (two Grade A, four Grade B, three Grade C+) and quality of life (one Grade A, one Grade C+). There are a variety of choices for strengthening exercise programs with positive recommendations for healthcare professionals and knee osteoarthritis patients. There is a need to develop combined behavioral and muscle-strengthening strategies to improve long-term maintenance of regular strengthening exercise programs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dag, Serkan; Yildirim, Bora; Sabuncuoglu, Baris

The objective of this study is to develop crack growth analysis methods for functionally graded materials (FGMs) subjected to mode I cyclic loading. The study presents finite elements based computational procedures for both two and three dimensional problems to examine fatigue crack growth in functionally graded materials. Developed methods allow the computation of crack length and generation of crack front profile for a graded medium subjected to fluctuating stresses. The results presented for an elliptical crack embedded in a functionally graded medium, illustrate the competing effects of ellipse aspect ratio and material property gradation on the fatigue crack growth behavior.

Reverse Engineering of Modified Genes by Bayesian Network Analysis Defines Molecular Determinants Critical to the Development of Glioblastoma

PubMed Central

Kunkle, Brian W.; Yoo, Changwon; Roy, Deodutta

2013-01-01

In this study we have identified key genes that are critical in development of astrocytic tumors. Meta-analysis of microarray studies which compared normal tissue to astrocytoma revealed a set of 646 differentially expressed genes in the majority of astrocytoma. Reverse engineering of these 646 genes using Bayesian network analysis produced a gene network for each grade of astrocytoma (Grade I–IV), and ‘key genes’ within each grade were identified. Genes found to be most influential to development of the highest grade of astrocytoma, Glioblastoma multiforme were: COL4A1, EGFR, BTF3, MPP2, RAB31, CDK4, CD99, ANXA2, TOP2A, and SERBP1. All of these genes were up-regulated, except MPP2 (down regulated). These 10 genes were able to predict tumor status with 96–100% confidence when using logistic regression, cross validation, and the support vector machine analysis. Markov genes interact with NFkβ, ERK, MAPK, VEGF, growth hormone and collagen to produce a network whose top biological functions are cancer, neurological disease, and cellular movement. Three of the 10 genes - EGFR, COL4A1, and CDK4, in particular, seemed to be potential ‘hubs of activity’. Modified expression of these 10 Markov Blanket genes increases lifetime risk of developing glioblastoma compared to the normal population. The glioblastoma risk estimates were dramatically increased with joint effects of 4 or more than 4 Markov Blanket genes. Joint interaction effects of 4, 5, 6, 7, 8, 9 or 10 Markov Blanket genes produced 9, 13, 20.9, 26.7, 52.8, 53.2, 78.1 or 85.9%, respectively, increase in lifetime risk of developing glioblastoma compared to normal population. In summary, it appears that modified expression of several ‘key genes’ may be required for the development of glioblastoma. Further studies are needed to validate these ‘key genes’ as useful tools for early detection and novel therapeutic options for these tumors. PMID:23737970

Functionally graded Ti6Al4V and Inconel 625 by Laser Metal Deposition

NASA Astrophysics Data System (ADS)

Pulugurtha, Syamala R.

The objective of the current work was to fabricate a crack-free functionally graded Ti6Al4V and Inconel 625 thin wall structure by Laser Metal Deposition (LMD). One potential application for the current material system is the ability to fabricate a functionally graded alloy that can be used in a space heat exchanger. The two alloys, Inconel 625 and Ti6Al4V are currently used for aerospace applications. They were chosen as candidates for grading because functionally grading those combines the properties of high strength/weight ratio of Ti6Al4V and high temperature oxidation resistance of Inconel 625 into one multifunctional material for the end application. However, there were challenges associated with the presence of Ni-Ti intermetallic phases (IMPs). The study focused on several critical areas such as (1) understanding microstructural evolution, (2) reducing macroscopic cracking, and (3) reducing mixing between graded layers. Finite element analysis (FEA) was performed to understand the effect of process conditions on multilayer claddings for simplified material systems such as SS316L and Inconel 625 where complex microstructures did not form. The thermo-mechanical models were developed using Abaqus(TM) (and some of them experimentally verified) to predict temperature-gradients; remelt layer depths and residual stresses. Microstructure evolution along the functionally graded Ti6Al4V and Inconel 625 was studied under different processing and grading conditions. Thermodynamic modeling using Factsage (v 6.1) was used to construct phase diagrams and predict the possible equilibrium major/minor phases (verified experimentally by XRD) that may be present along the functionally graded Ti6Al4V and Inconel 625 thin wall structures.

Higher-Order Theory for Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Aboudi, Jacob; Pindera, Marek-Jerzy; Arnold, Steven M.

1999-01-01

This paper presents the full generalization of the Cartesian coordinate-based higher-order theory for functionally graded materials developed by the authors during the past several years. This theory circumvents the problematic use of the standard micromechanical approach, based on the concept of a representative volume element, commonly employed in the analysis of functionally graded composites by explicitly coupling the local (microstructural) and global (macrostructural) responses. The theoretical framework is based on volumetric averaging of the various field quantities, together with imposition of boundary and interfacial conditions in an average sense between the subvolumes used to characterize the composite's functionally graded microstructure. The generalization outlined herein involves extension of the theoretical framework to enable the analysis of materials characterized by spatially variable microstructures in three directions. Specialization of the generalized theoretical framework to previously published versions of the higher-order theory for materials functionally graded in one and two directions is demonstrated. In the applications part of the paper we summarize the major findings obtained with the one-directional and two-directional versions of the higher-order theory. The results illustrate both the fundamental issues related to the influence of microstructure on microscopic and macroscopic quantities governing the response of composites and the technologically important applications. A major issue addressed herein is the applicability of the classical homogenization schemes in the analysis of functionally graded materials. The technologically important applications illustrate the utility of functionally graded microstructures in tailoring the response of structural components in a variety of applications involving uniform and gradient thermomechanical loading.

Aeroelastic Tailoring of a Plate Wing with Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Dunning, Peter D.; Stanford, Bret K.; Kim, H. Alicia; Jutte, Christine V.

2014-01-01

This work explores the use of functionally graded materials for the aeroelastic tailoring of a metallic cantilevered plate-like wing. Pareto trade-off curves between dynamic stability (flutter) and static aeroelastic stresses are obtained for a variety of grading strategies. A key comparison is between the effectiveness of material grading, geometric grading (i.e., plate thickness variations), and using both simultaneously. The introduction of material grading does, in some cases, improve the aeroelastic performance. This improvement, and the physical mechanism upon which it is based, depends on numerous factors: the two sets of metallic material parameters used for grading, the sweep of the plate, the aspect ratio of the plate, and whether the material is graded continuously or discretely.

Domain General Mediators of the Relation between Kindergarten Number Sense and First-Grade Mathematics Achievement

PubMed Central

Hassinger-Das, Brenna; Jordan, Nancy C.; Glutting, Joseph; Irwin, Casey; Dyson, Nancy

2013-01-01

Domain general skills that mediate the relation between kindergarten number sense and first-grade mathematics skills were investigated. Participants were 107 children who displayed low number sense in the fall of kindergarten. Controlling for background variables, multiple regression analyses showed that attention problems and executive functioning both were unique predictors of mathematics outcomes. Attention problems were more important for predicting first-grade calculation performance while executive functioning was more important for predicting first-grade performance on applied problems. Moreover, both executive functioning and attention problems were unique partial mediators of the relationship between kindergarten and first-grade mathematics skills. The results provide empirical support for developing interventions that target executive functioning and attention problems in addition to instruction in number skills for kindergartners with initial low number sense. PMID:24237789

Domain-general mediators of the relation between kindergarten number sense and first-grade mathematics achievement.

PubMed

Hassinger-Das, Brenna; Jordan, Nancy C; Glutting, Joseph; Irwin, Casey; Dyson, Nancy

2014-02-01

Domain-general skills that mediate the relation between kindergarten number sense and first-grade mathematics skills were investigated. Participants were 107 children who displayed low number sense in the fall of kindergarten. Controlling for background variables, multiple regression analyses showed that both attention problems and executive functioning were unique predictors of mathematics outcomes. Attention problems were more important for predicting first-grade calculation performance, whereas executive functioning was more important for predicting first-grade performance on applied problems. Moreover, both executive functioning and attention problems were unique partial mediators of the relationship between kindergarten and first-grade mathematics skills. The results provide empirical support for developing interventions that target executive functioning and attention problems in addition to instruction in number skills for kindergartners with initial low number sense. Copyright © 2013 Elsevier Inc. All rights reserved.

Delta One T Cells for Immunotherapy of Chronic Lymphocytic Leukemia: Clinical-Grade Expansion/Differentiation and Preclinical Proof of Concept.

PubMed

Almeida, Afonso R; Correia, Daniel V; Fernandes-Platzgummer, Ana; da Silva, Cláudia L; da Silva, Maria Gomes; Anjos, Diogo Remechido; Silva-Santos, Bruno

2016-12-01

The Vδ1 + subset of γδ T lymphocytes is a promising candidate for cancer immunotherapy, but the lack of suitable expansion/differentiation methods has precluded therapeutic application. We set out to develop and test (preclinically) a Vδ1 + T-cell-based protocol that is good manufacturing practice compatible and devoid of feeder cells for prompt clinical translation. We tested multiple combinations of clinical-grade agonist antibodies and cytokines for their capacity to expand and differentiate (more than 2-3 weeks) Vδ1 + T cells from the peripheral blood of healthy donors and patients with chronic lymphocytic leukemia (CLL). We characterized the phenotype and functional potential of the final cellular product, termed Delta One T (DOT) cells, in vitro and in vivo (xenograft models of CLL). We describe a very robust two-step protocol for the selective expansion (up to 2,000-fold in large clinical-grade cell culture bags) and differentiation of cytotoxic Vδ1 + (DOT) cells. These expressed the natural cytotoxicity receptors, NKp30 and NKp44, which synergized with the T-cell receptor to mediate leukemia cell targeting in vitro When transferred in vivo, DOT cells infiltrated tumors and peripheral organs, and persisted until the end of the analysis without showing signs of loss of function; indeed, DOT cells proliferated and produced abundant IFNγ and TNFα, but importantly no IL17, in vivo Critically, DOT cells were capable of inhibiting tumor growth and preventing dissemination in xenograft models of CLL. We provide a clinical-grade method and the preclinical proof of principle for application of a new cellular product, DOT cells, in adoptive immunotherapy of CLL. Clin Cancer Res; 22(23); 5795-804. ©2016 AACR. ©2016 American Association for Cancer Research.

Reconsidering price projections for selected grades of Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber.

Treesearch

Richard W. Haynes; Roger D. Fight

2004-01-01

Grade-specific price projections were once again developed for Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber. These grade-specific price projections can be used to demonstrate the returns to land management of practices that lead to high-quality logs that produce a larger proportion of high grades of lumber. The price ratios among low, medium,...

The End of the Reading Age: Grade and Age Effects in Early Schooling

ERIC Educational Resources Information Center

Alexander, James R.M.; Martin, Frances

2004-01-01

During the school years, psychological test norms may be indexed by age or by grade. A number of studies have shown that using age-based norms appears to produce biases associated with grade assignment. Cahan and Cohen [Child Dev. 60 (1989) 1239-1249] showed that the effect of one grade was over twice the effect of 1 year of age for most verbal…

Ottawa Panel evidence-based clinical practice guidelines for therapeutic exercise in the management of hip osteoarthritis.

PubMed

Brosseau, Lucie; Wells, George A; Pugh, Arlanna G; Smith, Christine Am; Rahman, Prinon; Àlvarez Gallardo, Inmaculada C; Toupin-April, Karine; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Taki, Jade; Marcotte, Rachel; Fransen, Marlene; Hernandez-Molina, Gabriela; Kenny, Glen P; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; Brooks, Sydney; Laferriere, Lucie; McLean, Linda; Longchamp, Guy

2016-10-01

The primary objective is to identify effective land-based therapeutic exercise interventions and provide evidence-based recommendations for managing hip osteoarthritis. A secondary objective is to develop an Ottawa Panel evidence-based clinical practice guideline for hip osteoarthritis. The search strategy and modified selection criteria from a Cochrane review were used. Studies included hip osteoarthritis patients in comparative controlled trials with therapeutic exercise interventions. An Expert Panel arrived at a Delphi survey consensus to endorse the recommendations. The Ottawa Panel hierarchical alphabetical grading system (A, B, C+, C, D, D+, or D-) considered the study design (level I: randomized controlled trial and level II: controlled clinical trial), statistical significance (p < 0.5), and clinical importance (⩾15% improvement). Four high-quality studies were included, which demonstrated that variations of strength training, stretching, and flexibility exercises are generally effective for improving the management of hip osteoarthritis. Strength training exercises displayed the greatest improvements for pain (Grade A), disability (Grades A and C+), physical function (Grade A), stiffness (Grade A), and range of motion (Grade A) within a short time period (8-24 weeks). Stretching also greatly improved physical function (Grade A), and flexibility exercises improved pain (Grade A), range of motion (Grade A), physical function (Grade A), and stiffness (Grade C+). The Ottawa Panel recommends land-based therapeutic exercise, notably strength training, for management of hip osteoarthritis in reducing pain, stiffness and self-reported disability, and improving physical function and range of motion. © The Author(s) 2015.

Specific features of after-school program quality: associations with children's functioning in middle childhood.

PubMed

Pierce, Kim M; Bolt, Daniel M; Vandell, Deborah Lowe

2010-06-01

This longitudinal study examined associations between three after-school program quality features (positive staff-child relations, available activities, programming flexibility) and child developmental outcomes (reading and math grades, work habits, and social skills with peers) in Grade 2 and then Grade 3. Participants (n = 120 in Grade 2, n = 91 in Grade 3) attended after-school programs more than 4 days per week, on average. Controlling for child and family background factors and children's prior functioning on the developmental outcomes, positive staff-child relations in the programs were positively associated with children's reading grades in both Grades 2 and 3, and math grades in Grade 2. Positive staff-child relations also were positively associated with social skills in Grade 2, for boys only. The availability of a diverse array of age-appropriate activities at the programs was positively associated with children's math grades and classroom work habits in Grade 3. Programming flexibility (child choice of activities) was not associated with child outcomes.

Multi-Resolution Unstructured Grid-Generation for Geophysical Applications on the Sphere

NASA Technical Reports Server (NTRS)

Engwirda, Darren

2015-01-01

An algorithm for the generation of non-uniform unstructured grids on ellipsoidal geometries is described. This technique is designed to generate high quality triangular and polygonal meshes appropriate for general circulation modelling on the sphere, including applications to atmospheric and ocean simulation, and numerical weather predication. Using a recently developed Frontal-Delaunay-refinement technique, a method for the construction of high-quality unstructured ellipsoidal Delaunay triangulations is introduced. A dual polygonal grid, derived from the associated Voronoi diagram, is also optionally generated as a by-product. Compared to existing techniques, it is shown that the Frontal-Delaunay approach typically produces grids with near-optimal element quality and smooth grading characteristics, while imposing relatively low computational expense. Initial results are presented for a selection of uniform and non-uniform ellipsoidal grids appropriate for large-scale geophysical applications. The use of user-defined mesh-sizing functions to generate smoothly graded, non-uniform grids is discussed.

Dialogue and Exchange of Information about Grade Inflation Can Counteract Its Effects

ERIC Educational Resources Information Center

Barriga, Alvaro Q.; Cooper, Eric K.; Gawelek, Mary Ann; Butela, Kristin; Johnson, Elizabeth

2008-01-01

This investigation documents an intervention that successfully counteracted a grade inflation trend at a small, Catholic, liberal arts university in the eastern United States. The intervention produced a significant drop in grades awarded by full-time faculty, but not by adjunct faculty who were not yet included in the intervention. Institutional…

Price projections for selected grades of Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber.

Treesearch

Richard W. Haynes; Roger D. Fight

1992-01-01

Grade-specific price projections were developed for Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber. These grade-specific price projections can be used in evaluating management practices that will affect the quality of saw logs produced under various management regimes.

Pallet part grading trainer

Treesearch

Deborah F. Cook; Philip A. Araman; Matthew F. Winn

2000-01-01

A computerized pallet grading training system was developed to facilitate the production of higher quality pallets. Higher quality pallets would be more durable and could be re-used many times, resulting in long-term savings. Schmoldt et al. (1993) evaluated the economic impact of grading and sorting pallet parts. They determined that higher quality pallets produced by...

40 CFR 79.10 - Application for registration by fuel manufacturer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in § 79.11. If the manufacturer produces more than one grade or brand of a designated fuel, a manufacturer may include more than one grade or brand in a single application, provided that the application includes all information required for registration of each such grade or brand by this part. Each...

Student Test Grades in College: A Study of Possible Predictors

ERIC Educational Resources Information Center

Hammonds, Frank; Mariano, Gina

2015-01-01

Research on variables related to test performance has produced mixed results. Typically, research of this type involves only a few variables. In an attempt to obtain a more complete picture, we investigated how test grades might be related to variables such as classification, student seating location, test completion time, predicted grade, time…

Gearing up for Fast Grading and Reporting

ERIC Educational Resources Information Center

O'Connor, Ken; Jung, Lee Ann; Reeves, Douglas

2018-01-01

The authors posit that the traditional grading system involving points and percentages is not the best way to prepare students to be the self-directed, independent learners they need to be. A better system would produce grades that are FAST (fair, accurate, specific, timely). To bring about these changes, school leaders need not create full…

Silicon material technology status. [assessment for electronic and photovoltaic applications

NASA Technical Reports Server (NTRS)

Lutwack, R.

1983-01-01

Silicon has been the basic element for the electronic and photovoltaic industries. The use of silicon as the primary element for terrestrial photovoltaic solar arrays is projected to continue. The reasons for this projection are related to the maturity of silicon technology, the ready availability of extremely pure silicon, the performance of silicon solar cells, and the considerable present investment in technology and manufacturing facilities. The technologies for producing semiconductor grade silicon and, to a lesser extent, refined metallurgical grade silicon are considered. It is pointed out that nearly all of the semiconductor grade silicon is produced by processes based on the Siemens deposition reactor, a technology developed 26 years ago. The state-of-the-art for producing silicon by this process is discussed. It is expected that efforts to reduce polysilicon process costs will continue.

A case of alpha-fetoprotein-producing esophageal adenocarcinoma.

PubMed

Chen, Yi-Yu; Hsu, Wen-Hung; Hu, Huang-Ming; Wu, Deng-Chyang; Lin, Wen-Yi

2013-02-01

Alpha-fetoprotein is a well-known tumor marker in the screening and follow-up of hepatocellular carcinoma. In Taiwanese society, a high prevalence of hepatitis and hepatoma and elevation of alpha-fetoprotein associated with liver function impairment usually suggested clinics undertake further examination for liver or genital tumor. We report the case of 45-year-old man who was found to have an alpha-fetoprotein-producing esophageal adenocarcinoma with an initial presentation of liver function impairment and rapid elevation of alpha-fetoprotein. Esophageal cancer was diagnosed via endoscope and a biopsy proved the presence of adenocarcinoma. A small endoscopic biopsy specimen failed to identify the alpha-fetoprotein positive tumor cell. Esophagectomy was performed and histopathological study of surgical specimen revealed grade II adenocarcinoma with regional metastatic lymphadenopathy. Immunohistochemical study was focal positive for alpha-fetoprotein. Serum alpha-fetoprotein declined transiently after esophagectomy and fluctuation of alpha-fetoprotein level was noted during the treatment with adjuvant chemotherapy. Finally, 19 months after the operation, the patient died due to multiple organ metastases with multiple organ failure. Thus, a small specimen for upper endoscopy may not be sufficient in the presence of alpha-fetoprotein-producing adenocarcinoma. Monitoring of serum alpha-fetoprotein may be useful in the evaluation and follow-up of esophageal alpha-fetoprotein-producing adenocarcinoma. Copyright © 2012. Published by Elsevier B.V.

Research into material behaviour of the polymeric samples obtained after 3D-printing and subjected to compression test

NASA Astrophysics Data System (ADS)

Petrov, Mikhail A.; Kosatchyov, Nikolay V.; Petrov, Pavel A.

2016-10-01

The paper represents the results of the study concerning the investigation of the influence of the filling grade (material density) on the force characteristic during the uniaxial compression test of the cylindrical polymer probes produced by additive technology based on FDM. The authors have shown that increasing of the filling grate follows to the increase of the deformation forces. However, the dependency is not a linear function and characterized by soft-elastic model of material behaviour, which is typical for polymers partly crystallized structure.

Hot metal gas forming of titanium grade 2 bent tubes

NASA Astrophysics Data System (ADS)

Paul, Alexander; Werner, Markus; Trân, Ricardo; Landgrebe, Dirk

2017-10-01

Within the framework of investigations, an exhaust gas component made of Titanium Grade 2 was produced by means of Hot Metal Gas Forming (HMGF) at the Fraunhofer IWU in Chemnitz, Germany. The semi-finished products were two-fold bent, thermal joined, calibrated and pre-formed tubes. So far, a three-stage internal high-pressure forming process at room temperature plus two necessary intermediate heat treatments were used to produce the component. Due to its complexity as well as the limited forming ability of Titanium Grade 2 at room temperature an one step Hot Metal Gas Forming was developed to replace the former procedure.

Socioeconomic inequalities in physical and mental functioning of British, Finnish, and Japanese civil servants: role of job demand, control, and work hours.

PubMed

Sekine, Michikazu; Chandola, Tarani; Martikainen, Pekka; Marmot, Michael; Kagamimori, Sadanobu

2009-11-01

This study aims to evaluate whether the pattern of socioeconomic inequalities in physical and mental functioning as measured by the Short Form 36 (SF-36) differs among employees in Britain, Finland, and Japan and whether work characteristics contribute to some of the health inequalities. The participants were 7340 (5122 men and 2218 women) British employees, 2297 (1638 men and 659 women) Japanese employees, and 8164 (1649 men and 6515 women) Finnish employees. All the participants were civil servants aged 40-60 years. Both male and female low grade employees had poor physical functioning in all cohorts. British and Japanese male low grade employees tended to have poor mental functioning but the associations were significant only for Japanese men. No consistent employment-grade differences in mental functioning were observed among British and Japanese women. Among Finnish men and women, high grade employees had poor mental functioning. In all cohorts, high grade employees had high control, high demands and long work hours. The grade differences in poor physical functioning and disadvantaged work characteristics among non-manual workers were somewhat smaller in the Finnish cohort than in the British and Japanese cohorts. Low control, high demands, and both short and long work hours were associated with poor functioning. When work characteristics were adjusted for, the socioeconomic differences in poor functioning were mildly attenuated in men, but the differences increased slightly in women. This study reconfirms the generally observed pattern of socioeconomic inequalities in health for physical functioning but not for mental functioning. The role of work characteristics in the relationship between socioeconomic status and health differed between men and women but was modest overall. We suggest that these differences in the pattern and magnitude of grade differences in work characteristics and health among the 3 cohorts may be attributable to the different welfare regimes among the 3 countries.

Socioeconomic Inequalities in Physical and Mental Functioning of British, Finnish, and Japanese Civil Servants: Role of Job Demand, Control, and Work Hours

PubMed Central

Chandola, Tarani; Martikainen, Pekka; Marmot, Michael; Kagamimori, Sadanobu

2009-01-01

This study aims to evaluate whether the pattern of socioeconomic inequalities in physical and mental functioning as measured by the Short Form 36 (SF-36) differs among employees in Britain, Finland, and Japan and whether work characteristics contribute to some of the health inequalities. The participants were 7340 (5122 men and 2218 women) British employees, 2297 (1638 men and 659 women) Japanese employees, and 8164 (1649 men and 6515 women) Finnish employees. All the participants were civil servants aged 40–60 years. Both male and female low grade employees had poor physical functioning in all cohorts. British and Japanese male low grade employees tended to have poor mental functioning but the associations were significant only for Japanese men. No consistent employment-grade differences in mental functioning were observed among British and Japanese women. Among Finnish men and women, high grade employees had poor mental functioning. In all cohorts, high grade employees had high control, high demands and long work hours. The grade differences in poor physical functioning and disadvantaged work characteristics among non-manual workers were somewhat smaller in the Finnish cohort than in the British and Japanese cohorts. Low control, high demands, and both short and long work hours were associated with poor functioning. When work characteristics were adjusted for, the socioeconomic differences in poor functioning were mildly attenuated in men, but the differences increased slightly in women. This study reconfirms the generally observed pattern of socioeconomic inequalities in health for physical functioning but not for mental functioning. The role of work characteristics in the relationship between socioeconomic status and health differed between men and women but was modest overall. We suggest that these differences in the pattern and magnitude of grade differences in work characteristics and health among the 3 cohorts may be attributable to the different welfare regimes among the 3 countries. PMID:19767137

Computational Study of a Functionally Graded Ceramic-Metallic Armor

DTIC Science & Technology

2006-12-15

UNCLAS –Dist. A - Approved for public release Computational Study of a Functionally Graded Ceramic-Metallic Armor Douglas W. Templeton1, Tara J...efficiency of a postulated FGM ceramic-metallic armor system composed of aluminum nitride (AlN) and aluminum. The study had two primary...2006 2. REPORT TYPE N/ A 3. DATES COVERED - 4. TITLE AND SUBTITLE Computational Study of a Functionally Graded Ceramic-Metallic Armor 5a

Psychological Symptoms Linking Exposure to Community Violence and Academic Functioning in African American Adolescents

PubMed Central

Busby, Danielle R.; Lambert, Sharon F.; Ialongo, Nicholas S.

2013-01-01

African American adolescents are exposed disproportionately to community violence, increasing their risk for emotional and behavioral symptoms that can detract from learning and undermine academic outcomes. The present study examined whether aggressive behavior and depressive and anxious symptoms mediated the association between exposure to community violence and academic functioning, and if the indirect effects of community violence on academic functioning differed for boys and girls, in a community sample of urban African American adolescents (N = 491; 46.6% female). Structural equation modeling was used to examine the indirect effect of exposure to community violence in grade 6 on grade 8 academic functioning. Results revealed that aggression in grade 7 mediated the association between grade 6 exposure to community violence and grade 8 academic functioning. There were no indirect effects through depressive and anxious symptoms, and gender did not moderate the indirect effect. Findings highlight the importance of targeting aggressive behavior for youth exposed to community violence to not only improve their behavioral adjustment but also their academic functioning. Implications for future research are discussed. PMID:23277294

Social Competence and Social Support as Mediators between Comorbid Depressive and Conduct Problems and Functional Outcomes in Middle School Students

PubMed Central

Rockhill, Carol M.; Stoep, Ann Vander; McCauley, Elizabeth; Katon, Wayne J.

2009-01-01

This study examined the roles of social competence and social support as potential mediators of the association between psychopathology and functional outcomes in a middle school sample (n=521). Participants were stratified into four psychopathology risk groups (depression only, conduct problems only, comorbid depression and conduct problems, low symptoms) based on screening during early 6th grade. Functional outcomes were 6th grade point average (GPA) and parent rating of global adaptive functioning in their 7th grade student. Low levels of social competence were found to mediate the association between psychiatric symptoms and both lower grades and global functioning, for adolescents with depressive symptoms alone and with comorbid symptoms, but not for those with conduct problems alone. Lack of social support mediated the association between symptoms and lower grades for adolescents with depression alone and comorbid symptoms, but not those with conduct problems alone. These findings suggest that intervention to improve social competence and social support may enhance functional outcomes, especially for youth with depressive symptoms or comorbid depressive and conduct symptoms. PMID:18694594

Production of Solar-Grade Silicon by the SiF4 and Mg Reaction

NASA Astrophysics Data System (ADS)

Xie, Xiaobing; Bao, Jianer; Sanjurjo, Angel

2016-12-01

Over 90 pct of the solar cells currently produced and installed are Si based, and this industrial dominance is expected to persist for the foreseeable future. The crystalline Si substrate accounts for a significant portion of the total cost of solar cells. In order to further reduce the cost of solar panels, there has been significant effort in producing inexpensive solar-grade Si, mainly through three paths: (1) modification of the Siemens process to lower production costs, (2) upgrading metallurgical-grade Si to reach solar-grade purity, and (3) by means of new metallurgical processes such as the reduction of a silicon halide, e.g., SiF4 or SiCl4, by a reactive metal such as Na or Zn. In this paper, we describe an alternative path that uses Mg to react with SiF4 to produce low-cost solar grade Si. Experimental conditions for complete reaction and separation of the products, Si and MgF2, as well as aspects of the reaction mechanism are described. The reaction involves both a heterogeneous liquid-gas phase reaction and a homogeneous gas-gas phase reaction. When pure Mg was used, the Si product obtained had sub-ppm levels of B and P impurities and is expected to be suitable for solar cell applications.

Bioinspired design of dental multilayers.

PubMed

Huang, M; Wang, R; Thompson, V; Rekow, D; Soboyejo, W O

2007-01-01

This paper considers the use of bioinspired functionally graded structures in the design of dental multi-layers that are more resistant to sub-surface crack nucleation. Unlike existing dental crown restorations that give rise to high stress concentration, the functionally graded layers (between crown materials and the joins that attach them to dentin) are shown to promote significant reductions in stress and improvements in the critical crack size. Special inspiration is drawn from the low stress concentrations associated with the graded distributions in the dentin-enamel-junction (DEJ). The implications of such functionally graded structures are also discussed for the design of dental restorations.

Thalamic diffusion differences related to cognitive function in white matter lesions.

PubMed

Fernández-Andújar, Marina; Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Cáceres, Cynthia; Bargalló, Núria; Barrios, Maite; Arenillas, Juan Francisco; Toran, Pere; Alzamora, Maite; Clemente, Imma; Dávalos, Antoni; Mataró, Maria

2014-05-01

Cerebral white matter lesions (WMLs) are related to cognitive deficits, probably due to a disruption of frontal-subcortical circuits. We explored thalamic diffusion differences related to white matter lesions (WMLs) and their association with cognitive function in middle-aged individuals. Ninety-six participants from the Barcelona-AsIA Neuropsychology Study were included. Participants were classified into groups based on low grade and high grade of periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs). Tract-Based Spatial Statistics was used to study thalamic diffusion differences between groups. Mean fractional anisotropy (FA) values in significant areas were calculated for each subject and correlated with cognitive performance. Participants with high-grade PVHs and DWMHs showed lower FA thalamic values compared to those with low-grade PVHs and DWMHs, respectively. Decreased FA thalamic values in high-grade DWMHs, but not high-grade PVH, were related to lower levels of performance in psychomotor speed, verbal fluency, and visuospatial skills. Thalamic diffusion differences are related to lower cognitive function only in participants with high-grade DWMHs. These results support the hypothesis that fronto-subcortical disruption is associated with cognitive function only in DWMHs. Copyright © 2014 Elsevier Inc. All rights reserved.

High-grade ovarian cancer secreting effective exosomes in tumor angiogenesis.

PubMed

Yi, Huan; Ye, Jun; Yang, Xiao-Mei; Zhang, Li-Wen; Zhang, Zhi-Gang; Chen, Ya-Ping

2015-01-01

Ovarian cancer, the most lethal gynecological cancer, related closely to tumor stage. High-grade ovarian cancer always results in a late diagnose and high recurrence, which reduce survival within five years. Until recently, curable therapy is still under research and anti-angiogenesis proves a promising way. Tumor-derived exosomes are essential in tumor migration and metastases such as angiogenesis is enhanced by exosomes. In our study, we have made comparison between high-grade and unlikely high-grade serous ovarian cancer cells on exosomal function of endothelial cells proliferation, migration and tube formation. Exosomes derived from high-grade ovarian cancer have a profound impact on angiogenesis with comparison to unlikely high-grade ovarian cancer. Proteomic profiles revealed some potential proteins involved in exosomal function of angiogenesis such as ATF2, MTA1, ROCK1/2 and so on. Therefore, exosomes plays an influential role in angiogenesis in ovarian serous cancer and also function more effectively in high-grade ovarian cancer cells.

Comparison of the Diagnostic Accuracy of DSC- and Dynamic Contrast-Enhanced MRI in the Preoperative Grading of Astrocytomas.

PubMed

Nguyen, T B; Cron, G O; Perdrizet, K; Bezzina, K; Torres, C H; Chakraborty, S; Woulfe, J; Jansen, G H; Sinclair, J; Thornhill, R E; Foottit, C; Zanette, B; Cameron, I G

2015-11-01

Dynamic contrast-enhanced MR imaging parameters can be biased by poor measurement of the vascular input function. We have compared the diagnostic accuracy of dynamic contrast-enhanced MR imaging by using a phase-derived vascular input function and "bookend" T1 measurements with DSC MR imaging for preoperative grading of astrocytomas. This prospective study included 48 patients with a new pathologic diagnosis of an astrocytoma. Preoperative MR imaging was performed at 3T, which included 2 injections of 5-mL gadobutrol for dynamic contrast-enhanced and DSC MR imaging. During dynamic contrast-enhanced MR imaging, both magnitude and phase images were acquired to estimate plasma volume obtained from phase-derived vascular input function (Vp_Φ) and volume transfer constant obtained from phase-derived vascular input function (K(trans)_Φ) as well as plasma volume obtained from magnitude-derived vascular input function (Vp_SI) and volume transfer constant obtained from magnitude-derived vascular input function (K(trans)_SI). From DSC MR imaging, corrected relative CBV was computed. Four ROIs were placed over the solid part of the tumor, and the highest value among the ROIs was recorded. A Mann-Whitney U test was used to test for difference between grades. Diagnostic accuracy was assessed by using receiver operating characteristic analysis. Vp_ Φ and K(trans)_Φ values were lower for grade II compared with grade III astrocytomas (P < .05). Vp_SI and K(trans)_SI were not significantly different between grade II and grade III astrocytomas (P = .08-0.15). Relative CBV and dynamic contrast-enhanced MR imaging parameters except for K(trans)_SI were lower for grade III compared with grade IV (P ≤ .05). In differentiating low- and high-grade astrocytomas, we found no statistically significant difference in diagnostic accuracy between relative CBV and dynamic contrast-enhanced MR imaging parameters. In the preoperative grading of astrocytomas, the diagnostic accuracy of dynamic contrast-enhanced MR imaging parameters is similar to that of relative CBV. © 2015 by American Journal of Neuroradiology.

Design Document for 12th Grade NAEP Preparedness Research Judgmental Standard Setting Studies: Setting Standards on the National Assessment of Educational Progress in Reading and Mathematics for 12th Grade Preparedness

ERIC Educational Resources Information Center

National Assessment Governing Board, 2010

2010-01-01

The National Assessment Governing Board adopted a Program of Preparedness Research in March 2009. Several categories of research studies were recommended to produce results for reporting 12th grade preparedness for the 2009 grade 12 National Assessment of Educational Progress (NAEP) in reading and mathematics. The categories included content…

Mechanical analysis of non-uniform bi-directional functionally graded intelligent micro-beams using modified couple stress theory

NASA Astrophysics Data System (ADS)

Bakhshi Khaniki, Hossein; Rajasekaran, Sundaramoorthy

2018-05-01

This study develops a comprehensive investigation on mechanical behavior of non-uniform bi-directional functionally graded beam sensors in the framework of modified couple stress theory. Material variation is modelled through both length and thickness directions using power-law, sigmoid and exponential functions. Moreover, beam is assumed with linear, exponential and parabolic cross-section variation through the length using power-law and sigmoid varying functions. Using these assumptions, a general model for microbeams is presented and formulated by employing Hamilton’s principle. Governing equations are solved using a mixed finite element method with Lagrangian interpolation technique, Gaussian quadrature method and Wilson’s Lagrangian multiplier method. It is shown that by using bi-directional functionally graded materials in nonuniform microbeams, mechanical behavior of such structures could be affected noticeably and scale parameter has a significant effect in changing the rigidity of nonuniform bi-directional functionally graded beams.

GRADE Evidence to Decision (EtD) frameworks for adoption, adaptation, and de novo development of trustworthy recommendations: GRADE-ADOLOPMENT.

PubMed

Schünemann, Holger J; Wiercioch, Wojtek; Brozek, Jan; Etxeandia-Ikobaltzeta, Itziar; Mustafa, Reem A; Manja, Veena; Brignardello-Petersen, Romina; Neumann, Ignacio; Falavigna, Maicon; Alhazzani, Waleed; Santesso, Nancy; Zhang, Yuan; Meerpohl, Jörg J; Morgan, Rebecca L; Rochwerg, Bram; Darzi, Andrea; Rojas, Maria Ximenas; Carrasco-Labra, Alonso; Adi, Yaser; AlRayees, Zulfa; Riva, John; Bollig, Claudia; Moore, Ainsley; Yepes-Nuñez, Juan José; Cuello, Carlos; Waziry, Reem; Akl, Elie A

2017-01-01

Guideline developers can: (1) adopt existing recommendations from others; (2) adapt existing recommendations to their own context; or (3) create recommendations de novo. Monetary and nonmonetary resources, credibility, maximization of uptake, as well as logical arguments should guide the choice of the approach and processes. To describe a potentially efficient model for guideline production based on adoption, adaptation, and/or de novo development of recommendations utilizing the Grading of Recommendations Assessment, Development and Evaluation (GRADE) Evidence to Decision (EtD) frameworks. We applied the model in a new national guideline program producing 22 practice guidelines. We searched for relevant evidence that informs the direction and strength of a recommendation. We then produced GRADE EtDs for guideline panels to develop recommendations. We produced a total of 80 EtD frameworks in approximately 4 months and 146 EtDs in approximately 6 months in two waves. Use of the EtD frameworks allowed panel members understand judgments of others about the criteria that bear on guideline recommendations and then make their own judgments about those criteria in a systematic approach. The "GRADE-ADOLOPMENT" approach to guideline production combines adoption, adaptation, and, as needed, de novo development of recommendations. If developers of guidelines follow EtD criteria more widely and make their work publically available, this approach should prove even more useful. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.

PubMed

Lin, Wei-Shao; Starr, Thomas L; Harris, Bryan T; Zandinejad, Amirali; Morton, Dean

2013-01-01

This article describes the preliminary findings of the mechanical properties of functionally graded titanium with controlled distribution of porosity and a reduced Young's modulus on the basis of a computeraided design (CAD) file, using the rapid-prototyping, direct metal laser sintering (DMLS) technique. Sixty specimens of Ti-6Al-4V were created using a DMLS machine (M270) following the standard for tensile testing of metals. One group was fabricated with only 170 W of laser energy to create fully dense specimens (control group). The remaining specimens all featured an outer fully dense "skin" layer and a partially sintered porous inner "core" region. The outer "skin" of each specimen was scanned at 170 W and set at a thickness of 0.35, 1.00, or 1.50 mm for different specimen groups. The inner "core" of each specimen was scanned at a lower laser power (43 or 85 W). The partially sintered core was clearly visible in all specimens, with somewhat greater porosity with the lower laser power. However, the amount of porosity in the core region was not related to the laser power alone; thinner skin layers resulted in higher porosity for the same power values in the core structure. The lowest Young's modulus achieved, 35 GPa, is close to that of bone and was achieved with a laser power of 43 W and a skin thickness of 0.35 mm, producing a core that comprised 74% of the total volume. Additive manufacturing technology may provide an efficient alternative way to fabricate customized dental implants based on a CAD file with a functionally graded structure that may minimize stress shielding and improve the long-term performance of dental implants.

7 CFR 56.10 - Who may be licensed and authorized.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs Licensed and Authorized Graders § 56.10 Who... the officer in charge of the shell egg grading service of the AMS or any other designated officer. (c... for Quality of Individual Shell Eggs,” with respect to eggs purchased from producers or eggs to be...

7 CFR 56.10 - Who may be licensed and authorized.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs Licensed and Authorized Graders § 56.10 Who... the officer in charge of the shell egg grading service of the AMS or any other designated officer. (c... for Quality of Individual Shell Eggs,” with respect to eggs purchased from producers or eggs to be...

What is low-value and/or low-grade hardwood?

Treesearch

William Luppold; Matthew Bumgardner

2003-01-01

The utilization of low-value and low-grade hardwood material is a recurrent concern in forest products research. This paper clarifies and expands on this topic and provides a framework to help researchers isolate specific researchable problems in this area and to discuss potential products that might be produced from this resource. Although low-value and low-grade...

Project Math-Co. Career Based Math Text Book Produced Entirely by Eighth Grade Students at Wiscasset Middle School.

ERIC Educational Resources Information Center

Wiscasset Middle School, ME.

This career-based mathematics text book was written for eighth grade students by eighth grade students at Wiscasset Middle School, Wiscasset, Maine. The text has an innovative format and features interviews with various townspeople of Wiscasset concerning their occupations; from the interviews, information is presented about training needed,…

Individual Differences in Beginning Composing: An Orchestral Vision of Learning To Write. Technical Report No. 9.

ERIC Educational Resources Information Center

Dyson, Anne Haas

A participant observation study of a primary grade classroom, in which three first grade students were selected as case study subjects, illustrates the range of workstyles of beginning writers. Primary grade teachers are often concerned that their students are not producing writing comparable with their capabilities, but educators' conceptions of…

An overview of silvicultural influences on loblolly pine veneer-basedpanel properties

Treesearch

Todd F. Shupe; Chung Y. Hse; Elvin T. Choong

1999-01-01

Loblolly pine (Pinus taeda L.) harvested from five silviculturally different stands was used to manufacture 13-ply laminated veneer lumber (LVL) and 3-ply plywood. LVL panels were assembled as either all A-grade or all C-grade veneer. Plywood panels were produced according to four different veneer grade layups (AAA, ACA, ACC, and...

Economics of Grading and Sorting Pallet Parts

Treesearch

Daniel L. Schmoldt; John A. McLeod; Philip A. Araman

1993-01-01

Before trying to develop an automated inspection system for pallet part grading we analyzed the economics of such a system. Our results suggest that higher quality pallets produced by grading and sorting pallet parts would be attractive to both manufacturers and their customers, who would have to pay increased prices for higher quality pallets. Reductions in cost-per-...

OPTIGRAMI: Optimum lumber grade mix program for hardwood dimension parts

Treesearch

David G. Martens; Jr., Robert L. Nevel; Jr. Nevel

1985-01-01

With rapidly increasing lumber prices and shortages of some grades and species, the furniture industry must find ways to use its hardwood lumber resource more efficiently. A computer program called OPTIGRAMI is designed to help managers determine the best lumber to use in producing furniture parts. OPTIGRAMI determines the least-cost grade mix of lumber required to...

Neoplasms of the Neuroendocrine Pancreas: An Update in the Classification, Definition, and Molecular Genetic Advances.

PubMed

Guilmette, Julie M; Nosé, Vania

2018-06-14

This review focuses on discussing the main modifications of the recently published 2017 WHO Classification of Neoplasms of the Neuroendocrine Pancreas (panNEN). Recent updates separate pancreatic neuroendocrine tumors into 2 broad categories: well-differentiated pancreatic neuroendocrine tumors (panNET) and poorly differentiated pancreatic neuroendocrine carcinoma (panNEC), and incorporates a new subcategory of "well-differentiated high-grade NET (G3)" to the well-differentiated NET category. This new classification algorithm aims to improve the prediction of clinical outcomes and survival and help clinicians select better therapeutic strategies for patient care and management. In addition, these neuroendocrine neoplasms are capable of producing large quantity of hormones leading to clinical hormone hypersecretion syndromes. These functioning tumors include, insulinomas, glucagonomas, somatostatinomas, gastrinomas, VIPomas, serotonin-producing tumors, and ACTH-producing tumors. Although most panNENs arise as sporadic diseases, a subset of these heterogeneous tumors present as parts on inherited genetic syndromes, such as multiple endocrine neoplasia type 1, von Hippel-Lindau, neurofibromatosis type 1, tuberous sclerosis, and glucagon cell hyperplasia and neoplasia syndromes. Characteristic clinical and morphologic findings for certain functioning and syndromic panNENs should alert both pathologists and clinicians as appropriate patient management and possible genetic counseling may be necessary.

Specific Features of After-School Program Quality: Associations with Children’s Functioning in Middle Childhood

PubMed Central

Bolt, Daniel M.; Vandell, Deborah Lowe

2010-01-01

This longitudinal study examined associations between three after-school program quality features (positive staff–child relations, available activities, programming flexibility) and child developmental outcomes (reading and math grades, work habits, and social skills with peers) in Grade 2 and then Grade 3. Participants (n = 120 in Grade 2, n = 91 in Grade 3) attended after-school programs more than 4 days per week, on average. Controlling for child and family background factors and children’s prior functioning on the developmental outcomes, positive staff–child relations in the programs were positively associated with children’s reading grades in both Grades 2 and 3, and math grades in Grade 2. Positive staff–child relations also were positively associated with social skills in Grade 2, for boys only. The availability of a diverse array of age-appropriate activities at the programs was positively associated with children’s math grades and classroom work habits in Grade 3. Programming flexibility (child choice of activities) was not associated with child outcomes. PMID:20336364

Development of a transplantable glioma tumour model from genetically engineered mice: MRI/MRS/MRSI characterisation.

PubMed

Ciezka, Magdalena; Acosta, Milena; Herranz, Cristina; Canals, Josep M; Pumarola, Martí; Candiota, Ana Paula; Arús, Carles

2016-08-01

The initial aim of this study was to generate a transplantable glial tumour model of low-intermediate grade by disaggregation of a spontaneous tumour mass from genetically engineered models (GEM). This should result in an increased tumour incidence in comparison to GEM animals. An anaplastic oligoastrocytoma (OA) tumour of World Health Organization (WHO) grade III was obtained from a female GEM mouse with the S100β-v-erbB/inK4a-Arf (+/-) genotype maintained in the C57BL/6 background. The tumour tissue was disaggregated; tumour cells from it were grown in aggregates and stereotactically injected into C57BL/6 mice. Tumour development was followed using Magnetic Resonance Imaging (MRI), while changes in the metabolomics pattern of the masses were evaluated by Magnetic Resonance Spectroscopy/Spectroscopic Imaging (MRS/MRSI). Final tumour grade was evaluated by histopathological analysis. The total number of tumours generated from GEM cells from disaggregated tumour (CDT) was 67 with up to 100 % penetrance, as compared to 16 % in the local GEM model, with an average survival time of 66 ± 55 days, up to 4.3-fold significantly higher than the standard GL261 glioblastoma (GBM) tumour model. Tumours produced by transplantation of cells freshly obtained from disaggregated GEM tumour were diagnosed as WHO grade III anaplastic oligodendroglioma (ODG) and OA, while tumours produced from a previously frozen sample were diagnosed as WHO grade IV GBM. We successfully grew CDT and generated tumours from a grade III GEM glial tumour. Freezing and cell culture protocols produced progression to grade IV GBM, which makes the developed transplantable model qualify as potential secondary GBM model in mice.

Pain neurophysiology education for the management of individuals with chronic low back pain: systematic review and meta-analysis.

PubMed

Clarke, Clare Louise; Ryan, Cormac Gerard; Martin, Denis J

2011-12-01

Pain neurophysiology education (PNE) is a form of education for patients with chronic low back pain (CLBP). The purpose of this systematic review was to investigate the evidence for PNE in the management of pateints with CLBP. A literature search of MEDLINE, CINAHL and AMED was performed from 1996(01)-2010(09). RCT appraisal and synthesis was assessed using the Cochrane Back Review Group (CBRG) guidelines. The main outcome measures were pain, physical-function, psychological-function, and social-function. Two moderate quality RCTs (n=122) were included in the final review. According to the CBRG criteria there was very low quality evidence that PNE is beneficial for pain, physical-function, psychological-function, and social-function. Meta-analysis found PNE produced statistically significant but clinically small improvements in short-term pain of 5mm (0, 10.0mm) [mean difference (95%CI)] on the 100mm VAS. This review was limited by the small number of studies (n=2) that met the inclusion criteria and by the fact that both studies were produced by the same group that published the PNE manual. These factors contributed to the relatively low grading of the evidence. There is a need for more studies investigating PNE by different research groups to support early promising findings. Until then firm clinical recommendations cannot be made. Copyright © 2011 Elsevier Ltd. All rights reserved.

The kidney in the pathogenesis of hypertension: the role of renal nerves.

PubMed

DiBona, G F

1985-04-01

The intrinsic efferent innervation of the kidney consists of exclusively noradrenergic fibers that innervate the preglomerular and postgomerular vasculature, all elements of the juxtagomerular apparatus and virtually all segments of the nephron in both cortical and medullo-papillary regions. Increases in efferent renal sympathetic nerve activity produce renal vasoconstriction, release of renin, catecholamines, prostaglandins and other vasoactive substances, and increases in renal tubular sodium reabsorption; these responses are graded and differentiated. The intrinsic afferent innervation of the kidney consists of mechanoreceptors and chemoreceptors which participate in reno-renal and reno-systemic reflexes that modulate sympathetic neural outflow in an organ-specific differentiated pattern. Therefore, alterations in efferent and afferent renal nerve activity produce changes in several important renal functions known to contribute to the development and maintenance of hypertension.

Gut Microbiota Mediates the Protective Effects of Dietary Capsaicin against Chronic Low-Grade Inflammation and Associated Obesity Induced by High-Fat Diet.

PubMed

Kang, Chao; Wang, Bin; Kaliannan, Kanakaraju; Wang, Xiaolan; Lang, Hedong; Hui, Suocheng; Huang, Li; Zhang, Yong; Zhou, Ming; Chen, Mengting; Mi, Mantian

2017-05-23

Metabolic endotoxemia originating from dysbiotic gut microbiota has been identified as a primary mediator for triggering the chronic low-grade inflammation (CLGI) responsible for the development of obesity. Capsaicin (CAP) is the major pungent bioactivator in chili peppers and has potent anti-obesity functions, yet the mechanisms linking this effect to gut microbiota remain obscure. Here we show that mice fed a high-fat diet (HFD) supplemented with CAP exhibit lower levels of metabolic endotoxemia and CLGI associated with lower body weight gain. High-resolution responses of the microbiota were examined by 16S rRNA sequencing, short-chain fatty acid (SCFA) measurements, and phylogenetic reconstruction of unobserved states (PICRUSt) analysis. The results showed, among others, that dietary CAP induced increased levels of butyrate-producing Ruminococcaceae and Lachnospiraceae , while it caused lower levels of members of the lipopolysaccharide (LPS)-producing family S24_7. Predicted function analysis (PICRUSt) showed depletion of genes involved in bacterial LPS synthesis in response to CAP. We further identified that inhibition of cannabinoid receptor type 1 (CB 1 ) by CAP also contributes to prevention of HFD-induced gut barrier dysfunction. Importantly, fecal microbiota transplantation experiments conducted in germfree mice demonstrated that dietary CAP-induced protection against HFD-induced obesity is transferrable. Moreover, microbiota depletion by a cocktail of antibiotics was sufficient to block the CAP-induced protective phenotype against obesity, further suggesting the role of microbiota in this context. Together, our findings uncover an interaction between dietary CAP and gut microbiota as a novel mechanism for the anti-obesity effect of CAP acting through prevention of microbial dysbiosis, gut barrier dysfunction, and chronic low-grade inflammation. IMPORTANCE Metabolic endotoxemia due to gut microbial dysbiosis is a major contributor to the pathogenesis of chronic low-grade inflammation (CLGI), which primarily mediates the development of obesity. A dietary strategy to reduce endotoxemia appears to be an effective approach for addressing the issue of obesity. Capsaicin (CAP) is the major pungent component in red chili (genus Capsicum ). Little is known about the role of gut microbiota in the anti-obesity effect of CAP. High-throughput 16S rRNA gene sequencing revealed that CAP significantly increased butyragenic bacteria and decreased LPS-producing bacteria (e.g., members of the S24-7 family) and LPS biosynthesis. By using antibiotics and microbiota transplantation, we prove that gut microbiota plays a causal role in dietary CAP-induced protective phenotype against high-fat-diet-induced CLGI and obesity. Moreover, CB 1 inhibition was partially involved in the beneficial effect of CAP. Together, these data suggest that the gut microbiome is a critical factor for the anti-obesity effects of CAP. Copyright © 2017 Kang et al.

Acoustic wave propagation in continuous functionally graded plates: an extension of the Legendre polynomial approach.

PubMed

Lefebvre, J E; Zhang, V; Gazalet, J; Gryba, T; Sadaune, V

2001-09-01

The propagation of guided waves in continuous functionally graded plates is studied by using Legendre polynomials. Dispersion curves, and power and field profiles are easily obtained. Our computer program is validated by comparing our results against other calculations from the literature. Numerical results are also given for a graded semiconductor plate. It is felt that the present method could be of quite practical interest in waveguiding engineering, non-destructive testing of functionally graded materials (FGMs) to identify the best inspection strategies, or by means of a numerical inversion algorithm to determine through-thickness gradients in material parameters.

Distinct pattern separation related transfer functions in human CA3/dentate and CA1 revealed using high-resolution fMRI and variable mnemonic similarity

PubMed Central

Lacy, Joyce W.; Yassa, Michael A.; Stark, Shauna M.; Muftuler, L. Tugan; Stark, Craig E.L.

2011-01-01

Producing and maintaining distinct (orthogonal) neural representations for similar events is critical to avoiding interference in long-term memory. Recently, our laboratory provided the first evidence for separation-like signals in the human CA3/dentate. Here, we extended this by parametrically varying the change in input (similarity) while monitoring CA1 and CA3/dentate for separation and completion-like signals using high-resolution fMRI. In the CA1, activity varied in a graded fashion in response to increases in the change in input. In contrast, the CA3/dentate showed a stepwise transfer function that was highly sensitive to small changes in input. PMID:21164173

Preparation of Functionally Graded Materials (FGMs) Using Coal Fly Ash and NiCr-Based Alloy Powder by Spark Plasma Sintering (SPS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaneko, Gen-yo; Kitagawa, Hiroyuki; Hasezaki, Kazuhiro

2008-02-15

Functionally Graded Materials (FGMs) were prepared by spark plasma sintering (SPS) using coal fly ash and NiCr alloy powder. The coal fly ash was produced by the Misumi Coal Thermal Power Station (Chugoku Electric Power Co., Inc.), with 80 wt% nickel and 20 wt% chromium (Fukuda Metal Foil and Powder Co., Ltd.) used as source materials. The sintering temperature in the graphite die was 1000 deg. C. X-ray diffraction patterns of the sintered coal fly ash materials indicated that mullite (3Al{sub 2}O{sub 3}{center_dot}2SiO{sub 2}) and silica (SiO{sub 2}) phases were predominant. Direct joining of coal fly ash and NiCr causesmore » fracture at the interface. This is due to the mismatch in the thermal expansion coefficients (CTE). A crack in the FGM was observed between the two layers with a CTE difference of over 4.86x10{sup -6} K{sup -1}, while a crack in the FGM was difficult to detect when the CTE difference was less than 2.77x10{sup -6} K{sup -1}.« less

Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal

NASA Astrophysics Data System (ADS)

Hosseini, Vahid A.; Thuvander, Mattias; Wessman, Sten; Karlsson, Leif

2018-07-01

Low-temperature phase separations (T < 500 °C), resulting in changes in mechanical and corrosion properties, of super duplex stainless steel (SDSS) base and weld metals were investigated for short heat treatment times (0.5 to 600 minutes). A novel heat treatment technique, where a stationary arc produces a steady state temperature gradient for selected times, was employed to fabricate functionally graded materials. Three different initial material conditions including 2507 SDSS, remelted 2507 SDSS, and 2509 SDSS weld metal were investigated. Selective etching of ferrite significantly decreased in regions heat treated at 435 °C to 480 °C already after 3 minutes due to rapid phase separations. Atom probe tomography results revealed spinodal decomposition of ferrite and precipitation of Cu particles. Microhardness mapping showed that as-welded microstructure and/or higher Ni content accelerated decomposition. The arc heat treatment technique combined with microhardness mapping and electrolytical etching was found to be a successful approach to evaluate kinetics of low-temperature phase separations in SDSS, particularly at its earlier stages. A time-temperature transformation diagram was proposed showing the kinetics of 475 °C-embrittlement in 2507 SDSS.

Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal

NASA Astrophysics Data System (ADS)

Hosseini, Vahid A.; Thuvander, Mattias; Wessman, Sten; Karlsson, Leif

2018-04-01

Low-temperature phase separations (T < 500 °C), resulting in changes in mechanical and corrosion properties, of super duplex stainless steel (SDSS) base and weld metals were investigated for short heat treatment times (0.5 to 600 minutes). A novel heat treatment technique, where a stationary arc produces a steady state temperature gradient for selected times, was employed to fabricate functionally graded materials. Three different initial material conditions including 2507 SDSS, remelted 2507 SDSS, and 2509 SDSS weld metal were investigated. Selective etching of ferrite significantly decreased in regions heat treated at 435 °C to 480 °C already after 3 minutes due to rapid phase separations. Atom probe tomography results revealed spinodal decomposition of ferrite and precipitation of Cu particles. Microhardness mapping showed that as-welded microstructure and/or higher Ni content accelerated decomposition. The arc heat treatment technique combined with microhardness mapping and electrolytical etching was found to be a successful approach to evaluate kinetics of low-temperature phase separations in SDSS, particularly at its earlier stages. A time-temperature transformation diagram was proposed showing the kinetics of 475 °C-embrittlement in 2507 SDSS.

Calculation and word problem-solving skills in primary grades - Impact of cognitive abilities and longitudinal interrelations with task-persistent behaviour.

PubMed

Jõgi, Anna-Liisa; Kikas, Eve

2016-06-01

Primary school math skills form a basis for academic success down the road. Different math skills have different antecedents and there is a reason to believe that more complex math tasks require better self-regulation. The study aimed to investigate longitudinal interrelations of calculation and problem-solving skills, and task-persistent behaviour in Grade 1 and Grade 3, and the effect of non-verbal intelligence, linguistic abilities, and executive functioning on math skills and task persistence. Participants were 864 students (52.3% boys) from 33 different schools in Estonia. Students were tested twice - at the end of Grade1 and at the end of Grade 3. Calculation and problem-solving skills, and teacher-rated task-persistent behaviour were measured at both time points. Non-verbal intelligence, linguistic abilities, and executive functioning were measured in Grade 1. Cross-lagged structural equation modelling indicated that calculation skills depend on previous math skills and linguistic abilities, while problem-solving skills require also non-verbal intelligence, executive functioning, and task persistence. Task-persistent behaviour in Grade 3 was predicted by previous problem-solving skills, linguistic abilities, and executive functioning. Gender and mother's educational level were added as covariates. The findings indicate that math skills and self-regulation are strongly related in primary grades and that solving complex tasks requires executive functioning and task persistence from children. Findings support the idea that instructional practices might benefit from supporting self-regulation in order to gain domain-specific, complex skill achievement. © 2015 The British Psychological Society.

Functionally graded biomimetic energy absorption concept development for transportation systems.

DOT National Transportation Integrated Search

2014-02-01

Mechanics of a functionally graded cylinder subject to static or dynamic axial loading is considered, including a potential application as energy absorber. The mass density and stiffness are power functions of the radial coordinate as may be the case...

STUDIES ON LUNG INJURIES FOLLOWING ROENTGEN TREATMENT OF BREAST CANCER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ichikawa, H.; Arai, T.

1960-01-01

Of 102 cases of breast cancer treated by x rays, 46 (45%) showed rcentgenographic evidence of lung flbrosis. A special chest phantom was constructed to measure the dose distribution within the lungs. The highest dose in the lung, by McWhirter's technique of radiation, was 150-160% of the surface. The parts of the lung where the tlssue received the highest dose were the upper, anterior, and outside parts of the radiated lung. This result was the same as indicated in the roentgenographic study. The lung radiation reaction was parallel to the skin reaction. The age had no relation to the fibrosis,more » but 4 cases, who had marked tuberculous calcification in their lung fields, seemed to have a tendency to produce considerable fibrosis by radiation. The sympton of pneumonitis was generally slight, and the general condition of the patients was not greatly influenced as a rule. The functional lung test showed almost normal results in the cases of grade I and grade II, but considerable injury in the cases of grade III, independent of their subjective symptoms. (Abstr. Japan Med., 1: No. 10, 1961)« less

Socioeconomic inequalities in physical and mental functioning of Japanese civil servants: explanations from work and family characteristics.

PubMed

Sekine, Michikazu; Chandola, Tarani; Martikainen, Pekka; Marmot, Michael; Kagamimori, Sadanobu

2006-07-01

Poor physical and mental functioning is more common among people of low socioeconomic status (SES) and those with disadvantaged work and family characteristics. This study aims to clarify whether the SES inequalities in functioning can be explained by the SES differences in work and family characteristics. The subjects were 3787 male and female civil servants, aged 20-65, working in a local government on the west coast of Japan. Logistic regression analysis was performed to examine (1) whether there were employment-grade (SES) differences in poor physical and mental functioning as measured by the Short Form 36 (SF-36) and (2) whether these SES differences were explained by work and family characteristics. In general, low control at work, high demands, low social support, short and long work hours, shift work, being unmarried, high family-to-work conflict and high work-to-family conflict were independently associated with poor physical and mental functioning in both men and women. In men, the age-adjusted odds ratio (OR) of low-grade employees for poor physical functioning was 1.93 (95% confidence interval: 1.38-2.69) in comparison to high-grade employees. The grade difference was mildly attenuated, when adjusted for work and family characteristics (OR = 1.72)(1.20-2.47). The age-adjusted OR of the low-grade employees for poor mental functioning was 1.88 (1.29-2.74). The grade difference was attenuated and no longer significant when adjusted for work and family characteristics (OR = 1.51)(0.99-2.31). Among women, there were no significant grade-differences in poor physical and mental functioning. Although longitudinal research is necessary to clarify the causal nature of these associations, improvements in SES differences in work and family characteristics may be important for reducing SES inequalities in physical and mental functioning among Japanese men. The different patterns of SES inequalities in health between men and women deserve further research.

Thermoelectric as recovery and harvesting of waste heat from portable generator

NASA Astrophysics Data System (ADS)

Mustafa, S. N.; Kamarrudin, N. S.; Hashim, M. S. M.; Bakar, S. A.; Razlan, Z. M.; Harun, A.; Ibrahim, I.; Faizi, M. K.; Saad, M. A. M.; Zunaidi, I.; Wan, W. K.; Desa, H.

2017-10-01

Generation of waste heat was ineluctable especially during energy producing process. Waste heat falls into low temperature grade make it complicated to utilize. Thermoelectric generator (TEG) offers opportunity to harvest any temperature grade heat into useful electricity. This project is covered about recovery and utilizing waste heat from portable electric generator by using a TEG which placed at exhaust surface. Temperature difference at both surfaces of TEG was enhanced with supplying cold air from a wind blower. It is found that, even at low air speed, the TEG was successfully produced electricity with aid from DC-DC booster. Results shows possibility to harvest low temperature grade heat and still exist areas for continual improvement.

A Progression in First-Grade Children's Thinking about Variable and Variable Notation in Functional Relationships

ERIC Educational Resources Information Center

Blanton, Maria; Brizuela, Bárbara M.; Gardiner, Angela Murphy; Sawrey, Katie; Newman-Owens, Ashley

2017-01-01

Recent research suggests that children in elementary grades have some facility with variable and variable notation in ways that warrant closer attention. We report here on an empirically developed progression in first-grade children's thinking about these concepts in functional relationships. Using learning trajectories research as a framework for…

A better norm-referenced grading using the standard deviation criterion.

PubMed

Chan, Wing-shing

2014-01-01

The commonly used norm-referenced grading assigns grades to rank-ordered students in fixed percentiles. It has the disadvantage of ignoring the actual distance of scores among students. A simple norm-referenced grading via standard deviation is suggested for routine educational grading. The number of standard deviation of a student's score from the class mean was used as the common yardstick to measure achievement level. Cumulative probability of a normal distribution was referenced to help decide the amount of students included within a grade. RESULTS of the foremost 12 students from a medical examination were used for illustrating this grading method. Grading by standard deviation seemed to produce better cutoffs in allocating an appropriate grade to students more according to their differential achievements and had less chance in creating arbitrary cutoffs in between two similarly scored students than grading by fixed percentile. Grading by standard deviation has more advantages and is more flexible than grading by fixed percentile for norm-referenced grading.

Olympic Scoring of English Compositions

ERIC Educational Resources Information Center

Follman, John; Panther, Edward

1974-01-01

Examines empirically the efficacy of utilizing Olympic diving and gymnastic scoring systems for grading graduate students' English compositions. Results indicated that such scoring rules do not produce ratings different in reliability or in level from conventional letter grades. (ED)

Lumber yield and log values of Shasta red fir.

Treesearch

John B. Grantham; Douglas L. Hunt

1963-01-01

The value of lumber produced from each of 362 Shasta red fir logs of southern Oregon was determined through a cooperative study in 1960. Lumber grade yield from each log provided the basis for calculating the comparative value of each log grade-log diameter class, in accordance with grading and scaling practices used both east and west of the...

Log-grade volume distribution prediction models for tree species in red oak-sweetgum stands on US mid-south minor stream bottoms

Treesearch

George M. Banzhaf; Thomas G. Matney; Emily B. Schultz; James S. Meadows; J. Paul Jeffreys; William C. Booth; Gan Li; Andrew W. Ezell; Theodor D. Leininger

2016-01-01

Red oak (Quercus section Labatae)-sweetgum (Liquidambar styraciflua L.) stands growing on mid-south bottomland sites in the United States are well known for producing high-quality grade hardwood logs, but models for estimating the quantity and quality of standing grade wood in these stands have been unavailable. Prediction...

Effect of right ventricular pacing lead site on left ventricular function in patients with high-grade atrioventricular block: results of the Protect-Pace study.

PubMed

Kaye, Gerald C; Linker, Nicholas J; Marwick, Thomas H; Pollock, Lucy; Graham, Laura; Pouliot, Erika; Poloniecki, Jan; Gammage, Michael

2015-04-07

Chronic right ventricle (RV) apical (RVA) pacing is standard treatment for an atrioventricular (AV) block but may be deleterious to left ventricle (LV) systolic function. Previous clinical studies of non-apical pacing have produced conflicting results. The aim of this randomized, prospective, international, multicentre trial was to compare change in LV ejection fraction (LVEF) between right ventricular apical and high septal (RVHS) pacing over a 2-year study period. We randomized 240 patients (age 74 ± 11 years, 67% male) with a high-grade AV block requiring >90% ventricular pacing and preserved baseline LVEF >50%, to receive pacing at the RVA (n = 120) or RVHS (n = 120). At 2 years, LVEF decreased in both the RVA (57 ± 9 to 55 ± 9%, P = 0.047) and the RVHS groups (56 ± 10 to 54 ± 10%, P = 0.0003). However, there was no significant difference in intra-patient change in LVEF between confirmed RVA (n = 85) and RVHS (n = 83) lead position (P = 0.43). There were no significant differences in heart failure hospitalization, mortality, the burden of atrial fibrillation, or plasma brain natriutetic peptide levels between the two groups. A significantly greater time was required to place the lead in the RVHS position (70 ± 25 vs. 56 ± 24 min, P < 0.0001) with longer fluoroscopy times (11 ± 7 vs. 5 ± 4 min, P < 0.0001). In patients with a high-grade AV block and preserved LV function requiring a high percentage of ventricular pacing, RVHS pacing does not provide a protective effect on left ventricular function over RVA pacing in the first 2 years. ClinicalTrials.gov number NCT00461734. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

Thermo-Electro-Mechanical Analysis of a Curved Functionally Graded Piezoelectric Actuator with Sandwich Structure.

PubMed

Yan, Zhi; Zaman, Mostafa; Jiang, Liying

2011-12-12

In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g 31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment.

Is the Sky Falling? Grade Inflation and the Signaling Power of Grades

ERIC Educational Resources Information Center

Pattison, Evangeleen; Grodsky, Eric; Muller, Chandra

2013-01-01

Grades are the fundamental currency of our educational system; they signal academic achievement and noncognitive skills to parents, employers, postsecondary gatekeepers, and students themselves. Grade inflation compromises the signaling value of grades and undermines their capacity to achieve the functions for which they are intended. We challenge…

Method and system for producing sputtered thin films with sub-angstrom thickness uniformity or custom thickness gradients

DOEpatents

Folta, James A.; Montcalm, Claude; Walton, Christopher

2003-01-01

A method and system for producing a thin film with highly uniform (or highly accurate custom graded) thickness on a flat or graded substrate (such as concave or convex optics), by sweeping the substrate across a vapor deposition source with controlled (and generally, time-varying) velocity. In preferred embodiments, the method includes the steps of measuring the source flux distribution (using a test piece that is held stationary while exposed to the source), calculating a set of predicted film thickness profiles, each film thickness profile assuming the measured flux distribution and a different one of a set of sweep velocity modulation recipes, and determining from the predicted film thickness profiles a sweep velocity modulation recipe which is adequate to achieve a predetermined thickness profile. Aspects of the invention include a practical method of accurately measuring source flux distribution, and a computer-implemented method employing a graphical user interface to facilitate convenient selection of an optimal or nearly optimal sweep velocity modulation recipe to achieve a desired thickness profile on a substrate. Preferably, the computer implements an algorithm in which many sweep velocity function parameters (for example, the speed at which each substrate spins about its center as it sweeps across the source) can be varied or set to zero.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, Mark C.

High-purity graphite is the core structural material of choice in the Very High Temperature Reactor (VHTR) design, a graphite-moderated, helium-cooled configuration capable of producing thermal energy for power generation as well as process heat for industrial applications that require temperatures higher than the outlet temperatures of present nuclear reactors. The Baseline Graphite Characterization Program is establishing accurate as-manufactured mechanical and physical property distributions in nuclear-grade graphites by providing comprehensive data that captures the level of variation in measured values. In addition to providing a thorough comparison between these values in different graphite grades, the program is also carefully tracking individualmore » specimen source, position, and orientation information in order to provide comparisons both in specific properties and in the associated variability between different lots, different billets, and different positions from within a single billet. This report is a preliminary comparison between each of the grades of graphite that are considered “candidate” grades from four major international graphite producers. These particular grades (NBG-18, NBG-17, PCEA, IG-110, and 2114) are the major focus of the evaluations presently underway on irradiated graphite properties through the series of Advanced Graphite Creep (AGC) experiments. NBG-18, a medium-grain pitch coke graphite from SGL from which billets are formed via vibration molding, was the favored structural material in the pebble-bed configuration. NBG-17 graphite from SGL is essentially NBG-18 with the grain size reduced by a factor of two. PCEA, petroleum coke graphite from GrafTech with a similar grain size to NBG-17, is formed via an extrusion process and was initially considered the favored grade for the prismatic layout. IG-110 and 2114, from Toyo Tanso and Mersen (formerly Carbone Lorraine), respectively, are fine-grain grades produced via an isomolding process. An analysis of the comparison between each of these grades will include not only the differences in fundamental and statistically-significant individual strength levels, but also the differences in the overall variability in properties within each of the grades that will ultimately provide the basis for predicting in-service performance. The comparative performance of the different types of nuclear-grade graphites will naturally continue to evolve as thousands more specimens are fully characterized with regard to strength, physical properties, and thermal performance from the numerous grades of graphite being evaluated.« less

Benefits of music training are widespread and lifelong: a bibliographic review of their non-musical effects.

PubMed

Dawson, William J

2014-06-01

Recent publications indicate that musical training has effects on non-musical activities, some of which are lifelong. This study reviews recent publications collected from the Performing Arts Medicine Association bibliography. Music training, whether instrumental or vocal, produces beneficial and long-lasting changes in brain anatomy and function. Anatomic changes occur in brain areas devoted to hearing, speech, hand movements, and coordination between both sides of the brain. Functional benefits include improved sound processing and motor skills, especially in the upper extremities. Training benefits extend beyond music skills, resulting in higher IQs and school grades, greater specialized sensory and auditory memory/recall, better language memory and processing, heightened bilateral hand motor functioning, and improved integration and synchronization of sensory and motor functions. These changes last long after music training ends and can minimize or prevent age-related loss of brain cells and some mental functions. Early institution of music training and prolonged duration of training both appear to contribute to these positive changes.

From skin biopsy to neurons through a pluripotent intermediate under Good Manufacturing Practice protocols.

PubMed

Karumbayaram, Saravanan; Lee, Peiyee; Azghadi, Soheila F; Cooper, Aaron R; Patterson, Michaela; Kohn, Donald B; Pyle, April; Clark, Amander; Byrne, James; Zack, Jerome A; Plath, Kathrin; Lowry, William E

2012-01-01

The clinical application of human-induced pluripotent stem cells (hiPSCs) requires not only the production of Good Manufacturing Practice-grade (GMP-grade) hiPSCs but also the derivation of specified cell types for transplantation under GMP conditions. Previous reports have suggested that hiPSCs can be produced in the absence of animal-derived reagents (xenobiotics) to ease the transition to production under GMP standards. However, to facilitate the use of hiPSCs in cell-based therapeutics, their progeny should be produced not only in the absence of xenobiotics but also under GMP conditions requiring extensive standardization of protocols, documentation, and reproducibility of methods and product. Here, we present a successful framework to produce GMP-grade derivatives of hiPSCs that are free of xenobiotic exposure from the collection of patient fibroblasts, through reprogramming, maintenance of hiPSCs, identification of reprogramming vector integration sites (nrLAM-PCR), and finally specification and terminal differentiation of clinically relevant cells. Furthermore, we developed a primary set of Standard Operating Procedures for the GMP-grade derivation and differentiation of these cells as a resource to facilitate widespread adoption of these practices.

Non-invasive mapping of bilateral motor speech areas using navigated transcranial magnetic stimulation and functional magnetic resonance imaging.

PubMed

Könönen, Mervi; Tamsi, Niko; Säisänen, Laura; Kemppainen, Samuli; Määttä, Sara; Julkunen, Petro; Jutila, Leena; Äikiä, Marja; Kälviäinen, Reetta; Niskanen, Eini; Vanninen, Ritva; Karjalainen, Pasi; Mervaala, Esa

2015-06-15

Navigated transcranial magnetic stimulation (nTMS) is a modern precise method to activate and study cortical functions noninvasively. We hypothesized that a combination of nTMS and functional magnetic resonance imaging (fMRI) could clarify the localization of functional areas involved with motor control and production of speech. Navigated repetitive TMS (rTMS) with short bursts was used to map speech areas on both hemispheres by inducing speech disruption during number recitation tasks in healthy volunteers. Two experienced video reviewers, blinded to the stimulated area, graded each trial offline according to possible speech disruption. The locations of speech disrupting nTMS trials were overlaid with fMRI activations of word generation task. Speech disruptions were produced on both hemispheres by nTMS, though there were more disruptive stimulation sites on the left hemisphere. Grade of the disruptions varied from subjective sensation to mild objectively recognizable disruption up to total speech arrest. The distribution of locations in which speech disruptions could be elicited varied among individuals. On the left hemisphere the locations of disturbing rTMS bursts with reviewers' verification followed the areas of fMRI activation. Similar pattern was not observed on the right hemisphere. The reviewer-verified speech disruptions induced by nTMS provided clinically relevant information, and fMRI might explain further the function of the cortical area. nTMS and fMRI complement each other, and their combination should be advocated when assessing individual localization of speech network. Copyright © 2015 Elsevier B.V. All rights reserved.

Drugs of abuse and virus susceptibility.

PubMed

Friedman, H; Klein, T; Specter, S; Pross, S; Newton, C; Blanchard, D K; Widen, R

1988-01-01

It is widely recognized that various microorganisms including viruses have immunomodulatory effects and, under appropriate circumstances, may markedly suppress the immune response mechanisms. Cannabinoids present in marijuana also have immunomodulatory effects. In the present studies THC as well as its metabolic product 11-OH THC were studied in regard to their effects in vivo and in vitro on selected parameters of the immune response system known to be important in antiviral resistance, including immunity to retroviruses. Cannabinoids markedly suppressed the ability of murine macrophages to spread on glass (an important functional marker of macrophages) as well as to phagocytize yeast particles. Splenic macrophage cultures treated with the cannabinoids also were deficient in their ability to produce interleukin 1 on appropriate stimulation with bacterial LPS. Spleen cells capable of producing antibody to sheep erythrocytes when stimulated with this antigen in vitro were markedly affected when treated with graded doses of THC or 11-OH THC. Furthermore, the blastogenic responsiveness of normal mouse splenocytes to the T-cell mitogens Con A and PHA as well as the B-cell mitogen E. coli LPS was markedly suppressed by graded concentrations of the cannabinoids in doses that did not affect the viability of the cells. Natural killer cell activity of normal mouse spleen cells was also markedly inhibited by THC and 11-OH THC. Similarly, these cannabinoids suppressed the blastogenic responsiveness and NK activity of human peripheral blood leukocytes from normal individuals. The ability of mouse spleen cells to produce interferon on in vitro stimulation was also suppressed by THC. In addition, injection of THC into mice suppressed blastogenic responsiveness of spleen cells, NK activity, and the production of interferon by lymphoid cells. Thus, it was apparent that these cannabinoids had immunomodulatory effects, both in vivo and in vitro, at noncytotoxic small doses and impaired the ability of the lymphoid cells to express immune function necessary for antiviral resistance.

Embryo apoptosis identification: Oocyte grade or cleavage stage?

PubMed Central

Bakri, Noraina Mohd; Ibrahim, Siti Fatimah; Osman, Nurul Atikah; Hasan, Nurhaslina; Jaffar, Farah Hanan Fathihah; Rahman, Zulaiha Abdul; Osman, Khairul

2015-01-01

Apoptosis is a programed cell death that is vital for tissue homeostasis. However, embryo apoptosis had been known to be related to embryo fragmentation which should be avoided in in vitro fertilization (IVF). The purpose of this study was to evaluate the relationship of embryo apoptosis with the grade of immature oocytes and cleavage stage of in vitro produced (IVP) cattle embryos. This study consisted of 345 oocytes collected through ovary slicing. Immature oocytes were graded as A, B and C. This grading was based on cumulus cell thickness and compactness. All oocytes then underwent an in vitro maturation (IVM) procedure. An IVF was done 24 h after IVM culture. Prior to staining, stage of cleaved embryos was determined and classified as either 2, 4, 8 or >8-cell embryo stage. Apoptosis status of cleaved IVP embryos was determined by using annexin V-FITC staining technique at 48 and 72 h post insemination (hpi). Apoptosis status for each embryo was classified as either early or late. The result showed that there was no significant difference (p > 0.05) of apoptosis status among grade A, B and C embryos. All grades of oocytes showed embryo apoptosis where 1.5% late apoptosis for grade A, 4.5% and 10.4% of early and late apoptosis for grade B and grade C. Early apoptosis was not seen in grade A embryo. We also noted no significant difference (p > 0.05) of apoptosis status between 2, 4, 8 and >8-cell embryo stage. Early apoptosis was also not seen in >8-cell stage. Even though there were no differences in apoptosis expression between the three classes, the cleavage rate of grade A oocytes was significantly higher (p < 0.01) than grade B and grade C. In conclusion, the apoptosis expression in the embryo can occur regardless of the oocyte quality and the cleavage stage of the embryo produced. PMID:26858565

The Correlation between the Fourth Grade Students' Level of Functional Literacy and Metacognitive Awareness

ERIC Educational Resources Information Center

Özenç, Emine Gül; Dikici, Hidayet

2016-01-01

The present study aims at presenting the relationship between the fourth grade primary school students' level of functional literacy and metacognitive awareness. The study group of the research is made up of 406 fourth grade students attending school during 2015-2016 academic year in Nigde. This study adopts survey model and its data collection…

LEARNING EFFICIENCY AS A FUNCTION OF DEPICTION, VERBALIZATION, GRADE AND SOCIAL CLASS.

ERIC Educational Resources Information Center

ROHWER, WILLIAM D., JR.; AND OTHERS

LEARNING EFFICIENCY AS A FUNCTION OF DEPICTION, VERBALIZATION, GRADE LEVEL, AND SOCIAL CLASS WAS EXPLORED BY ASKING 384 KINDERGARTEN, FIRST-, THIRD-, AND SIXTH-GRADE CHILDREN FROM BOTH MIDDLE-CLASS AND LOWER-CLASS AREAS TO LEARN A LIST OF 24 PAIRED ASSOCIATES. ALL PAIRS WERE PRESENTED PICTORIALLY BY A STUDY-TEST METHOD FOR TWO LEARNING TRIALS. THE…

The Association Between Sleep Disordered Breathing, Academic Grades, and Cognitive and Behavioral Functioning Among Overweight Subjects During Middle to Late Childhood

PubMed Central

Beebe, Dean W.; Ris, M. Douglas; Kramer, Megan E.; Long, Elizabeth; Amin, Raouf

2010-01-01

Study Objectives: (1) to determine the associations of sleep disordered breathing (SDB) with behavioral functioning, cognitive test scores, and school grades during middle- to late-childhood, an under-researched developmental period in the SDB literature, and (2) to clarify whether associations between SDB and school grades are mediated by deficits in cognitive or behavioral functioning. Design: Cross-sectional correlative study. Setting: Office/hospital, plus reported functioning at home and at school. Participants: 163 overweight subjects aged 10-16.9 years were divided into 4 groups based upon their obstructive apnea+hypopnea index (AHI) during overnight polysomnography and parent report of snoring: Moderate-Severe OSA (AHI > 5, n = 42), Mild OSA (AHI = 1-5, n = 58), Snorers (AHI < 1 + snoring, n = 26), and No SDB (AHI < 1 and nonsnoring, n = 37). Measurements: Inpatient overnight polysomnography, parent- and self-report of school grades and sleep, parent- and teacher-report of daytime behaviors, and office-based neuropsychological testing. Results: The 4 groups significantly differed in academic grades and parent- and teacher-reported behaviors, particularly inattention and learning problems. These findings remained significant after adjusting for subject sex, race, socioeconomic status, and school night sleep duration. Associations with SDB were confined to reports of behavioral difficulties in real-world situations, and did not extend to office-based neuropsychological tests. Findings from secondary analyses were consistent with, but could not definitively confirm, a causal model in which SDB affects school grades via its impact on behavioral functioning. Conclusions: SDB during middle- to late-childhood is related to important aspects of behavioral functioning, especially inattention and learning difficulties, that may result in significant functional impairment at school. Citation: Beebe DW; Ris MD; Kramer ME; Long E; Amin R. The association between sleep disordered breathing, academic grades, and cognitive and behavioral functioning among overweight subjects during middle to late childhood. SLEEP 2010;33(11):1447-1456. PMID:21102986

Outcome assessment of lingual and labial appliances compared with cephalometric analysis, peer assessment rating, and objective grading system in Angle Class II extraction cases.

PubMed

Deguchi, Toru; Terao, Fumie; Aonuma, Tomo; Kataoka, Tomoki; Sugawara, Yasuyo; Yamashiro, Takashi; Takano-Yamamoto, Teruko

2015-05-01

To validate our hypothesis that there would be significant differences in treatment outcomes, including cephalometric values, degree of root resorption, occlusal indices, and functional aspect, between cases treated with labial and lingual appliances. Twenty-four consecutively treated Class II cases with extractions and lingual appliance were compared with 25 matched cases treated with extraction and labial appliance. Orthodontic treatment outcomes were evaluated by cephalometric analysis, peer assessment rating, and an objective grading system (OGS). Additionally, functional analysis was also performed in both groups after orthodontic treatment. Statistical comparison was performed using the Wilcoxon signed rank test within the groups, and the Mann-Whitney U-test was used to compare between the labial and lingual groups. The only significant difference between the groups was that the interincisal angle was larger in the lingual group than in the labial group. OGS evaluation showed that control over root angulation was significantly worse in the lingual group than in the labial group. There was no significant difference between groups in the amount of root resorption or in functional evaluation. Generally, lingual appliances offer comparable treatment results to those obtained with labial appliances. However, care should be taken with lingual appliances because they are more prone to produce uprighted incisors and root angulation.

Tree grades, yields and values for some Appalachian hardwoods

Treesearch

Robert A. Campbell

1951-01-01

Foresters ahve long recognized the need for a better method of appraising standing timber in terms of quality as well as volume of lumber that trees may be expected to produce. Because the range in price between high-grade lumber and low-grade lumber is extremely wide, a stand of high-quality timber is much more valuable than a low-quality stand. In spite of this,...

Ponderosa pine lumber recovery in Lakeview, Oregon area.

Treesearch

E.E. Matson

1955-01-01

During January 1955, a study was made at the American Forest Products Corporation mill in Lakeview, Oregon, to determine the grades of lumber that can be expected from ponderosa pine timber grown in the Lakeview area of Oregon. All logs cut for a full week at this mill were scaled and graded and all the lumber produced was graded and tallied on the green chain by...

A Situative Metaphor for Teacher Learning: The Case of University Tutors Learning to Grade Student Coursework

ERIC Educational Resources Information Center

Boyd, Pete; Bloxham, Sue

2014-01-01

In the continuing concern about academic standards in the higher education sector a great deal of emphasis has been placed on quality assurance procedures rather than on considering how university tutors learn to grade the quality of work produced by students. As part of a larger research project focused on how tutors grade student coursework,…

Aerial spraying of low-grade hardwood stands with 2,4,5-T in West Virginia

Treesearch

George W. Wendel

1966-01-01

Aerial application of herbicides to poor hardwood stands shows promise of being an effective aid in converting stands of low-grade hardwoods to conifers in West Virginia. Many of the sites now occupied by low-grade hardwoods are incapable of producing quality hardwoods - even under good management - and are generally much better suited to certain conifers, particularly...

Solar silicon via the Dow Corning process

NASA Technical Reports Server (NTRS)

Hunt, L. P.; Dosaj, V. D.

1979-01-01

Technical feasibility for high volume production of solar cell-grade silicon is investigated. The process consists of producing silicon from pure raw materials via the carbothermic reduction of quartz. This silicon was then purified to solar grade by impurity segregation during Czochralski crystal growth. Commercially available raw materials were used to produce 100 kg quantities of silicon during 60 hour periods in a direct arc reactor. This silicon produced single crystalline ingot, during a second Czochralski pull, that was fabricated into solar cells having efficiencies ranging from 8.2 percent to greater than 14 percent. An energy analysis of the entire process indicated a 5 month payback time.

Quality of life measures in glioma patients with different grades: A preliminary study.

PubMed

Mahalakshmi, P; Vanisree, A J

2015-01-01

Plethora of information exists in the literature on pathology of the glioma while prevailing research data on quality-of-life (QOL) of glioma patients marks dearth thus demanding more studies. In this study, we examined the QOL of different grades of glioma patients among the Chennai population in India. A total of 162 patients with different grades of glioma enrolled from August 2007 to February 2011, at their first contact to Department of Neurology and Neurosurgery, Government General Hospital, Chennai, India were included and their QOL was assessed by European Organization for Research and Treatment of Cancer Core QOL questionnaire (EORTC QLQc-30), EORTC brain cancer module (QLQ BN-20). Both low and high grade glioma (LGG and HGG) patients had poor mean scores in social functioning (87.0), physical functioning (82.0) and emotional functioning (75.2) and role functioning (58.9). The mean scores on cognitive functioning (61.9) and global QOL (60.3) were better. Age, Karnofsky performance status, World Health Organization grades showed significant associations with all functional scales. The percentage values were higher for symptoms of fatigue (76.9%), pain (71.5%), financial difficulties (77.6%) and appetite loss (38.46%) in both LGG and HGG. Similarly, with respect to QLQ-BN20 domains, HGG patients showed more symptoms than low grade with a significant correlation in communication deficit problems (P = 0.02), headache (P = 0.04), seizures (P < 0.01), hair loss (P < 0.05) than the other symptoms. This initial assessment suggests that an increasing burden of symptoms exists, with poor QOL and survival, which has become a major concern in different grades of glioma patients.

Readability of Trauma-Related Patient Education Materials From the American Academy of Orthopaedic Surgeons.

PubMed

Eltorai, Adam E M; P Thomas, Nathan; Yang, Heejae; Daniels, Alan H; Born, Christopher T

2016-02-01

According to the american medical association (AMA) and the national institutes of health (NIH), the recommended readability of patient education materials should be no greater than a sixth-grade reading level. The online patient education information produced by the american academy of orthopaedic surgeons (AAOS) may be too complicated for some patients to understand. This study evaluated whether the AAOS's online trauma-related patient education materials meet recommended readability guidelines for medical information. Ninety-nine articles from the "Broken Bones and Injuries" section of the AAOS-produced patient education website, orthoinfo.org, were analyzed for grade level readability using the Flesch-Kincaid formula, a widely-used and validated tool to evaluate the text reading level. Results for each webpage were compared to the AMA/NIH recommended sixth-grade reading level and the average reading level of U.S. adults (eighth-grade). The mean (SD) grade level readability for all patient education articles was 8.8 (1.1). All but three of the articles had a readability score above the sixth-grade level. The readability of the articles exceeded this level by an average of 2.8 grade levels (95% confidence interval, 2.6 - 3.0; P < 0.0001). Furthermore, the average readability of the articles exceeded the average reading skill level of U.S. adults (eighth grade) by nearly an entire grade level (95% confidence interval, 0.6-1.0; P < 0.0001). The majority of the trauma-related articles from the AAOS patient education website have readability levels that may make comprehension difficult for a substantial portion of the patient population.

Assessment of Chronological Effects of Irreversible Electroporation on Hilar Bile Ducts in a Porcine Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Jae Woong, E-mail: cooljay@korea.ac.kr; Lu, David S. K., E-mail: dlu@mednet.ucla.edu; Osuagwu, Ferdnand, E-mail: fosuagwu@mednet.ucla.edu

2013-11-07

PurposeTo evaluate the chronological effects of irreversible electroporation (IRE) on large hilar bile ducts in an in vivo porcine model correlated with computed tomography (CT) cholangiography and histopathology.Materials and MethodsTwelve IRE zones were made along hilar bile ducts intraoperatively under ultrasound (US)-guidance in 11 pigs. Paired electrodes were placed either on opposing sides of the bile duct (straddle [STR]) or both on one side of the bile duct (one-sided [OSD]). The shortest electrode-to-duct distance was classified as periductal (≤2 mm) or nonperiductal (>2 mm). CT cholangiography and laboratory tests were performed before IRE and again at 2 days, 4 weeks, and 8 weeks after IRE.more » Degree of bile duct injury were graded as follows: grade 0 = no narrowing; grade 1 = ≤50 % duct narrowing; grade 2 = >50 % narrowing without proximal duct dilatation; grade 3 = grade 2 with proximal duct dilatation; and grade 4 = grade 3 with enzyme elevation. Pigs were selected for killing and histopathology at 2 days, 4, and 8 weeks.ResultsNonperiductal electrode placement produced no long-term strictures in 5 of 5 ducts. Periductal electrode placement produced mild narrowing in 6 of 7 ducts: 5 grade 1 and 1 grade 2. None showed increased enzymes. There was no significant difference between STR versus OSD electrode placement. Histopathology showed minor but relatively greater ductal mural changes in narrowed ducts.ConclusionIn the larger hilar ducts, long-term patency and mural integrity appear resistant to IRE damage with the energy deposition used, especially if the electrode is not immediately periductal in position.« less

Joint mobilization forces and therapist reliability in subjects with knee osteoarthritis

PubMed Central

Tragord, Bradley S; Gill, Norman W; Silvernail, Jason L; Teyhen, Deydre S; Allison, Stephen C

2013-01-01

Objectives: This study determined biomechanical force parameters and reliability among clinicians performing knee joint mobilizations. Methods: Sixteen subjects with knee osteoarthritis and six therapists participated in the study. Forces were recorded using a capacitive-based pressure mat for three techniques at two grades of mobilization, each with two trials of 15 seconds. Dosage (force–time integral), amplitude, and frequency were also calculated. Analysis of variance was used to analyze grade differences, intraclass correlation coefficients determined reliability, and correlations assessed force associations with subject and rater variables. Results: Grade IV mobilizations produced higher mean forces (P<0.001) and higher dosage (P<0.001), while grade III produced higher maximum forces (P = 0.001). Grade III forces (Newtons) by technique (mean, maximum) were: extension 48, 81; flexion 41, 68; and medial glide 21, 34. Grade IV forces (Newtons) by technique (mean, maximum) were: extension 58, 78; flexion 44, 60; and medial glide 22, 30. Frequency (Hertz) ranged between 0.9–1.1 (grade III) and 1.4–1.6 (grade IV). Intra-clinician reliability was excellent (>0.90). Inter-clinician reliability was moderate for force and dosage, and poor for amplitude and frequency. Discussion: Force measurements were consistent with previously reported ranges and clinical constructs. Grade III and grade IV mobilizations can be distinguished from each other with differences for force and frequency being small, and dosage and amplitude being large. Intra-clinician reliability was excellent for all biomechanical parameters and inter-clinician reliability for dosage, the main variable of clinical interest, was moderate. This study quantified the applied forces among multiple clinicians, which may help determine optimal dosage and standardize care. PMID:24421632

MODELING FUNCTIONALLY GRADED INTERPHASE REGIONS IN CARBON NANOTUBE REINFORCED COMPOSITES

NASA Technical Reports Server (NTRS)

Seidel, G. D.; Lagoudas, D. C.; Frankland, S. J. V.; Gates, T. S.

2006-01-01

A combination of micromechanics methods and molecular dynamics simulations are used to obtain the effective properties of the carbon nanotube reinforced composites with functionally graded interphase regions. The multilayer composite cylinders method accounts for the effects of non-perfect load transfer in carbon nanotube reinforced polymer matrix composites using a piecewise functionally graded interphase. The functional form of the properties in the interphase region, as well as the interphase thickness, is derived from molecular dynamics simulations of carbon nanotubes in a polymer matrix. Results indicate that the functional form of the interphase can have a significant effect on all the effective elastic constants except for the effective axial modulus for which no noticeable effects are evident.

7 CFR 993.18 - Grade.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Grade. 993.18 Section 993.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order...

7 CFR 993.18 - Grade.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Grade. 993.18 Section 993.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order...

7 CFR 993.18 - Grade.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Grade. 993.18 Section 993.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order...

7 CFR 993.18 - Grade.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Grade. 993.18 Section 993.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order...

7 CFR 993.18 - Grade.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Grade. 993.18 Section 993.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order...

Characterization of solar-grade silicon produced by the SiF4-Na process

NASA Technical Reports Server (NTRS)

Sanjurjo, A.; Sancier, K. M.; Emerson, R. M.; Leach, S. C.; Minahan, J.

1986-01-01

A process was developed for producing low cost solar grade silicon by the reaction between SiF4 gas and sodium metal. The results of the characterization of the silicon are presented. These results include impurity levels, electronic properties of the silicon after crystal growth, and the performance of solar photovoltaic cells fabricated from wafers of the single crystals. The efficiency of the solar cells fabricated from semiconductor silicon and SiF4-Na silicon was the same.

Low cost solar array project: Experimental process system development unit for producing semiconductor-grade silicon using silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

The design, fabrication, and installation of an experimental process system development unit (EPSDU) were analyzed. Supporting research and development were performed to provide an information data base usable for the EPSDU and for technological design and economical analysis for potential scale-up of the process. Iterative economic analyses were conducted for the estimated product cost for the production of semiconductor grade silicon in a facility capable of producing 1000-MT/Yr.

Purified silicon production system

DOEpatents

Wang, Tihu; Ciszek, Theodore F.

2004-03-30

Method and apparatus for producing purified bulk silicon from highly impure metallurgical-grade silicon source material at atmospheric pressure. Method involves: (1) initially reacting iodine and metallurgical-grade silicon to create silicon tetraiodide and impurity iodide byproducts in a cold-wall reactor chamber; (2) isolating silicon tetraiodide from the impurity iodide byproducts and purifying it by distillation in a distillation chamber; and (3) transferring the purified silicon tetraiodide back to the cold-wall reactor chamber, reacting it with additional iodine and metallurgical-grade silicon to produce silicon diiodide and depositing the silicon diiodide onto a substrate within the cold-wall reactor chamber. The two chambers are at atmospheric pressure and the system is open to allow the introduction of additional source material and to remove and replace finished substrates.

Performance-based alternative assessments as a means of eliminating gender achievement differences on science tests

NASA Astrophysics Data System (ADS)

Brown, Norman Merrill

1998-09-01

Historically, researchers have reported an achievement difference between females and males on standardized science tests. These differences have been reported to be based upon science knowledge, abstract reasoning skills, mathematical abilities, and cultural and social phenomena. This research was designed to determine how mastery of specific science content from public school curricula might be evaluated with performance-based assessment models, without producing gender achievement differences. The assessment instruments used were Harcourt Brace Educational Measurement's GOALSsp°ler: A Performance-Based Measure of Achievement and the performance-based portion of the Stanford Achievement Testspcopyright, Ninth Edition. The identified independent variables were test, gender, ethnicity, and grade level. A 2 x 2 x 6 x 12 (test x gender x ethnicity x grade) factorial experimental design was used to organize the data. A stratified random sample (N = 2400) was selected from a national pool of norming data: N = 1200 from the GOALSsp°ler group and N = 1200 from the SAT9spcopyright group. The ANOVA analysis yielded mixed results. The factors of test, gender, ethnicity by grade, gender by grade, and gender by grade by ethnicity failed to produce significant results (alpha = 0.05). The factors yielding significant results were ethnicity, grade, and ethnicity by grade. Therefore, no significant differences were found between female and male achievement on these performance-based assessments.

Social and Academic Expectations about High School for At-Risk Rural Youth

ERIC Educational Resources Information Center

Stein, Gabriela Livas; Hussong, Andrea

2007-01-01

This study examines high school expectancies in a sample of at-risk, rural youth, and how these expectancies relate to 8th grade functioning, 9th grade functioning, and 9th grade experiences of high school. A total of 76 eighth-graders and their parents, drawn from a larger study of the transition to high school, participated in interviews the…

New functionally dioecious bush tomato from northwestern Australia, Solanum ossicruentum, may utilize "trample burr" dispersal.

PubMed

Martine, Christopher T; Cantley, Jason T; Frawley, Emma S; Butler, Alice R; Jordon-Thaden, Ingrid E

2016-01-01

A new Australian species of functionally dioecious bush tomato of Solanum subgenus Leptostemonum is described. Solanum ossicruentum Martine & J.Cantley, sp. nov., is thought to be allied with members of the problematic "Dioicum Complex" lineage, but differs in its short silvery indumentum, long calyx lobes, larger stature, and an unusual fruit morphology that may represent "trample burr" seed dispersal. The species occurs in a range extending from the eastern Kimberley in Western Australia to far northwestern Northern Territory and has been recognized for decades as a variant of Solanum dioicum W.Fitzg. Specimens of this species were previously referred to by D.E. Symon and others as Solanum dioicum 'Tanami.' Ex situ crossing studies and SEM images of inaperturate pollen grains produced in morphologically hermaphrodite flowers indicate that this taxon is functionally dioecious. The scientific name was chosen with the help of 150 seventh grade life science students from Pennsylvania, USA.

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part three: aerobic exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Mizusaki Imoto, Aline; Toupin-April, Karine; Westby, Marie; Álvarez Gallardo, Inmaculada C; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective aerobic exercise programs and provide clinicians and patients with updated, high-quality recommendations concerning traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with strengthening exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+, or D-) was used, based on statistical significance ( P < 0.5) and clinical importance (⩾15% improvement). The five high-quality studies included demonstrated that various aerobic training exercises are generally effective for improving knee osteoarthritis within a 12-week period. An aerobic exercise program demonstrated significant improvement for pain relief (Grade B), physical function (Grade B) and quality of life (Grade C+). Aerobic exercise in combination with strengthening exercises showed significant improvement for pain relief (3 Grade A) and physical function (2 Grade A, 2 Grade B). A short-term aerobic exercise program with/without muscle strengthening exercises is promising for reducing pain, improving physical function and quality of life for individuals with knee osteoarthritis.

A CURRICULUM FOR ENGLISH, STUDENT PACKET, GRADE 7.

ERIC Educational Resources Information Center

Nebraska Univ., Lincoln. Curriculum Development Center.

THE SEVENTH-GRADE STUDENT PACKET, PRODUCED BY THE NEBRASKA CURRICULUM DEVELOPMENT CENTER, BEGINS WITH THE UNIT ENTITLED "THE MAKING OF STORIES" IN WHICH STUDENTS CONSIDER WRITERS' AUDIENCES AND METHODS OF COMPOSITION AND PRESENTATION. SUCH MATERIAL AS "A CHRISTMAS CAROL" AND SELECTIONS FROM "THE…

Designing, producing, and constructing fine-graded hot mix asphalt on Illinois roadways.

DOT National Transportation Integrated Search

2015-04-01

Fine-graded (F-G) asphalt concrete mixtures are composed of an aggregate structure in which the fine fraction controls the : load-carrying capacity of the mix. Other states have reported benefits in using F-G mixtures, including improved compaction, ...

7 CFR 959.103 - Registered handler.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ONIONS GROWN IN SOUTH TEXAS Rules... operates an established packing house within the production area with commonly accepted adequate facilities for grading and packing onions for market, and who customarily buys onions from producers for grading...

Teaching Mathematical Functions Using Geometric Functions Approach and Its Effect on Ninth Grade Students' Motivation

ERIC Educational Resources Information Center

Akçakin, Veysel

2018-01-01

The purpose of this study is to investigate the effects of using geometric functions approach on 9th grade students' motivation levels toward mathematics in functions unit. Participants of this study were 87 students who were ongoing in the first year of high school in Turkey. In this research, pretest and posttest control group quasiexperimental…

Quantum confinement of exciton-polaritons in a structured (Al,Ga)As microcavity

NASA Astrophysics Data System (ADS)

Kuznetsov, Alexander S.; Helgers, Paul L. J.; Biermann, Klaus; Santos, Paulo V.

2018-05-01

The realization of quantum functionalities with polaritons in an all-semiconductor platform requires the control of the energy and spatial overlap of the wave functions of single polaritons trapped in potentials with precisely controlled shape and size. In this study we reach the confinement of microcavity polaritons in traps with an effective potential width down to 1 µm, produced by patterning the active region of the (Al,Ga)As microcavity between two molecular beam epitaxy growth runs. We correlate spectroscopic and structural data to show that the smooth surface relief of the patterned traps translates into a graded confinement potential characterized by lateral interfaces with a finite lateral width. We show that the structuring method is suitable for the fabrication of arrays of proximal traps, supporting hybridization between adjacent lattice sites.

Functional design criteria for interim stabilization safety class 1 trip circuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, R.E., Westinghouse Hanford

1996-06-10

This Functional Design Criteria document outlines the basic requirements for the Safety Class 1 Trip Circuit. The objective of the Safety Class 1 Trip Circuit is to isolate the power circuitry to the Class 1 Division 2, Group B or lesser grade electrically fed loads located in the pump pit. The electrically fed load circuits need to have power isolated to them upon receipt of the following conditions, loss of flammable gases being released (above a predetermined threshold), and seismic(greater than 0.12g acceleration) activity. The two circuits requiring power isolation are the pump and heat trace power circuits. The Safetymore » Class 1 Trip Circuit will be used to support salt well pumping in SST`s containing potentially flammable gas-bearing / gas-producing radioactive waste.« less

Early postoperative repair status after rotator cuff repair cannot be accurately classified using questionnaires of patient function and isokinetic strength evaluation.

PubMed

Colliver, Jessica; Wang, Allan; Joss, Brendan; Ebert, Jay; Koh, Eamon; Breidahl, William; Ackland, Timothy

2016-04-01

This study investigated if patients with an intact tendon repair or partial-thickness retear early after rotator cuff repair display differences in clinical evaluations and whether early tendon healing can be predicted using these assessments. We prospectively evaluated 60 patients at 16 weeks after arthroscopic supraspinatus repair. Evaluation included the Oxford Shoulder Score, 11-item version of the Disabilities of the Arm, Shoulder and Hand, visual analog scale for pain, 12-item Short Form Health Survey, isokinetic strength, and magnetic resonance imaging (MRI). Independent t tests investigated clinical differences in patients based on the Sugaya MRI rotator cuff classification system (grades 1, 2, or 3). Discriminant analysis determined whether intact repairs (Sugaya grade 1) and partial-thickness retears (Sugaya grades 2 and 3) could be predicted. No differences (P < .05) existed in the clinical or strength measures. Although discriminant analysis revealed the 11-item version of the Disabilities of the Arm, Shoulder and Hand produced a 97% true-positive rate for predicting partial thickness retears, it also produced a 90% false-positive rate whereby it incorrectly predicted a retear in 90% of patients whose repair was intact. The ability to discriminate between groups was enhanced with up to 5 variables entered; however, only 87% of the partial-retear group and 36% of the intact-repair group were correctly classified. No differences in clinical scores existed between patients stratified by the Sugaya MRI classification system at 16 weeks. An intact repair or partial-thickness retear could not be accurately predicted. Our results suggest that correct classification of healing in the early postoperative stages should involve imaging. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Thermoelectric energy converter for generation of electricity from low-grade heat

DOEpatents

Jayadev, T.S.; Benson, D.K.

1980-05-27

A thermoelectric energy conversion device which includes a plurality of thermoelectric elements is described. A hot liquid is supplied to one side of each element and a cold liquid is supplied to the other side of each element. The thermoelectric generator may be utilized to produce power from low-grade heat sources such as ocean thermal gradients, solar ponds, and low-grade geothermal resources. (WHK)

A Comparison of Brain Wave Patterns of High and Low Grade Point Average Students During Rest, Problem Solving, and Stress Situations.

ERIC Educational Resources Information Center

Montor, Karel

The purpose of this study was to compare brain wave patterns produced by high and low grade point average students, while they were resting, solving problems, and subjected to stress situations. The study involved senior midshipmen at the United States Naval Academy. The high group was comprised of those whose cumulative grade point average was…

Semiconductor-metal graded-index composite thin films for infrared applications

NASA Technical Reports Server (NTRS)

Lamb, James L.; Nagendra, C. L.

1994-01-01

Theoretical/experimental studies have been carried out on germanium:silver (Ge:Ag) graded-index composite thin films which demonstrate that graded coatings, consisting of varied concentrations of Ag with respect to the Ge film thickness, exhibit different optical properties ranging from selective infrared (IR) reflectance to broadband IR absorptance. The graded coatings have been produced by dc magnetron cosputtering of Ge and Ag and the spectral properties are found to be stable against temperature. The coatings have been applied to an infrared tunnel sensor (micro-Golay cell) to improve the device performance.

Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material

NASA Astrophysics Data System (ADS)

Hasan, M.; Stokes, J.; Looney, L.; Hashmi, M. S. J.

2009-02-01

There is a significant interest in lightweight materials (like aluminum, magnesium, titanium, and so on) containing a wear resistance coating, in such industries as the automotive industry, to replace heavy components with lighter parts in order to decrease vehicle weight and increase fuel efficiency. Functionally graded coatings, in which the composition, microstructure, and/or properties vary gradually from the bond coat to the top coat, may be applied to lightweight materials, not only to decrease weight, but also to enhance components mechanical properties by ensuring gradual microstructural (changes) together with lower residual stress. In the current work, aluminum/tool-steel functionally graded coatings were deposited onto lightweight aluminum substrates. The graded coatings were then characterized in terms of residual stress and hardness. Results show that residual stress increased with an increase in deposition thickness and a decrease in number of layers. However, the hardness also increased with an increase in deposition thickness and decrease in number of layers. Therefore, an engineer must compromise between the hardness and stress values while designing a functionally graded coating-substrate system.

Thermo-Electro-Mechanical Analysis of a Curved Functionally Graded Piezoelectric Actuator with Sandwich Structure

PubMed Central

Yan, Zhi; Zaman, Mostafa; Jiang, Liying

2011-01-01

In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment. PMID:28824130

Micromechanics and Structural Response of Functionally Graded, Particulate-Matrix, Fiber-Reinforced Composites

PubMed Central

Genin, Guy M.; Birman, Victor

2009-01-01

Reinforcement of fibrous composites by stiff particles embedded in the matrix offers the potential for simple, economical functional grading, enhanced response to mechanical loads, and improved functioning at high temperatures. Here, we consider laminated plates made of such a material, with spherical reinforcement tailored by layer. The moduli for this material lie within relatively narrow bounds. Two separate moduli estimates are considered: a “two-step” approach in which fibers are embedded in a homogenized particulate matrix, and the Kanaun-Jeulin (2001) approach, which we re-derive in a simple way using the Benveniste (1988) method. Optimal tailoring of a plate is explored, and functional grading is shown to improve the performance of the structures considered. In the example of a square, simply supported, cross-ply laminated panel subjected to uniform transverse pressure, a modest functional grading offers significant improvement in performance. A second example suggests superior blast resistance of the panel achieved at the expense of only a small increase in weight. PMID:23874001

Development of processes for the production of solar grade silicon from halides and alkali metals, phase 1 and phase 2

NASA Technical Reports Server (NTRS)

Dickson, C. R.; Gould, R. K.; Felder, W.

1981-01-01

High temperature reactions of silicon halides with alkali metals for the production of solar grade silicon are described. Product separation and collection processes were evaluated, measure heat release parameters for scaling purposes and effects of reactants and/or products on materials of reactor construction were determined, and preliminary engineering and economic analysis of a scaled up process were made. The feasibility of the basic process to make and collect silicon was demonstrated. The jet impaction/separation process was demonstrated to be a purification process. The rate at which gas phase species from silicon particle precursors, the time required for silane decomposition to produce particles, and the competing rate of growth of silicon seed particles injected into a decomposing silane environment were determined. The extent of silane decomposition as a function of residence time, temperature, and pressure was measured by infrared absorption spectroscopy. A simplistic model is presented to explain the growth of silicon in a decomposing silane enviroment.

Efficient production of D-tagatose using a food-grade surface display system.

PubMed

Liu, Yi; Li, Sha; Xu, Hong; Wu, Lingtian; Xu, Zheng; Liu, Jing; Feng, Xiaohai

2014-07-16

D-tagatose, a functional sweetener, is commonly transformed from D-galactose by L-arabinose isomerase (L-AI). In this study, a novel type of biocatalyst, L-AI from Lactobacillus fermentum CGMCC2921 displayed on the spore surface of Bacillus subtilis 168, was developed for producing D-tagatose. The anchored L-AI, exhibiting the relatively high bioactivity, suggested that the surface display system using CotX as the anchoring protein was successfully constructed. The stability of the anchored L-AI was significantly improved. Specifically, the consolidation of thermal stability representing 87% of relative activity was retained even at 80 °C for 30 min, which remarkably favored the production of D-tagatose. Under the optimal conditions, the robust spores can convert 75% D-galactose (100 g/L) into D-tagatose after 24 h, and the conversion rate remained at 56% at the third cycle. Therefore, this biocatalysis system, which could express the target enzyme on the food-grade vector, was an alternative method for the value-added production of D-tagatose.

Caffeine-catalyzed gels.

PubMed

DiCiccio, Angela M; Lee, Young-Ah Lucy; Glettig, Dean L; Walton, Elizabeth S E; de la Serna, Eva L; Montgomery, Veronica A; Grant, Tyler M; Langer, Robert; Traverso, Giovanni

2018-07-01

Covalently cross-linked gels are utilized in a broad range of biomedical applications though their synthesis often compromises easy implementation. Cross-linking reactions commonly utilize catalysts or conditions that can damage biologics and sensitive compounds, producing materials that require extensive post processing to achieve acceptable biocompatibility. As an alternative, we report a batch synthesis platform to produce covalently cross-linked materials appropriate for direct biomedical application enabled by green chemistry and commonly available food grade ingredients. Using caffeine, a mild base, to catalyze anhydrous carboxylate ring-opening of diglycidyl-ether functionalized monomers with citric acid as a tri-functional crosslinking agent we introduce a novel poly(ester-ether) gel synthesis platform. We demonstrate that biocompatible Caffeine Catalyzed Gels (CCGs) exhibit dynamic physical, chemical, and mechanical properties, which can be tailored in shape, surface texture, solvent response, cargo release, shear and tensile strength, among other potential attributes. The demonstrated versatility, low cost and facile synthesis of these CCGs renders them appropriate for a broad range of customized engineering applications including drug delivery constructs, tissue engineering scaffolds, and medical devices. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Status of Initial Assessment of Physical and Mechanical Properties of Graphite Grades for NGNP Appkications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strizak, Joe P; Burchell, Timothy D; Windes, Will

2011-12-01

Current candidate graphite grades for the core structures of NGNP include grades NBG-17, NBG-18, PCEA and IG-430. Both NBG-17 and NBG-18 are manufactured using pitch coke, and are vibrationally molded. These medium grain products are produced by SGL Carbon SAS (France). Tayo Tanso (Japan) produces IG-430 which is a petroleum coke, isostatically molded, nuclear grade graphite. And PCEA is a medium grain, extruded graphite produced by UCAR Carbon Co. (USA) from petroleum coke. An experimental program has been initiated to develop physical and mechanical properties data for these current candidate graphites. The results will be judged against the requirements formore » nuclear grade graphites set forth in ASTM standard D 7219-05 "Standard Specification for Isotropic and Near-isotropic Nuclear Graphites". Physical properties data including thermal conductivity and coefficient of thermal expansion, and mechanical properties data including tensile, compressive and flexural strengths will be obtained using the established test methods covered in D-7219 and ASTM C 781-02 "Standard Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors". Various factors known to effect the properties of graphites will be investigated. These include specimen size, spatial location within a graphite billet, specimen orientation (ag and wg) within a billet, and billet-to-billet variations. The current status of the materials characterization program is reported herein. To date billets of the four graphite grades have been procured, and detailed cut up plans for obtaining the various specimens have been prepared. Particular attention has been given to the traceability of each specimen to its spatial location and orientation within a billet.« less

Production of extended release mini-tablets using directly compressible grades of HPMC.

PubMed

Mohamed, Faiezah A A; Roberts, Matthew; Seton, Linda; Ford, James L; Levina, Marina; Rajabi-Siahboomi, Ali R

2013-11-01

Hypromellose (HPMC) has been previously used to control drug release from mini-tablets. However, owing to poor flow, production of mini-tablets containing high HPMC levels is challenging. Directly compressible (DC) HPMC grades have been developed by Dow Chemical Company. To compare the properties of HPMC DC (METHOCEL™ K4M and K100M) with regular (REG) HPMC grades. Particle size distribution and flowability of HPMC REG and DC were evaluated. 3 mm mini-tablets, containing hydrocortisone or theophylline as model drugs and 40% w/w HPMC DC or REG were produced. Mini-tablets containing HPMC DC grades were manufactured using a rotary press simulator at forces between 2-4 kN and speeds of 5, 10, 15 or 20 rpm. Mini-tablets containing HPMC REG were produced manually. The improved flowability of HPMC DC grades, which have a narrower particle size distribution and larger particle sizes, meant that simulated large scale production of mini-tablets with good weight uniformity (CV 1.79-4.65%) was feasible. It was not possible to automatically manufacture mini-tablets containing HPMC REG due to the poor flowability of the formulations. Drug release from mini-tablets comprising HPMC DC and REG were comparable. Mini-tablets containing HPMC DC illustrated a higher tensile strength compared to mini-tablets made with HPMC REG. Mini-tablets produced with HPMC DC at different compression speeds had similar drug release profiles. Production of extended release mini-tablets was successfully achieved when HPMC DC was used. Drug release rate was not influenced by the different HPMC DC grades (K4M or K100M) or production speed.

Ccl5 establishes an autocrine high-grade glioma growth regulatory circuit critical for mesenchymal glioblastoma survival

PubMed Central

Pan, Yuan; Smithson, Laura J.; Ma, Yu; Hambardzumyan, Dolores; Gutmann, David H.

2017-01-01

Glioblastoma (GBM) is the most common malignant brain tumor in adults, with a median survival of 15 months. These poor clinical outcomes have prompted the development of drugs that block neoplastic cancer cell growth; however, non-neoplastic cell-derived signals (chemokines and cytokines) in the tumor microenvironment may also represent viable treatment targets. One such chemokine, Ccl5, produced by low-grade tumor-associated microglia, is responsible for maintaining neurofibromatosis type 1 (NF1) mouse optic glioma growth in vivo. Since malignant gliomas may achieve partial independence from growth regulatory factors produced by non-neoplastic cells in the tumor microenvironment by producing the same cytokines secreted by the stromal cells in their low-grade counterparts, we tested the hypothesis that CCL5/CCL5-receptor signaling in glioblastoma creates an autocrine circuit important for high-grade glioma growth. Herein, we demonstrate that increased CCL5 expression was restricted to both human and mouse mesenchymal GBM (M-GBM), a molecular subtype characterized by NF1 loss. We further show that the NF1 protein, neurofibromin, negatively regulates Ccl5 expression through suppression of AKT/mTOR signaling. Consistent with its role as a glioblastoma growth regulator, Ccl5 knockdown in M-GBM cells reduces M-GBM cell survival in vitro, and increases mouse glioblastoma survival in vivo. Finally, we demonstrate that Ccl5 operates through an unconventional CCL5 receptor, CD44, to inhibit M-GBM apoptosis. Collectively, these findings reveal an NF1-dependent CCL5-mediated pathway that regulates M-GBM cell survival, and support the concept that paracrine factors important for low-grade glioma growth can be usurped by high-grade tumors to create autocrine regulatory circuits that maintain malignant glioma survival. PMID:28380429

Delamination Analysis of a Multilayered Two-Dimensional Functionally Graded Cantilever Beam

NASA Astrophysics Data System (ADS)

Rizov, V.

2017-11-01

Delamination fracture behaviour of a multilayered two-dimensional functionally graded cantilever beam is analyzed in terms of the strain energy release rate. The beam is made of an arbitrary number of layers. Perfect adhesion is assumed between layers. Each layer has individual thickness and material properties. Besides, the material is two-dimensional functionally graded in the cross-section of each layer. There is a delamination crack located arbitrary between layers. The beam is loaded by a bending moment applied at the free end of the lower crack arm. The upper crack arm is free of stresses. The solution to strain energy release rate derived is applied to investigate the influence of the crack location and the material gradient on the delamination fracture. The results obtained can be used to optimize the multilayered two-dimensional functionally graded beam structure with respect to the delamination fracture behaviour.

Graded levels of FGF protein span the midbrain and can instruct graded induction and repression of neural mapping labels

PubMed Central

Chen, Yao; Mohammadi, Moosa; Flanagan, John G.

2009-01-01

Summary Graded guidance labels are widely used in neural map formation, but it is not well understood which potential strategy leads to their graded expression. In midbrain tectal map development, FGFs can induce an entire midbrain, but their protein distribution is unclear, nor is it known whether they may act instructively to produce graded gene expression. Using a receptor-alkaline phosphatase fusion probe, we find a long-range posterior>anterior FGF protein gradient spanning the midbrain. Heparan sulfate proteoglycan (HSPG) is required for this gradient. To test whether graded FGF concentrations can instruct graded gene expression, a quantitative tectal explant assay was developed. Engrailed-2 and ephrin-As, normally in posterior>anterior tectal gradients, showed graded upregulation. Moreover, EphAs, normally in anterior>posterior countergradients, showed coordinately graded downregulation. These results provide a mechanism to establish graded mapping labels, and more generally provide a developmental strategy to coordinately induce a structure and pattern its cell properties in gradients. PMID:19555646

Understanding Linear Functions and Their Representations

ERIC Educational Resources Information Center

Wells, Pamela J.

2015-01-01

Linear functions are an important part of the middle school mathematics curriculum. Students in the middle grades gain fluency by working with linear functions in a variety of representations (NCTM 2001). Presented in this article is an activity that was used with five eighth-grade classes at three different schools. The activity contains 15 cards…

The association between sleep disordered breathing, academic grades, and cognitive and behavioral functioning among overweight subjects during middle to late childhood.

PubMed

Beebe, Dean W; Ris, M Douglas; Kramer, Megan E; Long, Elizabeth; Amin, Raouf

2010-11-01

(1) to determine the associations of sleep disordered breathing (SDB) with behavioral functioning, cognitive test scores, and school grades during middle- to late-childhood, an under-researched developmental period in the SDB literature, and (2) to clarify whether associations between SDB and school grades are mediated by deficits in cognitive or behavioral functioning. cross-sectional correlative study. Office/hospital, plus reported functioning at home and at school. 163 overweight subjects aged 10-16.9 years were divided into 4 groups based upon their obstructive apnea+hypopnea index (AHI) during overnight polysomnography and parent report of snoring: Moderate-Severe OSA (AHI > 5, n = 42), Mild OSA (AHI = 1-5, n = 58), Snorers (AHI < 1 + snoring, n = 26), and No SDB (AHI < 1 and nonsnoring, n = 37). inpatient overnight polysomnography, parent- and self-report of school grades and sleep, parent- and teacher-report of daytime behaviors, and office-based neuropsychological testing. The 4 groups significantly differed in academic grades and parent- and teacher-reported behaviors, particularly inattention and learning problems. These findings remained significant after adjusting for subject sex, race, socioeconomic status, and school night sleep duration. Associations with SDB were confined to reports of behavioral difficulties in real-world situations, and did not extend to office-based neuropsychological tests. Findings from secondary analyses were consistent with, but could not definitively confirm, a causal model in which SDB affects school grades via its impact on behavioral functioning. SDB during middle- to late-childhood is related to important aspects of behavioral functioning, especially inattention and learning difficulties, that may result in significant functional impairment at school.

Association of Leukoaraiosis With Convalescent Rehabilitation Outcome in Patients With Ischemic Stroke.

PubMed

Senda, Joe; Ito, Keiichi; Kotake, Tomomitsu; Kanamori, Masahiko; Kishimoto, Hideo; Kadono, Izumi; Suzuki, Yoshiro; Katsuno, Masahisa; Nishida, Yoshihiro; Ishiguro, Naoki; Sobue, Gen

2016-01-01

We investigated the factors influencing inpatient convalescent rehabilitation outcomes in patients with ischemic stroke, particularly severity of leukoaraiosis on magnetic resonance imaging. Participants included 520 patients with ischemic stroke (317 men and 203 women; mean age, 72.8±8.4 years) who were transferred from acute care hospitals for inpatient convalescent rehabilitation. Ischemic stroke subtypes included lacunar infarction (n=41), atherothrombosis (n=223), artery-to-artery embolism (n=67), cardiogenic embolism (n=97), undetermined embolism (n=76), and uncategorized ischemic stroke (n=16). Leukoaraiosis was graded according to periventricular hyperintensity (PVH) and deep white matter hyperintensity on magnetic resonance imaging. Functional Independence Measure scores were assessed on admission and at discharge. Multiple regression analysis revealed that rehabilitation outcomes, measured as total Functional Independence Measure scores, were significantly associated with leukoaraiosis estimated by PVH grade. This association was observed after adjustment for factors such as severity, age, and poststroke history. In all patients, PVH grades were associated with Functional Independence Measure motor scores (P<0.001), whereas in patients with artery-to-artery embolism or cardiogenic embolism and deep white matter hyperintensity grades were associated with Functional Independence Measure cognitive scores (P<0.05). Our study revealed that the degree of leukoaraiosis was associated with inpatient convalescent rehabilitation outcome in patients with ischemic stroke. Furthermore, the PVH grade was associated with motor function outcome, whereas the deep white matter hyperintensity grade correlated with cognitive function outcome, likely because the progression patterns and anatomic backgrounds of PVH and deep white matter hyperintensity differ according to ischemic stroke subtype. © 2015 American Heart Association, Inc.

Correlation of resting and exercising endoscopic findings for horses with dynamic laryngeal collapse and palatal dysfunction.

PubMed

Barakzai, S Z; Dixon, P M

2011-01-01

To correlate resting and exercising endoscopic grades of laryngeal function in horses undergoing high-speed treadmill endoscopy (HSTE) using the Havemeyer grading system. To correlate dorsal displacement of the soft palate (DDSP) seen at rest with palatal function during exercise. Records of horses that underwent HSTE examination (1999-2009) were reviewed. Resting laryngeal function score and other abnormalities noted on resting endoscopy were recorded as were results of HSTE. Results of resting and exercising endoscopic findings were correlated. 281 horses underwent HSTE. There was significant correlation between grade of laryngeal function at rest (grades 1-4) and exercise (ρ=0.53, P<0.001) and between resting subgrades 3.1, 3.2 and 3.3 and exercising grades of laryngeal function (ρ=0.43, P=0.0017). DDSP was observed at rest significantly more often in horses that developed DDSP during HSTE than those without DDSP during HSTE (RR=4.1, P<0.001). The sensitivity and specificity of DDSP seen during resting endoscopy as a test for DDSP occurring during exercise were 25.5 and 95.1% respectively (positive predictive value 0.57, negative predictive value 0.83). The results of the current study support the use of the Havemeyer system for grading laryngeal function in the resting horse, and corroborate findings of previous studies correlating resting and exercising palatal abnormalities. Studies that use the presence of spontaneous DDSP during resting endoscopic examination as an inclusion criterion for investigating efficacy of treatments for DDSP are likely to have a low proportion of horses with false positive diagnoses. © 2010 EVJ Ltd.

Development of maintenance practices for Oregon F-Mix : Interim report

DOT National Transportation Integrated Search

1999-08-01

The Oregon Department of Transportation (ODOT) produces an open-graded asphalt pavement(F-mix) unlike most open-graded pavements used in the United States. Its 25 mm maximum aggregate size and typical lift thickness of 50 mm is more like the porous a...

Evaluation of long-term pavement performance and noise characteristics of open-graded friction courses : project 3.

DOT National Transportation Integrated Search

2010-06-01

This experimental project is being conducted as a part of WSDOTs effort to produce pavements that reduce the noise : generated at the tire/pavement interface. Experimental sections of open-graded friction courses were built using asphalt rubber : ...

Evaluation of evidence-based literature and formulation of recommendations for the clinical preventive guidelines for immigrants and refugees in Canada

PubMed Central

Tugwell, Peter; Pottie, Kevin; Welch, Vivian; Ueffing, Erin; Chambers, Andrea; Feightner, John

2011-01-01

Background: This article describes the evidence review and guideline development method developed for the Clinical Preventive Guidelines for Immigrants and Refugees in Canada by the Canadian Collaboration for Immigrant and Refugee Health Guideline Committee. Methods: The Appraisal of Guidelines for Research and Evaluation (AGREE) best-practice framework was combined with the recently developed Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach to produce evidence-based clinical guidelines for immigrants and refugees in Canada. Results: A systematic approach was designed to produce the evidence reviews and apply the GRADE approach, including building on evidence from previous systematic reviews, searching for and comparing evidence between general and specific immigrant populations, and applying the GRADE criteria for making recommendations. This method was used for priority health conditions that had been selected by practitioners caring for immigrants and refugees in Canada. Interpretation: This article outlines the 14-step method that was defined to standardize the guideline development process for each priority health condition. PMID:20573711

Performance evaluation of image-intensifier-TV fluoroscopy systems

NASA Astrophysics Data System (ADS)

van der Putten, Wilhelm J.; Bouley, Shawn

1995-05-01

Through use of a computer model and an aluminum low contrast phantom developed in-house, a method has been developed which is able to grade the imaging performance of fluoroscopy systems through use of a variable, K. This parameter was derived from Rose's model of image perception and is here used as a figure of merit to grade fluoroscopy systems. From Rose's model for an ideal system, a typical value of K for the perception of low contrast details should be between 3 and 7, assuming threshold vision by human observers. Thus, various fluoroscopy systems are graded with different values of K, with a lower value of K indicating better imaging performance of the system. A series of fluoroscopy systems have been graded where the best system produces a value in the low teens, while the poorest systems produce a value in the low twenties. Correlation with conventional image quality measurements is good and the method has the potential for automated assessment of image quality.

Ottawa Panel evidence-based clinical practice guidelines for the management of osteoarthritis in adults who are obese or overweight.

PubMed

Brosseau, Lucie; Wells, George A; Tugwell, Peter; Egan, Mary; Dubouloz, Claire-Jehanne; Casimiro, Lynn; Bugnariu, Nicoleta; Welch, Vivian A; De Angelis, Gino; Francoeur, Lilliane; Milne, Sarah; Loew, Laurianne; McEwan, Jessica; Messier, Steven P; Doucet, Eric; Kenny, Glen P; Prud'homme, Denis; Lineker, Sydney; Bell, Mary; Poitras, Stéphane; Li, Jing Xian; Finestone, Hillel M; Laferrière, Lucie; Haines-Wangda, Angela; Russell-Doreleyers, Marion; Lambert, Kim; Marshall, Alison D; Cartizzone, Margot; Teav, Adam

2011-06-01

The objective of this review was to construct an updated evidence-based clinical practice guideline on the use of physical activity and diet for the management of osteoarthritis (OA) in adults (>18 years of age) who are obese or overweight (body mass index ≥25 kg/m(2)). Articles were extracted from the following databases: MEDLINE, EMBASE (Current Contents), SPORTDiscus, SUM, Scopus, CINAHL, AMED, BIOMED, PubMed, ERIC, the Cochrane Controlled Trials, and PEDro. The Ottawa Panel and research assistance team strictly applied the inclusion and exclusion criteria from previous Ottawa Panel publications. An a priori literature search was conducted for articles related to obesity and OA of the lower extremities that were published from January 1, 1966, to November 30, 2010. Inclusion criteria and the methods to grade the recommendations were created by the Ottawa Panel. were graded based on the strength of evidence (A, B, C, C+, D, D+, or D-) as well as experimental design (I for randomized controlled trials and II for nonrandomized studies). In agreement with previous Ottawa Panel methods, Cochrane Collaboration methods were utilized for statistical analysis. Clinical significance was established by an improvement of ≥15% in the experimental group compared with the control group. There were a total of 79 recommendations from 9 articles. From these recommendations, there were 36 positive recommendations: 21 grade A and 15 grade C+. There were no grade B recommendations, and all recommendations were of clinical benefit. Further research is needed, as more than half of the trials were of low methodological quality. This review suggests that physical activity and diet programs are beneficial, specifically for pain relief (9 grade A recommendations) and improved functional status (6 grade A and 7 grade C+ recommendations), for adults with OA who are obese or overweight. The Ottawa Panel was able to demonstrate that when comparing physical activity alone, diet alone, physical activity combined with diet, and control groups, the intervention including physical activity and diet produced the most beneficial results.

Production and functional evaluation of a protein concentrate from giant squid (Dosidicus gigas) by acid dissolution and isoelectric precipitation.

PubMed

Cortés-Ruiz, Juan A; Pacheco-Aguilar, Ramón; Elena Lugo-Sánchez, M; Gisela Carvallo-Ruiz, M; García-Sánchez, Guillermina

2008-09-15

A protein concentrate from giant squid (Dosidicus gigas) was produced under acidic conditions and its functional-technological capability evaluated in terms of its gel-forming ability, water holding capacity and colour attributes. Technological functionality of the concentrate was compared with that of squid muscle and a neutral concentrate. Protein-protein aggregates insoluble at high ionic strength (I=0.5M), were detected in the acidic concentrate as result of processing with no preclusion of its gel-forming ability during the sol-to-gel thermal transition. Even though washing under acidic condition promoted autolysis of the myosin heavy chain, the acidic concentrate displayed an outstanding ability to gel giving samples with a gel strength of 455 and 1160gcm at 75% and 90% compression respectively, and an AA folding test grade indicative of high gel strength, elasticity, and cohesiveness. The process proved to be a good alternative for obtaining a functional protein concentrate from giant squid muscle. Copyright © 2008. Published by Elsevier Ltd.

Does Grading Affect Educational Attainment? A Longitudinal Study

ERIC Educational Resources Information Center

Klapp, Alli

2015-01-01

The purpose of the study was to investigate how grading in primary school affected students' achievement measured by grades in 7th, 8th and 9th Grade and educational attainment in upper secondary school (12th Grade), and how the effect varied as a function of students' cognitive ability, gender and socio-economic status. The data derived from the…

[The clinical effect of anti-rotation reduction internal fixator on the treatment of fresh thoracolumbar spine fracture].

PubMed

Pan, Xianming; Quan, Yi; Tan, Yingjun; Zhang, Bo; Wang, Yuanshan; Huang, Tong; Ma, Zehui; Liao, Dongfa; Li, Ting; Liu, Jinbiao

2005-03-15

To evaluate the effect of self-designed anti-rotation reduction internal fixator (ARRIF) on treating different spine segment fracture. From August 1999 to March 2003, 76 patients(48 males and 28 females, aged from 22 to 59 with an average of 34.1) with thoracolumbar fracture were operatively treated by ARRIF. The follow-up period ranged from 6 to 21 months (15 months in average). Classification according to injury segment: flexion compression fracture 27 cases, burst fracture 42 cases, flexion distraction injury 3 cases, flexion revolving type fracture dislocation 2 cases, shear force type dislocation 2 cases. Classification according Frankel's grade: A grade 16 cases, B grade 15 cases, C grade 27 cases, D grade 10 cases, E grade 8 cases. Operation duration, volume of bleeding, incidence post-operation complication and effect of reduction-fixation were observed. The operation duration of ARRIF was 1.2 h in average, and there was about 200 ml volume of bleeding during operation. The nerve function showed one Frankel's grade improvement after operation were as follows: A grade 8 cases (50%), B grade 11 cases (73.3%), C grade 20 cases (74.1%), D grade 3 cases (30%); 2 Frankel's E cases have no nerve function changes. The nerve function damage have no aggravation in all the patients, the postoperation Cobb's angle was averagely corrected 22 degrees. The horizontal displacement of dislocation vertebrae was averagely corrected 28% in sagittal plane, the statistical analysis had significant variance (P < 0.01). ARRIF had no complications of the breakage of screws and rods. ARRIF proves to be a valid internal fixator in reducing and fixing different thoracic lumbar segment spine fracture.

Parent-reported cognitive function is associated with leukoencephalopathy in children with brain tumors.

PubMed

Lai, Jin-Shei; Bregman, Corey; Zelko, Frank; Nowinski, Cindy; Cella, David; Beaumont, Jennifer J; Goldman, Stewart

2017-09-01

Cognitive dysfunction is a major concern for children with brain tumors. A valid, user-friendly screening tool could facilitate prompt referral for comprehensive neuropsychological assessments and therefore early intervention. Applications of the pediatric perceived cognitive function item bank (pedsPCF) such as computerized adaptive testing can potentially serve as such a tool given its brevity and user-friendly nature. This study aimed to evaluate whether pedsPCF was a valid indicator of cerebral compromise using the criterion of structural brain changes indicated by leukoencephalopathy grades. Data from 99 children (mean age = 12.6 years) with brain tumors and their parents were analyzed. Average time since diagnosis was 5.8 years; time since last treatment was 4.3 years. Leukoencephalopathy grade (range 0-4) was based on white matter damage and degree of deep white matter volume loss shown on MRI. Parents of patients completed the pedsPCF. Scores were based on the US general population-based T-score metric (mean = 50; SD = 10). Higher scores reflect better function. Leukoencephalopathy grade distributions were as follows: 36 grade 0, 27 grade 1, 22 grade 2, 13 grade 3, and 1 grade 4. The mean pedsPCF T-score was 48.3 (SD = 8.3; range 30.5-63.7). The pedsPCF scores significantly discriminated patients with different leukoencephalopathy grades, F = 4.14, p = 0.0084. Effect sizes ranged from 0.09 (grade 0 vs. 1) to 1.22 (grade 0 vs. 3/4). This study demonstrates that the pedsPCF is a valid indicator of leukoencephalopathy and provides support for its use as a screening tool for more comprehensive neurocognitive testing.

Collegiate Grading Practices and the Gender Pay Gap.

ERIC Educational Resources Information Center

Dowd, Alicia C.

2000-01-01

Presents a theoretical analysis showing that relatively low grading quantitative fields and high grading verbal fields create a disincentive for college women to invest in quantitative study. Extends research by R. Sabot and J. Wakeman-Linn. Models pressures on grading practices using higher education production functions. (Author/SLD)

Purification and deposition of silicon by an iodide disproportionation reaction

DOEpatents

Wang, Tihu; Ciszek, Theodore F.

2002-01-01

Method and apparatus for producing purified bulk silicon from highly impure metallurgical-grade silicon source material at atmospheric pressure. Method involves: (1) initially reacting iodine and metallurgical-grade silicon to create silicon tetraiodide and impurity iodide byproducts in a cold-wall reactor chamber; (2) isolating silicon tetraiodide from the impurity iodide byproducts and purifying it by distillation in a distillation chamber; and (3) transferring the purified silicon tetraiodide back to the cold-wall reactor chamber, reacting it with additional iodine and metallurgical-grade silicon to produce silicon diiodide and depositing the silicon diiodide onto a substrate within the cold-wall reactor chamber. The two chambers are at atmospheric pressure and the system is open to allow the introduction of additional source material and to remove and replace finished substrates.

Parental Autonomy Granting and School Functioning among Chinese Adolescents: The Moderating Role of Adolescents’ Cultural Values

PubMed Central

Wang, Cixin; Do, Kieu Anh; Bao, Leiping; Xia, Yan R.; Wu, Chaorong

2017-01-01

School adjustment and achievement are important indicators of adolescents’ well-being; however, few studies have examined the risk and protective factors predicting students’ school adjustment and achievement at the individual, familial, and cultural level. The present study examined the influences of individual and familial factors and cultural values on Chinese adolescents’ school functioning (e.g., school adjustment and grades). It also tested whether cultural values moderated the relationship between parenting and adolescents’ school functioning. Self-report data were collected from a stratified random sample of 2,864 adolescents (51.5% female, mean age = 15.52 years, grade 6th – 12th) from 55 classrooms, in 13 schools in Shanghai, China. Results showed that self-esteem (bse→adj = 0.05, SE = 0.01, p < 0.001; bse→grades = 0.08, SE = 0.02, p < 0.001), parent–adolescent conflict (bconflict→adj = -0.03, SE = 0.00, p < 0.001; bconflict→grades = -0.04, SE = 0.01, p < 0.001), and conformity to parental expectations (bconform→adj = -0.03, SE = 0.02, p < 0.05; bconform→grades = 0.10, SE = 0.04, p < 0.05) all had significant effects on both school adjustment and grades, respectively. More importantly, results showed that independent self-construal moderated the relationship between parental autonomy granting and adolescents’ grades (bindepxautom = 0.06, SE = 0.02, p < 0.01). The findings suggest that cultural values may influence adolescents’ appraisal of parental autonomy granting, which then impacts their school functioning. PMID:29326622

Anatomical grades of nerve sparing: a risk-stratified approach to neural-hammock sparing during robot-assisted radical prostatectomy (RARP).

PubMed

Tewari, Ashutosh K; Srivastava, Abhishek; Huang, Michael W; Robinson, Brian D; Shevchuk, Maria M; Durand, Matthieu; Sooriakumaran, Prasanna; Grover, Sonal; Yadav, Rajiv; Mishra, Nishant; Mohan, Sanjay; Brooks, Danielle C; Shaikh, Nusrat; Khanna, Abhinav; Leung, Robert

2011-09-01

• To report the potency and oncological outcomes of patients undergoing robot-assisted radical prostatectomy (RARP) using a risk-stratified approach based on layers of periprostatic fascial dissection. • We also describe the surgical technique of complete hammock preservation or nerve sparing grade 1. • This is a retrospective study of 2317 patients who had robotic prostatectomy by a single surgeon at a single institution between January 2005 and June 2010. • Included patients were those with ≥ 1 year of follow-up and who were potent preoperatively, defined as having a sexual health inventory for men (SHIM) questionnaire score of >21; thus, the final number of patients in the study cohort was 1263. • Patients were categorized pre-operatively by a risk-stratified approach into risk grades 1-4, where risk grade 1 patients received nerve-sparing grade 1 or complete hammock preservation and so on for risk grades 2-4, as long as intraoperative findings permitted the planned nerve sparing. • We considered return to sexual function post-operatively by two criteria: i) ability to have successful intercourse (score of ≥ 4 on question 2 of the SHIM) and ii) SHIM >21 or return to baseline sexual function. • There was a significant difference across different NS grades in terms of the percentages of patients who had intercourse and returned to baseline sexual function (P < 0.001), with those that underwent NS grade 1 having the highest rates (90.9% and 81.7%) as compared to NS grades 2 (81.4% and 74.3%), 3 (73.5% and 66.1%), and 4 (62% and 54.5%). • The overall positive surgical margin (PSM) rates for patients with NS grades 1, 2, 3, and 4 were 9.9%, 8.1%, 7.2%, and 8.7%, respectively (P = 0.636). • The extraprostatic extension rates were 11.6%, 14.3%, 29.3%, and 36.2%, respectively (P < 0.001). • Similarly, in patients younger than 60, intercourse and return to baseline sexual function rates were 94.9% and 84.3% for NS grade 1 as compared to 85.5% and 77.2% for NS grades 2, 76.9% and 69% for NS grades 3, and 64.8% and 57.7% for NS Grade 4 (P < 0.001). • The risk-stratified approach and anatomical technique of neural-hammock sparing described in the present manuscript was effective in improving potency outcomes of patients without compromising cancer control. • Patients with greater degrees of NS had higher rates of intercourse and return to baseline sexual function without an increase in PSM rates. © 2011 THE AUTHORS. BJU INTERNATIONAL © 2011 BJU INTERNATIONAL.

Clinical course of patients with ossification of the posterior longitudinal ligament: a minimum 10-year cohort study.

PubMed

Matsunaga, Shunji; Sakou, Takashi; Taketomi, Eiji; Komiya, Setsuro

2004-03-01

Ossification of the posterior longitudinal ligament (OPLL) may produce quadriplegia. The course of future neurological deterioration in patients with radiographic evidence of OPLL, however, is not known. The authors conducted a long-term follow-up cohort study of more than 10 years to clarify the clinical course of this disease progression. A total of 450 patients, including 304 managed conservatively and 146 treated by surgery, were enrolled in the study. All patients underwent neurological and radiographical follow-up examinations for a mean of 17.6 years. Myelopathy was graded using Nurick classification and the Japanese Orthopaedic Association scale. Fifty-five (17%) of 323 patients without myelopathy evident at the first examination developed myelopathy during the follow-up period. Risk factors associated with the evolution of myelopathy included greater than 60% OPLL-induced stenotic compromise of the cervical canal, and increased range of motion of the cervical spine. Using Kaplan-Meier analysis, the myelopathy-free rate in patients without first-visit myelopathy was 71% after 30 years. A significant difference in final functional outcome was not observed between nonsurgical and surgical cases in which preoperative Nurick grades were 1 or 2. In patients with Nurick Grade 3 or 4 myelopathy, however, only 12% who underwent surgery eventually became wheelchair bound or bedridden compared with 89% of those managed conservatively. Surgery proved ineffective in the management of patients with Grade 5 disease. Results of this long-term cohort study elucidated the clinical course of OPLL following conservative or surgical management. Surgery proved effective for the management of patients with Nurick Grades 3 and 4 myelopathy.

Acute traumatic central cord syndrome--experience using surgical decompression with open-door expansile cervical laminoplasty.

PubMed

Uribe, Juan; Green, Barth A; Vanni, Steven; Moza, Kapil; Guest, James D; Levi, Allan D

2005-06-01

Open-door expansile cervical laminoplasty (ODECL) is an effective surgical technique in the treatment of multilevel cervical spondylotic myelopathy. In the present study, we reviewed the safety and short-term neurological outcome after expansile cervical laminoplasty in the treatment of acute central cord syndrome. We retrospectively reviewed our database over a 3-year period (January 1997-January 2001) and identified 69 surgically treated cervical spinal cord injuries, including 29 cases of acute traumatic central cord syndrome (ATCCS). Fifteen of these patients underwent expansile cervical laminoplasty, whereas 14 did not because of radiographic evidence of sagittal instability. We collected data on the preoperative and the immediate postoperative and 3-month neurological examinations. Neurological function was assessed using the Asia Spinal Injury Association (ASIA) grading system. We also reviewed the occurrence of complications and short-term radiological stability after the index procedure. The median age was 56 years. All patients had hyperextension injuries with underlying cervical spondylosis and stenosis in the absence of overt fracture or instability. The average delay from injury to surgery was 3 days. The preoperative ASIA grade scale was grade C, 8 patients, and grade D, 7 patients. There were no cases of immediate postoperative deterioration or at 3 months follow-up. Neurological outcome: 71.4% (10/14) of patients improved 1 ASIA grade when examined 3 months post injury. Surgical intervention consisting of ODECL can be safely applied in the subset of patients with ATCCS without instability who have significant cervical spondylosis/stenosis. Open-door expansile cervical laminoplasty is a safe, low-morbidity, decompressive procedure, and in our patients did not produce neurological deterioration.

[Relationship between status of physical and mental function and quality of life among the elderly people admitted from long-term care insurance].

PubMed

Kim, Hyeong Seon; Bae, Nam Kyou; Kwon, In Sun; Cho, Young Chae

2010-07-01

This study was performed to determine the levels of quality of life (QOL) according to the grade of long-term care service for the elderly people who were admitted from long-term care insurance, and to reveal its association with the physical and mental functioning such as the Activity of Daily Living (ADL), the Instrumental Activity of Daily Living (IADL), the Center for Epidemiologic Studies Depression Scale (CES-D), and the Mini-Mental State Examination-Korean version (MMSE-K). The interviews were performed during the period from March 1 to May 31, 2009, for 958 elderly people in urban and rural areas. The questionnaire items included various indices such as the ADL, IADL, CES-D, and MMSE-K, as independent variables and the index of QOL, as the dependent ones. For statistical analysis, t-tests were used for the mean scores of QOL according to gender and the grade of long-term care services, and Spearman's correlation was used for each variable. The effects of physical and mental functioning for QOL were assessed by covariance structure analysis. The statistical significance was set at p<0.05. The mean scores of QOL among all the subjects was 55.4 ± 15.62 (Grade I: 49.7 ± 14.17, Grade II: 56.8 ± 14.62, Grade III: 59.4 ± 16.36), and it was lower according to the higher grade of long-term care insurance. In terms of the correlation matrix of the QOL and the physical and mental function factors, the QOL showed positive correlation with the ADL, IADL and MMSE-K, while it had negative correlation with depression. On the analysis of covariance, mental functioning (depression and the MMSE-K) had a greater influence on the level of QOL than the physical functioning (ADL and IADL). The level of the QOL in the elderly people who were admitted from long-term care insurance was lower according to higher the grade of long-term care insurance. Also, the mental functioning (depression and MMSE-K) was more influential on the level of the QOL than the physical functioning (ADL and IADL).

Physical Properties of Normal Grade Biodiesel and Winter Grade Biodiesel

PubMed Central

Sadrolhosseini, Amir Reza; Moksin, Mohd Maarof; Nang, Harrison Lau Lik; Norozi, Monir; Yunus, W. Mahmood Mat; Zakaria, Azmi

2011-01-01

In this study, optical and thermal properties of normal grade and winter grade palm oil biodiesel were investigated. Surface Plasmon Resonance and Photopyroelectric technique were used to evaluate the samples. The dispersion curve and thermal diffusivity were obtained. Consequently, the variation of refractive index, as a function of wavelength in normal grade biodiesel is faster than winter grade palm oil biodiesel, and the thermal diffusivity of winter grade biodiesel is higher than the thermal diffusivity of normal grade biodiesel. This is attributed to the higher palmitic acid C16:0 content in normal grade than in winter grade palm oil biodiesel. PMID:21731429

How the variance of some extraction variables may affect the quality of espresso coffees served in coffee shops.

PubMed

Severini, Carla; Derossi, Antonio; Fiore, Anna G; De Pilli, Teresa; Alessandrino, Ofelia; Del Mastro, Arcangela

2016-07-01

To improve the quality of espresso coffee, the variables under the control of the barista, such as grinding grade, coffee quantity and pressure applied to the coffee cake, as well as their variance, are of great importance. A nonlinear mixed effect modeling was used to obtain information on the changes in chemical attributes of espresso coffee (EC) as a function of the variability of extraction conditions. During extraction, the changes in volume were well described by a logistic model, whereas the chemical attributes were better fit by a first-order kinetic. The major source of information was contained in the grinding grade, which accounted for 87-96% of the variance of the experimental data. The variability of the grinding produced changes in caffeine content in the range of 80.03 mg and 130.36 mg when using a constant grinding grade of 6.5. The variability in volume and chemical attributes of EC is large. Grinding had the most important effect as the variability in particle size distribution observed for each grinding level had a profound effect on the quality of EC. Standardization of grinding would be of crucial importance for obtaining all espresso coffees with a high quality. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

The influence of target erosion grade in the optoelectronic properties of AZO coatings growth by magnetron sputtering

NASA Astrophysics Data System (ADS)

Zubizarreta, C.; G-Berasategui, E.; Ciarsolo, I.; Barriga, J.; Gaspar, D.; Martins, R.; Fortunato, E.

2016-09-01

Aluminum-doped zinc oxide (AZO) transparent conductor coating has emerged as promising substitute to tin-doped indium oxide (ITO) as electrode in optoelectronic applications such as photovoltaics or light emitting diodes (LEDs). Besides its high transmission in the visible spectral region and low resistivity, AZO presents a main advantage over other candidates such as graphene, carbon nanotubes or silver nanowires; it can be deposited using the technology industrially implemented to manufacture ITO layers, the magnetron sputtering (MS). This is a productive, reliable and green manufacturing technique. But to guarantee the robustness, reproducibility and reliability of the process there are still some issues to be addressed, such as the effect and control of the target state. In this paper a thorough study of the influence of the target erosion grade in developed coatings has been performed. AZO films have been deposited from a ceramic target by RF MS. Structure, optical transmittance and electrical properties of the produced coatings have been analyzed as function of the target erosion grade. No noticeable differences have been found neither in optoelectronic properties nor in the structure of the coatings, indicating that the RF MS is a stable and consistent process through the whole life of the target.

The use of functionally graded dental crowns to improve biocompatibility: a finite element analysis.

PubMed

Mahmoudi, Mojtaba; Saidi, Ali Reza; Hashemipour, Maryam Alsadat; Amini, Parviz

2018-02-01

In post-core crown restorations, the significant mismatch between stiffness of artificial crowns and dental tissues leads to stress concentration at the interfaces. The aim of the present study was to reduce the destructive stresses by using a class of inhomogeneous materials called functionally graded materials (FGMs). For the purpose of the study, a 3-dimentional computer model of a premolar tooth and its surrounding tissues were generated. A post-core crown restoration with various crown materials, homogenous and FGM materials, were simulated and analyzed by finite element method. Finite element and statistical analysis showed that, in case of oblique loading, a significant difference (p < 0.05) was found at the maximum von Mises stresses of the crown margin between FGM and homogeneous crowns. The maximum von Mises stresses of the crown margin generated by FGM crowns were lower than those generated by homogenous crowns (70.8 vs. 46.3 MPa) and alumina crown resulted in the highest von Mises stress at the crown margin (77.7 MPa). Crown materials of high modulus of elasticity produced high stresses at the cervical region. FGM crowns may reduce the stress concentration at the cervical margins and consequently reduce the possibility of fracture.

Microglia ablation alleviates myelin-associated catatonic signs in mice

PubMed Central

Janova, Hana; Arinrad, Sahab; Balmuth, Evan; Mitjans, Marina; Bittner, Robert A.; Pan, Hong; Goebbels, Sandra; Begemann, Martin; Gerwig, Ulrike C.; Langner, Sönke; Werner, Hauke B.; Davatzikos, Christos; Völzke, Henry; West, Brian L.; Reif, Andreas; Grabe, Hans Jörgen; Nave, Klaus-Armin

2017-01-01

The underlying cellular mechanisms of catatonia, an executive “psychomotor” syndrome that is observed across neuropsychiatric diseases, have remained obscure. In humans and mice, reduced expression of the structural myelin protein CNP is associated with catatonic signs in an age-dependent manner, pointing to the involvement of myelin-producing oligodendrocytes. Here, we showed that the underlying cause of catatonic signs is the low-grade inflammation of white matter tracts, which marks a final common pathway in Cnp-deficient and other mutant mice with minor myelin abnormalities. The inhibitor of CSF1 receptor kinase signaling PLX5622 depleted microglia and alleviated the catatonic symptoms of Cnp mutants. Thus, microglia and low-grade inflammation of myelinated tracts emerged as the trigger of a previously unexplained mental condition. We observed a very high (25%) prevalence of individuals with catatonic signs in a deeply phenotyped schizophrenia sample (n = 1095). Additionally, we found the loss-of-function allele of a myelin-specific gene (CNP rs2070106-AA) associated with catatonia in 2 independent schizophrenia cohorts and also associated with white matter hyperintensities in a general population sample. Since the catatonic syndrome is likely a surrogate marker for other executive function defects, we suggest that microglia-directed therapies may be considered in psychiatric disorders associated with myelin abnormalities. PMID:29252214

Predictors of Recoverability of Renal Function after Pyeloplasty in Adults with Ureteropelvic Junction Obstruction.

PubMed

Li, Xiao-Dong; Wu, Yu-Peng; Wei, Yong; Chen, Shao-Hao; Zheng, Qing-Shui; Cai, Hai; Xue, Xue-Yi; Xu, Ning

2018-01-01

This study aimed to identify factors predicting the recoverability of renal function after pyeloplasty in adult patients with ureteropelvic junction obstruction. We retrospectively reviewed 138 adults with unilateral renal obstruction-induced hydronephrosis and who underwent Anderson-Hynes dismembered pyeloplasty from January 2013 to January 2016. Hydronephrosis was classified preoperatively according to the Society for Fetal Urology (SFU) grading system. All patients underwent Doppler ultrasonography, excretory urography, computed tomography, and technetium-99m-diethylenetriamine pentaacetic acid radioisotope (99mTc DTPA) renography before and after surgery. Renal resistive index (RRI) and 99mTc DTPA renography were repeated at 1, 3, 6, and 12 months. Multivariate analysis identified age, renal pelvic type, SFU grade, preoperative RRI, decline of RRI, and renal parenchyma to hydronephrosis area ratio (PHAR) as independent predictors of renal function recoverability after pyeloplasty. However, preoperative RRI and RRI decline were not significantly associated with recoverability of renal function in patients aged >35 years. Lower preoperative RRI, greater decline in RRI, higher PHAR, lower SFU grade, and extrarenal pelvis were associated with greater improvements in postoperative renal function. Preoperative differential renal function cannot independently predict the recoverability of postoperative renal function in adult patients with unilateral renal obstruction-induced hydronephrosis. SFU grade, renal pelvic type, PHAR, preoperative RRI, and decline in RRI were significantly associated with the recoverability of renal function in adult patients aged <35 years, while only SFU grade, renal pelvic type, and PHAR were significantly associated with renal function recoverability in patients aged ≥35 years. Renal function recovery was better in patients younger than 35 years when compared with older patients. © 2018 S. Karger AG, Basel.

How readable are Australian paediatric oral health education materials?

PubMed

Arora, Amit; Lam, Andy S F; Karami, Zahra; Do, Loc Giang; Harris, Mark Fort

2014-09-02

The objective of this study was to analyse the readability of paediatric oral health education leaflets available in Australia. Forty paediatric oral health education materials were analysed for general readability according to the following parameters: Thoroughness; Textual framework; Terminology; and Readability (Flesch-Kincaid grade level (FKGL), Gunning Fog index (Fog) and Simplified Measure of Gobbledygook (SMOG)). Leaflets produced by the industry were among the hardest to read with an average readability at the 8th grade (8.4 ± 0.1). The readability of leaflets produced by the commercial sector was at the 7th grade (7.1 ± 1.7) and the government at the 6th grade (6.3 ± 1.9). The FKGL consistently yielded readabilities 2 grades below the Fog and SMOG indexes. In the content analyses, 14 essential paediatric oral health topics were noted and Early Childhood Caries (ECC) was identified as the most commonly used jargon term. Paediatric oral health education materials are readily available, yet their quality and readability vary widely and may be difficult to read for disadvantaged populations in Australia. A redesign of these leaflets while taking literacy into consideration is suggested.

Feasibility Studies for Production of Pellet Grade Concentrate from Sub Grade Iron Ore Using Multi Gravity Separator

NASA Astrophysics Data System (ADS)

Rao, Gottumukkala Venkateswara; Markandeya, R.; Kumar, Rajan

2018-04-01

An attempt has been made to utilise Sub Grade Iron Ore by producing pellet grade concentrate from Deposit 5, Bacheli Complex, Bailadila, Chhattisgarh, India. The `as received' Run of Mine (ROM) sample assayed 40.80% Fe, 40.90% SiO2. Mineralogical studies indicated that the main ore mineral is Hematite and lone gangue mineral is Quartz. Mineral liberation studies indicated that, the ore mineral Hematite and gangue mineral Quartz are getting liberated below 100 microns. The stage crushed and ground sample was subjected to concentration by using a Multi Gravity Separator (MGS). Rougher Multi Gravity Separation (MGS) experimental results were optimised to recover highest possible iron values. A concentrate of 55.80% Fe with a yield of 61.73% by weight with a recovery of 84.42% Iron values was obtained in rougher MGS concentrate. Further experiments were carried out with rougher MGS concentrate to produce a concentrate suitable for commercial grade pellet concentrate. It was proved that a concentrate assaying 66.67% Fe, 3.12% SiO2 with an yield of 45.08% by weight and with a recovery of 73.67% iron values in the concentrate.

Does the Value of Dynamic Assessment in Predicting End-of-First-Grade Mathematics Performance Differ as a Function of English Language Proficiency?

ERIC Educational Resources Information Center

Seethaler, Pamela M.; Fuchs, Lynn S.; Fuchs, Douglas; Compton, Donald L.

2016-01-01

The purpose of this study was to assess the added value of dynamic assessment (DA) beyond more conventional static measures for predicting individual differences in year-end 1st-grade calculation (CA) and word-problem (WP) performance, as a function of limited English proficiency (LEP) status. At the start of 1st grade, students (129 LEP; 163…

Cryopreservation does not alter main characteristics of Good Manufacturing Process-grade human multipotent mesenchymal stromal cells including immunomodulating potential and lack of malignant transformation.

PubMed

Luetzkendorf, Jana; Nerger, Katrin; Hering, Julian; Moegel, Angelika; Hoffmann, Katrin; Hoefers, Christiane; Mueller-Tidow, Carsten; Mueller, Lutz P

2015-02-01

The immunomodulating capacity of multipotent mesenchymal stromal cells (MSCs) qualifies them as a therapeutic tool in several diseases. However, repeated transplantation with products of reproducible characteristics may be required. This could be achieved with cryopreserved aliquots of Good Manufacturing Practice (GMP)-grade MSCs. However, the impact of cryopreservation on the characteristics of GMP-MSCs is ill defined. We produced fresh and cryopreserved MSCs from human donors with a xenogen-free GMP protocol. Immunogenicity and immunomodulating capacity were tested in co-culture with putative recipient-specific peripheral blood mononuclear cells (PBMCs). Risk of malignant transformation was assessed in vitro and in vivo. Cryopreservation had no impact on viability and consensus criteria of MSCs. In co-culture with PBMCs, MSCs showed low immunogenicity and suppressed mitogen-stimulated proliferation of PBMC irrespective of cryopreservation. Cytogenetic aberrations were not observed consistently in fresh and cryopreserved products, and no signs of malignant transformation occurred in functional assays. MSC products from an elderly pretreated donor showed reduced functional quality, but imminent failure of functional criteria could be detected by an increased population doubling time in early passages. This study is the first systematic analysis on cryopreservation of xenogen-free human bone marrow-derived GMP-MSCs. The data support that cryopreservation does not alter the characteristics of the cells and thus may allow the generation of products for serial transplantation. In addition, the protocol allowed early detection of MSC products with low functional capacity. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Flat-plate solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support research and development for an Experimental Process System Development Unit for producing semiconductor-grade silicon using the slane-to-silicon process are reported. The design activity was completed. About 95% of purchased equipment was received. The draft of the operations manual was about 50% complete and the design of the free-space system continued. The system using silicon power transfer, melting, and shotting on a psuedocontinuous basis was demonstrated.

Functional Grammar and Teaching of Reading--A Pedagogy Based on Graded Teaching of College English in China

ERIC Educational Resources Information Center

Xu, Tuo; Zhang, Beili

2015-01-01

This article discusses the importance of functional grammar and demonstrates its application to the teaching of reading among graded college students. Functional grammar holds that a discourse is composed of two levels: the interior level and the exterior level. Therefore, reading activities involve both linguistic elements and contexts.…

Teacher-Student Interactions in Fifth Grade Classrooms: Relations with Children's Peer Behavior

ERIC Educational Resources Information Center

Luckner, Amy E.; Pianta, Robert C.

2011-01-01

This study investigates the extent to which teacher-student interactions in fifth grade classrooms are associated with peer behavior in fifth grade, accounting for prior peer functioning. Participants included 894 fifth grade students from the NICHD Study of Early Child Care and Youth Development. The quality of teacher-student interactions…

(1-3)(1-6)-β-glucan-enriched materials from Lentinus edodes mushroom as a high-fibre and low-calorie flour substitute for baked foods.

PubMed

Kim, Juyoung; Lee, Seung Mi; Bae, In Young; Park, Hyuk-Gu; Gyu Lee, Hyeon; Lee, Suyong

2011-08-15

Extensive physiological and biological emphasis has been placed on pharmaceutical and medicinal uses of mushrooms containing β-glucans, but their incorporation into processed functional foods is quite limited. Thus, low-grade Lentinus edodes mushrooms were utilised to produce β-glucan-enriched materials (BGEMs), which were evaluated as a high-fibre and low-calorie substitute for wheat flour. The fractions obtained from Lentinus edodes mushrooms contained 514 g kg⁻¹ of (1-3)-β-glucans with (1-6)-β-linked side chains and the chemical structure was confirmed by ¹³C NMR and FTIR spectroscopy. Replacement of a portion of the wheat flour with BGEMs resulted in the solutions with lower values of pasting parameters and also caused significant changes in starch gelatinisation. When BGEMs were incorporated into cake formulations, batter viscosity increased with more shear-thinning behaviours and elastic properties improved. Overall, the cakes containing more BGEMs showed decreased volume and increased hardness while no significant differences were observed between the control and BGEM cakes containing 1 g of β-glucan per serving. As a wheat flour substitute, the BGEMs that were prepared from low-grade Lentinus edodes mushrooms, could be successfully used to produce cakes containing 1 g of β-glucan per serving with quality attributes similar to those of the control. Copyright © 2011 Society of Chemical Industry.

Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling.

PubMed

Melocchi, Alice; Parietti, Federico; Maroni, Alessandra; Foppoli, Anastasia; Gazzaniga, Andrea; Zema, Lucia

2016-07-25

Fused deposition modeling (FDM) is a 3D printing technique based on the deposition of successive layers of thermoplastic materials following their softening/melting. Such a technique holds huge potential for the manufacturing of pharmaceutical products and is currently under extensive investigation. Challenges in this field are mainly related to the paucity of adequate filaments composed of pharmaceutical grade materials, which are needed for feeding the FDM equipment. Accordingly, a number of polymers of common use in pharmaceutical formulation were evaluated as starting materials for fabrication via hot melt extrusion of filaments suitable for FDM processes. By using a twin-screw extruder, filaments based on insoluble (ethylcellulose, Eudragit(®) RL), promptly soluble (polyethylene oxide, Kollicoat(®) IR), enteric soluble (Eudragit(®) L, hydroxypropyl methylcellulose acetate succinate) and swellable/erodible (hydrophilic cellulose derivatives, polyvinyl alcohol, Soluplus(®)) polymers were successfully produced, and the possibility of employing them for printing 600μm thick disks was demonstrated. The behavior of disks as barriers when in contact with aqueous fluids was shown consistent with the functional application of the relevant polymeric components. The produced filaments were thus considered potentially suitable for printing capsules and coating layers for immediate or modified release, and, when loaded with active ingredients, any type of dosage forms. Copyright © 2016 Elsevier B.V. All rights reserved.

7 CFR 1250.516 - Collecting handlers and collection.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RESEARCH AND PROMOTION Rules and Regulations Assessments, Collections, and Remittances § 1250.516... who grades, cartons, or breaks such eggs. Such shell egg breaker or egg packer must collect and remit... person who buys or receives nest run eggs from a producer and who does not grade, carton, or break such...

40 CFR 766.32 - Exclusions and waivers.

Code of Federal Regulations, 2012 CFR

2012-07-01

...: (1) Exclusions may be granted if. (i) Testing of the appropriate grade of the chemical substance has... quantities of 100 kilograms or less per year, only for research and development purposes; or (ii) In the... time and conditions of manufacture or use. The grade of decabromodiphenyl oxide produced by Dow...

7 CFR 1250.516 - Collecting handlers and collection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RESEARCH AND PROMOTION Rules and Regulations Assessments, Collections, and Remittances § 1250.516... who grades, cartons, or breaks such eggs. Such shell egg breaker or egg packer must collect and remit... person who buys or receives nest run eggs from a producer and who does not grade, carton, or break such...

40 CFR 766.32 - Exclusions and waivers.

Code of Federal Regulations, 2014 CFR

2014-07-01

...: (1) Exclusions may be granted if. (i) Testing of the appropriate grade of the chemical substance has... quantities of 100 kilograms or less per year, only for research and development purposes; or (ii) In the... time and conditions of manufacture or use. The grade of decabromodiphenyl oxide produced by Dow...

7 CFR 1250.516 - Collecting handlers and collection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RESEARCH AND PROMOTION Rules and Regulations Assessments, Collections, and Remittances § 1250.516... who grades, cartons, or breaks such eggs. Such shell egg breaker or egg packer must collect and remit... person who buys or receives nest run eggs from a producer and who does not grade, carton, or break such...

40 CFR 766.32 - Exclusions and waivers.

Code of Federal Regulations, 2013 CFR

2013-07-01

...: (1) Exclusions may be granted if. (i) Testing of the appropriate grade of the chemical substance has... quantities of 100 kilograms or less per year, only for research and development purposes; or (ii) In the... time and conditions of manufacture or use. The grade of decabromodiphenyl oxide produced by Dow...

7 CFR 1250.516 - Collecting handlers and collection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RESEARCH AND PROMOTION Rules and Regulations Assessments, Collections, and Remittances § 1250.516... who grades, cartons, or breaks such eggs. Such shell egg breaker or egg packer must collect and remit... person who buys or receives nest run eggs from a producer and who does not grade, carton, or break such...

7 CFR 1250.516 - Collecting handlers and collection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RESEARCH AND PROMOTION Rules and Regulations Assessments, Collections, and Remittances § 1250.516... who grades, cartons, or breaks such eggs. Such shell egg breaker or egg packer must collect and remit... person who buys or receives nest run eggs from a producer and who does not grade, carton, or break such...

40 CFR 766.32 - Exclusions and waivers.

Code of Federal Regulations, 2011 CFR

2011-07-01

...: (1) Exclusions may be granted if. (i) Testing of the appropriate grade of the chemical substance has... quantities of 100 kilograms or less per year, only for research and development purposes; or (ii) In the... time and conditions of manufacture or use. The grade of decabromodiphenyl oxide produced by Dow...

Hippocampal Area CA1 and Remote Memory in Rats

ERIC Educational Resources Information Center

Ocampo, Amber C.; Squire, Larry R.; Clark, Robert E.

2017-01-01

Hippocampal lesions often produce temporally graded retrograde amnesia (TGRA), whereby recent memory is impaired more than remote memory. This finding has provided support for the process of systems consolidation. However, temporally graded memory impairment has not been observed with the watermaze task, and the findings have been inconsistent…

7 CFR 1170.8 - Price reporting specifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Specifications for Dry Whey Prices: (1) Variety: Edible nonhygroscopic. (2) Age: No more than 180 days. (3) Grade..., or tanker. (5) Exclude: Sales of Grade A dry whey, intra-company sales, resales of purchased dry whey... transaction was completed), dry whey produced under faith-based close supervision and marketed at a higher...

Cooperative Learning with a Computer in a Native Language Class.

ERIC Educational Resources Information Center

Bennett, Ruth

In a cooperative task, American Indian elementary students produced bilingual natural history dictionaries using a Macintosh computer. Students in grades 3 through 8 attended weekly, multi-graded bilingual classes in Hupa/English or Yurok/English, held at two public school field sites for training elementary teaching-credential candidates. Teams…

7 CFR 58.505 - Meaning of words.

Code of Federal Regulations, 2011 CFR

2011-01-01

... contain a culture of harmless lactic acid and flavor producing bacteria, food grade acid, salt, and... (21 CFR 133.129), “Nutrient content claims for fat, fatty acid, and cholesterol content of foods... of approved food grade acids. This product shall be labeled according to the requirements of the Food...

7 CFR 58.505 - Meaning of words.

Code of Federal Regulations, 2013 CFR

2013-01-01

... contain a culture of harmless lactic acid and flavor producing bacteria, food grade acid, salt, and... (21 CFR 133.129), “Nutrient content claims for fat, fatty acid, and cholesterol content of foods... of approved food grade acids. This product shall be labeled according to the requirements of the Food...

7 CFR 58.505 - Meaning of words.

Code of Federal Regulations, 2010 CFR

2010-01-01

... contain a culture of harmless lactic acid and flavor producing bacteria, food grade acid, salt, and... (21 CFR 133.129), “Nutrient content claims for fat, fatty acid, and cholesterol content of foods... of approved food grade acids. This product shall be labeled according to the requirements of the Food...

21 CFR 133.129 - Dry curd cottage cheese.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of the following methods is employed: (i) Harmless lactic-acid-producing bacteria, with or without... pressed, chilled, worked, seasoned with salt; or (ii) Food grade phosphoric acid, lactic acid, citric acid..., seasoned with salt. (iii) Food grade acids as provided in paragraph (b)(1)(ii) of this section, D-Glucono...

7 CFR 58.505 - Meaning of words.

Code of Federal Regulations, 2012 CFR

2012-01-01

... contain a culture of harmless lactic acid and flavor producing bacteria, food grade acid, salt, and... (21 CFR 133.129), “Nutrient content claims for fat, fatty acid, and cholesterol content of foods... of approved food grade acids. This product shall be labeled according to the requirements of the Food...

21 CFR 133.129 - Dry curd cottage cheese.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of the following methods is employed: (i) Harmless lactic-acid-producing bacteria, with or without... pressed, chilled, worked, seasoned with salt; or (ii) Food grade phosphoric acid, lactic acid, citric acid..., seasoned with salt. (iii) Food grade acids as provided in paragraph (b)(1)(ii) of this section, D-Glucono...

7 CFR 58.505 - Meaning of words.

Code of Federal Regulations, 2014 CFR

2014-01-01

... contain a culture of harmless lactic acid and flavor producing bacteria, food grade acid, salt, and... (21 CFR 133.129), “Nutrient content claims for fat, fatty acid, and cholesterol content of foods... of approved food grade acids. This product shall be labeled according to the requirements of the Food...

21 CFR 133.129 - Dry curd cottage cheese.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of the following methods is employed: (i) Harmless lactic-acid-producing bacteria, with or without... pressed, chilled, worked, seasoned with salt; or (ii) Food grade phosphoric acid, lactic acid, citric acid..., seasoned with salt. (iii) Food grade acids as provided in paragraph (b)(1)(ii) of this section, D-Glucono...

Grades of Severity and the Validation of an Atopic Dermatitis Assessment Measure (ADAM).

ERIC Educational Resources Information Center

Charman, Denise P.; Varigos, George A.

1999-01-01

Studied the validity of the Atopic Dermatitis Assessment Measure (D. Charman and others, 1999) with 171 pediatric patients in Australia using partial credit analyses to produce clinically relevant "word pictures" of grades of severity for atopic dermatitis. Discusses implications for measurement in medicine. (SLD)

Marketing Practices of Northern Minnesota Sawmills

Treesearch

E.W. Forbes; R.W. Rowe

1968-01-01

Most of the lumber produced in northern Minnesota is marketed in Minnesota, and the marketing area increases as mill size increases. Aspen is a dominant species. About 45 percent of the lumber is graded; concentration and grading would improve marketing. Less than one-third of the by-products are marketed

A CURRICULUM FOR ENGLISH, GRADE 5, UNITS 45-57.

ERIC Educational Resources Information Center

Nebraska Univ., Lincoln. Curriculum Development Center.

THE NEBRASKA ENGLISH CURRICULUM FOR GRADE FIVE CONTINUES THE PRESENTATION OF LITERARY TECHNIQUES USED TO PRODUCE WORKS OF IMAGINATION. IN "TALL TALE AMERICAN," RAPUNZEL," AND OTHER FAIRY TALES, THE AMERICAN AND EUROPEAN FOLK TRADITIONS ARE COMPARED FOR COMMON STYLISTIC AND STRUCTURAL DEVICES. A MORE COMPLEX USE OF TECHNIQUES USED IN…

A priori mesh grading for the numerical calculation of the head-related transfer functions

PubMed Central

Ziegelwanger, Harald; Kreuzer, Wolfgang; Majdak, Piotr

2017-01-01

Head-related transfer functions (HRTFs) describe the directional filtering of the incoming sound caused by the morphology of a listener’s head and pinnae. When an accurate model of a listener’s morphology exists, HRTFs can be calculated numerically with the boundary element method (BEM). However, the general recommendation to model the head and pinnae with at least six elements per wavelength renders the BEM as a time-consuming procedure when calculating HRTFs for the full audible frequency range. In this study, a mesh preprocessing algorithm is proposed, viz., a priori mesh grading, which reduces the computational costs in the HRTF calculation process significantly. The mesh grading algorithm deliberately violates the recommendation of at least six elements per wavelength in certain regions of the head and pinnae and varies the size of elements gradually according to an a priori defined grading function. The evaluation of the algorithm involved HRTFs calculated for various geometric objects including meshes of three human listeners and various grading functions. The numerical accuracy and the predicted sound-localization performance of calculated HRTFs were analyzed. A-priori mesh grading appeared to be suitable for the numerical calculation of HRTFs in the full audible frequency range and outperformed uniform meshes in terms of numerical errors, perception based predictions of sound-localization performance, and computational costs. PMID:28239186

Production of food grade (culinary) steam with geothermal (geo-heat) for industrial use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wehlage, E.F.

1980-09-01

It may be assumed that geothermal steam (dry or flashed) will be sterile but not necessarily clean enough for direct incorporation into foods, beverages, and pharmaceuticals. The use of a purification by unfired geo-heat steam generators can produce a food grade or culinary steam supply for critical use even when combined with fossil fuel used as a booster. Low conductivity, i.e., pure food grade steam requires careful water conditioning outside the generator.

A longitudinal study of visual function in carriers of X-linked recessive retinitis pigmentosa.

PubMed

Grover, S; Fishman, G A; Anderson, R J; Lindeman, M

2000-02-01

This study was carried out to evaluate the progression of visual function impairment in carriers of X-linked recessive retinitis pigmentosa. We also assessed the relationship between the retinal findings at presentation and the extent of deterioration. Observational, retrospective, case series. Twenty-seven carriers of X-linked recessive retinitis pigmentosa. Each carrier was clinically categorized into one of four grades (grades 0 through 3) depending on the presence or absence of a tapetal-like retinal reflex and the extent of peripheral pigmentary degeneration. A complete ophthalmologic examination was performed and data for visual acuity, visual field area, and electroretinographic measurements were collected on the most recent visit in both eyes. These were then compared with similar data obtained on their initial visits. A comparison of visual function was carried out between the initial visit and the most recent visit on each carrier. The visual acuity was measured with Snellen's acuity charts. The visual fields to targets V-4-e and II-4-e were planimeterized and used for the analysis. The electroretinographic (ERG) measures used were light-adapted single-flash b-wave amplitudes and 30-Hz red flicker for cone function, dark-adapted maximal b-wave amplitudes, and response to a low intensity blue-flash for rod function. None of the 11 carriers with a tapetal-like reflex only (grade 1) showed any significant change in visual acuity or fields as compared with 3 of 7 (43%) carriers with diffuse peripheral pigmentary findings (grade 3) who showed significant deterioration in visual acuity in at least one eye, and 6 of 7 (86%) who showed a significant decrease in visual field area with at least one target size in at least one eye. By comparison, only 1 of 10 carriers with a grade 1 fundus finding demonstrated a significant decrease in maximal dark-adapted ERG function as compared with 5 of 6 (83%) carriers with grade 3 in response to a single-flash stimulus and with 4 of 5 (80%) carriers in response to a single-flash blue stimulus. For the single-flash photopic response, none of the 10 carriers with grade 1 showed any significant deterioration, whereas 2 of 4 (50%) with grade 3 did show such deterioration. The ERG responses for carriers with grade 2 were in between the extent of decrease in ERG amplitudes of those in carriers with grades 1 and 3. In our cohort of X-linked retinitis pigmentosa carriers, those with only a tapetal-like retinal reflex at presentation had a better prognosis to retain visual function than those with peripheral retinal pigmentation. These data are useful in counseling such carriers as to their visual prognosis.

Freeze Tape Casting of Functionally Graded Porous Ceramics

NASA Technical Reports Server (NTRS)

Sofie, Stephen W.

2007-01-01

Freeze tape casting is a means of making preforms of ceramic sheets that, upon subsequent completion of fabrication processing, can have anisotropic and/or functionally graded properties that notably include aligned and graded porosity. Freeze tape casting was developed to enable optimization of the microstructures of porous ceramic components for use as solid oxide electrodes in fuel cells: Through alignment and grading of pores, one can tailor surface areas and diffusion channels for flows of gas and liquid species involved in fuel-cell reactions. Freeze tape casting offers similar benefits for fabrication of optimally porous ceramics for use as catalysts, gas sensors, and filters.

Active vibration control of functionally graded beams with piezoelectric layers based on higher order shear deformation theory

NASA Astrophysics Data System (ADS)

Bendine, K.; Boukhoulda, F. B.; Nouari, M.; Satla, Z.

2016-12-01

This paper reports on a study of active vibration control of functionally graded beams with upper and lower surface-bonded piezoelectric layers. The model is based on higher-order shear deformation theory and implemented using the finite element method (FEM). The proprieties of the functionally graded beam (FGB) are graded along the thickness direction. The piezoelectric actuator provides a damping effect on the FGB by means of a velocity feedback control algorithm. A Matlab program has been developed for the FGB model and compared with ANSYS APDL. Using Newmark's method numerical solutions are obtained for the dynamic equations of FGB with piezoelectric layers. Numerical results show the effects of the constituent volume fraction and the influence the feedback control gain on the frequency and dynamic response of FGBs.

Kinetic magnetic resonance imaging analysis of abnormal segmental motion of the functional spine unit.

PubMed

Kong, Min Ho; Hymanson, Henry J; Song, Kwan Young; Chin, Dong Kyu; Cho, Yong Eun; Yoon, Do Heum; Wang, Jeffrey C

2009-04-01

The authors conducted a retrospective observational study using kinetic MR imaging to investigate the relationship between instability, abnormal sagittal segmental motion, and radiographic variables consisting of intervertebral disc degeneration, facet joint osteoarthritis (FJO), degeneration of the interspinous ligaments, ligamentum flavum hypertrophy (LFH), and the status of the paraspinal muscles. Abnormal segmental motion, defined as > 10 degrees angulation and > 3 mm of translation in the sagittal plane, was investigated in 1575 functional spine units (315 patients) in flexion, neutral, and extension postures using kinetic MR imaging. Each segment was assessed based on the extent of disc degeneration (Grades I-V), FJO (Grades 1-4), interspinous ligament degeneration (Grades 1-4), presence of LFH, and paraspinal muscle fatty infiltration observed on kinetic MR imaging. These factors are often noted in patients with degenerative disease, and there are grading systems to describe these changes. For the first time, the authors attempted to address the relationship between these radiographic observations and the effects on the motion and instability of the functional spine unit. The prevalence of abnormal translational motion was significantly higher in patients with Grade IV degenerative discs and Grade 3 arthritic facet joints (p < 0.05). In patients with advanced disc degeneration and FJO, there was a lesser amount of motion in both segmental translation and angulation when compared with lower grades of degeneration, and this difference was statistically significant for angular motion (p < 0.05). Patients with advanced degenerative Grade 4 facet joint arthritis had a significantly lower percentage of abnormal angular motion compared to patients with normal facet joints (p < 0.001). The presence of LFH was strongly associated with abnormal translational and angular motion. Grade 4 interspinous ligament degeneration and the presence of paraspinal muscle fatty infiltration were both significantly associated with excessive abnormal angular motion (p < 0.05). This kinetic MR imaging analysis showed that the lumbar functional unit with more disc degeneration, FJO, and LFH had abnormal sagittal plane translation and angulation. These findings suggest that abnormal segmental motion noted on kinetic MR images is closely associated with disc degeneration, FJO, and the pathological characteristics of interspinous ligaments, ligamentum flavum, and paraspinal muscles. Kinetic MR imaging in patients with mechanical back pain may prove a valuable source of information about the stability of the functional spine unit by measuring abnormal segmental motion and grading of radiographic parameters simultaneously.

An Analysis of Grade 11 Learners' Levels of Understanding of Functions in Terms of APOS Theory

ERIC Educational Resources Information Center

Chimhande, Tinoda; Naidoo, Ana; Stols, Gerrit

2017-01-01

This article reports on a study of six Grade 11 learners' levels of understanding of concepts related to the function definition and representation. Task-based clinical interviews were used to elicit the learners' interpretations and reasoning when working with these function-related concepts. Indicators for Action-Process-Object-Schema (APOS)…

A Preliminary Study of Bully and Victim Behavior in Old-for-Grade Students: Another Potential Hidden Cost of Grade Retention or Delayed School Entry

ERIC Educational Resources Information Center

Crothers, Laura M.; Schreiber, James B.; Schmitt, Ara J.; Bell, G. Ronald; Blasik, Jessica; Comstock, Leigh A.; Greisler, Michael J.; Keener, Dana; King, Jamie M.; Lipinski, John

2010-01-01

Mounting evidence suggests that being an old-for-grade student, as a result of grade retention or delayed school entry, is related to negative outcomes across various domains of functioning. No known study has examined the relations between old-for-grade status and specific childhood/adolescent bully and victim behaviors. The first purpose of this…

Assessment of Thermal Performance of Functionally Graded Materials in Longitudinal Fins

NASA Astrophysics Data System (ADS)

Hassanzadeh, R.; Bilgili, M.

2018-01-01

Assessment of the thermal characteristics of materials in heat exchangers with longitudinal fins is performed in the case where a conventional homogeneous material of a longitudinal fin is replaced by a functionally graded one, in which the fin material properties, such as the conductivity, are assumed to be graded as linear and power-law functions along the normal axis from the fin base to the fin tip. The resulting equations are calculated under two (Dirichlet and Neumann) boundary conditions. The equations are solved by an approximate analytical method with the use of the mean value theorem. The results show that the inhomogeneity index of a functionally graded material plays an important role for the thermal energy characteristics in such heat exchangers. In addition, it is observed that the use of such a material in longitudinal fins enhances the rate of heat transfer between the fin surface and surrounding fluid. Hopefully, the results obtained in the study will arouse interest of designers in heat exchange industry.

Design, Manufacturing and Characterization of Functionally Graded Flextensional Piezoelectric Actuators

NASA Astrophysics Data System (ADS)

Amigo, R. C. R.; Vatanabe, S. L.; Silva, E. C. N.

2013-03-01

Previous works have been shown several advantages in using Functionally Graded Materials (FGMs) for the performance of flextensional devices, such as reduction of stress concentrations and gains in reliability. In this work, the FGM concept is explored in the design of graded devices by using the Topology Optimization Method (TOM), in order to determine optimal topologies and gradations of the coupled structures of piezoactuators. The graded pieces are manufactured by using the Spark Plasma Sintering (SPS) technique and are bonded to piezoelectric ceramics. The graded actuators are then tested by using a modular vibrometer system for measuring output displacements, in order to validate the numerical simulations. The technological path developed here represents the initial step toward the manufacturing of an integral piezoelectric device, constituted by piezoelectric and non-piezoelectric materials without bonding layers.

Parental Autonomy Granting and School Functioning among Chinese Adolescents: The Moderating Role of Adolescents' Cultural Values.

PubMed

Wang, Cixin; Do, Kieu Anh; Bao, Leiping; Xia, Yan R; Wu, Chaorong

2017-01-01

School adjustment and achievement are important indicators of adolescents' well-being; however, few studies have examined the risk and protective factors predicting students' school adjustment and achievement at the individual, familial, and cultural level. The present study examined the influences of individual and familial factors and cultural values on Chinese adolescents' school functioning (e.g., school adjustment and grades). It also tested whether cultural values moderated the relationship between parenting and adolescents' school functioning. Self-report data were collected from a stratified random sample of 2,864 adolescents (51.5% female, mean age = 15.52 years, grade 6th - 12th) from 55 classrooms, in 13 schools in Shanghai, China. Results showed that self-esteem ( b se→adj = 0.05, SE = 0.01, p < 0.001; b se→grades = 0.08, SE = 0.02, p < 0.001), parent-adolescent conflict ( b conflict→adj = -0.03, SE = 0.00, p < 0.001; b conflict→grades = -0.04, SE = 0.01, p < 0.001), and conformity to parental expectations ( b conform→adj = -0.03, SE = 0.02, p < 0.05; b conform→grades = 0.10, SE = 0.04, p < 0.05) all had significant effects on both school adjustment and grades, respectively. More importantly, results showed that independent self-construal moderated the relationship between parental autonomy granting and adolescents' grades ( b indepxautom = 0.06, SE = 0.02, p < 0.01). The findings suggest that cultural values may influence adolescents' appraisal of parental autonomy granting, which then impacts their school functioning.

Junior High Students Produce Daily TV Today Program

ERIC Educational Resources Information Center

Worzala, Louise Hicks

1976-01-01

Describes the seven-minute, closed-circuit television program for 500 students and teachers which is entirely planned and produced by an eighth grade broadcast journalism class at a McHenry (Illinois) junior high school. (JM)

Cytotoxicity of Protein-Carbon Nanotubes on J774 Macrophages Is a Functionalization Grade-Dependent Effect

PubMed Central

Montes-Fonseca, Silvia Lorena; Sánchez-Ramírez, Blanca; Luna-Velasco, Antonia; Arzate-Quintana, Carlos; Silva-Cazares, Macrina Beatriz; González Horta, Carmen

2015-01-01

Carbon nanotubes (CNTs) are used as carriers in medicine due to their ability to be functionalized with chemical substances. However, cytotoxicity analysis is required prior to use for in vivo models. The aim of this study was to evaluate the cytotoxic effect of CNTs functionalized with a 46 kDa surface protein from Entamoeba histolytica (P46-CNTs) on J774A macrophages. With this purpose, CNTs were synthesized by spray pyrolysis and purified (P-CNTs) using sonication for 48 h. A 46 kDa protein, with a 4.6–5.4 pI range, was isolated from E. histolytica HM1:IMSS strain trophozoites using an OFFGEL system. The P-CNTs were functionalized with the purified 46 kDa protein, classified according to their degree of functionalization, and characterized by Raman and Infrared spectroscopy. In vitro cytotoxicity was evaluated by MTT, apoptosis, and morphological assays. The results demonstrated that P46-CNTs exhibited cytotoxicity dependent upon the functionalized grade. Contrary to what was expected, P46-CNTs with a high grade of functionalization were more toxic to J774 macrophages than P46-CNTs with a low grade of functionalization, than P-CNTs, and had a similar level of toxicity as UP-CNT. This suggests that the nature of the functionalized protein plays a key role in the cytotoxicity of these nanoparticles. PMID:26075262

Production of Solar-grade Silicon by Halidothermic Reduction of Silicon Tetrachloride

NASA Astrophysics Data System (ADS)

Yasuda, Kouji; Saegusa, Kunio; Okabe, Toru H.

2011-02-01

To develop a new production process for solar-grade Si, a fundamental study on halidothermic reduction based on the subhalide reduction of SiCl4 by Al subchloride reductant was carried out at 1273 K (1000 °C). Aluminum subchloride reductant was produced by reacting AlCl3 vapor with metallic Al. Silicon tetrachloride was reduced to Si in a gas-phase reaction by vapors of Al subchloride reductant. Silicon deposits produced in the halidothermic reduction were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray fluorescence (XRF). The Al content in the Si deposits was no more than 0.5 at pct. The Si deposits have a fibrous or hexagonal columnar morphology with diameters ranging from 100 nm to several tens of microns. The reaction was discussed by comparison with the results of the conventional aluminothermic reduction of SiCl4. Moreover, the halidothermic reduction reactions were analyzed from thermodynamical viewpoints. This study demonstrates the feasibility of a halidothermic reduction for producing solar-grade Si with high productivity.

Analogies between Kirchhoff plates and functionally graded Saint-Venant beams under torsion

NASA Astrophysics Data System (ADS)

Barretta, Raffaele; Luciano, Raimondo

2015-05-01

Exact solutions of elastic Kirchhoff plates are available only for special geometries, loadings and kinematic boundary constraints. An effective solution procedure, based on an analogy between functionally graded orthotropic Saint-Venant beams under torsion and inhomogeneous isotropic Kirchhoff plates, with no kinematic boundary constraints, is proposed. The result extends the one contributed in Barretta (Acta Mech 224(12):2955-2964, 2013) for the special case of homogeneous Saint-Venant beams under torsion. Closed-form solutions for displacement, bending-twisting moment and curvature fields of an elliptic plate, corresponding to a functionally graded orthotropic beam, are evaluated. A new benchmark for computational mechanics is thus provided.

Life cycle inventory for palm based plywood: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Ahmad, Shamim; Sahid, Ismail; Subramaniam, Vijaya; Muhamad, Halimah; Mokhtar, Anis

2013-11-01

The oil palm industry heavily relies on the world market. It is essential to ensure that the oil palm industry is ready to meet the demands and expectation of these overseas customers on the environmental performance of the oil palm industry. Malaysia produces 13.9 million tons of oil palm biomass including oil palm trunk (OPT), frond and empty fruits bunches (EFB) annually. OPT felled in some oil palm plantations during replanting is transported to various industries and one such industry is the plywood factories. In order to gauge the environmental performance of the use of OPT as plywood a Life Cycle Assessment (LCA) study was conducted for palm based plywood. LCA is an important tool to assess the environmental performance of a product or process. Life cycle inventory (LCI) is the heart of a LCA study. This LCI study has a gate-to-gate system boundary and the functional unit is 1 m3 palm plywood produced and covers three types of plywood; Moisture Resistance Plywood (MR), Weather Boiling Proof Plywood Grade 1 (WBP Grade 1) at Factory D and Weather Boiling Proof Plywood Grade 2 (WBP Grade 2) at Factory E. Both factories use two different types of drying processes; conventional drying at Factory D and kiln drying at Factory E. This inventory data was collected from two factories (D and E) representing 40% of Malaysia palm plywood industry. The inputs are mainly the raw materials which are the oil palm trunks and tropical wood veneers and the energy from diesel and electricity from grid which is mainly used for the drying process. The other inputs include water, urea formaldehyde, phenol formaldehyde, flour and melamine powder. The outputs are the biomass waste which consists of oil palm trunk off-cut and emission from boiler. Generally, all types of plywood production use almost same materials and processing methods in different quantities. Due to the different process efficiency, Factory D uses less input of raw materials and energy compared to Factory E.

Graded-index fibers, Wigner-distribution functions, and the fractional Fourier transform.

PubMed

Mendlovic, D; Ozaktas, H M; Lohmann, A W

1994-09-10

Two definitions of a fractional Fourier transform have been proposed previously. One is based on the propagation of a wave field through a graded-index medium, and the other is based on rotating a function's Wigner distribution. It is shown that both definitions are equivalent. An important result of this equivalency is that the Wigner distribution of a wave field rotates as the wave field propagates through a quadratic graded-index medium. The relation with ray-optics phase space is discussed.

Validation of Spectral Analysis as a Noninvasive Tool to Assess Autonomic Regulation of Cardiovascular Function

NASA Technical Reports Server (NTRS)

Knapp, Charles F.; Evans, Joyce M.

1996-01-01

A major focus of our program has been to develop a sensitive noninvasive procedure to quantify early weightlessness-induced changes in cardiovascular function or potential dysfunction. Forty studies of healthy young volunteers (10 men and 10 women, each studied twice) were conducted to determine changes in the sympatho-vagal balance of autonomic control of cardiovascular regulation during graded headward and footward blood volume shifts. Changes in sympatho-vagal balance were classified by changes in the mean levels and spectral content of cardiovascular variables and verified by changes in circulating levels of catecholamines and pancreatic polypeptide. Possible shifts in intra/extravascular fluid were assessed from changes in hematocrit and plasma mass density while changes in the stimulus to regulate plasma volume were determined from Plasma Renin Activity (PRA). Autonomic blockade was used to unmask the relative contribution of sympathetic and parasympathetic efferent influences in response to 10 min each of 0, 20 and 40 mmHg Lower Body Negative Pressure (LBNP) and 15 and 30 mmHg Positive Pressure (LBPP). The combination of muscarinic blockade with graded LBNP and LBPP was used to evoke graded increases and decreases in sympathetic activity without parasympathetic contributions. The combination of beta blockade with graded LBNP and LBPP was used to produce graded increases and decreases in parasympathetic activity without beta sympathetic contributions. Finally, a combination of both beta and muscarinic blockades with LBNP and LBPP was used to determine the contribution from other, primarily alpha adrenergic, sources. Mean values, spectral analyses and time frequency analysis of R-R interval (HR), Arterial Pressure (AP), peripheral blood flow (RF), Stroke Volume (SV) and peripheral resistance (TPR) were performed for all phases of the study. Skin blood Flow (SF) was also measured in other studies and similarly analyzed. Spectra were examined for changes in three frequency regions (low 0.006 - 0.005 Hz (LF), mid 0.05 - 0.15 Hz (W), and high 0.15 - 0.45 Hz (EF)). The primary objective of the study was to indicate which changes in the mean values and/or spectra of cardiovascular variables consistently correlated with changes in sympatho-vagal balance in response to headward and footward fluid shifts. A secondaey objective was to quantify the vascular and extravascular fluid shifts evoked by LBNP and LBPP. The principal hypothesis being tested was that headward fluid shifts would evoke an increase in parasympathetic activity and footward fluid shifts would evoke an increase in sympathetic activity both of which would be detected by spectral analysis and verified by circulating hormones. Hematocrit (HCT), plasma mass density and plasma renin activity increased with muscarinic blockade and with LBNP, a response indicative of a plasma shift to extravascular spaces. Beta blockade alone or after muscarinic blockade had no effect on HCT or plasma mass density. With respect to intravascular fluid volume distribution, LBNP and LBPP produced sufficient upper body vascular fluid shifts to evoke appropriate autonomic regulatory responses.

Grade 5 Students' Online Argumentation about Their In-Class Inquiry Investigations

ERIC Educational Resources Information Center

Choi, Aeran; Hand, Brian; Norton-Meier, Lori

2014-01-01

This study examined the extent to which fifth-grade students participate in online argumentation and the argument patterns they produced about the inquiry-based investigations completed using the Science Writing Heuristic approach in their science classes. One hundred twenty-nine students from five classes of two teachers in a Midwestern public…

Low-grade hardwood lumber production, markets, and issues

Treesearch

Dan Cumbo; Robert Smith; Philip A. Araman

2003-01-01

Due to recent downturn in the economy and changes in traditional hardwood markets. U.S. hardwood manufacturers are facing significant difficulties. In particular, markets for low-grade lumber have been diminishing, while increased levels of the material are being produced at hardwood sawmills in the United States. A nationwide survey of hardwood lumber manufacturers...

What Fifth-Grade Students Reveal about Their Literacies by Writing and Telling Narratives

ERIC Educational Resources Information Center

Davis, Dennis S.

2013-01-01

Written and oral literacy narratives produced by seven fifth-grade students are examined to identify the literacy identities students construct when narrating their past and present experiences with reading and writing. The narrative analyses reveal four major findings: 1. The students who contributed to this study have experienced literacy in…

Guidelines for assigning allowable properties to visually graded foreign species based on test data from full sized specimens

Treesearch

David W. Green; Bradley E. Shelley

2006-01-01

The objective of this document is to provide philosophy and guidelines for the assignment of allowable properties to visually graded dimension lumber produced from trees not grown in the United States. This document assumes, as a starting point, the procedures of ASTM D 1990.

Sawmilling practices for hardwoods

Treesearch

John. Dramm

2013-01-01

The Sawmill Improvement Program (SIP) provides guidance to improve the bottom line of a sawmill both by recovering more lumber from a log and by using simplified procedures to produce more grade lumber. Lessons learned from SIP have led to improved yields of grade lumber through improved log manufacturing, reducing sawing variation by using thinner kerf saws and better...

77 FR 31719 - Grading and Inspection, General Specifications for Approved Plants and Standards for Grades of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... 400 dairy manufacturing plants. All of the dairy manufacturing plants utilizing the program would be... contamination. Because milk production predominantly occurs in clean, modern facilities, using sealed lines... for those producers using cans for milk collection where there is a risk of sediment contamination...

Integrated least-cost lumber grade-mix solver

Treesearch

U. Buehlmann; R. Buck; R.E. Thomas

2011-01-01

Hardwood lumber costs account for up to 70 percent of the total product costs of U.S. secondary wood products producers. Reducing these costs is difficult and often requires substantial capital investments. However, lumber-purchasing costs can be minimized by buying the least-cost lumber grade-mix that satisfies a company's component needs. Price differentials...

Empirical Sampling Distributions of Equating Coefficients for Graded and Nominal Response Instruments.

ERIC Educational Resources Information Center

Baker, Frank B.

1997-01-01

Examined the sampling distributions of equating coefficients produced by the characteristic curve method for tests using graded and nominal response scoring using simulated data. For both models and across all three equating situations, the sampling distributions were generally bell-shaped and peaked, and occasionally had a small degree of…

The comprehension and production of quantifiers in isiXhosa-speaking Grade 1 learners

PubMed Central

Southwood, Frenette

2016-01-01

Background Quantifiers form part of the discourse-internal linguistic devices that children need to access and produce narratives and other classroom discourse. Little is known about the development - especially the prodiction - of quantifiers in child language, specifically in speakers of an African language. Objectives The study aimed to ascertain how well Grade 1 isiXhosa first language (L1) learners perform at the beginning and at the end of Grade 1 on quantifier comprehension and production tasks. Method Two low socioeconomic groups of L1 isiXhosa learners with either isiXhosa or English as language of learning and teaching (LOLT) were tested in February and November of their Grade 1 year with tasks targeting several quantifiers. Results The isiXhosa LOLT group comprehended no/none, any and all fully either in February or then in November of Grade 1, and they produced all assessed quantifiers in February of Grade 1. For the English LOLT group, neither the comprehension nor the production of quantifiers was mastered by the end of Grade 1, although there was a significant increase in both their comprehension and production scores. Conclusion The English LOLT group made significant progress in comprehension and production of quantifiers, but still performed worse than peers who had their L1 as LOLT. Generally, children with no or very little prior knowledge of the LOLT need either, (1) more deliberate exposure to quantifier-rich language or, (2) longer exposure to general classroom language before quantifiers can be expected to be mastered sufficiently to allow access to quantifier-related curriculum content. PMID:27245132

Construction of a Food Grade Recombinant Bacillus subtilis Based on Replicative Plasmids with an Auxotrophic Marker for Biotransformation of d-Fructose to d-Allulose.

PubMed

He, Weiwei; Mu, Wanmeng; Jiang, Bo; Yan, Xin; Zhang, Tao

2016-04-27

A food grade recombinant Bacillus subtilis that produces d-psicose 3-epimerase (DPEase; EC 5.1.3.30) was constructed by transforming a replicative multicopy plasmid with a d-alanine racemase gene marker into B. subtilis 1A751 with the d-alanine racemase gene knocked out. The DPEase was expressed in B. subtilis without antibiotic resistance genes and without adding antibiotics during fermentation. Whole cells of the food grade recombinant B. subtilis were used to biotransform d-fructose to d-allulose. The two tandem promoters, including the HpaII and P43 promoters, increased expression levels compared to the use of one promoter, HpaII. For large-scale d-allulose production, the optimal enzyme dose was 40 enzyme activity units of dry cells per gram of d-fructose, which produced a 28.5% turnover yield in 60 min. The recombinant plasmid exhibited stability over 100 generations. This food grade recombinant B. subtilis may be used for large-scale d-allulose production in the food industry.

Dynamic osteosynthesis by modified Kuntscher nail for the treatment of tibial diaphyseal fractures.

PubMed

Gadegone, Wasudeo M; Salphale, Yogesh S

2009-04-01

We evaluated a series of diaphyseal fractures of the tibia using low-cost, Indian-made modified Kuntscher nail (Daga nail) with the provision of distal locking screw for the management of the tibial diaphyseal fractures. One hundred and fifty one consecutive patients with diaphyseal fractures of tibia with 151 fractures who were treated by Daga nail were enrolled. One of the patients who had died because of cancer, and the two patients who were lost to follow-up at 3 months were excluded from the study.Therefore data of 148 patients with one hundred and fortyeight fractures is described. One hundred twenty closed fractures, 20 open Grade I fractures, and eight open Grade II fractures as per Gustilo and Anderson classification were included in this study. One hundred fourteen men and 34 women, with a mean age of 38.4 years, were studied. The result were analysed for Surgical time, duration of hospitalisation, union time, union rate, complication rate, functional recovery and crutch walking time. The fractures were followed at least until the time of solid union. The follow-up period averaged 15 months (range, 6-26 months). Union occurred in 140 cases (94.6%). The mean time to union was 13 weeks for closed fractures,17.8 weeks for Grade I open fractures, and 21.6 weeks for Grade II open fractures. Compartment syndrome occurred in two patients. Superficial infection occurred in five cases of Grade I and II compound fractures. Three closed fractures and one case of Grade I compound fracture required bone grafting for delayed union. Two cases of Grade II compound fracture with nonunion required revision surgery and bone grafting. Twelve cases resulted in acceptable malalignment due to operative technical error. In four cases, the distal screw breakage was seen, but none of these complications interfered with fracture healing. Recovery of joint motion was essentially normal in those patients without knee or ankle injury. Unreamed distally locked dynamic tibial nailing (modified Kuntscher nail/Daga nail) can produce excellent clinical results for diaphyseal tibial fractures. It has the advantages of technical simplicity, minimal cost, user-friendly instrumentation, and a short learning curve.

Presence of transient hydronephrosis immediately after surgery has a limited influence on renal function 1 year after ileal neobladder construction.

PubMed

Narita, Takuma; Hatakeyama, Shingo; Koie, Takuya; Hosogoe, Shogo; Matsumoto, Teppei; Soma, Osamu; Yamamoto, Hayato; Yoneyama, Tohru; Tobisawa, Yuki; Yoneyama, Takahiro; Hashimoto, Yasuhiro; Ohyama, Chikara

2017-08-31

Urinary tract obstruction and postoperative hydronephrosis are risk factor for renal function deterioration after orthotopic ileal neobladder construction. However, reports of relationship between transient hydronephrosis and renal function are limited. We assess the influence of postoperative transient hydronephrosis on renal function in patients with orthotopic ileal neobladder construction. Between January 2006 and June 2013, we performed radical cystectomy in 164 patients, and 101 received orthotopic ileal neobladder construction. This study included data available from 64 patients with 128 renal units who were enrolled retrospectively. The hydronephrosis grade of each renal unit scored 0-4. The patients were divided into 4 groups according to the grade of hydronephrosis: control, low, intermediate, and high. The grade of postoperative hydronephrosis was compared with renal function 1 month and 1 year after surgery. There were no significant differences in renal function before surgery between groups. One month after surgery, the presence of hydronephrosis was significantly associated with decreased renal function. However, 1 year after urinary diversion hydronephrosis grades were improved significantly, and renal function was comparable between groups. Postoperative hydronephrosis at 1 month had no significant influence on renal function 1 year after ileal neobladder construction. Limitations include retrospective design, short follow-up periods, and a sample composition. The presence of transient hydronephrosis immediately after surgery may have limited influence on renal function 1 year after ileal neobladder construction.

Regulation of muscle sympathetic nerve activity after bed rest deconditioning

NASA Technical Reports Server (NTRS)

Pawelczyk, J. A.; Zuckerman, J. H.; Blomqvist, C. G.; Levine, B. D.

2001-01-01

Cardiovascular deconditioning reduces orthostatic tolerance. To determine whether changes in autonomic function might produce this effect, we developed stimulus-response curves relating limb vascular resistance, muscle sympathetic nerve activity (MSNA), and pulmonary capillary wedge pressure (PCWP) with seven subjects before and after 18 days of -6 degrees head-down bed rest. Both lower body negative pressure (LBNP; -15 and -30 mmHg) and rapid saline infusion (15 and 30 ml/kg body wt) were used to produce a wide variation in PCWP. Orthostatic tolerance was assessed with graded LBNP to presyncope. Bed rest reduced LBNP tolerance from 23.9 +/- 2.1 to 21.2 +/- 1.5 min, respectively (means +/- SE, P = 0.02). The MSNA-PCWP relationship was unchanged after bed rest, though at any stage of the LBNP protocol PCWP was lower, and MSNA was greater. Thus bed rest deconditioning produced hypovolemia, causing a shift in operating point on the stimulus-response curve. The relationship between limb vascular resistance and MSNA was not significantly altered after bed rest. We conclude that bed rest deconditioning does not alter reflex control of MSNA, but may produce orthostatic intolerance through a combination of hypovolemia and cardiac atrophy.

Advanced Placement Mathematics Calculus, Grade 12 Curriculum Guide.

ERIC Educational Resources Information Center

Scharf, John; And Others

This document is a guide to the advanced placement program in calculus for grade 12 in the city schools in Warren, Ohio. The program covers analytic geometry, differential and integral calculus of algebraic functions, elementary transcendental functions, and applications of differentiation and integration. The philosophy and aims of the program…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Yong; Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996; Liu Fengxiao

Cemented carbides with a functionally graded structure have significantly improved mechanical properties and lifetimes in cutting, drilling and molding. In this work, WC-6 wt.% Co cemented carbides with three-layer graded structure (surface layer rich in WC, mid layer rich in Co and the inner part of the average composition) were prepared by carburizing pre-sintered {eta}-phase-containing cemented carbides. The three-point bending fatigue tests based on the total-life approach were conducted on both WC-6wt%Co functionally graded cemented carbides (FGCC) and conventional WC-6wt%Co cemented carbides. The functionally graded cemented carbide shows a slightly higher fatigue limit ({approx}100 MPa) than the conventional ones undermore » the present testing conditions. However, the fatigue crack nucleation behavior of FGCC is different from that of the conventional ones. The crack nucleates preferentially along the Co-gradient and perpendicular to the tension surface in FGCC, while parallel to the tension surface in conventional cemented carbides.« less

Is the Sky Falling? Grade Inflation and the Signaling Power of Grades

PubMed Central

Pattison, Evangeleen; Grodsky, Eric; Muller, Chandra

2014-01-01

Grades are the fundamental currency of our educational system; they signal academic achievement and non-cognitive skills to parents, employers, postsecondary gatekeepers, and students themselves. Grade inflation compromises the signaling value of grades, undermining their capacity to achieve the functions for which they are intended. We challenge the ‘increases in grade point average’ definition of grade inflation and argue that grade inflation must be understood in terms of the signaling power of grades. Analyzing data from four nationally representative samples, we find that in the decades following 1972: (a) grades have risen at high schools and dropped at four-year colleges, in general, and selective four-year institutions, in particular; and (b) the signaling power of grades has attenuated little, if at all. PMID:25288826

Are middle schools harmful? The role of transition timing, classroom quality and school characteristics.

PubMed

Holas, Igor; Huston, Aletha C

2012-03-01

Are middle schools ill-suited for early adolescents, or can school characteristics account for any differences in student functioning? Achievement, school engagement, and perceived competence of children starting middle schools in 5th and 6th grades were compared to those of their same-grade peers in elementary schools in a national, longitudinal sample (NICHD Study of Early Child Care and Youth Development, n = 855; 52% Female, 82% White). Classroom quality (observed and teacher-reported) and school characteristics (composition and size) were considered as explanations for any relationships between school-level and student functioning. Fifth grade middle school students did not differ from those in elementary school, but students entering middle school in 6th grade, compared to those in elementary school, experienced lower classroom quality, which in turn predicted slightly lower achievement. They also had lower school engagement, explained by larger school size. Classroom quality and school characteristics predicted youth functioning regardless of school type. We suggest reshaping the research and policy debate with renewed focus on classroom quality and school size instead of grade organization.

The effects of a graded activity intervention for low back pain in occupational health on sick leave, functional status and pain: 12-month results of a randomized controlled trial.

PubMed

Hlobil, Hynek; Staal, J Bart; Twisk, Jos; Köke, Albere; Ariëns, Geertje; Smid, Tjabe; van Mechelen, Willem

2005-12-01

Behaviorally oriented graded activity interventions have been suggested for sick-listed workers with low back pain on return to work, but have not been extensively evaluated. One hundred and thirty-four workers were randomly assigned to either a graded activity intervention (n = 67) or usual care (n = 67) and followed-up for 12 months. The graded activity group returned back to work faster with a median of 54 days compared to 67 days in the usual care group. The graded activity intervention was more effective after approximately 50 days post-randomization (HRR = 1.9, CI = 1.2-3.1, p = 0.01). Differences between the groups in number of recurrent episodes, total number of days of sick leave due to low back pain, and total number of days of sick leave due to all diagnoses, were in favor of the graded activity group, although not statistically significant. No effects of the graded activity intervention were found for functional status or pain. Graded activity intervention is a valuable strategy to enhance short-term return to work outcomes.

Propagation of ultrasonic Love waves in nonhomogeneous elastic functionally graded materials.

PubMed

Kiełczyński, P; Szalewski, M; Balcerzak, A; Wieja, K

2016-02-01

This paper presents a theoretical study of the propagation behavior of ultrasonic Love waves in nonhomogeneous functionally graded elastic materials, which is a vital problem in the mechanics of solids. The elastic properties (shear modulus) of a semi-infinite elastic half-space vary monotonically with the depth (distance from the surface of the material). The Direct Sturm-Liouville Problem that describes the propagation of Love waves in nonhomogeneous elastic functionally graded materials is formulated and solved by using two methods: i.e., (1) Finite Difference Method, and (2) Haskell-Thompson Transfer Matrix Method. The dispersion curves of phase and group velocity of surface Love waves in inhomogeneous elastic graded materials are evaluated. The integral formula for the group velocity of Love waves in nonhomogeneous elastic graded materials has been established. The effect of elastic non-homogeneities on the dispersion curves of Love waves is discussed. Two Love wave waveguide structures are analyzed: (1) a nonhomogeneous elastic surface layer deposited on a homogeneous elastic substrate, and (2) a semi-infinite nonhomogeneous elastic half-space. Obtained in this work, the phase and group velocity dispersion curves of Love waves propagating in the considered nonhomogeneous elastic waveguides have not previously been reported in the scientific literature. The results of this paper may give a deeper insight into the nature of Love waves propagation in elastic nonhomogeneous functionally graded materials, and can provide theoretical guidance for the design and optimization of Love wave based devices. Copyright © 2015 Elsevier B.V. All rights reserved.

7 CFR 1033.12 - Producer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumption as Grade A milk and whose milk is: (1) Received at a pool plant directly from the producer or...) A dairy farmer whose milk is received at an exempt plant, excluding producer milk diverted to the exempt plant pursuant to § 1033.13(d); (3) A dairy farmer whose milk is received by diversion at a pool...

7 CFR 1030.12 - Producer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumption as Grade A milk and whose milk is: (1) Received at a pool plant directly from the producer or...) A dairy farmer whose milk is received at an exempt plant, excluding producer milk diverted to the exempt plant pursuant to § 1030.13(d); (3) A dairy farmer whose milk is received by diversion at a pool...

7 CFR 1030.12 - Producer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumption as Grade A milk and whose milk is: (1) Received at a pool plant directly from the producer or...) A dairy farmer whose milk is received at an exempt plant, excluding producer milk diverted to the exempt plant pursuant to § 1030.13(d); (3) A dairy farmer whose milk is received by diversion at a pool...

7 CFR 1033.12 - Producer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumption as Grade A milk and whose milk is: (1) Received at a pool plant directly from the producer or...) A dairy farmer whose milk is received at an exempt plant, excluding producer milk diverted to the exempt plant pursuant to § 1033.13(d); (3) A dairy farmer whose milk is received by diversion at a pool...

Relationship between cognitive functions and prevalence of fatigue in elementary and junior high school students.

PubMed

Mizuno, Kei; Tanaka, Masaaki; Fukuda, Sanae; Imai-Matsumura, Kyoko; Watanabe, Yasuyoshi

2011-06-01

Fatigue is a common complaint among elementary and junior high school students, and is related to poor academic performance. Since grade-dependent development of cognitive functions also influences academic performance, we attempted to determine whether cognitive functions were associated with the prevalence of fatigue. Participants were 148 elementary school students from 4th- to 6th-grades and 152 junior high school students from 7th- to 9th-grades. Participants completed a questionnaire about fatigue (Japanese version of the Chalder Fatigue Scale) and paper-and-pencil and computerized cognitive tests which could evaluate the abilities of motor processing, immediate, delayed and working memory, selective, divided and alternative attention, retrieve learned material, and spatial construction. We found that in multivariate logistic regression analyses adjusted for grade and gender, slow motor processing was positively correlated with the prevalence of fatigue in the elementary school students and decreases in working memory and divided and alternative attention processing were positively correlated with the prevalence of fatigue in the junior high school students. The grade-dependent development of cognitive function influences the severity of fatigue in elementary and junior high school students. Copyright © 2010 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Fermentation pH Modulates the Size Distributions and Functional Properties of Gluconobacter albidus TMW 2.1191 Levan

PubMed Central

Ua-Arak, Tharalinee; Jakob, Frank; Vogel, Rudi F.

2017-01-01

Bacterial levan has gained an increasing interest over the last decades due to its unique characteristics and multiple possible applications. Levan and other exopolysaccharides (EPSs) production are usually optimized to obtain the highest concentration or yield while a possible change of the molecular size and mass during the production process is mostly neglected. In this study, the molar mass and radius of levan samples were monitored during fermentations with the food-grade, levan-producing acetic acid bacterium Gluconobacter (G.) albidus TMW 2.1191 in shake flasks (without pH control) and bioreactors (with pH control at 4.5, 5.5 and 6.5, respectively). In uncontrolled fermentations, the levan size/molar mass continuously decreased concomitantly with the continuous acidification of the nutrient medium. On the contrary, the amount, molar mass and size of levan could be directly influenced by controlling the pH during fermentation. Using equal initial substrate amounts, the largest weight average molar mass and geometric radius of levan were observed at constant pH 6.5, while the highest levan concentration was obtained at constant pH 4.5. Since there is a special demand to find suitable hydrocolloids from food-grade bacteria to develop novel gluten-free (GF) products, these differently produced levans were used for baking of GF breads, and the best quality improvement was obtained by addition of levan with the highest mass and radius. This work, therefore, demonstrates for the first time that one bacterial strain can produce specific high molecular weight fractions of one EPS type, which differ in properties and sizes among each other in dependence of the controllable production conditions. PMID:28522999

Production and purification of lentiviral vectors generated in 293T suspension cells with baculoviral vectors.

PubMed

Lesch, H P; Laitinen, A; Peixoto, C; Vicente, T; Makkonen, K-E; Laitinen, L; Pikkarainen, J T; Samaranayake, H; Alves, P M; Carrondo, M J T; Ylä-Herttuala, S; Airenne, K J

2011-06-01

Lentivirus can be engineered to be a highly potent vector for gene therapy applications. However, generation of clinical grade vectors in enough quantities for therapeutic use is still troublesome and limits the preclinical and clinical experiments. As a first step to solve this unmet need we recently introduced a baculovirus-based production system for lentiviral vector (LV) production using adherent cells. Herein, we have adapted and optimized the production of these vectors to a suspension cell culture system using recombinant baculoviruses delivering all elements required for a safe latest generation LV preparation. High-titer LV stocks were achieved in 293T cells grown in suspension. Produced viruses were accurately characterized and the functionality was also tested in vivo. Produced viruses were compared with viruses produced by calcium phosphate transfection method in adherent cells and polyethylenimine transfection method in suspension cells. Furthermore, a scalable and cost-effective capture purification step was developed based on a diethylaminoethyl monolithic column capable of removing most of the baculoviruses from the LV pool with 65% recovery.

Simultaneous dual-functioning InGaN/GaN multiple-quantum-well diode for transferrable optoelectronics

NASA Astrophysics Data System (ADS)

Shi, Zheng; Yuan, Jialei; Zhang, Shuai; Liu, Yuhuai; Wang, Yongjin

2017-10-01

We propose a wafer-level procedure for the fabrication of 1.5-mm-diameter dual functioning InGaN/GaN multiple-quantum-well (MQW) diodes on a GaN-on-silicon platform for transferrable optoelectronics. Nitride semiconductor materials are grown on (111) silicon substrates with intermediate Al-composition step-graded buffer layers, and membrane-type MQW-diode architectures are obtained by a combination of silicon removal and III-nitride film backside thinning. Suspended MQW-diodes are directly transferred from silicon to foreign substrates such as metal, glass and polyethylene terephthalate by mechanically breaking the support beams. The transferred MQW-diodes display strong electroluminescence under current injection and photodetection under light irradiation. Interestingly, they demonstrate a simultaneous light-emitting light-detecting function, endowing the 1.5-mm-diameter MQW-diode with the capability of producing transferrable optoelectronics for adjustable displays, wearable optical sensors, multifunctional energy harvesting, flexible light communication and monolithic photonic circuit.

New functionally dioecious bush tomato from northwestern Australia, Solanum ossicruentum, may utilize “trample burr” dispersal

PubMed Central

Martine, Christopher T.; Cantley, Jason T.; Frawley, Emma S.; Butler, Alice R.; Jordon-Thaden, Ingrid E.

2016-01-01

Abstract A new Australian species of functionally dioecious bush tomato of Solanum subgenus Leptostemonum is described. Solanum ossicruentum Martine & J.Cantley, sp. nov., is thought to be allied with members of the problematic “Dioicum Complex” lineage, but differs in its short silvery indumentum, long calyx lobes, larger stature, and an unusual fruit morphology that may represent “trample burr” seed dispersal. The species occurs in a range extending from the eastern Kimberley in Western Australia to far northwestern Northern Territory and has been recognized for decades as a variant of Solanum dioicum W.Fitzg. Specimens of this species were previously referred to by D.E. Symon and others as Solanum dioicum ‘Tanami.’ Ex situ crossing studies and SEM images of inaperturate pollen grains produced in morphologically hermaphrodite flowers indicate that this taxon is functionally dioecious. The scientific name was chosen with the help of 150 seventh grade life science students from Pennsylvania, USA. PMID:27489475

Acquisition of flat panel displays for military applications

NASA Astrophysics Data System (ADS)

Van Atta, Richard H.; Goodell, Larry; Cohen, Brian S.; Lippitz, Michael J.; Marks, Michael B.; Bardsley, James N.; Kimzey, Charles H.

1998-09-01

Congress requested the Department of Defense (DoD) to study the acquisition of flat panel displays (FPDs) for military applications with specific attention to tradeoffs made in acquiring 'consumer-grade displays' rather than 'FPD systems that are custom designed to meet military requirements.' The study addresses: life cycle cost and performance tradeoffs, environmental and performance requirements and test data on performance of both custom and consumer-grade FPDs, life cycle cost and support issues such as commonality, supportability, and availability, potential benefits of FPD system interface standards and open systems approaches. The study found that appropriately ruggedized consumer-grade FPDs can meet the environmental and performance requirements for a broad range of military applications, including shipboard, command and control, army ground vehicles, military transport aviation, and soldier-portable computer systems. Currently, ruggedized consumer-grade FPDs cannot meet the specifications for some highly stressful applications, particularly tactical cockpit avionics. Due to lack of comparable and available data, programs have reached different judgments about the environmental tolerance and optical performance of ruggedized consumer-grade FPDs. There appear to be few systematic assessments of display performance impact on mission effectiveness. FPD availability concerns pivot on (1) the potentially rapid obsolescence of commercial FPDs and (2) the economic viability of domestic custom FPD suppliers. Display integrators using commercial FPDs are working to establish long-term supply arrangements with foreign producers of displays, but it is unclear how responsive these relationships will be in the future. Some DoD display integrators using custom FPDs believe that until the FPD market matures and stabilizes, it would be imprudent for DoD to become dependent on foreign, commercial FPD producers. However, many of these integrators are also concerned about the financial health of domestically based custom FPD producers.

Dual Laser-Assisted Lamellar Anterior Keratoplasty with Tophat Graft: A Laboratory Study

PubMed Central

Cleary, Catherine; Song, Jonathan C.; Tang, Maolong; Li, Yan; Liu, Ying; Yiu, Samuel; Huang, David

2011-01-01

Objectives To develop a dual laser-assisted lamellar anterior keratoplasty (LALAK) technique, using excimer and femtosecond lasers to perform surgery on eye-bank eyes. Methods First we compared corneal stromal surfaces produced by (1) deep excimer ablation, (2) femtosecond lamellar cuts, and (3) manual dissection, and evaluated the effect of excimer laser smoothing with fluid masking on each surface. Masked observers graded scanning electron microscopy (SEM) images on a 5-point roughness scale. Then we performed a 6-mm diameter excimer laser phototherapeutic keratectomy (PTK) ablation to a residual bed thickness of 200μm, followed by laser smoothing. We used the femtosecond laser to cut donors in a modified top-hat design with a thin tapered brim, which fitted into a manually dissected circumferential pocket at the base of the recipient bed. Fourier-domain optical coherence tomography (OCT) was used to measure corneal pachymetry and evaluate graft fit. Results Deep excimer ablation with smoothing (n=4) produced a significantly (p<0.05) smoother surface (grade=3.5) than deep excimer alone (n=4, grade=3.8) or manual dissection with (n=1, grade=3.8) and without smoothing (n=1, grade=4.8). Deep femtosecond cuts (n=2) produced macroscopic concentric ridges on the stromal surface. Experimental LALAK was performed on 4 recipients prepared by deep excimer ablation and 4 donors cut with the femtosecond laser. After suturing good peripheral graft-host match was observed on FD-OCT imaging. Conclusion These preliminary studies show that the LALAK technique permits improved interface smoothness and graft edge matching. Clinical trials are needed to determine whether these improvements can translate to better vision. PMID:22378114

Continuous-Flow System Produces Medical-Grade Water

NASA Technical Reports Server (NTRS)

Akse, James R.; Dahl, Roger W.; Wheeler, Richard R.

2009-01-01

A continuous-flow system utilizes microwave heating to sterilize water and to thermally inactivate endotoxins produced in the sterilization process. The system is designed for use in converting potable water to medical-grade water. Systems like this one could be used for efficient, small-scale production of medical- grade water in laboratories, clinics, and hospitals. This system could be adapted to use in selective sterilization of connections in ultra-pure-water-producing equipment and other equipment into which intrusion by microorganisms cannot be tolerated. Lightweight, port - able systems based on the design of this system could be rapidly deployed to remote locations (e.g., military field hospitals) or in response to emergencies in which the normal infrastructure for providing medical-grade water is disrupted. Larger systems based on the design of this system could be useful for industrial production of medical-grade water. The basic microwave-heating principle of this system is the same as that of a microwave oven: An item to be heated, made of a lossy dielectric material (in this case, flowing water) is irradiated with microwaves in a multimode microwave cavity. The heating is rapid and efficient because it results from absorption of microwave power throughout the volume of the lossy dielectric material. In this system, a copper tube having a length of 49.5 cm and a diameter of 2.25 cm serves as both the microwave cavity and the sterilization chamber. Microwave power is fed via a coaxial cable to an antenna mounted inside the tube at mid-length (see figure). Efficient power transfer occurs due to the shift in wavelength associated with the high permittivity of water combined with the strong coupling of 2.45-GHz microwaves with rotational-vibrational transitions of the dipolar water molecule.

Inference of Low and High-Grade Glioma Gene Regulatory Networks Delineates the Role of Rnd3 in Establishing Multiple Hallmarks of Cancer

PubMed Central

Turan, Nil; Soulet, Fabienne; Mohd Zahari, Maihafizah; Ryan, Katie R.; Durant, Sarah; He, Shan; Herbert, John; Ankers, John; Heath, John K.; Bjerkvig, Rolf; Bicknell, Roy; Hotchin, Neil A.; Bikfalvi, Andreas; Falciani, Francesco

2015-01-01

Gliomas are a highly heterogeneous group of brain tumours that are refractory to treatment, highly invasive and pro-angiogenic. Glioblastoma patients have an average survival time of less than 15 months. Understanding the molecular basis of different grades of glioma, from well differentiated, low-grade tumours to high-grade tumours, is a key step in defining new therapeutic targets. Here we use a data-driven approach to learn the structure of gene regulatory networks from observational data and use the resulting models to formulate hypothesis on the molecular determinants of glioma stage. Remarkably, integration of available knowledge with functional genomics datasets representing clinical and pre-clinical studies reveals important properties within the regulatory circuits controlling low and high-grade glioma. Our analyses first show that low and high-grade gliomas are characterised by a switch in activity of two subsets of Rho GTPases. The first one is involved in maintaining normal glial cell function, while the second is linked to the establishment of multiple hallmarks of cancer. Next, the development and application of a novel data integration methodology reveals novel functions of RND3 in controlling glioma cell migration, invasion, proliferation, angiogenesis and clinical outcome. PMID:26132659

Effect of Grade I and II Intraventricular Hemorrhage on Visuocortical Function in Very Low Birth Weight Infants

PubMed Central

Madan, Ashima; Norcia, Anthony M.; Hou, Chuan; Pettet, Mark W.; Good, William V.

2015-01-01

The neurological outcome for infants with Grade I/II intraventricular hemorrhage (IVH) is debated. The aim of this study was to determine whether very low birth weight infants (VLBW, < 1500 g) with Grade I /II (IVH) have altered visuocortical activity compared with infants with no IVH. We assessed the quantitative swept parameter Visual Evoked Potential (sVEP) responses evoked by three different visual stimuli. Data from 52 VLBW infants were compared with data from 13 infants with Grade I or II IVH, enrolled at 5 – 7 months corrected age. Acuity thresholds and suprathreshold response amplitudes were compared. Grating Acuity (GA), Contrast Sensitivity (CS) and Vernier Acuity (VA) were each worse in the Grade I/ II IVH compared with the no IVH groups (8.24 cpd in IVH group vs 13.07 cpd in no IVH group for GA; 1.44% vs 1.18% for CS and 1.55 arcmin vs 0.58 arcmin for VA). The slopes of the response amplitude for CS and VA were significantly lower in IVH infants. The spatial frequency tuning function was shifted downward on the spatial frequency axis, without a change in slope. These results indicate that Grade I/II IVH are associated with deleterious effects on cortical vision development and function. PMID:22371027

Neuropsychological outcome in patients with childhood craniopharyngioma and hypothalamic involvement.

PubMed

Özyurt, Jale; Thiel, Christiane M; Lorenzen, Anna; Gebhardt, Ursel; Calaminus, Gabriele; Warmuth-Metz, Monika; Müller, Hermann L

2014-04-01

To test memory performance and executive functions in patients with childhood craniopharyngioma and hypothalamic involvement. Using standardized neuropsychological tests, we compared cognitive performance in a group of 15 patients with childhood craniopharyngioma and known hypothalamic involvement and a group of 24 age- and intelligence-matched control subjects. In addition, we compared individual patients' results with normative data to detect abnormal performance in the clinically relevant range. Within the patient group, we further tested whether the grade of hypothalamic involvement had an impact on cognitive performance and quality of life. Relative to healthy controls, the patients demonstrated significantly lower performance scores in tests of memory and executive functioning. On the individual performance level, delayed recall performance was severely impaired in one-third of the patients. Compared with patients with low-grade hypothalamic involvement, those with high-grade hypothalamic involvement showed worse performance in executive functions and reduced functional capabilities for daily life actions, indicating lower quality of life. Our findings demonstrate that hypothalamic involvement is related to impairments in memory and executive functioning in patients with childhood craniopharyngioma and indicate that a high grade of hypothalamic involvement is related to worse outcomes. Copyright © 2014 Mosby, Inc. All rights reserved.

Endoscopic assessment of airway function as a predictor of racing performance in Thoroughbred yearlings: 427 cases (1997-2000).

PubMed

Stick, J A; Peloso, J G; Morehead, J P; Lloyd, J; Eberhart, S; Padungtod, P; Derksen, F J

2001-10-01

To compare endoscopic findings of the upper portion of the respiratory tract in Thoroughbred yearlings with their subsequent race records to determine whether subjective assessment of airway function may be used as a predictor of future racing performance. Retrospective study. 427 Thoroughbred yearlings. Endoscopic examination findings were obtained from the medical records and the videoendoscopic repository of the Keeneland 1996 September yearling sales. Racing records were requested for the yearlings through the end of their 4-year-old racing season (1997-2000). Twenty-nine measures of racing performance were correlated with endoscopic findings. Subjective arytenoid cartilage movement grades were determined, using a 4-point grading scale (grade 1 = symmetrical synchronous abduction of the arytenoid cartilages; grade 4 = no substantial movement of the left arytenoid cartilage). Of the 427 Thoroughbred yearlings included in this study, 364 established race records, and 63 did not. Opinions regarding suitability for purchase, meeting conditions of the sale, and the presence of epiglottic abnormalities had no significant association with racing performance. Arytenoid cartilage movement grades were significantly associated with many of the dependent variables. However, palatine abnormalities were not predictive of inferior racing performance. Thoroughbred yearlings with grade-1 and -2 arytenoid cartilage movements had significantly better racing performance as adults, compared with yearlings with grade-3 arytenoid cartilage movements. In contrast, epiglottic and palatine abnormalities were not predictive of inferior racing performance. Therefore, evaluation of laryngeal function, but not epiglottic or palatine abnormalities, using the 4-point grading system, should be the major factor in developing recommendations for prospective buyers.

Nonlinear effects of hyperpolarizing shifts in activation of mutant Nav1.7 channels on resting membrane potential

PubMed Central

Estacion, Mark

2017-01-01

The Nav1.7 sodium channel is preferentially expressed within dorsal root ganglion (DRG) and sympathetic ganglion neurons. Gain-of-function mutations that cause the painful disorder inherited erythromelalgia (IEM) shift channel activation in a hyperpolarizing direction. When expressed within DRG neurons, these mutations produce a depolarization of resting membrane potential (RMP). The biophysical basis for the depolarized RMP has to date not been established. To explore the effect on RMP of the shift in activation associated with a prototypical IEM mutation (L858H), we used dynamic-clamp models that represent graded shifts that fractionate the effect of the mutation on activation voltage dependence. Dynamic-clamp recording from DRG neurons using a before-and-after protocol for each cell made it possible, even in the presence of cell-to-cell variation in starting RMP, to assess the effects of these graded mutant models. Our results demonstrate a nonlinear, progressively larger effect on RMP as the shift in activation voltage dependence becomes more hyperpolarized. The observed differences in RMP were predicted by the “late” current of each mutant model. Since the depolarization of RMP imposed by IEM mutant channels is known, in itself, to produce hyperexcitability of DRG neurons, the development of pharmacological agents that normalize or partially normalize activation voltage dependence of IEM mutant channels merits further study. NEW & NOTEWORTHY Inherited erythromelalgia (IEM), the first human pain disorder linked to a sodium channel, is widely regarded as a genetic model of neuropathic pain. IEM is produced by Nav1.7 mutations that hyperpolarize activation. These mutations produce a depolarization of resting membrane potential (RMP) in dorsal root ganglion neurons. Using dynamic clamp to explore the effect on RMP of the shift in activation, we demonstrate a nonlinear effect on RMP as the shift in activation voltage dependence becomes more hyperpolarized. PMID:28148645

Highly mobile ferroelastic domain walls in compositionally graded ferroelectric thin films

DOE PAGES

Damodaran, Anoop; Okatan, M. B.; Kacher, J.; ...

2016-02-15

Domains and domain walls are critical in determining the response of ferroelectrics, and the ability to controllably create, annihilate, or move domains is essential to enable a range of next-generation devices. Whereas electric-field control has been demonstrated for ferroelectric 180° domain walls, similar control of ferroelastic domains has not been achieved. Here, using controlled composition and strain gradients, we demonstrate deterministic control of ferroelastic domains that are rendered highly mobile in a controlled and reversible manner. Through a combination of thin-film growth, transmission-electron-microscopy-based nanobeam diffraction and nanoscale band-excitation switching spectroscopy, we show that strain gradients in compositionally graded PbZr 1-xTimore » xO 3 heterostructures stabilize needle-like ferroelastic domains that terminate inside the film. These needle-like domains are highly labile in the out-of-plane direction under applied electric fields, producing a locally enhanced piezoresponse. This work demonstrates the efficacy of novel modes of epitaxy in providing new modalities of domain engineering and potential for as-yet-unrealized nanoscale functional devices.« less

Highly mobile ferroelastic domain walls in compositionally graded ferroelectric thin films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Damodaran, Anoop; Okatan, M. B.; Kacher, J.

Domains and domain walls are critical in determining the response of ferroelectrics, and the ability to controllably create, annihilate, or move domains is essential to enable a range of next-generation devices. Whereas electric-field control has been demonstrated for ferroelectric 180° domain walls, similar control of ferroelastic domains has not been achieved. Here, using controlled composition and strain gradients, we demonstrate deterministic control of ferroelastic domains that are rendered highly mobile in a controlled and reversible manner. Through a combination of thin-film growth, transmission-electron-microscopy-based nanobeam diffraction and nanoscale band-excitation switching spectroscopy, we show that strain gradients in compositionally graded PbZr 1-xTimore » xO 3 heterostructures stabilize needle-like ferroelastic domains that terminate inside the film. These needle-like domains are highly labile in the out-of-plane direction under applied electric fields, producing a locally enhanced piezoresponse. This work demonstrates the efficacy of novel modes of epitaxy in providing new modalities of domain engineering and potential for as-yet-unrealized nanoscale functional devices.« less

Techno-economic assessment of a wood-based biorefinery concept for the production of polymer-grade ethylene, organosolv lignin and fuel.

PubMed

Nitzsche, Roy; Budzinski, Maik; Gröngröft, Arne

2016-01-01

Lignocellulose biorefineries are distinguished by an explicitly integrative, multi-functional concept that transforms biomass into multiple products, using a variety of conversion and separation processes. This study focuses on the technical design and economic evaluation of a lignocellulose biorefinery, that converts 400,000tDM/a (≙250MW) of beech wood into chemicals and fuel. A model was simulated with Aspen Plus® including the process steps pre-treatment, enzymatic hydrolysis, alcoholic fermentation, dehydration and biogas generation and upgrading. Mass and energy balances showed that 61,600t/a polymer-grade ethylene, 58,520tDM/a organosolv lignin, 38,400t/a biomethane and 90,800tDM/a hydrolysis lignin can be produced with a total energy efficiency of 87.1%. A discounted cash flow analysis indicated that the heat integrated biorefinery concept is not yet profitable. However, the economic results are greatly sensitive regarding various assumptions, in particular in terms of the prices for beech wood, ethylene and organosolv lignin. Copyright © 2015 Elsevier Ltd. All rights reserved.

Graded Encoding of Food Odor Value in the Drosophila Brain

PubMed Central

Beshel, Jennifer

2013-01-01

Odors are highly evocative, yet how and where in the brain odors derive meaning remains unknown. Our analysis of the Drosophila brain extends the role of a small number of hunger-sensing neurons to include food-odor value representation. In vivo two-photon calcium imaging shows the amplitude of food odor-evoked activity in neurons expressing Drosophila neuropeptide F (dNPF), the neuropeptide Y homolog, strongly correlates with food-odor attractiveness. Hunger elevates neural and behavioral responses to food odors only, although food odors that elicit attraction in the fed state also evoke heightened dNPF activity in fed flies. Inactivation of a subset of dNPF-expressing neurons or silencing dNPF receptors abolishes food-odor attractiveness, whereas genetically enhanced dNPF activity not only increases food-odor attractiveness but promotes attraction to aversive odors. Varying the amount of presented odor produces matching graded neural and behavioral curves, which can function to predict preference between odors. We thus demonstrate a possible motivationally scaled neural “value signal” accessible from uniquely identifiable cells. PMID:24089477

[Categorization of uterine cervix tumors : What's new in the 2014 WHO classification].

PubMed

Lax, S F; Horn, L-C; Löning, T

2016-11-01

In the 2014 WHO classification, squamous cell precursor lesions are classified as low-grade and high-grade intraepithelial lesions. LSIL corresponds to CIN1, HSIL includes CIN2 and CIN3. Only adenocarcinoma in situ (AIS) is accepted as precursor of adenocarcinoma and includes the stratified mucin-producing intraepithelial lesion (SMILE). Although relatively rare, adenocarcinoma and squamous cell carcinoma can be mixed with a poorly differentiated neuroendocrine carcinoma. Most cervical adenocarcinomas are low grade and of endocervical type. Mucinous carcinomas show marked intra- and extracellular mucin production. Almost all squamous cell carcinomas, the vast majority of adenocarcinomas, and many rare carcinoma types are HPV related. For low grade endocervical adenocarcinomas, the pattern-based classification according to Silva should be reported. Neuroendocrine tumors are rare and are classified into low-grade and high-grade, whereby the term carcinoid is still used.

Mothers' Depressive Symptoms and Children's Cognitive and Social Agency: Predicting First-Grade Cognitive Functioning

ERIC Educational Resources Information Center

Yan, Ni; Dix, Theodore

2016-01-01

Using data from the National Institute of Child Health and Human Development (NICHD) Study of Early Child Care and Youth Development (N = 1,364), the present study supports an agentic perspective; it demonstrates that mothers' depressive symptoms in infancy predict children's poor first-grade cognitive functioning because depressive symptoms…

An Authentic Task That Models Quadratics

ERIC Educational Resources Information Center

Baron, Lorraine M.

2015-01-01

As students develop algebraic reasoning in grades 5 to 9, they learn to recognize patterns and understand expressions, equations, and variables. Linear functions are a focus in eighth-grade mathematics, and by algebra 1, students must make sense of functions that are not linear. This article describes how students worked through a classroom task…

Exploring the Functions of Reading: A Cross-Cultural Perspective.

ERIC Educational Resources Information Center

Greaney, Vincent; Neuman, Susan B.

To determine if purposes in reading differ with sex, grade level, and nationality, a 16-item "Functions of Reading Scale" (developed from content analysis of student essays on why they like to read) was administered to 459 Irish (Dublin, Ireland) and American (Windham, Connecticut) students in grades three, five, and eight. Data…

Kindergarten Children's Executive Functions Predict Their Second-Grade Academic Achievement and Behavior

ERIC Educational Resources Information Center

Morgan, Paul L.; Farkas, George; Hillemeier, Marianne M.; Pun, Wik Hung; Maczuga, Steve

2018-01-01

Whether and to what extent kindergarten children's executive functions (EF) constitute promising targets of early intervention is currently unclear. This study examined whether kindergarten children's EF predicted their second-grade academic achievement and behavior. This was done using (a) a longitudinal and nationally representative sample (N =…

Looking Forward to High School and College: Middle Grade Indicators of Readiness in Chicago Public Schools

ERIC Educational Resources Information Center

Allensworth, Elaine M.; Gwynne, Julia A.; Moore, Paul; de la Torre, Marisa

2014-01-01

There is a very large population of students who struggle with the transition from the middle grades to high school, raising concerns that high school failures are partially a function of poor middle grade preparation. As a result, middle grade practitioners are grappling with questions about what skills students need to succeed in high school,…

Axial postbuckling analysis of multilayer functionally graded composite nanoplates reinforced with GPLs based on nonlocal strain gradient theory

NASA Astrophysics Data System (ADS)

Sahmani, S.; Aghdam, M. M.

2017-11-01

In this paper, a new size-dependent inhomogeneous plate model is constructed to analyze the nonlinear buckling and postbuckling characteristics of multilayer functionally graded composite nanoplates reinforced with graphene platelet (GPL) nanofillers under axial compressive load. To this purpose, the nonlocal strain gradient theory of elasticity is implemented into a refined hyperbolic shear deformation plate theory. The mechanical properties of multilayer graphene platelet-reinforced composite (GPLRC) nanoplates are evaluated based upon the Halpin-Tsai micromechanical scheme. The weight fraction of randomly dispersed GPLs remain constant in each individual layer, which results in U-GPLRC nanoplate, or changes layerwise in accordance with three different functionally graded patterns, which make X-GPLRC, O-GPLRC and A-GPLRC nanoplates. Via a two-stepped perturbation technique, explicit analytical expressions for nonlocal strain gradient stability paths are established for layerwise functionally graded GPLRC nanoplates. It is demonstrated that both the nonlocal and strain gradient size dependencies are more significant for multilayer GPLRC nanoplates filling by GPL nanofillers with higher length-to-thickness and width-to-thickness ratios.

Investigation of free vibration analysis of functionally graded annular piezoelectric plate using COMSOL

NASA Astrophysics Data System (ADS)

Sharma, Trivendra Kumar; Parashar, Sandeep Kumar

2018-05-01

In the present age functionally graded piezoelectric materials (FGPM) are increasingly being used as actuators and sensors. In spite of the fact that the piezoelectric coupling coefficient for shear d15 has much higher value in comparison to d31 or d33, it is far less utilized for the applications due to complex nature of the shear induced vibrations. In this work three dimensional free vibration analysis of functionally graded piezoelectric material annular plates with free-free boundary conditions is presented. The annular FGPM plate is polarized along the radial direction while the electric field is applied along the thickness direction inducing flexural vibrations of the plate due to d15 effect of functionally graded piezoelectric materials. The material properties are assumed to have a power law variation along the thickness. COMSOL Multiphysics is used to obtain the natural frequencies and modeshapes. Detailed numerical study is performed to ascertain the effect of variation in power law index and various geometrical parameters. The results presented shall be helpful in optimizing the existing applications and developing the new ones utilizing the FGPM annular plates.

HOTCFGM-1D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Through-Thickness Functionally Graded Microstructures

NASA Technical Reports Server (NTRS)

Pindera, Marek-Jerzy; Aboudi, Jacob

1998-01-01

The objective of this three-year project was to develop and deliver to NASA Lewis one-dimensional and two-dimensional higher-order theories, and related computer codes, for the analysis, optimization and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, blisk blades). To satisfy this objective, a quasi one-dimensional version of the higher-order theory, HOTCFGM-1D, and four computer codes based on this theory, for the analysis, design and optimization of cylindrical structural components functionally graded in the radial direction were developed. The theory is applicable to thin multi-phased composite shell/cylinders subjected to macroscopically axisymmetric thermomechanical and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial and circumferential directions, and arbitrarily distributed in the radial direction, thereby allowing functional grading of the internal reinforcement in this direction.

Elementary Writing Assessment Platforms: A Quantitative Examination of Online versus Offline Writing Performance of Fifth-Grade Students

ERIC Educational Resources Information Center

Heath, Vickie L.

2013-01-01

This quantitative study explored if significant differences exist between how fifth-grade students produce a written response to a narrative prompt using online versus offline writing platforms. The cultural and social trend of instructional and assessment writing paradigms in education is shifting to online writing platforms (National Assessment…

Influence of edging practices on cutting yields of Alaska birch lumber

Treesearch

David L. Nicholls; J.W. Funck; C.C. Brunner; J.E. Reeb

2009-01-01

Birch lumber is often characterized by a high degree of knots, bark pockets, heartwood, and other features which force sawmill owners to decide whether to edge and trim boards to produce standard grade lumber vs. proprietary grade character-marked lumber. In addition, the edging strategies used with irregularly shaped flitches can greatly influence cut-stock recovery....

Addressing the Effects of Reciprocal Teaching on the Receptive and Expressive Vocabulary of 1st-Grade Students

ERIC Educational Resources Information Center

Mandel, Eliana; Osana, Helena P.; Venkatesh, Vivek

2013-01-01

This study evaluated the effects of Adapted Reciprocal Teaching (ART) on the receptive and expressive flight-word vocabulary of 1st-grade students. During ART, classroom interactions produced narrative contexts within which students assumed responsibility for applying new flight words in personally meaningful ways. Students in the control group…

Examining Reliability of Reading Comprehension Ratings of Fifth Grade Students' Oral Retellings

ERIC Educational Resources Information Center

Bernfeld, L. Elizabeth Shirley; Morrison, Timothy G.; Sudweeks, Richard R.; Wilcox, Brad

2013-01-01

The purpose of this study was to rate oral retellings of fifth graders to determine how passages, raters, and rating occasions affect those ratings, and to identify what combination of those elements produce reliable retelling ratings. A group of 36 fifth grade students read and orally retold three contemporary realistic fiction passages. Two…

Clearwood quality and softwood lumber prices: what's the real premium?

Treesearch

Thomas R. Waggener; Roger D. Fight

1999-01-01

Diminishing quantities of appearance grade lumber and rising price premiums for it have accompanied the transition from old-growth to young-growth timber. The price premiums for better grades are an incentive for producers to undertake investments to increase the yield of those higher valued products. Price premiums, however, are also an incentive for users to...

Enabling Teachers to Explore Grade Patterns to Identify Individual Needs and Promote Fairer Student Assessment

ERIC Educational Resources Information Center

Friedler, Sorelle A.; Tan, Yee Lin; Peer, Nir J.; Shneiderman, Ben

2008-01-01

Exploring student test, homework, and other assessment scores is a challenge for most teachers, especially when attempting to identify cross-assessment weaknesses and produce final course grades. During the course, teachers need to identify subject weaknesses in order to help students who are struggling with a particular topic. This identification…

Exploring Music Practice among Sixth-Grade Band and Orchestra Students

ERIC Educational Resources Information Center

Austin, James R.; Berg, Margaret Haefner

2006-01-01

The purpose of this study was to describe the practice motivation and regulation of sixth-grade instrumentalists (11-12 years of age). A sample of 224 US band and orchestra students, representing 85 elementary schools, completed a 36-item practice inventory and produced two narratives depicting a typical practice session and a practice episode…

Some implications of remanufacturing hardwood lumber

Treesearch

Charles J. Gatchell; R. Edward Thomas; Elizabeth S. Walker

2000-01-01

Research on several hundred well-manufactured 1 and 2A Common red oak boards shows that better edging and/or trimming or division-based remanufacturing can produce boards of higher grade and value. Division-based remanufacturing divides a board into as many as four smaller boards. The UGRS computer program (3,4) grades digitized boards, examines their remanufacturing...

Tales from Grades 1 through 12: Understanding the Complex Web of Multiple Life Forces Located in Schools

ERIC Educational Resources Information Center

Dieser, Rodney B.

2008-01-01

This study is a qualitative autoethnographical narrative of my grades 1 through 12 experiences in a Catholic school system in Alberta. Autoethnographical research interprets a culture by producing highly personalized and revealing texts; it examines social phenomena holistically and underscores how social histories influence identity development.…

Is seedling grading beneficial to artificial regeneration of northern red oaks?

Treesearch

Paul P. Kormanik; Shi-Jean S. Sung; Stanley J. Zarnoch

2005-01-01

Effective and consistent success with artificial regeneration of northern red oak (Quercus rubra L.) has been achieved on many sites using 1-0 graded seedlings produced with the nursery protocol developed by the USDA Forest Service at the Institute of Tree Root Biology in cooperation with the Georgia Forestry Commission. Small northern red oak (NRO)...

Concept Mapping: Effects on Content Knowledge and Engagement with Content in Elementary Students' Persuasive Writing

ERIC Educational Resources Information Center

Gardner, Melissa England

2015-01-01

This comparative pre-test/post-test quantitative study investigated the effect of an instructional strategy using concept mapping as a graphic organizer on the quality of persuasive writing compositions produced by fourth grade elementary school students. Six fourth grade classes were assigned as intact groups to three conditions: concept mapping…

Student Estimates of Public Speaking Competency: The Meaning Extraction Helper and Video Self-Evaluation

ERIC Educational Resources Information Center

LeFebvre, Luke; LeFebvre, Leah; Blackburn, Kate; Boyd, Ryan

2015-01-01

Video continues to be used in many basic communication courses as a way for students to self-evaluate speechmaking. In this study, students (N = 71) presented speeches, viewed the video recordings, and produced self-generated feedback. Comparing student's self-estimated grades from the self-evaluation against earned grades resulted in composite…

Chickscope Realized: A Situated Evaluation of a Sixth-Grade Classroom.

ERIC Educational Resources Information Center

Hogan, Maureen P.

2000-01-01

This is a case study of two sixth-grade teachers from Illinois who participated in a semester-long inservice to learn about Chickscope, a supercomputing application that allows students and teachers remote access to magnetic resonance images of chicken embryos. Shows how they produced an inquiry-based unit on chicken weight and measurement.…

OPTIGRAMI V2 user's guide

Treesearch

Penny S. Lawson; R. Edward Thomas; Elizabeth S Walker

1996-01-01

OPTIGRAMI V2 is a computer program available for IBM persaonl computer with 80286 and higher processors. OPTIGRAMI V2 determines the least-cost lumber grade mix required to produce a given cutting order for clear parts from rough lumber of known grades in a crosscut-first rough mill operation. It is a user-friendly integrated application that includes optimization...

Grade Point Average: What's Wrong and What's the Alternative?

ERIC Educational Resources Information Center

Soh, Kay Cheng

2011-01-01

Grade point average (GPA) has been around for more than two centuries. However, it has created a lot of confusion, frustration, and anxiety to GPA-producers and users alike, especially when used across-nation for different purposes. This paper looks into the reasons for such a state of affairs from the perspective of educational measurement. It…

Music: Guide to Classroom Use in Intermediate Grades.

ERIC Educational Resources Information Center

WETA - TV, Washington, DC.

This field-tested guide is intended to help 4th, 5th, and 6th grade teachers introduce students to different musical concepts through a series of ten 30 minute television programs. Produced by WETA-TV, Washington D.C., the fast paced, humorous programs expose students to many musical styles including vocal and instrumental jazz, bluegrass and pop,…

"No Easy Road to Freedom": Critical Literacy in a Fourth-Grade Classroom.

ERIC Educational Resources Information Center

Sweeney, Maria

1997-01-01

Illustrates the possibilities of critical literacy by discussing a project a class of fourth-grade students undertook to write and produce a play about the conditions of apartheid, the history of resistance, and the upcoming South African elections. Concludes that students felt empowered as social activists and believed they had a mandate and the…

Investigating Grade Nine Textbook Problems for Characteristics Related to Mathematical Literacy

ERIC Educational Resources Information Center

Gatabi, Abolfazl Rafiepour; Stacey, Kaye; Gooya, Zahra

2012-01-01

This study presents a content analysis of the new Iranian Grade 9 mathematics textbook and two Australian Year 9 mathematics textbooks, examining the extent to which the problems show characteristics associated in the literature with promoting mathematical literacy. The new Iranian book was produced to meet a range of needs including several well…

First Year Evaluation of the Mathematics Pilot Programs, Grades K-8, [and] Appendices. Evaluation Department Report No. 381.

ERIC Educational Resources Information Center

Tomblin, Elizabeth A.; And Others

The San Diego Board of Education requested that pilot programs be conducted with commercially developed (Grades K-8) mathematics textbooks and programs in order to determine which of the programs/texts were superior, and whether a district-developed program could successfully compete with commercially produced materials. The pilot program…

Saxon Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2004

2004-01-01

"Saxon Math" focuses on fundamental mathematics skills, targeting children from kindergarten through grade 12. This report focuses on middle school math, defined as grades 6 through 9. The 6th grade curriculum covers simplifying expressions containing parentheses, graphing functions, and understanding ratios and proportions. The 7th grade…

Controlling the judge variable in grading essay-type items: an application of Rasch analyses to the recruitment exam for Korean public school teachers.

PubMed

Chae, S

1998-01-01

The purpose of this paper is to show how the Rasch measurement model can be used to control the effects of judge variable on the grading of essay-type items in the recruitment test for Korean teachers. Special attention is given to two aspects of judges' involvement in the grading. One is to identify a way to minimize the variation of grading due to judge severity. The other concern is to figure out a way to reduce the number of judges without threatening objectivity of ability estimates. Results from the FACETS analyses tell us not only how much grading standards vary among judges and how to adjust them but also it produces comparably reliable ability estimates with fewer judges.

Production and Performance of the InFOCmicronS 20-40 keV Graded Multilayer Mirror

NASA Technical Reports Server (NTRS)

Berendse, F.; Owens, S. M.; Serlemitsos, P. J.; Tueller, J.; Chan, K.-W.; Soong, Y.; Krimm, H.; Baumgartner, W. H.; Tamura, K.; Okajima, T.;

[Taphonomy of the gastropod cf. Donaldina robusta (Heterobranchia: Streptacididae) from the Middle Pennsylvanian, La Joya Formation, Sonora, Mexico].

PubMed

Gómez E, Catalina; Buitrón S, Blanca; Vachard, Daniel

2010-03-01

Gastropods are an important component in most of the fossil record; however, investigations have focused mainly on the characterization of the tafofacies and signatures in determined environments. We present qualitative and quantitative taphonomic data for the gastropod cf. Donaldina robusta assemblages from the La Joya Formation of the Sierra Agua Verde, Sonora State, (NW) Mexico. We analyzed 176 shells. Good preservation received ahigh taphonomic grade (A) and poor preservation a D. The shells were complete in 72% of cases (taphonomic grade B). Less than 10% are corroded or are parallel to the layer (grade A). This rock is petrographycally classified as wackestone, sedimentologically it is characterized by middle sorting (grade B) and low grading (grade A). The fossiliferous assemblage grades as A and B. Biostratinomic features of the skeletal assemblage are characteristic of sedimentologic concentrations of autochthonous-parautochthonous elements at the accumulation site. There was minimal reworking and transport in an environment of low energy, locally produced during a short period of accumulation.

[Botulin toxin as treatment for spasticity and dystonia in infantile cerebral paralysis].

PubMed

Aguilar-Rebolledo, F; Hernández-Sánchez, J; Rayo-Mares, D; Soriano-Fonseca, F; García-Muñoz, L; Ruiz-Ponce, J; Garrido-Ramírez, E

2001-01-01

Treatment of spasticity and dystonía in PCI with Botulinum toxin A. Botulinum-A (NxTxBoA) toxin produce neuromuscular blockade, it has been effective with therapeutic purposes in strabismus, focal dystonias and spasticity. Evaluate the therapeutically effects off NxTxBoA in cerebral palsy (CP) spastic and/or dystonic in children. Prospective study. 12 CP patients (8 spastic and 4 spastic/dystonic) were treated with NxTxBoA in affected muscles at least for 2 doses by up 12 months. The indication was: improve limb function, to avoid surgical correction or improve hygienic or dressing. Ashworth Spasticity Scale (ASS), functional scale for Dystonic Sindou-Millet (SMS) and O'Brien Global Assessment Scale (OGAS) were used to evaluate improvement. No parametric tests, Wilcoxon's rang's test and sign test were used with p < 0.05. Total doses session was 3-10 U/kg. AAS showed muscle spasticity improvement in two grades in 8 patients, and one grade in the rest (p = 0.004). SMS showed the muscle dystonic improve up 60% in two patients improve 50% in others (p = 0.006). OGAS demonstrated a good correlation. Mean treatment effect during 4.8 months (rank 4 to 10 m). Two patients had side effects, general weakness, instability, and focal haematoma. Botulinum toxin type A proved a highly useful adjuvant therapy and conservative management in CP.

Functional graded fullerene derivatives for improving the fill factor and device stability of inverted-type perovskite solar cells.

PubMed

Chiu, Kuo Yuan; Chang, Sheng Hsiung; Huang, Wei-Chen; Cheng, Hsin-Ming; Shaw, Hsin; Yeh, Shih-Chieh; Chen, Chin-Ti; Su, Yuhlong Oliver; Chen, Sheng-Hui; Wu, Chun-Guey

2018-07-27

A graded fullerene derivative thin film was used as a dual-functional electron transport layer (ETL) in CH 3 NH 3 PbI 3 (MAPbI 3 ) solar cells, to improve the fill factor (FF) and device stability. The graded ETL was made by mixing phenyl-C 61 -butyric acid methyl ester (PCBM) molecules and C 60 -diphenylmethanofullerene-oligoether (C 60 -DPM-OE) molecules using the spin-coating method. The formation of the graded ETLs can be due to the phase separation between hydrophobic PCBM and hydrophilic C 60 -DPM-OE, which was confirmed by XPS depth-profile analysis and an electron energy-loss spectroscope. Comprehensive studies were carried out to explore the characteristics of the graded ETLs in MAPbI 3 solar cells, including the surface properties, electronic energy levels, molecular packing properties and energy transfer dynamics. The elimination of the s-shape in the current density-voltage curves results in an increase in the FF, which originates from the smooth contact between the C 60 -DPM-OE and hydrophilic MAPbI 3 and the formation of the more ordered ETL. There was an improvement in device stability mainly due to the decrease in the photothermal induced morphology change of the graded ETLs fabricated from two fullerene derivatives with distinct hydrophilicity. Consequently, such a graded ETL provides dual-functional capabilities for the realization of stable high-performance MAPbI 3 solar cells.

Functional graded fullerene derivatives for improving the fill factor and device stability of inverted-type perovskite solar cells

NASA Astrophysics Data System (ADS)

Chiu, Kuo Yuan; Hsiung Chang, Sheng; Huang, Wei-Chen; Cheng, Hsin-Ming; Shaw, Hsin; Yeh, Shih-Chieh; Chen, Chin-Ti; Su, Yuhlong Oliver; Chen, Sheng-Hui; Wu, Chun-Guey

2018-07-01

A graded fullerene derivative thin film was used as a dual-functional electron transport layer (ETL) in CH3NH3PbI3 (MAPbI3) solar cells, to improve the fill factor (FF) and device stability. The graded ETL was made by mixing phenyl-C61-butyric acid methyl ester (PCBM) molecules and C60-diphenylmethanofullerene-oligoether (C60-DPM-OE) molecules using the spin-coating method. The formation of the graded ETLs can be due to the phase separation between hydrophobic PCBM and hydrophilic C60-DPM-OE, which was confirmed by XPS depth-profile analysis and an electron energy-loss spectroscope. Comprehensive studies were carried out to explore the characteristics of the graded ETLs in MAPbI3 solar cells, including the surface properties, electronic energy levels, molecular packing properties and energy transfer dynamics. The elimination of the s-shape in the current density–voltage curves results in an increase in the FF, which originates from the smooth contact between the C60-DPM-OE and hydrophilic MAPbI3 and the formation of the more ordered ETL. There was an improvement in device stability mainly due to the decrease in the photothermal induced morphology change of the graded ETLs fabricated from two fullerene derivatives with distinct hydrophilicity. Consequently, such a graded ETL provides dual-functional capabilities for the realization of stable high-performance MAPbI3 solar cells.

[Apoplectic macroadenomas: the outcome of the residual pituitary gland].

PubMed

Marouf, R; Mohr, G; Assimakopoulos, P; Glikstein, R

2010-08-01

The purpose of this retrospective study was to assess the MRI aspects and the function of the residual pituitary gland (RPG) after surgical decompression of an apoplectic pituitary macroadenoma, and to attempt to answer the question of whether an intra-adenomatous apoplexy necessarily leads to hypophyseal apoplexy. Between 1992 and 2008, 150 pituitary macroadenomas were surgically treated via the trans-sphenoidal approach, 19 of which presented an apoplectic feature (13%). They were subdivided into three groups: pure hemorrhage, hemorrhagic infarction, and ischemic infarction. The imaging was studied after surgery to identify the RPG and establish a correlation with the endocrine status. After surgery five of 19 patients had normal adenohypophyseal function (27%), eight (42%) had panhypopituitarism, and six (31%) complete or partial corticotropic hypopituitarism. The RPG was identified on MRI in 13 patients (69%), four of them (31%) with normal adenohypophyseal function. The RPG was clearly identified intraoperatively in nine patients (47%), four of whom (44%) had normal adenohypophyseal function. One patient presented preoperative diabetes insipidus, which disappeared immediately after surgery, and two other patients developed postoperative diabetes insipidus: in one patient it quickly declined and in the other one it persisted, requiring replacement. According to the radiological classification of Hardy and Vezina modified by the Mohr (Mohr et Hardy, 1982) grade, the patients were subdivided up as follows: one grade II-0, four grade II-A, 11 grade II-B, two grade C, and one grade IV-B+D. The repercussions of adenomatous apoplexy on the RPG is significant: only 27% of the patients retained normal pituitary function. Furthermore, although the RPG was identified on the MRI in more than two-thirds of the cases, more than half had adenohypophyseal failure: therefore, the visualization of a RPG does not mean that its functions are preserved. The involvement of the neurohypophysis is much rarer: one patient of 19 (5%). The implications of the ischemic or compressive damage on the normal pituitary gland are discussed. Copyright (c) 2009 Elsevier Masson SAS. All rights reserved.

Research and development of intelligent controller for high-grade sanitary ware

NASA Astrophysics Data System (ADS)

Bao, Kongjun; Shen, Qingping

2013-03-01

With the social and economic development and people's living standards improve, more and more emphasis on modern society, people improve the quality of family life, the use of intelligent controller applications in high-grade sanitary ware physiotherapy students. Analysis of high-grade sanitary ware physiotherapy common functions pointed out in the production and use of the possible risks, proposed implementation of the system hardware and matching, given the system software implementation process. High-grade sanitary ware physiotherapy intelligent controller not only to achieve elegant and beautiful, simple, physical therapy, water power, deodorant, multi-function, intelligent control, to meet the consumers, the high-end sanitary ware market, strong demand, Accelerate the enterprise product Upgrade and improve the competitiveness of enterprises.

Electrostatic Separator for Beneficiation of Lunar Soil

NASA Technical Reports Server (NTRS)

Quinn, Jacqueline; Arens, Ellen; Trigwell, Steve; Captain, James

2010-01-01

A charge separator has been constructed for use in a lunar environment that will allow for separation of minerals from lunar soil. In the present experiments, whole lunar dust as received was used. The approach taken here was that beneficiation of ores into an industrial feedstock grade may be more efficient. Refinement or enrichment of specific minerals in the soil before it is chemically processed may be more desirable as it would reduce the size and energy requirements necessary to produce the virgin material, and it may significantly reduce the process complexity. The principle is that minerals of different composition and work function will charge differently when tribocharged against different materials, and hence be separated in an electric field.

Optimization of Milling Parameters Employing Desirability Functions

NASA Astrophysics Data System (ADS)

Ribeiro, J. L. S.; Rubio, J. C. Campos; Abrão, A. M.

2011-01-01

The principal aim of this paper is to investigate the influence of tool material (one cermet and two coated carbide grades), cutting speed and feed rate on the machinability of hardened AISI H13 hot work steel, in order to identify the cutting conditions which lead to optimal performance. A multiple response optimization procedure based on tool life, surface roughness, milling forces and the machining time (required to produce a sample cavity) was employed. The results indicated that the TiCN-TiN coated carbide and cermet presented similar results concerning the global optimum values for cutting speed and feed rate per tooth, outperforming the TiN-TiCN-Al2O3 coated carbide tool.

An Investigation of the Generalizability of Medical School Grades.

PubMed

Kreiter, Clarence D; Ferguson, Kristi J

2016-01-01

Construct/Background: Medical school grades are currently unstandardized, and their level of reliability is unknown. This means their usefulness for reporting on student achievement is also not well documented. This study investigates grade reliability within 1 medical school. Generalizability analyses are conducted on grades awarded. Grades from didactic and clerkship-based courses were treated as 2 levels of a fixed facet within a univariate mixed model. Grades from within the 2 levels (didactic and clerkship) were also entered in a multivariate generalizability study. Grades from didactic courses were shown to produce a highly reliable mean score (G = .79) when averaged over as few as 5 courses. Although the universe score correlation between didactic and clerkship courses was high (r = .80), the clerkship courses required almost twice as many grades to reach a comparable level of reliability. When grades were converted to a Pass/Fail metric, almost all information contained in the grades was lost. Although it has been suggested that the imprecision of medical school grades precludes their use as a reliable indicator of student achievement, these results suggest otherwise. While it is true that a Pass/Fail system of grading provides very little information about a student's level of performance, a multi-tiered grading system was shown to be a highly reliable indicator of student achievement within the medical school. Although grades awarded during the first 2 didactic years appear to be more reliable than clerkship grades, both yield useful information about student performance within the medical college.

Treatment of post-traumatic elbow deformities in children with the Ilizarov distraction osteogenesis technique.

PubMed

Özkan, Cenk; Deveci, Mehmet Ali; Tekin, Mustafa; Biçer, Ömer Sunkar; Gökçe, Kadir; Gülşen, Mahir

2017-01-01

The present study assessed functional and radiographic outcomes of distraction osteogenesis treatment of post-traumatic elbow deformities in children. Eight children were treated between 2008 and 2013 for post-traumatic elbow deformities using distraction osteogenesis. Mean age at time of operation was 10.9 years. Six patients had varus and 2 had valgus deformity. Magnitude of correction, fixator index, complications, carrying angle, and elbow range of motion were assessed. Functional results were graded according to protocol of Bellemore et al. Mean follow-up was 43 months. Mean preoperative varus deformity in 6 patients was 29.2° and valgus deformity in 2 patients was 28.5°. Preoperative flexion and extension of elbow were 123.8° and -10.6°, respectively. Mean carrying angle was 9° valgus at last follow-up. Mean flexion and extension were 134.4° and -6.0°, respectively. Change in carrying angle was statistically significant (p = 0.002). There were 2 grade 1 pin tract infections and 1 diaphyseal fracture of humerus. Functional outcome was rated excellent in 7 patients and good in 1 patient. Ilizarov distraction osteogenesis is a valuable alternative in treatment of elbow deformities in children. The surgical technique is simple and correction is adjustable. Gradual correction prevents possible neurovascular complications and minimally invasive surgery produces less scarring. Compliance of patient and family is key factor in the success of the outcome. Level IV, therapeutic study. Copyright © 2016 Turkish Association of Orthopaedics and Traumatology. Production and hosting by Elsevier B.V. All rights reserved.

Outcome of different facial nerve reconstruction techniques.

PubMed

Mohamed, Aboshanif; Omi, Eigo; Honda, Kohei; Suzuki, Shinsuke; Ishikawa, Kazuo

There is no technique of facial nerve reconstruction that guarantees facial function recovery up to grade III. To evaluate the efficacy and safety of different facial nerve reconstruction techniques. Facial nerve reconstruction was performed in 22 patients (facial nerve interpositional graft in 11 patients and hypoglossal-facial nerve transfer in another 11 patients). All patients had facial function House-Brackmann (HB) grade VI, either caused by trauma or after resection of a tumor. All patients were submitted to a primary nerve reconstruction except 7 patients, where late reconstruction was performed two weeks to four months after the initial surgery. The follow-up period was at least two years. For facial nerve interpositional graft technique, we achieved facial function HB grade III in eight patients and grade IV in three patients. Synkinesis was found in eight patients, and facial contracture with synkinesis was found in two patients. In regards to hypoglossal-facial nerve transfer using different modifications, we achieved facial function HB grade III in nine patients and grade IV in two patients. Facial contracture, synkinesis and tongue atrophy were found in three patients, and synkinesis was found in five patients. However, those who had primary direct facial-hypoglossal end-to-side anastomosis showed the best result without any neurological deficit. Among various reanimation techniques, when indicated, direct end-to-side facial-hypoglossal anastomosis through epineural suturing is the most effective technique with excellent outcomes for facial reanimation and preservation of tongue movement, particularly when performed as a primary technique. Copyright © 2016 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Chinese manipulation for mechanical neck pain: a systematic review.

PubMed

Lin, Jian Hua; Chiu, Thomas Tai Wing; Hu, Jia

2012-11-01

To assess whether Chinese manipulation improves pain, function/disability and global perceived effect in adults with acute/subacute/chronic neck pain. CAJ Full-text Database (Chinese), Wanfang Database (Chinese), Cochrane Database (English) and Medline (English). Literature searching was performed with the following keywords and their combination: 'manual therapy/bone setting/Chinese manipulation', 'neck/cervical pain', 'cervical vertebrae', 'cervical spondylosis/radiculopathy' and 'randomized controlled trial/review.' Two independent reviewers selected studies, extracted data and assessed risk of bias for each included study. Randomized controlled trials or quasi-randomized controlled trials on the effect of Chinese manipulation in treating adult patients with neck pain were selected. Mean differences with 95% confidence intervals (CI) were calculated. Quality of the evidence was assessed by the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Four studies (610 participants) were included in this review. There was very low-quality evidence suggesting that, compared to cervical traction in sitting, Chinese manipulation produced more immediate post-intervention pain relief (mean difference: -1.06; 95% CI: -1.37~ -0.75; P < 0.001) and improvement of global signs and symptoms (mean difference: -3.81; 95% CI: -4.71 ~ -2.91; P < 0.001). Very low-quality evidence showed that Chinese manipulation alone was superior to Chinese traditional massage in immediate post-intervention pain relief (mean difference: -2.02; 95% CI: -2.78~ -1.26; P < 0.001). There was limited evidence showing Chinese manipulation could produce short-term improvement for neck pain.

Neuromuscular electrical stimulation of the hindlimb muscles for movement therapy in a rodent model.

PubMed

Ichihara, Kazuhiko; Venkatasubramanian, Ganapriya; Abbas, James J; Jung, Ranu

2009-01-30

Neuromuscular electrical stimulation (NMES) can provide functional movements in people after central nervous system injury. The neuroplastic effects of long-term NMES-induced repetitive limb movement are not well understood. A rodent model of neurotrauma in which NMES can be implemented may be effective for such investigations. We present a rodent model for NMES of the flexor and extensor muscles of the hip, knee, and ankle hindlimb muscles. Custom fabricated intramuscular stimulating electrodes for rodents were implanted near identified motor points of targeted muscles in ten adult, female Long Evans rats. The effects of altering NMES pulse stimulation parameters were characterized using strength duration curves, isometric joint torque recruitment curves and joint angle measures. The data indicate that short pulse widths have the advantage of producing graded torque recruitment curves when current is used as the control parameter. A stimulus frequency of 75 Hz or more produces fused contractions. The data demonstrate ability to accurately implant the electrodes and obtain selective, graded, repeatable, strong muscle contractions. Knee and ankle angular excursions comparable to those obtained in normal treadmill walking in the same rodent species can be obtained by stimulating the target muscles. Joint torques (normalized to body weight) obtained were larger than those reported in the literature for small tailed therian mammals and for peak isometric ankle plantarflexion in a different rodent species. This model system could be used for investigations of NMES assisted hindlimb movement therapy.

Smartphone-based grading of apple quality

NASA Astrophysics Data System (ADS)

Li, Xianglin; Li, Ting

2018-02-01

Apple quality grading is a critical issue in apple industry which is one economical pillar of many countries. Artificial grading is inefficient and of poor accuracy. Here we proposed to develop a portable, convenient, real-time, and low cost method aimed at grading apple. Color images of the apples were collected with a smartphone and the grade of sampled apple was assessed by a customized smartphone app, which offered the functions translating RGB color values of the apple to color grade and translating the edge of apple image to weight grade. The algorithms are based on modeling with a large number of apple image at different grades. The apple grade data evaluated by the smartphone are in accordance with the actual data. This study demonstrated the potential of smart phone in apple quality grading/online monitoring at gathering and transportation stage for apple industry.

Manufacturing of PZT-nickel functionally graded piezoelectric ceramics

NASA Astrophysics Data System (ADS)

Rubio, Wilfredo M.; Silva, Emílio C. N.; Buiochi, Flávio

2012-05-01

A recent approach for designing and manufacturing piezoelectric ceramics consists of using the functionally graded materials (FGM) concept. In this work, nickel (Ni) is used to generate a new PZT-Ni graded ceramic and its dynamic behavior is experimentally explored. The PZT-Ni graded ceramic is manufactured by using the technique of Spark Plasma Sintering (SPS). The ceramic is graded from the top to the bottom surface (along 6 mm of thickness). Specifically, five layers of green powders are sintered: 100 wt% PZT-5A, 90 wt% PZT-5A and 10 wt% Ni, 80 wt% PZT-5A and 20 wt% Ni, 70 wt% PZT-5A and 30 wt% Ni, 60 wt% PZT-5A and 40 wt% Ni. Thus, Ni is used as a second phase, which is added to a PZT-5A matrix, changing its concentration. No manufacturing defects or cracks or exfoliated layers are observed. However, graphite diffusion is observed from the graphite die into the graded ceramic, which does not affect its performance; hence, the ceramic contains enough piezoelectric properties, which allows its polarization and dynamic characterization by determining the impedance curve of the PZT-Ni graded ceramic. The PZT-Ni graded ceramic vibrates at 1.04 MHz, 1.55 MHz and 2.07 MHz.

Francisco Goya: "The Sleep of Reason Produces Monsters."

ERIC Educational Resources Information Center

Andre, Linda

1988-01-01

Uses Goya's "The Sleep of Reason Produces Monsters" to acquaint students in grades 10-12 with the artist's highly personal imagery and innovative printmaking techniques. Includes lesson objectives, instructional strategies, follow-up procedures, and background information about the artist and the painting. (GEA)

Executive Functioning Predicts Academic Achievement in Middle School: A Four-Year Longitudinal Study

ERIC Educational Resources Information Center

Samuels, William Ellery; Tournaki, Nelly; Blackman, Sheldon; Zilinski, Christopher

2016-01-01

Executive functioning (EF) is a strong predictor of children's and adolescents' academic performance. Although research indicates that EF can increase during childhood and adolescence, few studies have tracked the effect of EF on academic performance throughout the middle school grades. EF was measured at the end of Grades 6-9 through 21 teachers'…

Analyzing the Efficiency of Argumentation Based Practices on 9th Grade Functions Subject

ERIC Educational Resources Information Center

Mercan, Emel; Isleyen, Tevfik

2017-01-01

The purpose of this study is to investigate the effect of teaching 9th grade Functions subject through argumentation on students' science process skills, attitudes towards Maths, willingness for argumentation and conceptual comprehension. The study was designed as a quasi-experimental model with pretest-posttest control group. It was carried out…

Teaching Mathematics with Technology. How to Win People and Influence Friends: Calculators in the Primary Grades.

ERIC Educational Resources Information Center

Taylor, Lyn, Ed.; Thompson, Virginia, Comp.

1992-01-01

Postulated here is the notion that the exploration of number patterns with calculators is a valuable mathematical learning activity that should be commenced in the primary grades. Various activities are presented that make use of the constant function key, which is available on many of the inexpensive four-function calculators. (JJK)

Algebraic Reasoning: Professor Arbegla Introduces Variables and Functions. GEMS Teacher's Guide for Grades 3-5.

ERIC Educational Resources Information Center

Kopp, Jaine; Bergman, Lincoln

This teacher guide helps build a solid foundation in algebra for students in grades 3-5 in which students gain essential understanding of properties of numbers, variables, functions, equations, and formulas. Throughout the problem solving activities, students use computational skills and gain a deeper understanding of the number system. Students…

Eighth Grade In-Service Teachers' Knowledge of Proportional Reasoning and Functions: A Secondary Data Analysis

ERIC Educational Resources Information Center

Masters, Jessica

2012-01-01

A secondary data analysis was conducted using a large dataset from a study related to online professional development for eighth grade teachers of mathematics. Using this data, the paper provides a snapshot of the current state of teachers' knowledge related to proportional reasoning and functions. The paper also considers how teachers' knowledge…

Error Patterns with Fraction Calculations at Fourth Grade as a Function of Students' Mathematics Achievement Status

ERIC Educational Resources Information Center

Schumacher, Robin F.; Malone, Amelia S.

2017-01-01

The goal of this study was to describe fraction-calculation errors among fourth-grade students and to determine whether error patterns differed as a function of problem type (addition vs. subtraction; like vs. unlike denominators), orientation (horizontal vs. vertical), or mathematics-achievement status (low-, average-, or high-achieving). We…

Methods of electrophoretic deposition for functionally graded porous nanostructures and systems thereof

DOEpatents

Worsley, Marcus A; Baumann, Theodore F; Satcher, Joe H; Olson, Tammy Y; Kuntz, Joshua D; Rose, Klint A

2015-03-03

In one embodiment, an aerogel includes a layer of shaped particles having a particle packing density gradient in a thickness direction of the layer, wherein the shaped particles are characterized by being formed in an electrophoretic deposition (EPD) process using an impurity. In another embodiment, a method for forming a functionally graded porous nanostructure includes adding particles of an impurity and a solution to an EPD chamber, applying a voltage difference across the two electrodes of the EPD chamber to create an electric field in the EPD chamber, and depositing the material onto surfaces of the particles of the impurity to form shaped particles of the material. Other functionally graded materials and methods are described according to more embodiments.

Longitudinal Fracture Analysis of a Two-Dimensional Functionally Graded Beam

NASA Astrophysics Data System (ADS)

Rizov, V.

2017-11-01

Longitudinal fracture in a two-dimensional functionally graded beam is analyzed. The modulus of elasticity varies continuously in the beam cross-section. The beam is clamped in its right-hand end. The external loading consists of one longitudinal force applied at the free end of the lower crack arm. The longitudinal crack is located in the beam mid-plane. The fracture is studied in terms of the strain energy release rate. The solution derived is used to elucidate the effects of material gradients along the height as well as along the width of the beam cross-section on the fracture behaviour. The results obtained indicate that the fracture in two-dimensional functionally graded beams can be regulated efficiently by employing appropriate material gradients.

Compositional control of continuously graded anode functional layer

NASA Astrophysics Data System (ADS)

McCoppin, J.; Barney, I.; Mukhopadhyay, S.; Miller, R.; Reitz, T.; Young, D.

2012-10-01

In this work, solid oxide fuel cells (SOFC's) are fabricated with linear-compositionally graded anode functional layers (CGAFL) using a computer-controlled compound aerosol deposition (CCAD) system. Cells with different CGAFL thicknesses (30 um and 50 um) are prepared with a continuous compositionally graded interface deposited between the electrolyte and anode support current collecting regions. The compositional profile was characterized using energy dispersive X-ray spectroscopic mapping. An analytical model of the compound aerosol deposition was developed. The model predicted compositional profiles for both samples that closely matched the measured profiles, suggesting that aerosol-based deposition methods are capable of creating functional gradation on length scales suitable for solid oxide fuel cell structures. The electrochemical performances of the two cells are analyzed using electrochemical impedance spectroscopy (EIS).

Chemical and Physical Properties, Safety and Application of Partially Hydrolized Guar Gum as Dietary Fiber

PubMed Central

Yoon, Seon-Joo; Chu, Djong-Chi; Raj Juneja, Lekh

2008-01-01

The ideal water-soluble dietary fiber for the fiber-enrichment of foods must be very low in viscosity, tasteless, odorless, and should produce clear solutions in beverages. Partially hydrolyzed guar gum (PHGG) produced from guar gum by enzymatic process has the same chemical structure with intact guar gum but less than one-tenth the original molecular length of guar gum, which make available to be used as film former, foam stabilizer and swelling agent. The viscosity of PHGG is about 10 mPa·s in 5% aqueous solution, whereas 1% solution of guar gum shows range from 2,000 to 3,000 mPa·s. In addition, PHGG is greatly stable against low pH, heat, acid and digestive enzyme. For these reasons, PHGG seems to be one of the most beneficial dietary fiber materials. It also showed that interesting physiological functions still fully exert the nutritional function of a dietary fiber. PHGG has, therefore, been used primarily for a nutritional purpose and became fully integrated food material without altering the rheology, taste, texture and color of final products. PHGG named as Benefiber® in USA has self-affirmation on GRAS status of standard grade PHGG. PHGG named as Sunfiber® is now being used in various beverages, food products and medicinal foods as a safe, natural and functional dietary fiber in all over the world. PMID:18231623

A non-aggressive, highly efficient, enzymatic method for dissociation of human brain-tumors and brain-tissues to viable single-cells.

PubMed

Volovitz, Ilan; Shapira, Netanel; Ezer, Haim; Gafni, Aviv; Lustgarten, Merav; Alter, Tal; Ben-Horin, Idan; Barzilai, Ori; Shahar, Tal; Kanner, Andrew; Fried, Itzhak; Veshchev, Igor; Grossman, Rachel; Ram, Zvi

2016-06-01

Conducting research on the molecular biology, immunology, and physiology of brain tumors (BTs) and primary brain tissues requires the use of viably dissociated single cells. Inadequate methods for tissue dissociation generate considerable loss in the quantity of single cells produced and in the produced cells' viability. Improper dissociation may also demote the quality of data attained in functional and molecular assays due to the presence of large quantities cellular debris containing immune-activatory danger associated molecular patterns, and due to the increased quantities of degraded proteins and RNA. Over 40 resected BTs and non-tumorous brain tissue samples were dissociated into single cells by mechanical dissociation or by mechanical and enzymatic dissociation. The quality of dissociation was compared for all frequently used dissociation enzymes (collagenase, DNase, hyaluronidase, papain, dispase) and for neutral protease (NP) from Clostridium histolyticum. Single-cell-dissociated cell mixtures were evaluated for cellular viability and for the cell-mixture dissociation quality. Dissociation quality was graded by the quantity of subcellular debris, non-dissociated cell clumps, and DNA released from dead cells. Of all enzymes or enzyme combinations examined, NP (an enzyme previously not evaluated on brain tissues) produced dissociated cell mixtures with the highest mean cellular viability: 93 % in gliomas, 85 % in brain metastases, and 89 % in non-tumorous brain tissue. NP also produced cell mixtures with significantly less cellular debris than other enzymes tested. Dissociation using NP was non-aggressive over time-no changes in cell viability or dissociation quality were found when comparing 2-h dissociation at 37 °C to overnight dissociation at ambient temperature. The use of NP allows for the most effective dissociation of viable single cells from human BTs or brain tissue. Its non-aggressive dissociative capacity may enable ambient-temperature shipping of tumor pieces in multi-center clinical trials, meanwhile being dissociated. As clinical grade NP is commercially available it can be easily integrated into cell-therapy clinical trials in neuro-oncology. The high quality viable cells produced may enable investigators to conduct more consistent research by avoiding the experimental artifacts associated with the presence dead cells or cellular debris.

Economical Emission-Line Mapping: ISM Properties of Nearby Protogalaxy Analogs

NASA Astrophysics Data System (ADS)

Monkiewicz, Jacqueline A.

2017-01-01

Optical emission line imaging can produce a wealth of information about the conditions of the interstellar medium, but a full set of custom emission-line filters for a professional-grade telescope camera can cost many thousands of dollars. A cheaper alternative is to use commercially-produced 2-inch narrow-band astrophotography filters. In order to use these standardized filters with professional-grade telescope cameras, custom filter mounts must be manufactured for each individual filter wheel. These custom filter adaptors are produced by 3-D printing rather than standard machining, which further lowers the total cost.I demonstrate the feasibility of this technique with H-alpha, H-beta, and [OIII] emission line mapping of the low metallicity star-forming galaxies IC10 and NGC 1569, taken with my astrophotography filter set on three different 2-meter class telescopes in Southern Arizona.

THE PRODUCTION AND EVALUATION OF THREE COMPUTER-BASED ECONOMICS GAMES FOR THE SIXTH GRADE. FINAL REPORT.

ERIC Educational Resources Information Center

WING, RICHARD L.; AND OTHERS

THE PURPOSE OF THE EXPERIMENT WAS TO PRODUCE AND EVALUATE 3 COMPUTER-BASED ECONOMICS GAMES AS A METHOD OF INDIVIDUALIZING INSTRUCTION FOR GRADE 6 STUDENTS. 26 EXPERIMENTAL SUBJECTS PLAYED 2 ECONOMICS GAMES, WHILE A CONTROL GROUP RECEIVED CONVENTIONAL INSTRUCTION ON SIMILAR MATERIAL. IN THE SUMERIAN GAME, STUDENTS SEATED AT THE TYPEWRITER TERMINALS…

Graded-index whispering gallery mode resonators

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy (Inventor); Maleki, Lutfollah (Inventor); Ilchenko, Vladimir (Inventor); Matsko, Andrey B. (Inventor)

2005-01-01

Whispering gallery mode optical resonators which have spatially-graded refractive indices. In one implementation, the refractive index spatially increases with a distance from an exterior surface of such a resonator towards an interior of the resonator to produce substantially equal spectral separations for different whispering gallery modes. An optical coupler may be used with such a resonator to provide proper optical coupling.

Quality distribution of pallet parts from low-grade lumber

Treesearch

Hollis R. Large; Richard E. Frost

1974-01-01

To produce better pallets, the higher quality parts should be used in the more vulnerable positions in the pallet. To determine the feasibility of doing this, pallet parts cut from commonly used lumber mixes were graded into four quality levels. The distributions obtained indicate that sufficient numbers of high-quality parts can be cut from existing raw material to...

Grade of Membership Response Time Model for Detecting Guessing Behaviors

ERIC Educational Resources Information Center

Pokropek, Artur

2016-01-01

A response model that is able to detect guessing behaviors and produce unbiased estimates in low-stake conditions using timing information is proposed. The model is a special case of the grade of membership model in which responses are modeled as partial members of a class that is affected by motivation and a class that responds only according to…

Using low-grade hardwoods for CLT production: a yield analysis

Treesearch

R. Edward Thomas; Urs Buehlmann

2017-01-01

Low-grade hardwood logs are the by-product of logging operations and, more frequently today, urban tree removals. The market prices for these logs is low, as is the value recovered from their logs when producing traditional forest products such as pallet parts, railroad ties, landscaping mulch, or chips for pulp. However, the emergence of cross-laminated timber (CLT)...

The Writing of Expository Texts in Early Grades: What Predicative Analysis Teaches Us

ERIC Educational Resources Information Center

Gagnon, Renee; Ziarko, Helene

2012-01-01

This paper presents the results of a predicative analysis led on comparison and problem-solution texts produced by pupils of the second and third grades of primary school following a set of reading and writing instructional activities. The production of those texts is of a special challenge to the young writers because of the cognitive and…

Performing Race in Four Culturally Diverse Fourth Grade Classrooms: Silence, Race Talk, and the Negotiation of Social Boundaries

ERIC Educational Resources Information Center

Schaffer, Rebecca; Skinner, Debra G.

2009-01-01

This article addresses how preadolescents produce and perform race through an ethnographic study of 8- to 11-year-old students in four fourth grade classrooms in the southeastern United States. Although Asian, Latino, and white students tended to avoid explicit talk of race, many white students constructed black students as disruptive…

Effect of grading fingerling hybrid catfish (Channel Catfish X Blue Catfish) on growth, production, feed conversion, and foodfish size distribution.

USDA-ARS?s Scientific Manuscript database

Hybrid catfish production ponds often produce a wide size range of fish and payments to farmers may be reduced due to discounts for larger fish. This study was conducted to determine effect of grading hybrid catfish fingerlings on the size distribution of harvested foodfish. Three 0.25-acre ponds we...

Antireflective graded index silica coating, method for making

DOEpatents

Yoldas, Bulent E.; Partlow, Deborah P.

1985-01-01

Antireflective silica coating for vitreous material is substantially non-reflecting over a wide band of radiations. This is achieved by providing the coating with a graded degree of porosity which grades the index of refraction between that of air and the vitreous material of the substrate. To prepare the coating, there is first prepared a silicon-alkoxide-based coating solution of particular polymer structure produced by a controlled proportion of water to alkoxide and a controlled concentration of alkoxide to solution, along with a small amount of catalyst. The primary solvent is alcohol and the solution is polymerized and hydrolized under controlled conditions prior to use. The prepared solution is applied as a film to the vitreous substrate and rapidly dried. It is thereafter heated under controlled conditions to volatilize the hydroxyl radicals and organics therefrom and then to produce a suitable pore morphology in the residual porous silica layer. The silica layer is then etched in order to enlarge the pores in a graded fashion, with the largest of the pores remaining being sufficiently small that radiations to be passed through the substrate are not significantly scattered. For use with quartz substrates, extremely durable coatings which display only 0.1% reflectivity have been prepared.

The relationship between oral and written narratives: A three-year longitudinal study of narrative cohesion, coherence, and structure.

PubMed

Pinto, Giuliana; Tarchi, Christian; Bigozzi, Lucia

2015-12-01

The relationship between oral language and the writing process at early acquisition stages and the ways the former can enhance or limit the latter has not been researched extensively. The predictive relationship between kindergarten oral narrative competence and the first- and second-grade written narrative competence was explored in a 3-year longitudinal study. Among the first and second graders, the relationship between orthographic competence and narrative competence in written productions was also analysed. One hundred and nine Italian children participated in this study. Kindergarteners produced an oral narrative, whereas the first and second graders produced a written narrative. The oral and written narratives were analysed in terms of cohesion, coherence, and structure. The first-grade orthographic competence was assessed via a dictation task. Multiple linear regression and mediational analyses were performed. Kindergarten oral narrative competence affected the first- and second-grade written narrative competence via a mediational effect of orthographic competence. The results suggest the importance of practicing oral narrative competence in kindergarten and first grade and the value of composition quality independent of orthographic text accuracy. © 2015 The British Psychological Society.

The effectiveness of graded activity for low back pain in occupational healthcare.

PubMed

Steenstra, I A; Anema, J R; Bongers, P M; de Vet, H C W; Knol, D L; van Mechelen, W

2006-11-01

Low back pain is a common medical and social problem associated with disability and absence from work. Knowledge on effective return to work (RTW) interventions is scarce. To determine the effectiveness of graded activity as part of a multistage RTW programme. Randomised controlled trial. Occupational healthcare. 112 workers absent from work for more than eight weeks due to low back pain were randomised to either graded activity (n = 55) or usual care (n = 57). Graded activity, a physical exercise programme aimed at RTW based on operant-conditioning behavioural principles. The number of days off work until first RTW for more then 28 days, total number of days on sick leave during follow up, functional status, and severity of pain. Follow up was 26 weeks. Graded activity prolonged RTW. Median time until RTW was equal to the total number of days on sick leave and was 139 (IQR = 69) days in the graded activity group and 111 (IQR = 76) days in the usual care group (hazard ratio = 0.52, 95% CI 0.32 to 0.86). An interaction between a prior workplace intervention and graded activity, together with a delay in the start of the graded activity intervention, explained most of the delay in RTW (hazard ratio = 0.86, 95% CI 0.40 to 1.84 without prior intervention and 0.39, 95% CI 0.19 to 0.81 with prior intervention). Graded activity did not improve pain or functional status clinically significantly. Graded activity was not effective for any of the outcome measures. Different interventions combined can lead to a delay in RTW. Delay in referral to graded activity delays RTW. In implementing graded activity special attention should be paid to the structure and process of care.

49 CFR 234.265 - Timing relays and timing devices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS... devices which perform internal functions associated with motion detectors, motion sensors, and grade...

Tailoring vibration mode shapes using topology optimization and functionally graded material concepts

NASA Astrophysics Data System (ADS)

Montealegre Rubio, Wilfredo; Paulino, Glaucio H.; Nelli Silva, Emilio Carlos

2011-02-01

Tailoring specified vibration modes is a requirement for designing piezoelectric devices aimed at dynamic-type applications. A technique for designing the shape of specified vibration modes is the topology optimization method (TOM) which finds an optimum material distribution inside a design domain to obtain a structure that vibrates according to specified eigenfrequencies and eigenmodes. Nevertheless, when the TOM is applied to dynamic problems, the well-known grayscale or intermediate material problem arises which can invalidate the post-processing of the optimal result. Thus, a more natural way for solving dynamic problems using TOM is to allow intermediate material values. This idea leads to the functionally graded material (FGM) concept. In fact, FGMs are materials whose properties and microstructure continuously change along a specific direction. Therefore, in this paper, an approach is presented for tailoring user-defined vibration modes, by applying the TOM and FGM concepts to design functionally graded piezoelectric transducers (FGPT) and non-piezoelectric structures (functionally graded structures—FGS) in order to achieve maximum and/or minimum vibration amplitudes at certain points of the structure, by simultaneously finding the topology and material gradation function. The optimization problem is solved by using sequential linear programming. Two-dimensional results are presented to illustrate the method.

Deep versus periventricular white matter lesions and cognitive function in a community sample of middle-aged participants.

PubMed

Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Bargalló, Núria; Arenillas, Juan Francisco; Barrios, Maite; Cáceres, Cynthia; Toran, Pere; Alzamora, Maite; Dávalos, Antoni; Mataró, Maria

2012-09-01

The association of cerebral white matter lesions (WMLs) with cognitive status is not well understood in middle-aged individuals. Our aim was to determine the specific contribution of periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs) to cognitive function in a community sample of asymptomatic participants aged 50 to 65 years. One hundred stroke- and dementia-free adults completed a comprehensive neuropsychological battery and brain MRI protocol. Participants were classified according to PVH and DWMH scores (Fazekas scale). We dichotomized our sample into low grade WMLs (participants without or with mild lesions) and high grade WMLs (participants with moderate or severe lesions). Analyses were performed separately in PVH and DWMH groups. High grade DWMHs were associated with significantly lower scores in executive functioning (-0.45 standard deviations [SD]), attention (-0.42 SD), verbal fluency (-0.68 SD), visual memory (-0.52 SD), visuospatial skills (-0.79 SD), and psychomotor speed (-0.46 SD). Further analyses revealed that high grade DWMHs were also associated with a three- to fourfold increased risk of impaired scores (i.e.,<1.5 SD) in executive functioning, verbal fluency, visuospatial skills, and psychomotor speed. Our findings suggest that only DWMHs, not PVHs, are related to diminished cognitive function in middle-aged individuals. (JINS, 2012, 18, 1-12).

Classification of patients by severity grades during triage in the emergency department using data mining methods.

PubMed

Zmiri, Dror; Shahar, Yuval; Taieb-Maimon, Meirav

2012-04-01

To test the feasibility of classifying emergency department patients into severity grades using data mining methods. Emergency department records of 402 patients were classified into five severity grades by two expert physicians. The Naïve Bayes and C4.5 algorithms were applied to produce classifiers from patient data into severity grades. The classifiers' results over several subsets of the data were compared with the physicians' assessments, with a random classifier, and with a classifier that selects the maximal-prevalence class. Positive predictive value, multiple-class extensions of sensitivity and specificity combinations, and entropy change. The mean accuracy of the data mining classifiers was 52.94 ± 5.89%, significantly better (P < 0.05) than the mean accuracy of a random classifier (34.60 ± 2.40%). The entropy of the input data sets was reduced through classification by a mean of 10.1%. Allowing for classification deviations of one severity grade led to mean accuracy of 85.42 ± 1.42%. The classifiers' accuracy in that case was similar to the physicians' consensus rate. Learning from consensus records led to better performance. Reducing the number of severity grades improved results in certain cases. The performance of the Naïve Bayes and C4.5 algorithms was similar; in unbalanced data sets, Naïve Bayes performed better. It is possible to produce a computerized classification model for the severity grade of triage patients, using data mining methods. Learning from patient records regarding which there is a consensus of several physicians is preferable to learning from each physician's patients. Either Naïve Bayes or C4.5 can be used; Naïve Bayes is preferable for unbalanced data sets. An ambiguity in the intermediate severity grades seems to hamper both the physicians' agreement and the classifiers' accuracy. © 2010 Blackwell Publishing Ltd.

Textile industry needs

USDA-ARS?s Scientific Manuscript database

The immediate customer of the cotton gin is the producer; however the ultimate customers are the textile mill and the consumer. The ginner has the challenging job to satisfy both the producer and the textile industry. The classing and grading systems are intended to assign economic value to the ba...

[First line management without IVF of infertility related to endometriosis: Result of medical therapy? Results of ovarian superovulation? Results of intrauterine insemination? CNGOF-HAS Endometriosis Guidelines].

PubMed

Boujenah, J; Santulli, P; Mathieu-d'Argent, E; Decanter, C; Chauffour, C; Poncelet, P

2018-03-01

Using the structured methodology of French guidelines (HAS-CNGOF), the aim of this chapter was to formulate good practice points (GPP), in relation to optimal non-ART management of endometriosis related to infertility, based on the best available evidence in the literature. This guideline was produced by a group of experts in the field including a thorough systematic search of the literature (from January 1980 to March 2017). Were included only women with endometriosis related to infertility. For each recommendation, a grade (A-D, where A is the highest quality) was assigned based on the strength of the supporting evidence. Management of endometriosis related to infertility should be multidisciplinary and take account into the pain, the global evaluation of infertile couple and the different phenotypes of endometriotic lesions (good practice point). Hormonal treatment for suppression of ovarian function should not prescribe to improve fertility (grade A). After laproscopy for endometriosis related to infertility, the Endometriosis Fertility Index should be used to counsel patients regarding duration of conventional treatments before undergoing ART (grade C). After laparoscopy surgery for infertile women with AFS/ASRM stage I/II endometriosis or superficial peritoneal endometriosis, controlled ovarian stimulation with or without intrauterine insemination could be used to enhance non-ART pregnancy rate (grade C). Gonadotrophins should be the first line therapy for the stimulation (grade B). The number of cycles before referring ART should not exceed up to 6 cycles (good practice point). No recommendation can be performed for non-ART management of deep infiltrating endometriosis or endometrioma, as suitable evidence is lacking. Non-ART management is a possible option for the management of endometriosis related to infertility. Endometriosis Fertilty Index could be a useful tool for subsequent postoperative fertility management. Controlled ovarian stimulation can be proposed. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Multi-scale characterization of pore evolution in a combustion metamorphic complex, Hatrurim basin, Israel: Combining (ultra) small-angle neutron scattering and image analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hsiu-Wen; Anovitz, Lawrence; Burg, Avihu

Backscattered scanning electron micrograph and ultra small- and small-angle neutron scattering data have been combined to provide statistically meaningful data on the pore/grain structure and pore evolution of combustion metamorphic complexes from the Hatrurim basin, Israel. Three processes, anti-sintering roughening, alteration of protolith (dehydration, decarbonation, and oxidation) and crystallization of high-temperature minerals, occurred simultaneously, leading to significant changes in observed pore/grain structures. Pore structures in the protoliths, and in lowand high-grade metamorphic rocks show surface (Ds) and mass (Dm) pore fractal geometries with gradual increases in both Ds and Dm values as a function of metamorphic grade. This suggests thatmore » increases in pore volume and formation of less branching pore networks are accompanied by a roughening of pore/grain interfaces. Additionally, pore evolution during combustion metamorphism is also characterized by reduced contributions from small-scale pores to the cumulative porosity in the high-grade rocks. At high temperatures, small-scale pores may be preferentially closed by the formation of high-temperature minerals, producing a rougher morphology with increasing temperature. Alternatively, large-scale pores may develop at the expense of small-scale pores. These observations (pore fractal geometry and cumulative porosity) indicate that the evolution of pore/grain structures is correlated with the growth of high-temperature phases and is a consequence of the energy balance between pore/grain surface energy and energy arising from heterogeneous phase contacts. The apparent pore volume density further suggests that the localized time/temperature development of the high-grade Hatrurim rocks is not simply an extension of that of the low-grade rocks. The former likely represents the "hot spots (burning foci)" in the overall metamorphic terrain while the latter may represent contact aureoles.« less

Upper-extremity and mobility subdomains from the Patient-Reported Outcomes Measurement Information System (PROMIS) adult physical functioning item bank.

PubMed

Hays, Ron D; Spritzer, Karen L; Amtmann, Dagmar; Lai, Jin-Shei; Dewitt, Esi Morgan; Rothrock, Nan; Dewalt, Darren A; Riley, William T; Fries, James F; Krishnan, Eswar

2013-11-01

To create upper-extremity and mobility subdomain scores from the Patient-Reported Outcomes Measurement Information System (PROMIS) physical functioning adult item bank. Expert reviews were used to identify upper-extremity and mobility items from the PROMIS item bank. Psychometric analyses were conducted to assess empirical support for scoring upper-extremity and mobility subdomains. Data were collected from the U.S. general population and multiple disease groups via self-administered surveys. The sample (N=21,773) included 21,133 English-speaking adults who participated in the PROMIS wave 1 data collection and 640 Spanish-speaking Latino adults recruited separately. Not applicable. We used English- and Spanish-language data and existing PROMIS item parameters for the physical functioning item bank to estimate upper-extremity and mobility scores. In addition, we fit graded response models to calibrate the upper-extremity items and mobility items separately, compare separate to combined calibrations, and produce subdomain scores. After eliminating items because of local dependency, 16 items remained to assess upper extremity and 17 items to assess mobility. The estimated correlation between upper extremity and mobility was .59 using existing PROMIS physical functioning item parameters (r=.60 using parameters calibrated separately for upper-extremity and mobility items). Upper-extremity and mobility subdomains shared about 35% of the variance in common, and produced comparable scores whether calibrated separately or together. The identification of the subset of items tapping these 2 aspects of physical functioning and scored using the existing PROMIS parameters provides the option of scoring these subdomains in addition to the overall physical functioning score. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Core vocabulary in the narratives of bilingual children with and without language impairment.

PubMed

Shivabasappa, Prarthana; Peña, Elizabeth D; Bedore, Lisa M

2017-09-22

Children with primary language impairment (PLI) demonstrate deficits in morphosyntax and vocabulary. We studied how these deficits may manifest in the core vocabulary use of bilingual children with PLI. Thirty bilingual children with and without PLI who were matched pairwise (experimental group) narrated two Spanish and two English stories in kindergarten and first grade. Core vocabulary was derived from the 30 most frequently used words in the stories of 65 and 37 typically developing (TD) first graders (normative group) for Spanish and English, respectively. The number of words each child in the experimental group produced out of the 30 identified core vocabulary words and frequency of each of the core words produced each year were analysed. Children with PLI produced fewer core vocabulary words compared to their TD peers after controlling for total words produced. This difference was more pronounced in first grade. They produced core vocabulary words less frequently in kindergarten than their TD peers. Both groups produced core vocabulary words more frequently in English than Spanish. Bilingual children with PLI demonstrate a less productive core vocabulary use compared to their TD peers in both their languages illustrating the nature of their grammatical and lexical-semantic deficits.

Vibration analysis and transient response of a functionally graded piezoelectric curved beam with general boundary conditions

NASA Astrophysics Data System (ADS)

Su, Zhu; Jin, Guoyong; Ye, Tiangui

2016-06-01

The paper presents a unified solution for free and transient vibration analyses of a functionally graded piezoelectric curved beam with general boundary conditions within the framework of Timoshenko beam theory. The formulation is derived by means of the variational principle in conjunction with a modified Fourier series which consists of standard Fourier cosine series and supplemented functions. The mechanical and electrical properties of functionally graded piezoelectric materials (FGPMs) are assumed to vary continuously in the thickness direction and are estimated by Voigt’s rule of mixture. The convergence, accuracy and reliability of the present formulation are demonstrated by comparing the present solutions with those from the literature and finite element analysis. Numerous results for FGPM beams with different boundary conditions, geometrical parameters as well as material distributions are given. Moreover, forced vibration of the FGPM beams subjected to dynamic loads and general boundary conditions are also investigated.

Analysis of Photothermal Characterization of Layered Materials: Design of Optimal Experiments

NASA Technical Reports Server (NTRS)

Cole, Kevin D.

2003-01-01

In this paper numerical calculations are presented for the steady-periodic temperature in layered materials and functionally-graded materials to simulate photothermal methods for the measurement of thermal properties. No laboratory experiments were performed. The temperature is found from a new Green s function formulation which is particularly well-suited to machine calculation. The simulation method is verified by comparison with literature data for a layered material. The method is applied to a class of two-component functionally-graded materials and results for temperature and sensitivity coefficients are presented. An optimality criterion, based on the sensitivity coefficients, is used for choosing what experimental conditions will be needed for photothermal measurements to determine the spatial distribution of thermal properties. This method for optimal experiment design is completely general and may be applied to any photothermal technique and to any functionally-graded material.

Fracture and fatigue analysis of functionally graded and homogeneous materials using singular integral equation approach

NASA Astrophysics Data System (ADS)

Zhao, Huaqing

There are two major objectives of this thesis work. One is to study theoretically the fracture and fatigue behavior of both homogeneous and functionally graded materials, with or without crack bridging. The other is to further develop the singular integral equation approach in solving mixed boundary value problems. The newly developed functionally graded materials (FGMs) have attracted considerable research interests as candidate materials for structural applications ranging from aerospace to automobile to manufacturing. From the mechanics viewpoint, the unique feature of FGMs is that their resistance to deformation, fracture and damage varies spatially. In order to guide the microstructure selection and the design and performance assessment of components made of functionally graded materials, in this thesis work, a series of theoretical studies has been carried out on the mode I stress intensity factors and crack opening displacements for FGMs with different combinations of geometry and material under various loading conditions, including: (1) a functionally graded layer under uniform strain, far field pure bending and far field axial loading, (2) a functionally graded coating on an infinite substrate under uniform strain, and (3) a functionally graded coating on a finite substrate under uniform strain, far field pure bending and far field axial loading. In solving crack problems in homogeneous and non-homogeneous materials, a very powerful singular integral equation (SEE) method has been developed since 1960s by Erdogan and associates to solve mixed boundary value problems. However, some of the kernel functions developed earlier are incomplete and possibly erroneous. In this thesis work, mode I fracture problems in a homogeneous strip are reformulated and accurate singular Cauchy type kernels are derived. Very good convergence rates and consistency with standard data are achieved. Other kernel functions are subsequently developed for mode I fracture in functionally graded materials. This work provides a solid foundation for further applications of the singular integral equation approach to fracture and fatigue problems in advanced composites. The concept of crack bridging is a unifying theory for fracture at various length scales, from atomic cleavage to rupture of concrete structures. However, most of the previous studies are limited to small scale bridging analyses although large scale bridging conditions prevail in engineering materials. In this work, a large scale bridging analysis is included within the framework of singular integral equation approach. This allows us to study fracture, fatigue and toughening mechanisms in advanced materials with crack bridging. As an example, the fatigue crack growth of grain bridging ceramics is studied. With the advent of composite materials technology, more complex material microstructures are being introduced, and more mechanics issues such as inhomogeneity and nonlinearity come into play. Improved mathematical and numerical tools need to be developed to allow theoretical modeling of these materials. This thesis work is an attempt to meet these challenges by making contributions to both micromechanics modeling and applied mathematics. It sets the stage for further investigations of a wide range of problems in the deformation and fracture of advanced engineering materials.

Error Patterns with Fraction Calculations at Fourth Grade as a Function of Students' Mathematics Achievement Status

ERIC Educational Resources Information Center

Schumacher, Robin F.; Malone, Amelia S.

2017-01-01

The goal of the present study was to describe fraction-calculation errors among 4th-grade students and determine whether error patterns differed as a function of problem type (addition vs. subtraction; like vs. unlike denominators), orientation (horizontal vs. vertical), or mathematics-achievement status (low- vs. average- vs. high-achieving). We…

Cooperative Health Occupation Education (Course Outline), Body Structure and Function II: 8009.09.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

GRADES OR AGES: Grade Twelve. SUBJECT MATTER: This is the second part of a two-part course on body structure and function. The subject matter includes organization, composition, and all the systems of the human body. Laboratory experiments related to first aid are also covered. ORGANIZATION AND PHYSICAL APPEARANCE: The guide contains a preface, a…

How Executive Functions Predict Development in Syntactic Complexity of Narrative Writing in the Upper Elementary Grades

ERIC Educational Resources Information Center

Drijbooms, Elise; Groen, Margriet A.; Verhoeven, Ludo

2017-01-01

The aim of this study was to examine the contribution of transcription skills, oral language skills, and executive functions to growth in narrative writing between fourth and sixth grade. While text length and story content of narratives did not increase with age, syntactic complexity of narratives showed a clear developmental progression. Results…

An Exploration of Several Structural Measurement Techniques for Usage with Functionally Graded Materials

DTIC Science & Technology

2006-12-01

Welsch, and E.W. Collings, eds. Materials Properties Handbook: Titanium Alloys . ASM International: 1994. p. 179 Davis, Joseph, ed. Properties ...AN EXPLORATION OF SEVERAL STRUCTURAL MEASUREMENT TECHNIQUES FOR USAGE WITH FUNCTIONALLY GRADED...of Defense, or the United States Government. AFIT/GAE/ENY/07-D03 AN EXPLORATION OF SEVERAL STRUCTURAL MEASUREMENT TECHNIQUES FOR USAGE WITH

A Function-Based Intervention to Increase a Second-Grade Student's On-Task Behavior in a General Education Classroom

ERIC Educational Resources Information Center

Germer, Kathryn A.; Kaplan, Lauren M.; Giroux, Lindsay N.; Markham, Elizabeth H.; Ferris, Geoffrey J.; Oakes, Wendy P.; Lane, Kathleen Lynne

2011-01-01

A functional assessment-based intervention (FABI) was designed and implemented to increase the on-task behavior of David, a second-grade student in a general education classroom. David attended an elementary school that used a comprehensive, integrated, three-tiered (CI3T) model of prevention. The school's principal nominated David for Project…

Finite element analysis of functionally graded bone plate at femur bone fracture site

NASA Astrophysics Data System (ADS)

Satapathy, Pravat Kumar; Sahoo, Bamadev; Panda, L. N.; Das, S.

2018-03-01

This paper focuses on the analysis of fractured Femur bone with functionally graded bone plate. The Femur bone is modeled by using the data from the CT (Computerized Tomography) scan and the material properties are assigned using Mimics software. The fracture fixation plate used here is composed of Functionally Graded Material (FGM). The functionally graded bone plate is considered to be composed of different layers of homogeneous materials. Finite element method approach is adopted for analysis. The volume fraction of the material is calculated by considering its variation along the thickness direction (z) according to a power law and the effective properties of the homogeneous layers are estimated. The model developed is validated by comparing numerical results available in the literature. Static analysis has been performed for the bone plate system by considering both axial compressive load and torsional load. The investigation shows that by introducing FG bone plate instead of titanium, the stress at the fracture site increases by 63 percentage and the deformation decreases by 15 percentage, especially when torsional load is taken into consideration. The present model yields better results in comparison with the commercially available bone plates.

CONSERVATIVE MANAGEMENT OF AN ISOLATED GRADE III LATERAL COLLATERAL LIGAMENT INJURY IN AN ADOLESCENT MULTI-SPORT ATHLETE: A CASE REPORT

PubMed Central

Haddad, M. Alex; Budich, Justin M.; Eckenrode, Brian J.

2016-01-01

ABSTRACT Study design Case report Background Isolated, grade III lateral collateral ligament knee injuries are an uncommon traumatic injury with little guidance available in the literature for conservative management and prognosis for return to sport. The purpose of this case report is to describe the clinical decision-making in both differential diagnosis and physical therapy management of an isolated grade III lateral collateral ligament sprain in an adolescent multi-sport high school athlete. Case Description A 16 year-old male, high school, multi-sport athlete (cross country, wrestling, track and field) sustained a traumatic knee injury during a wrestling match when his involved lower extremity was forcefully externally rotated by his opponent. Initial clinical presentation revealed pain and increased laxity with varus stress testing of the left knee, which was subsequently identified via MRI as a complete lateral collateral ligament rupture (grade III). A conservative physical therapy program was developed targeting the active and neuromuscular subsystems, theorized to compensate for the lack of an intact lateral collateral ligament. Outcomes The subject attended 18 visits of physical therapy over a period of 12 weeks. His rehabilitation program focused on functional strengthening of the posterolateral corner, enhancement of neuromuscular control, and graded progression to sports specific drills. Return to play decisions were based on a combination of lower extremity functional performance measures, condition specific outcome measures and subjective performance on sports specific tasks. At discharge from physical therapy, he reported 0/10 pain, scored a 76/80 on the Lower Extremity Functional Scale, and was able to return to competitive track and field events. Discussion Few descriptions in the literature exist for the conservative management of isolated, grade III lateral collateral ligament injuries. A program of selective functional strengthening, proprioceptive training, and graded sport specific activities may allow these individuals to return to sport with conservative management. Levels of Evidence 4 (Single Case Report) PMID:27525183

Synthesis of spatially variant lattices.

PubMed

Rumpf, Raymond C; Pazos, Javier

2012-07-02

It is often desired to functionally grade and/or spatially vary a periodic structure like a photonic crystal or metamaterial, yet no general method for doing this has been offered in the literature. A straightforward procedure is described here that allows many properties of the lattice to be spatially varied at the same time while producing a final lattice that is still smooth and continuous. Properties include unit cell orientation, lattice spacing, fill fraction, and more. This adds many degrees of freedom to a design such as spatially varying the orientation to exploit directional phenomena. The method is not a coordinate transformation technique so it can more easily produce complicated and arbitrary spatial variance. To demonstrate, the algorithm is used to synthesize a spatially variant self-collimating photonic crystal to flow a Gaussian beam around a 90° bend. The performance of the structure was confirmed through simulation and it showed virtually no scattering around the bend that would have arisen if the lattice had defects or discontinuities.

[Study on the correlation among adolescents' family function, negative life events stress amount and suicide ideation].

PubMed

Zhang, Dongdong; Chen, Ling; Yin, Dan; Miao, Jinping; Sun, Yehuan

2014-07-01

To explore the correlation between suicide ideation and family function & negative life events, as well as other influential factors in adolescents, thus present a theoretical base for clinicians and school staff to develop intervention for those problems. By adopting current situation random sampling method, Self-Rating Idea of Suicide Scale, Adolescent Self-Rating Life Events Check List and Family APGAR Index were used to assess adolescents at random in a hygiene vocational school in Changzhou City, Jiangsu Province and a collage in Wuhu City, Anhui Province. 3700 questionnaires were granted, 3675 questionnaires were collected, among which 3620 were valid. Chi-square test, t-test, and univariate logistic regression were employed in univariate analysis, multivariate logistic regression was used in multivariate analysis. The detection rate of suicide ideation is 7.0%, and the top five suicide ideation characteristics were: poor academic performance (33.6%), serious family functional impairment (25.8%), lower-middle academic performance (11.7%), bad economic conditions (10.8%) and study in Grade Three (9.9%). Multiple logistic regression showed that the following three high-level stress amount in negative life events are most crucial for suicide ideation. They are "relationships" (OR = 1.135, 95% CI 1.071 - 1. 202), "academic pressure" (OR = 1.169, 95% CI 1.101 - 1.241), and "external events" (OR = 1.278, 95% CI 1.187 - 1.376). What' s more, the stress of attending higher grades (OR = 1.980, 95% CI 1.302 - 3.008), poor academic performance (OR = 7.206, 95% CI 1.745 - 9.789), moderate family functional impairment (OR = 2.562, 95% CI 1.527 - 2.892) and its serious level (OR = 8.287, 95% CI 3.154 - 6.917) are also influential factors for suicide ideation. Severe family functional impairment and high-level stress amount of negative life events produced the main factors of suicide ideation. Therefore, necessary and sufficient support should be given to adolescents by families and schools.

Effective use of e-grading in the dental simulation clinic.

PubMed

Morrow, Jay A; Pulido, M Teresa; Smith, P Bradford; McDaniel, Thomas F; Willcox, Austin B

2014-06-01

The purpose of this article is to describe the development and implementation of a grading software system, accessible from any platform, that engages today's generation of students and replaces paper grading. Set up at one U.S. dental school in an all-access, anytime (24/7) web-based program accessed through tablets, the software allows for a comparison between students' self-grading and instructor grading. This comparison facilitates student-faculty interaction, promoting discussion and student learning. The software can also be used for practical examination grading in which blinded grading between instructors is possible. The data gathered can produce descriptive reports students can draw upon to encourage self-learning and guided learning, propelling students to a better understanding of critical principles as they progress through multiple psychomotor skill sets. Other reports generated by the software allow for instructor calibration, exporting of grades directly into the university grading report system, and visual analysis of trends within each class. In a post-course survey, students (56 percent response rate) and faculty (79 percent response rate) agreed that the electronic grading was more efficient and allowed more time for faculty-student interaction than the previous grading system, thus creating an environment more conducive to learning. Overall, the software has improved students' perception of enhanced kinetic skills, while facilitating administration of preclinical projects and practical examinations.

Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

NASA Technical Reports Server (NTRS)

Apetre, N. A.; Sankar, B. V.; Ambur, D. R.

2006-01-01

The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

Does the grading of chondromalacia patellae influence anterior knee pain following total knee arthroplasty without patellar resurfacing?

PubMed

Zha, Guo-Chun; Feng, Shuo; Chen, Xiang-Yang; Guo, Kai-Jin

2018-03-01

The influence of chondromalacia patellae (CMP) on post-operative anterior knee pain (AKP) following total knee arthroplasty (TKA) remains controversial, and few studies have focused on the relationship between them. The purpose of this study was to determine whether different CMP grades affect the incidence of AKP after TKA without patellar resurfacing. We performed a retrospective analysis of prospectively collected data on 290 TKAs with the use of the low contact stress mobile-bearing prosthesis, without patellar resurfacing in 290 patients from February 2009 to January 2013. Patients were assessed by the Outerbridge classification for CMP, visual analog scale for AKP, the Knee Society clinical scoring system of knee score (KS), function score (FS), the patellar score (PS) for clinical function, and patients' satisfaction. The intra-operative grading of CMP: grade I in 30 patients, grade II in 68 patients, grade III in 97 patients, and grade IV in 95 patients. The incidence of AKP at 36-month follow-up was 10.3% (30/290). No statistical difference was detected among the different CMP grades in terms of the incidence of AKP (p = 0.995), patients' satisfaction (p = 0.832), KS (p = 0.228), FS (p = 0.713), and PS (p = 0.119) at 36-month follow-up. The findings may suggest no relevant influence of CMP grading on the incidence of AKP after TKA without patellar resurfacing.

Recent Advances on Bioethanol Dehydration using Zeolite Membrane

NASA Astrophysics Data System (ADS)

Makertihartha, I. G. B. N.; Dharmawijaya, P. T.; Wenten, I. G.

2017-07-01

Renewable energy has gained increasing attention throughout the world. Bioethanol has the potential to replace existing fossil fuel usage without much modification in existing facilities. Bioethanol which generally produced from fermentation route produces low ethanol concentration. However, fuel grade ethanol requires low water content to avoid engine stall. Dehydration process has been increasingly important in fuel grade ethanol production. Among all dehydration processes, pervaporation is considered as the most promising technology. Zeolite possesses high potential in pervaporation of bioethanol into fuel grade ethanol. Zeolite membrane can either remove organic (ethanol) from aqueous mixture or water from the mixture, depending on the framework used. Hydrophilic zeolite membrane, e.g. LTA, can easily remove water from the mixture leaving high ethanol concentration. On the other hand, hydrophobic zeolite membrane, e.g. silicate-1, can remove ethanol from aqueous solution. This review presents the concept of bioethanol dehydration using zeolite membrane. Special attention is given to the performance of selected pathway related to framework selection.

Academic and emotional functioning in early adolescence: longitudinal relations, patterns, and prediction by experience in middle school.

PubMed

Roeser, R W; Eccles, J S; Sameroff, A J

1998-01-01

Adopting a motivational perspective on adolescent development, these two companion studies examined the longitudinal relations between early adolescents' school motivation (competence beliefs and values), achievement, emotional functioning (depressive symptoms and anger), and middle school perceptions using both variable- and person-centered analytic techniques. Data were collected from 1041 adolescents and their parents at the beginning of seventh and the end of eight grade in middle school. Controlling for demographic factors, regression analyses in Study 1 showed reciprocal relations between school motivation and positive emotional functioning over time. Furthermore, adolescents' perceptions of the middle school learning environment (support for competence and autonomy, quality of relationships with teachers) predicted their eighth grade motivation, achievement, and emotional functioning after accounting for demographic and prior adjustment measures. Cluster analyses in Study 2 revealed several different patterns of school functioning and emotional functioning during seventh grade that were stable over 2 years and that were predictably related to adolescents' reports of their middle school environment. Discussion focuses on the developmental significance of schooling for multiple adjustment outcomes during adolescence.

Career Education Program: Geneva Area City Schools. [Grade 2 Units: Postal Services, Our Homes, Clothing, Community Helpers, and Custodians In Our Lives].

ERIC Educational Resources Information Center

Geneva Area City Schools, OH.

Five curriculum units for the second grade level focus on: (1) clothing producers and suppliers, and the clothing industry; (2) postal service workers and the postal system; (3) janitorial workers; (4) workers who build, furnish, and maintain homes and the housing industry; and (5) various community workers. Behavioral unit objectives emphasize…

Analysis of Lexical Quality and Its Relation to Writing Quality for 4th Grade, Primary School Students in Chile

ERIC Educational Resources Information Center

Gómez Vera, Gabriela; Sotomayor, Carmen; Bedwell, Percy; Domínguez, Ana María; Jéldrez, Elvira

2016-01-01

Few studies have addressed vocabulary quality in developing writing skill in Spanish. Even less addressed it within the Chilean educational system. The specific objective of this study was to characterize, using a comprehensive set of indicators, the quality of the vocabulary produced by Chilean 4th grade students. Based on a national writing…

[Neurosurgical treatment of complications of intra-disk injections of triamcinolone hexacetonide. Value of a radio-clinical classification].

PubMed

Privat, J M; Finiels, P J

1997-01-01

Epidural granulomas following intra-discal injection of triamcinolone hexacetonide are a well-known complication of this procedure, which is still encountered, even if its utilization was discontinued several years ago. According to the results of their experience, the authors propose a new radio-clinical grading system: grade I: disc calcification with aspect of "sub-ligamentar hernia" on CT scan; grade II: ascendant or descendant retrosomatic migration of distal content; grade III: pseudotumoral epidural infiltrate producing progressive narrowing of the spinal canal with neurological disturbance. Surgical indications in these cases can be drawn from their evolution: posterior approach can be used, with or without laminectomy, for excision as complete as possible of the involved disc (grades I and II); anterior approach should be preferred in cases of multiples recurrences after medical treatment and failure of classical posterior approach, or in case of necrotico-inflammatory proliferation with narrowing of the spinal canal (grade III).

No correlation between ultrasound placental grading at 31-34 weeks of gestation and a surrogate estimate of organ function at term obtained by stereological analysis.

PubMed

Yin, T T; Loughna, P; Ong, S S; Padfield, J; Mayhew, T M

2009-08-01

We test the experimental hypothesis that early changes in the ultrasound appearance of the placenta reflect poor or reduced placental function. The sonographic (Grannum) grade of placental maturity was compared to placental function as expressed by the morphometric oxygen diffusive conductance of the villous membrane. Ultrasonography was used to assess the Grannum grade of 32 placentas at 31-34 weeks of gestation. Indications for the scans included a history of previous fetal abnormalities, previous fetal growth problems or suspicion of IUGR. Placentas were classified from grade 0 (most immature) to grade III (most mature). We did not exclude smokers or complicated pregnancies as we aimed to correlate the early appearance of mature placentas with placental function. After delivery, microscopical fields on formalin-fixed, trichrome-stained histological sections of each placenta were obtained by multistage systematic uniform random sampling. Using design-based stereological methods, the exchange surface areas of peripheral (terminal and intermediate) villi and their fetal capillaries and the arithmetic and harmonic mean thicknesses of the villous membrane (maternal surface of villous trophoblast to adluminal surface of vascular endothelium) were estimated. An index of the variability in thickness of this membrane, and an estimate of its oxygen diffusive conductance, were derived secondarily as were estimates of the mean diameters and total lengths of villi and fetal capillaries. Group comparisons were drawn using analysis of variance. We found no significant differences in placental volume or composition or in the dimensions or diffusive conductances of the villous membrane. Subsequent exclusion of smokers did not alter these main findings. Grannum grades at 31-34 weeks of gestation appear not to provide reliable predictors of the functional capacity of the term placenta as expressed by the surrogate measure, morphometric diffusive conductance.

Outcomes of Patellofemoral Arthroplasty Based on Radiographic Severity.

PubMed

deDeugd, Casey M; Pareek, Ayoosh; Krych, Aaron J; Cummings, Nancy M; Dahm, Diane L

2017-04-01

Patellofemoral arthroplasty (PFA) is increasingly performed for symptomatic patellofemoral arthritis. The purpose of this study was to evaluate the outcomes of PFA based on preoperative radiographic severity of patellofemoral arthritis. All patients who underwent PFA for isolated patellofemoral arthritis between 2002 and 2013 and had undergone preoperative magnetic resonance imaging were identified. Radiographic severity of patellofemoral arthritis was classified according to the Iwano classification system. Groups were divided between mild (grade 0-I) and moderate to severe (grade II-IV) patellofemoral arthritis. Clinical outcomes were evaluated using the Knee Society scores (KSS), University of California at Los Angeles (UCLA) and Tegner scores. Seventy-five knees in 55 patients met inclusion criteria. Mean age was 51 years (range, 36 to 81), and mean follow-up was 3 years (range, 2 to 10). All patients had grade IV patellofemoral chondromalacia and/or significant subchondral cyst formation and edema on magnetic resonance imaging. On plain radiographs, there were no patients with Iwano grade 0, 21 grade I, 15 grade II, 21 grade III, and 18 grade IV patellofemoral arthritis. There was significantly more improvement in KSS pain (P = .046), KSS function (P = .02), University of California at Los Angeles (UCLA) (P = .046) and Tegner (P = .008) scores in the Iwano grade II-IV group vs the Iwano grade I group. Patient-reported pain quality improved significantly more following PFA in the grade II-IV group (P = .04). Patients with evidence of mild patellofemoral arthritis on plain radiographs demonstrated less improvement in pain and function after PFA than those with more advanced patellofemoral arthritis. Caution should be used when considering PFA for patients with minimal radiographic evidence of patellofemoral arthritis. Copyright © 2016 Elsevier Inc. All rights reserved.

Monte Carlo simulations of product distributions and contained metal estimates

USGS Publications Warehouse

Gettings, Mark E.

2013-01-01

Estimation of product distributions of two factors was simulated by conventional Monte Carlo techniques using factor distributions that were independent (uncorrelated). Several simulations using uniform distributions of factors show that the product distribution has a central peak approximately centered at the product of the medians of the factor distributions. Factor distributions that are peaked, such as Gaussian (normal) produce an even more peaked product distribution. Piecewise analytic solutions can be obtained for independent factor distributions and yield insight into the properties of the product distribution. As an example, porphyry copper grades and tonnages are now available in at least one public database and their distributions were analyzed. Although both grade and tonnage can be approximated with lognormal distributions, they are not exactly fit by them. The grade shows some nonlinear correlation with tonnage for the published database. Sampling by deposit from available databases of grade, tonnage, and geological details of each deposit specifies both grade and tonnage for that deposit. Any correlation between grade and tonnage is then preserved and the observed distribution of grades and tonnages can be used with no assumption of distribution form.

Production of carbon monoxide-free hydrogen and helium from a high-purity source

DOEpatents

Golden, Timothy Christopher [Allentown, PA; Farris, Thomas Stephen [Bethlehem, PA

2008-11-18

The invention provides vacuum swing adsorption processes that produce an essentially carbon monoxide-free hydrogen or helium gas stream from, respectively, a high-purity (e.g., pipeline grade) hydrogen or helium gas stream using one or two adsorber beds. By using physical adsorbents with high heats of nitrogen adsorption, intermediate heats of carbon monoxide adsorption, and low heats of hydrogen and helium adsorption, and by using vacuum purging and high feed stream pressures (e.g., pressures of as high as around 1,000 bar), pipeline grade hydrogen or helium can purified to produce essentially carbon monoxide -free hydrogen and helium, or carbon monoxide, nitrogen, and methane-free hydrogen and helium.

Effects of Long Term Thermal Exposure on Chemically Pure (CP) Titanium Grade 2 Room Temperature Tensile Properties and Microstructure

NASA Technical Reports Server (NTRS)

Ellis, David L.

2007-01-01

Room temperature tensile testing of Chemically Pure (CP) Titanium Grade 2 was conducted for as-received commercially produced sheet and following thermal exposure at 550 and 650 K for times up to 5,000 h. No significant changes in microstructure or failure mechanism were observed. A statistical analysis of the data was performed. Small statistical differences were found, but all properties were well above minimum values for CP Ti Grade 2 as defined by ASTM standards and likely would fall within normal variation of the material.

Research and Development of Micro-Alloying High-Strength Shipbuilding Plate

NASA Astrophysics Data System (ADS)

Chen, Zhenye

Based on the technological requirements and market demand, Nb micro-alloying D36 grade high strength shipbuilding plate has been successfully developed in HBIS. In this papers, the rational chemical compositions design, smelting and rolling process of Nb micro-alloying D36 grade high strength shipbuilding plate were introduced. Its various performance figures not only comply with the rules of nine classification societies of CCS, LR, ABS NK, DNV, BV, GL, KR and RINA but meet users' requirements. It indicates that HBIS have capacity producing Nb micro-alloying D36 grade high strength shipbuilding plate.

The F'derik-Zouerate iron district: Mesoarchean and Paleoproterozoic iron formation of the Tiris Complex, Islamic Republic of Mauritania

USGS Publications Warehouse

Taylor, Cliff D.; Finn, Carol A.; Anderson, Eric D.; Bradley, Dwight C.; Joud, Mohamed; Taleb Mohamed, Ahmed; Horton, John D.; Johnson, Craig A.; Bouabdellah, Mohammed; Slack, John F.

2016-01-01

High-grade hematitic iron ores (of HIF, containing 60-65 wt%Fe) have been mined in Mauritania since 1952 from Superior-type iron deposits of the F'derik-Zouerate district.  Depletion of the high-grade ores in recent years has resulted in new exploration projects focused on lower-grade magnetite ores occurring in Algoma-type banded iron formation (of BIF, containing ca. 35 wt% Fe).  Mauritania is the seventeenth largest iron producer in the world and currently has about 1.1 Gt of crude iron ore reserves. 

Nanoscale Graphene Disk: A Natural Functionally Graded Material–How is Fourier’s Law Violated along Radius Direction of 2D Disk

PubMed Central

Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen

2015-01-01

In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier’s law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs’ thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity. PMID:26443206

miR-215 functions as an oncogene in high-grade glioma by regulating retinoblastoma 1.

PubMed

Meng, Xiaofeng; Shi, Baozhong

2017-09-01

To investigate the roles of miR-215 in high-grade glioma and to clarify the regulation of retinoblastoma 1 (RB1) by miR-215. miR-215 is frequently up-regulated in high-grade glioma tissues. Increased miR-215 expression is significantly associated with World Health Organization grade (P < 0.01) tumor size (P < 0.05) and poor prognosis (P < 0.01). Over-expression of miR-215 promoted cell proliferation and knockdown of miR-215 inhibited cell proliferation in vitro. RB1 was identified as a direct and functional target of miR-215. RB1 is generally down-regulated in glioma tissues and its expression inversely correlated with miR-215, which is up-regulated in high-grade glioma tissues, and its expression was negatively correlated with miR-215. The new miR-215/RB1 axis provides new insights into the molecular mechanism and treatment for glioma.

Nanoscale Graphene Disk: A Natural Functionally Graded Material-How is Fourier's Law Violated along Radius Direction of 2D Disk.

PubMed

Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen

2015-10-07

In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier's law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs' thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity.

Junior High School Science: A Manual for Teachers. A Search for Structure. Grade 7.

ERIC Educational Resources Information Center

Baltimore County Public Schools, Towson, MD.

GRADES OR AGES: Grade 7. SUBJECT MATTER: Science. ORGANIZATION AND PHYSICAL APPEARANCE: The introduction describes the development of the junior high school science program. The main text is divided into three phases: Processes and Skills, Developing a Model of Matter, and Human Structure and Function. Phase I contains two subcategories: Rocks and…

Does It Say That? Tensions in Teacher Questions When the Text Has the Final Say

ERIC Educational Resources Information Center

Boelé, Amy L.

2017-01-01

Using sociocultural concepts of authoritative and dialogic discourse, I sought to examine 5th-grade teachers' questioning practices during small-group reading instruction to understand the differences between groups reading text on grade level and groups reading texts below grade level. The purpose was also to examine how questions functioned for…

Population Problems, Teacher's Guide. Environmental Education Unit, Twelfth Grade Sociology.

ERIC Educational Resources Information Center

Little Rock School District, AR.

Human population growth and the implications of increasing population on the well-being of men and nations is examined in this twelfth grade curriculum guide which is part of a series for grades 4 through 12. The primary functions of the unit are to introduce the student to reasons for population growth, results of overextended populations, and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chance, William W.; Rice, David C.; Allen, Pamela K.

Purpose: To investigate safety, efficacy, and recurrence after hemithoracic intensity modulated radiation therapy after pleurectomy/decortication (PD-IMRT) and after extrapleural pneumonectomy (EPP-IMRT). Methods and Materials: In 2009-2013, 24 patients with mesothelioma underwent PD-IMRT to the involved hemithorax to a dose of 45 Gy, with an optional integrated boost; 22 also received chemotherapy. Toxicity was scored with the Common Terminology Criteria for Adverse Events v4.0. Pulmonary function was compared at baseline, after surgery, and after IMRT. Kaplan-Meier analysis was used to calculate overall survival (OS), progression-free survival (PFS), time to locoregional failure, and time to distant metastasis. Failures were in-field, marginal, or outmore » of field. Outcomes were compared with those of 24 patients, matched for age, nodal status, performance status, and chemotherapy, who had received EPP-IMRT. Results: Median follow-up time was 12.2 months. Grade 3 toxicity rates were 8% skin and 8% pulmonary. Pulmonary function declined from baseline to after surgery (by 21% for forced vital capacity, 16% for forced expiratory volume in 1 second, and 19% for lung diffusion of carbon monoxide [P for all = .01]) and declined still further after IMRT (by 31% for forced vital capacity [P=.02], 25% for forced expiratory volume in 1 second [P=.01], and 30% for lung diffusion of carbon monoxide [P=.01]). The OS and PFS rates were 76% and 67%, respectively, at 1 year and 56% and 34% at 2 years. Median OS (28.4 vs 14.2 months, P=.04) and median PFS (16.4 vs 8.2 months, P=.01) favored PD-IMRT versus EPP-IMRT. No differences were found in grade 4-5 toxicity (0 of 24 vs 3 of 24, P=.23), median time to locoregional failure (18.7 months vs not reached, P not calculable), or median time to distant metastasis (18.8 vs 11.8 months, P=.12). Conclusions: Hemithoracic intensity modulated radiation therapy after pleurectomy/decortication produced little high-grade toxicity but led to progressive declines in pulmonary function; OS and PFS were better in PD-IMRT compared with EPP-IMRT.« less

Hemithoracic intensity modulated radiation therapy after pleurectomy/decortication for malignant pleural mesothelioma: toxicity, patterns of failure, and a matched survival analysis.

PubMed

Chance, William W; Rice, David C; Allen, Pamela K; Tsao, Anne S; Fontanilla, Hiral P; Liao, Zhongxing; Chang, Joe Y; Tang, Chad; Pan, Hubert Y; Welsh, James W; Mehran, Reza J; Gomez, Daniel R

2015-01-01

To investigate safety, efficacy, and recurrence after hemithoracic intensity modulated radiation therapy after pleurectomy/decortication (PD-IMRT) and after extrapleural pneumonectomy (EPP-IMRT). In 2009-2013, 24 patients with mesothelioma underwent PD-IMRT to the involved hemithorax to a dose of 45 Gy, with an optional integrated boost; 22 also received chemotherapy. Toxicity was scored with the Common Terminology Criteria for Adverse Events v4.0. Pulmonary function was compared at baseline, after surgery, and after IMRT. Kaplan-Meier analysis was used to calculate overall survival (OS), progression-free survival (PFS), time to locoregional failure, and time to distant metastasis. Failures were in-field, marginal, or out of field. Outcomes were compared with those of 24 patients, matched for age, nodal status, performance status, and chemotherapy, who had received EPP-IMRT. Median follow-up time was 12.2 months. Grade 3 toxicity rates were 8% skin and 8% pulmonary. Pulmonary function declined from baseline to after surgery (by 21% for forced vital capacity, 16% for forced expiratory volume in 1 second, and 19% for lung diffusion of carbon monoxide [P for all = .01]) and declined still further after IMRT (by 31% for forced vital capacity [P=.02], 25% for forced expiratory volume in 1 second [P=.01], and 30% for lung diffusion of carbon monoxide [P=.01]). The OS and PFS rates were 76% and 67%, respectively, at 1 year and 56% and 34% at 2 years. Median OS (28.4 vs 14.2 months, P=.04) and median PFS (16.4 vs 8.2 months, P=.01) favored PD-IMRT versus EPP-IMRT. No differences were found in grade 4-5 toxicity (0 of 24 vs 3 of 24, P=.23), median time to locoregional failure (18.7 months vs not reached, P not calculable), or median time to distant metastasis (18.8 vs 11.8 months, P=.12). Hemithoracic intensity modulated radiation therapy after pleurectomy/decortication produced little high-grade toxicity but led to progressive declines in pulmonary function; OS and PFS were better in PD-IMRT compared with EPP-IMRT. Copyright © 2015 Elsevier Inc. All rights reserved.

Normative Functional Performance Values in High School Athletes: The Functional Pre-Participation Evaluation Project.

PubMed

Onate, James A; Starkel, Cambrie; Clifton, Daniel R; Best, Thomas M; Borchers, James; Chaudhari, Ajit; Comstock, R Dawn; Cortes, Nelson; Grooms, Dustin R; Hertel, Jay; Hewett, Timothy E; Miller, Meghan Maume; Pan, Xueliang; Schussler, Eric; Van Lunen, Bonnie L

2018-01-01

  The fourth edition of the Preparticipation Physical Evaluation recommends functional testing for the musculoskeletal portion of the examination; however, normative data across sex and grade level are limited. Establishing normative data can provide clinicians reference points with which to compare their patients, potentially aiding in the development of future injury-risk assessments and injury-mitigation programs.   To establish normative functional performance and limb-symmetry data for high school-aged male and female athletes in the United States.   Cross-sectional study.   Athletic training facilities and gymnasiums across the United States.   A total of 3951 male and female athletes who participated on high school-sponsored basketball, football, lacrosse, or soccer teams enrolled in this nationwide study.   Functional performance testing consisted of 3 evaluations. Ankle-joint range of motion, balance, and lower extremity muscular power and landing control were assessed via the weight-bearing ankle-dorsiflexion-lunge, single-legged anterior-reach, and anterior single-legged hop-for-distance (SLHOP) tests, respectively. We used 2-way analyses of variance and χ 2 analyses to examine the effects of sex and grade level on ankle-dorsiflexion-lunge, single-legged anterior-reach, and SLHOP test performance and symmetry.   The SLHOP performance differed between sexes (males = 187.8% ± 33.1% of limb length, females = 157.5% ± 27.8% of limb length; t = 30.3, P < .001). A Cohen d value of 0.97 indicated a large effect of sex on SLHOP performance. We observed differences for SLHOP and ankle-dorsiflexion-lunge performance among grade levels, but these differences were not clinically meaningful.   We demonstrated differences in normative data for lower extremity functional performance during preparticipation physical evaluations across sex and grade levels. The results of this study will allow clinicians to compare sex- and grade-specific functional performances and implement approaches for preventing musculoskeletal injuries in high school-aged athletes.

Automatized image processing of bovine blastocysts produced in vitro for quantitative variable determination

NASA Astrophysics Data System (ADS)

Rocha, José Celso; Passalia, Felipe José; Matos, Felipe Delestro; Takahashi, Maria Beatriz; Maserati, Marc Peter, Jr.; Alves, Mayra Fernanda; de Almeida, Tamie Guibu; Cardoso, Bruna Lopes; Basso, Andrea Cristina; Nogueira, Marcelo Fábio Gouveia

2017-12-01

There is currently no objective, real-time and non-invasive method for evaluating the quality of mammalian embryos. In this study, we processed images of in vitro produced bovine blastocysts to obtain a deeper comprehension of the embryonic morphological aspects that are related to the standard evaluation of blastocysts. Information was extracted from 482 digital images of blastocysts. The resulting imaging data were individually evaluated by three experienced embryologists who graded their quality. To avoid evaluation bias, each image was related to the modal value of the evaluations. Automated image processing produced 36 quantitative variables for each image. The images, the modal and individual quality grades, and the variables extracted could potentially be used in the development of artificial intelligence techniques (e.g., evolutionary algorithms and artificial neural networks), multivariate modelling and the study of defined structures of the whole blastocyst.

Rapid, simple and inexpensive production of custom 3D printed equipment for large-volume fluorescence microscopy

PubMed Central

Tyson, Adam L.; Hilton, Stephen T.; Andreae, Laura C.

2015-01-01

The cost of 3D printing has reduced dramatically over the last few years and is now within reach of many scientific laboratories. This work presents an example of how 3D printing can be applied to the development of custom laboratory equipment that is specifically adapted for use with the novel brain tissue clearing technique, CLARITY. A simple, freely available online software tool was used, along with consumer-grade equipment, to produce a brain slicing chamber and a combined antibody staining and imaging chamber. Using standard 3D printers we were able to produce research-grade parts in an iterative manner at a fraction of the cost of commercial equipment. 3D printing provides a reproducible, flexible, simple and cost-effective method for researchers to produce the equipment needed to quickly adopt new methods. PMID:25797056

Tricuspid regurgitation and right ventricular function after mitral valve surgery with or without concomitant tricuspid valve procedure.

PubMed

Desai, Ravi R; Vargas Abello, Lina Maria; Klein, Allan L; Marwick, Thomas H; Krasuski, Richard A; Ye, Ying; Nowicki, Edward R; Rajeswaran, Jeevanantham; Blackstone, Eugene H; Pettersson, Gösta B

2013-11-01

To study the effect of mitral valve repair with or without concomitant tricuspid valve repair on functional tricuspid regurgitation and right ventricular function. From 2001 to 2007, 1833 patients with degenerative mitral valve disease, a structurally normal tricuspid valve, and no coronary artery disease underwent mitral valve repair, and 67 underwent concomitant tricuspid valve repair. Right ventricular function (myocardial performance index and tricuspid annular plane systolic excursion) was measured before and after surgery using transthoracic echocardiography for randomly selected patients with tricuspid regurgitation grade 0, 1+, and 2+ (100 patients for each grade) and 93 with grade 3+/4+, 393 patients in total. In patients with mild (<3+) preoperative tricuspid regurgitation, mitral valve repair alone was associated with reduced tricuspid regurgitation and mild worsening of right ventricular function. Tricuspid regurgitation of 2+ or greater developed in fewer than 20%, and right ventricular function had improved, but not to preoperative levels, at 3 years. In patients with severe (3+/4+) preoperative tricuspid regurgitation, mitral valve repair alone reduced tricuspid regurgitation and improved right ventricular function; however, tricuspid regurgitation of 2+ or greater returned and right ventricular function worsened toward preoperative levels within 3 years. Concomitant tricuspid valve repair effectively eliminated severe tricuspid regurgitation and improved right ventricular function. Also, over time, tricuspid regurgitation did not return and right ventricular function continued to improve to levels comparable to that of patients with lower grades of preoperative tricuspid regurgitation. In patients with mitral valve disease and severe tricuspid regurgitation, mitral valve repair alone was associated with improved tricuspid regurgitation and right ventricular function. However, the improvements were incomplete and temporary. In contrast, concomitant tricuspid valve repair effectively and durably eliminated severe tricuspid regurgitation and improved right ventricular function toward normal, supporting an aggressive approach to important functional tricuspid regurgitation. Copyright © 2013 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Tricuspid regurgitation and right ventricular function after mitral valve surgery with or without concomitant tricuspid valve procedure

PubMed Central

Desai, Ravi R.; Vargas Abello, Lina Maria; Klein, Allan L.; Marwick, Thomas H.; Krasuski, Richard A.; Ye, Ying; Nowicki, Edward R.; Rajeswaran, Jeevanantham; Blackstone, Eugene H.; Pettersson, Gösta B.

2014-01-01

Objectives To study the effect of mitral valve repair with or without concomitant tricuspid valve repair on functional tricuspid regurgitation and right ventricular function. Methods From 2001 to 2007, 1833 patients with degenerative mitral valve disease, a structurally normal tricuspid valve, and no coronary artery disease underwent mitral valve repair, and 67 underwent concomitant tricuspid valve repair. Right ventricular function (myocardial performance index and tricuspid annular plane systolic excursion) was measured before and after surgery using transthoracic echocardiography for randomly selected patients with tricuspid regurgitation grade 0, 1+, and 2+(100 patients for each grade) and 93 with grade 3+/4+, 393 patients in total. Results In patients with mild (<3+) preoperative tricuspid regurgitation, mitral valve repair alone was associated with reduced tricuspid regurgitation and mild worsening of right ventricular function. Tricuspid regurgitation of 2+or greater developed in fewer than 20%, and right ventricular function had improved, but not to preoperative levels, at 3 years. In patients with severe (3+/4+) preoperative tricuspid regurgitation, mitral valve repair alone reduced tricuspid regurgitation and improved right ventricular function; however, tricuspid regurgitation of 2+ or greater returned and right ventricular function worsened toward preoperative levels within 3 years. Concomitant tricuspid valve repair effectively eliminated severe tricuspid regurgitation and improved right ventricular function. Also, over time, tricuspid regurgitation did not return and right ventricular function continued to improve to levels comparable to that of patients with lower grades of preoperative tricuspid regurgitation. Conclusions In patients with mitral valve disease and severe tricuspid regurgitation, mitral valve repair alone was associated with improved tricuspid regurgitation and right ventricular function. However, the improvements were incomplete and temporary. In contrast, concomitant tricuspid valve repair effectively and durably eliminated severe tricuspid regurgitation and improved right ventricular function toward normal, supporting an aggressive approach to important functional tricuspid regurgitation. PMID:23010580

Lumber grades from young-growth Douglas-fir.

Treesearch

E.E. Matson

1952-01-01

Young Douglas-fir timber is known to produce much No. 1 Common and Better lumber but, little or no clear lumber. The volume of lumber produced from young-growth timber has become a sizable part of the cut from the Douglas-fir region of Oregon and Washington. No exact figures are available, but it is estimated that more than one-fourth of the lumber produced from this...

Critters: K-6 Life Science Activities. Project AIMS.

ERIC Educational Resources Information Center

Allen, Maureen Murphy; And Others

Project AIMS (Activities to Integrate Mathematics and Science) has as its purpose the integration of subject matter in grades K-9. Field testing of the curriculum materials produced by AIMS indicates that this integration produces the following beneficial results: (1) mathematics becomes more meaningful, hence more useful; (2) science is…

Characterization of the Morphology of RDX Particles Formed by Laser Ablation

DTIC Science & Technology

2012-02-01

military-grade RDX can contain significant amounts of HMX (up to 5% for type-I RDX produced by direct nitration with the Woolwich process and up to...potentially produce RDX particles with specific morphologies in support of microstructural experiments for the Multiscale Response of Energetic

Grade classification of neuroepithelial tumors using high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy and pattern recognition.

PubMed

Chen, WenXue; Lou, HaiYan; Zhang, HongPing; Nie, Xiu; Lan, WenXian; Yang, YongXia; Xiang, Yun; Qi, JianPin; Lei, Hao; Tang, HuiRu; Chen, FenEr; Deng, Feng

2011-07-01

Clinical data have shown that survival rates vary considerably among brain tumor patients, according to the type and grade of the tumor. Metabolite profiles of intact tumor tissues measured with high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy (HRMAS (1)H NMRS) can provide important information on tumor biology and metabolism. These metabolic fingerprints can then be used for tumor classification and grading, with great potential value for tumor diagnosis. We studied the metabolic characteristics of 30 neuroepithelial tumor biopsies, including two astrocytomas (grade I), 12 astrocytomas (grade II), eight anaplastic astrocytomas (grade III), three glioblastomas (grade IV) and five medulloblastomas (grade IV) from 30 patients using HRMAS (1)H NMRS. The results were correlated with pathological features using multivariate data analysis, including principal component analysis (PCA). There were significant differences in the levels of N-acetyl-aspartate (NAA), creatine, myo-inositol, glycine and lactate between tumors of different grades (P<0.05). There were also significant differences in the ratios of NAA/creatine, lactate/creatine, myo-inositol/creatine, glycine/creatine, scyllo-inositol/creatine and alanine/creatine (P<0.05). A soft independent modeling of class analogy model produced a predictive accuracy of 87% for high-grade (grade III-IV) brain tumors with a sensitivity of 87% and a specificity of 93%. HRMAS (1)H NMR spectroscopy in conjunction with pattern recognition thus provides a potentially useful tool for the rapid and accurate classification of human brain tumor grades.

Effect of ionization suppression by trace impurities in mobile phase water on the accuracy of quantification by high-performance liquid chromatography/mass spectrometry.

PubMed

Herath, H M D R; Shaw, P N; Cabot, P; Hewavitharana, A K

2010-06-15

The high-performance liquid chromatography (HPLC) column is capable of enrichment/pre-concentration of trace impurities in the mobile phase during the column equilibration, prior to sample injection and elution. These impurities elute during gradient elution and result in significant chromatographic peaks. Three types of purified water were tested for their impurity levels, and hence their performances as mobile phase, in HPLC followed by total ion current (TIC) mode of MS. Two types of HPLC-grade water produced 3-4 significant peaks in solvent blanks while LC/MS-grade water produced no peaks (although peaks were produced by LC/MS-grade water also after a few days of standing). None of the three waters produced peaks in HPLC followed by UV-Vis detection. These peaks, if co-eluted with analyte, are capable of suppressing or enhancing the analyte signal in a MS detector. As it is not common practice to run solvent blanks in TIC mode, when quantification is commonly carried out using single ion monitoring (SIM) or single or multiple reaction monitoring (SRM or MRM), the effect of co-eluting impurities on the analyte signal and hence on the accuracy of the results is often unknown to the analyst. Running solvent blanks in TIC mode, regardless of the MS mode used for quantification, is essential in order to detect this problem and to take subsequent precautions. Copyright (c) 2010 John Wiley & Sons, Ltd.

Lexile Reading Growth as a Function of Starting Level in At-Risk Middle School Students

ERIC Educational Resources Information Center

Archer, Laura E.

2010-01-01

This study investigated average yearly reading growth norms of at-risk middle school students as a function of start of year reading grade level. Data for this study were collected from an urban school in the western United States over five years and tracked the yearly growth of 2,485 seventh- and eighth-grade students using a Lexile-linked…

The Functions and Benefits of the ePortfolio in Craft Education at the Primary Level

ERIC Educational Resources Information Center

Saarinen, Auli; Seitamaa-Hakkarainen, Pirita; Hakkarainen, Kai

2016-01-01

The authors investigated primary school pupils' experiences using an electronic portfolio in their craft education for a three year period, from the 3rd grade until the end of the 5th grade. This article emphasizes the functions and the benefits of the ePortfolio method and outlines general user experiences based on pupil interviews (N = 38),…

Awake surgery for hemispheric low-grade gliomas: oncological, functional and methodological differences between pediatric and adult populations.

PubMed

Trevisi, Gianluca; Roujeau, Thomas; Duffau, Hugues

2016-10-01

Brain mapping through a direct cortical and subcortical electrical stimulation during an awake craniotomy has gained an increasing popularity as a powerful tool to prevent neurological deficit while increasing extent of resection of hemispheric diffuse low-grade gliomas in adults. However, few case reports or very limited series of awake surgery in children are currently available in the literature. In this paper, we review the oncological and functional differences between pediatric and adult populations, and the methodological specificities that may limit the use of awake mapping in pediatric low-grade glioma surgery. This could be explained by the fact that pediatric low-grade gliomas have a different epidemiology and biologic behavior in comparison to adults, with pilocytic astrocytomas (WHO grade I glioma) as the most frequent histotype, and with WHO grade II gliomas less prone to anaplastic transformation than their adult counterparts. In addition, aside from the issue of poor collaboration of younger children under 10 years of age, some anatomical and functional peculiarities of children developing brain (cortical and subcortical myelination, maturation of neural networks and of specialized cortical areas) can influence direct electrical stimulation methodology and sensitivity, limiting its use in children. Therefore, even though awake procedure with cortical and axonal stimulation mapping can be adapted in a specific subgroup of children with a diffuse glioma from the age of 10 years, only few pediatric patients are nonetheless candidates for awake brain surgery.

Surface modification of platinum by laser-produced X-rays

NASA Astrophysics Data System (ADS)

Latif, Hamid; Shahid Rafique, M.; Khaleeq-ur-Rahaman, M.; Sattar, Abdul; Anjum, S.; Usman, A.; Zaheer, S.; Rawat, R. S.

2014-11-01

Laser-induced plasma is used as an X-ray source for the growth of hillocks like nanostructures on platinum surface. To generate X-rays, plasma is produced by Nd:YAG laser, which is operated at second harmonics (λ = 532 nm, E = 400 mJ). Analytical grade 5 N pure Al, Cu and W are used as laser targets for X-rays production. X-rays produced from Al, Cu and W plasmas are used to irradiate three analytical grade (5 N pure) platinum substrates, respectively, under the vacuum ∼10-4 torr. XRD analysis shows considerable structural changes in the exposed platinum. The decrement in reflection intensities, increment in dislocation line density, change in d-spacing and disturbance in the periodicity of planes evidently prove these structural changes. Atomic force microscope AFM topographic analysis of the platinum exposed to X-rays emitted from Al, Cu and W targets showed that nanometer-size hillocks are produced on the platinum surface irrespective of the source. It has also been observed that due to these hillocks, the roughness of the surface has increased. Conductivity of hillocks produced from X-rays produced by Al, Cu and W targets is compared and it is shown that the hillocks produced by Al target X-rays have better conductivity compared to the hillocks produced by X-rays from Cu and W targets.

The Effects of Perceived Quality on Behavioral Economic Demand for Marijuana: A Web-Based Experiment

PubMed Central

Vincent, Paula C.; Collins, R. Lorraine; Liu, Liu; Yu, Jihnhee; De Leo, Joseph A.; Earleywine, Mitch

2016-01-01

Background Given the growing legalization of recreational marijuana use and related increase in its prevalence in the United States, it is important to understand marijuana's appeal. We used a behavioral economic (BE) approach to examine whether the reinforcing properties of marijuana, including “demand” for marijuana, varied as a function of its perceived quality. Methods Using an innovative, Web-based marijuana purchase task (MPT), a sample of 683 young-adult recreational marijuana users made hypothetical purchases of marijuana across three qualities (low, mid and high grade) at nine escalating prices per joint, ranging from $0/free to $20. Results We used nonlinear mixed effects modeling to conduct demand curve analyses, which produced separate demand indices (e.g., Pmax, elasticity) for each grade of marijuana. Consistent with previous research, as the price of marijuana increased, marijuana users reduced their purchasing. Demand also was sensitive to quality, with users willing to pay more for higher quality/grade marijuana. In regression analyses, demand indices accounted for significant variance in typical marijuana use. Conclusions This study illustrates the value of applying BE theory to young adult marijuana use. It extends past research by examining how perceived quality affects demand for marijuana and provides support for the validity of a Web-based MPT to examine the appeal of marijuana. Our results have implications for policies to regulate marijuana use, including taxation based on the quality of different marijuana products. PMID:27951424

The effects of perceived quality on behavioral economic demand for marijuana: A web-based experiment.

PubMed

Vincent, Paula C; Collins, R Lorraine; Liu, Liu; Yu, Jihnhee; De Leo, Joseph A; Earleywine, Mitch

2017-01-01

Given the growing legalization of recreational marijuana use and related increase in its prevalence in the United States, it is important to understand marijuana's appeal. We used a behavioral economic (BE) approach to examine whether the reinforcing properties of marijuana, including "demand" for marijuana, varied as a function of its perceived quality. Using an innovative, Web-based marijuana purchase task (MPT), a sample of 683 young-adult recreational marijuana users made hypothetical purchases of marijuana across three qualities (low, mid and high grade) at nine escalating prices per joint, ranging from $0/free to $20. We used nonlinear mixed effects modeling to conduct demand curve analyses, which produced separate demand indices (e.g., P max , elasticity) for each grade of marijuana. Consistent with previous research, as the price of marijuana increased, marijuana users reduced their purchasing. Demand also was sensitive to quality, with users willing to pay more for higher quality/grade marijuana. In regression analyses, demand indices accounted for significant variance in typical marijuana use. This study illustrates the value of applying BE theory to young adult marijuana use. It extends past research by examining how perceived quality affects demand for marijuana and provides support for the validity of a Web-based MPT to examine the appeal of marijuana. Our results have implications for policies to regulate marijuana use, including taxation based on the quality of different marijuana products. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Computer-Aided Grading of Lymphangioleiomyomatosis (LAM) using HRCT

PubMed Central

Yao, Jianhua; Avila, Nilo; Dwyer, Andrew; Taveira-DaSilva, Angelo M.; Hathaway, Olanda M.; Moss, Joel

2010-01-01

Lymphangioleiomyomatosis (LAM) is a multisystem disorder associated with proliferation of smooth muscle-like cells, which leads to destruction of lung parenchyma. Subjective grading of LAM on HRCT is imprecise and can be arduous especially in cases with severe involvement. We propose a computer-aided evaluation system that grades LAM involvement based on analysis of lung texture patterns. A committee of support vector machines is employed for classification. The system was tested on 36 patients. The computer grade demonstrates good correlation with subjective radiologist grade (R=0.91, p<0.0001) and pulmonary functional tests (R=0.85, p<0.0001). The grade also provides precise progression assessment of disease over time. PMID:21625320

Noise in Attractor Networks in the Brain Produced by Graded Firing Rate Representations

PubMed Central

Webb, Tristan J.; Rolls, Edmund T.; Deco, Gustavo; Feng, Jianfeng

2011-01-01

Representations in the cortex are often distributed with graded firing rates in the neuronal populations. The firing rate probability distribution of each neuron to a set of stimuli is often exponential or gamma. In processes in the brain, such as decision-making, that are influenced by the noise produced by the close to random spike timings of each neuron for a given mean rate, the noise with this graded type of representation may be larger than with the binary firing rate distribution that is usually investigated. In integrate-and-fire simulations of an attractor decision-making network, we show that the noise is indeed greater for a given sparseness of the representation for graded, exponential, than for binary firing rate distributions. The greater noise was measured by faster escaping times from the spontaneous firing rate state when the decision cues are applied, and this corresponds to faster decision or reaction times. The greater noise was also evident as less stability of the spontaneous firing state before the decision cues are applied. The implication is that spiking-related noise will continue to be a factor that influences processes such as decision-making, signal detection, short-term memory, and memory recall even with the quite large networks found in the cerebral cortex. In these networks there are several thousand recurrent collateral synapses onto each neuron. The greater noise with graded firing rate distributions has the advantage that it can increase the speed of operation of cortical circuitry. PMID:21931607

Effect of dietary marine lipids on female white bass ova compositions and progeny survival.

PubMed

Lewis, H A; Trushenski, J T; Lane, R L; Kohler, C C

2010-12-01

We evaluated white bass ovum fatty acid composition as well as embryonic and larval survival after varying n-3 and n-6 long-chain polyunsaturated fatty acid (LC-PUFA) concentrations in maternal diets. Diets containing graded levels (0, 33, 66, or 100%) of squid to menhaden oils were fed daily to apparent satiation to female white bass for 8 weeks prior to spawning. Embryonic survival was negatively related to maternal squid oil intake (P=0.015, R2=0.970). Squid oil-fed broodstock produced ova with decreased 20:5n-3 and increased C18 polyunsaturated fatty acid concentrations, largely reflecting the fatty acid profile of squid oil. Within ovum phospholipid, accumulation of 18:2n-6 may have altered biological function resulting in the lower embryonic survival among ova produced from the squid oil-fed broodstock. Our data suggest the importance of feeding white bass broodstock diets high in total n-3 LC-PUFA (at least 4.0% dry matter), and 20:5n-3-rich lipid sources such as menhaden oil can be effectively utilized by female white bass to produce quality ova.

Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison.

PubMed

Speirs, M; Van Hooreweder, B; Van Humbeeck, J; Kruth, J-P

2017-06-01

Selective laser melting (SLM) is an additive manufacturing technique able to produce complex functional parts via successively melting layers of metal powder. This process grants the freedom to design highly complex scaffold components to allow bone ingrowth and aid mechanical anchorage. This paper investigates the compression fatigue behaviour of three different unit cells (octahedron, cellular gyroid and sheet gyroid) of SLM nitinol scaffolds. It was found that triply periodic minimal surfaces display superior static mechanical properties in comparison to conventional octahedron beam lattice structures at identical volume fractions. Fatigue resistance was also found to be highly geometry dependent due to the effects of AM processing techniques on the surface topography and notch sensitivity. Geometries minimising nodal points and the staircase effect displayed the greatest fatigue resistance when normalized to yield strength. Furthermore oxygen analysis showed a large oxygen uptake during SLM processing which must be altered to meet ASTM medical grade standards and may significantly reduce fatigue life. These achieved fatigue properties indicate that NiTi scaffolds produced via SLM can provide sufficient mechanical support over an implants lifetime within stress range values experienced in real life. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dynamic changes in neural circuit topology following mild mechanical injury in vitro.

PubMed

Patel, Tapan P; Ventre, Scott C; Meaney, David F

2012-01-01

Despite its enormous incidence, mild traumatic brain injury is not well understood. One aspect that needs more definition is how the mechanical energy during injury affects neural circuit function. Recent developments in cellular imaging probes provide an opportunity to assess the dynamic state of neural networks with single-cell resolution. In this article, we developed imaging methods to assess the state of dissociated cortical networks exposed to mild injury. We estimated the imaging conditions needed to achieve accurate measures of network properties, and applied these methodologies to evaluate if mild mechanical injury to cortical neurons produces graded changes to either spontaneous network activity or altered network topology. We found that modest injury produced a transient increase in calcium activity that dissipated within 1 h after injury. Alternatively, moderate mechanical injury produced immediate disruption in network synchrony, loss in excitatory tone, and increased modular topology. A calcium-activated neutral protease (calpain) was a key intermediary in these changes; blocking calpain activation restored the network nearly completely to its pre-injury state. Together, these findings show a more complex change in neural circuit behavior than previously reported for mild mechanical injury, and highlight at least one important early mechanism responsible for these changes.