Dose equivalent neutron dosimeter

DOEpatents

Griffith, Richard V.; Hankins, Dale E.; Tomasino, Luigi; Gomaa, Mohamed A. M.

1983-01-01

A neutron dosimeter is disclosed which provides a single measurements indicating the amount of potential biological damage resulting from the neutron exposure of the wearer, for a wide range of neutron energies. The dosimeter includes a detecting sheet of track etch detecting material such as a carbonate plastic, for detecting higher energy neutrons, and a radiator layer containing conversion material such as .sup.6 Li and .sup.10 B lying adjacent to the detecting sheet for converting moderate energy neutrons to alpha particles that produce tracks in the adjacent detecting sheet. The density of conversion material in the radiator layer is of an amount which is chosen so that the density of tracks produced in the detecting sheet is proportional to the biological damage done by neutrons, regardless of whether the tracks are produced as the result of moderate energy neutrons striking the radiator layer or as the result of higher energy neutrons striking the sheet of track etch material.

26 CFR 36.3121(l)(10)-4 - Payment of amounts equivalent to tax.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Payment of amounts equivalent to tax. 36.3121(l)(10)-4 Section 36.3121(l)(10)-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... SUBSIDIARIES § 36.3121(l)(10)-4 Payment of amounts equivalent to tax. A domestic corporation which has entered...

A Study to Develop a Uniform Measure of Clinical Productivity among Family Practice Physicians from Selected Army Community Hospitals

DTIC Science & Technology

1988-11-01

civilian sector, the physician plays a key role in health care for he is both the customer and the person by which revenue is produced. An economic view of... health care predicts that the more patients that can be seen In a given amount of time, the greater the revenue produced, considering the resources...with the patient . Assumption 1. T’he quality of health care provided by all physiciarns under the study will be equivalent, similar and satisiactory

Fluorspar

USGS Publications Warehouse

Miller, M.

1997-01-01

Developments in the area of fluorspar in 1996 are reviewed. There was no reported mine production of fluorspar the U.S. in 1996, so domestic fluorspar requirements were satisfied by imports, sales from the National Defense Stockpile, and small amounts of synthetic fluorspar produced from industrial waste. The Defence Logistics Agency, consumption, imports, exports, markets, production of synthetic equivalents, and the lack of major developments in the North American industry are discussed.

Development of a fixed bed gasifier model and optimal operating conditions determination

NASA Astrophysics Data System (ADS)

Dahmani, Manel; Périlhon, Christelle; Marvillet, Christophe; Hajjaji, Noureddine; Houas, Ammar; Khila, Zouhour

2017-02-01

The main objective of this study was to develop a fixed bed gasifier model of palm waste and to identify the optimal operating conditions to produce electricity from synthesis gas. First, the gasifier was simulated using Aspen PlusTM software. Gasification is a thermo-chemical process that has long been used, but it remains a perfectible technology. It means incomplete combustion of biomass solid fuel into synthesis gas through partial oxidation. The operating parameters (temperature and equivalence ratio (ER)) were thereafter varied to investigate their effect on the synthesis gas composition and to provide guidance for future research and development efforts in process design. The equivalence ratio is defined as the ratio of the amount of air actually supplied to the gasifier and the stoichiometric amount of air. Increasing ER decreases the production of CO and H2 and increases the production of CO2 and H2O while an increase in temperature increases the fraction of CO and H2. The results show that the optimum temperature to have a syngas able to be effectively used for power generation is 900°C and the optimum equivalence ratio is 0.1.

Effects of agents that inactivate free radical NO (NO•) on nitroxyl anion-mediated relaxations, and on the detection of NO• released from the nitroxyl anion donor Angeli's salt

PubMed Central

Ellis, Anthie; Lu, Hong; Li, Chun Guang; Rand, Michael J

2001-01-01

The effects of agents that inactivate free radical nitric oxide (carboxy-PTIO, hydroxocobalamin and pyrogallol) were tested on relaxations produced by the nitroxyl anion (NO−) donor Angeli's salt in rat aortic rings and anococcygeus muscles. The amount of NO• generated from Angeli's salt in the presence of these agents was measured using a NO•-selective electrode sensor. Carboxy-PTIO (100, 300 μM), hydroxocobalamin (30, 100 μM) and pyrogallol (10, 30 μM) significantly reduced relaxations produced by Angeli's salt (0.3 μM) in aortic rings but not in anococcygeus muscles. NO• generated from Angeli's salt (0.1 – 10 μM), as detected by the sensor electrode, was less than 0.5% of the amount of Angeli's salt added. Carboxy-PTIO (100 μM) and hydroxocobalamin (30 μM), but not pyrogallol significantly increased the amount of NO• detected. In the presence of an oxidizing agent copper [II] (as CuSO4 100 μM), the amount of NO• detected from 0.3 μM of Angeli's salt increased from an undetectable level of 142.7±15.7 nM (equivalent to 47.6% of Angeli's salt added). Under these conditions, carboxy-PTIO, hydroxocobalamin and pyrogallol significantly reduced the amount of NO• detected from Angeli's salt as well as the signal generated by an equivalent amount of authentic NO (0.33 μM). The difference in effects of these agents on relaxations to Angeli's salt in the aorta and the anococcygeus muscle may be explained by the ready conversion of NO− to NO• in the aorta through an unidentified mechanism, which makes NO− susceptible to inactivation by these agents. Furthermore, in addition to inactivating NO•, carboxy-PTIO and hydroxocobalamin may themselves oxidize NO− to NO•, albeit slightly. PMID:11588105

Optimization of optical and mechanical properties of real architecture for 3-dimensional tissue equivalents: Towards treatment of limbal epithelial stem cell deficiency

PubMed Central

Massie, Isobel; Kureshi, Alvena K.; Schrader, Stefan; Shortt, Alex J.; Daniels, Julie T.

2015-01-01

Limbal epithelial stem cell (LESC) deficiency can cause blindness. Transplantation of cultured human limbal epithelial cells (hLE) on human amniotic membrane (HAM) can restore vision but clinical graft manufacture can be unreliable. We have developed a reliable and robust tissue equivalent (TE) alternative to HAM, Real Architecture for 3D Tissue (RAFT). Here, we aimed to optimize the optical and mechanical properties of RAFT TE for treatment of LESC deficiency in clinical application. The RAFT TE protocol is tunable; varying collagen concentration and volume produces differing RAFT TEs. These were compared with HAM samples taken from locations proximal and distal to the placental disc. Outcomes assessed were transparency, thickness, light transmission, tensile strength, ease of handling, degradation rates and suitability as substrate for hLE culture. Proximal HAM samples were thicker and stronger with poorer optical properties than distal HAM samples. RAFT TEs produced using higher amounts of collagen were thicker and stronger with poorer optical properties than those produced using lower amounts of collagen. The ‘optimal’ RAFT TE was thin, transparent but still handleable and was produced using 0.6 ml of 3 mg/ml collagen. Degradation rates of the ‘optimal’ RAFT TE and HAM were similar. hLE achieved confluency on ‘optimal’ RAFT TEs at comparable rates to HAM and cells expressed high levels of putative stem cell marker p63α. These findings support the use of RAFT TE for hLE transplantation towards treatment of LESC deficiency. PMID:26092352

Homogeneous Bacterial Aerosols Produced with a Spinning-Disc Generator

PubMed Central

Harstad, J. Bruce; Filler, Melvin E.; Hushen, William T.; Decker, Herbert M.

1970-01-01

Aerosols composed of viable particles of a uniform size were produced with a commercial spinning-disc generator from aqueous suspensions of Bacillus subtilis var. niger spores containing various amounts of an inert material, dextran, to regulate aerosol particle size. Aerosols composed of single naked spores having an equivalent spherical diameter of 0.87 μm were produced from spore suspensions without dextran, whereas aerosols produced from suspensions containing 0.001, 0.01, 0.1, and 1% dextran had median diameters of 0.90, 1.04, 1.80, and 3.62 μm, respectively. Such aerosols, both homogeneous and viable, would be useful for calibrating air sampling devices, evaluating air filter systems, or for employment wherever aerosol behavior may be size-dependent. Images PMID:4989672

Quantifying the Microbial Utilization of Methanogenesis and Methane Loss from Northern Wetlands

NASA Astrophysics Data System (ADS)

Corbett, J. E.; Tfaily, M.; Burdige, D.; Glaser, P. H.; Chanton, J.

2014-12-01

The importance of methanogenesis and percent of methane loss from the subsurface porewater in various northern wetland sites was quantified with isotope-mass balance equations. With equimolar amounts of CO2 and CH4 produced from methanogenesis, the amount of dissolved CO2 produced from methanogenesis as compared to other decomposition processes can be calculated and is equivalent to the amount of CH4 before loss due to ebullition, plant-mediated transport, and diffusion. This method was applied to porewater samples collected from various locations within permafrost collapse-scar bogs and northern peatlands. From the peatland sites, bogs produced less CO2-meth than fens (2.9 ± 1.3 mM and 3.7 ± 1.4 mM, respectively). Methanogenesis was a more utilized decomposition process in the bogs than the fens. However, greater amounts of CO2-meth found in fen sites was most likely due to the presence of more labile organic substrates resulting in greater overall production. More CH4 was lost in fens (89 ± 2.8%) than bogs (82 ± 5.3%) from plant-mediated transport as fens are dominated by vascular plants (Carex) while bogs are dominated by Sphagnum mosses. In permafrost sites, mid-bogs produced twice the amount of CO2-meth as bog moats (1.6 ± 0.63 mM and 0.82 ± 0.20 mM, respectively). Less methanogenesis was found in bog moats as recently thawed organic matter is exposed to initial decomposition processes and methane production grows over time. A similar amount of CH4 was lost from bog moats as mid bogs (63 ± 7.0% and 64 ± 9.3%, respectively) likely due to the greater density of vascular plants found within a bog moat.

[Subchronic toxicity testing of mold-ripened cheese].

PubMed

Schoch, U; Lüthy, J; Schlatter, C

1984-08-01

The biological effects of known mycotoxins of Penicillium roqueforti or P. camemberti and other still unknown, but potentially toxic metabolites in mould ripened cheese (commercial samples of Blue- and Camembert cheese) were investigated. High amounts of mycelium (equivalents of 100 kg cheese/man and day) were fed to mice in a subchronic feeding trial. The following parameters were determined: development of body weight, organ weights, hematology, blood plasma enzymes. No signs of adverse effects produced by cheese mycotoxins could be detected after 28 days. No still unknown toxic metabolites could be demonstrated. From these results no health hazard from the consumption of mould ripened cheese, even in high amounts, appears to exist.

Environmental impact evaluation of feeds prepared from food residues using life cycle assessment.

PubMed

Ogino, Akifumi; Hirooka, Hiroyuki; Ikeguchi, Atsuo; Tanaka, Yasuo; Waki, Miyoko; Yokoyama, Hiroshi; Kawashima, Tomoyuki

2007-01-01

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.

Electricity generation in microbial fuel cells using neutral red as an electronophore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, D.H.; Zeikus, J.G.

2000-04-01

Neutral red (NR) was utilized as an electron mediator in microbial fuel cells consuming glucose to study both its efficiency during electricity generation and its role in altering anaerobic growth and metabolism of Escherichia coli and Actinobacillus succinogenes. A study of chemical fuel cells in which NADH, NR, and ferricyanide were the electron donor, the electronophore, and the electron acceptor, respectively, showed that electrical current produced from NADH was proportional to the concentration of NADH. Fourfold more current was produced from NADH in chemical fuel cells when NR was the electron mediator than when thionin was the electron mediator. Inmore » microbial fuel cells in which E. coli resting cells were used the amount of current produced from glucose when NR was the electron mediator was 10-fold more than the amount produced when thionin was the electron mediator. The amount of electrical energy generated and the amount of current produced from glucose in NR-mediated microbial fuel cells containing either E. coli or A. succinogenes were about 10- and 2-fold greater, respectively, when resting cells were used than when growing cells were used. Cell growth was inhibited substantially when these microbial fuel cells were making current, and more oxidized end products were formed under these conditions. When sewage sludge was used in the fuel cell, stable and equivalent levels of current were obtained with glucose, as observed in the pure-culture experiments. These results suggest that NR is better than other electron mediators used in microbial fuel cells and that sludge production can be decreased while electricity is produced in fuel cells. Their results are discussed in relation to factors that may improve the relatively low electrical efficiencies obtained with microbial fuel cells.« less

17 CFR 240.17i-7 - Calculations of allowable capital and risk allowances or alternative capital assessment.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Cumulative and non-cumulative preferred stock, except that the amount of cumulative preferred stock may not..., and credit substitutes in as follows: (1) By multiplying the credit equivalent amount of the... accordance with the following: (i) Credit equivalent amount: (A) Certain loans and loan commitments...

17 CFR 240.17i-7 - Calculations of allowable capital and risk allowances or alternative capital assessment.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Cumulative and non-cumulative preferred stock, except that the amount of cumulative preferred stock may not..., and credit substitutes in as follows: (1) By multiplying the credit equivalent amount of the... accordance with the following: (i) Credit equivalent amount: (A) Certain loans and loan commitments...

17 CFR 240.17i-7 - Calculations of allowable capital and risk allowances or alternative capital assessment.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Cumulative and non-cumulative preferred stock, except that the amount of cumulative preferred stock may not..., and credit substitutes in as follows: (1) By multiplying the credit equivalent amount of the... accordance with the following: (i) Credit equivalent amount: (A) Certain loans and loan commitments...

17 CFR 240.17i-7 - Calculations of allowable capital and risk allowances or alternative capital assessment.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Cumulative and non-cumulative preferred stock, except that the amount of cumulative preferred stock may not..., and credit substitutes in as follows: (1) By multiplying the credit equivalent amount of the... accordance with the following: (i) Credit equivalent amount: (A) Certain loans and loan commitments...

Application of byproducts from food processing for production of 2,3-butanediol using Bacillus amyloliquefaciens TUL 308.

PubMed

Sikora, Barbara; Kubik, Celina; Kalinowska, Halina; Gromek, Ewa; Białkowska, Aneta; Jędrzejczak-Krzepkowska, Marzena; Schüett, Fokko; Turkiewicz, Marianna

2016-08-17

A nonpathogenic bacterial strain Bacillus amyloliquefaciens TUL 308 synthesized minor 2,3-butanediol (2,3-BD) amounts from glucose, fructose, sucrose, and glycerol, and efficiently produced the diol from molasses and hydrolysates of food processing residues. Batch fermentations yielded 16.53, 10.72, and 5 g/L 2,3-BD from enzymatic hydrolysates of apple pomace, dried sugar beet pulp, and potato pulp (at initial concentrations equivalent to 45, 20, and 30 g/L glucose, respectively), and 25.3 g/L 2,3-BD from molasses (at its initial concentration equivalent to 60 g/L saccharose). Fed-batch fermentations in the molasses-based medium with four feedings with either glucose or sucrose (in doses increasing their concentration by 25 g/L) resulted in around twice higher maximum 2,3-BD concentration (of about 60 and 50 g/L, respectively). The GRAS Bacillus strain is an efficient 2,3-BD producer from food industry byproducts.

Radiation effects on beta /10.6/ of pure and europium doped KCl

NASA Technical Reports Server (NTRS)

Grimes, H. H.; Maisel, J. E.; Hartford, R. H.

1975-01-01

Changes in the optical absorption coefficient as the result of X-ray and electron bombardment of pure monocrystalline and polycrystalline KCl and of divalent europium doped polycrystalline KCl were determined. A constant heat flow calorimetric method was used to measure the optical absorption coefficients. Both 300 kV X-ray irradiation and 2 MeV electron irradiation produced increases in the optical absorption coefficient at room temperature. X-ray irradiation produced more significant changes in pure monocrystalline KCl than equivalent amounts of electron irradiation. Electron irradiation of pure and Eu-doped polycrystalline KCl produced increases in the absorption by as much as a factor of 20 over untreated material. Bleaching of the electron-irradiated doped KCl with 649 millimicron light produced a further increase.

A three-dimensional skin equivalent reflecting some aspects of in vivo aged skin.

PubMed

Diekmann, Johanna; Alili, Lirija; Scholz, Okka; Giesen, Melanie; Holtkötter, Olaf; Brenneisen, Peter

2016-01-01

Human skin undergoes morphological, biochemical and functional modifications during the ageing process. This study was designed to produce a 3-dimensional (3D) skin equivalent in vitro reflecting some aspects of in vivo aged skin. Reconstructed skin was generated by co-culturing skin fibroblasts and keratinocytes on a collagen-glycosaminoglycan-chitosan scaffold, and ageing was induced by the exposition of fibroblasts to Mitomycin-C (MMC). Recently published data showed that MMC treatment resulted in a drug-induced accelerated senescence (DIAS) in human dermal fibroblast cultures. Next to established ageing markers, histological changes were analysed in comparison with in vivo aged skin. In aged epidermis, the filaggrin expression is reduced in vivo and in vitro. Furthermore, in dermal tissue, the amount of elastin and collagen is lowered in aged skin in vivo as well as after the treatment of 3D skin equivalents with MMC in vitro. Our results show histological signs and some aspects of ageing in a 3D skin equivalent in vitro, which mimics aged skin in vivo. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Aspartame and sucrose produce a similar increase in the plasma phenylalanine to large neutral amino acid ratio in healthy subjects.

PubMed

Burns, T S; Stargel, W W; Tschanz, C; Kotsonis, F N; Hurwitz, A

1991-01-01

Aspartame (L-aspartyl-L-phenylalanine methyl ester) consumption has been postulated to increase brain phenylalanine levels by increasing the molar ratio of the plasma phenylalanine concentration to the sum of the plasma concentrations of the other large neutral amino acids (Phe/LNAA). Dietary manipulations with carbohydrate or protein can also produce changes in the Phe/LNAA value. To compare the effects of aspartame and carbohydrate on Phe/LNAA, beverages sweetened with aspartame, sucrose, and aspartame plus sucrose, and unsweetened beverage were ingested by 8 healthy, fasted subjects in a randomized, four-way crossover design. The beverages were sweetened with an amount of aspartame (500 mg) and/or sucrose (100 g) approximately equivalent to that used to sweeten 1 liter of soft drink. The baseline-corrected plasma Phe/LNAA values did not differ significantly following ingestion of aspartame or sucrose. Following aspartame alone, the high mean ratio increased 26% over baseline 1 h after ingestion. Following sucrose alone, the high mean ratio increased 19% at 2.5 h. Sucrose increased the Phe/LNAA value due to an insulin-mediated decrease in the plasma LNAA, while aspartame increased the ratio by increasing the plasma Phe concentration. These findings indicate that similar increases in plasma Phe/LNAA occur when healthy, fasting subjects ingest amounts of equivalent sweetness of sucrose or aspartame.

Lysophosphatidic acid enhances collagen deposition and matrix thickening in engineered tissue.

PubMed

Chabaud, Stéphane; Marcoux, Thomas-Louis; Deschênes-Rompré, Marie-Pier; Rousseau, Alexandre; Morissette, Amélie; Bouhout, Sara; Bernard, Geneviève; Bolduc, Stéphane

2015-11-01

The time needed to produce engineered tissue is critical. A self-assembly approach provided excellent results regarding biological functions and cell differentiation because it closely respected the microenvironment of cells. Nevertheless, the technique was time consuming for producing tissue equivalents with enough extracellular matrix to allow manipulations. Unlike L-arginine supplementation that only increased accumulation of collagen in cell culture supernatant in our model, addition of lysophosphatidic acid, a natural bioactive lipid, did not modify the amount of accumulated collagen in the cell culture supernatant; however, it enhanced the matrix deposition rate without inducing fibroblast hyperproliferation and tissue fibrosis. Copyright © 2013 John Wiley & Sons, Ltd.

Dose-equivalent neutron dosimeter

DOEpatents

Griffith, R.V.; Hankins, D.E.; Tomasino, L.; Gomaa, M.A.M.

1981-01-07

A neutron dosimeter is disclosed which provides a single measurement indicating the amount of potential biological damage resulting from the neutron exposure of the wearer, for a wide range of neutron energies. The dosimeter includes a detecting sheet of track etch detecting material such as a carbonate plastic, for detecting higher energy neutrons, and a radiator layer contaning conversion material such as /sup 6/Li and /sup 10/B lying adjacent to the detecting sheet for converting moderate energy neutrons to alpha particles that produce tracks in the adjacent detecting sheet.

12 CFR 28.15 - Capital equivalency deposits.

Code of Federal Regulations, 2014 CFR

2014-01-01

... provided by the OCC, a foreign bank's capital equivalency deposits (CED) must consist of: (i) Investment... or agency in a state, it shall determine the CED and the amount of liabilities requiring capital... cases or otherwise, that a foreign bank increase its CED above the minimum amount. For example, the OCC...

12 CFR 28.15 - Capital equivalency deposits.

Code of Federal Regulations, 2013 CFR

2013-01-01

... provided by the OCC, a foreign bank's capital equivalency deposits (CED) must consist of: (i) Investment... or agency in a state, it shall determine the CED and the amount of liabilities requiring capital... cases or otherwise, that a foreign bank increase its CED above the minimum amount. For example, the OCC...

Electricity Generation in Microbial Fuel Cells Using Neutral Red as an Electronophore

PubMed Central

Park, Doo Hyun; Zeikus, J. Gregory

2000-01-01

Neutral red (NR) was utilized as an electron mediator in microbial fuel cells consuming glucose to study both its efficiency during electricity generation and its role in altering anaerobic growth and metabolism of Escherichia coli and Actinobacillus succinogenes. A study of chemical fuel cells in which NADH, NR, and ferricyanide were the electron donor, the electronophore, and the electron acceptor, respectively, showed that electrical current produced from NADH was proportional to the concentration of NADH. Fourfold more current was produced from NADH in chemical fuel cells when NR was the electron mediator than when thionin was the electron mediator. In microbial fuel cells in which E. coli resting cells were used the amount of current produced from glucose when NR was the electron mediator (3.5 mA) was 10-fold more than the amount produced when thionin was the electron mediator (0.4 mA). The amount of electrical energy generated (expressed in joules per mole of substrate) and the amount of current produced from glucose (expressed in milliamperes) in NR-mediated microbial fuel cells containing either E. coli or A. succinogenes were about 10- and 2-fold greater, respectively, when resting cells were used than when growing cells were used. Cell growth was inhibited substantially when these microbial fuel cells were making current, and more oxidized end products were formed under these conditions. When sewage sludge (i.e., a mixed culture of anaerobic bacteria) was used in the fuel cell, stable (for 120 h) and equivalent levels of current were obtained with glucose, as observed in the pure-culture experiments. These results suggest that NR is better than other electron mediators used in microbial fuel cells and that sludge production can be decreased while electricity is produced in fuel cells. Our results are discussed in relation to factors that may improve the relatively low electrical efficiencies (1.2 kJ/mol) obtained with microbial fuel cells. PMID:10742202

12 CFR 1229.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... equivalent employee; (iii) Chief Administrative Officer or an equivalent employee; (iv) Chief Risk Officer or an equivalent employee; (v) Asset and Liability Management officer, or an equivalent employee; (vi...), plus the amount paid-in for the Bank's Class B stock. Risk-based capital requirement means any capital...

7 CFR 51.1837 - Classification of defects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Florida Tangerines Definitions § 51.1837 Classification of...) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of this amount...

7 CFR 51.1837 - Classification of defects.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Florida Tangerines Definitions § 51.1837 Classification of...) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of this amount...

Process for producing silicon nitride based articles of high fracture toughness and strength

DOEpatents

Huckabee, Marvin; Buljan, Sergej-Tomislav; Neil, Jeffrey T.

1991-01-01

A process for producing a silicon nitride-based article of improved fracture toughness and strength. The process involves densifying to at least 98% of theoretical density a mixture including (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 .mu.m and a surface area of about 8-12 m.sup.2 /g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 .mu.m and a surface area of about 2-4 m.sup.2 /g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. Optionally, the mixture may be blended with a binder and injection molded to form a green body, which then may be densified by, for example, hot isostatic pressing.

Process for producing silicon nitride based articles of high fracture toughness and strength

DOEpatents

Huckabee, M.; Buljan, S.T.; Neil, J.T.

1991-09-10

A process for producing a silicon nitride-based article of improved fracture toughness and strength is disclosed. The process involves densifying to at least 98% of theoretical density a mixture including (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 [mu]m and a surface area of about 8-12 m[sup 2]/g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 [mu]m and a surface area of about 2-4 m[sup 2]/g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. Optionally, the mixture may be blended with a binder and injection molded to form a green body, which then may be densified by, for example, hot isostatic pressing.

Forecasting petroleum discoveries in sparsely drilled areas: Nigeria and the North Sea

USGS Publications Warehouse

Attanasi, E.D.; Root, D.H.

1988-01-01

Decline function methods for projecting future discoveries generally capture the crowding effects of wildcat wells on the discovery rate. However, these methods do not accommodate easily situations where exploration areas and horizons are expanding. In this paper, a method is presented that uses a mapping algorithm for separating these often countervailing influences. The method is applied to Nigeria and the North Sea. For an amount of future drilling equivalent to past drilling (825 wildcat wells), future discoveries (in resources found) for Nigeria are expected to decline by 68% per well but still amount to 8.5 billion barrels of oil equivalent (BOE). Similarly, for the total North Sea for an equivalent amount and mix among areas of past drilling (1322 wildcat wells), future discoveries are expected to amount to 17.9 billion BOE, whereas the average discovery rate per well is expected to decline by 71%. ?? 1988 International Association for Mathematical Geology.

Rapid variations of balmer line strengths in the spectra of Be stars. Ph.D. Thesis; [photoelectric spectrophotometric measurements

NASA Technical Reports Server (NTRS)

Mcbeath, K. B.

1974-01-01

Low resolution photoelectric spectrophotometric measurements of the first four members of the Balmer series in the spectra of one Be and five Be (shell) stars were obtained with the 92-cm telescope and image dissecting scanner. Equivalent widths were computed for each observation, and their standard deviations from the mean values were examined. Results indicate that in three of the program stars, at least one of the Balmer lines shows significant fluctuations in equivalent width. These fluctuations amount to a few per cent of total line strength and the time scales appear to be on the order of three to thirty minutes. The fluctuations are not always present in a given star, indicating that the mechanism producing them may not be continuous. The noncontinuous and nonperiodic nature of the variations, along with their short time scale suggest some form of flare-like or shock origin for the phenomenon.

77 FR 1658 - Adjustment of the Amount for the Optional Rider for Proof of NVOCC Financial Responsibility for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... its optional China Bond Rider for Non-Vessel-Operating Common Carriers (NVOCCs). The proposed rule is... equivalent of 800,000 Chinese Renminbi, for which the equivalent dollar amount has fluctuated since the... U.S. Non-Vessel- Operating Common Carriers (NVOCCs) to make a cash deposit in a Chinese bank as...

77 FR 51935 - Adjustment of the Amount for the Optional Bond Rider for Proof of NVOCC Financial Responsibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... for Non- Vessel-Operating Common Carriers (NVOCCs). The final rule is intended to provide NVOCCs with the ability to post a bond with the Commission that satisfies the equivalent of 800,000 Chinese Renminbi, for which the equivalent U.S. Dollar amount has fluctuated since the regulation was first adopted...

Malate-aspartate shuttle and exogenous NADH/cytochrome c electron transport pathway as two independent cytosolic reducing equivalent transfer systems.

PubMed

Abbrescia, Daniela Isabel; La Piana, Gianluigi; Lofrumento, Nicola Elio

2012-02-15

In mammalian cells aerobic oxidation of glucose requires reducing equivalents produced in glycolytic phase to be channelled into the phosphorylating respiratory chain for the reduction of molecular oxygen. Data never presented before show that the oxidation rate of exogenous NADH supported by the malate-aspartate shuttle system (reconstituted in vitro with isolated liver mitochondria) is comparable to the rate obtained on activation of the cytosolic NADH/cytochrome c electron transport pathway. The activities of these two reducing equivalent transport systems are independent of each other and additive. NADH oxidation induced by the malate-aspartate shuttle is inhibited by aminooxyacetate and by rotenone and/or antimycin A, two inhibitors of the respiratory chain, while the NADH/cytochrome c system remains insensitive to all of them. The two systems may simultaneously or mutually operate in the transfer of reducing equivalents from the cytosol to inside the mitochondria. In previous reports we suggested that the NADH/cytochrome c system is expected to be functioning in apoptotic cells characterized by the presence of cytochrome c in the cytosol. As additional new finding the activity of reconstituted shuttle system is linked to the amount of α-ketoglutarate generated inside the mitochondria by glutamate dehydrogenase rather than by aspartate aminotransferase. Copyright © 2011 Elsevier Inc. All rights reserved.

Arbitrary conditional discriminative functions of meaningful stimuli and enhanced equivalence class formation.

PubMed

Nedelcu, Roxana I; Fields, Lanny; Arntzen, Erik

2015-03-01

Equivalence class formation by college students was influenced through the prior acquisition of conditional discriminative functions by one of the abstract stimuli (C) in the to-be-formed classes. Participants in the GR-0, GR-1, and GR-5 groups attempted to form classes under the simultaneous protocol, after mastering 0, 1, or 5 conditional relations between C and other abstract stimuli (V, W, X, Y, Z) that were not included in the to-be-formed classes (ABCDE). Participants in the GR-many group attempted to form classes that contained four abstract stimuli and one meaningful picture as the C stimulus. In the GR-0, GR-1, GR-5, and GR-many groups, classes were formed by 17, 25, 58, and 67% of participants, respectively. Thus, likelihood of class formation was enhanced by the prior formation of five C-based conditional relations (the GR-5 vs. GR-0 condition), or the inclusion of a meaningful stimulus as a class member (the GR-many vs. GR-0 condition). The GR-5 and GR-many conditions produced very similar yields, indicating that class formation was enhanced to a similar degree by including a meaningful stimulus or an abstract stimulus that had become a member of five conditional relations prior to equivalence class formation. Finally, the low and high yields produced by the GR-1 and GR-5 conditions showed that the class enhancement effect of the GR-5 condition was due to the number of conditional relations established during preliminary training and not to the sheer amount of reinforcement provided while learning these conditional relations. Class enhancement produced by meaningful stimuli, then, can be attributed to their acquired conditional discriminative functions as well as their discriminative, connotative, and denotative properties. © Society for the Experimental Analysis of Behavior.

Assessment of physician and patient (child and adult) equivalent doses during renal angiography by Monte Carlo method.

PubMed

Karimian, A; Nikparvar, B; Jabbari, I

2014-11-01

Renal angiography is one of the medical imaging methods in which patient and physician receive high equivalent doses due to long duration of fluoroscopy. In this research, equivalent doses of some radiosensitive tissues of patient (adult and child) and physician during renal angiography have been calculated by using adult and child Oak Ridge National Laboratory phantoms and Monte Carlo method (MCNPX). The results showed, in angiography of right kidney in a child and adult patient, that gall bladder with the amounts of 2.32 and 0.35 mSv, respectively, has received the most equivalent dose. About the physician, left hand, left eye and thymus absorbed the most amounts of doses, means 0.020 mSv. In addition, equivalent doses of the physician's lens eye, thyroid and knees were 0.023, 0.007 and 7.9E-4 mSv, respectively. Although these values are less than the reported thresholds by ICRP 103, it should be noted that these amounts are related to one examination. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Dietary Formulas Fortify Antioxidant Supplements

NASA Technical Reports Server (NTRS)

2013-01-01

The astronaut's life and work is so different from our own daily experiences that it s easy to forget that astronauts are people, too. Just like everyone else, astronauts have basic nutritional needs, such as five to nine servings of fruit and vegetables per day, in order to maintain optimal health. Here on Earth, it can be a challenge to incorporate the recommended amount of fruit and veggies into our diets, despite easy access to fresh produce. In space, it becomes even more difficult, as astronauts must take everything they need with them. And in the harsh conditions of space, many miles from medical assistance, proper nutrition takes on added importance. As NASA makes plans to send astronauts on missions that could take months and even years, the Agency explores new ways to provide astronauts with a daily dose of nutrition equivalent to that provided by fresh produce. These foods are critically important because they provide the essential vitamins, minerals, pigments, and other micronutrients (substances required in small amounts for human health) that promote everything from healthy skin to a strong heart.

Valorization of biogas into liquid hydrocarbons in plasma-catalyst reactor

NASA Astrophysics Data System (ADS)

Nikravech, Mehrdad; Rahmani, Abdelkader; Labidi, Sana; Saintini, Noiric

2016-09-01

Biogas represents an important source of renewable energy issued from biological degradation of biomass. It is planned to produce in Europe the amount of biogas equivalent to 6400 kWh electricity and 4500 kteo (kilo tons equivalent oil) in 2020. Currently the biogas is used in cogeneration engines to produce heat and electricity directly in farms or it is injected in gas networks after purification and odorisation. The aim of this work is to propose a third option that consists of valorization of biogas by transformation into liquid hydrocarbons like acetone, methanol, ethanol, acetic acid etc. These chemicals, among the most important feed materials for chemical industries, retain CO2 molecules participating to reduce the greenhouse gas emissions and have high storage energy capacity. We developed a low temperature atmospheric plasma-catalyst reactor (surface dielectric barrier discharge) to transform biogas into chemicals. The conversion rates of CH4 and CO2 are respectively about 50% and 30% depending on operational conditions. The energetic cost is 25 eV/molecule. The yields of liquid hydrocarbon reaches currently 10% wt. More the 11 liquid chemicals are observed in the liquid fraction. Acknowledgements are due to SPC Programme Energie de demain.

The synthesis, structure and properties of N-acetylated derivatives of ethyl 3-amino-1H-pyrazole-4-carboxylate.

PubMed

Kusakiewicz-Dawid, Anna; Masiukiewicz, Elzbieta; Rzeszotarska, Barbara; Dybała, Izabela; Kozioł, Anna Eugenia; Broda, Małgorzata Anna

2007-05-01

Ethyl 3-amino-1H-pyrazole-4-carboxylate (1) was yielded through total synthesis and reacted with acetic anhydride to give the acetylated products 2-6. Compounds 1-6 were studied with HPLC, X-ray, FT-IR, (1)H-NMR, (13)C-NMR and MS. Acetylation was carried out in solvents of various polarity, namely; chloroform; dioxane; DMF; acetic anhydride, at room temperature and at boiling points; and in the presence and absence of DMAP. The acetylated products are mainly nitrogen atoms in the ring. The position of the ring proton in the solution was based on NOESY; multinuclear HMBC, HSQC spectra and calculations. For equivalent amounts (1-1.5 mol) of acetic anhydride at room temperature two products of monoacetylation are produced in the ring: 2 and 3, ca. 2 : 1 and at the same time only small amount of the third product of monoacetylated, 5 in DMF, as well the product diacetylated, 4. The greatest amount of the product 4 is produced during the reaction with chloroform. However, in this solvent and in dioxane no product 5 is produced. Compound 2 is, largely, formed in dimethylformamide, in the presence DMAP, 0.2 eq. In the presence of this catalytic base, for the first hour, there is a mixture 2 and 3 to the ratio ca. 95 : 5. With 8 eq of Ac(2)O at reflux, after another hour, the compounds 3, 4 and 6 appear about equal amounts. After a longer time, the compound, which appears most in this mixture is triacetylated derivative 6. The structural and spectroscopic characteristics of compounds 1-6 have been given and the methods for their preparation have been provided.

Edible provenances of Jatropha curcas from Quintana Roo state of Mexico and effect of roasting on antinutrient and toxic factors in seeds.

PubMed

Makkar, H P; Becker, K; Schmook, B

1998-01-01

Seven seed samples of J. curcas, both in raw and roasted state, sold in some villages in Quintana Roo state, Mexico for human consumption were analyzed for physical characteristics, nutrients and antinutrients. The average seed weight varied from 0.53 to 0.74 g and kernel weight as proportion of raw seed weight was from 61 to 66%. The contents of crude protein, lipid and ash of kernels from raw seeds were 27-30%, 55-62% and 3.7-5.2% respectively. The levels of antinutrients in meal from the raw seeds were: trypsin inhibitor activity (14.6-28.7 mg trypsin inhibited/g), lectin (25.6-52.2 unit; one unit is the reverse of minimum amount of mg meal/ml assay which produced haemagglutination), saponins (1.9-2.3% as diosgenin equivalent) and phytate (8.4-10%). Phorbol esters in kernels from raw seeds were not detected in four samples and in other three samples it ranged from 0.01 to 0.02 mg/g as phorbol-12-myristate 13-acetate equivalent. Roasting of seeds inactivated almost 100% of trypsin inhibitor activity. Although lectin activity reduced on roasting, it was still present in high amounts. Saponins, phytate and phorbol esters were not affected by roasting.

Highly chlorinated unintentionally produced persistent organic pollutants generated during the methanol-based production of chlorinated methanes: A case study in China.

PubMed

Zhang, Lifei; Yang, Wenlong; Zhang, Linli; Li, Xiaoxiu

2015-08-01

The formation of unintentionally produced persistent organic pollutants (POPs) may occur during various chlorination processes. In this study, emissions of unintentionally produced POPs during the methanol-based production of chlorinated methanes were investigated. High concentrations of highly chlorinated compounds such as decachlorobiphenyl, octachloronaphthalene, octachlorostyrene, hexachlorobutadiene, hexachlorocyclopentadiene, hexachlorobenzene, and pentachlorobenzene were found in the carbon tetrachloride byproduct of the methanol-based production of chlorinated methanes. The total emission amounts of hexachlorocyclopentadiene, hexachlorobutadiene, polychlorinated benzenes, polychlorinated naphthalenes, octachlorostyrene, and polychlorinated biphenyls released during the production of chlorinated methanes in China in 2010 were estimated to be 10080, 7350, 5210, 427, 212, and 167 kg, respectively. Moreover, polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) were formed unintentionally during chlorinated methanes production, the emission factor for PCDDs/DFs was 364 μg toxic equivalency quotient (TEQ) t(-1) product for residues, which should be added into the UNEP toolkit for updating. It was worth noting that a high overall toxic equivalency quotient from polychlorinated naphthalenes and PCDDs/DFs was generated from the chlorinated methanes production in China in 2010. The values reached 563 and 32.8 g TEQ, respectively. The results of the study indicate that more research and improved management systems are needed to ensure that the methanol-based production of chlorinated methanes can be achieved safely. Copyright © 2015 Elsevier Ltd. All rights reserved.

Clinical Trial with Sodium 99mTc-Pertechnetate Produced by a Medium-Energy Cyclotron: Biodistribution and Safety Assessment in Patients with Abnormal Thyroid Function.

PubMed

Selivanova, Svetlana V; Lavallée, Éric; Senta, Helena; Caouette, Lyne; McEwan, Alexander J B; Guérin, Brigitte; Lecomte, Roger; Turcotte, Éric

2017-05-01

A single-site prospective open-label clinical study with cyclotron-produced sodium 99m Tc-pertechnetate ( 99m Tc-NaTcO 4 ) was performed in patients with indications for a thyroid scan to demonstrate the clinical safety and diagnostic efficacy of the drug and to confirm its equivalence with conventional 99m Tc-NaTcO 4 eluted from a generator. Methods: 99m Tc-NaTcO 4 was produced from enriched 100 Mo (99.815%) with a cyclotron (24 MeV; 2 h of irradiation) or supplied by a commercial manufacturer (bulk vial eluted from a generator). Eleven patients received 325 ± 29 (mean ± SD) MBq of the cyclotron-produced 99m Tc-NaTcO 4 , whereas the age- and sex-matched controls received a comparable amount of the generator-derived tracer. Whole-body and thyroid planar images were obtained for each participant. In addition to the standard-energy window (140.5 keV ± 7.5%), data were acquired in lower-energy (117 keV ± 10%) and higher-energy (170 keV ± 10%) windows. Vital signs and hematologic and biochemical parameters were monitored before and after tracer administration. Results: Cyclotron-produced 99m Tc-NaTcO 4 showed organ and whole-body distributions identical to those of conventional 99m Tc-NaTcO 4 and was well tolerated. All images led to a clear final diagnosis. The fact that the number of counts in the higher-energy window was significantly higher for cyclotron-produced 99m Tc-NaTcO 4 did not influence image quality in the standard-energy window. Image definition in the standard-energy window with cyclotron-produced 99m Tc was equivalent to that with generator-eluted 99m Tc and had no particular features allowing discrimination between the 99m Tc production methods. Conclusion: The systemic distribution, clinical safety, and imaging efficacy of cyclotron-produced 99m Tc-NaTcO 4 in humans provide supporting evidence for the use of this tracer as an equivalent for generator-eluted 99m Tc-NaTcO 4 in routine clinical practice. © 2017 by the Society of Nuclear Medicine and Molecular Imaging.

78 FR 73128 - Dividend Equivalents From Sources Within the United States

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-05

... Dividend Equivalents From Sources Within the United States AGENCY: Internal Revenue Service (IRS), Treasury... dividends, and the amount of the dividend equivalents. This information is required to establish whether a... valid control number assigned by the Office of Management and Budget. Books or records relating to a...

Effect of various electrolytes upon cardiac and skeletal musculature

PubMed Central

Selye, H.; Bajusz, E.

1959-01-01

In rats kept on a low-potassium diet that contains only maintenance levels of magnesium, cardiac necroses and muscular cramps were readily induced by the oral administration of sodium perchlorate or disodium hydrogen phosphate. The precipitation of these cardiac and skeletal muscle changes by sodium chlorate was prevented by the prophylactic administration of either potassium or magnesium chlorides. The protective effect of these chlorides against the cardiotoxic and convulsive effects of disodium hydrogen phosphate has already been demonstrated by our earlier experiments. Sodium sulphate produced cardiac necroses in rats maintained on the same diet, and both potassium and magnesium chlorides had a prophylactic action. Unlike sodium perchlorate, however, sodium sulphate produced no muscular cramps under these conditions. Equimolecular amounts of sodium given in the form of sodium chloride (instead of sodium perchlorate, sodium sulphate, or disodium hydrogen phosphate) did not cause cardiac necroses or muscular cramps in rats maintained on the potassium-deficient diet. As the same three sodium salts, namely the perchlorate, the sulphate, and the hydrogen phosphate, produced cardiac necroses in rats sensitized by either a potassium-deficient diet or by certain corticoids, it seems that the anion must play a decisive rôle, since equivalent amounts of NaCl are ineffective. PMID:13651583

Analysis of multi-layered films. [determining dye densities by applying a regression analysis to the spectral response of the composite transparency

NASA Technical Reports Server (NTRS)

Scarpace, F. L.; Voss, A. W.

1973-01-01

Dye densities of multi-layered films are determined by applying a regression analysis to the spectral response of the composite transparency. The amount of dye in each layer is determined by fitting the sum of the individual dye layer densities to the measured dye densities. From this, dye content constants are calculated. Methods of calculating equivalent exposures are discussed. Equivalent exposures are a constant amount of energy over a limited band-width that will give the same dye content constants as the real incident energy. Methods of using these equivalent exposures for analysis of photographic data are presented.

Effect of different bile salts on the relative hypoglycemia of witepsol W35 suppositories containing insulin in diabetic Beagle dogs.

PubMed

Hosny, E A; Al-Shora, H I; Elmazar, M M

2001-09-01

Insulin suppositories were formulated using Witepsol W35 as a base to investigate the effect of various bile salts/acids on the plasma glucose concentration of diabetic beagle dogs. Comparison of the effect of these formulations was made with that produced by insulin subcutaneous injections. Of the bile salts/acids studied, incorporation of 100 mg of deoxycholic acid (DCA), sodium cholate (NaC), or sodium deoxycholate (NaDC) with insulin (10 U/Kg) showed that suppositories containing NaDC produced the highest area under the curve (AUC) and relative hypoglycemia (RH) of 290 +/- 83 mg%h and 28% +/- 8.1%, respectively. To study the optimum amount of NaDC in insulin suppositories to produce the highest RH, 50-200 mg/suppository were used, and we found that 150 mg NaDC produced 35% +/- 13% RH. We also studied the influence of different doses of insulin (5-20 U/kg) in the presence of NaDC (100 mg). It was found that increase of the insulin dose was accompanied by an increase in AUC and maximum reduction in plasma glucose level Cmax. A combination of NaDC (100 mg) and NaC (50 mg) produced an AUC of 252 +/- 13mg%h and an RH of 49% +/- 2.6%, which were higher than produced by either of its individual components (NaC 50 mg or NaDC 100 mg) when used alone or when compared with an equivalent amount of NaDC (150 mg). When the effect of sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC) was studied, it was found that an insulin suppository containing 100 mg of either NaTC or NaTDC produced an RH equivalent to that produced previouslY with a mixture of NaDC (100 mg) and NaC (50 mg). On the other hand, NaC (50 mg) did not improve the hypoglycemic effect of NaTC any further. In conclusion, a relative hYpoglycemia of about 50% can be reached using insulin suppositories containing Witepsol W35 as a base and NaDC plus NaC (100 mg plus 50 mg, respectively), NaTDC (100mg), or NaTC (100 mg) as rectal absorption enhancers of insulin. A desirable hypoglycemia, expressed as Cmax, and/or AUC can be reached by adjusting the insulin dose in the formulation according to the degree of hyperglycemia.

45 CFR 2400.43 - Required courses of graduate study.

Code of Federal Regulations, 2014 CFR

2014-10-01

... § 2400.43(b) must amount to at least 12 semester or 18 quarter hours or their credit hour equivalent of... credit hour equivalent of such study is strongly encouraged. (b) The courses that fulfill the required minimum of 12 semester hours or their credit hour equivalent of study of the United States Constitution...

45 CFR 2400.43 - Required courses of graduate study.

Code of Federal Regulations, 2011 CFR

2011-10-01

... § 2400.43(b) must amount to at least 12 semester or 18 quarter hours or their credit hour equivalent of... credit hour equivalent of such study is strongly encouraged. (b) The courses that fulfill the required minimum of 12 semester hours or their credit hour equivalent of study of the United States Constitution...

45 CFR 2400.43 - Required courses of graduate study.

Code of Federal Regulations, 2013 CFR

2013-10-01

... § 2400.43(b) must amount to at least 12 semester or 18 quarter hours or their credit hour equivalent of... credit hour equivalent of such study is strongly encouraged. (b) The courses that fulfill the required minimum of 12 semester hours or their credit hour equivalent of study of the United States Constitution...

Conditioned taste avoidance induced by forced and voluntary wheel running in rats.

PubMed

Forristall, J R; Hookey, B L; Grant, V L

2007-03-01

Voluntary exercise by rats running in a freely rotating wheel (free wheel) produces conditioned taste avoidance (CTA) of a flavored solution consumed before running [e.g., Lett, B.T., Grant, V.L., 1996. Wheel running induces conditioned taste aversion in rats trained while hungry and thirsty. Physiol. Behav. 59, 699-702]. Forced exercise, swimming or running, also produces CTA in rats [e.g., Masaki, T., Nakajima, S., 2006. Taste aversion induced by forced swimming, voluntary running, forced running, and lithium chloride injection treatments. Physiol. Behav. 88, 411-416]. Energy expenditure may be the critical factor in producing such CTA. If so, forced running in a motorized running wheel should produce CTA equivalent to that produced by a similar amount of voluntary running. In two experiments, we compared forced running in a motorized wheel with voluntary running in a free wheel. Mean distance run over 30 min was equated as closely as possible in the two apparatuses. Both types of exercise produced CTA relative to sedentary, locked-wheel controls. However, voluntary running produced greater CTA than forced running. We consider differences between running in the free and motorized wheels that may account for the differences in strength of CTA.

Bioethanol production by a xylan fermenting thermophilic isolate Clostridium strain DBT-IOC-DC21.

PubMed

Singh, Nisha; Puri, Munish; Tuli, Deepak K; Gupta, Ravi P; Barrow, Colin J; Mathur, Anshu S

2018-06-01

To overcome the challenges associated with combined bioprocessing of lignocellulosic biomass to biofuel, finding good organisms is essential. An ethanol producing bacteria DBT-IOC-DC21 was isolated from a compost site via preliminary enrichment culture on a pure hemicellulosic substrate and identified as a Clostridium strain by 16S rRNA analysis. This strain presented broad substrate spectrum with ethanol, acetate, lactate, and hydrogen as the primary metabolic end products. The optimum conditions for ethanol production were found to be an initial pH of 7.0, a temperature of 70 °C and an L-G ratio of 0.67. Strain presented preferential hemicellulose fermentation when compared to various substrates and maximum ethanol concentration of 26.61 mM and 43.63 mM was produced from xylan and xylose, respectively. During the fermentation of varying concentration of xylan, a substantial amount of ethanol ranging from 25.27 mM to 67.29 mM was produced. An increased ethanol concentration of 40.22 mM was produced from a mixture of cellulose and xylan, with a significant effect observed on metabolic flux distribution. The optimum conditions were used to produce ethanol from 28 g L -1 rice straw biomass (RSB) (equivalent to 5.7 g L -1 of the xylose equivalents) in which 19.48 mM ethanol production was achieved. Thus, Clostridium strain DBT-IOC-DC21 has the potential to perform direct microbial conversion of untreated RSB to ethanol at a yield comparative to xylan fermentation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Characteristics of MSW and heat energy recovery between residential and commercial areas in Seoul.

PubMed

Yi, Sora; Yoo, Kee-Young; Hanaki, Keisuke

2011-03-01

This paper analyzes the amount and characteristics of municipal solid waste (MSW) according to the inhabitant density of population and the business concentration in 25 districts in Seoul. Further, the heat energy recovery and avoided CO(2) emissions of four incineration plants located in residential and commercial areas in Seoul are examined. The amount of residential waste per capita tended to increase as the density of inhabitants decreased. The amount of commercial waste per capita tended to increase as the business concentration increased. The examination of the heat energy recovery characteristics indicated that the four incineration plants produced heat energy that depended on residential or commercial areas based on population and business. The most important result regarding avoided CO(2) emissions was that commercial areas with many office-type businesses had the most effective CO(2) emission savings by combusting 1 kg of waste. Assuming the full-scale operation of the four incineration plants, the amount of saved CO(2) emissions per year was 444 Gg CO(2) and 57,006 households in Seoul can be provided with heat energy equivalent to 542,711 Nm(3) of LNG. Copyright © 2010 Elsevier Ltd. All rights reserved.

20 CFR 416.2098 - Supplementary payment levels.

Code of Federal Regulations, 2014 CFR

2014-04-01

... payment. +9.70 July 1983 COLA-equivalent. 529.10 Required July 1983 combined payment level. 529.10... amount for a 31-day month plus the July 1983 COLA-equivalent ($519.40 + $9.70). (f) Required optional...

20 CFR 416.2098 - Supplementary payment levels.

Code of Federal Regulations, 2013 CFR

2013-04-01

... payment. +9.70 July 1983 COLA-equivalent. 529.10 Required July 1983 combined payment level. 529.10... amount for a 31-day month plus the July 1983 COLA-equivalent ($519.40 + $9.70). (f) Required optional...

20 CFR 416.2098 - Supplementary payment levels.

Code of Federal Regulations, 2012 CFR

2012-04-01

... payment. +9.70 July 1983 COLA-equivalent. 529.10 Required July 1983 combined payment level. 529.10... amount for a 31-day month plus the July 1983 COLA-equivalent ($519.40 + $9.70). (f) Required optional...

20 CFR 416.2098 - Supplementary payment levels.

Code of Federal Regulations, 2011 CFR

2011-04-01

... payment. +9.70 July 1983 COLA-equivalent. 529.10 Required July 1983 combined payment level. 529.10... amount for a 31-day month plus the July 1983 COLA-equivalent ($519.40 + $9.70). (f) Required optional...

5 CFR 2421.17 - Regular and substantially equivalent employment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equivalent employment means employment that entails substantially the same amount of work, rate of pay, hours, working conditions, location of work, kind of work, and seniority rights, if any, of an employee prior to...

Biofuels done right: land efficient animal feeds enable large environmental and energy benefits.

PubMed

Dale, Bruce E; Bals, Bryan D; Kim, Seungdo; Eranki, Pragnya

2010-11-15

There is an intense ongoing debate regarding the potential scale of biofuel production without creating adverse effects on food supply. We explore the possibility of three land-efficient technologies for producing food (actually animal feed), including leaf protein concentrates, pretreated forages, and double crops to increase the total amount of plant biomass available for biofuels. Using less than 30% of total U.S. cropland, pasture, and range, 400 billion liters of ethanol can be produced annually without decreasing domestic food production or agricultural exports. This approach also reduces U.S. greenhouse gas emissions by 670 Tg CO₂-equivalent per year, or over 10% of total U.S. annual emissions, while increasing soil fertility and promoting biodiversity. Thus we can replace a large fraction of U.S. petroleum consumption without indirect land use change.

Modeling of the Electric Characteristics of Solar Cells

NASA Astrophysics Data System (ADS)

Logan, Benjamin; Tzolov, Marian

The purpose of a solar cell is to covert solar energy, through means of photovoltaic action, into a sustainable electrical current that produces usable electricity. The electrical characteristics of solar cells can be modeled to better understand how they function. As an electrical device, solar cells can be conveniently represented as an equivalent electrical circuit with an ideal diode, ideal current source for the photovoltaic action, a shunt resistor for recombination, a resistor in series to account for contact resistance, and a resistor modeling external power consumption. The values of these elements have been modified to model dark and illumination states. Fitting the model to the experimental current voltage characteristics allows to determine the values of the equivalent circuit elements. Comparing values of open circuit voltage, short circuit current, and shunt resistor can determine factors such as the amount of recombination to diagnose problems in solar cells. The many measurable quantities of a solar cell's characteristics give guidance for the design when they are related with microscopic processes.

Electrochemical mercerization, souring, and bleaching of textiles

DOEpatents

Cooper, J.F.

1995-10-10

Economical, pollution-free treatment of textiles occurs in a low voltage electrochemical cell that mercerizes (or scours), sours, and optionally bleaches without effluents and without the purchase of bulk caustic, neutralizing acids, or bleaches. The cell produces base in the cathodic chamber for mercerization and an equivalent amount of acid in the anodic chamber for neutralizing the fabric. Gas diffusion electrodes are used for one or both electrodes and may simultaneously generate hydrogen peroxide for bleaching. The preferred configuration is a stack of bipolar electrodes, in which one or both of the anode and cathode are gas diffusion electrodes, and where no hydrogen gas is evolved at the cathode. 5 figs.

Electrochemical mercerization, souring, and bleaching of textiles

DOEpatents

Cooper, John F.

1995-01-01

Economical, pollution-free treatment of textiles occurs in a low voltage electrochemical cell that mercerizes (or scours), sours, and optionally bleaches without effluents and without the purchase of bulk caustic, neutralizing acids, or bleaches. The cell produces base in the cathodic chamber for mercerization and an equivalent amount of acid in the anodic chamber for neutralizing the fabric. Gas diffusion electrodes are used for one or both electrodes and may simultaneously generate hydrogen peroxide for bleaching. The preferred configuration is a stack of bipolar electrodes, in which one or both of the anode and cathode are gas diffusion electrodes, and where no hydrogen gas is evolved at the cathode.

Potent Adjuvant Activity of Cationic Liposome-DNA Complexes for Genital Herpes Vaccines▿

PubMed Central

Bernstein, David I.; Cardin, Rhonda D.; Bravo, Fernando J.; Strasser, Jane E.; Farley, Nicholas; Chalk, Claudia; Lay, Marla; Fairman, Jeff

2009-01-01

Development of a herpes simplex virus (HSV) vaccine is a priority because these infections are common. It appears that potent adjuvants will be required to augment the immune response to subunit HSV vaccines. Therefore, we evaluated cationic liposome-DNA complexes (CLDC) as an adjuvant in a mouse model of genital herpes. Using a whole-virus vaccine (HVAC), we showed that the addition of CLDC improved antibody responses compared to vaccine alone. Most important, CLDC increased survival, reduced symptoms, and decreased vaginal virus replication compared to vaccine alone or vaccine administered with monophosphoryl lipid A (MPL) plus trehalose dicorynomycolate (TDM) following intravaginal challenge of mice. When CLDC was added to an HSV gD2 vaccine, it increased the amount of gamma interferon that was produced from splenocytes stimulated with gD2 compared to the amount produced with gD2 alone or with MPL-alum. The addition of CLDC to the gD2 vaccine also improved the outcome following vaginal HSV type 2 challenge compared to vaccine alone and was equivalent to vaccination with an MPL-alum adjuvant. CLDC appears to be a potent adjuvant for HSV vaccines and should be evaluated further. PMID:19279167

Particulates generated from combustion of polymers (plastics).

PubMed

Shemwell, B E; Levendis, Y A

2000-01-01

This is an experimental study on the characterization of particulate (soot) emissions from burning polymers. Emissions of polystyrene (PS), polyethylene (PE), polypropylene (PP), polymethyl methacrylate (PMMA), and polyvinyl chloride (PVC) plastics were studied. Combustion took place in a laboratory-scale, electrically heated, drop-tube furnace at temperatures of 1300 and 1500 K, in air. The nominal bulk (global) equivalence ratio, phi, was varied in the range of 0.5-1.5, and the gas residence time in the nearly isothermal radiation zone of the furnace was approximately 1 sec. The particulate emissions were size-classified at the exit of the furnace, using a multi-stage inertial particle impactor. Results showed that both the yields and the size distributions of the emitted soot were remarkably different for the five plastics burned. Soot yields increased with an increasing bulk equivalence ratio. Combustion of PS yielded the highest amounts of soot (most highly agglomerated), several times more than the rest of the polymers. More soot was emitted from PS at 1500 than at 1300 K. Substantial amounts of soot agglomerates were larger than 9 microns. At 1500 and 1300 K, 35 and 29% of the soot mass, respectively, was PM2 (2 microns or smaller). Emissions from PE and PP were remarkably similar to each other. These polymers produced very low emissions at phi < or = 0.5, but emissions increased drastically with phi, and most of the soot was very fine (70-97% of the mass was PM2, depending on phi). Emissions from the combustion of PMMA were comparatively low and were the least influenced by the bulk phi, and 79-95% of the emissions were PM2. Combustion of PVC yielded the lowest amounts of soot; moreover, only 13-34% of the mass was PM2. On a comparative basis, at 1500 K, the following ranges of particulate yields were PM2: 19-75 mg/g of PS, 8-36 mg/g of PE, 1.5-47 mg/g of PP, 11-20 mg/g of PMMA, and 2-8 mg/g of PVC, depending on phi. These comparative results demonstrate that PS produces the highest amounts of fine particulates, followed by PP, PE, and PMMA, and then PVC. Burning these materials with excess oxygen drastically reduces the particulate emissions of PE and PP, substantially reduces those of PS, and mildly reduces those of PMMA and PVC.

26 CFR 1.108-6 - Limitations on the exclusion of income from the discharge of qualified real property business...

Code of Federal Regulations, 2010 CFR

2010-04-01

..., immediately before the discharge, are equivalent to principal, in that interest on such amounts would accrue and compound in the future, except that outstanding principal amount shall not include amounts that...

Microcystin production and ecological physiology of Caribbean black band disease cyanobacteria.

PubMed

Stanić, Dina; Oehrle, Stuart; Gantar, Miroslav; Richardson, Laurie L

2011-04-01

Molecular studies of black band disease (BBD), a coral disease found on tropical and subtropical reefs worldwide, have shown that one 16S rRNA gene sequence is ubiquitous. This sequence has been reported to be a member of the cyanobacterial genus Oscillatoria. In this study, extracts of two cultured laboratory strains of BBD Oscillatoria, and for comparison two strains of BBD Geitlerinema, all isolated from reefs of the wider Caribbean, were analysed using Ultra-Performance Liquid Chromatography-Tandem Quad Mass Spectrometry (UPLC-MS/MS). The cyanotoxin microcystin-LR (MC-LR) was found in all strains, and one Geitlerinema strain additionally produced MC-YR. Growth experiments that monitored toxin production using enzyme-linked immunosorbent assay (ELISA) showed that BBD Oscillatoria produced yields of MC-LR equivalent (0.02-0.04 mg g(-1)) independent of biomass and culture conditions (varying temperature, pH, light and organic carbon). This pattern is different from BBD Geitlerinema, which increased production of MC-LR equivalent in the presence of organic carbon in the light and dark and at a relatively lower temperature. These results indicate that different species and strains of BBD cyanobacteria, which can occur in the same BBD infection, may contribute to BBD pathobiology by producing different toxins and different amounts of toxin at different stages in the disease process. This is the first detailed study of laboratory cultures of the ubiquitous BBD cyanobacterium Oscillatoria sp. isolated from Caribbean reefs. © 2010 Society for Applied Microbiology and Blackwell Publishing Ltd.

Estimation of the nitric oxide formed from hydroxylamine by Nitrosomonas

PubMed Central

Anderson, J. H.

1965-01-01

1. Nitric oxide that was produced by reducing nitrite with an excess of acidified potassium iodide under nitrogen in Warburg respirometer flasks was rapidly absorbed by a solution of permanganate in sodium hydroxide held in the side arm. A small amount of nitrous oxide (or nitrogen) that was also produced was not absorbed. 2. By using a quantitative method for the recovery of nitrite from samples of the alkaline permanganate, it was found that the sum of the nitrite N formed and the residual nitrous oxide N was equivalent to the nitrite N used to generate the gases. These results showed that alkaline permanganate completely oxidized nitric oxide to nitrite. The method was suitable for determining 0·4–20 μmoles of nitric oxide. 3. The technique was used to determine the nitric oxide content of the nitrogenous gas that was produced anaerobically from hydroxylamine by an extract of the autotrophic nitrifying micro-organism Nitrosomonas in the presence of methylene blue as electron acceptor. PMID:14342235

Assessments of Total and Viable Escherichia coli O157:H7 on Field and Laboratory Grown Lettuce

PubMed Central

Moyne, Anne-Laure; Harris, Linda J.; Marco, Maria L.

2013-01-01

Leafy green produce has been associated with numerous outbreaks of foodborne illness caused by strains of Escherichia coli O157:H7. While the amounts of culturable E. coli O157:H7 rapidly decline after introduction onto lettuce in the field, it remains to be determined whether the reduction in cell numbers is due to losses in cell viability, cell injury and a subsequent inability to be detected by standard laboratory culturing methods, or a lack of adherence and hence rapid removal of the organism from the plants during application. To assess which of these options is most relevant for E. coli O157:H7 on leafy green produce, we developed and applied a propidium monoazide (PMA) real-time PCR assay to quantify viable (with PMA) and total (without PMA) E. coli O157:H7 cells on growth chamber and field-grown lettuce. E. coli O157:H7, suspended in 0.1% peptone, was inoculated onto 4-week-old lettuce plants at a level of approximately 106 CFU/plant. In the growth chamber at low relative humidity (30%), culturable amounts of the nontoxigenic E. coli O157:H7 strain ATCC 700728 and the virulent strain EC4045 declined 100 to 1000-fold in 24 h. Fewer E. coli O157:H7 cells survived when applied onto plants in droplets with a pipette compared with a fine spray inoculation. Total cells for both strains were equivalent to inoculum levels for 7 days after application, and viable cell quantities determined by PMA real-time PCR were approximately 104 greater than found by colony enumeration. Within 2 h after application onto plants in the field, the number of culturable E. coli ATCC 700728 was reduced by up to 1000-fold, whereas PCR-based assessments showed that total cell amounts were equivalent to inoculum levels. These findings show that shortly after inoculation onto plants, the majority of E. coli O157:H7 cells either die or are no longer culturable. PMID:23936235

Recycling of solid waste rich in organic nitrogen from leather industry: mineral nutrition of rice plants.

PubMed

Nogueira, Francisco G E; Castro, Isabela A; Bastos, Ana R R; Souza, Guilherme A; de Carvalho, Janice G; Oliveira, Luiz C A

2011-02-28

The leather industry produces a large quantity of solid waste (wet blue leather), which contains a high amount of chromium. After its removal from wet blue leather, a solid collagenic material is recovered, containing high nitrogen levels, which can be used as a nitrogen source in agriculture. In order to take more advantage of the collagen, it was enriched with mineral P and K in order to produce NPK formulations. The objective was also to evaluate the efficiency of such formulations as a nutrient supply for rice plants in an Oxisoil, under greenhouse conditions. The application of PK enriched-collagen formulations resulted in N contents in the vegetative parts and grains of rice plants which were equivalent or superior to those obtained with urea and commercial NPK formulations. Copyright © 2010 Elsevier B.V. All rights reserved.

Reduced sympathetic innervation after alteration of target cell neurotransmitter phenotype in transgenic mice.

PubMed Central

Cho, S; Son, J H; Park, D H; Aoki, C; Song, X; Smith, G P; Joh, T H

1996-01-01

Neurotransmitters play a variety of important roles during nervous system development. In the present study, we hypothesized that neurotransmitter phenotype of both projecting and target cells is an important factor for the final synaptic linkage and its specificity. To test this hypothesis, we used transgenic techniques to convert serotonin/melatonin-producing cells of the pineal gland into cells that also produce dopamine and investigated the innervation of the phenotypically altered target cells. This phenotypic alteration markedly reduced the noradrenergic innervation originating from the superior cervical ganglia. Although the mechanism by which the reduction occurs is presently unknown, quantitative enzyme-linked immunoassay showed the presence of the equivalent amounts of nerve growth factor (NGF) in the control and transgenic pineal glands, suggesting that it occurred in a NGF-independent manner. The results suggest that target neurotransmitter phenotype influences the formation of afferent connections during development. Images Fig. 3 Fig. 4 PMID:8610132

31 CFR 25.404 - Non-separability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false Non-separability. 25.404 Section 25....404 Non-separability. (a) The Guaranty shall cease to be effective with respect to any Guaranteed Loan Amount or any Guaranteed Loan Portion Amount or any Guaranteed-Amount Equivalent to the extent that: (1...

31 CFR 25.404 - Non-separability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance: Treasury 1 2012-07-01 2012-07-01 false Non-separability. 25.404 Section 25....404 Non-separability. (a) The Guaranty shall cease to be effective with respect to any Guaranteed Loan Amount or any Guaranteed Loan Portion Amount or any Guaranteed-Amount Equivalent to the extent that: (1...

31 CFR 25.404 - Non-separability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance: Treasury 1 2013-07-01 2013-07-01 false Non-separability. 25.404 Section 25....404 Non-separability. (a) The Guaranty shall cease to be effective with respect to any Guaranteed Loan Amount or any Guaranteed Loan Portion Amount or any Guaranteed-Amount Equivalent to the extent that: (1...

31 CFR 25.404 - Non-separability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Non-separability. 25.404 Section 25....404 Non-separability. (a) The Guaranty shall cease to be effective with respect to any Guaranteed Loan Amount or any Guaranteed Loan Portion Amount or any Guaranteed-Amount Equivalent to the extent that: (1...

The atmospheric heat engine response to climate change

NASA Astrophysics Data System (ADS)

Pauluis, O. M.

2014-12-01

Moist convection is characterized by complex interactions between dynamics and thermodynamics. As air parcels within the atmosphere, they experience multiple thermodynamic transformations, such as compression and expansion, diabatic heating and cooling, condensation and mixing. These transformations correspond to those of a heat engine that produces kinetic energy while transporting energy from a warm source to a colder sink. This atmospheric heat engine is however directly affected by moist processes. First, falling precipitation acts as a break on the circulation by dissipating a significant amount of kinetic energy. Second, evaporation of unsaturated water and diffusion of water vapor are irrevesible processes that also reduce the amount of work that can be produced. An important challenge is to quantify the impacts that these two effects have on the generation of kinetic energy. Here, I will introduce a new technique - the Mean Air Flow As Lagragian Dynamics Approximation (MAFALDA) - that can be used to systematically analyze the thermodynamic behavior of complex atmospheric flows. This approach relies on sorting the upward mass transport in terms of the equivalent potential temperature of the air parcels to obtain an isentropic streamfunction. This streamfunction is then used to determine the thermodynamic evolution of air parcels as they move through the atmosphere. This approach is applied to analyze how convective systems would behave in a warmer climate. It is shown that an increase in atmospheric temperature lead to a significant increase of the amount of kinetic energy that is produced per unit of mass of air transported. At the same time, the total generation of kinetic energy is only slightly affected. Taken together, these findings imply that, in a warming atmosphere, the number of intense convective events will be reduced, while their intensity should increase. I will also discuss the new possibility of systematically studying the thermodynamic transformation in atmospheric models.

Minimizing the Amount of Nitromethane in Palladium Catalyzed Cross Coupling with Aryl Halides

PubMed Central

Walvoord, Ryan R.; Kozlowski, Marisa C.

2013-01-01

A method for the formation of arylnitromethanes is described that employs readily available aryl halides or triflates and small amounts of nitromethane in a dioxane solvent, thereby reducing the hazards associated with this reagent. Specifically, 2–10 equivalents (1–5% v/v) of nitromethane can be employed in comparison to prior work that used nitromethane as solvent (185 equivalents). The present transformation provides high yields at relatively low temperatures and tolerates an array of functionality, including heterocycles and substantial steric encumbrance. PMID:23895411

Snow water equivalent mapping in Norway

NASA Astrophysics Data System (ADS)

Tveito, O. E.; Udnæs, H.-C.; Engeset, R.; Førland, E. J.; Isaksen, K.; Mengistu, Z.

2003-04-01

In high latitude area snow covers the ground large parts of the year. Information about the water volume as snow is of major importance in many respects. Flood forecasters at NVE need it in order to assess possible flood risks. Hydropower producers need it to plan the most efficient production of the water in their reservoirs, traders to estimate the potential energy available for the market. Meteorologists on their side use the information as boundary conditions in weather forecasting models. The Norwegian meteorological institute has provided snow accumulation maps for Norway for more than 50 years. These maps are now produced twice a month in the winter season. They show the accumulated precipitation in the winter season from the day the permanent snow cover is established. They do however not take melting into account, and do therefore not give a good description of the actual snow amounts during and after periods with snowmelt. Due to an increased need for a direct measure of water volumes as snow cover, met.no and NVE initialized a joint project in order to establish maps of the actual snow cover expressed in water equivalents. The project utilizes recent developments in the use of GIS in spatial modeling. Daily precipitation and temperature are distributed in space by using objective spatial interpolation methods. The interpolation considers topographical and other geographical parameters as well as weather type information. A degree-day model is used at each modeling point to calculate snow-accumulation and snowmelt. The maps represent a spatial scale of 1x1 km2. The modeled snow reservoir is validated by snow pillow values as well traditional snow depth observations. Preliminary results show that the new snow modeling approach reproduces the snow water equivalent well. The spatial approach also opens for a wide use in the terms of areal analysis.

Smoke Invigoration Versus Inhibition of Clouds over the Amazon

NASA Technical Reports Server (NTRS)

Koren, Ilan; Martins, J. Vanderlei; Lorraine, A. Remer; Afargan, Hila

2008-01-01

The effect of anthropogenic aerosols on clouds is one of the most important and least understood aspects of human-induced climate change. Small changes in the amount of cloud coverage can produce a climate forcing equivalent in magnitude and opposite in sign to that caused by anthropogenic greenhouse gases, and changes in cloud height can shift the effect of clouds from cooling to warming. Focusing on the Amazon, we show a smooth transition between two opposing effects of aerosols on clouds: the microphysical and the radiative. We show how a feedback between the optical properties of aerosols and the cloud fraction can modify the aerosol forcing, changing the total radiative energy and redistributing it over the atmospheric column.

Forecasting petroleum discoveries in sparsely drilled areas: Nigeria and the North Sea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Attanasi, E.D.; Root, D.H.

1988-10-01

Decline function methods for projecting future discoveries generally capture the crowding effects of wildcat wells on the discovery rate. However, these methods do not accommodate easily situations where exploration areas and horizons are expanding. In this paper, a method is presented that uses a mapping algorithm for separating these often countervailing influences. The method is applied to Nigeria and the North Sea. For an amount of future drilling equivalent to past drilling (825 wildcat wells), future discoveries (in resources found) for Nigeria are expected to decline by 68% per well but still amount to 8.5 billion barrels of oil equivalentmore » (BOE). Similarly, for the total North Sea for an equivalent amount and mix among areas of past drilling (1322 wildcat wells), future discoveries are expected to amount to 17.9 billion BOE, whereas the average discovery rate per well is expected to decline by 71%.« less

The biochemical consequences of hypoxia.

PubMed Central

Alberti, K G

1977-01-01

The various phases of energy production have been described. These include glycolysis which is unique in its ability to produce ATP anaerobically, the tricarboxylic acid cycle with its major contribution to ATP production coming through the generation of NADH, and the cytochrome system at which reducing equivalents are converted to water, the released energy being incorporated into high-energy phosphates. The regulation of these pathways has been briefly described and the importance of the small amount of ATP generated anaerobically emphasized. The adaptation of muscle to periods of hypoxia through the presence of myoglobin, creatine phosphate and large amounts of glycogen is then discussed. The role of pH in limiting anaerobic glycolysis in muscle and the importance of the circulation in providing oxygen for exercising muscle are outlined. The effects of hypoxia on certain other tissues such as liver and brain have been detailed and finally methods for assessment of tissue hypoxia in man such as the measurement of the lactate:pyruvate ratio in blood are presented. PMID:198434

A Principal Component Analysis of the Diffuse Interstellar Bands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ensor, T.; Cami, J.; Bhatt, N. H.

2017-02-20

We present a principal component (PC) analysis of 23 line-of-sight parameters (including the strengths of 16 diffuse interstellar bands, DIBs) for a well-chosen sample of single-cloud sightlines representing a broad range of environmental conditions. Our analysis indicates that the majority (∼93%) of the variations in the measurements can be captured by only four parameters The main driver (i.e., the first PC) is the amount of DIB-producing material in the line of sight, a quantity that is extremely well traced by the equivalent width of the λ 5797 DIB. The second PC is the amount of UV radiation, which correlates wellmore » with the λ 5797/ λ 5780 DIB strength ratio. The remaining two PCs are more difficult to interpret, but are likely related to the properties of dust in the line of sight (e.g., the gas-to-dust ratio). With our PCA results, the DIBs can then be used to estimate these line-of-sight parameters.« less

In vitro callus culture of Heliotropium indicum Linn. for assessment of total phenolic and flavonoid content and antioxidant activity.

PubMed

Kumar, Muthusamy Senthil; Chaudhury, Shibani; Balachandran, Srinivasan

2014-12-01

The total phenolic and flavonoid content and percentage of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of callus and in vivo plant parts of Heliotropium indicum Linn. were estimated. Murashige and Skoog (MS) basal medium supplemented with α-naphthaleneacetic acid (NAA) 2.0 mg/l with benzyladenine (BA) 0.5 mg/l showed the highest amount of callus biomass (1.87 g/tube). The morphology of callus was significantly different according to the plant growth regulators and their concentrations used in the medium. The highest amount of total phenolic (21.70 mg gallic acid equivalent per gram (GAE/g)) and flavonoid (4.90 mg quercetin equivalent per gram (QE/g)) content and the maximum percentage (77.78 %) of radical scavenging activity were estimated in the extract of inflorescence. The synergistic effect of NAA (2.0 mg/l) and BA (0.5 mg/l) enhances the synthesis of total phenolic (9.20 mg GAE/g) and flavonoid (1.25 mg QE/g) content in the callus tissue. The callus produced by the same concentration shows 45.24 % of free radical scavenging activity. While comparing the various concentrations of NAA with 2,4-dichlorophenoxyacetic acid (2,4-D) for the production of callus biomass, total phenolic and flavonoid content and free radical scavenging activity, all the concentrations of NAA were found to be superior than those of 2,4-D.

Co-digestion of concentrated black water and kitchen refuse in an accumulation system within the DESAR (decentralized sanitation and reuse) concept.

PubMed

Kujawa-Roeleveld, K; Elmitwalli, T; Gaillard, A; van Leeuwen, M; Zeeman, G

2003-01-01

Co-digestion of concentrated black water and kitchen refuse within the DESAR concept was the objective of this pilot research. The digestion took place in two, non-mixed accumulation reactors (AC1 and AC2) inoculated with digested primary sludge from a WWTP at a temperature of 20 degrees C for a period of around 150 days. Reactor AC1 was fed with a mixture of faeces, urine and kitchen refuse in the equivalent amount that one individual generates per day. The AC2 was fed with a mixture of faeces and kitchen refuse in the equivalent amount that two individuals produce per day. Some contribution of urine to AC2 was not to be avoided. Detailed characterisation of waste(water) was performed. The performance of the stratified reactor was followed by monitoring the reactor content for several reactors' heights as well as being based on the biogas production. In general the system exposed good process stability. The methanisation of 34 and 61% was obtained for AC1 and AC2 respectively. The biogas yield was 26.5 and 50.8 L/p/d for the respective reactors. Proper choice of inoculum as well as good buffering capacity did not lead to accumulation of VFA and an inhibitive effect due to relatively high ammonium concentration. The chosen process is a promising technology showing good process stability especially for high strength influent.

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2012 CFR

2012-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2010 CFR

2010-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2014 CFR

2014-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2013 CFR

2013-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

24 CFR 880.602 - Replacement reserve.

Code of Federal Regulations, 2011 CFR

2011-04-01

... equivalent to .006 of the cost of total structures, including main buildings, accessory buildings, garages... projects, an amount equivalent to at least .006 of the cost of total structures, including main buildings, accessory buildings, garages and other buildings, or any higher rate as required from time to time by: (A...

12 CFR 28.15 - Capital equivalency deposits.

Code of Federal Regulations, 2011 CFR

2011-01-01

... provided by the OCC, a foreign bank's capital equivalency deposits (CED) must consist of: (i) Investment... increase its CED above the minimum amount. For example, the OCC may require an increase if a Federal branch... arrangements. A foreign bank should require its depository bank to segregate its CED on the depository bank's...

12 CFR 28.15 - Capital equivalency deposits.

Code of Federal Regulations, 2012 CFR

2012-01-01

... provided by the OCC, a foreign bank's capital equivalency deposits (CED) must consist of: (i) Investment... increase its CED above the minimum amount. For example, the OCC may require an increase if a Federal branch... arrangements. A foreign bank should require its depository bank to segregate its CED on the depository bank's...

12 CFR 28.15 - Capital equivalency deposits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... provided by the OCC, a foreign bank's capital equivalency deposits (CED) must consist of: (i) Investment... increase its CED above the minimum amount. For example, the OCC may require an increase if a Federal branch... arrangements. A foreign bank should require its depository bank to segregate its CED on the depository bank's...

Assessment of Palm Press Fibre and Sawdust-Based Substrate Formulas for Efficient Carpophore Production of Lentinus squarrosulus (Mont.) Singer

PubMed Central

Chiejina, Nneka Virginia

2015-01-01

Development of efficient substrate formulas to improve yield and shorten production time is one of the prerequisites for commercial cultivation of edible mushrooms. In this study, fifteen substrate formulas consisting of varying ratios of palm press fibre (PPF), mahogany sawdust (MS), Gmelina sawdust, wheat bran (WB), and fixed proportions of 1% calcium carbonate (CaCO3) and 1% sucrose were assessed for efficient Lentinus squarrosulus production. Proximate compositions of mushrooms produced on the different substrate formulas were also analysed and compared. Substrate formulations containing 85% PPF, 13% WB, 1% CaCO3, and 1% sucrose were found to produce the highest carpophore yield, biological efficiency and size (206.5 g/kg, 61.96%, and 7.26 g, respectively). Days to production (first harvest) tended to increase with an increase in the amount of WB in the substrate formulas, except for PPF based formulas. The addition of WB in amounts equivalent to 8~18% in substrate formulas containing 80~90% PPF resulted in a decrease in the time to first harvest by an average of 17.7 days compared to 80~90% MS with similar treatment. Nutritional content of mushrooms was affected by the different substrate formulas. Protein content was high for mushrooms produced on formulas containing PPF as the basal substrate. Thus, formulas comprising PPF, WB, CaCO3, and sucrose at 85% : 13% : 1% : 1%) respectively could be explored as starter basal ingredients for efficient large scale production of L. squarrosulus. PMID:26839507

Design and experimental verification of an equivalent forebody to produce disturbances equivalent to those of a forebody with flowing inlets

NASA Technical Reports Server (NTRS)

Haynes, Davy A.; Miller, David S.; Klein, John R.; Louie, Check M.

1988-01-01

A method by which a simple equivalent faired body can be designed to replace a more complex body with flowing inlets has been demonstrated for supersonic flow. An analytically defined, geometrically simple faired inlet forebody has been designed using a linear potential code to generate flow perturbations equivalent to those produced by a much more complex forebody with inlets. An equivalent forebody wind-tunnel model was fabricated and a test was conducted in NASA Langley Research Center's Unitary Plan Wind Tunnel. The test Mach number range was 1.60 to 2.16 for angles of attack of -4 to 16 deg. Test results indicate that, for the purposes considered here, the equivalent forebody simulates the original flowfield disturbances to an acceptable degree of accuracy.

33 CFR Appendix B to Part 240 - Formulas for Determining Amount of Allowable Credit

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Ordinarily, the result will simply be a transfer of equivalent responsibilities between the Corps and non..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE GENERAL CREDIT FOR FLOOD CONTROL Pt. 240, App. B Appendix B to Part 240—Formulas for Determining Amount of Allowable Credit 1. General. The amount of credit that non...

33 CFR Appendix B to Part 240 - Formulas for Determining Amount of Allowable Credit

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Ordinarily, the result will simply be a transfer of equivalent responsibilities between the Corps and non..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE GENERAL CREDIT FOR FLOOD CONTROL Pt. 240, App. B Appendix B to Part 240—Formulas for Determining Amount of Allowable Credit 1. General. The amount of credit that non...

33 CFR Appendix B to Part 240 - Formulas for Determining Amount of Allowable Credit

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Ordinarily, the result will simply be a transfer of equivalent responsibilities between the Corps and non..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE GENERAL CREDIT FOR FLOOD CONTROL Pt. 240, App. B Appendix B to Part 240—Formulas for Determining Amount of Allowable Credit 1. General. The amount of credit that non...

33 CFR Appendix B to Part 240 - Formulas for Determining Amount of Allowable Credit

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Ordinarily, the result will simply be a transfer of equivalent responsibilities between the Corps and non..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE GENERAL CREDIT FOR FLOOD CONTROL Pt. 240, App. B Appendix B to Part 240—Formulas for Determining Amount of Allowable Credit 1. General. The amount of credit that non...

Revisiting the Darmois and Lichnerowicz junction conditions

NASA Astrophysics Data System (ADS)

Lake, Kayll

2017-10-01

What have become known as the "Darmois" and "Lichnerowicz" junction conditions are often stated to be equivalent, "essentially" equivalent, in a "sense" equivalent, and so on. One even sees not infrequent reference to the "Darmois-Lichnerowicz" conditions. Whereas the equivalence of these conditions is manifest in Gaussian-normal coordinates, a fact that has been known for close to a century, this equivalence does not extend to a loose definition of "admissible" coordinates (coordinates in which the metric and its first order derivatives are continuous). We show this here by way of a simple, but physically relevant, example. In general, a loose definition of the "Lichnerowicz" conditions gives additional restrictions, some of which simply amount to a convenient choice of gauge, and some of which amount to real physical restrictions, away from strict "admissible" coordinates. The situation was totally confused by a very influential, and now frequently misquoted, paper by Bonnor and Vickers, that erroneously claimed a proof of the equivalence of the "Darmois" and "Lichnerowicz" conditions within this loose definition of "admissible" coordinates. A correct proof, based on a strict definition of "admissible" coordinates, was given years previous by Israel. It is that proof, generally unrecognized, that we must refer to. Attention here is given to a clarification of the subject, and to the history of the subject, which, it turns out, is rather fascinating in itself.

Extraction of consensus protein patterns in regions containing non-proline cis peptide bonds and their functional assessment.

PubMed

Exarchos, Konstantinos P; Exarchos, Themis P; Rigas, Georgios; Papaloukas, Costas; Fotiadis, Dimitrios I

2011-05-10

In peptides and proteins, only a small percentile of peptide bonds adopts the cis configuration. Especially in the case of amide peptide bonds, the amount of cis conformations is quite limited thus hampering systematic studies, until recently. However, lately the emerging population of databases with more 3D structures of proteins has produced a considerable number of sequences containing non-proline cis formations (cis-nonPro). In our work, we extract regular expression-type patterns that are descriptive of regions surrounding the cis-nonPro formations. For this purpose, three types of pattern discovery are performed: i) exact pattern discovery, ii) pattern discovery using a chemical equivalency set, and iii) pattern discovery using a structural equivalency set. Afterwards, using each pattern as predicate, we search the Eukaryotic Linear Motif (ELM) resource to identify potential functional implications of regions with cis-nonPro peptide bonds. The patterns extracted from each type of pattern discovery are further employed, in order to formulate a pattern-based classifier, which is used to discriminate between cis-nonPro and trans-nonPro formations. In terms of functional implications, we observe a significant association of cis-nonPro peptide bonds towards ligand/binding functionalities. As for the pattern-based classification scheme, the highest results were obtained using the structural equivalency set, which yielded 70% accuracy, 77% sensitivity and 63% specificity.

Structure and mechanism of Cu- and Ni-substituted analogs of metallo-β-lactamase L1

PubMed Central

Hu, Zhenxin; Spadafora, Lauren J.; Hajdin, Christine E.; Bennett, Brian; Crowder, Michael W.

2009-01-01

In an effort to further probe metal binding to metallo-β-lactamase L1 (mβl L1), Cu- (Cu-L1) and Ni-substituted (Ni-L1) L1 were prepared and characterized by kinetic and spectroscopic studies. Cu-L1 bound 1.7 equivalents of Cu and small amounts of Zn(II) and Fe. The EPR spectrum of Cu-L1 exhibited two overlapping, axial signals, indicative of type 2 sites with distinct affinities for Cu(II). Both signals indicated multiple nitrogen ligands. Despite the expected proximity of the Cu(II) ions, however, only indirect evidence was found for spin-spin coupling. Cu-L1 exhibited higher kcat (96 s−1) and Km (224 μM) values, as compared to the values of dinuclear Zn(II)-containing L1, when nitrocefin was used as substrate. The Ni-L1 bound 1 equivalent of Ni and 0.3 equivalents of Zn(II). Ni-L1 was EPR-silent, suggesting that the oxidation state of nickel was +2; this suggestion was confirmed by 1H NMR spectra, which showed relatively sharp proton resonances. Stopped-flow kinetic studies showed that ZnNi-L1 stabilized significant amounts of the nitrocefin-derived intermediate and that the decay of intermediate is rate-limiting. 1H NMR spectra demonstrate that Ni(II) binds in the Zn2 site and that the ring-opened product coordinates Ni(II). Both Cu-L1 and ZnNi-L1 hydrolyze cephalosporins and carbapenems, but not penicillins, suggesting that the Zn2 site modulates substrate preference in mβ1 L1. These studies demonstrate that the Zn2 site in L1 is very flexible and can accommodate a number of different transition metal ions; this flexibility could possibly offer an organism that produces L1 an evolutionary advantage when challenged with β-lactam containing antibiotics. PMID:19228020

48 CFR 22.406-2 - Wages, fringe benefits, and overtime.

Code of Federal Regulations, 2010 CFR

2010-10-01

... exact cash amounts. In these cases, the hourly cash equivalent of the cost of these items shall be... the contractor's contributions, costs, or payment of cash equivalents for fringe benefits. Overtime... cash to the laborer or mechanic, or deducted from payments under the conditions set forth in 29 CFR 3.5...

76 FR 14032 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

... to the level of Medicare GME support received by other, non-children's hospitals. The legislation... equivalent residents in applicant children's hospitals' training programs to determine the amount of direct... data on the number of full-time equivalent residents a second time during the Federal fiscal year to...

30 CFR 218.41 - Assessments for failure to submit payment of same amount as Form MMS-2014 or bill document or to...

Code of Federal Regulations, 2010 CFR

2010-07-01

... same amount as Form MMS-2014 or bill document or to provide adequate information. 218.41 Section 218.41... Assessments for failure to submit payment of same amount as Form MMS-2014 or bill document or to provide... equivalent in amount to the total of individual line items on the associated Form MMS-2014, Form MMS-4430, or...

Family of new operations equivalency of neuro-fuzzy logic: optoelectronic realization and applications

NASA Astrophysics Data System (ADS)

Krasilenko, Vladimir G.; Nikolsky, Alexander I.; Yatskovsky, Victor I.; Ogorodnik, K. V.; Lischenko, Sergey

2002-07-01

The perspective of neural networks equivalental models (EM) base on vector-matrix procedure with basic operations of continuous and neuro-fuzzy logic (equivalence, absolute difference) are shown. Capacity on base EMs exceeded the amount of neurons in 2.5 times. This is larger than others neural networks paradigms. Amount neurons of this neural networks on base EMs may be 10 - 20 thousands. The base operations in EMs are normalized equivalency operations. The family of new operations equivalency and non-equivalency of neuro-fuzzy logic's, which we have elaborated on the based of such generalized operations of fuzzy-logic's as fuzzy negation, t-norm and s-norm are shown. Generalized rules of construction of new functions (operations) equivalency which uses relations of t-norm and s-norm to fuzzy negation are proposed. Among these elements the following should be underlined: (1) the element which fulfills the operation of limited difference; (2) the element which algebraic product (intensifier with controlled coefficient of transmission or multiplier of analog signals); (3) the element which fulfills a sample summarizing (uniting) of signals (including the one during normalizing). Synthesized structures which realize on the basic of these elements the whole spectrum of required operations: t-norm, s-norm and new operations equivalency are shown. These realization on the basic of new multifunctional optoelectronical BISPIN- devices (MOEBD) represent the circuit with constant and pulse optical input signals. They are modeling the operation of limited difference. These circuits realize frequency- dynamic neuron models and neural networks. Experimental results of these MOEBD and equivalency circuits, which fulfill the limited difference operation are discussed. For effective realization of neural networks on the basic of EMs as it is shown in report, picture elements are required as main nodes to implement element operations equivalence ('non-equivalence') of neuro-fuzzy logic's.

40 CFR 440.131 - General provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... permitted. (e) Groundwater infiltration provision. In the event a new source subject to a no discharge requirement can demonstrate that groundwater infiltration contributes a substantial amount of water to the... volume of water equivalent to the amount of groundwater infiltration. This discharge shall be subject to...

40 CFR 440.131 - General provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... permitted. (e) Groundwater infiltration provision. In the event a new source subject to a no discharge requirement can demonstrate that groundwater infiltration contributes a substantial amount of water to the... volume of water equivalent to the amount of groundwater infiltration. This discharge shall be subject to...

40 CFR 440.131 - General provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... permitted. (e) Groundwater infiltration provision. In the event a new source subject to a no discharge requirement can demonstrate that groundwater infiltration contributes a substantial amount of water to the... volume of water equivalent to the amount of groundwater infiltration. This discharge shall be subject to...

Effect of Prestraining of Recrystallization Temperature and Mechanical Properties of Commercial, Sintered, Wrought Molybdenum

NASA Technical Reports Server (NTRS)

Dike, Kenneth C; Long, Roger A

1953-01-01

Given three presumably identical lots of commercial, sintered, wrought molybdenum, the 1-hour recrystallization temperature of one lot remained above 2900 F by limiting the amount of effective restraining to 35 percent or less. Different recrystallization temperatures were obtained in various atmospheres, the highest in argon and the lowest in hydrogen. Metal thus fabricated and then stress-relieved possessed an ultimate tensile strength at room temperature within 10 percent of metal swaged 99 percent and also possessed equivalent ductility. At 1800 F, equivalent strength and ductility was obtained irrespective of the amount of swaging over the range of 10 to 99 percent. The amount of swaging greatly influenced the recrystallized grain size but the difference in grain size is not the major controlling factor which determines whether recrystallized molybdenum is ductile or brittle at room temperature.

Production of fumonisin B and C analogues by several fusarium species.

PubMed

Sewram, Vikash; Mshicileli, Ndumiso; Shephard, Gordon S; Vismer, Hester F; Rheeder, John P; Lee, Yin-Won; Leslie, John F; Marasas, Walter F O

2005-06-15

Six strains of Fusarium verticillioides, two of F. oxysporum, one strain of F. proliferatum, and a strain of an unidentified species were cultured on maize patties and rice and evaluated for their ability to simultaneously produce fumonisin B (FB) and C (FC) series analogues. Fumonisins were quantified by LC-MS-MS using positive ion electrospray ionization. FC1 provided characteristic fragment ions at m/z 690, 672, 654, 532, 514, and 338 corresponding to sequential loss of H2O and tricarboxylic acid moieties from the alkyl backbone, while FC3 and FC4 provided equivalent product ions 16 and 32 amu lower than the corresponding FC1 fragments, respectively. All isolates cultured on maize produced FC4. All isolates except for that of F. proliferatum also produced FC1, and three of the six strains of F. verticillioides produced FC3. All isolates except those of F. oxysporum produced detectable amounts of FB1, FB2, and FB3. Isolates that produced fumonisin B analogues produced at least 10 fold more of the B series analogues than they did of the C series analogues. The results confirm that at least some strains of F. oxysporum produce FC, but not FB, fumonisin analogues and also suggest that the genetics and physiological regulation of fumonisin production may be more complicated than previously envisaged since some strains of F. verticillioides and F. proliferatum as well as the strain of the unidentified species can simultaneously produce both FB and FC analogues.

Mango (Mangifera indica L.) Polyphenols Ameliorate Functional Constipation Symptoms in Humans Beyond Equivalent Amount of Fiber.

PubMed

P Venancio, Vinicius; Kim, Hyemee; A Sirven, Maritza; D Tekwe, Carmen; Honvoh, Gilson; T Talcott, Stephen; U Mertens-Talcott, Susanne

2018-05-07

Chronic constipation is a common gastrointestinal condition associated with intestinal inflammation and considerably impaired quality of life, affecting about 20% of Americans. Dietary fiber and laxatives aid in its treatment but do not fully address all symptoms, such as intestinal inflammation. Mango (Mangifera indica L.), a fiber- and polyphenol-rich fruit may provide anti-inflammatory effects in constipation. The 4-week consumption of mango fruit (300 g) or the equivalent amount of fiber was investigated in otherwise healthy human volunteers with chronic constipation that were randomly assigned to either group. Blood and fecal samples and digestive wellness questionnaires were collected at the beginning and end of the study. Results show that mango consumption significantly improved constipation status (stool frequency, consistency, and shape) and increased gastrin levels and fecal concentrations of short chain fatty acid (valeric acid) while lowering endotoxin and interleukin 6 concentrations in plasma. In this pilot study, the consumption of mango improves symptoms and associated biomarkers of constipation beyond an equivalent amount of fiber. Larger follow-up studies would need to investigate biomarkers for intestinal inflammation in more detail. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Comparison of sound reproduction using higher order loudspeakers and equivalent line arrays in free-field conditions.

PubMed

Poletti, Mark A; Betlehem, Terence; Abhayapala, Thushara D

2014-07-01

Higher order sound sources of Nth order can radiate sound with 2N + 1 orthogonal radiation patterns, which can be represented as phase modes or, equivalently, amplitude modes. This paper shows that each phase mode response produces a spiral wave front with a different spiral rate, and therefore a different direction of arrival of sound. Hence, for a given receiver position a higher order source is equivalent to a linear array of 2N + 1 monopole sources. This interpretation suggests performance similar to a circular array of higher order sources can be produced by an array of sources, each of which consists of a line array having monopoles at the apparent source locations of the corresponding phase modes. Simulations of higher order arrays and arrays of equivalent line sources are presented. It is shown that the interior fields produced by the two arrays are essentially the same, but that the exterior fields differ because the higher order sources produces different equivalent source locations for field positions outside the array. This work provides an explanation of the fact that an array of L Nth order sources can reproduce sound fields whose accuracy approaches the performance of (2N + 1)L monopoles.

Force-stabilizing synergies in motor tasks involving two actors

PubMed Central

Solnik, Stanislaw; Reschechtko, Sasha; Wu, Yen-Hsun; Zatsiorsky, Vladimir M.; Latash, Mark L.

2015-01-01

We investigated the ability of two persons to produce force-stabilizing synergies in accurate multi-finger force production tasks under visual feedback on the total force only. The subjects produced a time profile of total force (the sum of two hand forces in one-person tasks and the sum of two subject forces in two-person tasks) consisting of a ramp-up, steady-state, and ramp-down segments; the steady-state segment was interrupted in the middle by a quick force pulse. Analyses of the structure of inter-trial finger force variance, motor equivalence, anticipatory synergy adjustments (ASAs), and the unintentional drift of the sharing pattern were performed. The two-person performance was characterized by a dramatically higher amount of inter-trial variance that did not affect total force, higher finger force deviations that did not affect total force (motor equivalent deviations), shorter ASAs, and larger drift of the sharing pattern. The rate of sharing pattern drift correlated with the initial disparity between the forces produced by the two persons (or two hands). The drift accelerated following the quick force pulse. Our observations show that sensory information on the task-specific performance variable is sufficient for the organization of performance-stabilizing synergies. They suggest, however, that two actors are less likely to follow a single optimization criterion as compared to a single performer. The presence of ASAs in the two-person condition might reflect fidgeting by one or both of the subjects. We discuss the characteristics of the drift in the sharing pattern as reflections of different characteristic times of motion within the sub-spaces that affect and do not affect salient performance variables. PMID:26105756

Force-stabilizing synergies in motor tasks involving two actors.

PubMed

Solnik, Stanislaw; Reschechtko, Sasha; Wu, Yen-Hsun; Zatsiorsky, Vladimir M; Latash, Mark L

2015-10-01

We investigated the ability of two persons to produce force-stabilizing synergies in accurate multi-finger force production tasks under visual feedback on the total force only. The subjects produced a time profile of total force (the sum of two hand forces in one-person tasks and the sum of two subject forces in two-person tasks) consisting of a ramp-up, steady-state, and ramp-down segments; the steady-state segment was interrupted in the middle by a quick force pulse. Analyses of the structure of inter-trial finger force variance, motor equivalence, anticipatory synergy adjustments (ASAs), and the unintentional drift of the sharing pattern were performed. The two-person performance was characterized by a dramatically higher amount of inter-trial variance that did not affect total force, higher finger force deviations that did not affect total force (motor equivalent deviations), shorter ASAs, and larger drift of the sharing pattern. The rate of sharing pattern drift correlated with the initial disparity between the forces produced by the two persons (or two hands). The drift accelerated following the quick force pulse. Our observations show that sensory information on the task-specific performance variable is sufficient for the organization of performance-stabilizing synergies. They suggest, however, that two actors are less likely to follow a single optimization criterion as compared to a single performer. The presence of ASAs in the two-person condition might reflect fidgeting by one or both of the subjects. We discuss the characteristics of the drift in the sharing pattern as reflections of different characteristic times of motion within the subspaces that affect and do not affect salient performance variables.

Food and biomass potential of Prunus virginiana L. (chokecherry).

PubMed

Wang, Sunmin; Young, Lester; Faye, Amberly; Li, Bonnie; Clancy, Johanna; Bors, Bob; Reaney, Martin

2012-03-14

Prunus virginiana L. (chokecherry) fruit has potential to provide both food and energy and as annual yield of biomass and energy are much greater than annual crops such as canola and wheat. We determined chokecherry fruit weight fractions as well as pit and extracted seed oil concentrations and fatty acid composition. Gross energy for each of the fractions was determined, as were carbon and nitrogen content. Extrapolation of these data suggests that gross energy from pits alone over a 24-year period (890 GJ·ha(-1)) is equivalent to that from an entire canola/wheat rotation (850 GJ·ha(-1)). After maturity, pulp contributes an additional 1130 GJ·ha(-1) over 21 years from ~3.4 t·ha(-1)·year(-1) (dw), while wood from pruning could add another 60 GJ·ha(-1)·year(-1). Over this time period, chokecherry would produce 1.5-2.5 times the amount of oil produced by a canola/wheat rotation.

Mechanical properties of high-Si plate steel produced by the quenching and partitioning process

NASA Astrophysics Data System (ADS)

Hong, Seung Chan; Ahn, Jae Cheon; Nam, Sang Yong; Kim, Seog Ju; Yang, Hee Choon; Speer, John G.; Matlock, David K.

2007-12-01

The microstructures and mechanical properties of a high-Si (1.5 wt.%) steel produced by a novel process of quenching and partitioning (Q & P) were compared with those obtained using traditional heat treatments (i.e. austempering, intercritical annealing for dual phase, quench and tempering). Plate steel was included for exploration of the Q & P process in applications requiring strength and toughness (such as an API line pipe), where retained austenite may contribute to the overall toughness via the TRIP phenomenon at a crack top. The Q & P process is based on the partial transformation of austenite to martensite, followed by partitioning of carbon from martensite into austenite, which leads to an untypical microstructure. Retained austenite amounts up to 6 vol.% with a carbon content of up to 0.88 wt.% were achieved in 0.1% carbon steel using Q & P. Superior impact toughness at higher yield strength levels was found after Q & P compared to other traditional heat treatments with equivalent partitioning, austempering or tempering conditions.

Enzyme-resistant dextrins from potato starch for potential application in the beverage industry.

PubMed

Jochym, Kamila Kapusniak; Nebesny, Ewa

2017-09-15

The objective of this study was to produce soluble enzyme-resistant dextrins by microwave heating of potato starch acidified with small amounts of hydrochloric and citric acids and to characterize their properties. Twenty five samples were initially made and their solubility was determined. Three samples with the highest water solubility were selected for physico-chemical (dextrose equivalent, molecular weight distribution, pasting characteristics, retrogradation tendency), total dietary fiber (TDF) analysis, and stability tests. TDF content averaged 25%. Enzyme-resistant dextrins practically did not paste, even at 20% samples concentration, and were characterized by low retrogradation tendency. The stability of the samples, expressed as a percentage increase of initial and final reducing sugar content, at low pH and during heating at low pH averaged 10% and 15% of the initial value, respectively. The results indicate that microwave heating could be an effective and efficient method of producing highly-soluble, low-viscous, and enzyme-resistant potato starch dextrins. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simple proof of equivalence between adiabatic quantum computation and the circuit model.

PubMed

Mizel, Ari; Lidar, Daniel A; Mitchell, Morgan

2007-08-17

We prove the equivalence between adiabatic quantum computation and quantum computation in the circuit model. An explicit adiabatic computation procedure is given that generates a ground state from which the answer can be extracted. The amount of time needed is evaluated by computing the gap. We show that the procedure is computationally efficient.

7 CFR 51.1175 - Classification of defects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Definitions § 51.1175 Classification of defects. Table I Factor Injury Damage Serious damage Very serious... mushy condition Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of... 1/2 inch (12.7 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other...

7 CFR 51.784 - Classification of defects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Definitions § 51.784 Classification of defects. Table I Factor Injury Damage Serious damage Very serious.../4 inch (6.4 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/2 inch (12.7 mm) at stem end, or the equivalent of...

7 CFR 51.784 - Classification of defects.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Definitions § 51.784 Classification of defects. Table I Factor Injury Damage Serious damage Very serious.../4 inch (6.4 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/2 inch (12.7 mm) at stem end, or the equivalent of...

7 CFR 51.1175 - Classification of defects.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Definitions § 51.1175 Classification of defects. Table I Factor Injury Damage Serious damage Very serious... mushy condition Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of... 1/2 inch (12.7 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other...

Value of acid metabolic products in identification of certain corynebacteria.

PubMed Central

Reddy, C A; Kao, M

1978-01-01

Acid metabolic products of 23 strains of human and animal pathogenic corynebacteria, representing eight different species, were determined by gas chromatography. The results showed that the species examined were metabolically heterogeneous and could be presumptively identified based on the acid products produced. Corynebacterium equi did not produce any acids; C. renale produced lactate; and C. pyogenes produced major amounts of lactate, variable amounts of acetate, and minor amounts of succinate and pyruvate. C. kutscheri produced propionate and lactate as major products and pyruvate and oxalacetate as minor products. C. diphtheriae and C. pseudotuberculosis produced major amounts of propionate, acetate, and formate. In addition, C. pseudotuberculosis produced major amounts of pyruvate and minor amounts of succinate, lactate, and oxalacetate, whereas C. diphtheriae strains produced minor but variable amounts of lactate, succinate, fumarate, pyruvate, and oxalacetate. C. bovis produced aicd products similar to those of C. pyogenes but was readily distinguishable from the latter by the lack of hemolysis on blood agar, colony morphology, catalase reaction, and biochemicals. C. suis characteristically produced major amounts of ethanol, acetate, and formate and minor amounts of lactate and succinate but no propionate. PMID:96126

Methodological questions of creating tissue-equivalent phantoms

NASA Technical Reports Server (NTRS)

Kolodkin, A. V.; Popov, V. I.; Sychkov, M. A.; Nikl, I.; Erdei, M.; Eyben, O.

1974-01-01

On the basis of analysis and generalization of literature data, the composition of tissue equivalent plastic was justified, parameters of a standard man were determined, plaster and metal forms were created for casting dummies, and an experimental model was produced from tissue equivalent material.

7 CFR 1033.54 - Equivalent price.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Equivalent price. 1033.54 Section 1033.54 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Class Prices § 1033.54 Equivalent price. See § 1000.54. Producer Price Differential ...

7 CFR 1032.54 - Equivalent price.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Equivalent price. 1032.54 Section 1032.54 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Class Prices § 1032.54 Equivalent price. See § 1000.54. Producer Price Differential ...

7 CFR 1126.54 - Equivalent price.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Equivalent price. 1126.54 Section 1126.54 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Class Prices § 1126.54 Equivalent price. See § 1000.54. Producer Price Differential ...

12 CFR 220.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... are subject to contemporaneous exercise if: (1) The amount at risk is held in the account in cash, cash equivalents, or via an escrow receipt; and (2) The transaction is eligible for the cash account by... the customer in a margin account after debiting amounts transferred to the special memorandum account...

42 CFR 493.649 - Methodology for determining fee amount.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fringe benefit costs to support the required number of State inspectors, management and direct support... full time equivalent employee. Included in this cost are salary and fringe benefit costs, necessary... 42 Public Health 5 2010-10-01 2010-10-01 false Methodology for determining fee amount. 493.649...

Design and development of dry powder sulfobutylether-β-cyclodextrin complex for pulmonary delivery of fisetin.

PubMed

Mohtar, Noratiqah; Taylor, Kevin M G; Sheikh, Khalid; Somavarapu, Satyanarayana

2017-04-01

This study has investigated complexation of fisetin, a natural flavonoid, with three types of cyclodextrins to improve its solubility. Sulfobutylether-β-cyclodextrin (SBE-β-CD) showed the highest complexation efficiency while maintaining the in vitro antioxidant activity of fisetin. Addition of 20%v/v ethanol in water improved the amount of solubilized fisetin in the complex 5.9-fold compared to the system containing water alone. Spray drying of fisetin-SBE-β-CD complex solution in the presence of ethanol produced a dry powder with improved aerosolization properties when delivered from a dry powder inhaler, indicated by a 2-fold increase in the fine particle fraction (FPF) compared to the powder produced from the complex solution containing water alone. The pitted morphological surface of these particles suggested a more hollow internal structure, indicating a lighter and less dense powder. Incorporation of 20%w/w leucine improved the particle size distribution of the powder and further increased the FPF by 2.3-fold. This formulation also showed an EC 50 value equivalent to fisetin alone in the A549 cell line. In conclusion, an inhalable dry powder containing fisetin-SBE-β-CD complex was successfully engineered with an improved aqueous solubility of fisetin. The dry powder may be useful to deliver high amounts of fisetin to the deep lung region for therapeutic purposes. Copyright © 2016. Published by Elsevier B.V.

7 CFR 1124.54 - Equivalent price.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Equivalent price. 1124.54 Section 1124.54 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Class Prices § 1124.54 Equivalent price. See § 1000.54. Producer Price Differential ...

Processing Maple Syrup with a Vapor Compression Distiller: An Economic Analysis

Treesearch

Lawrence D. Garrett

1977-01-01

A test of vapor compression distillers for processing maple syrup revealed that: (1) vapor compression equipment tested evaporated 1 pound of water with .047 pounds of steam equivalent (electrical energy); open-pan evaporators of similar capacity required 1.5 pounds of steam equivalent (oil energy) to produce 1 pound of water; (2) vapor compression evaporation produced...

Hyperforin in St. John's wort drug interactions.

PubMed

Madabushi, Rajanikanth; Frank, Bruno; Drewelow, Bernd; Derendorf, Hartmut; Butterweck, Veronika

2006-03-01

Recently, interactions of herbal medicines with synthetic drugs came into focus of particular interest. In the past 3 years, more than 50 papers were published regarding interactions between St. John's wort (Hypericum perforatum L.; SJW) and prescription drugs. Co-medication with SJW resulted in decreased plasma concentrations of a number of drugs including amitriptyline, cyclosporine, digoxin, indinavir, irinotecan, warfarin, phenprocoumon, alprazolam, dextrometorphane, simvastatin, and oral contraceptives. Sufficient evidence from interaction studies and case reports indicate that SJW is a potent inducer of cytochrome P450 enzymes (particularly CYP3A4) and/or P-glycoprotein. Recent studies could show that the degree of enzyme induction by SJW correlates strongly with the amount of hyperforin found in the product. Products that do not contain substantial amounts of hyperforin (<1%) have not been shown to produce clinically relevant enzyme induction. On the other hand, some evidence suggests that hyperforin may also contribute to the antidepressant activity of SJW. However, clinical studies using SJW preparations with a low hyperforin amount (<1%) clearly demonstrated the superiority of this plant extract over placebo and its equivalence to imipramine and fluoxetine in the treatment of mild to moderate forms of depression. In the present paper clinical significant SJW interactions are critically evaluated against the background of hyperforin.

Deriving Snow-Cover Depletion Curves for Different Spatial Scales from Remote Sensing and Snow Telemetry Data

NASA Technical Reports Server (NTRS)

Fassnacht, Steven R.; Sexstone, Graham A.; Kashipazha, Amir H.; Lopez-Moreno, Juan Ignacio; Jasinski, Michael F.; Kampf, Stephanie K.; Von Thaden, Benjamin C.

2015-01-01

During the melting of a snowpack, snow water equivalent (SWE) can be correlated to snow-covered area (SCA) once snow-free areas appear, which is when SCA begins to decrease below 100%. This amount of SWE is called the threshold SWE. Daily SWE data from snow telemetry stations were related to SCA derived from moderate-resolution imaging spectro radiometer images to produce snow-cover depletion curves. The snow depletion curves were created for an 80,000 sq km domain across southern Wyoming and northern Colorado encompassing 54 snow telemetry stations. Eight yearly snow depletion curves were compared, and it is shown that the slope of each is a function of the amount of snow received. Snow-cover depletion curves were also derived for all the individual stations, for which the threshold SWE could be estimated from peak SWE and the topography around each station. A stations peak SWE was much more important than the main topographic variables that included location, elevation, slope, and modelled clear sky solar radiation. The threshold SWE mostly illustrated inter-annual consistency.

30 CFR 62.101 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 85 dBA, or equivalently a dose of 50%, integrating all sound levels from 80 dBA to at least 130 dBA... Protection Level. A TWA8 of 105 dBA, or equivalently, a dose of 800% of that permitted by the standard, integrating all sound levels from 90 dBA to at least 140 dBA. Exchange rate. The amount of increase in sound...

30 CFR 62.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 85 dBA, or equivalently a dose of 50%, integrating all sound levels from 80 dBA to at least 130 dBA... Protection Level. A TWA8 of 105 dBA, or equivalently, a dose of 800% of that permitted by the standard, integrating all sound levels from 90 dBA to at least 140 dBA. Exchange rate. The amount of increase in sound...

10 CFR Appendix A to Part 40 - Criteria Relating to the Operation of Uranium Mills and the Disposition of Tailings or Wastes...

Code of Federal Regulations, 2014 CFR

2014-01-01

... associated with the sites, which is equivalent to, to the extent practicable, or more stringent than the... this appendix, the Commission will consider “practicable” and “reasonably achievable” as equivalent... formation, group of formations, or part of a formation capable of yielding a significant amount of ground...

A model of distributed phase aberration for deblurring phase estimated from scattering.

PubMed

Tillett, Jason C; Astheimer, Jeffrey P; Waag, Robert C

2010-01-01

Correction of aberration in ultrasound imaging uses the response of a point reflector or its equivalent to characterize the aberration. Because a point reflector is usually unavailable, its equivalent is obtained using statistical methods, such as processing reflections from multiple focal regions in a random medium. However, the validity of methods that use reflections from multiple points is limited to isoplanatic patches for which the aberration is essentially the same. In this study, aberration is modeled by an offset phase screen to relax the isoplanatic restriction. Methods are developed to determine the depth and phase of the screen and to use the model for compensation of aberration as the beam is steered. Use of the model to enhance the performance of the noted statistical estimation procedure is also described. Experimental results obtained with tissue-mimicking phantoms that implement different models and produce different amounts of aberration are presented to show the efficacy of these methods. The improvement in b-scan resolution realized with the model is illustrated. The results show that the isoplanatic patch assumption for estimation of aberration can be relaxed and that propagation-path characteristics and aberration estimation are closely related.

Experimental investigation of syngas flame stability using a multi-tube fuel injector in a high pressure combustor

NASA Astrophysics Data System (ADS)

Maldonado, Sergio Elzar

Over 92% of the coal consumed by power plants is used to generate electricity in the United States (U.S.). The U.S. has the world's largest recoverable reserves of coal, it is estimated that reserves of coal will last more than 200 years based in current production and demand levels. Integrated Gasification Combined Cycle (IGCC) power plants aim to reduce the amount of pollutants by gasifying coal and producing synthesis gas. Synthesis gas, also known as syngas, is a product of coal gasification and can be used in gas turbines for energy production. Syngas is primarily a mixture of hydrogen and carbon monoxide and is produced by gasifying a solid fuel feedstock such as coal or biomass. The objective of the thesis is to create a flame stability map by performing various experiments using high-content hydrogen fuels with varying compositions of hydrogen representing different coal feedstocks. The experiments shown in this thesis were performed using the High-Pressure Combustion facility in the Center for Space Exploration Technology Research (CSETR) at the University of Texas at El Paso (UTEP). The combustor was fitted with a novel Multi-Tube fuel Injector (MTI) designed to improve flame stability. This thesis presents the results of testing of syngas fuels with compositions of 20, 30, and 40% hydrogen concentrations in mixtures with carbon monoxide. Tests were completed for lean conditions ranging from equivalence ratios between 0.6 and 0.9. The experimental results showed that at an equivalence ratio of 0.6, a stable flame was not achieved for any of the fuel mixtures tested. It was also observed that the stability region of the syngas flame increased as equivalence ratio and the hydrogen concentration in syngas fuel increases with the 40% hydrogen-carbon monoxide mixture demonstrating the greatest stability region. Design improvements to the MTI are also discussed as part of the future work on this topic.

Green synthesis of chalcones derivatives as intermediate of flavones and their antibacterial activities

NASA Astrophysics Data System (ADS)

VH, Elfi Susanti; Matsjeh, Sabirin; Wahyuningsih, Tutik Dwi; Mustofa, Redjeki, Tri

2016-02-01

Four chalcones derivatives have been synthesized from 3,4-dimethoxybenzaldehyde and acetophenone derivatives (2-hydroxy acetophenone, 2,4-dihydroxy acetophenone, 2,5-dihydroxy acetophenone and 2,6-dihydroxy acetophenone). The synthesis of these chalcones were conducted by Claisen-Schmidt condensation using grinding techniques at room temperature in the absence of solvents. The chalcones were prepared by grinding together equivalent amount of the approriate hydroxyacetophenone and 3,4-dimethoxybenzaldehyde in the presence of solid sodium hydroxide. Grinding techniques for synthesis of the chalcones derivatives is simple, efficient and environmentally benign compared to conventional methods. Then, the four chalcones derivatives undergo cyclization reactions to produce four flavones after reacted with iodine. The synthesized compounds were characterized by spectrometry (IR, 1H-NMR, 13C-NMR and MS).

SpcAudace: Spectroscopic processing and analysis package of Audela software

NASA Astrophysics Data System (ADS)

Mauclaire, Benjamin

2017-11-01

SpcAudace processes long slit spectra with automated pipelines and performs astrophysical analysis of the latter data. These powerful pipelines do all the required steps in one pass: standard preprocessing, masking of bad pixels, geometric corrections, registration, optimized spectrum extraction, wavelength calibration and instrumental response computation and correction. Both high and low resolution long slit spectra are managed for stellar and non-stellar targets. Many types of publication-quality figures can be easily produced: pdf and png plots or annotated time series plots. Astrophysical quantities can be derived from individual or large amount of spectra with advanced functions: from line profile characteristics to equivalent width and periodogram. More than 300 documented functions are available and can be used into TCL scripts for automation. SpcAudace is based on Audela open source software.

Teaching brain-behavior relations economically with stimulus equivalence technology.

PubMed

Fienup, Daniel M; Covey, Daniel P; Critchfield, Thomas S

2010-03-01

Instructional interventions based on stimulus equivalence provide learners with the opportunity to acquire skills that are not directly taught, thereby improving the efficiency of instructional efforts. The present report describes a study in which equivalence-based instruction was used to teach college students facts regarding brain anatomy and function. The instruction involved creating two classes of stimuli that students understood as being related. Because the two classes shared a common member, they spontaneously merged, thereby increasing the yield of emergent relations. Overall, students mastered more than twice as many facts as were explicitly taught, thus demonstrating the potential of equivalence-based instruction to reduce the amount of student investment that is required to master advanced academic topics.

Robust estimation of event-related potentials via particle filter.

PubMed

Fukami, Tadanori; Watanabe, Jun; Ishikawa, Fumito

2016-03-01

In clinical examinations and brain-computer interface (BCI) research, a short electroencephalogram (EEG) measurement time is ideal. The use of event-related potentials (ERPs) relies on both estimation accuracy and processing time. We tested a particle filter that uses a large number of particles to construct a probability distribution. We constructed a simple model for recording EEG comprising three components: ERPs approximated via a trend model, background waves constructed via an autoregressive model, and noise. We evaluated the performance of the particle filter based on mean squared error (MSE), P300 peak amplitude, and latency. We then compared our filter with the Kalman filter and a conventional simple averaging method. To confirm the efficacy of the filter, we used it to estimate ERP elicited by a P300 BCI speller. A 400-particle filter produced the best MSE. We found that the merit of the filter increased when the original waveform already had a low signal-to-noise ratio (SNR) (i.e., the power ratio between ERP and background EEG). We calculated the amount of averaging necessary after applying a particle filter that produced a result equivalent to that associated with conventional averaging, and determined that the particle filter yielded a maximum 42.8% reduction in measurement time. The particle filter performed better than both the Kalman filter and conventional averaging for a low SNR in terms of both MSE and P300 peak amplitude and latency. For EEG data produced by the P300 speller, we were able to use our filter to obtain ERP waveforms that were stable compared with averages produced by a conventional averaging method, irrespective of the amount of averaging. We confirmed that particle filters are efficacious in reducing the measurement time required during simulations with a low SNR. Additionally, particle filters can perform robust ERP estimation for EEG data produced via a P300 speller. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Shielding implications for secondary neutrons and photons produced within the patient during IMPT.

PubMed

DeMarco, J; Kupelian, P; Santhanam, A; Low, D

2013-07-01

Intensity modulated proton therapy (IMPT) uses a combination of computer controlled spot scanning and spot-weight optimized planning to irradiate the tumor volume uniformly. In contrast to passive scattering systems, secondary neutrons and photons produced from inelastic proton interactions within the patient represent the major source of emitted radiation during IMPT delivery. Various published studies evaluated the shielding considerations for passive scattering systems but did not directly address secondary neutron production from IMPT and the ambient dose equivalent on surrounding occupational and nonoccupational work areas. Thus, the purpose of this study was to utilize Monte Carlo simulations to evaluate the energy and angular distributions of secondary neutrons and photons following inelastic proton interactions within a tissue-equivalent phantom for incident proton spot energies between 70 and 250 MeV. Monte Carlo simulation methods were used to calculate the ambient dose equivalent of secondary neutrons and photons produced from inelastic proton interactions in a tissue-equivalent phantom. The angular distribution of emitted neutrons and photons were scored as a function of incident proton energy throughout a spherical annulus at 1, 2, 3, 4, and 5 m from the phantom center. Appropriate dose equivalent conversion factors were applied to estimate the total ambient dose equivalent from secondary neutrons and photons. A reference distance of 1 m from the center of the patient was used to evaluate the mean energy distribution of secondary neutrons and photons and the resulting ambient dose equivalent. For an incident proton spot energy of 250 MeV, the total ambient dose equivalent (3.6 × 10(-3) mSv per proton Gy) was greatest along the direction of the incident proton spot (0°-10°) with a mean secondary neutron energy of 71.3 MeV. The dose equivalent decreased by a factor of 5 in the backward direction (170°-180°) with a mean energy of 4.4 MeV. An 8 × 8 × 8 cm(3) volumetric spot distribution (5 mm FWHM spot size, 4 mm spot spacing) optimized to produce a uniform dose distribution results in an ambient dose equivalent of 4.5 × 10(-2) mSv per proton Gy in the forward direction. This work evaluated the secondary neutron and photon emission due to monoenergetic proton spots between 70 and 250 MeV, incident on a tissue equivalent phantom. Example calculations were performed to estimate concrete shield thickness based upon appropriate workload and shielding design assumptions. Although lower than traditional passive scattered proton therapy systems, the ambient dose equivalent from secondary neutrons produced by the patient during IMPT can be significant relative to occupational and nonoccupational workers in the vicinity of the treatment vault. This work demonstrates that Monte Carlo simulations are useful as an initial planning tool for studying the impact of the treatment room and maze design on surrounding occupational and nonoccupational work areas.

Fresh, frozen, or ambient food equivalents and their impact on food waste generation in Dutch households.

PubMed

Janssen, Anke M; Nijenhuis-de Vries, Mariska A; Boer, Eric P J; Kremer, Stefanie

2017-09-01

In Europe, it is estimated that more than 50% of total food waste - of which most is avoidable - is generated at household level. Little attention has been paid to the impact on food waste generation of consuming food products that differ in their method of food preservation. This exploratory study surveyed product-specific possible impacts of different methods of food preservation on food waste generation in Dutch households. To this end, a food waste index was calculated to enable relative comparisons of the amounts of food waste from the same type of foods with different preservation methods on an annual basis. The results show that, for the majority of frozen food equivalents, smaller amounts were wasted compared to their fresh or ambient equivalents. The waste index (WI) proposed in the current paper confirms the hypothesis that it may be possible to reduce the amount of food waste at household level by encouraging Dutch consumers to use (certain) foods more frequently in a frozen form (instead of fresh or ambient). However, before this approach can be scaled to population level, a more detailed understanding of the underlying behavioural causes with regard to food provisioning and handling and possible interactions is required. Copyright © 2017. Published by Elsevier Ltd.

Criticality Safety Controls for 55-Gallon Drums with a Mass Limit of 200 grams Pu-239

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, P

The following 200-gram Pu drum criticality safety controls are applicable to RHWM drum storage operations: (1) Mass (Fissile/Pu) - each 55-gallon drum or its equivalent shall be limited to 200 gram Pu or Pu equivalent; (2) Moderation - Hydrogen materials with a hydrogen density greater than that (0.133 g H/cc) of polyethylene and paraffin are not allowed and hydrogen materials with a hydrogen density no greater than that of polyethylene and paraffin are allowed with unlimited amounts; (3) Interaction - a spacing of 30-inches (76 cm) is required between arrays and 200-gram Pu drums shall be placed in arrays formore » 200-gram Pu drums only (no mingling of 200-gram Pu drums with other drums not meeting the drum controls associated with the 200-gram limit); (4) Reflection - no beryllium and carbon/graphite (other than the 50-gram waiver amount) is allowed, (note that Nat-U exceeding the waiver amount is allowed when its U-235 content is included in the fissile mass limit of 200 grams); and (5) Geometry - drum geometry, only 55-gallon drum or its equivalent shall be used and array geometry, 55-gallon drums are allowed for 2-high stacking. Steel waste boxes may be stacked 3-high if constraint.« less

The Influence of Auditory Acuity on Acoustic Variability and the Use of Motor Equivalence during Adaptation to a Perturbation

ERIC Educational Resources Information Center

Brunner, Jana; Ghosh, Satrajit; Hoole, Philip; Matthies, Melanie; Tiede, Mark; Perkell, Joseph

2011-01-01

Purpose: The aim of this study was to relate speakers' auditory acuity for the sibilant contrast, their use of motor equivalent trading relationships in producing the sibilant /[esh]/, and their produced acoustic distance between the sibilants /s/ and /[esh]/. Specifically, the study tested the hypotheses that during adaptation to a perturbation…

Distribution of uranium in the Bisbee district, Cochise County, Arizona

USGS Publications Warehouse

Wallace, Stewart R.

1956-01-01

The Bisbee district has been an important source of copper for many years, and substantial amounts of lead and zinc ore and minor amounts of manganese ore have been mined during certain periods. The copper deposits occur both as low-grade disseminated ore in the Sacramento Hill stock and as massive sulfide (and secondary oxide and carbonate) replacement bodies in Paleozoic limestones that are intruded by the stock and related igneous bodies. The lead-zinc production has come almost entirely from limestone replacement bodies. The disseminated ore exhibits no anomalous radioactivity, and samples from the Lavender pit contain from 0.002 to less than 0.001 percent equivalent uranium. The limestone replacement ores are distinctly radioactive and stoping areas can be readily distinguished from from unmineralized ground on the basis of radioactivity alone. The equivalent uranium content of the copper replacement ores ranges from 0.002 to 0.014 percent and averages about 0.005 percent; the lead-zinc replacement ores average more than 0.007 percent equivalent uranium. Most of the uranium in the copper ores of the district is retained in the smelter slag of a residual concentrate; the slag contains about 0.009 percent equivalent uranium. Uranium carried off each day by acid mine drainage is roughly equal to 1 percent of that being added to the slag dump. Although the total amount of uranium in the district is large, no minable concentrations of ore-grade material are known; samples of relatively high-grade material represent only small fractions of tons at any one locality.

Angles between orthogonal spd bond orbitals with maximum strength.

PubMed

Pauling, L

1976-05-01

An equation is derived for values of bond angles for two equivalent best spd hybrid bond orbitals with given amounts of s, p, and d character, and is applied in the discussion of structures of transargononic compounds, including the xenon and halogen fluorides. Bond orbitals with a rather small amount of d character tend to lie at angles 90 degrees and 180 degrees , and those with a larger amount, at somewhat smaller angles.

Food Patterns Equivalent Intakes from Food: Mean Amounts Consumed per Individual, What We Eat in America, NHANES 2013-14; Tables 1-4

USDA-ARS?s Scientific Manuscript database

The mean intakes of the 37 Food Patterns (FP), per day, per individual, were estimated. Day 1 dietary intake data of the 8,066 individuals, ages 2 years and over, in What We Eat in America, National Health and Nutrition Examination Survey 2013-14 and the Food Patterns Equivalents Database (FPED) 20...

The Importance of Topography in Modeling the Climates of Potentially Habitable Worlds

NASA Astrophysics Data System (ADS)

Sohl, L. E.; Chandler, M. A.; Way, M.; Jonas, J.

2017-12-01

The surface features of distant potentially habitable worlds are unknown and likely to remain so for the foreseeable future. As a result, 3-D general circulation model (GCM) simulations of the climates of these worlds commonly utilize an aquaplanet configuration (no emergent land). We highlight here the differences in simulated climates that are produced when using realistic, reconstructed, or idealized continental distributions. Paleo-Earth scenarios as analogues of habitable exoplanets with emergent land exist back to 2 Gyr. There is high confidence in continental reconstructions back to 300 Myr, with moderate confidence reconstructions dating to at least 1 Gyr. A range of habitable states exists throughout the last two billion years of Earth history, including periods that are representative of both inner and outer edge environments, i.e., Snowball Earth and the Cretaceous Greenhouse. Using reconstructed land/ocean distributions with the GCM permits us to test hypotheses based on conceptual models (does a supercontinent at tropical latitudes encourage global cooling via albedo feedbacks?) as well as explore far-field climate teleconnections that may explain enhanced habitability (does the closing of an equatorial seaway drive increased heating in polar regions?). Paleo-Venus simulations, using current topography and a slow rotation rate, have shown that large land fraction in the tropics combined with modest amounts of water actually limits the amount of planetary warming to habitable levels, moreso than aquaplanets, given the equivalent solar flux - thus showing the inner edge of the HZ to be more transitional than previously described. For distant exoplanets or paleo-Earth prior to 2 Gyr, idealized continents or modern Earth topography help illustrate the range of possible habitable states for a given case. With idealized continents, varying the land fraction and location produces as much as a 20˚C difference in global MAT for otherwise identical simulations (same solar/GHG forcings). Synchronously rotating exoplanets modeled with modern Earth topography show how land barriers to zonal water/heat transports result in a global MAT considerably colder than the equivalent aquaplanet scenario, and ice and snow cover can increase by roughly a factor of two when land is beneath the substellar point.

Phytoavailability and extractability of potassium, magnesium and manganese in calcareous soil amended with olive oil wastewater.

PubMed

Gallardo-Lara, F; Azcón, M; Polo, A

2000-09-01

Land disposal of olive oil wastewater using it as a soil amendment requires a knowledge of the effects that its application may produce on the status of the mineral nutrients in the plant-soil system. A pot experiment using calcareous soil was performed in a growth chamber to examine the effects of olive oil wastewater on the availability and postharvest soil extractability of K, Mg and Mn. The experiment included 6 treatments: two rates of olive oil wastewater, two mineral fertilizer treatments containing K (which supplied K in amounts equivalent to the K supplied by the olive oil wastewater treatments), a K-free mineral fertilizer treatment, and a control. The pots were sown with ryegrass as the test plant, harvesting 3 times at intervals of one month. Olive oil wastewater has demonstrated a considerable capacity for supplying K that can be assimilated by the plant, tending in fact to surpass the mineral potassium fertilizer tested. The application of olive oil wastewater tends to reduce the concentration of Mg in the plant, similarly to the effect of adding mineral potassium fertilizer. An enhancement of Mn availability takes place in the soil amended with olive oil wastewater, which on occasion has produced Mn concentrations in plant that could be considered phytotoxic or at least excessive. After harvesting, we observed an increase in the amount of exchangeable K in soil with added industrial wastewater. However, these increases are lower than those in soil treated with mineral potassium fertilizer. The levels of exchangeable, carbonate-bound, organic-bound and residual Mg in soil were higher in treatments incorporating olive oil wastewater than in those with added mineral K, with the opposite tendency occurring in the amount of Fe-Mn oxides-bound Mg in soil. Treatments based on olive oil wastewater, especially in high doses, increased the amount of exchangeable and carbonate-bound Mn in soil, in comparison with treatments adding mineral fertilizers with or without K. In contrast, the addition of industrial wastewater caused a drop in the amount of Fe-Mn oxides-bound and organic-bound Mn in soil.

Calculated organ doses using Monte Carlo simulations in a reference male phantom undergoing HDR brachytherapy applied to localized prostate carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Candela-Juan, Cristian; Perez-Calatayud, Jose; Ballester, Facundo

Purpose: The aim of this study was to obtain equivalent doses in radiosensitive organs (aside from the bladder and rectum) when applying high-dose-rate (HDR) brachytherapy to a localized prostate carcinoma using {sup 60}Co or {sup 192}Ir sources. These data are compared with results in a water phantom and with expected values in an infinite water medium. A comparison with reported values from proton therapy and intensity-modulated radiation therapy (IMRT) is also provided. Methods: Monte Carlo simulations in Geant4 were performed using a voxelized phantom described in International Commission on Radiological Protection (ICRP) Publication 110, which reproduces masses and shapes frommore » an adult reference man defined in ICRP Publication 89. Point sources of {sup 60}Co or {sup 192}Ir with photon energy spectra corresponding to those exiting their capsules were placed in the center of the prostate, and equivalent doses per clinical absorbed dose in this target organ were obtained in several radiosensitive organs. Values were corrected to account for clinical circumstances with the source located at various positions with differing dwell times throughout the prostate. This was repeated for a homogeneous water phantom. Results: For the nearest organs considered (bladder, rectum, testes, small intestine, and colon), equivalent doses given by {sup 60}Co source were smaller (8%-19%) than from {sup 192}Ir. However, as the distance increases, the more penetrating gamma rays produced by {sup 60}Co deliver higher organ equivalent doses. The overall result is that effective dose per clinical absorbed dose from a {sup 60}Co source (11.1 mSv/Gy) is lower than from a {sup 192}Ir source (13.2 mSv/Gy). On the other hand, equivalent doses were the same in the tissue and the homogeneous water phantom for those soft tissues closer to the prostate than about 30 cm. As the distance increased, the differences of photoelectric effect in water and soft tissue, and appearance of other materials such as air, bone, or lungs, produced variations between both phantoms which were at most 35% in the considered organ equivalent doses. Finally, effective doses per clinical absorbed dose from IMRT and proton therapy were comparable to those from both brachytherapy sources, with brachytherapy being advantageous over external beam radiation therapy for the furthest organs. Conclusions: A database of organ equivalent doses when applying HDR brachytherapy to the prostate with either {sup 60}Co or {sup 192}Ir is provided. According to physical considerations, {sup 192}Ir is dosimetrically advantageous over {sup 60}Co sources at large distances, but not in the closest organs. Damage to distant healthy organs per clinical absorbed dose is lower with brachytherapy than with IMRT or protons, although the overall effective dose per Gy given to the prostate seems very similar. Given that there are several possible fractionation schemes, which result in different total amounts of therapeutic absorbed dose, advantage of a radiation treatment (according to equivalent dose to healthy organs) is treatment and facility dependent.« less

Computer simulations and models for the performance characteristics of spectrally equivalent X-ray beams in medical diagnostic radiology

PubMed Central

Okunade, Akintunde A.

2007-01-01

In order to achieve uniformity in radiological imaging, it is recommended that the concept of equivalence in shape (quality) and size (quantity) of clinical Xray beams should be used for carrying out the comparative evaluation of image and patient dose. When used under the same irradiation geometry, X-ray beams that are strictly or relatively equivalent in terms of shape and size will produce identical or relatively identical image quality and patient dose. Simple mathematical models and software program EQSPECT.FOR were developed for the comparative evaluation of the performance characteristics in terms of contrast (C), contrast to noise ratio (CNR) and figure-of-merit (FOM = CNR2/DOSE) for spectrally equivalent beams transmitted through filter materials referred to as conventional and k-edged. At the same value of operating potential (kVp), results show that spectrally equivalent beam transmitted through conventional filter with higher atomic number (Z-value) in comparison with that transmitted through conventional filter with lower Z-value resulted in the same value of C and FOM. However, in comparison with the spectrally equivalent beam transmitted through filter of lower Z-value, the beam through filter of higher Z-value produced higher value of CNR and DOSE at equal tube loading (mAs) and kVp. Under the condition of equivalence of spectrum, at scaled (or reduced) tube loading and same kVp, filter materials of higher Z-value can produce the same values of C, CNR, DOSE and FOM as filter materials of lower Z-value. Unlike the case of comparison of spectrally equivalent beam transmitted through one conventional filter and that through another conventional filter, it is not possible to derive simple mathematical formulations for the relative performance of spectrally equivalent beam transmitted through a given conventional filter material and that through kedge filter material. PMID:21224928

77 FR 3202 - Dividend Equivalents From Sources Within the United States

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

... (1) gross-up amounts paid by a short party in satisfaction of the long party's tax liability with... value of the collateral moves in tandem with the contract. This concern is less applicable when the value of the underlying securities posted as collateral is a small portion of the total amount of cash...

77 FR 47131 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

... exercised or assigned, the writer of the option is obligated to purchase the requisite amount of the asset... put option segregates an amount of cash or cash equivalents sufficient to cover the purchase price of... when the seller executes a closing purchase transaction with respect to such option. All put options...

Standardized Magnitude Estimations of Frequency and Amount for Use in Rating Extensivity.

ERIC Educational Resources Information Center

Bass, Bernard M.; And Others

Magnitude estimation was employed to find the numerical equivalents of 39 expressions of frequency ranging from never to always, and 44 expressions of amount ranging from none to all. The results were generalizable across three age-education-occupation levels and unaffected by whether ratings were an important or unimportant issue. Geometric means…

Angles between orthogonal spd bond orbitals with maximum strength*

PubMed Central

Pauling, Linus

1976-01-01

An equation is derived for values of bond angles for two equivalent best spd hybrid bond orbitals with given amounts of s, p, and d character, and is applied in the discussion of structures of transargononic compounds, including the xenon and halogen fluorides. Bond orbitals with a rather small amount of d character tend to lie at angles 90° and 180°, and those with a larger amount, at somewhat smaller angles. PMID:16592315

Endothelial network formed with human dermal microvascular endothelial cells in autologous multicellular skin substitutes.

PubMed

Ponec, Maria; El Ghalbzouri, Abdoelwaheb; Dijkman, Remco; Kempenaar, Johanna; van der Pluijm, Gabri; Koolwijk, Pieter

2004-01-01

A human skin equivalent from a single skin biopsy harboring keratinocytes and melanocytes in the epidermal compartment, and fibroblasts and microvascular dermal endothelial cells in the dermal compartment was developed. The results of the study revealed that the nature of the extracellular matrix of the dermal compartments plays an important role in establishment of endothelial network in vitro. With rat-tail type I collagen matrices only lateral but not vertical expansion of endothelial networks was observed. In contrast, the presence of extracellular matrix of entirely human origin facilitated proper spatial organization of the endothelial network. Namely, when human dermal fibroblasts and microvascular endothelial cells were seeded on the bottom of an inert filter and subsequently epidermal cells were seeded on top of it, fibroblasts produced extracellular matrix throughout which numerous branched tubes were spreading three-dimensionally. Fibroblasts also facilitated the formation of basement membrane at the epidermal/matrix interface. Under all culture conditions, fully differentiated epidermis was formed with numerous melanocytes present in the basal epidermal cell layer. The results of the competitive RT-PCR revealed that both keratinocytes and fibroblasts expressed VEGF-A, -B, -C, aFGF and bFGF mRNA, whereas fibroblasts also expressed VEGF-D mRNA. At protein level, keratinocytes produced 10 times higher amounts of VEGF-A than fibroblasts did. The generation of multicellular skin equivalent from a single human skin biopsy will stimulate further developments for its application in the treatment of full-thickness skin defects. The potential development of biodegradable, biocompatible material suitable for these purposes is a great challenge for future research.

Imprint switch mutations at Rasgrf1 support conflict hypothesis of imprinting and define a growth control mechanism upstream of IGF1

PubMed Central

Drake, Nadia M.; Park, Yoon Jung; Shirali, Aditya S.; Cleland, Thomas A.

2010-01-01

Rasgrf1 is imprinted and expressed preferentially from the paternal allele in neonatal mouse brain. At weaning, expression becomes biallelic. Using a mouse model, we assayed the effects of perturbing imprinted Rasgrf1 expression in mice with the following imprinted expression patterns: monoallelic paternal (wild type), monoallelic maternal (maternal only), biallelic (both alleles transcribed), and null (neither allele transcribed). All genotypes exhibit biallelic expression around weaning. Consequences of this transient imprinting perturbation are manifested as overall size differences that correspond to the amount of neonatal Rasgrf1 expressed and are persistent, extending into adulthood. Biallelic mice are the largest and overexpress Rasgrf1 relative to wild-type mice, null mice are the smallest and underexpress Rasgrf1 as neonates, and the two monoallelically expressing genotypes are intermediate and indistinguishable from one another, in both size and Rasgrf1 expression level. Importantly, these data support one of the key underlying assumptions of the “conflict hypothesis” that describes the evolution of genomic imprinting in mammals and supposes that equivalent amounts of imprinted gene expression produce equivalent phenotypes, regardless of which parental allele is transcribed. Concordant with the difference in overall body size, we identify differences in IGF-1 levels, both in serum protein and as liver transcript, and identify additional differential expression of components upstream of IGF-1 release in the GH/IGF-1 axis. These data suggest that imprinted Rasgrf1 expression affects GH/IGF-1 axis function, and that the consequences of Rasgrf1 inputs to this axis persist beyond the time period when expression is restricted via epigenetic mechanisms, suggesting that proper neonatal Rasgrf1 expression levels are critical for development. PMID:19513790

Future change in seasonal march of snow water equivalent due to global climate change

NASA Astrophysics Data System (ADS)

Hara, M.; Kawase, H.; Ma, X.; Wakazuki, Y.; Fujita, M.; Kimura, F.

2012-04-01

Western side of Honshu Island in Japan is one of the heaviest snowfall areas in the world, although the location is relatively lower latitude than other heavy snowfall areas. Snowfall is one of major source for agriculture, industrial, and house-use in Japan. The change in seasonal march of snow water equivalent, e.g., snowmelt season and amount will strongly influence to social-economic activities (ex. Ma et al., 2011). We performed the four numerical experiments including present and future climate simulations and much-snow and less-snow cases using a regional climate model. Pseudo-Global-Warming (PGW) method (Kimura and Kitoh, 2008) is applied for the future climate simulations. NCEP/NCAR reanalysis is used for initial and boundary conditions in present climate simulation and PGW method. MIROC 3.2 medres 2070s output under IPCC SRES A2 scenario and 1990s output under 20c3m scenario used for PGW method. In much-snow cases, Maximum total snow water equivalent over Japan, which is mostly observed in early February, is 49 G ton in the present simulation, the one decreased 26 G ton in the future simulation. The decreasing rate of snow water equivalent due to climate change was 49%. Main cause of the decrease of the total snow water equivalent is strongly affected by the air temperature rise due to global climate change. The difference in present and future precipitation amount is little.

The Relative Importance of Methanogenesis in the Decomposition of Organic Matter in Northern Peatlands

NASA Technical Reports Server (NTRS)

Corbett, J. Elizabeth; Tfaily, Malak M.; Burdige, David J.; Glaser, Paul H.; Chanton, Jeffrey P.

2015-01-01

Using an isotope-mass balance approach and assuming the equimolar production of CO2 and CH4 from methanogenesis (e.g., anaerobic decomposition of cellulose), we calculate that the proportion of total CO2 production from methanogenesis varies from 37 to 83% across a variety of northern peatlands. In a relative sense, methanogenesis was a more important pathway for decomposition in bogs (80 +/- 13% of CO2 production) than in fens (64 +/- 5.7% of CO2 production), but because fens contain more labile substrates they may support higher CH4 production overall. The concentration of CO2 produced from methanogenesis (CO2-meth) can be considered equivalent to CH4 concentration before loss due to ebullition, plant-mediated transport, or diffusion. Bogs produced slightly less CO2-meth than fens (2.9 +/- 1.3 and 3.7 +/- 1.4 mmol/L, respectively). Comparing the quantity of CH4 present to CO2-meth, fens lost slightly more CH4 than bogs (89 +/- 2.8% and 82 +/- 5.3%, respectively) likely due to the presence of vascular plant roots. In collapsed permafrost wetlands, bog moats produced half the amount of CO2-meth (0.8 +/- 0.2mmol/L) relative to midbogs (1.6 +/- 0.6 mmol/L) and methanogenesis was less important (42 +/- 6.6% of total CO2 production relative to 55 +/- 8.1%).We hypothesize that the lower methane production potential in collapsed permafrost wetlands occurs because recently thawed organic substrates are being first exposed to the initial phases of anaerobic decomposition following collapse and flooding. Bog moats lost a comparable amount of CH4 as midbogs (63 +/- 7.0% and 64 +/- 9.3%).

Antioxidant activity and emulsion-stabilizing effect of pectic enzyme treated pectin in soy protein isolate-stabilized oil/water emulsion.

PubMed

Huang, Ping-Hsiu; Lu, Hao-Te; Wang, Yuh-Tai; Wu, Ming-Chang

2011-09-14

The antioxidant activity of pectic enzyme treated pectin (PET-pectin) prepared from citrus pectin by enzymatic hydrolysis and its potential use as a stabilizer and an antioxidant for soy protein isolate (SPI)-stabilized oil in water (O/W) emulsion were investigated. Trolox equivalent antioxidant capacity (TEAC) was found to be positively associated with molecular weight (M(w)) of PET-pectin and negatively associated with degree of esterification (DE) of PET-pectin. PET-pectin (1 kDa and 11.6% DE) prepared from citrus pectin after 24 h of hydrolysis by commercial pectic enzyme produced by Aspergillus niger expressed higher α,α-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging activity, TEAC, and reducing power than untreated citrus pectin (353 kDa and 60% DE). The addition of PET-pectin could increase both emulsifying activity (EA) and emulsion stability (ES) of SPI-stabilized O/W emulsion. When the SPI-stabilized lipid droplet was coated with the mixture of PET-pectin and pectin, the EA and ES of the emulsion were improved more than they were when the lipid droplet was coated with either pectin or PET-pectin alone. The amount of secondary oxidation products (thiobarbituric acid reactive substances) produced in the emulsion prepared with the mixture of SPI and PET-pectin was less than the amount produced in the emulsion prepared with either SPI or SPI/pectin. These results suggest that PET-pectin has an emulsion-stabilizing effect and lipid oxidation inhibition ability on SPI-stabilized emulsion. Therefore, PET-pectin can be used as a stabilizer as well as an antioxidant in plant origin in SPI-stabilized O/W emulsion and thus prolong the shelf life of food emulsion.

The relative importance of methanogenesis in the decomposition of organic matter in northern peatlands

NASA Astrophysics Data System (ADS)

Corbett, J. Elizabeth; Tfaily, Malak M.; Burdige, David J.; Glaser, Paul H.; Chanton, Jeffrey P.

2015-02-01

Using an isotope-mass balance approach and assuming the equimolar production of CO2 and CH4 from methanogenesis (e.g., anaerobic decomposition of cellulose), we calculate that the proportion of total CO2 production from methanogenesis varies from 37 to 83% across a variety of northern peatlands. In a relative sense, methanogenesis was a more important pathway for decomposition in bogs (80 ± 13% of CO2 production) than in fens (64 ± 5.7% of CO2 production), but because fens contain more labile substrates they may support higher CH4 production overall. The concentration of CO2 produced from methanogenesis (CO2-meth) can be considered equivalent to CH4 concentration before loss due to ebullition, plant-mediated transport, or diffusion. Bogs produced slightly less CO2-meth than fens (2.9 ± 1.3 and 3.7 ± 1.4 mmol/L, respectively). Comparing the quantity of CH4 present to CO2-meth, fens lost slightly more CH4 than bogs (89 ± 2.8% and 82 ± 5.3%, respectively) likely due to the presence of vascular plant roots. In collapsed permafrost wetlands, bog moats produced half the amount of CO2-meth (0.8 ± 0.2 mmol/L) relative to midbogs (1.6 ± 0.6 mmol/L) and methanogenesis was less important (42 ± 6.6% of total CO2 production relative to 55 ± 8.1%). We hypothesize that the lower methane production potential in collapsed permafrost wetlands occurs because recently thawed organic substrates are being first exposed to the initial phases of anaerobic decomposition following collapse and flooding. Bog moats lost a comparable amount of CH4 as midbogs (63 ± 7.0% and 64 ± 9.3%).

Co-operative actions and degradation analysis of purified xylan-degrading enzymes from Thermomonospora fusca BD25 on oat-spelt xylan.

PubMed

Tuncer, M; Ball, A S

2003-01-01

To determine and quantify the products from the degradation of xylan by a range of purified xylan-degrading enzymes, endoxylanase, beta-xylosidase and alpha-l-arabinofuranosidase produced extracellularly by Thermomonospora fusca BD25. The amounts of reducing sugars released from oat-spelt xylan by the actions of endoxylanase, beta-xylosidase and alpha-l-arabinofuranosidase were equal to 28.1, 4.6 and 7% hydrolysis (as xylose equivalents) of the substrate used, respectively. However, addition of beta-xylosidase and alpha-l-arabinofuranosidase preparation to endoxylanase significantly enhanced (70 and 20% respectively) the action of endoxylanase on the substrate. The combination of purified endoxylanase, beta-xylosidase and alpha-l-arabinofuranosidase preparations produced a greater sugar yield (58.6% hydrolysis) and enhanced the total reducing sugar yield by around 50%. The main xylooligosaccharide products released using the action of endoxylanase alone on oat-spelt xylan were identified as xylobiose and xylopentose. alpha-l-Arabinofuranosidase was able to release arabinose and xylobiose from oat-spelt xylan. In the presence of all three purified enzymes the hydrolysis products of oat-spelt xylan were mainly xylose, arabinose and substituted xylotetrose with lesser amount of substituted xylotriose. The addition of the beta-xylosidase and alpha-l-arabinofuranosidase enzymes to purified xylanases more than doubled the degradation of xylan from 28 to 58% of the total substrate with xylose and arabinose being the major sugars produced. The results highlight the role of xylan de-branching enzymes in the degradation of xylan and suggest that the use of enzyme cocktails may significantly improve the hydrolysis of xylan in industrial processes.

Response of a tissue equivalent proportional counter to neutrons

NASA Technical Reports Server (NTRS)

Badhwar, G. D.; Robbins, D. E.; Gibbons, F.; Braby, L. A.

2002-01-01

The absorbed dose as a function of lineal energy was measured at the CERN-EC Reference-field Facility (CERF) using a 512-channel tissue equivalent proportional counter (TEPC), and neutron dose equivalent response evaluated. Although there are some differences, the measured dose equivalent is in agreement with that measured by the 16-channel HANDI tissue equivalent counter. Comparison of TEPC measurements with those made by a silicon solid-state detector for low linear energy transfer particles produced by the same beam, is presented. The measurements show that about 4% of dose equivalent is delivered by particles heavier than protons generated in the conducting tissue equivalent plastic. c2002 Elsevier Science Ltd. All rights reserved.

Distinguishing between Schemes of Mathematical Equivalence: Joe's Transition to Anticipatory Quantitative Relational Equivalence

ERIC Educational Resources Information Center

Woodward, Jerry

2016-01-01

This study examined how a child constructed a scheme (abbreviated QRE) for producing mathematical equivalence via operations on composite units between two multiplicative situations consisting of singletons and composite units. Within the context of a teaching experiment, the work of one child, Joe, was analyzed over the course of 14 teaching…

Electricity-driven metabolic shift through direct electron uptake by electroactive heterotroph Clostridium pasteurianum

PubMed Central

Choi, Okkyoung; Kim, Taeyeon; Woo, Han Min; Um, Youngsoon

2014-01-01

Although microbes directly accepting electrons from a cathode have been applied for CO2 reduction to produce multicarbon-compounds, a high electron demand and low product concentration are critical limitations. Alternatively, the utilization of electrons as a co-reducing power during fermentation has been attempted, but there must be exogenous mediators due to the lack of an electroactive heterotroph. Here, we show that Clostridium pasteurianum DSM 525 simultaneously utilizes both cathode and substrate as electron donors through direct electron transfer. In a cathode compartment poised at +0.045 V vs. SHE, a metabolic shift in C. pasteurianum occurs toward NADH-consuming metabolite production such as butanol from glucose (20% shift in terms of NADH consumption) and 1,3-propandiol from glycerol (21% shift in terms of NADH consumption). Notably, a small amount of electron uptake significantly induces NADH-consuming pathways over the stoichiometric contribution of the electrons as reducing equivalents. Our results demonstrate a previously unknown electroactivity and metabolic shift in the biochemical-producing heterotroph, opening up the possibility of efficient and enhanced production of electron-dense metabolites using electricity. PMID:25376371

Study on new biomass energy systems

NASA Astrophysics Data System (ADS)

1992-03-01

A biomass energy total system is proposed, and its feasibility is studied. It is the system in which liquid fuel is produced from eucalyptuses planted in the desert area in Australia for production of biomass resource. Eucalyptus tree planting aims at a growth amount of 40 cu m/ha. per year and a practical application area of 45,000ha. CO2 fixation in the biomass plantation becomes 540,000 tons at a 12 ton/ha. rate. Assuming that 0.55 ton of liquid fuel is produced from 1 ton of biomass, a petrochemical plant having a production of 2.5 million bbl/year per unit (equivalent to the fuel used in the 100,000kW class power plant) is needed. Moreover, survey is made on practicality of diesel substitution fuel by esterification of palm oil, and a marked effect of reduction in soot/smoke and particulates in exhaust gas is confirmed. The biomass conversion process technology and the technology for afforestation at the arid land and irrigation are important as future subjects, and the technology development using a bench plant and a pilot plant is needed.

On-ground detection of an electron-positron annihilation line from thunderclouds.

PubMed

Umemoto, D; Tsuchiya, H; Enoto, T; Yamada, S; Yuasa, T; Kawaharada, M; Kitaguchi, T; Nakazawa, K; Kokubun, M; Kato, H; Okano, M; Tamagawa, T; Makishima, K

2016-02-01

Thunderclouds can produce bremsstrahlung gamma-ray emission, and sometimes even positrons. At 00:27:00 (UT) on 13 January 2012, an intense burst of gamma rays from a thundercloud was detected by the GROWTH experiment, located in Japan, facing the Sea of Japan. The event started with a sharp gamma-ray flash with a duration of <300 ms coincident with an intracloud discharge, followed by a decaying longer gamma-ray emission lasting for ∼60 s. The spectrum of this prolonged emission reached ∼10 MeV, and contained a distinct line emission at 508±3(stat.)±5(sys.) keV, to be identified with an electron-positron annihilation line. The line was narrow within the instrumental energy resolution (∼80keV), and contained 520±50 photons which amounted to ∼10% of the total signal photons of 5340±190 detected over 0.1-10 MeV. As a result, the line equivalent width reached 280±40 keV, which implies a nontrivial result. The result suggests that a downward positron beam produced both the continuum and the line photons.

Producing more power from existing hydro resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Connor, J.

1993-02-01

Rehabilitation is big business in the North American hydropower industry. Hydropower producers are replacing or rehabilitating turbines, uprating old hydro generators, and installing advanced control systems. Estimates indicate that as much as 15,000 MW of new electricall generating capacity can be obtained by rehabilitating existing hydro facilities. The cost of developing this capacity is far less than for building new power projects. In most rehabilitation projects, the existing dam, powerhouse, and access roads are retained; only new mechanical and electrica equipment is required. As a result, these projects often can be accomplished for about half the cost of developing amore » new thermal plant to provide an equivalent amount of capacity. This new power does not contribute to atmospheric pollution, cause increases in operations and maintenance costs, or create uncertainties about fuel sources. The Bureau of Reclamation, the Salt River Project, the New York Power Authority, and the Tennessee Valley Authority all are either in the midst of major hydro rehabilitation projects or gearing up for future work. This activity indicates a healthy market of hydro products and services for years to come.« less

Deposit model for volcanogenic uranium deposits

USGS Publications Warehouse

Breit, George N.; Hall, Susan M.

2011-01-01

The International Atomic Energy Agency's tabulation of volcanogenic uranium deposits lists 100 deposits in 20 countries, with major deposits in Russia, Mongolia, and China. Collectively these deposits are estimated to contain uranium resources of approximately 500,000 tons of uranium, which amounts to 6 percent of the known global resources. Prior to the 1990s, these deposits were considered to be small (less than 10,000 tons of uranium) with relatively low to moderate grades (0.05 to 0.2 weight percent of uranium). Recent availability of information on volcanogenic uranium deposits in Asia highlighted the large resource potential of this deposit type. For example, the Streltsovskoye district in eastern Russia produced more than 100,000 tons of uranium as of 2005; with equivalent resources remaining. Known volcanogenic uranium deposits within the United States are located in Idaho, Nevada, Oregon, and Utah. These deposits produced an estimated total of 800 tons of uranium during mining from the 1950s through the 1970s and have known resources of 30,000 tons of uranium. The most recent estimate of speculative resources proposed an endowment of 200,000 tons of uranium.

On-ground detection of an electron-positron annihilation line from thunderclouds

NASA Astrophysics Data System (ADS)

Umemoto, D.; Tsuchiya, H.; Enoto, T.; Yamada, S.; Yuasa, T.; Kawaharada, M.; Kitaguchi, T.; Nakazawa, K.; Kokubun, M.; Kato, H.; Okano, M.; Tamagawa, T.; Makishima, K.

2016-02-01

Thunderclouds can produce bremsstrahlung gamma-ray emission, and sometimes even positrons. At 00:27:00 (UT) on 13 January 2012, an intense burst of gamma rays from a thundercloud was detected by the GROWTH experiment, located in Japan, facing the Sea of Japan. The event started with a sharp gamma-ray flash with a duration of <300 ms coincident with an intracloud discharge, followed by a decaying longer gamma-ray emission lasting for ˜60 s. The spectrum of this prolonged emission reached ˜10 MeV, and contained a distinct line emission at 508 ±3 (stat .)±5 (sys .) keV, to be identified with an electron-positron annihilation line. The line was narrow within the instrumental energy resolution (˜80 keV) , and contained 520 ±50 photons which amounted to ˜10 % of the total signal photons of 5340 ±190 detected over 0.1-10 MeV. As a result, the line equivalent width reached 280 ±40 keV, which implies a nontrivial result. The result suggests that a downward positron beam produced both the continuum and the line photons.

[Functions of different cultivation modes in oasis agriculture on soil wind erosion control and soil moisture conservation].

PubMed

Su, Peixi; Zhao, Aifen; Du, Mingwu

2004-09-01

During 2001-2002, the effects of different cultivation modes including winter irrigation and zero tillage, crop-grass intercropping, and early spring film mulching on sand entrainment, wind velocity gradient and soil moisture conservation were studied in the middle reaches of the Heihe River in the Hexi Corridor region. The results showed that all these modes could reduce soil wind erosion and halt sand entrainment to different degrees. Compared with the bare fields exposed by spring plowing, early spring film mulching could increase soil moisture storage by 35.6%. At present, spring plowing and sowing was a main factor responsible to the occurrence of sand storms and the increase in suspended dust content. Farmlands in the upper and middle reaches of the Heihe River generally produced a dust transport up to 4.8-6.0 million tons per year, which was higher than that of sandy desert in the same region. In the Hexi Corridor region, the suspended dust amount produced from 1 hm2 farmland was equivalent to that of 1.5 hm2 desert.

Green synthesis of chalcones derivatives as intermediate of flavones and their antibacterial activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

VH, Elfi Susanti, E-mail: elsantivh@yahoo.com; Redjeki, Tri, E-mail: tri-redjeki@yahoo.com; Matsjeh, Sabirin, E-mail: sabirin-mara@yahoo.com

Four chalcones derivatives have been synthesized from 3,4-dimethoxybenzaldehyde and acetophenone derivatives (2-hydroxy acetophenone, 2,4-dihydroxy acetophenone, 2,5-dihydroxy acetophenone and 2,6-dihydroxy acetophenone). The synthesis of these chalcones were conducted by Claisen-Schmidt condensation using grinding techniques at room temperature in the absence of solvents. The chalcones were prepared by grinding together equivalent amount of the approriate hydroxyacetophenone and 3,4-dimethoxybenzaldehyde in the presence of solid sodium hydroxide. Grinding techniques for synthesis of the chalcones derivatives is simple, efficient and environmentally benign compared to conventional methods. Then, the four chalcones derivatives undergo cyclization reactions to produce four flavones after reacted with iodine. The synthesized compoundsmore » were characterized by spectrometry (IR, {sup 1}H-NMR, {sup 13}C-NMR and MS)« less

Drying of vanilla pods using a greenhouse effect solar dryer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdullah, K.; Mursalim

This paper describes the basic design of the GHE solar dryer and evaluates the performance of the dryer when used to dry vanilla pods. From laboratory test results it was indicted that the average drying time for vanilla pods was between 49 to 53.5 hrs. For the case of heating augmentation using coal briquette stoves. The total amount of coal briquettes used to produce drying air temperature between 33 C to 65 C and RH of about 34% during day time was 61 kg equivalent to 6.1 kW heating rate and the average electric energy usage of 36.5 kWh, respectively.more » Quality test results indicated that the dried products were of grade IA of the export quality standard with vaniline content of 2.36%.« less

The use of snowcovered area in runoff forecasts

NASA Technical Reports Server (NTRS)

Rango, A.; Hannaford, J. F.; Hall, R. L.; Rosenzweig, M.; Brown, A. J.

1977-01-01

Long-term snowcovered area data from aircraft and satellite observations have proven useful in reducing seasonal runoff forecast error on the Kern river watershed. Similar use of snowcovered area on the Kings river watershed produced results that were about equivalent to methods based solely on conventional data. Snowcovered area will be most effective in reducing forecast procedural error on watersheds with: (1) a substantial amount of area within a limited elevation range; (2) an erratic precipitation and/or snowpack accumulation pattern not strongly related to elevation; and (3) poor coverage by precipitation stations or snow courses restricting adequate indexing of water supply conditions. When satellite data acquisition and delivery problems are resolved, the derived snowcover information should provide a means for enhancing operational streamflow forecasts for areas that depend primarily on snowmelt for their water supply.

The effects of baseball bat mass properties on swing mechanics, ground reaction forces, and swing timing.

PubMed

Laughlin, Walter A; Fleisig, Glenn S; Aune, Kyle T; Diffendaffer, Alek Z

2016-01-01

Swing trajectory and ground reaction forces (GRF) of 30 collegiate baseball batters hitting a pitched ball were compared between a standard bat, a bat with extra weight about its barrel, and a bat with extra weight in its handle. It was hypothesised that when compared to a standard bat, only a handle-weighted bat would produce equivalent bat kinematics. It was also hypothesised that hitters would not produce equivalent GRFs for each weighted bat, but would maintain equivalent timing when compared to a standard bat. Data were collected utilising a 500 Hz motion capture system and 1,000 Hz force plate system. Data between bats were considered equivalent when the 95% confidence interval of the difference was contained entirely within ±5% of the standard bat mean value. The handle-weighted bat had equivalent kinematics, whereas the barrel-weighted bat did not. Both weighted bats had equivalent peak GRF variables. Neither weighted bat maintained equivalence in the timing of bat kinematics and some peak GRFs. The ability to maintain swing kinematics with a handle-weighted bat may have implications for swing training and warm-up. However, altered timings of kinematics and kinetics require further research to understand the implications on returning to a conventionally weighted bat.

Effect of strain and deformation route on grain boundary characteristics and recrystallization behavior of aluminum

NASA Astrophysics Data System (ADS)

Sakai, Tetsuo; Utsunomiya, Hiroshi; Takahashi, Yasuo

2014-08-01

The effect of strain and deformation route on the recrystallization behavior of aluminum sheets has been investigated using well lubricated cold rolling and continuous equal channel angular extrusion. Three different deformation routes in plane strain corresponding to (1) simple shear, (2) compression, and (3) the combination of simple shear and compression were performed on 1100 aluminum sheet. Fixed amounts of the equivalent strain of 1.28 and 1.06 were accumulated in each route. In case of the combined deformation route, the ratio of shear strain to the total equivalent strain was varied. The recrystallized grain size was finer if the combined deformation route was employed instead of the monotonic route under the same amount of equivalent strain at either strain level. The density of high angle grain boundaries that act as nucleation sites for recrystallization was higher in materials deformed by the combined route. The orientation imaging micrographs revealed that the change in deformation route is effective for introducing a larger number of new high angle grain boundaries with relatively low misorientation angle.

Equivalent Noise Dose Obtained through Hearing Aids in the Classrooms of Hearing-Impaired Children.

ERIC Educational Resources Information Center

Wilde, Ronald A.

1990-01-01

A commercial noise dose meter was used to estimate the equivalent noise dose received through high-gain hearing aids worn in four classrooms in a school for deaf children. There were no significant differences among nominal saturation sound pressure level (SSPL) settings, and all SSPL settings produced very high equivalent noise doses. (Author/JDD)

Comparative statistical component analysis of transgenic, cyanophycin-producing potatoes in greenhouse and field trials.

PubMed

Schmidt, Kerstin; Schmidtke, Jörg; Mast, Yvonne; Waldvogel, Eva; Wohlleben, Wolfgang; Klemke, Friederike; Lockau, Wolfgang; Hausmann, Tina; Hühns, Maja; Broer, Inge

2017-08-01

Potatoes are a promising system for industrial production of the biopolymer cyanophycin as a second compound in addition to starch. To assess the efficiency in the field, we analysed the stability of the system, specifically its sensitivity to environmental factors. Field and greenhouse trials with transgenic potatoes (two independent events) were carried out for three years. The influence of environmental factors was measured and target compounds in the transgenic plants (cyanophycin, amino acids) were analysed for differences to control plants. Furthermore, non-target parameters (starch content, number, weight and size of tubers) were analysed for equivalence with control plants. The huge amount of data received was handled using modern statistical approaches to model the correlation between influencing environmental factors (year of cultivation, nitrogen fertilization, origin of plants, greenhouse or field cultivation) and key components (starch, amino acids, cyanophycin) and agronomic characteristics. General linear models were used for modelling, and standard effect sizes were applied to compare conventional and genetically modified plants. Altogether, the field trials prove that significant cyanophycin production is possible without reduction of starch content. Non-target compound composition seems to be equivalent under varying environmental conditions. Additionally, a quick test to measure cyanophycin content gives similar results compared to the extensive enzymatic test. This work facilitates the commercial cultivation of cyanophycin potatoes.

Determination of Lovastatin, β-glucan, Total Polyphenols, and Antioxidant Activity in Raw and Processed Oyster Culinary-Medicinal Mushroom, Pleurotus ostreatus (Higher Basidiomycetes).

PubMed

Lam, Yu Shan; Okello, Edward J

2015-01-01

The objective of this study was to quantify a number of bioactive compounds and antioxidant activity of the oyster mushroom, Pleurotus. Ostreatus, and characterize the effects of processing, such as blanching, on these outcomes. Dry matter content was 8%. Lovastatin was not detected in this study. β-glucan content of 23.9% and total polyphenol content of 487.12 mg gallic acid equivalent/100 g of dry matter were obtained in raw P. ostreatus. Antioxidant activities as evaluated by 1,1-diphenyl-2-picrylhydrazyl, Trolox equivalent antioxidant capacity, and ferric reducing antioxidant power assays in raw P. ostreatus were 14.46, 16.51, and 11.21 µmol/g, respectively. Blanching did not significantly affect β-glucan content but caused significant decrease in dry matter content, polyphenol content, and antioxidant activities. Mushroom rolls produced from blanched mushrooms and blanching water contained significantly higher amounts of β-glucan, total polyphenol content, and FRAP antioxidant activity compared to blanched mushrooms. In conclusion, P. ostreatus is a good source for β-glucan, dietary polyphenols, and antioxidants. Although the blanching process could affect these properties, re-addition of the blanching water during the production process of mushroom rolls could potentially recover these properties and is therefore recommended.

Threefold growth efficiency improvement of silica nanosprings by using silica nanosprings as a substrate

NASA Astrophysics Data System (ADS)

Corti, Giancarlo; Brown, Justin; Rajabi, Negar; McIlroy, D. N.

2018-03-01

The growth efficiency of one-dimension (1D) nanostructures via the vapor-liquid-solid process is commonly attributed to parameters such as precursor vapor pressure, substrate temperature, and the choice of the catalyst. The work presented herein is an investigation of the use of silica nanosprings (SNs) as a 3D substrate for improving the growth efficiency of SN themselves. SNs are a 1D nanomaterial that form a nonwoven structure with optimal geometric characteristics and surface properties that mitigate collisions between growing nanosprings and ripening of the gold catalyst, which should improve SN yield. Nanospring growth, for an eight hour period, on an SN coated surface relative to an equivalent flat substrate increased from ≈25 mgh-1 to ≈80 mgh-1, respectively. All things being equal, by splitting the typical amount of catalyst, in this case gold, between the first and second growth, the double growth procedure produced more than three times more nanosprings than the equivalent single growth of a SN. In addition, using an SN as a substrate increased the sustained growth condition from four to eight hours, and thus increased by a factor of ten the gravimetric yield of SNs relative to the mass of gold used.

An equivalent n-source for WGPu derived from a spectrum-shifted PuBe source

NASA Astrophysics Data System (ADS)

Ghita, Gabriel; Sjoden, Glenn; Baciak, James; Walker, Scotty; Cornelison, Spring

2008-04-01

We have designed, built, and laboratory-tested a unique shield design that transforms the complex neutron spectrum from PuBe source neutrons, generated at high energies, to nearly exactly the neutron signature leaking from a significant spherical mass of weapons grade plutonium (WGPu). This equivalent "X-material shield assembly" (Patent Pending) enables the harder PuBe source spectrum (average energy of 4.61 MeV) from a small encapsulated standard 1-Ci PuBe source to be transformed, through interactions in the shield, so that leakage neutrons are shifted in energy and yield to become a close reproduction of the neutron spectrum leaking from a large subcritical mass of WGPu metal (mean energy 2.11 MeV). The utility of this shielded PuBe surrogate for WGPu is clear, since it directly enables detector field testing without the expense and risk of handling large amounts of Special Nuclear Materials (SNM) as WGPu. Also, conventional sources using Cf-252, which is difficult to produce, and decays with a 2.7 year half life, could be replaced by this shielded PuBe technology in order to simplify operational use, since a sealed PuBe source relies on Pu-239 (T½=24,110 y), and remains viable for more than hundreds of years.

Sewage Management Changes in the North-eastern Poland After Accession to the European Union

NASA Astrophysics Data System (ADS)

Skarżyński, Szymon; Bartkowska, Izabela

2018-02-01

Poland's accession to the European Union contributed to the infrastructure development of the whole country. One of the elements of the modernized infrastructure is the sewage network and facilities on this network, as well as facilities for waste water treatment and disposal of sludge. A wide stream of funds flowing to the country, and consequently also to the north-eastern polish voivodeships (Podlaskie, Warmian-Masurian, Lublin), allowed modernization, organize, and sometimes to build a new sewage management of this part of the country. The main factors and parameters that allow us to evaluate the development of the sewage management in north-eastern Poland are included: percentage of population using sewage treatment plants, number of municipal sewage plants with the division of their type, number of industrial plants, number of septic tanks, amount of sewage purified in a year, amount of sludge produced in the year, design capacity of sewage treatment plant, size of plant in population equivalent (PE). From a number of investments in the field of wastewater management carried out in the discussed area in the period after Poland's accession to the European Union, 9 investments were considered the most important, 3 from each of the voivodeships.

Internal performance characteristics of thrust-vectored axisymmetric ejector nozzles

NASA Technical Reports Server (NTRS)

Lamb, Milton

1995-01-01

A series of thrust-vectored axisymmetric ejector nozzles were designed and experimentally tested for internal performance and pumping characteristics at the Langley research center. This study indicated that discontinuities in the performance occurred at low primary nozzle pressure ratios and that these discontinuities were mitigated by decreasing expansion area ratio. The addition of secondary flow increased the performance of the nozzles. The mid-to-high range of secondary flow provided the most overall improvements, and the greatest improvements were seen for the largest ejector area ratio. Thrust vectoring the ejector nozzles caused a reduction in performance and discharge coefficient. With or without secondary flow, the vectored ejector nozzles produced thrust vector angles that were equivalent to or greater than the geometric turning angle. With or without secondary flow, spacing ratio (ejector passage symmetry) had little effect on performance (gross thrust ratio), discharge coefficient, or thrust vector angle. For the unvectored ejectors, a small amount of secondary flow was sufficient to reduce the pressure levels on the shroud to provide cooling, but for the vectored ejector nozzles, a larger amount of secondary air was required to reduce the pressure levels to provide cooling.

48 CFR 32.404 - Exclusions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REQUIREMENTS CONTRACT FINANCING Advance Payments for Non-Commercial Items 32.404 Exclusions. (a) This subpart... equivalent amount of the applicable foreign currency); and (ii) The advance payment is required by the laws...

48 CFR 32.404 - Exclusions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REQUIREMENTS CONTRACT FINANCING Advance Payments for Non-Commercial Items 32.404 Exclusions. (a) This subpart... equivalent amount of the applicable foreign currency); and (ii) The advance payment is required by the laws...

Complex toxin profile of French Mediterranean Ostreopsis cf. ovata strains, seafood accumulation and ovatoxins prepurification.

PubMed

Brissard, Charline; Herrenknecht, Christine; Séchet, Véronique; Hervé, Fabienne; Pisapia, Francesco; Harcouet, Jocelyn; Lémée, Rodolphe; Chomérat, Nicolas; Hess, Philipp; Amzil, Zouher

2014-05-13

Ostreopsis cf. ovata produces palytoxin analogues including ovatoxins (OVTXs) and a putative palytoxin (p-PLTX), which can accumulate in marine organisms and may possibly lead to food intoxication. However, purified ovatoxins are not widely available and their toxicities are still unknown. The aim of this study was to improve understanding of the ecophysiology of Ostreopsis cf. ovata and its toxin production as well as to optimize the purification process for ovatoxin. During Ostreopsis blooms in 2011 and 2012 in Villefranche-sur-Mer (France, NW Mediterranean Sea), microalgae epiphytic cells and marine organisms were collected and analyzed both by LC-MS/MS and hemolysis assay. Results obtained with these two methods were comparable, suggesting ovatoxins have hemolytic properties. An average of 223 μg·kg-1 of palytoxin equivalent of whole flesh was found, thus exceeding the threshold of 30 μg·kg-1 in shellfish recommended by the European Food Safety Authority (EFSA). Ostreopsis cells showed the same toxin profile both in situ and in laboratory culture, with ovatoxin-a (OVTX-a) being the most abundant analogue (~50%), followed by OVTX-b (~15%), p-PLTX (12%), OVTX-d (8%), OVTX-c (5%) and OVTX-e (4%). Ostreopsis cf. ovata produced up to 2 g of biomass per L of culture, with a maximum concentration of 300 pg PLTX equivalent cell-1. Thus, an approximate amount of 10 mg of PLTX-group toxins may be produced with 10 L of this strain. Toxin extracts obtained from collected biomass were purified using different techniques such as liquid-liquid partition or size exclusion. Among these methods, open-column chromatography with Sephadex LH20 phase yielded the best results with a cleanup efficiency of 93% and recovery of about 85%, representing an increase of toxin percentage by 13 fold. Hence, this purification step should be incorporated into future isolation exercises.

Buying less and wasting less food. Changes in household food energy purchases, energy intakes and energy density between 2007 and 2012 with and without adjustment for food waste.

PubMed

Whybrow, Stephen; Horgan, Graham W; Macdiarmid, Jennie I

2017-05-01

Consumers in the UK responded to the rapid increases in food prices between 2007 and 2009 partly by reducing the amount of food energy bought. Household food and drink waste has also decreased since 2007. The present study explored the combined effects of reductions in food purchases and waste on estimated food energy intakes and dietary energy density. The amount of food energy purchased per adult equivalent was calculated from Kantar Worldpanel household food and drink purchase data for 2007 and 2012. Food energy intakes were estimated by adjusting purchase data for food and drink waste, using waste factors specific to the two years and scaled for household size. Scotland. Households in Scotland (n 2657 in 2007; n 2841 in 2012). The amount of food energy purchased decreased between 2007 and 2012, from 8·6 to 8·2 MJ/adult equivalent per d (P<0·001). After accounting for the decrease in food waste, estimated food energy intake was not significantly different (7·3 and 7·2 MJ/adult equivalent per d for 2007 and 2012, respectively; P=0·186). Energy density of foods purchased increased slightly from 700 to 706 kJ/100 g (P=0·010). While consumers in Scotland reduced the amount of food energy that they purchased between 2007 and 2012, this was balanced by reductions in household food and drink waste over the same time, resulting in no significant change in net estimated energy intake of foods brought into the home.

An integrated data analysis approach to investigating measurement equivalence of DSM nicotine dependence symptoms.

PubMed

Rose, Jennifer S; Dierker, Lisa C; Hedeker, Donald; Mermelstein, Robin

2013-04-01

Research identifying nicotine dependence (ND) symptoms most appropriate for measurement of adolescent ND and invariant across the range of smoking exposure is hampered by limited sample size and variability of smoking behavior within independent studies. Integrative data analysis, the process of pooling and analyzing data from multiple studies, produces larger and more heterogeneous samples with which to evaluate measurement equivalence across the full continuum of smoking quantity and frequency. Data from two studies were pooled to obtain a large sample of adolescent and young adult smokers with considerable variability in smoking. We used moderated nonlinear factor analysis, which produces study equivalent ND scores, to simultaneously evaluate whether 14 DSM ND symptoms had equivalent psychometric properties (1) at different levels of smoking frequency and (2) across a continuous range of smoking quantity, after accounting for study differences. Nine of 14 symptoms were equivalent across levels of smoking frequency and quantity in probability of endorsement at different levels of ND and in ability to discriminate between levels of ND severity. A more precise ND factor score accounted for study and smoking related differences in symptom psychometric properties. DSM-IV symptoms may be used to reliably assess ND in young populations across a wide range of smoking quantity and frequency and within both nationally representative and geographically restricted samples with different study designs. Symptoms shared across studies produced an equivalently scaled ND factor score, demonstrating that integrating data for the purpose of studying ND in young smokers is viable. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The Effects of Different Training Structures in the Establishment of Conditional Discriminations and Subsequent Performance on Tests for Stimulus Equivalence

ERIC Educational Resources Information Center

Arntzen, Erik; Grondahl, Terje; Eilifsen, Christoffer

2010-01-01

Previous studies comparing groups of subjects have indicated differential probabilities of stimulus equivalence outcome as a function of training structures. One-to-Many (OTM) and Many-to-One (MTO) training structures seem to produce positive outcomes on tests for stimulus equivalence more often than a Linear Series (LS) training structure does.…

40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM 2.5 Class II Equivalent Samplers

Code of Federal Regulations, 2013 CFR

2013-07-01

... II Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel... Results: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

Code of Federal Regulations, 2012 CFR

2012-07-01

... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr and 24... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM 2.5 Class II Equivalent Samplers

Code of Federal Regulations, 2014 CFR

2014-07-01

... II Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel... Results: 95% ≤Rc ≤105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr... Class II Equivalent Samplers F Table F-1 to Subpart F of Part 53 Protection of Environment ENVIRONMENTAL...

Fast Abiotic Production of Methane at Temperatures Below 100°C

NASA Astrophysics Data System (ADS)

Etiope, G.; Ionescu, A.

2015-12-01

Fischer-Tropsch Type (FTT) reactions, e.g., the Sabatier synthesis between H2 and CO2, are considered a main source of abiotic methane on Earth and likely on other planets. Several laboratory FTT experiments demonstrated abiotic CH4 production at temperatures above 200°C, by using Fe, Ni or Cr catalysts, simulating hydrothermal conditions in peridotite-hosted systems in mid-ocean ridges. Nevertheless, at least on laboratory experiment time-scale, Fe-Ni-Cr catalysts do not support CH4 generation at T<100°C, such as those of land-based serpentinization systems. We have recently reported rapid production of considerable amounts of CH4 (>800 ppmv in 155 mL bottles after 1 day) via Sabatier reaction at 90, 50 and 25°C, using small concentrations of non-pretreated ruthenium (Ru) equivalent to those occurring in chromitites in continental ultramafic rocks (Etiope & Ionescu, 2014; Geofluids, doi:10.1111/gfl.12106). We have repeated the experiments by using 13C-enriched CO2 and we confirm fast production of CH4at percentage levels. The experiments performed so far show that: 1. considerable amounts of CH4can be produced in dry conditions below 100°C with small quantities of Ru; 2. under the same experimental conditions (<100°C), Fe, Ni and Cr oxides do not produce CH4; 3. low T Sabatier reaction can produce CH4 with a large C isotope fractionation between CO2 and CH4, leading to relatively " light" (13C-depleted) CH4, resembling microbial gas; 4. the CO2-CH4isotope separation decreases over time and by increasing the temperature; 5. minor amounts of C2-C6hydrocarbons are also generated. Our laboratory data are compatible with the isotopic patterns of CH4 naturally occurring in land-based seeps and springs. Our experiments suggest that Ru-enriched chromitites could potentially generate CH4 at low T. Since Ru is reported in Martian meteorites, low T abiotic CH4 production on Mars via Sabatier reaction cannot be excluded (Etiope et al. 2013, Icarus, 224, 276-285).

Hydrogen Fuel Cell: Research Progress and Near-Term Opportunities

DTIC Science & Technology

2009-04-27

deployment) from $5.00 to $3.00 per gallon gasoline equivalent ( gge )* – a 40% reduction.[2] Christy Cooper US Department of Energy Hydrogen Program...renewable-based technologies (assuming widespread deployment) from $5.15 to $4.80 per gge (e.g., electroly- sis and distributed reforming† of bio...to gaso- line. The amount of fuel with the energy content of one gallon of gaso- line is referred to as a gallon gasoline equivalent, or gge

A new method for testing the scale-factor performance of fiber optical gyroscope

NASA Astrophysics Data System (ADS)

Zhao, Zhengxin; Yu, Haicheng; Li, Jing; Li, Chao; Shi, Haiyang; Zhang, Bingxin

2015-10-01

Fiber optical gyro (FOG) is a kind of solid-state optical gyroscope with good environmental adaptability, which has been widely used in national defense, aviation, aerospace and other civilian areas. In some applications, FOG will experience environmental conditions such as vacuum, radiation, vibration and so on, and the scale-factor performance is concerned as an important accuracy indicator. However, the scale-factor performance of FOG under these environmental conditions is difficult to test using conventional methods, as the turntable can't work under these environmental conditions. According to the phenomenon that the physical effects of FOG produced by the sawtooth voltage signal under static conditions is consistent with the physical effects of FOG produced by a turntable in uniform rotation, a new method for the scale-factor performance test of FOG without turntable is proposed in this paper. In this method, the test system of the scale-factor performance is constituted by an external operational amplifier circuit and a FOG which the modulation signal and Y waveguied are disconnected. The external operational amplifier circuit is used to superimpose the externally generated sawtooth voltage signal and the modulation signal of FOG, and to exert the superimposed signal on the Y waveguide of the FOG. The test system can produce different equivalent angular velocities by changing the cycle of the sawtooth signal in the scale-factor performance test. In this paper, the system model of FOG superimposed with an externally generated sawtooth is analyzed, and a conclusion that the effect of the equivalent input angular velocity produced by the sawtooth voltage signal is consistent with the effect of input angular velocity produced by the turntable is obtained. The relationship between the equivalent angular velocity and the parameters such as sawtooth cycle and so on is presented, and the correction method for the equivalent angular velocity is also presented by analyzing the influence of each parameter error on the equivalent angular velocity. A comparative experiment of the method proposed in this paper and the method of turntable calibration was conducted, and the scale-factor performance test results of the same FOG using the two methods were consistent. Using the method proposed in this paper to test the scale-factor performance of FOG, the input angular velocity is the equivalent effect produced by a sawtooth voltage signal, and there is no need to use a turntable to produce mechanical rotation, so this method can be used to test the performance of FOG at the ambient conditions which turntable can not work.

Ciguatera: a public health perspective.

PubMed

Dickey, Robert W; Plakas, Steven M

2010-08-15

Ciguatera fish poisoning is a seafood-borne illness caused by consumption of fish that have accumulated lipid-soluble ciguatoxins. In the United States, ciguatera is responsible for the highest reported incidence of food-borne illness outbreaks attributed to finfish, and it is reported to hold this distinction globally. Ciguatoxins traverse the marine food web from primary producers, Gambierdiscus spp., to commonly consumed fish in tropical and subtropical regions of the world. Ciguatoxins comprise 12 known congeners among Caribbean and tropical Atlantic fish and 29 reported congeners among Pacific fish. Expanding trade in fisheries from ciguatera-endemic regions contributes to wider distribution and increasing frequency of disease among seafood consumers in non-endemic regions. Ciguatoxins produce a complex array of gastrointestinal, neurological and cardiological symptoms. Treatment options are very limited and supportive in nature. Information derived from the study of ciguatera outbreaks has improved clinical recognition, confirmation, and timely treatment. Such studies are equally important for the differentiation of ciguatoxin profiles in fish from one region to the next, the determination of toxicity thresholds in humans, and the formulation of safety limits. Analytical information from case and outbreak investigations was used to derive Pacific and Caribbean ciguatoxin threshold contamination rates for adverse effects in seafood consumers. To these threshold estimates 10-fold safety factors were applied to address individual human risk factors; uncertainty in the amount of fish consumed; and analytical accuracy. The studies may serve as the basis for industry and consumer advisory levels of 0.10ppb C-CTX-1 equivalent toxicity in fish from the tropical Atlantic, Gulf of Mexico, Caribbean, and 0.01ppb P-CTX-1 equivalent toxicity in fish from Pacific regions. Published by Elsevier Ltd.

47 CFR 3.47 - Use of SDRs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... authority and an equivalent amount in US dollars must be paid to the foreign administration. The conversion rate will be the applicable rate published by the International Monetary Fund (IMF) for the date of...

Characterization of Tubing from Advanced ODS alloy (FCRD-NFA1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maloy, Stuart Andrew; Aydogan, Eda; Anderoglu, Osman

2016-09-20

Fabrication methods are being developed and tested for producing fuel clad tubing of the advanced ODS 14YWT and FCRD-NFA1 ferritic alloys. Three fabrication methods were based on plastically deforming a machined thick-wall tube sample of the ODS alloys by pilgering, hydrostatic extrusion or drawing to decrease the outer diameter and wall thickness and increase the length of the final tube. The fourth fabrication method consisted of the additive manufacturing approach involving solid-state spray deposition (SSSD) of ball milled and annealed powder of 14YWT for producing thin-wall tubes. Of the four fabrication methods, two methods were successful at producing tubing formore » further characterization: production of tubing by high-velocity oxy-fuel spray forming and production of tubing using high-temperature hydrostatic extrusion. The characterization described shows through neutron diffraction the texture produced during extrusion while maintaining the beneficial oxide dispersion. In this research, the parameters for innovative thermal spray deposition and hot extrusion processing methods have been developed to produce the final nanostructured ferritic alloy (NFA) tubes having approximately 0.5 mm wall thickness. Effect of different processing routes on texture and grain boundary characteristics has been investigated. It was found that hydrostatic extrusion results in combination of plane strain and shear deformations which generate rolling textures of α- and γ-fibers on {001}<110> and {111}<110> together with a shear texture of ζ-fiber on {011}<211> and {011}<011>. On the other hand, multi-step plane strain deformation in cross directions leads to a strong rolling textures of θ- and ε-fiber on {001}<110> together with weak γ-fiber on {111}<112>. Even though the amount of the equivalent strain is similar, shear deformation leads to much lower texture indexes compared to the plane strain deformations. Moreover, while 50% of hot rolling brings about a large number of high-angle grain boundaries (HAB), 44% of shear deformation results in large amount of low-angle boundaries (LAB) showing the incomplete recrystallization.« less

Clinical comparison of masticatory performance and electromyographic activity of patients with complete dentures, overdentures, and natural teeth.

PubMed

Rissin, L; House, J E; Manly, R S; Kapur, K K

1978-05-01

In this study, which is the first of its kind, it has been shown that overdenture patients, when compared to complete denture patients, while chewing a test food for a constant number of strokes, expended an equivalent amount of muscle effort, chewed more slowly and efficiently, and evidenced significantly better masticatory performance by producing an increased volume of fine test food particles. These findings provide a sound justification for the extra effort required to retain some natural teeth to provide overdenture services to patients. The fact that patients can masticate food more efficiently with overdentures than with complete dentures justifies the increased cost and time involved in their construction. The longitudinal effects that overdentures have on the basic physiopathologic processed involved in the progression of ridge resorption and the advantages of maintaining periodontal proprioception also should be studied.

Dryer cuts fuel usage by equivalent of 6-million scf/yr

DOE Office of Scientific and Technical Information (OSTI.GOV)

List, K.H.; Powers, J.

Drying is an integral part of the production of ZnO pellets, a specific requirement for producing a uniform end product. The dryer has to be able to cure the product for a finite period at temperatures up to 500/sup 0/C in the same unit. Substantial savings have been realized because the dryer has enabled the user to optimize operating conditions. Continuous on-stream operations requiring minimum operator attendance, automatic controls, simplicity of design contruction, and the unit's ability to use waste heat also contribute to these savings. Gas exhausted from a nearby kiln provides the total heat requirement for the dryer.more » Positive delivery of the hot flue gas is assured by a blower and automatically controlled dampers. Annual fuel savings based on the use of waste heat, amounts to an equiv of 6 million scf of natural gas. 1 figure.« less

Chemical composition, antioxidant capacity, and mineral extractability of Sudanese date palm (Phoenix dactylifera L.) fruits

PubMed Central

Mohamed, Rania M A; Fageer, Aisha S M; Eltayeb, Mohamed M; Mohamed Ahmed, Isam A

2014-01-01

The aim of the present work was to investigate the chemical composition, mineral extractability, and antioxidant capacity of six date palm varieties grown in Sudan. The results showed that Sudanese date varieties contained significantly different (P < 0.05) amounts of moisture, ash, fiber, oil, and carbohydrates, but have almost similar amounts of protein. Moreover, results revealed that date varieties contained significantly varied (P < 0.05) amounts of total polyphenols and total flavonoids, which ranged between 35.82 and 99.34 mg gallic acid equivalent/100 g and 1.74–3.39 mg catechin equivalent/100 g, respectively. The antioxidant activities of the studied date varieties were as follows: ferric-reducing antioxidant power (FRAP) was within the range of 2.82–27.5 mmol/100 g, chelation of Fe2+ ion ranged from 54.31% to 94.98%, and scavenging of H2O2 ranged from 38.48% to 49.13%. There were many correlations (positive, negative, and weak) between antioxidant and mineral extractability of Sudanese date fruits. PMID:25473506

A sampling method to determine insecticide residues on surfaces and its application to food-handling establishments.

PubMed

Leidy, R B; Wright, C G; Dupree, H E

1987-07-01

Known amounts of acephate, chlorpyrifos, and diazinon were applied to Formica, unfinished plywood, stainless steel, and vinyl tile. Cotton-ball and dental wick materials were dipped in 2-propanol and "swiped" over the treated surface area two time. More acephate was found on the second swipe compared to the first from vinyl tile, similar amounts on both swipes from plywood, and less on the second swipe from formica and stainless steel. The ratio of chlorpyrifos on Swipe 1 compared to Swipe 2 found with cotton-ball on both formica and stainless steel surfaces was equivalent (6:1), but a considerable difference was seen when two dental wick swipes were used. Residues of diazinon removed from formica and stainless steel were equivalent, regardless of the swiping material used. Residues of chlorpyrifos were detected by taking swipes of surfaces in two restaurants and a supermarket up to 6 mo after a prescribed application by a commercial pest control firm. The data show that measurable amounts of chloropyrifos can be detected on surfaces not treated with the insecticide for at least 6 mo.

Bigeye Bomb: Unresolved Development Issues

DTIC Science & Technology

1989-08-11

the lethal agent formed inside the Bigeye bomb) at the purity or equivalent- biotoxicity level required by the Test and Eval- uation Master Plan (TEMP...during the 5 through 30-second period after mixing starts, with- out specifying either wheit the required purity or equivalent biotoxicity level should...revision of the purity or equivalent biotoxicity requirement. However, we believe that a bomb that produces lethal agent at the required purity level for 1

21 CFR 526.88 - Amoxicillin trihydrate for intramammary infusion.

Code of Federal Regulations, 2010 CFR

2010-04-01

...—Lactating cows—(1) Amount. One syringe (equivalent to 62.5 milligrams amoxicillin) per quarter. (2... doses. Do not use milk taken from treated animals for food purposes within 60 hours (5 milkings) after...

Closed-Loop Control and Advisory Mode Evaluation of an Artificial Pancreatic β Cell: Use of Proportional–Integral–Derivative Equivalent Model-Based Controllers

PubMed Central

Percival, Matthew W.; Zisser, Howard; Jovanovič, Lois; Doyle, Francis J.

2008-01-01

Background Using currently available technology, it is possible to apply modern control theory to produce a closed-loop artificial β cell. Novel use of established control techniques would improve glycemic control, thereby reducing the complications of diabetes. Two popular controller structures, proportional–integral–derivative (PID) and model predictive control (MPC), are compared first in a theoretical sense and then in two applications. Methods The Bergman model is transformed for use in a PID equivalent model-based controller. The internal model control (IMC) structure, which makes explicit use of the model, is compared with the PID controller structure in the transfer function domain. An MPC controller is then developed as an optimization problem with restrictions on its tuning parameters and is shown to be equivalent to an IMC controller. The controllers are tuned for equivalent performance and evaluated in a simulation study as a closed-loop controller and in an advisory mode scenario on retrospective clinical data. Results Theoretical development shows conditions under which PID and MPC controllers produce equivalent output via IMC. The simulation study showed that the single tuning parameter for the equivalent controllers relates directly to the closed-loop speed of response and robustness, an important result considering system uncertainty. The risk metric allowed easy identification of instances of inadequate control. Results of the advisory mode simulation showed that suitable tuning produces consistently appropriate delivery recommendations. Conclusion The conditions under which PID and MPC are equivalent have been derived. The MPC framework is more suitable given the extensions necessary for a fully closed-loop artificial β cell, such as consideration of controller constraints. Formulation of the control problem in risk space is attractive, as it explicitly addresses the asymmetry of the problem; this is done easily with MPC. PMID:19885240

New head equivalent phantom for task and image performance evaluation representative for neurovascular procedures occurring in the Circle of Willis

NASA Astrophysics Data System (ADS)

Ionita, Ciprian N.; Loughran, Brendan; Jain, Amit; Swetadri Vasan, S. N.; Bednarek, Daniel R.; Levy, Elad; Siddiqui, Adnan H.; Snyder, Kenneth V.; Hopkins, L. N.; Rudin, Stephen

2012-03-01

Phantom equivalents of different human anatomical parts are routinely used for imaging system evaluation or dose calculations. The various recommendations on the generic phantom structure given by organizations such as the AAPM, are not always accurate when evaluating a very specific task. When we compared the AAPM head phantom containing 3 mm of aluminum to actual neuro-endovascular image guided interventions (neuro-EIGI) occurring in the Circle of Willis, we found that the system automatic exposure rate control (AERC) significantly underestimated the x-ray parameter selection. To build a more accurate phantom for neuro-EIGI, we reevaluated the amount of aluminum which must be included in the phantom. Human skulls were imaged at different angles, using various angiographic exposures, at kV's relevant to neuro-angiography. An aluminum step wedge was also imaged under identical conditions, and a correlation between the gray values of the imaged skulls and those of the aluminum step thicknesses was established. The average equivalent aluminum thickness for the skull samples for frontal projections in the Circle of Willis region was found to be about 13 mm. The results showed no significant changes in the average equivalent aluminum thickness with kV or mAs variation. When a uniform phantom using 13 mm aluminum and 15 cm acrylic was compared with an anthropomorphic head phantom the x-ray parameters selected by the AERC system were practically identical. These new findings indicate that for this specific task, the amount of aluminum included in the head equivalent must be increased substantially from 3 mm to a value of 13 mm.

Greenhouse gas emissions of different waste treatment options for sector-specific commercial and industrial waste in Germany.

PubMed

Helftewes, Markus; Flamme, Sabine; Nelles, Michael

2012-04-01

This article investigates greenhouse gas (GHG) emissions from commercial and industrial (C&I) waste treatment considering five sector-specific waste compositions and four different treatment scenarios in Germany. Results show that the highest share of CO₂-equivalent emissions can be avoided in each of the analysed industrial sectors if solid recovered fuel (SRF) is produced for co-incineration in cement kilns. Across all industries, emissions of approximately 680 kg CO₂-eq. Mg⁻¹ C&I waste can be avoided on average under this scenario. The combustion of C&I waste in waste incineration plants without any previous mechanical treatment generates the lowest potential to avoid GHG emissions with a value of approximately 50 kg CO₂-eq. Mg⁻¹ C&I waste on average in all industries. If recyclables are sorted, this can save emissions of approximately 280 kg CO₂-eq. Mg⁻¹ C&I waste while the treatment in SRF power plants amounts to savings of approximately 210 kg CO₂-eq. Mg⁻¹ C&I waste. A comparison of the treatment scenarios of the waste from these five sectors shows that waste treatment of the craft sector leads to the lowest CO₂-equivalent reduction rates of all scenarios. In contrast, the treatment of waste from catering sector leads to the highest CO₂-equivalent reduction rates except for direct incineration in waste incineration plants. The sensitivity analysis of the different scenarios for this paper shows that the efficiency and the substitution factor of energy have a relevant influence on the result. Changes in the substitution factor of 10% can result in changes in emissions of approximately 55 to 75 kg CO₂-eq. Mg⁻¹ in waste incineration plants and approximately 90 kg CO₂-eq. Mg⁻¹ in the case of cement kilns.

Improvements in nanoscale zero-valent iron production by milling through the addition of alumina

NASA Astrophysics Data System (ADS)

Ribas, D.; Cernik, M.; Martí, V.; Benito, J. A.

2016-07-01

A new milling procedure for a cost-effective production of nanoscale zero-valent iron for environmental remediation is presented. Conventional ball milling of iron in an organic solvent as Mono Ethylene Glycol produces flattened iron particles that are unlikely to break even after very long milling times. With the aim of breaking down these iron flakes, in this new procedure, further milling is carried out by adding an amount of fine alumina powder to the previously milled solution. As the amount of added alumina increases from 9 to 54 g l-1, a progressive decrease of the presence of flakes is observed. In the latter case, the appearance of the particles formed by fragments of former flakes is rather homogeneous, with most of the final nanoparticles having an equivalent diameter well below 1 µm and with an average particle size in solution of around 400 nm. An additional increase of alumina content results in a highly viscous solution showing worse particle size distribution. Milled particles, in the case of alumina concentrations of 54 g l-1, have a fairly large specific surface area and high Fe(0) content. These new particles show a very good Cr(VI) removal efficiency compared with other commercial products available. This good reactivity is related to the absence of an oxide layer, the large amount of superficial irregularities generated by the repetitive fracture process during milling and the presence of a fine nanostructure within the iron nanoparticles.

7 CFR 1032.13 - Producer milk.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Producer milk. 1032.13 Section 1032.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating Handling Definitions § 1032.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1126.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1126.13 Section 1126.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHWEST MARKETING AREA Order Regulating Handling Definitions § 1126.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1006.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1006.13 Section 1006.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE FLORIDA MARKETING AREA Order Regulating Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1032.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1032.13 Section 1032.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating Handling Definitions § 1032.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1001.13 - Producer milk.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Producer milk. 1001.13 Section 1001.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating Handling Definitions § 1001.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1131.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1131.13 Section 1131.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating Handling Definitions § 1131.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1033.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1033.13 Section 1033.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE MIDEAST MARKETING AREA Order Regulating Handling Definitions § 1033.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1033.13 - Producer milk.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Producer milk. 1033.13 Section 1033.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE MIDEAST MARKETING AREA Order Regulating Handling Definitions § 1033.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1033.13 - Producer milk.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Producer milk. 1033.13 Section 1033.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE MIDEAST MARKETING AREA Order Regulating Handling Definitions § 1033.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1032.13 - Producer milk.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Producer milk. 1032.13 Section 1032.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating Handling Definitions § 1032.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1001.13 - Producer milk.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Producer milk. 1001.13 Section 1001.13 Agriculture... AND ORDERS; MILK), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating Handling Definitions § 1001.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1001.13 - Producer milk.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Producer milk. 1001.13 Section 1001.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating Handling Definitions § 1001.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1131.13 - Producer milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Producer milk. 1131.13 Section 1131.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating Handling Definitions § 1131.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1126.13 - Producer milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Producer milk. 1126.13 Section 1126.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHWEST MARKETING AREA Order Regulating Handling Definitions § 1126.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1006.13 - Producer milk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1006.13 Section 1006.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE FLORIDA MARKETING AREA Order Regulating Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1131.13 - Producer milk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1131.13 Section 1131.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating Handling Definitions § 1131.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1126.13 - Producer milk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1126.13 Section 1126.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHWEST MARKETING AREA Order Regulating Handling Definitions § 1126.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1006.13 - Producer milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Producer milk. 1006.13 Section 1006.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE FLORIDA MARKETING AREA Order Regulating Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

7 CFR 1450.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; diesel-equivalent fuel derived from renewable biomass including vegetable oil and animal fat; biogas.... Equivalent plan means a plan approved by a State or other State agency or government entity that is similar... non-woody perennial crops and woody perennial crops, as specified in a producer contract under the...

7 CFR 1450.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; diesel-equivalent fuel derived from renewable biomass including vegetable oil and animal fat; biogas.... Equivalent plan means a plan approved by a State or other State agency or government entity that is similar... non-woody perennial crops and woody perennial crops, as specified in a producer contract under the...

7 CFR 1450.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... yard waste; diesel-equivalent fuel derived from renewable biomass including vegetable oil and animal... CCC. Equivalent plan means a plan approved by a State or other State agency or government entity that... required for non-woody perennial crops and woody perennial crops, as specified in a producer contract under...

Total reflection infrared spectroscopy of water-ice and frozen aqueous NaCl solutions.

PubMed

Walker, Rachel L; Searles, Keith; Willard, Jesse A; Michelsen, Rebecca R H

2013-12-28

Liquid-like and liquid water at and near the surface of water-ice and frozen aqueous sodium chloride films were observed using attenuated total reflection infrared spectroscopy (ATR-IR). The concentration of NaCl ranged from 0.0001 to 0.01 M and the temperature varied from the melting point of water down to 256 K. The amount of liquid brine at the interface of the frozen films with the germanium ATR crystal increased with salt concentration and temperature. Experimental spectra are compared to reflection spectra calculated for a simplified morphology of a uniform liquid layer between the germanium crystal and the frozen film. This morphology allows for the amount of liquid observed in an experimental spectrum to be converted to the thickness of a homogenous layer with an equivalent amount of liquid. These equivalent thickness ranges from a nanometer for water-ice at 260 K to 170 nm for 0.01 M NaCl close to the melting point. The amounts of brine observed are over an order of magnitude less than the total liquid predicted by equilibrium thermodynamic models, implying that the vast majority of the liquid fraction of frozen solutions may be found in internal inclusions, grain boundaries, and the like. Thus, the amount of liquid and the solutes dissolved in them that are available to react with atmospheric gases on the surfaces of snow and ice are not well described by thermodynamic equilibrium models which assume the liquid phase is located entirely at the surface.

Clinical trials of the prototype Rutherford Appleton Laboratory MWPC positron camera at the Royal Marsden Hospital

NASA Astrophysics Data System (ADS)

Flower, M. A.; Ott, R. J.; Webb, S.; Leach, M. O.; Marsden, P. K.; Clack, R.; Khan, O.; Batty, V.; McCready, V. R.; Bateman, J. E.

1988-06-01

Two clinical trials of the prototype RAL multiwire proportional chamber (MWPC) positron camera were carried out prior to the development of a clinical system with large-area detectors. During the first clinical trial, the patient studies included skeletal imaging using 18F, imaging of brain glucose metabolism using 18F FDG, bone marrow imaging using 52Fe citrate and thyroid imaging with Na 124I. Longitudinal tomograms were produced from the limited-angle data acquisition from the static detectors. During the second clinical trial, transaxial, coronal and sagittal images were produced from the multiview data acquisition. A more detailed thyroid study was performed in which the volume of the functioning thyroid tissue was obtained from the 3D PET image and this volume was used in estimating the radiation dose achieved during radioiodine therapy of patients with thyrotoxicosis. Despite the small field of view of the prototype camera, and the use of smaller than usual amounts of activity administered, the PET images were in most cases comparable with, and in a few cases visually better than, the equivalent planar view using a state-of-the-art gamma camera with a large field of view and routine radiopharmaceuticals.

Observed diurnal variations in Mars Science Laboratory Dynamic Albedo of Neutrons passive mode data

NASA Astrophysics Data System (ADS)

Tate, C. G.; Moersch, J.; Jun, I.; Mitrofanov, I.; Litvak, M.; Boynton, W. V.; Drake, D.; Fedosov, F.; Golovin, D.; Hardgrove, C.; Harshman, K.; Kozyrev, A. S.; Kuzmin, R.; Lisov, D.; Maclennan, E.; Malakhov, A.; Mischna, M.; Mokrousov, M.; Nikiforov, S.; Sanin, A. B.; Starr, R.; Vostrukhin, A.

2018-06-01

The Mars Science Laboratory Dynamic Albedo of Neutrons (DAN) experiment measures the martian neutron leakage flux in order to estimate the amount of water equivalent hydrogen present in the shallow regolith. When DAN is operating in passive mode, it is sensitive to neutrons produced through the interactions of galactic cosmic rays (GCR) with the regolith and atmosphere and neutrons produced by the rover's Multi-Mission Radioisotope Thermoelectric Generator (MMRTG). During the mission, DAN passive mode data were collected over the full diurnal cycle at the locations known as Rocknest (sols 60-100) and John Klein (sols 166-272). A weak, but unexpected, diurnal variation was observed in the neutron count rates reported at these locations. We investigate different hypotheses that could be causing these observed variations. These hypotheses are variations in subsurface temperature, atmospheric pressure, the exchange of water vapor between the atmosphere and regolith, and instrumental effects on the neutron count rates. Our investigation suggests the most likely factors contributing to the observed diurnal variations in DAN passive data are instrumental effects and time-variable preferential shielding of alpha particles, with other environmental effects only having small contributions.

Venezuela natural gas for vehicles project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marsicobetre, D.; Molero, T.

1998-12-31

The Natural Gas for Vehicles (NGV) Project in Venezuela describes the development and growth of the NGV project in the country. Venezuela is a prolific oil producer with advanced exploration, production, refining and solid marketing infrastructure. Gas production is 5.2 Bscfd. The Venezuelan Government and the oil state owned company Petroleos de Venezuela (PDVSA), pursued the opportunity of using natural gas for vehicles based on the huge amounts of gas reserves present and produced every day associated with the oil production. A nationwide gas pipeline network crosses the country from south to west reaching the most important cities and servingmore » domestic and industrial purposes but there are no facilities to process or export liquefied natural gas. NGV has been introduced gradually in Venezuela over the last eight years by PDVSA. One hundred forty-five NGV stations have been installed and another 25 are under construction. Work done comprises displacement or relocation of existing gasoline equipment, civil work, installation and commissioning of equipment. The acceptance and usage of the NGV system is reflected in the more than 17,000 vehicles that have been converted to date using the equivalent of 2,000 bbl oil/day.« less

Conditioning of dilute-acid pretreated corn stover hydrolysate liquors by treatment with lime or ammonium hydroxide to improve conversion of sugars to ethanol.

PubMed

Jennings, Edward W; Schell, Daniel J

2011-01-01

Dilute-acid pretreatment of lignocellulosic biomass enhances the ability of enzymes to hydrolyze cellulose to glucose, but produces many toxic compounds that inhibit fermentation of sugars to ethanol. The objective of this study was to compare the effectiveness of treating hydrolysate liquor with Ca(OH)2 and NH4OH for improving ethanol yields. Corn stover was pretreated in a pilot-scale reactor and then the liquor fraction (hydrolysate) was extracted and treated with various amounts of Ca(OH)2 or NH4OH at several temperatures. Glucose and xylose in the treated liquor were fermented to ethanol using a glucose-xylose fermenting bacteria, Zymomonas mobilis 8b. Sugar losses up to 10% occurred during treatment with Ca(OH)2, but these losses were two to fourfold lower with NH4OH treatment. Ethanol yields for NH4OH-treated hydrolysate were 33% greater than those achieved in Ca(OH)2-treated hydrolysate and pH adjustment to either 6.0 or 8.5 with NH4OH prior to fermentation produced equivalent ethanol yields. Copyright © 2010 Elsevier Ltd. All rights reserved.

Equivalent modulus method for finite element simulation of the sound absorption of anechoic coating backed with orthogonally rib-stiffened plate

NASA Astrophysics Data System (ADS)

Jin, Zhongkun; Yin, Yao; Liu, Bilong

2016-03-01

The finite element method is often used to investigate the sound absorption of anechoic coating backed with orthogonally rib-stiffened plate. Since the anechoic coating contains cavities, the number of grid nodes of a periodic unit cell is usually large. An equivalent modulus method is proposed to reduce the large amount of nodes by calculating an equivalent homogeneous layer. Applications of this method in several models show that the method can well predict the sound absorption coefficient of such structure in a wide frequency range. Based on the simulation results, the sound absorption performance of such structure and the influences of different backings on the first absorption peak are also discussed.

Electrochemically reduced water exerts superior reactive oxygen species scavenging activity in HT1080 cells than the equivalent level of hydrogen-dissolved water

PubMed Central

Hamasaki, Takeki; Harada, Gakuro; Nakamichi, Noboru; Kabayama, Shigeru; Teruya, Kiichiro; Fugetsu, Bunshi; Gong, Wei; Sakata, Ichiro; Shirahata, Sanetaka

2017-01-01

Electrochemically reduced water (ERW) is produced near a cathode during electrolysis and exhibits an alkaline pH, contains richly dissolved hydrogen, and contains a small amount of platinum nanoparticles. ERW has reactive oxygen species (ROS)-scavenging activity and recent studies demonstrated that hydrogen-dissolved water exhibits ROS-scavenging activity. Thus, the antioxidative capacity of ERW is postulated to be dependent on the presence of hydrogen levels; however, there is no report verifying the role of dissolved hydrogen in ERW. In this report, we clarify whether the responsive factor for antioxidative activity in ERW is dissolved hydrogen. The intracellular ROS scavenging activity of ERW and hydrogen-dissolved water was tested by both fluorescent stain method and immuno spin trapping assay. We confirm that ERW possessed electrolysis intensity-dependent intracellular ROS-scavenging activity, and ERW exerts significantly superior ROS-scavenging activity in HT1080 cells than the equivalent level of hydrogen-dissolved water. ERW retained its ROS-scavenging activity after removal of dissolved hydrogen, but lost its activity when autoclaved. An oxygen radical absorbance capacity assay, the 2,2-diphenyl-1-picrylhydrazyl assay and chemiluminescence assay could not detect radical-scavenging activity in both ERW and hydrogen-dissolved water. These results indicate that ERW contains electrolysis-dependent hydrogen and an additional antioxidative factor predicted to be platinum nanoparticles. PMID:28182635

Exploring community pharmacists' views on generic medicines: a nationwide study from Malaysia.

PubMed

Chong, Chee Ping; Hassali, Mohamed Azmi; Bahari, Mohd Baidi; Shafie, Asrul Akmal

2011-02-01

To evaluate the Malaysian community pharmacists' views on generic medicines. A sample of 1419 Malaysian community pharmacies with resident pharmacists. A cross-sectional nationwide survey using a self-completed mailing questionnaire. Pharmacists' views on generic medicines including issues surrounding efficacy, safety, quality and bioequivalence. Responses were received from 219 pharmacies (response rate 15.4%). Only 50.2% of the surveyed pharmacists agreed that all products that are approved as generic equivalents can be considered therapeutically equivalent with the innovator medicines. Around 76% of respondents indicated that generic substitution of narrow therapeutic index medicines is inappropriate. The majority of the pharmacists understood that a generic medicine must contain the same amount of active ingredient (84.5%) and must be in the same dosage form as the innovator brand (71.7%). About 21% of respondents though that generic medicines are of inferior quality compared to innovator medicines. Most of the pharmacists (61.6%) disagreed that generic medicines produce more side-effects than innovator brand. Pharmacists graduated from Malaysian universities, twinning program and overseas universities were not differed significantly in their views on generic medicines. Additionally, the respondents appeared to have difficulty in ascertaining the bioequivalent status of the marketed generic products in Malaysia. The Malaysian pharmacists' have lack of information and/or trust in the generic manufacturing and/or approval system in Malaysia. This issue should be addressed by pharmacy educators and relevant government agencies.

Electrochemically reduced water exerts superior reactive oxygen species scavenging activity in HT1080 cells than the equivalent level of hydrogen-dissolved water.

PubMed

Hamasaki, Takeki; Harada, Gakuro; Nakamichi, Noboru; Kabayama, Shigeru; Teruya, Kiichiro; Fugetsu, Bunshi; Gong, Wei; Sakata, Ichiro; Shirahata, Sanetaka

2017-01-01

Electrochemically reduced water (ERW) is produced near a cathode during electrolysis and exhibits an alkaline pH, contains richly dissolved hydrogen, and contains a small amount of platinum nanoparticles. ERW has reactive oxygen species (ROS)-scavenging activity and recent studies demonstrated that hydrogen-dissolved water exhibits ROS-scavenging activity. Thus, the antioxidative capacity of ERW is postulated to be dependent on the presence of hydrogen levels; however, there is no report verifying the role of dissolved hydrogen in ERW. In this report, we clarify whether the responsive factor for antioxidative activity in ERW is dissolved hydrogen. The intracellular ROS scavenging activity of ERW and hydrogen-dissolved water was tested by both fluorescent stain method and immuno spin trapping assay. We confirm that ERW possessed electrolysis intensity-dependent intracellular ROS-scavenging activity, and ERW exerts significantly superior ROS-scavenging activity in HT1080 cells than the equivalent level of hydrogen-dissolved water. ERW retained its ROS-scavenging activity after removal of dissolved hydrogen, but lost its activity when autoclaved. An oxygen radical absorbance capacity assay, the 2,2-diphenyl-1-picrylhydrazyl assay and chemiluminescence assay could not detect radical-scavenging activity in both ERW and hydrogen-dissolved water. These results indicate that ERW contains electrolysis-dependent hydrogen and an additional antioxidative factor predicted to be platinum nanoparticles.

Building a Library for Microelectronics Verification with Topological Constraints

DTIC Science & Technology

2017-03-01

Tables 1d, 3b); 1-bit full adder cell (Fig. 1), respectively. Table 5. Frequency distributions for the genus of logically equivalent circuit...Figure 1 shows that switching signal pairs produces logically- equivalent topologies of the 1-bit full adder cell with three values of the genus (g = 3 [1...case], 4, 5, 6). Figure 1. Frequency distribution for logically equivalent circuit topologies of the 1-bit full adder cell (2048) in Table 1(e

40 CFR 90.423 - Exhaust gas analytical system; CVS grab sample.

Code of Federal Regulations, 2012 CFR

2012-07-01

... detector (HFID) for the measurement of hydrocarbons, non-dispersive infrared analyzers (NDIR) for the... converted to nitric oxide before analysis. Other types of analyzers may be used if shown to yield equivalent... room temperature, produces an equivalent CO response, as measured on the most sensitive CO range, which...

40 CFR 90.423 - Exhaust gas analytical system; CVS grab sample.

Code of Federal Regulations, 2010 CFR

2010-07-01

... detector (HFID) for the measurement of hydrocarbons, non-dispersive infrared analyzers (NDIR) for the... converted to nitric oxide before analysis. Other types of analyzers may be used if shown to yield equivalent... room temperature, produces an equivalent CO response, as measured on the most sensitive CO range, which...

Characterization of the secondary neutron field produced during treatment of an anthropomorphic phantom with x-rays, protons and carbon ions

NASA Astrophysics Data System (ADS)

La Tessa, C.; Berger, T.; Kaderka, R.; Schardt, D.; Burmeister, S.; Labrenz, J.; Reitz, G.; Durante, M.

2014-04-01

Short- and long-term side effects following the treatment of cancer with radiation are strongly related to the amount of dose deposited to the healthy tissue surrounding the tumor. The characterization of the radiation field outside the planned target volume is the first step for estimating health risks, such as developing a secondary radioinduced malignancy. In ion and high-energy photon treatments, the major contribution to the dose deposited in the far-out-of-field region is given by neutrons, which are produced by nuclear interaction of the primary radiation with the beam line components and the patient’s body. Measurements of the secondary neutron field and its contribution to the absorbed dose and equivalent dose for different radiotherapy technologies are presented in this work. An anthropomorphic RANDO phantom was irradiated with a treatment plan designed for a simulated 5 × 2 × 5 cm3 cancer volume located in the center of the head. The experiment was repeated with 25 MV IMRT (intensity modulated radiation therapy) photons and charged particles (protons and carbon ions) delivered with both passive modulation and spot scanning in different facilities. The measurements were performed with active (silicon-scintillation) and passive (bubble, thermoluminescence 6LiF:Mg, Ti (TLD-600) and 7LiF:Mg, Ti (TLD-700)) detectors to investigate the production of neutral particles both inside and outside the phantom. These techniques provided the whole energy spectrum (E ⩽ 20 MeV) and corresponding absorbed dose and dose equivalent of photo neutrons produced by x-rays, the fluence of thermal neutrons for all irradiation types and the absorbed dose deposited by neutrons with 0.8 < E < 10 MeV during the treatment with scanned carbon ions. The highest yield of thermal neutrons is observed for photons and, among ions, for passively modulated beams. For the treatment with high-energy x-rays, the contribution of secondary neutrons to the dose equivalent is of the same order of magnitude as the primary radiation. In carbon therapy delivered with raster scanning, the absorbed dose deposited by neutrons in the energy region between 0.8 and 10 MeV is almost two orders of magnitude lower than charged fragments. We conclude that, within the energy range explored in this experimental work, the out-of-field dose from secondary neutrons is lowest for ions delivered by scanning, followed by passive modulation, and finally by high-energy IMRT photons.

Characterization of the secondary neutron field produced during treatment of an anthropomorphic phantom with x-rays, protons and carbon ions.

PubMed

Tessa, C La; Berger, T; Kaderka, R; Schardt, D; Burmeister, S; Labrenz, J; Reitz, G; Durante, M

2014-04-21

Short- and long-term side effects following the treatment of cancer with radiation are strongly related to the amount of dose deposited to the healthy tissue surrounding the tumor. The characterization of the radiation field outside the planned target volume is the first step for estimating health risks, such as developing a secondary radioinduced malignancy. In ion and high-energy photon treatments, the major contribution to the dose deposited in the far-out-of-field region is given by neutrons, which are produced by nuclear interaction of the primary radiation with the beam line components and the patient's body. Measurements of the secondary neutron field and its contribution to the absorbed dose and equivalent dose for different radiotherapy technologies are presented in this work. An anthropomorphic RANDO phantom was irradiated with a treatment plan designed for a simulated 5 × 2 × 5 cm³ cancer volume located in the center of the head. The experiment was repeated with 25 MV IMRT (intensity modulated radiation therapy) photons and charged particles (protons and carbon ions) delivered with both passive modulation and spot scanning in different facilities. The measurements were performed with active (silicon-scintillation) and passive (bubble, thermoluminescence ⁶LiF:Mg, Ti (TLD-600) and ⁷LiF:Mg, Ti (TLD-700)) detectors to investigate the production of neutral particles both inside and outside the phantom. These techniques provided the whole energy spectrum (E ≤ 20 MeV) and corresponding absorbed dose and dose equivalent of photo neutrons produced by x-rays, the fluence of thermal neutrons for all irradiation types and the absorbed dose deposited by neutrons with 0.8 < E < 10 MeV during the treatment with scanned carbon ions. The highest yield of thermal neutrons is observed for photons and, among ions, for passively modulated beams. For the treatment with high-energy x-rays, the contribution of secondary neutrons to the dose equivalent is of the same order of magnitude as the primary radiation. In carbon therapy delivered with raster scanning, the absorbed dose deposited by neutrons in the energy region between 0.8 and 10 MeV is almost two orders of magnitude lower than charged fragments. We conclude that, within the energy range explored in this experimental work, the out-of-field dose from secondary neutrons is lowest for ions delivered by scanning, followed by passive modulation, and finally by high-energy IMRT photons.

Effects of Radiation and Temperature on Iodide Sorption by Surfactant-Modified Bentonite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choung, Sungwook; Kim, Min Kyung; Yang, Jungseok

2014-08-04

Bentonite, which is used as an engineered barrier in geological repositories, is ineffective for sorbing anionic radionuclides because of its negatively charged surface. This study modified raw bentonite using a cationic surfactant (i.e., hexadecyltrimethylammonium [HDTMA]-Br) to improve its sorption capability for radioactive iodide. The effects of temperature and radiation on the iodide sorption of surfactant-modified bentonite (SMB) were evaluated under alkaline pH condition similar to that found in repository environments. Different amounts of surfactant, equivalent to the 50, 100, and 200% cation-exchange capacity of the bentonite, were used to produce the HDTMA-SMB for iodide sorption. The sorption reaction of themore » SMB with iodide reached equilibrium rapidly within 10 min regardless of temperature and radiation conditions. The rate of iodide sorption increased as the amount of the added surfactant was increased and nonlinear sorption behavior was exhibited. However, high temperature and γ-irradiation (60Co) resulted in significantly (~2–10 times) lower iodide Kd values for the SMB. The results of Fourier transform infrared spectroscopy analysis suggested that the decrease in iodide sorption may be caused by weakened physical electrostatic force between the HDTMA and iodide, and by the surfactant becoming detached from the SMB during the heating and irradiation processes.« less

Adhesive Properties of Cured Phenylethynyl Containing Imides

NASA Technical Reports Server (NTRS)

Jensen, Brian J.; Chang, Alice C.

1997-01-01

Considerable attention has been directed towards acetylene terminated oligomers over the last 20 years' and recent work has focused on phenylethynyl terminated imide (PETI) oligomers. These reactive oligomers possess several features which make them attractive candidates for use as composite matrices and adhesives. The phenylethynyl group can be readily incorporated into many different functionalized oligomers. The reactive oligomers possess relatively low melt viscosities and thermally cure without the evolution of volatile by-products. Once cured, they typically display high glass transition temperatures (Tgs), excellent solvent resistance and high mechanical properties. new modified phenylethynyl-terminated imide (LaRC MPEI) oligomers were synthesized at various molecular weights utilizing a small amount of trifunctional amine. As long as the amount of triamine is relatively small, this approach produces a mixture of linear, star-shaped and branched polymer chains that has lower melt and solution viscosity than an equivalent molecular weight linear phenylethynyl terminated imide oligomers. The work reported herein involves the synthesis and characterization of a copolymer using this approach and the preparation of blends utilizing a phenylethynyl containing reactive plasticizer of lower molecular weight called LaRC LV-121. The chemistry and properties of this new MPEI as well as some blends of MPEI with LV-121, are presented and compared to the linear version, LARC-PETI-5.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Shang-Lung; Chu, Tieh-Chi; Lin, Yung-Chien

Purpose: Polymethylmethacrylate (PMMA) slab is one of the mostly used phantoms for studying breast dosimetry in mammography. The purpose of this study was to evaluate the equivalence between exposure factors acquired from PMMA slabs and patient cases of different age groups of Taiwanese women in mammography. Methods: This study included 3910 craniocaudal screen/film mammograms on Taiwanese women acquired on one mammographic unit. The tube loading, compressed breast thickness (CBT), compression force, tube voltage, and target/filter combination for each mammogram were collected for all patients. The glandularity and the equivalent thickness of PMMA were determined for each breast using the exposuremore » factors of the breast in combination with experimental measurements from breast-tissue-equivalent attenuation slabs. Equivalent thicknesses of PMMA to the breasts of Taiwanese women were then estimated. Results: The average {+-} standard deviation CBT and breast glandularity in this study were 4.2 {+-} 1.0 cm and 54% {+-} 23%, respectively. The average equivalent PMMA thickness was 4.0 {+-} 0.7 cm. PMMA slabs producing equivalent exposure factors as in the breasts of Taiwanese women were determined for the age groups 30-49 yr and 50-69 yr. For the 4-cm PMMA slab, the CBT and glandularity values of the equivalent breast were 4.1 cm and 65%, respectively, for the age group 30-49 yr and 4.4 cm and 44%, respectively, for the age group 50-69 yr. Conclusions: The average thickness of PMMA slabs producing the same exposure factors as observed in a large group of Taiwanese women is less than that reported for American women. The results from this study can provide useful information for determining a suitable thickness of PMMA for mammographic dose survey in Taiwan. The equivalence of PMMA slabs and the breasts of Taiwanese women is provided to allow average glandular dose assessment in clinical practice.« less

Quantifying precambrian crustal extraction: The root is the answer

USGS Publications Warehouse

Abbott, D.; Sparks, D.; Herzberg, C.; Mooney, W.; Nikishin, A.; Zhang, Y.-S.

2000-01-01

We use two different methods to estimate the total amount of continental crust that was extracted by the end of the Archean and the Proterozoic. The first method uses the sum of the seismic thickness of the crust, the eroded thickness of the crust, and the trapped melt within the lithospheric root to estimate the total crustal volume. This summation method yields an average equivalent thickness of Archean crust of 49 ?? 6 km and an average equivalent thickness of Proterozoic crust of 48 ?? 9 km. Between 7 and 9% of this crust never reached the surface, but remained within the continental root as congealed, iron-rich komatiitic melt. The second method uses experimental models of melting, mantle xenolith compositions, and corrected lithospheric thickness to estimate the amount of crust extracted through time. This melt column method reveals that the average equivalent thickness of Archean crust was 65 ?? 6 km. and the average equivalent thickness of Early Proterozoic crust was 60 ?? 7 km. It is likely that some of this crust remained trapped within the lithospheric root. The discrepancy between the two estimates is attributed to uncertainties in estimates of the amount of trapped, congealed melt, overall crustal erosion, and crustal recycling. Overall, we find that between 29 and 45% of continental crust was extracted by the end of the Archean, most likely by 2.7 Ga. Between 51 and 79% of continental crust was extracted by the end of the Early Proterozoic, most likely by 1.8-2.0 Ga. Our results are most consistent with geochemical models that call upon moderate amounts of recycling of early extracted continental crust coupled with continuing crustal growth (e.g. McLennan, S.M., Taylor, S.R., 1982. Geochemical constraints on the growth of the continental crust. Journal of Geology, 90, 347-361; Veizer, J., Jansen, S.L., 1985. Basement and sedimentary recycling - 2: time dimension to global tectonics. Journal of Geology 93(6), 625-643). Trapped, congealed, iron-rich melt within the lithospheric root may represent some of the iron that is 'missing' from the lower crust. The lower crust within Archean cratons may also have an unexpectedly low iron content because it was extracted from more primitive, undepleted mantle. (C) 2000 Elsevier Science B.V. All rights reserved.

Galactagogue effects of Musa x paradisiaca flower extract on lactating rats.

PubMed

Mahmood, Azizah; Omar, Muhammad Nor; Ngah, Nurziana

2012-11-01

To investigate the potential of Musa x paradisiaca (M. x paradisiaca) flower extracts in promoting milk production of lactating rats and its effects on growth of the suckling pups. Galactagogue activity was evaluated in terms of quantity of milk produced from the rats treated with petroleum ether, ethanol or water extracts of the flower. Lactating rats (n = 5) of Spraque Dawley with six pups each were administered with the extracts in the amount of 500 mg/kg body weight, while the control rats were given an equivalent amount of distilled water. The rats were daily administered via oral feeding starting from Day 5 until Day 14 and the performance of milk production was measured along the experimental period by weight-suckle-weight method. Results were statistically analyzed using SPSS by means of ANOVA at 0.05 and was expressed as their mean?standard deviation. The rates of pups' growth were measured as the weight gain along the experimental period. The rats treated with aqueous extract produced higher milk than control and ethanol groups. Aqueous extract was identified to increase milk production by 25%, while petroleum ether extract by 18%. The mean of yields produced by the rats during suckling period for aqueous, petroleum ether, ethanol and control were 4.62±2.45, 4.37±1.93, 3.65±1.89 and 3.69±1.79, respectively. Growth rates of pups for the rats treated with control, aqueous, ethanol extract and petroleum ether were (1.85±0.49), (1.78±0.56), (1.65±0.46) and (1.56±0.42) g/pup, respectively. The present study reveals the potential of M. x paradisiaca flower to enhance milk production of nursing mothers which could be exploited for commercialization of the isolated extract. Copyright © 2012 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

Enhanced superoxide anion production in activated peritoneal macrophages from English sole (Pleuronectes vetulus) exposed to PACs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clemons, E.; Arkoosh, M.; Casillas, E.

In fish, as in mammals, macrophages play a vital role in the destruction of infective organisms. The purpose of this study was to determine if peritoneal macrophages (M{O}s) from English sole (Pleuronectes vetulus), a marine benthic fish, have an altered ability to produce cytotoxic reactive oxygen intermediates (ROIs) after exposure to polycyclic aromatic compounds (PACs). ROIs are the principle product of M{O}s used to destroy engulfed organisms. Assay conditions, including the concentration of M{O}s, type of in vitro stimulant, tissue culture media, and incubation time were optimized to measure the production of superoxide anion (O{sub 2}{minus}), the progenitor ROI, inmore » English sole M{O}s. English sole were injected with an organic solvent extract of a PAH-contaminated sediment, equivalent to 20g sediment/kg fish, via their dorsal lymphatic sinus, and peritoneal M{O}s were harvested on days 1, 3, 5, 7, and 14 post injection. Activated peritoneal M{O}s from English sole injected with the sediment extract produced significantly more superoxide radicals after stimulation in vitro with either opsonized zymosan (OZ) or phorbol myristate acetate (PMA) than the vehicle injected or control fish. Specifically, activated peritoneal M{O}s stimulated with PMA in vitro produced greater amounts (compared to controls) of O{sub 2}{minus} on days 7 and 14 after exposure, whereas the same cells stimulated with OZ showed heightened production only on day 7 after exposure. No differences in the basal amounts of O{sub 2}{minus} production from activated peritoneal M{O}s between the treatment groups were observed. This study shows that exposure of English sole to PACs altered production of O{sub 2}{minus} by macrophages, however, the consequence to the immunocompetence of exposed fish remains to be elucidated.« less

Hollow microspheres of silica glass and method of manufacture

DOEpatents

Downs, Raymond L.; Miller, Wayne J.

1982-01-01

A method of manufacturing gel powder suitable for use as a starting material in the manufacture of hollow glass microspheres having a high concentration of silica. The powder is manufactured from a gel containing boron in the amount of about 1% to 20% (oxide equivalent mole percent), alkali metals, specifically potassium and sodium, in an amount exceeding 8% total, and the remainder silicon. Preferably, the ratio of potassium to sodium is greater than 1.5.

The Even-Rho and Even-Epsilon Algorithms for Accelerating Convergence of a Numerical Sequence

DTIC Science & Technology

1981-12-01

equal, leading to zero or very small divisors. Computer programs implementing these algorithms are given along with sample output. An appreciable amount...calculation of the array of Shank’s transforms or, -A equivalently, of the related Padd Table. The :other, the even-rho algorithm, is closely related...leading to zero or very small divisors. Computer pro- grams implementing these algorithms are given along with sample output. An appreciable amount or

Study on Alternative Cargo Launch Options from the Lunar Surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheryl A. Blomberg; Zamir A. Zulkefli; Spencer W. Rich

In the future, there will be a need for constant cargo launches from Earth to Mars in order to build, and then sustain, a Martian base. Currently, chemical rockets are used for space launches. These are expensive and heavy due to the amount of necessary propellant. Nuclear thermal rockets (NTRs) are the next step in rocket design. Another alternative is to create a launcher on the lunar surface that uses magnetic levitation to launch cargo to Mars in order to minimize the amount of necessary propellant per mission. This paper investigates using nuclear power for six different cargo launching alternatives,more » as well as the orbital mechanics involved in launching cargo to a Martian base from the moon. Each alternative is compared to the other alternative launchers, as well as compared to using an NTR instead. This comparison is done on the basis of mass that must be shipped from Earth, the amount of necessary propellant, and the number of equivalent NTR launches. Of the options, a lunar coil launcher had a ship mass that is 12.7% less than the next best option and 17 NTR equivalent launches, making it the best of the presented six options.« less

EXPERIMENTAL RICKETS IN RATS

PubMed Central

Pappenheimer, A. M.; McCann, G. F.; Zucker, T. F.

1922-01-01

1. Casein phosphorus does not completely prevent the development of rickets when substituted in Diet 84 in amount equivalent to a protective dose of basic potassium phosphate. 2. The protection given by lecithin is equivalent to its phosphorus content. 3. The protection given by yeast is at least proportional to its phosphorus content. An amount carrying sufficient vitamine B to promote growth, but insufficient to provide adequate phosphorus, does not prevent rickets. 4. Vitamine A, in the form of butter or butter fat to the amount of 10 per cent of the diet, neither prevents nor cures rickets. 5. The substitution of 10 per cent of egg albumin in Diet 84 improves the nutrition, but does not prevent rickets. 6. The addition of meat to Diet 84, thereby supplying an abundance of phosphorus, promotes normal growth and normal bone formation. A diet consisting solely of meat and flour is inadequate for proper growth, and leads to changes in the bones comparable with those observed on a diet low in calcium, but rich in phosphorus. 7. A diet has been found which contains the necessary food elements for approximately normal growth, and in which the only known deficiency is phosphorus. This leads regularly to the production of rickets. PMID:19868618

76 FR 28852 - Agency Information Collection (Regulation for Submission of Evidence); Activity Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... that is liable for reimbursing VA for care and services VA provided to veterans with non-service... demonstrating its equivalent private sector provider payment amount for the same care or services VA provided...

The wave-equivalent of the Black-Scholes option price: an interpretation

NASA Astrophysics Data System (ADS)

Haven, Emmanuel

2004-12-01

We propose an interpretation of the wave-equivalent of the Black-Scholes option price. We consider Nelson's version of the Brownian motion (Dynamical Theories of Brownian Motion, Princeton University Press, Princeton, NJ, 1967) and we use this specific motion as an input to produce a Black-Scholes PDE with a risk premium.

Occurrences and sources of Differential Item Functioning (DIF) in patient-reported outcome measures: Description of DIF methods, and review of measures of depression, quality of life and general health

PubMed Central

Teresi, Jeanne A.; Ramirez, Mildred; Lai, Jin-Shei; Silver, Stephanie

2009-01-01

Examination of the equivalence of measures involves several levels, including conceptual equivalence of meaning, as well as quantitative tests of differential item functioning (DIF). The purpose of this review is to examine DIF in patient-reported outcomes. Reviewed were measures of self-reported depression, quality of life (QoL) and general health. Most measures of depression contained large amounts of DIF, and the impact of DIF at the scale level was typically sizeable. The studies of QoL and health measures identified a moderate amount of DIF; however, many of these studies examined only one type of DIF (uniform). Relative to DIF analyses of depression measures, less analysis of the impact of DIF on QoL and health measures was performed, and the authors of these analyses generally did not recommend remedial action, with one notable exception. While these studies represent good beginning efforts to examine measurement equivalence in patient-reported outcome measures, more cross-validation work is required using other (often larger) samples of different ethnic and language groups, as well as other methods that permit more extensive analyses of the type of DIF, together with magnitude and impact. PMID:20165561

Changes in sleep quality of athletes under normobaric hypoxia equivalent to 2,000-m altitude: a polysomnographic study.

PubMed

Hoshikawa, Masako; Uchida, Sunao; Sugo, Takayuki; Kumai, Yasuko; Hanai, Yoshiteru; Kawahara, Takashi

2007-12-01

This study evaluated the sleep quality of athletes in normobaric hypoxia at a simulated altitude of 2,000 m. Eight male athletes slept in normoxic condition (NC) and hypoxic conditions equivalent to those at 2,000-m altitude (HC). Polysomnographic recordings of sleep included the electroencephalogram (EEG), electrooculogram, chin surface electromyogram, and electrocardiogram. Thoracic and abdominal motion, nasal and oral airflow, and arterial blood oxygen saturation (Sa(O(2))) were also recorded. Standard visual sleep stage scoring and fast Fourier transformation analyses of the EEG were performed on 30-s epochs. Subjective sleepiness and urinary catecholamines were also monitored. Mean Sa(O(2)) decreased and respiratory disturbances increased with HC. The increase in respiratory disturbances was significant, but the increase was small and subclinical. The duration of slow-wave sleep (stage 3 and 4) and total delta power (<3 Hz) of the all-night non-rapid eye movement sleep EEG decreased for HC compared with NC. Subjective sleepiness and amounts of urinary catecholamines did not differ between the conditions. These results indicate that acute exposure to normobaric hypoxia equivalent to that at 2,000-m altitude decreased slow-wave sleep in athletes, but it did not change subjective sleepiness or amounts of urinary catecholamines.

Study of UV cloud modification factors in Southern Patagonia

NASA Astrophysics Data System (ADS)

Wolfram, Elian A.; Orte, Facundo; Salvador, Jacobo; Quiroga, Jonathan; D'Elia, Raúl; Antón, Manuel; Alados-Arboledas, Lucas; Quel, Eduardo

2017-02-01

Anthropogenic perturbation of the ozone layer has induced change in the amount of UV radiation that reaches the Earth's surface, mainly through the Antarctic ozone hole, making the ozone and ultraviolet (UV) radiation two important issues in the study of Earth atmosphere in the scientific community. Also the clouds have been identified as the main modulator of UV amount in short time scales and produce the main source of uncertainty in the projection of surface UV level as consequence of projected ozone recovery. While clouds can decrease direct radiation, they can produce an increase in the diffuse component, and as consequence the surface UV radiation may be higher than an equivalent clear sky scenario for several minutes. In particular this situation can be important when low ozone column and partially cloud cover skies happen simultaneously. These situations happen frequently in southern Patagonia, where the CEILAP Lidar Division has established the Atmospheric Observatory of Southern Patagonia, an atmospheric remote sensing site near the city of Río Gallegos (51°55'S, 69°14'W). In this paper, the impact of clouds over the UV radiation is investigated by the use of ground based measurements from the passive remote sensing instruments operating at this site, mainly of broad and moderate narrow band filter radiometers. We analyzed the UV Index obtained from a multiband filter radiometer GUV-541 (UVI) [Biospherical Inc.] installed in the Observatorio Atmosférico de la Patagonia Austral, Río Gallegos, since 2005. Cloud modification factors (CMF, ratio between the measured UV radiation in a cloudy sky and the simulated radiation under cloud-free conditions) are evaluated for the study site. The database used in this work covers the period 2005-2012 for spring and summer seasons, when the ozone hole can affect these subpolar regions. CMF higher than 1 are found during spring and summer time, when lower total ozone columns, higher solar elevations and high cloud cover occur simultaneously, producing extreme erythemal irradiance at ground surface. Enhancements as high as 25% were registered. The maximum duration of the enhancement was around 30 minute. This produces dangerous sunbathing situations for the Río Gallegos citizen.

Alternative Process for Manufacturing of Thin Layers of Boron for Neutron Measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Auge, Gregoire; Partyka, Stanislas; Guerard, Bruno

Due to the worldwide shortage of helium 3, Boron-lined proportional counters are developed intensively by several groups. Up to now, thin boron containing layers for neutron detectors are essentially produced by sputtering of boron carbide (B{sub 4}C). This technology provides high quality films but it is slow and expensive. Our paper describes a novel and inexpensive technology for producing boron layers. This technology is based on chemical synthesis of boron 10 nanoparticles, and on electrophoretic deposition of these particles on metallic plates, or on metallic pieces with more complex shapes. The chemical synthesis consists in: - Heating boron 10 withmore » lithium up to 700 deg. C under inert atmosphere: an intermetallic compound, LiB, is produced; - Hydrolysing this intermetallic compound: LiB + H{sub 2}O → B + Li{sup +} + OH{sup -} + 1/2H{sub 2}, where B is under the form of nanoparticles; - Purifying the suspension of boron nanoparticles in water, from lithium hydroxide, by successive membrane filtrations; - Evaporating the purified suspension, in order to get a powder of nanoparticles. The obtained nanoparticles have size around 300 nm, with a high porosity, of about 50%. This particle size is equivalent to about 150 nm massive particles. The nanoparticles are then put into suspension in a specific solvent, in order to perform deposition on metallic surfaces, by electrophoretic method. The solvent is chosen so that it is not electrolysed even under voltages of several tens of volts. An acid is dissolved into the solvent, so that the nanoparticles are positively charged. Deposition is performed on the cathode within about 10 min. The cathode could be an aluminium plate, or a nickel coated aluminium plate. Homogeneous deposition may also be performed on complex shapes, like grids in a Multigrid detector. A large volume of pieces, can be coated with a Boron-10 film in a few hours. The thickness of the layer can be adjusted according to the required neutron detection characteristics, between 0,5 to 5 μm (equivalent to 0,25 to 2.5 massive layer). The thickness is homogenous within a ±20% range. The layer is an almost pure {sup 10}B layer (90%). The ratio of the amount of deposed boron 10 to the amount of raw boron 10 used is more than 80%. Hence, another advantage of this technique is that Boron 10 will be deposited on the cathodes only, without loss of this expensive material. 2 grids of a Multi-Grid detector have been coated with pure Boron by using this technique. The film structure has been analysed with a microscope and the detector has been tested on a monochromatic neutron beam line. Preliminary results will be shown. (authors)« less

Retrieval of Total Ozone Amounts from Zenith-Sky Intensities in the Ultraviolet Region

NASA Technical Reports Server (NTRS)

Bojkov, B. R.; Bhartia, P. K.; Hilsenrath, E.; Labow, G. J.

2004-01-01

A new method to determine the total ozone column from zenith-sky intensities in the ultraviolet region has been developed for the Shuttle Solar Backscatter Ultraviolet Spectrometer (SSBUV) operating at the NASA Goddard Space Flight Center. The total ozone column amounts are derived by comparing the ratio of measured intensities from three wavelengths with the equivalent ratios calculated by a radiative transfer model. The differences between the retrieved ozone column amounts and the collocated Brewer double monochromator are within 2% for the measurement period beginning in April 2001. The methodology, as well as the influences of the ozone profiles, aerosols, surface albedo, and the solar zenith angle on the retrieved total ozone amounts will be presented.

Simulation of water-use conservation scenarios for the Mississippi Delta using an existing regional groundwater flow model

USGS Publications Warehouse

Barlow, Jeannie R.B.; Clark, Brian R.

2011-01-01

The Mississippi River alluvial plain in northwestern Mississippi (referred to as the Delta), once a floodplain to the Mississippi River covered with hardwoods and marshland, is now a highly productive agricultural region of large economic importance to Mississippi. Water for irrigation is supplied primarily by the Mississippi River Valley alluvial aquifer, and although the alluvial aquifer has a large reserve, there is evidence that the current rate of water use from the alluvial aquifer is not sustainable. Using an existing regional groundwater flow model, conservation scenarios were developed for the alluvial aquifer underlying the Delta region in northwestern Mississippi to assess where the implementation of water-use conservation efforts would have the greatest effect on future water availability-either uniformly throughout the Delta, or focused on a cone of depression in the alluvial aquifer underlying the central part of the Delta. Five scenarios were simulated with the Mississippi Embayment Regional Aquifer Study groundwater flow model: (1) a base scenario in which water use remained constant at 2007 rates throughout the entire simulation; (2) a 5-percent 'Delta-wide' conservation scenario in which water use across the Delta was decreased by 5 percent; (3) a 5-percent 'cone-equivalent' conservation scenario in which water use within the area of the cone of depression was decreased by 11 percent (a volume equivalent to the 5-percent Delta-wide conservation scenario); (4) a 25-percent Delta-wide conservation scenario in which water use across the Delta was decreased by 25 percent; and (5) a 25-percent cone-equivalent conservation scenario in which water use within the area of the cone of depression was decreased by 55 percent (a volume equivalent to the 25-percent Delta-wide conservation scenario). The Delta-wide scenarios result in greater average water-level improvements (relative to the base scenario) for the entire Delta area than the cone-equivalent scenarios; however, the cone-equivalent scenarios result in greater average water-level improvements within the area of the cone of depression because of focused conservation efforts within that area. Regardless of where conservation is located, the greatest average improvements in water level occur within the area of the cone of depression because of the corresponding large area of unsaturated aquifer material within the area of the cone of depression and the hydraulic gradient, which slopes from the periphery of the Delta towards the area of the cone of depression. Of the four conservation scenarios, the 25-percent cone-equivalent scenario resulted in the greatest increase in storage relative to the base scenario with a 32-percent improvement over the base scenario across the entire Delta and a 60-percent improvement within the area of the cone of depression. Overall, the results indicate that focusing conservation efforts within the area of the cone of depression, rather than distributing conservation efforts uniformly across the Delta, results in greater improvements in the amount of storage within the alluvial aquifer. Additionally, as the total amount of conservation increases (that is, from 5 to 25 percent), the difference in storage improvement between the Delta-wide and cone-equivalent scenarios also increases, resulting in greater gains in storage in the cone-equivalent scenario than in the Delta-wide scenario for the same amount of conservation.

Total reflection infrared spectroscopy of water-ice and frozen aqueous NaCl solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Rachel L.; Searles, Keith; Willard, Jesse A.

2013-12-28

Liquid-like and liquid water at and near the surface of water-ice and frozen aqueous sodium chloride films were observed using attenuated total reflection infrared spectroscopy (ATR-IR). The concentration of NaCl ranged from 0.0001 to 0.01 M and the temperature varied from the melting point of water down to 256 K. The amount of liquid brine at the interface of the frozen films with the germanium ATR crystal increased with salt concentration and temperature. Experimental spectra are compared to reflection spectra calculated for a simplified morphology of a uniform liquid layer between the germanium crystal and the frozen film. This morphologymore » allows for the amount of liquid observed in an experimental spectrum to be converted to the thickness of a homogenous layer with an equivalent amount of liquid. These equivalent thickness ranges from a nanometer for water-ice at 260 K to 170 nm for 0.01 M NaCl close to the melting point. The amounts of brine observed are over an order of magnitude less than the total liquid predicted by equilibrium thermodynamic models, implying that the vast majority of the liquid fraction of frozen solutions may be found in internal inclusions, grain boundaries, and the like. Thus, the amount of liquid and the solutes dissolved in them that are available to react with atmospheric gases on the surfaces of snow and ice are not well described by thermodynamic equilibrium models which assume the liquid phase is located entirely at the surface.« less

Future Change of Snow Water Equivalent over Japan

NASA Astrophysics Data System (ADS)

Hara, M.; Kawase, H.; Kimura, F.; Fujita, M.; Ma, X.

2012-12-01

Western side of Honshu Island and Hokkaido Island in Japan are ones of the heaviest snowfall areas in the world. Although a heavy snowfall often brings disaster, snow is one of the major sources for agriculture, industrial, and house-use in Japan. Even during the winter, the monthly mean of the surface air temperature often exceeds 0 C in large parts of the heavy snow areas along the Sea of Japan. Thus, snow cover may be seriously reduced in these areas as a result of the global warming, which is caused by an increase in greenhouse gases. The change in seasonal march of snow water equivalent, e.g., snowmelt season and amount will strongly influence to social-economic activities. We performed a series of numerical experiments including present and future climate simulations and much-snow and less-snow cases using a regional climate model. Pseudo-Global-Warming (PGW) method (Kimura and Kitoh, 2008) is applied for the future climate simulations. MIROC 3.2 medres 2070s output under IPCC SRES A2 scenario and 1990s output under 20c3m scenario used for PGW method. The precipitation, snow depth, and surface air temperature of the hindcast simulations show good agreement with the AMeDAS station data. In much-snow cases, The decreasing rate of maximum total snow water equivalent over Japan due to climate change was 49%. Main cause of the decrease of the total snow water equivalent is the air temperature rise due to global climate change. The difference in the precipitation amount between the present and the future simulations is small.

Recyclable Thermoresponsive Polymer-Cellulase Bioconjugates for Biomass Depolymerization

PubMed Central

Mackenzie, Katherine J.; Francis, Matthew B.

2013-01-01

Here we report the construction and characterization of a recoverable, thermoresponsive polymer-endoglucanase bioconjugate that matches the activity of unmodified enzymes on insoluble cellulose substrates. Two copolymers exhibiting a thermoresponsive lower critical solution temperature (LCST) were created through the copolymerization of an aminooxy-bearing methacrylamide with N-isopropylacrylamide (NIPAm) or N-isopropylmethacrylamide (NIPMa). The aminooxy group provided a handle through which the LCST was adjusted through small-molecule quenching. This allowed materials with LCSTs ranging from 20.9 °C to 60.5 °C to be readily obtained after polymerization. The thermostable endoglucanase EGPh from the hypothermophilic Pyrococcus horikoshii was transaminated with pyridoxal-5’-phosphate to produce a ketone-bearing protein, which was then site-selectively modified through oxime linkage with benzylalkoxyamine or 5 kDa-poly(ethylene glycol)-alkoxyamine. These modified proteins showed activity comparable to the controls when assayed on an insoluble cellulosic substrate. Two polymer bioconjugates were then constructed using transaminated EGPh and the aminooxy-bearing copolymers. After twelve hours, both bioconjugates produced an equivalent amount of free reducing sugars as the unmodified control using insoluble cellulose as a substrate. The recycling ability of the NIPAm copolymer-EGPh conjugate was determined through three rounds of activity, maintaining over 60% activity after two cycles of reuse and affording significantly more soluble carbohydrates than unmodified enzyme alone. When assayed on acid-pretreated Miscanthus, this bioconjugate increased the amount of reducing sugars by 2.8-fold over three rounds of activity. The synthetic strategy of this bioconjugate allows the LCST of the material to be changed readily from a common stock of copolymer and the method of attachment is applicable to a variety of proteins, enabling the same approach to be amenable to thermophile-derived cellulases or to the separation of multiple species using polymers with different recovery temperatures. PMID:23270527

An investigation into the placement of force delivery systems and the initial forces applied by clinicians during space closure.

PubMed

Nattrass, C; Ireland, A J; Sherriff, M

1997-05-01

This in vitro investigation was designed to establish not only how clinicians apply forces for space closure when using the straight wire appliance and sliding mechanics, but also to quantify the initial force levels produced. A single typodont, with residual extraction space in each quadrant, was set up to simulate space closure using sliding mechanics. On two occasions, at least 2 months apart, 18 clinicians were asked to apply three force delivery systems to the typodont, in the manner in which they would apply it in a clinical situation. The three types of force delivery system investigated were elastomeric chain, an elastomeric module on a steel ligature, and a nickel-titanium closed coil spring. A choice of spaced or unspaced elastomeric chain produced by a single manufacturer was provided. The amount of stretch which was placed on each type of system was measured and, using an Instron Universal Testing Machine, the initial force which would be generated by each force delivery system was established. Clinicians were assessed to examine their consistency in the amount of stretch which each placed on the force delivery systems, their initial force application and their ability to apply equivalent forces with the different types of force delivery system. The clinicians were found to be consistent in their method of application of the force delivery systems and, therefore, their force application, as individuals, but there was a wide range of forces applied as a group. However, most clinicians applied very different forces when using different force delivery systems. When using the module on a ligature the greatest force was applied, whilst the nickel titanium coil springs provided the least force.

47 CFR 54.403 - Lifeline support amount.

Code of Federal Regulations, 2013 CFR

2013-10-01

... qualifying low-income consumer and that it has received any non-federal regulatory approvals necessary to... any non-federal regulatory approvals necessary to implement the required rate reduction. (b... Common Line charges or equivalent federal charges must apply federal Lifeline support to waive the...

47 CFR 54.403 - Lifeline support amount.

Code of Federal Regulations, 2012 CFR

2012-10-01

... qualifying low-income consumer and that it has received any non-federal regulatory approvals necessary to... any non-federal regulatory approvals necessary to implement the required rate reduction. (b... Common Line charges or equivalent federal charges must apply federal Lifeline support to waive the...

Digestate as nutrient source for biomass production of sida, lucerne and maize

NASA Astrophysics Data System (ADS)

Bueno Piaz Barbosa, Daniela; Nabel, Moritz; Horsch, David; Tsay, Gabriela; Jablonowski, Nicolai

2014-05-01

Biogas as a renewable energy source is supported in many countries driven by climate and energy policies. Nowadays, Germany is the largest biogas producer in the European Union. A sustainable resource management has to be considered within this growing scenario of biogas production systems and its environmental impacts. In this respect, studies aiming to enhance the management of biogas residues, which represents a valuable source of nutrients and organic fertilization, are needed. Our objective was to evaluate the digestate (biogas residue after fermentation process) application as nutrient source for biomass production of three different plants: sida (Sida hermaphrodita - Malvaceae), lucerne (Medicago sativa - Fabaceae) and maize (Zea mays - Poaceae). The digestate was collected from an operating biogas facility (fermenter volume 2500m³, ADRW Natur Power GmbH & Co.KG Titz/Ameln, Germany) composed of maize silage as the major feedstock, and minor amounts of chicken manure, with a composition of 3,29% N; 1,07% P; 3,42% K; and 41,2% C. An arable field soil (Endogleyic Stagnosol) was collected from 0-30 cm depth and 5 mm sieved. The fertilizer treatments of the plants were established in five replicates including digestate (application amount equivalent to 40 t ha-1) and NPK fertilizer (application amount equivalent to 200:100:300 kg ha-1) applications, according to the recommended agricultural doses, and a control (no fertilizer application). The digestate and the NPK fertilizer were thoroughly mixed with the soil in a rotatory shaker for 30 min. The 1L pots were filled with the fertilized soil and the seedlings were transplanted and grown for 30 days under greenhouse conditions (16 h day/8 h night: 24ºC/18ºC; 60% air humidity). After harvesting, the leaf area was immediately measured, and the roots were washed to allow above and below-ground biomass determination. Subsequently, shoots and roots were dried at 60ºC for 48 hours. The biomass and leaf area of sida, lucerne and maize presented similar performance for both digestate and the NPK fertilizer applications, which were greater than the control, showing a positive fertilizing effect of the digestate for plant biomass production. Considering the biomass production obtained with the digestate application for sida, lucerne and maize, the results give support for further field experiments which aim to evaluate the fertilizing and conditioning effect of digestates.

Hydroxy acetone and lactic acid synthesis from aqueous propylene glycol/hydrogen peroxide catalysis on Pd-black

DOE Office of Scientific and Technical Information (OSTI.GOV)

Disselkamp, Robert S.; Harris, Benjamin D.; Hart, Todd R.

2008-07-20

The production of polyol chemicals is of increasing interest as they are obtained from the catalytic processing of biological feedstock materials, which also is becoming more prevalent. A case in point is glycerol production, formed as a byproduct in biodiesel catalytic processing. Here we report the reaction of a simple 1,2-diol, propylene glycol, with hydrogen peroxide and a Pd-black catalyst under reflux conditions at 368 K. The experiments were performed by either co-addition of hydrogen peroxide with air sparging, or addition of hydrogen peroxide alone, each yielding hydroxy acetone (HA) and acetic acid (AA) products, with a lesser amount ofmore » lactic acid (LA) formed. Product conversion data at near neutral pH versus hydrogen peroxide equivalents added relative to substrate is presented. Hydrogen peroxide addition without air sparging at 5 equivalents resulted in 65% conversion with an HA:AA molar ratio of 2:1. Conversely, hydrogen peroxide addition with air sparging at only 0.75 equivalents resulted in 40% conversion with an HA:AA ratio of 3:1. From this it is concluded that although the product distribution in these chemistries is somewhat unchanged by air sparging, it is surprising that the amount of reactive oxygen is greatly enhanced with co-addition of O2/H2O2. Additional studies have revealed the amount of LA formed can be enhanced under acidic conditions (pH=1.5 compared to pH=8.5), such that 26% of total product formation is LA. Since hydrogen peroxide is an environmentally clean reagent and becoming more cost effective to use, this work may guide future applied investigations into polyol chemical syntheses.« less

Presence of organophosphorus pesticide oxygen analogs in air samples

NASA Astrophysics Data System (ADS)

Armstrong, Jenna L.; Fenske, Richard A.; Yost, Michael G.; Galvin, Kit; Tchong-French, Maria; Yu, Jianbo

2013-02-01

A number of recent toxicity studies have highlighted the increased potency of oxygen analogs (oxons) of several organophosphorus (OP) pesticides. These findings were a major concern after environmental oxons were identified in environmental samples from air and surfaces following agricultural spray applications in California and Washington State. This paper reports on the validity of oxygen analog measurements in air samples for the OP pesticide, chlorpyrifos. Controlled environmental and laboratory experiments were used to examine artificial formation of chlorpyrifos-oxon using OSHA Versatile Sampling (OVS) tubes as recommended by NIOSH method 5600. Additionally, we compared expected chlorpyrifos-oxon attributable to artificial transformation to observed chlorpyrifos-oxon in field samples from a 2008 Washington State Department of Health air monitoring study using non-parametric statistical methods. The amount of artificially transformed oxon was then modeled to determine the amount of oxon present in the environment. Toxicity equivalency factors (TEFs) for chlorpyrifos-oxon were used to calculate chlorpyrifos-equivalent air concentrations. The results demonstrate that the NIOSH-recommended sampling matrix (OVS tubes with XAD-2 resin) was found to artificially transform up to 30% of chlorpyrifos to chlorpyrifos-oxon, with higher percentages at lower concentrations (<30 ng m-3) typical of ambient or residential levels. Overall, the 2008 study data had significantly greater oxon than expected by artificial transformation, but the exact amount of environmental oxon in air remains difficult to quantify with the current sampling method. Failure to conduct laboratory analysis for chlorpyrifos-oxon may result in underestimation of total pesticide concentration when using XAD-2 resin matrices for occupational or residential sampling. Alternative methods that can accurately measure both OP pesticides and their oxygen analogs should be used for air sampling, and a toxicity equivalent factor approach should be used to determine potential health risks from exposures.

EFFECTS OF GAMMA IRRADIATION ON EPDM ELASTOMERS (REVISION 1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, E.

Two formulations of EPDM elastomer, one substituting a UV stabilizer for the normal antioxidant in this polymer, and the other the normal formulation, were synthesized and samples of each were exposed to gamma irradiation in initially pure deuterium gas to compare their radiation stability. Stainless steel containers having rupture disks were designed for this task. After 130 MRad dose of cobalt-60 radiation in the SRNL Gamma Irradiation Facility, a significant amount of gas was created by radiolysis; however the composition indicated by mass spectroscopy indicated an unexpected increase in the total amount deuterium in both formulations. The irradiated samples retainedmore » their ductility in a bend test. No change of sample weight, dimensions, or density was observed. No change of the glass transition temperature as measured by dynamic mechanical analysis was observed, and most of the other dynamic mechanical properties remained unchanged. There appeared to be an increase in the storage modulus of the irradiated samples containing the UV stabilizer above the glass transition, which may indicate hardening of the material by radiation damage. Revision 1 adds a comparison with results of a study of tritium exposed EPDM. The amount of gas produced by the gamma irradiation was found to be equivalent to about 280 days exposure to initially pure tritium gas at one atmosphere. The glass transition temperature of the tritium exposed EPDM rose about 10°C. over 280 days, while no glass transition temperature change was observed for gamma irradiated EPDM. This means that gamma irradiation in deuterium cannot be used as a surrogate for tritium exposure.« less

Sources, fates, toxicity, and risks of trifluoroacetic acid and its salts: Relevance to substances regulated under the Montreal and Kyoto Protocols.

PubMed

Solomon, Keith R; Velders, Guus J M; Wilson, Stephen R; Madronich, Sasha; Longstreth, Janice; Aucamp, Pieter J; Bornman, Janet F

2016-01-01

Trifluoroacetic acid (TFA) is a breakdown product of several hydrochlorofluorocarbons (HCFC), regulated under the Montreal Protocol (MP), and hydrofluorocarbons (HFC) used mainly as refrigerants. Trifluoroacetic acid is (1) produced naturally and synthetically, (2) used in the chemical industry, and (3) a potential environmental breakdown product of a large number (>1 million) chemicals, including pharmaceuticals, pesticides, and polymers. The contribution of these chemicals to global amounts of TFA is uncertain, in contrast to that from HCFC and HFC regulated under the MP. TFA salts are stable in the environment and accumulate in terminal sinks such as playas, salt lakes, and oceans, where the only process for loss of water is evaporation. Total contribution to existing amounts of TFA in the oceans as a result of the continued use of HCFCs, HFCs, and hydrofluoroolefines (HFOs) up to 2050 is estimated to be a small fraction (<7.5%) of the approximately 0.2 μg acid equivalents/L estimated to be present at the start of the millennium. As an acid or as a salt TFA is low to moderately toxic to a range of organisms. Based on current projections of future use of HCFCs and HFCs, the amount of TFA formed in the troposphere from substances regulated under the MP is too small to be a risk to the health of humans and environment. However, the formation of TFA derived from degradation of HCFC and HFC warrants continued attention, in part because of a long environmental lifetime and due many other potential but highly uncertain sources.

Comparing fire spread algorithms using equivalence testing and neutral landscape models

Treesearch

Brian R. Miranda; Brian R. Sturtevant; Jian Yang; Eric J. Gustafson

2009-01-01

We demonstrate a method to evaluate the degree to which a meta-model approximates spatial disturbance processes represented by a more detailed model across a range of landscape conditions, using neutral landscapes and equivalence testing. We illustrate this approach by comparing burn patterns produced by a relatively simple fire spread algorithm with those generated by...

Preliminary Findings on the Effects of Self-Referring and Evaluative Stimuli on Stimulus Equivalence Class Formation

ERIC Educational Resources Information Center

Merwin, Rhonda M.; Wilson, Kelly G.

2005-01-01

Thirty-two subjects completed 2 stimulus equivalence tasks using a matching-to-sample paradigm. One task involved direct reinforcement of conditional discriminations designed to produce derived relations between self-referring stimuli (e.g., me, myself, I) and positive evaluation words (e.g., whole, desirable, perfect). The other task was designed…

76 FR 76698 - Dominion Cove Point LNG, LP; Application To Export Domestic Liquefied Natural Gas to Non-Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... Domestic Liquefied Natural Gas to Non-Free Trade Agreement Nations AGENCY: Office of Fossil Energy, DOE... metric tons per year of domestically produced liquefied natural gas (LNG) (equivalent to approximately... equivalent to approximately 1 Bcf per day of natural gas. DATES: Protests, motions to intervene or notices of...

Equivalent Air Spring Suspension Model for Quarter-Passive Model of Passenger Vehicles.

PubMed

Abid, Haider J; Chen, Jie; Nassar, Ameen A

2015-01-01

This paper investigates the GENSIS air spring suspension system equivalence to a passive suspension system. The SIMULINK simulation together with the OptiY optimization is used to obtain the air spring suspension model equivalent to passive suspension system, where the car body response difference from both systems with the same road profile inputs is used as the objective function for optimization (OptiY program). The parameters of air spring system such as initial pressure, volume of bag, length of surge pipe, diameter of surge pipe, and volume of reservoir are obtained from optimization. The simulation results show that the air spring suspension equivalent system can produce responses very close to the passive suspension system.

47 CFR 80.217 - Suppression of interference aboard ships.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to any receiver required by statute or treaty. (b) The electromagnetic field from receivers required... mile from the receiver: Frequency of interfering emissions Field intensity in microvolts per meter... following amounts of power, to an artificial antenna having electrical characteristics equivalent to those...

31 CFR 500.556 - Joint bank accounts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FOREIGN ASSETS CONTROL REGULATIONS Licenses... unblocking a portion of or all of a blocked joint bank account where a non-blocked applicant claims... survivorship provision. Specific licenses are issued unblocking an amount equivalent to that portion of the...

Economic costs of endemic non-filarial elephantiasis in Wolaita Zone, Ethiopia.

PubMed

Tekola, Fasil; Mariam, Damen H; Davey, Gail

2006-07-01

Endemic non-filarial elephantiasis or podoconiosis is a chronic and debilitating geochemical disease occurring in individuals exposed to red clay soil derived from alkalic volcanic rock. It is a major public health problem in countries in tropical Africa, Central America and North India. To estimate the direct and the average productivity cost attributable to podoconiosis, and to compare the average productivity time of podoconiosis patients with non-patients. Matched comparative cross sectional survey involving 702 study subjects (patients and non-patients) supplemented by interviews with key informants in Wolaita Zone, southern Ethiopia. Total direct costs of podoconiosis amounted to the equivalent of US$ 143 per patient per year. The total productivity loss for a patient amounted to 45% of the total working days per year, causing a monetary loss equivalent to US$ 63. In Wolaita zone, the overall cost of podoconiosis exceeds US$ 16 million per year. Podoconiosis has enormous economic impact in affected areas. Simple preventive measures (such as use of robust footwear) must be promoted by health policy makers.

Neutral Lipid Biosynthesis in Engineered Escherichia coli: Jojoba Oil-Like Wax Esters and Fatty Acid Butyl Esters

PubMed Central

Kalscheuer, Rainer; Stöveken, Tim; Luftmann, Heinrich; Malkus, Ursula; Reichelt, Rudolf; Steinbüchel, Alexander

2006-01-01

Wax esters are esters of long-chain fatty acids and long-chain fatty alcohols which are of considerable commercial importance and are produced on a scale of 3 million tons per year. The oil from the jojoba plant (Simmondsia chinensis) is the main biological source of wax esters. Although it has a multitude of potential applications, the use of jojoba oil is restricted, due to its high price. In this study, we describe the establishment of heterologous wax ester biosynthesis in a recombinant Escherichia coli strain by coexpression of a fatty alcohol-producing bifunctional acyl-coenzyme A reductase from the jojoba plant and a bacterial wax ester synthase from Acinetobacter baylyi strain ADP1, catalyzing the esterification of fatty alcohols and coenzyme A thioesters of fatty acids. In the presence of oleate, jojoba oil-like wax esters such as palmityl oleate, palmityl palmitoleate, and oleyl oleate were produced, amounting to up to ca. 1% of the cellular dry weight. In addition to wax esters, fatty acid butyl esters were unexpectedly observed in the presence of oleate. The latter could be attributed to solvent residues of 1-butanol present in the medium component, Bacto tryptone. Neutral lipids produced in recombinant E. coli were accumulated as intracytoplasmic inclusions, demonstrating that the formation and structural integrity of bacterial lipid bodies do not require specific structural proteins. This is the first report on substantial biosynthesis and accumulation of neutral lipids in E. coli, which might open new perspectives for the biotechnological production of cheap jojoba oil equivalents from inexpensive resources employing recombinant microorganisms. PMID:16461689

Neutral lipid biosynthesis in engineered Escherichia coli: jojoba oil-like wax esters and fatty acid butyl esters.

PubMed

Kalscheuer, Rainer; Stöveken, Tim; Luftmann, Heinrich; Malkus, Ursula; Reichelt, Rudolf; Steinbüchel, Alexander

2006-02-01

Wax esters are esters of long-chain fatty acids and long-chain fatty alcohols which are of considerable commercial importance and are produced on a scale of 3 million tons per year. The oil from the jojoba plant (Simmondsia chinensis) is the main biological source of wax esters. Although it has a multitude of potential applications, the use of jojoba oil is restricted, due to its high price. In this study, we describe the establishment of heterologous wax ester biosynthesis in a recombinant Escherichia coli strain by coexpression of a fatty alcohol-producing bifunctional acyl-coenzyme A reductase from the jojoba plant and a bacterial wax ester synthase from Acinetobacter baylyi strain ADP1, catalyzing the esterification of fatty alcohols and coenzyme A thioesters of fatty acids. In the presence of oleate, jojoba oil-like wax esters such as palmityl oleate, palmityl palmitoleate, and oleyl oleate were produced, amounting to up to ca. 1% of the cellular dry weight. In addition to wax esters, fatty acid butyl esters were unexpectedly observed in the presence of oleate. The latter could be attributed to solvent residues of 1-butanol present in the medium component, Bacto tryptone. Neutral lipids produced in recombinant E. coli were accumulated as intracytoplasmic inclusions, demonstrating that the formation and structural integrity of bacterial lipid bodies do not require specific structural proteins. This is the first report on substantial biosynthesis and accumulation of neutral lipids in E. coli, which might open new perspectives for the biotechnological production of cheap jojoba oil equivalents from inexpensive resources employing recombinant microorganisms.

What do we know about the effects of exposure to 'Low alcohol' and equivalent product labelling on the amounts of alcohol, food and tobacco people select and consume? A systematic review.

PubMed

Shemilt, Ian; Hendry, Vivien; Marteau, Theresa M

2017-01-12

Explicit labelling of lower strength alcohol products could reduce alcohol consumption by attracting more people to buy and drink such products instead of higher strength ones. Alternatively, it may lead to more consumption due to a 'self-licensing' mechanism. Equivalent labelling of food or tobacco (for example "Low fat" or "Low tar") could influence consumption of those products by similar mechanisms. This systematic review examined the effects of 'Low alcohol' and equivalent labelling of alcohol, food and tobacco products on selection, consumption, and perceptions of products among adults. A systematic review was conducted based on Cochrane methods. Electronic and snowball searches identified 26 eligible studies. Evidence from 12 randomised controlled trials (all on food) was assessed for risk of bias, synthesised using random effects meta-analysis, and interpreted in conjunction with evidence from 14 non-randomised studies (one on alcohol, seven on food and six on tobacco). Outcomes assessed were: quantities of the product (i) selected or (ii) consumed (primary outcomes - behaviours), (iii) intentions to select or consume the product, (iv) beliefs associated with it consumption, (v) product appeal, and (vi) understanding of the label (secondary outcomes - cognitions). Evidence for impacts on the primary outcomes (i.e. amounts selected or consumed) was overall of very low quality, showing mixed effects, likely to vary by specific label descriptors, products and population characteristics. Overall very low quality evidence suggested that exposure to 'Low alcohol' and equivalent labelling on alcohol, food and tobacco products can shift consumer perceptions of products, with the potential to 'self-licence' excess consumption. Considerable uncertainty remains about the effects of labels denoting low alcohol, and equivalent labels, on alcohol, food and tobacco selection and consumption. Independent, high-quality studies are urgently needed to inform policies on labelling regulations.

CSAM: Compressed SAM format.

PubMed

Cánovas, Rodrigo; Moffat, Alistair; Turpin, Andrew

2016-12-15

Next generation sequencing machines produce vast amounts of genomic data. For the data to be useful, it is essential that it can be stored and manipulated efficiently. This work responds to the combined challenge of compressing genomic data, while providing fast access to regions of interest, without necessitating decompression of whole files. We describe CSAM (Compressed SAM format), a compression approach offering lossless and lossy compression for SAM files. The structures and techniques proposed are suitable for representing SAM files, as well as supporting fast access to the compressed information. They generate more compact lossless representations than BAM, which is currently the preferred lossless compressed SAM-equivalent format; and are self-contained, that is, they do not depend on any external resources to compress or decompress SAM files. An implementation is available at https://github.com/rcanovas/libCSAM CONTACT: canovas-ba@lirmm.frSupplementary Information: Supplementary data is available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

The unconventional antimicrobial peptides of the classical propionibacteria.

PubMed

Faye, Therese; Holo, Helge; Langsrud, Thor; Nes, Ingolf F; Brede, Dag A

2011-02-01

The classical propionibacteria produce genetically unique antimicrobial peptides, whose biological activities are without equivalents, and to which there are no homologous sequences in public databases. In this review, we summarize the genetics, biochemistry, biosynthesis, and biological activities of three extensively studied antimicrobial peptides from propionibacteria. The propionicin T1 peptide constitutes a bona fide example of an unmodified general secretory pathway (sec)-dependent bacteriocin, which is bactericidal towards all tested species of propionibacteria except Propionibacterium freudenreichii. The PAMP antimicrobial peptide represents a novel concept within bacterial antagonism, where an inactive precursor protein is secreted in large amounts, and which activation appears to rely on subsequent processing by proteases in its resident milieu. Propionicin F is a negatively charged bacteriocin that displays an intraspecies bactericidal inhibition spectrum. The biosynthesis of propionicin F appears to proceed through a series of unusual events requiring both N- and C-terminal processing of a precursor protein, which probably requires the radical SAM superfamily enzyme PcfB.

MetaPathways v2.5: quantitative functional, taxonomic and usability improvements.

PubMed

Konwar, Kishori M; Hanson, Niels W; Bhatia, Maya P; Kim, Dongjae; Wu, Shang-Ju; Hahn, Aria S; Morgan-Lang, Connor; Cheung, Hiu Kan; Hallam, Steven J

2015-10-15

Next-generation sequencing is producing vast amounts of sequence information from natural and engineered ecosystems. Although this data deluge has an enormous potential to transform our lives, knowledge creation and translation need software applications that scale with increasing data processing and analysis requirements. Here, we present improvements to MetaPathways, an annotation and analysis pipeline for environmental sequence information that expedites this transformation. We specifically address pathway prediction hazards through integration of a weighted taxonomic distance and enable quantitative comparison of assembled annotations through a normalized read-mapping measure. Additionally, we improve LAST homology searches through BLAST-equivalent E-values and output formats that are natively compatible with prevailing software applications. Finally, an updated graphical user interface allows for keyword annotation query and projection onto user-defined functional gene hierarchies, including the Carbohydrate-Active Enzyme database. MetaPathways v2.5 is available on GitHub: http://github.com/hallamlab/metapathways2. shallam@mail.ubc.ca Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

Relating results from earthworm toxicity tests to agricultural soil

USGS Publications Warehouse

Beyer, W.N.; Greig-Smith, P.W.

1992-01-01

The artificial soil tests of the European Economic Community and of the Organization for Economic Cooperation produce data relating earthworm mortality to pesticide concentrations in soil under laboratory conditions. To apply these results to agricultural soils it is necessary to relate these concentrations to amounts of pesticide applied per area. This paper reviews the relevant published literature and suggests a simple relation for regulatory use. Hazards to earthworms from pesticides are suggested to be greatest soon after application, when the pesticides may be concentrated in a soil layer a few millimeters thick. For estimating exposure of earthworms, however, a thicker soil layer should be considered, to account for their movement through soil. During favorable weather conditions, earthworms belonging to species appropriate to the artificial soil test have been reported to confine their activity to a layer about 5 cm. If a 5-cm layer is accepted as relevant for regulatory purposes, then an application of 1 kg/ha would be equivalent to 1-67 ppm (dry) in the artificial soil test.

Effects of streamwise vortex breakdown on supersonic combustion.

PubMed

Hiejima, Toshihiko

2016-04-01

This paper presents a numerical simulation study of the combustion structure of streamwise vortex breakdown at Mach number 2.48. Hydrogen fuel is injected into a combustor at sonic speed from the rear of a hypermixer strut that can generate streamwise vortices. The results show that the burning behavior is enhanced at the points of the shock waves that are incident on the vortex and therefore the vortex breakdown in the subsonic region occurs due to combustion. The breakdown domain in the mainstream is found to form a flame-holding region suited to combustion and to lead to a stable combustion field with detached flames. In this way, streamwise vortex breakdown has an essential role in combustion enhancement and the formation of flames that hold under supersonic inflow conditions. Finally, the combustion property defined here is shown to coincide with the produced-water mass flow. This property shows that the amount of combustion is saturated at equivalence ratios over 0.4, although there is a slight increase beyond 1.

The Supply of Prescription Opioids: Contributions of Episodic-Care Prescribers and High-Quantity Prescribers.

PubMed

Schneberk, Todd; Raffetto, Brian; Kim, David; Schriger, David L

2018-06-01

We determine episodic and high-quantity prescribers' contribution to opioid prescriptions and total morphine milligram equivalents in California, especially among individuals prescribed large amounts of opioids. This was a cross-sectional descriptive analysis of opioid prescribing patterns during an 8-year period using the de-identified Controlled Substance Utilization Review and Evaluation System (CURES) database, the California subsection of the prescription drug monitoring program. We took a 10% random sample of all patients and stratified them by the amount of prescription opioids obtained during their maximal 90-day period. We identified "episodic prescribers" as those whose prescribing pattern included short-acting opioids on greater than 95% of all prescriptions, fewer than or equal to 31 pills on 95% of all prescriptions, only 1 prescription in the database for greater than 90% of all patients to whom they gave opioids, fewer than 6 prescriptions in the database to greater than 99% of patients given opioids, and fewer than 540 prescriptions per year. We identified top 5% prescribers by their morphine milligram equivalents per day in the database. We examined the relationship between patient opioid prescriptions and provider type, with the primary analysis performed on the patient cohort who received only short-acting opioids in an attempt to avoid guideline-concordant palliative, oncologic, and addiction care, and a secondary analysis performed on all patients. Among patients with short-acting opioid only, episodic prescribers (14.6% of 173,000 prescribers) wrote at least one prescription to 25% of 2.7 million individuals but were responsible for less than 9% of the 10.5 million opioid prescriptions and less than 3% of the 3.9 billion morphine milligram equivalents in our sample. Among individuals with high morphine milligram equivalents use, episodic prescribers were responsible for 2.8% of prescriptions and 0.6% of total morphine milligram equivalents. Conversely, the top 5% of prescribers prescribed at least 29.8% of prescriptions and 48.8% of total morphine milligram equivalents, with a greater contribution in patients with high morphine milligram equivalents. Episodic prescribers contribute minimally to total opioid prescriptions, especially among individuals categorized as using high morphine milligram equivalents. Interventions focused on reducing opioid prescriptions in the episodic care setting are unlikely to yield important reductions in the prescription opioid supply; conversely, targeting high-quantity prescribers has the potential to create substantial reductions. Copyright © 2017 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

Recommendations on evidence needed to support measurement equivalence between electronic and paper-based patient-reported outcome (PRO) measures: ISPOR ePRO Good Research Practices Task Force report.

PubMed

Coons, Stephen Joel; Gwaltney, Chad J; Hays, Ron D; Lundy, J Jason; Sloan, Jeff A; Revicki, Dennis A; Lenderking, William R; Cella, David; Basch, Ethan

2009-06-01

Patient-reported outcomes (PROs) are the consequences of disease and/or its treatment as reported by the patient. The importance of PRO measures in clinical trials for new drugs, biological agents, and devices was underscored by the release of the US Food and Drug Administration's draft guidance for industry titled "Patient-Reported Outcome Measures: Use in Medical Product Development to Support Labeling Claims." The intent of the guidance was to describe how the FDA will evaluate the appropriateness and adequacy of PRO measures used as effectiveness end points in clinical trials. In response to the expressed need of ISPOR members for further clarification of several aspects of the draft guidance, ISPOR's Health Science Policy Council created three task forces, one of which was charged with addressing the implications of the draft guidance for the collection of PRO data using electronic data capture modes of administration (ePRO). The objective of this report is to present recommendations from ISPOR's ePRO Good Research Practices Task Force regarding the evidence necessary to support the comparability, or measurement equivalence, of ePROs to the paper-based PRO measures from which they were adapted. The task force was composed of the leadership team of ISPOR's ePRO Working Group and members of another group (i.e., ePRO Consensus Development Working Group) that had already begun to develop recommendations regarding ePRO good research practices. The resulting task force membership reflected a broad array of backgrounds, perspectives, and expertise that enriched the development of this report. The prior work became the starting point for the Task Force report. A subset of the task force members became the writing team that prepared subsequent iterations of the report that were distributed to the full task force for review and feedback. In addition, review beyond the task force was sought and obtained. Along with a presentation and discussion period at an ISPOR meeting, a draft version of the full report was distributed to roughly 220 members of a reviewer group. The reviewer group comprised individuals who had responded to an emailed invitation to the full membership of ISPOR. This Task Force report reflects the extensive internal and external input received during the 16-month good research practices development process. RESULTS/RECOMMENDATIONS: An ePRO questionnaire that has been adapted from a paper-based questionnaire ought to produce data that are equivalent or superior (e.g., higher reliability) to the data produced from the original paper version. Measurement equivalence is a function of the comparability of the psychometric properties of the data obtained via the original and adapted administration mode. This comparability is driven by the amount of modification to the content and format of the original paper PRO questionnaire required during the migration process. The magnitude of a particular modification is defined with reference to its potential effect on the content, meaning, or interpretation of the measure's items and/or scales. Based on the magnitude of the modification, evidence for measurement equivalence can be generated through combinations of the following: cognitive debriefing/testing, usability testing, equivalence testing, or, if substantial modifications have been made, full psychometric testing. As long as only minor modifications were made to the measure during the migration process, a substantial body of existing evidence suggests that the psychometric properties of the original measure will still hold for the ePRO version. Hence, an evaluation limited to cognitive debriefing and usability testing only may be sufficient. However, where more substantive changes in the migration process has occurred, confirming that the adaptation to the ePRO format did not introduce significant response bias and that the two modes of administration produce essentially equivalent results is necessary. Recommendations regarding the study designs and statistical approaches for assessing measurement equivalence are provided. The electronic administration of PRO measures offers many advantages over paper administration. We provide a general framework for decisions regarding the level of evidence needed to support modifications that are made to PRO measures when they are migrated from paper to ePRO devices. The key issues include: 1) the determination of the extent of modification required to administer the PRO on the ePRO device and 2) the selection and implementation of an effective strategy for testing the measurement equivalence of the two modes of administration. We hope that these good research practice recommendations provide a path forward for researchers interested in migrating PRO measures to electronic data collection platforms.

Quantification of Trichothecene-Producing Fusarium Species in Harvested Grain by Competitive PCR To Determine Efficacies of Fungicides against Fusarium Head Blight of Winter Wheat

PubMed Central

Edwards, S. G.; Pirgozliev, S. R.; Hare, M. C.; Jenkinson, P.

2001-01-01

We developed a PCR-based assay to quantify trichothecene-producing Fusarium based on primers derived from the trichodiene synthase gene (Tri5). The primers were tested against a range of fusarium head blight (FHB) (also known as scab) pathogens and found to amplify specifically a 260-bp product from 25 isolates belonging to six trichothecene-producing Fusarium species. Amounts of the trichothecene-producing Fusarium and the trichothecene mycotoxin deoxynivalenol (DON) in harvested grain from a field trial designed to test the efficacies of the fungicides metconazole, azoxystrobin, and tebuconazole to control FHB were quantified. No correlation was found between FHB severity and DON in harvested grain, but a good correlation existed between the amount of trichothecene-producing Fusarium and DON present within grain. Azoxystrobin did not affect levels of trichothecene-producing Fusarium compared with those of untreated controls. Metconazole and tebuconazole significantly reduced the amount of trichothecene-producing Fusarium in harvested grain. We hypothesize that the fungicides affected the relationship between FHB severity and the amount of DON in harvested grain by altering the proportion of trichothecene-producing Fusarium within the FHB disease complex and not by altering the rate of DON production. The Tri5 quantitative PCR assay will aid research directed towards reducing amounts of trichothecene mycotoxins in food and animal feed. PMID:11282607

Development of ultrafine-grained microstructure in Al-Cu-Mg alloy through equal-channel angular pressing

NASA Astrophysics Data System (ADS)

Sai Anuhya, Danam; Gupta, Ashutosh; Nayan, Niraj; Narayana Murty, S. V. S.; Manna, R.; Sastry, G. V. S.

2014-08-01

Al-Cu-Mg alloys are extensively used for riveting applications in aerospace industries due to their relatively high shear strength coupled with high plasticity. The significant advantage of using V65 aluminum alloy ((Al-4Cu-0.2Mg) for rivet application also stems from its significantly slower natural aging kinetics, which gives operational flexibility to carryout riveting operation even after 4 days of solution heat treatment, in contrast to its equivalent alloy AA2024.Rivets are usually made by cold heading of wire rods. In order to form a defect free rivet head, grain size control in wire rods is essential at each and every stage of processing right from casting onwards upto the final wire drawing stage. Wire drawing is carried out at room temperature to reduce diameter as well as impart good surface finish. In the present study, different microstructures in V65 alloy bars were produced by rolling at different temperatures (room temperature to 523K) and subsequently deformed by equal channel angular pressing (ECAP) at 423K upto an equivalent strain of 7. ECAP was carried out to study the effect of initial microstructure on grain refinement and degree of deformation on the evolution of ultrafine grain structure. The refinement of V65 alloy by ECAP is significantly influenced by Initial microstructure but amount of deformation strongly affects the evolution processes as revealed by optical microscopy and transmission electron microscopy.

Effect of sulfate on anaerobic reduction of nitrobenzene with acetate or propionate as an electron donor.

PubMed

Huang, Jingang; Wen, Yue; Ding, Ning; Xu, Yue; Zhou, Qi

2012-09-15

Sulfate is frequently found in wastewaters that contain nitrobenzene. To reveal the effect of sulfate on the reductive transformation of nitrobenzene to aniline--with acetate or propionate as potential electron donors in anaerobic systems--an acetate series (R1-R5) and a propionate series (R6-R10) were set up. Each of these was comprised of five laboratory-scale sequence batch reactors. The two series were amended with the same amount of nitrobenzene and electron donor electron equivalents, whereas with increasing sulfate concentrations. Results indicated that the presence of sulfate could depress nitrobenzene reduction. Such depression is linked to the inhibition of nitroreductase activity and/or the shift of electron flow. In the acetate series, although sulfate did not strongly compete with nitrobenzene for electron donors, noncompetitive inhibition of specific nitrobenzene reduction rates by sulfate was observed, with an inhibition constant of 0.40 mM. Propionate, which can produce intermediate H₂ as preferred reducing equivalent, is a more effective primary electron donor for nitrobenzene reduction as compared to acetate. In the propionate series, sulfate was found to be a preferential electron acceptor as compared to nitrobenzene, resulting in a quick depletion of propionate and then a likely termination of H₂-releasing under higher sulfate concentrations (R9 and R10). In such a situation, nitrobenzene reduction slowed down, occurring two-stage zero-order kinetics. Copyright © 2012 Elsevier Ltd. All rights reserved.

The geochemical evolution of aqueous sodium in the Black Creek Aquifer, Horry and Georgetown counties, South Carolina

USGS Publications Warehouse

Zack, Allen L.; Roberts, Ivan

1988-01-01

The Black Creek aquifer contains dilute seawater near the North Carolina State line, probably the result of incomplete flushing of ancient seawater. Data do not indicate that the dilute seawater has migrated toward areas of fresh ground-water withdrawals. The concentration of chloride in ground-water samples ranges from 5 to 720 milligrams per liter and that of sodium from 160 to 690 milligrams per liter. Ion-exchange reactions (sodium for calcium and fluoride for hydroxyl) occur with the calcium carbonate dissolution reaction which produces calcium, bicarbonate, and hydroxyl ions. The reaction sequence and stoichiometry result in an aqueous solution in which the sum of bicarbonate and chloride equivalents per liter is equal to the equivalents per liter of sodium. Calcium ions are exchanged for sodium ions derived from sodium-rich clays upgradient of the dilute seawater. The cation-exchange reaction equilibrates at a sodium concentration of 280 milligrams per liter. Amounts of sodium greater than 280 milligrams per liter are contributed from dilute seawater. The cation-exchange reaction approaches an equilibrium which represents a mass-action limit in terms of the ratio of sodium to calcium in solution versus the ratio of exchangeable sodium to calcium on clay surfaces. Where the limit of calcium carbonate solubility is approached and dissolution ceases, some precipitation of calcite probably takes place. The dissolution of calcite exposes fossil shark teeth which release fluoride ions to the ground water through anion exchange with aqueous hydroxyl ions.

An experimental investigation of two large annular diffusers with swirling and distorted inflow

NASA Technical Reports Server (NTRS)

Eckert, W. T.; Johnston, J. P.; Simons, T. D.; Mort, K. W.; Page, V. R.

1980-01-01

Two annular diffusers downstream of a nacelle-mounted fan were tested for aerodynamic performance, measured in terms of two static pressure recovery parameters (one near the diffuser exit plane and one about three diameters downstream in the settling duct) in the presence of several inflow conditions. The two diffusers each had an inlet diameter of 1.84 m, an area ratio of 2.3, and an equivalent cone angle of 11.5, but were distinguished by centerbodies of different lengths. The dependence of diffuser performance on various combinations of swirling, radially distorted, and/or azimuthally distorted inflow was examined. Swirling flow and distortions in the axial velocity profile in the annulus upstream of the diffuser inlet were caused by the intrinsic flow patterns downstream of a fan in a duct and by artificial intensification of the distortions. Azimuthal distortions or defects were generated by the addition of four artificial devices (screens and fences). Pressure recovery data indicated beneficial effects of both radial distortion (for a limited range of distortion levels) and inflow swirl. Small amounts of azimuthal distortion created by the artificial devices produced only small effects on diffuser performance. A large artificial distortion device was required to produce enough azimuthal flow distortion to significantly degrade the diffuser static pressure recovery.

Health effects of indoor odorants.

PubMed Central

Cone, J E; Shusterman, D

1991-01-01

People assess the quality of the air indoors primarily on the basis of its odors and on their perception of associated health risk. The major current contributors to indoor odorants are human occupant odors (body odor), environmental tobacco smoke, volatile building materials, bio-odorants (particularly mold and animal-derived materials), air fresheners, deodorants, and perfumes. These are most often present as complex mixtures, making measurement of the total odorant problem difficult. There is no current method of measuring human body odor, other than by human panel studies of expert judges of air quality. Human body odors have been quantitated in terms of the "olf" which is the amount of air pollution produced by the average person. Another quantitative unit of odorants is the "decipol," which is the perceived level of pollution produced by the average human ventilated by 10 L/sec of unpolluted air or its equivalent level of dissatisfaction from nonhuman air pollutants. The standard regulatory approach, focusing on individual constituents or chemicals, is not likely to be successful in adequately controlling odorants in indoor air. Besides the current approach of setting minimum ventilation standards to prevent health effects due to indoor air pollution, a standard based on the olf or decipol unit might be more efficacious as well as simpler to measure. PMID:1821378

Reduce, reuse and recycle: a green solution to Canada's medical isotope shortage.

PubMed

Galea, R; Ross, C; Wells, R G

2014-05-01

Due to the unforeseen maintenance issues at the National Research Universal (NRU) reactor at Chalk River and coincidental shutdowns of other international reactors, a global shortage of medical isotopes (in particular technetium-99m, Tc-99m) occurred in 2009. The operation of these research reactors is expensive, their age creates concerns about their continued maintenance and the process results in a large amount of long-lived nuclear waste, whose storage cost has been subsidized by governments. While the NRU has since revived its operations, it is scheduled to cease isotope production in 2016. The Canadian government created the Non-reactor based medical Isotope Supply Program (NISP) to promote research into alternative methods for producing medical isotopes. The NRC was a member of a collaboration looking into the use of electron linear accelerators (LINAC) to produce molybdenum-99 (Mo-99), the parent isotope of Tc-99m. This paper outlines NRC's involvement in every step of this process, from the production, chemical processing, recycling and preliminary animal studies to demonstrate the equivalence of LINAC Tc-99m with the existing supply. This process stems from reusing an old idea, reduces the nuclear waste to virtually zero and recycles material to create a green solution to Canada's medical isotope shortage. © 2013 Published by Elsevier Ltd.

Are services better for climate change?

PubMed

Suh, Sangwon

2006-11-01

Embodied greenhouse gas (GHG) emissions and their structure of inducement by the supply-chain networks of 480 goods and services in the United States are analyzed for 44 GHGs. Producing a dollar of a product or service generates an average of 0.36 kg of CO2 equivalent GHGs onsite, increasing to 0.83 kg when supply-chain-induced emissions are taken into account. Services produce less than 5% of total U.S. GHG emissions directly, and their direct GHG emission intensities per dollar output are much less (0.04 kg C02 equiv/dollars) than those of physical products, even when supply-chain-induced emissions are included (0.47 kg C02 equiv/dollars). When both supply-chain effects and the volume of household expenditures are taken into account, however, household consumption of services excluding electric utilities and transportation services proves to be responsible for 37.6% of total industrial GHG emissions in the United States, almost twice the amount due to household consumption of electric utility and transportation services. Given the current structure of GHG emissions, a shift to a service-oriented economy is shown to entail a decrease in GHG emission intensity per unit GDP but an increase, by necessity, in overall GHG emissions in absolute terms. The results are discussed in the context of U.S. climate change policy.

Characteristics of flocs formed by polymer-only coagulation in water treatment and their impacts on the performance of downstream membrane separation.

PubMed

Maeng, Sung Kyu; Timmes, Thomas C; Kim, Hyun-Chul

2017-10-01

Two different quaternary amine polymers were examined as primary coagulants for the removal of natural organic matter (NOM) and concurrent production of flocs favorable for downstream membrane separation. The primary issue explored was the relationship between various coagulation conditions on the floc characteristics and the subsequent performance of microfiltration when filtering coagulated NOM. The size distribution and morphological properties of flocs formed through the coagulation of NOM were characterized and the effects of polymer type and dose on these characteristics were also examined. Coagulation of NOM using polydiallyldimethyl-ammonium chloride (pDADMAC) produced looser and less settleable flocs compared to dosing the equivalent amount of epichlorohydrin/dimethylamine (epi/DMA). This was associated with the formation of a relatively denser cake layer on the top of the membrane for the filtration of NOM coagulated with epi/DMA. The charge neutralization coagulation condition with the polymers removed almost all of the fouling tendency that had occurred when filtering raw NOM. The median diameter and the fractal dimension of the flocs produced increased as the zeta potential approached zero, which resulted in the formation of a cake layer that was easily removed from the surface of the membrane.

Equivalency of the DINA Model and a Constrained General Diagnostic Model. Research Report. ETS RR-11-37

ERIC Educational Resources Information Center

von Davier, Matthias

2011-01-01

This report shows that the deterministic-input noisy-AND (DINA) model is a special case of more general compensatory diagnostic models by means of a reparameterization of the skill space and the design (Q-) matrix of item by skills associations. This reparameterization produces a compensatory model that is equivalent to the (conjunctive) DINA…

Equivalent Sensor Radiance Generation and Remote Sensing from Model Parameters. Part 1; Equivalent Sensor Radiance Formulation

NASA Technical Reports Server (NTRS)

Wind, Galina; DaSilva, Arlindo M.; Norris, Peter M.; Platnick, Steven E.

2013-01-01

In this paper we describe a general procedure for calculating equivalent sensor radiances from variables output from a global atmospheric forecast model. In order to take proper account of the discrepancies between model resolution and sensor footprint the algorithm takes explicit account of the model subgrid variability, in particular its description of the probably density function of total water (vapor and cloud condensate.) The equivalent sensor radiances are then substituted into an operational remote sensing algorithm processing chain to produce a variety of remote sensing products that would normally be produced from actual sensor output. This output can then be used for a wide variety of purposes such as model parameter verification, remote sensing algorithm validation, testing of new retrieval methods and future sensor studies. We show a specific implementation using the GEOS-5 model, the MODIS instrument and the MODIS Adaptive Processing System (MODAPS) Data Collection 5.1 operational remote sensing cloud algorithm processing chain (including the cloud mask, cloud top properties and cloud optical and microphysical properties products.) We focus on clouds and cloud/aerosol interactions, because they are very important to model development and improvement.

Calculation of greenhouse gas emissions of jatropha oil and jatropha biodiesel as alternative fuels for electricity production in Côte d'Ivoire

NASA Astrophysics Data System (ADS)

Atta, Pascal Atta; N'guessan, Yao; Morin, Celine; Voirol, Anne Jaecker; Descombes, Georges

2017-02-01

The electricity in Côte d'Ivoire is mainly produced from fossil energy sources. This causes damages on environment due to greenhouse gas emissions (GHG). The aim of this paper is to calculate the greenhouse gas (GHG) emissions of jatropha oil and jatropha biodiesel as alternative fuels for electricity production in Côte d'Ivoire by using Life Cycle Assessment (LCA) methodology. The functional unit in this LCA is defined as 1 kWh of electricity produced by the combustion of jatropha oil or jatropha biodiesel in the engine of a generator. Two scenarios, called short chain and long chain, were examined in this LCA. The results show that 0.132 kg CO2 equivalent is emitted for the scenario 1 with jatropha oil as an alternative fuel against 0.6376 kg CO2 equivalent for the scenario 2 with jatropha biodiesel as an alternative fuel. An 87 % reduction of kg CO2 equivalent is observed in scenario 1 and a 37 % reduction of kg CO2 equivalent is observed in the scenario 2, when compared with a Diesel fuel.

COMPUTER PROGRAM FOR THE NRL SATELLITE POSITION DISPLAY,

DTIC Science & Technology

NRL Satellite position Prediction And Display ( SPAD ), provides a considerable amount of display control versatility. Up to eleven satellites can be...expanded mode. A commercial equivalent of the AN/UYK-1 computer was used in the research version of SPAD . Since the program was written in a

12 CFR Appendix A to Part 3 - Risk-Based Capital Guidelines

Code of Federal Regulations, 2011 CFR

2011-01-01

... company are consolidated for accounting purposes, these assets (as well as the credit equivalent amounts... conducted or performed in the private sector of the United States economy; and non-central government... of assigning risk weights, the differentiation between OECD depository institutions and non-OECD...

12 CFR 1750.4 - Minimum capital requirement computation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... amounts: (1) 2.50 percent times the aggregate on-balance sheet assets of the Enterprise; (2) 0.45 percent times the unpaid principal balance of mortgage-backed securities and substantially equivalent... current market value of posted qualifying collateral, computed in accordance with appendix A to this...

12 CFR Appendix A to Part 3 - Risk-Based Capital Guidelines

Code of Federal Regulations, 2012 CFR

2012-01-01

... company are consolidated for accounting purposes, these assets (as well as the credit equivalent amounts... conducted or performed in the private sector of the United States economy; and non-central government... of assigning risk weights, the differentiation between OECD depository institutions and non-OECD...

12 CFR Appendix A to Part 3 - Risk-Based Capital Guidelines

Code of Federal Regulations, 2013 CFR

2013-01-01

... company are consolidated for accounting purposes, these assets (as well as the credit equivalent amounts... conducted or performed in the private sector of the United States economy; and non-central government... of assigning risk weights, the differentiation between OECD depository institutions and non-OECD...

12 CFR Appendix A to Part 3 - Risk-Based Capital Guidelines

Code of Federal Regulations, 2014 CFR

2014-01-01

... company are consolidated for accounting purposes, these assets (as well as the credit equivalent amounts... conducted or performed in the private sector of the United States economy; and non-central government... of assigning risk weights, the differentiation between OECD depository institutions and non-OECD...

12 CFR Appendix A to Part 3 - Risk-Based Capital Guidelines

Code of Federal Regulations, 2010 CFR

2010-01-01

... company are consolidated for accounting purposes, these assets (as well as the credit equivalent amounts... conducted or performed in the private sector of the United States economy; and non-central government... of assigning risk weights, the differentiation between OECD depository institutions and non-OECD...

Low loss factor Co{sub 2}Z ferrite composites with equivalent permittivity and permeability for ultra-high frequency applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Zhijuan; Chang, Hong; Sokolov, Alexander S.

2014-08-11

Ferrite composites of nominal composition Ba{sub 3}Co{sub 2+x}Ir{sub x}Fe{sub 24−2x}O{sub 41} were studied in order to achieve low magnetic and dielectric losses and equivalent permittivity and permeability over a frequency range of 0.3–1 GHz. Crystallographic structure was characterized by X-ray diffraction, which revealed a Z-type phase accompanied by increasing amounts of Y-type phase as the iridium amount was increased. The measured microwave dielectric and magnetic properties showed that the loss tan δ{sub ε} and loss tan δ{sub μ} decreased by 80% and 90% at 0.8 GHz with the addition of iridium of x = 0.12 and 0.15, respectively. An effective medium approximation was adopted to analyzemore » the composite ferrites having mixed phase structures. Moreover, adding Bi{sub 2}O{sub 3} enabled equivalent values of real permittivity and real permeability over the studied frequency range. The resultant data give rise to low loss factors, i.e., tan δ{sub ε}/ε′ = 0.008 and tan δ{sub μ}/μ′ = 0.037 at 0.8 GHz, while characteristic impedance was the same as that of free space.« less

The Effect of Mission Location on Mission Costs and Equivalent System Mass

NASA Technical Reports Server (NTRS)

Fisher, John W.; Levri, Julie

2002-01-01

It is the goal of developers of advanced life support researcher to develop technology that reduces the cost of life support for future space missions and thereby enables missions that are currently infeasible or too expensive. Because the cost of propulsion dominates the cost of hardware emplacement in space and because the mass of a deliverable object controls its propulsive requirements, equivalent system mass (ESM) is used as a means for accounting for mission costs. ESM is typically calculated by adding to the actual mass the equivalent amount of mass that must be added to a mission due to other characteristics of a piece of hardware such as the item s volume or energy requirements. This approach works well for comparing different pieces of hardware when they go to the same location in space. However, different locations in mission space such low Earth orbit, Mars surface, or full trip to Mars and return to low Earth orbit require vastly different amounts of propulsion. Moving an object from Earth surface to the Martian surface and returning it to Earth will require as much as 100 times the propulsion that is required to move the object to low Earth orbit only. This paper presents the case for including the effect that location can have on cost as a part of ESM and suggests a method for achieving this improvement of ESM.

Environmental Effects on Non-oxide Ceramics

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.; Opila, Elizabeth J.

1997-01-01

Non-oxide ceramics such as silicon carbide (SiC) and silicon nitride (Si3N4) are promising materials for a wide range of high temperature applications. These include such diverse applications as components for heat engines, high temperature electronics, and re-entry shields for space vehicles. Table I lists a number of selected applications. Most of the emphasis here will be on SiC and Si3N4. Where appropriate, other non-oxide materials such as aluminum nitride (AlN) and boron nitride (BN) will be discussed. Proposed materials include both monolithic ceramics and composites. Composites are treated in more detail elsewhere in this volume, however, many of the oxidation/corrosion reactions discussed here can be extended to composites. In application these materials will be exposed to a wide variety of environments. Table I also lists reactive components of these environments.It is well-known that SiC and Si3N4 retain their strength to high temperatures. Thus these materials have been proposed for a variety of hot-gas-path components in combustion applications. These include heat exchanger tubes, combustor liners, and porous filters for coal combustion products. All combustion gases contain CO2, CO, H2, H2O, O2, and N2. The exact gas composition is dependent on the fuel to air ratio or equivalence ratio. (Equivalence ratio (EQ) is a fuel-to-air ratio, with total hydrocarbon content normalized to the amount of O2 and defined by EQ=1 for complete combustion to CO2 and H2O). Figure 1 is a plot of equilibrium gas composition vs. equivalence ratio. Note that as a general rule, all combustion atmospheres are about 10% water vapor and 10% CO2. The amounts of CO, H2, and O2 are highly dependent on equivalence ratio.

Increased oxidative stress in preschool children exposed to passive smoking.

PubMed

Yıldırım, Faruk; Sermetow, Kabil; Aycicek, Ali; Kocyigit, Abdurrahim; Erel, Ozcan

2011-01-01

To study the effect of passive cigarette smoking on plasma oxidative and antioxidative status in passive smoking preschool children and to compare them with controls. Thirty-four passive smoking (five to 50 cigarettes per day) preschool children (study group) and 32 controls who had never been exposed to cigarette smoke were randomly chosen from children aged from 4 to 6 years. Urinary cotinine and plasma indicators of oxidative and antioxidative status, i.e., total oxidant status (TOS), total antioxidant capacity (TAC), and oxidative stress index (OSI), were determined. Mean environmental cigarette consumption was 22±13 cigarettes per day in passive smoking children. Mean urinary cotinine levels were 77.6±41.4 ng/mL and 11.9±2.3 ng/mL in the study and control groups, respectively (p < 0.001). Mean plasma TAC levels were 0.95±0.13 mmol Trolox equivalent/L and 1.01±0.09 mmol Trolox equivalent/L, respectively (p = 0.039). Mean plasma TOS levels were 28.6±7.9 µmol H2O2 equivalent/L and 18.5±6.3 µmol H2O2 equivalent/L, respectively (p < 0.001). Mean OSI levels were 3.08±0.98 arbitrary units and 1.84±0.64 arbitrary units, respectively (p < 0.001). A small amount of cigarette smoke (five to 10 cigarettes per day) causes considerable oxidative stress. There were significant correlations between number of cigarettes consumed and oxidant status and OSI levels. Passive smoke is a potent oxidant in preschool children. Its deleterious effects are not limited just to heavy passive smoking, but also occur with exposure to small amounts of smoke.

10 CFR 35.63 - Determination of dosages of unsealed byproduct material for medical use.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or equivalent Agreement... State requirements; or (ii) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or...

10 CFR 35.63 - Determination of dosages of unsealed byproduct material for medical use.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or equivalent Agreement... State requirements; or (ii) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or...

10 CFR 35.63 - Determination of dosages of unsealed byproduct material for medical use.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or equivalent Agreement... State requirements; or (ii) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or...

10 CFR 35.63 - Determination of dosages of unsealed byproduct material for medical use.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or equivalent Agreement... State requirements; or (ii) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or...

10 CFR 35.63 - Determination of dosages of unsealed byproduct material for medical use.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or equivalent Agreement... State requirements; or (ii) A PET radioactive drug producer licensed under § 30.32(j) of this chapter or...

A Comparison of Component and Factor Patterns: A Monte Carlo Approach.

ERIC Educational Resources Information Center

Velicer, Wayne F.; And Others

1982-01-01

Factor analysis, image analysis, and principal component analysis are compared with respect to the factor patterns they would produce under various conditions. The general conclusion that is reached is that the three methods produce results that are equivalent. (Author/JKS)

Assessment of apically extruded debris produced by the single-file ProTaper F2 technique under reciprocating movement.

PubMed

De-Deus, Gustavo; Brandão, Maria Claudia; Barino, Bianca; Di Giorgi, Karina; Fidel, Rivail Antonio Sergio; Luna, Aderval Severino

2010-09-01

This study was designed to quantitatively evaluate the amount of dentin debris extruded from the apical foramen by comparing the conventional sequence of the ProTaper Universal nickel-titanium (NiTi) files with the single-file ProTaper F2 technique. Thirty mesial roots of lower molars were selected, and the use of different instrumentation techniques resulted in 3 groups (n=10 each). In G1, a crown-down hand-file technique was used, and in G2 conventional ProTaper Universal technique was used. In G3, ProTaper F2 file was used in a reciprocating motion. The apical finish preparation was equivalent to ISO size 25. An apparatus was used to evaluate the apically extruded debris. Statistical analysis was performed using 1-way analysis of variance and Tukey multiple comparisons. No significant difference was found in the amount of the debris extruded between the conventional sequence of the ProTaper Universal NiTi files and the single-file ProTaper F2 technique (P>.05). In contrast, the hand instrumentation group extruded significantly more debris than both NiTi groups (P<.05). The present results yielded favorable input for the F2 single-file technique in terms of apically extruded debris, inasmuch as it is the most simple and cost-effective instrumentation approach. Copyright (c) 2010 Mosby, Inc. All rights reserved.

Tungsten erosion by unipolar arcing in DIII-D

NASA Astrophysics Data System (ADS)

Bykov, I.; Chrobak, C. P.; Abrams, T.; Rudakov, D. L.; Unterberg, E. A.; Wampler, W. R.; Hollmann, E. M.; Moyer, R. A.; Boedo, J. A.; Stahl, B.; Hinson, E. T.; Yu, J. H.; Lasnier, C. J.; Makowski, M.; McLean, A. G.

2017-12-01

Unipolar arcing was an important mechanism of metal surface erosion during the recently conducted Metal Rings Campaign in DIII-D when two toroidally continuous tile rings with 5 cm wide W-coated TZM inserts were installed in graphite tiles in the lower divertor, one on the floor and one on the shelf. Most of the arc damage occurred on the shelf ring. The total amount of W removed by arcing from the affected ˜4% of the shelf ring area was estimated ˜0.8 × 1021 at., about half of the total amount of W eroded and redeposited outside the inserts (1.8 ± 0.9)×1021 at. The rings were exposed for a total of ˜480 discharges, an equivalent of plasma time on W surfaces (with {{I}}{{p}}> 0.5 MA) ˜103 s. Arcing was monitored in situ with WI (400.9 nm) filtered camera and photomultipliers and showed that: (i) arcing only occurred during ELMs and disruptions, (ii) arcing rate was much lower on the floor than on the shelf ring, and (iii) arcing had a low cut off power flux density about 2 MW m-2. About half of arc tracks had large {10}\\circ pitch angle and probably were produced during disruptions. Such tracks were only found on the shelf. Moderate toroidal variation of the arc track density and W erosion with nearly n = 1 pattern has been measured.

Equivalent Air Spring Suspension Model for Quarter-Passive Model of Passenger Vehicles

PubMed Central

Abid, Haider J.; Chen, Jie; Nassar, Ameen A.

2015-01-01

This paper investigates the GENSIS air spring suspension system equivalence to a passive suspension system. The SIMULINK simulation together with the OptiY optimization is used to obtain the air spring suspension model equivalent to passive suspension system, where the car body response difference from both systems with the same road profile inputs is used as the objective function for optimization (OptiY program). The parameters of air spring system such as initial pressure, volume of bag, length of surge pipe, diameter of surge pipe, and volume of reservoir are obtained from optimization. The simulation results show that the air spring suspension equivalent system can produce responses very close to the passive suspension system. PMID:27351020

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: a case for England.

PubMed

Papageorgiou, A; Barton, J R; Karagiannidis, A

2009-07-01

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.

Grazing intensity affects the environmental impact of dairy systems.

PubMed

Aguirre-Villegas, H A; Passos-Fonseca, T H; Reinemann, D J; Larson, R

2017-08-01

Dairy products are major components of the human diet but are also important contributors to global environmental impacts. This study evaluated greenhouse gas (GHG) emissions, net energy intensity (NEI), and land use of confined dairy systems with increasing levels of pasture in the diet. A Wisconsin farm was modeled to represent practices adopted by dairy operations in a humid continental climate typical in the Great Lakes region and other climates that have large differences in seasonal temperatures. Five grazing scenarios (all of which contained some portion of confinement) were modeled based on different concentrations of dry matter intake from pasture and feed supplementation from corn grain, corn silage, and soybean meal. Scenarios that incorporate grazing consisted of 5 mo of pasture feeding from May to September and 7 mo of confined feeding from October to April. Environmental impacts were compared within the 5 scenarios that incorporate grazing and across 2 entirely confined scenarios with and without on-farm electricity production through anaerobic digestion (AD). To conduct a fair comparison, all scenarios were evaluated based on the same total amount of milk produced per day where resource inputs were adjusted according to the characteristics of each scenario. A cradle-to-farm gate life cycle assessment evaluated the environmental burdens that were partitioned by allocation between milk and meat and by system expansion when biogas-based electricity was produced. Overall, results for all scenarios were comparable. Enteric methane was the greatest contributor to GHG emissions, and the production of crops was the most energy-intense process. For the confined scenario without AD, GHG emissions were 0.87 kg of CO 2 equivalents, NEI was 1.59 MJ, and land use was 1.59 m 2 /kg of fat- and protein-corrected milk (FPCM). Anaerobic digestion significantly reduced emissions to 0.28 kg of CO 2 equivalents/kg of FPCM and reduced NEI to -1.26 MJ/kg of FPCM, indicating a net energy producing system and highlighting the potential of AD to improve the sustainability of confined systems. For scenarios that combined confinement and grazing, GHG emissions ranged from 0.84 to 0.92 kg of CO 2 equivalents, NEI ranged from 1.42 to 1.59 MJ, and land use ranged from 1.19 to 1.26 m 2 /kg of FPCM. All environmental impacts were minimized in scenarios that supplemented enough feed to increase milk yield but maintained dry matter intake from pasture at a level high enough to reduce material and energy use. The Authors. Published by the Federation of Animal Science Societies and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

40 CFR 35.925-13 - Sewage collection system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... design capacity equivalent to that of the existing system plus a reasonable amount for future growth. For purposes of this section, a community would include any area with substantial human habitation on October... October 18, 1972; (b) The collection system is cost-effective; (c) The population density of the area to...

40 CFR 35.925-13 - Sewage collection system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... design capacity equivalent to that of the existing system plus a reasonable amount for future growth. For purposes of this section, a community would include any area with substantial human habitation on October... October 18, 1972; (b) The collection system is cost-effective; (c) The population density of the area to...

26 CFR 1.401(a)(4)-8 - Cross-testing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of rate groups; and (B) For plan years beginning on or after January 1, 2002, the plan satisfies one... tests for nondiscrimination based on individual equivalent accrual or allocation rates determined under... satisfied on a design basis. (b) Nondiscrimination in amount of benefits provided under a defined...

26 CFR 1.401(a)(4)-8 - Cross-testing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of rate groups; and (B) For plan years beginning on or after January 1, 2002, the plan satisfies one... tests for nondiscrimination based on individual equivalent accrual or allocation rates determined under... satisfied on a design basis. (b) Nondiscrimination in amount of benefits provided under a defined...

26 CFR 1.401(a)(4)-8 - Cross-testing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of rate groups; and (B) For plan years beginning on or after January 1, 2002, the plan satisfies one... tests for nondiscrimination based on individual equivalent accrual or allocation rates determined under... satisfied on a design basis. (b) Nondiscrimination in amount of benefits provided under a defined...

26 CFR 1.401(a)(4)-8 - Cross-testing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of rate groups; and (B) For plan years beginning on or after January 1, 2002, the plan satisfies one... tests for nondiscrimination based on individual equivalent accrual or allocation rates determined under... satisfied on a design basis. (b) Nondiscrimination in amount of benefits provided under a defined...

42 CFR 422.252 - Terminology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... § 422.252 Terminology. Annual MA capitation rate means a county payment rate for an MA local area... to refer to the annual MA capitation rate. MA local area means a payment area consisting of county or equivalent area specified by CMS. MA monthly basic beneficiary premium means the premium amount an MA plan...

--No Title--

Science.gov Websites

| |----------|--------|----------------------------------------------------------| | | | | | GFSCLS1 | A60243 | TABLE A ENTRY - GFSMODEL MESSAGES | | | | | | HEADR | 362001 | TABLE D ENTRY - PROFILE COORDINATES | | PROFILE | 362002 | TABLE D ENTRY - PROFILE DATA | | CLS1 | 362003 | TABLE D ENTRY - SURFACE | TABLE B ENTRY - SNOW WATER EQUIVALENT | | LCLD | 020051 | TABLE B ENTRY - AMOUNT OF LOW CLOUD | | MCLD

12 CFR 615.5210 - Risk-adjusted assets.

Code of Federal Regulations, 2010 CFR

2010-01-01

... appropriate credit conversion factor in § 615.5212, is assigned to one of the risk categories specified in... risk-based capital requirement for the credit-enhanced assets, the risk-based capital required under..., determine the appropriate risk weight for any asset or credit equivalent amount that does not fit wholly...

48 CFR 752.242-70 - Periodic progress reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... interpreted as “task order” or “delivery order” when this clause is used in an indefinite-delivery contract... may be used by USAID personnel or their authorized representatives when evaluating the contractor's... contracting officer may withhold from payment an amount not to exceed US$25,000 (or local currency equivalent...

44 CFR 206.116 - Recovery of funds.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Recovery of funds. 206.116 Section 206.116 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF... recoveries from any other source an amount equivalent to the value of the assistance provided. In no event...

12 CFR 1750.4 - Minimum capital requirement computation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... amounts: (1) 2.50 percent times the aggregate on-balance sheet assets of the Enterprise; (2) 0.45 percent times the unpaid principal balance of mortgage-backed securities and substantially equivalent... last day of the quarter just ended (or the date for which the minimum capital report is filed, if...

A CONCEPTUAL MODEL FOR EVALUATING RELATIVE POTENCY DATA FOR USE IN ECOLOGICAL RISK ASSESSMENTS

EPA Science Inventory

For chemicals with a common mechanism of toxicity, relative potency factors (RPFs) allow dose and exposure measures to be normalized to an equivalent toxicity amount of a model chemical... In ecological risk assessments the large number of possible target species, variety of expo...

Synthetic Glycolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lobo, Raul F

2010-09-20

Recently, two groups separately reported what amounts to a synthetic version of glycolysis. The sum of these two reactions is equivalent to what is accomplished in living organisms by glycolysis in terms of the redistribution of oxidation states of the carbon, and is an important step in reproducing using chemical routes that living organisms accomplish daily.

76 FR 13022 - Proposed Information Collection (Regulation for Submission of Evidence); Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... furnished to veterans with non- service-connected conditions. DATES: Written comments and recommendations on... liable for reimbursing VA for care and services VA provided to veterans with non-service-connected... equivalent private sector provider payment amount for the same care or services VA provided. Affected Public...

31 CFR 515.551 - Joint bank accounts.

Code of Federal Regulations, 2014 CFR

2014-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY CUBAN ASSETS CONTROL REGULATIONS Licenses... more of the persons in whose names the account is held is a blocked national, where a non-blocked... equivalent to that portion of the total amount to which the applicant would be entitled if the total were...

31 CFR 515.551 - Joint bank accounts.

Code of Federal Regulations, 2011 CFR

2011-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY CUBAN ASSETS CONTROL REGULATIONS Licenses... more of the persons in whose names the account is held is a blocked national, where a non-blocked... equivalent to that portion of the total amount to which the applicant would be entitled if the total were...

31 CFR 515.551 - Joint bank accounts.

Code of Federal Regulations, 2012 CFR

2012-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY CUBAN ASSETS CONTROL REGULATIONS Licenses... more of the persons in whose names the account is held is a blocked national, where a non-blocked... equivalent to that portion of the total amount to which the applicant would be entitled if the total were...

31 CFR 515.551 - Joint bank accounts.

Code of Federal Regulations, 2013 CFR

2013-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY CUBAN ASSETS CONTROL REGULATIONS Licenses... more of the persons in whose names the account is held is a blocked national, where a non-blocked... equivalent to that portion of the total amount to which the applicant would be entitled if the total were...

31 CFR 515.551 - Joint bank accounts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY CUBAN ASSETS CONTROL REGULATIONS Licenses... more of the persons in whose names the account is held is a blocked national, where a non-blocked... equivalent to that portion of the total amount to which the applicant would be entitled if the total were...

Backscatter laser depolarization studies of simulated stratospheric aerosols - Crystallized sulfuric acid droplets

NASA Technical Reports Server (NTRS)

Sassen, Kenneth; Zhao, Hongjie; Yu, Bing-Kun

1989-01-01

The optical depolarizing properties of simulated stratospheric aerosols were studied in laboratory laser (0.633 micrometer) backscattering experiments for application to polarization lidar observations. Clouds composed of sulfuric acid solution droplets, some treated with ammonia gas, were observed during evaporation. The results indicate that the formation of minute ammonium sulfate particles from the evaporation of acid droplets produces linear depolarization ratios of beta equivalent to 0.02, but beta equivalent to 0.10 to 0.15 are generated from aged acid cloud aerosols and acid droplet crystalization effects following the introduction of ammonia gas into the chamber. It is concluded that partially crystallized sulfuric acid droplets are a likely candidate for explaining the lidar beta equivalent to 0.10 values that have been observed in the lower stratosphere in the absence of the relatively strong backscattering from homogeneous sulfuric acid droplet (beta equivalent to 0) or ice crystal (beta equivalent to 0.5) clouds.

Backscatter laser depolarization studies of simulated stratospheric aerosols: Crystallized sulfuric acid droplets

NASA Technical Reports Server (NTRS)

Sassen, Kenneth; Zhao, Hongjie; Yu, Bing-Kun

1988-01-01

The optical depolarizing properties of simulated stratospheric aerosols were studied in laboratory laser (0.633 micrometer) backscattering experiments for application to polarization lidar observations. Clouds composed of sulfuric acid solution droplets, some treated with ammonia gas, were observed during evaporation. The results indicate that the formation of minute ammonium sulfate particles from the evaporation of acid droplets produces linear depolarization ratios of beta equivalent to 0.02, but beta equivalent to 0.10 to 0.15 are generated from aged acid cloud aerosols and acid droplet crystallization effects following the introduction of ammonia gas into the chamber. It is concluded that partially crystallized sulfuric acid droplets are a likely candidate for explaining the lidar beta equivalent to 0.10 values that have been observed in the lower stratosphere in the absence of the relatively strong backscattering from homogeneous sulfuric acid droplet (beta equivalent to 0) or ice crystal (beta equivalent to 0.5) clouds.

Distinguishing Provenance Equivalence of Earth Science Data

NASA Technical Reports Server (NTRS)

Tilmes, Curt; Yesha, Ye; Halem, M.

2010-01-01

Reproducibility of scientific research relies on accurate and precise citation of data and the provenance of that data. Earth science data are often the result of applying complex data transformation and analysis workflows to vast quantities of data. Provenance information of data processing is used for a variety of purposes, including understanding the process and auditing as well as reproducibility. Certain provenance information is essential for producing scientifically equivalent data. Capturing and representing that provenance information and assigning identifiers suitable for precisely distinguishing data granules and datasets is needed for accurate comparisons. This paper discusses scientific equivalence and essential provenance for scientific reproducibility. We use the example of an operational earth science data processing system to illustrate the application of the technique of cascading digital signatures or hash chains to precisely identify sets of granules and as provenance equivalence identifiers to distinguish data made in an an equivalent manner.

Computational micromechanics of woven composites

NASA Technical Reports Server (NTRS)

Hopkins, Dale A.; Saigal, Sunil; Zeng, Xiaogang

1991-01-01

The bounds on the equivalent elastic material properties of a composite are presently addressed by a unified energy approach which is valid for both unidirectional and 2D and 3D woven composites. The unit cell considered is assumed to consist, first, of the actual composite arrangement of the fibers and matrix material, and then, of an equivalent pseudohomogeneous material. Equating the strain energies due to the two arrangements yields an estimate of the upper bound for the material equivalent properties; successive increases in the order of displacement field that is assumed in the composite arrangement will successively produce improved upper bound estimates.

Catalytic EGR-Loop Reforming for High Efficiency in a Stoichiometric SI Engine through TCR and Dilution Limit Extension. 1. Catalyst Performance and Fuel Effects

DOE PAGES

Chang, Yan; Szybist, James P.; Pihl, Josh A.; ...

2017-12-19

The use of fuel reformate from catalytic processes is known to have beneficial effects on the spark-ignited (SI) combustion process through enhanced dilution tolerance and decreased combustion duration, but in many cases reformate generation can incur a significant fuel penalty. Here, in this two-part investigation, we demonstrate that efficient catalytic fuel reforming can result in improved brake engine efficiency while maintaining stoichiometric exhaust under the right conditions. In part one of this investigation, we used a combination of thermodynamic equilibrium calculations and experimental fuel catalytic reforming measurements on an engine to characterize the best possible reforming performance and energetics overmore » a range of equivalence ratios and O 2 concentrations. Ideally, one might expect the highest levels of thermochemical recuperation for the highest catalyst equivalence ratios. However, reforming under these conditions is highly endothermic, and the available enthalpy for reforming is constrained. Thus for relatively high equivalence ratios, more methane and less H 2 and CO are produced. Our experiments revealed that this suppression of H 2 and CO could be countered by adding small amounts of O 2, yielding as much as 15 vol % H 2 at the catalyst outlet for 4 < Φ catalyst < 7 under quasi-steady-state conditions. Under these conditions the H 2 and CO yields were highest and there was significant water consumption, confirming the presence of steam reforming reactions. Analyses of the experimental catalyst measurements indicated the possibility of both endothermic and exothermic reaction stages and global reaction rates sufficient to enable the utilization of higher space velocities than those employed in our experiments. Finally, in a companion paper detailing part two of this investigation, we present results for the engine dilution tolerance and brake engine efficiency impacts of the reforming levels achieved.« less

Catalytic EGR-Loop Reforming for High Efficiency in a Stoichiometric SI Engine through TCR and Dilution Limit Extension. 1. Catalyst Performance and Fuel Effects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Yan; Szybist, James P.; Pihl, Josh A.

The use of fuel reformate from catalytic processes is known to have beneficial effects on the spark-ignited (SI) combustion process through enhanced dilution tolerance and decreased combustion duration, but in many cases reformate generation can incur a significant fuel penalty. Here, in this two-part investigation, we demonstrate that efficient catalytic fuel reforming can result in improved brake engine efficiency while maintaining stoichiometric exhaust under the right conditions. In part one of this investigation, we used a combination of thermodynamic equilibrium calculations and experimental fuel catalytic reforming measurements on an engine to characterize the best possible reforming performance and energetics overmore » a range of equivalence ratios and O 2 concentrations. Ideally, one might expect the highest levels of thermochemical recuperation for the highest catalyst equivalence ratios. However, reforming under these conditions is highly endothermic, and the available enthalpy for reforming is constrained. Thus for relatively high equivalence ratios, more methane and less H 2 and CO are produced. Our experiments revealed that this suppression of H 2 and CO could be countered by adding small amounts of O 2, yielding as much as 15 vol % H 2 at the catalyst outlet for 4 < Φ catalyst < 7 under quasi-steady-state conditions. Under these conditions the H 2 and CO yields were highest and there was significant water consumption, confirming the presence of steam reforming reactions. Analyses of the experimental catalyst measurements indicated the possibility of both endothermic and exothermic reaction stages and global reaction rates sufficient to enable the utilization of higher space velocities than those employed in our experiments. Finally, in a companion paper detailing part two of this investigation, we present results for the engine dilution tolerance and brake engine efficiency impacts of the reforming levels achieved.« less

Electro-optical equivalent calibration technology for high-energy laser energy meters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Ji Feng, E-mail: wjfcom2000@163.com; Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900; Graduate School of China Academy of Engineering Physics, Beijing 100088

Electro-optical equivalent calibration with high calibration power and high equivalence is particularly well-suited to the calibration of high-energy laser energy meters. A large amount of energy is reserved during this process, however, which continues to radiate after power-off. This study measured the radiation efficiency of a halogen tungsten lamp during power-on and after power-off in order to calculate the total energy irradiated by a lamp until the high-energy laser energy meter reaches thermal equilibrium. A calibration system was designed based on the measurement results, and the calibration equivalence of the system was analyzed in detail. Results show that measurement precisionmore » is significantly affected by the absorption factor of the absorption chamber and by heat loss in the energy meter. Calibration precision is successfully improved by enhancing the equivalent power and reducing power-on time. The electro-optical equivalent calibration system, measurement uncertainty of which was evaluated as 2.4% (k = 2), was used to calibrate a graphite-cone-absorption-cavity absolute energy meter, yielding a calibration coefficient of 1.009 and measurement uncertainty of 3.5% (k = 2). A water-absorption-type high-energy laser energy meter with measurement uncertainty of 4.8% (k = 2) was considered the reference standard, and compared to the energy meter calibrated in this study, yielded a correction factor of 0.995 (standard deviation of 1.4%).« less

Overview of SBIR Phase II Work on Hollow Graphite Fibers

NASA Technical Reports Server (NTRS)

Stallcup, Michael; Brantley, Lott W. (Technical Monitor)

2001-01-01

Ultra-Lightweight materials are enabling for producing space based optical components and support structures. Heretofore, innovative designs using existing materials has been the approach to produce lighter-weight optical systems. Graphite fiber reinforced composites, because of their light weight, have been a material of frequent choice to produce space based optical components. Hollow graphite fibers would be lighter than standard solid graphite fibers and, thus, would save weight in optical components. The Phase I SBIR program demonstrated it is possible to produce hollow carbon fibers that have strengths up to 4.2 GPa which are equivalent to commercial fibers, and composites made from the hollow fibers had substantially equivalent composite strengths as commercial fiber composites at a 46% weight savings. The Phase II SBIR program will optimize processing and properties of the hollow carbon fiber and scale-up processing to produce sufficient fiber for fabricating a large ultra-lightweight mirror for delivery to NASA. Information presented here includes an overview of the strength of some preliminary hollow fibers, photographs of those fibers, and a short discussion of future plans.

27 CFR 19.245 - Bonds and penal sums of bonds.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Distiller The amount of tax on spirits produced during a period of 15 days $5,000 $100,000 (ii) Warehouseman... gallons ......do 5,000 50,000 (iii) Distiller and warehouseman The amount of tax on spirits produced... transit to bonded premises 10,000 200,000 (iv) Distiller and processor The amount of tax on spirits...

A numerical solution of a singular boundary value problem arising in boundary layer theory.

PubMed

Hu, Jiancheng

2016-01-01

In this paper, a second-order nonlinear singular boundary value problem is presented, which is equivalent to the well-known Falkner-Skan equation. And the one-dimensional third-order boundary value problem on interval [Formula: see text] is equivalently transformed into a second-order boundary value problem on finite interval [Formula: see text]. The finite difference method is utilized to solve the singular boundary value problem, in which the amount of computational effort is significantly less than the other numerical methods. The numerical solutions obtained by the finite difference method are in agreement with those obtained by previous authors.

Sample Size for Biosimilar Trials: In Defense of Synthesis.

PubMed

Clark, Timothy; Jo, Sook Jung; Phillips, Alan

2018-05-01

Biosimilars are biological products similar to, but not the same as, the innovator products. Both the European Medicines Agency and the Food and Drug Administration have released detailed guidance on the development of biosimilars. This guidance requires the pivotal phase 3 clinical study to have an equivalence design, which means that the study objective is to demonstrate that one treatment is neither "worse than" nor "better than" the other by some "clinically unimportant" amount. The most critical and controversial step in designing such a study is the choice of equivalence margin, as this determines the conclusion of the study. In this paper, we outline the methodology for determining an equivalence margin and, through case studies on biosimilar trastuzumab (HERCEPTIN ) and biosimilar bevacizumab (AVASTIN), explain the challenges of applying this in practice and why the synthesis method should be given greater consideration by regulatory authorities and biosimilar developers.

Multiplicity of genome equivalents in the radiation-resistant bacterium Micrococcus radiodurans.

PubMed Central

Hansen, M T

1978-01-01

The complexity of the genome of Micrococcus radiodurans was determined to be (2.0 +/- 0.3) X 10(9) daltons by DNA renaturation kinetics. The number of genome equivalents of DNA per cell was calculated from the complexity and the content of DNA. A lower limit of four genome equivalents per cell was approached with decreasing growth rate. Thus, no haploid stage appeared to be realized in this organism. The replication time was estimated from the kinetics and amount of residual DNA synthesis after inhibiting initiation of new rounds of replication. From this, the redundancy of terminal genetic markers was calculated to vary with growth rate from four to approximately eight copies per cell. All genetic material, including the least abundant, is thus multiply represented in each cell. The potential significance of the maintenance in each cell of multiple gene copies is discussed in relation to the extreme radiation resistance of M. radiodurans. PMID:649572

78 FR 75337 - Eos LNG LLC; Application for Long-Term Authorization To Export Liquefied Natural Gas Produced...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... Authorization To Export Liquefied Natural Gas Produced From Domestic Natural Gas Resources to Non-Free Trade...- contract authorization to export LNG produced from domestic sources in a volume equivalent to approximately... treatment for trade in natural gas (non-FTA countries) with which trade is not prohibited by U.S. law or...

78 FR 75339 - Barca LNG LLC; Application for Long-Term Authorization To Export Liquefied Natural Gas Produced...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... Authorization To Export Liquefied Natural Gas Produced From Domestic Natural Gas Resources to Non-Free Trade...- contract authorization to export LNG produced from domestic sources in a volume equivalent to approximately... treatment for trade in natural gas (non-FTA countries) with which trade is not prohibited by U.S. law or...

Human Systems Modeling and Simulation

DTIC Science & Technology

2005-12-01

the formation of new practices. Mimesis is a process of observing manifested behavior, then building a practice that can produce a semblance of what...produce an image of – the behavior of others. Equivalently, mimesis is the foundational learning mechanism. o E.g., we become ourselves, and adapt to

Stabilized pigment and method for producing the same

NASA Technical Reports Server (NTRS)

Morrison, Stanley Roy (Inventor); Freund, Thomas (Inventor)

1976-01-01

A chemical species, present in two oxidation states which differ from one another by one equivalent, is added to pigment materials to serve as a recombination center for alternately capturing electrons and holes produced by the pigment materials when they are subjected to ultraviolet light exposure.

Contextual control using a go/no-go procedure with compound abstract stimuli.

PubMed

Modenesi, Rafael Diego; Debert, Paula

2015-05-01

Contextual control has been described as (1) a five-term contingency, in which the contextual stimulus exerts conditional control over conditional discriminations, and (2) allowing one stimulus to be a member of different equivalence classes without merging them into one. Matching-to-sample is the most commonly employed procedure to produce and study contextual control. The present study evaluated whether the go/no-go procedure with compound stimuli produces equivalence classes that share stimuli. This procedure does not allow the identification of specific stimulus functions (e.g., contextual, conditional, or discriminative functions). If equivalence classes were established with this procedure, then only the latter part of the contextual control definition (2) would be met. Six undergraduate students participated in the present study. In the training phases, responses to AC, BD, and XY compounds with stimuli from the same classes were reinforced, and responses to AC, BD, and XY compounds with stimuli from different classes were not. In addition, responses to X1A1B1, X1A2B2, X2A1B2, and X2A2B1 compounds were reinforced and responses to the other combinations were not. During the tests, the participants had to respond to new combinations of stimuli compounds YCD to indicate the formation of four equivalence classes that share stimuli: X1A1B1Y1C1D1, X1A2B2Y1C2D2, X2A1B2Y2C1D2, and X2A2B1Y2C2D1. Four of the six participants showed the establishment of these classes. These results indicate that establishing contextual stimulus functions is unnecessary to produce equivalence classes that share stimuli. Therefore, these results are inconsistent with the first part of the definition of contextual control. © Society for the Experimental Analysis of Behavior.

Equivalent model construction for a non-linear dynamic system based on an element-wise stiffness evaluation procedure and reduced analysis of the equivalent system

NASA Astrophysics Data System (ADS)

Kim, Euiyoung; Cho, Maenghyo

2017-11-01

In most non-linear analyses, the construction of a system matrix uses a large amount of computation time, comparable to the computation time required by the solving process. If the process for computing non-linear internal force matrices is substituted with an effective equivalent model that enables the bypass of numerical integrations and assembly processes used in matrix construction, efficiency can be greatly enhanced. A stiffness evaluation procedure (STEP) establishes non-linear internal force models using polynomial formulations of displacements. To efficiently identify an equivalent model, the method has evolved such that it is based on a reduced-order system. The reduction process, however, makes the equivalent model difficult to parameterize, which significantly affects the efficiency of the optimization process. In this paper, therefore, a new STEP, E-STEP, is proposed. Based on the element-wise nature of the finite element model, the stiffness evaluation is carried out element-by-element in the full domain. Since the unit of computation for the stiffness evaluation is restricted by element size, and since the computation is independent, the equivalent model can be constructed efficiently in parallel, even in the full domain. Due to the element-wise nature of the construction procedure, the equivalent E-STEP model is easily characterized by design parameters. Various reduced-order modeling techniques can be applied to the equivalent system in a manner similar to how they are applied in the original system. The reduced-order model based on E-STEP is successfully demonstrated for the dynamic analyses of non-linear structural finite element systems under varying design parameters.

Dose equivalent near the bone-soft tissue interface from nuclear fragments produced by high-energy protons

NASA Technical Reports Server (NTRS)

Shavers, M. R.; Poston, J. W.; Cucinotta, F. A.; Wilson, J. W.

1996-01-01

During manned space missions, high-energy nucleons of cosmic and solar origin collide with atomic nuclei of the human body and produce a broad linear energy transfer spectrum of secondary particles, called target fragments. These nuclear fragments are often more biologically harmful than the direct ionization of the incident nucleon. That these secondary particles increase tissue absorbed dose in regions adjacent to the bone-soft tissue interface was demonstrated in a previous publication. To assess radiological risks to tissue near the bone-soft tissue interface, a computer transport model for nuclear fragments produced by high energy nucleons was used in this study to calculate integral linear energy transfer spectra and dose equivalents resulting from nuclear collisions of 1-GeV protons transversing bone and red bone marrow. In terms of dose equivalent averaged over trabecular bone marrow, target fragments emitted from interactions in both tissues are predicted to be at least as important as the direct ionization of the primary protons-twice as important, if recently recommended radiation weighting factors and "worst-case" geometry are used. The use of conventional dosimetry (absorbed dose weighted by aa linear energy transfer-dependent quality factor) as an appropriate framework for predicting risk from low fluences of high-linear energy transfer target fragments is discussed.

40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

Code of Federal Regulations, 2011 CFR

2011-07-01

... specified in the post-loading evaluation test (§ 53.62, § 53.63, or § 53.64). § 53.66 Volatility Test... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr...

40 CFR Table F-1 to Subpart F of... - Performance Specifications for PM2.5 Class II Equivalent Samplers

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified in the post-loading evaluation test (§ 53.62, § 53.63, or § 53.64). § 53.66 Volatility Test... Equivalent Samplers Performance test Specifications Acceptance criteria § 53.62 Full Wind Tunnel Evaluation...: 95% ≤ Rc ≤ 105%. § 53.63 Wind Tunnel Inlet Aspiration Test Liquid VOAG produced aerosol at 2 km/hr...

Equivalence of different definitions of the surface tension

NASA Astrophysics Data System (ADS)

Jug, Giancarlo; Jasnow, David

1985-02-01

Recently Brézin and Feng and independently Pant reported renormalization-group calculations of a universal amplitude ratio involving the surface tension, σ, defined as the free-energy difference produced by appropriate boundary conditions. Here we comment on an equivalent result obtained, within the same one-loop framework, using an alternative definition of σ involving the free-energy increment due to a macroscopic distortion of a flat interface.

Demonstration of a Bias Tunable Quantum Dots-in-a-Well Focal Plane Array

DTIC Science & Technology

2009-01-01

uniformity and mea- sured noise equivalent temperature difference for the double DWELL devices is computed and compared to the same results from the original...first generation DWELL. Finally, higher temperature operation is explored. Overall, the double DWELL devices had lower noise equivalent temperature...infrared photodetectors ( QWIPs ) with various doping and impurities have produced FPAs capable of detection across much of the infrared spectrum from

Radar Cross Section Prediction for Coated Perfect Conductors with Arbitrary Geometries.

DTIC Science & Technology

1986-01-01

equivalent electric and magnetic surface currents as the desired unknowns. Triangular patch modelling is ap- plied to the boundary surfaces. The method of...matrix inversion for the unknown surface current coefficients. Huygens’ principle is again applied to calculate the scattered electric field produced...differential equations with the equivalent electric and magnetic surface currents as the desired unknowns. Triangular patch modelling is ap- plied to the

Effect of HMX on the combustion response function

NASA Technical Reports Server (NTRS)

Strand, L. D.; Cohen, N. S.

1980-01-01

Over a pressure range of 3.5-7 MPa and a frequency range of 500-2000 Hz and compared to propellants having equivalent energy and burn rate, HMX produces less pressure-coupled acoustic driving than AP and is equivalent to NC/TMETN. Formation of carbonaceous combustion products indicates that binder decomposition does not follow equilibrium thermochemistry, and that this is aggravated by fuel richness or the absence of AP.

Formal Requirements-Based Programming for Complex Systems

NASA Technical Reports Server (NTRS)

Rash, James L.; Hinchey, Michael G.; Rouff, Christopher A.; Gracanin, Denis

2005-01-01

Computer science as a field has not yet produced a general method to mechanically transform complex computer system requirements into a provably equivalent implementation. Such a method would be one major step towards dealing with complexity in computing, yet it remains the elusive holy grail of system development. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that such tools and methods leave unfilled is that the formal models cannot be proven to be equivalent to the system requirements as originated by the customer For the classes of complex systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations. While other techniques are available, this method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. We illustrate the application of the method to an example procedure from the Hubble Robotic Servicing Mission currently under study and preliminary formulation at NASA Goddard Space Flight Center.

Ensuring Resiliency of the Milk and Dairy Industry in California

DTIC Science & Technology

2011-12-01

cannot be zero. Also, the upper bound cannot exceed the capacity of raw milk that the milk producing cows can make in each county. Between the...the amount of milk producing cows in each county and multiplying by the daily average amount of raw milk produced. RawMilkProd = NumMilkProdCows...the total number of milk producing cows . 365 TotalMilkProdDailyAvgAmtMilkProdPerCow TotalMilkProdCows = × We get the number of milk producing cows

42 CFR 447.514 - Upper limits for multiple source drugs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... State agency plus an amount established by CMS that is equal to 250 percent of the AMP (as computed... will consider the following additional criteria: (1) The AMP of a terminated NDC will not be used to... section, the AMP of the lowest priced therapeutically and pharmaceutically equivalent drug that is not...

7 CFR 240.6 - Funds for States which have phased out facilities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... shall make cash payments to such State in an amount equivalent in value to the donated foods (or cash in....6 Section 240.6 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CASH IN LIEU OF DONATED FOODS § 240.6...

7 CFR 240.6 - Funds for States which have phased out facilities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall make cash payments to such State in an amount equivalent in value to the donated foods (or cash in....6 Section 240.6 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CASH IN LIEU OF DONATED FOODS § 240.6...

Mercury toxicity reduced by selenium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1973-01-01

A methylmercury compound added to a tuna-corn-soya ration fed to Japanese quail was less toxic than an equivalent amount of the compound added to the basal corn-soya ration. Selenium present in the tuna is apparently the factor that reduces mercury toxicity, since it was also reduced or prevented by addition of selenium to the diets.

Differential Distraction Effects in Short-Term and Long-Term Retention of Pictures and Words

ERIC Educational Resources Information Center

Pellegrino, James W.; And Others

1976-01-01

Comparisons between recall levels following simple acoustic or visual tasks and the simultaneous visual-plus-acoustic task are not based upon equivalent amounts of interference within each modality. This research attempts to test more precisely the relationship between visual and acoustic interference by using a sequential rather than a…

43 CFR 3400.0-5 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... investments that have been made on the basis of a long-term coal contract in power plants, railroads, coal... authority to perform the duty described in the section in which the term is used. (c) Bonus means that value...)(18) of this title. (n) Fair market value means that amount in cash, or on terms reasonably equivalent...

43 CFR 3400.0-5 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... investments that have been made on the basis of a long-term coal contract in power plants, railroads, coal... authority to perform the duty described in the section in which the term is used. (c) Bonus means that value...)(18) of this title. (n) Fair market value means that amount in cash, or on terms reasonably equivalent...

19 CFR 181.44 - Calculation of drawback.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) The total amount of duties paid on the exported good upon subsequent importation into Canada or Mexico... Mexico and Mexico assessed the equivalent of US$2.00 in duty. There is no entitlement to drawback on the... entitlement to drawback on the export to Mexico, consisting of the $1.00 duty attributable to Product Z...

Glass fiber addition strengthens low-density ablative compositions

NASA Technical Reports Server (NTRS)

Chandler, H. H.

1974-01-01

Approximately 15% of E-glass fibers was added to compositions under test and greatly improved char stability. Use of these fibers also reduced thermal strains which, in turn, minimized char shrinkage and associated cracks, subsurface voids, and disbonds. Increased strength allows honeycomb core reinforcement to be replaced by equivalent amount of glass fibers.

7 CFR 51.784 - Classification of defects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Florida Grapefruit Definitions § 51.784 Classification of.... Dryness or mushy condition Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or the... more than 1/2 inch (12.7 mm) at stem end, or the equivalent of this amount, by volume, when occurring...

The GED. NBER Working Paper No. 16064

ERIC Educational Resources Information Center

Heckman, James J.; Humphries, John Eric; Mader, Nicholas S.

2010-01-01

The General Educational Development (GED) credential is issued on the basis of an eight hour subject-based test. The test claims to establish equivalence between dropouts and traditional high school graduates, opening the door to college and positions in the labor market. In 2008 alone, almost 500,000 dropouts passed the test, amounting to 12% of…

Medroxy-Progesterone Acetate in the Treatment of Paraphilic Sexual Disorders.

ERIC Educational Resources Information Center

Fedoroff, J. Paul; And Others

1992-01-01

Followed 46 male patients with paraphilic sexual disorders for 5 or more years in Johns Hopkins Sexual Disorders Unit. All patients received equivalent amounts of group psychotherapy. Of these, 17 relapsed. Rate of relapse among subjects receiving treatment with medroxy-progestorone acetate was 15 percent whereas rate of relapse among subjects not…

21 CFR 573.140 - Ammoniated cottonseed meal.

Code of Federal Regulations, 2011 CFR

2011-04-01

... required by the act, the following: (1) The name of the additive. (2) The maximum percentage of equivalent crude protein from the nonprotein nitrogen. (3) Directions for use to provide not more than 20 percent... source of protein and/or as a source of nonprotein nitrogen in an amount not to exceed 20 percent of the...

21 CFR 573.140 - Ammoniated cottonseed meal.

Code of Federal Regulations, 2012 CFR

2012-04-01

... required by the act, the following: (1) The name of the additive. (2) The maximum percentage of equivalent crude protein from the nonprotein nitrogen. (3) Directions for use to provide not more than 20 percent... source of protein and/or as a source of nonprotein nitrogen in an amount not to exceed 20 percent of the...

21 CFR 573.140 - Ammoniated cottonseed meal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... required by the act, the following: (1) The name of the additive. (2) The maximum percentage of equivalent crude protein from the nonprotein nitrogen. (3) Directions for use to provide not more than 20 percent... source of protein and/or as a source of nonprotein nitrogen in an amount not to exceed 20 percent of the...

21 CFR 573.140 - Ammoniated cottonseed meal.

Code of Federal Regulations, 2013 CFR

2013-04-01

... required by the act, the following: (1) The name of the additive. (2) The maximum percentage of equivalent crude protein from the nonprotein nitrogen. (3) Directions for use to provide not more than 20 percent... source of protein and/or as a source of nonprotein nitrogen in an amount not to exceed 20 percent of the...

21 CFR 573.140 - Ammoniated cottonseed meal.

Code of Federal Regulations, 2014 CFR

2014-04-01

... required by the act, the following: (1) The name of the additive. (2) The maximum percentage of equivalent crude protein from the nonprotein nitrogen. (3) Directions for use to provide not more than 20 percent... source of protein and/or as a source of nonprotein nitrogen in an amount not to exceed 20 percent of the...

12 CFR 1070.22 - Fees for processing requests for CFPB records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CFPB shall charge the requester for the actual direct cost of the search, including computer search time, runs, and the operator's salary. The fee for computer output will be the actual direct cost. For... and the cost of operating the computer to process a request) equals the equivalent dollar amount of...

Work required for selective quantum measurement

NASA Astrophysics Data System (ADS)

Konishi, Eiji

2018-06-01

In quantum mechanics, we define the measuring system M in a selective measurement by two conditions. Firstly, when we define the measured system S as the system in which the non-selective measurement part acts, M is independent from the measured system S as a quantum system in the sense that any time-dependent process in the total system S  +  M is divisible into parts for S and M. Secondly, when we can separate S and M from each other without changing the unitary equivalence class of the state of S from that obtained by the partial trace of M, the eigenstate selection in the selective measurement cannot be realized. In order for such a system M to exist, we show that in one selective measurement of an observable of a quantum system S 0 of particles in S, there exists a negative entropy transfer from M to S that can be directly transformed into an amount of Helmholtz free energy of where T is the thermodynamic temperature of the system S. Equivalently, an extra amount of work, , is required to be done by the system M.

40 CFR 430.117 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... using these biocides: Subpart K [PSNS for non-integrated mills where fine paper is produced from... equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations. Subpart K [PSNS for non-integrated mills where fine paper is produced from purchased...

40 CFR 430.117 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... using these biocides: Subpart K [PSNS for non-integrated mills where fine paper is produced from... equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations. Subpart K [PSNS for non-integrated mills where fine paper is produced from purchased...

40 CFR 430.117 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... using these biocides: Subpart K [PSNS for non-integrated mills where fine paper is produced from... equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations. Subpart K [PSNS for non-integrated mills where fine paper is produced from purchased...

40 CFR 430.117 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... using these biocides: Subpart K [PSNS for non-integrated mills where fine paper is produced from... equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations. Subpart K [PSNS for non-integrated mills where fine paper is produced from purchased...

40 CFR 430.116 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2011 CFR

2011-07-01

... [PSES for non-integrated mills where fine paper is produced from purchased pulp—wood fiber furnish....00064 y = wastewater discharged in kgal per ton of product. a The following equivalent mass limitations.... Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—cotton fiber...

40 CFR 430.116 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2010 CFR

2010-07-01

... [PSES for non-integrated mills where fine paper is produced from purchased pulp—wood fiber furnish....00064 y = wastewater discharged in kgal per ton of product. a The following equivalent mass limitations.... Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—cotton fiber...

Implementation of an Analytical Model for Leakage Neutron Equivalent Dose in a Proton Radiotherapy Planning System

PubMed Central

Eley, John; Newhauser, Wayne; Homann, Kenneth; Howell, Rebecca; Schneider, Christopher; Durante, Marco; Bert, Christoph

2015-01-01

Equivalent dose from neutrons produced during proton radiotherapy increases the predicted risk of radiogenic late effects. However, out-of-field neutron dose is not taken into account by commercial proton radiotherapy treatment planning systems. The purpose of this study was to demonstrate the feasibility of implementing an analytical model to calculate leakage neutron equivalent dose in a treatment planning system. Passive scattering proton treatment plans were created for a water phantom and for a patient. For both the phantom and patient, the neutron equivalent doses were small but non-negligible and extended far beyond the therapeutic field. The time required for neutron equivalent dose calculation was 1.6 times longer than that required for proton dose calculation, with a total calculation time of less than 1 h on one processor for both treatment plans. Our results demonstrate that it is feasible to predict neutron equivalent dose distributions using an analytical dose algorithm for individual patients with irregular surfaces and internal tissue heterogeneities. Eventually, personalized estimates of neutron equivalent dose to organs far from the treatment field may guide clinicians to create treatment plans that reduce the risk of late effects. PMID:25768061

Implementation of an analytical model for leakage neutron equivalent dose in a proton radiotherapy planning system.

PubMed

Eley, John; Newhauser, Wayne; Homann, Kenneth; Howell, Rebecca; Schneider, Christopher; Durante, Marco; Bert, Christoph

2015-03-11

Equivalent dose from neutrons produced during proton radiotherapy increases the predicted risk of radiogenic late effects. However, out-of-field neutron dose is not taken into account by commercial proton radiotherapy treatment planning systems. The purpose of this study was to demonstrate the feasibility of implementing an analytical model to calculate leakage neutron equivalent dose in a treatment planning system. Passive scattering proton treatment plans were created for a water phantom and for a patient. For both the phantom and patient, the neutron equivalent doses were small but non-negligible and extended far beyond the therapeutic field. The time required for neutron equivalent dose calculation was 1.6 times longer than that required for proton dose calculation, with a total calculation time of less than 1 h on one processor for both treatment plans. Our results demonstrate that it is feasible to predict neutron equivalent dose distributions using an analytical dose algorithm for individual patients with irregular surfaces and internal tissue heterogeneities. Eventually, personalized estimates of neutron equivalent dose to organs far from the treatment field may guide clinicians to create treatment plans that reduce the risk of late effects.

Understanding Montane Snow Water Equivalent Response to Climate Change and Variability

NASA Astrophysics Data System (ADS)

Huning, L. S.; AghaKouchak, A.

2017-12-01

Large populations worldwide rely on the seasonal snowpack for the majority of their water resources. Warming temperatures and other hydrometeorological changes impact the timing, distribution, and amount of montane snow water equivalent (SWE). Therefore, developing an improved understanding of the historical response to changing atmospheric drivers across snow-dominated mountainous regions has significant societal value related to water resources management and environmental hazards (i.e. flooding and droughts) for a future warming climate. Utilizing multi-decadal snow data sets and a probabilistic risk model over mountain ranges such as the Sierra Nevada (USA), the response of snowpack characteristics (e.g. SWE/snowfall, peak SWE, day of peak SWE, melt rate, etc.) to unit changes in hydrometeorological quantities (e.g. air temperature, humidity, winds, etc.) is quantified. The likelihood that the amount of SWE will exceed specified amounts (e.g. long-term peak SWE value) is presented for a range of climatic conditions. This study compares hydrologic response of montane SWE across windward and leeward basins, elevational bands, and regions of differing physiographic characteristics to understand how projected global warming such as a unit increase in air temperature or changes in other hydrometeorological quantities impact SWE at different spatial scales (i.e. basin-wide and range-wide). It provides insight that can be used to understand vulnerabilities of the seasonal snowpack to changes in climatic and atmospheric conditions.

Oxidase uncoupling in heme monooxygenases: Human cytochrome P450 CYP3A4 in Nanodiscs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grinkova, Yelena V.; Denisov, Ilia G.; McLean, Mark A.

Highlights: ► Substantial reducing equivalents are lost in human P450 CYP3A4 via an oxidase channel. ► Substrate binding has a pronounced effect on uncoupling in cytochrome P450. ► Anionic phospholipids improve the overall coupling in CYP3A4 Nanodiscs. -- Abstract: The normal reaction mechanism of cytochrome P450 operates by utilizing two reducing equivalents to reduce atmospheric dioxygen, producing one molecule of water and an oxygenated product in an overall stoichiometry of 2 electrons:1 dioxygen:1 product. However, three alternate unproductive pathways exist where the intermediate iron–oxygen states in the catalytic cycle can yield reduced oxygen products without substrate metabolism. The first involvesmore » release of superoxide from the oxygenated intermediate while the second occurs after input of the second reducing equivalent. Superoxide rapidly dismutates and hence both processes produce hydrogen peroxide that can be cytotoxic to the organism. In both cases, the formation of hydrogen peroxide involves the same overall stoichiometry as oxygenases catalysis. The key step in the catalytic cycle of cytochrome P450 involves scission of the oxygen–oxygen bond of atmospheric dioxygen to produce a higher valent iron-oxo state termed “Compound I”. This intermediate initiates a radical reaction in the oxygenase pathway but also can uptake two additional reducing equivalents from reduced pyridine nucleotide (NADPH) and the flavoprotein reductase to produce a second molecule of water. This non-productive decay of Compound I thus yields an overall oxygen to NADPH ratio of 1:2 and does not produce hydrocarbon oxidation. This water uncoupling reaction provides one of a limited means to study the reactivity of the critical Compound I intermediate in P450 catalysis. We measured simultaneously the rates of NADPH and oxygen consumption as a function of substrate concentration during the steady-state hydroxylation of testosterone catalyzed by human P450 CYP3A4 reconstituted in Nanodiscs. We discovered that the “oxidase” uncoupling pathway is also operating in the substrate free form of the enzyme with rate of this pathway substantially increasing with the first substrate binding event. Surprisingly, a large fraction of the reducing equivalents used by the P450 system is wasted in this oxidase pathway. In addition, the overall coupling with testosterone and bromocryptine as substrates is significantly higher in the presence of anionic lipids, which is attributed to the changes in the redox potential of CYP3A4 and reductase.« less

Protective Immunity Against a Lethal Respiratory Yersinia pestis Challenge Induced by V Antigen or the F1 Capsular Antigen Incorporated into Adenovirus Capsid

PubMed Central

Boyer, Julie L.; Sofer-Podesta, Carolina; Ang, John; Hackett, Neil R.; Chiuchiolo, Maria J.; Senina, Svetlana; Perlin, David

2010-01-01

Abstract The aerosol form of the bacterium Yersinia pestis causes pneumonic plague, a rapidly fatal disease that is a biothreat if deliberately released. At present, no plague vaccines are available for use in the United States, but subunit vaccines based on the Y. pestis V antigen and F1 capsular protein show promise when administered with adjuvants. In the context that adenovirus (Ad) gene transfer vectors have a strong adjuvant potential related to the ability to directly infect dendritic cells, we hypothesized that modification of the Ad5 capsid to display either the Y. pestis V antigen or the F1 capsular antigen on the virion surface would elicit high V antigen- or F1-specific antibody titers, permit boosting with the same Ad serotype, and provide better protection against a lethal Y. pestis challenge than immunization with equivalent amounts of V or F1 recombinant protein plus conventional adjuvant. We constructed AdYFP-pIX/V and AdLacZ-pIX/F1, E1–, E3– serotype 5 Ad gene transfer vectors containing a fusion of the sequence for either the Y. pestis V antigen or the F1 capsular antigen to the carboxy-terminal sequence of pIX, a capsid protein that can accommodate the entire V antigen (37 kDa) or F1 protein (15 kDa) without disturbing Ad function. Immunization with AdYFP-pIX/V followed by a single repeat administration of the same vector at the same dose resulted in significantly better protection of immunized animals compared with immunization with a molar equivalent amount of purified recombinant V antigen plus Alhydrogel adjuvant. Similarly, immunization with AdLacZ-pIX/F1 in a prime–boost regimen resulted in significantly enhanced protection of immunized animals compared with immunization with a molar-equivalent amount of purified recombinant F1 protein plus adjuvant. These observations demonstrate that Ad vaccine vectors containing pathogen-specific antigens fused to the pIX capsid protein have strong adjuvant properties and stimulate more robust protective immune responses than equivalent recombinant protein-based subunit vaccines administered with conventional adjuvant, suggesting that F1-and/or V-modified capsid Ad-based recombinant vaccines should be considered for development as anti-plague vaccines. PMID:20180652

Generic patches containing fentanyl: In vitro equivalence and abuse deterrent evaluation according to EMA and FDA guidelines.

PubMed

Padula, Cristina; Pescina, Silvia; Nicoli, Sara; Santi, Patrizia

2018-02-15

The aim of this work was to characterize in vitro and ex vivo the performances of Durogesic and of two bioequivalent generic products, by evaluating: (a) fentanyl release; (b) fentanyl permeation across porcine skin and (c) fentanyl ease of extraction. Additional characteristics studied are the effect of temperature and skin integrity, applied individually or combined, to check a possible synergism. The two generic patches resulted equivalent to the originator according to the new Guideline. Nevertheless, the same data reported in a different way, i.e. considering the total amount of drug permeated from the whole patch over the application time, highlight differences among the patches. The additional tests performed showed that skin integrity does not represent a barrier for fentanyl permeation across the skin, regardless of the type and complexity of the patch. The effect of temperature resulted critical for two out of three patches, probably due to the different composition and to the different structure. The combination of skin damage and elevated temperature did not produce a synergistic effect. Fentanyl extraction was different for the different products and variable according to the conditions used. The results reported in the present work underline the influence of patch composition and complexity on fentanyl extraction, release and skin permeation, in particular in conditions that can be critical, such as elevated temperature. In particular, the effect of critical variables, such as skin integrity and temperature, should be addressed to in the development of a new or new generic patch and new discriminant tests should be developed. Copyright © 2017 Elsevier B.V. All rights reserved.

Dilution and permeation standards for the generation of NO, NO2 and SO2 calibration gas mixtures

NASA Astrophysics Data System (ADS)

Haerri, H.-P.; Macé, T.; Waldén, J.; Pascale, C.; Niederhauser, B.; Wirtz, K.; Stovcik, V.; Sutour, C.; Couette, J.; Waldén, T.

2017-03-01

The evaluation results of the metrological performance of a dilution and a permeation standard for generating SI-traceable calibration gas mixtures of NO, SO2 and NO2 for ambient air measurements are presented. The composition of the in situ produced reference gas mixtures is calculated from the instantaneous values of the input quantities of the generating standards. In a measurement comparison, the calibration and measurement capabilities of five laboratories were evaluated for the three analytes at limiting amount of substance fractions in ambient air between 20 and 150 nmol mol-1. For the upper generated reference values the target relative uncertainties of  ⩽2% (for NO and SO2) and  ⩽3% (for NO2) for evaluating the laboratory results were fulfilled in 12 out of 13 cases. For the analytical results seven out of nine laboratories met the criteria for the upper values for NO and NO2, for SO2 it was one out of four. From the negative degrees of equivalence of all NO2 comparison results it was supposed that the permeation rate of NO2 through the FEP polymer membrane of the permeator was different in air and N2. Subsequent precision permeation measurements with various carrier gases revealed that the permeation rate of NO2 was  ≈0.8% lower in synthetic air compared to N2. With the corrected NO2 reference values for air the degrees of equivalence of the laboratory results were improved and closer to be symmetrically distributed.

Total phenolics content, anthocyanins, and dietary fiber content of apple pomace powders produced by vacuum-belt drying.

PubMed

Yan, Huitong; Kerr, William L

2013-04-01

Apple pomace is a waste material from apple juice processing, and contains significant amounts of dietary fiber and phytochemicals. Many of these compounds may be degraded post-pressing and during drying operations. Continuous vacuum-belt drying (VBD) was studied as a means of drying and maintaining quality of apple pomace. The color and chemical properties of samples dried by vacuum-belt drying at different temperatures were evaluated including total phenolics content (TPC), monomeric anthocyanins (TMA) and dietary fiber content (TDF). VBD powders were pale golden yellow, and those dried at 80°C did not differ in L*, a* and b* values from freeze-dried powders. VBD pomace had 44.9 to 51.9 g gallic acid equivalents kg(-1) TPC, with greatest retention for pomace dried at 80 and 95°C. TPC for pomace dried at 80 or 95°C was not significantly different from that for freeze-dried pomace. TMA levels (74.0 mg C3G kg(-1), where C3G is cyanidine 3-O-glucoside equivalents) were highest in pomace vacuum dried at 80°C. TDF ranged from 442 to 495 g kg(-1) in vacuum-dried pomace and was not significantly different from TDF of freeze-dried poamce (480 g kg(-1)). In all cases, TPC, TMA and TDF were higher in VBD pomace than in freeze-dried whole apple, while VBD pomace prepared at 80 or 95°C had fiber and phytochemical levels similar to freeze-dried powders. © 2012 Society of Chemical Industry.

In vitro 3D full thickness skin equivalent tissue model using silk and collagen biomaterials

PubMed Central

Bellas, Evangelia; Seiberg, Miri; Garlick, Jonathan; Kaplan, David L.

2013-01-01

Current approaches to develop skin equivalents often only include the epidermal and dermal components. Yet, full thickness skin includes the hypodermis, a layer below the dermis of adipose tissue containing vasculature, nerves and fibroblasts, necessary to support the epidermis and dermis. In the present study, we developed a full thickness skin equivalent including an epidermis, dermis and hypodermis that could serve as an in vitro model for studying skin development, disease or as a platform for consumer product testing as a means to avoid animal testing. The full thickness skin equivalent was easy to handle and was maintained in culture for greater than 14 days while expressing physiologically relevant morphologies of both the epidermis and dermis, as seen by keratin 10, collagen I and collagen IV expression. The skin equivalent produced glycerol and leptin, markers of adipose tissue metabolism. This work serves as a foundation for our understanding of some of the necessary factors needed to develop a stable, functional model of full-thickness skin. PMID:23161763

Nocturnal Accumulation of Malic Acid Occurs in Mesophyll Tissue without Proton Transport to Epidermal Tissue in the Inducible Crassulacean Acid Metabolism Plant Mesembryanthemum crystallinum1

PubMed Central

Winter, Klaus; Edwards, Gerald E.; Holtum, Joseph A. M.

1981-01-01

The inducible Crassulacean acid metabolism plant, Mesembryanthemum crystallinum, accumulates malic acid, i.e. equivalent amounts of malate anions and protons in the mesophyll cells at night. Levels of malate and titratable acidity are low in the epidermal tissue and do not change significantly during the day/night cycle. This result is in contrast to a recent report (Bloom 1979 Plant Physiol 64: 919-923) that the synthesis of malic acid during dark CO2 fixation is associated with an equivalent exchange of inorganic cations from epidermal tissue with protons in the mesophyll cells. PMID:16661916

The equivalence and difference between the English and Chinese versions of two major, cancer-specific, health-related quality-of-life questionnaires.

PubMed

Cheung, Yin-Bun; Thumboo, Julian; Goh, Cynthia; Khoo, Kei-Siong; Che, William; Wee, Joseph

2004-12-15

English and Chinese are two of the most widely used primary languages in the world. Patients in many cancer centers have a variety of ethnic backgrounds and primary languages. The comparability of version 4 of the English and Chinese versions of the Functional Assessment of Cancer Therapy-General (FACT-G) and version 3 of the European Organization for the Research and Treatment of Cancer Core Quality of Life Questionnaire (EORTC QLQ-C30) have not been established. In total, 1136 ethnic Chinese patients with cancer were recruited from the National Cancer Centre of Singapore. Patients chose to answer an English or Chinese questionnaire, according to their own preference. Multiple regression analysis was used to adjust for differences in demographic and health characteristics. Equivalence was confirmed if the 90% confidence intervals of the adjusted mean difference fell completely within an equivalence zone of +/- 0.25 standard deviations (SD). The English and Chinese versions of the Total, Emotional, and Functional Well Being Scales of the FACT-G and the Physical and Emotional Functioning Scales of the EORTC QLQ-C30 were equivalent. Scores for the other scales on the two questionnaires, at most, had a small differences that did not exceed 0.5 SD. Nevertheless, the Chinese translation of the question "I have a lack of energy" in the Physical Well Being Scale of the FACT-G produced results that differed from the results produced by the original English version. Data collected from English-speaking and Chinese-speaking respondents were capable of being pooled, and either version could be used for bilingual respondents. Nevertheless, the authors recommend modification of the Physical Well Being question that produced different results ("I have a lack of energy").

Method for the enzymatic production of hydrogen

DOEpatents

Woodward, Jonathan; Mattingly, Susan M.

1999-01-01

The present invention is an enzymatic method for producing hydrogen comprising the steps of: a) forming a reaction mixture within a reaction vessel comprising a substrate capable of undergoing oxidation within a catabolic reaction, such as glucose, galactose, xylose, mannose, sucrose, lactose, cellulose, xylan and starch. The reaction mixture further comprises an amount of glucose dehydrogenase in an amount sufficient to catalyze the oxidation of the substrate, an amount of hydrogenase sufficient to catalyze an electron-requiring reaction wherein a stoichiometric yield of hydrogen is produced, an amount of pH buffer in an amount sufficient to provide an environment that allows the hydrogenase and the glucose dehydrogenase to retain sufficient activity for the production of hydrogen to occur and also comprising an amount of nicotinamide adenine dinucleotide phosphate sufficient to transfer electrons from the catabolic reaction to the electron-requiring reaction; b) heating the reaction mixture at a temperature sufficient for glucose dehydrogenase and the hydrogenase to retain sufficient activity and sufficient for the production of hydrogen to occur, and heating for a period of time that continues until the hydrogen is no longer produced by the reaction mixture, wherein the catabolic reaction and the electron-requiring reactions have rates of reaction dependent upon the temperature; and c) detecting the hydrogen produced from the reaction mixture.

Method for the enzymatic production of hydrogen

DOEpatents

Woodward, J.; Mattingly, S.M.

1999-08-24

The present invention is an enzymatic method for producing hydrogen comprising the steps of: (a) forming a reaction mixture within a reaction vessel comprising a substrate capable of undergoing oxidation within a catabolic reaction, such as glucose, galactose, xylose, mannose, sucrose, lactose, cellulose, xylan and starch; the reaction mixture also comprising an amount of glucose dehydrogenase in an amount sufficient to catalyze the oxidation of the substrate, an amount of hydrogenase sufficient to catalyze an electron-requiring reaction wherein a stoichiometric yield of hydrogen is produced, an amount of pH buffer in an amount sufficient to provide an environment that allows the hydrogenase and the glucose dehydrogenase to retain sufficient activity for the production of hydrogen to occur and also comprising an amount of nicotinamide adenine dinucleotide phosphate sufficient to transfer electrons from the catabolic reaction to the electron-requiring reaction; (b) heating the reaction mixture at a temperature sufficient for glucose dehydrogenase and the hydrogenase to retain sufficient activity and sufficient for the production of hydrogen to occur, and heating for a period of time that continues until the hydrogen is no longer produced by the reaction mixture, wherein the catabolic reaction and the electron-requiring reactions have rates of reaction dependent upon the temperature; and (c) detecting the hydrogen produced from the reaction mixture. 8 figs.

Maximal aerobic and anaerobic power generation in large crocodiles versus mammals: implications for dinosaur gigantothermy.

PubMed

Seymour, Roger S

2013-01-01

Inertial homeothermy, the maintenance of a relatively constant body temperature that occurs simply because of large size, is often applied to large dinosaurs. Moreover, biophysical modelling and actual measurements show that large crocodiles can behaviourally achieve body temperatures above 30°C. Therefore it is possible that some dinosaurs could achieve high and stable body temperatures without the high energy cost of typical endotherms. However it is not known whether an ectothermic dinosaur could produce the equivalent amount of muscular power as an endothermic one. To address this question, this study analyses maximal power output from measured aerobic and anaerobic metabolism in burst exercising estuarine crocodiles, Crocodylusporosus, weighing up to 200 kg. These results are compared with similar data from endothermic mammals. A 1 kg crocodile at 30°C produces about 16 watts from aerobic and anaerobic energy sources during the first 10% of exhaustive activity, which is 57% of that expected for a similarly sized mammal. A 200 kg crocodile produces about 400 watts, or only 14% of that for a mammal. Phosphocreatine is a minor energy source, used only in the first seconds of exercise and of similar concentrations in reptiles and mammals. Ectothermic crocodiles lack not only the absolute power for exercise, but also the endurance, that are evident in endothermic mammals. Despite the ability to achieve high and fairly constant body temperatures, therefore, large, ectothermic, crocodile-like dinosaurs would have been competitively inferior to endothermic, mammal-like dinosaurs with high aerobic power. Endothermy in dinosaurs is likely to explain their dominance over mammals in terrestrial ecosystems throughout the Mesozoic.

The effect of elastic modulus on ablation catheter contact area.

PubMed

Camp, Jon J; Linte, Cristian A; Rettmann, Maryam E; Sun, Deyu; Packer, Douglas L; Robb, Richard A; Holmes, David R

2015-02-21

Cardiac ablation consists of navigating a catheter into the heart and delivering RF energy to electrically isolate tissue regions that generate or propagate arrhythmia. Besides the challenges of accurate and precise targeting of the arrhythmic sites within the beating heart, limited information is currently available to the cardiologist regarding intricate electrode-tissue contact, which directly impacts the quality of produced lesions. Recent advances in ablation catheter design provide intra-procedural estimates of tissue-catheter contact force, but the most direct indicator of lesion quality for any particular energy level and duration is the tissue-catheter contact area, and that is a function of not only force, but catheter pose and material elasticity as well. In this experiment, we have employed real-time ultrasound (US) imaging to determine the complete interaction between the ablation electrode and tissue to accurately estimate contact, which will help to better understand the effect of catheter pose and position relative to the tissue. By simultaneously recording tracked position, force reading and US image of the ablation catheter, the differing material properties of polyvinyl alcohol cryogel [1] phantoms are shown to produce varying amounts of tissue depression and contact area (implying varying lesion quality) for equivalent force readings. We have shown that the elastic modulus significantly affects the surface-contact area between the catheter and tissue at any level of contact force. Thus we provide evidence that a prescribed level of catheter force may not always provide sufficient contact area to produce an effective ablation lesion in the prescribed ablation time.

Benchmark Studies of the Effectiveness of Structural and Internal Materials as Radiation Shielding for the International Space Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, J.; Zeitlin, C.; Cucinotta, F.A.

2002-05-09

Accelerator-based measurements and model calculations have been used to study the heavy ion radiation transport properties of materials in use on the International Space Station (ISS). Samples of the ISS aluminum outer hull were augmented with various configurations of internal wall material and polyethylene. The materials were bombarded with high energy Fe ions characteristic of a significant part of the Galactic Cosmic Ray (GCR) heavy ion spectrum. Transmitted primary ions and charged fragments produced in nuclear collisions in the materials were measured near the beam axis, and a model was used to extrapolate from the data to lower beam energiesmore » and to a lighter ion. For the materials and ions studied, at incident particle energies from 1037 MeV/nucleon down to at least 600 MeV/nucleon, nuclear fragmentation reduces the average dose and dose equivalent per incident ion. At energies below 400 MeV/nucleon, the calculation predicts that as material is added, increased ionization energy loss produces increases in some dosimetric quantities. These limited results suggest that the addition of modest amounts of polyethylene or similar material to the interior of the ISS will reduce the dose to ISS crews from space radiation; however the radiation transport properties of ISS materials should be evaluated with a realistic space radiation field.« less

The utilization of patin fish head for instant stock paste

NASA Astrophysics Data System (ADS)

Hartanto, Gabriela Mawi; Rahmawati, Della; Puteri, Maria Gunawan

2017-01-01

Patin fish is a developing industries that produce 67% of waste which 33% is the head. High protein content in patin fish head (PFH) open an opportunity to produce something that has higher economic value and can be used as human consumption, which is stock. In this study, PFH hydrolysis with acid, enzyme and heat were observed for their yield of protein, in correlation to taste & national standard for stock. Enzyme hydrolysis is chosen as the selected method with the highest protein and soluble amino acid which is 18.78 ± 7.50 mg BSA equivalent / ml and 0.854 ± 4.35 mg Tyrosine eq / ml. The hydrolysate was made into stock by mixing with other ingredient by the help of Design Expert to create selected formula. The formula composition is fish hydrolysate 27.29%, salt 19.17%, caramel 18.52%, garlic 6%, pepper 3.104%, oil 18.52% and water 7.47%. This formula receive 7.13 value from hedonic scale 1-9, which means the formula like moderately based on overall acceptance. For 4 gram stock, 150 ml of water was chosen as the preferable dilution volume for the stock with ranking test. Total nitrogen of the instant stock paste with selected hydrolysis method and formula fulfill National Standard according to SNI No. 01-4218 with 0.077% nitrogen amount.

Biochar as a Substitute for Peat in Greenhouse Growing Media: Soil Water Characteristics and Carbon Leaching Dynamics

NASA Astrophysics Data System (ADS)

Johnson, M. S.; Hilbert, I.; Jollymore, A. J.

2012-12-01

Biochar (charcoal derived from waste biomass via pyrolysis) has the potential to be used as part of regional scale carbon sequestration strategies. By providing a stable form of carbon that is resistant to decay in soils, biochar can be utilized in a wide range of applications to improve the sustainability of land use management practices. Due to its high water holding capacity, surface area and charge density, it could provide a substitute for peat that is widely used in horticultural activities. Globally, peat production in 2010 amounted to 23.4 Mt, with more than a third of this used for horticulture. In Canada, essentially all peat produced is used for horticulture, with each ton of peat extracted also contributing about 0.7 t CO2e in combined greenhouse gas emissions related to production, transportation and use of peat. We evaluated biochar produced on farm from red alder as a peat substitute in terms of soil water characteristics and carbon leaching in greenhouse growing media (e.g. potting mix). Biochar mixing ratios of 10% (v/v) and greater provided water holding capacity equivalent to peat-based potting mixes. We also present results from a laboratory wetting experiment in which we characterized leachate for dissolved organic carbon (DOC) concentration and DOC characteristics using spectral methods (uV-Vis and fluorescence spectroscopy).

Benchmark studies of the effectiveness of structural and internal materials as radiation shielding for the international space station.

PubMed

Miller, J; Zeitlin, C; Cucinotta, F A; Heilbronn, L; Stephens, D; Wilson, J W

2003-03-01

Accelerator-based measurements and model calculations have been used to study the heavy-ion radiation transport properties of materials in use on the International Space Station (ISS). Samples of the ISS aluminum outer hull were augmented with various configurations of internal wall material and polyethylene. The materials were bombarded with high-energy iron ions characteristic of a significant part of the galactic cosmic-ray (GCR) heavy-ion spectrum. Transmitted primary ions and charged fragments produced in nuclear collisions in the materials were measured near the beam axis, and a model was used to extrapolate from the data to lower beam energies and to a lighter ion. For the materials and ions studied, at incident particle energies from 1037 MeV/nucleon down to at least 600 MeV/nucleon, nuclear fragmentation reduces the average dose and dose equivalent per incident ion. At energies below 400 MeV/nucleon, the calculation predicts that as material is added, increased ionization energy loss produces increases in some dosimetric quantities. These limited results suggest that the addition of modest amounts of polyethylene or similar material to the interior of the ISS will reduce the dose to ISS crews from space radiation; however, the radiation transport properties of ISS materials should be evaluated with a realistic space radiation field. Copyright 2003 by Radiation Research Society

Unsupported palladium alloy membranes and methods of making same

DOEpatents

Way, J. Douglas; Thoen, Paul; Gade, Sabina K.

2015-06-02

The invention provides support-free palladium membranes and methods of making these membranes. Single-gas testing of the unsupported foils produced hydrogen permeabilities equivalent to thicker membranes produced by cold-rolling. Defect-free films as thin as 7.2 microns can be fabricated, with ideal H.sub.2/N.sub.2 selectivities as high as 40,000. Homogeneous membrane compositions may also be produced using these methods.

40 CFR 430.116 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2014 CFR

2014-07-01

...: Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—wood fiber...)(15.2)/y 0.00064 y = wastewater discharged in kgal per ton of product. a The following equivalent mass.... Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—cotton fiber...

40 CFR 430.116 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2012 CFR

2012-07-01

...: Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—wood fiber...)(15.2)/y 0.00064 y = wastewater discharged in kgal per ton of product. a The following equivalent mass.... Subpart K [PSES for non-integrated mills where fine paper is produced from purchased pulp—cotton fiber...

Electrochemical process for the preparation of nitrogen fertilizers

DOEpatents

Aulich, Ted R [Grand Forks, ND; Olson, Edwin S [Grand Forks, ND; Jiang, Junhua [Grand Forks, ND

2012-04-10

The present invention provides methods and apparatus for the preparation of nitrogen fertilizers including ammonium nitrate, urea, urea-ammonium nitrate, and/or ammonia, at low temperature and pressure, preferably at ambient temperature and pressure, utilizing a source of carbon, a source of nitrogen, and/or a source of hydrogen or hydrogen equivalent. Implementing an electrolyte serving as ionic charge carrier, (1) ammonium nitrate is produced via the reduction of a nitrogen source at the cathode and the oxidation of a nitrogen source at the anode; (2) urea or its isomers are produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source; (3) ammonia is produced via the reduction of nitrogen source at the cathode and the oxidation of a hydrogen source or a hydrogen equivalent such as carbon monoxide or a mixture of carbon monoxide and hydrogen at the anode; and (4) urea-ammonium nitrate is produced via the simultaneous cathodic reduction of a carbon source and a nitrogen source, and anodic oxidation of a nitrogen source. The electrolyte can be aqueous, non-aqueous, or solid.

Biomethane potential of the POME generated in the palm oil industry in Ghana from 2002 to 2009.

PubMed

Arthur, Richard; Glover, Kwasi

2012-05-01

The palm oil industry experienced significant improvement in its production level from 2002 to 2009 from the established companies, medium scale mills (MSM), small scale and other private holdings (SS and OPH) groups. However, the same cannot be said for treatment of the palm oil mill effluent (POME) produced. The quantity of crude palm oil (CPO) produced in Ghana from 2002 to 2009 and IPCC guidelines for National Greenhouse Gas Inventories, specifically on industrial wastewater were used in this study. During this period about 10 million cubic metres of POME was produced translating into biomethane potential of 38.5 million m(3) with equivalent of 388.29 GW h of energy. A linear growth model developed to predict the equivalent carbon dioxide (CO(2)) emissions indicates that if the biomethane is not harnessed then by 2015 the untreated POME could produce 0.58 million tCO(2)-eq and is expected to increase to 0.70 million tCO(2)-eq by 2020. Copyright © 2012 Elsevier Ltd. All rights reserved.

17 CFR 240.13d-1 - Filing of Schedules 13D and 13G.

Code of Federal Regulations, 2011 CFR

2011-04-01

... regulatory scheme applicable to the equivalent U.S. institution; and (K) A group, provided that all the... influencing the control of the issuer, nor in connection with or as a participant in any transaction having... or control person, provided the aggregate amount held directly by the parent or control person, and...

17 CFR 240.13d-1 - Filing of Schedules 13D and 13G.

Code of Federal Regulations, 2010 CFR

2010-04-01

... regulatory scheme applicable to the equivalent U.S. institution; and (K) A group, provided that all the... control of the issuer, nor in connection with or as a participant in any transaction having such purpose... or control person, provided the aggregate amount held directly by the parent or control person, and...

78 FR 78890 - Comparability Determination for Japan: Certain Transaction-Level Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... method of the amount of customer margins or other guarantee money which a customer is required to deposit... deposited as customer margins or other guarantee money and matters equivalent thereto, and how customer margins or other guarantee money will be deposited by or returned to the customer. II-1-2.1(5)(i) and (ii...

26 CFR 36.3121(l)(1)-3 - Effect of agreement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Effect of agreement. 36.3121(l)(1)-3 Section 36.3121(l)(1)-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED... SUBSIDIARIES § 36.3121(l)(1)-3 Effect of agreement. (a) Liability for amounts equivalent to tax—(1) In general...

Estimating Sedimentation from an Erosion-Hazard Rating

Treesearch

R.M. Rice; S.A. Sherbin

1977-01-01

Data from two watersheds in northern California were used to develop an interpretation of the erosion hazard rating (EHR) of the Coast Forest District as amount of sedimentation. For the Caspar Creek Experimental Watershed (North Fork and South Fork), each EHR unit was estimated as equivalent to 0.0543 cubic yards per acre per year, on undisturbed forest. Experience...

Estimating sedimentation from an erosion-hazard rating

Treesearch

R. M. Rice; S. A. Sherbin

1977-01-01

Data from two watersheds in northern California were used to develop an interpretation of the erosion-hazard rating (EHR) of the Coast Forest District as amount of sedimentation. For the Caspar Creek Experimental Watershed (North Fork and South Fork), each EHR unit was estimated as equivalent to 0.0543 cubic yards per acre per year, on undisturbed forest. Experience...

75 FR 38092 - The Dow Chemical Company; Application for Blanket Authorization To Export Liquefied Natural Gas

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... DEPARTMENT OF ENERGY [FE Docket No. 10-57-LNG] The Dow Chemical Company; Application for Blanket... receipt of an application (Application), filed on May 26, 2010, by The Dow Chemical Company (Dow... the United States from foreign sources in an amount up to the equivalent of 390 billion cubic feet...

RELATIONSHIPS BETWEEN DIOXINS IN SOIL, AIR, ASH, AND EMISSIONS FROM A MUNICIPAL SOLID WASTE INCINERATOR EMITTING LARGE AMOUNTS OF DIOXINS

EPA Science Inventory

The Columbus Municipal Waste-to-Energy (Columbus WTE) facility in Columbus, Ohio, began operation in June, 1983 and ceased operation in December, 1994. During its operation, it was estimated to have released nearly 1000 grams of dioxin Toxic Equivalents (TEQs) per year. This co...

42 CFR 412.424 - Methodology for calculating the Federal per diem payment amount.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facilities located in a rural area as defined in § 412.402. (iii) Teaching adjustment. CMS adjusts the Federal per diem base rate by a factor to account for indirect teaching costs. (A) An inpatient psychiatric facility's teaching adjustment is based on the ratio of the number of full-time equivalent...

42 CFR 412.424 - Methodology for calculating the Federal per diem payment amount.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facilities located in a rural area as defined in § 412.402. (iii) Teaching adjustment. CMS adjusts the Federal per diem base rate by a factor to account for indirect teaching costs. (A) An inpatient psychiatric facility's teaching adjustment is based on the ratio of the number of full-time equivalent...

42 CFR 412.424 - Methodology for calculating the Federal per diem payment amount.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facilities located in a rural area as defined in § 412.402. (iii) Teaching adjustment. CMS adjusts the Federal per diem base rate by a factor to account for indirect teaching costs. (A) An inpatient psychiatric facility's teaching adjustment is based on the ratio of the number of full-time equivalent...

42 CFR 412.424 - Methodology for calculating the Federal per diem payment amount.

Code of Federal Regulations, 2010 CFR

2010-10-01

... facilities located in a rural area as defined in § 412.402. (iii) Teaching adjustment. CMS adjusts the Federal per diem base rate by a factor to account for indirect teaching costs. (A) An inpatient psychiatric facility's teaching adjustment is based on the ratio of the number of full-time equivalent...

42 CFR 412.424 - Methodology for calculating the Federal per diem payment amount.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facilities located in a rural area as defined in § 412.402. (iii) Teaching adjustment. CMS adjusts the Federal per diem base rate by a factor to account for indirect teaching costs. (A) An inpatient psychiatric facility's teaching adjustment is based on the ratio of the number of full-time equivalent...

7 CFR 51.1175 - Classification of defects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Florida Oranges and Tangelos Definitions § 51.1175... segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/2 inch (12.7 mm) at stem end, or...

7 CFR 51.1837 - Classification of defects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Definitions § 51.1837 Classification of defects. Table I Factor Damage Serious damage Very serious damage... segments more than 1/8 inch (3.2 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or...

7 CFR 51.1837 - Classification of defects.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Definitions § 51.1837 Classification of defects. Table I Factor Damage Serious damage Very serious damage... segments more than 1/8 inch (3.2 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/4 inch (6.4 mm) at stem end, or...

7 CFR 51.1175 - Classification of defects.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Florida Oranges and Tangelos Definitions § 51.1175... segments more than 1/4 inch (6.4 mm) at stem end, or the equivalent of this amount, by volume, when occurring in other portions of the fruit Affecting all segments more than 1/2 inch (12.7 mm) at stem end, or...

Crosslanguage Lexical Activation: A Test of the Revised Hierarchical and Morphological Decomposition Models in Arabic-English Bilinguals

ERIC Educational Resources Information Center

Qasem, Mousa; Foote, Rebecca

2010-01-01

This study tested the predictions of the revised hierarchical (RHM) and morphological decomposition (MDM) models with Arabic-English bilinguals. The RHM (Kroll & Stewart, 1994) predicts that the amount of activation of first language translation equivalents is negatively correlated with second language (L2) proficiency. The MDM (Frost, Forster, &…

Maltotriose fermentation by Saccharomyces cerevisiae.

PubMed

Zastrow, C R; Hollatz, C; de Araujo, P S; Stambuk, B U

2001-07-01

Maltotriose, the second most abundant sugar of brewer's wort, is not fermented but is respired by several industrial yeast strains. We have isolated a strain capable of growing on a medium containing maltotriose and the respiratory inhibitor, antimycin A. This strain produced equivalent amounts of ethanol from 20 g l(-1) glucose, maltose, or maltotriose. We performed a detailed analysis of the rates of active transport and intracellular hydrolysis of maltotriose by this strain, and by a strain that does not ferment this sugar. The kinetics of sugar hydrolysis by both strains was similar, and our results also indicated that yeast cells do not synthesize a maltotriose-specific alpha-glucosidase. However, when considering active sugar transport, a different pattern was observed. The maltotriose-fermenting strain showed the same rate of active maltose or maltotriose transport, while the strain that could not ferment maltotriose showed a lower rate of maltotriose transport when compared with the rates of active maltose transport. Thus, our results revealed that transport across the plasma membrane, and not intracellular hydrolysis, is the rate-limiting step for the fermentation of maltotriose by these Saccharomyces cerevisiae cells.

Application of lead-acrylic compensating filters in chiropractic full spine radiography: a technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buehler, M.T.; Hrejsa, A.F.

X-raying the entire spinal column in the standing position in a single exposure (mainly the AP projection) is an often-used chiropractic radiography procedure which has also found some application in medical scoliosis screening program. Aside from any controversy of clinical objectives or medical necessity, the primary agreed-upon requisite for such procedure is twofold; achieving the best possible film image quality with the least amount of radiation exposure to the patient. A popular method of accomplishing this objective is by the use of collimator-attached devices designed to selectively filter the primary x-ray beam in accordance with regional variations of body thicknessmore » and/or density. This study was conducted to evaluate the use of a new lead-acrylic filter system under specialized chiropractic conditions. In comparison to other available systems, it was concluded that this new system; a) is generally equivalent in its radiation dose reduction capabilities; b) is capable of producing full spine radiographs with good to above average image quality; and c) is appreciably easier to use.« less

A technique for correcting ERTS data for solar and atmospheric effects. [Michigan test site

NASA Technical Reports Server (NTRS)

Rogers, R. H. (Principal Investigator); Peacock, K.; Shah, N. J.

1974-01-01

The author has identified the following significant results. Based on processing ERTS CCTs and ground truth measurements collected on Michigan test site for January through June 1973 the following results are reported: (1) atmospheric transmittance varies from: 70 to 85% in band 4, 77 to 90% in band 5, 80 to 94% in band 6, and 84 to 97% in band 7 for one air mass; (2) a simple technique was established to determine atmospheric scattering seen by ERTS-1 from ground-based measurements of sky radiance. For March this scattering was found to be equivalent to that produced by a target having a reflectance of 11% in band 4, 5% in band 5, 3% in band 6, and 1% in band 7; (3) computer ability to classify targets under various atmospheric conditions was determined. Classification accuracy on some targets (i.e. bare soil, tended grass, etc.) hold up even under the most severe atmospheres encountered, while performance on other targets (trees, urban, rangeland, etc.) degrades rapidly when atmospheric conditions change by the smallest amount.

Brain tumor segmentation in MR slices using improved GrowCut algorithm

NASA Astrophysics Data System (ADS)

Ji, Chunhong; Yu, Jinhua; Wang, Yuanyuan; Chen, Liang; Shi, Zhifeng; Mao, Ying

2015-12-01

The detection of brain tumor from MR images is very significant for medical diagnosis and treatment. However, the existing methods are mostly based on manual or semiautomatic segmentation which are awkward when dealing with a large amount of MR slices. In this paper, a new fully automatic method for the segmentation of brain tumors in MR slices is presented. Based on the hypothesis of the symmetric brain structure, the method improves the interactive GrowCut algorithm by further using the bounding box algorithm in the pre-processing step. More importantly, local reflectional symmetry is used to make up the deficiency of the bounding box method. After segmentation, 3D tumor image is reconstructed. We evaluate the accuracy of the proposed method on MR slices with synthetic tumors and actual clinical MR images. Result of the proposed method is compared with the actual position of simulated 3D tumor qualitatively and quantitatively. In addition, our automatic method produces equivalent performance as manual segmentation and the interactive GrowCut with manual interference while providing fully automatic segmentation.

Dairy Biomass-Wyoming Coal Blends Fixed Gasification Using Air-Steam for Partial Oxidation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordillo, Gerardo; Annamalai, Kalyan

2012-01-01

Concenmore » trated animal feeding operations such as dairies produce a large amount of manure, termed as dairy biomass (DB), which could serve as renewable feedstock for thermal gasification. DB is a low-quality fuel compared to fossil fuels, and hence the product gases have lower heat content; however, the quality of gases can be improved by blending with coals. This paper deals with air-steam fixed-bed counterflow gasification of dairy biomass-Wyoming coal blend (DBWC). The effects of equivalence ratio ( 1.6 < Φ < 6.4 ) and steam-to-fuel ratio ( 0.4 < S : F < 0.8 ) on peak temperatures, gas composition, gross heating value of the products, and energy recovery are presented. According to experimental results, increasing Φ and ( S : F ) ratios decreases the peak temperature and increases the H 2 and CO 2 production, while CO production decreases. On the other hand, the concentrations of CH 4 and C 2 H 6 were lower compared to those of other gases and almost not affected by Φ.« less

Fuel-rich catalytic combustion: A fuel processor for high-speed propulsion

NASA Technical Reports Server (NTRS)

Brabbs, Theodore A.; Rollbuhler, R. James; Lezberg, Erwin A.

1990-01-01

Fuel-rich catalytic combustion of Jet-A fuel was studied over the equivalence ratio range 4.7 to 7.8, which yielded combustion temperatures of 1250 to 1060 K. The process was soot-free and the gaseous products were similar to those obtained in the iso-octane study. A carbon atom balance across the catalyst bed calculated for the gaseous products accounted for about 70 to 90 percent of the fuel carbon; the balance was condensed as a liquid in the cold trap. It was shown that 52 to 77 percent of the fuel carbon was C1, C2, and C3 molecules. The viability of using fuel-rich catalytic combustion as a technique for preheating a practical fuel to very high temperatures was demonstrated. Preliminary results from the scaled up version of the catalytic combustor produced a high-temperature fuel containing large amounts of hydrogen and carbon monoxide. The balance of the fuel was completely vaporized and in various stages of pyrolysis and oxidation. Visual observations indicate that there was no soot present.

Phase imaging microscopy for the diagnostics of plasma-cell interaction

NASA Astrophysics Data System (ADS)

Ohene, Yolanda; Marinov, Ilya; de Laulanié, Lucie; Dupuy, Corinne; Wattelier, Benoit; Starikovskaia, Svetlana

2015-06-01

Phase images of biological specimens were obtained by the method of Quadriwave Lateral Shearing Interferometry (QWLSI). The QWLSI technique produces, at high resolution, phase images of the cells having been exposed to a plasma treatment and enables the quantitative analysis of the changes in the surface area of the cells over time. Morphological changes in the HTori normal thyroid cells were demonstrated using this method. There was a comparison of the cell behaviour between control cells, cells treated by plasma of a nanosecond dielectric barrier discharge, including cells pre-treated by catalase, and cells treated with an equivalent amount of H2O2. The major changes in the cell membrane morphology were observed at only 5 min after the plasma treatment. The primary role of reactive oxygen species (ROS) in this degradation is suggested. Deformation and condensation of the cell nucleus were observed 2-3 h after the treatment and are supposedly related to apoptosis induction. The coupling of the phase QWLSI with immunofluorescence imaging would give a deeper insight into the mechanisms of plasma induced cell death.

Determination of the effective sample thickness via radiative capture

DOE PAGES

Hurst, A. M.; Summers, N. C.; Szentmiklosi, L.; ...

2015-09-14

Our procedure for determining the effective thickness of non-uniform irregular-shaped samples via radiative capture is described. In this technique, partial γ-ray production cross sections of a compound nucleus produced in a neutron-capture reaction are measured using Prompt Gamma Activation Analysis and compared to their corresponding standardized absolute values. For the low-energy transitions, the measured cross sections are lower than their standard values due to significant photoelectric absorption of the γ rays within the bulk-sample volume itself. Using standard theoretical techniques, the amount of γ-ray self absorption and neutron self shielding can then be calculated by iteratively varying the sample thicknessmore » until the observed cross sections converge with the known standards. The overall attenuation provides a measure of the effective sample thickness illuminated by the neutron beam. This procedure is illustrated through radiative neutron capture using powdered oxide samples comprising enriched 186W and 182W from which their tungsten-equivalent effective thicknesses are deduced to be 0.077(3) mm and 0.042(8) mm, respectively.« less

An analysis of the feasibility of carbon management policies as a mechanism to influence water conservation using optimization methods.

PubMed

Wright, Andrew; Hudson, Darren

2014-10-01

Studies of how carbon reduction policies would affect agricultural production have found that there is a connection between carbon emissions and irrigation. Using county level data we develop an optimization model that accounts for the gross carbon emitted during the production process to evaluate how carbon reducing policies applied to agriculture would affect the choices of what to plant and how much to irrigate by producers on the Texas High Plains. Carbon emissions were calculated using carbon equivalent (CE) calculations developed by researchers at the University of Arkansas. Carbon reduction was achieved in the model through a constraint, a tax, or a subsidy. Reducing carbon emissions by 15% resulted in a significant reduction in the amount of water applied to a crop; however, planted acreage changed very little due to a lack of feasible alternative crops. The results show that applying carbon restrictions to agriculture may have important implications for production choices in areas that depend on groundwater resources for agricultural production. Copyright © 2014 Elsevier Ltd. All rights reserved.

Carbon footprint hotspots of prefabricated sandwich panels for hostel construction in Perlis

NASA Astrophysics Data System (ADS)

Razali, Norashikin; Ayob, Afizah; Chandra, Muhammad Erwan Shah; Zaki, Mohd Faiz Mohammad; Ahmad, Abdul Ghapar

2017-10-01

Sustainable design and construction have gained increasing research interest, and reduction of carbon from building construction has become the main focus of environmental strategies in Malaysia. This study uses life cycle assessment and life cycle inventory analysis frameworks to estimate the amount of carbon footprint expressed in carbon dioxide equivalent tons (CO2e) produced by manufacturing prefabricated Industrialized Building System sandwich panels and its installation for a five-story hostel in Perlis, Malaysia. Results show that the carbon footprint hotspots were centered on boiler machine operation and cement with 4.52 and 369.04 tons CO2e, respectively. This finding is due to the extensive energy used for steam heating and high engine rating for the boiler. However, for cement, the carbon footprint hotspots are caused by the large quantity of cement applied in shotcrete mixture and its high extraction and production CO2 emission values. The overall onsite materials generated 96.36% of the total carbon footprint. These carbon footprint hotspot results constitute a necessary base for the Malaysian government in accomplishing an adequate dimensioning of carbon emissions in the building sector.

Process for reproducibly preparing titanium subhydride

DOEpatents

Carlson, Richard S.

1982-01-01

Titanium subhydride is produced in a reactor by heating a selected amount of finely divided titanium compound at a selected temperature for a selected period of time under dynamic vacuum conditions. Hydrogen is removed substantially uniformly from each powder grain and there is produced a subhydride of substantially uniform titanium-hydrogen composition. Selection of the amount, temperature and time produces a subhydride of selected titanium-hydrogen composition.

Constraining high-energy neutrino emission from choked jets in stripped-envelope supernovae

NASA Astrophysics Data System (ADS)

Senno, Nicholas; Murase, Kohta; Mészáros, Peter

2018-01-01

There are indications that γ-ray dark objects such as supernovae (SNe) with choked jets, and the cores of active galactic nuclei may contribute to the diffuse flux of astrophysical neutrinos measured by the IceCube observatory. In particular, stripped-envelope SNe have received much attention since they are capable of producing relativistic jets and could explain the diversity in observations of collapsar explosions (e.g., gamma-ray bursts (GRBs), low-luminosity GRBs, and Type Ibc SNe). We use an unbinned maximum likelihood method to search for spatial and temporal coincidences between Type Ibc core-collapse SNe, which may harbor a choked jet, and muon neutrinos from a sample of IceCube up-going track-like events measured from May 2011–May 2012. In this stacking analysis, we find no significant deviation from a background-only hypothesis using one year of data, and are able to place upper limits on the total amount of isotropic equivalent energy that choked jet core-collapse SNe deposit in cosmic rays Script Ecr and the fraction of core-collapse SNe which have a jet pointed towards Earth fjet. This analysis can be extended with yet to be made public IceCube data, and the increased amount of optically detected core-collapse SNe discovered by wide field-of-view surveys such as the Palomar Transient Factory and All-Sky Automated Survey for Supernovae. The choked jet SNe/high-energy cosmic neutrino connection can be more tightly constrained in the near future.

Evaluation of nutritional and antioxidant properties of the tropical fruits banana, litchi, mango, papaya, passion fruit and pineapple cultivated in Réunion French Island.

PubMed

Septembre-Malaterre, Axelle; Stanislas, Giovédie; Douraguia, Elisabeth; Gonthier, Marie-Paule

2016-12-01

Much attention is paid to the beneficial action of fruits against obesity-related oxidative stress. This study evaluated nutritional and antioxidant properties of banana, litchi, mango, papaya, passion fruit and pineapple from Réunion French Island. Results showed that total amounts of carbohydrates, vitamin C and carotenoids were 7.7-67.3g glucose equivalent, 4.7-84.9mg ascorbic acid equivalent and 26.6-3829.2μg β-carotene equivalent/100g fresh weight, respectively. Polyphenols were detected as the most abundant antioxidants (33.0-286.6mg gallic acid equivalent/100g fresh weight) with the highest content from passion fruit. UPLC-MS analysis led to identify epigallocatechin and quercetin derivatives from banana and litchi, ferulic, sinapic, syringic and gallic acids from pineapple and mango, and piceatannol from passion fruit. Polyphenol-rich extracts protected red blood cells and preadipose cells against oxidative stress. Altogether, these findings highlight nutritional benefits of French tropical fruits and their possible interest to improve antioxidant capacities of the body during obesity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimum rocket propulsion for energy-limited transfer

NASA Technical Reports Server (NTRS)

Zuppero, Anthony; Landis, Geoffrey A.

1991-01-01

In order to effect large-scale return of extraterrestrial resources to Earth orbit, it is desirable to optimize the propulsion system to maximize the mass of payload returned per unit energy expended. This optimization problem is different from the conventional rocket propulsion optimization. A rocket propulsion system consists of an energy source plus reaction mass. In a conventional chemical rocket, the energy source and the reaction mass are the same. For the transportation system required, however, the best system performance is achieved if the reaction mass used is from a locally available source. In general, the energy source and the reaction mass will be separate. One such rocket system is the nuclear thermal rocket, in which the energy source is a reactor and the reaction mass a fluid which is heated by the reactor and exhausted. Another energy-limited rocket system is the hydrogen/oxygen rocket where H2/O2 fuel is produced by electrolysis of water using a solar array or a nuclear reactor. The problem is to choose the optimum specific impulse (or equivalently exhaust velocity) to minimize the amount of energy required to produce a given mission delta-v in the payload. The somewhat surprising result is that the optimum specific impulse is not the maximum possible value, but is proportional to the mission delta-v. In general terms, at the beginning of the mission it is optimum to use a very low specific impulse and expend a lot of reaction mass, since this is the most energy efficient way to transfer momentum. However, as the mission progresses, it becomes important to minimize the amount of reaction mass expelled, since energy is wasted moving the reaction mass. Thus, the optimum specific impulse will increase with the mission delta-v. Optimum I(sub sp) is derived for maximum payload return per energy expended for both the case of fixed and variable I(sub sp) engines. Sample missions analyzed include return of water payloads from the moons of Mars and of Saturn.

Measurements of the neutron dose equivalent for various radiation qualities, treatment machines and delivery techniques in radiation therapy

NASA Astrophysics Data System (ADS)

Hälg, R. A.; Besserer, J.; Boschung, M.; Mayer, S.; Lomax, A. J.; Schneider, U.

2014-05-01

In radiation therapy, high energy photon and proton beams cause the production of secondary neutrons. This leads to an unwanted dose contribution, which can be considerable for tissues outside of the target volume regarding the long term health of cancer patients. Due to the high biological effectiveness of neutrons in regards to cancer induction, small neutron doses can be important. This study quantified the neutron doses for different radiation therapy modalities. Most of the reports in the literature used neutron dose measurements free in air or on the surface of phantoms to estimate the amount of neutron dose to the patient. In this study, dose measurements were performed in terms of neutron dose equivalent inside an anthropomorphic phantom. The neutron dose equivalent was determined using track etch detectors as a function of the distance to the isocenter, as well as for radiation sensitive organs. The dose distributions were compared with respect to treatment techniques (3D-conformal, volumetric modulated arc therapy and intensity-modulated radiation therapy for photons; spot scanning and passive scattering for protons), therapy machines (Varian, Elekta and Siemens linear accelerators) and radiation quality (photons and protons). The neutron dose equivalent varied between 0.002 and 3 mSv per treatment gray over all measurements. Only small differences were found when comparing treatment techniques, but substantial differences were observed between the linear accelerator models. The neutron dose equivalent for proton therapy was higher than for photons in general and in particular for double-scattered protons. The overall neutron dose equivalent measured in this study was an order of magnitude lower than the stray dose of a treatment using 6 MV photons, suggesting that the contribution of the secondary neutron dose equivalent to the integral dose of a radiotherapy patient is small.

Measurements of the neutron dose equivalent for various radiation qualities, treatment machines and delivery techniques in radiation therapy.

PubMed

Hälg, R A; Besserer, J; Boschung, M; Mayer, S; Lomax, A J; Schneider, U

2014-05-21

In radiation therapy, high energy photon and proton beams cause the production of secondary neutrons. This leads to an unwanted dose contribution, which can be considerable for tissues outside of the target volume regarding the long term health of cancer patients. Due to the high biological effectiveness of neutrons in regards to cancer induction, small neutron doses can be important. This study quantified the neutron doses for different radiation therapy modalities. Most of the reports in the literature used neutron dose measurements free in air or on the surface of phantoms to estimate the amount of neutron dose to the patient. In this study, dose measurements were performed in terms of neutron dose equivalent inside an anthropomorphic phantom. The neutron dose equivalent was determined using track etch detectors as a function of the distance to the isocenter, as well as for radiation sensitive organs. The dose distributions were compared with respect to treatment techniques (3D-conformal, volumetric modulated arc therapy and intensity-modulated radiation therapy for photons; spot scanning and passive scattering for protons), therapy machines (Varian, Elekta and Siemens linear accelerators) and radiation quality (photons and protons). The neutron dose equivalent varied between 0.002 and 3 mSv per treatment gray over all measurements. Only small differences were found when comparing treatment techniques, but substantial differences were observed between the linear accelerator models. The neutron dose equivalent for proton therapy was higher than for photons in general and in particular for double-scattered protons. The overall neutron dose equivalent measured in this study was an order of magnitude lower than the stray dose of a treatment using 6 MV photons, suggesting that the contribution of the secondary neutron dose equivalent to the integral dose of a radiotherapy patient is small.

Alternate propellant program, phase 1

NASA Technical Reports Server (NTRS)

Anderson, F. A.; West, W. R.

1979-01-01

Candidate propellant systems for the shuttle booster solid rocket motor (SRM), which would eliminate, or greatly reduce, the amount of HCl produced in the exhaust of the shuttle SRM were investigated. Ammonium nitrate was selected for consideration as the main oxidizer, with ammonium perchlorate and the nitramine, cyclo-tetramethylene-tetranitramine as secondary oxidizers. The amount of ammonium perchlorate used was limited to an amount which would produce an exhaust containing no more than 3% HCl.

Comparison of lead attenuation and lead hardening equivalence of materials used in respect of diagnostic X-ray shielding.

PubMed

Okunade, Akintunde Akangbe

2002-12-01

Present interest is in the shielding of diagnostic X-ray units. Numerical comparison has been made of the attenuation and hardening properties of lead and some particular alternative materials: steel, plate glass and gypsum wallboard. Results show, for particular choices of thickness, that lead and steel can be made to provide closely similar attenuation and spectral hardening, values of lead attenuation equivalent (LAE) and lead hardening equivalent (LHE) thicknesses being nearly the same. Significant differences in the attenuation and hardening properties of lead are found in comparison with plate glass and gypsum wallboard. LAE produces better matching of exposure for lead-plate glass and lead-gypsum wallboard than LHE.

Performance of Axial-Flow Supersonic Compressor on XJ-55-FF-1 Turbojet Engine. I - Preliminary Performance of Compressor. 1; Preliminary Performance of Compressor

NASA Technical Reports Server (NTRS)

Hartmann, Melvin J.; Graham, Robert C.

1949-01-01

An investigation was conducted to determine the performance characteristics of the axial-flow supersonic compressor of the XJ-55-FF-1 turbo Jet engine. The test unit consisted of a row of inlet guide vanes and a supersonic rotor; the stator vanes after the rotor were omitted. The maximum pressure ratio produced in the single stage was 2.28 at an equivalent tip speed or 1814 feet per second with an adiabatic efficiency of approximately 0.61, equivalent weight flow of 13.4 pounds per second. The maximum efficiency of 0.79 was obtained at an equivalent tip speed of 801 feet per second.

Method for extracting long-equivalent wavelength interferometric information

NASA Technical Reports Server (NTRS)

Hochberg, Eric B. (Inventor)

1991-01-01

A process for extracting long-equivalent wavelength interferometric information from a two-wavelength polychromatic or achromatic interferometer. The process comprises the steps of simultaneously recording a non-linear sum of two different frequency visible light interferograms on a high resolution film and then placing the developed film in an optical train for Fourier transformation, low pass spatial filtering and inverse transformation of the film image to produce low spatial frequency fringes corresponding to a long-equivalent wavelength interferogram. The recorded non-linear sum irradiance derived from the two-wavelength interferometer is obtained by controlling the exposure so that the average interferogram irradiance is set at either the noise level threshold or the saturation level threshold of the film.

On the Number of Non-equivalent Ancestral Configurations for Matching Gene Trees and Species Trees.

PubMed

Disanto, Filippo; Rosenberg, Noah A

2017-09-14

An ancestral configuration is one of the combinatorially distinct sets of gene lineages that, for a given gene tree, can reach a given node of a specified species tree. Ancestral configurations have appeared in recursive algebraic computations of the conditional probability that a gene tree topology is produced under the multispecies coalescent model for a given species tree. For matching gene trees and species trees, we study the number of ancestral configurations, considered up to an equivalence relation introduced by Wu (Evolution 66:763-775, 2012) to reduce the complexity of the recursive probability computation. We examine the largest number of non-equivalent ancestral configurations possible for a given tree size n. Whereas the smallest number of non-equivalent ancestral configurations increases polynomially with n, we show that the largest number increases with [Formula: see text], where k is a constant that satisfies [Formula: see text]. Under a uniform distribution on the set of binary labeled trees with a given size n, the mean number of non-equivalent ancestral configurations grows exponentially with n. The results refine an earlier analysis of the number of ancestral configurations considered without applying the equivalence relation, showing that use of the equivalence relation does not alter the exponential nature of the increase with tree size.

Scalability of the LEU-Modified Cintichem Process: 3-MeV Van de Graaff and 35-MeV Electron Linear Accelerator Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rotsch, David A.; Brossard, Tom; Roussin, Ethan

Molybdenum-99, the mother of Tc-99m, can be produced from fission of U-235 in nuclear reactors and purified from fission products by the Cintichem process, later modified for low-enriched uranium (LEU) targets. The key step in this process is the precipitation of Mo with α-benzoin oxime (ABO). The stability of this complex to radiation has been examined. Molybdenum-ABO was irradiated with 3 MeV electrons produced by a Van de Graaff generator and 35 MeV electrons produced by a 50 MeV/25 kW electron linear accelerator. Dose equivalents of 1.7–31.2 kCi of Mo-99 were administered to freshly prepared Mo-ABO. Irradiated samples of Mo-ABOmore » were processed according to the LEU Modified-Cintichem process. The Van de Graaff data indicated good radiation stability of the Mo-ABO complex up to ~15 kCi dose equivalents of Mo-99 and nearly complete destruction at doses >24 kCi Mo-99. The linear accelerator data indicate that even at 6.2 kCi of Mo-99 equivalence of dose, the sample lost ~20% of Mo-99. The 20% loss of Mo-99 at this low dose may be attributed to thermal decomposition of the product from the heat deposited in the sample during irradiation.« less

Developing a mesophilic co-culture for direct conversion of cellulose to butanol in consolidated bioprocess.

PubMed

Wang, Zhenyu; Cao, Guangli; Zheng, Ju; Fu, Defeng; Song, Jinzhu; Zhang, Junzheng; Zhao, Lei; Yang, Qian

2015-01-01

Consolidated bioprocessing (CBP) of butanol production from cellulosic biomass is a promising strategy for cost saving compared to other processes featuring dedicated cellulase production. CBP requires microbial strains capable of hydrolyzing biomass with enzymes produced on its own with high rate and high conversion and simultaneously produce a desired product at high yield. However, current reported butanol-producing candidates are unable to utilize cellulose as a sole carbon source and energy source. Consequently, developing a co-culture system using different microorganisms by taking advantage of their specific metabolic capacities to produce butanol directly from cellulose in consolidated bioprocess is of great interest. This study was mainly undertaken to find complementary organisms to the butanol producer that allow simultaneous saccharification and fermentation of cellulose to butanol in their co-culture under mesophilic condition. Accordingly, a highly efficient and stable consortium N3 on cellulose degradation was first developed by multiple subcultures. Subsequently, the functional microorganisms with 16S rRNA sequences identical to the denaturing gradient gel electrophoresis (DGGE) profile were isolated from consortium N3. The isolate Clostridium celevecrescens N3-2 exhibited higher cellulose-degrading capability was thus chosen as the partner strain for butanol production with Clostridium acetobutylicum ATCC824. Meanwhile, the established stable consortium N3 was also investigated to produce butanol by co-culturing with C. acetobutylicum ATCC824. Butanol was produced from cellulose when C. acetobutylicum ATCC824 was co-cultured with either consortium N3 or C. celevecrescens N3-2. Co-culturing C. acetobutylicum ATCC824 with the stable consortium N3 resulted in a relatively higher butanol concentration, 3.73 g/L, and higher production yield, 0.145 g/g of glucose equivalent. The newly isolated microbial consortium N3 and strain C. celevecrescens N3-2 displayed effective degradation of cellulose and produced considerable amounts of butanol when they were co-cultured with C. acetobutylicum ATCC824. This is the first report of application of co-culture to produce butanol directly from cellulose under mesophilic condition. Our results indicated that co-culture of mesophilic cellulolytic microbe and butanol-producing clostridia provides a technically feasible and more simplified way for producing butanol directly from cellulose.

Goal equivalent manifold analysis of task performance in non-specific LBP and healthy subjects during repetitive trunk movement: Effect of load, velocity, symmetry.

PubMed

Chehrehrazi, Mahshid; Sanjari, Mohammad Ali; Mokhtarinia, Hamid Reza; Jamshidi, Ali Ashraf; Maroufi, Nader; Parnianpour, Mohamad

2017-01-01

Motor abundance allows reliability of motor performance despite its variability. The nature of this variability provides important information on the flexibility of control strategies. This feature of control may be affected by low back pain (LPB) and trunk flexion/extension conditions. Goal equivalent manifold (GEM) analysis was used to quantify the ability to exploit motor abundance during repeated trunk flexion/extension in healthy individuals and people with chronic non-specific LBP (CNSLBP). Kinematic data were collected from 22 healthy volunteers and 22 CNSLBP patients during metronomically timed, repeated trunk flexion/extension in three conditions of symmetry, velocity, and loading; each at two levels. A goal function for the task was defined as maintaining a constant movement time at each cycle. Given the GEM, flexibility index and performance index were calculated respectively as amounts of goal-equivalent variability and the ratio of goal-equivalent to non-goal-equivalent variability. CNSLBP group was as similar as healthy individuals in both flexibility index (p=0.41) and performance index (p=0.24). Performance index was higher in asymmetric (p<0.001), high velocity (p<0.001), and loaded (p=0.006) conditions. Performance and flexibility in using motor abundance were influenced by repeated trunk flexion/extension conditions. However, these measures were not significantly affected by CNSLBP. Copyright © 2016 Elsevier B.V. All rights reserved.

Process and system for removing sulfur from sulfur-containing gaseous streams

DOEpatents

Basu, Arunabha; Meyer, Howard S.; Lynn, Scott; Leppin, Dennis; Wangerow, James R.

2012-08-14

A multi-stage UCSRP process and system for removal of sulfur from a gaseous stream in which the gaseous stream, which contains a first amount of H.sub.2S, is provided to a first stage UCSRP reactor vessel operating in an excess SO.sub.2 mode at a first amount of SO.sub.2, producing an effluent gas having a reduced amount of SO.sub.2, and in which the effluent gas is provided to a second stage UCSRP reactor vessel operating in an excess H.sub.2S mode, producing a product gas having an amount of H.sub.2S less than said first amount of H.sub.2S.

SEPs to finger joint input lack the N20-P20 response that is evoked by tactile inputs: contrast between cortical generators in areas 3b and 2 in humans.

PubMed

Desmedt, J E; Ozaki, I

1991-01-01

A method using a DC servo motor is described to produce brisk angular movements at finger interphalangeal joints in humans. Small passive flexions of 2 degrees elicited sizable somatosensory evoked potentials (SEPs) starting with a contralateral positive P34 parietal response thought to reflect activation of a radial equivalent dipole generator in area 2 which receives joint inputs. By contrast, electric stimulation of tactile (non-joint) inputs from the distal phalanx evoked the usual contralateral negative N20 reflecting a tangential equivalent dipole generator in area 3b. Finger joint inputs also evoked a precentral positivity equivalent to the P22 of motor area 4, and a large frontal negativity equivalent to N30. It is suggested that natural stimulation allows human SEP components to be differentiated in conjunction with distinct cortical somatotopic projections.

Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

2004-01-01

A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.

A Formal Approach to Requirements-Based Programming

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

2005-01-01

No significant general-purpose method is currently available to mechanically transform system requirements into a provably equivalent model. The widespread use of such a method represents a necessary step toward high-dependability system engineering for numerous application domains. Current tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The "gap" unfilled by such tools and methods is that the formal models cannot be proven to be equivalent to the requirements. We offer a method for mechanically transforming requirements into a provably equivalent formal model that can be used as the basis for code generation and other transformations. This method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. Finally, we describe further application areas we are investigating for use of the approach.

Towards an Automated Development Methodology for Dependable Systems with Application to Sensor Networks

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

2005-01-01

A general-purpose method to mechanically transform system requirements into a probably equivalent model has yet to appeal: Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a probably equivalent implementation are valuable but not su8cient. The "gap" unfilled by such tools and methods is that their. formal models cannot be proven to be equivalent to the system requirements as originated by the customel: For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a probably equivalent formal model that can be used as the basis for code generation and other transformations.

HYBRID SULFUR PROCESS REFERENCE DESIGN AND COST ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorensek, M.; Summers, W.; Boltrunis, C.

2009-05-12

This report documents a detailed study to determine the expected efficiency and product costs for producing hydrogen via water-splitting using energy from an advanced nuclear reactor. It was determined that the overall efficiency from nuclear heat to hydrogen is high, and the cost of hydrogen is competitive under a high energy cost scenario. It would require over 40% more nuclear energy to generate an equivalent amount of hydrogen using conventional water-cooled nuclear reactors combined with water electrolysis compared to the proposed plant design described herein. There is a great deal of interest worldwide in reducing dependence on fossil fuels, whilemore » also minimizing the impact of the energy sector on global climate change. One potential opportunity to contribute to this effort is to replace the use of fossil fuels for hydrogen production by the use of water-splitting powered by nuclear energy. Hydrogen production is required for fertilizer (e.g. ammonia) production, oil refining, synfuels production, and other important industrial applications. It is typically produced by reacting natural gas, naphtha or coal with steam, which consumes significant amounts of energy and produces carbon dioxide as a byproduct. In the future, hydrogen could also be used as a transportation fuel, replacing petroleum. New processes are being developed that would permit hydrogen to be produced from water using only heat or a combination of heat and electricity produced by advanced, high temperature nuclear reactors. The U.S. Department of Energy (DOE) is developing these processes under a program known as the Nuclear Hydrogen Initiative (NHI). The Republic of South Africa (RSA) also is interested in developing advanced high temperature nuclear reactors and related chemical processes that could produce hydrogen fuel via water-splitting. This report focuses on the analysis of a nuclear hydrogen production system that combines the Pebble Bed Modular Reactor (PBMR), under development by PBMR (Pty.) Ltd. in the RSA, with the Hybrid Sulfur (HyS) Process, under development by the Savannah River National Laboratory (SRNL) in the US as part of the NHI. This work was performed by SRNL, Westinghouse Electric Company, Shaw, PBMR (Pty) Ltd., and Technology Insights under a Technical Consulting Agreement (TCA). Westinghouse Electric, serving as the lead for the PBMR process heat application team, established a cost-shared TCA with SRNL to prepare an updated HyS thermochemical water-splitting process flowsheet, a nuclear hydrogen plant preconceptual design and a cost estimate, including the cost of hydrogen production. SRNL was funded by DOE under the NHI program, and the Westinghouse team was self-funded. The results of this work are presented in this Final Report. Appendices have been attached to provide a detailed source of information in order to document the work under the TCA contract.« less

Experimental study of the effects of flameholder geometry on emissions and performance of lean premixed combustors

NASA Technical Reports Server (NTRS)

Roffe, G.; Venkataramani, K. S.

1978-01-01

Emissions of NOx, CO, and unburned hydrocarbons (UHC) are reported for a lean premixed propane-air system at inlet conditions of 800K and 1MPa using twelve flameholder designs. The flameholders tested represent six design concepts with two values of blockage for each concept. Data were obtained at reference velocities of 35 m/s, 25 m/s and 20 m/s at combustor stations 10 cm and 30 cm downstream of the flameholders. Flameholder pressure drop was found to be a principal determinant of emissions performance. Designs producing larger pressure drops also produced less NOx, CO, and UHC emissions. The lean stability limit equivalence ratio was found to be approximately 0.35 for all designs. Flashback velocities (axial components in the flameholder passages) varied between 30 m/s and 40 m/s. A perforated plate flameholder was operated with a velocity as low as 23 m/s through the perforations at equivalence ratio 0.7 without producing flashback.

Treatment of Anomia Using Errorless Versus Errorful Learning: Are Frontal Executive Skills and Feedback Important?

ERIC Educational Resources Information Center

Fillingham, Joanne; Sage, Karen; Ralph, Matthew Lambon

2005-01-01

Background: Studies from the amnesia literature suggest that errorless learning can produce superior results to errorful learning. However, it was found in a previous investigation by the present authors that errorless and errorful therapy produced equivalent results for patients with aphasic word-finding difficulties. A study in the academic…

21 CFR 133.188 - Semisoft part-skim cheeses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... lactic-acid-producing bacteria or other harmless flavor-producing bacteria, present in such milk or added... the methods set forth in § 133.5 (a), (b), and (d). If the milk used is not pasteurized, the cheese so... phenol equivalent of more than 5 micrograms when tested by the method prescribed in § 133.5(c). (d...

21 CFR 133.188 - Semisoft part-skim cheeses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... lactic-acid-producing bacteria or other harmless flavor-producing bacteria, present in such milk or added... the methods set forth in § 133.5 (a), (b), and (d). If the milk used is not pasteurized, the cheese so... phenol equivalent of more than 5 micrograms when tested by the method prescribed in § 133.5(c). (d...

21 CFR 133.188 - Semisoft part-skim cheeses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... lactic-acid-producing bacteria or other harmless flavor-producing bacteria, present in such milk or added... the methods set forth in § 133.5 (a), (b), and (d). If the milk used is not pasteurized, the cheese so... phenol equivalent of more than 5 micrograms when tested by the method prescribed in § 133.5(c). (d...

Use of plasma creatine kinase pharmacokinetics to estimate the amount of excercise-induced muscle damage in Beagles.

PubMed

Chanoit, G P; Lefebvre, H P; Orcel, K; Laroute, V; Toutain, P L; Braun, J P

2001-09-01

To assess the effects of moderate exercise on plasma creatine kinase (CK) pharmacokinetics and to estimate exercise-induced muscle damage in dogs. 6 untrained adult Beagles. The study was divided into 3 phases. In phase 1, dogs ran for 1 hour at a speed of 9 km/h, and samples were used to determine the area under the plasma CK activity versus time curve (AUC) induced by exercise. In phases 2 and 3, pharmacokinetics of CK were calculated in dogs during exercise and at rest, respectively. Values for AUC and plasma clearance (CI) were used to estimate muscle damage. At rest, values for Cl, steady-state volume of distribution (Vdss), and mean retention time (MRT) were 0.32+/-0.02 ml/kg of body weight/min, 57+/-173 ml/kg, and 3.0+/-0.57 h, respectively. During exercise, Cl decreased significantly (0.26+/-0.03 ml/kg/min), MRT increased significantly, (4.4+/-0.97 h), and Vdss remained unchanged. Peak of plasma CK activity (151+/-58.8 U/L) was observed 3 hours after completion of exercise. Estimated equivalent amount of muscle corresponding to the quantity of CK released was 41+/-29.3 mg/kg. These results revealed that exercise had a minor effect on CK disposition and that the equivalent amount of muscle damaged by moderate exercise was negligible. This study illustrates the relevance for use of the minimally invasive and quantitative pharmacokinetic approach when estimating muscle damage.

Water Ecosystem Services in Northern Australia—How Much Are They Worth and Who Should Pay for Their Provision?

PubMed Central

Zander, Kerstin K.; Parkes, Rowena; Straton, Anna; Garnett, Stephen T.

2013-01-01

There is ongoing pressure to develop the largely unaltered Daly River catchment in northern Australia for agriculture. However, a choice experiment among people in the region and in Australia’s largest city, Sydney, shows that people are prepared to pay substantial amounts to maintain the quality of its ecosystem services. The total stated willingness-to-pay (WTP) for a Daly River conservation programme was about $300, of which people would be willing to pay over half ($161) if the programme retained waterholes for Aboriginal people in good condition. The WTP for high quality recreational fishing and biodiversity values was $120 and $91 respectively. Using the average cost of a recreational fishing license in Australia ($35) as a basis for grounding the stated preferences in empirical values, as well as the cost of park entry fees and the amount of support society provides to agriculture in Australia, the total amount that the 110,000 people in the region are likely to be willing to pay for the retention of the values in the Daly River catchment is about $6 million, while the 4.5 million people in Sydney would be willing to pay about $81 million. A significant finding in this research is that, while fishing, biodiversity and agricultural values all have equivalents in the market economy, the value for which people were willing to pay most, the cultural value, has no equivalent at all and is thus receives almost no investment. PMID:23717611

Two-port transmission line technique for dielectric property characterization of polymer electrolyte membranes.

PubMed

Lu, Zijie; Lanagan, Michael; Manias, Evangelos; Macdonald, Digby D

2009-10-15

Performance improvements of perfluorosulfonic acid membranes, such as Nafion and Flemion, underline a need for dielectric characterization of these materials toward a quantitative understanding of the dynamics of water molecules and protons within the membranes. In this Article, a two-port transmission line technique for measuring the complex permittivity spectra of polymeric electrolytes in the microwave region is described, and the algorithms for permittivity determination are presented. The technique is experimentally validated with liquid water and polytertrafluoroethylene film, whose dielectric properties are well-known. Further, the permittivity spectra of dry and hydrated Flemion SH150 membranes are measured and compared to those of Nafion 117. Two water relaxation modes are observed in the microwave region (0.045-26 GHz) at 25 degrees C. The higher-frequency process observed is identified as the cooperative relaxation of bulk-like water, whose amount was found to increase linearly with water content in the polymer. The lower-frequency process, characterized by longer relaxation times in the range of 20-70 ps, is attributed to water molecules that are loosely bound to sulfonate groups. The loosely bound water amount was found to increase with hydration level at low water content and levels off at higher water contents. Flemion SH150, which has an equivalent weight of 909 g/equiv, displays higher dielectric strengths for both of these water modes as compared to Nafion 117 (equivalent weight of 1100 g/equiv), which probably reflects the effect of equivalent weight on the polymers' hydrated structure, and in particular its effect on the extended ionic cluster domains.

Planning for Coupling Effects in Bitoric Mixed Astigmatism Ablative Treatments.

PubMed

Alpins, Noel; Ong, James K Y; Stamatelatos, George

2017-08-01

To demonstrate how to determine the historical coupling adjustments of bitoric mixed astigmatism ablative treatments and how to use these historical coupling adjustments to adjust future bitoric treatments. The individual coupling adjustments of the myopic and hyperopic cylindrical components of a bitoric treatment were derived empirically from a retrospective study where the theoretical combined treatment effect on spherical equivalent was compared to the actual change in refractive spherical equivalent. The coupling adjustments that provided the best fit in both mean and standard deviation were determined to be the historical coupling adjustments. Theoretical treatments that incorporated the historical coupling adjustments were then calculated. The actual distribution of postoperative spherical equivalent errors was compared to the theoretically adjusted distribution. The study group comprised 242 eyes and included 118 virgin right eyes and 124 virgin left eyes of 155 individuals. For the laser used, the myopic coupling adjustment was -0.02 and the hyperopic coupling adjustment was 0.30, as derived by global nonlinear optimization. This implies that almost no adjustment of the myopic component of the bitoric treatment is necessary, but that the hyperopic component of the bitoric treatment generates a large amount of unintended spherical shift. The theoretically adjusted treatments targeted zero mean spherical equivalent error, as intended, and the distribution of the theoretical spherical equivalent errors had the same spread as the distribution of actual postoperative spherical equivalent errors. Bitoric mixed astigmatism ablative treatments may display non-trivial coupling effects. Historical coupling adjustments should be taken into consideration when planning mixed astigmatism treatments to improve surgical outcomes. [J Refract Surg. 2017;33(8):545-551.]. Copyright 2017, SLACK Incorporated.

An injury equivalency system for establishing a common economic threshold for three species of rice planthoppers (Hemiptera: Delphacidae) in Taiwan.

PubMed

Huang, Shou-Horng; Chen, Ching-Huan; Chen, Chiou-Nan; Wu, Wen-Jer

2013-04-01

The economic threshold (ET) for multiple pest species that share the same injury type on host plants (feeding guild) has been proposed for decision-making in integrated management framework of many defoliating insect pests. However, only a few consider agricultural pests with sucking mouthparts. This study presents the first injury equivalency system for the feeding guild made up of three rice (Oryza sativa L.) planthopper (Hemiptera: Delphacidae) species--Nilaparvata lugens (Stål), Sogatella furcifera (Harváth), and Laodelphax striatellus (Fallén)--by using relative amount of honeydew excretion of each species. The intraspecific injury equivalent coefficient was determined; this coefficient provides an exchange rate for different developmental stages in a species. N. lugens was chosen as the standard species to obtain interspecific injury equivalents for other individuals in the guild, allowing estimates of total guild injury feasible. For extension purposes, the injury equivalency was simplified by pooling all nymphs and adults in the guild to mitigate the potential confusion resulting from uncertainty of instars or wing form. A matrix of ETs established on previous studies and incorporating changes of management cost and rice price was used and served as a control decision guide for the guild samples. The validity of the proposed injury equivalency system was tested using several field data sets, and the results are generally promising and meaningfully elevate the accuracy of estimating combined injury and damage to rice, suggesting that the proposed system is a better integrated pest management decision-making system compared with conventional practices.

An Alkalophilic Bacillus sp. Produces 2-Phenylethylamine

PubMed Central

Hamasaki, Nobuko; Shirai, Shinji; Niitsu, Masaru; Kakinuma, Katsumi; Oshima, Tairo

1993-01-01

A large amount of 2-phenylethylamine was produced in cells of alkalophilic Bacillus sp. strain YN-2000. This amine is secreted in the medium during the cell growth. The amounts of 2-phenylethylamine in both cells and medium change upon changing the pH of the medium. PMID:16349025