Biosynthesis, characterization and enzymatic transesterification of single cell oil of Mucor circinelloides--a sustainable pathway for biofuel production.

PubMed

Carvalho, Ana K F; Rivaldi, Juan D; Barbosa, Jayne C; de Castro, Heizir F

2015-04-01

The filamentous fungus Mucor circinelloides URM 4182 was tested to determine its ability to produce single-cell oil suitable for obtaining biodiesel. Cell growth and lipid accumulation were investigated in a medium containing glucose as the main carbon source. A microwave-assisted ethanol extraction technique (microwave power ⩽200 W, 50-60 °C) was established and applied to lipid extraction from the fungal hyphae to obtain high lipid concentration (44%wt) of the dry biomass, which was considerably higher than the quantity obtained by classical solvent methods. The lipid profile showed a considerable amount of oleic acid (39.3%wt), palmitic acid (22.2%wt) and γ-linoleic acid (10.8%wt). Biodiesel was produced by transesterification of the single-cell oil with ethanol using a immobilized lipase from Candida antarctica (Novozym® 435) as the catalyst. (1)H NMR and HPLC analyses confirmed conversion of 93% of the single-cell oil from M. circinelloides into ethyl esters (FAEE). Copyright © 2015 Elsevier Ltd. All rights reserved.

PREPARATION OF URANIUM TRIOXIDE

DOEpatents

Buckingham, J.S.

1959-09-01

The production of uranium trioxide from aqueous solutions of uranyl nitrate is discussed. The uranium trioxide is produced by adding sulfur or a sulfur-containing compound, such as thiourea, sulfamic acid, sulfuric acid, and ammonium sulfate, to the uranyl solution in an amount of about 0.5% by weight of the uranyl nitrate hexahydrate, evaporating the solution to dryness, and calcining the dry residue. The trioxide obtained by this method furnished a dioxide with a considerably higher reactivity with hydrogen fluoride than a trioxide prepared without the sulfur additive.

Direct morphological comparison of vacuum plasma sprayed and detonation gun sprayed hydroxyapatite coatings for orthopaedic applications.

PubMed

Gledhill, H C; Turner, I G; Doyle, C

1999-02-01

Hydroxyapatite coatings on titanium substrates were produced using two thermal spray techniques vacuum plasma spraying and detonation gun spraying. X-ray diffraction was used to compare crystallinity and residual stresses in the coatings. Porosity was measured using optical microscopy in conjunction with an image analysis system. Scanning electron microscopy and surface roughness measurements were used to characterise the surface morphologies of the coatings. The vacuum plasma sprayed coatings were found to have a lower residual stress, a higher crystallinity and a higher level of porosity than the detonation gun coatings. It is concluded that consideration needs to be given to the significance of such variations within the clinical context.

Producibility consideration for millimeter-wave transceivers

NASA Astrophysics Data System (ADS)

Seashore, Charles R.

1995-10-01

Considerable progress has been made in the development and demonstration of millimeter wave MMIC technology up to frequencies approaching 100 GHz. The recently completed multiyear, ARPA-sponsored, MIMIC program provided a considerable amount of funding and government-contractor team energy to advance the state-of-art with a number of important GaAs-based transceiver building blocks. Unfortuanely, producibility of millimeter wave MMIC transceiver modules has not been similarly addressed to provide a truly low cost, marketable product. This paper considers the module producibility problem and its various technological implications.

Breeding of D(-)-lactic acid high producing strain by low-energy ion implantation and preliminary analysis of related metabolism.

PubMed

Xu, Ting-Ting; Bai, Zhong-Zhong; Wang, Li-Juan; He, Bing-Fang

2010-01-01

The low-energy nitrogen ion beam implantation technique was used in the breeding of mutant D(-)-lactic-acid-producing strains. The wild strain Sporolactobacillus sp. DX12 was mutated by an N(+) ion beam with energy of 10keV and doses ranging from 0.4 x 10(15) to 6.60 x 10(15) ions/cm(2). Combined with an efficient screening method, an efficient mutant Y2-8 was selected after two times N(+) ion beam implantation. By using the mutant Y2-8, 121.6g/l of D-lactic acid was produced with the molar yields of 162.1% to the glucose. The yield of D-lactic acid by strain Y2-8 was 198.8% higher than the wild strain. Determination of anaerobic metabolism by Biolog MT2 was used to analyze the activities of the concerned enzymes in the lactic acid metabolic pathway. The results showed that the activities of the key enzymes responded on the substrates such as 6-phosphofructokinase, pyruvate kinase, and D-lactate dehydrogenase were considerably higher in the mutants than the wild strain. These might be affected by ion beam implantation.

[Earlier steps of the soil ecosystem evolution].

PubMed

Ponomarenko, A G

2013-01-01

Fossil soils are known since early Praecambrian, long before the occurrence of higher terrestrial plants on the Earth. Primeval biocoenoses on the land and in continental water bodies were floating and bottom prokaryotic mats and films which produced the majority of biomass and with regard to specific productivity were not inferior to any other photosynthetics. Before the occurrence of higher plants, erosion was very strong, resulting in flat relief, absence of permanent streams, domination of wandering rivers and surface runoff; all water bodies were muddy. When floods occurred, which was quite so often, clay particles of muddy water streams isolated bottom-mats from the light and then their considerable part perished. The result was not soil as a uniform bioinert body but rather a "puff pie" consisted of layers of unoxidized charred organic matter and clay prolayers. The burial of unoxidized organic matter contributed to enrichment of the atmosphere with oxygen. Worms and arthropods, which came out to the land and continental water bodies during Cambrian period, mixed up the organic matter with mineral components strengthening the process of soil forming considerably. Soils of the modern type appeared after higher plants expanded in Devonian and displaced bottom-mats in shallow waters. The soil fauna that existed at this time was not so different from the modern one with regard to its evolutionary level.

Biodiversity hotspots house most undiscovered plant species.

PubMed

Joppa, Lucas N; Roberts, David L; Myers, Norman; Pimm, Stuart L

2011-08-09

For most organisms, the number of described species considerably underestimates how many exist. This is itself a problem and causes secondary complications given present high rates of species extinction. Known numbers of flowering plants form the basis of biodiversity "hotspots"--places where high levels of endemism and habitat loss coincide to produce high extinction rates. How different would conservation priorities be if the catalog were complete? Approximately 15% more species of flowering plant are likely still undiscovered. They are almost certainly rare, and depending on where they live, suffer high risks of extinction from habitat loss and global climate disruption. By using a model that incorporates taxonomic effort over time, regions predicted to contain large numbers of undiscovered species are already conservation priorities. Our results leave global conservation priorities more or less intact, but suggest considerably higher levels of species imperilment than previously acknowledged.

Shore Stabilization with Salt Marsh Vegetation.

DTIC Science & Technology

1983-01-01

seedlings - more expensive to grow and plant, more awkward to handle and transport, but relatively easy to produce. (3) Plugs - most expensive to...to sprigs, particularly if trans- planted late in the growing season. Pot-grown seedlings are relatively easy to produce but considerably more...transplanted late in the growing season. Pot-grown seedlings are relatively easy to produce but considerably more expensive than sprigs (Fig. 25). To prepare

Microstructure and Elevated Temperature Properties of a Refractory TaNbHfZrTi Alloy

DTIC Science & Technology

2012-01-24

composition of the TaNbHfZrTi alloy produced by vacuum arc melting Composition Ta Nb Hf Zr Ti at.% 19.68 18.93 20.46 21.23 19.7 wt. % 30.04 14.84 30.82 16.34...metallic materials with higher melting points, such as refractory molybdenum (Mo) and niobium ( Nb ) alloys, are examined as alternatives by academic and...creep resistance are the key properties of these alloys, since considerable alloy softening generally occurs at tempera- tures above *0.5 0.6 Tm

High purity silica reflecting heat shield development

NASA Technical Reports Server (NTRS)

Congdon, W.

1974-01-01

A reflecting heat shield composed of fused silica in which the scattering results from the refractive index mismatch between silica particles and the voids introduced during the fabrication process is developed. Major considerations and conclusions of the development are: the best material to use is Type A, which is capable of ultra-high-purity and which does not show the 0.243 micrometer absorption band; the reflection efficiency of fused silica is decreased at higher temperatures due to the bathochromic shift of the ultraviolet cut-off; for a given silica material, over the wavelength region and particle sizes tested, the monodisperse particle size configurations produce higher reflectances than continuous particle size configurations; and the smaller monodisperse particle size configurations give higher reflectance than the larger ones. A reflecting silica configuration that is an efficient reflector of shock layer radiation at high ablation temperatures is achieved by tailoring the matrix for optimum scattering and using an ultra-high-purity material.

Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments

PubMed Central

Håkansson, Karl M. O.; Fall, Andreas B.; Lundell, Fredrik; Yu, Shun; Krywka, Christina; Roth, Stephan V.; Santoro, Gonzalo; Kvick, Mathias; Prahl Wittberg, Lisa; Wågberg, Lars; Söderberg, L. Daniel

2014-01-01

Cellulose nanofibrils can be obtained from trees and have considerable potential as a building block for biobased materials. In order to achieve good properties of these materials, the nanostructure must be controlled. Here we present a process combining hydrodynamic alignment with a dispersion–gel transition that produces homogeneous and smooth filaments from a low-concentration dispersion of cellulose nanofibrils in water. The preferential fibril orientation along the filament direction can be controlled by the process parameters. The specific ultimate strength is considerably higher than previously reported filaments made of cellulose nanofibrils. The strength is even in line with the strongest cellulose pulp fibres extracted from wood with the same degree of fibril alignment. Successful nanoscale alignment before gelation demands a proper separation of the timescales involved. Somewhat surprisingly, the device must not be too small if this is to be achieved. PMID:24887005

Developing a mesophilic co-culture for direct conversion of cellulose to butanol in consolidated bioprocess.

PubMed

Wang, Zhenyu; Cao, Guangli; Zheng, Ju; Fu, Defeng; Song, Jinzhu; Zhang, Junzheng; Zhao, Lei; Yang, Qian

2015-01-01

Consolidated bioprocessing (CBP) of butanol production from cellulosic biomass is a promising strategy for cost saving compared to other processes featuring dedicated cellulase production. CBP requires microbial strains capable of hydrolyzing biomass with enzymes produced on its own with high rate and high conversion and simultaneously produce a desired product at high yield. However, current reported butanol-producing candidates are unable to utilize cellulose as a sole carbon source and energy source. Consequently, developing a co-culture system using different microorganisms by taking advantage of their specific metabolic capacities to produce butanol directly from cellulose in consolidated bioprocess is of great interest. This study was mainly undertaken to find complementary organisms to the butanol producer that allow simultaneous saccharification and fermentation of cellulose to butanol in their co-culture under mesophilic condition. Accordingly, a highly efficient and stable consortium N3 on cellulose degradation was first developed by multiple subcultures. Subsequently, the functional microorganisms with 16S rRNA sequences identical to the denaturing gradient gel electrophoresis (DGGE) profile were isolated from consortium N3. The isolate Clostridium celevecrescens N3-2 exhibited higher cellulose-degrading capability was thus chosen as the partner strain for butanol production with Clostridium acetobutylicum ATCC824. Meanwhile, the established stable consortium N3 was also investigated to produce butanol by co-culturing with C. acetobutylicum ATCC824. Butanol was produced from cellulose when C. acetobutylicum ATCC824 was co-cultured with either consortium N3 or C. celevecrescens N3-2. Co-culturing C. acetobutylicum ATCC824 with the stable consortium N3 resulted in a relatively higher butanol concentration, 3.73 g/L, and higher production yield, 0.145 g/g of glucose equivalent. The newly isolated microbial consortium N3 and strain C. celevecrescens N3-2 displayed effective degradation of cellulose and produced considerable amounts of butanol when they were co-cultured with C. acetobutylicum ATCC824. This is the first report of application of co-culture to produce butanol directly from cellulose under mesophilic condition. Our results indicated that co-culture of mesophilic cellulolytic microbe and butanol-producing clostridia provides a technically feasible and more simplified way for producing butanol directly from cellulose.

Comparison of the microflora on organically and conventionally grown spring mix from a California processor.

PubMed

Phillips, Christie A; Harrison, Mark A

2005-06-01

Considerable speculation has occurred concerning the potential for higher numbers of foodborne pathogens on organically grown produce compared with produce not grown organically. The microflora composition of spring mix or mesclun, a mixture of multiple salad ingredients, grown either by organic or conventional means was determined. Unwashed or washed spring mix was obtained from a commercial California fresh-cut produce processor who does not use manure in their cultivation practices. Fifty-four samples of each type of product were supplied over a 4-month period. Analysis included enumeration of total mesophiles, psychrotrophs, coliforms, generic Escherichia coli, lactic acid bacteria, yeasts, and molds. In addition, spring mix was analyzed for the presence of Salmonella and Listeria monocytogenes. The mean populations of mesophilic and psychrotrophic bacteria, yeasts, molds, lactic acid bacteria, and coliforms on conventionally grown spring mix were not statistically different (P > 0.05) from respective mean populations on organically grown spring mix. The mean population of each microbial group was significantly higher on unwashed spring mix compared with the washed product. Of the 14 samples found to contain E. coli, eight were from nonwashed conventional spring mix, one was from washed conventional spring mix, and four were from nonwashed organic spring mix. Salmonella and L. monocytogenes were not detected in any of the samples analyzed.

[Molecular characterization and antimicrobial susceptibility pattern of extended-spectrum β-lactamase-producing Escherichia coli as cause of community acquired urinary tract infection].

PubMed

Galindo-Méndez, Mario

Background Community acquired urinary tract infections (CaUTI) caused by strains of extended-spectrum β-lactamases (ESBL) - producing Escherichia coli, mainly by strains carrying the blaCTX-M-15 gene, is a growing phenomenon worldwide. Aim To determine the antibiotic susceptibility pattern of ESBL-producing E. coli as cause of CaUTI and to identify their molecular pattern. Methods A descriptive study was performed in the city of Oaxaca, Mexico, from where 288 strains of CaUTI-producing strains of E. coli in adults with possible UTI were isolated. The CLSI criteria was followed to determine the antimicrobial susceptibility patterns, and their molecular characterization was performed by using PCR. Results 31.3% of E. coli strains isolated in our population were ESBL producers, which presented higher levels of antibiotic resistance than those of non-producers of these enzymes. 95.6% of the studied strains were carriers of the blaCTX-M gene. Conclusions One-third of the Ca-UTI caused by E. coli in our population are caused by ESBL-producing strains, which present high levels of resistance to the antibiotics widely used in our community. This situation considerably decreases the number of antibiotics available for an empiric treatment against these infections.

Fabrication of an r-Al2Ti intermetallic matrix composite reinforced with α-Al2O3 ceramic by discontinuous mechanical milling for thermite reaction

NASA Astrophysics Data System (ADS)

Mosleh, A.; Ehteshamzadeh, M.; Taherzadeh Mousavian, R.

2014-10-01

In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite (IMC) reinforced with α-Al2O3 ceramic by a novel milling technique, called discontinuous mechanical milling (DMM) instead of milling and ignition of the produced thermite. The results of energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) of samples with varying milling time indicate that this fabrication process requires considerable mechanical energy. It is shown that Al2Ti-Al2O3 IMC with small grain size was produced by DMM after 15 h of ball milling. Peaks for γ-TiAl as well as Al2Ti and Al2O3 are observed in XRD patterns after DMM followed by heat treatment. The microhardness of the DMM-treated composite produced after heat treatment was higher than Hv 700.

Experimental investigation of recirculating cells in laminar coaxial jets.

NASA Technical Reports Server (NTRS)

Warpinski, N. R.; Nagib, H. M.; Lavan, Z.

1972-01-01

Utilizing several unique means of introducing smoke into the flow field for careful visualization in addition to hot-wire techniques, experiments are performed in a specially designed facility producing laminar flows up to considerably high Reynolds numbers. Characteristics of the cells and the flow conditions that bring them about are documented by smoke photographs in the Reynolds number velocity ratio plane and the results are compared to previous analytical predictions. The cells are found to fall into three categories with different flow characteristics involving unsteadiness in position, and shear layer instabilities which result in higher mixing with the outer streams.-

Fire test methodology for aerospace materials. 1: Thermal and smoke toxicological assessments of graphite/bismaleimide and graphite/epoxy systems

NASA Technical Reports Server (NTRS)

Kanakia, M. D.; Switzer, W. G.; Hartzell, G. E.; Kaplan, H. L.

1980-01-01

Both materials possess a high degree of thermal stability, with total heat release values being essentially identical under piloted ignition conditions over a range of 5 to 10 W/sq cm incident heat flux. The graphite/epoxy material had a tendency to auto-ignite at a lower heat flux (about 7 W/sq cm) and produced about 23 percent higher peak heat release rates, approximately 42 percent more carbon monoxide and considerably more smoke than the graphite/bismaleimide under conditions of piloted ignition. Toxicological potencies of smoke produced from the two composites were equivalent for 30 minute exposures. Potencies were also comparable to many common materials, such as wood. There was no evidence for the formation of an "unusual toxicant" nor for any short term post-exposure toxicological effects.

Probing evolutionary population synthesis models in the near infrared with early-type galaxies

NASA Astrophysics Data System (ADS)

Dahmer-Hahn, Luis Gabriel; Riffel, Rogério; Rodríguez-Ardila, Alberto; Martins, Lucimara P.; Kehrig, Carolina; Heckman, Timothy M.; Pastoriza, Miriani G.; Dametto, Natacha Z.

2018-06-01

We performed a near-infrared (NIR; ˜1.0 -2.4 μm) stellar population study in a sample of early-type galaxies. The synthesis was performed using five different evolutionary population synthesis libraries of models. Our main results can be summarized as follows: low-spectral-resolution libraries are not able to produce reliable results when applied to the NIR alone, with each library finding a different dominant population. The two newest higher resolution models, on the other hand, perform considerably better, finding consistent results to each other and to literature values. We also found that optical results are consistent with each other even for lower resolution models. We also compared optical and NIR results and found out that lower resolution models tend to disagree in the optical and in the NIR, with higher fraction of young populations in the NIR and dust extinction ˜1 mag higher than optical values. For higher resolution models, optical and NIR results tend to agree much better, suggesting that a higher spectral resolution is fundamental to improve the quality of the results.

Analysis of Functional Constituents in Mulberry (Morus alba L.) Twigs by Different Cultivars, Producing Areas, and Heat Processings

PubMed Central

Choi, Sang Won; Jang, Yeon Jeong; Lee, Yu Jin; Leem, Hyun Hee; Kim, Eun Ok

2013-01-01

Four functional constituents, oxyresveratrol 3′-O-β-D-glucoside (ORTG), oxyresveratrol (ORT), t-resveratrol (RT), and moracin (MC) were isolated from the ethanolic extract of mulberry (Morus alba L.) twigs by a series of isolation procedures, including solvent fractionation, and silica-gel, ODS-A, and Sephadex LH-20 column chromatographies. Their chemical structures were identified by NMR and FABMS spectral analysis. Quantitative changes of four phytochemicals in mulberry twigs were determined by HPLC according to cultivar, producing area, and heat processing. ORTG was a major abundant compound in the mulberry twigs, and its levels ranged from 23.7 to 105.5 mg% in six different mulberry cultivars. Three other compounds were present in trace amounts (<1 mg/100 g) or were not detected. Among mulberry cultivars examined, “Yongcheon” showed the highest level of ORTG, whereas “Somok” had the least ORTG content. Levels of four phytochemicals in the mulberry twigs harvested in early September were higher than those harvested in early July. Levels of ORTG and ORT in the “Cheongil” mulberry twigs produced in the Uljin area were higher than those produced in other areas. Generally, levels of ORTG and ORT in mulberry twigs decreased with heat processing, such as steaming, and microwaving except roasting, whereas those of RT and MC did not considerably vary according to heat processing. These results suggest that the roasted mulberry twigs may be useful as potential sources of functional ingredients and foods. PMID:24551827

Young consumers' considerations of healthy working conditions in purchasing decisions: a qualitative examination.

PubMed

Dixon, Shane M; Nordvall, Anna-Carin; Cukier, Wendy; Neumann, W Patrick

2017-05-01

Research has suggested that products manufactured under healthy work conditions (HWC) may provide a marketing advantage to companies. This paper explores young consumers' considerations of HWC in purchasing decisions using data from qualitative interviews with a sample of 21 university students. The results suggest that interviewees frequently considered the working conditions of those who produced the products they purchased. Participants reported a willingness to pay 17.5% more on a $100 product if it were produced under HWC compared to not. Their ability and willingness to act on this issue was, however, hampered by  a lack of credible information about working conditions in production, the limited availability of HWC goods and a presumed higher price of HWC goods. While caution should be applied when generalising from this targetable market segment to a general population, these results provide actionable direction for companies interested in using a HWC brand image to gain a strategic sales advantage. Practitioner Summary: This interview study shows that young consumers are interested in, and willing to pay a premium for, goods made under healthy working conditions (HWC). Reported barriers to acting on this impulse include a lack of credible information on working conditions. Ergonomics can help provide a strategic marketing advantage for companies.

[Animal welfare standards in ecological animal husbandry and the possibilities of their regulation].

PubMed

Sundrum, A

1993-02-01

There is an ethic claim to an increasing consideration of animal welfare in agricultural husbandry. To put this in practise requires the consumer's willingness to pay higher prices for food, produced according to animal's needs. A growing number of consumers is willing to do that. For the higher price the consumer expects a product-security, which guarantees processing standards by transparent criteria and inspection. Guidelines in organic agriculture regulate standards of animal welfare and environmental friendly production. Standards of animal welfare are far beyond those in protection of animals legislation. Nevertheless, they don't allow a general judgement about animal welfare in husbandry systems on organic ruled farms. A practicable and conclusive valuation-concept is necessary. It is referred to the animal needs index as a concept for valuation, which is already tested in practice.

Use of indigenous technology for the production of high quality cassava flour with similar food qualities as wheat flour.

PubMed

Eleazu, Ogbonnaya Chinedum; Eleazu, Kate Chinedum; Kolawole, Segun

2014-01-01

The aim of the paper was to compare the food qualities of 2 varieties (SME 1 and 2) of high quality cassava flour (HQCF) produced from indigenous technology and that of some commercially sold wheat/HQCF samples. The pH, proximate, phytochemical, antioxidant, functional properties and starch yield of the flours were carried out using standard techniques. The wheat flours had higher bulk densities and lipids than the HQCF samples while the oil absorption capacity of the HQCF (SME 2) was higher than other fl our samples investigated. The antioxidant assays of the flours showed that they contained considerable levels of antioxidants with the HQCF sample from DAT having higher antioxidants than other flour samples studied. The HQCF (SME 1) had significantly higher (P < 0.05) starch content among the flour samples. The bacteria counts of the HQCF samples ranged from 0 to 1.4 × 10(4) cfu/ml while the fungal count ranged from 0 to 2 × 10(-3) with the unbranded wheat fl our having the highest microbial load compared with other flour samples studied. The use of this indigenous technology produces HQCF with lower lipids, microbial contamination but higher flavour retaining ability, flavonoids and starch contents than wheat flour. The significant positive correlation (R2 = 0.872) between reducing power of the samples and their DPPH antioxidant activity indicate that either could be used to assay for the total antioxidant activity of cassava and wheat flour. The study underscores the need to buy flour from branded companies to reduce the risks of microbial contamination.

The neuromuscular blocking properties of a series of bis-quaternary tropeïnes

PubMed Central

Haining, C. G.; Johnston, R. G.; Smith, J. M.

1960-01-01

Linkage of two tropine esters through their nitrogen atoms by the chain -[CH2]m-O-CO-[CH2]n-CO-O-[CH2]m-, in which m was 2 or 3 and n varied from 0 to 6, gave compounds which produced neuromuscular block without depolarization. Reversibility be neostigmine was confirmed for a few compounds. Potency was found to depend upon the tropine ester employed and upon the values of n and m. Short duration and hypotensive properties were favoured by the higher values of n. The duration of action of the compound based on the phenylacetic acid ester of tropine, in which n=4 and m=2, varied considerably in different species. Epimerization, in which the relative positions of the methyl group and the linking chain on the quaternary tropane nitrogen atom were reversed, did not produce subtances having more favourable properties than those possessed by the unepimerized compounds. PMID:14398886

Methodological considerations regarding the use of inorganic 197Hg(II) radiotracer to assess mercury methylation potential rates in lake sediment

USGS Publications Warehouse

Perez, Catan S.; Guevara, S.R.; Marvin-DiPasquale, M.; Magnavacca, C.; Cohen, I.M.; Arribere, M.

2007-01-01

Methodological considerations on the determination of benthic methyl-mercury (CH3Hg) production potentials were investigated on lake sediment, using 197Hg radiotracer. Three methods to arrest bacterial activity were compared: flash freezing, thermal sterilization, and ??-irradiation. Flash freezing showed similar CH3Hg recoveries as thermal sterilization, which was both 50% higher than the recoveries obtained with ??-ray irradiation. No additional radiolabel was recovered in kill-control samples after an additional 24 or 65 h of incubation, suggesting that all treatments were effective at arresting Hg(II)-methylating bacterial activity, and that the initial recoveries are likely due to non-methylated 197Hg(II) carry-over in the organic extraction and/or [197Hg]CH3Hg produced via abiotic reactions. Two CH3Hg extraction methods from sediment were compared: (a) direct extraction into toluene after sediment leaching with CuSO4 and HCl and (b) the same extraction with an additional back-extraction step to thiosulphate. Similar information was obtained with both methods, but the low efficiency observed and the extra work associated with the back-extraction procedure represent significant disadvantages, even tough the direct extraction involves higher Hg(II) carry over. ?? 2007 Elsevier Ltd. All rights reserved.

Analysis of the mobile phone effect on the heart rate variability by using the largest Lyapunov exponent.

PubMed

Yılmaz, Derya; Yıldız, Metin

2010-12-01

In this study, the effects of electromagnetic fields (EMFs) emitted by GSM900 based mobile phones (MPs) on the heart rate variability (HRV) were examined by using nonlinear analysis methods. The largest Lyapunov exponent (LLE) calculation was used to evaluate the effect of MP under various real exposure conditions. Sixteen healthy young volunteers were exposed to EMFs emitted by GSM900 based MP at two levels from a very low EMF (MP at stand-by) to a higher EMF (MP at pre-ring handshaking and ringing). A blind experimental protocol was designed and utilized with consideration to the physiological and psychological factors that may affect HRV. The results showed that the LLE values increased slightly with higher EMF produced by MP (P < 0.05). This change indicates that the degree of chaos in the HRV signals increased at higher EMF compared to low level EMF. Consequently, we have concluded that high level EMF changed the complexity of cardiac system behavior, significantly.

Assessment of relative potential for Legionella species or surrogates inhalation exposure from common water uses.

PubMed

Hines, Stephanie A; Chappie, Daniel J; Lordo, Robert A; Miller, Brian D; Janke, Robert J; Lindquist, H Alan; Fox, Kim R; Ernst, Hiba S; Taft, Sarah C

2014-06-01

The Legionella species have been identified as important waterborne pathogens in terms of disease morbidity and mortality. Microbial exposure assessment is a tool that can be utilized to assess the potential of Legionella species inhalation exposure from common water uses. The screening-level exposure assessment presented in this paper developed emission factors to model aerosolization, quantitatively assessed inhalation exposures of aerosolized Legionella species or Legionella species surrogates while evaluating two generalized levels of assumed water concentrations, and developed a relative ranking of six common in-home uses of water for potential Legionella species inhalation exposure. Considerable variability in the calculated exposure dose was identified between the six identified exposure pathways, with the doses differing by over five orders of magnitude in each of the evaluated exposure scenarios. The assessment of exposure pathways that have been epidemiologically associated with legionellosis transmission (ultrasonic and cool mist humidifiers) produced higher estimated inhalation exposure doses than pathways where epidemiological evidence of transmission has been less strong (faucet and shower) or absent (toilets and therapy pool). With consideration of the large uncertainties inherent in the exposure assessment process used, a relative ranking of exposure pathways from highest to lowest exposure doses was produced using culture-based measurement data and the assumption of constant water concentration across exposure pathways. In this ranking, the ultrasonic and cool mist humidifier exposure pathways were estimated to produce the highest exposure doses, followed by the shower and faucet exposure pathways, and then the toilet and therapy pool exposure pathways. Published by Elsevier Ltd.

Wine Resveratrol: From the Ground Up

PubMed Central

Bavaresco, Luigi; Lucini, Luigi; Busconi, Matteo; Flamini, Riccardo; De Rosso, Mirko

2016-01-01

The ability of the grapevine to activate defense mechanisms against some pathogens has been shown to be linked to the synthesis of resveratrol and other stilbenes by the plant (inducible viniferins). Metabolized viniferins may also be produced or modified by extracellular enzymes released by the pathogen in an attempt to eliminate undesirable toxic compounds. Because of the important properties of resveratrol, there is increasing interest in producing wines with higher contents of this compound and a higher nutritional value. Many biotic and abiotic elicitors can trigger the resveratrol synthesis in the berries, and some examples are reported. Under the same elicitation pressure, viticultural and enological factors can substantially affect the resveratrol concentration in the wine. The production of high resveratrol-containing grapes and wines relies on quality-oriented viticulture (suitable terroirs and sustainable cultural practices) and winemaking technologies that avoid degradation of the compound. In general, the oenological practices commonly used to stabilize wine after fermentation do not affect resveratrol concentration, which shows considerable stability. Finally the paper reports on two sirtuin genes (SIRT) expressed in grapevine leaves and berries and the role of resveratrol on the deacetylation activity of the encoded enzymes. PMID:27089363

On-site production of crude glucoamylase for kitchen waste hydrolysis.

PubMed

Wang, Xiao Qiang; Wang, Qun Hui; Liu, Ying Ying; Ma, Hong Zhi

2010-06-01

Kitchen waste from dining rooms accounts for a considerable proportion of municipal solid garbage, and economical recycle ways are needed to be developed. This study investigated glucoamylase production from kitchen waste and the feasibility of kitchen waste hydrolysis by the crude enzymes produced. The key problems of high water content and poor porosity in kitchen waste for glucoamylase production under solid-state fermentation could be solved readily by the addition of corn stover or paddy husk. As a support medium, corn stover was better than paddy husk. Smashed kitchen waste (sKW) mixed with corn stover in the ratio of 3.75 : 1 (dry basis) produced 1838 U g(-1) of glucoamylase by Aspergillus niger UV-60 within 96 h. The enzyme productivity from kitchen waste was over two-fold higher than that from wheat bran with additional nutrients. Without any recovery treatment, the produced glucoamylase could be used directly to hydrolyse sKW slurry. The optimum enzyme dose 8% (crude enzyme/kichen waste, w/w) was not too big, and was sufficient to hydrolyse 10% (dry basis) sKW slurry to produce a maximum amount of reducing sugar of 55.4 g L(-1).

A study of the bacterial community in the root system of the maytansine containing plant Putterlickia verrucosa.

PubMed

Wings, Susanne; Müller, Henry; Berg, Gabriele; Lamshöft, Marc; Leistner, Eckhard

2013-07-01

Maytansinoid compounds are ansa antibiotics occurring in the bacterium Actinosynnema pretiosum, in mosses and in higher plants such as Putterlickia verrucosa (E. Meyer ex Sonder) Szyszyl. The disjunct occurrence of maytansinoids has led to the consideration that plant-associated bacteria may be responsible for the presence of maytansinoids in P. verrucosa plants. Investigation of the bacterial community of this plant by molecular methods led to the observation that A. pretiosum, a maytansine-producing bacterium, is likely to be an inhabitant of the rhizosphere and the endorhiza of P. verrucosa. Copyright © 2012 Elsevier Ltd. All rights reserved.

Actinomadura Species: Laboratory Maintenance and Ribosome Engineering.

PubMed

Dhakal, Dipesh; Chung, Nguyen Thanh; Rayamajhi, Vijay; Sohng, Jae Kyung

2017-02-06

Actinomadura spp. are aerobic, Gram-positive, catalase-positive, non-acid fast, non-motile actinomycetes. Some species of Actinomadura are associated with opportunistic infections in humans. However, many bioactive compounds with pharmaceutical applications can be isolated from various Actinomadura spp. This unit includes general protocols for the laboratory maintenance of Actinomadura spp., including growth in liquid medium, growth on solid agar, long-term storage, and generation of a higher producing strain by ribosome engineering. Actinomadura hibisca P157-2 is used as a prototype for explaining the considerations for efficient laboratory maintenance of Actinomadura spp. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

Water contamination from oil extraction activities in Northern Peruvian Amazonian rivers.

PubMed

Yusta-García, Raúl; Orta-Martínez, Martí; Mayor, Pedro; González-Crespo, Carlos; Rosell-Melé, Antoni

2017-06-01

Oil extraction activities in the Northern Peruvian Amazon have generated a long-standing socio-environmental conflict between oil companies, governmental authorities and indigenous communities, partly derived from the discharge of produced waters containing high amounts of heavy metals and hydrocarbons. To assess the impact of produced waters discharges we conducted a meta-analysis of 2951 river water and 652 produced water chemical analyses from governmental institutions and oil companies reports, collected in four Amazonian river basins (Marañon, Tigre, Corrientes and Pastaza) and their tributaries. Produced water discharges had much higher concentrations of chloride, barium, cadmium and lead than are typically found in fresh waters, resulting in the widespread contamination of the natural water courses. A significant number of water samples had levels of cadmium, barium, hexavalent chromium and lead that did not meet Peruvian and international water standards. Our study shows that spillage of produced water in Peruvian Amazon rivers placed at risk indigenous population and wildlife during several decades. Furthermore, the impact of such activities in the headwaters of the Amazon extended well beyond the boundaries of oil concessions and national borders, which should be taken into consideration when evaluating large scale anthropogenic impacts in the Amazon. Copyright © 2017 Elsevier Ltd. All rights reserved.

Butyrate-producing bacteria, including mucin degraders, from the swine intestinal tract

USDA-ARS?s Scientific Manuscript database

Butyrate-producing microbes promote gastrointestinal health in the human gut, and similar benefits are likely derived from butyrate-producing microbes in other animal hosts. Consequently, there is considerable potential for butyrate-producing microbes to be utilized in health-promoting application...

Disgust and Contamination: A Cross-National Comparison of Ghana and the United States

PubMed Central

Skolnick, Alexander J.; Dzokoto, Vivian A.

2012-01-01

The emotion of disgust, with feelings of revulsion and behavioral withdrawal, make it a prime emotion to aid in the avoidance of sources of contamination, including sources of potential infectious disease. We tested the theory that living in a region with a historically high prevalence of infectious diseases would promote higher levels of disgust and contamination sensitivity as a protective measure. A sample of undergraduates from Ghana (n = 103, 57 women), a country with a historically high prevalence of infectious diseases, showed significantly higher scores on scales assessing disgust, contamination, and disease susceptibility than a sample of undergraduates from the United States (n = 96, 58 women), a country with lower levels of disease threat. Contamination sensitivity mediated the national differences in disgust. Disgust connoting contamination also produced larger cross-national effect sizes than other types of disgust. Finally, a factor analysis on the Ghanaian responses to one of the disgust scales did not resemble the usual three-factor solution found in West. Taken together, the results were consistent with the hypothesis that a region with a higher prevalence of infectious disease threats would produce greater sensitivity to disgust and contamination than seen in lower disease threat regions. This first study on disgust in Africa showed that disgust sensitivity could differ considerably from that in the West. PMID:23450744

Complex submarine landsliding processes caused by subduction of large seamounts along the Middle America Trench

NASA Astrophysics Data System (ADS)

Harders, Rieka; Ranero, Cesar R.; Weinrebe, Wilhelm; von Huene, Roland

2014-05-01

Subduction of kms-tall and tens-of-km wide seamounts cause important landsliding events at subduction zones around the word. Along the Middle America Trench, previous work based on regional swath bathymetry maps (with 100 m grids) and multichannel seismic images have shown that seamount subduction produces large-scale slumping and sliding. Some of the mass wasting event may have been catastrophic and numerical modeling has indicated that they may have produced important local tsunamis. We have re-evaluated the structure of several active submarine landlide complexes caused by large seamount subduction using side scan sonar data. The comparison of the side scan sonar data to local high-resolution bathymetry grids indicates that the backscatter data has a resolution that is somewhat similar to that produced by a 10 m bathymetry grid. Although this is an arbitrary comparison, the side scan sonar data provides comparatively much higher resolution information than the previously used regional multibeam bathymetry. We have mapped the geometry and relief of the head and side walls of the complexes, the distribution of scars and the different sediment deposits to produce a new interpretation of the modes of landsliding during subduction of large seamounts. The new higher resolution information shows that landsliding processes are considerably more complex than formerly assumed. Landslides are of notably smaller dimensions that the lower resolution data had previously appear to indicate. However, significantly large events may have occur far more often than earlier interpretations had inferred representing a more common threat that previously assumed.

Dynamic Radioisotope Power System Development for Space Explorations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qualls, A L

Dynamic power conversion offers the potential to produce radioisotope power systems (RPS) that generate higher power outputs and utilize the Pu-238 radioisotope more efficiently than Radioisotope Thermoelectric Generators (RTG). Additionally, dynamic systems also offer the potential of producing generators with significantly reduced power degradation over the course of deep space missions so that more power will be available at the end of the mission when it is needed for both powering the science and transmitting the results. The development of dynamic generators involves addressing technical issues not typically associated with traditional thermoelectric generators. Developing long-life, robust and reliable dynamic conversionmore » technology is challenging yet essential to building a suitable generator. Considerations include working within existing handling infrastructure where possible so that development costs can be kept low and integrating dynamic generators into spacecraft, which may be more complex than integration of static systems. Methods of interfacing to and controlling a dynamic generator must be considered and new potential failure modes must be taken into account. This paper will address some of the key issues of dynamic RPS design, development and adaption.Dynamic power conversion offers the potential to produce Radioisotope Power Systems (RPS) that generate higher power outputs and utilize the available heat source plutonium fuel more efficiently than Radioisotope Thermoelectric Generators. Additionally, dynamic systems offer the potential of producing generators with significantly reduced power degradation over the course of deep space missions so that more power would be available at the end of the mission, when it is needed most for both powering science instruments and transmitting the resulting data. The development of dynamic generators involves addressing technical issues not typically associated with traditional thermoelectric generators. Developing long-life, robust, and reliable dynamic conversion technology is challenging yet essential to building a suitable flight-ready generator. Considerations include working within existing hardware-handling infrastructure, where possible, so that development costs can be kept low, and integrating dynamic generators into spacecraft, which may be more complex than integration of static thermoelectric systems. Methods of interfacing to and controlling a dynamic generator must also be considered, and new potential failure modes must be taken into account. This paper will address some of the key issues of dynamic RPS design, development, and adaption.« less

On the best bandstructure for thermoelectric performance: A Landauer perspective

NASA Astrophysics Data System (ADS)

Jeong, Changwook; Kim, Raseong; Lundstrom, Mark S.

2012-06-01

The question of what bandstructure produces the best thermoelectric device performance is revisited from a Landauer perspective. We find that a delta-function transport distribution function (TDF) results in operation at the Mahan-Sofo upper limit for the thermoelectric figure-of-merit, ZT. We show, however, the Mahan-Sofo upper limit itself depends on the bandwidth (BW) of the dispersion, and therefore, a finite BW dispersion produces a higher ZT when the lattice thermal conductivity is finite. Including a realistic model for scattering profoundly changes the results. Instead of a narrow band, we find that a broad BW is best. The prospects of increasing ZT through high valley degeneracy or by distorting the density-of-states are discussed from a Landauer perspective. We conclude that while there is no simple answer to the question of what bandstructure produces the best thermoelectric performance, the important considerations can be expressed in terms of three parameters derived from the bandstructure—the density-of-states, D(E ), the number of channels, M(E ), and the mean-free-path, λ(E ).

High-Speed, High-Temperature Finger Seal Test Evaluated

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.

2003-01-01

A finger seal, designed and fabricated by Honeywell Engines, Systems and Services, was tested at the NASA Glenn Research Center at surface speeds up to 1200 ft/s, air temperatures up to 1200 F, and pressures across the seal of 75 psid. These are the first test results obtained with NASA s new High-Temperature, High-Speed Turbine Seal Test Rig (see the photograph). The finger seal is an innovative design recently patented by AlliedSignal Engines, which has demonstrated considerably lower leakage than commonly used labyrinth seals and is considerably cheaper than brush seals. The cost to produce finger seals is estimated to be about half of the cost to produce brush seals. Replacing labyrinth seals with fingers seals at locations that have high-pressure drops in gas turbine engines, typically main engine and thrust seals, can reduce air leakage at each location by 50 percent or more. This directly results in a 0.7- to 1.4-percent reduction in specific fuel consumption and a 0.35- to 0.7-percent reduction in direct operating costs . Because the finger seal is a contacting seal, this testing was conducted to address concerns about its heat generation and life capability at the higher speeds and temperatures required for advanced engines. The test results showed that the seal leakage and wear performance are acceptable for advanced engines.

Aberrations associated with rigid contact lenses.

PubMed

Atchison, D A

1995-10-01

A rigid contact lens on an eye can produce levels of spherical aberration very different from those produced by a spectacle lens in front of the eye. These levels are considerably affected by contact lens surface asphericity. Change in longitudinal spherical aberration associated with aspherizing a contact lens surface is well predicted by a simple equation for change in sagittal power of the surface. Displacing an aspheric contact lens on the eye can produce considerable defocus, which is well predicted by simple equations for change in sagittal and tangential surface powers. The best refractive correction with contact lenses can be determined only by overrefraction with a patient wearing a contact lens of power and characteristics similar to that which will be prescribed. An aspheric contact lens that moves to a considerable extent on the eye will cause more unstable vision than will a spherical lens that moves to the same extent.

Photoionization research on atomic beams. 2: The photoionization cross section of atomic oxygen

NASA Technical Reports Server (NTRS)

Comes, F. J.; Speier, F.; Elzer, A.

1982-01-01

An experiment to determine the absolute value of the photo-ionization cross section of atomic oxygen is described. The atoms are produced in an electrical discharge in oxygen gas with 1% hydrogen added. In order to prevent recombination a crossed beam technique is employed. The ions formed are detected by a time-of-flight mass spectrometer. The concentration of oxygen atoms in the beam is 57%. The measured photoionization cross section of atomic oxygen is compared with theoretical data. The results show the participation of autoionization processes in ionization. The cross section at the autoionizing levels detected is considerably higher than the absorption due to the unperturbed continuum. Except for wavelengths where autoionization occurs, the measured ionization cross section is in fair agreement with theory. This holds up to 550 A whereas for shorter wavelengths the theoretical values are much higher.

Coatings for graphite fibers

NASA Technical Reports Server (NTRS)

Galasso, F. S.; Scola, D. A.; Veltri, R. D.

1980-01-01

Graphite fibers released from composites during burning or an explosion caused shorting of electrical and electronic equipment. Silicon carbide, silica, silicon nitride and boron nitride were coated on graphite fibers to increase their electrical resistances. Resistances as high as three orders of magnitude higher than uncoated fiber were attained without any significant degradation of the substrate fiber. An organo-silicone approach to produce coated fibers with high electrical resistance was also used. Celion 6000 graphite fibers were coated with an organo-silicone compound, followed by hydrolysis and pyrolysis of the coating to a silica-like material. The shear and flexural strengths of composites made from high electrically resistant fibers were considerably lower than the shear and flexural strengths of composites made from the lower electrically resistant fibers. The lower shear strengths of the composites indicated that the coatings on these fibers were weaker than the coating on the fibers which were pyrolyzed at higher temperature.

The synthesis of higher oxides of alkali and alkaline earth metals in an electric discharge: Theoretical and experimental studies

NASA Technical Reports Server (NTRS)

Bell, A. T.; Sadhukhan, P.

1974-01-01

Potassium hydroxide was subjected to the products of an electrical discharge sustained in oxygen and produced both potassium peroxide and superoxide. The conversion to higher oxides was shown to strongly depend upon the particle size of KOH, the position of KOH in the discharge zone, and the operating conditions of the discharge. Similar experiments were performed with hydroxides of lithium and calcium which do not form superoxides, but are converted to peroxides. The yields of peroxides were shown to strongly depend upon the operating conditions of the discharge. The absence of superoxides and the presence of peroxides of lithium and calcium was explained from the consideration of relative thermodynamic stability of the oxides of lithium and calcium. Thermogravimetric analysis was shown to provide a more accurate means for determining the amount of KO2 than previous methods.

Solar thermal power & gas turbine hybrid design with molten salt storage tank

NASA Astrophysics Data System (ADS)

Martín, Fernando; Wiesenberg, Ralf; Santana, Domingo

2017-06-01

Taking into consideration the need to decelerate the global climatic change, power generation has to shift from burning fossil fuel to renewable energy source in short medium period of time. In this work, we are presenting a new model of a solar-gas natural hybrid power cycle with the main aim of decoupling the solar generation system from the gas turbine system. The objective is to have high solar power contribution compared to conventional ISCC plants [2], producing firm and dispatchable electricity at the same time. The decoupling is motivated by the low solar contribution reached by the ISCC, which is technically limited to maximum of 15%, [4]. In our case, we have implemented a solar tower with molten salts as working fluid. Central receiver systems get higher performance than others systems, like parabolic trough technology [1], due to the higher temperature achieved in the heat transferred fluid HTF, close to 560°C.

Higher thermostability of l-lactate dehydrogenases is a key factor in decreasing the optical purity of d-lactic acid produced from Lactobacillus coryniformis.

PubMed

Gu, Sol-A; Jun, Chanha; Joo, Jeong Chan; Kim, Seil; Lee, Seung Hwan; Kim, Yong Hwan

2014-05-10

Lactobacillus coryniformis is known to produce d-lactic acid as a dominant fermentation product at a cultivation temperature of approximately 30°C. However, the considerable production of l-lactic acid is observed when the fermentation temperature is greater than 40°C. Because optically pure lactates are synthesized from pyruvate by the catalysis of chiral-specific d- or l-lactate dehydrogenase, the higher thermostability of l-LDHs is assumed to be one of the key factors decreasing the optical purity of d-lactic acid produced from L. coryniformis at high temperature. To verify this hypothesis, two types of d-ldh genes and six types of l-ldh genes based on the genomic information of L. coryniformis were synthesized and expressed in Escherichia coli. Among the LDHs tested, five LDHs showed activity and were used to construct polyclonal antibodies. d-LDH1, l-LDH2, and l-LDH3 were found to be expressed in L. coryniformis by Western blotting analysis. The half-life values (t1/2) of the LDHs at 40°C were estimated to be 10.50, 41.76, and 2311min, and the T50(10) values were 39.50, 39.90, and 58.60°C, respectively. In addition, the Tm values were 36.0, 41.0, and 62.4°C, respectively, which indicates that l-LDH has greater thermostability than d-LDH. The higher thermostability of l-LDHs compared with that of d-LDH1 may be a major reason why the enantiopurity of d-lactic acid is decreased at high fermentation temperatures. The key enzymes characterized will suggest a direction for the design of genetically modified lactic acid bacteria to produce optically pure d-lactic acid. Copyright © 2014 Elsevier Inc. All rights reserved.

Investigating ultra high-enthalpy geothermal systems: a collaborative initiative to promote scientific opportunities

NASA Astrophysics Data System (ADS)

Elders, W. A.; Nielson, D.; Schiffman, P.; Schriener, A., Jr.

2014-12-01

Scientists, engineers, and policy makers gathered at a workshop in the San Bernardino Mountains of southern California in October 2013 to discuss the science and technology involved in developing high-enthalpy geothermal fields. A typical high-enthalpy geothermal well between 2000 and 3000 m deep produces a mixture of hot water and steam at 200-300 °C that can be used to generate about 5-10 MWe of electric power. The theme of the workshop was to explore the feasibility and economic potential of increasing the power output of geothermal wells by an order of magnitude by drilling deeper to reach much higher pressures and temperatures. Development of higher enthalpy geothermal systems for power production has obvious advantages; specifically higher temperatures yield higher power outputs per well so that fewer wells are needed, leading to smaller environmental footprints for a given size of power plant. Plans for resource assessment and drilling in such higher enthalpy areas are already underway in Iceland, New Zealand, and Japan. There is considerable potential for similar developments in other countries that already have a large production of electricity from geothermal steam, such as Mexico, the Philippines, Indonesia, Italy, and the USA. However drilling deeper involves technical and economic challenges. One approach to mitigating the cost issue is to form a consortium of industry, government and academia to share the costs and broaden the scope of investigation. An excellent example of such collaboration is the Iceland Deep Drilling Project (IDDP), which is investigating the economic feasibility of producing electricity from supercritical geothermal reservoirs, and this approach could serve as model for future developments elsewhere. A planning committee was formed to explore creating a similar initiative in the USA.

Instream flow assessment and economic valuation: a survey of nonmarket benefits research

USGS Publications Warehouse

Douglas, Aaron J.; Johnson, Richard L.

1993-01-01

Instream flow benefits for United States streams and rivers have recently been investigated by a number of resource economists. These valuation efforts differ in scope, method, and quantitative results. An assessment and review of these valuation efforts is presented. The various sources of differences in non‐market values produced by these studies are explored in some detail. The considerable difficulty of producing estimates of instream flow benefits values that consider all of the pertinent policy and technical issues is delineated in various policy contexts. Evidence is presented that indicates that the considerable policy impact of recent research on this topic is justified despite considerable variation in the magnitude of the estimates.

Methylene Blue Removal by Biochars from Food Industry By-Products

NASA Astrophysics Data System (ADS)

Orfanos, Alexis; Manariotis, Ioannis D.; Karapanagioti, Hrissi K.

2016-04-01

Biomass produced by food industries is mainly used as feedstock or in composting. In recent years, considerable research effort has been focused on the production of biochar under oxygen-limited conditions from carbon-rich biomass, such as food industry by-products, as mitigation measure for global warming once it is used as a soil amendment. The present study presents the findings of an experimental work, which investigated the use of different biochars for the removal of methylene blue (MB) from aqueous solutions. Biochars were produced from malt spent rootlets (MSR) from brewering and espresso coffee residue from coffee shops. MSR was pyrolyzed at temperatures of 300, 400, 500, 750, 850, and 900oC and the coffee residue was pyrolyzed at 850oC. The charring process was performed under limited-oxygen conditions using specialized containers. The surface area and the porosity of the materials were determined. Batch experiments were conducted in order to evaluate the sorption capacity of the above materials, and samples were agitated for 24 h at 25oC, at an optimum pH of about 7. Kinetic analysis was conducted over a period of 24 h, and isotherm studies were also constructed. The surface area of biochar produced from MSR and the MB removal were considerably increased at pyrolysis temperatures higher than 500oC. At 850oC, the maximum surface area value (300 m2 g-1) was observed, and the MB sorption capacity was 99 mg g-1. Based on the kinetic experimental data, sorption capacities at 120 min were over 58% of their equilibrium values for the biochars used. The maximum MB sorption capacity, based on the isotherm data, was 130 mg g-1, for the two biochars employed.

Fracture Response Enhancement Of Aluminum Using In-Situ Selective Reinforcement

NASA Technical Reports Server (NTRS)

Abada, Christopher H.; Farley, Gary L.; Hyer, Michael W.

2006-01-01

A computer-based parametric study of the effect of reinforcement architectures on fracture response of aluminum compact-tension (CT) specimens is performed. Eleven different reinforcement architectures consisting of rectangular and triangular cross-section reinforcements were evaluated. Reinforced specimens produced between 13 and 28 percent higher fracture load than achieved with the unreinforced case. Reinforcements with blunt leading edges (rectangular reinforcements) exhibited superior performance relative to the triangular reinforcements with sharp leading edges. Relative to the rectangular reinforcements, the most important architectural feature was reinforcement thickness. At failure, the reinforcements carried between 58 and 85 percent of the load applied to the specimen, suggesting that there is considerable load transfer between the base material and the reinforcement.

Damping Estimation from Free Decay Responses of Cables with MR Dampers.

PubMed

Weber, Felix; Distl, Hans

2015-01-01

This paper discusses the damping measurements on cables with real-time controlled MR dampers that were performed on a laboratory scale single strand cable and on cables of the Sutong Bridge, China. The control approach aims at producing amplitude and frequency independent cable damping which is confirmed by the tests. The experimentally obtained cable damping in comparison to the theoretical value due to optimal linear viscous damping reveals that support conditions of the cable anchors, force tracking errors in the actual MR damper force, energy spillover to higher modes, and excitation and sensor cables hanging on the stay cable must be taken into consideration for the interpretation of the identified cable damping values.

Damping Estimation from Free Decay Responses of Cables with MR Dampers

PubMed Central

Weber, Felix; Distl, Hans

2015-01-01

This paper discusses the damping measurements on cables with real-time controlled MR dampers that were performed on a laboratory scale single strand cable and on cables of the Sutong Bridge, China. The control approach aims at producing amplitude and frequency independent cable damping which is confirmed by the tests. The experimentally obtained cable damping in comparison to the theoretical value due to optimal linear viscous damping reveals that support conditions of the cable anchors, force tracking errors in the actual MR damper force, energy spillover to higher modes, and excitation and sensor cables hanging on the stay cable must be taken into consideration for the interpretation of the identified cable damping values. PMID:26167537

Thermal comfort of aeroplane seats: influence of different seat materials and the use of laboratory test methods.

PubMed

Bartels, Volkmar T

2003-07-01

This study determined the influence of different cover and cushion materials on the thermal comfort of aeroplane seats. Different materials as well as ready made seats were investigated by the physiological laboratory test methods Skin Model and seat comfort tester. Additionally, seat trials with human test subjects were performed in a climatic chamber. Results show that a fabric cover produces a considerably higher sweat transport than leather. A three-dimensional knitted spacer fabric turns out to be the better cushion alternative in comparison to a moulded foam pad. Results from the physiological laboratory test methods nicely correspond to the seat trials with human test subjects.

Effects of two-temperature model on cascade evolution in Ni and NiFe

DOE PAGES

Samolyuk, German D.; Xue, Haizhou; Bei, Hongbin; ...

2016-07-05

We perform molecular dynamics simulations of Ni ion cascades in Ni and equiatomic NiFe under the following conditions: (a) classical molecular dynamics (MD) simulations without consideration of electronic energy loss, (b) classical MD simulations with the electronic stopping included, and (c) using the coupled two-temperature MD (2T-MD) model that incorporates both the electronic stopping and the electron-phonon interactions. Our results indicate that the electronic effects are more profound in the higher-energy cascades, and that the 2T-MD model results in a smaller amount of surviving damage and smaller defect clusters, while less damage is produced in NiFe than in Ni.

Cloning strategies for heterologous expression of the bacteriocin enterocin A by Lactobacillus sakei Lb790, Lb. plantarum NC8 and Lb. casei CECT475.

PubMed

Jiménez, Juan J; Diep, Dzung B; Borrero, Juan; Gútiez, Loreto; Arbulu, Sara; Nes, Ingolf F; Herranz, Carmen; Cintas, Luis M; Hernández, Pablo E

2015-10-15

Bacteriocins produced by lactic acid bacteria (LAB) attract considerable interest as natural and nontoxic food preservatives and as therapeutics whereas the bacteriocin-producing LAB are considered potential probiotics for food, human and veterinary applications, and in the animal production field. Within LAB the lactobacilli are increasingly used as starter cultures for food preservation and as probiotics. The lactobacilli are also natural inhabitants of the gastrointestinal (GI) tract and attractive vectors for delivery of therapeutic peptides and proteins, and for production of bioactive peptides. Research efforts for production of bacteriocins in heterologous hosts should be performed if the use of bacteriocins and the LAB bacteriocin-producers is ever to meet the high expectations deposited in these antimicrobial peptides. The recombinant production and functional expression of bacteriocins by lactobacilli would have an additive effect on their probiotic functionality. The heterologous production of the bacteriocin enterocin A (EntA) was evaluated in different Lactobacillus spp. after fusion of the versatile Sec-dependent signal peptide (SP usp45 ) to mature EntA plus the EntA immunity gene (entA + entiA) (fragment UAI), and their cloning into plasmid vectors that permitted their inducible (pSIP409 and pSIP411) or constitutive (pMG36c) production. The amount, antimicrobial activity (AA) and specific antimicrobial activity (SAA) of the EntA produced by Lactobacillus sakei Lb790, Lb. plantarum NC8 and Lb. casei CECT475 transformed with the recombinant plasmids pSIP409UAI, pSIP411UAI and pMGUAI varied depending of the expression vector and the host strain. The Lb. casei CECT475 recombinant strains produced the largest amounts of EntA, with the highest AA and SAA. Supernatants from Lb. casei CECT (pSIP411UAI) showed a 4.9-fold higher production of EntA with a 22.8-fold higher AA and 4.7-fold higher SAA than those from Enterococcus faecium T136, the natural producer of EntA. Moreover, supernatants from Lb. casei CECT475 (pSIP411UAI) showed a 15.7- to 59.2-fold higher AA against Listeria spp. than those from E. faecium T136. Lb. casei CECT457 (pSIP411UAI) may be considered a promising recombinant host and cell factory for the production and functional expression of the antilisterial bacteriocin EntA.

Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Murty, K. L.; Charit, I.

2008-12-01

Generation-IV reactor design concepts envisioned thus far cater toward a common goal of providing safer, longer lasting, proliferation-resistant and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-IV reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This paper presents a summary of various Gen-IV reactor concepts, with emphasis on the structural materials issues depending on the specific application areas. This paper also discusses the challenges involved in using the existing materials under both service and off-normal conditions. Tasks become increasingly complex due to the operation of various fundamental phenomena like radiation-induced segregation, radiation-enhanced diffusion, precipitation, interactions between impurity elements and radiation-produced defects, swelling, helium generation and so forth. Further, high temperature capability (e.g. creep properties) of these materials is a critical, performance-limiting factor. It is demonstrated that novel alloy and microstructural design approaches coupled with new materials processing and fabrication techniques may mitigate the challenges, and the optimum system performance may be achieved under much demanding conditions.

Determination of Quality Criteria that Allow Differentiation Between Honey Adulterated with Sugar and Pure Honey.

PubMed

Nisbet, Cevat; Kazak, Filiz; Ardalı, Yuksel

2018-03-23

This study used various parameters of honey to develop a potentially more robust approach to the detection of adulterated honey. For this purpose, 25 multifloral, natural honey samples and 20 samples of adulterated honey produced by bees that had been fed supplementary sucrose syrup were analysed. The mean total phenolic content of the natural honeys was considerably higher than in the adulterated honeys at 157 ± 13 and 35.2 ± 7.3 mg GAE/100 g, respectively. Similarly, considerable variation was determined between natural and adulterated honeys in terms of total flavonoids (3.3 ± 0.3 and 2.1 ± 0.4 mg QE/100 g, respectively), antiradical activity (87.9 ± 12 and 163 ± 11 mg/mL, respectively) and proline content (202 ± 26 and 71.1 ± 21.6 mg/kg, respectively.) The potassium, phosphorus, calcium and magnesium contents of natural honeys were also higher than in adulterated honeys (P < 0.01). In conclusion, the determination of the proline level, phenolic content, antioxidant activity and mineral profile may collectively provide a more holistic method approach to the differentiation of natural and adulterated honey, and also for comparing their food values.

A dimeric form of a small-sized protein binder exhibits enhanced anti-tumor activity through prolonged blood circulation.

PubMed

Kim, Tae Yoon; Seo, Hyo-Deok; Lee, Joong-Jae; Kang, Jung Ae; Kim, Woo Sik; Kim, Hye-Min; Song, Ha-Yeon; Park, Ji Min; Lee, Dong-Eun; Kim, Hak-Sung

2018-06-10

Small-sized non-antibody scaffolds have attracted considerable interest as alternatives to immunoglobulin antibodies. However, their short half-life is considered a drawback in the development of therapeutic agents. Here we demonstrate that a homo-dimeric form of a repebody enhances the anti-tumor activity than a monomeric form through prolonged blood circulation. Spytag and spycatcher were genetically fused to the C-terminus of a respective human IL-6-specific repebody, and the resulting two repebody constructs were mixed at an equimolar ratio to produce a homo-dimeric form through interaction between spytag and spycatcher. The homo-dimeric repebody was detected as a single band in the SDS-PAGE analysis with an expected molecular size (78 kDa), showing high stability and homogeneity. The dimeric repebody was shown to simultaneously accommodate two hIL-6 molecules, and its binding affinity for hIL-6 was estimated to be comparable to a monomeric repebody. The serum concentration of the dimeric repebody was observed to be about 5.5 times higher than a monomeric repebody, consequently leading to considerably higher tumor suppression effect in human tumor xenograft mice. The present approach can be effectively used for prolonging the blood half-life of small-sized protein binders, resulting in enhanced therapeutic efficacy. Copyright © 2018 Elsevier B.V. All rights reserved.

The 2-Oxoacid Dehydrogenase Complexes in Mitochondria Can Produce Superoxide/Hydrogen Peroxide at Much Higher Rates Than Complex I*

PubMed Central

Quinlan, Casey L.; Goncalves, Renata L. S.; Hey-Mogensen, Martin; Yadava, Nagendra; Bunik, Victoria I.; Brand, Martin D.

2014-01-01

Several flavin-dependent enzymes of the mitochondrial matrix utilize NAD+ or NADH at about the same operating redox potential as the NADH/NAD+ pool and comprise the NADH/NAD+ isopotential enzyme group. Complex I (specifically the flavin, site IF) is often regarded as the major source of matrix superoxide/H2O2 production at this redox potential. However, the 2-oxoglutarate dehydrogenase (OGDH), branched-chain 2-oxoacid dehydrogenase (BCKDH), and pyruvate dehydrogenase (PDH) complexes are also capable of considerable superoxide/H2O2 production. To differentiate the superoxide/H2O2-producing capacities of these different mitochondrial sites in situ, we compared the observed rates of H2O2 production over a range of different NAD(P)H reduction levels in isolated skeletal muscle mitochondria under conditions that favored superoxide/H2O2 production from complex I, the OGDH complex, the BCKDH complex, or the PDH complex. The rates from all four complexes increased at higher NAD(P)H/NAD(P)+ ratios, although the 2-oxoacid dehydrogenase complexes produced superoxide/H2O2 at high rates only when oxidizing their specific 2-oxoacid substrates and not in the reverse reaction from NADH. At optimal conditions for each system, superoxide/H2O2 was produced by the OGDH complex at about twice the rate from the PDH complex, four times the rate from the BCKDH complex, and eight times the rate from site IF of complex I. Depending on the substrates present, the dominant sites of superoxide/H2O2 production at the level of NADH may be the OGDH and PDH complexes, but these activities may often be misattributed to complex I. PMID:24515115

Simulation modeling to explore the effects of length-based harvest regulations for Ictalurus fisheries

USGS Publications Warehouse

Stewart, David R.; Long, James M.; Shoup, Daniel E.

2016-01-01

Management of Blue Catfish Ictalurus furcatus and Channel Catfish I. punctatus for trophy production has recently become more common. Typically, trophy management is attempted with length-based regulations that allow for the moderate harvest of small fish but restrict the harvest of larger fish. However, the specific regulations used vary considerably across populations, and no modeling efforts have evaluated their effectiveness. We used simulation modeling to compare total yield, trophy biomass (Btrophy), and sustainability (spawning potential ratio [SPR] > 0.30) of Blue Catfish and Channel Catfish populations under three scenarios: (1) current regulation (typically a length-based trophy regulation), (2) the best-performing minimum length regulation (MLRbest), and (3) the best-performing length-based trophy catfish regulation (LTRbest; “best performing” was defined as the regulation that maximized yield, Btrophy, and sustainability). The Btrophy produced did not differ among the three scenarios. For each fishery, the MLRbest and LTRbest produced greater yield (>22% more) than the current regulation and maintained sustainability at higher finite exploitation rates (>0.30) than the current regulation. The MLRbest and LTRbest produced similar yields and SPRs for Channel Catfish and similar yields for Blue Catfish; however, the MLRbest for Blue Catfish produced more resilient fisheries (higher SPR) than the LTRbest. Overall, the variation in yield, Btrophy, and SPR among populations was greater than the variation among regulations applied to any given population, suggesting that population-specific regulations may be preferable to regulations applied to geographic regions. We conclude that LTRs are useful for improving catfish yield and maintaining sustainability without overly restricting harvest but are not effective at increasing the Btrophy of catfish.

Study of DT-diaphorase in pigment-producing cells.

PubMed

Smit, N P; Hoogduijn, M J; Riley, P A; Pavel, S

1999-11-01

DT-diaphorase is an FAD-containing enzyme capable of a two-electron reduction of ortho- and paraquinones. Nicotinamide coenzymes (NADH + H+ and NADPH + H+) serve as hydrogen sources in these reactions. The role of DT-diaphorase has been thoroughly investigated in situations when the enzyme is able to reduce exogenous and endogenous quinones, hence protecting the cells against these reactive intermediates. The enzyme has also been studied in connection with its ability to activate some quinoid cytostatics. It is surprising that DT-diaphorase has never been investigated in pigment-producing cells that are known to generate considerable amounts of ortho-quinones. Using a spectrophotometric method we could readily measure the activity of DT-diaphorase in epidermis and various cultured pigment cells. The melanocytes isolated from dark skin showed generally higher DT-diaphorase activity than those from fair skin samples. Also, darkly pigmented congenital naevus cells exhibited higher activity of this enzyme. The most striking was the high DT-diaphorase activity in melanoma cell cultures. In these cells DT-diaphorase activity could be induced by incubation of the cells with 4-hydroxyanisole. A similar effect was seen when a catechol-O-methyltransferase (COMT) inhibitor (3-(3,4-dihydroxy-5-nitrobenzylidene)-2,4-pentanedione (OR-462) was utilised. The induction was inhibited by cyclohexidine.

Differentiation of Cannabis subspecies by THCA synthase gene analysis using RFLP.

PubMed

Cirovic, Natasa; Kecmanovic, Miljana; Keckarevic, Dusan; Keckarevic Markovic, Milica

2017-10-01

Cannabis sativa subspecies, known as industrial hemp (C. sativa sativa) and marijuana (C. sativa indica) show no evident morphological distinctions, but they contain different levels of psychoactive Δ-9-tetrahidrocanabinol (THC), with considerably higher concentration in marijuana than in hemp. C. sativa subspecies differ in sequence of tetrahydrocannabinolic acid (THCA) synthase gene, responsible for THC production, and only one active copy of the gene, distinctive for marijuana, is capable of producing THC in concentration more then 0,3% in dried plants, usually punishable by the law. Twenty different samples of marijuana that contain THC in concentration more then 0,3% and three varieties of industrial hemp were analyzed for presence of an active copy of THCA synthase gene using in-house developed restriction fragment length polymorphism (RFLP) method All twenty samples of marijuana were positive for the active copy of THCA synthase gene, 16 of them heterozygous. All three varieties of industrial hemp were homozygous for inactive copy. An algorithm for the fast and accurate forensic analysis of samples suspected to be marijuana was constructed, answering the question if an analyzed sample is capable of producing THC in concentrations higher than 0.3%. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Reproductive success of Macrotermes bellicosus (Isoptera, Macrotermitinae) in two neighbouring habitats.

PubMed

Korb, Judith; Linsenmair, Karl Eduard

1999-02-01

The fungus-cultivating, mound-building termite Macrotermes bellicosus can reach high densities in African savannah habitats, whereas in forests it is comparatively rare and is only found in relatively open areas. Earlier studies in the Comoé National Park (Côte d'Ivoire, West Africa) suggested that this might be because ambient temperatures are lower in the forest than the savannah. Therefore, forests seem to be suboptimal habitats. During 3 consecutive years we measured relevant fitness parameters in both habitats to test this hypothesis. Colonies in the savannah had higher reproductive outputs. They reproduced annually, producing high numbers of offspring (alates), whereas forest colonies reproduced on average only once every 3 years and even then only low numbers of alates were produced. Annual growth of mound height, which can be regarded as an indicator of colony growth, varied considerably between individual colonies and years. Nevertheless, in two years the growth rate of mounds in the shrub savannah was higher than that of mounds in the gallery forest. Unexpectedly, survival probability as calculated by Kaplan Meier analysis was much lower for colonies in the shrub savannah than for colonies in the gallery forest. Using these data in a computer simulation we calculated lifetime reproductive success (LRS) for an average colony in both habitats. As LRS was much higher for colonies in the shrub savannah than in the gallery forest, these results confirmed our suggestion that the forest is a suboptimal habitat for M. bellicosus.

Comparative study of spasmolytic properties, antioxidant activity and phenolic content of Arbutus unedo from Montenegro and Greece.

PubMed

Pavlović, Dragana R; Branković, Suzana; Kovačević, Nada; Kitić, Dušanka; Veljković, Slavimir

2011-05-01

Arbutus unedo leaf is used traditionally for gastrointestinal complaints. Ethanol extracts from Arbutus unedo collected in both Montenegro (AuM) and Greece (AuG) were found to decrease the ileal basal tonus, with AuG producing a significantly higher (p < 0.05) reduction in contractile response to acetylcholine. AuM and AuG relaxed 80 mM K(+) induced contractions and shifted the Ca(++) concentration-response curves to the right, similar to that caused by verapamil, suggesting that the spasmolytic effect was induced through calcium channel inhibition. The antioxidant activity of AuM and AuG and the phenolic content of the extracts and dry plant material were studied, and both extracts were found to possess considerable antioxidant properties. AuG showed a stronger in vitro antioxidative activity in the DPPH assay and in the TBA test. Polyphenol, tannin and flavonoid levels were higher in AuG, supporting the more potent spasmolytic and antioxidative effects, whereas the arbutin content was higher in dry plant material collected in Montenegro. Copyright © 2011 John Wiley & Sons, Ltd.

Cultivation of Chlorella vulgaris using different sources of carbon and its impact on lipid production

NASA Astrophysics Data System (ADS)

Fransiscus, Yunus; Purwanto, Edy

2017-05-01

A cultivation process of Chlorella vulgaris has been done in different treatment to investigate the optimum condition for lipid production. Firstly, autotroph and heterotroph condition have been applied to test the significance impact of carbon availability to the growth and lipid production of Chlorella vulgaris. And for the same purpose, heterotroph condition using glucose, fructose and sucrose as carbon sources was independently implemented. The growth rate of Chlorella vulgaris in autotroph condition was much slower than those in heterotroph. The different sources of carbon gave no significant different in the growth pattern, but in term of lipid production it was presented a considerable result. At lower concentration (3 and 6 gr/L) of carbon sources there was only slight different in lipid production level. At higher concentration (12 gr/L) glucose as a carbon source produced the highest result, 60.18% (w/w) compared to fructose and sucrose that produced 27.34% (w/w) and 18.19% (w/w) respectively.

Biohydrogen and methane production via a two-step process using an acid pretreated native microalgae consortium.

PubMed

Carrillo-Reyes, Julian; Buitrón, Germán

2016-12-01

A native microalgae consortium treated under thermal-acidic hydrolysis was used to produce hydrogen and methane in a two-step sequential process. Different acid concentrations were tested, generating hydrogen and methane yields of up to 45mLH 2 gVS -1 and 432mLCH 4 gVS -1 , respectively. The hydrogen production step solubilized the particulate COD (chemical oxygen demand) up to 30%, creating considerable amounts of volatile fatty acids (up to 10gCODL -1 ). It was observed that lower acid concentration presented higher hydrogen and methane production potential. The results revealed that thermal acid hydrolysis of a native microalgae consortium is a simple but effective strategy for producing hydrogen and methane in the sequential process. In addition to COD removal (50-70%), this method resulted in an energy recovery of up to 15.9kJ per g of volatile solids of microalgae biomass, one of the highest reported. Copyright © 2016 Elsevier Ltd. All rights reserved.

Search for new resonances decaying into boosted W, Z and H bosons at CMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krohn, Michael; Vernieri, Caterina

2017-10-05

An overview of the searches for new heavy resonances decaying to standard model (SM) bosons at the TeV mass scale is presented. Results are based on data corresponding to an integrated luminosity up to aboutmore » $$36\\; \\mathrm{fb}^{-1}$$ recorded in proton-proton collisions at $$\\sqrt{s}=13$$ TeV with the CMS detector at the Large Hadron Collider at CERN. The bosons coming from the resonance decay can be W, Z, or the SM Higgs. For very heavy resonances, bosons are produced with momentum considerably higher than their mass, modifying in a very appreciable way the event topology. The quarks originated from the hadronic decay of the SM bosons will be collimated into a smaller area such that they are clustered within a single large cone jet. Dedicated reconstruction techniques are used to distinguish the merged decay products of W, Z and H bosons produced with high transverse momentum, from jets that originate from single partons.« less

Modification of Low-Alloy Steel Surface by High-Temperature Gas Nitriding Plus Tempering

NASA Astrophysics Data System (ADS)

Jiao, Dongling; Li, Minsong; Ding, Hongzhen; Qiu, Wanqi; Luo, Chengping

2018-02-01

The low-alloy steel was nitrided in a pure NH3 gas atmosphere at 640 660 °C for 2 h, i.e., high-temperature gas nitriding (HTGN), followed by tempering at 225 °C, which can produce a high property surface coating without brittle compound (white) layer. The steel was also plasma nitriding for comparison. The composition, microstructure and microhardness of the nitrided and tempered specimens were examined, and their tribological behavior investigated. The results showed that the as-gas-nitrided layer consisted of a white layer composed of FeN0.095 phase (nitrided austenite) and a diffusional zone underneath the white layer. After tempering, the white layer was decomposed to a nano-sized (α-Fe + γ'-Fe4N + retained austenite) bainitic microstructure with a high hardness of 1150HV/25 g. Wear test results showed that the wear resistance and wear coefficient yielded by the complex HTGN plus tempering were considerably higher and lower, respectively, than those produced by the conventional plasma nitriding.

Residues of azoxystrobin from grapes to raisins.

PubMed

Lentza-Rizos, Chaido; Avramides, Elizabeth J; Kokkinaki, Kalliopi

2006-01-11

Azoxystrobin, a fungicide of the strobilurin group, has an European Union maximum residue level (MRL) of 2 mg/kg for grapes. This work aimed to assess residues on fresh and washed grapes and on raisins following processing with (i) alkali treatment and sun drying and (ii) sun drying only. QUADRIS 25% SC was applied according to good agricultural practice for two consecutive years on a typical cv. Thomson seedless and a seed-producing clone. Samples were collected 0, 15, and 21 days postapplication and analyzed using gas chromatography/electron capture detection; recoveries were 86 +/- 12% for grapes and 99 +/- 15% for raisins. Residues on grapes were 0.49-1.84 mg/kg, and washing removed 75% of the residue. Residues in raisins produced from seedless grapes were 0.51-1.49 (treatment 1) and 1.42-2.08 mg/kg (treatment 2), with residue transfer factors sometimes >1, even following alkali treatment, which reduced residues considerably. To avoid trade problems, a higher MRL for raisins is necessary.

The spark discharge synthesis of amino acids from various hydrocarbons

NASA Technical Reports Server (NTRS)

Ring, D.; Miller, S. L.

1984-01-01

The spark discharge synthesis of amino acids using an atmosphere of CH4+N2+H2O+NH3 has been investigated with variable pNH3. The amino acids produced using higher hydrocarbons (ethane, ethylene, acetylene, propane, butane, and isobutane) instead of CH4 were also investigated. There was considerable range in the absolute yields of amino acids, but the yields relative to glycine (or alpha-amino-n-butyric acid) were more uniform. The relative yields of the C3 to C6 aliphatic alpha-amino acids are nearly the same (with a few exceptions) with all the hydrocarbons. The glycine yields are more variable. The precursors to the C3-C6 aliphatic amino acids seem to be produced in the same process, which is separate from the synthesis of glycine precursors. It may be possible to use these relative yields as a signature for a spark discharge synthesis provided corrections can be made for subsequent decomposition events (e.g. in the Murchison meteorite).

Problems in processing Rheinische Braunkohle (soft coal) (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

von Hartmann, G.B.

At Wesseling, difficulties were encountered with the hydrogenation of Rhine brown coal. The hydrogenation reaction was proceeding too rapidly at 600 atm pressure under relatively low temperature and throughput conditions. This caused a build-up of ''caviar'' deposits containing ash and asphalts. This flocculation of asphalt seemed to arise because the rapid reaction produced a liquid medium unable to hold the heavy asphalt particles in suspension. A stronger paraffinic character of the oil was also a result. To obtain practical, problem-free yields, throughput had to be increased (from .4 kg/liter/hr to more than .5), and temperature had to be increased (frommore » 24.0 MV to 24,8 MV). Further, a considerable increase in sludge recycling was recommended. The Wesseling plant was unable to increase the temperature and throughput. However, more sludge was recycled, producing a paste better able to hold higher-molecular-weight particles in suspension. If this were not to solve the ''caviar'' deposit problems, further recommendations were suggested including addition of more heavy oil.« less

Flow sensing by pinniped whiskers

PubMed Central

Miersch, L.; Hanke, W.; Wieskotten, S.; Hanke, F. D.; Oeffner, J.; Leder, A.; Brede, M.; Witte, M.; Dehnhardt, G.

2011-01-01

Beside their haptic function, vibrissae of harbour seals (Phocidae) and California sea lions (Otariidae) both represent highly sensitive hydrodynamic receptor systems, although their vibrissal hair shafts differ considerably in structure. To quantify the sensory performance of both hair types, isolated single whiskers were used to measure vortex shedding frequencies produced in the wake of a cylinder immersed in a rotational flow tank. These measurements revealed that both whisker types were able to detect the vortex shedding frequency but differed considerably with respect to the signal-to-noise ratio (SNR). While the signal detected by sea lion whiskers was substantially corrupted by noise, harbour seal whiskers showed a higher SNR with largely reduced noise. However, further analysis revealed that in sea lion whiskers, each noise signal contained a dominant frequency suggested to function as a characteristic carrier signal. While in harbour seal whiskers the unique surface structure explains its high sensitivity, this more or less steady fundamental frequency might represent the mechanism underlying hydrodynamic reception in the fast swimming sea lion by being modulated in response to hydrodynamic stimuli impinging on the hair. PMID:21969689

Evaluation of GOES encoder lamps

NASA Technical Reports Server (NTRS)

Viehmann, W.; Helmold, N.

1983-01-01

Aging characteristics and life expectancies of flight quality, tungsten filament, encoder lamps are similar to those of 'commercial' grade gas filled lamps of similar construction, filament material and filament temperature. The aging and final failure by filament burnout are caused by single crystal growth over large portions of the filament with the concomitant development of facets and notches resulting in reduction of cross section and mechanical weakening of the filament. The life expectancy of presently produced lamps is about one year at their nominal operating voltage of five volts dc. At 4.5 volts, it is about two years. These life times are considerably shorter, and the degradation rates of lamp current and light flux are considerably higher, than were observed in the laboratory and in orbit on lamps of the same type manufactured more than a decade ago. It is speculated that the filaments of these earlier lamps contained a crystallization retarding dopant, possibly thorium oxide. To obtain the desired life expectancy of or = to four years in present lamps, operating voltages of or = to four volts dc would be required.

Multi-susceptibile Single-Phased Ceramics with Both Considerable Magnetic and Dielectric Properties by Selectively Doping

PubMed Central

Liu, Chuyang; Zhang, Yujing; Jia, Jingguo; Sui, Qiang; Ma, Ning; Du, Piyi

2015-01-01

Multiferroic ceramics with extraordinary susceptibilities coexisting are vitally important for the multi-functionality and integration of electronic devices. However, multiferroic composites, as the most potential candidates, will introduce inevitable interface deficiencies and thus dielectric loss from dissimilar phases. In this study, single-phased ferrite ceramics with considerable magnetic and dielectric performances appearing simultaneously were fabricated by doping target ions in higher valence than that of Fe3+, such as Ti4+, Nb5+ and Zr4+, into BaFe12O19. In terms of charge balance, Fe3+/Fe2+ pair dipoles are produced through the substitution of Fe3+ by high-valenced ions. The electron hopping between Fe3+ and Fe2+ ions results in colossal permittivity. Whilst the single-phased ceramics doped by target ions exhibit low dielectric loss naturally due to the diminishment of interfacial polarization and still maintain typical magnetic properties. This study provides a convenient method to attain practicable materials with both outstanding magnetic and dielectric properties, which may be of interest to integration and multi-functionality of electronic devices. PMID:25835175

Multi-susceptibile single-phased ceramics with both considerable magnetic and dielectric properties by selectively doping.

PubMed

Liu, Chuyang; Zhang, Yujing; Jia, Jingguo; Sui, Qiang; Ma, Ning; Du, Piyi

2015-04-02

Multiferroic ceramics with extraordinary susceptibilities coexisting are vitally important for the multi-functionality and integration of electronic devices. However, multiferroic composites, as the most potential candidates, will introduce inevitable interface deficiencies and thus dielectric loss from dissimilar phases. In this study, single-phased ferrite ceramics with considerable magnetic and dielectric performances appearing simultaneously were fabricated by doping target ions in higher valence than that of Fe(3+), such as Ti(4+), Nb(5+) and Zr(4+), into BaFe12O19. In terms of charge balance, Fe(3+)/Fe(2+) pair dipoles are produced through the substitution of Fe(3+) by high-valenced ions. The electron hopping between Fe(3+) and Fe(2+) ions results in colossal permittivity. Whilst the single-phased ceramics doped by target ions exhibit low dielectric loss naturally due to the diminishment of interfacial polarization and still maintain typical magnetic properties. This study provides a convenient method to attain practicable materials with both outstanding magnetic and dielectric properties, which may be of interest to integration and multi-functionality of electronic devices.

Multi-susceptibile Single-Phased Ceramics with Both Considerable Magnetic and Dielectric Properties by Selectively Doping

NASA Astrophysics Data System (ADS)

Liu, Chuyang; Zhang, Yujing; Jia, Jingguo; Sui, Qiang; Ma, Ning; Du, Piyi

2015-04-01

Multiferroic ceramics with extraordinary susceptibilities coexisting are vitally important for the multi-functionality and integration of electronic devices. However, multiferroic composites, as the most potential candidates, will introduce inevitable interface deficiencies and thus dielectric loss from dissimilar phases. In this study, single-phased ferrite ceramics with considerable magnetic and dielectric performances appearing simultaneously were fabricated by doping target ions in higher valence than that of Fe3+, such as Ti4+, Nb5+ and Zr4+, into BaFe12O19. In terms of charge balance, Fe3+/Fe2+ pair dipoles are produced through the substitution of Fe3+ by high-valenced ions. The electron hopping between Fe3+ and Fe2+ ions results in colossal permittivity. Whilst the single-phased ceramics doped by target ions exhibit low dielectric loss naturally due to the diminishment of interfacial polarization and still maintain typical magnetic properties. This study provides a convenient method to attain practicable materials with both outstanding magnetic and dielectric properties, which may be of interest to integration and multi-functionality of electronic devices.

Educational Fund Raising: Principles and Practice. American Council on Education Series on Higher Education.

ERIC Educational Resources Information Center

Worth, Michael J., Ed.

This volume offers 36 papers on higher education fundraising. Major topics treated are the development function, foundations of fund raising, annual giving, major gifts, campaigns, corporate and foundation support, special constituencies, managing development programs, special considerations for institutions, and special considerations for the…

Radiological considerations for the operation of the Advanced Photon Source storage ring (revised).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, H. J.

2002-05-02

This report deals with the radiological considerations of operations using 7700-MeV positron and electron beams in the storage ring (SR) tunnel. The radiological considerations addressed include the following: prompt secondary radiation (bremsstrahlung, giant resonance neutrons, medium and high energy neutrons, and muons) produced by electrons/positrons interacting in a beam stop or by particle losses in the component structures; skyshine radiation, which produces a radiation field in nearby areas and at the nearest off-site location; radioactive gases produced by neutron irradiation of air in the vicinity of a particle loss site; noxious gases (ozone and others) produced in air by themore » escaping bremsstrahlung radiation that results from absorbing particles in the components or by synchrotron radiation escaping into the tunnel; activation of the storage ring components that results in a residual radiation field in the vicinity of these materials following shutdown; potential activation of water used for cooling the magnets and other purposes in the SR tunnel; evaluation of the radiation fields due to escaping synchrotron radiation and gas bremsstrahlung. Estimated dose rates outside of the tunnel, in the early assembly area (EAA), and in the Experiment Hall for several modes of operation (including potential safety envelope beam power, normal beam power, and MCI (maximum credible incident) conditions) have been computed. Shielding in the first optics enclosure (FOE) and for the photon beamlines is discussed in ANL/APS/TB-7 (IPE 93), but additional radiological considerations for the ASD diagnostic beamlines are contained in Appendix C. Although the calculations refer to positrons, electron operation would produce essentially the same effects for the identical assumptions.« less

Structure Line Detection from LIDAR Point Clouds Using Topological Elevation Analysis

NASA Astrophysics Data System (ADS)

Lo, C. Y.; Chen, L. C.

2012-07-01

Airborne LIDAR point clouds, which have considerable points on object surfaces, are essential to building modeling. In the last two decades, studies have developed different approaches to identify structure lines using two main approaches, data-driven and modeldriven. These studies have shown that automatic modeling processes depend on certain considerations, such as used thresholds, initial value, designed formulas, and predefined cues. Following the development of laser scanning systems, scanning rates have increased and can provide point clouds with higher point density. Therefore, this study proposes using topological elevation analysis (TEA) to detect structure lines instead of threshold-dependent concepts and predefined constraints. This analysis contains two parts: data pre-processing and structure line detection. To preserve the original elevation information, a pseudo-grid for generating digital surface models is produced during the first part. The highest point in each grid is set as the elevation value, and its original threedimensional position is preserved. In the second part, using TEA, the structure lines are identified based on the topology of local elevation changes in two directions. Because structure lines can contain certain geometric properties, their locations have small relieves in the radial direction and steep elevation changes in the circular direction. Following the proposed approach, TEA can be used to determine 3D line information without selecting thresholds. For validation, the TEA results are compared with those of the region growing approach. The results indicate that the proposed method can produce structure lines using dense point clouds.

Balanced Trade-Offs between Alternative Strategies Shape the Response of C. elegans Reproduction to Chronic Heat Stress

PubMed Central

Aprison, Erin Z.; Ruvinsky, Ilya

2014-01-01

To ensure long-term reproductive success organisms have to cope with harsh environmental extremes. A reproductive strategy that simply maximizes offspring production is likely to be disadvantageous because it could lead to a catastrophic loss of fecundity under unfavorable conditions. To understand how an appropriate balance is achieved, we investigated reproductive performance of C. elegans under conditions of chronic heat stress. We found that following even prolonged exposure to temperatures at which none of the offspring survive, worms could recover and resume reproduction. The likelihood of producing viable offspring falls precipitously after exposure to temperatures greater than 28°C primarily due to sperm damage. Surprisingly, we found that worms that experienced higher temperatures can recover considerably better, provided they did not initiate ovulation. Therefore mechanisms controlling this process must play a crucial role in determining the probability of recovery. We show, however, that suppressing ovulation is only beneficial under relatively long stresses, whereas it is a disadvantageous strategy under shorter stresses of the same intensity. This is because the benefit of shutting down egg laying, and thus protecting the reproductive system, is negated by the cost associated with implementing this strategy – it takes considerable time to recover and produce offspring. We interpret these balanced trade-offs as a dynamic response of the C. elegans reproductive system to stress and an adaptation to life in variable and unpredictable conditions. PMID:25165831

Emissions of sulfur gases from wetlands

NASA Technical Reports Server (NTRS)

Hines, Mark E.

1992-01-01

Data on the emissions of sulfur gases from marine and freshwater wetlands are summarized with respect to wetland vegetation type and possible formation mechanisms. The current data base is largest for salt marshes inhabited by Spartina alterniflora. Both dimethyl sulfide (DMS) and hydrogen sulfide (H2S) dominate emissions from salt marshes, with lesser quantities of methyl mercaptan (MeSH), carbonyl sulfide (COS), carbon disulfide (CS2) and dimethyl disulfide (DMDS) being emitted. High emission rates of DMS are associated with vegetation that produces the DMS precursor dimethylsulfonionpropionate (DMSP). Although large quantities of H2S are produced in marshes, only a small percentage escapes to the atmosphere. High latitude marshes emit less sulfur gases than temperate ones, but DMS still dominates. Mangrove-inhabited wetlands also emit less sulfur than temperate S. alterniflora marshes. Few data are available on sulfur gas emissions from freshwater wetlands. In most instances, sulfur emissions from temperate freshwater sites are low. However, some temperate and subtropical freshwater sites are similar in magnitude to those from marine wetlands which do not contain vegetation that produces DMSP. Emissions are low in Alaskan tundra but may be considerably higher in some bogs and fens.

Effects of gas temperature in the plasma layer on RONS generation in array-type dielectric barrier discharge at atmospheric pressure

NASA Astrophysics Data System (ADS)

Yoon, Sung-Young; Yi, Changho; Eom, Sangheum; Park, Seungil; Kim, Seong Bong; Ryu, Seungmin; Yoo, Suk Jae

2017-12-01

In this work, we studied the control of plasma-produced species under a fixed gas composition (i.e., ambient air) in a 10 kHz-driven array-type dielectric barrier atmospheric-pressure plasma discharge. Instead of the gas composition, only the gas velocity was controlled. Thus, the plasma-maintenance cost was considerably lower than methods such as external N2 or O2 injection. The plasma-produced species were monitored using Fourier transformed infrared spectroscopy. The discharge properties were measured using a voltage probe, current probe, infrared camera, and optical emission spectroscopy. The results showed that the major plasma products largely depend on the gas temperature in the plasma discharge layer. The gas temperature in the plasma discharge layer was significantly different to the temperature of the ceramic adjacent to the plasma discharge layer, even in the small discharge power density of ˜15 W/cm2 or ˜100 W/cm3. Because the vibrational excitation of N2 was suppressed by the higher gas flow, the major plasma-produced species shifted from NOx in low flow to O3 in high flow.

The preparation of liposomes using compressed carbon dioxide: strategies, important considerations and comparison with conventional techniques.

PubMed

Bridson, R H; Santos, R C D; Al-Duri, B; McAllister, S M; Robertson, J; Alpar, H O

2006-06-01

Numerous strategies are currently available for preparing liposomes, although no single method is ideal in every respect. Two methods for producing liposomes using compressed carbon dioxide in either its liquid or supercritical state were therefore investigated as possible alternatives to the conventional techniques currently used. The first technique used modified compressed carbon dioxide as a solvent system. The way in which changes in pressure, temperature, apparatus geometry and solvent flow rate affected the size distributions of the formulations was examined. In general, liposomes in the nano-size range with an average diameter of 200 nm could be produced, although some micron-sized vesicles were also present. Liposomes were characterized according to their hydrophobic drug-loading capacity and encapsulated aqueous volumes. The latter were found to be higher than in conventional techniques such as high-pressure homogenization. The second method used compressed carbon dioxide as an anti-solvent to promote uniform precipitation of phospholipids from concentrated ethanolic solutions. Finely divided solvent-free phospholipid powders of saturated lipids could be prepared that were subsequently hydrated to produce liposomes with mean volume diameters of around 5 microm.

Beyond the Electrostatic Ionosphere: Dynamic Coupling of the Magnetosphere and Ionosphere

NASA Astrophysics Data System (ADS)

Lysak, R. L.; Song, Y.

2017-12-01

Many models of magnetospheric dynamics treat the ionosphere as a height-integrated slab in which the electric fields are electrostatic. However, in dynamic situations, the coupling between magnetosphere and ionosphere is achieved by the propagation of shear Alfvén waves. Hall effects lead to a coupling of shear Alfvén and fast mode waves, resulting in an inductive electric field and a compressional component of the magnetic field. It is in fact this compressional magnetic field that is largely responsible for the magnetic fields seen on the ground. A fully inductive ionosphere model is required to describe this situation. The shear Alfvén waves are affected by the strong gradient in the Alfvén speed above the ionosphere, setting up the ionospheric Alfvén resonator with wave periods in the 1-10 second range. These waves develop a parallel electric field on small scales that can produce a broadband acceleration of auroral electrons, which form the Alfvénic aurora. Since these electrons are relatively low in energy (hundreds of eV to a few keV), they produce auroral emissions as well as ionization at higher altitudes. Therefore, they can produce localized columns of ionization that lead to structuring in the auroral currents due to phase mixing or feedback interactions. This implies that the height-integrated description of the ionosphere is not appropriate in these situations. These considerations suggest that the Alfvénic aurora may, at least in some cases, act as a precursor to the development of a quasi-static auroral arc. The acceleration of electrons and ions produces a density cavity at higher altitudes that favors the formation of parallel electric fields. Furthermore, the precipitating electrons will produce secondary and backscattered electrons that provide a necessary population for the formation of double layers. These interactions strongly suggest that the simple electrostatic boundary condition often assumed is inadequate to describe auroral arc formation.

Ligand-functionalized degradable polyplexes formed by cationic poly(aspartic acid)-grafted chitosan-cyclodextrin conjugates

NASA Astrophysics Data System (ADS)

Song, Hai-Qing; Li, Rui-Quan; Duan, Shun; Yu, Bingran; Zhao, Hong; Chen, Da-Fu; Xu, Fu-Jian

2015-03-01

Polypeptide-based degradable polyplexes attracted considerable attention in drug delivery systems. Polysaccharides including cyclodextrin (CD), dextran, and chitosan (CS) were readily grafted with cationic poly(aspartic acid)s (PAsps). To further enhance the transfection performances of PAsp-based polyplexes, herein, different types of ligand (folic acid, FA)-functionalized degradable polyplexes were proposed based on the PAsp-grafted chitosan-cyclodextrin conjugate (CCPE), where multiple β-CDs were tied on a CS chain. The FA-functionalized CCPE (i.e., CCPE-FA) was obtained via a host-guest interaction between the CD units of CCPE and the adamantane (Ad) species of Ad-modified FA (Ad-FA). The resulting CCPE/pDNA, CCPE-FA/pDNA, and ternary CCPE-FA/CCPE/pDNA (prepared by layer-by-layer assembly) polyplexes were investigated in detail using different cell lines. The CCPE-based polyplexes displayed much higher transfection efficiencies than the CS-based polyplexes reported earlier by us. The ternary polyplexes of CCPE-FA/CCPE/pDNA produced excellent gene transfection abilities in the folate receptor (FR)-positive tumor cells. This work would provide a promising means to produce highly efficient polyplexes for future gene therapy applications.Polypeptide-based degradable polyplexes attracted considerable attention in drug delivery systems. Polysaccharides including cyclodextrin (CD), dextran, and chitosan (CS) were readily grafted with cationic poly(aspartic acid)s (PAsps). To further enhance the transfection performances of PAsp-based polyplexes, herein, different types of ligand (folic acid, FA)-functionalized degradable polyplexes were proposed based on the PAsp-grafted chitosan-cyclodextrin conjugate (CCPE), where multiple β-CDs were tied on a CS chain. The FA-functionalized CCPE (i.e., CCPE-FA) was obtained via a host-guest interaction between the CD units of CCPE and the adamantane (Ad) species of Ad-modified FA (Ad-FA). The resulting CCPE/pDNA, CCPE-FA/pDNA, and ternary CCPE-FA/CCPE/pDNA (prepared by layer-by-layer assembly) polyplexes were investigated in detail using different cell lines. The CCPE-based polyplexes displayed much higher transfection efficiencies than the CS-based polyplexes reported earlier by us. The ternary polyplexes of CCPE-FA/CCPE/pDNA produced excellent gene transfection abilities in the folate receptor (FR)-positive tumor cells. This work would provide a promising means to produce highly efficient polyplexes for future gene therapy applications. Electronic supplementary information (ESI) available: 1H NMR assay, synthetic route of Ad-FA, AFM images and cellular internalization rate can be found in ESI. See DOI: 10.1039/c4nr07515c

Disaggregated N2O emission factors in China based on cropping parameters create a robust approach to the IPCC Tier 2 methodology

PubMed Central

Shepherd, Anita; Yan, Xiaoyuan; Nayak, Dali; Newbold, Jamie; Moran, Dominic; Dhanoa, Mewa Singh; Goulding, Keith; Smith, Pete; Cardenas, Laura M.

2015-01-01

China accounts for a third of global nitrogen fertilizer consumption. Under an International Panel on Climate Change (IPCC) Tier 2 assessment, emission factors (EFs) are developed for the major crop types using country-specific data. IPCC advises a separate calculation for the direct nitrous oxide (N2O) emissions of rice cultivation from that of cropland and the consideration of the water regime used for irrigation. In this paper we combine these requirements in two independent analyses, using different data quality acceptance thresholds, to determine the influential parameters on emissions with which to disaggregate and create N2O EFs. Across China, the N2O EF for lowland horticulture was slightly higher (between 0.74% and 1.26% of fertilizer applied) than that for upland crops (values ranging between 0.40% and 1.54%), and significantly higher than for rice (values ranging between 0.29% and 0.66% on temporarily drained soils, and between 0.15% and 0.37% on un-drained soils). Higher EFs for rice were associated with longer periods of drained soil and the use of compound fertilizer; lower emissions were associated with the use of urea or acid soils. Higher EFs for upland crops were associated with clay soil, compound fertilizer or maize crops; lower EFs were associated with sandy soil and the use of urea. Variation in emissions for lowland vegetable crops was closely associated with crop type. The two independent analyses in this study produced consistent disaggregated N2O EFs for rice and mixed crops, showing that the use of influential cropping parameters can produce robust EFs for China. PMID:26865831

Disaggregated N2O emission factors in China based on cropping parameters create a robust approach to the IPCC Tier 2 methodology

NASA Astrophysics Data System (ADS)

Shepherd, Anita; Yan, Xiaoyuan; Nayak, Dali; Newbold, Jamie; Moran, Dominic; Dhanoa, Mewa Singh; Goulding, Keith; Smith, Pete; Cardenas, Laura M.

2015-12-01

China accounts for a third of global nitrogen fertilizer consumption. Under an International Panel on Climate Change (IPCC) Tier 2 assessment, emission factors (EFs) are developed for the major crop types using country-specific data. IPCC advises a separate calculation for the direct nitrous oxide (N2O) emissions of rice cultivation from that of cropland and the consideration of the water regime used for irrigation. In this paper we combine these requirements in two independent analyses, using different data quality acceptance thresholds, to determine the influential parameters on emissions with which to disaggregate and create N2O EFs. Across China, the N2O EF for lowland horticulture was slightly higher (between 0.74% and 1.26% of fertilizer applied) than that for upland crops (values ranging between 0.40% and 1.54%), and significantly higher than for rice (values ranging between 0.29% and 0.66% on temporarily drained soils, and between 0.15% and 0.37% on un-drained soils). Higher EFs for rice were associated with longer periods of drained soil and the use of compound fertilizer; lower emissions were associated with the use of urea or acid soils. Higher EFs for upland crops were associated with clay soil, compound fertilizer or maize crops; lower EFs were associated with sandy soil and the use of urea. Variation in emissions for lowland vegetable crops was closely associated with crop type. The two independent analyses in this study produced consistent disaggregated N2O EFs for rice and mixed crops, showing that the use of influential cropping parameters can produce robust EFs for China.

Words and Pictures as Distinct Encoding Categories in Short-Term Memory

ERIC Educational Resources Information Center

Wells, J. Elisabeth

1973-01-01

Results of this experiment show a considerable release from proactive inhibition with a shift from words to pictures or pictures to words, thus adding one more change to the considerable number of category changes which produce the release phenomenon. (Author/CB)

Ground and excited states of CaSH through electron propagator calculations

NASA Astrophysics Data System (ADS)

Ortiz, J. V.

1990-05-01

Electron propagator calculations of electron affinities of CaSH + produce ground and excited state energies at the optimized, C s minimum of the neutral ground state and at a C ∞v geometry. Feynman-Dyson amplitudes (FDAs) describe the distribution of the least bound electron in various states. The neutral ground state differs from the cation by the occupation of a one-electron state dominated by Ca s functions. Described by FDAs with Ca-S π pseudosymmetry, corresponding excited states have unpaired electrons in orbitals displaying interference between Ca p and d functions. Above these lies a σ pseudosymmetry FDA with principal contributions from Ca d functions. Two FDAs with σ pseudosymmetry follow. Higher excited states exhibit considerable delocalization onto S.

Effect of Reinforcement Architecture on Fracture of Selectively Reinforced Metallic Compact Tension Specimens

NASA Technical Reports Server (NTRS)

Abada, Christopher H.; Farley, Gary L.; Hyer, Michael W.

2006-01-01

A computer-based parametric study of the effect of reinforcement architectures on fracture response of aluminum compact-tension (CT) specimens is performed. Eleven different reinforcement architectures consisting of rectangular and triangular cross-section reinforcements were evaluated. Reinforced specimens produced between 13 and 28 percent higher fracture load than achieved with the non-reinforced case. Reinforcements with blunt leading edges (rectangular reinforcements) exhibited superior performance relative to the triangular reinforcements with sharp leading edges. Relative to the rectangular reinforcements, the most important architectural feature was reinforcement thickness. At failure, the reinforcements carried between 58 and 85 percent of the load applied to the specimen, suggesting that there is considerable load transfer between the base material and the reinforcement.

The association between parental life history and offspring phenotype in Atlantic salmon.

PubMed

Van Leeuwen, Travis E; McLennan, Darryl; McKelvey, Simon; Stewart, David C; Adams, Colin E; Metcalfe, Neil B

2016-02-01

In many taxa there is considerable intraspecific variation in life history strategies from within a single population, reflecting alternative routes through which organisms can achieve successful reproduction. Atlantic salmon Salmo salar (Linnaeus) show some of the greatest within-population variability in life history strategies amongst vertebrates, with multiple discrete male and female life histories co-existing and interbreeding on many spawning grounds, although the effect of the various combinations of life histories on offspring traits remains unknown. Using crosses of wild fish we show here that the life history strategy of both parents was significantly associated with a range of offspring traits. Mothers that had spent longer at sea (2 versus 1 year) produced offspring that were heavier, longer and in better condition at the time of first feeding. However, these relationships disappeared shortly after fry had begun feeding exogenously. At this stage, the juvenile rearing environment (i.e. time spent in fresh water as juveniles) of the mother was a better predictor of offspring traits, with mothers that were faster to develop in fresh water (migrating to sea after two rather than three years of age) producing offspring that had higher maximal metabolic rates, aerobic scopes, and that grew faster. Faster developing fathers (1 year old sneaker males) tended to produce offspring that had higher maximal metabolic rates, were in better body condition and grew faster. The results suggest that both genetic effects and those related to parental early and late life history contribute to offspring traits. © 2016. Published by The Company of Biologists Ltd.

Hennepin County`s experience with heavy-duty ethanol vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-01-01

From November 1993 to October 1996, Hennepin County, which includes Minneapolis, field-tested two heavy-duty snowplow/road maintenance trucks fueled by ethanol. The overall objective of this program was to collect data from original equipment manufacturer alternative fuel heavy-duty trucks, along with comparable data from a similarly configured diesel-powered vehicle, to establish economic, emissions, performance, and durability data for the alternative fuel technology. These ethanol trucks, along with an identical third truck equipped with a diesel engine, were operated year round to maintain the Hennepin county roads. In winter, the trucks were run in 8-hour shifts plowing and hauling snow from urbanmore » and suburban roads. For the rest of the year, the three trucks were used to repair and maintain these same roads. As a result of this project, a considerable amount of data was collected on E95 fuel use, as well as maintenance, repair, emissions, and operational characteristics. Maintenance and repair costs of the E95 trucks were considerably higher primarily due to fuel filter and fuel pump issues. From an emissions standpoint, the E95 trucks emitted less particulate matter and fewer oxides of nitrogen but more carbon monoxide and hydrocarbons. Overall, the E95 trucks operated as well as the diesel, as long as the fuel filters were changed frequently. This project was a success in that E95, a domestically produced fuel from a renewable energy source, was used in a heavy-duty truck application and performed the same rigorous tasks as the diesel counterparts. The drawbacks to E95 as a heavy-duty fuel take the form of higher operational costs, higher fuel costs, shorter range, and the lack of over-the-road infrastructure.« less

Decision Making for Chinese Students to Receive Their Higher Education in the U.S.

ERIC Educational Resources Information Center

Chao, Chiangnan

2016-01-01

This study examines Chinese students' decision making considerations for coming to the U.S. for their higher education. Due to the large number of Chinese students in the U.S, it is an interesting topic for educators and researchers to explore the decision making considerations Chinese students choose for studying abroad. International student…

Symbiotic fungal associations in 'lower' land plants.

PubMed Central

Read, D J; Ducket, J G; Francis, R; Ligron, R; Russell, A

2000-01-01

An analysis of the current state of knowledge of symbiotic fungal associations in 'lower' plants is provided. Three fungal phyla, the Zygomycota, Ascomycota and Basidiomycota, are involved in forming these associations, each producing a distinctive suite of structural features in well-defined groups of 'lower' plants. Among the 'lower' plants only mosses and Equisetum appear to lack one or other of these types of association. The salient features of the symbioses produced by each fungal group are described and the relationships between these associations and those formed by the same or related fungi in 'higher' plants are discussed. Particular consideration is given to the question of the extent to which root fungus associations in 'lower' plants are analogous to 'mycorrhizas' of 'higher' plants and the need for analysis of the functional attributes of these symbioses is stressed. Zygomycetous fungi colonize a wide range of extant lower land plants (hornworts, many hepatics, lycopods, Ophioglossales, Psilotales and Gleicheniaceae), where they often produce structures analogous to those seen in the vesicular-arbuscular (VA) mycorrhizas of higher plants, which are formed by members of the order Glomales. A preponderance of associations of this kind is in accordance with palaeohbotanical and molecular evidence indicating that glomalean fungi produced the archetypal symbioses with the first plants to emerge on to land. It is shown, probably for the first time, that glomalean fungi forming typical VA mycorrhiza with a higher plant (Plantago lanceolata) can colonize a thalloid liverwort (Pellia epiphylla), producing arbuscules and vesicles in the hepatic. The extent to which these associations, which are structurally analogous to mycorrhizas, have similar functions remains to be evaluated. Ascomycetous associations are found in a relatively small number of families of leafy liverworts. The structural features of the fungal colonization of rhizoids and underground axes of these plants are similar to those seen in mycorrhizal associations of ericaceous plants like Vaccinium. Cross inoculation experiments have confirmed that a typical mycorrhizal endophyte of ericaceous plants, Hymenoscyphus ericae, will form associations in liverworts which are structurally identical to those seen in nature. Again, the functional significance of these associations remains to be examined. Some members of the Jungermanniales and Metzgeriales form associations with basidiomycetous fungi. These produce intracellular coils of hyphae, which are similar to the pelotons seen in orchid mycorrhizas, which also involve basidiomycetes. The fungal associates of the autotrophic Aneura and of its heterotrophic relative Cryptothallus mirabilis have been isolated. In the latter case it has been shown that the fungal symbiont is an ectomycorrhizal associate of Betula, suggesting that the apparently obligate nature of the association between the hepatic and Betula in nature is based upon requirement for this particular heterotroph. PMID:10905611

Symbiotic fungal associations in 'lower' land plants.

PubMed

Read, D J; Ducket, J G; Francis, R; Ligron, R; Russell, A

2000-06-29

An analysis of the current state of knowledge of symbiotic fungal associations in 'lower' plants is provided. Three fungal phyla, the Zygomycota, Ascomycota and Basidiomycota, are involved in forming these associations, each producing a distinctive suite of structural features in well-defined groups of 'lower' plants. Among the 'lower' plants only mosses and Equisetum appear to lack one or other of these types of association. The salient features of the symbioses produced by each fungal group are described and the relationships between these associations and those formed by the same or related fungi in 'higher' plants are discussed. Particular consideration is given to the question of the extent to which root fungus associations in 'lower' plants are analogous to 'mycorrhizas' of 'higher' plants and the need for analysis of the functional attributes of these symbioses is stressed. Zygomycetous fungi colonize a wide range of extant lower land plants (hornworts, many hepatics, lycopods, Ophioglossales, Psilotales and Gleicheniaceae), where they often produce structures analogous to those seen in the vesicular-arbuscular (VA) mycorrhizas of higher plants, which are formed by members of the order Glomales. A preponderance of associations of this kind is in accordance with palaeohbotanical and molecular evidence indicating that glomalean fungi produced the archetypal symbioses with the first plants to emerge on to land. It is shown, probably for the first time, that glomalean fungi forming typical VA mycorrhiza with a higher plant (Plantago lanceolata) can colonize a thalloid liverwort (Pellia epiphylla), producing arbuscules and vesicles in the hepatic. The extent to which these associations, which are structurally analogous to mycorrhizas, have similar functions remains to be evaluated. Ascomycetous associations are found in a relatively small number of families of leafy liverworts. The structural features of the fungal colonization of rhizoids and underground axes of these plants are similar to those seen in mycorrhizal associations of ericaceous plants like Vaccinium. Cross inoculation experiments have confirmed that a typical mycorrhizal endophyte of ericaceous plants, Hymenoscyphus ericae, will form associations in liverworts which are structurally identical to those seen in nature. Again, the functional significance of these associations remains to be examined. Some members of the Jungermanniales and Metzgeriales form associations with basidiomycetous fungi. These produce intracellular coils of hyphae, which are similar to the pelotons seen in orchid mycorrhizas, which also involve basidiomycetes. The fungal associates of the autotrophic Aneura and of its heterotrophic relative Cryptothallus mirabilis have been isolated. In the latter case it has been shown that the fungal symbiont is an ectomycorrhizal associate of Betula, suggesting that the apparently obligate nature of the association between the hepatic and Betula in nature is based upon requirement for this particular heterotroph.

Carbon footprint assessment of Western Australian Groundwater Recycling Scheme

NASA Astrophysics Data System (ADS)

Simms, Andrew; Hamilton, Stacey; Biswas, Wahidul K.

2017-04-01

This research has determined the carbon footprint or the carbon dioxide equivalent (CO2 eq) of potable water production from a groundwater recycling scheme, consisting of the Beenyup wastewater treatment plant, the Beenyup groundwater replenishment trial plant and the Wanneroo groundwater treatment plant in Western Australia, using a life cycle assessment approach. It was found that the scheme produces 1300 tonnes of CO2 eq per gigalitre (GL) of water produced, which is 933 tonnes of CO2 eq higher than the desalination plant at Binningup in Western Australia powered by 100% renewable energy generated electricity. A Monte Carlo Simulation uncertainty analysis calculated a Coefficient of Variation value of 5.4%, thus confirming the accuracy of the simulation. Electricity input accounts for 83% of the carbon dioxide equivalent produced during the production of potable water. The chosen mitigation strategy was to consider the use of renewable energy to generate electricity for carbon intensive groundwater replenishment trial plant. Depending on the local situation, a maximum of 93% and a minimum of 21% greenhouse gas saving from electricity use can be attained at groundwater replenishment trial plant by replacing grid electricity with renewable electricity. In addition, the consideration of vibrational separation (V-Sep) that helps reduce wastes generation and chemical use resulted in a 4.03 tonne of CO2 eq saving per GL of water produced by the plant.

Thermophilic Fungi to Dominate Aflatoxigenic/Mycotoxigenic Fungi on Food under Global Warming

PubMed Central

Paterson, Robert Russell M.; Lima, Nelson

2017-01-01

Certain filamentous fungi produce mycotoxins that contaminate food. Mycotoxin contamination of crops is highly influenced by environmental conditions and is already affected by global warming, where there is a succession of mycotoxigenic fungi towards those that have higher optimal growth temperatures. Aflatoxigenic fungi are at the highest limit of temperature although predicted increases in temperature are beyond that constraint. The present paper discusses what will succeed these fungi and represents the first such consideration. Aflatoxins are the most important mycotoxins and are common in tropical produce, much of which is exported to temperate regions. Hot countries may produce safer food under climate change because aflatoxigenic fungi will be inhibited. The same situation will occur in previously temperate regions where these fungi have recently appeared, although decades later. Existing thermotolerant and thermophilic fungi (TTF) will dominate, in contrast to the conventional mycotoxigenic fungi adapting or mutating, as it will be quicker. TTF produce a range of secondary metabolites, or potential mycotoxins and patulin which may become a new threat. In addition, Aspergillus fumigatus will appear more frequently, a serious human pathogen, because it is (a) thermotolerant and (b) present on crops: hence this is an even greater problem. An incubation temperature of 41 °C needs employing forthwith to detect TTF. Finally, TTF in crops requires study because of the potential for diseases in humans and animals under climate change. PMID:28218685

Thermophilic Fungi to Dominate Aflatoxigenic/Mycotoxigenic Fungi on Food under Global Warming.

PubMed

Paterson, Robert Russell M; Lima, Nelson

2017-02-17

Certain filamentous fungi produce mycotoxins that contaminate food. Mycotoxin contamination of crops is highly influenced by environmental conditions and is already affected by global warming, where there is a succession of mycotoxigenic fungi towards those that have higher optimal growth temperatures. Aflatoxigenic fungi are at the highest limit of temperature although predicted increases in temperature are beyond that constraint. The present paper discusses what will succeed these fungi and represents the first such consideration. Aflatoxins are the most important mycotoxins and are common in tropical produce, much of which is exported to temperate regions. Hot countries may produce safer food under climate change because aflatoxigenic fungi will be inhibited. The same situation will occur in previously temperate regions where these fungi have recently appeared, although decades later. Existing thermotolerant and thermophilic fungi (TTF) will dominate, in contrast to the conventional mycotoxigenic fungi adapting or mutating, as it will be quicker. TTF produce a range of secondary metabolites, or potential mycotoxins and patulin which may become a new threat. In addition, Aspergillus fumigatus will appear more frequently, a serious human pathogen, because it is (a) thermotolerant and (b) present on crops: hence this is an even greater problem. An incubation temperature of 41 °C needs employing forthwith to detect TTF. Finally, TTF in crops requires study because of the potential for diseases in humans and animals under climate change.

Carbon footprint assessment of Western Australian Groundwater Recycling Scheme.

PubMed

Simms, Andrew; Hamilton, Stacey; Biswas, Wahidul K

2017-04-01

This research has determined the carbon footprint or the carbon dioxide equivalent (CO 2 eq) of potable water production from a groundwater recycling scheme, consisting of the Beenyup wastewater treatment plant, the Beenyup groundwater replenishment trial plant and the Wanneroo groundwater treatment plant in Western Australia, using a life cycle assessment approach. It was found that the scheme produces 1300 tonnes of CO 2 eq per gigalitre (GL) of water produced, which is 933 tonnes of CO 2 eq higher than the desalination plant at Binningup in Western Australia powered by 100% renewable energy generated electricity. A Monte Carlo Simulation uncertainty analysis calculated a Coefficient of Variation value of 5.4%, thus confirming the accuracy of the simulation. Electricity input accounts for 83% of the carbon dioxide equivalent produced during the production of potable water. The chosen mitigation strategy was to consider the use of renewable energy to generate electricity for carbon intensive groundwater replenishment trial plant. Depending on the local situation, a maximum of 93% and a minimum of 21% greenhouse gas saving from electricity use can be attained at groundwater replenishment trial plant by replacing grid electricity with renewable electricity. In addition, the consideration of vibrational separation (V-Sep) that helps reduce wastes generation and chemical use resulted in a 4.03 tonne of CO 2 eq saving per GL of water produced by the plant.

An Indian scenario on renewable and sustainable energy sources with emphasis on algae.

PubMed

Hemaiswarya, S; Raja, Rathinam; Carvalho, Isabel S; Ravikumar, R; Zambare, Vasudeo; Barh, Debmalya

2012-12-01

India is the fifth largest primary energy consumer and fourth largest petroleum consumer after USA, China, and Japan. Despite the global economic crisis, India's economy is expected to grow at 6 to 8 %/year. There is an extreme dependence on petroleum products with considerable risks and environmental issues. Petroleum-derived transport fuels are of limited availability and contribute to global warming, making renewable biofuel as the best alternative. The focus on biogas and biomass-based energy, such as bioethanol and biohydrogen, will enhance cost-effectiveness and provide an opportunity for the rural community. Among all energy sources, microalgae have received, so far, more attention due to their facile adaptability to grow in the photobioreactors or open ponds, high yields, and multiple applications. Microalgae can produce a substantial amount of triacylglycerols as a storage lipid under photooxidative stress or other adverse environmental conditions. In addition to renewable biofuels, they can provide different types of high-value bioproducts added to their advantages, such as higher photosynthetic efficiency, higher biomass production, and faster growth compared to any other energy crops. The viability of first-generation biofuels production is, however, questionable because of the conflict with food supply. In the future, biofuels should ideally create the environmental, economic, and social benefits to the communities and reflect energy efficiency so as to plan a road map for the industry to produce third-generation biofuels.

Optimization of alginate alkaline extraction technology from Sargassum polycystum and its antioxidant properties

NASA Astrophysics Data System (ADS)

Yudiati, E.; Santosa, G. W.; Tontowi, M. R.; Sedjati, S.; Supriyantini, E.; Khakimah, M.

2018-03-01

The quality of alginate may differ considerably depending on several aspects. The aims of this research were to identify, characterize the alginate, examine the quality and determine the antioxidant properties. Identification was done phenotypically. Characterization was done by FT-IR spectroscopy by comparing the samples to standard alginate (Sigma, USA). The extraction was done in two treatments: soaked with 5 % NaOCl, extraction of Na2CO3 (3.0; 5.0; 7.0 and 9.0 %)/EDTA, KCl and precipitated with ethanol (T1) and dried. T2 was pretreated with KOH, HCl, boiled by Na2CO3 (3.0; 5.0; 7.0 and 9.0 %), depigmented, HCl and NaOH addition precipitated with ethanol absolute and then sundried. Antioxidant properties test were done by DPPH and NBT radical scavenging assays. Phenotypic identification showed that the species was Sargassum polycystum. There were similarities in signal vibration between the samples and the standard. The highest yield was produced from 7.0 % Na2CO3, while the average yield of T1 (37.56 %) was significantly higher (P ≤ 0.05) than T2 (21.77 %). The level of dynamic viscosity was correlated with alkali concentration. Indication in T1 results showed that the higher alkali concentration, the better yield. The best yield was the lowest viscosity, produced the strongest antioxidant activity.

Comparing different stimulus configurations for population receptive field mapping in human fMRI

PubMed Central

Alvarez, Ivan; de Haas, Benjamin; Clark, Chris A.; Rees, Geraint; Schwarzkopf, D. Samuel

2015-01-01

Population receptive field (pRF) mapping is a widely used approach to measuring aggregate human visual receptive field properties by recording non-invasive signals using functional MRI. Despite growing interest, no study to date has systematically investigated the effects of different stimulus configurations on pRF estimates from human visual cortex. Here we compared the effects of three different stimulus configurations on a model-based approach to pRF estimation: size-invariant bars and eccentricity-scaled bars defined in Cartesian coordinates and traveling along the cardinal axes, and a novel simultaneous “wedge and ring” stimulus defined in polar coordinates, systematically covering polar and eccentricity axes. We found that the presence or absence of eccentricity scaling had a significant effect on goodness of fit and pRF size estimates. Further, variability in pRF size estimates was directly influenced by stimulus configuration, particularly for higher visual areas including V5/MT+. Finally, we compared eccentricity estimation between phase-encoded and model-based pRF approaches. We observed a tendency for more peripheral eccentricity estimates using phase-encoded methods, independent of stimulus size. We conclude that both eccentricity scaling and polar rather than Cartesian stimulus configuration are important considerations for optimal experimental design in pRF mapping. While all stimulus configurations produce adequate estimates, simultaneous wedge and ring stimulation produced higher fit reliability, with a significant advantage in reduced acquisition time. PMID:25750620

From "Financial Considerations" to "Poverty": Towards a Reconceptualisation of the Role of Finances in Higher Education Student Drop Out

ERIC Educational Resources Information Center

Breier, Mignonne

2010-01-01

While the role of financial considerations in higher education student dropout is being recognized increasingly, the dominant international literature fails to reflect the extent of socio-economic deprivation among students in countries where many people live below the poverty datum line. This article draws on a study of student retention and…

New High-Temperature Membranes Developed for Proton Exchange Membrane Fuel Cells

NASA Technical Reports Server (NTRS)

Kinder, James D.

2004-01-01

Fuel cells are receiving a considerable amount of attention for potential use in a variety of areas, including the automotive industry, commercial power generation, and personal electronics. Research at the NASA Glenn Research Center has focused on the development of fuel cells for use in aerospace power systems for aircraft, unmanned air vehicles, and space transportation systems. These applications require fuel cells with higher power densities and better durability than what is required for nonaerospace uses. In addition, membrane cost is a concern for any fuel cell application. The most widely used membrane materials for proton exchange membrane (PEM) fuel cells are based on sulfonated perfluorinated polyethers, typically Nafion 117, Flemion, or Aciplex. However, these polymers are costly and do not function well at temperatures above 80 C. At higher temperatures, conventional membrane materials dry out and lose their ability to conduct protons, essential for the operation of the fuel cell. Increasing the operating temperature of PEM fuel cells from 80 to 120 C would significantly increase their power densities and enhance their durability by reducing the susceptibility of the electrode catalysts to carbon monoxide poisoning. Glenn's Polymers Branch has focused on developing new, low-cost membranes that can operate at these higher temperatures. A new series of organically modified siloxane (ORMOSIL) polymers were synthesized for use as membrane materials in a high-temperature PEM fuel cell. These polymers have an organic portion that can allow protons to transport through the polymer film and a cross-linked silica network that gives the polymers dimensional stability. These flexible xerogel polymer films are thermally stable, with decomposition onset as high as 380 C. Two types of proton-conducting ORMOSIL films have been produced: (1) NASA-A, which can coordinate many highly acid inorganic salts that facilitate proton conduction and (2) NASA-B, which has been produced and which incorporates strongly acidic (proton donating) functional groups into the polymer backbone. Both of these polymer films have demonstrated significantly higher proton conductivity than Nafion at elevated temperatures and low relative humidities. An added advantage is that these polymers are very inexpensive to produce because their starting materials are commodity chemicals that are commercially available in large volumes.

Chlorophyll and carbohydrate metabolism in developing silique and seed are prerequisite to seed oil content of Brassica napus L.

PubMed

Hua, Shuijin; Chen, Zhong-Hua; Zhang, Yaofeng; Yu, Huasheng; Lin, Baogang; Zhang, Dongqing

2014-12-01

Although the seed oil content in canola is a crucial quality determining trait, the regulatory mechanisms of its formation are not fully discovered. This study compared the silique and seed physiological characteristics including fresh and dry weight, seed oil content, chlorophyll content, and carbohydrate content in a high oil content line (HOCL) and a low oil content line (LOCL) of canola derived from a recombinant inbred line in 2010, 2011, and 2012. The aim of the investigation is to uncover the physiological regulation of silique and seed developmental events on seed oil content in canola. On average, 83% and 86% of silique matter while 69% and 63% of seed matter was produced before 30 days after anthesis (DAA) in HOCL and LOCL, respectively, over three years. Furthermore, HOCL exhibited significantly higher fresh and dry matter at most developmental stages of siliques and seeds. From 20 DAA, lipids were deposited in the seed of HOCL significantly faster than that of LOCL, which was validated by transmission electron microscopy, showing that HOCL accumulates considerable more oil bodies in the seed cells. Markedly higher silique chlorophyll content was observed in HOCL consistently over the three consecutive years, implying a higher potential of photosynthetic capacity in siliques of HOCL. As a consequence, HOCL exhibited significantly higher content of fructose, glucose, sucrose, and starch mainly at 20 to 45 DAA, a key stage of seed lipid deposition. Moreover, seed sugar content was usually higher than silique indicating the importance of sugar transportation from siliques to seeds as substrate for lipid biosynthesis. The much lower silique cellulose content in HOCL was beneficial for lipid synthesis rather than consuming excessive carbohydrate for cell wall. Superior physiological characteristics of siliques in HOCL showed advantage to produce more photosynthetic assimilates, which were highly correlated to seed oil contents.

Economic impacts of federal policy responses to drought in the Rio Grande Basin

NASA Astrophysics Data System (ADS)

Ward, Frank A.; Hurd, Brian H.; Rahmani, Tarik; Gollehon, Noel

2006-03-01

Significant growth in the Rio Grande Basin's demand for water has stressed the region's scarce water supply. This paper presents an analysis of the impacts of severe and sustained drought and of minimum in-stream flow requirements to support endangered species in the Rio Grande watershed. These impacts are investigated by modeling the physical and institutional constraints within the Rio Grande Basin and by identifying the hydrologic and economic responses of all major water users. Water supplies, which include all major tributaries, interbasin transfers, and hydrologically connected groundwater, are represented in a yearly time step. A nonlinear programming model is developed to maximize economic benefits subject to hydrologic and institutional constraints. Results indicate that drought produces considerable impacts on both agriculture and municipal and industrial (MI) uses in the Rio Grande watershed. In-stream flow requirements to support endangered species' habitat produce the largest impacts on agricultural water users in New Mexico and Texas. Hydrologic and economic impacts are more pronounced when in-stream flow requirements dictate larger quantities of water for endangered species' habitat. Higher in-stream flow requirements for endangered species in central New Mexico cause considerable losses to New Mexico agriculture above Elephant Butte Reservoir and to MI users in Albuquerque, New Mexico. Those same in-stream flow requirements reduce drought damages to New Mexico agriculture below Elephant Butte Reservoir and reduce the severity of drought damages to MI users in El Paso, Texas. Results provide a framework for formulating federal policy responses to drought in the Rio Grande Basin.

Case study on combined CO₂ sequestration and low-salinity water production potential in a shallow saline aquifer in Qatar.

PubMed

Ahmed, Tausif Khizar; Nasrabadi, Hadi

2012-10-30

CO₂ is one of the byproducts of natural gas production in Qatar. The high rate of natural gas production from Qatar's North Field (world's largest non-associated gas field) has led to the production of significant amounts of CO₂. The release of CO₂ into the atmosphere may be harmful from the perspective of global warming. In this work, we study the CO₂ sequestration potential in Qatar's Aruma aquifer. The Aruma aquifer is a saline aquifer in the southwest of Qatar. It occupies an area of approximately 1985 km₂ on land (16% of Qatar's total area). We have developed a compositional model for CO₂ sequestration in the Aruma aquifer on the basis of available log and flow test data. We suggest water production at some distance from the CO₂ injection wells as a possible way to control the pore pressure. This method increases the potential for safe sequestration of CO₂ in the aquifer without losing integrity of the caprock and without any CO₂ leakage. The water produced from this aquifer is considerably less saline than seawater and could be a good water source for the desalination process, which is currently the main source of water in Qatar. The outcome of the desalination process is water with higher salinity than the seawater that is currently discharged into the sea. This discharge can have negative long-term environmental effects. The water produced from the Aruma aquifer is considerably less saline than seawater and can be a partial solution to this problem. Copyright © 2012 Elsevier Ltd. All rights reserved.

DC response of dust to low frequency AC signals

NASA Astrophysics Data System (ADS)

McKinlay, Michael; Konopka, Uwe; Thomas, Edward

2017-10-01

Macroscopic changes in the shape and equilibrium position of clouds of charged microparticles suspended in a plasma have been observed in response to low frequency AC signals. In these experiments, dusty plasmas consisting of 2-micron diameter silica microspheres suspended between an anode and cathode in an argon, DC glow discharge plasma are produced in a grounded, 6-way cross vacuum chamber. An AC signal, produced by a function generator and amplified by a bipolar op-amp, is superimposed onto the potential from the cathode. The frequencies of the applied AC signals, ranging from tens to hundreds of kHz, are comparable to the ion-neutral collision frequency; well below the ion/electron plasma frequencies, but also considerably higher than the dust plasma frequency. This presentation will detail the experimental setup, present documentation and categorization of observations of the dust response, and present an initial model of the response. This work is supported by funding from the US Dept. of Energy, Grant Number DE-SC0016330, and by the National Science Foundation, Grant Number PHY-1613087.

Infrared spectra of M-η2-C2H2 and HMsbnd CCH produced in reactions of laser-ablated Fe and Os atoms with acetylene

NASA Astrophysics Data System (ADS)

Cho, Han-Gook; Andrews, Lester

2015-04-01

The π- and Csbnd H insertion products (M-η2-C2H2 and HMsbnd CCH) are identified in the matrix infrared spectra from reactions of laser-ablated Fe and Os atoms with acetylene isotopomers, but the vinylidene product (H2CCM) is not, in contrast to the recently studied Ru case. The π-complex is produced in deposition and annealing, and it converts to the insertion complex during photolysis. While the vinylidene product is energetically comparable with the two primary products, the energy barrier is considerably higher in contrast to the Ru case. The relatively short Csbnd C bonds of the π-complexes indicate weak back-donations from the group 8 metals to the acetylene π∗ orbitals. The highly bent structure of HOssbnd CCH evidently originates from the high d contributions to the Csbnd Os and Ossbnd H bonds. The C2v structures of the vinylidene products arise from the p-d π bonding between C and M.

YCL047C/POF1 Is a Novel Nicotinamide Mononucleotide Adenylyltransferase (NMNAT) in Saccharomyces cerevisiae*

PubMed Central

Kato, Michiko; Lin, Su-Ju

2014-01-01

NAD+ is an essential metabolic cofactor involved in various cellular biochemical processes. Nicotinamide riboside (NR) is an endogenously produced key pyridine metabolite that plays important roles in the maintenance of NAD+ pool. Using a NR-specific cell-based screen, we identified mutants that exhibit altered NR release phenotype. Yeast cells lacking the ORF YCL047C/POF1 release considerably more NR compared with wild type, suggesting that POF1 plays an important role in NR/NAD+ metabolism. The amino acid sequence of Pof1 indicates that it is a putative nicotinamide mononucleotide adenylyltransferase (NMNAT). Unlike other yeast NMNATs, Pof1 exhibits NMN-specific adenylyltransferase activity. Deletion of POF1 significantly lowers NAD+ levels and decreases the efficiency of NR utilization, resistance to oxidative stress, and NR-induced life span extension. We also show that NR is constantly produced by multiple nucleotidases and that the intracellular NR pools are likely to be compartmentalized, which contributes to the regulation of NAD+ homeostasis. Our findings may contribute to the understanding of the molecular basis and regulation of NAD+ metabolism in higher eukaryotes. PMID:24759102

Plant-associated methylobacteria as co-evolved phytosymbionts: a hypothesis.

PubMed

Kutschera, Ulrich

2007-03-01

Due to their wall-associated pectin metabolism, growing plant cells emit significant amounts of the one-carbon alcohol methanol. Pink-pigmented microbes of the genus Methylobacterium that colonize the surfaces of leaves (epiphytes) are capable of growth on this volatile C1-compound as sole source of carbon and energy. In this article the results of experiments with germ-free (gnotobiotic) sporophytes of angiosperms (sunflower, maize) and gametophytes of bryophytes (a moss and two liverwort species) are summarized. The data show that methylobacteria do not stimulate the growth of these angiosperms, but organ development in moss protonemata and in thalli of liverworts is considerably enhanced. Since methylobacteria produce and secrete cytokinins and auxin, a model of plant-microbe-interaction (symbiosis) is proposed in which the methanol-consuming bacteria are viewed as coevolved partners of the gametophyte that determine its growth, survival and reproduction (fitness). This symbiosis is restricted to the haploid cells of moisture-dependent "living fossil" plants; it does not apply to the diploid sporophytes of higher embryophytes, which are fully adapted to life on land and apparently produce sufficient amounts of endogenous phytohormones.

Plant-Associated Methylobacteria as Co-Evolved Phytosymbionts

PubMed Central

2007-01-01

Due to their wall-associated pectin metabolism, growing plant cells emit significant amounts of the one-carbon alcohol methanol. Pink-pigmented microbes of the genus Methylobacterium that colonize the surfaces of leaves (epiphytes) are capable of growth on this volatile C1-compound as sole source of carbon and energy. In this article the results of experiments with germ-free (gnotobiotic) sporophytes of angiosperms (sunflower, maize) and gametophytes of bryophytes (a moss and two liverwort species) are summarized. The data show that methylobacteria do not stimulate the growth of these angiosperms, but organ development in moss protonemata and in thalli of liverworts is considerably enhanced. Since methylobacteria produce and secrete cytokinins and auxin, a model of plant-microbe-interaction (symbiosis) is proposed in which the methanol-consuming bacteria are viewed as coevolved partners of the gametophyte that determine its growth, survival and reproduction (fitness). This symbiosis is restricted to the haploid cells of moisture-dependent “living fossil” plants; it does not apply to the diploid sporophytes of higher embryophytes, which are fully adapted to life on land and apparently produce sufficient amounts of endogenous phytohormones. PMID:19516971

Volatile sulfur compounds produced by probiotic bacteria in the presence of cysteine or methionine.

PubMed

Sreekumar, R; Al-Attabi, Z; Deeth, H C; Turner, M S

2009-06-01

To investigate the abilities of various probiotic bacteria to produce volatile sulfur compounds (VSCs) relevant to food flavour and aroma. Probiotic strains (Lactobacillus acidophilus NCFM, Lactobacillus plantarum 299v, Lactobacillus rhamnosus GG, Lactobacillus reuteri ATCC55730 and L. reuteri BR11), Lactobacillus delbrueckii ATCC4797, L. plantarum ATCC14917 and Lactococcus lactis MG1363 were incubated with either cysteine or methionine. Volatile compounds were captured, identified and quantified using a sensitive solid-phase microextraction (SPME) technique combined with gas chromatography coupled to a pulsed flame photometric detector (SPME/GC/PFPD). Several VSCs were identified including H(2)S, methanethiol, dimethyldisulfide and dimethyltrisulfide. The VSC profiles varied substantially for different strains of L. plantarum and L. reuteri and it was found that L. reuteri ATCC55730 and L. lactis MG1363 produced the lowest levels of VSCs (P < 0.05). Levels of VSCs generated by bacteria were found to be equivalent to, or higher than, that found in commercial cheeses. Several probiotic strains are able to generate considerable levels of VSCs and substantial variations in VSC generating potential exists between different strains from the same species. This study demonstrates that probiotic bacteria are able to efficiently generate important flavour and aroma compounds and therefore has implications for the development of probiotic containing foods.

Calibration of UAS imagery inside and outside of shadows for improved vegetation index computation

NASA Astrophysics Data System (ADS)

Bondi, Elizabeth; Salvaggio, Carl; Montanaro, Matthew; Gerace, Aaron D.

2016-05-01

Vegetation health and vigor can be assessed with data from multi- and hyperspectral airborne and satellite- borne sensors using index products such as the normalized difference vegetation index (NDVI). Recent advances in unmanned aerial systems (UAS) technology have created the opportunity to access these same image data sets in a more cost effective manner with higher temporal and spatial resolution. Another advantage of these systems includes the ability to gather data in almost any weather condition, including complete cloud cover, when data has not been available before from traditional platforms. The ability to collect in these varied conditions, meteorological and temporal, will present researchers and producers with many new challenges. Particularly, cloud shadows and self-shadowing by vegetation must be taken into consideration in imagery collected from UAS platforms to avoid variation in NDVI due to changes in illumination within a single scene, and between collection flights. A workflow is presented to compensate for variations in vegetation indices due to shadows and variation in illumination levels in high resolution imagery collected from UAS platforms. Other calibration methods that producers may currently be utilizing produce NDVI products that still contain shadow boundaries and variations due to illumination, whereas the final NDVI mosaic from this workflow does not.

Enhanced performance of flexible dye-sensitized solar cells using flexible Ag@ZrO2/C nanofiber film as low-cost counter electrode

NASA Astrophysics Data System (ADS)

Yin, Xin; Xie, Xueyao; Song, Lixin; Zhai, Jifeng; Du, Pingfan; Xiong, Jie

2018-05-01

Highly flexible ZrO2/C nanofibers (NFs) coated with Ag nanoparticles (NPs) have been fabricated by a combination of electrospinning, carbonization and hydrothermal treatment. The obtained Ag@ZrO2/C NFs serve as low-cost counter electrodes (CEs) for flexible dye-sensitized solar cells (FDSSCs). A considerable power conversion efficiency of 4.77% is achieved, which is 27.9% higher than the η of ZrO2/C NFs CEs (3.73%) and reaches about 90% of that of Pt CE (5.26%). It can be ascribed to the fact that the introduction of Ag NPs provides a large number of accessible reaction sites for electrolyte ions to rapidly participate in the I3-/I- reaction. Moreover, the Ag NPs can produce synergistic effect with ZrO2/C NFs to further enhance transport capacity and electro-catalytic activity of the Ag@ZrO2/C film. Therefore, the considerable performance together with characteristics of simple preparation, low cost and flexibility suggests the Ag@ZrO2/C film can be promising candidate for the future generation of FDSSC.

Comparison of metallurgical coke and lignite coke for power generation in Thailand

NASA Astrophysics Data System (ADS)

Ratanakuakangwan, Sudlop; Tangjitsitcharoen, Somkiat

2017-04-01

This paper presents and compares two alternatives of cokes in power generation which are the metallurgical coke with coke oven gas and the coke from lignite under the consideration of the energy and the environment. These alternatives not only consume less fuel due to their higher heat content than conventional coal but also has less SO2 emission. The metallurgical coke and its by-product which is coke oven gas can be obtained from the carbonization process of coking coal. According to high grade coking coal, the result in the energy attitude is not profitable but its sulfur content that directly affects the emission of SO2 is considered to be very low. On the other hand, the coke produced from lignite is known as it is the lowest grade from coal and it causes the high pollution. Regarding to energy profitability, the lignite coke is considered to be much more beneficial than the metallurgical coke in contrast to the environmental concerns. However, the metallurgical coke has the highest heating value. Therefore, a decision making between those choices must be referred to the surrounding circumstances based on energy and environment as well as economic consideration in the further research.

Antenna induced range smearing in MST radars

NASA Technical Reports Server (NTRS)

Watkins, B. J.; Johnston, P. E.

1984-01-01

There is considerable interest in developing stratosphere troposphere (ST) and mesosphere stratosphere troposphere (MST) radars for higher resolution to study small-scale turbulent structures and waves. At present most ST and MST radars have resolutions of 150 meters or larger, and are not able to distinguish the thin (40 - 100 m) turbulent layers that are known to occur in the troposphere and stratosphere, and possibly in the mesosphere. However the antenna beam width and sidelobe level become important considerations for radars with superior height resolution. The objective of this paper is to point out that for radars with range resolutions of about 150 meters or less, there may be significant range smearing of the signals from mesospheric altitudes due to the finite beam width of the radar antenna. At both stratospheric and mesospheric heights the antenna sidelobe level for lear equally spaced phased arrays may also produce range aliased signals. To illustrate this effect the range smearing functions for two vertically directed antennas have been calculated, (1) an array of 32 coaxial-collinear strings each with 48 elements that simulates the vertical beam of the Poker Flat, Glaska, MST radar; and (2) a similar, but smaller, array of 16 coaxial-collinear strings each with 24 elements.

The songs of Tlaloc: Interference of ten ceramical duct flutes, Offering 89 of the Aztec Templo Mayor

NASA Astrophysics Data System (ADS)

Both, M. A. Adje

2002-11-01

Among the many preserved sound artefacts deposited in the offerings of the Aztec Templo Mayor are a set of ten tubular duct flutes made from clay, dating Late Postclassic Mesoamerica, 1350-1521 AD. The aerophones are completely painted in blue, and characterized by: (1) a short mouthpiece; (2) a framed aperture; (3) a tube with four fingerholes; and (4) an applicated mask with features of the Aztec rain god Tlaloc, basically three rings and a standardized relief structure of two clouds. While all measurements follow the same pattern, one particular organological distinction was made, as five flutes show an exit hole in the middle ring of the mask and five flutes are stopped. Thus, five instruments sound considerably higher, apart from the minimal pitch deviation of each specimen. Both the tonal capacity of each flute and the acoustics of several flutes played simultaneously were recorded and measured. A series of remarkable interference effects could be produced, which were strongly related to the ritual complex reflected in the offering. Taking in consideration the Aztec concept of music, it could be supposed that they were perceived as a principle of the song, or proper voice of Tlaloc.

Degradation of the chlorophenoxyacetic herbicide 2,4-D by plasma-ozonation system.

PubMed

Bradu, C; Magureanu, M; Parvulescu, V I

2017-08-15

A novel advanced oxidation process based on the combination of ozonation with non-thermal plasma generated in a pulsed corona discharge was developed for the oxidative degradation of recalcitrant organic pollutants in water. The pulsed corona discharge in contact with liquid, operated in oxygen, produced 3.5mgL -1 ozone, which was subsequently introduced in the ozonation reactor. The solution to be treated was continuously circulated between the plasma reactor and the ozonation reactor. The system was tested for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) and considerably improved performance as compared to ozonation alone, both with respect to the removal of the target compound and to mineralization. The apparent reaction rate constant for 2,4-D removal was 0.195min -1 , more than two times higher than the value obtained in ozonation experiments. The mineralization reached more than 90% after 60min treatment and the chlorine balance confirms the absence of quantifiable amounts of chlorinated by-products. The energy efficiency was considerably enhanced by shortening the duration of the discharge pulses, which opens the way for further optimization of the electrical circuit design. Copyright © 2017 Elsevier B.V. All rights reserved.

Eyewitness accuracy rates in police showup and lineup presentations: a meta-analytic comparison.

PubMed

Steblay, Nancy; Dysart, Jennifer; Fulero, Solomon; Lindsay, R C

2003-10-01

Meta-analysis is used to compare identification accuracy rates in showups and lineups. Eight papers were located, providing 12 tests of the hypothesis and including 3013 participants. Results indicate that showups generate lower choosing rates than lineups. In target present conditions, showups and lineups yield approximately equal hit rates, and in target absent conditions, showups produce a significantly higher level of correct rejections. False identification rates are approximately equal in showups and lineups when lineup foil choices are excluded from analysis. Dangerous false identifications are more numerous for showups when an innocent suspect resembles the perpetrator. Function of lineup foils, assessment strategies for false identifications, and the potential impact of biases in lineup practice are suggested as additional considerations in evaluation of showup versus lineup efficacy.

A Comparison of the Radio and Optical Time-Evolution of HH 1 and 2

NASA Astrophysics Data System (ADS)

Rodríguez, L. F.; Raga, A. C.; Rodríguez-Kamenetzky, A.; Carrasco-González, C.

2018-04-01

We present a comparison between the time-evolution over the past ≍20 years of the radio continuum and Hα emission of HH 1 and 2. We find that the radio continuum and the Hα emission of both objects show very similar trends, with HH 1 becoming fainter and HH 2 brightening quite considerably (by about a factor of 2). We also find that the FHα /Fff (Hα to freefree continuum) ratio of HH 1 and 2 has higher values than the ones typically found in planetary nebulae (PNe), which we interpret as an indication that the Hα and free-free emission of HH 1/2 is produced in emitting regions with lower temperatures (≍2000 K) than the emission of PNe (with ≍104 K).

Near threshold ⁷Li(p,n) ⁷Be reaction as neutron source for BNCT.

PubMed

Minsky, D M; Kreiner, A J

2015-12-01

(7)Li(p,n)(7)Be is an endothermic reaction and working near its threshold (1.88 MeV) has the advantage of neutron spectra with maximum energies of about 100 keV, considerably lower than at higher beam energies, or than using other neutron-producing reactions or as for the uranium fission spectrum, relevant for BNCT based on nuclear reactors. With this primary energy it is much easier to obtain the energies needed for treating deep seated tumors by BNCT (about 10 keV). This work studies bombarding energies up to 2.05 MeV, different beam incidence angles and the effect of the undesirable gamma production via the (7)Li(p,γp') (7)Li reaction. Copyright © 2015 Elsevier Ltd. All rights reserved.

Multi-wire slurry wafering demonstrations. [slicing silicon ingots for solar arrays

NASA Technical Reports Server (NTRS)

Chen, C. P.

1978-01-01

Ten slicing demonstrations on a multi-wire slurry saw, made to evaluate the silicon ingot wafering capabilities, reveal that the present sawing capabilities can provide usable wafer area from an ingot 1.05m/kg (e.g. kerf width 0.135 mm and wafer thickness 0.265 mm). Satisfactory surface qualities and excellent yield of silicon wafers were found. One drawback is that the add-on cost of producing water from this saw, as presently used, is considerably higher than other systems being developed for the low-cost silicon solar array project (LSSA), primarily because the saw uses a large quantity of wire. The add-on cost can be significantly reduced by extending the wire life and/or by rescue of properly plated wire to restore the diameter.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pak, S.; Sites, J.R.

A Kaufman-type broad beam ion source, used for sputtering and etching purposes, has been operated with Ar, Kr,O/sub 2/ and N/sub 2/ gas inputs over a wide range of beam energies (200-1200 eV) and gas flow rates (1-10 sccm). The maximum ion beam current density for each gas saturates at about 2.5 mA/sq. cm. as gas flow is increased. The discharge threshold voltage necessary to produce a beam and the beam efficiency (beam current/molecular current), however, varied considerably. Kr had the lowest threshold and highest efficiency, Ar next, then N/sub 2/ and O/sub 2/. The ion beam current varied onlymore » weakly with beam energy for low gas flow rates, but showed a factor of two increase when the gas flow was higher.« less

Estimating potential Engelmann spruce seed production on the Fraser Experimental Forest, Colorado

Treesearch

Robert R. Alexander; Carleton B. Edminster; Ross K. Watkins

1986-01-01

Two good, three heavy, and two bumper spruce seed crops were produced during a 15-year period. There was considerable variability in seed crops, however. Not all locations produced good to bumper seed crops when overall yearly ratings averaged good or better; conversely, some locations produced bumper seed crops in 3 or more years. Mathematical relationships,...

Evaluation of cool season precipitation event characteristics over the Northeast US in a suite of downscaled climate model hindcasts

NASA Astrophysics Data System (ADS)

Loikith, Paul C.; Waliser, Duane E.; Kim, Jinwon; Ferraro, Robert

2017-08-01

Cool season precipitation event characteristics are evaluated across a suite of downscaled climate models over the northeastern US. Downscaled hindcast simulations are produced by dynamically downscaling the Modern-Era Retrospective Analysis for Research and Applications version 2 (MERRA2) using the National Aeronautics and Space Administration (NASA)-Unified Weather Research and Forecasting (WRF) regional climate model (RCM) and the Goddard Earth Observing System Model, Version 5 (GEOS-5) global climate model. NU-WRF RCM simulations are produced at 24, 12, and 4-km horizontal resolutions using a range of spectral nudging schemes while the MERRA2 global downscaled run is provided at 12.5-km. All model runs are evaluated using four metrics designed to capture key features of precipitation events: event frequency, event intensity, even total, and event duration. Overall, the downscaling approaches result in a reasonable representation of many of the key features of precipitation events over the region, however considerable biases exist in the magnitude of each metric. Based on this evaluation there is no clear indication that higher resolution simulations result in more realistic results in general, however many small-scale features such as orographic enhancement of precipitation are only captured at higher resolutions suggesting some added value over coarser resolution. While the differences between simulations produced using nudging and no nudging are small, there is some improvement in model fidelity when nudging is introduced, especially at a cutoff wavelength of 600 km compared to 2000 km. Based on the results of this evaluation, dynamical regional downscaling using NU-WRF results in a more realistic representation of precipitation event climatology than the global downscaling of MERRA2 using GEOS-5.

Electrochemical sulfide removal and caustic recovery from spent caustic streams.

PubMed

Vaiopoulou, Eleni; Provijn, Thomas; Prévoteau, Antonin; Pikaar, Ilje; Rabaey, Korneel

2016-04-01

Spent caustic streams (SCS) are produced during alkaline scrubbing of sulfide containing sour gases. Conventional methods mainly involve considerable chemical dosing or energy expenditures entailing high cost but limited benefits. Here we propose an electrochemical treatment approach involving anodic sulfide oxidation preferentially to sulfur coupled to cathodic caustic recovery using a two-compartment electrochemical system. Batch experiments showed sulfide removal efficiencies of 84 ± 4% with concomitant 57 ± 4% efficient caustic production in the catholyte at a final concentration of 6.4 ± 0.1 wt% NaOH (1.6 M) at an applied current density of 100 A m(-2). Subsequent long-term continuous experiments showed that stable cell voltages (i.e. 2.7 ± 0.1 V) as well as constant sulfide removal efficiencies of 67 ± 5% at a loading rate of 47 g(S) L(-1) h(-1) were achieved over a period of 77 days. Caustic was produced at industrially relevant strengths for scrubbing (i.e. 5.1 ± 0.9 wt% NaOH) at current efficiencies of 96 ± 2%. Current density between 0 and 200 A m(-2) and sulfide loading rates of 50-200 g(S) L(-1) d(-1) were tested. The higher the current density the more oxidized the sulfur species produced and the higher the sulfide oxidation. On the contrary, high loading rate resulted in a reduction of sulfide oxidation efficiency. The results obtained in this study together with engineering calculations show that the proposed process could represent a cost-effective approach for sodium and sulfur recovery from SCS. Copyright © 2016 Elsevier Ltd. All rights reserved.

Desktop Design for ESOL Teachers.

ERIC Educational Resources Information Center

Walker, Susan

The guide for teachers of English as a Second Language offers practical advice on the format and layout of instructional materials they produce using desktop publishing technology. An introductory section discusses important design considerations for producing effective materials. Subsequent sections describe how to: organize ideas; outline the…

Microbial-Catalyzed Biotransformation of Multifunctional Triterpenoids Derived from Phytonutrients

PubMed Central

Shah, Syed Adnan Ali; Tan, Huey Ling; Sultan, Sadia; Mohd Faridz, Muhammad Afifi Bin; Mohd Shah, Mohamad Azlan Bin; Nurfazilah, Sharifah; Hussain, Munawar

2014-01-01

Microbial-catalyzed biotransformations have considerable potential for the generation of an enormous variety of structurally diversified organic compounds, especially natural products with complex structures like triterpenoids. They offer efficient and economical ways to produce semi-synthetic analogues and novel lead molecules. Microorganisms such as bacteria and fungi could catalyze chemo-, regio- and stereospecific hydroxylations of diverse triterpenoid substrates that are extremely difficult to produce by chemical routes. During recent years, considerable research has been performed on the microbial transformation of bioactive triterpenoids, in order to obtain biologically active molecules with diverse structures features. This article reviews the microbial modifications of tetranortriterpenoids, tetracyclic triterpenoids and pentacyclic triterpenoids. PMID:25003642

NMR studies on the chemical alteration of soil organic matter precursors during controlled charring

NASA Astrophysics Data System (ADS)

Knicker, Heike

2010-05-01

Beside the production of volatiles, vegetation fire transforms various amounts of labile organic components into recalcitrant dark colored and highly aromatic structures. They are incorporated into soils and are assumed to represent an important sink within the global carbon cycle. In order to elucidate the real importance of PyOM as a C-sink, a good understanding of its chemistry is crucial. Although several 'Black Carbon' (BC) models are reported, a commonly accepted view of the chemistry involved in its formation is still missing. Its biogeochemical recalcitrance is commonly associated with a highly condensed aromatic structure. However, recent studies indicated that this view may be oversimplified for PyOM derived from vegetation fire. In order to bring some more light on the structural properties of PyOM produced during vegetation fire, charred plant residues and model chars derived from typical plant macromolecules (casein, cellulose, lignin and condensed tannins) were subjected to controlled charring under oxic conditions (350°C and 450°C) and then characterized by nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Subsequently, the chemical features of the PyOM were related to its chemical recalcitrance as determined by chemical oxidation with acid potassium dichromate. Charring cellulose (350°C, 8 min) yielded in a low C-recovery (11%). Treating casein in the same way resulted in a survival of 62% of its C and 46% of its N. Comparable high C-recoveries are reported for lignin. After charring Lolium perenne, 34% of its N and C were recovered. NMR-spectroscopic studies revealed that for this sample most of the charred N and C occurred in pyrrole-type structures. Our studies further indicate that the aromatic skeleton of char accumulating after a vegetation fire must contain remains of the lignin backbone and considerable contributions of furans and anhydrosugars from thermally altered cellulose. Enhancing the temperature during the charring of casein to 450°C decreased the C and N recovery to 30% and 23%, respectively. Comparably the C, O and H recovery were also reduced in the cellulose char, but to a considerably higher extent. These changes went along with a further augmentation of the relative contribution of aromatic C. Increased C, H and O losses were also observed for charring of lignin at higher temperature, although they were smaller than those observed for casein and cellulose. The higher temperature considerably altered the chemistry of the lignin char. The atomic H/C ratio, however, remained above 0.5 showing that in average at least every second C is protonated. Subjecting the produced chars to chemical oxidation with acid potassium dichromate clearly demonstrated that the resistance of the casein chars against heat is not necessarily related to chemical recalcitrance. For the char produced at 350°C, only 13% of the C and N remained in the oxidation residues, whereas for that produced at 450°C this value increased to 80%. In contrast, both cellulose chars showed high chemical resistance with a C-survival of more than 80%. Comparatively, the C and N recalcitrance in the grass chars increased with temperature, whereas, the burned wood residues (350°C) suffered an almost complete oxidation. The chars from condensed tannins, on the other hand showed a high chemical resistance independently from the production temperature. In summary, this study confirmed that the thermal, chemical and biological recalcitrance of biochars is related to their chemical structures and N-contents, which on the other hand depend on the source and the respective charring conditions. The resulting high chemical variability of biochars is in accordance with the concept of BC as a continuum and explains the high discrepancy among BC quantifications obtained with common approaches assuming BC as a highly condensed polyaromatic network.

Some aerodynamic considerations related to wind tunnel model surface definition

NASA Technical Reports Server (NTRS)

Gloss, B. B.

1980-01-01

The aerodynamic considerations related to model surface definition are examined with particular emphasis in areas of fabrication tolerances, model surface finish, and orifice induced pressure errors. The effect of model surface roughness texture on skin friction is also discussed. It is shown that at a given Reynolds number, any roughness will produce no skin friction penalty.

Sex, race, and consideration of bariatric surgery among primary care patients with moderate to severe obesity.

PubMed

Wee, Christina C; Huskey, Karen W; Bolcic-Jankovic, Dragana; Colten, Mary Ellen; Davis, Roger B; Hamel, Marybeth

2014-01-01

Bariatric surgery is one of few obesity treatments to produce substantial weight loss but only a small proportion of medically-eligible patients, especially men and racial minorities, undergo bariatric surgery. To describe primary care patients' consideration of bariatric surgery, potential variation by sex and race, and factors that underlie any variation. Telephone interview of 337 patients with a body mass index or BMI > 35 kg/m(2) seen at four diverse primary care practices in Greater-Boston. Patients' consideration of bariatric surgery. Of 325 patients who had heard of bariatric surgery, 34 % had seriously considered surgery. Men were less likely than women and African Americans were less likely than Caucasian patients to have considered surgery after adjustment for sociodemographics and BMI. Comorbid conditions did not explain sex and racial differences but racial differences dissipated after adjustment for quality of life (QOL), which tended to be higher among African American than Caucasian patients. Physician recommendation of bariatric surgery was independently associated with serious consideration for surgery [OR 4.95 (95 % CI 2.81-8.70)], but did not explain variation in consideration of surgery across sex and race. However, if recommended by their doctor, men were as willing and African American and Hispanic patients were more willing to consider bariatric surgery than their respective counterparts after adjustment. Nevertheless, only 20 % of patients reported being recommended bariatric surgery by their doctor and African Americans and men were less likely to receive this recommendation; racial differences in being recommended surgery were also largely explained by differences in QOL. High perceived risk to bariatric surgery was the most commonly cited barrier; financial concerns were uncommonly cited. Single geographic region; examined consideration and not who eventually proceeded with bariatric surgery. African Americans and men were less likely to have considered bariatric surgery and were less likely to have been recommended surgery by their doctors. Differences in how obesity affects QOL appear to account for some of these variations. High perceived risk rather than financial barrier was the major deterrent for patients.

Atmospheric circulation and sounding-derived parameters associated with thunderstorm occurrence in Central Europe

NASA Astrophysics Data System (ADS)

Kolendowicz, Leszek; Taszarek, Mateusz; Czernecki, Bartosz

2017-07-01

The main objective of this study is to examine the influence of atmospheric circulation patterns and sounding-derived parameters on thunderstorm occurrence in Central Europe. Thunderstorm activity tends to increase as one moves from the north to the south of the research area. Maximal thunderstorm occurrence is observed in the summer months, while between October and March such activity is much lower. Thunderstorms are also more frequent in spring than in autumn. In the warm season, the occurrence of thunderstorm is associated with the presence of a trough associated with a low located over the North Sea and Scandinavia. In the cold season, the synoptic pattern indicates a strong zonal flow from the west with significantly higher horizontal pressure gradient compared to the warm season. Thunderstorms are more likely to form when the boundary layer's mixing ratios are higher than 8 g kg- 1. Deep convection is also more likely to occur when the vertical temperature lapse rates (between 800 and 500 hPa pressure layers) exceed 6 °C km- 1. During the cold season, considerably higher lapse rates are needed to produce thunderstorms. The values obtained for the convective available potential energy indicate that at least 50 J kg- 1 is needed to produce a thunderstorm during wintertime and 125 J kg- 1 during summertime. Cold season thunderstorms are formed with a lower instability but with a more dynamic wind field having an average value of deep layer shear that exceeds 20 ms- 1. The best parameter to distinguish thunderstorm from non-thunderstorm days for both winter and summer months is a combination of the square root of the convective available potential energy multiplied by the deep layer shear.

Electrolyzed water and its application in the food industry.

PubMed

Hricova, D; Stephan, R; Zweifel, C

2008-09-01

Electrolyzed water (EW) is gaining popularity as a sanitizer in the food industries of many countries. By electrolysis, a dilute sodium chloride solution dissociates into acidic electrolyzed water (AEW), which has a pH of 2 to 3, an oxidation-reduction potential of >1,100 mV, and an active chlorine content of 10 to 90 ppm, and basic electrolyzed water (BEW), which has a pH of 10 to 13 and an oxidation-reduction potential of -800 to -900 mV. Vegetative cells of various bacteria in suspension were generally reduced by > 6.0 log CFU/ml when AEW was used. However, AEW is a less effective bactericide on utensils, surfaces, and food products because of factors such as surface type and the presence of organic matter. Reductions of bacteria on surfaces and utensils or vegetables and fruits mainly ranged from about 2.0 to 6.0 or 1.0 to 3.5 orders of magnitude, respectively. Higher reductions were obtained for tomatoes. For chicken carcasses, pork, and fish, reductions ranged from about 0.8 to 3.0, 1.0 to 1.8, and 0.4 to 2.8 orders of magnitude, respectively. Considerable reductions were achieved with AEW on eggs. On some food commodities, treatment with BEW followed by AEW produced higher reductions than did treatment with AEW only. EW technology deserves consideration when discussing industrial sanitization of equipment and decontamination of food products. Nevertheless, decontamination treatments for food products always should be considered part of an integral food safety system. Such treatments cannot replace strict adherence to good manufacturing and hygiene practices.

Simulations of the flocculent spiral M33: what drives the spiral structure?

NASA Astrophysics Data System (ADS)

Dobbs, C. L.; Pettitt, A. R.; Corbelli, E.; Pringle, J. E.

2018-05-01

We perform simulations of isolated galaxies in order to investigate the likely origin of the spiral structure in M33. In our models, we find that gravitational instabilities in the stars and gas are able to reproduce the observed spiral pattern and velocity field of M33, as seen in HI, and no interaction is required. We also find that the optimum models have high levels of stellar feedback which create large holes similar to those observed in M33, whilst lower levels of feedback tend to produce a large amount of small scale structure, and undisturbed long filaments of high surface density gas, hardly detected in the M33 disc. The gas component appears to have a significant role in producing the structure, so if there is little feedback, both the gas and stars organise into clear spiral arms, likely due to a lower combined Q (using gas and stars), and the ready ability of cold gas to undergo spiral shocks. By contrast models with higher feedback have weaker spiral structure, especially in the stellar component, compared to grand design galaxies. We did not see a large difference in the behaviour of Qstars with most of these models, however, because Qstars stayed relatively constant unless the disc was more strongly unstable. Our models suggest that although the stars produce some underlying spiral structure, this is relatively weak, and the gas physics has a considerable role in producing the large scale structure of the ISM in flocculent spirals.

Macrophage Biocompatibility of CoCr Wear Particles Produced under Polarization in Hyaluronic Acid Aqueous Solution

PubMed Central

Perez-Maceda, Blanca Teresa; López-Fernández, María Encarnación; Díaz, Iván; Kavanaugh, Aaron; Billi, Fabrizio; Escudero, María Lorenza; García-Alonso, María Cristina; Lozano, Rosa María

2018-01-01

Macrophages are the main cells involved in inflammatory processes and in the primary response to debris derived from wear of implanted CoCr alloys. The biocompatibility of wear particles from a high carbon CoCr alloy produced under polarization in hyaluronic acid (HA) aqueous solution was evaluated in J774A.1 mouse macrophages cultures. Polarization was applied to mimic the electrical interactions observed in living tissues. Wear tests were performed in a pin-on-disk tribometer integrating an electrochemical cell in phosphate buffer solution (PBS) and in PBS supplemented with 3 g/L HA, an average concentration that is generally found in synovial fluid, used as lubricant solution. Wear particles produced in 3 g/L HA solution showed a higher biocompatibility in J774A.1 macrophages in comparison to those elicited by particles obtained in PBS. A considerable enhancement in macrophages biocompatibility in the presence of 3 g/L of HA was further observed by the application of polarization at potentials having current densities typical of injured tissues suggesting that polarization produces an effect on the surface of the metallic material that leads to the production of wear particles that seem to be macrophage-biocompatible and less cytotoxic. The results showed the convenience of considering the influence of the electric interactions in the chemical composition of debris detached from metallic surfaces under wear corrosion to get a better understanding of the biological effects caused by the wear products. PMID:29738506

Fire and Pesticides: A Review of Air Quality Considerations

Treesearch

Parshall B. Bush; Daniel G. Neary; Charles K. McMahon

2000-01-01

The classes of primary chemical products naturally produced by the combustion of forest fuels are: carbon dioxide, water, carbon monoxide, particulate matter, methane and non-methane hydrocarbons, polynuclear aromatic hydrocarbons, nitrogen and sulfur oxides, aldehydes, free radicals, and inorganic elements. Secondary chemical products produced by reactions in smoke...

Short-chain fatty acids and poly-beta-hydroxyalkanoates: (New) Biocontrol agents for a sustainable animal production.

PubMed

Defoirdt, Tom; Boon, Nico; Sorgeloos, Patrick; Verstraete, Willy; Bossier, Peter

2009-01-01

Because of the risk of antibiotic resistance development, there is a growing awareness that antibiotics should be used more carefully in animal production. However, a decreased use of antibiotics could result in a higher frequency of pathogenic bacteria, which in its turn could lead to a higher incidence of infections. Short-chain fatty acids (SCFAs) have long been known to exhibit bacteriostatic activity. These compounds also specifically downregulate virulence factor expression and positively influence the gastrointestinal health of the host. As a consequence, there is currently considerable interest in SCFAs as biocontrol agents in animal production. Polyhydroxyalkanoates (PHAs) are polymers of beta-hydroxy short-chain fatty acids. Currently, PHAs are applied as replacements for synthetic polymers. These biopolymers can be depolymerised by many different microorganisms that produce extracellular PHA depolymerases. Interestingly, different studies provided some evidence that PHAs can also be degraded upon passage through the gastrointestinal tract of animals and consequently, adding these compounds to the feed might result in biocontrol effects similar to those described for SCFAs.

Peroxidase-like activity of apoferritin paired gold clusters for glucose detection.

PubMed

Jiang, Xin; Sun, Cuiji; Guo, Yi; Nie, Guangjun; Xu, Li

2015-02-15

The discovery and application of noble metal nanoclusters have received considerable attention. In this paper, we reported that apoferritin paired gold clusters (Au-Ft) could efficiently catalyze oxidation of 3.3',5.5'-tetramethylbenzidine (TMB) by H2O2 to produce a blue color reaction. Compared with natural enzyme, Au-Ft exhibited higher activity near acidic pH and could be used over a wide range of temperatures. Apoferritin nanocage enhanced the reaction activity of substrate TMB by H2O2. The reaction catalyzed by Au-Ft was found to follow a typical Michaelis-Menten kinetics. The kinetic parameters exhibited a lower K(m) value (0.097 mM) and a higher K(cat) value (5.8 × 10(4) s(-1)) for TMB than that of horse radish peroxidase (HRP). Base on these findings, Au-Ft, acting as a peroxidase mimetic, performed enzymatic spectrophotometric analysis of glucose. This system exhibited acceptable reproducibility and high selectivity in biosening, suggesting that it could have promising applications in the future. Copyright © 2014 Elsevier B.V. All rights reserved.

A comparison of the effects of Nd:YAG and Ho:YAG laser irradiation on dentine and enamel.

PubMed

Cernavin, I

1995-04-01

This preliminary study was undertaken to investigate the effects of Nd:YAG and Ho:YAG lasers on enamel and dentine of extracted teeth. The Ho:YAG laser (spot size 250 microns, energy density 4160 J/cm2) produced a cleaner puncture in dentine with less melting of the surrounding tissue than did the Nd:YAG laser (spot size 20 microns), energy density 50,000 J/cm2), which produced considerable melting and recrystallization of dentine and was more difficult to control. It was possible to cut enamel and dentine with both lasers, but considerable melted and recrystallized enamel was produced. From the limited observations of this study it appears that the Ho:YAG laser is more suitable for cutting both enamel and dentine than the Nd:YAG laser. More work needs to be done to ascertain the effect on enamel and dentine of modification of the parameters of both lasers.

DIRECT AND INDIRECT BIOLOGICAL EFFECTS OF RADIATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobitz, H.

1961-01-01

The primary physical processes, ionization and excitation, induced by radiation in biological materials are discussed. Their effects in causing reduction, decarboxylation, and depolymerization in proteins and deoxyribonucleic acid of the cell nucleus are examined. The action of radiation doses of 100,000- 600,000 r on pollen of Digitalis purpurea maintained at room temperature and at approximates 190 deg C showed that biological activity was destroyed by doses >200,000 r at room temperature, but at approximates 190 deg the pollen retained some activity even after the highest dose. A similar effect was seen with Bacterium cadaveris cells, about 0.5% of which survivedmore » 50000 r given at l8O deg whereas no cells survived 20000 r given at 4 deg . The presence of 1% cysteamine at the higher temperature increased survival 20-fold. Cytochrome c showed markedly different responses to radiation in dry form as compared with aqueous solution. The anhydrous enzyme showed a linear decline in log activity with radiation dose but in aqueous solution the activity declined more slowly at higher doses. The radiation dose to-produce 50% inactivation was 4 x 10/sup 7/ r in dry form and 6 x 10/sup 5/ r in solution, a 67-fold difference. The results suggest that diffusion of the free radicals (H: or OH:) produced in the primary process is considerably hindered at low temperature and by the absence of water. (H.H.D.)« less

Influence of unrecorded alcohol consumption on liver cirrhosis mortality

PubMed Central

Lachenmeier, Dirk W; Monakhova, Yulia B; Rehm, Jürgen

2014-01-01

Unrecorded alcohol includes illegally distributed alcohol as well as homemade or surrogate alcohol which is unintended for consumption by humans (e.g., cosmetics containing alcohol). The highest unrecorded alcohol consumption occurs in Eastern Europe and some of these countries have an over proportional liver cirrhosis mortality. Compounds besides ethanol have been hypothesized as being responsible for this observation. On the other hand, chemical investigations were unable to prove that unrecorded alcohol regularly contains contaminants above toxicological thresholds. However, illegally produced spirits regularly contain higher percentages of alcohol (above 45% by volume), but for considerably less costs compared with licit beverages, potentially causing more problematic patterns of drinking. In this review, it is investigated whether patterns of drinking rather than product composition can explain the liver cirrhosis mortality rates. Statistical examination of World Health Organization country data shows that the originally detected correlation of the percentage of unrecorded alcohol consumption and liver cirrhosis mortality rates disappears when the data is adjusted for the prevalence of heavy episodic drinking. It may be concluded that there is currently a lack of data to demonstrate causality between the composition of illicit spirits (e.g., higher levels of certain contaminants in home-produced products) and liver toxicity on a population scale. Exceptions may be cases of poisoning with antiseptic liquids containing compounds such as polyhexamethyleneguanidine, which were reported to be consumed as surrogate alcohol in Russia, leading to an outbreak of acute cholestatic liver injury, histologically different from conventional alcoholic liver disease. PMID:24966592

EVA Roadmap: New Space Suit for the 21st Century

NASA Technical Reports Server (NTRS)

Yowell, Robert

1998-01-01

New spacesuit design considerations for the extra vehicular activity (EVA) of a manned Martian exploration mission are discussed. Considerations of the design includes:(1) regenerable CO2 removal, (2) a portable life support system (PLSS) which would include cryogenic oxygen produced from in-situ manufacture, (3) a power supply for the EVA, (4) the thermal control systems, (5) systems engineering, (5) space suit systems (materials, and mobility), (6) human considerations, such as improved biomedical sensors and astronaut comfort, (7) displays and controls, and robotic interfaces, such as rovers, and telerobotic commands.

Endocrine and mood responses to two working days in female teachers.

PubMed

Serrano, Miguel Angel; Moya-Albiol, Luís; Salvador, Alicia

2014-01-01

Currently, a considerable amount of work stress is present in school teachers, one of the occupational groups with the highest levels of job strain and burnout. As chronic stress produces significant modifications in emotional adjustment and neuroendocrine functioning, we aimed to investigate the role of these work stress constructs in the endocrine and mood responses of a group of female teachers during two working days (WD) at different moments in the academic year. We studied mood as well as levels of cortisol and testosterone, representative of a predominant catabolic or anabolic balance. Our results showed that higher "control" was associated with higher positive mood (p = .028 on WD1 and p = .057 on WD2) and salivary testosterone (Tsal) (p = .022 on WD1), whereas "demands" and "total job strain" were related to negative mood (p = .011 and p = .015, respectively). Participants with higher scores on "total burnout" and "emotional exhaustion" also had higher negative mood (p < .05 in all cases). Depersonalization correlated positively with negative mood (p = .019 and p = .006 on WD1 and WD2, respectively). Finally, personal accomplishment showed an inverse relationship with negative mood (p = .038 on WD2). These results are useful for job risk prevention and interventions that should focus on the control dimension of the job strain questionnaire and on personal accomplishment from the burnout scale.

Excited hydrogen bonds in the molecular mechanism of muscle contraction.

PubMed

Bespalova, S V; Tolpygo, K B

1991-11-21

The mechanism of muscle contraction is considered. The hydrolysis of an ATP molecule is assumed to produce the excitation of hydrogen bonds A--H...B between electronegative atoms A and B, which are contained in the myosin head and actin filament. This excitation energy epsilon f depends on the interatomic distance AB = R and generates the tractive force f = -delta epsilon f/delta R, that makes atoms AB approach each other. The swing of the myosin head results in macroscopic mutual displacement of actin and myosin polymers. The motion of the actin filament under the action of this force is studied. The conditions under which a considerable portion of the excitation energy converts into the potential tension energy of the actin filament are analysed, and the probability of higher muscle efficiency existence is discussed.

DC High Voltage Conditioning of Photoemission Guns at Jefferson Lab FEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hernandez-Garcia, C.; Benson, S. V.; Biallas, G.

2009-08-04

DC high voltage photoemission electron guns with GaAs photocathodes have been used to produce polarized electron beams for nuclear physics experiments for about 3 decades with great success. In the late 1990s, Jefferson Lab adopted this gun technology for a free electron laser (FEL), but to assist with high bunch charge operation, considerably higher bias voltage is required compared to the photoguns used at the Jefferson Lab Continuous Electron Beam Accelerator Facility. The FEL gun has been conditioned above 400 kV several times, albeit encountering non-trivial challenges with ceramic insulators and field emission from electrodes. Recently, high voltage processing withmore » krypton gas was employed to process very stubborn field emitters. This work presents a summary of the high voltage techniques used to high voltage condition the Jefferson Lab FEL photoemission gun.« less

Molecular architecture of smell and taste in Drosophila.

PubMed

Vosshall, Leslie B; Stocker, Reinhard F

2007-01-01

The chemical senses-smell and taste-allow animals to evaluate and distinguish valuable food resources from dangerous substances in the environment. The central mechanisms by which the brain recognizes and discriminates attractive and repulsive odorants and tastants, and makes behavioral decisions accordingly, are not well understood in any organism. Recent molecular and neuroanatomical advances in Drosophila have produced a nearly complete picture of the peripheral neuroanatomy and function of smell and taste in this insect. Neurophysiological experiments have begun to provide insight into the mechanisms by which these animals process chemosensory cues. Given the considerable anatomical and functional homology in smell and taste pathways in all higher animals, experimental approaches in Drosophila will likely provide broad insights into the problem of sensory coding. Here we provide a critical review of the recent literature in this field and comment on likely future directions.

POLICY ANALYSIS OF PRODUCED WATER ISSUES ASSOCIATED WITH IN-SITU THERMAL TECHNOLOGIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert Keiter; John Ruple; Heather Tanana

2011-02-01

Commercial scale oil shale and oil sands development will require water, the amount of which will depend on the technologies adopted and the scale of development that occurs. Water in oil shale and oil sands country is already in scarce supply, and because of the arid nature of the region and limitations on water consumption imposed by interstate compacts and the Endangered Species Act, the State of Utah normally does not issue new water rights in oil shale or oil sands rich areas. Prospective oil shale and oil sands developers that do not already hold adequate water rights can acquiremore » water rights from willing sellers, but large and secure water supplies may be difficult and expensive to acquire, driving oil shale and oil sands developers to seek alternative sources of supply. Produced water is one such potential source of supply. When oil and gas are developed, operators often encounter ground water that must be removed and disposed of to facilitate hydrocarbon extraction. Water produced through mineral extraction was traditionally poor in quality and treated as a waste product rather than a valuable resource. However, the increase in produced water volume and the often-higher quality water associated with coalbed methane development have drawn attention to potential uses of produced water and its treatment under appropriations law. This growing interest in produced water has led to litigation and statutory changes that must be understood and evaluated if produced water is to be harnessed in the oil shale and oil sands development process. Conversely, if water is generated as a byproduct of oil shale and oil sands production, consideration must be given to how this water will be disposed of or utilized in the shale oil production process. This report explores the role produced water could play in commercial oil shale and oil sands production, explaining the evolving regulatory framework associated with produced water, Utah water law and produced water regulation, and the obstacles that must be overcome in order for produced water to support the nascent oil shale and oil sands industries.« less

Partnerships panel: the use of contractors and partnerships in public forest recreation: some considerations

Treesearch

Ben W. Twight

1995-01-01

This paper argues that short term competitive contracting and "partnerships" with low bidders cannot produce the quality or efficiency that highly socialized normatively guided career organizations, both public and private, can produce. High quality maximum efficiency production requires highly socialized primary group types of organizations, guided by a...

15 CFR 301.5 - Processing of applications by the Department of Commerce.

Code of Federal Regulations, 2013 CFR

2013-01-01

... is as a general rule either produced for stock, produced on order, or custom-made and; (B) An... must be made on a timely basis to ensure their consideration by the Director and the technical... teaching nonscientific courses (e.g., music, home economics, journalism, drama); in presenting a variety of...

15 CFR 301.5 - Processing of applications by the Department of Commerce.

Code of Federal Regulations, 2014 CFR

2014-01-01

... is as a general rule either produced for stock, produced on order, or custom-made and; (B) An... must be made on a timely basis to ensure their consideration by the Director and the technical... teaching nonscientific courses (e.g., music, home economics, journalism, drama); in presenting a variety of...

15 CFR 301.5 - Processing of applications by the Department of Commerce.

Code of Federal Regulations, 2012 CFR

2012-01-01

... is as a general rule either produced for stock, produced on order, or custom-made and; (B) An... must be made on a timely basis to ensure their consideration by the Director and the technical... teaching nonscientific courses (e.g., music, home economics, journalism, drama); in presenting a variety of...

15 CFR 301.5 - Processing of applications by the Department of Commerce.

Code of Federal Regulations, 2011 CFR

2011-01-01

... is as a general rule either produced for stock, produced on order, or custom-made and; (B) An... must be made on a timely basis to ensure their consideration by the Director and the technical... teaching nonscientific courses (e.g., music, home economics, journalism, drama); in presenting a variety of...

Precision in ground-based solar polarimetry: simulating the role of adaptive optics.

PubMed

Krishnappa, Nagaraju; Feller, Alex

2012-11-20

Accurate measurement of polarization in spectral lines is important for the reliable inference of magnetic fields on the Sun. For ground-based observations, polarimetric precision is severely limited by the presence of Earth's atmosphere. Atmospheric turbulence (seeing) produces signal fluctuations, which combined with the nonsimultaneous nature of the measurement process cause intermixing of the Stokes parameters known as seeing-induced polarization cross talk. Previous analysis of this effect [Appl. Opt. 43, 3817 (2004)] suggests that cross talk is reduced not only with increase in modulation frequency but also by compensating the seeing-induced image aberrations by an adaptive optics (AO) system. However, in those studies the effect of higher-order image aberrations than those corrected by the AO system was not taken into account. We present in this paper an analysis of seeing-induced cross talk in the presence of higher-order image aberrations through numerical simulation. In this analysis we find that the amount of cross talk among Stokes parameters is practically independent of the degree of image aberration corrected by an AO system. However, higher-order AO corrections increase the signal-to-noise ratio by reducing the seeing caused image smearing. Further we find, in agreement with the earlier results, that cross talk is reduced considerably by increasing the modulation frequency.

Target fragmentation in proton-nucleus and16O-nucleus reactions at 60 and 200 GeV/nucleon

NASA Astrophysics Data System (ADS)

Albrecht, R.; Awes, T. C.; Baktash, C.; Beckmann, P.; Claesson, G.; Berger, F.; Bock, R.; Dragon, L.; Ferguson, R. L.; Franz, A.; Garpman, S.; Glasow, R.; Gustafsson, H. Å.; Gutbrod, H. H.; Kampert, K. H.; Kolb, B. W.; Kristiansson, P.; Lee, I. Y.; Löhner, H.; Lund, I.; Obenshain, F. E.; Oskarsson, A.; Otterlund, I.; Peitzmann, T.; Persson, S.; Plasil, F.; Poskanzer, A. M.; Purschke, M.; Ritter, H. G.; Santo, R.; Schmidt, H. R.; Siemiarczuk, T.; Sorensen, S. P.; Stenlund, E.; Young, G. R.

1988-03-01

Target remnants with Z<3 from proton-nucleus and16O-nucleus reactions at 60 and 200 GeV/nucleon were measured in the angular range from 30° to 160° (-1.7<η<1.3) employing the Plastic Ball detector. The excitation energy of the target spectator matter in central oxygen-induced collisions is found to be high enough to allow for complete disintegration of the target nucleus into fragments with Z<3. The average longitudinal momentum transfer per proton to the target in central collisions is considerably higher in the case of16O-induced reactions (≈300 MeV/c) than in proton-induced reactions (≈130 MeV/c). The baryon rapidity distributions are roughly in agreement with one-fluid hydrodynamical calculations at 60 GeV/nucleon16O+Au but are in disagreement at 200 GeV/nucleon, indicating the higher degree of transparency at the higher bombarding energy. Both, the transverse momenta of target spectators and the entropy produced in the target fragmentation region are compared to those attained in head-on collisions of two heavy nuclei at Bevalac energies. They are found to be comparable or do even exceed the values for the participant matter at beam energies of about 1 2 GeV/nucleon.

Influence of disintegrants in different substrate physical form on dimensional recovery of multi-component tablet.

PubMed

Sarkar, Srimanta; Ooi, Shing Ming; Liew, Celine Valeria; Tan, Bing Xun; Heng, Paul Wan Sia

2014-11-20

This study investigated the influence of different disintegrants, present in different substrate physical forms, on dimensional recovery of multi-component tablets prepared at different compression pressures. Formulations containing model drug, metformin, (10%, w/w), different disintegrants (10%, w/w), and lactose (80%, w/w) were compressed directly or after granulation using polyvinyl pyrrolidone (1%, w/w) as binder, into tablets (350 mg, 10mm diameter) at 150, 200, and 250 N/mm(2) compression pressures. Tablets were characterized for immediate dimensional recovery (IR) after ejection from the die, latent dimensional recovery (LR) over 24 h, tensile strength, and disintegration. The IR was predominantly contributed by crystalline components whereas LR was brought about by polymeric materials. With increased compression pressure, higher degree of plastic deformation of the polymeric disintegrants resulted in tablet with lower LR and higher tensile strength. Presence of polyvinyl pyrrolidone in the granules contributed considerably to plastic deformation, and the tablets produced had lower LR, higher tensile strength, and longer disintegration time. This study indicated that use of granules as the feed substrate physical form and a prudent selection of components may enable the coating of resultant tablets immediately after compression without the risk of coat damage due to LR. Copyright © 2014 Elsevier B.V. All rights reserved.

Bleaching effects of massecuite on some properties of crystallized sugar beet and milk chocolate bars produced.

PubMed

Sadjadi, F Seyed; Honarvar, M; Kalbasi-Ashtari, A; Motaghian, P

2018-04-01

Four kinds of bleached, unbleached, second and third crystal sugars (BCS, UCS, SCS and TCS) were made from different massecuites in a sugar-beet factory, and their physiochemical (polarization, invert sugar, colorants, pH, ash and SO 2 ), microbiological and functional properties were measured. While the polarization of UCS, SCS and TCS were lower than BCS; their invert sucrose, colorants, pH and ash contents were significantly higher than BCS. The phenols and betaine of BCS, UCS, SCS, and TCS were 144, 401, 384 and 673 (mg/100 g); and 244, 791, 4662, and 6589 (mg/100 g); respectively. Whereas the phenol of milk chocolate bars (MCB) made with UCS, SCS, and TCS were only 10% higher than MCB completed with BCS; their betaine contents were substantially (up to 16 times) higher than the ones finished with BCS. Sensory evaluation showed that the MCB prepared with three sugars including UCS, SCS and TCS had significantly higher glossiness, brittleness, flavor and mouth feel than those made with BCS. The greater colorants, ash content and inverted sugars of UCS, SCS and TCS (in comparison with BCS) made considerable improvements in the glossiness, flavor and brittleness of MCB, respectively. BCS had 8 ppm of toxic sulfur; whereas, UCS, SCS and TCS had no detectable sulfur and significantly higher beneficial copper content than BCS. No pathogenic microorganism were detected in UCS, SCS, TCS or their subsequent MCB. Our results highly recommend using UCS, SCS and TCS instead of BCS in food products (such as MCB) due to their higher health benefits.

Bilateral coordination and the motor basis of female preference for sexual signals in canary song

PubMed Central

Suthers, Roderick A.; Vallet, Eric; Kreutzer, Michel

2012-01-01

SUMMARY The preference of female songbirds for particular traits in the songs of courting males has received considerable attention, but the relationship of preferred traits to male quality is poorly understood. Female domestic canaries (Serinus canaria, Linnaeus) preferentially solicit copulation with males that sing special high repetition rate, wide-band, multi-note syllables, called ‘sexy’ or A-syllables. Syllables are separated by minibreaths but each note is produced by pulsatile expiration, allowing high repetition rates and long duration phrases. The wide bandwidth is achieved by including two notes produced sequentially on opposite sides of the syrinx, in which the left and right sides are specialized for low or high frequencies, respectively. The emphasis of low frequencies is facilitated by a positive relationship between syllable repetition rate and the bandwidth of the fundamental frequency of notes sung by the left syrinx, such that bandwidth increases with increasing syllable repetition rate. The temporal offset between notes prevents cheating by unilaterally singing a note on the left side with a low fundamental frequency and prominent higher harmonics. The syringeal and respiratory motor patterns by which sexy syllables are produced support the hypothesis that these syllables provide a sensitive vocal–auditory indicator of a male's performance limit for the rapid, precisely coordinated interhemispheric switching, which is essential for many sensory and motor processes involving specialized contributions from each cerebral hemisphere. PMID:22875764

Agglomeration of SRC residues. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Theodore, F.W.; Wasson, G.E.

1982-01-01

EPRI contracted with CCDC to agglomerate Kerr-McGee ash concentrate and determine whether the agglomerates could be used as a fixed-bed gasifier feed. Briquettes were produced from Kerr-McGee ash concentrate which met CCDC's strength criteria for handling as feed to a fixed-bed gasifier. In addition, when shock heated under conditions simulating gasifier conditions, strong coke was produced demonstrating that the briquettes will not disintegrate during the initial temperature shock when charged to the gasifier. The conclusion of this study is that briquettes produced from the Kerr-McGee ash concentrate studied could be considered as feed for a fixed-bed gasifier. The CO/sub 2/-carbonmore » reactivity of the briquettes had values between a typical eastern and western coal. In the case of a dry bottom gasifier where the reactivity is important, it is not clear-cut whether the ash concentrate briquettes would be an economical feed. A closer inspection by a gasifier manufacturer is needed to resolve this issue. Since higher gasification temperatures are used in a slagging gasifier, the reactivity question is eliminated and the briquettes should be considered as a feed. This study does not deal with the exact design of a gasifier since this is a function of the type used. The gasifier manufacturer should be considered in future work for their input on critical design considerations i.e. stirrer design, etc.« less

Some enzymes of carbohydrate metabolism in Mesocestoides corti and Heterakis spumosa.

PubMed

Dubinský, P; Ruscinová, B; Hetmanski, S L; Arme, C; Turceková, L; Rybos, M

1991-09-01

The activities of selected enzymes of carbohydrate metabolism were measured in tetrathyridia of Mesocestoides corti and in adult females and males of Heterakis spumosa. When the species were compared, only lactate dehydrogenase and phosphoenolpyruvate carboxykinase activities were considerably higher in M. corti. Activities of other enzymes were higher in H. spumosa, with malate dehydrogenase activity being considerably so. In H. spumosa, enzyme activity was higher, and succinate dehydrogenase markedly so in males, when compared with females. Tetrathyridia aged 170 and 210 days show relatively stable malate and lactate dehydrogenase activities, and mice of ICR and BALB/c strains are suitable for the maintenance of tetrathyridia.

Optomechanical Design and Analysis Considerations on the Lunar Orbiter Laser Altimeter

NASA Technical Reports Server (NTRS)

Schmidt. Stephen; Mamakos, William; Matzinger, Elizabeth; Wall, Sheila

2007-01-01

This paper presents the mechanical design and analysis work completed on the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. LOLA will also look for evidence of ice water in the permanently shadowed regions around the lunar poles. Beryllium was chosen as the primary material for the LOLA Optical Transmitter Assembly to take advantage of the material's low mass density for light weight optical instrument design and for CTE matching of the refractive optical components. In addition, the thermal conductivity and specific heat of beryllium minimizes thermal gradients and thermal excursions. Special consideration must be made for the planning and preparation to fabricate beryllium components, as well as the preparation and cleaning of the components for gold plating. Assembly challenges include handling, precision cleaning and integration and testing. Structural analysis considerations include following General Environmental Verification Specification (GEVS) guidelines for GSFC payloads. The GEVS random environment for LOLA has an acceptance level of 10.0 Grms, which was analyzed for higher frequency transients. The low frequency transients were analyzed using a Mass Acceleration Curve to obtain an equivalent static loading. In addition, Structural-Thermal-Optical analysis, commonly referred to as STOP analysis, was completed to predict optical performance under the instrument's operational thermal environment. This included stress and distortion analysis on the receiver telescope lens.

Reagent and labor cost optimization through automation of fluorescence in situ hybridization (FISH) with the VP 2000: an Italian case study.

PubMed

Zanatta, Lucia; Valori, Laura; Cappelletto, Eleonora; Pozzebon, Maria Elena; Pavan, Elisabetta; Dei Tos, Angelo Paolo; Merkle, Dennis

2015-02-01

In the modern molecular diagnostic laboratory, cost considerations are of paramount importance. Automation of complex molecular assays not only allows a laboratory to accommodate higher test volumes and throughput but also has a considerable impact on the cost of testing from the perspective of reagent costs, as well as hands-on time for skilled laboratory personnel. The following study tracked the cost of labor (hands-on time) and reagents for fluorescence in situ hybridization (FISH) testing in a routine, high-volume pathology and cytogenetics laboratory in Treviso, Italy, over a 2-y period (2011-2013). The laboratory automated FISH testing with the VP 2000 Processor, a deparaffinization, pretreatment, and special staining instrument produced by Abbott Molecular, and compared hands-on time and reagent costs to manual FISH testing. The results indicated significant cost and time saving when automating FISH with VP 2000 when more than six FISH tests were run per week. At 12 FISH assays per week, an approximate total cost reduction of 55% was observed. When running 46 FISH specimens per week, the cost saving increased to 89% versus manual testing. The results demonstrate that the VP 2000 processor can significantly reduce the cost of FISH testing in diagnostic laboratories. © 2014 Society for Laboratory Automation and Screening.

Performance benchmarking of four cell-free protein expression systems.

PubMed

Gagoski, Dejan; Polinkovsky, Mark E; Mureev, Sergey; Kunert, Anne; Johnston, Wayne; Gambin, Yann; Alexandrov, Kirill

2016-02-01

Over the last half century, a range of cell-free protein expression systems based on pro- and eukaryotic organisms have been developed and have found a range of applications, from structural biology to directed protein evolution. While it is generally accepted that significant differences in performance among systems exist, there is a paucity of systematic experimental studies supporting this notion. Here, we took advantage of the species-independent translation initiation sequence to express and characterize 87 N-terminally GFP-tagged human cytosolic proteins of different sizes in E. coli, wheat germ (WGE), HeLa, and Leishmania-based (LTE) cell-free systems. Using a combination of single-molecule fluorescence spectroscopy, SDS-PAGE, and Western blot analysis, we assessed the expression yields, the fraction of full-length translation product, and aggregation propensity for each of these systems. Our results demonstrate that the E. coli system has the highest expression yields. However, we observe that high expression levels are accompanied by production of truncated species-particularly pronounced in the case of proteins larger than 70 kDa. Furthermore, proteins produced in the E. coli system display high aggregation propensity, with only 10% of tested proteins being produced in predominantly monodispersed form. The WGE system was the most productive among eukaryotic systems tested. Finally, HeLa and LTE show comparable protein yields that are considerably lower than the ones achieved in the E. coli and WGE systems. The protein products produced in the HeLa system display slightly higher integrity, whereas the LTE-produced proteins have the lowest aggregation propensity among the systems analyzed. The high quality of HeLa- and LTE-produced proteins enable their analysis without purification and make them suitable for analysis of multi-domain eukaryotic proteins. © 2015 Wiley Periodicals, Inc.

High-resolution precipitation data derived from dynamical downscaling using the WRF model for the Heihe River Basin, northwest China

NASA Astrophysics Data System (ADS)

Zhang, Xuezhen; Xiong, Zhe; Zheng, Jingyun; Ge, Quansheng

2018-02-01

The community of climate change impact assessments and adaptations research needs regional high-resolution (spatial) meteorological data. This study produced two downscaled precipitation datasets with spatial resolutions of as high as 3 km by 3 km for the Heihe River Basin (HRB) from 2011 to 2014 using the Weather Research and Forecast (WRF) model nested with Final Analysis (FNL) from the National Center for Environmental Prediction (NCEP) and ERA-Interim from the European Centre for Medium-Range Weather Forecasts (ECMWF) (hereafter referred to as FNLexp and ERAexp, respectively). Both of the downscaling simulations generally reproduced the observed spatial patterns of precipitation. However, users should keep in mind that the two downscaled datasets are not exactly the same in terms of observations. In comparison to the remote sensing-based estimation, the FNLexp produced a bias of heavy precipitation centers. In comparison to the ground gauge-based measurements, for the warm season (May to September), the ERAexp produced more precipitation (root-mean-square error (RMSE) = 295.4 mm, across the 43 sites) and more heavy rainfall days, while the FNLexp produced less precipitation (RMSE = 115.6 mm) and less heavy rainfall days. Both the ERAexp and FNLexp produced considerably more precipitation for the cold season (October to April) with RMSE values of 119.5 and 32.2 mm, respectively, and more heavy precipitation days. Along with simulating a higher number of heavy precipitation days, both the FNLexp and ERAexp also simulated stronger extreme precipitation. Sensitivity experiments show that the bias of these simulations is much more sensitive to micro-physical parameterizations than to the spatial resolution of topography data. For the HRB, application of the WSM3 scheme may improve the performance of the WRF model.

AC Loss Analysis of MgB2-Based Fully Superconducting Machines

NASA Astrophysics Data System (ADS)

Feddersen, M.; Haran, K. S.; Berg, F.

2017-12-01

Superconducting electric machines have shown potential for significant increase in power density, making them attractive for size and weight sensitive applications such as offshore wind generation, marine propulsion, and hybrid-electric aircraft propulsion. Superconductors exhibit no loss under dc conditions, though ac current and field produce considerable losses due to hysteresis, eddy currents, and coupling mechanisms. For this reason, many present machines are designed to be partially superconducting, meaning that the dc field components are superconducting while the ac armature coils are conventional conductors. Fully superconducting designs can provide increases in power density with significantly higher armature current; however, a good estimate of ac losses is required to determine the feasibility under the machines intended operating conditions. This paper aims to characterize the expected losses in a fully superconducting machine targeted towards aircraft, based on an actively-shielded, partially superconducting machine from prior work. Various factors are examined such as magnet strength, operating frequency, and machine load to produce a model for the loss in the superconducting components of the machine. This model is then used to optimize the design of the machine for minimal ac loss while maximizing power density. Important observations from the study are discussed.

Discrete False-Discovery Rate Improves Identification of Differentially Abundant Microbes.

PubMed

Jiang, Lingjing; Amir, Amnon; Morton, James T; Heller, Ruth; Arias-Castro, Ery; Knight, Rob

2017-01-01

Differential abundance testing is a critical task in microbiome studies that is complicated by the sparsity of data matrices. Here we adapt for microbiome studies a solution from the field of gene expression analysis to produce a new method, discrete false-discovery rate (DS-FDR), that greatly improves the power to detect differential taxa by exploiting the discreteness of the data. Additionally, DS-FDR is relatively robust to the number of noninformative features, and thus removes the problem of filtering taxonomy tables by an arbitrary abundance threshold. We show by using a combination of simulations and reanalysis of nine real-world microbiome data sets that this new method outperforms existing methods at the differential abundance testing task, producing a false-discovery rate that is up to threefold more accurate, and halves the number of samples required to find a given difference (thus increasing the efficiency of microbiome experiments considerably). We therefore expect DS-FDR to be widely applied in microbiome studies. IMPORTANCE DS-FDR can achieve higher statistical power to detect significant findings in sparse and noisy microbiome data compared to the commonly used Benjamini-Hochberg procedure and other FDR-controlling procedures.

Analysing generator matrices G of similar state but varying minimum determinants

NASA Astrophysics Data System (ADS)

Harun, H.; Razali, M. F.; Rahman, N. A. Abdul

2016-10-01

Since Tarokh discovered Space-Time Trellis Code (STTC) in 1998, a considerable effort has been done to improve the performance of the original STTC. One way of achieving enhancement is by focusing on the generator matrix G, which represents the encoder structure for STTC. Until now, researchers have only concentrated on STTCs of different states in analyzing the performance of generator matrix G. No effort has been made on different generator matrices G of similar state. The reason being, it is difficult to produce a wide variety of generator matrices G with diverse minimum determinants. In this paper a number of generator matrices G with minimum determinant of four (4), eight (8) and sixteen (16) of the same state (i.e., 4-PSK) have been successfully produced. The performance of different generator matrices G in term of their bit error rate and signal-to-noise ratio for a Rayleigh fading environment are compared and evaluated. It is found from the MATLAB simulation that at low SNR (<8), the BER of generator matrices G with smaller minimum determinant is comparatively lower than those of higher minimum determinant. However, at high SNR (>14) there is no significant difference between the BER of these generator matrices G.

Fabrication of low reflective nanopore-type black Si layer using one-step Ni-assisted chemical etching for Si solar cell application

NASA Astrophysics Data System (ADS)

Takaloo, AshkanVakilipour; Kolahdouz, Mohammadreza; Poursafar, Jafar; Es, Firat; Turan, Rasit; Ki-Joo, Seung

2018-03-01

Nanotextured Si fabricated through metal-assisted chemical etching (MACE) technique exhibits a promising potential for producing antireflective layer for photovoltaic (PV) application. In this study, a novel single-step nickel (Ni) assisted etching technique was applied to produce an antireflective, nonporous Si (black Si) in an aqueous solution containing hydrofluoric acid (HF), hydrogen peroxide (H2O2) and NiSO4 at 40 °C. Field emission scanning electron microscope was used to characterize different morphologies of the textured Si. Optical reflection measurements of samples were carried out to compare the reflectivity of different morphologies. Results indicated that vertical as well as horizontal pores with nanosized diameters were bored in the Si wafer after 1 h treatment in the etching solution containing different molar ratios of H2O2 to HF. Increasing H2O2 concentration in electrochemical etching solution had a considerable influence on the morphology due to higher injection of positive charges from Ni atoms onto the Si surface. Optimized concentration of H2O2 led to formation of an antireflective layer with 2.1% reflectance of incident light.

Water reclamation during drinking water treatments using polyamide nanofiltration membranes on a pilot scale.

PubMed

Kukučka, Miroslav; Kukučka, Nikoleta; Habuda-Stanić, Mirna

2016-09-01

The aim of this study was to investigate the performances of polyamide nanofiltration membranes during water reclamation. The study was conducted using nanofiltration concentrates obtained from two different nanofiltration drinking water treatment plants placed in the northern part of Serbia (Kikinda and Zrenjanin). Used nanofiltration concentrates contained high concentrations of arsenic (45 and 451 μg/L) and natural organic matter (43.1 and 224.40 mgKMnO4/L). Performances of polyamide nanofiltration membranes during water reclamation were investigated under various fluxes and transmembrane pressures in order to obtain drinking water from nanofiltration concentrates and, therefore, reduce the amount of produced concentrates and minimize the waste that has to be discharged in the environment. Applied polyamide nanofiltration membranes showed better removal efficiency during water reclamation when the concentrate with higher content of arsenic and natural organic matter was used while the obtained permeates were in accordance with European regulations. This study showed that total concentrate yield can be reduced to ~5 % of the optimum flux value, in both experiments. The obtained result for concentrate yield under the optimum flux presents considerable amount of reclaimed drinking water and valuable reduced quantity of produced wastewater.

Parabolic equation for nonlinear acoustic wave propagation in inhomogeneous moving media

NASA Astrophysics Data System (ADS)

Aver'yanov, M. V.; Khokhlova, V. A.; Sapozhnikov, O. A.; Blanc-Benon, Ph.; Cleveland, R. O.

2006-12-01

A new parabolic equation is derived to describe the propagation of nonlinear sound waves in inhomogeneous moving media. The equation accounts for diffraction, nonlinearity, absorption, scalar inhomogeneities (density and sound speed), and vectorial inhomogeneities (flow). A numerical algorithm employed earlier to solve the KZK equation is adapted to this more general case. A two-dimensional version of the algorithm is used to investigate the propagation of nonlinear periodic waves in media with random inhomogeneities. For the case of scalar inhomogeneities, including the case of a flow parallel to the wave propagation direction, a complex acoustic field structure with multiple caustics is obtained. Inclusion of the transverse component of vectorial random inhomogeneities has little effect on the acoustic field. However, when a uniform transverse flow is present, the field structure is shifted without changing its morphology. The impact of nonlinearity is twofold: it produces strong shock waves in focal regions, while, outside the caustics, it produces higher harmonics without any shocks. When the intensity is averaged across the beam propagating through a random medium, it evolves similarly to the intensity of a plane nonlinear wave, indicating that the transverse redistribution of acoustic energy gives no considerable contribution to nonlinear absorption.

Evidential evaluation of DNA profiles using a discrete statistical model implemented in the DNA LiRa software.

PubMed

Puch-Solis, Roberto; Clayton, Tim

2014-07-01

The high sensitivity of the technology for producing profiles means that it has become routine to produce profiles from relatively small quantities of DNA. The profiles obtained from low template DNA (LTDNA) are affected by several phenomena which must be taken into consideration when interpreting and evaluating this evidence. Furthermore, many of the same phenomena affect profiles from higher amounts of DNA (e.g. where complex mixtures has been revealed). In this article we present a statistical model, which forms the basis of software DNA LiRa, and that is able to calculate likelihood ratios where one to four donors are postulated and for any number of replicates. The model can take into account dropin and allelic dropout for different contributors, template degradation and uncertain allele designations. In this statistical model unknown parameters are treated following the Empirical Bayesian paradigm. The performance of LiRa is tested using examples and the outputs are compared with those generated using two other statistical software packages likeLTD and LRmix. The concept of ban efficiency is introduced as a measure for assessing model sensitivity. Copyright © 2014. Published by Elsevier Ireland Ltd.

Microstructure and Mechanical Properties of Ultrafine-Grained Al-6061 Prepared Using Intermittent Ultrasonic-Assisted Equal-Channel Angular Pressing

NASA Astrophysics Data System (ADS)

Lu, Jianxun; Wu, Xiaoyu; Wu, Zhaozhi; Liu, Zhiyuan; Guo, Dengji; Lou, Yan; Ruan, Shuangchen

2017-10-01

Equal-channel angular pressing (ECAP) is an efficient technique to achieve grain refinement in a wide range of materials. However, the extrusion process requires an excessive extrusion force, the microstructure of ECAPed specimens scatters heterogeneously because of considerable fragmentation of the structure and strain heterogeneity, and the resultant ultrafine grains exhibit poor thermal stability. The intermittent ultrasonic-assisted ECAP (IU-ECAP) approach was proposed to address these issues. In this work, ECAP and IU-ECAP were applied to produce ultrafine-grained Al-6061 alloys, and the differences in their mechanical properties, microstructural characteristics, and thermal stability were investigated. Mechanical testing demonstrated that the necessary extrusion force for IU-ECAP was significantly reduced; even more, the microhardness and ultimate tensile strength were strengthened. In addition, the IU-ECAPed Al alloy exhibited a smaller grain size with a more homogeneous microstructure. X-ray diffraction analysis indicated that the intensities of the textures were weakened using IU-ECAP, and a more homogeneous microstructure and larger dislocation densities were obtained. Investigation of the thermal stability revealed that the ultrafine-grained materials produced using IU-ECAP recrystallized at higher temperature or after longer time; the materials thus exhibited improved thermal stability.

YCL047C/POF1 is a novel nicotinamide mononucleotide adenylyltransferase (NMNAT) in Saccharomyces cerevisiae.

PubMed

Kato, Michiko; Lin, Su-Ju

2014-05-30

NAD(+) is an essential metabolic cofactor involved in various cellular biochemical processes. Nicotinamide riboside (NR) is an endogenously produced key pyridine metabolite that plays important roles in the maintenance of NAD(+) pool. Using a NR-specific cell-based screen, we identified mutants that exhibit altered NR release phenotype. Yeast cells lacking the ORF YCL047C/POF1 release considerably more NR compared with wild type, suggesting that POF1 plays an important role in NR/NAD(+) metabolism. The amino acid sequence of Pof1 indicates that it is a putative nicotinamide mononucleotide adenylyltransferase (NMNAT). Unlike other yeast NMNATs, Pof1 exhibits NMN-specific adenylyltransferase activity. Deletion of POF1 significantly lowers NAD(+) levels and decreases the efficiency of NR utilization, resistance to oxidative stress, and NR-induced life span extension. We also show that NR is constantly produced by multiple nucleotidases and that the intracellular NR pools are likely to be compartmentalized, which contributes to the regulation of NAD(+) homeostasis. Our findings may contribute to the understanding of the molecular basis and regulation of NAD(+) metabolism in higher eukaryotes. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

Occupational safety considerations with hydrazine

NASA Technical Reports Server (NTRS)

Clewell, Harvey J., III; Mcdougal, James N.; George, Marilyn E.; Andersen, Melvin E.

1992-01-01

Hydrazine is a reducing agent that is most commonly used as a propellant and as an oxygen scavenger in boilers. Hydrazine is extremely irritating and has been demonstrated to produce both acute and chronic toxicity. As a result, the established permissible inhalation exposure limits are very low, and respiration protection is required whenever vapors are present. Liquid hydrazine penetrates the skin and produces a chemical burn; therefore, some protective measures must also be taken to protect the skin from liquid contact. Often, however, a cumbersome, whole-body protective suit is worn to protect against skin contact with vapor as well. To what extent it is actually necessary to protect skin from vapor penetration had not previously been demonstrated. In an attempt to answer this question, we conducted a study with rats to compare the dermal penetration of hydrazine vapor with inhalation. Pharmacokinetic modeling was used to compare body burdens resulting from these different routes of exposure. The analysis concluded that the vapor concentration during a skin-only exposure would have to be at least 200 times higher than that during inhalation to achieve the same body burden. This type of estimation illustrates the use of predictive toxicology in occupational exposures.

Establishing Quantitative Within-Subject Confidence Limits For Clinical Stereoroentgenographs

NASA Astrophysics Data System (ADS)

Korn, Edward L.; Baumrind, Sheldon; Chafetz, Neil; Curry, Sean; Moffitt, Francis

1983-07-01

It is now quite clear that under ideal conditions, discrete points can be located on x-ray films with standard deviations of less than 50 i. However, under routine clinical conditions, such considerations as individual variation in anatomy, movement of the subject between exposures, and variations in image quality combine to produce considerable reductions in the confidence which can be placed in quantitative assessments made from stereoroentgenographic films. This paper discusses some considerations involved in designing mathematical models in such a way as to optimize the use of imperfect data in answering specific clinical questions.

Metabolic Engineering for Advanced Biofuels Production and Recent Advances Toward Commercialization

DOE PAGES

Meadows, Corey W.; Kang, Aram; Lee, Taek S.

2017-07-21

Research on renewable biofuels produced by microorganisms has enjoyed considerable advances in academic and industrial settings. As the renewable ethanol market approaches maturity, the demand is rising for the commercialization of more energy-dense fuel targets. Many strategies implemented in recent years have considerably increased the diversity and number of fuel targets that can be produced by microorganisms. Moreover, strain optimization for some of these fuel targets has ultimately led to their production at industrial scale. In this review, we discuss recent metabolic engineering approaches for augmenting biofuel production derived from alcohols, isoprenoids, and fatty acids in several microorganisms. In addition,more » we discuss successful commercialization ventures for each class of biofuel targets.« less

Metabolic Engineering for Advanced Biofuels Production and Recent Advances Toward Commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meadows, Corey W.; Kang, Aram; Lee, Taek S.

Research on renewable biofuels produced by microorganisms has enjoyed considerable advances in academic and industrial settings. As the renewable ethanol market approaches maturity, the demand is rising for the commercialization of more energy-dense fuel targets. Many strategies implemented in recent years have considerably increased the diversity and number of fuel targets that can be produced by microorganisms. Moreover, strain optimization for some of these fuel targets has ultimately led to their production at industrial scale. In this review, we discuss recent metabolic engineering approaches for augmenting biofuel production derived from alcohols, isoprenoids, and fatty acids in several microorganisms. In addition,more » we discuss successful commercialization ventures for each class of biofuel targets.« less

Bat noseleaf model: echolocation function, design considerations, and experimental verification.

PubMed

Kuc, Roman

2011-05-01

This paper describes a possible bat noseleaf echolocation function that improves target elevation resolution. Bats with a protruding noseleaf can rotate the lancet to act as an acoustic mirror that reflects the nostril emission, modeled as a virtual nostril that produces a delayed emission. The cancellation of the nostril and virtual nostril components at a target produces a sharp spectral notch whose frequency location relates to target elevation. This notch can be observed directly from the swept-frequency emission waveform, suggesting cochlear processing capabilities. Physical acoustic principles indicate the design considerations and trade-offs that a bat can accomplish through noseleaf shape and emission characteristics. An experimental model verifies the analysis and exhibits an elevation versus notch frequency sensitivity of approximately 1°/kHz.

CHANGES IN QUALITY AND COMPOSITION PRODUCED IN WINE BY COBALT-60 GAMMA IRRADIATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singleton, V.L.

1963-06-01

Glass-bottled red port, white port, dry red table wine, and dry white table wine purged with nitrogen and airsaturated dry sherry material were irradiated with and sensory evaluation showed considerable changes after irradiation. The bottle glass changed from colorless to greenish-brown. The wines were under a small positive pressure when opened, both white and red wines were bleached, and odor and flavor were changed. Analytical results showed no changes in extract, ethanol, volatile esters, or volatile acid, but a slight increase in pH and decrease in total acidity upon irradiation. Changes in spectral absorption were great; absorbance diminished at everymore » wavelength, but not proportionately. All untreated wines showed a maximum at 265 to 85 m mu and a shoulder at about 320 m mu , and the red wines the typical maximum near 520 m mu , which was much decreased by irradiation. The absorbance at 320 m mu was greatly decreased and the shoulder disappeared, leaving only the residual absorption from the more intense but less affected peak at 265 to 85 m mu (absorption at these wavelengths is attributed largely to their content of flavonoid, polyphenolic substances). No appreciable change in the tannin (total polyphenolic) constant was seen, but paper chromatographic studies showed definite qualitative and quantitative changes in polyphenols The oxidation- reduction potential was greatly lowered by irradiation, and volatile substances reacting as aldehydes were produced in considerable amounts, confirming that definite, selective, and specific compositional changes are produced in wine by gamma irradiation at feasible dose levels. With wines flavor-rated by experienced judges with reference to standard wine types, large changes were produced by 500,000 and 1,000,000 rad. Grape aroma rating was significantly decreased in all cases by the higher levels of irradiation. A radiation-induced flavor seemed similar, regardless of the type of wine irradiated. Descriptive terms suggested by the panel for this flavor included cheesy, fishy, perfumy, leathery, sulfurish, fatty, metallic, aged-European-wine-like, whey-like, burned, mushroomy, and fruity. However, comments were favorable on the flavor and odor induced by high levels of radiation by 5 of the 14 panelists. The possibility of favorably influencing the quality of standard types of wine by irradiation near or below 100,000 rad seems worthy of further study, it was concluded. (BBB)« less

Children's Television Programming: Some Prior Considerations and Research Designs for Canadian Broadcasts.

ERIC Educational Resources Information Center

Solberg, Janet

This handbook was produced to address some of the questions raised at a workshop for producers, programmers, performers, researchers, and writers in the field of Canadian children's television. Three main areas are covered. The first section provides an indication of some of the information that research can supply for the improvement of…

The Disfluent Speech of Bilingual Spanish-English Children: Considerations for Differential Diagnosis of Stuttering

ERIC Educational Resources Information Center

Byrd, Courtney T.; Bedore, Lisa M.; Ramos, Daniel

2015-01-01

Purpose: The primary purpose of this study was to describe the frequency and types of speech disfluencies that are produced by bilingual Spanish-English (SE) speaking children who do not stutter. The secondary purpose was to determine whether their disfluent speech is mediated by language dominance and/or language produced. Method: Spanish and…

Thrombopoiesis. Capturing the unicorn.

PubMed

Groopman, J E

1994-11-01

The elusive factor that stimulates megakaryocytes to produce platelets has at last been found; as well as its physiological interest, this factor--thrombopoietin--may be of considerable therapeutic importance.

White LED sources for vehicle forward lighting

NASA Astrophysics Data System (ADS)

Van Derlofske, John F.; McColgan, Michele W.

2002-11-01

Considerations for the use of white light emitting diode (LED) sources to produce illumination for automotive forward lighting is presented. Due to their reliability, small size, lower consumption, and lower heat generation LEDs are a natural choice for automotive lighting systems. Currently, LEDs are being sucessfully employed in most vehicle lighting applications. In these applications the light levels, distributions, and colors needed are achievable by present LED technologies. However, for vehicle white light illumination applications LEDs are now only being considered for low light level applications, such as back-up lamps. This is due to the relatively low lumen output that has been available up to now in white LEDs. With the advent of new higher lumen packages, and with the promise of even higher light output in the near future, the use of white LEDs sources for all vehicle forward lighting applications is beginning to be considered. Through computer modeling and photometric evaluation this paper examines the possibilities of using currently available white LED technology for vehicle headlamps. It is apparent that optimal LED sources for vehicle forward lighting applications will be constructed with hereto undeveloped technology and packaging configurations. However, the intent here in exploring currently available products is to begin the discussion on the design possibilities and significant issues surrounding LEDs in order to aid in the design and development of future LED sources and systems. Considerations such as total light output, physical size, optical control, power consumption, color appearance, and the effects of white LED spectra on glare and peripheral vision are explored. Finally, conclusions of the feasibility of current LED technology being used in these applications and recommendations of technology advancements that may need to occur are made.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chenna, A.; Singer, B.

Benzene is a carcinogen in rodents and a cause of bone marrow toxicity and leukemia in humans. p-Benzoquinone (p-BQ) is one of the stable metabolites of benzene, as well as of a number of drugs and other chemicals. 2{prime}-Deoxycytidine (dC) and 2{prime}-deoxyadenosine (dA) were allowed to react with p-BQ in aqueous solution at pH 7.4 and 4.5. The yields were considerably higher at pH 4.5 than at pH 7.4 and 4.5. The yields were considerably higher at pH 4.5 than at pH 7.4, as indicated by HPLC analysis. The desired products were isolated by column chromatography on silica gel ormore » cellulose. Identification was done by FAB-MS, {sup 1}H NMR, and UV spectroscopy. The reaction of p-BQ with dC and dA at pH 4.5 produced the exocyclic compounds 3-hydroxy-1,N{sup 4}-benzetheno-2{prime}-deoxycytidine (p-BA-dC), and 9-hydroxy-1,N{sup 6}-benzetheno-2{prime}-deoxyadenosine (p-BQ-dA), respectively, in a large scale and high yield. These adducts have been previously made in a microgram scale as the 3{prime}-phosphate for {sup 32}P-postlabeling studies of their incidence in DNA. The p-BQ-dC and p-BQ-dA adducts have, in addition to the two hydroxyl groups of deoxyribose, one newly formed hydroxyl group a the C-3 or C-9 of the exocyclic base of each product respectively. Incorporation of these adducts into oligonucleotides as the phosphoramidite requires the protection of ll three hydroxyl groups in these compounds. The mass spectroscopic analysis of the DNA oligomers was confirmed by electrospray MS. These oligomers are now under investigation for their biochemical properties. 41 refs., 4 figs.« less

High-throughput metataxonomic characterization of the raw milk microbiota identifies changes reflecting lactation stage and storage conditions.

PubMed

Doyle, Conor J; Gleeson, David; O'Toole, Paul W; Cotter, Paul D

2017-08-16

Low temperature is used to control the growth of bacteria in milk, both pre- and post-pasteurization. As the duration of refrigerated storage extends, psychrotrophs dominate the milk microbiota, that can produce heat stable lipases which negatively impact the organoleptic qualities of milk. Here we examine the influence that refrigeration temperature (2°C, 4°C and 6°C) and storage duration (96h) have on the microbiota composition (16S profiling) of raw bulk tank milk (BTM). To reflect a proposed change to current farming practices, raw milk was blended after each milking (8 milkings) and stored for five consecutive days in each temperature-specific tank. Here 16S rRNA-based microbiota compositional analysis was performed after milk was collected on day 1 and again after the final addition of milk at day 5. In addition to assessing the impact of the duration and temperature of storage, the influence of lactation stage, i.e. mid- versus late-lactation, on the microbiota of the blended BTM was also examined. Overall, both temperature and length of storage had surprisingly little influence on the raw milk microbiota, other than an increase in proportions of Gammaproteobacteria in the blended milk samples collected after pooling on day 5, and in samples stored at 6°C. However, lactation stage had a considerable influence on microbiota composition, with milk from mid-lactation containing higher proportions of Bacteroides, Faecalibacterium, Campylobacter and Rhodanobacter, and late-lactation milk containing higher proportions of Actinobacteria. Overall, the study demonstrates that current temperature and storage duration practises impact the microbiota of raw milk, but these impacts are modest relative to the more considerable differences between mid and late-lactation milk. Copyright © 2017 Elsevier B.V. All rights reserved.

The quest for a general theory of aging and longevity.

PubMed

Gavrilov, Leonid A; Gavrilova, Natalia S

2003-07-16

Extensive studies of phenomena related to aging have produced many diverse findings, which require a general theoretical framework to be organized into a comprehensive body of knowledge. As demonstrated by the success of evolutionary theories of aging, quite general theoretical considerations can be very useful when applied to research on aging. In this theoretical study, we attempt to gain insight into aging by applying a general theory of systems failure known as reliability theory. Considerations of this theory lead to the following conclusions: (i) Redundancy is a concept of crucial importance for understanding aging, particularly the systemic nature of aging. Systems that are redundant in numbers of irreplaceable elements deteriorate (that is, age) over time, even if they are built of elements that do not themselves age. (ii) An apparent aging rate or expression of aging is higher for systems that have higher levels of redundancy. (iii) Redundancy exhaustion over the life course explains a number of observations about mortality, including mortality convergence at later life (when death rates are becoming relatively similar at advanced ages for different populations of the same species) as well as late-life mortality deceleration, leveling off, and mortality plateaus. (iv) Living organisms apparently contain a high load of initial damage from the early stages of development, and therefore their life span and aging patterns may be sensitive to early-life conditions that determine this initial damage load. Thus, the reliability theory provides a parsimonious explanation for many important aging-related phenomena and suggests a number of interesting testable predictions. We therefore suggest adding the reliability theory to the arsenal of methodological approaches applied to research on aging.

End-of-Life vehicle recovery in china: Consideration and innovation following the EU ELV directive

NASA Astrophysics Data System (ADS)

Chen, Ming; Zhang, Fan

2009-03-01

Implementation of the EU’s end-of-life vehicle (ELV) directive eight years ago had a profound influence on China’s automotive industry, leading to the consideration of concepts such as extended producer responsibility. It also provided some impetus for ELV recycling industry developments within China. This article provides insight into current thinking within China about ELV recycling as well as vehicle recovery activities.

Potential sources of microbial contamination in unpasteurized apple cider.

PubMed

Garcia, Luis; Henderson, John; Fabri, Martha; Oke, Moustapha

2006-01-01

A study was conducted to identify possible sources of microbial contamination and to assess the effect of good cleaning and sanitation practices on the microbial quality and safety of unpasteurized apple cider. Raw unwashed apples, washed apples, cleaning water, fresh cider, and finished cider samples were collected from five Ontario producers over 4 months and microbiologically tested. Total coliforms were found in 31, 71 and 38% of the unwashed apple, water, and washed apple samples, respectively. Escherichia coli was found in 40% of the water samples from one producer alone. The washing step was identified as a potential source of contamination, possibly due to water in the dump tanks seldom being refreshed, and because scrubbers, spray nozzles, and conveyors were not properly cleaned and sanitized. Higher total coliform counts (P < 0.0001) and prevalence (P < 0.0001) in fresh cider compared with those in unwashed apples and washed apples indicated considerable microbial buildup along the process, possibly explained by the lack of appropriate equipment sanitation procedures. Results showed that producers who had better sanitary practices in place had lower (P < 0.001) total coliform prevalence than the rest of the producers. Overall results show that good sanitation procedures are associated with improved microbial quality of fresh cider in terms of total coliforms and that operators who pasteurize and/or UV treat their product should still be required to have a sound good manufacturing practices program in place to prevent recontamination. Cryptosporidium parvum, an important pathogen for this industry, was found in different sample types, including washed apples, water, and fresh and finished cider.

The ethical aspects of regulating production.

PubMed

Swanson, J C

2008-02-01

Polls and surveys conducted within the United States show general agreement that there is public support for the protection of farm livestock and poultry. Concurrent with the growing public sentiment is the recent adoption of socially responsible corporate policies by major food retailers relative to animal welfare. The animal welfare assurance and audit programs developed by the private sector are an attempt to assure consumers that best practice measures and independent oversight result in a reasonable quality of life for food-producing animals. These programs represent voluntary self-regulation and arguably a market-based approach to secure the welfare of food-producing animals. Animal advocacy organizations historically seek regulatory oversight of animal care practice. Legislative routes that require government promulgation and enforcement of animal care regulations represent an involuntary form of animal welfare assurance. There are ethical considerations concerning the employment of voluntary or involuntary regulation of the welfare of food-producing animals. For example, degree of public endangerment, economic impact, viability of small to medium producers, food price, food quality, and food security are prominent among the ethical considerations in deliberating whether to impose regulatory mandates on production. In either regulatory approach, the public must be convinced that the welfare of food-producing animals can be secured in a transparent and convincing manner.

Investigation of bio-oil produced by hydrothermal liquefaction of food waste using ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry.

PubMed

Kostyukevich, Yury; Vlaskin, Mikhail; Borisova, Ludmila; Zherebker, Alexander; Perminova, Irina; Kononikhin, Alexey; Popov, Igor; Nikolaev, Eugene

2018-02-01

Recent research has revealed that more than 1.3 billion tons of food is wasted globally every year. The disposal of such huge biomass has become a challenge. In the present paper, we report the production of the bio-oil by hydrothermal liquefaction of three classes of food waste: meat, cheese and fruits. The highest yield of the bio-oil was observed for meat (∼60%) and cheese (∼75%), while for fruits, it was considerably low (∼10%). The molecular composition of the obtained bio-oil was investigated using ultrahigh resolution Fourier Transform Ion Cyclotron Resonance mass spectrometry and was found to be similar to that obtained from algae. Several thousand heteroatom compounds (N, N 2 , ON 2 , etc. classes) were reliably identified from each sample. It was found that bio-oils produced from meat and cheese have many compounds (∼90%) with common molecular formulas, while bio-oil produced from fruits differs considerably (∼30% of compounds are unique).

Global Expansion and English Language Learning

ERIC Educational Resources Information Center

Andrade, Maureen Snow

2016-01-01

Demand for higher education is global. As institutions extend opportunities beyond their borders, English language proficiency must be considered. This chapter focuses on considerations related to global expansion, with an emphasis on the role of distance English language courses and the distinct considerations in their development.

Characterization of putative virulence factors of Serratia marcescens strain SEN for pathogenesis in Spodoptera litura.

PubMed

Aggarwal, Chetana; Paul, Sangeeta; Tripathi, Vishwas; Paul, Bishwajeet; Khan, Md Aslam

2017-02-01

Two Serratia marcescens strains, SEN and ICC-4, isolated from diseased insect cadavers were observed to differ considerably in their virulence towards Spodoptera litura. The present study was aimed to characterize the possible virulence factors present in the virulent Serratia marcescens strain SEN. Both the S. marcescens strains were evaluated for the presence of various lytic enzymes such as chitinase, lipase, protease and phospholipase. The virulent S. marcescens strain SEN was observed to possess considerably higher activity of chitinase and protease enzymes; activity of phospholipase enzyme was also higher. Although, all the three toxin genes shlA, phlA and swr could be detected in both the S. marcescens strains, there was a higher expression of these genes in the virulent strain SEN. S. marcescens strain ICC-4 showed greater reduction in overall growth yield in the post-exponential phase in the presence of midgut juice and hemolymph of S. litura larvae, as compared to S. marcescens strain SEN. Proliferation of the S. marcescens strain SEN was also considerably higher in foregut, midgut and hemolymph of S. litura larvae, as compared to strain ICC-4. Peritrophic membrane treated with broth culture of the S. marcescens strain SEN showed higher damage as compared to strain ICC-4. The peritrophic membrane of larvae fed on diet treated with the virulent strain showed considerable damage while the peritrophic membrane of larvae fed on diet treated with the non-virulent strain showed no damage. This is the first report documenting the fate of ingested S. marcescens in S. litura gut and the relative expression of toxin genes from two S. marcescens strains differing in their virulence towards S. litura. Copyright © 2016 Elsevier Inc. All rights reserved.

Heavy rainfall in Mediterranean cyclones. Part I: contribution of deep convection and warm conveyor belt

NASA Astrophysics Data System (ADS)

Flaounas, Emmanouil; Kotroni, Vassiliki; Lagouvardos, Konstantinos; Gray, Suzanne L.; Rysman, Jean-François; Claud, Chantal

2018-04-01

In this study, we provide an insight to the role of deep convection (DC) and the warm conveyor belt (WCB) as leading processes to Mediterranean cyclones' heavy rainfall. To this end, we use reanalysis data, lighting and satellite observations to quantify the relative contribution of DC and the WCB to cyclone rainfall, as well as to analyse the spatial and temporal variability of these processes with respect to the cyclone centre and life cycle. Results for the period 2005-2015 show that the relationship between cyclone rainfall and intensity has high variability and demonstrate that even intense cyclones may produce low rainfall amounts. However, when considering rainfall averages for cyclone intensity bins, a linear relationship was found. We focus on the 500 most intense tracked cyclones (responsible for about 40-50% of the total 11-year Mediterranean rainfall) and distinguish between the ones producing high and low rainfall amounts. DC and the WCB are found to be the main cause of rainfall for the former (producing up to 70% of cyclone rainfall), while, for the latter, DC and the WCB play a secondary role (producing up to 50% of rainfall). Further analysis showed that rainfall due to DC tends to occur close to the cyclones' centre and to their eastern sides, while the WCBs tend to produce rainfall towards the northeast. In fact, about 30% of rainfall produced by DC overlaps with rainfall produced by WCBs but this represents only about 8% of rainfall produced by WCBs. This suggests that a considerable percentage of DC is associated with embedded convection in WCBs. Finally, DC was found to be able to produce higher rain rates than WCBs, exceeding 50 mm in 3-h accumulated rainfall compared to a maximum of the order of 40 mm for WCBs. Our results demonstrate in a climatological framework the relationship between cyclone intensity and processes that lead to heavy rainfall, one of the most prominent environmental risks in the Mediterranean. Therefore, we set perspectives for a deeper analysis of the favourable atmospheric conditions that yield high impact weather.

Method of particle trajectory recognition in particle flows of high particle concentration using a candidate trajectory tree process with variable search areas

DOEpatents

Shaffer, Franklin D.

2013-03-12

The application relates to particle trajectory recognition from a Centroid Population comprised of Centroids having an (x, y, t) or (x, y, f) coordinate. The method is applicable to visualization and measurement of particle flow fields of high particle. In one embodiment, the centroids are generated from particle images recorded on camera frames. The application encompasses digital computer systems and distribution mediums implementing the method disclosed and is particularly applicable to recognizing trajectories of particles in particle flows of high particle concentration. The method accomplishes trajectory recognition by forming Candidate Trajectory Trees and repeated searches at varying Search Velocities, such that initial search areas are set to a minimum size in order to recognize only the slowest, least accelerating particles which produce higher local concentrations. When a trajectory is recognized, the centroids in that trajectory are removed from consideration in future searches.

High-sensitivity acoustic sensors from nanofibre webs.

PubMed

Lang, Chenhong; Fang, Jian; Shao, Hao; Ding, Xin; Lin, Tong

2016-03-23

Considerable interest has been devoted to converting mechanical energy into electricity using polymer nanofibres. In particular, piezoelectric nanofibres produced by electrospinning have shown remarkable mechanical energy-to-electricity conversion ability. However, there is little data for the acoustic-to-electric conversion of electrospun nanofibres. Here we show that electrospun piezoelectric nanofibre webs have a strong acoustic-to-electric conversion ability. Using poly(vinylidene fluoride) as a model polymer and a sensor device that transfers sound directly to the nanofibre layer, we show that the sensor devices can detect low-frequency sound with a sensitivity as high as 266 mV Pa(-1). They can precisely distinguish sound waves in low to middle frequency region. These features make them especially suitable for noise detection. Our nanofibre device has more than five times higher sensitivity than a commercial piezoelectric poly(vinylidene fluoride) film device. Electrospun piezoelectric nanofibres may be useful for developing high-performance acoustic sensors.

High-sensitivity acoustic sensors from nanofibre webs

PubMed Central

Lang, Chenhong; Fang, Jian; Shao, Hao; Ding, Xin; Lin, Tong

2016-01-01

Considerable interest has been devoted to converting mechanical energy into electricity using polymer nanofibres. In particular, piezoelectric nanofibres produced by electrospinning have shown remarkable mechanical energy-to-electricity conversion ability. However, there is little data for the acoustic-to-electric conversion of electrospun nanofibres. Here we show that electrospun piezoelectric nanofibre webs have a strong acoustic-to-electric conversion ability. Using poly(vinylidene fluoride) as a model polymer and a sensor device that transfers sound directly to the nanofibre layer, we show that the sensor devices can detect low-frequency sound with a sensitivity as high as 266 mV Pa−1. They can precisely distinguish sound waves in low to middle frequency region. These features make them especially suitable for noise detection. Our nanofibre device has more than five times higher sensitivity than a commercial piezoelectric poly(vinylidene fluoride) film device. Electrospun piezoelectric nanofibres may be useful for developing high-performance acoustic sensors. PMID:27005010

Local mechanical response of cells to the controlled rotation of magnetic nanorods.

PubMed

Castillo, Matias; Ebensperger, Roberto; Wirtz, Denis; Walczak, Magdalena; Hurtado, Daniel E; Celedon, Alfredo

2014-11-01

The mechanical response of the cytoplasm was investigated by the intracellular implantation of magnetic nanorods and exposure to low-frequency rotatory magnetic fields. Nanorods (Pt-Ni, ∼200 nm diameter) fabricated by electrodeposition in templates of porous alumina with lengths of approximately 2 and 5 µm were inserted into NIH/3T3 fibroblasts and manipulated with a rotational magnetic field. Nanorod rotation was observed only for torques greater than 3.0 × 10(-16) Nm, suggesting a Bingham-type behavior of the cytoplasm. Higher torques produced considerable deformation of the intracellular material. The cell nucleus and cell membrane were significantly deformed by nanorods actuated by 4.5 × 10(-15) Nm torques. Our results demonstrate that nanorods under magnetic fields are an effective tool to mechanically probe the intracellular environment. We envision that our findings may contribute to the noninvasive and direct mechanical characterization of the cytoplasm. © 2014 Wiley Periodicals, Inc.

Local mechanical response of cells to the controlled rotation of magnetic nanorods

PubMed Central

Castillo, Matias; Ebensperger, Roberto; Wirtz, Denis; Walczak, Magdalena; Hurtado, Daniel E.; Celedon, Alfredo

2015-01-01

The mechanical response of the cytoplasm was investigated by the intracellular implantation of magnetic nanorods and exposure to low-frequency rotatory magnetic fields. Nanorods (Pt-Ni, ~200 nm diameter) fabricated by electrodeposition in templates of porous alumina with lengths of approximately 2 and 5 μm were inserted into NIH/ 3T3 fibroblasts and manipulated with a rotational magnetic field. Nanorod rotation was observed only for torques greater than 3.0 × 10−16 Nm, suggesting a Bingham-type behavior of the cytoplasm. Higher torques produced considerable deformation of the intracellular material. The cell nucleus and cell membrane were significantly deformed by nanorods actuated by 4.5 × 10−15 Nm torques. Our results demonstrate that nanorods under magnetic fields are an effective tool to mechanically probe the intracellular environment. We envision that our findings may contribute to the noninvasive and direct mechanical characterization of the cytoplasm. PMID:24700696

Image resolution enhancement via image restoration using neural network

NASA Astrophysics Data System (ADS)

Zhang, Shuangteng; Lu, Yihong

2011-04-01

Image super-resolution aims to obtain a high-quality image at a resolution that is higher than that of the original coarse one. This paper presents a new neural network-based method for image super-resolution. In this technique, the super-resolution is considered as an inverse problem. An observation model that closely follows the physical image acquisition process is established to solve the problem. Based on this model, a cost function is created and minimized by a Hopfield neural network to produce high-resolution images from the corresponding low-resolution ones. Not like some other single frame super-resolution techniques, this technique takes into consideration point spread function blurring as well as additive noise and therefore generates high-resolution images with more preserved or restored image details. Experimental results demonstrate that the high-resolution images obtained by this technique have a very high quality in terms of PSNR and visually look more pleasant.

Nitrogen dioxide exposures inside ice skating rinks.

PubMed Central

Brauer, M; Spengler, J D

1994-01-01

OBJECTIVES. The common operation of fuel-powered resurfacing equipment in enclosed ice skating rinks has the potential for producing high concentrations of carbon monoxide and nitrogen dioxide. Exposures to these gaseous combustion products may adversely affect the health of those inside the rink. Little information is available on pollutant concentrations under normal operating conditions. METHODS. One-week average nitrogen dioxide concentrations in 70 northeastern US rinks were measured with passive samplers during normal winter season conditions. RESULTS. The median nitrogen dioxide level inside rinks was 180 ppb, more than 10 times higher than the median outdoor concentration. One-week average nitrogen dioxide concentrations above 1000 ppb were measured in 10% of the rinks. CONCLUSIONS. Considering that short-term peak concentrations were likely to have reached two to five times the measured 1-week averages, our results suggest that nitrogen dioxide levels were well above short-term air quality guidelines and constitute a public health concern of considerable magnitude. PMID:8129060

Laser-driven electron acceleration in a plasma channel with an additional electric field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Li-Hong; Xue, Ju-Kui, E-mail: xuejk@nwnu.edu.cn; Liu, Jie, E-mail: liu-jie@iapcm.ac.cn

2016-05-15

We examine the electron acceleration in a two-dimensional plasma channel under the action of a laser field and an additional static electric field. We propose to design an appropriate additional electric field (its direction and location), in order to launch the electron onto an energetic trajectory. We find that the electron acceleration strongly depends on the coupled effects of the laser polarization, the direction, and location of the additional electric field. The additional electric field affects the electron dynamics by changing the dephasing rate. Particularly, a suitably designed additional electric field leads to a considerable energy gain from the lasermore » pulse after the interaction with the additional electric field. The electron energy gain from the laser with the additional electric field can be much higher than that without the additional electric field. This engineering provides a possible means for producing high energetic electrons.« less

What should be our approach to understanding the universe?

NASA Astrophysics Data System (ADS)

Chang, Hui-Yiing

2006-10-01

Besides understanding the concepts of physics and learning to apply them to different contexts, it is most crucial that students examine the basis of their beliefs in these theories. It becomes necessary, then, to expand our conception considerably beyond the scope of the physics textbook. This process is possibly effectuated by gaining a representative understanding of the liberal arts through study of several areas, and self-expression of one's convictions. Respecting of differences is important, as well as the expectation that proposing of new ideas is often accompanied by conflict and disequilibrium within individuals and the community. In this session, we will discuss the approaches of significant ancient scientists and philosophers to understanding the universe, and trace the development to modern conventionally accepted theories. A higher goal of physics education is to produce ``reforming physicists'' that unravel the truth for the betterment of society.

Unsteady jet flow computation towards noise prediction

NASA Technical Reports Server (NTRS)

Soh, Woo-Yung

1994-01-01

An attempt has been made to combine a wave solution method and an unsteady flow computation to produce an integrated aeroacoustic code to predict far-field jet noise. An axisymmetric subsonic jet is considered for this purpose. A fourth order space accurate Pade compact scheme is used for the unsteady Navier-Stokes solution. A Kirchhoff surface integral for the wave equation is employed through the use of an imaginary surface which is a circular cylinder enclosing the jet at a distance. Information such as pressure and its time and normal derivatives is provided on the surface. The sound prediction is performed side by side with the jet flow computation. Retarded time is also taken into consideration since the cylinder body is not acoustically compact. The far-field sound pressure has the directivity and spectra show that low frequency peaks shift toward higher frequency region as the observation angle increases from the jet flow axis.

Role of Tool Shoulder End Features on Friction Stir Weld Characteristics of 6082 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Mugada, Krishna Kishore; Adepu, Kumar

2018-03-01

Understanding the temperature generation around the tool shoulder contact is one of the important aspects of the friction stir welding process. In the present study, the effects of various tool shoulder end feature on the temperature and mechanical properties of the 6082 aluminum alloy were investigated. The experimental results show that the axial force during the welding is considerably reduced by using tools with shoulder end features. The detailed observation revealed that around the tool shoulder contact, the amount of heat generation is higher between trialing edge (TE) to retreating side-leading edge corner (RS-LE) counter clockwise direction and lower between RS-LE to TE clockwise direction. Out of the four shoulder end featured tools, the welds produced with ridges shoulder tool resulted in superior properties with significantly lower axial force (approximately 32%) compared to plane shoulder tool.

A new Ti-5Ag alloy for customized prostheses by three-dimensional printing (3DP).

PubMed

Hong, S B; Eliaz, N; Leisk, G G; Sach, E M; Latanision, R M; Allen, S M

2001-03-01

Three important considerations in the fabrication of customized cranio-maxillofacial prostheses are geometric precision, material strength, and biocompatibility. Three-dimensional printing (3DP) is a rapid part-fabrication process that can produce complex parts with high precision. The aim of this study was to design, synthesize by 3DP, and characterize a new Ti-5Ag (wt%) alloy. Silver nitrate was found to be an appropriate inorganic binder for the Ti powder-based skeleton, and the optimum sintering parameters for full densification were determined. The hardness of the Ti-5Ag alloy was shown to be much higher than that of a pure titanium sample. Potentiodynamic measurements, carried out in saline solution at body temperature, showed that the Ti-5Ag alloy had good passivation behavior, similar to that of pure titanium. It is concluded that the Ti-Ag system may be suitable for fabrication of customized prostheses by 3DP.

High energy X-ray phase and dark-field imaging using a random absorption mask.

PubMed

Wang, Hongchang; Kashyap, Yogesh; Cai, Biao; Sawhney, Kawal

2016-07-28

High energy X-ray imaging has unique advantage over conventional X-ray imaging, since it enables higher penetration into materials with significantly reduced radiation damage. However, the absorption contrast in high energy region is considerably low due to the reduced X-ray absorption cross section for most materials. Even though the X-ray phase and dark-field imaging techniques can provide substantially increased contrast and complementary information, fabricating dedicated optics for high energies still remain a challenge. To address this issue, we present an alternative X-ray imaging approach to produce transmission, phase and scattering signals at high X-ray energies by using a random absorption mask. Importantly, in addition to the synchrotron radiation source, this approach has been demonstrated for practical imaging application with a laboratory-based microfocus X-ray source. This new imaging method could be potentially useful for studying thick samples or heavy materials for advanced research in materials science.

Mass production of chemicals from biomass-derived oil by directly atmospheric distillation coupled with co-pyrolysis

NASA Astrophysics Data System (ADS)

Zhang, Xue-Song; Yang, Guang-Xi; Jiang, Hong; Liu, Wu-Jun; Ding, Hong-Sheng

2013-01-01

Production of renewable commodity chemicals from bio-oil derived from fast pyrolysis of biomass has received considerable interests, but hindered by the presence of innumerable components in bio-oil. In present work, we proposed and experimentally demonstrated an innovative approach combining atmospheric distillation of bio-oil with co-pyrolysis for mass production of renewable chemicals from biomass, in which no waste was produced. It was estimated that 51.86 wt.% of distillate just containing dozens of separable organic components could be recovered using this approach. Ten protogenetic and three epigenetic compounds in distillate were qualitatively identified by gas chromatography/mass spectrometry and quantified by gas chromatography. Among them, the recovery efficiencies of acetic acid, propanoic acid, and furfural were all higher than 80 wt.%. Formation pathways of the distillate components in this process were explored. This work opens up a fascinating prospect for mass production of chemical feedstock from waste biomass.

Errors in the estimation of approximate entropy and other recurrence-plot-derived indices due to the finite resolution of RR time series.

PubMed

García-González, Miguel A; Fernández-Chimeno, Mireya; Ramos-Castro, Juan

2009-02-01

An analysis of the errors due to the finite resolution of RR time series in the estimation of the approximate entropy (ApEn) is described. The quantification errors in the discrete RR time series produce considerable errors in the ApEn estimation (bias and variance) when the signal variability or the sampling frequency is low. Similar errors can be found in indices related to the quantification of recurrence plots. An easy way to calculate a figure of merit [the signal to resolution of the neighborhood ratio (SRN)] is proposed in order to predict when the bias in the indices could be high. When SRN is close to an integer value n, the bias is higher than when near n - 1/2 or n + 1/2. Moreover, if SRN is close to an integer value, the lower this value, the greater the bias is.

Experimental and theoretical investigation for the suppression of the plasma arc drop in the thermionic converter

NASA Technical Reports Server (NTRS)

Shaw, D. T.; Manikopoulos, C. N.; Chang, T.; Lee, C. H.; Chiu, N.

1977-01-01

Ion generation and recombination mechanisms in the cesium plasma as they pertain to the advanced mode thermionic energy converter were studied. The decay of highly ionized cesium plasma was studied in the near afterglow to examine the recombination processes. Very low recombination in such a plasma may prove to be of considerable importance in practical converters. The approaches of external cesium generation were vibrationally excited nitrogen as an energy source of ionization of cesium ion, and microwave power as a means of resonant sustenance of the cesium plasma. Experimental data obtained so far show that all three techniques - i.e., the non-LTE high-voltage pulsing, the energy transfer from vibrationally excited diatomic gases, and the external pumping with a microwave resonant cavity - can produce plasmas with their densities significantly higher than the Richardson density. The implication of these findings as related to Lam's theory is discussed.

Role of fish distribution on estimates of standing crop in a cooling reservoir

USGS Publications Warehouse

Barwick, D. Hugh

1984-01-01

Estimates of fish standing crop from coves in Keowee Reservoir, South Carolina, were obtained in May and August for 3 consecutive years. Estimates were significantly higher in May than in August for most of the major species of fish collected, suggesting that considerable numbers of fish had migrated from the coves by August. This change in fish distribution may have resulted from the operation of a 2,580-megawatt nuclear power plant which altered reservoir stratification. Because fish distribution is sensitive to conditions of reservoir stratification, and because power plants often alter reservoir stratification, annual cove sampling in August may not be sufficient to produce comparable estimates of fish standing crop on which to assess the impact of power plant operations on fish populations. Comparable estimates of fish standing crop can probably be obtained from cooling reservoirs by collecting annual samples at similar water temperatures and concentrations of dissolved oxygen.

Rheological properties and thermal conductivity of AlN-poly(propylene glycol) suspensions

NASA Astrophysics Data System (ADS)

Wozniak, Maciej; Rutkowski, Pawel; Kata, Dariusz

2016-01-01

Nanofluids have recently attracted researches' attention as a new generation of heat-transferring fluids used in heat exchangers and for energy storage. Also aluminium nitride is commonly known for its considerable heat conductivity, as high as 320 W/(m K). Because of that, the compound might be a preferable dispersed phase of heat-transferring fluids. This presented studies are focused on nano-AlN-poly(propylene glycol) dispersions which can be applied as potential cooling fluids. The rheological response of the suspensions on shearing and their thermal conductivity in the function of solids concentration and temperature were measured and discussed. The most desired result of the studies is to produce dispersions with Newtonian-like flow at increased temperature and at higher shear rate. All the aforementioned parameters conjugated with significant thermal conductivity of such nanofluids could predispose them to be used as effective cooling media.

Design considerations for a real-time ocular counterroll instrument

NASA Technical Reports Server (NTRS)

Hatamian, M.; Anderson, D. J.

1983-01-01

A real-time algorithm for measuring three-dimensional movement of the human eye, especially torsional movement, is presented. As its input, the system uses images of the eyeball taken at video rate. The amount of horizontal and vertical movement is extracted using a pupil tracking technique. The torsional movement is then measured by computing the discrete cross-correlation function between the circular samples of successive images of the iris patterns and searching for the position of the peak of the function. A local least square interpolation around the peak of the cross-correlation function is used to produce nearly unbiased estimates of torsion angle with accuracy of about 3-4 arcmin. Accuracies of better than 0.03 deg are achievable in torsional measurement with SNR higher than 36 dB. Horizontal and vertical rotations of up to + or - 13 deg can occur simultaneously with torsion without introducing any appreciable error in the counterrolling measurement process.

Metabolic engineering of Saccharomyces cerevisiae ethanol strains PE-2 and CAT-1 for efficient lignocellulosic fermentation.

PubMed

Romaní, Aloia; Pereira, Filipa; Johansson, Björn; Domingues, Lucília

2015-03-01

In this work, Saccharomyces cerevisiae strains PE-2 and CAT-1, commonly used in the Brazilian fuel ethanol industry, were engineered for xylose fermentation, where the first fermented xylose faster than the latter, but also produced considerable amounts of xylitol. An engineered PE-2 strain (MEC1121) efficiently consumed xylose in presence of inhibitors both in synthetic and corn-cob hydrolysates. Interestingly, the S. cerevisiae MEC1121 consumed xylose and glucose simultaneously, while a CEN.PK based strain consumed glucose and xylose sequentially. Deletion of the aldose reductase GRE3 lowered xylitol production to undetectable levels and increased xylose consumption rate which led to higher final ethanol concentrations. Fermentation of corn-cob hydrolysate using this strain, MEC1133, resulted in an ethanol yield of 0.47 g/g of total sugars which is 92% of the theoretical yield. Copyright © 2014 Elsevier Ltd. All rights reserved.

Growing Super-Dwarf wheat in Space Station Mir

NASA Technical Reports Server (NTRS)

Salisbury, F. B.

1997-01-01

Super-Dwarf wheat plants were grown in the Russian/Bulgarian growth chamber called Svet (means light in Russian), in Space Station Mir, from August 12 to November 9, 1995 (90 days) and from August 5 to December 6, 1996 (123 days); a second 1996 crop grew from December 6, 1996 to January 14, 1997 (39 days). Environmental monitoring instrumentation was built at Utah State University and added to Svet for the experiments. That instrumentation functioned well in 1995, but four of six lamp sets (two lamps in each set) failed, as did the controller and a fan. Plants stayed alive but were mostly vegetative (contrary to ground controls under equivalent photon flux). New, higher intensity lamps and other equipment functioned well during 1996, and plants grew surprisingly well, producing about 280 heads and considerable biomass, but the heads were all sterile. A strong case can be made that the sterility was caused by high ethylene in the cabin atmosphere.

Air Entrapment for Liquid Drops Impacting a Solid Substrate

NASA Astrophysics Data System (ADS)

Liu, Yuan; Tan, Peng; Xu, Lei

2012-11-01

Using high-speed photography coupled with optical interference, we experimentally study the air entrapment during a liquid drop impacting a solid substrate. We observe the formation of a compressed air film before the liquid touches the substrate, with internal pressure considerably higher than the atmospheric value. The degree of compression highly depends on the impact velocity, as explained by balancing the liquid deceleration with the large pressure of compressed air. After contact, the air film expands vertically at the edge, reducing its pressure within a few tens of microseconds and producing a thick rim on the perimeter. This thick-rimmed air film subsequently contracts into an air bubble, governed by the complex interaction between surface tension, inertia and viscous drag. Such a process is universally observed for impacts above a few centimeters high. Hong Kong GRF grant CUHK404211 and direct grant 2060418.

Widening Access to Higher Education--The Limits of Positive Action

ERIC Educational Resources Information Center

Saunders, Nick

2004-01-01

2003 was a tempestuous year for the formulation of higher education policy. After considerable delay, the White Paper "The Future of Higher Education" was published in January and this appeared to give a clear signal that government expected higher education institutions, particularly the pre-1992 universities, to do significantly more…

Laboratory arc furnace features interchangeable hearths

NASA Technical Reports Server (NTRS)

Armstrong, J. L.; Kruger, O. L.

1967-01-01

Laboratory arc furnace using rapidly interchangeable hearths gains considerable versatility in casting so that buttons or special shaped castings can be produced. It features a sight glass for observation.

A site for sori: Ecophysiology of fertile-sterile leaf dimorphy in ferns.

PubMed

Watkins, James E; Churchill, Amber C; Holbrook, N Michele

2016-05-01

Reproduction often requires significant investment and can move resources away from growth and maintenance; maintaining a balance between reproduction and growth can involve trade-offs. Extreme functional specialization has separated reproduction and photosynthesis in most seed plants, yet ferns use the laminar surface of their fronds for both reproduction and photosynthesis. This dual function selects for a variety of frond morphologies that range from no specialization (monomorphy) to extreme dimorphy between fertile and sterile fronds (holodimorphy). Here we examined the ecological and physiological consequences of variation in frond dimorphy in ferns, evaluated reproductive trade-offs across a dimorphy gradient, and speculate on factors controlling the occurrence of holodimorphy. Ecophysiological measurements of photosynthetic rate, water potential, hydraulic conductivity, and gross morphological comparisons of frond area and angle were used to evaluate differences between fertile and sterile fronds. We examined three temperate and three tropical fern species that vary in degree of fertile-sterile dimorphy. Holodimorphic species produced fewer fertile fronds, which had significantly higher respiratory rates than in sterile fronds on the same plant or in any frond produced on monomorphic species; hemidimorphic species were frequently intermediate. We found no differences in vulnerability to cavitation between fertile and sterile fronds. In dimorphic species, fertile fronds had higher (less negative) water potential and lower stipe hydraulic conductivity relative than in sterile fronds. Fertile-sterile dimorphy in ferns appears to come at considerable carbon cost in holodimorohic species. It is possible that the relative costs of this reproductive system are offset by increased spore dispersal, yet such trade-offs require further exploration. © 2016 Botanical Society of America.

Exposure to electromagnetic fields from laptop use of "laptop" computers.

PubMed

Bellieni, C V; Pinto, I; Bogi, A; Zoppetti, N; Andreuccetti, D; Buonocore, G

2012-01-01

Portable computers are often used at tight contact with the body and therefore are called "laptop." The authors measured electromagnetic fields (EMFs) laptop computers produce and estimated the induced currents in the body, to assess the safety of laptop computers. The authors evaluated 5 commonly used laptop of different brands. They measured EMF exposure produced and, using validated computerized models, the authors exploited the data of one of the laptop computers (LTCs) to estimate the magnetic flux exposure of the user and of the fetus in the womb, when the laptop is used at close contact with the woman's womb. In the LTCs analyzed, EMF values (range 1.8-6 μT) are within International Commission on Non-Ionizing Radiation (NIR) Protection (ICNIRP) guidelines, but are considerably higher than the values recommended by 2 recent guidelines for computer monitors magnetic field emissions, MPR II (Swedish Board for Technical Accreditation) and TCO (Swedish Confederation of Professional Employees), and those considered risky for tumor development. When close to the body, the laptop induces currents that are within 34.2% to 49.8% ICNIRP recommendations, but not negligible, to the adult's body and to the fetus (in pregnant women). On the contrary, the power supply induces strong intracorporal electric current densities in the fetus and in the adult subject, which are respectively 182-263% and 71-483% higher than ICNIRP 98 basic restriction recommended to prevent adverse health effects. Laptop is paradoxically an improper site for the use of a LTC, which consequently should be renamed to not induce customers towards an improper use.

Discordant prostate specific antigen test results despite WHO assay standardization.

PubMed

Boegemann, Martin; Arsov, Christian; Hadaschik, Boris; Herkommer, Kathleen; Imkamp, Florian; Nofer, Jerzy-Roch; Gerß, Joachim; Albers, Peter; Semjonow, Axel

2018-05-01

Total PSA (tPSA) and free PSA (fPSA) are the most commonly used biomarkers for early detection of prostate cancer. Despite standardization efforts, many available PSA assays may still produce discordant results. In the present study, we compared four PSA assays calibrated to the WHO standards 96/670 and 96/668 for tPSA and fPSA, respectively. Within the scope of the Prostate Cancer Early Detection Study Based on a ''Baseline'' PSA Value in Young Men (PROBASE), we tested tPSA and fPSA in serum samples from 50 patients in the four different PROBASE sites using four WHO-calibrated assays from Roche (Elecsys, Cobas), Beckman-Coulter (Access-II) and Siemens (ADVIA Centaur). The comparison was performed using the Passing-Bablok regression method. Compared to Access, the median tPSA levels for Centaur, Elecsys, and Cobas were +3%, +11%-20%, and +17%-23%, respectively, while for median fPSA levels the differences for Centaur, Elecsys, and Cobas were +49%, +29%-31%, and +22%, respectively. Despite all investigated assays being WHO-calibrated, the Elecsys and Cobas tPSA assays produced considerably higher results than the Access and Centaur assays. Differences in fPSA-recovery between all investigated assays were even more pronounced. When applying the tPSA cutoff of 3.1 μg/L recommended for WHO-calibrated assays, the use of higher calibrated assays may lead to unnecessary prostate biopsies. Conversely, if the historical threshold of 4 μg/L is applied when using WHO-calibrated assays, it could lead to falsely omitted prostate biopsies.

Improved ethanol production by engineered Saccharomyces cerevisiae expressing a mutated cellobiose transporter during simultaneous saccharification and fermentation.

PubMed

Lee, Won-Heong; Jin, Yong-Su

2017-03-10

Although simultaneous saccharification and fermentation (SSF) of cellulosic biomass can offer efficient hydrolysis of cellulose through alleviating feed-back inhibition of cellulases by glucose, supplementation of β-glucosidase is necessary because most fermenting microorganisms cannot utilize cellobiose. Previously, we observed that SSF of cellulose by an engineered Saccharomyces cerevisiae expressing a cellobiose transporter (CDT-1) and an intracellular β-glucosidase (GH1-1) without β-glucosidase could not be performed as efficiently as the traditional SSF with extracellular β-glucosidase. However, we improved the ethanol production from SSF of cellulose by employing a further engineered S. cerevisiae expressing a mutant cellobiose transporter [CDT-1 (F213L) exhibiting higher V MAX than CDT-1] and GH1-1 in this study. Furthermore, limitation of cellobiose formation by reducing the amounts of cellulases mixture in SSF could lead the further engineered strain to produce ethanol considerably better than the parental strain with β-glucosidase. Probably, better production of ethanol by the further engineered strain seemed to be due to a higher affinity to cellobiose, which might be attributed to not only 2-times lower Monod constant (K S ) for cellobiose than K S of the parental strain for glucose but also 5-times lower K S than Michaelis-Menten constant (K M ) of the extracellular β-glucosidase for glucose. Our results suggest that modification of the cellobiose transporter in the engineered yeast to transport lower level of cellobiose enables a more efficient SSF for producing ethanol from cellulose. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative advantage: the impact of ISO 14001 environmental certification on exports.

PubMed

Bellesi, Florencia; Lehrer, David; Tal, Alon

2005-04-01

Relative to the enormous acceptance of the ISO 9000 quality standard, the ISO 14001 environmental management certification has been met with only moderate enthusiasm among industrial facilities. The literature on corporate motivation for ISO 14001 participation is relatively modest considering the enormous number of publications reviewing other aspects of its adoption and implementation. It would seem that the present "marketing" package supporting ISO environmental commitments does not seem to offer sufficiently persuasive incentives for increased sales, either domestically or internationally. While researchers assume that a higher export rate of companies is positively associated with higher ISO participation rates, there have been very few empirical studies that support this inference, and conclusions have not been based on data taken from importing countries orfrom a systematic evaluation of expressed corporate preference for products sold by ISO 14001 certified companies. The present study reports the results of a survey to firms in six countries that are Israel's leading trade partners, importing chemicals, textiles, and produce. The survey results confirm that while the international market still considers price and quality as the paramount factors in selection of suppliers, environmental management systems (EMS) are an important feature that is frequently taken into consideration. EMS certification appears to signify a supplier who is managing the business well and exhibiting ethical responsibility. The European market proved to be more environmentally conscious than those in other industrialized parts of the world. EMS offer a particularly valuable advantage for producers wishing to reach European markets. As policy-makers seek to expand the voluntary adoption of EMS, a clear advantage for exporters should be highlighted among national industries.

Approaches to Analyzing the Outcomes of International Scholarship Programs for Higher Education

ERIC Educational Resources Information Center

Mawer, Matt

2017-01-01

International scholarship programs for higher education attract a substantial body of funding each year from national governments, supranational bodies, large charitable foundations, higher education institutions, and many smaller organizations. With aims variously shaped by international development and public diplomacy considerations,…

Separating method factors and higher order traits of the Big Five: a meta-analytic multitrait-multimethod approach.

PubMed

Chang, Luye; Connelly, Brian S; Geeza, Alexis A

2012-02-01

Though most personality researchers now recognize that ratings of the Big Five are not orthogonal, the field has been divided about whether these trait intercorrelations are substantive (i.e., driven by higher order factors) or artifactual (i.e., driven by correlated measurement error). We used a meta-analytic multitrait-multirater study to estimate trait correlations after common method variance was controlled. Our results indicated that common method variance substantially inflates trait correlations, and, once controlled, correlations among the Big Five became relatively modest. We then evaluated whether two different theories of higher order factors could account for the pattern of Big Five trait correlations. Our results did not support Rushton and colleagues' (Rushton & Irwing, 2008; Rushton et al., 2009) proposed general factor of personality, but Digman's (1997) α and β metatraits (relabeled by DeYoung, Peterson, and Higgins (2002) as Stability and Plasticity, respectively) produced viable fit. However, our models showed considerable overlap between Stability and Emotional Stability and between Plasticity and Extraversion, raising the question of whether these metatraits are redundant with their dominant Big Five traits. This pattern of findings was robust when we included only studies whose observers were intimately acquainted with targets. Our results underscore the importance of using a multirater approach to studying personality and the need to separate the causes and outcomes of higher order metatraits from those of the Big Five. We discussed the implications of these findings for the array of research fields in which personality is studied.

Depolymerization degree of water-extractable arabinoxylans in rye bread: characteristics of inbred lines used for breeding of bread cultivars.

PubMed

Cyran, Malgorzata R; Ceglińska, Alicja; Kolasińska, Irena

2012-09-05

The water-extractable arabinoxylans (WE AXs) present in rye bread govern its viscous properties, which may be related to reduced risk of cardiovascular diseases and diabetes. Breads made from rye cultivars generally exhibit higher AX-dependent extract viscosities (Cyran, M. R.; Saulnier, L. Food Chemistry2012, 131, 667-676) when compared with those produced from inbred lines used for their breeding. To give further details about this trend, the WE AXs were isolated from breads of lines and structurally characterized by HPSEC and (1)H NMR spectroscopy. The extract viscosities of endosperm and whole-meal breads were usually comparable, in contrast to those made from rye cultivars with higher viscosity of endosperm bread. The WE AXs present in breads obtained from inbred lines were characterized by the higher degradation degrees than those in breads from cultivars, as indicated by their HPSEC-RI profiles. This was associated with considerably lower proportions of 2-Xylp in their backbones. Besides, a level of endoxylanase activity in flours from inbred lines was much higher than that in flours from cultivars. Breeding of hybrid rye cultivars for production of high-viscosity bread requires the proper components. They may be preliminarily selected from populations with high WE AX contents and relatively low levels of endoxylanase activity by using the overall viscosity test for starting flours. However, further measurement of AX-dependent extract viscosity in test breads made from such lines may verify their usefulness completely.

Decomposing variation in dairy profitability: the impact of output, inputs, prices, labour and management.

PubMed

Wilson, P

2011-08-01

The UK dairy sector has undergone considerable structural change in recent years, with a decrease in the number of producers accompanied by an increased average herd size and increased concentrate use and milk yields. One of the key drivers to producers remaining in the industry is the profitability of their herds. The current paper adopts a holistic approach to decomposing the variation in dairy profitability through an analysis of net margin data explained by physical input-output measures, milk price variation, labour utilization and managerial behaviours and characteristics. Data are drawn from the Farm Business Survey (FBS) for England in 2007/08 for 228 dairy enterprises. Average yields are 7100 litres/cow/yr, from a herd size of 110 cows that use 0·56 forage ha/cow/yr and 43·2 labour h/cow/yr. An average milk price of 22·57 pence per litre (ppl) produced milk output of £1602/cow/yr, which after accounting for calf sales, herd replacements and quota leasing costs, gave an average dairy output of £1516/cow/yr. After total costs of £1464/cow/yr this left an economic return of £52/cow/yr (0·73 ppl) net margin profit. There is wide variation in performance, with the most profitable (as measured by net margin per cow) quartile of producers achieving 2000 litres/cow/yr more than the least profitable quartile, returning a net margin of £335/cow/yr compared to a loss of £361/cow/yr for the least profitable. The most profitable producers operate larger, higher yielding herds and achieve a greater milk price for their output. In addition, a significantly greater number of the most profitable producers undertake financial benchmarking within their businesses and operate specialist dairy farms. When examining the full data set, the most profitable enterprises included significantly greater numbers of organic producers. The most profitable tend to have a greater reliance on independent technical advice, but this finding is not statistically significant. Decomposing the variation in net margin performance between the most and least profitable groups, an approximate ratio of 65:23:12 is observed for higher yields: lower costs: higher milk price. This result indicates that yield differentials are the key performance driver in dairy profitability. Lower costs per cow are dominated by the significantly lower cost of farmer and spouse labour per cow of the most profitable group, flowing directly from the upper quartile expending 37·7 labour h/cow/yr in comparison with 58·8 h/cow/yr for the lower quartile. The upper quartile's greater milk price is argued to be achieved through contract negotiations and higher milk quality, and this accounts for 0·12 of the variation in net margin performance. The average economic return to the sample of dairy enterprises in this survey year was less than £6000/farm/yr. However, the most profitable quartile returned an average economic return of approximately £50 000 per farm/yr. Structural change in the UK dairy sector is likely to continue with the least profitable and typically smaller dairy enterprises being replaced by a smaller number of expanding dairy production units.

Decomposing variation in dairy profitability: the impact of output, inputs, prices, labour and management

PubMed Central

WILSON, P.

2011-01-01

SUMMARY The UK dairy sector has undergone considerable structural change in recent years, with a decrease in the number of producers accompanied by an increased average herd size and increased concentrate use and milk yields. One of the key drivers to producers remaining in the industry is the profitability of their herds. The current paper adopts a holistic approach to decomposing the variation in dairy profitability through an analysis of net margin data explained by physical input–output measures, milk price variation, labour utilization and managerial behaviours and characteristics. Data are drawn from the Farm Business Survey (FBS) for England in 2007/08 for 228 dairy enterprises. Average yields are 7100 litres/cow/yr, from a herd size of 110 cows that use 0·56 forage ha/cow/yr and 43·2 labour h/cow/yr. An average milk price of 22·57 pence per litre (ppl) produced milk output of £1602/cow/yr, which after accounting for calf sales, herd replacements and quota leasing costs, gave an average dairy output of £1516/cow/yr. After total costs of £1464/cow/yr this left an economic return of £52/cow/yr (0·73 ppl) net margin profit. There is wide variation in performance, with the most profitable (as measured by net margin per cow) quartile of producers achieving 2000 litres/cow/yr more than the least profitable quartile, returning a net margin of £335/cow/yr compared to a loss of £361/cow/yr for the least profitable. The most profitable producers operate larger, higher yielding herds and achieve a greater milk price for their output. In addition, a significantly greater number of the most profitable producers undertake financial benchmarking within their businesses and operate specialist dairy farms. When examining the full data set, the most profitable enterprises included significantly greater numbers of organic producers. The most profitable tend to have a greater reliance on independent technical advice, but this finding is not statistically significant. Decomposing the variation in net margin performance between the most and least profitable groups, an approximate ratio of 65:23:12 is observed for higher yields: lower costs: higher milk price. This result indicates that yield differentials are the key performance driver in dairy profitability. Lower costs per cow are dominated by the significantly lower cost of farmer and spouse labour per cow of the most profitable group, flowing directly from the upper quartile expending 37·7 labour h/cow/yr in comparison with 58·8 h/cow/yr for the lower quartile. The upper quartile's greater milk price is argued to be achieved through contract negotiations and higher milk quality, and this accounts for 0·12 of the variation in net margin performance. The average economic return to the sample of dairy enterprises in this survey year was less than £6000/farm/yr. However, the most profitable quartile returned an average economic return of approximately £50 000 per farm/yr. Structural change in the UK dairy sector is likely to continue with the least profitable and typically smaller dairy enterprises being replaced by a smaller number of expanding dairy production units. PMID:22505774

Production of ultrasonic vocalizations by Peromyscus mice in the wild

PubMed Central

Kalcounis-Rueppell, Matina C; Metheny, Jackie D; Vonhof, Maarten J

2006-01-01

Background There has been considerable research on rodent ultrasound in the laboratory and these sounds have been well quantified and characterized. Despite the value of research on ultrasound produced by mice in the lab, it is unclear if, and when, these sounds are produced in the wild, and how they function in natural habitats. Results We have made the first recordings of ultrasonic vocalizations produced by two free-living species of mice in the genus Peromyscus (P. californicus and P. boylii) on long term study grids in California. Over 6 nights, we recorded 65 unique ultrasonic vocalization phrases from Peromyscus. The ultrasonic vocalizations we recorded represent 7 different motifs. Within each motif, there was considerable variation in the acoustic characteristics suggesting individual and contextual variation in the production of ultrasound by these species. Conclusion The discovery of the production of ultrasonic vocalizations by Peromyscus in the wild highlights an underappreciated component in the behavior of these model organisms. The ability to examine the production of ultrasonic vocalizations in the wild offers excellent opportunities to test hypotheses regarding the function of ultrasound produced by rodents in a natural context. PMID:16507093

Selection of medical students according to their moral orientation.

PubMed

Bore, Miles; Munro, Don; Kerridge, Ian; Powis, David

2005-03-01

Consideration has been given to the use of tests of moral reasoning in the selection procedure for medical students. We argue that moral orientation, rather than moral reasoning, might be more efficacious in minimising the likelihood of inappropriate ethical behaviour in medicine. A conceptualisation and measure of moral orientation are presented, together with findings from 11 samples of medical school applicants and students. To provide empirical evidence for the reliability and validity of a measure of moral orientation and to explore gender, age, cultural and educational influences on moral orientation. A questionnaire designed to measure a libertarian-dual-communitarian dimension of moral orientation was completed by 7864 medical school applicants and students in Australia, Israel, Fiji, New Zealand, Scotland and England and by 84 Australian psychology students between 1997 and 2001. Older respondents produced marginally higher (more communitarian) moral orientation scores, as did women compared to men. Minor but significant (P <0.05) cultural differences were found. The Israeli samples produced higher mean moral orientation scores, while the Australian psychology student sample produced a lower (more libertarian) mean score relative to all other samples. No significant change in moral orientation score was observed after 1 year in a sample of Australian medical school students (n=59), although some differences observed between 5 cohorts of Australian medical students (Years 1-5; n=234) did reach significance. Moral orientation scores were found to be significantly correlated with a number of personality measures, providing evidence of construct validity. In all samples moral orientation significantly predicted the moral decisions made in response to the hypothetical dilemmas embedded in the measurement instrument. Discussion The results provide support for the conceptualisation of a libertarian-dual-communitarian dimension of moral orientation and demonstrate the psychometric properties of the measurement instrument. A number of questions concerning the use of such tests in selection procedures are considered.

Rivastigmine reduces "Likely to use methamphetamine" in methamphetamine-dependent volunteers.

PubMed

De La Garza, R; Newton, T F; Haile, C N; Yoon, J H; Nerumalla, C S; Mahoney, J J; Aziziyeh, A

2012-04-27

We previously reported that treatment with the cholinesterase inhibitor rivastigmine (3mg, PO for 5days) significantly attenuated "Desire for METH". Given that higher dosages of rivastigmine produce greater increases in synaptic ACh, we predicted that 6mg should have more pronounced effects on craving and other subjective measures. In the current study, we sought to characterize the effects of short-term exposure to rivastigmine (0, 3 or 6mg) on the subjective and reinforcing effects produced by administration of methamphetamine (METH) in non-treatment-seeking, METH-dependent volunteers. This was a double-blind, placebo-controlled, crossover study. Participants received METH on day 1, and were then randomized to placebo or rivastigmine on day 2 in the morning and treatment continued through day 8. METH dosing was repeated on day 6. The data indicate that METH (15 and 30mg), but not saline, increased several positive subjective effects, including "Any Drug Effect", "High", "Stimulated", "Desire METH", and "Likely to Use METH" (all p's<0.0001). In addition, during self-administration sessions, participants were significantly more likely to choose METH over saline (p<0.0001). Evaluating outcomes as peak effects, there was a trend for rivastigmine to reduce "Desire METH" (p=0.27), and rivastigmine significantly attenuated "Likely to Use METH" (p=0.01). These effects were most prominent for rivastigmine 6mg when participants were exposed to the low dose (15mg, IV), but not high dose (30mg, IV), of METH. The self-administration data reveal that rivastigmine did not alter total choices for METH (5mg, IV/choice). Overall, the results indicate some efficacy for rivastigmine in attenuating key subjective effects produced by METH, though additional research using higher doses and longer treatment periods is likely needed. These data extend previous findings and indicate that cholinesterase inhibitors, and other drugs that target acetylcholine systems, warrant continued consideration as treatments for METH dependence. Copyright © 2011 Elsevier Inc. All rights reserved.

Rivastigmine Reduces “Likely to Use Methamphetamine” in Methamphetamine-Dependent Volunteers

PubMed Central

De La Garza, R.; Newton, T.F.; Haile, C.N.; Yoon, J.H.; Nerumalla, C.S.; Mahoney, J.J.; Aziziyeh, A.

2012-01-01

We previously reported that treatment with the cholinesterase inhibitor rivastigmine (3 mg, PO for 5 days) significantly attenuated “Desire for METH”. Given that higher dosages of rivastigmine produce greater increases in synaptic ACh, we predicted that 6 mg should have more pronounced effects on craving and other subjective measures. In the current study, we sought to characterize the effects of short-term exposure to rivastigmine (0, 3 or 6 mg) on the subjective and reinforcing effects produced by administration of methamphetamine (METH) in non-treatment-seeking, METH-dependent volunteers. This was a double-blind, placebo-controlled, crossover study. Participants received METH on day 1, and were then randomized to placebo or rivastigmine on day 2 in the morning and treatment continued through day 8. METH dosing was repeated on day 6. The data indicate that METH (15 and 30 mg), but not saline, increased several positive subjective effects, including “Any Drug Effect”, “High”, “Stimulated”, “Desire METH”, and “Likely to Use METH” (all p’s<0.0001). In addition, during self-administration sessions, participants were significantly more likely to choose METH over saline (p<0.0001). Evaluating outcomes as peak effects, there was a trend for rivastigmine to reduce “Desire METH” (p=0.27), and rivastigmine significantly attenuated “Likely to Use METH” (p=0.01). These effects were most prominent for rivastigmine 6 mg when participants were exposed to the low dose (15 mg, IV), but not high dose (30 mg, IV), of METH. The self-administration data reveal that rivastigmine did not alter total choices for METH (5 mg, IV/choice). Overall, the results indicate some efficacy for rivastigmine in attenuating key subjective effects produced by METH, though additional research using higher doses and longer treatment periods is likely needed. These data extend previous findings and indicate that cholinesterase inhibitors, and other drugs that target acetylcholine systems, warrant continued consideration as treatments for METH dependence. PMID:22230648

Three-dimensional dominant frequency mapping using autoregressive spectral analysis of atrial electrograms of patients in persistent atrial fibrillation.

PubMed

Salinet, João L; Masca, Nicholas; Stafford, Peter J; Ng, G André; Schlindwein, Fernando S

2016-03-08

Areas with high frequency activity within the atrium are thought to be 'drivers' of the rhythm in patients with atrial fibrillation (AF) and ablation of these areas seems to be an effective therapy in eliminating DF gradient and restoring sinus rhythm. Clinical groups have applied the traditional FFT-based approach to generate the three-dimensional dominant frequency (3D DF) maps during electrophysiology (EP) procedures but literature is restricted on using alternative spectral estimation techniques that can have a better frequency resolution that FFT-based spectral estimation. Autoregressive (AR) model-based spectral estimation techniques, with emphasis on selection of appropriate sampling rate and AR model order, were implemented to generate high-density 3D DF maps of atrial electrograms (AEGs) in persistent atrial fibrillation (persAF). For each patient, 2048 simultaneous AEGs were recorded for 20.478 s-long segments in the left atrium (LA) and exported for analysis, together with their anatomical locations. After the DFs were identified using AR-based spectral estimation, they were colour coded to produce sequential 3D DF maps. These maps were systematically compared with maps found using the Fourier-based approach. 3D DF maps can be obtained using AR-based spectral estimation after AEGs downsampling (DS) and the resulting maps are very similar to those obtained using FFT-based spectral estimation (mean 90.23 %). There were no significant differences between AR techniques (p = 0.62). The processing time for AR-based approach was considerably shorter (from 5.44 to 5.05 s) when lower sampling frequencies and model order values were used. Higher levels of DS presented higher rates of DF agreement (sampling frequency of 37.5 Hz). We have demonstrated the feasibility of using AR spectral estimation methods for producing 3D DF maps and characterised their differences to the maps produced using the FFT technique, offering an alternative approach for 3D DF computation in human persAF studies.

Termites Facilitate Methane Oxidation and Shape the Methanotrophic Community

PubMed Central

Erens, Hans; Mujinya, Basile Bazirake; Boeckx, Pascal; Baert, Geert; Schneider, Bellinda; Frenzel, Peter; Van Ranst, Eric

2013-01-01

Termite-derived methane contributes 3 to 4% to the total methane budget globally. Termites are not known to harbor methane-oxidizing microorganisms (methanotrophs). However, a considerable fraction of the methane produced can be consumed by methanotrophs that inhabit the mound material, yet the methanotroph ecology in these environments is virtually unknown. The potential for methane oxidation was determined using slurry incubations under conditions with high (12%) and in situ (∼0.004%) methane concentrations through a vertical profile of a termite (Macrotermes falciger) mound and a reference soil. Interestingly, the mound material showed higher methanotrophic activity. The methanotroph community structure was determined by means of a pmoA-based diagnostic microarray. Although the methanotrophs in the mound were derived from populations in the reference soil, it appears that termite activity selected for a distinct community. Applying an indicator species analysis revealed that putative atmospheric methane oxidizers (high-indicator-value probes specific for the JR3 cluster) were indicative of the active nest area, whereas methanotrophs belonging to both type I and type II were indicative of the reference soil. We conclude that termites modify their environment, resulting in higher methane oxidation and selecting and/or enriching for a distinct methanotroph population. PMID:24038691

Termites facilitate methane oxidation and shape the methanotrophic community.

PubMed

Ho, Adrian; Erens, Hans; Mujinya, Basile Bazirake; Boeckx, Pascal; Baert, Geert; Schneider, Bellinda; Frenzel, Peter; Boon, Nico; Van Ranst, Eric

2013-12-01

Termite-derived methane contributes 3 to 4% to the total methane budget globally. Termites are not known to harbor methane-oxidizing microorganisms (methanotrophs). However, a considerable fraction of the methane produced can be consumed by methanotrophs that inhabit the mound material, yet the methanotroph ecology in these environments is virtually unknown. The potential for methane oxidation was determined using slurry incubations under conditions with high (12%) and in situ (∼0.004%) methane concentrations through a vertical profile of a termite (Macrotermes falciger) mound and a reference soil. Interestingly, the mound material showed higher methanotrophic activity. The methanotroph community structure was determined by means of a pmoA-based diagnostic microarray. Although the methanotrophs in the mound were derived from populations in the reference soil, it appears that termite activity selected for a distinct community. Applying an indicator species analysis revealed that putative atmospheric methane oxidizers (high-indicator-value probes specific for the JR3 cluster) were indicative of the active nest area, whereas methanotrophs belonging to both type I and type II were indicative of the reference soil. We conclude that termites modify their environment, resulting in higher methane oxidation and selecting and/or enriching for a distinct methanotroph population.

Globalization and Women in Southeast Asian Higher Education Management.

ERIC Educational Resources Information Center

Luke, Carmen

2002-01-01

This case study of Southeast Asian women in higher education management investigates culture-specific dimensions of "glass ceiling" impediments to career advancement in higher education. Respondents note that despite considerable training and expertise, Asian values and ideologies demand enactment of a construct of Asian femininity that…

South Carolina Commission on Higher Education Update. Volume 2, Issue 2

ERIC Educational Resources Information Center

South Carolina Commission on Higher Education, 2007

2007-01-01

In this issue, Dr. Garrison Walters, executive director of the South Carolina Commission on Higher Education, observes that a better job must be done in making others across the country more aware that South Carolina has an outstanding system of higher education. Despite its considerable strengths in higher education, the state has to do…

Factors Associated with Shiga Toxin-Producing Escherichia coli Shedding by Dairy and Beef Cattle

PubMed Central

Venegas-Vargas, Cristina; Henderson, Scott; Khare, Akanksha; Mosci, Rebekah E.; Lehnert, Jonathan D.; Singh, Pallavi; Ouellette, Lindsey M.; Norby, Bo; Funk, Julie A.; Rust, Steven; Bartlett, Paul C.; Grooms, Daniel

2016-01-01

ABSTRACT Shiga toxin-producing Escherichia coli (STEC) is an important foodborne pathogen that can cause hemorrhagic colitis and hemolytic-uremic syndrome. Cattle are the primary reservoir for STEC, and food or water contaminated with cattle feces is the most common source of infections in humans. Consequently, we conducted a cross-sectional study of 1,096 cattle in six dairy herds (n = 718 animals) and five beef herds (n = 378 animals) in the summers of 2011 and 2012 to identify epidemiological factors associated with shedding. Fecal samples were obtained from each animal and cultured for STEC. Multivariate analyses were performed to identify risk factors associated with STEC positivity. The prevalence of STEC was higher in beef cattle (21%) than dairy cattle (13%) (odds ratio [OR], 1.76; 95% confidence interval [CI], 1.25, 2.47), with considerable variation occurring across herds (range, 6% to 54%). Dairy cattle were significantly more likely to shed STEC when the average temperature was >28.9°C 1 to 5 days prior to sampling (OR, 2.5; 95% CI, 1.25, 4.91), during their first lactation (OR, 1.8; 95% CI, 1.1, 2.8), and when they were <30 days in milk (OR, 3.9; 95% CI, 2.1, 7.2). These data suggest that the stress or the negative energy balance associated with lactation may result in increased STEC shedding frequencies in Michigan during the warm summer months. Future prevention strategies aimed at reducing stress during lactation or isolating high-risk animals could be implemented to reduce herd-level shedding levels and avoid transmission of STEC to susceptible animals and people. IMPORTANCE STEC shedding frequencies vary considerably across cattle herds in Michigan, and the shedding frequency of strains belonging to non-O157 serotypes far exceeds the shedding frequency of O157 strains, which is congruent with human infections in the state. Dairy cattle sampled at higher temperatures, in their first lactation, and early in the milk production stage were significantly more likely to shed STEC, which could be due to stress or a negative energy balance. Future studies should focus on the isolation of high-risk animals to decrease herd shedding levels and the potential for contamination of the food supply. PMID:27342555

Geographical and meteorological factors associated with isolation of Listeria species in New York State produce production and natural environments.

PubMed

Chapin, Travis K; Nightingale, Kendra K; Worobo, Randy W; Wiedmann, Martin; Strawn, Laura K

2014-11-01

Listeria species have been isolated from diverse environments, often at considerable prevalence, and are known to persist in food processing facilities. The presence of Listeria spp. has been suggested to be a marker for Listeria monocytogenes contamination. Therefore, a study was conducted to (i) determine the prevalence and diversity of Listeria spp. in produce production and natural environments and (ii) identify geographical and/or meteorological factors that affect the isolation of Listeria spp. in these environments. These data were also used to evaluate Listeria spp. as index organisms for L. monocytogenes in produce production environments. Environmental samples collected from produce production (n = 588) and natural (n = 734) environments in New York State were microbiologically analyzed to detect and isolate Listeria spp. The prevalence of Listeria spp. was approximately 33 and 34% for samples obtained from natural environments and produce production, respectively. Co-isolation of L. monocytogenes and at least one other species of Listeria in a given sample was recorded for 3 and 9% of samples from natural environments and produce production, respectively. Soil moisture and proximity to water and pastures were highly associated with isolation of Listeria spp. in produce production environments, while elevation, study site, and proximity to pastures were highly associated with isolation of Listeria spp. in natural environments, as determined by randomForest models. These data show that Listeria spp. were prevalent in both agricultural and nonagricultural environments and that geographical and meteorological factors associated with isolation of Listeria spp. were considerably different between the two environments.

Slower phloem transport in gymnosperm trees can be attributed to higher sieve element resistance.

PubMed

Liesche, Johannes; Windt, Carel; Bohr, Tomas; Schulz, Alexander; Jensen, Kaare H

2015-04-01

In trees, carbohydrates produced in photosynthesizing leaves are transported to roots and other sink organs over distances of up to 100 m inside a specialized transport tissue, the phloem. Angiosperm and gymnosperm trees have a fundamentally different phloem anatomy with respect to cell size, shape and connectivity. Whether these differences have an effect on the physiology of carbohydrate transport, however, is not clear. A meta-analysis of the experimental data on phloem transport speed in trees yielded average speeds of 56 cm h(-1) for angiosperm trees and 22 cm h(-1) for gymnosperm trees. Similar values resulted from theoretical modeling using a simple transport resistance model. Analysis of the model parameters clearly identified sieve element (SE) anatomy as the main factor for the significantly slower carbohydrate transport speed inside the phloem in gymnosperm compared with angiosperm trees. In order to investigate the influence of SE anatomy on the hydraulic resistance, anatomical data on SEs and sieve pores were collected by transmission electron microscopy analysis and from the literature for 18 tree species. Calculations showed that the hydraulic resistance is significantly higher in the gymnosperm than in angiosperm trees. The higher resistance is only partially offset by the considerably longer SEs of gymnosperms. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Formulation and Evaluation of Guggul Lipid Nanovesicles for Transdermal Delivery of Aceclofenac

PubMed Central

Gaur, Praveen Kumar; Mishra, Shikha; Aeri, Vidhu

2014-01-01

Context. Most new drugs have low water solubility and liposome is an important formulation to administer such drugs; however, it is quite unstable and has negligible systemic absorption. Objective. Aceclofenac nanovesicles were made using guggul lipid for formulating stable transdermal formulation. Materials and Methods. Guggul lipid was formulated into vesicles along with cholesterol and dicetyl phosphate using film hydration method. The formulations were analyzed for physicochemical properties and stability. Then its skin permeation and anti-inflammatory activity were determined. Results. Both categories of vesicles (PC and GL) showed optimum physicochemical properties; however, accelerated stability study showed considerable differences. GL-1 was appreciably stable for over 6 months at 4°C. Corresponding gels (PCG-1 and GLG-1) showed C max values at 4.98 and 7.32 μg/mL along with the T max values at 4 and 8 hours, respectively. GLG-1 inhibited edema production by 90.81% in 6 hours. Discussion. PC liposomes are unstable at higher temperature and upon longer storage. The formulation with higher lipid content (GL-1) showed good drug retention after 24 hours and appreciable stability both at higher temperature and for longer duration. Guggul lipid being a planar molecule might be stacked in vesicle wall with cholesterol. Conclusion. The composition of the nanovesicle played an important role in stability and drug permeation. Guggul lipid is suitable for producing stable vesicles. PMID:24672328

Challenges in the Transition to Higher Education for Foster Care Youth

ERIC Educational Resources Information Center

Piel, Megan Hayes

2018-01-01

This chapter acknowledges the contextual considerations in preparation and success in higher education and establishes a foundation of knowledge for researchers, educators, and practitioners to support foster youth in community college settings.

A Distributed Leadership Change Process Model for Higher Education

ERIC Educational Resources Information Center

Jones, Sandra; Harvey, Marina

2017-01-01

The higher education sector operates in an increasingly complex global environment that is placing it under considerable stress and resulting in widespread change to the operating context and leadership of higher education institutions. The outcome has been the increased likelihood of conflict between academics and senior leaders, presaging the…

Opportunistic Entrepreneurialism and Internationalisation of Higher Education: Lessons from the Antipodes?

ERIC Educational Resources Information Center

Welch, Anthony

2012-01-01

Both attitudes towards, and practices of, entrepreneurialism in higher education vary. Beginning from a consideration of arguments about the character of entrepreneurialism in higher education, and the claim that the so-called Anglo-American democracies have moved further and faster down the road of entrepreneurialism, the article selects…

Characteristics of laser produced plasmas of hafnium and tantalum in the 1-7 nm region

NASA Astrophysics Data System (ADS)

Li, Bowen; Otsuka, Takamitsu; Sokell, Emma; Dunne, Padraig; O'Sullivan, Gerry; Hara, Hiroyuki; Arai, Goki; Tamura, Toshiki; Ono, Yuichi; Dinh, Thanh-Hung; Higashiguchi, Takeshi

2017-11-01

Soft X-ray (SXR) spectra from hafnium and tantalum laser produced plasmas were recorded in the 1-7 nm region using two Nd:YAG lasers with pulse lengths of 170 ps and 10 ns, respectively, operating at a range of power densities. The maximum focused peak power density was 2. 3 × 1014 W cm-2 for 170 ps pulses and 1. 8 × 1012 W cm-2 for 10 ns pulses, respectively. Two intense quasicontinuous intensity bands resulting from n = 4 - n = 4 and n = 4 - n = 5 unresolved transition arrays (UTAs) dominate both sets of experimental spectra. Comparison with calculations performed with the Cowan suite of atomic structure codes as well as consideration of previous experimental and theoretical results aided identification of the most prominent features in the spectra. For the 10 ns spectrum, the highest ion stage that could be identified from the n = 4 - n = 5 arrays were lower than silver-like Hf25+ and Ta26+ (which has a 4 d 104 f ground configuration) indicating that the plasma temperature attained was too low to produce ions with an outermost 4 d subshell, while for the 170 ps plasmas the presence of significantly higher stages was deduced and lines due to 4 d-5 p transitions were clearly evident. Furthermore, we show an enhancement of emission from tantalum using dual laser irradiation, and the effect of pre-pulse durations and delay times between two pulses are demonstrated.

Dwell Notch Low Cycle Fatigue Behavior of a Powder Metallurgy Nickel Disk Alloy

NASA Technical Reports Server (NTRS)

Telesman, J.; Gabb, T. P.; Yamada, Y.; Ghosn, L. J.; Jayaraman, N.

2012-01-01

A study was conducted to determine the processes which govern dwell notch low cycle fatigue (NLCF) behavior of a powder metallurgy (P/M) ME3 disk superalloy. The emphasis was placed on the environmentally driven mechanisms which may embrittle the highly stressed notch surface regions and reduce NLCF life. In conjunction with the environmentally driven notch surface degradation processes, the visco-plastic driven mechanisms which can significantly change the notch root stresses were also considered. Dwell notch low cycle fatigue testing was performed in air and vacuum on a ME3 P/M disk alloy specimens heat treated using either a fast or a slow cooling rate from the solutioning treatment. It was shown that dwells at the minimum stress typically produced a greater life debit than the dwells applied at the maximum stress, especially for the slow cooled heat treatment. Two different environmentally driven failure mechanisms were identified as the root cause of early crack initiation in the min dwell tests. Both of these failure mechanisms produced mostly a transgranular crack initiation failure mode and yet still resulted in low NLCF fatigue lives. The lack of stress relaxation during the min dwell tests produced higher notch root stresses which caused early crack initiation and premature failure when combined with the environmentally driven surface degradation mechanisms. The importance of environmental degradation mechanisms was further highlighted by vacuum dwell NLCF tests which resulted in considerably longer NLCF lives, especially for the min dwell tests.

Carbon Source Requirements for Exopolysaccharide Production by Lactobacillus casei CG11 and Partial Structure Analysis of the Polymer

PubMed Central

Cerning, J.; Renard, C. M. G. C.; Thibault, J. F.; Bouillanne, C.; Landon, M.; Desmazeaud, M.; Topisirovic, L.

1994-01-01

Exopolysaccharide production by Lactobacillus casei CG11 was studied in basal minimum medium containing various carbon sources (galactose, glucose, lactose, sucrose, maltose, melibiose) at concentrations of 2, 5, 10, and 20 g/liter. L. casei CG11 produced exopolysaccharides in basal minimum medium containing each of the sugars tested; lactose and galactose were the poorest carbon sources, and glucose was by far the most efficient carbon source. Sugar concentrations had a marked effect on polymer yield. Plasmid-cured Muc- derivatives grew better in the presence of glucose and attained slightly higher populations than the wild-type strain. The values obtained with lactose were considerably lower for both growth and exopolysaccharide yield. The level of specific polymer production per cell obtained with glucose was distinctively lower for Muc- derivatives than for the Muc+ strain. The polymer produced by L. casei CG11 in the presence of glucose was different from that formed in the presence of lactose. The polysaccharide produced by L. casei CG11 in basal minimum medium containing 20 g of glucose per liter had an intrinsic viscosity of 1.13 dl/g. It was rich in glucose (76%), which was present mostly as 2- or 3-linked residues along with some 2,3 doubly substituted glucose units, and in rhamnose (21%), which was present as 2-linked or terminal rhamnose; traces of mannose and galactose were also present. PMID:16349427

Corrosion Considerations for Thermochemical Biomass Liquefaction Process Systems in Biofuel Production

NASA Astrophysics Data System (ADS)

Brady, M. P.; Keiser, J. R.; Leonard, D. N.; Whitmer, L.; Thomson, J. K.

2014-12-01

Thermochemical liquefaction processing of biomass to produce bio-derived fuels (e.g., gasoline, jet fuel, diesel, home heating oil, etc.) is of great recent interest as a renewable energy source. Approaches under investigation include direct liquefaction, hydrothermal liquefaction, hydropyrolysis, fast pyrolysis, etc., to produce energy dense liquids that can be utilized as produced or further processed to provide products of higher value. An issue with bio-oils is that they tend to contain significant concentrations of organic oxygenates, including acids, which make the bio-oil a potential source of corrosion issues in transport, storage, and use. Efforts devoted to modified/further processing of bio-oils to make them less corrosive are currently being widely pursued. Another issue that must also be addressed in bio-oil liquefaction is potential corrosion issues in the process equipment. Depending on the specific process, bio-oil liquefaction production temperatures are typically in the 300-600°C range, and the process environment can contain aggressive sulfur and halide species from both the biomass used and/or process additives. Detailed knowledge of the corrosion resistance of candidate process equipment alloys in these bio-oil production environments is currently lacking. This paper summarizes recent, ongoing efforts to assess the extent of corrosion of bio-oil process equipment, with the ultimate goal of providing a basis for the selection of the lowest cost alloy grades capable of providing the long-term corrosion resistance needed for future bio-oil production plants.

Natural gas price uncertainty and the cost-effectiveness of hedging against low hydropower revenues caused by drought

NASA Astrophysics Data System (ADS)

Kern, Jordan D.; Characklis, Gregory W.; Foster, Benjamin T.

2015-04-01

Prolonged periods of low reservoir inflows (droughts) significantly reduce a hydropower producer's ability to generate both electricity and revenues. Given the capital intensive nature of the electric power industry, this can impact hydropower producers' ability to pay down outstanding debt, leading to credit rating downgrades, higher interests rates on new debt, and ultimately, greater infrastructure costs. One potential tool for reducing the financial exposure of hydropower producers to drought is hydrologic index insurance, in particular, contracts structured to payout when streamflows drop below a specified level. An ongoing challenge in developing this type of insurance, however, is minimizing contracts' "basis risk," that is, the degree to which contract payouts deviate in timing and/or amount from actual damages experienced by policyholders. In this paper, we show that consideration of year-to-year changes in the value of hydropower (i.e., the cost of replacing it with an alternative energy source during droughts) is critical to reducing contract basis risk. In particular, we find that volatility in the price of natural gas, a key driver of peak electricity prices, can significantly degrade the performance of index insurance unless contracts are designed to explicitly consider natural gas prices when determining payouts. Results show that a combined index whose value is derived from both seasonal streamflows and the spot price of natural gas yields contracts that exhibit both lower basis risk and greater effectiveness in terms of reducing financial exposure.

Engineering of Corynebacterium glutamicum for high-yield L-valine production under oxygen deprivation conditions.

PubMed

Hasegawa, Satoshi; Suda, Masako; Uematsu, Kimio; Natsuma, Yumi; Hiraga, Kazumi; Jojima, Toru; Inui, Masayuki; Yukawa, Hideaki

2013-02-01

We previously demonstrated efficient L-valine production by metabolically engineered Corynebacterium glutamicum under oxygen deprivation. To achieve the high productivity, a NADH/NADPH cofactor imbalance during the synthesis of l-valine was overcome by engineering NAD-preferring mutant acetohydroxy acid isomeroreductase (AHAIR) and using NAD-specific leucine dehydrogenase from Lysinibacillus sphaericus. Lactate as a by-product was largely eliminated by disrupting the lactate dehydrogenase gene ldhA. Nonetheless, a few other by-products, particularly succinate, were still produced and acted to suppress the L-valine yield. Eliminating these by-products therefore was deemed key to improving theL-valine yield. By additionally disrupting the phosphoenolpyruvate carboxylase gene ppc, succinate production was effectively suppressed, but both glucose consumption and L-valine production dropped considerably due to the severely elevated intracellular NADH/NAD(+) ratio. In contrast, this perturbed intracellular redox state was more than compensated for by deletion of three genes associated with NADH-producing acetate synthesis and overexpression of five glycolytic genes, including gapA, encoding NADH-inhibited glyceraldehyde-3-phosphate dehydrogenase. Inserting feedback-resistant mutant acetohydroxy acid synthase and NAD-preferring mutant AHAIR in the chromosome resulted in higher L-valine yield and productivity. Deleting the alanine transaminase gene avtA suppressed alanine production. The resultant strain produced 1,280 mM L-valine at a yield of 88% mol mol of glucose(-1) after 24 h under oxygen deprivation, a vastly improved yield over our previous best.

Engineering of Corynebacterium glutamicum for High-Yield l-Valine Production under Oxygen Deprivation Conditions

PubMed Central

Hasegawa, Satoshi; Suda, Masako; Uematsu, Kimio; Natsuma, Yumi; Hiraga, Kazumi; Jojima, Toru; Inui, Masayuki

2013-01-01

We previously demonstrated efficient l-valine production by metabolically engineered Corynebacterium glutamicum under oxygen deprivation. To achieve the high productivity, a NADH/NADPH cofactor imbalance during the synthesis of l-valine was overcome by engineering NAD-preferring mutant acetohydroxy acid isomeroreductase (AHAIR) and using NAD-specific leucine dehydrogenase from Lysinibacillus sphaericus. Lactate as a by-product was largely eliminated by disrupting the lactate dehydrogenase gene ldhA. Nonetheless, a few other by-products, particularly succinate, were still produced and acted to suppress the l-valine yield. Eliminating these by-products therefore was deemed key to improving the l-valine yield. By additionally disrupting the phosphoenolpyruvate carboxylase gene ppc, succinate production was effectively suppressed, but both glucose consumption and l-valine production dropped considerably due to the severely elevated intracellular NADH/NAD+ ratio. In contrast, this perturbed intracellular redox state was more than compensated for by deletion of three genes associated with NADH-producing acetate synthesis and overexpression of five glycolytic genes, including gapA, encoding NADH-inhibited glyceraldehyde-3-phosphate dehydrogenase. Inserting feedback-resistant mutant acetohydroxy acid synthase and NAD-preferring mutant AHAIR in the chromosome resulted in higher l-valine yield and productivity. Deleting the alanine transaminase gene avtA suppressed alanine production. The resultant strain produced 1,280 mM l-valine at a yield of 88% mol mol of glucose−1 after 24 h under oxygen deprivation, a vastly improved yield over our previous best. PMID:23241971

Corrosion considerations for thermochemical biomass liquefaction process systems in biofuel production

DOE PAGES

Brady, Michael P.; Keiser, James R.; Leonard, Donovan N.; ...

2014-11-11

Thermochemical liquifaction processing of biomass to produce bio-derived fuels (e.g. gasoline, jet fuel, diesel, home heating oil, etc.) is of great recent interest as a renewable energy source. Approaches under investigation include direct liquefaction, hydrothermal liquefaction, hydropyrolysis, fast pyrolysis, etc. to produce energy dense liquids that can be utilized as produced or further processed to provide products of higher value. An issue with bio-oils is that they tend to contain significant concentrations of organic compounds, which make the bio-oil acidic and a potential source of corrosion issues in in transport, storage, and use. Efforts devoted to modified/further processing of bio-oilsmore » to make them less corrosive are currently being widely pursued. Another aspect that must also be addressed is potential corrosion issues in the bio-oil liquefaction process equipment itself. Depending on the specific process, bio-oil liquefaction production temperatures can reach up to 400-600 °C, and involve the presence of aggressive sulfur, and halide species from both the biomass used and/or process additives. Detailed knowledge of the corrosion resistance of candidate process equipment alloys in these bio-oil production environments is currently lacking. Lastly, this paper summarizes our recent, ongoing efforts to assess the extent to which corrosion of bio-oil process equipment may be an issue, with the ultimate goal of providing the basis to select the lowest cost alloy grades capable of providing the long-term corrosion resistance needed for future bio-oil production plants.« less

Engineered strains of Streptococcus macedonicus towards an osmotic stress resistant phenotype retain their ability to produce the bacteriocin macedocin under hyperosmotic conditions.

PubMed

Anastasiou, Rania; Driessche, Gonzalez Van; Boutou, Effrossyni; Kazou, Maria; Alexandraki, Voula; Vorgias, Constantinos E; Devreese, Bart; Tsakalidou, Effie; Papadimitriou, Konstantinos

2015-10-20

Streptococcus macedonicus ACA-DC 198 produces the bacteriocin macedocin in milk only under low NaCl concentrations (<1.0%w/v). The thermosensitive plasmid pGh9:ISS1 was employed to generate osmotic stress resistant (osmr) mutants of S. macedonicus. Three osmr mutants showing integration of the vector in unique chromosomal sites were identified and the disrupted loci were characterized. Interestingly, the mutants were able to grow and to produce macedocin at considerably higher concentrations of NaCl compared to the wild-type (up to 4.0%w/v). The production of macedocin under hyperosmotic conditions solely by the osmr mutants was validated by the well diffusion assay and by mass spectrometry analysis. RT-PCR experiments demonstrated that the macedocin biosynthetic regulon was transcribed at high salt concentrations only in the mutants. Mutant osmr3, the most robust mutant, was converted in its markerless derivative (osmr3f). Co-culture of S. macedonicus with spores of Clostridium tyrobutyricum in milk demonstrated that only the osmr3f mutant and not the wild-type inhibited the growth of the spores under hyperosmotic conditions (i.e., 2.5%w/v NaCl) due to the production of macedocin. Our study shows how genetic manipulation of a strain towards a stress resistant phenotype could improve bacteriocin production under conditions of the same stress. Copyright © 2015 Elsevier B.V. All rights reserved.

Origin of genetic variation: regulation of genetic recombination in the higher organisms - a theory.

PubMed

Pandey, K K

1972-01-01

Recent studies in the fungi, particularly Neurospora and Schizophyllum, have revealed a number of genetic features which, viewed in conjunction with earlier observations on other organisms, form a pattern, or model, which appears to be basic to the control of recombination in all eukaryotes, including higher organisms. It is assumed that the control is exercised on mechanisms that produce new alleles through recombination, as understood in broad terms and including such a likely phenomenon as gene conversion, which may or may not involve crossing-over, as well as equal and unequal crossing-over. The recombination may thus occur between alleles in either the homozygous or heterozygous condition. In the model, regulatory genes and breeding behaviour are integrated into one self-regulatory system controlling the production of new genetic variation.The model is based on the following five general features, largely substantiated by the results in Neurospora and Schizophyllum: 1) The frequency of recombination in a particular chromosomal region is controlled by specific regulatory genes (rec). 2) There may be a number of such specific, regulatory genes responsible for recombination in a given region. 3) A rec. locus may influence recombination in more than one region. 4) The regulatory genes have no specific physical relationship with the region(s) they control, and are usually located at random in the genome. 5) Of the allelic forms of the regulatory genes it is always the dominant gene which suppresses recombination and the recessive gene which increases recombination. The rec system is epistatic to other genetic elements jointly involved in the overall control of recombination in a specific region. It is suggested that usually the control of recombination in a given region is exercised, cumulatively, by the balance of the dominant and recessive genes of the specific rec loci in the organism. Outbreeding, with the associated high heterozygosity of the regulatory rec loci, virtually "switches off" recombination, producing few new variations. Inbreeding produces homozygosity of these loci, resulting in certain individuals which will have a considerable number of their regulatory loci in the homozygous recessive condition and in which recombination will be "switched on", producing new variation at a high frequency. Inbreeding is thus an integrated, evolutionary system of considerable importance, and is not a degenerate "dead end", as many investigators have previously thought.The model has another compensatory function in evolution. In major loci, or in an operon, where there are structural genes and closely linked operator genes, as exemplified by the S locus, there are indications that the present model is concerned with the regulation of both structural and operator genes. The consequences of the model in the two classes of genes, however, are in direct contrast to each other: High heterozygosity which is instrumental in switching "off" recombination, and which is therefore helpful in maintaining stability in the structural gene, is conducive to functional variation of the operator gene; and high homozygosity, which is instrumental in switching "on" recombination, and which is therefore helpful in producing variation in the structural gene, is conducive to the stability of the operator gene.This model of the control of genetic variation in a specific chromosomal region is significant in development as well as in evolution, and throws light on a number of hitherto "intractable" problems peculiar to the higher organisms. For example, the model is helpful in explaining: 1) the origin of new self-incompatibility alleles in the flowering plants; 2) the impressive speciation in the waif flora (and fauna) of the oceanic islands; 3) the presence of high genetic variability in inbreeding species of plants; 4) environmentally-induced heritable variation in certain plants; and 5) the genetic mechanism of antibody diversity in animals.

Implementing eLearning Programmes for Higher Education: A Review of the Literature

ERIC Educational Resources Information Center

O'Neill, Kayte; Singh, Gurmak; O'Donoghue, John

2004-01-01

This paper is a consideration of the issues associated with the infrastructural aspects, pedagogic considerations and the need to associate the usefulness of technology to enhance the learning experience. This technological path will potentially enhance the learning process, not replace the lecturer or tutor. For lecturers and students, the…

Activatable fluorescent probes in fluorescence-guided surgery: Practical considerations.

PubMed

Mochida, Ai; Ogata, Fusa; Nagaya, Tadanobu; Choyke, Peter L; Kobayashi, Hisataka

2018-02-15

Fluorescence-guided imaging during surgery is a promising technique that is increasingly used to aid surgeons in identifying sites of tumor and surgical margins. Of the two types of fluorescent probes, always-on and activatable, activatable probes are preferred because they produce higher target-to-background ratios, thus improving sensitivity compared with always-on probes that must contend with considerable background signal. There are two types of activatable probes: 1) enzyme-reactive probes that are normally quenched but can be activated after cleavage by cancer-specific enzymes (activity-based probes) and 2) molecular-binding probes which use cancer targeting moieties such as monoclonal antibodies to target receptors found in abundance on cancers and are activated after internalization and lysosomal processing (binding-based probes). For fluorescence-guided intraoperative surgery, enzyme-reactive probes are superior because they can react quickly, require smaller dosages especially for topical applications, have limited side effects, and have favorable pharmacokinetics. Enzyme-reactive probes are easier to use, fit better into existing work flows in the operating room and have minimal toxicity. Although difficult to prove, it is assumed that the guidance provided to surgeons by these probes results in more effective surgeries with better outcomes for patients. In this review, we compare these two types of activatable fluorescent probes for their ease of use and efficacy. Published by Elsevier Ltd.

Cost-effectiveness analysis of a randomized trial comparing care models for chronic kidney disease.

PubMed

Hopkins, Robert B; Garg, Amit X; Levin, Adeera; Molzahn, Anita; Rigatto, Claudio; Singer, Joel; Soltys, George; Soroka, Steven; Parfrey, Patrick S; Barrett, Brendan J; Goeree, Ron

2011-06-01

Potential cost and effectiveness of a nephrologist/nurse-based multifaceted intervention for stage 3 to 4 chronic kidney disease are not known. This study examines the cost-effectiveness of a chronic disease management model for chronic kidney disease. Cost and cost-effectiveness were prospectively gathered alongside a multicenter trial. The Canadian Prevention of Renal and Cardiovascular Endpoints Trial (CanPREVENT) randomized 236 patients to receive usual care (controls) and another 238 patients to multifaceted nurse/nephrologist-supported care that targeted factors associated with development of kidney and cardiovascular disease (intervention). Cost and outcomes over 2 years were examined to determine the incremental cost-effectiveness of the intervention. Base-case analysis included disease-related costs, and sensitivity analysis included all costs. Consideration of all costs produced statistically significant differences. A lower number of days in hospital explained most of the cost difference. For both base-case and sensitivity analyses with all costs included, the intervention group required fewer resources and had higher quality of life. The direction of the results was unchanged to inclusion of various types of costs, consideration of payer or societal perspective, changes to the discount rate, and levels of GFR. The nephrologist/nurse-based multifaceted intervention represents good value for money because it reduces costs without reducing quality of life for patients with chronic kidney disease.

Fluorescence of dissolved organic matter: A comparison of north Pacific and north Atlantic Oceans during April 1991

NASA Technical Reports Server (NTRS)

Hoge, Frank E.; Swift, Robert N.; Yungel, James K.; Vodacek, Anthony

1993-01-01

Profiles of airborne-laser-induced fluorescence emission from dissolved organic matter in the upper ocean have been produced and compared for the Southern California Bight (SCB) and the Mid-Atlantic Bight (MAB). Findings were as follows. (1) The fluorescent components of dissolved organic matter (FDOM) are present in easily measurable quantities from near shore to well over 300 km offshore in the SCB and are likewise easily measurable in the coastal, shelf, slope, and Gulf Stream waters of the MAB. (2) The reange of FDOM in the MAB is considerably greater than that in the SCB. (3) The lowest FDOM levels observed in the SCB were higher than those found in the Gulf Stream. (4) The onshore-to-offshore spatial gradient of the FDOM was found to be considerably lower in the SCB than in the MAB, with the highest levels of FDOM being found immediately adjacent to the coast in the MAB. This suggests that the water adjacent to the SCB shoreline is not as strongly influenced by terrestrial and estuarine sources of FDOM as the MAB is. (5) The spatial distribution of the FDOM within both the SCB and the MAB is frequently coherent with the spatial distribution of chlorophyll determined form the concurrent airborne- laser- induced phytoplankton pigment fluorescence measurements. However, distinct noncoherency is sometimes observed, especially at water mass boundaries.

Tolerancing a lens for LED uniform illumination

NASA Astrophysics Data System (ADS)

Ryu, Jieun; Sasian, Jose

2017-08-01

A method to evaluate tolerance sensitivities for lenses used to produce uniform illumination is presented. Closed form surfaces are used to define optical surfaces and relative illumination is calculated from light etendue considerations.

Studies on hepatic lipidosis and coinciding health and fertility problems of high-producing dairy cows using the "Utrecht fatty liver model of dairy cows". A review.

PubMed

Geelen, M J H; Wensing, T

2006-09-01

Fatty liver or hepatic lipidosis is a major metabolic disorder of high-producing dairy cows that occurs rather frequently in early lactation and is associated with decreased health, production and fertility. A background section of the review explores reasons why high-producing dairy cows are prone to develop fatty liver post partum. Hepatic lipidosis and coinciding health and fertility problems seriously endanger profitability and longevity of the dairy cow. Results from a great number of earlier epidemiological and clinical studies made it clear that a different approach was needed for elucidation of pathogenesis and etiology of this complex of health problems. There was a need for an adequate animal model in which hepatic lipidosis and production, health and fertility problems could be provoked under controlled conditions. It was hypothesized that overconditioning ante partum and feed restriction post partum might induce lipolysis in adipose tissue and triacylglycerol accumulation in the liver following calving. This consideration formed the basis for the experiments, which resulted in the "Utrecht fatty liver model of dairy cows". In this model, post partum triacylglycerol-lipidosis as well as the whole complex of health and fertility problems are induced under well-controlled conditions. The experimental protocol based on this hypothesis produced in all cases (10 feeding trials with over 150 dairy cattle) the intended result, i.e. all experimental cows developed post partum higher hepatic triacylglycerol concentrations than did control cows. The model was evaluated in biochemical, clinical pathology, immunological, clinical and fertility terms. It turned out that in this model, post partum triacylglycerol-lipidosis as well as the whole complex of health and fertility problems were induced under well-controlled conditions.

Early Program Development

NASA Image and Video Library

1961-01-01

As presented by Gerhard Heller of Marshall Space Flight Center's Research Projects Division in 1961, this chart illustrates three basic types of electric propulsion systems then under consideration by NASA. The ion engine (top) utilized cesium atoms ionized by hot tungsten and accelerated by an electrostatic field to produce thrust. The arc engine (middle) achieved propulsion by heating a propellant with an electric arc and then producing an expansion of the hot gas or plasma in a convergent-divergent duct. The electromagnetic, or MFD engine (bottom) manipulated strong magnetic fields to interact with a plasma and produce acceleration.

Effects of irrigation water salinity on evapotranspiration modified by leaching fractions in hot pepper plants.

PubMed

Qiu, Rangjian; Liu, Chunwei; Wang, Zhenchang; Yang, Zaiqiang; Jing, Yuanshu

2017-08-03

We investigated whether leaching fraction (LF) is able to modify the effects of irrigation water salinity (EC iw ) on evapotranspiration (ET). We conducted an experiment with a completely randomized block design using five levels of EC iw and two LFs. Results showed that the electrical conductivity of drainage water (EC dw ) in an LF of 0.29 was considerably higher during the 21-36 days after transplanting (DAT), and considerably lower after 50 DAT than in an LF of 0.17. The hourly, nighttime, daily, cumulative and seasonal ET all decreased considerably as a result of an increase in the EC iw . The daily ET started to be considerably higher in the LF of 0.29 than in the LF of 0.17 from 65 DAT. Compared with the LF of 0.17, the seasonal ET in the LF of 0.29 under various EC iw levels increased by 4.8%-8.7%. The Maas and Hoffman and van Genuchten and Hoffman models both corresponded well with the measured relative seasonal ET and the LF had no marked effects on these model parameters. Collectively, an increase in the level of EC iw always decreased the ET substantially. An increase in the LF increased the ET considerably, but there was a time lag.

Development of a bespoke human factors taxonomy for gliding accident analysis and its revelations about highly inexperienced UK glider pilots.

PubMed

Jarvis, Steve; Harris, Don

2010-02-01

Low-hours solo glider pilots have a high risk of accidents compared to more experienced pilots. Numerous taxonomies for causal accident analysis have been produced for powered aviation but none of these is suitable for gliding, so a new taxonomy was required. A human factors taxonomy specifically for glider operations was developed and used to analyse all UK gliding accidents from 2002 to 2006 for their overall causes as well as factors specific to low hours pilots. Fifty-nine categories of pilot-related accident causation emerged, which were formed into progressively larger categories until four overall human factors groups were arrived at: 'judgement'; 'handling'; 'strategy'; 'attention'. 'Handling' accounted for a significantly higher proportion of injuries than other categories. Inexperienced pilots had considerably more accidents in all categories except 'strategy'. Approach control (path judgement, airbrake and speed handling) as well as landing flare misjudgement were chiefly responsible for the high accident rate in early solo glider pilots. Statement of Relevance: This paper uses extant accident data to produce a taxonomy of underlying human factors causes to analyse gliding accidents and identify the specific causes associated with low hours pilots. From this specific, well-targeted remedial measures can be identified.

Toward responsible stock enhancement: broadcast spawning dynamics and adaptive genetic management in white seabass aquaculture.

PubMed

Gruenthal, Kristen M; Drawbridge, Mark A

2012-06-01

The evolutionary effects captive-bred individuals that can have on wild conspecifics are necessary considerations for stock enhancement programs, but breeding protocols are often developed without the knowledge of realized reproductive behavior. To help fill that gap, parentage was assigned to offspring produced by a freely mating group of 50 white seabass (Atractoscion nobilis), a representative broadcast spawning marine finfish cultured for conservation. Similar to the well-known and closely related red drum (Sciaenops ocellatus), A. nobilis exhibited large variation in reproductive success. More males contributed and contributed more equally than females within and among spawns in a mating system best described as lottery polygyny. Two females produced 27% of the seasonal offspring pool and female breeding effective size averaged 1.85 per spawn and 12.38 seasonally, whereas male breeding effective size was higher (6.42 and 20.87, respectively), with every male contributing 1-7% of offspring. Further, females batch spawned every 1-5 weeks, while males displayed continuous reproductive readiness. Sex-specific mating strategies resulted in multiple successful mate pairings and a breeding effective to census size ratio of ≥0.62. Understanding a depleted species' mating system allowed management to more effectively utilize parental genetic variability for culture, but the fitness consequences of long-term stocking can be difficult to address.

Aerosol Delivery of a Candidate Universal Influenza Vaccine Reduces Viral Load in Pigs Challenged with Pandemic H1N1 Virus

PubMed Central

Morgan, Sophie B.; Hemmink, Johanneke D.; Porter, Emily; Harley, Ross; Shelton, Holly; Aramouni, Mario; Everett, Helen E.; Brookes, Sharon M.; Bailey, Michael; Townsend, Alain M.; Charleston, Bryan

2016-01-01

Influenza A viruses are a major health threat to livestock and humans, causing considerable mortality, morbidity, and economic loss. Current inactivated influenza vaccines are strain specific and new vaccines need to be produced at frequent intervals to combat newly arising influenza virus strains, so that a universal vaccine is highly desirable. We show that pandemic H1N1 influenza virus in which the hemagglutinin signal sequence has been suppressed (S-FLU), when administered to pigs by aerosol can induce CD4 and CD8 T cell immune responses in blood, bronchoalveolar lavage (BAL), and tracheobronchial lymph nodes. Neutralizing Ab was not produced. Detection of a BAL response correlated with a reduction in viral titer in nasal swabs and lungs, following challenge with H1N1 pandemic virus. Intratracheal immunization with a higher dose of a heterologous H5N1 S-FLU vaccine induced weaker BAL and stronger tracheobronchial lymph node responses and a lesser reduction in viral titer. We conclude that local cellular immune responses are important for protection against influenza A virus infection, that these can be most efficiently induced by aerosol immunization targeting the lower respiratory tract, and that S-FLU is a promising universal influenza vaccine candidate. PMID:27183611

Mechanisms of metal sorption by biochars: Biochar characteristics and modifications.

PubMed

Li, Hongbo; Dong, Xiaoling; da Silva, Evandro B; de Oliveira, Letuzia M; Chen, Yanshan; Ma, Lena Q

2017-07-01

Biochar produced by thermal decomposition of biomass under oxygen-limited conditions has received increasing attention as a cost-effective sorbent to treat metal-contaminated waters. However, there is a lack of information on the roles of different sorption mechanisms for different metals and recent development of biochar modification to enhance metal sorption capacity, which is critical for biochar field application. This review summarizes the characteristics of biochar (e.g., surface area, porosity, pH, surface charge, functional groups, and mineral components) and main mechanisms governing sorption of As, Cr, Cd, Pb, and Hg by biochar. Biochar properties vary considerably with feedstock material and pyrolysis temperature, with high temperature producing biochars with higher surface area, porosity, pH, and mineral contents, but less functional groups. Different mechanisms dominate sorption of As (complexation and electrostatic interactions), Cr (electrostatic interactions, reduction, and complexation), Cd and Pb (complexation, cation exchange, and precipitation), and Hg (complexation and reduction). Besides sorption mechanisms, recent advance in modifying biochar by loading with minerals, reductants, organic functional groups, and nanoparticles, and activation with alkali solution to enhance metal sorption capacity is discussed. Future research needs for field application of biochar include competitive sorption mechanisms of co-existing metals, biochar reuse, and cost reduction of biochar production. Published by Elsevier Ltd.

Trichoderma harzianum Produces a New Thermally Stable Acid Phosphatase, with Potential for Biotechnological Application

PubMed Central

Souza, Amanda Araújo; Leitão, Vanessa Oliveira; Ramada, Marcelo Henrique; Mehdad, Azadeh; Georg, Raphaela de Castro; Ulhôa, Cirano José; de Freitas, Sonia Maria

2016-01-01

Acid phosphatases (ACPases) are produced by a variety of fungi and have gained attention due their biotechnological potential in industrial, diagnosis and bioremediation processes. These enzymes play a specific role in scavenging, mobilization and acquisition of phosphate, enhancing soil fertility and plant growth. In this study, a new ACPase from Trichoderma harzianum, named ACPase II, was purified and characterized as a glycoprotein belonging to the acid phosphatase family. ACPase II presents an optimum pH and temperature of 3.8 and 65°C, respectively, and is stable at 55°C for 120 min, retaining 60% of its activity. The enzyme did not require metal divalent ions, but was inhibited by inorganic phosphate and tungstate. Affinity for several phosphate substrates was observed, including phytate, which is the major component of phosphorus in plant foods. The inhibition of ACPase II by tungstate and phosphate at different pH values is consistent with the inability of the substrate to occupy its active site due to electrostatic contacts that promote conformational changes, as indicated by fluorescence spectroscopy. A higher affinity for tungstate rather than phosphate at pH 4.0was observed, in accordance with its highest inhibitory effect. Results indicate considerable biotechnological potential of the ACPase II in soil environments. PMID:26938873

Simplifier: a web tool to eliminate redundant NGS contigs.

PubMed

Ramos, Rommel Thiago Jucá; Carneiro, Adriana Ribeiro; Azevedo, Vasco; Schneider, Maria Paula; Barh, Debmalya; Silva, Artur

2012-01-01

Modern genomic sequencing technologies produce a large amount of data with reduced cost per base; however, this data consists of short reads. This reduction in the size of the reads, compared to those obtained with previous methodologies, presents new challenges, including a need for efficient algorithms for the assembly of genomes from short reads and for resolving repetitions. Additionally after abinitio assembly, curation of the hundreds or thousands of contigs generated by assemblers demands considerable time and computational resources. We developed Simplifier, a stand-alone software that selectively eliminates redundant sequences from the collection of contigs generated by ab initio assembly of genomes. Application of Simplifier to data generated by assembly of the genome of Corynebacterium pseudotuberculosis strain 258 reduced the number of contigs generated by ab initio methods from 8,004 to 5,272, a reduction of 34.14%; in addition, N50 increased from 1 kb to 1.5 kb. Processing the contigs of Escherichia coli DH10B with Simplifier reduced the mate-paired library 17.47% and the fragment library 23.91%. Simplifier removed redundant sequences from datasets produced by assemblers, thereby reducing the effort required for finalization of genome assembly in tests with data from Prokaryotic organisms. Simplifier is available at http://www.genoma.ufpa.br/rramos/softwares/simplifier.xhtmlIt requires Sun jdk 6 or higher.

Force generation by groups of migrating bacteria

PubMed Central

Koch, Matthias D.; Liu, Guannan; Stone, Howard A.; Shaevitz, Joshua W.

2017-01-01

From colony formation in bacteria to wound healing and embryonic development in multicellular organisms, groups of living cells must often move collectively. Although considerable study has probed the biophysical mechanisms of how eukaryotic cells generate forces during migration, little such study has been devoted to bacteria, in particular with regard to the question of how bacteria generate and coordinate forces during collective motion. This question is addressed here using traction force microscopy. We study two distinct motility mechanisms of Myxococcus xanthus, namely, twitching and gliding. For twitching, powered by type-IV pilus retraction, we find that individual cells exert local traction in small hotspots with forces on the order of 50 pN. Twitching bacterial groups also produce traction hotspots, but with forces around 100 pN that fluctuate rapidly on timescales of <1.5 min. Gliding, the second motility mechanism, is driven by lateral transport of substrate adhesions. When cells are isolated, gliding produces low average traction on the order of 1 Pa. However, traction is amplified approximately fivefold in groups. Advancing protrusions of gliding cells push, on average, in the direction of motion. Together, these results show that the forces generated during twitching and gliding have complementary characters, and both forces have higher values when cells are in groups. PMID:28655845

Force generation by groups of migrating bacteria.

PubMed

Sabass, Benedikt; Koch, Matthias D; Liu, Guannan; Stone, Howard A; Shaevitz, Joshua W

2017-07-11

From colony formation in bacteria to wound healing and embryonic development in multicellular organisms, groups of living cells must often move collectively. Although considerable study has probed the biophysical mechanisms of how eukaryotic cells generate forces during migration, little such study has been devoted to bacteria, in particular with regard to the question of how bacteria generate and coordinate forces during collective motion. This question is addressed here using traction force microscopy. We study two distinct motility mechanisms of Myxococcus xanthus , namely, twitching and gliding. For twitching, powered by type-IV pilus retraction, we find that individual cells exert local traction in small hotspots with forces on the order of 50 pN. Twitching bacterial groups also produce traction hotspots, but with forces around 100 pN that fluctuate rapidly on timescales of <1.5 min. Gliding, the second motility mechanism, is driven by lateral transport of substrate adhesions. When cells are isolated, gliding produces low average traction on the order of 1 Pa. However, traction is amplified approximately fivefold in groups. Advancing protrusions of gliding cells push, on average, in the direction of motion. Together, these results show that the forces generated during twitching and gliding have complementary characters, and both forces have higher values when cells are in groups.

Fenton process combined with coagulation for the treatment of black liquor from bioethanol wastewater

NASA Astrophysics Data System (ADS)

Muryanto, Muryanto; Hanifah, Ummu; Amriani, Feni; Ibadurrahman, Ahmad Faiz; Sari, Ajeng Arum

2017-11-01

High amounts of black liquor are generated from bioethanol production by using oil palm empty fruit bunches. The black liquor is waste from alkaline pretreatment, it contains high amount of an alkaline solution (NaOH). The black liquor wastewater was highly contaminated with organic materials, and quite toxic for aquatic ecosystems if discharged directly into waters. This study aimed to determine ability of Fenton process combined with coagulation to treat black liquor. The addition 5% of polyaluminium chloride (PAC) could decolorized black liquor, degraded lignin, and produced sludge 70.64%, 68.28%, and 2.76 gram, respectively. Decolorization of black liquor was in line with degradation of black liquor because lignin is the main compound in black liquor. SEM images after addition of PAC of 5% indicated fragmentation of structure. Fenton reagent consist of 0.7 M FeSO4+ 3M H2O2 has able to decolorize black liquor, degrade lignin, and produce sludge 51.67% and 25.44%, and 0.44 gram, respectively. It was concluded that black liquor wastewater from bioethanol can be treated by using Fenton process combined with coagulation. However, these methods still need improvement to obtain the higher degradation rate, and coagulation sludge needs further consideration.

Uncertainty of sensory signal explains variation of color constancy.

PubMed

Witzel, Christoph; van Alphen, Carlijn; Godau, Christoph; O'Regan, J Kevin

2016-12-01

Color constancy is the ability to recognize the color of an object (or more generally of a surface) under different illuminations. Without color constancy, surface color as a perceptual attribute would not be meaningful in the visual environment, where illumination changes all the time. Nevertheless, it is not obvious how color constancy is possible in the light of metamer mismatching. Surfaces that produce exactly the same sensory color signal under one illumination (metamerism) may produce utterly different sensory signals under another illumination (metamer mismatching). Here we show that this phenomenon explains to a large extent the variation of color constancy across different colors. For this purpose, color constancy was measured for different colors in an asymmetric matching task with photorealistic images. Color constancy performance was strongly correlated to the size of metamer mismatch volumes, which describe the uncertainty of the sensory signal due to metamer mismatching for a given color. The higher the uncertainty of the sensory signal, the lower the observers' color constancy. At the same time, sensory singularities, color categories, and cone ratios did not affect color constancy. The present findings do not only provide considerable insight into the determinants of color constancy, they also show that metamer mismatch volumes must be taken into account when investigating color as a perceptual property of objects and surfaces.

Trichoderma harzianum Produces a New Thermally Stable Acid Phosphatase, with Potential for Biotechnological Application.

PubMed

Souza, Amanda Araújo; Leitão, Vanessa Oliveira; Ramada, Marcelo Henrique; Mehdad, Azadeh; Georg, Raphaela de Castro; Ulhôa, Cirano José; de Freitas, Sonia Maria

2016-01-01

Acid phosphatases (ACPases) are produced by a variety of fungi and have gained attention due their biotechnological potential in industrial, diagnosis and bioremediation processes. These enzymes play a specific role in scavenging, mobilization and acquisition of phosphate, enhancing soil fertility and plant growth. In this study, a new ACPase from Trichoderma harzianum, named ACPase II, was purified and characterized as a glycoprotein belonging to the acid phosphatase family. ACPase II presents an optimum pH and temperature of 3.8 and 65 °C, respectively, and is stable at 55 °C for 120 min, retaining 60% of its activity. The enzyme did not require metal divalent ions, but was inhibited by inorganic phosphate and tungstate. Affinity for several phosphate substrates was observed, including phytate, which is the major component of phosphorus in plant foods. The inhibition of ACPase II by tungstate and phosphate at different pH values is consistent with the inability of the substrate to occupy its active site due to electrostatic contacts that promote conformational changes, as indicated by fluorescence spectroscopy. A higher affinity for tungstate rather than phosphate at pH 4.0 was observed, in accordance with its highest inhibitory effect. Results indicate considerable biotechnological potential of the ACPase II in soil environments.

Genotypes and enterotoxicity of Staphylococcus aureus isolated from the hands and nasal cavities of flight-catering employees.

PubMed

Hatakka, M; Björkroth, K J; Asplund, K; Mäki-Petäys, N; Korkeala, H J

2000-11-01

Hand and nasal samples of flight-catering staff were collected from 1995 to 1997 to find employees carrying Staphylococcus aureus. Altogether 153 hand samples and 136 nose samples were taken. Nasal sampling showed a higher prevalence of S. aureus among food handlers (29%) than hand sampling (9%). A high proportion of the strains (46%) were enterotoxigenic, and a considerable amount of food handlers carried enterotoxigenic S. aureus, 6% and 12% according to hand and nasal sampling, respectively. Pulsed-field gel electrophoresis macrorestriction profiles revealed a total of 32 different types associated with the 35 employees carrying S. aureus. In most cases, the same type colonized both the hand and nose of a person. Despite the wide variety of types found, one strain colonized five persons and the second most common strain was associated with four food handlers. The predominant toxin produced was B, which was produced by the most common strain. The results showed that nasal sampling is a good way to detect S. aureus carriers, whereas hand sampling may fail to reveal carriers. The high proportion of enterotoxigenic strains show that a food handler harboring S. aureus must be considered a potential source of enterotoxigenic strains for airline meals.

Fundamental Considerations for Determining Cost Information in Higher Education.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

Costing has been recognized by business, financial, and other administrators in higher education as a valuable management tool. A growing interest in the determination of costs and their use revealed a lack of uniformity in cost definitions and cost determination methods and approaches in a language that was readily applicable to higher education.…

The New Independent Higher Education Institutions in China: Dilemmas and Challenges

ERIC Educational Resources Information Center

Zhang, Luxi; Adamson, Bob

2011-01-01

One impact of globalisation has been the expansion of higher education to meet changing current socio-economic and political requirements. This expansion places considerable stress on the public purse and many states have turned to alternative solutions. In China, a new phenomenon has emerged: independent higher education institutions that…

Assessment of the Higher Education Needs of Snohomish, Island, and Skagit Counties (SIS)

ERIC Educational Resources Information Center

Washington Higher Education Coordinating Board, 2006

2006-01-01

This report contains the Higher Education Coordinating Board's (HECB) assessment of the higher education needs in Snohomish, Skagit, and Island (SIS) Counties, and its recommendations to the legislature regarding those needs. The report contains two sections. Section I provides: (1) Primary conclusions and related considerations derived from the…

Alternative Providers of Higher Education: Issues for Policymakers. HEPI Report 90

ERIC Educational Resources Information Center

Fielden, John; Middlehurst, Robin

2017-01-01

In this HEPI paper, two authors with considerable expertise in evaluating higher education systems around the world assess higher education institutions that are not funded directly by taxpayers--known in the UK as alternative providers. Since the start of the century, alternative providers have been growing rapidly. This raises a number of…

The Government-Higher Education Institution Relationship: Theoretical Considerations from the Perspective of Agency Theory

ERIC Educational Resources Information Center

Kivisto, Jussi

2005-01-01

This article introduces the agency theory to the field of higher education research. By applying agency theory to the inter-organisational relationship between government and higher education institutions, it is possible to illustrate general problems facing control and governance in a more theoretical and analytical way. The conceptual arsenal…

[Ethical aspects of regenerative medicine, with special reference to embryonic stem cells and therapeutic cloning].

PubMed

Imura, Hiroo

2003-03-01

Regenerative medicine is expected to be new therapeutic means for treating incurable diseases but requires serious bioethical consideration. Embryonic stem(ES) cells, that are pleuripotent cells suitable to regenerative medicine, can be used in Japan for investigative use under a strict control by guide-lines. On the other hand, use of embryo produced by nuclear transfer has not been allowed in Japan and further serious consideration is required. Some other ethical aspects of regenerative medicine are also discussed.

Design considerations for the use of laser-plasma accelerators for advanced space radiation studies

NASA Astrophysics Data System (ADS)

Königstein, T.; Karger, O.; Pretzler, G.; Rosenzweig, J. B.; Hidding, B.; Hidding

2012-08-01

We present design considerations for the use of laser-plasma accelerators for mimicking space radiation and testing space-grade electronics. This novel application takes advantage of the inherent ability of laser-plasma accelerators to produce particle beams with exponential energy distribution, which is a characteristic shared with the hazardous relativistic electron flux present in the radiation belts of planets such as Earth, Saturn and Jupiter. Fundamental issues regarding laser-plasma interaction parameters, beam propagation, flux development, and experimental setup are discussed.

Turn over folders: a proven tool in succession management planning.

PubMed

Engells, Thomas E

2011-01-01

The dual challenges of succession management and succession management planning are considerable. A tool, the Turn over Folder, was introduced and described in detail as a useful first step in succession management planning. The adoption of that tool will not in itself produce a succession management plan, but it will orientate the organization and its members to the reality of succession management in all important leadership and critical positions. Succession management is an important consideration in all progressive organizations and well worth the effort.

Lunar base agriculture: Soils for plant growth

NASA Technical Reports Server (NTRS)

Ming, Douglas W. (Editor); Henninger, Donald L. (Editor)

1989-01-01

This work provides information on research and experimentation concerning various aspects of food production in space and particularly on the moon. Options for human settlement of the moon and Mars and strategies for a lunar base are discussed. The lunar environment, including the mineralogical and chemical properties of lunar regolith are investigated and chemical and physical considerations for a lunar-derived soil are considered. It is noted that biological considerations for such a soil include controlled-environment crop production, both hydroponic and lunar regolith-based; microorganisms and the growth of higher plants in lunar-derived soils; and the role of microbes to condition lunar regolith for plant cultivation. Current research in the controlled ecological life support system (CELSS) project is presented in detail and future research areas, such as the growth of higher research plants in CELSS are considered. Optimum plant and microbiological considerations for lunar derived soils are examined.

The missing calculation: the human cost.

PubMed

Green, Betty L

2007-01-01

The incursion of a foreign animal disease into any country produces devastating impacts on the country and on its producing industry. Although the associated financial losses to the country and its industry inevitably are calculated, the result in compensation to producers is often inadequate. Above and beyond the financial accounting calculations, however, there is a tremendously destructive and overwhelming impact that has been essentially ignored. That is the profound social impact and the real human cost to individual producers in the livestock industry and their families. Any decision to employ mass animal destruction as an animal disease control strategy must take this fundamental human element into full consideration. The author describes the consequences and depth of personal impact that the stamping-out approach has produced on affected individual livestock producers.

Arab petropolitics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al Sowayegh, A.

1984-01-01

An examination is given of the role and significance of oil power as used by the Arab producing countries to achieve political aims. The author, a Saudi official, describes the history of petropolitics, OPEC, and the Arab-Israeli conflict; explores the triangular relationship of oil companies, consuming countries, and producing countries; evaluates the policy considerations influencing Arab oil decisions and actions; and focuses in depth on the oil relationship between the Arab nations and the United States.

Climate Change and Sustainability Open Educational Resources: Lessons learned and challenges to tackle

NASA Astrophysics Data System (ADS)

Robinson, Zoe; Whitfield, Stephen; Gertisser, Ralf; Krause, Stefan; McKay, Deirdre; Pringle, Jamie; Szkornik, Katie; Waller, Richard

2010-05-01

The UK's Higher Education Academy Subject Centre for Geography, Earth and Environmental Sciences (GEES) is currently running a project entitled ‘C-Change in GEES: Open licensing of climate change and sustainability resources in the Geography, Earth and Environmental Sciences' as part of a national Open Educational Resource project. The C-Change project aims to explore the challenges involved in ‘repurposing' existing teaching materials on the topics of climate change and sustainability to make them open access. This project has produced an open access resource of diverse climate change and sustainability-related teaching materials across the subjects of Geography, Earth and Environmental Sciences. The process of repurposing existing face-to-face teaching resources requires consideration of a wide variety of issues including the Intellectual Property Rights (IPR) associated with images and other material included in the teaching resources, in addition to issues of quality, accessibility and usability of resources. Open access education is an issue that will have implications across the whole of the organizational structure of a university, from legal advisors with commitments to University research and enterprise activities, to the academics wishing to produce open access resources, through to all levels of senior management. The attitudes, concerns and openness to Open Educational Resources of stakeholders from all positions within a HE institution will have implications for the participation of that institution within the OER movement. The many barriers to the whole-scale adoption of Open Educational Resources within the UK Higher Education system and the willingness of UK Higher Education Institutions to engage in the OER movement include institutional perspectives on the IPR of teaching materials developed by members of staff within the institution and financial viability, in addition to more sceptical attitudes of potential contributors. Keele University is one of seven academic partners in the C-Change project and researchers at Keele have produced open access resources across a wide variety of sustainability-related themes from reconstructing past environments (for example sea-level change); regional impacts of predicted climate change (for example implications to permafrost environments); through to strategies for a sustainable future, including topics on greening business and engineering solutions. The resources range from PowerPoint presentations to image banks, reading lists, and suggestions for classroom and coursework activities. These resources are designed to be useful for other higher education practitioners developing teaching resources in this area. This presentation will present the range of open access resources developed at Keele University in addition to the lessons learnt in repurposing resources for open access, and a summary of different attitudes within Higher Education Institutions towards the OER movement.

CO-FIRING COAL: FEEDLOT AND LITTER BIOMASS (CFB AND CLB) FUELS IN PULVERIZED FUEL AND FIXED BED BURNERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalyan Annamalai; John Sweeten; Saqib Mukhtar

2003-08-28

Intensive animal feeding operations create large amounts of animal waste that must be safely disposed of in order to avoid environmental degradation. Cattle feedlots and chicken houses are two examples. In feedlots, cattle are confined to small pens and fed a high calorie grain-diet diet in preparation for slaughter. In chicken houses, thousands of chickens are kept in close proximity. In both of these operations, millions of tons of manure are produced every year. The manure could be used as a fuel by mixing it with coal in a 90:10 blend and firing it in an existing coal suspension firedmore » combustion systems. This technique is known as co-firing, and the high temperatures produced by the coal will allow the biomass to be completely combusted. Reburn is a process where a small percentage of fuel called reburn fuel is injected above the NO{sub x} producing, conventional coal fired burners in order to reduce NO{sub x}. The manure could also be used as reburn fuel for reducing NO{sub x} in coal fired plants. An alternate approach of using animal waste is to adopt the gasification process using a fixed bed gasifier and then use the gases for firing in gas turbine combustors. In this report, the cattle manure is referred to as feedlot biomass (FB) and chicken manure as litter biomass (LB). The report generates data on FB and LB fuel characteristics. Co-firing, reburn, and gasification tests of coal, FB, LB, coal: FB blends, and coal: LB blends and modeling on cofiring, reburn systems and economics of use of FB and LB have also been conducted. The biomass fuels are higher in ash, lower in heat content, higher in moisture, and higher in nitrogen and sulfur (which can cause air pollution) compared to coal. Small-scale cofiring experiments revealed that the biomass blends can be successfully fired, and NO{sub x} emissions will be similar to or lower than pollutant emissions when firing coal. Further experiments showed that biomass is twice or more effective than coal when used in a reburning process. Computer simulations for coal: LB blends were performed by modifying an existing computer code to include the drying and phosphorus (P) oxidation models. The gasification studies revealed that there is bed agglomeration in the case of chicken litter biomass due to its higher alkaline oxide content in the ash. Finally, the results of the economic analysis show that considerable fuel cost savings can be achieved with the use of biomass. In the case of higher ash and moisture biomass, the fuel cost savings is reduced.« less

Evaluation of three herbicide resistance genes for use in genetic transformations and for potential crop protection in algae production.

PubMed

Brueggeman, Andrew J; Kuehler, Daniel; Weeks, Donald P

2014-09-01

Genes conferring resistance to the herbicides glyphosate, oxyfluorfen and norflurazon were developed and tested for use as dominant selectable markers in genetic transformation of Chlamydomonas reinhardtii and as potential tools for the protection of commercial-scale algal production facilities against contamination by organisms sensitive to these broad-spectrum herbicides. A synthetic glyphosate acetyltransferase (GAT) gene, when fitted with a strong Chlamydomonas promoter, conferred a 2.7×-fold increase in tolerance to the EPSPS inhibitor, glyphosate, in transgenic cells compared with progenitor WT cells. A mutant Chlamydomonas protoporphyrinogen oxidase (protox, PPO) gene previously shown to produce an enzyme insensitive to PPO-inhibiting herbicides, when genetically engineered, generated transgenic cells able to tolerate up to 136× higher levels of the PPO inhibitor, oxyfluorfen, than nontransformed cells. Genetic modification of the Chlamydomonas phytoene desaturase (PDS) gene-based gene sequences found in various norflurazon-resistant organisms allowed production of transgenic cells tolerant to 40× higher levels of norflurazon than nontransgenic cells. The high efficiency of all three herbicide resistance genes in producing transgenic cells demonstrated their suitability as dominant selectable markers for genetic transformation of Chlamydomonas and, potentially, other eukaryotic algae. However, the requirement for high concentrations of glyphosate and its associated negative effects on cell growth rates preclude its consideration for use in large-scale production facilities. In contrast, only low doses of norflurazon and oxyfluorfen (~1.5 μm and ~0.1 μm, respectively) are required for inhibition of cell growth, suggesting that these two herbicides may prove effective in large-scale algal production facilities in suppressing growth of organisms sensitive to these herbicides. © 2014 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

PCDD/F and PCB in human serum of differently exposed population groups of an Italian city.

PubMed

Turrio-Baldassarri, Luigi; Abate, Vittorio; Battistelli, Chiara Laura; Carasi, Sergio; Casella, Marialuisa; Iacovella, Nicola; Indelicato, Annamaria; La Rocca, Cinzia; Scarcella, Carmelo; Alivernini, Silvia

2008-08-01

A chemical plant located in Brescia, an industrial city in North-Western Italy, produced polychlorobiphenyls (PCBs) during a 30-50 year period, causing widespread pollution of the surrounding agricultural area. This area contains several small farms, which principally produce veal meat for private consumption of the farmers' families. The pollution went undiscovered for many years, during which period contaminated food was regularly consumed. This paper reports the polychlorodibenzodioxin (PCDD), polychlorodibenzofuran (PCDF) and PCB levels of a serum sample pooled from the consumers of contaminated food, compared to six population groups of the city of Brescia. Four of these groups were selected in order to represent, respectively, the local general population and the residents of three zones of the polluted area, while the last two groups represented, respectively, the present and the former workers of the plant. One human milk sample from one of the consumers of contaminated food was also analyzed. Results show that the consumers of the contaminated food and the former workers of the plant display considerably higher levels than all other groups. The levels of general population and of all other groups were generally similar both to each other and to the range of literature values for unexposed populations. The respective contribution of PCDDs, PCDFs, mono-ortho and non-ortho PCBs (dioxin-like PCBs) to (Toxicity Equivalents) TEQ of the population groups of this study were also compared to literature data: the two groups with a high contamination level, together with the human milk sample, displayed a higher incidence of mono-ortho PCBs and a lower contribution of PCDD, possibly correlated with the source of contamination.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiltsev, V.

The idea of exploring collisions in the center-of-mass system to fully exploit the energy of the accelerated particles had been given serious consideration by the Norwegian engineer and inventor Rolf Wideröe, who had applied for a patent on the idea in 1943 (and got the patent in 1953 [1]) after considering the kinematic advantage of keeping the center of mass at rest to produce larger momentum transfers. Describing this advantage G.K.O’Neill, one of the collider pioneers, wrote in 1956 [2]: “…as accelerators of higher and higher energy are built, their usefulness is limited by the fact that the energy availablemore » for creating new particles is measured in the center-of-mass system of the target nucleon and the bombarding particle. In the relativistic limit, this energy rises only as the square root of the accelerator energy. However, if two particles of equal energy traveling in opposite directions could be made to collide, the available energy would be twice the whole energy of one particle...” Therefore, no kinetic energy is wasted by the motion of the center of mass of the system, and the available reaction energy E R = 2E beam (while a particle with the same energy E beam colliding with another particle of the mass m at rest produces only E R = (2E beam m)½ in the extreme relativistic case.) One can also add that the colliders are “cleaner” machines with respect to the fixed target ones since the colliding beams do not interact with the target materials. The other advantage is that it is much easier to organize collisions of beams composed of matter-antimatter particles, like in electron-positron and proton-antiproton colliders.« less

The first colliders: AdA, VEP-1 and Princeton-Stanford

NASA Astrophysics Data System (ADS)

Shiltsev, Vladimir

The idea of exploring collisions in the center-of-mass system to fully exploit the energy of the accelerated particles had been given serious consideration by the Norwegian engineer and inventor Rolf Wideröe, who applied for a patent on the idea in 1943 (and got the patent in 1953 [1]) after considering the kinematic advantage of keeping the center of mass at rest to produce larger momentum transfers. Describing this advantage, G. K. O'Neill, one of the collider pioneers, wrote in 1956 [2]: "... as accelerators of higher and higher energy are built, their usefulness is limited by the fact that the energy available for creating new particles is measured in the center-of-mass system of the target nucleon and the bombarding particle. In the relativistic limit, this energy rises only as the square root of the accelerator energy. However, if two particles of equal energy traveling in opposite directions could be made to collide, the available energy would be twice the whole energy of one particle ... " Therefore, no kinetic energy is wasted by the motion of the center of mass of the system, and the available reaction energy ER = 2Ebeam (while a particle with the same energy Ebeam colliding with another particle of the mass m at rest produces only ER = (2Ebeamm)1/2 in the extreme relativistic case). One can also add that the colliders are "cleaner" machines with respect to the fixed-target ones since the colliding beams do not interact with the target materials. The other advantage is that it is much easier to organize collisions of beams composed of matter-antimatter particles, like in electron-positron and proton-antiproton colliders...

Liquid chromatography-tandem mass spectrometry analysis allows the simultaneous characterization of C-glycosyl and O-glycosyl flavonoids in stingless bee honeys.

PubMed

Truchado, Pilar; Vit, Patricia; Ferreres, Federico; Tomas-Barberan, Francisco

2011-10-21

The analysis of the phytochemicals present in stingless bee honey samples has been a difficult task due to the small amounts of samples available and to the complexity of the phytochemical composition that often combines flavonoid glycosides and aglycones. Honey samples produced in Venezuela from Melipona species were analyzed using a combination of solid-phase extraction and HPLC-DAD-MSn/ESI methodologies with specific study of the fragment ions produced from flavonoid glycosides. The analyses revealed that flavonoid glycosides were the main constituents. The honey samples analyzed contained a consistent flavonoid pattern composed of flavone-C-glycosides, flavonol-O-glycosides and flavonoid aglycones. The HPLC-DAD-MSn/ESI analysis and the study of the fragment ions obtained allowed the characterization and quantification for the first time of five apigenin-di-C-glycosides, and ten quercetin, kaempferol and isorhamnetin O-glycosides (di- and tri- glycosides), and the aglycones pinobanksin, quercetin, kaempferol and isorhamnetin in the different samples. This is the first report of flavonoid-C-glycosides in honey. The results show that the content of flavonoid-glycosides (mean values of 2712 μg/100 g) in stingless bee honeys is considerably higher than the content of flavonoid aglycones (mean values of 315 μg/100 g). This differs from previous studies on Apis mellifera honeys that consistently showed much higher aglycone content and smaller flavonoid glycoside content. The occurrence of relevant amounts of flavonoid glycosides, and particularly C-glycosides, in stingless bee honeys could be associated with their putative anticataract properties. Copyright © 2011 Elsevier B.V. All rights reserved.

Postoperative Analgesic Efficacy of Bilateral Transversus Abdominis Plane Block in Patients Undergoing Midline Colorectal Surgeries Using Ropivacaine: A Randomized, Double-blind, Placebo-controlled Trial.

PubMed

Qazi, Nahida; Bhat, Wasim Mohammad; Iqbal, Malik Zaffar; Wani, Anisur Rehman; Gurcoo, Showkat A; Rasool, Sahir

2017-01-01

Ultrasound-guided transversus abdominis plane (TAP) block is done as a part of multimodal analgesia for pain relief after abdominal surgeries. This prospective randomized, double-blind, placebo-controlled trial was conducted to evaluate the postoperative analgesic efficacy of bilateral TAP block in patients undergoing midline colorectal surgeries using ropivacaine. Eighty patients scheduled for elective colorectal surgeries involving midline abdominal wall incision under general anesthesia were enrolled in this prospective randomized controlled trial. Group A received TAP block with 20 ml of 0.2% ropivacaine on either side of the abdominal wall, and Group B received 20 ml of normal saline. The time to request for rescue analgesia, total analgesic consumption in 24 h, and satisfaction with the anesthetic technique were assessed. The mean visual analog scale scores at rest and on coughing were higher in control group ( P > 0.05). Time (min) to request for the first rescue analgesia was prolonged in study group compared to control group ( P < 0.001). The total tramadol consumption in 24 h postoperatively was significantly high in control group ( P < 0.001). Nausea/vomiting was more common in control group ( P > 0.05). The level of satisfaction concerning postoperative pain control/anesthetic technique was higher in study group ( P < 0.001). TAP block produces effective and prolonged postoperative analgesia in patients undergoing midline colorectal surgery. It is a technically simple block to perform with a high margin of safety. It produces a considerable reduction in mean intravenous postoperative tramadol requirements, reduction in postoperative pain scores, and increased time to first request for further analgesia, both at rest and on movement.

Antioxidant phytochemicals in fresh produce: exploitation of genotype variation and advancements in analytical protocols

NASA Astrophysics Data System (ADS)

Manganaris, George A.; Goulas, Vlasios; Mellidou, Ifigeneia; Drogoudi, Pavlina

2017-12-01

Horticultural commodities (fruit and vegetables) are the major dietary source of several bioactive compounds of high nutraceutical value for humans, including polyphenols, carotenoids and vitamins. The aim of the current review was dual. Firstly, towards the eventual enhancement of horticultural crops with bio-functional compounds, the natural genetic variation in antioxidants found in different species and cultivar/genotypes is underlined. Notably, some landraces and/or traditional cultivars have been characterized by substantially higher phytochemical content, i.e. small tomato of Santorini island (cv. ‘Tomataki Santorinis’) possesses appreciably high amounts of ascorbic acid. The systematic screening of key bioactive compounds in a wide range of germplasm for the identification of promising genotypes and the restoration of key gene fractions from wild species and landraces may help in reducing the loss of agro-biodiversity, creating a healthier ‘gene pool’ as the basis of future adaptation. Towards this direction, large scale comparative studies in different cultivars/genotypes of a given species provide useful insights about the ones of higher nutritional value. Secondly, the advancements in the employment of analytical techniques to determine the antioxidant potential through a convenient, easy and fast way are outlined. Such analytical techniques include electron paramagnetic resonance (EPR) and infrared (IR) spectroscopy, electrochemical and chemometric methods, flow injection analysis (FIA), optical sensors and high resolution screening (HRS). Taking into consideration that fruits and vegetables are complex mixtures of water- and lipid-soluble antioxidants, the exploitation of chemometrics to develop “omics” platforms (i.e. metabolomics, foodomics) is a promising tool for researchers to decode and/or predict antioxidant activity of fresh produce. For industry, the use of cheap and rapid optical sensors and IR spectroscopy is recommended to estimate the antioxidant activity, hence legislation does not allow its correlation with health claims.

Antioxidant Phytochemicals in Fresh Produce: Exploitation of Genotype Variation and Advancements in Analytical Protocols.

PubMed

Manganaris, George A; Goulas, Vlasios; Mellidou, Ifigeneia; Drogoudi, Pavlina

2017-01-01

Horticultural commodities (fruit and vegetables) are the major dietary source of several bioactive compounds of high nutraceutical value for humans, including polyphenols, carotenoids and vitamins. The aim of the current review was dual. Firstly, toward the eventual enhancement of horticultural crops with bio-functional compounds, the natural genetic variation in antioxidants found in different species and cultivars/genotypes is underlined. Notably, some landraces and/or traditional cultivars have been characterized by substantially higher phytochemical content, i.e., small tomato of Santorini island (cv. "Tomataki Santorinis") possesses appreciably high amounts of ascorbic acid (AsA). The systematic screening of key bioactive compounds in a wide range of germplasm for the identification of promising genotypes and the restoration of key gene fractions from wild species and landraces may help in reducing the loss of agro-biodiversity, creating a healthier "gene pool" as the basis of future adaptation. Toward this direction, large scale comparative studies in different cultivars/genotypes of a given species provide useful insights about the ones of higher nutritional value. Secondly, the advancements in the employment of analytical techniques to determine the antioxidant potential through a convenient, easy and fast way are outlined. Such analytical techniques include electron paramagnetic resonance (EPR) and infrared (IR) spectroscopy, electrochemical, and chemometric methods, flow injection analysis (FIA), optical sensors, and high resolution screening (HRS). Taking into consideration that fruits and vegetables are complex mixtures of water- and lipid-soluble antioxidants, the exploitation of chemometrics to develop "omics" platforms (i.e., metabolomics, foodomics) is a promising tool for researchers to decode and/or predict antioxidant activity of fresh produce. For industry, the use of optical sensors and IR spectroscopy is recommended to estimate the antioxidant activity rapidly and at low cost, although legislation does not allow its correlation with health claims.

Aqueous-phase oxidation of green leaf volatiles by hydroxyl radical as a source of SOA: Product identification from methyl jasmonate and methyl salicylate oxidation

NASA Astrophysics Data System (ADS)

Hansel, Amie K.; Ehrenhauser, Franz S.; Richards-Henderson, Nicole K.; Anastasio, Cort; Valsaraj, Kalliat T.

2015-02-01

Green leaf volatiles (GLVs) are a group of biogenic volatile organic compounds (BVOCs) released into the atmosphere by vegetation. BVOCs produce secondary organic aerosol (SOA) via gas-phase reactions, but little is known of their aqueous-phase oxidation as a source of SOA. GLVs can partition into atmospheric water phases, e.g., fog, mist, dew or rain, and be oxidized by hydroxyl radicals (˙OH). These reactions in the liquid phase also lead to products that have higher molecular weights, increased polarity, and lower vapor pressures, ultimately forming SOA after evaporation of the droplet. To examine this process, we investigated the aqueous, ˙OH-mediated oxidation of methyl jasmonate (MeJa) and methyl salicylate (MeSa), two GLVs that produce aqueous-phase SOA. High performance liquid chromatography/electrospray ionization mass spectrometry (HPLC-ESI-MS) was used to monitor product formation. The oxidation products identified exhibit higher molecular mass than their parent GLV due to either dimerization or the addition of oxygen and hydroxyl functional groups. The proposed structures of potential products are based on mechanistic considerations combined with the HPLC/ESI-MS data. Based on the structures, the vapor pressure and the Henry's law constant were estimated with multiple methods (SPARC, SIMPOL, MPBPVP, Bond and Group Estimations). The estimated vapor pressures of the products identified are significantly (up to 7 orders of magnitude) lower than those of the associated parent compounds, and therefore, the GLV oxidation products may remain as SOA after evaporation of the water droplet. The contribution of the identified oxidation products to SOA formation is estimated based on measured HPLC-ESI/MS responses relative to previous aqueous SOA mass yield measurements.

Postoperative Analgesic Efficacy of Bilateral Transversus Abdominis Plane Block in Patients Undergoing Midline Colorectal Surgeries Using Ropivacaine: A Randomized, Double-blind, Placebo-controlled Trial

PubMed Central

Qazi, Nahida; Bhat, Wasim Mohammad; Iqbal, Malik Zaffar; Wani, Anisur Rehman; Gurcoo, Showkat A.; Rasool, Sahir

2017-01-01

Background: Ultrasound-guided transversus abdominis plane (TAP) block is done as a part of multimodal analgesia for pain relief after abdominal surgeries. This prospective randomized, double-blind, placebo-controlled trial was conducted to evaluate the postoperative analgesic efficacy of bilateral TAP block in patients undergoing midline colorectal surgeries using ropivacaine. Materials and Methods: Eighty patients scheduled for elective colorectal surgeries involving midline abdominal wall incision under general anesthesia were enrolled in this prospective randomized controlled trial. Group A received TAP block with 20 ml of 0.2% ropivacaine on either side of the abdominal wall, and Group B received 20 ml of normal saline. The time to request for rescue analgesia, total analgesic consumption in 24 h, and satisfaction with the anesthetic technique were assessed. Results: The mean visual analog scale scores at rest and on coughing were higher in control group (P > 0.05). Time (min) to request for the first rescue analgesia was prolonged in study group compared to control group (P < 0.001). The total tramadol consumption in 24 h postoperatively was significantly high in control group (P < 0.001). Nausea/vomiting was more common in control group (P > 0.05). The level of satisfaction concerning postoperative pain control/anesthetic technique was higher in study group (P < 0.001). Conclusion: TAP block produces effective and prolonged postoperative analgesia in patients undergoing midline colorectal surgery. It is a technically simple block to perform with a high margin of safety. It produces a considerable reduction in mean intravenous postoperative tramadol requirements, reduction in postoperative pain scores, and increased time to first request for further analgesia, both at rest and on movement. PMID:28928585

Metabolic Profiling and Identification of Shikonins in Root Periderm of Two Invasive Echium spp. Weeds in Australia.

PubMed

Skoneczny, Dominik; Weston, Paul A; Zhu, Xiaocheng; Gurr, Geoff M; Callaway, Ragan M; Barrow, Russel A; Weston, Leslie A

2017-02-21

Metabolic profiling can be successfully implemented to analyse a living system's response to environmental conditions by providing critical information on an organism's physiological state at a particular point in time and allowing for both quantitative and qualitative assessment of a specific subset(s) of key metabolites. Shikonins are highly reactive chemicals that affect various cell signalling pathways and possess antifungal, antibacterial and allelopathic activity. Based on previous bioassay results, bioactive shikonins, are likely to play important roles in the regulation of rhizosphere interactions with neighbouring plants, microbes and herbivores. An effective platform allowing for rapid identification and accurate profiling of numerous structurally similar, difficult-to-separate bioactive isohexenylnaphthazarins (shikonins) was developed using UHPLC Q-TOF MS. Root periderm tissues of the invasive Australian weeds Echium plantagineum and its congener E. vulgare were extracted overnight in ethanol for shikonin profiling. Shikonin production was evaluated at seedling, rosette and flowering stages. Five populations of each species were compared for qualitative and quantitative differences in shikonin formation. Each species showed little populational variation in qualitative shikonin production; however, shikonin was considerably low in one population of E. plantagineum from Western New South Wales . Seedlings of all populations produced the bioactive metabolite acetylshikonin and production was upregulated over time. Mature plants of both species produced significantly higher total levels of shikonins and isovalerylshikonin > dimethylacrylshikonin > shikonin > acetylshikonin in mature E. plantagineum . Although qualitative metabolic profiles in both Echium spp. were nearly identical, shikonin abundance in mature plant periderm was approximately 2.5 times higher in perennial E. vulgare extracts in comparison to those of the annual E. plantagineum. These findings contribute to our understanding of the biosynthesis of shikonins in roots of two related invasive plants and their expression in relation to plant phenological stage.

Ammonia in ground water from the Mississippi River alluvium, Fort Madison, Iowa

USGS Publications Warehouse

Linhart, S. Mike

2001-01-01

Water samples were collected from three municipal wells, two industrial wells, one watersupply well at the Iowa State Penitentiary, one domestic well, two creeks, and the Mississippi River. Tritium analytical results indicate that the time of recharge was after 1953 for water from the municipal wells (where tritium samples were collected). The ammonia concentration, 5.1 milligrams per liter, was considerably higher in ground water collected from well Fort Madison #4 compared to samples collected from other wells. The dissolved organic carbon concentration was also highest in ground water collected from well Fort Madison #4 (5.5 milligrams per liter) although samples from other wells were also relatively high, 2.6 to 5.3 milligrams per liter. The most likely process producing the high ammonia concentration in ground water in the vicinity of well Fort Madison #4 is decomposition of organic matter (ammonification). Nitrogen isotope values, when compared to nitrogen isotope values found in ground water in the vicinity of some of the other wells, indicate the possibility that a higher percentage of the ammonia found in ground water in the vicinity of well Fort Madison #4 may be from human and(or) other animal wastes. Higher concentrations of dissolved phosphorus, orthophosphate, and a higher chloride-to-sodium mole ratio found in ground water sampled from well Fort Madison #4 could be indicative of a sewage or septic source. Potential sources include existing or abandoned septic systems, leaking sanitary sewer lines, commercial or residential waste-disposal sites, and agricultural runoff upgradient from well Fort Madison #4, or possibly, bed sediments of the Mississippi River.

Altered Tuber Yield in Genetically Modified High-Amylose and Oil Potato Lines Is Associated With Changed Whole-Plant Nitrogen Economy

PubMed Central

Pourazari, Fereshteh; Andersson, Mariette; Weih, Martin

2018-01-01

Breeding for improved crop quality traits can affect non-target traits related to growth and resource use, and these effects may vary in different cultivation conditions (e. g., greenhouse vs. field). The objectives of this study are to investigate the growth and whole-plant nitrogen (N) economy of two genetically modified (GM) potato lines compared to their non-GM parental varieties and when grown in different cultivation conditions. A high-amylose GM potato line and its parent were grown under field and greenhouse conditions for one growing season in Sweden; and a GM oil potato line and its parent were grown in greenhouse conditions only. Tuber yield, above ground biomass, N uptake efficiency and other plant N economy traits were assessed. In both cultivation conditions, the GM lines produced between 1.5 and two times more tubers as compared with their parents. In the greenhouse, fresh tuber yield and N uptake efficiency were unaffected by the genetic modifications, but the GM-lines produced less tuber biomass per plant-internal N compared to their parents. In the field, the fresh tuber yield was 40% greater in the high-amylose line as compared with its parent; the greater fresh tuber yield in the high-amylose GM line was accomplished by higher water allocation to the harvested tubers, and associated with increased N recovery from soil (+20%), N uptake efficiency (+53%), tuber N content (+20%), and N accumulation (+120%) compared with the non-GM parent. The cultivation conditions influenced the yield and N economy. For example, the final fresh above-ground plant biomass and N pool were considerably higher in the greenhouse conditions, whilst the tuber yield was higher in the field conditions. In conclusion, the genetic modification inducing high accumulation of amylose in potato tubers affected several non-target traits related to plant N economy, and increased the plant N uptake and accumulation efficiency of the field-grown plants. Due to strongly increased plant N accumulation compared to the parental variety, the cultivation of the high-amylose line is expected to require higher N fertilization rates. However, starch productivity per unit land area or soil N still is expected to be higher in the high-amylose line. PMID:29599796

Reauthorizing the Higher Education Act.

ERIC Educational Resources Information Center

Lee, John B.

1983-01-01

Reviews the process of reauthorizing the Higher Education Act for postsecondary education, beginning with hearings and program reviews. Discusses issues such as political considerations, program simplification, awarding excellence, and availability of information. Pressure groups and budget factors also influence the outcome of the legislative…

An assessment of producer precision dairy farming technology use, prepurchase considerations, and usefulness.

PubMed

Borchers, M R; Bewley, J M

2015-06-01

An online survey to identify producer precision dairy farming technology perception was distributed in March 2013 through web links sent to dairy producers through written publications and e-mail. Responses were collected in May 2013 and 109 surveys were used in statistical analysis. Producers were asked to select parameters monitored by technologies on their farm from a predetermined list and 68.8% of respondents indicated technology use on their dairies (31.2% of producers not using technologies). Daily milk yield (52.3%), cow activity (41.3%), and mastitis (25.7%) were selected most frequently. Producers were also asked to score the same list of parameters on usefulness using a 5-point scale (1=not useful and 5=useful). Producers indicated (mean ± SE) mastitis (4.77±0.47), standing estrus (4.75±0.55), and daily milk yield (4.72±0.62) to be most useful. Producers were asked to score considerations taken before deciding to purchase a precision dairy farming technology from a predetermined list (1=not important and 5=important). Producers indicated benefit-to-cost ratio (4.57±0.66), total investment cost (4.28±0.83), and simplicity and ease of use (4.26±0.75) to be most important when deciding whether to implement a technology. Producers were categorized based on technology use (using technology vs. not using technology) and differed significantly across technology usefulness scores, daily milk yield (using technologies: 4.83±0.07 vs. not using technologies: 4.50±0.10), and standing estrus (using technologies: 4.68±0.06 vs. not using technologies: 4.91±0.09). The same categories were used to evaluate technology use effect on prepurchase technology selection criteria and availability of local support (using technologies: 4.25±0.11 vs. not using technologies: 3.82±0.16) differed significantly. Producer perception of technology remains relatively unknown to manufacturers. Using this data, technology manufacturers may better design and market technologies to producer need. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Wilderness in Higher Education: Considerations for Educating Professionals for the Next 50 Years

ERIC Educational Resources Information Center

Taff, Derrick; Dvorak, Robert G.; Dawson, Chad P.; McCool, Stephen F.; Appel, Peter A.

2016-01-01

Over the past 50 years, an evolution has occurred in the instruction of wilderness professionals and practitioners within the higher education realm. The National Wilderness Conference, commemorating the 50th anniversary of the Wilderness Act, provided a timely opportunity to discuss the current and future role of higher education and wilderness…

Total Quality Management and the Higher Education Environment: Impact on Educational Leadership Theory and Practice.

ERIC Educational Resources Information Center

Munoz, Marco A.

This paper explores Total Quality Management (TQM) as an organizational theory applied to educational administration of higher education. The first part of the paper describes the principles of TQM, and the second part considers TQM in higher education. The third section is a general conclusion that takes into consideration the leadership…

Widening Equity and Retaining Efficiency: Considerations from the IBSA Southern Coalface

ERIC Educational Resources Information Center

Akoojee, Salim; Nkomo, Mokubung

2011-01-01

Access to higher education is a key challenge of the 21st century state. The link between higher education and personal and socio-economic development has intensified the need for ensuring that greater numbers of citizens have expanded access to and have been provided with quality higher education. The article seeks to explore how initiatives for…

State Legislative Developments on Campus Sexual Violence: Issues in the Context of Safety

ERIC Educational Resources Information Center

Morse, Andrew; Sponsler, Brian A.; Fulton, Mary

2015-01-01

NASPA--Student Affairs Administrators in Higher Education and Education Commission of the States (ECS) have partnered to address legislative developments and offer considerations for leaders in higher education and policy on two top-level safety issues facing the higher education community: campus sexual violence and guns on campus. The first in a…

Profiling Approaches to Teaching in Higher Education: A Cluster-Analytic Study

ERIC Educational Resources Information Center

Stes, Ann; Van Petegem, Peter

2014-01-01

Teaching approaches in higher education have already been the subject of a considerable body of research. An important contribution was Prosser and Trigwell's development of the Approaches to Teaching Inventory (ATI). The present study aims to map out the approaches to teaching profiles of teachers in higher education on the basis of their scores…

"Modern" Governance and Codes of Conduct in Dutch Higher Education

ERIC Educational Resources Information Center

de Boer, Harry; Goedegebuure, Leo

2007-01-01

As one of the first countries in Europe to do so, The Netherlands moved towards a new relationship between the state and the higher education institutions in the mid-1980s. Autonomy, quality and accountability were key considerations in this move. In 2006 the Dutch government proposed another radical innovation in its approach to higher education…

Characterizing the Motivational Orientation of Students in Higher Education: A Naturalistic Study in Three Hong Kong Universities

ERIC Educational Resources Information Center

Kember, David; Hong, Celina; Ho, Amber

2008-01-01

Background: Consideration of motivation in higher education has often been drawn upon theories and research that were based upon school or workplace studies. Aims: This paper reports an open naturalistic study to better characterize the motivational orientation of students in higher education. Method: Open semi-structured individual interviews…

Reconsidering the Social and Economic Purposes of Higher Education

ERIC Educational Resources Information Center

McArthur, Jan

2011-01-01

In this article I seek to reconsider the social and economic purposes of higher education. It begins with the premise that there appears to be a general trend towards governments positioning higher education primarily in terms of the economic role that it can fulfil. Such a trend, however, has attracted considerable criticism. In this article I…

Global Learning through Difference: Considerations for Teaching, Learning, and the Internationalization of Higher Education

ERIC Educational Resources Information Center

Kahn, Hilary E.; Agnew, Melanie

2017-01-01

By clarifying what global learning is and how it is essential to higher education, this article considers what global learning provides for teaching, learning, and internationalization in higher education. It demonstrates how the global nature of knowledge and learning in the 21st century requires a re-definition of classrooms and learning…

Peripheral antinociceptive effects of the cyclic endomorphin-1 analog c[YpwFG] in a mouse visceral pain model.

PubMed

Bedini, Andrea; Baiula, Monica; Gentilucci, Luca; Tolomelli, Alessandra; De Marco, Rossella; Spampinato, Santi

2010-11-01

We previously described a novel cyclic endomorphin-1 analog c[Tyr-D-Pro-D-Trp-Phe-Gly] (c[YpwFG]), acting as a mu-opioid receptor (MOR) agonist. This study reports that c[YpwFG] is more lipophilic and resistant to enzymatic hydrolysis than endomorphin-1 and produces preemptive antinociception in a mouse visceral pain model when injected intraperitoneally (i.p.) or subcutaneously (s.c.) before 0.6% acetic acid, employed to evoke abdominal writhing (i.p. ED(50)=1.24 mg/kg; s.c. ED(50)=2.13 mg/kg). This effect is reversed by the selective MOR antagonist β-funaltrexamine and by a high dose of the mu(1)-opioid receptor-selective antagonist naloxonazine. Conversely, the kappa-opioid receptor antagonist nor-binaltorphimine and the delta-opioid receptor antagonist naltrindole are ineffective. c[YpwFG] produces antinociception when injected i.p. after acetic acid (ED(50)=4.80 mg/kg), and only at a dose of 20mg/kg did it elicit a moderate antinociceptive response in the mouse, evaluated by the tail flick assay. Administration of a lower dose of c[YpwFG] (10mg/kg i.p.) apparently produces a considerable part of antinociception on acetic acid-induced writhes through peripheral opioid receptors as this action is fully prevented by i.p. naloxone methiodide, which does not readily cross the blood-brain barrier; whereas this opioid antagonist injected intracerebroventricularly (i.c.v.) is not effective. Antinociception produced by a higher dose of c[YpwFG] (20mg/kg i.p.) is partially reversed by naloxone methiodide i.c.v. administered. Thus, only at the dose of 20mg/kg c[YpwFG] can produce antinociception through both peripheral and central opioid receptors. In conclusion, c[YpwFG] displays sufficient metabolic stability to be effective after peripheral administration and demonstrates the therapeutic potential of endomorphin derivatives as novel analgesic agents to control visceral pain. Copyright © 2010 Elsevier Inc. All rights reserved.

Maximum performance of solar heat engines: Discussion of thermodynamic availability and other second law considerations and their implications

NASA Astrophysics Data System (ADS)

Boehm, R. F.

1985-09-01

A review of thermodynamic principles is given in an effort to see if these concepts may indicate possibilities for improvements in solar central receiver power plants. Aspects related to rate limitations in cycles, thermodynamic availability of solar radiation, and sink temperature considerations are noted. It appears that considerably higher instantaneous plant efficiencies are possible by raising the maximum temperature and lowering the minimum temperature of the cycles. Of course, many practical engineering problems will have to be solved to realize the promised benefits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finzi, S.; Marchetti, C.; Renzoni, R.

The first of four reports on the design of a plant for producing 99.75 mole% D/sub 2/O from preconcentrated solutions is presented. The isotopic and chemicophysical design is treated, all the necessary theoretical considerations for the calculations being given. (T.R.H.)

Aquacells — Flagellates under long-term microgravity and potential usage for life support systems

NASA Astrophysics Data System (ADS)

Häder, Donat-P.; Richter, Peter R.; Strauch, S. M.; Schuster, M.

2006-09-01

The motile behavior of the unicellular photosynthetic flagellate Euglena gracilis was studied during a two-week mission on the Russian satellite Foton M2. The precision of gravitactic orientation was high before launch and, as expected, the cells were unoriented during microgravity. While after previous short-term TEXUS flights the precision of orientation was as high as before launch, it took several hours for the organisms to regain their gravitaxis. Also the percentage of motile cells and the swimming velocity of the remaining motile cells were considerably lower than in the ground control. In preparatory experiments the flagellate Euglena was shown to produce considerable amounts of photosynthetically generated oxygen. In a coupling experiment in a prototype for a planned space mission on Foton M3, the photosynthetic producers were shown to supply sufficient amounts of oxygen to a fish compartment with 35 larval cichlids, Oreochromis mossambicus.

Alternate propellant program, phase 1

NASA Technical Reports Server (NTRS)

Anderson, F. A.; West, W. R.

1979-01-01

Candidate propellant systems for the shuttle booster solid rocket motor (SRM), which would eliminate, or greatly reduce, the amount of HCl produced in the exhaust of the shuttle SRM were investigated. Ammonium nitrate was selected for consideration as the main oxidizer, with ammonium perchlorate and the nitramine, cyclo-tetramethylene-tetranitramine as secondary oxidizers. The amount of ammonium perchlorate used was limited to an amount which would produce an exhaust containing no more than 3% HCl.

Managing Mergers--Governancing Institutional Integration

ERIC Educational Resources Information Center

Frølich, Nicoline; Trondal, Jarle; Caspersen, Joakim; Reymert, Ingvild

2016-01-01

Despite striking similarities, the adoption and implementation of policy shifts regarding higher education governance vary considerably across the globe, suggesting a mixed picture of diversification and isomorphism both within and across national higher education systems. By unpacking one particular structural reform process, this paper focuses…

Quantum machine learning.

PubMed

Biamonte, Jacob; Wittek, Peter; Pancotti, Nicola; Rebentrost, Patrick; Wiebe, Nathan; Lloyd, Seth

2017-09-13

Fuelled by increasing computer power and algorithmic advances, machine learning techniques have become powerful tools for finding patterns in data. Quantum systems produce atypical patterns that classical systems are thought not to produce efficiently, so it is reasonable to postulate that quantum computers may outperform classical computers on machine learning tasks. The field of quantum machine learning explores how to devise and implement quantum software that could enable machine learning that is faster than that of classical computers. Recent work has produced quantum algorithms that could act as the building blocks of machine learning programs, but the hardware and software challenges are still considerable.

Optical processing for semiconductor device fabrication

NASA Technical Reports Server (NTRS)

Sopori, Bhushan L.

1994-01-01

A new technique for semiconductor device processing is described that uses optical energy to produce local heating/melting in the vicinity of a preselected interface of the device. This process, called optical processing, invokes assistance of photons to enhance interface reactions such as diffusion and melting, as compared to the use of thermal heating alone. Optical processing is performed in a 'cold wall' furnace, and requires considerably lower energies than furnace or rapid thermal annealing. This technique can produce some device structures with unique properties that cannot be produced by conventional thermal processing. Some applications of optical processing involving semiconductor-metal interfaces are described.

Quantum machine learning

NASA Astrophysics Data System (ADS)

Biamonte, Jacob; Wittek, Peter; Pancotti, Nicola; Rebentrost, Patrick; Wiebe, Nathan; Lloyd, Seth

2017-09-01

Fuelled by increasing computer power and algorithmic advances, machine learning techniques have become powerful tools for finding patterns in data. Quantum systems produce atypical patterns that classical systems are thought not to produce efficiently, so it is reasonable to postulate that quantum computers may outperform classical computers on machine learning tasks. The field of quantum machine learning explores how to devise and implement quantum software that could enable machine learning that is faster than that of classical computers. Recent work has produced quantum algorithms that could act as the building blocks of machine learning programs, but the hardware and software challenges are still considerable.

Undisciplining Knowledge Production: Development Driven Higher Education in South Africa

ERIC Educational Resources Information Center

Winberg, Christine

2006-01-01

South African higher education institutions are increasingly under scrutiny to produce knowledge that is more relevant to South Africa's social and economic needs, more representative of the diversity of its knowledge producers, and more inclusive of the variety of the sites where knowledge is produced. Only a small percentage of South Africans…

SoTL in the LIS Classroom: Helping Future Academic Librarians Become More Engaged Teachers

ERIC Educational Resources Information Center

McNiff, Lindsay; Hays, Lauren

2017-01-01

In this paper, we share background and key considerations of the Scholarship of Teaching and Learning (SoTL), and propose introducing library and information science (LIS) students to SoTL as a way to acquaint them with the higher education teaching profession. Throughout the article, we employ reflection as the primary consideration and support…

Clinical characteristics and airway inflammation profile of COPD persistent sputum producers.

PubMed

Khurana, S; Ravi, A; Sutula, J; Milone, R; Williamson, R; Plumb, J; Vestbo, J; Singh, D

2014-12-01

COPD patients with chronic bronchitis include a subgroup with persistent sputum production on most or every day. We hypothesized that COPD patients with persistent sputum production have a different profile of airway inflammation, and more severe clinical characteristics. To compare the airway inflammation profile and clinical characteristics of COPD persistent and non-persistent sputum producers. COPD persistent sputum producers (n = 26) and non-persistent sputum producers (n = 26) underwent sputum induction and pulmonary function tests. Exacerbation history was recorded; the St. George's Respiratory Questionnaire, Modified Medical Research Council Dyspnoea scale and COPD Assessment Tool were completed. 33 COPD patients provided sputum for bacteriology. Persistent sputum producers had lower post-bronchodilator FEV1% predicted (p = 0.01), diffusion capacity (p = 0.04), 6 min walk test distance (p = 0.05), and higher closing volume (p = 0.01), BODE index (p = 0.01), rate of bacterial colonization (p = 0.004) and exacerbations (p = 0.03) compared to non-persistent sputum producers. The mean SGRQ and CAT scores were higher in persistent sputum producers (p = 0.01 and 0.03 respectively). Sputum neutrophil and eosinophil total cell counts were higher in persistent sputum producers (p = 0.02 and 0.05 respectively). Sputum levels of eotaxin (p = 0.02), MCP-1 (p = 0.02), TNF-α (p = 0.03) and IL-6 (p = 0.05) were higher in persistent sputum producers. COPD persistent sputum producers have more severe clinical characteristics and increased concentrations of some inflammatory mediators in the airways.

BREEDING EXPERIMENTS ON MEDICINAL PLANTS. 27. ROENTGEN MUTATIONS AND ACTIVE SUBSTANCE CONTENT IN DATURA (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinegger, E.; Zbinden, F.

1961-10-01

The changes in alkaloid content of the Datura stramonium var. godronii are considered. About 1000 plants cultivated from irradiated and nonlrradiated seeds were examined for changes in total alkaloid content. In about 1.5% of the plants the alknloid content changed considerably, the decreases being more marked than the increases. Completely alkaloid-free plants, however, were not produced, in spite of the fact that occasionally the alkaloid content was so low that it could no longer be determined. There were two groups of mutants with increased alkaloid content. Some pharmaceutically important plants with higher total alkaloid production per plant and with loweredmore » alkaloid drug yield had double chromosome numbers and proved to be autotetraploid. However, the alkaloid contents of these plants were not higher than those of the artificially cultivated polyploids. The alkaloid content was evaluated by paper chromatography, which made possible the extraction of minute amounts of water- soluble basic amines as well as preventing the secondary changes of alkaloids. New alkaloids were not detected. Scopolamine content was found to decrease with age of the plant. In some mutants a reciprocal change in the amounts of some alkaloids could be demonstrated. A mutant containing a large amount of cuskohygrine was detected. (BBB)« less

Self-concept and body image in persons who are spinal cord injured with and without lower limb amputation.

PubMed

Yetzer, Elizabeth A; Schandler, Steven; Root, Tammy L; Turnbaugh, Kathleen

2003-01-01

Spinal cord injury (SCI) requires considerable psychological adjustment to physical limitations and complications. One particularly severe complication of SCI is foot skin breakdown, which can result in lower limb amputation. Relative to SCI adjustment, amputation may produce one of two psychological outcomes: (a.) the fragile self-concept of a person with SCI may be reduced further by limb amputation, or (b.) amputation of a diseased, nonfunctional limb may be associated with restored health and improved self-concept. To better understand the effects of amputation, 26 males with SCI, 11 of whom had a lower limb amputation, were administered the Tennessee Self-Concept Scale (TCS) and the Personal Body Attractiveness Scale (PBAS). The study revealed that persons with SCI with amputation had higher Physical and Total self-concept scores on the TSCS, showing a slightly more positive self-concept. On the PBAS, although there were no significant differences in the scores for the legs, ankles, or feet, the persons with SCI with amputation had higher score on the Satisfaction subscale, indicating a slightly greater satisfaction with their thigh in their body image. Implications for future study include replication with larger sample sizes, inclusion of women in the sample, and a longitudinal study. Several nursing interventions are identified.

Non-Targeted Effects Models Predict Significantly Higher Mars Mission Cancer Risk than Targeted Effects Models

DOE PAGES

Cucinotta, Francis A.; Cacao, Eliedonna

2017-05-12

Cancer risk is an important concern for galactic cosmic ray (GCR) exposures, which consist of a wide-energy range of protons, heavy ions and secondary radiation produced in shielding and tissues. Relative biological effectiveness (RBE) factors for surrogate cancer endpoints in cell culture models and tumor induction in mice vary considerable, including significant variations for different tissues and mouse strains. Many studies suggest non-targeted effects (NTE) occur for low doses of high linear energy transfer (LET) radiation, leading to deviation from the linear dose response model used in radiation protection. Using the mouse Harderian gland tumor experiment, the only extensive data-setmore » for dose response modelling with a variety of particle types (>4), for the first-time a particle track structure model of tumor prevalence is used to investigate the effects of NTEs in predictions of chronic GCR exposure risk. The NTE model led to a predicted risk 2-fold higher compared to a targeted effects model. The scarcity of data with animal models for tissues that dominate human radiation cancer risk, including lung, colon, breast, liver, and stomach, suggest that studies of NTEs in other tissues are urgently needed prior to long-term space missions outside the protection of the Earth’s geomagnetic sphere.« less

Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area.

PubMed

Tong, Hui; Tanaka, Carina B; Kaizer, Marina R; Zhang, Yu

2016-01-01

Developing yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with high strength and translucency could significantly widen the clinical indications of monolithic zirconia restorations. This study investigates the mechanical and optical properties of three Y-TZP ceramics: High-Translucency, High-Strength and High-Surface Area. The four-point bending strengths (mean ± standard error) for the three Y-TZP ceramics ( n = 10) were 990 ± 39, 1416 ± 33 and 1076 ± 32 MPa for High-Translucency, High-Strength and High-Surface Area, respectively. The fracture toughness values (mean ± standard error) for the three zirconias ( n = 10) were 3.24 ± 0.10, 3.63 ± 0.12 and 3.21 ± 0.14 MPa m 1/2 for High-Translucency, High-Strength and High-Surface Area, respectively. Both strength and toughness values of High-Strength zirconia were significantly higher than High-Surface Area and High-Translucency zirconias. Translucency parameter values of High-Translucency zirconia were considerably higher than High-Strength and High-Surface Area zirconias. However, all three zirconias became essentially opaque when their thickness reached 1 mm or greater. Our findings suggest that there exists a delicate balance between mechanical and optical properties of the current commercial Y-TZP ceramics.

Performance evaluation on an air-cooled heat exchanger for alumina nanofluid under laminar flow.

PubMed

Teng, Tun-Ping; Hung, Yi-Hsuan; Teng, Tun-Chien; Chen, Jyun-Hong

2011-08-09

This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study measured the thermal conductivity and viscosity of nanofluid with weight fractions and sample temperatures (20-60°C), and then used the nanofluid in an actual air-cooled heat exchanger to assess its heat exchange capacity and pressure drop under laminar flow. Experimental results show that the nanofluid has a higher heat exchange capacity than water, and a higher concentration of nanoparticles provides an even better ratio of the heat exchange. The maximum enhanced ratio of heat exchange and pressure drop for all the experimental parameters in this study was about 39% and 5.6%, respectively. In addition to nanoparticle concentration, the temperature and mass flow rates of the working fluid can affect the enhanced ratio of heat exchange and pressure drop of nanofluid. The cross-section aspect ratio of tube in the heat exchanger is another important factor to be taken into consideration.

Effects of anthocyanin and carotenoid combinations on foliage and immature fruit color of Capsicum annuum L.

PubMed

Lightbourn, Gordon J; Griesbach, Robert J; Novotny, Janet A; Clevidence, Beverly A; Rao, David D; Stommel, John R

2008-01-01

Shades ranging from violet to black pigmentation in pepper (Capsicum annuum L.) are attributed to anthocyanin accumulation. High-performance liquid chromatography and mass spectrometry analysis of violet and black fruit tissue identified a single anthocyanin that was determined to be delphinidin-3-p-coumaroyl-rutinoside-5-glucoside. Leaf tissue of a black-pigmented foliage genotype contained the same anthocyanin found in fruit but at a considerably higher concentration in comparison to violet and black fruit tissue. Fruit chlorophyll concentration was approximately 14-fold higher in black fruit in comparison to violet fruit that contained relatively little chlorophyll. Beta-carotene, lutein, violaxanthin, and neoxanthin carotenoid concentrations in black fruit were also significantly greater in comparison to violet fruit. High concentrations of delphinidin in combination with chlorophyll and accessory carotenoid pigments produced the characteristic black pigmentation observed in fruits and leaves of selected genotypes. Anthocyanins were accumulated in the outer mesocarp of violet and black fruit and in the palisade and mesophyll cells of black leaves. Consistent with chlorophyll content of respective genotypes, chloroplast density was greater in cells of black fruits. Utilizing Capsicum pigment variants, we determine the biochemical factors responsible for violet versus black-pigmented pepper tissue in the context of described pepper color genes.

Continuing dental education in radiation protection: monitoring the outcomes.

PubMed

Absi, Eg; Drage, Na; Thomas, Hs; Newcombe, Rg; Nash, Es

2009-03-01

To evaluate an evolving radiation protection dental postgraduate course run in Wales between 2003 and 2007. We compared three standardized course series. Course content was enhanced in 2006 to target areas of weakness. In 2007, a single best answer multiple choice questionnaire instrument superseded a true/false format. Practitioners' performance was studied pre- and immediately post-training. 900 participants completed identical pre- and post-course validated multiple choice questionnaires. 809 (90%) paired morning-afternoon records, including those of 52 dental care professionals (DCPs), were analysed. Mean (standard error) pre- and post-course percentage scores for the three courses were 33.8 (0.9), 35.4 (1.4), 34.6 (1.0) and 63.6 (0.9), 59.0 (1.4), 69.5 (0.9). Pre-training, only 2.4%, 3.1% and 4.9% of participants achieved the pass mark compared to 57.7%, 48.4% and 65.9% post-training, indicating a rather greater pass rate and gain in the most recent series than earlier ones. In recent series, older more experienced candidates scored slightly higher; however, their gain from pre- to post-training was slightly less. Baseline levels of radiation protection knowledge remained very low but attending an approved course improved this considerably. Targeting areas of weaknesses produced higher scores. Current radiation protection courses may not be optimal for DCPs.

Picosecond laser ablation of poly-L-lactide: Effect of crystallinity on the material response

NASA Astrophysics Data System (ADS)

Ortiz, Rocío; Quintana, Iban; Etxarri, Jon; Lejardi, Ainhoa; Sarasua, Jose-Ramon

2011-11-01

The picosecond laser ablation of poly-L-lactide (PLLA) as a function of laser fluence and degree of crystallinity was examined. The ablation parameters and the surface modifications were analyzed under various irradiation conditions using laser wavelengths ranging from the ultraviolet through the visible. When processing the amorphous PLLA, both energy threshold and topography varied considerably depending on laser wavelength. Laser irradiation showed a reduction in the energy ablation threshold as the degree of crystallinity increased, probably related to photomechanical effects involved in laser ablation with ultra-short pulses and the lower stress accommodation behavior of semicrystalline polymers. In particular, cooperative chain motions are impeded by the higher degree of crystallinity, showing fragile mechanical behavior and lower energy dissipation. The experimental results on ablation rate versus laser energy showed that UV laser ablation on semicrystalline PLLA was more efficient than the visible ablation, i.e., it exhibits higher etch rates over a wide range of pulse energy conditions. These results were interpreted in terms of photo-thermal and photo-chemical response of polymers as a function of material micro-structure and incident laser wavelength. High quality micro-grooves were produced in amorphous PLLA, reveling the potential of ultra-fast laser processing technique in the field of micro-structuring biocompatible and biodegradable polymers for biomedical applications.

Performance evaluation on an air-cooled heat exchanger for alumina nanofluid under laminar flow

PubMed Central

2011-01-01

This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study measured the thermal conductivity and viscosity of nanofluid with weight fractions and sample temperatures (20-60°C), and then used the nanofluid in an actual air-cooled heat exchanger to assess its heat exchange capacity and pressure drop under laminar flow. Experimental results show that the nanofluid has a higher heat exchange capacity than water, and a higher concentration of nanoparticles provides an even better ratio of the heat exchange. The maximum enhanced ratio of heat exchange and pressure drop for all the experimental parameters in this study was about 39% and 5.6%, respectively. In addition to nanoparticle concentration, the temperature and mass flow rates of the working fluid can affect the enhanced ratio of heat exchange and pressure drop of nanofluid. The cross-section aspect ratio of tube in the heat exchanger is another important factor to be taken into consideration. PMID:21827644

Non-Targeted Effects Models Predict Significantly Higher Mars Mission Cancer Risk than Targeted Effects Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cucinotta, Francis A.; Cacao, Eliedonna

Cancer risk is an important concern for galactic cosmic ray (GCR) exposures, which consist of a wide-energy range of protons, heavy ions and secondary radiation produced in shielding and tissues. Relative biological effectiveness (RBE) factors for surrogate cancer endpoints in cell culture models and tumor induction in mice vary considerable, including significant variations for different tissues and mouse strains. Many studies suggest non-targeted effects (NTE) occur for low doses of high linear energy transfer (LET) radiation, leading to deviation from the linear dose response model used in radiation protection. Using the mouse Harderian gland tumor experiment, the only extensive data-setmore » for dose response modelling with a variety of particle types (>4), for the first-time a particle track structure model of tumor prevalence is used to investigate the effects of NTEs in predictions of chronic GCR exposure risk. The NTE model led to a predicted risk 2-fold higher compared to a targeted effects model. The scarcity of data with animal models for tissues that dominate human radiation cancer risk, including lung, colon, breast, liver, and stomach, suggest that studies of NTEs in other tissues are urgently needed prior to long-term space missions outside the protection of the Earth’s geomagnetic sphere.« less

Biohydrogen production from lactose: influence of substrate and nitrogen concentration.

PubMed

Moreno, R; Fierro, J; Fernández, C; Cuetos, M J; Gómez, X

2015-01-01

Hydrogen produced from renewable sources may be considered the energy vector of the future. However, reducing process costs is imperative in order to achieve this goal. In the present research, the effect of nitrogen (N), initial pH and substrate content for starting up the dark fermentative process was studied using the response surface methodology. Anaerobic digested dried sludge (biosolid pellets) was used as the inoculum. Synthetic wastewater was used as the substrate in batch reactors. A decrease in H2 production was observed with the increase in N and lactose concentrations. This drop was considerably greater when the concentration of lactose was at its lower level. Although the increase in lactose concentration results in a lower H2 production, the effect of N on the response is attenuated at higher levels of lactose. On the other hand, the effect of initial pH on the fermentation system was not significant. The evaluation on the process under semi-continuous conditions was performed using anaerobic sequencing batch reactors (ASBRs). The process was evaluated at different C/N ratios using synthetic wastewater. Results showed higher hydrogen yields with the gradual decrease in nitrogen content. The addition of cheese whey to the ASBR resulted in a H2 production rate of 0.18 L H2 L(-1) d(-1).

Antioxidant and antimicrobial properties of polyphenolic fractions from selected Moroccan red wines.

PubMed

Tenore, Gian Carlo; Basile, Adriana; Novellino, Ettore

2011-01-01

The present study is the first effort to a comprehensive evaluation of the antioxidant and antimicrobial activities of fractionated red wines from Morocco. The results obtained revealed that the wine samples were characterized by a higher phytochemical concentration than the same variety of wines with a different geographical origin and other more consumed red wines, confirming what was reported in a previous authors' work. The most phenolic-rich fractions were the ones containing phenolic acids and quercetin glucoronides from Syrah and Merlot wine samples while Cabernet Sauvignon exhibited the highest monomeric anthocyanin content. The antioxidant activity of wine extracts was tested by ferric reducing antioxidant power and 1,1-diphenyl-2-picrilhydrazyl assays. Samples revealed a higher reducing capacity than radical scavenging property and a good correlation between antioxidant activity and polyphenolic content values. As regards the antimicrobial properties, each fraction exhibited activity against a broad spectrum of food-borne microorganisms, revealing not only a moderate to high natural preserving capacity, but also potentially beneficial influence on human health. In consideration of the scarcity of data regarding composition and biological properties of Moroccan red wines, the present study may represent a valuable reference for wine consumers and producers. © 2011 Institute of Food Technologists®

Nanomechanical Characterization of Temperature-Dependent Mechanical Properties of Ion-Irradiated Zirconium with Consideration of Microstructure and Surface Damage

NASA Astrophysics Data System (ADS)

Marsh, Jonathan; Zhang, Yang; Verma, Devendra; Biswas, Sudipta; Haque, Aman; Tomar, Vikas

2015-12-01

Zirconium alloys for nuclear applications with different microstructures were produced by manufacturing processes such as chipping, rolling and annealing. The two Zr samples, rolled and rolled-annealed were subjected to different levels of irradiation, 1 keV and 100 eV, to study the effect of irradiation dosages. The effect of microstructure and irradiation on the mechanical properties (reduced modulus, hardness, indentation yield strength) was analyzed with nanoindentation experiments, which were carried out in the temperature range of 25°C to 450°C to investigate temperature dependence. An indentation size effect analysis was performed and the mechanical properties were also corrected for the oxidation effects at high temperatures. The irradiation-induced hardness was observed, with rolled samples exhibiting higher increase compared to rolled and annealed samples. The relevant material parameters of the Anand viscoplastic model were determined for Zr samples containing different level of irradiation to account for viscoplasticity at high temperatures. The effect of the microstructure and irradiation on the stress-strain curve along with the influence of temperature on the mechanisms of irradiation creep such as formation of vacancies and interstitials is presented. The yield strength of irradiated samples was found to be higher than the unirradiated samples which also showed a decreasing trend with the temperature.

Individual differences in the benefits of feedback for learning.

PubMed

Kelley, Christopher M; McLaughlin, Anne Collins

2012-02-01

Research on learning from feedback has produced ambiguous guidelines for feedback design--some have advocated minimal feedback, whereas others have recommended more extensive feedback that highly supported performance. The objective of the current study was to investigate how individual differences in cognitive resources may predict feedback requirements and resolve previous conflicted findings. Cognitive resources were controlled for by comparing samples from populations with known differences, older and younger adults.To control for task demands, a simple rule-based learning task was created in which participants learned to identify fake Windows pop-ups. Pop-ups were divided into two categories--those that required fluid ability to identify and those that could be identified using crystallized intelligence. In general, results showed participants given higher feedback learned more. However, when analyzed by type of task demand, younger adults performed comparably with both levels of feedback for both cues whereas older adults benefited from increased feedbackfor fluid ability cues but from decreased feedback for crystallized ability cues. One explanation for the current findings is feedback requirements are connected to the cognitive abilities of the learner-those with higher abilities for the type of demands imposed by the task are likely to benefit from reduced feedback. We suggest the following considerations for feedback design: Incorporate learner characteristics and task demands when designing learning support via feedback.

Comparison of Y-jet and OIL effervescent atomizers based on internal and external two-phase flow characteristics

NASA Astrophysics Data System (ADS)

Mlkvik, Marek; Zaremba, Matous; Jedelsky, Jan; Jicha, Miroslav

2016-03-01

Presented paper focuses on spraying of two viscous liquids (μ = 60 and 143 mPa·s) by two types of twinfluid atomizers with internal mixing. We compared the well-known Y-jet atomizer with the less known, "outside in liquid" (OIL), configuration of the effervescent atomizer. The required liquid viscosity was achieved by using the water-maltodextrin solutions of different concentrations. Both the liquids were sprayed at two gas inlet pressures (Δp = 0.14 and 0.28 MPa) and various gas-to-liquid ratios (GLR = 2.5%, 5%, 10% and 20%). The comparison was focused on four characteristics: liquid flow-rate (for the same working regimes, defined by Δp and GLR), internal flow regimes, Weber numbers of a liquid breakup (We) and droplet sizes. A high-speed camera and Malvern Spraytec laser diffraction system were used to obtain necessary experimental data. Comparing the results of our experiments, we can state that for both the liquids the OIL atomizer reached higher liquid flow-rates at corresponding working regimes, it was typical by annular internal flow and higher We in the near-nozzle region at all the working regimes. As a result, it produced considerably smaller droplets than the second tested atomizing device, especially for GLR < 10%.

Harmonic cascade FEL designs for LUX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Penn, G.; Reinsch, M.; Wurtele, J.

LUX is a design concept for an ultrafast X-ray science facility, based on an electron beam accelerated to GeV energies in are circulating linac. Included in the design are short duration (200 fs or shorter FWHM) light sources using multiple stages of higher harmonic generation, seeded by a 200-250 nm laser of similar duration. This laser modulates the energy of a group of electrons within the electron bunch; this section of the electron bunch then produces radiation at a higher harmonic after entering a second, differently tuned undulator. Repeated stages in a cascade yield increasing photon energies up to 1more » keV. Most of the undulators in the cascade operate in the low-gain FEL regime. Harmonic cascades have been designed for each pass of the recirculating linac up to a final electron beam energy of 3.1 GeV. For a given cascade, the photon energy can be selected over a wide range by varying the seed laser frequency and the field strength in the undulators. We present simulation results using the codes GENESIS and GINGER, as well as the results of analytical models which predict FEL performance. We discuss lattice considerations pertinent for harmonic cascade FELs, as well as sensitivity studies and requirements on the electron beam.« less

Application of a genetically encoded biosensor for live cell imaging of L-valine production in pyruvate dehydrogenase complex-deficient Corynebacterium glutamicum strains.

PubMed

Mustafi, Nurije; Grünberger, Alexander; Mahr, Regina; Helfrich, Stefan; Nöh, Katharina; Blombach, Bastian; Kohlheyer, Dietrich; Frunzke, Julia

2014-01-01

The majority of biotechnologically relevant metabolites do not impart a conspicuous phenotype to the producing cell. Consequently, the analysis of microbial metabolite production is still dominated by bulk techniques, which may obscure significant variation at the single-cell level. In this study, we have applied the recently developed Lrp-biosensor for monitoring of amino acid production in single cells of gradually engineered L-valine producing Corynebacterium glutamicum strains based on the pyruvate dehydrogenase complex-deficient (PDHC) strain C. glutamicum ΔaceE. Online monitoring of the sensor output (eYFP fluorescence) during batch cultivation proved the sensor's suitability for visualizing different production levels. In the following, we conducted live cell imaging studies on C. glutamicum sensor strains using microfluidic chip devices. As expected, the sensor output was higher in microcolonies of high-yield producers in comparison to the basic strain C. glutamicum ΔaceE. Microfluidic cultivation in minimal medium revealed a typical Gaussian distribution of single cell fluorescence during the production phase. Remarkably, low amounts of complex nutrients completely changed the observed phenotypic pattern of all strains, resulting in a phenotypic split of the population. Whereas some cells stopped growing and initiated L-valine production, others continued to grow or showed a delayed transition to production. Depending on the cultivation conditions, a considerable fraction of non-fluorescent cells was observed, suggesting a loss of metabolic activity. These studies demonstrate that genetically encoded biosensors are a valuable tool for monitoring single cell productivity and to study the phenotypic pattern of microbial production strains.

Deep Brain Stimulation of Heschl Gyrus: Implantation Technique, Intraoperative Localization, and Effects of Stimulation.

PubMed

Donovan, Chris; Sweet, Jennifer; Eccher, Matthew; Megerian, Cliff; Semaan, Maroun; Murray, Gail; Miller, Jonathan

2015-12-01

Tinnitus is a source of considerable morbidity, and neuromodulation has been shown to be a potential treatment option. However, the location of the primary auditory cortex within Heschl gyrus in the temporal operculum presents challenges for targeting and electrode implantation. To determine whether anatomic targeting with intraoperative verification using evoked potentials can be used to implant electrodes directly into the Heschl gyrus (HG). Nine patients undergoing stereo-electroencephalogram evaluation for epilepsy were enrolled. HG was directly targeted on volumetric magnetic resonance imaging, and framed stereotaxy was used to implant an electrode parallel to the axis of the gyrus by using an oblique anterolateral-posteromedial trajectory. Intraoperative evoked potentials from auditory stimuli were recorded from multiple electrode contacts. Postoperatively, stimulation of each electrode was performed and participants were asked to describe the percept. Audiometric analysis was performed for 2 participants during subthreshold stimulation. Sounds presented to the contralateral and ipsilateral ears produced evoked potentials in HG electrodes in all participants intraoperatively. Stimulation produced a reproducible sensation of sound in all participants with perceived volume proportional to amplitude. Four participants reported distinct sounds when different electrodes were stimulated, with more medial contacts producing tones perceived as higher in pitch. Stimulation was not associated with adverse audiometric effects. There were no complications of electrode implantation. Direct anatomic targeting with physiological verification can be used to implant electrodes directly into primary auditory cortex. If deep brain stimulation proves effective for intractable tinnitus, this technique may be useful to assist with electrode implantation. DBS, deep brain stimulatorEEG, electroencephalographyHG, Heschl gyrus.

Mechanism of Zn Particle Oxidation by H2O and CO2 in the Presence of ZnO

PubMed Central

2014-01-01

In this work we investigate the mechanism of Zn oxidation with CO2 and/or H2O to produce solar derived fuels (CO and/or H2) as part of the Zn/ZnO thermochemical redox cycle. It has been observed that the ZnO contamination of Zn produced by solar thermal reduction of ZnO (solar Zn) facilitates oxidation of the metallic Zn by CO2 and H2O, allowing for nearly complete conversion at temperatures as low as 350 °C. Reaching the same reaction extent starting with pure Zn requires considerably higher temperatures which imposes use of unconventional hard-to-operate reaction configurations utilizing Zn as vapor. The mechanism of this enhancement is investigated by studying the oxidation of solid Zn diluted with ZnO or Al2O3 at 350–400 °C utilizing thermogravimetry. It is found that ZnO acts as the site for the oxidation of Zn originating from the vapor phase, thereby serving as a sink for Zn vapor and maintaining the driving force for sustainable Zn sublimation. As this Zn sublimation competes with the growth of an impervious ZnO scale over the surface of the remaining solid Zn, the presence of the ZnO increases the reaction extent according to the magnitude of its surface area. This mechanism is supported by energy-dispersive X-ray (EDX) spectroscopy, revealing a substantial deposition of produced ZnO over the surface of the ZnO-seeded Al2O3 diluent. PMID:26692637

Mechanism of Zn Particle Oxidation by H2O and CO2 in the Presence of ZnO.

PubMed

Weibel, David; Jovanovic, Zoran R; Gálvez, Elena; Steinfeld, Aldo

2014-11-25

In this work we investigate the mechanism of Zn oxidation with CO 2 and/or H 2 O to produce solar derived fuels (CO and/or H 2 ) as part of the Zn/ZnO thermochemical redox cycle. It has been observed that the ZnO contamination of Zn produced by solar thermal reduction of ZnO (solar Zn) facilitates oxidation of the metallic Zn by CO 2 and H 2 O, allowing for nearly complete conversion at temperatures as low as 350 °C. Reaching the same reaction extent starting with pure Zn requires considerably higher temperatures which imposes use of unconventional hard-to-operate reaction configurations utilizing Zn as vapor. The mechanism of this enhancement is investigated by studying the oxidation of solid Zn diluted with ZnO or Al 2 O 3 at 350-400 °C utilizing thermogravimetry. It is found that ZnO acts as the site for the oxidation of Zn originating from the vapor phase, thereby serving as a sink for Zn vapor and maintaining the driving force for sustainable Zn sublimation. As this Zn sublimation competes with the growth of an impervious ZnO scale over the surface of the remaining solid Zn, the presence of the ZnO increases the reaction extent according to the magnitude of its surface area. This mechanism is supported by energy-dispersive X-ray (EDX) spectroscopy, revealing a substantial deposition of produced ZnO over the surface of the ZnO-seeded Al 2 O 3 diluent.

Application of a Genetically Encoded Biosensor for Live Cell Imaging of L-Valine Production in Pyruvate Dehydrogenase Complex-Deficient Corynebacterium glutamicum Strains

PubMed Central

Mahr, Regina; Helfrich, Stefan; Nöh, Katharina; Blombach, Bastian; Kohlheyer, Dietrich; Frunzke, Julia

2014-01-01

The majority of biotechnologically relevant metabolites do not impart a conspicuous phenotype to the producing cell. Consequently, the analysis of microbial metabolite production is still dominated by bulk techniques, which may obscure significant variation at the single-cell level. In this study, we have applied the recently developed Lrp-biosensor for monitoring of amino acid production in single cells of gradually engineered L-valine producing Corynebacterium glutamicum strains based on the pyruvate dehydrogenase complex-deficient (PDHC) strain C. glutamicum ΔaceE. Online monitoring of the sensor output (eYFP fluorescence) during batch cultivation proved the sensor's suitability for visualizing different production levels. In the following, we conducted live cell imaging studies on C. glutamicum sensor strains using microfluidic chip devices. As expected, the sensor output was higher in microcolonies of high-yield producers in comparison to the basic strain C. glutamicum ΔaceE. Microfluidic cultivation in minimal medium revealed a typical Gaussian distribution of single cell fluorescence during the production phase. Remarkably, low amounts of complex nutrients completely changed the observed phenotypic pattern of all strains, resulting in a phenotypic split of the population. Whereas some cells stopped growing and initiated L-valine production, others continued to grow or showed a delayed transition to production. Depending on the cultivation conditions, a considerable fraction of non-fluorescent cells was observed, suggesting a loss of metabolic activity. These studies demonstrate that genetically encoded biosensors are a valuable tool for monitoring single cell productivity and to study the phenotypic pattern of microbial production strains. PMID:24465669

Dual-high-frequency ultrasound excitation on microbubble destruction volume.

PubMed

Shen, Che-Chou; Su, Shin-Yuan; Cheng, Chih-Hao; Yeh, Chih-Kuang

2010-06-01

The goal of this work was to test experimentally that exposing air bubbles or ultrasound contrast agents in water to amplitude modulated wave allows control of inertial cavitation affected volume and hence could limit the undesirable bioeffects. Focused transducer operating at the center frequency of 10 MHz and having about 65% fractional bandwidth was excited by 3 micros 8.5 and 11.5 MHz tone-bursts to produce 3 MHz envelope signal. The 3 MHz frequency was selected because it corresponds to the resonance frequency of the microbubbles used in the experiment. Another 5 MHz transducer was used as a receiver to produce B-mode image. Peak negative acoustic pressure was adjusted in the range from 0.5 to 3.5 MPa. The spectrum amplitudes obtained from the imaging of SonoVue contrast agent when using the envelope and a separate 3 MHz transducer were compared to determine their cross-section at the -6 dB level. The conventional 3 MHz tone-burst excitation resulted in the region of interest (ROI) cross-section of 2.47 mm while amplitude modulated, dual-frequency excitation with difference frequency of 3 MHz produced cross-section equal to 1.2mm. These results corroborate our hypothesis that, in addition to the considerably higher penetration depth of dual-frequency excitation due to the lower attenuation at 3 MHz than that at 8.5 and 11.5 MHz, the sample volume of dual-frequency excitation is also smaller than that of linear 3-MHz method for more spatially confined destruction of microbubbles. 2010 Elsevier B.V. All rights reserved.

Masculinities in Higher Education: Theoretical and Practical Considerations

ERIC Educational Resources Information Center

Laker, Jason A., Ed.; Davis, Tracy, Ed.

2011-01-01

"Masculinities in Higher Education" provides empirical evidence, theoretical support, and developmental interventions for educators working with college men both in and out of the classroom. The critical philosophical perspective of the text challenges the status-quo and offers theoretically sound educational strategies to successfully promote…

Motorcycle Safety Education. A Curriculum Guide.

ERIC Educational Resources Information Center

Ohio State Board of Education, Columbus.

This curriculum guide was produced to assist instructors of educational programs for novice motorcycle operators, automobile drivers, and all highway users. An introductory section discusses program implementation concerns, such as public relations, legal considerations, scheduling, staff, students, facilities, motorcycles, insurance, financial…

Microwave-Assisted Green Synthesis of Silver Nanostructures

EPA Science Inventory

This account summarizes a microwave (MW)-assisted synthetic approach for producing silver nanostructures. The rapid and in-core MW heating has received considerable attention as a promising new method for the one-pot synthesis of metallic nanostructures in solutions. Conceptually...

Managing livestock using animal behavior: Mixed-species stocking and flerds

USDA-ARS?s Scientific Manuscript database

Mixed-species stocking can foster sound landscape management while offering economic and ecological advantages compared to mono-species stocking. Producers contemplating a mixed-species enterprise should reflect on several considerations before implementing this animal management strategy. Factors...

Dehydropyrrolizidine alkaloid toxicity, cytotoxicity, and carcinogenicity

USDA-ARS?s Scientific Manuscript database

Dehyro-pyrrolizidine alkaloid (PA)-containing plants compose about 5% of the world’s flowering plants and they commonly poison livestock, wildlife and humans. Previous work has produced considerable understanding of PA toxicity, species susceptibility, conditions and routes of exposure, toxin metab...

Considerations for Determining the Source of Groundwater Contamination Associated with Hydraulic Fracturing

EPA Pesticide Factsheets

Detection of anthropogenic HF chemicals more telling but more challenging than detection of produced water constituents. Increased SRB activity due to increased natural gas metabolism may be responsible for reduction in drinking water quality.

Development of a bespoke human factors taxonomy for gliding accident analysis and its revelations about highly inexperienced UK glider pilots.

PubMed

Jarvis, Steve; Harris, Don

2009-08-01

Low-hours solo glider pilots have a high risk of accidents compared to more experienced pilots. Numerous taxonomies for causal accident analysis have been produced for powered aviation but none of these is suitable for gliding, so a new taxonomy was required. A human factors taxonomy specifically for glider operations was developed and used to analyse all UK gliding accidents from 2002 to 2006 for their overall causes as well as factors specific to low hours pilots. Fifty-nine categories of pilot-related accident causation emerged, which were formed into progressively larger categories until four overall human factors groups were arrived at: 'judgement'; 'handling'; 'strategy'; 'attention'. 'Handling' accounted for a significantly higher proportion of injuries than other categories. Inexperienced pilots had considerably more accidents in all categories except 'strategy'. Approach control (path judgement, airbrake and speed handling) as well as landing flare misjudgement were chiefly responsible for the high accident rate in early solo glider pilots.

Sleep, circadian rhythms, and psychomotor vigilance.

PubMed

Van Dongen, Hans P A; Dinges, David F

2005-04-01

Psychomotor vigilance performance is highly relevant to athletic performance. It is influenced by a sleep homeostatic process, which builds up pressure for sleep during wakefulness and dissipates this pressure during sleep, and a circadian rhythm process, which produces a waxing and waning of pressure for wakefulness over a 24 hours of the day. During total sleep deprivation, these two processes cause performance to deteriorate progressively over days, modulated within days by further performance reductions at night and relative improvements during the daytime. As the homeostatic pressure for sleep builds up higher across prolonged wakefulness, the rate of dissipation of that pressure during subsequent sleep is enhanced exponentially, so that even brief periods of sleep provide significant performance recuperation. Nevertheless, sleep restriction practiced on a chronic basis induces cumulative performance deficits of the same order of magnitude as observed during total sleep deprivation. There are also considerable individual differences in the degree of vulnerability to performance impairment from sleep loss, and these differences represent a trait.

Low molecular-weight phenols in Tannat wines made by alternative winemaking procedures.

PubMed

Favre, Guzmán; Peña-Neira, Álvaro; Baldi, Cecilia; Hernández, Natalia; Traverso, Sofía; Gil, Graciela; González-Neves, Gustavo

2014-09-01

Low molecular weight phenols of Tannat red wines produced by Traditional Maceration (TM), Prefermentative Cold Maceration (PCM), Maceration Enzyme (ENZ) and grape-Seed Tannins additions (ST), were performed and discussed. Alternatives to TM increased wine phenolic contents but unequally, ST increased mainly smaller flavans-3-ol, PCM anthocyanins and ENZ proanthocyanidins (up to 2250 mg/L). However low molecular weight flavan-3-ols remained below 9 mg/L in all wines, showing that there is not necessarily a correspondence between wine richness in total tannins and flavan-3-ols contents at low molecular weight. PCM wines had particularly high concentrations of tyrosol and tryptophol, yeast metabolism derived compounds. The use of grape-seed enological tannins did not increase grape seed derived phenolic compounds such as gallic acid. Caftaric acid was found in concentrations much higher than those reported in other grape varieties. Wine phenolic content and composition was considerably affected by the winemaking procedures tested. Copyright © 2014 Elsevier Ltd. All rights reserved.

Vehicle Sketch Pad: a Parametric Geometry Modeler for Conceptual Aircraft Design

NASA Technical Reports Server (NTRS)

Hahn, Andrew S.

2010-01-01

The conceptual aircraft designer is faced with a dilemma, how to strike the best balance between productivity and fidelity? Historically, handbook methods have required only the coarsest of geometric parameterizations in order to perform analysis. Increasingly, there has been a drive to upgrade analysis methods, but these require considerably more precise and detailed geometry. Attempts have been made to use computer-aided design packages to fill this void, but their cost and steep learning curve have made them unwieldy at best. Vehicle Sketch Pad (VSP) has been developed over several years to better fill this void. While no substitute for the full feature set of computer-aided design packages, VSP allows even novices to quickly become proficient in defining three-dimensional, watertight aircraft geometries that are adequate for producing multi-disciplinary meta-models for higher order analysis methods, wind tunnel and display models, as well as a starting point for animation models. This paper will give an overview of the development and future course of VSP.

Why Do Corals Bleach? Conflict and Conflict Mediation in a Host/Symbiont Community.

PubMed

Blackstone, Neil W; Golladay, Jeff M

2018-06-26

Coral bleaching has attracted considerable study, yet one central question remains unanswered: given that corals and their Symbiodinium symbionts have co-evolved for millions of years, why does this clearly maladaptive process occur? Bleaching may result from evolutionary conflict between the host corals and their symbionts. Selection at the level of the individual symbiont favors using the products of photosynthesis for selfish replication, while selection at the higher level favors using these products for growth of the entire host/symbiont community. To hold the selfish lower-level units in check, mechanisms of conflict mediation must evolve. Fundamental features of photosynthesis have been co-opted into conflict mediation so that symbionts that fail to export these products produce high levels of reactive oxygen species and undergo programmed cell death. These mechanisms function very well under most environmental conditions, but under conditions particularly detrimental to photosynthesis, it is these mechanisms of conflict mediation that trigger bleaching. © 2018 WILEY Periodicals, Inc.

Selection and Use of Manganese Dioxide by Neanderthals

PubMed Central

Heyes, Peter J.; Anastasakis, Konstantinos; de Jong, Wiebren; van Hoesel, Annelies; Roebroeks, Wil; Soressi, Marie

2016-01-01

Several Mousterian sites in France have yielded large numbers of small black blocs. The usual interpretation is that these ‘manganese oxides’ were collected for their colouring properties and used in body decoration, potentially for symbolic expression. Neanderthals habitually used fire and if they needed black material for decoration, soot and charcoal were readily available, whereas obtaining manganese oxides would have incurred considerably higher costs. Compositional analyses lead us to infer that late Neanderthals at Pech-de-l’Azé I were deliberately selecting manganese dioxide. Combustion experiments and thermo-gravimetric measurements demonstrate that manganese dioxide reduces wood’s auto-ignition temperature and substantially increases the rate of char combustion, leading us to conclude that the most beneficial use for manganese dioxide was in fire-making. With archaeological evidence for fire places and the conversion of the manganese dioxide to powder, we argue that Neanderthals at Pech-de-l’Azé I used manganese dioxide in fire-making and produced fire on demand. PMID:26922901

Energy saving analysis on mine-water source heat pump in a residential district of Henan province, central China

NASA Astrophysics Data System (ADS)

Wang, Hong; Duan, Huanlin; Chen, Aidong

2018-02-01

In this paper, the mine-water source heat pump system is proposed in residential buildings of a mining community. The coefficient of performance (COP) and the efficiency of exergy are analyzed. The results show that the COP and exergy efficiency of the mine-water source heat pump are improved, the exergy efficiency of mine-water source heat pump is more than 10% higher than that of the air source heat pump.The electric power conservation measure of “peak load shifting” is also emphasized in this article. It shows that itis a very considerable cost in the electric saving by adopting the trough period electricity to produce hot water. Due to the proper temperature of mine water, the mine-watersource heat pump unit is more efficient and stable in performance, which further shows the advantage of mine-water source heat pump in energy saving and environmental protection. It provides reference to the design of similar heat pump system as well.

Behavioral fever in newborn rabbits

NASA Technical Reports Server (NTRS)

Satinoff, E.; Mcewen, G. N., Jr.; Williams, B. A.

1976-01-01

New Zealand white rabbit pups aged 12 to 72 hr were divided into three groups and given an intraperitoneal injection of Pseudomonas polysaccharide, a saline vehicle alone, and no treatment, respectively. The animals injected with pyrogen and maintained at an ambient temperature of 32 C for 2 hr did not develop fever. When placed in a thermally graded alleyway, the animals injected with pyrogen selected gradient positions that represented significantly higher temperatures than controls injected with saline. Further stay at selected positions for 5 min caused a considerable increase in the rectal temperature of the pyrogen-injected pups but not that of controls. The results support the hypothesis that newborn rabbits will develop a fever by behavioral means after a single injection of an exogenous pyrogen if the opportunity for thermoregulatory behavior is present. No fever develops if the pups must rely solely on internal thermoregulatory mechanisms. The behavioral system for producing a fever is mature at birth, but an adequate system of internal reflexes does not appear to develop for some days.

Reconstruction of crimes by infrared photography.

PubMed

Sterzik, V; Bohnert, M

2016-09-01

Whenever blunt or sharp forces are used in a crime, analysis of bloodstain pattern distribution may provide important information for the reconstruction of happenings. Thereby, attention should be paid to both the crime scene and the clothes of everyone involved in the crime. On dark textiles, though, it is difficult or even impossible for the human eye to detect bloodstains because of the low contrast to the background. However, in the near infrared wavelength range, contrast is considerably higher. Many textiles reflect light beyond a wavelength of 830 nm and thus appear light-colored, whereas blood absorbs the light and appears dark. In our studies, a D7000 NIKON reflex camera modified for infrared photography produced high-resolution photographs visualizing even very small spatter stains on dark textiles. The equipment can be used at any crime scene or lab and provides immediately available and interpretable images. Thus, important findings can be obtained at an early stage of police investigations, as two examples (homicide and attempted homicide) illustrate.

Evaluation of the Effects of Rivastigmine on Cigarette Smoking by Methamphetamine-Dependent Volunteers

PubMed Central

De La Garza, R.; Yoon, J.H.

2011-01-01

Compared to smokers alone, smokers with co-morbid substance use disorders are at greater risk of suffering from smoking-related death. Despite this, relatively few studies have examined smoking cessation treatments for those with stimulant dependence. In the current study, we sought to evaluate the effects of produced by short-term exposure to the cholinesterase inhibitor rivastigmine (0, 3 or 6 mg) on cigarette smoking in non-treatment-seeking, methamphetamine-dependent volunteers. This was a double-blind, placebo-controlled, crossover study that took place over 9 days. The data indicate that rivastigmine treatment did not alter Fagerström Test for Nicotine Dependence scores, carbon monoxide readings, or cigarettes smoked per day, but a trend toward reduced urges to smoke (p<0.09) was detected during treatment with rivastigmine 3 mg. These data, while preliminary, indicate that cholinesterase inhibitors warrant further consideration as treatments for nicotine dependence, including use in stimulant-dependent individuals who exhibit significantly higher rates of smoking than the general population. PMID:21803113

The relative costs and benefits of telephone interviews versus self-administered diaries for daily data collection.

PubMed

Hoppe, M J; Gillmore, M R; Valadez, D L; Civic, D; Hartway, J; Morrison, D M

2000-02-01

This article compares two methods of collecting daily data: self-administered diaries and telephone interviews. Study participants included 44 men and 56 women between the ages of 16 and 35 who participated in a larger study of drinking, drug use, and sexual activity. Participants were randomly assigned to either the written diary or the telephone interview conditions; question wording and format were identical in both conditions. Daily data were collected for a period of 8 weeks. Results indicate that although telephone interviews resulted in slightly more missed days of data collection, they generally yielded less item-level missing data, produced cleaner data and therefore were less costly to process, and were as palatable to participants as self-administered diaries. Except for reports of drinking and vegetable consumption, telephone and diary conditions did not differ in the amount of behavior reported; more drinking and vegetable consumption were reported with telephone interviews, however. Telephone interviews also imposed considerably higher overall personnel costs.

Mass production of chemicals from biomass-derived oil by directly atmospheric distillation coupled with co-pyrolysis

PubMed Central

Zhang, Xue-Song; Yang, Guang-Xi; Jiang, Hong; Liu, Wu-Jun; Ding, Hong-Sheng

2013-01-01

Production of renewable commodity chemicals from bio-oil derived from fast pyrolysis of biomass has received considerable interests, but hindered by the presence of innumerable components in bio-oil. In present work, we proposed and experimentally demonstrated an innovative approach combining atmospheric distillation of bio-oil with co-pyrolysis for mass production of renewable chemicals from biomass, in which no waste was produced. It was estimated that 51.86 wt.% of distillate just containing dozens of separable organic components could be recovered using this approach. Ten protogenetic and three epigenetic compounds in distillate were qualitatively identified by gas chromatography/mass spectrometry and quantified by gas chromatography. Among them, the recovery efficiencies of acetic acid, propanoic acid, and furfural were all higher than 80 wt.%. Formation pathways of the distillate components in this process were explored. This work opens up a fascinating prospect for mass production of chemical feedstock from waste biomass. PMID:23350028

Estimation of optimum density and temperature for maximum efficiency of tin ions in Z discharge extreme ultraviolet sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masnavi, Majid; Nakajima, Mitsuo; Hotta, Eiki

Extreme ultraviolet (EUV) discharge-based lamps for EUV lithography need to generate extremely high power in the narrow spectrum band of 13.5{+-}0.135 nm. A simplified collisional-radiative model and radiative transfer solution for an isotropic medium were utilized to investigate the wavelength-integrated light outputs in tin (Sn) plasma. Detailed calculations using the Hebrew University-Lawrence Livermore atomic code were employed for determination of necessary atomic data of the Sn{sup 4+} to Sn{sup 13+} charge states. The result of model is compared with experimental spectra from a Sn-based discharge-produced plasma. The analysis reveals that considerably larger efficiency compared to the so-called efficiency of amore » black-body radiator is formed for the electron density {approx_equal}10{sup 18} cm{sup -3}. For higher electron density, the spectral efficiency of Sn plasma reduces due to the saturation of resonance transitions.« less

Three-dimensional phonon population anisotropy in silicon nanomembranes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McElhinny, Kyle M.; Gopalakrishnan, Gokul; Holt, Martin V.

Nanoscale single crystals possess modified phonon dispersions due to the truncation of the crystal. The introduction of surfaces alters the population of phonons relative to the bulk and introduces anisotropy arising from the breaking of translational symmetry. Such modifications exist throughout the Brillouin zone, even in structures with dimensions of several nanometers, posing a challenge to the characterization of vibrational properties and leading to uncertainty in predicting the thermal, optical, and electronic properties of nanomaterials. Synchrotron x-ray thermal diffuse scattering studies find that freestanding Si nanomembranes with thicknesses as large as 21 nm exhibit a higher scattering intensity per unitmore » thickness than bulk silicon. In addition, the anisotropy arising from the finite thickness of these membranes produces particularly intense scattering along reciprocal-space directions normal to the membrane surface compared to corresponding in-plane directions. These results reveal the dimensions at which calculations of materials properties and device characteristics based on bulk phonon dispersions require consideration of the nanoscale size of the crystal.« less

Thermoliquefaction of palm oil fiber (Elaeis sp.) using supercritical ethanol.

PubMed

Oliveira, Aline L P C; Almeida, Priscila S; Campos, Maria C V; Franceschi, Elton; Dariva, Cláudio; Borges, Gustavo R

2017-04-01

Thermoliquefaction of palm oil fiber was investigated using supercritical ethanol as solvent. A semi-continuous laboratory scale unit was developed to investigate the effects of temperature (300-500°C), heating rate (10-30°C.min -1 ) and cracking time (10-30min) on the conversion of biomass in bio-oil. The main advantage of the proposed process is that a pure solvent is pumping through the reactor that contains the biomass, dispensing the use of biomass slurries. The yield of bio-oil ranged from 56% to 84%, depending on the experimental conditions. It was observed that an increase in working temperature led to an increase in the bio-oil production. Cracking time and heating rate variation had not shown a considerable effect on the conversion of biomass. The chemical profiles of bio-oil determined by GC/MS, indicate that at low temperature mainly sugar derivatives are produced, while at higher temperatures alcohols and phenolic are the majority compounds of the bio-oil. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of anxiety on cortical cerebral blood flow and metabolism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gur, R.C.; Gur, R.E.; Resnick, S.M.

1987-04-01

The relation between anxiety and cortical activity was compared in two samples of normal volunteers. One group was studied with the noninvasive xenon-133 inhalation technique for measuring cerebral blood flow (CBF) and the other with positron emission tomography (PET) using /sup 18/Flurodeoxyglucose (/sup 18/FDG) for measuring cerebral metabolic rates (CMR) for glucose. The inhalation technique produced less anxiety than the PET procedure, and for low anxiety subjects, there was a linear increase in CBF with anxiety. For higher anxiety subjects, however, there was a linear decrease in CBF with increased anxiety. The PET group manifested a linear decrease in CMRmore » with increased anxiety. The results indicate that anxiety can have systematic effects on cortical activity, and this should be taken into consideration when comparing data from different procedures. They also suggest a physiologic explanation of a fundamental behavioral law that stipulates a curvilinear, inverted-U relationship between anxiety and performance.« less

Type17 T-cells in Central Nervous System Autoimmunity and Tumors

PubMed Central

Okada, Hideho; Khoury, Samia J.

2012-01-01

Interleukin-17 (IL-17) producing Type17 T-cells, specifically T-helper (Th)17 cells reactive to central nervous system (CNS) autoantigens, manifest a higher migratory capability to the CNS parenchyma compared with other T-cell subpopulations due to their ability to penetrate the blood brain barrier (BBB). In the field of cancer immunotherapy, there are now a number of cell therapy approaches including early studies using T-cells transduced with chimeric antigen receptors in hematologic malignancy, suggesting that the use of T-cells or genetically modified T-cells could have a significant role in effective cancer therapy. However, the successful application of this strategy in solid tumors, such as CNS tumors, requires careful consideration of critical factors to improve the tumor-homing of T-cells. The current review is dedicated to discuss recent findings on the role of Type17 T-cells in CNS autoimmunity and cancer. The insight gained from these findings may lead to the development of novel therapeutic and prophylactic strategies for CNS autoimmunity and tumors. PMID:22454247

Deterministic optical polarisation in nitride quantum dots at thermoelectrically cooled temperatures.

PubMed

Wang, Tong; Puchtler, Tim J; Patra, Saroj K; Zhu, Tongtong; Jarman, John C; Oliver, Rachel A; Schulz, Stefan; Taylor, Robert A

2017-09-21

We report the successful realisation of intrinsic optical polarisation control by growth, in solid-state quantum dots in the thermoelectrically cooled temperature regime (≥200 K), using a non-polar InGaN system. With statistically significant experimental data from cryogenic to high temperatures, we show that the average polarisation degree of such a system remains constant at around 0.90, below 100 K, and decreases very slowly at higher temperatures until reaching 0.77 at 200 K, with an unchanged polarisation axis determined by the material crystallography. A combination of Fermi-Dirac statistics and k·p theory with consideration of quantum dot anisotropy allows us to elucidate the origin of the robust, almost temperature-insensitive polarisation properties of this system from a fundamental perspective, producing results in very good agreement with the experimental findings. This work demonstrates that optical polarisation control can be achieved in solid-state quantum dots at thermoelectrically cooled temperatures, thereby opening the possibility of polarisation-based quantum dot applications in on-chip conditions.

Biogenic twinned crystals exhibiting unique morphological symmetry

NASA Astrophysics Data System (ADS)

Hirsch, Anna; Gur, Dvir; Palmer, Ben; Addadi, Lia; Leiserowitz, Leslie; Kronik, Leeor

Guanine crystals are widely used in nature as components of multilayer reflectors. Organisms control the size, morphology, and arrangement of these crystals, to obtain a variety of optical ''devices''. The reflection systems found in the lens of the scallop eye and in the copepod cuticle are unique in that the multilayered reflectors are tiled together to form a contiguous packed array. In the former, square crystals are tiled to form a reflecting mirror. In the latter, hexagonal crystals are closely packed to produce brilliant colors. Based on electron diffraction, morphology considerations, and density functional theory, these crystals were shown to possess similar monoclinic crystal symmetry, which we have previously identified as different from that of synthetic anhydrous guanine. However, the crystals are different in that multiple twinning about the {012} and the {011} crystallographic planes results in square and hexagonal morphology, respectively. This is a unique example where controlled twinning is used as a strategy to form a morphology with higher symmetry than that of the underlying crystal, allowing for tilling that facilitates optical functionality.

Evaluation of two outlier-detection-based methods for detecting tissue-selective genes from microarray data.

PubMed

Kadota, Koji; Konishi, Tomokazu; Shimizu, Kentaro

2007-05-01

Large-scale expression profiling using DNA microarrays enables identification of tissue-selective genes for which expression is considerably higher and/or lower in some tissues than in others. Among numerous possible methods, only two outlier-detection-based methods (an AIC-based method and Sprent's non-parametric method) can treat equally various types of selective patterns, but they produce substantially different results. We investigated the performance of these two methods for different parameter settings and for a reduced number of samples. We focused on their ability to detect selective expression patterns robustly. We applied them to public microarray data collected from 36 normal human tissue samples and analyzed the effects of both changing the parameter settings and reducing the number of samples. The AIC-based method was more robust in both cases. The findings confirm that the use of the AIC-based method in the recently proposed ROKU method for detecting tissue-selective expression patterns is correct and that Sprent's method is not suitable for ROKU.

Microwave plasma synthesis of Si/Ge and Si/WSi2 nanoparticles for thermoelectric applications

NASA Astrophysics Data System (ADS)

Petermann, Nils; Schneider, Tom; Stötzel, Julia; Stein, Niklas; Weise, Claudia; Wlokas, Irenäus; Schierning, Gabi; Wiggers, Hartmut

2015-08-01

The utilization of microwave-based plasma systems enables a contamination-free synthesis of highly specific nanoparticles in the gas phase. A reactor setup allowing stable, long-term operation was developed with the support of computational fluid dynamics. This paper highlights the prospects of gas-phase plasma synthesis to produce specific materials for bulk thermoelectrics. Taking advantage of specific plasma reactor properties such as Coulomb repulsion in combination with gas temperatures considerably higher than 1000 K, spherical and non-aggregated nanoparticles of multiple compositions are accessible. Different strategies towards various nanostructured composites and alloys are discussed. It is shown that, based on doped silicon/germanium alloys and composites, thermoelectric materials with zT values up to almost unity can be synthesized in one step. First experimental results concerning silicon/tungsten silicide thermoelectrics applying the nanoparticle-in-alloy idea are presented indicating that this concept might work. However, it is found that tungsten silicides show a surprising sinter activity more than 1000 K below their melting temperature.

Facile Synthesis and Characterization of Ag₃PO₄ Microparticles for Degradation of Organic Dyestuffs under White-Light Light-Emitting-Diode Irradiation.

PubMed

Tseng, Chi-Shun; Wu, Tsunghsueh; Lin, Yang-Wei

2018-04-30

This study demonstrated facile synthesis of silver phosphate (Ag₃PO₄) photocatalysts for the degradation of organic contaminants. Ag₃PO₄ microparticles from different concentrations of precursor, AgNO₃, were produced and characterized by scanning electron microscopy, powder X-ray diffraction, and UV⁻visible diffuse reflectance spectroscopy. Degradation rates of methylene blue (MB) and phenol were measured in the presence of microparticles under low-power white-light light-emitting-diode (LED) irradiation and the reaction rate followed pseudo-first-order kinetics. The prepared Ag₃PO₄ microparticles displayed considerably high photocatalytic activity (>99.8% degradation within 10 min). This can be attributed to the microparticles' large surface area, the low recombination rate of electron⁻hole pairs and the higher charge separation efficiency. The practicality of the Ag₃PO₄ microparticles was validated by the degradation of MB, methyl red, acid blue 1 and rhodamine B under sunlight in environmental water samples, demonstrating the benefit of the high photocatalytic activity from Ag₃PO₄ microparticles.

Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation

NASA Astrophysics Data System (ADS)

Sang, Wong Yean; Ching, Oh Pei

2017-10-01

Mobil Composition of Matter-41 (MCM-41) is recognized as a potential filler to enhance permeability of mixed matrix membrane (MMM). However, the required loading for available micron-sized MCM-41 was considerably high in order to achieve desired separation performance. In this work, reduced-size MCM-41 was synthesized to minimize filler loading, improve surface modification and enhance polymer-filler compatibility during membrane fabrication. The effect of reaction condition, stirring rate and type of post-synthesis washing solution used on particle diameter of resultant MCM-41 were investigated. It was found that MCM-41 produced at room temperature condition yield particles with smaller diameter, higher specific surface area and enhanced mesopore structure. Increase of stirring rate up to 500 rpm during synthesis also reduced the particle diameter. In addition, replacing water with methanol as the post-synthesis washing solution to remove bromide ions from the precipitate was able to further reduce the particle size by inhibiting polycondensation reaction.

Influence of Solute Content and Solidification Parameters on Grain Refinement of Aluminum Weld Metal

NASA Astrophysics Data System (ADS)

Schempp, Philipp; Cross, Carl Edward; Pittner, Andreas; Rethmeier, Michael

2013-07-01

Grain refinement provides an important possibility to enhance the mechanical properties ( e.g., strength and ductility) and the weldability (susceptibility to solidification cracking) of aluminum weld metal. In the current study, a filler metal consisting of aluminum base metal and different amounts of commercial grain refiner Al Ti5B1 was produced. The filler metal was then deposited in the base metal and fused in a GTA welding process. Additions of titanium and boron reduced the weld metal mean grain size considerably and resulted in a transition from columnar to equiaxed grain shape ( CET). In commercial pure aluminum (Alloy 1050A), the grain-refining efficiency was higher than that in the Al alloys 6082 and 5083. Different welding and solidification parameters influenced the grain size response only slightly. Furthermore, the observed grain-size reduction was analyzed by means of the undercooling parameter P and the growth restriction parameter Q, which revealed the influence of solute elements and nucleant particles on grain size.

Towards High-Energy-Density Pseudocapacitive Flowable Electrodes by the Incorporation of Hydroquinone

DOE PAGES

Boota, M.; Hatzell, K. B.; Kumbur, E. C.; ...

2015-01-29

Our study reports an investigation of hydroquinone (HQ) as a multielectron organic redox molecule to enhance the performance of flowable electrodes. Moreover, two different methods to produce high-performance pseudocapacitive flowable electrodes were investigated for electrochemical flow capacitors. First, HQ molecules were deposited on carbon spheres (CSs) by a self-assembly approach using various HQ loadings. In the second approach, HQ was used as a redox-mediating agent in the electrolyte. Flowable electrodes composed of HQ showed a capacitance of 342 Fg 1, which is >200% higher than that of flowable electrodes based on nontreated CSs (160 Fg 1), and outperformed (in gravimetricmore » performance) many reported film electrodes. A similar trend in capacitance was observed if HQ was used as a redox agent in the electrolyte; however, its poor cycle life restricted further consideration. Additionally, a twofold increase in capacitance was observed under flow conditions compared to that of previous studies.« less

Planetary-scale surface water detection from space

NASA Astrophysics Data System (ADS)

Donchyts, G.; Baart, F.; Winsemius, H.; Gorelick, N.

2017-12-01

Accurate, efficient and high-resolution methods of surface water detection are needed for a better water management. Datasets on surface water extent and dynamics are crucial for a better understanding of natural and human-made processes, and as an input data for hydrological and hydraulic models. In spite of considerable progress in the harmonization of freely available satellite data, producing accurate and efficient higher-level surface water data products remains very challenging. This presentation will provide an overview of existing methods for surface water extent and change detection from multitemporal and multi-sensor satellite imagery. An algorithm to detect surface water changes from multi-temporal satellite imagery will be demonstrated as well as its open-source implementation (http://aqua-monitor.deltares.nl). This algorithm was used to estimate global surface water changes at high spatial resolution. These changes include climate change, land reclamation, reservoir construction/decommissioning, erosion/accretion, and many other. This presentation will demonstrate how open satellite data and open platforms such as Google Earth Engine have helped with this research.

Current therapeutic landscape for advanced gastroesophageal cancers

PubMed Central

Lopez, Anthony; Harada, Kazuto; Mizrak Kaya, Dilsa

2018-01-01

Treatment of advanced gastroesophageal cancers remains challenging for clinicians, patients, and caregivers alike. Despite considerable research, the therapeutic armamentarium is restricted and hardly personalized. In the first-line setting, trastuzumab with a fluoropyrimidine and platinum agent is the standard-of-care in patients with HER2-positive tumor. For the others, a platinum-based doublet (preferably with oxaliplatin) is recommended. Three-drug cytotoxic regimens should be reserved for exceptional cases where patients have good performance status. Triple combinations produce higher toxicity and provide marginal advantage. In the second line setting, the combination of paclitaxel and ramucirumab is preferred over all others. Currently, nothing is approved in the 3rd or later line. Nivolumab has resulted in an improved benefit in an Asian trial. Early trials of TAS-102, STAT3 inhibitors, anti-claudin 18.2 and other immune checkpoint inhibitors (alone or in combination) are ongoing. However, development of reproducible biomarkers for patient enrichment is critical for future progress. PMID:29666801

Emulsions of crude glycerin from biodiesel processing with fuel oil for industrial heating.

PubMed

Mize, Hannah E; Lucio, Anthony J; Fhaner, Cassie J; Pratama, Fredy S; Robbins, Lanny A; Karpovich, David S

2013-02-13

There is considerable interest in using crude glycerin from biodiesel production as a heating fuel. In this work crude glycerin was emulsified into fuel oil to address difficulties with ignition and sustained combustion. Emulsions were prepared with several grades of glycerin and two grades of fuel oil using direct and phase inversion emulsification. Our findings reveal unique surfactant requirements for emulsifying glycerin into oil; these depend on the levels of several contaminants, including water, ash, and components in MONG (matter organic non-glycerin). A higher hydrophile-lipophile balance was required for a stable emulsion of crude glycerin in fuel oil compared to water in fuel oil. The high concentration of salts from biodiesel catalysts generally hindered emulsion stability. Geometric close-packing of micelles was carefully balanced to mechanically stabilize emulsions while also enabling low viscosity for pumping and fuel injection. Phase inversion emulsification produced more stable emulsions than direct emulsification. Emulsions were tested successfully as fuel for a waste oil burner.

Estimating Demand for Higher Education Services. Planning for Higher Education; Vol. 3; No. 3; June 1974.

ERIC Educational Resources Information Center

Kicinski, Walter T.; Soss, Neal M.

Changing patterns of demand for higher education services have generated considerable interest in research into the factors governing the choices students make when they apply to colleges and universities. During 1973, the staff of the State Budget Division of New York State undertook the task of creating a general model of the demand for college…

Not All Markets Are Created Equal: Re-Conceptualizing Market Elements in Higher Education

ERIC Educational Resources Information Center

Jungblut, Jens; Vukasovic, Martina

2018-01-01

Increasing reliance on market mechanisms in higher education is analysed both as one of the approaches to steering as well as in relation to the consequences of markets for quality and accessibility of higher education. This article goes beyond the normative considerations of market elements as inherently good or bad and the economic theory-guided…

State Budgeting for Higher Education: Trends in State Revenue Appropriations from 1968 to 1977.

ERIC Educational Resources Information Center

Ruyle, Janet H.; Glenny, Lyman A.

Results of a ten-year review of state appropriations for higher education in the states are presented. Findings reveal a wide range of differences among the regions of the nation and among the individual states. The share of education appropriations received by higher education institutions has grown considerably, with the greatest rate of growth…

Conceptualising Food Research in Higher Education as a Matter of Social Justice: Philosophical, Methodological and Ethical Considerations

ERIC Educational Resources Information Center

Dominguez-Whitehead, Yasmine

2017-01-01

Globally, food concerns in higher education have emerged as an issue of critical importance. Food acquisition struggles and high rates of food insecurity among students have been documented, yet food within higher education continues to be an under-researched area of study. This paper calls for advancing research that critically engages with food…

Production and characterization of in planta transiently produced polygalacturanase from Aspergillus niger and its fusions with hydrophobin or ELP tags.

PubMed

Pereira, Eridan Orlando; Kolotilin, Igor; Conley, Andrew Jonathan; Menassa, Rima

2014-06-27

Pectinases play an important role in plant cell wall deconstruction and have potential in diverse industries such as food, wine, animal feed, textile, paper, fuel, and others. The demand for such enzymes is increasing exponentially, as are the efforts to improve their production and to implement their use in several industrial processes. The goal of this study was to examine the potential of producing polygalacturonase I from Aspergillus niger in plants and to investigate the effects of subcellular compartmentalization and protein fusions on its accumulation and activity. Polygalacturonase I from Aspergillus niger (AnPGI) was transiently produced in Nicotiana benthamiana by targeting it to five different cellular compartments: apoplast, endoplasmic reticulum (ER), vacuole, chloroplast and cytosol. Accumulation levels of 2.5%, 3.0%, and 1.9% of total soluble protein (TSP) were observed in the apoplast, ER, and vacuole, respectively, and specific activity was significantly higher in vacuole-targeted AnPGI compared to the same enzyme targeted to the ER or apoplast. No accumulation was found for AnPGI when targeted to the chloroplast or cytosol. Analysis of AnPGI fused with elastin-like polypeptide (ELP) revealed a significant increase in the protein accumulation level, especially when targeted to the vacuole where the protein doubles its accumulation to 3.6% of TSP, while the hydrophobin (HFBI) fusion impaired AnPGI accumulation and both tags impaired activity, albeit to different extents. The recombinant protein showed activity against polygalacturonic acid with optimum conditions at pH 5.0 and temperature from 30 to 50°C, depending on its fusion. In vivo analysis of reducing sugar content revealed a higher release of reducing sugars in plant tissue expressing recombinant AnPGI compared to wild type N. benthamiana leaves. Our results demonstrate that subcellular compartmentalization of enzymes has an impact on both the target protein accumulation and its activity, especially in the case of proteins that undergo post-translational modifications, and should be taken into consideration when protein production strategies are designed. Using plants to produce heterologous enzymes for the degradation of a key component of the plant cell wall could reduce the cost of biomass pretreatment for the production of cellulosic biofuels.

Production and characterization of in planta transiently produced polygalacturanase from Aspergillus niger and its fusions with hydrophobin or ELP tags

PubMed Central

2014-01-01

Background Pectinases play an important role in plant cell wall deconstruction and have potential in diverse industries such as food, wine, animal feed, textile, paper, fuel, and others. The demand for such enzymes is increasing exponentially, as are the efforts to improve their production and to implement their use in several industrial processes. The goal of this study was to examine the potential of producing polygalacturonase I from Aspergillus niger in plants and to investigate the effects of subcellular compartmentalization and protein fusions on its accumulation and activity. Results Polygalacturonase I from Aspergillus niger (AnPGI) was transiently produced in Nicotiana benthamiana by targeting it to five different cellular compartments: apoplast, endoplasmic reticulum (ER), vacuole, chloroplast and cytosol. Accumulation levels of 2.5%, 3.0%, and 1.9% of total soluble protein (TSP) were observed in the apoplast, ER, and vacuole, respectively, and specific activity was significantly higher in vacuole-targeted AnPGI compared to the same enzyme targeted to the ER or apoplast. No accumulation was found for AnPGI when targeted to the chloroplast or cytosol. Analysis of AnPGI fused with elastin-like polypeptide (ELP) revealed a significant increase in the protein accumulation level, especially when targeted to the vacuole where the protein doubles its accumulation to 3.6% of TSP, while the hydrophobin (HFBI) fusion impaired AnPGI accumulation and both tags impaired activity, albeit to different extents. The recombinant protein showed activity against polygalacturonic acid with optimum conditions at pH 5.0 and temperature from 30 to 50°C, depending on its fusion. In vivo analysis of reducing sugar content revealed a higher release of reducing sugars in plant tissue expressing recombinant AnPGI compared to wild type N. benthamiana leaves. Conclusion Our results demonstrate that subcellular compartmentalization of enzymes has an impact on both the target protein accumulation and its activity, especially in the case of proteins that undergo post-translational modifications, and should be taken into consideration when protein production strategies are designed. Using plants to produce heterologous enzymes for the degradation of a key component of the plant cell wall could reduce the cost of biomass pretreatment for the production of cellulosic biofuels. PMID:24970673

APPLICATIONS OF BOREHOLE-ACOUSTIC METHODS IN ROCK MECHANICS.

USGS Publications Warehouse

Paillet, Frederick L.

1985-01-01

Acoustic-logging methods using a considerable range of wavelengths and frequencies have proven very useful in the in situ characterization of deeply buried crystalline rocks. Seismic velocities are useful in investigating the moduli of unfractured rock, and in producing a continuous record of rock quality for comparison with discontinuous intervals of core. The considerable range of frequencies makes the investigation of scale effects possible in both fractured and unfractured rock. Several specific methods for the characterization of in situ permeability have been developed and verified in the field.

A novel synthesis of a new thorium (IV) metal organic framework nanostructure with well controllable procedure through ultrasound assisted reverse micelle method.

PubMed

Sargazi, Ghasem; Afzali, Daryoush; Mostafavi, Ali

2018-03-01

Reverse micelle (RM) and ultrasound assisted reverse micelle (UARM) were applied to the synthesis of novel thorium nanostructures as metal organic frameworks (MOFs). Characterization with different techniques showed that the Th-MOF sample synthesized by UARM method had higher thermal stability (354°C), smaller mean particle size (27nm), and larger surface area (2.02×10 3 m 2 /g). Besides, in this novel approach, the nucleation of crystals was found to carry out in a shorter time. The synthesis parameters of UARM method were designed by 2 k-1 factorial and the process control was systematically studied using analysis of variance (ANOVA) and response surface methodology (RSM). ANOVA showed that various factors, including surfactant content, ultrasound duration, temperature, ultrasound power, and interaction between these factors, considerably affected different properties of the Th-MOF samples. According to the 2 k-1 factorial design, the determination coefficient (R 2 ) of the model is 0.999, with no significant lack of fit. The F value of 5432, implied that the model was highly significant and adequate to represent the relationship between the responses and the independent variables, also the large R-adjusted value indicates a good relationship between the experimental data and the fitted model. RSM predicted that it would be possible to produce Th-MOF samples with the thermal stability of 407°C, mean particle size of 13nm, and surface area of 2.20×10 3 m 2 /g. The mechanism controlling the Th-MOF properties was considerably different from the conventional mechanisms. Moreover, the MOF sample synthesized using UARM exhibited higher capacity for nitrogen adsorption as a result of larger pore sizes. It is believed that the UARM method and systematic studies developed in the present work can be considered as a new strategy for their application in other nanoscale MOF samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Technological, rheological and sensory characterizations of a yogurt containing an exopolysaccharide extract from Lactobacillus fermentum Lf2, a new food additive.

PubMed

Ale, Elisa C; Perezlindo, Marcos J; Pavón, Yanina; Peralta, Guillermo H; Costa, Silvia; Sabbag, Nora; Bergamini, Carina; Reinheimer, Jorge A; Binetti, Ana G

2016-12-01

Lactobacillus fermentum Lf2, an autochthonous strain isolated as a non starter culture in Cremoso cheese, produces high EPS levels (~1g/L) in optimized conditions (SDM broth, pH6.0, 30°C, 72h). Technological (texture profile and rheological analysis) and sensory properties of non-fat yogurts with 300 and 600mg EPS/L were studied at 3 and 25days after manufacture. Yogurts with different EPS concentrations showed higher hardness values than the control group at both periods of time, being the only significant difference that remained stable during time. The consistency index was also higher for the treated samples at both times evaluated, being significantly different for samples with 300mg/L of EPS extract, while the flow behavior index was lower for EPS-added yogurts. The thixotropic index was lower (P<0.05) for samples with the highest EPS extract concentration at the end of the storage time. Regarding the sensory analysis, those yogurts with 600mg/L of EPS extract presented the highest values of consistency at 3days of storage. No considerable differences for defects (milk powder, acid, bitter and cooked milk flavors) were perceived between treated and control samples at both times evaluated. Syneresis was also studied and samples with 600mg/L of EPS extract presented the lowest syneresis values at 25days of storage, which considerably decreased with the time of storage. In conclusion, the EPS from L. fermentum Lf2, used as an additive, provided yogurt with creamy consistency and increased hardness, without the presence of unwanted defects and improving the water holding capacity of the product. All the analysis done showed the potential of this extract to be used as a technofunctional natural ingredient, and it should be considered its positive impact on health, according to previous studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Study of clamping-induced deformations on SR optics by means of LTP

NASA Astrophysics Data System (ADS)

Cocco, Daniele; Sostero, Giovanni; Zangrando, Marco

2001-01-01

With the advent of third generation synchrotron radiation sources, more flux was available for the experimentalist. At the same time, the request in term of spot dimension and energy resolution rapidly increased. For this reason, opticians try to design beamlines with higher and higher performances. To this end the shape of every optical component of a beamline is specified to have very tight constrains, because every small figure error produces a sudden reduction in terms of the overall performance. Nevertheless, the necessity to positioning and cooling the components implies the presence of a safe clamping system which unavoidably would modifies the shape of the component, causing possible reduction of resolving power or increasing the spot dimension. Thus it is not sufficient to measure accurately the slope or the profile of a mirror in laboratory before the mounting, but it is useful to test it also after this procedure. We, at ELETTRA, have measured by means of a modified version of the LTP II (Long Trace Profiler) several mirrors and gratings before and after their clamping, in order to estimate the effect of the holder on the final performances of the beamlines. Since our LTP II measures directly the local slope of the surface under test with a repeatability better than 0.02 arcsec on a 1 meter long optical surface, it is very easy to single out any small distortion of the tangential profile introduced by the mounting system. Different kinds of supports for both small and large optical elements, were taken into consideration and the effect of the deformation induced by them on the beamline performance was simulated and will be presented here together with the results of each measurements. The results give us a way to select properly the kind of clamping and invite the opticians to try to take into consideration also this effect before designing a complex beamline.

Nitrogen Concentrations and Isotopic Compositions of Seafloor-Altered Terrestrial Basaltic Glass: Implications for Astrobiology

PubMed Central

Banerjee, N.R.; Izawa, M.R.M.; Kobayashi, K.; Lazzeri, K.; Ranieri, L.A.; Nakamura, E.

2018-01-01

Abstract Observed enrichments of N (and the δ15N of this N) in volcanic glasses altered on Earth's modern and ancient seafloor are relevant in considerations of modern global N subduction fluxes and ancient life on Earth, and similarly altered glasses on Mars and other extraterrestrial bodies could serve as valuable tracers of biogeochemical processes. Palagonitized glasses and whole-rock samples of volcanic rocks on the modern seafloor (ODP Site 1256D) contain 3–18 ppm N with δ15Nair values of up to +4.5‰. Variably altered glasses from Mesozoic ophiolites (Troodos, Cyprus; Stonyford volcanics, USA) contain 2–53 ppm N with δ15N of −6.3 to +7‰. All of the more altered glasses have N concentrations higher than those of fresh volcanic glass (for MORB, <2 ppm N), reflecting significant N enrichment, and most of the altered glasses have δ15N considerably higher than that of their unaltered glass equivalents (for MORB, −5 ± 2‰). Circulation of hydrothermal fluids, in part induced by nearby spreading-center magmatism, could have leached NH4+ from sediments then fixed this NH4+ in altering volcanic glasses. Glasses from each site contain possible textural evidence for microbial activity in the form of microtubules, but any role of microbes in producing the N enrichments and elevated δ15N remains uncertain. Petrographic analysis, and imaging and chemical analyses by scanning electron microscopy and scanning transmission electron microscopy, indicate the presence of phyllosilicates (smectite, illite) in both the palagonitized cracks and the microtubules. These phyllosilicates (particularly illite), and possibly also zeolites, are the likely hosts for N in these glasses. Key Words: Nitrogen—Nitrogen isotope—Palagonite—Volcanic glass—Mars. Astrobiology 18, 330–342. PMID:29106312

Antibiotic resistance in bacteria associated with food animals: a United States perspective of livestock production.

PubMed

Mathew, Alan G; Cissell, Robin; Liamthong, S

2007-01-01

The use of antimicrobial compounds in food animal production provides demonstrated benefits, including improved animal health, higher production and, in some cases, reduction in foodborne pathogens. However, use of antibiotics for agricultural purposes, particularly for growth enhancement, has come under much scrutiny, as it has been shown to contribute to the increased prevalence of antibiotic-resistant bacteria of human significance. The transfer of antibiotic resistance genes and selection for resistant bacteria can occur through a variety of mechanisms, which may not always be linked to specific antibiotic use. Prevalence data may provide some perspective on occurrence and changes in resistance over time; however, the reasons are diverse and complex. Much consideration has been given this issue on both domestic and international fronts, and various countries have enacted or are considering tighter restrictions or bans on some types of antibiotic use in food animal production. In some cases, banning the use of growth-promoting antibiotics appears to have resulted in decreases in prevalence of some drug resistant bacteria; however, subsequent increases in animal morbidity and mortality, particularly in young animals, have sometimes resulted in higher use of therapeutic antibiotics, which often come from drug families of greater relevance to human medicine. While it is clear that use of antibiotics can over time result in significant pools of resistance genes among bacteria, including human pathogens, the risk posed to humans by resistant organisms from farms and livestock has not been clearly defined. As livestock producers, animal health experts, the medical community, and government agencies consider effective strategies for control, it is critical that science-based information provide the basis for such considerations, and that the risks, benefits, and feasibility of such strategies are fully considered, so that human and animal health can be maintained while at the same time limiting the risks from antibiotic-resistant bacteria.

76 FR 35672 - Revised Effectiveness Determination; Sunscreen Drug Products for Over-the-Counter Human Use

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

... are given ultraviolet (UV) radiation doses produced by a solar simulator (i.e., a UV lamp). Under... increasingly higher UV doses produced by the solar simulator. However, because the solar simulator can produce far higher UV radiation doses than a consumer would ever receive even under the most severe sun...

Electrolysis cell for the manufacture of persulfates

NASA Technical Reports Server (NTRS)

Cueto, J. M.

1986-01-01

A cell for the electrolytic generation of persulfates, characterized by the fact that a housing acts as cathode, is made of metal, and consists of a lower electrolytically active section and an upper electrolytically inactive section. It is designed so that there is produced the greatest possible current density suited to produce the desired electrolysis effect. This invention, compared to the devices used until now, exhibits considerable advantages whereby it is particularly suited for the production of potassium persulfate.

Need for immunologic stimulators during immunosuppression produced by major cancer surgery.

PubMed Central

Cole, W H; Humphrey, L

1985-01-01

Although surgery, radiology, and anticancer chemicals have been effective in the treatment of cancer, the immunologic phase of therapy deserves more effort and thought, because the possibilities are considerable. However, the immunologic phase is so complicated that, without the advances made during the past few years, little could be expected from immunology. The focus of this paper is on the immunosuppression produced by major cancer operations, at which time the patient needs immunologic help. PMID:3893336

Furthering Higher Education Possibilities through Massive Open Online Courses

ERIC Educational Resources Information Center

Mesquita, Anabela, Ed.; Peres, Paula, Ed.

2015-01-01

In recent years, technological advancements have enabled higher-learning institutions to offer millions of independent learners the opportunity to participate in open-access online courses. As this practice expands, drawing considerable media attention, questions continue to arise regarding pedagogical methodology and the long-term viability of…

Donor Behavior and Voluntary Support for Higher Education Institutions.

ERIC Educational Resources Information Center

Leslie, Larry L.; Ramey, Garey

Voluntary support of higher education in America is investigated through regression analysis of institutional characteristics at two points in time. The assumption of donor rationality together with explicit consideration of interorganizational relationships offers a coherent framework for the analysis of voluntary support by the major…

Resisting Consumerist Rationalities in Higher Vocational Education

ERIC Educational Resources Information Center

Puaca, Goran; Theandersson, Christer; Carlén, Margareta

2017-01-01

Swedish higher education policy is currently moving toward consumption ideals that focus on promoting the efficiency and economic viability of student choices. This paper scrutinizes students' practical considerations when making decisions regarding their education and future occupations and the choice rationalities and motives that these reflect.…

Educators Adopting M-Learning: Is It Sustainable in Higher Education?

ERIC Educational Resources Information Center

Sanderson, Nicole; Hanbidge, Alice Schmidt

2017-01-01

Effectively integrating m-learning into higher education necessitates consideration for both student and educator adoption factors. Data collected from 309 Canadian university participants in a Mobile Information Literacy (MIL) research study identified specific student m-learning adoption factors and substantiated those in the literature (Navarro…

Contractual Relationships: Higher Education Laws and Regulations

ERIC Educational Resources Information Center

Chatterjee, Tantralita

2011-01-01

One major aspect of any contractual relationship is liability. "Institutions of higher education face potential breach of contract claims from employees, student, and vendors purchasers, or business partners" (Kaplin & Lee, 2007, 105) When referring to the liability of an institution, we must take into consideration the contract…

Higher Education and State Legitimation in Cyprus.

ERIC Educational Resources Information Center

Persianis, Panayiotis

1999-01-01

Investigates Cyprus' utilization of higher education policy as compensatory legitimization. Argues that establishment of the University of Cyprus (following considerable political opposition and hesitation over the years) and the character of the state-based university, which is linked to the international community of scholarship, result from the…

Geothermal Energy in Planetary Icy Large Objects via Cosmic Rays Muon–Catalyzed Fusion

NASA Astrophysics Data System (ADS)

de Morais, A.

2018-05-01

We propose the possibility that muon-catalyzed fusion, produced by cosmic rays, might add energy to the interior of planetary icy large objects of the solar system, and other solar systems, interesting for astrobiological considerations.

Commentary: Writing and evaluating qualitative research reports

USDA-ARS?s Scientific Manuscript database

An overview of qualitative methods is provided, particularly for reviewers and authors who may be less familiar with qualitative research. A question and answer format is used to address considerations for writing and evaluating qualitative research. When producing qualitative research, individuals ...

INTEGRATIVE CONSIDERATIONS IN WATERSHED PLANNING

EPA Science Inventory

Understanding the filters through which society views the values produced by watersheds is key to developing effective and adaptable watershed plans, and ultimately a measure of how well policy makers are likely to meet a sustainability, or any other, intent. Many natural resour...

MECHANISTIC CONSIDERATIONS FOR FORMALDEHYDE-INDUCED BRONCHOCONSTRICTION INVOLVING S-NITROSOGLUTATHIONE REDUCTASE

EPA Science Inventory

Inhalation of formaldehyde vapor has long been suspected of producing airway pathophysiology such as asthma and hyperresponsivity, presumably via irritant mechanisms. Recent studies on asthma and airway biology implicate changes in nitric oxide (NO) disposition in the adverse eff...

Concerning steric effects in antimalarial agents.

PubMed

Newman, M S

1987-05-01

Acridine, the parent nucleus of atabrine, is much more toxic than its 4,5-dimethyl derivative. The 4,5-dimethyl derivative of atabrine was therefore synthesized in the hope of producing a better-tolerated drug. The analogue was considerably more toxic than atabrine.

Impact of test sensitivity and specificity on pig producer incentives to control Mycobacterium avium infections in finishing pigs.

PubMed

van Wagenberg, Coen P A; Backus, Gé B C; Wisselink, Henk J; van der Vorst, Jack G A J; Urlings, Bert A P

2013-09-01

In this paper we analyze the impact of the sensitivity and specificity of a Mycobacterium avium (Ma) test on pig producer incentives to control Ma in finishing pigs. A possible Ma control system which includes a serodiagnostic test and a penalty on finishing pigs in herds detected with Ma infection was modelled. Using a dynamic optimization model and a grid search of deliveries of herds from pig producers to slaughterhouse, optimal control measures for pig producers and optimal penalty values for deliveries with increased Ma risk were identified for different sensitivity and specificity values. Results showed that higher sensitivity and lower specificity induced use of more intense control measures and resulted in higher pig producer costs and lower Ma seroprevalence. The minimal penalty value needed to comply with a threshold for Ma seroprevalence in finishing pigs at slaughter was lower at higher sensitivity and lower specificity. With imperfect specificity a larger sample size decreased pig producer incentives to control Ma seroprevalence, because the higher number of false positives resulted in an increased probability of rejecting a batch of finishing pigs irrespective of whether the pig producer applied control measures. We conclude that test sensitivity and specificity must be considered in incentive system design to induce pig producers to control Ma in finishing pigs with minimum negative effects. Copyright © 2013 Elsevier B.V. All rights reserved.

Antiferromagnetic and topological states in silicene: A mean field study

NASA Astrophysics Data System (ADS)

Liu, Feng; Liu, Cheng-Cheng; Yao, Yu-Gui

2015-08-01

It has been widely accepted that silicene is a topological insulator, and its gap closes first and then opens again with increasing electric field, which indicates a topological phase transition from the quantum spin Hall state to the band insulator state. However, due to the relatively large atomic spacing of silicene, which reduces the bandwidth, the electron-electron interaction in this system is considerably strong and cannot be ignored. The Hubbard interaction, intrinsic spin orbital coupling (SOC), and electric field are taken into consideration in our tight-binding model, with which the phase diagram of silicene is carefully investigated on the mean field level. We have found that when the magnitudes of the two mass terms produced by the Hubbard interaction and electric potential are close to each other, the intrinsic SOC flips the sign of the mass term at either K or K‧ for one spin and leads to the emergence of the spin-polarized quantum anomalous Hall state. Project supported by the National Key Basic Research Program of China (Grant Nos. 2014CB920903, 2013CB921903, 2011CBA00108, and 2012CB937500), the National Natural Science Foundation of China (Grant Nos. 11021262, 11172303, 11404022, 11225418, and 11174337), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20121101110046), the Excellent Young Scholars Research Fund of Beijing Institute of Technology (Grant No. 2014CX04028), and the Basic Research Funds of Beijing Institute of Technology (Grant No. 20141842001).

Growth changes of the bloater (Coregonus hoyi) of the Apostle Islands region of Lake Superior

USGS Publications Warehouse

Dryer, William R.; Beil, Joseph

1968-01-01

Studies were based primarily on 3,097 bloaters collected in experimental gill nets and bottom trawls fished in 1958-65 in the Apostle Islands region of Lake Superior. The average size of bloaters increased considerably during the period. The percentage longer than 8.9 inches increased from 45% in 1959 to 99% in 1965. Calculated lengths were without exception higher in 1962-65 than in 1958-61. Growth in length and weight showed nearly steady improvement from 1951 to 1964. The species composition of chubs has apparently changed considerably over the past 40 years. The bloater has replaced the shortjaw cisco (C. zenithicus) as the principal species in commercial landings of chubs in Wisconsin. Annulus formation of bloaters extended from mid-May to August. Growth was slow during the spring and early summer but increased sharply in August. Age-group VI was dominant in the samples. Fluctuations in year-class strength were slight. Females outnumbered males in all age groups above III. The sex composition varied according to season of capture. Some bloaters matured at age II and all fish older than III were mature. The shortest length of mature bloaters was 6.0 inches for males and 7.0 inches for females; all fish longer than 8.4 inches were mature. Apostle Island bloaters spawn principally in February and March. The average number of eggs produced by 20 females, 8.4 to 11.7 inches long, was 6,533. Crustaceans were the most common food.

A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery.

PubMed

Jung, Hun-Gi; Jang, Min Woo; Hassoun, Jusef; Sun, Yang-Kook; Scrosati, Bruno

2011-11-01

Lithium batteries are receiving considerable attention as storage devices in the renewable energy and sustainable road transport fields. However, low-cost, long-life lithium batteries with higher energy densities are required to facilitate practical application. Here we report a lithium-ion battery that can be cycled at rates as high as 10 C has a life exceeding 500 cycles and an operating temperature range extending from -20 to 55 °C. The estimated energy density is 260 W h kg(-1), which is considerably higher than densities delivered by the presently available Li-ion batteries.

Recovery considerations for possible high inclination long duration earth orbital missions

NASA Technical Reports Server (NTRS)

Obriant, T. E.; Ferguson, J. E.

1969-01-01

Problem areas are discussed and various solutions proposed. One of the major recovery problems encountered with missions having higher orbital inclinations than previous missions is the greater likelihood of severe weather conditions in the landing zones, especially if landing zones are optimized for orbital coverage considerations. Restricting the reentry window and increasing in-orbit wait times can partially eliminate the weather problem, but the possibility of emergency landings at higher latitudes still exists. It can be expected that the increased confidence level in spacecraft reliability that will exist by the time the high-inclination missions are flown will reduce the probabilities of an emergency landing in an unfavorable recovery location to a very low level.

Time-resolved emission studies of ArF-laser-produced microplasmas

NASA Astrophysics Data System (ADS)

Simeonsson, Josef B.; Miziolek, Andrzej W.

1993-02-01

ArF-laser-produced microplasmas in CO, CO2, methanol, and chloroform are studied by time-resolved emission measurements of the plasma decay. Electron densities are deduced from Stark broadening of the line profiles of atomic H, C, O, and Cl. Plasma ionization and excitation temperatures are determined from measurements of relative populations of ionic and neutral species produced in the plasmas. A discussion of the thermodynamic equilibrium status of ArF laser microplasmas is presented. In general, the ArF-laser-produced microplasma environment is found to be similar in all the gases studied, in terms of both temperature and electron density, despite the considerable differences observed in the breakdown thresholds and relative energies deposited in the various gases.

Dairy sheep production research at the University of Wisconsin-Madison, USA – a review

PubMed Central

2014-01-01

Commercial milking of sheep is a new agricultural industry in the United States starting approximately 30 yr ago. The industry is still small, but it is growing. The majority of the sheep milk is used in the production of specialty cheeses. The United States is the major importer of sheep milk cheeses with 50 to 60% of annual world exports coming to the United States during the past 20 yr. Therefore, there is considerable growth potential for the industry in the United States. The only dairy sheep research flock in North America is located at the Spooner Agricultural Research Station of the University of Wisconsin-Madison. The research program started in 1993 and has been multifaceted; dealing with several areas important to commercial dairy sheep farmers. The East Friesian and Lacaune dairy breeds were compared and introduced to the industry through the research program. Both dairy breeds produced significantly more milk than traditional meat-wool breeds found in the U.S., but the two breeds differed in their production traits. East Friesian-cross ewes produced more lambs and slightly more milk than Lacaune-cross ewes whereas Lacaune-cross ewes produced milk with a higher percentage of fat and protein than East Friesian-cross ewes. Lactation physiology studies have shown that ewes with active corpora lutea have increased milk yields, oxytocin release during milking is required to obtain normal fat percentages in the milk, large udder cisterns of dairy ewes can allow for increased milking intervals, and short daylengths during late pregnancy results in increased milk yield. In the nutrition area, legume-grass pastures and forages with a higher percentage of legume will result in increased milk production. Grazing ewes respond to additional supplementation with increased milk yield, but it is important to match the supplement to the quality of the grazing. Ewes on high quality legume-grass pastures that are high in rumen degradable protein respond with increased milk production to supplements high in energy and/or high in rumen undegraded protein. PMID:24739956

Dairy sheep production research at the University of Wisconsin-Madison, USA - a review.

PubMed

Thomas, David L; Berger, Yves M; McKusick, Brett C; Mikolayunas, Claire M

2014-01-01

Commercial milking of sheep is a new agricultural industry in the United States starting approximately 30 yr ago. The industry is still small, but it is growing. The majority of the sheep milk is used in the production of specialty cheeses. The United States is the major importer of sheep milk cheeses with 50 to 60% of annual world exports coming to the United States during the past 20 yr. Therefore, there is considerable growth potential for the industry in the United States. The only dairy sheep research flock in North America is located at the Spooner Agricultural Research Station of the University of Wisconsin-Madison. The research program started in 1993 and has been multifaceted; dealing with several areas important to commercial dairy sheep farmers. The East Friesian and Lacaune dairy breeds were compared and introduced to the industry through the research program. Both dairy breeds produced significantly more milk than traditional meat-wool breeds found in the U.S., but the two breeds differed in their production traits. East Friesian-cross ewes produced more lambs and slightly more milk than Lacaune-cross ewes whereas Lacaune-cross ewes produced milk with a higher percentage of fat and protein than East Friesian-cross ewes. Lactation physiology studies have shown that ewes with active corpora lutea have increased milk yields, oxytocin release during milking is required to obtain normal fat percentages in the milk, large udder cisterns of dairy ewes can allow for increased milking intervals, and short daylengths during late pregnancy results in increased milk yield. In the nutrition area, legume-grass pastures and forages with a higher percentage of legume will result in increased milk production. Grazing ewes respond to additional supplementation with increased milk yield, but it is important to match the supplement to the quality of the grazing. Ewes on high quality legume-grass pastures that are high in rumen degradable protein respond with increased milk production to supplements high in energy and/or high in rumen undegraded protein.

Association between quality of cheap and unrecorded alcohol products and public health consequences in Poland.

PubMed

Lachenmeier, Dirk W; Ganss, Sebastian; Rychlak, Bogumil; Rehm, Jürgen; Sulkowska, Urszula; Skiba, Michał; Zatonski, Witold

2009-10-01

The research aimed to study the quality of cheap alcohol products in Poland. These included unrecorded alcohols (i.e., home-produced or illegally imported), estimated to constitute more than 25% of total consumption and fruit wines. A sample of alcohol products (n = 52) was collected from local markets and chemical analyses were conducted. The parameters studied were alcoholic strength, volatiles (methanol, acetaldehyde, and higher alcohols), ethyl carbamate, inorganic elements, and food additives including preservatives, colors, and sweeteners. The compositions of the beverages were then toxicologically evaluated using international standards. With the exception of 1 fortified wine, the unrecorded alcohols were home-produced fruit-derived spirits (moonshine) and spirits imported from other countries. We did not detect any nonbeverage surrogate alcohol. The unrecorded spirits contained, on average, 45% vol of alcohol. However, some products with considerably higher alcoholic strengths were found (up to 85% vol) with no labeling of the content on the bottles. These products may cause more pronounced detrimental health effects (e.g., liver cirrhosis, injuries, some forms of malignant neoplasms, alcohol use disorders, and cardiovascular disease) than will commercial beverages, especially as the consumer may be unaware of the alcohol content consumed. Fruit wines containing between 9.5 and 12.2% vol alcohol showed problems in terms of their additive content and their labeling (e.g., sulfites, sorbic acid, saccharin, and artificial colors) and should be subjected to stricter control. Regarding the other components investigated, the suspected human carcinogens, acetaldehyde and ethyl carbamate, were found at levels relevant to public health concerns. While acetaldehyde is a typical constituent of fermented beverages, ethyl carbamate was found only in home-produced unrecorded alcohols derived from stone fruits with levels significantly above international guidelines. The contamination of unrecorded alcohols with ethyl carbamate should be analyzed in a larger sample that also should include legal alcoholic beverages. Furthermore, the impacts of unrecorded alcohol on the health of people with lower socioeconomic status should be studied in detail. Overall, given the extent of the alcohol-attributable disease burden in Poland, the highest priority should be given to the problem of ethanol and its very high content in unrecorded alcohol products.

Some Considerations on the Dynamics of Nanometric Suspensions in Fluid Media

NASA Astrophysics Data System (ADS)

Lungu, Mihai; Neculae, Adrian; Bunoiu, Madalin

2009-05-01

Nano-sized particles received considerable interest in the last decade. The manipulation of nanoparticles is becoming an important issue as they are more and more produced as a result of material synthesis and combustion emission. The nanometric particles represent a very important threat for human health because they can readily enter the human body through inhalation and their toxicity is relatively high due to the large specific surface area. The separation of the nano-sized particles into distinct bands, spatially separated one of each other had also brought recently considerable attention in many scientific areas; the usages of nanoparticles are very promising for the new technologies. The behavior of a suspension of sub-micronic particles under the action of dielectrophoretic force is numerically investigated and a theoretical model is proposed.

Accounting for Structure and Agency in "Close-Up" Research on Teaching, Learning and Assessment in Higher Education

ERIC Educational Resources Information Center

Ashwin, Paul

2008-01-01

This paper examines research into teaching, learning and assessment (TLA) in higher education in terms of structure and agency. It argues that although issues of structure and agency are seen as crucial in social theory, they are very little discussed in research into TLA in higher education and that a consideration of structure and agency raises…

Global Connections to Global Partnerships: Navigating the Changing Landscape of Internationalism and Cross-Border Higher Education

ERIC Educational Resources Information Center

Olcott, Don, Jr.

2009-01-01

The purpose of this article is to provide continuing higher education leaders with a comprehensive overview of the major considerations for doing business in the global market. Included is an analysis of the driving forces in global higher education and current trends in cross-border programs and a brief review of activities that may be part of a…

The Recruitment Agent in Internationalized Higher Education: Commercial Broker and Cultural Mediator

ERIC Educational Resources Information Center

Robinson-Pant, Anna; Magyar, Anna

2018-01-01

The internationalization and marketization of higher education has resulted in U.K. universities' increasing reliance on recruitment agents to boost international student numbers. This places agents and agencies in a position of considerable influence with regard to the educational choices that students make. These institutional and individual…

Bringing It All Together: Introducing the HEAR

ERIC Educational Resources Information Center

Universities UK, 2012

2012-01-01

This report seeks official endorsement from Universities UK and GuildHE for the Higher Education Achievement Report (HEAR) to be adopted sector-wide for students entering higher education in academic year 2012-13. Following extensive trialling and detailed consideration, the report clearly outlines the HEAR and the additional information it…

Redefining Academic Identity in an Evolving Higher Education Landscape

ERIC Educational Resources Information Center

Flecknoe, Sharon J.; Choate, Julia K.; Davis, Elizabeth A.; Hodgson, Yvonne M.; Johanesen, Priscilla A.; Macaulay, Janet O.; Murphy, Kim; Sturrock, Wayne J.; Rayner, Gerry M.

2017-01-01

During a period of massive upheaval to the higher education sector, the traditional academic role has undergone considerable change. One element of these changes has been the broad introduction of Education-Focused (EF) or equivalent academic positions, which focus on educational excellence, with a requirement for high quality teaching and…

An Analysis of Costs in Institutions of Higher Education in England

ERIC Educational Resources Information Center

Johnes, Geraint; Johnes, Jill; Thanassoulis, Emmanuel

2008-01-01

Cost functions are estimated, using random effects and stochastic frontier methods, for English higher education institutions. The article advances on existing literature by employing finer disaggregation by subject, institution type and location, and by introducing consideration of quality effects. Estimates are provided of average incremental…

Care in Academia: An Exploration of Student Parents' Experiences

ERIC Educational Resources Information Center

Moreau, Marie-Pierre; Kerner, Charlotte

2015-01-01

While student parents now represent a significant proportion of the higher education population in England, this group has been given limited consideration in policy circles. Using a social constructivist and feminist theoretical framework, this paper draws on a research project investigating the role of higher education policies in supporting…

Constraining higher derivative supergravity with scattering amplitudes

DOE PAGES

Wang, Yifan; Yin, Xi

2015-08-31

We study supersymmetry constraints on higher derivative deformations of type IIB supergravity by consideration of superamplitudes. Thus, combining constraints of on-shell supervertices and basic results from string perturbation theory, we give a simple argument for the non-renormalization theorem of Green and Sethi, and some of its generalizations.

What Ever Happened to the Faculty? Drift and Decision in Higher Education

ERIC Educational Resources Information Center

Burgan, Mary

2009-01-01

In this provocative work, Mary Burgan surveys the deterioration of faculty influence in higher education. From campus planning, curriculum, and instructional technology to governance, pedagogy, and academic freedom, she urges far greater consideration for the perspective of the faculty. Burgan evokes the pervasive atmosphere of charge and…

Strategic Renewal and Development Implications of Organisational Effectiveness Research in Higher Education in Australia.

ERIC Educational Resources Information Center

Lysons, Art

1999-01-01

Suggests that organizational effectiveness research has made considerable progress in empirically deriving a systematic framework of theoretical and practical utility in Australian higher education. Offers a taxonomy based on the competing values framework and discusses use of inter-organizational comparisons and profiles for diagnosis in…

The University as an Entrepreneurial Organization

ERIC Educational Resources Information Center

Grudzinskii, A.O.

2005-01-01

In the past ten years, the organizationally homogeneous Soviet system of higher education has been transformed into a heterogeneous set of educational structures. The institutional autonomy of educational institutions carrying out programs of higher education allows them considerable freedom in the choice of the means by which they provide for…

Understanding the Gender and Ethnicity Attainment Gap in UK Higher Education

ERIC Educational Resources Information Center

Cotton, D. R. E.; Joyner, M.; George, R.; Cotton, P. A.

2016-01-01

In recent years, the success rates of different groups of students in higher education have come under considerable scrutiny, with gender and ethnicity identified as key attributes predicting differential achievement of "good degrees". A review of previous studies highlights the need for research which looks beyond "the deficit…

Practical Considerations when Using Benchmarking for Accountability in Higher Education

ERIC Educational Resources Information Center

Achtemeier, Sue D.; Simpson, Ronald D.

2005-01-01

The qualitative study on which this article is based examined key individuals' perceptions, both within a research university community and beyond in its external governing board, of how to improve benchmarking as an accountability method in higher education. Differing understanding of benchmarking revealed practical implications for using it as…

Theorising Simulation in Higher Education: Difficulty for Learners as an Emergent Phenomenon

ERIC Educational Resources Information Center

Abrandt Dahlgren, Madeleine; Fenwick, Tara; Hopwood, Nick

2016-01-01

Despite the widespread interest in using and researching simulation in higher education, little discussion has yet to address a key pedagogical concern: difficulty. A "sociomaterial" view of learning, explained in this paper, goes beyond cognitive considerations to highlight dimensions of material, situational, representational and…

Sighting Horizons of Teaching in Higher Education

ERIC Educational Resources Information Center

Barnett, Ronald; Guzmán-Valenzuela, Carolina

2017-01-01

This conceptual paper tackles the matter of teaching in higher education and proposes a concept of "horizons of teaching." It firstly offers an overview of the considerable empirical literature around teaching--especially conceptions of teaching, approaches to teaching and teaching practices--and goes on to pose some philosophical and…

Earning and Learning

ERIC Educational Resources Information Center

Haughton, Lesley

2010-01-01

The higher education landscape has changed considerably in the past decade, with the introduction of a range of flexible work-related opportunities to allow working people to study and progress at higher levels. This includes the development of modes of delivery such as distance and e-learning options, but also new ways of working between…

The Higher Education of Women: Essays in Honor of Rosemary Park.

ERIC Educational Resources Information Center

Astin, Helen S.; Hirsch, Werner Z.

Essays include: some considerations on the higher education of women (Rosemary Park); three women, creators of change (Esther Raushenbush); women's education, the case for the single-sex college (Susan Romer Kaplan); liberal arts education and women's development (C. Robert Pace); women's studies, its origin, organization, and prospects (Sheila…

Supporting Student Veterans in Transition

ERIC Educational Resources Information Center

Rumann, Corey B.; Hamrick, Florence A.

2009-01-01

The purpose of this chapter is to offer frameworks and considerations for student affairs professionals seeking to serve the transition needs of the current generation of student veterans. The historical intersections of the military and higher education, particularly with respect to the effects of the draft on students and higher education,…

Viewpoint of Undergraduate Engineering Students on Plagiarism

ERIC Educational Resources Information Center

Starovoytova, Diana; Namango, Saul Sitati

2016-01-01

Undoubtedly, plagiarism has been a global concern, especially so, in institutions of higher learning. Furthermore, over the past decades, cases of student plagiarism, in higher education, have increased, substantially. This issue cannot be taken, without due consideration, and it is crucial for educators, and universities, at large, to find the…

Motivating Game-Based Learning Efforts in Higher Education

ERIC Educational Resources Information Center

Moylan, Gina; Burgess, Ann W.; Figley, Charles; Bernstein, Michael

2015-01-01

Though there is considerable research to support using Game-Based Learning (GBL) in higher education, its implementation is lagging behind K-12 education by an order of magnitude. By considering the current state of GBL from leadership, primary consumer, academic and technical perspectives, the authors frame the main issues involved with…

From Silicon Valley to Phoenix Industries

ERIC Educational Resources Information Center

Puukka, Jaana

2009-01-01

As university leaders have long argued, the contribution of higher education to national and regional economies is considerable. Although the importance of universities in their local economies is not usually contested, much more should and could be done to take full advantage of higher education in regional and city development. Why have the…

Higher Education and Older People: Some Theoretical Considerations, Part II.

ERIC Educational Resources Information Center

Covey, Herbert C.

1983-01-01

Describes disengagement, activity, lifespan, subcultural, and continuity theories of social gerontology in light of participation in higher education by older students. Argues that continuity theory holds the most promise in accounting for older students. Emphasizes the need to stress the positive roles of old age. (JAC)

Availability, quality and price of produce in low-income neighbourhood food stores in California raise equity issues.

PubMed

Gosliner, Wendi; Brown, Daniel M; Sun, Betty C; Woodward-Lopez, Gail; Crawford, Patricia B

2018-06-01

To assess produce availability, quality and price in a large sample of food stores in low-income neighbourhoods in California. Cross-sectional statewide survey. Between 2011 and 2015, local health departments assessed store type, WIC (Supplemental Nutrition Program for Women, Infants, and Children)/SNAP (Supplemental Nutrition Assistance Program) participation, produce availability, quality and price of selected items in stores in low-income neighbourhoods. Secondary data provided reference chain supermarket produce prices matched by county and month. t Tests and ANOVA examined differences by store type; regression models examined factors associated with price. Large grocery stores (n 231), small markets (n 621) and convenience stores (n 622) in 225 neighbourhoods. Produce in most large groceries was rated high quality (97 % of fruits, 98 % of vegetables), but not in convenience stores (25 % fruits, 14 % vegetables). Small markets and convenience stores participating in WIC and/or SNAP had better produce availability, variety and quality than non-participating stores. Produce prices across store types were, on average, higher than reference prices from matched chain supermarkets (27 % higher in large groceries, 37 % higher in small markets, 102 % higher in convenience stores). Price was significantly inversely associated with produce variety, adjusting for quality, store type, and SNAP and WIC participation. The study finds that fresh produce is more expensive in low-income neighbourhoods and that convenience stores offer more expensive, poorer-quality produce than other stores. Variety is associated with price and most limited in convenience stores, suggesting more work is needed to determine how convenience stores can provide low-income consumers with access to affordable, high-quality produce. WIC and SNAP can contribute to the solution.

Macronutrient Composition and Food Form Affect Glucose and Insulin Responses in Humans

PubMed Central

Shafaeizadeh, Shila; Muhardi, Leilani; van de Heijning, Bert J. M.; van der Beek, Eline M.

2018-01-01

Glycaemic index (GI) is used as an indicator to guide consumers in making healthier food choices. We compared the GI, insulin index (II), and the area under the curve for blood glucose and insulin as glucose (GR) and insulin responses (IR) of a newly developed liquid nutritional formula with one commercially available liquid product with different types of carbohydrates. We then evaluated the glucose and insulin responses of two test foods with comparable energy density and protein percentage but presented in different food forms (liquid vs. solid). Fourteen healthy women participated in the study. GI, II, GR, and IR were assessed after (independent) consumption of two liquid products and a solid breakfast meal. The two liquid foods showed comparable GI, whilst the liquid form appeared to produce lower median GI (25 vs. 54), and II (52 vs. 98) values compared to the solid breakfast (p < 0.02). The median GR and IR for solid breakfast were respectively 44% and 45% higher compared to the liquid product (p < 0.02). Liquid formulas with different carbohydrate qualities produced comparable glucose responses, while foods with comparable energy density and protein percentage but different food form elicited differential effects on GI, II, GR, and IR. Nutrient quality and food form need to be taken into consideration when developing low GI products to manage glycaemic responses. PMID:29419785

Nutritional composition and vitamin C stability in stored camu-camu (Myrciaria dubia) pulp.

PubMed

Justi, K C; Visentainer, J V; Evelázio de Souza, N; Matsushita, M

2000-12-01

Camu-camu (Myrciaria dubia), a native fruit of the Amazon region, is one of the richest sources of vitamin C (2.4 to 3.0 g/100 g in the pulp) found in Brazil. The purpose of this work was the physical-chemical characterization of some nutrients and the valuation of vitamin C stability in stored camu-camu pulp, produced by the Agronomic Institute of Paraná (IAPAR), Paraná State, Brazil. The vitamin C determination was made by titration with potassium iodate. The fruit produced in Paraná State, presented a lower content of vitamin C than the one native of the amazon region, possibly due to the different development conditions of the plant, and consequently of the fruit, as well as the climatic variation, the humidity and the characteristics of the soil. Regarding the vitamin C stability in stored (-18 degrees C) camu-camu pulp, a considerable decrease in its concentration until the 28th day was observed lost 23% (from 1.57 to 1.21 g/100 g), staying approximately the same until the end of the experiment. After 335 days of storage, the content found was of approximately 1.16 g/100 g of pulp, the ascorbic acid losses amounted to 26%. This content was still higher than the one found for most fruits that are good sources of this vitamin.

Studies on some edible wild mushrooms from Nigeria: 1. Nutritional, teratogenic and toxic considerations.

PubMed

Adewusi, S R; Alofe, F V; Odeyemi, O; Afolabi, O A; Oke, O L

1993-03-01

The biological value of 5 mushrooms Chlorophyllum molybditis, Psathyrella atroumbonata, Termitomyces robustus, Termitomyces striatus and Volvariella esculenta from our collection of wild edible mushrooms were determined using weanling rats. C. molybditis supported rapid growth with PER (2.63) higher than the casein control (2.50). P. atroumbonata was average in biological performance (PER 1.50) while T. robustus and V. esculenta did not support growth at all. Rats on T. striatus dried at 60 degrees C for 48 h lost weight rapidly and showed pathological signs of toxicity by the second day. All rats on this diet died by the fourth day of the experiment. When the diet of T. striatus dried at 90 degrees C for about 8 h was fed, the rats gained weight marginally but all survived. Prolonged storage of T. striatus at 60 degrees C for 5-8 weeks also seemed to detoxify the poisonous component such that PER and NPR values were 0.8 and 2.0 respectively. 2 pairs each of adult rats fed C. molybditis and Tricholoma lobayensis diets for 10 days were mated. Rats of C. molybditis diet gave 5 and 6 litters each and only one of these litters seemed to have retarded growth. Rats on T. lobayensis diet did not produce any litters for 14 weeks but the female produced off-spring when mated with control male rats.

Novel image cytometric method for detection of physiological and metabolic changes in Saccharomyces cerevisiae.

PubMed

Chan, Leo L; Kury, Alexandria; Wilkinson, Alisha; Berkes, Charlotte; Pirani, Alnoor

2012-11-01

The studying and monitoring of physiological and metabolic changes in Saccharomyces cerevisiae (S. cerevisiae) has been a key research area for the brewing, baking, and biofuels industries, which rely on these economically important yeasts to produce their products. Specifically for breweries, physiological and metabolic parameters such as viability, vitality, glycogen, neutral lipid, and trehalose content can be measured to better understand the status of S. cerevisiae during fermentation. Traditionally, these physiological and metabolic changes can be qualitatively observed using fluorescence microscopy or flow cytometry for quantitative fluorescence analysis of fluorescently labeled cellular components associated with each parameter. However, both methods pose known challenges to the end-users. Specifically, conventional fluorescent microscopes lack automation and fluorescence analysis capabilities to quantitatively analyze large numbers of cells. Although flow cytometry is suitable for quantitative analysis of tens of thousands of fluorescently labeled cells, the instruments require a considerable amount of maintenance, highly trained technicians, and the system is relatively expensive to both purchase and maintain. In this work, we demonstrate the first use of Cellometer Vision for the kinetic detection and analysis of vitality, glycogen, neutral lipid, and trehalose content of S. cerevisiae. This method provides an important research tool for large and small breweries to study and monitor these physiological behaviors during production, which can improve fermentation conditions to produce consistent and higher-quality products.

Aircraft-type dependency of contrail evolution

NASA Astrophysics Data System (ADS)

Unterstrasser, S.; Görsch, N.

2014-12-01

The impact of aircraft type on contrail evolution is assessed using a large eddy simulation model with Lagrangian ice microphysics. Six different aircraft ranging from the small regional airliner Bombardier CRJ to the largest aircraft Airbus A380 are taken into account. Differences in wake vortex properties and fuel flow lead to considerable variations in the early contrail geometric depth and ice crystal number. Larger aircraft produce contrails with more ice crystals (assuming that the number of initially generated ice crystals per kilogram fuel is constant). These initial differences are reduced in the first minutes, as the ice crystal loss during the vortex phase is stronger for larger aircraft. In supersaturated air, contrails of large aircraft are much deeper after 5 min than those of small aircraft. A parameterization for the final vertical displacement of the wake vortex system is provided, depending only on the initial vortex circulation and stratification. Cloud resolving simulations are used to examine whether the aircraft-induced initial differences have a long-lasting mark. These simulations suggest that the synoptic scenario controls the contrail cirrus evolution qualitatively. However, quantitative differences between the contrail cirrus properties of the various aircraft remain over the total simulation period of 6 h. The total extinctions of A380-produced contrails are about 1.5 to 2.5 times higher than those from contrails of a Bombardier CRJ.

Hole expansion test of third generation steels

NASA Astrophysics Data System (ADS)

Agirre, Julen; Mendiguren, Joseba; Galdos, Lander; de Argandoña, Eneko Sáenz

2017-10-01

The trend towards the implementation of new materials in the chassis of the automobiles is considerably making more complex the manufacturing of the components that built it up. In this scenario materials with higher strengths and lower formabilities are daily faced by tool makers and component producers what reduces the process windows and makes the forming processes to be in the limits of the materials. One of the concerns that tool makers must face during the definition of the tools is the expansion ratios that the holes in the sheet may reach before producing a breakage due to the stretching of the material (also known as edge cracks). For the characterization of such limits, a standard test, the hole expansion test, can be applied so that the limits of the material are known. At the present study, hole expansion tests of a third generation steel, Fortiform1050 with a thickness of 1.2 millimeters have been carried out and compared them to a mild steel, DX54D with a thickness of 0.6 millimeters. A comparison for each material in terms of technology used to punch the hole, mechanical punching vs laser cutting has also been conducted. In addition, the measurement technique (online measurement vs offline measurement) followed in the Hole Expansion Ratio (HER) identification has also been analyzed. Finally, differences between both materials and techniques are presented.

Non-Edible Plant Oils as New Sources for Biodiesel Production

PubMed Central

Chhetri, Arjun B.; Tango, Martin S.; Budge, Suzanne M.; Watts, K. Chris; Islam, M. Rafiqul

2008-01-01

Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. However, as the biodiesel is produced from vegetable oils and animal fats, there are concerns that biodiesel feedstock may compete with food supply in the long-term. Hence, the recent focus is to find oil bearing plants that produce non-edible oils as the feedstock for biodiesel production. In this paper, two plant species, soapnut (Sapindus mukorossi) and jatropha (jatropha curcas, L.) are discussed as newer sources of oil for biodiesel production. Experimental analysis showed that both oils have great potential to be used as feedstock for biodiesel production. Fatty acid methyl ester (FAME) from cold pressed soapnut seed oil was envisaged as biodiesel source for the first time. Soapnut oil was found to have average of 9.1% free FA, 84.43% triglycerides, 4.88% sterol and 1.59% others. Jatropha oil contains approximately 14% free FA, approximately 5% higher than soapnut oil. Soapnut oil biodiesel contains approximately 85% unsaturated FA while jatropha oil biodiesel was found to have approximately 80% unsaturated FA. Oleic acid was found to be the dominant FA in both soapnut and jatropha biodiesel. Over 97% conversion to FAME was achieved for both soapnut and jatropha oil. PMID:19325741

Validity of histopathological grading of articular cartilage from osteoarthritic knee joints

PubMed Central

Ostergaard, K.; Andersen, C.; Petersen, J.; Bendtzen, K.; Salter, D.

1999-01-01

OBJECTIVES—To determine the validity of the histological-histochemical grading system (HHGS) for osteoarthritic (OA) articular cartilage.
METHODS—Human articular cartilage was obtained from macroscopically normal (n = 13) and OA (n = 21) knee joints. Sections of central and peripheral regions of normal samples were produced. Sections of regions containing severe, moderate, and mild OA changes were produced from each OA sample. A total of 89 sections were graded by means of the HHGS (0-14) twice by three observers.
RESULTS—Average scores for regions designated severe (8.64) and moderate (5.83) OA were less than the expected (10-14 and 6-9, respectively) according to the HHGS, whereas average scores for the region designated mild (5.29) OA and central and peripheral regions (2.19) of normal cartilage were higher than expected (2-5 and 0-1, respectively). The HHGS was capable of differentiating between articular cartilage from macroscopically normal and OA joints and between the region designated severe OA and other regions. However, the HHGS did not adequately differentiate between regions designated mild and moderate OA. Values for sensitivity, specificity, and efficiency for all regions varied considerably.
CONCLUSION—The HHGS is valid for normal and severe OA cartilage, but does not permit distinction between mild and moderate OA changes in articular cartilage.

 Keywords: histopathology; osteoarthritis; reliability; validity PMID:10364898

Small interfering RNA-producing loci in the ancient parasitic eukaryote Trypanosoma brucei

PubMed Central

2012-01-01

Background At the core of the RNA interference (RNAi) pathway in Trypanosoma brucei is a single Argonaute protein, TbAGO1, with an established role in controlling retroposon and repeat transcripts. Recent evidence from higher eukaryotes suggests that a variety of genomic sequences with the potential to produce double-stranded RNA are sources for small interfering RNAs (siRNAs). Results To test whether such endogenous siRNAs are present in T. brucei and to probe the individual role of the two Dicer-like enzymes, we affinity purified TbAGO1 from wild-type procyclic trypanosomes, as well as from cells deficient in the cytoplasmic (TbDCL1) or nuclear (TbDCL2) Dicer, and subjected the bound RNAs to Illumina high-throughput sequencing. In wild-type cells the majority of reads originated from two classes of retroposons. We also considerably expanded the repertoire of trypanosome siRNAs to encompass a family of 147-bp satellite-like repeats, many of the regions where RNA polymerase II transcription converges, large inverted repeats and two pseudogenes. Production of these newly described siRNAs is strictly dependent on the nuclear DCL2. Notably, our data indicate that putative centromeric regions, excluding the CIR147 repeats, are not a significant source for endogenous siRNAs. Conclusions Our data suggest that endogenous RNAi targets may be as evolutionarily old as the mechanism itself. PMID:22925482

Subspecies diversity in bacteriocin production by intestinal Lactobacillus salivarius strains

PubMed Central

O’ Shea, Eileen F.; O’ Connor, Paula M.; Raftis, Emma J.; O’ Toole, Paul W.; Stanton, Catherine; Cotter, Paul D.; Ross, R. Paul; Hill, Colin

2012-01-01

A recent comparative genomic hybridization study in our laboratory revealed considerable plasticity within the bacteriocin locus of gastrointestinal strains of Lactobacillus salivarius. Most notably, these analyses led to the identification of two novel unmodified bacteriocins, salivaricin L and salivaricin T, produced by the neonatal isolate L. salivarius DPC6488 with immunity, regulatory and export systems analogous to those of abp118, a two-component bacteriocin produced by the well characterized reference strain L. salivarius UCC118. In this addendum we discuss the intraspecific diversity of our seven bacteriocin-producing L. salivarius isolates on a genome-wide level, and more specifically, with respect to their salivaricin loci. PMID:22892690

Use of Transgenic Animals in Biotechnology: Prospects and Problems

PubMed Central

Maksimenko, O. G.; Deykin, A.V.; Khodarovich, Yu. M.; Georgiev, P. G.

2013-01-01

During the past two decades, there have been numerous attempts at using animals in order to produce recombinant human proteins and monoclonal antibodies. However, it is only recently that the first two therapeutic agents isolated from the milk of transgenic animals, C1 inhibitor (Ruconest) and antithrombin (ATryn), appeared on the market. This inspires hope that a considerable number of new recombinant proteins created using such technology could become available for practical use in the near future. In this review, the methods applied to produce transgenic animals are described and the advantages and drawbacks related to their use for producing recombinant human proteins and monoclonal antibodies are discussed. PMID:23556129

Subspecies diversity in bacteriocin production by intestinal Lactobacillus salivarius strains.

PubMed

O' Shea, Eileen F; O' Connor, Paula M; Raftis, Emma J; O' Toole, Paul W; Stanton, Catherine; Cotter, Paul D; Ross, R Paul; Hill, Colin

2012-01-01

A recent comparative genomic hybridization study in our laboratory revealed considerable plasticity within the bacteriocin locus of gastrointestinal strains of Lactobacillus salivarius. Most notably, these analyses led to the identification of two novel unmodified bacteriocins, salivaricin L and salivaricin T, produced by the neonatal isolate L. salivarius DPC6488 with immunity, regulatory and export systems analogous to those of abp118, a two-component bacteriocin produced by the well characterized reference strain L. salivarius UCC118. In this addendum we discuss the intraspecific diversity of our seven bacteriocin-producing L. salivarius isolates on a genome-wide level, and more specifically, with respect to their salivaricin loci.

Shielding synchrotron light sources: Advantages of circular shield walls tunnels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, S. L.; Ghosh, V. J.; Breitfeller, M.

Third generation high brightness light sources are designed to have low emittance and high current beams, which contribute to higher beam loss rates that will be compensated by Top-Off injection. Shielding for these higher loss rates will be critical to protect the projected higher occupancy factors for the users. Top-Off injection requires a full energy injector, which will demand greater consideration of the potential abnormal beam miss-steering and localized losses that could occur. The high energy electron injection beam produce significantly higher neutron component dose to the experimental floor than lower energy injection and ramped operations. High energy neutrons producedmore » in the forward direction from thin target beam losses are a major component of the dose rate outside the shield walls of the tunnel. The convention has been to provide thicker 90° ratchet walls to reduce this dose to the beam line users. We present an alternate circular shield wall design, which naturally and cost effectively increases the path length for this forward radiation in the shield wall and thereby substantially decreasing the dose rate for these beam losses. Here, this shield wall design will greatly reduce the dose rate to the users working near the front end optical components but will challenge the beam line designers to effectively utilize the longer length of beam line penetration in the shield wall. Additional advantages of the circular shield wall tunnel are that it's simpler to construct, allows greater access to the insertion devices and the upstream in tunnel beam line components, as well as reducing the volume of concrete and therefore the cost of the shield wall.« less

Shielding synchrotron light sources: Advantages of circular shield walls tunnels

DOE PAGES

Kramer, S. L.; Ghosh, V. J.; Breitfeller, M.

2016-04-26

Third generation high brightness light sources are designed to have low emittance and high current beams, which contribute to higher beam loss rates that will be compensated by Top-Off injection. Shielding for these higher loss rates will be critical to protect the projected higher occupancy factors for the users. Top-Off injection requires a full energy injector, which will demand greater consideration of the potential abnormal beam miss-steering and localized losses that could occur. The high energy electron injection beam produce significantly higher neutron component dose to the experimental floor than lower energy injection and ramped operations. High energy neutrons producedmore » in the forward direction from thin target beam losses are a major component of the dose rate outside the shield walls of the tunnel. The convention has been to provide thicker 90° ratchet walls to reduce this dose to the beam line users. We present an alternate circular shield wall design, which naturally and cost effectively increases the path length for this forward radiation in the shield wall and thereby substantially decreasing the dose rate for these beam losses. Here, this shield wall design will greatly reduce the dose rate to the users working near the front end optical components but will challenge the beam line designers to effectively utilize the longer length of beam line penetration in the shield wall. Additional advantages of the circular shield wall tunnel are that it's simpler to construct, allows greater access to the insertion devices and the upstream in tunnel beam line components, as well as reducing the volume of concrete and therefore the cost of the shield wall.« less

Urban-Rural Disparity of Breast Cancer and Socioeconomic Risk Factors in China

PubMed Central

Fei, Xufeng; Wu, Jiaping; Kong, Zhe; Christakos, George

2015-01-01

Breast cancer is one of the most commonly diagnosed cancers worldwide. The primary aim of this work is the study of breast cancer disparity among Chinese women in urban vs. rural regions and its associations with socioeconomic factors. Data on breast cancer incidence were obtained from the Chinese cancer registry annual report (2005–2009). The ten socioeconomic factors considered in this study were obtained from the national population 2000 census and the Chinese city/county statistical yearbooks. Student’s T test was used to assess disparities of female breast cancer and socioeconomic factors in urban vs. rural regions. Pearson correlation and ordinary least squares (OLS) models were employed to analyze the relationships between socioeconomic factors and cancer incidence. It was found that the breast cancer incidence was significantly higher in urban than in rural regions. Moreover, in urban regions, breast cancer incidence remained relatively stable, whereas in rural regions it displayed an annual percentage change (APC) of 8.55. Among the various socioeconomic factors considered, breast cancer incidence exhibited higher positive correlations with population density, percentage of non-agriculture population, and second industry output. On the other hand, the incidence was negatively correlated with the percentage of population employed in primary industry. Overall, it was observed that higher socioeconomic status would lead to a higher breast cancer incidence in China. When studying breast cancer etiology, special attention should be paid to environmental pollutants, especially endocrine disruptors produced during industrial activities. Lastly, the present work’s findings strongly recommend giving high priority to the development of a systematic nationwide breast cancer screening program for women in China; with sufficient participation, mammography screening can considerably reduce mortality among women. PMID:25688556

Urban-rural disparity of breast cancer and socioeconomic risk factors in China.

PubMed

Fei, Xufeng; Wu, Jiaping; Kong, Zhe; Christakos, George

2015-01-01

Breast cancer is one of the most commonly diagnosed cancers worldwide. The primary aim of this work is the study of breast cancer disparity among Chinese women in urban vs. rural regions and its associations with socioeconomic factors. Data on breast cancer incidence were obtained from the Chinese cancer registry annual report (2005-2009). The ten socioeconomic factors considered in this study were obtained from the national population 2000 census and the Chinese city/county statistical yearbooks. Student's T test was used to assess disparities of female breast cancer and socioeconomic factors in urban vs. rural regions. Pearson correlation and ordinary least squares (OLS) models were employed to analyze the relationships between socioeconomic factors and cancer incidence. It was found that the breast cancer incidence was significantly higher in urban than in rural regions. Moreover, in urban regions, breast cancer incidence remained relatively stable, whereas in rural regions it displayed an annual percentage change (APC) of 8.55. Among the various socioeconomic factors considered, breast cancer incidence exhibited higher positive correlations with population density, percentage of non-agriculture population, and second industry output. On the other hand, the incidence was negatively correlated with the percentage of population employed in primary industry. Overall, it was observed that higher socioeconomic status would lead to a higher breast cancer incidence in China. When studying breast cancer etiology, special attention should be paid to environmental pollutants, especially endocrine disruptors produced during industrial activities. Lastly, the present work's findings strongly recommend giving high priority to the development of a systematic nationwide breast cancer screening program for women in China; with sufficient participation, mammography screening can considerably reduce mortality among women.

Missing energies at pair creation

NASA Technical Reports Server (NTRS)

El-Ela, A. A.; Hassan, S.; Bagge, E. R.

1985-01-01

Wilson cloud chamber measurements of the separated spectra of positrons and electrons produced by gamma quanta of 6.14 MeV differ considerably from the theoretically predicted spectra by BETHE and HEITLER, but are in good agreement with those of a modified theory of pair creation.

Mechanized Polishing of Optical Rod and Fiber Ends

NASA Technical Reports Server (NTRS)

Gum, J. S.

1987-01-01

Workpiece holder for standard grinding and polishing machine makes it easier to produce optical finish and shape on end of metal or glass rod or bundle of optical fibers. Previously, glass parts lapped and polished manually, time-consuming procedure calling for considerable skill.

How to build an antimatter rocket for interstellar missions - systems level considerations in designing advanced propulsion technology vehicles

NASA Technical Reports Server (NTRS)

Frisbee, Robert H.

2003-01-01

This paper discusses the general mission requirements and system technologies that would be required to implement an antimatter propulsion system where a magnetic nozzle is used to direct charged particles to produce thrust.

36 CFR 327.10 - Fires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Fires. (a) Gasoline and other fuels, except that which is contained in storage tanks of vehicles... completely extinguished prior to departure. The burning of materials that produce toxic fumes, including, but.... The District Commander may prohibit open burning of any type for environmental considerations. (c...

19 CFR 351.409 - Differences in quantities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING... the line of trade and market under consideration, the exporter or producer demonstrates that it has adhered to its price list. (e) Relationship to level of trade adjustment. If adjustments are claimed for...

Development and Application of NUMIT for Realistic Modeling of Deep-Dielectric Spacecraft Charging in the Space Environment

DTIC Science & Technology

2014-04-21

Dixon, a graduate student at the University of New Mexico who introduced us to MCNP . Using what we learned from Dixon, we were able to produce a...curves were produced with MCNP for incident electron energies from 10 to 100 keV in increments of 10 keV, see Figure 9. In this case, the same...the algorithm. Since MCNP does take backscatter into consideration, the comparisons on the vertical scales (energy or number of electrons deposited

Small Business Innovations (Helicopters)

NASA Technical Reports Server (NTRS)

1992-01-01

The amount of engine power required for a helicopter to hover is an important, but difficult, consideration in helicopter design. The EHPIC program model produces converged, freely distorted wake geometries that generate accurate analysis of wake-induced downwash, allowing good predictions of rotor thrust and power requirements. Continuum Dynamics, Inc., the Small Business Innovation Research (SBIR) company that developed EHPIC, also produces RotorCRAFT, a program for analysis of aerodynamic loading of helicopter blades in forward flight. Both helicopter codes have been licensed to commercial manufacturers.

[Pain in the trochanteric region caused by tunnel compression of the lateral cutaneous perforating branch of the ilio-hypogastric nerve. Indications for neurolysis].

PubMed

Touzard, R C; Maigne, J Y; Maigne, R; Doursounian, L

1989-01-01

After consideration of anatomical and clinical studies, the authors describe a new tunnel syndrome involving the lateral cutaneous branch of the iliohypogastric nerve as it emerges above the iliac crest. Irritation of the strangulated nerve produces pain over the lateral aspect of the hip. In 7 cases where local infiltration failed, neurolysis was carried out and produced excellent results in 5 patients, thus confirming the pathophysiology of this syndrome.

British Society of Paediatric Dentistry: a policy document on consent and the use of physical intervention in the dental care of children.

PubMed

Nunn, June; Foster, Martin; Master, Selina; Greening, Sue

2008-11-01

This policy document was prepared by J Nunn, M Foster, S Master and S Greening on behalf of the British Society of Paediatric Dentistry (BSPD). Policy documents produced by the BSPD represent a majority view, based on a consideration of currently available evidence. They are produced to provide guidance with the intention that the policy be regularly reviewed and updated to take account of changing views and developments.

JPRS Report, Soviet Union, Political Affairs.

DTIC Science & Technology

1988-12-21

office in Kirovskiy rayon recorded the marriage of an 18-year-old girl to a 78-year-old man. Out of ethical considerations we shall not name the names...for us to produce panty hose of other sizes: 12-14 for children and 29-33 for women. This is caused by a lack of equipment. In addition, the factory...time but has still not been resolved. "Our nation does not produce the equipment at all for making cotton panty hose in the large sizes. The only

Coal conversion products industrial applications

NASA Technical Reports Server (NTRS)

Dunkin, J. H.; Warren, D.

1980-01-01

Coal-based synthetic fuels complexes under development consideration by NASA/MSFC will produce large quantities of synthetic fuels, primarily medium BTU gas, which could be sold commercially to industries located in South Central Tennessee and Northern Alabama. The complexes would be modular in construction, and subsequent modules may produce liquid fuels or fuels for electric power production. Current and projected industries in the two states which have a propensity for utilizing coal-based synthetic fuels were identified, and a data base was compiled to support MFSC activities.

Multifactor leadership styles and new exposure to workplace bullying: a six-month prospective study

PubMed Central

TSUNO, Kanami; KAWAKAMI, Norito

2014-01-01

This study investigated the prospective association between supervisor leadership styles and workplace bullying. Altogether 404 civil servants from a local government in Japan completed baseline and follow-up surveys. The leadership variables and exposure to bullying were measured by Multifactor Leadership Questionnaire and Negative Acts Questionnaire-Revised, respectively. The prevalence of workplace bullying was 14.8% at baseline and 15.1% at follow-up. Among respondents who did not experience bullying at baseline (n=216), those who worked under the supervisors as higher in passive laissez-faire leadership had a 4.3 times higher risk of new exposure to bullying. On the other hand, respondents whose supervisors with highly considerate of the individual had a 70% lower risk of new exposure to bullying. In the entire sample (n=317), passive laissez-faire leadership was significantly and positively associated, while charisma/inspiration, individual consideration, and contingent reward were negatively associated both after adjusting for demographic and occupational characteristics at baseline, life events during follow-up, and exposure to workplace bullying at baseline. Results indicated that passive laissez-faire and low individual consideration leadership style at baseline were strong predictors of new exposure to bullying and high individual consideration leadership of supervisors/managers could be a preventive factor against bullying. PMID:25382384

Multifactor leadership styles and new exposure to workplace bullying: a six-month prospective study.

PubMed

Tsuno, Kanami; Kawakami, Norito

2015-01-01

This study investigated the prospective association between supervisor leadership styles and workplace bullying. Altogether 404 civil servants from a local government in Japan completed baseline and follow-up surveys. The leadership variables and exposure to bullying were measured by Multifactor Leadership Questionnaire and Negative Acts Questionnaire-Revised, respectively. The prevalence of workplace bullying was 14.8% at baseline and 15.1% at follow-up. Among respondents who did not experience bullying at baseline (n=216), those who worked under the supervisors as higher in passive laissez-faire leadership had a 4.3 times higher risk of new exposure to bullying. On the other hand, respondents whose supervisors with highly considerate of the individual had a 70% lower risk of new exposure to bullying. In the entire sample (n=317), passive laissez-faire leadership was significantly and positively associated, while charisma/inspiration, individual consideration, and contingent reward were negatively associated both after adjusting for demographic and occupational characteristics at baseline, life events during follow-up, and exposure to workplace bullying at baseline. Results indicated that passive laissez-faire and low individual consideration leadership style at baseline were strong predictors of new exposure to bullying and high individual consideration leadership of supervisors/managers could be a preventive factor against bullying.

Modeling of unit operating considerations in generating-capacity reliability evaluation. Volume 1. Mathematical models, computing methods, and results. Final report. [GENESIS, OPCON and OPPLAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, A.D.; Ayoub, A.K.; Singh, C.

1982-07-01

Existing methods for generating capacity reliability evaluation do not explicitly recognize a number of operating considerations which may have important effects in system reliability performance. Thus, current methods may yield estimates of system reliability which differ appreciably from actual observed reliability. Further, current methods offer no means of accurately studying or evaluating alternatives which may differ in one or more operating considerations. Operating considerations which are considered to be important in generating capacity reliability evaluation include: unit duty cycles as influenced by load cycle shape, reliability performance of other units, unit commitment policy, and operating reserve policy; unit start-up failuresmore » distinct from unit running failures; unit start-up times; and unit outage postponability and the management of postponable outages. A detailed Monte Carlo simulation computer model called GENESIS and two analytical models called OPCON and OPPLAN have been developed which are capable of incorporating the effects of many operating considerations including those noted above. These computer models have been used to study a variety of actual and synthetic systems and are available from EPRI. The new models are shown to produce system reliability indices which differ appreciably from index values computed using traditional models which do not recognize operating considerations.« less

Uncertainties in selected river water quality data

NASA Astrophysics Data System (ADS)

Rode, M.; Suhr, U.

2007-02-01

Monitoring of surface waters is primarily done to detect the status and trends in water quality and to identify whether observed trends arise from natural or anthropogenic causes. Empirical quality of river water quality data is rarely certain and knowledge of their uncertainties is essential to assess the reliability of water quality models and their predictions. The objective of this paper is to assess the uncertainties in selected river water quality data, i.e. suspended sediment, nitrogen fraction, phosphorus fraction, heavy metals and biological compounds. The methodology used to structure the uncertainty is based on the empirical quality of data and the sources of uncertainty in data (van Loon et al., 2005). A literature review was carried out including additional experimental data of the Elbe river. All data of compounds associated with suspended particulate matter have considerable higher sampling uncertainties than soluble concentrations. This is due to high variability within the cross section of a given river. This variability is positively correlated with total suspended particulate matter concentrations. Sampling location has also considerable effect on the representativeness of a water sample. These sampling uncertainties are highly site specific. The estimation of uncertainty in sampling can only be achieved by taking at least a proportion of samples in duplicates. Compared to sampling uncertainties, measurement and analytical uncertainties are much lower. Instrument quality can be stated well suited for field and laboratory situations for all considered constituents. Analytical errors can contribute considerably to the overall uncertainty of river water quality data. Temporal autocorrelation of river water quality data is present but literature on general behaviour of water quality compounds is rare. For meso scale river catchments (500-3000 km2) reasonable yearly dissolved load calculations can be achieved using biweekly sample frequencies. For suspended sediments none of the methods investigated produced very reliable load estimates when weekly concentrations data were used. Uncertainties associated with loads estimates based on infrequent samples will decrease with increasing size of rivers.

Uncertainties in selected surface water quality data

NASA Astrophysics Data System (ADS)

Rode, M.; Suhr, U.

2006-09-01

Monitoring of surface waters is primarily done to detect the status and trends in water quality and to identify whether observed trends arise form natural or anthropogenic causes. Empirical quality of surface water quality data is rarely certain and knowledge of their uncertainties is essential to assess the reliability of water quality models and their predictions. The objective of this paper is to assess the uncertainties in selected surface water quality data, i.e. suspended sediment, nitrogen fraction, phosphorus fraction, heavy metals and biological compounds. The methodology used to structure the uncertainty is based on the empirical quality of data and the sources of uncertainty in data (van Loon et al., 2006). A literature review was carried out including additional experimental data of the Elbe river. All data of compounds associated with suspended particulate matter have considerable higher sampling uncertainties than soluble concentrations. This is due to high variability's within the cross section of a given river. This variability is positively correlated with total suspended particulate matter concentrations. Sampling location has also considerable effect on the representativeness of a water sample. These sampling uncertainties are highly site specific. The estimation of uncertainty in sampling can only be achieved by taking at least a proportion of samples in duplicates. Compared to sampling uncertainties measurement and analytical uncertainties are much lower. Instrument quality can be stated well suited for field and laboratory situations for all considered constituents. Analytical errors can contribute considerable to the overall uncertainty of surface water quality data. Temporal autocorrelation of surface water quality data is present but literature on general behaviour of water quality compounds is rare. For meso scale river catchments reasonable yearly dissolved load calculations can be achieved using biweekly sample frequencies. For suspended sediments none of the methods investigated produced very reliable load estimates when weekly concentrations data were used. Uncertainties associated with loads estimates based on infrequent samples will decrease with increasing size of rivers.

Environmental impacts of food consumption by dogs and cats

PubMed Central

2017-01-01

In the US, there are more than 163 million dogs and cats that consume, as a significant portion of their diet, animal products and therefore potentially constitute a considerable dietary footprint. Here, the energy and animal-derived product consumption of these pets in the US is evaluated for the first time, as are the environmental impacts from the animal products fed to them, including feces production. In the US, dogs and cats consume about 19% ± 2% of the amount of dietary energy that humans do (203 ± 15 PJ yr-1 vs. 1051 ± 9 PJ yr-1) and 33% ± 9% of the animal-derived energy (67 ± 17 PJ yr-1 vs. 206 ± 2 PJ yr-1). They produce about 30% ± 13%, by mass, as much feces as Americans (5.1 ± Tg yr-1 vs. 17.2 Tg yr-1), and through their diet, constitute about 25–30% of the environmental impacts from animal production in terms of the use of land, water, fossil fuel, phosphate, and biocides. Dog and cat animal product consumption is responsible for release of up to 64 ± 16 million tons CO2-equivalent methane and nitrous oxide, two powerful greenhouse gasses (GHGs). Americans are the largest pet owners in the world, but the tradition of pet ownership in the US has considerable costs. As pet ownership increases in some developing countries, especially China, and trends continue in pet food toward higher content and quality of meat, globally, pet ownership will compound the environmental impacts of human dietary choices. Reducing the rate of dog and cat ownership, perhaps in favor of other pets that offer similar health and emotional benefits would considerably reduce these impacts. Simultaneous industry-wide efforts to reduce overfeeding, reduce waste, and find alternative sources of protein will also reduce these impacts. PMID:28767700

Environmental impacts of food consumption by dogs and cats.

PubMed

Okin, Gregory S

2017-01-01

In the US, there are more than 163 million dogs and cats that consume, as a significant portion of their diet, animal products and therefore potentially constitute a considerable dietary footprint. Here, the energy and animal-derived product consumption of these pets in the US is evaluated for the first time, as are the environmental impacts from the animal products fed to them, including feces production. In the US, dogs and cats consume about 19% ± 2% of the amount of dietary energy that humans do (203 ± 15 PJ yr-1 vs. 1051 ± 9 PJ yr-1) and 33% ± 9% of the animal-derived energy (67 ± 17 PJ yr-1 vs. 206 ± 2 PJ yr-1). They produce about 30% ± 13%, by mass, as much feces as Americans (5.1 ± Tg yr-1 vs. 17.2 Tg yr-1), and through their diet, constitute about 25-30% of the environmental impacts from animal production in terms of the use of land, water, fossil fuel, phosphate, and biocides. Dog and cat animal product consumption is responsible for release of up to 64 ± 16 million tons CO2-equivalent methane and nitrous oxide, two powerful greenhouse gasses (GHGs). Americans are the largest pet owners in the world, but the tradition of pet ownership in the US has considerable costs. As pet ownership increases in some developing countries, especially China, and trends continue in pet food toward higher content and quality of meat, globally, pet ownership will compound the environmental impacts of human dietary choices. Reducing the rate of dog and cat ownership, perhaps in favor of other pets that offer similar health and emotional benefits would considerably reduce these impacts. Simultaneous industry-wide efforts to reduce overfeeding, reduce waste, and find alternative sources of protein will also reduce these impacts.

Higher derivative couplings in theories with sixteen supersymmetries

DOE PAGES

Lin, Ying -Hsuan; Shao, Shu -Heng; Yin, Xi; ...

2015-12-15

We give simple arguments for new non-renormalization theorems on higher derivative couplings of gauge theories to supergravity, with sixteen supersymmetries, by considerations of brane-bulk superamplitudes. This leads to some exact results on the effective coupling of D3-branes in type IIB string theory. As a result, we also derive exact results on higher dimensional operators in the torus compactification of the six dimensional (0, 2) superconformal theory.

The Preservation of Excellence in American Higher Education: The Essential Role of Private Colleges and Universities. Report of the ECS Task Force on State Policy and Independent Higher Education.

ERIC Educational Resources Information Center

Education Commission of the States, Denver, CO.

This report examines the role of private higher education in meeting public purposes, considers how state policies affect this role, and presents actual and potential trends. Also, the report warns of serious causes for concern and presents recommendations that include preventive measures deserving early consideration. Sections of the report…

Comparing personal insight gains due to consideration of a recent dream and consideration of a recent event using the Ullman and Schredl dream group methods

PubMed Central

Edwards, Christopher L.; Malinowski, Josie E.; McGee, Shauna L.; Bennett, Paul D.; Ruby, Perrine M.; Blagrove, Mark T.

2015-01-01

There have been reports and claims in the psychotherapeutic literature that the consideration of recent dreams can result in personal realizations and insight. There is theoretical support for these claims from work on rapid eye movement (REM) sleep having a function of the consolidation of emotional memories and the creative formation of connections between new and older memories. To investigate these claims, 11 participants (10 females, one male) reported and considered a recent home dream in a dream discussion group that following the “Appreciating dreams” method of Montague Ullman. The group ran 11 times, each participant attending and participating once. A further nine participants (seven females, two males) reported and considered a recent home dream in a group that followed the “Listening to the dreamer” method of Michael Schredl. The two studies each had a control condition where the participant also reported a recent event, the consideration of which followed the same technique as was followed for the dream report. Outcomes of the discussions were assessed by the participants on the Gains from Dream Interpretation (GDI) scale, and on its counterpart, the Gains from Event Interpretation scale. High ratings on the GDI experiential-insight subscale were reported for both methods, when applied to dreams, and for the Ullman method Exploration-Insight ratings for the dream condition were significantly higher than for the control event condition. In the Ullman method, self-assessment of personal insight due to consideration of dream content was also significantly higher than for the event consideration condition. The findings support the view that benefits can be obtained from the consideration of dream content, in terms of identifying the waking life sources of dream content, and because personal insight may also occur. To investigate the mechanisms for the findings, the studies should be repeated with REM and non-REM dream reports, hypothesizing greater insight from the former. PMID:26150797

Techniques for animation of CFD results. [computational fluid dynamics

NASA Technical Reports Server (NTRS)

Horowitz, Jay; Hanson, Jeffery C.

1992-01-01

Video animation is becoming increasingly vital to the computational fluid dynamics researcher, not just for presentation, but for recording and comparing dynamic visualizations that are beyond the current capabilities of even the most powerful graphic workstation. To meet these needs, Lewis Research Center has recently established a facility to provide users with easy access to advanced video animation capabilities. However, producing animation that is both visually effective and scientifically accurate involves various technological and aesthetic considerations that must be understood both by the researcher and those supporting the visualization process. These considerations include: scan conversion, color conversion, and spatial ambiguities.

Interphase layer optimization for metal matrix composites with fabrication considerations

NASA Technical Reports Server (NTRS)

Morel, M.; Saravanos, D. A.; Chamis, C. C.

1991-01-01

A methodology is presented to reduce the final matrix microstresses for metal matrix composites by concurrently optimizing the interphase characteristics and fabrication process. Application cases include interphase tailoring with and without fabrication considerations for two material systems, graphite/copper and silicon carbide/titanium. Results indicate that concurrent interphase/fabrication optimization produces significant reductions in the matrix residual stresses and strong coupling between interphase and fabrication tailoring. The interphase coefficient of thermal expansion and the fabrication consolidation pressure are the most important design parameters and must be concurrently optimized to further reduce the microstresses to more desirable magnitudes.

Nanotechnology overview: Opportunities and challenges

USDA-ARS?s Scientific Manuscript database

Nanotechnology can be defined as the science of manipulating matter at the nanometer scale in order to discover new properties and possibly produce new products. For the past 30 years, a considerable amount of scientific interest and R&D funding devoted to nanotechnology has led to rapid developmen...

Cold plasma: Quality control and regulatory considerations

USDA-ARS?s Scientific Manuscript database

In recent years, cold plasma has emerged as a promising antimicrobial treatment for fresh and fresh-cut produce, nuts, spices, seeds, and other foods. Research has demonstrated effective control of human pathogens such as Salmonella, Listeria monocytogenes, Escherichia coli O157:H7, norovirus, and o...

Gully development processes in the Ethiopian Highlands

USDA-ARS?s Scientific Manuscript database

Gully erosion is an important soil degradation process in a range of environments, causing considerable soil losses and producing large volumes of sediment. In Ethiopia, gully erosion is a major problem expanding at alarming rate and devastating cultivated and grazing lands. The objective of the stu...

Metagenomic analysis of the turkey gut RNA virus community

USDA-ARS?s Scientific Manuscript database

Poultry enteric disease syndromes present an ongoing economic burden to poultry producers worldwide. Despite considerable research into the viral agents associated with these enteric disease syndromes, no single virus has emerged as a likely causative agent and target for prevention and control effo...

Evaluation of the relative risk to birds of alternative pesticides using EPA’s TIM/MCnest Model

EPA Science Inventory

Agricultural producers today have many choices of active ingredients for crop protection. These products come with different active ingredients, different modes of action, and that initiate different adverse outcome pathways. Use patterns also differ considerably among products...

Housing for Migrant Agricultural Workers.

ERIC Educational Resources Information Center

Simons, J. W.; And Others

Intended to assist the producer in meeting the housing regulations of Federal, state, and local governments for migratory workers and thereby to attract better labor through adequate housing, this agricultural handbook contains discussions of the migrant-labor situation; regulations and standards; general housing considerations (i.e., length of…

Native grasses for biomass production at high elevations

USDA-ARS?s Scientific Manuscript database

Recent policies such as the Energy Independence Security Act of 2007 (EISA) and the second U.S. Renewable Fuel Standards (RFS), have targeted biofuel production and domestic energy independence. Hence, considerable interest has focused on producing plant biomass for conversion into biofuels for the...